2786 files changed, 112821 insertions, 36065 deletions

diff --git a/.gitignore b/.gitignore
index cecb3b040cc..b93fb7eff94 100644
--- a/.gitignore
+++ b/.gitignore
@@ -27,6 +27,7 @@
 *.gz
 *.lzma
 *.patch
+*.gcno
 
 #
 # Top-level generic files
diff --git a/CREDITS b/CREDITS
index 2b88fb37ad5..1a41bf4addd 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1856,7 +1856,7 @@ E: rfkoenig@immd4.informatik.uni-erlangen.de
 D: The Linux Support Team Erlangen
 
 N: Andreas Koensgen
-E: ajk@iehk.rwth-aachen.de
+E: ajk@comnets.uni-bremen.de
 D: 6pack driver for AX.25
 
 N: Harald Koerfgen
@@ -2006,6 +2006,9 @@ E: paul@laufernet.com
 D: Soundblaster driver fixes, ISAPnP quirk
 S: California, USA
 
+N: Jonathan Layes
+D: ARPD support
+
 N: Tom Lees
 E: tom@lpsg.demon.co.uk
 W: http://www.lpsg.demon.co.uk/
@@ -3802,6 +3805,9 @@ S: van Bronckhorststraat 12
 S: 2612 XV Delft
 S: The Netherlands
 
+N: Thomas Woller
+D: CS461x Cirrus Logic sound driver
+
 N: David Woodhouse
 E: dwmw2@infradead.org
 D: JFFS2 file system, Memory Technology Device subsystem,
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index cbbd3e06994..5f3bedaf8e3 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -94,28 +94,37 @@ What:		/sys/block/<disk>/queue/physical_block_size
 Date:		May 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
-		This is the smallest unit the storage device can write
-		without resorting to read-modify-write operation.  It is
-		usually the same as the logical block size but may be
-		bigger.  One example is SATA drives with 4KB sectors
-		that expose a 512-byte logical block size to the
-		operating system.
+		This is the smallest unit a physical storage device can
+		write atomically.  It is usually the same as the logical
+		block size but may be bigger.  One example is SATA
+		drives with 4KB sectors that expose a 512-byte logical
+		block size to the operating system.  For stacked block
+		devices the physical_block_size variable contains the
+		maximum physical_block_size of the component devices.
 
 What:		/sys/block/<disk>/queue/minimum_io_size
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
-		Storage devices may report a preferred minimum I/O size,
-		which is the smallest request the device can perform
-		without incurring a read-modify-write penalty.  For disk
-		drives this is often the physical block size.  For RAID
-		arrays it is often the stripe chunk size.
+		Storage devices may report a granularity or preferred
+		minimum I/O size which is the smallest request the
+		device can perform without incurring a performance
+		penalty.  For disk drives this is often the physical
+		block size.  For RAID arrays it is often the stripe
+		chunk size.  A properly aligned multiple of
+		minimum_io_size is the preferred request size for
+		workloads where a high number of I/O operations is
+		desired.
 
 What:		/sys/block/<disk>/queue/optimal_io_size
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
 		Storage devices may report an optimal I/O size, which is
-		the device's preferred unit of receiving I/O.  This is
-		rarely reported for disk drives.  For RAID devices it is
-		usually the stripe width or the internal block size.
+		the device's preferred unit for sustained I/O.  This is
+		rarely reported for disk drives.  For RAID arrays it is
+		usually the stripe width or the internal track size.  A
+		properly aligned multiple of optimal_io_size is the
+		preferred request size for workloads where sustained
+		throughput is desired.  If no optimal I/O size is
+		reported this file contains 0.
diff --git a/Documentation/DocBook/kernel-hacking.tmpl b/Documentation/DocBook/kernel-hacking.tmpl
index a50d6cd5857..992e67e6be7 100644
--- a/Documentation/DocBook/kernel-hacking.tmpl
+++ b/Documentation/DocBook/kernel-hacking.tmpl
@@ -449,8 +449,8 @@ printk(KERN_INFO "i = %u\n", i);
    </para>
 
    <programlisting>
-__u32 ipaddress;
-printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress));
+__be32 ipaddress;
+printk(KERN_INFO "my ip: %pI4\n", &amp;ipaddress);
    </programlisting>
 
    <para>
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
index e3698666357..f3f37f141db 100644
--- a/Documentation/DocBook/mac80211.tmpl
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -184,8 +184,6 @@ usage should require reading the full document.
 !Finclude/net/mac80211.h ieee80211_ctstoself_get
 !Finclude/net/mac80211.h ieee80211_ctstoself_duration
 !Finclude/net/mac80211.h ieee80211_generic_frame_duration
-!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
-!Finclude/net/mac80211.h ieee80211_hdrlen
 !Finclude/net/mac80211.h ieee80211_wake_queue
 !Finclude/net/mac80211.h ieee80211_stop_queue
 !Finclude/net/mac80211.h ieee80211_wake_queues
diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt
index 93cb28d05dc..18f9651ff23 100644
--- a/Documentation/RCU/rculist_nulls.txt
+++ b/Documentation/RCU/rculist_nulls.txt
@@ -83,11 +83,12 @@ not detect it missed following items in original chain.
 obj = kmem_cache_alloc(...);
 lock_chain(); // typically a spin_lock()
 obj->key = key;
-atomic_inc(&obj->refcnt);
 /*
  * we need to make sure obj->key is updated before obj->next
+ * or obj->refcnt
  */
 smp_wmb();
+atomic_set(&obj->refcnt, 1);
 hlist_add_head_rcu(&obj->obj_node, list);
 unlock_chain(); // typically a spin_unlock()
 
@@ -159,6 +160,10 @@ out:
 obj = kmem_cache_alloc(cachep);
 lock_chain(); // typically a spin_lock()
 obj->key = key;
+/*
+ * changes to obj->key must be visible before refcnt one
+ */
+smp_wmb();
 atomic_set(&obj->refcnt, 1);
 /*
  * insert obj in RCU way (readers might be traversing chain)
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt
index 43cb1004d35..9d58c7c5edd 100644
--- a/Documentation/arm/memory.txt
+++ b/Documentation/arm/memory.txt
@@ -21,6 +21,8 @@ ffff8000	ffffffff	copy_user_page / clear_user_page use.
 				For SA11xx and Xscale, this is used to
 				setup a minicache mapping.
 
+ffff4000	ffffffff	cache aliasing on ARMv6 and later CPUs.
+
 ffff1000	ffff7fff	Reserved.
 				Platforms must not use this address range.
 
diff --git a/Documentation/block/data-integrity.txt b/Documentation/block/data-integrity.txt
index e8ca040ba2c..2d735b0ae38 100644
--- a/Documentation/block/data-integrity.txt
+++ b/Documentation/block/data-integrity.txt
@@ -50,7 +50,7 @@ encouraged them to allow separation of the data and integrity metadata
 scatter-gather lists.
 
 The controller will interleave the buffers on write and split them on
-read.  This means that the Linux can DMA the data buffers to and from
+read.  This means that Linux can DMA the data buffers to and from
 host memory without changes to the page cache.
 
 Also, the 16-bit CRC checksum mandated by both the SCSI and SATA specs
@@ -66,7 +66,7 @@ software RAID5).
 
 The IP checksum is weaker than the CRC in terms of detecting bit
 errors.  However, the strength is really in the separation of the data
-buffers and the integrity metadata.  These two distinct buffers much
+buffers and the integrity metadata.  These two distinct buffers must
 match up for an I/O to complete.
 
 The separation of the data and integrity metadata buffers as well as
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index f9ca389dddf..1d7e9784439 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -777,6 +777,18 @@ in cpuset directories:
 # /bin/echo 1-4 > cpus		-> set cpus list to cpus 1,2,3,4
 # /bin/echo 1,2,3,4 > cpus	-> set cpus list to cpus 1,2,3,4
 
+To add a CPU to a cpuset, write the new list of CPUs including the
+CPU to be added. To add 6 to the above cpuset:
+
+# /bin/echo 1-4,6 > cpus	-> set cpus list to cpus 1,2,3,4,6
+
+Similarly to remove a CPU from a cpuset, write the new list of CPUs
+without the CPU to be removed.
+
+To remove all the CPUs:
+
+# /bin/echo "" > cpus		-> clear cpus list
+
 2.3 Setting flags
 -----------------
 
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
index f688eba8770..6a5be5d5c8e 100644
--- a/Documentation/connector/cn_test.c
+++ b/Documentation/connector/cn_test.c
@@ -1,7 +1,7 @@
 /*
  * 	cn_test.c
  * 
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
  * All rights reserved.
  * 
  * This program is free software; you can redistribute it and/or modify
@@ -194,5 +194,5 @@ module_init(cn_test_init);
 module_exit(cn_test_fini);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
 MODULE_DESCRIPTION("Connector's test module");
diff --git a/Documentation/connector/ucon.c b/Documentation/connector/ucon.c
index d738cde2a8d..c5092ad0ce4 100644
--- a/Documentation/connector/ucon.c
+++ b/Documentation/connector/ucon.c
@@ -1,7 +1,7 @@
 /*
  * 	ucon.c
  *
- * Copyright (c) 2004+ Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004+ Evgeniy Polyakov <zbr@ioremap.net>
  *
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt
index 82132169d47..60120fb3b96 100644
--- a/Documentation/driver-model/driver.txt
+++ b/Documentation/driver-model/driver.txt
@@ -207,8 +207,8 @@ Attributes
 ~~~~~~~~~~
 struct driver_attribute {
         struct attribute        attr;
-        ssize_t (*show)(struct device_driver *, char * buf, size_t count, loff_t off);
-        ssize_t (*store)(struct device_driver *, const char * buf, size_t count, loff_t off);
+        ssize_t (*show)(struct device_driver *driver, char *buf);
+        ssize_t (*store)(struct device_driver *, const char * buf, size_t count);
 };
 
 Device drivers can export attributes via their sysfs directories. 
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index a52adfc9a57..3d1b0ab70c8 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -25,7 +25,7 @@ use IO::Handle;
 		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
 		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
-		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" );
+		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718" );
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -381,6 +381,57 @@ sub cx18 {
     $allfiles;
 }
 
+sub mpc718 {
+    my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip';
+    my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive";
+    my $fwfile = "dvb-cx18-mpc718-mt352.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+    wgetfile($archive, $url);
+    unzip($archive, $tmpdir);
+
+    my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys";
+    my $found = 0;
+
+    open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n";
+    binmode IN;
+    open OUT, '>', $fwfile;
+    binmode OUT;
+    {
+	# Block scope because we change the line terminator variable $/
+	my $prevlen = 0;
+	my $currlen;
+
+	# Buried in the data segment are 3 runs of almost identical
+	# register-value pairs that end in 0x5d 0x01 which is a "TUNER GO"
+	# command for the MT352.
+	# Pull out the middle run (because it's easy) of register-value
+	# pairs to make the "firmware" file.
+
+	local $/ = "\x5d\x01"; # MT352 "TUNER GO"
+
+	while (<IN>) {
+	    $currlen = length($_);
+	    if ($prevlen == $currlen && $currlen <= 64) {
+		chop; chop; # Get rid of "TUNER GO"
+		s/^\0\0//;  # get rid of leading 00 00 if it's there
+		printf OUT "$_";
+		$found = 1;
+		last;
+	    }
+	    $prevlen = $currlen;
+	}
+    }
+    close OUT;
+    close IN;
+    if (!$found) {
+	unlink $fwfile;
+	die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n";
+    }
+    $fwfile;
+}
+
 sub cx23885 {
     my $url = "http://linuxtv.org/downloads/firmware/";
 
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index f8cd450be9a..09e031c5588 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -458,3 +458,13 @@ Why:	Remove the old legacy 32bit machine check code. This has been
 	but the old version has been kept around for easier testing. Note this
 	doesn't impact the old P5 and WinChip machine check handlers.
 Who:	Andi Kleen <andi@firstfloor.org>
+
+----------------------------
+
+What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
+	exported interface anymore.
+When:	2.6.33
+Why:	cpu_policy_rwsem has a new cleaner definition making it local to
+	cpufreq core and contained inside cpufreq.c. Other dependent
+	drivers should not use it in order to safely avoid lockdep issues.
+Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
diff --git a/Documentation/filesystems/9p.txt b/Documentation/filesystems/9p.txt
index bf8080640eb..6208f55c44c 100644
--- a/Documentation/filesystems/9p.txt
+++ b/Documentation/filesystems/9p.txt
@@ -123,6 +123,9 @@ available from the same CVS repository.
 There are user and developer mailing lists available through the v9fs project
 on sourceforge (http://sourceforge.net/projects/v9fs).
 
+A stand-alone version of the module (which should build for any 2.6 kernel)
+is available via (http://github.com/ericvh/9p-sac/tree/master)
+
 News and other information is maintained on SWiK (http://swik.net/v9fs).
 
 Bug reports may be issued through the kernel.org bugzilla 
diff --git a/Documentation/filesystems/afs.txt b/Documentation/filesystems/afs.txt
index 12ad6c7f4e5..ffef91c4e0d 100644
--- a/Documentation/filesystems/afs.txt
+++ b/Documentation/filesystems/afs.txt
@@ -23,15 +23,13 @@ it does support include:
 
  (*) Security (currently only AFS kaserver and KerberosIV tickets).
 
- (*) File reading.
+ (*) File reading and writing.
 
  (*) Automounting.
 
-It does not yet support the following AFS features:
-
- (*) Write support.
+ (*) Local caching (via fscache).
 
- (*) Local caching.
+It does not yet support the following AFS features:
 
  (*) pioctl() system call.
 
@@ -56,7 +54,7 @@ They permit the debugging messages to be turned on dynamically by manipulating
 the masks in the following files:
 
 	/sys/module/af_rxrpc/parameters/debug
-	/sys/module/afs/parameters/debug
+	/sys/module/kafs/parameters/debug
 
 
 =====
@@ -66,9 +64,9 @@ USAGE
 When inserting the driver modules the root cell must be specified along with a
 list of volume location server IP addresses:
 
-	insmod af_rxrpc.o
-	insmod rxkad.o
-	insmod kafs.o rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91
+	modprobe af_rxrpc
+	modprobe rxkad
+	modprobe kafs rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91
 
 The first module is the AF_RXRPC network protocol driver.  This provides the
 RxRPC remote operation protocol and may also be accessed from userspace.  See:
@@ -81,7 +79,7 @@ is the actual filesystem driver for the AFS filesystem.
 Once the module has been loaded, more modules can be added by the following
 procedure:
 
-	echo add grand.central.org 18.7.14.88:128.2.191.224 >/proc/fs/afs/cells
+	echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells
 
 Where the parameters to the "add" command are the name of a cell and a list of
 volume location servers within that cell, with the latter separated by colons.
@@ -101,7 +99,7 @@ The name of the volume can be suffixes with ".backup" or ".readonly" to
 specify connection to only volumes of those types.
 
 The name of the cell is optional, and if not given during a mount, then the
-named volume will be looked up in the cell specified during insmod.
+named volume will be looked up in the cell specified during modprobe.
 
 Additional cells can be added through /proc (see later section).
 
@@ -163,14 +161,14 @@ THE CELL DATABASE
 
 The filesystem maintains an internal database of all the cells it knows and the
 IP addresses of the volume location servers for those cells.  The cell to which
-the system belongs is added to the database when insmod is performed by the
+the system belongs is added to the database when modprobe is performed by the
 "rootcell=" argument or, if compiled in, using a "kafs.rootcell=" argument on
 the kernel command line.
 
 Further cells can be added by commands similar to the following:
 
 	echo add CELLNAME VLADDR[:VLADDR][:VLADDR]... >/proc/fs/afs/cells
-	echo add grand.central.org 18.7.14.88:128.2.191.224 >/proc/fs/afs/cells
+	echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells
 
 No other cell database operations are available at this time.
 
@@ -233,7 +231,7 @@ insmod /tmp/kafs.o rootcell=cambridge.redhat.com:172.16.18.91
 mount -t afs \%root.afs. /afs
 mount -t afs \%cambridge.redhat.com:root.cell. /afs/cambridge.redhat.com/
 
-echo add grand.central.org 18.7.14.88:128.2.191.224 > /proc/fs/afs/cells
+echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 > /proc/fs/afs/cells
 mount -t afs "#grand.central.org:root.cell." /afs/grand.central.org/
 mount -t afs "#grand.central.org:root.archive." /afs/grand.central.org/archive
 mount -t afs "#grand.central.org:root.contrib." /afs/grand.central.org/contrib
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index fad18f9456e..ffead13f944 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1167,13 +1167,11 @@ CHAPTER 3: PER-PROCESS PARAMETERS
 3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score
 ------------------------------------------------------
 
-This file can be used to adjust the score used to select which processes should
-be killed in an out-of-memory situation.  The oom_adj value is a characteristic
-of the task's mm, so all threads that share an mm with pid will have the same
-oom_adj value.  A high value will increase the likelihood of this process being
-killed by the oom-killer.  Valid values are in the range -16 to +15 as
-explained below and a special value of -17, which disables oom-killing
-altogether for threads sharing pid's mm.
+This file can be used to adjust the score used to select which processes
+should be killed in an  out-of-memory  situation.  Giving it a high score will
+increase the likelihood of this process being killed by the oom-killer.  Valid
+values are in the range -16 to +15, plus the special value -17, which disables
+oom-killing altogether for this process.
 
 The process to be killed in an out-of-memory situation is selected among all others
 based on its badness score. This value equals the original memory size of the process
@@ -1187,9 +1185,6 @@ the parent's score if they do not share the same memory. Thus forking servers
 are the prime candidates to be killed. Having only one 'hungry' child will make
 parent less preferable than the child.
 
-/proc/<pid>/oom_adj cannot be changed for kthreads since they are immune from
-oom-killing already.
-
 /proc/<pid>/oom_score shows process' current badness score.
 
 The following heuristics are then applied:
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 7e81e37c0b1..b245d524d56 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -23,7 +23,8 @@ interface.
 Using sysfs
 ~~~~~~~~~~~
 
-sysfs is always compiled in. You can access it by doing:
+sysfs is always compiled in if CONFIG_SYSFS is defined. You can access
+it by doing:
 
     mount -t sysfs sysfs /sys 
 
diff --git a/Documentation/gcov.txt b/Documentation/gcov.txt
index e716aadb3a3..40ec6335276 100644
--- a/Documentation/gcov.txt
+++ b/Documentation/gcov.txt
@@ -188,13 +188,18 @@ Solution: Exclude affected source files from profiling by specifying
           GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the
           corresponding Makefile.
 
+Problem:  Files copied from sysfs appear empty or incomplete.
+Cause:    Due to the way seq_file works, some tools such as cp or tar
+          may not correctly copy files from sysfs.
+Solution: Use 'cat' to read .gcda files and 'cp -d' to copy links.
+          Alternatively use the mechanism shown in Appendix B.
+
 
 Appendix A: gather_on_build.sh
 ==============================
 
 Sample script to gather coverage meta files on the build machine
 (see 6a):
-
 #!/bin/bash
 
 KSRC=$1
@@ -226,7 +231,7 @@ Appendix B: gather_on_test.sh
 Sample script to gather coverage data files on the test machine
 (see 6b):
 
-#!/bin/bash
+#!/bin/bash -e
 
 DEST=$1
 GCDA=/sys/kernel/debug/gcov
@@ -236,11 +241,13 @@ if [ -z "$DEST" ] ; then
   exit 1
 fi
 
-find $GCDA -name '*.gcno' -o -name '*.gcda' | tar cfz $DEST -T -
+TEMPDIR=$(mktemp -d)
+echo Collecting data..
+find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
+find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
+find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
+tar czf $DEST -C $TEMPDIR sys
+rm -rf $TEMPDIR
 
-if [ $? -eq 0 ] ; then
-  echo "$DEST successfully created, copy to build system and unpack with:"
-  echo "  tar xfz $DEST"
-else
-  echo "Could not create file $DEST"
-fi
+echo "$DEST successfully created, copy to build system and unpack with:"
+echo "  tar xfz $DEST"
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 7bb0d934b6d..dbea4f95fc8 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -139,6 +139,7 @@ Code	Seq#	Include File		Comments
 'm'	all	linux/synclink.h	conflict!
 'm'	00-1F	net/irda/irmod.h	conflict!
 'n'	00-7F	linux/ncp_fs.h
+'n'	80-8F	linux/nilfs2_fs.h	NILFS2
 'n'	E0-FF	video/matrox.h          matroxfb
 'o'	00-1F	fs/ocfs2/ocfs2_fs.h	OCFS2
 'o'     00-03   include/mtd/ubi-user.h  conflict! (OCFS2 and UBI overlaps)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index d08759aa090..7936b801fe6 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1115,6 +1115,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			libata.dma=4	  Compact Flash DMA only 
 			Combinations also work, so libata.dma=3 enables DMA
 			for disks and CDROMs, but not CFs.
+	
+	libata.ignore_hpa=	[LIBATA] Ignore HPA limit
+			libata.ignore_hpa=0	  keep BIOS limits (default)
+			libata.ignore_hpa=1	  ignore limits, using full disk
 
 	libata.noacpi	[LIBATA] Disables use of ACPI in libata suspend/resume
 			when set.
@@ -1720,8 +1724,8 @@ and is between 256 and 4096 characters. It is defined in the file
 	oprofile.cpu_type=	Force an oprofile cpu type
 			This might be useful if you have an older oprofile
 			userland or if you want common events.
-			Format: { archperfmon }
-			archperfmon: [X86] Force use of architectural
+			Format: { arch_perfmon }
+			arch_perfmon: [X86] Force use of architectural
 				perfmon on Intel CPUs instead of the
 				CPU specific event set.
 
@@ -1915,6 +1919,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: { 0 | 1 }
 			See arch/parisc/kernel/pdc_chassis.c
 
+	percpu_alloc=	[X86] Select which percpu first chunk allocator to use.
+			Allowed values are one of "lpage", "embed" and "4k".
+			See comments in arch/x86/kernel/setup_percpu.c for
+			details on each allocator.  This parameter is primarily
+			for debugging and performance comparison.
+
 	pf.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
 
@@ -2467,7 +2477,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	tp720=		[HW,PS2]
 
-	trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size.
+	trace_buf_size=nn[KMG]
+			[FTRACE] will set tracing buffer size.
 
 	trix=		[HW,OSS] MediaTrix AudioTrix Pro
 			Format:
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
index 0112da3b9ab..89068030b01 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/kmemleak.txt
@@ -16,13 +16,17 @@ Usage
 -----
 
 CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
-thread scans the memory every 10 minutes (by default) and prints any new
-unreferenced objects found. To trigger an intermediate scan and display
-all the possible memory leaks:
+thread scans the memory every 10 minutes (by default) and prints the
+number of new unreferenced objects found. To display the details of all
+the possible memory leaks:
 
   # mount -t debugfs nodev /sys/kernel/debug/
   # cat /sys/kernel/debug/kmemleak
 
+To trigger an intermediate memory scan:
+
+  # echo scan > /sys/kernel/debug/kmemleak
+
 Note that the orphan objects are listed in the order they were allocated
 and one object at the beginning of the list may cause other subsequent
 objects to be reported as orphan.
@@ -31,16 +35,21 @@ Memory scanning parameters can be modified at run-time by writing to the
 /sys/kernel/debug/kmemleak file. The following parameters are supported:
 
   off		- disable kmemleak (irreversible)
-  stack=on	- enable the task stacks scanning
+  stack=on	- enable the task stacks scanning (default)
   stack=off	- disable the tasks stacks scanning
-  scan=on	- start the automatic memory scanning thread
+  scan=on	- start the automatic memory scanning thread (default)
   scan=off	- stop the automatic memory scanning thread
-  scan=<secs>	- set the automatic memory scanning period in seconds (0
-		  to disable it)
+  scan=<secs>	- set the automatic memory scanning period in seconds
+		  (default 600, 0 to stop the automatic scanning)
+  scan		- trigger a memory scan
 
 Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
 the kernel command line.
 
+Memory may be allocated or freed before kmemleak is initialised and
+these actions are stored in an early log buffer. The size of this buffer
+is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
+
 Basic Algorithm
 ---------------
 
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index f2296ecedb8..e2ddcdeb61b 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -36,8 +36,6 @@ detailed description):
 	- Bluetooth enable and disable
 	- video output switching, expansion control
 	- ThinkLight on and off
-	- limited docking and undocking
-	- UltraBay eject
 	- CMOS/UCMS control
 	- LED control
 	- ACPI sounds
@@ -729,131 +727,6 @@ cannot be read or if it is unknown, thinkpad-acpi will report it as "off".
 It is impossible to know if the status returned through sysfs is valid.
 
 
-Docking / undocking -- /proc/acpi/ibm/dock
-------------------------------------------
-
-Docking and undocking (e.g. with the X4 UltraBase) requires some
-actions to be taken by the operating system to safely make or break
-the electrical connections with the dock.
-
-The docking feature of this driver generates the following ACPI events:
-
-	ibm/dock GDCK 00000003 00000001 -- eject request
-	ibm/dock GDCK 00000003 00000002 -- undocked
-	ibm/dock GDCK 00000000 00000003 -- docked
-
-NOTE: These events will only be generated if the laptop was docked
-when originally booted. This is due to the current lack of support for
-hot plugging of devices in the Linux ACPI framework. If the laptop was
-booted while not in the dock, the following message is shown in the
-logs:
-
-	Mar 17 01:42:34 aero kernel: thinkpad_acpi: dock device not present
-
-In this case, no dock-related events are generated but the dock and
-undock commands described below still work. They can be executed
-manually or triggered by Fn key combinations (see the example acpid
-configuration files included in the driver tarball package available
-on the web site).
-
-When the eject request button on the dock is pressed, the first event
-above is generated. The handler for this event should issue the
-following command:
-
-	echo undock > /proc/acpi/ibm/dock
-
-After the LED on the dock goes off, it is safe to eject the laptop.
-Note: if you pressed this key by mistake, go ahead and eject the
-laptop, then dock it back in. Otherwise, the dock may not function as
-expected.
-
-When the laptop is docked, the third event above is generated. The
-handler for this event should issue the following command to fully
-enable the dock:
-
-	echo dock > /proc/acpi/ibm/dock
-
-The contents of the /proc/acpi/ibm/dock file shows the current status
-of the dock, as provided by the ACPI framework.
-
-The docking support in this driver does not take care of enabling or
-disabling any other devices you may have attached to the dock. For
-example, a CD drive plugged into the UltraBase needs to be disabled or
-enabled separately. See the provided example acpid configuration files
-for how this can be accomplished.
-
-There is no support yet for PCI devices that may be attached to a
-docking station, e.g. in the ThinkPad Dock II. The driver currently
-does not recognize, enable or disable such devices. This means that
-the only docking stations currently supported are the X-series
-UltraBase docks and "dumb" port replicators like the Mini Dock (the
-latter don't need any ACPI support, actually).
-
-
-UltraBay eject -- /proc/acpi/ibm/bay
-------------------------------------
-
-Inserting or ejecting an UltraBay device requires some actions to be
-taken by the operating system to safely make or break the electrical
-connections with the device.
-
-This feature generates the following ACPI events:
-
-	ibm/bay MSTR 00000003 00000000 -- eject request
-	ibm/bay MSTR 00000001 00000000 -- eject lever inserted
-
-NOTE: These events will only be generated if the UltraBay was present
-when the laptop was originally booted (on the X series, the UltraBay
-is in the dock, so it may not be present if the laptop was undocked).
-This is due to the current lack of support for hot plugging of devices
-in the Linux ACPI framework. If the laptop was booted without the
-UltraBay, the following message is shown in the logs:
-
-	Mar 17 01:42:34 aero kernel: thinkpad_acpi: bay device not present
-
-In this case, no bay-related events are generated but the eject
-command described below still works. It can be executed manually or
-triggered by a hot key combination.
-
-Sliding the eject lever generates the first event shown above. The
-handler for this event should take whatever actions are necessary to
-shut down the device in the UltraBay (e.g. call idectl), then issue
-the following command:
-
-	echo eject > /proc/acpi/ibm/bay
-
-After the LED on the UltraBay goes off, it is safe to pull out the
-device.
-
-When the eject lever is inserted, the second event above is
-generated. The handler for this event should take whatever actions are
-necessary to enable the UltraBay device (e.g. call idectl).
-
-The contents of the /proc/acpi/ibm/bay file shows the current status
-of the UltraBay, as provided by the ACPI framework.
-
-EXPERIMENTAL warm eject support on the 600e/x, A22p and A3x (To use
-this feature, you need to supply the experimental=1 parameter when
-loading the module):
-
-These models do not have a button near the UltraBay device to request
-a hot eject but rather require the laptop to be put to sleep
-(suspend-to-ram) before the bay device is ejected or inserted).
-The sequence of steps to eject the device is as follows:
-
-	echo eject > /proc/acpi/ibm/bay
-	put the ThinkPad to sleep
-	remove the drive
-	resume from sleep
-	cat /proc/acpi/ibm/bay should show that the drive was removed
-
-On the A3x, both the UltraBay 2000 and UltraBay Plus devices are
-supported. Use "eject2" instead of "eject" for the second bay.
-
-Note: the UltraBay eject support on the 600e/x, A22p and A3x is
-EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
-
-
 CMOS/UCMS control
 -----------------
 
diff --git a/Documentation/leds-lp3944.txt b/Documentation/leds-lp3944.txt
new file mode 100644
index 00000000000..c6eda18b15e
--- /dev/null
+++ b/Documentation/leds-lp3944.txt
@@ -0,0 +1,50 @@
+Kernel driver lp3944
+====================
+
+  * National Semiconductor LP3944 Fun-light Chip
+    Prefix: 'lp3944'
+    Addresses scanned: None (see the Notes section below)
+    Datasheet: Publicly available at the National Semiconductor website
+               http://www.national.com/pf/LP/LP3944.html
+
+Authors:
+        Antonio Ospite <ospite@studenti.unina.it>
+
+
+Description
+-----------
+The LP3944 is a helper chip that can drive up to 8 leds, with two programmable
+DIM modes; it could even be used as a gpio expander but this driver assumes it
+is used as a led controller.
+
+The DIM modes are used to set _blink_ patterns for leds, the pattern is
+specified supplying two parameters:
+  - period: from 0s to 1.6s
+  - duty cycle: percentage of the period the led is on, from 0 to 100
+
+Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern.
+See the datasheet for details.
+
+LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+leds, the camera flash light and the lcds power.
+
+
+Notes
+-----
+The chip is used mainly in embedded contexts, so this driver expects it is
+registered using the i2c_board_info mechanism.
+
+To register the chip at address 0x60 on adapter 0, set the platform data
+according to include/linux/leds-lp3944.h, set the i2c board info:
+
+	static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+		{
+			I2C_BOARD_INFO("lp3944", 0x60),
+			.platform_data = &a910_lp3944_leds,
+		},
+	};
+
+and register it in the platform init function
+
+	i2c_register_board_info(0, a910_i2c_board_info,
+			ARRAY_SIZE(a910_i2c_board_info));
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 9ebcd6ef361..950cde6d6e5 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -1,7 +1,9 @@
-/*P:100 This is the Launcher code, a simple program which lays out the
- * "physical" memory for the new Guest by mapping the kernel image and
- * the virtual devices, then opens /dev/lguest to tell the kernel
- * about the Guest and control it. :*/
+/*P:100
+ * This is the Launcher code, a simple program which lays out the "physical"
+ * memory for the new Guest by mapping the kernel image and the virtual
+ * devices, then opens /dev/lguest to tell the kernel about the Guest and
+ * control it.
+:*/
 #define _LARGEFILE64_SOURCE
 #define _GNU_SOURCE
 #include <stdio.h>
@@ -46,13 +48,15 @@
 #include "linux/virtio_rng.h"
 #include "linux/virtio_ring.h"
 #include "asm/bootparam.h"
-/*L:110 We can ignore the 39 include files we need for this program, but I do
- * want to draw attention to the use of kernel-style types.
+/*L:110
+ * We can ignore the 42 include files we need for this program, but I do want
+ * to draw attention to the use of kernel-style types.
  *
  * As Linus said, "C is a Spartan language, and so should your naming be."  I
  * like these abbreviations, so we define them here.  Note that u64 is always
  * unsigned long long, which works on all Linux systems: this means that we can
- * use %llu in printf for any u64. */
+ * use %llu in printf for any u64.
+ */
 typedef unsigned long long u64;
 typedef uint32_t u32;
 typedef uint16_t u16;
@@ -69,8 +73,10 @@ typedef uint8_t u8;
 /* This will occupy 3 pages: it must be a power of 2. */
 #define VIRTQUEUE_NUM 256
 
-/*L:120 verbose is both a global flag and a macro.  The C preprocessor allows
- * this, and although I wouldn't recommend it, it works quite nicely here. */
+/*L:120
+ * verbose is both a global flag and a macro.  The C preprocessor allows
+ * this, and although I wouldn't recommend it, it works quite nicely here.
+ */
 static bool verbose;
 #define verbose(args...) \
 	do { if (verbose) printf(args); } while(0)
@@ -87,8 +93,7 @@ static int lguest_fd;
 static unsigned int __thread cpu_id;
 
 /* This is our list of devices. */
-struct device_list
-{
+struct device_list {
 	/* Counter to assign interrupt numbers. */
 	unsigned int next_irq;
 
@@ -100,8 +105,7 @@ struct device_list
 
 	/* A single linked list of devices. */
 	struct device *dev;
-	/* And a pointer to the last device for easy append and also for
-	 * configuration appending. */
+	/* And a pointer to the last device for easy append. */
 	struct device *lastdev;
 };
 
@@ -109,8 +113,7 @@ struct device_list
 static struct device_list devices;
 
 /* The device structure describes a single device. */
-struct device
-{
+struct device {
 	/* The linked-list pointer. */
 	struct device *next;
 
@@ -135,8 +138,7 @@ struct device
 };
 
 /* The virtqueue structure describes a queue attached to a device. */
-struct virtqueue
-{
+struct virtqueue {
 	struct virtqueue *next;
 
 	/* Which device owns me. */
@@ -168,20 +170,24 @@ static char **main_args;
 /* The original tty settings to restore on exit. */
 static struct termios orig_term;
 
-/* We have to be careful with barriers: our devices are all run in separate
+/*
+ * We have to be careful with barriers: our devices are all run in separate
  * threads and so we need to make sure that changes visible to the Guest happen
- * in precise order. */
+ * in precise order.
+ */
 #define wmb() __asm__ __volatile__("" : : : "memory")
 #define mb() __asm__ __volatile__("" : : : "memory")
 
-/* Convert an iovec element to the given type.
+/*
+ * Convert an iovec element to the given type.
  *
  * This is a fairly ugly trick: we need to know the size of the type and
  * alignment requirement to check the pointer is kosher.  It's also nice to
  * have the name of the type in case we report failure.
  *
  * Typing those three things all the time is cumbersome and error prone, so we
- * have a macro which sets them all up and passes to the real function. */
+ * have a macro which sets them all up and passes to the real function.
+ */
 #define convert(iov, type) \
 	((type *)_convert((iov), sizeof(type), __alignof__(type), #type))
 
@@ -198,8 +204,10 @@ static void *_convert(struct iovec *iov, size_t size, size_t align,
 /* Wrapper for the last available index.  Makes it easier to change. */
 #define lg_last_avail(vq)	((vq)->last_avail_idx)
 
-/* The virtio configuration space is defined to be little-endian.  x86 is
- * little-endian too, but it's nice to be explicit so we have these helpers. */
+/*
+ * The virtio configuration space is defined to be little-endian.  x86 is
+ * little-endian too, but it's nice to be explicit so we have these helpers.
+ */
 #define cpu_to_le16(v16) (v16)
 #define cpu_to_le32(v32) (v32)
 #define cpu_to_le64(v64) (v64)
@@ -241,11 +249,12 @@ static u8 *get_feature_bits(struct device *dev)
 		+ dev->num_vq * sizeof(struct lguest_vqconfig);
 }
 
-/*L:100 The Launcher code itself takes us out into userspace, that scary place
- * where pointers run wild and free!  Unfortunately, like most userspace
- * programs, it's quite boring (which is why everyone likes to hack on the
- * kernel!).  Perhaps if you make up an Lguest Drinking Game at this point, it
- * will get you through this section.  Or, maybe not.
+/*L:100
+ * The Launcher code itself takes us out into userspace, that scary place where
+ * pointers run wild and free!  Unfortunately, like most userspace programs,
+ * it's quite boring (which is why everyone likes to hack on the kernel!).
+ * Perhaps if you make up an Lguest Drinking Game at this point, it will get
+ * you through this section.  Or, maybe not.
  *
  * The Launcher sets up a big chunk of memory to be the Guest's "physical"
  * memory and stores it in "guest_base".  In other words, Guest physical ==
@@ -253,7 +262,8 @@ static u8 *get_feature_bits(struct device *dev)
  *
  * This can be tough to get your head around, but usually it just means that we
  * use these trivial conversion functions when the Guest gives us it's
- * "physical" addresses: */
+ * "physical" addresses:
+ */
 static void *from_guest_phys(unsigned long addr)
 {
 	return guest_base + addr;
@@ -268,7 +278,8 @@ static unsigned long to_guest_phys(const void *addr)
  * Loading the Kernel.
  *
  * We start with couple of simple helper routines.  open_or_die() avoids
- * error-checking code cluttering the callers: */
+ * error-checking code cluttering the callers:
+ */
 static int open_or_die(const char *name, int flags)
 {
 	int fd = open(name, flags);
@@ -283,12 +294,19 @@ static void *map_zeroed_pages(unsigned int num)
 	int fd = open_or_die("/dev/zero", O_RDONLY);
 	void *addr;
 
-	/* We use a private mapping (ie. if we write to the page, it will be
-	 * copied). */
+	/*
+	 * We use a private mapping (ie. if we write to the page, it will be
+	 * copied).
+	 */
 	addr = mmap(NULL, getpagesize() * num,
 		    PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
 	if (addr == MAP_FAILED)
 		err(1, "Mmaping %u pages of /dev/zero", num);
+
+	/*
+	 * One neat mmap feature is that you can close the fd, and it
+	 * stays mapped.
+	 */
 	close(fd);
 
 	return addr;
@@ -305,20 +323,24 @@ static void *get_pages(unsigned int num)
 	return addr;
 }
 
-/* This routine is used to load the kernel or initrd.  It tries mmap, but if
+/*
+ * This routine is used to load the kernel or initrd.  It tries mmap, but if
  * that fails (Plan 9's kernel file isn't nicely aligned on page boundaries),
- * it falls back to reading the memory in. */
+ * it falls back to reading the memory in.
+ */
 static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
 {
 	ssize_t r;
 
-	/* We map writable even though for some segments are marked read-only.
+	/*
+	 * We map writable even though for some segments are marked read-only.
 	 * The kernel really wants to be writable: it patches its own
 	 * instructions.
 	 *
 	 * MAP_PRIVATE means that the page won't be copied until a write is
 	 * done to it.  This allows us to share untouched memory between
-	 * Guests. */
+	 * Guests.
+	 */
 	if (mmap(addr, len, PROT_READ|PROT_WRITE|PROT_EXEC,
 		 MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED)
 		return;
@@ -329,7 +351,8 @@ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
 		err(1, "Reading offset %lu len %lu gave %zi", offset, len, r);
 }
 
-/* This routine takes an open vmlinux image, which is in ELF, and maps it into
+/*
+ * This routine takes an open vmlinux image, which is in ELF, and maps it into
  * the Guest memory.  ELF = Embedded Linking Format, which is the format used
  * by all modern binaries on Linux including the kernel.
  *
@@ -337,23 +360,28 @@ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
  * address.  We use the physical address; the Guest will map itself to the
  * virtual address.
  *
- * We return the starting address. */
+ * We return the starting address.
+ */
 static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
 {
 	Elf32_Phdr phdr[ehdr->e_phnum];
 	unsigned int i;
 
-	/* Sanity checks on the main ELF header: an x86 executable with a
-	 * reasonable number of correctly-sized program headers. */
+	/*
+	 * Sanity checks on the main ELF header: an x86 executable with a
+	 * reasonable number of correctly-sized program headers.
+	 */
 	if (ehdr->e_type != ET_EXEC
 	    || ehdr->e_machine != EM_386
 	    || ehdr->e_phentsize != sizeof(Elf32_Phdr)
 	    || ehdr->e_phnum < 1 || ehdr->e_phnum > 65536U/sizeof(Elf32_Phdr))
 		errx(1, "Malformed elf header");
 
-	/* An ELF executable contains an ELF header and a number of "program"
+	/*
+	 * An ELF executable contains an ELF header and a number of "program"
 	 * headers which indicate which parts ("segments") of the program to
-	 * load where. */
+	 * load where.
+	 */
 
 	/* We read in all the program headers at once: */
 	if (lseek(elf_fd, ehdr->e_phoff, SEEK_SET) < 0)
@@ -361,8 +389,10 @@ static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
 	if (read(elf_fd, phdr, sizeof(phdr)) != sizeof(phdr))
 		err(1, "Reading program headers");
 
-	/* Try all the headers: there are usually only three.  A read-only one,
-	 * a read-write one, and a "note" section which we don't load. */
+	/*
+	 * Try all the headers: there are usually only three.  A read-only one,
+	 * a read-write one, and a "note" section which we don't load.
+	 */
 	for (i = 0; i < ehdr->e_phnum; i++) {
 		/* If this isn't a loadable segment, we ignore it */
 		if (phdr[i].p_type != PT_LOAD)
@@ -380,13 +410,15 @@ static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
 	return ehdr->e_entry;
 }
 
-/*L:150 A bzImage, unlike an ELF file, is not meant to be loaded.  You're
- * supposed to jump into it and it will unpack itself.  We used to have to
- * perform some hairy magic because the unpacking code scared me.
+/*L:150
+ * A bzImage, unlike an ELF file, is not meant to be loaded.  You're supposed
+ * to jump into it and it will unpack itself.  We used to have to perform some
+ * hairy magic because the unpacking code scared me.
  *
  * Fortunately, Jeremy Fitzhardinge convinced me it wasn't that hard and wrote
  * a small patch to jump over the tricky bits in the Guest, so now we just read
- * the funky header so we know where in the file to load, and away we go! */
+ * the funky header so we know where in the file to load, and away we go!
+ */
 static unsigned long load_bzimage(int fd)
 {
 	struct boot_params boot;
@@ -394,8 +426,10 @@ static unsigned long load_bzimage(int fd)
 	/* Modern bzImages get loaded at 1M. */
 	void *p = from_guest_phys(0x100000);
 
-	/* Go back to the start of the file and read the header.  It should be
-	 * a Linux boot header (see Documentation/x86/i386/boot.txt) */
+	/*
+	 * Go back to the start of the file and read the header.  It should be
+	 * a Linux boot header (see Documentation/x86/i386/boot.txt)
+	 */
 	lseek(fd, 0, SEEK_SET);
 	read(fd, &boot, sizeof(boot));
 
@@ -414,9 +448,11 @@ static unsigned long load_bzimage(int fd)
 	return boot.hdr.code32_start;
 }
 
-/*L:140 Loading the kernel is easy when it's a "vmlinux", but most kernels
+/*L:140
+ * Loading the kernel is easy when it's a "vmlinux", but most kernels
  * come wrapped up in the self-decompressing "bzImage" format.  With a little
- * work, we can load those, too. */
+ * work, we can load those, too.
+ */
 static unsigned long load_kernel(int fd)
 {
 	Elf32_Ehdr hdr;
@@ -433,24 +469,28 @@ static unsigned long load_kernel(int fd)
 	return load_bzimage(fd);
 }
 
-/* This is a trivial little helper to align pages.  Andi Kleen hated it because
+/*
+ * This is a trivial little helper to align pages.  Andi Kleen hated it because
  * it calls getpagesize() twice: "it's dumb code."
  *
  * Kernel guys get really het up about optimization, even when it's not
- * necessary.  I leave this code as a reaction against that. */
+ * necessary.  I leave this code as a reaction against that.
+ */
 static inline unsigned long page_align(unsigned long addr)
 {
 	/* Add upwards and truncate downwards. */
 	return ((addr + getpagesize()-1) & ~(getpagesize()-1));
 }
 
-/*L:180 An "initial ram disk" is a disk image loaded into memory along with
- * the kernel which the kernel can use to boot from without needing any
- * drivers.  Most distributions now use this as standard: the initrd contains
- * the code to load the appropriate driver modules for the current machine.
+/*L:180
+ * An "initial ram disk" is a disk image loaded into memory along with the
+ * kernel which the kernel can use to boot from without needing any drivers.
+ * Most distributions now use this as standard: the initrd contains the code to
+ * load the appropriate driver modules for the current machine.
  *
  * Importantly, James Morris works for RedHat, and Fedora uses initrds for its
- * kernels.  He sent me this (and tells me when I break it). */
+ * kernels.  He sent me this (and tells me when I break it).
+ */
 static unsigned long load_initrd(const char *name, unsigned long mem)
 {
 	int ifd;
@@ -462,12 +502,16 @@ static unsigned long load_initrd(const char *name, unsigned long mem)
 	if (fstat(ifd, &st) < 0)
 		err(1, "fstat() on initrd '%s'", name);
 
-	/* We map the initrd at the top of memory, but mmap wants it to be
-	 * page-aligned, so we round the size up for that. */
+	/*
+	 * We map the initrd at the top of memory, but mmap wants it to be
+	 * page-aligned, so we round the size up for that.
+	 */
 	len = page_align(st.st_size);
 	map_at(ifd, from_guest_phys(mem - len), 0, st.st_size);
-	/* Once a file is mapped, you can close the file descriptor.  It's a
-	 * little odd, but quite useful. */
+	/*
+	 * Once a file is mapped, you can close the file descriptor.  It's a
+	 * little odd, but quite useful.
+	 */
 	close(ifd);
 	verbose("mapped initrd %s size=%lu @ %p\n", name, len, (void*)mem-len);
 
@@ -476,8 +520,10 @@ static unsigned long load_initrd(const char *name, unsigned long mem)
 }
 /*:*/
 
-/* Simple routine to roll all the commandline arguments together with spaces
- * between them. */
+/*
+ * Simple routine to roll all the commandline arguments together with spaces
+ * between them.
+ */
 static void concat(char *dst, char *args[])
 {
 	unsigned int i, len = 0;
@@ -494,10 +540,12 @@ static void concat(char *dst, char *args[])
 	dst[len] = '\0';
 }
 
-/*L:185 This is where we actually tell the kernel to initialize the Guest.  We
+/*L:185
+ * This is where we actually tell the kernel to initialize the Guest.  We
  * saw the arguments it expects when we looked at initialize() in lguest_user.c:
  * the base of Guest "physical" memory, the top physical page to allow and the
- * entry point for the Guest. */
+ * entry point for the Guest.
+ */
 static void tell_kernel(unsigned long start)
 {
 	unsigned long args[] = { LHREQ_INITIALIZE,
@@ -511,7 +559,7 @@ static void tell_kernel(unsigned long start)
 }
 /*:*/
 
-/*
+/*L:200
  * Device Handling.
  *
  * When the Guest gives us a buffer, it sends an array of addresses and sizes.
@@ -522,20 +570,26 @@ static void tell_kernel(unsigned long start)
 static void *_check_pointer(unsigned long addr, unsigned int size,
 			    unsigned int line)
 {
-	/* We have to separately check addr and addr+size, because size could
-	 * be huge and addr + size might wrap around. */
+	/*
+	 * We have to separately check addr and addr+size, because size could
+	 * be huge and addr + size might wrap around.
+	 */
 	if (addr >= guest_limit || addr + size >= guest_limit)
 		errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr);
-	/* We return a pointer for the caller's convenience, now we know it's
-	 * safe to use. */
+	/*
+	 * We return a pointer for the caller's convenience, now we know it's
+	 * safe to use.
+	 */
 	return from_guest_phys(addr);
 }
 /* A macro which transparently hands the line number to the real function. */
 #define check_pointer(addr,size) _check_pointer(addr, size, __LINE__)
 
-/* Each buffer in the virtqueues is actually a chain of descriptors.  This
+/*
+ * Each buffer in the virtqueues is actually a chain of descriptors.  This
  * function returns the next descriptor in the chain, or vq->vring.num if we're
- * at the end. */
+ * at the end.
+ */
 static unsigned next_desc(struct vring_desc *desc,
 			  unsigned int i, unsigned int max)
 {
@@ -556,7 +610,10 @@ static unsigned next_desc(struct vring_desc *desc,
 	return next;
 }
 
-/* This actually sends the interrupt for this virtqueue */
+/*
+ * This actually sends the interrupt for this virtqueue, if we've used a
+ * buffer.
+ */
 static void trigger_irq(struct virtqueue *vq)
 {
 	unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
@@ -576,12 +633,14 @@ static void trigger_irq(struct virtqueue *vq)
 		err(1, "Triggering irq %i", vq->config.irq);
 }
 
-/* This looks in the virtqueue and for the first available buffer, and converts
+/*
+ * This looks in the virtqueue for the first available buffer, and converts
  * it to an iovec for convenient access.  Since descriptors consist of some
  * number of output then some number of input descriptors, it's actually two
  * iovecs, but we pack them into one and note how many of each there were.
  *
- * This function returns the descriptor number found. */
+ * This function waits if necessary, and returns the descriptor number found.
+ */
 static unsigned wait_for_vq_desc(struct virtqueue *vq,
 				 struct iovec iov[],
 				 unsigned int *out_num, unsigned int *in_num)
@@ -590,17 +649,23 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 	struct vring_desc *desc;
 	u16 last_avail = lg_last_avail(vq);
 
+	/* There's nothing available? */
 	while (last_avail == vq->vring.avail->idx) {
 		u64 event;
 
-		/* OK, tell Guest about progress up to now. */
+		/*
+		 * Since we're about to sleep, now is a good time to tell the
+		 * Guest about what we've used up to now.
+		 */
 		trigger_irq(vq);
 
 		/* OK, now we need to know about added descriptors. */
 		vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
 
-		/* They could have slipped one in as we were doing that: make
-		 * sure it's written, then check again. */
+		/*
+		 * They could have slipped one in as we were doing that: make
+		 * sure it's written, then check again.
+		 */
 		mb();
 		if (last_avail != vq->vring.avail->idx) {
 			vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
@@ -620,8 +685,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 		errx(1, "Guest moved used index from %u to %u",
 		     last_avail, vq->vring.avail->idx);
 
-	/* Grab the next descriptor number they're advertising, and increment
-	 * the index we've seen. */
+	/*
+	 * Grab the next descriptor number they're advertising, and increment
+	 * the index we've seen.
+	 */
 	head = vq->vring.avail->ring[last_avail % vq->vring.num];
 	lg_last_avail(vq)++;
 
@@ -636,8 +703,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 	desc = vq->vring.desc;
 	i = head;
 
-	/* If this is an indirect entry, then this buffer contains a descriptor
-	 * table which we handle as if it's any normal descriptor chain. */
+	/*
+	 * If this is an indirect entry, then this buffer contains a descriptor
+	 * table which we handle as if it's any normal descriptor chain.
+	 */
 	if (desc[i].flags & VRING_DESC_F_INDIRECT) {
 		if (desc[i].len % sizeof(struct vring_desc))
 			errx(1, "Invalid size for indirect buffer table");
@@ -656,8 +725,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 		if (desc[i].flags & VRING_DESC_F_WRITE)
 			(*in_num)++;
 		else {
-			/* If it's an output descriptor, they're all supposed
-			 * to come before any input descriptors. */
+			/*
+			 * If it's an output descriptor, they're all supposed
+			 * to come before any input descriptors.
+			 */
 			if (*in_num)
 				errx(1, "Descriptor has out after in");
 			(*out_num)++;
@@ -671,14 +742,19 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 	return head;
 }
 
-/* After we've used one of their buffers, we tell them about it.  We'll then
- * want to send them an interrupt, using trigger_irq(). */
+/*
+ * After we've used one of their buffers, we tell the Guest about it.  Sometime
+ * later we'll want to send them an interrupt using trigger_irq(); note that
+ * wait_for_vq_desc() does that for us if it has to wait.
+ */
 static void add_used(struct virtqueue *vq, unsigned int head, int len)
 {
 	struct vring_used_elem *used;
 
-	/* The virtqueue contains a ring of used buffers.  Get a pointer to the
-	 * next entry in that used ring. */
+	/*
+	 * The virtqueue contains a ring of used buffers.  Get a pointer to the
+	 * next entry in that used ring.
+	 */
 	used = &vq->vring.used->ring[vq->vring.used->idx % vq->vring.num];
 	used->id = head;
 	used->len = len;
@@ -698,9 +774,9 @@ static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len)
 /*
  * The Console
  *
- * We associate some data with the console for our exit hack. */
-struct console_abort
-{
+ * We associate some data with the console for our exit hack.
+ */
+struct console_abort {
 	/* How many times have they hit ^C? */
 	int count;
 	/* When did they start? */
@@ -715,30 +791,35 @@ static void console_input(struct virtqueue *vq)
 	struct console_abort *abort = vq->dev->priv;
 	struct iovec iov[vq->vring.num];
 
-	/* Make sure there's a descriptor waiting. */
+	/* Make sure there's a descriptor available. */
 	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 	if (out_num)
 		errx(1, "Output buffers in console in queue?");
 
-	/* Read it in. */
+	/* Read into it.  This is where we usually wait. */
 	len = readv(STDIN_FILENO, iov, in_num);
 	if (len <= 0) {
 		/* Ran out of input? */
 		warnx("Failed to get console input, ignoring console.");
-		/* For simplicity, dying threads kill the whole Launcher.  So
-		 * just nap here. */
+		/*
+		 * For simplicity, dying threads kill the whole Launcher.  So
+		 * just nap here.
+		 */
 		for (;;)
 			pause();
 	}
 
+	/* Tell the Guest we used a buffer. */
 	add_used_and_trigger(vq, head, len);
 
-	/* Three ^C within one second?  Exit.
+	/*
+	 * Three ^C within one second?  Exit.
 	 *
 	 * This is such a hack, but works surprisingly well.  Each ^C has to
 	 * be in a buffer by itself, so they can't be too fast.  But we check
 	 * that we get three within about a second, so they can't be too
-	 * slow. */
+	 * slow.
+	 */
 	if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) {
 		abort->count = 0;
 		return;
@@ -763,15 +844,23 @@ static void console_output(struct virtqueue *vq)
 	unsigned int head, out, in;
 	struct iovec iov[vq->vring.num];
 
+	/* We usually wait in here, for the Guest to give us something. */
 	head = wait_for_vq_desc(vq, iov, &out, &in);
 	if (in)
 		errx(1, "Input buffers in console output queue?");
+
+	/* writev can return a partial write, so we loop here. */
 	while (!iov_empty(iov, out)) {
 		int len = writev(STDOUT_FILENO, iov, out);
 		if (len <= 0)
 			err(1, "Write to stdout gave %i", len);
 		iov_consume(iov, out, len);
 	}
+
+	/*
+	 * We're finished with that buffer: if we're going to sleep,
+	 * wait_for_vq_desc() will prod the Guest with an interrupt.
+	 */
 	add_used(vq, head, 0);
 }
 
@@ -791,15 +880,30 @@ static void net_output(struct virtqueue *vq)
 	unsigned int head, out, in;
 	struct iovec iov[vq->vring.num];
 
+	/* We usually wait in here for the Guest to give us a packet. */
 	head = wait_for_vq_desc(vq, iov, &out, &in);
 	if (in)
 		errx(1, "Input buffers in net output queue?");
+	/*
+	 * Send the whole thing through to /dev/net/tun.  It expects the exact
+	 * same format: what a coincidence!
+	 */
 	if (writev(net_info->tunfd, iov, out) < 0)
 		errx(1, "Write to tun failed?");
+
+	/*
+	 * Done with that one; wait_for_vq_desc() will send the interrupt if
+	 * all packets are processed.
+	 */
 	add_used(vq, head, 0);
 }
 
-/* Will reading from this file descriptor block? */
+/*
+ * Handling network input is a bit trickier, because I've tried to optimize it.
+ *
+ * First we have a helper routine which tells is if from this file descriptor
+ * (ie. the /dev/net/tun device) will block:
+ */
 static bool will_block(int fd)
 {
 	fd_set fdset;
@@ -809,8 +913,11 @@ static bool will_block(int fd)
 	return select(fd+1, &fdset, NULL, NULL, &zero) != 1;
 }
 
-/* This is where we handle packets coming in from the tun device to our
- * Guest. */
+/*
+ * This handles packets coming in from the tun device to our Guest.  Like all
+ * service routines, it gets called again as soon as it returns, so you don't
+ * see a while(1) loop here.
+ */
 static void net_input(struct virtqueue *vq)
 {
 	int len;
@@ -818,21 +925,38 @@ static void net_input(struct virtqueue *vq)
 	struct iovec iov[vq->vring.num];
 	struct net_info *net_info = vq->dev->priv;
 
+	/*
+	 * Get a descriptor to write an incoming packet into.  This will also
+	 * send an interrupt if they're out of descriptors.
+	 */
 	head = wait_for_vq_desc(vq, iov, &out, &in);
 	if (out)
 		errx(1, "Output buffers in net input queue?");
 
-	/* Deliver interrupt now, since we're about to sleep. */
+	/*
+	 * If it looks like we'll block reading from the tun device, send them
+	 * an interrupt.
+	 */
 	if (vq->pending_used && will_block(net_info->tunfd))
 		trigger_irq(vq);
 
+	/*
+	 * Read in the packet.  This is where we normally wait (when there's no
+	 * incoming network traffic).
+	 */
 	len = readv(net_info->tunfd, iov, in);
 	if (len <= 0)
 		err(1, "Failed to read from tun.");
+
+	/*
+	 * Mark that packet buffer as used, but don't interrupt here.  We want
+	 * to wait until we've done as much work as we can.
+	 */
 	add_used(vq, head, len);
 }
+/*:*/
 
-/* This is the helper to create threads. */
+/* This is the helper to create threads: run the service routine in a loop. */
 static int do_thread(void *_vq)
 {
 	struct virtqueue *vq = _vq;
@@ -842,8 +966,10 @@ static int do_thread(void *_vq)
 	return 0;
 }
 
-/* When a child dies, we kill our entire process group with SIGTERM.  This
- * also has the side effect that the shell restores the console for us! */
+/*
+ * When a child dies, we kill our entire process group with SIGTERM.  This
+ * also has the side effect that the shell restores the console for us!
+ */
 static void kill_launcher(int signal)
 {
 	kill(0, SIGTERM);
@@ -878,11 +1004,15 @@ static void reset_device(struct device *dev)
 	signal(SIGCHLD, (void *)kill_launcher);
 }
 
+/*L:216
+ * This actually creates the thread which services the virtqueue for a device.
+ */
 static void create_thread(struct virtqueue *vq)
 {
-	/* Create stack for thread and run it.  Since stack grows
-	 * upwards, we point the stack pointer to the end of this
-	 * region. */
+	/*
+	 * Create stack for thread.  Since the stack grows upwards, we point
+	 * the stack pointer to the end of this region.
+	 */
 	char *stack = malloc(32768);
 	unsigned long args[] = { LHREQ_EVENTFD,
 				 vq->config.pfn*getpagesize(), 0 };
@@ -893,17 +1023,22 @@ static void create_thread(struct virtqueue *vq)
 		err(1, "Creating eventfd");
 	args[2] = vq->eventfd;
 
-	/* Attach an eventfd to this virtqueue: it will go off
-	 * when the Guest does an LHCALL_NOTIFY for this vq. */
+	/*
+	 * Attach an eventfd to this virtqueue: it will go off when the Guest
+	 * does an LHCALL_NOTIFY for this vq.
+	 */
 	if (write(lguest_fd, &args, sizeof(args)) != 0)
 		err(1, "Attaching eventfd");
 
-	/* CLONE_VM: because it has to access the Guest memory, and
-	 * SIGCHLD so we get a signal if it dies. */
+	/*
+	 * CLONE_VM: because it has to access the Guest memory, and SIGCHLD so
+	 * we get a signal if it dies.
+	 */
 	vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
 	if (vq->thread == (pid_t)-1)
 		err(1, "Creating clone");
-	/* We close our local copy, now the child has it. */
+
+	/* We close our local copy now the child has it. */
 	close(vq->eventfd);
 }
 
@@ -955,7 +1090,10 @@ static void update_device_status(struct device *dev)
 	}
 }
 
-/* This is the generic routine we call when the Guest uses LHCALL_NOTIFY. */
+/*L:215
+ * This is the generic routine we call when the Guest uses LHCALL_NOTIFY.  In
+ * particular, it's used to notify us of device status changes during boot.
+ */
 static void handle_output(unsigned long addr)
 {
 	struct device *i;
@@ -964,25 +1102,42 @@ static void handle_output(unsigned long addr)
 	for (i = devices.dev; i; i = i->next) {
 		struct virtqueue *vq;
 
-		/* Notifications to device descriptors update device status. */
+		/*
+		 * Notifications to device descriptors mean they updated the
+		 * device status.
+		 */
 		if (from_guest_phys(addr) == i->desc) {
 			update_device_status(i);
 			return;
 		}
 
-		/* Devices *can* be used before status is set to DRIVER_OK. */
+		/*
+		 * Devices *can* be used before status is set to DRIVER_OK.
+		 * The original plan was that they would never do this: they
+		 * would always finish setting up their status bits before
+		 * actually touching the virtqueues.  In practice, we allowed
+		 * them to, and they do (eg. the disk probes for partition
+		 * tables as part of initialization).
+		 *
+		 * If we see this, we start the device: once it's running, we
+		 * expect the device to catch all the notifications.
+		 */
 		for (vq = i->vq; vq; vq = vq->next) {
 			if (addr != vq->config.pfn*getpagesize())
 				continue;
 			if (i->running)
 				errx(1, "Notification on running %s", i->name);
+			/* This just calls create_thread() for each virtqueue */
 			start_device(i);
 			return;
 		}
 	}
 
-	/* Early console write is done using notify on a nul-terminated string
-	 * in Guest memory. */
+	/*
+	 * Early console write is done using notify on a nul-terminated string
+	 * in Guest memory.  It's also great for hacking debugging messages
+	 * into a Guest.
+	 */
 	if (addr >= guest_limit)
 		errx(1, "Bad NOTIFY %#lx", addr);
 
@@ -998,10 +1153,12 @@ static void handle_output(unsigned long addr)
  * routines to allocate and manage them.
  */
 
-/* The layout of the device page is a "struct lguest_device_desc" followed by a
+/*
+ * The layout of the device page is a "struct lguest_device_desc" followed by a
  * number of virtqueue descriptors, then two sets of feature bits, then an
  * array of configuration bytes.  This routine returns the configuration
- * pointer. */
+ * pointer.
+ */
 static u8 *device_config(const struct device *dev)
 {
 	return (void *)(dev->desc + 1)
@@ -1009,9 +1166,11 @@ static u8 *device_config(const struct device *dev)
 		+ dev->feature_len * 2;
 }
 
-/* This routine allocates a new "struct lguest_device_desc" from descriptor
+/*
+ * This routine allocates a new "struct lguest_device_desc" from descriptor
  * table page just above the Guest's normal memory.  It returns a pointer to
- * that descriptor. */
+ * that descriptor.
+ */
 static struct lguest_device_desc *new_dev_desc(u16 type)
 {
 	struct lguest_device_desc d = { .type = type };
@@ -1032,8 +1191,10 @@ static struct lguest_device_desc *new_dev_desc(u16 type)
 	return memcpy(p, &d, sizeof(d));
 }
 
-/* Each device descriptor is followed by the description of its virtqueues.  We
- * specify how many descriptors the virtqueue is to have. */
+/*
+ * Each device descriptor is followed by the description of its virtqueues.  We
+ * specify how many descriptors the virtqueue is to have.
+ */
 static void add_virtqueue(struct device *dev, unsigned int num_descs,
 			  void (*service)(struct virtqueue *))
 {
@@ -1050,6 +1211,11 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	vq->next = NULL;
 	vq->last_avail_idx = 0;
 	vq->dev = dev;
+
+	/*
+	 * This is the routine the service thread will run, and its Process ID
+	 * once it's running.
+	 */
 	vq->service = service;
 	vq->thread = (pid_t)-1;
 
@@ -1061,10 +1227,12 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	/* Initialize the vring. */
 	vring_init(&vq->vring, num_descs, p, LGUEST_VRING_ALIGN);
 
-	/* Append virtqueue to this device's descriptor.  We use
+	/*
+	 * Append virtqueue to this device's descriptor.  We use
 	 * device_config() to get the end of the device's current virtqueues;
 	 * we check that we haven't added any config or feature information
-	 * yet, otherwise we'd be overwriting them. */
+	 * yet, otherwise we'd be overwriting them.
+	 */
 	assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
 	memcpy(device_config(dev), &vq->config, sizeof(vq->config));
 	dev->num_vq++;
@@ -1072,14 +1240,18 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 
 	verbose("Virtqueue page %#lx\n", to_guest_phys(p));
 
-	/* Add to tail of list, so dev->vq is first vq, dev->vq->next is
-	 * second.  */
+	/*
+	 * Add to tail of list, so dev->vq is first vq, dev->vq->next is
+	 * second.
+	 */
 	for (i = &dev->vq; *i; i = &(*i)->next);
 	*i = vq;
 }
 
-/* The first half of the feature bitmask is for us to advertise features.  The
- * second half is for the Guest to accept features. */
+/*
+ * The first half of the feature bitmask is for us to advertise features.  The
+ * second half is for the Guest to accept features.
+ */
 static void add_feature(struct device *dev, unsigned bit)
 {
 	u8 *features = get_feature_bits(dev);
@@ -1093,9 +1265,11 @@ static void add_feature(struct device *dev, unsigned bit)
 	features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
 }
 
-/* This routine sets the configuration fields for an existing device's
+/*
+ * This routine sets the configuration fields for an existing device's
  * descriptor.  It only works for the last device, but that's OK because that's
- * how we use it. */
+ * how we use it.
+ */
 static void set_config(struct device *dev, unsigned len, const void *conf)
 {
 	/* Check we haven't overflowed our single page. */
@@ -1105,12 +1279,18 @@ static void set_config(struct device *dev, unsigned len, const void *conf)
 	/* Copy in the config information, and store the length. */
 	memcpy(device_config(dev), conf, len);
 	dev->desc->config_len = len;
+
+	/* Size must fit in config_len field (8 bits)! */
+	assert(dev->desc->config_len == len);
 }
 
-/* This routine does all the creation and setup of a new device, including
- * calling new_dev_desc() to allocate the descriptor and device memory.
+/*
+ * This routine does all the creation and setup of a new device, including
+ * calling new_dev_desc() to allocate the descriptor and device memory.  We
+ * don't actually start the service threads until later.
  *
- * See what I mean about userspace being boring? */
+ * See what I mean about userspace being boring?
+ */
 static struct device *new_device(const char *name, u16 type)
 {
 	struct device *dev = malloc(sizeof(*dev));
@@ -1123,10 +1303,12 @@ static struct device *new_device(const char *name, u16 type)
 	dev->num_vq = 0;
 	dev->running = false;
 
-	/* Append to device list.  Prepending to a single-linked list is
+	/*
+	 * Append to device list.  Prepending to a single-linked list is
 	 * easier, but the user expects the devices to be arranged on the bus
 	 * in command-line order.  The first network device on the command line
-	 * is eth0, the first block device /dev/vda, etc. */
+	 * is eth0, the first block device /dev/vda, etc.
+	 */
 	if (devices.lastdev)
 		devices.lastdev->next = dev;
 	else
@@ -1136,8 +1318,10 @@ static struct device *new_device(const char *name, u16 type)
 	return dev;
 }
 
-/* Our first setup routine is the console.  It's a fairly simple device, but
- * UNIX tty handling makes it uglier than it could be. */
+/*
+ * Our first setup routine is the console.  It's a fairly simple device, but
+ * UNIX tty handling makes it uglier than it could be.
+ */
 static void setup_console(void)
 {
 	struct device *dev;
@@ -1145,8 +1329,10 @@ static void setup_console(void)
 	/* If we can save the initial standard input settings... */
 	if (tcgetattr(STDIN_FILENO, &orig_term) == 0) {
 		struct termios term = orig_term;
-		/* Then we turn off echo, line buffering and ^C etc.  We want a
-		 * raw input stream to the Guest. */
+		/*
+		 * Then we turn off echo, line buffering and ^C etc: We want a
+		 * raw input stream to the Guest.
+		 */
 		term.c_lflag &= ~(ISIG|ICANON|ECHO);
 		tcsetattr(STDIN_FILENO, TCSANOW, &term);
 	}
@@ -1157,10 +1343,12 @@ static void setup_console(void)
 	dev->priv = malloc(sizeof(struct console_abort));
 	((struct console_abort *)dev->priv)->count = 0;
 
-	/* The console needs two virtqueues: the input then the output.  When
+	/*
+	 * The console needs two virtqueues: the input then the output.  When
 	 * they put something the input queue, we make sure we're listening to
 	 * stdin.  When they put something in the output queue, we write it to
-	 * stdout. */
+	 * stdout.
+	 */
 	add_virtqueue(dev, VIRTQUEUE_NUM, console_input);
 	add_virtqueue(dev, VIRTQUEUE_NUM, console_output);
 
@@ -1168,7 +1356,8 @@ static void setup_console(void)
 }
 /*:*/
 
-/*M:010 Inter-guest networking is an interesting area.  Simplest is to have a
+/*M:010
+ * Inter-guest networking is an interesting area.  Simplest is to have a
  * --sharenet=<name> option which opens or creates a named pipe.  This can be
  * used to send packets to another guest in a 1:1 manner.
  *
@@ -1182,7 +1371,8 @@ static void setup_console(void)
  * multiple inter-guest channels behind one interface, although it would
  * require some manner of hotplugging new virtio channels.
  *
- * Finally, we could implement a virtio network switch in the kernel. :*/
+ * Finally, we could implement a virtio network switch in the kernel.
+:*/
 
 static u32 str2ip(const char *ipaddr)
 {
@@ -1207,11 +1397,13 @@ static void str2mac(const char *macaddr, unsigned char mac[6])
 	mac[5] = m[5];
 }
 
-/* This code is "adapted" from libbridge: it attaches the Host end of the
+/*
+ * This code is "adapted" from libbridge: it attaches the Host end of the
  * network device to the bridge device specified by the command line.
  *
  * This is yet another James Morris contribution (I'm an IP-level guy, so I
- * dislike bridging), and I just try not to break it. */
+ * dislike bridging), and I just try not to break it.
+ */
 static void add_to_bridge(int fd, const char *if_name, const char *br_name)
 {
 	int ifidx;
@@ -1231,9 +1423,11 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
 		err(1, "can't add %s to bridge %s", if_name, br_name);
 }
 
-/* This sets up the Host end of the network device with an IP address, brings
+/*
+ * This sets up the Host end of the network device with an IP address, brings
  * it up so packets will flow, the copies the MAC address into the hwaddr
- * pointer. */
+ * pointer.
+ */
 static void configure_device(int fd, const char *tapif, u32 ipaddr)
 {
 	struct ifreq ifr;
@@ -1260,10 +1454,12 @@ static int get_tun_device(char tapif[IFNAMSIZ])
 	/* Start with this zeroed.  Messy but sure. */
 	memset(&ifr, 0, sizeof(ifr));
 
-	/* We open the /dev/net/tun device and tell it we want a tap device.  A
+	/*
+	 * We open the /dev/net/tun device and tell it we want a tap device.  A
 	 * tap device is like a tun device, only somehow different.  To tell
 	 * the truth, I completely blundered my way through this code, but it
-	 * works now! */
+	 * works now!
+	 */
 	netfd = open_or_die("/dev/net/tun", O_RDWR);
 	ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
 	strcpy(ifr.ifr_name, "tap%d");
@@ -1274,18 +1470,22 @@ static int get_tun_device(char tapif[IFNAMSIZ])
 		  TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0)
 		err(1, "Could not set features for tun device");
 
-	/* We don't need checksums calculated for packets coming in this
-	 * device: trust us! */
+	/*
+	 * We don't need checksums calculated for packets coming in this
+	 * device: trust us!
+	 */
 	ioctl(netfd, TUNSETNOCSUM, 1);
 
 	memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
 	return netfd;
 }
 
-/*L:195 Our network is a Host<->Guest network.  This can either use bridging or
+/*L:195
+ * Our network is a Host<->Guest network.  This can either use bridging or
  * routing, but the principle is the same: it uses the "tun" device to inject
  * packets into the Host as if they came in from a normal network card.  We
- * just shunt packets between the Guest and the tun device. */
+ * just shunt packets between the Guest and the tun device.
+ */
 static void setup_tun_net(char *arg)
 {
 	struct device *dev;
@@ -1302,13 +1502,14 @@ static void setup_tun_net(char *arg)
 	dev = new_device("net", VIRTIO_ID_NET);
 	dev->priv = net_info;
 
-	/* Network devices need a receive and a send queue, just like
-	 * console. */
+	/* Network devices need a recv and a send queue, just like console. */
 	add_virtqueue(dev, VIRTQUEUE_NUM, net_input);
 	add_virtqueue(dev, VIRTQUEUE_NUM, net_output);
 
-	/* We need a socket to perform the magic network ioctls to bring up the
-	 * tap interface, connect to the bridge etc.  Any socket will do! */
+	/*
+	 * We need a socket to perform the magic network ioctls to bring up the
+	 * tap interface, connect to the bridge etc.  Any socket will do!
+	 */
 	ipfd = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
 	if (ipfd < 0)
 		err(1, "opening IP socket");
@@ -1362,39 +1563,31 @@ static void setup_tun_net(char *arg)
 		verbose("device %u: tun %s: %s\n",
 			devices.device_num, tapif, arg);
 }
-
-/* Our block (disk) device should be really simple: the Guest asks for a block
- * number and we read or write that position in the file.  Unfortunately, that
- * was amazingly slow: the Guest waits until the read is finished before
- * running anything else, even if it could have been doing useful work.
- *
- * We could use async I/O, except it's reputed to suck so hard that characters
- * actually go missing from your code when you try to use it.
- *
- * So we farm the I/O out to thread, and communicate with it via a pipe. */
+/*:*/
 
 /* This hangs off device->priv. */
-struct vblk_info
-{
+struct vblk_info {
 	/* The size of the file. */
 	off64_t len;
 
 	/* The file descriptor for the file. */
 	int fd;
 
-	/* IO thread listens on this file descriptor [0]. */
-	int workpipe[2];
-
-	/* IO thread writes to this file descriptor to mark it done, then
-	 * Launcher triggers interrupt to Guest. */
-	int done_fd;
 };
 
 /*L:210
  * The Disk
  *
- * Remember that the block device is handled by a separate I/O thread.  We head
- * straight into the core of that thread here:
+ * The disk only has one virtqueue, so it only has one thread.  It is really
+ * simple: the Guest asks for a block number and we read or write that position
+ * in the file.
+ *
+ * Before we serviced each virtqueue in a separate thread, that was unacceptably
+ * slow: the Guest waits until the read is finished before running anything
+ * else, even if it could have been doing useful work.
+ *
+ * We could have used async I/O, except it's reputed to suck so hard that
+ * characters actually go missing from your code when you try to use it.
  */
 static void blk_request(struct virtqueue *vq)
 {
@@ -1406,47 +1599,64 @@ static void blk_request(struct virtqueue *vq)
 	struct iovec iov[vq->vring.num];
 	off64_t off;
 
-	/* Get the next request. */
+	/*
+	 * Get the next request, where we normally wait.  It triggers the
+	 * interrupt to acknowledge previously serviced requests (if any).
+	 */
 	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 
-	/* Every block request should contain at least one output buffer
+	/*
+	 * Every block request should contain at least one output buffer
 	 * (detailing the location on disk and the type of request) and one
-	 * input buffer (to hold the result). */
+	 * input buffer (to hold the result).
+	 */
 	if (out_num == 0 || in_num == 0)
 		errx(1, "Bad virtblk cmd %u out=%u in=%u",
 		     head, out_num, in_num);
 
 	out = convert(&iov[0], struct virtio_blk_outhdr);
 	in = convert(&iov[out_num+in_num-1], u8);
+	/*
+	 * For historical reasons, block operations are expressed in 512 byte
+	 * "sectors".
+	 */
 	off = out->sector * 512;
 
-	/* The block device implements "barriers", where the Guest indicates
+	/*
+	 * The block device implements "barriers", where the Guest indicates
 	 * that it wants all previous writes to occur before this write.  We
 	 * don't have a way of asking our kernel to do a barrier, so we just
-	 * synchronize all the data in the file.  Pretty poor, no? */
+	 * synchronize all the data in the file.  Pretty poor, no?
+	 */
 	if (out->type & VIRTIO_BLK_T_BARRIER)
 		fdatasync(vblk->fd);
 
-	/* In general the virtio block driver is allowed to try SCSI commands.
-	 * It'd be nice if we supported eject, for example, but we don't. */
+	/*
+	 * In general the virtio block driver is allowed to try SCSI commands.
+	 * It'd be nice if we supported eject, for example, but we don't.
+	 */
 	if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
 		fprintf(stderr, "Scsi commands unsupported\n");
 		*in = VIRTIO_BLK_S_UNSUPP;
 		wlen = sizeof(*in);
 	} else if (out->type & VIRTIO_BLK_T_OUT) {
-		/* Write */
-
-		/* Move to the right location in the block file.  This can fail
-		 * if they try to write past end. */
+		/*
+		 * Write
+		 *
+		 * Move to the right location in the block file.  This can fail
+		 * if they try to write past end.
+		 */
 		if (lseek64(vblk->fd, off, SEEK_SET) != off)
 			err(1, "Bad seek to sector %llu", out->sector);
 
 		ret = writev(vblk->fd, iov+1, out_num-1);
 		verbose("WRITE to sector %llu: %i\n", out->sector, ret);
 
-		/* Grr... Now we know how long the descriptor they sent was, we
+		/*
+		 * Grr... Now we know how long the descriptor they sent was, we
 		 * make sure they didn't try to write over the end of the block
-		 * file (possibly extending it). */
+		 * file (possibly extending it).
+		 */
 		if (ret > 0 && off + ret > vblk->len) {
 			/* Trim it back to the correct length */
 			ftruncate64(vblk->fd, vblk->len);
@@ -1456,10 +1666,12 @@ static void blk_request(struct virtqueue *vq)
 		wlen = sizeof(*in);
 		*in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
 	} else {
-		/* Read */
-
-		/* Move to the right location in the block file.  This can fail
-		 * if they try to read past end. */
+		/*
+		 * Read
+		 *
+		 * Move to the right location in the block file.  This can fail
+		 * if they try to read past end.
+		 */
 		if (lseek64(vblk->fd, off, SEEK_SET) != off)
 			err(1, "Bad seek to sector %llu", out->sector);
 
@@ -1474,13 +1686,16 @@ static void blk_request(struct virtqueue *vq)
 		}
 	}
 
-	/* OK, so we noted that it was pretty poor to use an fdatasync as a
+	/*
+	 * OK, so we noted that it was pretty poor to use an fdatasync as a
 	 * barrier.  But Christoph Hellwig points out that we need a sync
 	 * *afterwards* as well: "Barriers specify no reordering to the front
-	 * or the back."  And Jens Axboe confirmed it, so here we are: */
+	 * or the back."  And Jens Axboe confirmed it, so here we are:
+	 */
 	if (out->type & VIRTIO_BLK_T_BARRIER)
 		fdatasync(vblk->fd);
 
+	/* Finished that request. */
 	add_used(vq, head, wlen);
 }
 
@@ -1491,7 +1706,7 @@ static void setup_block_file(const char *filename)
 	struct vblk_info *vblk;
 	struct virtio_blk_config conf;
 
-	/* The device responds to return from I/O thread. */
+	/* Creat the device. */
 	dev = new_device("block", VIRTIO_ID_BLOCK);
 
 	/* The device has one virtqueue, where the Guest places requests. */
@@ -1510,27 +1725,32 @@ static void setup_block_file(const char *filename)
 	/* Tell Guest how many sectors this device has. */
 	conf.capacity = cpu_to_le64(vblk->len / 512);
 
-	/* Tell Guest not to put in too many descriptors at once: two are used
-	 * for the in and out elements. */
+	/*
+	 * Tell Guest not to put in too many descriptors at once: two are used
+	 * for the in and out elements.
+	 */
 	add_feature(dev, VIRTIO_BLK_F_SEG_MAX);
 	conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2);
 
-	set_config(dev, sizeof(conf), &conf);
+	/* Don't try to put whole struct: we have 8 bit limit. */
+	set_config(dev, offsetof(struct virtio_blk_config, geometry), &conf);
 
 	verbose("device %u: virtblock %llu sectors\n",
 		++devices.device_num, le64_to_cpu(conf.capacity));
 }
 
-struct rng_info {
-	int rfd;
-};
-
-/* Our random number generator device reads from /dev/random into the Guest's
+/*L:211
+ * Our random number generator device reads from /dev/random into the Guest's
  * input buffers.  The usual case is that the Guest doesn't want random numbers
  * and so has no buffers although /dev/random is still readable, whereas
  * console is the reverse.
  *
- * The same logic applies, however. */
+ * The same logic applies, however.
+ */
+struct rng_info {
+	int rfd;
+};
+
 static void rng_input(struct virtqueue *vq)
 {
 	int len;
@@ -1543,9 +1763,10 @@ static void rng_input(struct virtqueue *vq)
 	if (out_num)
 		errx(1, "Output buffers in rng?");
 
-	/* This is why we convert to iovecs: the readv() call uses them, and so
-	 * it reads straight into the Guest's buffer.  We loop to make sure we
-	 * fill it. */
+	/*
+	 * Just like the console write, we loop to cover the whole iovec.
+	 * In this case, short reads actually happen quite a bit.
+	 */
 	while (!iov_empty(iov, in_num)) {
 		len = readv(rng_info->rfd, iov, in_num);
 		if (len <= 0)
@@ -1558,15 +1779,18 @@ static void rng_input(struct virtqueue *vq)
 	add_used(vq, head, totlen);
 }
 
-/* And this creates a "hardware" random number device for the Guest. */
+/*L:199
+ * This creates a "hardware" random number device for the Guest.
+ */
 static void setup_rng(void)
 {
 	struct device *dev;
 	struct rng_info *rng_info = malloc(sizeof(*rng_info));
 
+	/* Our device's privat info simply contains the /dev/random fd. */
 	rng_info->rfd = open_or_die("/dev/random", O_RDONLY);
 
-	/* The device responds to return from I/O thread. */
+	/* Create the new device. */
 	dev = new_device("rng", VIRTIO_ID_RNG);
 	dev->priv = rng_info;
 
@@ -1582,8 +1806,10 @@ static void __attribute__((noreturn)) restart_guest(void)
 {
 	unsigned int i;
 
-	/* Since we don't track all open fds, we simply close everything beyond
-	 * stderr. */
+	/*
+	 * Since we don't track all open fds, we simply close everything beyond
+	 * stderr.
+	 */
 	for (i = 3; i < FD_SETSIZE; i++)
 		close(i);
 
@@ -1594,8 +1820,10 @@ static void __attribute__((noreturn)) restart_guest(void)
 	err(1, "Could not exec %s", main_args[0]);
 }
 
-/*L:220 Finally we reach the core of the Launcher which runs the Guest, serves
- * its input and output, and finally, lays it to rest. */
+/*L:220
+ * Finally we reach the core of the Launcher which runs the Guest, serves
+ * its input and output, and finally, lays it to rest.
+ */
 static void __attribute__((noreturn)) run_guest(void)
 {
 	for (;;) {
@@ -1630,7 +1858,7 @@ static void __attribute__((noreturn)) run_guest(void)
  *
  * Are you ready?  Take a deep breath and join me in the core of the Host, in
  * "make Host".
- :*/
+:*/
 
 static struct option opts[] = {
 	{ "verbose", 0, NULL, 'v' },
@@ -1651,8 +1879,7 @@ static void usage(void)
 /*L:105 The main routine is where the real work begins: */
 int main(int argc, char *argv[])
 {
-	/* Memory, top-level pagetable, code startpoint and size of the
-	 * (optional) initrd. */
+	/* Memory, code startpoint and size of the (optional) initrd. */
 	unsigned long mem = 0, start, initrd_size = 0;
 	/* Two temporaries. */
 	int i, c;
@@ -1664,24 +1891,32 @@ int main(int argc, char *argv[])
 	/* Save the args: we "reboot" by execing ourselves again. */
 	main_args = argv;
 
-	/* First we initialize the device list.  We keep a pointer to the last
+	/*
+	 * First we initialize the device list.  We keep a pointer to the last
 	 * device, and the next interrupt number to use for devices (1:
-	 * remember that 0 is used by the timer). */
+	 * remember that 0 is used by the timer).
+	 */
 	devices.lastdev = NULL;
 	devices.next_irq = 1;
 
+	/* We're CPU 0.  In fact, that's the only CPU possible right now. */
 	cpu_id = 0;
-	/* We need to know how much memory so we can set up the device
+
+	/*
+	 * We need to know how much memory so we can set up the device
 	 * descriptor and memory pages for the devices as we parse the command
 	 * line.  So we quickly look through the arguments to find the amount
-	 * of memory now. */
+	 * of memory now.
+	 */
 	for (i = 1; i < argc; i++) {
 		if (argv[i][0] != '-') {
 			mem = atoi(argv[i]) * 1024 * 1024;
-			/* We start by mapping anonymous pages over all of
+			/*
+			 * We start by mapping anonymous pages over all of
 			 * guest-physical memory range.  This fills it with 0,
 			 * and ensures that the Guest won't be killed when it
-			 * tries to access it. */
+			 * tries to access it.
+			 */
 			guest_base = map_zeroed_pages(mem / getpagesize()
 						      + DEVICE_PAGES);
 			guest_limit = mem;
@@ -1714,8 +1949,10 @@ int main(int argc, char *argv[])
 			usage();
 		}
 	}
-	/* After the other arguments we expect memory and kernel image name,
-	 * followed by command line arguments for the kernel. */
+	/*
+	 * After the other arguments we expect memory and kernel image name,
+	 * followed by command line arguments for the kernel.
+	 */
 	if (optind + 2 > argc)
 		usage();
 
@@ -1733,20 +1970,26 @@ int main(int argc, char *argv[])
 	/* Map the initrd image if requested (at top of physical memory) */
 	if (initrd_name) {
 		initrd_size = load_initrd(initrd_name, mem);
-		/* These are the location in the Linux boot header where the
-		 * start and size of the initrd are expected to be found. */
+		/*
+		 * These are the location in the Linux boot header where the
+		 * start and size of the initrd are expected to be found.
+		 */
 		boot->hdr.ramdisk_image = mem - initrd_size;
 		boot->hdr.ramdisk_size = initrd_size;
 		/* The bootloader type 0xFF means "unknown"; that's OK. */
 		boot->hdr.type_of_loader = 0xFF;
 	}
 
-	/* The Linux boot header contains an "E820" memory map: ours is a
-	 * simple, single region. */
+	/*
+	 * The Linux boot header contains an "E820" memory map: ours is a
+	 * simple, single region.
+	 */
 	boot->e820_entries = 1;
 	boot->e820_map[0] = ((struct e820entry) { 0, mem, E820_RAM });
-	/* The boot header contains a command line pointer: we put the command
-	 * line after the boot header. */
+	/*
+	 * The boot header contains a command line pointer: we put the command
+	 * line after the boot header.
+	 */
 	boot->hdr.cmd_line_ptr = to_guest_phys(boot + 1);
 	/* We use a simple helper to copy the arguments separated by spaces. */
 	concat((char *)(boot + 1), argv+optind+2);
@@ -1760,11 +2003,13 @@ int main(int argc, char *argv[])
 	/* Tell the entry path not to try to reload segment registers. */
 	boot->hdr.loadflags |= KEEP_SEGMENTS;
 
-	/* We tell the kernel to initialize the Guest: this returns the open
-	 * /dev/lguest file descriptor. */
+	/*
+	 * We tell the kernel to initialize the Guest: this returns the open
+	 * /dev/lguest file descriptor.
+	 */
 	tell_kernel(start);
 
-	/* Ensure that we terminate if a child dies. */
+	/* Ensure that we terminate if a device-servicing child dies. */
 	signal(SIGCHLD, kill_launcher);
 
 	/* If we exit via err(), this kills all the threads, restores tty. */
diff --git a/Documentation/lockdep-design.txt b/Documentation/lockdep-design.txt
index e20d913d591..abf768c681e 100644
--- a/Documentation/lockdep-design.txt
+++ b/Documentation/lockdep-design.txt
@@ -30,9 +30,9 @@ State
 The validator tracks lock-class usage history into 4n + 1 separate state bits:
 
 - 'ever held in STATE context'
-- 'ever head as readlock in STATE context'
-- 'ever head with STATE enabled'
-- 'ever head as readlock with STATE enabled'
+- 'ever held as readlock in STATE context'
+- 'ever held with STATE enabled'
+- 'ever held as readlock with STATE enabled'
 
 Where STATE can be either one of (kernel/lockdep_states.h)
  - hardirq
diff --git a/Documentation/networking/6pack.txt b/Documentation/networking/6pack.txt
index d0777a1200e..8f339428fdf 100644
--- a/Documentation/networking/6pack.txt
+++ b/Documentation/networking/6pack.txt
@@ -1,7 +1,7 @@
 This is the 6pack-mini-HOWTO, written by
 
 Andreas Könsgen DG3KQ
-Internet: ajk@iehk.rwth-aachen.de
+Internet: ajk@comnets.uni-bremen.de
 AMPR-net: dg3kq@db0pra.ampr.org
 AX.25:    dg3kq@db0ach.#nrw.deu.eu
 
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 8d999d862d0..79f533f38c6 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1238,1122 +1238,7 @@ descriptions for the SOC devices for which new nodes have been
 defined; this list will expand as more and more SOC-containing
 platforms are moved over to use the flattened-device-tree model.
 
-   a) PHY nodes
-
-   Required properties:
-
-    - device_type : Should be "ethernet-phy"
-    - interrupts : <a b> where a is the interrupt number and b is a
-      field that represents an encoding of the sense and level
-      information for the interrupt.  This should be encoded based on
-      the information in section 2) depending on the type of interrupt
-      controller you have.
-    - interrupt-parent : the phandle for the interrupt controller that
-      services interrupts for this device.
-    - reg : The ID number for the phy, usually a small integer
-    - linux,phandle :  phandle for this node; likely referenced by an
-      ethernet controller node.
-
-
-   Example:
-
-	ethernet-phy@0 {
-		linux,phandle = <2452000>
-		interrupt-parent = <40000>;
-		interrupts = <35 1>;
-		reg = <0>;
-		device_type = "ethernet-phy";
-	};
-
-
-   b) Interrupt controllers
-
-   Some SOC devices contain interrupt controllers that are different
-   from the standard Open PIC specification.  The SOC device nodes for
-   these types of controllers should be specified just like a standard
-   OpenPIC controller.  Sense and level information should be encoded
-   as specified in section 2) of this chapter for each device that
-   specifies an interrupt.
-
-   Example :
-
-	pic@40000 {
-		linux,phandle = <40000>;
-		interrupt-controller;
-		#address-cells = <0>;
-		reg = <40000 40000>;
-		compatible = "chrp,open-pic";
-		device_type = "open-pic";
-	};
-
-    c) 4xx/Axon EMAC ethernet nodes
-
-    The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
-    the Axon bridge.  To operate this needs to interact with a ths
-    special McMAL DMA controller, and sometimes an RGMII or ZMII
-    interface.  In addition to the nodes and properties described
-    below, the node for the OPB bus on which the EMAC sits must have a
-    correct clock-frequency property.
-
-      i) The EMAC node itself
-
-    Required properties:
-    - device_type       : "network"
-
-    - compatible        : compatible list, contains 2 entries, first is
-			  "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
-			  405gp, Axon) and second is either "ibm,emac" or
-			  "ibm,emac4".  For Axon, thus, we have: "ibm,emac-axon",
-			  "ibm,emac4"
-    - interrupts        : <interrupt mapping for EMAC IRQ and WOL IRQ>
-    - interrupt-parent  : optional, if needed for interrupt mapping
-    - reg               : <registers mapping>
-    - local-mac-address : 6 bytes, MAC address
-    - mal-device        : phandle of the associated McMAL node
-    - mal-tx-channel    : 1 cell, index of the tx channel on McMAL associated
-			  with this EMAC
-    - mal-rx-channel    : 1 cell, index of the rx channel on McMAL associated
-			  with this EMAC
-    - cell-index        : 1 cell, hardware index of the EMAC cell on a given
-			  ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
-			  each Axon chip)
-    - max-frame-size    : 1 cell, maximum frame size supported in bytes
-    - rx-fifo-size      : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
-			  operations.
-			  For Axon, 2048
-    - tx-fifo-size      : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
-			  operations.
-			  For Axon, 2048.
-    - fifo-entry-size   : 1 cell, size of a fifo entry (used to calculate
-			  thresholds).
-			  For Axon, 0x00000010
-    - mal-burst-size    : 1 cell, MAL burst size (used to calculate thresholds)
-			  in bytes.
-			  For Axon, 0x00000100 (I think ...)
-    - phy-mode          : string, mode of operations of the PHY interface.
-			  Supported values are: "mii", "rmii", "smii", "rgmii",
-			  "tbi", "gmii", rtbi", "sgmii".
-			  For Axon on CAB, it is "rgmii"
-    - mdio-device       : 1 cell, required iff using shared MDIO registers
-			  (440EP).  phandle of the EMAC to use to drive the
-			  MDIO lines for the PHY used by this EMAC.
-    - zmii-device       : 1 cell, required iff connected to a ZMII.  phandle of
-			  the ZMII device node
-    - zmii-channel      : 1 cell, required iff connected to a ZMII.  Which ZMII
-			  channel or 0xffffffff if ZMII is only used for MDIO.
-    - rgmii-device      : 1 cell, required iff connected to an RGMII. phandle
-			  of the RGMII device node.
-			  For Axon: phandle of plb5/plb4/opb/rgmii
-    - rgmii-channel     : 1 cell, required iff connected to an RGMII.  Which
-			  RGMII channel is used by this EMAC.
-			  Fox Axon: present, whatever value is appropriate for each
-			  EMAC, that is the content of the current (bogus) "phy-port"
-			  property.
-
-    Optional properties:
-    - phy-address       : 1 cell, optional, MDIO address of the PHY. If absent,
-			  a search is performed.
-    - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
-			  for, used if phy-address is absent. bit 0x00000001 is
-			  MDIO address 0.
-			  For Axon it can be absent, though my current driver
-			  doesn't handle phy-address yet so for now, keep
-			  0x00ffffff in it.
-    - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
-			  operations (if absent the value is the same as
-			  rx-fifo-size).  For Axon, either absent or 2048.
-    - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
-			  operations (if absent the value is the same as
-			  tx-fifo-size). For Axon, either absent or 2048.
-    - tah-device        : 1 cell, optional. If connected to a TAH engine for
-			  offload, phandle of the TAH device node.
-    - tah-channel       : 1 cell, optional. If appropriate, channel used on the
-			  TAH engine.
-
-    Example:
-
-	EMAC0: ethernet@40000800 {
-		device_type = "network";
-		compatible = "ibm,emac-440gp", "ibm,emac";
-		interrupt-parent = <&UIC1>;
-		interrupts = <1c 4 1d 4>;
-		reg = <40000800 70>;
-		local-mac-address = [00 04 AC E3 1B 1E];
-		mal-device = <&MAL0>;
-		mal-tx-channel = <0 1>;
-		mal-rx-channel = <0>;
-		cell-index = <0>;
-		max-frame-size = <5dc>;
-		rx-fifo-size = <1000>;
-		tx-fifo-size = <800>;
-		phy-mode = "rmii";
-		phy-map = <00000001>;
-		zmii-device = <&ZMII0>;
-		zmii-channel = <0>;
-	};
-
-      ii) McMAL node
-
-    Required properties:
-    - device_type        : "dma-controller"
-    - compatible         : compatible list, containing 2 entries, first is
-			   "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
-			   emac) and the second is either "ibm,mcmal" or
-			   "ibm,mcmal2".
-			   For Axon, "ibm,mcmal-axon","ibm,mcmal2"
-    - interrupts         : <interrupt mapping for the MAL interrupts sources:
-                           5 sources: tx_eob, rx_eob, serr, txde, rxde>.
-                           For Axon: This is _different_ from the current
-			   firmware.  We use the "delayed" interrupts for txeob
-			   and rxeob. Thus we end up with mapping those 5 MPIC
-			   interrupts, all level positive sensitive: 10, 11, 32,
-			   33, 34 (in decimal)
-    - dcr-reg            : < DCR registers range >
-    - dcr-parent         : if needed for dcr-reg
-    - num-tx-chans       : 1 cell, number of Tx channels
-    - num-rx-chans       : 1 cell, number of Rx channels
-
-      iii) ZMII node
-
-    Required properties:
-    - compatible         : compatible list, containing 2 entries, first is
-			   "ibm,zmii-CHIP" where CHIP is the host ASIC (like
-			   EMAC) and the second is "ibm,zmii".
-			   For Axon, there is no ZMII node.
-    - reg                : <registers mapping>
-
-      iv) RGMII node
-
-    Required properties:
-    - compatible         : compatible list, containing 2 entries, first is
-			   "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
-			   EMAC) and the second is "ibm,rgmii".
-                           For Axon, "ibm,rgmii-axon","ibm,rgmii"
-    - reg                : <registers mapping>
-    - revision           : as provided by the RGMII new version register if
-			   available.
-			   For Axon: 0x0000012a
-
-   d) Xilinx IP cores
-
-   The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
-   in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
-   of standard device types (network, serial, etc.) and miscellaneous
-   devices (gpio, LCD, spi, etc).  Also, since these devices are
-   implemented within the fpga fabric every instance of the device can be
-   synthesised with different options that change the behaviour.
-
-   Each IP-core has a set of parameters which the FPGA designer can use to
-   control how the core is synthesized.  Historically, the EDK tool would
-   extract the device parameters relevant to device drivers and copy them
-   into an 'xparameters.h' in the form of #define symbols.  This tells the
-   device drivers how the IP cores are configured, but it requres the kernel
-   to be recompiled every time the FPGA bitstream is resynthesized.
-
-   The new approach is to export the parameters into the device tree and
-   generate a new device tree each time the FPGA bitstream changes.  The
-   parameters which used to be exported as #defines will now become
-   properties of the device node.  In general, device nodes for IP-cores
-   will take the following form:
-
-	(name): (generic-name)@(base-address) {
-		compatible = "xlnx,(ip-core-name)-(HW_VER)"
-			     [, (list of compatible devices), ...];
-		reg = <(baseaddr) (size)>;
-		interrupt-parent = <&interrupt-controller-phandle>;
-		interrupts = < ... >;
-		xlnx,(parameter1) = "(string-value)";
-		xlnx,(parameter2) = <(int-value)>;
-	};
-
-	(generic-name):   an open firmware-style name that describes the
-			generic class of device.  Preferably, this is one word, such
-			as 'serial' or 'ethernet'.
-	(ip-core-name):	the name of the ip block (given after the BEGIN
-			directive in system.mhs).  Should be in lowercase
-			and all underscores '_' converted to dashes '-'.
-	(name):		is derived from the "PARAMETER INSTANCE" value.
-	(parameter#):	C_* parameters from system.mhs.  The C_ prefix is
-			dropped from the parameter name, the name is converted
-			to lowercase and all underscore '_' characters are
-			converted to dashes '-'.
-	(baseaddr):	the baseaddr parameter value (often named C_BASEADDR).
-	(HW_VER):	from the HW_VER parameter.
-	(size):		the address range size (often C_HIGHADDR - C_BASEADDR + 1).
-
-   Typically, the compatible list will include the exact IP core version
-   followed by an older IP core version which implements the same
-   interface or any other device with the same interface.
-
-   'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
-
-   For example, the following block from system.mhs:
-
-	BEGIN opb_uartlite
-		PARAMETER INSTANCE = opb_uartlite_0
-		PARAMETER HW_VER = 1.00.b
-		PARAMETER C_BAUDRATE = 115200
-		PARAMETER C_DATA_BITS = 8
-		PARAMETER C_ODD_PARITY = 0
-		PARAMETER C_USE_PARITY = 0
-		PARAMETER C_CLK_FREQ = 50000000
-		PARAMETER C_BASEADDR = 0xEC100000
-		PARAMETER C_HIGHADDR = 0xEC10FFFF
-		BUS_INTERFACE SOPB = opb_7
-		PORT OPB_Clk = CLK_50MHz
-		PORT Interrupt = opb_uartlite_0_Interrupt
-		PORT RX = opb_uartlite_0_RX
-		PORT TX = opb_uartlite_0_TX
-		PORT OPB_Rst = sys_bus_reset_0
-	END
-
-   becomes the following device tree node:
-
-	opb_uartlite_0: serial@ec100000 {
-		device_type = "serial";
-		compatible = "xlnx,opb-uartlite-1.00.b";
-		reg = <ec100000 10000>;
-		interrupt-parent = <&opb_intc_0>;
-		interrupts = <1 0>; // got this from the opb_intc parameters
-		current-speed = <d#115200>;	// standard serial device prop
-		clock-frequency = <d#50000000>;	// standard serial device prop
-		xlnx,data-bits = <8>;
-		xlnx,odd-parity = <0>;
-		xlnx,use-parity = <0>;
-	};
-
-   Some IP cores actually implement 2 or more logical devices.  In
-   this case, the device should still describe the whole IP core with
-   a single node and add a child node for each logical device.  The
-   ranges property can be used to translate from parent IP-core to the
-   registers of each device.  In addition, the parent node should be
-   compatible with the bus type 'xlnx,compound', and should contain
-   #address-cells and #size-cells, as with any other bus.  (Note: this
-   makes the assumption that both logical devices have the same bus
-   binding.  If this is not true, then separate nodes should be used
-   for each logical device).  The 'cell-index' property can be used to
-   enumerate logical devices within an IP core.  For example, the
-   following is the system.mhs entry for the dual ps2 controller found
-   on the ml403 reference design.
-
-	BEGIN opb_ps2_dual_ref
-		PARAMETER INSTANCE = opb_ps2_dual_ref_0
-		PARAMETER HW_VER = 1.00.a
-		PARAMETER C_BASEADDR = 0xA9000000
-		PARAMETER C_HIGHADDR = 0xA9001FFF
-		BUS_INTERFACE SOPB = opb_v20_0
-		PORT Sys_Intr1 = ps2_1_intr
-		PORT Sys_Intr2 = ps2_2_intr
-		PORT Clkin1 = ps2_clk_rx_1
-		PORT Clkin2 = ps2_clk_rx_2
-		PORT Clkpd1 = ps2_clk_tx_1
-		PORT Clkpd2 = ps2_clk_tx_2
-		PORT Rx1 = ps2_d_rx_1
-		PORT Rx2 = ps2_d_rx_2
-		PORT Txpd1 = ps2_d_tx_1
-		PORT Txpd2 = ps2_d_tx_2
-	END
-
-   It would result in the following device tree nodes:
-
-	opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,compound";
-		ranges = <0 a9000000 2000>;
-		// If this device had extra parameters, then they would
-		// go here.
-		ps2@0 {
-			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
-			reg = <0 40>;
-			interrupt-parent = <&opb_intc_0>;
-			interrupts = <3 0>;
-			cell-index = <0>;
-		};
-		ps2@1000 {
-			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
-			reg = <1000 40>;
-			interrupt-parent = <&opb_intc_0>;
-			interrupts = <3 0>;
-			cell-index = <0>;
-		};
-	};
-
-   Also, the system.mhs file defines bus attachments from the processor
-   to the devices.  The device tree structure should reflect the bus
-   attachments.  Again an example; this system.mhs fragment:
-
-	BEGIN ppc405_virtex4
-		PARAMETER INSTANCE = ppc405_0
-		PARAMETER HW_VER = 1.01.a
-		BUS_INTERFACE DPLB = plb_v34_0
-		BUS_INTERFACE IPLB = plb_v34_0
-	END
-
-	BEGIN opb_intc
-		PARAMETER INSTANCE = opb_intc_0
-		PARAMETER HW_VER = 1.00.c
-		PARAMETER C_BASEADDR = 0xD1000FC0
-		PARAMETER C_HIGHADDR = 0xD1000FDF
-		BUS_INTERFACE SOPB = opb_v20_0
-	END
-
-	BEGIN opb_uart16550
-		PARAMETER INSTANCE = opb_uart16550_0
-		PARAMETER HW_VER = 1.00.d
-		PARAMETER C_BASEADDR = 0xa0000000
-		PARAMETER C_HIGHADDR = 0xa0001FFF
-		BUS_INTERFACE SOPB = opb_v20_0
-	END
-
-	BEGIN plb_v34
-		PARAMETER INSTANCE = plb_v34_0
-		PARAMETER HW_VER = 1.02.a
-	END
-
-	BEGIN plb_bram_if_cntlr
-		PARAMETER INSTANCE = plb_bram_if_cntlr_0
-		PARAMETER HW_VER = 1.00.b
-		PARAMETER C_BASEADDR = 0xFFFF0000
-		PARAMETER C_HIGHADDR = 0xFFFFFFFF
-		BUS_INTERFACE SPLB = plb_v34_0
-	END
-
-	BEGIN plb2opb_bridge
-		PARAMETER INSTANCE = plb2opb_bridge_0
-		PARAMETER HW_VER = 1.01.a
-		PARAMETER C_RNG0_BASEADDR = 0x20000000
-		PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
-		PARAMETER C_RNG1_BASEADDR = 0x60000000
-		PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
-		PARAMETER C_RNG2_BASEADDR = 0x80000000
-		PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
-		PARAMETER C_RNG3_BASEADDR = 0xC0000000
-		PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
-		BUS_INTERFACE SPLB = plb_v34_0
-		BUS_INTERFACE MOPB = opb_v20_0
-	END
-
-   Gives this device tree (some properties removed for clarity):
-
-	plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v34-1.02.a";
-		device_type = "ibm,plb";
-		ranges; // 1:1 translation
-
-		plb_bram_if_cntrl_0: bram@ffff0000 {
-			reg = <ffff0000 10000>;
-		}
-
-		opb@20000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <20000000 20000000 20000000
-				  60000000 60000000 20000000
-				  80000000 80000000 40000000
-				  c0000000 c0000000 20000000>;
-
-			opb_uart16550_0: serial@a0000000 {
-				reg = <a00000000 2000>;
-			};
-
-			opb_intc_0: interrupt-controller@d1000fc0 {
-				reg = <d1000fc0 20>;
-			};
-		};
-	};
-
-   That covers the general approach to binding xilinx IP cores into the
-   device tree.  The following are bindings for specific devices:
-
-      i) Xilinx ML300 Framebuffer
-
-      Simple framebuffer device from the ML300 reference design (also on the
-      ML403 reference design as well as others).
-
-      Optional properties:
-       - resolution = <xres yres> : pixel resolution of framebuffer.  Some
-                                    implementations use a different resolution.
-                                    Default is <d#640 d#480>
-       - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
-                                           Default is <d#1024 d#480>.
-       - rotate-display (empty) : rotate display 180 degrees.
-
-      ii) Xilinx SystemACE
-
-      The Xilinx SystemACE device is used to program FPGAs from an FPGA
-      bitstream stored on a CF card.  It can also be used as a generic CF
-      interface device.
-
-      Optional properties:
-       - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
-
-      iii) Xilinx EMAC and Xilinx TEMAC
-
-      Xilinx Ethernet devices.  In addition to general xilinx properties
-      listed above, nodes for these devices should include a phy-handle
-      property, and may include other common network device properties
-      like local-mac-address.
-
-      iv) Xilinx Uartlite
-
-      Xilinx uartlite devices are simple fixed speed serial ports.
-
-      Required properties:
-       - current-speed : Baud rate of uartlite
-
-      v) Xilinx hwicap
-
-		Xilinx hwicap devices provide access to the configuration logic
-		of the FPGA through the Internal Configuration Access Port
-		(ICAP).  The ICAP enables partial reconfiguration of the FPGA,
-		readback of the configuration information, and some control over
-		'warm boots' of the FPGA fabric.
-
-		Required properties:
-		- xlnx,family : The family of the FPGA, necessary since the
-                      capabilities of the underlying ICAP hardware
-                      differ between different families.  May be
-                      'virtex2p', 'virtex4', or 'virtex5'.
-
-      vi) Xilinx Uart 16550
-
-      Xilinx UART 16550 devices are very similar to the NS16550 but with
-      different register spacing and an offset from the base address.
-
-      Required properties:
-       - clock-frequency : Frequency of the clock input
-       - reg-offset : A value of 3 is required
-       - reg-shift : A value of 2 is required
-
-    e) USB EHCI controllers
-
-    Required properties:
-      - compatible : should be "usb-ehci".
-      - reg : should contain at least address and length of the standard EHCI
-        register set for the device. Optional platform-dependent registers
-        (debug-port or other) can be also specified here, but only after
-        definition of standard EHCI registers.
-      - interrupts : one EHCI interrupt should be described here.
-    If device registers are implemented in big endian mode, the device
-    node should have "big-endian-regs" property.
-    If controller implementation operates with big endian descriptors,
-    "big-endian-desc" property should be specified.
-    If both big endian registers and descriptors are used by the controller
-    implementation, "big-endian" property can be specified instead of having
-    both "big-endian-regs" and "big-endian-desc".
-
-     Example (Sequoia 440EPx):
-	    ehci@e0000300 {
-		   compatible = "ibm,usb-ehci-440epx", "usb-ehci";
-		   interrupt-parent = <&UIC0>;
-		   interrupts = <1a 4>;
-		   reg = <0 e0000300 90 0 e0000390 70>;
-		   big-endian;
-	   };
-
-   f) MDIO on GPIOs
-
-   Currently defined compatibles:
-   - virtual,gpio-mdio
-
-   MDC and MDIO lines connected to GPIO controllers are listed in the
-   gpios property as described in section VIII.1 in the following order:
-
-   MDC, MDIO.
-
-   Example:
-
-	mdio {
-		compatible = "virtual,mdio-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpios = <&qe_pio_a 11
-			 &qe_pio_c 6>;
-	};
-
-    g) SPI (Serial Peripheral Interface) busses
-
-    SPI busses can be described with a node for the SPI master device
-    and a set of child nodes for each SPI slave on the bus.  For this
-    discussion, it is assumed that the system's SPI controller is in
-    SPI master mode.  This binding does not describe SPI controllers
-    in slave mode.
-
-    The SPI master node requires the following properties:
-    - #address-cells  - number of cells required to define a chip select
-			address on the SPI bus.
-    - #size-cells     - should be zero.
-    - compatible      - name of SPI bus controller following generic names
-			recommended practice.
-    No other properties are required in the SPI bus node.  It is assumed
-    that a driver for an SPI bus device will understand that it is an SPI bus.
-    However, the binding does not attempt to define the specific method for
-    assigning chip select numbers.  Since SPI chip select configuration is
-    flexible and non-standardized, it is left out of this binding with the
-    assumption that board specific platform code will be used to manage
-    chip selects.  Individual drivers can define additional properties to
-    support describing the chip select layout.
-
-    SPI slave nodes must be children of the SPI master node and can
-    contain the following properties.
-    - reg             - (required) chip select address of device.
-    - compatible      - (required) name of SPI device following generic names
-			recommended practice
-    - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
-    - spi-cpol        - (optional) Empty property indicating device requires
-			inverse clock polarity (CPOL) mode
-    - spi-cpha        - (optional) Empty property indicating device requires
-			shifted clock phase (CPHA) mode
-    - spi-cs-high     - (optional) Empty property indicating device requires
-			chip select active high
-
-    SPI example for an MPC5200 SPI bus:
-		spi@f00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-			interrupt-parent = <&mpc5200_pic>;
-
-			ethernet-switch@0 {
-				compatible = "micrel,ks8995m";
-				spi-max-frequency = <1000000>;
-				reg = <0>;
-			};
-
-			codec@1 {
-				compatible = "ti,tlv320aic26";
-				spi-max-frequency = <100000>;
-				reg = <1>;
-			};
-		};
-
-VII - Marvell Discovery mv64[345]6x System Controller chips
-===========================================================
-
-The Marvell mv64[345]60 series of system controller chips contain
-many of the peripherals needed to implement a complete computer
-system.  In this section, we define device tree nodes to describe
-the system controller chip itself and each of the peripherals
-which it contains.  Compatible string values for each node are
-prefixed with the string "marvell,", for Marvell Technology Group Ltd.
-
-1) The /system-controller node
-
-  This node is used to represent the system-controller and must be
-  present when the system uses a system controller chip. The top-level
-  system-controller node contains information that is global to all
-  devices within the system controller chip. The node name begins
-  with "system-controller" followed by the unit address, which is
-  the base address of the memory-mapped register set for the system
-  controller chip.
-
-  Required properties:
-
-    - ranges : Describes the translation of system controller addresses
-      for memory mapped registers.
-    - clock-frequency: Contains the main clock frequency for the system
-      controller chip.
-    - reg : This property defines the address and size of the
-      memory-mapped registers contained within the system controller
-      chip.  The address specified in the "reg" property should match
-      the unit address of the system-controller node.
-    - #address-cells : Address representation for system controller
-      devices.  This field represents the number of cells needed to
-      represent the address of the memory-mapped registers of devices
-      within the system controller chip.
-    - #size-cells : Size representation for for the memory-mapped
-      registers within the system controller chip.
-    - #interrupt-cells : Defines the width of cells used to represent
-      interrupts.
-
-  Optional properties:
-
-    - model : The specific model of the system controller chip.  Such
-      as, "mv64360", "mv64460", or "mv64560".
-    - compatible : A string identifying the compatibility identifiers
-      of the system controller chip.
-
-  The system-controller node contains child nodes for each system
-  controller device that the platform uses.  Nodes should not be created
-  for devices which exist on the system controller chip but are not used
-
-  Example Marvell Discovery mv64360 system-controller node:
-
-    system-controller@f1000000 { /* Marvell Discovery mv64360 */
-	    #address-cells = <1>;
-	    #size-cells = <1>;
-	    model = "mv64360";                      /* Default */
-	    compatible = "marvell,mv64360";
-	    clock-frequency = <133333333>;
-	    reg = <0xf1000000 0x10000>;
-	    virtual-reg = <0xf1000000>;
-	    ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
-		    0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
-		    0xa0000000 0xa0000000 0x4000000 /* User FLASH */
-		    0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
-		    0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
-	    [ child node definitions... ]
-    }
-
-2) Child nodes of /system-controller
-
-   a) Marvell Discovery MDIO bus
-
-   The MDIO is a bus to which the PHY devices are connected.  For each
-   device that exists on this bus, a child node should be created.  See
-   the definition of the PHY node below for an example of how to define
-   a PHY.
-
-   Required properties:
-     - #address-cells : Should be <1>
-     - #size-cells : Should be <0>
-     - device_type : Should be "mdio"
-     - compatible : Should be "marvell,mv64360-mdio"
-
-   Example:
-
-     mdio {
-	     #address-cells = <1>;
-	     #size-cells = <0>;
-	     device_type = "mdio";
-	     compatible = "marvell,mv64360-mdio";
-
-	     ethernet-phy@0 {
-		     ......
-	     };
-     };
-
-
-   b) Marvell Discovery ethernet controller
-
-   The Discover ethernet controller is described with two levels
-   of nodes.  The first level describes an ethernet silicon block
-   and the second level describes up to 3 ethernet nodes within
-   that block.  The reason for the multiple levels is that the
-   registers for the node are interleaved within a single set
-   of registers.  The "ethernet-block" level describes the
-   shared register set, and the "ethernet" nodes describe ethernet
-   port-specific properties.
-
-   Ethernet block node
-
-   Required properties:
-     - #address-cells : <1>
-     - #size-cells : <0>
-     - compatible : "marvell,mv64360-eth-block"
-     - reg : Offset and length of the register set for this block
-
-   Example Discovery Ethernet block node:
-     ethernet-block@2000 {
-	     #address-cells = <1>;
-	     #size-cells = <0>;
-	     compatible = "marvell,mv64360-eth-block";
-	     reg = <0x2000 0x2000>;
-	     ethernet@0 {
-		     .......
-	     };
-     };
-
-   Ethernet port node
-
-   Required properties:
-     - device_type : Should be "network".
-     - compatible : Should be "marvell,mv64360-eth".
-     - reg : Should be <0>, <1>, or <2>, according to which registers
-       within the silicon block the device uses.
-     - interrupts : <a> where a is the interrupt number for the port.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-     - phy : the phandle for the PHY connected to this ethernet
-       controller.
-     - local-mac-address : 6 bytes, MAC address
-
-   Example Discovery Ethernet port node:
-     ethernet@0 {
-	     device_type = "network";
-	     compatible = "marvell,mv64360-eth";
-	     reg = <0>;
-	     interrupts = <32>;
-	     interrupt-parent = <&PIC>;
-	     phy = <&PHY0>;
-	     local-mac-address = [ 00 00 00 00 00 00 ];
-     };
-
-
-
-   c) Marvell Discovery PHY nodes
-
-   Required properties:
-     - device_type : Should be "ethernet-phy"
-     - interrupts : <a> where a is the interrupt number for this phy.
-     - interrupt-parent : the phandle for the interrupt controller that
-       services interrupts for this device.
-     - reg : The ID number for the phy, usually a small integer
-
-   Example Discovery PHY node:
-     ethernet-phy@1 {
-	     device_type = "ethernet-phy";
-	     compatible = "broadcom,bcm5421";
-	     interrupts = <76>;      /* GPP 12 */
-	     interrupt-parent = <&PIC>;
-	     reg = <1>;
-     };
-
-
-   d) Marvell Discovery SDMA nodes
-
-   Represent DMA hardware associated with the MPSC (multiprotocol
-   serial controllers).
-
-   Required properties:
-     - compatible : "marvell,mv64360-sdma"
-     - reg : Offset and length of the register set for this device
-     - interrupts : <a> where a is the interrupt number for the DMA
-       device.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery SDMA node:
-     sdma@4000 {
-	     compatible = "marvell,mv64360-sdma";
-	     reg = <0x4000 0xc18>;
-	     virtual-reg = <0xf1004000>;
-	     interrupts = <36>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   e) Marvell Discovery BRG nodes
-
-   Represent baud rate generator hardware associated with the MPSC
-   (multiprotocol serial controllers).
-
-   Required properties:
-     - compatible : "marvell,mv64360-brg"
-     - reg : Offset and length of the register set for this device
-     - clock-src : A value from 0 to 15 which selects the clock
-       source for the baud rate generator.  This value corresponds
-       to the CLKS value in the BRGx configuration register.  See
-       the mv64x60 User's Manual.
-     - clock-frequence : The frequency (in Hz) of the baud rate
-       generator's input clock.
-     - current-speed : The current speed setting (presumably by
-       firmware) of the baud rate generator.
-
-   Example Discovery BRG node:
-     brg@b200 {
-	     compatible = "marvell,mv64360-brg";
-	     reg = <0xb200 0x8>;
-	     clock-src = <8>;
-	     clock-frequency = <133333333>;
-	     current-speed = <9600>;
-     };
-
-
-   f) Marvell Discovery CUNIT nodes
-
-   Represent the Serial Communications Unit device hardware.
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery CUNIT node:
-     cunit@f200 {
-	     reg = <0xf200 0x200>;
-     };
-
-
-   g) Marvell Discovery MPSCROUTING nodes
-
-   Represent the Discovery's MPSC routing hardware
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery CUNIT node:
-     mpscrouting@b500 {
-	     reg = <0xb400 0xc>;
-     };
-
-
-   h) Marvell Discovery MPSCINTR nodes
-
-   Represent the Discovery's MPSC DMA interrupt hardware registers
-   (SDMA cause and mask registers).
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery MPSCINTR node:
-     mpsintr@b800 {
-	     reg = <0xb800 0x100>;
-     };
-
-
-   i) Marvell Discovery MPSC nodes
-
-   Represent the Discovery's MPSC (Multiprotocol Serial Controller)
-   serial port.
-
-   Required properties:
-     - device_type : "serial"
-     - compatible : "marvell,mv64360-mpsc"
-     - reg : Offset and length of the register set for this device
-     - sdma : the phandle for the SDMA node used by this port
-     - brg : the phandle for the BRG node used by this port
-     - cunit : the phandle for the CUNIT node used by this port
-     - mpscrouting : the phandle for the MPSCROUTING node used by this port
-     - mpscintr : the phandle for the MPSCINTR node used by this port
-     - cell-index : the hardware index of this cell in the MPSC core
-     - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
-       register
-     - interrupts : <a> where a is the interrupt number for the MPSC.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery MPSCINTR node:
-     mpsc@8000 {
-	     device_type = "serial";
-	     compatible = "marvell,mv64360-mpsc";
-	     reg = <0x8000 0x38>;
-	     virtual-reg = <0xf1008000>;
-	     sdma = <&SDMA0>;
-	     brg = <&BRG0>;
-	     cunit = <&CUNIT>;
-	     mpscrouting = <&MPSCROUTING>;
-	     mpscintr = <&MPSCINTR>;
-	     cell-index = <0>;
-	     max_idle = <40>;
-	     interrupts = <40>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   j) Marvell Discovery Watch Dog Timer nodes
-
-   Represent the Discovery's watchdog timer hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-wdt"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery Watch Dog Timer node:
-     wdt@b410 {
-	     compatible = "marvell,mv64360-wdt";
-	     reg = <0xb410 0x8>;
-     };
-
-
-   k) Marvell Discovery I2C nodes
-
-   Represent the Discovery's I2C hardware
-
-   Required properties:
-     - device_type : "i2c"
-     - compatible : "marvell,mv64360-i2c"
-     - reg : Offset and length of the register set for this device
-     - interrupts : <a> where a is the interrupt number for the I2C.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery I2C node:
-	     compatible = "marvell,mv64360-i2c";
-	     reg = <0xc000 0x20>;
-	     virtual-reg = <0xf100c000>;
-	     interrupts = <37>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
-
-   Represent the Discovery's PIC hardware
-
-   Required properties:
-     - #interrupt-cells : <1>
-     - #address-cells : <0>
-     - compatible : "marvell,mv64360-pic"
-     - reg : Offset and length of the register set for this device
-     - interrupt-controller
-
-   Example Discovery PIC node:
-     pic {
-	     #interrupt-cells = <1>;
-	     #address-cells = <0>;
-	     compatible = "marvell,mv64360-pic";
-	     reg = <0x0 0x88>;
-	     interrupt-controller;
-     };
-
-
-   m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
-
-   Represent the Discovery's MPP hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-mpp"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery MPP node:
-     mpp@f000 {
-	     compatible = "marvell,mv64360-mpp";
-	     reg = <0xf000 0x10>;
-     };
-
-
-   n) Marvell Discovery GPP (General Purpose Pins) nodes
-
-   Represent the Discovery's GPP hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-gpp"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery GPP node:
-     gpp@f000 {
-	     compatible = "marvell,mv64360-gpp";
-	     reg = <0xf100 0x20>;
-     };
-
-
-   o) Marvell Discovery PCI host bridge node
-
-   Represents the Discovery's PCI host bridge device.  The properties
-   for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
-   1275-1994.  A typical value for the compatible property is
-   "marvell,mv64360-pci".
-
-   Example Discovery PCI host bridge node
-     pci@80000000 {
-	     #address-cells = <3>;
-	     #size-cells = <2>;
-	     #interrupt-cells = <1>;
-	     device_type = "pci";
-	     compatible = "marvell,mv64360-pci";
-	     reg = <0xcf8 0x8>;
-	     ranges = <0x01000000 0x0        0x0
-			     0x88000000 0x0 0x01000000
-		       0x02000000 0x0 0x80000000
-			     0x80000000 0x0 0x08000000>;
-	     bus-range = <0 255>;
-	     clock-frequency = <66000000>;
-	     interrupt-parent = <&PIC>;
-	     interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-	     interrupt-map = <
-		     /* IDSEL 0x0a */
-		     0x5000 0 0 1 &PIC 80
-		     0x5000 0 0 2 &PIC 81
-		     0x5000 0 0 3 &PIC 91
-		     0x5000 0 0 4 &PIC 93
-
-		     /* IDSEL 0x0b */
-		     0x5800 0 0 1 &PIC 91
-		     0x5800 0 0 2 &PIC 93
-		     0x5800 0 0 3 &PIC 80
-		     0x5800 0 0 4 &PIC 81
-
-		     /* IDSEL 0x0c */
-		     0x6000 0 0 1 &PIC 91
-		     0x6000 0 0 2 &PIC 93
-		     0x6000 0 0 3 &PIC 80
-		     0x6000 0 0 4 &PIC 81
-
-		     /* IDSEL 0x0d */
-		     0x6800 0 0 1 &PIC 93
-		     0x6800 0 0 2 &PIC 80
-		     0x6800 0 0 3 &PIC 81
-		     0x6800 0 0 4 &PIC 91
-	     >;
-     };
-
-
-   p) Marvell Discovery CPU Error nodes
-
-   Represent the Discovery's CPU error handler device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-cpu-error"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery CPU Error node:
-     cpu-error@0070 {
-	     compatible = "marvell,mv64360-cpu-error";
-	     reg = <0x70 0x10 0x128 0x28>;
-	     interrupts = <3>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   q) Marvell Discovery SRAM Controller nodes
-
-   Represent the Discovery's SRAM controller device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-sram-ctrl"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery SRAM Controller node:
-     sram-ctrl@0380 {
-	     compatible = "marvell,mv64360-sram-ctrl";
-	     reg = <0x380 0x80>;
-	     interrupts = <13>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   r) Marvell Discovery PCI Error Handler nodes
-
-   Represent the Discovery's PCI error handler device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-pci-error"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery PCI Error Handler node:
-     pci-error@1d40 {
-	     compatible = "marvell,mv64360-pci-error";
-	     reg = <0x1d40 0x40 0xc28 0x4>;
-	     interrupts = <12>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   s) Marvell Discovery Memory Controller nodes
-
-   Represent the Discovery's memory controller device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-mem-ctrl"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery Memory Controller node:
-     mem-ctrl@1400 {
-	     compatible = "marvell,mv64360-mem-ctrl";
-	     reg = <0x1400 0x60>;
-	     interrupts = <17>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-VIII - Specifying interrupt information for devices
+VII - Specifying interrupt information for devices
 ===================================================
 
 The device tree represents the busses and devices of a hardware
@@ -2439,56 +1324,7 @@ encodings listed below:
 	2 =  high to low edge sensitive type enabled
 	3 =  low to high edge sensitive type enabled
 
-IX - Specifying GPIO information for devices
-============================================
-
-1) gpios property
------------------
-
-Nodes that makes use of GPIOs should define them using `gpios' property,
-format of which is: <&gpio-controller1-phandle gpio1-specifier
-		     &gpio-controller2-phandle gpio2-specifier
-		     0 /* holes are permitted, means no GPIO 3 */
-		     &gpio-controller4-phandle gpio4-specifier
-		     ...>;
-
-Note that gpio-specifier length is controller dependent.
-
-gpio-specifier may encode: bank, pin position inside the bank,
-whether pin is open-drain and whether pin is logically inverted.
-
-Example of the node using GPIOs:
-
-	node {
-		gpios = <&qe_pio_e 18 0>;
-	};
-
-In this example gpio-specifier is "18 0" and encodes GPIO pin number,
-and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
-
-2) gpio-controller nodes
-------------------------
-
-Every GPIO controller node must have #gpio-cells property defined,
-this information will be used to translate gpio-specifiers.
-
-Example of two SOC GPIO banks defined as gpio-controller nodes:
-
-	qe_pio_a: gpio-controller@1400 {
-		#gpio-cells = <2>;
-		compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
-		reg = <0x1400 0x18>;
-		gpio-controller;
-	};
-
-	qe_pio_e: gpio-controller@1460 {
-		#gpio-cells = <2>;
-		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
-		reg = <0x1460 0x18>;
-		gpio-controller;
-	};
-
-X - Specifying Device Power Management Information (sleep property)
+VIII - Specifying Device Power Management Information (sleep property)
 ===================================================================
 
 Devices on SOCs often have mechanisms for placing devices into low-power
diff --git a/Documentation/powerpc/dts-bindings/4xx/emac.txt b/Documentation/powerpc/dts-bindings/4xx/emac.txt
new file mode 100644
index 00000000000..2161334a7ca
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/4xx/emac.txt
@@ -0,0 +1,148 @@
+    4xx/Axon EMAC ethernet nodes
+
+    The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
+    the Axon bridge.  To operate this needs to interact with a ths
+    special McMAL DMA controller, and sometimes an RGMII or ZMII
+    interface.  In addition to the nodes and properties described
+    below, the node for the OPB bus on which the EMAC sits must have a
+    correct clock-frequency property.
+
+      i) The EMAC node itself
+
+    Required properties:
+    - device_type       : "network"
+
+    - compatible        : compatible list, contains 2 entries, first is
+			  "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
+			  405gp, Axon) and second is either "ibm,emac" or
+			  "ibm,emac4".  For Axon, thus, we have: "ibm,emac-axon",
+			  "ibm,emac4"
+    - interrupts        : <interrupt mapping for EMAC IRQ and WOL IRQ>
+    - interrupt-parent  : optional, if needed for interrupt mapping
+    - reg               : <registers mapping>
+    - local-mac-address : 6 bytes, MAC address
+    - mal-device        : phandle of the associated McMAL node
+    - mal-tx-channel    : 1 cell, index of the tx channel on McMAL associated
+			  with this EMAC
+    - mal-rx-channel    : 1 cell, index of the rx channel on McMAL associated
+			  with this EMAC
+    - cell-index        : 1 cell, hardware index of the EMAC cell on a given
+			  ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
+			  each Axon chip)
+    - max-frame-size    : 1 cell, maximum frame size supported in bytes
+    - rx-fifo-size      : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
+			  operations.
+			  For Axon, 2048
+    - tx-fifo-size      : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
+			  operations.
+			  For Axon, 2048.
+    - fifo-entry-size   : 1 cell, size of a fifo entry (used to calculate
+			  thresholds).
+			  For Axon, 0x00000010
+    - mal-burst-size    : 1 cell, MAL burst size (used to calculate thresholds)
+			  in bytes.
+			  For Axon, 0x00000100 (I think ...)
+    - phy-mode          : string, mode of operations of the PHY interface.
+			  Supported values are: "mii", "rmii", "smii", "rgmii",
+			  "tbi", "gmii", rtbi", "sgmii".
+			  For Axon on CAB, it is "rgmii"
+    - mdio-device       : 1 cell, required iff using shared MDIO registers
+			  (440EP).  phandle of the EMAC to use to drive the
+			  MDIO lines for the PHY used by this EMAC.
+    - zmii-device       : 1 cell, required iff connected to a ZMII.  phandle of
+			  the ZMII device node
+    - zmii-channel      : 1 cell, required iff connected to a ZMII.  Which ZMII
+			  channel or 0xffffffff if ZMII is only used for MDIO.
+    - rgmii-device      : 1 cell, required iff connected to an RGMII. phandle
+			  of the RGMII device node.
+			  For Axon: phandle of plb5/plb4/opb/rgmii
+    - rgmii-channel     : 1 cell, required iff connected to an RGMII.  Which
+			  RGMII channel is used by this EMAC.
+			  Fox Axon: present, whatever value is appropriate for each
+			  EMAC, that is the content of the current (bogus) "phy-port"
+			  property.
+
+    Optional properties:
+    - phy-address       : 1 cell, optional, MDIO address of the PHY. If absent,
+			  a search is performed.
+    - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
+			  for, used if phy-address is absent. bit 0x00000001 is
+			  MDIO address 0.
+			  For Axon it can be absent, though my current driver
+			  doesn't handle phy-address yet so for now, keep
+			  0x00ffffff in it.
+    - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
+			  operations (if absent the value is the same as
+			  rx-fifo-size).  For Axon, either absent or 2048.
+    - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
+			  operations (if absent the value is the same as
+			  tx-fifo-size). For Axon, either absent or 2048.
+    - tah-device        : 1 cell, optional. If connected to a TAH engine for
+			  offload, phandle of the TAH device node.
+    - tah-channel       : 1 cell, optional. If appropriate, channel used on the
+			  TAH engine.
+
+    Example:
+
+	EMAC0: ethernet@40000800 {
+		device_type = "network";
+		compatible = "ibm,emac-440gp", "ibm,emac";
+		interrupt-parent = <&UIC1>;
+		interrupts = <1c 4 1d 4>;
+		reg = <40000800 70>;
+		local-mac-address = [00 04 AC E3 1B 1E];
+		mal-device = <&MAL0>;
+		mal-tx-channel = <0 1>;
+		mal-rx-channel = <0>;
+		cell-index = <0>;
+		max-frame-size = <5dc>;
+		rx-fifo-size = <1000>;
+		tx-fifo-size = <800>;
+		phy-mode = "rmii";
+		phy-map = <00000001>;
+		zmii-device = <&ZMII0>;
+		zmii-channel = <0>;
+	};
+
+      ii) McMAL node
+
+    Required properties:
+    - device_type        : "dma-controller"
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
+			   emac) and the second is either "ibm,mcmal" or
+			   "ibm,mcmal2".
+			   For Axon, "ibm,mcmal-axon","ibm,mcmal2"
+    - interrupts         : <interrupt mapping for the MAL interrupts sources:
+                           5 sources: tx_eob, rx_eob, serr, txde, rxde>.
+                           For Axon: This is _different_ from the current
+			   firmware.  We use the "delayed" interrupts for txeob
+			   and rxeob. Thus we end up with mapping those 5 MPIC
+			   interrupts, all level positive sensitive: 10, 11, 32,
+			   33, 34 (in decimal)
+    - dcr-reg            : < DCR registers range >
+    - dcr-parent         : if needed for dcr-reg
+    - num-tx-chans       : 1 cell, number of Tx channels
+    - num-rx-chans       : 1 cell, number of Rx channels
+
+      iii) ZMII node
+
+    Required properties:
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,zmii-CHIP" where CHIP is the host ASIC (like
+			   EMAC) and the second is "ibm,zmii".
+			   For Axon, there is no ZMII node.
+    - reg                : <registers mapping>
+
+      iv) RGMII node
+
+    Required properties:
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
+			   EMAC) and the second is "ibm,rgmii".
+                           For Axon, "ibm,rgmii-axon","ibm,rgmii"
+    - reg                : <registers mapping>
+    - revision           : as provided by the RGMII new version register if
+			   available.
+			   For Axon: 0x0000012a
+
diff --git a/Documentation/powerpc/dts-bindings/gpio/gpio.txt b/Documentation/powerpc/dts-bindings/gpio/gpio.txt
new file mode 100644
index 00000000000..edaa84d288a
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/gpio.txt
@@ -0,0 +1,50 @@
+Specifying GPIO information for devices
+============================================
+
+1) gpios property
+-----------------
+
+Nodes that makes use of GPIOs should define them using `gpios' property,
+format of which is: <&gpio-controller1-phandle gpio1-specifier
+		     &gpio-controller2-phandle gpio2-specifier
+		     0 /* holes are permitted, means no GPIO 3 */
+		     &gpio-controller4-phandle gpio4-specifier
+		     ...>;
+
+Note that gpio-specifier length is controller dependent.
+
+gpio-specifier may encode: bank, pin position inside the bank,
+whether pin is open-drain and whether pin is logically inverted.
+
+Example of the node using GPIOs:
+
+	node {
+		gpios = <&qe_pio_e 18 0>;
+	};
+
+In this example gpio-specifier is "18 0" and encodes GPIO pin number,
+and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
+
+2) gpio-controller nodes
+------------------------
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Example of two SOC GPIO banks defined as gpio-controller nodes:
+
+	qe_pio_a: gpio-controller@1400 {
+		#gpio-cells = <2>;
+		compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
+		reg = <0x1400 0x18>;
+		gpio-controller;
+	};
+
+	qe_pio_e: gpio-controller@1460 {
+		#gpio-cells = <2>;
+		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+		reg = <0x1460 0x18>;
+		gpio-controller;
+	};
+
+
diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt
index 4fe14deedc0..064db928c3c 100644
--- a/Documentation/powerpc/dts-bindings/gpio/led.txt
+++ b/Documentation/powerpc/dts-bindings/gpio/led.txt
@@ -16,10 +16,17 @@ LED sub-node properties:
   string defining the trigger assigned to the LED.  Current triggers are:
     "backlight" - LED will act as a back-light, controlled by the framebuffer
 		  system
-    "default-on" - LED will turn on
+    "default-on" - LED will turn on, but see "default-state" below
     "heartbeat" - LED "double" flashes at a load average based rate
     "ide-disk" - LED indicates disk activity
     "timer" - LED flashes at a fixed, configurable rate
+- default-state:  (optional) The initial state of the LED.  Valid
+  values are "on", "off", and "keep".  If the LED is already on or off
+  and the default-state property is set the to same value, then no
+  glitch should be produced where the LED momentarily turns off (or
+  on).  The "keep" setting will keep the LED at whatever its current
+  state is, without producing a glitch.  The default is off if this
+  property is not present.
 
 Examples:
 
@@ -30,14 +37,22 @@ leds {
 		gpios = <&mcu_pio 0 1>; /* Active low */
 		linux,default-trigger = "ide-disk";
 	};
+
+	fault {
+		gpios = <&mcu_pio 1 0>;
+		/* Keep LED on if BIOS detected hardware fault */
+		default-state = "keep";
+	};
 };
 
 run-control {
 	compatible = "gpio-leds";
 	red {
 		gpios = <&mpc8572 6 0>;
+		default-state = "off";
 	};
 	green {
 		gpios = <&mpc8572 7 0>;
+		default-state = "on";
 	};
 }
diff --git a/Documentation/powerpc/dts-bindings/gpio/mdio.txt b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
new file mode 100644
index 00000000000..bc954952901
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
@@ -0,0 +1,19 @@
+MDIO on GPIOs
+
+Currently defined compatibles:
+- virtual,gpio-mdio
+
+MDC and MDIO lines connected to GPIO controllers are listed in the
+gpios property as described in section VIII.1 in the following order:
+
+MDC, MDIO.
+
+Example:
+
+mdio {
+	compatible = "virtual,mdio-gpio";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpios = <&qe_pio_a 11
+		 &qe_pio_c 6>;
+};
diff --git a/Documentation/powerpc/dts-bindings/marvell.txt b/Documentation/powerpc/dts-bindings/marvell.txt
new file mode 100644
index 00000000000..3708a2fd474
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/marvell.txt
@@ -0,0 +1,521 @@
+Marvell Discovery mv64[345]6x System Controller chips
+===========================================================
+
+The Marvell mv64[345]60 series of system controller chips contain
+many of the peripherals needed to implement a complete computer
+system.  In this section, we define device tree nodes to describe
+the system controller chip itself and each of the peripherals
+which it contains.  Compatible string values for each node are
+prefixed with the string "marvell,", for Marvell Technology Group Ltd.
+
+1) The /system-controller node
+
+  This node is used to represent the system-controller and must be
+  present when the system uses a system controller chip. The top-level
+  system-controller node contains information that is global to all
+  devices within the system controller chip. The node name begins
+  with "system-controller" followed by the unit address, which is
+  the base address of the memory-mapped register set for the system
+  controller chip.
+
+  Required properties:
+
+    - ranges : Describes the translation of system controller addresses
+      for memory mapped registers.
+    - clock-frequency: Contains the main clock frequency for the system
+      controller chip.
+    - reg : This property defines the address and size of the
+      memory-mapped registers contained within the system controller
+      chip.  The address specified in the "reg" property should match
+      the unit address of the system-controller node.
+    - #address-cells : Address representation for system controller
+      devices.  This field represents the number of cells needed to
+      represent the address of the memory-mapped registers of devices
+      within the system controller chip.
+    - #size-cells : Size representation for for the memory-mapped
+      registers within the system controller chip.
+    - #interrupt-cells : Defines the width of cells used to represent
+      interrupts.
+
+  Optional properties:
+
+    - model : The specific model of the system controller chip.  Such
+      as, "mv64360", "mv64460", or "mv64560".
+    - compatible : A string identifying the compatibility identifiers
+      of the system controller chip.
+
+  The system-controller node contains child nodes for each system
+  controller device that the platform uses.  Nodes should not be created
+  for devices which exist on the system controller chip but are not used
+
+  Example Marvell Discovery mv64360 system-controller node:
+
+    system-controller@f1000000 { /* Marvell Discovery mv64360 */
+	    #address-cells = <1>;
+	    #size-cells = <1>;
+	    model = "mv64360";                      /* Default */
+	    compatible = "marvell,mv64360";
+	    clock-frequency = <133333333>;
+	    reg = <0xf1000000 0x10000>;
+	    virtual-reg = <0xf1000000>;
+	    ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+		    0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+		    0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+		    0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+		    0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
+
+	    [ child node definitions... ]
+    }
+
+2) Child nodes of /system-controller
+
+   a) Marvell Discovery MDIO bus
+
+   The MDIO is a bus to which the PHY devices are connected.  For each
+   device that exists on this bus, a child node should be created.  See
+   the definition of the PHY node below for an example of how to define
+   a PHY.
+
+   Required properties:
+     - #address-cells : Should be <1>
+     - #size-cells : Should be <0>
+     - device_type : Should be "mdio"
+     - compatible : Should be "marvell,mv64360-mdio"
+
+   Example:
+
+     mdio {
+	     #address-cells = <1>;
+	     #size-cells = <0>;
+	     device_type = "mdio";
+	     compatible = "marvell,mv64360-mdio";
+
+	     ethernet-phy@0 {
+		     ......
+	     };
+     };
+
+
+   b) Marvell Discovery ethernet controller
+
+   The Discover ethernet controller is described with two levels
+   of nodes.  The first level describes an ethernet silicon block
+   and the second level describes up to 3 ethernet nodes within
+   that block.  The reason for the multiple levels is that the
+   registers for the node are interleaved within a single set
+   of registers.  The "ethernet-block" level describes the
+   shared register set, and the "ethernet" nodes describe ethernet
+   port-specific properties.
+
+   Ethernet block node
+
+   Required properties:
+     - #address-cells : <1>
+     - #size-cells : <0>
+     - compatible : "marvell,mv64360-eth-block"
+     - reg : Offset and length of the register set for this block
+
+   Example Discovery Ethernet block node:
+     ethernet-block@2000 {
+	     #address-cells = <1>;
+	     #size-cells = <0>;
+	     compatible = "marvell,mv64360-eth-block";
+	     reg = <0x2000 0x2000>;
+	     ethernet@0 {
+		     .......
+	     };
+     };
+
+   Ethernet port node
+
+   Required properties:
+     - device_type : Should be "network".
+     - compatible : Should be "marvell,mv64360-eth".
+     - reg : Should be <0>, <1>, or <2>, according to which registers
+       within the silicon block the device uses.
+     - interrupts : <a> where a is the interrupt number for the port.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+     - phy : the phandle for the PHY connected to this ethernet
+       controller.
+     - local-mac-address : 6 bytes, MAC address
+
+   Example Discovery Ethernet port node:
+     ethernet@0 {
+	     device_type = "network";
+	     compatible = "marvell,mv64360-eth";
+	     reg = <0>;
+	     interrupts = <32>;
+	     interrupt-parent = <&PIC>;
+	     phy = <&PHY0>;
+	     local-mac-address = [ 00 00 00 00 00 00 ];
+     };
+
+
+
+   c) Marvell Discovery PHY nodes
+
+   Required properties:
+     - device_type : Should be "ethernet-phy"
+     - interrupts : <a> where a is the interrupt number for this phy.
+     - interrupt-parent : the phandle for the interrupt controller that
+       services interrupts for this device.
+     - reg : The ID number for the phy, usually a small integer
+
+   Example Discovery PHY node:
+     ethernet-phy@1 {
+	     device_type = "ethernet-phy";
+	     compatible = "broadcom,bcm5421";
+	     interrupts = <76>;      /* GPP 12 */
+	     interrupt-parent = <&PIC>;
+	     reg = <1>;
+     };
+
+
+   d) Marvell Discovery SDMA nodes
+
+   Represent DMA hardware associated with the MPSC (multiprotocol
+   serial controllers).
+
+   Required properties:
+     - compatible : "marvell,mv64360-sdma"
+     - reg : Offset and length of the register set for this device
+     - interrupts : <a> where a is the interrupt number for the DMA
+       device.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery SDMA node:
+     sdma@4000 {
+	     compatible = "marvell,mv64360-sdma";
+	     reg = <0x4000 0xc18>;
+	     virtual-reg = <0xf1004000>;
+	     interrupts = <36>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   e) Marvell Discovery BRG nodes
+
+   Represent baud rate generator hardware associated with the MPSC
+   (multiprotocol serial controllers).
+
+   Required properties:
+     - compatible : "marvell,mv64360-brg"
+     - reg : Offset and length of the register set for this device
+     - clock-src : A value from 0 to 15 which selects the clock
+       source for the baud rate generator.  This value corresponds
+       to the CLKS value in the BRGx configuration register.  See
+       the mv64x60 User's Manual.
+     - clock-frequence : The frequency (in Hz) of the baud rate
+       generator's input clock.
+     - current-speed : The current speed setting (presumably by
+       firmware) of the baud rate generator.
+
+   Example Discovery BRG node:
+     brg@b200 {
+	     compatible = "marvell,mv64360-brg";
+	     reg = <0xb200 0x8>;
+	     clock-src = <8>;
+	     clock-frequency = <133333333>;
+	     current-speed = <9600>;
+     };
+
+
+   f) Marvell Discovery CUNIT nodes
+
+   Represent the Serial Communications Unit device hardware.
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery CUNIT node:
+     cunit@f200 {
+	     reg = <0xf200 0x200>;
+     };
+
+
+   g) Marvell Discovery MPSCROUTING nodes
+
+   Represent the Discovery's MPSC routing hardware
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery CUNIT node:
+     mpscrouting@b500 {
+	     reg = <0xb400 0xc>;
+     };
+
+
+   h) Marvell Discovery MPSCINTR nodes
+
+   Represent the Discovery's MPSC DMA interrupt hardware registers
+   (SDMA cause and mask registers).
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery MPSCINTR node:
+     mpsintr@b800 {
+	     reg = <0xb800 0x100>;
+     };
+
+
+   i) Marvell Discovery MPSC nodes
+
+   Represent the Discovery's MPSC (Multiprotocol Serial Controller)
+   serial port.
+
+   Required properties:
+     - device_type : "serial"
+     - compatible : "marvell,mv64360-mpsc"
+     - reg : Offset and length of the register set for this device
+     - sdma : the phandle for the SDMA node used by this port
+     - brg : the phandle for the BRG node used by this port
+     - cunit : the phandle for the CUNIT node used by this port
+     - mpscrouting : the phandle for the MPSCROUTING node used by this port
+     - mpscintr : the phandle for the MPSCINTR node used by this port
+     - cell-index : the hardware index of this cell in the MPSC core
+     - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
+       register
+     - interrupts : <a> where a is the interrupt number for the MPSC.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery MPSCINTR node:
+     mpsc@8000 {
+	     device_type = "serial";
+	     compatible = "marvell,mv64360-mpsc";
+	     reg = <0x8000 0x38>;
+	     virtual-reg = <0xf1008000>;
+	     sdma = <&SDMA0>;
+	     brg = <&BRG0>;
+	     cunit = <&CUNIT>;
+	     mpscrouting = <&MPSCROUTING>;
+	     mpscintr = <&MPSCINTR>;
+	     cell-index = <0>;
+	     max_idle = <40>;
+	     interrupts = <40>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   j) Marvell Discovery Watch Dog Timer nodes
+
+   Represent the Discovery's watchdog timer hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-wdt"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery Watch Dog Timer node:
+     wdt@b410 {
+	     compatible = "marvell,mv64360-wdt";
+	     reg = <0xb410 0x8>;
+     };
+
+
+   k) Marvell Discovery I2C nodes
+
+   Represent the Discovery's I2C hardware
+
+   Required properties:
+     - device_type : "i2c"
+     - compatible : "marvell,mv64360-i2c"
+     - reg : Offset and length of the register set for this device
+     - interrupts : <a> where a is the interrupt number for the I2C.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery I2C node:
+	     compatible = "marvell,mv64360-i2c";
+	     reg = <0xc000 0x20>;
+	     virtual-reg = <0xf100c000>;
+	     interrupts = <37>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
+
+   Represent the Discovery's PIC hardware
+
+   Required properties:
+     - #interrupt-cells : <1>
+     - #address-cells : <0>
+     - compatible : "marvell,mv64360-pic"
+     - reg : Offset and length of the register set for this device
+     - interrupt-controller
+
+   Example Discovery PIC node:
+     pic {
+	     #interrupt-cells = <1>;
+	     #address-cells = <0>;
+	     compatible = "marvell,mv64360-pic";
+	     reg = <0x0 0x88>;
+	     interrupt-controller;
+     };
+
+
+   m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
+
+   Represent the Discovery's MPP hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-mpp"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery MPP node:
+     mpp@f000 {
+	     compatible = "marvell,mv64360-mpp";
+	     reg = <0xf000 0x10>;
+     };
+
+
+   n) Marvell Discovery GPP (General Purpose Pins) nodes
+
+   Represent the Discovery's GPP hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-gpp"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery GPP node:
+     gpp@f000 {
+	     compatible = "marvell,mv64360-gpp";
+	     reg = <0xf100 0x20>;
+     };
+
+
+   o) Marvell Discovery PCI host bridge node
+
+   Represents the Discovery's PCI host bridge device.  The properties
+   for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
+   1275-1994.  A typical value for the compatible property is
+   "marvell,mv64360-pci".
+
+   Example Discovery PCI host bridge node
+     pci@80000000 {
+	     #address-cells = <3>;
+	     #size-cells = <2>;
+	     #interrupt-cells = <1>;
+	     device_type = "pci";
+	     compatible = "marvell,mv64360-pci";
+	     reg = <0xcf8 0x8>;
+	     ranges = <0x01000000 0x0        0x0
+			     0x88000000 0x0 0x01000000
+		       0x02000000 0x0 0x80000000
+			     0x80000000 0x0 0x08000000>;
+	     bus-range = <0 255>;
+	     clock-frequency = <66000000>;
+	     interrupt-parent = <&PIC>;
+	     interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+	     interrupt-map = <
+		     /* IDSEL 0x0a */
+		     0x5000 0 0 1 &PIC 80
+		     0x5000 0 0 2 &PIC 81
+		     0x5000 0 0 3 &PIC 91
+		     0x5000 0 0 4 &PIC 93
+
+		     /* IDSEL 0x0b */
+		     0x5800 0 0 1 &PIC 91
+		     0x5800 0 0 2 &PIC 93
+		     0x5800 0 0 3 &PIC 80
+		     0x5800 0 0 4 &PIC 81
+
+		     /* IDSEL 0x0c */
+		     0x6000 0 0 1 &PIC 91
+		     0x6000 0 0 2 &PIC 93
+		     0x6000 0 0 3 &PIC 80
+		     0x6000 0 0 4 &PIC 81
+
+		     /* IDSEL 0x0d */
+		     0x6800 0 0 1 &PIC 93
+		     0x6800 0 0 2 &PIC 80
+		     0x6800 0 0 3 &PIC 81
+		     0x6800 0 0 4 &PIC 91
+	     >;
+     };
+
+
+   p) Marvell Discovery CPU Error nodes
+
+   Represent the Discovery's CPU error handler device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-cpu-error"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery CPU Error node:
+     cpu-error@0070 {
+	     compatible = "marvell,mv64360-cpu-error";
+	     reg = <0x70 0x10 0x128 0x28>;
+	     interrupts = <3>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   q) Marvell Discovery SRAM Controller nodes
+
+   Represent the Discovery's SRAM controller device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-sram-ctrl"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery SRAM Controller node:
+     sram-ctrl@0380 {
+	     compatible = "marvell,mv64360-sram-ctrl";
+	     reg = <0x380 0x80>;
+	     interrupts = <13>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   r) Marvell Discovery PCI Error Handler nodes
+
+   Represent the Discovery's PCI error handler device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-pci-error"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery PCI Error Handler node:
+     pci-error@1d40 {
+	     compatible = "marvell,mv64360-pci-error";
+	     reg = <0x1d40 0x40 0xc28 0x4>;
+	     interrupts = <12>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   s) Marvell Discovery Memory Controller nodes
+
+   Represent the Discovery's memory controller device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-mem-ctrl"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery Memory Controller node:
+     mem-ctrl@1400 {
+	     compatible = "marvell,mv64360-mem-ctrl";
+	     reg = <0x1400 0x60>;
+	     interrupts = <17>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
diff --git a/Documentation/powerpc/dts-bindings/phy.txt b/Documentation/powerpc/dts-bindings/phy.txt
new file mode 100644
index 00000000000..bb8c742eb8c
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/phy.txt
@@ -0,0 +1,25 @@
+PHY nodes
+
+Required properties:
+
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a b> where a is the interrupt number and b is a
+   field that represents an encoding of the sense and level
+   information for the interrupt.  This should be encoded based on
+   the information in section 2) depending on the type of interrupt
+   controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+ - linux,phandle :  phandle for this node; likely referenced by an
+   ethernet controller node.
+
+Example:
+
+ethernet-phy@0 {
+	linux,phandle = <2452000>
+	interrupt-parent = <40000>;
+	interrupts = <35 1>;
+	reg = <0>;
+	device_type = "ethernet-phy";
+};
diff --git a/Documentation/powerpc/dts-bindings/spi-bus.txt b/Documentation/powerpc/dts-bindings/spi-bus.txt
new file mode 100644
index 00000000000..e782add2e45
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/spi-bus.txt
@@ -0,0 +1,57 @@
+SPI (Serial Peripheral Interface) busses
+
+SPI busses can be described with a node for the SPI master device
+and a set of child nodes for each SPI slave on the bus.  For this
+discussion, it is assumed that the system's SPI controller is in
+SPI master mode.  This binding does not describe SPI controllers
+in slave mode.
+
+The SPI master node requires the following properties:
+- #address-cells  - number of cells required to define a chip select
+    		address on the SPI bus.
+- #size-cells     - should be zero.
+- compatible      - name of SPI bus controller following generic names
+    		recommended practice.
+No other properties are required in the SPI bus node.  It is assumed
+that a driver for an SPI bus device will understand that it is an SPI bus.
+However, the binding does not attempt to define the specific method for
+assigning chip select numbers.  Since SPI chip select configuration is
+flexible and non-standardized, it is left out of this binding with the
+assumption that board specific platform code will be used to manage
+chip selects.  Individual drivers can define additional properties to
+support describing the chip select layout.
+
+SPI slave nodes must be children of the SPI master node and can
+contain the following properties.
+- reg             - (required) chip select address of device.
+- compatible      - (required) name of SPI device following generic names
+    		recommended practice
+- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+- spi-cpol        - (optional) Empty property indicating device requires
+    		inverse clock polarity (CPOL) mode
+- spi-cpha        - (optional) Empty property indicating device requires
+    		shifted clock phase (CPHA) mode
+- spi-cs-high     - (optional) Empty property indicating device requires
+    		chip select active high
+
+SPI example for an MPC5200 SPI bus:
+	spi@f00 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+		reg = <0xf00 0x20>;
+		interrupts = <2 13 0 2 14 0>;
+		interrupt-parent = <&mpc5200_pic>;
+
+		ethernet-switch@0 {
+			compatible = "micrel,ks8995m";
+			spi-max-frequency = <1000000>;
+			reg = <0>;
+		};
+
+		codec@1 {
+			compatible = "ti,tlv320aic26";
+			spi-max-frequency = <100000>;
+			reg = <1>;
+		};
+	};
diff --git a/Documentation/powerpc/dts-bindings/usb-ehci.txt b/Documentation/powerpc/dts-bindings/usb-ehci.txt
new file mode 100644
index 00000000000..fa18612f757
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/usb-ehci.txt
@@ -0,0 +1,25 @@
+USB EHCI controllers
+
+Required properties:
+  - compatible : should be "usb-ehci".
+  - reg : should contain at least address and length of the standard EHCI
+    register set for the device. Optional platform-dependent registers
+    (debug-port or other) can be also specified here, but only after
+    definition of standard EHCI registers.
+  - interrupts : one EHCI interrupt should be described here.
+If device registers are implemented in big endian mode, the device
+node should have "big-endian-regs" property.
+If controller implementation operates with big endian descriptors,
+"big-endian-desc" property should be specified.
+If both big endian registers and descriptors are used by the controller
+implementation, "big-endian" property can be specified instead of having
+both "big-endian-regs" and "big-endian-desc".
+
+Example (Sequoia 440EPx):
+    ehci@e0000300 {
+	   compatible = "ibm,usb-ehci-440epx", "usb-ehci";
+	   interrupt-parent = <&UIC0>;
+	   interrupts = <1a 4>;
+	   reg = <0 e0000300 90 0 e0000390 70>;
+	   big-endian;
+   };
diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt
new file mode 100644
index 00000000000..80339fe4300
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/xilinx.txt
@@ -0,0 +1,295 @@
+   d) Xilinx IP cores
+
+   The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
+   in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
+   of standard device types (network, serial, etc.) and miscellaneous
+   devices (gpio, LCD, spi, etc).  Also, since these devices are
+   implemented within the fpga fabric every instance of the device can be
+   synthesised with different options that change the behaviour.
+
+   Each IP-core has a set of parameters which the FPGA designer can use to
+   control how the core is synthesized.  Historically, the EDK tool would
+   extract the device parameters relevant to device drivers and copy them
+   into an 'xparameters.h' in the form of #define symbols.  This tells the
+   device drivers how the IP cores are configured, but it requres the kernel
+   to be recompiled every time the FPGA bitstream is resynthesized.
+
+   The new approach is to export the parameters into the device tree and
+   generate a new device tree each time the FPGA bitstream changes.  The
+   parameters which used to be exported as #defines will now become
+   properties of the device node.  In general, device nodes for IP-cores
+   will take the following form:
+
+	(name): (generic-name)@(base-address) {
+		compatible = "xlnx,(ip-core-name)-(HW_VER)"
+			     [, (list of compatible devices), ...];
+		reg = <(baseaddr) (size)>;
+		interrupt-parent = <&interrupt-controller-phandle>;
+		interrupts = < ... >;
+		xlnx,(parameter1) = "(string-value)";
+		xlnx,(parameter2) = <(int-value)>;
+	};
+
+	(generic-name):   an open firmware-style name that describes the
+			generic class of device.  Preferably, this is one word, such
+			as 'serial' or 'ethernet'.
+	(ip-core-name):	the name of the ip block (given after the BEGIN
+			directive in system.mhs).  Should be in lowercase
+			and all underscores '_' converted to dashes '-'.
+	(name):		is derived from the "PARAMETER INSTANCE" value.
+	(parameter#):	C_* parameters from system.mhs.  The C_ prefix is
+			dropped from the parameter name, the name is converted
+			to lowercase and all underscore '_' characters are
+			converted to dashes '-'.
+	(baseaddr):	the baseaddr parameter value (often named C_BASEADDR).
+	(HW_VER):	from the HW_VER parameter.
+	(size):		the address range size (often C_HIGHADDR - C_BASEADDR + 1).
+
+   Typically, the compatible list will include the exact IP core version
+   followed by an older IP core version which implements the same
+   interface or any other device with the same interface.
+
+   'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
+
+   For example, the following block from system.mhs:
+
+	BEGIN opb_uartlite
+		PARAMETER INSTANCE = opb_uartlite_0
+		PARAMETER HW_VER = 1.00.b
+		PARAMETER C_BAUDRATE = 115200
+		PARAMETER C_DATA_BITS = 8
+		PARAMETER C_ODD_PARITY = 0
+		PARAMETER C_USE_PARITY = 0
+		PARAMETER C_CLK_FREQ = 50000000
+		PARAMETER C_BASEADDR = 0xEC100000
+		PARAMETER C_HIGHADDR = 0xEC10FFFF
+		BUS_INTERFACE SOPB = opb_7
+		PORT OPB_Clk = CLK_50MHz
+		PORT Interrupt = opb_uartlite_0_Interrupt
+		PORT RX = opb_uartlite_0_RX
+		PORT TX = opb_uartlite_0_TX
+		PORT OPB_Rst = sys_bus_reset_0
+	END
+
+   becomes the following device tree node:
+
+	opb_uartlite_0: serial@ec100000 {
+		device_type = "serial";
+		compatible = "xlnx,opb-uartlite-1.00.b";
+		reg = <ec100000 10000>;
+		interrupt-parent = <&opb_intc_0>;
+		interrupts = <1 0>; // got this from the opb_intc parameters
+		current-speed = <d#115200>;	// standard serial device prop
+		clock-frequency = <d#50000000>;	// standard serial device prop
+		xlnx,data-bits = <8>;
+		xlnx,odd-parity = <0>;
+		xlnx,use-parity = <0>;
+	};
+
+   Some IP cores actually implement 2 or more logical devices.  In
+   this case, the device should still describe the whole IP core with
+   a single node and add a child node for each logical device.  The
+   ranges property can be used to translate from parent IP-core to the
+   registers of each device.  In addition, the parent node should be
+   compatible with the bus type 'xlnx,compound', and should contain
+   #address-cells and #size-cells, as with any other bus.  (Note: this
+   makes the assumption that both logical devices have the same bus
+   binding.  If this is not true, then separate nodes should be used
+   for each logical device).  The 'cell-index' property can be used to
+   enumerate logical devices within an IP core.  For example, the
+   following is the system.mhs entry for the dual ps2 controller found
+   on the ml403 reference design.
+
+	BEGIN opb_ps2_dual_ref
+		PARAMETER INSTANCE = opb_ps2_dual_ref_0
+		PARAMETER HW_VER = 1.00.a
+		PARAMETER C_BASEADDR = 0xA9000000
+		PARAMETER C_HIGHADDR = 0xA9001FFF
+		BUS_INTERFACE SOPB = opb_v20_0
+		PORT Sys_Intr1 = ps2_1_intr
+		PORT Sys_Intr2 = ps2_2_intr
+		PORT Clkin1 = ps2_clk_rx_1
+		PORT Clkin2 = ps2_clk_rx_2
+		PORT Clkpd1 = ps2_clk_tx_1
+		PORT Clkpd2 = ps2_clk_tx_2
+		PORT Rx1 = ps2_d_rx_1
+		PORT Rx2 = ps2_d_rx_2
+		PORT Txpd1 = ps2_d_tx_1
+		PORT Txpd2 = ps2_d_tx_2
+	END
+
+   It would result in the following device tree nodes:
+
+	opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,compound";
+		ranges = <0 a9000000 2000>;
+		// If this device had extra parameters, then they would
+		// go here.
+		ps2@0 {
+			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+			reg = <0 40>;
+			interrupt-parent = <&opb_intc_0>;
+			interrupts = <3 0>;
+			cell-index = <0>;
+		};
+		ps2@1000 {
+			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+			reg = <1000 40>;
+			interrupt-parent = <&opb_intc_0>;
+			interrupts = <3 0>;
+			cell-index = <0>;
+		};
+	};
+
+   Also, the system.mhs file defines bus attachments from the processor
+   to the devices.  The device tree structure should reflect the bus
+   attachments.  Again an example; this system.mhs fragment:
+
+	BEGIN ppc405_virtex4
+		PARAMETER INSTANCE = ppc405_0
+		PARAMETER HW_VER = 1.01.a
+		BUS_INTERFACE DPLB = plb_v34_0
+		BUS_INTERFACE IPLB = plb_v34_0
+	END
+
+	BEGIN opb_intc
+		PARAMETER INSTANCE = opb_intc_0
+		PARAMETER HW_VER = 1.00.c
+		PARAMETER C_BASEADDR = 0xD1000FC0
+		PARAMETER C_HIGHADDR = 0xD1000FDF
+		BUS_INTERFACE SOPB = opb_v20_0
+	END
+
+	BEGIN opb_uart16550
+		PARAMETER INSTANCE = opb_uart16550_0
+		PARAMETER HW_VER = 1.00.d
+		PARAMETER C_BASEADDR = 0xa0000000
+		PARAMETER C_HIGHADDR = 0xa0001FFF
+		BUS_INTERFACE SOPB = opb_v20_0
+	END
+
+	BEGIN plb_v34
+		PARAMETER INSTANCE = plb_v34_0
+		PARAMETER HW_VER = 1.02.a
+	END
+
+	BEGIN plb_bram_if_cntlr
+		PARAMETER INSTANCE = plb_bram_if_cntlr_0
+		PARAMETER HW_VER = 1.00.b
+		PARAMETER C_BASEADDR = 0xFFFF0000
+		PARAMETER C_HIGHADDR = 0xFFFFFFFF
+		BUS_INTERFACE SPLB = plb_v34_0
+	END
+
+	BEGIN plb2opb_bridge
+		PARAMETER INSTANCE = plb2opb_bridge_0
+		PARAMETER HW_VER = 1.01.a
+		PARAMETER C_RNG0_BASEADDR = 0x20000000
+		PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
+		PARAMETER C_RNG1_BASEADDR = 0x60000000
+		PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
+		PARAMETER C_RNG2_BASEADDR = 0x80000000
+		PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
+		PARAMETER C_RNG3_BASEADDR = 0xC0000000
+		PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
+		BUS_INTERFACE SPLB = plb_v34_0
+		BUS_INTERFACE MOPB = opb_v20_0
+	END
+
+   Gives this device tree (some properties removed for clarity):
+
+	plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v34-1.02.a";
+		device_type = "ibm,plb";
+		ranges; // 1:1 translation
+
+		plb_bram_if_cntrl_0: bram@ffff0000 {
+			reg = <ffff0000 10000>;
+		}
+
+		opb@20000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <20000000 20000000 20000000
+				  60000000 60000000 20000000
+				  80000000 80000000 40000000
+				  c0000000 c0000000 20000000>;
+
+			opb_uart16550_0: serial@a0000000 {
+				reg = <a00000000 2000>;
+			};
+
+			opb_intc_0: interrupt-controller@d1000fc0 {
+				reg = <d1000fc0 20>;
+			};
+		};
+	};
+
+   That covers the general approach to binding xilinx IP cores into the
+   device tree.  The following are bindings for specific devices:
+
+      i) Xilinx ML300 Framebuffer
+
+      Simple framebuffer device from the ML300 reference design (also on the
+      ML403 reference design as well as others).
+
+      Optional properties:
+       - resolution = <xres yres> : pixel resolution of framebuffer.  Some
+                                    implementations use a different resolution.
+                                    Default is <d#640 d#480>
+       - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
+                                           Default is <d#1024 d#480>.
+       - rotate-display (empty) : rotate display 180 degrees.
+
+      ii) Xilinx SystemACE
+
+      The Xilinx SystemACE device is used to program FPGAs from an FPGA
+      bitstream stored on a CF card.  It can also be used as a generic CF
+      interface device.
+
+      Optional properties:
+       - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
+
+      iii) Xilinx EMAC and Xilinx TEMAC
+
+      Xilinx Ethernet devices.  In addition to general xilinx properties
+      listed above, nodes for these devices should include a phy-handle
+      property, and may include other common network device properties
+      like local-mac-address.
+
+      iv) Xilinx Uartlite
+
+      Xilinx uartlite devices are simple fixed speed serial ports.
+
+      Required properties:
+       - current-speed : Baud rate of uartlite
+
+      v) Xilinx hwicap
+
+		Xilinx hwicap devices provide access to the configuration logic
+		of the FPGA through the Internal Configuration Access Port
+		(ICAP).  The ICAP enables partial reconfiguration of the FPGA,
+		readback of the configuration information, and some control over
+		'warm boots' of the FPGA fabric.
+
+		Required properties:
+		- xlnx,family : The family of the FPGA, necessary since the
+                      capabilities of the underlying ICAP hardware
+                      differ between different families.  May be
+                      'virtex2p', 'virtex4', or 'virtex5'.
+
+      vi) Xilinx Uart 16550
+
+      Xilinx UART 16550 devices are very similar to the NS16550 but with
+      different register spacing and an offset from the base address.
+
+      Required properties:
+       - clock-frequency : Frequency of the clock input
+       - reg-offset : A value of 3 is required
+       - reg-shift : A value of 2 is required
+
+
diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt
index 1df7f9cdab0..86eabe6c341 100644
--- a/Documentation/scheduler/sched-rt-group.txt
+++ b/Documentation/scheduler/sched-rt-group.txt
@@ -73,7 +73,7 @@ The remaining CPU time will be used for user input and other tasks. Because
 realtime tasks have explicitly allocated the CPU time they need to perform
 their tasks, buffer underruns in the graphics or audio can be eliminated.
 
-NOTE: the above example is not fully implemented as of yet (2.6.25). We still
+NOTE: the above example is not fully implemented yet. We still
 lack an EDF scheduler to make non-uniform periods usable.
 
 
@@ -140,14 +140,15 @@ The other option is:
 
 .o CONFIG_CGROUP_SCHED (aka "Basis for grouping tasks" = "Control groups")
 
-This uses the /cgroup virtual file system and "/cgroup/<cgroup>/cpu.rt_runtime_us"
-to control the CPU time reserved for each control group instead.
+This uses the /cgroup virtual file system and
+"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
+control group instead.
 
 For more information on working with control groups, you should read
 Documentation/cgroups/cgroups.txt as well.
 
-Group settings are checked against the following limits in order to keep the configuration
-schedulable:
+Group settings are checked against the following limits in order to keep the
+configuration schedulable:
 
    \Sum_{i} runtime_{i} / global_period <= global_runtime / global_period
 
@@ -189,7 +190,7 @@ Implementing SCHED_EDF might take a while to complete. Priority Inheritance is
 the biggest challenge as the current linux PI infrastructure is geared towards
 the limited static priority levels 0-99. With deadline scheduling you need to
 do deadline inheritance (since priority is inversely proportional to the
-deadline delta (deadline - now).
+deadline delta (deadline - now)).
 
 This means the whole PI machinery will have to be reworked - and that is one of
 the most complex pieces of code we have.
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 0d8d23581c4..939a3dd5814 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -240,6 +240,7 @@ AD1986A
   laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
   ultra		2-channel with EAPD (Samsung Ultra tablet PC)
   samsung	2-channel with EAPD (Samsung R65)
+  samsung-p50	2-channel with HP-automute (Samsung P50)
 
 AD1988/AD1988B/AD1989A/AD1989B
 ==============================
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index 381908d8ca4..719a819f8cc 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -101,6 +101,8 @@ card*/pcm*/xrun_debug
 	  bit 0 = Enable XRUN/jiffies debug messages
 	  bit 1 = Show stack trace at XRUN / jiffies check
 	  bit 2 = Enable additional jiffies check
+	  bit 3 = Log hwptr update at each period interrupt
+	  bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
 
 	When the bit 0 is set, the driver will show the messages to
 	kernel log when an xrun is detected.  The debug message is
@@ -117,6 +119,9 @@ card*/pcm*/xrun_debug
 	buggy) hardware that doesn't give smooth pointer updates.
 	This feature is enabled via the bit 2.
 
+	Bits 3 and 4 are for logging the hwptr records.  Note that
+	these will give flood of kernel messages.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 
diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c
index cf0e3ce0d52..c1a5aad3c75 100644
--- a/Documentation/spi/spidev_test.c
+++ b/Documentation/spi/spidev_test.c
@@ -99,11 +99,13 @@ void parse_opts(int argc, char *argv[])
 			{ "lsb",     0, 0, 'L' },
 			{ "cs-high", 0, 0, 'C' },
 			{ "3wire",   0, 0, '3' },
+			{ "no-cs",   0, 0, 'N' },
+			{ "ready",   0, 0, 'R' },
 			{ NULL, 0, 0, 0 },
 		};
 		int c;
 
-		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3", lopts, NULL);
+		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR", lopts, NULL);
 
 		if (c == -1)
 			break;
@@ -139,6 +141,12 @@ void parse_opts(int argc, char *argv[])
 		case '3':
 			mode |= SPI_3WIRE;
 			break;
+		case 'N':
+			mode |= SPI_NO_CS;
+			break;
+		case 'R':
+			mode |= SPI_READY;
+			break;
 		default:
 			print_usage(argv[0]);
 			break;
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index cf42b820ff9..d56a0177542 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -66,7 +66,8 @@ On all -  write a character to /proc/sysrq-trigger.  e.g.:
 'b'     - Will immediately reboot the system without syncing or unmounting
           your disks.
 
-'c'	- Will perform a kexec reboot in order to take a crashdump.
+'c'	- Will perform a system crash by a NULL pointer dereference.
+          A crashdump will be taken if configured.
 
 'd'	- Shows all locks that are held.
 
@@ -141,8 +142,8 @@ useful when you want to exit a program that will not let you switch consoles.
 re'B'oot is good when you're unable to shut down. But you should also 'S'ync
 and 'U'mount first.
 
-'C'rashdump can be used to manually trigger a crashdump when the system is hung.
-The kernel needs to have been built with CONFIG_KEXEC enabled.
+'C'rash can be used to manually trigger a crashdump when the system is hung.
+Note that this just triggers a crash if there is no dump mechanism available.
 
 'S'ync is great when your system is locked up, it allows you to sync your
 disks and will certainly lessen the chance of data loss and fscking. Note
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 873630e7e53..e352d754875 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -1,5 +1,5 @@
   0 -> Unknown EM2800 video grabber             (em2800)        [eb1a:2800]
-  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
+  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
   2 -> Terratec Cinergy 250 USB                 (em2820/em2840) [0ccd:0036]
   3 -> Pinnacle PCTV USB 2                      (em2820/em2840) [2304:0208]
   4 -> Hauppauge WinTV USB 2                    (em2820/em2840) [2040:4200,2040:4201]
@@ -20,7 +20,7 @@
  19 -> EM2860/SAA711X Reference Design          (em2860)
  20 -> AMD ATI TV Wonder HD 600                 (em2880)        [0438:b002]
  21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800)        [eb1a:2801]
- 22 -> Unknown EM2750/EM2751 webcam grabber     (em2750)        [eb1a:2750,eb1a:2751]
+ 22 -> EM2710/EM2750/EM2751 webcam grabber      (em2750)        [eb1a:2750,eb1a:2751]
  23 -> Huaqi DLCW-130                           (em2750)
  24 -> D-Link DUB-T210 TV Tuner                 (em2820/em2840) [2001:f112]
  25 -> Gadmei UTV310                            (em2820/em2840)
@@ -66,3 +66,4 @@
  68 -> Terratec AV350                           (em2860)        [0ccd:0084]
  69 -> KWorld ATSC 315U HDTV TV Box             (em2882)        [eb1a:a313]
  70 -> Evga inDtube                             (em2882)
+ 71 -> Silvercrest Webcam 1.3mpix               (em2820/em2840)
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 15562427e8a..c913e561419 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -153,8 +153,8 @@
 152 -> Asus Tiger Rev:1.00                      [1043:4857]
 153 -> Kworld Plus TV Analog Lite PCI           [17de:7128]
 154 -> Avermedia AVerTV GO 007 FM Plus          [1461:f31d]
-155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid  [0070:6706,0070:6708]
-156 -> Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid   [0070:6707,0070:6709,0070:670a]
+155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid  [0070:6706,0070:6708]
+156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid     [0070:6707,0070:6709,0070:670a]
 157 -> Avermedia AVerTV Studio 507UA            [1461:a11b]
 158 -> AVerMedia Cardbus TV/Radio (E501R)       [1461:b7e9]
 159 -> Beholder BeholdTV 505 RDS                [0000:505B]
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 2bcf78896e2..573f95b5880 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -44,7 +44,9 @@ zc3xx		0458:7007	Genius VideoCam V2
 zc3xx		0458:700c	Genius VideoCam V3
 zc3xx		0458:700f	Genius VideoCam Web V2
 sonixj		0458:7025	Genius Eye 311Q
+sn9c20x		0458:7029	Genius Look 320s
 sonixj		0458:702e	Genius Slim 310 NB
+sn9c20x		045e:00f4	LifeCam VX-6000 (SN9C20x + OV9650)
 sonixj		045e:00f5	MicroSoft VX3000
 sonixj		045e:00f7	MicroSoft VX1000
 ov519		045e:028c	Micro$oft xbox cam
@@ -282,6 +284,28 @@ sonixj		0c45:613a	Microdia Sonix PC Camera
 sonixj		0c45:613b	Surfer SN-206
 sonixj		0c45:613c	Sonix Pccam168
 sonixj		0c45:6143	Sonix Pccam168
+sn9c20x		0c45:6240	PC Camera (SN9C201 + MT9M001)
+sn9c20x		0c45:6242	PC Camera (SN9C201 + MT9M111)
+sn9c20x		0c45:6248	PC Camera (SN9C201 + OV9655)
+sn9c20x		0c45:624e	PC Camera (SN9C201 + SOI968)
+sn9c20x		0c45:624f	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6251	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6253	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6260	PC Camera (SN9C201 + OV7670)
+sn9c20x		0c45:6270	PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112)
+sn9c20x		0c45:627b	PC Camera (SN9C201 + OV7660)
+sn9c20x		0c45:627c	PC Camera (SN9C201 + HV7131R)
+sn9c20x		0c45:627f	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6280	PC Camera (SN9C202 + MT9M001)
+sn9c20x		0c45:6282	PC Camera (SN9C202 + MT9M111)
+sn9c20x		0c45:6288	PC Camera (SN9C202 + OV9655)
+sn9c20x		0c45:628e	PC Camera (SN9C202 + SOI968)
+sn9c20x		0c45:628f	PC Camera (SN9C202 + OV9650)
+sn9c20x		0c45:62a0	PC Camera (SN9C202 + OV7670)
+sn9c20x		0c45:62b0	PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
+sn9c20x		0c45:62b3	PC Camera (SN9C202 + OV9655)
+sn9c20x		0c45:62bb	PC Camera (SN9C202 + OV7660)
+sn9c20x		0c45:62bc	PC Camera (SN9C202 + HV7131R)
 sunplus		0d64:0303	Sunplus FashionCam DXG
 etoms		102c:6151	Qcam Sangha CIF
 etoms		102c:6251	Qcam xxxxxx VGA
@@ -290,6 +314,7 @@ spca561		10fd:7e50	FlyCam Usb 100
 zc3xx		10fd:8050	Typhoon Webshot II USB 300k
 ov534		1415:2000	Sony HD Eye for PS3 (SLEH 00201)
 pac207		145f:013a	Trust WB-1300N
+sn9c20x		145f:013d	Trust WB-3600R
 vc032x		15b8:6001	HP 2.0 Megapixel
 vc032x		15b8:6002	HP 2.0 Megapixel rz406aa
 spca501		1776:501c	Arowana 300K CMOS Camera
@@ -300,4 +325,11 @@ spca500		2899:012c	Toptro Industrial
 spca508		8086:0110	Intel Easy PC Camera
 spca500		8086:0630	Intel Pocket PC Camera
 spca506		99fa:8988	Grandtec V.cap
+sn9c20x		a168:0610	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0611	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0613	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0618	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0614	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x		a168:0615	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x		a168:0617	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
 spca561		abcd:cdee	Petcam
diff --git a/Documentation/x86/00-INDEX b/Documentation/x86/00-INDEX
index dbe3377754a..f37b46d3486 100644
--- a/Documentation/x86/00-INDEX
+++ b/Documentation/x86/00-INDEX
@@ -2,3 +2,5 @@
 	- this file
 mtrr.txt
 	- how to use x86 Memory Type Range Registers to increase performance
+exception-tables.txt
+	- why and how Linux kernel uses exception tables on x86
diff --git a/Documentation/exception.txt b/Documentation/x86/exception-tables.txt
index 2d5aded6424..32901aa36f0 100644
--- a/Documentation/exception.txt
+++ b/Documentation/x86/exception-tables.txt
@@ -1,123 +1,123 @@
-     Kernel level exception handling in Linux 2.1.8
+     Kernel level exception handling in Linux
   Commentary by Joerg Pommnitz <joerg@raleigh.ibm.com>
 
-When a process runs in kernel mode, it often has to access user 
-mode memory whose address has been passed by an untrusted program. 
+When a process runs in kernel mode, it often has to access user
+mode memory whose address has been passed by an untrusted program.
 To protect itself the kernel has to verify this address.
 
-In older versions of Linux this was done with the 
-int verify_area(int type, const void * addr, unsigned long size) 
+In older versions of Linux this was done with the
+int verify_area(int type, const void * addr, unsigned long size)
 function (which has since been replaced by access_ok()).
 
-This function verified that the memory area starting at address 
+This function verified that the memory area starting at address
 'addr' and of size 'size' was accessible for the operation specified
-in type (read or write). To do this, verify_read had to look up the 
-virtual memory area (vma) that contained the address addr. In the 
-normal case (correctly working program), this test was successful. 
+in type (read or write). To do this, verify_read had to look up the
+virtual memory area (vma) that contained the address addr. In the
+normal case (correctly working program), this test was successful.
 It only failed for a few buggy programs. In some kernel profiling
 tests, this normally unneeded verification used up a considerable
 amount of time.
 
-To overcome this situation, Linus decided to let the virtual memory 
+To overcome this situation, Linus decided to let the virtual memory
 hardware present in every Linux-capable CPU handle this test.
 
 How does this work?
 
-Whenever the kernel tries to access an address that is currently not 
-accessible, the CPU generates a page fault exception and calls the 
-page fault handler 
+Whenever the kernel tries to access an address that is currently not
+accessible, the CPU generates a page fault exception and calls the
+page fault handler
 
 void do_page_fault(struct pt_regs *regs, unsigned long error_code)
 
-in arch/i386/mm/fault.c. The parameters on the stack are set up by 
-the low level assembly glue in arch/i386/kernel/entry.S. The parameter
-regs is a pointer to the saved registers on the stack, error_code 
+in arch/x86/mm/fault.c. The parameters on the stack are set up by
+the low level assembly glue in arch/x86/kernel/entry_32.S. The parameter
+regs is a pointer to the saved registers on the stack, error_code
 contains a reason code for the exception.
 
-do_page_fault first obtains the unaccessible address from the CPU 
-control register CR2. If the address is within the virtual address 
-space of the process, the fault probably occurred, because the page 
-was not swapped in, write protected or something similar. However, 
-we are interested in the other case: the address is not valid, there 
-is no vma that contains this address. In this case, the kernel jumps 
-to the bad_area label. 
-
-There it uses the address of the instruction that caused the exception 
-(i.e. regs->eip) to find an address where the execution can continue 
-(fixup). If this search is successful, the fault handler modifies the 
-return address (again regs->eip) and returns. The execution will 
+do_page_fault first obtains the unaccessible address from the CPU
+control register CR2. If the address is within the virtual address
+space of the process, the fault probably occurred, because the page
+was not swapped in, write protected or something similar. However,
+we are interested in the other case: the address is not valid, there
+is no vma that contains this address. In this case, the kernel jumps
+to the bad_area label.
+
+There it uses the address of the instruction that caused the exception
+(i.e. regs->eip) to find an address where the execution can continue
+(fixup). If this search is successful, the fault handler modifies the
+return address (again regs->eip) and returns. The execution will
 continue at the address in fixup.
 
 Where does fixup point to?
 
-Since we jump to the contents of fixup, fixup obviously points 
-to executable code. This code is hidden inside the user access macros. 
-I have picked the get_user macro defined in include/asm/uaccess.h as an
-example. The definition is somewhat hard to follow, so let's peek at 
+Since we jump to the contents of fixup, fixup obviously points
+to executable code. This code is hidden inside the user access macros.
+I have picked the get_user macro defined in arch/x86/include/asm/uaccess.h
+as an example. The definition is somewhat hard to follow, so let's peek at
 the code generated by the preprocessor and the compiler. I selected
-the get_user call in drivers/char/console.c for a detailed examination.
+the get_user call in drivers/char/sysrq.c for a detailed examination.
 
-The original code in console.c line 1405:
+The original code in sysrq.c line 587:
         get_user(c, buf);
 
 The preprocessor output (edited to become somewhat readable):
 
 (
-  {        
-    long __gu_err = - 14 , __gu_val = 0;        
-    const __typeof__(*( (  buf ) )) *__gu_addr = ((buf));        
-    if (((((0 + current_set[0])->tss.segment) == 0x18 )  || 
-       (((sizeof(*(buf))) <= 0xC0000000UL) && 
-       ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf)))))))        
+  {
+    long __gu_err = - 14 , __gu_val = 0;
+    const __typeof__(*( (  buf ) )) *__gu_addr = ((buf));
+    if (((((0 + current_set[0])->tss.segment) == 0x18 )  ||
+       (((sizeof(*(buf))) <= 0xC0000000UL) &&
+       ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf)))))))
       do {
-        __gu_err  = 0;        
-        switch ((sizeof(*(buf)))) {        
-          case 1: 
-            __asm__ __volatile__(        
-              "1:      mov" "b" " %2,%" "b" "1\n"        
-              "2:\n"        
-              ".section .fixup,\"ax\"\n"        
-              "3:      movl %3,%0\n"        
-              "        xor" "b" " %" "b" "1,%" "b" "1\n"        
-              "        jmp 2b\n"        
-              ".section __ex_table,\"a\"\n"        
-              "        .align 4\n"        
-              "        .long 1b,3b\n"        
+        __gu_err  = 0;
+        switch ((sizeof(*(buf)))) {
+          case 1:
+            __asm__ __volatile__(
+              "1:      mov" "b" " %2,%" "b" "1\n"
+              "2:\n"
+              ".section .fixup,\"ax\"\n"
+              "3:      movl %3,%0\n"
+              "        xor" "b" " %" "b" "1,%" "b" "1\n"
+              "        jmp 2b\n"
+              ".section __ex_table,\"a\"\n"
+              "        .align 4\n"
+              "        .long 1b,3b\n"
               ".text"        : "=r"(__gu_err), "=q" (__gu_val): "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )) ; 
-              break;        
-          case 2: 
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )) ;
+              break;
+          case 2:
             __asm__ __volatile__(
-              "1:      mov" "w" " %2,%" "w" "1\n"        
-              "2:\n"        
-              ".section .fixup,\"ax\"\n"        
-              "3:      movl %3,%0\n"        
-              "        xor" "w" " %" "w" "1,%" "w" "1\n"        
-              "        jmp 2b\n"        
-              ".section __ex_table,\"a\"\n"        
-              "        .align 4\n"        
-              "        .long 1b,3b\n"        
+              "1:      mov" "w" " %2,%" "w" "1\n"
+              "2:\n"
+              ".section .fixup,\"ax\"\n"
+              "3:      movl %3,%0\n"
+              "        xor" "w" " %" "w" "1,%" "w" "1\n"
+              "        jmp 2b\n"
+              ".section __ex_table,\"a\"\n"
+              "        .align 4\n"
+              "        .long 1b,3b\n"
               ".text"        : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )); 
-              break;        
-          case 4: 
-            __asm__ __volatile__(        
-              "1:      mov" "l" " %2,%" "" "1\n"        
-              "2:\n"        
-              ".section .fixup,\"ax\"\n"        
-              "3:      movl %3,%0\n"        
-              "        xor" "l" " %" "" "1,%" "" "1\n"        
-              "        jmp 2b\n"        
-              ".section __ex_table,\"a\"\n"        
-              "        .align 4\n"        "        .long 1b,3b\n"        
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  ));
+              break;
+          case 4:
+            __asm__ __volatile__(
+              "1:      mov" "l" " %2,%" "" "1\n"
+              "2:\n"
+              ".section .fixup,\"ax\"\n"
+              "3:      movl %3,%0\n"
+              "        xor" "l" " %" "" "1,%" "" "1\n"
+              "        jmp 2b\n"
+              ".section __ex_table,\"a\"\n"
+              "        .align 4\n"        "        .long 1b,3b\n"
               ".text"        : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(__gu_err)); 
-              break;        
-          default: 
-            (__gu_val) = __get_user_bad();        
-        }        
-      } while (0) ;        
-    ((c)) = (__typeof__(*((buf))))__gu_val;        
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(__gu_err));
+              break;
+          default:
+            (__gu_val) = __get_user_bad();
+        }
+      } while (0) ;
+    ((c)) = (__typeof__(*((buf))))__gu_val;
     __gu_err;
   }
 );
@@ -127,12 +127,12 @@ see what code gcc generates:
 
  >         xorl %edx,%edx
  >         movl current_set,%eax
- >         cmpl $24,788(%eax)        
- >         je .L1424        
+ >         cmpl $24,788(%eax)
+ >         je .L1424
  >         cmpl $-1073741825,64(%esp)
- >         ja .L1423                
+ >         ja .L1423
  > .L1424:
- >         movl %edx,%eax                        
+ >         movl %edx,%eax
  >         movl 64(%esp),%ebx
  > #APP
  > 1:      movb (%ebx),%dl                /* this is the actual user access */
@@ -149,17 +149,17 @@ see what code gcc generates:
  > .L1423:
  >         movzbl %dl,%esi
 
-The optimizer does a good job and gives us something we can actually 
-understand. Can we? The actual user access is quite obvious. Thanks 
-to the unified address space we can just access the address in user 
+The optimizer does a good job and gives us something we can actually
+understand. Can we? The actual user access is quite obvious. Thanks
+to the unified address space we can just access the address in user
 memory. But what does the .section stuff do?????
 
 To understand this we have to look at the final kernel:
 
  > objdump --section-headers vmlinux
- > 
+ >
  > vmlinux:     file format elf32-i386
- > 
+ >
  > Sections:
  > Idx Name          Size      VMA       LMA       File off  Algn
  >   0 .text         00098f40  c0100000  c0100000  00001000  2**4
@@ -198,18 +198,18 @@ final kernel executable:
 
 The whole user memory access is reduced to 10 x86 machine instructions.
 The instructions bracketed in the .section directives are no longer
-in the normal execution path. They are located in a different section 
+in the normal execution path. They are located in a different section
 of the executable file:
 
  > objdump --disassemble --section=.fixup vmlinux
- > 
+ >
  > c0199ff5 <.fixup+10b5> movl   $0xfffffff2,%eax
  > c0199ffa <.fixup+10ba> xorb   %dl,%dl
  > c0199ffc <.fixup+10bc> jmp    c017e7a7 <do_con_write+e3>
 
 And finally:
  > objdump --full-contents --section=__ex_table vmlinux
- > 
+ >
  >  c01aa7c4 93c017c0 e09f19c0 97c017c0 99c017c0  ................
  >  c01aa7d4 f6c217c0 e99f19c0 a5e717c0 f59f19c0  ................
  >  c01aa7e4 080a18c0 01a019c0 0a0a18c0 04a019c0  ................
@@ -235,8 +235,8 @@ sections in the ELF object file. So the instructions
 ended up in the .fixup section of the object file and the addresses
         .long 1b,3b
 ended up in the __ex_table section of the object file. 1b and 3b
-are local labels. The local label 1b (1b stands for next label 1 
-backward) is the address of the instruction that might fault, i.e. 
+are local labels. The local label 1b (1b stands for next label 1
+backward) is the address of the instruction that might fault, i.e.
 in our case the address of the label 1 is c017e7a5:
 the original assembly code: > 1:      movb (%ebx),%dl
 and linked in vmlinux     : > c017e7a5 <do_con_write+e1> movb   (%ebx),%dl
@@ -254,7 +254,7 @@ The assembly code
 becomes the value pair
  >  c01aa7d4 c017c2f6 c0199fe9 c017e7a5 c0199ff5  ................
                                ^this is ^this is
-                               1b       3b 
+                               1b       3b
 c017e7a5,c0199ff5 in the exception table of the kernel.
 
 So, what actually happens if a fault from kernel mode with no suitable
@@ -266,9 +266,9 @@ vma occurs?
 3.) CPU calls do_page_fault
 4.) do page fault calls search_exception_table (regs->eip == c017e7a5);
 5.) search_exception_table looks up the address c017e7a5 in the
-    exception table (i.e. the contents of the ELF section __ex_table) 
+    exception table (i.e. the contents of the ELF section __ex_table)
     and returns the address of the associated fault handle code c0199ff5.
-6.) do_page_fault modifies its own return address to point to the fault 
+6.) do_page_fault modifies its own return address to point to the fault
     handle code and returns.
 7.) execution continues in the fault handling code.
 8.) 8a) EAX becomes -EFAULT (== -14)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3ba68dc9fe4..8dca9d89c6c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -73,8 +73,8 @@ Note: For the hard of thinking, this list is meant to remain in alphabetical
 order. If you could add yourselves to it in alphabetical order that would be
 so much easier [Ed]
 
-P: Person
-M: Mail patches to
+P: Person (obsolete)
+M: Mail patches to: FullName <address@domain>
 L: Mailing list that is relevant to this area
 W: Web-page with status/info
 T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit.
@@ -104,88 +104,74 @@ X: Files and directories that are NOT maintained, same rules as F:
    matches all files in and below net excluding net/ipv6/
 
 3C505 NETWORK DRIVER
-P:	Philip Blundell
-M:	philb@gnu.org
+M:	Philip Blundell <philb@gnu.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/3c505*
 
 3C59X NETWORK DRIVER
-P:	Steffen Klassert
-M:	klassert@mathematik.tu-chemnitz.de
+M:	Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/vortex.txt
 F:	drivers/net/3c59x.c
 
 3CR990 NETWORK DRIVER
-P:	David Dillow
-M:	dave@thedillows.org
+M:	David Dillow <dave@thedillows.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/typhoon*
 
 3W-9XXX SATA-RAID CONTROLLER DRIVER
-P:	Adam Radford
-M:	linuxraid@amcc.com
+M:	Adam Radford <linuxraid@amcc.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.amcc.com
 S:	Supported
 F:	drivers/scsi/3w-9xxx*
 
 3W-XXXX ATA-RAID CONTROLLER DRIVER
-P:	Adam Radford
-M:	linuxraid@amcc.com
+M:	Adam Radford <linuxraid@amcc.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.amcc.com
 S:	Supported
 F:	drivers/scsi/3w-xxxx*
 
 53C700 AND 53C700-66 SCSI DRIVER
-P:	James E.J. Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/53c700*
 
 6PACK NETWORK DRIVER FOR AX.25
-P:	Andreas Koensgen
-M:	ajk@iehk.rwth-aachen.de
+M:	Andreas Koensgen <ajk@comnets.uni-bremen.de>
 L:	linux-hams@vger.kernel.org
 S:	Maintained
 F:	drivers/net/hamradio/6pack.c
 
 8169 10/100/1000 GIGABIT ETHERNET DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
+M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
-P:	Alan Cox
-M:	alan@lxorguk.ukuu.org.uk
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
-S:	Odd Fixes
+S:	Orphan
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
 
 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
-P:	Paul Gortmaker
-M:	p_gortmaker@yahoo.com
+M:	Paul Gortmaker <p_gortmaker@yahoo.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/*8390*
 F:	drivers/net/ax88796.c
 
 9P FILE SYSTEM
-P:	Eric Van Hensbergen
-M:	ericvh@gmail.com
-P:	Ron Minnich
-M:	rminnich@sandia.gov
-P:	Latchesar Ionkov
-M:	lucho@ionkov.net
+M:	Eric Van Hensbergen <ericvh@gmail.com>
+M:	Ron Minnich <rminnich@sandia.gov>
+M:	Latchesar Ionkov <lucho@ionkov.net>
 L:	v9fs-developer@lists.sourceforge.net
 W:	http://swik.net/v9fs
 T:	git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git
@@ -194,15 +180,13 @@ F:	Documentation/filesystems/9p.txt
 F:	fs/9p/
 
 A2232 SERIAL BOARD DRIVER
-P:	Enver Haase
-M:	A2232@gmx.net
+M:	Enver Haase <A2232@gmx.net>
 L:	linux-m68k@lists.linux-m68k.org
 S:	Maintained
 F:	drivers/char/ser_a2232*
 
 AACRAID SCSI RAID DRIVER
-P:	Adaptec OEM Raid Solutions
-M:	aacraid@adaptec.com
+M:	Adaptec OEM Raid Solutions <aacraid@adaptec.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.adaptec.com/
 S:	Supported
@@ -210,44 +194,38 @@ F:	Documentation/scsi/aacraid.txt
 F:	drivers/scsi/aacraid/
 
 ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
-P:	Hans de Goede
-M:	j.w.r.degoede@hhs.nl
+M:	Hans de Goede <j.w.r.degoede@hhs.nl>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/abituguru.c
 
 ABIT UGURU 3 HARDWARE MONITOR DRIVER
-P:	Alistair John Strachan
-M:	alistair@devzero.co.uk
+M:	Alistair John Strachan <alistair@devzero.co.uk>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/abituguru3.c
 
 ACENIC DRIVER
-P:	Jes Sorensen
-M:	jes@trained-monkey.org
+M:	Jes Sorensen <jes@trained-monkey.org>
 L:	linux-acenic@sunsite.dk
 S:	Maintained
 F:	drivers/net/acenic*
 
 ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
-P: Peter Feuerer
-M: peter@piie.net
-W: http://piie.net/?section=acerhdf
-S: Maintained
-F: drivers/platform/x86/acerhdf.c
+M:	Peter Feuerer <peter@piie.net>
+W:	http://piie.net/?section=acerhdf
+S:	Maintained
+F:	drivers/platform/x86/acerhdf.c
 
 ACER WMI LAPTOP EXTRAS
-P:	Carlos Corbacho
-M:	carlos@strangeworlds.co.uk
+M:	Carlos Corbacho <carlos@strangeworlds.co.uk>
 L:	aceracpi@googlegroups.com (subscribers-only)
 W:	http://code.google.com/p/aceracpi
 S:	Maintained
 F:	drivers/platform/x86/acer-wmi.c
 
 ACPI
-P:	Len Brown
-M:	lenb@kernel.org
+M:	Len Brown <lenb@kernel.org>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
@@ -257,8 +235,7 @@ F:	drivers/pnp/pnpacpi/
 F:	include/linux/acpi.h
 
 ACPI BATTERY DRIVERS
-P:	Alexey Starikovskiy
-M:	astarikovskiy@suse.de
+M:	Alexey Starikovskiy <astarikovskiy@suse.de>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
@@ -266,80 +243,69 @@ F:	drivers/acpi/battery.c
 F:	drivers/acpi/*sbs*
 
 ACPI EC DRIVER
-P:	Alexey Starikovskiy
-M:	astarikovskiy@suse.de
+M:	Alexey Starikovskiy <astarikovskiy@suse.de>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/ec.c
 
 ACPI FAN DRIVER
-P:	Zhang Rui
-M:	rui.zhang@intel.com
+M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/fan.c
 
 ACPI PCI HOTPLUG DRIVER
-P:	Kristen Carlson Accardi
-M:	kristen.c.accardi@intel.com
+M:	Kristen Carlson Accardi <kristen.c.accardi@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	drivers/pci/hotplug/acpi*
 
 ACPI THERMAL DRIVER
-P:	Zhang Rui
-M:	rui.zhang@intel.com
+M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/*thermal*
 
 ACPI VIDEO DRIVER
-P:	Zhang Rui
-M:	rui.zhang@intel.com
+M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/video.c
 
 ACPI WMI DRIVER
-P:	Carlos Corbacho
-M:	carlos@strangeworlds.co.uk
+M:	Carlos Corbacho <carlos@strangeworlds.co.uk>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Maintained
 F:	drivers/platform/x86/wmi.c
 
 AD1889 ALSA SOUND DRIVER
-P:	Kyle McMartin
-M:	kyle@mcmartin.ca
-P:	Thibaut Varene
-M:	T-Bone@parisc-linux.org
+M:	Kyle McMartin <kyle@mcmartin.ca>
+M:	Thibaut Varene <T-Bone@parisc-linux.org>
 W:	http://wiki.parisc-linux.org/AD1889
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
 F:	sound/pci/ad1889.*
 
 ADM1025 HARDWARE MONITOR DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/adm1025
 F:	drivers/hwmon/adm1025.c
 
 ADM1029 HARDWARE MONITOR DRIVER
-P:	Corentin Labbe
-M:	corentin.labbe@geomatys.fr
+M:	Corentin Labbe <corentin.labbe@geomatys.fr>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/adm1029.c
 
 ADM8211 WIRELESS DRIVER
-P:	Michael Wu
-M:	flamingice@sourmilk.net
+M:	Michael Wu <flamingice@sourmilk.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
@@ -347,35 +313,30 @@ S:	Maintained
 F:	drivers/net/wireless/adm8211.*
 
 ADT746X FAN DRIVER
-P:	Colin Leroy
-M:	colin@colino.net
+M:	Colin Leroy <colin@colino.net>
 S:	Maintained
 F:	drivers/macintosh/therm_adt746x.c
 
 ADVANSYS SCSI DRIVER
-P:	Matthew Wilcox
-M:	matthew@wil.cx
+M:	Matthew Wilcox <matthew@wil.cx>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	Documentation/scsi/advansys.txt
 F:	drivers/scsi/advansys.c
 
 AEDSP16 DRIVER
-P:	Riccardo Facchetti
-M:	fizban@tin.it
+M:	Riccardo Facchetti <fizban@tin.it>
 S:	Maintained
 F:	sound/oss/aedsp16.c
 
 AFFS FILE SYSTEM
-P:	Roman Zippel
-M:	zippel@linux-m68k.org
+M:	Roman Zippel <zippel@linux-m68k.org>
 S:	Maintained
 F:	Documentation/filesystems/affs.txt
 F:	fs/affs/
 
 AFS FILESYSTEM & AF_RXRPC SOCKET DOMAIN
-P:	David Howells
-M:	dhowells@redhat.com
+M:	David Howells <dhowells@redhat.com>
 L:	linux-afs@lists.infradead.org
 S:	Supported
 F:	fs/afs/
@@ -383,40 +344,35 @@ F:	include/net/af_rxrpc.h
 F:	net/rxrpc/af_rxrpc.c
 
 AGPGART DRIVER
-P:	David Airlie
-M:	airlied@linux.ie
+M:	David Airlie <airlied@linux.ie>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/char/agp/
 F:	include/linux/agp*
 
 AHA152X SCSI DRIVER
-P:	Juergen E. Fischer
-M:	fischer@norbit.de
+M:	"Juergen E. Fischer" <fischer@norbit.de>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/aha152x*
 F:	drivers/scsi/pcmcia/aha152x*
 
 AIC7XXX / AIC79XX SCSI DRIVER
-P:	Hannes Reinecke
-M:	hare@suse.de
+M:	Hannes Reinecke <hare@suse.de>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/aic7xxx/
 F:	drivers/scsi/aic7xxx_old/
 
 AIO
-P:	Benjamin LaHaise
-M:	bcrl@kvack.org
+M:	Benjamin LaHaise <bcrl@kvack.org>
 L:	linux-aio@kvack.org
 S:	Supported
 F:	fs/aio.c
 F:	include/linux/*aio*.h
 
 ALCATEL SPEEDTOUCH USB DRIVER
-P:	Duncan Sands
-M:	duncan.sands@free.fr
+M:	Duncan Sands <duncan.sands@free.fr>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org/SpeedTouch/
 S:	Maintained
@@ -424,32 +380,27 @@ F:	drivers/usb/atm/speedtch.c
 F:	drivers/usb/atm/usbatm.c
 
 ALCHEMY AU1XX0 MMC DRIVER
-P:	Manuel Lauss
-M:	manuel.lauss@gmail.com
+M:	Manuel Lauss <manuel.lauss@gmail.com>
 S:	Maintained
 F:	drivers/mmc/host/au1xmmc.c
 
 ALI1563 I2C DRIVER
-P:	Rudolf Marek
-M:	r.marek@assembler.cz
+M:	Rudolf Marek <r.marek@assembler.cz>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-ali1563
 F:	drivers/i2c/busses/i2c-ali1563.c
 
 ALPHA PORT
-P:	Richard Henderson
-M:	rth@twiddle.net
+M:	Richard Henderson <rth@twiddle.net>
 S:	Odd Fixes for 2.4; Maintained for 2.6.
-P:	Ivan Kokshaysky
-M:	ink@jurassic.park.msu.ru
+M:	Ivan Kokshaysky <ink@jurassic.park.msu.ru>
 S:	Maintained for 2.4; PCI support for 2.6.
 L:	linux-alpha@vger.kernel.org
 F:	arch/alpha/
 
 AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
-P:	Thomas Dahlmann
-M:	dahlmann.thomas@arcor.de
+M:	Thomas Dahlmann <dahlmann.thomas@arcor.de>
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/amd5536udc.*
@@ -466,8 +417,7 @@ F:	drivers/video/geode/
 F:	arch/x86/include/asm/geode.h
 
 AMD IOMMU (AMD-VI)
-P:	Joerg Roedel
-M:	joerg.roedel@amd.com
+M:	Joerg Roedel <joerg.roedel@amd.com>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git
 S:	Supported
@@ -475,40 +425,33 @@ F:	arch/x86/kernel/amd_iommu*.c
 F:	arch/x86/include/asm/amd_iommu*.h
 
 AMD MICROCODE UPDATE SUPPORT
-P:	Andreas Herrmann
-M:	andreas.herrmann3@amd.com
+M:	Andreas Herrmann <andreas.herrmann3@amd.com>
 L:	amd64-microcode@amd64.org
 S:	Supported
 F:	arch/x86/kernel/microcode_amd.c
 
 AMS (Apple Motion Sensor) DRIVER
-P:	Stelian Pop
-M:	stelian@popies.net
-P:	Michael Hanselmann
-M:	linux-kernel@hansmi.ch
+M:	Stelian Pop <stelian@popies.net>
+M:	Michael Hanselmann <linux-kernel@hansmi.ch>
 S:	Supported
 F:	drivers/hwmon/ams/
 
 AMSO1100 RNIC DRIVER
-P:	Tom Tucker
-M:	tom@opengridcomputing.com
-P:	Steve Wise
-M:	swise@opengridcomputing.com
+M:	Tom Tucker <tom@opengridcomputing.com>
+M:	Steve Wise <swise@opengridcomputing.com>
 L:	general@lists.openfabrics.org
 S:	Maintained
 F:	drivers/infiniband/hw/amso1100/
 
 AOA (Apple Onboard Audio) ALSA DRIVER
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linuxppc-dev@ozlabs.org
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
 F:	sound/aoa/
 
 APM DRIVER
-P:	Stephen Rothwell
-M:	sfr@canb.auug.org.au
+M:	Stephen Rothwell <sfr@canb.auug.org.au>
 L:	linux-laptop@vger.kernel.org
 W:	http://www.canb.auug.org.au/~sfr/
 S:	Supported
@@ -516,51 +459,44 @@ F:	arch/x86/kernel/apm_32.c
 F:	include/linux/apm_bios.h
 
 APPLE BCM5974 MULTITOUCH DRIVER
-P:	Henrik Rydberg
-M:	rydberg@euromail.se
+M:	Henrik Rydberg <rydberg@euromail.se>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/input/mouse/bcm5974.c
 
 APPLE SMC DRIVER
-P:	Nicolas Boichat
-M:	nicolas@boichat.ch
+M:	Nicolas Boichat <nicolas@boichat.ch>
 L:	mactel-linux-devel@lists.sourceforge.net
 S:	Maintained
 F:	drivers/hwmon/applesmc.c
 
 APPLETALK NETWORK LAYER
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 S:	Maintained
 F:	drivers/net/appletalk/
 F:	net/appletalk/
 
 APPLETOUCH TOUCHPAD DRIVER
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	Documentation/input/appletouch.txt
 F:	drivers/input/mouse/appletouch.c
 
 ARC FRAMEBUFFER DRIVER
-P:	Jaya Kumar
-M:	jayalk@intworks.biz
+M:	Jaya Kumar <jayalk@intworks.biz>
 S:	Maintained
 F:	drivers/video/arcfb.c
 F:	drivers/video/fb_defio.c
 
 ARM MFM AND FLOPPY DRIVERS
-P:	Ian Molton
-M:	spyro@f2s.com
+M:	Ian Molton <spyro@f2s.com>
 S:	Maintained
 F:	arch/arm/lib/floppydma.S
 F:	arch/arm/include/asm/floppy.h
 
 ARM PORT
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
@@ -571,79 +507,67 @@ S:	Orphan
 F:	drivers/mmc/host/mmci.*
 
 ARM/ADI ROADRUNNER MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 F:	arch/arm/mach-ixp23xx/
 F:	arch/arm/mach-ixp23xx/include/mach/
 
 ARM/ADS SPHERE MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/AFEB9260 MACHINE SUPPORT
-P:	Sergey Lapin
-M:	slapin@ossfans.org
+M:	Sergey Lapin <slapin@ossfans.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/AJECO 1ARM MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
-P:	Andrew Victor
-M:	linux@maxim.org.za
+M:	Andrew Victor <linux@maxim.org.za>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://maxim.org.za/at91_26.html
 S:	Maintained
 
 ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/CLKDEV SUPPORT
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 F:	arch/arm/common/clkdev.c
 F:	arch/arm/include/asm/clkdev.h
 
 ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
-P:	Mike Rapoport
-M:	mike@compulab.co.il
+M:	Mike Rapoport <mike@compulab.co.il>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/CORGI MACHINE SUPPORT
-P:	Richard Purdie
-M:	rpurdie@rpsys.net
+M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 
 ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-P:	Paulius Zaleckas
-M:	paulius.zaleckas@teltonika.lt
+M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 T:	git git://gitorious.org/linux-gemini/mainline.git
 S:	Maintained
 F:	arch/arm/mach-gemini/
 
 ARM/EBSA110 MACHINE SUPPORT
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
@@ -651,12 +575,9 @@ F:	arch/arm/mach-ebsa110/
 F:	drivers/net/arm/am79c961a.*
 
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
-P:	Daniel Ribeiro
-M:	drwyrm@gmail.com
-P:	Stefan Schmidt
-M:	stefan@openezx.org
-P:	Harald Welte
-M:	laforge@openezx.org
+M:	Daniel Ribeiro <drwyrm@gmail.com>
+M:	Stefan Schmidt <stefan@openezx.org>
+M:	Harald Welte <laforge@openezx.org>
 L:	openezx-devel@lists.openezx.org (subscribers-only)
 W:	http://www.openezx.org/
 S:	Maintained
@@ -664,15 +585,13 @@ T:	topgit git://git.openezx.org/openezx.git
 F:	arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT
-P:	Paulius Zaleckas
-M:	paulius.zaleckas@teltonika.lt
+M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 F:	arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
@@ -680,175 +599,146 @@ F:	arch/arm/include/asm/hardware/dec21285.h
 F:	arch/arm/mach-footbridge/
 
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
-P:	Sascha Hauer
-M:	kernel@pengutronix.de
+M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/GUMSTIX MACHINE SUPPORT
-P:	Steve Sakoman
-M:	sakoman@gmail.com
+M:	Steve Sakoman <sakoman@gmail.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT
-P:	Philipp Zabel
-M:	philipp.zabel@gmail.com
+M:	Philipp Zabel <philipp.zabel@gmail.com>
 S:	Maintained
 F:	arch/arm/mach-pxa/hx4700.c
 F:	arch/arm/mach-pxa/include/mach/hx4700.h
 
 ARM/HP JORNADA 7XX MACHINE SUPPORT
-P:	Kristoffer Ericson
-M:	kristoffer.ericson@gmail.com
+M:	Kristoffer Ericson <kristoffer.ericson@gmail.com>
 W:	www.jlime.com
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
+F:	arch/arm/mach-sa1100/jornada720.c
+F:	arch/arm/mach-sa1100/include/mach/jornada720.h
 
 ARM/INTEL IOP32X ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/INTEL IOP33X ARM ARCHITECTURE
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/INTEL IOP13XX ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/INTEL IQ81342EX MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/INTEL IXP2000 ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/INTEL IXDP2850 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/INTEL IXP23XX ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/INTEL XSC3 (MANZANO) ARM CORE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/LOGICPD PXA270 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/MAGICIAN MACHINE SUPPORT
-P:	Philipp Zabel
-M:	philipp.zabel@gmail.com
+M:	Philipp Zabel <philipp.zabel@gmail.com>
 S:	Maintained
 
 ARM/MIOA701 MACHINE SUPPORT
-P:	Robert Jarzmik
-M:	robert.jarzmik@free.fr
+M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 F:	arch/arm/mach-pxa/mioa701.c
 S:	Maintained
 
 ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
-P:	Michael Petchkovsky
-M:	mkpetch@internode.on.net
+M:	Michael Petchkovsky <mkpetch@internode.on.net>
 S:	Maintained
 
 ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
-P:	Nelson Castillo
-M:	arhuaco@freaks-unidos.net
+M:	Nelson Castillo <arhuaco@freaks-unidos.net>
 L:	openmoko-kernel@lists.openmoko.org (subscribers-only)
 W:	http://wiki.openmoko.org/wiki/Neo_FreeRunner
 S:	Supported
 
 ARM/TOSA MACHINE SUPPORT
-P:	Dmitry Eremin-Solenikov
-M:	dbaryshkov@gmail.com
-P:	Dirk Opfer
-M:	dirk@opfer-online.de
+M:	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M:	Dirk Opfer <dirk@opfer-online.de>
 S:	Maintained
 
 ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
-P:	Marek Vasut
-M:	marek.vasut@gmail.com
+M:	Marek Vasut <marek.vasut@gmail.com>
 W:	http://hackndev.com
 S:	Maintained
 
 ARM/PALM TREO 680 SUPPORT
-P:	Tomas Cech
-M:	sleep_walker@suse.cz
+M:	Tomas Cech <sleep_walker@suse.cz>
 W:	http://hackndev.com
 S:	Maintained
 
 ARM/PALMZ72 SUPPORT
-P:	Sergey Lapin
-M:	slapin@ossfans.org
+M:	Sergey Lapin <slapin@ossfans.org>
 W:	http://hackndev.com
 S:	Maintained
 
 ARM/PLEB SUPPORT
-P:	Peter Chubb
-M:	pleb@gelato.unsw.edu.au
+M:	Peter Chubb <pleb@gelato.unsw.edu.au>
 W:	http://www.disy.cse.unsw.edu.au/Hardware/PLEB
 S:	Maintained
 
 ARM/PT DIGITAL BOARD PORT
-P:	Stefan Eletzhofer
-M:	stefan.eletzhofer@eletztrick.de
+M:	Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 
 ARM/RADISYS ENP2611 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/RISCPC ARCHITECTURE
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
@@ -862,63 +752,86 @@ F:	drivers/net/arm/ether*
 F:	drivers/scsi/arm/
 
 ARM/SHARK MACHINE SUPPORT
-P:	Alexander Schulz
-M:	alex@shark-linux.de
+M:	Alexander Schulz <alex@shark-linux.de>
 W:	http://www.shark-linux.de/shark.html
 S:	Maintained
 
+ARM/SAMSUNG ARM ARCHITECTURES
+M:	Ben Dooks <ben-linux@fluff.org>
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/plat-s3c/
+F:	arch/arm/plat-s3c24xx/
+
 ARM/S3C2410 ARM ARCHITECTURE
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
+F:	arch/arm/mach-s3c2410/
 
 ARM/S3C2440 ARM ARCHITECTURE
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c2440/
+
+ARM/S3C2442 ARM ARCHITECTURE
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
+F:	arch/arm/mach-s3c2442/
+
+ARM/S3C2443 ARM ARCHITECTURE
+M:	Ben Dooks <ben-linux@fluff.org>
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c2443/
+
+ARM/S3C6400 ARM ARCHITECTURE
+M:	Ben Dooks <ben-linux@fluff.org>
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c6400/
+
+ARM/S3C6410 ARM ARCHITECTURE
+M:	Ben Dooks <ben-linux@fluff.org>
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c6410/
 
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/THECUS N2100 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/NUVOTON W90X900 ARM ARCHITECTURE
-P:	Wan ZongShun
-M:	mcuos.com@gmail.com
+M:	Wan ZongShun <mcuos.com@gmail.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://www.mcuos.com
 S:	Maintained
 
 ARM/VFP SUPPORT
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	arch/arm/vfp/
 
-ARPD SUPPORT
-P:	Jonathan Layes
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	net/ipv4/arp.c
-
 ASUS ACPI EXTRAS DRIVER
-P:	Corentin Chary
-M:	corentincj@iksaif.net
-P:	Karol Kozimor
-M:	sziwan@users.sourceforge.net
+M:	Corentin Chary <corentincj@iksaif.net>
+M:	Karol Kozimor <sziwan@users.sourceforge.net>
 L:	acpi4asus-user@lists.sourceforge.net
 W:	http://acpi4asus.sf.net
 S:	Maintained
@@ -926,25 +839,21 @@ F:	arch/x86/kernel/acpi/boot.c
 F:	drivers/platform/x86/asus_acpi.c
 
 ASUS ASB100 HARDWARE MONITOR DRIVER
-P:	Mark M. Hoffman
-M:	mhoffman@lightlink.com
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/asb100.c
 
 ASUS LAPTOP EXTRAS DRIVER
-P:	Corentin Chary
-M:	corentincj@iksaif.net
+M:	Corentin Chary <corentincj@iksaif.net>
 L:	acpi4asus-user@lists.sourceforge.net
 W:	http://acpi4asus.sf.net
 S:	Maintained
 F:	drivers/platform/x86/asus-laptop.c
 
 ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
-P:	Dan Williams
-M:	dan.j.williams@intel.com
-P:	Maciej Sosnowski
-M:	maciej.sosnowski@intel.com
+M:	Dan Williams <dan.j.williams@intel.com>
+M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
 W:	http://sourceforge.net/projects/xscaleiop
 S:	Supported
 F:	Documentation/crypto/async-tx-api.txt
@@ -954,64 +863,49 @@ F:	include/linux/dmaengine.h
 F:	include/linux/async_tx.h
 
 ATA OVER ETHERNET (AOE) DRIVER
-P:	Ed L. Cashin
-M:	ecashin@coraid.com
+M:	"Ed L. Cashin" <ecashin@coraid.com>
 W:	http://www.coraid.com/support/linux
 S:	Supported
 F:	Documentation/aoe/
 F:	drivers/block/aoe/
 
 ATHEROS ATH5K WIRELESS DRIVER
-P:	Jiri Slaby
-M:	jirislaby@gmail.com
-P:	Nick Kossifidis
-M:	mickflemm@gmail.com
-P:	Luis R. Rodriguez
-M:	lrodriguez@atheros.com
-P:	Bob Copeland
-M:	me@bobcopeland.com
+M:	Jiri Slaby <jirislaby@gmail.com>
+M:	Nick Kossifidis <mickflemm@gmail.com>
+M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
+M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath5k-devel@lists.ath5k.org
 S:	Maintained
 F:	drivers/net/wireless/ath/ath5k/
 
 ATHEROS ATH9K WIRELESS DRIVER
-P:	Luis R. Rodriguez
-M:	lrodriguez@atheros.com
-P:	Jouni Malinen
-M:	jmalinen@atheros.com
-P:	Sujith Manoharan
-M:	Sujith.Manoharan@atheros.com
-P:	Vasanthakumar Thiagarajan
-M:	vasanth@atheros.com
-P:	Senthil Balasubramanian
-M:	senthilkumar@atheros.com
+M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
+M:	Jouni Malinen <jmalinen@atheros.com>
+M:	Sujith Manoharan <Sujith.Manoharan@atheros.com>
+M:	Vasanthakumar Thiagarajan <vasanth@atheros.com>
+M:	Senthil Balasubramanian <senthilkumar@atheros.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath9k-devel@lists.ath9k.org
 S:	Supported
 F:	drivers/net/wireless/ath/ath9k/
 
 ATHEROS AR9170 WIRELESS DRIVER
-P:	Christian Lamparter
-M:	chunkeey@web.de
+M:	Christian Lamparter <chunkeey@web.de>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/ar9170
 S:	Maintained
 F:	drivers/net/wireless/ath/ar9170/
 
 ATI_REMOTE2 DRIVER
-P:	Ville Syrjala
-M:	syrjala@sci.fi
+M:	Ville Syrjala <syrjala@sci.fi>
 S:	Maintained
 F:	drivers/input/misc/ati_remote2.c
 
 ATLX ETHERNET DRIVERS
-P:	Jay Cliburn
-M:	jcliburn@gmail.com
-P:	Chris Snook
-M:	csnook@redhat.com
-P:	Jie Yang
-M:	jie.yang@atheros.com
+M:	Jay Cliburn <jcliburn@gmail.com>
+M:	Chris Snook <chris.snook@gmail.com>
+M:	Jie Yang <jie.yang@atheros.com>
 L:	atl1-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
@@ -1019,8 +913,7 @@ S:	Maintained
 F:	drivers/net/atlx/
 
 ATM
-P:	Chas Williams
-M:	chas@cmf.nrl.navy.mil
+M:	Chas Williams <chas@cmf.nrl.navy.mil>
 L:	linux-atm-general@lists.sourceforge.net (subscribers-only)
 L:	netdev@vger.kernel.org
 W:	http://linux-atm.sourceforge.net
@@ -1029,8 +922,7 @@ F:	drivers/atm/
 F:	include/linux/atm*
 
 ATMEL AT91 MCI DRIVER
-P:	Nicolas Ferre
-M:	nicolas.ferre@atmel.com
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://www.atmel.com/products/AT91/
 W:	http://www.at91.com/
@@ -1038,49 +930,42 @@ S:	Maintained
 F:	drivers/mmc/host/at91_mci.c
 
 ATMEL AT91 / AT32 MCI DRIVER
-P:	Nicolas Ferre
-M:	nicolas.ferre@atmel.com
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h
 
 ATMEL AT91 / AT32 SERIAL DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	drivers/serial/atmel_serial.c
 
 ATMEL LCDFB DRIVER
-P:	Nicolas Ferre
-M:	nicolas.ferre@atmel.com
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
 
 ATMEL MACB ETHERNET DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	drivers/net/macb.*
 
 ATMEL SPI DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	drivers/spi/atmel_spi.*
 
 ATMEL USBA UDC DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 L:	kernel@avr32linux.org
 W:	http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
 S:	Supported
 F:	drivers/usb/gadget/atmel_usba_udc.*
 
 ATMEL WIRELESS DRIVER
-P:	Simon Kelley
-M:	simon@thekelleys.org.uk
+M:	Simon Kelley <simon@thekelleys.org.uk>
 L:	linux-wireless@vger.kernel.org
 W:	http://www.thekelleys.org.uk/atmel
 W:	http://atmelwlandriver.sourceforge.net/
@@ -1088,10 +973,8 @@ S:	Maintained
 F:	drivers/net/wireless/atmel*
 
 AUDIT SUBSYSTEM
-P:	Al Viro
-M:	viro@zeniv.linux.org.uk
-P:	Eric Paris
-M:	eparis@redhat.com
+M:	Al Viro <viro@zeniv.linux.org.uk>
+M:	Eric Paris <eparis@redhat.com>
 L:	linux-audit@redhat.com (subscribers-only)
 W:	http://people.redhat.com/sgrubb/audit/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git
@@ -1100,8 +983,7 @@ F:	include/linux/audit.h
 F:	kernel/audit*
 
 AUXILIARY DISPLAY DRIVERS
-P:	Miguel Ojeda Sandonis
-M:	miguel.ojeda.sandonis@gmail.com
+M:	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -1109,8 +991,7 @@ F:	drivers/auxdisplay/
 F:	include/linux/cfag12864b.h
 
 AVR32 ARCHITECTURE
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 W:	http://www.atmel.com/products/AVR32/
 W:	http://avr32linux.org/
 W:	http://avrfreaks.net/
@@ -1118,14 +999,12 @@ S:	Supported
 F:	arch/avr32/
 
 AVR32/AT32AP MACHINE SUPPORT
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	arch/avr32/mach-at32ap/
 
 AX.25 NETWORK LAYER
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
@@ -1134,128 +1013,110 @@ F:	include/net/ax25.h
 F:	net/ax25/
 
 B43 WIRELESS DRIVER
-P:	Michael Buesch
-M:	mb@bu3sch.de
-P:	Stefano Brivio
-M:	stefano.brivio@polimi.it
+M:	Michael Buesch <mb@bu3sch.de>
+M:	Stefano Brivio <stefano.brivio@polimi.it>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/users/Drivers/b43
 S:	Maintained
 F:	drivers/net/wireless/b43/
 
 B43LEGACY WIRELESS DRIVER
-P:	Larry Finger
-M:	Larry.Finger@lwfinger.net
-P:	Stefano Brivio
-M:	stefano.brivio@polimi.it
+M:	Larry Finger <Larry.Finger@lwfinger.net>
+M:	Stefano Brivio <stefano.brivio@polimi.it>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/users/Drivers/b43
 S:	Maintained
 F:	drivers/net/wireless/b43legacy/
 
 BACKLIGHT CLASS/SUBSYSTEM
-P:	Richard Purdie
-M:	rpurdie@rpsys.net
+M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 F:	drivers/video/backlight/
 F:	include/linux/backlight.h
 
 BAYCOM/HDLCDRV DRIVERS FOR AX.25
-P:	Thomas Sailer
-M:	t.sailer@alumni.ethz.ch
+M:	Thomas Sailer <t.sailer@alumni.ethz.ch>
 L:	linux-hams@vger.kernel.org
 W:	http://www.baycom.org/~tom/ham/ham.html
 S:	Maintained
 F:	drivers/net/hamradio/baycom*
 
 BEFS FILE SYSTEM
-P:	Sergey S. Kostyliov
-M:	rathamahata@php4.ru
+M:	"Sergey S. Kostyliov" <rathamahata@php4.ru>
 S:	Maintained
 F:	Documentation/filesystems/befs.txt
 F:	fs/befs/
 
 BFS FILE SYSTEM
-P:	Tigran A. Aivazian
-M:	tigran@aivazian.fsnet.co.uk
+M:	"Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
 S:	Maintained
 F:	Documentation/filesystems/bfs.txt
 F:	fs/bfs/
 F:	include/linux/bfs_fs.h
 
 BLACKFIN ARCHITECTURE
-P:	Mike Frysinger
-M:	vapier@gentoo.org
+M:	Mike Frysinger <vapier@gentoo.org>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	arch/blackfin/
 
 BLACKFIN EMAC DRIVER
-P:	Michael Hennerich
-M:	michael.hennerich@analog.com
+M:	Michael Hennerich <michael.hennerich@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/net/bfin_mac.*
 
 BLACKFIN RTC DRIVER
-P:	Mike Frysinger
-M:	vapier.adi@gmail.com
+M:	Mike Frysinger <vapier.adi@gmail.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/rtc/rtc-bfin.c
 
 BLACKFIN SERIAL DRIVER
-P:	Sonic Zhang
-M:	sonic.zhang@analog.com
+M:	Sonic Zhang <sonic.zhang@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/serial/bfin_5xx.c
 
 BLACKFIN WATCHDOG DRIVER
-P:	Mike Frysinger
-M:	vapier.adi@gmail.com
+M:	Mike Frysinger <vapier.adi@gmail.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/watchdog/bfin_wdt.c
 
 BLACKFIN I2C TWI DRIVER
-P:	Sonic Zhang
-M:	sonic.zhang@analog.com
+M:	Sonic Zhang <sonic.zhang@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org/
 S:	Supported
 F:	drivers/i2c/busses/i2c-bfin-twi.c
 
 BLOCK LAYER
-P:	Jens Axboe
-M:	axboe@kernel.dk
+M:	Jens Axboe <axboe@kernel.dk>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
 S:	Maintained
 F:	block/
 
 BLOCK2MTD DRIVER
-P:	Joern Engel
-M:	joern@lazybastard.org
+M:	Joern Engel <joern@lazybastard.org>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/devices/block2mtd.c
 
 BLUETOOTH DRIVERS
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
+M:	Marcel Holtmann <marcel@holtmann.org>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
 S:	Maintained
 F:	drivers/bluetooth/
 
 BLUETOOTH SUBSYSTEM
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
+M:	Marcel Holtmann <marcel@holtmann.org>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
@@ -1264,8 +1125,7 @@ F:	net/bluetooth/
 F:	include/net/bluetooth/
 
 BONDING DRIVER
-P:	Jay Vosburgh
-M:	fubar@us.ibm.com
+M:	Jay Vosburgh <fubar@us.ibm.com>
 L:	bonding-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
@@ -1273,54 +1133,46 @@ F:	drivers/net/bonding/
 F:	include/linux/if_bonding.h
 
 BROADCOM B44 10/100 ETHERNET DRIVER
-P:	Gary Zambrano
-M:	zambrano@broadcom.com
+M:	Gary Zambrano <zambrano@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/b44.*
 
 BROADCOM BNX2 GIGABIT ETHERNET DRIVER
-P:	Michael Chan
-M:	mchan@broadcom.com
+M:	Michael Chan <mchan@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/bnx2.*
 F:	drivers/net/bnx2_*
 
 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-P:	Eilon Greenstein
-M:	eilong@broadcom.com
+M:	Eilon Greenstein <eilong@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/bnx2x*
 
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
-P:	Matt Carlson
-M:	mcarlson@broadcom.com
-P:	Michael Chan
-M:	mchan@broadcom.com
+M:	Matt Carlson <mcarlson@broadcom.com>
+M:	Michael Chan <mchan@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/tg3.*
 
 BSG (block layer generic sg v4 driver)
-P:	FUJITA Tomonori
-M:	fujita.tomonori@lab.ntt.co.jp
+M:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	block/bsg.c
 F:	include/linux/bsg.h
 
 BT8XXGPIO DRIVER
-P:	Michael Buesch
-M:	mb@bu3sch.de
+M:	Michael Buesch <mb@bu3sch.de>
 W:	http://bu3sch.de/btgpio.php
 S:	Maintained
 F:	drivers/gpio/bt8xxgpio.c
 
 BTRFS FILE SYSTEM
-P:	Chris Mason
-M:	chris.mason@oracle.com
+M:	Chris Mason <chris.mason@oracle.com>
 L:	linux-btrfs@vger.kernel.org
 W:	http://btrfs.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
@@ -1329,8 +1181,7 @@ F:	Documentation/filesystems/btrfs.txt
 F:	fs/btrfs/
 
 BTTV VIDEO4LINUX DRIVER
-P:	Mauro Carvalho Chehab
-M:	mchehab@infradead.org
+M:	Mauro Carvalho Chehab <mchehab@infradead.org>
 L:	linux-media@vger.kernel.org
 W:	http://linuxtv.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -1339,16 +1190,14 @@ F:	Documentation/video4linux/bttv/
 F:	drivers/media/video/bt8xx/bttv*
 
 CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
-P:	David Howells
-M:	dhowells@redhat.com
+M:	David Howells <dhowells@redhat.com>
 L:	linux-cachefs@redhat.com
 S:	Supported
 F:	Documentation/filesystems/caching/cachefiles.txt
 F:	fs/cachefiles/
 
 CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
-P:	Jonathan Corbet
-M:	corbet@lwn.net
+M:	Jonathan Corbet <corbet@lwn.net>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
@@ -1356,10 +1205,8 @@ F:	Documentation/video4linux/cafe_ccic
 F:	drivers/media/video/cafe_ccic*
 
 CALGARY x86-64 IOMMU
-P:	Muli Ben-Yehuda
-M:	muli@il.ibm.com
-P:	Jon D. Mason
-M:	jdmason@kudzu.us
+M:	Muli Ben-Yehuda <muli@il.ibm.com>
+M:	"Jon D. Mason" <jdmason@kudzu.us>
 L:	discuss@x86-64.org
 S:	Maintained
 F:	arch/x86/kernel/pci-calgary_64.c
@@ -1368,10 +1215,8 @@ F:	arch/x86/include/asm/calgary.h
 F:	arch/x86/include/asm/tce.h
 
 CAN NETWORK LAYER
-P:	Urs Thuermann
-M:	urs.thuermann@volkswagen.de
-P:	Oliver Hartkopp
-M:	oliver.hartkopp@volkswagen.de
+M:	Urs Thuermann <urs.thuermann@volkswagen.de>
+M:	Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
 L:	socketcan-core@lists.berlios.de (subscribers-only)
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
@@ -1380,15 +1225,13 @@ F:	include/linux/can/
 F:	include/linux/can.h
 
 CAN NETWORK DRIVERS
-P:	Wolfgang Grandegger
-M:	wg@grandegger.com
+M:	Wolfgang Grandegger <wg@grandegger.com>
 L:	socketcan-core@lists.berlios.de (subscribers-only)
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
 
 CELL BROADBAND ENGINE ARCHITECTURE
-P:	Arnd Bergmann
-M:	arnd@arndb.de
+M:	Arnd Bergmann <arnd@arndb.de>
 L:	linuxppc-dev@ozlabs.org
 L:	cbe-oss-dev@ozlabs.org
 W:	http://www.ibm.com/developerworks/power/cell/
@@ -1399,8 +1242,7 @@ F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
 
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
-P:	David Vrabel
-M:	david.vrabel@csr.com
+M:	David Vrabel <david.vrabel@csr.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	Documentation/usb/WUSB-Design-overview.txt
@@ -1409,8 +1251,7 @@ F:	drivers/usb/wusbcore/
 F:	include/linux/usb/wusb*
 
 CFAG12864B LCD DRIVER
-P:	Miguel Ojeda Sandonis
-M:	miguel.ojeda.sandonis@gmail.com
+M:	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -1418,8 +1259,7 @@ F:	drivers/auxdisplay/cfag12864b.c
 F:	include/linux/cfag12864b.h
 
 CFAG12864BFB LCD FRAMEBUFFER DRIVER
-P:	Miguel Ojeda Sandonis
-M:	miguel.ojeda.sandonis@gmail.com
+M:	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -1427,8 +1267,7 @@ F:	drivers/auxdisplay/cfag12864bfb.c
 F:	include/linux/cfag12864b.h
 
 CFG80211 and NL80211
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	include/linux/nl80211.h
@@ -1437,66 +1276,47 @@ F:	net/wireless/*
 X:	net/wireless/wext*
 
 CHECKPATCH
-P:	Andy Whitcroft
-M:	apw@canonical.com
+M:	Andy Whitcroft <apw@canonical.com>
 S:	Supported
 F:	scripts/checkpatch.pl
 
 CISCO 10G ETHERNET DRIVER
-P:	Scott Feldman
-M:	scofeldm@cisco.com
-P:	Joe Eykholt
-M:	jeykholt@cisco.com
+M:	Scott Feldman <scofeldm@cisco.com>
+M:	Joe Eykholt <jeykholt@cisco.com>
 S:	Supported
 F:	drivers/net/enic/
 
 CIRRUS LOGIC EP93XX ETHERNET DRIVER
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/arm/ep93xx_eth.c
 
 CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/host/ohci-ep93xx.c
 
 CIRRUS LOGIC CS4270 SOUND DRIVER
-P:	Timur Tabi
-M:	timur@freescale.com
+M:	Timur Tabi <timur@freescale.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/codecs/cs4270*
 
-CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER
-P:	Cirrus Logic Corporation (kernel 2.2 driver)
-M:	Cirrus Logic Corporation, Thomas Woller <twoller@crystal.cirrus.com>
-P:	Nils Faerber (port to kernel 2.4)
-M:	Nils Faerber <nils@kernelconcepts.de>
-S:	Maintained
-F:	Documentation/input/cs461x.txt
-F:	sound/pci/cs46xx/
-
 CLK API
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 F:	include/linux/clk.h
 
 CISCO FCOE HBA DRIVER
-P:	Abhijeet Joglekar
-M:	abjoglek@cisco.com
-P:	Joe Eykholt
-M:	jeykholt@cisco.com
+M:	Abhijeet Joglekar <abjoglek@cisco.com>
+M:	Joe Eykholt <jeykholt@cisco.com>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	drivers/scsi/fnic/
 
 CODA FILE SYSTEM
-P:	Jan Harkes
-M:	jaharkes@cs.cmu.edu
+M:	Jan Harkes <jaharkes@cs.cmu.edu>
 M:	coda@cs.cmu.edu
 L:	codalist@coda.cs.cmu.edu
 W:	http://www.coda.cs.cmu.edu/
@@ -1506,8 +1326,7 @@ F:	fs/coda/
 F:	include/linux/coda*.h
 
 COMMON INTERNET FILE SYSTEM (CIFS)
-P:	Steve French
-M:	sfrench@samba.org
+M:	Steve French <sfrench@samba.org>
 L:	linux-cifs-client@lists.samba.org
 L:	samba-technical@lists.samba.org
 W:	http://linux-cifs.samba.org/
@@ -1517,63 +1336,57 @@ F:	Documentation/filesystems/cifs.txt
 F:	fs/cifs/
 
 COMPACTPCI HOTPLUG CORE
-P:	Scott Murray
-M:	scottm@somanetworks.com
-M:	scott@spiteful.org
+M:	Scott Murray <scott@spiteful.org>
 L:	linux-pci@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/pci/hotplug/cpci_hotplug*
 
 COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER
-P:	Scott Murray
-M:	scottm@somanetworks.com
-M:	scott@spiteful.org
+M:	Scott Murray <scott@spiteful.org>
 L:	linux-pci@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/pci/hotplug/cpcihp_zt5550.*
 
 COMPACTPCI HOTPLUG GENERIC DRIVER
-P:	Scott Murray
-M:	scottm@somanetworks.com
-M:	scott@spiteful.org
+M:	Scott Murray <scott@spiteful.org>
 L:	linux-pci@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/pci/hotplug/cpcihp_generic.c
 
 COMPAL LAPTOP SUPPORT
-P:	Cezary Jackiewicz
-M:	cezary.jackiewicz@gmail.com
+M:	Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
 S:	Maintained
 F:	drivers/platform/x86/compal-laptop.c
 
 COMPUTONE INTELLIPORT MULTIPORT CARD
-P:	Michael H. Warfield
-M:	mhw@wittsend.com
+M:	"Michael H. Warfield" <mhw@wittsend.com>
 W:	http://www.wittsend.com/computone.html
 S:	Maintained
 F:	Documentation/serial/computone.txt
 F:	drivers/char/ip2/
 
 CONEXANT ACCESSRUNNER USB DRIVER
-P:	Simon Arlott
-M:	cxacru@fire.lp0.eu
+M:	Simon Arlott <cxacru@fire.lp0.eu>
 L:	accessrunner-general@lists.sourceforge.net
 W:	http://accessrunner.sourceforge.net/
 S:	Maintained
 F:	drivers/usb/atm/cxacru.c
 
 CONFIGFS
-P:	Joel Becker
-M:	joel.becker@oracle.com
+M:	Joel Becker <joel.becker@oracle.com>
 S:	Supported
 F:	fs/configfs/
 F:	include/linux/configfs.h
 
+CONNECTOR
+M:	Evgeniy Polyakov <zbr@ioremap.net>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/connector/
+
 CONTROL GROUPS (CGROUPS)
-P:	Paul Menage
-M:	menage@google.com
-P:	Li Zefan
-M:	lizf@cn.fujitsu.com
+M:	Paul Menage <menage@google.com>
+M:	Li Zefan <lizf@cn.fujitsu.com>
 L:	containers@lists.linux-foundation.org
 S:	Maintained
 F:	include/linux/cgroup*
@@ -1581,30 +1394,26 @@ F:	kernel/cgroup*
 F:	mm/*cgroup*
 
 CORETEMP HARDWARE MONITORING DRIVER
-P:	Rudolf Marek
-M:	r.marek@assembler.cz
+M:	Rudolf Marek <r.marek@assembler.cz>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/coretemp
 F:	drivers/hwmon/coretemp.c
 
 COSA/SRP SYNC SERIAL DRIVER
-P:	Jan "Yenya" Kasprzak
-M:	kas@fi.muni.cz
+M:	Jan "Yenya" Kasprzak <kas@fi.muni.cz>
 W:	http://www.fi.muni.cz/~kas/cosa/
 S:	Maintained
 F:	drivers/net/wan/cosa*
 
 CPMAC ETHERNET DRIVER
-P:	Florian Fainelli
-M:	florian@openwrt.org
+M:	Florian Fainelli <florian@openwrt.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/cpmac.c
 
 CPU FREQUENCY DRIVERS
-P:	Dave Jones
-M:	davej@redhat.com
+M:	Dave Jones <davej@redhat.com>
 L:	cpufreq@vger.kernel.org
 W:	http://www.codemonkey.org.uk/projects/cpufreq/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
@@ -1614,15 +1423,13 @@ F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
 
 CPUID/MSR DRIVER
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	"H. Peter Anvin" <hpa@zytor.com>
 S:	Maintained
 F:	arch/x86/kernel/cpuid.c
 F:	arch/x86/kernel/msr.c
 
 CPUSETS
-P:	Paul Menage
-M:	menage@google.com
+M:	Paul Menage <menage@google.com>
 W:	http://www.bullopensource.org/cpuset/
 W:	http://oss.sgi.com/projects/cpusets/
 S:	Supported
@@ -1637,20 +1444,16 @@ F:	Documentation/filesystems/cramfs.txt
 F:	fs/cramfs/
 
 CRIS PORT
-P:	Mikael Starvik
-M:	starvik@axis.com
-P:	Jesper Nilsson
-M:	jesper.nilsson@axis.com
+M:	Mikael Starvik <starvik@axis.com>
+M:	Jesper Nilsson <jesper.nilsson@axis.com>
 L:	linux-cris-kernel@axis.com
 W:	http://developer.axis.com
 S:	Maintained
 F:	arch/cris/
 
 CRYPTO API
-P:	Herbert Xu
-M:	herbert@gondor.apana.org.au
-P:	David S. Miller
-M:	davem@davemloft.net
+M:	Herbert Xu <herbert@gondor.apana.org.au>
+M:	"David S. Miller" <davem@davemloft.net>
 L:	linux-crypto@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6.git
 S:	Maintained
@@ -1661,58 +1464,50 @@ F:	drivers/crypto/
 F:	include/crypto/
 
 CRYPTOGRAPHIC RANDOM NUMBER GENERATOR
-P:	Neil Horman
-M:	nhorman@tuxdriver.com
+M:	Neil Horman <nhorman@tuxdriver.com>
 L:	linux-crypto@vger.kernel.org
 S:	Maintained
 
 CS5535 Audio ALSA driver
-P:	Jaya Kumar
-M:	jayakumar.alsa@gmail.com
+M:	Jaya Kumar <jayakumar.alsa@gmail.com>
 S:	Maintained
 F:	sound/pci/cs5535audio/
 
 CX18 VIDEO4LINUX DRIVER
-P:	Hans Verkuil
-M:	hverkuil@xs4all.nl
-P:	Andy Walls
-M:	awalls@radix.net
+M:	Hans Verkuil <hverkuil@xs4all.nl>
+M:	Andy Walls <awalls@radix.net>
 L:	ivtv-devel@ivtvdriver.org
-L:	ivtv-users@ivtvdriver.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://linuxtv.org
+W:	http://www.ivtvdriver.org/index.php/Cx18
 S:	Maintained
 F:	Documentation/video4linux/cx18.txt
 F:	drivers/media/video/cx18/
 
 CXGB3 ETHERNET DRIVER (CXGB3)
-P:	Divy Le Ray
-M:	divy@chelsio.com
+M:	Divy Le Ray <divy@chelsio.com>
 L:	netdev@vger.kernel.org
 W:	http://www.chelsio.com
 S:	Supported
 F:	drivers/net/cxgb3/
 
 CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
-P:	Steve Wise
-M:	swise@chelsio.com
+M:	Steve Wise <swise@chelsio.com>
 L:	general@lists.openfabrics.org
 W:	http://www.openfabrics.org
 S:	Supported
 F:	drivers/infiniband/hw/cxgb3/
 
 CYBERPRO FB DRIVER
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	drivers/video/cyber2000fb.*
 
 CYCLADES 2X SYNC CARD DRIVER
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 W:	http://oops.ghostprotocols.net:81/blog
 S:	Maintained
 F:	drivers/net/wan/cycx*
@@ -1729,8 +1524,7 @@ S:	Orphan
 F:	drivers/net/wan/pc300*
 
 DAMA SLAVE for AX.25
-P:	Joerg Reuter
-M:	jreuter@yaina.de
+M:	Joerg Reuter <jreuter@yaina.de>
 W:	http://yaina.de/jreuter/
 W:	http://www.qsl.net/dl1bke/
 L:	linux-hams@vger.kernel.org
@@ -1744,29 +1538,23 @@ F:	net/ax25/ax25_timer.c
 F:	net/ax25/sysctl_net_ax25.c
 
 DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER
-P:	Tobias Ringstrom
-M:	tori@unhappy.mine.nu
+M:	Tobias Ringstrom <tori@unhappy.mine.nu>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/dmfe.txt
 F:	drivers/net/tulip/dmfe.c
 
 DC390/AM53C974 SCSI driver
-P:	Kurt Garloff
-M:	garloff@suse.de
+M:	Kurt Garloff <garloff@suse.de>
 W:	http://www.garloff.de/kurt/linux/dc390/
-P:	Guennadi Liakhovetski
-M:	g.liakhovetski@gmx.de
+M:	Guennadi Liakhovetski <g.liakhovetski@gmx.de>
 S:	Maintained
 F:	drivers/scsi/tmscsim.*
 
 DC395x SCSI driver
-P:	Oliver Neukum
-M:	oliver@neukum.name
-P:	Ali Akcaagac
-M:	aliakc@web.de
-P:	Jamie Lenehan
-M:	lenehan@twibble.org
+M:	Oliver Neukum <oliver@neukum.name>
+M:	Ali Akcaagac <aliakc@web.de>
+M:	Jamie Lenehan <lenehan@twibble.org>
 W:	http://twibble.org/dist/dc395x/
 L:	dc395x@twibble.org
 L:	http://lists.twibble.org/mailman/listinfo/dc395x/
@@ -1775,8 +1563,7 @@ F:	Documentation/scsi/dc395x.txt
 F:	drivers/scsi/dc395x.*
 
 DCCP PROTOCOL
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:	dccp@vger.kernel.org
 W:	http://linux-net.osdl.org/index.php/DCCP
 S:	Maintained
@@ -1785,8 +1572,7 @@ F:	include/linux/tfrc.h
 F:	net/dccp/
 
 DECnet NETWORK LAYER
-P:	Christine Caulfield
-M:	christine.caulfield@googlemail.com
+M:	Christine Caulfield <christine.caulfield@googlemail.com>
 W:	http://linux-decnet.sourceforge.net
 L:	linux-decnet-user@lists.sourceforge.net
 S:	Maintained
@@ -1794,40 +1580,34 @@ F:	Documentation/networking/decnet.txt
 F:	net/decnet/
 
 DEFXX FDDI NETWORK DRIVER
-P:	Maciej W. Rozycki
-M:	macro@linux-mips.org
+M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/net/defxx.*
 
 DELL LAPTOP DRIVER
-P:	Matthew Garrett
-M:	mjg59@srcf.ucam.org
+M:	Matthew Garrett <mjg59@srcf.ucam.org>
 S:	Maintained
 F:	drivers/platform/x86/dell-laptop.c
 
 DELL LAPTOP SMM DRIVER
-P:	Massimo Dal Zotto
-M:	dz@debian.org
+M:	Massimo Dal Zotto <dz@debian.org>
 W:	http://www.debian.org/~dz/i8k/
 S:	Maintained
 F:	drivers/char/i8k.c
 F:	include/linux/i8k.h
 
 DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
-P:	Doug Warzecha
-M:	Douglas_Warzecha@dell.com
+M:	Doug Warzecha <Douglas_Warzecha@dell.com>
 S:	Maintained
 F:	Documentation/dcdbas.txt
 F:	drivers/firmware/dcdbas.*
 
 DELL WMI EXTRAS DRIVER
-P:	Matthew Garrett
-M:	mjg59@srcf.ucam.org
+M:	Matthew Garrett <mjg59@srcf.ucam.org>
 S:	Maintained
 
 DEVICE NUMBER REGISTRY
-P:	Torben Mathiasen
-M:	device@lanana.org
+M:	Torben Mathiasen <device@lanana.org>
 W:	http://lanana.org/docs/device-list/index.html
 S:	Maintained
 
@@ -1842,8 +1622,7 @@ F:	include/linux/device-mapper.h
 F:	include/linux/dm-*.h
 
 DIGI INTL. EPCA DRIVER
-P:	Digi International, Inc
-M:	Eng.Linux@digi.com
+M:	"Digi International, Inc" <Eng.Linux@digi.com>
 L:	Eng.Linux@digi.com
 W:	http://www.digi.com
 S:	Orphan
@@ -1852,34 +1631,29 @@ F:	drivers/char/epca*
 F:	drivers/char/digi*
 
 DIRECTORY NOTIFICATION (DNOTIFY)
-P:	Eric Paris
-M:	eparis@parisplace.org
+M:	Eric Paris <eparis@parisplace.org>
 S:	Maintained
 F:	Documentation/filesystems/dnotify.txt
 F:	fs/notify/dnotify/
 F:	include/linux/dnotify.h
 
 DISK GEOMETRY AND PARTITION HANDLING
-P:	Andries Brouwer
-M:	aeb@cwi.nl
+M:	Andries Brouwer <aeb@cwi.nl>
 W:	http://www.win.tue.nl/~aeb/linux/Large-Disk.html
 W:	http://www.win.tue.nl/~aeb/linux/zip/zip-1.html
 W:	http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
 S:	Maintained
 
 DISKQUOTA
-P:	Jan Kara
-M:	jack@suse.cz
+M:	Jan Kara <jack@suse.cz>
 S:	Maintained
 F:	Documentation/filesystems/quota.txt
 F:	fs/quota/
 F:	include/linux/quota*.h
 
 DISTRIBUTED LOCK MANAGER (DLM)
-P:	Christine Caulfield
-M:	ccaulfie@redhat.com
-P:	David Teigland
-M:	teigland@redhat.com
+M:	Christine Caulfield <ccaulfie@redhat.com>
+M:	David Teigland <teigland@redhat.com>
 L:	cluster-devel@redhat.com
 W:	http://sources.redhat.com/cluster/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm.git
@@ -1887,52 +1661,44 @@ S:	Supported
 F:	fs/dlm/
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-P:	Maciej Sosnowski
-M:	maciej.sosnowski@intel.com
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
+M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/
 F:	include/linux/dma*
 
 DME1737 HARDWARE MONITOR DRIVER
-P:	Juerg Haefliger
-M:	juergh@gmail.com
+M:	Juerg Haefliger <juergh@gmail.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/dme1737
 F:	drivers/hwmon/dme1737.c
 
 DOCBOOK FOR DOCUMENTATION
-P:	Randy Dunlap
-M:	rdunlap@xenotime.net
+M:	Randy Dunlap <rdunlap@xenotime.net>
 S:	Maintained
 
 DOCKING STATION DRIVER
-P:	Shaohua Li
-M:	shaohua.li@intel.com
+M:	Shaohua Li <shaohua.li@intel.com>
 L:	linux-acpi@vger.kernel.org
 S:	Supported
 F:	drivers/acpi/dock.c
 
 DOCUMENTATION
-P:	Randy Dunlap
-M:	rdunlap@xenotime.net
+M:	Randy Dunlap <rdunlap@xenotime.net>
 L:	linux-doc@vger.kernel.org
 S:	Maintained
 F:	Documentation/
 
 DOUBLETALK DRIVER
-P:	James R. Van Zandt
-M:	jrv@vanzandt.mv.com
+M:	"James R. Van Zandt" <jrv@vanzandt.mv.com>
 L:	blinux-list@redhat.com
 S:	Maintained
 F:	drivers/char/dtlk.c
 F:	include/linux/dtlk.h
 
 DPT_I2O SCSI RAID DRIVER
-P:	Adaptec OEM Raid Solutions
-M:	aacraid@adaptec.com
+M:	Adaptec OEM Raid Solutions <aacraid@adaptec.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.adaptec.com/
 S:	Maintained
@@ -1940,8 +1706,7 @@ F:	drivers/scsi/dpt*
 F:	drivers/scsi/dpt/
 
 DRIVER CORE, KOBJECTS, AND SYSFS
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
 F:	Documentation/kobject.txt
@@ -1951,52 +1716,45 @@ F:	include/linux/kobj*
 F:	lib/kobj*
 
 DRM DRIVERS
-P:	David Airlie
-M:	airlied@linux.ie
+M:	David Airlie <airlied@linux.ie>
 L:	dri-devel@lists.sourceforge.net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/gpu/drm/
 
 DSCC4 DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
+M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wan/dscc4.c
 
 DZ DECSTATION DZ11 SERIAL DRIVER
-P:	Maciej W. Rozycki
-M:	macro@linux-mips.org
+M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/serial/dz.*
 
 EATA-DMA SCSI DRIVER
-P:	Michael Neuffer
-M:	mike@i-Connect.Net
+M:	Michael Neuffer <mike@i-Connect.Net>
 L:	linux-eata@i-connect.net
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/eata*
 
 EATA ISA/EISA/PCI SCSI DRIVER
-P:	Dario Ballabio
-M:	ballabio_dario@emc.com
+M:	Dario Ballabio <ballabio_dario@emc.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/eata.c
 
 EATA-PIO SCSI DRIVER
-P:	Michael Neuffer
-M:	mike@i-Connect.Net
+M:	Michael Neuffer <mike@i-Connect.Net>
 L:	linux-eata@i-connect.net
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/eata_pio.*
 
 EBTABLES
-P:	Bart De Schuymer
-M:	bart.de.schuymer@pandora.be
+M:	Bart De Schuymer <bart.de.schuymer@pandora.be>
 L:	ebtables-user@lists.sourceforge.net
 L:	ebtables-devel@lists.sourceforge.net
 W:	http://ebtables.sourceforge.net/
@@ -2005,10 +1763,8 @@ F:	include/linux/netfilter_bridge/ebt_*.h
 F:	net/bridge/netfilter/ebt*.c
 
 ECRYPT FILE SYSTEM
-P:	Tyler Hicks
-M:	tyhicks@linux.vnet.ibm.com
-P:	Dustin Kirkland
-M:	kirkland@canonical.com
+M:	Tyler Hicks <tyhicks@linux.vnet.ibm.com>
+M:	Dustin Kirkland <kirkland@canonical.com>
 L:	ecryptfs-devel@lists.launchpad.net
 W:	https://launchpad.net/ecryptfs
 S:	Supported
@@ -2016,8 +1772,7 @@ F:	Documentation/filesystems/ecryptfs.txt
 F:	fs/ecryptfs/
 
 EDAC-CORE
-P:	Doug Thompson
-M:	dougthompson@xmission.com
+M:	Doug Thompson <dougthompson@xmission.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Supported
@@ -2026,94 +1781,80 @@ F:	drivers/edac/edac_*
 F:	include/linux/edac.h
 
 EDAC-AMD64
-P:	Doug Thompson
-M:	dougthompson@xmission.com
-P:	Borislav Petkov
-M:	borislav.petkov@amd.com
+M:	Doug Thompson <dougthompson@xmission.com>
+M:	Borislav Petkov <borislav.petkov@amd.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Supported
 F:	drivers/edac/amd64_edac*
 
 EDAC-E752X
-P:	Mark Gross
-M:	mark.gross@intel.com
-P:	Doug Thompson
-M:	dougthompson@xmission.com
+M:	Mark Gross <mark.gross@intel.com>
+M:	Doug Thompson <dougthompson@xmission.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e752x_edac.c
 
 EDAC-E7XXX
-P:	Doug Thompson
-M:	dougthompson@xmission.com
+M:	Doug Thompson <dougthompson@xmission.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e7xxx_edac.c
 
 EDAC-I82443BXGX
-P:	Tim Small
-M:	tim@buttersideup.com
+M:	Tim Small <tim@buttersideup.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82443bxgx_edac.c
 
 EDAC-I3000
-P:	Jason Uhlenkott
-M:	juhlenko@akamai.com
+M:	Jason Uhlenkott <juhlenko@akamai.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i3000_edac.c
 
 EDAC-I5000
-P:	Doug Thompson
-M:	dougthompson@xmission.com
+M:	Doug Thompson <dougthompson@xmission.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5000_edac.c
 
 EDAC-I5400
-P:	Mauro Carvalho Chehab
-M:	mchehab@redhat.com
+M:	Mauro Carvalho Chehab <mchehab@redhat.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5400_edac.c
 
 EDAC-I82975X
-P:	Ranganathan Desikan
-M:	rdesikan@jetzbroadband.com
-P:	Arvind R.
-M:	arvind@acarlab.com
+M:	Ranganathan Desikan <ravi@jetztechnologies.com>
+M:	"Arvind R." <arvind@jetztechnologies.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82975x_edac.c
 
 EDAC-PASEMI
-P:	Egor Martovetsky
-M:	egor@pasemi.com
+M:	Egor Martovetsky <egor@pasemi.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/pasemi_edac.c
 
 EDAC-R82600
-P:	Tim Small
-M:	tim@buttersideup.com
+M:	Tim Small <tim@buttersideup.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/r82600_edac.c
 
 EEEPC LAPTOP EXTRAS DRIVER
-P:	Corentin Chary
-M:	corentincj@iksaif.net
+M:	Corentin Chary <corentincj@iksaif.net>
 L:	acpi4asus-user@lists.sourceforge.net
 W:	http://acpi4asus.sf.net
 S:	Maintained
@@ -2125,66 +1866,54 @@ S:	Orphan
 F:	fs/efs/
 
 EHCA (IBM GX bus InfiniBand adapter) DRIVER
-P:	Hoang-Nam Nguyen
-M:	hnguyen@de.ibm.com
-P:	Christoph Raisch
-M:	raisch@de.ibm.com
+M:	Hoang-Nam Nguyen <hnguyen@de.ibm.com>
+M:	Christoph Raisch <raisch@de.ibm.com>
 L:	general@lists.openfabrics.org
 S:	Supported
 F:	drivers/infiniband/hw/ehca/
 
 EMBEDDED LINUX
-P:	Paul Gortmaker
-M:	paul.gortmaker@windriver.com
-P:	Matt Mackall
-M:	mpm@selenic.com
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	Paul Gortmaker <paul.gortmaker@windriver.com>
+M:	Matt Mackall <mpm@selenic.com>
+M:	David Woodhouse <dwmw2@infradead.org>
 L:	linux-embedded@vger.kernel.org
 S:	Maintained
 
 EMULEX LPFC FC SCSI DRIVER
-P:	James Smart
-M:	james.smart@emulex.com
+M:	James Smart <james.smart@emulex.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://sourceforge.net/projects/lpfcxxxx
 S:	Supported
 F:	drivers/scsi/lpfc/
 
 ENE CB710 FLASH CARD READER DRIVER
-P:	Michał Mirosław
-M:	mirq-linux@rere.qmqm.pl
-L:	linux-kernel@vger.kernel.org
+M:	Michał Mirosław <mirq-linux@rere.qmqm.pl>
 S:	Maintained
 F:	drivers/misc/cb710/
 F:	drivers/mmc/host/cb710-mmc.*
 F:	include/linux/cb710.h
 
 EPSON 1355 FRAMEBUFFER DRIVER
-P:	Christopher Hoover
-M:	ch@murgatroid.com
-P:	Christopher Hoover
-M:	ch@hpl.hp.com
+M:	Christopher Hoover <ch@murgatroid.com>
+M:	Christopher Hoover <ch@hpl.hp.com>
 S:	Maintained
 F:	drivers/video/epson1355fb.c
 
 EPSON S1D13XXX FRAMEBUFFER DRIVER
-P:	Kristoffer Ericson
-M:	kristoffer.ericson@gmail.com
+M:	Kristoffer Ericson <kristoffer.ericson@gmail.com>
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	drivers/video/s1d13xxxfb.c
 F:	include/video/s1d13xxxfb.h
 
 ETHEREXPRESS-16 NETWORK DRIVER
-P:	Philip Blundell
-M:	philb@gnu.org
+M:	Philip Blundell <philb@gnu.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/eexpress.*
 
 ETHERNET BRIDGE
-P:	Stephen Hemminger
-M:	shemminger@linux-foundation.org
+M:	Stephen Hemminger <shemminger@linux-foundation.org>
 L:	bridge@lists.linux-foundation.org
 W:	http://www.linux-foundation.org/en/Net:Bridge
 S:	Maintained
@@ -2192,8 +1921,7 @@ F:	include/linux/netfilter_bridge/
 F:	net/bridge/
 
 ETHERTEAM 16I DRIVER
-P:	Mika Kuoppala
-M:	miku@iki.fi
+M:	Mika Kuoppala <miku@iki.fi>
 S:	Maintained
 F:	drivers/net/eth16i.c
 
@@ -2205,12 +1933,9 @@ F:	fs/ext2/
 F:	include/linux/ext2*
 
 EXT3 FILE SYSTEM
-P:	Stephen Tweedie
-M:	sct@redhat.com
-P:	Andrew Morton
-M:	akpm@linux-foundation.org
-P:	Andreas Dilger
-M:	adilger@sun.com
+M:	Stephen Tweedie <sct@redhat.com>
+M:	Andrew Morton <akpm@linux-foundation.org>
+M:	Andreas Dilger <adilger@sun.com>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/ext3.txt
@@ -2218,10 +1943,8 @@ F:	fs/ext3/
 F:	include/linux/ext3*
 
 EXT4 FILE SYSTEM
-P:	Theodore Ts'o
-M:	tytso@mit.edu
-P:	Andreas Dilger
-M:	adilger@sun.com
+M:	"Theodore Ts'o" <tytso@mit.edu>
+M:	Andreas Dilger <adilger@sun.com>
 L:	linux-ext4@vger.kernel.org
 W:	http://ext4.wiki.kernel.org
 S:	Maintained
@@ -2229,30 +1952,26 @@ F:	Documentation/filesystems/ext4.txt
 F:	fs/ext4/
 
 F71805F HARDWARE MONITORING DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/f71805f
 F:	drivers/hwmon/f71805f.c
 
 FARSYNC SYNCHRONOUS DRIVER
-P:	Kevin Curtis
-M:	kevin.curtis@farsite.co.uk
+M:	Kevin Curtis <kevin.curtis@farsite.co.uk>
 W:	http://www.farsite.co.uk/
 S:	Supported
 F:	drivers/net/wan/farsync.*
 
 FAULT INJECTION SUPPORT
-P:	Akinobu Mita
-M:	akinobu.mita@gmail.com
+M:	Akinobu Mita <akinobu.mita@gmail.com>
 S:	Supported
 F:	Documentation/fault-injection/
 F:	lib/fault-inject.c
 
 FILE LOCKING (flock() and fcntl()/lockf())
-P:	Matthew Wilcox
-M:	matthew@wil.cx
+M:	Matthew Wilcox <matthew@wil.cx>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	include/linux/fcntl.h
@@ -2261,25 +1980,21 @@ F:	fs/fcntl.c
 F:	fs/locks.c
 
 FILESYSTEMS (VFS and infrastructure)
-P:	Alexander Viro
-M:	viro@zeniv.linux.org.uk
+M:	Alexander Viro <viro@zeniv.linux.org.uk>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	fs/*
 
 FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-P:	Riku Voipio
-M:	riku.vipio@iki.fi
+M:	Riku Voipio <riku.vipio@iki.fi>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/f75375s.c
 F:	include/linux/f75375s.h
 
 FIREWIRE SUBSYSTEM
-P:	Kristian Hoegsberg
-M:	krh@redhat.com
-P:	Stefan Richter
-M:	stefanr@s5r6.in-berlin.de
+M:	Kristian Hoegsberg <krh@redhat.com>
+M:	Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:	linux1394-devel@lists.sourceforge.net
 W:	http://www.linux1394.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
@@ -2294,15 +2009,13 @@ F:	drivers/base/firmware*.c
 F:	include/linux/firmware.h
 
 FPU EMULATOR
-P:	Bill Metzenthen
-M:	billm@melbpc.org.au
+M:	Bill Metzenthen <billm@melbpc.org.au>
 W:	http://floatingpoint.sourceforge.net/emulator/index.html
 S:	Maintained
 F:	arch/x86/math-emu/
 
 FRAME RELAY DLCI/FRAD (Sangoma drivers too)
-P:	Mike McLagan
-M:	mike.mclagan@linux.org
+M:	Mike McLagan <mike.mclagan@linux.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wan/dlci.c
@@ -2317,25 +2030,21 @@ F:	drivers/video/fb*
 F:	include/linux/fb.h
 
 FREESCALE DMA DRIVER
-P:	Li Yang
-M:	leoli@freescale.com
-P:	Zhang Wei
-M:	zw@zh-kernel.org
+M:	Li Yang <leoli@freescale.com>
+M:	Zhang Wei <zw@zh-kernel.org>
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 F:	drivers/dma/fsldma.*
 
 FREESCALE I2C CPM DRIVER
-P:	Jochen Friedrich
-M:	jochen@scram.de
+M:	Jochen Friedrich <jochen@scram.de>
 L:	linuxppc-dev@ozlabs.org
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-cpm.c
 
 FREESCALE IMX / MXC FRAMEBUFFER DRIVER
-P:	Sascha Hauer
-M:	kernel@pengutronix.de
+M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
@@ -2343,10 +2052,8 @@ F:	arch/arm/plat-mxc/include/mach/imxfb.h
 F:	drivers/video/imxfb.c
 
 FREESCALE SOC FS_ENET DRIVER
-P:	Pantelis Antoniou
-M:	pantelis.antoniou@gmail.com
-P:	Vitaly Bordug
-M:	vbordug@ru.mvista.com
+M:	Pantelis Antoniou <pantelis.antoniou@gmail.com>
+M:	Vitaly Bordug <vbordug@ru.mvista.com>
 L:	linuxppc-dev@ozlabs.org
 L:	netdev@vger.kernel.org
 S:	Maintained
@@ -2354,39 +2061,34 @@ F:	drivers/net/fs_enet/
 F:	include/linux/fs_enet_pd.h
 
 FREESCALE QUICC ENGINE LIBRARY
-P:	Timur Tabi
-M:	timur@freescale.com
+M:	Timur Tabi <timur@freescale.com>
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
 F:	arch/powerpc/sysdev/qe_lib/
 F:	arch/powerpc/include/asm/*qe.h
 
 FREESCALE HIGHSPEED USB DEVICE DRIVER
-P:	Li Yang
-M:	leoli@freescale.com
+M:	Li Yang <leoli@freescale.com>
 L:	linux-usb@vger.kernel.org
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 F:	drivers/usb/gadget/fsl_usb2_udc.c
 
 FREESCALE QUICC ENGINE UCC ETHERNET DRIVER
-P:	Li Yang
-M:	leoli@freescale.com
+M:	Li Yang <leoli@freescale.com>
 L:	netdev@vger.kernel.org
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 F:	drivers/net/ucc_geth*
 
 FREESCALE QUICC ENGINE UCC UART DRIVER
-P:	Timur Tabi
-M:	timur@freescale.com
+M:	Timur Tabi <timur@freescale.com>
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
 F:	drivers/serial/ucc_uart.c
 
 FREESCALE SOC SOUND DRIVERS
-P:	Timur Tabi
-M:	timur@freescale.com
+M:	Timur Tabi <timur@freescale.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
@@ -2394,17 +2096,14 @@ F:	sound/soc/fsl/fsl*
 F:	sound/soc/fsl/mpc8610_hpcd.c
 
 FREEVXFS FILESYSTEM
-P:	Christoph Hellwig
-M:	hch@infradead.org
+M:	Christoph Hellwig <hch@infradead.org>
 W:	ftp://ftp.openlinux.org/pub/people/hch/vxfs
 S:	Maintained
 F:	fs/freevxfs/
 
 FREEZER
-P:	Pavel Machek
-M:	pavel@ucw.cz
-P:	Rafael J. Wysocki
-M:	rjw@sisk.pl
+M:	Pavel Machek <pavel@ucw.cz>
+M:	"Rafael J. Wysocki" <rjw@sisk.pl>
 L:	linux-pm@lists.linux-foundation.org
 S:	Supported
 F:	Documentation/power/freezing-of-tasks.txt
@@ -2412,8 +2111,7 @@ F:	include/linux/freezer.h
 F:	kernel/freezer.c
 
 FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
-P:	David Howells
-M:	dhowells@redhat.com
+M:	David Howells <dhowells@redhat.com>
 L:	linux-cachefs@redhat.com
 S:	Supported
 F:	Documentation/filesystems/caching/
@@ -2421,8 +2119,7 @@ F:	fs/fscache/
 F:	include/linux/fscache*.h
 
 FTRACE
-P:	Steven Rostedt
-M:	rostedt@goodmis.org
+M:	Steven Rostedt <rostedt@goodmis.org>
 S:	Maintained
 F:	Documentation/trace/ftrace.txt
 F:	arch/*/*/*/ftrace.h
@@ -2431,21 +2128,18 @@ F:	include/*/ftrace.h
 F:	kernel/trace/
 
 FUJITSU FR-V (FRV) PORT
-P:	David Howells
-M:	dhowells@redhat.com
+M:	David Howells <dhowells@redhat.com>
 S:	Maintained
 F:	arch/frv/
 
 FUJITSU LAPTOP EXTRAS
-P:	Jonathan Woithe
-M:	jwoithe@physics.adelaide.edu.au
+M:	Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
 L:	linux-acpi@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/fujitsu-laptop.c
 
 FUSE: FILESYSTEM IN USERSPACE
-P:	Miklos Szeredi
-M:	miklos@szeredi.hu
+M:	Miklos Szeredi <miklos@szeredi.hu>
 L:	fuse-devel@lists.sourceforge.net
 W:	http://fuse.sourceforge.net/
 S:	Maintained
@@ -2453,30 +2147,26 @@ F:	fs/fuse/
 F:	include/linux/fuse.h
 
 FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
-P:	Rik Faith
-M:	faith@cs.unc.edu
+M:	Rik Faith <faith@cs.unc.edu>
 L:	linux-scsi@vger.kernel.org
 S:	Odd Fixes (e.g., new signatures)
 F:	drivers/scsi/fdomain.*
 
 GDT SCSI DISK ARRAY CONTROLLER DRIVER
-P:	Achim Leubner
-M:	achim_leubner@adaptec.com
+M:	Achim Leubner <achim_leubner@adaptec.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.icp-vortex.com/
 S:	Supported
 F:	drivers/scsi/gdt*
 
 GENERIC GPIO I2C DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	drivers/i2c/busses/i2c-gpio.c
 F:	include/linux/i2c-gpio.h
 
 GENERIC HDLC (WAN) DRIVERS
-P:	Krzysztof Halasa
-M:	khc@pm.waw.pl
+M:	Krzysztof Halasa <khc@pm.waw.pl>
 W:	http://www.kernel.org/pub/linux/utils/net/hdlc/
 S:	Maintained
 F:	drivers/net/wan/c101.c
@@ -2488,16 +2178,14 @@ F:	drivers/net/wan/pci200syn.c
 F:	drivers/net/wan/wanxl*
 
 GENERIC INCLUDE/ASM HEADER FILES
-P:	Arnd Bergmann
-M:	arnd@arndb.de
+M:	Arnd Bergmann <arnd@arndb.de>
 L:	linux-arch@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
 S:	Maintained
 F:	include/asm-generic
 
 GFS2 FILE SYSTEM
-P:	Steven Whitehouse
-M:	swhiteho@redhat.com
+M:	Steven Whitehouse <swhiteho@redhat.com>
 L:	cluster-devel@redhat.com
 W:	http://sources.redhat.com/cluster/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git
@@ -2508,10 +2196,8 @@ F:	fs/gfs2/
 F:	include/linux/gfs2_ondisk.h
 
 GIGASET ISDN DRIVERS
-P:	Hansjoerg Lipp
-M:	hjlipp@web.de
-P:	Tilman Schmidt
-M:	tilman@imap.cc
+M:	Hansjoerg Lipp <hjlipp@web.de>
+M:	Tilman Schmidt <tilman@imap.cc>
 L:	gigaset307x-common@lists.sourceforge.net
 W:	http://gigaset307x.sourceforge.net/
 S:	Maintained
@@ -2520,8 +2206,7 @@ F:	drivers/isdn/gigaset/
 F:	include/linux/gigaset_dev.h
 
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-P:	Frank Seidel
-M:	frank@f-seidel.de
+M:	Frank Seidel <frank@f-seidel.de>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
 S:	Maintained
@@ -2533,40 +2218,42 @@ S:	Odd Fixes
 F:	drivers/char/hvc_*
 
 GSPCA FINEPIX SUBDRIVER
-P:	Frank Zago
-M:	frank@zago.net
+M:	Frank Zago <frank@zago.net>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/finepix.c
 
 GSPCA M5602 SUBDRIVER
-P:	Erik Andren
-M:	erik.andren@gmail.com
+M:	Erik Andren <erik.andren@gmail.com>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/m5602/
 
 GSPCA PAC207 SONIXB SUBDRIVER
-P:	Hans de Goede
-M:	hdegoede@redhat.com
+M:	Hans de Goede <hdegoede@redhat.com>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/pac207.c
 
+GSPCA SN9C20X SUBDRIVER
+M:	Brian Johnson <brijohn@gmail.com>
+L:	linux-media@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+S:	Maintained
+F:	drivers/media/video/gspca/sn9c20x.c
+
 GSPCA T613 SUBDRIVER
-P:	Leandro Costantino
-M:	lcostantino@gmail.com
+M:	Leandro Costantino <lcostantino@gmail.com>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/t613.c
 
 GSPCA USB WEBCAM DRIVER
-P:	Jean-Francois Moine
-M:	moinejf@free.fr
+M:	Jean-Francois Moine <moinejf@free.fr>
 W:	http://moinejf.free.fr
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -2586,31 +2273,27 @@ F:	drivers/char/hw_random/
 F:	include/linux/hw_random.h
 
 HARMONY SOUND DRIVER
-P:	Kyle McMartin
-M:	kyle@mcmartin.ca
+M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
 F:	sound/parisc/harmony.*
 
 HAYES ESP SERIAL DRIVER
-P:	Andrew J. Robinson
-M:	arobinso@nyx.net
+M:	"Andrew J. Robinson" <arobinso@nyx.net>
 W:	http://www.nyx.net/~arobinso
 S:	Maintained
 F:	Documentation/serial/hayes-esp.txt
 F:	drivers/char/esp.c
 
 HEWLETT-PACKARD SMART2 RAID DRIVER
-P:	Chirag Kantharia
-M:	chirag.kantharia@hp.com
+M:	Chirag Kantharia <chirag.kantharia@hp.com>
 L:	iss_storagedev@hp.com
 S:	Maintained
 F:	Documentation/blockdev/cpqarray.txt
 F:	drivers/block/cpqarray.*
 
 HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
-P:	Mike Miller
-M:	mike.miller@hp.com
+M:	Mike Miller <mike.miller@hp.com>
 L:	iss_storagedev@hp.com
 S:	Supported
 F:	Documentation/blockdev/cciss.txt
@@ -2618,25 +2301,21 @@ F:	drivers/block/cciss*
 F:	include/linux/cciss_ioctl.h
 
 HFS FILESYSTEM
-P:	Roman Zippel
-M:	zippel@linux-m68k.org
+M:	Roman Zippel <zippel@linux-m68k.org>
 S:	Maintained
 F:	Documentation/filesystems/hfs.txt
 F:	fs/hfs/
 
 HGA FRAMEBUFFER DRIVER
-P:	Ferenc Bakonyi
-M:	fero@drama.obuda.kando.hu
+M:	Ferenc Bakonyi <fero@drama.obuda.kando.hu>
 L:	linux-nvidia@lists.surfsouth.com
 W:	http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml
 S:	Maintained
 F:	drivers/video/hgafb.c
 
 HIBERNATION (aka Software Suspend, aka swsusp)
-P:	Pavel Machek
-M:	pavel@ucw.cz
-P:	Rafael J. Wysocki
-M:	rjw@sisk.pl
+M:	Pavel Machek <pavel@ucw.cz>
+M:	"Rafael J. Wysocki" <rjw@sisk.pl>
 L:	linux-pm@lists.linux-foundation.org
 S:	Supported
 F:	arch/x86/power/
@@ -2648,8 +2327,7 @@ F:	include/linux/pm.h
 F:	arch/*/include/asm/suspend*.h
 
 HID CORE LAYER
-P:	Jiri Kosina
-M:	jkosina@suse.cz
+M:	Jiri Kosina <jkosina@suse.cz>
 L:	linux-input@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
@@ -2657,16 +2335,14 @@ F:	drivers/hid/
 F:	include/linux/hid*
 
 HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
-P:	Thomas Gleixner
-M:	tglx@linutronix.de
+M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Maintained
 F:	Documentation/timers/
 F:	kernel/hrtimer.c
 F:	include/linux/hrtimer.h
 
 HIGH-SPEED SCC DRIVER FOR AX.25
-P:	Klaus Kudielka
-M:	klaus.kudielka@ieee.org
+M:	Klaus Kudielka <klaus.kudielka@ieee.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.nt.tuwien.ac.at/~kkudielk/Linux/
 S:	Maintained
@@ -2674,16 +2350,14 @@ F:	drivers/net/hamradio/dmascc.c
 F:	drivers/net/hamradio/scc.c
 
 HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
-P:	HighPoint Linux Team
-M:	linux@highpoint-tech.com
+M:	HighPoint Linux Team <linux@highpoint-tech.com>
 W:	http://www.highpoint-tech.com
 S:	Supported
 F:	Documentation/scsi/hptiop.txt
 F:	drivers/scsi/hptiop.c
 
 HIPPI
-P:	Jes Sorensen
-M:	jes@trained-monkey.org
+M:	Jes Sorensen <jes@trained-monkey.org>
 L:	linux-hippi@sunsite.dk
 S:	Maintained
 F:	include/linux/hippidevice.h
@@ -2691,8 +2365,7 @@ F:	include/linux/if_hippi.h
 F:	net/802/hippi.c
 
 HOST AP DRIVER
-P:	Jouni Malinen
-M:	j@w1.fi
+M:	Jouni Malinen <j@w1.fi>
 L:	hostap@shmoo.com (subscribers-only)
 L:	linux-wireless@vger.kernel.org
 W:	http://hostap.epitest.fi/
@@ -2700,82 +2373,69 @@ S:	Maintained
 F:	drivers/net/wireless/hostap/
 
 HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
-P:	Carlos Corbacho
-M:	carlos@strangeworlds.co.uk
+M:	Carlos Corbacho <carlos@strangeworlds.co.uk>
 S:	Odd Fixes
 F:	drivers/platform/x86/tc1100-wmi.c
 
 HP100:	Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series
-P:	Jaroslav Kysela
-M:	perex@perex.cz
+M:	Jaroslav Kysela <perex@perex.cz>
 S:	Maintained
 F:	drivers/net/hp100.*
 
 HPET:	High Precision Event Timers driver
-P:	Clemens Ladisch
-M:	clemens@ladisch.de
+M:	Clemens Ladisch <clemens@ladisch.de>
 S:	Maintained
 F:	Documentation/timers/hpet.txt
 F:	drivers/char/hpet.c
 F:	include/linux/hpet.h
 
 HPET:	i386
-P:	Venkatesh Pallipadi (Venki)
-M:	venkatesh.pallipadi@intel.com
+M:	"Venkatesh Pallipadi (Venki)" <venkatesh.pallipadi@intel.com>
 S:	Maintained
 F:	arch/x86/kernel/hpet.c
 F:	arch/x86/include/asm/hpet.h
 
 HPET:	x86_64
-P:	Vojtech Pavlik
-M:	vojtech@suse.cz
+M:	Vojtech Pavlik <vojtech@suse.cz>
 S:	Maintained
 
 HPET:	ACPI
-P:	Bob Picco
-M:	bob.picco@hp.com
+M:	Bob Picco <bob.picco@hp.com>
 S:	Maintained
 F:	drivers/char/hpet.c
 
 HPFS FILESYSTEM
-P:	Mikulas Patocka
-M:	mikulas@artax.karlin.mff.cuni.cz
+M:	Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
 W:	http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
 S:	Maintained
 F:	fs/hpfs/
 
 HSO 3G MODEM DRIVER
-P:	Jan Dumon
-M:	j.dumon@option.com
+M:	Jan Dumon <j.dumon@option.com>
 W:	http://www.pharscape.org
 S:	Maintained
 F:	drivers/net/usb/hso.c
 
 HTCPEN TOUCHSCREEN DRIVER
-P:	Pau Oliva Fora
-M:	pof@eslack.org
+M:	Pau Oliva Fora <pof@eslack.org>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/input/touchscreen/htcpen.c
 
 HUGETLB FILESYSTEM
-P:	William Irwin
-M:	wli@holomorphy.com
+M:	William Irwin <wli@holomorphy.com>
 S:	Maintained
 F:	fs/hugetlbfs/
 
 I2C/SMBUS STUB DRIVER
-P:	Mark M. Hoffman
-M:	mhoffman@lightlink.com
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-stub.c
 
 I2C SUBSYSTEM
-P:	Jean Delvare (PC drivers, core)
-M:	khali@linux-fr.org
-P:	Ben Dooks (embedded platforms)
-M:	ben-linux@fluff.org
+M:	"Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
+M:	"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
@@ -2787,28 +2447,25 @@ F:	include/linux/i2c-dev.h
 F:	include/linux/i2c-id.h
 
 I2C-TINY-USB DRIVER
-P:	Till Harbaum
-M:	till@harbaum.org
+M:	Till Harbaum <till@harbaum.org>
 L:	linux-i2c@vger.kernel.org
 W:	http://www.harbaum.org/till/i2c_tiny_usb
 S:	Maintained
 F:	drivers/i2c/busses/i2c-tiny-usb.c
 
 i386 BOOT CODE
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	"H. Peter Anvin" <hpa@zytor.com>
 S:	Maintained
 F:	arch/x86/boot/
 
 i386 SETUP CODE / CPU ERRATA WORKAROUNDS
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	"H. Peter Anvin" <hpa@zytor.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup.git
 S:	Maintained
 
 IA64 (Itanium) PLATFORM
-P:	Tony Luck
-M:	tony.luck@intel.com
+M:	Tony Luck <tony.luck@intel.com>
+M:	Fenghua Yu <fenghua.yu@intel.com>
 L:	linux-ia64@vger.kernel.org
 W:	http://www.ia64-linux.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git
@@ -2816,29 +2473,25 @@ S:	Maintained
 F:	arch/ia64/
 
 IBM MCA SCSI SUBSYSTEM DRIVER
-P:	Michael Lang
-M:	langa2@kph.uni-mainz.de
+M:	Michael Lang <langa2@kph.uni-mainz.de>
 W:	http://www.uni-mainz.de/~langm000/linux.html
 S:	Maintained
 F:	drivers/scsi/ibmmca.c
 
 IBM Power Linux RAID adapter
-P:	Brian King
-M:	brking@us.ibm.com
+M:	Brian King <brking@us.ibm.com>
 S:	Supported
 F:	drivers/scsi/ipr.*
 
 IBM ServeRAID RAID DRIVER
 P:	Jack Hammer
-P:	Dave Jeffery
-M:	ipslinux@adaptec.com
+M:	Dave Jeffery <ipslinux@adaptec.com>
 W:	http://www.developer.ibm.com/welcome/netfinity/serveraid.html
 S:	Supported
 F:	drivers/scsi/ips.*
 
 IDE SUBSYSTEM
-P:	David S. Miller
-M:	davem@davemloft.net
+M:	"David S. Miller" <davem@davemloft.net>
 L:	linux-ide@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6.git
 S:	Maintained
@@ -2847,25 +2500,21 @@ F:	drivers/ide/
 F:	include/linux/ide.h
 
 IDE/ATAPI DRIVERS
-P:	Borislav Petkov
-M:	petkovbb@gmail.com
+M:	Borislav Petkov <petkovbb@gmail.com>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	Documentation/cdrom/ide-cd
 F:	drivers/ide/ide-cd*
 
 IDLE-I7300
-P:	Andy Henroid
-M:	andrew.d.henroid@intel.com
+M:	Andy Henroid <andrew.d.henroid@intel.com>
 L:	linux-pm@lists.linux-foundation.org
 S:	Supported
 F:	drivers/idle/i7300_idle.c
 
 IEEE 1394 SUBSYSTEM
-P:	Ben Collins
-M:	ben.collins@ubuntu.com
-P:	Stefan Richter
-M:	stefanr@s5r6.in-berlin.de
+M:	Ben Collins <ben.collins@ubuntu.com>
+M:	Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:	linux1394-devel@lists.sourceforge.net
 W:	http://www.linux1394.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
@@ -2873,20 +2522,16 @@ S:	Maintained
 F:	drivers/ieee1394/
 
 IEEE 1394 RAW I/O DRIVER
-P:	Dan Dennedy
-M:	dan@dennedy.org
-P:	Stefan Richter
-M:	stefanr@s5r6.in-berlin.de
+M:	Dan Dennedy <dan@dennedy.org>
+M:	Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:	linux1394-devel@lists.sourceforge.net
 S:	Maintained
 F:	drivers/ieee1394/raw1394*
 
 IEEE 802.15.4 SUBSYSTEM
-P:	Dmitry Eremin-Solenikov
-M:	dbaryshkov@gmail.com
-P:	Sergey Lapin
-M:	slapin@ossfans.org
-L:	linux-zigbee-devel@lists.sourceforge.net
+M:	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M:	Sergey Lapin <slapin@ossfans.org>
+L:	linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://apps.sourceforge.net/trac/linux-zigbee
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
 S:	Maintained
@@ -2894,8 +2539,7 @@ F:	net/ieee802154/
 F:	drivers/ieee802154/
 
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
-P:	Mimi Zohar
-M:	zohar@us.ibm.com
+M:	Mimi Zohar <zohar@us.ibm.com>
 S:	Supported
 F:	security/integrity/ima/
 
@@ -2905,12 +2549,9 @@ S:	Orphan
 F:	drivers/video/imsttfb.c
 
 INFINIBAND SUBSYSTEM
-P:	Roland Dreier
-M:	rolandd@cisco.com
-P:	Sean Hefty
-M:	sean.hefty@intel.com
-P:	Hal Rosenstock
-M:	hal.rosenstock@gmail.com
+M:	Roland Dreier <rolandd@cisco.com>
+M:	Sean Hefty <sean.hefty@intel.com>
+M:	Hal Rosenstock <hal.rosenstock@gmail.com>
 L:	general@lists.openfabrics.org (moderated for non-subscribers)
 W:	http://www.openib.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
@@ -2920,65 +2561,55 @@ F:	drivers/infiniband/
 F:	include/linux/if_infiniband.h
 
 INOTIFY
-P:	John McCutchan
-M:	john@johnmccutchan.com
-P:	Robert Love
-M:	rlove@rlove.org
-P:	Eric Paris
-M:	eparis@parisplace.org
+M:	John McCutchan <john@johnmccutchan.com>
+M:	Robert Love <rlove@rlove.org>
+M:	Eric Paris <eparis@parisplace.org>
 S:	Maintained
 F:	Documentation/filesystems/inotify.txt
 F:	fs/notify/inotify/
 F:	include/linux/inotify.h
 
 INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
-P:	Dmitry Torokhov
-M:	dmitry.torokhov@gmail.com
-M:	dtor@mail.ru
+M:	Dmitry Torokhov <dmitry.torokhov@gmail.com>
+M:	Dmitry Torokhov <dtor@mail.ru>
 L:	linux-input@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
 S:	Maintained
 F:	drivers/input/
 
 INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
-P:	Sylvain Meyer
-M:	sylvain.meyer@worldonline.fr
+M:	Sylvain Meyer <sylvain.meyer@worldonline.fr>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/fb/intelfb.txt
 F:	drivers/video/intelfb/
 
 INTEL 810/815 FRAMEBUFFER DRIVER
-P:	Antonino Daplas
-M:	adaplas@gmail.com
+M:	Antonino Daplas <adaplas@gmail.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/i810/
 
 INTEL MENLOW THERMAL DRIVER
-P:	Sujith Thomas
-M:	sujith.thomas@intel.com
+M:	Sujith Thomas <sujith.thomas@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/platform/x86/intel_menlow.c
 
 INTEL IA32 MICROCODE UPDATE SUPPORT
-P:	Tigran Aivazian
-M:	tigran@aivazian.fsnet.co.uk
+M:	Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
 S:	Maintained
 F:	arch/x86/kernel/microcode_core.c
 F:	arch/x86/kernel/microcode_intel.c
 
 INTEL I/OAT DMA DRIVER
-P:	Maciej Sosnowski
-M:	maciej.sosnowski@intel.com
+M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
 S:	Supported
 F:	drivers/dma/ioat*
 
 INTEL IOMMU (VT-d)
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	David Woodhouse <dwmw2@infradead.org>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.infradead.org/iommu-2.6.git
 S:	Supported
@@ -2986,14 +2617,12 @@ F:	drivers/pci/intel-iommu.c
 F:	include/linux/intel-iommu.h
 
 INTEL IOP-ADMA DMA DRIVER
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/iop-adma.c
 
 INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
-P:	Krzysztof Halasa
-M:	khc@pm.waw.pl
+M:	Krzysztof Halasa <khc@pm.waw.pl>
 S:	Maintained
 F:	arch/arm/mach-ixp4xx/include/mach/qmgr.h
 F:	arch/arm/mach-ixp4xx/include/mach/npe.h
@@ -3003,29 +2632,22 @@ F:	drivers/net/arm/ixp4xx_eth.c
 F:	drivers/net/wan/ixp4xx_hss.c
 
 INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
-P:	Deepak Saxena
-M:	dsaxena@plexity.net
+M:	Deepak Saxena <dsaxena@plexity.net>
 S:	Maintained
 F:	drivers/char/hw_random/ixp4xx-rng.c
 
 INTEL IXP2000 ETHERNET DRIVER
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ixp2000/
 
 INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
-P:	Jeff Kirsher
-M:	jeffrey.t.kirsher@intel.com
-P:	Jesse Brandeburg
-M:	jesse.brandeburg@intel.com
-P:	Bruce Allan
-M:	bruce.w.allan@intel.com
-P:	PJ Waskiewicz
-M:	peter.p.waskiewicz.jr@intel.com
-P:	John Ronciak
-M:	john.ronciak@intel.com
+M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
+M:	Bruce Allan <bruce.w.allan@intel.com>
+M:	PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M:	John Ronciak <john.ronciak@intel.com>
 L:	e1000-devel@lists.sourceforge.net
 W:	http://e1000.sourceforge.net/
 S:	Supported
@@ -3037,12 +2659,9 @@ F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
-P:	Zhu Yi
-M:	yi.zhu@intel.com
-P:	James Ketrenos
-M:	jketreno@linux.intel.com
-P:	Reinette Chatre
-M:	reinette.chatre@intel.com
+M:	Zhu Yi <yi.zhu@intel.com>
+M:	James Ketrenos <jketreno@linux.intel.com>
+M:	Reinette Chatre <reinette.chatre@intel.com>
 L:	linux-wireless@vger.kernel.org
 L:	ipw2100-devel@lists.sourceforge.net
 W:	http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
@@ -3052,12 +2671,9 @@ F:	Documentation/networking/README.ipw2100
 F:	drivers/net/wireless/ipw2x00/ipw2100.*
 
 INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
-P:	Zhu Yi
-M:	yi.zhu@intel.com
-P:	James Ketrenos
-M:	jketreno@linux.intel.com
-P:	Reinette Chatre
-M:	reinette.chatre@intel.com
+M:	Zhu Yi <yi.zhu@intel.com>
+M:	James Ketrenos <jketreno@linux.intel.com>
+M:	Reinette Chatre <reinette.chatre@intel.com>
 L:	linux-wireless@vger.kernel.org
 L:	ipw2100-devel@lists.sourceforge.net
 W:	http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
@@ -3067,8 +2683,7 @@ F:	Documentation/networking/README.ipw2200
 F:	drivers/net/wireless/ipw2x00/ipw2200.*
 
 INTEL WIRELESS WIMAX CONNECTION 2400
-P:	Inaky Perez-Gonzalez
-M:	inaky.perez-gonzalez@intel.com
+M:	Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
 M:	linux-wimax@intel.com
 L:	wimax@linuxwimax.org
 S:	Supported
@@ -3078,10 +2693,8 @@ F:	drivers/net/wimax/i2400m/
 F:	include/linux/wimax/i2400m.h
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
-P:	Zhu Yi
-M:	yi.zhu@intel.com
-P:	Reinette Chatre
-M:	reinette.chatre@intel.com
+M:	Zhu Yi <yi.zhu@intel.com>
+M:	Reinette Chatre <reinette.chatre@intel.com>
 L:	linux-wireless@vger.kernel.org
 L:	ipw3945-devel@lists.sourceforge.net
 W:	http://intellinuxwireless.org
@@ -3090,47 +2703,39 @@ S:	Supported
 F:	drivers/net/wireless/iwlwifi/
 
 IOC3 ETHERNET DRIVER
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-mips@linux-mips.org
 S:	Maintained
 F:	drivers/net/ioc3-eth.c
 
 IOC3 SERIAL DRIVER
-P:	Pat Gefre
-M:	pfg@sgi.com
+M:	Pat Gefre <pfg@sgi.com>
 L:	linux-mips@linux-mips.org
 S:	Maintained
 F:	drivers/serial/ioc3_serial.c
 
 IP MASQUERADING
-P:	Juanjo Ciarlante
-M:	jjciarla@raiz.uncu.edu.ar
+M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
 S:	Maintained
 F:	net/ipv4/netfilter/ipt_MASQUERADE.c
 
 IP1000A 10/100/1000 GIGABIT ETHERNET DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
-P:	Sorbica Shieh
-M:	sorbica@icplus.com.tw
-P:	Jesse Huang
-M:	jesse@icplus.com.tw
+M:	Francois Romieu <romieu@fr.zoreil.com>
+M:	Sorbica Shieh <sorbica@icplus.com.tw>
+M:	Jesse Huang <jesse@icplus.com.tw>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ipg.c
 
 IPATH DRIVER
-P:	Ralph Campbell
-M:	infinipath@qlogic.com
+M:	Ralph Campbell <infinipath@qlogic.com>
 L:	general@lists.openfabrics.org
 T:	git git://git.qlogic.com/ipath-linux-2.6
 S:	Supported
 F:	drivers/infiniband/hw/ipath/
 
 IPMI SUBSYSTEM
-P:	Corey Minyard
-M:	minyard@acm.org
+M:	Corey Minyard <minyard@acm.org>
 L:	openipmi-developer@lists.sourceforge.net
 W:	http://openipmi.sourceforge.net/
 S:	Supported
@@ -3139,20 +2744,16 @@ F:	drivers/char/ipmi/
 F:	include/linux/ipmi*
 
 IPS SCSI RAID DRIVER
-P:	Adaptec OEM Raid Solutions
-M:	aacraid@adaptec.com
+M:	Adaptec OEM Raid Solutions <aacraid@adaptec.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.adaptec.com/
 S:	Maintained
 F:	drivers/scsi/ips*
 
 IPVS
-P:	Wensong Zhang
-M:	wensong@linux-vs.org
-P:	Simon Horman
-M:	horms@verge.net.au
-P:	Julian Anastasov
-M:	ja@ssi.bg
+M:	Wensong Zhang <wensong@linux-vs.org>
+M:	Simon Horman <horms@verge.net.au>
+M:	Julian Anastasov <ja@ssi.bg>
 L:	netdev@vger.kernel.org
 L:	lvs-devel@vger.kernel.org
 S:	Maintained
@@ -3160,17 +2761,14 @@ F:	Documentation/networking/ipvs-sysctl.txt
 F:	net/netfilter/ipvs/
 
 IPWIRELESS DRIVER
-P:	Jiri Kosina
-M:	jkosina@suse.cz
-P:	David Sterba
-M:	dsterba@suse.cz
+M:	Jiri Kosina <jkosina@suse.cz>
+M:	David Sterba <dsterba@suse.cz>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git
 F:	drivers/char/pcmcia/ipwireless/
 
 IPX NETWORK LAYER
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	include/linux/ipx.h
@@ -3178,8 +2776,7 @@ F:	include/net/ipx.h
 F:	net/ipx/
 
 IRDA SUBSYSTEM
-P:	Samuel Ortiz
-M:	samuel@sortiz.org
+M:	Samuel Ortiz <samuel@sortiz.org>
 L:	irda-users@lists.sourceforge.net (subscribers-only)
 W:	http://irda.sourceforge.net/
 S:	Maintained
@@ -3190,16 +2787,14 @@ F:	include/net/irda/
 F:	net/irda/
 
 ISAPNP
-P:	Jaroslav Kysela
-M:	perex@perex.cz
+M:	Jaroslav Kysela <perex@perex.cz>
 S:	Maintained
 F:	Documentation/isapnp.txt
 F:	drivers/pnp/isapnp/
 F:	include/linux/isapnp.h
 
 ISCSI
-P:	Mike Christie
-M:	michaelc@cs.wisc.edu
+M:	Mike Christie <michaelc@cs.wisc.edu>
 L:	open-iscsi@googlegroups.com
 W:	www.open-iscsi.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mnc/linux-2.6-iscsi.git
@@ -3208,8 +2803,7 @@ F:	drivers/scsi/*iscsi*
 F:	include/scsi/*iscsi*
 
 ISDN SUBSYSTEM
-P:	Karsten Keil
-M:	isdn@linux-pingi.de
+M:	Karsten Keil <isdn@linux-pingi.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
 W:	http://www.isdn4linux.de
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git
@@ -3220,18 +2814,15 @@ F:	include/linux/isdn.h
 F:	include/linux/isdn/
 
 ISDN SUBSYSTEM (Eicon active card driver)
-P:	Armin Schindler
-M:	mac@melware.de
+M:	Armin Schindler <mac@melware.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
 W:	http://www.melware.de
 S:	Maintained
 F:	drivers/isdn/hardware/eicon/
 
 IVTV VIDEO4LINUX DRIVER
-P:	Hans Verkuil
-M:	hverkuil@xs4all.nl
+M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	ivtv-devel@ivtvdriver.org
-L:	ivtv-users@ivtvdriver.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://www.ivtvdriver.org
@@ -3241,25 +2832,22 @@ F:	drivers/media/video/ivtv/
 F:	include/linux/ivtv*
 
 JFS FILESYSTEM
-P:	Dave Kleikamp
-M:	shaggy@austin.ibm.com
+M:	Dave Kleikamp <shaggy@linux.vnet.ibm.com>
 L:	jfs-discussion@lists.sourceforge.net
 W:	http://jfs.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
-S:	Supported
+S:	Maintained
 F:	Documentation/filesystems/jfs.txt
 F:	fs/jfs/
 
 JME NETWORK DRIVER
-P:	Guo-Fu Tseng
-M:	cooldavid@cooldavid.org
+M:	Guo-Fu Tseng <cooldavid@cooldavid.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/jme.*
 
 JOURNALLING FLASH FILE SYSTEM V2 (JFFS2)
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	David Woodhouse <dwmw2@infradead.org>
 L:	linux-mtd@lists.infradead.org
 W:	http://www.linux-mtd.infradead.org/doc/jffs2.html
 S:	Maintained
@@ -3267,10 +2855,8 @@ F:	fs/jffs2/
 F:	include/linux/jffs2.h
 
 JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
-P:	Stephen Tweedie
-M:	sct@redhat.com
-P:	Andrew Morton
-M:	akpm@linux-foundation.org
+M:	Stephen Tweedie <sct@redhat.com>
+M:	Andrew Morton <akpm@linux-foundation.org>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	fs/jbd*/
@@ -3278,48 +2864,41 @@ F:	include/linux/ext*jbd*.h
 F:	include/linux/jbd*.h
 
 K8TEMP HARDWARE MONITORING DRIVER
-P:	Rudolf Marek
-M:	r.marek@assembler.cz
+M:	Rudolf Marek <r.marek@assembler.cz>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/k8temp
 F:	drivers/hwmon/k8temp.c
 
 KCONFIG
-P:	Roman Zippel
-M:	zippel@linux-m68k.org
+M:	Roman Zippel <zippel@linux-m68k.org>
 L:	linux-kbuild@vger.kernel.org
 S:	Maintained
 F:	Documentation/kbuild/kconfig-language.txt
 F:	scripts/kconfig/
 
 KDUMP
-P:	Vivek Goyal
-M:	vgoyal@redhat.com
-P:	Haren Myneni
-M:	hbabu@us.ibm.com
+M:	Vivek Goyal <vgoyal@redhat.com>
+M:	Haren Myneni <hbabu@us.ibm.com>
 L:	kexec@lists.infradead.org
 W:	http://lse.sourceforge.net/kdump/
 S:	Maintained
 F:	Documentation/kdump/
 
 KERNEL AUTOMOUNTER (AUTOFS)
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	"H. Peter Anvin" <hpa@zytor.com>
 L:	autofs@linux.kernel.org
 S:	Odd Fixes
 F:	fs/autofs/
 
 KERNEL AUTOMOUNTER v4 (AUTOFS4)
-P:	Ian Kent
-M:	raven@themaw.net
+M:	Ian Kent <raven@themaw.net>
 L:	autofs@linux.kernel.org
 S:	Maintained
 F:	fs/autofs4/
 
 KERNEL BUILD
-P:	Sam Ravnborg
-M:	sam@ravnborg.org
+M:	Sam Ravnborg <sam@ravnborg.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
 L:	linux-kbuild@vger.kernel.org
@@ -3329,16 +2908,13 @@ F:	Makefile
 F:	scripts/Makefile.*
 
 KERNEL JANITORS
-P:	Several
 L:	kernel-janitors@vger.kernel.org
 W:	http://www.kerneljanitors.org/
-S:	Maintained
+S:	Odd fixes
 
 KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
-P:	J. Bruce Fields
-M:	bfields@fieldses.org
-P:	Neil Brown
-M:	neilb@suse.de
+M:	"J. Bruce Fields" <bfields@fieldses.org>
+M:	Neil Brown <neilb@suse.de>
 L:	linux-nfs@vger.kernel.org
 W:	http://nfs.sourceforge.net/
 S:	Supported
@@ -3351,8 +2927,7 @@ F:	include/linux/lockd/
 F:	include/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
-P:	Avi Kivity
-M:	avi@redhat.com
+M:	Avi Kivity <avi@redhat.com>
 L:	kvm@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -3363,8 +2938,7 @@ F:	include/linux/kvm*
 F:	virt/kvm/
 
 KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
-P:	Joerg Roedel
-M:	joerg.roedel@amd.com
+M:	Joerg Roedel <joerg.roedel@amd.com>
 L:	kvm@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -3373,8 +2947,7 @@ F:	arch/x86/kvm/kvm_svm.h
 F:	arch/x86/kvm/svm.c
 
 KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
-P:	Hollis Blanchard
-M:	hollisb@us.ibm.com
+M:	Hollis Blanchard <hollisb@us.ibm.com>
 L:	kvm-ppc@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -3382,8 +2955,7 @@ F:	arch/powerpc/include/asm/kvm*
 F:	arch/powerpc/kvm/
 
 KERNEL VIRTUAL MACHINE For Itanium (KVM/IA64)
-P:	Xiantao Zhang
-M:	xiantao.zhang@intel.com
+M:	Xiantao Zhang <xiantao.zhang@intel.com>
 L:	kvm-ia64@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -3392,10 +2964,8 @@ F:	arch/ia64/include/asm/kvm*
 F:	arch/ia64/kvm/
 
 KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
-P:	Carsten Otte
-M:	cotte@de.ibm.com
-P:	Christian Borntraeger
-M:	borntraeger@de.ibm.com
+M:	Carsten Otte <cotte@de.ibm.com>
+M:	Christian Borntraeger <borntraeger@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -3405,8 +2975,7 @@ F:	arch/s390/include/asm/kvm*
 F:	arch/s390/kvm/
 
 KEXEC
-P:	Eric Biederman
-M:	ebiederm@xmission.com
+M:	Eric Biederman <ebiederm@xmission.com>
 W:	http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
 L:	kexec@lists.infradead.org
 S:	Maintained
@@ -3414,8 +2983,7 @@ F:	include/linux/kexec.h
 F:	kernel/kexec.c
 
 KGDB
-P:	Jason Wessel
-M:	jason.wessel@windriver.com
+M:	Jason Wessel <jason.wessel@windriver.com>
 L:	kgdb-bugreport@lists.sourceforge.net
 S:	Maintained
 F:	Documentation/DocBook/kgdb.tmpl
@@ -3425,17 +2993,13 @@ F:	include/linux/kgdb.h
 F:	kernel/kgdb.c
 
 KMEMCHECK
-P:	Vegard Nossum
-M:	vegardno@ifi.uio.no
+M:	Vegard Nossum <vegardno@ifi.uio.no>
 P	Pekka Enberg
 M:	penberg@cs.helsinki.fi
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
 KMEMLEAK
-P:	Catalin Marinas
-M:	catalin.marinas@arm.com
-L:	linux-kernel@vger.kernel.org
+M:	Catalin Marinas <catalin.marinas@arm.com>
 S:	Maintained
 F:	Documentation/kmemleak.txt
 F:	include/linux/kmemleak.h
@@ -3443,30 +3007,24 @@ F:	mm/kmemleak.c
 F:	mm/kmemleak-test.c
 
 KMEMTRACE
-P:	Eduard - Gabriel Munteanu
-M:	eduard.munteanu@linux360.ro
+M:	Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
 S:	Maintained
 F:	Documentation/trace/kmemtrace.txt
 F:	include/linux/kmemtrace.h
 F:	kernel/trace/kmemtrace.c
 
 KPROBES
-P:	Ananth N Mavinakayanahalli
-M:	ananth@in.ibm.com
-P:	Anil S Keshavamurthy
-M:	anil.s.keshavamurthy@intel.com
-P:	David S. Miller
-M:	davem@davemloft.net
-P:	Masami Hiramatsu
-M:	mhiramat@redhat.com
+M:	Ananth N Mavinakayanahalli <ananth@in.ibm.com>
+M:	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+M:	"David S. Miller" <davem@davemloft.net>
+M:	Masami Hiramatsu <mhiramat@redhat.com>
 S:	Maintained
 F:	Documentation/kprobes.txt
 F:	include/linux/kprobes.h
 F:	kernel/kprobes.c
 
 KS0108 LCD CONTROLLER DRIVER
-P:	Miguel Ojeda Sandonis
-M:	miguel.ojeda.sandonis@gmail.com
+M:	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -3482,31 +3040,27 @@ F:	include/*/lapb.h
 F:	net/lapb/
 
 LASI 53c700 driver for PARISC
-P:	James E.J. Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	Documentation/scsi/53c700.txt
 F:	drivers/scsi/53c700*
 
 LED SUBSYSTEM
-P:	Richard Purdie
-M:	rpurdie@rpsys.net
+M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 F:	drivers/leds/
 F:	include/linux/leds.h
 
 LEGO USB Tower driver
-P:	Juergen Stuber
-M:	starblue@users.sourceforge.net
+M:	Juergen Stuber <starblue@users.sourceforge.net>
 L:	legousb-devel@lists.sourceforge.net
 W:	http://legousb.sourceforge.net/
 S:	Maintained
 F:	drivers/usb/misc/legousbtower.c
 
 LGUEST
-P:	Rusty Russell
-M:	rusty@rustcorp.com.au
+M:	Rusty Russell <rusty@rustcorp.com.au>
 L:	lguest@ozlabs.org
 W:	http://lguest.ozlabs.org/
 S:	Maintained
@@ -3517,119 +3071,100 @@ F:	include/linux/lguest*.h
 F:	arch/x86/include/asm/lguest*.h
 
 LINUX FOR IBM pSERIES (RS/6000)
-P:	Paul Mackerras
-M:	paulus@au.ibm.com
+M:	Paul Mackerras <paulus@au.ibm.com>
 W:	http://www.ibm.com/linux/ltc/projects/ppc
 S:	Supported
 
 LINUX FOR POWERPC (32-BIT AND 64-BIT)
-P:	Benjamin Herrenschmidt
-M:	benh@kernel.crashing.org
-P:	Paul Mackerras
-M:	paulus@samba.org
+M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
+M:	Paul Mackerras <paulus@samba.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
 S:	Supported
 
 LINUX FOR POWER MACINTOSH
-P:	Benjamin Herrenschmidt
-M:	benh@kernel.crashing.org
+M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED MPC5XXX
-P:	Grant Likely
-M:	grant.likely@secretlab.ca
+M:	Grant Likely <grant.likely@secretlab.ca>
 L:	linuxppc-dev@ozlabs.org
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC4XX
-P:	Josh Boyer
-M:	jwboyer@linux.vnet.ibm.com
-P:	Matt Porter
-M:	mporter@kernel.crashing.org
+M:	Josh Boyer <jwboyer@linux.vnet.ibm.com>
+M:	Matt Porter <mporter@kernel.crashing.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
-P:	Grant Likely
-M:	grant.likely@secretlab.ca
+M:	Grant Likely <grant.likely@secretlab.ca>
 W:	http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
 L:	linuxppc-dev@ozlabs.org
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC8XX
-P:	Vitaly Bordug
-M:	vitb@kernel.crashing.org
-P:	Marcelo Tosatti
-M:	marcelo@kvack.org
+M:	Vitaly Bordug <vitb@kernel.crashing.org>
+M:	Marcelo Tosatti <marcelo@kvack.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
-P:	Kumar Gala
-M:	galak@kernel.crashing.org
+M:	Kumar Gala <galak@kernel.crashing.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 
 LINUX FOR POWERPC PA SEMI PWRFICIENT
-P:	Olof Johansson
-M:	olof@lixom.net
+M:	Olof Johansson <olof@lixom.net>
 W:	http://www.pasemi.com/
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
 
 LINUX SECURITY MODULE (LSM) FRAMEWORK
-P:	Chris Wright
-M:	chrisw@sous-sol.org
+M:	Chris Wright <chrisw@sous-sol.org>
 L:	linux-security-module@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
 S:	Supported
 
 LLC (802.2)
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 S:	Maintained
 F:	include/linux/llc.h
 F:	include/net/llc*
 F:	net/llc/
 
 LIS3LV02D ACCELEROMETER DRIVER
-P:	Eric Piel
-M:	eric.piel@tremplin-utc.net
+M:	Eric Piel <eric.piel@tremplin-utc.net>
 S:	Maintained
 F:	Documentation/hwmon/lis3lv02d
 F:	drivers/hwmon/lis3lv02d.*
 
 LM83 HARDWARE MONITOR DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm83
 F:	drivers/hwmon/lm83.c
 
 LM90 HARDWARE MONITOR DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm90
 F:	drivers/hwmon/lm90.c
 
 LOCKDEP AND LOCKSTAT
-P:	Peter Zijlstra
-M:	peterz@infradead.org
-P:	Ingo Molnar
-M:	mingo@redhat.com
+M:	Peter Zijlstra <peterz@infradead.org>
+M:	Ingo Molnar <mingo@redhat.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
 S:	Maintained
 F:	Documentation/lockdep*.txt
@@ -3638,8 +3173,7 @@ F:	include/linux/lockdep.h
 F:	kernel/lockdep*
 
 LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
-P:	Richard Russon (FlatCap)
-M:	ldm@flatcap.org
+M:	"Richard Russon (FlatCap)" <ldm@flatcap.org>
 L:	linux-ntfs-dev@lists.sourceforge.net
 W:	http://www.linux-ntfs.org/content/view/19/37/
 S:	Maintained
@@ -3647,8 +3181,7 @@ F:	Documentation/ldm.txt
 F:	fs/partitions/ldm.*
 
 LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
-P:	Eric Moore
-M:	Eric.Moore@lsi.com
+M:	Eric Moore <Eric.Moore@lsi.com>
 M:	support@lsi.com
 L:	DL-MPTFusionLinux@lsi.com
 L:	linux-scsi@vger.kernel.org
@@ -3657,25 +3190,21 @@ S:	Supported
 F:	drivers/message/fusion/
 
 LSILOGIC/SYMBIOS/NCR 53C8XX and 53C1010 PCI-SCSI drivers
-P:	Matthew Wilcox
-M:	matthew@wil.cx
+M:	Matthew Wilcox <matthew@wil.cx>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/sym53c8xx_2/
 
 LTP (Linux Test Project)
-P:	Subrata Modak
-M:	subrata@linux.vnet.ibm.com
-P:	Mike Frysinger
-M:	vapier@gentoo.org
+M:	Subrata Modak <subrata@linux.vnet.ibm.com>
+M:	Mike Frysinger <vapier@gentoo.org>
 L:	ltp-list@lists.sourceforge.net (subscribers-only)
 W:	http://ltp.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
 S:	Maintained
 
 M32R ARCHITECTURE
-P:	Hirokazu Takata
-M:	takata@linux-m32r.org
+M:	Hirokazu Takata <takata@linux-m32r.org>
 L:	linux-m32r@ml.linux-m32r.org
 L:	linux-m32r-ja@ml.linux-m32r.org (in Japanese)
 W:	http://www.linux-m32r.org/
@@ -3683,10 +3212,8 @@ S:	Maintained
 F:	arch/m32r/
 
 M68K ARCHITECTURE
-P:	Geert Uytterhoeven
-M:	geert@linux-m68k.org
-P:	Roman Zippel
-M:	zippel@linux-m68k.org
+M:	Geert Uytterhoeven <geert@linux-m68k.org>
+M:	Roman Zippel <zippel@linux-m68k.org>
 L:	linux-m68k@lists.linux-m68k.org
 W:	http://www.linux-m68k.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git
@@ -3695,23 +3222,20 @@ F:	arch/m68k/
 F:	drivers/zorro/
 
 M68K ON APPLE MACINTOSH
-P:	Joshua Thompson
-M:	funaho@jurai.org
+M:	Joshua Thompson <funaho@jurai.org>
 W:	http://www.mac.linux-m68k.org/
 L:	linux-m68k@lists.linux-m68k.org
 S:	Maintained
 F:	arch/m68k/mac/
 
 M68K ON HP9000/300
-P:	Philip Blundell
-M:	philb@gnu.org
+M:	Philip Blundell <philb@gnu.org>
 W:	http://www.tazenda.demon.co.uk/phil/linux-hp
 S:	Maintained
 F:	arch/m68k/hp300/
 
 MAC80211
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
@@ -3721,10 +3245,8 @@ F:	include/net/mac80211.h
 F:	net/mac80211/
 
 MAC80211 PID RATE CONTROL
-P:	Stefano Brivio
-M:	stefano.brivio@polimi.it
-P:	Mattias Nissler
-M:	mattias.nissler@gmx.de
+M:	Stefano Brivio <stefano.brivio@polimi.it>
+M:	Mattias Nissler <mattias.nissler@gmx.de>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
@@ -3732,67 +3254,57 @@ S:	Maintained
 F:	net/mac80211/rc80211_pid*
 
 MACVLAN DRIVER
-P:	Patrick McHardy
-M:	kaber@trash.net
+M:	Patrick McHardy <kaber@trash.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/macvlan.c
 F:	include/linux/if_macvlan.h
 
 MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
-P:	Michael Kerrisk
-M:	mtk.manpages@gmail.com
+M:	Michael Kerrisk <mtk.manpages@gmail.com>
 W:	http://www.kernel.org/doc/man-pages
 L:	linux-man@vger.kernel.org
 S:	Maintained
 
 MARVELL LIBERTAS WIRELESS DRIVER
-P:	Dan Williams
-M:	dcbw@redhat.com
+M:	Dan Williams <dcbw@redhat.com>
 L:	libertas-dev@lists.infradead.org
 S:	Maintained
 F:	drivers/net/wireless/libertas/
 
 MARVELL MV643XX ETHERNET DRIVER
-P:	Lennert Buytenhek
-M:	buytenh@marvell.com
+M:	Lennert Buytenhek <buytenh@marvell.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/mv643xx_eth.*
 F:	include/linux/mv643xx.h
 
 MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
-P:	Nicolas Pitre
-M:	nico@cam.org
+M:	Nicolas Pitre <nico@cam.org>
 S:	Maintained
 
 MARVELL YUKON / SYSKONNECT DRIVER
-P:	Mirko Lindner
-M:	mlindner@syskonnect.de
-P:	Ralph Roesler
-M:	rroesler@syskonnect.de
+M:	Mirko Lindner <mlindner@syskonnect.de>
+M:	Ralph Roesler <rroesler@syskonnect.de>
 W:	http://www.syskonnect.com
 S:	Supported
 
 MATROX FRAMEBUFFER DRIVER
-P:	Petr Vandrovec
-M:	vandrove@vc.cvut.cz
+M:	Petr Vandrovec <vandrove@vc.cvut.cz>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/matrox/matroxfb_*
 F:	include/linux/matroxfb.h
 
 MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-P:	Hans J. Koch
-M:	hjk@linutronix.de
+M:	"Hans J. Koch" <hjk@linutronix.de>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/max6650
 F:	drivers/hwmon/max6650.c
 
 MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
-P:	Mauro Carvalho Chehab
-M:	mchehab@infradead.org
+M:	Mauro Carvalho Chehab <mchehab@infradead.org>
 P:	LinuxTV.org Project
 L:	linux-media@vger.kernel.org
 W:	http://linuxtv.org
@@ -3806,8 +3318,7 @@ F:	include/linux/dvb/
 F:	include/linux/videodev*.h
 
 MEGARAID SCSI DRIVERS
-P:	Neela Syam Kolli
-M:	megaraidlinux@lsi.com
+M:	Neela Syam Kolli <megaraidlinux@lsi.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://megaraid.lsilogic.com
 S:	Maintained
@@ -3823,19 +3334,15 @@ F:	include/linux/mm.h
 F:	mm/
 
 MEMORY RESOURCE CONTROLLER
-P:	Balbir Singh
-M:	balbir@linux.vnet.ibm.com
-P:	Pavel Emelyanov
-M:	xemul@openvz.org
-P:	KAMEZAWA Hiroyuki
-M:	kamezawa.hiroyu@jp.fujitsu.com
+M:	Balbir Singh <balbir@linux.vnet.ibm.com>
+M:	Pavel Emelyanov <xemul@openvz.org>
+M:	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/memcontrol.c
 
 MEMORY TECHNOLOGY DEVICES (MTD)
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	David Woodhouse <dwmw2@infradead.org>
 W:	http://www.linux-mtd.infradead.org/
 L:	linux-mtd@lists.infradead.org
 T:	git git://git.infradead.org/mtd-2.6.git
@@ -3845,8 +3352,7 @@ F:	include/linux/mtd/
 F:	include/mtd/
 
 MICROBLAZE ARCHITECTURE
-P:	Michal Simek
-M:	monstr@monstr.eu
+M:	Michal Simek <monstr@monstr.eu>
 L:	microblaze-uclinux@itee.uq.edu.au
 W:	http://www.monstr.eu/fdt/
 T:	git git://git.monstr.eu/linux-2.6-microblaze.git
@@ -3854,14 +3360,12 @@ S:	Supported
 F:	arch/microblaze/
 
 MICROTEK X6 SCANNER
-P:	Oliver Neukum
-M:	oliver@neukum.name
+M:	Oliver Neukum <oliver@neukum.name>
 S:	Maintained
 F:	drivers/usb/image/microtek.*
 
 MIPS
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 W:	http://www.linux-mips.org/
 L:	linux-mips@linux-mips.org
 T:	git git://git.linux-mips.org/pub/scm/linux.git
@@ -3870,8 +3374,7 @@ F:	Documentation/mips/
 F:	arch/mips/
 
 MISCELLANEOUS MCA-SUPPORT
-P:	James Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	James Bottomley <James.Bottomley@HansenPartnership.com>
 S:	Maintained
 F:	Documentation/ia64/mca.txt
 F:	Documentation/mca.txt
@@ -3879,15 +3382,13 @@ F:	drivers/mca/
 F:	include/linux/mca*
 
 MODULE SUPPORT
-P:	Rusty Russell
-M:	rusty@rustcorp.com.au
+M:	Rusty Russell <rusty@rustcorp.com.au>
 S:	Maintained
 F:	include/linux/module.h
 F:	kernel/module.c
 
 MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER
-P:	Stelian Pop
-M:	stelian@popies.net
+M:	Stelian Pop <stelian@popies.net>
 W:	http://popies.net/meye/
 S:	Maintained
 F:	Documentation/video4linux/meye.txt
@@ -3895,135 +3396,112 @@ F:	drivers/media/video/meye.*
 F:	include/linux/meye.h
 
 MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
-P:	Pavel Pisa
-M:	ppisa@pikron.com
+M:	Pavel Pisa <ppisa@pikron.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 F:	drivers/mmc/host/imxmmc.*
 
 MOUSE AND MISC DEVICES [GENERAL]
-P:	Alessandro Rubini
-M:	rubini@ipvvis.unipv.it
+M:	Alessandro Rubini <rubini@ipvvis.unipv.it>
 S:	Maintained
 F:	drivers/input/mouse/
 F:	include/linux/gpio_mouse.h
 
 MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
-P:	Jiri Slaby
-M:	jirislaby@gmail.com
+M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
 F:	Documentation/serial/moxa-smartio
 F:	drivers/char/mxser.*
 
 MSI LAPTOP SUPPORT
-P:	Lennart Poettering
-M:	mzxreary@0pointer.de
+M:	Lennart Poettering <mzxreary@0pointer.de>
 W:	https://tango.0pointer.de/mailman/listinfo/s270-linux
 W:	http://0pointer.de/lennart/tchibo.html
 S:	Maintained
 F:	drivers/platform/x86/msi-laptop.c
 
 MULTIFUNCTION DEVICES (MFD)
-P:	Samuel Ortiz
-M:	sameo@linux.intel.com
+M:	Samuel Ortiz <sameo@linux.intel.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git
 S:	Supported
 F:	drivers/mfd/
 
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
-P:	Pierre Ossman
-M:	pierre@ossman.eu
-S:	Maintained
+S:	Orphan
+L:	linux-mmc@vger.kernel.org
 F:	drivers/mmc/
 F:	include/linux/mmc/
 
 MULTIMEDIA CARD (MMC) ETC. OVER SPI
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 S:	Odd Fixes
 F:	drivers/mmc/host/mmc_spi.c
 F:	include/linux/spi/mmc_spi.h
 
 MULTISOUND SOUND DRIVER
-P:	Andrew Veliath
-M:	andrewtv@usa.net
+M:	Andrew Veliath <andrewtv@usa.net>
 S:	Maintained
 F:	Documentation/sound/oss/MultiSound
 F:	sound/oss/msnd*
 
 MULTITECH MULTIPORT CARD (ISICOM)
-P:	Jiri Slaby
-M:	jirislaby@gmail.com
+M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
 F:	drivers/char/isicom.c
 F:	include/linux/isicom.h
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-P:	Felipe Balbi
-M:	felipe.balbi@nokia.com
+M:	Felipe Balbi <felipe.balbi@nokia.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://gitorious.org/musb/mainline.git
 S:	Maintained
 F:	drivers/usb/musb/
 
 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
-P:	Andrew Gallatin
-M:	gallatin@myri.com
-P:	Brice Goglin
-M:	brice@myri.com
+M:	Andrew Gallatin <gallatin@myri.com>
+M:	Brice Goglin <brice@myri.com>
 L:	netdev@vger.kernel.org
 W:	http://www.myri.com/scs/download-Myri10GE.html
 S:	Supported
 F:	drivers/net/myri10ge/
 
 NATSEMI ETHERNET DRIVER (DP8381x)
-P:	Tim Hockin
-M:	thockin@hockin.org
+M:	Tim Hockin <thockin@hockin.org>
 S:	Maintained
 F:	drivers/net/natsemi.c
 
 NCP FILESYSTEM
-P:	Petr Vandrovec
-M:	vandrove@vc.cvut.cz
+M:	Petr Vandrovec <vandrove@vc.cvut.cz>
 L:	linware@sh.cvut.cz
 S:	Maintained
 F:	fs/ncpfs/
 
 NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
-P:	James E.J. Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/NCR_D700.*
 
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
-P:	Faisal Latif
-M:	faisal.latif@intel.com
-P:	Chien Tung
-M:	chien.tin.tung@intel.com
+M:	Faisal Latif <faisal.latif@intel.com>
+M:	Chien Tung <chien.tin.tung@intel.com>
 L:	general@lists.openfabrics.org
 W:	http://www.neteffect.com
 S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-P:	Stephen Hemminger
-M:	shemminger@linux-foundation.org
+M:	Stephen Hemminger <shemminger@linux-foundation.org>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
 
 NETERION (S2IO) 10GbE DRIVER (xframe/vxge)
-P:	Ramkrishna Vepa
-M:	ram.vepa@neterion.com
-P:	Rastapur Santosh
-M:	santosh.rastapur@neterion.com
-P:	Sivakumar Subramani
-M:	sivakumar.subramani@neterion.com
-P:	Sreenivasa Honnur
-M:	sreenivasa.honnur@neterion.com
-P:	Anil Murthy
-M:	anil.murthy@neterion.com
+M:	Ramkrishna Vepa <ram.vepa@neterion.com>
+M:	Rastapur Santosh <santosh.rastapur@neterion.com>
+M:	Sivakumar Subramani <sivakumar.subramani@neterion.com>
+M:	Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
+M:	Anil Murthy <anil.murthy@neterion.com>
 L:	netdev@vger.kernel.org
 W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
 W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
@@ -4037,13 +3515,13 @@ P:	Marc Boucher
 P:	James Morris
 P:	Harald Welte
 P:	Jozsef Kadlecsik
-P:	Patrick McHardy
-M:	kaber@trash.net
+M:	Patrick McHardy <kaber@trash.net>
 L:	netfilter-devel@vger.kernel.org
 L:	netfilter@vger.kernel.org
 L:	coreteam@netfilter.org
 W:	http://www.netfilter.org/
 W:	http://www.iptables.org/
+T:	git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
 S:	Supported
 F:	include/linux/netfilter*
 F:	include/linux/netfilter/
@@ -4053,8 +3531,7 @@ F:	net/*/netfilter/
 F:	net/netfilter/
 
 NETLABEL
-P:	Paul Moore
-M:	paul.moore@hp.com
+M:	Paul Moore <paul.moore@hp.com>
 W:	http://netlabel.sf.net
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -4063,8 +3540,7 @@ F:	include/net/netlabel.h
 F:	net/netlabel/
 
 NETROM NETWORK LAYER
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
@@ -4073,36 +3549,31 @@ F:	include/net/netrom.h
 F:	net/netrom/
 
 NETWORK BLOCK DEVICE (NBD)
-P:	Paul Clements
-M:	Paul.Clements@steeleye.com
+M:	Paul Clements <Paul.Clements@steeleye.com>
 S:	Maintained
 F:	Documentation/blockdev/nbd.txt
 F:	drivers/block/nbd.c
 F:	include/linux/nbd.h
 
 NETWORKING [GENERAL]
-P:	David S. Miller
-M:	davem@davemloft.net
+M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Maintained
 F:	net/
 F:	include/net/
+F:	include/linux/in.h
+F:	include/linux/net.h
+F:	include/linux/netdevice.h
 
 NETWORKING [IPv4/IPv6]
-P:	David S. Miller
-M:	davem@davemloft.net
-P:	Alexey Kuznetsov
-M:	kuznet@ms2.inr.ac.ru
-P:	Pekka Savola (ipv6)
-M:	pekkas@netcore.fi
-P:	James Morris
-M:	jmorris@namei.org
-P:	Hideaki YOSHIFUJI
-M:	yoshfuji@linux-ipv6.org
-P:	Patrick McHardy
-M:	kaber@trash.net
+M:	"David S. Miller" <davem@davemloft.net>
+M:	Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
+M:	"Pekka Savola (ipv6)" <pekkas@netcore.fi>
+M:	James Morris <jmorris@namei.org>
+M:	Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
+M:	Patrick McHardy <kaber@trash.net>
 L:	netdev@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Maintained
@@ -4111,14 +3582,12 @@ F:	net/ipv6/
 F:	include/net/ip*
 
 NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
-P:	Paul Moore
-M:	paul.moore@hp.com
+M:	Paul Moore <paul.moore@hp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 
 NETWORKING [WIRELESS]
-P:	John W. Linville
-M:	linville@tuxdriver.com
+M:	"John W. Linville" <linville@tuxdriver.com>
 L:	linux-wireless@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
 S:	Maintained
@@ -4132,18 +3601,18 @@ W:	http://www.linuxfoundation.org/en/Net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Odd Fixes
 F:	drivers/net/
+F:	include/linux/if_*
+F:	include/linux/*device.h
 
 NETXEN (1/10) GbE SUPPORT
-P:	Dhananjay Phadke
-M:	dhananjay@netxen.com
+M:	Dhananjay Phadke <dhananjay@netxen.com>
 L:	netdev@vger.kernel.org
 W:	http://www.netxen.com
 S:	Supported
 F:	drivers/net/netxen/
 
 NFS, SUNRPC, AND LOCKD CLIENTS
-P:	Trond Myklebust
-M:	Trond.Myklebust@netapp.com
+M:	Trond Myklebust <Trond.Myklebust@netapp.com>
 L:	linux-nfs@vger.kernel.org
 W:	http://client.linux-nfs.org
 T:	git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
@@ -4157,17 +3626,14 @@ F:	include/linux/nfs*
 F:	include/linux/sunrpc/
 
 NI5010 NETWORK DRIVER
-P:	Jan-Pascal van Best
-M:	janpascal@vanbest.org
-P:	Andreas Mohr
-M:	andi@lisas.de
+M:	Jan-Pascal van Best <janpascal@vanbest.org>
+M:	Andreas Mohr <andi@lisas.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ni5010.*
 
 NILFS2 FILESYSTEM
-P:	KONISHI Ryusuke
-M:	konishi.ryusuke@lab.ntt.co.jp
+M:	KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
 L:	users@nilfs.org
 W:	http://www.nilfs.org/en/
 S:	Supported
@@ -4176,26 +3642,22 @@ F:	fs/nilfs2/
 F:	include/linux/nilfs2_fs.h
 
 NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER
-P:	YOKOTA Hiroshi
-M:	yokota@netlab.is.tsukuba.ac.jp
+M:	YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
 W:	http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
 S:	Maintained
 F:	Documentation/scsi/NinjaSCSI.txt
 F:	drivers/scsi/pcmcia/nsp_*
 
 NINJA SCSI-32Bi/UDE PCI/CARDBUS SCSI HOST ADAPTER DRIVER
-P:	GOTO Masanori
-M:	gotom@debian.or.jp
-P:	YOKOTA Hiroshi
-M:	yokota@netlab.is.tsukuba.ac.jp
+M:	GOTO Masanori <gotom@debian.or.jp>
+M:	YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
 W:	http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
 S:	Maintained
 F:	Documentation/scsi/NinjaSCSI.txt
 F:	drivers/scsi/nsp32*
 
 NTFS FILESYSTEM
-P:	Anton Altaparmakov
-M:	aia21@cantab.net
+M:	Anton Altaparmakov <aia21@cantab.net>
 L:	linux-ntfs-dev@lists.sourceforge.net
 W:	http://www.linux-ntfs.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
@@ -4204,16 +3666,14 @@ F:	Documentation/filesystems/ntfs.txt
 F:	fs/ntfs/
 
 NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER
-P:	Antonino Daplas
-M:	adaplas@gmail.com
+M:	Antonino Daplas <adaplas@gmail.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
 OMAP SUPPORT
-P:	Tony Lindgren <tony@atomide.com>
-M:	tony@atomide.com
+M:	"Tony Lindgren <tony@atomide.com>" <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 W:	http://www.muru.com/linux/omap/
 W:	http://linux.omap.com/
@@ -4222,98 +3682,83 @@ S:	Maintained
 F:	arch/arm/*omap*
 
 OMAP CLOCK FRAMEWORK SUPPORT
-P:	Paul Walmsley
-M:	paul@pwsan.com
+M:	Paul Walmsley <paul@pwsan.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/*omap*/*clock*
 
 OMAP POWER MANAGEMENT SUPPORT
-P:	Kevin Hilman
-M:	khilman@deeprootsystems.com
+M:	Kevin Hilman <khilman@deeprootsystems.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/*omap*/*pm*
 
 OMAP AUDIO SUPPORT
-P:	Jarkko Nikula
-M:	jhnikula@gmail.com
+M:	Jarkko Nikula <jhnikula@gmail.com>
 L:	alsa-devel@alsa-project.org (subscribers-only)
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	sound/soc/omap/
 
 OMAP FRAMEBUFFER SUPPORT
-P:	Imre Deak
-M:	imre.deak@nokia.com
+M:	Imre Deak <imre.deak@nokia.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/video/omap/
 
 OMAP MMC SUPPORT
-P:	Jarkko Lavinen
-M:	jarkko.lavinen@nokia.com
-L:	linux-kernel@vger.kernel.org
+M:	Jarkko Lavinen <jarkko.lavinen@nokia.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/host/*omap*
 
 OMAP RANDOM NUMBER GENERATOR SUPPORT
-P:	Deepak Saxena
-M:	dsaxena@plexity.net
+M:	Deepak Saxena <dsaxena@plexity.net>
 S:	Maintained
 F:	drivers/char/hw_random/omap-rng.c
 
 OMAP USB SUPPORT
-P:	Felipe Balbi
-M:	felipe.balbi@nokia.com
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	Felipe Balbi <felipe.balbi@nokia.com>
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 
 OMFS FILESYSTEM
-P:	Bob Copeland
-M:	me@bobcopeland.com
+M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-karma-devel@lists.sourceforge.net
 S:	Maintained
 F:	Documentation/filesystems/omfs.txt
 F:	fs/omfs/
 
 OMNIKEY CARDMAN 4000 DRIVER
-P:	Harald Welte
-M:	laforge@gnumonks.org
+M:	Harald Welte <laforge@gnumonks.org>
 S:	Maintained
 F:	drivers/char/pcmcia/cm4000_cs.c
 F:	include/linux/cm4000_cs.h
 
 OMNIKEY CARDMAN 4040 DRIVER
-P:	Harald Welte
-M:	laforge@gnumonks.org
+M:	Harald Welte <laforge@gnumonks.org>
 S:	Maintained
 F:	drivers/char/pcmcia/cm4040_cs.*
 
 OMNIVISION OV7670 SENSOR DRIVER
-P:	Jonathan Corbet
-M:	corbet@lwn.net
+M:	Jonathan Corbet <corbet@lwn.net>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/ov7670.c
 
 ONENAND FLASH DRIVER
-P:	Kyungmin Park
-M:	kyungmin.park@samsung.com
+M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/onenand/
 F:	include/linux/mtd/onenand*.h
 
 ONSTREAM SCSI TAPE DRIVER
-P:	Willem Riede
-M:	osst@riede.org
+M:	Willem Riede <osst@riede.org>
 L:	osst-users@lists.sourceforge.net
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
@@ -4321,16 +3766,14 @@ F:	drivers/scsi/osst*
 F:	drivers/scsi/st*
 
 OPENCORES I2C BUS DRIVER
-P:	Peter Korsgaard
-M:	jacmet@sunsite.dk
+M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-ocores
 F:	drivers/i2c/busses/i2c-ocores.c
 
 OPROFILE
-P:	Robert Richter
-M:	robert.richter@amd.com
+M:	Robert Richter <robert.richter@amd.com>
 L:	oprofile-list@lists.sf.net
 S:	Maintained
 F:	arch/*/oprofile/
@@ -4338,10 +3781,8 @@ F:	drivers/oprofile/
 F:	include/linux/oprofile.h
 
 ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
-P:	Mark Fasheh
-M:	mfasheh@suse.com
-P:	Joel Becker
-M:	joel.becker@oracle.com
+M:	Mark Fasheh <mfasheh@suse.com>
+M:	Joel Becker <joel.becker@oracle.com>
 L:	ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
 W:	http://oss.oracle.com/projects/ocfs2/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
@@ -4351,10 +3792,8 @@ F:	Documentation/filesystems/dlmfs.txt
 F:	fs/ocfs2/
 
 ORINOCO DRIVER
-P:	Pavel Roskin
-M:	proski@gnu.org
-P:	David Gibson
-M:	hermes@gibson.dropbear.id.au
+M:	Pavel Roskin <proski@gnu.org>
+M:	David Gibson <hermes@gibson.dropbear.id.au>
 L:	linux-wireless@vger.kernel.org
 L:	orinoco-users@lists.sourceforge.net
 L:	orinoco-devel@lists.sourceforge.net
@@ -4362,19 +3801,19 @@ W:	http://www.nongnu.org/orinoco/
 S:	Maintained
 F:	drivers/net/wireless/orinoco/
 
-OSD LIBRARY
-P:	Boaz Harrosh
-M:	bharrosh@panasas.com
-P:	Benny Halevy
-M:	bhalevy@panasas.com
+OSD LIBRARY and FILESYSTEM
+M:	Boaz Harrosh <bharrosh@panasas.com>
+M:	Benny Halevy <bhalevy@panasas.com>
 L:	osd-dev@open-osd.org
 W:	http://open-osd.org
 T:	git git://git.open-osd.org/open-osd.git
 S:	Maintained
+F:	drivers/scsi/osd/
+F:	include/scsi/osd_*
+F:	fs/exofs/
 
 P54 WIRELESS DRIVER
-P:	Michael Wu
-M:	flamingice@sourmilk.net
+M:	Michael Wu <flamingice@sourmilk.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://prism54.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
@@ -4382,30 +3821,25 @@ S:	Maintained
 F:	drivers/net/wireless/p54/
 
 PA SEMI ETHERNET DRIVER
-P:	Olof Johansson
-M:	olof@lixom.net
+M:	Olof Johansson <olof@lixom.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/pasemi_mac.*
 
 PA SEMI SMBUS DRIVER
-P:	Olof Johansson
-M:	olof@lixom.net
+M:	Olof Johansson <olof@lixom.net>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-pasemi.c
 
 PANASONIC LAPTOP ACPI EXTRAS DRIVER
-P:	Harald Welte
-M:	laforge@gnumonks.org
+M:	Harald Welte <laforge@gnumonks.org>
 S:	Maintained
 F:	drivers/platform/x86/panasonic-laptop.c
 
 PANASONIC MN10300/AM33 PORT
-P:	David Howells
-M:	dhowells@redhat.com
-P:	Koichi Yasutake
-M:	yasutake.koichi@jp.panasonic.com
+M:	David Howells <dhowells@redhat.com>
+M:	Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
 L:	linux-am33-list@redhat.com (moderated for non-subscribers)
 W:	ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
 S:	Maintained
@@ -4421,14 +3855,10 @@ F:	drivers/char/ppdev.c
 F:	include/linux/ppdev.h
 
 PARAVIRT_OPS INTERFACE
-P:	Jeremy Fitzhardinge
-M:	jeremy@xensource.com
-P:	Chris Wright
-M:	chrisw@sous-sol.org
-P:	Alok Kataria
-M:	akataria@vmware.com
-P:	Rusty Russell
-M:	rusty@rustcorp.com.au
+M:	Jeremy Fitzhardinge <jeremy@xensource.com>
+M:	Chris Wright <chrisw@sous-sol.org>
+M:	Alok Kataria <akataria@vmware.com>
+M:	Rusty Russell <rusty@rustcorp.com.au>
 L:	virtualization@lists.osdl.org
 S:	Supported
 F:	Documentation/ia64/paravirt_ops.txt
@@ -4436,8 +3866,7 @@ F:	arch/*/kernel/paravirt*
 F:	arch/*/include/asm/paravirt.h
 
 PARIDE DRIVERS FOR PARALLEL PORT IDE DEVICES
-P:	Tim Waugh
-M:	tim@cyberelk.net
+M:	Tim Waugh <tim@cyberelk.net>
 L:	linux-parport@lists.infradead.org (subscribers-only)
 W:	http://www.torque.net/linux-pp.html
 S:	Maintained
@@ -4445,10 +3874,8 @@ F:	Documentation/blockdev/paride.txt
 F:	drivers/block/paride/
 
 PARISC ARCHITECTURE
-P:	Kyle McMartin
-M:	kyle@mcmartin.ca
-P:	Helge Deller
-M:	deller@gmx.de
+M:	Kyle McMartin <kyle@mcmartin.ca>
+M:	Helge Deller <deller@gmx.de>
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
@@ -4457,37 +3884,32 @@ F:	arch/parisc/
 F:	drivers/parisc/
 
 PC87360 HARDWARE MONITORING DRIVER
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/pc87360
 F:	drivers/hwmon/pc87360.c
 
 PC8736x GPIO DRIVER
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 S:	Maintained
 F:	drivers/char/pc8736x_gpio.c
 
 PCA9532 LED DRIVER
-P:	Riku Voipio
-M:	riku.voipio@iki.fi
+M:	Riku Voipio <riku.voipio@iki.fi>
 S:	Maintained
 F:	drivers/leds/leds-pca9532.c
 F:	include/linux/leds-pca9532.h
 
 PCI ERROR RECOVERY
-P:	Linas Vepstas
-M:	linas@austin.ibm.com
+M:	Linas Vepstas <linas@austin.ibm.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	Documentation/PCI/pci-error-recovery.txt
 F:	Documentation/powerpc/eeh-pci-error-recovery.txt
 
 PCI SUBSYSTEM
-P:	Jesse Barnes
-M:	jbarnes@virtuousgeek.org
+M:	Jesse Barnes <jbarnes@virtuousgeek.org>
 L:	linux-pci@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
 S:	Supported
@@ -4496,8 +3918,7 @@ F:	drivers/pci/
 F:	include/linux/pci*
 
 PCIE HOTPLUG DRIVER
-P:	Kristen Carlson Accardi
-M:	kristen.c.accardi@intel.com
+M:	Kristen Carlson Accardi <kristen.c.accardi@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	drivers/pci/pcie/
@@ -4513,121 +3934,103 @@ F:	drivers/pcmcia/
 F:	include/pcmcia/
 
 PCNET32 NETWORK DRIVER
-P:	Don Fry
-M:	pcnet32@verizon.net
+M:	Don Fry <pcnet32@verizon.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/pcnet32.c
 
 PER-TASK DELAY ACCOUNTING
-P:	Balbir Singh
-M:	balbir@linux.vnet.ibm.com
+M:	Balbir Singh <balbir@linux.vnet.ibm.com>
 S:	Maintained
 F:	include/linux/delayacct.h
 F:	kernel/delayacct.c
 
 PERFORMANCE COUNTER SUBSYSTEM
-P:	Peter Zijlstra
-M:	a.p.zijlstra@chello.nl
-P:	Paul Mackerras
-M:	paulus@samba.org
-P:	Ingo Molnar
-M:	mingo@elte.hu
-L:	linux-kernel@vger.kernel.org
+M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+M:	Paul Mackerras <paulus@samba.org>
+M:	Ingo Molnar <mingo@elte.hu>
 S:	Supported
 
 PERSONALITY HANDLING
-P:	Christoph Hellwig
-M:	hch@infradead.org
+M:	Christoph Hellwig <hch@infradead.org>
 L:	linux-abi-devel@lists.sourceforge.net
 S:	Maintained
 F:	include/linux/personality.h
 
 PHRAM MTD DRIVER
-P:	Joern Engel
-M:	joern@lazybastard.org
+M:	Joern Engel <joern@lazybastard.org>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/devices/phram.c
 
 PKTCDVD DRIVER
-P:	Peter Osterlund
-M:	petero2@telia.com
+M:	Peter Osterlund <petero2@telia.com>
 S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h
 
 POSIX CLOCKS and TIMERS
-P:	Thomas Gleixner
-M:	tglx@linutronix.de
+M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Supported
 F:	fs/timerfd.c
 F:	include/linux/timer*
 F:	kernel/*timer*
 
 POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
-P:	Anton Vorontsov
-M:	cbou@mail.ru
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	Anton Vorontsov <cbou@mail.ru>
+M:	David Woodhouse <dwmw2@infradead.org>
 T:	git git://git.infradead.org/battery-2.6.git
 S:	Maintained
 F:	include/linux/power_supply.h
 F:	drivers/power/power_supply*
 
 PNP SUPPORT
-P:	Adam Belay
-M:	abelay@mit.edu
-P:	Bjorn Helgaas
-M:	bjorn.helgaas@hp.com
+M:	Adam Belay <abelay@mit.edu>
+M:	Bjorn Helgaas <bjorn.helgaas@hp.com>
 S:	Maintained
 F:	drivers/pnp/
 
 PNXxxxx I2C DRIVER
-P:	Vitaly Wool
-M:	vitalywool@gmail.com
+M:	Vitaly Wool <vitalywool@gmail.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-pnx.c
 
 PPP PROTOCOL DRIVERS AND COMPRESSORS
-P:	Paul Mackerras
-M:	paulus@samba.org
+M:	Paul Mackerras <paulus@samba.org>
 L:	linux-ppp@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ppp_*
 
 PPP OVER ATM (RFC 2364)
-P:	Mitchell Blank Jr
-M:	mitch@sfgoth.com
+M:	Mitchell Blank Jr <mitch@sfgoth.com>
 S:	Maintained
 F:	net/atm/pppoatm.c
 F:	include/linux/atmppp.h
 
 PPP OVER ETHERNET
-P:	Michal Ostrowski
-M:	mostrows@earthlink.net
+M:	Michal Ostrowski <mostrows@earthlink.net>
 S:	Maintained
 F:	drivers/net/pppoe.c
 F:	drivers/net/pppox.c
 
 PPP OVER L2TP
-P:	James Chapman
-M:	jchapman@katalix.com
+M:	James Chapman <jchapman@katalix.com>
 S:	Maintained
 F:	drivers/net/pppol2tp.c
 F:	include/linux/if_pppol2tp.h
 
 PPS SUPPORT
-P:	Rodolfo Giometti
-M:	giometti@enneenne.com
+M:	Rodolfo Giometti <giometti@enneenne.com>
 W:	http://wiki.enneenne.com/index.php/LinuxPPS_support
 L:	linuxpps@ml.enneenne.com (subscribers-only)
 S:	Maintained
+F:	Documentation/pps/
+F:	drivers/pps/
+F:	include/linux/pps*.h
 
 PREEMPTIBLE KERNEL
-P:	Robert Love
-M:	rml@tech9.net
+M:	Robert Love <rml@tech9.net>
 L:	kpreempt-tech@lists.sourceforge.net
 W:	ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel
 S:	Supported
@@ -4635,37 +4038,32 @@ F:	Documentation/preempt-locking.txt
 F:	include/linux/preempt.h
 
 PRISM54 WIRELESS DRIVER
-P:	Luis R. Rodriguez
-M:	mcgrof@gmail.com
+M:	"Luis R. Rodriguez" <mcgrof@gmail.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://prism54.org
 S:	Maintained
 F:	drivers/net/wireless/prism54/
 
 PROMISE DC4030 CACHING DISK CONTROLLER DRIVER
-P:	Peter Denison
-M:	promise@pnd-pc.demon.co.uk
+M:	Peter Denison <promise@pnd-pc.demon.co.uk>
 W:	http://www.pnd-pc.demon.co.uk/promise/
 S:	Maintained
 
 PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
-P:	Mikael Pettersson
-M:	mikpe@it.uu.se
+M:	Mikael Pettersson <mikpe@it.uu.se>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	drivers/ata/sata_promise.*
 
 PS3 NETWORK SUPPORT
-P:	Geoff Levand
-M:	geoffrey.levand@am.sony.com
+M:	Geoff Levand <geoffrey.levand@am.sony.com>
 L:	netdev@vger.kernel.org
 L:	cbe-oss-dev@ozlabs.org
 S:	Supported
 F:	drivers/net/ps3_gelic_net.*
 
 PS3 PLATFORM SUPPORT
-P:	Geoff Levand
-M:	geoffrey.levand@am.sony.com
+M:	Geoff Levand <geoffrey.levand@am.sony.com>
 L:	linuxppc-dev@ozlabs.org
 L:	cbe-oss-dev@ozlabs.org
 S:	Supported
@@ -4680,16 +4078,13 @@ F:	drivers/usb/host/*ps3.c
 F:	sound/ppc/snd_ps3*
 
 PS3VRAM DRIVER
-P:	Jim Paris
-M:	jim@jtan.com
+M:	Jim Paris <jim@jtan.com>
 L:	cbe-oss-dev@ozlabs.org
 S:	Maintained
 
 PTRACE SUPPORT
-P:	Roland McGrath
-M:	roland@redhat.com
-P:	Oleg Nesterov
-M:	oleg@redhat.com
+M:	Roland McGrath <roland@redhat.com>
+M:	Oleg Nesterov <oleg@redhat.com>
 S:	Maintained
 F:	include/asm-generic/syscall.h
 F:	include/linux/ptrace.h
@@ -4698,8 +4093,7 @@ F:	include/linux/tracehook.h
 F:	kernel/ptrace.c
 
 PVRUSB2 VIDEO4LINUX DRIVER
-P:	Mike Isely
-M:	isely@pobox.com
+M:	Mike Isely <isely@pobox.com>
 L:	pvrusb2@isely.net	(subscribers-only)
 L:	linux-media@vger.kernel.org
 W:	http://www.isely.net/pvrusb2/
@@ -4709,10 +4103,8 @@ F:	Documentation/video4linux/README.pvrusb2
 F:	drivers/media/video/pvrusb2/
 
 PXA2xx/PXA3xx SUPPORT
-P:	Eric Miao
-M:	eric.y.miao@gmail.com
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Eric Miao <eric.y.miao@gmail.com>
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 S:	Maintained
 F:	arch/arm/mach-pxa/
@@ -4724,17 +4116,14 @@ F:	sound/arm/pxa*
 F:	sound/soc/pxa
 
 PXA168 SUPPORT
-P:	Eric Miao
-M:	eric.y.miao@gmail.com
-P:	Jason Chagas
-M:	jason.chagas@marvell.com
+M:	Eric Miao <eric.y.miao@gmail.com>
+M:	Jason Chagas <jason.chagas@marvell.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
 S:	Maintained
 
 PXA910 SUPPORT
-P:	Eric Miao
-M:	eric.y.miao@gmail.com
+M:	Eric Miao <eric.y.miao@gmail.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
 S:	Maintained
@@ -4743,13 +4132,12 @@ PXA MMCI DRIVER
 S:	Orphan
 
 PXA RTC DRIVER
-P:	Robert Jarzmik
-M:	robert.jarzmik@free.fr
+M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	rtc-linux@googlegroups.com
 S:	Maintained
 
 QLOGIC QLA2XXX FC-SCSI DRIVER
-P:	Andrew Vasquez
+M:	Andrew Vasquez <andrew.vasquez@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
@@ -4757,7 +4145,7 @@ F:	Documentation/scsi/LICENSE.qla2xxx
 F:	drivers/scsi/qla2xxx/
 
 QLOGIC QLA3XXX NETWORK DRIVER
-P:	Ron Mercer
+M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -4765,16 +4153,14 @@ F:	Documentation/networking/LICENSE.qla3xxx
 F:	drivers/net/qla3xxx.*
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
-P:	Ron Mercer
+M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
-M:	ron.mercer@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/qlge/
 
 QNX4 FILESYSTEM
-P:	Anders Larsen
-M:	al@alarsen.net
+M:	Anders Larsen <al@alarsen.net>
 W:	http://www.alarsen.net/linux/qnx4fs/
 S:	Maintained
 F:	fs/qnx4/
@@ -4782,16 +4168,14 @@ F:	include/linux/qnx4_fs.h
 F:	include/linux/qnxtypes.h
 
 RADEON FRAMEBUFFER DISPLAY DRIVER
-P:	Benjamin Herrenschmidt
-M:	benh@kernel.crashing.org
+M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/aty/radeon*
 F:	include/linux/radeonfb.h
 
 RAGE128 FRAMEBUFFER DISPLAY DRIVER
-P:	Paul Mackerras
-M:	paulus@samba.org
+M:	Paul Mackerras <paulus@samba.org>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/aty/aty128fb.c
@@ -4806,64 +4190,53 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git
 F:	drivers/net/wireless/rt2x00/
 
 RAMDISK RAM BLOCK DEVICE DRIVER
-P:	Nick Piggin
-M:	npiggin@suse.de
+M:	Nick Piggin <npiggin@suse.de>
 S:	Maintained
 F:	Documentation/blockdev/ramdisk.txt
 F:	drivers/block/brd.c
 
 RANDOM NUMBER DRIVER
-P:	Matt Mackall
-M:	mpm@selenic.com
+M:	Matt Mackall <mpm@selenic.com>
 S:	Maintained
 F:	drivers/char/random.c
 
 RAPIDIO SUBSYSTEM
-P:	Matt Porter
-M:	mporter@kernel.crashing.org
+M:	Matt Porter <mporter@kernel.crashing.org>
 S:	Maintained
 F:	drivers/rapidio/
 
 RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
-P:	Corey Thomas
-M:	coreythomas@charter.net
+M:	Corey Thomas <coreythomas@charter.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/ray*
 
 RCUTORTURE MODULE
-P:	Josh Triplett
-M:	josh@freedesktop.org
-P:	Paul E. McKenney
-M:	paulmck@linux.vnet.ibm.com
+M:	Josh Triplett <josh@freedesktop.org>
+M:	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 S:	Maintained
 F:	Documentation/RCU/torture.txt
 F:	kernel/rcutorture.c
 
 RDC R-321X SoC
-P:	Florian Fainelli
-M:	florian@openwrt.org
+M:	Florian Fainelli <florian@openwrt.org>
 S:	Maintained
 
 RDC R6040 FAST ETHERNET DRIVER
-P:	Florian Fainelli
-M:	florian@openwrt.org
+M:	Florian Fainelli <florian@openwrt.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/r6040.c
 
 RDS - RELIABLE DATAGRAM SOCKETS
-P:	Andy Grover
-M:	andy.grover@oracle.com
+M:	Andy Grover <andy.grover@oracle.com>
 L:	rds-devel@oss.oracle.com (moderated for non-subscribers)
 S:	Supported
 F:	net/rds/
 
 READ-COPY UPDATE (RCU)
-P:	Dipankar Sarma
-M:	dipankar@in.ibm.com
-P:	Paul E. McKenney
-M:	paulmck@linux.vnet.ibm.com
+M:	Dipankar Sarma <dipankar@in.ibm.com>
+M:	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 W:	http://www.rdrop.com/users/paulmck/rclock/
 S:	Supported
 F:	Documentation/RCU/rcu.txt
@@ -4873,16 +4246,14 @@ F:	include/linux/srcu.h
 F:	kernel/rcupdate.c
 
 REAL TIME CLOCK DRIVER
-P:	Paul Gortmaker
-M:	p_gortmaker@yahoo.com
+M:	Paul Gortmaker <p_gortmaker@yahoo.com>
 S:	Maintained
 F:	Documentation/rtc.txt
 F:	drivers/rtc/
 F:	include/linux/rtc.h
 
 REAL TIME CLOCK (RTC) SUBSYSTEM
-P:	Alessandro Zummo
-M:	a.zummo@towertech.it
+M:	Alessandro Zummo <a.zummo@towertech.it>
 L:	rtc-linux@googlegroups.com
 S:	Maintained
 F:	Documentation/rtc.txt
@@ -4895,8 +4266,7 @@ S:	Supported
 F:	fs/reiserfs/
 
 RFKILL
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F	Documentation/rfkill.txt
@@ -4915,8 +4285,7 @@ F:	Documentation/serial/rocket.txt
 F:	drivers/char/rocket*
 
 ROSE NETWORK LAYER
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
@@ -4925,8 +4294,7 @@ F:	include/net/rose.h
 F:	net/rose/
 
 RTL8180 WIRELESS DRIVER
-P:	John W. Linville
-M:	linville@tuxdriver.com
+M:	"John W. Linville" <linville@tuxdriver.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
@@ -4934,12 +4302,9 @@ S:	Maintained
 F:	drivers/net/wireless/rtl818*
 
 RTL8187 WIRELESS DRIVER
-P:	Herton Ronaldo Krzesinski
-M:	herton@mandriva.com.br
-P:	Hin-Tak Leung
-M:	htl10@users.sourceforge.net
-P:	Larry Finger
-M:	Larry.Finger@lwfinger.net
+M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M:	Hin-Tak Leung <htl10@users.sourceforge.net>
+M:	Larry Finger <Larry.Finger@lwfinger.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
@@ -4947,17 +4312,14 @@ S:	Maintained
 F:	drivers/net/wireless/rtl818x/rtl8187*
 
 S3 SAVAGE FRAMEBUFFER DRIVER
-P:	Antonino Daplas
-M:	adaplas@gmail.com
+M:	Antonino Daplas <adaplas@gmail.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/savage/
 
 S390
-P:	Martin Schwidefsky
-M:	schwidefsky@de.ibm.com
-P:	Heiko Carstens
-M:	heiko.carstens@de.ibm.com
+M:	Martin Schwidefsky <schwidefsky@de.ibm.com>
+M:	Heiko Carstens <heiko.carstens@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -4965,10 +4327,8 @@ S:	Supported
 F:	arch/s390/
 
 S390 NETWORK DRIVERS
-P:	Ursula Braun
-M:	ursula.braun@de.ibm.com
-P:	Frank Blaschka
-M:	blaschka@linux.vnet.ibm.com
+M:	Ursula Braun <ursula.braun@de.ibm.com>
+M:	Frank Blaschka <blaschka@linux.vnet.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -4976,20 +4336,16 @@ S:	Supported
 F:	drivers/s390/net/
 
 S390 ZCRYPT DRIVER
-P:	Felix Beck
-M:	felix.beck@de.ibm.com
-P:	Ralph Wuerthner
-M:	ralph.wuerthner@de.ibm.com
+M:	Felix Beck <felix.beck@de.ibm.com>
+M:	Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 S:	Supported
 F:	drivers/s390/crypto/
 
 S390 ZFCP DRIVER
-P:	Christof Schmitt
-M:	christof.schmitt@de.ibm.com
-P:	Martin Peschke
-M:	mp3@de.ibm.com
+M:	Christof Schmitt <christof.schmitt@de.ibm.com>
+M:	Martin Peschke <mp3@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -4998,8 +4354,7 @@ F:	Documentation/s390/zfcpdump.txt
 F:	drivers/s390/scsi/zfcp_*
 
 S390 IUCV NETWORK LAYER
-P:	Ursula Braun
-M:	ursula.braun@de.ibm.com
+M:	Ursula Braun <ursula.braun@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -5009,15 +4364,13 @@ F:	include/net/iucv/
 F:	net/iucv/
 
 S3C24XX SD/MMC Driver
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 F:	drivers/mmc/host/s3cmci.*
 
 SAA7146 VIDEO4LINUX-2 DRIVER
-P:	Michael Hunold
-M:	michael@mihu.de
+M:	Michael Hunold <michael@mihu.de>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://www.mihu.de/linux/saa7146
@@ -5027,31 +4380,26 @@ F:	drivers/media/video/*7146*
 F:	include/media/*7146*
 
 SC1200 WDT DRIVER
-P:	Zwane Mwaikambo
-M:	zwane@arm.linux.org.uk
+M:	Zwane Mwaikambo <zwane@arm.linux.org.uk>
 S:	Maintained
 F:	drivers/watchdog/sc1200wdt.c
 
 SCHEDULER
-P:	Ingo Molnar
-M:	mingo@elte.hu
-P:	Peter Zijlstra
-M:	peterz@infradead.org
+M:	Ingo Molnar <mingo@elte.hu>
+M:	Peter Zijlstra <peterz@infradead.org>
 S:	Maintained
 F:	kernel/sched*
 F:	include/linux/sched.h
 
 SCSI CDROM DRIVER
-P:	Jens Axboe
-M:	axboe@kernel.dk
+M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.kernel.dk
 S:	Maintained
 F:	drivers/scsi/sr*
 
 SCSI SG DRIVER
-P:	Doug Gilbert
-M:	dgilbert@interlog.com
+M:	Doug Gilbert <dgilbert@interlog.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.torque.net/sg
 S:	Maintained
@@ -5059,8 +4407,7 @@ F:	drivers/scsi/sg.c
 F:	include/scsi/sg.h
 
 SCSI SUBSYSTEM
-P:	James E.J. Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
@@ -5070,18 +4417,15 @@ F:	drivers/scsi/
 F:	include/scsi/
 
 SCSI TAPE DRIVER
-P:	Kai Mäkisara
-M:	Kai.Makisara@kolumbus.fi
+M:	Kai Mäkisara <Kai.Makisara@kolumbus.fi>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	Documentation/scsi/st.txt
 F:	drivers/scsi/st*
 
 SCTP PROTOCOL
-P:	Vlad Yasevich
-M:	vladislav.yasevich@hp.com
-P:	Sridhar Samudrala
-M:	sri@us.ibm.com
+M:	Vlad Yasevich <vladislav.yasevich@hp.com>
+M:	Sridhar Samudrala <sri@us.ibm.com>
 L:	linux-sctp@vger.kernel.org
 W:	http://lksctp.sourceforge.net
 S:	Supported
@@ -5091,8 +4435,7 @@ F:	include/net/sctp/
 F:	net/sctp/
 
 SCx200 CPU SUPPORT
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 S:	Odd Fixes
 F:	Documentation/i2c/busses/scx200_acb
 F:	arch/x86/kernel/scx200_32.c
@@ -5102,49 +4445,42 @@ F:	drivers/mtd/maps/scx200_docflash.c
 F:	include/linux/scx200.h
 
 SCx200 GPIO DRIVER
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 S:	Maintained
 F:	drivers/char/scx200_gpio.c
 F:	include/linux/scx200_gpio.h
 
 SCx200 HRT CLOCKSOURCE DRIVER
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 S:	Maintained
 F:	drivers/clocksource/scx200_hrt.c
 
 SDRICOH_CS MMC/SD HOST CONTROLLER INTERFACE DRIVER
-P:	Sascha Sommer
-M:	saschasommer@freenet.de
+M:	Sascha Sommer <saschasommer@freenet.de>
 L:	sdricohcs-devel@lists.sourceforge.net (subscribers-only)
 S:	Maintained
 F:	drivers/mmc/host/sdricoh_cs.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-P:	Pierre Ossman
-M:	pierre@ossman.eu
+M:	Pierre Ossman <pierre@ossman.eu>
 L:	sdhci-devel@lists.ossman.eu
 S:	Maintained
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
-P:	Anton Vorontsov
-M:	avorontsov@ru.mvista.com
+M:	Anton Vorontsov <avorontsov@ru.mvista.com>
 L:	linuxppc-dev@ozlabs.org
 L:	sdhci-devel@lists.ossman.eu
 S:	Maintained
 F:	drivers/mmc/host/sdhci.*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	sdhci-devel@lists.ossman.eu
 S:	Maintained
 F:	drivers/mmc/host/sdhci-s3c.c
 
 SECURITY SUBSYSTEM
-P:	James Morris
-M:	jmorris@namei.org
+M:	James Morris <jmorris@namei.org>
 L:	linux-security-module@vger.kernel.org (suggested Cc:)
 T:	git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
 W:	http://security.wiki.kernel.org/
@@ -5152,17 +4488,13 @@ S:	Supported
 F:	security/
 
 SECURITY CONTACT
-P:	Security Officers
-M:	security@kernel.org
+M:	Security Officers <security@kernel.org>
 S:	Supported
 
 SELINUX SECURITY MODULE
-P:	Stephen Smalley
-M:	sds@tycho.nsa.gov
-P:	James Morris
-M:	jmorris@namei.org
-P:	Eric Paris
-M:	eparis@parisplace.org
+M:	Stephen Smalley <sds@tycho.nsa.gov>
+M:	James Morris <jmorris@namei.org>
+M:	Eric Paris <eparis@parisplace.org>
 L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://selinuxproject.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
@@ -5171,15 +4503,13 @@ F:	include/linux/selinux*
 F:	security/selinux/
 
 SENSABLE PHANTOM
-P:	Jiri Slaby
-M:	jirislaby@gmail.com
+M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
 F:	drivers/misc/phantom.c
 F:	include/linux/phantom.h
 
 SERIAL ATA (SATA) SUBSYSTEM
-P:	Jeff Garzik
-M:	jgarzik@pobox.com
+M:	Jeff Garzik <jgarzik@pobox.com>
 L:	linux-ide@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
 S:	Supported
@@ -5188,10 +4518,8 @@ F:	include/linux/ata.h
 F:	include/linux/libata.h
 
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
-P:	Sathya Perla
-M:	sathyap@serverengines.com
-P:	Subbu Seetharaman
-M:	subbus@serverengines.com
+M:	Sathya Perla <sathyap@serverengines.com>
+M:	Subbu Seetharaman <subbus@serverengines.com>
 L:	netdev@vger.kernel.org
 W:	http://www.serverengines.com
 S:	Supported
@@ -5200,20 +4528,17 @@ F:	drivers/net/benet/
 SFC NETWORK DRIVER
 P:	Steve Hodgson
 P:	Ben Hutchings
-P:	Robert Stonehouse
-M:	linux-net-drivers@solarflare.com
+M:	Robert Stonehouse <linux-net-drivers@solarflare.com>
 S:	Supported
 F:	drivers/net/sfc/
 
 SGI GRU DRIVER
-P:	Jack Steiner
-M:	steiner@sgi.com
+M:	Jack Steiner <steiner@sgi.com>
 S:	Maintained
 F:	drivers/misc/sgi-gru/
 
 SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
-P:	Pat Gefre
-M:	pfg@sgi.com
+M:	Pat Gefre <pfg@sgi.com>
 L:	linux-ia64@vger.kernel.org
 S:	Supported
 F:	Documentation/ia64/serial.txt
@@ -5221,22 +4546,19 @@ F:	drivers/serial/ioc?_serial.c
 F:	include/linux/ioc?.h
 
 SGI VISUAL WORKSTATION 320 AND 540
-P:	Andrey Panin
-M:	pazke@donpac.ru
+M:	Andrey Panin <pazke@donpac.ru>
 L:	linux-visws-devel@lists.sf.net
 W:	http://linux-visws.sf.net
 S:	Maintained for 2.6.
 F:	Documentation/sgi-visws.txt
 
 SGI XP/XPC/XPNET DRIVER
-P:	Robin Holt
-M:	holt@sgi.com
+M:	Robin Holt <holt@sgi.com>
 S:	Maintained
 F:	drivers/misc/sgi-xp/
 
 SHARP LH SUPPORT (LH7952X & LH7A40X)
-P:	Marc Singer
-M:	elf@buici.com
+M:	Marc Singer <elf@buici.com>
 W:	http://projects.buici.com/arm
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 S:	Maintained
@@ -5247,23 +4569,20 @@ F:	drivers/usb/gadget/lh7a40*
 F:	drivers/usb/host/ohci-lh7a40*
 
 SHPC HOTPLUG DRIVER
-P:	Kristen Carlson Accardi
-M:	kristen.c.accardi@intel.com
+M:	Kristen Carlson Accardi <kristen.c.accardi@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	drivers/pci/hotplug/shpchp*
 
 SIMTEC EB110ATX (Chalice CATS)
 P:	Ben Dooks
-P:	Vincent Sanders
-M:	support@simtec.co.uk
+M:	Vincent Sanders <support@simtec.co.uk>
 W:	http://www.simtec.co.uk/products/EB110ATX/
 S:	Supported
 
 SIMTEC EB2410ITX (BAST)
 P:	Ben Dooks
-P:	Vincent Sanders
-M:	support@simtec.co.uk
+M:	Vincent Sanders <support@simtec.co.uk>
 W:	http://www.simtec.co.uk/products/EB2410ITX/
 S:	Supported
 F:	arch/arm/mach-s3c2410/
@@ -5271,31 +4590,27 @@ F:	drivers/*/*s3c2410*
 F:	drivers/*/*/*s3c2410*
 
 SIS 190 ETHERNET DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
+M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/sis190.c
 
 SIS 900/7016 FAST ETHERNET DRIVER
-P:	Daniele Venzano
-M:	venza@brownhat.org
+M:	Daniele Venzano <venza@brownhat.org>
 W:	http://www.brownhat.org/sis900.html
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/sis900.*
 
 SIS 96X I2C/SMBUS DRIVER
-P:	Mark M. Hoffman
-M:	mhoffman@lightlink.com
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-sis96x
 F:	drivers/i2c/busses/i2c-sis96x.c
 
 SIS FRAMEBUFFER DRIVER
-P:	Thomas Winischhofer
-M:	thomas@winischhofer.net
+M:	Thomas Winischhofer <thomas@winischhofer.net>
 W:	http://www.winischhofer.net/linuxsisvga.shtml
 S:	Maintained
 F:	Documentation/fb/sisfb.txt
@@ -5303,70 +4618,59 @@ F:	drivers/video/sis/
 F:	include/video/sisfb.h
 
 SIS USB2VGA DRIVER
-P:	Thomas Winischhofer
-M:	thomas@winischhofer.net
+M:	Thomas Winischhofer <thomas@winischhofer.net>
 W:	http://www.winischhofer.at/linuxsisusbvga.shtml
 S:	Maintained
 F:	drivers/usb/misc/sisusbvga/
 
 SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-P:	Stephen Hemminger
-M:	shemminger@linux-foundation.org
+M:	Stephen Hemminger <shemminger@linux-foundation.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/skge.*
 F:	drivers/net/sky2.*
 
 SLAB ALLOCATOR
-P:	Christoph Lameter
-M:	cl@linux-foundation.org
-P:	Pekka Enberg
-M:	penberg@cs.helsinki.fi
-P:	Matt Mackall
-M:	mpm@selenic.com
+M:	Christoph Lameter <cl@linux-foundation.org>
+M:	Pekka Enberg <penberg@cs.helsinki.fi>
+M:	Matt Mackall <mpm@selenic.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	include/linux/sl?b*.h
 F:	mm/sl?b.c
 
 SMC91x ETHERNET DRIVER
-P:	Nicolas Pitre
-M:	nico@cam.org
+M:	Nicolas Pitre <nico@cam.org>
 S:	Maintained
 F:	drivers/net/smc91x.*
 
 SMSC47B397 HARDWARE MONITOR DRIVER
-P:	Mark M. Hoffman
-M:	mhoffman@lightlink.com
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/smsc47b397
 F:	drivers/hwmon/smsc47b397.c
 
 SMSC911x ETHERNET DRIVER
-P:	Steve Glendinning
-M:	steve.glendinning@smsc.com
+M:	Steve Glendinning <steve.glendinning@smsc.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	include/linux/smsc911x.h
 F:	drivers/net/smsc911x.*
 
 SMSC9420 PCI ETHERNET DRIVER
-P:	Steve Glendinning
-M:	steve.glendinning@smsc.com
+M:	Steve Glendinning <steve.glendinning@smsc.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/smsc9420.*
 
 SMX UIO Interface
-P:	Ben Nizette
-M:	bn@niasdigital.com
+M:	Ben Nizette <bn@niasdigital.com>
 S:	Maintained
 F:	drivers/uio/uio_smx.c
 
 SN-IA64 (Itanium) SUB-PLATFORM
-P:	Jes Sorensen
-M:	jes@sgi.com
+M:	Jes Sorensen <jes@sgi.com>
 L:	linux-altix@sgi.com
 L:	linux-ia64@vger.kernel.org
 W:	http://www.sgi.com/altix
@@ -5374,8 +4678,7 @@ S:	Maintained
 F:	arch/ia64/sn/
 
 SOC-CAMERA V4L2 SUBSYSTEM
-P:	Guennadi Liakhovetski
-M:	g.liakhovetski@gmx.de
+M:	Guennadi Liakhovetski <g.liakhovetski@gmx.de>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
@@ -5383,37 +4686,32 @@ F:	include/media/v4l2*
 F:	drivers/media/video/v4l2*
 
 SOEKRIS NET48XX LED SUPPORT
-P:	Chris Boot
-M:	bootc@bootc.net
+M:	Chris Boot <bootc@bootc.net>
 S:	Maintained
 F:	drivers/leds/leds-net48xx.c
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
-P:	Neil Brown
-M:	neilb@suse.de
+M:	Neil Brown <neilb@suse.de>
 L:	linux-raid@vger.kernel.org
 S:	Supported
 F:	drivers/md/
 F:	include/linux/raid/
 
 SONIC NETWORK DRIVER
-P:	Thomas Bogendoerfer
-M:	tsbogend@alpha.franken.de
+M:	Thomas Bogendoerfer <tsbogend@alpha.franken.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/sonic.*
 
 SONICS SILICON BACKPLANE DRIVER (SSB)
-P:	Michael Buesch
-M:	mb@bu3sch.de
+M:	Michael Buesch <mb@bu3sch.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/ssb/
 F:	include/linux/ssb/
 
 SONY VAIO CONTROL DEVICE DRIVER
-P:	Mattia Dongili
-M:	malattia@linux.it
+M:	Mattia Dongili <malattia@linux.it>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
 S:	Maintained
@@ -5423,17 +4721,14 @@ F:	drivers/platform/x86/sony-laptop.c
 F:	include/linux/sony-laptop.h
 
 SONY MEMORYSTICK CARD SUPPORT
-P:	Alex Dubov
-M:	oakad@yahoo.com
+M:	Alex Dubov <oakad@yahoo.com>
 W:	http://tifmxx.berlios.de/
 S:	Maintained
 F:	drivers/memstick/host/tifm_ms.c
 
 SOUND
-P:	Jaroslav Kysela
-M:	perex@perex.cz
-P:	Takashi Iwai
-M:	tiwai@suse.de
+M:	Jaroslav Kysela <perex@perex.cz>
+M:	Takashi Iwai <tiwai@suse.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://www.alsa-project.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
@@ -5444,10 +4739,8 @@ F:	include/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-P:	Liam Girdwood
-M:	lrg@slimlogic.co.uk
-P:	Mark Brown
-M:	broonie@opensource.wolfsonmicro.com
+M:	Liam Girdwood <lrg@slimlogic.co.uk>
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://alsa-project.org/main/index.php/ASoC
@@ -5456,8 +4749,7 @@ F:	sound/soc/
 F:	include/sound/soc*
 
 SPARC + UltraSPARC (sparc/sparc64)
-P:	David S. Miller
-M:	davem@davemloft.net
+M:	"David S. Miller" <davem@davemloft.net>
 L:	sparclinux@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
@@ -5465,15 +4757,13 @@ S:	Maintained
 F:	arch/sparc/
 
 SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
-P:	Roger Wolff
-M:	R.E.Wolff@BitWizard.nl
+M:	Roger Wolff <R.E.Wolff@BitWizard.nl>
 S:	Supported
 F:	Documentation/serial/specialix.txt
 F:	drivers/char/specialix*
 
 SPI SUBSYSTEM
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	spi-devel-general@lists.sourceforge.net
 S:	Maintained
 F:	Documentation/spi/
@@ -5481,18 +4771,15 @@ F:	drivers/spi/
 F:	include/linux/spi/
 
 SPIDERNET NETWORK DRIVER for CELL
-P:	Ishizaki Kou
-M:	kou.ishizaki@toshiba.co.jp
-P:	Jens Osterkamp
-M:	jens@de.ibm.com
+M:	Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
+M:	Jens Osterkamp <jens@de.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/spider_net.txt
 F:	drivers/net/spider_net*
 
 SPU FILE SYSTEM
-P:	Jeremy Kerr
-M:	jk@ozlabs.org
+M:	Jeremy Kerr <jk@ozlabs.org>
 L:	linuxppc-dev@ozlabs.org
 L:	cbe-oss-dev@ozlabs.org
 W:	http://www.ibm.com/developerworks/power/cell/
@@ -5501,8 +4788,7 @@ F:	Documentation/filesystems/spufs.txt
 F:	arch/powerpc/platforms/cell/spufs/
 
 SQUASHFS FILE SYSTEM
-P:	Phillip Lougher
-M:	phillip@lougher.demon.co.uk
+M:	Phillip Lougher <phillip@lougher.demon.co.uk>
 L:	squashfs-devel@lists.sourceforge.net (subscribers-only)
 W:	http://squashfs.org.uk
 S:	Maintained
@@ -5510,49 +4796,41 @@ F:	Documentation/filesystems/squashfs.txt
 F:	fs/squashfs/
 
 SRM (Alpha) environment access
-P:	Jan-Benedict Glaw
-M:	jbglaw@lug-owl.de
+M:	Jan-Benedict Glaw <jbglaw@lug-owl.de>
 S:	Maintained
 F:	arch/alpha/kernel/srm_env.c
 
 STABLE BRANCH
-P:	Greg Kroah-Hartman
-M:	greg@kroah.com
-P:	Chris Wright
-M:	chrisw@sous-sol.org
+M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Chris Wright <chrisw@sous-sol.org>
 L:	stable@kernel.org
 S:	Maintained
 
 STAGING SUBSYSTEM
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 L:	devel@driverdev.osuosl.org
 S:	Maintained
 F:	drivers/staging/
 
 STARFIRE/DURALAN NETWORK DRIVER
-P:	Ion Badulescu
-M:	ionut@cs.columbia.edu
-S:	Maintained
+M:	Ion Badulescu <ionut@badula.org>
+S:	Odd Fixes
 F:	drivers/net/starfire*
 
 STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
-W:	http://mosquitonet.Stanford.EDU/strip.html
 S:	Orphan
 F:	drivers/net/wireless/strip.c
 F:	include/linux/if_strip.h
 
 STRADIS MPEG-2 DECODER DRIVER
-P:	Nathan Laredo
-M:	laredo@gnu.org
+M:	Nathan Laredo <laredo@gnu.org>
 W:	http://www.stradis.com/
 S:	Maintained
 F:	drivers/media/video/stradis.c
 
 SUN3/3X
-P:	Sam Creasey
-M:	sammy@sammy.net
+M:	Sam Creasey <sammy@sammy.net>
 W:	http://sammy.net/sun3/
 S:	Maintained
 F:	arch/m68k/kernel/*sun3*
@@ -5560,8 +4838,7 @@ F:	arch/m68k/sun3*/
 F:	arch/m68k/include/asm/sun3*
 
 SUPERH
-P:	Paul Mundt
-M:	lethal@linux-sh.org
+M:	Paul Mundt <lethal@linux-sh.org>
 L:	linux-sh@vger.kernel.org
 W:	http://www.linux-sh.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
@@ -5571,12 +4848,9 @@ F:	arch/sh/
 F:	drivers/sh/
 
 SUSPEND TO RAM
-P:	Len Brown
-M:	len.brown@intel.com
-P:	Pavel Machek
-M:	pavel@ucw.cz
-P:	Rafael J. Wysocki
-M:	rjw@sisk.pl
+M:	Len Brown <len.brown@intel.com>
+M:	Pavel Machek <pavel@ucw.cz>
+M:	"Rafael J. Wysocki" <rjw@sisk.pl>
 L:	linux-pm@lists.linux-foundation.org
 S:	Supported
 F:	Documentation/power/
@@ -5588,32 +4862,28 @@ F:	include/linux/freezer.h
 F:	include/linux/pm.h
 
 SVGA HANDLING
-P:	Martin Mares
-M:	mj@ucw.cz
+M:	Martin Mares <mj@ucw.cz>
 L:	linux-video@atrey.karlin.mff.cuni.cz
 S:	Maintained
 F:	Documentation/svga.txt
 F:	arch/x86/boot/video*
 
 SYSV FILESYSTEM
-P:	Christoph Hellwig
-M:	hch@infradead.org
+M:	Christoph Hellwig <hch@infradead.org>
 S:	Maintained
 F:	Documentation/filesystems/sysv-fs.txt
 F:	fs/sysv/
 F:	include/linux/sysv_fs.h
 
 TASKSTATS STATISTICS INTERFACE
-P:	Balbir Singh
-M:	balbir@linux.vnet.ibm.com
+M:	Balbir Singh <balbir@linux.vnet.ibm.com>
 S:	Maintained
 F:	Documentation/accounting/taskstats*
 F:	include/linux/taskstats*
 F:	kernel/taskstats.c
 
 TC CLASSIFIER
-P:	Jamal Hadi Salim
-M:	hadi@cyberus.ca
+M:	Jamal Hadi Salim <hadi@cyberus.ca>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	include/linux/pkt_cls.h
@@ -5621,38 +4891,31 @@ F:	include/net/pkt_cls.h
 F:	net/sched/
 
 TCP LOW PRIORITY MODULE
-P:	Wong Hoi Sing, Edison
-M:	hswong3i@gmail.com
-P:	Hung Hing Lun, Mike
-M:	hlhung3i@gmail.com
+M:	"Wong Hoi Sing, Edison" <hswong3i@gmail.com>
+M:	"Hung Hing Lun, Mike" <hlhung3i@gmail.com>
 W:	http://tcp-lp-mod.sourceforge.net/
 S:	Maintained
 F:	net/ipv4/tcp_lp.c
 
 TEHUTI ETHERNET DRIVER
-P:	Alexander Indenbaum
-M:	baum@tehutinetworks.net
-P:	Andy Gospodarek
-M:	andy@greyhouse.net
+M:	Alexander Indenbaum <baum@tehutinetworks.net>
+M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/tehuti*
 
 Telecom Clock Driver for MCPL0010
-P:	Mark Gross
-M:	mark.gross@intel.com
+M:	Mark Gross <mark.gross@intel.com>
 S:	Supported
 F:	drivers/char/tlclk.c
 
 TENSILICA XTENSA PORT (xtensa)
-P:	Chris Zankel
-M:	chris@zankel.net
+M:	Chris Zankel <chris@zankel.net>
 S:	Maintained
 F:	arch/xtensa/
 
 THINKPAD ACPI EXTRAS DRIVER
-P:	Henrique de Moraes Holschuh
-M:	ibm-acpi@hmh.eng.br
+M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
 L:	ibm-acpi-devel@lists.sourceforge.net
 W:	http://ibm-acpi.sourceforge.net
 W:	http://thinkwiki.org/wiki/Ibm-acpi
@@ -5661,27 +4924,22 @@ S:	Maintained
 F:	drivers/platform/x86/thinkpad_acpi.c
 
 TI FLASH MEDIA INTERFACE DRIVER
-P:	Alex Dubov
-M:	oakad@yahoo.com
+M:	Alex Dubov <oakad@yahoo.com>
 S:	Maintained
 F:	drivers/misc/tifm*
 F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h
 
 TI TWL4030 SERIES SOC CODEC DRIVER
-P:	Peter Ujfalusi
-M:	peter.ujfalusi@nokia.com
+M:	Peter Ujfalusi <peter.ujfalusi@nokia.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
 F:	sound/soc/codecs/twl4030*
 
 TIPC NETWORK LAYER
-P:	Per Liden
-M:	per.liden@ericsson.com
-P:	Jon Maloy
-M:	jon.maloy@ericsson.com
-P:	Allan Stephens
-M:	allan.stephens@windriver.com
+M:	Per Liden <per.liden@ericsson.com>
+M:	Jon Maloy <jon.maloy@ericsson.com>
+M:	Allan Stephens <allan.stephens@windriver.com>
 L:	tipc-discussion@lists.sourceforge.net
 W:	http://tipc.sourceforge.net/
 W:	http://tipc.cslab.ericsson.net/
@@ -5692,8 +4950,7 @@ F:	include/net/tipc/
 F:	net/tipc/
 
 TLAN NETWORK DRIVER
-P:	Samuel Chessman
-M:	chessman@tux.org
+M:	Samuel Chessman <chessman@tux.org>
 L:	tlan-devel@lists.sourceforge.net (subscribers-only)
 W:	http://sourceforge.net/projects/tlan/
 S:	Maintained
@@ -5701,10 +4958,8 @@ F:	Documentation/networking/tlan.txt
 F:	drivers/net/tlan.*
 
 TOMOYO SECURITY MODULE
-P:	Kentaro Takeda
-M:	takedakn@nttdata.co.jp
-P:	Tetsuo Handa
-M:	penguin-kernel@I-love.SAKURA.ne.jp
+M:	Kentaro Takeda <takedakn@nttdata.co.jp>
+M:	Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
 L:	tomoyo-users-en@lists.sourceforge.jp (subscribers-only, for developers and users in English)
 L:	tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese)
 L:	tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese)
@@ -5718,8 +4973,7 @@ S:	Orphan
 F:	drivers/platform/x86/toshiba_acpi.c
 
 TOSHIBA SMM DRIVER
-P:	Jonathan Buzzard
-M:	jonathan@buzzard.org.uk
+M:	Jonathan Buzzard <jonathan@buzzard.org.uk>
 L:	tlinux-users@tce.toshiba-dme.co.jp
 W:	http://www.buzzard.org.uk/toshiba/
 S:	Maintained
@@ -5727,61 +4981,51 @@ F:	drivers/char/toshiba.c
 F:	include/linux/toshiba.h
 
 TMIO MMC DRIVER
-P:	Ian Molton
-M:	ian@mnementh.co.uk
+M:	Ian Molton <ian@mnementh.co.uk>
 S:	Maintained
 F:	drivers/mmc/host/tmio_mmc.*
 
 TMPFS (SHMEM FILESYSTEM)
-P:	Hugh Dickins
-M:	hugh.dickins@tiscali.co.uk
+M:	Hugh Dickins <hugh.dickins@tiscali.co.uk>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	include/linux/shmem_fs.h
 F:	mm/shmem.c
 
 TPM DEVICE DRIVER
-P:	Debora Velarde
-M:	debora@linux.vnet.ibm.com
-P:	Rajiv Andrade
-M:	srajiv@linux.vnet.ibm.com
+M:	Debora Velarde <debora@linux.vnet.ibm.com>
+M:	Rajiv Andrade <srajiv@linux.vnet.ibm.com>
 W:	http://tpmdd.sourceforge.net
-P:	Marcel Selhorst
-M:	m.selhorst@sirrix.com
+M:	Marcel Selhorst <m.selhorst@sirrix.com>
 W:	http://www.sirrix.com
 L:	tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/char/tpm/
 
 TRIVIAL PATCHES
-P:	Jiri Kosina
-M:	trivial@kernel.org
+M:	Jiri Kosina <trivial@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
 S:	Maintained
+
+TTY LAYER
+M:	Greg Kroah-Hartman <gregkh@suse.de>
+S:	Maintained
+T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 F:	drivers/char/tty_*
 F:	drivers/serial/serial_core.c
 F:	include/linux/serial_core.h
 F:	include/linux/serial.h
 F:	include/linux/tty.h
 
-TTY LAYER
-P:	Alan Cox
-M:	alan@lxorguk.ukuu.org.uk
-S:	Maintained
-T:	stgit http://zeniv.linux.org.uk/~alan/ttydev/
-
 TULIP NETWORK DRIVERS
-P:	Grant Grundler
-M:	grundler@parisc-linux.org
-P:	Kyle McMartin
-M:	kyle@mcmartin.ca
+M:	Grant Grundler <grundler@parisc-linux.org>
+M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/tulip/
 
 TUN/TAP driver
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
+M:	Maxim Krasnyansky <maxk@qualcomm.com>
 L:	vtun@office.satix.net
 W:	http://vtun.sourceforge.net/tun
 S:	Maintained
@@ -5789,24 +5033,20 @@ F:	Documentation/networking/tuntap.txt
 F:	arch/um/os-Linux/drivers/
 
 TURBOCHANNEL SUBSYSTEM
-P:	Maciej W. Rozycki
-M:	macro@linux-mips.org
+M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/tc/
 F:	include/linux/tc.h
 
 U14-34F SCSI DRIVER
-P:	Dario Ballabio
-M:	ballabio_dario@emc.com
+M:	Dario Ballabio <ballabio_dario@emc.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/u14-34f.c
 
 UBI FILE SYSTEM (UBIFS)
-P:	Artem Bityutskiy
-M:	dedekind@infradead.org
-P:	Adrian Hunter
-M:	ext-adrian.hunter@nokia.com
+M:	Artem Bityutskiy <dedekind@infradead.org>
+M:	Adrian Hunter <adrian.hunter@nokia.com>
 L:	linux-mtd@lists.infradead.org
 T:	git git://git.infradead.org/ubifs-2.6.git
 W:	http://www.linux-mtd.infradead.org/doc/ubifs.html
@@ -5815,37 +5055,32 @@ F:	Documentation/filesystems/ubifs.txt
 F:	fs/ubifs/
 
 UCLINUX (AND M68KNOMMU)
-P:	Greg Ungerer
-M:	gerg@uclinux.org
+M:	Greg Ungerer <gerg@uclinux.org>
 W:	http://www.uclinux.org/
 L:	uclinux-dev@uclinux.org  (subscribers-only)
 S:	Maintained
 F:	arch/m68knommu/
 
 UCLINUX FOR RENESAS H8/300 (H8300)
-P:	Yoshinori Sato
-M:	ysato@users.sourceforge.jp
+M:	Yoshinori Sato <ysato@users.sourceforge.jp>
 W:	http://uclinux-h8.sourceforge.jp/
 S:	Supported
 
 UDF FILESYSTEM
-P:	Jan Kara
-M:	jack@suse.cz
+M:	Jan Kara <jack@suse.cz>
 W:	http://linux-udf.sourceforge.net
 S:	Maintained
 F:	Documentation/filesystems/udf.txt
 F:	fs/udf/
 
 UFS FILESYSTEM
-P:	Evgeniy Dushistov
-M:	dushistov@mail.ru
+M:	Evgeniy Dushistov <dushistov@mail.ru>
 S:	Maintained
 F:	Documentation/filesystems/ufs.txt
 F:	fs/ufs/
 
 ULTRA-WIDEBAND (UWB) SUBSYSTEM:
-P:	David Vrabel
-M:	david.vrabel@csr.com
+M:	David Vrabel <david.vrabel@csr.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	drivers/uwb/*
@@ -5853,8 +5088,7 @@ F:	include/linux/uwb.h
 F:	include/linux/uwb/
 
 UNIFORM CDROM DRIVER
-P:	Jens Axboe
-M:	axboe@kernel.dk
+M:	Jens Axboe <axboe@kernel.dk>
 W:	http://www.kernel.dk
 S:	Maintained
 F:	Documentation/cdrom/
@@ -5862,8 +5096,7 @@ F:	drivers/cdrom/cdrom.c
 F:	include/linux/cdrom.h
 
 UNSORTED BLOCK IMAGES (UBI)
-P:	Artem Bityutskiy
-M:	dedekind@infradead.org
+M:	Artem Bityutskiy <dedekind@infradead.org>
 W:	http://www.linux-mtd.infradead.org/
 L:	linux-mtd@lists.infradead.org
 T:	git git://git.infradead.org/ubi-2.6.git
@@ -5873,23 +5106,20 @@ F:	include/linux/mtd/ubi.h
 F:	include/mtd/ubi-user.h
 
 USB ACM DRIVER
-P:	Oliver Neukum
-M:	oliver@neukum.name
+M:	Oliver Neukum <oliver@neukum.name>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	Documentation/usb/acm.txt
 F:	drivers/usb/class/cdc-acm.*
 
 USB BLOCK DRIVER (UB ub)
-P:	Pete Zaitcev
-M:	zaitcev@redhat.com
+M:	Pete Zaitcev <zaitcev@redhat.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	drivers/block/ub.c
 
 USB CDC ETHERNET DRIVER
-P:	Greg Kroah-Hartman
-M:	greg@kroah.com
+M:	Greg Kroah-Hartman <greg@kroah.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 W:	http://www.kroah.com/linux-usb/
@@ -5897,39 +5127,34 @@ F:	drivers/net/usb/cdc_*.c
 F:	include/linux/usb/cdc.h
 
 USB CYPRESS C67X00 DRIVER
-P:	Peter Korsgaard
-M:	jacmet@sunsite.dk
+M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/c67x00/
 
 USB DAVICOM DM9601 DRIVER
-P:	Peter Korsgaard
-M:	jacmet@sunsite.dk
+M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	netdev@vger.kernel.org
 W:	http://www.linux-usb.org/usbnet
 S:	Maintained
 F:	drivers/net/usb/dm9601.c
 
 USB DIAMOND RIO500 DRIVER
-P:	Cesar Miquel
-M:	miquel@df.uba.ar
+M:	Cesar Miquel <miquel@df.uba.ar>
 L:	rio500-users@lists.sourceforge.net
 W:	http://rio500.sourceforge.net
 S:	Maintained
 F:	drivers/usb/misc/rio500*
 
 USB EHCI DRIVER
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 S:	Odd Fixes
 F:	Documentation/usb/ehci.txt
 F:	drivers/usb/host/ehci*
 
 USB ET61X[12]51 DRIVER
-P:	Luca Risolia
-M:	luca.risolia@studio.unibo.it
+M:	Luca Risolia <luca.risolia@studio.unibo.it>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -5938,8 +5163,7 @@ S:	Maintained
 F:	drivers/media/video/et61x251/
 
 USB GADGET/PERIPHERAL SUBSYSTEM
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org/gadget
 S:	Maintained
@@ -5947,8 +5171,7 @@ F:	drivers/usb/gadget/
 F:	include/linux/usb/gadget*
 
 USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
-P:	Jiri Kosina
-M:	jkosina@suse.cz
+M:	Jiri Kosina <jkosina@suse.cz>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
@@ -5956,23 +5179,20 @@ F:	Documentation/usb/hiddev.txt
 F:	drivers/hid/usbhid/
 
 USB ISP116X DRIVER
-P:	Olav Kongas
-M:	ok@artecdesign.ee
+M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/host/isp116x*
 F:	include/linux/usb/isp116x.h
 
 USB KAWASAKI LSI DRIVER
-P:	Oliver Neukum
-M:	oliver@neukum.name
+M:	Oliver Neukum <oliver@neukum.name>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/kl5kusb105.*
 
 USB MASS STORAGE DRIVER
-P:	Matthew Dharm
-M:	mdharm-usb@one-eyed-alien.net
+M:	Matthew Dharm <mdharm-usb@one-eyed-alien.net>
 L:	linux-usb@vger.kernel.org
 L:	usb-storage@lists.one-eyed-alien.net
 S:	Maintained
@@ -5980,31 +5200,27 @@ W:	http://www.one-eyed-alien.net/~mdharm/linux-usb/
 F:	drivers/usb/storage/
 
 USB OHCI DRIVER
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 S:	Odd Fixes
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 
 USB OPTION-CARD DRIVER
-P:	Matthias Urlichs
-M:	smurf@smurf.noris.de
+M:	Matthias Urlichs <smurf@smurf.noris.de>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/option.c
 
 USB OV511 DRIVER
-P:	Mark McClelland
-M:	mmcclell@bigfoot.com
+M:	Mark McClelland <mmcclell@bigfoot.com>
 L:	linux-usb@vger.kernel.org
 W:	http://alpha.dyndns.org/ov511/
 S:	Maintained
 F:	drivers/media/video/ov511.*
 
 USB PEGASUS DRIVER
-P:	Petko Manolov
-M:	petkan@users.sourceforge.net
+M:	Petko Manolov <petkan@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
 W:	http://pegasus2.sourceforge.net/
@@ -6012,15 +5228,13 @@ S:	Maintained
 F:	drivers/net/usb/pegasus.*
 
 USB PRINTER DRIVER (usblp)
-P:	Pete Zaitcev
-M:	zaitcev@redhat.com
+M:	Pete Zaitcev <zaitcev@redhat.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	drivers/usb/class/usblp.c
 
 USB RTL8150 DRIVER
-P:	Petko Manolov
-M:	petkan@users.sourceforge.net
+M:	Petko Manolov <petkan@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
 W:	http://pegasus2.sourceforge.net/
@@ -6028,8 +5242,7 @@ S:	Maintained
 F:	drivers/net/usb/rtl8150.c
 
 USB SE401 DRIVER
-P:	Jeroen Vreeken
-M:	pe1rxq@amsat.org
+M:	Jeroen Vreeken <pe1rxq@amsat.org>
 L:	linux-usb@vger.kernel.org
 W:	http://www.chello.nl/~j.vreeken/se401/
 S:	Maintained
@@ -6037,15 +5250,13 @@ F:	Documentation/video4linux/se401.txt
 F:	drivers/media/video/se401.*
 
 USB SERIAL BELKIN F5U103 DRIVER
-P:	William Greathouse
-M:	wgreathouse@smva.com
+M:	William Greathouse <wgreathouse@smva.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/belkin_sa.*
 
 USB SERIAL CYPRESS M8 DRIVER
-P:	Lonnie Mendez
-M:	dignome@gmail.com
+M:	Lonnie Mendez <dignome@gmail.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 W:	http://geocities.com/i0xox0i
@@ -6053,23 +5264,20 @@ W:	http://firstlight.net/cvs
 F:	drivers/usb/serial/cypress_m8.*
 
 USB SERIAL CYBERJACK DRIVER
-P:	Matthias Bruestle and Harald Welte
-M:	support@reiner-sct.com
+M:	Matthias Bruestle and Harald Welte <support@reiner-sct.com>
 W:	http://www.reiner-sct.de/support/treiber_cyberjack.php
 S:	Maintained
 F:	drivers/usb/serial/cyberjack.c
 
 USB SERIAL DIGI ACCELEPORT DRIVER
-P:	Peter Berger and Al Borchers
-M:	pberger@brimson.com
-M:	alborchers@steinerpoint.com
+M:	Peter Berger <pberger@brimson.com>
+M:	Al Borchers <alborchers@steinerpoint.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/digi_acceleport.c
 
 USB SERIAL DRIVER
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	Documentation/usb/usb-serial.txt
@@ -6078,38 +5286,33 @@ F:	drivers/usb/serial/usb-serial.c
 F:	include/linux/usb/serial.h
 
 USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
-P:	Gary Brubaker
-M:	xavyer@ix.netcom.com
+M:	Gary Brubaker <xavyer@ix.netcom.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/empeg.c
 
 USB SERIAL KEYSPAN DRIVER
-P:	Greg Kroah-Hartman
-M:	greg@kroah.com
+M:	Greg Kroah-Hartman <greg@kroah.com>
 L:	linux-usb@vger.kernel.org
 W:	http://www.kroah.com/linux/
 S:	Maintained
 F:	drivers/usb/serial/*keyspan*
 
 USB SERIAL WHITEHEAT DRIVER
-P:	Support Department
-M:	support@connecttech.com
+M:	Support Department <support@connecttech.com>
 L:	linux-usb@vger.kernel.org
 W:	http://www.connecttech.com
 S:	Supported
 F:	drivers/usb/serial/whiteheat*
 
 USB SMSC95XX ETHERNET DRIVER
-P:	Steve Glendinning
-M:	steve.glendinning@smsc.com
+M:	Steve Glendinning <steve.glendinning@smsc.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/usb/smsc95xx.*
 
 USB SN9C1xx DRIVER
-P:	Luca Risolia
-M:	luca.risolia@studio.unibo.it
+M:	Luca Risolia <luca.risolia@studio.unibo.it>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6119,8 +5322,7 @@ F:	Documentation/video4linux/sn9c102.txt
 F:	drivers/media/video/sn9c102/
 
 USB SUBSYSTEM
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
@@ -6132,15 +5334,13 @@ F:	include/linux/usb.h
 F:	include/linux/usb/
 
 USB UHCI DRIVER
-P:	Alan Stern
-M:	stern@rowland.harvard.edu
+M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/host/uhci*
 
 USB "USBNET" DRIVER FRAMEWORK
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linux-usb.org/usbnet
 S:	Maintained
@@ -6148,8 +5348,7 @@ F:	drivers/net/usb/usbnet.c
 F:	include/linux/usb/usbnet.h
 
 USB VIDEO CLASS
-P:	Laurent Pinchart
-M:	laurent.pinchart@skynet.be
+M:	Laurent Pinchart <laurent.pinchart@skynet.be>
 L:	linux-uvc-devel@lists.berlios.de (subscribers-only)
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6158,8 +5357,7 @@ S:	Maintained
 F:	drivers/media/video/uvc/
 
 USB W996[87]CF DRIVER
-P:	Luca Risolia
-M:	luca.risolia@studio.unibo.it
+M:	Luca Risolia <luca.risolia@studio.unibo.it>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6169,21 +5367,18 @@ F:	Documentation/video4linux/w9968cf.txt
 F:	drivers/media/video/w996*
 
 USB WIRELESS RNDIS DRIVER (rndis_wlan)
-P:	Jussi Kivilinna
-M:	jussi.kivilinna@mbnet.fi
+M:	Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/rndis_wlan.c
 
 USB XHCI DRIVER
-P:	Sarah Sharp
-M:	sarah.a.sharp@intel.com
+M:	Sarah Sharp <sarah.a.sharp@intel.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 
 USB ZC0301 DRIVER
-P:	Luca Risolia
-M:	luca.risolia@studio.unibo.it
+M:	Luca Risolia <luca.risolia@studio.unibo.it>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6193,16 +5388,14 @@ F:	Documentation/video4linux/zc0301.txt
 F:	drivers/media/video/zc0301/
 
 USB ZD1201 DRIVER
-P:	Jeroen Vreeken
-M:	pe1rxq@amsat.org
+M:	Jeroen Vreeken <pe1rxq@amsat.org>
 L:	linux-usb@vger.kernel.org
 W:	http://linux-lc100020.sourceforge.net
 S:	Maintained
 F:	drivers/net/wireless/zd1201.*
 
 USB ZR364XX DRIVER
-P:	Antoine Jacquet
-M:	royale@zerezo.com
+M:	Antoine Jacquet <royale@zerezo.com>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6212,8 +5405,7 @@ F:	Documentation/video4linux/zr364xx.txt
 F:	drivers/media/video/zr364xx.c
 
 USER-MODE LINUX (UML)
-P:	Jeff Dike
-M:	jdike@addtoit.com
+M:	Jeff Dike <jdike@addtoit.com>
 L:	user-mode-linux-devel@lists.sourceforge.net
 L:	user-mode-linux-user@lists.sourceforge.net
 W:	http://user-mode-linux.sourceforge.net
@@ -6224,26 +5416,22 @@ F:	fs/hostfs/
 F:	fs/hppfs/
 
 USERSPACE I/O (UIO)
-P:	Hans J. Koch
-M:	hjk@linutronix.de
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	"Hans J. Koch" <hjk@linutronix.de>
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 S:	Maintained
 F:	Documentation/DocBook/uio-howto.tmpl
 F:	drivers/uio/
 F:	include/linux/uio*.h
 
 UTIL-LINUX-NG PACKAGE
-P:	Karel Zak
-M:	kzak@redhat.com
+M:	Karel Zak <kzak@redhat.com>
 L:	util-linux-ng@vger.kernel.org
 W:	http://kernel.org/~kzak/util-linux-ng/
 T:	git git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
 S:	Maintained
 
 UVESAFB DRIVER
-P:	Michal Januszewski
-M:	spock@gentoo.org
+M:	Michal Januszewski <spock@gentoo.org>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://dev.gentoo.org/~spock/projects/uvesafb/
 S:	Maintained
@@ -6251,53 +5439,44 @@ F:	Documentation/fb/uvesafb.txt
 F:	drivers/video/uvesafb.*
 
 VFAT/FAT/MSDOS FILESYSTEM
-P:	OGAWA Hirofumi
-M:	hirofumi@mail.parknet.co.jp
+M:	OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
 S:	Maintained
 F:	Documentation/filesystems/vfat.txt
 F:	fs/fat/
 
 VIA RHINE NETWORK DRIVER
-P:	Roger Luethi
-M:	rl@hellgate.ch
+M:	Roger Luethi <rl@hellgate.ch>
 S:	Maintained
 F:	drivers/net/via-rhine.c
 
 VIAPRO SMBUS DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-viapro
 F:	drivers/i2c/busses/i2c-viapro.c
 
 VIA SD/MMC CARD CONTROLLER DRIVER
-P:	Joseph Chan
-M:	JosephChan@via.com.tw
-P:	Harald Welte
-M:	HaraldWelte@viatech.com
+M:	Joseph Chan <JosephChan@via.com.tw>
+M:	Harald Welte <HaraldWelte@viatech.com>
 S:	Maintained
 F:	drivers/mmc/host/via-sdmmc.c
 
 VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
-P:	Joseph Chan
-M:	JosephChan@via.com.tw
-P:	Scott Fang
-M:	ScottFang@viatech.com.cn
+M:	Joseph Chan <JosephChan@via.com.tw>
+M:	Scott Fang <ScottFang@viatech.com.cn>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/via/
 
 VIA VELOCITY NETWORK DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
+M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/via-velocity.*
 
 VLAN (802.1Q)
-P:	Patrick McHardy
-M:	kaber@trash.net
+M:	Patrick McHardy <kaber@trash.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/macvlan.c
@@ -6305,18 +5484,15 @@ F:	include/linux/if_*vlan.h
 F:	net/8021q/
 
 VLYNQ BUS
-P:	Florian Fainelli
-M:	florian@openwrt.org
+M:	Florian Fainelli <florian@openwrt.org>
 L:	openwrt-devel@lists.openwrt.org
 S:	Maintained
 F:	drivers/vlynq/vlynq.c
 F:	include/linux/vlynq.h
 
 VOLTAGE AND CURRENT REGULATOR FRAMEWORK
-P:	Liam Girdwood
-M:	lrg@slimlogic.co.uk
-P:	Mark Brown
-M:	broonie@opensource.wolfsonmicro.com
+M:	Liam Girdwood <lrg@slimlogic.co.uk>
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 W:	http://opensource.wolfsonmicro.com/node/15
 W:	http://www.slimlogic.co.uk/?p=48
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git
@@ -6325,52 +5501,45 @@ F:	drivers/regulator/
 F:	include/linux/regulator/
 
 VT1211 HARDWARE MONITOR DRIVER
-P:	Juerg Haefliger
-M:	juergh@gmail.com
+M:	Juerg Haefliger <juergh@gmail.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/vt1211
 F:	drivers/hwmon/vt1211.c
 
 VT8231 HARDWARE MONITOR DRIVER
-P:	Roger Lucas
-M:	vt8231@hiddenengine.co.uk
+M:	Roger Lucas <vt8231@hiddenengine.co.uk>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/vt8231.c
 
 W1 DALLAS'S 1-WIRE BUS
-P:	Evgeniy Polyakov
-M:	johnpol@2ka.mipt.ru
+M:	Evgeniy Polyakov <johnpol@2ka.mipt.ru>
 S:	Maintained
 F:	Documentation/w1/
 F:	drivers/w1/
 
 W83791D HARDWARE MONITORING DRIVER
-P:	Marc Hulsman
-M:	m.hulsman@tudelft.nl
+M:	Marc Hulsman <m.hulsman@tudelft.nl>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/w83791d
 F:	drivers/hwmon/w83791d.c
 
 W83793 HARDWARE MONITORING DRIVER
-P:	Rudolf Marek
-M:	r.marek@assembler.cz
+M:	Rudolf Marek <r.marek@assembler.cz>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/w83793
 F:	drivers/hwmon/w83793.c
 
 W83L51xD SD/MMC CARD INTERFACE DRIVER
-P:	Pierre Ossman
-M:	pierre@ossman.eu
+M:	Pierre Ossman <pierre@ossman.eu>
 S:	Maintained
 F:	drivers/mmc/host/wbsd.*
 
 WATCHDOG DEVICE DRIVERS
-P:	Wim Van Sebroeck
-M:	wim@iguana.be
+M:	Wim Van Sebroeck <wim@iguana.be>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
 S:	Maintained
 F:	Documentation/watchdog/
@@ -6378,8 +5547,7 @@ F:	drivers/watchdog/
 F:	include/linux/watchdog.h
 
 WAVELAN NETWORK DRIVER & WIRELESS EXTENSIONS
-P:	Jean Tourrilhes
-M:	jt@hpl.hp.com
+M:	Jean Tourrilhes <jt@hpl.hp.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/
 S:	Maintained
@@ -6387,46 +5555,39 @@ F:	Documentation/networking/wavelan.txt
 F:	drivers/net/wireless/wavelan*
 
 WD7000 SCSI DRIVER
-P:	Miroslav Zagorac
-M:	zaga@fly.cc.fer.hr
+M:	Miroslav Zagorac <zaga@fly.cc.fer.hr>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/wd7000.c
 
 WIMAX STACK
-P:	Inaky Perez-Gonzalez
-M:	inaky.perez-gonzalez@intel.com
+M:	Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
 M:	linux-wimax@intel.com
 L:	wimax@linuxwimax.org
 S:	Supported
 W:	http://linuxwimax.org
 
 WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM
-P:	David Vrabel
-M:	david.vrabel@csr.com
+M:	David Vrabel <david.vrabel@csr.com>
 S:	Maintained
 F:	include/linux/wlp.h
 F:	drivers/uwb/wlp/
 
 WISTRON LAPTOP BUTTON DRIVER
-P:	Miloslav Trmac
-M:	mitr@volny.cz
+M:	Miloslav Trmac <mitr@volny.cz>
 S:	Maintained
 F:	drivers/input/misc/wistron_btns.c
 
 WL3501 WIRELESS PCMCIA CARD DRIVER
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://oops.ghostprotocols.net:81/blog
 S:	Maintained
 F:	drivers/net/wireless/wl3501*
 
 WM97XX TOUCHSCREEN DRIVERS
-P:	Mark Brown
-M:	broonie@opensource.wolfsonmicro.com
-P:	Liam Girdwood
-M:	lrg@slimlogic.co.uk
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+M:	Liam Girdwood <lrg@slimlogic.co.uk>
 L:	linux-input@vger.kernel.org
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-touch
 W:	http://opensource.wolfsonmicro.com/node/7
@@ -6435,8 +5596,7 @@ F:	drivers/input/touchscreen/*wm97*
 F:	include/linux/wm97xx.h
 
 X.25 NETWORK LAYER
-P:	Henner Eisen
-M:	eis@baty.hanse.de
+M:	Henner Eisen <eis@baty.hanse.de>
 L:	linux-x25@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/x25*
@@ -6444,12 +5604,9 @@ F:	include/net/x25*
 F:	net/x25/
 
 X86 ARCHITECTURE (32-BIT AND 64-BIT)
-P:	Thomas Gleixner
-M:	tglx@linutronix.de
-P:	Ingo Molnar
-M:	mingo@redhat.com
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	Thomas Gleixner <tglx@linutronix.de>
+M:	Ingo Molnar <mingo@redhat.com>
+M:	"H. Peter Anvin" <hpa@zytor.com>
 M:	x86@kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
 S:	Maintained
@@ -6457,10 +5614,8 @@ F:	Documentation/x86/
 F:	arch/x86/
 
 XEN HYPERVISOR INTERFACE
-P:	Jeremy Fitzhardinge
-M:	jeremy@xensource.com
-P:	Chris Wright
-M:	chrisw@sous-sol.org
+M:	Jeremy Fitzhardinge <jeremy@xensource.com>
+M:	Chris Wright <chrisw@sous-sol.org>
 L:	virtualization@lists.osdl.org
 L:	xen-devel@lists.xensource.com
 S:	Supported
@@ -6472,8 +5627,7 @@ F:	include/xen/
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
-P:	Felix Blyakher
-M:	felixb@sgi.com
+M:	Felix Blyakher <felixb@sgi.com>
 M:	xfs-masters@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs
@@ -6483,38 +5637,33 @@ F:	Documentation/filesystems/xfs.txt
 F:	fs/xfs/
 
 XILINX SYSTEMACE DRIVER
-P:	Grant Likely
-M:	grant.likely@secretlab.ca
+M:	Grant Likely <grant.likely@secretlab.ca>
 W:	http://www.secretlab.ca/
 S:	Maintained
 F:	drivers/block/xsysace.c
 
 XILINX UARTLITE SERIAL DRIVER
-P:	Peter Korsgaard
-M:	jacmet@sunsite.dk
+M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/serial/uartlite.c
 
 YAM DRIVER FOR AX.25
-P:	Jean-Paul Roubelat
-M:	jpr@f6fbb.org
+M:	Jean-Paul Roubelat <jpr@f6fbb.org>
 L:	linux-hams@vger.kernel.org
 S:	Maintained
 F:	drivers/net/hamradio/yam*
 F:	include/linux/yam.h
 
 YEALINK PHONE DRIVER
-P:	Henk Vergonet
-M:	Henk.Vergonet@gmail.com
+M:	Henk Vergonet <Henk.Vergonet@gmail.com>
 L:	usbb2k-api-dev@nongnu.org
 S:	Maintained
 F:	Documentation/input/yealink.txt
 F:	drivers/input/misc/yealink.*
 
 Z8530 DRIVER FOR AX.25
-P:	Joerg Reuter
-M:	jreuter@yaina.de
+M:	Joerg Reuter <jreuter@yaina.de>
 W:	http://yaina.de/jreuter/
 W:	http://www.qsl.net/dl1bke/
 L:	linux-hams@vger.kernel.org
@@ -6524,10 +5673,8 @@ F:	drivers/net/hamradio/*scc.c
 F:	drivers/net/hamradio/z8530.h
 
 ZD1211RW WIRELESS DRIVER
-P:	Daniel Drake
-M:	dsd@gentoo.org
-P:	Ulrich Kunitz
-M:	kune@deine-taler.de
+M:	Daniel Drake <dsd@gentoo.org>
+M:	Ulrich Kunitz <kune@deine-taler.de>
 W:	http://zd1211.ath.cx/wiki/DriverRewrite
 L:	linux-wireless@vger.kernel.org
 L:	zd1211-devs@lists.sourceforge.net (subscribers-only)
@@ -6543,14 +5690,12 @@ S:	Odd Fixes
 F:	drivers/media/video/zoran/
 
 ZS DECSTATION Z85C30 SERIAL DRIVER
-P:	Maciej W. Rozycki
-M:	macro@linux-mips.org
+M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/serial/zs.*
 
 THE REST
-P:	Linus Torvalds
-M:	torvalds@linux-foundation.org
+M:	Linus Torvalds <torvalds@linux-foundation.org>
 L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
 S:	Buried alive in reporters
diff --git a/Makefile b/Makefile
index d1216fea0c9..60de4ef3125 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 31
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -140,15 +140,13 @@ _all: modules
 endif
 
 srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
-TOPDIR		:= $(srctree)
-# FIXME - TOPDIR is obsolete, use srctree/objtree
 objtree		:= $(CURDIR)
 src		:= $(srctree)
 obj		:= $(objtree)
 
 VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 
-export srctree objtree VPATH TOPDIR
+export srctree objtree VPATH
 
 
 # SUBARCH tells the usermode build what the underlying arch is.  That is set
@@ -344,7 +342,9 @@ KBUILD_CPPFLAGS := -D__KERNEL__
 
 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
-		   -Werror-implicit-function-declaration
+		   -Werror-implicit-function-declaration \
+		   -Wno-format-security \
+		   -fno-delete-null-pointer-checks
 KBUILD_AFLAGS   := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -566,7 +566,7 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 
 # disable invalid "can't wrap" optimizations for signed / pointers
-KBUILD_CFLAGS	+= $(call cc-option,-fwrapv)
+KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
 # revert to pre-gcc-4.4 behaviour of .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
diff --git a/REPORTING-BUGS b/REPORTING-BUGS
index ab0c56630a8..55a6074ccbb 100644
--- a/REPORTING-BUGS
+++ b/REPORTING-BUGS
@@ -15,7 +15,10 @@ worry too much about getting the wrong person. If you are unsure send it
 to the person responsible for the code relevant to what you were doing.
 If it occurs repeatably try and describe how to recreate it. That is
 worth even more than the oops itself.  The list of maintainers and
-mailing lists is in the MAINTAINERS file in this directory.
+mailing lists is in the MAINTAINERS file in this directory.  If you
+know the file name that causes the problem you can use the following
+command in this directory to find some of the maintainers of that file:
+     perl scripts/get_maintainer.pl -f <filename>
 
       If it is a security bug, please copy the Security Contact listed
 in the MAINTAINERS file.  They can help coordinate bugfix and disclosure.
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 06c5c7a4afd..b663f1f10b6 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -30,7 +30,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #ifndef MODULE
 #define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
 #else
 /*
  * To calculate addresses of locally defined variables, GCC uses 32-bit
@@ -49,7 +49,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 		: "=&r"(__ptr), "=&r"(tmp_gp));		\
 	(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
 
-#define PER_CPU_ATTRIBUTES	__used
+#define PER_CPU_DEF_ATTRIBUTES	__used
 
 #endif /* MODULE */
 
@@ -71,7 +71,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 #define __get_cpu_var(var)		per_cpu_var(var)
 #define __raw_get_cpu_var(var)		per_cpu_var(var)
 
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
 
 #endif /* SMP */
 
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index d069526bd76..60c83abfde7 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -37,6 +37,7 @@ struct thread_info {
 	.task		= &tsk,			\
 	.exec_domain	= &default_exec_domain,	\
 	.addr_limit	= KERNEL_DS,		\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/alpha/include/asm/tlb.h b/arch/alpha/include/asm/tlb.h
index c13636575fb..42866759f3f 100644
--- a/arch/alpha/include/asm/tlb.h
+++ b/arch/alpha/include/asm/tlb.h
@@ -9,7 +9,7 @@
 
 #include <asm-generic/tlb.h>
 
-#define __pte_free_tlb(tlb, pte)			pte_free((tlb)->mm, pte)
-#define __pmd_free_tlb(tlb, pmd)			pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, address)		pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, address)		pmd_free((tlb)->mm, pmd)
  
 #endif
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c
index 1e9ad52c460..e072041d19f 100644
--- a/arch/alpha/kernel/ptrace.c
+++ b/arch/alpha/kernel/ptrace.c
@@ -8,7 +8,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..be8ebe3760d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1455,6 +1455,8 @@ source "drivers/usb/Kconfig"
 
 source "drivers/uwb/Kconfig"
 
+source "drivers/ar6000/Kconfig"
+
 source "drivers/mmc/Kconfig"
 
 source "drivers/memstick/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a71fd941ade..a89e4734b8f 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -99,14 +99,6 @@ config DEBUG_CLPS711X_UART2
 	  output to the second serial port on these devices.  Saying N will
 	  cause the debug messages to appear on the first serial port.
 
-config DEBUG_S3C_PORT
-	depends on DEBUG_LL && PLAT_S3C
-	bool "Kernel low-level debugging messages via S3C UART"
-	help
-	  Say Y here if you want debug print routines to go to one of the
-	  S3C internal UARTs. The chosen UART must have been configured
-	  before it is used.
-
 config DEBUG_S3C_UART
 	depends on PLAT_S3C
 	int "S3C UART to use for low-level debug"
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 9e6e512f011..17153b54613 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -29,7 +29,6 @@ unsigned int __machine_arch_type;
 
 static void putstr(const char *ptr);
 
-#include <linux/compiler.h>
 #include <mach/uncompress.h>
 
 #ifdef CONFIG_DEBUG_ICEDCC
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index f37afd9422f..aae5bc01acc 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <linux/string.h>
 #include <linux/mutex.h>
+#include <linux/clk.h>
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
diff --git a/arch/arm/configs/gta02_defconfig b/arch/arm/configs/gta02_defconfig
new file mode 100644
index 00000000000..efc6d94a693
--- /dev/null
+++ b/arch/arm/configs/gta02_defconfig
@@ -0,0 +1,1693 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31
+# Fri Oct  9 11:35:24 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_FIQ=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+CONFIG_ARCH_S3C2410=y
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C24XX=y
+CONFIG_S3C2410_CLOCK=y
+CONFIG_CPU_S3C244X=y
+CONFIG_S3C24XX_PWM=y
+CONFIG_S3C24XX_GPIO_EXTRA=64
+CONFIG_S3C24XX_GPIO_EXTRA64=y
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+# CONFIG_S3C24XX_ADC is not set
+CONFIG_PLAT_S3C=y
+CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
+CONFIG_CPU_LLSERIAL_S3C2440=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_WATCHDOG is not set
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+# CONFIG_S3C2410_PM_DEBUG is not set
+# CONFIG_S3C2410_PM_CHECK is not set
+CONFIG_S3C_LOWLEVEL_UART_PORT=2
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_DMA=y
+CONFIG_S3C_PWM=y
+CONFIG_S3C_DEV_USB_HOST=y
+
+#
+# S3C2400 Machines
+#
+CONFIG_CPU_S3C2410_DMA=y
+CONFIG_S3C2410_PM=y
+CONFIG_S3C2410_GPIO=y
+
+#
+# S3C2410 Machines
+#
+# CONFIG_ARCH_SMDK2410 is not set
+# CONFIG_ARCH_H1940 is not set
+# CONFIG_MACH_N30 is not set
+# CONFIG_ARCH_BAST is not set
+# CONFIG_MACH_OTOM is not set
+# CONFIG_MACH_AML_M5900 is not set
+# CONFIG_MACH_TCT_HAMMER is not set
+# CONFIG_MACH_VR1000 is not set
+# CONFIG_MACH_QT2410 is not set
+
+#
+# S3C2412 Machines
+#
+# CONFIG_MACH_JIVE is not set
+# CONFIG_MACH_SMDK2413 is not set
+# CONFIG_MACH_SMDK2412 is not set
+# CONFIG_MACH_VSTMS is not set
+
+#
+# S3C2440 Machines
+#
+# CONFIG_MACH_ANUBIS is not set
+# CONFIG_MACH_OSIRIS is not set
+# CONFIG_MACH_RX3715 is not set
+# CONFIG_ARCH_S3C2440 is not set
+# CONFIG_MACH_NEXCODER_2440 is not set
+# CONFIG_MACH_AT2440EVB is not set
+# CONFIG_MACH_MINI2440 is not set
+CONFIG_CPU_S3C2442=y
+
+#
+# S3C2442 Machines
+#
+CONFIG_MACH_NEO1973_GTA02=y
+
+#
+# S3C2443 Machines
+#
+# CONFIG_MACH_SMDK2443 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=200
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="unused -- bootloader passes ATAG list"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+CONFIG_TCP_MD5SIG=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=y
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+CONFIG_MTD_ABSENT=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_S3C2410=y
+# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
+# CONFIG_MTD_NAND_S3C2410_HWECC is not set
+# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_PCF50633_PMU=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S3C2440=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_S3C2410=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_S3C24XX=y
+CONFIG_SPI_S3C24XX_GPIO=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_CHARGER_PCF50633=y
+CONFIG_BATTERY_BQ27000_HDQ=y
+CONFIG_HDQ_GPIO_BITBANG=y
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_S3C2410_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+CONFIG_MFD_PCF50633=y
+CONFIG_PCF50633_ADC=y
+CONFIG_PCF50633_GPIO=y
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_MFD_GLAMO=y
+CONFIG_MFD_GLAMO_FB=y
+CONFIG_MFD_GLAMO_GPIO=y
+# CONFIG_MFD_GLAMO_MCI is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_S3C2410 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_LCD_JBT6K74=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_PWM is not set
+CONFIG_BACKLIGHT_PCF50633=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_S3C24XX_SOC=m
+CONFIG_SND_S3C24XX_SOC_I2S=m
+CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753=m
+# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
+# CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM8753=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+CONFIG_USB_GADGET_S3C2410=y
+CONFIG_USB_S3C2410=y
+# CONFIG_USB_S3C2410_DEBUG is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_AR6000_WLAN=y
+# CONFIG_AR6000_WLAN_DEBUG is not set
+# CONFIG_AR6000_WLAN_RESET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_S3C is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_S3C24XX is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_GTA02_VIBRATOR=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_PCF50633=y
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_S3C=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_PCF50633=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_S3C_UART=2
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_PCOMP=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_ZLIB=y
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index 8e74c66f239..605a8462f17 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -1,109 +1,246 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc2
-# Sun Aug 14 19:26:59 2005
+# Linux kernel version: 2.6.30-rc8
+# Wed Jun  3 13:52:33 2009
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
+CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
-# Loadable module support
+# IO Schedulers
 #
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
 
 #
 # System Type
 #
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
 CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
 
 #
-# AT91RM9200 Implementations
+# AT91RM9200 Board Type
 #
+# CONFIG_MACH_ONEARM is not set
 # CONFIG_ARCH_AT91RM9200DK is not set
 # CONFIG_MACH_AT91RM9200EK is not set
 # CONFIG_MACH_CSB337 is not set
 # CONFIG_MACH_CSB637 is not set
 # CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_KB9200=y
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
@@ -112,23 +249,48 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -137,8 +299,16 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x10000000
 CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -149,74 +319,251 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
 #
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
 
 #
-# Device Drivers
+# Networking options
 #
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
-# Generic Driver Options
+# Network testing
 #
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-CONFIG_DEBUG_DRIVER=y
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Memory Technology Devices (MTD)
+# Device Drivers
 #
-# CONFIG_MTD is not set
 
 #
-# Parallel port support
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 
 #
-# IO Schedulers
+# EEPROM support
 #
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -232,145 +579,87 @@ CONFIG_CHR_DEV_SG=y
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_NET_RADIO is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -380,7 +669,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -390,23 +678,25 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -419,215 +709,362 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# IPMI
+# Memory mapped GPIO expanders:
 #
-# CONFIG_IPMI_HANDLER is not set
 
 #
-# Watchdog Cards
+# I2C GPIO expanders:
 #
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_AT91RM9200_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
+# PCI GPIO expanders:
 #
-# CONFIG_RAW_DRIVER is not set
 
 #
-# TPM devices
+# SPI GPIO expanders:
 #
-# CONFIG_AT91_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# I2C support
+# Watchdog Device Drivers
 #
-# CONFIG_I2C is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
 
 #
-# USB HID Boot Protocol drivers
+# also be needed; see USB_STORAGE Help for more info
 #
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
 
 #
 # USB Imaging devices
 #
+# CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
+# USB port drivers
 #
-# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_SERIAL is not set
 
 #
-# Video4Linux support is needed for USB Multimedia device support
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
 
 #
-# USB Network Adapters
+# OTG and related infrastructure
 #
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# USB port drivers
+# MMC/SD/SDIO Card Drivers
 #
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# USB Serial Converter support
+# MMC/SD/SDIO Host Controller Drivers
 #
-# CONFIG_USB_SERIAL is not set
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# USB Miscellaneous drivers
+# RTC interfaces
 #
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# USB DSL modem support
+# SPI RTC drivers
 #
 
 #
-# USB Gadget Support
+# Platform RTC drivers
 #
-# CONFIG_USB_GADGET is not set
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# MMC/SD Card support
+# on-CPU RTC drivers
 #
-# CONFIG_MMC is not set
+CONFIG_RTC_DRV_AT91RM9200=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
-# XFS support
+# Caches
 #
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -639,7 +1076,7 @@ CONFIG_AUTOFS4_FS=y
 # DOS/FAT/NT Filesystems
 #
 CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
@@ -649,53 +1086,70 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
+# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
@@ -719,7 +1173,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -733,47 +1187,119 @@ CONFIG_NLS_ASCII=y
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 0a1abb978d7..af74cc2de8b 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -629,7 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_AHCI=y
 # CONFIG_SATA_SIL24 is not set
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index 083516cd0d7..75263a83741 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -1,15 +1,15 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr  8 10:18:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Fri Jul 24 16:08:06 2009
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -85,7 +84,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -99,6 +103,12 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -111,7 +121,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,13 +148,14 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -153,25 +164,25 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
@@ -188,6 +199,8 @@ CONFIG_MACH_MX27=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_PCM970_BASEBOARD=y
+CONFIG_MACH_MX27_3DS=y
+CONFIG_MACH_MX27LITE=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 
@@ -213,7 +226,6 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -238,7 +250,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -253,10 +264,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -361,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -474,7 +487,16 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -485,7 +507,15 @@ CONFIG_MTD_PHYSMAP=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -494,7 +524,21 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -508,7 +552,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -534,6 +577,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 CONFIG_FEC=y
 # CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
@@ -580,6 +625,11 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -592,6 +642,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -644,6 +695,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
 # CONFIG_I2C_OCORES is not set
@@ -668,7 +720,6 @@ CONFIG_I2C_IMX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -719,6 +770,7 @@ CONFIG_W1=y
 #
 # CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_DS1WM is not set
 # CONFIG_W1_MASTER_GPIO is not set
 
 #
@@ -753,54 +805,16 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -917,6 +931,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -962,12 +977,15 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1021,6 +1039,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1119,25 +1143,11 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1151,16 +1161,104 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1168,6 +1266,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 20ada526f6d..a4f9a2a8149 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,15 +1,15 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr  8 11:06:37 2009
+# Linux kernel version: 2.6.31-rc4
+# Tue Jul 28 14:11:34 2009
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -86,7 +85,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -97,6 +101,11 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -109,7 +118,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -136,13 +145,14 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -151,25 +161,25 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
@@ -178,6 +188,7 @@ CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_MX2 is not set
 CONFIG_ARCH_MX3=y
 CONFIG_ARCH_MX31=y
+CONFIG_ARCH_MX35=y
 
 #
 # MX3 platforms:
@@ -185,12 +196,19 @@ CONFIG_ARCH_MX31=y
 CONFIG_MACH_MX31ADS=y
 CONFIG_MACH_MX31ADS_WM1133_EV1=y
 CONFIG_MACH_PCM037=y
+CONFIG_MACH_PCM037_EET=y
 CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_MX31_3DS=y
 CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_MX31LILLY=y
 CONFIG_MACH_QONG=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_ARMADILLO5X0=y
+CONFIG_MACH_MX35_3DS=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
+CONFIG_ARCH_HAS_RNGA=y
+CONFIG_ARCH_MXC_IOMUX_V3=y
 
 #
 # Processor Type
@@ -218,6 +236,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_L2X0=y
+# CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -242,7 +261,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -257,10 +275,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -362,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -465,7 +485,16 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -476,10 +505,30 @@ CONFIG_MTD_PHYSMAP=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -493,7 +542,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -528,7 +576,7 @@ CONFIG_MII=y
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
+CONFIG_DNET=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -537,8 +585,10 @@ CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_CS89x0=y
-CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -609,6 +659,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
 # CONFIG_I2C_OCORES is not set
@@ -633,7 +684,6 @@ CONFIG_I2C_IMX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -669,6 +719,7 @@ CONFIG_W1=y
 #
 # CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_DS1WM is not set
 # CONFIG_W1_MASTER_GPIO is not set
 
 #
@@ -703,6 +754,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
@@ -711,10 +764,8 @@ CONFIG_MFD_WM8350_CONFIG_MODE_0=y
 CONFIG_MFD_WM8352_CONFIG_MODE_0=y
 CONFIG_MFD_WM8350_I2C=y
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
+# CONFIG_AB3100_CORE is not set
+CONFIG_MEDIA_SUPPORT=y
 
 #
 # Multimedia core support
@@ -758,8 +809,10 @@ CONFIG_SOC_CAMERA_MT9T031=y
 CONFIG_SOC_CAMERA_MT9V022=y
 CONFIG_SOC_CAMERA_TW9910=y
 # CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_SOC_CAMERA_OV772X=y
+CONFIG_MX3_VIDEO=y
 CONFIG_VIDEO_MX3=y
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
 
@@ -847,8 +900,11 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_WM8350=y
+# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -861,10 +917,12 @@ CONFIG_REGULATOR_WM8350=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -921,6 +979,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -937,6 +1001,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -979,22 +1044,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_ARM_UNWIND=y
@@ -1094,9 +1144,9 @@ CONFIG_CRYPTO_DES=y
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_LZO=y
 
 #
 # Random Number Generation
@@ -1109,9 +1159,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1119,6 +1170,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index 28be17fbc15..d5ff4776cd0 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -1107,7 +1107,7 @@ CONFIG_USB_ZERO=m
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
+# CONFIG_TWL4030_USB is not set
 # CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index eb2cb31825c..f238df66efd 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -1354,7 +1354,7 @@ CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-CONFIG_MMC=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
@@ -1449,7 +1449,8 @@ CONFIG_RTC_DRV_TWL4030=m
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2d58b8fe59b..b49810461e4 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -260,6 +260,7 @@ CONFIG_MACH_NEXCODER_2440=y
 CONFIG_SMDK2440_CPU2440=y
 CONFIG_MACH_AT2440EVB=y
 CONFIG_CPU_S3C2442=y
+CONFIG_MACH_MINI2440=y
 
 #
 # S3C2442 Machines
@@ -2298,7 +2299,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 2e8fa50e9a0..32860609e05 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -816,7 +816,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 07dfb98df4f..9d32faef05f 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -857,7 +857,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_S3C_PORT is not set
 CONFIG_DEBUG_S3C_UART=0
 
 #
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 2d827e12114..7d61ae6e75d 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Mon Jun  1 09:18:22 2009
+# Linux kernel version: 2.6.31-rc3
+# Thu Jul 16 23:36:10 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +17,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -68,7 +66,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -81,8 +78,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 # CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -94,6 +96,10 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -106,7 +112,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,9 +144,9 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -216,8 +222,8 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -243,7 +249,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -258,17 +263,18 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -359,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -497,6 +504,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -533,12 +541,14 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -597,9 +607,11 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+CONFIG_I2C_STU300=y
 
 #
 # External I2C/SMBus adapter drivers
@@ -620,7 +632,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -635,6 +646,7 @@ CONFIG_SPI_MASTER=y
 #
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PL022=y
 
 #
 # SPI Protocol Masters
@@ -647,6 +659,7 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -657,6 +670,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+CONFIG_COH901327_WATCHDOG=y
 CONFIG_SSB_POSSIBLE=y
 
 #
@@ -678,22 +692,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+CONFIG_AB3100_CORE=y
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -760,6 +761,11 @@ CONFIG_SND_JACK=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
@@ -770,7 +776,7 @@ CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_DEBUG=y
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
@@ -797,7 +803,7 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
@@ -845,6 +851,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -887,7 +894,10 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -900,16 +910,19 @@ CONFIG_REGULATOR=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
 
 #
 # Caches
@@ -1033,6 +1046,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1063,18 +1077,16 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 9e07fe50702..9ed2377fe8e 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -159,8 +159,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 
 #else /* ARM_ARCH_6 */
 
-#include <asm/system.h>
-
 #ifdef CONFIG_SMP
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h
index 2242ce22ec6..7ade2b8445d 100644
--- a/arch/arm/include/asm/fiq.h
+++ b/arch/arm/include/asm/fiq.h
@@ -29,8 +29,9 @@ struct fiq_handler {
 extern int claim_fiq(struct fiq_handler *f);
 extern void release_fiq(struct fiq_handler *f);
 extern void set_fiq_handler(void *start, unsigned int length);
-extern void set_fiq_regs(struct pt_regs *regs);
-extern void get_fiq_regs(struct pt_regs *regs);
+extern void set_fiq_c_handler(void (*handler)(void));
+extern void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs);
+extern void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs);
 extern void enable_fiq(int fiq);
 extern void disable_fiq(int fiq);
 
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index be962c1349c..9c746af1bf6 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -12,7 +12,7 @@
 
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT		12
-#define PAGE_SIZE		(1UL << PAGE_SHIFT)
+#define PAGE_SIZE		(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK		(~(PAGE_SIZE-1))
 
 #ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 1cd2d6416bd..c433c6c7311 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -285,15 +285,6 @@ extern struct page *empty_zero_page;
 #define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
 #define pte_special(pte)	(0)
 
-/*
- * The following only works if pte_present() is not true.
- */
-#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 2)
-#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
-
-#define PTE_FILE_MAX_BITS	30
-
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
 
@@ -384,16 +375,50 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
-/* Encode and decode a swap entry.
+/*
+ * Encode and decode a swap entry.  Swap entries are stored in the Linux
+ * page tables as follows:
  *
- * We support up to 32GB of swap on 4k machines
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <--------------- offset --------------------> <--- type --> 0 0
+ *
+ * This gives us up to 127 swap files and 32GB per swap file.  Note that
+ * the offset field is always non-zero.
  */
-#define __swp_type(x)		(((x).val >> 2) & 0x7f)
-#define __swp_offset(x)		((x).val >> 9)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __SWP_TYPE_SHIFT	2
+#define __SWP_TYPE_BITS		7
+#define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+
+#define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
+#define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
 
+/*
+ * It is an error for the kernel to have more swap files than we can
+ * encode in the PTEs.  This ensures that we know when MAX_SWAPFILES
+ * is increased beyond what we presently support.
+ */
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
+/*
+ * Encode and decode a file entry.  File entries are stored in the Linux
+ * page tables as follows:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <------------------------ offset -------------------------> 1 0
+ */
+#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 2)
+#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS	30
+
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 /* FIXME: this is not correct */
 #define kern_addr_valid(addr)	(1)
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index ee1304f22f9..5ccce0a9b03 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -201,7 +201,8 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn }
 struct membank {
 	unsigned long start;
 	unsigned long size;
-	int           node;
+	unsigned short node;
+	unsigned short highmem;
 };
 
 struct meminfo {
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 4f8848260ee..73394e50cbc 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -73,7 +73,7 @@ struct thread_info {
 	.task		= &tsk,						\
 	.exec_domain	= &default_exec_domain,				\
 	.flags		= 0,						\
-	.preempt_count	= 1,						\
+	.preempt_count	= INIT_PREEMPT_COUNT,				\
 	.addr_limit	= KERNEL_DS,					\
 	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
 			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 321c83e43a1..f41a6f57cd1 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
+#define pte_free_tlb(tlb, ptep, addr)	pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41..8c3de1a350b 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -148,7 +148,7 @@ trace:
 	sub r0, r0, #MCOUNT_INSN_SIZE
 	mov lr, pc
 	mov pc, r2
-	mov lr, r1				@ restore lr
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 #endif /* CONFIG_DYNAMIC_FTRACE */
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index 6ff7919613d..c07691ef4c0 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -8,6 +8,8 @@
  *
  *  FIQ support re-written by Russell King to be more generic
  *
+ *  FIQ handler in C supoprt written by Andy Green <andy@openmoko.com>
+ *
  * We now properly support a method by which the FIQ handlers can
  * be stacked onto the vector.  We still do not support sharing
  * the FIQ vector itself.
@@ -124,6 +126,83 @@ void __naked get_fiq_regs(struct pt_regs *regs)
 	: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
 }
 
+/* -------- FIQ handler in C ---------
+ *
+ * Major Caveats for using this
+ *  ---------------------------
+ *  *
+ *  * 1) it CANNOT touch any vmalloc()'d memory, only memory
+ *    that was kmalloc()'d.  Static allocations in the monolithic kernel
+ *    are kmalloc()'d so they are okay.  You can touch memory-mapped IO, but
+ *    the pointer for it has to have been stored in kmalloc'd memory.  The
+ *    reason for this is simple: every now and then Linux turns off interrupts
+ *    and reorders the paging tables.  If a FIQ happens during this time, the
+ *    virtual memory space can be partly or entirely disordered or missing.
+ *
+ * 2) Because vmalloc() is used when a module is inserted, THIS FIQ
+ *    ISR HAS TO BE IN THE MONOLITHIC KERNEL, not a module.  But the way
+ *    it is set up, you can all to enable and disable it from your module
+ *    and intercommunicate with it through struct fiq_ipc
+ *    fiq_ipc which you can define in
+ *    asm/archfiq_ipc_type.h.  The reason is the same as above, a
+ *    FIQ could happen while even the ISR is not present in virtual memory
+ *    space due to pagetables being changed at the time.
+ *
+ * 3) You can't call any Linux API code except simple macros
+ *    - understand that FIQ can come in at any time, no matter what
+ *      state of undress the kernel may privately be in, thinking it
+ *      locked the door by turning off interrupts... FIQ is an
+ *      unstoppable monster force (which is its value)
+ *    - they are not vmalloc()'d memory safe
+ *    - they might do crazy stuff like sleep: FIQ pisses fire and
+ *      is not interested in 'sleep' that the weak seem to need
+ *    - calling APIs from FIQ can re-enter un-renterable things
+ *    - summary: you cannot interoperate with linux APIs directly in the FIQ ISR
+ *
+ * If you follow these rules, it is fantastic, an extremely powerful, solid,
+ * genuine hard realtime feature.
+ */
+
+static void (*current_fiq_c_isr)(void);
+#define FIQ_C_ISR_STACK_SIZE 	256
+
+static void __attribute__((naked)) __jump_to_isr(void)
+{
+	asm __volatile__ ("mov pc, r8");
+}
+
+
+static void __attribute__((naked)) __actual_isr(void)
+{
+	asm __volatile__ (
+		"stmdb	sp!, {r0-r12, lr};"
+		"mov     fp, sp;"
+	);
+
+	current_fiq_c_isr();
+
+	asm __volatile__ (
+		"ldmia	sp!, {r0-r12, lr};"
+		"subs	pc, lr, #4;"
+	);
+}
+
+void set_fiq_c_handler(void (*isr)(void))
+{
+	struct pt_regs regs;
+
+	memset(&regs, 0, sizeof(regs));
+	regs.ARM_r8 = (unsigned long) __actual_isr;
+	regs.ARM_sp = 0xffff001c + FIQ_C_ISR_STACK_SIZE;
+
+	set_fiq_handler(__jump_to_isr, 4);
+
+	current_fiq_c_isr = isr;
+
+	set_fiq_regs(&regs);
+}
+/* -------- FIQ handler in C ---------*/
+
 int claim_fiq(struct fiq_handler *f)
 {
 	int ret = 0;
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 096f600dc8d..b7c3490eaa2 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -98,17 +98,6 @@ unlock:
 	return 0;
 }
 
-/* Handle bad interrupts */
-static struct irq_desc bad_irq_desc = {
-	.handle_irq = handle_bad_irq,
-	.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
-};
-
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* We are not allocating bad_irq_desc.affinity or .pending_mask */
-#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
-#endif
-
 /*
  * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
  * come via this function.  Instead, they should provide their
@@ -124,10 +113,13 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	 * Some hardware gives randomly wrong interrupts.  Rather
 	 * than crashing, do something sensible.
 	 */
-	if (irq >= NR_IRQS)
-		handle_bad_irq(irq, &bad_irq_desc);
-	else
+	if (unlikely(irq >= NR_IRQS)) {
+		if (printk_ratelimit())
+			printk(KERN_WARNING "Bad IRQ%u\n", irq);
+		ack_bad_irq(irq);
+	} else {
 		generic_handle_irq(irq);
+	}
 
 	/* AT91 specific workaround */
 	irq_finish(irq);
@@ -165,10 +157,6 @@ void __init init_IRQ(void)
 	for (irq = 0; irq < NR_IRQS; irq++)
 		irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
 
-#ifdef CONFIG_SMP
-	cpumask_setall(bad_irq_desc.affinity);
-	bad_irq_desc.node = smp_processor_id();
-#endif
 	init_arch_irq();
 }
 
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 93bb4247b7e..f6bc5d44278 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -133,7 +133,7 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 }
 
 #ifdef CONFIG_CRUNCH
-static int preserve_crunch_context(struct crunch_sigframe *frame)
+static int preserve_crunch_context(struct crunch_sigframe __user *frame)
 {
 	char kbuf[sizeof(*frame) + 8];
 	struct crunch_sigframe *kframe;
@@ -146,7 +146,7 @@ static int preserve_crunch_context(struct crunch_sigframe *frame)
 	return __copy_to_user(frame, kframe, sizeof(*frame));
 }
 
-static int restore_crunch_context(struct crunch_sigframe *frame)
+static int restore_crunch_context(struct crunch_sigframe __user *frame)
 {
 	char kbuf[sizeof(*frame) + 8];
 	struct crunch_sigframe *kframe;
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 4340bf3d2c8..69371028a20 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
+#include <asm/page.h>
 	
 OUTPUT_ARCH(arm)
 ENTRY(stext)
@@ -63,7 +64,7 @@ SECTIONS
 			usr/built-in.o(.init.ramfs)
 		__initramfs_end = .;
 #endif
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__per_cpu_load = .;
 		__per_cpu_start = .;
 			*(.data.percpu.page_aligned)
@@ -73,7 +74,7 @@ SECTIONS
 #ifndef CONFIG_XIP_KERNEL
 		__init_begin = _stext;
 		INIT_DATA
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
 	}
@@ -118,7 +119,7 @@ SECTIONS
 		*(.got)			/* Global offset table		*/
 	}
 
-	RODATA
+	RO_DATA(PAGE_SIZE)
 
 	_etext = .;			/* End of text and rodata section */
 
@@ -158,17 +159,17 @@ SECTIONS
 		*(.data.init_task)
 
 #ifdef CONFIG_XIP_KERNEL
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_begin = .;
 		INIT_DATA
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
 
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__nosave_begin = .;
 		*(.data.nosave)
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__nosave_end = .;
 
 		/*
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index cc270beadd5..a55398ed121 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -24,6 +24,8 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <linux/clk.h>
 
 #include <mach/hardware.h>
@@ -218,6 +220,56 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PA30,
+		.code		= BTN_3,
+		.desc		= "Button 3",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PA31,
+		.code		= BTN_4,
+		.desc		= "Button 4",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PA30, 1);	/* btn3 */
+	at91_set_deglitch(AT91_PIN_PA30, 1);
+	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* btn4 */
+	at91_set_deglitch(AT91_PIN_PA31, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c512", 0x50),
@@ -245,6 +297,8 @@ static void __init ek_board_init(void)
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* Push Buttons */
+	ek_add_device_buttons();
 	/* PCK0 provides MCLK to the WM8731 */
 	at91_set_B_periph(AT91_PIN_PC1, 0);
 	/* SSC (for WM8731) */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e12a49d1a..f6b5672cabd 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -186,19 +186,21 @@ static struct fb_monspecs at91fb_default_monspecs = {
 static void at91_lcdc_power_control(int on)
 {
 	if (on)
-		at91_set_gpio_value(AT91_PIN_PA30, 0);	/* power up */
+		at91_set_gpio_value(AT91_PIN_PC1, 0);	/* power up */
 	else
-		at91_set_gpio_value(AT91_PIN_PA30, 1);	/* power down */
+		at91_set_gpio_value(AT91_PIN_PC1, 1);	/* power down */
 }
 
 /* Driver datas */
 static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.lcdcon_is_backlight            = true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
 	.default_lcdcon2		= AT91SAM9RL_DEFAULT_LCDCON2,
 	.default_monspecs		= &at91fb_default_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
 	.guard_time			= 1,
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
 };
 
 #else
diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h
new file mode 100644
index 00000000000..187cb58345c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at_hdmac.h
@@ -0,0 +1,102 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_H
+#define AT_HDMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+	unsigned int	nr_channels;
+	dma_cap_mask_t  cap_mask;
+};
+
+/**
+ * enum at_dma_slave_width - DMA slave register access width.
+ * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
+ */
+enum at_dma_slave_width {
+	AT_DMA_SLAVE_WIDTH_8BIT = 0,
+	AT_DMA_SLAVE_WIDTH_16BIT,
+	AT_DMA_SLAVE_WIDTH_32BIT,
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @tx_reg: physical address of data register used for
+ *	memory-to-peripheral transfers
+ * @rx_reg: physical address of data register used for
+ *	peripheral-to-memory transfers
+ * @reg_width: peripheral register width
+ * @cfg: Platform-specific initializer for the CFG register
+ * @ctrla: Platform-specific initializer for the CTRLA register
+ */
+struct at_dma_slave {
+	struct device		*dma_dev;
+	dma_addr_t		tx_reg;
+	dma_addr_t		rx_reg;
+	enum at_dma_slave_width	reg_width;
+	u32			cfg;
+	u32			ctrla;
+};
+
+
+/* Platform-configurable bits in CFG */
+#define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
+#define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
+#define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
+#define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
+#define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
+#define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
+#define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
+#define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
+#define		ATC_DST_H2SEL_SW	(0x0 << 13)
+#define		ATC_DST_H2SEL_HW	(0x1 << 13)
+#define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
+#define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
+#define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
+#define	ATC_LOCK_IF_L		(0x1 << 22)	/* Master Interface Arbiter Lock */
+#define		ATC_LOCK_IF_L_CHUNK	(0x0 << 22)
+#define		ATC_LOCK_IF_L_BUFFER	(0x1 << 22)
+#define	ATC_AHB_PROT_MASK	(0x7 << 24)	/* AHB Protection */
+#define	ATC_FIFOCFG_MASK	(0x3 << 28)	/* FIFO Request Configuration */
+#define		ATC_FIFOCFG_LARGESTBURST	(0x0 << 28)
+#define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
+#define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
+
+/* Platform-configurable bits in CTRLA */
+#define	ATC_SCSIZE_MASK		(0x7 << 16)	/* Source Chunk Transfer Size */
+#define		ATC_SCSIZE_1		(0x0 << 16)
+#define		ATC_SCSIZE_4		(0x1 << 16)
+#define		ATC_SCSIZE_8		(0x2 << 16)
+#define		ATC_SCSIZE_16		(0x3 << 16)
+#define		ATC_SCSIZE_32		(0x4 << 16)
+#define		ATC_SCSIZE_64		(0x5 << 16)
+#define		ATC_SCSIZE_128		(0x6 << 16)
+#define		ATC_SCSIZE_256		(0x7 << 16)
+#define	ATC_DCSIZE_MASK		(0x7 << 20)	/* Destination Chunk Transfer Size */
+#define		ATC_DCSIZE_1		(0x0 << 20)
+#define		ATC_DCSIZE_4		(0x1 << 20)
+#define		ATC_DCSIZE_8		(0x2 << 20)
+#define		ATC_DCSIZE_16		(0x3 << 20)
+#define		ATC_DCSIZE_32		(0x4 << 20)
+#define		ATC_DCSIZE_64		(0x5 << 20)
+#define		ATC_DCSIZE_128		(0x6 << 20)
+#define		ATC_DCSIZE_256		(0x7 << 20)
+
+#endif /* AT_HDMAC_H */
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 5ac2f565d86..d6ab64ccd49 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -37,7 +37,6 @@
 #include <mach/serial.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
-#include <mach/common.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 28c9008df4f..84ad5d161a8 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -36,7 +36,6 @@
 #include <mach/serial.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
-#include <mach/common.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index d9d40450bdc..56c8cd01de9 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -45,7 +45,6 @@
 #include <mach/nand.h>
 #include <mach/mmc.h>
 #include <mach/emac.h>
-#include <mach/common.h>
 
 #define DM644X_EVM_PHY_MASK		(0x2)
 #define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index e17de635262..8657e72debc 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -47,7 +47,6 @@
 #include <mach/i2c.h>
 #include <mach/mmc.h>
 #include <mach/emac.h>
-#include <mach/common.h>
 
 #define DM646X_EVM_PHY_MASK		(0x2)
 #define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 748a8e48541..7acdfd8ac07 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -52,7 +52,6 @@
 #include <mach/serial.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
-#include <mach/common.h>
 
 #define SFFSDR_PHY_MASK		(0x2)
 #define SFFSDR_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
index a2df5bb7dff..dbcac9c40a2 100644
--- a/arch/arm/mach-ep93xx/dma-m2p.c
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -33,6 +33,7 @@
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 34ddec081c4..411734422c1 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -41,9 +41,6 @@
 #define TS72XX_OPTIONS2_TS9420_BOOT	0x02
 
 
-#define TS72XX_NOR_PHYS_BASE		0x60000000
-#define TS72XX_NOR2_PHYS_BASE		0x62000000
-
 #define TS72XX_NAND1_DATA_PHYS_BASE	0x60000000
 #define TS72XX_NAND2_DATA_PHYS_BASE	0x70000000
 #define TS72XX_NAND_DATA_VIRT_BASE	0xfebfc000
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 7ee024d3482..aaf1371412a 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -112,13 +112,16 @@ static void __init ts72xx_map_io(void)
 	}
 }
 
+/*************************************************************************
+ * NOR flash (TS-7200 only)
+ *************************************************************************/
 static struct physmap_flash_data ts72xx_flash_data = {
-	.width		= 1,
+	.width		= 2,
 };
 
 static struct resource ts72xx_flash_resource = {
-	.start		= TS72XX_NOR_PHYS_BASE,
-	.end		= TS72XX_NOR_PHYS_BASE + SZ_16M - 1,
+	.start		= EP93XX_CS6_PHYS_BASE,
+	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -132,6 +135,12 @@ static struct platform_device ts72xx_flash = {
 	.resource	= &ts72xx_flash_resource,
 };
 
+static void __init ts72xx_register_flash(void)
+{
+	if (board_is_ts7200())
+		platform_device_register(&ts72xx_flash);
+}
+
 static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
 {
 	__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
@@ -165,8 +174,7 @@ static struct ep93xx_eth_data ts72xx_eth_data = {
 static void __init ts72xx_init_machine(void)
 {
 	ep93xx_init_devices();
-	if (board_is_ts7200())
-		platform_device_register(&ts72xx_flash);
+	ts72xx_register_flash();
 	platform_device_register(&ts72xx_rtc_device);
 
 	ep93xx_register_eth(&ts72xx_eth_data, 1);
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index ce63048d45e..8a947d42a6f 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -17,7 +17,7 @@
 
 #include <mach/hardware.h>
 
-#define IO_SPACE_LIMIT 0xffff0000
+#define IO_SPACE_LIMIT 0x0000ffff
 
 extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
 extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
index e021a80c2ca..bc74278ed31 100644
--- a/arch/arm/mach-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -289,7 +289,7 @@
 
 #define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TDM_DTX		MPP( 48. 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1    )
 
 #define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 01aa213c0a6..ec1a64f263d 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -206,6 +206,15 @@ static void __init qnap_ts219_init(void)
 
 }
 
+static int __init ts219_pci_init(void)
+{
+   if (machine_is_ts219())
+           kirkwood_pcie_init();
+
+   return 0;
+}
+subsys_initcall(ts219_pci_init);
+
 MACHINE_START(TS219, "QNAP TS-119/TS-219")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
 	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
index 1d640d075b7..e0f911d9e02 100644
--- a/arch/arm/mach-ks8695/include/mach/hardware.h
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -17,6 +17,11 @@
 #include <asm/sizes.h>
 
 /*
+ * Clocks are derived from MCLK, which is 25Mhz
+ */
+#define KS8695_CLOCK_RATE	25000000
+
+/*
  * Physical RAM address.
  */
 #define KS8695_SDRAM_PA		0x00000000
diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
index 4682e350369..10f716371bd 100644
--- a/arch/arm/mach-ks8695/include/mach/timex.h
+++ b/arch/arm/mach-ks8695/include/mach/timex.h
@@ -14,7 +14,8 @@
 #ifndef __ASM_ARCH_TIMEX_H
 #define __ASM_ARCH_TIMEX_H
 
-/* timers are derived from MCLK, which is 25MHz */
-#define CLOCK_TICK_RATE 25000000
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE 	KS8695_CLOCK_RATE
 
 #endif
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index f5ebcc0fcab..78499667eb7 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -245,6 +245,9 @@ static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs
 
 static void __init ks8695_pci_preinit(void)
 {
+	/* make software reset to avoid freeze if PCI bus was messed up */
+	__raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS);
+
 	/* stage 1 initialization, subid, subdevice = 0x0001 */
 	__raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
 
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 17a21a291e2..851f2458bf6 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -36,6 +36,14 @@ config MACH_PCM037
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
 
+config MACH_PCM037_EET
+	bool "Support pcm037 EET board extensions"
+	depends on MACH_PCM037
+	help
+	  Add support for PCM037 EET baseboard extensions. If you are using the
+	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+	  command-line parameter.
+
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 0322696bd11..6b9775471be 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index 541181090b3..ee331fd6b1b 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -31,6 +31,8 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -46,8 +48,10 @@
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
+#include "crm_regs.h"
 
 static int armadillo5x0_pins[] = {
 	/* UART1 */
@@ -93,7 +97,56 @@ static int armadillo5x0_pins[] = {
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_DRDY0__DRDY0,
 	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+};
 
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+	.width		= 1,
+	.hw_ecc		= 1,
+};
+
+/*
+ * MTD NOR Flash
+ */
+static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
+	{
+		.name		= "nor.bootloader",
+		.offset		= 0x00000000,
+		.size		= 4*32*1024,
+	}, {
+		.name		= "nor.kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16*128*1024,
+	}, {
+		.name		= "nor.userland",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 110*128*1024,
+	}, {
+		.name		= "nor.config",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1*128*1024,
+	},
+};
+
+static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+	.width		= 2,
+	.parts		= armadillo5x0_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
+};
+
+static struct resource armadillo5x0_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= CS0_BASE_ADDR,
+	.end		= CS0_BASE_ADDR + SZ_64M - 1,
+};
+
+static struct platform_device armadillo5x0_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= -1,
+	.num_resources		= 1,
+	.resource		= &armadillo5x0_nor_flash_resource,
 };
 
 /*
@@ -272,6 +325,16 @@ static void __init armadillo5x0_init(void)
 	/* Register FB */
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	/* Register NOR Flash */
+	mxc_register_device(&armadillo5x0_nor_flash,
+			    &armadillo5x0_nor_flash_pdata);
+
+	/* Register NAND Flash */
+	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+
+	/* set NAND page size to 2k if not configured via boot mode pins */
+	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
 }
 
 static void __init armadillo5x0_timer_init(void)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index d927eddcad4..9e87e08fb12 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 4704405165a..b48581e7ded 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -63,7 +63,7 @@ static struct imxuart_platform_data uart_pdata = {
 
 static int devboard_sdhc2_get_ro(struct device *dev)
 {
-	return gpio_get_value(SDHC2_WP);
+	return !gpio_get_value(SDHC2_WP);
 }
 
 static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 641c3d6153a..901fb0166c0 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -67,7 +67,7 @@ static unsigned int marxbot_pins[] = {
 
 static int marxbot_sdhc2_get_ro(struct device *dev)
 {
-	return gpio_get_value(SDHC2_WP);
+	return !gpio_get_value(SDHC2_WP);
 }
 
 static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index a17f2e41160..2a2da4739ec 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -94,7 +94,7 @@ static struct imxi2c_platform_data moboard_i2c1_pdata = {
 
 static int moboard_sdhc1_get_ro(struct device *dev)
 {
-	return gpio_get_value(SDHC1_WP);
+	return !gpio_get_value(SDHC1_WP);
 }
 
 static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index c6f61a1f06c..840cfda341d 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -18,7 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
-
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/plat-ram.h>
@@ -33,29 +33,67 @@
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
 
-#include <mach/hardware.h>
+#include <media/soc_camera.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/board-pcm037.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/board-pcm037.h>
+#include <mach/mmc.h>
+#include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
-#include <mach/mmc.h>
-#ifdef CONFIG_I2C_IMX
-#include <mach/i2c.h>
-#endif
 
 #include "devices.h"
+#include "pcm037.h"
+
+static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
+
+static int __init pcm037_variant_setup(char *str)
+{
+	if (!strcmp("eet", str))
+		pcm037_instance = PCM037_EET;
+	else if (strcmp("pcm970", str))
+		pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+
+	return 1;
+}
+
+/* Supported values: "pcm970" (default) and "eet" */
+__setup("pcm037_variant=", pcm037_variant_setup);
+
+enum pcm037_board_variant pcm037_variant(void)
+{
+	return pcm037_instance;
+}
+
+/* UART1 with RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_handshake_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
+
+/* UART1 without RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_pins[] = {
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
 
 static unsigned int pcm037_pins[] = {
 	/* I2C */
 	MX31_PIN_CSPI2_MOSI__SCL,
 	MX31_PIN_CSPI2_MISO__SDA,
+	MX31_PIN_CSPI2_SS2__I2C3_SDA,
+	MX31_PIN_CSPI2_SCLK__I2C3_SCL,
 	/* SDHC1 */
 	MX31_PIN_SD1_DATA3__SD1_DATA3,
 	MX31_PIN_SD1_DATA2__SD1_DATA2,
@@ -73,11 +111,6 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CSPI1_SS0__SS0,
 	MX31_PIN_CSPI1_SS1__SS1,
 	MX31_PIN_CSPI1_SS2__SS2,
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
 	/* UART2 */
 	MX31_PIN_TXD2__TXD2,
 	MX31_PIN_RXD2__RXD2,
@@ -120,6 +153,22 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_D3_SPL__D3_SPL,
 	MX31_PIN_D3_CLS__D3_CLS,
 	MX31_PIN_LCS0__GPI03_23,
+	/* CSI */
+	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
+	MX31_PIN_CSI_D6__CSI_D6,
+	MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8,
+	MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10,
+	MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12,
+	MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14,
+	MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+	MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 };
 
 static struct physmap_flash_data pcm037_flash_data = {
@@ -250,19 +299,43 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 	.hw_ecc = 1,
 };
 
-#ifdef CONFIG_I2C_IMX
 static struct imxi2c_platform_data pcm037_i2c_1_data = {
 	.bitrate = 100000,
 };
 
+static struct imxi2c_platform_data pcm037_i2c_2_data = {
+	.bitrate = 20000,
+};
+
 static struct at24_platform_data board_eeprom = {
 	.byte_len = 4096,
 	.page_size = 32,
 	.flags = AT24_FLAG_ADDR16,
 };
 
+static int pcm037_camera_power(struct device *dev, int on)
+{
+	/* disable or enable the camera in X7 or X8 PCM970 connector */
+	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
+	return 0;
+}
+
+static struct i2c_board_info pcm037_i2c_2_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= pcm037_camera_power,
+	.board_info	= &pcm037_i2c_2_devices[0],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9t031",
+};
+
 static struct i2c_board_info pcm037_i2c_devices[] = {
-       {
+	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
@@ -270,7 +343,14 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 		.type = "pcf8563",
 	}
 };
-#endif
+
+static struct platform_device pcm037_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink,
+	},
+};
 
 /* Not connected by default */
 #ifdef PCM970_SDHC_RW_SWITCH
@@ -334,9 +414,41 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc1_exit,
 };
 
+struct mx3_camera_pdata camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 2000,
+};
+
+static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+{
+	dma_addr_t dma_handle;
+	void *buf;
+	int dma;
+
+	if (buf_size < 2 * 1024 * 1024)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, buf_size);
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					dma_handle, dma_handle, buf_size,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	/* The way we call dma_declare_coherent_memory only a malloc can fail */
+	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
+	&pcm037_camera,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -377,6 +489,22 @@ static const struct fb_videomode fb_modedb[] = {
 		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
 		.vmode		= FB_VMODE_NONINTERLACED,
 		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "CMEL-OLED",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
 	},
 };
 
@@ -397,6 +525,14 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
 			"pcm037");
 
+	if (pcm037_variant() == PCM037_EET)
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
+			ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
+	else
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
+			ARRAY_SIZE(pcm037_uart1_handshake_pins),
+			"pcm037_uart1");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
@@ -415,18 +551,30 @@ static void __init mxc_board_init(void)
 	}
 
 
-#ifdef CONFIG_I2C_IMX
+	/* I2C adapters and devices */
 	i2c_register_board_info(1, pcm037_i2c_devices,
 			ARRAY_SIZE(pcm037_i2c_devices));
 
 	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-#endif
+	mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
 	if (!gpio_usbotg_hs_activate())
 		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
+	/* CSI */
+	/* Camera power: default - off */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+	if (!ret)
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+	else
+		iclink.power = NULL;
+
+	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
+		mxc_register_device(&mx3_camera, &camera_pdata);
 }
 
 static void __init pcm037_timer_init(void)
@@ -448,4 +596,3 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
 MACHINE_END
-
diff --git a/arch/arm/mach-mx3/pcm037.h b/arch/arm/mach-mx3/pcm037.h
new file mode 100644
index 00000000000..d6929721a5f
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm037.h
@@ -0,0 +1,11 @@
+#ifndef __PCM037_H__
+#define __PCM037_H__
+
+enum pcm037_board_variant {
+	PCM037_PCM970,
+	PCM037_EET,
+};
+
+extern enum pcm037_board_variant pcm037_variant(void);
+
+#endif
diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/pcm037_eet.c
new file mode 100644
index 00000000000..8d386000fc4
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm037_eet.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/common.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/iomux-mx3.h>
+
+#include <asm/mach-types.h>
+
+#include "pcm037.h"
+#include "devices.h"
+
+static unsigned int pcm037_eet_pins[] = {
+	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
+	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
+	/* GPIO keys */
+	IOMUX_MODE(MX31_PIN_GPIO1_0,	IOMUX_CONFIG_GPIO), /* 0 */
+	IOMUX_MODE(MX31_PIN_GPIO1_1,	IOMUX_CONFIG_GPIO), /* 1 */
+	IOMUX_MODE(MX31_PIN_GPIO1_2,	IOMUX_CONFIG_GPIO), /* 2 */
+	IOMUX_MODE(MX31_PIN_GPIO1_3,	IOMUX_CONFIG_GPIO), /* 3 */
+	IOMUX_MODE(MX31_PIN_SVEN0,	IOMUX_CONFIG_GPIO), /* 32 */
+	IOMUX_MODE(MX31_PIN_STX0,	IOMUX_CONFIG_GPIO), /* 33 */
+	IOMUX_MODE(MX31_PIN_SRX0,	IOMUX_CONFIG_GPIO), /* 34 */
+	IOMUX_MODE(MX31_PIN_SIMPD0,	IOMUX_CONFIG_GPIO), /* 35 */
+	IOMUX_MODE(MX31_PIN_RTS1,	IOMUX_CONFIG_GPIO), /* 38 */
+	IOMUX_MODE(MX31_PIN_CTS1,	IOMUX_CONFIG_GPIO), /* 39 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW4,	IOMUX_CONFIG_GPIO), /* 50 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW5,	IOMUX_CONFIG_GPIO), /* 51 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW6,	IOMUX_CONFIG_GPIO), /* 52 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW7,	IOMUX_CONFIG_GPIO), /* 53 */
+
+	/* LEDs */
+	IOMUX_MODE(MX31_PIN_DTR_DTE1,	IOMUX_CONFIG_GPIO), /* 44 */
+	IOMUX_MODE(MX31_PIN_DSR_DTE1,	IOMUX_CONFIG_GPIO), /* 45 */
+	IOMUX_MODE(MX31_PIN_KEY_COL5,	IOMUX_CONFIG_GPIO), /* 55 */
+	IOMUX_MODE(MX31_PIN_KEY_COL6,	IOMUX_CONFIG_GPIO), /* 56 */
+};
+
+/* SPI */
+static struct spi_board_info pcm037_spi_dev[] = {
+	{
+		.modalias	= "dac124s085",
+		.max_speed_hz	= 400000,
+		.bus_num	= 0,
+		.chip_select	= 0,		/* Index in pcm037_spi1_cs[] */
+		.mode		= SPI_CPHA,
+	},
+};
+
+/* Platform Data for MXC CSPI */
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+
+struct spi_imx_master pcm037_spi1_master = {
+	.chipselect = pcm037_spi1_cs,
+	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
+};
+#endif
+
+/* GPIO-keys input device */
+static struct gpio_keys_button pcm037_gpio_keys[] = {
+	{
+		.type	= EV_KEY,
+		.code	= KEY_L,
+		.gpio	= 0,
+		.desc	= "Wheel Manual",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_A,
+		.gpio	= 1,
+		.desc	= "Wheel AF",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_V,
+		.gpio	= 2,
+		.desc	= "Wheel View",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_M,
+		.gpio	= 3,
+		.desc	= "Wheel Menu",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_UP,
+		.gpio	= 32,
+		.desc	= "Nav Pad Up",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_RIGHT,
+		.gpio	= 33,
+		.desc	= "Nav Pad Right",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_DOWN,
+		.gpio	= 34,
+		.desc	= "Nav Pad Down",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_LEFT,
+		.gpio	= 35,
+		.desc	= "Nav Pad Left",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_ENTER,
+		.gpio	= 38,
+		.desc	= "Nav Pad Ok",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_O,
+		.gpio	= 39,
+		.desc	= "Wheel Off",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_FORWARD,
+		.gpio	= 50,
+		.desc	= "Focus Forward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_BACK,
+		.gpio	= 51,
+		.desc	= "Focus Backward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_MIDDLE,
+		.gpio	= 52,
+		.desc	= "Release Half",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_EXTRA,
+		.gpio	= 53,
+		.desc	= "Release Full",
+		.wakeup	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+	.buttons	= pcm037_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(pcm037_gpio_keys),
+	.rep		= 0, /* No auto-repeat */
+};
+
+static struct platform_device pcm037_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pcm037_gpio_keys_platform_data,
+	},
+};
+
+static int eet_init_devices(void)
+{
+	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+		return 0;
+
+	mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
+				ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
+
+	/* SPI */
+	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+#endif
+
+	platform_device_register(&pcm037_gpio_keys_device);
+
+	return 0;
+}
+
+late_initcall(eet_init_devices);
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index e70fc7c66bb..ed2a48a9ce7 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -36,7 +36,6 @@
 #include <mach/hwa742.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
-#include <mach/usb.h>
 #include <mach/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
@@ -205,9 +204,11 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
 static struct omap_mmc_platform_data nokia770_mmc2_data = {
 	.nr_slots                       = 1,
 	.dma_mask			= 0xffffffff,
+	.max_freq                       = 12000000,
 	.slots[0]       = {
 		.set_power		= nokia770_mmc_set_power,
 		.get_cover_state	= nokia770_mmc_get_cover_state,
+		.ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 0af4d6c85b4..6810b4aeb02 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -203,5 +203,5 @@ module_exit(omap1_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
 MODULE_ALIAS("platform:omap1-mailbox");
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index a2d7814896b..505d98cfe50 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 9c3fdcdf76c..8ec2a132904 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -141,7 +141,7 @@ static inline void board_smc91x_init(void)
 
 static void __init omap_2430sdp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 496a90e4ea7..ac262cd7450 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -169,7 +169,7 @@ static struct platform_device *sdp3430_devices[] __initdata = {
 
 static void __init omap_3430sdp_init_irq(void)
 {
-	omap2_init_common_hw(hyb18m512160af6_sdrc_params);
+	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 57e477bd89c..b0c7402248f 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -59,7 +59,7 @@ static void __init gic_init_irq(void)
 
 static void __init omap_4430sdp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(1);
 #endif
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 06dfba888b0..dcfc20d0389 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -250,7 +250,7 @@ out:
 
 static void __init omap_apollon_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	apollon_init_smc91x();
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 3492162a65c..fd00aa03690 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -33,7 +33,7 @@
 
 static void __init omap_generic_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 }
 
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index e7d017cdc43..7b1d61d5bb2 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -270,7 +270,7 @@ static void __init h4_init_flash(void)
 
 static void __init omap_h4_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	h4_init_flash();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d8bc0a7dcb8..ea383f88cb1 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -270,7 +270,7 @@ static inline void __init ldp_init_smsc911x(void)
 
 static void __init omap_ldp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	ldp_init_smsc911x();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 991ac9c3803..e00ba128cec 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -282,7 +282,8 @@ static int __init omap3_beagle_i2c_init(void)
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -408,6 +409,10 @@ static void __init omap3_beagle_init(void)
 
 	usb_musb_init();
 	omap3beagle_flash_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_cfg_reg(H16_34XX_SDRC_CKE0);
+	omap_cfg_reg(H17_34XX_SDRC_CKE1);
 }
 
 static void __init omap3_beagle_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index d3cc145814d..c4b144647dc 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -25,6 +25,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/usb/otg.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -279,7 +280,7 @@ struct spi_board_info omap3evm_spi_board_info[] = {
 
 static void __init omap3_evm_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	omap3evm_init_smc911x();
@@ -307,6 +308,10 @@ static void __init omap3_evm_init(void)
 				ARRAY_SIZE(omap3evm_spi_board_info));
 
 	omap_serial_init();
+#ifdef CONFIG_NOP_USB_XCEIV
+	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
+	usb_nop_xceiv_register();
+#endif
 	usb_musb_init();
 	ads7846_dev_init();
 }
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index e32aa23ce96..864ee3d021f 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -40,6 +40,7 @@
 #include <mach/mcspi.h>
 #include <mach/usb.h>
 #include <mach/keypad.h>
+#include <mach/mux.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
@@ -310,7 +311,8 @@ static int __init omap3pandora_i2c_init(void)
 
 static void __init omap3pandora_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -397,6 +399,10 @@ static void __init omap3pandora_init(void)
 	omap3pandora_ads7846_init();
 	pandora_keys_gpio_init();
 	usb_musb_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_cfg_reg(H16_34XX_SDRC_CKE0);
+	omap_cfg_reg(H17_34XX_SDRC_CKE1);
 }
 
 static void __init omap3pandora_map_io(void)
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index dff5528fbfb..6bce23004aa 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -44,6 +44,7 @@
 #include <mach/gpmc.h>
 #include <mach/hardware.h>
 #include <mach/nand.h>
+#include <mach/mux.h>
 #include <mach/usb.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -51,6 +52,7 @@
 
 #define OVERO_GPIO_BT_XGATE	15
 #define OVERO_GPIO_W2W_NRESET	16
+#define OVERO_GPIO_PENDOWN	114
 #define OVERO_GPIO_BT_NRESET	164
 #define OVERO_GPIO_USBH_CPEN	168
 #define OVERO_GPIO_USBH_NRESET	183
@@ -146,7 +148,7 @@ static struct platform_device overo_smsc911x_device = {
 	.name		= "smsc911x",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(overo_smsc911x_resources),
-	.resource	= &overo_smsc911x_resources,
+	.resource	= overo_smsc911x_resources,
 	.dev		= {
 		.platform_data = &overo_smsc911x_config,
 	},
@@ -360,7 +362,8 @@ static int __init overo_i2c_init(void)
 
 static void __init overo_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -395,6 +398,10 @@ static void __init overo_init(void)
 	overo_ads7846_init();
 	overo_init_smsc911x();
 
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_cfg_reg(H16_34XX_SDRC_CKE0);
+	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+
 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
 			  "OVERO_GPIO_W2W_NRESET") == 0) &&
 	    (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) {
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index da93b86234e..56d931a425f 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -278,6 +278,10 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
 	.setup			= rx51_twlgpio_setup,
 };
 
+static struct twl4030_usb_data rx51_usb_data = {
+	.usb_mode		= T2_USB_MODE_ULPI,
+};
+
 static struct twl4030_platform_data rx51_twldata = {
 	.irq_base		= TWL4030_IRQ_BASE,
 	.irq_end		= TWL4030_IRQ_END,
@@ -286,6 +290,7 @@ static struct twl4030_platform_data rx51_twldata = {
 	.gpio			= &rx51_gpio_data,
 	.keypad			= &rx51_kp_data,
 	.madc			= &rx51_madc_data,
+	.usb			= &rx51_usb_data,
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,
@@ -362,6 +367,7 @@ static struct omap_onenand_platform_data board_onenand_data = {
 	.gpio_irq	= 65,
 	.parts		= onenand_partitions,
 	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+	.flags		= ONENAND_SYNC_READWRITE,
 };
 
 static void __init board_onenand_init(void)
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 374ff63c3eb..1c9e07fe826 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -61,7 +61,7 @@ static struct omap_board_config_kernel rx51_config[] = {
 
 static void __init rx51_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -75,6 +75,10 @@ static void __init rx51_init(void)
 	omap_serial_init();
 	usb_musb_init();
 	rx51_peripherals_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_cfg_reg(H16_34XX_SDRC_CKE0);
+	omap_cfg_reg(H17_34XX_SDRC_CKE1);
 }
 
 static void __init rx51_map_io(void)
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index bcc0f7632de..427b7b8b123 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -25,7 +25,7 @@
 
 static void __init omap_zoom2_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index b0665f161c0..456e2ad5f62 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -27,6 +27,7 @@
 #include <mach/clock.h>
 #include <mach/clockdomain.h>
 #include <mach/cpu.h>
+#include <mach/prcm.h>
 #include <asm/div64.h>
 
 #include <mach/sdrc.h>
@@ -38,8 +39,6 @@
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
 
-#define MAX_CLOCK_ENABLE_WAIT		100000
-
 /* DPLL rate rounding: minimum DPLL multiplier, divider values */
 #define DPLL_MIN_MULTIPLIER		1
 #define DPLL_MIN_DIVIDER		1
@@ -274,83 +273,97 @@ unsigned long omap2_fixed_divisor_recalc(struct clk *clk)
 }
 
 /**
- * omap2_wait_clock_ready - wait for clock to enable
- * @reg: physical address of clock IDLEST register
- * @mask: value to mask against to determine if the clock is active
- * @name: name of the clock (for printk)
+ * omap2_clk_dflt_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Note: We don't need special code here for INVERT_ENABLE for the
+ * time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
  *
- * Returns 1 if the clock enabled in time, or 0 if it failed to enable
- * in roughly MAX_CLOCK_ENABLE_WAIT microseconds.
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes it's
+ * just a matter of XORing the bits.
+ *
+ * Some clocks don't have companion clocks.  For example, modules with
+ * only an interface clock (such as MAILBOXES) don't have a companion
+ * clock.  Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active.  Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts.  No return value.
  */
-int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
+void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
+				   u8 *other_bit)
 {
-	int i = 0;
-	int ena = 0;
+	u32 r;
 
 	/*
-	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
-	 * 34xx reverses this, just to keep us on our toes
+	 * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes
+	 * it's just a matter of XORing the bits.
 	 */
-	if (cpu_mask & (RATE_IN_242X | RATE_IN_243X))
-		ena = mask;
-	else if (cpu_mask & RATE_IN_343X)
-		ena = 0;
-
-	/* Wait for lock */
-	while (((__raw_readl(reg) & mask) != ena) &&
-	       (i++ < MAX_CLOCK_ENABLE_WAIT)) {
-		udelay(1);
-	}
-
-	if (i <= MAX_CLOCK_ENABLE_WAIT)
-		pr_debug("Clock %s stable after %d loops\n", name, i);
-	else
-		printk(KERN_ERR "Clock %s didn't enable in %d tries\n",
-		       name, MAX_CLOCK_ENABLE_WAIT);
-
-
-	return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0;
-};
+	r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
 
+	*other_reg = (__force void __iomem *)r;
+	*other_bit = clk->enable_bit;
+}
 
-/*
- * Note: We don't need special code here for INVERT_ENABLE
- * for the time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
+/**
+ * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
+ * @clk: struct clk * to find IDLEST info for
+ * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
+ * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in
+ *
+ * Return the CM_IDLEST register address and bit shift corresponding
+ * to the module that "owns" this clock.  This default code assumes
+ * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
+ * the IDLEST register address ID corresponds to the CM_*CLKEN
+ * register address ID (e.g., that CM_FCLKEN2 corresponds to
+ * CM_IDLEST2).  This is not true for all modules.  No return value.
  */
-static void omap2_clk_wait_ready(struct clk *clk)
+void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
+				u8 *idlest_bit)
 {
-	void __iomem *reg, *other_reg, *st_reg;
-	u32 bit;
+	u32 r;
 
-	/*
-	 * REVISIT: This code is pretty ugly.  It would be nice to generalize
-	 * it and pull it into struct clk itself somehow.
-	 */
-	reg = clk->enable_reg;
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = clk->enable_bit;
+}
 
-	/*
-	 * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes
-	 * it's just a matter of XORing the bits.
-	 */
-	other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+/**
+ * omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
+ *
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE).  This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code.  No return value.
+ */
+static void omap2_module_wait_ready(struct clk *clk)
+{
+	void __iomem *companion_reg, *idlest_reg;
+	u8 other_bit, idlest_bit;
+
+	/* Not all modules have multiple clocks that their IDLEST depends on */
+	if (clk->ops->find_companion) {
+		clk->ops->find_companion(clk, &companion_reg, &other_bit);
+		if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+			return;
+	}
 
-	/* Check if both functional and interface clocks
-	 * are running. */
-	bit = 1 << clk->enable_bit;
-	if (!(__raw_readl(other_reg) & bit))
-		return;
-	st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */
+	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit);
 
-	omap2_wait_clock_ready(st_reg, bit, clk->name);
+	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name);
 }
 
-static int omap2_dflt_clk_enable(struct clk *clk)
+int omap2_dflt_clk_enable(struct clk *clk)
 {
 	u32 v;
 
 	if (unlikely(clk->enable_reg == NULL)) {
-		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+		pr_err("clock.c: Enable for %s without enable code\n",
 		       clk->name);
 		return 0; /* REVISIT: -EINVAL */
 	}
@@ -363,26 +376,13 @@ static int omap2_dflt_clk_enable(struct clk *clk)
 	__raw_writel(v, clk->enable_reg);
 	v = __raw_readl(clk->enable_reg); /* OCP barrier */
 
-	return 0;
-}
+	if (clk->ops->find_idlest)
+		omap2_module_wait_ready(clk);
 
-static int omap2_dflt_clk_enable_wait(struct clk *clk)
-{
-	int ret;
-
-	if (!clk->enable_reg) {
-		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
-		       clk->name);
-		return 0; /* REVISIT: -EINVAL */
-	}
-
-	ret = omap2_dflt_clk_enable(clk);
-	if (ret == 0)
-		omap2_clk_wait_ready(clk);
-	return ret;
+	return 0;
 }
 
-static void omap2_dflt_clk_disable(struct clk *clk)
+void omap2_dflt_clk_disable(struct clk *clk)
 {
 	u32 v;
 
@@ -406,8 +406,10 @@ static void omap2_dflt_clk_disable(struct clk *clk)
 }
 
 const struct clkops clkops_omap2_dflt_wait = {
-	.enable		= omap2_dflt_clk_enable_wait,
+	.enable		= omap2_dflt_clk_enable,
 	.disable	= omap2_dflt_clk_disable,
+	.find_companion	= omap2_clk_dflt_find_companion,
+	.find_idlest	= omap2_clk_dflt_find_idlest,
 };
 
 const struct clkops clkops_omap2_dflt = {
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 2679ddfa642..9ae7540f8af 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -65,6 +65,12 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
 u32 omap2_get_dpll_rate(struct clk *clk);
 int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
 void omap2_clk_prepare_for_reboot(void);
+int omap2_dflt_clk_enable(struct clk *clk);
+void omap2_dflt_clk_disable(struct clk *clk);
+void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
+				   u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
+				u8 *idlest_bit);
 
 extern const struct clkops clkops_omap2_dflt_wait;
 extern const struct clkops clkops_omap2_dflt;
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 44de0271fc2..bc5d3ac6661 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -30,6 +30,7 @@
 
 #include <mach/clock.h>
 #include <mach/sram.h>
+#include <mach/prcm.h>
 #include <asm/div64.h>
 #include <asm/clkdev.h>
 
@@ -43,6 +44,18 @@
 static const struct clkops clkops_oscck;
 static const struct clkops clkops_fixed;
 
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+					   void __iomem **idlest_reg,
+					   u8 *idlest_bit);
+
+/* 2430 I2CHS has non-standard IDLEST register */
+static const struct clkops clkops_omap2430_i2chs_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap2430_clk_i2chs_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
 #include "clock24xx.h"
 
 struct omap_clk {
@@ -240,6 +253,26 @@ static void __iomem *prcm_clksrc_ctrl;
  *-------------------------------------------------------------------------*/
 
 /**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules.  No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+					   void __iomem **idlest_reg,
+					   u8 *idlest_bit)
+{
+	*idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
+	*idlest_bit = clk->enable_bit;
+}
+
+
+/**
  * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
  * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
  *
@@ -325,8 +358,8 @@ static int omap2_clk_fixed_enable(struct clk *clk)
 	else if (clk == &apll54_ck)
 		cval = OMAP24XX_ST_54M_APLL;
 
-	omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
-			    clk->name);
+	omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
+			     clk->name);
 
 	/*
 	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 458f00cdcbe..d19cf7a7d8d 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -2337,7 +2337,7 @@ static struct clk i2c2_fck = {
 
 static struct clk i2chs2_fck = {
 	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2430_i2chs_wait,
 	.id		= 2,
 	.parent		= &func_96m_ck,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2370,7 +2370,7 @@ static struct clk i2c1_fck = {
 
 static struct clk i2chs1_fck = {
 	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2430_i2chs_wait,
 	.id		= 1,
 	.parent		= &func_96m_ck,
 	.clkdm_name	= "core_l4_clkdm",
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 045da923e75..cd7819cc0c9 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -2,7 +2,7 @@
  * OMAP3-specific clock framework functions
  *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
  * Testing and integration fixes by Jouni Högander
@@ -41,6 +41,37 @@
 
 static const struct clkops clkops_noncore_dpll_ops;
 
+static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
+					    void __iomem **idlest_reg,
+					    u8 *idlest_bit);
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
+					    void __iomem **idlest_reg,
+					    u8 *idlest_bit);
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
+						    void __iomem **idlest_reg,
+						    u8 *idlest_bit);
+
+static const struct clkops clkops_omap3430es2_ssi_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
+static const struct clkops clkops_omap3430es2_hsotgusb_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
+static const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
 #include "clock34xx.h"
 
 struct omap_clk {
@@ -157,10 +188,13 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
 	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_343X),
 	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_343X),
-	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck,	CK_343X),
-	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck,	CK_343X),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es2,	CK_3430ES2),
 	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
-	CLK("musb_hdrc",	"ick",	&hsotgusb_ick,	CK_343X),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2),
 	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
 	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
@@ -193,18 +227,21 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_343X),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_343X),
 	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_343X),
-	CLK(NULL,	"ssi_ick",	&ssi_ick,	CK_343X),
+	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es2,	CK_3430ES2),
 	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
 	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_343X),
 	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_343X),
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
 	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
 	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
-	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck, CK_343X),
+	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck_3430es1, CK_3430ES1),
+	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2),
 	CLK("omapfb",	"tv_fck",	&dss_tv_fck,	CK_343X),
 	CLK("omapfb",	"video_fck",	&dss_96m_fck,	CK_343X),
 	CLK("omapfb",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
-	CLK("omapfb",	"ick",		&dss_ick,	CK_343X),
+	CLK("omapfb",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
+	CLK("omapfb",	"ick",		&dss_ick_3430es2,	CK_3430ES2),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
@@ -301,6 +338,73 @@ static struct omap_clk omap34xx_clks[] = {
 #define SDRC_MPURATE_LOOPS		96
 
 /**
+ * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
+ * from the CM_{I,F}CLKEN bit.  Pass back the correct info via
+ * @idlest_reg and @idlest_bit.  No return value.
+ */
+static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
+					    void __iomem **idlest_reg,
+					    u8 *idlest_bit)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+}
+
+/**
+ * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
+ * target IDLEST bits.  For our purposes, we are concerned with the
+ * target IDLEST bits, which exist at a different bit position than
+ * the *CLKEN bit position for these modules (DSS and USBHOST) (The
+ * default find_idlest code assumes that they are at the same
+ * position.)  No return value.
+ */
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
+						    void __iomem **idlest_reg,
+						    u8 *idlest_bit)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	/* USBHOST_IDLE has same shift */
+	*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+}
+
+/**
+ * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
+ * shift from the CM_{I,F}CLKEN bit.  Pass back the correct info via
+ * @idlest_reg and @idlest_bit.  No return value.
+ */
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
+						 void __iomem **idlest_reg,
+						 u8 *idlest_bit)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+}
+
+/**
  * omap3_dpll_recalc - recalculate DPLL rate
  * @clk: DPLL struct clk
  *
@@ -725,7 +829,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	u32 unlock_dll = 0;
 	u32 c;
 	unsigned long validrate, sdrcrate, mpurate;
-	struct omap_sdrc_params *sp;
+	struct omap_sdrc_params *sdrc_cs0;
+	struct omap_sdrc_params *sdrc_cs1;
+	int ret;
 
 	if (!clk || !rate)
 		return -EINVAL;
@@ -743,8 +849,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	else
 		sdrcrate >>= ((clk->rate / rate) >> 1);
 
-	sp = omap2_sdrc_get_params(sdrcrate);
-	if (!sp)
+	ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
+	if (ret)
 		return -EINVAL;
 
 	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
@@ -765,12 +871,29 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 
 	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
 		 validrate);
-	pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
-		 sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
-
-	omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
-				  sp->actim_ctrlb, new_div, unlock_dll, c,
-				  sp->mr, rate > clk->rate);
+	pr_debug("clock: SDRC CS0 timing params used:"
+		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+		 sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+		 sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
+	if (sdrc_cs1)
+		pr_debug("clock: SDRC CS1 timing params used: "
+		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+		 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+		 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+
+	if (sdrc_cs1)
+		omap3_configure_core_dpll(
+				  new_div, unlock_dll, c, rate > clk->rate,
+				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+				  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+				  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+	else
+		omap3_configure_core_dpll(
+				  new_div, unlock_dll, c, rate > clk->rate,
+				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+				  0, 0, 0, 0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index e433aec4efd..57cc2725b92 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1568,7 +1568,7 @@ static const struct clksel ssi_ssr_clksel[] = {
 	{ .parent = NULL }
 };
 
-static struct clk ssi_ssr_fck = {
+static struct clk ssi_ssr_fck_3430es1 = {
 	.name		= "ssi_ssr_fck",
 	.ops		= &clkops_omap2_dflt,
 	.init		= &omap2_init_clksel_parent,
@@ -1581,10 +1581,31 @@ static struct clk ssi_ssr_fck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-static struct clk ssi_sst_fck = {
+static struct clk ssi_ssr_fck_3430es2 = {
+	.name		= "ssi_ssr_fck",
+	.ops		= &clkops_omap3430es2_ssi_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es1 = {
 	.name		= "ssi_sst_fck",
 	.ops		= &clkops_null,
-	.parent		= &ssi_ssr_fck,
+	.parent		= &ssi_ssr_fck_3430es1,
+	.fixed_div	= 2,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es2 = {
+	.name		= "ssi_sst_fck",
+	.ops		= &clkops_null,
+	.parent		= &ssi_ssr_fck_3430es2,
 	.fixed_div	= 2,
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
@@ -1606,9 +1627,19 @@ static struct clk core_l3_ick = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk hsotgusb_ick = {
+static struct clk hsotgusb_ick_3430es1 = {
 	.name		= "hsotgusb_ick",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_3430es2 = {
+	.name		= "hsotgusb_ick",
+	.ops		= &clkops_omap3430es2_hsotgusb_wait,
 	.parent		= &core_l3_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
@@ -1947,7 +1978,7 @@ static struct clk ssi_l4_ick = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk ssi_ick = {
+static struct clk ssi_ick_3430es1 = {
 	.name		= "ssi_ick",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &ssi_l4_ick,
@@ -1957,6 +1988,16 @@ static struct clk ssi_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk ssi_ick_3430es2 = {
+	.name		= "ssi_ick",
+	.ops		= &clkops_omap3430es2_ssi_wait,
+	.parent		= &ssi_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 /* REVISIT: Technically the TRM claims that this is CORE_CLK based,
  * but l4_ick makes more sense to me */
 
@@ -2024,7 +2065,7 @@ static struct clk des1_ick = {
 };
 
 /* DSS */
-static struct clk dss1_alwon_fck = {
+static struct clk dss1_alwon_fck_3430es1 = {
 	.name		= "dss1_alwon_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll4_m4x2_ck,
@@ -2034,6 +2075,16 @@ static struct clk dss1_alwon_fck = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk dss1_alwon_fck_3430es2 = {
+	.name		= "dss1_alwon_fck",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &dpll4_m4x2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk dss_tv_fck = {
 	.name		= "dss_tv_fck",
 	.ops		= &clkops_omap2_dflt,
@@ -2067,7 +2118,7 @@ static struct clk dss2_alwon_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk dss_ick = {
+static struct clk dss_ick_3430es1 = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "dss_ick",
 	.ops		= &clkops_omap2_dflt,
@@ -2079,6 +2130,18 @@ static struct clk dss_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk dss_ick_3430es2 = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "dss_ick",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clk_clkdm,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 /* CAM */
 
 static struct clk cam_mclk = {
@@ -2118,7 +2181,7 @@ static struct clk csi2_96m_fck = {
 
 static struct clk usbhost_120m_fck = {
 	.name		= "usbhost_120m_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll5_m2_ck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
@@ -2129,7 +2192,7 @@ static struct clk usbhost_120m_fck = {
 
 static struct clk usbhost_48m_fck = {
 	.name		= "usbhost_48m_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &omap_48m_fck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
@@ -2141,7 +2204,7 @@ static struct clk usbhost_48m_fck = {
 static struct clk usbhost_ick = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "usbhost_ick",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 1d3c93bf86d..f3c91a1ca39 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -29,9 +29,9 @@
  * These registers appear once per CM module.
  */
 
-#define OMAP3430_CM_REVISION		OMAP_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG		OMAP_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL		OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3430_CM_REVISION		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL		OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
 
 #define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
 #define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 2fd22f9c5f0..54fec53a48e 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -31,6 +31,8 @@ static struct platform_device gpmc_onenand_device = {
 static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 {
 	struct gpmc_timings t;
+	u32 reg;
+	int err;
 
 	const int t_cer = 15;
 	const int t_avdp = 12;
@@ -43,6 +45,11 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 	const int t_wpl = 40;
 	const int t_wph = 30;
 
+	/* Ensure sync read and sync write are disabled */
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
 	memset(&t, 0, sizeof(t));
 	t.sync_clk = 0;
 	t.cs_on = 0;
@@ -74,7 +81,16 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 			  GPMC_CONFIG1_DEVICESIZE_16 |
 			  GPMC_CONFIG1_MUXADDDATA);
 
-	return gpmc_cs_set_timings(cs, &t);
+	err = gpmc_cs_set_timings(cs, &t);
+	if (err)
+		return err;
+
+	/* Ensure sync read and sync write are disabled */
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
+	return 0;
 }
 
 static void set_onenand_cfg(void __iomem *onenand_base, int latency,
@@ -124,7 +140,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
 		sync_read = 1;
 		sync_write = 1;
-	}
+	} else
+		return omap2_onenand_set_async_mode(cs, onenand_base);
 
 	if (!freq) {
 		/* Very first call freq is not known */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 458990e20c6..a98201cc265 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -48,6 +48,28 @@ int omap_chip_is(struct omap_chip_id oci)
 }
 EXPORT_SYMBOL(omap_chip_is);
 
+int omap_type(void)
+{
+	u32 val = 0;
+
+	if (cpu_is_omap24xx())
+		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+	else if (cpu_is_omap34xx())
+		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+	else {
+		pr_err("Cannot detect omap type!\n");
+		goto out;
+	}
+
+	val &= OMAP2_DEVICETYPE_MASK;
+	val >>= 8;
+
+out:
+	return val;
+}
+EXPORT_SYMBOL(omap_type);
+
+
 /*----------------------------------------------------------------------------*/
 
 #define OMAP_TAP_IDCODE		0x0204
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3a86b0f6603..e9b9bcb19b4 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -276,14 +276,15 @@ static int __init _omap2_init_reprogram_sdrc(void)
 	return v;
 }
 
-void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
+void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
+				 struct omap_sdrc_params *sdrc_cs1)
 {
 	omap2_mux_init();
 #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
-	omap2_sdrc_init(sp);
+	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 	_omap2_init_reprogram_sdrc();
 #endif
 	gpmc_init();
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index fd5b8a5925c..6f71f3730c9 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -282,12 +282,12 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* DSP or IVA2 IRQ */
-	mbox_dsp_info.irq = platform_get_irq(pdev, 0);
-	if (mbox_dsp_info.irq < 0) {
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
-		ret = -ENODEV;
 		goto err_dsp;
 	}
+	mbox_dsp_info.irq = ret;
 
 	ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
 	if (ret)
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f0435cd..99b6e154631 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 9756a878fd9..3c04c2f1b23 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -119,6 +119,7 @@ static int twl_mmc_late_init(struct device *dev)
 				if (i != 0)
 					break;
 				ret = PTR_ERR(reg);
+				hsmmc[i].vcc = NULL;
 				goto err;
 			}
 			hsmmc[i].vcc = reg;
@@ -165,8 +166,13 @@ done:
 static void twl_mmc_cleanup(struct device *dev)
 {
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	int i;
 
 	gpio_free(mmc->slots[0].switch_pin);
+	for(i = 0; i < ARRAY_SIZE(hsmmc); i++) {
+		regulator_put(hsmmc[i].vcc);
+		regulator_put(hsmmc[i].vcc_aux);
+	}
 }
 
 #ifdef CONFIG_PM
@@ -263,8 +269,19 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
 {
 	int ret = 0;
-	struct twl_mmc_controller *c = &hsmmc[1];
+	struct twl_mmc_controller *c = NULL;
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
+		if (mmc == hsmmc[i].mmc) {
+			c = &hsmmc[i];
+			break;
+		}
+	}
+
+	if (c == NULL)
+		return -ENODEV;
 
 	/* If we don't see a Vcc regulator, assume it's a fixed
 	 * voltage always-on regulator.
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 026c4fc883a..43d6b92b65f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -486,6 +486,12 @@ MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+
+/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
+MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
 };
 
 #define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index f7b3baf7667..21201cd4117 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -11,9 +11,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
-extern int omap2_pm_init(void);
-extern int omap3_pm_init(void);
-
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index db1025562fb..528dbdc26e2 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -470,7 +470,7 @@ static void __init prcm_setup_regs(void)
 			  WKUP_MOD, PM_WKEN);
 }
 
-int __init omap2_pm_init(void)
+static int __init omap2_pm_init(void)
 {
 	u32 l;
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 841d4c5ed8b..488d595d8e4 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -39,7 +39,9 @@
 struct power_state {
 	struct powerdomain *pwrdm;
 	u32 next_state;
+#ifdef CONFIG_SUSPEND
 	u32 saved_state;
+#endif
 	struct list_head node;
 };
 
@@ -293,6 +295,9 @@ out:
 	local_irq_enable();
 }
 
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state;
+
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
@@ -321,7 +326,6 @@ static int omap3_pm_suspend(void)
 restore:
 	/* Restore next_pwrsts */
 	list_for_each_entry(pwrst, &pwrst_list, node) {
-		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
 		if (state > pwrst->next_state) {
 			printk(KERN_INFO "Powerdomain (%s) didn't enter "
@@ -329,6 +333,7 @@ restore:
 			       pwrst->pwrdm->name, pwrst->next_state);
 			ret = -1;
 		}
+		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 	}
 	if (ret)
 		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
@@ -339,11 +344,11 @@ restore:
 	return ret;
 }
 
-static int omap3_pm_enter(suspend_state_t state)
+static int omap3_pm_enter(suspend_state_t unused)
 {
 	int ret = 0;
 
-	switch (state) {
+	switch (suspend_state) {
 	case PM_SUSPEND_STANDBY:
 	case PM_SUSPEND_MEM:
 		ret = omap3_pm_suspend();
@@ -360,12 +365,30 @@ static void omap3_pm_finish(void)
 	enable_hlt();
 }
 
+/* Hooks to enable / disable UART interrupts during suspend */
+static int omap3_pm_begin(suspend_state_t state)
+{
+	suspend_state = state;
+	omap_uart_enable_irqs(0);
+	return 0;
+}
+
+static void omap3_pm_end(void)
+{
+	suspend_state = PM_SUSPEND_ON;
+	omap_uart_enable_irqs(1);
+	return;
+}
+
 static struct platform_suspend_ops omap_pm_ops = {
+	.begin		= omap3_pm_begin,
+	.end		= omap3_pm_end,
 	.prepare	= omap3_pm_prepare,
 	.enter		= omap3_pm_enter,
 	.finish		= omap3_pm_finish,
 	.valid		= suspend_valid_only_mem,
 };
+#endif /* CONFIG_SUSPEND */
 
 
 /**
@@ -613,6 +636,24 @@ static void __init prcm_setup_regs(void)
 	/* Clear any pending PRCM interrupts */
 	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
+	/* Don't attach IVA interrupts */
+	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+	/* Clear any pending 'reset' flags */
+	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+	/* Clear any pending PRCM interrupts */
+	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
 	omap3_iva_idle();
 	omap3_d2d_idle();
 }
@@ -652,7 +693,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm)
 	return 0;
 }
 
-int __init omap3_pm_init(void)
+static int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
 	int ret;
@@ -692,7 +733,9 @@ int __init omap3_pm_init(void)
 	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
 					 omap34xx_cpu_suspend_sz);
 
+#ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
+#endif /* CONFIG_SUSPEND */
 
 	pm_idle = omap3_pm_idle;
 
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index f945156d558..ced555a4cd1 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 
 #include <mach/common.h>
 #include <mach/prcm.h>
@@ -28,6 +29,8 @@
 static void __iomem *prm_base;
 static void __iomem *cm_base;
 
+#define MAX_MODULE_ENABLE_WAIT		100000
+
 u32 omap_prcm_get_reset_sources(void)
 {
 	/* XXX This presumably needs modification for 34XX */
@@ -120,6 +123,46 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
 }
 EXPORT_SYMBOL(cm_rmw_mod_reg_bits);
 
+/**
+ * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
+ * @reg: physical address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @name: name of the clock (for printk)
+ *
+ * Returns 1 if the module indicated readiness in time, or 0 if it
+ * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
+ */
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name)
+{
+	int i = 0;
+	int ena = 0;
+
+	/*
+	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+	 * 34xx reverses this, just to keep us on our toes
+	 */
+	if (cpu_is_omap24xx())
+		ena = mask;
+	else if (cpu_is_omap34xx())
+		ena = 0;
+	else
+		BUG();
+
+	/* Wait for lock */
+	while (((__raw_readl(reg) & mask) != ena) &&
+	       (i++ < MAX_MODULE_ENABLE_WAIT))
+		udelay(1);
+
+	if (i < MAX_MODULE_ENABLE_WAIT)
+		pr_debug("cm: Module associated with clock %s ready after %d "
+			 "loops\n", name, i);
+	else
+		pr_err("cm: Module associated with clock %s didn't enable in "
+		       "%d tries\n", name, MAX_MODULE_ENABLE_WAIT);
+
+	return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+};
+
 void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 {
 	prm_base = omap2_globals->prm;
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 2045441e838..9e3bd4fa781 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -32,7 +32,7 @@
 #include <mach/sdrc.h>
 #include "sdrc.h"
 
-static struct omap_sdrc_params *sdrc_init_params;
+static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
 
 void __iomem *omap2_sdrc_base;
 void __iomem *omap2_sms_base;
@@ -45,33 +45,49 @@ void __iomem *omap2_sms_base;
 /**
  * omap2_sdrc_get_params - return SDRC register values for a given clock rate
  * @r: SDRC clock rate (in Hz)
+ * @sdrc_cs0: chip select 0 ram timings **
+ * @sdrc_cs1: chip select 1 ram timings **
  *
  * Return pre-calculated values for the SDRC_ACTIM_CTRLA,
- * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given
- * SDRC clock rate 'r'.  These parameters control various timing
- * delays in the SDRAM controller that are expressed in terms of the
- * number of SDRC clock cycles to wait; hence the clock rate
- * dependency. Note that sdrc_init_params must be sorted rate
- * descending.  Also assumes that both chip-selects use the same
- * timing parameters.  Returns a struct omap_sdrc_params * upon
- * success, or NULL upon failure.
+ *  SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01]
+ *  structs,for a given SDRC clock rate 'r'.
+ * These parameters control various timing delays in the SDRAM controller
+ *  that are expressed in terms of the number of SDRC clock cycles to
+ *  wait; hence the clock rate dependency.
+ *
+ * Supports 2 different timing parameters for both chip selects.
+ *
+ * Note 1: the sdrc_init_params_cs[01] must be sorted rate descending.
+ * Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size
+ *  as sdrc_init_params_cs_0.
+ *
+ * Fills in the struct omap_sdrc_params * for each chip select.
+ * Returns 0 upon success or -1 upon failure.
  */
-struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
+int omap2_sdrc_get_params(unsigned long r,
+			  struct omap_sdrc_params **sdrc_cs0,
+			  struct omap_sdrc_params **sdrc_cs1)
 {
-	struct omap_sdrc_params *sp;
+	struct omap_sdrc_params *sp0, *sp1;
 
-	if (!sdrc_init_params)
-		return NULL;
+	if (!sdrc_init_params_cs0)
+		return -1;
 
-	sp = sdrc_init_params;
+	sp0 = sdrc_init_params_cs0;
+	sp1 = sdrc_init_params_cs1;
 
-	while (sp->rate && sp->rate != r)
-		sp++;
+	while (sp0->rate && sp0->rate != r) {
+		sp0++;
+		if (sdrc_init_params_cs1)
+			sp1++;
+	}
 
-	if (!sp->rate)
-		return NULL;
+	if (!sp0->rate)
+		return -1;
 
-	return sp;
+	*sdrc_cs0 = sp0;
+	*sdrc_cs1 = sp1;
+	return 0;
 }
 
 
@@ -83,13 +99,15 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
 
 /**
  * omap2_sdrc_init - initialize SMS, SDRC devices on boot
- * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ * @sdrc_cs[01]: pointers to a null-terminated list of struct omap_sdrc_params
+ *  Support for 2 chip selects timings
  *
  * Turn on smart idle modes for SDRAM scheduler and controller.
  * Program a known-good configuration for the SDRC to deal with buggy
  * bootloaders.
  */
-void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
+void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+			    struct omap_sdrc_params *sdrc_cs1)
 {
 	u32 l;
 
@@ -103,11 +121,15 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
 	l |= (0x2 << 3);
 	sdrc_write_reg(l, SDRC_SYSCONFIG);
 
-	sdrc_init_params = sp;
+	sdrc_init_params_cs0 = sdrc_cs0;
+	sdrc_init_params_cs1 = sdrc_cs1;
 
 	/* XXX Enable SRFRONIDLEREQ here also? */
+	/*
+	 * PWDENA should not be set due to 34xx erratum 1.150 - PWDENA
+	 * can cause random memory corruption
+	 */
 	l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
-		(1 << SDRC_POWER_PWDENA_SHIFT) |
 		(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
 	sdrc_write_reg(l, SDRC_POWER);
 }
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b094c15bfe4..a7421a50410 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -54,6 +54,7 @@ struct omap_uart_state {
 
 	struct plat_serial8250_port *p;
 	struct list_head node;
+	struct platform_device pdev;
 
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 	int context_valid;
@@ -68,10 +69,9 @@ struct omap_uart_state {
 #endif
 };
 
-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
 static LIST_HEAD(uart_list);
 
-static struct plat_serial8250_port serial_platform_data[] = {
+static struct plat_serial8250_port serial_platform_data0[] = {
 	{
 		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
@@ -81,6 +81,12 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+		.flags		= 0
+	}
+};
+
+static struct plat_serial8250_port serial_platform_data1[] = {
+	{
 		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
@@ -89,6 +95,12 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+		.flags		= 0
+	}
+};
+
+static struct plat_serial8250_port serial_platform_data2[] = {
+	{
 		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
@@ -217,6 +229,40 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
 	clk_disable(uart->fck);
 }
 
+static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
+{
+	/* Set wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		u32 v = __raw_readl(uart->wk_en);
+		v |= uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are set */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v = omap_ctrl_readw(uart->padconf);
+		v |= OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+}
+
+static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
+{
+	/* Clear wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		u32 v = __raw_readl(uart->wk_en);
+		v &= ~uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are cleared */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v = omap_ctrl_readw(uart->padconf);
+		v &= ~OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+}
+
 static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
 					  int enable)
 {
@@ -246,6 +292,11 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart)
 
 static void omap_uart_allow_sleep(struct omap_uart_state *uart)
 {
+	if (device_may_wakeup(&uart->pdev.dev))
+		omap_uart_enable_wakeup(uart);
+	else
+		omap_uart_disable_wakeup(uart);
+
 	if (!uart->clocked)
 		return;
 
@@ -292,7 +343,6 @@ void omap_uart_resume_idle(int num)
 			/* Check for normal UART wakeup */
 			if (__raw_readl(uart->wk_st) & uart->wk_mask)
 				omap_uart_block_sleep(uart);
-
 			return;
 		}
 	}
@@ -346,16 +396,13 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static u32 sleep_timeout = DEFAULT_TIMEOUT;
-
 static void omap_uart_idle_init(struct omap_uart_state *uart)
 {
-	u32 v;
 	struct plat_serial8250_port *p = uart->p;
 	int ret;
 
 	uart->can_sleep = 0;
-	uart->timeout = sleep_timeout;
+	uart->timeout = DEFAULT_TIMEOUT;
 	setup_timer(&uart->timer, omap_uart_idle_timer,
 		    (unsigned long) uart);
 	mod_timer(&uart->timer, jiffies + uart->timeout);
@@ -413,76 +460,101 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		uart->padconf = 0;
 	}
 
-	/* Set wake-enable bit */
-	if (uart->wk_en && uart->wk_mask) {
-		v = __raw_readl(uart->wk_en);
-		v |= uart->wk_mask;
-		__raw_writel(v, uart->wk_en);
-	}
-
-	/* Ensure IOPAD wake-enables are set */
-	if (cpu_is_omap34xx() && uart->padconf) {
-		u16 v;
-
-		v = omap_ctrl_readw(uart->padconf);
-		v |= OMAP3_PADCONF_WAKEUPENABLE0;
-		omap_ctrl_writew(v, uart->padconf);
-	}
-
 	p->flags |= UPF_SHARE_IRQ;
 	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
 			  "serial idle", (void *)uart);
 	WARN_ON(ret);
 }
 
-static ssize_t sleep_timeout_show(struct kobject *kobj,
-				  struct kobj_attribute *attr,
+void omap_uart_enable_irqs(int enable)
+{
+	int ret;
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (enable)
+			ret = request_irq(uart->p->irq, omap_uart_interrupt,
+				IRQF_SHARED, "serial idle", (void *)uart);
+		else
+			free_irq(uart->p->irq, (void *)uart);
+	}
+}
+
+static ssize_t sleep_timeout_show(struct device *dev,
+				  struct device_attribute *attr,
 				  char *buf)
 {
-	return sprintf(buf, "%u\n", sleep_timeout / HZ);
+	struct platform_device *pdev = container_of(dev,
+					struct platform_device, dev);
+	struct omap_uart_state *uart = container_of(pdev,
+					struct omap_uart_state, pdev);
+
+	return sprintf(buf, "%u\n", uart->timeout / HZ);
 }
 
-static ssize_t sleep_timeout_store(struct kobject *kobj,
-				   struct kobj_attribute *attr,
+static ssize_t sleep_timeout_store(struct device *dev,
+				   struct device_attribute *attr,
 				   const char *buf, size_t n)
 {
-	struct omap_uart_state *uart;
+	struct platform_device *pdev = container_of(dev,
+					struct platform_device, dev);
+	struct omap_uart_state *uart = container_of(pdev,
+					struct omap_uart_state, pdev);
 	unsigned int value;
 
 	if (sscanf(buf, "%u", &value) != 1) {
 		printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
 		return -EINVAL;
 	}
-	sleep_timeout = value * HZ;
-	list_for_each_entry(uart, &uart_list, node) {
-		uart->timeout = sleep_timeout;
-		if (uart->timeout)
-			mod_timer(&uart->timer, jiffies + uart->timeout);
-		else
-			/* A zero value means disable timeout feature */
-			omap_uart_block_sleep(uart);
-	}
+
+	uart->timeout = value * HZ;
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
+	else
+		/* A zero value means disable timeout feature */
+		omap_uart_block_sleep(uart);
+
 	return n;
 }
 
-static struct kobj_attribute sleep_timeout_attr =
-	__ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
-
+DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
 #else
 static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#define DEV_CREATE_FILE(dev, attr)
 #endif /* CONFIG_PM */
 
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
+	{
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM,
+			.dev			= {
+				.platform_data	= serial_platform_data0,
+			},
+		},
+	}, {
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM1,
+			.dev			= {
+				.platform_data	= serial_platform_data1,
+			},
+		},
+	}, {
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM2,
+			.dev			= {
+				.platform_data	= serial_platform_data2,
+			},
+		},
 	},
 };
 
 void __init omap_serial_init(void)
 {
-	int i, err;
+	int i;
 	const struct omap_uart_config *info;
 	char name[16];
 
@@ -496,14 +568,12 @@ void __init omap_serial_init(void)
 
 	if (info == NULL)
 		return;
-	if (cpu_is_omap44xx()) {
-		for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
-			serial_platform_data[i].irq += 32;
-	}
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		struct plat_serial8250_port *p = serial_platform_data + i;
 		struct omap_uart_state *uart = &omap_uart[i];
+		struct platform_device *pdev = &uart->pdev;
+		struct device *dev = &pdev->dev;
+		struct plat_serial8250_port *p = dev->platform_data;
 
 		if (!(info->enabled_uarts & (1 << i))) {
 			p->membase = NULL;
@@ -531,20 +601,21 @@ void __init omap_serial_init(void)
 		uart->num = i;
 		p->private_data = uart;
 		uart->p = p;
-		list_add(&uart->node, &uart_list);
+		list_add_tail(&uart->node, &uart_list);
+
+		if (cpu_is_omap44xx())
+			p->irq += 32;
 
 		omap_uart_enable_clocks(uart);
 		omap_uart_reset(uart);
 		omap_uart_idle_init(uart);
-	}
-
-	err = platform_device_register(&serial_device);
-
-#ifdef CONFIG_PM
-	if (!err)
-		err = sysfs_create_file(&serial_device.dev.kobj,
-					&sleep_timeout_attr.attr);
-#endif
 
+		if (WARN_ON(platform_device_register(pdev)))
+			continue;
+		if ((cpu_is_omap34xx() && uart->padconf) ||
+		    (uart->wk_en && uart->wk_mask)) {
+			device_init_wakeup(dev, true);
+			DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
+		}
+	}
 }
-
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index f41f8d96ddb..82aa4a3d160 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -36,7 +36,7 @@
 
 	.text
 
-/* r4 parameters */
+/* r1 parameters */
 #define SDRC_NO_UNLOCK_DLL		0x0
 #define SDRC_UNLOCK_DLL			0x1
 
@@ -58,7 +58,6 @@
 
 /* SDRC_POWER bit settings */
 #define SRFRONIDLEREQ_MASK		0x40
-#define PWDENA_MASK			0x4
 
 /* CM_IDLEST1_CORE bit settings */
 #define ST_SDRC_MASK			0x2
@@ -71,41 +70,72 @@
 
 /*
  * omap3_sram_configure_core_dpll - change DPLL3 M2 divider
- * r0 = new SDRC_RFR_CTRL register contents
- * r1 = new SDRC_ACTIM_CTRLA register contents
- * r2 = new SDRC_ACTIM_CTRLB register contents
- * r3 = new M2 divider setting (only 1 and 2 supported right now)
- * r4 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
+ *
+ * Params passed in registers:
+ *  r0 = new M2 divider setting (only 1 and 2 supported right now)
+ *  r1 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
  *      SDRC rates < 83MHz
- * r5 = number of MPU cycles to wait for SDRC to stabilize after
+ *  r2 = number of MPU cycles to wait for SDRC to stabilize after
  *      reprogramming the SDRC when switching to a slower MPU speed
- * r6 = new SDRC_MR_0 register value
- * r7 = increasing SDRC rate? (1 = yes, 0 = no)
+ *  r3 = increasing SDRC rate? (1 = yes, 0 = no)
+ *
+ * Params passed via the stack. The needed params will be copied in SRAM
+ *  before use by the code in SRAM (SDRAM is not accessible during SDRC
+ *  reconfiguration):
+ *  new SDRC_RFR_CTRL_0 register contents
+ *  new SDRC_ACTIM_CTRL_A_0 register contents
+ *  new SDRC_ACTIM_CTRL_B_0 register contents
+ *  new SDRC_MR_0 register value
+ *  new SDRC_RFR_CTRL_1 register contents
+ *  new SDRC_ACTIM_CTRL_A_1 register contents
+ *  new SDRC_ACTIM_CTRL_B_1 register contents
+ *  new SDRC_MR_1 register value
  *
+ * If the param SDRC_RFR_CTRL_1 is 0, the parameters
+ *  are not programmed into the SDRC CS1 registers
  */
 ENTRY(omap3_sram_configure_core_dpll)
 	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
-	ldr	r4, [sp, #52]		@ pull extra args off the stack
-	ldr	r5, [sp, #56]		@ load extra args from the stack
-	ldr	r6, [sp, #60]		@ load extra args from the stack
-	ldr	r7, [sp, #64]		@ load extra args from the stack
+
+					@ pull the extra args off the stack
+					@  and store them in SRAM
+	ldr	r4, [sp, #52]
+	str     r4, omap_sdrc_rfr_ctrl_0_val
+	ldr	r4, [sp, #56]
+	str     r4, omap_sdrc_actim_ctrl_a_0_val
+	ldr	r4, [sp, #60]
+	str     r4, omap_sdrc_actim_ctrl_b_0_val
+	ldr	r4, [sp, #64]
+	str     r4, omap_sdrc_mr_0_val
+	ldr	r4, [sp, #68]
+	str     r4, omap_sdrc_rfr_ctrl_1_val
+	cmp	r4, #0			@ if SDRC_RFR_CTRL_1 is 0,
+	beq	skip_cs1_params		@  do not use cs1 params
+	ldr	r4, [sp, #72]
+	str     r4, omap_sdrc_actim_ctrl_a_1_val
+	ldr	r4, [sp, #76]
+	str     r4, omap_sdrc_actim_ctrl_b_1_val
+	ldr	r4, [sp, #80]
+	str     r4, omap_sdrc_mr_1_val
+skip_cs1_params:
 	dsb				@ flush buffered writes to interconnect
-	cmp	r7, #1			@ if increasing SDRC clk rate,
+
+	cmp	r3, #1			@ if increasing SDRC clk rate,
 	bleq	configure_sdrc		@ program the SDRC regs early (for RFR)
-	cmp	r4, #SDRC_UNLOCK_DLL	@ set the intended DLL state
+	cmp	r1, #SDRC_UNLOCK_DLL	@ set the intended DLL state
 	bleq	unlock_dll
 	blne	lock_dll
 	bl	sdram_in_selfrefresh	@ put SDRAM in self refresh, idle SDRC
 	bl 	configure_core_dpll	@ change the DPLL3 M2 divider
+	mov	r12, r2
+	bl	wait_clk_stable		@ wait for SDRC to stabilize
 	bl	enable_sdrc		@ take SDRC out of idle
-	cmp	r4, #SDRC_UNLOCK_DLL	@ wait for DLL status to change
+	cmp	r1, #SDRC_UNLOCK_DLL	@ wait for DLL status to change
 	bleq	wait_dll_unlock
 	blne	wait_dll_lock
-	cmp	r7, #1			@ if increasing SDRC clk rate,
+	cmp	r3, #1			@ if increasing SDRC clk rate,
 	beq	return_to_sdram		@ return to SDRAM code, otherwise,
 	bl	configure_sdrc		@ reprogram SDRC regs now
-	mov	r12, r5
-	bl	wait_clk_stable		@ wait for SDRC to stabilize
 return_to_sdram:
 	isb				@ prevent speculative exec past here
 	mov 	r0, #0 			@ return value
@@ -113,7 +143,7 @@ return_to_sdram:
 unlock_dll:
 	ldr	r11, omap3_sdrc_dlla_ctrl
 	ldr	r12, [r11]
-	and	r12, r12, #FIXEDDELAY_MASK
+	bic	r12, r12, #FIXEDDELAY_MASK
 	orr	r12, r12, #FIXEDDELAY_DEFAULT
 	orr	r12, r12, #DLLIDLE_MASK
 	str	r12, [r11]		@ (no OCP barrier needed)
@@ -129,7 +159,6 @@ sdram_in_selfrefresh:
 	ldr	r12, [r11]		@ read the contents of SDRC_POWER
 	mov	r9, r12			@ keep a copy of SDRC_POWER bits
 	orr 	r12, r12, #SRFRONIDLEREQ_MASK	@ enable self refresh on idle
-	bic 	r12, r12, #PWDENA_MASK	@ clear PWDENA
 	str 	r12, [r11]		@ write back to SDRC_POWER register
 	ldr	r12, [r11]		@ posted-write barrier for SDRC
 idle_sdrc:
@@ -149,7 +178,7 @@ configure_core_dpll:
 	ldr	r12, [r11]
 	ldr	r10, core_m2_mask_val	@ modify m2 for core dpll
 	and	r12, r12, r10
-	orr	r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
+	orr	r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
 	str	r12, [r11]
 	ldr	r12, [r11]		@ posted-write barrier for CM
 	bx	lr
@@ -187,15 +216,34 @@ wait_dll_unlock:
 	bne	wait_dll_unlock
 	bx	lr
 configure_sdrc:
-	ldr	r11, omap3_sdrc_rfr_ctrl
-	str	r0, [r11]
-	ldr	r11, omap3_sdrc_actim_ctrla
-	str	r1, [r11]
-	ldr	r11, omap3_sdrc_actim_ctrlb
-	str	r2, [r11]
+	ldr	r12, omap_sdrc_rfr_ctrl_0_val	@ fetch value from SRAM
+	ldr	r11, omap3_sdrc_rfr_ctrl_0	@ fetch addr from SRAM
+	str	r12, [r11]			@ store
+	ldr	r12, omap_sdrc_actim_ctrl_a_0_val
+	ldr	r11, omap3_sdrc_actim_ctrl_a_0
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_actim_ctrl_b_0_val
+	ldr	r11, omap3_sdrc_actim_ctrl_b_0
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_mr_0_val
 	ldr	r11, omap3_sdrc_mr_0
-	str	r6, [r11]
-	ldr	r6, [r11]		@ posted-write barrier for SDRC
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_rfr_ctrl_1_val
+	cmp	r12, #0			@ if SDRC_RFR_CTRL_1 is 0,
+	beq	skip_cs1_prog		@  do not program cs1 params
+	ldr	r11, omap3_sdrc_rfr_ctrl_1
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_actim_ctrl_a_1_val
+	ldr	r11, omap3_sdrc_actim_ctrl_a_1
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_actim_ctrl_b_1_val
+	ldr	r11, omap3_sdrc_actim_ctrl_b_1
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_mr_1_val
+	ldr	r11, omap3_sdrc_mr_1
+	str	r12, [r11]
+skip_cs1_prog:
+	ldr	r12, [r11]		@ posted-write barrier for SDRC
 	bx	lr
 
 omap3_sdrc_power:
@@ -206,14 +254,40 @@ omap3_cm_idlest1_core:
 	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
 omap3_cm_iclken1_core:
 	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
-omap3_sdrc_rfr_ctrl:
+
+omap3_sdrc_rfr_ctrl_0:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap3_sdrc_actim_ctrla:
+omap3_sdrc_rfr_ctrl_1:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
+omap3_sdrc_actim_ctrl_a_0:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
-omap3_sdrc_actim_ctrlb:
+omap3_sdrc_actim_ctrl_a_1:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
+omap3_sdrc_actim_ctrl_b_0:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_actim_ctrl_b_1:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
 omap3_sdrc_mr_0:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
+omap3_sdrc_mr_1:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
+omap_sdrc_rfr_ctrl_0_val:
+	.word 0xDEADBEEF
+omap_sdrc_rfr_ctrl_1_val:
+	.word 0xDEADBEEF
+omap_sdrc_actim_ctrl_a_0_val:
+	.word 0xDEADBEEF
+omap_sdrc_actim_ctrl_a_1_val:
+	.word 0xDEADBEEF
+omap_sdrc_actim_ctrl_b_0_val:
+	.word 0xDEADBEEF
+omap_sdrc_actim_ctrl_b_1_val:
+	.word 0xDEADBEEF
+omap_sdrc_mr_0_val:
+	.word 0xDEADBEEF
+omap_sdrc_mr_1_val:
+	.word 0xDEADBEEF
+
 omap3_sdrc_dlla_status:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
 omap3_sdrc_dlla_ctrl:
@@ -223,3 +297,4 @@ core_m2_mask_val:
 
 ENTRY(omap3_sram_configure_core_dpll_sz)
 	.word	. - omap3_sram_configure_core_dpll
+
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index d85296dc896..739e59e8025 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -155,20 +155,6 @@ static struct platform_device musb_device = {
 	.resource	= musb_resources,
 };
 
-#ifdef CONFIG_NOP_USB_XCEIV
-static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device nop_xceiv_device = {
-	.name		= "nop_usb_xceiv",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &nop_xceiv_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= NULL,
-	},
-};
-#endif
-
 void __init usb_musb_init(void)
 {
 	if (cpu_is_omap243x())
@@ -183,13 +169,6 @@ void __init usb_musb_init(void)
 	 */
 	musb_plat.clock = "ick";
 
-#ifdef CONFIG_NOP_USB_XCEIV
-	if (platform_device_register(&nop_xceiv_device) < 0) {
-		printk(KERN_ERR "Unable to register NOP-XCEIV device\n");
-		return;
-	}
-#endif
-
 	if (platform_device_register(&musb_device) < 0) {
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
 		return;
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 63b10d9bb1d..9cd09465a0e 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1141,12 +1141,16 @@ struct power_supply_info em_x270_psy_info = {
 
 static void em_x270_battery_low(void)
 {
+#if defined(CONFIG_APM_EMULATION)
 	apm_queue_event(APM_LOW_BATTERY);
+#endif
 }
 
 static void em_x270_battery_critical(void)
 {
+#if defined(CONFIG_APM_EMULATION)
 	apm_queue_event(APM_CRITICAL_SUSPEND);
+#endif
 }
 
 struct da9030_battery_info em_x270_batterty_info = {
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
index ae8441192ef..7139e0dc26d 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -567,9 +567,9 @@
 #define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
 #define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
 
-#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
-#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
-#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, AF0, DS01X)
+#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, AF0, DS01X)
+#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, AF0, DS01X)
 #endif /* CONFIG_CPU_PXA310 */
 
 #endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index ed70f281dd0..169fcc18154 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -128,6 +128,10 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO38_GPIO,	/* wifi ready */
 	GPIO81_GPIO,	/* wifi reset */
 
+	/* FFUART */
+	GPIO34_FFUART_RXD,
+	GPIO39_FFUART_TXD,
+
 	/* HDD */
 	GPIO98_GPIO,	/* HDD reset */
 	GPIO115_GPIO,	/* HDD power */
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index aae64a12a73..33f726ff55e 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -111,6 +111,10 @@ static unsigned long palmt5_pin_config[] __initdata = {
 	/* PWM */
 	GPIO16_PWM0_OUT,
 
+	/* FFUART */
+	GPIO34_FFUART_RXD,
+	GPIO39_FFUART_TXD,
+
 	/* MISC */
 	GPIO10_GPIO,	/* hotsync button */
 	GPIO90_GPIO,	/* power detect */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 6c15d84bde5..83d02087958 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -127,6 +127,10 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO76_LCD_PCLK,
 	GPIO77_LCD_BIAS,
 
+	/* FFUART */
+	GPIO34_FFUART_RXD,
+	GPIO39_FFUART_TXD,
+
 	/* MISC. */
 	GPIO10_GPIO,	/* hotsync button */
 	GPIO12_GPIO,	/* power detect */
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 6f678d93bf4..09b7b1a10ca 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -250,7 +250,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
 static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
 	/* Power I2C clock is always on */
-	INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
 	INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
 	INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
 	INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
index a06f19edebb..753ec4df17b 100644
--- a/arch/arm/mach-pxa/treo680.c
+++ b/arch/arm/mach-pxa/treo680.c
@@ -409,7 +409,7 @@ err1:
 
 static void treo680_irda_shutdown(struct device *dev)
 {
-	gpio_free(GPIO_NR_TREO680_AMP_EN);
+	gpio_free(GPIO_NR_TREO680_IR_EN);
 }
 
 static struct pxaficp_platform_data treo680_ficp_info = {
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index cefd1c0a854..84095440a87 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -197,10 +197,12 @@ static void __init zylonite_detect_lcd_panel(void)
 	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
 		id = id << 1;
 		gpio = mfp_to_gpio(lcd_detect_pins[i]);
+		gpio_request(gpio, "LCD_ID_PINS");
 		gpio_direction_input(gpio);
 
 		if (gpio_get_value(gpio))
 			id = id | 0x1;
+		gpio_free(gpio);
 	}
 
 	/* lcd id, flush out bit 1 */
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index cc5a2283360..60d08f23f5e 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -176,10 +176,12 @@ static void __init zylonite_detect_lcd_panel(void)
 	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
 		id = id << 1;
 		gpio = mfp_to_gpio(lcd_detect_pins[i]);
+		gpio_request(gpio, "LCD_ID_PINS");
 		gpio_direction_input(gpio);
 
 		if (gpio_get_value(gpio))
 			id = id | 0x1;
+		gpio_free(gpio);
 	}
 
 	/* lcd id, flush out bit 1 */
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 9ea9c05093c..facbd49eec6 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -208,8 +208,7 @@ struct platform_device realview_i2c_device = {
 
 static struct i2c_board_info realview_i2c_board_info[] = {
 	{
-		I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
-		.type = "ds1338",
+		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
 	},
 };
 
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
index 8fe192081d3..f8b879a7973 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -28,7 +28,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
 		return NULL;
 
 	chip = &s3c24xx_gpios[pin/32];
-	return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
+	return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL;
 }
 
 #endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 15f0b3e7ce6..0b53cad80fe 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -20,10 +20,11 @@
  * devices that need GPIO.
  */
 
-#define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
+#define ARCH_NR_GPIOS	(512 + CONFIG_S3C24XX_GPIO_EXTRA)
 
 #include <asm-generic/gpio.h>
 #include <mach/gpio-nrs.h>
 #include <mach/gpio-fns.h>
+#include <mach/regs-gpioj.h>
 
-#define S3C_GPIO_END	(S3C2410_GPIO_BANKH + 32)
+#define S3C_GPIO_END	(S3C2440_GPIO_BANKJ + 32)
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 2a2384ffa7b..b6d2c2adbcf 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -153,9 +153,9 @@
 #define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
 
 #ifdef CONFIG_CPU_S3C2443
-#define NR_IRQS (IRQ_S3C2443_AC97+1)
+#define S3C2410_NR_INTERNAL_IRQS (IRQ_S3C2443_AC97+1)
 #else
-#define NR_IRQS (IRQ_S3C2440_AC97+1)
+#define S3C2410_NR_INTERNAL_IRQS (IRQ_S3C2440_AC97+1)
 #endif
 
 /* compatibility define. */
@@ -167,4 +167,22 @@
 /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
 #define FIQ_START		IRQ_EINT0
 
+/* Board specific IRQs
+ * If your board needs a extra set of IRQ numbers add it to the list here.
+ * Make sure that the numbers are kept in descending, so if multiple boards are
+ * selected the maximum will be used and there are enough IRQ numbers available
+ * for each board.
+ */
+
+#if defined(CONFIG_MACH_NEO1973_GTA02)
+#define S3C2410_NR_BOARD_IRQS 9
+#else
+#define S3C2410_NR_BOARD_IRQS 0
+#endif
+
+#define S3C2410_BOARD_IRQ_START S3C2410_NR_INTERNAL_IRQS
+#define S3C2410_BOARD_IRQ_END	(S3C2410_BOARD_IRQ_START + S3C2410_NR_BOARD_IRQS)
+
+#define NR_IRQS			S3C2410_BOARD_IRQ_END
+
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/ts.h b/arch/arm/mach-s3c2410/include/mach/ts.h
new file mode 100644
index 00000000000..ac0c727d155
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/ts.h
@@ -0,0 +1,35 @@
+/* arch/arm/mach-s3c2410/include/mach/ts.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ *  Changelog:
+ *     24-Mar-2005     RTP     Created file
+ *     03-Aug-2005     RTP     Renamed to ts.h
+ */
+
+#ifndef __ASM_ARM_TS_H
+#define __ASM_ARM_TS_H
+
+#include <linux/input/touchscreen/ts_filter.h>
+
+struct s3c2410_ts_mach_info {
+	/* Touchscreen delay. */
+	int delay;
+	/* Prescaler value. */
+	int presc;
+	/*
+	 * Null-terminated array of pointers to filter APIs and configurations
+	 * we want to use. In the same order they will be applied.
+	 */
+	const struct ts_filter_chain_configuration *filter_config;
+};
+
+void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info);
+
+#endif /* __ASM_ARM_TS_H */
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 6a5bc3021bd..ec71a696578 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -48,8 +48,6 @@
 #include <plat/mci.h>
 #include <plat/udc.h>
 
-#include <plat/regs-serial.h>
-
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
@@ -275,6 +273,7 @@ static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
 		.nr_chips	= 1,
 		.nr_partitions	= ARRAY_SIZE(mini2440_default_nand_part),
 		.partitions	= mini2440_default_nand_part,
+		.flash_bbt 	= 1, /* we use u-boot to create a BBT */
 	},
 };
 
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index 103e913f225..8e37b9f42ab 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -33,6 +33,10 @@ config MACH_NEO1973_GTA02
 	select POWER_SUPPLY
 	select MACH_NEO1973
 	select S3C2410_PWM
+	select S3C_DEV_USB_HOST
+	select FIQ
+	select S3C_PWM
+	select S3C24XX_GPIO_EXTRA64
 	help
 	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
 
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
index 2a19113a576..cf39481cb5c 100644
--- a/arch/arm/mach-s3c2442/Makefile
+++ b/arch/arm/mach-s3c2442/Makefile
@@ -12,7 +12,11 @@ obj-				:=
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C2442)	+= clock.o
 
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o \
+	gta02-pm-bt.o \
+	gta02-pm-gps.o \
+	gta02-pm-gsm.o \
+	gta02-pm-wlan.o \
+	gta02-fiq.o
 # Machine support
 
diff --git a/arch/arm/mach-s3c2442/gta02-fiq.c b/arch/arm/mach-s3c2442/gta02-fiq.c
new file mode 100644
index 00000000000..600eb64cf9f
--- /dev/null
+++ b/arch/arm/mach-s3c2442/gta02-fiq.c
@@ -0,0 +1,144 @@
+#include <linux/kernel.h>
+
+#include <asm/fiq.h>
+#include <plat/pwm.h>
+#include <mach/regs-irq.h>
+#include <mach/irqs.h>
+#include <linux/io.h>
+#include <linux/hdq.h>
+
+/* -------------------------------------------------------------------------------
+ * GTA02 FIQ related
+ *
+ * Calls into vibrator and hdq and based on the return values
+ * determines if we the FIQ source be kept alive
+ */
+
+#define DIVISOR_FROM_US(x) ((x) << 3)
+
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+#define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US)
+extern int hdq_fiq_handler(void);
+#endif
+
+#ifdef CONFIG_LEDS_GTA02_VIBRATOR
+#define FIQ_DIVISOR_VIBRATOR DIVISOR_FROM_US(100)
+extern int gta02_vibrator_fiq_handler(void);
+#endif
+
+/* Global data related to our fiq source */
+static uint32_t gta02_fiq_ack_mask;
+static struct s3c2410_pwm gta02_fiq_pwm_timer;
+static uint16_t gta02_fiq_timer_index;
+static int gta02_fiq_irq;
+
+void gta02_fiq_handler(void)
+{
+	uint16_t divisor = 0xffff;
+
+	/* disable further timer interrupts if nobody has any work
+	 * or adjust rate according to who still has work
+	 *
+	 * CAUTION: it means forground code must disable FIQ around
+	 * its own non-atomic S3C2410_INTMSK changes... not common
+	 * thankfully and taken care of by the fiq-basis patch
+	 */
+
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+	if (hdq_fiq_handler())
+		divisor = FIQ_DIVISOR_HDQ;
+#endif
+
+#ifdef CONFIG_LEDS_GTA02_VIBRATOR
+	if (gta02_vibrator_fiq_handler())
+		divisor = FIQ_DIVISOR_VIBRATOR;
+#endif
+
+	if (divisor == 0xffff) /* mask the fiq irq source */
+		__raw_writel(__raw_readl(S3C2410_INTMSK) | gta02_fiq_ack_mask,
+				S3C2410_INTMSK);
+	else /* still working, maybe at a different rate */
+		__raw_writel(divisor, S3C2410_TCNTB(gta02_fiq_timer_index));
+
+	__raw_writel(gta02_fiq_ack_mask, S3C2410_SRCPND);
+}
+
+void gta02_fiq_kick(void)
+{
+	unsigned long flags;
+	uint32_t tcon;
+
+	/* we have to take care about FIQ because this modification is
+	 * non-atomic, FIQ could come in after the read and before the
+	 * writeback and its changes to the register would be lost
+	 * (platform INTMSK mod code is taken care of already)
+	 */
+	local_save_flags(flags);
+	local_fiq_disable();
+	/* allow FIQs to resume */
+	__raw_writel(__raw_readl(S3C2410_INTMSK) &
+			~(1 << (gta02_fiq_irq - S3C2410_CPUIRQ_OFFSET)),
+			S3C2410_INTMSK);
+	tcon = __raw_readl(S3C2410_TCON) & ~S3C2410_TCON_T2START;
+	/* fake the timer to a count of 1 */
+	__raw_writel(1, S3C2410_TCNTB(gta02_fiq_timer_index));
+	__raw_writel(tcon | S3C2410_TCON_T2MANUALUPD, S3C2410_TCON);
+	__raw_writel(tcon | S3C2410_TCON_T2MANUALUPD | S3C2410_TCON_T2START,
+			S3C2410_TCON);
+	__raw_writel(tcon | S3C2410_TCON_T2START, S3C2410_TCON);
+	local_irq_restore(flags);
+}
+
+int gta02_fiq_enable(void)
+{
+	int irq_index_fiq = IRQ_TIMER2;
+	int rc = 0;
+
+	local_fiq_disable();
+
+	gta02_fiq_irq = irq_index_fiq;
+	gta02_fiq_ack_mask = 1 << (irq_index_fiq - S3C2410_CPUIRQ_OFFSET);
+	gta02_fiq_timer_index = (irq_index_fiq - IRQ_TIMER0);
+
+	/* set up the timer to operate as a pwm device */
+
+	rc = s3c2410_pwm_init(&gta02_fiq_pwm_timer);
+	if (rc)
+		goto bail;
+
+	gta02_fiq_pwm_timer.timerid = PWM0 + gta02_fiq_timer_index;
+	gta02_fiq_pwm_timer.prescaler = (6 - 1) / 2;
+	gta02_fiq_pwm_timer.divider = S3C2410_TCFG1_MUX3_DIV2;
+	/* default rate == ~32us */
+	gta02_fiq_pwm_timer.counter = gta02_fiq_pwm_timer.comparer = 3000;
+
+	rc = s3c2410_pwm_enable(&gta02_fiq_pwm_timer);
+	if (rc)
+		goto bail;
+
+	s3c2410_pwm_start(&gta02_fiq_pwm_timer);
+
+	/* let our selected interrupt be a magic FIQ interrupt */
+	__raw_writel(gta02_fiq_ack_mask, S3C2410_INTMOD);
+
+	/* it's ready to go as soon as we unmask the source in S3C2410_INTMSK */
+	local_fiq_enable();
+
+	set_fiq_c_handler(gta02_fiq_handler);
+
+	return 0;
+
+bail:
+	printk(KERN_ERR "Could not initialize FIQ for GTA02: %d\n", rc);
+
+	return rc;
+}
+
+void gta02_fiq_disable(void)
+{
+	__raw_writel(0, S3C2410_INTMOD);
+	local_fiq_disable();
+	gta02_fiq_irq = 0; /* no active source interrupt now either */
+
+}
+/* -------------------- /GTA02 FIQ Handler ------------------------------------- */
diff --git a/arch/arm/mach-s3c2442/gta02-pm-bt.c b/arch/arm/mach-s3c2442/gta02-pm-bt.c
new file mode 100644
index 00000000000..76671ce96d0
--- /dev/null
+++ b/arch/arm/mach-s3c2442/gta02-pm-bt.c
@@ -0,0 +1,257 @@
+/*
+ * Bluetooth PM code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/rfkill.h>
+#include <linux/err.h>
+#include <mach/gpio-fns.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/gpio.h>
+
+#include <linux/regulator/consumer.h>
+
+#define DRVMSG "Openmoko Freerunner Bluetooth Power Management"
+
+struct gta02_pm_bt_data {
+	struct regulator *regulator;
+	struct rfkill *rfkill;
+	int pre_resume_state;
+};
+
+static ssize_t bt_read(struct device *dev, struct device_attribute *attr,
+		       char *buf)
+{
+	int ret = 0;
+	if (!strcmp(attr->attr.name, "power_on")) {
+		if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN))
+			ret = 1;
+	} else if (!strcmp(attr->attr.name, "reset")) {
+		if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN) == 0)
+			ret = 1;
+	}
+
+	if (!ret) {
+		return strlcpy(buf, "0\n", 3);
+	} else {
+		return strlcpy(buf, "1\n", 3);
+	}
+}
+
+static void __gta02_pm_bt_toggle_radio(struct device *dev, unsigned int on)
+{
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
+
+	dev_info(dev, "__gta02_pm_bt_toggle_radio %d\n", on);
+
+	bt_data = dev_get_drvdata(dev);
+
+	s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, !on);
+
+	if (on) {
+		if (!regulator_is_enabled(bt_data->regulator))
+			regulator_enable(bt_data->regulator);
+	} else {
+		if (regulator_is_enabled(bt_data->regulator))
+			regulator_disable(bt_data->regulator);
+	}
+
+	s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on);
+}
+
+
+static int bt_rfkill_set_block(void *data, bool blocked)
+{
+	struct device *dev = data;
+
+	__gta02_pm_bt_toggle_radio(dev, !blocked);
+
+	return 0;
+}
+
+static const struct rfkill_ops gta02_bt_rfkill_ops = {
+       .set_block = bt_rfkill_set_block,
+};
+
+
+static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	unsigned long on = simple_strtoul(buf, NULL, 10);
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
+
+	if (!strcmp(attr->attr.name, "power_on")) {
+		rfkill_set_sw_state(bt_data->rfkill, on ? 1 : 0);
+
+		__gta02_pm_bt_toggle_radio(dev, on);
+	} else if (!strcmp(attr->attr.name, "reset")) {
+		/* reset is low-active, so we need to invert */
+		s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(power_on, 0644, bt_read, bt_write);
+static DEVICE_ATTR(reset, 0644, bt_read, bt_write);
+
+#ifdef CONFIG_PM
+static int gta02_bt_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+
+	dev_dbg(&pdev->dev, DRVMSG ": suspending\n");
+
+	bt_data->pre_resume_state = s3c2410_gpio_getpin(GTA02_GPIO_BT_EN);
+	__gta02_pm_bt_toggle_radio(&pdev->dev, 0);
+
+	return 0;
+}
+
+static int gta02_bt_resume(struct platform_device *pdev)
+{
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+	dev_dbg(&pdev->dev, DRVMSG ": resuming\n");
+
+	__gta02_pm_bt_toggle_radio(&pdev->dev, bt_data->pre_resume_state);
+	return 0;
+}
+#else
+#define gta02_bt_suspend	NULL
+#define gta02_bt_resume		NULL
+#endif
+
+static struct attribute *gta02_bt_sysfs_entries[] = {
+	&dev_attr_power_on.attr,
+	&dev_attr_reset.attr,
+	NULL
+};
+
+static struct attribute_group gta02_bt_attr_group = {
+	.name	= NULL,
+	.attrs	= gta02_bt_sysfs_entries,
+};
+
+static int __init gta02_bt_probe(struct platform_device *pdev)
+{
+	struct rfkill *rfkill;
+	struct regulator *regulator;
+	struct gta02_pm_bt_data *bt_data;
+	int ret;
+
+	dev_info(&pdev->dev, DRVMSG ": starting\n");
+
+	bt_data = kzalloc(sizeof(*bt_data), GFP_KERNEL);
+	dev_set_drvdata(&pdev->dev, bt_data);
+
+	regulator = regulator_get(&pdev->dev, "BT_3V2");
+	if (IS_ERR(regulator))
+		return -ENODEV;
+
+	bt_data->regulator = regulator;
+
+	/* this tests the true physical state of the regulator... */
+	if (regulator_is_enabled(regulator)) {
+		/*
+		 * but these only operate on the logical state of the
+		 * regulator... so we need to logicaly "adopt" it on
+		 * to turn it off
+		 */
+		regulator_enable(regulator);
+		regulator_disable(regulator);
+	}
+
+	/* we pull reset to low to make sure that the chip doesn't
+	 * drain power through the reset line */
+	s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, 0);
+
+	rfkill = rfkill_alloc(pdev->name, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+                            &gta02_bt_rfkill_ops, &pdev->dev);
+
+	if (!rfkill) {
+		dev_err(&pdev->dev, "Failed to allocate rfkill\n");
+		return -ENOMEM;
+	}
+
+    rfkill_init_sw_state(rfkill, 0);
+
+	ret = rfkill_register(rfkill);
+	if (ret) {
+		rfkill_destroy(rfkill);
+		dev_err(&pdev->dev, "Failed to register rfkill\n");
+		return ret;
+	}
+
+	bt_data->rfkill = rfkill;
+
+	return sysfs_create_group(&pdev->dev.kobj, &gta02_bt_attr_group);
+}
+
+static int gta02_bt_remove(struct platform_device *pdev)
+{
+	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+	struct regulator *regulator;
+
+	sysfs_remove_group(&pdev->dev.kobj, &gta02_bt_attr_group);
+
+	if (bt_data->rfkill) {
+		rfkill_destroy(bt_data->rfkill);
+	}
+
+	if (!bt_data || !bt_data->regulator)
+		return 0;
+
+	regulator = bt_data->regulator;
+
+	/* Make sure regulator is disabled before calling regulator_put */
+	if (regulator_is_enabled(regulator))
+		regulator_disable(regulator);
+
+	regulator_put(regulator);
+
+	kfree(bt_data);
+
+	return 0;
+}
+
+static struct platform_driver gta02_bt_driver = {
+	.probe		= gta02_bt_probe,
+	.remove		= gta02_bt_remove,
+	.suspend	= gta02_bt_suspend,
+	.resume		= gta02_bt_resume,
+	.driver		= {
+		.name		= "gta02-pm-bt",
+	},
+};
+
+static int __devinit gta02_bt_init(void)
+{
+	return platform_driver_register(&gta02_bt_driver);
+}
+module_init(gta02_bt_init);
+
+static void gta02_bt_exit(void)
+{
+	platform_driver_unregister(&gta02_bt_driver);
+}
+module_exit(gta02_bt_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION(DRVMSG);
diff --git a/arch/arm/mach-s3c2442/gta02-pm-gps.c b/arch/arm/mach-s3c2442/gta02-pm-gps.c
new file mode 100644
index 00000000000..02be4cec851
--- /dev/null
+++ b/arch/arm/mach-s3c2442/gta02-pm-gps.c
@@ -0,0 +1,241 @@
+/*
+ * GPS Power Management code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007-2009 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio-fns.h>
+
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+
+struct gta02_pm_gps_data {
+#ifdef CONFIG_PM
+	int keep_on_in_suspend;
+#endif
+	int power_was_on;
+	struct regulator *regulator;
+};
+
+static struct gta02_pm_gps_data gta02_gps;
+
+int gta02_pm_gps_is_on(void)
+{
+	return gta02_gps.power_was_on;
+}
+EXPORT_SYMBOL_GPL(gta02_pm_gps_is_on);
+
+/* This is the POWERON pin */
+static void gps_pwron_set(int on)
+{
+	if (on) {
+		/* return UART pins to being UART pins */
+		s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPH4_TXD1);
+		/* remove pulldown now it won't be floating any more */
+		s3c2410_gpio_pullup(S3C2410_GPH(5), 0);
+
+		if (!gta02_gps.power_was_on)
+			regulator_enable(gta02_gps.regulator);
+	} else {
+		/*
+		 * take care not to power unpowered GPS from UART TX
+		 * return them to GPIO and force low
+		 */
+		s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPIO_OUTPUT);
+		s3c2410_gpio_setpin(S3C2410_GPH(4), 0);
+		/* don't let RX from unpowered GPS float */
+		s3c2410_gpio_pullup(S3C2410_GPH(5), 1);
+		if (gta02_gps.power_was_on)
+			regulator_disable(gta02_gps.regulator);
+	}
+}
+
+static int gps_pwron_get(void)
+{
+	return regulator_is_enabled(gta02_gps.regulator);
+}
+
+#ifdef CONFIG_PM
+/* This is the flag for keeping gps ON during suspend */
+static void gps_keep_on_in_suspend_set(int on)
+{
+	gta02_gps.keep_on_in_suspend = on;
+}
+
+static int gps_keep_on_in_suspend_get(void)
+{
+	return gta02_gps.keep_on_in_suspend;
+}
+#endif
+
+static ssize_t power_gps_read(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	int ret = 0;
+
+	if (!strcmp(attr->attr.name, "power_on") ||
+	    !strcmp(attr->attr.name, "pwron")) {
+		ret = gps_pwron_get();
+#ifdef CONFIG_PM
+	} else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
+		ret = gps_keep_on_in_suspend_get();
+#endif
+	}
+	if (ret)
+		return strlcpy(buf, "1\n", 3);
+	else
+		return strlcpy(buf, "0\n", 3);
+}
+
+static ssize_t power_gps_write(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	unsigned long on = simple_strtoul(buf, NULL, 10);
+
+	if (!strcmp(attr->attr.name, "power_on") ||
+	    !strcmp(attr->attr.name, "pwron")) {
+		gps_pwron_set(on);
+		gta02_gps.power_was_on = !!on;
+#ifdef CONFIG_PM
+	} else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
+		gps_keep_on_in_suspend_set(on);
+#endif
+	}
+	return count;
+}
+
+#ifdef CONFIG_PM
+static int gta02_pm_gps_suspend(struct platform_device *pdev,
+				pm_message_t state)
+{
+	if (!gta02_gps.keep_on_in_suspend ||
+		!gta02_gps.power_was_on)
+		gps_pwron_set(0);
+	else
+		dev_warn(&pdev->dev, "GTA02: keeping gps ON "
+			 "during suspend\n");
+	return 0;
+}
+
+static int gta02_pm_gps_resume(struct platform_device *pdev)
+{
+	if (!gta02_gps.keep_on_in_suspend && gta02_gps.power_was_on)
+		gps_pwron_set(1);
+
+	return 0;
+}
+
+static DEVICE_ATTR(keep_on_in_suspend, 0644, power_gps_read, power_gps_write);
+#else
+#define gta02_pm_gps_suspend	NULL
+#define gta02_pm_gps_resume	NULL
+#endif
+
+static DEVICE_ATTR(power_on, 0644, power_gps_read, power_gps_write);
+
+static struct attribute *gta02_gps_sysfs_entries[] = {
+	&dev_attr_power_on.attr,
+#ifdef CONFIG_PM
+	&dev_attr_keep_on_in_suspend.attr,
+#endif
+	NULL
+};
+
+static struct attribute_group gta02_gps_attr_group = {
+	.name	= NULL,
+	.attrs	= gta02_gps_sysfs_entries,
+};
+
+static int __init gta02_pm_gps_probe(struct platform_device *pdev)
+{
+	gta02_gps.regulator = regulator_get(&pdev->dev, "RF_3V");
+	if (IS_ERR(gta02_gps.regulator)) {
+		dev_err(&pdev->dev, "probe failed %ld\n",
+			PTR_ERR(gta02_gps.regulator));
+
+		return PTR_ERR(gta02_gps.regulator);
+	}
+
+	dev_info(&pdev->dev, "starting\n");
+
+	/*
+	 * Here we should call the code that handles the set GPS power
+	 * off action.  But, the regulator API does not allow us to
+	 * reassert regulator state, and when we read the regulator API
+	 * logical state, it can differ from the actual state,  So
+	 * a workaround for this is to just set the regulator off in the
+	 * PMU directly.  Because that's different from normal flow, we
+	 * have to reproduce other things from the OFF action here too.
+	 */
+
+	/*
+	 * u-boot enables LDO5 (GPS), which doesn't make sense and
+	 * causes confusion. We therefore disable the regulator here.
+	 */
+	pcf50633_reg_write(gta02_pcf, PCF50633_REG_LDO5ENA, 0);
+
+	/*
+	 * take care not to power unpowered GPS from UART TX
+	 * return them to GPIO and force low
+	 */
+	s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPH(4), 0);
+	/* don't let RX from unpowered GPS float */
+	s3c2410_gpio_pullup(S3C2410_GPH(5), 1);
+
+	return sysfs_create_group(&pdev->dev.kobj,
+				  &gta02_gps_attr_group);
+}
+
+static int gta02_pm_gps_remove(struct platform_device *pdev)
+{
+	regulator_put(gta02_gps.regulator);
+	sysfs_remove_group(&pdev->dev.kobj, &gta02_gps_attr_group);
+	return 0;
+}
+
+static struct platform_driver gta02_pm_gps_driver = {
+	.probe		= gta02_pm_gps_probe,
+	.remove		= gta02_pm_gps_remove,
+	.suspend	= gta02_pm_gps_suspend,
+	.resume		= gta02_pm_gps_resume,
+	.driver		= {
+		.name		= "gta02-pm-gps",
+	},
+};
+
+static int __devinit gta02_pm_gps_init(void)
+{
+	return platform_driver_register(&gta02_pm_gps_driver);
+}
+module_init(gta02_pm_gps_init);
+
+static void gta02_pm_gps_exit(void)
+{
+	platform_driver_unregister(&gta02_pm_gps_driver);
+}
+module_exit(gta02_pm_gps_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
diff --git a/arch/arm/mach-s3c2442/gta02-pm-gsm.c b/arch/arm/mach-s3c2442/gta02-pm-gsm.c
new file mode 100644
index 00000000000..bef8468dafe
--- /dev/null
+++ b/arch/arm/mach-s3c2442/gta02-pm-gsm.c
@@ -0,0 +1,300 @@
+/*
+ * GSM Management code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/console.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <mach/gpio.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+
+/* FIXME: Add interrupt handler counting irqs or something */
+static int gta_gsm_interrupts;
+
+extern void s3c24xx_serial_console_set_silence(int);
+
+struct gta02pm_priv {
+	int gpio_ndl_gsm;
+	struct console *con;
+};
+
+static struct gta02pm_priv gta02_gsm;
+
+static struct console *find_s3c24xx_console(void)
+{
+	struct console *con;
+
+	acquire_console_sem();
+
+	for (con = console_drivers; con; con = con->next) {
+		if (!strcmp(con->name, "ttySAC"))
+			break;
+	}
+
+	release_console_sem();
+
+	return con;
+}
+
+static ssize_t gsm_read(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	if (!strcmp(attr->attr.name, "power_on")) {
+		if (pcf50633_gpio_get(gta02_pcf, PCF50633_GPIO2))
+			goto out_1;
+	} else if (!strcmp(attr->attr.name, "download")) {
+		if (!s3c2410_gpio_getpin(GTA02_GPIO_nDL_GSM))
+			goto out_1;
+	} else if (!strcmp(attr->attr.name, "flowcontrolled")) {
+		if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT)
+			goto out_1;
+	}
+
+	return strlcpy(buf, "0\n", 3);
+out_1:
+	return strlcpy(buf, "1\n", 3);
+}
+
+static void gsm_on_off(struct device *dev, int on)
+{
+	if (!on) {
+		s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPIO_INPUT);
+
+		pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 0);
+
+		if (gta02_gsm.con) {
+			s3c24xx_serial_console_set_silence(0);
+			console_start(gta02_gsm.con);
+
+			dev_dbg(dev, "powered down gta02 GSM, enabling "
+					"serial console\n");
+		}
+
+		return;
+	}
+
+	if (gta02_gsm.con) {
+		dev_dbg(dev, "powering up GSM, thus "
+				"disconnecting serial console\n");
+
+		console_stop(gta02_gsm.con);
+		s3c24xx_serial_console_set_silence(1);
+	}
+
+	/* allow UART to talk to GSM side now we will power it */
+	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+
+	pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 7);
+
+	msleep(100);
+
+	s3c2410_gpio_setpin(GTA02_GPIO_MODEM_ON, 1);
+	msleep(500);
+	s3c2410_gpio_setpin(GTA02_GPIO_MODEM_ON, 0);
+
+	/*
+	 * workaround for calypso firmware moko10 and earlier,
+	 * without this it will leave IRQ line high after
+	 * booting
+	 */
+	s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+	msleep(1000);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
+
+}
+
+static ssize_t gsm_write(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	unsigned long on = simple_strtoul(buf, NULL, 10);
+
+	if (!strcmp(attr->attr.name, "power_on")) {
+		gsm_on_off(dev, on);
+
+		return count;
+	}
+
+	if (!strcmp(attr->attr.name, "download")) {
+		/*
+		 * the keyboard / buttons driver requests and enables
+		 * the JACK_INSERT IRQ.  We have to take care about
+		 * not enabling and disabling the IRQ when it was
+		 * already in that state or we get "unblanaced IRQ"
+		 * kernel warnings and stack dumps.  So we use the
+		 * copy of the ndl_gsm state to figure out if we should
+		 * enable or disable the jack interrupt
+		 */
+		if (on) {
+			if (gta02_gsm.gpio_ndl_gsm)
+				disable_irq(gpio_to_irq(
+						   GTA02_GPIO_JACK_INSERT));
+		} else {
+			if (!gta02_gsm.gpio_ndl_gsm)
+				enable_irq(gpio_to_irq(
+						   GTA02_GPIO_JACK_INSERT));
+		}
+
+		gta02_gsm.gpio_ndl_gsm = !on;
+		s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, !on);
+
+		return count;
+	}
+
+	if (!strcmp(attr->attr.name, "flowcontrolled")) {
+		if (on) {
+			gta_gsm_interrupts = 0;
+			s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
+			s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+		} else
+			s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(power_on, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(reset, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(download, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(flowcontrolled, 0644, gsm_read, gsm_write);
+
+#ifdef CONFIG_PM
+
+static int gta02_gsm_resume(struct platform_device *pdev);
+static int gta02_gsm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	/* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
+	 * don't need to do much here. */
+
+	/* If flowcontrol asserted, abort if GSM already interrupted */
+	if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT) {
+		if (gta_gsm_interrupts)
+			goto busy;
+	}
+
+	/* disable DL GSM to prevent jack_insert becoming 'floating' */
+	s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1);
+	return 0;
+
+busy:
+	return -EBUSY;
+}
+
+static int
+gta02_gsm_suspend_late(struct platform_device *pdev, pm_message_t state)
+{
+	/* Last chance: abort if GSM already interrupted */
+	if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT) {
+		if (gta_gsm_interrupts)
+			return -EBUSY;
+	}
+	return 0;
+}
+
+static int gta02_gsm_resume(struct platform_device *pdev)
+{
+	/* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
+	 * don't need to do much here. */
+
+	/* Make sure that the kernel console on the serial port is still
+	 * disabled. FIXME: resume ordering race with serial driver! */
+	if (gta02_gsm.con && s3c2410_gpio_getpin(GTA02_GPIO_MODEM_ON))
+		console_stop(gta02_gsm.con);
+
+	s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, gta02_gsm.gpio_ndl_gsm);
+
+	return 0;
+}
+#else
+#define gta02_gsm_suspend	NULL
+#define gta02_gsm_suspend_late	NULL
+#define gta02_gsm_resume	NULL
+#endif /* CONFIG_PM */
+
+static struct attribute *gta02_gsm_sysfs_entries[] = {
+	&dev_attr_power_on.attr,
+	&dev_attr_reset.attr,
+	&dev_attr_download.attr,
+	&dev_attr_flowcontrolled.attr,
+	NULL
+};
+
+static struct attribute_group gta02_gsm_attr_group = {
+	.name	= NULL,
+	.attrs	= gta02_gsm_sysfs_entries,
+};
+
+static int __init gta02_gsm_probe(struct platform_device *pdev)
+{
+	gta02_gsm.con = find_s3c24xx_console();
+	if (!gta02_gsm.con)
+		dev_warn(&pdev->dev,
+			 "cannot find S3C24xx console driver\n");
+
+	/* note that download initially disabled, and enforce that */
+	gta02_gsm.gpio_ndl_gsm = 1;
+	s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1);
+
+	/* GSM is to be initially off (at boot, or if this module inserted) */
+	gsm_on_off(&pdev->dev, 0);
+
+	return sysfs_create_group(&pdev->dev.kobj, &gta02_gsm_attr_group);
+}
+
+static int gta02_gsm_remove(struct platform_device *pdev)
+{
+	sysfs_remove_group(&pdev->dev.kobj, &gta02_gsm_attr_group);
+
+	return 0;
+}
+
+static struct platform_driver gta02_gsm_driver = {
+	.probe		= gta02_gsm_probe,
+	.remove		= gta02_gsm_remove,
+	.suspend	= gta02_gsm_suspend,
+	.suspend_late	= gta02_gsm_suspend_late,
+	.resume		= gta02_gsm_resume,
+	.driver		= {
+		.name		= "gta02-pm-gsm",
+	},
+};
+
+static int __devinit gta02_gsm_init(void)
+{
+	return platform_driver_register(&gta02_gsm_driver);
+}
+module_init(gta02_gsm_init);
+
+static void gta02_gsm_exit(void)
+{
+	platform_driver_unregister(&gta02_gsm_driver);
+}
+module_exit(gta02_gsm_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Openmoko Freerunner GSM Power Management");
diff --git a/arch/arm/mach-s3c2442/gta02-pm-wlan.c b/arch/arm/mach-s3c2442/gta02-pm-wlan.c
new file mode 100644
index 00000000000..6e0226600b1
--- /dev/null
+++ b/arch/arm/mach-s3c2442/gta02-pm-wlan.c
@@ -0,0 +1,201 @@
+/*
+ * GTA02 WLAN power management
+ *
+ * (C) 2008, 2009 by Openmoko Inc.
+ * Author: Andy Green <andy@openmoko.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+#include <mach/gta02-pm-wlan.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/gpio-fns.h>
+
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+
+/* ----- Module hardware reset ("power") ----------------------------------- */
+
+
+void gta02_wlan_reset(int assert_reset)
+{
+	if (assert_reset) {
+		s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 0);
+		msleep(200); /* probably excessive but we don't have specs */
+	} else {
+		s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 1);
+	}
+}
+
+/* ----- rfkill ------------------------------------------------------------ */
+
+/*
+ * S3C MCI handles suspend/resume through device removal/insertion. In order to
+ * preserve rfkill state, as required in clause 7 of section 3.1 in rfkill.txt,
+ * we therefore need to maintain rfkill state outside the driver.
+ *
+ * This platform driver is as good a place as any other.
+ */
+
+static int (*gta02_wlan_rfkill_cb)(void *user, int on);
+static void *gta02_wlan_rfkill_user;
+static DEFINE_MUTEX(gta02_wlan_rfkill_lock);
+static int gta02_wlan_rfkill_on;
+
+/*
+ * gta02_wlan_query_rfkill_lock is used to obtain the rfkill state before the
+ * driver is ready to process rfkill callbacks. To prevent the state from
+ * changing until the driver has completed its initialization, we grab and hold
+ * the rfkill lock.
+ *
+ * A call to gta02_wlan_query_rfkill_lock must be followed by either
+ * - a call to gta02_wlan_set_rfkill_cb, to complete the setup, or
+ * - a call to gta02_wlan_query_rfkill_unlock to abort the setup process.
+ */
+
+int gta02_wlan_query_rfkill_lock(void)
+{
+	mutex_lock(&gta02_wlan_rfkill_lock);
+	return gta02_wlan_rfkill_on;
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_lock);
+
+void gta02_wlan_query_rfkill_unlock(void)
+{
+	mutex_unlock(&gta02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_unlock);
+
+void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user)
+{
+	BUG_ON(!mutex_is_locked(&gta02_wlan_rfkill_lock));
+	BUG_ON(gta02_wlan_rfkill_cb);
+	gta02_wlan_rfkill_cb = cb;
+	gta02_wlan_rfkill_user = user;
+	mutex_unlock(&gta02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_set_rfkill_cb);
+
+void gta02_wlan_clear_rfkill_cb(void)
+{
+	mutex_lock(&gta02_wlan_rfkill_lock);
+	BUG_ON(!gta02_wlan_rfkill_cb);
+	gta02_wlan_rfkill_cb = NULL;
+	mutex_unlock(&gta02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_clear_rfkill_cb);
+
+static int gta02_wlan_set_radio_block(void *data, bool blocked)
+{
+	struct device *dev = data;
+	int res = 0;
+
+	dev_dbg(dev, "gta02_wlan_toggle_radio: blocked %d (%p)\n",
+	    blocked, gta02_wlan_rfkill_cb);
+	mutex_lock(&gta02_wlan_rfkill_lock);
+	if (gta02_wlan_rfkill_cb)
+		res = gta02_wlan_rfkill_cb(gta02_wlan_rfkill_user, !blocked);
+	if (!res)
+		gta02_wlan_rfkill_on = !blocked;
+	mutex_unlock(&gta02_wlan_rfkill_lock);
+	return res;
+}
+
+static const struct rfkill_ops gta02_wlan_rfkill_ops = {
+       .set_block = gta02_wlan_set_radio_block,
+};
+
+/* ----- Initialization/removal -------------------------------------------- */
+
+
+static int __init gta02_wlan_probe(struct platform_device *pdev)
+{
+	/* default-on for now */
+	const int default_state = 1;
+	struct rfkill *rfkill;
+	int ret;
+
+	dev_info(&pdev->dev, "starting\n");
+
+	s3c2410_gpio_cfgpin(GTA02_GPIO_nWLAN_RESET, S3C2410_GPIO_OUTPUT);
+	gta02_wlan_reset(1);
+	gta02_wlan_reset(0);
+
+	rfkill = rfkill_alloc("ar6000", &pdev->dev, RFKILL_TYPE_WLAN,
+							&gta02_wlan_rfkill_ops, &pdev->dev);
+
+
+	if (!rfkill) {
+		dev_err(&pdev->dev, "Failed to allocate rfkill\n");
+		return -ENOMEM;
+	}
+	
+	rfkill_init_sw_state(rfkill, default_state);
+	/*
+	 * If the WLAN driver somehow managed to get activated before we're
+	 * ready, the driver is now in an unknown state, which isn't something
+	 * we're prepared to handle. This can't happen, so just fail hard.
+	 */
+	BUG_ON(gta02_wlan_rfkill_cb);
+	gta02_wlan_rfkill_on = default_state;
+
+	ret = rfkill_register(rfkill);
+	if (ret) {
+		rfkill_destroy(rfkill);
+		dev_err(&pdev->dev, "Failed to register rfkill\n");
+		return ret;
+	}
+
+	dev_set_drvdata(&pdev->dev, rfkill);
+
+	return 0;
+}
+
+static int gta02_wlan_remove(struct platform_device *pdev)
+{
+	struct rfkill *rfkill = dev_get_drvdata(&pdev->dev);
+
+	rfkill_destroy(rfkill);
+
+	return 0;
+}
+
+static struct platform_driver gta02_wlan_driver = {
+	.probe		= gta02_wlan_probe,
+	.remove		= gta02_wlan_remove,
+	.driver		= {
+		.name		= "gta02-pm-wlan",
+	},
+};
+
+static int __devinit gta02_wlan_init(void)
+{
+	return platform_driver_register(&gta02_wlan_driver);
+}
+module_init(gta02_wlan_init);
+
+static void gta02_wlan_exit(void)
+{
+	platform_driver_unregister(&gta02_wlan_driver);
+}
+module_exit(gta02_wlan_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("Openmoko GTA02 WLAN power management");
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02-fiq.h b/arch/arm/mach-s3c2442/include/mach/gta02-fiq.h
new file mode 100644
index 00000000000..90de3530595
--- /dev/null
+++ b/arch/arm/mach-s3c2442/include/mach/gta02-fiq.h
@@ -0,0 +1,9 @@
+#ifndef __GTA02_FIQ_H
+#define __GTA02_FIQ_H
+
+extern void gta02_fiq_handler(void);
+extern void gta02_fiq_kick(void);
+extern int gta02_fiq_enable(void);
+extern void gta02_fiq_disable(void);
+
+#endif
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h b/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h
new file mode 100644
index 00000000000..f15180ac079
--- /dev/null
+++ b/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h
@@ -0,0 +1 @@
+extern int gta02_pm_gps_is_on(void);
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h b/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h
new file mode 100644
index 00000000000..48369789709
--- /dev/null
+++ b/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h
@@ -0,0 +1,10 @@
+#ifndef __MACH_GTA02_PM_WLAN_H
+#define __MACH_GTA02_PM_WLAN_H
+
+void gta02_wlan_reset(int assert_reset);
+int gta02_wlan_query_rfkill_lock(void);
+void gta02_wlan_query_rfkill_unlock(void);
+void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user);
+void gta02_wlan_clear_rfkill_cb(void);
+
+#endif /* __MACH_GTA02_PM_WLAN_H */
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2442/include/mach/gta02.h
index 953331d8d56..b67e5ec2919 100644
--- a/arch/arm/mach-s3c2442/include/mach/gta02.h
+++ b/arch/arm/mach-s3c2442/include/mach/gta02.h
@@ -2,6 +2,7 @@
 #define _GTA02_H
 
 #include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
 
 /* Different hardware revisions, passed in ATAG_REVISION by u-boot */
 #define GTA02v1_SYSTEM_REV	0x00000310
@@ -79,6 +80,11 @@
 #define GTA02_PCB_ID2_0		S3C2410_GPD(3)
 #define GTA02_PCB_ID2_1		S3C2410_GPD(4)
 
+#define GTA02_GPIO_GLAMO_BASE S3C_GPIO_END
+#define GTA02_GPIO_GLAMO(x) (GTA02_GPIO_GLAMO_BASE + (x))
+
 int gta02_get_pcb_revision(void);
 
+extern struct pcf50633 *gta02_pcf;
+
 #endif /* _GTA02_H */
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index e23b581aa0e..eed207a5956 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -38,6 +38,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
 
 #include <linux/mmc/host.h>
 
@@ -49,7 +50,6 @@
 #include <linux/io.h>
 
 #include <linux/i2c.h>
-#include <linux/backlight.h>
 #include <linux/regulator/machine.h>
 
 #include <linux/mfd/pcf50633/core.h>
@@ -57,6 +57,12 @@
 #include <linux/mfd/pcf50633/adc.h>
 #include <linux/mfd/pcf50633/gpio.h>
 #include <linux/mfd/pcf50633/pmic.h>
+#include <linux/mfd/pcf50633/backlight.h>
+
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/leds.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -85,9 +91,33 @@
 #include <plat/pm.h>
 #include <plat/udc.h>
 #include <plat/gpio-cfg.h>
+#include <plat/gpio-core.h>
 #include <plat/iic.h>
 
-static struct pcf50633 *gta02_pcf;
+#include <mach/gta02-pm-gps.h>
+#include <mach/gta02-pm-wlan.h>
+
+#include <linux/jbt6k74.h>
+#include <linux/glamofb.h>
+#include <linux/mfd/glamo.h>
+
+#include <mach/gta02-fiq.h>
+
+#include <linux/hdq.h>
+#include <linux/bq27000_battery.h>
+
+#include <linux/gta02-vibrator.h>
+
+#include <mach/ts.h>
+#include <linux/input/touchscreen/ts_filter_chain.h>
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+#include <linux/input/touchscreen/ts_filter_linear.h>
+#include <linux/input/touchscreen/ts_filter_mean.h>
+#include <linux/input/touchscreen/ts_filter_median.h>
+#include <linux/input/touchscreen/ts_filter_group.h>
+#endif
+
+struct pcf50633 *gta02_pcf;
 
 /*
  * This gets called every 1ms when we paniced.
@@ -149,6 +179,140 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = {
 	},
 };
 
+/*
+ * we crank down SD Card clock dynamically when GPS is powered
+ */
+
+static int gta02_glamo_mci_use_slow(void)
+{
+	return gta02_pm_gps_is_on();
+}
+
+static void gta02_glamo_external_reset(int level)
+{
+	s3c2410_gpio_setpin(GTA02_GPIO_3D_RESET, level);
+	s3c2410_gpio_cfgpin(GTA02_GPIO_3D_RESET, S3C2410_GPIO_OUTPUT);
+}
+
+struct spi_gpio_platform_data spigpio_platform_data = {
+	.sck = GTA02_GPIO_GLAMO(10),
+	.mosi = GTA02_GPIO_GLAMO(11),
+	.miso = GTA02_GPIO_GLAMO(5),
+	.num_chipselect = 1,
+};
+
+static struct platform_device spigpio_device = {
+	.name = "spi_gpio",
+	.id   = 2,
+	.dev = {
+		.platform_data = &spigpio_platform_data,
+	},
+};
+
+static void gta02_glamo_registered(struct device *dev)
+{
+	spigpio_device.dev.parent = dev;
+	platform_device_register(&spigpio_device);
+}
+
+static struct fb_videomode gta02_glamo_modes[] = {
+	{
+		.name = "480x640",
+		.xres = 480,
+		.yres = 640,
+		.pixclock	= 40816,
+		.left_margin	= 8,
+		.right_margin	= 16,
+		.upper_margin	= 2,
+		.lower_margin	= 16,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.vmode = FB_VMODE_NONINTERLACED,
+	}, {
+		.name = "240x320",
+		.xres = 240,
+		.yres = 320,
+		.pixclock	= 40816,
+		.left_margin	= 8,
+		.right_margin	= 16,
+		.upper_margin	= 2,
+		.lower_margin	= 16,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.vmode = FB_VMODE_NONINTERLACED,
+	}
+};
+
+
+static struct glamo_fb_platform_data gta02_glamo_fb_pdata = {
+	.width  = 43,
+	.height = 58,
+
+	.num_modes = ARRAY_SIZE(gta02_glamo_modes),
+	.modes = gta02_glamo_modes,
+};
+
+static struct glamo_mmc_platform_data gta02_glamo_mmc_pdata = {
+	.glamo_mmc_use_slow = gta02_glamo_mci_use_slow,
+};
+
+static struct glamo_gpio_platform_data gta02_glamo_gpio_pdata = {
+	.base = GTA02_GPIO_GLAMO_BASE,
+	.registered = gta02_glamo_registered,
+};
+
+static struct glamo_platform_data gta02_glamo_pdata = {
+	.fb_data    = &gta02_glamo_fb_pdata,
+	.mmc_data   = &gta02_glamo_mmc_pdata,
+	.gpio_data  = &gta02_glamo_gpio_pdata,
+
+	.osci_clock_rate = 32768,
+
+	.glamo_external_reset = gta02_glamo_external_reset,
+};
+
+static struct resource gta02_glamo_resources[] = {
+	[0] = {
+		.start	= S3C2410_CS1,
+		.end	= S3C2410_CS1 + 0x1000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= GTA02_IRQ_3D,
+		.end	= GTA02_IRQ_3D,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= S3C2410_BOARD_IRQ_START,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device gta02_glamo_dev = {
+	.name		= "glamo3362",
+	.num_resources	= ARRAY_SIZE(gta02_glamo_resources),
+	.resource	= gta02_glamo_resources,
+	.dev		= {
+		.platform_data	= &gta02_glamo_pdata,
+	},
+};
+
+static struct platform_device gta02_pm_gps_dev = {
+	.name = "gta02-pm-gps",
+};
+
+static struct platform_device gta02_pm_bt_dev = {
+	.name = "gta02-pm-bt",
+};
+
+static struct platform_device gta02_pm_gsm_dev = {
+	.name = "gta02-pm-gsm",
+};
+
+static struct platform_device gta02_pm_wlan_dev = {
+	.name = "gta02-pm-wlan",
+};
+
 #ifdef CONFIG_CHARGER_PCF50633
 /*
  * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
@@ -161,6 +325,20 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = {
 #define ADC_NOM_CHG_DETECT_1A 6
 #define ADC_NOM_CHG_DETECT_USB 43
 
+static int gta02_get_charger_online_status(void)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+
+	return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE;
+}
+
+static int gta02_get_charger_active_status(void)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+
+	return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ACTIVE;
+}
+
 static void
 gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
 {
@@ -237,6 +415,8 @@ static void gta02_udc_vbus_draw(unsigned int ma)
 #else /* !CONFIG_CHARGER_PCF50633 */
 #define gta02_pmu_event_callback	NULL
 #define gta02_udc_vbus_draw		NULL
+#define gta02_get_charger_online_status	NULL
+#define gta02_get_charger_active_status	NULL
 #endif
 
 /*
@@ -254,6 +434,46 @@ static char *gta02_batteries[] = {
 	"battery",
 };
 
+static struct regulator_consumer_supply ldo4_consumers[] = {
+	{
+		.dev = &gta02_pm_bt_dev.dev,
+		.supply = "BT_3V2",
+	},
+};
+
+static struct regulator_consumer_supply ldo5_consumers[] = {
+	{
+		.dev = &gta02_pm_gps_dev.dev,
+		.supply = "RF_3V",
+	},
+};
+
+static struct regulator_consumer_supply hcldo_consumers[] = {
+	{
+		.dev = &gta02_glamo_dev.dev,
+		.supply = "SD_3V3",
+	},
+};
+
+#if 0
+/* This will come with 2.6.32. Don't forget to uncomment it then. */
+static struct regulator_consumer_supply ldo6_consumers[] = {
+	REGULATOR_SUPPLY("VDC", "jbt6k74"),
+	REGULATOR_SUPPLY("VDDIO", "jbt6k74"),
+};
+#else
+static struct regulator_consumer_supply ldo6_consumers[] = {
+	{ .supply = "VDC", },
+	{ .supply = "VDDIO", },
+};
+#endif
+
+static struct pcf50633_bl_platform_data gta02_backlight_data = {
+	.default_brightness = 0x3f,
+	.default_brightness_limit = 0,
+	.ramp_time = 3,
+};
+
 struct pcf50633_platform_data gta02_pcf_pdata = {
 	.resumers = {
 		[0] =	PCF50633_INT1_USBINS |
@@ -268,6 +488,11 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
 
 	.batteries = gta02_batteries,
 	.num_batteries = ARRAY_SIZE(gta02_batteries),
+
+	.chg_ref_current_ma = 1000,
+
+	.backlight_data = &gta02_backlight_data,
+
 	.reg_init_data = {
 		[PCF50633_REGULATOR_AUTO] = {
 			.constraints = {
@@ -310,6 +535,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
 				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
 				.always_on = 1,
 			},
+			.num_consumer_supplies = ARRAY_SIZE(hcldo_consumers),
+			.consumer_supplies = hcldo_consumers,
 		},
 		[PCF50633_REGULATOR_LDO1] = {
 			.constraints = {
@@ -345,6 +572,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
 				.apply_uV = 1,
 			},
+			.num_consumer_supplies = ARRAY_SIZE(ldo4_consumers),
+			.consumer_supplies = ldo4_consumers,
 		},
 		[PCF50633_REGULATOR_LDO5] = {
 			.constraints = {
@@ -356,6 +585,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
 					.enabled = 1,
 				},
 			},
+			.num_consumer_supplies = ARRAY_SIZE(ldo5_consumers),
+			.consumer_supplies = ldo5_consumers,
 		},
 		[PCF50633_REGULATOR_LDO6] = {
 			.constraints = {
@@ -363,6 +594,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
 				.max_uV = 3000000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
 			},
+			.num_consumer_supplies = ARRAY_SIZE(ldo6_consumers),
+			.consumer_supplies = ldo6_consumers,
 		},
 		[PCF50633_REGULATOR_MEMLDO] = {
 			.constraints = {
@@ -433,8 +666,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = {
 		 */
 		.name		= "neo1973-nand",
 		.nr_chips	= 1,
-		.use_bbt	= 1,
-		.force_soft_ecc	= 1,
+		.flash_bbt	= 1,
 	},
 };
 
@@ -449,6 +681,7 @@ static struct s3c2410_platform_nand gta02_nand_info = {
 	.twrph1		= 15,
 	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
 	.sets		= gta02_nand_sets,
+	.software_ecc	= 1,
 };
 
 
@@ -457,11 +690,11 @@ static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
 	switch (cmd) {
 	case S3C2410_UDC_P_ENABLE:
 		pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__);
-		gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1);
+		gpio_set_value(GTA02_GPIO_USB_PULLUP, 1);
 		break;
 	case S3C2410_UDC_P_DISABLE:
 		pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__);
-		gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0);
+		gpio_set_value(GTA02_GPIO_USB_PULLUP, 0);
 		break;
 	case S3C2410_UDC_P_RESET:
 		pr_debug("%s S3C2410_UDC_P_RESET\n", __func__);
@@ -476,81 +709,246 @@ static struct s3c2410_udc_mach_info gta02_udc_cfg = {
 
 };
 
+/* Touchscreen configuration. */
 
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+const static struct ts_filter_group_configuration gta02_ts_group = {
+	.length = 12,
+	.close_enough = 10,
+	.threshold = 6,		/* At least half of the points in a group. */
+	.attempts = 10,
+};
 
-static void gta02_bl_set_intensity(int intensity)
+const static struct ts_filter_median_configuration gta02_ts_median = {
+	.extent = 20,
+	.decimation_below = 3,
+	.decimation_threshold = 8 * 3,
+	.decimation_above = 4,
+};
+
+const static struct ts_filter_mean_configuration gta02_ts_mean = {
+	.length = 4,
+};
+
+const static struct ts_filter_linear_configuration gta02_ts_linear = {
+	.constants = {1, 0, 0, 0, 1, 0, 1},	/* Don't modify coords. */
+	.coord0 = 0,
+	.coord1 = 1,
+};
+#endif
+
+const static struct ts_filter_chain_configuration gta02_filter_configuration[] =
 {
-	struct pcf50633 *pcf = gta02_pcf;
-	int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+	{&ts_filter_group_api,		&gta02_ts_group.config},
+	{&ts_filter_median_api,		&gta02_ts_median.config},
+	{&ts_filter_mean_api,		&gta02_ts_mean.config},
+	{&ts_filter_linear_api,		&gta02_ts_linear.config},
+#endif
+	{NULL, NULL},
+};
 
-	/* We map 8-bit intensity to 6-bit intensity in hardware. */
-	intensity >>= 2;
+const static struct s3c2410_ts_mach_info gta02_ts_cfg = {
+	.delay = 10000,
+	.presc = 0xff, /* slow as we can go */
+	.filter_config = gta02_filter_configuration,
+};
 
-	/*
-	 * This can happen during, eg, print of panic on blanked console,
-	 * but we can't service i2c without interrupts active, so abort.
-	 */
-	if (in_atomic()) {
-		printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n");
-		return;
-	}
 
-	old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
-	if (intensity == old_intensity)
-		return;
+/* USB */
+static struct s3c2410_hcd_info gta02_usb_info = {
+	.port[0]	= {
+		.flags	= S3C_HCDFLG_USED,
+	},
+	.port[1]	= {
+		.flags	= 0,
+	},
+};
 
-	/* We can't do this anywhere else. */
-	pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
+/* Buttons */
+static struct gpio_keys_button gta02_buttons[] = {
+	{
+		.gpio = GTA02_GPIO_AUX_KEY,
+		.code = KEY_PHONE,
+		.desc = "Aux",
+		.type = EV_KEY,
+		.debounce_interval = 100,
+	},
+	{
+		.gpio = GTA02_GPIO_HOLD_KEY,
+		.code = KEY_PAUSE,
+		.desc = "Hold",
+		.type = EV_KEY,
+		.debounce_interval = 100,
+	},
+};
 
-	if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
-		old_intensity = 0;
+static struct gpio_keys_platform_data gta02_buttons_pdata = {
+	.buttons = gta02_buttons,
+	.nbuttons = ARRAY_SIZE(gta02_buttons),
+};
 
-	/*
-	 * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
-	 * if seen, you have to re-enable the LED unit.
-	 */
-	if (!intensity || !old_intensity)
-		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
+static struct platform_device gta02_buttons_device = {
+	.name = "gpio-keys",
+	.id = -1,
+	.dev = {
+		.platform_data = &gta02_buttons_pdata,
+	},
+};
+
+/* LEDs */
+static struct gpio_led gta02_gpio_leds[] = {
+	{
+		.name	= "gta02:orange:power",
+		.gpio	= GTA02_GPIO_PWR_LED1,
+	},
+	{
+		.name	= "gta02:blue:power",
+		.gpio	= GTA02_GPIO_PWR_LED2,
+	},
+	{
+		.name	= "gta02:red:aux",
+		.gpio	= GTA02_GPIO_AUX_LED,
+	},
+};
 
-	/* Illegal to set LEDOUT to 0. */
-	if (!intensity)
-		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2);
-	else
-		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
-					  intensity);
+static struct gpio_led_platform_data gta02_gpio_leds_pdata = {
+	.leds = gta02_gpio_leds,
+	.num_leds = ARRAY_SIZE(gta02_gpio_leds),
+};
 
-	if (intensity)
-		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
+static struct platform_device gta02_leds_device = {
+	.name	= "leds-gpio",
+	.id		= -1,
+	.dev = {
+		.platform_data = &gta02_gpio_leds_pdata,
+	},
+};
 
+/* JBT6k74 display controller */
+static void gta02_jbt6k74_probe_completed(struct device *dev)
+{
+	pcf50633_bl_set_brightness_limit(gta02_pcf, 0x3f);
 }
 
-static struct generic_bl_info gta02_bl_info = {
-	.name			= "gta02-bl",
-	.max_intensity		= 0xff,
-	.default_intensity	= 0xff,
-	.set_bl_intensity	= gta02_bl_set_intensity,
+const struct jbt6k74_platform_data jbt6k74_pdata = {
+	.probe_completed = gta02_jbt6k74_probe_completed,
+	.gpio_reset = GTA02_GPIO_GLAMO(4),
 };
 
-static struct platform_device gta02_bl_dev = {
-	.name			= "generic-bl",
-	.id			= 1,
+static struct spi_board_info gta02_spi_board_info[] = {
+	{
+		.modalias	= "jbt6k74",
+		.platform_data	= &jbt6k74_pdata,
+		.controller_data = (void*)GTA02_GPIO_GLAMO(12),
+		/* irq */
+		.max_speed_hz	= 100 * 1000,
+		.bus_num	= 2,
+		.chip_select = 0
+	},
+};
+
+/* BQ27000 Battery */
+
+struct bq27000_platform_data bq27000_pdata = {
+	.name = "battery",
+	.rsense_mohms = 20,
+	.hdq_read = hdq_read,
+	.hdq_write = hdq_write,
+	.hdq_initialized = hdq_initialized,
+	.get_charger_online_status = gta02_get_charger_online_status,
+	.get_charger_active_status = gta02_get_charger_active_status
+};
+
+struct platform_device bq27000_battery_device = {
+	.name 		= "bq27000-battery",
 	.dev = {
-		.platform_data = &gta02_bl_info,
+		.platform_data = &bq27000_pdata,
 	},
 };
 
+/* HDQ */
 
+static void gta02_hdq_attach_child_devices(struct device *parent_device)
+{
+	bq27000_battery_device.dev.parent = parent_device;
+	platform_device_register(&bq27000_battery_device);
+}
 
-/* USB */
-static struct s3c2410_hcd_info gta02_usb_info = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED,
+static void gta02_hdq_gpio_direction_out(void)
+{
+	s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_OUTPUT);
+}
+
+static void gta02_hdq_gpio_direction_in(void)
+{
+	s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_INPUT);
+}
+
+static void gta02_hdq_gpio_set_value(int val)
+{
+
+	s3c2410_gpio_setpin(GTA02v5_GPIO_HDQ, val);
+}
+
+static int gta02_hdq_gpio_get_value(void)
+{
+	return s3c2410_gpio_getpin(GTA02v5_GPIO_HDQ);
+}
+
+static struct resource gta02_hdq_resources[] = {
+	[0] = {
+		.start	= GTA02v5_GPIO_HDQ,
+		.end	= GTA02v5_GPIO_HDQ,
 	},
-	.port[1]	= {
-		.flags	= 0,
+};
+
+struct hdq_platform_data gta02_hdq_platform_data = {
+	.attach_child_devices = gta02_hdq_attach_child_devices,
+	.gpio_dir_out = gta02_hdq_gpio_direction_out,
+	.gpio_dir_in = gta02_hdq_gpio_direction_in,
+	.gpio_set = gta02_hdq_gpio_set_value,
+	.gpio_get = gta02_hdq_gpio_get_value,
+
+	.enable_fiq = gta02_fiq_enable,
+	.disable_fiq = gta02_fiq_disable,
+	.kick_fiq = gta02_fiq_kick,
+
+};
+
+struct platform_device gta02_hdq_device = {
+	.name 		= "hdq",
+	.num_resources	= 1,
+	.resource	= gta02_hdq_resources,
+	.dev		= {
+		.platform_data = &gta02_hdq_platform_data,
+		.parent = &s3c24xx_pwm_device.dev,
 	},
 };
 
+/* vibrator (child of FIQ) */
+
+static struct resource gta02_vibrator_resources[] = {
+	[0] = {
+		.start	= GTA02_GPIO_VIBRATOR_ON,
+		.end	= GTA02_GPIO_VIBRATOR_ON,
+	},
+};
+
+struct gta02_vib_platform_data gta02_vib_pdata = {
+	.enable_fiq = gta02_fiq_enable,
+	.disable_fiq = gta02_fiq_disable,
+	.kick_fiq = gta02_fiq_kick,
+};
+
+static struct platform_device gta02_vibrator_device = {
+	.name		= "gta02-vibrator",
+	.num_resources	= ARRAY_SIZE(gta02_vibrator_resources),
+	.resource	= gta02_vibrator_resources,
+	.dev	 = {
+		.platform_data = &gta02_vib_pdata,
+	},
+};
 
 static void __init gta02_map_io(void)
 {
@@ -572,12 +970,22 @@ static struct platform_device *gta02_devices[] __initdata = {
 	&s3c24xx_pwm_device,
 	&s3c_device_iis,
 	&s3c_device_i2c0,
+	&gta02_buttons_device,
+	&gta02_leds_device,
+	&gta02_pm_gps_dev,
+	&gta02_pm_bt_dev,
+	&gta02_pm_gsm_dev,
+	&gta02_pm_wlan_dev,
+	&s3c_device_adc,
 };
 
 /* These guys DO need to be children of PMU. */
 
 static struct platform_device *gta02_devices_pmu_children[] = {
-	&gta02_bl_dev,
+	&s3c_device_ts,
+	&gta02_glamo_dev,
+	&gta02_hdq_device,
+	&gta02_vibrator_device,
 };
 
 
@@ -610,11 +1018,97 @@ static void gta02_poweroff(void)
 	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
 }
 
+/* On hardware rev 5 and earlier the leds are missing a resistor and reading
+ * from their gpio pins will always return 0, so we have to shadow the
+ * led states software */
+static unsigned long gpb_shadow;
+extern struct s3c_gpio_chip s3c24xx_gpios[];
+
+static void gta02_gpb_set(struct gpio_chip *chip,
+				unsigned offset, int value)
+{
+	void __iomem *base = S3C24XX_GPIO_BASE(S3C2410_GPB(0));
+	unsigned long flags;
+	unsigned long dat;
+
+	local_irq_save(flags);
+
+	dat = __raw_readl(base + 0x04) | gpb_shadow;
+	dat &= ~(1 << offset);
+	gpb_shadow &= ~(1 << offset);
+	if (value) {
+		dat |= 1 << offset;
+		switch (offset) {
+		case 0 ... 2:
+			gpb_shadow |= 1 << offset;
+			break;
+		default:
+			break;
+		}
+	}
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+}
+
+static int gta02_gpb_get(struct gpio_chip *chip, unsigned offset)
+{
+	void __iomem *base = S3C24XX_GPIO_BASE(S3C2410_GPB(0));
+	unsigned long val;
+
+	val = __raw_readl(base + 0x04) | gpb_shadow;
+	val >>= offset;
+	val &= 1;
+
+	return val;
+}
+
+static void gta02_hijack_gpb(void)
+{
+/* Uncomment this, once support for S3C_SYSTEM_REV_ATAG has been merged
+ * upstream.
+	if (S3C_SYSTEM_REV_ATAG > GTA02v5_SYSTEM_REV)
+		return;
+*/
+
+	s3c24xx_gpios[1].chip.set = gta02_gpb_set;
+	s3c24xx_gpios[1].chip.get = gta02_gpb_get;
+}
+
+/*
+ * Allow the bootloader to enable hw ecc
+ * hardware_ecc=1|0
+ */
+static int __init hardware_ecc_setup(char *str)
+{
+	if (str && str[0] == '1')
+		gta02_nand_info.software_ecc = 0;
+	return 1;
+}
+__setup("hardware_ecc=", hardware_ecc_setup);
+
+static void gta02_request_gpios(void)
+{
+	int ret;
+	ret = gpio_request(GTA02_GPIO_USB_PULLUP, "USB pullup");
+	if (ret) {
+		printk(KERN_ERR "Failed to request USB pullup gpio pin: %d\n", ret);
+	} else {
+		ret = gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0);
+		if (ret)
+			printk(KERN_ERR "Failed to set USB pullup gpio direction: %d\n", ret);
+    }
+}
+
 static void __init gta02_machine_init(void)
 {
 	/* Set the panic callback to make AUX LED blink at ~5Hz. */
 	panic_blink = gta02_panic_blink;
 
+	gta02_hijack_gpb();
+
+	gta02_request_gpios();
+
 	s3c_pm_init();
 
 #ifdef CONFIG_CHARGER_PCF50633
@@ -626,8 +1120,11 @@ static void __init gta02_machine_init(void)
 
 	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
+	set_s3c2410ts_info(&gta02_ts_cfg);
 
 	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+	spi_register_board_info(gta02_spi_board_info,
+				ARRAY_SIZE(gta02_spi_board_info));
 
 	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
 	pm_power_off = gta02_poweroff;
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 5cd04d6751b..111f7ea32b3 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/io.h>
+#include <linux/seq_file.h>
 
 #include <asm/clkdev.h>
 #include <mach/hardware.h>
@@ -702,6 +703,7 @@ static struct clk amba_clk = {
 	.rate	    = 52000000, /* this varies! */
 	.hw_ctrld   = true,
 	.reset	    = false,
+	.lock       = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
 };
 
 /*
@@ -720,6 +722,7 @@ static struct clk cpu_clk = {
 	.set_rate   = clk_set_rate_cpuclk,
 	.get_rate   = clk_get_rate_cpuclk,
 	.round_rate = clk_round_rate_cpuclk,
+	.lock       = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
 };
 
 static struct clk nandif_clk = {
@@ -732,6 +735,7 @@ static struct clk nandif_clk = {
 	.clk_val    = U300_SYSCON_SBCER_NANDIF_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
 };
 
 static struct clk semi_clk = {
@@ -744,6 +748,7 @@ static struct clk semi_clk = {
 	.clk_val    = U300_SYSCON_SBCER_SEMI_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -758,6 +763,7 @@ static struct clk isp_clk = {
 	.clk_val    = U300_SYSCON_SBCER_ISP_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
 };
 
 static struct clk cds_clk = {
@@ -771,6 +777,7 @@ static struct clk cds_clk = {
 	.clk_val    = U300_SYSCON_SBCER_CDS_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
 };
 #endif
 
@@ -785,6 +792,7 @@ static struct clk dma_clk = {
 	.clk_val    = U300_SYSCON_SBCER_DMAC_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
 };
 
 static struct clk aaif_clk = {
@@ -798,6 +806,7 @@ static struct clk aaif_clk = {
 	.clk_val    = U300_SYSCON_SBCER_AAIF_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
 };
 
 static struct clk apex_clk = {
@@ -811,6 +820,7 @@ static struct clk apex_clk = {
 	.clk_val    = U300_SYSCON_SBCER_APEX_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
 };
 
 static struct clk video_enc_clk = {
@@ -825,6 +835,7 @@ static struct clk video_enc_clk = {
 	.clk_val    = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
 };
 
 static struct clk xgam_clk = {
@@ -839,6 +850,7 @@ static struct clk xgam_clk = {
 	.get_rate   = clk_get_rate_xgamclk,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
 };
 
 /* This clock is used to activate the video encoder */
@@ -854,6 +866,7 @@ static struct clk ahb_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_ahb_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
 };
 
 
@@ -871,6 +884,7 @@ static struct clk ahb_subsys_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_ahb_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
 };
 
 static struct clk intcon_clk = {
@@ -882,6 +896,8 @@ static struct clk intcon_clk = {
 	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 	.res_mask   = U300_SYSCON_RRR_INTCON_RESET_EN,
 	/* INTCON can be reset but not clock-gated */
+	.lock       = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
+
 };
 
 static struct clk mspro_clk = {
@@ -895,6 +911,7 @@ static struct clk mspro_clk = {
 	.clk_val    = U300_SYSCON_SBCER_MSPRO_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
 };
 
 static struct clk emif_clk = {
@@ -909,6 +926,7 @@ static struct clk emif_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_emif_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
 };
 
 
@@ -926,6 +944,7 @@ static struct clk fast_clk = {
 	.clk_val    = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
 };
 
 static struct clk mmcsd_clk = {
@@ -942,6 +961,7 @@ static struct clk mmcsd_clk = {
 	.round_rate = clk_round_rate_mclk,
 	.disable    = syscon_clk_disable,
 	.enable     = syscon_clk_enable,
+	.lock       = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
 };
 
 static struct clk i2s0_clk = {
@@ -956,6 +976,7 @@ static struct clk i2s0_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
 };
 
 static struct clk i2s1_clk = {
@@ -970,6 +991,7 @@ static struct clk i2s1_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
 };
 
 static struct clk i2c0_clk = {
@@ -984,6 +1006,7 @@ static struct clk i2c0_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
 };
 
 static struct clk i2c1_clk = {
@@ -998,6 +1021,7 @@ static struct clk i2c1_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
 };
 
 static struct clk spi_clk = {
@@ -1012,6 +1036,7 @@ static struct clk spi_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -1026,6 +1051,7 @@ static struct clk uart1_clk = {
 	.clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
 };
 #endif
 
@@ -1044,6 +1070,7 @@ static struct clk slow_clk = {
 	.clk_val    = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
 };
 
 /* TODO: implement SYSCON clock? */
@@ -1055,6 +1082,7 @@ static struct clk wdog_clk = {
 	.rate	    = 32768,
 	.reset	    = false,
 	/* This is always on, cannot be enabled/disabled or reset */
+	.lock       = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
 };
 
 /* This one is hardwired to PLL13 */
@@ -1069,6 +1097,7 @@ static struct clk uart_clk = {
 	.clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(uart_clk.lock),
 };
 
 static struct clk keypad_clk = {
@@ -1082,6 +1111,7 @@ static struct clk keypad_clk = {
 	.clk_val    = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
 };
 
 static struct clk gpio_clk = {
@@ -1095,6 +1125,7 @@ static struct clk gpio_clk = {
 	.clk_val    = U300_SYSCON_SBCER_GPIO_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
 };
 
 static struct clk rtc_clk = {
@@ -1106,6 +1137,7 @@ static struct clk rtc_clk = {
 	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
 	.res_mask   = U300_SYSCON_RSR_RTC_RESET_EN,
 	/* This clock is always on, cannot be enabled/disabled */
+	.lock       = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
 };
 
 static struct clk bustr_clk = {
@@ -1119,6 +1151,7 @@ static struct clk bustr_clk = {
 	.clk_val    = U300_SYSCON_SBCER_BTR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
 };
 
 static struct clk evhist_clk = {
@@ -1132,6 +1165,7 @@ static struct clk evhist_clk = {
 	.clk_val    = U300_SYSCON_SBCER_EH_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
 };
 
 static struct clk timer_clk = {
@@ -1145,6 +1179,7 @@ static struct clk timer_clk = {
 	.clk_val    = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
 };
 
 static struct clk app_timer_clk = {
@@ -1158,6 +1193,7 @@ static struct clk app_timer_clk = {
 	.clk_val    = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -1172,6 +1208,7 @@ static struct clk ppm_clk = {
 	.clk_val    = U300_SYSCON_SBCER_PPM_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
 };
 #endif
 
@@ -1187,53 +1224,53 @@ static struct clk ppm_clk = {
  */
 static struct clk_lookup lookups[] = {
 	/* Connected directly to the AMBA bus */
-	DEF_LOOKUP("amba", &amba_clk),
-	DEF_LOOKUP("cpu", &cpu_clk),
-	DEF_LOOKUP("nandif", &nandif_clk),
-	DEF_LOOKUP("semi", &semi_clk),
+	DEF_LOOKUP("amba",      &amba_clk),
+	DEF_LOOKUP("cpu",       &cpu_clk),
+	DEF_LOOKUP("fsmc",      &nandif_clk),
+	DEF_LOOKUP("semi",      &semi_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("isp", &isp_clk),
-	DEF_LOOKUP("cds", &cds_clk),
+	DEF_LOOKUP("isp",       &isp_clk),
+	DEF_LOOKUP("cds",       &cds_clk),
 #endif
-	DEF_LOOKUP("dma", &dma_clk),
-	DEF_LOOKUP("aaif", &aaif_clk),
-	DEF_LOOKUP("apex", &apex_clk),
+	DEF_LOOKUP("dma",       &dma_clk),
+	DEF_LOOKUP("msl",       &aaif_clk),
+	DEF_LOOKUP("apex",      &apex_clk),
 	DEF_LOOKUP("video_enc", &video_enc_clk),
-	DEF_LOOKUP("xgam", &xgam_clk),
-	DEF_LOOKUP("ahb", &ahb_clk),
+	DEF_LOOKUP("xgam",      &xgam_clk),
+	DEF_LOOKUP("ahb",       &ahb_clk),
 	/* AHB bridge clocks */
-	DEF_LOOKUP("ahb", &ahb_subsys_clk),
-	DEF_LOOKUP("intcon", &intcon_clk),
-	DEF_LOOKUP("mspro", &mspro_clk),
-	DEF_LOOKUP("pl172", &emif_clk),
+	DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
+	DEF_LOOKUP("intcon",    &intcon_clk),
+	DEF_LOOKUP("mspro",     &mspro_clk),
+	DEF_LOOKUP("pl172",     &emif_clk),
 	/* FAST bridge clocks */
-	DEF_LOOKUP("fast", &fast_clk),
-	DEF_LOOKUP("mmci", &mmcsd_clk),
+	DEF_LOOKUP("fast",      &fast_clk),
+	DEF_LOOKUP("mmci",      &mmcsd_clk),
 	/*
 	 * The .0 and .1 identifiers on these comes from the platform device
 	 * .id field and are assigned when the platform devices are registered.
 	 */
-	DEF_LOOKUP("i2s.0", &i2s0_clk),
-	DEF_LOOKUP("i2s.1", &i2s1_clk),
-	DEF_LOOKUP("stddci2c.0", &i2c0_clk),
-	DEF_LOOKUP("stddci2c.1", &i2c1_clk),
-	DEF_LOOKUP("pl022", &spi_clk),
+	DEF_LOOKUP("i2s.0",     &i2s0_clk),
+	DEF_LOOKUP("i2s.1",     &i2s1_clk),
+	DEF_LOOKUP("stu300.0",  &i2c0_clk),
+	DEF_LOOKUP("stu300.1",  &i2c1_clk),
+	DEF_LOOKUP("pl022",     &spi_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("uart1", &uart1_clk),
+	DEF_LOOKUP("uart1",     &uart1_clk),
 #endif
 	/* SLOW bridge clocks */
-	DEF_LOOKUP("slow", &slow_clk),
-	DEF_LOOKUP("wdog", &wdog_clk),
-	DEF_LOOKUP("uart0", &uart_clk),
-	DEF_LOOKUP("apptimer", &app_timer_clk),
-	DEF_LOOKUP("keypad", &keypad_clk),
+	DEF_LOOKUP("slow",      &slow_clk),
+	DEF_LOOKUP("coh901327_wdog",      &wdog_clk),
+	DEF_LOOKUP("uart0",     &uart_clk),
+	DEF_LOOKUP("apptimer",  &app_timer_clk),
+	DEF_LOOKUP("coh901461-keypad",    &keypad_clk),
 	DEF_LOOKUP("u300-gpio", &gpio_clk),
-	DEF_LOOKUP("rtc0", &rtc_clk),
-	DEF_LOOKUP("bustr", &bustr_clk),
-	DEF_LOOKUP("evhist", &evhist_clk),
-	DEF_LOOKUP("timer", &timer_clk),
+	DEF_LOOKUP("rtc-coh901331",      &rtc_clk),
+	DEF_LOOKUP("bustr",     &bustr_clk),
+	DEF_LOOKUP("evhist",    &evhist_clk),
+	DEF_LOOKUP("timer",     &timer_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("ppm", &ppm_clk),
+	DEF_LOOKUP("ppm",       &ppm_clk),
 #endif
 };
 
@@ -1427,16 +1464,20 @@ static const struct file_operations u300_clocks_operations = {
 	.release	= single_release,
 };
 
-static void init_clk_read_procfs(void)
+static int __init init_clk_read_debugfs(void)
 {
 	/* Expose a simple debugfs interface to view all clocks */
 	(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
-				   NULL, NULL, &u300_clocks_operations);
-}
-#else
-static inline void init_clk_read_procfs(void)
-{
+				   NULL, NULL,
+				   &u300_clocks_operations);
+	return 0;
 }
+/*
+ * This needs to come in after the core_initcall() for the
+ * overall clocks, because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_clk_read_debugfs);
 #endif
 
 static int __init u300_clock_init(void)
@@ -1462,8 +1503,6 @@ static int __init u300_clock_init(void)
 
 	clk_register();
 
-	init_clk_read_procfs();
-
 	/*
 	 * Some of these may be on when we boot the system so make sure they
 	 * are turned OFF.
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 89b3ccf35e1..2e9b8ccd8ec 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -455,8 +455,8 @@ void __init u300_init_irq(void)
 	for (i = 0; i < NR_IRQS; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
 	u300_enable_intcon_clock();
-	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
-	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
 }
 
 
@@ -510,7 +510,7 @@ static struct db_chip db_chips[] __initdata = {
 	}
 };
 
-static void u300_init_check_chip(void)
+static void __init u300_init_check_chip(void)
 {
 
 	u16 val;
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 69214fc8bd1..31093af7d05 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -342,8 +342,7 @@ static struct platform_device versatile_i2c_device = {
 
 static struct i2c_board_info versatile_i2c_board_info[] = {
 	{
-		I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
-		.type = "ds1338",
+		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
 	},
 };
 
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 8277802ec85..3a7279c1ce5 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -120,6 +120,32 @@ void show_mem(void)
 	printk("%d pages swap cached\n", cached);
 }
 
+static void __init find_node_limits(int node, struct meminfo *mi,
+	unsigned long *min, unsigned long *max_low, unsigned long *max_high)
+{
+	int i;
+
+	*min = -1UL;
+	*max_low = *max_high = 0;
+
+	for_each_nodebank(i, mi, node) {
+		struct membank *bank = &mi->bank[i];
+		unsigned long start, end;
+
+		start = bank_pfn_start(bank);
+		end = bank_pfn_end(bank);
+
+		if (*min > start)
+			*min = start;
+		if (*max_high < end)
+			*max_high = end;
+		if (bank->highmem)
+			continue;
+		if (*max_low < end)
+			*max_low = end;
+	}
+}
+
 /*
  * FIXME: We really want to avoid allocating the bootmap bitmap
  * over the top of the initrd.  Hopefully, this is located towards
@@ -210,41 +236,25 @@ static inline void map_memory_bank(struct membank *bank)
 #endif
 }
 
-static unsigned long __init bootmem_init_node(int node, struct meminfo *mi)
+static void __init bootmem_init_node(int node, struct meminfo *mi,
+	unsigned long start_pfn, unsigned long end_pfn)
 {
-	unsigned long start_pfn, end_pfn, boot_pfn;
+	unsigned long boot_pfn;
 	unsigned int boot_pages;
 	pg_data_t *pgdat;
 	int i;
 
-	start_pfn = -1UL;
-	end_pfn = 0;
-
 	/*
-	 * Calculate the pfn range, and map the memory banks for this node.
+	 * Map the memory banks for this node.
 	 */
 	for_each_nodebank(i, mi, node) {
 		struct membank *bank = &mi->bank[i];
-		unsigned long start, end;
 
-		start = bank_pfn_start(bank);
-		end = bank_pfn_end(bank);
-
-		if (start_pfn > start)
-			start_pfn = start;
-		if (end_pfn < end)
-			end_pfn = end;
-
-		map_memory_bank(bank);
+		if (!bank->highmem)
+			map_memory_bank(bank);
 	}
 
 	/*
-	 * If there is no memory in this node, ignore it.
-	 */
-	if (end_pfn == 0)
-		return end_pfn;
-
-	/*
 	 * Allocate the bootmem bitmap page.
 	 */
 	boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
@@ -260,7 +270,8 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi)
 
 	for_each_nodebank(i, mi, node) {
 		struct membank *bank = &mi->bank[i];
-		free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
+		if (!bank->highmem)
+			free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
 		memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
 	}
 
@@ -269,8 +280,6 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi)
 	 */
 	reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
 			     boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
-
-	return end_pfn;
 }
 
 static void __init bootmem_reserve_initrd(int node)
@@ -297,33 +306,39 @@ static void __init bootmem_reserve_initrd(int node)
 static void __init bootmem_free_node(int node, struct meminfo *mi)
 {
 	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
-	unsigned long start_pfn, end_pfn;
-	pg_data_t *pgdat = NODE_DATA(node);
+	unsigned long min, max_low, max_high;
 	int i;
 
-	start_pfn = pgdat->bdata->node_min_pfn;
-	end_pfn = pgdat->bdata->node_low_pfn;
+	find_node_limits(node, mi, &min, &max_low, &max_high);
 
 	/*
 	 * initialise the zones within this node.
 	 */
 	memset(zone_size, 0, sizeof(zone_size));
-	memset(zhole_size, 0, sizeof(zhole_size));
 
 	/*
 	 * The size of this node has already been determined.  If we need
 	 * to do anything fancy with the allocation of this memory to the
 	 * zones, now is the time to do it.
 	 */
-	zone_size[0] = end_pfn - start_pfn;
+	zone_size[0] = max_low - min;
+#ifdef CONFIG_HIGHMEM
+	zone_size[ZONE_HIGHMEM] = max_high - max_low;
+#endif
 
 	/*
 	 * For each bank in this node, calculate the size of the holes.
 	 *  holes = node_size - sum(bank_sizes_in_node)
 	 */
-	zhole_size[0] = zone_size[0];
-	for_each_nodebank(i, mi, node)
-		zhole_size[0] -= bank_pfn_size(&mi->bank[i]);
+	memcpy(zhole_size, zone_size, sizeof(zhole_size));
+	for_each_nodebank(i, mi, node) {
+		int idx = 0;
+#ifdef CONFIG_HIGHMEM
+		if (mi->bank[i].highmem)
+			idx = ZONE_HIGHMEM;
+#endif
+		zhole_size[idx] -= bank_pfn_size(&mi->bank[i]);
+	}
 
 	/*
 	 * Adjust the sizes according to any special requirements for
@@ -331,13 +346,13 @@ static void __init bootmem_free_node(int node, struct meminfo *mi)
 	 */
 	arch_adjust_zones(node, zone_size, zhole_size);
 
-	free_area_init_node(node, zone_size, start_pfn, zhole_size);
+	free_area_init_node(node, zone_size, min, zhole_size);
 }
 
 void __init bootmem_init(void)
 {
 	struct meminfo *mi = &meminfo;
-	unsigned long memend_pfn = 0;
+	unsigned long min, max_low, max_high;
 	int node, initrd_node;
 
 	/*
@@ -345,11 +360,29 @@ void __init bootmem_init(void)
 	 */
 	initrd_node = check_initrd(mi);
 
+	max_low = max_high = 0;
+
 	/*
 	 * Run through each node initialising the bootmem allocator.
 	 */
 	for_each_node(node) {
-		unsigned long end_pfn = bootmem_init_node(node, mi);
+		unsigned long node_low, node_high;
+
+		find_node_limits(node, mi, &min, &node_low, &node_high);
+
+		if (node_low > max_low)
+			max_low = node_low;
+		if (node_high > max_high)
+			max_high = node_high;
+
+		/*
+		 * If there is no memory in this node, ignore it.
+		 * (We can't have nodes which have no lowmem)
+		 */
+		if (node_low == 0)
+			continue;
+
+		bootmem_init_node(node, mi, min, node_low);
 
 		/*
 		 * Reserve any special node zero regions.
@@ -362,12 +395,6 @@ void __init bootmem_init(void)
 		 */
 		if (node == initrd_node)
 			bootmem_reserve_initrd(node);
-
-		/*
-		 * Remember the highest memory PFN.
-		 */
-		if (end_pfn > memend_pfn)
-			memend_pfn = end_pfn;
 	}
 
 	/*
@@ -383,7 +410,7 @@ void __init bootmem_init(void)
 	for_each_node(node)
 		bootmem_free_node(node, mi);
 
-	high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1;
+	high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
 
 	/*
 	 * This doesn't seem to be used by the Linux memory manager any
@@ -393,7 +420,8 @@ void __init bootmem_init(void)
 	 * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
 	 * the system, not the maximum PFN.
 	 */
-	max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
+	max_low_pfn = max_low - PHYS_PFN_OFFSET;
+	max_pfn = max_high - PHYS_PFN_OFFSET;
 }
 
 static inline int free_area(unsigned long pfn, unsigned long end, char *s)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4722582b17b..4426ee67cec 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -687,13 +687,19 @@ __early_param("vmalloc=", early_vmalloc);
 
 static void __init sanity_check_meminfo(void)
 {
-	int i, j;
+	int i, j, highmem = 0;
 
 	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
 		struct membank *bank = &meminfo.bank[j];
 		*bank = meminfo.bank[i];
 
 #ifdef CONFIG_HIGHMEM
+		if (__va(bank->start) > VMALLOC_MIN ||
+		    __va(bank->start) < (void *)PAGE_OFFSET)
+			highmem = 1;
+
+		bank->highmem = highmem;
+
 		/*
 		 * Split those memory banks which are partially overlapping
 		 * the vmalloc area greatly simplifying things later.
@@ -714,6 +720,7 @@ static void __init sanity_check_meminfo(void)
 				i++;
 				bank[1].size -= VMALLOC_MIN - __va(bank->start);
 				bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
+				bank[1].highmem = highmem = 1;
 				j++;
 			}
 			bank->size = VMALLOC_MIN - __va(bank->start);
diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c
index 195e48edd8c..ac5c80062b7 100644
--- a/arch/arm/mm/proc-syms.c
+++ b/arch/arm/mm/proc-syms.c
@@ -27,6 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all);
 EXPORT_SYMBOL(__cpuc_flush_user_all);
 EXPORT_SYMBOL(__cpuc_flush_user_range);
 EXPORT_SYMBOL(__cpuc_coherent_kern_range);
+EXPORT_SYMBOL(__cpuc_flush_dcache_page);
 EXPORT_SYMBOL(dmac_inv_range);  /* because of flush_ioremap_region() */
 #else
 EXPORT_SYMBOL(cpu_cache);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 27f8d1b2bc6..2eb182f7387 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -602,6 +602,8 @@ enum iomux_pins {
 #define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSPI2_SS2__I2C3_SDA	IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI2_SCLK__I2C3_SCL	IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 843e8af6406..1868c0d8f9b 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -78,10 +78,10 @@ static int omap_target(struct cpufreq_policy *policy,
 
 	/* Ensure desired rate is within allowed range.  Some govenors
 	 * (ondemand) will just pass target_freq=0 to get the minimum. */
-	if (target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-	if (target_freq > policy->cpuinfo.max_freq)
-		target_freq = policy->cpuinfo.max_freq;
+	if (target_freq < policy->min)
+		target_freq = policy->min;
+	if (target_freq > policy->max)
+		target_freq = policy->max;
 
 	freqs.old = omap_getspeed(0);
 	freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index def14ec265b..e3ac94f0900 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -946,7 +946,9 @@ void omap_start_dma(int lch)
 
 			cur_lch = next_lch;
 		} while (next_lch != -1);
-	} else if (cpu_class_is_omap2()) {
+	} else if (cpu_is_omap242x() ||
+		(cpu_is_omap243x() &&  omap_type() <= OMAP2430_REV_ES1_0)) {
+
 		/* Errata: Need to write lch even if not using chaining */
 		dma_write(lch, CLNK_CTRL(lch));
 	}
@@ -2457,6 +2459,19 @@ static int __init omap_init_dma(void)
 		setup_irq(irq, &omap24xx_dma_irq);
 	}
 
+	/* Enable smartidle idlemodes and autoidle */
+	if (cpu_is_omap34xx()) {
+		u32 v = dma_read(OCP_SYSCONFIG);
+		v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
+				DMA_SYSCONFIG_SIDLEMODE_MASK |
+				DMA_SYSCONFIG_AUTOIDLE);
+		v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+			DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+			DMA_SYSCONFIG_AUTOIDLE);
+		dma_write(v , OCP_SYSCONFIG);
+	}
+
+
 	/* FIXME: Update LCD DMA to work on 24xx */
 	if (cpu_class_is_omap1()) {
 		r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7fd89ba8d3b..9298bc0ab17 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -476,14 +476,12 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 	__raw_writel(l, reg);
 }
 
-static int __omap_get_gpio_datain(int gpio)
+static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 {
-	struct gpio_bank *bank;
 	void __iomem *reg;
 
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
-	bank = get_gpio_bank(gpio);
 	reg = bank->base;
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
@@ -524,6 +522,53 @@ static int __omap_get_gpio_datain(int gpio)
 			& (1 << get_gpio_index(gpio))) != 0;
 }
 
+static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+{
+	void __iomem *reg;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+	reg = bank->base;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DATAOUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
+	case METHOD_GPIO_730:
+		reg += OMAP730_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+		defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_DATAOUT;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+}
+
 #define MOD_REG_BIT(reg, bit_mask, set)	\
 do {	\
 	int l = __raw_readl(base + reg); \
@@ -1189,6 +1234,7 @@ static void gpio_mask_irq(unsigned int irq)
 	struct gpio_bank *bank = get_irq_chip_data(irq);
 
 	_set_gpio_irqenable(bank, gpio, 0);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 }
 
 static void gpio_unmask_irq(unsigned int irq)
@@ -1196,6 +1242,11 @@ static void gpio_unmask_irq(unsigned int irq)
 	unsigned int gpio = irq - IH_GPIO_BASE;
 	struct gpio_bank *bank = get_irq_chip_data(irq);
 	unsigned int irq_mask = 1 << get_gpio_index(gpio);
+	struct irq_desc *desc = irq_to_desc(irq);
+	u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK;
+
+	if (trigger)
+		_set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
 
 	/* For level-triggered GPIOs, the clearing must be done after
 	 * the HW source is cleared, thus after the handler has run */
@@ -1350,9 +1401,49 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset)
 	return 0;
 }
 
+static int gpio_is_input(struct gpio_bank *bank, int mask)
+{
+	void __iomem *reg = bank->base;
+
+	switch (bank->method) {
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_IO_CNTL;
+		break;
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DIRECTION;
+		break;
+	case METHOD_GPIO_730:
+		reg += OMAP730_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_OE;
+		break;
+	}
+	return __raw_readl(reg) & mask;
+}
+
 static int gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return __omap_get_gpio_datain(chip->base + offset);
+	struct gpio_bank *bank;
+	void __iomem *reg;
+	int gpio;
+	u32 mask;
+
+	gpio = chip->base + offset;
+	bank = get_gpio_bank(gpio);
+	reg = bank->base;
+	mask = 1 << get_gpio_index(gpio);
+
+	if (gpio_is_input(bank, mask))
+		return _get_gpio_datain(bank, gpio);
+	else
+		return _get_gpio_dataout(bank, gpio);
 }
 
 static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
@@ -1585,6 +1676,7 @@ static int __init _omap_gpio_init(void)
 			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
 			__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
 			__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
+			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN);
 
 			/* Initialize interface clock ungated, module enabled */
 			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
@@ -1885,34 +1977,6 @@ arch_initcall(omap_gpio_sysinit);
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 
-static int gpio_is_input(struct gpio_bank *bank, int mask)
-{
-	void __iomem *reg = bank->base;
-
-	switch (bank->method) {
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_IO_CNTL;
-		break;
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DIRECTION;
-		break;
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_OE;
-		break;
-	}
-	return __raw_readl(reg) & mask;
-}
-
-
 static int dbg_gpio_show(struct seq_file *s, void *unused)
 {
 	unsigned	i, j, gpio;
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index f9f65e1ba3f..4b8b0d65cbf 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -20,6 +20,8 @@ struct clockdomain;
 struct clkops {
 	int			(*enable)(struct clk *);
 	void			(*disable)(struct clk *);
+	void			(*find_idlest)(struct clk *, void __iomem **, u8 *);
+	void			(*find_companion)(struct clk *, void __iomem **, u8 *);
 };
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index fc60c4ebcc2..11e73d9e892 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -30,6 +30,17 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
 
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST		0
+#define OMAP2_DEVICE_TYPE_EMU		1
+#define OMAP2_DEVICE_TYPE_SEC		2
+#define OMAP2_DEVICE_TYPE_GP		3
+#define OMAP2_DEVICE_TYPE_BAD		4
+
+int omap_type(void);
+
 struct omap_chip_id {
 	u8 oc;
 	u8 type;
@@ -367,9 +378,6 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
 				cpu_is_omap44xx())
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-			defined(CONFIG_ARCH_OMAP4)
-
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
 #define OMAP2420_REV_ES1_0	0x24200024
@@ -424,17 +432,4 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 
 int omap_chip_is(struct omap_chip_id oci);
-int omap_type(void);
-
-/*
- * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST		0
-#define OMAP2_DEVICE_TYPE_EMU		1
-#define OMAP2_DEVICE_TYPE_SEC		2
-#define OMAP2_DEVICE_TYPE_GP		3
-#define OMAP2_DEVICE_TYPE_BAD		4
-
 void omap2_check_revision(void);
-
-#endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 8c1eae88737..7b939cc0196 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -389,6 +389,21 @@
 #define DMA_THREAD_FIFO_25		(0x02 << 14)
 #define DMA_THREAD_FIFO_50		(0x03 << 14)
 
+/* DMA4_OCP_SYSCONFIG bits */
+#define DMA_SYSCONFIG_MIDLEMODE_MASK		(3 << 12)
+#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK	(3 << 8)
+#define DMA_SYSCONFIG_EMUFREE			(1 << 5)
+#define DMA_SYSCONFIG_SIDLEMODE_MASK		(3 << 3)
+#define DMA_SYSCONFIG_SOFTRESET			(1 << 2)
+#define DMA_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define DMA_SYSCONFIG_MIDLEMODE(n)		((n) << 12)
+#define DMA_SYSCONFIG_SIDLEMODE(n)		((n) << 3)
+
+#define DMA_IDLEMODE_SMARTIDLE			0x2
+#define DMA_IDLEMODE_NO_IDLE			0x1
+#define DMA_IDLEMODE_FORCE_IDLE			0x0
+
 /* Chaining modes*/
 #ifndef CONFIG_ARCH_OMAP1
 #define OMAP_DMA_STATIC_CHAIN		0x1
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 3b281472056..21fb0efdda8 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -201,7 +201,7 @@
 #define OMAP2_IO_ADDRESS(pa)	IOMEM(__OMAP2_IO_ADDRESS(pa))
 
 #ifdef __ASSEMBLER__
-#define IOMEM(x)		x
+#define IOMEM(x)		(x)
 #else
 #define IOMEM(x)		((void __force __iomem *)(x))
 
@@ -228,7 +228,8 @@ extern void omap1_map_common_io(void);
 extern void omap1_init_common_hw(void);
 
 extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(struct omap_sdrc_params *sp);
+extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
+				 struct omap_sdrc_params *sdrc_cs1);
 
 #define __arch_ioremap(p,s,t)	omap_ioremap(p,s,t)
 #define __arch_iounmap(v)	omap_iounmap(v)
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 85a62170576..80281c458ba 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -853,6 +853,10 @@ enum omap34xx_index {
 	AE5_34XX_GPIO143,
 	H19_34XX_GPIO164_OUT,
 	J25_34XX_GPIO170,
+
+	/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
+	H16_34XX_SDRC_CKE0,
+	H17_34XX_SDRC_CKE1,
 };
 
 struct omap_mux_cfg {
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
index 24ac3c71591..cda2a70397b 100644
--- a/arch/arm/plat-omap/include/mach/prcm.h
+++ b/arch/arm/plat-omap/include/mach/prcm.h
@@ -25,6 +25,7 @@
 
 u32 omap_prcm_get_reset_sources(void);
 void omap_prcm_arch_reset(char mode);
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index adc73522491..0be18e4ff18 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -30,6 +30,10 @@
 #define SDRC_ACTIM_CTRL_A_0	0x09c
 #define SDRC_ACTIM_CTRL_B_0	0x0a0
 #define SDRC_RFR_CTRL_0		0x0a4
+#define SDRC_MR_1		0x0B4
+#define SDRC_ACTIM_CTRL_A_1	0x0C4
+#define SDRC_ACTIM_CTRL_B_1	0x0C8
+#define SDRC_RFR_CTRL_1		0x0D4
 
 /*
  * These values represent the number of memory clock cycles between
@@ -102,8 +106,11 @@ struct omap_sdrc_params {
 	u32 mr;
 };
 
-void __init omap2_sdrc_init(struct omap_sdrc_params *sp);
-struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r);
+void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+			    struct omap_sdrc_params *sdrc_cs1);
+int omap2_sdrc_get_params(unsigned long r,
+			  struct omap_sdrc_params **sdrc_cs0,
+			  struct omap_sdrc_params **sdrc_cs1);
 
 #ifdef CONFIG_ARCH_OMAP2
 
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 13abd02d152..def0529c75e 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -59,6 +59,7 @@ extern void omap_uart_check_wakeup(void);
 extern void omap_uart_prepare_suspend(void);
 extern void omap_uart_prepare_idle(int num);
 extern void omap_uart_resume_idle(int num);
+extern void omap_uart_enable_irqs(int enable);
 #endif
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index 4d53cc59d7a..8974e3fc269 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -21,11 +21,12 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 				      u32 mem_type);
 extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
-extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
-				     u32 sdrc_actim_ctrla,
-				     u32 sdrc_actim_ctrlb, u32 m2,
-				     u32 unlock_dll, u32 f, u32 sdrc_mr,
-				     u32 inc);
+extern u32 omap3_configure_core_dpll(
+			u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
 
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -59,12 +60,12 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 						u32 mem_type);
 extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 
-
-extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
-					  u32 sdrc_actim_ctrla,
-					  u32 sdrc_actim_ctrlb, u32 m2,
-					  u32 unlock_dll, u32 f, u32 sdrc_mr,
-					  u32 inc);
+extern u32 omap3_sram_configure_core_dpll(
+			u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
 extern unsigned long omap3_sram_configure_core_dpll_sz;
 
 #endif
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4cf449fa2cb..4a030139901 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -298,7 +298,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da)
 		if ((start <= da) && (da < start + bytes)) {
 			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
 				__func__, start, da, bytes);
-
+			iotlb_load_cr(obj, &cr);
 			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
 		}
 	}
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 65006df3f1b..5eae7876979 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -44,9 +44,9 @@
 #define OMAP2_SRAM_VA		0xe3000000
 #define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
 #define OMAP3_SRAM_PA           0x40200000
-#define OMAP3_SRAM_VA           0xd7000000
+#define OMAP3_SRAM_VA           0xe3000000
 #define OMAP3_SRAM_PUB_PA       0x40208000
-#define OMAP3_SRAM_PUB_VA       0xd7008000
+#define OMAP3_SRAM_PUB_VA       (OMAP3_SRAM_VA + 0x8000)
 #define OMAP4_SRAM_PA		0x40200000		/*0x402f0000*/
 #define OMAP4_SRAM_VA		0xd7000000		/*0xd70f0000*/
 
@@ -133,7 +133,12 @@ void __init omap_detect_sram(void)
 			if (cpu_is_omap34xx()) {
 				omap_sram_base = OMAP3_SRAM_PUB_VA;
 				omap_sram_start = OMAP3_SRAM_PUB_PA;
-				omap_sram_size = 0x8000; /* 32K */
+				if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+				    (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+					omap_sram_size = 0x7000; /* 28K */
+				} else {
+					omap_sram_size = 0x8000; /* 32K */
+				}
 			} else {
 				omap_sram_base = OMAP2_SRAM_PUB_VA;
 				omap_sram_start = OMAP2_SRAM_PUB_PA;
@@ -368,20 +373,26 @@ static inline int omap243x_sram_init(void)
 
 #ifdef CONFIG_ARCH_OMAP3
 
-static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
-					      u32 sdrc_actim_ctrla,
-					      u32 sdrc_actim_ctrlb,
-					      u32 m2, u32 unlock_dll,
-					      u32 f, u32 sdrc_mr, u32 inc);
-u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
-			      u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll,
-			      u32 f, u32 sdrc_mr, u32 inc)
+static u32 (*_omap3_sram_configure_core_dpll)(
+			u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+
+u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
 {
 	BUG_ON(!_omap3_sram_configure_core_dpll);
-	return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
-					       sdrc_actim_ctrla,
-					       sdrc_actim_ctrlb, m2,
-					       unlock_dll, f, sdrc_mr, inc);
+	return _omap3_sram_configure_core_dpll(
+			m2, unlock_dll, f, inc,
+			sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
+			sdrc_actim_ctrl_b_0, sdrc_mr_0,
+			sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
+			sdrc_actim_ctrl_b_1, sdrc_mr_1);
 }
 
 /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 9646a94ed3d..07c430fdc9e 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -11,6 +11,8 @@
 #ifndef __PLAT_GPIO_H
 #define __PLAT_GPIO_H
 
+#include <linux/init.h>
+
 /*
  * GENERIC_GPIO primitives.
  */
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
index abc79d44aca..98548c6903a 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/arch/arm/plat-pxa/gpio.c
@@ -16,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
-#include <linux/bootmem.h>
+#include <linux/slab.h>
 
 #include <mach/gpio.h>
 
@@ -112,17 +112,12 @@ static int __init pxa_init_gpio_chip(int gpio_end)
 	int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
 	struct pxa_gpio_chip *chips;
 
-	/* this is early, we have to use bootmem allocator, and we really
-	 * want this to be allocated dynamically for different 'gpio_end'
-	 */
-	chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
+	chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
 	if (chips == NULL) {
 		pr_err("%s: failed to allocate GPIO chips\n", __func__);
 		return -ENOMEM;
 	}
 
-	memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
-
 	for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
 		struct gpio_chip *c = &chips[i].chip;
 
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 935c7558469..bae4b955edf 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -166,6 +166,11 @@ config S3C_DMA
 	help
 	  Internal configuration for S3C DMA core
 
+config S3C_PWM
+	bool
+	help
+	  PWM timer code for the S3C2410, and similar processors
+
 # device definitions to compile in
 
 config S3C_DEV_HSMMC
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 74bb7cb5da4..4d8e4a35d34 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -34,7 +34,8 @@ obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
-obj-$(CONFIG_SND_S3C24XX_SOC)	+= dev-audio.o
+obj-$(CONFIG_SND_S3C64XX_SOC_I2S)	+= dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
+obj-$(CONFIG_S3C_PWM)		+= pwm.o
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index b5b9c4d46e9..41773808040 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -37,6 +37,7 @@ extern struct platform_device s3c_device_i2c1;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_iis;
 extern struct platform_device s3c_device_hwmon;
 extern struct platform_device s3c_device_hsmmc0;
 extern struct platform_device s3c_device_hsmmc1;
@@ -50,6 +51,8 @@ extern struct platform_device s3c_device_nand;
 extern struct platform_device s3c_device_usbgadget;
 extern struct platform_device s3c_device_usb_hsotg;
 
+extern struct platform_device s3c_device_ts;
+
 /* s3c2440 specific devices */
 
 #ifdef CONFIG_CPU_S3C2440
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
index 18f958801e6..723ab032059 100644
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ b/arch/arm/plat-s3c/include/plat/nand.h
@@ -47,6 +47,7 @@ struct s3c2410_platform_nand {
 	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
 
 	unsigned int	ignore_unset_ecc:1;
+	unsigned int	software_ecc:1; /* force software ecc at runtime */
 
 	int			nr_sets;
 	struct s3c2410_nand_set *sets;
diff --git a/arch/arm/plat-s3c/include/plat/pwm.h b/arch/arm/plat-s3c/include/plat/pwm.h
new file mode 100644
index 00000000000..6a41b0ad840
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/pwm.h
@@ -0,0 +1,45 @@
+#ifndef __S3C2410_PWM_H
+#define __S3C2410_PWM_H
+
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <mach/io.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <plat/regs-timer.h>
+
+enum pwm_timer {
+	PWM0,
+	PWM1,
+	PWM2,
+	PWM3,
+	PWM4
+};
+
+struct s3c2410_pwm {
+	enum pwm_timer timerid;
+	struct clk *pclk;
+	unsigned long pclk_rate;
+	unsigned long prescaler;
+	unsigned long divider;
+	unsigned long counter;
+	unsigned long comparer;
+};
+
+struct s3c24xx_pwm_platform_data{
+        /* callback to attach platform children (to enforce suspend / resume
+         * ordering */
+        void (*attach_child_devices)(struct device *parent_device);
+};
+
+int s3c2410_pwm_init(struct s3c2410_pwm *s3c2410_pwm);
+int s3c2410_pwm_enable(struct s3c2410_pwm *s3c2410_pwm);
+int s3c2410_pwm_disable(struct s3c2410_pwm *s3c2410_pwm);
+int s3c2410_pwm_start(struct s3c2410_pwm *s3c2410_pwm);
+int s3c2410_pwm_stop(struct s3c2410_pwm *s3c2410_pwm);
+int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *s3c2410_pwm);
+int s3c2410_pwm_dumpregs(void);
+
+#endif /* __S3C2410_PWM_H */
diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c
new file mode 100644
index 00000000000..250bd2bc9b8
--- /dev/null
+++ b/arch/arm/plat-s3c/pwm.c
@@ -0,0 +1,288 @@
+/*
+ * arch/arm/plat-s3c/pwm.c
+ *
+ * Copyright (c) by Javi Roman <javiroman@kernel-labs.org>
+ * 		 for the Openmoko Project.
+ *
+ *     S3C2410A SoC PWM support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <mach/hardware.h>
+#include <plat/regs-timer.h>
+#include <plat/pwm.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_PM
+	static unsigned long standby_reg_tcon;
+	static unsigned long standby_reg_tcfg0;
+	static unsigned long standby_reg_tcfg1;
+#endif
+
+int s3c2410_pwm_disable(struct s3c2410_pwm *pwm)
+{
+	unsigned long tcon;
+
+	/* stop timer */
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon &= 0xffffff00;
+	__raw_writel(tcon, S3C2410_TCON);
+
+	clk_disable(pwm->pclk);
+	clk_put(pwm->pclk);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c2410_pwm_disable);
+
+int s3c2410_pwm_init(struct s3c2410_pwm *pwm)
+{
+	pwm->pclk = clk_get(NULL, "timers");
+	if (IS_ERR(pwm->pclk))
+		return PTR_ERR(pwm->pclk);
+
+	clk_enable(pwm->pclk);
+	pwm->pclk_rate = clk_get_rate(pwm->pclk);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c2410_pwm_init);
+
+int s3c2410_pwm_enable(struct s3c2410_pwm *pwm)
+{
+	unsigned long tcfg0, tcfg1, tcnt, tcmp;
+
+	/* control registers bits */
+	tcfg1 = __raw_readl(S3C2410_TCFG1);
+	tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+	/* divider & scaler slection */
+	switch (pwm->timerid) {
+	case PWM0:
+		tcfg1 &= ~S3C2410_TCFG1_MUX0_MASK;
+		tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
+		break;
+	case PWM1:
+		tcfg1 &= ~S3C2410_TCFG1_MUX1_MASK;
+		tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
+		break;
+	case PWM2:
+		tcfg1 &= ~S3C2410_TCFG1_MUX2_MASK;
+		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
+		break;
+	case PWM3:
+		tcfg1 &= ~S3C2410_TCFG1_MUX3_MASK;
+		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
+		break;
+	case PWM4:
+		/* timer four is not capable of doing PWM */
+		break;
+	default:
+		clk_disable(pwm->pclk);
+		clk_put(pwm->pclk);
+		return -1;
+	}
+
+	/* divider & scaler values */
+	tcfg1 |= pwm->divider;
+	__raw_writel(tcfg1, S3C2410_TCFG1);
+
+	switch (pwm->timerid) {
+	case PWM0:
+	case PWM1:
+		tcfg0 |= pwm->prescaler;
+		__raw_writel(tcfg0, S3C2410_TCFG0);
+		break;
+	default:
+		if ((tcfg0 | pwm->prescaler) != tcfg0) {
+			printk(KERN_WARNING "not changing prescaler of PWM %u,"
+			       " since it's shared with timer4 (clock tick)\n",
+			       pwm->timerid);
+		}
+		break;
+	}
+
+	/* timer count and compare buffer initial values */
+	tcnt = pwm->counter;
+	tcmp = pwm->comparer;
+
+	__raw_writel(tcnt, S3C2410_TCNTB(pwm->timerid));
+	__raw_writel(tcmp, S3C2410_TCMPB(pwm->timerid));
+
+	/* ensure timer is stopped */
+	s3c2410_pwm_stop(pwm);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c2410_pwm_enable);
+
+int s3c2410_pwm_start(struct s3c2410_pwm *pwm)
+{
+	unsigned long tcon;
+
+	tcon = __raw_readl(S3C2410_TCON);
+
+	switch (pwm->timerid) {
+	case PWM0:
+		tcon |= S3C2410_TCON_T0START;
+		tcon &= ~S3C2410_TCON_T0MANUALUPD;
+		break;
+	case PWM1:
+		tcon |= S3C2410_TCON_T1START;
+		tcon &= ~S3C2410_TCON_T1MANUALUPD;
+		break;
+	case PWM2:
+		tcon |= S3C2410_TCON_T2START;
+		tcon &= ~S3C2410_TCON_T2MANUALUPD;
+		break;
+	case PWM3:
+		tcon |= S3C2410_TCON_T3START;
+		tcon &= ~S3C2410_TCON_T3MANUALUPD;
+		break;
+	case PWM4:
+		/* timer four is not capable of doing PWM */
+	default:
+		return -ENODEV;
+	}
+
+	__raw_writel(tcon, S3C2410_TCON);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c2410_pwm_start);
+
+int s3c2410_pwm_stop(struct s3c2410_pwm *pwm)
+{
+	unsigned long tcon;
+
+	tcon = __raw_readl(S3C2410_TCON);
+
+	switch (pwm->timerid) {
+	case PWM0:
+		tcon &= ~0x00000000;
+		tcon |= S3C2410_TCON_T0RELOAD;
+		tcon |= S3C2410_TCON_T0MANUALUPD;
+		break;
+	case PWM1:
+		tcon &= ~0x00000080;
+		tcon |= S3C2410_TCON_T1RELOAD;
+		tcon |= S3C2410_TCON_T1MANUALUPD;
+		break;
+	case PWM2:
+		tcon &= ~0x00000800;
+		tcon |= S3C2410_TCON_T2RELOAD;
+		tcon |= S3C2410_TCON_T2MANUALUPD;
+		break;
+	case PWM3:
+		tcon &= ~0x00008000;
+		tcon |= S3C2410_TCON_T3RELOAD;
+		tcon |= S3C2410_TCON_T3MANUALUPD;
+		break;
+	case PWM4:
+		/* timer four is not capable of doing PWM */
+	default:
+		return -ENODEV;
+	}
+
+	__raw_writel(tcon, S3C2410_TCON);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c2410_pwm_stop);
+
+int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *pwm)
+{
+	__raw_writel(reg_value, S3C2410_TCMPB(pwm->timerid));
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c2410_pwm_duty_cycle);
+
+int s3c2410_pwm_dumpregs(void)
+{
+	printk(KERN_INFO "TCON: %08lx, TCFG0: %08lx, TCFG1: %08lx\n",
+			(unsigned long)	__raw_readl(S3C2410_TCON),
+			(unsigned long)	__raw_readl(S3C2410_TCFG0),
+			(unsigned long)	__raw_readl(S3C2410_TCFG1));
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c2410_pwm_dumpregs);
+
+static int __init s3c24xx_pwm_probe(struct platform_device *pdev)
+{
+	struct s3c24xx_pwm_platform_data *pdata = pdev->dev.platform_data;
+
+	dev_info(&pdev->dev, "s3c24xx_pwm is registered \n");
+
+	/* if platform was interested, give him a chance to register
+	 * platform devices that switch power with us as the parent
+	 * at registration time -- ensures suspend / resume ordering
+	 */
+	if (pdata)
+		if (pdata->attach_child_devices)
+			(pdata->attach_child_devices)(&pdev->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c24xx_pwm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	/* PWM config should be kept in suspending */
+	standby_reg_tcon = __raw_readl(S3C2410_TCON);
+	standby_reg_tcfg0 = __raw_readl(S3C2410_TCFG0);
+	standby_reg_tcfg1 = __raw_readl(S3C2410_TCFG1);
+
+	return 0;
+}
+
+static int s3c24xx_pwm_resume(struct platform_device *pdev)
+{
+	__raw_writel(standby_reg_tcon, S3C2410_TCON);
+	__raw_writel(standby_reg_tcfg0, S3C2410_TCFG0);
+	__raw_writel(standby_reg_tcfg1, S3C2410_TCFG1);
+
+	return 0;
+}
+#else
+#define s3c24xx_pwm_suspend	NULL
+#define s3c24xx_pwm_resume	NULL
+#endif
+
+static struct platform_driver s3c24xx_pwm_driver = {
+	.driver = {
+		.name	= "s3c24xx_pwm",
+		.owner	= THIS_MODULE,
+	},
+	.probe	 = s3c24xx_pwm_probe,
+	.suspend = s3c24xx_pwm_suspend,
+	.resume	 = s3c24xx_pwm_resume,
+};
+
+static int __init s3c24xx_pwm_init(void)
+{
+	return platform_driver_register(&s3c24xx_pwm_driver);
+}
+
+static void __exit s3c24xx_pwm_exit(void)
+{
+}
+
+MODULE_AUTHOR("Javi Roman <javiroman@kernel-labs.org>");
+MODULE_LICENSE("GPL");
+
+module_init(s3c24xx_pwm_init);
+module_exit(s3c24xx_pwm_exit);
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 636cb12711d..579a165c282 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_HAVE_PWM)		+= pwm.o
+obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index ee1baf11ad9..9cff2320e11 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -43,6 +43,7 @@ struct s3c_adc_client {
 	unsigned int		 nr_samples;
 	unsigned char		 is_ts;
 	unsigned char		 channel;
+	unsigned int		 selected;
 
 	void	(*select_cb)(unsigned selected);
 	void	(*convert_cb)(unsigned val1, unsigned val2,
@@ -58,20 +59,31 @@ struct adc_device {
 	void __iomem		*regs;
 
 	unsigned int		 prescale;
+	unsigned int		 delay;
 
 	int			 irq;
 };
 
 static struct adc_device *adc_dev;
 
+static struct work_struct resume_work;
+
 static LIST_HEAD(adc_pending);
 
 #define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
 
+#define AUTOPST	(S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | \
+		S3C2410_ADCTSC_XP_SEN | S3C2410_ADCTSC_AUTO_PST | \
+		S3C2410_ADCTSC_XY_PST(0))
+
 static inline void s3c_adc_convert(struct adc_device *adc)
 {
 	unsigned con = readl(adc->regs + S3C2410_ADCCON);
 
+	if (adc->cur->is_ts)
+		writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST,
+		       adc->regs + S3C2410_ADCTSC);
+
 	con |= S3C2410_ADCCON_ENABLE_START;
 	writel(con, adc->regs + S3C2410_ADCCON);
 }
@@ -81,7 +93,10 @@ static inline void s3c_adc_select(struct adc_device *adc,
 {
 	unsigned con = readl(adc->regs + S3C2410_ADCCON);
 
-	client->select_cb(1);
+	if (!client->selected) {
+		client->selected = 1;
+		client->select_cb(1);
+	}
 
 	con &= ~S3C2410_ADCCON_MUXMASK;
 	con &= ~S3C2410_ADCCON_STDBM;
@@ -105,12 +120,9 @@ static void s3c_adc_try(struct adc_device *adc)
 {
 	struct s3c_adc_client *next = adc->ts_pend;
 
-	if (!next && !list_empty(&adc_pending)) {
+	if (!next && !list_empty(&adc_pending))
 		next = list_first_entry(&adc_pending,
 					struct s3c_adc_client, pend);
-		list_del(&next->pend);
-	} else
-		adc->ts_pend = NULL;
 
 	if (next) {
 		adc_dbg(adc, "new client is %p\n", next);
@@ -234,14 +246,20 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 
 	if (client->nr_samples > 0) {
 		/* fire another conversion for this */
-
+		client->selected = 1;
 		client->select_cb(1);
 		s3c_adc_convert(adc);
 	} else {
 		local_irq_save(flags);
-		(client->select_cb)(0);
+		client->selected = 0;
+		if (!adc->cur->is_ts)
+			list_del(&adc->cur->pend);
+		else
+			adc->ts_pend = NULL;
 		adc->cur = NULL;
 
+		(client->select_cb)(0);
+
 		s3c_adc_try(adc);
 		local_irq_restore(flags);
 	}
@@ -264,6 +282,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
 
 	adc->pdev = pdev;
 	adc->prescale = S3C2410_ADCCON_PRSCVL(49);
+	adc->delay = 0x2710;
 
 	adc->irq = platform_get_irq(pdev, 1);
 	if (adc->irq <= 0) {
@@ -303,6 +322,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
 
 	writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
 	       adc->regs + S3C2410_ADCCON);
+	writel(adc->delay, adc->regs + S3C2410_ADCDLY);
 
 	dev_info(dev, "attached adc driver\n");
 
@@ -346,18 +366,42 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
 	writel(con, adc->regs + S3C2410_ADCCON);
 
 	clk_disable(adc->clk);
+	disable_irq(IRQ_ADC);
+	if (!list_empty(&adc_pending) || adc->ts_pend)
+		dev_info(&pdev->dev, "We still have adc clients pending\n");
 
 	return 0;
 }
 
+/* It seems this is not needed. This is under upstream review now. */
+static void adc_resume_work(struct work_struct *work)
+{
+	if (!adc_dev) /* Have no ADC here */
+		return;
+
+	if (!list_empty(&adc_pending) || adc_dev->ts_pend)
+		/* We still have adc clients pending */
+		s3c_adc_try(adc_dev);
+}
+
 static int s3c_adc_resume(struct platform_device *pdev)
 {
 	struct adc_device *adc = platform_get_drvdata(pdev);
 
+	enable_irq(IRQ_ADC);
 	clk_enable(adc->clk);
 
 	writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
 	       adc->regs + S3C2410_ADCCON);
+	writel(adc->delay, adc->regs + S3C2410_ADCDLY);
+
+	/* Schedule task if there are clients pending. */
+	if (!list_empty(&adc_pending) || adc_dev->ts_pend) {
+		INIT_WORK(&resume_work, adc_resume_work);
+		if (!schedule_work(&resume_work))
+			dev_err(&pdev->dev,
+				"Failed to schedule adc_resume work!\n");
+	}
 
 	return 0;
 }
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index 5b75a797b5a..0afb217a775 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -129,7 +129,7 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
 
 	/* calculate the MISCCR setting for the clock */
 
-	if (parent == &clk_xtal)
+	if (parent == &clk_mpll)
 		source = S3C2410_MISCCR_CLK0_MPLL;
 	else if (parent == &clk_upll)
 		source = S3C2410_MISCCR_CLK0_UPLL;
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 1932b7e0da1..ed4c19fa196 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -61,6 +61,7 @@ static const char name_s3c2410[]  = "S3C2410";
 static const char name_s3c2412[]  = "S3C2412";
 static const char name_s3c2440[]  = "S3C2440";
 static const char name_s3c2442[]  = "S3C2442";
+static const char name_s3c2442b[]  = "S3C2442B";
 static const char name_s3c2443[]  = "S3C2443";
 static const char name_s3c2410a[] = "S3C2410A";
 static const char name_s3c2440a[] = "S3C2440A";
@@ -112,6 +113,15 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.name		= name_s3c2442
 	},
 	{
+		.idcode		= 0x32440aab,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c244x_map_io,
+		.init_clocks	= s3c244x_init_clocks,
+		.init_uarts	= s3c244x_init_uarts,
+		.init		= s3c2442_init,
+		.name		= name_s3c2442b
+	},
+	{
 		.idcode		= 0x32412001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2412_map_io,
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..a89286b4a12 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -28,6 +28,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
+#include <mach/ts.h>
+
 #include <plat/regs-serial.h>
 #include <plat/udc.h>
 
@@ -199,6 +201,24 @@ struct platform_device s3c_device_nand = {
 
 EXPORT_SYMBOL(s3c_device_nand);
 
+/* Touchscreen */
+
+struct platform_device s3c_device_ts = {
+	.name		= "s3c2410-ts",
+	.id		= -1,
+	.dev.parent	= &s3c_device_adc.dev,
+};
+
+static struct s3c2410_ts_mach_info s3c2410ts_info;
+
+void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
+{
+	memcpy(&s3c2410ts_info, hard_s3c2410ts_info,
+		sizeof(struct s3c2410_ts_mach_info));
+	s3c_device_ts.dev.platform_data = &s3c2410ts_info;
+}
+EXPORT_SYMBOL(set_s3c2410ts_info);
+
 /* USB Device (Gadget)*/
 
 static struct resource s3c_usbgadget_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 6d7a961d326..c2dd900660b 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -26,6 +26,7 @@
 #include <plat/pm.h>
 
 #include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
 
 static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
 {
@@ -160,8 +161,16 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 			.label			= "GPIOH",
 			.ngpio			= 11,
 		},
-	},
-};
+	}, {
+		.base	= S3C2440_GPJCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2440_GPJ0,
+			.owner			= THIS_MODULE,
+			.label			= "GPIOJ",
+			.ngpio			= 11,
+		},
+	},};
 
 static __init int s3c24xx_gpiolib_init(void)
 {
diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h
index 69e1be8bec3..11a866466d8 100644
--- a/arch/arm/plat-s3c24xx/include/plat/irq.h
+++ b/arch/arm/plat-s3c24xx/include/plat/irq.h
@@ -12,6 +12,7 @@
 
 #include <linux/io.h>
 
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
@@ -31,8 +32,15 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
 {
 	unsigned long mask;
 	unsigned long submask;
+#ifdef CONFIG_S3C2440_C_FIQ
+	unsigned long flags;
+#endif
 
 	submask = __raw_readl(S3C2410_INTSUBMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_save_flags(flags);
+	local_fiq_disable();
+#endif
 	mask = __raw_readl(S3C2410_INTMSK);
 
 	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
@@ -45,6 +53,9 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
 
 	/* write back masks */
 	__raw_writel(submask, S3C2410_INTSUBMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_irq_restore(flags);
+#endif
 
 }
 
@@ -53,8 +64,15 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
 {
 	unsigned long mask;
 	unsigned long submask;
+#ifdef CONFIG_S3C2440_C_FIQ
+	unsigned long flags;
+#endif
 
 	submask = __raw_readl(S3C2410_INTSUBMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_save_flags(flags);
+	local_fiq_disable();
+#endif
 	mask = __raw_readl(S3C2410_INTMSK);
 
 	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
@@ -63,6 +81,9 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
 	/* write back masks */
 	__raw_writel(submask, S3C2410_INTSUBMSK);
 	__raw_writel(mask, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_irq_restore(flags);
+#endif
 }
 
 
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 958737775ad..4b21ac9d693 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -28,6 +28,8 @@
 #include <asm/mach/irq.h>
 
 #include <plat/regs-irqtype.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
@@ -37,12 +39,20 @@ static void
 s3c_irq_mask(unsigned int irqno)
 {
 	unsigned long mask;
-
+#ifdef CONFIG_S3C2440_C_FIQ
+	unsigned long flags;
+#endif
 	irqno -= IRQ_EINT0;
-
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_save_flags(flags);
+	local_fiq_disable();
+#endif
 	mask = __raw_readl(S3C2410_INTMSK);
 	mask |= 1UL << irqno;
 	__raw_writel(mask, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_irq_restore(flags);
+#endif
 }
 
 static inline void
@@ -59,9 +69,19 @@ s3c_irq_maskack(unsigned int irqno)
 {
 	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
 	unsigned long mask;
-
+#ifdef CONFIG_S3C2440_C_FIQ
+	unsigned long flags;
+#endif
+
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_save_flags(flags);
+	local_fiq_disable();
+#endif
 	mask = __raw_readl(S3C2410_INTMSK);
 	__raw_writel(mask|bitval, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_irq_restore(flags);
+#endif
 
 	__raw_writel(bitval, S3C2410_SRCPND);
 	__raw_writel(bitval, S3C2410_INTPND);
@@ -72,15 +92,25 @@ static void
 s3c_irq_unmask(unsigned int irqno)
 {
 	unsigned long mask;
+#ifdef CONFIG_S3C2440_C_FIQ
+	unsigned long flags;
+#endif
 
 	if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
 		irqdbf2("s3c_irq_unmask %d\n", irqno);
 
 	irqno -= IRQ_EINT0;
 
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_save_flags(flags);
+	local_fiq_disable();
+#endif
 	mask = __raw_readl(S3C2410_INTMSK);
 	mask &= ~(1UL << irqno);
 	__raw_writel(mask, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_irq_restore(flags);
+#endif
 }
 
 struct irq_chip s3c_irq_level_chip = {
@@ -523,26 +553,26 @@ void __init s3c24xx_init_irq(void)
 
 	last = 0;
 	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2410_INTPND);
+		pend = __raw_readl(S3C2410_SUBSRCPND);
 
 		if (pend == 0 || pend == last)
 			break;
 
-		__raw_writel(pend, S3C2410_SRCPND);
-		__raw_writel(pend, S3C2410_INTPND);
-		printk("irq: clearing pending status %08x\n", (int)pend);
+		printk("irq: clearing subpending status %08x\n", (int)pend);
+		__raw_writel(pend, S3C2410_SUBSRCPND);
 		last = pend;
 	}
 
 	last = 0;
 	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2410_SUBSRCPND);
+		pend = __raw_readl(S3C2410_INTPND);
 
 		if (pend == 0 || pend == last)
 			break;
 
-		printk("irq: clearing subpending status %08x\n", (int)pend);
-		__raw_writel(pend, S3C2410_SUBSRCPND);
+		__raw_writel(pend, S3C2410_SRCPND);
+		__raw_writel(pend, S3C2410_INTPND);
+		printk("irq: clearing pending status %08x\n", (int)pend);
 		last = pend;
 	}
 
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
new file mode 100644
index 00000000000..d41cccd6a25
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -0,0 +1,437 @@
+/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Copyright (c) 2007, 2008 Ben Dooks
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/plat-s3c/regs-timer.h>
+
+/* Each of the timers 0 through 5 go through the following
+ * clock tree, with the inputs depending on the timers.
+ *
+ * pclk ---- [ prescaler 0 ] -+---> timer 0
+ *			      +---> timer 1
+ *
+ * pclk ---- [ prescaler 1 ] -+---> timer 2
+ *			      +---> timer 3
+ *			      \---> timer 4
+ *
+ * Which are fed into the timers as so:
+ *
+ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 0
+ * tclk 0 ------------------------------/
+ *
+ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 1
+ * tclk 0 ------------------------------/
+ *
+ *
+ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 2
+ * tclk 1 ------------------------------/
+ *
+ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 3
+ * tclk 1 ------------------------------/
+ *
+ * prescaled 1 ---- [ div 2,4,8, 16 ] --\
+ *				       [mux] -> timer 4
+ * tclk 1 ------------------------------/
+ *
+ * Since the mux and the divider are tied together in the
+ * same register space, it is impossible to set the parent
+ * and the rate at the same time. To avoid this, we add an
+ * intermediate 'prescaled-and-divided' clock to select
+ * as the parent for the timer input clock called tdiv.
+ *
+ * prescaled clk --> pwm-tdiv ---\
+ *                             [ mux ] --> timer X
+ * tclk -------------------------/
+*/
+
+static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
+{
+	unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+	if (clk->id == 1) {
+		tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
+		tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
+	} else {
+		tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
+	}
+
+	return clk_get_rate(clk->parent) / (tcfg0 + 1);
+}
+
+/* TODO - add set rate calls. */
+
+static struct clk clk_timer_scaler[] = {
+	[0]	= {
+		.name		= "pwm-scaler0",
+		.id		= -1,
+		.get_rate	= clk_pwm_scaler_getrate,
+	},
+	[1]	= {
+		.name		= "pwm-scaler1",
+		.id		= -1,
+		.get_rate	= clk_pwm_scaler_getrate,
+	},
+};
+
+static struct clk clk_timer_tclk[] = {
+	[0]	= {
+		.name		= "pwm-tclk0",
+		.id		= -1,
+	},
+	[1]	= {
+		.name		= "pwm-tclk1",
+		.id		= -1,
+	},
+};
+
+struct pwm_tdiv_clk {
+	struct clk	clk;
+	unsigned int	divisor;
+};
+
+static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
+{
+	return container_of(clk, struct pwm_tdiv_clk, clk);
+}
+
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << (1 + tcfg1);
+}
+
+static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
+{
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned int divisor;
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
+		divisor = to_tdiv(clk)->divisor;
+	else
+		divisor = tcfg_to_divisor(tcfg1);
+
+	return clk_get_rate(clk->parent) / divisor;
+}
+
+static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	unsigned long parent_rate;
+	unsigned long divisor;
+
+	parent_rate = clk_get_rate(clk->parent);
+	divisor = parent_rate / rate;
+
+	if (divisor <= 2)
+		divisor = 2;
+	else if (divisor <= 4)
+		divisor = 4;
+	else if (divisor <= 8)
+		divisor = 8;
+	else
+		divisor = 16;
+
+	return parent_rate / divisor;
+}
+
+static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
+{
+	unsigned long bits;
+
+	switch (divclk->divisor) {
+	case 2:
+		bits = S3C2410_TCFG1_MUX_DIV2;
+		break;
+	case 4:
+		bits = S3C2410_TCFG1_MUX_DIV4;
+		break;
+	case 8:
+		bits = S3C2410_TCFG1_MUX_DIV8;
+		break;
+	case 16:
+	default:
+		bits = S3C2410_TCFG1_MUX_DIV16;
+		break;
+	}
+
+	return bits;
+}
+
+static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
+{
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned long bits = clk_pwm_tdiv_bits(divclk);
+	unsigned long flags;
+	unsigned long shift =  S3C2410_TCFG1_SHIFT(divclk->clk.id);
+
+	local_irq_save(flags);
+
+	tcfg1 = __raw_readl(S3C2410_TCFG1);
+	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
+	tcfg1 |= bits << shift;
+	__raw_writel(tcfg1, S3C2410_TCFG1);
+
+	local_irq_restore(flags);
+}
+
+static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct pwm_tdiv_clk *divclk = to_tdiv(clk);
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long divisor;
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	rate = clk_round_rate(clk, rate);
+	divisor = parent_rate / rate;
+
+	if (divisor > 16)
+		return -EINVAL;
+
+	divclk->divisor = divisor;
+
+	/* Update the current MUX settings if we are currently
+	 * selected as the clock source for this clock. */
+
+	if (tcfg1 != S3C2410_TCFG1_MUX_TCLK)
+		clk_pwm_tdiv_update(divclk);
+
+	return 0;
+}
+
+static struct pwm_tdiv_clk clk_timer_tdiv[] = {
+	[0]	= {
+		.clk	= {
+			.name		= "pwm-tdiv",
+			.parent		= &clk_timer_scaler[0],
+			.get_rate	= clk_pwm_tdiv_get_rate,
+			.set_rate	= clk_pwm_tdiv_set_rate,
+			.round_rate	= clk_pwm_tdiv_round_rate,
+		},
+	},
+	[1]	= {
+		.clk	= {
+			.name		= "pwm-tdiv",
+			.parent		= &clk_timer_scaler[0],
+			.get_rate	= clk_pwm_tdiv_get_rate,
+			.set_rate	= clk_pwm_tdiv_set_rate,
+			.round_rate	= clk_pwm_tdiv_round_rate,
+		}
+	},
+	[2]	= {
+		.clk	= {
+			.name		= "pwm-tdiv",
+			.parent		= &clk_timer_scaler[1],
+			.get_rate	= clk_pwm_tdiv_get_rate,
+			.set_rate	= clk_pwm_tdiv_set_rate,
+			.round_rate	= clk_pwm_tdiv_round_rate,
+		},
+	},
+	[3]	= {
+		.clk	= {
+			.name		= "pwm-tdiv",
+			.parent		= &clk_timer_scaler[1],
+			.get_rate	= clk_pwm_tdiv_get_rate,
+			.set_rate	= clk_pwm_tdiv_set_rate,
+			.round_rate	= clk_pwm_tdiv_round_rate,
+		},
+	},
+	[4]	= {
+		.clk	= {
+			.name		= "pwm-tdiv",
+			.parent		= &clk_timer_scaler[1],
+			.get_rate	= clk_pwm_tdiv_get_rate,
+			.set_rate	= clk_pwm_tdiv_set_rate,
+			.round_rate	= clk_pwm_tdiv_round_rate,
+		},
+	},
+};
+
+static int __init clk_pwm_tdiv_register(unsigned int id)
+{
+	struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	divclk->clk.id = id;
+	divclk->divisor = tcfg_to_divisor(tcfg1);
+
+	return s3c24xx_register_clock(&divclk->clk);
+}
+
+static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
+{
+	return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
+}
+
+static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
+{
+	return &clk_timer_tdiv[id].clk;
+}
+
+static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
+{
+	unsigned int id = clk->id;
+	unsigned long tcfg1;
+	unsigned long flags;
+	unsigned long bits;
+	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
+
+	if (parent == s3c24xx_pwmclk_tclk(id))
+		bits = S3C2410_TCFG1_MUX_TCLK << shift;
+	else if (parent == s3c24xx_pwmclk_tdiv(id))
+		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	local_irq_save(flags);
+
+	tcfg1 = __raw_readl(S3C2410_TCFG1);
+	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
+	__raw_writel(tcfg1 | bits, S3C2410_TCFG1);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static struct clk clk_tin[] = {
+	[0]	= {
+		.name		= "pwm-tin",
+		.id		= 0,
+		.set_parent	= clk_pwm_tin_set_parent,
+	},
+	[1]	= {
+		.name		= "pwm-tin",
+		.id		= 1,
+		.set_parent	= clk_pwm_tin_set_parent,
+	},
+	[2]	= {
+		.name		= "pwm-tin",
+		.id		= 2,
+		.set_parent	= clk_pwm_tin_set_parent,
+	},
+	[3]	= {
+		.name		= "pwm-tin",
+		.id		= 3,
+		.set_parent	= clk_pwm_tin_set_parent,
+	},
+	[4]	= {
+		.name		= "pwm-tin",
+		.id		= 4,
+		.set_parent	= clk_pwm_tin_set_parent,
+	},
+};
+
+static __init int clk_pwm_tin_register(struct clk *pwm)
+{
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned int id = pwm->id;
+
+	struct clk *parent;
+	int ret;
+
+	ret = s3c24xx_register_clock(pwm);
+	if (ret < 0)
+		return ret;
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
+		parent = s3c24xx_pwmclk_tclk(id);
+	else
+		parent = s3c24xx_pwmclk_tdiv(id);
+
+	return clk_set_parent(pwm, parent);
+}
+
+static __init int s3c24xx_pwmclk_init(void)
+{
+	struct clk *clk_timers;
+	unsigned int clk;
+	int ret;
+
+	clk_timers = clk_get(NULL, "timers");
+	if (IS_ERR(clk_timers)) {
+		printk(KERN_ERR "%s: no parent clock\n", __func__);
+		return -EINVAL;
+	}
+
+	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
+		clk_timer_scaler[clk].parent = clk_timers;
+		ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
+		if (ret < 0) {
+			printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
+			goto err;
+		}
+	}
+
+	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) {
+		ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
+		if (ret < 0) {
+			printk(KERN_ERR "error adding pww tclk%d\n", clk);
+			goto err;
+		}
+	}
+
+	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
+		ret = clk_pwm_tdiv_register(clk);
+		if (ret < 0) {
+			printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
+			goto err;
+		}
+	}
+
+	for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
+		ret = clk_pwm_tin_register(&clk_tin[clk]);
+		if (ret < 0) {
+			printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
+			goto err;
+		}
+	}
+
+	return 0;
+
+ err:
+	return ret;
+}
+
+arch_initcall(s3c24xx_pwmclk_init);
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
index 0120b760315..82a6d4de02a 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -246,6 +246,10 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 
 	tcmp = duty_ns / tin_ns;
 	tcmp = tcnt - tcmp;
+	/* the pwm hw only checks the compare register after a decrement,
+	   so the pin never toggles if tcmp = tcnt */
+	if (tcmp == tcnt)
+		tcmp--;
 
 	pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
 
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 9edf7894eed..da7a61728c1 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -12,8 +12,7 @@
 */
 
 #include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
 
 #include <mach/spi.h>
 #include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index f34d0fc69ad..86b9edc6741 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -12,8 +12,7 @@
 */
 
 #include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
 
 #include <mach/spi.h>
 #include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c
index 07a6516a4f3..47632fc7eb6 100644
--- a/arch/arm/plat-s3c64xx/pm.c
+++ b/arch/arm/plat-s3c64xx/pm.c
@@ -117,8 +117,6 @@ void s3c_pm_save_core(void)
  * this.
  */
 
-#include <plat/regs-gpio.h>
-
 static void s3c64xx_cpu_suspend(void)
 {
 	unsigned long tmp;
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 1debc1f9f98..febac1950d8 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -153,7 +153,7 @@ static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
 	u32 div;
 
 	if (parent < rate)
-		return rate;
+		return parent;
 
 	div = (parent / rate) - 1;
 	if (div > armclk_mask)
@@ -175,7 +175,7 @@ static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
 	div = clk_get_rate(clk->parent) / rate;
 
 	val = __raw_readl(S3C_CLK_DIV0);
-	val &= armclk_mask;
+	val &= ~armclk_mask;
 	val |= (div - 1);
 	__raw_writel(val, S3C_CLK_DIV0);
 
diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
index d4120038220..6d6b1a468ed 100644
--- a/arch/arm/plat-stmp3xxx/pinmux.c
+++ b/arch/arm/plat-stmp3xxx/pinmux.c
@@ -22,7 +22,6 @@
 #include <linux/sysdev.h>
 #include <linux/string.h>
 #include <linux/bitops.h>
-#include <linux/sysdev.h>
 #include <linux/irq.h>
 
 #include <mach/hardware.h>
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 46c9b0a224c..75f19f47fb2 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -72,6 +72,10 @@ static struct ads7846_platform_data ads7843_data = {
 	.debounce_max		= 20,
 	.debounce_rep		= 4,
 	.debounce_tol		= 5,
+
+	.keep_vref_on		= true,
+	.settle_delay_usecs	= 500,
+	.penirq_recheck_delay_usecs = 100,
 };
 
 static struct spi_board_info __initdata spi1_board_info[] = {
diff --git a/arch/avr32/include/asm/pgalloc.h b/arch/avr32/include/asm/pgalloc.h
index 64082132394..92ecd8446ef 100644
--- a/arch/avr32/include/asm/pgalloc.h
+++ b/arch/avr32/include/asm/pgalloc.h
@@ -83,7 +83,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	quicklist_free_page(QUICK_PT, NULL, pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,addr)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
index 4442f8d2d42..fc42de5ca20 100644
--- a/arch/avr32/include/asm/thread_info.h
+++ b/arch/avr32/include/asm/thread_info.h
@@ -40,7 +40,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,				\
 	.flags		= 0,						\
 	.cpu		= 0,						\
-	.preempt_count	= 1,						\
+	.preempt_count	= INIT_PREEMPT_COUNT,				\
 	.restart_block	= {						\
 		.fn	= do_no_restart_syscall				\
 	}								\
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index 6e3d491184e..b91b2044af9 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -32,22 +32,25 @@ void NORET_TYPE die(const char *str, struct pt_regs *regs, long err)
 	spin_lock_irq(&die_lock);
 	bust_spinlocks(1);
 
-	printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
+	printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n",
 	       str, err, ++die_counter);
+
+	printk(KERN_EMERG);
+
 #ifdef CONFIG_PREEMPT
-	printk("PREEMPT ");
+	printk(KERN_CONT "PREEMPT ");
 #endif
 #ifdef CONFIG_FRAME_POINTER
-	printk("FRAME_POINTER ");
+	printk(KERN_CONT "FRAME_POINTER ");
 #endif
 	if (current_cpu_data.features & AVR32_FEATURE_OCD) {
 		unsigned long did = ocd_read(DID);
-		printk("chip: 0x%03lx:0x%04lx rev %lu\n",
+		printk(KERN_CONT "chip: 0x%03lx:0x%04lx rev %lu\n",
 		       (did >> 1) & 0x7ff,
 		       (did >> 12) & 0x7fff,
 		       (did >> 28) & 0xf);
 	} else {
-		printk("cpu: arch %u r%u / core %u r%u\n",
+		printk(KERN_CONT "cpu: arch %u r%u / core %u r%u\n",
 		       current_cpu_data.arch_type,
 		       current_cpu_data.arch_revision,
 		       current_cpu_data.cpu_type,
diff --git a/arch/avr32/lib/memcpy.S b/arch/avr32/lib/memcpy.S
index 0abb26142b6..c2ca49d705a 100644
--- a/arch/avr32/lib/memcpy.S
+++ b/arch/avr32/lib/memcpy.S
@@ -24,8 +24,8 @@ memcpy:
 	brne	1f
 
 	/* At this point, "from" is word-aligned */
-2:	sub	r10, 4
-	mov	r9, r12
+2:	mov	r9, r12
+5:	sub	r10, 4
 	brlt	4f
 
 3:	ld.w	r8, r11++
@@ -49,6 +49,7 @@ memcpy:
 
 	/* Handle unaligned "from" pointer */
 1:	sub	r10, 4
+	movlt	r9, r12
 	brlt	4b
 	add	r10, r9
 	lsl	r9, 2
@@ -59,4 +60,13 @@ memcpy:
 	st.b	r12++, r8
 	ld.ub	r8, r11++
 	st.b	r12++, r8
-	rjmp	2b
+	mov	r8, r12
+	add	pc, pc, r9
+	sub	r8, 1
+	nop
+	sub	r8, 1
+	nop
+	sub	r8, 1
+	nop
+	mov	r9, r8
+	rjmp	5b
diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S
index 16561ab18b3..f8a664f022b 100644
--- a/arch/blackfin/include/asm/context.S
+++ b/arch/blackfin/include/asm/context.S
@@ -223,9 +223,10 @@
 	[--sp] = RETN;
 	[--sp] = RETE;
 	[--sp] = SEQSTAT;
-#ifdef CONFIG_KGDB
-	r1.l = lo(IPEND);
-	r1.h = hi(IPEND);
+#ifdef CONFIG_DEBUG_KERNEL
+	p1.l = lo(IPEND);
+	p1.h = hi(IPEND);
+	r1 = [p1];
 	[--sp] = r1;
 #else
 	[--sp] = r0;	/* Skip IPEND as well. */
diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h
index 565b8136855..fadfa82f93b 100644
--- a/arch/blackfin/include/asm/cpu.h
+++ b/arch/blackfin/include/asm/cpu.h
@@ -32,7 +32,6 @@ struct blackfin_cpudata {
 	struct task_struct *idle;
 	unsigned int imemctl;
 	unsigned int dmemctl;
-	unsigned long loops_per_jiffy;
 	unsigned long dcache_invld_count;
 	unsigned long icache_invld_count;
 };
diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h
index cbd52f86bb9..0b78b873df5 100644
--- a/arch/blackfin/include/asm/hardirq.h
+++ b/arch/blackfin/include/asm/hardirq.h
@@ -6,6 +6,9 @@
 extern void ack_bad_irq(unsigned int irq);
 #define ack_bad_irq ack_bad_irq
 
+/* Define until common code gets sane defaults */
+#define HARDIRQ_BITS 9
+
 #include <asm-generic/hardirq.h>
 
 #endif
diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h
index d0be99be830..a36ad8dac06 100644
--- a/arch/blackfin/include/asm/processor.h
+++ b/arch/blackfin/include/asm/processor.h
@@ -105,23 +105,16 @@ static inline uint32_t __pure bfin_revid(void)
 	/* Always use CHIPID, to work around ANOMALY_05000234 */
 	uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28;
 
-#ifdef CONFIG_BF52x
-	/* ANOMALY_05000357
+#ifdef _BOOTROM_GET_DXE_ADDRESS_TWI
+	/*
+	 * ANOMALY_05000364
 	 * Incorrect Revision Number in DSPID Register
 	 */
-	if (revid == 0)
-		switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) {
-		case 0x0010:
-			revid = 0;
-			break;
-		case 0x2796:
-			revid = 1;
-			break;
-		default:
-			revid = 0xFFFF;
-			break;
-		}
+	if (ANOMALY_05000364 &&
+	    bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI) == 0x2796)
+		revid = 1;
 #endif
+
 	return revid;
 }
 
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index 2920087516f..2bbfdd950af 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -77,7 +77,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count  = 1,                    \
+	.preempt_count  = INIT_PREEMPT_COUNT,   \
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index e0bf8cc0690..9f9b8281665 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -253,32 +253,31 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
 	BUG_ON(src % 4);
 	BUG_ON(size % 4);
 
-	/* Force a sync in case a previous config reset on this channel
-	 * occurred.  This is needed so subsequent writes to DMA registers
-	 * are not spuriously lost/corrupted.
-	 */
-	__builtin_bfin_ssync();
-
 	src_ch = 0;
 	/* Find an avalible memDMA channel */
 	while (1) {
-		if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) {
-			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
-			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
-		} else {
+		if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) {
 			dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
 			src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
+		} else {
+			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
+			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
 		}
 
-		if (!bfin_read16(&src_ch->cfg)) {
+		if (!bfin_read16(&src_ch->cfg))
+			break;
+		else if (bfin_read16(&dst_ch->irq_status) & DMA_DONE) {
+			bfin_write16(&src_ch->cfg, 0);
 			break;
-		} else {
-			if (bfin_read16(&src_ch->irq_status) & DMA_DONE)
-				bfin_write16(&src_ch->cfg, 0);
 		}
-
 	}
 
+	/* Force a sync in case a previous config reset on this channel
+	 * occurred.  This is needed so subsequent writes to DMA registers
+	 * are not spuriously lost/corrupted.
+	 */
+	__builtin_bfin_ssync();
+
 	/* Destination */
 	bfin_write32(&dst_ch->start_addr, dst);
 	bfin_write16(&dst_ch->x_count, size >> 2);
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index beffa00a93c..6b944627137 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -686,14 +686,12 @@ void bfin_gpio_pm_hibernate_restore(void)
 		*port_fer[bank] = gpio_bank_saved[bank].fer;
 #endif
 		gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
+		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+						& gpio_bank_saved[bank].dir;
 		gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
 		gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
 		gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
 		gpio_array[bank]->both  = gpio_bank_saved[bank].both;
-
-		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
-						| gpio_bank_saved[bank].dir;
-
 		gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
 	}
 	AWA_DUMMY_READ(maska);
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index d6c067782e6..685f160a5a3 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -72,13 +72,24 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 	}
 
 	/* Cover L1 memory.  One 4M area for code and data each is enough.  */
-	if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
-		d_tbl[i_d].addr = L1_DATA_A_START;
-		d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+	if (cpu == 0) {
+		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+			d_tbl[i_d].addr = L1_DATA_A_START;
+			d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+		}
+		i_tbl[i_i].addr = L1_CODE_START;
+		i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
 	}
-	i_tbl[i_i].addr = L1_CODE_START;
-	i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
-
+#ifdef CONFIG_SMP
+	else {
+		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+			d_tbl[i_d].addr = COREB_L1_DATA_A_START;
+			d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+		}
+		i_tbl[i_i].addr = COREB_L1_CODE_START;
+		i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+	}
+#endif
 	first_switched_dcplb = i_d;
 	first_switched_icplb = i_i;
 
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 79cad0ac589..9da36bab7cc 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -361,7 +361,7 @@ static inline
 int in_mem_const(unsigned long addr, unsigned long size,
                  unsigned long const_addr, unsigned long const_size)
 {
-	return in_mem_const_off(addr, 0, size, const_addr, const_size);
+	return in_mem_const_off(addr, size, 0, const_addr, const_size);
 }
 #define IN_ASYNC(bnum, bctlnum) \
 ({ \
@@ -390,13 +390,13 @@ int bfin_mem_access_type(unsigned long addr, unsigned long size)
 	if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
 		return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
 #ifdef COREB_L1_CODE_START
-	if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
 	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
-	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
-	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
 #endif
 	if (in_mem_const(addr, size, L2_START, L2_LENGTH))
@@ -472,13 +472,13 @@ int _access_ok(unsigned long addr, unsigned long size)
 	if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
 		return 1;
 #ifdef COREB_L1_CODE_START
-	if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
 		return 1;
 	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
 		return 1;
-	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
 		return 1;
-	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
 		return 1;
 #endif
 	if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index d76618db50d..6a387eec6b6 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -31,7 +31,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 298f023bcc0..6225edae488 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -168,7 +168,6 @@ void __cpuinit bfin_setup_cpudata(unsigned int cpu)
 	struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);
 
 	cpudata->idle = current;
-	cpudata->loops_per_jiffy = loops_per_jiffy;
 	cpudata->imemctl = bfin_read_IMEM_CONTROL();
 	cpudata->dmemctl = bfin_read_DMEM_CONTROL();
 }
@@ -408,13 +407,14 @@ static void __init print_memory_map(char *who)
 			bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
 		switch (bfin_memmap.map[i].type) {
 		case BFIN_MEMMAP_RAM:
-				printk("(usable)\n");
-				break;
+			printk(KERN_CONT "(usable)\n");
+			break;
 		case BFIN_MEMMAP_RESERVED:
-				printk("(reserved)\n");
-				break;
-		default:	printk("type %lu\n", bfin_memmap.map[i].type);
-				break;
+			printk(KERN_CONT "(reserved)\n");
+			break;
+		default:
+			printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type);
+			break;
 		}
 	}
 }
@@ -567,17 +567,23 @@ static __init void memory_setup(void)
 #  endif				/* ANOMALY_05000263 */
 # endif				/* CONFIG_ROMFS_FS */
 
-	memory_end -= mtd_size;
-
-	if (mtd_size == 0) {
-		console_init();
-		panic("Don't boot kernel without rootfs attached.");
+	/* Since the default MTD_UCLINUX has no magic number, we just blindly
+	 * read 8 past the end of the kernel's image, and look at it.
+	 * When no image is attached, mtd_size is set to a random number
+	 * Do some basic sanity checks before operating on things
+	 */
+	if (mtd_size == 0 || memory_end <= mtd_size) {
+		pr_emerg("Could not find valid ram mtd attached.\n");
+	} else {
+		memory_end -= mtd_size;
+
+		/* Relocate MTD image to the top of memory after the uncached memory area */
+		uclinux_ram_map.phys = memory_mtd_start = memory_end;
+		uclinux_ram_map.size = mtd_size;
+		pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n",
+			_end, mtd_size, (void *)memory_mtd_start);
+		dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 	}
-
-	/* Relocate MTD image to the top of memory after the uncached memory area */
-	uclinux_ram_map.phys = memory_mtd_start = memory_end;
-	uclinux_ram_map.size = mtd_size;
-	dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 #endif				/* CONFIG_MTD_UCLINUX */
 
 #if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
@@ -614,19 +620,19 @@ static __init void memory_setup(void)
 	printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
 
 	printk(KERN_INFO "Memory map:\n"
-		KERN_INFO "  fixedcode = 0x%p-0x%p\n"
-		KERN_INFO "  text      = 0x%p-0x%p\n"
-		KERN_INFO "  rodata    = 0x%p-0x%p\n"
-		KERN_INFO "  bss       = 0x%p-0x%p\n"
-		KERN_INFO "  data      = 0x%p-0x%p\n"
-		KERN_INFO "    stack   = 0x%p-0x%p\n"
-		KERN_INFO "  init      = 0x%p-0x%p\n"
-		KERN_INFO "  available = 0x%p-0x%p\n"
+	       "  fixedcode = 0x%p-0x%p\n"
+	       "  text      = 0x%p-0x%p\n"
+	       "  rodata    = 0x%p-0x%p\n"
+	       "  bss       = 0x%p-0x%p\n"
+	       "  data      = 0x%p-0x%p\n"
+	       "    stack   = 0x%p-0x%p\n"
+	       "  init      = 0x%p-0x%p\n"
+	       "  available = 0x%p-0x%p\n"
 #ifdef CONFIG_MTD_UCLINUX
-		KERN_INFO "  rootfs    = 0x%p-0x%p\n"
+	       "  rootfs    = 0x%p-0x%p\n"
 #endif
 #if DMA_UNCACHED_REGION > 0
-		KERN_INFO "  DMA Zone  = 0x%p-0x%p\n"
+	       "  DMA Zone  = 0x%p-0x%p\n"
 #endif
 		, (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
 		_stext, _etext,
@@ -859,20 +865,13 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	printk(KERN_INFO "Hardware Trace ");
 	if (bfin_read_TBUFCTL() & 0x1)
-		printk("Active ");
+		printk(KERN_CONT "Active ");
 	else
-		printk("Off ");
+		printk(KERN_CONT "Off ");
 	if (bfin_read_TBUFCTL() & 0x2)
-		printk("and Enabled\n");
+		printk(KERN_CONT "and Enabled\n");
 	else
-	printk("and Disabled\n");
-
-#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
-	/* we need to initialize the Flashrom device here since we might
-	 * do things with flash early on in the boot
-	 */
-	flash_probe();
-#endif
+		printk(KERN_CONT "and Disabled\n");
 
 	printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
 
@@ -937,10 +936,6 @@ void __init setup_arch(char **cmdline_p)
 			       CPU, bfin_revid());
 	}
 
-	/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
-	if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
-		panic("You can't run on this processor due to 05000448");
-
 	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
 	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -1163,9 +1158,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		sclk/1000000, sclk%1000000);
 	seq_printf(m, "bogomips\t: %lu.%02lu\n"
 		"Calibration\t: %lu loops\n",
-		(cpudata->loops_per_jiffy * HZ) / 500000,
-		((cpudata->loops_per_jiffy * HZ) / 5000) % 100,
-		(cpudata->loops_per_jiffy * HZ));
+		(loops_per_jiffy * HZ) / 500000,
+		((loops_per_jiffy * HZ) / 5000) % 100,
+		(loops_per_jiffy * HZ));
 
 	/* Check Cache configutation */
 	switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index a8f1329c15a..3da60fb13ce 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -29,7 +29,6 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 8eeb457ce5d..bf2b2d1f8ae 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -212,7 +212,7 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
 	console_verbose();
 	oops_in_progress = 1;
 #ifdef CONFIG_DEBUG_VERBOSE
-	printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
+	printk(KERN_EMERG "Double Fault\n");
 #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
 	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
 		unsigned int cpu = smp_processor_id();
@@ -570,11 +570,12 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	if (kernel_mode_regs(fp) || (current && !current->mm)) {
 		console_verbose();
 		oops_in_progress = 1;
-		if (strerror)
-			verbose_printk(strerror);
 	}
 
 	if (sig != SIGTRAP) {
+		if (strerror)
+			verbose_printk(strerror);
+
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
 		show_regs(fp);
@@ -583,15 +584,14 @@ asmlinkage void trap_c(struct pt_regs *fp)
 #ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
 		if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
 			verbose_printk(KERN_NOTICE "No trace since you do not have "
-				"CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n"
-				KERN_NOTICE "\n");
+			       "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n");
 		else
 #endif
 			dump_bfin_trace_buffer();
 
 		if (oops_in_progress) {
 			/* Dump the current kernel stack */
-			verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+			verbose_printk(KERN_NOTICE "Kernel Stack\n");
 			show_stack(current, NULL);
 			print_modules();
 #ifndef CONFIG_ACCESS_CHECK
@@ -620,7 +620,9 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		force_sig_info(sig, &info, current);
 	}
 
-	if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8))
+	if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) ||
+	    (ANOMALY_05000281 && trapnr == VEC_HWERR) ||
+	    (ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL)))
 		fp->pc = SAFE_USER_INSTRUCTION;
 
  traps_done:
@@ -906,7 +908,7 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 
 			ret_addr = 0;
 			if (!j && i % 8 == 0)
-				printk("\n" KERN_NOTICE "%p:",addr);
+				printk(KERN_NOTICE "%p:",addr);
 
 			/* if it is an odd address, or zero, just skip it */
 			if (*addr & 0x1 || !*addr)
@@ -996,9 +998,9 @@ void dump_bfin_process(struct pt_regs *fp)
 
 		printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu);
 		if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE  "TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
-				KERN_NOTICE " BSS = 0x%p-0x%p  USER-STACK = 0x%p\n"
-				KERN_NOTICE "\n",
+			verbose_printk(KERN_NOTICE
+				"TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
+				" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
 				(void *)current->mm->start_code,
 				(void *)current->mm->end_code,
 				(void *)current->mm->start_data,
@@ -1009,8 +1011,8 @@ void dump_bfin_process(struct pt_regs *fp)
 		else
 			verbose_printk(KERN_NOTICE "invalid mm\n");
 	} else
-		verbose_printk(KERN_NOTICE "\n" KERN_NOTICE
-		     "No Valid process in current context\n");
+		verbose_printk(KERN_NOTICE
+			       "No Valid process in current context\n");
 #endif
 }
 
@@ -1028,7 +1030,7 @@ void dump_bfin_mem(struct pt_regs *fp)
 	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
 	     addr++) {
 		if (!((unsigned long)addr & 0xF))
-			verbose_printk("\n" KERN_NOTICE "0x%p: ", addr);
+			verbose_printk(KERN_NOTICE "0x%p: ", addr);
 
 		if (!get_instruction(&val, addr)) {
 				val = 0;
@@ -1056,9 +1058,9 @@ void dump_bfin_mem(struct pt_regs *fp)
 	    oops_in_progress)){
 		verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
 #ifndef CONFIG_DEBUG_HWERR
-		verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n"
-			KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a"
-			 " better idea where it came from\n");
+		verbose_printk(KERN_NOTICE
+"The remaining message may be meaningless\n"
+"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
 #else
 		/* If we are handling only one peripheral interrupt
 		 * and current mm and pid are valid, and the last error
@@ -1114,9 +1116,10 @@ void show_regs(struct pt_regs *fp)
 
 	verbose_printk(KERN_NOTICE "%s", linux_banner);
 
-	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
+	verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n",
+		       print_tainted());
 	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
-		(long)fp->seqstat, fp->ipend, fp->syscfg);
+		       (long)fp->seqstat, fp->ipend, fp->syscfg);
 	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
 		verbose_printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
 			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
@@ -1184,7 +1187,7 @@ unlock:
 		verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
 	}
 
-	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
+	verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
 	verbose_printk(KERN_NOTICE " R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
 		fp->r0, fp->r1, fp->r2, fp->r3);
 	verbose_printk(KERN_NOTICE " R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
diff --git a/arch/blackfin/lib/lshrdi3.c b/arch/blackfin/lib/lshrdi3.c
index 84b9c559222..e57bf6fbdf3 100644
--- a/arch/blackfin/lib/lshrdi3.c
+++ b/arch/blackfin/lib/lshrdi3.c
@@ -27,21 +27,7 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#define BITS_PER_UNIT 8
-
-typedef int SItype __attribute__ ((mode(SI)));
-typedef unsigned int USItype __attribute__ ((mode(SI)));
-typedef int DItype __attribute__ ((mode(DI)));
-typedef int word_type __attribute__ ((mode(__word__)));
-
-struct DIstruct {
-	SItype high, low;
-};
-
-typedef union {
-	struct DIstruct s;
-	DItype ll;
-} DIunion;
+#include "gcclib.h"
 
 #ifdef CONFIG_ARITHMETIC_OPS_L1
 DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text));
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index d9791106be9..809be268e42 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -534,7 +534,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index 426e064062a..753ed810e1c 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -82,6 +82,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -117,6 +118,7 @@
 #define ANOMALY_05000357 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000371 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
index 0fb2ce5d840..dbade93395e 100644
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index f4867ce0c61..b09484f538f 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -793,7 +793,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 		.type = "pcf8574_lcd",
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index b2f30f06b73..2ad68cd10ae 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -591,7 +591,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 799a1d1fa89..75e563d3f9d 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -858,7 +858,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 0d63f740616..c438ca89d8c 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -176,6 +176,8 @@
 #define ANOMALY_05000443 (1)
 /* The WURESET Bit in the SYSCR Register is not Functional */
 #define ANOMALY_05000445 (1)
+/* USB DMA Short Packet Data Corruption */
+#define ANOMALY_05000450 (1)
 /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
 #define ANOMALY_05000451 (1)
 /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
@@ -201,6 +203,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -238,6 +241,5 @@
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
-#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index a625659dd67..ebd6cebc1fb 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index a68ade8a3ca..3d743ccaff6 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -453,7 +453,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = 39,
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 70a0ad69c61..cd83db2fb1a 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -335,6 +335,7 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index a3789d7ccf8..4062e24e759 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index c1f76dd2c4e..bd656907b8c 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1313,10 +1313,10 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
 	{
 		I2C_BOARD_INFO("ad7142_joystick", 0x2C),
-		.irq = IRQ_PF5,
+		.irq = IRQ_PG5,
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 57c128cc3b6..e66aa131f51 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -167,6 +167,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -186,6 +187,7 @@
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index b86662fb9de..e95d54f9af6 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index c97acdf85cd..451cf8a82a4 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -137,6 +137,7 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000182 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -160,6 +161,7 @@
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
index c536551eb4b..999f239fe1a 100644
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 81f5b95cc36..dc0dd9b2bce 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -864,7 +864,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 
 #if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 18a4cd24f67..cd040fe0bc5 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -195,6 +195,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -226,6 +227,7 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 94b8e277f09..a5312b2d267 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -288,6 +288,7 @@
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index a1b50878553..fd5e8878b8c 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h
index a63e15c86d9..5b96ea549a0 100644
--- a/arch/blackfin/mach-bf561/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h
@@ -37,7 +37,6 @@
 
 /* Memory Map for ADSP-BF561 processors */
 
-#ifdef CONFIG_BF561
 #define COREA_L1_CODE_START       0xFFA00000
 #define COREA_L1_DATA_A_START     0xFF800000
 #define COREA_L1_DATA_B_START     0xFF900000
@@ -74,6 +73,28 @@
 #define BFIN_DCACHESIZE	(0*1024)
 #define BFIN_DSUPBANKS	0
 #endif /*CONFIG_BFIN_DCACHE*/
+
+/*
+ * If we are in SMP mode, then the cache settings of Core B will match
+ * the settings of Core A.  If we aren't, then we assume Core B is not
+ * using any cache.  This allows the rest of the kernel to work with
+ * the core in either mode as we are only loading user code into it and
+ * it is the user's problem to make sure they aren't doing something
+ * stupid there.
+ *
+ * Note that we treat the L1 code region as a contiguous blob to make
+ * the rest of the kernel simpler.  Easier to check one region than a
+ * bunch of small ones.  Again, possible misbehavior here is the fault
+ * of the user -- don't try to use memory that doesn't exist.
+ */
+#ifdef CONFIG_SMP
+# define COREB_L1_CODE_LENGTH     L1_CODE_LENGTH
+# define COREB_L1_DATA_A_LENGTH   L1_DATA_A_LENGTH
+# define COREB_L1_DATA_B_LENGTH   L1_DATA_B_LENGTH
+#else
+# define COREB_L1_CODE_LENGTH     0x14000
+# define COREB_L1_DATA_A_LENGTH   0x8000
+# define COREB_L1_DATA_B_LENGTH   0x8000
 #endif
 
 /* Level 2 Memory */
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 5a4e7c7fd92..fb1795d5be2 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -218,7 +218,7 @@ ENTRY(_ex_single_step)
 	/* Single stepping only a single instruction, so clear the trace
 	 * bit here.  */
 	r7 = syscfg;
-	bitclr (r7, 0);
+	bitclr (r7, SYSCFG_SSSTEP_P);
 	syscfg = R7;
 	jump _ex_trap_c;
 
@@ -251,7 +251,7 @@ ENTRY(_ex_single_step)
 	if !cc jump _bfin_return_from_exception;
 
 	r7 = syscfg;
-	bitclr (r7, 0);
+	bitclr (r7, SYSCFG_SSSTEP_P);	/* Turn off single step */
 	syscfg = R7;
 
 	/* Fall through to _bfin_return_from_exception.  */
@@ -342,9 +342,11 @@ ENTRY(_ex_trap_c)
 	r6 = retx;
 	[p5 + PDA_RETX] = r6;
 #endif
+	/* Save the state of single stepping */
 	r6 = SYSCFG;
 	[p5 + PDA_SYSCFG] = r6;
-	BITCLR(r6, 0);
+	/* Clear it while we handle the exception in IRQ5 mode */
+	BITCLR(r6, SYSCFG_SSSTEP_P);
 	SYSCFG = r6;
 
 	/* Disable all interrupts, but make sure level 5 is enabled so
@@ -367,7 +369,7 @@ ENDPROC(_ex_trap_c)
  * exception. This is a unrecoverable event, so crash.
  * Note: this cannot be ENTRY() as we jump here with "if cc jump" ...
  */
-_double_fault:
+ENTRY(_double_fault)
 	/* Turn caches & protection off, to ensure we don't get any more
 	 * double exceptions
 	 */
@@ -872,7 +874,7 @@ ENTRY(_ret_from_exception)
 	raise 15;		/* raise evt15 to do signal or reschedule */
 4:
 	r0 = syscfg;
-	bitclr(r0, 0);
+	bitclr(r0, SYSCFG_SSSTEP_P);		/* Turn off single step */
 	syscfg = r0;
 5:
 	rts;
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 61840059dfa..349ee3f5466 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -211,6 +211,8 @@ int smp_call_function(void (*func)(void *info), void *info, int wait)
 		return 0;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return -ENOMEM;
 	INIT_LIST_HEAD(&msg->list);
 	msg->call_struct.func = func;
 	msg->call_struct.info = info;
@@ -252,6 +254,8 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
 	cpu_set(cpu, callmap);
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return -ENOMEM;
 	INIT_LIST_HEAD(&msg->list);
 	msg->call_struct.func = func;
 	msg->call_struct.info = info;
@@ -287,6 +291,8 @@ void smp_send_reschedule(int cpu)
 		return;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return;
 	memset(msg, 0, sizeof(msg));
 	INIT_LIST_HEAD(&msg->list);
 	msg->type = BFIN_IPI_RESCHEDULE;
@@ -314,6 +320,8 @@ void smp_send_stop(void)
 		return;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return;
 	memset(msg, 0, sizeof(msg));
 	INIT_LIST_HEAD(&msg->list);
 	msg->type = BFIN_IPI_CPU_STOP;
@@ -450,7 +458,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	unsigned int cpu;
 
 	for_each_online_cpu(cpu)
-		bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
+		bogosum += loops_per_jiffy;
 
 	printk(KERN_INFO "SMP: Total of %d processors activated "
 	       "(%lu.%02lu BogoMIPS).\n",
diff --git a/arch/cris/include/asm/pgalloc.h b/arch/cris/include/asm/pgalloc.h
index a1ba761d057..6da975db112 100644
--- a/arch/cris/include/asm/pgalloc.h
+++ b/arch/cris/include/asm/pgalloc.h
@@ -47,7 +47,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,address)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\
diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h
index bc5b2935ca5..c3aade36c33 100644
--- a/arch/cris/include/asm/thread_info.h
+++ b/arch/cris/include/asm/thread_info.h
@@ -50,8 +50,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 #define INIT_THREAD_INFO(tsk)				\
@@ -60,7 +58,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,		\
 	.flags		= 0,				\
 	.cpu		= 0,				\
-	.preempt_count	= 1,				\
+	.preempt_count	= INIT_PREEMPT_COUNT,		\
 	.addr_limit	= KERNEL_DS,			\
 	.restart_block = {				\
 		       .fn = do_no_restart_syscall,	\
diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c
index a79fbd87021..2ad962c7e88 100644
--- a/arch/cris/kernel/sys_cris.c
+++ b/arch/cris/kernel/sys_cris.c
@@ -15,7 +15,6 @@
 #include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 8a5bd7a9c6f..b86e19c9b5b 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -7,6 +7,7 @@ config FRV
 	default y
 	select HAVE_IDE
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_PERF_COUNTERS
 
 config ZONE_DMA
 	bool
diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h
index 0409d981fd3..00a57af79af 100644
--- a/arch/frv/include/asm/atomic.h
+++ b/arch/frv/include/asm/atomic.h
@@ -121,10 +121,72 @@ static inline void atomic_dec(atomic_t *v)
 #define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
 #define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
 
+/*
+ * 64-bit atomic ops
+ */
+typedef struct {
+	volatile long long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+static inline long long atomic64_read(atomic64_t *v)
+{
+	long long counter;
+
+	asm("ldd%I1 %M1,%0"
+	    : "=e"(counter)
+	    : "m"(v->counter));
+	return counter;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+	asm volatile("std%I0 %1,%M0"
+		     : "=m"(v->counter)
+		     : "e"(i));
+}
+
+extern long long atomic64_inc_return(atomic64_t *v);
+extern long long atomic64_dec_return(atomic64_t *v);
+extern long long atomic64_add_return(long long i, atomic64_t *v);
+extern long long atomic64_sub_return(long long i, atomic64_t *v);
+
+static inline long long atomic64_add_negative(long long i, atomic64_t *v)
+{
+	return atomic64_add_return(i, v) < 0;
+}
+
+static inline void atomic64_add(long long i, atomic64_t *v)
+{
+	atomic64_add_return(i, v);
+}
+
+static inline void atomic64_sub(long long i, atomic64_t *v)
+{
+	atomic64_sub_return(i, v);
+}
+
+static inline void atomic64_inc(atomic64_t *v)
+{
+	atomic64_inc_return(v);
+}
+
+static inline void atomic64_dec(atomic64_t *v)
+{
+	atomic64_dec_return(v);
+}
+
+#define atomic64_sub_and_test(i,v)	(atomic64_sub_return((i), (v)) == 0)
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+#define atomic64_inc_and_test(v)	(atomic64_inc_return((v)) == 0)
+
 /*****************************************************************************/
 /*
  * exchange value with memory
  */
+extern uint64_t __xchg_64(uint64_t i, volatile void *v);
+
 #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
 
 #define xchg(ptr, x)								\
@@ -174,8 +236,10 @@ extern uint32_t __xchg_32(uint32_t i, volatile void *v);
 
 #define tas(ptr) (xchg((ptr), 1))
 
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define atomic_cmpxchg(v, old, new)	(cmpxchg(&(v)->counter, old, new))
+#define atomic_xchg(v, new)		(xchg(&(v)->counter, new))
+#define atomic64_cmpxchg(v, old, new)	(__cmpxchg_64(old, new, &(v)->counter))
+#define atomic64_xchg(v, new)		(__xchg_64(new, &(v)->counter))
 
 static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 {
diff --git a/arch/frv/include/asm/perf_counter.h b/arch/frv/include/asm/perf_counter.h
new file mode 100644
index 00000000000..ccf726e61b2
--- /dev/null
+++ b/arch/frv/include/asm/perf_counter.h
@@ -0,0 +1,17 @@
+/* FRV performance counter support
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PERF_COUNTER_H
+#define _ASM_PERF_COUNTER_H
+
+#define PERF_COUNTER_INDEX_OFFSET	0
+
+#endif /* _ASM_PERF_COUNTER_H */
diff --git a/arch/frv/include/asm/pgalloc.h b/arch/frv/include/asm/pgalloc.h
index 971e6addb00..416d19a632f 100644
--- a/arch/frv/include/asm/pgalloc.h
+++ b/arch/frv/include/asm/pgalloc.h
@@ -49,7 +49,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,address)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb),(pte));			\
@@ -62,7 +62,7 @@ do {							\
  */
 #define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *) 2); })
 #define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb,x)		do { } while (0)
+#define __pmd_free_tlb(tlb,x,a)		do { } while (0)
 
 #endif /* CONFIG_MMU */
 
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
index 33233011b1c..22c60692b55 100644
--- a/arch/frv/include/asm/pgtable.h
+++ b/arch/frv/include/asm/pgtable.h
@@ -225,7 +225,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
  */
 #define pud_alloc_one(mm, address)		NULL
 #define pud_free(mm, x)				do { } while (0)
-#define __pud_free_tlb(tlb, x)			do { } while (0)
+#define __pud_free_tlb(tlb, x, address)		do { } while (0)
 
 /*
  * The "pud_xxx()" functions here are trivial for a folded two-level
diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h
index 7742ec000cc..efd22d9077a 100644
--- a/arch/frv/include/asm/system.h
+++ b/arch/frv/include/asm/system.h
@@ -208,6 +208,8 @@ extern void free_initmem(void);
  * - if (*ptr == test) then orig = *ptr; *ptr = test;
  * - if (*ptr != test) then orig = *ptr;
  */
+extern uint64_t __cmpxchg_64(uint64_t test, uint64_t new, volatile uint64_t *v);
+
 #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
 
 #define cmpxchg(ptr, test, new)							\
diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h
index e8a5ed7be02..e608e056bb5 100644
--- a/arch/frv/include/asm/thread_info.h
+++ b/arch/frv/include/asm/thread_info.h
@@ -56,8 +56,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 
@@ -67,7 +65,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index 96d78d5d2c4..4a8fb427ce0 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -341,10 +341,12 @@
 #define __NR_inotify_init1	332
 #define __NR_preadv		333
 #define __NR_pwritev		334
+#define __NR_rt_tgsigqueueinfo	335
+#define __NR_perf_counter_open	336
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 335
+#define NR_syscalls 337
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 /* #define __ARCH_WANT_OLD_READDIR */
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index 356e0e327a8..fde1e446b44 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1524,5 +1524,7 @@ sys_call_table:
 	.long sys_inotify_init1
 	.long sys_preadv
 	.long sys_pwritev
+	.long sys_rt_tgsigqueueinfo	/* 335 */
+	.long sys_perf_counter_open
 
 syscall_table_size = (. - sys_call_table)
diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c
index 0316b3c50ef..a89803b58b9 100644
--- a/arch/frv/kernel/frv_ksyms.c
+++ b/arch/frv/kernel/frv_ksyms.c
@@ -67,6 +67,10 @@ EXPORT_SYMBOL(atomic_sub_return);
 EXPORT_SYMBOL(__xchg_32);
 EXPORT_SYMBOL(__cmpxchg_32);
 #endif
+EXPORT_SYMBOL(atomic64_add_return);
+EXPORT_SYMBOL(atomic64_sub_return);
+EXPORT_SYMBOL(__xchg_64);
+EXPORT_SYMBOL(__cmpxchg_64);
 
 EXPORT_SYMBOL(__debug_bug_printk);
 EXPORT_SYMBOL(__delay_loops_MHz);
diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile
index 08be305c9f4..0a377210c89 100644
--- a/arch/frv/lib/Makefile
+++ b/arch/frv/lib/Makefile
@@ -4,5 +4,5 @@
 
 lib-y := \
 	__ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \
-	checksum.o memcpy.o memset.o atomic-ops.o \
-	outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o
+	checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \
+	outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o perf_counter.o
diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S
index ee0ac905fb0..5e9e6ab5dd0 100644
--- a/arch/frv/lib/atomic-ops.S
+++ b/arch/frv/lib/atomic-ops.S
@@ -163,11 +163,10 @@ __cmpxchg_32:
 	ld.p		@(gr11,gr0),gr8
 	orcr		cc7,cc7,cc3
 	subcc		gr8,gr9,gr7,icc0
-	bne		icc0,#0,1f
+	bnelr		icc0,#0
 	cst.p		gr10,@(gr11,gr0)	,cc3,#1
 	corcc		gr29,gr29,gr0		,cc3,#1
 	beq		icc3,#0,0b
-1:
 	bralr
 
 	.size		__cmpxchg_32, .-__cmpxchg_32
diff --git a/arch/frv/lib/atomic64-ops.S b/arch/frv/lib/atomic64-ops.S
new file mode 100644
index 00000000000..b6194eeac12
--- /dev/null
+++ b/arch/frv/lib/atomic64-ops.S
@@ -0,0 +1,162 @@
+/* kernel atomic64 operations
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ *   Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/spr-regs.h>
+
+	.text
+	.balign 4
+
+
+###############################################################################
+#
+# long long atomic64_inc_return(atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_inc_return
+        .type		atomic64_inc_return,@function
+atomic64_inc_return:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	addicc		gr9,#1,gr9,icc0
+	addxi		gr8,#0,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_inc_return, .-atomic64_inc_return
+
+###############################################################################
+#
+# long long atomic64_dec_return(atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_dec_return
+        .type		atomic64_dec_return,@function
+atomic64_dec_return:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	subicc		gr9,#1,gr9,icc0
+	subxi		gr8,#0,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_dec_return, .-atomic64_dec_return
+
+###############################################################################
+#
+# long long atomic64_add_return(long long i, atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_add_return
+        .type		atomic64_add_return,@function
+atomic64_add_return:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	addcc		gr9,gr5,gr9,icc0
+	addx		gr8,gr4,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_add_return, .-atomic64_add_return
+
+###############################################################################
+#
+# long long atomic64_sub_return(long long i, atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_sub_return
+        .type		atomic64_sub_return,@function
+atomic64_sub_return:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	subcc		gr9,gr5,gr9,icc0
+	subx		gr8,gr4,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_sub_return, .-atomic64_sub_return
+
+###############################################################################
+#
+# uint64_t __xchg_64(uint64_t i, uint64_t *v)
+#
+###############################################################################
+	.globl		__xchg_64
+        .type		__xchg_64,@function
+__xchg_64:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	cstd.p		gr4,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		__xchg_64, .-__xchg_64
+
+###############################################################################
+#
+# uint64_t __cmpxchg_64(uint64_t test, uint64_t new, uint64_t *v)
+#
+###############################################################################
+	.globl		__cmpxchg_64
+        .type		__cmpxchg_64,@function
+__cmpxchg_64:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr12,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3
+	subcc		gr8,gr4,gr0,icc0
+	subcc.p		gr9,gr5,gr0,icc1
+	bnelr		icc0,#0
+	bnelr		icc1,#0
+	cstd.p		gr10,@(gr12,gr0)	,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		__cmpxchg_64, .-__cmpxchg_64
+
diff --git a/arch/frv/lib/perf_counter.c b/arch/frv/lib/perf_counter.c
new file mode 100644
index 00000000000..2000feecd57
--- /dev/null
+++ b/arch/frv/lib/perf_counter.c
@@ -0,0 +1,19 @@
+/* Performance counter handling
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/perf_counter.h>
+
+/*
+ * mark the performance counter as pending
+ */
+void set_perf_counter_pending(void)
+{
+}
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index 700014d2155..8bbc8b0ee45 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -36,7 +36,7 @@ struct thread_info {
 	.exec_domain =	&default_exec_domain,	\
 	.flags =	0,			\
 	.cpu =		0,			\
-	.preempt_count = 1,			\
+	.preempt_count = INIT_PREEMPT_COUNT,	\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index 58a7e46affd..e7cbaa02cd0 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -41,11 +41,6 @@ $(error Sorry, you need a newer version of the assember, one that is built from
 		ftp://ftp.hpl.hp.com/pub/linux-ia64/gas-030124.tar.gz)
 endif
 
-ifeq ($(call cc-version),0304)
-	cflags-$(CONFIG_ITANIUM)	+= -mtune=merced
-	cflags-$(CONFIG_MCKINLEY)	+= -mtune=mckinley
-endif
-
 KBUILD_CFLAGS += $(cflags-y)
 head-y := arch/ia64/kernel/head.o arch/ia64/kernel/init_task.o
 
diff --git a/arch/ia64/include/asm/bitops.h b/arch/ia64/include/asm/bitops.h
index e2ca8003733..57a2787bc9f 100644
--- a/arch/ia64/include/asm/bitops.h
+++ b/arch/ia64/include/asm/bitops.h
@@ -286,7 +286,7 @@ __test_and_clear_bit(int nr, volatile void * addr)
 {
 	__u32 *p = (__u32 *) addr + (nr >> 5);
 	__u32 m = 1 << (nr & 31);
-	int oldbitset = *p & m;
+	int oldbitset = (*p & m) != 0;
 
 	*p &= ~m;
 	return oldbitset;
diff --git a/arch/ia64/include/asm/fpu.h b/arch/ia64/include/asm/fpu.h
index 0c26157cffa..b6395ad1500 100644
--- a/arch/ia64/include/asm/fpu.h
+++ b/arch/ia64/include/asm/fpu.h
@@ -6,6 +6,8 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
 
+#include <linux/types.h>
+
 /* floating point status register: */
 #define FPSR_TRAP_VD	(1 << 0)	/* invalid op trap disabled */
 #define FPSR_TRAP_DD	(1 << 1)	/* denormal trap disabled */
diff --git a/arch/ia64/include/asm/pgalloc.h b/arch/ia64/include/asm/pgalloc.h
index b9ac1a6fc21..96a8d927db2 100644
--- a/arch/ia64/include/asm/pgalloc.h
+++ b/arch/ia64/include/asm/pgalloc.h
@@ -48,7 +48,7 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 {
 	quicklist_free(0, NULL, pud);
 }
-#define __pud_free_tlb(tlb, pud)	pud_free((tlb)->mm, pud)
+#define __pud_free_tlb(tlb, pud, address)	pud_free((tlb)->mm, pud)
 #endif /* CONFIG_PGTABLE_4 */
 
 static inline void
@@ -67,7 +67,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	quicklist_free(0, NULL, pmd);
 }
 
-#define __pmd_free_tlb(tlb, pmd)	pmd_free((tlb)->mm, pmd)
+#define __pmd_free_tlb(tlb, pmd, address)	pmd_free((tlb)->mm, pmd)
 
 static inline void
 pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte)
@@ -117,6 +117,6 @@ static inline void check_pgt_cache(void)
 	quicklist_trim(0, NULL, 25, 16);
 }
 
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+#define __pte_free_tlb(tlb, pte, address)	pte_free((tlb)->mm, pte)
 
 #endif				/* _ASM_IA64_PGALLOC_H */
diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h
index 0a9cc73d35c..8840a690d1e 100644
--- a/arch/ia64/include/asm/pgtable.h
+++ b/arch/ia64/include/asm/pgtable.h
@@ -155,7 +155,6 @@
 #include <linux/bitops.h>
 #include <asm/cacheflush.h>
 #include <asm/mmu_context.h>
-#include <asm/processor.h>
 
 /*
  * Next come the mappings that determine how mmap() protection bits
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
index ae6922626bf..8ce2e388e37 100644
--- a/arch/ia64/include/asm/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
@@ -48,7 +48,7 @@ struct thread_info {
 	.flags		= 0,			\
 	.cpu		= 0,			\
 	.addr_limit	= KERNEL_DS,		\
-	.preempt_count	= 0,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h
index 20d8a39680c..85d965cb19a 100644
--- a/arch/ia64/include/asm/tlb.h
+++ b/arch/ia64/include/asm/tlb.h
@@ -236,22 +236,22 @@ do {							\
 	__tlb_remove_tlb_entry(tlb, ptep, addr);	\
 } while (0)
 
-#define pte_free_tlb(tlb, ptep)				\
+#define pte_free_tlb(tlb, ptep, address)		\
 do {							\
 	tlb->need_flush = 1;				\
-	__pte_free_tlb(tlb, ptep);			\
+	__pte_free_tlb(tlb, ptep, address);		\
 } while (0)
 
-#define pmd_free_tlb(tlb, ptep)				\
+#define pmd_free_tlb(tlb, ptep, address)		\
 do {							\
 	tlb->need_flush = 1;				\
-	__pmd_free_tlb(tlb, ptep);			\
+	__pmd_free_tlb(tlb, ptep, address);		\
 } while (0)
 
-#define pud_free_tlb(tlb, pudp)				\
+#define pud_free_tlb(tlb, pudp, address)		\
 do {							\
 	tlb->need_flush = 1;				\
-	__pud_free_tlb(tlb, pudp);			\
+	__pud_free_tlb(tlb, pudp, address);		\
 } while (0)
 
 #endif /* _ASM_IA64_TLB_H */
diff --git a/arch/ia64/include/asm/xen/hypervisor.h b/arch/ia64/include/asm/xen/hypervisor.h
index e425227a418..88afb54501e 100644
--- a/arch/ia64/include/asm/xen/hypervisor.h
+++ b/arch/ia64/include/asm/xen/hypervisor.h
@@ -33,6 +33,7 @@
 #ifndef _ASM_IA64_XEN_HYPERVISOR_H
 #define _ASM_IA64_XEN_HYPERVISOR_H
 
+#include <linux/err.h>
 #include <xen/interface/xen.h>
 #include <xen/interface/version.h>	/* to compile feature.c */
 #include <xen/features.h>		/* to comiple xen-netfront.c */
diff --git a/arch/ia64/kernel/dma-mapping.c b/arch/ia64/kernel/dma-mapping.c
index 086a2aeb040..f2c1600da09 100644
--- a/arch/ia64/kernel/dma-mapping.c
+++ b/arch/ia64/kernel/dma-mapping.c
@@ -6,6 +6,16 @@ int iommu_detected __read_mostly;
 struct dma_map_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
+
+static int __init dma_init(void)
+{
+	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+
+	return 0;
+}
+fs_initcall(dma_init);
+
 struct dma_map_ops *dma_get_ops(struct device *dev)
 {
 	return dma_ops;
diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c
index ebf4e988e78..d5764a3d74a 100644
--- a/arch/ia64/kernel/esi.c
+++ b/arch/ia64/kernel/esi.c
@@ -65,7 +65,7 @@ static int __init esi_init (void)
 	}
 
 	if (!esi)
-		return -ENODEV;;
+		return -ENODEV;
 
 	systab = __va(esi);
 
diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 2d311864e35..8ebccb589e1 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -21,6 +21,7 @@ EXPORT_SYMBOL(csum_ipv6_magic);
 
 #include <asm/page.h>
 EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
 
 #ifdef CONFIG_VIRTUAL_MEM_MAP
 #include <linux/bootmem.h>
@@ -60,9 +61,6 @@ EXPORT_SYMBOL(__udivdi3);
 EXPORT_SYMBOL(__moddi3);
 EXPORT_SYMBOL(__umoddi3);
 
-#include <asm/page.h>
-EXPORT_SYMBOL(copy_page);
-
 #if defined(CONFIG_MD_RAID456) || defined(CONFIG_MD_RAID456_MODULE)
 extern void xor_ia64_2(void);
 extern void xor_ia64_3(void);
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index c48b03f2b61..dab4d393908 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -1072,6 +1072,10 @@ iosapic_init (unsigned long phys_addr, unsigned int gsi_base)
 	}
 
 	addr = ioremap(phys_addr, 0);
+	if (addr == NULL) {
+		spin_unlock_irqrestore(&iosapic_lock, flags);
+		return -ENOMEM;
+	}
 	ver = iosapic_version(addr);
 	if ((err = iosapic_check_gsi_range(gsi_base, ver))) {
 		iounmap(addr);
diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c
index 05695962fe4..f6b1ff0aea7 100644
--- a/arch/ia64/kernel/pci-dma.c
+++ b/arch/ia64/kernel/pci-dma.c
@@ -69,11 +69,6 @@ iommu_dma_init(void)
 
 int iommu_dma_supported(struct device *dev, u64 mask)
 {
-	struct dma_map_ops *ops = platform_dma_get_ops(dev);
-
-	if (ops->dma_supported)
-		return ops->dma_supported(dev, mask);
-
 	/* Copied from i386. Doesn't make much sense, because it will
 	   only work for pci_alloc_coherent.
 	   The caller just has to use GFP_DMA in this case. */
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index abce2468a40..f1782705b1f 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -5603,7 +5603,7 @@ pfm_interrupt_handler(int irq, void *arg)
  * /proc/perfmon interface, for debug only
  */
 
-#define PFM_PROC_SHOW_HEADER	((void *)nr_cpu_ids+1)
+#define PFM_PROC_SHOW_HEADER	((void *)(long)nr_cpu_ids+1)
 
 static void *
 pfm_proc_start(struct seq_file *m, loff_t *pos)
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 92c9689b7d9..9daa87fdb01 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -15,7 +15,6 @@
 #include <linux/mm.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
-#include <linux/smp_lock.h>
 #include <linux/user.h>
 #include <linux/security.h>
 #include <linux/audit.h>
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index 7053c55b764..e6676fca482 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -192,7 +192,7 @@ struct salinfo_platform_oemdata_parms {
 static void
 salinfo_work_to_do(struct salinfo_data *data)
 {
-	down_trylock(&data->mutex);
+	(void)(down_trylock(&data->mutex) ?: 0);
 	up(&data->mutex);
 }
 
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index bc80dff1df7..8f060352e12 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -372,6 +372,10 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 	retval = kobject_init_and_add(&all_cpu_cache_info[cpu].kobj,
 				      &cache_ktype_percpu_entry, &sys_dev->kobj,
 				      "%s", "cache");
+	if (unlikely(retval < 0)) {
+		cpu_cache_sysfs_exit(cpu);
+		return retval;
+	}
 
 	for (i = 0; i < all_cpu_cache_info[cpu].num_cache_leaves; i++) {
 		this_object = LEAF_KOBJECT_PTR(cpu,i);
@@ -385,7 +389,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 			}
 			kobject_put(&all_cpu_cache_info[cpu].kobj);
 			cpu_cache_sysfs_exit(cpu);
-			break;
+			return retval;
 		}
 		kobject_uevent(&(this_object->kobj), KOBJ_ADD);
 	}
diff --git a/arch/ia64/kvm/kvm_lib.c b/arch/ia64/kvm/kvm_lib.c
index a85cb611ecd..f1268b8e6f9 100644
--- a/arch/ia64/kvm/kvm_lib.c
+++ b/arch/ia64/kvm/kvm_lib.c
@@ -11,5 +11,11 @@
  *
  */
 #undef CONFIG_MODULES
+#include <linux/module.h>
+#undef CONFIG_KALLSYMS
+#undef EXPORT_SYMBOL
+#undef EXPORT_SYMBOL_GPL
+#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
 #include "../../../lib/vsprintf.c"
 #include "../../../lib/ctype.c"
diff --git a/arch/ia64/kvm/mmio.c b/arch/ia64/kvm/mmio.c
index 21f63fffc37..9bf55afd08d 100644
--- a/arch/ia64/kvm/mmio.c
+++ b/arch/ia64/kvm/mmio.c
@@ -247,7 +247,8 @@ void emulate_io_inst(struct kvm_vcpu *vcpu, u64 padr, u64 ma)
 		vcpu_get_fpreg(vcpu, inst.M9.f2, &v);
 		/* Write high word. FIXME: this is a kludge!  */
 		v.u.bits[1] &= 0x3ffff;
-		mmio_access(vcpu, padr + 8, &v.u.bits[1], 8, ma, IOREQ_WRITE);
+		mmio_access(vcpu, padr + 8, (u64 *)&v.u.bits[1], 8,
+			    ma, IOREQ_WRITE);
 		data = v.u.bits[0];
 		size = 3;
 	} else if (inst.M10.major == 7 && inst.M10.x6 == 0x3B) {
@@ -265,7 +266,8 @@ void emulate_io_inst(struct kvm_vcpu *vcpu, u64 padr, u64 ma)
 
 		/* Write high word.FIXME: this is a kludge!  */
 		v.u.bits[1] &= 0x3ffff;
-		mmio_access(vcpu, padr + 8, &v.u.bits[1], 8, ma, IOREQ_WRITE);
+		mmio_access(vcpu, padr + 8, (u64 *)&v.u.bits[1],
+			    8, ma, IOREQ_WRITE);
 		data = v.u.bits[0];
 		size = 3;
 	} else if (inst.M10.major == 7 && inst.M10.x6 == 0x31) {
diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index a8f84da04b4..bb862fb224f 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -130,7 +130,7 @@ static void collect_interruption(struct kvm_vcpu *vcpu)
 	if (vdcr & IA64_DCR_PP) {
 		vpsr |= IA64_PSR_PP;
 	} else {
-		vpsr &= ~IA64_PSR_PP;;
+		vpsr &= ~IA64_PSR_PP;
 	}
 
 	vcpu_set_psr(vcpu, vpsr);
@@ -594,11 +594,11 @@ static void set_pal_call_data(struct kvm_vcpu *vcpu)
 		p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
 		break;
 	case PAL_BRAND_INFO:
-		p->u.pal_data.gr29 = gr29;;
+		p->u.pal_data.gr29 = gr29;
 		p->u.pal_data.gr30 = kvm_trans_pal_call_args(vcpu, gr30);
 		break;
 	default:
-		p->u.pal_data.gr29 = gr29;;
+		p->u.pal_data.gr29 = gr29;
 		p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
 	}
 	p->u.pal_data.gr28 = gr28;
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index a2c6c15e476..cc406d064a0 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -406,7 +406,7 @@ void getreg(unsigned long regnum, unsigned long *val,
 	 * Now look at registers in [0-31] range and init correct UNAT
 	 */
 	addr = (unsigned long)regs;
-	unat = &regs->eml_unat;;
+	unat = &regs->eml_unat;
 
 	addr += gr_info[regnum];
 
@@ -461,7 +461,7 @@ void setreg(unsigned long regnum, unsigned long val,
 u64 vcpu_get_gr(struct kvm_vcpu *vcpu, unsigned long reg)
 {
 	struct kvm_pt_regs *regs = vcpu_regs(vcpu);
-	u64 val;
+	unsigned long val;
 
 	if (!reg)
 		return 0;
@@ -469,7 +469,7 @@ u64 vcpu_get_gr(struct kvm_vcpu *vcpu, unsigned long reg)
 	return val;
 }
 
-void vcpu_set_gr(struct kvm_vcpu *vcpu, u64 reg, u64 value, int nat)
+void vcpu_set_gr(struct kvm_vcpu *vcpu, unsigned long reg, u64 value, int nat)
 {
 	struct kvm_pt_regs *regs = vcpu_regs(vcpu);
 	long sof = (regs->cr_ifs) & 0x7f;
@@ -1072,7 +1072,7 @@ void kvm_ttag(struct kvm_vcpu *vcpu, INST64 inst)
 	vcpu_set_gr(vcpu, inst.M46.r1, tag, 0);
 }
 
-int vcpu_tpa(struct kvm_vcpu *vcpu, u64 vadr, u64 *padr)
+int vcpu_tpa(struct kvm_vcpu *vcpu, u64 vadr, unsigned long *padr)
 {
 	struct thash_data *data;
 	union ia64_isr visr, pt_isr;
diff --git a/arch/ia64/kvm/vcpu.h b/arch/ia64/kvm/vcpu.h
index 042af92ced8..360724d3ae6 100644
--- a/arch/ia64/kvm/vcpu.h
+++ b/arch/ia64/kvm/vcpu.h
@@ -686,14 +686,15 @@ static inline int highest_inservice_irq(struct kvm_vcpu *vcpu)
 	return highest_bits((int *)&(VMX(vcpu, insvc[0])));
 }
 
-extern void vcpu_get_fpreg(struct kvm_vcpu *vcpu, u64 reg,
+extern void vcpu_get_fpreg(struct kvm_vcpu *vcpu, unsigned long reg,
 					struct ia64_fpreg *val);
-extern void vcpu_set_fpreg(struct kvm_vcpu *vcpu, u64 reg,
+extern void vcpu_set_fpreg(struct kvm_vcpu *vcpu, unsigned long reg,
 					struct ia64_fpreg *val);
-extern u64 vcpu_get_gr(struct kvm_vcpu *vcpu, u64 reg);
-extern void vcpu_set_gr(struct kvm_vcpu *vcpu, u64 reg, u64 val, int nat);
-extern u64 vcpu_get_psr(struct kvm_vcpu *vcpu);
-extern void vcpu_set_psr(struct kvm_vcpu *vcpu, u64 val);
+extern u64 vcpu_get_gr(struct kvm_vcpu *vcpu, unsigned long reg);
+extern void vcpu_set_gr(struct kvm_vcpu *vcpu, unsigned long reg,
+			u64 val, int nat);
+extern unsigned long vcpu_get_psr(struct kvm_vcpu *vcpu);
+extern void vcpu_set_psr(struct kvm_vcpu *vcpu, unsigned long val);
 extern u64 vcpu_thash(struct kvm_vcpu *vcpu, u64 vadr);
 extern void vcpu_bsw0(struct kvm_vcpu *vcpu);
 extern void thash_vhpt_insert(struct kvm_vcpu *v, u64 pte,
diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c
index 4290a429bf7..20b3852f7a6 100644
--- a/arch/ia64/kvm/vtlb.c
+++ b/arch/ia64/kvm/vtlb.c
@@ -135,7 +135,7 @@ struct thash_data *__vtr_lookup(struct kvm_vcpu *vcpu, u64 va, int type)
 	u64 rid;
 
 	rid = vcpu_get_rr(vcpu, va);
-	rid = rid & RR_RID_MASK;;
+	rid = rid & RR_RID_MASK;
 	if (type == D_TLB) {
 		if (vcpu_quick_region_check(vcpu->arch.dtr_regions, va)) {
 			for (trp = (struct thash_data *)&vcpu->arch.dtrs, i = 0;
@@ -518,7 +518,7 @@ struct thash_data *vtlb_lookup(struct kvm_vcpu *v, u64 va, int is_data)
 
 	struct thash_cb *hcb = &v->arch.vtlb;
 
-	cch = __vtr_lookup(v, va, is_data);;
+	cch = __vtr_lookup(v, va, is_data);
 	if (cch)
 		return cch;
 
diff --git a/arch/ia64/lib/ip_fast_csum.S b/arch/ia64/lib/ip_fast_csum.S
index 1f86aeb2c94..620d9dc5220 100644
--- a/arch/ia64/lib/ip_fast_csum.S
+++ b/arch/ia64/lib/ip_fast_csum.S
@@ -96,20 +96,22 @@ END(ip_fast_csum)
 GLOBAL_ENTRY(csum_ipv6_magic)
 	ld4	r20=[in0],4
 	ld4	r21=[in1],4
-	dep	r15=in3,in2,32,16
+	zxt4	in2=in2
 	;;
 	ld4	r22=[in0],4
 	ld4	r23=[in1],4
-	mux1	r15=r15,@rev
+	dep	r15=in3,in2,32,16
 	;;
 	ld4	r24=[in0],4
 	ld4	r25=[in1],4
-	shr.u	r15=r15,16
+	mux1	r15=r15,@rev
 	add	r16=r20,r21
 	add	r17=r22,r23
+	zxt4	in4=in4
 	;;
 	ld4	r26=[in0],4
 	ld4	r27=[in1],4
+	shr.u	r15=r15,16
 	add	r18=r24,r25
 	add	r8=r16,r17
 	;;
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 729298f4b23..7de76dd352f 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -537,7 +537,7 @@ pcibios_align_resource (void *data, struct resource *res,
 /*
  * PCI BIOS setup, always defaults to SAL interface
  */
-char * __devinit
+char * __init
 pcibios_setup (char *str)
 {
 	return str;
diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
index 76645cf6ac5..25831c47c57 100644
--- a/arch/ia64/sn/kernel/io_common.c
+++ b/arch/ia64/sn/kernel/io_common.c
@@ -435,7 +435,8 @@ void sn_generate_path(struct pci_bus *pci_bus, char *address)
 	bricktype = MODULE_GET_BTYPE(moduleid);
 	if ((bricktype == L1_BRICKTYPE_191010) ||
 	    (bricktype == L1_BRICKTYPE_1932))
-			sprintf(address, "%s^%d", address, geo_slot(geoid));
+			sprintf(address + strlen(address), "^%d",
+						geo_slot(geoid));
 }
 
 void __devinit
diff --git a/arch/m32r/include/asm/pgalloc.h b/arch/m32r/include/asm/pgalloc.h
index f11a2b909cd..0fc73619897 100644
--- a/arch/m32r/include/asm/pgalloc.h
+++ b/arch/m32r/include/asm/pgalloc.h
@@ -58,7 +58,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, addr)	pte_free((tlb)->mm, (pte))
 
 /*
  * allocating and freeing a pmd is trivial: the 1-entry pmd is
@@ -68,7 +68,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 
 #define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *)2); })
 #define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb, x)		do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr)	do { } while (0)
 #define pgd_populate(mm, pmd, pte)	BUG()
 
 #define check_pgt_cache()	do { } while (0)
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 8589d462df2..07bb5bd00e2 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -57,8 +57,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 
@@ -68,7 +66,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index bf0abe9e1f7..98b8feb12ed 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -19,7 +19,6 @@
 #include <linux/mm.h>
 #include <linux/err.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 6e562751ad5..6c74751c7b8 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -574,10 +574,11 @@ static int a2000_hwclk(int op, struct rtc_time *t)
 
 	tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD;
 
-	while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) {
+	while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
 		tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
 		udelay(70);
 		tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
+		--cnt;
 	}
 
 	if (!cnt)
@@ -649,10 +650,11 @@ static int amiga_set_clock_mmss(unsigned long nowtime)
 
 		tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
 
-		while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) {
+		while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
 			tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
 			udelay(70);
 			tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
+			--cnt;
 		}
 
 		if (!cnt)
diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h
index d08bf6261df..2f02f264e69 100644
--- a/arch/m68k/include/asm/motorola_pgalloc.h
+++ b/arch/m68k/include/asm/motorola_pgalloc.h
@@ -36,12 +36,10 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addres
 		return NULL;
 
 	pte = kmap(page);
-	if (pte) {
-		__flush_page_to_ram(pte);
-		flush_tlb_kernel_page(pte);
-		nocache_page(pte);
-	}
-	kunmap(pte);
+	__flush_page_to_ram(pte);
+	flush_tlb_kernel_page(pte);
+	nocache_page(pte);
+	kunmap(page);
 	pgtable_page_ctor(page);
 	return page;
 }
@@ -54,7 +52,8 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t page)
 	__free_page(page);
 }
 
-static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page)
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page,
+				  unsigned long address)
 {
 	pgtable_page_dtor(page);
 	cache_page(kmap(page));
@@ -73,7 +72,8 @@ static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	return free_pointer_table(pmd);
 }
 
-static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+				 unsigned long address)
 {
 	return free_pointer_table(pmd);
 }
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index 0b604f0f192..fe60e1abaee 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -135,8 +135,6 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
 #endif
 
 #ifndef __ASSEMBLY__
-#include <asm-generic/pgtable.h>
-
 /*
  * Macro to mark a page protection value as "uncacheable".
  */
@@ -154,6 +152,7 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
 	    ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S))	\
 	    : (prot)))
 
+#include <asm-generic/pgtable.h>
 #endif /* !__ASSEMBLY__ */
 
 /*
diff --git a/arch/m68k/include/asm/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h
index d4c83f14381..48d80d5a666 100644
--- a/arch/m68k/include/asm/sun3_pgalloc.h
+++ b/arch/m68k/include/asm/sun3_pgalloc.h
@@ -32,7 +32,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t page)
         __free_page(page);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,addr)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\
@@ -80,7 +80,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page
  * inside the pgd, so has no extra memory associated with it.
  */
 #define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb, x)		do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr)	do { } while (0)
 
 static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h
index af0fda46e94..6ea5c33b3c5 100644
--- a/arch/m68k/include/asm/thread_info_mm.h
+++ b/arch/m68k/include/asm/thread_info_mm.h
@@ -19,6 +19,7 @@ struct thread_info {
 {						\
 	.task		= &tsk,			\
 	.exec_domain	= &default_exec_domain,	\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h
index 82529f424ea..c2bde5e24b0 100644
--- a/arch/m68k/include/asm/thread_info_no.h
+++ b/arch/m68k/include/asm/thread_info_no.h
@@ -49,6 +49,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index aa29a8640f7..946d8691f2b 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -334,10 +334,12 @@
 #define __NR_inotify_init1	328
 #define __NR_preadv		329
 #define __NR_pwritev		330
+#define __NR_rt_tgsigqueueinfo	331
+#define __NR_perf_counter_open	332
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		331
+#define NR_syscalls		333
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 8744f60c07a..c3735cd6207 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -755,4 +755,6 @@ sys_call_table:
 	.long sys_inotify_init1
 	.long sys_preadv
 	.long sys_pwritev		/* 330 */
+	.long sys_rt_tgsigqueueinfo
+	.long sys_perf_counter_open
 
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 1e96c6eb631..8f8f4abab2f 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -290,7 +290,7 @@ void dump(struct pt_regs *fp)
 	unsigned char	*tp;
 	int		i;
 
-	printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\nCURRENT PROCESS:\n\n");
 	printk(KERN_EMERG "COMM=%s PID=%d\n", current->comm, current->pid);
 
 	if (current->mm) {
@@ -301,8 +301,7 @@ void dump(struct pt_regs *fp)
 			(int) current->mm->end_data,
 			(int) current->mm->end_data,
 			(int) current->mm->brk);
-		printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n"
-			KERN_EMERG "\n",
+		printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n\n",
 			(int) current->mm->start_stack,
 			(int)(((unsigned long) current) + THREAD_SIZE));
 	}
@@ -313,35 +312,35 @@ void dump(struct pt_regs *fp)
 		fp->d0, fp->d1, fp->d2, fp->d3);
 	printk(KERN_EMERG "d4: %08lx    d5: %08lx    a0: %08lx    a1: %08lx\n",
 		fp->d4, fp->d5, fp->a0, fp->a1);
-	printk(KERN_EMERG "\n" KERN_EMERG "USP: %08x   TRAPFRAME: %08x\n",
+	printk(KERN_EMERG "\nUSP: %08x   TRAPFRAME: %08x\n",
 		(unsigned int) rdusp(), (unsigned int) fp);
 
-	printk(KERN_EMERG "\n" KERN_EMERG "CODE:");
+	printk(KERN_EMERG "\nCODE:");
 	tp = ((unsigned char *) fp->pc) - 0x20;
 	for (sp = (unsigned long *) tp, i = 0; (i < 0x40);  i += 4) {
 		if ((i % 0x10) == 0)
-			printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+			printk(KERN_EMERG "%08x: ", (int) (tp + i));
 		printk("%08x ", (int) *sp++);
 	}
-	printk("\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\n");
 
 	printk(KERN_EMERG "KERNEL STACK:");
 	tp = ((unsigned char *) fp) - 0x40;
 	for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
 		if ((i % 0x10) == 0)
-			printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+			printk(KERN_EMERG "%08x: ", (int) (tp + i));
 		printk("%08x ", (int) *sp++);
 	}
-	printk("\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\n");
 
 	printk(KERN_EMERG "USER STACK:");
 	tp = (unsigned char *) (rdusp() - 0x10);
 	for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) {
 		if ((i % 0x10) == 0)
-			printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+			printk(KERN_EMERG "%08x: ", (int) (tp + i));
 		printk("%08x ", (int) *sp++);
 	}
-	printk("\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\n");
 }
 
 /*
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index c0b8782832f..0ae123e0898 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -349,6 +349,8 @@ ENTRY(sys_call_table)
 	.long sys_inotify_init1
 	.long sys_preadv
 	.long sys_pwritev		/* 330 */
+	.long sys_rt_tgsigqueueinfo
+	.long sys_perf_counter_open
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index 51d325343ab..3739c8f657d 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -111,7 +111,7 @@ static void print_this_address(unsigned long addr, int i)
 	if (i % 5)
 		printk(KERN_CONT " [%08lx] ", addr);
 	else
-		printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr);
+		printk(KERN_EMERG " [%08lx] ", addr);
 	i++;
 #endif
 }
@@ -137,8 +137,8 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
 		if (stack + 1 + i > endstack)
 			break;
 		if (i % 8 == 0)
-			printk("\n" KERN_EMERG "       ");
-		printk(" %08lx", *(stack + i));
+			printk(KERN_EMERG "       ");
+		printk(KERN_CONT " %08lx", *(stack + i));
 	}
 	printk("\n");
 	i = 0;
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index b50b845fdd5..2db722d80d4 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -53,6 +53,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 config GENERIC_GPIO
 	def_bool y
 
+config GENERIC_CSUM
+	def_bool y
+
 config PCI
 	def_bool n
 
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index d0bcf80a113..8439598d465 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -6,14 +6,16 @@ endif
 
 # What CPU vesion are we building for, and crack it open
 # as major.minor.rev
-CPU_VER=$(subst ",,$(CONFIG_XILINX_MICROBLAZE0_HW_VER) )
-CPU_MAJOR=$(shell echo $(CPU_VER) | cut -d '.' -f 1)
-CPU_MINOR=$(shell echo $(CPU_VER) | cut -d '.' -f 2)
-CPU_REV=$(shell echo $(CPU_VER) | cut -d '.' -f 3)
+CPU_VER   := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER))
+CPU_MAJOR := $(shell echo $(CPU_VER) | cut -d '.' -f 1)
+CPU_MINOR := $(shell echo $(CPU_VER) | cut -d '.' -f 2)
+CPU_REV   := $(shell echo $(CPU_VER) | cut -d '.' -f 3)
 
 export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
 
 # Use cpu-related CONFIG_ vars to set compile options.
+# The various CONFIG_XILINX cpu features options are integers 0/1/2...
+# rather than bools y/n
 
 # Work out HW multipler support.  This is icky.
 # 1. Spartan2 has no HW multiplers.
@@ -34,30 +36,29 @@ CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
 
 CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 
-# The various CONFIG_XILINX cpu features options are integers 0/1/2...
-# rather than bools y/n
-
 # r31 holds current when in kernel mode
-CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
+KBUILD_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
 
 LDFLAGS		:=
 LDFLAGS_vmlinux	:=
-LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
 
-LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(KBUILD_KERNEL) -print-libgcc-file-name)
 
-head-y		:= arch/microblaze/kernel/head.o
-libs-y		+= arch/microblaze/lib/ $(LIBGCC)
-core-y		+= arch/microblaze/kernel/ arch/microblaze/mm/ \
-		   arch/microblaze/platform/
+head-y := arch/microblaze/kernel/head.o
+libs-y += arch/microblaze/lib/
+libs-y += $(LIBGCC)
+core-y += arch/microblaze/kernel/
+core-y += arch/microblaze/mm/
+core-y += arch/microblaze/platform/
 
-boot := arch/$(ARCH)/boot
+boot := arch/microblaze/boot
 
 # defines filename extension depending memory management type
 ifeq ($(CONFIG_MMU),)
-MMUEXT		:= -nommu
+MMU := -nommu
 endif
-export	MMUEXT
+
+export MMU
 
 all: linux.bin
 
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
index bd0b85ec38f..09c32962b66 100644
--- a/arch/microblaze/configs/mmu_defconfig
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Fri May 22 10:02:33 2009
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 11:00:02 2009
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -18,7 +18,11 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CSUM=y
+# CONFIG_PCI is not set
+CONFIG_NO_DMA=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -59,8 +63,8 @@ CONFIG_INITRAMFS_ROOT_GID=0
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
 # CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
 # CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -71,7 +75,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -84,13 +87,22 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -102,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -194,9 +206,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Exectuable file formats
@@ -262,6 +274,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -325,7 +338,6 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -344,7 +356,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -410,6 +422,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -418,12 +435,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -433,22 +444,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -469,9 +465,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -485,12 +484,15 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -678,6 +680,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_KMEMCHECK is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_HEART_BEAT=y
 CONFIG_DEBUG_BOOTMEM=y
@@ -793,6 +796,5 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig
index 4ef6af0a8f3..8b638615a97 100644
--- a/arch/microblaze/configs/nommu_defconfig
+++ b/arch/microblaze/configs/nommu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Mon May 11 09:01:02 2009
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 10:35:30 2009
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -17,9 +17,12 @@ CONFIG_GENERIC_TIME=y
 # CONFIG_GENERIC_TIME_VSYSCALL is not set
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CSUM=y
 # CONFIG_PCI is not set
-# CONFIG_NO_DMA is not set
+CONFIG_NO_DMA=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -64,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -76,13 +78,23 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -95,7 +107,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,8 +168,16 @@ CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyUL0,115200"
 # CONFIG_CMDLINE_FORCE is not set
 CONFIG_OF=y
-CONFIG_OF_DEVICE=y
 CONFIG_PROC_DEVICETREE=y
+
+#
+# Advanced setup
+#
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_KERNEL_START=0x90000000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -169,7 +189,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
@@ -237,6 +257,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -254,7 +275,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -353,6 +378,7 @@ CONFIG_MTD_UCLINUX=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -364,6 +390,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
@@ -383,7 +410,6 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -402,7 +428,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -463,23 +489,25 @@ CONFIG_HW_RANDOM=y
 # CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_XILINX_HWICAP is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -489,22 +517,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -520,9 +533,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
@@ -543,9 +557,12 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -558,12 +575,15 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -813,6 +833,5 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h
index 0de612ad7cb..6d2e1d418be 100644
--- a/arch/microblaze/include/asm/atomic.h
+++ b/arch/microblaze/include/asm/atomic.h
@@ -1,95 +1,7 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
 #ifndef _ASM_MICROBLAZE_ATOMIC_H
 #define _ASM_MICROBLAZE_ATOMIC_H
 
-#include <linux/types.h>
-#include <linux/compiler.h> /* likely */
-#include <asm/system.h> /* local_irq_XXX and friends */
-
-#define ATOMIC_INIT(i)		{ (i) }
-#define atomic_read(v)		((v)->counter)
-#define atomic_set(v, i)	(((v)->counter) = (i))
-
-#define atomic_inc(v)		(atomic_add_return(1, (v)))
-#define atomic_dec(v)		(atomic_sub_return(1, (v)))
-
-#define atomic_add(i, v)	(atomic_add_return(i, (v)))
-#define atomic_sub(i, v)	(atomic_sub_return(i, (v)))
-
-#define atomic_inc_return(v)	(atomic_add_return(1, (v)))
-#define atomic_dec_return(v)	(atomic_sub_return(1, (v)))
-
-#define atomic_inc_and_test(v)	(atomic_add_return(1, (v)) == 0)
-#define atomic_dec_and_test(v)	(atomic_sub_return(1, (v)) == 0)
-
-#define atomic_inc_not_zero(v)	(atomic_add_unless((v), 1, 0))
-
-#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	int ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ret = v->counter;
-	if (likely(ret == old))
-		v->counter = new;
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-
-	c = atomic_read(v);
-	while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
-		c = old;
-	return c != u;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	*addr &= ~mask;
-	local_irq_restore(flags);
-}
-
-/**
- * atomic_add_return - add and return
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int val;
-
-	local_irq_save(flags);
-	val = v->counter;
-	v->counter = val += i;
-	local_irq_restore(flags);
-
-	return val;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	return atomic_add_return(-i, v);
-}
+#include <asm-generic/atomic.h>
 
 /*
  * Atomically test *v and decrement if it is greater than 0.
@@ -109,15 +21,4 @@ static inline int atomic_dec_if_positive(atomic_t *v)
 	return res;
 }
 
-#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic-long.h>
-
 #endif /* _ASM_MICROBLAZE_ATOMIC_H */
diff --git a/arch/microblaze/include/asm/bitops.h b/arch/microblaze/include/asm/bitops.h
index d6df1fd4e1e..a72468f15c8 100644
--- a/arch/microblaze/include/asm/bitops.h
+++ b/arch/microblaze/include/asm/bitops.h
@@ -1,27 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BITOPS_H
-#define _ASM_MICROBLAZE_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <asm/byteorder.h> /* swab32 */
-#include <asm/system.h> /* save_flags */
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
 #include <asm-generic/bitops.h>
-#include <asm-generic/bitops/__fls.h>
-
-#endif /* _ASM_MICROBLAZE_BITOPS_H */
diff --git a/arch/microblaze/include/asm/bug.h b/arch/microblaze/include/asm/bug.h
index 8eb2cdde11d..b12fd89e42e 100644
--- a/arch/microblaze/include/asm/bug.h
+++ b/arch/microblaze/include/asm/bug.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BUG_H
-#define _ASM_MICROBLAZE_BUG_H
-
-#include <linux/kernel.h>
 #include <asm-generic/bug.h>
-
-#endif /* _ASM_MICROBLAZE_BUG_H */
diff --git a/arch/microblaze/include/asm/bugs.h b/arch/microblaze/include/asm/bugs.h
index f2c6593653f..61791e1ad9f 100644
--- a/arch/microblaze/include/asm/bugs.h
+++ b/arch/microblaze/include/asm/bugs.h
@@ -1,17 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BUGS_H
-#define _ASM_MICROBLAZE_BUGS_H
-
-static inline void check_bugs(void)
-{
-	/* nothing to do */
-}
-
-#endif /* _ASM_MICROBLAZE_BUGS_H */
+#include <asm-generic/bugs.h>
diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h
index 97ea46b5cf8..128bf03b54b 100644
--- a/arch/microblaze/include/asm/checksum.h
+++ b/arch/microblaze/include/asm/checksum.h
@@ -10,12 +10,11 @@
 #ifndef _ASM_MICROBLAZE_CHECKSUM_H
 #define _ASM_MICROBLAZE_CHECKSUM_H
 
-#include <linux/in6.h>
-
 /*
  * computes the checksum of the TCP/UDP pseudo-header
  * returns a 16-bit checksum, already complemented
  */
+#define csum_tcpudp_nofold	csum_tcpudp_nofold
 static inline __wsum
 csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 		   unsigned short proto, __wsum sum)
@@ -30,71 +29,6 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 	return sum;
 }
 
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy(const void *src, void *dst, int len,
-								__wsum sum);
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
-					int len, __wsum sum, int *csum_err);
-
-#define csum_partial_copy_nocheck(src, dst, len, sum)	\
-	csum_partial_copy((src), (dst), (len), (sum))
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- *
- */
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- *	Fold a partial checksum
- */
-static inline __sum16 csum_fold(__wsum csum)
-{
-	u32 sum = (__force u32)csum;
-	sum = (sum & 0xffff) + (sum >> 16);
-	sum = (sum & 0xffff) + (sum >> 16);
-	return (__force __sum16)~sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-extern __sum16 ip_compute_csum(const void *buff, int len);
+#include <asm-generic/checksum.h>
 
 #endif /* _ASM_MICROBLAZE_CHECKSUM_H */
diff --git a/arch/microblaze/include/asm/fb.h b/arch/microblaze/include/asm/fb.h
new file mode 100644
index 00000000000..3a4988e8df4
--- /dev/null
+++ b/arch/microblaze/include/asm/fb.h
@@ -0,0 +1 @@
+#include <asm-generic/fb.h>
diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h
index 0f2d6b013e1..cd1ac9aad56 100644
--- a/arch/microblaze/include/asm/hardirq.h
+++ b/arch/microblaze/include/asm/hardirq.h
@@ -9,21 +9,9 @@
 #ifndef _ASM_MICROBLAZE_HARDIRQ_H
 #define _ASM_MICROBLAZE_HARDIRQ_H
 
-#include <linux/cache.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/current.h>
-#include <linux/ptrace.h>
-
 /* should be defined in each interrupt controller driver */
 extern unsigned int get_irq(struct pt_regs *regs);
 
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-void ack_bad_irq(unsigned int irq);
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+#include <asm-generic/hardirq.h>
 
 #endif /* _ASM_MICROBLAZE_HARDIRQ_H */
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 5c173424d07..7c3ec13b44d 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -14,7 +14,6 @@
 #include <asm/byteorder.h>
 #include <asm/page.h>
 #include <linux/types.h>
-#include <asm/byteorder.h>
 #include <linux/mm.h>          /* Get struct page {...} */
 
 
diff --git a/arch/microblaze/include/asm/ioctls.h b/arch/microblaze/include/asm/ioctls.h
index 03582b24920..ec34c760665 100644
--- a/arch/microblaze/include/asm/ioctls.h
+++ b/arch/microblaze/include/asm/ioctls.h
@@ -1,91 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_IOCTLS_H
-#define _ASM_MICROBLAZE_IOCTLS_H
-
-#include <linux/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCTTYGSTRUCT	0x5426 /* For debugging only */
-#define TIOCSBRK	0x5427 /* BSD compatibility */
-#define TIOCCBRK	0x5428 /* BSD compatibility */
-#define TIOCGSID	0x5429 /* Return the session ID of FD */
-/* Get Pty Number (of pty-mux device) */
-#define TIOCGPTN	_IOR('T', 0x30, unsigned int)
-#define TIOCSPTLCK	_IOW('T', 0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX	0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR	0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D /* read serial port inline interrupt counts */
-
-#define	FIOQSIZE	0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		0
-#define TIOCPKT_FLUSHREAD	1
-#define TIOCPKT_FLUSHWRITE	2
-#define TIOCPKT_STOP		4
-#define TIOCPKT_START		8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT	0x01 /* Transmitter physically empty */
-
-#endif /* _ASM_MICROBLAZE_IOCTLS_H */
+#include <asm-generic/ioctls.h>
diff --git a/arch/microblaze/include/asm/ipcbuf.h b/arch/microblaze/include/asm/ipcbuf.h
index b056fa42065..84c7e51cb6d 100644
--- a/arch/microblaze/include/asm/ipcbuf.h
+++ b/arch/microblaze/include/asm/ipcbuf.h
@@ -1,36 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_IPCBUF_H
-#define _ASM_MICROBLAZE_IPCBUF_H
-
-/*
- * The user_ipc_perm structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm {
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* _ASM_MICROBLAZE_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index db515deaa72..90f050535eb 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -10,6 +10,7 @@
 #define _ASM_MICROBLAZE_IRQ_H
 
 #define NR_IRQS 32
+#include <asm-generic/irq.h>
 
 #include <linux/interrupt.h>
 
@@ -17,11 +18,6 @@ extern unsigned int nr_irq;
 
 #define NO_IRQ (-1)
 
-static inline int irq_canonicalize(int irq)
-{
-	return irq;
-}
-
 struct pt_regs;
 extern void do_IRQ(struct pt_regs *regs);
 
diff --git a/arch/microblaze/include/asm/mman.h b/arch/microblaze/include/asm/mman.h
index 4914b132944..8eebf89f5ab 100644
--- a/arch/microblaze/include/asm/mman.h
+++ b/arch/microblaze/include/asm/mman.h
@@ -1,25 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMAN_H
-#define _ASM_MICROBLAZE_MMAN_H
-
 #include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN	0x0100 /* stack-like segment */
-#define MAP_DENYWRITE	0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000 /* mark it as an executable */
-#define MAP_LOCKED	0x2000 /* pages are locked */
-#define MAP_NORESERVE	0x4000 /* don't check for reservations */
-#define MAP_POPULATE	0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000 /* do not block on IO */
-
-#define MCL_CURRENT	1 /* lock all current mappings */
-#define MCL_FUTURE	2 /* lock all future mappings */
-
-#endif /* _ASM_MICROBLAZE_MMAN_H */
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
index 66cad6a99d7..8d6a654ceff 100644
--- a/arch/microblaze/include/asm/mmu.h
+++ b/arch/microblaze/include/asm/mmu.h
@@ -12,12 +12,7 @@
 #define _ASM_MICROBLAZE_MMU_H
 
 # ifndef CONFIG_MMU
-#  ifndef __ASSEMBLY__
-typedef struct {
-	struct vm_list_struct	*vmlist;
-	unsigned long		end_brk;
-} mm_context_t;
-#  endif /* __ASSEMBLY__ */
+#  include <asm-generic/mmu.h>
 # else /* CONFIG_MMU */
 #  ifdef __KERNEL__
 #   ifndef __ASSEMBLY__
diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h
index 385fed16bbf..24eab1674d3 100644
--- a/arch/microblaze/include/asm/mmu_context.h
+++ b/arch/microblaze/include/asm/mmu_context.h
@@ -1,5 +1,5 @@
 #ifdef CONFIG_MMU
 # include "mmu_context_mm.h"
 #else
-# include "mmu_context_no.h"
+# include <asm-generic/mmu_context.h>
 #endif
diff --git a/arch/microblaze/include/asm/mmu_context_no.h b/arch/microblaze/include/asm/mmu_context_no.h
deleted file mode 100644
index ba556719015..00000000000
--- a/arch/microblaze/include/asm/mmu_context_no.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008-2009 PetaLogix
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
-#define _ASM_MICROBLAZE_MMU_CONTEXT_H
-
-# define init_new_context(tsk, mm)		({ 0; })
-
-# define enter_lazy_tlb(mm, tsk)		do {} while (0)
-# define change_mm_context(old, ctx, _pml4)	do {} while (0)
-# define destroy_context(mm)			do {} while (0)
-# define deactivate_mm(tsk, mm)			do {} while (0)
-# define switch_mm(prev, next, tsk)		do {} while (0)
-# define activate_mm(prev, next)		do {} while (0)
-
-#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/module.h b/arch/microblaze/include/asm/module.h
index 914565a9031..7be1347fce4 100644
--- a/arch/microblaze/include/asm/module.h
+++ b/arch/microblaze/include/asm/module.h
@@ -9,6 +9,8 @@
 #ifndef _ASM_MICROBLAZE_MODULE_H
 #define _ASM_MICROBLAZE_MODULE_H
 
+#include <asm-generic/module.h>
+
 /* Microblaze Relocations */
 #define R_MICROBLAZE_NONE 0
 #define R_MICROBLAZE_32 1
@@ -24,14 +26,6 @@
 /* Keep this the last entry. */
 #define R_MICROBLAZE_NUM 11
 
-struct mod_arch_specific {
-	int foo;
-};
-
-#define Elf_Shdr	Elf32_Shdr
-#define Elf_Sym		Elf32_Sym
-#define Elf_Ehdr	Elf32_Ehdr
-
 typedef struct { volatile int counter; } module_t;
 
 #endif /* _ASM_MICROBLAZE_MODULE_H */
diff --git a/arch/microblaze/include/asm/msgbuf.h b/arch/microblaze/include/asm/msgbuf.h
index 09dd9709721..809134c644a 100644
--- a/arch/microblaze/include/asm/msgbuf.h
+++ b/arch/microblaze/include/asm/msgbuf.h
@@ -1,31 +1 @@
-#ifndef _ASM_MICROBLAZE_MSGBUF_H
-#define _ASM_MICROBLAZE_MSGBUF_H
-
-/*
- * The msqid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime; /* last msgsnd time */
-	unsigned long __unused1;
-	__kernel_time_t msg_rtime; /* last msgrcv time */
-	unsigned long __unused2;
-	__kernel_time_t msg_ctime; /* last change time */
-	unsigned long __unused3;
-	unsigned long msg_cbytes; /* current number of bytes on queue */
-	unsigned long msg_qnum; /* number of messages in queue */
-	unsigned long msg_qbytes; /* max number of bytes on queue */
-	__kernel_pid_t msg_lspid; /* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid; /* last receive pid */
-	unsigned long __unused4;
-	unsigned long __unused5;
-};
-
-#endif /* _ASM_MICROBLAZE_MSGBUF_H */
+#include <asm-generic/msgbuf.h>
diff --git a/arch/microblaze/include/asm/param.h b/arch/microblaze/include/asm/param.h
index 8c538a49616..965d4542797 100644
--- a/arch/microblaze/include/asm/param.h
+++ b/arch/microblaze/include/asm/param.h
@@ -1,30 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_PARAM_H
-#define _ASM_MICROBLAZE_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ		CONFIG_HZ	/* internal kernel timer frequency */
-#define USER_HZ		100		/* for user interfaces in "ticks" */
-#define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
-#endif /* __KERNEL__ */
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* _ASM_MICROBLAZE_PARAM_H */
+#include <asm-generic/param.h>
diff --git a/arch/microblaze/include/asm/parport.h b/arch/microblaze/include/asm/parport.h
new file mode 100644
index 00000000000..cf252af6459
--- /dev/null
+++ b/arch/microblaze/include/asm/parport.h
@@ -0,0 +1 @@
+#include <asm-generic/parport.h>
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index ca03794cf3f..9f0df5faf2c 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -1 +1 @@
-#include <linux/io.h>
+#include <asm-generic/pci.h>
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
index 59a757e46ba..b0131da1387 100644
--- a/arch/microblaze/include/asm/pgalloc.h
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -180,7 +180,7 @@ extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
 	__free_page(ptepage);
 }
 
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, addr)	pte_free((tlb)->mm, (pte))
 
 #define pmd_populate(mm, pmd, pte)	(pmd_val(*(pmd)) = page_address(pte))
 
@@ -193,7 +193,7 @@ extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
  */
 #define pmd_alloc_one(mm, address)	({ BUG(); ((pmd_t *)2); })
 /*#define pmd_free(mm, x)			do { } while (0)*/
-#define __pmd_free_tlb(tlb, x)		do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr)	do { } while (0)
 #define pgd_populate(mm, pmd, pte)	BUG()
 
 extern int do_check_pgt_cache(int, int);
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index 4c57a586a98..cc3a4dfc3ea 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -185,6 +185,7 @@ static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
 
 /* Definitions for MicroBlaze. */
 #define	_PAGE_GUARDED	0x001	/* G: page is guarded from prefetch */
+#define _PAGE_FILE	0x001	/* when !present: nonlinear file mapping */
 #define _PAGE_PRESENT	0x002	/* software: PTE contains a translation */
 #define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
 #define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
@@ -320,8 +321,7 @@ static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
 static inline int pte_exec(pte_t pte)  { return pte_val(pte) & _PAGE_EXEC; }
 static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
 static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-/* FIXME */
-static inline int pte_file(pte_t pte)		{ return 0; }
+static inline int pte_file(pte_t pte)  { return pte_val(pte) & _PAGE_FILE; }
 
 static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
 static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
@@ -488,7 +488,7 @@ static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
 /* Encode and decode a nonlinear file mapping entry */
 #define PTE_FILE_MAX_BITS	29
 #define pte_to_pgoff(pte)	(pte_val(pte) >> 3)
-#define pgoff_to_pte(off)	((pte_t) { ((off) << 3) })
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 3) | _PAGE_FILE })
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h
index 8c758b231f3..0e15039673e 100644
--- a/arch/microblaze/include/asm/posix_types.h
+++ b/arch/microblaze/include/asm/posix_types.h
@@ -1,73 +1,9 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
 #ifndef _ASM_MICROBLAZE_POSIX_TYPES_H
 #define _ASM_MICROBLAZE_POSIX_TYPES_H
 
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long	__kernel_ino_t;
 typedef unsigned short	__kernel_mode_t;
-typedef unsigned int	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef int		__kernel_pid_t;
-typedef unsigned int	__kernel_ipc_pid_t;
-typedef unsigned int	__kernel_uid_t;
-typedef unsigned int	__kernel_gid_t;
-typedef unsigned long	__kernel_size_t;
-typedef long		__kernel_ssize_t;
-typedef int		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef int		__kernel_daddr_t;
-typedef char 		*__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-typedef unsigned int	__kernel_uid32_t;
-typedef unsigned int	__kernel_gid32_t;
-
-typedef unsigned int	__kernel_old_uid_t;
-typedef unsigned int	__kernel_old_gid_t;
-typedef unsigned int	__kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long	__kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
-	int	val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-	int	__val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef	__FD_SET
-#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-
-#undef	__FD_CLR
-#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-
-#undef	__FD_ISSET
-#define	__FD_ISSET(d, set)	(!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d)))
-
-#undef	__FD_ZERO
-#define __FD_ZERO(fdsetp) (memset(fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+#define __kernel_mode_t __kernel_mode_t
 
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#include <asm-generic/posix_types.h>
 
 #endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 20f7b3a926e..37e6f305a68 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -16,6 +16,18 @@
 #define _ASM_MICROBLAZE_PROM_H
 #ifdef __KERNEL__
 
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER		0xd00dfeed /* marker */
+#define OF_DT_BEGIN_NODE	0x1 /* Start of node, full name */
+#define OF_DT_END_NODE		0x2 /* End node */
+#define OF_DT_PROP		0x3 /* Property: name off, size, content */
+#define OF_DT_NOP		0x4 /* nop */
+#define OF_DT_END		0x9
+
+#define OF_DT_VERSION		0x10
+
+#ifndef __ASSEMBLY__
+
 #include <linux/types.h>
 #include <linux/proc_fs.h>
 #include <linux/platform_device.h>
@@ -29,16 +41,6 @@
 #define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
 #define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
 
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER		0xd00dfeed /* marker */
-#define OF_DT_BEGIN_NODE	0x1 /* Start of node, full name */
-#define OF_DT_END_NODE		0x2 /* End node */
-#define OF_DT_PROP		0x3 /* Property: name off, size, content */
-#define OF_DT_NOP		0x4 /* nop */
-#define OF_DT_END		0x9
-
-#define OF_DT_VERSION		0x10
-
 /*
  * This is what gets passed to the kernel by prom_init or kexec
  *
@@ -309,5 +311,6 @@ extern void __iomem *of_iomap(struct device_node *device, int index);
  */
 #include <linux/of.h>
 
+#endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_MICROBLAZE_PROM_H */
diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h
index 08ff1d049b4..35d786fe93a 100644
--- a/arch/microblaze/include/asm/scatterlist.h
+++ b/arch/microblaze/include/asm/scatterlist.h
@@ -1,28 +1 @@
-/*
- * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SCATTERLIST_H
-#define _ASM_MICROBLAZE_SCATTERLIST_H
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	dma_addr_t	dma_address;
-	unsigned int	offset;
-	unsigned int	length;
-};
-
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#define sg_dma_len(sg)          ((sg)->length)
-
-#define ISA_DMA_THRESHOLD (~0UL)
-
-#endif /* _ASM_MICROBLAZE_SCATTERLIST_H */
+#include <asm-generic/scatterlist.h>
diff --git a/arch/microblaze/include/asm/sembuf.h b/arch/microblaze/include/asm/sembuf.h
index b804ed71a57..7673b83cfef 100644
--- a/arch/microblaze/include/asm/sembuf.h
+++ b/arch/microblaze/include/asm/sembuf.h
@@ -1,34 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SEMBUF_H
-#define _ASM_MICROBLAZE_SEMBUF_H
-
-/*
- * The semid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime; /* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime; /* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems; /* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-
-#endif /* _ASM_MICROBLAZE_SEMBUF_H */
+#include <asm-generic/sembuf.h>
diff --git a/arch/microblaze/include/asm/serial.h b/arch/microblaze/include/asm/serial.h
index 39bfc8ce6af..a0cb0caff15 100644
--- a/arch/microblaze/include/asm/serial.h
+++ b/arch/microblaze/include/asm/serial.h
@@ -1,14 +1 @@
-/*
- * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SERIAL_H
-#define _ASM_MICROBLAZE_SERIAL_H
-
-# define BASE_BAUD (1843200 / 16)
-
-#endif /* _ASM_MICROBLAZE_SERIAL_H */
+#include <asm-generic/serial.h>
diff --git a/arch/microblaze/include/asm/shmbuf.h b/arch/microblaze/include/asm/shmbuf.h
index f829c584361..83c05fc2de3 100644
--- a/arch/microblaze/include/asm/shmbuf.h
+++ b/arch/microblaze/include/asm/shmbuf.h
@@ -1,42 +1 @@
-#ifndef _ASM_MICROBLAZE_SHMBUF_H
-#define _ASM_MICROBLAZE_SHMBUF_H
-
-/*
- * The shmid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm; /* operation perms */
-	size_t			shm_segsz; /* size of segment (bytes) */
-	__kernel_time_t		shm_atime; /* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime; /* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime; /* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid; /* pid of creator */
-	__kernel_pid_t		shm_lpid; /* pid of last operator */
-	unsigned long		shm_nattch; /* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _ASM_MICROBLAZE_SHMBUF_H */
+#include <asm-generic/shmbuf.h>
diff --git a/arch/microblaze/include/asm/shmparam.h b/arch/microblaze/include/asm/shmparam.h
index 9f5fc2b3b6a..93f30deb95d 100644
--- a/arch/microblaze/include/asm/shmparam.h
+++ b/arch/microblaze/include/asm/shmparam.h
@@ -1,6 +1 @@
-#ifndef _ASM_MICROBLAZE_SHMPARAM_H
-#define _ASM_MICROBLAZE_SHMPARAM_H
-
-#define SHMLBA	PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _ASM_MICROBLAZE_SHMPARAM_H */
+#include <asm-generic/shmparam.h>
diff --git a/arch/microblaze/include/asm/siginfo.h b/arch/microblaze/include/asm/siginfo.h
index f162911a8f5..0815d29d82e 100644
--- a/arch/microblaze/include/asm/siginfo.h
+++ b/arch/microblaze/include/asm/siginfo.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SIGINFO_H
-#define _ASM_MICROBLAZE_SIGINFO_H
-
-#include <linux/types.h>
 #include <asm-generic/siginfo.h>
-
-#endif /* _ASM_MICROBLAZE_SIGINFO_H */
diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/asm/signal.h
index 46bc2267d94..7b1573ce19d 100644
--- a/arch/microblaze/include/asm/signal.h
+++ b/arch/microblaze/include/asm/signal.h
@@ -1,165 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *	Yasushi SHOJI <yashi@atmark-techno.com>
- *	Tetsuya OHKAWA <tetsuya@atmark-techno.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SIGNAL_H
-#define _ASM_MICROBLAZE_SIGNAL_H
-
-#define SIGHUP		1
-#define SIGINT		2
-#define SIGQUIT		3
-#define SIGILL		4
-#define SIGTRAP		5
-#define SIGABRT		6
-#define SIGIOT		6
-#define SIGBUS		7
-#define SIGFPE		8
-#define SIGKILL		9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-# ifndef __ASSEMBLY__
-# include <linux/types.h>
-# include <asm-generic/signal-defs.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#  ifdef __KERNEL__
-/*
- * Most things should be clean enough to redefine this at will, if care
- * is taken to make libc match.
- */
-#  define _NSIG		64
-#  define _NSIG_BPW	32
-#  define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-	sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-
-#  include <asm/sigcontext.h>
-#  undef __HAVE_ARCH_SIG_BITOPS
-
-#  define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#  else /* !__KERNEL__ */
-
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#  define NSIG		32
-typedef unsigned long sigset_t;
-
-struct sigaction {
-	union {
-	__sighandler_t _sa_handler;
-	void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#  define sa_handler	_u._sa_handler
-#  define sa_sigaction	_u._sa_sigaction
-
-#  endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_SIGNAL_H */
+#include <asm-generic/signal.h>
diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h
index 82593686031..6b71384b9d8 100644
--- a/arch/microblaze/include/asm/socket.h
+++ b/arch/microblaze/include/asm/socket.h
@@ -1,69 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SOCKET_H
-#define _ASM_MICROBLAZE_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER	26
-#define SO_DETACH_FILTER	27
-
-#define SO_PEERNAME		28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#endif /* _ASM_MICROBLAZE_SOCKET_H */
+#include <asm-generic/socket.h>
diff --git a/arch/microblaze/include/asm/sockios.h b/arch/microblaze/include/asm/sockios.h
index 9fff57a701e..def6d4746ee 100644
--- a/arch/microblaze/include/asm/sockios.h
+++ b/arch/microblaze/include/asm/sockios.h
@@ -1,23 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SOCKIOS_H
-#define _ASM_MICROBLAZE_SOCKIOS_H
-
-#include <linux/ioctl.h>
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* _ASM_MICROBLAZE_SOCKIOS_H */
+#include <asm-generic/sockios.h>
diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h
index a15f77520bf..3dc90fa92c7 100644
--- a/arch/microblaze/include/asm/stat.h
+++ b/arch/microblaze/include/asm/stat.h
@@ -1,68 +1 @@
-/*
- * Microblaze stat structure
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef _ASM_MICROBLAZE_STAT_H
-#define _ASM_MICROBLAZE_STAT_H
-
-#include <linux/posix_types.h>
-
-#define STAT_HAVE_NSEC 1
-
-struct stat {
-	unsigned long	st_dev;
-	unsigned long	st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-	unsigned long	st_rdev;
-	unsigned long	__pad1;
-	long		st_size;
-	int		st_blksize;
-	int		__pad2;
-	long		st_blocks;
-	int		st_atime;
-	unsigned int	st_atime_nsec;
-	int		st_mtime;
-	unsigned int	st_mtime_nsec;
-	int		st_ctime;
-	unsigned int	st_ctime_nsec;
-	unsigned long	__unused4;
-	unsigned long	__unused5;
-};
-
-struct stat64 {
-	unsigned long long	st_dev;		/* Device.  */
-	unsigned long long	st_ino;		/* File serial number.  */
-	unsigned int		st_mode;	/* File mode.  */
-	unsigned int		st_nlink;	/* Link count.  */
-	unsigned int		st_uid;		/* User ID of the file's owner.  */
-	unsigned int		st_gid;		/* Group ID of the file's group. */
-	unsigned long long	st_rdev;	/* Device number, if device.  */
-	unsigned long long	__pad1;
-	long long		st_size;	/* Size of file, in bytes.  */
-	int			st_blksize;	/* Optimal block size for I/O.  */
-	int			__pad2;
-	long long		st_blocks;	/* Number 512-byte blocks allocated. */
-	int			st_atime;	/* Time of last access.  */
-	unsigned int		st_atime_nsec;
-	int			st_mtime;	/* Time of last modification.  */
-	unsigned int		st_mtime_nsec;
-	int			st_ctime;	/* Time of last status change.  */
-	unsigned int		st_ctime_nsec;
-	unsigned int		__unused4;
-	unsigned int		__unused5;
-};
-
-#endif /* _ASM_MICROBLAZE_STAT_H */
-
+#include <asm-generic/stat.h>
diff --git a/arch/microblaze/include/asm/swab.h b/arch/microblaze/include/asm/swab.h
index b375d7b65ad..7847e563ab6 100644
--- a/arch/microblaze/include/asm/swab.h
+++ b/arch/microblaze/include/asm/swab.h
@@ -1,8 +1 @@
-#ifndef _ASM_MICROBLAZE_SWAB_H
-#define _ASM_MICROBLAZE_SWAB_H
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#define __SWAB_64_THRU_32__
-#endif
-
-#endif /* _ASM_MICROBLAZE_SWAB_H */
+#include <asm-generic/swab.h>
diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h
index ddea9eb31f8..720761cc741 100644
--- a/arch/microblaze/include/asm/syscalls.h
+++ b/arch/microblaze/include/asm/syscalls.h
@@ -1,48 +1,8 @@
 #ifndef __ASM_MICROBLAZE_SYSCALLS_H
-#define __ASM_MICROBLAZE_SYSCALLS_H
-#ifdef __KERNEL__
 
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-#include <linux/signal.h>
+asmlinkage long sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
+#define sys_clone sys_clone
 
-/* FIXME will be removed */
-asmlinkage int sys_ipc(uint call, int first, int second,
-				int third, void *ptr, long fifth);
+#include <asm-generic/syscalls.h>
 
-struct pt_regs;
-asmlinkage int sys_vfork(struct pt_regs *regs);
-asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
-asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
-			char __user *__user *envp, struct pt_regs *regs);
-
-asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, unsigned long pgoff);
-
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, off_t offset);
-
-/* from signal.c */
-asmlinkage int sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs);
-
-asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
-		struct pt_regs *regs);
-
-asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act,
-		struct old_sigaction *oact);
-
-asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
-		struct sigaction __user *oact, size_t sigsetsize);
-
-asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
-		struct pt_regs *regs);
-
-asmlinkage int sys_sigreturn(struct pt_regs *regs);
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs);
-
-#endif /* __KERNEL__ */
 #endif /* __ASM_MICROBLAZE_SYSCALLS_H */
diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h
index c4e308850b5..b1ed6159066 100644
--- a/arch/microblaze/include/asm/system.h
+++ b/arch/microblaze/include/asm/system.h
@@ -13,6 +13,9 @@
 #include <asm/setup.h>
 #include <asm/irqflags.h>
 
+#include <asm-generic/cmpxchg.h>
+#include <asm-generic/cmpxchg-local.h>
+
 struct task_struct;
 struct thread_info;
 
diff --git a/arch/microblaze/include/asm/termbits.h b/arch/microblaze/include/asm/termbits.h
index a1b64bc4724..3935b106de7 100644
--- a/arch/microblaze/include/asm/termbits.h
+++ b/arch/microblaze/include/asm/termbits.h
@@ -1,203 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TERMBITS_H
-#define _ASM_MICROBLAZE_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag; /* input mode flags */
-	tcflag_t c_oflag; /* output mode flags */
-	tcflag_t c_cflag; /* control mode flags */
-	tcflag_t c_lflag; /* local mode flags */
-	cc_t c_line; /* line discipline */
-	cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct ktermios {
-	tcflag_t c_iflag; /* input mode flags */
-	tcflag_t c_oflag; /* output mode flags */
-	tcflag_t c_cflag; /* control mode flags */
-	tcflag_t c_lflag; /* local mode flags */
-	cc_t c_line; /* line discipline */
-	cc_t c_cc[NCCS]; /* control characters */
-	speed_t c_ispeed; /* input speed */
-	speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define NL0	0000000
-#define NL1	0000400
-#define CRDLY	0003000
-#define CR0	0000000
-#define CR1	0001000
-#define CR2	0002000
-#define CR3	0003000
-#define TABDLY	0014000
-#define TAB0	0000000
-#define TAB1	0004000
-#define TAB2	0010000
-#define TAB3	0014000
-#define XTABS	0014000
-#define BSDLY	0020000
-#define BS0	0000000
-#define BS1	0020000
-#define VTDLY	0040000
-#define VT0	0000000
-#define VT1	0040000
-#define FFDLY	0100000
-#define FF0	0000000
-#define FF1	0100000
-
-/* c_cflag bit meaning */
-
-#define CBAUD	0010017
-#define B0	0000000 /* hang up */
-#define B50	0000001
-#define B75	0000002
-#define B110	0000003
-#define B134	0000004
-#define B150	0000005
-#define B200	0000006
-#define B300	0000007
-#define B600	0000010
-#define B1200	0000011
-#define B1800	0000012
-#define B2400	0000013
-#define B4800	0000014
-#define B9600	0000015
-#define B19200	0000016
-#define B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define CS5	0000000
-#define CS6	0000020
-#define CS7	0000040
-#define CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX	0010000
-#define B57600	0010001
-#define B115200	0010002
-#define B230400	0010003
-#define B460800	0010004
-#define B500000	0010005
-#define B576000	0010006
-#define B921600	0010007
-#define BOTHER		0010000
-#define B1000000	0010010
-#define B1152000	0010011
-#define B1500000	0010012
-#define B2000000	0010013
-#define B2500000	0010014
-#define B3000000	0010015
-#define B3500000	0010016
-#define B4000000	0010017
-#define CIBAUD		002003600000 /* input baud rate (not used) */
-#define CMSPAR		010000000000 /* mark or space (stick) parity */
-#define CRTSCTS		020000000000 /* flow control */
-
-#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* _ASM_MICROBLAZE_TERMBITS_H */
+#include <asm-generic/termbits.h>
diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/asm/termios.h
index 47a46d1fbe2..280d78a9d96 100644
--- a/arch/microblaze/include/asm/termios.h
+++ b/arch/microblaze/include/asm/termios.h
@@ -1,88 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TERMIOS_H
-#define _ASM_MICROBLAZE_TERMIOS_H
-
-#include <linux/string.h>
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag; /* input mode flags */
-	unsigned short c_oflag; /* output mode flags */
-	unsigned short c_cflag; /* control mode flags */
-	unsigned short c_lflag; /* local mode flags */
-	unsigned char c_line; /* line discipline */
-	unsigned char c_cc[NCC]; /* control characters */
-};
-
-#ifdef __KERNEL__
-/*	intr=^C		quit=^|		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* Modem lines */
-
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-/* Line disciplines */
-
-#define N_TTY		0
-#define N_SLIP		1
-#define N_MOUSE		2
-#define N_PPP		3
-#define N_STRIP		4
-#define N_AX25		5
-#define N_X25		6 /* X.25 async */
-#define N_6PACK		7
-#define N_MASC		8 /* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964		9 /* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL	10 /* Reserved for Profibus <Dave@mvhi.com> */
-#define N_IRDA		11 /* Linux IR - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK	12 /* SMS block mode - for talking to GSM data cards
-				about SMS messages */
-#define N_HDLC		13 /* synchronous HDLC */
-#define N_SYNC_PPP	14
-#define N_HCI		15 /* Bluetooth HCI UART */
-
-#ifdef __KERNEL__
-
-#include <asm-generic/termios-base.h>
-
-#endif	/* __KERNEL__ */
-
-#endif /* _ASM_MICROBLAZE_TERMIOS_H */
+#include <asm-generic/termios.h>
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index 7fac4449844..6e92885d381 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -75,8 +75,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #define INIT_THREAD_INFO(tsk)			\
 {						\
@@ -84,7 +82,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/microblaze/include/asm/timex.h b/arch/microblaze/include/asm/timex.h
index 678525dc6d0..befcf3de553 100644
--- a/arch/microblaze/include/asm/timex.h
+++ b/arch/microblaze/include/asm/timex.h
@@ -9,10 +9,8 @@
 #ifndef _ASM_MICROBLAZE_TIMEX_H
 #define _ASM_MICROBLAZE_TIMEX_H
 
-#define CLOCK_TICK_RATE 1000 /* Timer input freq. */
-
-typedef unsigned long cycles_t;
+#include <asm-generic/timex.h>
 
-#define get_cycles()	(0)
+#define CLOCK_TICK_RATE 1000 /* Timer input freq. */
 
 #endif /* _ASM_TIMEX_H */
diff --git a/arch/microblaze/include/asm/tlb.h b/arch/microblaze/include/asm/tlb.h
index c472d280113..e8abd4a0349 100644
--- a/arch/microblaze/include/asm/tlb.h
+++ b/arch/microblaze/include/asm/tlb.h
@@ -11,7 +11,7 @@
 #ifndef _ASM_MICROBLAZE_TLB_H
 #define _ASM_MICROBLAZE_TLB_H
 
-#define tlb_flush(tlb)	do {} while (0)
+#define tlb_flush(tlb)	flush_tlb_mm((tlb)->mm)
 
 #include <asm-generic/tlb.h>
 
diff --git a/arch/microblaze/include/asm/types.h b/arch/microblaze/include/asm/types.h
index bebc018318f..b9e79bc580d 100644
--- a/arch/microblaze/include/asm/types.h
+++ b/arch/microblaze/include/asm/types.h
@@ -1,38 +1 @@
-/*
- * Copyright (C) Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TYPES_H
-#define _ASM_MICROBLAZE_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-
-#include <asm-generic/int-ll64.h>
-
-# ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#  ifdef __KERNEL__
-#  define BITS_PER_LONG 32
-
-/* Dma addresses are 32-bits wide. */
-
-typedef u32 dma_addr_t;
-
-#  endif/* __KERNEL__ */
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_TYPES_H */
+#include <asm-generic/types.h>
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 65adad61e7e..5431b4631a7 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -189,7 +189,7 @@ extern long strnlen_user(const char *src, long count);
 
 #define __put_user(x, ptr)						\
 ({									\
-	__typeof__(*(ptr)) __gu_val = x;				\
+	__typeof__(*(ptr)) volatile __gu_val = (x);			\
 	long __gu_err = 0;						\
 	switch (sizeof(__gu_val)) {					\
 	case 1:								\
diff --git a/arch/microblaze/include/asm/ucontext.h b/arch/microblaze/include/asm/ucontext.h
index 11f6bb3ae3a..9bc07b9f30f 100644
--- a/arch/microblaze/include/asm/ucontext.h
+++ b/arch/microblaze/include/asm/ucontext.h
@@ -1,22 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_UCONTEXT_H
-#define _ASM_MICROBLAZE_UCONTEXT_H
-
-#include <asm/sigcontext.h>
-
-struct ucontext {
-	unsigned long		uc_flags;
-	struct ucontext		*uc_link;
-	stack_t			uc_stack;
-	struct sigcontext	uc_mcontext;
-	sigset_t		uc_sigmask; /* mask last for extensibility */
-};
-
-#endif /* _ASM_MICROBLAZE_UCONTEXT_H */
+#include <asm-generic/ucontext.h>
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index b5e2f5fa5c5..0b852327c0e 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -380,8 +380,10 @@
 #define __NR_accept04		362 /* new */
 #define __NR_preadv		363 /* new */
 #define __NR_pwritev		364 /* new */
+#define __NR_rt_tgsigqueueinfo	365 /* new */
+#define __NR_perf_counter_open	366 /* new */
 
-#define __NR_syscalls		365
+#define __NR_syscalls		367
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
@@ -408,7 +410,7 @@
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGACTION
-/* #define __ARCH_WANT_SYS_RT_SIGSUSPEND */
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 /*
  * "Conditional" syscalls
diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h
index 8b137891791..89d82fd8fcf 100644
--- a/arch/microblaze/include/asm/vga.h
+++ b/arch/microblaze/include/asm/vga.h
@@ -1 +1 @@
-
+#include <asm-generic/vga.h>
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index f4a5e19a20e..d487729683d 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -17,4 +17,4 @@ obj-$(CONFIG_HEART_BEAT)	+= heartbeat.o
 obj-$(CONFIG_MODULES)		+= microblaze_ksyms.o module.o
 obj-$(CONFIG_MMU)		+= misc.o
 
-obj-y	+= entry$(MMUEXT).o
+obj-y	+= entry$(MMU).o
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
index 153f57c57b6..c259786e7fa 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
@@ -22,7 +22,7 @@
 
 #define CI(c, p) { ci->c = PVR_##p(pvr); }
 #define err_printk(x) \
-	early_printk("ERROR: Microblaze " x " - different for PVR and DTS\n");
+	early_printk("ERROR: Microblaze " x "-different for PVR and DTS\n");
 
 void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
 {
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c
index 450ca6bb828..adb448f93d5 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-static.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -18,7 +18,7 @@ static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
 static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
 
 #define err_printk(x) \
-	early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");
+	early_printk("ERROR: Microblaze " x "-different for kernel and DTS\n");
 
 void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
 {
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index a10bea119b9..c411c6757de 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -26,6 +26,8 @@ const struct cpu_ver_key cpu_ver_lookup[] = {
 	{"7.10.b", 0x09},
 	{"7.10.c", 0x0a},
 	{"7.10.d", 0x0b},
+	{"7.20.a", 0x0c},
+	{"7.20.b", 0x0d},
 	/* FIXME There is no keycode defined in MBV for these versions */
 	{"2.10.a", 0x10},
 	{"3.00.a", 0x20},
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index 1fce6b803f5..9083d85376a 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -551,30 +551,22 @@ no_work_pending:
 	rtid	r14, 0
 	nop
 
-sys_vfork_wrapper:
-	brid	sys_vfork
+sys_vfork:
+	brid	microblaze_vfork
 	addk	r5, r1, r0
 
-sys_clone_wrapper:
-	brid	sys_clone
+sys_clone:
+	brid	microblaze_clone
 	addk	r7, r1, r0
 
-sys_execve_wrapper:
-	brid	sys_execve
+sys_execve:
+	brid	microblaze_execve
 	addk	r8, r1, r0
 
-sys_sigreturn_wrapper:
-	brid	sys_sigreturn
-	addk	r5, r1, r0
-
 sys_rt_sigreturn_wrapper:
 	brid	sys_rt_sigreturn
 	addk	r5, r1, r0
 
-sys_sigsuspend_wrapper:
-	brid	sys_rt_sigsuspend
-	addk	r6, r1, r0
-
 sys_rt_sigsuspend_wrapper:
 	brid	sys_rt_sigsuspend
 	addk	r7, r1, r0
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 91a0e7b185d..c7353e79f4a 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -429,12 +429,11 @@ C_ENTRY(ret_from_fork):
 	brid	ret_from_trap;	/* Do normal trap return */
 	nop;
 
-C_ENTRY(sys_vfork_wrapper):
+C_ENTRY(sys_vfork):
+	brid	microblaze_vfork	/* Do real work (tail-call) */
 	la	r5, r1, PTO
-	brid	sys_vfork	/* Do real work (tail-call) */
-	nop
 
-C_ENTRY(sys_clone_wrapper):
+C_ENTRY(sys_clone):
 	bnei	r6, 1f;			/* See if child SP arg (arg 1) is 0. */
 	lwi	r6, r1, PTO+PT_R1;	/* If so, use paret's stack ptr */
 1:	la	r7, r1, PTO;			/* Arg 2: parent context */
@@ -444,20 +443,9 @@ C_ENTRY(sys_clone_wrapper):
 	brid	do_fork		/* Do real work (tail-call) */
 	nop;
 
-C_ENTRY(sys_execve_wrapper):
+C_ENTRY(sys_execve):
 	la	r8, r1, PTO;		/* add user context as 4th arg */
-	brid	sys_execve;	/* Do real work (tail-call).*/
-	nop;
-
-C_ENTRY(sys_sigsuspend_wrapper):
-	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	swi	r4, r1, PTO+PT_R4;
-	la	r6, r1, PTO;		/* add user context as 2nd arg */
-	bralid	r15, sys_sigsuspend; /* Do real work.*/
-	nop;
-	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	lwi	r4, r1, PTO+PT_R4;
-	bri ret_from_trap /* fall through will not work here due to align */
+	brid	microblaze_execve;	/* Do real work (tail-call).*/
 	nop;
 
 C_ENTRY(sys_rt_sigsuspend_wrapper):
@@ -471,18 +459,6 @@ C_ENTRY(sys_rt_sigsuspend_wrapper):
 	bri ret_from_trap /* fall through will not work here due to align */
 	nop;
 
-
-C_ENTRY(sys_sigreturn_wrapper):
-	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	swi	r4, r1, PTO+PT_R4;
-	la	r5, r1, PTO;		/* add user context as 1st arg */
-	brlid	r15, sys_sigreturn;	/* Do real work.*/
-	nop;
-	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	lwi	r4, r1, PTO+PT_R4;
-	bri ret_from_trap /* fall through will not work here due to align */
-	nop;
-
 C_ENTRY(sys_rt_sigreturn_wrapper):
 	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
 	swi	r4, r1, PTO+PT_R4;
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index e568d6ec621..e41c6ce2a7b 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -31,6 +31,7 @@
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/page.h>
+#include <asm/prom.h>		/* for OF_DT_HEADER */
 
 #ifdef CONFIG_MMU
 #include <asm/setup.h> /* COMMAND_LINE_SIZE */
@@ -54,11 +55,19 @@ ENTRY(_start)
 	andi	r1, r1, ~2
 	mts	rmsr, r1
 
-/* save fdt to kernel location */
-/* r7 stores pointer to fdt blob */
-	beqi	r7, no_fdt_arg
+/* r7 may point to an FDT, or there may be one linked in.
+   if it's in r7, we've got to save it away ASAP.
+   We ensure r7 points to a valid FDT, just in case the bootloader
+   is broken or non-existent */
+	beqi	r7, no_fdt_arg			/* NULL pointer?  don't copy */
+	lw	r11, r0, r7			/* Does r7 point to a */
+	rsubi	r11, r11, OF_DT_HEADER		/* valid FDT? */
+	beqi	r11, _prepare_copy_fdt
+	or	r7, r0, r0		/* clear R7 when not valid DTB */
+	bnei	r11, no_fdt_arg			/* No - get out of here */
+_prepare_copy_fdt:
 	or	r11, r0, r0 /* incremment */
-	ori	r4, r0, TOPHYS(_fdt_start) /* save bram context */
+	ori	r4, r0, TOPHYS(_fdt_start)
 	ori	r3, r0, (0x4000 - 4)
 _copy_fdt:
 	lw	r12, r7, r11 /* r12 = r7 + r11 */
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 9d591cd74fc..3288c973767 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -74,6 +74,7 @@
 
 #include <asm/mmu.h>
 #include <asm/pgtable.h>
+#include <asm/signal.h>
 #include <asm/asm-offsets.h>
 
 /* Helpful Macros */
@@ -428,19 +429,9 @@ handle_unaligned_ex:
 	mfs	r17, rbtr;	/* ESR[DS] set - return address in BTR */
 	nop
 _no_delayslot:
-#endif
-
-#ifdef CONFIG_MMU
-	/* Check if unaligned address is last on a 4k page */
-		andi	r5, r4, 0xffc
-		xori	r5, r5, 0xffc
-		bnei	r5, _unaligned_ex2
-	_unaligned_ex1:
-		RESTORE_STATE;
-/* Another page must be accessed or physical address not in page table */
-		bri	unaligned_data_trap
-
-	_unaligned_ex2:
+	/* jump to high level unaligned handler */
+	RESTORE_STATE;
+	bri	unaligned_data_trap
 #endif
 	andi	r6, r3, 0x3E0; /* Mask and extract the register operand */
 	srl	r6, r6; /* r6 >> 5 */
@@ -450,45 +441,6 @@ _no_delayslot:
 	srl	r6, r6;
 	/* Store the register operand in a temporary location */
 	sbi	r6, r0, TOPHYS(ex_reg_op);
-#ifdef CONFIG_MMU
-	/* Get physical address */
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	ori	r5, r0, CONFIG_KERNEL_START
-	cmpu	r5, r4, r5
-	bgti	r5, _unaligned_ex3
-	ori	r5, r0, swapper_pg_dir
-	bri	_unaligned_ex4
-
-	/* Get the PGD for the current thread. */
-_unaligned_ex3: /* user thread */
-	addi	r5 ,CURRENT_TASK, TOPHYS(0); /* get current task address */
-	lwi	r5, r5, TASK_THREAD + PGDIR
-_unaligned_ex4:
-	tophys(r5,r5)
-	BSRLI(r6,r4,20)			/* Create L1 (pgdir/pmd) address */
-	andi	r6, r6, 0xffc
-/* Assume pgdir aligned on 4K boundary, no need for "andi r5,r5,0xfffff003" */
-	or	r5, r5, r6
-	lwi	r6, r5, 0		/* Get L1 entry */
-	andi	r5, r6, 0xfffff000	/* Extract L2 (pte) base address. */
-	beqi	r5, _unaligned_ex1	/* Bail if no table */
-
-	tophys(r5,r5)
-	BSRLI(r6,r4,10)			/* Compute PTE address */
-	andi	r6, r6, 0xffc
-	andi	r5, r5, 0xfffff003
-	or	r5, r5, r6
-	lwi	r5, r5, 0		/* Get Linux PTE */
-
-	andi	r6, r5, _PAGE_PRESENT
-	beqi	r6, _unaligned_ex1	/* Bail if no page */
-
-	andi	r5, r5, 0xfffff000	/* Extract RPN */
-	andi	r4, r4, 0x00000fff	/* Extract offset */
-	or	r4, r4, r5		/* Create physical address */
-#endif /* CONFIG_MMU */
 
 	andi	r6, r3, 0x400; /* Extract ESR[S] */
 	bnei	r6, ex_sw;
@@ -959,15 +911,15 @@ _unaligned_data_exception:
 	andi	r6, r3, 0x800;	/* Extract ESR[W] - delay slot */
 ex_lw_vm:
 	beqid	r6, ex_lhw_vm;
-	lbui	r5, r4, 0;	/* Exception address in r4 - delay slot */
+load1:	lbui	r5, r4, 0;	/* Exception address in r4 - delay slot */
 /* Load a word, byte-by-byte from destination address and save it in tmp space*/
 	la	r6, r0, ex_tmp_data_loc_0;
 	sbi	r5, r6, 0;
-	lbui	r5, r4, 1;
+load2:	lbui	r5, r4, 1;
 	sbi	r5, r6, 1;
-	lbui	r5, r4, 2;
+load3:	lbui	r5, r4, 2;
 	sbi	r5, r6, 2;
-	lbui	r5, r4, 3;
+load4:	lbui	r5, r4, 3;
 	sbi	r5, r6, 3;
 	brid	ex_lw_tail_vm;
 /* Get the destination register value into r3 - delay slot */
@@ -977,7 +929,7 @@ ex_lhw_vm:
 	 * save it in tmp space */
 	la	r6, r0, ex_tmp_data_loc_0;
 	sbi	r5, r6, 0;
-	lbui	r5, r4, 1;
+load5:	lbui	r5, r4, 1;
 	sbi	r5, r6, 1;
 	lhui	r3, r6, 0;	/* Get the destination register value into r3 */
 ex_lw_tail_vm:
@@ -996,22 +948,53 @@ ex_sw_tail_vm:
 	swi	r3, r5, 0;	/* Get the word - delay slot */
 	/* Store the word, byte-by-byte into destination address */
 	lbui	r3, r5, 0;
-	sbi	r3, r4, 0;
+store1:	sbi	r3, r4, 0;
 	lbui	r3, r5, 1;
-	sbi	r3, r4, 1;
+store2:	sbi	r3, r4, 1;
 	lbui	r3, r5, 2;
-	sbi	r3, r4, 2;
+store3:	sbi	r3, r4, 2;
 	lbui	r3, r5, 3;
 	brid	ret_from_exc;
-	sbi	r3, r4, 3;	/* Delay slot */
+store4:	sbi	r3, r4, 3;	/* Delay slot */
 ex_shw_vm:
 	/* Store the lower half-word, byte-by-byte into destination address */
 	lbui	r3, r5, 2;
-	sbi	r3, r4, 0;
+store5:	sbi	r3, r4, 0;
 	lbui	r3, r5, 3;
 	brid	ret_from_exc;
-	sbi	r3, r4, 1;	/* Delay slot */
+store6:	sbi	r3, r4, 1;	/* Delay slot */
 ex_sw_end_vm:			/* Exception handling of store word, ends. */
+
+/* We have to prevent cases that get/put_user macros get unaligned pointer
+ * to bad page area. We have to find out which origin instruction caused it
+ * and called fixup for that origin instruction not instruction in unaligned
+ * handler */
+ex_unaligned_fixup:
+	ori	r5, r7, 0 /* setup pointer to pt_regs */
+	lwi	r6, r7, PT_PC; /* faulting address is one instruction above */
+	addik	r6, r6, -4 /* for finding proper fixup */
+	swi	r6, r7, PT_PC; /* a save back it to PT_PC */
+	addik	r7, r0, SIGSEGV
+	/* call bad_page_fault for finding aligned fixup, fixup address is saved
+	 * in PT_PC which is used as return address from exception */
+	la	r15, r0, ret_from_exc-8 /* setup return address */
+	brid	bad_page_fault
+	nop
+
+/* We prevent all load/store because it could failed any attempt to access */
+.section __ex_table,"a";
+	.word	load1,ex_unaligned_fixup;
+	.word	load2,ex_unaligned_fixup;
+	.word	load3,ex_unaligned_fixup;
+	.word	load4,ex_unaligned_fixup;
+	.word	load5,ex_unaligned_fixup;
+	.word	store1,ex_unaligned_fixup;
+	.word	store2,ex_unaligned_fixup;
+	.word	store3,ex_unaligned_fixup;
+	.word	store4,ex_unaligned_fixup;
+	.word	store5,ex_unaligned_fixup;
+	.word	store6,ex_unaligned_fixup;
+.previous;
 .end _unaligned_data_exception
 #endif /* CONFIG_MMU */
 
diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index b15605299a5..6eea6f92b84 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -12,6 +12,7 @@
 #include <linux/irq.h>
 #include <asm/page.h>
 #include <linux/io.h>
+#include <linux/bug.h>
 
 #include <asm/prom.h>
 #include <asm/irq.h>
@@ -130,6 +131,7 @@ void __init init_IRQ(void)
 		if (intc)
 			break;
 	}
+	BUG_ON(!intc);
 
 	intc_baseaddr = *(int *) of_get_property(intc, "reg", NULL);
 	intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE);
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
index f688ee93e3b..7d5ddd62d4d 100644
--- a/arch/microblaze/kernel/irq.c
+++ b/arch/microblaze/kernel/irq.c
@@ -30,15 +30,6 @@ unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
 }
 EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
 
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves.
- */
-void ack_bad_irq(unsigned int irq)
-{
-	printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq);
-}
-
 static u32 concurrent_irq;
 
 void do_IRQ(struct pt_regs *regs)
diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c
index 51414171326..5a45b1adfef 100644
--- a/arch/microblaze/kernel/module.c
+++ b/arch/microblaze/kernel/module.c
@@ -57,7 +57,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
 	Elf32_Sym *sym;
 	unsigned long int *location;
-	unsigned long int locoffs;
 	unsigned long int value;
 #if __GNUC__ < 4
 	unsigned long int old_value;
@@ -113,10 +112,12 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 			break;
 
 		case R_MICROBLAZE_64_PCREL:
-			locoffs = (location[0] & 0xFFFF) << 16 |
+#if __GNUC__ < 4
+			old_value = (location[0] & 0xFFFF) << 16 |
 				(location[1] & 0xFFFF);
-			value -= (unsigned long int)(location) + 4 +
-				locoffs;
+			value -= old_value;
+#endif
+			value -= (unsigned long int)(location) + 4;
 			location[0] = (location[0] & 0xFFFF0000) |
 					(value >> 16);
 			location[1] = (location[1] & 0xFFFF0000) |
@@ -125,6 +126,14 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 				value);
 			break;
 
+		case R_MICROBLAZE_32_PCREL_LO:
+			pr_debug("R_MICROBLAZE_32_PCREL_LO\n");
+			break;
+
+		case R_MICROBLAZE_64_NONE:
+			pr_debug("R_MICROBLAZE_NONE\n");
+			break;
+
 		case R_MICROBLAZE_NONE:
 			pr_debug("R_MICROBLAZE_NONE\n");
 			break;
@@ -133,7 +142,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 			printk(KERN_ERR "module %s: "
 				"Unknown relocation: %u\n",
 				module->name,
-				ELF32_R_TYPE(rela->r_info));
+				ELF32_R_TYPE(rela[i].r_info));
 			return -ENOEXEC;
 		}
 	}
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
index b86aa623e36..53ff39af6a5 100644
--- a/arch/microblaze/kernel/ptrace.c
+++ b/arch/microblaze/kernel/ptrace.c
@@ -27,7 +27,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/ptrace.h>
 #include <linux/signal.h>
 
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 8709bea0960..2a97bf513b6 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -138,8 +138,12 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	setup_early_printk(NULL);
 #endif
 
-	early_printk("Ramdisk addr 0x%08x, FDT 0x%08x\n", ram, fdt);
-	printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt);
+	early_printk("Ramdisk addr 0x%08x, ", ram);
+	if (fdt)
+		early_printk("FDT at 0x%08x\n", fdt);
+	else
+		early_printk("Compiled-in FDT at 0x%08x\n",
+					(unsigned int)_fdt_start);
 
 #ifdef CONFIG_MTD_UCLINUX
 	early_printk("Found romfs @ 0x%08x (0x%08x)\n",
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 4c0e6521b11..1c80e4fc40c 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -21,7 +21,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/errno.h>
@@ -45,91 +44,8 @@
 
 asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall);
 
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs)
-{
-	sigset_t saveset;
-
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->r3 = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset, 1))
-			return -EINTR;
-	}
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
-		struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's. */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->r3 = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset, 1))
-			return -EINTR;
-	}
-}
-
-asmlinkage int
-sys_sigaction(int sig, const struct old_sigaction *act,
-		struct old_sigaction *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-			__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-			__get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-			return -EFAULT;
-		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		__get_user(mask, &act->sa_mask);
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
 
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-			__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-			__put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-			return -EFAULT;
-		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-	}
-
-	return ret;
-}
-
-asmlinkage int
+asmlinkage long
 sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		struct pt_regs *regs)
 {
@@ -139,7 +55,6 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 /*
  * Do a signal return; undo the signal stack.
  */
-
 struct sigframe {
 	struct sigcontext sc;
 	unsigned long extramask[_NSIG_WORDS-1];
@@ -176,40 +91,7 @@ static int restore_sigcontext(struct pt_regs *regs,
 	return err;
 }
 
-asmlinkage int sys_sigreturn(struct pt_regs *regs)
-{
-	struct sigframe *frame =
-			(struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
-
-	sigset_t set;
-	int rval;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__get_user(set.sig[0], &frame->sc.oldmask)
-		|| (_NSIG_WORDS > 1
-		&& __copy_from_user(&set.sig[1], &frame->extramask,
-					sizeof(frame->extramask))))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->sc, &rval))
-		goto badframe;
-	return rval;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame =
 		(struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE);
@@ -324,21 +206,17 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	/* Set up to return from userspace. If provided, use a stub
 	 already in userspace. */
 	/* minus 8 is offset to cater for "rtsd r15,8" */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
-	} else {
-		/* addi r12, r0, __NR_sigreturn */
-		err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
-				frame->tramp + 0);
-		/* brki r14, 0x8 */
-		err |= __put_user(0xb9cc0008, frame->tramp + 1);
-
-		/* Return from sighandler will jump to the tramp.
-		 Negative 8 offset because return is rtsd r15, 8 */
-		regs->r15 = ((unsigned long)frame->tramp)-8;
-
-		__invalidate_cache_sigtramp((unsigned long)frame->tramp);
-	}
+	/* addi r12, r0, __NR_sigreturn */
+	err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
+			frame->tramp + 0);
+	/* brki r14, 0x8 */
+	err |= __put_user(0xb9cc0008, frame->tramp + 1);
+
+	/* Return from sighandler will jump to the tramp.
+	 Negative 8 offset because return is rtsd r15, 8 */
+	regs->r15 = ((unsigned long)frame->tramp)-8;
+
+	__invalidate_cache_sigtramp((unsigned long)frame->tramp);
 
 	if (err)
 		goto give_sigsegv;
@@ -405,7 +283,7 @@ do_restart:
  * OK, we're invoking a handler
  */
 
-static void
+static int
 handle_signal(unsigned long sig, struct k_sigaction *ka,
 		siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
 {
@@ -426,6 +304,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 		recalc_sigpending();
 		spin_unlock_irq(&current->sighand->siglock);
 	}
+	return 1;
 }
 
 /*
@@ -456,7 +335,9 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall)
 	if (kernel_mode(regs))
 		return 1;
 
-	if (!oldset)
+	if (current_thread_info()->status & TS_RESTORE_SIGMASK)
+		oldset = &current->saved_sigmask;
+	else
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -464,13 +345,31 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall)
 		/* Whee! Actually deliver the signal. */
 		if (in_syscall)
 			handle_restart(regs, &ka, 1);
-		handle_signal(signr, &ka, &info, oldset, regs);
+		if (handle_signal(signr, &ka, &info, oldset, regs)) {
+			/*
+			 * A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TS_RESTORE_SIGMASK flag.
+			 */
+			current_thread_info()->status &=
+			    ~TS_RESTORE_SIGMASK;
+		}
 		return 1;
 	}
 
 	if (in_syscall)
 		handle_restart(regs, NULL, 0);
 
+	/*
+	 * If there's no signal to deliver, we just put the saved sigmask
+	 * back.
+	 */
+	if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+
 	/* Did we come from a system call? */
 	return 0;
 }
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index 31905ff590b..b96f1682bb2 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -15,7 +15,6 @@
 #include <linux/errno.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
@@ -34,120 +33,21 @@
 #include <linux/unistd.h>
 
 #include <asm/syscalls.h>
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly. This will be remove with new toolchain.
- */
-asmlinkage int
-sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	ret = -EINVAL;
-	switch (call) {
-	case SEMOP:
-		ret = sys_semop(first, (struct sembuf *)ptr, second);
-		break;
-	case SEMGET:
-		ret = sys_semget(first, second, third);
-		break;
-	case SEMCTL:
-	{
-		union semun fourth;
-
-		if (!ptr)
-			break;
-		ret = (access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
-				|| (get_user(fourth.__pad, (void **)ptr)) ;
-		if (ret)
-			break;
-		ret = sys_semctl(first, second, third, fourth);
-		break;
-	}
-	case MSGSND:
-		ret = sys_msgsnd(first, (struct msgbuf *) ptr, second, third);
-		break;
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-
-			if (!ptr)
-				break;
-			ret = (access_ok(VERIFY_READ, ptr, sizeof(tmp))
-				? 0 : -EFAULT) || copy_from_user(&tmp,
-				(struct ipc_kludge *) ptr, sizeof(tmp));
-			if (ret)
-				break;
-			ret = sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp,
-					third);
-			break;
-			}
-		default:
-			ret = sys_msgrcv(first, (struct msgbuf *) ptr,
-					second, fifth, third);
-			break;
-		}
-		break;
-	case MSGGET:
-		ret = sys_msgget((key_t) first, second);
-		break;
-	case MSGCTL:
-		ret = sys_msgctl(first, second, (struct msqid_ds *) ptr);
-		break;
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = access_ok(VERIFY_WRITE, (ulong *) third,
-					sizeof(ulong)) ? 0 : -EFAULT;
-			if (ret)
-				break;
-			ret = do_shmat(first, (char *) ptr, second, &raddr);
-			if (ret)
-				break;
-			ret = put_user(raddr, (ulong *) third);
-			break;
-			}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				break;
-			ret = do_shmat(first, (char *) ptr, second,
-					(ulong *) third);
-			break;
-		}
-		break;
-	case SHMDT:
-		ret = sys_shmdt((char *)ptr);
-		break;
-	case SHMGET:
-		ret = sys_shmget(first, second, third);
-		break;
-	case SHMCTL:
-		ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
-		break;
-	}
-	return ret;
-}
 
-asmlinkage int sys_vfork(struct pt_regs *regs)
+asmlinkage long microblaze_vfork(struct pt_regs *regs)
 {
 	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1,
 						regs, 0, NULL, NULL);
 }
 
-asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs)
+asmlinkage long microblaze_clone(int flags, unsigned long stack, struct pt_regs *regs)
 {
 	if (!stack)
 		stack = regs->r1;
 	return do_fork(flags, stack, regs, 0, NULL, NULL);
 }
 
-asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
+asmlinkage long microblaze_execve(char __user *filenamei, char __user *__user *argv,
 			char __user *__user *envp, struct pt_regs *regs)
 {
 	int error;
@@ -163,8 +63,8 @@ out:
 	return error;
 }
 
-asmlinkage unsigned long
-sys_mmap2(unsigned long addr, size_t len,
+asmlinkage long
+sys_mmap2(unsigned long addr, unsigned long len,
 	unsigned long prot, unsigned long flags,
 	unsigned long fd, unsigned long pgoff)
 {
@@ -189,18 +89,18 @@ out:
 	return ret;
 }
 
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
 			unsigned long prot, unsigned long flags,
-			unsigned long fd, off_t offset)
+			unsigned long fd, off_t pgoff)
 {
 	int err = -EINVAL;
 
-	if (offset & ~PAGE_MASK) {
+	if (pgoff & ~PAGE_MASK) {
 		printk(KERN_INFO "no pagemask in mmap\r\n");
 		goto out;
 	}
 
-	err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+	err = sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
 out:
 	return err;
 }
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 376d1789f7c..457216097df 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -15,7 +15,7 @@ ENTRY(sys_call_table)
 	.long sys_creat
 	.long sys_link
 	.long sys_unlink		/* 10 */
-	.long sys_execve_wrapper
+	.long sys_execve
 	.long sys_chdir
 	.long sys_time
 	.long sys_mknod
@@ -71,12 +71,12 @@ ENTRY(sys_call_table)
 	.long sys_getppid
 	.long sys_getpgrp		/* 65 */
 	.long sys_setsid
-	.long sys_sigaction
+	.long sys_ni_syscall		/* sys_sigaction */
 	.long sys_sgetmask
 	.long sys_ssetmask
 	.long sys_setreuid		/* 70 */
 	.long sys_setregid
-	.long sys_sigsuspend_wrapper
+	.long sys_ni_syscall		/* sys_sigsuspend_wrapper */
 	.long sys_sigpending
 	.long sys_sethostname
 	.long sys_setrlimit		/* 75 */
@@ -121,10 +121,10 @@ ENTRY(sys_call_table)
 	.long sys_wait4
 	.long sys_swapoff		/* 115 */
 	.long sys_sysinfo
-	.long sys_ipc
+	.long sys_ni_syscall		/* old sys_ipc */
 	.long sys_fsync
-	.long sys_sigreturn_wrapper
-	.long sys_clone_wrapper		/* 120 */
+	.long sys_ni_syscall		/* sys_sigreturn_wrapper */
+	.long sys_clone		/* 120 */
 	.long sys_setdomainname
 	.long sys_newuname
 	.long sys_ni_syscall		/* modify_ldt */
@@ -194,7 +194,7 @@ ENTRY(sys_call_table)
 	.long sys_sendfile
 	.long sys_ni_syscall		/* reserved for streams1 */
 	.long sys_ni_syscall		/* reserved for streams2 */
-	.long sys_vfork_wrapper		/* 190 */
+	.long sys_vfork		/* 190 */
 	.long sys_getrlimit
 	.long sys_mmap2			/* mmap2 */
 	.long sys_truncate64
@@ -313,7 +313,7 @@ ENTRY(sys_call_table)
 	.long sys_fchmodat
 	.long sys_faccessat
 	.long sys_ni_syscall /* pselect6 */
-	.long sys_ni_syscall /* sys_ppoll */
+	.long sys_ppoll
 	.long sys_unshare		/* 310 */
 	.long sys_set_robust_list
 	.long sys_get_robust_list
@@ -369,3 +369,5 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall
 	.long sys_ni_syscall
 	.long sys_ni_syscall
+	.long sys_rt_tgsigqueueinfo	/* 365 */
+	.long sys_perf_counter_open
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index bdfa2f9f0c8..5499deae7fa 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -22,6 +22,7 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
+#include <linux/bug.h>
 #include <asm/cpuinfo.h>
 #include <asm/setup.h>
 #include <asm/prom.h>
@@ -234,6 +235,7 @@ void __init time_init(void)
 		if (timer)
 			break;
 	}
+	BUG_ON(!timer);
 
 	timer_baseaddr = *(int *) of_get_property(timer, "reg", NULL);
 	timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE);
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index 71c8cb6c9e4..b579db068c0 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -2,7 +2,7 @@
 # Makefile
 #
 
-lib-y :=  memset.o checksum.o
+lib-y :=  memset.o
 
 ifeq ($(CONFIG_OPT_LIB_ASM),y)
 lib-y += fastcopy.o
diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c
deleted file mode 100644
index f08e7459141..00000000000
--- a/arch/microblaze/lib/checksum.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- *
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		IP/TCP/UDP checksumming routines
- *
- * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
- *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- *		Tom May, <ftom@netcom.com>
- *		Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
- *		Lots of code moved from tcp.c and ip.c; see those files
- *		for more names.
- *
- * 03/02/96	Jes Sorensen, Andreas Schwab, Roman Hodek:
- *		Fixed some nasty bugs, causing some horrible crashes.
- *		A: At some points, the sum (%0) was used as
- *		length-counter instead of the length counter
- *		(%1). Thanks to Roman Hodek for pointing this out.
- *		B: GCC seems to mess up if one uses too many
- *		data-registers to hold input values and one tries to
- *		specify d0 and d1 as scratch registers. Letting gcc
- *		choose these registers itself solves the problem.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
- kills, so most of the assembly has to go. */
-
-#include <linux/module.h>
-#include <net/checksum.h>
-
-#include <asm/byteorder.h>
-
-static inline unsigned short from32to16(unsigned long x)
-{
-	/* add up 16-bit and 16-bit for 16+c bit */
-	x = (x & 0xffff) + (x >> 16);
-	/* add up carry.. */
-	x = (x & 0xffff) + (x >> 16);
-	return x;
-}
-
-static unsigned int do_csum(const unsigned char *buff, int len)
-{
-	int odd, count;
-	unsigned long result = 0;
-
-	if (len <= 0)
-		goto out;
-	odd = 1 & (unsigned long) buff;
-	if (odd) {
-		result = *buff;
-		len--;
-		buff++;
-	}
-	count = len >> 1;		/* nr of 16-bit words.. */
-	if (count) {
-		if (2 & (unsigned long) buff) {
-			result += *(unsigned short *) buff;
-			count--;
-			len -= 2;
-			buff += 2;
-		}
-		count >>= 1;		/* nr of 32-bit words.. */
-		if (count) {
-			unsigned long carry = 0;
-			do {
-				unsigned long w = *(unsigned long *) buff;
-				count--;
-				buff += 4;
-				result += carry;
-				result += w;
-				carry = (w > result);
-			} while (count);
-			result += carry;
-			result = (result & 0xffff) + (result >> 16);
-		}
-		if (len & 2) {
-			result += *(unsigned short *) buff;
-			buff += 2;
-		}
-	}
-	if (len & 1)
-		result += (*buff << 8);
-	result = from32to16(result);
-	if (odd)
-		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
-	return result;
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	return (__force __sum16)~do_csum(iph, ihl*4);
-}
-EXPORT_SYMBOL(ip_fast_csum);
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum wsum)
-{
-	unsigned int sum = (__force unsigned int)wsum;
-	unsigned int result = do_csum(buff, len);
-
-	/* add in old sum, and carry.. */
-	result += sum;
-	if (sum > result)
-		result += 1;
-	return (__force __wsum)result;
-}
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-	return (__force __sum16)~do_csum(buff, len);
-}
-EXPORT_SYMBOL(ip_compute_csum);
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len,
-						__wsum sum, int *csum_err)
-{
-	int missing;
-
-	missing = __copy_from_user(dst, src, len);
-	if (missing) {
-		memset(dst + len - missing, 0, missing);
-		*csum_err = -EFAULT;
-	} else
-		*csum_err = 0;
-
-	return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-__wsum
-csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
-{
-	memcpy(dst, src, len);
-	return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy);
diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
index 956607a63f4..d9d249a66ff 100644
--- a/arch/microblaze/mm/fault.c
+++ b/arch/microblaze/mm/fault.c
@@ -69,7 +69,7 @@ static int store_updates_sp(struct pt_regs *regs)
  * It is called from do_page_fault above and from some of the procedures
  * in traps.c.
  */
-static void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
+void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
 {
 	const struct exception_table_entry *fixup;
 /* MS: no context */
@@ -122,15 +122,10 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	}
 #endif /* CONFIG_KGDB */
 
-	if (in_atomic() || mm == NULL) {
-		/* FIXME */
-		if (kernel_mode(regs)) {
-			printk(KERN_EMERG
-				"Page fault in kernel mode - Oooou!!! pid %d\n",
-				current->pid);
-			_exception(SIGSEGV, regs, code, address);
-			return;
-		}
+	if (in_atomic() || !mm) {
+		if (kernel_mode(regs))
+			goto bad_area_nosemaphore;
+
 		/* in_atomic() in user mode is really bad,
 		   as is current->mm == NULL. */
 		printk(KERN_EMERG "Page fault in user mode with "
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index b5a701cd71e..f207f1a94db 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -80,15 +80,15 @@ void __init setup_memory(void)
 			memory_size = memory_end - memory_start;
 			PAGE_OFFSET = memory_start;
 			printk(KERN_INFO "%s: Main mem: 0x%x-0x%x, "
-				"size 0x%08x\n", __func__, memory_start,
-						memory_end, memory_size);
+				"size 0x%08x\n", __func__, (u32) memory_start,
+					(u32) memory_end, (u32) memory_size);
 			break;
 		}
 	}
 
 	if (!memory_start || !memory_end) {
 		panic("%s: Missing memory setting 0x%08x-0x%08x\n",
-			__func__, memory_start, memory_end);
+			__func__, (u32) memory_start, (u32) memory_end);
 	}
 
 	/* reservation of region where is the kernel */
@@ -130,13 +130,13 @@ void __init setup_memory(void)
 	 * (in case the address isn't page-aligned).
 	 */
 #ifndef CONFIG_MMU
-	map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)),
+	map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)klimit)),
 					min_low_pfn, max_low_pfn);
 #else
 	map_size = init_bootmem_node(&contig_page_data,
-		PFN_UP(TOPHYS((u32)_end)), min_low_pfn, max_low_pfn);
+		PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
 #endif
-	lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size);
+	lmb_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
 
 	/* free bootmem is whole main memory */
 	free_bootmem(memory_start, memory_size);
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8c4be1f301c..3ca0fe1a912 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -22,6 +22,26 @@ choice
 config MACH_ALCHEMY
 	bool "Alchemy processor based machines"
 
+config AR7
+	bool "Texas Instruments AR7"
+	select BOOT_ELF32
+	select DMA_NONCOHERENT
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select NO_EXCEPT_FILL
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select GENERIC_GPIO
+	select GCD
+	select VLYNQ
+	help
+	  Support for the Texas Instruments AR7 System-on-a-Chip
+	  family: TNETD7100, 7200 and 7300.
+
 config BASLER_EXCITE
 	bool "Basler eXcite smart camera"
 	select CEVT_R4K
@@ -209,7 +229,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_MIPS_CMP if BROKEN	# because SYNC_R4K is broken
+	select SYS_SUPPORTS_MIPS_CMP
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
 	help
@@ -247,6 +267,7 @@ config MACH_VR41XX
 	select CEVT_R4K
 	select CSRC_R4K
 	select SYS_HAS_CPU_VR41XX
+	select ARCH_REQUIRE_GPIOLIB
 
 config NXP_STB220
 	bool "NXP STB220 board"
@@ -1635,7 +1656,7 @@ config MIPS_APSP_KSPD
 config MIPS_CMP
 	bool "MIPS CMP framework support"
 	depends on SYS_SUPPORTS_MIPS_CMP
-	select SYNC_R4K if BROKEN
+	select SYNC_R4K
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_SCHED_SMT if SMP
 	select WEAK_ORDERING
@@ -2147,11 +2168,11 @@ menu "Power management options"
 
 config ARCH_HIBERNATION_POSSIBLE
 	def_bool y
-	depends on SYS_SUPPORTS_HOTPLUG_CPU
+	depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on SYS_SUPPORTS_HOTPLUG_CPU
+	depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
 
 source "kernel/power/Kconfig"
 
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 807572a6a4d..861da514a46 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -173,6 +173,13 @@ libs-y				+= arch/mips/fw/lib/
 #
 
 #
+# Texas Instruments AR7
+#
+core-$(CONFIG_AR7)		+= arch/mips/ar7/
+cflags-$(CONFIG_AR7)		+= -I$(srctree)/arch/mips/include/asm/mach-ar7
+load-$(CONFIG_AR7)		+= 0xffffffff94100000
+
+#
 # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
 #
 core-$(CONFIG_MACH_JAZZ)	+= arch/mips/jazz/
diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
index 8b5914d1241..e30e42add69 100644
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -1,7 +1,7 @@
 /*
  * MTX-1 platform devices registration
  *
- * Copyright (C) 2007, Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2007-2009, Florian Fainelli <florian@openwrt.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -142,7 +142,17 @@ static struct __initdata platform_device * mtx1_devs[] = {
 
 static int __init mtx1_register_devices(void)
 {
-	gpio_direction_input(207);
+	int rc;
+
+	rc = gpio_request(mtx1_gpio_button[0].gpio,
+					mtx1_gpio_button[0].desc);
+	if (rc < 0) {
+		printk(KERN_INFO "mtx1: failed to request %d\n",
+					mtx1_gpio_button[0].gpio);
+		goto out;
+	}
+	gpio_direction_input(mtx1_gpio_button[0].gpio);
+out:
 	return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
 }
 
diff --git a/arch/mips/ar7/Makefile b/arch/mips/ar7/Makefile
new file mode 100644
index 00000000000..26bc5da1899
--- /dev/null
+++ b/arch/mips/ar7/Makefile
@@ -0,0 +1,11 @@
+
+obj-y := \
+	prom.o \
+	setup.o \
+	memory.o \
+	irq.o \
+	time.o \
+	platform.o \
+	gpio.o \
+	clock.o
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c
new file mode 100644
index 00000000000..cc65c8eb391
--- /dev/null
+++ b/arch/mips/ar7/clock.c
@@ -0,0 +1,427 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gcd.h>
+#include <linux/io.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define BOOT_PLL_SOURCE_MASK	0x3
+#define CPU_PLL_SOURCE_SHIFT	16
+#define BUS_PLL_SOURCE_SHIFT	14
+#define USB_PLL_SOURCE_SHIFT	18
+#define DSP_PLL_SOURCE_SHIFT	22
+#define BOOT_PLL_SOURCE_AFE	0
+#define BOOT_PLL_SOURCE_BUS	0
+#define BOOT_PLL_SOURCE_REF	1
+#define BOOT_PLL_SOURCE_XTAL	2
+#define BOOT_PLL_SOURCE_CPU	3
+#define BOOT_PLL_BYPASS		0x00000020
+#define BOOT_PLL_ASYNC_MODE	0x02000000
+#define BOOT_PLL_2TO1_MODE	0x00008000
+
+#define TNETD7200_CLOCK_ID_CPU	0
+#define TNETD7200_CLOCK_ID_DSP	1
+#define TNETD7200_CLOCK_ID_USB	2
+
+#define TNETD7200_DEF_CPU_CLK	211000000
+#define TNETD7200_DEF_DSP_CLK	125000000
+#define TNETD7200_DEF_USB_CLK	48000000
+
+struct tnetd7300_clock {
+	u32 ctrl;
+#define PREDIV_MASK	0x001f0000
+#define PREDIV_SHIFT	16
+#define POSTDIV_MASK	0x0000001f
+	u32 unused1[3];
+	u32 pll;
+#define MUL_MASK	0x0000f000
+#define MUL_SHIFT	12
+#define PLL_MODE_MASK	0x00000001
+#define PLL_NDIV	0x00000800
+#define PLL_DIV		0x00000002
+#define PLL_STATUS	0x00000001
+	u32 unused2[3];
+};
+
+struct tnetd7300_clocks {
+	struct tnetd7300_clock bus;
+	struct tnetd7300_clock cpu;
+	struct tnetd7300_clock usb;
+	struct tnetd7300_clock dsp;
+};
+
+struct tnetd7200_clock {
+	u32 ctrl;
+	u32 unused1[3];
+#define DIVISOR_ENABLE_MASK 0x00008000
+	u32 mul;
+	u32 prediv;
+	u32 postdiv;
+	u32 postdiv2;
+	u32 unused2[6];
+	u32 cmd;
+	u32 status;
+	u32 cmden;
+	u32 padding[15];
+};
+
+struct tnetd7200_clocks {
+	struct tnetd7200_clock cpu;
+	struct tnetd7200_clock dsp;
+	struct tnetd7200_clock usb;
+};
+
+int ar7_cpu_clock = 150000000;
+EXPORT_SYMBOL(ar7_cpu_clock);
+int ar7_bus_clock = 125000000;
+EXPORT_SYMBOL(ar7_bus_clock);
+int ar7_dsp_clock;
+EXPORT_SYMBOL(ar7_dsp_clock);
+
+static void approximate(int base, int target, int *prediv,
+			int *postdiv, int *mul)
+{
+	int i, j, k, freq, res = target;
+	for (i = 1; i <= 16; i++)
+		for (j = 1; j <= 32; j++)
+			for (k = 1; k <= 32; k++) {
+				freq = abs(base / j * i / k - target);
+				if (freq < res) {
+					res = freq;
+					*mul = i;
+					*prediv = j;
+					*postdiv = k;
+				}
+			}
+}
+
+static void calculate(int base, int target, int *prediv, int *postdiv,
+	int *mul)
+{
+	int tmp_gcd, tmp_base, tmp_freq;
+
+	for (*prediv = 1; *prediv <= 32; (*prediv)++) {
+		tmp_base = base / *prediv;
+		tmp_gcd = gcd(target, tmp_base);
+		*mul = target / tmp_gcd;
+		*postdiv = tmp_base / tmp_gcd;
+		if ((*mul < 1) || (*mul >= 16))
+			continue;
+		if ((*postdiv > 0) & (*postdiv <= 32))
+			break;
+	}
+
+	if (base / *prediv * *mul / *postdiv != target) {
+		approximate(base, target, prediv, postdiv, mul);
+		tmp_freq = base / *prediv * *mul / *postdiv;
+		printk(KERN_WARNING
+		       "Adjusted requested frequency %d to %d\n",
+		       target, tmp_freq);
+	}
+
+	printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n",
+	       *prediv, *postdiv, *mul);
+}
+
+static int tnetd7300_dsp_clock(void)
+{
+	u32 didr1, didr2;
+	u8 rev = ar7_chip_rev();
+	didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18));
+	didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c));
+	if (didr2 & (1 << 23))
+		return 0;
+	if ((rev >= 0x23) && (rev != 0x57))
+		return 250000000;
+	if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22))
+	    > 4208000)
+		return 250000000;
+	return 0;
+}
+
+static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock,
+	u32 *bootcr, u32 bus_clock)
+{
+	int product;
+	int base_clock = AR7_REF_CLOCK;
+	u32 ctrl = readl(&clock->ctrl);
+	u32 pll = readl(&clock->pll);
+	int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1;
+	int postdiv = (ctrl & POSTDIV_MASK) + 1;
+	int divisor = prediv * postdiv;
+	int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1;
+
+	switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+	case BOOT_PLL_SOURCE_BUS:
+		base_clock = bus_clock;
+		break;
+	case BOOT_PLL_SOURCE_REF:
+		base_clock = AR7_REF_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_XTAL:
+		base_clock = AR7_XTAL_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_CPU:
+		base_clock = ar7_cpu_clock;
+		break;
+	}
+
+	if (*bootcr & BOOT_PLL_BYPASS)
+		return base_clock / divisor;
+
+	if ((pll & PLL_MODE_MASK) == 0)
+		return (base_clock >> (mul / 16 + 1)) / divisor;
+
+	if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) {
+		product = (mul & 1) ?
+			(base_clock * mul) >> 1 :
+			(base_clock * (mul - 1)) >> 2;
+		return product / divisor;
+	}
+
+	if (mul == 16)
+		return base_clock / divisor;
+
+	return base_clock * mul / divisor;
+}
+
+static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
+	u32 *bootcr, u32 frequency)
+{
+	int prediv, postdiv, mul;
+	int base_clock = ar7_bus_clock;
+
+	switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+	case BOOT_PLL_SOURCE_BUS:
+		base_clock = ar7_bus_clock;
+		break;
+	case BOOT_PLL_SOURCE_REF:
+		base_clock = AR7_REF_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_XTAL:
+		base_clock = AR7_XTAL_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_CPU:
+		base_clock = ar7_cpu_clock;
+		break;
+	}
+
+	calculate(base_clock, frequency, &prediv, &postdiv, &mul);
+
+	writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
+	msleep(1);
+	writel(4, &clock->pll);
+	while (readl(&clock->pll) & PLL_STATUS)
+		;
+	writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
+	msleep(75);
+}
+
+static void __init tnetd7300_init_clocks(void)
+{
+	u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+	struct tnetd7300_clocks *clocks =
+					ioremap_nocache(UR8_REGS_CLOCKS,
+					sizeof(struct tnetd7300_clocks));
+
+	ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
+		&clocks->bus, bootcr, AR7_AFE_CLOCK);
+
+	if (*bootcr & BOOT_PLL_ASYNC_MODE)
+		ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
+			&clocks->cpu, bootcr, AR7_AFE_CLOCK);
+	else
+		ar7_cpu_clock = ar7_bus_clock;
+
+	if (ar7_dsp_clock == 250000000)
+		tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp,
+			bootcr, ar7_dsp_clock);
+
+	iounmap(clocks);
+	iounmap(bootcr);
+}
+
+static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock,
+	int prediv, int postdiv, int postdiv2, int mul, u32 frequency)
+{
+	printk(KERN_INFO
+		"Clocks: base = %d, frequency = %u, prediv = %d, "
+		"postdiv = %d, postdiv2 = %d, mul = %d\n",
+		base, frequency, prediv, postdiv, postdiv2, mul);
+
+	writel(0, &clock->ctrl);
+	writel(DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F), &clock->prediv);
+	writel((mul - 1) & 0xF, &clock->mul);
+
+	while (readl(&clock->status) & 0x1)
+		; /* nop */
+
+	writel(DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F), &clock->postdiv);
+
+	writel(readl(&clock->cmden) | 1, &clock->cmden);
+	writel(readl(&clock->cmd) | 1, &clock->cmd);
+
+	while (readl(&clock->status) & 0x1)
+		; /* nop */
+
+	writel(DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F), &clock->postdiv2);
+
+	writel(readl(&clock->cmden) | 1, &clock->cmden);
+	writel(readl(&clock->cmd) | 1, &clock->cmd);
+
+	while (readl(&clock->status) & 0x1)
+		; /* nop */
+
+	writel(readl(&clock->ctrl) | 1, &clock->ctrl);
+}
+
+static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr)
+{
+	if (*bootcr & BOOT_PLL_ASYNC_MODE)
+		/* Async */
+		switch (clock_id) {
+		case TNETD7200_CLOCK_ID_DSP:
+			return AR7_REF_CLOCK;
+		default:
+			return AR7_AFE_CLOCK;
+		}
+	else
+		/* Sync */
+		if (*bootcr & BOOT_PLL_2TO1_MODE)
+			/* 2:1 */
+			switch (clock_id) {
+			case TNETD7200_CLOCK_ID_DSP:
+				return AR7_REF_CLOCK;
+			default:
+				return AR7_AFE_CLOCK;
+			}
+		else
+			/* 1:1 */
+			return AR7_REF_CLOCK;
+}
+
+
+static void __init tnetd7200_init_clocks(void)
+{
+	u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+	struct tnetd7200_clocks *clocks =
+					ioremap_nocache(AR7_REGS_CLOCKS,
+					sizeof(struct tnetd7200_clocks));
+	int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv;
+	int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv;
+	int usb_base, usb_mul, usb_prediv, usb_postdiv;
+
+	cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr);
+	dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr);
+
+	if (*bootcr & BOOT_PLL_ASYNC_MODE) {
+		printk(KERN_INFO "Clocks: Async mode\n");
+
+		printk(KERN_INFO "Clocks: Setting DSP clock\n");
+		calculate(dsp_base, TNETD7200_DEF_DSP_CLK,
+			&dsp_prediv, &dsp_postdiv, &dsp_mul);
+		ar7_bus_clock =
+			((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv;
+		tnetd7200_set_clock(dsp_base, &clocks->dsp,
+			dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
+			ar7_bus_clock);
+
+		printk(KERN_INFO "Clocks: Setting CPU clock\n");
+		calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
+			&cpu_postdiv, &cpu_mul);
+		ar7_cpu_clock =
+			((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv;
+		tnetd7200_set_clock(cpu_base, &clocks->cpu,
+			cpu_prediv, cpu_postdiv, -1, cpu_mul,
+			ar7_cpu_clock);
+
+	} else
+		if (*bootcr & BOOT_PLL_2TO1_MODE) {
+			printk(KERN_INFO "Clocks: Sync 2:1 mode\n");
+
+			printk(KERN_INFO "Clocks: Setting CPU clock\n");
+			calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
+				&cpu_postdiv, &cpu_mul);
+			ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul)
+								/ cpu_postdiv;
+			tnetd7200_set_clock(cpu_base, &clocks->cpu,
+				cpu_prediv, cpu_postdiv, -1, cpu_mul,
+				ar7_cpu_clock);
+
+			printk(KERN_INFO "Clocks: Setting DSP clock\n");
+			calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
+				&dsp_postdiv, &dsp_mul);
+			ar7_bus_clock = ar7_cpu_clock / 2;
+			tnetd7200_set_clock(dsp_base, &clocks->dsp,
+				dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
+				dsp_mul * 2, ar7_bus_clock);
+		} else {
+			printk(KERN_INFO "Clocks: Sync 1:1 mode\n");
+
+			printk(KERN_INFO "Clocks: Setting DSP clock\n");
+			calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
+				&dsp_postdiv, &dsp_mul);
+			ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul)
+								/ dsp_postdiv;
+			tnetd7200_set_clock(dsp_base, &clocks->dsp,
+				dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
+				dsp_mul * 2, ar7_bus_clock);
+
+			ar7_cpu_clock = ar7_bus_clock;
+		}
+
+	printk(KERN_INFO "Clocks: Setting USB clock\n");
+	usb_base = ar7_bus_clock;
+	calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv,
+		&usb_postdiv, &usb_mul);
+	tnetd7200_set_clock(usb_base, &clocks->usb,
+		usb_prediv, usb_postdiv, -1, usb_mul,
+		TNETD7200_DEF_USB_CLK);
+
+	ar7_dsp_clock = ar7_cpu_clock;
+
+	iounmap(clocks);
+	iounmap(bootcr);
+}
+
+int __init ar7_init_clocks(void)
+{
+	switch (ar7_chip_id()) {
+	case AR7_CHIP_7100:
+	case AR7_CHIP_7200:
+		tnetd7200_init_clocks();
+		break;
+	case AR7_CHIP_7300:
+		ar7_dsp_clock = tnetd7300_dsp_clock();
+		tnetd7300_init_clocks();
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+arch_initcall(ar7_init_clocks);
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
new file mode 100644
index 00000000000..74e14a3dbf4
--- /dev/null
+++ b/arch/mips/ar7/gpio.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-ar7/gpio.h>
+
+static const char *ar7_gpio_list[AR7_GPIO_MAX];
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	if (gpio >= AR7_GPIO_MAX)
+		return -EINVAL;
+
+	if (ar7_gpio_list[gpio])
+		return -EBUSY;
+
+	if (label)
+		ar7_gpio_list[gpio] = label;
+	else
+		ar7_gpio_list[gpio] = "busy";
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+	BUG_ON(!ar7_gpio_list[gpio]);
+	ar7_gpio_list[gpio] = NULL;
+}
+EXPORT_SYMBOL(gpio_free);
diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c
new file mode 100644
index 00000000000..c781556c44e
--- /dev/null
+++ b/arch/mips/ar7/irq.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define EXCEPT_OFFSET	0x80
+#define PACE_OFFSET	0xA0
+#define CHNLS_OFFSET	0x200
+
+#define REG_OFFSET(irq, reg)	((irq) / 32 * 0x4 + reg * 0x10)
+#define SEC_REG_OFFSET(reg)	(EXCEPT_OFFSET + reg * 0x8)
+#define SEC_SR_OFFSET		(SEC_REG_OFFSET(0))	/* 0x80 */
+#define CR_OFFSET(irq)		(REG_OFFSET(irq, 1))	/* 0x10 */
+#define SEC_CR_OFFSET		(SEC_REG_OFFSET(1))	/* 0x88 */
+#define ESR_OFFSET(irq)		(REG_OFFSET(irq, 2))	/* 0x20 */
+#define SEC_ESR_OFFSET		(SEC_REG_OFFSET(2))	/* 0x90 */
+#define ECR_OFFSET(irq)		(REG_OFFSET(irq, 3))	/* 0x30 */
+#define SEC_ECR_OFFSET		(SEC_REG_OFFSET(3))	/* 0x98 */
+#define PIR_OFFSET		(0x40)
+#define MSR_OFFSET		(0x44)
+#define PM_OFFSET(irq)		(REG_OFFSET(irq, 5))	/* 0x50 */
+#define TM_OFFSET(irq)		(REG_OFFSET(irq, 6))	/* 0x60 */
+
+#define REG(addr) ((u32 *)(KSEG1ADDR(AR7_REGS_IRQ) + addr))
+
+#define CHNL_OFFSET(chnl) (CHNLS_OFFSET + (chnl * 4))
+
+static int ar7_irq_base;
+
+static void ar7_unmask_irq(unsigned int irq)
+{
+	writel(1 << ((irq - ar7_irq_base) % 32),
+	       REG(ESR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_mask_irq(unsigned int irq)
+{
+	writel(1 << ((irq - ar7_irq_base) % 32),
+	       REG(ECR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_ack_irq(unsigned int irq)
+{
+	writel(1 << ((irq - ar7_irq_base) % 32),
+	       REG(CR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_unmask_sec_irq(unsigned int irq)
+{
+	writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ESR_OFFSET));
+}
+
+static void ar7_mask_sec_irq(unsigned int irq)
+{
+	writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ECR_OFFSET));
+}
+
+static void ar7_ack_sec_irq(unsigned int irq)
+{
+	writel(1 << (irq - ar7_irq_base - 40), REG(SEC_CR_OFFSET));
+}
+
+static struct irq_chip ar7_irq_type = {
+	.name = "AR7",
+	.unmask = ar7_unmask_irq,
+	.mask = ar7_mask_irq,
+	.ack = ar7_ack_irq
+};
+
+static struct irq_chip ar7_sec_irq_type = {
+	.name = "AR7",
+	.unmask = ar7_unmask_sec_irq,
+	.mask = ar7_mask_sec_irq,
+	.ack = ar7_ack_sec_irq,
+};
+
+static struct irqaction ar7_cascade_action = {
+	.handler = no_action,
+	.name = "AR7 cascade interrupt"
+};
+
+static void __init ar7_irq_init(int base)
+{
+	int i;
+	/*
+	 * Disable interrupts and clear pending
+	 */
+	writel(0xffffffff, REG(ECR_OFFSET(0)));
+	writel(0xff, REG(ECR_OFFSET(32)));
+	writel(0xffffffff, REG(SEC_ECR_OFFSET));
+	writel(0xffffffff, REG(CR_OFFSET(0)));
+	writel(0xff, REG(CR_OFFSET(32)));
+	writel(0xffffffff, REG(SEC_CR_OFFSET));
+
+	ar7_irq_base = base;
+
+	for (i = 0; i < 40; i++) {
+		writel(i, REG(CHNL_OFFSET(i)));
+		/* Primary IRQ's */
+		set_irq_chip_and_handler(base + i, &ar7_irq_type,
+					 handle_level_irq);
+		/* Secondary IRQ's */
+		if (i < 32)
+			set_irq_chip_and_handler(base + i + 40,
+						 &ar7_sec_irq_type,
+						 handle_level_irq);
+	}
+
+	setup_irq(2, &ar7_cascade_action);
+	setup_irq(ar7_irq_base, &ar7_cascade_action);
+	set_c0_status(IE_IRQ0);
+}
+
+void __init arch_init_irq(void)
+{
+	mips_cpu_irq_init();
+	ar7_irq_init(8);
+}
+
+static void ar7_cascade(void)
+{
+	u32 status;
+	int i, irq;
+
+	/* Primary IRQ's */
+	irq = readl(REG(PIR_OFFSET)) & 0x3f;
+	if (irq) {
+		do_IRQ(ar7_irq_base + irq);
+		return;
+	}
+
+	/* Secondary IRQ's are cascaded through primary '0' */
+	writel(1, REG(CR_OFFSET(irq)));
+	status = readl(REG(SEC_SR_OFFSET));
+	for (i = 0; i < 32; i++) {
+		if (status & 1) {
+			do_IRQ(ar7_irq_base + i + 40);
+			return;
+		}
+		status >>= 1;
+	}
+
+	spurious_interrupt();
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+	if (pending & STATUSF_IP7)		/* cpu timer */
+		do_IRQ(7);
+	else if (pending & STATUSF_IP2)		/* int0 hardware line */
+		ar7_cascade();
+	else
+		spurious_interrupt();
+}
diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c
new file mode 100644
index 00000000000..696c723dc6d
--- /dev/null
+++ b/arch/mips/ar7/memory.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/pfn.h>
+#include <linux/proc_fs.h>
+#include <linux/string.h>
+#include <linux/swap.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mips-boards/prom.h>
+
+static int __init memsize(void)
+{
+	u32 size = (64 << 20);
+	u32 *addr = (u32 *)KSEG1ADDR(AR7_SDRAM_BASE + size - 4);
+	u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end));
+	u32 *tmpaddr = addr;
+
+	while (tmpaddr > kernel_end) {
+		*tmpaddr = (u32)tmpaddr;
+		size >>= 1;
+		tmpaddr -= size >> 2;
+	}
+
+	do {
+		tmpaddr += size >> 2;
+		if (*tmpaddr != (u32)tmpaddr)
+			break;
+		size <<= 1;
+	} while (size < (64 << 20));
+
+	writel((u32)tmpaddr, &addr);
+
+	return size;
+}
+
+void __init prom_meminit(void)
+{
+	unsigned long pages;
+
+	pages = memsize() >> PAGE_SHIFT;
+	add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT,
+			  BOOT_MEM_RAM);
+}
+
+void __init prom_free_prom_memory(void)
+{
+	/* Nothing to free */
+}
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
new file mode 100644
index 00000000000..2ecab615593
--- /dev/null
+++ b/arch/mips/ar7/platform.c
@@ -0,0 +1,555 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/vlynq.h>
+#include <linux/leds.h>
+#include <linux/string.h>
+#include <linux/etherdevice.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/gpio.h>
+#include <asm/mach-ar7/prom.h>
+
+struct plat_vlynq_data {
+	struct plat_vlynq_ops ops;
+	int gpio_bit;
+	int reset_bit;
+};
+
+
+static int vlynq_on(struct vlynq_device *dev)
+{
+	int result;
+	struct plat_vlynq_data *pdata = dev->dev.platform_data;
+
+	result = gpio_request(pdata->gpio_bit, "vlynq");
+	if (result)
+		goto out;
+
+	ar7_device_reset(pdata->reset_bit);
+
+	result = ar7_gpio_disable(pdata->gpio_bit);
+	if (result)
+		goto out_enabled;
+
+	result = ar7_gpio_enable(pdata->gpio_bit);
+	if (result)
+		goto out_enabled;
+
+	result = gpio_direction_output(pdata->gpio_bit, 0);
+	if (result)
+		goto out_gpio_enabled;
+
+	msleep(50);
+
+	gpio_set_value(pdata->gpio_bit, 1);
+	msleep(50);
+
+	return 0;
+
+out_gpio_enabled:
+	ar7_gpio_disable(pdata->gpio_bit);
+out_enabled:
+	ar7_device_disable(pdata->reset_bit);
+	gpio_free(pdata->gpio_bit);
+out:
+	return result;
+}
+
+static void vlynq_off(struct vlynq_device *dev)
+{
+	struct plat_vlynq_data *pdata = dev->dev.platform_data;
+	ar7_gpio_disable(pdata->gpio_bit);
+	gpio_free(pdata->gpio_bit);
+	ar7_device_disable(pdata->reset_bit);
+}
+
+static struct resource physmap_flash_resource = {
+	.name = "mem",
+	.flags = IORESOURCE_MEM,
+	.start = 0x10000000,
+	.end = 0x107fffff,
+};
+
+static struct resource cpmac_low_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_MAC0,
+		.end = AR7_REGS_MAC0 + 0x7ff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 27,
+		.end = 27,
+	},
+};
+
+static struct resource cpmac_high_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_MAC1,
+		.end = AR7_REGS_MAC1 + 0x7ff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 41,
+		.end = 41,
+	},
+};
+
+static struct resource vlynq_low_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_VLYNQ0,
+		.end = AR7_REGS_VLYNQ0 + 0xff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 29,
+		.end = 29,
+	},
+	{
+		.name = "mem",
+		.flags = IORESOURCE_MEM,
+		.start = 0x04000000,
+		.end = 0x04ffffff,
+	},
+	{
+		.name = "devirq",
+		.flags = IORESOURCE_IRQ,
+		.start = 80,
+		.end = 111,
+	},
+};
+
+static struct resource vlynq_high_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_VLYNQ1,
+		.end = AR7_REGS_VLYNQ1 + 0xff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 33,
+		.end = 33,
+	},
+	{
+		.name = "mem",
+		.flags = IORESOURCE_MEM,
+		.start = 0x0c000000,
+		.end = 0x0cffffff,
+	},
+	{
+		.name = "devirq",
+		.flags = IORESOURCE_IRQ,
+		.start = 112,
+		.end = 143,
+	},
+};
+
+static struct resource usb_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_USB,
+		.end = AR7_REGS_USB + 0xff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 32,
+		.end = 32,
+	},
+	{
+		.name = "mem",
+		.flags = IORESOURCE_MEM,
+		.start = 0x03400000,
+		.end = 0x034001fff,
+	},
+};
+
+static struct physmap_flash_data physmap_flash_data = {
+	.width = 2,
+};
+
+static struct plat_cpmac_data cpmac_low_data = {
+	.reset_bit = 17,
+	.power_bit = 20,
+	.phy_mask = 0x80000000,
+};
+
+static struct plat_cpmac_data cpmac_high_data = {
+	.reset_bit = 21,
+	.power_bit = 22,
+	.phy_mask = 0x7fffffff,
+};
+
+static struct plat_vlynq_data vlynq_low_data = {
+	.ops.on = vlynq_on,
+	.ops.off = vlynq_off,
+	.reset_bit = 20,
+	.gpio_bit = 18,
+};
+
+static struct plat_vlynq_data vlynq_high_data = {
+	.ops.on = vlynq_on,
+	.ops.off = vlynq_off,
+	.reset_bit = 16,
+	.gpio_bit = 19,
+};
+
+static struct platform_device physmap_flash = {
+	.id = 0,
+	.name = "physmap-flash",
+	.dev.platform_data = &physmap_flash_data,
+	.resource = &physmap_flash_resource,
+	.num_resources = 1,
+};
+
+static u64 cpmac_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device cpmac_low = {
+	.id = 0,
+	.name = "cpmac",
+	.dev = {
+		.dma_mask = &cpmac_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &cpmac_low_data,
+	},
+	.resource = cpmac_low_res,
+	.num_resources = ARRAY_SIZE(cpmac_low_res),
+};
+
+static struct platform_device cpmac_high = {
+	.id = 1,
+	.name = "cpmac",
+	.dev = {
+		.dma_mask = &cpmac_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &cpmac_high_data,
+	},
+	.resource = cpmac_high_res,
+	.num_resources = ARRAY_SIZE(cpmac_high_res),
+};
+
+static struct platform_device vlynq_low = {
+	.id = 0,
+	.name = "vlynq",
+	.dev.platform_data = &vlynq_low_data,
+	.resource = vlynq_low_res,
+	.num_resources = ARRAY_SIZE(vlynq_low_res),
+};
+
+static struct platform_device vlynq_high = {
+	.id = 1,
+	.name = "vlynq",
+	.dev.platform_data = &vlynq_high_data,
+	.resource = vlynq_high_res,
+	.num_resources = ARRAY_SIZE(vlynq_high_res),
+};
+
+
+static struct gpio_led default_leds[] = {
+	{
+		.name = "status",
+		.gpio = 8,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led dsl502t_leds[] = {
+	{
+		.name = "status",
+		.gpio = 9,
+		.active_low = 1,
+	},
+	{
+		.name = "ethernet",
+		.gpio = 7,
+		.active_low = 1,
+	},
+	{
+		.name = "usb",
+		.gpio = 12,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led dg834g_leds[] = {
+	{
+		.name = "ppp",
+		.gpio = 6,
+		.active_low = 1,
+	},
+	{
+		.name = "status",
+		.gpio = 7,
+		.active_low = 1,
+	},
+	{
+		.name = "adsl",
+		.gpio = 8,
+		.active_low = 1,
+	},
+	{
+		.name = "wifi",
+		.gpio = 12,
+		.active_low = 1,
+	},
+	{
+		.name = "power",
+		.gpio = 14,
+		.active_low = 1,
+		.default_trigger = "default-on",
+	},
+};
+
+static struct gpio_led fb_sl_leds[] = {
+	{
+		.name = "1",
+		.gpio = 7,
+	},
+	{
+		.name = "2",
+		.gpio = 13,
+		.active_low = 1,
+	},
+	{
+		.name = "3",
+		.gpio = 10,
+		.active_low = 1,
+	},
+	{
+		.name = "4",
+		.gpio = 12,
+		.active_low = 1,
+	},
+	{
+		.name = "5",
+		.gpio = 9,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led fb_fon_leds[] = {
+	{
+		.name = "1",
+		.gpio = 8,
+	},
+	{
+		.name = "2",
+		.gpio = 3,
+		.active_low = 1,
+	},
+	{
+		.name = "3",
+		.gpio = 5,
+	},
+	{
+		.name = "4",
+		.gpio = 4,
+		.active_low = 1,
+	},
+	{
+		.name = "5",
+		.gpio = 11,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data ar7_led_data;
+
+static struct platform_device ar7_gpio_leds = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = &ar7_led_data,
+	}
+};
+
+static struct platform_device ar7_udc = {
+	.id = -1,
+	.name = "ar7_udc",
+	.resource = usb_res,
+	.num_resources = ARRAY_SIZE(usb_res),
+};
+
+static inline unsigned char char2hex(char h)
+{
+	switch (h) {
+	case '0': case '1': case '2': case '3': case '4':
+	case '5': case '6': case '7': case '8': case '9':
+		return h - '0';
+	case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
+		return h - 'A' + 10;
+	case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
+		return h - 'a' + 10;
+	default:
+		return 0;
+	}
+}
+
+static void cpmac_get_mac(int instance, unsigned char *dev_addr)
+{
+	int i;
+	char name[5], default_mac[ETH_ALEN], *mac;
+
+	mac = NULL;
+	sprintf(name, "mac%c", 'a' + instance);
+	mac = prom_getenv(name);
+	if (!mac) {
+		sprintf(name, "mac%c", 'a');
+		mac = prom_getenv(name);
+	}
+	if (!mac) {
+		random_ether_addr(default_mac);
+		mac = default_mac;
+	}
+	for (i = 0; i < 6; i++)
+		dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
+			char2hex(mac[i * 3 + 1]);
+}
+
+static void __init detect_leds(void)
+{
+	char *prid, *usb_prod;
+
+	/* Default LEDs	*/
+	ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
+	ar7_led_data.leds = default_leds;
+
+	/* FIXME: the whole thing is unreliable */
+	prid = prom_getenv("ProductID");
+	usb_prod = prom_getenv("usb_prod");
+
+	/* If we can't get the product id from PROM, use the default LEDs */
+	if (!prid)
+		return;
+
+	if (strstr(prid, "Fritz_Box_FON")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds);
+		ar7_led_data.leds = fb_fon_leds;
+	} else if (strstr(prid, "Fritz_Box_")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds);
+		ar7_led_data.leds = fb_sl_leds;
+	} else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB"))
+		&& usb_prod != NULL && strstr(usb_prod, "DSL-502T")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds);
+		ar7_led_data.leds = dsl502t_leds;
+	} else if (strstr(prid, "DG834")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
+		ar7_led_data.leds = dg834g_leds;
+	}
+}
+
+static int __init ar7_register_devices(void)
+{
+	int res;
+#ifdef CONFIG_SERIAL_8250
+	static struct uart_port uart_port[2];
+
+	memset(uart_port, 0, sizeof(struct uart_port) * 2);
+
+	uart_port[0].type = PORT_16550A;
+	uart_port[0].line = 0;
+	uart_port[0].irq = AR7_IRQ_UART0;
+	uart_port[0].uartclk = ar7_bus_freq() / 2;
+	uart_port[0].iotype = UPIO_MEM32;
+	uart_port[0].mapbase = AR7_REGS_UART0;
+	uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
+	uart_port[0].regshift = 2;
+	res = early_serial_setup(&uart_port[0]);
+	if (res)
+		return res;
+
+
+	/* Only TNETD73xx have a second serial port */
+	if (ar7_has_second_uart()) {
+		uart_port[1].type = PORT_16550A;
+		uart_port[1].line = 1;
+		uart_port[1].irq = AR7_IRQ_UART1;
+		uart_port[1].uartclk = ar7_bus_freq() / 2;
+		uart_port[1].iotype = UPIO_MEM32;
+		uart_port[1].mapbase = UR8_REGS_UART1;
+		uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
+		uart_port[1].regshift = 2;
+		res = early_serial_setup(&uart_port[1]);
+		if (res)
+			return res;
+	}
+#endif /* CONFIG_SERIAL_8250 */
+	res = platform_device_register(&physmap_flash);
+	if (res)
+		return res;
+
+	ar7_device_disable(vlynq_low_data.reset_bit);
+	res = platform_device_register(&vlynq_low);
+	if (res)
+		return res;
+
+	if (ar7_has_high_vlynq()) {
+		ar7_device_disable(vlynq_high_data.reset_bit);
+		res = platform_device_register(&vlynq_high);
+		if (res)
+			return res;
+	}
+
+	if (ar7_has_high_cpmac()) {
+		cpmac_get_mac(1, cpmac_high_data.dev_addr);
+		res = platform_device_register(&cpmac_high);
+		if (res)
+			return res;
+	} else {
+		cpmac_low_data.phy_mask = 0xffffffff;
+	}
+
+	cpmac_get_mac(0, cpmac_low_data.dev_addr);
+	res = platform_device_register(&cpmac_low);
+	if (res)
+		return res;
+
+	detect_leds();
+	res = platform_device_register(&ar7_gpio_leds);
+	if (res)
+		return res;
+
+	res = platform_device_register(&ar7_udc);
+
+	return res;
+}
+arch_initcall(ar7_register_devices);
diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c
new file mode 100644
index 00000000000..5ad6f1db656
--- /dev/null
+++ b/arch/mips/ar7/prom.c
@@ -0,0 +1,297 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Putting things on the screen/serial line using YAMONs facilities.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <asm/bootinfo.h>
+
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/prom.h>
+
+#define MAX_ENTRY 80
+
+struct env_var {
+	char *name;
+	char *value;
+};
+
+static struct env_var adam2_env[MAX_ENTRY];
+
+char *prom_getenv(const char *name)
+{
+	int i;
+	for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++)
+		if (!strcmp(name, adam2_env[i].name))
+			return adam2_env[i].value;
+
+	return NULL;
+}
+EXPORT_SYMBOL(prom_getenv);
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+static void  __init ar7_init_cmdline(int argc, char *argv[])
+{
+	char *cp;
+	int actr;
+
+	actr = 1; /* Always ignore argv[0] */
+
+	cp = &(arcs_cmdline[0]);
+	while (actr < argc) {
+		strcpy(cp, argv[actr]);
+		cp += strlen(argv[actr]);
+		*cp++ = ' ';
+		actr++;
+	}
+	if (cp != &(arcs_cmdline[0])) {
+		/* get rid of trailing space */
+		--cp;
+		*cp = '\0';
+	}
+}
+
+struct psbl_rec {
+	u32 psbl_size;
+	u32 env_base;
+	u32 env_size;
+	u32 ffs_base;
+	u32 ffs_size;
+};
+
+static __initdata char psp_env_version[] = "TIENV0.8";
+
+struct psp_env_chunk {
+	u8 num;
+	u8 ctrl;
+	u16 csum;
+	u8 len;
+	char data[11];
+} __attribute__ ((packed));
+
+struct psp_var_map_entry {
+	u8 num;
+	char *value;
+};
+
+static struct psp_var_map_entry psp_var_map[] = {
+	{ 1, "cpufrequency" },
+	{ 2, "memsize" },
+	{ 3, "flashsize" },
+	{ 4, "modetty0" },
+	{ 5, "modetty1" },
+	{ 8, "maca" },
+	{ 9, "macb" },
+	{ 28, "sysfrequency" },
+	{ 38, "mipsfrequency" },
+};
+
+/*
+
+Well-known variable (num is looked up in table above for matching variable name)
+Example: cpufrequency=211968000
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Name=Value pair in a single chunk
+Example: NAME=VALUE
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Name=Value pair in 2 chunks (len is the number of chunks)
+Example: bootloaderVersion=1.3.7.15
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Data is padded with 0xFF
+
+*/
+
+#define PSP_ENV_SIZE  4096
+
+static char psp_env_data[PSP_ENV_SIZE] = { 0, };
+
+static char * __init lookup_psp_var_map(u8 num)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(psp_var_map); i++)
+		if (psp_var_map[i].num == num)
+			return psp_var_map[i].value;
+
+	return NULL;
+}
+
+static void __init add_adam2_var(char *name, char *value)
+{
+	int i;
+	for (i = 0; i < MAX_ENTRY; i++) {
+		if (!adam2_env[i].name) {
+			adam2_env[i].name = name;
+			adam2_env[i].value = value;
+			return;
+		} else if (!strcmp(adam2_env[i].name, name)) {
+			adam2_env[i].value = value;
+			return;
+		}
+	}
+}
+
+static int __init parse_psp_env(void *psp_env_base)
+{
+	int i, n;
+	char *name, *value;
+	struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data;
+
+	memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE);
+
+	i = 1;
+	n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk);
+	while (i < n) {
+		if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n))
+			break;
+		value = chunks[i].data;
+		if (chunks[i].num) {
+			name = lookup_psp_var_map(chunks[i].num);
+		} else {
+			name = value;
+			value += strlen(name) + 1;
+		}
+		if (name)
+			add_adam2_var(name, value);
+		i += chunks[i].len;
+	}
+	return 0;
+}
+
+static void __init ar7_init_env(struct env_var *env)
+{
+	int i;
+	struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300));
+	void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
+
+	if (strcmp(psp_env, psp_env_version) == 0) {
+		parse_psp_env(psp_env);
+	} else {
+		for (i = 0; i < MAX_ENTRY; i++, env++)
+			if (env->name)
+				add_adam2_var(env->name, env->value);
+	}
+}
+
+static void __init console_config(void)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	char console_string[40];
+	int baud = 0;
+	char parity = '\0', bits = '\0', flow = '\0';
+	char *s, *p;
+
+	if (strstr(prom_getcmdline(), "console="))
+		return;
+
+#ifdef CONFIG_KGDB
+	if (!strstr(prom_getcmdline(), "nokgdb")) {
+		strcat(prom_getcmdline(), " console=kgdb");
+		kgdb_enabled = 1;
+		return;
+	}
+#endif
+
+	s = prom_getenv("modetty0");
+	if (s) {
+		baud = simple_strtoul(s, &p, 10);
+		s = p;
+		if (*s == ',')
+			s++;
+		if (*s)
+			parity = *s++;
+		if (*s == ',')
+			s++;
+		if (*s)
+			bits = *s++;
+		if (*s == ',')
+			s++;
+		if (*s == 'h')
+			flow = 'r';
+	}
+
+	if (baud == 0)
+		baud = 38400;
+	if (parity != 'n' && parity != 'o' && parity != 'e')
+		parity = 'n';
+	if (bits != '7' && bits != '8')
+		bits = '8';
+
+	if (flow == 'r')
+		sprintf(console_string, " console=ttyS0,%d%c%c%c", baud,
+			parity, bits, flow);
+	else
+		sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity,
+			bits);
+	strcat(prom_getcmdline(), console_string);
+#endif
+}
+
+void __init prom_init(void)
+{
+	ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
+	ar7_init_env((struct env_var *)fw_arg2);
+	console_config();
+}
+
+#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
+static inline unsigned int serial_in(int offset)
+{
+	return readl((void *)PORT(offset));
+}
+
+static inline void serial_out(int offset, int value)
+{
+	writel(value, (void *)PORT(offset));
+}
+
+char prom_getchar(void)
+{
+	while (!(serial_in(UART_LSR) & UART_LSR_DR))
+		;
+	return serial_in(UART_RX);
+}
+
+int prom_putchar(char c)
+{
+	while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0)
+		;
+	serial_out(UART_TX, c);
+	return 1;
+}
+
diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c
new file mode 100644
index 00000000000..39f6b5b9646
--- /dev/null
+++ b/arch/mips/ar7/setup.c
@@ -0,0 +1,93 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <linux/time.h>
+
+#include <asm/reboot.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/prom.h>
+
+static void ar7_machine_restart(char *command)
+{
+	u32 *softres_reg = ioremap(AR7_REGS_RESET +
+					  AR7_RESET_SOFTWARE, 1);
+	writel(1, softres_reg);
+}
+
+static void ar7_machine_halt(void)
+{
+	while (1)
+		;
+}
+
+static void ar7_machine_power_off(void)
+{
+	u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
+	u32 power_state = readl(power_reg) | (3 << 30);
+	writel(power_state, power_reg);
+	ar7_machine_halt();
+}
+
+const char *get_system_type(void)
+{
+	u16 chip_id = ar7_chip_id();
+	switch (chip_id) {
+	case AR7_CHIP_7300:
+		return "TI AR7 (TNETD7300)";
+	case AR7_CHIP_7100:
+		return "TI AR7 (TNETD7100)";
+	case AR7_CHIP_7200:
+		return "TI AR7 (TNETD7200)";
+	default:
+		return "TI AR7 (Unknown)";
+	}
+}
+
+static int __init ar7_init_console(void)
+{
+	return 0;
+}
+console_initcall(ar7_init_console);
+
+/*
+ * Initializes basic routines and structures pointers, memory size (as
+ * given by the bios and saves the command line.
+ */
+
+void __init plat_mem_setup(void)
+{
+	unsigned long io_base;
+
+	_machine_restart = ar7_machine_restart;
+	_machine_halt = ar7_machine_halt;
+	pm_power_off = ar7_machine_power_off;
+	panic_timeout = 3;
+
+	io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000);
+	if (!io_base)
+		panic("Can't remap IO base!\n");
+	set_io_port_base(io_base);
+
+	prom_meminit();
+
+	printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n",
+					get_system_type(),
+		ar7_chip_id(), ar7_chip_rev());
+}
diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c
new file mode 100644
index 00000000000..a1fba894daa
--- /dev/null
+++ b/arch/mips/ar7/time.c
@@ -0,0 +1,30 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/init.h>
+#include <linux/time.h>
+
+#include <asm/time.h>
+#include <asm/mach-ar7/ar7.h>
+
+void __init plat_time_init(void)
+{
+	mips_hpt_frequency = ar7_cpu_freq() / 2;
+}
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 7c0528b0e34..d6903c3f3d5 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -14,9 +14,5 @@ obj-y += dma-octeon.o flash_setup.o
 obj-y += octeon-memcpy.o
 
 obj-$(CONFIG_SMP)                     += smp.o
-obj-$(CONFIG_PCI)                     += pci-common.o
-obj-$(CONFIG_PCI)                     += pci.o
-obj-$(CONFIG_PCI)                     += pcie.o
-obj-$(CONFIG_PCI_MSI)                 += msi.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 627c162a615..4b92bfc662d 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -29,7 +29,7 @@
 #include <dma-coherence.h>
 
 #ifdef CONFIG_PCI
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
 #endif
 
 #define BAR2_PCI_ADDRESS 0x8000000000ul
diff --git a/arch/mips/cavium-octeon/pci-common.c b/arch/mips/cavium-octeon/pci-common.c
deleted file mode 100644
index cd029f88da7..00000000000
--- a/arch/mips/cavium-octeon/pci-common.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2007 Cavium Networks
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include "pci-common.h"
-
-typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
-enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
-
-/**
- * Map a PCI device to the appropriate interrupt line
- *
- * @param dev    The Linux PCI device structure for the device to map
- * @param slot   The slot number for this device on __BUS 0__. Linux
- *               enumerates through all the bridges and figures out the
- *               slot on Bus 0 where this device eventually hooks to.
- * @param pin    The PCI interrupt pin read from the device, then swizzled
- *               as it goes through each bridge.
- * @return Interrupt number for the device
- */
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (octeon_pcibios_map_irq)
-		return octeon_pcibios_map_irq(dev, slot, pin);
-	else
-		panic("octeon_pcibios_map_irq doesn't point to a "
-		      "pcibios_map_irq() function");
-}
-
-
-/**
- * Called to perform platform specific PCI setup
- *
- * @param dev
- * @return
- */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	uint16_t config;
-	uint32_t dconfig;
-	int pos;
-	/*
-	 * Force the Cache line setting to 64 bytes. The standard
-	 * Linux bus scan doesn't seem to set it. Octeon really has
-	 * 128 byte lines, but Intel bridges get really upset if you
-	 * try and set values above 64 bytes. Value is specified in
-	 * 32bit words.
-	 */
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
-	/* Set latency timers for all devices */
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
-
-	/* Enable reporting System errors and parity errors on all devices */
-	/* Enable parity checking and error reporting */
-	pci_read_config_word(dev, PCI_COMMAND, &config);
-	config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-	pci_write_config_word(dev, PCI_COMMAND, config);
-
-	if (dev->subordinate) {
-		/* Set latency timers on sub bridges */
-		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
-		/* More bridge error detection */
-		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
-		config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
-		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
-	}
-
-	/* Enable the PCIe normal error reporting */
-	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
-	if (pos) {
-		/* Update Device Control */
-		pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
-		/* Correctable Error Reporting */
-		config |= PCI_EXP_DEVCTL_CERE;
-		/* Non-Fatal Error Reporting */
-		config |= PCI_EXP_DEVCTL_NFERE;
-		/* Fatal Error Reporting */
-		config |= PCI_EXP_DEVCTL_FERE;
-		/* Unsupported Request */
-		config |= PCI_EXP_DEVCTL_URRE;
-		pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
-	}
-
-	/* Find the Advanced Error Reporting capability */
-	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
-	if (pos) {
-		/* Clear Uncorrectable Error Status */
-		pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
-				      &dconfig);
-		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
-				       dconfig);
-		/* Enable reporting of all uncorrectable errors */
-		/* Uncorrectable Error Mask - turned on bits disable errors */
-		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
-		/*
-		 * Leave severity at HW default. This only controls if
-		 * errors are reported as uncorrectable or
-		 * correctable, not if the error is reported.
-		 */
-		/* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
-		/* Clear Correctable Error Status */
-		pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
-		pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
-		/* Enable reporting of all correctable errors */
-		/* Correctable Error Mask - turned on bits disable errors */
-		pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
-		/* Advanced Error Capabilities */
-		pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
-		/* ECRC Generation Enable */
-		if (config & PCI_ERR_CAP_ECRC_GENC)
-			config |= PCI_ERR_CAP_ECRC_GENE;
-		/* ECRC Check Enable */
-		if (config & PCI_ERR_CAP_ECRC_CHKC)
-			config |= PCI_ERR_CAP_ECRC_CHKE;
-		pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
-		/* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
-		/* Report all errors to the root complex */
-		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
-				       PCI_ERR_ROOT_CMD_COR_EN |
-				       PCI_ERR_ROOT_CMD_NONFATAL_EN |
-				       PCI_ERR_ROOT_CMD_FATAL_EN);
-		/* Clear the Root status register */
-		pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
-		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
-	}
-
-	return 0;
-}
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 0b891a9c625..32d51a31dc4 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -194,11 +194,11 @@ static void octeon_init_secondary(void)
 void octeon_prepare_cpus(unsigned int max_cpus)
 {
 	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffffffff);
-	if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_SHARED,
+	if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
 			"mailbox0", mailbox_interrupt)) {
 		panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
 	}
-	if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_SHARED,
+	if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_DISABLED,
 			"mailbox1", mailbox_interrupt)) {
 		panic("Cannot request_irq(OCTEON_IRQ_MBOX1)\n");
 	}
diff --git a/arch/mips/cobalt/buttons.c b/arch/mips/cobalt/buttons.c
index 9e143989c7b..4eaec8b46e0 100644
--- a/arch/mips/cobalt/buttons.c
+++ b/arch/mips/cobalt/buttons.c
@@ -1,7 +1,7 @@
 /*
  *  Cobalt buttons platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c
index 0720e4fae31..0f1cd90f37e 100644
--- a/arch/mips/cobalt/lcd.c
+++ b/arch/mips/cobalt/lcd.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt LCD platform device.
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/led.c b/arch/mips/cobalt/led.c
index 1c6ebd468b0..d3ce6fa1dc7 100644
--- a/arch/mips/cobalt/led.c
+++ b/arch/mips/cobalt/led.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt LED platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c
index 2b088ef3839..691d620b676 100644
--- a/arch/mips/cobalt/mtd.c
+++ b/arch/mips/cobalt/mtd.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt MTD device.
  *
- *  Copyright (C) 2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/rtc.c b/arch/mips/cobalt/rtc.c
index e70794b8bcb..3ab39898b4e 100644
--- a/arch/mips/cobalt/rtc.c
+++ b/arch/mips/cobalt/rtc.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt RTC platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/serial.c b/arch/mips/cobalt/serial.c
index 53b8d0d6da9..7cb51f57275 100644
--- a/arch/mips/cobalt/serial.c
+++ b/arch/mips/cobalt/serial.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt UART platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/time.c b/arch/mips/cobalt/time.c
index 4a570e7145f..0162f9edc69 100644
--- a/arch/mips/cobalt/time.c
+++ b/arch/mips/cobalt/time.c
@@ -1,7 +1,7 @@
 /*
  *  Cobalt time initialization.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
new file mode 100644
index 00000000000..dad5b6769d7
--- /dev/null
+++ b/arch/mips/configs/ar7_defconfig
@@ -0,0 +1,1182 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jun 24 14:08:59 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+CONFIG_AR7=y
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_NO_EXCEPT_FILL=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_KEXEC=y
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_PROBE_INITRD_HEADER=y
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+# CONFIG_ATM_CLIP is not set
+# CONFIG_ATM_LANE is not set
+CONFIG_ATM_BR2684=m
+CONFIG_ATM_BR2684_IPFILTER=y
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+# CONFIG_AX25 is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_DEFAULT_PS=y
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_CPMAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AR7_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_SERIAL=y
+CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_EMBEDDED=y
+CONFIG_SSB_DRIVER_EXTIF=y
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_VLYNQ=y
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/dec/ecc-berr.c b/arch/mips/dec/ecc-berr.c
index 6a17c9b508e..7abce661b90 100644
--- a/arch/mips/dec/ecc-berr.c
+++ b/arch/mips/dec/ecc-berr.c
@@ -1,6 +1,4 @@
 /*
- *	linux/arch/mips/dec/ecc-berr.c
- *
  *	Bus error event handling code for systems equipped with ECC
  *	handling logic, i.e. DECstation/DECsystem 5000/200 (KN02),
  *	5000/240 (KN03), 5000/260 (KN05) and DECsystem 5900 (KN03),
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index 00cecdcc75f..82c85281878 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -1,6 +1,4 @@
 /*
- * arch/mips/dec/int-handler.S
- *
  * Copyright (C) 1995, 1996, 1997 Paul M. Antoine and Harald Koerfgen
  * Copyright (C) 2000, 2001, 2002, 2003, 2005  Maciej W. Rozycki
  *
diff --git a/arch/mips/dec/ioasic-irq.c b/arch/mips/dec/ioasic-irq.c
index 3acb133668d..cb41954fc32 100644
--- a/arch/mips/dec/ioasic-irq.c
+++ b/arch/mips/dec/ioasic-irq.c
@@ -1,6 +1,4 @@
 /*
- *	linux/arch/mips/dec/ioasic-irq.c
- *
  *	DEC I/O ASIC interrupts.
  *
  *	Copyright (c) 2002, 2003  Maciej W. Rozycki
diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c
index d3b8002bf1e..b0dc6d53edd 100644
--- a/arch/mips/dec/kn01-berr.c
+++ b/arch/mips/dec/kn01-berr.c
@@ -1,6 +1,4 @@
 /*
- *	linux/arch/mips/dec/kn01-berr.c
- *
  *	Bus error event handling code for DECstation/DECsystem 3100
  *	and 2100 (KN01) systems equipped with parity error detection
  *	logic.
diff --git a/arch/mips/dec/kn02-irq.c b/arch/mips/dec/kn02-irq.c
index 02439dc0ba8..ed90a8deabc 100644
--- a/arch/mips/dec/kn02-irq.c
+++ b/arch/mips/dec/kn02-irq.c
@@ -1,6 +1,4 @@
 /*
- *	linux/arch/mips/dec/kn02-irq.c
- *
  *	DECstation 5000/200 (KN02) Control and Status Register
  *	interrupts.
  *
diff --git a/arch/mips/dec/kn02xa-berr.c b/arch/mips/dec/kn02xa-berr.c
index 5f04545c360..07ca5405d48 100644
--- a/arch/mips/dec/kn02xa-berr.c
+++ b/arch/mips/dec/kn02xa-berr.c
@@ -1,6 +1,4 @@
 /*
- *	linux/arch/mips/dec/kn02xa-berr.c
- *
  *	Bus error event handling code for 5000-series systems equipped
  *	with parity error detection logic, i.e. DECstation/DECsystem
  *	5000/120, /125, /133 (KN02-BA), 5000/150 (KN04-BA) and Personal
diff --git a/arch/mips/dec/prom/call_o32.S b/arch/mips/dec/prom/call_o32.S
index e523454bda3..8c8498159e4 100644
--- a/arch/mips/dec/prom/call_o32.S
+++ b/arch/mips/dec/prom/call_o32.S
@@ -1,6 +1,4 @@
 /*
- *	arch/mips/dec/prom/call_o32.S
- *
  *	O32 interface for the 64 (or N32) ABI.
  *
  *	Copyright (C) 2002  Maciej W. Rozycki
diff --git a/arch/mips/dec/prom/console.c b/arch/mips/dec/prom/console.c
index 078e1a12421..caa6e047caf 100644
--- a/arch/mips/dec/prom/console.c
+++ b/arch/mips/dec/prom/console.c
@@ -1,6 +1,4 @@
 /*
- *	arch/mips/dec/prom/console.c
- *
  *	DECstation PROM-based early console support.
  *
  *	Copyright (C) 2004, 2007  Maciej W. Rozycki
diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c
index 1359c03ded5..463136e6685 100644
--- a/arch/mips/dec/time.c
+++ b/arch/mips/dec/time.c
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/mips/dec/time.c
- *
  *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
  *  Copyright (C) 2000, 2003  Maciej W. Rozycki
  *
diff --git a/arch/mips/emma/common/Makefile b/arch/mips/emma/common/Makefile
index c392d28c1ef..f27d84d1904 100644
--- a/arch/mips/emma/common/Makefile
+++ b/arch/mips/emma/common/Makefile
@@ -1,7 +1,4 @@
 #
-#  arch/mips/emma2rh/common/Makefile
-#       Makefile for the common code of NEC EMMA2RH based board.
-#
 #  Copyright (C) NEC Electronics Corporation 2005-2006
 #
 #  This program is free software; you can redistribute it and/or modify
diff --git a/arch/mips/emma/common/prom.c b/arch/mips/emma/common/prom.c
index 120f53fbdb4..708f0876140 100644
--- a/arch/mips/emma/common/prom.c
+++ b/arch/mips/emma/common/prom.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/emma2rh/common/prom.c
- *      This file is prom file.
- *
  *  Copyright (C) NEC Electronics Corporation 2004-2006
  *
  *  This file is based on the arch/mips/ddb5xxx/common/prom.c
diff --git a/arch/mips/emma/markeins/Makefile b/arch/mips/emma/markeins/Makefile
index 16e0017ba91..f8ba2508fa2 100644
--- a/arch/mips/emma/markeins/Makefile
+++ b/arch/mips/emma/markeins/Makefile
@@ -1,7 +1,4 @@
 #
-#  arch/mips/emma2rh/markeins/Makefile
-#       Makefile for the common code of NEC EMMA2RH based board.
-#
 #  Copyright (C) NEC Electronics Corporation 2005-2006
 #
 #  This program is free software; you can redistribute it and/or modify
diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c
index 43828ae796e..9504b7ee0b7 100644
--- a/arch/mips/emma/markeins/irq.c
+++ b/arch/mips/emma/markeins/irq.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/emma2rh/markeins/irq.c
- *      This file defines the irq handler for EMMA2RH.
- *
  *  Copyright (C) NEC Electronics Corporation 2004-2006
  *
  *  This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
diff --git a/arch/mips/emma/markeins/led.c b/arch/mips/emma/markeins/led.c
index 377a181b656..49755896857 100644
--- a/arch/mips/emma/markeins/led.c
+++ b/arch/mips/emma/markeins/led.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/emma2rh/markeins/led.c
- *      This file defines the led display for Mark-eins.
- *
  *  Copyright (C) NEC Electronics Corporation 2004-2006
  *
  *  This program is free software; you can redistribute it and/or modify
diff --git a/arch/mips/emma/markeins/platform.c b/arch/mips/emma/markeins/platform.c
index 80ae12ef87d..b05b08b92a3 100644
--- a/arch/mips/emma/markeins/platform.c
+++ b/arch/mips/emma/markeins/platform.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/emma2rh/markeins/platofrm.c
- *      This file sets up platform devices for EMMA2RH Mark-eins.
- *
  *  Copyright(C) MontaVista Software Inc, 2006
  *
  *  Author: dmitry pervushin <dpervushin@ru.mvista.com>
diff --git a/arch/mips/emma/markeins/setup.c b/arch/mips/emma/markeins/setup.c
index 67f45650008..335dc8c1a1b 100644
--- a/arch/mips/emma/markeins/setup.c
+++ b/arch/mips/emma/markeins/setup.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/emma2rh/markeins/setup.c
- *      This file is setup for EMMA2RH Mark-eins.
- *
  *  Copyright (C) NEC Electronics Corporation 2004-2006
  *
  *  This file is based on the arch/mips/ddb5xxx/ddb5477/setup.c.
diff --git a/arch/mips/fw/lib/call_o32.S b/arch/mips/fw/lib/call_o32.S
index bdf7d1d4081..e0a68713b3c 100644
--- a/arch/mips/fw/lib/call_o32.S
+++ b/arch/mips/fw/lib/call_o32.S
@@ -1,6 +1,4 @@
 /*
- *	arch/mips/dec/prom/call_o32.S
- *
  *	O32 interface for the 64 (or N32) ABI.
  *
  *	Copyright (C) 2002  Maciej W. Rozycki
diff --git a/arch/mips/gt64120/wrppmc/serial.c b/arch/mips/gt64120/wrppmc/serial.c
index 5ec1c2ffd3a..6f9d0858f59 100644
--- a/arch/mips/gt64120/wrppmc/serial.c
+++ b/arch/mips/gt64120/wrppmc/serial.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of WRPPMC UART platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/amon.h b/arch/mips/include/asm/amon.h
new file mode 100644
index 00000000000..c3dc1a68dd8
--- /dev/null
+++ b/arch/mips/include/asm/amon.h
@@ -0,0 +1,7 @@
+/*
+ * Amon support
+ */
+
+int amon_cpu_avail(int);
+void amon_cpu_start(int, unsigned long, unsigned long,
+		    unsigned long, unsigned long);
diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h
index ba1702e8693..3af0b8fb3b8 100644
--- a/arch/mips/include/asm/ds1287.h
+++ b/arch/mips/include/asm/ds1287.h
@@ -1,7 +1,7 @@
 /*
  *  DS1287 timer functions.
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index d58f128aa74..7990694cda2 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -316,9 +316,13 @@ extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs);
 extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
 extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
 
+#ifndef ELF_CORE_COPY_REGS
 #define ELF_CORE_COPY_REGS(elf_regs, regs)			\
 	elf_dump_regs((elf_greg_t *)&(elf_regs), regs);
+#endif
+#ifndef ELF_CORE_COPY_TASK_REGS
 #define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#endif
 #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs)			\
 	dump_task_fpu(tsk, elf_fpregs)
 
diff --git a/arch/mips/include/asm/emma/emma2rh.h b/arch/mips/include/asm/emma/emma2rh.h
index 30aea91de62..2afb2fe11b3 100644
--- a/arch/mips/include/asm/emma/emma2rh.h
+++ b/arch/mips/include/asm/emma/emma2rh.h
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/include/asm/emma/emma2rh.h
- *      This file is EMMA2RH common header.
- *
  *  Copyright (C) NEC Electronics Corporation 2005-2006
  *
  *  This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
diff --git a/arch/mips/include/asm/emma/markeins.h b/arch/mips/include/asm/emma/markeins.h
index 973b0628490..2618bf23024 100644
--- a/arch/mips/include/asm/emma/markeins.h
+++ b/arch/mips/include/asm/emma/markeins.h
@@ -1,7 +1,4 @@
 /*
- *  include/asm-mips/emma2rh/markeins.h
- *      This file is EMMA2RH board depended header.
- *
  *  Copyright (C) NEC Electronics Corporation 2005-2006
  *
  *  This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h
index d74a8a4ca86..36fd969d64d 100644
--- a/arch/mips/include/asm/gcmpregs.h
+++ b/arch/mips/include/asm/gcmpregs.h
@@ -114,4 +114,6 @@
 #define GCMP_CCB_DINTGROUP_OFS		0x0030		/* DINT Group Participate */
 #define GCMP_CCB_DBGGROUP_OFS		0x0100		/* DebugBreak Group */
 
+extern int __init gcmp_probe(unsigned long, unsigned long);
+
 #endif /* _ASM_GCMPREGS_H */
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 954807d9d66..a8f57341f12 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -20,7 +20,11 @@
 #define GIC_TRIG_EDGE			1
 #define GIC_TRIG_LEVEL			0
 
+#ifdef CONFIG_SMP
+#define GIC_NUM_INTRS			(24 + NR_CPUS * 2)
+#else
 #define GIC_NUM_INTRS			32
+#endif
 
 #define MSK(n) ((1 << (n)) - 1)
 #define REG32(addr)		(*(volatile unsigned int *) (addr))
@@ -483,5 +487,7 @@ extern void gic_init(unsigned long gic_base_addr,
 
 extern unsigned int gic_get_int(void);
 extern void gic_send_ipi(unsigned int intr);
+extern unsigned int plat_ipi_call_int_xlate(unsigned int);
+extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
 
 #endif /* _ASM_GICREGS_H */
diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h
index f9a7c3ac2e6..250a2407b59 100644
--- a/arch/mips/include/asm/irq_gt641xx.h
+++ b/arch/mips/include/asm/irq_gt641xx.h
@@ -1,7 +1,7 @@
 /*
  *  Galileo/Marvell GT641xx IRQ definitions.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
new file mode 100644
index 00000000000..de71694614d
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __AR7_H__
+#define __AR7_H__
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+
+#include <asm/addrspace.h>
+
+#define AR7_SDRAM_BASE	0x14000000
+
+#define AR7_REGS_BASE	0x08610000
+
+#define AR7_REGS_MAC0	(AR7_REGS_BASE + 0x0000)
+#define AR7_REGS_GPIO	(AR7_REGS_BASE + 0x0900)
+/* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */
+#define AR7_REGS_POWER	(AR7_REGS_BASE + 0x0a00)
+#define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80)
+#define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20)
+#define AR7_REGS_UART0	(AR7_REGS_BASE + 0x0e00)
+#define AR7_REGS_USB	(AR7_REGS_BASE + 0x1200)
+#define AR7_REGS_RESET	(AR7_REGS_BASE + 0x1600)
+#define AR7_REGS_VLYNQ0	(AR7_REGS_BASE + 0x1800)
+#define AR7_REGS_DCL	(AR7_REGS_BASE + 0x1a00)
+#define AR7_REGS_VLYNQ1	(AR7_REGS_BASE + 0x1c00)
+#define AR7_REGS_MDIO	(AR7_REGS_BASE + 0x1e00)
+#define AR7_REGS_IRQ	(AR7_REGS_BASE + 0x2400)
+#define AR7_REGS_MAC1	(AR7_REGS_BASE + 0x2800)
+
+#define AR7_REGS_WDT	(AR7_REGS_BASE + 0x1f00)
+#define UR8_REGS_WDT	(AR7_REGS_BASE + 0x0b00)
+#define UR8_REGS_UART1	(AR7_REGS_BASE + 0x0f00)
+
+#define AR7_RESET_PEREPHERIAL	0x0
+#define AR7_RESET_SOFTWARE	0x4
+#define AR7_RESET_STATUS	0x8
+
+#define AR7_RESET_BIT_CPMAC_LO	17
+#define AR7_RESET_BIT_CPMAC_HI	21
+#define AR7_RESET_BIT_MDIO	22
+#define AR7_RESET_BIT_EPHY	26
+
+/* GPIO control registers */
+#define AR7_GPIO_INPUT	0x0
+#define AR7_GPIO_OUTPUT	0x4
+#define AR7_GPIO_DIR	0x8
+#define AR7_GPIO_ENABLE	0xc
+
+#define AR7_CHIP_7100	0x18
+#define AR7_CHIP_7200	0x2b
+#define AR7_CHIP_7300	0x05
+
+/* Interrupts */
+#define AR7_IRQ_UART0	15
+#define AR7_IRQ_UART1	16
+
+/* Clocks */
+#define AR7_AFE_CLOCK	35328000
+#define AR7_REF_CLOCK	25000000
+#define AR7_XTAL_CLOCK	24000000
+
+struct plat_cpmac_data {
+	int reset_bit;
+	int power_bit;
+	u32 phy_mask;
+	char dev_addr[6];
+};
+
+struct plat_dsl_data {
+	int reset_bit_dsl;
+	int reset_bit_sar;
+};
+
+extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock;
+
+static inline u16 ar7_chip_id(void)
+{
+	return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff;
+}
+
+static inline u8 ar7_chip_rev(void)
+{
+	return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff;
+}
+
+static inline int ar7_cpu_freq(void)
+{
+	return ar7_cpu_clock;
+}
+
+static inline int ar7_bus_freq(void)
+{
+	return ar7_bus_clock;
+}
+
+static inline int ar7_vbus_freq(void)
+{
+	return ar7_bus_clock / 2;
+}
+#define ar7_cpmac_freq ar7_vbus_freq
+
+static inline int ar7_dsp_freq(void)
+{
+	return ar7_dsp_clock;
+}
+
+static inline int ar7_has_high_cpmac(void)
+{
+	u16 chip_id = ar7_chip_id();
+	switch (chip_id) {
+	case AR7_CHIP_7100:
+	case AR7_CHIP_7200:
+		return 0;
+	case AR7_CHIP_7300:
+		return 1;
+	default:
+		return -ENXIO;
+	}
+}
+#define ar7_has_high_vlynq ar7_has_high_cpmac
+#define ar7_has_second_uart ar7_has_high_cpmac
+
+static inline void ar7_device_enable(u32 bit)
+{
+	void *reset_reg =
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+	writel(readl(reset_reg) | (1 << bit), reset_reg);
+	msleep(20);
+}
+
+static inline void ar7_device_disable(u32 bit)
+{
+	void *reset_reg =
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+	writel(readl(reset_reg) & ~(1 << bit), reset_reg);
+	msleep(20);
+}
+
+static inline void ar7_device_reset(u32 bit)
+{
+	ar7_device_disable(bit);
+	ar7_device_enable(bit);
+}
+
+static inline void ar7_device_on(u32 bit)
+{
+	void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+	writel(readl(power_reg) | (1 << bit), power_reg);
+	msleep(20);
+}
+
+static inline void ar7_device_off(u32 bit)
+{
+	void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+	writel(readl(power_reg) & ~(1 << bit), power_reg);
+	msleep(20);
+}
+
+#endif /* __AR7_H__ */
diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h
new file mode 100644
index 00000000000..cbe9c4f126d
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/gpio.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __AR7_GPIO_H__
+#define __AR7_GPIO_H__
+
+#include <asm/mach-ar7/ar7.h>
+
+#define AR7_GPIO_MAX 32
+
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+
+/* Common GPIO layer */
+static inline int gpio_get_value(unsigned gpio)
+{
+	void __iomem *gpio_in =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT);
+
+	return readl(gpio_in) & (1 << gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	void __iomem *gpio_out =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT);
+	unsigned tmp;
+
+	tmp = readl(gpio_out) & ~(1 << gpio);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, gpio_out);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	void __iomem *gpio_dir =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
+
+	if (gpio >= AR7_GPIO_MAX)
+		return -EINVAL;
+
+	writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
+
+	return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	void __iomem *gpio_dir =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
+
+	if (gpio >= AR7_GPIO_MAX)
+		return -EINVAL;
+
+	gpio_set_value(gpio, value);
+	writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
+
+	return 0;
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+
+/* Board specific GPIO functions */
+static inline int ar7_gpio_enable(unsigned gpio)
+{
+	void __iomem *gpio_en =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
+
+	writel(readl(gpio_en) | (1 << gpio), gpio_en);
+
+	return 0;
+}
+
+static inline int ar7_gpio_disable(unsigned gpio)
+{
+	void __iomem *gpio_en =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
+
+	writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
+
+	return 0;
+}
+
+#include <asm-generic/gpio.h>
+
+#endif
diff --git a/arch/mips/include/asm/mach-ar7/irq.h b/arch/mips/include/asm/mach-ar7/irq.h
new file mode 100644
index 00000000000..39e9757e3d9
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/irq.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Shamelessly copied from asm-mips/mach-emma2rh/
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_AR7_IRQ_H
+#define __ASM_AR7_IRQ_H
+
+#define NR_IRQS	256
+
+#include_next <irq.h>
+
+#endif /* __ASM_AR7_IRQ_H */
diff --git a/arch/mips/include/asm/mach-ar7/prom.h b/arch/mips/include/asm/mach-ar7/prom.h
new file mode 100644
index 00000000000..088f61fe85e
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/prom.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2006, 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __PROM_H__
+#define __PROM_H__
+
+extern char *prom_getenv(const char *name);
+extern void prom_meminit(void);
+
+#endif /* __PROM_H__ */
diff --git a/arch/mips/include/asm/mach-ar7/spaces.h b/arch/mips/include/asm/mach-ar7/spaces.h
new file mode 100644
index 00000000000..ac28f273449
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/spaces.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_AR7_SPACES_H
+#define _ASM_AR7_SPACES_H
+
+/*
+ * This handles the memory map.
+ * We handle pages at KSEG0 for kernels with 32 bit address space.
+ */
+#define PAGE_OFFSET		0x94000000UL
+#define PHYS_OFFSET		0x14000000UL
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* __ASM_AR7_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ar7/war.h b/arch/mips/include/asm/mach-ar7/war.h
new file mode 100644
index 00000000000..f4862b56308
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_AR7_WAR_H
+#define __ASM_MIPS_MACH_AR7_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_AR7_WAR_H */
diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h
index 57c8c9ac585..9da9acf5dcb 100644
--- a/arch/mips/include/asm/mach-cobalt/irq.h
+++ b/arch/mips/include/asm/mach-cobalt/irq.h
@@ -8,7 +8,7 @@
  * Copyright (C) 1997 Cobalt Microserver
  * Copyright (C) 1997, 2003 Ralf Baechle
  * Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv)
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
  */
 #ifndef _ASM_COBALT_IRQ_H
 #define _ASM_COBALT_IRQ_H
diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
index ae9c5523c7e..f8afec3f294 100644
--- a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
+++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/pci-common.h b/arch/mips/include/asm/octeon/pci-octeon.h
index 74ae79991e4..6ac5d3e3398 100644
--- a/arch/mips/cavium-octeon/pci-common.h
+++ b/arch/mips/include/asm/octeon/pci-octeon.h
@@ -3,23 +3,29 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
  */
-#ifndef __OCTEON_PCI_COMMON_H__
-#define __OCTEON_PCI_COMMON_H__
+
+#ifndef __PCI_OCTEON_H__
+#define __PCI_OCTEON_H__
 
 #include <linux/pci.h>
 
 /* Some PCI cards require delays when accessing config space. */
 #define PCI_CONFIG_SPACE_DELAY 10000
 
-/* pcibios_map_irq() is defined inside pci-common.c. All it does is call the
-   Octeon specific version pointed to by this variable. This function needs to
-   change for PCI or PCIe based hosts */
-extern typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
+/*
+ * pcibios_map_irq() is defined inside pci-octeon.c. All it does is
+ * call the Octeon specific version pointed to by this variable. This
+ * function needs to change for PCI or PCIe based hosts.
+ */
+extern int (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+				     u8 slot, u8 pin);
 
-/* The following defines are only used when octeon_dma_bar_type =
-   OCTEON_DMA_BAR_TYPE_BIG */
+/*
+ * The following defines are used when octeon_dma_bar_type =
+ * OCTEON_DMA_BAR_TYPE_BIG
+ */
 #define OCTEON_PCI_BAR1_HOLE_BITS 5
 #define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3))
 
@@ -30,9 +36,9 @@ enum octeon_dma_bar_type {
 	OCTEON_DMA_BAR_TYPE_PCIE
 };
 
-/**
- * This is a variable to tell the DMA mapping system in dma-octeon.c
- * how to map PCI DMA addresses.
+/*
+ * This tells the DMA mapping system in dma-octeon.c how to map PCI
+ * DMA addresses.
  */
 extern enum octeon_dma_bar_type octeon_dma_bar_type;
 
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index dc0eaa73128..4320239cf4e 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -32,10 +32,12 @@
 #define PAGE_SIZE	(1UL << PAGE_SHIFT)
 #define PAGE_MASK       (~((1 << PAGE_SHIFT) - 1))
 
+#ifdef CONFIG_HUGETLB_PAGE
 #define HPAGE_SHIFT	(PAGE_SHIFT + PAGE_SHIFT - 3)
 #define HPAGE_SIZE	((1UL) << HPAGE_SHIFT)
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#endif /* CONFIG_HUGETLB_PAGE */
 
 #ifndef __ASSEMBLY__
 
@@ -165,7 +167,14 @@ typedef struct { unsigned long pgprot; } pgprot_t;
 
 #ifdef CONFIG_FLATMEM
 
-#define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
+#define pfn_valid(pfn)							\
+({									\
+	unsigned long __pfn = (pfn);					\
+	/* avoid <linux/bootmem.h> include hell */			\
+	extern unsigned long min_low_pfn;				\
+									\
+	__pfn >= min_low_pfn && __pfn < max_mapnr;			\
+})
 
 #elif defined(CONFIG_SPARSEMEM)
 
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
index 1275831dda2..3738f4b48cb 100644
--- a/arch/mips/include/asm/pgalloc.h
+++ b/arch/mips/include/asm/pgalloc.h
@@ -98,23 +98,12 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_pages(pte, PTE_ORDER);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,address)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\
 } while (0)
 
-#ifdef CONFIG_32BIT
-
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-#define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb, x)		do { } while (0)
-
-#endif
-
 #ifdef CONFIG_64BIT
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
@@ -132,7 +121,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	free_pages((unsigned long)pmd, PMD_ORDER);
 }
 
-#define __pmd_free_tlb(tlb, x)	pmd_free((tlb)->mm, x)
+#define __pmd_free_tlb(tlb, x, addr)	pmd_free((tlb)->mm, x)
 
 #endif
 
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
index 0bf48fc1892..9e2ee429c52 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
@@ -23,6 +23,8 @@
 #if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \
 	defined(CONFIG_PMC_MSP7120_FPGA)
 #define MIPS34K_MISSED_ITLB_WAR         1
+#else
+#define MIPS34K_MISSED_ITLB_WAR         0
 #endif
 
 #endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 0f926aa0cb4..087a8884ef0 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -311,8 +311,9 @@ extern void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long
 
 unsigned long get_wchan(struct task_struct *p);
 
-#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + THREAD_SIZE - 32)
-#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk) - 1)
+#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + \
+			 THREAD_SIZE - 32 - sizeof(struct pt_regs))
+#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk))
 #define KSTK_EIP(tsk) (task_pt_regs(tsk)->cp0_epc)
 #define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29])
 #define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status)
diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h
index 634b55d7e7f..910e71a1246 100644
--- a/arch/mips/include/asm/reg.h
+++ b/arch/mips/include/asm/reg.h
@@ -69,7 +69,7 @@
 
 #endif
 
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && !defined(WANT_COMPAT_REG_H)
 
 #define EF_R0			 0
 #define EF_R1			 1
diff --git a/arch/mips/include/asm/swab.h b/arch/mips/include/asm/swab.h
index 99993c0d6c1..97c2f81b4b4 100644
--- a/arch/mips/include/asm/swab.h
+++ b/arch/mips/include/asm/swab.h
@@ -38,7 +38,11 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 }
 #define __arch_swab32 __arch_swab32
 
-#ifdef CONFIG_CPU_MIPS64_R2
+/*
+ * Having already checked for CONFIG_CPU_MIPSR2, enable the
+ * optimized version for 64-bit kernel on r2 CPUs.
+ */
+#ifdef CONFIG_64BIT
 static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 {
 	__asm__(
@@ -50,6 +54,6 @@ static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 	return x;
 }
 #define __arch_swab64 __arch_swab64
-#endif /* CONFIG_CPU_MIPS64_R2 */
+#endif /* CONFIG_64BIT */
 #endif /* CONFIG_CPU_MIPSR2 */
 #endif /* _ASM_SWAB_H */
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 143a48136a4..f9df720d2e4 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -39,8 +39,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #define INIT_THREAD_INFO(tsk)			\
 {						\
@@ -48,7 +46,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= _TIF_FIXADE,		\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 40005010827..e753a777949 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -352,16 +352,19 @@
 #define __NR_inotify_init1		(__NR_Linux + 329)
 #define __NR_preadv			(__NR_Linux + 330)
 #define __NR_pwritev			(__NR_Linux + 331)
+#define __NR_rt_tgsigqueueinfo		(__NR_Linux + 332)
+#define __NR_perf_counter_open		(__NR_Linux + 333)
+#define __NR_accept4			(__NR_Linux + 334)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		331
+#define __NR_Linux_syscalls		334
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		331
+#define __NR_O32_Linux_syscalls		334
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -660,16 +663,19 @@
 #define __NR_inotify_init1		(__NR_Linux + 288)
 #define __NR_preadv			(__NR_Linux + 289)
 #define __NR_pwritev			(__NR_Linux + 290)
+#define __NR_rt_tgsigqueueinfo		(__NR_Linux + 291)
+#define __NR_perf_counter_open		(__NR_Linux + 292)
+#define __NR_accept4			(__NR_Linux + 293)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		290
+#define __NR_Linux_syscalls		293
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		290
+#define __NR_64_Linux_syscalls		293
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -972,16 +978,19 @@
 #define __NR_inotify_init1		(__NR_Linux + 292)
 #define __NR_preadv			(__NR_Linux + 293)
 #define __NR_pwritev			(__NR_Linux + 294)
+#define __NR_rt_tgsigqueueinfo		(__NR_Linux + 295)
+#define __NR_perf_counter_open		(__NR_Linux + 296)
+#define __NR_accept4			(__NR_Linux + 297)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		294
+#define __NR_Linux_syscalls		297
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		294
+#define __NR_N32_Linux_syscalls		297
 
 #ifdef __KERNEL__
 
diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h
index e0ee05a3dfc..fcc6569414f 100644
--- a/arch/mips/include/asm/vr41xx/capcella.h
+++ b/arch/mips/include/asm/vr41xx/capcella.h
@@ -1,7 +1,7 @@
 /*
  *  capcella.h, Include file for ZAO Networks Capcella.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h
index 0bcdd3a5c25..6a90bc1d916 100644
--- a/arch/mips/include/asm/vr41xx/giu.h
+++ b/arch/mips/include/asm/vr41xx/giu.h
@@ -1,7 +1,7 @@
 /*
  *  Include file for NEC VR4100 series General-purpose I/O Unit.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005-2009  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -41,7 +41,8 @@ typedef enum {
 	IRQ_SIGNAL_HOLD,
 } irq_signal_t;
 
-extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal);
+extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger,
+				   irq_signal_t signal);
 
 typedef enum {
 	IRQ_LEVEL_LOW,
@@ -51,23 +52,6 @@ typedef enum {
 extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level);
 
 typedef enum {
-	GPIO_DATA_LOW,
-	GPIO_DATA_HIGH,
-	GPIO_DATA_INVAL,
-} gpio_data_t;
-
-extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin);
-extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data);
-
-typedef enum {
-	GPIO_INPUT,
-	GPIO_OUTPUT,
-	GPIO_OUTPUT_DISABLE,
-} gpio_direction_t;
-
-extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir);
-
-typedef enum {
 	GPIO_PULL_DOWN,
 	GPIO_PULL_UP,
 	GPIO_PULL_DISABLE,
diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h
index d315dfbc08f..b07f7321751 100644
--- a/arch/mips/include/asm/vr41xx/irq.h
+++ b/arch/mips/include/asm/vr41xx/irq.h
@@ -7,7 +7,7 @@
  * Copyright (C) 2001, 2002 Paul Mundt
  * Copyright (C) 2002 MontaVista Software, Inc.
  * Copyright (C) 2002 TimeSys Corp.
- * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yuasa@linux-mips.org>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h
index 1d67df843dc..130d09d8c8c 100644
--- a/arch/mips/include/asm/vr41xx/mpc30x.h
+++ b/arch/mips/include/asm/vr41xx/mpc30x.h
@@ -1,7 +1,7 @@
 /*
  *  mpc30x.h, Include file for Victor MP-C303/304.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h
index 6fc01ce1977..c231a3d6cfd 100644
--- a/arch/mips/include/asm/vr41xx/pci.h
+++ b/arch/mips/include/asm/vr41xx/pci.h
@@ -1,7 +1,7 @@
 /*
  *  Include file for NEC VR4100 series PCI Control Unit.
  *
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h
index da9f6e37340..ca806bc4ddc 100644
--- a/arch/mips/include/asm/vr41xx/siu.h
+++ b/arch/mips/include/asm/vr41xx/siu.h
@@ -1,7 +1,7 @@
 /*
  *  Include file for NEC VR4100 series Serial Interface Unit.
  *
- *  Copyright (C) 2005-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h
index dc981b4be0a..c78e8243b44 100644
--- a/arch/mips/include/asm/vr41xx/tb0219.h
+++ b/arch/mips/include/asm/vr41xx/tb0219.h
@@ -1,7 +1,7 @@
 /*
  *  tb0219.h, Include file for TANBAC TB0219.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  Modified for TANBAC TB0219:
  *  Copyright (C) 2003 Megasolution Inc.  <matsu@megasolution.jp>
diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h
index de527dcfa5f..36f5f798e41 100644
--- a/arch/mips/include/asm/vr41xx/tb0226.h
+++ b/arch/mips/include/asm/vr41xx/tb0226.h
@@ -1,7 +1,7 @@
 /*
  *  tb0226.h, Include file for TANBAC TB0226.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h
index 22be64971cc..7b96a43b72b 100644
--- a/arch/mips/include/asm/vr41xx/vr41xx.h
+++ b/arch/mips/include/asm/vr41xx/vr41xx.h
@@ -7,7 +7,7 @@
  * Copyright (C) 2001, 2002 Paul Mundt
  * Copyright (C) 2002 MontaVista Software, Inc.
  * Copyright (C) 2002 TimeSys Corp.
- * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index f0fd636723b..0d64d0f4641 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -190,7 +190,7 @@ int vdma_free(unsigned long laddr)
 		return -1;
 	}
 
-	while (pgtbl[i].owner == laddr && i < VDMA_PGTBL_ENTRIES) {
+	while (i < VDMA_PGTBL_ENTRIES && pgtbl[i].owner == laddr) {
 		pgtbl[i].owner = VDMA_PAGE_EMPTY;
 		i++;
 	}
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index e1333d7319e..ff448233dab 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -53,6 +53,23 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 #define ELF_ET_DYN_BASE         (TASK32_SIZE / 3 * 2)
 
 #include <asm/processor.h>
+
+/*
+ * When this file is selected, we are definitely running a 64bit kernel.
+ * So using the right regs define in asm/reg.h
+ */
+#define WANT_COMPAT_REG_H
+
+/* These MUST be defined before elf.h gets included */
+extern void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs);
+#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
+#define ELF_CORE_COPY_TASK_REGS(_tsk, _dest)				\
+({									\
+	int __res = 1;							\
+	elf32_core_copy_regs(*(_dest), task_pt_regs(_tsk));		\
+	__res;								\
+})
+
 #include <linux/module.h>
 #include <linux/elfcore.h>
 #include <linux/compat.h>
@@ -110,9 +127,6 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
 	value->tv_usec = rem / NSEC_PER_USEC;
 }
 
-#undef ELF_CORE_COPY_REGS
-#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
-
 void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs)
 {
 	int i;
diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c
index 1ada45ea070..6996da4d74a 100644
--- a/arch/mips/kernel/cevt-ds1287.c
+++ b/arch/mips/kernel/cevt-ds1287.c
@@ -1,7 +1,7 @@
 /*
  *  DS1287 clockevent driver
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c
index e9b787feedc..92351e00ae0 100644
--- a/arch/mips/kernel/cevt-gt641xx.c
+++ b/arch/mips/kernel/cevt-gt641xx.c
@@ -1,7 +1,7 @@
 /*
  *  GT641xx clockevent routines.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index b551f48d3a0..23da108506b 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -1,7 +1,7 @@
 /*
  *  DEC I/O ASIC's counter clocksource
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 492a0a8d70f..531ce7b1612 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -188,7 +188,8 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 
 	MTC0		zero, CP0_CONTEXT	# clear context register
 	PTR_LA		$28, init_thread_union
-	PTR_LI		sp, _THREAD_SIZE - 32
+	/* Set the SP after an empty pt_regs.  */
+	PTR_LI		sp, _THREAD_SIZE - 32 - PT_SIZE
 	PTR_ADDU	sp, $28
 	set_saved_sp	sp, t0, t1
 	PTR_SUBU	sp, 4 * SZREG		# init stack pointer
diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index 39000f103f2..d2072cd3859 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -107,9 +107,7 @@ static unsigned int gic_irq_startup(unsigned int irq)
 {
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_SET_INTR_MASK(irq, 1);
 	return 0;
 }
 
@@ -120,8 +118,7 @@ static void gic_irq_ack(unsigned int irq)
 #endif
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_CLR_INTR_MASK(irq, 1);
 
 	if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) {
 		if (!gic_wedgeb2bok)
@@ -138,18 +135,14 @@ static void gic_mask_irq(unsigned int irq)
 {
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_CLR_INTR_MASK(irq, 1);
 }
 
 static void gic_unmask_irq(unsigned int irq)
 {
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_SET_INTR_MASK(irq, 1);
 }
 
 #ifdef CONFIG_SMP
@@ -254,6 +247,10 @@ static void __init gic_basic_init(void)
 		if (cpu == X)
 			continue;
 
+		if (cpu == 0 && i != 0 && _intrmap[i].intrnum == 0 &&
+					_intrmap[i].ipiflag == 0)
+			continue;
+
 		setup_intr(_intrmap[i].intrnum,
 				_intrmap[i].cpunum,
 				_intrmap[i].pin,
diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c
index 1b81b131f43..ebcc5f7ad9c 100644
--- a/arch/mips/kernel/irq-gt641xx.c
+++ b/arch/mips/kernel/irq-gt641xx.c
@@ -1,7 +1,7 @@
 /*
  *  GT641xx IRQ routines.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/irq_txx9.c b/arch/mips/kernel/irq_txx9.c
index a4d1462c27f..9b78029bea7 100644
--- a/arch/mips/kernel/irq_txx9.c
+++ b/arch/mips/kernel/irq_txx9.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/mips/kernel/irq_txx9.c
- *
  * Based on linux/arch/mips/jmr3927/rbhma3100/irq.c,
  *          linux/arch/mips/tx4927/common/tx4927_irq.c,
  *          linux/arch/mips/tx4938/common/irq.c
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 3e9100dcc12..6f51dda87fc 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -98,7 +98,8 @@ static int apply_r_mips_32_rela(struct module *me, u32 *location, Elf_Addr v)
 static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
 {
 	if (v % 4) {
-		printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+		pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
+		       me->name);
 		return -ENOEXEC;
 	}
 
@@ -118,7 +119,8 @@ static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
 static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
 {
 	if (v % 4) {
-		printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+		pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n",
+		       me->name);
 		return -ENOEXEC;
 	}
 
@@ -222,7 +224,7 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
 	return 0;
 
 out_danger:
-	printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
+	pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name);
 
 	return -ENOEXEC;
 }
@@ -301,7 +303,7 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
 		/* This is the symbol it is referring to */
 		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
 			+ ELF_MIPS_R_SYM(rel[i]);
-		if (!sym->st_value) {
+		if (IS_ERR_VALUE(sym->st_value)) {
 			/* Ignore unresolved weak symbol */
 			if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
 				continue;
@@ -341,7 +343,7 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 		/* This is the symbol it is referring to */
 		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
 			+ ELF_MIPS_R_SYM(rel[i]);
-		if (!sym->st_value) {
+		if (IS_ERR_VALUE(sym->st_value)) {
 			/* Ignore unresolved weak symbol */
 			if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
 				continue;
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index e0a4ac18fa0..26109c4d517 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/mips/kernel/proc.c
- *
  *  Copyright (C) 1995, 1996, 2001  Ralf Baechle
  *  Copyright (C) 2001, 2004  MIPS Technologies, Inc.
  *  Copyright (C) 2004  Maciej W. Rozycki
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index c09d681b718..f3d73e1831c 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -115,7 +115,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 {
 	struct thread_info *ti = task_thread_info(p);
 	struct pt_regs *childregs;
-	long childksp;
+	unsigned long childksp;
 	p->set_child_tid = p->clear_child_tid = NULL;
 
 	childksp = (unsigned long)task_stack_page(p) + THREAD_SIZE - 32;
@@ -132,6 +132,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 
 	/* set up new TSS. */
 	childregs = (struct pt_regs *) childksp - 1;
+	/*  Put the stack after the struct pt_regs.  */
+	childksp = (unsigned long) childregs;
 	*childregs = *regs;
 	childregs->regs[7] = 0;	/* Clear error flag */
 
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index c4f9ac17474..32644b4a071 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -22,7 +22,6 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/user.h>
 #include <linux/security.h>
 
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 0b31b9bda04..b5708212353 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -652,6 +652,9 @@ einval:	li	v0, -ENOSYS
 	sys	sys_inotify_init1	1
 	sys	sys_preadv		6	/* 4330 */
 	sys	sys_pwritev		6
+	sys	sys_rt_tgsigqueueinfo	4
+	sys	sys_perf_counter_open	5
+	sys	sys_accept4		4
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index c647fd6e722..3d866f24e06 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -489,4 +489,7 @@ sys_call_table:
 	PTR	sys_inotify_init1
 	PTR	sys_preadv
 	PTR	sys_pwritev			/* 5390 */
+	PTR	sys_rt_tgsigqueueinfo
+	PTR	sys_perf_counter_open
+	PTR	sys_accept4
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 93cc672f452..e855b118a07 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -415,4 +415,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_inotify_init1
 	PTR	sys_preadv
 	PTR	sys_pwritev
+	PTR	compat_sys_rt_tgsigqueueinfo	/* 5295 */
+	PTR	sys_perf_counter_open
+	PTR	sys_accept4
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index a5598b2339d..0c49f1a660b 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -535,4 +535,7 @@ sys_call_table:
 	PTR	sys_inotify_init1
 	PTR	compat_sys_preadv		/* 4330 */
 	PTR	compat_sys_pwritev
+	PTR	compat_sys_rt_tgsigqueueinfo
+	PTR	sys_perf_counter_open
+	PTR	sys_accept4
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index 653be061b9e..ad0ff5dc4d5 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -37,80 +37,24 @@
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
 #include <asm/mips_mt.h>
-
-/*
- * Crude manipulation of the CPU masks to control which
- * which CPU's are brought online during initialisation
- *
- * Beware... this needs to be called after CPU discovery
- * but before CPU bringup
- */
-static int __init allowcpus(char *str)
-{
-	cpumask_t cpu_allow_map;
-	char buf[256];
-	int len;
-
-	cpus_clear(cpu_allow_map);
-	if (cpulist_parse(str, &cpu_allow_map) == 0) {
-		cpu_set(0, cpu_allow_map);
-		cpus_and(cpu_possible_map, cpu_possible_map, cpu_allow_map);
-		len = cpulist_scnprintf(buf, sizeof(buf)-1, &cpu_possible_map);
-		buf[len] = '\0';
-		pr_debug("Allowable CPUs: %s\n", buf);
-		return 1;
-	} else
-		return 0;
-}
-__setup("allowcpus=", allowcpus);
+#include <asm/amon.h>
+#include <asm/gic.h>
 
 static void ipi_call_function(unsigned int cpu)
 {
-	unsigned int action = 0;
-
 	pr_debug("CPU%d: %s cpu %d status %08x\n",
 		 smp_processor_id(), __func__, cpu, read_c0_status());
 
-	switch (cpu) {
-	case 0:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE0;
-		break;
-	case 1:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE1;
-		break;
-	case 2:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE2;
-		break;
-	case 3:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE3;
-		break;
-	}
-	gic_send_ipi(action);
+	gic_send_ipi(plat_ipi_call_int_xlate(cpu));
 }
 
 
 static void ipi_resched(unsigned int cpu)
 {
-	unsigned int action = 0;
-
 	pr_debug("CPU%d: %s cpu %d status %08x\n",
 		 smp_processor_id(), __func__, cpu, read_c0_status());
 
-	switch (cpu) {
-	case 0:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE0;
-		break;
-	case 1:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE1;
-		break;
-	case 2:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE2;
-		break;
-	case 3:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE3;
-		break;
-	}
-	gic_send_ipi(action);
+	gic_send_ipi(plat_ipi_resched_int_xlate(cpu));
 }
 
 /*
@@ -206,7 +150,7 @@ static void cmp_boot_secondary(int cpu, struct task_struct *idle)
 			   (unsigned long)(gp + sizeof(struct thread_info)));
 #endif
 
-	amon_cpu_start(cpu, pc, sp, gp, a0);
+	amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0);
 }
 
 /*
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 8a0626cbb10..c16bb6d6c25 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -465,11 +465,8 @@ void smtc_prepare_cpus(int cpus)
 	smtc_configure_tlb();
 
 	for (tc = 0, vpe = 0 ; (vpe < nvpe) && (tc < ntc) ; vpe++) {
-		/*
-		 * Set the MVP bits.
-		 */
-		settc(tc);
-		write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_MVP);
+		if (tcpervpe[vpe] == 0)
+			continue;
 		if (vpe != 0)
 			printk(", ");
 		printk("VPE %d: TC", vpe);
@@ -488,6 +485,12 @@ void smtc_prepare_cpus(int cpus)
 		}
 		if (vpe != 0) {
 			/*
+			 * Allow this VPE to control others.
+			 */
+			write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() |
+					      VPECONF0_MVP);
+
+			/*
 			 * Clear any stale software interrupts from VPE's Cause
 			 */
 			write_vpe_c0_cause(0);
diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c
index 58f5cd76c8c..d52ff77baf3 100644
--- a/arch/mips/kernel/stacktrace.c
+++ b/arch/mips/kernel/stacktrace.c
@@ -1,6 +1,4 @@
 /*
- * arch/mips/kernel/stacktrace.c
- *
  * Stack trace management functions
  *
  *  Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index 9021108eb9c..05dd170a83f 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -1,7 +1,7 @@
 /*
  * Count register synchronisation.
  *
- * All CPUs will have their count registers synchronised to the CPU0 expirelo
+ * All CPUs will have their count registers synchronised to the CPU0 next time
  * value. This can cause a small timewarp for CPU0. All other CPU's should
  * not have done anything significant (but they may have had interrupts
  * enabled briefly - prom_smp_finish() should not be responsible for enabling
@@ -13,21 +13,22 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irqflags.h>
-#include <linux/r4k-timer.h>
+#include <linux/cpumask.h>
 
+#include <asm/r4k-timer.h>
 #include <asm/atomic.h>
 #include <asm/barrier.h>
-#include <asm/cpumask.h>
 #include <asm/mipsregs.h>
 
-static atomic_t __initdata count_start_flag = ATOMIC_INIT(0);
-static atomic_t __initdata count_count_start = ATOMIC_INIT(0);
-static atomic_t __initdata count_count_stop = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_start_flag = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_count_start = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_count_stop = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0);
 
 #define COUNTON	100
 #define NR_LOOPS 5
 
-void __init synchronise_count_master(void)
+void __cpuinit synchronise_count_master(void)
 {
 	int i;
 	unsigned long flags;
@@ -42,19 +43,20 @@ void __init synchronise_count_master(void)
 	return;
 #endif
 
-	pr_info("Checking COUNT synchronization across %u CPUs: ",
-		num_online_cpus());
+	printk(KERN_INFO "Synchronize counters across %u CPUs: ",
+	       num_online_cpus());
 
 	local_irq_save(flags);
 
 	/*
 	 * Notify the slaves that it's time to start
 	 */
+	atomic_set(&count_reference, read_c0_count());
 	atomic_set(&count_start_flag, 1);
 	smp_wmb();
 
-	/* Count will be initialised to expirelo for all CPU's */
-	initcount = expirelo;
+	/* Count will be initialised to current timer for all CPU's */
+	initcount = read_c0_count();
 
 	/*
 	 * We loop a few times to get a primed instruction cache,
@@ -106,7 +108,7 @@ void __init synchronise_count_master(void)
 	printk("done.\n");
 }
 
-void __init synchronise_count_slave(void)
+void __cpuinit synchronise_count_slave(void)
 {
 	int i;
 	unsigned long flags;
@@ -131,8 +133,8 @@ void __init synchronise_count_slave(void)
 	while (!atomic_read(&count_start_flag))
 		mb();
 
-	/* Count will be initialised to expirelo for all CPU's */
-	initcount = expirelo;
+	/* Count will be initialised to next expire for all CPU's */
+	initcount = atomic_read(&count_reference);
 
 	ncpus = num_online_cpus();
 	for (i = 0; i < NR_LOOPS; i++) {
@@ -156,4 +158,3 @@ void __init synchronise_count_slave(void)
 	local_irq_restore(flags);
 }
 #undef NR_LOOPS
-#endif
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 3ca5f42e819..9a1ab7e87fd 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -73,7 +73,7 @@ static int major;
 static const int minor = 1;	/* fixed for now  */
 
 #ifdef CONFIG_MIPS_APSP_KSPD
- static struct kspd_notifications kspd_events;
+static struct kspd_notifications kspd_events;
 static int kspd_events_reqd = 0;
 #endif
 
@@ -155,10 +155,9 @@ struct {
 };
 
 static void release_progmem(void *ptr);
-extern void save_gp_address(unsigned int secbase, unsigned int rel);
 
 /* get the vpe associated with this minor */
-struct vpe *get_vpe(int minor)
+static struct vpe *get_vpe(int minor)
 {
 	struct vpe *v;
 
@@ -174,7 +173,7 @@ struct vpe *get_vpe(int minor)
 }
 
 /* get the vpe associated with this minor */
-struct tc *get_tc(int index)
+static struct tc *get_tc(int index)
 {
 	struct tc *t;
 
@@ -186,20 +185,8 @@ struct tc *get_tc(int index)
 	return NULL;
 }
 
-struct tc *get_tc_unused(void)
-{
-	struct tc *t;
-
-	list_for_each_entry(t, &vpecontrol.tc_list, list) {
-		if (t->state == TC_STATE_UNUSED)
-			return t;
-	}
-
-	return NULL;
-}
-
 /* allocate a vpe and associate it with this minor (or index) */
-struct vpe *alloc_vpe(int minor)
+static struct vpe *alloc_vpe(int minor)
 {
 	struct vpe *v;
 
@@ -216,7 +203,7 @@ struct vpe *alloc_vpe(int minor)
 }
 
 /* allocate a tc. At startup only tc0 is running, all other can be halted. */
-struct tc *alloc_tc(int index)
+static struct tc *alloc_tc(int index)
 {
 	struct tc *tc;
 
@@ -232,7 +219,7 @@ out:
 }
 
 /* clean up and free everything */
-void release_vpe(struct vpe *v)
+static void release_vpe(struct vpe *v)
 {
 	list_del(&v->list);
 	if (v->load_addr)
@@ -240,7 +227,7 @@ void release_vpe(struct vpe *v)
 	kfree(v);
 }
 
-void dump_mtregs(void)
+static void dump_mtregs(void)
 {
 	unsigned long val;
 
@@ -327,7 +314,8 @@ static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
 			    || (s->sh_flags & masks[m][1])
 			    || s->sh_entsize != ~0UL)
 				continue;
-			s->sh_entsize = get_offset(&mod->core_size, s);
+			s->sh_entsize =
+				get_offset((unsigned long *)&mod->core_size, s);
 		}
 
 		if (m == 0)
@@ -461,16 +449,15 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location,
 {
 	unsigned long insnlo = *location;
 	Elf32_Addr val, vallo;
+	struct mips_hi16 *l, *next;
 
 	/* Sign extend the addend we extract from the lo insn.  */
 	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
 
 	if (mips_hi16_list != NULL) {
-		struct mips_hi16 *l;
 
 		l = mips_hi16_list;
 		while (l != NULL) {
-			struct mips_hi16 *next;
 			unsigned long insn;
 
 			/*
@@ -480,7 +467,7 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location,
 				printk(KERN_DEBUG "VPE loader: "
 				       "apply_r_mips_lo16/hi16: \t"
 				       "inconsistent value information\n");
-				return -ENOEXEC;
+				goto out_free;
 			}
 
 			/*
@@ -518,6 +505,16 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location,
 	*location = insnlo;
 
 	return 0;
+
+out_free:
+	while (l != NULL) {
+		next = l->next;
+		kfree(l);
+		l = next;
+	}
+	mips_hi16_list = NULL;
+
+	return -ENOEXEC;
 }
 
 static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
@@ -541,7 +538,7 @@ static char *rstrs[] = {
 	[R_MIPS_PC16] = "MIPS_PC16"
 };
 
-int apply_relocations(Elf32_Shdr *sechdrs,
+static int apply_relocations(Elf32_Shdr *sechdrs,
 		      const char *strtab,
 		      unsigned int symindex,
 		      unsigned int relsec,
@@ -586,7 +583,7 @@ int apply_relocations(Elf32_Shdr *sechdrs,
 	return 0;
 }
 
-void save_gp_address(unsigned int secbase, unsigned int rel)
+static inline void save_gp_address(unsigned int secbase, unsigned int rel)
 {
 	gp_addr = secbase + rel;
 	gp_offs = gp_addr - (secbase & 0xffff0000);
@@ -1387,7 +1384,7 @@ static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr,
 	return len;
 
 out_einval:
-	return -EINVAL;;
+	return -EINVAL;
 }
 
 static struct device_attribute vpe_class_attributes[] = {
diff --git a/arch/mips/mipssim/sim_time.c b/arch/mips/mipssim/sim_time.c
index 0cea932f124..5492c42f765 100644
--- a/arch/mips/mipssim/sim_time.c
+++ b/arch/mips/mipssim/sim_time.c
@@ -89,13 +89,13 @@ unsigned __cpuinit get_c0_compare_int(void)
 	if (cpu_has_veic) {
 		set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
 		mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
-	} else {
-#endif
-	       {
-		if (cpu_has_vint)
-			set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
-		mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+
+		return mips_cpu_timer_irq;
 	}
+#endif
+	if (cpu_has_vint)
+		set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
+	mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
 
 	return mips_cpu_timer_irq;
 }
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index b165cdcb281..10ab69f7183 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -289,7 +289,7 @@ static void  cache_parity_error_octeon(int non_recoverable)
 }
 
 /**
- * Called when the the exception is not recoverable
+ * Called when the the exception is recoverable
  */
 
 asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -298,7 +298,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
 }
 
 /**
- * Called when the the exception is recoverable
+ * Called when the the exception is not recoverable
  */
 
 asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/mm/extable.c b/arch/mips/mm/extable.c
index 297fb9f390d..9d25d2ba4b9 100644
--- a/arch/mips/mm/extable.c
+++ b/arch/mips/mm/extable.c
@@ -1,5 +1,9 @@
 /*
- * linux/arch/mips/mm/extable.c
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 99, 2001 - 2004 Ralf Baechle <ralf@linux-mips.org>
  */
 #include <linux/module.h>
 #include <linux/spinlock.h>
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index 6751ce9ede9..f956ecbb813 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -171,6 +171,7 @@ out_of_memory:
 	 * We ran out of memory, call the OOM killer, and return the userspace
 	 * (which will retry the fault, or kill us if we got oom-killed).
 	 */
+	up_read(&mm->mmap_sem);
 	pagefault_out_of_memory();
 	return;
 
diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c
index 471c09aa161..8c2834f5919 100644
--- a/arch/mips/mm/hugetlbpage.c
+++ b/arch/mips/mm/hugetlbpage.c
@@ -16,7 +16,6 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
-#include <linux/smp_lock.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/sysctl.h>
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 475038a141a..27c807b67fe 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -30,6 +30,7 @@
 #include <asm/cacheflush.h>
 #include <asm/traps.h>
 
+#include <asm/gcmpregs.h>
 #include <asm/mips-boards/prom.h>
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/bonito64.h>
@@ -192,6 +193,8 @@ extern struct plat_smp_ops msmtc_smp_ops;
 
 void __init prom_init(void)
 {
+	int result;
+
 	prom_argc = fw_arg0;
 	_prom_argv = (int *) fw_arg1;
 	_prom_envp = (int *) fw_arg2;
@@ -358,12 +361,21 @@ void __init prom_init(void)
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	console_config();
 #endif
+	/* Early detection of CMP support */
+	result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
+
 #ifdef CONFIG_MIPS_CMP
-	register_smp_ops(&cmp_smp_ops);
+	if (result)
+		register_smp_ops(&cmp_smp_ops);
 #endif
 #ifdef CONFIG_MIPS_MT_SMP
+#ifdef CONFIG_MIPS_CMP
+	if (!result)
+		register_smp_ops(&vsmp_smp_ops);
+#else
 	register_smp_ops(&vsmp_smp_ops);
 #endif
+#endif
 #ifdef CONFIG_MIPS_MT_SMTC
 	register_smp_ops(&msmtc_smp_ops);
 #endif
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index b4eaf137e4a..3e0a9b35ba5 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -333,6 +333,21 @@ static struct irqaction irq_call = {
 };
 #endif /* CONFIG_MIPS_MT_SMP */
 
+static int gic_resched_int_base;
+static int gic_call_int_base;
+#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
+#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
+
+unsigned int plat_ipi_call_int_xlate(unsigned int cpu)
+{
+	return GIC_CALL_INT(cpu);
+}
+
+unsigned int plat_ipi_resched_int_xlate(unsigned int cpu)
+{
+	return GIC_RESCHED_INT(cpu);
+}
+
 static struct irqaction i8259irq = {
 	.handler = no_action,
 	.name = "XT-PIC cascade"
@@ -370,7 +385,7 @@ static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
  * Interrupts and CPUs/Core Interrupts. The nature of the External
  * Interrupts is also defined here - polarity/trigger.
  */
-static struct gic_intr_map gic_intr_map[] = {
+static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
 	{ GIC_EXT_INTR(0), 	X,	X,		X, 		X,		0 },
 	{ GIC_EXT_INTR(1), 	X,	X,		X, 		X,		0 },
 	{ GIC_EXT_INTR(2), 	X,	X,		X, 		X,		0 },
@@ -387,21 +402,14 @@ static struct gic_intr_map gic_intr_map[] = {
 	{ GIC_EXT_INTR(13), 	0,	GIC_MAP_TO_NMI_MSK,	GIC_POL_POS, GIC_TRIG_LEVEL,	0 },
 	{ GIC_EXT_INTR(14), 	0,	GIC_MAP_TO_NMI_MSK,	GIC_POL_POS, GIC_TRIG_LEVEL,	0 },
 	{ GIC_EXT_INTR(15), 	X,	X,		X, 		X,		0 },
-	{ GIC_EXT_INTR(16), 	0,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(17), 	0,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(18), 	1,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(19), 	1,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(20), 	2,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(21), 	2,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(22), 	3,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(23), 	3,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+/* This is the end of the general interrupts now we do IPI ones */
 };
 #endif
 
 /*
  * GCMP needs to be detected before any SMP initialisation
  */
-static int __init gcmp_probe(unsigned long addr, unsigned long size)
+int __init gcmp_probe(unsigned long addr, unsigned long size)
 {
 	if (gcmp_present >= 0)
 		return gcmp_present;
@@ -416,28 +424,36 @@ static int __init gcmp_probe(unsigned long addr, unsigned long size)
 }
 
 #if defined(CONFIG_MIPS_MT_SMP)
+static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin)
+{
+	int intr = baseintr + cpu;
+	gic_intr_map[intr].intrnum = GIC_EXT_INTR(intr);
+	gic_intr_map[intr].cpunum = cpu;
+	gic_intr_map[intr].pin = cpupin;
+	gic_intr_map[intr].polarity = GIC_POL_POS;
+	gic_intr_map[intr].trigtype = GIC_TRIG_EDGE;
+	gic_intr_map[intr].ipiflag = 1;
+	ipi_map[cpu] |= (1 << (cpupin + 2));
+}
+
 static void __init fill_ipi_map(void)
 {
-	int i;
+	int cpu;
 
-	for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) {
-		if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X))
-			ipi_map[gic_intr_map[i].cpunum] |=
-				(1 << (gic_intr_map[i].pin + 2));
+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+		fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1);
+		fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2);
 	}
 }
 #endif
 
 void __init arch_init_irq(void)
 {
-	int gic_present, gcmp_present;
-
 	init_i8259_irqs();
 
 	if (!cpu_has_veic)
 		mips_cpu_irq_init();
 
-	gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
 	if (gcmp_present)  {
 		GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK;
 		gic_present = 1;
@@ -514,24 +530,10 @@ void __init arch_init_irq(void)
 	if (gic_present) {
 		/* FIXME */
 		int i;
-		struct {
-			unsigned int resched;
-			unsigned int call;
-		} ipiirq[] = {
-			{
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE0,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE0},
-			{
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE1,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE1
-			}, {
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE2,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE2
-			}, {
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE3,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE3
-			}
-		};
+
+		gic_call_int_base = GIC_NUM_INTRS - NR_CPUS;
+		gic_resched_int_base = gic_call_int_base - NR_CPUS;
+
 		fill_ipi_map();
 		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
 		if (!gcmp_present) {
@@ -553,12 +555,15 @@ void __init arch_init_irq(void)
 		printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
 		write_c0_status(0x1100dc00);
 		printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
-		for (i = 0; i < ARRAY_SIZE(ipiirq); i++) {
-			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched);
-			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call);
-
-			set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq);
-			set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq);
+		for (i = 0; i < NR_CPUS; i++) {
+			setup_irq(MIPS_GIC_IRQ_BASE +
+					GIC_RESCHED_INT(i), &irq_resched);
+			setup_irq(MIPS_GIC_IRQ_BASE +
+					GIC_CALL_INT(i), &irq_call);
+			set_irq_handler(MIPS_GIC_IRQ_BASE +
+					GIC_RESCHED_INT(i), handle_percpu_irq);
+			set_irq_handler(MIPS_GIC_IRQ_BASE +
+					GIC_CALL_INT(i), handle_percpu_irq);
 		}
 	} else {
 		/* set up ipi interrupts */
diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c
index 42dee4da37b..f48d60e8429 100644
--- a/arch/mips/mti-malta/malta-reset.c
+++ b/arch/mips/mti-malta/malta-reset.c
@@ -28,9 +28,6 @@
 #include <asm/reboot.h>
 #include <asm/mips-boards/generic.h>
 
-static void mips_machine_restart(char *command);
-static void mips_machine_halt(void);
-
 static void mips_machine_restart(char *command)
 {
 	unsigned int __iomem *softres_reg =
diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c
index 8df43e9e4d9..18b19278487 100644
--- a/arch/mips/nxp/pnx8550/common/time.c
+++ b/arch/mips/nxp/pnx8550/common/time.c
@@ -138,7 +138,7 @@ __init void plat_time_init(void)
 	 * HZ timer interrupts per second.
 	 */
 	mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
-	cpj = (mips_hpt_frequency + HZ / 2) / HZ;
+	cpj = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
 	write_c0_count(0);
 	timer_ack();
 
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index e8a97f59e06..63d8a297c58 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -52,3 +52,8 @@ obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
 obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
 obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
 obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= pci-octeon.o pcie-octeon.o
+
+ifdef CONFIG_PCI_MSI
+obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
+endif
diff --git a/arch/mips/pci/fixup-capcella.c b/arch/mips/pci/fixup-capcella.c
index 1416bca6d1a..1c02f573736 100644
--- a/arch/mips/pci/fixup-capcella.c
+++ b/arch/mips/pci/fixup-capcella.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-cappcela.c, The ZAO Networks Capcella specific PCI fixups.
  *
- *  Copyright (C) 2002,2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002,2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c
index fba5aad00d5..0d9ccf4dfc5 100644
--- a/arch/mips/pci/fixup-emma2rh.c
+++ b/arch/mips/pci/fixup-emma2rh.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/pci/fixup-emma2rh.c
- *      This file defines the PCI configration.
- *
  *  Copyright (C) NEC Electronics Corporation 2004-2006
  *
  *  This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c
diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c
index 59115962572..e08f49cb687 100644
--- a/arch/mips/pci/fixup-mpc30x.c
+++ b/arch/mips/pci/fixup-mpc30x.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-mpc30x.c, The Victor MP-C303/304 specific PCI fixups.
  *
- *  Copyright (C) 2002,2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002,2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-sb1250.c b/arch/mips/pci/fixup-sb1250.c
index 0ad39e53f7b..f0bb9146e6c 100644
--- a/arch/mips/pci/fixup-sb1250.c
+++ b/arch/mips/pci/fixup-sb1250.c
@@ -1,6 +1,4 @@
 /*
- *	arch/mips/pci/fixup-sb1250.c
- *
  *	Copyright (C) 2004, 2006  MIPS Technologies, Inc.  All rights reserved.
  *	    Author:	Maciej W. Rozycki <macro@mips.com>
  *
diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c
index ed87733f679..8084b17d440 100644
--- a/arch/mips/pci/fixup-tb0219.c
+++ b/arch/mips/pci/fixup-tb0219.c
@@ -2,7 +2,7 @@
  *  fixup-tb0219.c, The TANBAC TB0219 specific PCI fixups.
  *
  *  Copyright (C) 2003  Megasolution Inc. <matsu@megasolution.jp>
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c
index e3eedf4bf9b..4196ccf3ea3 100644
--- a/arch/mips/pci/fixup-tb0226.c
+++ b/arch/mips/pci/fixup-tb0226.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-tb0226.c, The TANBAC TB0226 specific PCI fixups.
  *
- *  Copyright (C) 2002-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c
index 267ab3dc3d4..2fe29db4372 100644
--- a/arch/mips/pci/fixup-tb0287.c
+++ b/arch/mips/pci/fixup-tb0287.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-tb0287.c, The TANBAC TB0287 specific PCI fixups.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/msi.c b/arch/mips/pci/msi-octeon.c
index 964b03b75a8..03742e64765 100644
--- a/arch/mips/cavium-octeon/msi.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -16,8 +16,7 @@
 #include <asm/octeon/cvmx-pci-defs.h>
 #include <asm/octeon/cvmx-npei-defs.h>
 #include <asm/octeon/cvmx-pexp-defs.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
 
 /*
  * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
@@ -47,8 +46,8 @@ static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock);
  * programming the MSI control bits [6:4] before calling
  * pci_enable_msi().
  *
- * @param dev    Device requesting MSI interrupts
- * @param desc   MSI descriptor
+ * @dev:    Device requesting MSI interrupts
+ * @desc:   MSI descriptor
  *
  * Returns 0 on success.
  */
@@ -213,14 +212,9 @@ void arch_teardown_msi_irq(unsigned int irq)
 }
 
 
-/**
+/*
  * Called by the interrupt handling code when an MSI interrupt
  * occurs.
- *
- * @param cpl
- * @param dev_id
- *
- * @return
  */
 static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id)
 {
@@ -256,31 +250,37 @@ static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id)
 }
 
 
-/**
+/*
  * Initializes the MSI interrupt handling code
- *
- * @return
  */
 int octeon_msi_initialize(void)
 {
-	int r;
 	if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
-		r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
+		if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
 				IRQF_SHARED,
-				"MSI[0:63]", octeon_msi_interrupt);
+				"MSI[0:63]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
 	} else if (octeon_is_pci_host()) {
-		r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
+		if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
 				IRQF_SHARED,
-				"MSI[0:15]", octeon_msi_interrupt);
-		r += request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
-				 IRQF_SHARED,
-				 "MSI[16:31]", octeon_msi_interrupt);
-		r += request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
-				 IRQF_SHARED,
-				 "MSI[32:47]", octeon_msi_interrupt);
-		r += request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
-				 IRQF_SHARED,
-				 "MSI[48:63]", octeon_msi_interrupt);
+				"MSI[0:15]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
+				IRQF_SHARED,
+				"MSI[16:31]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
+				IRQF_SHARED,
+				"MSI[32:47]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
+				IRQF_SHARED,
+				"MSI[48:63]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed");
+
 	}
 	return 0;
 }
diff --git a/arch/mips/pci/ops-emma2rh.c b/arch/mips/pci/ops-emma2rh.c
index 5947a70b0b7..710aef5c070 100644
--- a/arch/mips/pci/ops-emma2rh.c
+++ b/arch/mips/pci/ops-emma2rh.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/pci/ops-emma2rh.c
- *      This file defines the PCI operation for EMMA2RH.
- *
  *  Copyright (C) NEC Electronics Corporation 2004-2006
  *
  *  This file is based on the arch/mips/pci/ops-vr41xx.c
diff --git a/arch/mips/pci/ops-vr41xx.c b/arch/mips/pci/ops-vr41xx.c
index 900c6b32576..28962a7c660 100644
--- a/arch/mips/pci/ops-vr41xx.c
+++ b/arch/mips/pci/ops-vr41xx.c
@@ -2,8 +2,8 @@
  *  ops-vr41xx.c, PCI configuration routines for the PCIU of NEC VR4100 series.
  *
  *  Copyright (C) 2001-2003 MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,7 +21,7 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  */
 #include <linux/pci.h>
diff --git a/arch/mips/pci/pci-emma2rh.c b/arch/mips/pci/pci-emma2rh.c
index 2df4190232c..773e34ff4d1 100644
--- a/arch/mips/pci/pci-emma2rh.c
+++ b/arch/mips/pci/pci-emma2rh.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/pci/pci-emma2rh.c
- *      This file defines the PCI configration.
- *
  *  Copyright (C) NEC Electronics Corporation 2004-2006
  *
  *  This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c
diff --git a/arch/mips/cavium-octeon/pci.c b/arch/mips/pci/pci-octeon.c
index 67c0ff5e92f..9cb0c807f56 100644
--- a/arch/mips/cavium-octeon/pci.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -17,8 +17,7 @@
 #include <asm/octeon/octeon.h>
 #include <asm/octeon/cvmx-npi-defs.h>
 #include <asm/octeon/cvmx-pci-defs.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
 
 #define USE_OCTEON_INTERNAL_ARBITER
 
@@ -54,6 +53,126 @@ union octeon_pci_address {
 	} s;
 };
 
+int __initdata (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+					 u8 slot, u8 pin);
+enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
+
+/**
+ * Map a PCI device to the appropriate interrupt line
+ *
+ * @dev:    The Linux PCI device structure for the device to map
+ * @slot:   The slot number for this device on __BUS 0__. Linux
+ *               enumerates through all the bridges and figures out the
+ *               slot on Bus 0 where this device eventually hooks to.
+ * @pin:    The PCI interrupt pin read from the device, then swizzled
+ *               as it goes through each bridge.
+ * Returns Interrupt number for the device
+ */
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (octeon_pcibios_map_irq)
+		return octeon_pcibios_map_irq(dev, slot, pin);
+	else
+		panic("octeon_pcibios_map_irq not set.");
+}
+
+
+/*
+ * Called to perform platform specific PCI setup
+ */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	uint16_t config;
+	uint32_t dconfig;
+	int pos;
+	/*
+	 * Force the Cache line setting to 64 bytes. The standard
+	 * Linux bus scan doesn't seem to set it. Octeon really has
+	 * 128 byte lines, but Intel bridges get really upset if you
+	 * try and set values above 64 bytes. Value is specified in
+	 * 32bit words.
+	 */
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
+	/* Set latency timers for all devices */
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
+
+	/* Enable reporting System errors and parity errors on all devices */
+	/* Enable parity checking and error reporting */
+	pci_read_config_word(dev, PCI_COMMAND, &config);
+	config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+	pci_write_config_word(dev, PCI_COMMAND, config);
+
+	if (dev->subordinate) {
+		/* Set latency timers on sub bridges */
+		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
+		/* More bridge error detection */
+		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
+		config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
+		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
+	}
+
+	/* Enable the PCIe normal error reporting */
+	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	if (pos) {
+		/* Update Device Control */
+		pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
+		/* Correctable Error Reporting */
+		config |= PCI_EXP_DEVCTL_CERE;
+		/* Non-Fatal Error Reporting */
+		config |= PCI_EXP_DEVCTL_NFERE;
+		/* Fatal Error Reporting */
+		config |= PCI_EXP_DEVCTL_FERE;
+		/* Unsupported Request */
+		config |= PCI_EXP_DEVCTL_URRE;
+		pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
+	}
+
+	/* Find the Advanced Error Reporting capability */
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+	if (pos) {
+		/* Clear Uncorrectable Error Status */
+		pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+				      &dconfig);
+		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+				       dconfig);
+		/* Enable reporting of all uncorrectable errors */
+		/* Uncorrectable Error Mask - turned on bits disable errors */
+		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
+		/*
+		 * Leave severity at HW default. This only controls if
+		 * errors are reported as uncorrectable or
+		 * correctable, not if the error is reported.
+		 */
+		/* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
+		/* Clear Correctable Error Status */
+		pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
+		pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
+		/* Enable reporting of all correctable errors */
+		/* Correctable Error Mask - turned on bits disable errors */
+		pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
+		/* Advanced Error Capabilities */
+		pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
+		/* ECRC Generation Enable */
+		if (config & PCI_ERR_CAP_ECRC_GENC)
+			config |= PCI_ERR_CAP_ECRC_GENE;
+		/* ECRC Check Enable */
+		if (config & PCI_ERR_CAP_ECRC_CHKC)
+			config |= PCI_ERR_CAP_ECRC_CHKE;
+		pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
+		/* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
+		/* Report all errors to the root complex */
+		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
+				       PCI_ERR_ROOT_CMD_COR_EN |
+				       PCI_ERR_ROOT_CMD_NONFATAL_EN |
+				       PCI_ERR_ROOT_CMD_FATAL_EN);
+		/* Clear the Root status register */
+		pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
+		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
+	}
+
+	return 0;
+}
+
 /**
  * Return the mapping of PCI device number to IRQ line. Each
  * character in the return string represents the interrupt
@@ -136,9 +255,8 @@ int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev,
 }
 
 
-/**
+/*
  * Read a value from configuration space
- *
  */
 static int octeon_read_config(struct pci_bus *bus, unsigned int devfn,
 			      int reg, int size, u32 *val)
@@ -174,15 +292,8 @@ static int octeon_read_config(struct pci_bus *bus, unsigned int devfn,
 }
 
 
-/**
+/*
  * Write a value to PCI configuration space
- *
- * @bus:
- * @devfn:
- * @reg:
- * @size:
- * @val:
- * Returns
  */
 static int octeon_write_config(struct pci_bus *bus, unsigned int devfn,
 			       int reg, int size, u32 val)
@@ -251,10 +362,8 @@ static struct pci_controller octeon_pci_controller = {
 };
 
 
-/**
+/*
  * Low level initialize the Octeon PCI controller
- *
- * Returns
  */
 static void octeon_pci_initialize(void)
 {
@@ -398,7 +507,7 @@ static void octeon_pci_initialize(void)
 		pci_int_arb_cfg.s.en = 1;	/* Internal arbiter enable */
 		cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64);
 	}
-#endif				/* USE_OCTEON_INTERNAL_ARBITER */
+#endif	/* USE_OCTEON_INTERNAL_ARBITER */
 
 	/*
 	 * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE,
@@ -457,10 +566,8 @@ static void octeon_pci_initialize(void)
 }
 
 
-/**
+/*
  * Initialize the Octeon PCI controller
- *
- * Returns
  */
 static int __init octeon_pci_setup(void)
 {
diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c
index aaa90059679..a5807406a7f 100644
--- a/arch/mips/pci/pci-tx4927.c
+++ b/arch/mips/pci/pci-tx4927.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/mips/pci/pci-tx4927.c
- *
  * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
  *	    and RBTX49xx patch from CELF patch archive.
  *
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
index 1ea257bc3b8..20e45f30b2e 100644
--- a/arch/mips/pci/pci-tx4938.c
+++ b/arch/mips/pci/pci-tx4938.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/mips/pci/pci-tx4938.c
- *
  * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
  *	    and RBTX49xx patch from CELF patch archive.
  *
diff --git a/arch/mips/pci/pci-tx4939.c b/arch/mips/pci/pci-tx4939.c
index 5fecf1cdc32..9ef840693ba 100644
--- a/arch/mips/pci/pci-tx4939.c
+++ b/arch/mips/pci/pci-tx4939.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/mips/pci/pci-tx4939.c
- *
  * Based on linux/arch/mips/txx9/rbtx4939/setup.c,
  *	    and RBTX49xx patch from CELF patch archive.
  *
diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c
index d1e049b55f3..56525711f8b 100644
--- a/arch/mips/pci/pci-vr41xx.c
+++ b/arch/mips/pci/pci-vr41xx.c
@@ -2,8 +2,8 @@
  *  pci-vr41xx.c, PCI Control Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2001-2003 MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2004-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2004-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *  Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -22,7 +22,7 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  */
 #include <linux/init.h>
diff --git a/arch/mips/pci/pci-vr41xx.h b/arch/mips/pci/pci-vr41xx.h
index 8a35e32b837..6b1ae2eb1c0 100644
--- a/arch/mips/pci/pci-vr41xx.h
+++ b/arch/mips/pci/pci-vr41xx.h
@@ -2,8 +2,8 @@
  *  pci-vr41xx.h, Include file for PCI Control Unit of the NEC VR4100 series.
  *
  *  Copyright (C) 2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/pcie.c b/arch/mips/pci/pcie-octeon.c
index 49d14081b3b..6aa5c542d52 100644
--- a/arch/mips/cavium-octeon/pcie.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -18,8 +18,7 @@
 #include <asm/octeon/cvmx-pescx-defs.h>
 #include <asm/octeon/cvmx-pexp-defs.h>
 #include <asm/octeon/cvmx-helper-errata.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
 
 union cvmx_pcie_address {
 	uint64_t u64;
@@ -976,13 +975,13 @@ static int cvmx_pcie_rc_initialize(int pcie_port)
 /**
  * Map a PCI device to the appropriate interrupt line
  *
- * @param dev    The Linux PCI device structure for the device to map
- * @param slot   The slot number for this device on __BUS 0__. Linux
+ * @dev:    The Linux PCI device structure for the device to map
+ * @slot:   The slot number for this device on __BUS 0__. Linux
  *               enumerates through all the bridges and figures out the
  *               slot on Bus 0 where this device eventually hooks to.
- * @param pin    The PCI interrupt pin read from the device, then swizzled
+ * @pin:    The PCI interrupt pin read from the device, then swizzled
  *               as it goes through each bridge.
- * @return Interrupt number for the device
+ * Returns Interrupt number for the device
  */
 int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev,
 				       u8 slot, u8 pin)
@@ -1025,12 +1024,12 @@ int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev,
 /**
  * Read a value from configuration space
  *
- * @param bus
- * @param devfn
- * @param reg
- * @param size
- * @param val
- * @return
+ * @bus:
+ * @devfn:
+ * @reg:
+ * @size:
+ * @val:
+ * Returns
  */
 static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
 					  unsigned int devfn, int reg, int size,
@@ -1041,19 +1040,29 @@ static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
 	int bus_number = bus->number;
 
 	/*
-	 * We need to force the bus number to be zero on the root
-	 * bus. Linux numbers the 2nd root bus to start after all
-	 * buses on root 0.
+	 * For the top level bus make sure our hardware bus number
+	 * matches the software one.
 	 */
-	if (bus->parent == NULL)
-		bus_number = 0;
+	if (bus->parent == NULL) {
+		union cvmx_pciercx_cfg006 pciercx_cfg006;
+		pciercx_cfg006.u32 = cvmx_pcie_cfgx_read(pcie_port,
+			CVMX_PCIERCX_CFG006(pcie_port));
+		if (pciercx_cfg006.s.pbnum != bus_number) {
+			pciercx_cfg006.s.pbnum = bus_number;
+			pciercx_cfg006.s.sbnum = bus_number;
+			pciercx_cfg006.s.subbnum = bus_number;
+			cvmx_pcie_cfgx_write(pcie_port,
+				CVMX_PCIERCX_CFG006(pcie_port),
+				pciercx_cfg006.u32);
+		}
+	}
 
 	/*
 	 * PCIe only has a single device connected to Octeon. It is
 	 * always device ID 0. Don't bother doing reads for other
 	 * device IDs on the first segment.
 	 */
-	if ((bus_number == 0) && (devfn >> 3 != 0))
+	if ((bus->parent == NULL) && (devfn >> 3 != 0))
 		return PCIBIOS_FUNC_NOT_SUPPORTED;
 
 	/*
@@ -1071,7 +1080,7 @@ static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
 		 * bridge only respondes to device ID 0, function
 		 * 0-1
 		 */
-		if ((bus_number == 0) && (devfn >= 2))
+		if ((bus->parent == NULL) && (devfn >= 2))
 			return PCIBIOS_FUNC_NOT_SUPPORTED;
 		/*
 		 * The PCI-X slots are device ID 2,3. Choose one of
@@ -1156,25 +1165,18 @@ static int octeon_pcie1_read_config(struct pci_bus *bus, unsigned int devfn,
 /**
  * Write a value to PCI configuration space
  *
- * @param bus
- * @param devfn
- * @param reg
- * @param size
- * @param val
- * @return
+ * @bus:
+ * @devfn:
+ * @reg:
+ * @size:
+ * @val:
+ * Returns
  */
 static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus,
 					   unsigned int devfn, int reg,
 					   int size, u32 val)
 {
 	int bus_number = bus->number;
-	/*
-	 * We need to force the bus number to be zero on the root
-	 * bus. Linux numbers the 2nd root bus to start after all
-	 * busses on root 0.
-	 */
-	if (bus->parent == NULL)
-		bus_number = 0;
 
 	switch (size) {
 	case 4:
@@ -1254,7 +1256,7 @@ static struct pci_controller octeon_pcie1_controller = {
 /**
  * Initialize the Octeon PCIe controllers
  *
- * @return
+ * Returns
  */
 static int __init octeon_pcie_setup(void)
 {
diff --git a/arch/mips/pmc-sierra/msp71xx/gpio.c b/arch/mips/pmc-sierra/msp71xx/gpio.c
index 69848c5813e..aaccbe52438 100644
--- a/arch/mips/pmc-sierra/msp71xx/gpio.c
+++ b/arch/mips/pmc-sierra/msp71xx/gpio.c
@@ -1,6 +1,4 @@
 /*
- * @file /arch/mips/pmc-sierra/msp71xx/gpio.c
- *
  * Generic PMC MSP71xx GPIO handling. These base gpio are controlled by two
  * types of registers. The data register sets the output level when in output
  * mode and when in input mode will contain the value at the input. The config
diff --git a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c
index fc6dbc6cf1c..2a99f360fae 100644
--- a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c
+++ b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c
@@ -1,6 +1,4 @@
 /*
- * @file /arch/mips/pmc-sierra/msp71xx/gpio_extended.c
- *
  * Generic PMC MSP71xx EXTENDED (EXD) GPIO handling. The extended gpio is
  * a set of hardware registers that have no need for explicit locking as
  * it is handled by unique method of writing individual set/clr bits.
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c
index f5f1b8d2bb9..61f39023234 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c
@@ -45,13 +45,6 @@ static inline void mask_msp_slp_irq(unsigned int irq)
  */
 static inline void ack_msp_slp_irq(unsigned int irq)
 {
-	mask_slp_irq(irq);
-
-	/*
-	 * only really necessary for 18, 16-14 and sometimes 3:0 (since
-	 * these can be edge sensitive) but it doesn't hurt  for the others.
-	 */
-
 	/* check for PER interrupt range */
 	if (irq < MSP_PER_INTBASE)
 		*SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE));
@@ -62,8 +55,7 @@ static inline void ack_msp_slp_irq(unsigned int irq)
 static struct irq_chip msp_slp_irq_controller = {
 	.name = "MSP_SLP",
 	.ack = ack_msp_slp_irq,
-	.mask = ack_msp_slp_irq,
-	.mask_ack = ack_msp_slp_irq,
+	.mask = mask_msp_slp_irq,
 	.unmask = unmask_msp_slp_irq,
 };
 
@@ -79,7 +71,7 @@ void __init msp_slp_irq_init(void)
 
 	/* initialize all the IRQ descriptors */
 	for (i = MSP_SLP_INTBASE; i < MSP_PER_INTBASE + 32; i++)
-		set_irq_chip_and_handler(i, &msp_slp_irq_controller
+		set_irq_chip_and_handler(i, &msp_slp_irq_controller,
 					 handle_level_irq);
 }
 
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
index caf5e9a0acc..fc990cb3194 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
@@ -1,6 +1,4 @@
 /*
- *  arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
- *
  *  Copyright (C) 2003 PMC-Sierra Inc.
  *  Author: Manish Lachwani (lachwani@pmc-sierra.com)
  *
diff --git a/arch/mips/sibyte/swarm/swarm-i2c.c b/arch/mips/sibyte/swarm/swarm-i2c.c
index 4282ac9d01d..062505054d4 100644
--- a/arch/mips/sibyte/swarm/swarm-i2c.c
+++ b/arch/mips/sibyte/swarm/swarm-i2c.c
@@ -1,6 +1,4 @@
 /*
- *	arch/mips/sibyte/swarm/swarm-i2c.c
- *
  *	Broadcom BCM91250A (SWARM), etc. I2C platform setup.
  *
  *	Copyright (c) 2008  Maciej W. Rozycki
diff --git a/arch/mips/txx9/generic/mem_tx4927.c b/arch/mips/txx9/generic/mem_tx4927.c
index ef6ea6e9787..70f9626f822 100644
--- a/arch/mips/txx9/generic/mem_tx4927.c
+++ b/arch/mips/txx9/generic/mem_tx4927.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/mips/txx9/generic/mem_tx4927.c
- *
  * common tx4927 memory interface
  *
  * Author: MontaVista Software, Inc.
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 3b7d77d61ce..a205e2ba8e7 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/mips/txx9/generic/setup.c
- *
  * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
  *	    and RBTX49xx patch from CELF patch archive.
  *
diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
index c033ffe71cd..b0c241ecf60 100644
--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -512,10 +512,10 @@ static void __init rbtx4939_setup(void)
 	rbtx4939_ebusc_setup();
 	/* always enable ATA0 */
 	txx9_set64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_ATA0MODE);
-	rbtx4939_update_ioc_pen();
 	if (txx9_master_clock == 0)
 		txx9_master_clock = 20000000;
 	tx4939_setup();
+	rbtx4939_update_ioc_pen();
 #ifdef HAVE_RBTX4939_IOSWAB
 	ioswabw = rbtx4939_ioswabw;
 	__mem_ioswabw = rbtx4939_mem_ioswabw;
diff --git a/arch/mips/vr41xx/casio-e55/setup.c b/arch/mips/vr41xx/casio-e55/setup.c
index 6d9bab89058..719f4a5b984 100644
--- a/arch/mips/vr41xx/casio-e55/setup.c
+++ b/arch/mips/vr41xx/casio-e55/setup.c
@@ -1,7 +1,7 @@
 /*
  *  setup.c, Setup for the CASIO CASSIOPEIA E-11/15/55/65.
  *
- *  Copyright (C) 2002-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/bcu.c b/arch/mips/vr41xx/common/bcu.c
index d77c330a0d5..6346c59c9f9 100644
--- a/arch/mips/vr41xx/common/bcu.c
+++ b/arch/mips/vr41xx/common/bcu.c
@@ -2,8 +2,8 @@
  *  bcu.c, Bus Control Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
- *  Copyright (C) 2003-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2003-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  *  - Added support for NEC VR4111 and VR4121.
  *
- *  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Yoichi Yuasa <yuasa@linux-mips.org>
  *  - Added support for NEC VR4133.
  */
 #include <linux/kernel.h>
diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c
index ad0e8e3409d..8ba7d04a5ec 100644
--- a/arch/mips/vr41xx/common/cmu.c
+++ b/arch/mips/vr41xx/common/cmu.c
@@ -2,8 +2,8 @@
  *  cmu.c, Clock Mask Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2001-2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copuright (C) 2003-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copuright (C) 2003-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  *  - Added support for NEC VR4111 and VR4121.
  *
- *  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Yoichi Yuasa <yuasa@linux-mips.org>
  *  - Added support for NEC VR4133.
  */
 #include <linux/init.h>
diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c
index 2b272f1496f..22cc6f2100a 100644
--- a/arch/mips/vr41xx/common/giu.c
+++ b/arch/mips/vr41xx/common/giu.c
@@ -1,7 +1,7 @@
 /*
  *  NEC VR4100 series GIU platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c
index 3f23d9fda66..6d39e222b17 100644
--- a/arch/mips/vr41xx/common/icu.c
+++ b/arch/mips/vr41xx/common/icu.c
@@ -2,8 +2,8 @@
  *  icu.c, Interrupt Control Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2001-2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2003-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2003-2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  *  - Added support for NEC VR4111 and VR4121.
  *
- *  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Yoichi Yuasa <yuasa@linux-mips.org>
  *  - Coped with INTASSIGN of NEC VR4133.
  */
 #include <linux/errno.h>
diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c
index c64995342ba..1386e6f081c 100644
--- a/arch/mips/vr41xx/common/init.c
+++ b/arch/mips/vr41xx/common/init.c
@@ -1,7 +1,7 @@
 /*
  *  init.c, Common initialization routines for NEC VR4100 series.
  *
- *  Copyright (C) 2003-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2003-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c
index 9cc389109b1..bef06872f01 100644
--- a/arch/mips/vr41xx/common/irq.c
+++ b/arch/mips/vr41xx/common/irq.c
@@ -1,7 +1,7 @@
 /*
  *  Interrupt handing routines for NEC VR4100 series.
  *
- *  Copyright (C) 2005-2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005-2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c
index 028aaf75eb2..692b4e85b7f 100644
--- a/arch/mips/vr41xx/common/pmu.c
+++ b/arch/mips/vr41xx/common/pmu.c
@@ -1,7 +1,7 @@
 /*
  *  pmu.c, Power Management Unit routines for NEC VR4100 series.
  *
- *  Copyright (C) 2003-2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2003-2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/rtc.c b/arch/mips/vr41xx/common/rtc.c
index 9f26c14edca..ebc5dcf0ed8 100644
--- a/arch/mips/vr41xx/common/rtc.c
+++ b/arch/mips/vr41xx/common/rtc.c
@@ -1,7 +1,7 @@
 /*
  *  NEC VR4100 series RTC platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/siu.c b/arch/mips/vr41xx/common/siu.c
index 654dee6208b..54eae56108f 100644
--- a/arch/mips/vr41xx/common/siu.c
+++ b/arch/mips/vr41xx/common/siu.c
@@ -1,7 +1,7 @@
 /*
  *  NEC VR4100 series SIU platform device.
  *
- *  Copyright (C) 2007-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/type.c b/arch/mips/vr41xx/common/type.c
index e0c1ac5e988..ff841422b63 100644
--- a/arch/mips/vr41xx/common/type.c
+++ b/arch/mips/vr41xx/common/type.c
@@ -1,7 +1,7 @@
 /*
  *  type.c, System type for NEC VR4100 series.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/ibm-workpad/setup.c b/arch/mips/vr41xx/ibm-workpad/setup.c
index 9eef297eca1..3982f378a3e 100644
--- a/arch/mips/vr41xx/ibm-workpad/setup.c
+++ b/arch/mips/vr41xx/ibm-workpad/setup.c
@@ -1,7 +1,7 @@
 /*
  *  setup.c, Setup for the IBM WorkPad z50.
  *
- *  Copyright (C) 2002-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
index e58b9a46e1b..19aecc90f7a 100644
--- a/arch/mn10300/include/asm/pci.h
+++ b/arch/mn10300/include/asm/pci.h
@@ -59,7 +59,6 @@ void pcibios_penalize_isa_irq(int irq);
 #include <linux/slab.h>
 #include <asm/scatterlist.h>
 #include <linux/string.h>
-#include <linux/mm.h>
 #include <asm/io.h>
 
 struct pci_dev;
@@ -70,10 +69,6 @@ struct pci_dev;
  */
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
-
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask)	(0)
-
 /* Return the index of the PCI controller for device. */
 static inline int pci_controller_num(struct pci_dev *dev)
 {
diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h
index ec057e1bd4c..a19f11327cd 100644
--- a/arch/mn10300/include/asm/pgalloc.h
+++ b/arch/mn10300/include/asm/pgalloc.h
@@ -51,6 +51,6 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte)
 }
 
 
-#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+#define __pte_free_tlb(tlb, pte, addr) tlb_remove_page((tlb), (pte))
 
 #endif /* _ASM_PGALLOC_H */
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
index 78a3881f3c1..58d64f8b2cc 100644
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -65,8 +65,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 
@@ -76,7 +74,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index fef5b434dad..fad68616af3 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -346,10 +346,12 @@
 #define __NR_inotify_init1	333
 #define __NR_preadv		334
 #define __NR_pwritev		335
+#define __NR_rt_tgsigqueueinfo	336
+#define __NR_perf_counter_open	337
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 326
+#define NR_syscalls 338
 
 /*
  * specify the deprecated syscalls we want to support on this arch
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 7408a27199f..e0d2563af4f 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -722,6 +722,8 @@ ENTRY(sys_call_table)
 	.long sys_inotify_init1
 	.long sys_preadv
 	.long sys_pwritev		/* 335 */
+	.long sys_rt_tgsigqueueinfo
+	.long sys_perf_counter_open
 
 
 nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/ptrace.c b/arch/mn10300/kernel/ptrace.c
index e143339ad28..cf847dabc1b 100644
--- a/arch/mn10300/kernel/ptrace.c
+++ b/arch/mn10300/kernel/ptrace.c
@@ -13,7 +13,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index 9f7572a0f57..feb2f2e810d 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -12,7 +12,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/errno.h>
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index bca5a84dc72..3e52a105432 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -13,7 +13,6 @@
 #include <linux/syscalls.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
@@ -21,7 +20,6 @@
 #include <linux/mman.h>
 #include <linux/file.h>
 #include <linux/utsname.h>
-#include <linux/syscalls.h>
 #include <linux/tty.h>
 
 #include <asm/uaccess.h>
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index 681ad8c9e4f..91365adba4f 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -17,7 +17,6 @@
 #include <linux/timer.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
@@ -136,8 +135,7 @@ void show_trace(unsigned long *sp)
 	unsigned long *stack, addr, module_start, module_end;
 	int i;
 
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "Call Trace:");
+	printk(KERN_EMERG "\nCall Trace:");
 
 	stack = sp;
 	i = 0;
@@ -153,7 +151,7 @@ void show_trace(unsigned long *sp)
 			printk("\n");
 #else
 			if ((i % 6) == 0)
-				printk("\n" KERN_EMERG "  ");
+				printk(KERN_EMERG "  ");
 			printk("[<%08lx>] ", addr);
 			i++;
 #endif
@@ -180,7 +178,7 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 		if (((long) stack & (THREAD_SIZE - 1)) == 0)
 			break;
 		if ((i % 8) == 0)
-			printk("\n" KERN_EMERG "  ");
+			printk(KERN_EMERG "  ");
 		printk("%08lx ", *stack++);
 	}
 
@@ -264,8 +262,7 @@ void show_registers(struct pt_regs *regs)
 		show_stack(current, (unsigned long *) sp);
 
 #if 0
-		printk(KERN_EMERG "\n"
-		       KERN_EMERG "Code: ");
+		printk(KERN_EMERG "\nCode: ");
 		if (regs->pc < PAGE_OFFSET)
 			goto bad;
 
@@ -311,16 +308,14 @@ void die(const char *str, struct pt_regs *regs, enum exception_code code)
 {
 	console_verbose();
 	spin_lock_irq(&die_lock);
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "%s: %04x\n",
+	printk(KERN_EMERG "\n%s: %04x\n",
 	       str, code & 0xffff);
 	show_registers(regs);
 
 	if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 &&
 	    (regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) {
 		printk(KERN_EMERG "Exception in usermode interrupt handler\n");
-		printk(KERN_EMERG "\n"
-		       KERN_EMERG "  Please connect to kernel debugger !!\n");
+		printk(KERN_EMERG "\nPlease connect to kernel debugger !!\n");
 		asm volatile ("0: bra 0b");
 	}
 
@@ -429,9 +424,8 @@ asmlinkage void io_bus_error(u32 bcberr, u32 bcbear, struct pt_regs *regs)
 {
 	console_verbose();
 
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "Asynchronous I/O Bus Error\n"
-	       KERN_EMERG "==========================\n");
+	printk(KERN_EMERG "Asynchronous I/O Bus Error\n");
+	printk(KERN_EMERG "==========================\n");
 
 	if (bcberr & BCBERR_BEME)
 		printk(KERN_EMERG "- Multiple recorded errors\n");
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index bcebcefb4ad..f4aa0793465 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -61,7 +61,7 @@ SECTIONS
 	_edata = .;		/* End of data section */
   }
 
-  .data.init_task : { INIT_TASK(THREAD_SIZE); }
+  .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); }
 
   /* might get freed after init */
   . = ALIGN(PAGE_SIZE);
@@ -107,7 +107,7 @@ SECTIONS
   __init_end = .;
   /* freed after init ends here */
 
-  BSS(4)
+  BSS_SECTION(0, PAGE_SIZE, 4)
 
   _end = . ;
 
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index a62e1e138bc..53bb17d0f06 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -20,7 +20,6 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/vt_kern.h>		/* For unblank_screen() */
diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c
index 94c4a435806..30016251f65 100644
--- a/arch/mn10300/mm/misalignment.c
+++ b/arch/mn10300/mm/misalignment.c
@@ -17,7 +17,6 @@
 #include <linux/timer.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 9038f39d9d7..06f8d5b5b0f 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -16,6 +16,8 @@ config PARISC
 	select RTC_DRV_GENERIC
 	select INIT_ALL_POSSIBLE
 	select BUG
+	select HAVE_PERF_COUNTERS
+	select GENERIC_ATOMIC64 if !64BIT
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
 	  in many of their workstations & servers (HP9000 700 and 800 series,
diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index 7eeaff94436..8bc9e96699b 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -222,13 +222,13 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 
 #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
 
-#define atomic_add(i,v)	((void)(__atomic_add_return( ((int)(i)),(v))))
-#define atomic_sub(i,v)	((void)(__atomic_add_return(-((int)(i)),(v))))
+#define atomic_add(i,v)	((void)(__atomic_add_return( (i),(v))))
+#define atomic_sub(i,v)	((void)(__atomic_add_return(-(i),(v))))
 #define atomic_inc(v)	((void)(__atomic_add_return(   1,(v))))
 #define atomic_dec(v)	((void)(__atomic_add_return(  -1,(v))))
 
-#define atomic_add_return(i,v)	(__atomic_add_return( ((int)(i)),(v)))
-#define atomic_sub_return(i,v)	(__atomic_add_return(-((int)(i)),(v)))
+#define atomic_add_return(i,v)	(__atomic_add_return( (i),(v)))
+#define atomic_sub_return(i,v)	(__atomic_add_return(-(i),(v)))
 #define atomic_inc_return(v)	(__atomic_add_return(   1,(v)))
 #define atomic_dec_return(v)	(__atomic_add_return(  -1,(v)))
 
@@ -336,7 +336,11 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
 
-#endif /* CONFIG_64BIT */
+#else /* CONFIG_64BIT */
+
+#include <asm-generic/atomic64.h>
+
+#endif /* !CONFIG_64BIT */
 
 #include <asm-generic/atomic-long.h>
 
diff --git a/arch/parisc/include/asm/dma.h b/arch/parisc/include/asm/dma.h
index 31ad0f05af3..f7a18f96870 100644
--- a/arch/parisc/include/asm/dma.h
+++ b/arch/parisc/include/asm/dma.h
@@ -1,5 +1,4 @@
-/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+/* asm/dma.h: Defines for using and allocating dma channels.
  * Written by Hennus Bergman, 1992.
  * High DMA channel support & info by Hannu Savolainen
  * and John Boyd, Nov. 1992.
diff --git a/arch/parisc/include/asm/perf_counter.h b/arch/parisc/include/asm/perf_counter.h
new file mode 100644
index 00000000000..dc9e829f701
--- /dev/null
+++ b/arch/parisc/include/asm/perf_counter.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_PARISC_PERF_COUNTER_H
+#define __ASM_PARISC_PERF_COUNTER_H
+
+/* parisc only supports software counters through this interface. */
+static inline void set_perf_counter_pending(void) { }
+
+#endif /* __ASM_PARISC_PERF_COUNTER_H */
diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
index 9d64df8754b..9ce66e9d1c2 100644
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -18,6 +18,7 @@
 #include <asm/types.h>
 #include <asm/system.h>
 #include <asm/percpu.h>
+
 #endif /* __ASSEMBLY__ */
 
 #define KERNEL_STACK_SIZE 	(4*PAGE_SIZE)
@@ -127,6 +128,8 @@ struct thread_struct {
 	unsigned long  flags;
 }; 
 
+#define task_pt_regs(tsk) ((struct pt_regs *)&((tsk)->thread.regs))
+
 /* Thread struct flags. */
 #define PARISC_UAC_NOPRINT	(1UL << 0)	/* see prctl and unaligned.c */
 #define PARISC_UAC_SIGBUS	(1UL << 1)
diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h
index ee80c920b46..d91357bca5b 100644
--- a/arch/parisc/include/asm/system.h
+++ b/arch/parisc/include/asm/system.h
@@ -168,8 +168,8 @@ static inline void set_eiem(unsigned long val)
 /* LDCW, the only atomic read-write operation PA-RISC has. *sigh*.  */
 #define __ldcw(a) ({						\
 	unsigned __ret;						\
-	__asm__ __volatile__(__LDCW " 0(%1),%0"			\
-		: "=r" (__ret) : "r" (a));			\
+	__asm__ __volatile__(__LDCW " 0(%2),%0"			\
+		: "=r" (__ret), "+m" (*(a)) : "r" (a));		\
 	__ret;							\
 })
 
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 0407959da48..4ce0edfbe96 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -23,7 +23,7 @@ struct thread_info {
 	.flags		= 0,			\
 	.cpu		= 0,			\
 	.addr_limit	= KERNEL_DS,		\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
   	.restart_block	= {			\
 		.fn = do_no_restart_syscall	\
 	}					\
diff --git a/arch/parisc/include/asm/tlb.h b/arch/parisc/include/asm/tlb.h
index 383b1db310e..07924903989 100644
--- a/arch/parisc/include/asm/tlb.h
+++ b/arch/parisc/include/asm/tlb.h
@@ -21,7 +21,7 @@ do {	if (!(tlb)->fullmm)	\
 
 #include <asm-generic/tlb.h>
 
-#define __pmd_free_tlb(tlb, pmd)	pmd_free((tlb)->mm, pmd)
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, addr)	pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, addr)	pte_free((tlb)->mm, pte)
 
 #endif
diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h
index 1f6fd4fc05b..8f1a8100bf2 100644
--- a/arch/parisc/include/asm/tlbflush.h
+++ b/arch/parisc/include/asm/tlbflush.h
@@ -12,14 +12,12 @@
  * N class systems, only one PxTLB inter processor broadcast can be
  * active at any one time on the Merced bus.  This tlb purge
  * synchronisation is fairly lightweight and harmless so we activate
- * it on all SMP systems not just the N class.  We also need to have
- * preemption disabled on uniprocessor machines, and spin_lock does that
- * nicely.
+ * it on all systems not just the N class.
  */
 extern spinlock_t pa_tlb_lock;
 
-#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
-#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
+#define purge_tlb_start(flags)	spin_lock_irqsave(&pa_tlb_lock, flags)
+#define purge_tlb_end(flags)	spin_unlock_irqrestore(&pa_tlb_lock, flags)
 
 extern void flush_tlb_all(void);
 extern void flush_tlb_all_local(void *);
@@ -63,14 +61,16 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
 static inline void flush_tlb_page(struct vm_area_struct *vma,
 	unsigned long addr)
 {
+	unsigned long flags;
+
 	/* For one page, it's not worth testing the split_tlb variable */
 
 	mb();
 	mtsp(vma->vm_mm->context,1);
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	pdtlb(addr);
 	pitlb(addr);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 }
 
 void __flush_tlb_range(unsigned long sid,
diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h
index ef26b009dc5..f3d3b8b012c 100644
--- a/arch/parisc/include/asm/unistd.h
+++ b/arch/parisc/include/asm/unistd.h
@@ -807,8 +807,12 @@
 #define __NR_dup3		(__NR_Linux + 312)
 #define __NR_pipe2		(__NR_Linux + 313)
 #define __NR_inotify_init1	(__NR_Linux + 314)
+#define __NR_preadv		(__NR_Linux + 315)
+#define __NR_pwritev		(__NR_Linux + 316)
+#define __NR_rt_tgsigqueueinfo	(__NR_Linux + 317)
+#define __NR_perf_counter_open	(__NR_Linux + 318)
 
-#define __NR_Linux_syscalls	(__NR_inotify_init1 + 1)
+#define __NR_Linux_syscalls	(__NR_perf_counter_open + 1)
 
 
 #define __IGNORE_select		/* newselect */
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 837530ea32e..b6ed34de14e 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -1,5 +1,4 @@
-/* $Id: cache.c,v 1.4 2000/01/25 00:11:38 prumpf Exp $
- *
+/*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -398,12 +397,13 @@ EXPORT_SYMBOL(flush_kernel_icache_range_asm);
 
 void clear_user_page_asm(void *page, unsigned long vaddr)
 {
+	unsigned long flags;
 	/* This function is implemented in assembly in pacache.S */
 	extern void __clear_user_page_asm(void *page, unsigned long vaddr);
 
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	__clear_user_page_asm(page, vaddr);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 }
 
 #define FLUSH_THRESHOLD 0x80000 /* 0.5MB */
@@ -444,20 +444,24 @@ extern void clear_user_page_asm(void *page, unsigned long vaddr);
 
 void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
 {
+	unsigned long flags;
+
 	purge_kernel_dcache_page((unsigned long)page);
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	pdtlb_kernel(page);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 	clear_user_page_asm(page, vaddr);
 }
 EXPORT_SYMBOL(clear_user_page);
 
 void flush_kernel_dcache_page_addr(void *addr)
 {
+	unsigned long flags;
+
 	flush_kernel_dcache_page_asm(addr);
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	pdtlb_kernel(addr);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 }
 EXPORT_SYMBOL(flush_kernel_dcache_page_addr);
 
@@ -490,8 +494,10 @@ void __flush_tlb_range(unsigned long sid, unsigned long start,
 	if (npages >= 512)  /* 2MB of space: arbitrary, should be tuned */
 		flush_tlb_all();
 	else {
+		unsigned long flags;
+
 		mtsp(sid, 1);
-		purge_tlb_start();
+		purge_tlb_start(flags);
 		if (split_tlb) {
 			while (npages--) {
 				pdtlb(start);
@@ -504,7 +510,7 @@ void __flush_tlb_range(unsigned long sid, unsigned long start,
 				start += PAGE_SIZE;
 			}
 		}
-		purge_tlb_end();
+		purge_tlb_end(flags);
 	}
 }
 
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index ae3e70cd1e1..e552e547cb9 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -553,7 +553,7 @@
 	 * on most of those machines only handles cache transactions.
 	 */
 	extrd,u,*=	\pte,_PAGE_NO_CACHE_BIT+32,1,%r0
-	depi		1,12,1,\prot
+	depdi		1,12,1,\prot
 
 	/* Drop prot bits and convert to page addr for iitlbt and idtlbt */
 	convert_for_tlb_insert20 \pte
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index bd1f7f1ff74..d228d823787 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -170,23 +170,27 @@ static void __init pagezero_memconfig(void)
 static int __init 
 pat_query_module(ulong pcell_loc, ulong mod_index)
 {
-	pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
+	pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
 	unsigned long bytecnt;
 	unsigned long temp;	/* 64-bit scratch value */
 	long status;		/* PDC return value status */
 	struct parisc_device *dev;
 
+	pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
+	if (!pa_pdc_cell)
+		panic("couldn't allocate memory for PDC_PAT_CELL!");
+
 	/* return cell module (PA or Processor view) */
 	status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
-				     PA_VIEW, &pa_pdc_cell);
+				     PA_VIEW, pa_pdc_cell);
 
 	if (status != PDC_OK) {
 		/* no more cell modules or error */
 		return status;
 	}
 
-	temp = pa_pdc_cell.cba;
-	dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path);
+	temp = pa_pdc_cell->cba;
+	dev = alloc_pa_dev(PAT_GET_CBA(temp), &(pa_pdc_cell->mod_path));
 	if (!dev) {
 		return PDC_OK;
 	}
@@ -203,8 +207,8 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
 
 	/* save generic info returned from the call */
 	/* REVISIT: who is the consumer of this? not sure yet... */
-	dev->mod_info = pa_pdc_cell.mod_info;	/* pass to PAT_GET_ENTITY() */
-	dev->pmod_loc = pa_pdc_cell.mod_location;
+	dev->mod_info = pa_pdc_cell->mod_info;	/* pass to PAT_GET_ENTITY() */
+	dev->pmod_loc = pa_pdc_cell->mod_location;
 
 	register_parisc_device(dev);	/* advertise device */
 
@@ -216,14 +220,14 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
 
 	case PAT_ENTITY_PROC:
 		printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n",
-			pa_pdc_cell.mod[0]);
+			pa_pdc_cell->mod[0]);
 		break;
 
 	case PAT_ENTITY_MEM:
 		printk(KERN_DEBUG 
 			"PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n",
-			pa_pdc_cell.mod[0], pa_pdc_cell.mod[1], 
-			pa_pdc_cell.mod[2]);
+			pa_pdc_cell->mod[0], pa_pdc_cell->mod[1],
+			pa_pdc_cell->mod[2]);
 		break;
 	case PAT_ENTITY_CA:
 		printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc);
@@ -243,23 +247,26 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
  print_ranges:
 		pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
 				    IO_VIEW, &io_pdc_cell);
-		printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]);
-		for (i = 0; i < pa_pdc_cell.mod[1]; i++) {
+		printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell->mod[1]);
+		for (i = 0; i < pa_pdc_cell->mod[1]; i++) {
 			printk(KERN_DEBUG 
 				"  PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", 
-				i, pa_pdc_cell.mod[2 + i * 3],	/* type */
-				pa_pdc_cell.mod[3 + i * 3],	/* start */
-				pa_pdc_cell.mod[4 + i * 3]);	/* finish (ie end) */
+				i, pa_pdc_cell->mod[2 + i * 3],	/* type */
+				pa_pdc_cell->mod[3 + i * 3],	/* start */
+				pa_pdc_cell->mod[4 + i * 3]);	/* finish (ie end) */
 			printk(KERN_DEBUG 
 				"  IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", 
-				i, io_pdc_cell.mod[2 + i * 3],	/* type */
-				io_pdc_cell.mod[3 + i * 3],	/* start */
-				io_pdc_cell.mod[4 + i * 3]);	/* finish (ie end) */
+				i, io_pdc_cell->mod[2 + i * 3],	/* type */
+				io_pdc_cell->mod[3 + i * 3],	/* start */
+				io_pdc_cell->mod[4 + i * 3]);	/* finish (ie end) */
 		}
 		printk(KERN_DEBUG "\n");
 		break;
 	}
 #endif /* DEBUG_PAT */
+
+	kfree(pa_pdc_cell);
+
 	return PDC_OK;
 }
 
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 8007f1e6572..330f536a932 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest)
 	if (CHECK_IRQ_PER_CPU(irq)) {
 		/* Bad linux design decision.  The mask has already
 		 * been set; we must reset it */
-		cpumask_setall(&irq_desc[irq].affinity);
+		cpumask_setall(irq_desc[irq].affinity);
 		return -EINVAL;
 	}
 
@@ -138,13 +138,13 @@ static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
 	if (cpu_dest < 0)
 		return -1;
 
-	cpumask_copy(&irq_desc[irq].affinity, dest);
+	cpumask_copy(irq_desc[irq].affinity, dest);
 
 	return 0;
 }
 #endif
 
-static struct hw_interrupt_type cpu_interrupt_type = {
+static struct irq_chip cpu_interrupt_type = {
 	.typename	= "CPU",
 	.startup	= cpu_startup_irq,
 	.shutdown	= cpu_disable_irq,
@@ -299,7 +299,7 @@ int txn_alloc_irq(unsigned int bits_wide)
 unsigned long txn_affinity_addr(unsigned int irq, int cpu)
 {
 #ifdef CONFIG_SMP
-	cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu));
+	cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
 #endif
 
 	return per_cpu(cpu_data, cpu).txn_addr;
@@ -356,7 +356,7 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 	irq = eirr_to_irq(eirr_val);
 
 #ifdef CONFIG_SMP
-	cpumask_copy(&dest, &irq_desc[irq].affinity);
+	cpumask_copy(&dest, irq_desc[irq].affinity);
 	if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) &&
 	    !cpu_isset(smp_processor_id(), dest)) {
 		int cpu = first_cpu(dest);
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index ef5caf2e6ed..61ee0eec4e6 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -86,8 +86,12 @@
  * the bottom of the table, which has a maximum signed displacement of
  * 0x3fff; however, since we're only going forward, this becomes
  * 0x1fff, and thus, since each GOT entry is 8 bytes long we can have
- * at most 1023 entries */
-#define MAX_GOTS	1023
+ * at most 1023 entries.
+ * To overcome this 14bit displacement with some kernel modules, we'll
+ * use instead the unusal 16bit displacement method (see reassemble_16a)
+ * which gives us a maximum positive displacement of 0x7fff, and as such
+ * allows us to allocate up to 4095 GOT entries. */
+#define MAX_GOTS	4095
 
 /* three functions to determine where in the module core
  * or init pieces the location is */
@@ -145,12 +149,40 @@ struct stub_entry {
 /* The reassemble_* functions prepare an immediate value for
    insertion into an opcode. pa-risc uses all sorts of weird bitfields
    in the instruction to hold the value.  */
+static inline int sign_unext(int x, int len)
+{
+	int len_ones;
+
+	len_ones = (1 << len) - 1;
+	return x & len_ones;
+}
+
+static inline int low_sign_unext(int x, int len)
+{
+	int sign, temp;
+
+	sign = (x >> (len-1)) & 1;
+	temp = sign_unext(x, len-1);
+	return (temp << 1) | sign;
+}
+
 static inline int reassemble_14(int as14)
 {
 	return (((as14 & 0x1fff) << 1) |
 		((as14 & 0x2000) >> 13));
 }
 
+static inline int reassemble_16a(int as16)
+{
+	int s, t;
+
+	/* Unusual 16-bit encoding, for wide mode only.  */
+	t = (as16 << 1) & 0xffff;
+	s = (as16 & 0x8000);
+	return (t ^ s ^ (s >> 1)) | (s >> 15);
+}
+
+
 static inline int reassemble_17(int as17)
 {
 	return (((as17 & 0x10000) >> 16) |
@@ -407,6 +439,7 @@ static Elf_Addr get_stub(struct module *me, unsigned long value, long addend,
 	enum elf_stub_type stub_type, Elf_Addr loc0, unsigned int targetsec)
 {
 	struct stub_entry *stub;
+	int __maybe_unused d;
 
 	/* initialize stub_offset to point in front of the section */
 	if (!me->arch.section[targetsec].stub_offset) {
@@ -460,12 +493,19 @@ static Elf_Addr get_stub(struct module *me, unsigned long value, long addend,
  */
 	switch (stub_type) {
 	case ELF_STUB_GOT:
-		stub->insns[0] = 0x537b0000;	/* ldd 0(%dp),%dp	*/
+		d = get_got(me, value, addend);
+		if (d <= 15) {
+			/* Format 5 */
+			stub->insns[0] = 0x0f6010db; /* ldd 0(%dp),%dp	*/
+			stub->insns[0] |= low_sign_unext(d, 5) << 16;
+		} else {
+			/* Format 3 */
+			stub->insns[0] = 0x537b0000; /* ldd 0(%dp),%dp	*/
+			stub->insns[0] |= reassemble_16a(d);
+		}
 		stub->insns[1] = 0x53610020;	/* ldd 10(%dp),%r1	*/
 		stub->insns[2] = 0xe820d000;	/* bve (%r1)		*/
 		stub->insns[3] = 0x537b0030;	/* ldd 18(%dp),%dp	*/
-
-		stub->insns[0] |= reassemble_14(get_got(me, value, addend) & 0x3fff);
 		break;
 	case ELF_STUB_MILLI:
 		stub->insns[0] = 0x20200000;	/* ldil 0,%r1		*/
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 7d927eac932..c07f618ff7d 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -90,12 +90,14 @@ static inline int map_pte_uncached(pte_t * pte,
 	if (end > PMD_SIZE)
 		end = PMD_SIZE;
 	do {
+		unsigned long flags;
+
 		if (!pte_none(*pte))
 			printk(KERN_ERR "map_pte_uncached: page already exists\n");
 		set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC));
-		purge_tlb_start();
+		purge_tlb_start(flags);
 		pdtlb_kernel(orig_vaddr);
-		purge_tlb_end();
+		purge_tlb_end(flags);
 		vaddr += PAGE_SIZE;
 		orig_vaddr += PAGE_SIZE;
 		(*paddr_ptr) += PAGE_SIZE;
@@ -168,11 +170,13 @@ static inline void unmap_uncached_pte(pmd_t * pmd, unsigned long vaddr,
 	if (end > PMD_SIZE)
 		end = PMD_SIZE;
 	do {
+		unsigned long flags;
 		pte_t page = *pte;
+
 		pte_clear(&init_mm, vaddr, pte);
-		purge_tlb_start();
+		purge_tlb_start(flags);
 		pdtlb_kernel(orig_vaddr);
-		purge_tlb_end();
+		purge_tlb_end(flags);
 		vaddr += PAGE_SIZE;
 		orig_vaddr += PAGE_SIZE;
 		pte++;
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 6936386c986..f7064abc3bb 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -1,5 +1,4 @@
-/* $Id: pci.c,v 1.6 2000/01/29 00:12:05 grundler Exp $
- *
+/*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 61c07078c07..1f3aa8db020 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -156,7 +156,7 @@ void machine_power_off(void)
 	 * software. The user has to press the button himself. */
 
 	printk(KERN_EMERG "System shut down completed.\n"
-	       KERN_EMERG "Please power this system off now.");
+	       "Please power this system off now.");
 }
 
 void (*pm_power_off)(void) = machine_power_off;
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index e09d0f7fb6b..c8fb61ed32f 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -1,5 +1,4 @@
-/*    $Id: processor.c,v 1.1 2002/07/20 16:27:06 rhirst Exp $
- *
+/*
  *    Initial setup-routines for HP 9000 based hardware.
  *
  *    Copyright (C) 1991, 1992, 1995  Linus Torvalds
@@ -121,22 +120,28 @@ static int __cpuinit processor_probe(struct parisc_device *dev)
 	if (is_pdc_pat()) {
 		ulong status;
 		unsigned long bytecnt;
-	        pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
+	        pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
 #undef USE_PAT_CPUID
 #ifdef USE_PAT_CPUID
 		struct pdc_pat_cpu_num cpu_info;
 #endif
 
+		pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
+		if (!pa_pdc_cell)
+			panic("couldn't allocate memory for PDC_PAT_CELL!");
+
 		status = pdc_pat_cell_module(&bytecnt, dev->pcell_loc,
-			dev->mod_index, PA_VIEW, &pa_pdc_cell);
+			dev->mod_index, PA_VIEW, pa_pdc_cell);
 
 		BUG_ON(PDC_OK != status);
 
 		/* verify it's the same as what do_pat_inventory() found */
-		BUG_ON(dev->mod_info != pa_pdc_cell.mod_info);
-		BUG_ON(dev->pmod_loc != pa_pdc_cell.mod_location);
+		BUG_ON(dev->mod_info != pa_pdc_cell->mod_info);
+		BUG_ON(dev->pmod_loc != pa_pdc_cell->mod_location);
+
+		txn_addr = pa_pdc_cell->mod[0];   /* id_eid for IO sapic */
 
-		txn_addr = pa_pdc_cell.mod[0];   /* id_eid for IO sapic */
+		kfree(pa_pdc_cell);
 
 #ifdef USE_PAT_CPUID
 /* We need contiguous numbers for cpuid. Firmware's notion
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 82131ca8e05..cb71f3dac99 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -1,5 +1,4 @@
-/*    $Id: setup.c,v 1.8 2000/02/02 04:42:38 prumpf Exp $
- *
+/*
  *    Initial setup-routines for HP 9000 based hardware.
  *
  *    Copyright (C) 1991, 1992, 1995  Linus Torvalds
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 1adb40c8166..92a0acaa0d1 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -174,68 +174,6 @@ asmlinkage long sys32_sched_rr_get_interval(pid_t pid,
 	return ret;
 }
 
-/*** copied from mips64 ***/
-/*
- * Ooo, nasty.  We need here to frob 32-bit unsigned longs to
- * 64-bit unsigned longs.
- */
-
-static inline int
-get_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
-{
-	n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
-	if (ufdset) {
-		unsigned long odd;
-
-		if (!access_ok(VERIFY_WRITE, ufdset, n*sizeof(u32)))
-			return -EFAULT;
-
-		odd = n & 1UL;
-		n &= ~1UL;
-		while (n) {
-			unsigned long h, l;
-			__get_user(l, ufdset);
-			__get_user(h, ufdset+1);
-			ufdset += 2;
-			*fdset++ = h << 32 | l;
-			n -= 2;
-		}
-		if (odd)
-			__get_user(*fdset, ufdset);
-	} else {
-		/* Tricky, must clear full unsigned long in the
-		 * kernel fdset at the end, this makes sure that
-		 * actually happens.
-		 */
-		memset(fdset, 0, ((n + 1) & ~1)*sizeof(u32));
-	}
-	return 0;
-}
-
-static inline void
-set_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
-{
-	unsigned long odd;
-	n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
-
-	if (!ufdset)
-		return;
-
-	odd = n & 1UL;
-	n &= ~1UL;
-	while (n) {
-		unsigned long h, l;
-		l = *fdset++;
-		h = l >> 32;
-		__put_user(l, ufdset);
-		__put_user(h, ufdset+1);
-		ufdset += 2;
-		n -= 2;
-	}
-	if (odd)
-		__put_user(*fdset, ufdset);
-}
-
 struct msgbuf32 {
     int mtype;
     char mtext[1];
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 03b9a01bc16..cf145eb026b 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -413,6 +413,10 @@
 	ENTRY_SAME(dup3)
 	ENTRY_SAME(pipe2)
 	ENTRY_SAME(inotify_init1)
+	ENTRY_COMP(preadv)		/* 315 */
+	ENTRY_COMP(pwritev)
+	ENTRY_COMP(rt_tgsigqueueinfo)
+	ENTRY_SAME(perf_counter_open)
 
 	/* Nothing yet */
 
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index d4dd05674c6..a79c6f9e7e2 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -56,9 +56,9 @@ static unsigned long clocktick __read_mostly;	/* timer cycles per tick */
  */
 irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
 {
-	unsigned long now;
+	unsigned long now, now2;
 	unsigned long next_tick;
-	unsigned long cycles_elapsed, ticks_elapsed;
+	unsigned long cycles_elapsed, ticks_elapsed = 1;
 	unsigned long cycles_remainder;
 	unsigned int cpu = smp_processor_id();
 	struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu);
@@ -71,44 +71,24 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
 	/* Initialize next_tick to the expected tick time. */
 	next_tick = cpuinfo->it_value;
 
-	/* Get current interval timer.
-	 * CR16 reads as 64 bits in CPU wide mode.
-	 * CR16 reads as 32 bits in CPU narrow mode.
-	 */
+	/* Get current cycle counter (Control Register 16). */
 	now = mfctl(16);
 
 	cycles_elapsed = now - next_tick;
 
-	if ((cycles_elapsed >> 5) < cpt) {
+	if ((cycles_elapsed >> 6) < cpt) {
 		/* use "cheap" math (add/subtract) instead
 		 * of the more expensive div/mul method
 		 */
 		cycles_remainder = cycles_elapsed;
-		ticks_elapsed = 1;
 		while (cycles_remainder > cpt) {
 			cycles_remainder -= cpt;
 			ticks_elapsed++;
 		}
 	} else {
+		/* TODO: Reduce this to one fdiv op */
 		cycles_remainder = cycles_elapsed % cpt;
-		ticks_elapsed = 1 + cycles_elapsed / cpt;
-	}
-
-	/* Can we differentiate between "early CR16" (aka Scenario 1) and
-	 * "long delay" (aka Scenario 3)? I don't think so.
-	 *
-	 * We expected timer_interrupt to be delivered at least a few hundred
-	 * cycles after the IT fires. But it's arbitrary how much time passes
-	 * before we call it "late". I've picked one second.
-	 */
-	if (unlikely(ticks_elapsed > HZ)) {
-		/* Scenario 3: very long delay?  bad in any case */
-		printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
-			" cycles %lX rem %lX "
-			" next/now %lX/%lX\n",
-			cpu,
-			cycles_elapsed, cycles_remainder,
-			next_tick, now );
+		ticks_elapsed += cycles_elapsed / cpt;
 	}
 
 	/* convert from "division remainder" to "remainder of clock tick" */
@@ -122,18 +102,56 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
 
 	cpuinfo->it_value = next_tick;
 
-	/* Skip one clocktick on purpose if we are likely to miss next_tick.
-	 * We want to avoid the new next_tick being less than CR16.
-	 * If that happened, itimer wouldn't fire until CR16 wrapped.
-	 * We'll catch the tick we missed on the tick after that.
+	/* Program the IT when to deliver the next interrupt.
+	 * Only bottom 32-bits of next_tick are writable in CR16!
 	 */
-	if (!(cycles_remainder >> 13))
-		next_tick += cpt;
-
-	/* Program the IT when to deliver the next interrupt. */
-	/* Only bottom 32-bits of next_tick are written to cr16.  */
 	mtctl(next_tick, 16);
 
+	/* Skip one clocktick on purpose if we missed next_tick.
+	 * The new CR16 must be "later" than current CR16 otherwise
+	 * itimer would not fire until CR16 wrapped - e.g 4 seconds
+	 * later on a 1Ghz processor. We'll account for the missed
+	 * tick on the next timer interrupt.
+	 *
+	 * "next_tick - now" will always give the difference regardless
+	 * if one or the other wrapped. If "now" is "bigger" we'll end up
+	 * with a very large unsigned number.
+	 */
+	now2 = mfctl(16);
+	if (next_tick - now2 > cpt)
+		mtctl(next_tick+cpt, 16);
+
+#if 1
+/*
+ * GGG: DEBUG code for how many cycles programming CR16 used.
+ */
+	if (unlikely(now2 - now > 0x3000)) 	/* 12K cycles */
+		printk (KERN_CRIT "timer_interrupt(CPU %d): SLOW! 0x%lx cycles!"
+			" cyc %lX rem %lX "
+			" next/now %lX/%lX\n",
+			cpu, now2 - now, cycles_elapsed, cycles_remainder,
+			next_tick, now );
+#endif
+
+	/* Can we differentiate between "early CR16" (aka Scenario 1) and
+	 * "long delay" (aka Scenario 3)? I don't think so.
+	 *
+	 * Timer_interrupt will be delivered at least a few hundred cycles
+	 * after the IT fires. But it's arbitrary how much time passes
+	 * before we call it "late". I've picked one second.
+	 *
+	 * It's important NO printk's are between reading CR16 and
+	 * setting up the next value. May introduce huge variance.
+	 */
+	if (unlikely(ticks_elapsed > HZ)) {
+		/* Scenario 3: very long delay?  bad in any case */
+		printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
+			" cycles %lX rem %lX "
+			" next/now %lX/%lX\n",
+			cpu,
+			cycles_elapsed, cycles_remainder,
+			next_tick, now );
+	}
 
 	/* Done mucking with unreliable delivery of interrupts.
 	 * Go do system house keeping.
@@ -173,7 +191,7 @@ EXPORT_SYMBOL(profile_pc);
 
 /* clock source code */
 
-static cycle_t read_cr16(void)
+static cycle_t read_cr16(struct clocksource *cs)
 {
 	return get_cycles();
 }
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index c32f5d6d778..8b58bf0b7d5 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -250,15 +250,14 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err)
 	oops_enter();
 
 	/* Amuse the user in a SPARC fashion */
-	if (err) printk(
-KERN_CRIT "      _______________________________ \n"
-KERN_CRIT "     < Your System ate a SPARC! Gah! >\n"
-KERN_CRIT "      ------------------------------- \n"
-KERN_CRIT "             \\   ^__^\n"
-KERN_CRIT "              \\  (xx)\\_______\n"
-KERN_CRIT "                 (__)\\       )\\/\\\n"
-KERN_CRIT "                  U  ||----w |\n"
-KERN_CRIT "                     ||     ||\n");
+	if (err) printk(KERN_CRIT
+			"      _______________________________ \n"
+			"     < Your System ate a SPARC! Gah! >\n"
+			"      ------------------------------- \n"
+			"             \\   ^__^\n"
+			"                 (__)\\       )\\/\\\n"
+			"                  U  ||----w |\n"
+			"                     ||     ||\n");
 	
 	/* unlock the pdc lock if necessary */
 	pdc_emergency_unlock();
@@ -533,7 +532,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 	  	/* Kill the user process later */
 	  	regs->iaoq[0] = 0 | 3;
 		regs->iaoq[1] = regs->iaoq[0] + 4;
-	 	regs->iasq[0] = regs->iasq[0] = regs->sr[7];
+	 	regs->iasq[0] = regs->iasq[1] = regs->sr[7];
 		regs->gr[0] &= ~PSW_B;
 		return;
 	}
@@ -797,7 +796,8 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 		else
 			printk(KERN_DEBUG "User Fault (long pointer) (fault %d) ",
 			       code);
-		printk("pid=%d command='%s'\n", task_pid_nr(current), current->comm);
+		printk(KERN_CONT "pid=%d command='%s'\n",
+		       task_pid_nr(current), current->comm);
 		show_regs(regs);
 #endif
 		si.si_signo = SIGSEGV;
diff --git a/arch/parisc/lib/checksum.c b/arch/parisc/lib/checksum.c
index 462696d30d3..ae66d31f9ec 100644
--- a/arch/parisc/lib/checksum.c
+++ b/arch/parisc/lib/checksum.c
@@ -13,8 +13,6 @@
  *		modify it under the terms of the GNU General Public License
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
- *
- * $Id: checksum.c,v 1.3 1997/12/01 17:57:34 ralf Exp $
  */
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index bbda909c866..abf41f4632a 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -405,7 +405,7 @@ byte_copy:
 
 unaligned_copy:
 	/* possibly we are aligned on a word, but not on a double... */
-	if (likely(t1 & (sizeof(unsigned int)-1)) == 0) {
+	if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) {
 		t2 = src & (sizeof(unsigned int) - 1);
 
 		if (unlikely(t2 != 0)) {
diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c
index 66c8a9f6a27..3ca1c614921 100644
--- a/arch/parisc/math-emu/decode_exc.c
+++ b/arch/parisc/math-emu/decode_exc.c
@@ -40,7 +40,7 @@
  * END_DESC
 */
 
-
+#include <linux/kernel.h>
 #include "float.h"
 #include "sgl_float.h"
 #include "dbl_float.h"
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index bfb6dd6ab38..c6afbfc9577 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -1,5 +1,4 @@
-/* $Id: fault.c,v 1.5 2000/01/26 16:20:29 jsm Exp $
- *
+/*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 4356ceb1e36..b0831d9e35c 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -370,34 +370,22 @@ static void __init setup_bootmem(void)
 
 void free_initmem(void)
 {
-	unsigned long addr, init_begin, init_end;
-
-	printk(KERN_INFO "Freeing unused kernel memory: ");
+	unsigned long addr;
+	unsigned long init_begin = (unsigned long)__init_begin;
+	unsigned long init_end = (unsigned long)__init_end;
 
 #ifdef CONFIG_DEBUG_KERNEL
 	/* Attempt to catch anyone trying to execute code here
 	 * by filling the page with BRK insns.
-	 * 
-	 * If we disable interrupts for all CPUs, then IPI stops working.
-	 * Kinda breaks the global cache flushing.
 	 */
-	local_irq_disable();
-
-	memset(__init_begin, 0x00,
-		(unsigned long)__init_end - (unsigned long)__init_begin);
-
-	flush_data_cache();
-	asm volatile("sync" : : );
-	flush_icache_range((unsigned long)__init_begin, (unsigned long)__init_end);
-	asm volatile("sync" : : );
-
-	local_irq_enable();
+	memset((void *)init_begin, 0x00, init_end - init_begin);
+	flush_icache_range(init_begin, init_end);
 #endif
 	
 	/* align __init_begin and __init_end to page size,
 	   ignoring linker script where we might have tried to save RAM */
-	init_begin = PAGE_ALIGN((unsigned long)(__init_begin));
-	init_end   = PAGE_ALIGN((unsigned long)(__init_end));
+	init_begin = PAGE_ALIGN(init_begin);
+	init_end = PAGE_ALIGN(init_end);
 	for (addr = init_begin; addr < init_end; addr += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
@@ -409,7 +397,8 @@ void free_initmem(void)
 	/* set up a new led state on systems shipped LED State panel */
 	pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
 	
-	printk("%luk freed\n", (init_end - init_begin) >> 10);
+	printk(KERN_INFO "Freeing unused kernel memory: %luk freed\n",
+		(init_end - init_begin) >> 10);
 }
 
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index bf6cedfa05d..d00131ca083 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -62,7 +62,6 @@ config HAVE_LATENCYTOP_SUPPORT
 
 config TRACE_IRQFLAGS_SUPPORT
 	bool
-	depends on PPC64
 	default y
 
 config LOCKDEP_SUPPORT
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 2f50acd11a6..3d80c3e9cf6 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -36,3 +36,13 @@ zImage.pseries
 zconf.h
 zlib.h
 zutil.h
+fdt.c
+fdt.h
+fdt_ro.c
+fdt_rw.c
+fdt_strerror.c
+fdt_sw.c
+fdt_wip.c
+libfdt.h
+libfdt_internal.h
+
diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts
index 26549fca2ed..49ac36b16dd 100644
--- a/arch/powerpc/boot/dts/amigaone.dts
+++ b/arch/powerpc/boot/dts/amigaone.dts
@@ -70,8 +70,8 @@
 			devsel-speed = <0x00000001>;
 			min-grant = <0>;
 			max-latency = <0>;
-			/* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
-			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>;
+			/* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
+			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
 			interrupt-parent = <&i8259>;
 			#interrupt-cells = <2>;
 			#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 224b4f0704b..4f06dbc0d27 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -410,7 +410,7 @@
 		bus-range = <0 0>;
 		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
 		sleep = <&pmc 0x00010000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 474ea2fa3f8..aabf3437cad 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -394,7 +394,7 @@
 		bus-range = <0 0>;
 		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
 		sleep = <&pmc 0x00010000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index d4838af8d37..9b1da864d89 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -424,7 +424,7 @@
 		bus-range = <0x0 0x0>;
 		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
 		sleep = <&pmc 0x00010000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index a8dcb018c4a..9e4ce99e161 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -253,6 +253,7 @@
 			/* Filled in by U-Boot */
 			clock-frequency = <0>;
 			status = "disabled";
+			sdhci,1-bit-only;
 		};
 
 		crypto@30000 {
@@ -500,6 +501,10 @@
 				reg = <0x6>;
 				device_type = "ethernet-phy";
 			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 		mdio@3520 {
 			#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index 01bfb56bbe8..31605ee4afb 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -261,10 +261,11 @@
 				compatible = "gpio-leds";
 				green {
 					gpios = <&GPIO1 0 0>;
-					default-state = "on";
+					default-state = "keep";
 				};
 				red {
 					gpios = <&GPIO1 1 0>;
+					default-state = "keep";
 				};
 			};
 
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 3b77f092abe..787635f23d8 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 07:57:16 2009
+# Linux kernel version: 2.6.30
+# Tue Jun  9 23:35:36 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -41,6 +41,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -53,10 +54,12 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -74,7 +77,17 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
@@ -82,27 +95,29 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -110,10 +125,13 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -121,6 +139,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -133,7 +152,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -149,11 +167,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -173,10 +186,11 @@ CONFIG_WARP=y
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 # CONFIG_PPC44x_SIMPLE is not set
-# CONFIG_PPC4xx_GPIO is not set
+CONFIG_PPC4xx_GPIO=y
 CONFIG_440EP=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
@@ -235,9 +249,13 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -256,6 +274,7 @@ CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -271,14 +290,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +370,7 @@ CONFIG_VLAN_8021Q=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,7 +383,6 @@ CONFIG_VLAN_8021Q=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -378,8 +395,12 @@ CONFIG_VLAN_8021Q=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -471,13 +492,21 @@ CONFIG_MTD_NAND_NDFC=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -495,10 +524,17 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_XILINX_SYSACE is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -529,7 +565,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SCSI_WAIT_SCAN is not set
 
 #
 # SCSI Transports
@@ -541,10 +577,12 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -554,6 +592,8 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 CONFIG_IBM_NEW_EMAC=y
 CONFIG_IBM_NEW_EMAC_RXB=128
 CONFIG_IBM_NEW_EMAC_TXB=64
@@ -577,7 +617,6 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -646,6 +685,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -663,6 +703,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IBM_IIC=y
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_OCORES is not set
@@ -685,12 +726,9 @@ CONFIG_I2C_IBM_IIC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -699,7 +737,30 @@ CONFIG_EEPROM_LEGACY=y
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -721,6 +782,7 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -735,11 +797,15 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -785,6 +851,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
@@ -870,11 +937,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -915,7 +982,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -929,6 +995,8 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -946,6 +1014,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_WBSD is not set
+CONFIG_MMC_PIKASD=y
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -953,16 +1022,31 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_GPIO_PLATFORM is not set
+CONFIG_LEDS_GPIO_OF=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
 #
-# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -973,6 +1057,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -993,6 +1078,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1039,6 +1129,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1049,6 +1145,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1060,7 +1157,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1115,6 +1211,7 @@ CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1122,7 +1219,7 @@ CONFIG_NLS_UTF8=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1130,16 +1227,19 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
 #
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
@@ -1152,11 +1252,15 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1180,9 +1284,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1190,24 +1297,27 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
 # CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
-CONFIG_BDI_SWITCH=y
+# CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1223,6 +1333,8 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 # CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1294,13 +1406,15 @@ CONFIG_CRYPTO=y
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
 
 #
 # Random Number Generation
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index 27893971377..a2df0635b6d 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:05 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:02 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,6 +56,7 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_REDBOOT=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -60,6 +64,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_PPC_83xx=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 CONFIG_ASP834x=y
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -490,6 +512,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -525,7 +548,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -545,14 +570,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -599,6 +627,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -618,8 +647,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -786,13 +817,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -847,6 +882,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -900,24 +936,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -960,6 +981,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1069,6 +1091,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1096,6 +1119,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1115,10 +1142,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1192,6 +1221,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1287,6 +1317,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1312,22 +1343,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
index bf0853f29f3..93ebd443a18 100644
--- a/arch/powerpc/configs/83xx/kmeter1_defconfig
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -1,25 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Apr  3 10:34:33 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:03 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,21 +33,22 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -52,11 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -71,19 +78,30 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -93,17 +111,23 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -116,10 +140,15 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -127,11 +156,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,14 +173,11 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -179,6 +202,8 @@ CONFIG_PPC_83xx=y
 CONFIG_KMETER1=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -194,6 +219,8 @@ CONFIG_IPIC=y
 CONFIG_QUICC_ENGINE=y
 # CONFIG_QE_GPIO is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -212,16 +239,17 @@ CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -233,12 +261,17 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -331,7 +364,10 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -342,8 +378,8 @@ CONFIG_LLC=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -362,6 +398,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -431,6 +468,11 @@ CONFIG_MTD_PHRAM=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 CONFIG_MTD_UBI=y
@@ -445,7 +487,6 @@ CONFIG_MTD_UBI_DEBUG=y
 # CONFIG_MTD_UBI_DEBUG_MSG is not set
 # CONFIG_MTD_UBI_DEBUG_PARANOID is not set
 # CONFIG_MTD_UBI_DEBUG_DISABLE_BGT is not set
-# CONFIG_MTD_UBI_DEBUG_USERSPACE_IO is not set
 # CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set
 # CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set
 # CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set
@@ -459,6 +500,7 @@ CONFIG_MTD_UBI_DEBUG=y
 # CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -505,10 +547,15 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -517,11 +564,12 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_NETDEV_10000 is not set
@@ -531,7 +579,10 @@ CONFIG_UCC_GETH=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 CONFIG_WAN=y
 CONFIG_HDLC=y
 # CONFIG_HDLC_RAW is not set
@@ -543,8 +594,6 @@ CONFIG_HDLC=y
 #
 # X.25/LAPB support is disabled
 #
-CONFIG_HDLC_KM=y
-CONFIG_FS_UCC_HDLC=y
 # CONFIG_DLCI is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
@@ -600,16 +649,18 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-CONFIG_BOOTCOUNT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
@@ -642,20 +693,20 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -677,27 +728,15 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -720,11 +759,16 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 # CONFIG_UIO_PDRV_GENIRQ is not set
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -736,9 +780,12 @@ CONFIG_UIO=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -748,6 +795,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -772,10 +824,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -796,6 +845,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -804,6 +854,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -815,7 +866,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -845,11 +895,13 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -859,11 +911,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -883,13 +936,18 @@ CONFIG_DEBUG_FS=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index c5c0fe71a43..ff33a7db2ea 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:04 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC831x_RDB=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -503,6 +525,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -539,7 +562,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -562,10 +587,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -583,6 +604,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -591,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -610,7 +633,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -643,14 +665,17 @@ CONFIG_MD_RAID1=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -714,6 +739,8 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -735,8 +762,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -924,7 +953,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -938,13 +966,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1002,6 +1035,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1056,24 +1090,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1135,6 +1155,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1144,9 +1165,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1235,8 +1256,9 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
@@ -1244,9 +1266,11 @@ CONFIG_USB_GADGET_SELECTED=y
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_GADGETFS is not set
@@ -1298,6 +1322,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1332,6 +1357,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1351,10 +1380,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1428,6 +1459,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1464,7 +1496,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1488,6 +1559,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1518,6 +1590,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1529,7 +1604,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1543,16 +1617,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1560,6 +1633,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index af4952feba3..76237d46670 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:05 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC831x_RDB=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -503,6 +525,7 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -539,7 +562,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -562,10 +587,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -583,6 +604,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -591,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -610,7 +633,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -704,14 +726,17 @@ CONFIG_MD_RAID1=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -775,6 +800,8 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -796,8 +823,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -985,7 +1014,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -999,13 +1027,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1063,6 +1096,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1117,24 +1151,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1196,6 +1216,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1205,9 +1226,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1296,8 +1317,9 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
@@ -1305,9 +1327,11 @@ CONFIG_USB_GADGET_SELECTED=y
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_GADGETFS is not set
@@ -1359,6 +1383,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1393,6 +1418,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1412,10 +1441,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1489,6 +1520,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1525,7 +1557,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1549,6 +1620,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1579,6 +1651,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1590,7 +1665,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1604,16 +1678,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1621,6 +1694,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 8c8f660b4fc..e0e36a11340 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:07 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:06 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC832x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -404,6 +426,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -438,7 +461,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -461,10 +486,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -482,6 +503,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -490,6 +512,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -509,7 +532,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -532,14 +554,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -586,6 +611,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -605,11 +631,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -787,13 +815,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -848,6 +880,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -896,23 +929,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -996,6 +1015,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1023,6 +1043,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1042,10 +1066,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1108,6 +1134,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1165,6 +1192,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1190,22 +1218,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 227dbba7679..4f27d454822 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:08 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:07 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC832x_RDB=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -405,6 +427,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -441,7 +464,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -464,10 +489,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -485,6 +506,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -493,6 +515,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -512,7 +535,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -535,14 +557,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -590,6 +615,8 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -609,11 +636,13 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -804,7 +833,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -817,13 +845,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -881,6 +914,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -935,24 +969,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1014,6 +1034,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1023,9 +1044,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1127,6 +1148,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_WBSD is not set
 # CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_SPI=y
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1136,6 +1159,10 @@ CONFIG_MMC_SPI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1155,10 +1182,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1224,6 +1253,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1325,6 +1355,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1350,22 +1381,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 24ee7fcac87..648dac0c9d8 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:09 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:07 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC834x_ITX=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -487,6 +509,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -523,7 +546,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -594,10 +619,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -615,6 +636,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -623,6 +645,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -642,7 +665,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -737,14 +759,17 @@ CONFIG_MD_RAID1=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -791,8 +816,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -960,7 +987,6 @@ CONFIG_I2C_MPC=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -973,13 +999,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1026,24 +1057,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1085,6 +1102,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1208,6 +1226,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1242,6 +1261,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1261,10 +1284,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1331,6 +1356,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1429,6 +1455,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1454,22 +1481,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 7f39543205a..bf6deb831dc 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:10 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:08 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC834x_ITX=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -487,6 +509,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -523,7 +546,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -546,10 +571,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -567,6 +588,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -575,6 +597,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -594,7 +617,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -617,14 +639,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -671,8 +696,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -840,7 +867,6 @@ CONFIG_I2C_MPC=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -853,13 +879,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -906,24 +937,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -965,6 +982,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1087,6 +1105,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1121,6 +1140,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1140,10 +1163,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1210,6 +1235,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1308,6 +1334,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1333,22 +1360,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 1cd1fcac22c..3236c47712c 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:11 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:09 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC834x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -403,6 +425,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -437,7 +460,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -457,14 +482,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -527,6 +555,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -548,8 +577,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -724,13 +755,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -785,6 +820,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -833,23 +869,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -933,6 +955,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -960,6 +983,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -979,10 +1006,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1045,6 +1074,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1100,6 +1130,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1125,22 +1156,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index ce5177393a0..8c5299d7481 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:12 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:10 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC836x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_AMIGAONE is not set
@@ -233,6 +249,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -253,9 +270,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -364,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -381,7 +399,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -485,6 +507,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -519,7 +542,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -542,10 +567,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -563,6 +584,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -571,6 +593,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -590,7 +613,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -613,14 +635,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -667,6 +692,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -686,11 +712,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -868,13 +896,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -929,6 +961,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -977,23 +1010,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1077,6 +1096,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1104,6 +1124,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1123,10 +1147,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1190,6 +1216,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1247,6 +1274,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1272,22 +1300,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index 7f1d1383a24..ff31667a890 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:13 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:12 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -54,12 +57,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_MPC836x_RDK=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_AMIGAONE is not set
@@ -233,6 +249,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -253,9 +270,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -498,6 +520,7 @@ CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -533,7 +556,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -553,14 +578,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -607,11 +635,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -777,7 +807,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -791,13 +820,18 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BITBANG=y
 # CONFIG_SPI_GPIO is not set
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -865,23 +899,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -990,6 +1011,10 @@ CONFIG_HID=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1009,10 +1034,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1086,6 +1113,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1145,6 +1173,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1170,22 +1199,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index bf636fd560a..e285ec0fe95 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:12 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:11 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,8 +125,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_MPC837x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -403,6 +425,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -437,7 +460,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -460,10 +485,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -481,6 +502,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -489,6 +511,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -508,7 +531,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -592,14 +614,17 @@ CONFIG_ATA_SFF=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -646,6 +671,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -665,8 +691,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -844,13 +872,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -905,6 +937,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -953,23 +986,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1026,6 +1045,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1045,10 +1068,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1111,6 +1136,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1170,6 +1196,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1193,22 +1220,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index fe6454eacbd..1ab3e4cd301 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:14 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:13 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,8 +125,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_PPC_83xx=y
 CONFIG_MPC837x_RDB=y
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -360,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -377,7 +395,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -398,6 +420,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -433,7 +456,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -456,10 +481,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -476,6 +497,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -484,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -503,7 +526,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -598,14 +620,17 @@ CONFIG_MD_RAID6_PQ=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -652,6 +677,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -671,8 +697,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -842,13 +870,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -903,6 +935,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -956,24 +989,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1011,7 +1029,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1028,10 +1046,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1057,6 +1076,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1141,6 +1161,10 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1160,10 +1184,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1226,6 +1252,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1262,7 +1289,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1285,6 +1351,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1308,22 +1375,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index fe08f672cb2..a592b5efdc4 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:15 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:13 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,8 +124,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -134,6 +145,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +161,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -188,6 +203,7 @@ CONFIG_PPC_83xx=y
 # CONFIG_MPC837x_RDB is not set
 CONFIG_SBC834x=y
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -232,6 +248,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +269,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -363,6 +380,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -380,7 +398,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -401,6 +423,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -435,7 +458,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -455,14 +480,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -509,6 +537,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -528,8 +557,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -688,13 +719,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -749,6 +784,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -797,23 +833,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -851,6 +873,10 @@ CONFIG_HID=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -862,10 +888,12 @@ CONFIG_HID=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -928,6 +956,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -971,6 +1000,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -994,22 +1024,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 09146ddaa3c..ff04e1028f5 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:16 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:14 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +111,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,8 +123,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -136,6 +145,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -143,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -176,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -224,6 +239,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +258,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -346,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +380,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -466,6 +487,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -520,7 +542,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -560,6 +581,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FCC=y
@@ -567,6 +589,7 @@ CONFIG_FS_ENET_MDIO_FCC=y
 CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -654,6 +677,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -710,22 +738,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -777,6 +790,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -797,10 +814,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -916,6 +935,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -946,6 +966,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -958,7 +981,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -972,16 +994,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -990,9 +1011,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 7b43be7586b..fb10cc83702 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:15 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,8 +126,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -138,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -145,7 +158,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -178,6 +191,7 @@ CONFIG_MPC8540_ADS=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -226,6 +240,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -244,9 +259,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -348,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,7 +381,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -387,6 +407,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -423,7 +444,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -462,9 +482,11 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -555,6 +577,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -590,22 +617,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -657,6 +669,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -676,10 +692,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -794,6 +812,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -824,6 +843,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -835,7 +857,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -849,16 +870,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -866,6 +886,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 62adb71a5d4..5c8ce697882 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:16 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -112,7 +115,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -125,9 +127,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -141,6 +150,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +161,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -181,6 +194,7 @@ CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -229,6 +243,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -247,9 +262,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -360,6 +375,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -377,7 +393,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -400,6 +420,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -431,6 +452,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -450,14 +472,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -504,6 +529,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -527,8 +553,10 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -646,6 +674,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -707,22 +740,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -779,6 +797,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -798,10 +820,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -916,6 +940,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -946,6 +971,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -957,7 +985,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -971,16 +998,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -988,6 +1014,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index 41209e3a654..158e63e8607 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:18 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:17 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,9 +126,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx_CDS=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -227,6 +241,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -245,9 +260,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -358,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -375,7 +391,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -397,6 +417,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -428,6 +449,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -502,14 +524,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -556,6 +581,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -575,8 +601,10 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -698,6 +726,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -737,22 +770,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -809,6 +827,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -828,10 +850,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -946,6 +970,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -976,6 +1001,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -987,7 +1015,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1001,16 +1028,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1018,6 +1044,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 6c36c9c7abf..2726fca1d69 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:19 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:18 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,8 +125,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -224,6 +238,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +257,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -354,6 +369,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -371,7 +387,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -391,6 +411,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -422,6 +443,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -441,14 +463,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -495,6 +520,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -514,8 +540,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -637,6 +665,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -676,22 +709,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -721,6 +739,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -732,10 +754,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -838,6 +862,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -861,22 +886,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 4aaf1a6bdc7..b0c469823b0 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:20 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:19 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,7 +126,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -224,6 +238,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +257,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -346,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +379,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -385,6 +405,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -421,7 +442,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -460,9 +480,11 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -551,6 +573,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -586,22 +613,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -690,6 +702,10 @@ CONFIG_RTC_DRV_M48T59=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -701,10 +717,12 @@ CONFIG_RTC_DRV_M48T59=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -819,6 +837,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -848,6 +867,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -859,7 +881,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -873,16 +894,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -890,6 +910,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index 79984589db6..04c85dada84 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:21 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:19 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -109,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -149,7 +162,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -182,6 +195,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 CONFIG_SOCRATES=y
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -229,6 +243,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -247,9 +262,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -357,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,6 +389,7 @@ CONFIG_CAN_BCM=y
 # CAN Device Drivers
 #
 # CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_DEV is not set
 # CONFIG_CAN_DEBUG_DEVICES is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -382,7 +399,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -499,6 +520,7 @@ CONFIG_MTD_NAND_SOCRATES=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -535,7 +557,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -558,10 +582,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -588,14 +608,17 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -643,6 +666,8 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -662,8 +687,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -733,6 +760,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -746,6 +774,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -862,7 +891,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -875,12 +903,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -938,6 +972,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -973,24 +1008,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1110,7 +1131,7 @@ CONFIG_USB_HID=y
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
@@ -1124,10 +1145,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1153,6 +1175,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1162,9 +1185,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1284,6 +1307,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1318,6 +1342,10 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1337,10 +1365,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1449,7 +1479,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1473,6 +1542,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1498,22 +1568,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index bd1bfcddbd0..e7e81d6769f 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:22 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:20 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -112,7 +115,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -125,9 +127,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -142,6 +151,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -153,7 +166,7 @@ CONFIG_MODULES=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -186,6 +199,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 CONFIG_STX_GP3=y
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -234,6 +248,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +267,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -425,6 +440,7 @@ CONFIG_IP_NF_FILTER=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -442,7 +458,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -466,6 +486,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=m
+CONFIG_OF_MDIO=y
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_PC_FIFO is not set
@@ -507,7 +528,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -581,10 +604,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
@@ -602,6 +621,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -610,6 +630,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -631,7 +652,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -654,14 +674,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -708,6 +731,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NET_POCKET is not set
 # CONFIG_ATL2 is not set
 # CONFIG_FS_ENET is not set
@@ -729,8 +753,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -802,12 +828,13 @@ CONFIG_INPUT_EVDEV=m
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -821,6 +848,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -911,6 +939,7 @@ CONFIG_I2C_ALGOBIT=m
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_OCORES is not set
@@ -941,13 +970,17 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1027,6 +1060,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1060,23 +1094,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1143,6 +1163,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1162,10 +1186,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1316,6 +1342,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1346,6 +1373,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1358,7 +1388,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1372,16 +1401,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1389,6 +1417,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index 767600145fb..2c407523aad 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:21 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -109,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
 # CONFIG_TQM8541 is not set
@@ -225,6 +239,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -243,9 +258,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -353,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -370,7 +386,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -471,6 +491,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -505,7 +526,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -580,14 +603,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -650,6 +676,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -671,8 +698,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -850,13 +879,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -911,6 +944,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -945,23 +979,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1018,6 +1038,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1037,10 +1061,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1167,6 +1193,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1192,22 +1219,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 52fafc006dd..845731dc51c 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:22 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 CONFIG_TQM8541=y
@@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,7 +389,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 8b4faae7a9a..4f228a90527 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:24 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:23 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,9 +126,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -140,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -152,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -185,6 +198,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -234,6 +248,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +267,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -281,6 +296,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -368,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -497,6 +515,7 @@ CONFIG_MTD_NAND_FSL_UPM=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -531,7 +550,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -551,14 +572,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -605,6 +629,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -624,8 +649,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -801,13 +828,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -862,6 +893,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -896,23 +928,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -977,6 +995,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1004,6 +1023,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1015,10 +1038,12 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1145,6 +1170,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1175,6 +1201,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1187,7 +1216,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1201,16 +1229,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1218,6 +1245,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 170360934ce..9196724bebc 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:25 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:24 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,7 +389,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index f41cc2444d4..2e49a6e9faf 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:26 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:25 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,7 +389,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
index 2552cbefba6..1025da2bf06 100644
--- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Thu Jun 11 11:25:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:25 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -35,15 +35,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -64,6 +65,7 @@ CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +116,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +128,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -144,6 +152,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -157,7 +169,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -239,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -258,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -287,6 +300,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
@@ -404,6 +419,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -540,6 +556,7 @@ CONFIG_MTD_NAND_FSL_UPM=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -575,7 +592,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -599,10 +618,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -619,6 +634,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -627,6 +643,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -646,7 +663,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -730,14 +746,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -784,6 +803,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -803,8 +823,10 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -986,13 +1008,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1072,6 +1098,7 @@ CONFIG_SENSORS_LM90=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1126,23 +1153,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1187,7 +1200,7 @@ CONFIG_USB_HID=y
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
@@ -1201,10 +1214,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1230,6 +1244,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
@@ -1325,7 +1340,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
 CONFIG_LEDS_GPIO_OF=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 CONFIG_LEDS_PCA955X=y
 # CONFIG_LEDS_BD2802 is not set
 
@@ -1352,8 +1367,6 @@ CONFIG_EDAC=y
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1385,6 +1398,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1425,6 +1439,10 @@ CONFIG_NET_DMA=y
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1444,11 +1462,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1629,6 +1648,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1659,6 +1679,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1671,7 +1694,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1685,16 +1707,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1702,6 +1723,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index b6a23af57f4..527ad1a5e80 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:31 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:31 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -112,9 +117,7 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,8 +130,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -143,6 +153,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -156,7 +170,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -216,7 +230,7 @@ CONFIG_MPIC=y
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -235,6 +249,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -285,14 +300,32 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
-CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
@@ -353,8 +386,8 @@ CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -380,174 +413,26 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_SECURITY is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
-CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_HL is not set
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
-CONFIG_BRIDGE=m
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
 # CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
-CONFIG_LLC=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
+# CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
 #
@@ -560,12 +445,7 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -580,9 +460,9 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -672,6 +552,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -707,9 +588,60 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
 
 #
 # SCSI device support
@@ -731,10 +663,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -751,6 +679,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -759,6 +688,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -778,7 +708,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -791,6 +720,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
@@ -842,6 +772,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
@@ -862,14 +793,17 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -916,6 +850,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -935,8 +870,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -963,22 +900,8 @@ CONFIG_GIANFAR=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_SOLOS is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 CONFIG_PPP=m
@@ -990,7 +913,6 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
 # CONFIG_PPPOL2TP is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
@@ -1010,7 +932,7 @@ CONFIG_NET_POLL_CONTROLLER=y
 # Input device support
 #
 CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -1058,6 +980,7 @@ CONFIG_DEVKMEM=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -1080,6 +1003,14 @@ CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
@@ -1143,18 +1074,21 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # Memory mapped GPIO expanders:
@@ -1229,6 +1163,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1284,24 +1219,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1346,7 +1266,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1363,10 +1283,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1392,6 +1313,7 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1401,6 +1323,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1475,7 +1399,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
-# CONFIG_USB_ATM is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1521,6 +1444,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1548,6 +1472,10 @@ CONFIG_RTC_DRV_RX8581=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1569,10 +1497,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1589,8 +1519,11 @@ CONFIG_INOTIFY_USER=y
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
@@ -1598,8 +1531,8 @@ CONFIG_INOTIFY_USER=y
 CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1649,6 +1582,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1723,13 +1657,13 @@ CONFIG_NLS_UTF8=m
 #
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
+CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
@@ -1738,6 +1672,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1750,75 +1685,24 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1826,15 +1710,9 @@ CONFIG_PRINT_STACK_DEPTH=64
 # Security options
 #
 # CONFIG_KEYS is not set
-CONFIG_SECURITY=y
+# CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1854,11 +1732,11 @@ CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_NULL is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Authenticated Encryption with Associated Data
@@ -1873,53 +1751,52 @@ CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_ECB is not set
 # CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_PCBC is not set
 # CONFIG_CRYPTO_XTS is not set
 
 #
 # Hash modes
 #
-CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_XCBC is not set
 
 #
 # Digest
 #
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_RMD128 is not set
 # CONFIG_CRYPTO_RMD160 is not set
 # CONFIG_CRYPTO_RMD256 is not set
 # CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_WP512 is not set
 
 #
 # Ciphers
 #
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
 # Compression
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index a66910e6334..cd338d493be 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:29 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:29 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -91,7 +96,11 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -109,7 +118,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,8 +130,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -138,6 +153,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -151,7 +170,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -168,7 +187,6 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_FREEZER is not set
-CONFIG_PPC_MSI_BITMAP=y
 
 #
 # Platform support
@@ -212,7 +230,7 @@ CONFIG_MPIC=y
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -231,6 +249,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -281,13 +300,32 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
+# CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
@@ -393,6 +431,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -421,7 +460,9 @@ CONFIG_FIB_RULES=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -511,6 +552,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -546,9 +588,60 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
 
 #
 # SCSI device support
@@ -570,10 +663,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -590,6 +679,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -598,6 +688,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -617,7 +708,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -630,6 +720,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
@@ -647,14 +738,17 @@ CONFIG_SATA_SIL24=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -701,6 +795,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -720,8 +815,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -748,6 +845,7 @@ CONFIG_GIANFAR=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -827,6 +925,7 @@ CONFIG_DEVKMEM=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -849,6 +948,14 @@ CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
@@ -912,13 +1019,17 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -997,6 +1108,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1052,24 +1164,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1114,7 +1211,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1131,10 +1228,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1160,6 +1258,7 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1169,6 +1268,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1288,6 +1389,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1315,6 +1417,10 @@ CONFIG_RTC_DRV_RX8581=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1336,10 +1442,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1419,6 +1527,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1508,6 +1617,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1531,23 +1641,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index c6a7fc82b69..ba47883f4aa 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:30 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:30 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,8 +131,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -143,6 +154,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -156,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -235,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -285,6 +301,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -510,6 +528,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -566,7 +585,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -678,6 +701,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -713,7 +737,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -737,10 +763,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -757,6 +779,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -765,6 +788,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -784,7 +808,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -868,14 +891,17 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -922,6 +948,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -941,8 +968,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -1149,13 +1178,17 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1235,6 +1268,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1290,24 +1324,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1352,7 +1371,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1369,10 +1388,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1398,6 +1418,7 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1407,6 +1428,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1527,6 +1550,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1554,6 +1578,10 @@ CONFIG_RTC_DRV_RX8581=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1575,10 +1603,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1645,6 +1675,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1734,6 +1765,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1759,10 +1791,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1774,7 +1810,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1788,17 +1823,16 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1806,6 +1840,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1829,7 +1866,6 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 # CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index cfd2efcc6bc..a61f183f718 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:28 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:27 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,11 +56,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -109,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,9 +126,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -138,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -150,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -230,6 +245,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -250,9 +266,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -279,6 +295,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -381,6 +399,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -398,7 +417,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -549,7 +572,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -620,10 +645,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -640,6 +661,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -648,6 +670,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -667,7 +690,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -751,14 +773,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -792,6 +817,7 @@ CONFIG_ULI526X=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -959,13 +985,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -993,23 +1023,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1106,6 +1122,11 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -1130,6 +1151,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1160,6 +1182,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1251,6 +1274,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1278,6 +1302,10 @@ CONFIG_RTC_DRV_CMOS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1297,12 +1325,15 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1464,6 +1495,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1494,6 +1526,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1506,7 +1541,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1520,16 +1554,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1537,6 +1570,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 0bee3e30394..7016ce73260 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:28 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:28 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -54,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -113,7 +118,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -126,9 +130,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -143,6 +154,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -156,7 +171,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -234,7 +249,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +273,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -401,6 +418,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -419,7 +437,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -444,6 +466,7 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -479,7 +502,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -503,10 +528,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -524,6 +545,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -532,6 +554,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -551,7 +574,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -635,14 +657,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -689,6 +714,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -708,8 +734,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -909,13 +937,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -943,76 +975,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1017,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1078,6 +1048,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1108,6 +1079,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1152,7 +1124,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1169,10 +1141,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1198,6 +1171,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1207,9 +1181,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1329,6 +1303,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1356,6 +1331,10 @@ CONFIG_RTC_DRV_CMOS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1375,11 +1354,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1454,6 +1434,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1555,6 +1536,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1585,6 +1567,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1597,7 +1582,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1611,16 +1595,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1628,6 +1611,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index c30a0c71587..f5ca2e0cd40 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:27 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:26 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -55,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -113,7 +118,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -126,8 +130,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -142,6 +153,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -155,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -284,6 +301,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -508,6 +527,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -564,7 +584,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -675,6 +699,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -709,7 +734,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -736,6 +763,7 @@ CONFIG_BLK_DEV_DM=y
 CONFIG_DM_CRYPT=y
 CONFIG_DM_SNAPSHOT=y
 CONFIG_DM_MIRROR=y
+# CONFIG_DM_LOG_USERSPACE is not set
 CONFIG_DM_ZERO=y
 # CONFIG_DM_MULTIPATH is not set
 # CONFIG_DM_DELAY is not set
@@ -747,14 +775,17 @@ CONFIG_DM_ZERO=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -801,6 +832,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -820,8 +852,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -1018,13 +1052,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1079,6 +1117,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1127,23 +1166,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1207,6 +1232,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1236,8 +1265,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 # CONFIG_REISERFS_FS_SECURITY is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_STATS=y
@@ -1245,6 +1274,8 @@ CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 # CONFIG_OCFS2_FS_POSIX_ACL is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1318,6 +1349,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1409,6 +1441,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1434,10 +1467,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1449,7 +1486,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1463,17 +1499,16 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1482,9 +1517,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1505,7 +1544,6 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 # CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 74f7f7c6fdc..aece6bb5f73 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:50 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:47 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,12 +50,14 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_REDBOOT=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -101,7 +104,6 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -114,8 +116,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -129,13 +138,18 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,6 +234,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_8XX_MINIMAL_FPEMU is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -239,9 +254,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -280,6 +295,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -336,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -353,7 +370,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -452,6 +473,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
@@ -469,7 +491,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -508,6 +529,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FEC=y
@@ -556,11 +578,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -622,6 +644,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -644,22 +671,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -685,6 +697,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -696,12 +712,15 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -818,6 +837,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -846,6 +866,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -857,7 +880,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -870,16 +892,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -888,9 +909,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 9ffa8de9280..8105360d53f 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:51 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:48 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_CHECK_CACHE_COHERENCY=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -54,11 +57,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -118,7 +123,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -131,16 +135,23 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -150,6 +161,11 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -162,7 +178,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -258,6 +274,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -279,9 +296,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -331,6 +348,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -583,6 +601,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -663,7 +682,11 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -772,6 +795,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=m
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -816,10 +840,6 @@ CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
@@ -836,6 +856,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 CONFIG_BLK_DEV_3W_XXXX_RAID=m
 CONFIG_SCSI_3W_9XXX=m
 CONFIG_SCSI_ACARD=m
@@ -854,6 +875,7 @@ CONFIG_AIC79XX_RESET_DELAY_MS=15000
 CONFIG_AIC79XX_DEBUG_MASK=0
 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 CONFIG_SCSI_ARCMSR=m
@@ -875,7 +897,6 @@ CONFIG_SCSI_GDTH=m
 CONFIG_SCSI_IPS=m
 CONFIG_SCSI_INITIO=m
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
@@ -903,14 +924,17 @@ CONFIG_SCSI_LPFC=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -957,6 +981,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -976,6 +1001,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -1177,13 +1203,17 @@ CONFIG_I2C_MV64XXX=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1238,6 +1268,7 @@ CONFIG_SENSORS_SMSC47M1=m
 CONFIG_SENSORS_SMSC47B397=m
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 CONFIG_SENSORS_VIA686A=m
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1266,7 +1297,6 @@ CONFIG_SOFT_WATCHDOG=m
 #
 CONFIG_PCIPCWATCHDOG=m
 CONFIG_WDTPCI=m
-CONFIG_WDT_501_PCI=y
 
 #
 # USB-based Watchdog Cards
@@ -1289,23 +1319,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1354,6 +1370,7 @@ CONFIG_USB_MON=m
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1362,9 +1379,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1545,6 +1562,10 @@ CONFIG_DMADEVICES=y
 #
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1563,11 +1584,12 @@ CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1652,6 +1674,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1764,6 +1787,7 @@ CONFIG_HAS_DMA=y
 CONFIG_CHECK_SIGNATURE=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1794,6 +1818,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 CONFIG_STACKTRACE=y
@@ -1807,7 +1834,6 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
@@ -1824,30 +1850,34 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1869,7 +1899,6 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 04915c3a43f..0aa5b43ffeb 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:52 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:49 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -99,7 +104,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -112,8 +116,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -127,6 +138,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -134,7 +149,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -213,6 +228,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -228,9 +244,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -300,6 +316,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -380,7 +397,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -485,6 +506,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -520,13 +542,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
 #
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -573,6 +599,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -594,8 +621,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -685,6 +714,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -728,22 +761,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -771,6 +789,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -787,9 +809,10 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -935,6 +958,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -960,6 +984,9 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -971,7 +998,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -985,22 +1011,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index c2a439595f4..2c292e25cc0 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:53 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:49 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +50,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -100,7 +103,6 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -113,8 +115,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -128,13 +137,17 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,6 +233,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -239,9 +253,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -280,6 +294,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -336,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -353,7 +369,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -452,6 +472,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
@@ -469,7 +490,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -508,6 +528,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FEC=y
@@ -579,6 +600,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -602,22 +628,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -642,6 +653,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -653,12 +668,15 @@ CONFIG_DAB=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -775,6 +793,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -803,6 +822,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -814,7 +836,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -827,16 +848,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -844,6 +864,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index a4053ab9e24..45671e7dd2c 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:54 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:50 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -143,6 +154,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -155,7 +170,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -237,6 +252,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -257,9 +273,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -480,6 +496,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -498,7 +515,11 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -647,7 +668,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=m
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -670,10 +693,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -691,6 +710,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -699,6 +719,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -718,7 +739,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -802,14 +822,17 @@ CONFIG_PATA_SIL680=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -846,6 +869,7 @@ CONFIG_TULIP_MMIO=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -865,8 +889,10 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -1074,13 +1100,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1135,6 +1165,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1169,23 +1200,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1245,6 +1262,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1254,9 +1272,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1423,6 +1441,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1450,6 +1469,10 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1469,14 +1492,16 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1548,6 +1573,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
@@ -1578,7 +1604,7 @@ CONFIG_CIFS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1645,6 +1671,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1675,6 +1702,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1686,7 +1716,6 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1700,16 +1729,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1717,6 +1745,8 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 31e1df66515..e9491c1c3f3 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:55 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:51 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,6 +56,7 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_HIBERNATE_32=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
@@ -60,6 +64,7 @@ CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -105,7 +110,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -119,8 +123,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -134,6 +145,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -141,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -225,6 +241,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -240,9 +257,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -313,6 +330,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -374,7 +392,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -484,6 +506,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -523,13 +546,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
 #
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -577,6 +604,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
@@ -654,6 +682,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -697,22 +729,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -740,6 +757,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -757,9 +778,10 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -916,6 +938,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -941,6 +964,9 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -952,7 +978,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -966,16 +991,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -983,9 +1007,12 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 24fa90792c5..1ae85a3b294 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:55 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:52 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -48,11 +49,13 @@ CONFIG_OF=y
 # CONFIG_PPC_UDBG_16550 is not set
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -102,7 +105,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -115,7 +117,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -129,6 +138,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -136,7 +150,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -222,6 +236,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -241,9 +256,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -281,6 +296,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -342,6 +358,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -359,7 +376,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -463,6 +484,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -492,7 +514,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -531,6 +552,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
 # CONFIG_FS_ENET_HAS_FEC is not set
@@ -602,6 +624,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -625,22 +652,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -665,6 +677,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -687,10 +703,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -823,6 +841,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -844,24 +863,14 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 642ab67c843..f23428c3b34 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:56 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:53 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -106,7 +111,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -119,9 +123,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -134,6 +145,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -141,7 +156,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,6 +235,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -240,9 +256,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -348,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,7 +382,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -385,6 +406,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -416,6 +438,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -438,10 +461,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -458,6 +477,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -466,6 +486,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -485,7 +506,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -568,14 +588,17 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -642,6 +665,7 @@ CONFIG_8139TOO=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -663,7 +687,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_TSI108_ETH=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -785,6 +811,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -824,22 +855,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -896,6 +912,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -915,11 +935,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1038,6 +1059,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1063,22 +1085,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index cb966ca2ce8..02716f72db6 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:57 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:54 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -99,7 +104,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -112,9 +116,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -128,6 +139,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -135,7 +150,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -216,6 +231,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -231,9 +247,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -303,6 +319,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -383,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -489,6 +510,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -524,13 +546,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -577,6 +603,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -598,8 +625,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -671,12 +700,13 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -741,6 +771,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -784,22 +818,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -828,6 +847,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -847,9 +870,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -998,6 +1022,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1028,6 +1053,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1039,7 +1067,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1053,22 +1080,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 433c303eb82..4a96cb6925b 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:58 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:55 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -54,6 +57,7 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_REDBOOT=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -61,6 +65,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +115,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,8 +127,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -138,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -150,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -192,6 +207,7 @@ CONFIG_MPC837x_MDS=y
 CONFIG_MPC837x_RDB=y
 CONFIG_SBC834x=y
 CONFIG_ASP834x=y
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC831x=y
 CONFIG_PPC_MPC832x=y
 CONFIG_PPC_MPC834x=y
@@ -241,6 +257,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -261,9 +278,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -374,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -391,7 +409,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -507,6 +529,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -542,7 +565,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -565,10 +590,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -586,6 +607,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -594,6 +616,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -613,7 +636,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -697,14 +719,17 @@ CONFIG_ATA_SFF=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -751,6 +776,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -770,11 +796,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -965,13 +993,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1050,6 +1082,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1104,24 +1137,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1159,7 +1177,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1176,10 +1194,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1205,6 +1224,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1291,6 +1311,10 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1310,10 +1334,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1377,6 +1403,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1413,7 +1440,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
@@ -1438,6 +1504,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1461,22 +1528,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index c162724fed4..ada595898af 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Tue Apr 21 15:40:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:55 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -116,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -129,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -146,6 +155,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -158,7 +172,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -191,6 +205,7 @@ CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
 CONFIG_STX_GP3=y
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
@@ -241,7 +256,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -260,9 +277,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -296,7 +313,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -406,6 +424,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -424,7 +443,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -450,6 +473,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -485,7 +509,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -509,10 +535,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -530,6 +552,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -538,6 +561,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -557,7 +581,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -641,14 +664,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -695,6 +721,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
@@ -718,11 +745,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -897,6 +926,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_CPM=m
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -927,13 +957,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -987,76 +1021,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1096,6 +1063,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1122,6 +1094,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1152,6 +1125,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1196,7 +1170,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1213,10 +1187,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1242,6 +1217,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1251,9 +1227,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1352,8 +1328,6 @@ CONFIG_EDAC=y
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1385,6 +1359,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1425,6 +1400,10 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1445,11 +1424,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1524,6 +1504,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1628,6 +1609,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1658,6 +1640,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1670,7 +1655,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1684,16 +1668,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1702,9 +1685,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 1aa1c508d60..db082ce5a1c 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Tue Apr 21 15:41:18 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:56 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -35,15 +35,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -58,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -117,7 +120,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -130,9 +132,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -148,6 +157,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -161,7 +175,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -194,6 +208,7 @@ CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
 CONFIG_STX_GP3=y
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
@@ -244,7 +259,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -264,9 +281,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -300,7 +317,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -410,6 +428,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -428,7 +447,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -454,6 +477,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -489,7 +513,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -513,10 +539,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -534,6 +556,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -542,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -561,7 +585,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -645,14 +668,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -699,6 +725,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
@@ -722,11 +749,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -901,6 +930,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_CPM=m
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -931,13 +961,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -991,76 +1025,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1100,6 +1067,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1126,6 +1098,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1156,6 +1129,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1200,7 +1174,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1217,10 +1191,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1246,6 +1221,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1255,9 +1231,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1356,8 +1332,6 @@ CONFIG_EDAC=y
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1389,6 +1363,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1429,6 +1404,10 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1449,11 +1428,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1528,6 +1508,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1632,6 +1613,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1662,6 +1644,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1674,7 +1659,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1688,16 +1672,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1706,9 +1689,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 3add6f62b21..6809b61ed3d 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:00 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:57 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -48,11 +49,13 @@ CONFIG_OF=y
 # CONFIG_PPC_UDBG_16550 is not set
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -98,7 +101,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -111,8 +113,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -126,6 +135,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -133,7 +146,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -219,6 +232,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -238,9 +252,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -278,6 +292,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -339,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -356,7 +372,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -374,6 +394,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -407,7 +428,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -446,6 +466,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
 CONFIG_FS_ENET_HAS_FEC=y
@@ -453,6 +474,7 @@ CONFIG_FS_ENET_MDIO_FEC=y
 CONFIG_NETDEV_1000=y
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -496,11 +518,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -562,6 +584,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -597,22 +624,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -664,6 +676,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -685,10 +701,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -808,6 +826,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -831,22 +850,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 5bb1b8eb0b4..0e8684a3138 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:00 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:58 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -55,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -144,6 +155,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -157,7 +172,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -236,7 +251,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -258,9 +275,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -403,6 +420,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -421,7 +439,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -447,6 +469,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -482,7 +505,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -506,10 +531,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -527,6 +548,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -535,6 +557,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -554,7 +577,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -638,14 +660,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -692,6 +717,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -711,8 +737,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -913,13 +941,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -973,76 +1005,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1082,6 +1047,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1108,6 +1078,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1138,6 +1109,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1182,7 +1154,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1199,10 +1171,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1228,6 +1201,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1237,9 +1211,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1360,6 +1334,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1387,6 +1362,10 @@ CONFIG_RTC_DRV_CMOS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1406,11 +1385,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1485,6 +1465,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1586,6 +1567,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1616,6 +1598,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1628,7 +1613,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1642,16 +1626,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1659,6 +1642,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 42e64ebc279..dbe8e869a82 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:01 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:59 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +50,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -100,7 +103,6 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -113,8 +115,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -128,13 +137,17 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -227,6 +240,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -246,9 +260,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -287,6 +301,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -343,6 +358,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -360,7 +376,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -463,6 +483,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
@@ -480,7 +501,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -519,6 +539,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FEC=y
@@ -590,6 +611,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -613,22 +639,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -653,6 +664,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -664,12 +679,15 @@ CONFIG_DAB=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -786,6 +804,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -814,6 +833,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -825,7 +847,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -838,16 +859,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -855,6 +875,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 129d80860f2..ff96bb43c32 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:02 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:00 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -103,7 +108,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -116,9 +120,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -132,6 +143,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -139,7 +154,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -219,6 +234,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -234,9 +250,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -307,6 +323,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -387,7 +404,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -493,6 +514,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -518,6 +540,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -583,13 +606,17 @@ CONFIG_IDE_PROC_FS=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -636,6 +663,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -657,8 +685,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -730,12 +760,13 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -802,6 +833,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -845,22 +880,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -903,8 +923,9 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
@@ -912,9 +933,11 @@ CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_GADGETFS is not set
@@ -939,6 +962,10 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -958,9 +985,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1110,6 +1138,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1140,6 +1169,9 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1151,7 +1183,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1165,22 +1196,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index e9f287f313f..1293c465d7f 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:03 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:01 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_CHECK_CACHE_COHERENCY=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -54,11 +57,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_ANON_INODES=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -142,6 +153,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -149,7 +164,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -228,6 +243,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -249,9 +265,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -296,6 +312,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -357,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -374,7 +392,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -479,6 +501,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -514,7 +537,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -591,10 +616,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -611,6 +632,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -619,6 +641,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -638,7 +661,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -721,7 +743,11 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -730,7 +756,6 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -797,6 +822,7 @@ CONFIG_8139TOO=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -818,6 +844,7 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -1007,13 +1034,17 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1068,6 +1099,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1102,23 +1134,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1163,6 +1181,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
@@ -1180,9 +1199,14 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_ZEROPLUS=y
 CONFIG_ZEROPLUS_FF=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1207,6 +1231,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1215,6 +1240,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1322,6 +1349,7 @@ CONFIG_RTC_DRV_MAX6900=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1349,6 +1377,10 @@ CONFIG_RTC_DRV_MAX6900=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1368,11 +1400,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1469,7 +1502,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1494,6 +1566,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1519,22 +1592,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index e28e65e7a0e..7de127e4cee 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Fri May 15 10:37:00 2009
+# Linux kernel version: 2.6.31-rc7
+# Mon Aug 24 17:38:50 2009
 #
 CONFIG_PPC64=y
 
 #
 # Processor support
 #
+CONFIG_PPC_BOOK3S_64=y
 CONFIG_PPC_BOOK3S=y
 # CONFIG_POWER4_ONLY is not set
 CONFIG_POWER3=y
@@ -20,6 +21,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_64=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_64BIT=y
@@ -31,6 +33,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -41,7 +44,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_ARCH_HAS_ILOG2_U64=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_PPC=y
@@ -62,6 +64,7 @@ CONFIG_DTC=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -113,7 +116,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -126,7 +128,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -145,6 +154,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -210,7 +224,7 @@ CONFIG_PPC_CELL=y
 #
 # Cell Broadband Engine options
 #
-CONFIG_SPU_FS=y
+CONFIG_SPU_FS=m
 CONFIG_SPU_FS_64K_LS=y
 # CONFIG_SPU_TRACE is not set
 CONFIG_SPU_BASE=y
@@ -255,6 +269,7 @@ CONFIG_BINFMT_MISC=y
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 # CONFIG_IOMMU_VMERGE is not set
 CONFIG_IOMMU_HELPER=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -285,9 +300,9 @@ CONFIG_MIGRATION=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_PPC_HAS_HASH_64K=y
 CONFIG_PPC_4K_PAGES=y
@@ -399,6 +414,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -433,11 +449,14 @@ CONFIG_BT_HCIBTUSB=m
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
 # CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEBUGFS is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 # CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
+CONFIG_MAC80211_DEFAULT_PS=y
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
 
 #
 # Rate control algorithm selection
@@ -447,7 +466,6 @@ CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
 # CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
 CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
 # CONFIG_MAC80211_LEDS is not set
 # CONFIG_MAC80211_DEBUGFS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
@@ -472,77 +490,7 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
+# CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -590,10 +538,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -626,7 +570,6 @@ CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_UEVENT is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -646,10 +589,11 @@ CONFIG_MII=m
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_GELIC_NET=y
 CONFIG_GELIC_WIRELESS=y
-CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
+# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
 # CONFIG_NETDEV_10000 is not set
 
 #
@@ -669,8 +613,7 @@ CONFIG_WLAN_80211=y
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
 
 #
@@ -682,7 +625,7 @@ CONFIG_ZD1211RW=m
 #
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
+# CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
@@ -693,10 +636,11 @@ CONFIG_USB_NET_AX8817X=m
 # CONFIG_USB_NET_GL620A is not set
 # CONFIG_USB_NET_NET1080 is not set
 # CONFIG_USB_NET_PLUSB is not set
-CONFIG_USB_NET_MCS7830=m
+# CONFIG_USB_NET_MCS7830 is not set
 # CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_INT51X1 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
@@ -771,8 +715,7 @@ CONFIG_DEVKMEM=y
 #
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -782,6 +725,11 @@ CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -805,22 +753,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -898,6 +831,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 CONFIG_SND_PPC=y
 CONFIG_SND_PS3=m
@@ -930,29 +868,34 @@ CONFIG_USB_HIDDEV=y
 # Special HID drivers
 #
 # CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
 # CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
 # CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
 # CONFIG_HID_PANTHERLORD is not set
 # CONFIG_HID_PETALYNX is not set
 # CONFIG_HID_SAMSUNG is not set
 CONFIG_HID_SONY=m
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SUNPLUS=m
+# CONFIG_HID_GREENASIA is not set
+CONFIG_HID_SMARTJOYPLUS=m
+# CONFIG_SMARTJOYPLUS_FF is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -988,6 +931,8 @@ CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1115,6 +1060,10 @@ CONFIG_RTC_DRV_PS3=m
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1141,11 +1090,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1205,7 +1155,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1222,6 +1171,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1359,7 +1309,6 @@ CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1374,31 +1323,21 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index bd4a8d435c5..28384dc0100 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:04 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:01 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -101,7 +106,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -114,9 +118,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -129,6 +140,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -141,7 +156,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -222,6 +237,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +258,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -347,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -364,7 +381,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -501,7 +522,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -579,10 +602,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -599,6 +618,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -607,6 +627,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -626,7 +647,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -660,14 +680,17 @@ CONFIG_MD_RAID6_PQ=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -695,8 +718,10 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -845,13 +870,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -879,23 +908,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -937,6 +952,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -946,6 +962,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1064,6 +1082,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1091,6 +1110,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1110,7 +1133,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -1119,6 +1141,8 @@ CONFIG_XFS_FS=m
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1273,6 +1297,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1298,22 +1323,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 2ff798744c1..7685ffde882 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -598,8 +598,6 @@ typedef struct risc_timer_pram {
 #define CICR_IEN		((uint)0x00000080)	/* Int. enable */
 #define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
 
-#define IMAP_ADDR		(get_immrbase())
-
 #define CPM_PIN_INPUT     0
 #define CPM_PIN_OUTPUT    1
 #define CPM_PIN_PRIMARY   0
diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h
index 1e2eb41fa05..52e4d54da2a 100644
--- a/arch/powerpc/include/asm/delay.h
+++ b/arch/powerpc/include/asm/delay.h
@@ -63,6 +63,8 @@ extern void udelay(unsigned long usecs);
 			udelay(delay);                                         \
 		else                                                           \
 			cpu_relax();                                           \
+	if (!__ret)                                                            \
+		__ret = (condition);                                           \
 	__ret;		                                                       \
 })
 
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 3d9e887c3c0..b44aaabdd1a 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -309,7 +309,9 @@ static inline void dma_sync_single_for_cpu(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
+
+	if (dma_ops->sync_single_range_for_cpu)
+		dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
 					   size, direction);
 }
 
@@ -320,7 +322,9 @@ static inline void dma_sync_single_for_device(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_device(dev, dma_handle,
+
+	if (dma_ops->sync_single_range_for_device)
+		dma_ops->sync_single_range_for_device(dev, dma_handle,
 					      0, size, direction);
 }
 
@@ -331,7 +335,9 @@ static inline void dma_sync_sg_for_cpu(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
+
+	if (dma_ops->sync_sg_for_cpu)
+		dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
 }
 
 static inline void dma_sync_sg_for_device(struct device *dev,
@@ -341,7 +347,9 @@ static inline void dma_sync_sg_for_device(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
+
+	if (dma_ops->sync_sg_for_device)
+		dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
 }
 
 static inline void dma_sync_single_range_for_cpu(struct device *dev,
@@ -351,7 +359,9 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_cpu(dev, dma_handle,
+
+	if (dma_ops->sync_single_range_for_cpu)
+		dma_ops->sync_single_range_for_cpu(dev, dma_handle,
 					   offset, size, direction);
 }
 
@@ -362,7 +372,9 @@ static inline void dma_sync_single_range_for_device(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
+
+	if (dma_ops->sync_single_range_for_device)
+		dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
 					      size, direction);
 }
 #else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index 684a73f4324..a74c4ee6c02 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -22,9 +22,7 @@
 
 #ifdef __KERNEL__
 
-#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/highmem.h>
 #include <asm/kmap_types.h>
 #include <asm/tlbflush.h>
 #include <asm/page.h>
@@ -62,6 +60,9 @@ extern pte_t *pkmap_page_table;
 
 extern void *kmap_high(struct page *page);
 extern void kunmap_high(struct page *page);
+extern void *kmap_atomic_prot(struct page *page, enum km_type type,
+			      pgprot_t prot);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
 
 static inline void *kmap(struct page *page)
 {
@@ -79,62 +80,11 @@ static inline void kunmap(struct page *page)
 	kunmap_high(page);
 }
 
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
-{
-	unsigned int idx;
-	unsigned long vaddr;
-
-	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
-	debug_kmap_atomic(type);
-	idx = type + KM_TYPE_NR*smp_processor_id();
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
-	BUG_ON(!pte_none(*(kmap_pte-idx)));
-#endif
-	__set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
-	local_flush_tlb_page(NULL, vaddr);
-
-	return (void*) vaddr;
-}
-
 static inline void *kmap_atomic(struct page *page, enum km_type type)
 {
 	return kmap_atomic_prot(page, type, kmap_prot);
 }
 
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
-#ifdef CONFIG_DEBUG_HIGHMEM
-	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
-	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
-
-	if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
-		pagefault_enable();
-		return;
-	}
-
-	BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-
-	/*
-	 * force other mappings to Oops if they'll try to access
-	 * this pte without first remap it
-	 */
-	pte_clear(&init_mm, vaddr, kmap_pte-idx);
-	local_flush_tlb_page(NULL, vaddr);
-#endif
-	pagefault_enable();
-}
-
 static inline struct page *kmap_atomic_to_page(void *ptr)
 {
 	unsigned long idx, vaddr = (unsigned long) ptr;
@@ -148,6 +98,7 @@ static inline struct page *kmap_atomic_to_page(void *ptr)
 	return pte_page(*pte);
 }
 
+
 #define flush_cache_kmaps()	flush_cache_all()
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 867ab8ed69b..8b505eaaa38 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -68,13 +68,13 @@ static inline int irqs_disabled_flags(unsigned long flags)
 
 #if defined(CONFIG_BOOKE)
 #define SET_MSR_EE(x)	mtmsr(x)
-#define local_irq_restore(flags)	__asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
+#define raw_local_irq_restore(flags)	__asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
 #else
 #define SET_MSR_EE(x)	mtmsr(x)
-#define local_irq_restore(flags)	mtmsr(flags)
+#define raw_local_irq_restore(flags)	mtmsr(flags)
 #endif
 
-static inline void local_irq_disable(void)
+static inline void raw_local_irq_disable(void)
 {
 #ifdef CONFIG_BOOKE
 	__asm__ __volatile__("wrteei 0": : :"memory");
@@ -86,7 +86,7 @@ static inline void local_irq_disable(void)
 #endif
 }
 
-static inline void local_irq_enable(void)
+static inline void raw_local_irq_enable(void)
 {
 #ifdef CONFIG_BOOKE
 	__asm__ __volatile__("wrteei 1": : :"memory");
@@ -98,7 +98,7 @@ static inline void local_irq_enable(void)
 #endif
 }
 
-static inline void local_irq_save_ptr(unsigned long *flags)
+static inline void raw_local_irq_save_ptr(unsigned long *flags)
 {
 	unsigned long msr;
 	msr = mfmsr();
@@ -110,12 +110,12 @@ static inline void local_irq_save_ptr(unsigned long *flags)
 #endif
 }
 
-#define local_save_flags(flags)	((flags) = mfmsr())
-#define local_irq_save(flags)	local_irq_save_ptr(&flags)
-#define irqs_disabled()		((mfmsr() & MSR_EE) == 0)
+#define raw_local_save_flags(flags)	((flags) = mfmsr())
+#define raw_local_irq_save(flags)	raw_local_irq_save_ptr(&flags)
+#define raw_irqs_disabled()		((mfmsr() & MSR_EE) == 0)
+#define raw_irqs_disabled_flags(flags)	(((flags) & MSR_EE) == 0)
 
-#define hard_irq_enable()	local_irq_enable()
-#define hard_irq_disable()	local_irq_disable()
+#define hard_irq_disable()		raw_local_irq_disable()
 
 static inline int irqs_disabled_flags(unsigned long flags)
 {
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index dfdf13c9fef..fddc3ed715f 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -34,7 +34,7 @@
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
 
 /* We don't currently support large pages. */
-#define KVM_PAGES_PER_HPAGE (1<<31)
+#define KVM_PAGES_PER_HPAGE (1UL << 31)
 
 struct kvm;
 struct kvm_run;
diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h
index 8ccd4e15576..0ea0639fcf7 100644
--- a/arch/powerpc/include/asm/perf_counter.h
+++ b/arch/powerpc/include/asm/perf_counter.h
@@ -61,6 +61,8 @@ struct pt_regs;
 extern unsigned long perf_misc_flags(struct pt_regs *regs);
 extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
 
+#define PERF_COUNTER_INDEX_OFFSET	1
+
 /*
  * Only override the default definitions in include/linux/perf_counter.h
  * if we have hardware PMU support.
diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
index 0815eb40aca..c9500d666a1 100644
--- a/arch/powerpc/include/asm/pgalloc-32.h
+++ b/arch/powerpc/include/asm/pgalloc-32.h
@@ -16,7 +16,7 @@ extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
  */
 /* #define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); }) */
 #define pmd_free(mm, x) 		do { } while (0)
-#define __pmd_free_tlb(tlb,x)		do { } while (0)
+#define __pmd_free_tlb(tlb,x,a)		do { } while (0)
 /* #define pgd_populate(mm, pmd, pte)      BUG() */
 
 #ifndef CONFIG_BOOKE
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index afda2bdd860..e6f069c4f71 100644
--- a/arch/powerpc/include/asm/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -118,11 +118,11 @@ static inline void pgtable_free(pgtable_free_t pgf)
 		kmem_cache_free(pgtable_cache[cachenum], p);
 }
 
-#define __pmd_free_tlb(tlb, pmd) 	\
+#define __pmd_free_tlb(tlb, pmd,addr)		      \
 	pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
 		PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
 #ifndef CONFIG_PPC_64K_PAGES
-#define __pud_free_tlb(tlb, pud)	\
+#define __pud_free_tlb(tlb, pud, addr)		      \
 	pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
 		PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
 #endif /* CONFIG_PPC_64K_PAGES */
diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
index 5d8480265a7..1730e5e298d 100644
--- a/arch/powerpc/include/asm/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -38,14 +38,14 @@ static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
 extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
 
 #ifdef CONFIG_SMP
-#define __pte_free_tlb(tlb,ptepage)	\
+#define __pte_free_tlb(tlb,ptepage,address)		\
 do { \
 	pgtable_page_dtor(ptepage); \
 	pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
-		PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
+					PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
 } while (0)
 #else
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, address)	pte_free((tlb)->mm, (pte))
 #endif
 
 
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
index e05d26fa372..82b72207c51 100644
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -47,7 +47,8 @@
  * generic accessors and iterators here
  */
 #define __real_pte(e,p) 	((real_pte_t) { \
-	(e), pte_val(*((p) + PTRS_PER_PTE)) })
+			(e), ((e) & _PAGE_COMBO) ? \
+				(pte_val(*((p) + PTRS_PER_PTE))) : 0 })
 #define __rpte_to_hidx(r,index)	((pte_val((r).pte) & _PAGE_COMBO) ? \
         (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
 #define __rpte_to_pte(r)	((r).pte)
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 01c12339b30..168fce72620 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -58,7 +58,7 @@ struct rtas_t {
 	unsigned long entry;		/* physical address pointer */
 	unsigned long base;		/* physical address pointer */
 	unsigned long size;
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	struct rtas_args args;
 	struct device_node *dev;	/* virtual address pointer */
 };
@@ -245,5 +245,8 @@ static inline u32 rtas_config_addr(int busno, int devfn, int reg)
 			(devfn << 8) | (reg & 0xff);
 }
 
+extern void __cpuinit rtas_give_timebase(void);
+extern void __cpuinit rtas_take_timebase(void);
+
 #endif /* __KERNEL__ */
 #endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 9aba5a38a7c..c8b32925567 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -46,15 +46,13 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #define INIT_THREAD_INFO(tsk)			\
 {						\
 	.task =		&tsk,			\
 	.exec_domain =	&default_exec_domain,	\
 	.cpu =		0,			\
-	.preempt_count = 1,			\
+	.preempt_count = INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 20a60d661ba..ccf129d47d8 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -7,6 +7,7 @@
 
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/lmb.h>
 #include <asm/bug.h>
 #include <asm/abs_addr.h>
 
@@ -90,11 +91,10 @@ static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg,
 static int dma_direct_dma_supported(struct device *dev, u64 mask)
 {
 #ifdef CONFIG_PPC64
-	/* Could be improved to check for memory though it better be
-	 * done via some global so platforms can set the limit in case
+	/* Could be improved so platforms can set the limit in case
 	 * they have limited DMA windows
 	 */
-	return mask >= DMA_BIT_MASK(32);
+	return mask >= (lmb_end_of_DRAM() - 1);
 #else
 	return 1;
 #endif
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4dd38f12915..3cadba60a4b 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -191,11 +191,49 @@ transfer_to_handler_cont:
 	mflr	r9
 	lwz	r11,0(r9)		/* virtual address of handler */
 	lwz	r9,4(r9)		/* where to go when done */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	lis	r12,reenable_mmu@h
+	ori	r12,r12,reenable_mmu@l
+	mtspr	SPRN_SRR0,r12
+	mtspr	SPRN_SRR1,r10
+	SYNC
+	RFI
+reenable_mmu:				/* re-enable mmu so we can */
+	mfmsr	r10
+	lwz	r12,_MSR(r1)
+	xor	r10,r10,r12
+	andi.	r10,r10,MSR_EE		/* Did EE change? */
+	beq	1f
+
+	/* Save handler and return address into the 2 unused words
+	 * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
+	 * else can be recovered from the pt_regs except r3 which for
+	 * normal interrupts has been set to pt_regs and for syscalls
+	 * is an argument, so we temporarily use ORIG_GPR3 to save it
+	 */
+	stw	r9,8(r1)
+	stw	r11,12(r1)
+	stw	r3,ORIG_GPR3(r1)
+	bl	trace_hardirqs_off
+	lwz	r0,GPR0(r1)
+	lwz	r3,ORIG_GPR3(r1)
+	lwz	r4,GPR4(r1)
+	lwz	r5,GPR5(r1)
+	lwz	r6,GPR6(r1)
+	lwz	r7,GPR7(r1)
+	lwz	r8,GPR8(r1)
+	lwz	r9,8(r1)
+	lwz	r11,12(r1)
+1:	mtctr	r11
+	mtlr	r9
+	bctr				/* jump to handler */
+#else /* CONFIG_TRACE_IRQFLAGS */
 	mtspr	SPRN_SRR0,r11
 	mtspr	SPRN_SRR1,r10
 	mtlr	r9
 	SYNC
 	RFI				/* jump to handler, enable MMU */
+#endif /* CONFIG_TRACE_IRQFLAGS */
 
 #if defined (CONFIG_6xx) || defined(CONFIG_E500)
 4:	rlwinm	r12,r12,0,~_TLF_NAPPING
@@ -251,6 +289,31 @@ _GLOBAL(DoSyscall)
 #ifdef SHOW_SYSCALLS
 	bl	do_show_syscall
 #endif /* SHOW_SYSCALLS */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* Return from syscalls can (and generally will) hard enable
+	 * interrupts. You aren't supposed to call a syscall with
+	 * interrupts disabled in the first place. However, to ensure
+	 * that we get it right vs. lockdep if it happens, we force
+	 * that hard enable here with appropriate tracing if we see
+	 * that we have been called with interrupts off
+	 */
+	mfmsr	r11
+	andi.	r12,r11,MSR_EE
+	bne+	1f
+	/* We came in with interrupts disabled, we enable them now */
+	bl	trace_hardirqs_on
+	mfmsr	r11
+	lwz	r0,GPR0(r1)
+	lwz	r3,GPR3(r1)
+	lwz	r4,GPR4(r1)
+	ori	r11,r11,MSR_EE
+	lwz	r5,GPR5(r1)
+	lwz	r6,GPR6(r1)
+	lwz	r7,GPR7(r1)
+	lwz	r8,GPR8(r1)
+	mtmsr	r11
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
 	rlwinm	r10,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
 	lwz	r11,TI_FLAGS(r10)
 	andi.	r11,r11,_TIF_SYSCALL_T_OR_A
@@ -275,6 +338,7 @@ ret_from_syscall:
 	rlwinm	r12,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
 	/* disable interrupts so current_thread_info()->flags can't change */
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
+	/* Note: We don't bother telling lockdep about it */
 	SYNC
 	MTMSRD(r10)
 	lwz	r9,TI_FLAGS(r12)
@@ -288,6 +352,19 @@ ret_from_syscall:
 	oris	r11,r11,0x1000	/* Set SO bit in CR */
 	stw	r11,_CCR(r1)
 syscall_exit_cont:
+	lwz	r8,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* If we are going to return from the syscall with interrupts
+	 * off, we trace that here. It shouldn't happen though but we
+	 * want to catch the bugger if it does right ?
+	 */
+	andi.	r10,r8,MSR_EE
+	bne+	1f
+	stw	r3,GPR3(r1)
+	bl      trace_hardirqs_off
+	lwz	r3,GPR3(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
 	/* If the process has its own DBCR0 value, load it up.  The internal
 	   debug mode bit tells us that dbcr0 should be loaded. */
@@ -311,7 +388,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	mtlr	r4
 	mtcr	r5
 	lwz	r7,_NIP(r1)
-	lwz	r8,_MSR(r1)
 	FIX_SRR1(r8, r0)
 	lwz	r2,GPR2(r1)
 	lwz	r1,GPR1(r1)
@@ -394,7 +470,9 @@ syscall_exit_work:
 	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
 	beq	ret_from_except
 
-	/* Re-enable interrupts */
+	/* Re-enable interrupts. There is no need to trace that with
+	 * lockdep as we are supposed to have IRQs on at this point
+	 */
 	ori	r10,r10,MSR_EE
 	SYNC
 	MTMSRD(r10)
@@ -705,6 +783,7 @@ ret_from_except:
 	/* Hard-disable interrupts so that current_thread_info()->flags
 	 * can't change between when we test it and when we return
 	 * from the interrupt. */
+	/* Note: We don't bother telling lockdep about it */
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
 	SYNC			/* Some chip revs have problems here... */
 	MTMSRD(r10)		/* disable interrupts */
@@ -744,11 +823,24 @@ resume_kernel:
 	beq+	restore
 	andi.	r0,r3,MSR_EE	/* interrupts off? */
 	beq	restore		/* don't schedule if so */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* Lockdep thinks irqs are enabled, we need to call
+	 * preempt_schedule_irq with IRQs off, so we inform lockdep
+	 * now that we -did- turn them off already
+	 */
+	bl	trace_hardirqs_off
+#endif
 1:	bl	preempt_schedule_irq
 	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
 	lwz	r3,TI_FLAGS(r9)
 	andi.	r0,r3,_TIF_NEED_RESCHED
 	bne-	1b
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* And now, to properly rebalance the above, we tell lockdep they
+	 * are being turned back on, which will happen when we return
+	 */
+	bl	trace_hardirqs_on
+#endif
 #else
 resume_kernel:
 #endif /* CONFIG_PREEMPT */
@@ -765,6 +857,28 @@ restore:
 	stw	r6,icache_44x_need_flush@l(r4)
 1:
 #endif  /* CONFIG_44x */
+
+	lwz	r9,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* Lockdep doesn't know about the fact that IRQs are temporarily turned
+	 * off in this assembly code while peeking at TI_FLAGS() and such. However
+	 * we need to inform it if the exception turned interrupts off, and we
+	 * are about to trun them back on.
+	 *
+	 * The problem here sadly is that we don't know whether the exceptions was
+	 * one that turned interrupts off or not. So we always tell lockdep about
+	 * turning them on here when we go back to wherever we came from with EE
+	 * on, even if that may meen some redudant calls being tracked. Maybe later
+	 * we could encode what the exception did somewhere or test the exception
+	 * type in the pt_regs but that sounds overkill
+	 */
+	andi.	r10,r9,MSR_EE
+	beq	1f
+	bl	trace_hardirqs_on
+	lwz	r9,_MSR(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
+
 	lwz	r0,GPR0(r1)
 	lwz	r2,GPR2(r1)
 	REST_4GPRS(3, r1)
@@ -782,7 +896,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	stwcx.	r0,0,r1			/* to clear the reservation */
 
 #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-	lwz	r9,_MSR(r1)
 	andi.	r10,r9,MSR_RI		/* check if this exception occurred */
 	beql	nonrecoverable		/* at a bad place (MSR:RI = 0) */
 
@@ -805,7 +918,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	MTMSRD(r10)		/* clear the RI bit */
 	.globl exc_exit_restart
 exc_exit_restart:
-	lwz	r9,_MSR(r1)
 	lwz	r12,_NIP(r1)
 	FIX_SRR1(r9,r10)
 	mtspr	SPRN_SRR0,r12
@@ -1035,11 +1147,18 @@ do_work:			/* r10 contains MSR_KERNEL here */
 	beq	do_user_signal
 
 do_resched:			/* r10 contains MSR_KERNEL here */
+	/* Note: We don't need to inform lockdep that we are enabling
+	 * interrupts here. As far as it knows, they are already enabled
+	 */
 	ori	r10,r10,MSR_EE
 	SYNC
 	MTMSRD(r10)		/* hard-enable interrupts */
 	bl	schedule
 recheck:
+	/* Note: And we don't tell it we are disabling them again
+	 * neither. Those disable/enable cycles used to peek at
+	 * TI_FLAGS aren't advertised.
+	 */
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
 	SYNC
 	MTMSRD(r10)		/* disable interrupts */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 48469463f89..fc213294275 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -1124,9 +1124,8 @@ mmu_off:
 	RFI
 
 /*
- * Use the first pair of BAT registers to map the 1st 16MB
- * of RAM to PAGE_OFFSET.  From this point on we can't safely
- * call OF any more.
+ * On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET
+ * (we keep one for debugging) and on others, we use one 256M BAT.
  */
 initial_bats:
 	lis	r11,PAGE_OFFSET@h
@@ -1136,12 +1135,16 @@ initial_bats:
 	bne	4f
 	ori	r11,r11,4		/* set up BAT registers for 601 */
 	li	r8,0x7f			/* valid, block length = 8MB */
-	oris	r9,r11,0x800000@h	/* set up BAT reg for 2nd 8M */
-	oris	r10,r8,0x800000@h	/* set up BAT reg for 2nd 8M */
 	mtspr	SPRN_IBAT0U,r11		/* N.B. 601 has valid bit in */
 	mtspr	SPRN_IBAT0L,r8		/* lower BAT register */
-	mtspr	SPRN_IBAT1U,r9
-	mtspr	SPRN_IBAT1L,r10
+	addis	r11,r11,0x800000@h
+	addis	r8,r8,0x800000@h
+	mtspr	SPRN_IBAT1U,r11
+	mtspr	SPRN_IBAT1L,r8
+	addis	r11,r11,0x800000@h
+	addis	r8,r8,0x800000@h
+	mtspr	SPRN_IBAT2U,r11
+	mtspr	SPRN_IBAT2L,r8
 	isync
 	blr
 
diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c
index 75ff47fed7b..cc466d039af 100644
--- a/arch/powerpc/kernel/mpc7450-pmu.c
+++ b/arch/powerpc/kernel/mpc7450-pmu.c
@@ -10,7 +10,6 @@
  */
 #include <linux/string.h>
 #include <linux/perf_counter.h>
-#include <linux/string.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
 
@@ -408,7 +407,8 @@ struct power_pmu mpc7450_pmu = {
 
 static int init_mpc7450_pmu(void)
 {
-	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/7450"))
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+	    strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/7450"))
 		return -ENODEV;
 
 	return register_power_pmu(&mpc7450_pmu);
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index fa983a59c4c..a359cb08e90 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -76,7 +76,7 @@ struct of_device *of_device_alloc(struct device_node *np,
 	dev->dev.archdata.of_node = np;
 
 	if (bus_id)
-		dev_set_name(&dev->dev, bus_id);
+		dev_set_name(&dev->dev, "%s", bus_id);
 	else
 		of_device_make_bus_id(dev);
 
diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
index 809fdf94b95..70e1f57f7dd 100644
--- a/arch/powerpc/kernel/perf_counter.c
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -518,6 +518,8 @@ void hw_perf_disable(void)
 	struct cpu_hw_counters *cpuhw;
 	unsigned long flags;
 
+	if (!ppmu)
+		return;
 	local_irq_save(flags);
 	cpuhw = &__get_cpu_var(cpu_hw_counters);
 
@@ -572,6 +574,8 @@ void hw_perf_enable(void)
 	int n_lim;
 	int idx;
 
+	if (!ppmu)
+		return;
 	local_irq_save(flags);
 	cpuhw = &__get_cpu_var(cpu_hw_counters);
 	if (!cpuhw->disabled) {
@@ -737,6 +741,8 @@ int hw_perf_group_sched_in(struct perf_counter *group_leader,
 	long i, n, n0;
 	struct perf_counter *sub;
 
+	if (!ppmu)
+		return 0;
 	cpuhw = &__get_cpu_var(cpu_hw_counters);
 	n0 = cpuhw->n_counters;
 	n = collect_events(group_leader, ppmu->n_counter - n0,
@@ -1281,6 +1287,8 @@ void hw_perf_counter_setup(int cpu)
 {
 	struct cpu_hw_counters *cpuhw = &per_cpu(cpu_hw_counters, cpu);
 
+	if (!ppmu)
+		return;
 	memset(cpuhw, 0, sizeof(*cpuhw));
 	cpuhw->mmcr[0] = MMCR0_FC;
 }
diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c
index db90b0c5c27..3c90a3d9173 100644
--- a/arch/powerpc/kernel/power4-pmu.c
+++ b/arch/powerpc/kernel/power4-pmu.c
@@ -606,7 +606,8 @@ static struct power_pmu power4_pmu = {
 
 static int init_power4_pmu(void)
 {
-	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4"))
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+	    strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4"))
 		return -ENODEV;
 
 	return register_power_pmu(&power4_pmu);
diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c
index f4adca8e98a..31918af3e35 100644
--- a/arch/powerpc/kernel/power5+-pmu.c
+++ b/arch/powerpc/kernel/power5+-pmu.c
@@ -678,8 +678,9 @@ static struct power_pmu power5p_pmu = {
 
 static int init_power5p_pmu(void)
 {
-	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+")
-	    && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5++"))
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+	    (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+")
+	     && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5++")))
 		return -ENODEV;
 
 	return register_power_pmu(&power5p_pmu);
diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c
index 29b2c6c0e83..867f6f66396 100644
--- a/arch/powerpc/kernel/power5-pmu.c
+++ b/arch/powerpc/kernel/power5-pmu.c
@@ -618,7 +618,8 @@ static struct power_pmu power5_pmu = {
 
 static int init_power5_pmu(void)
 {
-	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5"))
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+	    strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5"))
 		return -ENODEV;
 
 	return register_power_pmu(&power5_pmu);
diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c
index 09ae5bf5bda..fa21890531d 100644
--- a/arch/powerpc/kernel/power6-pmu.c
+++ b/arch/powerpc/kernel/power6-pmu.c
@@ -537,7 +537,8 @@ static struct power_pmu power6_pmu = {
 
 static int init_power6_pmu(void)
 {
-	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6"))
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+	    strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6"))
 		return -ENODEV;
 
 	return register_power_pmu(&power6_pmu);
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index 5d755ef7ac8..018d094d92f 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -317,7 +317,7 @@ static int power7_generic_events[] = {
  */
 static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
-		[C(OP_READ)] = {	0x400f0,	0xc880	},
+		[C(OP_READ)] = {	0xc880,		0x400f0	},
 		[C(OP_WRITE)] = {	0,		0x300f0	},
 		[C(OP_PREFETCH)] = {	0xd8b8,		0	},
 	},
@@ -327,8 +327,8 @@ static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 		[C(OP_PREFETCH)] = {	0x408a,		0	},
 	},
 	[C(LL)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
-		[C(OP_READ)] = {	0x6080,		0x6084	},
-		[C(OP_WRITE)] = {	0x6082,		0x6086	},
+		[C(OP_READ)] = {	0x16080,	0x26080	},
+		[C(OP_WRITE)] = {	0x16082,	0x26082	},
 		[C(OP_PREFETCH)] = {	0,		0	},
 	},
 	[C(DTLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
@@ -358,6 +358,7 @@ static struct power_pmu power7_pmu = {
 	.get_constraint		= power7_get_constraint,
 	.get_alternatives	= power7_get_alternatives,
 	.disable_pmc		= power7_disable_pmc,
+	.flags			= PPMU_ALT_SIPR,
 	.n_generic		= ARRAY_SIZE(power7_generic_events),
 	.generic_events		= power7_generic_events,
 	.cache_events		= &power7_cache_events,
@@ -365,7 +366,8 @@ static struct power_pmu power7_pmu = {
 
 static int init_power7_pmu(void)
 {
-	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7"))
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+	    strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7"))
 		return -ENODEV;
 
 	return register_power_pmu(&power7_pmu);
diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c
index 6637c87fe70..75dccb71a04 100644
--- a/arch/powerpc/kernel/ppc970-pmu.c
+++ b/arch/powerpc/kernel/ppc970-pmu.c
@@ -10,7 +10,6 @@
  */
 #include <linux/string.h>
 #include <linux/perf_counter.h>
-#include <linux/string.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
 
@@ -489,8 +488,9 @@ static struct power_pmu ppc970_pmu = {
 
 static int init_ppc970_pmu(void)
 {
-	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970")
-	    && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970MP"))
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+	    (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970")
+	     && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970MP")))
 		return -ENODEV;
 
 	return register_power_pmu(&ppc970_pmu);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3e7135bbe40..892a9f2e6d7 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -528,7 +528,7 @@ void show_regs(struct pt_regs * regs)
 
 	for (i = 0;  i < 32;  i++) {
 		if ((i % REGS_PER_LINE) == 0)
-			printk("\n" KERN_INFO "GPR%02d: ", i);
+			printk("\nGPR%02d: ", i);
 		printk(REG " ", regs->gpr[i]);
 		if (i == LAST_VOLATILE && !FULL_REGS(regs))
 			break;
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 9fa2c7dcd05..ef149880c14 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -736,15 +736,16 @@ void user_disable_single_step(struct task_struct *task)
 {
 	struct pt_regs *regs = task->thread.regs;
 
-
-#if defined(CONFIG_BOOKE)
-	/* If DAC then do not single step, skip */
-	if (task->thread.dabr)
-		return;
-#endif
-
 	if (regs != NULL) {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
+		/* If DAC don't clear DBCRO_IDM or MSR_DE */
+		if (task->thread.dabr)
+			task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT);
+		else {
+			task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
+			regs->msr &= ~MSR_DE;
+		}
+#elif defined(CONFIG_40x)
 		task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
 		regs->msr &= ~MSR_DE;
 #else
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 297632cba04..8a6daf4129f 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -21,7 +21,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/regset.h>
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index ee4c7609b64..c434823b8c8 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -38,9 +38,10 @@
 #include <asm/syscalls.h>
 #include <asm/smp.h>
 #include <asm/atomic.h>
+#include <asm/time.h>
 
 struct rtas_t rtas = {
-	.lock = SPIN_LOCK_UNLOCKED
+	.lock = __RAW_SPIN_LOCK_UNLOCKED
 };
 EXPORT_SYMBOL(rtas);
 
@@ -67,6 +68,28 @@ unsigned long rtas_rmo_buf;
 void (*rtas_flash_term_hook)(int);
 EXPORT_SYMBOL(rtas_flash_term_hook);
 
+/* RTAS use home made raw locking instead of spin_lock_irqsave
+ * because those can be called from within really nasty contexts
+ * such as having the timebase stopped which would lockup with
+ * normal locks and spinlock debugging enabled
+ */
+static unsigned long lock_rtas(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	preempt_disable();
+	__raw_spin_lock_flags(&rtas.lock, flags);
+	return flags;
+}
+
+static void unlock_rtas(unsigned long flags)
+{
+	__raw_spin_unlock(&rtas.lock);
+	local_irq_restore(flags);
+	preempt_enable();
+}
+
 /*
  * call_rtas_display_status and call_rtas_display_status_delay
  * are designed only for very early low-level debugging, which
@@ -79,7 +102,7 @@ static void call_rtas_display_status(char c)
 
 	if (!rtas.base)
 		return;
-	spin_lock_irqsave(&rtas.lock, s);
+	s = lock_rtas();
 
 	args->token = 10;
 	args->nargs = 1;
@@ -89,7 +112,7 @@ static void call_rtas_display_status(char c)
 
 	enter_rtas(__pa(args));
 
-	spin_unlock_irqrestore(&rtas.lock, s);
+	unlock_rtas(s);
 }
 
 static void call_rtas_display_status_delay(char c)
@@ -411,8 +434,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 	if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE)
 		return -1;
 
-	/* Gotta do something different here, use global lock for now... */
-	spin_lock_irqsave(&rtas.lock, s);
+	s = lock_rtas();
 	rtas_args = &rtas.args;
 
 	rtas_args->token = token;
@@ -439,8 +461,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 			outputs[i] = rtas_args->rets[i+1];
 	ret = (nret > 0)? rtas_args->rets[0]: 0;
 
-	/* Gotta do something different here, use global lock for now... */
-	spin_unlock_irqrestore(&rtas.lock, s);
+	unlock_rtas(s);
 
 	if (buff_copy) {
 		log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
@@ -837,7 +858,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 
 	buff_copy = get_errorlog_buffer();
 
-	spin_lock_irqsave(&rtas.lock, flags);
+	flags = lock_rtas();
 
 	rtas.args = args;
 	enter_rtas(__pa(&rtas.args));
@@ -848,7 +869,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 	if (args.rets[0] == -1)
 		errbuf = __fetch_rtas_last_error(buff_copy);
 
-	spin_unlock_irqrestore(&rtas.lock, flags);
+	unlock_rtas(flags);
 
 	if (buff_copy) {
 		if (errbuf)
@@ -951,3 +972,33 @@ int __init early_init_dt_scan_rtas(unsigned long node,
 	/* break now */
 	return 1;
 }
+
+static raw_spinlock_t timebase_lock;
+static u64 timebase = 0;
+
+void __cpuinit rtas_give_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	hard_irq_disable();
+	__raw_spin_lock(&timebase_lock);
+	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
+	timebase = get_tb();
+	__raw_spin_unlock(&timebase_lock);
+
+	while (timebase)
+		barrier();
+	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
+	local_irq_restore(flags);
+}
+
+void __cpuinit rtas_take_timebase(void)
+{
+	while (!timebase)
+		barrier();
+	__raw_spin_lock(&timebase_lock);
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	timebase = 0;
+	__raw_spin_unlock(&timebase_lock);
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 1d154248cf4..e1e3059cf34 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -119,6 +119,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
  */
 notrace void __init machine_init(unsigned long dt_ptr)
 {
+	lockdep_init();
+
 	/* Enable early debugging if any specified (see udbg.h) */
 	udbg_early_init();
 
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 65484b2200b..0b47de07302 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -68,7 +68,8 @@ EXPORT_PER_CPU_SYMBOL(cpu_core_map);
 /* SMP operations for this machine */
 struct smp_ops_t *smp_ops;
 
-static volatile unsigned int cpu_callin_map[NR_CPUS];
+/* Can't be static due to PowerMac hackery */
+volatile unsigned int cpu_callin_map[NR_CPUS];
 
 int smt_enabled_at_boot = 1;
 
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 0362a891e54..acb74a17bbb 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -219,7 +219,7 @@ void udbg_init_pas_realmode(void)
 #ifdef CONFIG_PPC_EARLY_DEBUG_44x
 #include <platforms/44x/44x.h>
 
-static int udbg_44x_as1_flush(void)
+static void udbg_44x_as1_flush(void)
 {
 	if (udbg_comport) {
 		while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index ef36cbbc588..ea4d64644d0 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -80,10 +80,10 @@ _GLOBAL(load_up_altivec)
 	mtvscr	vr0
 	REST_32VRS(0,r4,r5)
 #ifndef CONFIG_SMP
-	/* Update last_task_used_math to 'current' */
+	/* Update last_task_used_altivec to 'current' */
 	subi	r4,r5,THREAD		/* Back to 'current' */
 	fromreal(r4)
-	PPC_STL	r4,ADDROFF(last_task_used_math)(r3)
+	PPC_STL	r4,ADDROFF(last_task_used_altivec)(r3)
 #endif /* CONFIG_SMP */
 	/* restore registers and return */
 	blr
@@ -172,7 +172,7 @@ _GLOBAL(load_up_vsx)
 	oris	r12,r12,MSR_VSX@h
 	std	r12,_MSR(r1)
 #ifndef CONFIG_SMP
-	/* Update last_task_used_math to 'current' */
+	/* Update last_task_used_vsx to 'current' */
 	ld	r4,PACACURRENT(r13)
 	std	r4,0(r3)
 #endif /* CONFIG_SMP */
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 2d2192e48de..3e68363405b 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_PPC_MM_SLICES)	+= slice.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_PPC_SUBPAGE_PROT)	+= subpage-prot.o
 obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
+obj-$(CONFIG_HIGHMEM)		+= highmem.o
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index bc400c78c97..bc122a120bf 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -159,7 +159,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 	int psize;
 #endif
 
-	pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+	pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
 
 	start &= PAGE_MASK;
 	addr = start;
@@ -170,7 +170,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 					start, len)))
 		goto slow_irqon;
 
-	pr_debug("  aligned: %lx .. %lx\n", start, end);
+	pr_devel("  aligned: %lx .. %lx\n", start, end);
 
 #ifdef CONFIG_HUGETLB_PAGE
 	/* We bail out on slice boundary crossing when hugetlb is
@@ -234,7 +234,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 		do {
 			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
 			ptep = huge_pte_offset(mm, a);
-			pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+			pr_devel(" %016lx: huge ptep %p\n", a, ptep);
 			if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
 						   &nr))
 				goto slow;
@@ -249,7 +249,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 #ifdef CONFIG_PPC64
 			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
 #endif
-			pr_debug("  %016lx: normal pgd %p\n", addr,
+			pr_devel("  %016lx: normal pgd %p\n", addr,
 				 (void *)pgd_val(pgd));
 			next = pgd_addr_end(addr, end);
 			if (pgd_none(pgd))
@@ -269,7 +269,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 slow:
 		local_irq_enable();
 slow_irqon:
-		pr_debug("  slow path ! nr = %d\n", nr);
+		pr_devel("  slow path ! nr = %d\n", nr);
 
 		/* Try to get the remaining pages with get_user_pages */
 		start += nr << PAGE_SHIFT;
diff --git a/arch/powerpc/mm/highmem.c b/arch/powerpc/mm/highmem.c
new file mode 100644
index 00000000000..c2186c74c85
--- /dev/null
+++ b/arch/powerpc/mm/highmem.c
@@ -0,0 +1,77 @@
+/*
+ * highmem.c: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ *
+ * Reworked for PowerPC by various contributors. Moved from
+ * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp.
+ */
+
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+	unsigned int idx;
+	unsigned long vaddr;
+
+	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+	pagefault_disable();
+	if (!PageHighMem(page))
+		return page_address(page);
+
+	debug_kmap_atomic(type);
+	idx = type + KM_TYPE_NR*smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	BUG_ON(!pte_none(*(kmap_pte-idx)));
+#endif
+	__set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
+	local_flush_tlb_page(NULL, vaddr);
+
+	return (void*) vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic_prot);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+	if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
+		pagefault_enable();
+		return;
+	}
+
+	BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+
+	/*
+	 * force other mappings to Oops if they'll try to access
+	 * this pte without first remap it
+	 */
+	pte_clear(&init_mm, vaddr, kmap_pte-idx);
+	local_flush_tlb_page(NULL, vaddr);
+#endif
+	pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 9920d6a7cf2..c46ef2ffa3d 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -305,7 +305,7 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 
 	pmd = pmd_offset(pud, start);
 	pud_clear(pud);
-	pmd_free_tlb(tlb, pmd);
+	pmd_free_tlb(tlb, pmd, start);
 }
 
 static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
@@ -348,7 +348,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 
 	pud = pud_offset(pgd, start);
 	pgd_clear(pgd);
-	pud_free_tlb(tlb, pud);
+	pud_free_tlb(tlb, pud, start);
 }
 
 /*
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 8343986809c..b1a727def15 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -89,7 +89,7 @@ static unsigned int steal_context_smp(unsigned int id)
 				id = first_context;
 			continue;
 		}
-		pr_debug("[%d] steal context %d from mm @%p\n",
+		pr_devel("[%d] steal context %d from mm @%p\n",
 			 smp_processor_id(), id, mm);
 
 		/* Mark this mm has having no context anymore */
@@ -126,7 +126,7 @@ static unsigned int steal_context_up(unsigned int id)
 	/* Pick up the victim mm */
 	mm = context_mm[id];
 
-	pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm);
+	pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm);
 
 	/* Flush the TLB for that context */
 	local_flush_tlb_mm(mm);
@@ -180,7 +180,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	spin_lock(&context_lock);
 
 #ifndef DEBUG_STEAL_ONLY
-	pr_debug("[%d] activating context for mm @%p, active=%d, id=%d\n",
+	pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n",
 		 cpu, next, next->context.active, next->context.id);
 #endif
 
@@ -189,7 +189,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	next->context.active++;
 	if (prev) {
 #ifndef DEBUG_STEAL_ONLY
-		pr_debug(" old context %p active was: %d\n",
+		pr_devel(" old context %p active was: %d\n",
 			 prev, prev->context.active);
 #endif
 		WARN_ON(prev->context.active < 1);
@@ -217,6 +217,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 			id = steal_context_smp(id);
 			if (id == MMU_NO_CONTEXT)
 				goto again;
+			goto stolen;
 		}
 #endif /* CONFIG_SMP */
 		id = steal_context_up(id);
@@ -236,7 +237,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	next->context.id = id;
 
 #ifndef DEBUG_STEAL_ONLY
-	pr_debug("[%d] picked up new id %d, nrf is now %d\n",
+	pr_devel("[%d] picked up new id %d, nrf is now %d\n",
 		 cpu, id, nr_free_contexts);
 #endif
 
@@ -247,7 +248,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	 * local TLB for it and unmark it before we use it
 	 */
 	if (test_bit(id, stale_map[cpu])) {
-		pr_debug("[%d] flushing stale context %d for mm @%p !\n",
+		pr_devel("[%d] flushing stale context %d for mm @%p !\n",
 			 cpu, id, next);
 		local_flush_tlb_mm(next);
 
@@ -314,13 +315,13 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
-		pr_debug("MMU: Allocating stale context map for CPU %d\n", cpu);
+		pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu);
 		stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL);
 		break;
 #ifdef CONFIG_HOTPLUG_CPU
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
-		pr_debug("MMU: Freeing stale context map for CPU %d\n", cpu);
+		pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
 		kfree(stale_map[cpu]);
 		stale_map[cpu] = NULL;
 		break;
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index ae1d67cc090..627767d6169 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -129,12 +129,12 @@ static pte_t do_dcache_icache_coherency(pte_t pte)
 	page = pfn_to_page(pfn);
 
 	if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) {
-		pr_debug("do_dcache_icache_coherency... flushing\n");
+		pr_devel("do_dcache_icache_coherency... flushing\n");
 		flush_dcache_icache_page(page);
 		set_bit(PG_arch_1, &page->flags);
 	}
 	else
-		pr_debug("do_dcache_icache_coherency... already clean\n");
+		pr_devel("do_dcache_icache_coherency... already clean\n");
 	return __pte(pte_val(pte) | _PAGE_HWEXEC);
 }
 
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 3b52c80e5e3..5b7038f248b 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -14,8 +14,6 @@
  *      2 of the License, or (at your option) any later version.
  */
 
-#undef DEBUG
-
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
 #include <asm/mmu_context.h>
@@ -27,11 +25,6 @@
 #include <linux/compiler.h>
 #include <asm/udbg.h>
 
-#ifdef DEBUG
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG pr_debug
-#endif
 
 extern void slb_allocate_realmode(unsigned long ea);
 extern void slb_allocate_user(unsigned long ea);
@@ -285,13 +278,13 @@ void slb_initialize(void)
 		patch_slb_encoding(slb_compare_rr_to_size,
 				   mmu_slb_size);
 
-		DBG("SLB: linear  LLP = %04lx\n", linear_llp);
-		DBG("SLB: io      LLP = %04lx\n", io_llp);
+		pr_devel("SLB: linear  LLP = %04lx\n", linear_llp);
+		pr_devel("SLB: io      LLP = %04lx\n", io_llp);
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 		patch_slb_encoding(slb_miss_kernel_load_vmemmap,
 				   SLB_VSID_KERNEL | vmemmap_llp);
-		DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
+		pr_devel("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
 #endif
 	}
 
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 1be1b5e5979..937eb90677d 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -72,7 +72,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 	 */
 	if (huge) {
 #ifdef CONFIG_HUGETLB_PAGE
-		psize = get_slice_psize(mm, addr);;
+		psize = get_slice_psize(mm, addr);
 #else
 		BUG();
 		psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index 258fa4411e9..c591339daf5 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -185,7 +185,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 			goto fail;
 
 		if (shdr_str.sh_type != SHT_STRTAB)
-			goto fail;;
+			goto fail;
 
 		for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
 			if (copy_from_user(&sym, spu_elf_start +
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 42e09a9f77e..e5c1b096c3e 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/of_gpio.h>
+#include <linux/of_i2c.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -63,9 +64,6 @@ define_machine(warp) {
 };
 
 
-static u32 post_info;
-
-/* I am not sure this is the best place for this... */
 static int __init warp_post_info(void)
 {
 	struct device_node *np;
@@ -87,10 +85,9 @@ static int __init warp_post_info(void)
 
 	iounmap(fpga);
 
-	if (post1 || post2) {
+	if (post1 || post2)
 		printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
-		post_info = 1;
-	} else
+	else
 		printk(KERN_INFO "Warp POST OK\n");
 
 	return 0;
@@ -166,6 +163,9 @@ static irqreturn_t temp_isr(int irq, void *context)
 		value ^= 1;
 		mdelay(500);
 	}
+
+	/* Not reached */
+	return IRQ_HANDLED;
 }
 
 static int pika_setup_leds(void)
@@ -179,24 +179,19 @@ static int pika_setup_leds(void)
 	}
 
 	for_each_child_of_node(np, child)
-		if (strcmp(child->name, "green") == 0) {
+		if (strcmp(child->name, "green") == 0)
 			green_led = of_get_gpio(child, 0);
-			/* Turn back on the green LED */
-			gpio_set_value(green_led, 1);
-		} else if (strcmp(child->name, "red") == 0) {
+		else if (strcmp(child->name, "red") == 0)
 			red_led = of_get_gpio(child, 0);
-			/* Set based on post */
-			gpio_set_value(red_led, post_info);
-		}
 
 	of_node_put(np);
 
 	return 0;
 }
 
-static void pika_setup_critical_temp(struct i2c_client *client)
+static void pika_setup_critical_temp(struct device_node *np,
+				     struct i2c_client *client)
 {
-	struct device_node *np;
 	int irq, rc;
 
 	/* Do this before enabling critical temp interrupt since we
@@ -208,14 +203,7 @@ static void pika_setup_critical_temp(struct i2c_client *client)
 	i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
 	i2c_smbus_write_byte_data(client, 3,  0); /* Tlow */
 
-	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
-	if (np == NULL) {
-		printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
-		return;
-	}
-
 	irq = irq_of_parse_and_map(np, 0);
-	of_node_put(np);
 	if (irq  == NO_IRQ) {
 		printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
 		return;
@@ -244,32 +232,24 @@ static inline void pika_dtm_check_fan(void __iomem *fpga)
 
 static int pika_dtm_thread(void __iomem *fpga)
 {
-	struct i2c_adapter *adap;
+	struct device_node *np;
 	struct i2c_client *client;
 
-	/* We loop in case either driver was compiled as a module and
-	 * has not been insmoded yet.
-	 */
-	while (!(adap = i2c_get_adapter(0))) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(HZ);
-	}
-
-	while (1) {
-		list_for_each_entry(client, &adap->clients, list)
-			if (client->addr == 0x4a)
-				goto found_it;
+	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+	if (np == NULL)
+		return -ENOENT;
 
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(HZ);
+	client = of_find_i2c_device_by_node(np);
+	if (client == NULL) {
+		of_node_put(np);
+		return -ENOENT;
 	}
 
-found_it:
-	pika_setup_critical_temp(client);
+	pika_setup_critical_temp(np, client);
 
-	i2c_put_adapter(adap);
+	of_node_put(np);
 
-	printk(KERN_INFO "PIKA DTM thread running.\n");
+	printk(KERN_INFO "Warp DTM thread running.\n");
 
 	while (!kthread_should_stop()) {
 		int val;
@@ -291,7 +271,6 @@ found_it:
 	return 0;
 }
 
-
 static int __init pika_dtm_start(void)
 {
 	struct task_struct *dtm_thread;
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index ddf0bdc0fc8..7ee979f323d 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -147,7 +147,7 @@ int __init pq2ads_pci_init_irq(void)
 		goto out;
 	}
 
-	priv = alloc_bootmem(sizeof(struct pq2ads_pci_pic));
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv) {
 		of_node_put(np);
 		ret = -ENOMEM;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 77f90b35635..bfb32834ab0 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -233,6 +233,19 @@ static void __init mpc85xx_mds_setup_arch(void)
 			/* Turn UCC1 & UCC2 on */
 			setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
 			setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+		} else if (machine_is(mpc8569_mds)) {
+#define BCSR7_UCC12_GETHnRST	(0x1 << 2)
+#define BCSR8_UEM_MARVELL_RST	(0x1 << 1)
+			/*
+			 * U-Boot mangles interrupt polarity for Marvell PHYs,
+			 * so reset built-in and UEM Marvell PHYs, this puts
+			 * the PHYs into their normal state.
+			 */
+			clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+			setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
+
+			setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+			clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
 		}
 		iounmap(bcsr_regs);
 	}
@@ -285,6 +298,7 @@ static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,rapidio-delta", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index cc0b0db8a6f..62c592ede64 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -52,20 +52,19 @@ smp_85xx_kick_cpu(int nr)
 
 	pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
 
-	local_irq_save(flags);
-
 	np = of_get_cpu_node(nr, NULL);
 	cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);
 
 	if (cpu_rel_addr == NULL) {
 		printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
-		local_irq_restore(flags);
 		return;
 	}
 
 	/* Map the spin table */
 	bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
 
+	local_irq_save(flags);
+
 	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
 	out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
 
@@ -73,10 +72,10 @@ smp_85xx_kick_cpu(int nr)
 	while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
 		mdelay(1);
 
-	iounmap(bptr_vaddr);
-
 	local_irq_restore(flags);
 
+	iounmap(bptr_vaddr);
+
 	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
 }
 
diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
index d0e8443b12c..747d8fb3ab8 100644
--- a/arch/powerpc/platforms/85xx/socrates.c
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -102,10 +102,11 @@ static struct of_device_id __initdata socrates_of_bus_ids[] = {
 	{},
 };
 
-static void __init socrates_init(void)
+static int __init socrates_publish_devices(void)
 {
-	of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
+	return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
 }
+machine_device_initcall(socrates, socrates_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -124,7 +125,6 @@ define_machine(socrates) {
 	.name			= "Socrates",
 	.probe			= socrates_probe,
 	.setup_arch		= socrates_setup_arch,
-	.init			= socrates_init,
 	.init_IRQ		= socrates_pic_init,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index ee01532786e..1b426050a2f 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -32,7 +32,6 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
-#include <linux/of_platform.h>
 
 /* A few bit definitions needed for fixups on some boards */
 #define MPC85xx_L2CTL_L2E		0x80000000 /* L2 enable */
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index c71498dbf21..aca5741ddc6 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -85,7 +85,7 @@ static inline void axon_msi_debug_setup(struct device_node *dn,
 
 static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val)
 {
-	pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
+	pr_devel("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
 
 	dcr_write(msic->dcr_host, dcr_n, val);
 }
@@ -98,7 +98,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 	int retry = 0;
 
 	write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG);
-	pr_debug("axon_msi: original write_offset 0x%x\n", write_offset);
+	pr_devel("axon_msi: original write_offset 0x%x\n", write_offset);
 
 	/* write_offset doesn't wrap properly, so we have to mask it */
 	write_offset &= MSIC_FIFO_SIZE_MASK;
@@ -108,7 +108,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 		msi  = le32_to_cpu(msic->fifo_virt[idx]);
 		msi &= 0xFFFF;
 
-		pr_debug("axon_msi: woff %x roff %x msi %x\n",
+		pr_devel("axon_msi: woff %x roff %x msi %x\n",
 			  write_offset, msic->read_offset, msi);
 
 		if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
@@ -123,12 +123,12 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 			 */
 			udelay(1);
 			retry++;
-			pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+			pr_devel("axon_msi: invalid irq 0x%x!\n", msi);
 			continue;
 		}
 
 		if (retry) {
-			pr_debug("axon_msi: late irq 0x%x, retry %d\n",
+			pr_devel("axon_msi: late irq 0x%x, retry %d\n",
 				 msi, retry);
 			retry = 0;
 		}
@@ -332,7 +332,7 @@ static int axon_msi_shutdown(struct of_device *device)
 	struct axon_msic *msic = dev_get_drvdata(&device->dev);
 	u32 tmp;
 
-	pr_debug("axon_msi: disabling %s\n",
+	pr_devel("axon_msi: disabling %s\n",
 		  msic->irq_host->of_node->full_name);
 	tmp  = dcr_read(msic->dcr_host, MSIC_CTRL_REG);
 	tmp &= ~MSIC_CTRL_ENABLE & ~MSIC_CTRL_IRQ_ENABLE;
@@ -349,7 +349,7 @@ static int axon_msi_probe(struct of_device *device,
 	unsigned int virq;
 	int dcr_base, dcr_len;
 
-	pr_debug("axon_msi: setting up dn %s\n", dn->full_name);
+	pr_devel("axon_msi: setting up dn %s\n", dn->full_name);
 
 	msic = kzalloc(sizeof(struct axon_msic), GFP_KERNEL);
 	if (!msic) {
@@ -403,7 +403,7 @@ static int axon_msi_probe(struct of_device *device,
 
 	set_irq_data(virq, msic);
 	set_irq_chained_handler(virq, axon_msi_cascade);
-	pr_debug("axon_msi: irq 0x%x setup for axon_msi\n", virq);
+	pr_devel("axon_msi: irq 0x%x setup for axon_msi\n", virq);
 
 	/* Enable the MSIC hardware */
 	msic_dcr_write(msic, MSIC_BASE_ADDR_HI_REG, msic->fifo_phys >> 32);
@@ -484,13 +484,13 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic)
 
 	addr = of_translate_address(dn, of_get_property(dn, "reg", NULL));
 	if (addr == OF_BAD_ADDR) {
-		pr_debug("axon_msi: couldn't translate reg property\n");
+		pr_devel("axon_msi: couldn't translate reg property\n");
 		return;
 	}
 
 	msic->trigger = ioremap(addr, 0x4);
 	if (!msic->trigger) {
-		pr_debug("axon_msi: ioremap failed\n");
+		pr_devel("axon_msi: ioremap failed\n");
 		return;
 	}
 
@@ -498,7 +498,7 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic)
 
 	if (!debugfs_create_file(name, 0600, powerpc_debugfs_root,
 				 msic, &fops_msic)) {
-		pr_debug("axon_msi: debugfs_create_file failed!\n");
+		pr_devel("axon_msi: debugfs_create_file failed!\n");
 		return;
 	}
 }
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 9046803c827..bc97fada48c 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -36,7 +36,6 @@
 #include <asm/prom.h>
 #include <asm/smp.h>
 #include <asm/paca.h>
-#include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/firmware.h>
@@ -140,31 +139,6 @@ static void __devinit smp_cell_setup_cpu(int cpu)
 	mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
 }
 
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit cell_give_timebase(void)
-{
-	spin_lock(&timebase_lock);
-	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
-	timebase = get_tb();
-	spin_unlock(&timebase_lock);
-
-	while (timebase)
-		barrier();
-	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit cell_take_timebase(void)
-{
-	while (!timebase)
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase >> 32, timebase & 0xffffffff);
-	timebase = 0;
-	spin_unlock(&timebase_lock);
-}
-
 static void __devinit smp_cell_kick_cpu(int nr)
 {
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -224,8 +198,8 @@ void __init smp_init_cell(void)
 
 	/* Non-lpar has additional take/give timebase */
 	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
-		smp_ops->give_timebase = cell_give_timebase;
-		smp_ops->take_timebase = cell_take_timebase;
+		smp_ops->give_timebase = rtas_give_timebase;
+		smp_ops->take_timebase = rtas_take_timebase;
 	}
 
 	DBG(" <- smp_init_cell()\n");
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index 10a4a4d063b..02cafecc90e 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -26,7 +26,6 @@
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/smp.h>
-#include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/mpic.h>
 #include <asm/rtas.h>
@@ -42,40 +41,12 @@ static void __devinit smp_chrp_setup_cpu(int cpu_nr)
 	mpic_setup_this_cpu();
 }
 
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned int timebase_upper = 0, timebase_lower = 0;
-
-void __devinit smp_chrp_give_timebase(void)
-{
-	spin_lock(&timebase_lock);
-	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
-	timebase_upper = get_tbu();
-	timebase_lower = get_tbl();
-	spin_unlock(&timebase_lock);
-
-	while (timebase_upper || timebase_lower)
-		barrier();
-	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-void __devinit smp_chrp_take_timebase(void)
-{
-	while (!(timebase_upper || timebase_lower))
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase_upper, timebase_lower);
-	timebase_upper = 0;
-	timebase_lower = 0;
-	spin_unlock(&timebase_lock);
-	printk("CPU %i taken timebase\n", smp_processor_id());
-}
-
 /* CHRP with openpic */
 struct smp_ops_t chrp_smp_ops = {
 	.message_pass = smp_mpic_message_pass,
 	.probe = smp_mpic_probe,
 	.kick_cpu = smp_chrp_kick_cpu,
 	.setup_cpu = smp_chrp_setup_cpu,
-	.give_timebase = smp_chrp_give_timebase,
-	.take_timebase = smp_chrp_take_timebase,
+	.give_timebase = rtas_give_timebase,
+	.take_timebase = rtas_take_timebase,
 };
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 153051eb6d9..a4619347aa7 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -71,20 +71,25 @@ static void pas_restart(char *cmd)
 }
 
 #ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(timebase_lock);
+static raw_spinlock_t timebase_lock;
 static unsigned long timebase;
 
 static void __devinit pas_give_timebase(void)
 {
-	spin_lock(&timebase_lock);
+	unsigned long flags;
+
+	local_irq_save(flags);
+	hard_irq_disable();
+	__raw_spin_lock(&timebase_lock);
 	mtspr(SPRN_TBCTL, TBCTL_FREEZE);
 	isync();
 	timebase = get_tb();
-	spin_unlock(&timebase_lock);
+	__raw_spin_unlock(&timebase_lock);
 
 	while (timebase)
 		barrier();
 	mtspr(SPRN_TBCTL, TBCTL_RESTART);
+	local_irq_restore(flags);
 }
 
 static void __devinit pas_take_timebase(void)
@@ -92,10 +97,10 @@ static void __devinit pas_take_timebase(void)
 	while (!timebase)
 		smp_rmb();
 
-	spin_lock(&timebase_lock);
+	__raw_spin_lock(&timebase_lock);
 	set_tb(timebase >> 32, timebase & 0xffffffff);
 	timebase = 0;
-	spin_unlock(&timebase_lock);
+	__raw_spin_unlock(&timebase_lock);
 }
 
 struct smp_ops_t pas_smp_ops = {
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 22ecfbe7183..708c7513337 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -251,7 +251,7 @@ static void g5_pfunc_switch_volt(int speed_mode)
 static struct pmf_function *pfunc_cpu_setfreq_high;
 static struct pmf_function *pfunc_cpu_setfreq_low;
 static struct pmf_function *pfunc_cpu_getfreq;
-static struct pmf_function *pfunc_slewing_done;;
+static struct pmf_function *pfunc_slewing_done;
 
 static int g5_pfunc_switch_freq(int speed_mode)
 {
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index dce73634910..d212006a5b3 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -609,7 +609,7 @@ static int pmacpic_find_viaint(void)
 	np = of_find_node_by_name(NULL, "via-pmu");
 	if (np == NULL)
 		goto not_found;
-	viaint = irq_of_parse_and_map(np, 0);;
+	viaint = irq_of_parse_and_map(np, 0);
 
 not_found:
 #endif /* CONFIG_ADB_PMU */
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 86f69a4eb49..c2052265636 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -103,11 +103,6 @@ unsigned long smu_cmdbuf_abs;
 EXPORT_SYMBOL(smu_cmdbuf_abs);
 #endif
 
-#ifdef CONFIG_SMP
-extern struct smp_ops_t psurge_smp_ops;
-extern struct smp_ops_t core99_smp_ops;
-#endif /* CONFIG_SMP */
-
 static void pmac_show_cpuinfo(struct seq_file *m)
 {
 	struct device_node *np;
@@ -341,34 +336,6 @@ static void __init pmac_setup_arch(void)
 		ROOT_DEV = DEFAULT_ROOT_DEVICE;
 #endif
 
-#ifdef CONFIG_SMP
-	/* Check for Core99 */
-	ic = of_find_node_by_name(NULL, "uni-n");
-	if (!ic)
-		ic = of_find_node_by_name(NULL, "u3");
-	if (!ic)
-		ic = of_find_node_by_name(NULL, "u4");
-	if (ic) {
-		of_node_put(ic);
-		smp_ops = &core99_smp_ops;
-	}
-#ifdef CONFIG_PPC32
-	else {
-		/*
-		 * We have to set bits in cpu_possible_map here since the
-		 * secondary CPU(s) aren't in the device tree, and
-		 * setup_per_cpu_areas only allocates per-cpu data for
-		 * CPUs in the cpu_possible_map.
-		 */
-		int cpu;
-
-		for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
-			cpu_set(cpu, cpu_possible_map);
-		smp_ops = &psurge_smp_ops;
-	}
-#endif
-#endif /* CONFIG_SMP */
-
 #ifdef CONFIG_ADB
 	if (strstr(cmd_line, "adb_sync")) {
 		extern int __adb_probe_sync;
@@ -512,6 +479,14 @@ static void __init pmac_init_early(void)
 #ifdef CONFIG_PPC64
 	iommu_init_early_dart();
 #endif
+
+	/* SMP Init has to be done early as we need to patch up
+	 * cpu_possible_map before interrupt stacks are allocated
+	 * or kaboom...
+	 */
+#ifdef CONFIG_SMP
+	pmac_setup_smp();
+#endif
 }
 
 static int __init pmac_declare_of_platform_devices(void)
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index cf1dbe75889..6d4da7b46b4 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -64,10 +64,11 @@
 extern void __secondary_start_pmac_0(void);
 extern int pmac_pfunc_base_install(void);
 
-#ifdef CONFIG_PPC32
+static void (*pmac_tb_freeze)(int freeze);
+static u64 timebase;
+static int tb_req;
 
-/* Sync flag for HW tb sync */
-static volatile int sec_tb_reset = 0;
+#ifdef CONFIG_PPC32
 
 /*
  * Powersurge (old powermac SMP) support.
@@ -294,6 +295,9 @@ static int __init smp_psurge_probe(void)
 		psurge_quad_init();
 		/* All released cards using this HW design have 4 CPUs */
 		ncpus = 4;
+		/* No sure how timebase sync works on those, let's use SW */
+		smp_ops->give_timebase = smp_generic_give_timebase;
+		smp_ops->take_timebase = smp_generic_take_timebase;
 	} else {
 		iounmap(quad_base);
 		if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
@@ -308,18 +312,15 @@ static int __init smp_psurge_probe(void)
 	psurge_start = ioremap(PSURGE_START, 4);
 	psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
 
-	/*
-	 * This is necessary because OF doesn't know about the
+	/* This is necessary because OF doesn't know about the
 	 * secondary cpu(s), and thus there aren't nodes in the
 	 * device tree for them, and smp_setup_cpu_maps hasn't
-	 * set their bits in cpu_possible_map and cpu_present_map.
+	 * set their bits in cpu_present_map.
 	 */
 	if (ncpus > NR_CPUS)
 		ncpus = NR_CPUS;
-	for (i = 1; i < ncpus ; ++i) {
+	for (i = 1; i < ncpus ; ++i)
 		cpu_set(i, cpu_present_map);
-		set_hard_smp_processor_id(i, i);
-	}
 
 	if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
 
@@ -329,8 +330,14 @@ static int __init smp_psurge_probe(void)
 static void __init smp_psurge_kick_cpu(int nr)
 {
 	unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
-	unsigned long a;
-	int i;
+	unsigned long a, flags;
+	int i, j;
+
+	/* Defining this here is evil ... but I prefer hiding that
+	 * crap to avoid giving people ideas that they can do the
+	 * same.
+	 */
+	extern volatile unsigned int cpu_callin_map[NR_CPUS];
 
 	/* may need to flush here if secondary bats aren't setup */
 	for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
@@ -339,47 +346,52 @@ static void __init smp_psurge_kick_cpu(int nr)
 
 	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
 
+	/* This is going to freeze the timeebase, we disable interrupts */
+	local_irq_save(flags);
+
 	out_be32(psurge_start, start);
 	mb();
 
 	psurge_set_ipi(nr);
+
 	/*
 	 * We can't use udelay here because the timebase is now frozen.
 	 */
 	for (i = 0; i < 2000; ++i)
-		barrier();
+		asm volatile("nop" : : : "memory");
 	psurge_clr_ipi(nr);
 
-	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
-}
-
-/*
- * With the dual-cpu powersurge board, the decrementers and timebases
- * of both cpus are frozen after the secondary cpu is started up,
- * until we give the secondary cpu another interrupt.  This routine
- * uses this to get the timebases synchronized.
- *  -- paulus.
- */
-static void __init psurge_dual_sync_tb(int cpu_nr)
-{
-	int t;
-
-	set_dec(tb_ticks_per_jiffy);
-	/* XXX fixme */
-	set_tb(0, 0);
-
-	if (cpu_nr > 0) {
+	/*
+	 * Also, because the timebase is frozen, we must not return to the
+	 * caller which will try to do udelay's etc... Instead, we wait -here-
+	 * for the CPU to callin.
+	 */
+	for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) {
+		for (j = 1; j < 10000; j++)
+			asm volatile("nop" : : : "memory");
+		asm volatile("sync" : : : "memory");
+	}
+	if (!cpu_callin_map[nr])
+		goto stuck;
+
+	/* And we do the TB sync here too for standard dual CPU cards */
+	if (psurge_type == PSURGE_DUAL) {
+		while(!tb_req)
+			barrier();
+		tb_req = 0;
+		mb();
+		timebase = get_tb();
+		mb();
+		while (timebase)
+			barrier();
 		mb();
-		sec_tb_reset = 1;
-		return;
 	}
+ stuck:
+	/* now interrupt the secondary, restarting both TBs */
+	if (psurge_type == PSURGE_DUAL)
+		psurge_set_ipi(1);
 
-	/* wait for the secondary to have reset its TB before proceeding */
-	for (t = 10000000; t > 0 && !sec_tb_reset; --t)
-		;
-
-	/* now interrupt the secondary, starting both TBs */
-	psurge_set_ipi(1);
+	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
 }
 
 static struct irqaction psurge_irqaction = {
@@ -390,36 +402,35 @@ static struct irqaction psurge_irqaction = {
 
 static void __init smp_psurge_setup_cpu(int cpu_nr)
 {
+	if (cpu_nr != 0)
+		return;
 
-	if (cpu_nr == 0) {
-		/* If we failed to start the second CPU, we should still
-		 * send it an IPI to start the timebase & DEC or we might
-		 * have them stuck.
-		 */
-		if (num_online_cpus() < 2) {
-			if (psurge_type == PSURGE_DUAL)
-				psurge_set_ipi(1);
-			return;
-		}
-		/* reset the entry point so if we get another intr we won't
-		 * try to startup again */
-		out_be32(psurge_start, 0x100);
-		if (setup_irq(30, &psurge_irqaction))
-			printk(KERN_ERR "Couldn't get primary IPI interrupt");
-	}
-
-	if (psurge_type == PSURGE_DUAL)
-		psurge_dual_sync_tb(cpu_nr);
+	/* reset the entry point so if we get another intr we won't
+	 * try to startup again */
+	out_be32(psurge_start, 0x100);
+	if (setup_irq(30, &psurge_irqaction))
+		printk(KERN_ERR "Couldn't get primary IPI interrupt");
 }
 
 void __init smp_psurge_take_timebase(void)
 {
-	/* Dummy implementation */
+	if (psurge_type != PSURGE_DUAL)
+		return;
+
+	tb_req = 1;
+	mb();
+	while (!timebase)
+		barrier();
+	mb();
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	timebase = 0;
+	mb();
+	set_dec(tb_ticks_per_jiffy/2);
 }
 
 void __init smp_psurge_give_timebase(void)
 {
-	/* Dummy implementation */
+	/* Nothing to do here */
 }
 
 /* PowerSurge-style Macs */
@@ -437,9 +448,6 @@ struct smp_ops_t psurge_smp_ops = {
  * Core 99 and later support
  */
 
-static void (*pmac_tb_freeze)(int freeze);
-static u64 timebase;
-static int tb_req;
 
 static void smp_core99_give_timebase(void)
 {
@@ -478,7 +486,6 @@ static void __devinit smp_core99_take_timebase(void)
 	set_tb(timebase >> 32, timebase & 0xffffffff);
 	timebase = 0;
 	mb();
-	set_dec(tb_ticks_per_jiffy/2);
 
 	local_irq_restore(flags);
 }
@@ -920,3 +927,34 @@ struct smp_ops_t core99_smp_ops = {
 # endif
 #endif
 };
+
+void __init pmac_setup_smp(void)
+{
+	struct device_node *np;
+
+	/* Check for Core99 */
+	np = of_find_node_by_name(NULL, "uni-n");
+	if (!np)
+		np = of_find_node_by_name(NULL, "u3");
+	if (!np)
+		np = of_find_node_by_name(NULL, "u4");
+	if (np) {
+		of_node_put(np);
+		smp_ops = &core99_smp_ops;
+	}
+#ifdef CONFIG_PPC32
+	else {
+		/* We have to set bits in cpu_possible_map here since the
+		 * secondary CPU(s) aren't in the device tree. Various
+		 * things won't be initialized for CPUs not in the possible
+		 * map, so we really need to fix it up here.
+		 */
+		int cpu;
+
+		for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
+			cpu_set(cpu, cpu_possible_map);
+		smp_ops = &psurge_smp_ops;
+	}
+#endif /* CONFIG_PPC32 */
+}
+
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 9fead0faf38..3f763c5284a 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -284,7 +284,6 @@ static int ps3_sb_free_mmio_region(struct ps3_mmio_region *r)
 	int result;
 
 	dump_mmio_region(r);
-;
 	result = lv1_unmap_device_mmio_region(r->dev->bus_id, r->dev->dev_id,
 		r->lpar_addr);
 
diff --git a/arch/powerpc/platforms/ps3/time.c b/arch/powerpc/platforms/ps3/time.c
index b178a1e66c9..40b5cb43300 100644
--- a/arch/powerpc/platforms/ps3/time.c
+++ b/arch/powerpc/platforms/ps3/time.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
+#include <asm/firmware.h>
 #include <asm/rtc.h>
 #include <asm/lv1call.h>
 #include <asm/ps3.h>
@@ -84,6 +85,9 @@ static int __init ps3_rtc_init(void)
 {
 	struct platform_device *pdev;
 
+	if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
+		return -ENODEV;
+
 	pdev = platform_device_register_simple("rtc-ps3", -1, NULL, 0);
 	if (IS_ERR(pdev))
 		return PTR_ERR(pdev);
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index e3139fa5e55..903eb9eec68 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -286,7 +286,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	unsigned long hpte_v, hpte_r;
 
 	if (!(vflags & HPTE_V_BOLTED))
-		pr_debug("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
+		pr_devel("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
 			 "rflags=%lx, vflags=%lx, psize=%d)\n",
 			 hpte_group, va, pa, rflags, vflags, psize);
 
@@ -294,7 +294,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	hpte_r = hpte_encode_r(pa, psize) | rflags;
 
 	if (!(vflags & HPTE_V_BOLTED))
-		pr_debug(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
+		pr_devel(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
 
 	/* Now fill in the actual HPTE */
 	/* Set CEC cookie to 0         */
@@ -311,7 +311,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
 	if (unlikely(lpar_rc == H_PTEG_FULL)) {
 		if (!(vflags & HPTE_V_BOLTED))
-			pr_debug(" full\n");
+			pr_devel(" full\n");
 		return -1;
 	}
 
@@ -322,11 +322,11 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	 */
 	if (unlikely(lpar_rc != H_SUCCESS)) {
 		if (!(vflags & HPTE_V_BOLTED))
-			pr_debug(" lpar err %lu\n", lpar_rc);
+			pr_devel(" lpar err %lu\n", lpar_rc);
 		return -2;
 	}
 	if (!(vflags & HPTE_V_BOLTED))
-		pr_debug(" -> slot: %lu\n", slot & 7);
+		pr_devel(" -> slot: %lu\n", slot & 7);
 
 	/* Because of iSeries, we have to pass down the secondary
 	 * bucket bit here as well
@@ -418,17 +418,17 @@ static long pSeries_lpar_hpte_updatepp(unsigned long slot,
 
 	want_v = hpte_encode_avpn(va, psize, ssize);
 
-	pr_debug("    update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
+	pr_devel("    update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
 		 want_v, slot, flags, psize);
 
 	lpar_rc = plpar_pte_protect(flags, slot, want_v);
 
 	if (lpar_rc == H_NOT_FOUND) {
-		pr_debug("not found !\n");
+		pr_devel("not found !\n");
 		return -1;
 	}
 
-	pr_debug("ok\n");
+	pr_devel("ok\n");
 
 	BUG_ON(lpar_rc != H_SUCCESS);
 
@@ -503,7 +503,7 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
 	unsigned long lpar_rc;
 	unsigned long dummy1, dummy2;
 
-	pr_debug("    inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
+	pr_devel("    inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
 		 slot, va, psize, local);
 
 	want_v = hpte_encode_avpn(va, psize, ssize);
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 1a231c389ba..1f8f6cfb94f 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -35,7 +35,6 @@
 #include <asm/prom.h>
 #include <asm/smp.h>
 #include <asm/paca.h>
-#include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/firmware.h>
@@ -118,31 +117,6 @@ static void __devinit smp_xics_setup_cpu(int cpu)
 }
 #endif /* CONFIG_XICS */
 
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit pSeries_give_timebase(void)
-{
-	spin_lock(&timebase_lock);
-	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
-	timebase = get_tb();
-	spin_unlock(&timebase_lock);
-
-	while (timebase)
-		barrier();
-	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit pSeries_take_timebase(void)
-{
-	while (!timebase)
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase >> 32, timebase & 0xffffffff);
-	timebase = 0;
-	spin_unlock(&timebase_lock);
-}
-
 static void __devinit smp_pSeries_kick_cpu(int nr)
 {
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -209,8 +183,8 @@ static void __init smp_init_pseries(void)
 
 	/* Non-lpar has additional take/give timebase */
 	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
-		smp_ops->give_timebase = pSeries_give_timebase;
-		smp_ops->take_timebase = pSeries_take_timebase;
+		smp_ops->give_timebase = rtas_give_timebase;
+		smp_ops->take_timebase = rtas_take_timebase;
 	}
 
 	pr_debug(" <- smp_init_pSeries()\n");
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index be3581a8c29..419f8a637ff 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -190,10 +190,10 @@ static void xics_unmask_irq(unsigned int virq)
 	int call_status;
 	int server;
 
-	pr_debug("xics: unmask virq %d\n", virq);
+	pr_devel("xics: unmask virq %d\n", virq);
 
 	irq = (unsigned int)irq_map[virq].hwirq;
-	pr_debug(" -> map to hwirq 0x%x\n", irq);
+	pr_devel(" -> map to hwirq 0x%x\n", irq);
 	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
 		return;
 
@@ -252,7 +252,7 @@ static void xics_mask_irq(unsigned int virq)
 {
 	unsigned int irq;
 
-	pr_debug("xics: mask virq %d\n", virq);
+	pr_devel("xics: mask virq %d\n", virq);
 
 	irq = (unsigned int)irq_map[virq].hwirq;
 	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
@@ -414,7 +414,7 @@ static int xics_host_match(struct irq_host *h, struct device_node *node)
 static int xics_host_map(struct irq_host *h, unsigned int virq,
 			 irq_hw_number_t hw)
 {
-	pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
+	pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
 
 	/* Insert the interrupt mapping into the radix tree for fast lookup */
 	irq_radix_revmap_insert(xics_host, virq, hw);
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 39db9d1155d..cbb3bed75d3 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -965,7 +965,7 @@ static inline void fsl_rio_info(struct device *dev, u32 ccsr)
 			break;
 		default:
 			str = "Unknown";
-			break;;
+			break;
 		}
 		dev_info(dev, "Hardware port width: %s\n", str);
 
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index a86d3ce01ea..69e2630c906 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -728,12 +728,10 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
 	if (ret)
 		return NULL;
 
-	ipic = alloc_bootmem(sizeof(struct ipic));
+	ipic = kzalloc(sizeof(*ipic), GFP_KERNEL);
 	if (ipic == NULL)
 		return NULL;
 
-	memset(ipic, 0, sizeof(struct ipic));
-
 	ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       NR_IPIC_INTS,
 				       &ipic_host_ops, 0);
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 9c3af504549..3981ae4cb58 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -279,28 +279,29 @@ static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr,
 }
 
 #ifdef CONFIG_PPC_DCR
-static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
+static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node,
+			  struct mpic_reg_bank *rb,
 			  unsigned int offset, unsigned int size)
 {
 	const u32 *dbasep;
 
-	dbasep = of_get_property(mpic->irqhost->of_node, "dcr-reg", NULL);
+	dbasep = of_get_property(node, "dcr-reg", NULL);
 
-	rb->dhost = dcr_map(mpic->irqhost->of_node, *dbasep + offset, size);
+	rb->dhost = dcr_map(node, *dbasep + offset, size);
 	BUG_ON(!DCR_MAP_OK(rb->dhost));
 }
 
-static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr,
-			    struct mpic_reg_bank *rb, unsigned int offset,
-			    unsigned int size)
+static inline void mpic_map(struct mpic *mpic, struct device_node *node,
+			    phys_addr_t phys_addr, struct mpic_reg_bank *rb,
+			    unsigned int offset, unsigned int size)
 {
 	if (mpic->flags & MPIC_USES_DCR)
-		_mpic_map_dcr(mpic, rb, offset, size);
+		_mpic_map_dcr(mpic, node, rb, offset, size);
 	else
 		_mpic_map_mmio(mpic, phys_addr, rb, offset, size);
 }
 #else /* CONFIG_PPC_DCR */
-#define mpic_map(m,p,b,o,s)	_mpic_map_mmio(m,p,b,o,s)
+#define mpic_map(m,n,p,b,o,s)	_mpic_map_mmio(m,p,b,o,s)
 #endif /* !CONFIG_PPC_DCR */
 
 
@@ -507,9 +508,8 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
 	printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n");
 
 	/* Allocate fixups array */
-	mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup));
+	mpic->fixups = kzalloc(128 * sizeof(*mpic->fixups), GFP_KERNEL);
 	BUG_ON(mpic->fixups == NULL);
-	memset(mpic->fixups, 0, 128 * sizeof(struct mpic_irq_fixup));
 
 	/* Init spinlock */
 	spin_lock_init(&mpic->fixup_lock);
@@ -1052,11 +1052,10 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	int		intvec_top;
 	u64		paddr = phys_addr;
 
-	mpic = alloc_bootmem(sizeof(struct mpic));
+	mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
 	if (mpic == NULL)
 		return NULL;
-	
-	memset(mpic, 0, sizeof(struct mpic));
+
 	mpic->name = name;
 
 	mpic->hc_irq = mpic_irq_chip;
@@ -1109,9 +1108,8 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 			psize /= 4;
 			bits = intvec_top + 1;
 			mapsize = BITS_TO_LONGS(bits) * sizeof(unsigned long);
-			mpic->protected = alloc_bootmem(mapsize);
+			mpic->protected = kzalloc(mapsize, GFP_KERNEL);
 			BUG_ON(mpic->protected == NULL);
-			memset(mpic->protected, 0, mapsize);
 			for (i = 0; i < psize; i++) {
 				if (psrc[i] > intvec_top)
 					continue;
@@ -1152,8 +1150,8 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	}
 
 	/* Map the global registers */
-	mpic_map(mpic, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
-	mpic_map(mpic, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
+	mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
+	mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
 
 	/* Reset */
 	if (flags & MPIC_WANTS_RESET) {
@@ -1194,7 +1192,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 
 	/* Map the per-CPU registers */
 	for (i = 0; i < mpic->num_cpus; i++) {
-		mpic_map(mpic, paddr, &mpic->cpuregs[i],
+		mpic_map(mpic, node, paddr, &mpic->cpuregs[i],
 			 MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE),
 			 0x1000);
 	}
@@ -1202,7 +1200,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	/* Initialize main ISU if none provided */
 	if (mpic->isu_size == 0) {
 		mpic->isu_size = mpic->num_sources;
-		mpic_map(mpic, paddr, &mpic->isus[0],
+		mpic_map(mpic, node, paddr, &mpic->isus[0],
 			 MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
 	}
 	mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
@@ -1256,8 +1254,10 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 
 	BUG_ON(isu_num >= MPIC_MAX_ISU);
 
-	mpic_map(mpic, paddr, &mpic->isus[isu_num], 0,
+	mpic_map(mpic, mpic->irqhost->of_node,
+		 paddr, &mpic->isus[isu_num], 0,
 		 MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
+
 	if ((isu_first + mpic->isu_size) > mpic->num_sources)
 		mpic->num_sources = isu_first + mpic->isu_size;
 }
@@ -1351,7 +1351,8 @@ void __init mpic_init(struct mpic *mpic)
 
 #ifdef CONFIG_PM
 	/* allocate memory to save mpic state */
-	mpic->save_data = alloc_bootmem(mpic->num_sources * sizeof(struct mpic_irq_save));
+	mpic->save_data = kmalloc(mpic->num_sources * sizeof(*mpic->save_data),
+				  GFP_KERNEL);
 	BUG_ON(mpic->save_data == NULL);
 #endif
 }
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index daefc93ddff..6ff9d71b4c0 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1531,7 +1531,7 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
 		 */
 
 		/* Calculate window size */
-		sa = (0xffffffffffffffffull << ilog2(ep_size));;
+		sa = (0xffffffffffffffffull << ilog2(ep_size));
 
 		/* Setup BAR0 */
 		out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
@@ -1550,7 +1550,7 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
 		out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr));
 	} else {
 		/* Calculate window size */
-		sa = (0xffffffffffffffffull << ilog2(size));;
+		sa = (0xffffffffffffffffull << ilog2(size));
 		if (res->flags & IORESOURCE_PREFETCH)
 			sa |= 0x8;
 
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index b28b0e512d6..237e3654f48 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -112,6 +112,7 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
 {
 	unsigned long flags;
 	u8 mcn_shift = 0, dev_shift = 0;
+	u32 ret;
 
 	spin_lock_irqsave(&qe_lock, flags);
 	if (cmd == QE_RESET) {
@@ -139,11 +140,13 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
 	}
 
 	/* wait for the QE_CR_FLG to clear */
-	while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
-		cpu_relax();
+	ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
+			   100, 0);
+	/* On timeout (e.g. failure), the expression will be false (ret == 0),
+	   otherwise it will be true (ret == 1). */
 	spin_unlock_irqrestore(&qe_lock, flags);
 
-	return 0;
+	return ret == 1;
 }
 EXPORT_SYMBOL(qe_issue_cmd);
 
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 63cdf9887f3..074905c3ee5 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -333,12 +333,10 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
 	if (ret)
 		return;
 
-	qe_ic = alloc_bootmem(sizeof(struct qe_ic));
+	qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
 	if (qe_ic == NULL)
 		return;
 
-	memset(qe_ic, 0, sizeof(struct qe_ic));
-
 	qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 					NR_QE_IC_INTS, &qe_ic_host_ops, 0);
 	if (qe_ic->irqhost == NULL)
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index d35405c5943..466ce9ace12 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -258,11 +258,10 @@ static struct uic * __init uic_init_one(struct device_node *node)
 
 	BUG_ON(! of_device_is_compatible(node, "ibm,uic"));
 
-	uic = alloc_bootmem(sizeof(*uic));
+	uic = kzalloc(sizeof(*uic), GFP_KERNEL);
 	if (! uic)
 		return NULL; /* FIXME: panic? */
 
-	memset(uic, 0, sizeof(*uic));
 	spin_lock_init(&uic->lock);
 	indexp = of_get_property(node, "cell-index", &len);
 	if (!indexp || (len != sizeof(u32))) {
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index 3ee1fd37bbf..40edad52077 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -234,7 +234,6 @@ static void xilinx_i8259_cascade(unsigned int irq, struct irq_desc *desc)
 		generic_handle_irq(cascade_irq);
 
 	/* Let xilinx_intc end the interrupt */
-	desc->chip->ack(irq);
 	desc->chip->unmask(irq);
 }
 
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index e577839f307..2ae5d72f47e 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -95,6 +95,11 @@ config S390
 	select HAVE_ARCH_TRACEHOOK
 	select INIT_ALL_POSSIBLE
 	select HAVE_PERF_COUNTERS
+	select GENERIC_ATOMIC64 if !64BIT
+
+config SCHED_OMIT_FRAME_POINTER
+	bool
+	default y
 
 source "init/Kconfig"
 
@@ -116,6 +121,9 @@ config 32BIT
 	bool
 	default y if !64BIT
 
+config KTIME_SCALAR
+	def_bool 32BIT
+
 config SMP
 	bool "Symmetric multi-processing support"
 	---help---
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index fca9dffcc66..c7d0abfb0f0 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -268,7 +268,12 @@ static __inline__ int atomic64_add_unless(atomic64_t *v,
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
 
 #undef __CSG_LOOP
-#endif
+
+#else /* __s390x__ */
+
+#include <asm-generic/atomic64.h>
+
+#endif /* __s390x__ */
 
 #define smp_mb__before_atomic_dec()	smp_mb()
 #define smp_mb__after_atomic_dec()	smp_mb()
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index a27d0d5a6f8..1cd02f6073a 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -99,7 +99,9 @@ struct kvm_s390_sie_block {
 	__u8	reservedd0[48];		/* 0x00d0 */
 	__u64	gcr[16];		/* 0x0100 */
 	__u64	gbea;			/* 0x0180 */
-	__u8	reserved188[120];	/* 0x0188 */
+	__u8	reserved188[24];	/* 0x0188 */
+	__u32	fac;			/* 0x01a0 */
+	__u8	reserved1a4[92];	/* 0x01a4 */
 } __attribute__((packed));
 
 struct kvm_vcpu_stat {
diff --git a/arch/s390/include/asm/perf_counter.h b/arch/s390/include/asm/perf_counter.h
index a7205a3828c..7015188c2cc 100644
--- a/arch/s390/include/asm/perf_counter.h
+++ b/arch/s390/include/asm/perf_counter.h
@@ -6,3 +6,5 @@
 
 static inline void set_perf_counter_pending(void) {}
 static inline void clear_perf_counter_pending(void) {}
+
+#define PERF_COUNTER_INDEX_OFFSET 0
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 925bcc64903..ba1cab9fc1f 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -61,7 +61,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
index 3d8a96d39d9..81150b05368 100644
--- a/arch/s390/include/asm/tlb.h
+++ b/arch/s390/include/asm/tlb.h
@@ -96,7 +96,8 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
  * pte_free_tlb frees a pte table and clears the CRSTE for the
  * page table from the tlb.
  */
-static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte)
+static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
+				unsigned long address)
 {
 	if (!tlb->fullmm) {
 		tlb->array[tlb->nr_ptes++] = pte;
@@ -113,7 +114,8 @@ static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte)
  * as the pgd. pmd_free_tlb checks the asce_limit against 2GB
  * to avoid the double free of the pmd in this case.
  */
-static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+				unsigned long address)
 {
 #ifdef __s390x__
 	if (tlb->mm->context.asce_limit <= (1UL << 31))
@@ -134,7 +136,8 @@ static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
  * as the pgd. pud_free_tlb checks the asce_limit against 4TB
  * to avoid the double free of the pud in this case.
  */
-static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
+				unsigned long address)
 {
 #ifdef __s390x__
 	if (tlb->mm->context.asce_limit <= (1UL << 42))
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index d2f270c995d..db943a7ec51 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -15,7 +15,6 @@
 #include <linux/timer.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index f9b144049dc..cae14c49951 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -208,9 +208,12 @@ static noinline __init void detect_machine_type(void)
 		machine_flags |= MACHINE_FLAG_KVM;
 	else
 		machine_flags |= MACHINE_FLAG_VM;
+
+	/* Store machine flags for setting up lowcore early */
+	S390_lowcore.machine_flags = machine_flags;
 }
 
-static void early_pgm_check_handler(void)
+static __init void early_pgm_check_handler(void)
 {
 	unsigned long addr;
 	const struct exception_table_entry *fixup;
@@ -222,7 +225,7 @@ static void early_pgm_check_handler(void)
 	S390_lowcore.program_old_psw.addr = fixup->fixup | PSW_ADDR_AMODE;
 }
 
-void setup_lowcore_early(void)
+static noinline __init void setup_lowcore_early(void)
 {
 	psw_t psw;
 
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index b8bf4b14006..371a2d88f4a 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -70,6 +70,7 @@ struct shutdown_action {
 	char *name;
 	void (*fn) (struct shutdown_trigger *trigger);
 	int (*init) (void);
+	int init_rc;
 };
 
 static char *ipl_type_str(enum ipl_type type)
@@ -1486,11 +1487,13 @@ static int set_trigger(const char *buf, struct shutdown_trigger *trigger,
 	int i;
 
 	for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) {
-		if (!shutdown_actions_list[i])
-			continue;
 		if (sysfs_streq(buf, shutdown_actions_list[i]->name)) {
-			trigger->action = shutdown_actions_list[i];
-			return len;
+			if (shutdown_actions_list[i]->init_rc) {
+				return shutdown_actions_list[i]->init_rc;
+			} else {
+				trigger->action = shutdown_actions_list[i];
+				return len;
+			}
 		}
 	}
 	return -EINVAL;
@@ -1640,8 +1643,8 @@ static void __init shutdown_actions_init(void)
 	for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) {
 		if (!shutdown_actions_list[i]->init)
 			continue;
-		if (shutdown_actions_list[i]->init())
-			shutdown_actions_list[i] = NULL;
+		shutdown_actions_list[i]->init_rc =
+			shutdown_actions_list[i]->init();
 	}
 }
 
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 490b39934d6..43acd73105b 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -26,7 +26,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 9717717c6fe..cbb897bc50b 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -154,6 +154,20 @@ static int __init condev_setup(char *str)
 
 __setup("condev=", condev_setup);
 
+static void __init set_preferred_console(void)
+{
+	if (MACHINE_IS_KVM) {
+		add_preferred_console("hvc", 0, NULL);
+		s390_virtio_console_init();
+		return;
+	}
+
+	if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP)
+		add_preferred_console("ttyS", 0, NULL);
+	if (CONSOLE_IS_3270)
+		add_preferred_console("tty3270", 0, NULL);
+}
+
 static int __init conmode_setup(char *str)
 {
 #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
@@ -168,6 +182,7 @@ static int __init conmode_setup(char *str)
 	if (strncmp(str, "3270", 5) == 0)
 		SET_CONSOLE_3270;
 #endif
+	set_preferred_console();
         return 1;
 }
 
@@ -780,9 +795,6 @@ static void __init setup_hwcaps(void)
 void __init
 setup_arch(char **cmdline_p)
 {
-	/* set up preferred console */
-	add_preferred_console("ttyS", 0, NULL);
-
         /*
          * print what head.S has found out about the machine
          */
@@ -802,11 +814,9 @@ setup_arch(char **cmdline_p)
 	if (MACHINE_IS_VM)
 		pr_info("Linux is running as a z/VM "
 			"guest operating system in 64-bit mode\n");
-	else if (MACHINE_IS_KVM) {
+	else if (MACHINE_IS_KVM)
 		pr_info("Linux is running under KVM in 64-bit mode\n");
-		add_preferred_console("hvc", 0, NULL);
-		s390_virtio_console_init();
-	} else
+	else
 		pr_info("Linux is running natively in 64-bit mode\n");
 #endif /* CONFIG_64BIT */
 
@@ -851,6 +861,7 @@ setup_arch(char **cmdline_p)
 
         /* Setup default console */
 	conmode_default();
+	set_preferred_console();
 
 	/* Setup zfcpdump support */
 	setup_zfcpdump(console_devno);
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 2270730f535..be2cae08340 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -687,13 +687,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 #ifndef CONFIG_64BIT
 	if (MACHINE_HAS_IEEE)
 		lowcore->extended_save_area_addr = (u32) save_area;
-#else
-	if (vdso_alloc_per_cpu(smp_processor_id(), lowcore))
-		BUG();
 #endif
 	set_prefix((u32)(unsigned long) lowcore);
 	local_mcck_enable();
 	local_irq_enable();
+#ifdef CONFIG_64BIT
+	if (vdso_alloc_per_cpu(smp_processor_id(), &S390_lowcore))
+		BUG();
+#endif
 	for_each_possible_cpu(cpu)
 		if (cpu != smp_processor_id())
 			smp_create_idle(cpu);
diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S
index 79dbfee831e..49106c6e6f8 100644
--- a/arch/s390/kernel/vdso64/clock_gettime.S
+++ b/arch/s390/kernel/vdso64/clock_gettime.S
@@ -88,10 +88,17 @@ __kernel_clock_gettime:
 	llilh	%r4,0x0100
 	sar	%a4,%r4
 	lghi	%r4,0
+	epsw	%r5,0
 	sacf	512				/* Magic ectg instruction */
 	.insn	ssf,0xc80100000000,__VDSO_ECTG_BASE(4),__VDSO_ECTG_USER(4),4
-	sacf	0
-	sar	%a4,%r2
+	tml	%r5,0x4000
+	jo	11f
+	tml	%r5,0x8000
+	jno	10f
+	sacf	256
+	j	11f
+10:	sacf	0
+11:	sar	%a4,%r2
 	algr	%r1,%r0				/* r1 = cputime as TOD value */
 	mghi	%r1,1000			/* convert to nanoseconds */
 	srlg	%r1,%r1,12			/* r1 = cputime in nanosec */
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index f04f5301b1b..4d613415c43 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -386,7 +386,7 @@ no_timer:
 	}
 	__unset_cpu_idle(vcpu);
 	__set_current_state(TASK_RUNNING);
-	remove_wait_queue(&vcpu->wq, &wait);
+	remove_wait_queue(&vcpu->arch.local_int.wq, &wait);
 	spin_unlock_bh(&vcpu->arch.local_int.lock);
 	spin_unlock(&vcpu->arch.local_int.float_int->lock);
 	hrtimer_try_to_cancel(&vcpu->arch.ckc_timer);
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index c18b21d6991..90d9d1ba258 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -25,6 +25,7 @@
 #include <asm/lowcore.h>
 #include <asm/pgtable.h>
 #include <asm/nmi.h>
+#include <asm/system.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
 
@@ -69,6 +70,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ NULL }
 };
 
+static unsigned long long *facilities;
 
 /* Section: not file related */
 void kvm_arch_hardware_enable(void *garbage)
@@ -288,6 +290,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 	vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
 	vcpu->arch.sie_block->ecb   = 2;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
+	vcpu->arch.sie_block->fac   = (int) (long) facilities;
 	hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
 	tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet,
 		     (unsigned long) vcpu);
@@ -739,11 +742,29 @@ gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 
 static int __init kvm_s390_init(void)
 {
-	return kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+	int ret;
+	ret = kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+	if (ret)
+		return ret;
+
+	/*
+	 * guests can ask for up to 255+1 double words, we need a full page
+	 * to hold the maximum amount of facilites. On the other hand, we
+	 * only set facilities that are known to work in KVM.
+	 */
+	facilities = (unsigned long long *) get_zeroed_page(GFP_DMA);
+	if (!facilities) {
+		kvm_exit();
+		return -ENOMEM;
+	}
+	stfle(facilities, 1);
+	facilities[0] &= 0xff00fff3f0700000ULL;
+	return 0;
 }
 
 static void __exit kvm_s390_exit(void)
 {
+	free_page((unsigned long) facilities);
 	kvm_exit();
 }
 
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 93ecd06e1a7..d426aac8095 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -158,7 +158,7 @@ static int handle_stfl(struct kvm_vcpu *vcpu)
 
 	vcpu->stat.instruction_stfl++;
 	/* only pass the facility bits, which we can handle */
-	facility_list &= 0xfe00fff3;
+	facility_list &= 0xff00fff3;
 
 	rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list),
 			   &facility_list, sizeof(facility_list));
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 36678835034..0ef81d6776e 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -169,7 +169,7 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
 			     unsigned long *reg)
 {
 	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
-	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_local_interrupt *li = NULL;
 	struct kvm_s390_interrupt_info *inti;
 	int rc;
 	u8 tmp;
@@ -189,9 +189,10 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
 		return 2; /* busy */
 
 	spin_lock(&fi->lock);
-	li = fi->local_int[cpu_addr];
+	if (cpu_addr < KVM_MAX_VCPUS)
+		li = fi->local_int[cpu_addr];
 
-	if ((cpu_addr >= KVM_MAX_VCPUS) || (li == NULL)) {
+	if (li == NULL) {
 		rc = 1; /* incorrect state */
 		*reg &= SIGP_STAT_INCORRECT_STATE;
 		kfree(inti);
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index ab6735df2d2..97975ec7a27 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -3,6 +3,6 @@
 #
 
 lib-y += delay.o string.o uaccess_std.o uaccess_pt.o
-obj-$(CONFIG_32BIT) += div64.o qrnnd.o
+obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o
 lib-$(CONFIG_64BIT) += uaccess_mvcos.o
 lib-$(CONFIG_SMP) += spinlock.o
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 3f5f680726e..97c1eca83cc 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -36,9 +36,11 @@ static void __udelay_disabled(unsigned long usecs)
 	cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
 	__ctl_load(cr0 , 0, 0);
 	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+	lockdep_off();
 	trace_hardirqs_on();
 	__load_psw_mask(mask);
 	local_irq_disable();
+	lockdep_on();
 	__ctl_load(cr0_saved, 0, 0);
 	local_tick_enable(clock_saved);
 	set_clock_comparator(S390_lowcore.clock_comparator);
diff --git a/arch/s390/lib/ucmpdi2.c b/arch/s390/lib/ucmpdi2.c
new file mode 100644
index 00000000000..3e05ff53258
--- /dev/null
+++ b/arch/s390/lib/ucmpdi2.c
@@ -0,0 +1,26 @@
+#include <linux/module.h>
+
+union ull_union {
+	unsigned long long ull;
+	struct {
+		unsigned int high;
+		unsigned int low;
+	} ui;
+};
+
+int __ucmpdi2(unsigned long long a, unsigned long long b)
+{
+	union ull_union au = {.ull = a};
+	union ull_union bu = {.ull = b};
+
+	if (au.ui.high < bu.ui.high)
+		return 0;
+	else if (au.ui.high > bu.ui.high)
+		return 2;
+	if (au.ui.low < bu.ui.low)
+		return 0;
+	else if (au.ui.low > bu.ui.low)
+		return 2;
+	return 1;
+}
+EXPORT_SYMBOL(__ucmpdi2);
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 74eb26bf197..e5e119fe03b 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -22,7 +22,6 @@
 #include <linux/compat.h>
 #include <linux/smp.h>
 #include <linux/kdebug.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/module.h>
diff --git a/arch/s390/power/swsusp.c b/arch/s390/power/swsusp.c
index e6a4fe9f5f2..bd1f5c6b0b8 100644
--- a/arch/s390/power/swsusp.c
+++ b/arch/s390/power/swsusp.c
@@ -7,24 +7,36 @@
  *
  */
 
+#include <asm/system.h>
 
-/*
- * save CPU registers before creating a hibernation image and before
- * restoring the memory state from it
- */
 void save_processor_state(void)
 {
-	/* implentation contained in the
-	 * swsusp_arch_suspend function
+	/* swsusp_arch_suspend() actually saves all cpu register contents.
+	 * Machine checks must be disabled since swsusp_arch_suspend() stores
+	 * register contents to their lowcore save areas. That's the same
+	 * place where register contents on machine checks would be saved.
+	 * To avoid register corruption disable machine checks.
+	 * We must also disable machine checks in the new psw mask for
+	 * program checks, since swsusp_arch_suspend() may generate program
+	 * checks. Disabling machine checks for all other new psw masks is
+	 * just paranoia.
 	 */
+	local_mcck_disable();
+	/* Disable lowcore protection */
+	__ctl_clear_bit(0,28);
+	S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK;
 }
 
-/*
- * restore the contents of CPU registers
- */
 void restore_processor_state(void)
 {
-	/* implentation contained in the
-	 * swsusp_arch_resume function
-	 */
+	S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK;
+	/* Enable lowcore protection */
+	__ctl_set_bit(0,28);
+	local_mcck_enable();
 }
diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S
index 76d688da32f..b26df5c5933 100644
--- a/arch/s390/power/swsusp_asm64.S
+++ b/arch/s390/power/swsusp_asm64.S
@@ -32,19 +32,14 @@ swsusp_arch_suspend:
 	/* Deactivate DAT */
 	stnsm	__SF_EMPTY(%r15),0xfb
 
-	/* Switch off lowcore protection */
-	stctg	%c0,%c0,__SF_EMPTY(%r15)
-	ni	__SF_EMPTY+4(%r15),0xef
-	lctlg	%c0,%c0,__SF_EMPTY(%r15)
-
 	/* Store prefix register on stack */
 	stpx	__SF_EMPTY(%r15)
 
-	/* Setup base register for lowcore (absolute 0) */
-	llgf	%r1,__SF_EMPTY(%r15)
+	/* Save prefix register contents for lowcore */
+	llgf	%r4,__SF_EMPTY(%r15)
 
 	/* Get pointer to save area */
-	aghi	%r1,0x1000
+	lghi	%r1,0x1000
 
 	/* Store registers */
 	mvc	0x318(4,%r1),__SF_EMPTY(%r15)	/* move prefix to lowcore */
@@ -79,17 +74,15 @@ swsusp_arch_suspend:
 	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
 	spx	__SF_EMPTY(%r15)
 
-	/* Setup lowcore */
-	brasl	%r14,setup_lowcore_early
+	lghi	%r2,0
+	lghi	%r3,2*PAGE_SIZE
+	lghi	%r5,2*PAGE_SIZE
+1:	mvcle	%r2,%r4,0
+	jo	1b
 
 	/* Save image */
 	brasl	%r14,swsusp_save
 
-	/* Switch on lowcore protection */
-	stctg	%c0,%c0,__SF_EMPTY(%r15)
-	oi	__SF_EMPTY+4(%r15),0x10
-	lctlg	%c0,%c0,__SF_EMPTY(%r15)
-
 	/* Restore prefix register and return */
 	lghi	%r1,0x1000
 	spx	0x318(%r1)
@@ -117,11 +110,6 @@ swsusp_arch_resume:
 	/* Deactivate DAT */
 	stnsm	__SF_EMPTY(%r15),0xfb
 
-	/* Switch off lowcore protection */
-	stctg	%c0,%c0,__SF_EMPTY(%r15)
-	ni	__SF_EMPTY+4(%r15),0xef
-	lctlg	%c0,%c0,__SF_EMPTY(%r15)
-
 	/* Set prefix page to zero */
 	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
 	spx	__SF_EMPTY(%r15)
@@ -175,7 +163,7 @@ swsusp_arch_resume:
 	/* Load old stack */
 	lg	%r15,0x2f8(%r13)
 
-	/* Pointer to save arae */
+	/* Pointer to save area */
 	lghi	%r13,0x1000
 
 #ifdef CONFIG_SMP
@@ -187,11 +175,6 @@ swsusp_arch_resume:
 	/* Restore prefix register */
 	spx	0x318(%r13)
 
-	/* Switch on lowcore protection */
-	stctg	%c0,%c0,__SF_EMPTY(%r15)
-	oi	__SF_EMPTY+4(%r15),0x10
-	lctlg	%c0,%c0,__SF_EMPTY(%r15)
-
 	/* Activate DAT */
 	stosm	__SF_EMPTY(%r15),0x04
 
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 8ece0b5bd02..39224b57c6e 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -61,10 +61,6 @@ config EARLY_PRINTK
 	  select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
 	  the kernel command line option to toggle back and forth.
 
-config DEBUG_BOOTMEM
-	depends on DEBUG_KERNEL
-	bool "Debug BOOTMEM initialization"
-
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL && SUPERH32
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 7ffd1b4315b..b9c88cc519e 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -547,7 +547,7 @@ static int __init ap325rxa_devices_setup(void)
 	return platform_add_devices(ap325rxa_devices,
 				ARRAY_SIZE(ap325rxa_devices));
 }
-device_initcall(ap325rxa_devices_setup);
+arch_initcall(ap325rxa_devices_setup);
 
 /* Return the board specific boot mode pin configuration */
 static int ap325rxa_mode_pins(void)
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index f70f4644deb..f9b2e4df35b 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -608,7 +608,7 @@ static int __init migor_devices_setup(void)
 
 	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
-__initcall(migor_devices_setup);
+arch_initcall(migor_devices_setup);
 
 /* Return the board specific boot mode pin configuration */
 static int migor_mode_pins(void)
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 9c3a33210d6..180455642a4 100644
--- a/arch/sh/boards/mach-se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -50,7 +50,7 @@ unsigned char se7206_inb_p(unsigned long port)
 
 unsigned short se7206_inw(unsigned long port)
 {
-	return *port2adr(port);;
+	return *port2adr(port);
 }
 
 void se7206_outb(unsigned char value, unsigned long port)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 9cd04bd558b..15456a0773b 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -19,10 +19,13 @@
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/usb/r8a66597.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
+#include <asm/clock.h>
 #include <asm/sh_keysc.h>
 #include <cpu/sh7724.h>
 #include <mach-se/mach/se7724.h>
@@ -235,7 +238,7 @@ static struct platform_device ceu1_device = {
 	},
 };
 
-/* KEYSC */
+/* KEYSC in SoC (Needs SW33-2 set to ON) */
 static struct sh_keysc_info keysc_info = {
 	.mode = SH_KEYSC_MODE_1,
 	.scan_timing = 10,
@@ -252,12 +255,13 @@ static struct sh_keysc_info keysc_info = {
 
 static struct resource keysc_resources[] = {
 	[0] = {
-		.start  = 0x1a204000,
-		.end    = 0x1a20400f,
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = IRQ0_KEY,
+		.start  = 79,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -272,6 +276,62 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* SH Eth */
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 91,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8187 */
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
+static struct r8a66597_platdata sh7724_usb0_host_data = {
+};
+
+static struct resource sh7724_usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d800ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7724_usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh7724_usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7724_usb0_host_resources),
+	.resource	= sh7724_usb0_host_resources,
+};
+
 static struct platform_device *ms7724se_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_eth_device,
@@ -280,11 +340,62 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&ceu0_device,
 	&ceu1_device,
 	&keysc_device,
+	&sh_eth_device,
+	&sh7724_usb0_host_device,
 };
 
+#define EEPROM_OP   0xBA206000
+#define EEPROM_ADR  0xBA206004
+#define EEPROM_DATA 0xBA20600C
+#define EEPROM_STAT 0xBA206010
+#define EEPROM_STRT 0xBA206014
+static int __init sh_eth_is_eeprom_ready(void)
+{
+	int t = 10000;
+
+	while (t--) {
+		if (!ctrl_inw(EEPROM_STAT))
+			return 1;
+		cpu_relax();
+	}
+
+	printk(KERN_ERR "ms7724se can not access to eeprom\n");
+	return 0;
+}
+
+static void __init sh_eth_init(void)
+{
+	int i;
+	u16 mac[3];
+
+	/* check EEPROM status */
+	if (!sh_eth_is_eeprom_ready())
+		return;
+
+	/* read MAC addr from EEPROM */
+	for (i = 0 ; i < 3 ; i++) {
+		ctrl_outw(0x0, EEPROM_OP); /* read */
+		ctrl_outw(i*2, EEPROM_ADR);
+		ctrl_outw(0x1, EEPROM_STRT);
+		if (!sh_eth_is_eeprom_ready())
+			return;
+
+		mac[i] = ctrl_inw(EEPROM_DATA);
+		mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+	}
+
+	/* reset sh-eth */
+	ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+	/* set MAC addr */
+	ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
+	ctrl_outl((mac[2]), SH_ETH_MALR);
+}
+
 #define SW4140    0xBA201000
 #define FPGA_OUT  0xBA200400
 #define PORT_HIZA 0xA4050158
+#define PORT_MSELCRB 0xA4050182
 
 #define SW41_A    0x0100
 #define SW41_B    0x0200
@@ -294,6 +405,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 #define SW41_F    0x2000
 #define SW41_G    0x4000
 #define SW41_H    0x8000
+
 static int __init devices_setup(void)
 {
 	u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
@@ -302,9 +414,16 @@ static int __init devices_setup(void)
 	ctrl_outw(ctrl_inw(FPGA_OUT) &
 		  ~((1 << 1)  | /* LAN */
 		    (1 << 6)  | /* VIDEO DAC */
-		    (1 << 12)), /* USB0 */
+		    (1 << 12) | /* USB0 */
+		    (1 << 14)), /* RMII */
 		  FPGA_OUT);
 
+	/* turn on USB clocks, use external clock */
+	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+
+	/* enable USB0 port */
+	ctrl_outw(0x0600, 0xa40501d4);
+
 	/* enable IRQ 0,1,2 */
 	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
 	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
@@ -374,7 +493,7 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_VIO0_CLK, NULL);
 	gpio_request(GPIO_FN_VIO0_FLD, NULL);
 	gpio_request(GPIO_FN_VIO0_HD,  NULL);
-	platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20);
+	platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
 
 	/* enable CEU1 */
 	gpio_request(GPIO_FN_VIO1_D7,  NULL);
@@ -389,7 +508,7 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_VIO1_HD,  NULL);
 	gpio_request(GPIO_FN_VIO1_VD,  NULL);
 	gpio_request(GPIO_FN_VIO1_CLK, NULL);
-	platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20);
+	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
 
 	/* KEYSC */
 	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
@@ -404,6 +523,28 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_KEYOUT1,     NULL);
 	gpio_request(GPIO_FN_KEYOUT0,     NULL);
 
+	/*
+	 * enable SH-Eth
+	 *
+	 * please remove J33 pin from your board !!
+	 *
+	 * ms7724 board should not use GPIO_FN_LNKSTA pin
+	 * So, This time PTX5 is set to input pin
+	 */
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_PTX5, NULL);
+	gpio_direction_input(GPIO_PTX5);
+	sh_eth_init();
+
 	if (sw & SW41_B) {
 		/* SVGA */
 		lcdc_info.ch[0].lcd_cfg.xres         = 800;
@@ -437,7 +578,7 @@ static int __init devices_setup(void)
 	}
 
 	return platform_add_devices(ms7724se_devices,
-				ARRAY_SIZE(ms7724se_devices));
+				    ARRAY_SIZE(ms7724se_devices));
 }
 device_initcall(devices_setup);
 
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index da627d22c00..b18cfd39cac 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -309,7 +309,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
+CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
 
 #
 # Bus options
@@ -858,7 +858,35 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -870,6 +898,27 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+CONFIG_LOGO_SUPERH_VGA16=y
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index 3840270283e..3ee783a0a07 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.30
-# Thu Jun 18 16:09:05 2009
+# Mon Jun 29 16:28:43 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -88,10 +91,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
 
 #
 # Performance Counters
 #
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
@@ -107,6 +112,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -119,7 +128,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -584,7 +593,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -624,7 +632,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
-# CONFIG_SH_ETH is not set
+CONFIG_SH_ETH=y
 CONFIG_SMC91X=y
 # CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
@@ -801,6 +809,11 @@ CONFIG_SPI_BITBANG=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -851,6 +864,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -1196,6 +1211,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1260,6 +1276,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 CONFIG_FILE_LOCKING=y
diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
index a8153c2aa6f..d8e6bb9c0cc 100644
--- a/arch/sh/include/asm/perf_counter.h
+++ b/arch/sh/include/asm/perf_counter.h
@@ -2,6 +2,8 @@
 #define __ASM_SH_PERF_COUNTER_H
 
 /* SH only supports software counters through this interface. */
-#define set_perf_counter_pending()	do { } while (0)
+static inline void set_perf_counter_pending(void) {}
+
+#define PERF_COUNTER_INDEX_OFFSET	0
 
 #endif /* __ASM_SH_PERF_COUNTER_H */
diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h
index 84dd2db7104..63ca37bd9a9 100644
--- a/arch/sh/include/asm/pgalloc.h
+++ b/arch/sh/include/asm/pgalloc.h
@@ -73,20 +73,12 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	quicklist_free_page(QUICK_PT, NULL, pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,addr)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), (pte));			\
 } while (0)
 
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-
-#define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb,x)		do { } while (0)
-
 static inline void check_pgt_cache(void)
 {
 	quicklist_trim(QUICK_PGD, NULL, 25, 16);
diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
index 5bc34681d99..6f83f2cc45c 100644
--- a/arch/sh/include/asm/syscall_32.h
+++ b/arch/sh/include/asm/syscall_32.h
@@ -3,6 +3,7 @@
 
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/err.h>
 #include <asm/ptrace.h>
 
 /* The system call number is given by the user in R3 */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index f09ac480629..d570ac2e5cb 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -51,7 +51,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
index 9c16f737074..da8fe7ab872 100644
--- a/arch/sh/include/asm/tlb.h
+++ b/arch/sh/include/asm/tlb.h
@@ -91,9 +91,9 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
-#define pud_free_tlb(tlb, pudp)		pud_free((tlb)->mm, pudp)
+#define pte_free_tlb(tlb, ptep, addr)	pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
+#define pud_free_tlb(tlb, pudp, addr)	pud_free((tlb)->mm, pudp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
index 74164b60d0d..29514a39d0f 100644
--- a/arch/sh/include/mach-se/mach/se7724.h
+++ b/arch/sh/include/mach-se/mach/se7724.h
@@ -20,6 +20,11 @@
  */
 #include <asm/addrspace.h>
 
+/* SH Eth */
+#define SH_ETH_ADDR	(0xA4600000)
+#define SH_ETH_MAHR	(SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR	(SH_ETH_ADDR + 0x1C8)
+
 #define PA_LED		(0xba203000)	/* 8bit LED */
 #define IRQ_MODE	(0xba200010)
 #define IRQ0_SR		(0xba200014)
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index 13798733f2d..8555c05e866 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -187,7 +187,7 @@ static int __init sh7619_devices_setup(void)
 	return platform_add_devices(sh7619_devices,
 				    ARRAY_SIZE(sh7619_devices));
 }
-__initcall(sh7619_devices_setup);
+arch_initcall(sh7619_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
index 869c2da4820..b6737644531 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
@@ -238,7 +238,7 @@ static int __init mxg_devices_setup(void)
 	return platform_add_devices(mxg_devices,
 				    ARRAY_SIZE(mxg_devices));
 }
-__initcall(mxg_devices_setup);
+arch_initcall(mxg_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
index d8febe12806..fbde5b75deb 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
@@ -357,7 +357,7 @@ static int __init sh7201_devices_setup(void)
 	return platform_add_devices(sh7201_devices,
 				    ARRAY_SIZE(sh7201_devices));
 }
-__initcall(sh7201_devices_setup);
+arch_initcall(sh7201_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
index 62e3039d239..d3fd536c9a8 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -367,7 +367,7 @@ static int __init sh7203_devices_setup(void)
 	return platform_add_devices(sh7203_devices,
 				    ARRAY_SIZE(sh7203_devices));
 }
-__initcall(sh7203_devices_setup);
+arch_initcall(sh7203_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index 3e6f3d7a58b..a9ccc5e8d9e 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -338,7 +338,7 @@ static int __init sh7206_devices_setup(void)
 	return platform_add_devices(sh7206_devices,
 				    ARRAY_SIZE(sh7206_devices));
 }
-__initcall(sh7206_devices_setup);
+arch_initcall(sh7206_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index 88f742fed9e..c2310598387 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -222,7 +222,7 @@ static int __init sh7705_devices_setup(void)
 	return platform_add_devices(sh7705_devices,
 				    ARRAY_SIZE(sh7705_devices));
 }
-__initcall(sh7705_devices_setup);
+arch_initcall(sh7705_devices_setup);
 
 static struct platform_device *sh7705_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
index c5630679858..347ab35d069 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -250,7 +250,7 @@ static int __init sh770x_devices_setup(void)
 	return platform_add_devices(sh770x_devices,
 		ARRAY_SIZE(sh770x_devices));
 }
-__initcall(sh770x_devices_setup);
+arch_initcall(sh770x_devices_setup);
 
 static struct platform_device *sh770x_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index efa76c8148f..717e90ae109 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -226,7 +226,7 @@ static int __init sh7710_devices_setup(void)
 	return platform_add_devices(sh7710_devices,
 				    ARRAY_SIZE(sh7710_devices));
 }
-__initcall(sh7710_devices_setup);
+arch_initcall(sh7710_devices_setup);
 
 static struct platform_device *sh7710_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
index 5b2107798ed..74d8baaf8e9 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -388,7 +388,7 @@ static int __init sh7720_devices_setup(void)
 	return platform_add_devices(sh7720_devices,
 				    ARRAY_SIZE(sh7720_devices));
 }
-__initcall(sh7720_devices_setup);
+arch_initcall(sh7720_devices_setup);
 
 static struct platform_device *sh7720_early_devices[] __initdata = {
 	&cmt0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
index 6d088d12359..de4827df19a 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -138,7 +138,7 @@ static int __init sh4202_devices_setup(void)
 	return platform_add_devices(sh4202_devices,
 				    ARRAY_SIZE(sh4202_devices));
 }
-__initcall(sh4202_devices_setup);
+arch_initcall(sh4202_devices_setup);
 
 static struct platform_device *sh4202_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index 851672d15cf..1b8b122e8f3 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -239,7 +239,7 @@ static int __init sh7750_devices_setup(void)
 	return platform_add_devices(sh7750_devices,
 				    ARRAY_SIZE(sh7750_devices));
 }
-__initcall(sh7750_devices_setup);
+arch_initcall(sh7750_devices_setup);
 
 static struct platform_device *sh7750_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 5b822519bd9..7fbb7be9284 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -265,7 +265,7 @@ static int __init sh7760_devices_setup(void)
 	return platform_add_devices(sh7760_devices,
 				    ARRAY_SIZE(sh7760_devices));
 }
-__initcall(sh7760_devices_setup);
+arch_initcall(sh7760_devices_setup);
 
 static struct platform_device *sh7760_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 6307e087c86..ac4d5672ec1 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -325,7 +325,7 @@ static int __init sh7343_devices_setup(void)
 	return platform_add_devices(sh7343_devices,
 				    ARRAY_SIZE(sh7343_devices));
 }
-__initcall(sh7343_devices_setup);
+arch_initcall(sh7343_devices_setup);
 
 static struct platform_device *sh7343_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index c18f7d09281..1a956b1becc 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -318,7 +318,7 @@ static int __init sh7366_devices_setup(void)
 	return platform_add_devices(sh7366_devices,
 				    ARRAY_SIZE(sh7366_devices));
 }
-__initcall(sh7366_devices_setup);
+arch_initcall(sh7366_devices_setup);
 
 static struct platform_device *sh7366_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index ea524a2da3e..cda76ebf87c 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -359,7 +359,7 @@ static int __init sh7722_devices_setup(void)
 	return platform_add_devices(sh7722_devices,
 				    ARRAY_SIZE(sh7722_devices));
 }
-__initcall(sh7722_devices_setup);
+arch_initcall(sh7722_devices_setup);
 
 static struct platform_device *sh7722_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index e1bb80b2a27..b45dace9539 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -473,7 +473,7 @@ static int __init sh7723_devices_setup(void)
 	return platform_add_devices(sh7723_devices,
 				    ARRAY_SIZE(sh7723_devices));
 }
-__initcall(sh7723_devices_setup);
+arch_initcall(sh7723_devices_setup);
 
 static struct platform_device *sh7723_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index e5ac9eb11c6..a04edaab9a2 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -508,7 +508,7 @@ static int __init sh7724_devices_setup(void)
 	return platform_add_devices(sh7724_devices,
 				    ARRAY_SIZE(sh7724_devices));
 }
-device_initcall(sh7724_devices_setup);
+arch_initcall(sh7724_devices_setup);
 
 static struct platform_device *sh7724_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index f1e0c0d36da..4659fff6b84 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -314,7 +314,7 @@ static int __init sh7763_devices_setup(void)
 	return platform_add_devices(sh7763_devices,
 				    ARRAY_SIZE(sh7763_devices));
 }
-__initcall(sh7763_devices_setup);
+arch_initcall(sh7763_devices_setup);
 
 static struct platform_device *sh7763_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
index 1e86209db28..eead08d89d3 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -368,7 +368,7 @@ static int __init sh7770_devices_setup(void)
 	return platform_add_devices(sh7770_devices,
 				    ARRAY_SIZE(sh7770_devices));
 }
-__initcall(sh7770_devices_setup);
+arch_initcall(sh7770_devices_setup);
 
 static struct platform_device *sh7770_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 715e05b431e..2c901f44695 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -256,7 +256,7 @@ static int __init sh7780_devices_setup(void)
 	return platform_add_devices(sh7780_devices,
 				    ARRAY_SIZE(sh7780_devices));
 }
-__initcall(sh7780_devices_setup);
+arch_initcall(sh7780_devices_setup);
 
 static struct platform_device *sh7780_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index af561402570..7f6c718b6c3 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -263,7 +263,7 @@ static int __init sh7785_devices_setup(void)
 	return platform_add_devices(sh7785_devices,
 				    ARRAY_SIZE(sh7785_devices));
 }
-__initcall(sh7785_devices_setup);
+arch_initcall(sh7785_devices_setup);
 
 static struct platform_device *sh7785_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index b70049470a0..0104a8ec536 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -547,7 +547,7 @@ static int __init sh7786_devices_setup(void)
 	return platform_add_devices(sh7786_devices,
 				    ARRAY_SIZE(sh7786_devices));
 }
-device_initcall(sh7786_devices_setup);
+arch_initcall(sh7786_devices_setup);
 
 void __init plat_early_device_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index 53c65fd9cce..07f078961c7 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -256,7 +256,7 @@ static int __init shx3_devices_setup(void)
 	return platform_add_devices(shx3_devices,
 				    ARRAY_SIZE(shx3_devices));
 }
-__initcall(shx3_devices_setup);
+arch_initcall(shx3_devices_setup);
 
 void __init plat_early_device_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c
index f5ff1ac57fc..6a0f82f7003 100644
--- a/arch/sh/kernel/cpu/sh5/setup-sh5.c
+++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c
@@ -186,7 +186,7 @@ static int __init sh5_devices_setup(void)
 	return platform_add_devices(sh5_devices,
 				    ARRAY_SIZE(sh5_devices));
 }
-__initcall(sh5_devices_setup);
+arch_initcall(sh5_devices_setup);
 
 void __init plat_early_device_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
index 5d888ef53d8..baf2d7d46b0 100644
--- a/arch/sh/kernel/cpu/shmobile/sleep.S
+++ b/arch/sh/kernel/cpu/shmobile/sleep.S
@@ -26,8 +26,30 @@ ENTRY(sh_mobile_standby)
 
 	tst	#SUSP_SH_SF, r0
 	bt	skip_set_sf
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+	/* DBSC: put memory in self-refresh mode */
 
-	/* SDRAM: disable power down and put in self-refresh mode */
+	mov.l	dben_reg, r4
+	mov.l	dben_data0, r1
+	mov.l	r1, @r4
+
+	mov.l	dbrfpdn0_reg, r4
+	mov.l	dbrfpdn0_data0, r1
+	mov.l	r1, @r4
+
+	mov.l	dbcmdcnt_reg, r4
+	mov.l	dbcmdcnt_data0, r1
+	mov.l	r1, @r4
+
+	mov.l	dbcmdcnt_reg, r4
+	mov.l	dbcmdcnt_data1, r1
+	mov.l	r1, @r4
+
+	mov.l	dbrfpdn0_reg, r4
+	mov.l	dbrfpdn0_data1, r1
+	mov.l	r1, @r4
+#else
+	/* SBSC: disable power down and put in self-refresh mode */
 	mov.l	1f, r4
 	mov.l	2f, r1
 	mov.l	@r4, r2
@@ -35,6 +57,7 @@ ENTRY(sh_mobile_standby)
 	mov.l   3f, r3
 	and	r3, r2
 	mov.l	r2, @r4
+#endif
 
 skip_set_sf:
 	tst	#SUSP_SH_SLEEP, r0
@@ -84,7 +107,36 @@ done_sleep:
 	tst	#SUSP_SH_SF, r0
 	bt	skip_restore_sf
 
-	/* SDRAM: set auto-refresh mode */
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+	/* DBSC: put memory in auto-refresh mode */
+
+	mov.l	dbrfpdn0_reg, r4
+	mov.l	dbrfpdn0_data0, r1
+	mov.l	r1, @r4
+
+	/* sleep 140 ns */
+	nop
+	nop
+	nop
+	nop
+
+	mov.l	dbcmdcnt_reg, r4
+	mov.l	dbcmdcnt_data0, r1
+	mov.l	r1, @r4
+
+	mov.l	dbcmdcnt_reg, r4
+	mov.l	dbcmdcnt_data1, r1
+	mov.l	r1, @r4
+
+	mov.l	dben_reg, r4
+	mov.l	dben_data1, r1
+	mov.l	r1, @r4
+
+	mov.l	dbrfpdn0_reg, r4
+	mov.l	dbrfpdn0_data2, r1
+	mov.l	r1, @r4
+#else
+	/* SBSC: set auto-refresh mode */
 	mov.l	1f, r4
 	mov.l	@r4, r2
 	mov.l   4f, r3
@@ -98,15 +150,29 @@ done_sleep:
 	add	r4, r3
 	or	r2, r3
 	mov.l	r3, @r1
+#endif
 skip_restore_sf:
 	rts
 	 nop
 
 	.balign 4
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+dben_reg:	.long	0xfd000010 /* DBEN */
+dben_data0:	.long	0
+dben_data1:	.long	1
+dbrfpdn0_reg:	.long	0xfd000040 /* DBRFPDN0 */
+dbrfpdn0_data0:	.long	0
+dbrfpdn0_data1:	.long	1
+dbrfpdn0_data2:	.long	0x00010000
+dbcmdcnt_reg:	.long	0xfd000014 /* DBCMDCNT */
+dbcmdcnt_data0:	.long	2
+dbcmdcnt_data1:	.long	4
+#else
 1:	.long	0xfe400008 /* SDCR0 */
 2:	.long	0x00000400
 3:	.long	0xffff7fff
 4:	.long	0xfffffbff
+#endif
 5:	.long	0xa4150020 /* STBCR */
 6:	.long   0xfe40001c /* RTCOR */
 7:	.long   0xfe400018 /* RTCNT */
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index cc8ddbdf3d7..71925946f1e 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -15,12 +15,28 @@
 #include <linux/mm.h>
 #include <linux/hardirq.h>
 #include <linux/kprobes.h>
-#include <linux/marker.h>
+#include <linux/perf_counter.h>
 #include <asm/io_trapped.h>
 #include <asm/system.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
 
+static inline int notify_page_fault(struct pt_regs *regs, int trap)
+{
+	int ret = 0;
+
+#ifdef CONFIG_KPROBES
+	if (!user_mode(regs)) {
+		preempt_disable();
+		if (kprobe_running() && kprobe_fault_handler(regs, trap))
+			ret = 1;
+		preempt_enable();
+	}
+#endif
+
+	return ret;
+}
+
 /*
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
@@ -87,13 +103,16 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 		return;
 	}
 
+	mm = tsk->mm;
+
+	if (unlikely(notify_page_fault(regs, lookup_exception_vector())))
+		return;
+
 	/* Only enable interrupts if they were on before the fault */
-	if ((regs->sr & SR_IMASK) != SR_IMASK) {
-		trace_hardirqs_on();
+	if ((regs->sr & SR_IMASK) != SR_IMASK)
 		local_irq_enable();
-	}
 
-	mm = tsk->mm;
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 
 	/*
 	 * If we're in an interrupt or have no user
@@ -141,10 +160,15 @@ survive:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
 
 	up_read(&mm->mmap_sem);
 	return;
@@ -245,22 +269,6 @@ do_sigbus:
 		goto no_context;
 }
 
-static inline int notify_page_fault(struct pt_regs *regs, int trap)
-{
-	int ret = 0;
-
-#ifdef CONFIG_KPROBES
-	if (!user_mode(regs)) {
-		preempt_disable();
-		if (kprobe_running() && kprobe_fault_handler(regs, trap))
-			ret = 1;
-		preempt_enable();
-	}
-#endif
-
-	return ret;
-}
-
 /*
  * Called with interrupts disabled.
  */
@@ -273,12 +281,7 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
 	pmd_t *pmd;
 	pte_t *pte;
 	pte_t entry;
-	int ret = 0;
-
-	if (notify_page_fault(regs, lookup_exception_vector()))
-		goto out;
-
-	ret = 1;
+	int ret = 1;
 
 	/*
 	 * We don't take page faults for P1, P2, and parts of P4, these
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
index 7fbfd5a11ff..17cb7c3adf2 100644
--- a/arch/sh/mm/tlb-sh3.c
+++ b/arch/sh/mm/tlb-sh3.c
@@ -18,7 +18,6 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 
 #include <asm/system.h>
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index fcbb6e135ce..3ce40ea3482 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2000, 2001  Paolo Alberelli
  * Copyright (C) 2003  Richard Curnow (/proc/tlb, bug fixes)
- * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2003 - 2009 Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -20,6 +20,7 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
+#include <linux/perf_counter.h>
 #include <linux/interrupt.h>
 #include <asm/system.h>
 #include <asm/io.h>
@@ -115,6 +116,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 	/* Not an IO address, so reenable interrupts */
 	local_irq_enable();
 
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
 	/*
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
@@ -195,10 +198,16 @@ survive:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
 
 	/* If we get here, the page fault has been handled.  Do the TLB refill
 	   now from the newly-setup PTE, to avoid having to fault again right
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 96041a8d39e..1ff0fd92475 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -15,7 +15,7 @@ quiet_cmd_elftoaout	= ELFTOAOUT $@
 
 ifeq ($(CONFIG_SPARC32),y)
 quiet_cmd_piggy		= PIGGY   $@
-      cmd_piggy		= $(obj)/piggyback_32 $@ $(obj)/System.map $(ROOT_IMG)
+      cmd_piggy		= $(obj)/piggyback_32 $@ System.map $(ROOT_IMG)
 quiet_cmd_btfix		= BTFIX   $@
       cmd_btfix		= $(OBJDUMP) -x vmlinux | $(obj)/btfixupprep > $@
 quiet_cmd_sysmap        = SYSMAP  $(obj)/System.map
@@ -58,7 +58,7 @@ $(obj)/image: $(obj)/btfix.o FORCE
 $(obj)/zImage: $(obj)/image
 	$(call if_changed,strip)
 
-$(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
 
@@ -79,7 +79,7 @@ $(obj)/image: vmlinux FORCE
 	$(call if_changed,strip)
 	@echo '  kernel: $@ is ready'
 
-$(obj)/tftpboot.img: vmlinux $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
 	@echo '  kernel: $@ is ready'
diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c
index c9f500c1a8b..e8dc9adfcd6 100644
--- a/arch/sparc/boot/piggyback_32.c
+++ b/arch/sparc/boot/piggyback_32.c
@@ -70,7 +70,7 @@ void die(char *str)
 int main(int argc,char **argv)
 {
 	static char aout_magic[] = { 0x01, 0x03, 0x01, 0x07 };
-	unsigned char buffer[1024], *q, *r;
+	char buffer[1024], *q, *r;
 	unsigned int i, j, k, start, end, offset;
 	FILE *map;
 	struct stat s;
@@ -84,7 +84,7 @@ int main(int argc,char **argv)
 	while (fgets (buffer, 1024, map)) {
 		if (!strcmp (buffer + 8, " T start\n") || !strcmp (buffer + 16, " T start\n"))
 			start = strtoul (buffer, NULL, 16);
-		else if (!strcmp (buffer + 8, " A end\n") || !strcmp (buffer + 16, " A end\n"))
+		else if (!strcmp (buffer + 8, " A _end\n") || !strcmp (buffer + 16, " A _end\n"))
 			end = strtoul (buffer, NULL, 16);
 	}
 	fclose (map);
diff --git a/arch/sparc/boot/piggyback_64.c b/arch/sparc/boot/piggyback_64.c
index de364bfed0b..c63fd1b6bdd 100644
--- a/arch/sparc/boot/piggyback_64.c
+++ b/arch/sparc/boot/piggyback_64.c
@@ -46,6 +46,7 @@ int main(int argc,char **argv)
 	struct stat s;
 	int image, tail;
 	
+	start = end = 0;
 	if (stat (argv[3], &s) < 0) die (argv[3]);
 	map = fopen (argv[2], "r");
 	if (!map) die(argv[2]);
diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig
index 8bcd27af724..a0f62a808ed 100644
--- a/arch/sparc/configs/sparc32_defconfig
+++ b/arch/sparc/configs/sparc32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Fri Apr 17 04:04:46 2009
+# Linux kernel version: 2.6.31-rc1
+# Tue Aug 18 23:45:52 2009
 #
 # CONFIG_64BIT is not set
 CONFIG_SPARC=y
@@ -17,6 +17,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -74,7 +75,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -87,8 +87,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -97,6 +102,10 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -109,7 +118,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,9 +163,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_SUN_PM=y
 # CONFIG_SPARC_LED is not set
 CONFIG_SERIAL_CONSOLE=y
@@ -264,6 +273,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -281,7 +291,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -335,6 +349,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -358,10 +373,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -379,6 +390,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -387,6 +399,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -401,7 +414,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -426,13 +438,16 @@ CONFIG_SCSI_SUNESP=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -463,6 +478,7 @@ CONFIG_SUNQE=m
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -482,6 +498,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -629,6 +646,11 @@ CONFIG_HW_RANDOM=m
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -668,22 +690,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -776,6 +783,10 @@ CONFIG_RTC_DRV_M48T59=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -799,10 +810,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -985,6 +998,7 @@ CONFIG_KGDB=y
 CONFIG_KGDB_SERIAL_CONSOLE=y
 CONFIG_KGDB_TESTS=y
 # CONFIG_KGDB_TESTS_ON_BOOT is not set
+# CONFIG_KMEMCHECK is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_STACK_DEBUG is not set
 
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index 0123a4c596c..fdddf7a6f72 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Tue Jun 16 04:59:36 2009
+# Linux kernel version: 2.6.31-rc1
+# Tue Aug 18 23:56:02 2009
 #
 CONFIG_64BIT=y
 CONFIG_SPARC=y
@@ -26,6 +26,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -119,6 +120,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -204,7 +210,6 @@ CONFIG_MIGRATION=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=1
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_DEFAULT_MMAP_MIN_ADDR=8192
@@ -410,6 +415,7 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
@@ -562,6 +568,7 @@ CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
 CONFIG_DM_ZERO=m
 # CONFIG_DM_MULTIPATH is not set
 # CONFIG_DM_DELAY is not set
@@ -573,7 +580,11 @@ CONFIG_DM_ZERO=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -667,6 +678,7 @@ CONFIG_E1000E=m
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=m
 CONFIG_BNX2=m
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -773,6 +785,7 @@ CONFIG_MOUSE_SERIAL=y
 # CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -870,6 +883,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
 
@@ -898,13 +912,17 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -959,6 +977,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -994,23 +1013,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1284,7 +1289,6 @@ CONFIG_USB=y
 #
 # Miscellaneous USB options
 #
-CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
@@ -1296,6 +1300,7 @@ CONFIG_USB_DEVICEFS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1374,7 +1379,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1420,6 +1424,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1448,6 +1453,10 @@ CONFIG_RTC_DRV_STARFIRE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1480,11 +1489,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1560,7 +1569,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 CONFIG_SUN_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
 # CONFIG_NLS_CODEPAGE_737 is not set
diff --git a/arch/sparc/include/asm/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h
index 681582d2696..ca2b34456c4 100644
--- a/arch/sparc/include/asm/pgalloc_32.h
+++ b/arch/sparc/include/asm/pgalloc_32.h
@@ -44,8 +44,8 @@ BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long)
 BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *)
 #define free_pmd_fast(pmd)	BTFIXUP_CALL(free_pmd_fast)(pmd)
 
-#define pmd_free(mm, pmd)	free_pmd_fast(pmd)
-#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
+#define pmd_free(mm, pmd)		free_pmd_fast(pmd)
+#define __pmd_free_tlb(tlb, pmd, addr)	pmd_free((tlb)->mm, pmd)
 
 BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *)
 #define pmd_populate(MM, PMD, PTE)        BTFIXUP_CALL(pmd_populate)(PMD, PTE)
@@ -62,7 +62,7 @@ BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *)
 #define pte_free_kernel(mm, pte)	BTFIXUP_CALL(free_pte_fast)(pte)
 
 BTFIXUPDEF_CALL(void, pte_free, pgtable_t )
-#define pte_free(mm, pte)	BTFIXUP_CALL(pte_free)(pte)
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+#define pte_free(mm, pte)		BTFIXUP_CALL(pte_free)(pte)
+#define __pte_free_tlb(tlb, pte, addr)	pte_free((tlb)->mm, pte)
 
 #endif /* _SPARC_PGALLOC_H */
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index b049abf9902..0ff92fa2206 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -726,11 +726,17 @@ extern unsigned long pte_file(pte_t);
 extern pte_t pgoff_to_pte(unsigned long);
 #define PTE_FILE_MAX_BITS	(64UL - PAGE_SHIFT - 1UL)
 
-extern unsigned long *sparc64_valid_addr_bitmap;
+extern unsigned long sparc64_valid_addr_bitmap[];
 
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-#define kern_addr_valid(addr)	\
-	(test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap))
+static inline bool kern_addr_valid(unsigned long addr)
+{
+	unsigned long paddr = __pa(addr);
+
+	if ((paddr >> 41UL) != 0UL)
+		return false;
+	return test_bit(paddr >> 22, sparc64_valid_addr_bitmap);
+}
 
 extern int page_in_phys_avail(unsigned long paddr);
 
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
index 0f7b0e5fb1c..844d73a0340 100644
--- a/arch/sparc/include/asm/thread_info_32.h
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -54,8 +54,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #define INIT_THREAD_INFO(tsk)				\
 {							\
@@ -64,7 +62,7 @@ struct thread_info {
 	.exec_domain	=	&default_exec_domain,	\
 	.flags		=	0,			\
 	.cpu		=	0,			\
-	.preempt_count	=	1,			\
+	.preempt_count	=	INIT_PREEMPT_COUNT,	\
 	.restart_block	= {				\
 		.fn	=	do_no_restart_syscall,	\
 	},						\
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index 65865726b28..1b45a7bbe40 100644
--- a/arch/sparc/include/asm/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -125,8 +125,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 
@@ -135,7 +133,7 @@ struct thread_info {
 	.task		=	&tsk,			\
 	.flags		= ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT,	\
 	.exec_domain	=	&default_exec_domain,	\
-	.preempt_count	=	1,			\
+	.preempt_count	=	INIT_PREEMPT_COUNT,	\
 	.restart_block	= {				\
 		.fn	=	do_no_restart_syscall,	\
 	},						\
diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h
index ee38e731bfa..dca406b9b6f 100644
--- a/arch/sparc/include/asm/tlb_64.h
+++ b/arch/sparc/include/asm/tlb_64.h
@@ -100,9 +100,9 @@ static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page)
 }
 
 #define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0)
-#define pte_free_tlb(mp, ptepage) pte_free((mp)->mm, ptepage)
-#define pmd_free_tlb(mp, pmdp) pmd_free((mp)->mm, pmdp)
-#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp)
+#define pte_free_tlb(mp, ptepage, addr) pte_free((mp)->mm, ptepage)
+#define pmd_free_tlb(mp, pmdp, addr) pmd_free((mp)->mm, pmdp)
+#define pud_free_tlb(tlb,pudp, addr) __pud_free_tlb(tlb,pudp,addr)
 
 #define tlb_migrate_finish(mm)	do { } while (0)
 #define tlb_start_vma(tlb, vma) do { } while (0)
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index bd075054942..8daab33fc17 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -20,7 +20,6 @@
 #include <linux/delay.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/bootmem.h>
 #include <linux/irq.h>
 
 #include <asm/ptrace.h>
@@ -887,7 +886,7 @@ void notrace init_irqwork_curcpu(void)
  * Therefore you cannot make any OBP calls, not even prom_printf,
  * from these two routines.
  */
-static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type, unsigned long qmask)
+static void __cpuinit notrace register_one_mondo(unsigned long paddr, unsigned long type, unsigned long qmask)
 {
 	unsigned long num_entries = (qmask + 1) / 64;
 	unsigned long status;
@@ -914,25 +913,19 @@ void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu)
 			   tb->nonresum_qmask);
 }
 
-static void __init alloc_one_mondo(unsigned long *pa_ptr, unsigned long qmask)
-{
-	unsigned long size = PAGE_ALIGN(qmask + 1);
-	void *p = __alloc_bootmem(size, size, 0);
-	if (!p) {
-		prom_printf("SUN4V: Error, cannot allocate mondo queue.\n");
-		prom_halt();
-	}
-
-	*pa_ptr = __pa(p);
-}
-
-static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask)
+/* Each queue region must be a power of 2 multiple of 64 bytes in
+ * size.  The base real address must be aligned to the size of the
+ * region.  Thus, an 8KB queue must be 8KB aligned, for example.
+ */
+static void __init alloc_one_queue(unsigned long *pa_ptr, unsigned long qmask)
 {
 	unsigned long size = PAGE_ALIGN(qmask + 1);
-	void *p = __alloc_bootmem(size, size, 0);
+	unsigned long order = get_order(size);
+	unsigned long p;
 
+	p = __get_free_pages(GFP_KERNEL, order);
 	if (!p) {
-		prom_printf("SUN4V: Error, cannot allocate kbuf page.\n");
+		prom_printf("SUN4V: Error, cannot allocate queue.\n");
 		prom_halt();
 	}
 
@@ -942,11 +935,11 @@ static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask)
 static void __init init_cpu_send_mondo_info(struct trap_per_cpu *tb)
 {
 #ifdef CONFIG_SMP
-	void *page;
+	unsigned long page;
 
 	BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64));
 
-	page = alloc_bootmem_pages(PAGE_SIZE);
+	page = get_zeroed_page(GFP_KERNEL);
 	if (!page) {
 		prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n");
 		prom_halt();
@@ -965,13 +958,13 @@ static void __init sun4v_init_mondo_queues(void)
 	for_each_possible_cpu(cpu) {
 		struct trap_per_cpu *tb = &trap_block[cpu];
 
-		alloc_one_mondo(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
-		alloc_one_mondo(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
-		alloc_one_mondo(&tb->resum_mondo_pa, tb->resum_qmask);
-		alloc_one_kbuf(&tb->resum_kernel_buf_pa, tb->resum_qmask);
-		alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
-		alloc_one_kbuf(&tb->nonresum_kernel_buf_pa,
-			       tb->nonresum_qmask);
+		alloc_one_queue(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
+		alloc_one_queue(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
+		alloc_one_queue(&tb->resum_mondo_pa, tb->resum_qmask);
+		alloc_one_queue(&tb->resum_kernel_buf_pa, tb->resum_qmask);
+		alloc_one_queue(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
+		alloc_one_queue(&tb->nonresum_kernel_buf_pa,
+				tb->nonresum_qmask);
 	}
 }
 
@@ -999,7 +992,7 @@ void __init init_IRQ(void)
 	kill_prom_timer();
 
 	size = sizeof(struct ino_bucket) * NUM_IVECS;
-	ivector_table = alloc_bootmem(size);
+	ivector_table = kzalloc(size, GFP_KERNEL);
 	if (!ivector_table) {
 		prom_printf("Fatal error, cannot allocate ivector_table\n");
 		prom_halt();
diff --git a/arch/sparc/kernel/ktlb.S b/arch/sparc/kernel/ktlb.S
index cef8defcd7a..3ea6e8cde8c 100644
--- a/arch/sparc/kernel/ktlb.S
+++ b/arch/sparc/kernel/ktlb.S
@@ -151,12 +151,46 @@ kvmap_dtlb_4v:
 	 * Must preserve %g1 and %g6 (TAG).
 	 */
 kvmap_dtlb_tsb4m_miss:
-	sethi		%hi(kpte_linear_bitmap), %g2
-	or		%g2, %lo(kpte_linear_bitmap), %g2
+	/* Clear the PAGE_OFFSET top virtual bits, shift
+	 * down to get PFN, and make sure PFN is in range.
+	 */
+	sllx		%g4, 21, %g5
 
-	/* Clear the PAGE_OFFSET top virtual bits, then shift
-	 * down to get a 256MB physical address index.
+	/* Check to see if we know about valid memory at the 4MB
+	 * chunk this physical address will reside within.
 	 */
+	srlx		%g5, 21 + 41, %g2
+	brnz,pn		%g2, kvmap_dtlb_longpath
+	 nop
+
+	/* This unconditional branch and delay-slot nop gets patched
+	 * by the sethi sequence once the bitmap is properly setup.
+	 */
+	.globl		valid_addr_bitmap_insn
+valid_addr_bitmap_insn:
+	ba,pt		%xcc, 2f
+	 nop
+	.subsection	2
+	.globl		valid_addr_bitmap_patch
+valid_addr_bitmap_patch:
+	sethi		%hi(sparc64_valid_addr_bitmap), %g7
+	or		%g7, %lo(sparc64_valid_addr_bitmap), %g7
+	.previous
+
+	srlx		%g5, 21 + 22, %g2
+	srlx		%g2, 6, %g5
+	and		%g2, 63, %g2
+	sllx		%g5, 3, %g5
+	ldx		[%g7 + %g5], %g5
+	mov		1, %g7
+	sllx		%g7, %g2, %g7
+	andcc		%g5, %g7, %g0
+	be,pn		%xcc, kvmap_dtlb_longpath
+
+2:	 sethi		%hi(kpte_linear_bitmap), %g2
+	or		%g2, %lo(kpte_linear_bitmap), %g2
+
+	/* Get the 256MB physical address index. */
 	sllx		%g4, 21, %g5
 	mov		1, %g7
 	srlx		%g5, 21 + 28, %g5
diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index 2c0cc72d295..b75bf502cd4 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -103,7 +103,7 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
 	}
 	if (!touched && __get_cpu_var(last_irq_sum) == sum) {
 		local_inc(&__get_cpu_var(alert_counter));
-		if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz)
+		if (local_read(&__get_cpu_var(alert_counter)) == 30 * nmi_hz)
 			die_nmi("BUG: NMI Watchdog detected LOCKUP",
 				regs, panic_on_timeout);
 	} else {
diff --git a/arch/sparc/kernel/ptrace_32.c b/arch/sparc/kernel/ptrace_32.c
index 8ce6285a06d..7e3dfd9bb97 100644
--- a/arch/sparc/kernel/ptrace_32.c
+++ b/arch/sparc/kernel/ptrace_32.c
@@ -16,7 +16,6 @@
 #include <linux/ptrace.h>
 #include <linux/user.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/security.h>
 #include <linux/signal.h>
 #include <linux/regset.h>
diff --git a/arch/sparc/kernel/ptrace_64.c b/arch/sparc/kernel/ptrace_64.c
index a941c610e7c..4ae91dc2feb 100644
--- a/arch/sparc/kernel/ptrace_64.c
+++ b/arch/sparc/kernel/ptrace_64.c
@@ -17,7 +17,6 @@
 #include <linux/ptrace.h>
 #include <linux/user.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/security.h>
 #include <linux/seccomp.h>
 #include <linux/audit.h>
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index fa44eaf8d89..3691907a43b 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1499,7 +1499,7 @@ void __init setup_per_cpu_areas(void)
 	dyn_size = pcpur_size - static_size - PERCPU_MODULE_RESERVE;
 
 
-	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
+	ptrs_size = PFN_ALIGN(nr_cpu_ids * sizeof(pcpur_ptrs[0]));
 	pcpur_ptrs = alloc_bootmem(ptrs_size);
 
 	for_each_possible_cpu(cpu) {
@@ -1514,7 +1514,7 @@ void __init setup_per_cpu_areas(void)
 
 	/* allocate address and map */
 	vm.flags = VM_ALLOC;
-	vm.size = num_possible_cpus() * PCPU_CHUNK_SIZE;
+	vm.size = nr_cpu_ids * PCPU_CHUNK_SIZE;
 	vm_area_register_early(&vm, PCPU_CHUNK_SIZE);
 
 	for_each_possible_cpu(cpu) {
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index 54fb02468f0..68791cad7b7 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -162,9 +162,6 @@ extern void cpu_panic(void);
  */
  
 extern struct linux_prom_registers smp_penguin_ctable;
-extern unsigned long trapbase_cpu1[];
-extern unsigned long trapbase_cpu2[];
-extern unsigned long trapbase_cpu3[];
 
 void __init smp4d_boot_cpus(void)
 {
@@ -235,25 +232,6 @@ void __init smp4d_smp_done(void)
 	*prev = first;
 	local_flush_cache_all();
 
-	/* Free unneeded trap tables */
-	ClearPageReserved(virt_to_page(trapbase_cpu1));
-	init_page_count(virt_to_page(trapbase_cpu1));
-	free_page((unsigned long)trapbase_cpu1);
-	totalram_pages++;
-	num_physpages++;
-
-	ClearPageReserved(virt_to_page(trapbase_cpu2));
-	init_page_count(virt_to_page(trapbase_cpu2));
-	free_page((unsigned long)trapbase_cpu2);
-	totalram_pages++;
-	num_physpages++;
-
-	ClearPageReserved(virt_to_page(trapbase_cpu3));
-	init_page_count(virt_to_page(trapbase_cpu3));
-	free_page((unsigned long)trapbase_cpu3);
-	totalram_pages++;
-	num_physpages++;
-
 	/* Ok, they are spinning and ready to go. */
 	smp_processors_ready = 1;
 	sun4d_distribute_irqs();
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index 960b113d000..762d6eedd94 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -121,9 +121,6 @@ void __cpuinit smp4m_callin(void)
  */
  
 extern struct linux_prom_registers smp_penguin_ctable;
-extern unsigned long trapbase_cpu1[];
-extern unsigned long trapbase_cpu2[];
-extern unsigned long trapbase_cpu3[];
 
 void __init smp4m_boot_cpus(void)
 {
@@ -193,29 +190,6 @@ void __init smp4m_smp_done(void)
 	*prev = first;
 	local_flush_cache_all();
 
-	/* Free unneeded trap tables */
-	if (!cpu_isset(1, cpu_present_map)) {
-		ClearPageReserved(virt_to_page(trapbase_cpu1));
-		init_page_count(virt_to_page(trapbase_cpu1));
-		free_page((unsigned long)trapbase_cpu1);
-		totalram_pages++;
-		num_physpages++;
-	}
-	if (!cpu_isset(2, cpu_present_map)) {
-		ClearPageReserved(virt_to_page(trapbase_cpu2));
-		init_page_count(virt_to_page(trapbase_cpu2));
-		free_page((unsigned long)trapbase_cpu2);
-		totalram_pages++;
-		num_physpages++;
-	}
-	if (!cpu_isset(3, cpu_present_map)) {
-		ClearPageReserved(virt_to_page(trapbase_cpu3));
-		init_page_count(virt_to_page(trapbase_cpu3));
-		free_page((unsigned long)trapbase_cpu3);
-		totalram_pages++;
-		num_physpages++;
-	}
-
 	/* Ok, they are spinning and ready to go. */
 }
 
diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S
index f061c4dda9e..aed94869ad6 100644
--- a/arch/sparc/kernel/sys32.S
+++ b/arch/sparc/kernel/sys32.S
@@ -134,10 +134,12 @@ SIGN1(sys32_getpeername, sys_getpeername, %o0)
 SIGN1(sys32_getsockname, sys_getsockname, %o0)
 SIGN2(sys32_ioprio_get, sys_ioprio_get, %o0, %o1)
 SIGN3(sys32_ioprio_set, sys_ioprio_set, %o0, %o1, %o2)
-SIGN2(sys32_splice, sys_splice, %o0, %o1)
+SIGN2(sys32_splice, sys_splice, %o0, %o2)
 SIGN2(sys32_sync_file_range, compat_sync_file_range, %o0, %o5)
 SIGN2(sys32_tee, sys_tee, %o0, %o1)
 SIGN1(sys32_vmsplice, compat_sys_vmsplice, %o0)
+SIGN1(sys32_truncate, sys_truncate, %o1)
+SIGN1(sys32_ftruncate, sys_ftruncate, %o1)
 
 	.globl		sys32_mmap2
 sys32_mmap2:
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 6b3ee88e253..2ee7250ba7a 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -43,8 +43,8 @@ sys_call_table32:
 /*110*/	.word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall
 	.word sys32_getgroups, compat_sys_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd
 /*120*/	.word compat_sys_readv, compat_sys_writev, compat_sys_settimeofday, sys_fchown16, sys_fchmod
-	.word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate
-/*130*/	.word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
+	.word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys32_truncate
+/*130*/	.word sys32_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
 	.word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
 /*140*/	.word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit
 	.word compat_sys_setrlimit, sys_pivot_root, sys32_prctl, sys_pciconfig_read, sys_pciconfig_write
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 5c12e79b4bd..da1218e8ee8 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -11,7 +11,6 @@
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/string.h>
diff --git a/arch/sparc/kernel/traps_32.c b/arch/sparc/kernel/traps_32.c
index 358283341b4..c0490c7bbde 100644
--- a/arch/sparc/kernel/traps_32.c
+++ b/arch/sparc/kernel/traps_32.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kdebug.h>
 
 #include <asm/delay.h>
diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c
index 753d128ed15..c28c71449a6 100644
--- a/arch/sparc/kernel/vio.c
+++ b/arch/sparc/kernel/vio.c
@@ -224,7 +224,12 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
 	if (!strcmp(type, "domain-services-port"))
 		bus_id_name = "ds";
 
-	if (strlen(bus_id_name) >= BUS_ID_SIZE - 4) {
+	/*
+	 * 20 char is the old driver-core name size limit, which is no more.
+	 * This check can probably be removed after review and possible
+	 * adaption of the vio users name length handling.
+	 */
+	if (strlen(bus_id_name) >= 20 - 4) {
 		printk(KERN_ERR "VIO: bus_id_name [%s] is too long.\n",
 		       bus_id_name);
 		return NULL;
diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index a5e30c642ee..b99f81c4906 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -319,9 +319,10 @@ no_context:
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	printk("VM: killing process %s\n", tsk->comm);
-	if (from_user)
-		do_group_exit(SIGKILL);
+	if (from_user) {
+		pagefault_out_of_memory();
+		return;
+	}
 	goto no_context;
 
 do_sigbus:
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index e5620b27c8b..43b0da96a4f 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -447,9 +447,10 @@ handle_kernel_fault:
 out_of_memory:
 	insn = get_fault_insn(regs, insn);
 	up_read(&mm->mmap_sem);
-	printk("VM: killing process %s\n", current->comm);
-	if (!(regs->tstate & TSTATE_PRIV))
-		do_group_exit(SIGKILL);
+	if (!(regs->tstate & TSTATE_PRIV)) {
+		pagefault_out_of_memory();
+		return;
+	}
 	goto handle_kernel_fault;
 
 intr_or_no_mm:
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index ed6be6ba2f4..a70a5e1904d 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -145,7 +145,8 @@ static void __init read_obp_memory(const char *property,
 	     cmp_p64, NULL);
 }
 
-unsigned long *sparc64_valid_addr_bitmap __read_mostly;
+unsigned long sparc64_valid_addr_bitmap[VALID_ADDR_BITMAP_BYTES /
+					sizeof(unsigned long)];
 EXPORT_SYMBOL(sparc64_valid_addr_bitmap);
 
 /* Kernel physical address base and size in bytes.  */
@@ -1874,7 +1875,7 @@ static int pavail_rescan_ents __initdata;
  * memory list again, and make sure it provides at least as much
  * memory as 'pavail' does.
  */
-static void __init setup_valid_addr_bitmap_from_pavail(void)
+static void __init setup_valid_addr_bitmap_from_pavail(unsigned long *bitmap)
 {
 	int i;
 
@@ -1897,8 +1898,7 @@ static void __init setup_valid_addr_bitmap_from_pavail(void)
 
 				if (new_start <= old_start &&
 				    new_end >= (old_start + PAGE_SIZE)) {
-					set_bit(old_start >> 22,
-						sparc64_valid_addr_bitmap);
+					set_bit(old_start >> 22, bitmap);
 					goto do_next_page;
 				}
 			}
@@ -1919,20 +1919,21 @@ static void __init setup_valid_addr_bitmap_from_pavail(void)
 	}
 }
 
+static void __init patch_tlb_miss_handler_bitmap(void)
+{
+	extern unsigned int valid_addr_bitmap_insn[];
+	extern unsigned int valid_addr_bitmap_patch[];
+
+	valid_addr_bitmap_insn[1] = valid_addr_bitmap_patch[1];
+	mb();
+	valid_addr_bitmap_insn[0] = valid_addr_bitmap_patch[0];
+	flushi(&valid_addr_bitmap_insn[0]);
+}
+
 void __init mem_init(void)
 {
 	unsigned long codepages, datapages, initpages;
 	unsigned long addr, last;
-	int i;
-
-	i = last_valid_pfn >> ((22 - PAGE_SHIFT) + 6);
-	i += 1;
-	sparc64_valid_addr_bitmap = (unsigned long *) alloc_bootmem(i << 3);
-	if (sparc64_valid_addr_bitmap == NULL) {
-		prom_printf("mem_init: Cannot alloc valid_addr_bitmap.\n");
-		prom_halt();
-	}
-	memset(sparc64_valid_addr_bitmap, 0, i << 3);
 
 	addr = PAGE_OFFSET + kern_base;
 	last = PAGE_ALIGN(kern_size) + addr;
@@ -1941,15 +1942,19 @@ void __init mem_init(void)
 		addr += PAGE_SIZE;
 	}
 
-	setup_valid_addr_bitmap_from_pavail();
+	setup_valid_addr_bitmap_from_pavail(sparc64_valid_addr_bitmap);
+	patch_tlb_miss_handler_bitmap();
 
 	high_memory = __va(last_valid_pfn << PAGE_SHIFT);
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-	for_each_online_node(i) {
-		if (NODE_DATA(i)->node_spanned_pages != 0) {
-			totalram_pages +=
-				free_all_bootmem_node(NODE_DATA(i));
+	{
+		int i;
+		for_each_online_node(i) {
+			if (NODE_DATA(i)->node_spanned_pages != 0) {
+				totalram_pages +=
+					free_all_bootmem_node(NODE_DATA(i));
+			}
 		}
 	}
 #else
diff --git a/arch/sparc/mm/init_64.h b/arch/sparc/mm/init_64.h
index 16063870a48..c2f772dbd55 100644
--- a/arch/sparc/mm/init_64.h
+++ b/arch/sparc/mm/init_64.h
@@ -5,10 +5,13 @@
  * marked non-static so that assembler code can get at them.
  */
 
-#define MAX_PHYS_ADDRESS	(1UL << 42UL)
-#define KPTE_BITMAP_CHUNK_SZ	(256UL * 1024UL * 1024UL)
+#define MAX_PHYS_ADDRESS	(1UL << 41UL)
+#define KPTE_BITMAP_CHUNK_SZ		(256UL * 1024UL * 1024UL)
 #define KPTE_BITMAP_BYTES	\
 	((MAX_PHYS_ADDRESS / KPTE_BITMAP_CHUNK_SZ) / 8)
+#define VALID_ADDR_BITMAP_CHUNK_SZ	(4UL * 1024UL * 1024UL)
+#define VALID_ADDR_BITMAP_BYTES	\
+	((MAX_PHYS_ADDRESS / VALID_ADDR_BITMAP_CHUNK_SZ) / 8)
 
 extern unsigned long kern_linear_pte_xor[2];
 extern unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)];
diff --git a/arch/sparc/prom/misc_64.c b/arch/sparc/prom/misc_64.c
index eedffb4fec2..39fc6af21b7 100644
--- a/arch/sparc/prom/misc_64.c
+++ b/arch/sparc/prom/misc_64.c
@@ -88,7 +88,7 @@ void prom_cmdline(void)
 /* Drop into the prom, but completely terminate the program.
  * No chance of continuing.
  */
-void prom_halt(void)
+void notrace prom_halt(void)
 {
 #ifdef CONFIG_SUN_LDOMS
 	if (ldom_domaining_enabled)
diff --git a/arch/sparc/prom/printf.c b/arch/sparc/prom/printf.c
index 660943ee4c2..ca869266b9f 100644
--- a/arch/sparc/prom/printf.c
+++ b/arch/sparc/prom/printf.c
@@ -14,14 +14,14 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/compiler.h>
 
 #include <asm/openprom.h>
 #include <asm/oplib.h>
 
 static char ppbuf[1024];
 
-void
-prom_write(const char *buf, unsigned int n)
+void notrace prom_write(const char *buf, unsigned int n)
 {
 	char ch;
 
@@ -33,8 +33,7 @@ prom_write(const char *buf, unsigned int n)
 	}
 }
 
-void
-prom_printf(const char *fmt, ...)
+void notrace prom_printf(const char *fmt, ...)
 {
 	va_list args;
 	int i;
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index 5ec17563142..dd2aadc14af 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -30,7 +30,6 @@ static void slip_init(struct net_device *dev, void *data)
 
 	slip_proto_init(&spri->slip);
 
-	dev->init = NULL;
 	dev->hard_header_len = 0;
 	dev->header_ops = NULL;
 	dev->addr_len = 0;
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index f15a6e7654f..e376284f0fb 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -32,7 +32,6 @@ void slirp_init(struct net_device *dev, void *data)
 
 	slip_proto_init(&spri->slip);
 
-	dev->init = NULL;
 	dev->hard_header_len = 0;
 	dev->header_ops = NULL;
 	dev->addr_len = 0;
diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h
index 90fc708b320..378de4bbf49 100644
--- a/arch/um/include/asm/dma-mapping.h
+++ b/arch/um/include/asm/dma-mapping.h
@@ -79,14 +79,14 @@ dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 }
 
 static inline void
-dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
 		enum dma_data_direction direction)
 {
 	BUG();
 }
 
 static inline void
-dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
 	    enum dma_data_direction direction)
 {
 	BUG();
diff --git a/arch/um/include/asm/pgalloc.h b/arch/um/include/asm/pgalloc.h
index 718984359f8..32c8ce4e151 100644
--- a/arch/um/include/asm/pgalloc.h
+++ b/arch/um/include/asm/pgalloc.h
@@ -40,7 +40,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte, address)		\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb),(pte));			\
@@ -53,7 +53,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	free_page((unsigned long)pmd);
 }
 
-#define __pmd_free_tlb(tlb,x)   tlb_remove_page((tlb),virt_to_page(x))
+#define __pmd_free_tlb(tlb,x, address)   tlb_remove_page((tlb),virt_to_page(x))
 #endif
 
 #define check_pgt_cache()	do { } while (0)
diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h
index 62274ab9471..fd911f85536 100644
--- a/arch/um/include/asm/thread_info.h
+++ b/arch/um/include/asm/thread_info.h
@@ -32,7 +32,7 @@ struct thread_info {
 	.exec_domain =	&default_exec_domain,	\
 	.flags =		0,		\
 	.cpu =		0,			\
-	.preempt_count =	1,		\
+	.preempt_count = INIT_PREEMPT_COUNT,	\
 	.addr_limit =	KERNEL_DS,		\
 	.restart_block =  {			\
 		.fn =  do_no_restart_syscall,	\
diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h
index 5240fa1c5e0..660caedac9e 100644
--- a/arch/um/include/asm/tlb.h
+++ b/arch/um/include/asm/tlb.h
@@ -116,11 +116,11 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
 		__tlb_remove_tlb_entry(tlb, ptep, address);	\
 	} while (0)
 
-#define pte_free_tlb(tlb, ptep) __pte_free_tlb(tlb, ptep)
+#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr)
 
-#define pud_free_tlb(tlb, pudp) __pud_free_tlb(tlb, pudp)
+#define pud_free_tlb(tlb, pudp, addr) __pud_free_tlb(tlb, pudp, addr)
 
-#define pmd_free_tlb(tlb, pmdp) __pmd_free_tlb(tlb, pmdp)
+#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr)
 
 #define tlb_migrate_finish(mm) do {} while (0)
 
diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c
index 56d43d0a396..0960de54495 100644
--- a/arch/um/kernel/sysrq.c
+++ b/arch/um/kernel/sysrq.c
@@ -70,8 +70,8 @@ void show_stack(struct task_struct *task, unsigned long *esp)
 		if (kstack_end(stack))
 			break;
 		if (i && ((i % 8) == 0))
-			printk("\n" KERN_INFO "       ");
-		printk("%08lx ", *stack++);
+			printk(KERN_INFO "       ");
+		printk(KERN_CONT "%08lx ", *stack++);
 	}
 
 	show_trace(task, esp);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d1430ef6b4f..13ffa5df37d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -24,6 +24,7 @@ config X86
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_PERF_COUNTERS if (!M386 && !M486)
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -742,7 +743,6 @@ config X86_UP_IOAPIC
 config X86_LOCAL_APIC
 	def_bool y
 	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
-	select HAVE_PERF_COUNTERS if (!M386 && !M486)
 
 config X86_IO_APIC
 	def_bool y
@@ -1913,25 +1913,26 @@ config DMAR_DEFAULT_ON
 	  recommended you say N here while the DMAR code remains
 	  experimental.
 
-config DMAR_GFX_WA
-	def_bool y
-	prompt "Support for Graphics workaround"
+config DMAR_BROKEN_GFX_WA
+	def_bool n
+	prompt "Workaround broken graphics drivers (going away soon)"
 	depends on DMAR
 	---help---
 	  Current Graphics drivers tend to use physical address
 	  for DMA and avoid using DMA APIs. Setting this config
 	  option permits the IOMMU driver to set a unity map for
 	  all the OS-visible memory. Hence the driver can continue
-	  to use physical addresses for DMA.
+	  to use physical addresses for DMA, at least until this
+	  option is removed in the 2.6.32 kernel.
 
 config DMAR_FLOPPY_WA
 	def_bool y
 	depends on DMAR
 	---help---
-	  Floppy disk drivers are know to bypass DMA API calls
+	  Floppy disk drivers are known to bypass DMA API calls
 	  thereby failing to work when IOMMU is enabled. This
 	  workaround will setup a 1:1 mapping for the first
-	  16M to make floppy (an ISA device) work.
+	  16MiB to make floppy (an ISA device) work.
 
 config INTR_REMAP
 	bool "Support for Interrupt Remapping (EXPERIMENTAL)"
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index e2ff504b4dd..f8ed0658404 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -4,7 +4,7 @@
 # create a compressed vmlinux image from the original vmlinux
 #
 
-targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
+targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
 
 KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c
index d660be49236..49e0c18833e 100644
--- a/arch/x86/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
@@ -37,14 +37,13 @@ static int set_bios_mode(u8 mode)
 	ireg.al = mode;		/* AH=0x00 Set Video Mode */
 	intcall(0x10, &ireg, NULL);
 
-
 	ireg.ah = 0x0f;		/* Get Current Video Mode */
 	intcall(0x10, &ireg, &oreg);
 
 	do_restore = 1;		/* Assume video contents were lost */
 
 	/* Not all BIOSes are clean with the top bit */
-	new_mode = ireg.al & 0x7f;
+	new_mode = oreg.al & 0x7f;
 
 	if (new_mode == mode)
 		return 0;	/* Mode change OK */
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index c700147d6ff..275dd177f19 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -45,7 +45,7 @@ static int vesa_probe(void)
 	ireg.di = (size_t)&vginfo;
 	intcall(0x10, &ireg, &oreg);
 
-	if (ireg.ax != 0x004f ||
+	if (oreg.ax != 0x004f ||
 	    vginfo.signature != VESA_MAGIC ||
 	    vginfo.version < 0x0102)
 		return 0;	/* Not present */
@@ -70,7 +70,7 @@ static int vesa_probe(void)
 		ireg.di = (size_t)&vminfo;
 		intcall(0x10, &ireg, &oreg);
 
-		if (ireg.ax != 0x004f)
+		if (oreg.ax != 0x004f)
 			continue;
 
 		if ((vminfo.mode_attr & 0x15) == 0x05) {
diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index 2503d4e64c2..dc5a667ff79 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -19,7 +19,10 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v)		((v)->counter)
+static inline int atomic_read(const atomic_t *v)
+{
+	return v->counter;
+}
 
 /**
  * atomic_set - set atomic variable
@@ -28,7 +31,10 @@
  *
  * Atomically sets the value of @v to @i.
  */
-#define atomic_set(v, i)	(((v)->counter) = (i))
+static inline void atomic_set(atomic_t *v, int i)
+{
+	v->counter = i;
+}
 
 /**
  * atomic_add - add integer to atomic variable
@@ -200,8 +206,15 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	return atomic_add_return(-i, v);
 }
 
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	return cmpxchg(&v->counter, old, new);
+}
+
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+	return xchg(&v->counter, new);
+}
 
 /**
  * atomic_add_unless - add unless the number is already a given value
@@ -250,45 +263,12 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 /* An 64bit atomic type */
 
 typedef struct {
-	unsigned long long counter;
+	u64 __aligned(8) counter;
 } atomic64_t;
 
 #define ATOMIC64_INIT(val)	{ (val) }
 
-/**
- * atomic64_read - read atomic64 variable
- * @ptr: pointer of type atomic64_t
- *
- * Atomically reads the value of @v.
- * Doesn't imply a read memory barrier.
- */
-#define __atomic64_read(ptr)		((ptr)->counter)
-
-static inline unsigned long long
-cmpxchg8b(unsigned long long *ptr, unsigned long long old, unsigned long long new)
-{
-	asm volatile(
-
-		LOCK_PREFIX "cmpxchg8b (%[ptr])\n"
-
-		     :		"=A" (old)
-
-		     : [ptr]	"D" (ptr),
-				"A" (old),
-				"b" (ll_low(new)),
-				"c" (ll_high(new))
-
-		     : "memory");
-
-	return old;
-}
-
-static inline unsigned long long
-atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val,
-		 unsigned long long new_val)
-{
-	return cmpxchg8b(&ptr->counter, old_val, new_val);
-}
+extern u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val);
 
 /**
  * atomic64_xchg - xchg atomic64 variable
@@ -298,18 +278,7 @@ atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val,
  * Atomically xchgs the value of @ptr to @new_val and returns
  * the old value.
  */
-
-static inline unsigned long long
-atomic64_xchg(atomic64_t *ptr, unsigned long long new_val)
-{
-	unsigned long long old_val;
-
-	do {
-		old_val = atomic_read(ptr);
-	} while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
-
-	return old_val;
-}
+extern u64 atomic64_xchg(atomic64_t *ptr, u64 new_val);
 
 /**
  * atomic64_set - set atomic64 variable
@@ -318,10 +287,7 @@ atomic64_xchg(atomic64_t *ptr, unsigned long long new_val)
  *
  * Atomically sets the value of @ptr to @new_val.
  */
-static inline void atomic64_set(atomic64_t *ptr, unsigned long long new_val)
-{
-	atomic64_xchg(ptr, new_val);
-}
+extern void atomic64_set(atomic64_t *ptr, u64 new_val);
 
 /**
  * atomic64_read - read atomic64 variable
@@ -329,17 +295,30 @@ static inline void atomic64_set(atomic64_t *ptr, unsigned long long new_val)
  *
  * Atomically reads the value of @ptr and returns it.
  */
-static inline unsigned long long atomic64_read(atomic64_t *ptr)
+static inline u64 atomic64_read(atomic64_t *ptr)
 {
-	unsigned long long curr_val;
-
-	do {
-		curr_val = __atomic64_read(ptr);
-	} while (atomic64_cmpxchg(ptr, curr_val, curr_val) != curr_val);
-
-	return curr_val;
+	u64 res;
+
+	/*
+	 * Note, we inline this atomic64_t primitive because
+	 * it only clobbers EAX/EDX and leaves the others
+	 * untouched. We also (somewhat subtly) rely on the
+	 * fact that cmpxchg8b returns the current 64-bit value
+	 * of the memory location we are touching:
+	 */
+	asm volatile(
+		"mov %%ebx, %%eax\n\t"
+		"mov %%ecx, %%edx\n\t"
+		LOCK_PREFIX "cmpxchg8b %1\n"
+			: "=&A" (res)
+			: "m" (*ptr)
+		);
+
+	return res;
 }
 
+extern u64 atomic64_read(atomic64_t *ptr);
+
 /**
  * atomic64_add_return - add and return
  * @delta: integer value to add
@@ -347,34 +326,14 @@ static inline unsigned long long atomic64_read(atomic64_t *ptr)
  *
  * Atomically adds @delta to @ptr and returns @delta + *@ptr
  */
-static inline unsigned long long
-atomic64_add_return(unsigned long long delta, atomic64_t *ptr)
-{
-	unsigned long long old_val, new_val;
-
-	do {
-		old_val = atomic_read(ptr);
-		new_val = old_val + delta;
-
-	} while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
-
-	return new_val;
-}
-
-static inline long atomic64_sub_return(unsigned long long delta, atomic64_t *ptr)
-{
-	return atomic64_add_return(-delta, ptr);
-}
+extern u64 atomic64_add_return(u64 delta, atomic64_t *ptr);
 
-static inline long atomic64_inc_return(atomic64_t *ptr)
-{
-	return atomic64_add_return(1, ptr);
-}
-
-static inline long atomic64_dec_return(atomic64_t *ptr)
-{
-	return atomic64_sub_return(1, ptr);
-}
+/*
+ * Other variants with different arithmetic operators:
+ */
+extern u64 atomic64_sub_return(u64 delta, atomic64_t *ptr);
+extern u64 atomic64_inc_return(atomic64_t *ptr);
+extern u64 atomic64_dec_return(atomic64_t *ptr);
 
 /**
  * atomic64_add - add integer to atomic64 variable
@@ -383,10 +342,7 @@ static inline long atomic64_dec_return(atomic64_t *ptr)
  *
  * Atomically adds @delta to @ptr.
  */
-static inline void atomic64_add(unsigned long long delta, atomic64_t *ptr)
-{
-	atomic64_add_return(delta, ptr);
-}
+extern void atomic64_add(u64 delta, atomic64_t *ptr);
 
 /**
  * atomic64_sub - subtract the atomic64 variable
@@ -395,10 +351,7 @@ static inline void atomic64_add(unsigned long long delta, atomic64_t *ptr)
  *
  * Atomically subtracts @delta from @ptr.
  */
-static inline void atomic64_sub(unsigned long long delta, atomic64_t *ptr)
-{
-	atomic64_add(-delta, ptr);
-}
+extern void atomic64_sub(u64 delta, atomic64_t *ptr);
 
 /**
  * atomic64_sub_and_test - subtract value from variable and test result
@@ -409,13 +362,7 @@ static inline void atomic64_sub(unsigned long long delta, atomic64_t *ptr)
  * true if the result is zero, or false for all
  * other cases.
  */
-static inline int
-atomic64_sub_and_test(unsigned long long delta, atomic64_t *ptr)
-{
-	unsigned long long old_val = atomic64_sub_return(delta, ptr);
-
-	return old_val == 0;
-}
+extern int atomic64_sub_and_test(u64 delta, atomic64_t *ptr);
 
 /**
  * atomic64_inc - increment atomic64 variable
@@ -423,10 +370,7 @@ atomic64_sub_and_test(unsigned long long delta, atomic64_t *ptr)
  *
  * Atomically increments @ptr by 1.
  */
-static inline void atomic64_inc(atomic64_t *ptr)
-{
-	atomic64_add(1, ptr);
-}
+extern void atomic64_inc(atomic64_t *ptr);
 
 /**
  * atomic64_dec - decrement atomic64 variable
@@ -434,10 +378,7 @@ static inline void atomic64_inc(atomic64_t *ptr)
  *
  * Atomically decrements @ptr by 1.
  */
-static inline void atomic64_dec(atomic64_t *ptr)
-{
-	atomic64_sub(1, ptr);
-}
+extern void atomic64_dec(atomic64_t *ptr);
 
 /**
  * atomic64_dec_and_test - decrement and test
@@ -447,10 +388,7 @@ static inline void atomic64_dec(atomic64_t *ptr)
  * returns true if the result is 0, or false for all other
  * cases.
  */
-static inline int atomic64_dec_and_test(atomic64_t *ptr)
-{
-	return atomic64_sub_and_test(1, ptr);
-}
+extern int atomic64_dec_and_test(atomic64_t *ptr);
 
 /**
  * atomic64_inc_and_test - increment and test
@@ -460,10 +398,7 @@ static inline int atomic64_dec_and_test(atomic64_t *ptr)
  * and returns true if the result is zero, or false for all
  * other cases.
  */
-static inline int atomic64_inc_and_test(atomic64_t *ptr)
-{
-	return atomic64_sub_and_test(-1, ptr);
-}
+extern int atomic64_inc_and_test(atomic64_t *ptr);
 
 /**
  * atomic64_add_negative - add and test if negative
@@ -474,13 +409,7 @@ static inline int atomic64_inc_and_test(atomic64_t *ptr)
  * if the result is negative, or false when
  * result is greater than or equal to zero.
  */
-static inline int
-atomic64_add_negative(unsigned long long delta, atomic64_t *ptr)
-{
-	long long old_val = atomic64_add_return(delta, ptr);
-
-	return old_val < 0;
-}
+extern int atomic64_add_negative(u64 delta, atomic64_t *ptr);
 
 #include <asm-generic/atomic-long.h>
 #endif /* _ASM_X86_ATOMIC_32_H */
diff --git a/arch/x86/include/asm/atomic_64.h b/arch/x86/include/asm/atomic_64.h
index 0d636022000..d605dc268e7 100644
--- a/arch/x86/include/asm/atomic_64.h
+++ b/arch/x86/include/asm/atomic_64.h
@@ -18,7 +18,10 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v)		((v)->counter)
+static inline int atomic_read(const atomic_t *v)
+{
+	return v->counter;
+}
 
 /**
  * atomic_set - set atomic variable
@@ -27,7 +30,10 @@
  *
  * Atomically sets the value of @v to @i.
  */
-#define atomic_set(v, i)		(((v)->counter) = (i))
+static inline void atomic_set(atomic_t *v, int i)
+{
+	v->counter = i;
+}
 
 /**
  * atomic_add - add integer to atomic variable
@@ -192,7 +198,10 @@ static inline int atomic_sub_return(int i, atomic_t *v)
  * Atomically reads the value of @v.
  * Doesn't imply a read memory barrier.
  */
-#define atomic64_read(v)		((v)->counter)
+static inline long atomic64_read(const atomic64_t *v)
+{
+	return v->counter;
+}
 
 /**
  * atomic64_set - set atomic64 variable
@@ -201,7 +210,10 @@ static inline int atomic_sub_return(int i, atomic_t *v)
  *
  * Atomically sets the value of @v to @i.
  */
-#define atomic64_set(v, i)		(((v)->counter) = (i))
+static inline void atomic64_set(atomic64_t *v, long i)
+{
+	v->counter = i;
+}
 
 /**
  * atomic64_add - add integer to atomic64 variable
@@ -355,11 +367,25 @@ static inline long atomic64_sub_return(long i, atomic64_t *v)
 #define atomic64_inc_return(v)  (atomic64_add_return(1, (v)))
 #define atomic64_dec_return(v)  (atomic64_sub_return(1, (v)))
 
-#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+static inline long atomic64_cmpxchg(atomic64_t *v, long old, long new)
+{
+	return cmpxchg(&v->counter, old, new);
+}
+
+static inline long atomic64_xchg(atomic64_t *v, long new)
+{
+	return xchg(&v->counter, new);
+}
 
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+static inline long atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	return cmpxchg(&v->counter, old, new);
+}
+
+static inline long atomic_xchg(atomic_t *v, int new)
+{
+	return xchg(&v->counter, new);
+}
 
 /**
  * atomic_add_unless - add unless the number is a given value
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 418e632d4a8..7a1065958ba 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -8,7 +8,7 @@
 
 #ifdef __KERNEL__
 
-#include <asm/page_types.h>
+#include <asm/pgtable_types.h>
 
 /* Physical address where kernel should be loaded. */
 #define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
@@ -16,10 +16,10 @@
 				& ~(CONFIG_PHYSICAL_ALIGN - 1))
 
 /* Minimum kernel alignment, as a power of two */
-#ifdef CONFIG_x86_64
+#ifdef CONFIG_X86_64
 #define MIN_KERNEL_ALIGN_LG2	PMD_SHIFT
 #else
-#define MIN_KERNEL_ALIGN_LG2	(PAGE_SHIFT+1)
+#define MIN_KERNEL_ALIGN_LG2	(PAGE_SHIFT + THREAD_ORDER)
 #endif
 #define MIN_KERNEL_ALIGN	(_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
 
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index edc90f23e70..8406ed7f992 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -33,7 +33,7 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...);
 #define efi_call_virt6(f, a1, a2, a3, a4, a5, a6)	\
 	efi_call_virt(f, a1, a2, a3, a4, a5, a6)
 
-#define efi_ioremap(addr, size)			ioremap_cache(addr, size)
+#define efi_ioremap(addr, size, type)		ioremap_cache(addr, size)
 
 #else /* !CONFIG_X86_32 */
 
@@ -84,7 +84,8 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3,
 	efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
 		  (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
 
-extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size);
+extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
+				 u32 type);
 
 #endif /* CONFIG_X86_32 */
 
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 2d81af3974a..7b2d71df39a 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -111,12 +111,9 @@ enum fixed_addresses {
 #ifdef CONFIG_PARAVIRT
 	FIX_PARAVIRT_BOOTMAP,
 #endif
-	FIX_TEXT_POKE0,	/* reserve 2 pages for text_poke() */
-	FIX_TEXT_POKE1,
+	FIX_TEXT_POKE1,	/* reserve 2 pages for text_poke() */
+	FIX_TEXT_POKE0, /* first page is last, because allocation is backward */
 	__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-	FIX_OHCI1394_BASE,
-#endif
 	/*
 	 * 256 temporary boot-time mappings, used by early_ioremap(),
 	 * before ioremap() is functional.
@@ -129,6 +126,9 @@ enum fixed_addresses {
 	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
 			(__end_of_permanent_fixed_addresses & 255),
 	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+	FIX_OHCI1394_BASE,
+#endif
 #ifdef CONFIG_X86_32
 	FIX_WP_TEST,
 #endif
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index daf866ed061..330ee807f89 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -161,6 +161,7 @@ extern int io_apic_set_pci_routing(struct device *dev, int irq,
 		 struct io_apic_irq_attr *irq_attr);
 extern int (*ioapic_renumber_irq)(int ioapic, int irq);
 extern void ioapic_init_mappings(void);
+extern void ioapic_insert_resources(void);
 
 extern struct IO_APIC_route_entry **alloc_ioapic_entries(void);
 extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries);
@@ -180,6 +181,7 @@ extern void ioapic_write_entry(int apic, int pin,
 #define io_apic_assign_pci_irqs 0
 static const int timer_through_8259 = 0;
 static inline void ioapic_init_mappings(void)	{ }
+static inline void ioapic_insert_resources(void) { }
 
 static inline void probe_nr_irqs_gsi(void)	{ }
 #endif
diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
index 2bdab21f089..c6ccbe7e81a 100644
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -12,9 +12,15 @@ static inline unsigned long native_save_fl(void)
 {
 	unsigned long flags;
 
+	/*
+	 * Note: this needs to be "=r" not "=rm", because we have the
+	 * stack offset from what gcc expects at the time the "pop" is
+	 * executed, and so a memory reference with respect to the stack
+	 * would end up using the wrong address.
+	 */
 	asm volatile("# __raw_save_flags\n\t"
 		     "pushf ; pop %0"
-		     : "=g" (flags)
+		     : "=r" (flags)
 		     : /* no input */
 		     : "memory");
 
diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
index 313389cd50d..5136dad57cb 100644
--- a/arch/x86/include/asm/lguest.h
+++ b/arch/x86/include/asm/lguest.h
@@ -17,8 +17,7 @@
 /* Pages for switcher itself, then two pages per cpu */
 #define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * nr_cpu_ids)
 
-/* We map at -4M (-2M when PAE is activated) for ease of mapping
- * into the guest (one PTE page). */
+/* We map at -4M (-2M for PAE) for ease of mapping (one PTE page). */
 #ifdef CONFIG_X86_PAE
 #define SWITCHER_ADDR 0xFFE00000
 #else
diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index d31c4a68407..ba0eed8aa1a 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -30,27 +30,27 @@
 #include <asm/hw_irq.h>
 #include <asm/kvm_para.h>
 
-/*G:031 But first, how does our Guest contact the Host to ask for privileged
+/*G:030
+ * But first, how does our Guest contact the Host to ask for privileged
  * operations?  There are two ways: the direct way is to make a "hypercall",
  * to make requests of the Host Itself.
  *
- * We use the KVM hypercall mechanism. Seventeen hypercalls are
- * available: the hypercall number is put in the %eax register, and the
- * arguments (when required) are placed in %ebx, %ecx, %edx and %esi.
- * If a return value makes sense, it's returned in %eax.
+ * We use the KVM hypercall mechanism, though completely different hypercall
+ * numbers. Seventeen hypercalls are available: the hypercall number is put in
+ * the %eax register, and the arguments (when required) are placed in %ebx,
+ * %ecx, %edx and %esi.  If a return value makes sense, it's returned in %eax.
  *
  * Grossly invalid calls result in Sudden Death at the hands of the vengeful
  * Host, rather than returning failure.  This reflects Winston Churchill's
- * definition of a gentleman: "someone who is only rude intentionally". */
-/*:*/
+ * definition of a gentleman: "someone who is only rude intentionally".
+:*/
 
 /* Can't use our min() macro here: needs to be a constant */
 #define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
 
 #define LHCALL_RING_SIZE 64
 struct hcall_args {
-	/* These map directly onto eax, ebx, ecx, edx and esi
-	 * in struct lguest_regs */
+	/* These map directly onto eax/ebx/ecx/edx/esi in struct lguest_regs */
 	unsigned long arg0, arg1, arg2, arg3, arg4;
 };
 
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 1692fb5050e..6be7fc254b5 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -246,10 +246,6 @@
 #define MSR_IA32_MISC_ENABLE_TURBO_DISABLE	(1ULL << 38)
 #define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE	(1ULL << 39)
 
-/* Intel Model 6 */
-#define MSR_P6_EVNTSEL0			0x00000186
-#define MSR_P6_EVNTSEL1			0x00000187
-
 /* P4/Xeon+ specific */
 #define MSR_IA32_MCG_EAX		0x00000180
 #define MSR_IA32_MCG_EBX		0x00000181
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index c9726440993..c86e5ed4af5 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -72,7 +72,6 @@ void lapic_watchdog_stop(void);
 int lapic_watchdog_init(unsigned nmi_hz);
 int lapic_wd_event(unsigned nmi_hz);
 unsigned lapic_adjust_nmi_hz(unsigned hz);
-int lapic_watchdog_ok(void);
 void disable_lapic_nmi_watchdog(void);
 void enable_lapic_nmi_watchdog(void);
 void stop_nmi(void);
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 927958d13c1..1ff685ca221 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -91,7 +91,7 @@ extern void pci_iommu_alloc(void);
 
 #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
 
-#if defined(CONFIG_X86_64) || defined(CONFIG_DMA_API_DEBUG)
+#if defined(CONFIG_X86_64) || defined(CONFIG_DMAR) || defined(CONFIG_DMA_API_DEBUG)
 
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       \
 	        dma_addr_t ADDR_NAME;
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 02ecb30982a..103f1ddb0d8 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -42,6 +42,7 @@
 
 #else /* ...!ASSEMBLY */
 
+#include <linux/kernel.h>
 #include <linux/stringify.h>
 
 #ifdef CONFIG_SMP
@@ -155,6 +156,15 @@ do {							\
 /* We can use this directly for local CPU (faster). */
 DECLARE_PER_CPU(unsigned long, this_cpu_off);
 
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+void *pcpu_lpage_remapped(void *kaddr);
+#else
+static inline void *pcpu_lpage_remapped(void *kaddr)
+{
+	return NULL;
+}
+#endif
+
 #endif /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_SMP
diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h
index 5fb33e160ea..fa64e401589 100644
--- a/arch/x86/include/asm/perf_counter.h
+++ b/arch/x86/include/asm/perf_counter.h
@@ -87,6 +87,9 @@ union cpuid10_edx {
 #ifdef CONFIG_PERF_COUNTERS
 extern void init_hw_perf_counters(void);
 extern void perf_counters_lapic_init(void);
+
+#define PERF_COUNTER_INDEX_OFFSET			0
+
 #else
 static inline void init_hw_perf_counters(void)		{ }
 static inline void perf_counters_lapic_init(void)	{ }
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index dd14c54ac71..0e8c2a0fd92 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -46,7 +46,13 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte)
 	__free_page(pte);
 }
 
-extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+extern void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
+				  unsigned long address)
+{
+	___pte_free_tlb(tlb, pte);
+}
 
 static inline void pmd_populate_kernel(struct mm_struct *mm,
 				       pmd_t *pmd, pte_t *pte)
@@ -78,7 +84,13 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	free_page((unsigned long)pmd);
 }
 
-extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+				  unsigned long adddress)
+{
+	___pmd_free_tlb(tlb, pmd);
+}
 
 #ifdef CONFIG_X86_PAE
 extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
@@ -108,7 +120,14 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 	free_page((unsigned long)pud);
 }
 
-extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+extern void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+
+static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
+				  unsigned long address)
+{
+	___pud_free_tlb(tlb, pud);
+}
+
 #endif	/* PAGETABLE_LEVELS > 3 */
 #endif	/* PAGETABLE_LEVELS > 2 */
 
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 3cc06e3fceb..16748077559 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -2,6 +2,7 @@
 #define _ASM_X86_PGTABLE_H
 
 #include <asm/page.h>
+#include <asm/e820.h>
 
 #include <asm/pgtable_types.h>
 
@@ -269,10 +270,17 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
 
 #define canon_pgprot(p) __pgprot(massage_pgprot(p))
 
-static inline int is_new_memtype_allowed(unsigned long flags,
-						unsigned long new_flags)
+static inline int is_new_memtype_allowed(u64 paddr, unsigned long size,
+					 unsigned long flags,
+					 unsigned long new_flags)
 {
 	/*
+	 * PAT type is always WB for ISA. So no need to check.
+	 */
+	if (is_ISA_range(paddr, paddr + size - 1))
+		return 1;
+
+	/*
 	 * Certain new memtypes are not allowed with certain
 	 * requested memtype:
 	 * - request is uncached, return cannot be write-back
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index 49fb3ecf3bb..621f56d7312 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -22,7 +22,14 @@ extern int reboot_force;
 
 long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
 
-#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1))
-#define round_down(x, y) ((x) & ~((y) - 1))
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x,y) ((__typeof__(x))((y)-1))
+#define round_up(x,y) ((((x)-1) | __round_mask(x,y))+1)
+#define round_down(x,y) ((x) & ~__round_mask(x,y))
 
 #endif /* _ASM_X86_PROTO_H */
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index b7e5db87639..4e77853321d 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -302,4 +302,8 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw)
 #define _raw_read_relax(lock)	cpu_relax()
 #define _raw_write_relax(lock)	cpu_relax()
 
+/* The {read|write|spin}_lock() on x86 are full memory barriers. */
+static inline void smp_mb__after_lock(void) { }
+#define ARCH_HAS_SMP_MB_AFTER_LOCK
+
 #endif /* _ASM_X86_SPINLOCK_H */
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index f517944b2b1..cf86a5e7381 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -3,6 +3,8 @@
 
 extern int kstack_depth_to_print;
 
+int x86_is_stack_id(int id, char *name);
+
 /* Generic stack tracer with callbacks */
 
 struct stacktrace_ops {
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index b0783520988..fad7d40b75f 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -49,7 +49,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 20e6a795e16..d2c6c930b49 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -212,9 +212,9 @@ extern int __get_user_bad(void);
 		     : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
 #else
 #define __put_user_asm_u64(x, ptr, retval, errret) \
-	__put_user_asm(x, ptr, retval, "q", "", "Zr", errret)
+	__put_user_asm(x, ptr, retval, "q", "", "er", errret)
 #define __put_user_asm_ex_u64(x, addr)	\
-	__put_user_asm_ex(x, addr, "q", "", "Zr")
+	__put_user_asm_ex(x, addr, "q", "", "er")
 #define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
 #endif
 
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 8cc687326eb..db24b215fc5 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -88,11 +88,11 @@ int __copy_to_user(void __user *dst, const void *src, unsigned size)
 			      ret, "l", "k", "ir", 4);
 		return ret;
 	case 8:__put_user_asm(*(u64 *)src, (u64 __user *)dst,
-			      ret, "q", "", "ir", 8);
+			      ret, "q", "", "er", 8);
 		return ret;
 	case 10:
 		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
-			       ret, "q", "", "ir", 10);
+			       ret, "q", "", "er", 10);
 		if (unlikely(ret))
 			return ret;
 		asm("":::"memory");
@@ -101,12 +101,12 @@ int __copy_to_user(void __user *dst, const void *src, unsigned size)
 		return ret;
 	case 16:
 		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
-			       ret, "q", "", "ir", 16);
+			       ret, "q", "", "er", 16);
 		if (unlikely(ret))
 			return ret;
 		asm("":::"memory");
 		__put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst,
-			       ret, "q", "", "ir", 8);
+			       ret, "q", "", "er", 8);
 		return ret;
 	default:
 		return copy_user_generic((__force void *)dst, src, size);
@@ -157,7 +157,7 @@ int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
 			       ret, "q", "", "=r", 8);
 		if (likely(!ret))
 			__put_user_asm(tmp, (u64 __user *)dst,
-				       ret, "q", "", "ir", 8);
+				       ret, "q", "", "er", 8);
 		return ret;
 	}
 	default:
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index bddd44f2f0a..80e2984f521 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -133,7 +133,7 @@ struct bau_msg_payload {
  * see table 4.2.3.0.1 in broacast_assist spec.
  */
 struct bau_msg_header {
-	unsigned int dest_subnodeid:6;	/* must be zero */
+	unsigned int dest_subnodeid:6;	/* must be 0x10, for the LB */
 	/* bits 5:0 */
 	unsigned int base_dest_nodeid:15; /* nasid>>1 (pnode) of */
 	/* bits 20:6 */			  /* first bit in node_map */
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 341070f7ad5..77a68505419 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -175,7 +175,7 @@ DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 #define UV_GLOBAL_MMR32_PNODE_BITS(p)	((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
 
 #define UV_GLOBAL_MMR64_PNODE_BITS(p)					\
-	((unsigned long)(UV_PNODE_TO_GNODE(p)) << UV_GLOBAL_MMR64_PNODE_SHIFT)
+	(((unsigned long)(p)) << UV_GLOBAL_MMR64_PNODE_SHIFT)
 
 #define UV_APIC_PNODE_SHIFT	6
 
@@ -327,6 +327,7 @@ struct uv_blade_info {
 	unsigned short	nr_possible_cpus;
 	unsigned short	nr_online_cpus;
 	unsigned short	pnode;
+	short		memory_nid;
 };
 extern struct uv_blade_info *uv_blade_info;
 extern short *uv_node_to_blade;
@@ -363,6 +364,12 @@ static inline int uv_blade_to_pnode(int bid)
 	return uv_blade_info[bid].pnode;
 }
 
+/* Nid of memory node on blade. -1 if no blade-local memory */
+static inline int uv_blade_to_memory_nid(int bid)
+{
+	return uv_blade_info[bid].memory_nid;
+}
+
 /* Determine the number of possible cpus on a blade */
 static inline int uv_blade_nr_possible_cpus(int bid)
 {
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 6c327b852e2..430d5b24af7 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -26,6 +26,8 @@ CFLAGS_tsc.o		:= $(nostackp)
 CFLAGS_paravirt.o	:= $(nostackp)
 GCOV_PROFILE_vsyscall_64.o	:= n
 GCOV_PROFILE_hpet.o		:= n
+GCOV_PROFILE_tsc.o		:= n
+GCOV_PROFILE_paravirt.o		:= n
 
 obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 9372f0406ad..6c99f503780 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1192,7 +1192,7 @@ out:
 	return 0;
 }
 
-struct notifier_block device_nb = {
+static struct notifier_block device_nb = {
 	.notifier_call = device_change_notifier,
 };
 
@@ -1763,7 +1763,7 @@ static void *alloc_coherent(struct device *dev, size_t size,
 	flag |= __GFP_ZERO;
 	virt_addr = (void *)__get_free_pages(flag, get_order(size));
 	if (!virt_addr)
-		return 0;
+		return NULL;
 
 	paddr = virt_to_phys(virt_addr);
 
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 10b2accd12e..c1b17e97252 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -472,6 +472,8 @@ static u8 * __init alloc_event_buffer(struct amd_iommu *iommu)
 	if (iommu->evt_buf == NULL)
 		return NULL;
 
+	iommu->evt_buf_size = EVT_BUFFER_SIZE;
+
 	return iommu->evt_buf;
 }
 
@@ -691,6 +693,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 
 			devid = e->devid;
 			devid_to = e->ext >> 8;
+			set_dev_entry_from_acpi(iommu, devid   , e->flags, 0);
 			set_dev_entry_from_acpi(iommu, devid_to, e->flags, 0);
 			amd_iommu_alias_table[devid] = devid_to;
 			break;
@@ -749,11 +752,13 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 
 			devid = e->devid;
 			for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
-				if (alias)
+				if (alias) {
 					amd_iommu_alias_table[dev_i] = devid_to;
-				set_dev_entry_from_acpi(iommu,
-						amd_iommu_alias_table[dev_i],
-						flags, ext_flags);
+					set_dev_entry_from_acpi(iommu,
+						devid_to, flags, ext_flags);
+				}
+				set_dev_entry_from_acpi(iommu, dev_i,
+							flags, ext_flags);
 			}
 			break;
 		default:
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 8c7c042ecad..0a1c2830ec6 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -140,7 +140,6 @@ int x2apic_mode;
 #ifdef CONFIG_X86_X2APIC
 /* x2apic enabled before OS handover */
 static int x2apic_preenabled;
-static int disable_x2apic;
 static __init int setup_nox2apic(char *str)
 {
 	if (x2apic_enabled()) {
@@ -149,7 +148,6 @@ static __init int setup_nox2apic(char *str)
 		return 0;
 	}
 
-	disable_x2apic = 1;
 	setup_clear_cpu_cap(X86_FEATURE_X2APIC);
 	return 0;
 }
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 69328ac8de9..8952a589028 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -652,7 +652,8 @@ static int es7000_mps_oem_check_cluster(struct mpc_table *mpc, char *oem,
 	return ret && es7000_apic_is_cluster();
 }
 
-struct apic apic_es7000_cluster = {
+/* We've been warned by a false positive warning.Use __refdata to keep calm. */
+struct apic __refdata apic_es7000_cluster = {
 
 	.name				= "es7000",
 	.probe				= probe_es7000,
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 4d0216fcb36..d2ed6c5ddc8 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1716,25 +1716,19 @@ __apicdebuginit(void) print_IO_APIC(void)
 	return;
 }
 
-__apicdebuginit(void) print_APIC_bitfield(int base)
+__apicdebuginit(void) print_APIC_field(int base)
 {
-	unsigned int v;
-	int i, j;
+	int i;
 
 	if (apic_verbosity == APIC_QUIET)
 		return;
 
-	printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
-	for (i = 0; i < 8; i++) {
-		v = apic_read(base + i*0x10);
-		for (j = 0; j < 32; j++) {
-			if (v & (1<<j))
-				printk("1");
-			else
-				printk("0");
-		}
-		printk("\n");
-	}
+	printk(KERN_DEBUG);
+
+	for (i = 0; i < 8; i++)
+		printk(KERN_CONT "%08x", apic_read(base + i*0x10));
+
+	printk(KERN_CONT "\n");
 }
 
 __apicdebuginit(void) print_local_APIC(void *dummy)
@@ -1745,7 +1739,7 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
 	if (apic_verbosity == APIC_QUIET)
 		return;
 
-	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
+	printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
 	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, read_apic_id());
@@ -1786,11 +1780,11 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
 	printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
 
 	printk(KERN_DEBUG "... APIC ISR field:\n");
-	print_APIC_bitfield(APIC_ISR);
+	print_APIC_field(APIC_ISR);
 	printk(KERN_DEBUG "... APIC TMR field:\n");
-	print_APIC_bitfield(APIC_TMR);
+	print_APIC_field(APIC_TMR);
 	printk(KERN_DEBUG "... APIC IRR field:\n");
-	print_APIC_bitfield(APIC_IRR);
+	print_APIC_field(APIC_IRR);
 
 	if (APIC_INTEGRATED(ver)) {             /* !82489DX */
 		if (maxlvt > 3)         /* Due to the Pentium erratum 3AP. */
@@ -3799,6 +3793,9 @@ int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
 	mmr_pnode = uv_blade_to_pnode(mmr_blade);
 	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
 
+	if (cfg->move_in_progress)
+		send_cleanup_vector(cfg);
+
 	return irq;
 }
 
@@ -4187,28 +4184,20 @@ fake_ioapic_page:
 	}
 }
 
-static int __init ioapic_insert_resources(void)
+void __init ioapic_insert_resources(void)
 {
 	int i;
 	struct resource *r = ioapic_resources;
 
 	if (!r) {
-		if (nr_ioapics > 0) {
+		if (nr_ioapics > 0)
 			printk(KERN_ERR
 				"IO APIC resources couldn't be allocated.\n");
-			return -1;
-		}
-		return 0;
+		return;
 	}
 
 	for (i = 0; i < nr_ioapics; i++) {
 		insert_resource(&iomem_resource, r);
 		r++;
 	}
-
-	return 0;
 }
-
-/* Insert the IO APIC resources after PCI initialization has occured to handle
- * IO APICS that are mapped in on a BAR in PCI space. */
-late_initcall(ioapic_insert_resources);
diff --git a/arch/x86/kernel/apic/ipi.c b/arch/x86/kernel/apic/ipi.c
index dbf5445727a..6ef00ba4c88 100644
--- a/arch/x86/kernel/apic/ipi.c
+++ b/arch/x86/kernel/apic/ipi.c
@@ -106,6 +106,9 @@ void default_send_IPI_mask_logical(const struct cpumask *cpumask, int vector)
 	unsigned long mask = cpumask_bits(cpumask)[0];
 	unsigned long flags;
 
+	if (WARN_ONCE(!mask, "empty IPI mask"))
+		return;
+
 	local_irq_save(flags);
 	WARN_ON(mask & ~cpumask_bits(cpu_online_mask)[0]);
 	__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 533e59c6fc8..ca96e68f0d2 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -493,7 +493,8 @@ static void numaq_setup_portio_remap(void)
 		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
 }
 
-struct apic apic_numaq = {
+/* Use __refdata to keep false positive warning calm.	*/
+struct apic __refdata apic_numaq = {
 
 	.name				= "NUMAQ",
 	.probe				= probe_numaq,
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index bc3e880f9b8..fcec2f1d34a 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -44,6 +44,11 @@ static struct apic *apic_probe[] __initdata = {
 	NULL,
 };
 
+static int apicid_phys_pkg_id(int initial_apic_id, int index_msb)
+{
+	return hard_smp_processor_id() >> index_msb;
+}
+
 /*
  * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
  */
@@ -69,6 +74,11 @@ void __init default_setup_apic_routing(void)
 		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
 	}
 
+	if (is_vsmp_box()) {
+		/* need to update phys_pkg_id */
+		apic->phys_pkg_id = apicid_phys_pkg_id;
+	}
+
 	/*
 	 * Now that apic routing model is selected, configure the
 	 * fault handling for intr remapping.
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 8e4cbb255c3..a5371ec3677 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -17,11 +17,13 @@ static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	return x2apic_enabled();
 }
 
-/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
-
+/*
+ * need to use more than cpu 0, because we need more vectors when
+ * MSI-X are used.
+ */
 static const struct cpumask *x2apic_target_cpus(void)
 {
-	return cpumask_of(0);
+	return cpu_online_mask;
 }
 
 /*
@@ -170,7 +172,7 @@ static unsigned long set_apic_id(unsigned int id)
 
 static int x2apic_cluster_phys_pkg_id(int initial_apicid, int index_msb)
 {
-	return current_cpu_data.initial_apicid >> index_msb;
+	return initial_apicid >> index_msb;
 }
 
 static void x2apic_send_IPI_self(int vector)
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index a284359627e..a8989aadc99 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -27,11 +27,13 @@ static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 		return 0;
 }
 
-/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
-
+/*
+ * need to use more than cpu 0, because we need more vectors when
+ * MSI-X are used.
+ */
 static const struct cpumask *x2apic_target_cpus(void)
 {
-	return cpumask_of(0);
+	return cpu_online_mask;
 }
 
 static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
@@ -162,7 +164,7 @@ static unsigned long set_apic_id(unsigned int id)
 
 static int x2apic_phys_pkg_id(int initial_apicid, int index_msb)
 {
-	return current_cpu_data.initial_apicid >> index_msb;
+	return initial_apicid >> index_msb;
 }
 
 static void x2apic_send_IPI_self(int vector)
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 096d19aea2f..601159374e8 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -46,7 +46,7 @@ static int early_get_nodeid(void)
 	return node_id.s.node_id;
 }
 
-static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (!strcmp(oem_id, "SGI")) {
 		if (!strcmp(oem_table_id, "UVL"))
@@ -253,7 +253,7 @@ static void uv_send_IPI_self(int vector)
 	apic_write(APIC_SELF_IPI, vector);
 }
 
-struct apic apic_x2apic_uv_x = {
+struct apic __refdata apic_x2apic_uv_x = {
 
 	.name				= "UV large system",
 	.probe				= NULL,
@@ -261,7 +261,7 @@ struct apic apic_x2apic_uv_x = {
 	.apic_id_registered		= uv_apic_id_registered,
 
 	.irq_delivery_mode		= dest_Fixed,
-	.irq_dest_mode			= 1, /* logical */
+	.irq_dest_mode			= 0, /* physical */
 
 	.target_cpus			= uv_target_cpus,
 	.disable_esr			= 0,
@@ -362,12 +362,6 @@ static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
 	BUG();
 }
 
-static __init void map_low_mmrs(void)
-{
-	init_extra_mapping_uc(UV_GLOBAL_MMR32_BASE, UV_GLOBAL_MMR32_SIZE);
-	init_extra_mapping_uc(UV_LOCAL_MMR_BASE, UV_LOCAL_MMR_SIZE);
-}
-
 enum map_type {map_wb, map_uc};
 
 static __init void map_high(char *id, unsigned long base, int shift,
@@ -395,26 +389,6 @@ static __init void map_gru_high(int max_pnode)
 		map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
 }
 
-static __init void map_config_high(int max_pnode)
-{
-	union uvh_rh_gam_cfg_overlay_config_mmr_u cfg;
-	int shift = UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT;
-
-	cfg.v = uv_read_local_mmr(UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR);
-	if (cfg.s.enable)
-		map_high("CONFIG", cfg.s.base, shift, max_pnode, map_uc);
-}
-
-static __init void map_mmr_high(int max_pnode)
-{
-	union uvh_rh_gam_mmr_overlay_config_mmr_u mmr;
-	int shift = UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT;
-
-	mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
-	if (mmr.s.enable)
-		map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
-}
-
 static __init void map_mmioh_high(int max_pnode)
 {
 	union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
@@ -566,8 +540,6 @@ void __init uv_system_init(void)
 	unsigned long mmr_base, present, paddr;
 	unsigned short pnode_mask;
 
-	map_low_mmrs();
-
 	m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
 	m_val = m_n_config.s.m_skt;
 	n_val = m_n_config.s.n_skt;
@@ -591,6 +563,8 @@ void __init uv_system_init(void)
 	bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
 	uv_blade_info = kmalloc(bytes, GFP_KERNEL);
 	BUG_ON(!uv_blade_info);
+	for (blade = 0; blade < uv_num_possible_blades(); blade++)
+		uv_blade_info[blade].memory_nid = -1;
 
 	get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
 
@@ -629,6 +603,9 @@ void __init uv_system_init(void)
 		lcpu = uv_blade_info[blade].nr_possible_cpus;
 		uv_blade_info[blade].nr_possible_cpus++;
 
+		/* Any node on the blade, else will contain -1. */
+		uv_blade_info[blade].memory_nid = nid;
+
 		uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
 		uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size;
 		uv_cpu_hub_info(cpu)->m_val = m_val;
@@ -662,11 +639,10 @@ void __init uv_system_init(void)
 		pnode = (paddr >> m_val) & pnode_mask;
 		blade = boot_pnode_to_blade(pnode);
 		uv_node_to_blade[nid] = blade;
+		max_pnode = max(pnode, max_pnode);
 	}
 
 	map_gru_high(max_pnode);
-	map_mmr_high(max_pnode);
-	map_config_high(max_pnode);
 	map_mmioh_high(max_pnode);
 
 	uv_cpu_init();
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 79302e9a33a..442b5508893 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -811,7 +811,7 @@ static int apm_do_idle(void)
 	u8 ret = 0;
 	int idled = 0;
 	int polling;
-	int err;
+	int err = 0;
 
 	polling = !!(current_thread_info()->status & TS_POLLING);
 	if (polling) {
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 3efcb2b96a1..c1f253dac15 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -7,6 +7,10 @@ ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_common.o = -pg
 endif
 
+# Make sure load_percpu_segment has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_common.o		:= $(nostackp)
+
 obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
 obj-y			+= proc.o capflags.o powerflags.o common.o
 obj-y			+= vmware.o hypervisor.o
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index e5b27d8f1b4..63fddcd082c 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -258,13 +258,15 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_X86_HT
 	unsigned bits;
+	int cpu = smp_processor_id();
 
 	bits = c->x86_coreid_bits;
-
 	/* Low order bits define the core id (index of core in socket) */
 	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
 	/* Convert the initial APIC ID into the socket ID */
 	c->phys_proc_id = c->initial_apicid >> bits;
+	/* use socket ID also for last level cache */
+	per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
 #endif
 }
 
@@ -354,7 +356,7 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 #endif
 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
 	/* check CPU config space for extended APIC ID */
-	if (c->x86 >= 0xf) {
+	if (cpu_has_apic && c->x86 >= 0xf) {
 		unsigned int val;
 		val = read_pci_config(0, 24, 0, 0x68);
 		if ((val & ((1 << 17) | (1 << 18))) == ((1 << 17) | (1 << 18)))
@@ -398,6 +400,13 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		level = cpuid_eax(1);
 		if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
 			set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+
+		/*
+		 * Some BIOSes incorrectly force this feature, but only K8
+		 * revision D (model = 0x14) and later actually support it.
+		 */
+		if (c->x86_model < 0x14)
+			clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
 	}
 	if (c->x86 == 0x10 || c->x86 == 0x11)
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 6b26d4deada..5ce60a88027 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -59,7 +59,30 @@ void __init setup_cpu_local_masks(void)
 	alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask);
 }
 
-static const struct cpu_dev *this_cpu __cpuinitdata;
+static void __cpuinit default_init(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_64
+	display_cacheinfo(c);
+#else
+	/* Not much we can do here... */
+	/* Check if at least it has cpuid */
+	if (c->cpuid_level == -1) {
+		/* No cpuid. It must be an ancient CPU */
+		if (c->x86 == 4)
+			strcpy(c->x86_model_id, "486");
+		else if (c->x86 == 3)
+			strcpy(c->x86_model_id, "386");
+	}
+#endif
+}
+
+static const struct cpu_dev __cpuinitconst default_cpu = {
+	.c_init		= default_init,
+	.c_vendor	= "Unknown",
+	.c_x86_vendor	= X86_VENDOR_UNKNOWN,
+};
+
+static const struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
 
 DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 #ifdef CONFIG_X86_64
@@ -332,29 +355,6 @@ void switch_to_new_gdt(int cpu)
 
 static const struct cpu_dev *__cpuinitdata cpu_devs[X86_VENDOR_NUM] = {};
 
-static void __cpuinit default_init(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_X86_64
-	display_cacheinfo(c);
-#else
-	/* Not much we can do here... */
-	/* Check if at least it has cpuid */
-	if (c->cpuid_level == -1) {
-		/* No cpuid. It must be an ancient CPU */
-		if (c->x86 == 4)
-			strcpy(c->x86_model_id, "486");
-		else if (c->x86 == 3)
-			strcpy(c->x86_model_id, "386");
-	}
-#endif
-}
-
-static const struct cpu_dev __cpuinitconst default_cpu = {
-	.c_init	= default_init,
-	.c_vendor = "Unknown",
-	.c_x86_vendor = X86_VENDOR_UNKNOWN,
-};
-
 static void __cpuinit get_model_name(struct cpuinfo_x86 *c)
 {
 	unsigned int *v;
@@ -848,9 +848,6 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
 	numa_add_cpu(smp_processor_id());
 #endif
-
-	/* Cap the iomem address space to what is addressable on all CPUs */
-	iomem_resource.end &= (1ULL << c->x86_phys_bits) - 1;
 }
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 81cbe64ed6b..2a50ef89100 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -299,7 +299,7 @@ static int transition_pstate(struct powernow_k8_data *data, u32 pstate)
 static int transition_fid_vid(struct powernow_k8_data *data,
 		u32 reqfid, u32 reqvid)
 {
-	if (core_voltage_pre_transition(data, reqvid))
+	if (core_voltage_pre_transition(data, reqvid, reqfid))
 		return 1;
 
 	if (core_frequency_transition(data, reqfid))
@@ -327,17 +327,20 @@ static int transition_fid_vid(struct powernow_k8_data *data,
 
 /* Phase 1 - core voltage transition ... setup voltage */
 static int core_voltage_pre_transition(struct powernow_k8_data *data,
-		u32 reqvid)
+		u32 reqvid, u32 reqfid)
 {
 	u32 rvosteps = data->rvo;
 	u32 savefid = data->currfid;
-	u32 maxvid, lo;
+	u32 maxvid, lo, rvomult = 1;
 
 	dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
 		"reqvid 0x%x, rvo 0x%x\n",
 		smp_processor_id(),
 		data->currfid, data->currvid, reqvid, data->rvo);
 
+	if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP))
+		rvomult = 2;
+	rvosteps *= rvomult;
 	rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
 	maxvid = 0x1f & (maxvid >> 16);
 	dprintk("ph1 maxvid=0x%x\n", maxvid);
@@ -351,7 +354,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data,
 			return 1;
 	}
 
-	while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
+	while ((rvosteps > 0) &&
+			((rvomult * data->rvo + data->currvid) > reqvid)) {
 		if (data->currvid == maxvid) {
 			rvosteps = 0;
 		} else {
@@ -384,13 +388,6 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 	u32 vcoreqfid, vcocurrfid, vcofiddiff;
 	u32 fid_interval, savevid = data->currvid;
 
-	if ((reqfid < HI_FID_TABLE_BOTTOM) &&
-	    (data->currfid < HI_FID_TABLE_BOTTOM)) {
-		printk(KERN_ERR PFX "ph2: illegal lo-lo transition "
-				"0x%x 0x%x\n", reqfid, data->currfid);
-		return 1;
-	}
-
 	if (data->currfid == reqfid) {
 		printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n",
 				data->currfid);
@@ -407,6 +404,9 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 	vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
 	    : vcoreqfid - vcocurrfid;
 
+	if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP))
+		vcofiddiff = 0;
+
 	while (vcofiddiff > 2) {
 		(data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
 
@@ -1081,14 +1081,6 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data,
 		return 0;
 	}
 
-	if ((fid < HI_FID_TABLE_BOTTOM) &&
-	    (data->currfid < HI_FID_TABLE_BOTTOM)) {
-		printk(KERN_ERR PFX
-		       "ignoring illegal change in lo freq table-%x to 0x%x\n",
-		       data->currfid, fid);
-		return 1;
-	}
-
 	dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
 		smp_processor_id(), fid, vid);
 	freqs.old = find_khz_freq_from_fid(data->currfid);
@@ -1267,7 +1259,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
 	static const char ACPI_PSS_BIOS_BUG_MSG[] =
 		KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
-		KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n";
+		FW_BUG PFX "Try again with latest BIOS.\n";
 	struct powernow_k8_data *data;
 	struct init_on_cpu init_on_cpu;
 	int rc;
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index c9c1190b5e1..02ce824073c 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -215,7 +215,8 @@ struct pst_s {
 
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg)
 
-static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+	u32 reqvid, u32 regfid);
 static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
 static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 284d1de968b..01213048f62 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -194,14 +194,14 @@ static void print_mce(struct mce *m)
 		       m->cs, m->ip);
 		if (m->cs == __KERNEL_CS)
 			print_symbol("{%s}", m->ip);
-		printk("\n");
+		printk(KERN_CONT "\n");
 	}
 	printk(KERN_EMERG "TSC %llx ", m->tsc);
 	if (m->addr)
-		printk("ADDR %llx ", m->addr);
+		printk(KERN_CONT "ADDR %llx ", m->addr);
 	if (m->misc)
-		printk("MISC %llx ", m->misc);
-	printk("\n");
+		printk(KERN_CONT "MISC %llx ", m->misc);
+	printk(KERN_CONT "\n");
 	printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
 			m->cpuvendor, m->cpuid, m->time, m->socketid,
 			m->apicid);
@@ -209,13 +209,13 @@ static void print_mce(struct mce *m)
 
 static void print_mce_head(void)
 {
-	printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n");
+	printk(KERN_EMERG "\nHARDWARE ERROR\n");
 }
 
 static void print_mce_tail(void)
 {
 	printk(KERN_EMERG "This is not a software problem!\n"
-	       KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+	       "Run through mcelog --ascii to decode and contact your hardware vendor\n");
 }
 
 #define PANIC_TIMEOUT 5 /* 5 seconds */
@@ -1117,7 +1117,7 @@ static void mcheck_timer(unsigned long data)
 		*n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
 
 	t->expires = jiffies + *n;
-	add_timer(t);
+	add_timer_on(t, smp_processor_id());
 }
 
 static void mce_do_trigger(struct work_struct *work)
@@ -1226,8 +1226,13 @@ static void mce_init(void)
 }
 
 /* Add per CPU specific workarounds here */
-static void mce_cpu_quirks(struct cpuinfo_x86 *c)
+static int mce_cpu_quirks(struct cpuinfo_x86 *c)
 {
+	if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
+		pr_info("MCE: unknown CPU type - not enabling MCE support.\n");
+		return -EOPNOTSUPP;
+	}
+
 	/* This should be disabled by the BIOS, but isn't always */
 	if (c->x86_vendor == X86_VENDOR_AMD) {
 		if (c->x86 == 15 && banks > 4) {
@@ -1273,11 +1278,20 @@ static void mce_cpu_quirks(struct cpuinfo_x86 *c)
 		if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) &&
 			monarch_timeout < 0)
 			monarch_timeout = USEC_PER_SEC;
+
+		/*
+		 * There are also broken BIOSes on some Pentium M and
+		 * earlier systems:
+		 */
+		if (c->x86 == 6 && c->x86_model <= 13 && mce_bootlog < 0)
+			mce_bootlog = 0;
 	}
 	if (monarch_timeout < 0)
 		monarch_timeout = 0;
 	if (mce_bootlog != 0)
 		mce_panic_timeout = 30;
+
+	return 0;
 }
 
 static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c)
@@ -1321,7 +1335,7 @@ static void mce_init_timer(void)
 		return;
 	setup_timer(t, mcheck_timer, smp_processor_id());
 	t->expires = round_jiffies(jiffies + *n);
-	add_timer(t);
+	add_timer_on(t, smp_processor_id());
 }
 
 /*
@@ -1338,11 +1352,10 @@ void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
 	if (!mce_available(c))
 		return;
 
-	if (mce_cap_init() < 0) {
+	if (mce_cap_init() < 0 || mce_cpu_quirks(c) < 0) {
 		mce_disabled = 1;
 		return;
 	}
-	mce_cpu_quirks(c);
 
 	machine_check_vector = do_machine_check;
 
@@ -1692,17 +1705,15 @@ static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
 				const char *buf, size_t siz)
 {
 	char *p;
-	int len;
 
 	strncpy(mce_helper, buf, sizeof(mce_helper));
 	mce_helper[sizeof(mce_helper)-1] = 0;
-	len = strlen(mce_helper);
 	p = strchr(mce_helper, '\n');
 
-	if (*p)
+	if (p)
 		*p = 0;
 
-	return len;
+	return strlen(mce_helper) + !!p;
 }
 
 static ssize_t set_ignore_ce(struct sys_device *s,
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index bff8dd191dd..5957a93e517 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -36,6 +36,7 @@
 
 static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
 static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
+static DEFINE_PER_CPU(bool, thermal_throttle_active);
 
 static atomic_t therm_throt_en		= ATOMIC_INIT(0);
 
@@ -96,27 +97,33 @@ static int therm_throt_process(int curr)
 {
 	unsigned int cpu = smp_processor_id();
 	__u64 tmp_jiffs = get_jiffies_64();
+	bool was_throttled = __get_cpu_var(thermal_throttle_active);
+	bool is_throttled = __get_cpu_var(thermal_throttle_active) = curr;
 
-	if (curr)
+	if (is_throttled)
 		__get_cpu_var(thermal_throttle_count)++;
 
-	if (time_before64(tmp_jiffs, __get_cpu_var(next_check)))
+	if (!(was_throttled ^ is_throttled) &&
+	    time_before64(tmp_jiffs, __get_cpu_var(next_check)))
 		return 0;
 
 	__get_cpu_var(next_check) = tmp_jiffs + CHECK_INTERVAL;
 
 	/* if we just entered the thermal event */
-	if (curr) {
+	if (is_throttled) {
 		printk(KERN_CRIT "CPU%d: Temperature above threshold, "
-		       "cpu clock throttled (total events = %lu)\n", cpu,
-		       __get_cpu_var(thermal_throttle_count));
+		       "cpu clock throttled (total events = %lu)\n",
+		       cpu, __get_cpu_var(thermal_throttle_count));
 
 		add_taint(TAINT_MACHINE_CHECK);
-	} else {
-		printk(KERN_CRIT "CPU%d: Temperature/speed normal\n", cpu);
+		return 1;
+	}
+	if (was_throttled) {
+		printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
+		return 1;
 	}
 
-	return 1;
+	return 0;
 }
 
 #ifdef CONFIG_SYSFS
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 76dfef23f78..900332b800f 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -55,6 +55,7 @@ struct x86_pmu {
 	int		num_counters_fixed;
 	int		counter_bits;
 	u64		counter_mask;
+	int		apic;
 	u64		max_period;
 	u64		intel_ctrl;
 };
@@ -66,6 +67,52 @@ static DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters) = {
 };
 
 /*
+ * Not sure about some of these
+ */
+static const u64 p6_perfmon_event_map[] =
+{
+  [PERF_COUNT_HW_CPU_CYCLES]		= 0x0079,
+  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
+  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0f2e,
+  [PERF_COUNT_HW_CACHE_MISSES]		= 0x012e,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
+  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
+  [PERF_COUNT_HW_BUS_CYCLES]		= 0x0062,
+};
+
+static u64 p6_pmu_event_map(int event)
+{
+	return p6_perfmon_event_map[event];
+}
+
+/*
+ * Counter setting that is specified not to count anything.
+ * We use this to effectively disable a counter.
+ *
+ * L2_RQSTS with 0 MESI unit mask.
+ */
+#define P6_NOP_COUNTER			0x0000002EULL
+
+static u64 p6_pmu_raw_event(u64 event)
+{
+#define P6_EVNTSEL_EVENT_MASK		0x000000FFULL
+#define P6_EVNTSEL_UNIT_MASK		0x0000FF00ULL
+#define P6_EVNTSEL_EDGE_MASK		0x00040000ULL
+#define P6_EVNTSEL_INV_MASK		0x00800000ULL
+#define P6_EVNTSEL_COUNTER_MASK		0xFF000000ULL
+
+#define P6_EVNTSEL_MASK			\
+	(P6_EVNTSEL_EVENT_MASK |	\
+	 P6_EVNTSEL_UNIT_MASK  |	\
+	 P6_EVNTSEL_EDGE_MASK  |	\
+	 P6_EVNTSEL_INV_MASK   |	\
+	 P6_EVNTSEL_COUNTER_MASK)
+
+	return event & P6_EVNTSEL_MASK;
+}
+
+
+/*
  * Intel PerfMon v3. Used on Core2 and later.
  */
 static const u64 intel_perfmon_event_map[] =
@@ -401,7 +448,7 @@ static const u64 amd_hw_cache_event_ids
 		[ C(RESULT_MISS)   ] = 0x0041, /* Data Cache Misses          */
 	},
 	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0042, /* Data Cache Refills from L2 */
+		[ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
 		[ C(RESULT_MISS)   ] = 0,
 	},
 	[ C(OP_PREFETCH) ] = {
@@ -567,6 +614,7 @@ static DEFINE_MUTEX(pmc_reserve_mutex);
 
 static bool reserve_pmc_hardware(void)
 {
+#ifdef CONFIG_X86_LOCAL_APIC
 	int i;
 
 	if (nmi_watchdog == NMI_LOCAL_APIC)
@@ -581,9 +629,11 @@ static bool reserve_pmc_hardware(void)
 		if (!reserve_evntsel_nmi(x86_pmu.eventsel + i))
 			goto eventsel_fail;
 	}
+#endif
 
 	return true;
 
+#ifdef CONFIG_X86_LOCAL_APIC
 eventsel_fail:
 	for (i--; i >= 0; i--)
 		release_evntsel_nmi(x86_pmu.eventsel + i);
@@ -598,10 +648,12 @@ perfctr_fail:
 		enable_lapic_nmi_watchdog();
 
 	return false;
+#endif
 }
 
 static void release_pmc_hardware(void)
 {
+#ifdef CONFIG_X86_LOCAL_APIC
 	int i;
 
 	for (i = 0; i < x86_pmu.num_counters; i++) {
@@ -611,6 +663,7 @@ static void release_pmc_hardware(void)
 
 	if (nmi_watchdog == NMI_LOCAL_APIC)
 		enable_lapic_nmi_watchdog();
+#endif
 }
 
 static void hw_perf_counter_destroy(struct perf_counter *counter)
@@ -666,6 +719,7 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 {
 	struct perf_counter_attr *attr = &counter->attr;
 	struct hw_perf_counter *hwc = &counter->hw;
+	u64 config;
 	int err;
 
 	if (!x86_pmu_initialized())
@@ -701,6 +755,15 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 		hwc->sample_period = x86_pmu.max_period;
 		hwc->last_period = hwc->sample_period;
 		atomic64_set(&hwc->period_left, hwc->sample_period);
+	} else {
+		/*
+		 * If we have a PMU initialized but no APIC
+		 * interrupts, we cannot sample hardware
+		 * counters (user-space has to fall back and
+		 * sample via a hrtimer based software counter):
+		 */
+		if (!x86_pmu.apic)
+			return -EOPNOTSUPP;
 	}
 
 	counter->destroy = hw_perf_counter_destroy;
@@ -718,14 +781,40 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 
 	if (attr->config >= x86_pmu.max_events)
 		return -EINVAL;
+
 	/*
 	 * The generic map:
 	 */
-	hwc->config |= x86_pmu.event_map(attr->config);
+	config = x86_pmu.event_map(attr->config);
+
+	if (config == 0)
+		return -ENOENT;
+
+	if (config == -1LL)
+		return -EINVAL;
+
+	hwc->config |= config;
 
 	return 0;
 }
 
+static void p6_pmu_disable_all(void)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	u64 val;
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+	barrier();
+
+	/* p6 only has one enable register */
+	rdmsrl(MSR_P6_EVNTSEL0, val);
+	val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+	wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
 static void intel_pmu_disable_all(void)
 {
 	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
@@ -767,6 +856,23 @@ void hw_perf_disable(void)
 	return x86_pmu.disable_all();
 }
 
+static void p6_pmu_enable_all(void)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	unsigned long val;
+
+	if (cpuc->enabled)
+		return;
+
+	cpuc->enabled = 1;
+	barrier();
+
+	/* p6 only has one enable register */
+	rdmsrl(MSR_P6_EVNTSEL0, val);
+	val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+	wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
 static void intel_pmu_enable_all(void)
 {
 	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
@@ -784,13 +890,13 @@ static void amd_pmu_enable_all(void)
 	barrier();
 
 	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+		struct perf_counter *counter = cpuc->counters[idx];
 		u64 val;
 
 		if (!test_bit(idx, cpuc->active_mask))
 			continue;
-		rdmsrl(MSR_K7_EVNTSEL0 + idx, val);
-		if (val & ARCH_PERFMON_EVENTSEL0_ENABLE)
-			continue;
+
+		val = counter->hw.config;
 		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
 		wrmsrl(MSR_K7_EVNTSEL0 + idx, val);
 	}
@@ -819,16 +925,13 @@ static inline void intel_pmu_ack_status(u64 ack)
 
 static inline void x86_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 {
-	int err;
-	err = checking_wrmsrl(hwc->config_base + idx,
+	(void)checking_wrmsrl(hwc->config_base + idx,
 			      hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE);
 }
 
 static inline void x86_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
 {
-	int err;
-	err = checking_wrmsrl(hwc->config_base + idx,
-			      hwc->config);
+	(void)checking_wrmsrl(hwc->config_base + idx, hwc->config);
 }
 
 static inline void
@@ -836,13 +939,24 @@ intel_pmu_disable_fixed(struct hw_perf_counter *hwc, int __idx)
 {
 	int idx = __idx - X86_PMC_IDX_FIXED;
 	u64 ctrl_val, mask;
-	int err;
 
 	mask = 0xfULL << (idx * 4);
 
 	rdmsrl(hwc->config_base, ctrl_val);
 	ctrl_val &= ~mask;
-	err = checking_wrmsrl(hwc->config_base, ctrl_val);
+	(void)checking_wrmsrl(hwc->config_base, ctrl_val);
+}
+
+static inline void
+p6_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	u64 val = P6_NOP_COUNTER;
+
+	if (cpuc->enabled)
+		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+	(void)checking_wrmsrl(hwc->config_base + idx, val);
 }
 
 static inline void
@@ -912,6 +1026,8 @@ x86_perf_counter_set_period(struct perf_counter *counter,
 	err = checking_wrmsrl(hwc->counter_base + idx,
 			     (u64)(-left) & x86_pmu.counter_mask);
 
+	perf_counter_update_userpage(counter);
+
 	return ret;
 }
 
@@ -941,6 +1057,19 @@ intel_pmu_enable_fixed(struct hw_perf_counter *hwc, int __idx)
 	err = checking_wrmsrl(hwc->config_base, ctrl_val);
 }
 
+static void p6_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	u64 val;
+
+	val = hwc->config;
+	if (cpuc->enabled)
+		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+	(void)checking_wrmsrl(hwc->config_base + idx, val);
+}
+
+
 static void intel_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 {
 	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
@@ -957,8 +1086,6 @@ static void amd_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 
 	if (cpuc->enabled)
 		x86_pmu_enable_counter(hwc, idx);
-	else
-		x86_pmu_disable_counter(hwc, idx);
 }
 
 static int
@@ -969,13 +1096,6 @@ fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc)
 	if (!x86_pmu.num_counters_fixed)
 		return -1;
 
-	/*
-	 * Quirk, IA32_FIXED_CTRs do not work on current Atom processors:
-	 */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
-					boot_cpu_data.x86_model == 28)
-		return -1;
-
 	event = hwc->config & ARCH_PERFMON_EVENT_MASK;
 
 	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
@@ -1041,6 +1161,8 @@ try_generic:
 	x86_perf_counter_set_period(counter, hwc, idx);
 	x86_pmu.enable(hwc, idx);
 
+	perf_counter_update_userpage(counter);
+
 	return 0;
 }
 
@@ -1133,6 +1255,8 @@ static void x86_pmu_disable(struct perf_counter *counter)
 	x86_perf_counter_update(counter, hwc, idx);
 	cpuc->counters[idx] = NULL;
 	clear_bit(idx, cpuc->used_mask);
+
+	perf_counter_update_userpage(counter);
 }
 
 /*
@@ -1177,6 +1301,49 @@ static void intel_pmu_reset(void)
 	local_irq_restore(flags);
 }
 
+static int p6_pmu_handle_irq(struct pt_regs *regs)
+{
+	struct perf_sample_data data;
+	struct cpu_hw_counters *cpuc;
+	struct perf_counter *counter;
+	struct hw_perf_counter *hwc;
+	int idx, handled = 0;
+	u64 val;
+
+	data.regs = regs;
+	data.addr = 0;
+
+	cpuc = &__get_cpu_var(cpu_hw_counters);
+
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		counter = cpuc->counters[idx];
+		hwc = &counter->hw;
+
+		val = x86_perf_counter_update(counter, hwc, idx);
+		if (val & (1ULL << (x86_pmu.counter_bits - 1)))
+			continue;
+
+		/*
+		 * counter overflow
+		 */
+		handled		= 1;
+		data.period	= counter->hw.last_period;
+
+		if (!x86_perf_counter_set_period(counter, hwc, idx))
+			continue;
+
+		if (perf_counter_overflow(counter, 1, &data))
+			p6_pmu_disable_counter(hwc, idx);
+	}
+
+	if (handled)
+		inc_irq_stat(apic_perf_irqs);
+
+	return handled;
+}
 
 /*
  * This handler is triggered by the local APIC, so the APIC IRQ handling
@@ -1186,14 +1353,13 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 {
 	struct perf_sample_data data;
 	struct cpu_hw_counters *cpuc;
-	int bit, cpu, loops;
+	int bit, loops;
 	u64 ack, status;
 
 	data.regs = regs;
 	data.addr = 0;
 
-	cpu = smp_processor_id();
-	cpuc = &per_cpu(cpu_hw_counters, cpu);
+	cpuc = &__get_cpu_var(cpu_hw_counters);
 
 	perf_disable();
 	status = intel_pmu_get_status();
@@ -1250,14 +1416,13 @@ static int amd_pmu_handle_irq(struct pt_regs *regs)
 	struct cpu_hw_counters *cpuc;
 	struct perf_counter *counter;
 	struct hw_perf_counter *hwc;
-	int cpu, idx, handled = 0;
+	int idx, handled = 0;
 	u64 val;
 
 	data.regs = regs;
 	data.addr = 0;
 
-	cpu = smp_processor_id();
-	cpuc = &per_cpu(cpu_hw_counters, cpu);
+	cpuc = &__get_cpu_var(cpu_hw_counters);
 
 	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
 		if (!test_bit(idx, cpuc->active_mask))
@@ -1300,18 +1465,22 @@ void smp_perf_pending_interrupt(struct pt_regs *regs)
 
 void set_perf_counter_pending(void)
 {
+#ifdef CONFIG_X86_LOCAL_APIC
 	apic->send_IPI_self(LOCAL_PENDING_VECTOR);
+#endif
 }
 
 void perf_counters_lapic_init(void)
 {
-	if (!x86_pmu_initialized())
+#ifdef CONFIG_X86_LOCAL_APIC
+	if (!x86_pmu.apic || !x86_pmu_initialized())
 		return;
 
 	/*
 	 * Always use NMI for PMU
 	 */
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
+#endif
 }
 
 static int __kprobes
@@ -1335,7 +1504,9 @@ perf_counter_nmi_handler(struct notifier_block *self,
 
 	regs = args->regs;
 
+#ifdef CONFIG_X86_LOCAL_APIC
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
+#endif
 	/*
 	 * Can't rely on the handled return value to say it was our NMI, two
 	 * counters could trigger 'simultaneously' raising two back-to-back NMIs.
@@ -1354,6 +1525,33 @@ static __read_mostly struct notifier_block perf_counter_nmi_notifier = {
 	.priority		= 1
 };
 
+static struct x86_pmu p6_pmu = {
+	.name			= "p6",
+	.handle_irq		= p6_pmu_handle_irq,
+	.disable_all		= p6_pmu_disable_all,
+	.enable_all		= p6_pmu_enable_all,
+	.enable			= p6_pmu_enable_counter,
+	.disable		= p6_pmu_disable_counter,
+	.eventsel		= MSR_P6_EVNTSEL0,
+	.perfctr		= MSR_P6_PERFCTR0,
+	.event_map		= p6_pmu_event_map,
+	.raw_event		= p6_pmu_raw_event,
+	.max_events		= ARRAY_SIZE(p6_perfmon_event_map),
+	.apic			= 1,
+	.max_period		= (1ULL << 31) - 1,
+	.version		= 0,
+	.num_counters		= 2,
+	/*
+	 * Counters have 40 bits implemented. However they are designed such
+	 * that bits [32-39] are sign extensions of bit 31. As such the
+	 * effective width of a counter for P6-like PMU is 32 bits only.
+	 *
+	 * See IA-32 Intel Architecture Software developer manual Vol 3B
+	 */
+	.counter_bits		= 32,
+	.counter_mask		= (1ULL << 32) - 1,
+};
+
 static struct x86_pmu intel_pmu = {
 	.name			= "Intel",
 	.handle_irq		= intel_pmu_handle_irq,
@@ -1366,6 +1564,7 @@ static struct x86_pmu intel_pmu = {
 	.event_map		= intel_pmu_event_map,
 	.raw_event		= intel_pmu_raw_event,
 	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
+	.apic			= 1,
 	/*
 	 * Intel PMCs cannot be accessed sanely above 32 bit width,
 	 * so we install an artificial 1<<31 period regardless of
@@ -1389,10 +1588,43 @@ static struct x86_pmu amd_pmu = {
 	.num_counters		= 4,
 	.counter_bits		= 48,
 	.counter_mask		= (1ULL << 48) - 1,
+	.apic			= 1,
 	/* use highest bit to detect overflow */
 	.max_period		= (1ULL << 47) - 1,
 };
 
+static int p6_pmu_init(void)
+{
+	switch (boot_cpu_data.x86_model) {
+	case 1:
+	case 3:  /* Pentium Pro */
+	case 5:
+	case 6:  /* Pentium II */
+	case 7:
+	case 8:
+	case 11: /* Pentium III */
+		break;
+	case 9:
+	case 13:
+		/* Pentium M */
+		break;
+	default:
+		pr_cont("unsupported p6 CPU model %d ",
+			boot_cpu_data.x86_model);
+		return -ENODEV;
+	}
+
+	x86_pmu = p6_pmu;
+
+	if (!cpu_has_apic) {
+		pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n");
+		pr_info("no hardware sampling interrupt available.\n");
+		x86_pmu.apic = 0;
+	}
+
+	return 0;
+}
+
 static int intel_pmu_init(void)
 {
 	union cpuid10_edx edx;
@@ -1401,8 +1633,14 @@ static int intel_pmu_init(void)
 	unsigned int ebx;
 	int version;
 
-	if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
+	if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
+		/* check for P6 processor family */
+	   if (boot_cpu_data.x86 == 6) {
+		return p6_pmu_init();
+	   } else {
 		return -ENODEV;
+	   }
+	}
 
 	/*
 	 * Check whether the Architectural PerfMon supports
@@ -1428,8 +1666,6 @@ static int intel_pmu_init(void)
 	 */
 	x86_pmu.num_counters_fixed	= max((int)edx.split.num_counters_fixed, 3);
 
-	rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
-
 	/*
 	 * Install the hw-cache-events table:
 	 */
@@ -1499,21 +1735,22 @@ void __init init_hw_perf_counters(void)
 	pr_cont("%s PMU driver.\n", x86_pmu.name);
 
 	if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) {
-		x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
 		WARN(1, KERN_ERR "hw perf counters %d > max(%d), clipping!",
 		     x86_pmu.num_counters, X86_PMC_MAX_GENERIC);
+		x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
 	}
 	perf_counter_mask = (1 << x86_pmu.num_counters) - 1;
 	perf_max_counters = x86_pmu.num_counters;
 
 	if (x86_pmu.num_counters_fixed > X86_PMC_MAX_FIXED) {
-		x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
 		WARN(1, KERN_ERR "hw perf counters fixed %d > max(%d), clipping!",
 		     x86_pmu.num_counters_fixed, X86_PMC_MAX_FIXED);
+		x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
 	}
 
 	perf_counter_mask |=
 		((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED;
+	x86_pmu.intel_ctrl = perf_counter_mask;
 
 	perf_counters_lapic_init();
 	register_die_notifier(&perf_counter_nmi_notifier);
@@ -1563,6 +1800,7 @@ void callchain_store(struct perf_callchain_entry *entry, u64 ip)
 
 static DEFINE_PER_CPU(struct perf_callchain_entry, irq_entry);
 static DEFINE_PER_CPU(struct perf_callchain_entry, nmi_entry);
+static DEFINE_PER_CPU(int, in_nmi_frame);
 
 
 static void
@@ -1578,7 +1816,9 @@ static void backtrace_warning(void *data, char *msg)
 
 static int backtrace_stack(void *data, char *name)
 {
-	/* Process all stacks: */
+	per_cpu(in_nmi_frame, smp_processor_id()) =
+			x86_is_stack_id(NMI_STACK, name);
+
 	return 0;
 }
 
@@ -1586,6 +1826,9 @@ static void backtrace_address(void *data, unsigned long addr, int reliable)
 {
 	struct perf_callchain_entry *entry = data;
 
+	if (per_cpu(in_nmi_frame, smp_processor_id()))
+		return;
+
 	if (reliable)
 		callchain_store(entry, addr);
 }
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 5c481f6205b..e60ed740d2b 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -803,8 +803,3 @@ int __kprobes lapic_wd_event(unsigned nmi_hz)
 	wd_ops->rearm(wd, nmi_hz);
 	return 1;
 }
-
-int lapic_watchdog_ok(void)
-{
-	return wd_ops != NULL;
-}
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 95ea5fa7d44..c8405718a4c 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -22,6 +22,7 @@
 #include "dumpstack.h"
 
 int panic_on_unrecovered_nmi;
+int panic_on_io_nmi;
 unsigned int code_bytes = 64;
 int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE;
 static int die_counter;
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index d593cd1f58d..bca5fba91c9 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -19,6 +19,12 @@
 
 #include "dumpstack.h"
 
+/* Just a stub for now */
+int x86_is_stack_id(int id, char *name)
+{
+	return 0;
+}
+
 void dump_trace(struct task_struct *task, struct pt_regs *regs,
 		unsigned long *stack, unsigned long bp,
 		const struct stacktrace_ops *ops, void *data)
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index d35db5993fd..54b0a327676 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -19,10 +19,8 @@
 
 #include "dumpstack.h"
 
-static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
-					unsigned *usedp, char **idp)
-{
-	static char ids[][8] = {
+
+static char x86_stack_ids[][8] = {
 		[DEBUG_STACK - 1] = "#DB",
 		[NMI_STACK - 1] = "NMI",
 		[DOUBLEFAULT_STACK - 1] = "#DF",
@@ -33,6 +31,15 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
 			N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
 #endif
 	};
+
+int x86_is_stack_id(int id, char *name)
+{
+	return x86_stack_ids[id - 1] == name;
+}
+
+static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
+					unsigned *usedp, char **idp)
+{
 	unsigned k;
 
 	/*
@@ -61,7 +68,7 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
 			if (*usedp & (1U << k))
 				break;
 			*usedp |= 1U << k;
-			*idp = ids[k];
+			*idp = x86_stack_ids[k];
 			return (unsigned long *)end;
 		}
 		/*
@@ -81,12 +88,13 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
 			do {
 				++j;
 				end -= EXCEPTION_STKSZ;
-				ids[j][4] = '1' + (j - N_EXCEPTION_STACKS);
+				x86_stack_ids[j][4] = '1' +
+						(j - N_EXCEPTION_STACKS);
 			} while (stack < end - EXCEPTION_STKSZ);
 			if (*usedp & (1U << j))
 				break;
 			*usedp |= 1U << j;
-			*idp = ids[j];
+			*idp = x86_stack_ids[j];
 			return (unsigned long *)end;
 		}
 #endif
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 7271fa33d79..5cb5725b2ba 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -627,10 +627,9 @@ __init void e820_setup_gap(void)
 #ifdef CONFIG_X86_64
 	if (!found) {
 		gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
-		printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
-		       "address range\n"
-		       KERN_ERR "PCI: Unassigned devices with 32bit resource "
-		       "registers may break!\n");
+		printk(KERN_ERR
+	"PCI: Warning: Cannot find a gap in the 32bit address range\n"
+	"PCI: Unassigned devices with 32bit resource registers may break!\n");
 	}
 #endif
 
@@ -1383,6 +1382,8 @@ static unsigned long ram_alignment(resource_size_t pos)
 	return 32*1024*1024;
 }
 
+#define MAX_RESOURCE_SIZE ((resource_size_t)-1)
+
 void __init e820_reserve_resources_late(void)
 {
 	int i;
@@ -1400,17 +1401,19 @@ void __init e820_reserve_resources_late(void)
 	 * avoid stolen RAM:
 	 */
 	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *entry = &e820_saved.map[i];
-		resource_size_t start, end;
+		struct e820entry *entry = &e820.map[i];
+		u64 start, end;
 
 		if (entry->type != E820_RAM)
 			continue;
 		start = entry->addr + entry->size;
-		end = round_up(start, ram_alignment(start));
-		if (start == end)
+		end = round_up(start, ram_alignment(start)) - 1;
+		if (end > MAX_RESOURCE_SIZE)
+			end = MAX_RESOURCE_SIZE;
+		if (start >= end)
 			continue;
-		reserve_region_with_split(&iomem_resource, start,
-						  end - 1, "RAM buffer");
+		reserve_region_with_split(&iomem_resource, start, end,
+					  "RAM buffer");
 	}
 }
 
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 96f7ac0bbf0..fe26ba3e345 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -354,7 +354,7 @@ void __init efi_init(void)
 	 */
 	c16 = tmp = early_ioremap(efi.systab->fw_vendor, 2);
 	if (c16) {
-		for (i = 0; i < sizeof(vendor) && *c16; ++i)
+		for (i = 0; i < sizeof(vendor) - 1 && *c16; ++i)
 			vendor[i] = *c16++;
 		vendor[i] = '\0';
 	} else
@@ -512,7 +512,7 @@ void __init efi_enter_virtual_mode(void)
 			&& end_pfn <= max_pfn_mapped))
 			va = __va(md->phys_addr);
 		else
-			va = efi_ioremap(md->phys_addr, size);
+			va = efi_ioremap(md->phys_addr, size, md->type);
 
 		md->virt_addr = (u64) (unsigned long) va;
 
diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c
index 22c3b7828c5..ac0621a7ac3 100644
--- a/arch/x86/kernel/efi_64.c
+++ b/arch/x86/kernel/efi_64.c
@@ -98,10 +98,14 @@ void __init efi_call_phys_epilog(void)
 	early_runtime_code_mapping_set_exec(0);
 }
 
-void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
+void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
+				 u32 type)
 {
 	unsigned long last_map_pfn;
 
+	if (type == EFI_MEMORY_MAPPED_IO)
+		return ioremap(phys_addr, size);
+
 	last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
 	if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size)
 		return NULL;
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 8663afb5653..cc827ac9e8d 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -261,9 +261,7 @@ page_pde_offset = (__PAGE_OFFSET >> 20);
  * which will be freed later
  */
 
-#ifndef CONFIG_HOTPLUG_CPU
-.section .init.text,"ax",@progbits
-#endif
+__CPUINIT
 
 #ifdef CONFIG_SMP
 ENTRY(startup_32_smp)
@@ -602,7 +600,7 @@ ignore_int:
 #endif
 	iret
 
-.section .cpuinit.data,"wa"
+	__REFDATA
 .align 4
 ENTRY(initial_code)
 	.long i386_start_kernel
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 696f0e475c2..92b7703d3d5 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -187,7 +187,7 @@ static void __init apic_intr_init(void)
 #ifdef CONFIG_X86_THERMAL_VECTOR
 	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
 #endif
-#ifdef CONFIG_X86_THRESHOLD
+#ifdef CONFIG_X86_MCE_THRESHOLD
 	alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
 #endif
 #if defined(CONFIG_X86_NEW_MCE) && defined(CONFIG_X86_LOCAL_APIC)
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index a78ecad0c90..c664d515f61 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -200,7 +200,7 @@ static void kvm_leave_lazy_mmu(void)
 	state->mode = paravirt_get_lazy_mode();
 }
 
-static void paravirt_ops_setup(void)
+static void __init paravirt_ops_setup(void)
 {
 	pv_info.name = "KVM";
 	pv_info.paravirt_enabled = 1;
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 846510b78a0..2a62d843f01 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -347,7 +347,7 @@ static irqreturn_t mfgpt_tick(int irq, void *dev_id)
 
 static struct irqaction mfgptirq  = {
 	.handler = mfgpt_tick,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
 	.name = "mfgpt-timer"
 };
 
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 47630479b06..1a041bcf506 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -211,11 +211,11 @@ static __init int iommu_setup(char *p)
 #ifdef CONFIG_SWIOTLB
 		if (!strncmp(p, "soft", 4))
 			swiotlb = 1;
+#endif
 		if (!strncmp(p, "pt", 2)) {
 			iommu_pass_through = 1;
 			return 1;
 		}
-#endif
 
 		gart_parse_options(p);
 
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index cfd9f906389..d2e56b8f48e 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -675,7 +675,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
  nommu:
 	/* Should not happen anymore */
 	printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
-	       KERN_WARNING "falling back to iommu=soft.\n");
+	       "falling back to iommu=soft.\n");
 	return -1;
 }
 
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 994dd6a4a2a..071166a4ba8 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -519,16 +519,12 @@ static void c1e_idle(void)
 		if (!cpumask_test_cpu(cpu, c1e_mask)) {
 			cpumask_set_cpu(cpu, c1e_mask);
 			/*
-			 * Force broadcast so ACPI can not interfere. Needs
-			 * to run with interrupts enabled as it uses
-			 * smp_function_call.
+			 * Force broadcast so ACPI can not interfere.
 			 */
-			local_irq_enable();
 			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
 					   &cpu);
 			printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
 			       cpu);
-			local_irq_disable();
 		}
 		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
 
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index 4f9c55f3a7c..03801f2f761 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -60,7 +60,7 @@ static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
 		"adc  %5,%%edx ; "
 		: "=A" (product), "=r" (tmp1), "=r" (tmp2)
 		: "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif __x86_64__
+#elif defined(__x86_64__)
 	__asm__ (
 		"mul %%rdx ; shrd $32,%%rdx,%%rax"
 		: "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d2d1ce8170f..a06e8d10184 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -3,6 +3,7 @@
 #include <linux/init.h>
 #include <linux/pm.h>
 #include <linux/efi.h>
+#include <linux/dmi.h>
 #include <acpi/reboot.h>
 #include <asm/io.h>
 #include <asm/apic.h>
@@ -17,7 +18,6 @@
 #include <asm/cpu.h>
 
 #ifdef CONFIG_X86_32
-# include <linux/dmi.h>
 # include <linux/ctype.h>
 # include <linux/mc146818rtc.h>
 #else
@@ -249,6 +249,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
 		},
 	},
+	{	/* Handle problems with rebooting on CompuLab SBC-FITPC2 */
+		.callback = set_bios_reboot,
+		.ident = "CompuLab SBC-FITPC2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "CompuLab"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"),
+		},
+	},
 	{ }
 };
 
@@ -396,6 +404,46 @@ EXPORT_SYMBOL(machine_real_restart);
 
 #endif /* CONFIG_X86_32 */
 
+/*
+ * Some Apple MacBook and MacBookPro's needs reboot=p to be able to reboot
+ */
+static int __init set_pci_reboot(const struct dmi_system_id *d)
+{
+	if (reboot_type != BOOT_CF9) {
+		reboot_type = BOOT_CF9;
+		printk(KERN_INFO "%s series board detected. "
+		       "Selecting PCI-method for reboots.\n", d->ident);
+	}
+	return 0;
+}
+
+static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
+	{	/* Handle problems with rebooting on Apple MacBook5 */
+		.callback = set_pci_reboot,
+		.ident = "Apple MacBook5",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5"),
+		},
+	},
+	{	/* Handle problems with rebooting on Apple MacBookPro5 */
+		.callback = set_pci_reboot,
+		.ident = "Apple MacBookPro5",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"),
+		},
+	},
+	{ }
+};
+
+static int __init pci_reboot_init(void)
+{
+	dmi_check_system(pci_reboot_dmi_table);
+	return 0;
+}
+core_initcall(pci_reboot_init);
+
 static inline void kb_wait(void)
 {
 	int i;
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index be5ae80f897..63f32d220ef 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -289,6 +289,20 @@ void * __init extend_brk(size_t size, size_t align)
 	return ret;
 }
 
+#ifdef CONFIG_X86_64
+static void __init init_gbpages(void)
+{
+	if (direct_gbpages && cpu_has_gbpages)
+		printk(KERN_INFO "Using GB pages for direct mapping\n");
+	else
+		direct_gbpages = 0;
+}
+#else
+static inline void init_gbpages(void)
+{
+}
+#endif
+
 static void __init reserve_brk(void)
 {
 	if (_brk_end > _brk_start)
@@ -658,6 +672,19 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
 			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
 		},
 	},
+	{
+	/*
+	 * AMI BIOS with low memory corruption was found on Intel DG45ID board.
+	 * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
+	 * match only DMI_BOARD_NAME and see if there is more bad products
+	 * with this vendor.
+	 */
+		.callback = dmi_low_memory_corruption,
+		.ident = "AMI BIOS",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
+		},
+	},
 #endif
 	{}
 };
@@ -871,6 +898,8 @@ void __init setup_arch(char **cmdline_p)
 
 	reserve_brk();
 
+	init_gbpages();
+
 	/* max_pfn_mapped is updated here */
 	max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
 	max_pfn_mapped = max_low_pfn_mapped;
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 9c3f0823e6a..07d81916f21 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -124,7 +124,7 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 }
 
 /*
- * Remap allocator
+ * Large page remap allocator
  *
  * This allocator uses PMD page as unit.  A PMD page is allocated for
  * each cpu and each is remapped into vmalloc area using PMD mapping.
@@ -137,105 +137,185 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
  * better than only using 4k mappings while still being NUMA friendly.
  */
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-static size_t pcpur_size __initdata;
-static void **pcpur_ptrs __initdata;
+struct pcpul_ent {
+	unsigned int	cpu;
+	void		*ptr;
+};
+
+static size_t pcpul_size;
+static struct pcpul_ent *pcpul_map;
+static struct vm_struct pcpul_vm;
 
-static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
+static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
 {
 	size_t off = (size_t)pageno << PAGE_SHIFT;
 
-	if (off >= pcpur_size)
+	if (off >= pcpul_size)
 		return NULL;
 
-	return virt_to_page(pcpur_ptrs[cpu] + off);
+	return virt_to_page(pcpul_map[cpu].ptr + off);
 }
 
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 {
-	static struct vm_struct vm;
-	size_t ptrs_size, dyn_size;
+	size_t map_size, dyn_size;
 	unsigned int cpu;
+	int i, j;
 	ssize_t ret;
 
-	/*
-	 * If large page isn't supported, there's no benefit in doing
-	 * this.  Also, on non-NUMA, embedding is better.
-	 *
-	 * NOTE: disabled for now.
-	 */
-	if (true || !cpu_has_pse || !pcpu_need_numa())
+	if (!chosen) {
+		size_t vm_size = VMALLOC_END - VMALLOC_START;
+		size_t tot_size = nr_cpu_ids * PMD_SIZE;
+
+		/* on non-NUMA, embedding is better */
+		if (!pcpu_need_numa())
+			return -EINVAL;
+
+		/* don't consume more than 20% of vmalloc area */
+		if (tot_size > vm_size / 5) {
+			pr_info("PERCPU: too large chunk size %zuMB for "
+				"large page remap\n", tot_size >> 20);
+			return -EINVAL;
+		}
+	}
+
+	/* need PSE */
+	if (!cpu_has_pse) {
+		pr_warning("PERCPU: lpage allocator requires PSE\n");
 		return -EINVAL;
+	}
 
 	/*
 	 * Currently supports only single page.  Supporting multiple
 	 * pages won't be too difficult if it ever becomes necessary.
 	 */
-	pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+	pcpul_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
 			       PERCPU_DYNAMIC_RESERVE);
-	if (pcpur_size > PMD_SIZE) {
+	if (pcpul_size > PMD_SIZE) {
 		pr_warning("PERCPU: static data is larger than large page, "
 			   "can't use large page\n");
 		return -EINVAL;
 	}
-	dyn_size = pcpur_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
+	dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
 
 	/* allocate pointer array and alloc large pages */
-	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
-	pcpur_ptrs = alloc_bootmem(ptrs_size);
+	map_size = PFN_ALIGN(nr_cpu_ids * sizeof(pcpul_map[0]));
+	pcpul_map = alloc_bootmem(map_size);
 
 	for_each_possible_cpu(cpu) {
-		pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE);
-		if (!pcpur_ptrs[cpu])
+		pcpul_map[cpu].cpu = cpu;
+		pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE,
+							PMD_SIZE);
+		if (!pcpul_map[cpu].ptr) {
+			pr_warning("PERCPU: failed to allocate large page "
+				   "for cpu%u\n", cpu);
 			goto enomem;
+		}
 
 		/*
-		 * Only use pcpur_size bytes and give back the rest.
+		 * Only use pcpul_size bytes and give back the rest.
 		 *
 		 * Ingo: The 2MB up-rounding bootmem is needed to make
 		 * sure the partial 2MB page is still fully RAM - it's
 		 * not well-specified to have a PAT-incompatible area
 		 * (unmapped RAM, device memory, etc.) in that hole.
 		 */
-		free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size),
-			     PMD_SIZE - pcpur_size);
+		free_bootmem(__pa(pcpul_map[cpu].ptr + pcpul_size),
+			     PMD_SIZE - pcpul_size);
 
-		memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size);
+		memcpy(pcpul_map[cpu].ptr, __per_cpu_load, static_size);
 	}
 
 	/* allocate address and map */
-	vm.flags = VM_ALLOC;
-	vm.size = num_possible_cpus() * PMD_SIZE;
-	vm_area_register_early(&vm, PMD_SIZE);
+	pcpul_vm.flags = VM_ALLOC;
+	pcpul_vm.size = nr_cpu_ids * PMD_SIZE;
+	vm_area_register_early(&pcpul_vm, PMD_SIZE);
 
 	for_each_possible_cpu(cpu) {
-		pmd_t *pmd;
+		pmd_t *pmd, pmd_v;
 
-		pmd = populate_extra_pmd((unsigned long)vm.addr
-					 + cpu * PMD_SIZE);
-		set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpur_ptrs[cpu])),
-				     PAGE_KERNEL_LARGE));
+		pmd = populate_extra_pmd((unsigned long)pcpul_vm.addr +
+					 cpu * PMD_SIZE);
+		pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpul_map[cpu].ptr)),
+				PAGE_KERNEL_LARGE);
+		set_pmd(pmd, pmd_v);
 	}
 
 	/* we're ready, commit */
 	pr_info("PERCPU: Remapped at %p with large pages, static data "
-		"%zu bytes\n", vm.addr, static_size);
+		"%zu bytes\n", pcpul_vm.addr, static_size);
 
-	ret = pcpu_setup_first_chunk(pcpur_get_page, static_size,
+	ret = pcpu_setup_first_chunk(pcpul_get_page, static_size,
 				     PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
-				     PMD_SIZE, vm.addr, NULL);
-	goto out_free_ar;
+				     PMD_SIZE, pcpul_vm.addr, NULL);
+
+	/* sort pcpul_map array for pcpu_lpage_remapped() */
+	for (i = 0; i < nr_cpu_ids - 1; i++)
+		for (j = i + 1; j < nr_cpu_ids; j++)
+			if (pcpul_map[i].ptr > pcpul_map[j].ptr) {
+				struct pcpul_ent tmp = pcpul_map[i];
+				pcpul_map[i] = pcpul_map[j];
+				pcpul_map[j] = tmp;
+			}
+
+	return ret;
 
 enomem:
 	for_each_possible_cpu(cpu)
-		if (pcpur_ptrs[cpu])
-			free_bootmem(__pa(pcpur_ptrs[cpu]), PMD_SIZE);
-	ret = -ENOMEM;
-out_free_ar:
-	free_bootmem(__pa(pcpur_ptrs), ptrs_size);
-	return ret;
+		if (pcpul_map[cpu].ptr)
+			free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size);
+	free_bootmem(__pa(pcpul_map), map_size);
+	return -ENOMEM;
+}
+
+/**
+ * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area
+ * @kaddr: the kernel address in question
+ *
+ * Determine whether @kaddr falls in the pcpul recycled area.  This is
+ * used by pageattr to detect VM aliases and break up the pcpu PMD
+ * mapping such that the same physical page is not mapped under
+ * different attributes.
+ *
+ * The recycled area is always at the tail of a partially used PMD
+ * page.
+ *
+ * RETURNS:
+ * Address of corresponding remapped pcpu address if match is found;
+ * otherwise, NULL.
+ */
+void *pcpu_lpage_remapped(void *kaddr)
+{
+	void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
+	unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
+	int left = 0, right = nr_cpu_ids - 1;
+	int pos;
+
+	/* pcpul in use at all? */
+	if (!pcpul_map)
+		return NULL;
+
+	/* okay, perform binary search */
+	while (left <= right) {
+		pos = (left + right) / 2;
+
+		if (pcpul_map[pos].ptr < pmd_addr)
+			left = pos + 1;
+		else if (pcpul_map[pos].ptr > pmd_addr)
+			right = pos - 1;
+		else {
+			/* it shouldn't be in the area for the first chunk */
+			WARN_ON(offset < pcpul_size);
+
+			return pcpul_vm.addr +
+				pcpul_map[pos].cpu * PMD_SIZE + offset;
+		}
+	}
+
+	return NULL;
 }
 #else
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 {
 	return -EINVAL;
 }
@@ -249,7 +329,7 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
  * mapping so that it can use PMD mapping without additional TLB
  * pressure.
  */
-static ssize_t __init setup_pcpu_embed(size_t static_size)
+static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 
@@ -258,7 +338,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size)
 	 * this.  Also, embedding allocation doesn't play well with
 	 * NUMA.
 	 */
-	if (!cpu_has_pse || pcpu_need_numa())
+	if (!chosen && (!cpu_has_pse || pcpu_need_numa()))
 		return -EINVAL;
 
 	return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
@@ -297,7 +377,7 @@ static ssize_t __init setup_pcpu_4k(size_t static_size)
 	pcpu4k_nr_static_pages = PFN_UP(static_size);
 
 	/* unaligned allocations can't be freed, round up to page size */
-	pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * num_possible_cpus()
+	pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * nr_cpu_ids
 			       * sizeof(pcpu4k_pages[0]));
 	pcpu4k_pages = alloc_bootmem(pages_size);
 
@@ -308,8 +388,11 @@ static ssize_t __init setup_pcpu_4k(size_t static_size)
 			void *ptr;
 
 			ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE);
-			if (!ptr)
+			if (!ptr) {
+				pr_warning("PERCPU: failed to allocate "
+					   "4k page for cpu%u\n", cpu);
 				goto enomem;
+			}
 
 			memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE);
 			pcpu4k_pages[j++] = virt_to_page(ptr);
@@ -333,6 +416,16 @@ out_free_ar:
 	return ret;
 }
 
+/* for explicit first chunk allocator selection */
+static char pcpu_chosen_alloc[16] __initdata;
+
+static int __init percpu_alloc_setup(char *str)
+{
+	strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1);
+	return 0;
+}
+early_param("percpu_alloc", percpu_alloc_setup);
+
 static inline void setup_percpu_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
@@ -346,11 +439,6 @@ static inline void setup_percpu_segment(int cpu)
 #endif
 }
 
-/*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
- */
 void __init setup_per_cpu_areas(void)
 {
 	size_t static_size = __per_cpu_end - __per_cpu_start;
@@ -367,9 +455,26 @@ void __init setup_per_cpu_areas(void)
 	 * of large page mappings.  Please read comments on top of
 	 * each allocator for details.
 	 */
-	ret = setup_pcpu_remap(static_size);
-	if (ret < 0)
-		ret = setup_pcpu_embed(static_size);
+	ret = -EINVAL;
+	if (strlen(pcpu_chosen_alloc)) {
+		if (strcmp(pcpu_chosen_alloc, "4k")) {
+			if (!strcmp(pcpu_chosen_alloc, "lpage"))
+				ret = setup_pcpu_lpage(static_size, true);
+			else if (!strcmp(pcpu_chosen_alloc, "embed"))
+				ret = setup_pcpu_embed(static_size, true);
+			else
+				pr_warning("PERCPU: unknown allocator %s "
+					   "specified\n", pcpu_chosen_alloc);
+			if (ret < 0)
+				pr_warning("PERCPU: %s allocator failed (%zd), "
+					   "falling back to 4k\n",
+					   pcpu_chosen_alloc, ret);
+		}
+	} else {
+		ret = setup_pcpu_lpage(static_size, false);
+		if (ret < 0)
+			ret = setup_pcpu_embed(static_size, false);
+	}
 	if (ret < 0)
 		ret = setup_pcpu_4k(static_size);
 	if (ret < 0)
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 124d40c575d..77b9689f8ed 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -711,7 +711,6 @@ uv_activation_descriptor_init(int node, int pnode)
 	unsigned long pa;
 	unsigned long m;
 	unsigned long n;
-	unsigned long mmr_image;
 	struct bau_desc *adp;
 	struct bau_desc *ad2;
 
@@ -727,12 +726,8 @@ uv_activation_descriptor_init(int node, int pnode)
 	n = pa >> uv_nshift;
 	m = pa & uv_mmask;
 
-	mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE);
-	if (mmr_image) {
-		uv_write_global_mmr64(pnode, (unsigned long)
-				      UVH_LB_BAU_SB_DESCRIPTOR_BASE,
-				      (n << UV_DESC_BASE_PNODE_SHIFT | m));
-	}
+	uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
+			      (n << UV_DESC_BASE_PNODE_SHIFT | m));
 
 	/*
 	 * initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each
@@ -749,6 +744,7 @@ uv_activation_descriptor_init(int node, int pnode)
 		 * note that base_dest_nodeid is actually a nasid.
 		 */
 		ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1;
+		ad2->header.dest_subnodeid = 0x10; /* the LB */
 		ad2->header.command = UV_NET_ENDPOINT_INTD;
 		ad2->header.int_both = 1;
 		/*
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index a0f48f5671c..5204332f475 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -346,6 +346,9 @@ io_check_error(unsigned char reason, struct pt_regs *regs)
 	printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
 	show_registers(regs);
 
+	if (panic_on_io_nmi)
+		panic("NMI IOCK error: Not continuing");
+
 	/* Re-enable the IOCK line, wait for a few seconds */
 	reason = (reason & 0xf) | 8;
 	outb(reason, 0x61);
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 6e1a368d21d..71f4368b357 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -275,15 +275,20 @@ static unsigned long pit_calibrate_tsc(u32 latch, unsigned long ms, int loopmin)
  * use the TSC value at the transitions to calculate a pretty
  * good value for the TSC frequencty.
  */
+static inline int pit_verify_msb(unsigned char val)
+{
+	/* Ignore LSB */
+	inb(0x42);
+	return inb(0x42) == val;
+}
+
 static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap)
 {
 	int count;
 	u64 tsc = 0;
 
 	for (count = 0; count < 50000; count++) {
-		/* Ignore LSB */
-		inb(0x42);
-		if (inb(0x42) != val)
+		if (!pit_verify_msb(val))
 			break;
 		tsc = get_cycles();
 	}
@@ -336,8 +341,7 @@ static unsigned long quick_pit_calibrate(void)
 	 * to do that is to just read back the 16-bit counter
 	 * once from the PIT.
 	 */
-	inb(0x42);
-	inb(0x42);
+	pit_verify_msb(0);
 
 	if (pit_expect_msb(0xff, &tsc, &d1)) {
 		for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) {
@@ -348,8 +352,19 @@ static unsigned long quick_pit_calibrate(void)
 			 * Iterate until the error is less than 500 ppm
 			 */
 			delta -= tsc;
-			if (d1+d2 < delta >> 11)
-				goto success;
+			if (d1+d2 >= delta >> 11)
+				continue;
+
+			/*
+			 * Check the PIT one more time to verify that
+			 * all TSC reads were stable wrt the PIT.
+			 *
+			 * This also guarantees serialization of the
+			 * last cycle read ('d2') in pit_expect_msb.
+			 */
+			if (!pit_verify_msb(0xfe - i))
+				break;
+			goto success;
 		}
 	}
 	printk("Fast TSC calibration failed\n");
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index b263423fbe2..95a7289e4b0 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -441,7 +441,7 @@ vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip,
 	ap.ds = __USER_DS;
 	ap.es = __USER_DS;
 	ap.fs = __KERNEL_PERCPU;
-	ap.gs = 0;
+	ap.gs = __KERNEL_STACK_CANARY;
 
 	ap.eflags = 0;
 
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 367e8788204..9fc178255c0 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -46,11 +46,10 @@ PHDRS {
 	data PT_LOAD FLAGS(7);          /* RWE */
 #ifdef CONFIG_X86_64
 	user PT_LOAD FLAGS(7);          /* RWE */
-	data.init PT_LOAD FLAGS(7);     /* RWE */
 #ifdef CONFIG_SMP
 	percpu PT_LOAD FLAGS(7);        /* RWE */
 #endif
-	data.init2 PT_LOAD FLAGS(7);    /* RWE */
+	init PT_LOAD FLAGS(7);          /* RWE */
 #endif
 	note PT_NOTE FLAGS(0);          /* ___ */
 }
@@ -103,72 +102,43 @@ SECTIONS
 		__stop___ex_table = .;
 	} :text = 0x9090
 
-	RODATA
+	RO_DATA(PAGE_SIZE)
 
 	/* Data */
-	. = ALIGN(PAGE_SIZE);
 	.data : AT(ADDR(.data) - LOAD_OFFSET) {
 		/* Start of data section */
 		_sdata = .;
-		DATA_DATA
-		CONSTRUCTORS
 
-#ifdef CONFIG_X86_64
-		/* End of data section */
-		_edata = .;
-#endif
-	} :data
+		/* init_task */
+		INIT_TASK_DATA(THREAD_SIZE)
 
 #ifdef CONFIG_X86_32
-	/* 32 bit has nosave before _edata */
-	. = ALIGN(PAGE_SIZE);
-	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
-	}
+		/* 32 bit has nosave before _edata */
+		NOSAVE_DATA
 #endif
 
-	. = ALIGN(PAGE_SIZE);
-	.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
-		*(.data.page_aligned)
+		PAGE_ALIGNED_DATA(PAGE_SIZE)
 		*(.data.idt)
-	}
 
-#ifdef CONFIG_X86_32
-	. = ALIGN(32);
-#else
-	. = ALIGN(PAGE_SIZE);
-	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-#endif
-	.data.cacheline_aligned :
-		AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
-		*(.data.cacheline_aligned)
-	}
+		CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES)
 
-	/* rarely changed data like cpu maps */
-#ifdef CONFIG_X86_32
-	. = ALIGN(32);
-#else
-	. = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
-#endif
-	.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
-		*(.data.read_mostly)
+		DATA_DATA
+		CONSTRUCTORS
+
+		/* rarely changed data like cpu maps */
+		READ_MOSTLY_DATA(CONFIG_X86_INTERNODE_CACHE_BYTES)
 
-#ifdef CONFIG_X86_32
 		/* End of data section */
 		_edata = .;
-#endif
-	}
+	} :data
 
 #ifdef CONFIG_X86_64
 
 #define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \
-                            SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \
-                            SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data) + SIZEOF(.data) + \
+                            PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
+#define VSYSCALL_VIRT_ADDR ((ADDR(.data) + SIZEOF(.data) + \
+                            PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
 
 #define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
 #define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
@@ -234,35 +204,29 @@ SECTIONS
 
 #endif /* CONFIG_X86_64 */
 
-	/* init_task */
-	. = ALIGN(THREAD_SIZE);
-	.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-		*(.data.init_task)
+	/* Init code and data - will be freed after init */
+	. = ALIGN(PAGE_SIZE);
+	.init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
+		__init_begin = .; /* paired with __init_end */
 	}
-#ifdef CONFIG_X86_64
-	 :data.init
-#endif
 
+#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
 	/*
-	 * smp_locks might be freed after init
-	 * start/end must be page aligned
+	 * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
+	 * output PHDR, so the next output section - .init.text - should
+	 * start another segment - init.
 	 */
-	. = ALIGN(PAGE_SIZE);
-	.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
-		__smp_locks = .;
-		*(.smp_locks)
-		__smp_locks_end = .;
-		. = ALIGN(PAGE_SIZE);
-	}
+	PERCPU_VADDR(0, :percpu)
+#endif
 
-	/* Init code and data - will be freed after init */
-	. = ALIGN(PAGE_SIZE);
 	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-		__init_begin = .; /* paired with __init_end */
 		_sinittext = .;
 		INIT_TEXT
 		_einittext = .;
 	}
+#ifdef CONFIG_X86_64
+	:init
+#endif
 
 	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
 		INIT_DATA
@@ -333,17 +297,7 @@ SECTIONS
 	}
 #endif
 
-#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
-	/*
-	 * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
-	 * output PHDR, so the next output section - __data_nosave - should
-	 * start another section data.init2.  Also, pda should be at the head of
-	 * percpu area.  Preallocate it and define the percpu offset symbol
-	 * so that it can be accessed as a percpu variable.
-	 */
-	. = ALIGN(PAGE_SIZE);
-	PERCPU_VADDR(0, :percpu)
-#else
+#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
 	PERCPU(PAGE_SIZE)
 #endif
 
@@ -354,15 +308,22 @@ SECTIONS
 		__init_end = .;
 	}
 
+	/*
+	 * smp_locks might be freed after init
+	 * start/end must be page aligned
+	 */
+	. = ALIGN(PAGE_SIZE);
+	.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+		__smp_locks = .;
+		*(.smp_locks)
+		__smp_locks_end = .;
+		. = ALIGN(PAGE_SIZE);
+	}
+
 #ifdef CONFIG_X86_64
 	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
-		. = ALIGN(PAGE_SIZE);
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
-	} :data.init2
-	/* use another section data.init2, see PERCPU_VADDR() above */
+		NOSAVE_DATA
+	}
 #endif
 
 	/* BSS */
@@ -400,8 +361,8 @@ SECTIONS
 
 
 #ifdef CONFIG_X86_32
-ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
-        "kernel image bigger than KERNEL_IMAGE_SIZE")
+. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
+	   "kernel image bigger than KERNEL_IMAGE_SIZE");
 #else
 /*
  * Per-cpu symbols which need to be offset from __per_cpu_load
@@ -414,12 +375,12 @@ INIT_PER_CPU(irq_stack_union);
 /*
  * Build-time check on the image size:
  */
-ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
-	"kernel image bigger than KERNEL_IMAGE_SIZE")
+. = ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
+	   "kernel image bigger than KERNEL_IMAGE_SIZE");
 
 #ifdef CONFIG_SMP
-ASSERT((per_cpu__irq_stack_union == 0),
-        "irq_stack_union is not at start of per-cpu area");
+. = ASSERT((per_cpu__irq_stack_union == 0),
+           "irq_stack_union is not at start of per-cpu area");
 #endif
 
 #endif /* CONFIG_X86_32 */
@@ -427,7 +388,7 @@ ASSERT((per_cpu__irq_stack_union == 0),
 #ifdef CONFIG_KEXEC
 #include <asm/kexec.h>
 
-ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
-       "kexec control code size is too big")
+. = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+           "kexec control code size is too big");
 #endif
 
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 4d6f0d293ee..21f68e00524 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -104,6 +104,9 @@ static s64 __kpit_elapsed(struct kvm *kvm)
 	ktime_t remaining;
 	struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state;
 
+	if (!ps->pit_timer.period)
+		return 0;
+
 	/*
 	 * The Counter does not stop when it reaches zero. In
 	 * Modes 0, 1, 4, and 5 the Counter ``wraps around'' to
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 5c3d6e81a7d..0ef5bb2b404 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -489,16 +489,20 @@ static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int lpage)
  *
  * If rmapp bit zero is one, (then rmap & ~1) points to a struct kvm_rmap_desc
  * containing more mappings.
+ *
+ * Returns the number of rmap entries before the spte was added or zero if
+ * the spte was not added.
+ *
  */
-static void rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
+static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
 {
 	struct kvm_mmu_page *sp;
 	struct kvm_rmap_desc *desc;
 	unsigned long *rmapp;
-	int i;
+	int i, count = 0;
 
 	if (!is_rmap_pte(*spte))
-		return;
+		return count;
 	gfn = unalias_gfn(vcpu->kvm, gfn);
 	sp = page_header(__pa(spte));
 	sp->gfns[spte - sp->spt] = gfn;
@@ -515,8 +519,10 @@ static void rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
 	} else {
 		rmap_printk("rmap_add: %p %llx many->many\n", spte, *spte);
 		desc = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
-		while (desc->shadow_ptes[RMAP_EXT-1] && desc->more)
+		while (desc->shadow_ptes[RMAP_EXT-1] && desc->more) {
 			desc = desc->more;
+			count += RMAP_EXT;
+		}
 		if (desc->shadow_ptes[RMAP_EXT-1]) {
 			desc->more = mmu_alloc_rmap_desc(vcpu);
 			desc = desc->more;
@@ -525,6 +531,7 @@ static void rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
 			;
 		desc->shadow_ptes[i] = spte;
 	}
+	return count;
 }
 
 static void rmap_desc_remove_entry(unsigned long *rmapp,
@@ -754,6 +761,19 @@ static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp)
 	return young;
 }
 
+#define RMAP_RECYCLE_THRESHOLD 1000
+
+static void rmap_recycle(struct kvm_vcpu *vcpu, gfn_t gfn, int lpage)
+{
+	unsigned long *rmapp;
+
+	gfn = unalias_gfn(vcpu->kvm, gfn);
+	rmapp = gfn_to_rmap(vcpu->kvm, gfn, lpage);
+
+	kvm_unmap_rmapp(vcpu->kvm, rmapp);
+	kvm_flush_remote_tlbs(vcpu->kvm);
+}
+
 int kvm_age_hva(struct kvm *kvm, unsigned long hva)
 {
 	return kvm_handle_hva(kvm, hva, kvm_age_rmapp);
@@ -1407,24 +1427,25 @@ static int kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
  */
 void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages)
 {
+	int used_pages;
+
+	used_pages = kvm->arch.n_alloc_mmu_pages - kvm->arch.n_free_mmu_pages;
+	used_pages = max(0, used_pages);
+
 	/*
 	 * If we set the number of mmu pages to be smaller be than the
 	 * number of actived pages , we must to free some mmu pages before we
 	 * change the value
 	 */
 
-	if ((kvm->arch.n_alloc_mmu_pages - kvm->arch.n_free_mmu_pages) >
-	    kvm_nr_mmu_pages) {
-		int n_used_mmu_pages = kvm->arch.n_alloc_mmu_pages
-				       - kvm->arch.n_free_mmu_pages;
-
-		while (n_used_mmu_pages > kvm_nr_mmu_pages) {
+	if (used_pages > kvm_nr_mmu_pages) {
+		while (used_pages > kvm_nr_mmu_pages) {
 			struct kvm_mmu_page *page;
 
 			page = container_of(kvm->arch.active_mmu_pages.prev,
 					    struct kvm_mmu_page, link);
 			kvm_mmu_zap_page(kvm, page);
-			n_used_mmu_pages--;
+			used_pages--;
 		}
 		kvm->arch.n_free_mmu_pages = 0;
 	}
@@ -1740,6 +1761,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 {
 	int was_rmapped = 0;
 	int was_writeble = is_writeble_pte(*shadow_pte);
+	int rmap_count;
 
 	pgprintk("%s: spte %llx access %x write_fault %d"
 		 " user_fault %d gfn %lx\n",
@@ -1781,9 +1803,11 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 
 	page_header_update_slot(vcpu->kvm, shadow_pte, gfn);
 	if (!was_rmapped) {
-		rmap_add(vcpu, shadow_pte, gfn, largepage);
+		rmap_count = rmap_add(vcpu, shadow_pte, gfn, largepage);
 		if (!is_rmap_pte(*shadow_pte))
 			kvm_release_pfn_clean(pfn);
+		if (rmap_count > RMAP_RECYCLE_THRESHOLD)
+			rmap_recycle(vcpu, gfn, largepage);
 	} else {
 		if (was_writeble)
 			kvm_release_pfn_dirty(pfn);
@@ -2157,7 +2181,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
 		else
 			/* 32 bits PSE 4MB page */
 			context->rsvd_bits_mask[1][1] = rsvd_bits(13, 21);
-		context->rsvd_bits_mask[1][0] = ~0ull;
+		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
 		break;
 	case PT32E_ROOT_LEVEL:
 		context->rsvd_bits_mask[0][2] =
@@ -2170,7 +2194,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
 		context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
 			rsvd_bits(maxphyaddr, 62) |
 			rsvd_bits(13, 20);		/* large page */
-		context->rsvd_bits_mask[1][0] = ~0ull;
+		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
 		break;
 	case PT64_ROOT_LEVEL:
 		context->rsvd_bits_mask[0][3] = exb_bit_rsvd |
@@ -2186,7 +2210,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
 		context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
 			rsvd_bits(maxphyaddr, 51) |
 			rsvd_bits(13, 20);		/* large page */
-		context->rsvd_bits_mask[1][0] = ~0ull;
+		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
 		break;
 	}
 }
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 258e4591e1c..67785f63539 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -281,7 +281,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 {
 	unsigned access = gw->pt_access;
 	struct kvm_mmu_page *shadow_page;
-	u64 spte, *sptep;
+	u64 spte, *sptep = NULL;
 	int direct;
 	gfn_t table_gfn;
 	int r;
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 71510e07e69..b1f658ad2f0 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -711,6 +711,7 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		svm->vmcb->control.tsc_offset += delta;
 		vcpu->cpu = cpu;
 		kvm_migrate_timers(vcpu);
+		svm->asid_generation = 0;
 	}
 
 	for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++)
@@ -1031,7 +1032,6 @@ static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *svm_data)
 		svm->vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ALL_ASID;
 	}
 
-	svm->vcpu.cpu = svm_data->cpu;
 	svm->asid_generation = svm_data->asid_generation;
 	svm->vmcb->control.asid = svm_data->next_asid++;
 }
@@ -2300,8 +2300,8 @@ static void pre_svm_run(struct vcpu_svm *svm)
 	struct svm_cpu_data *svm_data = per_cpu(svm_data, cpu);
 
 	svm->vmcb->control.tlb_ctl = TLB_CONTROL_DO_NOTHING;
-	if (svm->vcpu.cpu != cpu ||
-	    svm->asid_generation != svm_data->asid_generation)
+	/* FIXME: handle wraparound of asid_generation */
+	if (svm->asid_generation != svm_data->asid_generation)
 		new_asid(svm, svm_data);
 }
 
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index e770bf349ec..29f912927a5 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3012,6 +3012,12 @@ static int handle_vmcall(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static int handle_vmx_insn(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+	kvm_queue_exception(vcpu, UD_VECTOR);
+	return 1;
+}
+
 static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
@@ -3151,8 +3157,8 @@ static void handle_invalid_guest_state(struct kvm_vcpu *vcpu,
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	enum emulation_result err = EMULATE_DONE;
 
-	preempt_enable();
 	local_irq_enable();
+	preempt_enable();
 
 	while (!guest_state_valid(vcpu)) {
 		err = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
@@ -3162,7 +3168,7 @@ static void handle_invalid_guest_state(struct kvm_vcpu *vcpu,
 
 		if (err != EMULATE_DONE) {
 			kvm_report_emulation_failure(vcpu, "emulation failure");
-			return;
+			break;
 		}
 
 		if (signal_pending(current))
@@ -3171,8 +3177,8 @@ static void handle_invalid_guest_state(struct kvm_vcpu *vcpu,
 			schedule();
 	}
 
-	local_irq_disable();
 	preempt_disable();
+	local_irq_disable();
 
 	vmx->invalid_state_emulation_result = err;
 }
@@ -3198,6 +3204,15 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
 	[EXIT_REASON_HLT]                     = handle_halt,
 	[EXIT_REASON_INVLPG]		      = handle_invlpg,
 	[EXIT_REASON_VMCALL]                  = handle_vmcall,
+	[EXIT_REASON_VMCLEAR]	              = handle_vmx_insn,
+	[EXIT_REASON_VMLAUNCH]                = handle_vmx_insn,
+	[EXIT_REASON_VMPTRLD]                 = handle_vmx_insn,
+	[EXIT_REASON_VMPTRST]                 = handle_vmx_insn,
+	[EXIT_REASON_VMREAD]                  = handle_vmx_insn,
+	[EXIT_REASON_VMRESUME]                = handle_vmx_insn,
+	[EXIT_REASON_VMWRITE]                 = handle_vmx_insn,
+	[EXIT_REASON_VMOFF]                   = handle_vmx_insn,
+	[EXIT_REASON_VMON]                    = handle_vmx_insn,
 	[EXIT_REASON_TPR_BELOW_THRESHOLD]     = handle_tpr_below_threshold,
 	[EXIT_REASON_APIC_ACCESS]             = handle_apic_access,
 	[EXIT_REASON_WBINVD]                  = handle_wbinvd,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 249540f9851..3d452901182 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -704,11 +704,48 @@ static bool msr_mtrr_valid(unsigned msr)
 	return false;
 }
 
+static bool valid_pat_type(unsigned t)
+{
+	return t < 8 && (1 << t) & 0xf3; /* 0, 1, 4, 5, 6, 7 */
+}
+
+static bool valid_mtrr_type(unsigned t)
+{
+	return t < 8 && (1 << t) & 0x73; /* 0, 1, 4, 5, 6 */
+}
+
+static bool mtrr_valid(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+	int i;
+
+	if (!msr_mtrr_valid(msr))
+		return false;
+
+	if (msr == MSR_IA32_CR_PAT) {
+		for (i = 0; i < 8; i++)
+			if (!valid_pat_type((data >> (i * 8)) & 0xff))
+				return false;
+		return true;
+	} else if (msr == MSR_MTRRdefType) {
+		if (data & ~0xcff)
+			return false;
+		return valid_mtrr_type(data & 0xff);
+	} else if (msr >= MSR_MTRRfix64K_00000 && msr <= MSR_MTRRfix4K_F8000) {
+		for (i = 0; i < 8 ; i++)
+			if (!valid_mtrr_type((data >> (i * 8)) & 0xff))
+				return false;
+		return true;
+	}
+
+	/* variable MTRRs */
+	return valid_mtrr_type(data & 0xff);
+}
+
 static int set_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 {
 	u64 *p = (u64 *)&vcpu->arch.mtrr_state.fixed_ranges;
 
-	if (!msr_mtrr_valid(msr))
+	if (!mtrr_valid(vcpu, msr, data))
 		return 1;
 
 	if (msr == MSR_MTRRdefType) {
@@ -898,6 +935,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_VM_HSAVE_PA:
 	case MSR_P6_EVNTSEL0:
 	case MSR_P6_EVNTSEL1:
+	case MSR_K7_EVNTSEL0:
 		data = 0;
 		break;
 	case MSR_MTRRcap:
@@ -1078,14 +1116,13 @@ long kvm_arch_dev_ioctl(struct file *filp,
 		if (copy_to_user(user_msr_list, &msr_list, sizeof msr_list))
 			goto out;
 		r = -E2BIG;
-		if (n < num_msrs_to_save)
+		if (n < msr_list.nmsrs)
 			goto out;
 		r = -EFAULT;
 		if (copy_to_user(user_msr_list->indices, &msrs_to_save,
 				 num_msrs_to_save * sizeof(u32)))
 			goto out;
-		if (copy_to_user(user_msr_list->indices
-				 + num_msrs_to_save * sizeof(u32),
+		if (copy_to_user(user_msr_list->indices + num_msrs_to_save,
 				 &emulated_msrs,
 				 ARRAY_SIZE(emulated_msrs) * sizeof(u32)))
 			goto out;
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index c1b6c232e02..616de4628d6 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1361,7 +1361,7 @@ static inline int writeback(struct x86_emulate_ctxt *ctxt,
 	return 0;
 }
 
-void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
+static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
 {
 	u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
 	/*
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 7bc65f0f62c..d677fa9ca65 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -22,7 +22,8 @@
  *
  * So how does the kernel know it's a Guest?  We'll see that later, but let's
  * just say that we end up here where we replace the native functions various
- * "paravirt" structures with our Guest versions, then boot like normal. :*/
+ * "paravirt" structures with our Guest versions, then boot like normal.
+:*/
 
 /*
  * Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation.
@@ -74,7 +75,8 @@
  *
  * The Guest in our tale is a simple creature: identical to the Host but
  * behaving in simplified but equivalent ways.  In particular, the Guest is the
- * same kernel as the Host (or at least, built from the same source code). :*/
+ * same kernel as the Host (or at least, built from the same source code).
+:*/
 
 struct lguest_data lguest_data = {
 	.hcall_status = { [0 ... LHCALL_RING_SIZE-1] = 0xFF },
@@ -85,7 +87,8 @@ struct lguest_data lguest_data = {
 	.syscall_vec = SYSCALL_VECTOR,
 };
 
-/*G:037 async_hcall() is pretty simple: I'm quite proud of it really.  We have a
+/*G:037
+ * async_hcall() is pretty simple: I'm quite proud of it really.  We have a
  * ring buffer of stored hypercalls which the Host will run though next time we
  * do a normal hypercall.  Each entry in the ring has 5 slots for the hypercall
  * arguments, and a "hcall_status" word which is 0 if the call is ready to go,
@@ -94,7 +97,8 @@ struct lguest_data lguest_data = {
  * If we come around to a slot which hasn't been finished, then the table is
  * full and we just make the hypercall directly.  This has the nice side
  * effect of causing the Host to run all the stored calls in the ring buffer
- * which empties it for next time! */
+ * which empties it for next time!
+ */
 static void async_hcall(unsigned long call, unsigned long arg1,
 			unsigned long arg2, unsigned long arg3,
 			unsigned long arg4)
@@ -103,9 +107,11 @@ static void async_hcall(unsigned long call, unsigned long arg1,
 	static unsigned int next_call;
 	unsigned long flags;
 
-	/* Disable interrupts if not already disabled: we don't want an
+	/*
+	 * Disable interrupts if not already disabled: we don't want an
 	 * interrupt handler making a hypercall while we're already doing
-	 * one! */
+	 * one!
+	 */
 	local_irq_save(flags);
 	if (lguest_data.hcall_status[next_call] != 0xFF) {
 		/* Table full, so do normal hcall which will flush table. */
@@ -125,8 +131,9 @@ static void async_hcall(unsigned long call, unsigned long arg1,
 	local_irq_restore(flags);
 }
 
-/*G:035 Notice the lazy_hcall() above, rather than hcall().  This is our first
- * real optimization trick!
+/*G:035
+ * Notice the lazy_hcall() above, rather than hcall().  This is our first real
+ * optimization trick!
  *
  * When lazy_mode is set, it means we're allowed to defer all hypercalls and do
  * them as a batch when lazy_mode is eventually turned off.  Because hypercalls
@@ -136,7 +143,8 @@ static void async_hcall(unsigned long call, unsigned long arg1,
  * lguest_leave_lazy_mode().
  *
  * So, when we're in lazy mode, we call async_hcall() to store the call for
- * future processing: */
+ * future processing:
+ */
 static void lazy_hcall1(unsigned long call,
 		       unsigned long arg1)
 {
@@ -146,6 +154,7 @@ static void lazy_hcall1(unsigned long call,
 		async_hcall(call, arg1, 0, 0, 0);
 }
 
+/* You can imagine what lazy_hcall2, 3 and 4 look like. :*/
 static void lazy_hcall2(unsigned long call,
 		       unsigned long arg1,
 		       unsigned long arg2)
@@ -181,8 +190,10 @@ static void lazy_hcall4(unsigned long call,
 }
 #endif
 
-/* When lazy mode is turned off reset the per-cpu lazy mode variable and then
- * issue the do-nothing hypercall to flush any stored calls. */
+/*G:036
+ * When lazy mode is turned off reset the per-cpu lazy mode variable and then
+ * issue the do-nothing hypercall to flush any stored calls.
+:*/
 static void lguest_leave_lazy_mmu_mode(void)
 {
 	kvm_hypercall0(LHCALL_FLUSH_ASYNC);
@@ -208,9 +219,11 @@ static void lguest_end_context_switch(struct task_struct *next)
  * check there before it tries to deliver an interrupt.
  */
 
-/* save_flags() is expected to return the processor state (ie. "flags").  The
+/*
+ * save_flags() is expected to return the processor state (ie. "flags").  The
  * flags word contains all kind of stuff, but in practice Linux only cares
- * about the interrupt flag.  Our "save_flags()" just returns that. */
+ * about the interrupt flag.  Our "save_flags()" just returns that.
+ */
 static unsigned long save_fl(void)
 {
 	return lguest_data.irq_enabled;
@@ -222,13 +235,15 @@ static void irq_disable(void)
 	lguest_data.irq_enabled = 0;
 }
 
-/* Let's pause a moment.  Remember how I said these are called so often?
+/*
+ * Let's pause a moment.  Remember how I said these are called so often?
  * Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to
  * break some rules.  In particular, these functions are assumed to save their
  * own registers if they need to: normal C functions assume they can trash the
  * eax register.  To use normal C functions, we use
  * PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the
- * C function, then restores it. */
+ * C function, then restores it.
+ */
 PV_CALLEE_SAVE_REGS_THUNK(save_fl);
 PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
 /*:*/
@@ -237,18 +252,18 @@ PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
 extern void lg_irq_enable(void);
 extern void lg_restore_fl(unsigned long flags);
 
-/*M:003 Note that we don't check for outstanding interrupts when we re-enable
- * them (or when we unmask an interrupt).  This seems to work for the moment,
- * since interrupts are rare and we'll just get the interrupt on the next timer
- * tick, but now we can run with CONFIG_NO_HZ, we should revisit this.  One way
- * would be to put the "irq_enabled" field in a page by itself, and have the
- * Host write-protect it when an interrupt comes in when irqs are disabled.
- * There will then be a page fault as soon as interrupts are re-enabled.
+/*M:003
+ * We could be more efficient in our checking of outstanding interrupts, rather
+ * than using a branch.  One way would be to put the "irq_enabled" field in a
+ * page by itself, and have the Host write-protect it when an interrupt comes
+ * in when irqs are disabled.  There will then be a page fault as soon as
+ * interrupts are re-enabled.
  *
  * A better method is to implement soft interrupt disable generally for x86:
  * instead of disabling interrupts, we set a flag.  If an interrupt does come
  * in, we then disable them for real.  This is uncommon, so we could simply use
- * a hypercall for interrupt control and not worry about efficiency. :*/
+ * a hypercall for interrupt control and not worry about efficiency.
+:*/
 
 /*G:034
  * The Interrupt Descriptor Table (IDT).
@@ -261,10 +276,12 @@ extern void lg_restore_fl(unsigned long flags);
 static void lguest_write_idt_entry(gate_desc *dt,
 				   int entrynum, const gate_desc *g)
 {
-	/* The gate_desc structure is 8 bytes long: we hand it to the Host in
+	/*
+	 * The gate_desc structure is 8 bytes long: we hand it to the Host in
 	 * two 32-bit chunks.  The whole 32-bit kernel used to hand descriptors
 	 * around like this; typesafety wasn't a big concern in Linux's early
-	 * years. */
+	 * years.
+	 */
 	u32 *desc = (u32 *)g;
 	/* Keep the local copy up to date. */
 	native_write_idt_entry(dt, entrynum, g);
@@ -272,9 +289,11 @@ static void lguest_write_idt_entry(gate_desc *dt,
 	kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1]);
 }
 
-/* Changing to a different IDT is very rare: we keep the IDT up-to-date every
+/*
+ * Changing to a different IDT is very rare: we keep the IDT up-to-date every
  * time it is written, so we can simply loop through all entries and tell the
- * Host about them. */
+ * Host about them.
+ */
 static void lguest_load_idt(const struct desc_ptr *desc)
 {
 	unsigned int i;
@@ -305,9 +324,11 @@ static void lguest_load_gdt(const struct desc_ptr *desc)
 		kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b);
 }
 
-/* For a single GDT entry which changes, we do the lazy thing: alter our GDT,
+/*
+ * For a single GDT entry which changes, we do the lazy thing: alter our GDT,
  * then tell the Host to reload the entire thing.  This operation is so rare
- * that this naive implementation is reasonable. */
+ * that this naive implementation is reasonable.
+ */
 static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
 				   const void *desc, int type)
 {
@@ -317,29 +338,36 @@ static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
 		       dt[entrynum].a, dt[entrynum].b);
 }
 
-/* OK, I lied.  There are three "thread local storage" GDT entries which change
+/*
+ * OK, I lied.  There are three "thread local storage" GDT entries which change
  * on every context switch (these three entries are how glibc implements
- * __thread variables).  So we have a hypercall specifically for this case. */
+ * __thread variables).  So we have a hypercall specifically for this case.
+ */
 static void lguest_load_tls(struct thread_struct *t, unsigned int cpu)
 {
-	/* There's one problem which normal hardware doesn't have: the Host
+	/*
+	 * There's one problem which normal hardware doesn't have: the Host
 	 * can't handle us removing entries we're currently using.  So we clear
-	 * the GS register here: if it's needed it'll be reloaded anyway. */
+	 * the GS register here: if it's needed it'll be reloaded anyway.
+	 */
 	lazy_load_gs(0);
 	lazy_hcall2(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu);
 }
 
-/*G:038 That's enough excitement for now, back to ploughing through each of
- * the different pv_ops structures (we're about 1/3 of the way through).
+/*G:038
+ * That's enough excitement for now, back to ploughing through each of the
+ * different pv_ops structures (we're about 1/3 of the way through).
  *
  * This is the Local Descriptor Table, another weird Intel thingy.  Linux only
  * uses this for some strange applications like Wine.  We don't do anything
- * here, so they'll get an informative and friendly Segmentation Fault. */
+ * here, so they'll get an informative and friendly Segmentation Fault.
+ */
 static void lguest_set_ldt(const void *addr, unsigned entries)
 {
 }
 
-/* This loads a GDT entry into the "Task Register": that entry points to a
+/*
+ * This loads a GDT entry into the "Task Register": that entry points to a
  * structure called the Task State Segment.  Some comments scattered though the
  * kernel code indicate that this used for task switching in ages past, along
  * with blood sacrifice and astrology.
@@ -347,19 +375,21 @@ static void lguest_set_ldt(const void *addr, unsigned entries)
  * Now there's nothing interesting in here that we don't get told elsewhere.
  * But the native version uses the "ltr" instruction, which makes the Host
  * complain to the Guest about a Segmentation Fault and it'll oops.  So we
- * override the native version with a do-nothing version. */
+ * override the native version with a do-nothing version.
+ */
 static void lguest_load_tr_desc(void)
 {
 }
 
-/* The "cpuid" instruction is a way of querying both the CPU identity
+/*
+ * The "cpuid" instruction is a way of querying both the CPU identity
  * (manufacturer, model, etc) and its features.  It was introduced before the
  * Pentium in 1993 and keeps getting extended by both Intel, AMD and others.
  * As you might imagine, after a decade and a half this treatment, it is now a
  * giant ball of hair.  Its entry in the current Intel manual runs to 28 pages.
  *
  * This instruction even it has its own Wikipedia entry.  The Wikipedia entry
- * has been translated into 4 languages.  I am not making this up!
+ * has been translated into 5 languages.  I am not making this up!
  *
  * We could get funky here and identify ourselves as "GenuineLguest", but
  * instead we just use the real "cpuid" instruction.  Then I pretty much turned
@@ -371,7 +401,8 @@ static void lguest_load_tr_desc(void)
  * Replacing the cpuid so we can turn features off is great for the kernel, but
  * anyone (including userspace) can just use the raw "cpuid" instruction and
  * the Host won't even notice since it isn't privileged.  So we try not to get
- * too worked up about it. */
+ * too worked up about it.
+ */
 static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 			 unsigned int *cx, unsigned int *dx)
 {
@@ -379,38 +410,63 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 
 	native_cpuid(ax, bx, cx, dx);
 	switch (function) {
-	case 1:	/* Basic feature request. */
-		/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
+	/*
+	 * CPUID 0 gives the highest legal CPUID number (and the ID string).
+	 * We futureproof our code a little by sticking to known CPUID values.
+	 */
+	case 0:
+		if (*ax > 5)
+			*ax = 5;
+		break;
+
+	/*
+	 * CPUID 1 is a basic feature request.
+	 *
+	 * CX: we only allow kernel to see SSE3, CMPXCHG16B and SSSE3
+	 * DX: SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU and PAE.
+	 */
+	case 1:
 		*cx &= 0x00002201;
-		/* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */
 		*dx &= 0x07808151;
-		/* The Host can do a nice optimization if it knows that the
+		/*
+		 * The Host can do a nice optimization if it knows that the
 		 * kernel mappings (addresses above 0xC0000000 or whatever
 		 * PAGE_OFFSET is set to) haven't changed.  But Linux calls
 		 * flush_tlb_user() for both user and kernel mappings unless
-		 * the Page Global Enable (PGE) feature bit is set. */
+		 * the Page Global Enable (PGE) feature bit is set.
+		 */
 		*dx |= 0x00002000;
-		/* We also lie, and say we're family id 5.  6 or greater
+		/*
+		 * We also lie, and say we're family id 5.  6 or greater
 		 * leads to a rdmsr in early_init_intel which we can't handle.
-		 * Family ID is returned as bits 8-12 in ax. */
+		 * Family ID is returned as bits 8-12 in ax.
+		 */
 		*ax &= 0xFFFFF0FF;
 		*ax |= 0x00000500;
 		break;
+	/*
+	 * 0x80000000 returns the highest Extended Function, so we futureproof
+	 * like we do above by limiting it to known fields.
+	 */
 	case 0x80000000:
-		/* Futureproof this a little: if they ask how much extended
-		 * processor information there is, limit it to known fields. */
 		if (*ax > 0x80000008)
 			*ax = 0x80000008;
 		break;
+
+	/*
+	 * PAE systems can mark pages as non-executable.  Linux calls this the
+	 * NX bit.  Intel calls it XD (eXecute Disable), AMD EVP (Enhanced
+	 * Virus Protection).  We just switch turn if off here, since we don't
+	 * support it.
+	 */
 	case 0x80000001:
-		/* Here we should fix nx cap depending on host. */
-		/* For this version of PAE, we just clear NX bit. */
 		*dx &= ~(1 << 20);
 		break;
 	}
 }
 
-/* Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
+/*
+ * Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
  * I assume there's a cr1, but it hasn't bothered us yet, so we'll not bother
  * it.  The Host needs to know when the Guest wants to change them, so we have
  * a whole series of functions like read_cr0() and write_cr0().
@@ -425,7 +481,8 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
  * name like "FPUTRAP bit" be a little less cryptic?
  *
  * We store cr0 locally because the Host never changes it.  The Guest sometimes
- * wants to read it and we'd prefer not to bother the Host unnecessarily. */
+ * wants to read it and we'd prefer not to bother the Host unnecessarily.
+ */
 static unsigned long current_cr0;
 static void lguest_write_cr0(unsigned long val)
 {
@@ -438,18 +495,22 @@ static unsigned long lguest_read_cr0(void)
 	return current_cr0;
 }
 
-/* Intel provided a special instruction to clear the TS bit for people too cool
+/*
+ * Intel provided a special instruction to clear the TS bit for people too cool
  * to use write_cr0() to do it.  This "clts" instruction is faster, because all
- * the vowels have been optimized out. */
+ * the vowels have been optimized out.
+ */
 static void lguest_clts(void)
 {
 	lazy_hcall1(LHCALL_TS, 0);
 	current_cr0 &= ~X86_CR0_TS;
 }
 
-/* cr2 is the virtual address of the last page fault, which the Guest only ever
+/*
+ * cr2 is the virtual address of the last page fault, which the Guest only ever
  * reads.  The Host kindly writes this into our "struct lguest_data", so we
- * just read it out of there. */
+ * just read it out of there.
+ */
 static unsigned long lguest_read_cr2(void)
 {
 	return lguest_data.cr2;
@@ -458,10 +519,12 @@ static unsigned long lguest_read_cr2(void)
 /* See lguest_set_pte() below. */
 static bool cr3_changed = false;
 
-/* cr3 is the current toplevel pagetable page: the principle is the same as
+/*
+ * cr3 is the current toplevel pagetable page: the principle is the same as
  * cr0.  Keep a local copy, and tell the Host when it changes.  The only
  * difference is that our local copy is in lguest_data because the Host needs
- * to set it upon our initial hypercall. */
+ * to set it upon our initial hypercall.
+ */
 static void lguest_write_cr3(unsigned long cr3)
 {
 	lguest_data.pgdir = cr3;
@@ -506,7 +569,7 @@ static void lguest_write_cr4(unsigned long val)
  * cr3 ---> +---------+
  *	    |  	   --------->+---------+
  *	    |	      |	     | PADDR1  |
- *	  Top-level   |	     | PADDR2  |
+ *	  Mid-level   |	     | PADDR2  |
  *	  (PMD) page  |	     | 	       |
  *	    |	      |	   Lower-level |
  *	    |	      |	   (PTE) page  |
@@ -526,21 +589,62 @@ static void lguest_write_cr4(unsigned long val)
  *    Index into top     Index into second      Offset within page
  *  page directory page    pagetable page
  *
- * The kernel spends a lot of time changing both the top-level page directory
- * and lower-level pagetable pages.  The Guest doesn't know physical addresses,
- * so while it maintains these page tables exactly like normal, it also needs
- * to keep the Host informed whenever it makes a change: the Host will create
- * the real page tables based on the Guests'.
+ * Now, unfortunately, this isn't the whole story: Intel added Physical Address
+ * Extension (PAE) to allow 32 bit systems to use 64GB of memory (ie. 36 bits).
+ * These are held in 64-bit page table entries, so we can now only fit 512
+ * entries in a page, and the neat three-level tree breaks down.
+ *
+ * The result is a four level page table:
+ *
+ * cr3 --> [ 4 Upper  ]
+ *	   [   Level  ]
+ *	   [  Entries ]
+ *	   [(PUD Page)]---> +---------+
+ *	 		    |  	   --------->+---------+
+ *	 		    |	      |	     | PADDR1  |
+ *	 		  Mid-level   |	     | PADDR2  |
+ *	 		  (PMD) page  |	     | 	       |
+ *	 		    |	      |	   Lower-level |
+ *	 		    |	      |	   (PTE) page  |
+ *	 		    |	      |	     |	       |
+ *	 		      ....    	     	 ....
+ *
+ *
+ * And the virtual address is decoded as:
+ *
+ *         1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ *      |<-2->|<--- 9 bits ---->|<---- 9 bits --->|<------ 12 bits ------>|
+ * Index into    Index into mid    Index into lower    Offset within page
+ * top entries   directory page     pagetable page
+ *
+ * It's too hard to switch between these two formats at runtime, so Linux only
+ * supports one or the other depending on whether CONFIG_X86_PAE is set.  Many
+ * distributions turn it on, and not just for people with silly amounts of
+ * memory: the larger PTE entries allow room for the NX bit, which lets the
+ * kernel disable execution of pages and increase security.
+ *
+ * This was a problem for lguest, which couldn't run on these distributions;
+ * then Matias Zabaljauregui figured it all out and implemented it, and only a
+ * handful of puppies were crushed in the process!
+ *
+ * Back to our point: the kernel spends a lot of time changing both the
+ * top-level page directory and lower-level pagetable pages.  The Guest doesn't
+ * know physical addresses, so while it maintains these page tables exactly
+ * like normal, it also needs to keep the Host informed whenever it makes a
+ * change: the Host will create the real page tables based on the Guests'.
  */
 
-/* The Guest calls this to set a second-level entry (pte), ie. to map a page
- * into a process' address space.  We set the entry then tell the Host the
- * toplevel and address this corresponds to.  The Guest uses one pagetable per
- * process, so we need to tell the Host which one we're changing (mm->pgd). */
+/*
+ * The Guest calls this after it has set a second-level entry (pte), ie. to map
+ * a page into a process' address space.  Wetell the Host the toplevel and
+ * address this corresponds to.  The Guest uses one pagetable per process, so
+ * we need to tell the Host which one we're changing (mm->pgd).
+ */
 static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
 			       pte_t *ptep)
 {
 #ifdef CONFIG_X86_PAE
+	/* PAE needs to hand a 64 bit page table entry, so it uses two args. */
 	lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr,
 		    ptep->pte_low, ptep->pte_high);
 #else
@@ -548,6 +652,7 @@ static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
 #endif
 }
 
+/* This is the "set and update" combo-meal-deal version. */
 static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pteval)
 {
@@ -555,10 +660,13 @@ static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
 	lguest_pte_update(mm, addr, ptep);
 }
 
-/* The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
+/*
+ * The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
  * to set a middle-level entry when PAE is activated.
+ *
  * Again, we set the entry then tell the Host which page we changed,
- * and the index of the entry we changed. */
+ * and the index of the entry we changed.
+ */
 #ifdef CONFIG_X86_PAE
 static void lguest_set_pud(pud_t *pudp, pud_t pudval)
 {
@@ -577,8 +685,7 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 }
 #else
 
-/* The Guest calls lguest_set_pmd to set a top-level entry when PAE is not
- * activated. */
+/* The Guest calls lguest_set_pmd to set a top-level entry when !PAE. */
 static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 {
 	native_set_pmd(pmdp, pmdval);
@@ -587,7 +694,8 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 }
 #endif
 
-/* There are a couple of legacy places where the kernel sets a PTE, but we
+/*
+ * There are a couple of legacy places where the kernel sets a PTE, but we
  * don't know the top level any more.  This is useless for us, since we don't
  * know which pagetable is changing or what address, so we just tell the Host
  * to forget all of them.  Fortunately, this is very rare.
@@ -595,7 +703,8 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
  * ... except in early boot when the kernel sets up the initial pagetables,
  * which makes booting astonishingly slow: 1.83 seconds!  So we don't even tell
  * the Host anything changed until we've done the first page table switch,
- * which brings boot back to 0.25 seconds. */
+ * which brings boot back to 0.25 seconds.
+ */
 static void lguest_set_pte(pte_t *ptep, pte_t pteval)
 {
 	native_set_pte(ptep, pteval);
@@ -604,6 +713,11 @@ static void lguest_set_pte(pte_t *ptep, pte_t pteval)
 }
 
 #ifdef CONFIG_X86_PAE
+/*
+ * With 64-bit PTE values, we need to be careful setting them: if we set 32
+ * bits at a time, the hardware could see a weird half-set entry.  These
+ * versions ensure we update all 64 bits at once.
+ */
 static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
 {
 	native_set_pte_atomic(ptep, pte);
@@ -611,19 +725,21 @@ static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
 		lazy_hcall1(LHCALL_FLUSH_TLB, 1);
 }
 
-void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+static void lguest_pte_clear(struct mm_struct *mm, unsigned long addr,
+			     pte_t *ptep)
 {
 	native_pte_clear(mm, addr, ptep);
 	lguest_pte_update(mm, addr, ptep);
 }
 
-void lguest_pmd_clear(pmd_t *pmdp)
+static void lguest_pmd_clear(pmd_t *pmdp)
 {
 	lguest_set_pmd(pmdp, __pmd(0));
 }
 #endif
 
-/* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
+/*
+ * Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
  * native page table operations.  On native hardware you can set a new page
  * table entry whenever you want, but if you want to remove one you have to do
  * a TLB flush (a TLB is a little cache of page table entries kept by the CPU).
@@ -632,24 +748,29 @@ void lguest_pmd_clear(pmd_t *pmdp)
  * called when a valid entry is written, not when it's removed (ie. marked not
  * present).  Instead, this is where we come when the Guest wants to remove a
  * page table entry: we tell the Host to set that entry to 0 (ie. the present
- * bit is zero). */
+ * bit is zero).
+ */
 static void lguest_flush_tlb_single(unsigned long addr)
 {
 	/* Simply set it to zero: if it was not, it will fault back in. */
 	lazy_hcall3(LHCALL_SET_PTE, lguest_data.pgdir, addr, 0);
 }
 
-/* This is what happens after the Guest has removed a large number of entries.
+/*
+ * This is what happens after the Guest has removed a large number of entries.
  * This tells the Host that any of the page table entries for userspace might
- * have changed, ie. virtual addresses below PAGE_OFFSET. */
+ * have changed, ie. virtual addresses below PAGE_OFFSET.
+ */
 static void lguest_flush_tlb_user(void)
 {
 	lazy_hcall1(LHCALL_FLUSH_TLB, 0);
 }
 
-/* This is called when the kernel page tables have changed.  That's not very
+/*
+ * This is called when the kernel page tables have changed.  That's not very
  * common (unless the Guest is using highmem, which makes the Guest extremely
- * slow), so it's worth separating this from the user flushing above. */
+ * slow), so it's worth separating this from the user flushing above.
+ */
 static void lguest_flush_tlb_kernel(void)
 {
 	lazy_hcall1(LHCALL_FLUSH_TLB, 1);
@@ -686,26 +807,38 @@ static struct irq_chip lguest_irq_controller = {
 	.unmask		= enable_lguest_irq,
 };
 
-/* This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
+/*
+ * This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
  * interrupt (except 128, which is used for system calls), and then tells the
  * Linux infrastructure that each interrupt is controlled by our level-based
- * lguest interrupt controller. */
+ * lguest interrupt controller.
+ */
 static void __init lguest_init_IRQ(void)
 {
 	unsigned int i;
 
 	for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
-		/* Some systems map "vectors" to interrupts weirdly.  Lguest has
-		 * a straightforward 1 to 1 mapping, so force that here. */
+		/* Some systems map "vectors" to interrupts weirdly.  Not us! */
 		__get_cpu_var(vector_irq)[i] = i - FIRST_EXTERNAL_VECTOR;
 		if (i != SYSCALL_VECTOR)
 			set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
 	}
-	/* This call is required to set up for 4k stacks, where we have
-	 * separate stacks for hard and soft interrupts. */
+
+	/*
+	 * This call is required to set up for 4k stacks, where we have
+	 * separate stacks for hard and soft interrupts.
+	 */
 	irq_ctx_init(smp_processor_id());
 }
 
+/*
+ * With CONFIG_SPARSE_IRQ, interrupt descriptors are allocated as-needed, so
+ * rather than set them in lguest_init_IRQ we are called here every time an
+ * lguest device needs an interrupt.
+ *
+ * FIXME: irq_to_desc_alloc_node() can fail due to lack of memory, we should
+ * pass that up!
+ */
 void lguest_setup_irq(unsigned int irq)
 {
 	irq_to_desc_alloc_node(irq, 0);
@@ -724,31 +857,39 @@ static unsigned long lguest_get_wallclock(void)
 	return lguest_data.time.tv_sec;
 }
 
-/* The TSC is an Intel thing called the Time Stamp Counter.  The Host tells us
+/*
+ * The TSC is an Intel thing called the Time Stamp Counter.  The Host tells us
  * what speed it runs at, or 0 if it's unusable as a reliable clock source.
  * This matches what we want here: if we return 0 from this function, the x86
- * TSC clock will give up and not register itself. */
+ * TSC clock will give up and not register itself.
+ */
 static unsigned long lguest_tsc_khz(void)
 {
 	return lguest_data.tsc_khz;
 }
 
-/* If we can't use the TSC, the kernel falls back to our lower-priority
- * "lguest_clock", where we read the time value given to us by the Host. */
+/*
+ * If we can't use the TSC, the kernel falls back to our lower-priority
+ * "lguest_clock", where we read the time value given to us by the Host.
+ */
 static cycle_t lguest_clock_read(struct clocksource *cs)
 {
 	unsigned long sec, nsec;
 
-	/* Since the time is in two parts (seconds and nanoseconds), we risk
+	/*
+	 * Since the time is in two parts (seconds and nanoseconds), we risk
 	 * reading it just as it's changing from 99 & 0.999999999 to 100 and 0,
 	 * and getting 99 and 0.  As Linux tends to come apart under the stress
-	 * of time travel, we must be careful: */
+	 * of time travel, we must be careful:
+	 */
 	do {
 		/* First we read the seconds part. */
 		sec = lguest_data.time.tv_sec;
-		/* This read memory barrier tells the compiler and the CPU that
+		/*
+		 * This read memory barrier tells the compiler and the CPU that
 		 * this can't be reordered: we have to complete the above
-		 * before going on. */
+		 * before going on.
+		 */
 		rmb();
 		/* Now we read the nanoseconds part. */
 		nsec = lguest_data.time.tv_nsec;
@@ -772,9 +913,11 @@ static struct clocksource lguest_clock = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-/* We also need a "struct clock_event_device": Linux asks us to set it to go
+/*
+ * We also need a "struct clock_event_device": Linux asks us to set it to go
  * off some time in the future.  Actually, James Morris figured all this out, I
- * just applied the patch. */
+ * just applied the patch.
+ */
 static int lguest_clockevent_set_next_event(unsigned long delta,
                                            struct clock_event_device *evt)
 {
@@ -824,8 +967,10 @@ static struct clock_event_device lguest_clockevent = {
 	.max_delta_ns           = LG_CLOCK_MAX_DELTA,
 };
 
-/* This is the Guest timer interrupt handler (hardware interrupt 0).  We just
- * call the clockevent infrastructure and it does whatever needs doing. */
+/*
+ * This is the Guest timer interrupt handler (hardware interrupt 0).  We just
+ * call the clockevent infrastructure and it does whatever needs doing.
+ */
 static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned long flags;
@@ -836,10 +981,12 @@ static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
 	local_irq_restore(flags);
 }
 
-/* At some point in the boot process, we get asked to set up our timing
+/*
+ * At some point in the boot process, we get asked to set up our timing
  * infrastructure.  The kernel doesn't expect timer interrupts before this, but
  * we cleverly initialized the "blocked_interrupts" field of "struct
- * lguest_data" so that timer interrupts were blocked until now. */
+ * lguest_data" so that timer interrupts were blocked until now.
+ */
 static void lguest_time_init(void)
 {
 	/* Set up the timer interrupt (0) to go to our simple timer routine */
@@ -863,14 +1010,16 @@ static void lguest_time_init(void)
  * to work.  They're pretty simple.
  */
 
-/* The Guest needs to tell the Host what stack it expects traps to use.  For
+/*
+ * The Guest needs to tell the Host what stack it expects traps to use.  For
  * native hardware, this is part of the Task State Segment mentioned above in
  * lguest_load_tr_desc(), but to help hypervisors there's this special call.
  *
  * We tell the Host the segment we want to use (__KERNEL_DS is the kernel data
  * segment), the privilege level (we're privilege level 1, the Host is 0 and
  * will not tolerate us trying to use that), the stack pointer, and the number
- * of pages in the stack. */
+ * of pages in the stack.
+ */
 static void lguest_load_sp0(struct tss_struct *tss,
 			    struct thread_struct *thread)
 {
@@ -884,7 +1033,8 @@ static void lguest_set_debugreg(int regno, unsigned long value)
 	/* FIXME: Implement */
 }
 
-/* There are times when the kernel wants to make sure that no memory writes are
+/*
+ * There are times when the kernel wants to make sure that no memory writes are
  * caught in the cache (that they've all reached real hardware devices).  This
  * doesn't matter for the Guest which has virtual hardware.
  *
@@ -898,11 +1048,13 @@ static void lguest_wbinvd(void)
 {
 }
 
-/* If the Guest expects to have an Advanced Programmable Interrupt Controller,
+/*
+ * If the Guest expects to have an Advanced Programmable Interrupt Controller,
  * we play dumb by ignoring writes and returning 0 for reads.  So it's no
  * longer Programmable nor Controlling anything, and I don't think 8 lines of
  * code qualifies for Advanced.  It will also never interrupt anything.  It
- * does, however, allow us to get through the Linux boot code. */
+ * does, however, allow us to get through the Linux boot code.
+ */
 #ifdef CONFIG_X86_LOCAL_APIC
 static void lguest_apic_write(u32 reg, u32 v)
 {
@@ -951,11 +1103,13 @@ static void lguest_safe_halt(void)
 	kvm_hypercall0(LHCALL_HALT);
 }
 
-/* The SHUTDOWN hypercall takes a string to describe what's happening, and
+/*
+ * The SHUTDOWN hypercall takes a string to describe what's happening, and
  * an argument which says whether this to restart (reboot) the Guest or not.
  *
  * Note that the Host always prefers that the Guest speak in physical addresses
- * rather than virtual addresses, so we use __pa() here. */
+ * rather than virtual addresses, so we use __pa() here.
+ */
 static void lguest_power_off(void)
 {
 	kvm_hypercall2(LHCALL_SHUTDOWN, __pa("Power down"),
@@ -986,8 +1140,10 @@ static __init char *lguest_memory_setup(void)
 	 * nice to move it back to lguest_init.  Patch welcome... */
 	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
 
-	/* The Linux bootloader header contains an "e820" memory map: the
-	 * Launcher populated the first entry with our memory limit. */
+	/*
+	 *The Linux bootloader header contains an "e820" memory map: the
+	 * Launcher populated the first entry with our memory limit.
+	 */
 	e820_add_region(boot_params.e820_map[0].addr,
 			  boot_params.e820_map[0].size,
 			  boot_params.e820_map[0].type);
@@ -996,16 +1152,17 @@ static __init char *lguest_memory_setup(void)
 	return "LGUEST";
 }
 
-/* We will eventually use the virtio console device to produce console output,
+/*
+ * We will eventually use the virtio console device to produce console output,
  * but before that is set up we use LHCALL_NOTIFY on normal memory to produce
- * console output. */
+ * console output.
+ */
 static __init int early_put_chars(u32 vtermno, const char *buf, int count)
 {
 	char scratch[17];
 	unsigned int len = count;
 
-	/* We use a nul-terminated string, so we have to make a copy.  Icky,
-	 * huh? */
+	/* We use a nul-terminated string, so we make a copy.  Icky, huh? */
 	if (len > sizeof(scratch) - 1)
 		len = sizeof(scratch) - 1;
 	scratch[len] = '\0';
@@ -1016,8 +1173,10 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
 	return len;
 }
 
-/* Rebooting also tells the Host we're finished, but the RESTART flag tells the
- * Launcher to reboot us. */
+/*
+ * Rebooting also tells the Host we're finished, but the RESTART flag tells the
+ * Launcher to reboot us.
+ */
 static void lguest_restart(char *reason)
 {
 	kvm_hypercall2(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART);
@@ -1044,7 +1203,8 @@ static void lguest_restart(char *reason)
  * fit comfortably.
  *
  * First we need assembly templates of each of the patchable Guest operations,
- * and these are in i386_head.S. */
+ * and these are in i386_head.S.
+ */
 
 /*G:060 We construct a table from the assembler templates: */
 static const struct lguest_insns
@@ -1055,9 +1215,11 @@ static const struct lguest_insns
 	[PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf },
 };
 
-/* Now our patch routine is fairly simple (based on the native one in
+/*
+ * Now our patch routine is fairly simple (based on the native one in
  * paravirt.c).  If we have a replacement, we copy it in and return how much of
- * the available space we used. */
+ * the available space we used.
+ */
 static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
 			     unsigned long addr, unsigned len)
 {
@@ -1069,8 +1231,7 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
 
 	insn_len = lguest_insns[type].end - lguest_insns[type].start;
 
-	/* Similarly if we can't fit replacement (shouldn't happen, but let's
-	 * be thorough). */
+	/* Similarly if it can't fit (doesn't happen, but let's be thorough). */
 	if (len < insn_len)
 		return paravirt_patch_default(type, clobber, ibuf, addr, len);
 
@@ -1079,22 +1240,28 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
 	return insn_len;
 }
 
-/*G:030 Once we get to lguest_init(), we know we're a Guest.  The various
+/*G:029
+ * Once we get to lguest_init(), we know we're a Guest.  The various
  * pv_ops structures in the kernel provide points for (almost) every routine we
- * have to override to avoid privileged instructions. */
+ * have to override to avoid privileged instructions.
+ */
 __init void lguest_init(void)
 {
-	/* We're under lguest, paravirt is enabled, and we're running at
-	 * privilege level 1, not 0 as normal. */
+	/* We're under lguest. */
 	pv_info.name = "lguest";
+	/* Paravirt is enabled. */
 	pv_info.paravirt_enabled = 1;
+	/* We're running at privilege level 1, not 0 as normal. */
 	pv_info.kernel_rpl = 1;
+	/* Everyone except Xen runs with this set. */
 	pv_info.shared_kernel_pmd = 1;
 
-	/* We set up all the lguest overrides for sensitive operations.  These
-	 * are detailed with the operations themselves. */
+	/*
+	 * We set up all the lguest overrides for sensitive operations.  These
+	 * are detailed with the operations themselves.
+	 */
 
-	/* interrupt-related operations */
+	/* Interrupt-related operations */
 	pv_irq_ops.init_IRQ = lguest_init_IRQ;
 	pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
 	pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl);
@@ -1102,11 +1269,11 @@ __init void lguest_init(void)
 	pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable);
 	pv_irq_ops.safe_halt = lguest_safe_halt;
 
-	/* init-time operations */
+	/* Setup operations */
 	pv_init_ops.memory_setup = lguest_memory_setup;
 	pv_init_ops.patch = lguest_patch;
 
-	/* Intercepts of various cpu instructions */
+	/* Intercepts of various CPU instructions */
 	pv_cpu_ops.load_gdt = lguest_load_gdt;
 	pv_cpu_ops.cpuid = lguest_cpuid;
 	pv_cpu_ops.load_idt = lguest_load_idt;
@@ -1127,7 +1294,7 @@ __init void lguest_init(void)
 	pv_cpu_ops.start_context_switch = paravirt_start_context_switch;
 	pv_cpu_ops.end_context_switch = lguest_end_context_switch;
 
-	/* pagetable management */
+	/* Pagetable management */
 	pv_mmu_ops.write_cr3 = lguest_write_cr3;
 	pv_mmu_ops.flush_tlb_user = lguest_flush_tlb_user;
 	pv_mmu_ops.flush_tlb_single = lguest_flush_tlb_single;
@@ -1149,54 +1316,71 @@ __init void lguest_init(void)
 	pv_mmu_ops.pte_update_defer = lguest_pte_update;
 
 #ifdef CONFIG_X86_LOCAL_APIC
-	/* apic read/write intercepts */
+	/* APIC read/write intercepts */
 	set_lguest_basic_apic_ops();
 #endif
 
-	/* time operations */
+	/* Time operations */
 	pv_time_ops.get_wallclock = lguest_get_wallclock;
 	pv_time_ops.time_init = lguest_time_init;
 	pv_time_ops.get_tsc_khz = lguest_tsc_khz;
 
-	/* Now is a good time to look at the implementations of these functions
-	 * before returning to the rest of lguest_init(). */
+	/*
+	 * Now is a good time to look at the implementations of these functions
+	 * before returning to the rest of lguest_init().
+	 */
 
-	/*G:070 Now we've seen all the paravirt_ops, we return to
+	/*G:070
+	 * Now we've seen all the paravirt_ops, we return to
 	 * lguest_init() where the rest of the fairly chaotic boot setup
-	 * occurs. */
+	 * occurs.
+	 */
 
-	/* The stack protector is a weird thing where gcc places a canary
+	/*
+	 * The stack protector is a weird thing where gcc places a canary
 	 * value on the stack and then checks it on return.  This file is
 	 * compiled with -fno-stack-protector it, so we got this far without
 	 * problems.  The value of the canary is kept at offset 20 from the
 	 * %gs register, so we need to set that up before calling C functions
-	 * in other files. */
+	 * in other files.
+	 */
 	setup_stack_canary_segment(0);
-	/* We could just call load_stack_canary_segment(), but we might as
-	 * call switch_to_new_gdt() which loads the whole table and sets up
-	 * the per-cpu segment descriptor register %fs as well. */
+
+	/*
+	 * We could just call load_stack_canary_segment(), but we might as well
+	 * call switch_to_new_gdt() which loads the whole table and sets up the
+	 * per-cpu segment descriptor register %fs as well.
+	 */
 	switch_to_new_gdt(0);
 
-	/* As described in head_32.S, we map the first 128M of memory. */
+	/* We actually boot with all memory mapped, but let's say 128MB. */
 	max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
 
-	/* The Host<->Guest Switcher lives at the top of our address space, and
+	/*
+	 * The Host<->Guest Switcher lives at the top of our address space, and
 	 * the Host told us how big it is when we made LGUEST_INIT hypercall:
-	 * it put the answer in lguest_data.reserve_mem  */
+	 * it put the answer in lguest_data.reserve_mem
+	 */
 	reserve_top_address(lguest_data.reserve_mem);
 
-	/* If we don't initialize the lock dependency checker now, it crashes
-	 * paravirt_disable_iospace. */
+	/*
+	 * If we don't initialize the lock dependency checker now, it crashes
+	 * paravirt_disable_iospace.
+	 */
 	lockdep_init();
 
-	/* The IDE code spends about 3 seconds probing for disks: if we reserve
+	/*
+	 * The IDE code spends about 3 seconds probing for disks: if we reserve
 	 * all the I/O ports up front it can't get them and so doesn't probe.
 	 * Other device drivers are similar (but less severe).  This cuts the
-	 * kernel boot time on my machine from 4.1 seconds to 0.45 seconds. */
+	 * kernel boot time on my machine from 4.1 seconds to 0.45 seconds.
+	 */
 	paravirt_disable_iospace();
 
-	/* This is messy CPU setup stuff which the native boot code does before
-	 * start_kernel, so we have to do, too: */
+	/*
+	 * This is messy CPU setup stuff which the native boot code does before
+	 * start_kernel, so we have to do, too:
+	 */
 	cpu_detect(&new_cpu_data);
 	/* head.S usually sets up the first capability word, so do it here. */
 	new_cpu_data.x86_capability[0] = cpuid_edx(1);
@@ -1213,22 +1397,28 @@ __init void lguest_init(void)
 	acpi_ht = 0;
 #endif
 
-	/* We set the preferred console to "hvc".  This is the "hypervisor
+	/*
+	 * We set the preferred console to "hvc".  This is the "hypervisor
 	 * virtual console" driver written by the PowerPC people, which we also
-	 * adapted for lguest's use. */
+	 * adapted for lguest's use.
+	 */
 	add_preferred_console("hvc", 0, NULL);
 
 	/* Register our very early console. */
 	virtio_cons_early_init(early_put_chars);
 
-	/* Last of all, we set the power management poweroff hook to point to
+	/*
+	 * Last of all, we set the power management poweroff hook to point to
 	 * the Guest routine to power off, and the reboot hook to our restart
-	 * routine. */
+	 * routine.
+	 */
 	pm_power_off = lguest_power_off;
 	machine_ops.restart = lguest_restart;
 
-	/* Now we're set up, call i386_start_kernel() in head32.c and we proceed
-	 * to boot as normal.  It never returns. */
+	/*
+	 * Now we're set up, call i386_start_kernel() in head32.c and we proceed
+	 * to boot as normal.  It never returns.
+	 */
 	i386_start_kernel();
 }
 /*
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index a9c8cfe61cd..27eac0faee4 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -5,7 +5,8 @@
 #include <asm/thread_info.h>
 #include <asm/processor-flags.h>
 
-/*G:020 Our story starts with the kernel booting into startup_32 in
+/*G:020
+ * Our story starts with the kernel booting into startup_32 in
  * arch/x86/kernel/head_32.S.  It expects a boot header, which is created by
  * the bootloader (the Launcher in our case).
  *
@@ -21,11 +22,14 @@
  * data without remembering to subtract __PAGE_OFFSET!
  *
  * The .section line puts this code in .init.text so it will be discarded after
- * boot. */
+ * boot.
+ */
 .section .init.text, "ax", @progbits
 ENTRY(lguest_entry)
-	/* We make the "initialization" hypercall now to tell the Host about
-	 * us, and also find out where it put our page tables. */
+	/*
+	 * We make the "initialization" hypercall now to tell the Host about
+	 * us, and also find out where it put our page tables.
+	 */
 	movl $LHCALL_LGUEST_INIT, %eax
 	movl $lguest_data - __PAGE_OFFSET, %ebx
 	.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
@@ -33,13 +37,14 @@ ENTRY(lguest_entry)
 	/* Set up the initial stack so we can run C code. */
 	movl $(init_thread_union+THREAD_SIZE),%esp
 
-	/* Jumps are relative, and we're running __PAGE_OFFSET too low at the
-	 * moment. */
+	/* Jumps are relative: we're running __PAGE_OFFSET too low. */
 	jmp lguest_init+__PAGE_OFFSET
 
-/*G:055 We create a macro which puts the assembler code between lgstart_ and
- * lgend_ markers.  These templates are put in the .text section: they can't be
- * discarded after boot as we may need to patch modules, too. */
+/*G:055
+ * We create a macro which puts the assembler code between lgstart_ and lgend_
+ * markers.  These templates are put in the .text section: they can't be
+ * discarded after boot as we may need to patch modules, too.
+ */
 .text
 #define LGUEST_PATCH(name, insns...)			\
 	lgstart_##name:	insns; lgend_##name:;		\
@@ -48,83 +53,103 @@ ENTRY(lguest_entry)
 LGUEST_PATCH(cli, movl $0, lguest_data+LGUEST_DATA_irq_enabled)
 LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax)
 
-/*G:033 But using those wrappers is inefficient (we'll see why that doesn't
- * matter for save_fl and irq_disable later).  If we write our routines
- * carefully in assembler, we can avoid clobbering any registers and avoid
- * jumping through the wrapper functions.
+/*G:033
+ * But using those wrappers is inefficient (we'll see why that doesn't matter
+ * for save_fl and irq_disable later).  If we write our routines carefully in
+ * assembler, we can avoid clobbering any registers and avoid jumping through
+ * the wrapper functions.
  *
  * I skipped over our first piece of assembler, but this one is worth studying
- * in a bit more detail so I'll describe in easy stages.  First, the routine
- * to enable interrupts: */
+ * in a bit more detail so I'll describe in easy stages.  First, the routine to
+ * enable interrupts:
+ */
 ENTRY(lg_irq_enable)
-	/* The reverse of irq_disable, this sets lguest_data.irq_enabled to
-	 * X86_EFLAGS_IF (ie. "Interrupts enabled"). */
+	/*
+	 * The reverse of irq_disable, this sets lguest_data.irq_enabled to
+	 * X86_EFLAGS_IF (ie. "Interrupts enabled").
+	 */
 	movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled
-	/* But now we need to check if the Host wants to know: there might have
+	/*
+	 * But now we need to check if the Host wants to know: there might have
 	 * been interrupts waiting to be delivered, in which case it will have
 	 * set lguest_data.irq_pending to X86_EFLAGS_IF.  If it's not zero, we
-	 * jump to send_interrupts, otherwise we're done. */
+	 * jump to send_interrupts, otherwise we're done.
+	 */
 	testl $0, lguest_data+LGUEST_DATA_irq_pending
 	jnz send_interrupts
-	/* One cool thing about x86 is that you can do many things without using
+	/*
+	 * One cool thing about x86 is that you can do many things without using
 	 * a register.  In this case, the normal path hasn't needed to save or
-	 * restore any registers at all! */
+	 * restore any registers at all!
+	 */
 	ret
 send_interrupts:
-	/* OK, now we need a register: eax is used for the hypercall number,
+	/*
+	 * OK, now we need a register: eax is used for the hypercall number,
 	 * which is LHCALL_SEND_INTERRUPTS.
 	 *
 	 * We used not to bother with this pending detection at all, which was
 	 * much simpler.  Sooner or later the Host would realize it had to
 	 * send us an interrupt.  But that turns out to make performance 7
 	 * times worse on a simple tcp benchmark.  So now we do this the hard
-	 * way. */
+	 * way.
+	 */
 	pushl %eax
 	movl $LHCALL_SEND_INTERRUPTS, %eax
-	/* This is a vmcall instruction (same thing that KVM uses).  Older
+	/*
+	 * This is a vmcall instruction (same thing that KVM uses).  Older
 	 * assembler versions might not know the "vmcall" instruction, so we
-	 * create one manually here. */
+	 * create one manually here.
+	 */
 	.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
+	/* Put eax back the way we found it. */
 	popl %eax
 	ret
 
-/* Finally, the "popf" or "restore flags" routine.  The %eax register holds the
+/*
+ * Finally, the "popf" or "restore flags" routine.  The %eax register holds the
  * flags (in practice, either X86_EFLAGS_IF or 0): if it's X86_EFLAGS_IF we're
- * enabling interrupts again, if it's 0 we're leaving them off. */
+ * enabling interrupts again, if it's 0 we're leaving them off.
+ */
 ENTRY(lg_restore_fl)
 	/* This is just "lguest_data.irq_enabled = flags;" */
 	movl %eax, lguest_data+LGUEST_DATA_irq_enabled
-	/* Now, if the %eax value has enabled interrupts and
+	/*
+	 * Now, if the %eax value has enabled interrupts and
 	 * lguest_data.irq_pending is set, we want to tell the Host so it can
 	 * deliver any outstanding interrupts.  Fortunately, both values will
 	 * be X86_EFLAGS_IF (ie. 512) in that case, and the "testl"
 	 * instruction will AND them together for us.  If both are set, we
-	 * jump to send_interrupts. */
+	 * jump to send_interrupts.
+	 */
 	testl lguest_data+LGUEST_DATA_irq_pending, %eax
 	jnz send_interrupts
 	/* Again, the normal path has used no extra registers.  Clever, huh? */
 	ret
+/*:*/
 
 /* These demark the EIP range where host should never deliver interrupts. */
 .global lguest_noirq_start
 .global lguest_noirq_end
 
-/*M:004 When the Host reflects a trap or injects an interrupt into the Guest,
- * it sets the eflags interrupt bit on the stack based on
- * lguest_data.irq_enabled, so the Guest iret logic does the right thing when
- * restoring it.  However, when the Host sets the Guest up for direct traps,
- * such as system calls, the processor is the one to push eflags onto the
- * stack, and the interrupt bit will be 1 (in reality, interrupts are always
- * enabled in the Guest).
+/*M:004
+ * When the Host reflects a trap or injects an interrupt into the Guest, it
+ * sets the eflags interrupt bit on the stack based on lguest_data.irq_enabled,
+ * so the Guest iret logic does the right thing when restoring it.  However,
+ * when the Host sets the Guest up for direct traps, such as system calls, the
+ * processor is the one to push eflags onto the stack, and the interrupt bit
+ * will be 1 (in reality, interrupts are always enabled in the Guest).
  *
  * This turns out to be harmless: the only trap which should happen under Linux
  * with interrupts disabled is Page Fault (due to our lazy mapping of vmalloc
  * regions), which has to be reflected through the Host anyway.  If another
  * trap *does* go off when interrupts are disabled, the Guest will panic, and
- * we'll never get to this iret! :*/
+ * we'll never get to this iret!
+:*/
 
-/*G:045 There is one final paravirt_op that the Guest implements, and glancing
- * at it you can see why I left it to last.  It's *cool*!  It's in *assembler*!
+/*G:045
+ * There is one final paravirt_op that the Guest implements, and glancing at it
+ * you can see why I left it to last.  It's *cool*!  It's in *assembler*!
  *
  * The "iret" instruction is used to return from an interrupt or trap.  The
  * stack looks like this:
@@ -148,15 +173,18 @@ ENTRY(lg_restore_fl)
  * return to userspace or wherever.  Our solution to this is to surround the
  * code with lguest_noirq_start: and lguest_noirq_end: labels.  We tell the
  * Host that it is *never* to interrupt us there, even if interrupts seem to be
- * enabled. */
+ * enabled.
+ */
 ENTRY(lguest_iret)
 	pushl	%eax
 	movl	12(%esp), %eax
 lguest_noirq_start:
-	/* Note the %ss: segment prefix here.  Normal data accesses use the
+	/*
+	 * Note the %ss: segment prefix here.  Normal data accesses use the
 	 * "ds" segment, but that will have already been restored for whatever
 	 * we're returning to (such as userspace): we can't trust it.  The %ss:
-	 * prefix makes sure we use the stack segment, which is still valid. */
+	 * prefix makes sure we use the stack segment, which is still valid.
+	 */
 	movl	%eax,%ss:lguest_data+LGUEST_DATA_irq_enabled
 	popl	%eax
 	iret
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index f9d35632666..07c31899c9c 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -10,6 +10,7 @@ lib-y += usercopy_$(BITS).o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
 
 ifeq ($(CONFIG_X86_32),y)
+        obj-y += atomic64_32.o
         lib-y += checksum_32.o
         lib-y += strstr_32.o
         lib-y += semaphore_32.o string_32.o
diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
new file mode 100644
index 00000000000..824fa0be55a
--- /dev/null
+++ b/arch/x86/lib/atomic64_32.c
@@ -0,0 +1,230 @@
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include <asm/processor.h>
+#include <asm/cmpxchg.h>
+#include <asm/atomic.h>
+
+static noinline u64 cmpxchg8b(u64 *ptr, u64 old, u64 new)
+{
+	u32 low = new;
+	u32 high = new >> 32;
+
+	asm volatile(
+		LOCK_PREFIX "cmpxchg8b %1\n"
+		     : "+A" (old), "+m" (*ptr)
+		     :  "b" (low),  "c" (high)
+		     );
+	return old;
+}
+
+u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val)
+{
+	return cmpxchg8b(&ptr->counter, old_val, new_val);
+}
+EXPORT_SYMBOL(atomic64_cmpxchg);
+
+/**
+ * atomic64_xchg - xchg atomic64 variable
+ * @ptr:      pointer to type atomic64_t
+ * @new_val:  value to assign
+ *
+ * Atomically xchgs the value of @ptr to @new_val and returns
+ * the old value.
+ */
+u64 atomic64_xchg(atomic64_t *ptr, u64 new_val)
+{
+	/*
+	 * Try first with a (possibly incorrect) assumption about
+	 * what we have there. We'll do two loops most likely,
+	 * but we'll get an ownership MESI transaction straight away
+	 * instead of a read transaction followed by a
+	 * flush-for-ownership transaction:
+	 */
+	u64 old_val, real_val = 0;
+
+	do {
+		old_val = real_val;
+
+		real_val = atomic64_cmpxchg(ptr, old_val, new_val);
+
+	} while (real_val != old_val);
+
+	return old_val;
+}
+EXPORT_SYMBOL(atomic64_xchg);
+
+/**
+ * atomic64_set - set atomic64 variable
+ * @ptr:      pointer to type atomic64_t
+ * @new_val:  value to assign
+ *
+ * Atomically sets the value of @ptr to @new_val.
+ */
+void atomic64_set(atomic64_t *ptr, u64 new_val)
+{
+	atomic64_xchg(ptr, new_val);
+}
+EXPORT_SYMBOL(atomic64_set);
+
+/**
+EXPORT_SYMBOL(atomic64_read);
+ * atomic64_add_return - add and return
+ * @delta: integer value to add
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr and returns @delta + *@ptr
+ */
+noinline u64 atomic64_add_return(u64 delta, atomic64_t *ptr)
+{
+	/*
+	 * Try first with a (possibly incorrect) assumption about
+	 * what we have there. We'll do two loops most likely,
+	 * but we'll get an ownership MESI transaction straight away
+	 * instead of a read transaction followed by a
+	 * flush-for-ownership transaction:
+	 */
+	u64 old_val, new_val, real_val = 0;
+
+	do {
+		old_val = real_val;
+		new_val = old_val + delta;
+
+		real_val = atomic64_cmpxchg(ptr, old_val, new_val);
+
+	} while (real_val != old_val);
+
+	return new_val;
+}
+EXPORT_SYMBOL(atomic64_add_return);
+
+u64 atomic64_sub_return(u64 delta, atomic64_t *ptr)
+{
+	return atomic64_add_return(-delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_sub_return);
+
+u64 atomic64_inc_return(atomic64_t *ptr)
+{
+	return atomic64_add_return(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc_return);
+
+u64 atomic64_dec_return(atomic64_t *ptr)
+{
+	return atomic64_sub_return(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec_return);
+
+/**
+ * atomic64_add - add integer to atomic64 variable
+ * @delta: integer value to add
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr.
+ */
+void atomic64_add(u64 delta, atomic64_t *ptr)
+{
+	atomic64_add_return(delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_add);
+
+/**
+ * atomic64_sub - subtract the atomic64 variable
+ * @delta: integer value to subtract
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically subtracts @delta from @ptr.
+ */
+void atomic64_sub(u64 delta, atomic64_t *ptr)
+{
+	atomic64_add(-delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_sub);
+
+/**
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @delta: integer value to subtract
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically subtracts @delta from @ptr and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+int atomic64_sub_and_test(u64 delta, atomic64_t *ptr)
+{
+	u64 new_val = atomic64_sub_return(delta, ptr);
+
+	return new_val == 0;
+}
+EXPORT_SYMBOL(atomic64_sub_and_test);
+
+/**
+ * atomic64_inc - increment atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically increments @ptr by 1.
+ */
+void atomic64_inc(atomic64_t *ptr)
+{
+	atomic64_add(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc);
+
+/**
+ * atomic64_dec - decrement atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1.
+ */
+void atomic64_dec(atomic64_t *ptr)
+{
+	atomic64_sub(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec);
+
+/**
+ * atomic64_dec_and_test - decrement and test
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+int atomic64_dec_and_test(atomic64_t *ptr)
+{
+	return atomic64_sub_and_test(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec_and_test);
+
+/**
+ * atomic64_inc_and_test - increment and test
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically increments @ptr by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+int atomic64_inc_and_test(atomic64_t *ptr)
+{
+	return atomic64_sub_and_test(-1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc_and_test);
+
+/**
+ * atomic64_add_negative - add and test if negative
+ * @delta: integer value to add
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+int atomic64_add_negative(u64 delta, atomic64_t *ptr)
+{
+	s64 new_val = atomic64_add_return(delta, ptr);
+
+	return new_val < 0;
+}
+EXPORT_SYMBOL(atomic64_add_negative);
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index 9a10a78bb4a..ebeafcce04a 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -5,15 +5,14 @@
  * Zero a page. 	
  * rdi	page
  */			
-	ALIGN
-clear_page_c:
+ENTRY(clear_page_c)
 	CFI_STARTPROC
 	movl $4096/8,%ecx
 	xorl %eax,%eax
 	rep stosq
 	ret
 	CFI_ENDPROC
-ENDPROC(clear_page)
+ENDPROC(clear_page_c)
 
 ENTRY(clear_page)
 	CFI_STARTPROC
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index f118c110af3..6ba0f7bb85e 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -75,6 +75,7 @@ ENTRY(copy_to_user)
 	jae bad_to_user
 	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
 	CFI_ENDPROC
+ENDPROC(copy_to_user)
 
 /* Standard copy_from_user with segment limit checking */
 ENTRY(copy_from_user)
diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
index f4568605d7d..ff485d36118 100644
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -55,8 +55,10 @@ static void delay_tsc(unsigned long loops)
 
 	preempt_disable();
 	cpu = smp_processor_id();
+	rdtsc_barrier();
 	rdtscl(bclock);
 	for (;;) {
+		rdtsc_barrier();
 		rdtscl(now);
 		if ((now - bclock) >= loops)
 			break;
@@ -78,6 +80,7 @@ static void delay_tsc(unsigned long loops)
 		if (unlikely(cpu != smp_processor_id())) {
 			loops -= (now - bclock);
 			cpu = smp_processor_id();
+			rdtsc_barrier();
 			rdtscl(bclock);
 		}
 	}
diff --git a/arch/x86/lib/msr.c b/arch/x86/lib/msr.c
index 1440b9c0547..caa24aca811 100644
--- a/arch/x86/lib/msr.c
+++ b/arch/x86/lib/msr.c
@@ -89,16 +89,13 @@ void rdmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs)
 	rv.msrs	  = msrs;
 	rv.msr_no = msr_no;
 
-	preempt_disable();
-	/*
-	 * FIXME: handle the CPU we're executing on separately for now until
-	 * smp_call_function_many has been fixed to not skip it.
-	 */
-	this_cpu = raw_smp_processor_id();
-	smp_call_function_single(this_cpu, __rdmsr_on_cpu, &rv, 1);
+	this_cpu = get_cpu();
+
+	if (cpumask_test_cpu(this_cpu, mask))
+		__rdmsr_on_cpu(&rv);
 
 	smp_call_function_many(mask, __rdmsr_on_cpu, &rv, 1);
-	preempt_enable();
+	put_cpu();
 }
 EXPORT_SYMBOL(rdmsr_on_cpus);
 
@@ -121,16 +118,13 @@ void wrmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs)
 	rv.msrs   = msrs;
 	rv.msr_no = msr_no;
 
-	preempt_disable();
-	/*
-	 * FIXME: handle the CPU we're executing on separately for now until
-	 * smp_call_function_many has been fixed to not skip it.
-	 */
-	this_cpu = raw_smp_processor_id();
-	smp_call_function_single(this_cpu, __wrmsr_on_cpu, &rv, 1);
+	this_cpu = get_cpu();
+
+	if (cpumask_test_cpu(this_cpu, mask))
+		__wrmsr_on_cpu(&rv);
 
 	smp_call_function_many(mask, __wrmsr_on_cpu, &rv, 1);
-	preempt_enable();
+	put_cpu();
 }
 EXPORT_SYMBOL(wrmsr_on_cpus);
 
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index 7c8ca91bb9e..1f118d462ac 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -751,7 +751,7 @@ survive:
 
 			if (retval == -ENOMEM && is_global_init(current)) {
 				up_read(&current->mm->mmap_sem);
-				congestion_wait(WRITE, HZ/50);
+				congestion_wait(BLK_RW_ASYNC, HZ/50);
 				goto survive;
 			}
 
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 78a5fff857b..bfae139182f 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -426,10 +426,11 @@ static noinline int vmalloc_fault(unsigned long address)
 }
 
 static const char errata93_warning[] =
-KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
-KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
-KERN_ERR "******* Please consider a BIOS update.\n"
-KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
+KERN_ERR 
+"******* Your BIOS seems to not contain a fix for K8 errata #93\n"
+"******* Working around it, but it may cause SEGVs or burn power.\n"
+"******* Please consider a BIOS update.\n"
+"******* Disabling USB legacy in the BIOS may also help.\n";
 
 /*
  * No vm86 mode in 64-bit mode:
@@ -696,7 +697,7 @@ show_signal_msg(struct pt_regs *regs, unsigned long error_code,
 	if (!printk_ratelimit())
 		return;
 
-	printk(KERN_CONT "%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
+	printk("%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
 		task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
 		tsk->comm, task_pid_nr(tsk), address,
 		(void *)regs->ip, (void *)regs->sp, error_code);
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 58f621e8191..2112ed55e7e 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -103,6 +103,7 @@ EXPORT_SYMBOL(kmap);
 EXPORT_SYMBOL(kunmap);
 EXPORT_SYMBOL(kmap_atomic);
 EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_prot);
 
 void __init set_highmem_pages_init(void)
 {
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index f53b57e4086..0607119cef9 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -12,6 +12,7 @@
 #include <asm/system.h>
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
+#include <asm/proto.h>
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
@@ -177,20 +178,6 @@ static int __meminit save_mr(struct map_range *mr, int nr_range,
 	return nr_range;
 }
 
-#ifdef CONFIG_X86_64
-static void __init init_gbpages(void)
-{
-	if (direct_gbpages && cpu_has_gbpages)
-		printk(KERN_INFO "Using GB pages for direct mapping\n");
-	else
-		direct_gbpages = 0;
-}
-#else
-static inline void init_gbpages(void)
-{
-}
-#endif
-
 /*
  * Setup the direct mapping of the physical memory at PAGE_OFFSET.
  * This runs before bootmem is initialized and gets pages directly from
@@ -210,9 +197,6 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 
 	printk(KERN_INFO "init_memory_mapping: %016lx-%016lx\n", start, end);
 
-	if (!after_bootmem)
-		init_gbpages();
-
 #if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KMEMCHECK)
 	/*
 	 * For CONFIG_DEBUG_PAGEALLOC, identity mapping will use small pages.
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index c4378f4fd4a..ea56b8cbb6a 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -598,6 +598,15 @@ void __init paging_init(void)
 
 	sparse_memory_present_with_active_regions(MAX_NUMNODES);
 	sparse_init();
+
+	/*
+	 * clear the default setting with node 0
+	 * note: don't use nodes_clear here, that is really clearing when
+	 *	 numa support is not compiled in, and later node_set_state
+	 *	 will not set it back.
+	 */
+	node_clear_state(0, N_NORMAL_MEMORY);
+
 	free_area_init_nodes(max_zone_pfns);
 }
 
@@ -787,7 +796,7 @@ int __init reserve_bootmem_generic(unsigned long phys, unsigned long len,
 		return ret;
 
 #else
-	reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
+	reserve_bootmem(phys, len, flags);
 #endif
 
 	if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) {
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 3cfe9ced8a4..7e600c1962d 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -11,6 +11,7 @@
 #include <linux/interrupt.h>
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
+#include <linux/pfn.h>
 
 #include <asm/e820.h>
 #include <asm/processor.h>
@@ -590,9 +591,12 @@ static int __change_page_attr(struct cpa_data *cpa, int primary)
 	unsigned int level;
 	pte_t *kpte, old_pte;
 
-	if (cpa->flags & CPA_PAGES_ARRAY)
-		address = (unsigned long)page_address(cpa->pages[cpa->curpage]);
-	else if (cpa->flags & CPA_ARRAY)
+	if (cpa->flags & CPA_PAGES_ARRAY) {
+		struct page *page = cpa->pages[cpa->curpage];
+		if (unlikely(PageHighMem(page)))
+			return 0;
+		address = (unsigned long)page_address(page);
+	} else if (cpa->flags & CPA_ARRAY)
 		address = cpa->vaddr[cpa->curpage];
 	else
 		address = *cpa->vaddr;
@@ -681,8 +685,9 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias);
 static int cpa_process_alias(struct cpa_data *cpa)
 {
 	struct cpa_data alias_cpa;
-	int ret = 0;
-	unsigned long temp_cpa_vaddr, vaddr;
+	unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT);
+	unsigned long vaddr, remapped;
+	int ret;
 
 	if (cpa->pfn >= max_pfn_mapped)
 		return 0;
@@ -695,9 +700,12 @@ static int cpa_process_alias(struct cpa_data *cpa)
 	 * No need to redo, when the primary call touched the direct
 	 * mapping already:
 	 */
-	if (cpa->flags & CPA_PAGES_ARRAY)
-		vaddr = (unsigned long)page_address(cpa->pages[cpa->curpage]);
-	else if (cpa->flags & CPA_ARRAY)
+	if (cpa->flags & CPA_PAGES_ARRAY) {
+		struct page *page = cpa->pages[cpa->curpage];
+		if (unlikely(PageHighMem(page)))
+			return 0;
+		vaddr = (unsigned long)page_address(page);
+	} else if (cpa->flags & CPA_ARRAY)
 		vaddr = cpa->vaddr[cpa->curpage];
 	else
 		vaddr = *cpa->vaddr;
@@ -706,42 +714,55 @@ static int cpa_process_alias(struct cpa_data *cpa)
 		    PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) {
 
 		alias_cpa = *cpa;
-		temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
-		alias_cpa.vaddr = &temp_cpa_vaddr;
+		alias_cpa.vaddr = &laddr;
 		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
 
-
 		ret = __change_page_attr_set_clr(&alias_cpa, 0);
+		if (ret)
+			return ret;
 	}
 
 #ifdef CONFIG_X86_64
-	if (ret)
-		return ret;
-	/*
-	 * No need to redo, when the primary call touched the high
-	 * mapping already:
-	 */
-	if (within(vaddr, (unsigned long) _text, _brk_end))
-		return 0;
-
 	/*
-	 * If the physical address is inside the kernel map, we need
+	 * If the primary call didn't touch the high mapping already
+	 * and the physical address is inside the kernel map, we need
 	 * to touch the high mapped kernel as well:
 	 */
-	if (!within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn()))
-		return 0;
+	if (!within(vaddr, (unsigned long)_text, _brk_end) &&
+	    within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn())) {
+		unsigned long temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) +
+					       __START_KERNEL_map - phys_base;
+		alias_cpa = *cpa;
+		alias_cpa.vaddr = &temp_cpa_vaddr;
+		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
 
-	alias_cpa = *cpa;
-	temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) + __START_KERNEL_map - phys_base;
-	alias_cpa.vaddr = &temp_cpa_vaddr;
-	alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+		/*
+		 * The high mapping range is imprecise, so ignore the
+		 * return value.
+		 */
+		__change_page_attr_set_clr(&alias_cpa, 0);
+	}
+#endif
 
 	/*
-	 * The high mapping range is imprecise, so ignore the return value.
+	 * If the PMD page was partially used for per-cpu remapping,
+	 * the recycled area needs to be split and modified.  Because
+	 * the area is always proper subset of a PMD page
+	 * cpa->numpages is guaranteed to be 1 for these areas, so
+	 * there's no need to loop over and check for further remaps.
 	 */
-	__change_page_attr_set_clr(&alias_cpa, 0);
-#endif
-	return ret;
+	remapped = (unsigned long)pcpu_lpage_remapped((void *)laddr);
+	if (remapped) {
+		WARN_ON(cpa->numpages > 1);
+		alias_cpa = *cpa;
+		alias_cpa.vaddr = &remapped;
+		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+		ret = __change_page_attr_set_clr(&alias_cpa, 0);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
@@ -982,12 +1003,15 @@ EXPORT_SYMBOL(set_memory_array_uc);
 int _set_memory_wc(unsigned long addr, int numpages)
 {
 	int ret;
+	unsigned long addr_copy = addr;
+
 	ret = change_page_attr_set(&addr, numpages,
 				    __pgprot(_PAGE_CACHE_UC_MINUS), 0);
-
 	if (!ret) {
-		ret = change_page_attr_set(&addr, numpages,
-				    __pgprot(_PAGE_CACHE_WC), 0);
+		ret = change_page_attr_set_clr(&addr_copy, numpages,
+					       __pgprot(_PAGE_CACHE_WC),
+					       __pgprot(_PAGE_CACHE_MASK),
+					       0, 0, NULL);
 	}
 	return ret;
 }
@@ -1104,7 +1128,9 @@ int set_pages_array_uc(struct page **pages, int addrinarray)
 	int free_idx;
 
 	for (i = 0; i < addrinarray; i++) {
-		start = (unsigned long)page_address(pages[i]);
+		if (PageHighMem(pages[i]))
+			continue;
+		start = page_to_pfn(pages[i]) << PAGE_SHIFT;
 		end = start + PAGE_SIZE;
 		if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL))
 			goto err_out;
@@ -1117,7 +1143,9 @@ int set_pages_array_uc(struct page **pages, int addrinarray)
 err_out:
 	free_idx = i;
 	for (i = 0; i < free_idx; i++) {
-		start = (unsigned long)page_address(pages[i]);
+		if (PageHighMem(pages[i]))
+			continue;
+		start = page_to_pfn(pages[i]) << PAGE_SHIFT;
 		end = start + PAGE_SIZE;
 		free_memtype(start, end);
 	}
@@ -1146,7 +1174,9 @@ int set_pages_array_wb(struct page **pages, int addrinarray)
 		return retval;
 
 	for (i = 0; i < addrinarray; i++) {
-		start = (unsigned long)page_address(pages[i]);
+		if (PageHighMem(pages[i]))
+			continue;
+		start = page_to_pfn(pages[i]) << PAGE_SHIFT;
 		end = start + PAGE_SIZE;
 		free_memtype(start, end);
 	}
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index e6718bb2806..352aa9e927e 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -623,7 +623,8 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
 		return ret;
 
 	if (flags != want_flags) {
-		if (strict_prot || !is_new_memtype_allowed(want_flags, flags)) {
+		if (strict_prot ||
+		    !is_new_memtype_allowed(paddr, size, want_flags, flags)) {
 			free_memtype(paddr, paddr + size);
 			printk(KERN_ERR "%s:%d map pfn expected mapping type %s"
 				" for %Lx-%Lx, got %s\n",
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 8e43bdd4545..ed34f5e3599 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -25,7 +25,7 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
 	return pte;
 }
 
-void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
+void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
 {
 	pgtable_page_dtor(pte);
 	paravirt_release_pte(page_to_pfn(pte));
@@ -33,14 +33,14 @@ void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
 }
 
 #if PAGETABLE_LEVELS > 2
-void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
 {
 	paravirt_release_pmd(__pa(pmd) >> PAGE_SHIFT);
 	tlb_remove_page(tlb, virt_to_page(pmd));
 }
 
 #if PAGETABLE_LEVELS > 3
-void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
 {
 	paravirt_release_pud(__pa(pud) >> PAGE_SHIFT);
 	tlb_remove_page(tlb, virt_to_page(pud));
@@ -329,7 +329,6 @@ void __init reserve_top_address(unsigned long reserve)
 	printk(KERN_INFO "Reserving virtual address space above 0x%08x\n",
 	       (int)-reserve);
 	__FIXADDR_TOP = -reserve - PAGE_SIZE;
-	__VMALLOC_RESERVE += reserve;
 #endif
 }
 
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 2dfcbf9df2a..dbb5381f7b3 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -79,8 +79,10 @@ static __init void bad_srat(void)
 	acpi_numa = -1;
 	for (i = 0; i < MAX_LOCAL_APIC; i++)
 		apicid_to_node[i] = NUMA_NO_NODE;
-	for (i = 0; i < MAX_NUMNODES; i++)
-		nodes_add[i].start = nodes[i].end = 0;
+	for (i = 0; i < MAX_NUMNODES; i++) {
+		nodes[i].start = nodes[i].end = 0;
+		nodes_add[i].start = nodes_add[i].end = 0;
+	}
 	remove_all_active_ranges();
 }
 
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 821e97017e9..c814e144a3f 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -183,18 +183,17 @@ static void flush_tlb_others_ipi(const struct cpumask *cpumask,
 
 	f->flush_mm = mm;
 	f->flush_va = va;
-	cpumask_andnot(to_cpumask(f->flush_cpumask),
-		       cpumask, cpumask_of(smp_processor_id()));
-
-	/*
-	 * We have to send the IPI only to
-	 * CPUs affected.
-	 */
-	apic->send_IPI_mask(to_cpumask(f->flush_cpumask),
-		      INVALIDATE_TLB_VECTOR_START + sender);
+	if (cpumask_andnot(to_cpumask(f->flush_cpumask), cpumask, cpumask_of(smp_processor_id()))) {
+		/*
+		 * We have to send the IPI only to
+		 * CPUs affected.
+		 */
+		apic->send_IPI_mask(to_cpumask(f->flush_cpumask),
+			      INVALIDATE_TLB_VECTOR_START + sender);
 
-	while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
-		cpu_relax();
+		while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
+			cpu_relax();
+	}
 
 	f->flush_mm = NULL;
 	f->flush_va = 0;
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index b07dd8d0b32..89b9a5cd63d 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -390,7 +390,7 @@ static int __init p4_init(char **cpu_type)
 static int force_arch_perfmon;
 static int force_cpu_type(const char *str, struct kernel_param *kp)
 {
-	if (!strcmp(str, "archperfmon")) {
+	if (!strcmp(str, "arch_perfmon")) {
 		force_arch_perfmon = 1;
 		printk(KERN_INFO "oprofile: forcing architectural perfmon\n");
 	}
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index b26626dc517..1014eb4bfc3 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -68,6 +68,10 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	unsigned long flags;
 	struct resource *root;
 	int max_root_bus_resources = PCI_BUS_NUM_RESOURCES;
+	u64 start, end;
+
+	if (bus_has_transparent_bridge(info->bus))
+		max_root_bus_resources -= 3;
 
 	status = resource_to_addr(acpi_res, &addr);
 	if (!ACPI_SUCCESS(status))
@@ -84,25 +88,24 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	} else
 		return AE_OK;
 
-	res = &info->res[info->res_num];
-	res->name = info->name;
-	res->flags = flags;
-	res->start = addr.minimum + addr.translation_offset;
-	res->end = res->start + addr.address_length - 1;
-	res->child = NULL;
-
-	if (bus_has_transparent_bridge(info->bus))
-		max_root_bus_resources -= 3;
+	start = addr.minimum + addr.translation_offset;
+	end = start + addr.address_length - 1;
 	if (info->res_num >= max_root_bus_resources) {
 		printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx "
 			"from %s for %s due to _CRS returning more than "
-			"%d resource descriptors\n", (unsigned long) res->start,
-			(unsigned long) res->end, root->name, info->name,
+			"%d resource descriptors\n", (unsigned long) start,
+			(unsigned long) end, root->name, info->name,
 			max_root_bus_resources);
-		info->res_num++;
 		return AE_OK;
 	}
 
+	res = &info->res[info->res_num];
+	res->name = info->name;
+	res->flags = flags;
+	res->start = start;
+	res->end = end;
+	res->child = NULL;
+
 	if (insert_resource(root, res)) {
 		printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx "
 			"from %s for %s\n", (unsigned long) res->start,
@@ -115,23 +118,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 }
 
 static void
-adjust_transparent_bridge_resources(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		int i;
-		u16 class = dev->class >> 8;
-
-		if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) {
-			for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
-				dev->subordinate->resource[i] =
-						dev->bus->resource[i - 3];
-		}
-	}
-}
-
-static void
 get_current_resources(struct acpi_device *device, int busnum,
 			int domain, struct pci_bus *bus)
 {
@@ -158,8 +144,6 @@ get_current_resources(struct acpi_device *device, int busnum,
 	info.res_num = 0;
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
 				&info);
-	if (info.res_num)
-		adjust_transparent_bridge_resources(bus);
 
 	return;
 
@@ -222,8 +206,15 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 		 */
 		memcpy(bus->sysdata, sd, sizeof(*sd));
 		kfree(sd);
-	} else
-		bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
+	} else {
+		bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd);
+		if (bus) {
+			if (pci_probe & PCI_USE__CRS)
+				get_current_resources(device, busnum, domain,
+							bus);
+			bus->subordinate = pci_scan_child_bus(bus);
+		}
+	}
 
 	if (!bus)
 		kfree(sd);
@@ -238,8 +229,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 #endif
 	}
 
-	if (bus && (pci_probe & PCI_USE__CRS))
-		get_current_resources(device, busnum, domain, bus);
 	return bus;
 }
 
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index f893d6a6e80..3ffa10df20b 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -100,8 +100,9 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b)
 	int j;
 	struct pci_root_info *info;
 
-	/* don't go for it if _CRS is used */
-	if (pci_probe & PCI_USE__CRS)
+	/* don't go for it if _CRS is used already */
+	if (b->resource[0] != &ioport_resource ||
+	    b->resource[1] != &iomem_resource)
 		return;
 
 	/* if only one root bus, don't need to anything */
@@ -116,6 +117,9 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b)
 	if (i == pci_root_num)
 		return;
 
+	printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
+			b->number);
+
 	info = &pci_root_info[i];
 	for (j = 0; j < info->res_num; j++) {
 		struct resource *res;
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 0fb56db16d1..52e62e57fed 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -35,6 +35,7 @@
 #include <asm/pat.h>
 #include <asm/e820.h>
 #include <asm/pci_x86.h>
+#include <asm/io_apic.h>
 
 
 static int
@@ -227,6 +228,12 @@ void __init pcibios_resource_survey(void)
 	pcibios_allocate_resources(1);
 
 	e820_reserve_resources_late();
+	/*
+	 * Insert the IO APIC resources after PCI initialization has
+	 * occured to handle IO APICS that are mapped in on a BAR in
+	 * PCI space, but before trying to assign unassigned pci res.
+	 */
+	ioapic_insert_resources();
 }
 
 /**
diff --git a/arch/x86/power/Makefile b/arch/x86/power/Makefile
index de2abbd0754..a6a198c3362 100644
--- a/arch/x86/power/Makefile
+++ b/arch/x86/power/Makefile
@@ -1,7 +1,7 @@
 # __restore_processor_state() restores %gs after S3 resume and so should not
 # itself be stack-protected
 nostackp := $(call cc-option, -fno-stack-protector)
-CFLAGS_cpu_$(BITS).o	:= $(nostackp)
+CFLAGS_cpu.o	:= $(nostackp)
 
 obj-$(CONFIG_PM_SLEEP)		+= cpu.o
 obj-$(CONFIG_HIBERNATION)	+= hibernate_$(BITS).o hibernate_asm_$(BITS).o
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index d277ef1eea5..b3d20b9cac6 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -244,7 +244,7 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	do_fpu_end();
 	mtrr_ap_init();
 
-#ifdef CONFIG_X86_32
+#ifdef CONFIG_X86_OLD_MCE
 	mcheck_init(&boot_cpu_data);
 #endif
 }
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 172438f86a0..7410640db17 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -5,6 +5,10 @@ CFLAGS_REMOVE_time.o = -pg
 CFLAGS_REMOVE_irq.o = -pg
 endif
 
+# Make sure early boot has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_enlighten.o		:= $(nostackp)
+
 obj-y		:= enlighten.o setup.o multicalls.o mmu.o irq.o \
 			time.o xen-asm.o xen-asm_$(BITS).o \
 			grant-table.o suspend.o
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 0a1700a2be9..eb33aaa8415 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -215,6 +215,7 @@ static __init void xen_init_cpuid_mask(void)
 			  (1 << X86_FEATURE_ACPI));  /* disable ACPI */
 
 	ax = 1;
+	cx = 0;
 	xen_cpuid(&ax, &bx, &cx, &dx);
 
 	/* cpuid claims we support xsave; try enabling it to see what happens */
@@ -974,10 +975,6 @@ asmlinkage void __init xen_start_kernel(void)
 
 	xen_domain_type = XEN_PV_DOMAIN;
 
-	BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0);
-
-	xen_setup_features();
-
 	/* Install Xen paravirt ops */
 	pv_info = xen_info;
 	pv_init_ops = xen_init_ops;
@@ -986,8 +983,15 @@ asmlinkage void __init xen_start_kernel(void)
 	pv_apic_ops = xen_apic_ops;
 	pv_mmu_ops = xen_mmu_ops;
 
-	xen_init_irq_ops();
+#ifdef CONFIG_X86_64
+	/*
+	 * Setup percpu state.  We only need to do this for 64-bit
+	 * because 32-bit already has %fs set properly.
+	 */
+	load_percpu_segment(0);
+#endif
 
+	xen_init_irq_ops();
 	xen_init_cpuid_mask();
 
 #ifdef CONFIG_X86_LOCAL_APIC
@@ -997,6 +1001,8 @@ asmlinkage void __init xen_start_kernel(void)
 	set_xen_basic_apic_ops();
 #endif
 
+	xen_setup_features();
+
 	if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
 		pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
 		pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
@@ -1004,13 +1010,6 @@ asmlinkage void __init xen_start_kernel(void)
 
 	machine_ops = xen_machine_ops;
 
-#ifdef CONFIG_X86_64
-	/*
-	 * Setup percpu state.  We only need to do this for 64-bit
-	 * because 32-bit already has %fs set properly.
-	 */
-	load_percpu_segment(0);
-#endif
 	/*
 	 * The only reliable way to retain the initial address of the
 	 * percpu gdt_page is to remember it here, so we can go and
@@ -1061,6 +1060,7 @@ asmlinkage void __init xen_start_kernel(void)
 	/* set up basic CPUID stuff */
 	cpu_detect(&new_cpu_data);
 	new_cpu_data.hard_math = 1;
+	new_cpu_data.wp_works_ok = 1;
 	new_cpu_data.x86_capability[0] = cpuid_edx(1);
 #endif
 
diff --git a/arch/xtensa/include/asm/thread_info.h b/arch/xtensa/include/asm/thread_info.h
index 0f4fe1faf9b..13165641cc5 100644
--- a/arch/xtensa/include/asm/thread_info.h
+++ b/arch/xtensa/include/asm/thread_info.h
@@ -80,8 +80,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 
 #ifndef __ASSEMBLY__
@@ -92,7 +90,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/xtensa/include/asm/tlb.h b/arch/xtensa/include/asm/tlb.h
index 31c220faca0..0d766f9c108 100644
--- a/arch/xtensa/include/asm/tlb.h
+++ b/arch/xtensa/include/asm/tlb.h
@@ -42,6 +42,6 @@
 
 #include <asm-generic/tlb.h>
 
-#define __pte_free_tlb(tlb, pte)		pte_free((tlb)->mm, pte)
+#define __pte_free_tlb(tlb, pte, address)	pte_free((tlb)->mm, pte)
 
 #endif	/* _XTENSA_TLB_H */
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index ba9ab934978..e64efac3b9d 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -354,10 +354,10 @@ void show_regs(struct pt_regs * regs)
 
 	for (i = 0; i < 16; i++) {
 		if ((i % 8) == 0)
-			printk ("\n" KERN_INFO "a%02d: ", i);
-		printk("%08lx ", regs->areg[i]);
+			printk(KERN_INFO "a%02d:", i);
+		printk(KERN_CONT " %08lx", regs->areg[i]);
 	}
-	printk("\n");
+	printk(KERN_CONT "\n");
 
 	printk("pc: %08lx, ps: %08lx, depc: %08lx, excvaddr: %08lx\n",
 	       regs->pc, regs->ps, regs->depc, regs->excvaddr);
diff --git a/block/Kconfig b/block/Kconfig
index 95a86adc33a..9be0b56eaee 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -48,9 +48,9 @@ config LBDAF
 	  If unsure, say Y.
 
 config BLK_DEV_BSG
-	bool "Block layer SG support v4 (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	---help---
+	bool "Block layer SG support v4"
+	default y
+	help
 	  Saying Y here will enable generic SG (SCSI generic) v4 support
 	  for any block device.
 
@@ -60,7 +60,10 @@ config BLK_DEV_BSG
 	  protocols (e.g. Task Management Functions and SMP in Serial
 	  Attached SCSI).
 
-	  If unsure, say N.
+	  This option is required by recent UDEV versions to properly
+	  access device serial numbers, etc.
+
+	  If unsure, say Y.
 
 config BLK_DEV_INTEGRITY
 	bool "Block layer data integrity support"
diff --git a/block/Makefile b/block/Makefile
index e9fa4dd690f..6c54ed0ff75 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -5,7 +5,7 @@
 obj-$(CONFIG_BLOCK) := elevator.o blk-core.o blk-tag.o blk-sysfs.o \
 			blk-barrier.o blk-settings.o blk-ioc.o blk-map.o \
 			blk-exec.o blk-merge.o blk-softirq.o blk-timeout.o \
-			ioctl.o genhd.o scsi_ioctl.o cmd-filter.o
+			ioctl.o genhd.o scsi_ioctl.o
 
 obj-$(CONFIG_BLK_DEV_BSG)	+= bsg.o
 obj-$(CONFIG_IOSCHED_NOOP)	+= noop-iosched.o
diff --git a/block/blk-core.c b/block/blk-core.c
index b06cf5c2a82..e3299a77a0d 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -575,13 +575,6 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
 		return NULL;
 	}
 
-	/*
-	 * if caller didn't supply a lock, they get per-queue locking with
-	 * our embedded lock
-	 */
-	if (!lock)
-		lock = &q->__queue_lock;
-
 	q->request_fn		= rfn;
 	q->prep_rq_fn		= NULL;
 	q->unplug_fn		= generic_unplug_device;
@@ -595,8 +588,6 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
 
 	q->sg_reserved_size = INT_MAX;
 
-	blk_set_cmd_filter_defaults(&q->cmd_filter);
-
 	/*
 	 * all done
 	 */
@@ -1172,6 +1163,11 @@ static int __make_request(struct request_queue *q, struct bio *bio)
 	const int unplug = bio_unplug(bio);
 	int rw_flags;
 
+	if (bio_barrier(bio) && bio_has_data(bio) &&
+	    (q->next_ordered == QUEUE_ORDERED_NONE)) {
+		bio_endio(bio, -EOPNOTSUPP);
+		return 0;
+	}
 	/*
 	 * low level driver can indicate that it wants pages above a
 	 * certain limit bounced to low memory (ie for highmem, or even
@@ -1472,11 +1468,6 @@ static inline void __generic_make_request(struct bio *bio)
 			err = -EOPNOTSUPP;
 			goto end_io;
 		}
-		if (bio_barrier(bio) && bio_has_data(bio) &&
-		    (q->next_ordered == QUEUE_ORDERED_NONE)) {
-			err = -EOPNOTSUPP;
-			goto end_io;
-		}
 
 		ret = q->make_request_fn(q, bio);
 	} while (ret);
@@ -2145,7 +2136,7 @@ bool blk_end_request(struct request *rq, int error, unsigned int nr_bytes)
 {
 	return blk_end_bidi_request(rq, error, nr_bytes, 0);
 }
-EXPORT_SYMBOL_GPL(blk_end_request);
+EXPORT_SYMBOL(blk_end_request);
 
 /**
  * blk_end_request_all - Helper function for drives to finish the request.
@@ -2166,7 +2157,7 @@ void blk_end_request_all(struct request *rq, int error)
 	pending = blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
 	BUG_ON(pending);
 }
-EXPORT_SYMBOL_GPL(blk_end_request_all);
+EXPORT_SYMBOL(blk_end_request_all);
 
 /**
  * blk_end_request_cur - Helper function to finish the current request chunk.
@@ -2184,7 +2175,7 @@ bool blk_end_request_cur(struct request *rq, int error)
 {
 	return blk_end_request(rq, error, blk_rq_cur_bytes(rq));
 }
-EXPORT_SYMBOL_GPL(blk_end_request_cur);
+EXPORT_SYMBOL(blk_end_request_cur);
 
 /**
  * __blk_end_request - Helper function for drivers to complete the request.
@@ -2203,7 +2194,7 @@ bool __blk_end_request(struct request *rq, int error, unsigned int nr_bytes)
 {
 	return __blk_end_bidi_request(rq, error, nr_bytes, 0);
 }
-EXPORT_SYMBOL_GPL(__blk_end_request);
+EXPORT_SYMBOL(__blk_end_request);
 
 /**
  * __blk_end_request_all - Helper function for drives to finish the request.
@@ -2224,7 +2215,7 @@ void __blk_end_request_all(struct request *rq, int error)
 	pending = __blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
 	BUG_ON(pending);
 }
-EXPORT_SYMBOL_GPL(__blk_end_request_all);
+EXPORT_SYMBOL(__blk_end_request_all);
 
 /**
  * __blk_end_request_cur - Helper function to finish the current request chunk.
@@ -2243,7 +2234,7 @@ bool __blk_end_request_cur(struct request *rq, int error)
 {
 	return __blk_end_request(rq, error, blk_rq_cur_bytes(rq));
 }
-EXPORT_SYMBOL_GPL(__blk_end_request_cur);
+EXPORT_SYMBOL(__blk_end_request_cur);
 
 void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
 		     struct bio *bio)
@@ -2365,7 +2356,7 @@ int blk_rq_prep_clone(struct request *rq, struct request *rq_src,
 		__bio_clone(bio, bio_src);
 
 		if (bio_integrity(bio_src) &&
-		    bio_integrity_clone(bio, bio_src, gfp_mask))
+		    bio_integrity_clone(bio, bio_src, gfp_mask, bs))
 			goto free_and_out;
 
 		if (bio_ctr && bio_ctr(bio, bio_src, data))
diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index 73e28d35568..15c630813b1 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -379,6 +379,7 @@ void blk_integrity_unregister(struct gendisk *disk)
 
 	kobject_uevent(&bi->kobj, KOBJ_REMOVE);
 	kobject_del(&bi->kobj);
+	kobject_put(&bi->kobj);
 	kmem_cache_free(integrity_cachep, bi);
 	disk->integrity = NULL;
 }
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 39ce64432ba..e1999679a4d 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -350,6 +350,12 @@ static int attempt_merge(struct request_queue *q, struct request *req,
 	if (blk_integrity_rq(req) != blk_integrity_rq(next))
 		return 0;
 
+	/* don't merge requests of different failfast settings */
+	if (blk_failfast_dev(req)	!= blk_failfast_dev(next)	||
+	    blk_failfast_transport(req)	!= blk_failfast_transport(next)	||
+	    blk_failfast_driver(req)	!= blk_failfast_driver(next))
+		return 0;
+
 	/*
 	 * If we are allowed to merge, then append bio list
 	 * from next to rq and release next. merge_requests_fn
diff --git a/block/blk-settings.c b/block/blk-settings.c
index bd582a7f531..476d8706507 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -7,6 +7,7 @@
 #include <linux/bio.h>
 #include <linux/blkdev.h>
 #include <linux/bootmem.h>	/* for max_pfn/max_low_pfn */
+#include <linux/gcd.h>
 
 #include "blk.h"
 
@@ -165,6 +166,13 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
 	blk_set_default_limits(&q->limits);
 
 	/*
+	 * If the caller didn't supply a lock, fall back to our embedded
+	 * per-queue locks
+	 */
+	if (!q->queue_lock)
+		q->queue_lock = &q->__queue_lock;
+
+	/*
 	 * by default assume old behaviour and bounce for any highmem page
 	 */
 	blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
@@ -377,8 +385,8 @@ void blk_queue_alignment_offset(struct request_queue *q, unsigned int offset)
 EXPORT_SYMBOL(blk_queue_alignment_offset);
 
 /**
- * blk_queue_io_min - set minimum request size for the queue
- * @q:	the request queue for the device
+ * blk_limits_io_min - set minimum request size for a device
+ * @limits: the queue limits
  * @min:  smallest I/O size in bytes
  *
  * Description:
@@ -387,15 +395,35 @@ EXPORT_SYMBOL(blk_queue_alignment_offset);
  *   smallest I/O the device can perform without incurring a performance
  *   penalty.
  */
-void blk_queue_io_min(struct request_queue *q, unsigned int min)
+void blk_limits_io_min(struct queue_limits *limits, unsigned int min)
 {
-	q->limits.io_min = min;
+	limits->io_min = min;
 
-	if (q->limits.io_min < q->limits.logical_block_size)
-		q->limits.io_min = q->limits.logical_block_size;
+	if (limits->io_min < limits->logical_block_size)
+		limits->io_min = limits->logical_block_size;
 
-	if (q->limits.io_min < q->limits.physical_block_size)
-		q->limits.io_min = q->limits.physical_block_size;
+	if (limits->io_min < limits->physical_block_size)
+		limits->io_min = limits->physical_block_size;
+}
+EXPORT_SYMBOL(blk_limits_io_min);
+
+/**
+ * blk_queue_io_min - set minimum request size for the queue
+ * @q:	the request queue for the device
+ * @min:  smallest I/O size in bytes
+ *
+ * Description:
+ *   Storage devices may report a granularity or preferred minimum I/O
+ *   size which is the smallest request the device can perform without
+ *   incurring a performance penalty.  For disk drives this is often the
+ *   physical block size.  For RAID arrays it is often the stripe chunk
+ *   size.  A properly aligned multiple of minimum_io_size is the
+ *   preferred request size for workloads where a high number of I/O
+ *   operations is desired.
+ */
+void blk_queue_io_min(struct request_queue *q, unsigned int min)
+{
+	blk_limits_io_min(&q->limits, min);
 }
 EXPORT_SYMBOL(blk_queue_io_min);
 
@@ -405,8 +433,12 @@ EXPORT_SYMBOL(blk_queue_io_min);
  * @opt:  optimal request size in bytes
  *
  * Description:
- *   Drivers can call this function to set the preferred I/O request
- *   size for devices that report such a value.
+ *   Storage devices may report an optimal I/O size, which is the
+ *   device's preferred unit for sustained I/O.  This is rarely reported
+ *   for disk drives.  For RAID arrays it is usually the stripe width or
+ *   the internal track size.  A properly aligned multiple of
+ *   optimal_io_size is the preferred request size for workloads where
+ *   sustained throughput is desired.
  */
 void blk_queue_io_opt(struct request_queue *q, unsigned int opt)
 {
@@ -426,27 +458,7 @@ EXPORT_SYMBOL(blk_queue_io_opt);
  **/
 void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b)
 {
-	/* zero is "infinity" */
-	t->limits.max_sectors = min_not_zero(queue_max_sectors(t),
-					     queue_max_sectors(b));
-
-	t->limits.max_hw_sectors = min_not_zero(queue_max_hw_sectors(t),
-						queue_max_hw_sectors(b));
-
-	t->limits.seg_boundary_mask = min_not_zero(queue_segment_boundary(t),
-						   queue_segment_boundary(b));
-
-	t->limits.max_phys_segments = min_not_zero(queue_max_phys_segments(t),
-						   queue_max_phys_segments(b));
-
-	t->limits.max_hw_segments = min_not_zero(queue_max_hw_segments(t),
-						 queue_max_hw_segments(b));
-
-	t->limits.max_segment_size = min_not_zero(queue_max_segment_size(t),
-						  queue_max_segment_size(b));
-
-	t->limits.logical_block_size = max(queue_logical_block_size(t),
-					   queue_logical_block_size(b));
+	blk_stack_limits(&t->limits, &b->limits, 0);
 
 	if (!t->queue_lock)
 		WARN_ON_ONCE(1);
@@ -516,6 +528,16 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 		return -1;
 	}
 
+	/* Find lcm() of optimal I/O size */
+	if (t->io_opt && b->io_opt)
+		t->io_opt = (t->io_opt * b->io_opt) / gcd(t->io_opt, b->io_opt);
+	else if (b->io_opt)
+		t->io_opt = b->io_opt;
+
+	/* Verify that optimal I/O size is a multiple of io_min */
+	if (t->io_min && t->io_opt % t->io_min)
+		return -1;
+
 	return 0;
 }
 EXPORT_SYMBOL(blk_stack_limits);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index b1cd04087d6..d3aa2aadb3e 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -16,9 +16,9 @@ struct queue_sysfs_entry {
 };
 
 static ssize_t
-queue_var_show(unsigned int var, char *page)
+queue_var_show(unsigned long var, char *page)
 {
-	return sprintf(page, "%d\n", var);
+	return sprintf(page, "%lu\n", var);
 }
 
 static ssize_t
@@ -77,7 +77,8 @@ queue_requests_store(struct request_queue *q, const char *page, size_t count)
 
 static ssize_t queue_ra_show(struct request_queue *q, char *page)
 {
-	int ra_kb = q->backing_dev_info.ra_pages << (PAGE_CACHE_SHIFT - 10);
+	unsigned long ra_kb = q->backing_dev_info.ra_pages <<
+					(PAGE_CACHE_SHIFT - 10);
 
 	return queue_var_show(ra_kb, (page));
 }
@@ -132,7 +133,7 @@ queue_max_sectors_store(struct request_queue *q, const char *page, size_t count)
 		return -EINVAL;
 
 	spin_lock_irq(q->queue_lock);
-	blk_queue_max_sectors(q, max_sectors_kb << 1);
+	q->limits.max_sectors = max_sectors_kb << 1;
 	spin_unlock_irq(q->queue_lock);
 
 	return ret;
@@ -189,9 +190,9 @@ static ssize_t queue_nomerges_store(struct request_queue *q, const char *page,
 
 static ssize_t queue_rq_affinity_show(struct request_queue *q, char *page)
 {
-	unsigned int set = test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags);
+	bool set = test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags);
 
-	return queue_var_show(set != 0, page);
+	return queue_var_show(set, page);
 }
 
 static ssize_t
diff --git a/block/bsg.c b/block/bsg.c
index e7d47525424..5f184bb3ff9 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -186,7 +186,7 @@ static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
 		return -EFAULT;
 
 	if (hdr->subprotocol == BSG_SUB_PROTOCOL_SCSI_CMD) {
-		if (blk_verify_command(&q->cmd_filter, rq->cmd, has_write_perm))
+		if (blk_verify_command(rq->cmd, has_write_perm))
 			return -EPERM;
 	} else if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 833ec18eaa6..fd7080ed793 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -71,6 +71,51 @@ struct cfq_rb_root {
 #define CFQ_RB_ROOT	(struct cfq_rb_root) { RB_ROOT, NULL, }
 
 /*
+ * Per process-grouping structure
+ */
+struct cfq_queue {
+	/* reference count */
+	atomic_t ref;
+	/* various state flags, see below */
+	unsigned int flags;
+	/* parent cfq_data */
+	struct cfq_data *cfqd;
+	/* service_tree member */
+	struct rb_node rb_node;
+	/* service_tree key */
+	unsigned long rb_key;
+	/* prio tree member */
+	struct rb_node p_node;
+	/* prio tree root we belong to, if any */
+	struct rb_root *p_root;
+	/* sorted list of pending requests */
+	struct rb_root sort_list;
+	/* if fifo isn't expired, next request to serve */
+	struct request *next_rq;
+	/* requests queued in sort_list */
+	int queued[2];
+	/* currently allocated requests */
+	int allocated[2];
+	/* fifo list of requests in sort_list */
+	struct list_head fifo;
+
+	unsigned long slice_end;
+	long slice_resid;
+	unsigned int slice_dispatch;
+
+	/* pending metadata requests */
+	int meta_pending;
+	/* number of requests that are on the dispatch list or inside driver */
+	int dispatched;
+
+	/* io prio of this group */
+	unsigned short ioprio, org_ioprio;
+	unsigned short ioprio_class, org_ioprio_class;
+
+	pid_t pid;
+};
+
+/*
  * Per block device queue structure
  */
 struct cfq_data {
@@ -135,51 +180,11 @@ struct cfq_data {
 	unsigned int cfq_slice_idle;
 
 	struct list_head cic_list;
-};
 
-/*
- * Per process-grouping structure
- */
-struct cfq_queue {
-	/* reference count */
-	atomic_t ref;
-	/* various state flags, see below */
-	unsigned int flags;
-	/* parent cfq_data */
-	struct cfq_data *cfqd;
-	/* service_tree member */
-	struct rb_node rb_node;
-	/* service_tree key */
-	unsigned long rb_key;
-	/* prio tree member */
-	struct rb_node p_node;
-	/* prio tree root we belong to, if any */
-	struct rb_root *p_root;
-	/* sorted list of pending requests */
-	struct rb_root sort_list;
-	/* if fifo isn't expired, next request to serve */
-	struct request *next_rq;
-	/* requests queued in sort_list */
-	int queued[2];
-	/* currently allocated requests */
-	int allocated[2];
-	/* fifo list of requests in sort_list */
-	struct list_head fifo;
-
-	unsigned long slice_end;
-	long slice_resid;
-	unsigned int slice_dispatch;
-
-	/* pending metadata requests */
-	int meta_pending;
-	/* number of requests that are on the dispatch list or inside driver */
-	int dispatched;
-
-	/* io prio of this group */
-	unsigned short ioprio, org_ioprio;
-	unsigned short ioprio_class, org_ioprio_class;
-
-	pid_t pid;
+	/*
+	 * Fallback dummy cfqq for extreme OOM conditions
+	 */
+	struct cfq_queue oom_cfqq;
 };
 
 enum cfqq_state_flags {
@@ -1641,6 +1646,26 @@ static void cfq_ioc_set_ioprio(struct io_context *ioc)
 	ioc->ioprio_changed = 0;
 }
 
+static void cfq_init_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+			  pid_t pid, int is_sync)
+{
+	RB_CLEAR_NODE(&cfqq->rb_node);
+	RB_CLEAR_NODE(&cfqq->p_node);
+	INIT_LIST_HEAD(&cfqq->fifo);
+
+	atomic_set(&cfqq->ref, 0);
+	cfqq->cfqd = cfqd;
+
+	cfq_mark_cfqq_prio_changed(cfqq);
+
+	if (is_sync) {
+		if (!cfq_class_idle(cfqq))
+			cfq_mark_cfqq_idle_window(cfqq);
+		cfq_mark_cfqq_sync(cfqq);
+	}
+	cfqq->pid = pid;
+}
+
 static struct cfq_queue *
 cfq_find_alloc_queue(struct cfq_data *cfqd, int is_sync,
 		     struct io_context *ioc, gfp_t gfp_mask)
@@ -1653,56 +1678,40 @@ retry:
 	/* cic always exists here */
 	cfqq = cic_to_cfqq(cic, is_sync);
 
-	if (!cfqq) {
+	/*
+	 * Always try a new alloc if we fell back to the OOM cfqq
+	 * originally, since it should just be a temporary situation.
+	 */
+	if (!cfqq || cfqq == &cfqd->oom_cfqq) {
+		cfqq = NULL;
 		if (new_cfqq) {
 			cfqq = new_cfqq;
 			new_cfqq = NULL;
 		} else if (gfp_mask & __GFP_WAIT) {
-			/*
-			 * Inform the allocator of the fact that we will
-			 * just repeat this allocation if it fails, to allow
-			 * the allocator to do whatever it needs to attempt to
-			 * free memory.
-			 */
 			spin_unlock_irq(cfqd->queue->queue_lock);
 			new_cfqq = kmem_cache_alloc_node(cfq_pool,
-					gfp_mask | __GFP_NOFAIL | __GFP_ZERO,
+					gfp_mask | __GFP_ZERO,
 					cfqd->queue->node);
 			spin_lock_irq(cfqd->queue->queue_lock);
-			goto retry;
+			if (new_cfqq)
+				goto retry;
 		} else {
 			cfqq = kmem_cache_alloc_node(cfq_pool,
 					gfp_mask | __GFP_ZERO,
 					cfqd->queue->node);
-			if (!cfqq)
-				goto out;
 		}
 
-		RB_CLEAR_NODE(&cfqq->rb_node);
-		RB_CLEAR_NODE(&cfqq->p_node);
-		INIT_LIST_HEAD(&cfqq->fifo);
-
-		atomic_set(&cfqq->ref, 0);
-		cfqq->cfqd = cfqd;
-
-		cfq_mark_cfqq_prio_changed(cfqq);
-
-		cfq_init_prio_data(cfqq, ioc);
-
-		if (is_sync) {
-			if (!cfq_class_idle(cfqq))
-				cfq_mark_cfqq_idle_window(cfqq);
-			cfq_mark_cfqq_sync(cfqq);
-		}
-		cfqq->pid = current->pid;
-		cfq_log_cfqq(cfqd, cfqq, "alloced");
+		if (cfqq) {
+			cfq_init_cfqq(cfqd, cfqq, current->pid, is_sync);
+			cfq_init_prio_data(cfqq, ioc);
+			cfq_log_cfqq(cfqd, cfqq, "alloced");
+		} else
+			cfqq = &cfqd->oom_cfqq;
 	}
 
 	if (new_cfqq)
 		kmem_cache_free(cfq_pool, new_cfqq);
 
-out:
-	WARN_ON((gfp_mask & __GFP_WAIT) && !cfqq);
 	return cfqq;
 }
 
@@ -1735,11 +1744,8 @@ cfq_get_queue(struct cfq_data *cfqd, int is_sync, struct io_context *ioc,
 		cfqq = *async_cfqq;
 	}
 
-	if (!cfqq) {
+	if (!cfqq)
 		cfqq = cfq_find_alloc_queue(cfqd, is_sync, ioc, gfp_mask);
-		if (!cfqq)
-			return NULL;
-	}
 
 	/*
 	 * pin the queue now that it's allocated, scheduler exit will prune it
@@ -2305,12 +2311,8 @@ cfq_set_request(struct request_queue *q, struct request *rq, gfp_t gfp_mask)
 		goto queue_fail;
 
 	cfqq = cic_to_cfqq(cic, is_sync);
-	if (!cfqq) {
+	if (!cfqq || cfqq == &cfqd->oom_cfqq) {
 		cfqq = cfq_get_queue(cfqd, is_sync, cic->ioc, gfp_mask);
-
-		if (!cfqq)
-			goto queue_fail;
-
 		cic_set_cfqq(cic, cfqq, is_sync);
 	}
 
@@ -2465,6 +2467,14 @@ static void *cfq_init_queue(struct request_queue *q)
 	for (i = 0; i < CFQ_PRIO_LISTS; i++)
 		cfqd->prio_trees[i] = RB_ROOT;
 
+	/*
+	 * Our fallback cfqq if cfq_find_alloc_queue() runs into OOM issues.
+	 * Grab a permanent reference to it, so that the normal code flow
+	 * will not attempt to free it.
+	 */
+	cfq_init_cfqq(cfqd, &cfqd->oom_cfqq, 1, 0);
+	atomic_inc(&cfqd->oom_cfqq.ref);
+
 	INIT_LIST_HEAD(&cfqd->cic_list);
 
 	cfqd->queue = q;
diff --git a/block/cmd-filter.c b/block/cmd-filter.c
deleted file mode 100644
index 572bbc2f900..00000000000
--- a/block/cmd-filter.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * Copyright 2004 Peter M. Jones <pjones@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public Licens
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-
- *
- */
-
-#include <linux/list.h>
-#include <linux/genhd.h>
-#include <linux/spinlock.h>
-#include <linux/capability.h>
-#include <linux/bitops.h>
-#include <linux/blkdev.h>
-
-#include <scsi/scsi.h>
-#include <linux/cdrom.h>
-
-int blk_verify_command(struct blk_cmd_filter *filter,
-		       unsigned char *cmd, fmode_t has_write_perm)
-{
-	/* root can do any command. */
-	if (capable(CAP_SYS_RAWIO))
-		return 0;
-
-	/* if there's no filter set, assume we're filtering everything out */
-	if (!filter)
-		return -EPERM;
-
-	/* Anybody who can open the device can do a read-safe command */
-	if (test_bit(cmd[0], filter->read_ok))
-		return 0;
-
-	/* Write-safe commands require a writable open */
-	if (test_bit(cmd[0], filter->write_ok) && has_write_perm)
-		return 0;
-
-	return -EPERM;
-}
-EXPORT_SYMBOL(blk_verify_command);
-
-#if 0
-/* and now, the sysfs stuff */
-static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page,
-			     int rw)
-{
-	char *npage = page;
-	unsigned long *okbits;
-	int i;
-
-	if (rw == READ)
-		okbits = filter->read_ok;
-	else
-		okbits = filter->write_ok;
-
-	for (i = 0; i < BLK_SCSI_MAX_CMDS; i++) {
-		if (test_bit(i, okbits)) {
-			npage += sprintf(npage, "0x%02x", i);
-			if (i < BLK_SCSI_MAX_CMDS - 1)
-				sprintf(npage++, " ");
-		}
-	}
-
-	if (npage != page)
-		npage += sprintf(npage, "\n");
-
-	return npage - page;
-}
-
-static ssize_t rcf_readcmds_show(struct blk_cmd_filter *filter, char *page)
-{
-	return rcf_cmds_show(filter, page, READ);
-}
-
-static ssize_t rcf_writecmds_show(struct blk_cmd_filter *filter,
-				 char *page)
-{
-	return rcf_cmds_show(filter, page, WRITE);
-}
-
-static ssize_t rcf_cmds_store(struct blk_cmd_filter *filter,
-			      const char *page, size_t count, int rw)
-{
-	unsigned long okbits[BLK_SCSI_CMD_PER_LONG], *target_okbits;
-	int cmd, set;
-	char *p, *status;
-
-	if (rw == READ) {
-		memcpy(&okbits, filter->read_ok, sizeof(okbits));
-		target_okbits = filter->read_ok;
-	} else {
-		memcpy(&okbits, filter->write_ok, sizeof(okbits));
-		target_okbits = filter->write_ok;
-	}
-
-	while ((p = strsep((char **)&page, " ")) != NULL) {
-		set = 1;
-
-		if (p[0] == '+') {
-			p++;
-		} else if (p[0] == '-') {
-			set = 0;
-			p++;
-		}
-
-		cmd = simple_strtol(p, &status, 16);
-
-		/* either of these cases means invalid input, so do nothing. */
-		if ((status == p) || cmd >= BLK_SCSI_MAX_CMDS)
-			return -EINVAL;
-
-		if (set)
-			__set_bit(cmd, okbits);
-		else
-			__clear_bit(cmd, okbits);
-	}
-
-	memcpy(target_okbits, okbits, sizeof(okbits));
-	return count;
-}
-
-static ssize_t rcf_readcmds_store(struct blk_cmd_filter *filter,
-				  const char *page, size_t count)
-{
-	return rcf_cmds_store(filter, page, count, READ);
-}
-
-static ssize_t rcf_writecmds_store(struct blk_cmd_filter *filter,
-				   const char *page, size_t count)
-{
-	return rcf_cmds_store(filter, page, count, WRITE);
-}
-
-struct rcf_sysfs_entry {
-	struct attribute attr;
-	ssize_t (*show)(struct blk_cmd_filter *, char *);
-	ssize_t (*store)(struct blk_cmd_filter *, const char *, size_t);
-};
-
-static struct rcf_sysfs_entry rcf_readcmds_entry = {
-	.attr = { .name = "read_table", .mode = S_IRUGO | S_IWUSR },
-	.show = rcf_readcmds_show,
-	.store = rcf_readcmds_store,
-};
-
-static struct rcf_sysfs_entry rcf_writecmds_entry = {
-	.attr = {.name = "write_table", .mode = S_IRUGO | S_IWUSR },
-	.show = rcf_writecmds_show,
-	.store = rcf_writecmds_store,
-};
-
-static struct attribute *default_attrs[] = {
-	&rcf_readcmds_entry.attr,
-	&rcf_writecmds_entry.attr,
-	NULL,
-};
-
-#define to_rcf(atr) container_of((atr), struct rcf_sysfs_entry, attr)
-
-static ssize_t
-rcf_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
-{
-	struct rcf_sysfs_entry *entry = to_rcf(attr);
-	struct blk_cmd_filter *filter;
-
-	filter = container_of(kobj, struct blk_cmd_filter, kobj);
-	if (entry->show)
-		return entry->show(filter, page);
-
-	return 0;
-}
-
-static ssize_t
-rcf_attr_store(struct kobject *kobj, struct attribute *attr,
-			const char *page, size_t length)
-{
-	struct rcf_sysfs_entry *entry = to_rcf(attr);
-	struct blk_cmd_filter *filter;
-
-	if (!capable(CAP_SYS_RAWIO))
-		return -EPERM;
-
-	if (!entry->store)
-		return -EINVAL;
-
-	filter = container_of(kobj, struct blk_cmd_filter, kobj);
-	return entry->store(filter, page, length);
-}
-
-static struct sysfs_ops rcf_sysfs_ops = {
-	.show = rcf_attr_show,
-	.store = rcf_attr_store,
-};
-
-static struct kobj_type rcf_ktype = {
-	.sysfs_ops = &rcf_sysfs_ops,
-	.default_attrs = default_attrs,
-};
-
-int blk_register_filter(struct gendisk *disk)
-{
-	int ret;
-	struct blk_cmd_filter *filter = &disk->queue->cmd_filter;
-
-	ret = kobject_init_and_add(&filter->kobj, &rcf_ktype,
-				   &disk_to_dev(disk)->kobj,
-				   "%s", "cmd_filter");
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-EXPORT_SYMBOL(blk_register_filter);
-
-void blk_unregister_filter(struct gendisk *disk)
-{
-	struct blk_cmd_filter *filter = &disk->queue->cmd_filter;
-
-	kobject_put(&filter->kobj);
-}
-EXPORT_SYMBOL(blk_unregister_filter);
-#endif
diff --git a/block/elevator.c b/block/elevator.c
index ca861927ba4..2d511f9105e 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -100,6 +100,19 @@ int elv_rq_merge_ok(struct request *rq, struct bio *bio)
 	if (bio_integrity(bio) != blk_integrity_rq(rq))
 		return 0;
 
+	/*
+	 * Don't merge if failfast settings don't match.
+	 *
+	 * FIXME: The negation in front of each condition is necessary
+	 * because bio and request flags use different bit positions
+	 * and the accessors return those bits directly.  This
+	 * ugliness will soon go away.
+	 */
+	if (!bio_failfast_dev(bio)	 != !blk_failfast_dev(rq)	||
+	    !bio_failfast_transport(bio) != !blk_failfast_transport(rq)	||
+	    !bio_failfast_driver(bio)	 != !blk_failfast_driver(rq))
+		return 0;
+
 	if (!elv_iosched_allow_merge(rq, bio))
 		return 0;
 
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 5f8e798ede4..e5b10017a50 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -32,6 +32,11 @@
 #include <scsi/scsi_ioctl.h>
 #include <scsi/scsi_cmnd.h>
 
+struct blk_cmd_filter {
+	unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
+	unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
+} blk_default_cmd_filter;
+
 /* Command group 3 is reserved and should never be used.  */
 const unsigned char scsi_command_size_tbl[8] =
 {
@@ -105,7 +110,7 @@ static int sg_emulated_host(struct request_queue *q, int __user *p)
 	return put_user(1, p);
 }
 
-void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter)
+static void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter)
 {
 	/* Basic read-only commands */
 	__set_bit(TEST_UNIT_READY, filter->read_ok);
@@ -187,14 +192,37 @@ void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter)
 	__set_bit(GPCMD_SET_STREAMING, filter->write_ok);
 	__set_bit(GPCMD_SET_READ_AHEAD, filter->write_ok);
 }
-EXPORT_SYMBOL_GPL(blk_set_cmd_filter_defaults);
+
+int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm)
+{
+	struct blk_cmd_filter *filter = &blk_default_cmd_filter;
+
+	/* root can do any command. */
+	if (capable(CAP_SYS_RAWIO))
+		return 0;
+
+	/* if there's no filter set, assume we're filtering everything out */
+	if (!filter)
+		return -EPERM;
+
+	/* Anybody who can open the device can do a read-safe command */
+	if (test_bit(cmd[0], filter->read_ok))
+		return 0;
+
+	/* Write-safe commands require a writable open */
+	if (test_bit(cmd[0], filter->write_ok) && has_write_perm)
+		return 0;
+
+	return -EPERM;
+}
+EXPORT_SYMBOL(blk_verify_command);
 
 static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq,
 			     struct sg_io_hdr *hdr, fmode_t mode)
 {
 	if (copy_from_user(rq->cmd, hdr->cmdp, hdr->cmd_len))
 		return -EFAULT;
-	if (blk_verify_command(&q->cmd_filter, rq->cmd, mode & FMODE_WRITE))
+	if (blk_verify_command(rq->cmd, mode & FMODE_WRITE))
 		return -EPERM;
 
 	/*
@@ -427,7 +455,7 @@ int sg_scsi_ioctl(struct request_queue *q, struct gendisk *disk, fmode_t mode,
 	if (in_len && copy_from_user(buffer, sic->data + cmdlen, in_len))
 		goto error;
 
-	err = blk_verify_command(&q->cmd_filter, rq->cmd, mode & FMODE_WRITE);
+	err = blk_verify_command(rq->cmd, mode & FMODE_WRITE);
 	if (err)
 		goto error;
 
@@ -645,5 +673,11 @@ int scsi_cmd_ioctl(struct request_queue *q, struct gendisk *bd_disk, fmode_t mod
 	blk_put_queue(q);
 	return err;
 }
-
 EXPORT_SYMBOL(scsi_cmd_ioctl);
+
+int __init blk_scsi_ioctl_init(void)
+{
+	blk_set_cmd_filter_defaults(&blk_default_cmd_filter);
+	return 0;
+}
+fs_initcall(blk_scsi_ioctl_init);
diff --git a/crypto/algapi.c b/crypto/algapi.c
index 56c62e2858d..df0863d5699 100644
--- a/crypto/algapi.c
+++ b/crypto/algapi.c
@@ -692,7 +692,7 @@ out:
 }
 EXPORT_SYMBOL_GPL(crypto_enqueue_request);
 
-struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue)
+void *__crypto_dequeue_request(struct crypto_queue *queue, unsigned int offset)
 {
 	struct list_head *request;
 
@@ -707,7 +707,14 @@ struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue)
 	request = queue->list.next;
 	list_del(request);
 
-	return list_entry(request, struct crypto_async_request, list);
+	return (char *)list_entry(request, struct crypto_async_request, list) -
+	       offset;
+}
+EXPORT_SYMBOL_GPL(__crypto_dequeue_request);
+
+struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue)
+{
+	return __crypto_dequeue_request(queue, 0);
 }
 EXPORT_SYMBOL_GPL(crypto_dequeue_request);
 
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 95fe2c8d6c5..90dd3f8bd28 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -300,7 +300,7 @@ EXPORT_SYMBOL_GPL(async_xor_zero_sum);
 
 static int __init async_xor_init(void)
 {
-	#ifdef CONFIG_DMA_ENGINE
+	#ifdef CONFIG_ASYNC_TX_DMA
 	/* To conserve stack space the input src_list (array of page pointers)
 	 * is reused to hold the array of dma addresses passed to the driver.
 	 * This conversion is only possible when dma_addr_t is less than the
diff --git a/drivers/Makefile b/drivers/Makefile
index bc4205d2fc3..687db85412d 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -92,6 +92,7 @@ obj-$(CONFIG_CPU_IDLE)		+= cpuidle/
 obj-y				+= idle/
 obj-$(CONFIG_MMC)		+= mmc/
 obj-$(CONFIG_MEMSTICK)		+= memstick/
+obj-$(CONFIG_AR6000_WLAN)	+= ar6000/
 obj-$(CONFIG_NEW_LEDS)		+= leds/
 obj-$(CONFIG_INFINIBAND)	+= infiniband/
 obj-$(CONFIG_SGI_SN)		+= sn/
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 7a0f4aa4fa1..9a62224cc27 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -38,6 +38,9 @@
 
 #define _COMPONENT		ACPI_MEMORY_DEVICE_COMPONENT
 
+#undef PREFIX
+#define 	PREFIX		"ACPI:memory_hp:"
+
 ACPI_MODULE_NAME("acpi_memhotplug");
 MODULE_AUTHOR("Naveen B S <naveen.b.s@intel.com>");
 MODULE_DESCRIPTION("Hotplug Mem Driver");
@@ -153,6 +156,7 @@ acpi_memory_get_device(acpi_handle handle,
 	acpi_handle phandle;
 	struct acpi_device *device = NULL;
 	struct acpi_device *pdevice = NULL;
+	int result;
 
 
 	if (!acpi_bus_get_device(handle, &device) && device)
@@ -165,9 +169,9 @@ acpi_memory_get_device(acpi_handle handle,
 	}
 
 	/* Get the parent device */
-	status = acpi_bus_get_device(phandle, &pdevice);
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Cannot get acpi bus device"));
+	result = acpi_bus_get_device(phandle, &pdevice);
+	if (result) {
+		printk(KERN_WARNING PREFIX "Cannot get acpi bus device");
 		return -EINVAL;
 	}
 
@@ -175,9 +179,9 @@ acpi_memory_get_device(acpi_handle handle,
 	 * Now add the notified device.  This creates the acpi_device
 	 * and invokes .add function
 	 */
-	status = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Cannot add acpi bus"));
+	result = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
+	if (result) {
+		printk(KERN_WARNING PREFIX "Cannot add acpi bus");
 		return -EINVAL;
 	}
 
@@ -238,7 +242,12 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 			num_enabled++;
 			continue;
 		}
-
+		/*
+		 * If the memory block size is zero, please ignore it.
+		 * Don't try to do the following memory hotplug flowchart.
+		 */
+		if (!info->length)
+			continue;
 		if (node < 0)
 			node = memory_add_physaddr_to_nid(info->start_addr);
 
@@ -253,8 +262,15 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 		mem_device->state = MEMORY_INVALID_STATE;
 		return -EINVAL;
 	}
-
-	return result;
+	/*
+	 * Sometimes the memory device will contain several memory blocks.
+	 * When one memory block is hot-added to the system memory, it will
+	 * be regarded as a success.
+	 * Otherwise if the last memory block can't be hot-added to the system
+	 * memory, it will be failure and the memory device can't be bound with
+	 * driver.
+	 */
+	return 0;
 }
 
 static int acpi_memory_powerdown_device(struct acpi_memory_device *mem_device)
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index 544dcf83492..eb6f038b03d 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -97,6 +97,7 @@
 #define AOPOBJ_OBJECT_INITIALIZED   0x08
 #define AOPOBJ_SETUP_COMPLETE       0x10
 #define AOPOBJ_SINGLE_DATUM         0x20
+#define AOPOBJ_INVALID              0x40	/* Used if host OS won't allow an op_region address */
 
 /******************************************************************************
  *
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index 584d766e6f1..b79978f7bc7 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -397,6 +397,30 @@ acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc)
 	status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
 					   extra_desc->extra.aml_length,
 					   extra_desc->extra.aml_start);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Validate the region address/length via the host OS */
+
+	status = acpi_os_validate_address(obj_desc->region.space_id,
+					  obj_desc->region.address,
+					  (acpi_size) obj_desc->region.length,
+					  acpi_ut_get_node_name(node));
+
+	if (ACPI_FAILURE(status)) {
+		/*
+		 * Invalid address/length. We will emit an error message and mark
+		 * the region as invalid, so that it will cause an additional error if
+		 * it is ever used. Then return AE_OK.
+		 */
+		ACPI_EXCEPTION((AE_INFO, status,
+				"During address validation of OpRegion [%4.4s]",
+				node->name.ascii));
+		obj_desc->common.flags |= AOPOBJ_INVALID;
+		status = AE_OK;
+	}
+
 	return_ACPI_STATUS(status);
 }
 
diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c
index d4075b82102..6687be167f5 100644
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -113,6 +113,12 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc,
 		}
 	}
 
+	/* Exit if Address/Length have been disallowed by the host OS */
+
+	if (rgn_desc->common.flags & AOPOBJ_INVALID) {
+		return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
+	}
+
 	/*
 	 * Exit now for SMBus address space, it has a non-linear address space
 	 * and the request cannot be directly validated
diff --git a/drivers/acpi/acpica/exstorob.c b/drivers/acpi/acpica/exstorob.c
index 67340cc7014..257706e7734 100644
--- a/drivers/acpi/acpica/exstorob.c
+++ b/drivers/acpi/acpica/exstorob.c
@@ -70,6 +70,12 @@ acpi_ex_store_buffer_to_buffer(union acpi_operand_object *source_desc,
 
 	ACPI_FUNCTION_TRACE_PTR(ex_store_buffer_to_buffer, source_desc);
 
+	/* If Source and Target are the same, just return */
+
+	if (source_desc == target_desc) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
 	/* We know that source_desc is a buffer by now */
 
 	buffer = ACPI_CAST_PTR(u8, source_desc->buffer.pointer);
@@ -161,6 +167,12 @@ acpi_ex_store_string_to_string(union acpi_operand_object *source_desc,
 
 	ACPI_FUNCTION_TRACE_PTR(ex_store_string_to_string, source_desc);
 
+	/* If Source and Target are the same, just return */
+
+	if (source_desc == target_desc) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
 	/* We know that source_desc is a string by now */
 
 	buffer = ACPI_CAST_PTR(u8, source_desc->string.pointer);
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 71670719d61..5691f165a95 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -189,11 +189,36 @@ acpi_status __init acpi_os_initialize(void)
 	return AE_OK;
 }
 
+static void bind_to_cpu0(struct work_struct *work)
+{
+	set_cpus_allowed(current, cpumask_of_cpu(0));
+	kfree(work);
+}
+
+static void bind_workqueue(struct workqueue_struct *wq)
+{
+	struct work_struct *work;
+
+	work = kzalloc(sizeof(struct work_struct), GFP_KERNEL);
+	INIT_WORK(work, bind_to_cpu0);
+	queue_work(wq, work);
+}
+
 acpi_status acpi_os_initialize1(void)
 {
+	/*
+	 * On some machines, a software-initiated SMI causes corruption unless
+	 * the SMI runs on CPU 0.  An SMI can be initiated by any AML, but
+	 * typically it's done in GPE-related methods that are run via
+	 * workqueues, so we can avoid the known corruption cases by binding
+	 * the workqueues to CPU 0.
+	 */
 	kacpid_wq = create_singlethread_workqueue("kacpid");
+	bind_workqueue(kacpid_wq);
 	kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify");
+	bind_workqueue(kacpi_notify_wq);
 	kacpi_hotplug_wq = create_singlethread_workqueue("kacpi_hotplug");
+	bind_workqueue(kacpi_hotplug_wq);
 	BUG_ON(!kacpid_wq);
 	BUG_ON(!kacpi_notify_wq);
 	BUG_ON(!kacpi_hotplug_wq);
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 8a5bf3b356f..55b5b90c2a4 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -395,7 +395,7 @@ struct pci_dev *acpi_get_pci_dev(acpi_handle handle)
 		fn  = adr & 0xffff;
 
 		pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn));
-		if (hnd == handle)
+		if (!pdev || hnd == handle)
 			break;
 
 		pbus = pdev->subordinate;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 84e0f3c0744..2cc4b303387 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -1151,6 +1151,9 @@ static int __init acpi_processor_init(void)
 {
 	int result = 0;
 
+	if (acpi_disabled)
+		return 0;
+
 	memset(&errata, 0, sizeof(errata));
 
 #ifdef CONFIG_SMP
@@ -1197,6 +1200,9 @@ out_proc:
 
 static void __exit acpi_processor_exit(void)
 {
+	if (acpi_disabled)
+		return;
+
 	acpi_processor_ppc_exit();
 
 	acpi_thermal_cpufreq_exit();
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 0efa59e7e3a..66393d5c4c7 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -162,8 +162,9 @@ static void lapic_timer_check_state(int state, struct acpi_processor *pr,
 		pr->power.timer_broadcast_on_state = state;
 }
 
-static void lapic_timer_propagate_broadcast(struct acpi_processor *pr)
+static void lapic_timer_propagate_broadcast(void *arg)
 {
+	struct acpi_processor *pr = (struct acpi_processor *) arg;
 	unsigned long reason;
 
 	reason = pr->power.timer_broadcast_on_state < INT_MAX ?
@@ -635,7 +636,8 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 		working++;
 	}
 
-	lapic_timer_propagate_broadcast(pr);
+	smp_call_function_single(pr->id, lapic_timer_propagate_broadcast,
+				 pr, 1);
 
 	return (working);
 }
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index 39838c66603..31adda1099e 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -66,7 +66,7 @@ static int acpi_processor_apply_limit(struct acpi_processor *pr)
 		if (pr->limit.thermal.tx > tx)
 			tx = pr->limit.thermal.tx;
 
-		result = acpi_processor_set_throttling(pr, tx);
+		result = acpi_processor_set_throttling(pr, tx, false);
 		if (result)
 			goto end;
 	}
@@ -421,12 +421,12 @@ processor_set_cur_state(struct thermal_cooling_device *cdev,
 
 	if (state <= max_pstate) {
 		if (pr->flags.throttling && pr->throttling.state)
-			result = acpi_processor_set_throttling(pr, 0);
+			result = acpi_processor_set_throttling(pr, 0, false);
 		cpufreq_set_cur_state(pr->id, state);
 	} else {
 		cpufreq_set_cur_state(pr->id, max_pstate);
 		result = acpi_processor_set_throttling(pr,
-				state - max_pstate);
+				state - max_pstate, false);
 	}
 	return result;
 }
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 227543789ba..ae39797aab5 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -62,7 +62,8 @@ struct throttling_tstate {
 #define THROTTLING_POSTCHANGE      (2)
 
 static int acpi_processor_get_throttling(struct acpi_processor *pr);
-int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
+int acpi_processor_set_throttling(struct acpi_processor *pr,
+						int state, bool force);
 
 static int acpi_processor_update_tsd_coord(void)
 {
@@ -361,7 +362,7 @@ int acpi_processor_tstate_has_changed(struct acpi_processor *pr)
 		 */
 		target_state = throttling_limit;
 	}
-	return acpi_processor_set_throttling(pr, target_state);
+	return acpi_processor_set_throttling(pr, target_state, false);
 }
 
 /*
@@ -839,10 +840,10 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
 	if (ret >= 0) {
 		state = acpi_get_throttling_state(pr, value);
 		if (state == -1) {
-			ACPI_WARNING((AE_INFO,
-				"Invalid throttling state, reset"));
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				"Invalid throttling state, reset\n"));
 			state = 0;
-			ret = acpi_processor_set_throttling(pr, state);
+			ret = acpi_processor_set_throttling(pr, state, true);
 			if (ret)
 				return ret;
 		}
@@ -915,7 +916,7 @@ static int acpi_processor_get_fadt_info(struct acpi_processor *pr)
 }
 
 static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr,
-					      int state)
+					      int state, bool force)
 {
 	u32 value = 0;
 	u32 duty_mask = 0;
@@ -930,7 +931,7 @@ static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr,
 	if (!pr->flags.throttling)
 		return -ENODEV;
 
-	if (state == pr->throttling.state)
+	if (!force && (state == pr->throttling.state))
 		return 0;
 
 	if (state < pr->throttling_platform_limit)
@@ -988,7 +989,7 @@ static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr,
 }
 
 static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr,
-					     int state)
+					     int state, bool force)
 {
 	int ret;
 	acpi_integer value;
@@ -1002,7 +1003,7 @@ static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr,
 	if (!pr->flags.throttling)
 		return -ENODEV;
 
-	if (state == pr->throttling.state)
+	if (!force && (state == pr->throttling.state))
 		return 0;
 
 	if (state < pr->throttling_platform_limit)
@@ -1018,7 +1019,8 @@ static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr,
 	return 0;
 }
 
-int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
+int acpi_processor_set_throttling(struct acpi_processor *pr,
+						int state, bool force)
 {
 	cpumask_var_t saved_mask;
 	int ret = 0;
@@ -1070,7 +1072,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
 		/* FIXME: use work_on_cpu() */
 		set_cpus_allowed_ptr(current, cpumask_of(pr->id));
 		ret = p_throttling->acpi_processor_set_throttling(pr,
-						t_state.target_state);
+						t_state.target_state, force);
 	} else {
 		/*
 		 * When the T-state coordination is SW_ALL or HW_ALL,
@@ -1103,7 +1105,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
 			set_cpus_allowed_ptr(current, cpumask_of(i));
 			ret = match_pr->throttling.
 				acpi_processor_set_throttling(
-				match_pr, t_state.target_state);
+				match_pr, t_state.target_state, force);
 		}
 	}
 	/*
@@ -1201,7 +1203,7 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr)
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				  "Disabling throttling (was T%d)\n",
 				  pr->throttling.state));
-		result = acpi_processor_set_throttling(pr, 0);
+		result = acpi_processor_set_throttling(pr, 0, false);
 		if (result)
 			goto end;
 	}
@@ -1307,7 +1309,7 @@ static ssize_t acpi_processor_write_throttling(struct file *file,
 	if (strcmp(tmpbuf, charp) != 0)
 		return -EINVAL;
 
-	result = acpi_processor_set_throttling(pr, state_val);
+	result = acpi_processor_set_throttling(pr, state_val, false);
 	if (result)
 		return result;
 
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 01574a06653..42159a28f43 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -397,6 +397,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 		},
 	},
 	{
+	.callback = init_set_sci_en_on_resume,
+	.ident = "Hewlett-Packard HP G7000 Notebook PC",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP G7000 Notebook PC"),
+		},
+	},
+	{
 	.callback = init_old_suspend_ordering,
 	.ident = "Panasonic CF51-2L",
 	.matches = {
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index 0944daec064..9c61ab2177c 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -121,7 +121,7 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr,
 	table_attr->attr.size = 0;
 	table_attr->attr.read = acpi_table_show;
 	table_attr->attr.attr.name = table_attr->name;
-	table_attr->attr.attr.mode = 0444;
+	table_attr->attr.attr.mode = 0400;
 
 	return;
 }
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 8851315ce85..60ea984c84a 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -2004,8 +2004,11 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device)
 	status = acpi_remove_notify_handler(device->dev->handle,
 					    ACPI_DEVICE_NOTIFY,
 					    acpi_video_device_notify);
-	sysfs_remove_link(&device->backlight->dev.kobj, "device");
-	backlight_device_unregister(device->backlight);
+	if (device->backlight) {
+		sysfs_remove_link(&device->backlight->dev.kobj, "device");
+		backlight_device_unregister(device->backlight);
+		device->backlight = NULL;
+	}
 	if (device->cdev) {
 		sysfs_remove_link(&device->dev->dev.kobj,
 				  "thermal_cooling");
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 3d763fdf99b..24665067301 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -207,6 +207,16 @@ int amba_device_register(struct amba_device *dev, struct resource *parent)
 	void __iomem *tmp;
 	int i, ret;
 
+	device_initialize(&dev->dev);
+
+	/*
+	 * Copy from device_add
+	 */
+	if (dev->dev.init_name) {
+		dev_set_name(&dev->dev, "%s", dev->dev.init_name);
+		dev->dev.init_name = NULL;
+	}
+
 	dev->dev.release = amba_device_release;
 	dev->dev.bus = &amba_bustype;
 	dev->dev.dma_mask = &dev->dma_mask;
@@ -240,7 +250,7 @@ int amba_device_register(struct amba_device *dev, struct resource *parent)
 		goto err_release;
 	}
 
-	ret = device_register(&dev->dev);
+	ret = device_add(&dev->dev);
 	if (ret)
 		goto err_release;
 
diff --git a/drivers/ar6000/Kconfig b/drivers/ar6000/Kconfig
new file mode 100644
index 00000000000..a422cb0eef1
--- /dev/null
+++ b/drivers/ar6000/Kconfig
@@ -0,0 +1,31 @@
+config AR6000_WLAN
+        tristate "AR6000 wireless networking over SDIO"
+	depends on MMC
+        select WIRELESS_EXT
+        default m
+        help
+          good luck.
+
+config AR6000_WLAN_DEBUG
+	bool "Enable retrieval of firmware debugging information"
+	depends on AR6000_WLAN
+	default n
+	help
+	  The AR6k firmware maintains a log of debugging events that
+	  gets flushed to the host on various occasions. Retrieval of
+	  this data is very slow, taking several seconds.
+
+	  If in doubt, say N.
+
+config AR6000_WLAN_RESET
+	bool "Soft-reset when shutting down"
+	depends on AR6000_WLAN
+	default n
+	help
+	  The AR6k module can be explicitly reset when shutting down
+	  the device. This adds a delay of about two seconds to suspend,
+	  module removal, and so on. Since the WLAN SDIO function is
+	  generally disabled soon thereafter anyway, this reset seems
+	  superfluous.
+
+	  If in doubt, say N.
diff --git a/drivers/ar6000/Makefile b/drivers/ar6000/Makefile
new file mode 100644
index 00000000000..f8f443172ec
--- /dev/null
+++ b/drivers/ar6000/Makefile
@@ -0,0 +1,38 @@
+REV ?= 2
+
+PWD := $(shell pwd)
+
+EXTRA_CFLAGS += -I$(src)/include
+
+EXTRA_CFLAGS += -DLINUX -D__KERNEL__ -DHTC_RAW_INTERFACE\
+                -DTCMD -DUSER_KEYS \
+                -DNO_SYNC_FLUSH #\
+                -DMULTIPLE_FRAMES_PER_INTERRUPT -DAR6000REV$(REV) \
+                -DBLOCK_TX_PATH_FLAG \
+		-DSDIO \
+
+EXTRA_CFLAGS += -DKERNEL_2_6
+
+obj-$(CONFIG_AR6000_WLAN) += ar6000.o
+
+ar6000-objs += htc/ar6k.o      		   \
+	       htc/ar6k_events.o 	   \
+               htc/htc_send.o       	   \
+               htc/htc_recv.o       	   \
+               htc/htc_services.o          \
+               htc/htc.o     		   \
+               hif/hif2.o     		   \
+               bmi/bmi.o                   \
+               ar6000/ar6000_drv.o         \
+               ar6000/ar6000_raw_if.o	   \
+               ar6000/netbuf.o		   \
+               ar6000/wireless_ext.o	   \
+               ar6000/ioctl.o		   \
+               miscdrv/common_drv.o	   \
+               miscdrv/credit_dist.o	   \
+               wmi/wmi.o                   \
+               wlan/wlan_node.o            \
+               wlan/wlan_recv_beacon.o     \
+               wlan/wlan_utils.o
+
+
diff --git a/drivers/ar6000/ar6000/ar6000_drv.c b/drivers/ar6000/ar6000/ar6000_drv.c
new file mode 100644
index 00000000000..90533ab9610
--- /dev/null
+++ b/drivers/ar6000/ar6000/ar6000_drv.c
@@ -0,0 +1,3129 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/*
+ * This driver is a pseudo ethernet driver to access the Atheros AR6000
+ * WLAN Device
+ */
+static const char athId[] __attribute__ ((unused)) = "$Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/ar6000_drv.c#2 $";
+
+#include "ar6000_drv.h"
+#include "htc.h"
+
+MODULE_LICENSE("GPL and additional rights");
+
+#ifndef REORG_APTC_HEURISTICS
+#undef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+#endif /* REORG_APTC_HEURISTICS */
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+#define APTC_TRAFFIC_SAMPLING_INTERVAL     100  /* msec */
+#define APTC_UPPER_THROUGHPUT_THRESHOLD    3000 /* Kbps */
+#define APTC_LOWER_THROUGHPUT_THRESHOLD    2000 /* Kbps */
+
+typedef struct aptc_traffic_record {
+    A_BOOL timerScheduled;
+    struct timeval samplingTS;
+    unsigned long bytesReceived;
+    unsigned long bytesTransmitted;
+} APTC_TRAFFIC_RECORD;
+
+A_TIMER aptcTimer;
+APTC_TRAFFIC_RECORD aptcTR;
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+unsigned int bypasswmi = 0;
+unsigned int debuglevel = 0;
+int tspecCompliance = 1;
+unsigned int busspeedlow = 0;
+unsigned int onebitmode = 0;
+unsigned int skipflash = 0;
+unsigned int wmitimeout = 2;
+unsigned int wlanNodeCaching = 1;
+unsigned int enableuartprint = 0;
+unsigned int logWmiRawMsgs = 0;
+unsigned int enabletimerwar = 0;
+unsigned int mbox_yield_limit = 99;
+int reduce_credit_dribble = 1 + HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF;
+int allow_trace_signal = 0;
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+unsigned int testmode =0;
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+module_param(bypasswmi, int, 0644);
+module_param(debuglevel, int, 0644);
+module_param(tspecCompliance, int, 0644);
+module_param(onebitmode, int, 0644);
+module_param(busspeedlow, int, 0644);
+module_param(skipflash, int, 0644);
+module_param(wmitimeout, int, 0644);
+module_param(wlanNodeCaching, int, 0644);
+module_param(logWmiRawMsgs, int, 0644);
+module_param(enableuartprint, int, 0644);
+module_param(enabletimerwar, int, 0644);
+module_param(mbox_yield_limit, int, 0644);
+module_param(reduce_credit_dribble, int, 0644);
+module_param(allow_trace_signal, int, 0644);
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+module_param(testmode, int, 0644);
+#endif
+#else
+
+#define __user
+/* for linux 2.4 and lower */
+MODULE_PARM(bypasswmi,"i");
+MODULE_PARM(debuglevel, "i");
+MODULE_PARM(onebitmode,"i");
+MODULE_PARM(busspeedlow, "i");
+MODULE_PARM(skipflash, "i");
+MODULE_PARM(wmitimeout, "i");
+MODULE_PARM(wlanNodeCaching, "i");
+MODULE_PARM(enableuartprint,"i");
+MODULE_PARM(logWmiRawMsgs, "i");
+MODULE_PARM(enabletimerwar,"i");
+MODULE_PARM(mbox_yield_limit,"i");
+MODULE_PARM(reduce_credit_dribble,"i");
+MODULE_PARM(allow_trace_signal,"i");
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+MODULE_PARM(testmode, "i");
+#endif
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+/* in 2.6.10 and later this is now a pointer to a uint */
+unsigned int _mboxnum = HTC_MAILBOX_NUM_MAX;
+#define mboxnum &_mboxnum
+#else
+unsigned int mboxnum = HTC_MAILBOX_NUM_MAX;
+#endif
+
+#ifdef CONFIG_AR6000_WLAN_RESET
+unsigned int resetok = 1;
+#else
+unsigned int resetok = 0;
+#endif
+
+#ifdef DEBUG
+A_UINT32 g_dbg_flags = DBG_DEFAULTS;
+unsigned int debugflags = 0;
+int debugdriver = 1;
+unsigned int debughtc = 128;
+unsigned int debugbmi = 1;
+unsigned int debughif = 2;
+unsigned int txcreditsavailable[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int txcreditsconsumed[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int txcreditintrenable[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int txcreditintrenableaggregate[HTC_MAILBOX_NUM_MAX] = {0};
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+module_param(debugflags, int, 0644);
+module_param(debugdriver, int, 0644);
+module_param(debughtc, int, 0644);
+module_param(debugbmi, int, 0644);
+module_param(debughif, int, 0644);
+module_param(resetok, int, 0644);
+module_param_array(txcreditsavailable, int, mboxnum, 0644);
+module_param_array(txcreditsconsumed, int, mboxnum, 0644);
+module_param_array(txcreditintrenable, int, mboxnum, 0644);
+module_param_array(txcreditintrenableaggregate, int, mboxnum, 0644);
+#else
+/* linux 2.4 and lower */
+MODULE_PARM(debugflags,"i");
+MODULE_PARM(debugdriver, "i");
+MODULE_PARM(debughtc, "i");
+MODULE_PARM(debugbmi, "i");
+MODULE_PARM(debughif, "i");
+MODULE_PARM(resetok, "i");
+MODULE_PARM(txcreditsavailable, "0-3i");
+MODULE_PARM(txcreditsconsumed, "0-3i");
+MODULE_PARM(txcreditintrenable, "0-3i");
+MODULE_PARM(txcreditintrenableaggregate, "0-3i");
+#endif
+
+#endif /* DEBUG */
+
+unsigned int tx_attempt[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int tx_post[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int tx_complete[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int hifBusRequestNumMax = 40;
+unsigned int war23838_disabled = 0;
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+unsigned int enableAPTCHeuristics = 1;
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+module_param_array(tx_attempt, int, mboxnum, 0644);
+module_param_array(tx_post, int, mboxnum, 0644);
+module_param_array(tx_complete, int, mboxnum, 0644);
+module_param(hifBusRequestNumMax, int, 0644);
+module_param(war23838_disabled, int, 0644);
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+module_param(enableAPTCHeuristics, int, 0644);
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+#else
+MODULE_PARM(tx_attempt, "0-3i");
+MODULE_PARM(tx_post, "0-3i");
+MODULE_PARM(tx_complete, "0-3i");
+MODULE_PARM(hifBusRequestNumMax, "i");
+MODULE_PARM(war23838_disabled, "i");
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+MODULE_PARM(enableAPTCHeuristics, "i");
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+#endif
+
+#ifdef BLOCK_TX_PATH_FLAG
+int blocktx = 0;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+module_param(blocktx, int, 0644);
+#else
+MODULE_PARM(blocktx, "i");
+#endif
+#endif /* BLOCK_TX_PATH_FLAG */
+
+// TODO move to arsoft_c
+USER_RSSI_THOLD rssi_map[12];
+
+int reconnect_flag = 0;
+
+DECLARE_WAIT_QUEUE_HEAD(ar6000_scan_queue);
+
+/* Function declarations */
+static int ar6000_init_module(void);
+static void ar6000_cleanup_module(void);
+
+int ar6000_init(struct net_device *dev);
+static int ar6000_open(struct net_device *dev);
+static int ar6000_close(struct net_device *dev);
+static int ar6000_cleanup(struct net_device *dev);
+static void ar6000_init_control_info(AR_SOFTC_T *ar);
+static int ar6000_data_tx(struct sk_buff *skb, struct net_device *dev);
+
+static void ar6000_destroy(struct net_device *dev, unsigned int unregister);
+static void ar6000_detect_error(unsigned long ptr);
+static struct net_device_stats *ar6000_get_stats(struct net_device *dev);
+static struct iw_statistics *ar6000_get_iwstats(struct net_device * dev);
+
+/*
+ * HTC service connection handlers
+ */
+static void ar6000_avail_ev(HTC_HANDLE HTCHandle);
+
+static void ar6000_unavail_ev(void *Instance);
+
+static void ar6000_target_failure(void *Instance, A_STATUS Status);
+
+static void ar6000_rx(void *Context, HTC_PACKET *pPacket);
+
+static void ar6000_rx_refill(void *Context,HTC_ENDPOINT_ID Endpoint);
+
+static void ar6000_tx_complete(void *Context, HTC_PACKET *pPacket);
+
+static void ar6000_tx_queue_full(void *Context, HTC_ENDPOINT_ID Endpoint);
+
+static void ar6000_tx_queue_avail(void *Context, HTC_ENDPOINT_ID Endpoint);
+
+/*
+ * Static variables
+ */
+
+static struct net_device *ar6000_devices[MAX_AR6000];
+extern struct iw_handler_def ath_iw_handler_def;
+DECLARE_WAIT_QUEUE_HEAD(arEvent);
+static void ar6000_cookie_init(AR_SOFTC_T *ar);
+static void ar6000_cookie_cleanup(AR_SOFTC_T *ar);
+static void ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie);
+static struct ar_cookie *ar6000_alloc_cookie(AR_SOFTC_T *ar);
+static void ar6000_TxDataCleanup(AR_SOFTC_T *ar);
+
+#ifdef USER_KEYS
+static A_STATUS ar6000_reinstall_keys(AR_SOFTC_T *ar,A_UINT8 key_op_ctrl);
+#endif
+
+
+static struct ar_cookie s_ar_cookie_mem[MAX_COOKIE_NUM];
+
+#define HOST_INTEREST_ITEM_ADDRESS(ar, item)    \
+((ar->arTargetType == TARGET_TYPE_AR6001) ?     \
+   AR6001_HOST_INTEREST_ITEM_ADDRESS(item) :    \
+   AR6002_HOST_INTEREST_ITEM_ADDRESS(item))
+
+
+/* Debug log support */
+
+/*
+ * Flag to govern whether the debug logs should be parsed in the kernel
+ * or reported to the application.
+ */
+#ifdef DEBUG
+#define REPORT_DEBUG_LOGS_TO_APP
+#endif
+
+A_STATUS
+ar6000_set_host_app_area(AR_SOFTC_T *ar)
+{
+    A_UINT32 address, data;
+    struct host_app_area_s host_app_area;
+
+    /* Fetch the address of the host_app_area_s instance in the host interest area */
+    address = HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest);
+    if (ar6000_ReadRegDiag(ar->arHifDevice, &address, &data) != A_OK) {
+        return A_ERROR;
+    }
+    address = data;
+    host_app_area.wmi_protocol_ver = WMI_PROTOCOL_VERSION;
+    if (ar6000_WriteDataDiag(ar->arHifDevice, address,
+                             (A_UCHAR *)&host_app_area,
+                             sizeof(struct host_app_area_s)) != A_OK)
+    {
+        return A_ERROR;
+    }
+
+    return A_OK;
+}
+
+A_UINT32
+dbglog_get_debug_hdr_ptr(AR_SOFTC_T *ar)
+{
+    A_UINT32 param;
+    A_UINT32 address;
+    A_STATUS status;
+
+    address = HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbglog_hdr);
+    if ((status = ar6000_ReadDataDiag(ar->arHifDevice, address,
+                                      (A_UCHAR *)&param, 4)) != A_OK)
+    {
+        param = 0;
+    }
+
+    return param;
+}
+
+/*
+ * The dbglog module has been initialized. Its ok to access the relevant
+ * data stuctures over the diagnostic window.
+ */
+void
+ar6000_dbglog_init_done(AR_SOFTC_T *ar)
+{
+    ar->dbglog_init_done = TRUE;
+}
+
+A_UINT32
+dbglog_get_debug_fragment(A_INT8 *datap, A_UINT32 len, A_UINT32 limit)
+{
+    A_INT32 *buffer;
+    A_UINT32 count;
+    A_UINT32 numargs;
+    A_UINT32 length;
+    A_UINT32 fraglen;
+
+    count = fraglen = 0;
+    buffer = (A_INT32 *)datap;
+    length = (limit >> 2);
+
+    if (len <= limit) {
+        fraglen = len;
+    } else {
+        while (count < length) {
+            numargs = DBGLOG_GET_NUMARGS(buffer[count]);
+            fraglen = (count << 2);
+            count += numargs + 1;
+        }
+    }
+
+    return fraglen;
+}
+
+void
+dbglog_parse_debug_logs(A_INT8 *datap, A_UINT32 len)
+{
+    A_INT32 *buffer;
+    A_UINT32 count;
+    A_UINT32 timestamp;
+    A_UINT32 debugid;
+    A_UINT32 moduleid;
+    A_UINT32 numargs;
+    A_UINT32 length;
+
+    count = 0;
+    buffer = (A_INT32 *)datap;
+    length = (len >> 2);
+    while (count < length) {
+        debugid = DBGLOG_GET_DBGID(buffer[count]);
+        moduleid = DBGLOG_GET_MODULEID(buffer[count]);
+        numargs = DBGLOG_GET_NUMARGS(buffer[count]);
+        timestamp = DBGLOG_GET_TIMESTAMP(buffer[count]);
+        switch (numargs) {
+            case 0:
+            AR_DEBUG_PRINTF("%d %d (%d)\n", moduleid, debugid, timestamp);
+            break;
+
+            case 1:
+            AR_DEBUG_PRINTF("%d %d (%d): 0x%x\n", moduleid, debugid,
+                            timestamp, buffer[count+1]);
+            break;
+
+            case 2:
+            AR_DEBUG_PRINTF("%d %d (%d): 0x%x, 0x%x\n", moduleid, debugid,
+                            timestamp, buffer[count+1], buffer[count+2]);
+            break;
+
+            default:
+            AR_DEBUG_PRINTF("Invalid args: %d\n", numargs);
+        }
+        count += numargs + 1;
+    }
+}
+
+int
+ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar)
+{
+    struct dbglog_hdr_s debug_hdr;
+    struct dbglog_buf_s debug_buf;
+    A_UINT32 address;
+    A_UINT32 length;
+    A_UINT32 dropped;
+    A_UINT32 firstbuf;
+    A_UINT32 debug_hdr_ptr;
+
+    if (!ar->dbglog_init_done) return A_ERROR;
+
+#ifndef CONFIG_AR6000_WLAN_DEBUG
+    return 0;
+#endif
+
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    if (ar->dbgLogFetchInProgress) {
+        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+        return A_EBUSY;
+    }
+
+        /* block out others */
+    ar->dbgLogFetchInProgress = TRUE;
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+    debug_hdr_ptr = dbglog_get_debug_hdr_ptr(ar);
+    printk("debug_hdr_ptr: 0x%x\n", debug_hdr_ptr);
+
+    /* Get the contents of the ring buffer */
+    if (debug_hdr_ptr) {
+        address = debug_hdr_ptr;
+        length = sizeof(struct dbglog_hdr_s);
+        ar6000_ReadDataDiag(ar->arHifDevice, address,
+                            (A_UCHAR *)&debug_hdr, length);
+        address = (A_UINT32)debug_hdr.dbuf;
+        firstbuf = address;
+        dropped = debug_hdr.dropped;
+        length = sizeof(struct dbglog_buf_s);
+        ar6000_ReadDataDiag(ar->arHifDevice, address,
+                            (A_UCHAR *)&debug_buf, length);
+
+        do {
+            address = (A_UINT32)debug_buf.buffer;
+            length = debug_buf.length;
+            if ((length) && (debug_buf.length <= debug_buf.bufsize)) {
+                /* Rewind the index if it is about to overrun the buffer */
+                if (ar->log_cnt > (DBGLOG_HOST_LOG_BUFFER_SIZE - length)) {
+                    ar->log_cnt = 0;
+                }
+                if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address,
+                                    (A_UCHAR *)&ar->log_buffer[ar->log_cnt], length))
+                {
+                    break;
+                }
+                ar6000_dbglog_event(ar, dropped, &ar->log_buffer[ar->log_cnt], length);
+                ar->log_cnt += length;
+            } else {
+                AR_DEBUG_PRINTF("Length: %d (Total size: %d)\n",
+                                debug_buf.length, debug_buf.bufsize);
+            }
+
+            address = (A_UINT32)debug_buf.next;
+            length = sizeof(struct dbglog_buf_s);
+            if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address,
+                                (A_UCHAR *)&debug_buf, length))
+            {
+                break;
+            }
+
+        } while (address != firstbuf);
+    }
+
+    ar->dbgLogFetchInProgress = FALSE;
+
+    return A_OK;
+}
+
+void
+ar6000_dbglog_event(AR_SOFTC_T *ar, A_UINT32 dropped,
+                    A_INT8 *buffer, A_UINT32 length)
+{
+#ifdef REPORT_DEBUG_LOGS_TO_APP
+    #define MAX_WIRELESS_EVENT_SIZE 252
+    /*
+     * Break it up into chunks of MAX_WIRELESS_EVENT_SIZE bytes of messages.
+     * There seems to be a limitation on the length of message that could be
+     * transmitted to the user app via this mechanism.
+     */
+    A_UINT32 send, sent;
+
+    sent = 0;
+    send = dbglog_get_debug_fragment(&buffer[sent], length - sent,
+                                     MAX_WIRELESS_EVENT_SIZE);
+    while (send) {
+        ar6000_send_event_to_app(ar, WMIX_DBGLOG_EVENTID, &buffer[sent], send);
+        sent += send;
+        send = dbglog_get_debug_fragment(&buffer[sent], length - sent,
+                                         MAX_WIRELESS_EVENT_SIZE);
+    }
+#else
+    AR_DEBUG_PRINTF("Dropped logs: 0x%x\nDebug info length: %d\n",
+                    dropped, length);
+
+    /* Interpret the debug logs */
+    dbglog_parse_debug_logs(buffer, length);
+#endif /* REPORT_DEBUG_LOGS_TO_APP */
+}
+
+
+
+static int __init
+ar6000_init_module(void)
+{
+    static int probed = 0;
+    A_STATUS status;
+    HTC_INIT_INFO initInfo;
+
+    A_MEMZERO(&initInfo,sizeof(initInfo));
+    initInfo.AddInstance = ar6000_avail_ev;
+    initInfo.DeleteInstance = ar6000_unavail_ev;
+    initInfo.TargetFailure = ar6000_target_failure;
+
+
+#ifdef DEBUG
+    /* Set the debug flags if specified at load time */
+    if(debugflags != 0)
+    {
+        g_dbg_flags = debugflags;
+    }
+#endif
+
+    if (probed) {
+        return -ENODEV;
+    }
+    probed++;
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+    memset(&aptcTR, 0, sizeof(APTC_TRAFFIC_RECORD));
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+    ar6000_gpio_init();
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+    status = HTCInit(&initInfo);
+    if(status != A_OK)
+        return -ENODEV;
+
+    return 0;
+}
+
+static void __exit
+ar6000_cleanup_module(void)
+{
+    int i = 0;
+    struct net_device *ar6000_netdev;
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+    /* Delete the Adaptive Power Control timer */
+    if (timer_pending(&aptcTimer)) {
+        del_timer_sync(&aptcTimer);
+    }
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+    for (i=0; i < MAX_AR6000; i++) {
+        if (ar6000_devices[i] != NULL) {
+            ar6000_netdev = ar6000_devices[i];
+            ar6000_devices[i] = NULL;
+            ar6000_destroy(ar6000_netdev, 1);
+        }
+    }
+
+        /* shutting down HTC will cause the HIF layer to detach from the
+         * underlying bus driver which will cause the subsequent deletion of
+         * all HIF and HTC instances */
+    HTCShutDown();
+
+    AR_DEBUG_PRINTF("ar6000_cleanup: success\n");
+}
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+void
+aptcTimerHandler(unsigned long arg)
+{
+    A_UINT32 numbytes;
+    A_UINT32 throughput;
+    AR_SOFTC_T *ar;
+    A_STATUS status;
+
+    ar = (AR_SOFTC_T *)arg;
+    A_ASSERT(ar != NULL);
+    A_ASSERT(!timer_pending(&aptcTimer));
+
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    /* Get the number of bytes transferred */
+    numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived;
+    aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0;
+
+    /* Calculate and decide based on throughput thresholds */
+    throughput = ((numbytes * 8)/APTC_TRAFFIC_SAMPLING_INTERVAL); /* Kbps */
+    if (throughput < APTC_LOWER_THROUGHPUT_THRESHOLD) {
+        /* Enable Sleep and delete the timer */
+        A_ASSERT(ar->arWmiReady == TRUE);
+        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+        status = wmi_powermode_cmd(ar->arWmi, REC_POWER);
+        AR6000_SPIN_LOCK(&ar->arLock, 0);
+        A_ASSERT(status == A_OK);
+        aptcTR.timerScheduled = FALSE;
+    } else {
+        A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0);
+    }
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+}
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+
+
+/* set HTC block size, assume BMI is already initialized */
+A_STATUS ar6000_SetHTCBlockSize(AR_SOFTC_T *ar)
+{
+    A_STATUS status;
+    A_UINT32 blocksizes[HTC_MAILBOX_NUM_MAX];
+
+    do {
+            /* get the block sizes */
+        status = HIFConfigureDevice(ar->arHifDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
+                                    blocksizes, sizeof(blocksizes));
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF("Failed to get block size info from HIF layer...\n");
+            break;
+        }
+            /* note: we actually get the block size for mailbox 1, for SDIO the block
+             * size on mailbox 0 is artificially set to 1 */
+            /* must be a power of 2 */
+        A_ASSERT((blocksizes[1] & (blocksizes[1] - 1)) == 0);
+
+            /* set the host interest area for the block size */
+        status = BMIWriteMemory(ar->arHifDevice,
+                                HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_io_block_sz),
+                                (A_UCHAR *)&blocksizes[1],
+                                4);
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF("BMIWriteMemory for IO block size failed \n");
+            break;
+        }
+
+        AR_DEBUG_PRINTF("Block Size Set: %d (target address:0x%X)\n",
+                blocksizes[1], HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_io_block_sz));
+
+            /* set the host interest area for the mbox ISR yield limit */
+        status = BMIWriteMemory(ar->arHifDevice,
+                                HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_isr_yield_limit),
+                                (A_UCHAR *)&mbox_yield_limit,
+                                4);
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF("BMIWriteMemory for yield limit failed \n");
+            break;
+        }
+
+    } while (FALSE);
+
+    return status;
+}
+
+static void free_raw_buffers(AR_SOFTC_T *ar)
+{
+    int i, j;
+
+    for (i = 0; i != HTC_RAW_STREAM_NUM_MAX; i++) {
+	for (j = 0; j != RAW_HTC_READ_BUFFERS_NUM; j++)
+	    kfree(ar->raw_htc_read_buffer[i][j]);
+	for (j = 0; j != RAW_HTC_WRITE_BUFFERS_NUM; j++)
+	    kfree(ar->raw_htc_write_buffer[i][j]);
+    }
+}
+
+static int alloc_raw_buffers(AR_SOFTC_T *ar)
+{
+    int i, j;
+    raw_htc_buffer *b;
+
+    for (i = 0; i != HTC_RAW_STREAM_NUM_MAX; i++) {
+	for (j = 0; j != RAW_HTC_READ_BUFFERS_NUM; j++) {
+	    b = kzalloc(sizeof(*b), GFP_KERNEL);
+	    if (!b)
+		return -ENOMEM;
+	    ar->raw_htc_read_buffer[i][j] = b;
+	}
+	for (j = 0; j != RAW_HTC_WRITE_BUFFERS_NUM; j++) {
+	    b = kzalloc(sizeof(*b), GFP_KERNEL);
+	    if (!b)
+		return -ENOMEM;
+	    ar->raw_htc_write_buffer[i][j] = b;
+	}
+    }
+    return 0;
+}
+
+static const struct net_device_ops ar6000_netdev_ops = {
+    .ndo_init = &ar6000_init,
+    .ndo_open = &ar6000_open,
+    .ndo_stop = &ar6000_close,
+    .ndo_start_xmit = &ar6000_data_tx,
+    .ndo_get_stats = &ar6000_get_stats,
+    .ndo_do_ioctl = &ar6000_ioctl,
+};
+/*
+ * HTC Event handlers
+ */
+static void
+ar6000_avail_ev(HTC_HANDLE HTCHandle)
+{
+    int i;
+    struct net_device *dev;
+    AR_SOFTC_T *ar;
+    int device_index = 0;
+
+    AR_DEBUG_PRINTF("ar6000_available\n");
+
+    for (i=0; i < MAX_AR6000; i++) {
+        if (ar6000_devices[i] == NULL) {
+            break;
+        }
+    }
+
+    if (i == MAX_AR6000) {
+        AR_DEBUG_PRINTF("ar6000_available: max devices reached\n");
+        return;
+    }
+
+    /* Save this. It gives a bit better readability especially since */
+    /* we use another local "i" variable below.                      */
+    device_index = i;
+
+    A_ASSERT(HTCHandle != NULL);
+
+    dev = alloc_etherdev(sizeof(AR_SOFTC_T));
+    if (dev == NULL) {
+        AR_DEBUG_PRINTF("ar6000_available: can't alloc etherdev\n");
+        return;
+    }
+
+    ether_setup(dev);
+
+    if (netdev_priv(dev) == NULL) {
+        printk(KERN_CRIT "ar6000_available: Could not allocate memory\n");
+        return;
+    }
+
+    A_MEMZERO(netdev_priv(dev), sizeof(AR_SOFTC_T));
+
+    ar                       = (AR_SOFTC_T *)netdev_priv(dev);
+    ar->arNetDev             = dev;
+    ar->arHtcTarget          = HTCHandle;
+    ar->arHifDevice          = HTCGetHifDevice(HTCHandle);
+    ar->arWlanState          = WLAN_ENABLED;
+    ar->arRadioSwitch        = WLAN_ENABLED;
+    ar->arDeviceIndex        = device_index;
+
+    A_INIT_TIMER(&ar->arHBChallengeResp.timer, ar6000_detect_error, dev);
+    ar->arHBChallengeResp.seqNum = 0;
+    ar->arHBChallengeResp.outstanding = FALSE;
+    ar->arHBChallengeResp.missCnt = 0;
+    ar->arHBChallengeResp.frequency = AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT;
+    ar->arHBChallengeResp.missThres = AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT;
+
+    ar6000_init_control_info(ar);
+    init_waitqueue_head(&arEvent);
+    sema_init(&ar->arSem, 1);
+
+    if (alloc_raw_buffers(ar)) {
+	free_raw_buffers(ar);
+	/*
+	 * @@@ Clean up our own mess, but for anything else, cheerfully mimick
+	 * the beautiful error non-handling of the rest of this function.
+	 */
+	return;
+    }
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+    A_INIT_TIMER(&aptcTimer, aptcTimerHandler, ar);
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+    /*
+     * If requested, perform some magic which requires no cooperation from
+     * the Target.  It causes the Target to ignore flash and execute to the
+     * OS from ROM.
+     *
+     * This is intended to support recovery from a corrupted flash on Targets
+     * that support flash.
+     */
+    if (skipflash)
+    {
+        ar6000_reset_device_skipflash(ar->arHifDevice);
+            }
+
+    BMIInit();
+    {
+        struct bmi_target_info targ_info;
+
+        if (BMIGetTargetInfo(ar->arHifDevice, &targ_info) != A_OK) {
+            return;
+        }
+
+        ar->arVersion.target_ver = targ_info.target_ver;
+        ar->arTargetType = targ_info.target_type;
+    }
+
+    if (enableuartprint) {
+        A_UINT32 param;
+        param = 1;
+        if (BMIWriteMemory(ar->arHifDevice,
+                           HOST_INTEREST_ITEM_ADDRESS(ar, hi_serial_enable),
+                           (A_UCHAR *)&param,
+                           4)!= A_OK)
+        {
+             AR_DEBUG_PRINTF("BMIWriteMemory for enableuartprint failed \n");
+             return ;
+        }
+        AR_DEBUG_PRINTF("Serial console prints enabled\n");
+    }
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+    if(testmode) {
+        ar->arTargetMode = AR6000_TCMD_MODE;
+    }else {
+        ar->arTargetMode = AR6000_WLAN_MODE;
+    }
+#endif
+    if (enabletimerwar) {
+        A_UINT32 param;
+
+        if (BMIReadMemory(ar->arHifDevice,
+            HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
+            (A_UCHAR *)&param,
+            4)!= A_OK)
+        {
+            AR_DEBUG_PRINTF("BMIReadMemory for enabletimerwar failed \n");
+            return;
+        }
+
+        param |= HI_OPTION_TIMER_WAR;
+
+        if (BMIWriteMemory(ar->arHifDevice,
+            HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
+            (A_UCHAR *)&param,
+            4) != A_OK)
+        {
+            AR_DEBUG_PRINTF("BMIWriteMemory for enabletimerwar failed \n");
+            return;
+        }
+        AR_DEBUG_PRINTF("Timer WAR enabled\n");
+    }
+
+
+        /* since BMIInit is called in the driver layer, we have to set the block
+         * size here for the target */
+
+    if (A_FAILED(ar6000_SetHTCBlockSize(ar))) {
+        return;
+    }
+
+    spin_lock_init(&ar->arLock);
+
+    dev->netdev_ops = &ar6000_netdev_ops;
+    dev->watchdog_timeo = AR6000_TX_TIMEOUT;
+    ar6000_ioctl_iwsetup(&ath_iw_handler_def);
+    dev->wireless_handlers = &ath_iw_handler_def;
+    ath_iw_handler_def.get_wireless_stats = ar6000_get_iwstats; /*Displayed via proc fs */
+
+    /*
+     * We need the OS to provide us with more headroom in order to
+     * perform dix to 802.3, WMI header encap, and the HTC header
+     */
+    dev->hard_header_len = ETH_HLEN + sizeof(ATH_LLC_SNAP_HDR) +
+        sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN;
+
+    /* This runs the init function */
+    SET_NETDEV_DEV(dev, HIFGetOSDevice(ar->arHifDevice));
+    if (register_netdev(dev)) {
+        AR_DEBUG_PRINTF("ar6000_avail: register_netdev failed\n");
+        ar6000_destroy(dev, 0);
+        return;
+    }
+
+    HTCSetInstance(ar->arHtcTarget, ar);
+
+    /* We only register the device in the global list if we succeed. */
+    /* If the device is in the global list, it will be destroyed     */
+    /* when the module is unloaded.                                  */
+    ar6000_devices[device_index] = dev;
+
+    AR_DEBUG_PRINTF("ar6000_avail: name=%s htcTarget=0x%x, dev=0x%x (%d), ar=0x%x\n",
+                    dev->name, (A_UINT32)HTCHandle, (A_UINT32)dev, device_index,
+                    (A_UINT32)ar);
+}
+
+static void ar6000_target_failure(void *Instance, A_STATUS Status)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance;
+    WMI_TARGET_ERROR_REPORT_EVENT errEvent;
+    static A_BOOL sip = FALSE;
+
+    if (Status != A_OK) {
+        if (timer_pending(&ar->arHBChallengeResp.timer)) {
+            A_UNTIMEOUT(&ar->arHBChallengeResp.timer);
+        }
+
+        /* try dumping target assertion information (if any) */
+        ar6000_dump_target_assert_info(ar->arHifDevice,ar->arTargetType);
+
+        /*
+         * Fetch the logs from the target via the diagnostic
+         * window.
+         */
+        ar6000_dbglog_get_debug_logs(ar);
+
+        /* Report the error only once */
+        if (!sip) {
+            sip = TRUE;
+            errEvent.errorVal = WMI_TARGET_COM_ERR |
+                                WMI_TARGET_FATAL_ERR;
+#ifdef SEND_EVENT_TO_APP
+            ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID,
+                                     (A_UINT8 *)&errEvent,
+                                     sizeof(WMI_TARGET_ERROR_REPORT_EVENT));
+#endif
+        }
+    }
+}
+
+static void
+ar6000_unavail_ev(void *Instance)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance;
+        /* NULL out it's entry in the global list */
+    ar6000_devices[ar->arDeviceIndex] = NULL;
+    ar6000_destroy(ar->arNetDev, 1);
+}
+
+/*
+ * We need to differentiate between the surprise and planned removal of the
+ * device because of the following consideration:
+ * - In case of surprise removal, the hcd already frees up the pending
+ *   for the device and hence there is no need to unregister the function
+ *   driver inorder to get these requests. For planned removal, the function
+ *   driver has to explictly unregister itself to have the hcd return all the
+ *   pending requests before the data structures for the devices are freed up.
+ *   Note that as per the current implementation, the function driver will
+ *   end up releasing all the devices since there is no API to selectively
+ *   release a particular device.
+ * - Certain commands issued to the target can be skipped for surprise
+ *   removal since they will anyway not go through.
+ */
+static void
+ar6000_destroy(struct net_device *dev, unsigned int unregister)
+{
+    AR_SOFTC_T *ar;
+
+    AR_DEBUG_PRINTF("+ar6000_destroy \n");
+
+    if((dev == NULL) || ((ar = netdev_priv(dev)) == NULL))
+    {
+        AR_DEBUG_PRINTF("%s(): Failed to get device structure.\n", __func__);
+        return;
+    }
+
+    /* Clear the tx counters */
+    memset(tx_attempt, 0, sizeof(tx_attempt));
+    memset(tx_post, 0, sizeof(tx_post));
+    memset(tx_complete, 0, sizeof(tx_complete));
+
+    /* Free up the device data structure */
+    if (unregister) {
+	unregister_netdev(dev);
+    } else {
+	ar6000_close(dev);
+    ar6000_cleanup(dev);
+    }
+
+    free_raw_buffers(ar);
+
+#ifndef free_netdev
+    kfree(dev);
+#else
+    free_netdev(dev);
+#endif
+
+    AR_DEBUG_PRINTF("-ar6000_destroy \n");
+}
+
+static void ar6000_detect_error(unsigned long ptr)
+{
+    struct net_device *dev = (struct net_device *)ptr;
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_TARGET_ERROR_REPORT_EVENT errEvent;
+
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    if (ar->arHBChallengeResp.outstanding) {
+        ar->arHBChallengeResp.missCnt++;
+    } else {
+        ar->arHBChallengeResp.missCnt = 0;
+    }
+
+    if (ar->arHBChallengeResp.missCnt > ar->arHBChallengeResp.missThres) {
+        /* Send Error Detect event to the application layer and do not reschedule the error detection module timer */
+        ar->arHBChallengeResp.missCnt = 0;
+        ar->arHBChallengeResp.seqNum = 0;
+        errEvent.errorVal = WMI_TARGET_COM_ERR | WMI_TARGET_FATAL_ERR;
+        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+#ifdef SEND_EVENT_TO_APP
+        ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID,
+                                 (A_UINT8 *)&errEvent,
+                                 sizeof(WMI_TARGET_ERROR_REPORT_EVENT));
+#endif
+        return;
+    }
+
+    /* Generate the sequence number for the next challenge */
+    ar->arHBChallengeResp.seqNum++;
+    ar->arHBChallengeResp.outstanding = TRUE;
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+    /* Send the challenge on the control channel */
+    if (wmi_get_challenge_resp_cmd(ar->arWmi, ar->arHBChallengeResp.seqNum, DRV_HB_CHALLENGE) != A_OK) {
+        AR_DEBUG_PRINTF("Unable to send heart beat challenge\n");
+    }
+
+
+    /* Reschedule the timer for the next challenge */
+    A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0);
+}
+
+void ar6000_init_profile_info(AR_SOFTC_T *ar)
+{
+    ar->arSsidLen            = 0;
+    A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+    ar->arNetworkType        = INFRA_NETWORK;
+    ar->arDot11AuthMode      = OPEN_AUTH;
+    ar->arAuthMode           = NONE_AUTH;
+    ar->arPairwiseCrypto     = NONE_CRYPT;
+    ar->arPairwiseCryptoLen  = 0;
+    ar->arGroupCrypto        = NONE_CRYPT;
+    ar->arGroupCryptoLen     = 0;
+    A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList));
+    A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
+    A_MEMZERO(ar->arBssid, sizeof(ar->arBssid));
+    ar->arBssChannel = 0;
+}
+
+static void
+ar6000_init_control_info(AR_SOFTC_T *ar)
+{
+    ar->arWmiEnabled         = FALSE;
+    ar6000_init_profile_info(ar);
+    ar->arDefTxKeyIndex      = 0;
+    A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList));
+    ar->arChannelHint        = 0;
+    ar->arListenInterval     = MAX_LISTEN_INTERVAL;
+    ar->arVersion.host_ver   = AR6K_SW_VERSION;
+    ar->arRssi               = 0;
+    ar->arTxPwr              = 0;
+    ar->arTxPwrSet           = FALSE;
+    ar->arSkipScan           = 0;
+    ar->arBeaconInterval     = 0;
+    ar->arBitRate            = 0;
+    ar->arMaxRetries         = 0;
+    ar->arWmmEnabled         = TRUE;
+}
+
+static int
+ar6000_open(struct net_device *dev)
+{
+    /* Wake up the queues */
+    netif_start_queue(dev);
+
+    return 0;
+}
+
+static int
+ar6000_close(struct net_device *dev)
+{
+    /* Stop the transmit queues */ 
+    netif_stop_queue(dev); 
+    return 0; 
+}
+
+static int 
+ar6000_cleanup(struct net_device *dev)
+{
+    AR_SOFTC_T *ar = netdev_priv(dev);
+
+    /* Stop the transmit queues */
+    netif_stop_queue(dev);
+
+    /* Disable the target and the interrupts associated with it */
+    if (ar->arWmiReady == TRUE)
+    {
+        if (!bypasswmi)
+        {
+            if (ar->arConnected == TRUE || ar->arConnectPending == TRUE)
+            {
+                AR_DEBUG_PRINTF("%s(): Disconnect\n", __func__);
+                AR6000_SPIN_LOCK(&ar->arLock, 0);
+                ar6000_init_profile_info(ar);
+                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+                wmi_disconnect_cmd(ar->arWmi);
+            }
+
+            ar6000_dbglog_get_debug_logs(ar);
+            ar->arWmiReady  = FALSE;
+            ar->arConnected = FALSE;
+            ar->arConnectPending = FALSE;
+            wmi_shutdown(ar->arWmi);
+            ar->arWmiEnabled = FALSE;
+            ar->arWmi = NULL;
+            ar->arWlanState = WLAN_ENABLED;
+#ifdef USER_KEYS
+            ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
+            ar->user_key_ctrl      = 0;
+#endif
+        }
+
+         AR_DEBUG_PRINTF("%s(): WMI stopped\n", __func__);
+    }
+    else
+    {
+        AR_DEBUG_PRINTF("%s(): WMI not ready 0x%08x 0x%08x\n",
+            __func__, (unsigned int) ar, (unsigned int) ar->arWmi);
+
+        /* Shut down WMI if we have started it */
+        if(ar->arWmiEnabled == TRUE)
+        {
+            AR_DEBUG_PRINTF("%s(): Shut down WMI\n", __func__);
+            wmi_shutdown(ar->arWmi);
+            ar->arWmiEnabled = FALSE;
+            ar->arWmi = NULL;
+        }
+    }
+
+    /* stop HTC */
+    HTCStop(ar->arHtcTarget);
+
+    /* set the instance to NULL so we do not get called back on remove incase we
+     * we're explicity destroyed by module unload */
+    HTCSetInstance(ar->arHtcTarget, NULL);
+
+    if (resetok) {
+        /* try to reset the device if we can
+         * The driver may have been configure NOT to reset the target during
+         * a debug session */
+        AR_DEBUG_PRINTF(" Attempting to reset target on instance destroy.... \n");
+        ar6000_reset_device(ar->arHifDevice, ar->arTargetType);
+    } else {
+        AR_DEBUG_PRINTF(" Host does not want target reset. \n");
+    }
+
+       /* Done with cookies */
+    ar6000_cookie_cleanup(ar);
+
+    /* Cleanup BMI */
+    BMIInit();
+
+    return 0;
+}
+
+/* connect to a service */
+static A_STATUS ar6000_connectservice(AR_SOFTC_T               *ar,
+                                      HTC_SERVICE_CONNECT_REQ  *pConnect,
+                                      WMI_PRI_STREAM_ID        WmiStreamID,
+                                      char                     *pDesc)
+{
+    A_STATUS                 status;
+    HTC_SERVICE_CONNECT_RESP response;
+
+    do {
+
+        A_MEMZERO(&response,sizeof(response));
+
+        status = HTCConnectService(ar->arHtcTarget,
+                                   pConnect,
+                                   &response);
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF(" Failed to connect to %s service status:%d \n", pDesc, status);
+            break;
+        }
+
+        if (WmiStreamID == WMI_NOT_MAPPED) {
+                /* done */
+            break;
+        }
+
+            /* set endpoint mapping for the WMI stream in the driver layer */
+        arSetWMIStream2EndpointIDMap(ar,WmiStreamID,response.Endpoint);
+
+    } while (FALSE);
+
+    return status;
+}
+
+static void ar6000_TxDataCleanup(AR_SOFTC_T *ar)
+{
+        /* flush all the data (non-control) streams
+         * we only flush packets that are tagged as data, we leave any control packets that
+         * were in the TX queues alone */
+    HTCFlushEndpoint(ar->arHtcTarget,
+                     arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI),
+                     AR6K_DATA_PKT_TAG);
+    HTCFlushEndpoint(ar->arHtcTarget,
+                     arWMIStream2EndpointID(ar,WMI_LOW_PRI),
+                     AR6K_DATA_PKT_TAG);
+    HTCFlushEndpoint(ar->arHtcTarget,
+                     arWMIStream2EndpointID(ar,WMI_HIGH_PRI),
+                     AR6K_DATA_PKT_TAG);
+    HTCFlushEndpoint(ar->arHtcTarget,
+                     arWMIStream2EndpointID(ar,WMI_HIGHEST_PRI),
+                     AR6K_DATA_PKT_TAG);
+}
+
+/* This function does one time initialization for the lifetime of the device */
+int ar6000_init(struct net_device *dev)
+{
+    AR_SOFTC_T *ar;
+    A_STATUS    status;
+    A_INT32     timeleft;
+
+    if((ar = netdev_priv(dev)) == NULL)
+    {
+        return(-EIO);
+    }
+
+    /* Do we need to finish the BMI phase */
+    if(BMIDone(ar->arHifDevice) != A_OK)
+    {
+        return -EIO;
+    }
+
+    if (!bypasswmi)
+    {
+#if 0 /* TBDXXX */
+        if (ar->arVersion.host_ver != ar->arVersion.target_ver) {
+            A_PRINTF("WARNING: Host version 0x%x does not match Target "
+                    " version 0x%x!\n",
+                    ar->arVersion.host_ver, ar->arVersion.target_ver);
+        }
+#endif
+
+        /* Indicate that WMI is enabled (although not ready yet) */
+        ar->arWmiEnabled = TRUE;
+        if ((ar->arWmi = wmi_init((void *) ar)) == NULL)
+        {
+            AR_DEBUG_PRINTF("%s() Failed to initialize WMI.\n", __func__);
+            return(-EIO);
+        }
+
+        AR_DEBUG_PRINTF("%s() Got WMI @ 0x%08x.\n", __func__,
+            (unsigned int) ar->arWmi);
+    }
+
+    do {
+        HTC_SERVICE_CONNECT_REQ connect;
+
+            /* the reason we have to wait for the target here is that the driver layer
+             * has to init BMI in order to set the host block size,
+             */
+        status = HTCWaitTarget(ar->arHtcTarget);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        A_MEMZERO(&connect,sizeof(connect));
+            /* meta data is unused for now */
+        connect.pMetaData = NULL;
+        connect.MetaDataLength = 0;
+            /* these fields are the same for all service endpoints */
+        connect.EpCallbacks.pContext = ar;
+        connect.EpCallbacks.EpTxComplete = ar6000_tx_complete;
+        connect.EpCallbacks.EpRecv = ar6000_rx;
+        connect.EpCallbacks.EpRecvRefill = ar6000_rx_refill;
+        connect.EpCallbacks.EpSendFull = ar6000_tx_queue_full;
+        connect.EpCallbacks.EpSendAvail = ar6000_tx_queue_avail;
+            /* set the max queue depth so that our ar6000_tx_queue_full handler gets called.
+             * Linux has the peculiarity of not providing flow control between the
+             * NIC and the network stack. There is no API to indicate that a TX packet
+             * was sent which could provide some back pressure to the network stack.
+             * Under linux you would have to wait till the network stack consumed all sk_buffs
+             * before any back-flow kicked in. Which isn't very friendly.
+             * So we have to manage this ourselves */
+        connect.MaxSendQueueDepth = 32;
+
+            /* connect to control service */
+        connect.ServiceID = WMI_CONTROL_SVC;
+        status = ar6000_connectservice(ar,
+                                       &connect,
+                                       WMI_CONTROL_PRI,
+                                       "WMI CONTROL");
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* for the remaining data services set the connection flag to reduce dribbling,
+             * if configured to do so */
+        if (reduce_credit_dribble) {
+            connect.ConnectionFlags |= HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE;
+            /* the credit dribble trigger threshold is (reduce_credit_dribble - 1) for a value
+             * of 0-3 */
+            connect.ConnectionFlags &= ~HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK;
+            connect.ConnectionFlags |=
+                        ((A_UINT16)reduce_credit_dribble - 1) & HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK;
+        }
+            /* connect to best-effort service */
+        connect.ServiceID = WMI_DATA_BE_SVC;
+
+        status = ar6000_connectservice(ar,
+                                       &connect,
+                                       WMI_BEST_EFFORT_PRI,
+                                       "WMI DATA BE");
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* connect to back-ground
+             * map this to WMI LOW_PRI */
+        connect.ServiceID = WMI_DATA_BK_SVC;
+        status = ar6000_connectservice(ar,
+                                       &connect,
+                                       WMI_LOW_PRI,
+                                       "WMI DATA BK");
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* connect to Video service, map this to
+             * to HI PRI */
+        connect.ServiceID = WMI_DATA_VI_SVC;
+        status = ar6000_connectservice(ar,
+                                       &connect,
+                                       WMI_HIGH_PRI,
+                                       "WMI DATA VI");
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* connect to VO service, this is currently not
+             * mapped to a WMI priority stream due to historical reasons.
+             * WMI originally defined 3 priorities over 3 mailboxes
+             * We can change this when WMI is reworked so that priorities are not
+             * dependent on mailboxes */
+        connect.ServiceID = WMI_DATA_VO_SVC;
+        status = ar6000_connectservice(ar,
+                                       &connect,
+                                       WMI_HIGHEST_PRI,
+                                       "WMI DATA VO");
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        A_ASSERT(arWMIStream2EndpointID(ar,WMI_CONTROL_PRI) != 0);
+        A_ASSERT(arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI) != 0);
+        A_ASSERT(arWMIStream2EndpointID(ar,WMI_LOW_PRI) != 0);
+        A_ASSERT(arWMIStream2EndpointID(ar,WMI_HIGH_PRI) != 0);
+        A_ASSERT(arWMIStream2EndpointID(ar,WMI_HIGHEST_PRI) != 0);
+    } while (FALSE);
+
+    if (A_FAILED(status)) {
+        return (-EIO);
+    }
+
+    /*
+     * give our connected endpoints some buffers
+     */
+    ar6000_rx_refill(ar, arWMIStream2EndpointID(ar,WMI_CONTROL_PRI));
+
+    ar6000_rx_refill(ar, arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI));
+
+    /*
+     * We will post the receive buffers only for SPE testing and so we are
+     * making it conditional on the 'bypasswmi' flag.
+     */
+    if (bypasswmi) {
+        ar6000_rx_refill(ar,arWMIStream2EndpointID(ar,WMI_LOW_PRI));
+        ar6000_rx_refill(ar,arWMIStream2EndpointID(ar,WMI_HIGH_PRI));
+    }
+
+        /* setup credit distribution */
+    ar6000_setup_credit_dist(ar->arHtcTarget, &ar->arCreditStateInfo);
+
+    /* Since cookies are used for HTC transports, they should be */
+    /* initialized prior to enabling HTC.                        */
+    ar6000_cookie_init(ar);
+
+    /* start HTC */
+    status = HTCStart(ar->arHtcTarget);
+
+    if (status != A_OK) {
+        if (ar->arWmiEnabled == TRUE) {
+            wmi_shutdown(ar->arWmi);
+            ar->arWmiEnabled = FALSE;
+            ar->arWmi = NULL;
+        }
+        ar6000_cookie_cleanup(ar);
+        return -EIO;
+    }
+
+    if (!bypasswmi) {
+        /* Wait for Wmi event to be ready */
+        timeleft = wait_event_interruptible_timeout(arEvent,
+            (ar->arWmiReady == TRUE), wmitimeout * HZ);
+
+        if(!timeleft || signal_pending(current))
+        {
+            AR_DEBUG_PRINTF("WMI is not ready or wait was interrupted\n");
+#if defined(DWSIM) /* TBDXXX */
+            AR_DEBUG_PRINTF(".....but proceed anyway.\n");
+#else
+            return -EIO;
+#endif
+        }
+
+        AR_DEBUG_PRINTF("%s() WMI is ready\n", __func__);
+
+        /* Communicate the wmi protocol verision to the target */
+        if ((ar6000_set_host_app_area(ar)) != A_OK) {
+            AR_DEBUG_PRINTF("Unable to set the host app area\n");
+        }
+    }
+
+    ar->arNumDataEndPts = 1;
+
+    return(0);
+}
+
+
+void
+ar6000_bitrate_rx(void *devt, A_INT32 rateKbps)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+    ar->arBitRate = rateKbps;
+    wake_up(&arEvent);
+}
+
+void
+ar6000_ratemask_rx(void *devt, A_UINT16 ratemask)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+    ar->arRateMask = ratemask;
+    wake_up(&arEvent);
+}
+
+void
+ar6000_txPwr_rx(void *devt, A_UINT8 txPwr)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+    ar->arTxPwr = txPwr;
+    wake_up(&arEvent);
+}
+
+
+void
+ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+    A_MEMCPY(ar->arChannelList, chanList, numChan * sizeof (A_UINT16));
+    ar->arNumChannels = numChan;
+
+    wake_up(&arEvent);
+}
+
+A_UINT8
+ar6000_ibss_map_epid(struct sk_buff *skb, struct net_device *dev, A_UINT32 * mapNo)
+{
+    AR_SOFTC_T      *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    A_UINT8         *datap;
+    ATH_MAC_HDR     *macHdr;
+    A_UINT32         i, eptMap;
+
+    (*mapNo) = 0;
+    datap = A_NETBUF_DATA(skb);
+    macHdr = (ATH_MAC_HDR *)(datap + sizeof(WMI_DATA_HDR));
+    if (IEEE80211_IS_MULTICAST(macHdr->dstMac)) {
+        return ENDPOINT_2;
+    }
+
+    eptMap = -1;
+    for (i = 0; i < ar->arNodeNum; i ++) {
+        if (IEEE80211_ADDR_EQ(macHdr->dstMac, ar->arNodeMap[i].macAddress)) {
+            (*mapNo) = i + 1;
+            ar->arNodeMap[i].txPending ++;
+            return ar->arNodeMap[i].epId;
+        }
+
+        if ((eptMap == -1) && !ar->arNodeMap[i].txPending) {
+            eptMap = i;
+        }
+    }
+
+    if (eptMap == -1) {
+        eptMap = ar->arNodeNum;
+        ar->arNodeNum ++;
+        A_ASSERT(ar->arNodeNum <= MAX_NODE_NUM);
+    }
+
+    A_MEMCPY(ar->arNodeMap[eptMap].macAddress, macHdr->dstMac, IEEE80211_ADDR_LEN);
+
+    for (i = ENDPOINT_2; i <= ENDPOINT_5; i ++) {
+        if (!ar->arTxPending[i]) {
+            ar->arNodeMap[eptMap].epId = i;
+            break;
+        }
+        // No free endpoint is available, start redistribution on the inuse endpoints.
+        if (i == ENDPOINT_5) {
+            ar->arNodeMap[eptMap].epId = ar->arNexEpId;
+            ar->arNexEpId ++;
+            if (ar->arNexEpId > ENDPOINT_5) {
+                ar->arNexEpId = ENDPOINT_2;
+            }
+        }
+    }
+
+    (*mapNo) = eptMap + 1;
+    ar->arNodeMap[eptMap].txPending ++;
+
+    return ar->arNodeMap[eptMap].epId;
+}
+
+#ifdef DEBUG
+static void ar6000_dump_skb(struct sk_buff *skb)
+{
+   u_char *ch;
+   for (ch = A_NETBUF_DATA(skb);
+        (A_UINT32)ch < ((A_UINT32)A_NETBUF_DATA(skb) +
+        A_NETBUF_LEN(skb)); ch++)
+    {
+         AR_DEBUG_PRINTF("%2.2x ", *ch);
+    }
+    AR_DEBUG_PRINTF("\n");
+}
+#endif
+
+static int
+ar6000_data_tx(struct sk_buff *skb, struct net_device *dev)
+{
+    AR_SOFTC_T        *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_PRI_STREAM_ID streamID = WMI_NOT_MAPPED;
+    A_UINT32          mapNo = 0;
+    int               len;
+    struct ar_cookie *cookie;
+    A_BOOL            checkAdHocPsMapping = FALSE;
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13)
+    skb->list = NULL;
+#endif
+
+    AR_DEBUG2_PRINTF("ar6000_data_tx start - skb=0x%x, data=0x%x, len=0x%x\n",
+                     (A_UINT32)skb, (A_UINT32)A_NETBUF_DATA(skb),
+                     A_NETBUF_LEN(skb));
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+     /* TCMD doesnt support any data, free the buf and return */
+    if(ar->arTargetMode == AR6000_TCMD_MODE) {
+        A_NETBUF_FREE(skb);
+        return 0;
+    }
+#endif
+    do {
+
+        if (ar->arWmiReady == FALSE && bypasswmi == 0) {
+            break;
+        }
+
+#ifdef BLOCK_TX_PATH_FLAG
+        if (blocktx) {
+            break;
+        }
+#endif /* BLOCK_TX_PATH_FLAG */
+
+        if (ar->arWmiEnabled) {
+            if (A_NETBUF_HEADROOM(skb) < dev->hard_header_len) {
+                struct sk_buff  *newbuf;
+                /*
+                 * We really should have gotten enough headroom but sometimes
+                 * we still get packets with not enough headroom.  Copy the packet.
+                 */
+                len = A_NETBUF_LEN(skb);
+                newbuf = A_NETBUF_ALLOC(len);
+                if (newbuf == NULL) {
+                    break;
+                }
+                A_NETBUF_PUT(newbuf, len);
+                A_MEMCPY(A_NETBUF_DATA(newbuf), A_NETBUF_DATA(skb), len);
+                A_NETBUF_FREE(skb);
+                skb = newbuf;
+                /* fall through and assemble header */
+            }
+
+            if (wmi_dix_2_dot3(ar->arWmi, skb) != A_OK) {
+                AR_DEBUG_PRINTF("ar6000_data_tx - wmi_dix_2_dot3 failed\n");
+                break;
+            }
+
+            if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE) != A_OK) {
+                AR_DEBUG_PRINTF("ar6000_data_tx - wmi_data_hdr_add failed\n");
+                break;
+            }
+
+            if ((ar->arNetworkType == ADHOC_NETWORK) &&
+                ar->arIbssPsEnable && ar->arConnected) {
+                    /* flag to check adhoc mapping once we take the lock below: */
+                checkAdHocPsMapping = TRUE;
+
+            } else {
+                    /* get the stream mapping */
+                if (ar->arWmmEnabled) {
+                    streamID = wmi_get_stream_id(ar->arWmi,
+                                    wmi_implicit_create_pstream(ar->arWmi, skb, UPLINK_TRAFFIC, UNDEFINED_PRI));
+                } else {
+                    streamID = WMI_BEST_EFFORT_PRI;
+                }
+            }
+
+        } else {
+            struct iphdr    *ipHdr;
+            /*
+             * the endpoint is directly based on the TOS field in the IP
+             * header **** only for testing ******
+             */
+            ipHdr = A_NETBUF_DATA(skb) + sizeof(ATH_MAC_HDR);
+                /* here we map the TOS field to an endpoint number, this is for
+                 * the endpointping test application */
+            streamID = IP_TOS_TO_WMI_PRI(ipHdr->tos);
+        }
+
+    } while (FALSE);
+
+        /* did we succeed ? */
+    if ((streamID == WMI_NOT_MAPPED) && !checkAdHocPsMapping) {
+            /* cleanup and exit */
+        A_NETBUF_FREE(skb);
+        AR6000_STAT_INC(ar, tx_dropped);
+        AR6000_STAT_INC(ar, tx_aborted_errors);
+        return 0;
+    }
+
+    cookie = NULL;
+
+        /* take the lock to protect driver data */
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    do {
+
+        if (checkAdHocPsMapping) {
+            streamID = ar6000_ibss_map_epid(skb, dev, &mapNo);
+        }
+
+        A_ASSERT(streamID != WMI_NOT_MAPPED);
+
+            /* validate that the endpoint is connected */
+        if (arWMIStream2EndpointID(ar,streamID) == 0) {
+            AR_DEBUG_PRINTF("Stream %d is NOT mapped!\n",streamID);
+            break;
+        }
+            /* allocate resource for this packet */
+        cookie = ar6000_alloc_cookie(ar);
+
+        if (cookie != NULL) {
+                /* update counts while the lock is held */
+            ar->arTxPending[streamID]++;
+            ar->arTotalTxDataPending++;
+        }
+
+    } while (FALSE);
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+    if (cookie != NULL) {
+        cookie->arc_bp[0] = (A_UINT32)skb;
+        cookie->arc_bp[1] = mapNo;
+        SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
+                               cookie,
+                               A_NETBUF_DATA(skb),
+                               A_NETBUF_LEN(skb),
+                               arWMIStream2EndpointID(ar,streamID),
+                               AR6K_DATA_PKT_TAG);
+
+#ifdef DEBUG
+        if (debugdriver >= 3) {
+            ar6000_dump_skb(skb);
+        }
+#endif
+            /* HTC interface is asynchronous, if this fails, cleanup will happen in
+             * the ar6000_tx_complete callback */
+        HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
+    } else {
+            /* no packet to send, cleanup */
+        A_NETBUF_FREE(skb);
+        AR6000_STAT_INC(ar, tx_dropped);
+        AR6000_STAT_INC(ar, tx_aborted_errors);
+    }
+
+    return 0;
+}
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+static void
+tvsub(register struct timeval *out, register struct timeval *in)
+{
+    if((out->tv_usec -= in->tv_usec) < 0) {
+        out->tv_sec--;
+        out->tv_usec += 1000000;
+    }
+    out->tv_sec -= in->tv_sec;
+}
+
+void
+applyAPTCHeuristics(AR_SOFTC_T *ar)
+{
+    A_UINT32 duration;
+    A_UINT32 numbytes;
+    A_UINT32 throughput;
+    struct timeval ts;
+    A_STATUS status;
+
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    if ((enableAPTCHeuristics) && (!aptcTR.timerScheduled)) {
+        do_gettimeofday(&ts);
+        tvsub(&ts, &aptcTR.samplingTS);
+        duration = ts.tv_sec * 1000 + ts.tv_usec / 1000; /* ms */
+        numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived;
+
+        if (duration > APTC_TRAFFIC_SAMPLING_INTERVAL) {
+            /* Initialize the time stamp and byte count */
+            aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0;
+            do_gettimeofday(&aptcTR.samplingTS);
+
+            /* Calculate and decide based on throughput thresholds */
+            throughput = ((numbytes * 8) / duration);
+            if (throughput > APTC_UPPER_THROUGHPUT_THRESHOLD) {
+                /* Disable Sleep and schedule a timer */
+                A_ASSERT(ar->arWmiReady == TRUE);
+                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+                status = wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER);
+                AR6000_SPIN_LOCK(&ar->arLock, 0);
+                A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0);
+                aptcTR.timerScheduled = TRUE;
+            }
+        }
+    }
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+}
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+static void
+ar6000_tx_queue_full(void *Context, HTC_ENDPOINT_ID Endpoint)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *) Context;
+
+    if (Endpoint == arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)) {
+        if (!bypasswmi) {
+                /* under normal WMI if this is getting full, then something is running rampant
+                 * the host should not be exhausting the WMI queue with too many commands
+                 * the only exception to this is during testing using endpointping */
+
+            AR6000_SPIN_LOCK(&ar->arLock, 0);
+                /* set flag to handle subsequent messages */
+            ar->arWMIControlEpFull = TRUE;
+            AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+            AR_DEBUG_PRINTF("WMI Control Endpoint is FULL!!! \n");
+        }
+    } else {
+        /* one of the data endpoints queues is getting full..need to stop network stack
+         * the queue will resume after credits received */
+        netif_stop_queue(ar->arNetDev);
+    }
+}
+
+static void
+ar6000_tx_queue_avail(void *Context, HTC_ENDPOINT_ID Endpoint)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
+
+    if (Endpoint == arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)) {
+        /* FIXME: what do for it?  */
+    } else {
+        /* Wake up interface, rescheduling prevented.  */
+        if (ar->arConnected == TRUE || bypasswmi)
+            netif_wake_queue(ar->arNetDev);
+    }
+}
+
+static void
+ar6000_tx_complete(void *Context, HTC_PACKET *pPacket)
+{
+    AR_SOFTC_T     *ar = (AR_SOFTC_T *)Context;
+    void           *cookie = (void *)pPacket->pPktContext;
+    struct sk_buff *skb = NULL;
+    A_UINT32        mapNo = 0;
+    A_STATUS        status;
+    struct ar_cookie * ar_cookie;
+    WMI_PRI_STREAM_ID streamID;
+    A_BOOL          wakeEvent = FALSE;
+
+    status = pPacket->Status;
+    ar_cookie = (struct ar_cookie *)cookie;
+    skb = (struct sk_buff *)ar_cookie->arc_bp[0];
+    streamID = arEndpoint2WMIStreamID(ar,pPacket->Endpoint);
+    mapNo = ar_cookie->arc_bp[1];
+
+    A_ASSERT(skb);
+    A_ASSERT(pPacket->pBuffer == A_NETBUF_DATA(skb));
+
+    if (A_SUCCESS(status)) {
+        A_ASSERT(pPacket->ActualLength == A_NETBUF_LEN(skb));
+    }
+
+    AR_DEBUG2_PRINTF("ar6000_tx_complete skb=0x%x data=0x%x len=0x%x sid=%d ",
+                     (A_UINT32)skb, (A_UINT32)pPacket->pBuffer,
+                     pPacket->ActualLength,
+                     streamID);
+
+        /* lock the driver as we update internal state */
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    ar->arTxPending[streamID]--;
+
+    if ((streamID != WMI_CONTROL_PRI) || bypasswmi) {
+        ar->arTotalTxDataPending--;
+    }
+
+    if (streamID == WMI_CONTROL_PRI)
+    {
+        if (ar->arWMIControlEpFull) {
+                /* since this packet completed, the WMI EP is no longer full */
+            ar->arWMIControlEpFull = FALSE;
+        }
+
+        if (ar->arTxPending[streamID] == 0) {
+            wakeEvent = TRUE;
+        }
+    }
+
+    if (A_FAILED(status)) {
+        AR_DEBUG_PRINTF("%s() -TX ERROR, status: 0x%x\n", __func__,
+                        status);
+        AR6000_STAT_INC(ar, tx_errors);
+    } else {
+        AR_DEBUG2_PRINTF("OK\n");
+        AR6000_STAT_INC(ar, tx_packets);
+        ar->arNetStats.tx_bytes += A_NETBUF_LEN(skb);
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+        aptcTR.bytesTransmitted += a_netbuf_to_len(skb);
+        applyAPTCHeuristics(ar);
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+    }
+
+    // TODO this needs to be looked at
+    if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable
+        && (streamID != WMI_CONTROL_PRI) && mapNo)
+    {
+        mapNo --;
+        ar->arNodeMap[mapNo].txPending --;
+
+        if (!ar->arNodeMap[mapNo].txPending && (mapNo == (ar->arNodeNum - 1))) {
+            A_UINT32 i;
+            for (i = ar->arNodeNum; i > 0; i --) {
+                if (!ar->arNodeMap[i - 1].txPending) {
+                    A_MEMZERO(&ar->arNodeMap[i - 1], sizeof(struct ar_node_mapping));
+                    ar->arNodeNum --;
+                } else {
+                    break;
+                }
+            }
+        }
+    }
+
+    /* Freeing a cookie should not be contingent on either of */
+    /* these flags, just if we have a cookie or not.           */
+    /* Can we even get here without a cookie? Fix later.       */
+    if (ar->arWmiReady == TRUE || (bypasswmi))
+    {
+        ar6000_free_cookie(ar, cookie);
+    }
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+    /* lock is released, we can freely call other kernel APIs */
+
+        /* this indirectly frees the HTC_PACKET */
+    A_NETBUF_FREE(skb);
+
+    if (wakeEvent) {
+        wake_up(&arEvent);
+    }
+}
+
+/*
+ * Receive event handler.  This is called by HTC when a packet is received
+ */
+int pktcount;
+static void
+ar6000_rx(void *Context, HTC_PACKET *pPacket)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
+    struct sk_buff *skb = (struct sk_buff *)pPacket->pPktContext;
+    int minHdrLen;
+    A_STATUS        status = pPacket->Status;
+    WMI_PRI_STREAM_ID streamID = arEndpoint2WMIStreamID(ar,pPacket->Endpoint);
+    HTC_ENDPOINT_ID   ept = pPacket->Endpoint;
+
+    A_ASSERT((status != A_OK) || (pPacket->pBuffer == (A_NETBUF_DATA(skb) + HTC_HEADER_LEN)));
+
+    AR_DEBUG2_PRINTF("ar6000_rx ar=0x%x sid=%d, skb=0x%x, data=0x%x, len=0x%x ",
+                    (A_UINT32)ar, streamID, (A_UINT32)skb, (A_UINT32)pPacket->pBuffer,
+                    pPacket->ActualLength);
+    if (status != A_OK) {
+        AR_DEBUG2_PRINTF("ERR\n");
+    } else {
+        AR_DEBUG2_PRINTF("OK\n");
+    }
+
+        /* take lock to protect buffer counts
+         * and adaptive power throughput state */
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    ar->arRxBuffers[streamID]--;
+
+    if (A_SUCCESS(status)) {
+        AR6000_STAT_INC(ar, rx_packets);
+        ar->arNetStats.rx_bytes += pPacket->ActualLength;
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+        aptcTR.bytesReceived += a_netbuf_to_len(skb);
+        applyAPTCHeuristics(ar);
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+        A_NETBUF_PUT(skb, pPacket->ActualLength +  HTC_HEADER_LEN);
+        A_NETBUF_PULL(skb, HTC_HEADER_LEN);
+
+#ifdef DEBUG
+        if (debugdriver >= 2) {
+            ar6000_dump_skb(skb);
+        }
+#endif /* DEBUG */
+    }
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+    if (status != A_OK) {
+        AR6000_STAT_INC(ar, rx_errors);
+        A_NETBUF_FREE(skb);
+    } else if (ar->arWmiEnabled == TRUE) {
+        if (streamID == WMI_CONTROL_PRI) {
+           /*
+            * this is a wmi control msg
+            */
+            wmi_control_rx(ar->arWmi, skb);
+        } else {
+            WMI_DATA_HDR *dhdr = (WMI_DATA_HDR *)A_NETBUF_DATA(skb);
+            if (WMI_DATA_HDR_IS_MSG_TYPE(dhdr, CNTL_MSGTYPE)) {
+                /*
+                 * this is a wmi control msg
+                 */
+                /* strip off WMI hdr */
+                wmi_data_hdr_remove(ar->arWmi, skb);
+                wmi_control_rx(ar->arWmi, skb);
+            } else {
+                /*
+                 * this is a wmi data packet
+                 */
+                minHdrLen = sizeof (WMI_DATA_HDR) + sizeof(ATH_MAC_HDR) +
+                            sizeof(ATH_LLC_SNAP_HDR);
+
+                if ((pPacket->ActualLength < minHdrLen) ||
+                    (pPacket->ActualLength > AR6000_BUFFER_SIZE))
+                {
+                    /*
+                     * packet is too short or too long
+                     */
+                    AR_DEBUG_PRINTF("TOO SHORT or TOO LONG\n");
+                    AR6000_STAT_INC(ar, rx_errors);
+                    AR6000_STAT_INC(ar, rx_length_errors);
+                    A_NETBUF_FREE(skb);
+                } else {
+                    if (ar->arWmmEnabled) {
+                        wmi_implicit_create_pstream(ar->arWmi, skb,
+                            DNLINK_TRAFFIC, UNDEFINED_PRI);
+                    }
+#if 0
+                    /* Access RSSI values here */
+                    AR_DEBUG_PRINTF("RSSI %d\n",
+                        ((WMI_DATA_HDR *) A_NETBUF_DATA(skb))->rssi);
+#endif
+                    wmi_data_hdr_remove(ar->arWmi, skb);
+                    wmi_dot3_2_dix(ar->arWmi, skb);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+                    /*
+                     * extra push and memcpy, for eth_type_trans() of 2.4 kernel
+                     * will pull out hard_header_len bytes of the skb.
+                     */
+                    A_NETBUF_PUSH(skb, sizeof(WMI_DATA_HDR) + sizeof(ATH_LLC_SNAP_HDR) + HTC_HEADER_LEN);
+                    A_MEMCPY(A_NETBUF_DATA(skb), A_NETBUF_DATA(skb) + sizeof(WMI_DATA_HDR) +
+                             sizeof(ATH_LLC_SNAP_HDR) + HTC_HEADER_LEN, sizeof(ATH_MAC_HDR));
+#endif
+                    if ((ar->arNetDev->flags & IFF_UP) == IFF_UP)
+                    {
+                        skb->dev = ar->arNetDev;
+                        skb->protocol = eth_type_trans(skb, ar->arNetDev);
+                        netif_rx(skb);
+                    }
+                    else
+                    {
+                        A_NETBUF_FREE(skb);
+                    }
+                }
+            }
+        }
+    } else {
+        if ((ar->arNetDev->flags & IFF_UP) == IFF_UP)
+        {
+            skb->dev = ar->arNetDev;
+            skb->protocol = eth_type_trans(skb, ar->arNetDev);
+            netif_rx(skb);
+        }
+        else
+        {
+            A_NETBUF_FREE(skb);
+        }
+    }
+
+    if (status != A_ECANCELED) {
+        /*
+         * HTC provides A_ECANCELED status when it doesn't want to be refilled
+         * (probably due to a shutdown)
+         */
+        ar6000_rx_refill(Context, ept);
+    }
+
+
+}
+
+static void
+ar6000_rx_refill(void *Context, HTC_ENDPOINT_ID Endpoint)
+{
+    AR_SOFTC_T  *ar = (AR_SOFTC_T *)Context;
+    void        *osBuf;
+    int         RxBuffers;
+    int         buffersToRefill;
+    HTC_PACKET  *pPacket;
+    WMI_PRI_STREAM_ID streamId = arEndpoint2WMIStreamID(ar,Endpoint);
+
+    buffersToRefill = (int)AR6000_MAX_RX_BUFFERS -
+                                    (int)ar->arRxBuffers[streamId];
+
+    if (buffersToRefill <= 0) {
+            /* fast return, nothing to fill */
+        return;
+    }
+
+    AR_DEBUG2_PRINTF("ar6000_rx_refill: providing htc with %d buffers at eid=%d\n",
+                    buffersToRefill, Endpoint);
+
+    for (RxBuffers = 0; RxBuffers < buffersToRefill; RxBuffers++) {
+        osBuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE);
+        if (NULL == osBuf) {
+            break;
+        }
+            /* the HTC packet wrapper is at the head of the reserved area
+             * in the skb */
+        pPacket = (HTC_PACKET *)(A_NETBUF_HEAD(osBuf));
+            /* set re-fill info */
+        SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_BUFFER_SIZE,Endpoint);
+            /* add this packet */
+        HTCAddReceivePkt(ar->arHtcTarget, pPacket);
+    }
+
+        /* update count */
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+    ar->arRxBuffers[streamId] += RxBuffers;
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+}
+
+static struct net_device_stats *
+ar6000_get_stats(struct net_device *dev)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    return &ar->arNetStats;
+}
+
+static struct iw_statistics *
+ar6000_get_iwstats(struct net_device * dev)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    TARGET_STATS *pStats = &ar->arTargetStats;
+    struct iw_statistics * pIwStats = &ar->arIwStats;
+
+    if ((ar->arWmiReady == FALSE)
+    /*
+     * The in_atomic function is used to determine if the scheduling is
+     * allowed in the current context or not. This was introduced in 2.6
+     * From what I have read on the differences between 2.4 and 2.6, the
+     * 2.4 kernel did not support preemption and so this check might not
+     * be required for 2.4 kernels.
+     */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+        || (in_atomic())
+#endif
+       )
+    {
+        pIwStats->status = 0;
+        pIwStats->qual.qual = 0;
+        pIwStats->qual.level =0;
+        pIwStats->qual.noise = 0;
+        pIwStats->discard.code =0;
+        pIwStats->discard.retries=0;
+        pIwStats->miss.beacon =0;
+        return pIwStats;
+    }
+    if (down_interruptible(&ar->arSem)) {
+        pIwStats->status = 0;
+        return pIwStats;
+    }
+
+
+    ar->statsUpdatePending = TRUE;
+
+    if(wmi_get_stats_cmd(ar->arWmi) != A_OK) {
+        up(&ar->arSem);
+        pIwStats->status = 0;
+        return pIwStats;
+    }
+
+    wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ);
+
+    if (signal_pending(current)) {
+        AR_DEBUG_PRINTF("ar6000 : WMI get stats timeout \n");
+        up(&ar->arSem);
+        pIwStats->status = 0;
+        return pIwStats;
+    }
+    pIwStats->status = 1 ;
+    pIwStats->qual.qual = pStats->cs_aveBeacon_rssi;
+    pIwStats->qual.level =pStats->cs_aveBeacon_rssi + 161;  /* noise is -95 dBm */
+    pIwStats->qual.noise = pStats->noise_floor_calibation;
+    pIwStats->discard.code = pStats->rx_decrypt_err;
+    pIwStats->discard.retries = pStats->tx_retry_cnt;
+    pIwStats->miss.beacon = pStats->cs_bmiss_cnt;
+    up(&ar->arSem);
+    return pIwStats;
+}
+
+void
+ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+    struct net_device *dev = ar->arNetDev;
+
+    ar->arWmiReady = TRUE;
+    wake_up(&arEvent);
+    A_MEMCPY(dev->dev_addr, datap, AR6000_ETH_ADDR_LEN);
+    AR_DEBUG_PRINTF("mac address = %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
+        dev->dev_addr[0], dev->dev_addr[1],
+        dev->dev_addr[2], dev->dev_addr[3],
+        dev->dev_addr[4], dev->dev_addr[5]);
+
+    ar->arPhyCapability = phyCap;
+}
+
+A_UINT8
+ar6000_iptos_to_userPriority(A_UINT8 *pkt)
+{
+    struct iphdr *ipHdr = (struct iphdr *)pkt;
+    A_UINT8 userPriority;
+
+    /*
+     * IP Tos format :
+     *      (Refer Pg 57 WMM-test-plan-v1.2)
+     * IP-TOS - 8bits
+     *          : DSCP(6-bits) ECN(2-bits)
+     *          : DSCP - P2 P1 P0 X X X
+     *              where (P2 P1 P0) form 802.1D
+     */
+    userPriority = ipHdr->tos >> 5;
+    return (userPriority & 0x7);
+}
+
+void
+ar6000_connect_event(AR_SOFTC_T *ar, A_UINT16 channel, A_UINT8 *bssid,
+                     A_UINT16 listenInterval, A_UINT16 beaconInterval,
+                     NETWORK_TYPE networkType, A_UINT8 beaconIeLen,
+                     A_UINT8 assocReqLen, A_UINT8 assocRespLen,
+                     A_UINT8 *assocInfo)
+{
+    union iwreq_data wrqu;
+    int i, beacon_ie_pos, assoc_resp_ie_pos, assoc_req_ie_pos;
+    static const char *tag1 = "ASSOCINFO(ReqIEs=";
+    static const char *tag2 = "ASSOCRESPIE=";
+    static const char *beaconIetag = "BEACONIE=";
+    char buf[WMI_CONTROL_MSG_MAX_LEN * 2 + sizeof(tag1)];
+    char *pos;
+    A_UINT8 key_op_ctrl;
+
+    A_MEMCPY(ar->arBssid, bssid, sizeof(ar->arBssid));
+    ar->arBssChannel = channel;
+
+    A_PRINTF("AR6000 connected event on freq %d ", channel);
+    A_PRINTF("with bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
+            " listenInterval=%d, beaconInterval = %d, beaconIeLen = %d assocReqLen=%d"
+            " assocRespLen =%d\n",
+             bssid[0], bssid[1], bssid[2],
+             bssid[3], bssid[4], bssid[5],
+             listenInterval, beaconInterval,
+             beaconIeLen, assocReqLen, assocRespLen);
+    if (networkType & ADHOC_NETWORK) {
+        if (networkType & ADHOC_CREATOR) {
+            A_PRINTF("Network: Adhoc (Creator)\n");
+        } else {
+            A_PRINTF("Network: Adhoc (Joiner)\n");
+        }
+    } else {
+        A_PRINTF("Network: Infrastructure\n");
+    }
+
+    if (beaconIeLen && (sizeof(buf) > (9 + beaconIeLen * 2))) {
+        AR_DEBUG_PRINTF("\nBeaconIEs= ");
+
+        beacon_ie_pos = 0;
+        A_MEMZERO(buf, sizeof(buf));
+        sprintf(buf, "%s", beaconIetag);
+        pos = buf + 9;
+        for (i = beacon_ie_pos; i < beacon_ie_pos + beaconIeLen; i++) {
+            AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
+            sprintf(pos, "%2.2x", assocInfo[i]);
+            pos += 2;
+        }
+        AR_DEBUG_PRINTF("\n");
+
+        A_MEMZERO(&wrqu, sizeof(wrqu));
+        wrqu.data.length = strlen(buf);
+        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+    }
+
+    if (assocRespLen && (sizeof(buf) > (12 + (assocRespLen * 2))))
+    {
+        assoc_resp_ie_pos = beaconIeLen + assocReqLen +
+                            sizeof(A_UINT16)  +  /* capinfo*/
+                            sizeof(A_UINT16)  +  /* status Code */
+                            sizeof(A_UINT16)  ;  /* associd */
+        A_MEMZERO(buf, sizeof(buf));
+        sprintf(buf, "%s", tag2);
+        pos = buf + 12;
+        AR_DEBUG_PRINTF("\nAssocRespIEs= ");
+        /*
+         * The Association Response Frame w.o. the WLAN header is delivered to
+         * the host, so skip over to the IEs
+         */
+        for (i = assoc_resp_ie_pos; i < assoc_resp_ie_pos + assocRespLen - 6; i++)
+        {
+            AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
+            sprintf(pos, "%2.2x", assocInfo[i]);
+            pos += 2;
+        }
+        AR_DEBUG_PRINTF("\n");
+
+        A_MEMZERO(&wrqu, sizeof(wrqu));
+        wrqu.data.length = strlen(buf);
+        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+    }
+
+    if (assocReqLen && (sizeof(buf) > (17 + (assocReqLen * 2)))) {
+        /*
+         * assoc Request includes capability and listen interval. Skip these.
+         */
+        assoc_req_ie_pos =  beaconIeLen +
+                            sizeof(A_UINT16)  +  /* capinfo*/
+                            sizeof(A_UINT16);    /* listen interval */
+
+        A_MEMZERO(buf, sizeof(buf));
+        sprintf(buf, "%s", tag1);
+        pos = buf + 17;
+        AR_DEBUG_PRINTF("AssocReqIEs= ");
+        for (i = assoc_req_ie_pos; i < assoc_req_ie_pos + assocReqLen - 4; i++) {
+            AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
+            sprintf(pos, "%2.2x", assocInfo[i]);
+            pos += 2;;
+        }
+        AR_DEBUG_PRINTF("\n");
+
+        A_MEMZERO(&wrqu, sizeof(wrqu));
+        wrqu.data.length = strlen(buf);
+        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+    }
+
+#ifdef USER_KEYS
+    if (ar->user_savedkeys_stat == USER_SAVEDKEYS_STAT_RUN &&
+        ar->user_saved_keys.keyOk == TRUE)
+    {
+
+        key_op_ctrl = KEY_OP_VALID_MASK & ~KEY_OP_INIT_TSC;
+        if (ar->user_key_ctrl & AR6000_USER_SETKEYS_RSC_UNCHANGED) {
+            key_op_ctrl &= ~KEY_OP_INIT_RSC;
+        } else {
+            key_op_ctrl |= KEY_OP_INIT_RSC;
+        }
+        ar6000_reinstall_keys(ar, key_op_ctrl);
+    }
+#endif /* USER_KEYS */
+
+        /* flush data queues */
+    ar6000_TxDataCleanup(ar);
+
+    netif_start_queue(ar->arNetDev);
+
+    if ((OPEN_AUTH == ar->arDot11AuthMode) &&
+        (NONE_AUTH == ar->arAuthMode)      &&
+        (WEP_CRYPT == ar->arPairwiseCrypto))
+    {
+        if (!ar->arConnected) {
+            ar6000_install_static_wep_keys(ar);
+        }
+    }
+
+    ar->arConnected  = TRUE;
+    ar->arConnectPending = FALSE;
+
+    reconnect_flag = 0;
+
+    A_MEMZERO(&wrqu, sizeof(wrqu));
+    A_MEMCPY(wrqu.addr.sa_data, bssid, IEEE80211_ADDR_LEN);
+    wrqu.addr.sa_family = ARPHRD_ETHER;
+    wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL);
+    if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable) {
+        A_MEMZERO(ar->arNodeMap, sizeof(ar->arNodeMap));
+        ar->arNodeNum = 0;
+        ar->arNexEpId = ENDPOINT_2;
+    }
+
+}
+
+void ar6000_set_numdataendpts(AR_SOFTC_T *ar, A_UINT32 num)
+{
+    A_ASSERT(num <= (HTC_MAILBOX_NUM_MAX - 1));
+    ar->arNumDataEndPts = num;
+}
+
+void
+ar6000_disconnect_event(AR_SOFTC_T *ar, A_UINT8 reason, A_UINT8 *bssid,
+                        A_UINT8 assocRespLen, A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus)
+{
+    A_UINT8 i;
+
+    A_PRINTF("AR6000 disconnected");
+    if (bssid[0] || bssid[1] || bssid[2] || bssid[3] || bssid[4] || bssid[5]) {
+        A_PRINTF(" from %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",
+                 bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5]);
+    }
+    A_PRINTF("\n");
+
+    AR_DEBUG_PRINTF("\nDisconnect Reason is %d", reason);
+    AR_DEBUG_PRINTF("\nProtocol Reason/Status Code is %d", protocolReasonStatus);
+    AR_DEBUG_PRINTF("\nAssocResp Frame = %s",
+                    assocRespLen ? " " : "NULL");
+    for (i = 0; i < assocRespLen; i++) {
+        if (!(i % 0x10)) {
+            AR_DEBUG_PRINTF("\n");
+        }
+        AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
+    }
+    AR_DEBUG_PRINTF("\n");
+    /*
+     * If the event is due to disconnect cmd from the host, only they the target
+     * would stop trying to connect. Under any other condition, target would
+     * keep trying to connect.
+     *
+     */
+    if( reason == DISCONNECT_CMD)
+    {
+        ar->arConnectPending = FALSE;
+    } else {
+        ar->arConnectPending = TRUE;
+        if (((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x11)) ||
+            ((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x0) && (reconnect_flag == 1))) {
+            ar->arConnected = TRUE;
+            return;
+        }
+    }
+    ar->arConnected = FALSE;
+
+    if( (reason != CSERV_DISCONNECT) || (reconnect_flag != 1) ) {
+        reconnect_flag = 0;
+    }
+
+#ifdef USER_KEYS
+    if (reason != CSERV_DISCONNECT)
+    {
+        ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
+        ar->user_key_ctrl      = 0;
+    }
+#endif /* USER_KEYS */
+
+    netif_stop_queue(ar->arNetDev);
+    A_MEMZERO(ar->arBssid, sizeof(ar->arBssid));
+    ar->arBssChannel = 0;
+    ar->arBeaconInterval = 0;
+
+    ar6000_TxDataCleanup(ar);
+}
+
+void
+ar6000_regDomain_event(AR_SOFTC_T *ar, A_UINT32 regCode)
+{
+    A_PRINTF("AR6000 Reg Code = 0x%x\n", regCode);
+    ar->arRegCode = regCode;
+}
+
+void
+ar6000_neighborReport_event(AR_SOFTC_T *ar, int numAps, WMI_NEIGHBOR_INFO *info)
+{
+    static const char *tag = "PRE-AUTH";
+    char buf[128];
+    union iwreq_data wrqu;
+    int i;
+
+    AR_DEBUG_PRINTF("AR6000 Neighbor Report Event\n");
+    for (i=0; i < numAps; info++, i++) {
+        AR_DEBUG_PRINTF("bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",
+            info->bssid[0], info->bssid[1], info->bssid[2],
+            info->bssid[3], info->bssid[4], info->bssid[5]);
+        if (info->bssFlags & WMI_PREAUTH_CAPABLE_BSS) {
+            AR_DEBUG_PRINTF("preauth-cap");
+        }
+        if (info->bssFlags & WMI_PMKID_VALID_BSS) {
+            AR_DEBUG_PRINTF(" pmkid-valid\n");
+            continue;           /* we skip bss if the pmkid is already valid */
+        }
+        AR_DEBUG_PRINTF("\n");
+        snprintf(buf, sizeof(buf), "%s%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x",
+                 tag,
+                 info->bssid[0], info->bssid[1], info->bssid[2],
+                 info->bssid[3], info->bssid[4], info->bssid[5],
+                 i, info->bssFlags);
+        A_MEMZERO(&wrqu, sizeof(wrqu));
+        wrqu.data.length = strlen(buf);
+        wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+    }
+}
+
+void
+ar6000_tkip_micerr_event(AR_SOFTC_T *ar, A_UINT8 keyid, A_BOOL ismcast)
+{
+    static const char *tag = "MLME-MICHAELMICFAILURE.indication";
+    char buf[128];
+    union iwreq_data wrqu;
+
+    A_PRINTF("AR6000 TKIP MIC error received for keyid %d %scast\n",
+             keyid, ismcast ? "multi": "uni");
+    snprintf(buf, sizeof(buf), "%s(keyid=%d %scat)", tag, keyid,
+             ismcast ? "multi" : "uni");
+    memset(&wrqu, 0, sizeof(wrqu));
+    wrqu.data.length = strlen(buf);
+    wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+}
+
+void
+ar6000_scanComplete_event(AR_SOFTC_T *ar, A_STATUS status)
+{
+	AR_DEBUG_PRINTF("AR6000 scan complete: %d\n", status);
+
+	ar->scan_complete = 1;
+	wake_up_interruptible(&ar6000_scan_queue);
+}
+
+void
+ar6000_targetStats_event(AR_SOFTC_T *ar,  WMI_TARGET_STATS *pTarget)
+{
+    TARGET_STATS *pStats = &ar->arTargetStats;
+    A_UINT8 ac;
+
+    /*A_PRINTF("AR6000 updating target stats\n");*/
+    pStats->tx_packets          += pTarget->txrxStats.tx_stats.tx_packets;
+    pStats->tx_bytes            += pTarget->txrxStats.tx_stats.tx_bytes;
+    pStats->tx_unicast_pkts     += pTarget->txrxStats.tx_stats.tx_unicast_pkts;
+    pStats->tx_unicast_bytes    += pTarget->txrxStats.tx_stats.tx_unicast_bytes;
+    pStats->tx_multicast_pkts   += pTarget->txrxStats.tx_stats.tx_multicast_pkts;
+    pStats->tx_multicast_bytes  += pTarget->txrxStats.tx_stats.tx_multicast_bytes;
+    pStats->tx_broadcast_pkts   += pTarget->txrxStats.tx_stats.tx_broadcast_pkts;
+    pStats->tx_broadcast_bytes  += pTarget->txrxStats.tx_stats.tx_broadcast_bytes;
+    pStats->tx_rts_success_cnt  += pTarget->txrxStats.tx_stats.tx_rts_success_cnt;
+    for(ac = 0; ac < WMM_NUM_AC; ac++)
+        pStats->tx_packet_per_ac[ac] += pTarget->txrxStats.tx_stats.tx_packet_per_ac[ac];
+    pStats->tx_errors           += pTarget->txrxStats.tx_stats.tx_errors;
+    pStats->tx_failed_cnt       += pTarget->txrxStats.tx_stats.tx_failed_cnt;
+    pStats->tx_retry_cnt        += pTarget->txrxStats.tx_stats.tx_retry_cnt;
+    pStats->tx_rts_fail_cnt     += pTarget->txrxStats.tx_stats.tx_rts_fail_cnt;
+    pStats->tx_unicast_rate      = wmi_get_rate(pTarget->txrxStats.tx_stats.tx_unicast_rate);
+
+    pStats->rx_packets          += pTarget->txrxStats.rx_stats.rx_packets;
+    pStats->rx_bytes            += pTarget->txrxStats.rx_stats.rx_bytes;
+    pStats->rx_unicast_pkts     += pTarget->txrxStats.rx_stats.rx_unicast_pkts;
+    pStats->rx_unicast_bytes    += pTarget->txrxStats.rx_stats.rx_unicast_bytes;
+    pStats->rx_multicast_pkts   += pTarget->txrxStats.rx_stats.rx_multicast_pkts;
+    pStats->rx_multicast_bytes  += pTarget->txrxStats.rx_stats.rx_multicast_bytes;
+    pStats->rx_broadcast_pkts   += pTarget->txrxStats.rx_stats.rx_broadcast_pkts;
+    pStats->rx_broadcast_bytes  += pTarget->txrxStats.rx_stats.rx_broadcast_bytes;
+    pStats->rx_fragment_pkt     += pTarget->txrxStats.rx_stats.rx_fragment_pkt;
+    pStats->rx_errors           += pTarget->txrxStats.rx_stats.rx_errors;
+    pStats->rx_crcerr           += pTarget->txrxStats.rx_stats.rx_crcerr;
+    pStats->rx_key_cache_miss   += pTarget->txrxStats.rx_stats.rx_key_cache_miss;
+    pStats->rx_decrypt_err      += pTarget->txrxStats.rx_stats.rx_decrypt_err;
+    pStats->rx_duplicate_frames += pTarget->txrxStats.rx_stats.rx_duplicate_frames;
+    pStats->rx_unicast_rate      = wmi_get_rate(pTarget->txrxStats.rx_stats.rx_unicast_rate);
+
+
+    pStats->tkip_local_mic_failure
+                                += pTarget->txrxStats.tkipCcmpStats.tkip_local_mic_failure;
+    pStats->tkip_counter_measures_invoked
+                                += pTarget->txrxStats.tkipCcmpStats.tkip_counter_measures_invoked;
+    pStats->tkip_replays        += pTarget->txrxStats.tkipCcmpStats.tkip_replays;
+    pStats->tkip_format_errors  += pTarget->txrxStats.tkipCcmpStats.tkip_format_errors;
+    pStats->ccmp_format_errors  += pTarget->txrxStats.tkipCcmpStats.ccmp_format_errors;
+    pStats->ccmp_replays        += pTarget->txrxStats.tkipCcmpStats.ccmp_replays;
+
+
+    pStats->power_save_failure_cnt += pTarget->pmStats.power_save_failure_cnt;
+    pStats->noise_floor_calibation = pTarget->noise_floor_calibation;
+
+    pStats->cs_bmiss_cnt        += pTarget->cservStats.cs_bmiss_cnt;
+    pStats->cs_lowRssi_cnt      += pTarget->cservStats.cs_lowRssi_cnt;
+    pStats->cs_connect_cnt      += pTarget->cservStats.cs_connect_cnt;
+    pStats->cs_disconnect_cnt   += pTarget->cservStats.cs_disconnect_cnt;
+    pStats->cs_aveBeacon_snr    = pTarget->cservStats.cs_aveBeacon_snr;
+    pStats->cs_aveBeacon_rssi   = pTarget->cservStats.cs_aveBeacon_rssi;
+    pStats->cs_lastRoam_msec    = pTarget->cservStats.cs_lastRoam_msec;
+    pStats->cs_snr              = pTarget->cservStats.cs_snr;
+    pStats->cs_rssi             = pTarget->cservStats.cs_rssi;
+
+    pStats->lq_val              = pTarget->lqVal;
+
+    pStats->wow_num_pkts_dropped += pTarget->wowStats.wow_num_pkts_dropped;
+    pStats->wow_num_host_pkt_wakeups += pTarget->wowStats.wow_num_host_pkt_wakeups;
+    pStats->wow_num_host_event_wakeups += pTarget->wowStats.wow_num_host_event_wakeups;
+    pStats->wow_num_events_discarded += pTarget->wowStats.wow_num_events_discarded;
+
+    ar->statsUpdatePending = FALSE;
+    wake_up(&arEvent);
+}
+
+void
+ar6000_rssiThreshold_event(AR_SOFTC_T *ar,  WMI_RSSI_THRESHOLD_VAL newThreshold, A_INT16 rssi)
+{
+    USER_RSSI_THOLD userRssiThold;
+
+    userRssiThold.tag = rssi_map[newThreshold].tag;
+    userRssiThold.rssi = rssi;
+    AR_DEBUG2_PRINTF("rssi Threshold range = %d tag = %d  rssi = %d\n", newThreshold, userRssiThold.tag, rssi);
+#ifdef SEND_EVENT_TO_APP
+    ar6000_send_event_to_app(ar, WMI_RSSI_THRESHOLD_EVENTID,(A_UINT8 *)&userRssiThold, sizeof(USER_RSSI_THOLD));
+#endif
+}
+
+
+void
+ar6000_hbChallengeResp_event(AR_SOFTC_T *ar, A_UINT32 cookie, A_UINT32 source)
+{
+    if (source == APP_HB_CHALLENGE) {
+        /* Report it to the app in case it wants a positive acknowledgement */
+#ifdef SEND_EVENT_TO_APP
+        ar6000_send_event_to_app(ar, WMIX_HB_CHALLENGE_RESP_EVENTID,
+                                 (A_UINT8 *)&cookie, sizeof(cookie));
+#endif
+    } else {
+        /* This would ignore the replys that come in after their due time */
+        if (cookie == ar->arHBChallengeResp.seqNum) {
+            ar->arHBChallengeResp.outstanding = FALSE;
+        }
+    }
+}
+
+
+void
+ar6000_reportError_event(AR_SOFTC_T *ar, WMI_TARGET_ERROR_VAL errorVal)
+{
+    char    *errString[] = {
+                [WMI_TARGET_PM_ERR_FAIL]    "WMI_TARGET_PM_ERR_FAIL",
+                [WMI_TARGET_KEY_NOT_FOUND]  "WMI_TARGET_KEY_NOT_FOUND",
+                [WMI_TARGET_DECRYPTION_ERR] "WMI_TARGET_DECRYPTION_ERR",
+                [WMI_TARGET_BMISS]          "WMI_TARGET_BMISS",
+                [WMI_PSDISABLE_NODE_JOIN]   "WMI_PSDISABLE_NODE_JOIN"
+                };
+
+    A_PRINTF("AR6000 Error on Target. Error = 0x%x\n", errorVal);
+
+    /* One error is reported at a time, and errorval is a bitmask */
+    if(errorVal & (errorVal - 1))
+       return;
+
+    A_PRINTF("AR6000 Error type = ");
+    switch(errorVal)
+    {
+        case WMI_TARGET_PM_ERR_FAIL:
+        case WMI_TARGET_KEY_NOT_FOUND:
+        case WMI_TARGET_DECRYPTION_ERR:
+        case WMI_TARGET_BMISS:
+        case WMI_PSDISABLE_NODE_JOIN:
+            A_PRINTF("%s\n", errString[errorVal]);
+            break;
+        default:
+            A_PRINTF("INVALID\n");
+            break;
+    }
+
+}
+
+
+void
+ar6000_cac_event(AR_SOFTC_T *ar, A_UINT8 ac, A_UINT8 cacIndication,
+                 A_UINT8 statusCode, A_UINT8 *tspecSuggestion)
+{
+    WMM_TSPEC_IE    *tspecIe;
+
+    /*
+     * This is the TSPEC IE suggestion from AP.
+     * Suggestion provided by AP under some error
+     * cases, could be helpful for the host app.
+     * Check documentation.
+     */
+    tspecIe = (WMM_TSPEC_IE *)tspecSuggestion;
+
+    /*
+     * What do we do, if we get TSPEC rejection? One thought
+     * that comes to mind is implictly delete the pstream...
+     */
+    A_PRINTF("AR6000 CAC notification. "
+                "AC = %d, cacIndication = 0x%x, statusCode = 0x%x\n",
+                 ac, cacIndication, statusCode);
+}
+
+#define AR6000_PRINT_BSSID(_pBss)  do {     \
+        A_PRINTF("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",\
+                 (_pBss)[0],(_pBss)[1],(_pBss)[2],(_pBss)[3],\
+                 (_pBss)[4],(_pBss)[5]);  \
+} while(0)
+
+void
+ar6000_roam_tbl_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_TBL *pTbl)
+{
+    A_UINT8 i;
+
+    A_PRINTF("ROAM TABLE NO OF ENTRIES is %d ROAM MODE is %d\n",
+              pTbl->numEntries, pTbl->roamMode);
+    for (i= 0; i < pTbl->numEntries; i++) {
+        A_PRINTF("[%d]bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", i,
+            pTbl->bssRoamInfo[i].bssid[0], pTbl->bssRoamInfo[i].bssid[1],
+            pTbl->bssRoamInfo[i].bssid[2],
+            pTbl->bssRoamInfo[i].bssid[3],
+            pTbl->bssRoamInfo[i].bssid[4],
+            pTbl->bssRoamInfo[i].bssid[5]);
+        A_PRINTF("RSSI %d RSSIDT %d LAST RSSI %d UTIL %d ROAM_UTIL %d"
+                 " BIAS %d\n",
+            pTbl->bssRoamInfo[i].rssi,
+            pTbl->bssRoamInfo[i].rssidt,
+            pTbl->bssRoamInfo[i].last_rssi,
+            pTbl->bssRoamInfo[i].util,
+            pTbl->bssRoamInfo[i].roam_util,
+            pTbl->bssRoamInfo[i].bias);
+    }
+}
+
+void
+ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters, WMI_GET_WOW_LIST_REPLY *wow_reply)
+{
+    A_UINT8 i,j;
+
+    /*Each event now contains exactly one filter, see bug 26613*/
+    A_PRINTF("WOW pattern %d of %d patterns\n", wow_reply->this_filter_num,                 wow_reply->num_filters);
+    A_PRINTF("wow mode = %s host mode = %s\n",
+            (wow_reply->wow_mode == 0? "disabled":"enabled"),
+            (wow_reply->host_mode == 1 ? "awake":"asleep"));
+
+
+    /*If there are no patterns, the reply will only contain generic
+      WoW information. Pattern information will exist only if there are
+      patterns present. Bug 26716*/
+
+   /* If this event contains pattern information, display it*/
+    if (wow_reply->this_filter_num) {
+        i=0;
+        A_PRINTF("id=%d size=%d offset=%d\n",
+                    wow_reply->wow_filters[i].wow_filter_id,
+                    wow_reply->wow_filters[i].wow_filter_size,
+                    wow_reply->wow_filters[i].wow_filter_offset);
+       A_PRINTF("wow pattern = ");
+       for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) {
+             A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_pattern[j]);
+        }
+
+        A_PRINTF("\nwow mask = ");
+        for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) {
+            A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_mask[j]);
+        }
+        A_PRINTF("\n");
+    }
+}
+
+/*
+ * Report the Roaming related data collected on the target
+ */
+void
+ar6000_display_roam_time(WMI_TARGET_ROAM_TIME *p)
+{
+    A_PRINTF("Disconnect Data : BSSID: ");
+    AR6000_PRINT_BSSID(p->disassoc_bssid);
+    A_PRINTF(" RSSI %d DISASSOC Time %d NO_TXRX_TIME %d\n",
+             p->disassoc_bss_rssi,p->disassoc_time,
+             p->no_txrx_time);
+    A_PRINTF("Connect Data: BSSID: ");
+    AR6000_PRINT_BSSID(p->assoc_bssid);
+    A_PRINTF(" RSSI %d ASSOC Time %d TXRX_TIME %d\n",
+             p->assoc_bss_rssi,p->assoc_time,
+             p->allow_txrx_time);
+    A_PRINTF("Last Data Tx Time (b4 Disassoc) %d "\
+             "First Data Tx Time (after Assoc) %d\n",
+             p->last_data_txrx_time, p->first_data_txrx_time);
+}
+
+void
+ar6000_roam_data_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_DATA *p)
+{
+    switch (p->roamDataType) {
+        case ROAM_DATA_TIME:
+            ar6000_display_roam_time(&p->u.roamTime);
+            break;
+        default:
+            break;
+    }
+}
+
+void
+ar6000_bssInfo_event_rx(AR_SOFTC_T *ar, A_UINT8 *datap, int len)
+{
+    struct sk_buff *skb;
+    WMI_BSS_INFO_HDR *bih = (WMI_BSS_INFO_HDR *)datap;
+
+
+    if (!ar->arMgmtFilter) {
+        return;
+    }
+    if (((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_BEACON) &&
+        (bih->frameType != BEACON_FTYPE))  ||
+        ((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_PROBE_RESP) &&
+        (bih->frameType != PROBERESP_FTYPE)))
+    {
+        return;
+    }
+
+    if ((skb = A_NETBUF_ALLOC_RAW(len)) != NULL) {
+
+        A_NETBUF_PUT(skb, len);
+        A_MEMCPY(A_NETBUF_DATA(skb), datap, len);
+        skb->dev = ar->arNetDev;
+	printk("MAC RAW...\n");
+//        skb->mac.raw = A_NETBUF_DATA(skb);
+        skb->ip_summed = CHECKSUM_NONE;
+        skb->pkt_type = PACKET_OTHERHOST;
+        skb->protocol = __constant_htons(0x0019);
+        netif_rx(skb);
+    }
+}
+
+A_UINT32 wmiSendCmdNum;
+
+A_STATUS
+ar6000_control_tx(void *devt, void *osbuf, WMI_PRI_STREAM_ID streamID)
+{
+    AR_SOFTC_T       *ar = (AR_SOFTC_T *)devt;
+    A_STATUS         status = A_OK;
+    struct ar_cookie *cookie = NULL;
+    int i;
+
+        /* take lock to protect ar6000_alloc_cookie() */
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    do {
+
+        AR_DEBUG2_PRINTF("ar_contrstatus = ol_tx: skb=0x%x, len=0x%x, sid=%d\n",
+                         (A_UINT32)osbuf, A_NETBUF_LEN(osbuf), streamID);
+
+        if ((streamID == WMI_CONTROL_PRI) && (ar->arWMIControlEpFull)) {
+                /* control endpoint is full, don't allocate resources, we
+                 * are just going to drop this packet */
+            cookie = NULL;
+            AR_DEBUG_PRINTF(" WMI Control EP full, dropping packet : 0x%X, len:%d \n",
+                    (A_UINT32)osbuf, A_NETBUF_LEN(osbuf));
+        } else {
+            cookie = ar6000_alloc_cookie(ar);
+        }
+
+        if (cookie == NULL) {
+            status = A_NO_MEMORY;
+            break;
+        }
+
+        if(logWmiRawMsgs) {
+            A_PRINTF("WMI cmd send, msgNo %d :", wmiSendCmdNum);
+            for(i = 0; i < a_netbuf_to_len(osbuf); i++)
+                A_PRINTF("%x ", ((A_UINT8 *)a_netbuf_to_data(osbuf))[i]);
+            A_PRINTF("\n");
+        }
+
+        wmiSendCmdNum++;
+
+    } while (FALSE);
+
+    if (cookie != NULL) {
+            /* got a structure to send it out on */
+        ar->arTxPending[streamID]++;
+
+        if (streamID != WMI_CONTROL_PRI) {
+            ar->arTotalTxDataPending++;
+        }
+    }
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+    if (cookie != NULL) {
+        cookie->arc_bp[0] = (A_UINT32)osbuf;
+        cookie->arc_bp[1] = 0;
+        SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
+                               cookie,
+                               A_NETBUF_DATA(osbuf),
+                               A_NETBUF_LEN(osbuf),
+                               arWMIStream2EndpointID(ar,streamID),
+                               AR6K_CONTROL_PKT_TAG);
+            /* this interface is asynchronous, if there is an error, cleanup will happen in the
+             * TX completion callback */
+        HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
+        status = A_OK;
+    }
+
+    return status;
+}
+
+/* indicate tx activity or inactivity on a WMI stream */
+void ar6000_indicate_tx_activity(void *devt, A_UINT8 TrafficClass, A_BOOL Active)
+{
+    AR_SOFTC_T  *ar = (AR_SOFTC_T *)devt;
+    WMI_PRI_STREAM_ID streamid;
+
+    if (ar->arWmiEnabled) {
+        streamid = wmi_get_stream_id(ar->arWmi, TrafficClass);
+    } else {
+            /* for mbox ping testing, the traffic class is mapped directly as a stream ID,
+             * see handling of AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE in ioctl.c */
+        streamid = (WMI_PRI_STREAM_ID)TrafficClass;
+    }
+
+        /* notify HTC, this may cause credit distribution changes */
+
+    HTCIndicateActivityChange(ar->arHtcTarget,
+                              arWMIStream2EndpointID(ar,streamid),
+                              Active);
+
+}
+
+module_init(ar6000_init_module);
+module_exit(ar6000_cleanup_module);
+
+/* Init cookie queue */
+static void
+ar6000_cookie_init(AR_SOFTC_T *ar)
+{
+    A_UINT32    i;
+
+    ar->arCookieList = NULL;
+    A_MEMZERO(s_ar_cookie_mem, sizeof(s_ar_cookie_mem));
+
+    for (i = 0; i < MAX_COOKIE_NUM; i++) {
+        ar6000_free_cookie(ar, &s_ar_cookie_mem[i]);
+    }
+}
+
+/* cleanup cookie queue */
+static void
+ar6000_cookie_cleanup(AR_SOFTC_T *ar)
+{
+    /* It is gone .... */
+    ar->arCookieList = NULL;
+}
+
+/* Init cookie queue */
+static void
+ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie)
+{
+    /* Insert first */
+    A_ASSERT(ar != NULL);
+    A_ASSERT(cookie != NULL);
+    cookie->arc_list_next = ar->arCookieList;
+    ar->arCookieList = cookie;
+}
+
+/* cleanup cookie queue */
+static struct ar_cookie *
+ar6000_alloc_cookie(AR_SOFTC_T  *ar)
+{
+    struct ar_cookie   *cookie;
+
+    cookie = ar->arCookieList;
+    if(cookie != NULL)
+    {
+        ar->arCookieList = cookie->arc_list_next;
+    }
+
+    return cookie;
+}
+
+#ifdef SEND_EVENT_TO_APP
+/*
+ * This function is used to send event which come from taget to
+ * the application. The buf which send to application is include
+ * the event ID and event content.
+ */
+#define EVENT_ID_LEN   2
+void ar6000_send_event_to_app(AR_SOFTC_T *ar, A_UINT16 eventId,
+                              A_UINT8 *datap, int len)
+{
+
+#if (WIRELESS_EXT >= 15)
+
+/* note: IWEVCUSTOM only exists in wireless extensions after version 15 */
+
+    char *buf;
+    A_UINT16 size;
+    union iwreq_data wrqu;
+
+    size = len + EVENT_ID_LEN;
+
+    if (size > IW_CUSTOM_MAX) {
+        AR_DEBUG_PRINTF("WMI event ID : 0x%4.4X, len = %d too big for IWEVCUSTOM (max=%d) \n",
+                eventId, size, IW_CUSTOM_MAX);
+        return;
+    }
+
+    buf = A_MALLOC_NOWAIT(size);
+    A_MEMZERO(buf, size);
+    A_MEMCPY(buf, &eventId, EVENT_ID_LEN);
+    A_MEMCPY(buf+EVENT_ID_LEN, datap, len);
+
+    //AR_DEBUG_PRINTF("event ID = %d,len = %d\n",*(A_UINT16*)buf, size);
+    A_MEMZERO(&wrqu, sizeof(wrqu));
+    wrqu.data.length = size;
+    wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+
+    A_FREE(buf);
+#endif
+
+
+}
+#endif
+
+
+void
+ar6000_tx_retry_err_event(void *devt)
+{
+    AR_DEBUG2_PRINTF("Tx retries reach maximum!\n");
+}
+
+void
+ar6000_snrThresholdEvent_rx(void *devt, WMI_SNR_THRESHOLD_VAL newThreshold, A_UINT8 snr)
+{
+    AR_DEBUG2_PRINTF("snr threshold range %d, snr %d\n", newThreshold, snr);
+}
+
+void
+ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL newThreshold, A_UINT8 lq)
+{
+    AR_DEBUG2_PRINTF("lq threshold range %d, lq %d\n", newThreshold, lq);
+}
+
+
+
+A_UINT32
+a_copy_to_user(void *to, const void *from, A_UINT32 n)
+{
+    return(copy_to_user(to, from, n));
+}
+
+A_UINT32
+a_copy_from_user(void *to, const void *from, A_UINT32 n)
+{
+    return(copy_from_user(to, from, n));
+}
+
+
+A_STATUS
+ar6000_get_driver_cfg(struct net_device *dev,
+                        A_UINT16 cfgParam,
+                        void *result)
+{
+
+    A_STATUS    ret = 0;
+
+    switch(cfgParam)
+    {
+        case AR6000_DRIVER_CFG_GET_WLANNODECACHING:
+           *((A_UINT32 *)result) = wlanNodeCaching;
+           break;
+        case AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS:
+           *((A_UINT32 *)result) = logWmiRawMsgs;
+            break;
+        default:
+           ret = EINVAL;
+           break;
+    }
+
+    return ret;
+}
+
+void
+ar6000_keepalive_rx(void *devt, A_UINT8 configured)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+    ar->arKeepaliveConfigured = configured;
+    wake_up(&arEvent);
+}
+
+void
+ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID, WMI_PMKID *pmkidList)
+{
+    A_UINT8 i, j;
+
+    A_PRINTF("Number of Cached PMKIDs is %d\n", numPMKID);
+
+    for (i = 0; i < numPMKID; i++) {
+        A_PRINTF("\nPMKID %d ", i);
+            for (j = 0; j < WMI_PMKID_LEN; j++) {
+                A_PRINTF("%2.2x", pmkidList->pmkid[j]);
+            }
+        pmkidList++;
+    }
+}
+
+#ifdef USER_KEYS
+static A_STATUS
+
+ar6000_reinstall_keys(AR_SOFTC_T *ar, A_UINT8 key_op_ctrl)
+{
+    A_STATUS status = A_OK;
+    struct ieee80211req_key *uik = &ar->user_saved_keys.ucast_ik;
+    struct ieee80211req_key *bik = &ar->user_saved_keys.bcast_ik;
+    CRYPTO_TYPE  keyType = ar->user_saved_keys.keyType;
+
+    if (IEEE80211_CIPHER_CCKM_KRK != uik->ik_type) {
+        if (NONE_CRYPT == keyType) {
+            goto _reinstall_keys_out;
+        }
+
+        if (uik->ik_keylen) {
+            status = wmi_addKey_cmd(ar->arWmi, uik->ik_keyix,
+                    ar->user_saved_keys.keyType, PAIRWISE_USAGE,
+                    uik->ik_keylen, (A_UINT8 *)&uik->ik_keyrsc,
+                    uik->ik_keydata, key_op_ctrl, SYNC_BEFORE_WMIFLAG);
+        }
+
+    } else {
+        status = wmi_add_krk_cmd(ar->arWmi, uik->ik_keydata);
+    }
+
+    if (IEEE80211_CIPHER_CCKM_KRK != bik->ik_type) {
+        if (NONE_CRYPT == keyType) {
+            goto _reinstall_keys_out;
+        }
+
+        if (bik->ik_keylen) {
+            status = wmi_addKey_cmd(ar->arWmi, bik->ik_keyix,
+                    ar->user_saved_keys.keyType, GROUP_USAGE,
+                    bik->ik_keylen, (A_UINT8 *)&bik->ik_keyrsc,
+                    bik->ik_keydata, key_op_ctrl, NO_SYNC_WMIFLAG);
+        }
+    } else {
+        status = wmi_add_krk_cmd(ar->arWmi, bik->ik_keydata);
+    }
+
+_reinstall_keys_out:
+    ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
+    ar->user_key_ctrl      = 0;
+
+    return status;
+}
+#endif /* USER_KEYS */
+
+
+void
+ar6000_dset_open_req(
+    void *context,
+    A_UINT32 id,
+    A_UINT32 targHandle,
+    A_UINT32 targReplyFn,
+    A_UINT32 targReplyArg)
+{
+}
+
+void
+ar6000_dset_close(
+    void *context,
+    A_UINT32 access_cookie)
+{
+    return;
+}
+
+void
+ar6000_dset_data_req(
+   void *context,
+   A_UINT32 accessCookie,
+   A_UINT32 offset,
+   A_UINT32 length,
+   A_UINT32 targBuf,
+   A_UINT32 targReplyFn,
+   A_UINT32 targReplyArg)
+{
+}
diff --git a/drivers/ar6000/ar6000/ar6000_drv.h b/drivers/ar6000/ar6000/ar6000_drv.h
new file mode 100644
index 00000000000..784f158d9c4
--- /dev/null
+++ b/drivers/ar6000/ar6000/ar6000_drv.h
@@ -0,0 +1,360 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _AR6000_H_
+#define _AR6000_H_
+
+#include <linux/version.h>
+
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/if_ether.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <net/iw_handler.h>
+#include <linux/if_arp.h>
+#include <linux/ip.h>
+#include <linux/semaphore.h>
+#include <linux/wireless.h>
+#include <linux/module.h>
+#include <asm/io.h>
+
+#include <a_config.h>
+#include <athdefs.h>
+#include "a_types.h"
+#include "a_osapi.h"
+#include "htc_api.h"
+#include "wmi.h"
+#include "a_drv.h"
+#include "bmi.h"
+#include <ieee80211.h>
+#include <ieee80211_ioctl.h>
+#include <wlan_api.h>
+#include <wmi_api.h>
+#include "gpio_api.h"
+#include "gpio.h"
+#include <host_version.h>
+#include <linux/rtnetlink.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include "AR6Khwreg.h"
+#include "ar6000_api.h"
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+#include <testcmd.h>
+#endif
+
+#include "targaddrs.h"
+#include "dbglog_api.h"
+#include "ar6000_diag.h"
+#include "common_drv.h"
+
+#ifndef  __dev_put
+#define  __dev_put(dev) dev_put(dev)
+#endif
+
+#ifdef USER_KEYS
+
+#define USER_SAVEDKEYS_STAT_INIT     0
+#define USER_SAVEDKEYS_STAT_RUN      1
+
+// TODO this needs to move into the AR_SOFTC struct
+struct USER_SAVEDKEYS {
+    struct ieee80211req_key   ucast_ik;
+    struct ieee80211req_key   bcast_ik;
+    CRYPTO_TYPE               keyType;
+    A_BOOL                    keyOk;
+};
+#endif
+
+#define DBG_INFO		0x00000001
+#define DBG_ERROR		0x00000002
+#define DBG_WARNING		0x00000004
+#define DBG_SDIO		0x00000008
+#define DBG_HIF			0x00000010
+#define DBG_HTC			0x00000020
+#define DBG_WMI			0x00000040
+#define DBG_WMI2		0x00000080
+#define DBG_DRIVER		0x00000100
+
+#define DBG_DEFAULTS	(DBG_ERROR|DBG_WARNING)
+
+
+#ifdef DEBUG
+#define AR_DEBUG_PRINTF(args...)        if (debugdriver) A_PRINTF(args);
+#define AR_DEBUG2_PRINTF(args...)        if (debugdriver >= 2) A_PRINTF(args);
+extern int debugdriver;
+#else
+#define AR_DEBUG_PRINTF(args...)
+#define AR_DEBUG2_PRINTF(args...)
+#endif
+
+A_STATUS ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+A_STATUS ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define	MAX_AR6000                        1
+#define AR6000_MAX_RX_BUFFERS             16
+#define AR6000_BUFFER_SIZE                1664
+#define AR6000_TX_TIMEOUT                 10
+#define	AR6000_ETH_ADDR_LEN               6
+#define	AR6000_MAX_ENDPOINTS              4
+#define MAX_NODE_NUM                      15
+#define MAX_COOKIE_NUM                    150
+#define AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT        1
+#define AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT  1
+
+enum {
+    DRV_HB_CHALLENGE = 0,
+    APP_HB_CHALLENGE
+};
+
+/* HTC RAW streams */
+typedef enum _HTC_RAW_STREAM_ID {
+    HTC_RAW_STREAM_NOT_MAPPED = -1,
+    HTC_RAW_STREAM_0 = 0,
+    HTC_RAW_STREAM_1 = 1,
+    HTC_RAW_STREAM_2 = 2,
+    HTC_RAW_STREAM_3 = 3,
+    HTC_RAW_STREAM_NUM_MAX
+} HTC_RAW_STREAM_ID;
+
+#define RAW_HTC_READ_BUFFERS_NUM    4
+#define RAW_HTC_WRITE_BUFFERS_NUM   4
+
+typedef struct {
+    int currPtr;
+    int length;
+    unsigned char data[AR6000_BUFFER_SIZE];
+    HTC_PACKET    HTCPacket;
+} raw_htc_buffer;
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+/*
+ *  add TCMD_MODE besides wmi and bypasswmi
+ *  in TCMD_MODE, only few TCMD releated wmi commands
+ *  counld be hanlder
+ */
+enum {
+    AR6000_WMI_MODE = 0,
+    AR6000_BYPASS_MODE,
+    AR6000_TCMD_MODE,
+    AR6000_WLAN_MODE
+};
+#endif /* CONFIG_HOST_TCMD_SUPPORT */
+
+struct ar_wep_key {
+    A_UINT8                 arKeyIndex;
+    A_UINT8                 arKeyLen;
+    A_UINT8                 arKey[64];
+} ;
+
+struct ar_node_mapping {
+    A_UINT8                 macAddress[6];
+    A_UINT8                 epId;
+    A_UINT8                 txPending;
+};
+
+struct ar_cookie {
+    A_UINT32               arc_bp[2];    /* Must be first field */
+    HTC_PACKET             HtcPkt;       /* HTC packet wrapper */
+    struct ar_cookie *arc_list_next;
+};
+
+struct ar_hb_chlng_resp {
+    A_TIMER                 timer;
+    A_UINT32                frequency;
+    A_UINT32                seqNum;
+    A_BOOL                  outstanding;
+    A_UINT8                 missCnt;
+    A_UINT8                 missThres;
+};
+
+typedef struct ar6_softc {
+    struct net_device       *arNetDev;    /* net_device pointer */
+    void                    *arWmi;
+    int                     arTxPending[WMI_PRI_MAX_COUNT];
+    int                     arTotalTxDataPending;
+    A_UINT8                 arNumDataEndPts;
+    A_BOOL                  arWmiEnabled;
+    A_BOOL                  arWmiReady;
+    A_BOOL                  arConnected;
+    A_BOOL                  arRadioSwitch;
+    HTC_HANDLE              arHtcTarget;
+    void                    *arHifDevice;
+    spinlock_t              arLock;
+    struct semaphore        arSem;
+    int                     arRxBuffers[WMI_PRI_MAX_COUNT];
+    int                     arSsidLen;
+    u_char                  arSsid[32];
+    A_UINT8                 arNetworkType;
+    A_UINT8                 arDot11AuthMode;
+    A_UINT8                 arAuthMode;
+    A_UINT8                 arPairwiseCrypto;
+    A_UINT8                 arPairwiseCryptoLen;
+    A_UINT8                 arGroupCrypto;
+    A_UINT8                 arGroupCryptoLen;
+    A_UINT8                 arDefTxKeyIndex;
+    struct ar_wep_key       arWepKeyList[WMI_MAX_KEY_INDEX + 1];
+    A_UINT8                 arBssid[6];
+    A_UINT8                 arReqBssid[6];
+    A_UINT16                arChannelHint;
+    A_UINT16                arBssChannel;
+    A_UINT16                arListenInterval;
+    struct ar6000_version   arVersion;
+    A_UINT32                arTargetType;
+    A_INT8                  arRssi;
+    A_UINT8                 arTxPwr;
+    A_BOOL                  arTxPwrSet;
+    A_INT32                 arBitRate;
+    struct net_device_stats arNetStats;
+    struct iw_statistics 	arIwStats;
+    A_INT8                  arNumChannels;
+    A_UINT16                arChannelList[32];
+    A_UINT32                arRegCode;
+    A_BOOL                  statsUpdatePending;
+    TARGET_STATS            arTargetStats;
+    A_INT8                  arMaxRetries;
+    A_UINT8                 arPhyCapability;
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+    A_UINT8                 tcmdRxReport;
+    A_UINT32                tcmdRxTotalPkt;
+    A_INT32                 tcmdRxRssi;
+    A_UINT32                tcmdPm;
+   A_UINT32                 arTargetMode;
+#endif
+    AR6000_WLAN_STATE       arWlanState;
+    struct ar_node_mapping  arNodeMap[MAX_NODE_NUM];
+    A_UINT8                 arIbssPsEnable;
+    A_UINT8                 arNodeNum;
+    A_UINT8                 arNexEpId;
+    struct ar_cookie        *arCookieList;
+    A_UINT16                arRateMask;
+    A_UINT8                 arSkipScan;
+    A_UINT16                arBeaconInterval;
+    A_BOOL                  arConnectPending;
+    A_BOOL                  arWmmEnabled;
+    struct ar_hb_chlng_resp arHBChallengeResp;
+    A_UINT8                 arKeepaliveConfigured;
+    A_UINT32                arMgmtFilter;
+    HTC_ENDPOINT_ID         arWmi2EpMapping[WMI_PRI_MAX_COUNT];
+    WMI_PRI_STREAM_ID       arEp2WmiMapping[ENDPOINT_MAX];
+#ifdef HTC_RAW_INTERFACE
+    HTC_ENDPOINT_ID         arRaw2EpMapping[HTC_RAW_STREAM_NUM_MAX];
+    HTC_RAW_STREAM_ID       arEp2RawMapping[ENDPOINT_MAX];
+    struct semaphore        raw_htc_read_sem[HTC_RAW_STREAM_NUM_MAX];
+    struct semaphore        raw_htc_write_sem[HTC_RAW_STREAM_NUM_MAX];
+    wait_queue_head_t       raw_htc_read_queue[HTC_RAW_STREAM_NUM_MAX];
+    wait_queue_head_t       raw_htc_write_queue[HTC_RAW_STREAM_NUM_MAX];
+    raw_htc_buffer          *raw_htc_read_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_READ_BUFFERS_NUM];
+    raw_htc_buffer          *raw_htc_write_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_WRITE_BUFFERS_NUM];
+    A_BOOL                  write_buffer_available[HTC_RAW_STREAM_NUM_MAX];
+    A_BOOL                  read_buffer_available[HTC_RAW_STREAM_NUM_MAX];
+#endif
+    A_BOOL                  arRawIfInit;
+    int                     arDeviceIndex;
+    COMMON_CREDIT_STATE_INFO arCreditStateInfo;
+    A_BOOL                  arWMIControlEpFull;
+    A_BOOL                  dbgLogFetchInProgress;
+    A_UCHAR                 log_buffer[DBGLOG_HOST_LOG_BUFFER_SIZE];
+    A_UINT32                log_cnt;
+    A_UINT32                dbglog_init_done;
+    A_UINT32                arConnectCtrlFlags;
+	A_UINT32                scan_complete;
+#ifdef USER_KEYS
+    A_INT32                 user_savedkeys_stat;
+    A_UINT32                user_key_ctrl;
+    struct USER_SAVEDKEYS   user_saved_keys;
+#endif
+} AR_SOFTC_T;
+
+
+#define arWMIStream2EndpointID(ar,wmi)          (ar)->arWmi2EpMapping[(wmi)]
+#define arSetWMIStream2EndpointIDMap(ar,wmi,ep)  \
+{  (ar)->arWmi2EpMapping[(wmi)] = (ep); \
+   (ar)->arEp2WmiMapping[(ep)] = (wmi); }
+#define arEndpoint2WMIStreamID(ar,ep)           (ar)->arEp2WmiMapping[(ep)]
+
+#define arRawIfEnabled(ar) (ar)->arRawIfInit
+#define arRawStream2EndpointID(ar,raw)          (ar)->arRaw2EpMapping[(raw)]
+#define arSetRawStream2EndpointIDMap(ar,raw,ep)  \
+{  (ar)->arRaw2EpMapping[(raw)] = (ep); \
+   (ar)->arEp2RawMapping[(ep)] = (raw); }
+#define arEndpoint2RawStreamID(ar,ep)           (ar)->arEp2RawMapping[(ep)]
+
+struct ar_giwscan_param {
+    char    *current_ev;
+    char    *end_buf;
+    A_BOOL  firstPass;
+};
+
+#define AR6000_STAT_INC(ar, stat)       (ar->arNetStats.stat++)
+
+#define AR6000_SPIN_LOCK(lock, param)   do {                            \
+    if (irqs_disabled()) {                                              \
+        AR_DEBUG_PRINTF("IRQs disabled:AR6000_LOCK\n");                 \
+    }                                                                   \
+    spin_lock_bh(lock);                                                 \
+} while (0)
+
+#define AR6000_SPIN_UNLOCK(lock, param) do {                            \
+    if (irqs_disabled()) {                                              \
+        AR_DEBUG_PRINTF("IRQs disabled: AR6000_UNLOCK\n");              \
+    }                                                                   \
+    spin_unlock_bh(lock);                                               \
+} while (0)
+
+int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+int ar6000_ioctl_dispatcher(struct net_device *dev, struct ifreq *rq, int cmd);
+void ar6000_ioctl_iwsetup(struct iw_handler_def *def);
+void ar6000_gpio_init(void);
+void ar6000_init_profile_info(AR_SOFTC_T *ar);
+void ar6000_install_static_wep_keys(AR_SOFTC_T *ar);
+int ar6000_init(struct net_device *dev);
+int ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar);
+A_STATUS ar6000_SetHTCBlockSize(AR_SOFTC_T *ar);
+
+#ifdef HTC_RAW_INTERFACE
+
+#ifndef __user
+#define __user
+#endif
+
+int ar6000_htc_raw_open(AR_SOFTC_T *ar);
+int ar6000_htc_raw_close(AR_SOFTC_T *ar);
+ssize_t ar6000_htc_raw_read(AR_SOFTC_T *ar,
+                            HTC_RAW_STREAM_ID StreamID,
+                            char __user *buffer, size_t count);
+ssize_t ar6000_htc_raw_write(AR_SOFTC_T *ar,
+                             HTC_RAW_STREAM_ID StreamID,
+                             char __user *buffer, size_t count);
+
+#endif /* HTC_RAW_INTERFACE */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _AR6000_H_ */
diff --git a/drivers/ar6000/ar6000/ar6000_raw_if.c b/drivers/ar6000/ar6000/ar6000_raw_if.c
new file mode 100644
index 00000000000..4443bb26733
--- /dev/null
+++ b/drivers/ar6000/ar6000/ar6000_raw_if.c
@@ -0,0 +1,440 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "ar6000_drv.h"
+
+#ifdef HTC_RAW_INTERFACE
+
+static void
+ar6000_htc_raw_read_cb(void *Context, HTC_PACKET *pPacket)
+{
+    AR_SOFTC_T        *ar = (AR_SOFTC_T *)Context;
+    raw_htc_buffer    *busy;
+    HTC_RAW_STREAM_ID streamID;
+
+    busy = (raw_htc_buffer *)pPacket->pPktContext;
+    A_ASSERT(busy != NULL);
+
+    if (pPacket->Status == A_ECANCELED) {
+        /*
+         * HTC provides A_ECANCELED status when it doesn't want to be refilled
+         * (probably due to a shutdown)
+         */
+        return;
+    }
+
+    streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint);
+    A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED);
+
+#ifdef CF
+   if (down_trylock(&ar->raw_htc_read_sem[streamID])) {
+#else
+    if (down_interruptible(&ar->raw_htc_read_sem[streamID])) {
+#endif /* CF */
+        AR_DEBUG2_PRINTF("Unable to down the semaphore\n");
+    }
+
+    A_ASSERT((pPacket->Status != A_OK) ||
+             (pPacket->pBuffer == (busy->data + HTC_HEADER_LEN)));
+
+    busy->length = pPacket->ActualLength + HTC_HEADER_LEN;
+    busy->currPtr = HTC_HEADER_LEN;
+    ar->read_buffer_available[streamID] = TRUE;
+    //AR_DEBUG_PRINTF("raw read cb:  0x%X 0x%X \n", busy->currPtr,busy->length);
+    up(&ar->raw_htc_read_sem[streamID]);
+
+    /* Signal the waiting process */
+    AR_DEBUG2_PRINTF("Waking up the StreamID(%d) read process\n", streamID);
+    wake_up_interruptible(&ar->raw_htc_read_queue[streamID]);
+}
+
+static void
+ar6000_htc_raw_write_cb(void *Context, HTC_PACKET *pPacket)
+{
+    AR_SOFTC_T          *ar = (AR_SOFTC_T  *)Context;
+    raw_htc_buffer      *free;
+    HTC_RAW_STREAM_ID   streamID;
+
+    free = (raw_htc_buffer *)pPacket->pPktContext;
+    A_ASSERT(free != NULL);
+
+    if (pPacket->Status == A_ECANCELED) {
+        /*
+         * HTC provides A_ECANCELED status when it doesn't want to be refilled
+         * (probably due to a shutdown)
+         */
+        return;
+    }
+
+    streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint);
+    A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED);
+
+#ifdef CF
+    if (down_trylock(&ar->raw_htc_write_sem[streamID])) {
+#else
+    if (down_interruptible(&ar->raw_htc_write_sem[streamID])) {
+#endif
+        AR_DEBUG2_PRINTF("Unable to down the semaphore\n");
+    }
+
+    A_ASSERT(pPacket->pBuffer == (free->data + HTC_HEADER_LEN));
+
+    free->length = 0;
+    ar->write_buffer_available[streamID] = TRUE;
+    up(&ar->raw_htc_write_sem[streamID]);
+
+    /* Signal the waiting process */
+    AR_DEBUG2_PRINTF("Waking up the StreamID(%d) write process\n", streamID);
+    wake_up_interruptible(&ar->raw_htc_write_queue[streamID]);
+}
+
+/* connect to a service */
+static A_STATUS ar6000_connect_raw_service(AR_SOFTC_T        *ar,
+                                           HTC_RAW_STREAM_ID StreamID)
+{
+    A_STATUS                 status;
+    HTC_SERVICE_CONNECT_RESP response;
+    A_UINT8                  streamNo;
+    HTC_SERVICE_CONNECT_REQ  connect;
+
+    do {
+
+        A_MEMZERO(&connect,sizeof(connect));
+            /* pass the stream ID as meta data to the RAW streams service */
+        streamNo = (A_UINT8)StreamID;
+        connect.pMetaData = &streamNo;
+        connect.MetaDataLength = sizeof(A_UINT8);
+            /* these fields are the same for all endpoints */
+        connect.EpCallbacks.pContext = ar;
+        connect.EpCallbacks.EpTxComplete = ar6000_htc_raw_write_cb;
+        connect.EpCallbacks.EpRecv = ar6000_htc_raw_read_cb;
+            /* simple interface, we don't need these optional callbacks */
+        connect.EpCallbacks.EpRecvRefill = NULL;
+        connect.EpCallbacks.EpSendFull = NULL;
+        connect.EpCallbacks.EpSendAvail = NULL;
+        connect.MaxSendQueueDepth = RAW_HTC_WRITE_BUFFERS_NUM;
+
+            /* connect to the raw streams service, we may be able to get 1 or more
+             * connections, depending on WHAT is running on the target */
+        connect.ServiceID = HTC_RAW_STREAMS_SVC;
+
+        A_MEMZERO(&response,sizeof(response));
+
+            /* try to connect to the raw stream, it is okay if this fails with
+             * status HTC_SERVICE_NO_MORE_EP */
+        status = HTCConnectService(ar->arHtcTarget,
+                                   &connect,
+                                   &response);
+
+        if (A_FAILED(status)) {
+            if (response.ConnectRespCode == HTC_SERVICE_NO_MORE_EP) {
+                AR_DEBUG_PRINTF("HTC RAW , No more streams allowed \n");
+                status = A_OK;
+            }
+            break;
+        }
+
+            /* set endpoint mapping for the RAW HTC streams */
+        arSetRawStream2EndpointIDMap(ar,StreamID,response.Endpoint);
+
+        AR_DEBUG_PRINTF("HTC RAW : stream ID: %d, endpoint: %d\n",
+                        StreamID, arRawStream2EndpointID(ar,StreamID));
+
+    } while (FALSE);
+
+    return status;
+}
+
+int ar6000_htc_raw_open(AR_SOFTC_T *ar)
+{
+    A_STATUS status;
+    int streamID, endPt, count2;
+    raw_htc_buffer *buffer;
+    HTC_SERVICE_ID servicepriority;
+
+    A_ASSERT(ar->arHtcTarget != NULL);
+
+        /* wait for target */
+    status = HTCWaitTarget(ar->arHtcTarget);
+
+    if (A_FAILED(status)) {
+        AR_DEBUG_PRINTF("HTCWaitTarget failed (%d)\n", status);
+        return -ENODEV;
+    }
+
+    for (endPt = 0; endPt < ENDPOINT_MAX; endPt++) {
+        ar->arEp2RawMapping[endPt] = HTC_RAW_STREAM_NOT_MAPPED;
+    }
+
+    for (streamID = HTC_RAW_STREAM_0; streamID < HTC_RAW_STREAM_NUM_MAX; streamID++) {
+        /* Initialize the data structures */
+        init_MUTEX(&ar->raw_htc_read_sem[streamID]);
+        init_MUTEX(&ar->raw_htc_write_sem[streamID]);
+        init_waitqueue_head(&ar->raw_htc_read_queue[streamID]);
+        init_waitqueue_head(&ar->raw_htc_write_queue[streamID]);
+
+            /* try to connect to the raw service */
+        status = ar6000_connect_raw_service(ar,streamID);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        if (arRawStream2EndpointID(ar,streamID) == 0) {
+            break;
+        }
+
+        for (count2 = 0; count2 < RAW_HTC_READ_BUFFERS_NUM; count2 ++) {
+            /* Initialize the receive buffers */
+            buffer = ar->raw_htc_write_buffer[streamID][count2];
+            memset(buffer, 0, sizeof(raw_htc_buffer));
+            buffer = ar->raw_htc_read_buffer[streamID][count2];
+            memset(buffer, 0, sizeof(raw_htc_buffer));
+
+            SET_HTC_PACKET_INFO_RX_REFILL(&buffer->HTCPacket,
+                                          buffer,
+                                          buffer->data,
+                                          AR6000_BUFFER_SIZE,
+                                          arRawStream2EndpointID(ar,streamID));
+
+            /* Queue buffers to HTC for receive */
+            if ((status = HTCAddReceivePkt(ar->arHtcTarget, &buffer->HTCPacket)) != A_OK)
+            {
+                BMIInit();
+                return -EIO;
+            }
+        }
+
+        for (count2 = 0; count2 < RAW_HTC_WRITE_BUFFERS_NUM; count2 ++) {
+            /* Initialize the receive buffers */
+            buffer = ar->raw_htc_write_buffer[streamID][count2];
+            memset(buffer, 0, sizeof(raw_htc_buffer));
+        }
+
+        ar->read_buffer_available[streamID] = FALSE;
+        ar->write_buffer_available[streamID] = TRUE;
+    }
+
+    if (A_FAILED(status)) {
+        return -EIO;
+    }
+
+    AR_DEBUG_PRINTF("HTC RAW, number of streams the target supports: %d \n", streamID);
+
+    servicepriority = HTC_RAW_STREAMS_SVC;  /* only 1 */
+
+        /* set callbacks and priority list */
+    HTCSetCreditDistribution(ar->arHtcTarget,
+                             ar,
+                             NULL,  /* use default */
+                             NULL,  /* use default */
+                             &servicepriority,
+                             1);
+
+    /* Start the HTC component */
+    if ((status = HTCStart(ar->arHtcTarget)) != A_OK) {
+        BMIInit();
+        return -EIO;
+    }
+
+    (ar)->arRawIfInit = TRUE;
+
+    return 0;
+}
+
+int ar6000_htc_raw_close(AR_SOFTC_T *ar)
+{
+    A_PRINTF("ar6000_htc_raw_close called \n");
+    HTCStop(ar->arHtcTarget);
+
+        /* reset the device */
+    ar6000_reset_device(ar->arHifDevice, ar->arTargetType);
+    /* Initialize the BMI component */
+    BMIInit();
+
+    return 0;
+}
+
+raw_htc_buffer *
+get_filled_buffer(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID)
+{
+    int count;
+    raw_htc_buffer *busy;
+
+    /* Check for data */
+    for (count = 0; count < RAW_HTC_READ_BUFFERS_NUM; count ++) {
+        busy = ar->raw_htc_read_buffer[StreamID][count];
+        if (busy->length) {
+            break;
+        }
+    }
+    if (busy->length) {
+        ar->read_buffer_available[StreamID] = TRUE;
+    } else {
+        ar->read_buffer_available[StreamID] = FALSE;
+    }
+
+    return busy;
+}
+
+ssize_t ar6000_htc_raw_read(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID,
+                            char __user *buffer, size_t length)
+{
+    int readPtr;
+    raw_htc_buffer *busy;
+
+    if (arRawStream2EndpointID(ar,StreamID) == 0) {
+        AR_DEBUG_PRINTF("StreamID(%d) not connected! \n", StreamID);
+        return -EFAULT;
+    }
+
+    if (down_interruptible(&ar->raw_htc_read_sem[StreamID])) {
+        return -ERESTARTSYS;
+    }
+
+    busy = get_filled_buffer(ar,StreamID);
+    while (!ar->read_buffer_available[StreamID]) {
+        up(&ar->raw_htc_read_sem[StreamID]);
+
+        /* Wait for the data */
+        AR_DEBUG2_PRINTF("Sleeping StreamID(%d) read process\n", StreamID);
+        if (wait_event_interruptible(ar->raw_htc_read_queue[StreamID],
+                                     ar->read_buffer_available[StreamID]))
+        {
+            return -EINTR;
+        }
+        if (down_interruptible(&ar->raw_htc_read_sem[StreamID])) {
+            return -ERESTARTSYS;
+        }
+        busy = get_filled_buffer(ar,StreamID);
+    }
+
+    /* Read the data */
+    readPtr = busy->currPtr;
+    if (length > busy->length - HTC_HEADER_LEN) {
+        length = busy->length - HTC_HEADER_LEN;
+    }
+    if (copy_to_user(buffer, &busy->data[readPtr], length)) {
+        up(&ar->raw_htc_read_sem[StreamID]);
+        return -EFAULT;
+    }
+
+    busy->currPtr += length;
+
+    //AR_DEBUG_PRINTF("raw read ioctl:  currPTR : 0x%X 0x%X \n", busy->currPtr,busy->length);
+
+    if (busy->currPtr == busy->length)
+    {
+        busy->currPtr = 0;
+        busy->length = 0;
+        HTC_PACKET_RESET_RX(&busy->HTCPacket);
+        //AR_DEBUG_PRINTF("raw read ioctl:  ep for packet:%d \n", busy->HTCPacket.Endpoint);
+        HTCAddReceivePkt(ar->arHtcTarget, &busy->HTCPacket);
+    }
+    ar->read_buffer_available[StreamID] = FALSE;
+    up(&ar->raw_htc_read_sem[StreamID]);
+
+    return length;
+}
+
+static raw_htc_buffer *
+get_free_buffer(AR_SOFTC_T *ar, HTC_ENDPOINT_ID StreamID)
+{
+    int count;
+    raw_htc_buffer *free;
+
+    free = NULL;
+    for (count = 0; count < RAW_HTC_WRITE_BUFFERS_NUM; count ++) {
+        free = ar->raw_htc_write_buffer[StreamID][count];
+        if (free->length == 0) {
+            break;
+        }
+    }
+    if (!free->length) {
+        ar->write_buffer_available[StreamID] = TRUE;
+    } else {
+        ar->write_buffer_available[StreamID] = FALSE;
+    }
+
+    return free;
+}
+
+ssize_t ar6000_htc_raw_write(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID,
+                     char __user *buffer, size_t length)
+{
+    int writePtr;
+    raw_htc_buffer *free;
+
+    if (arRawStream2EndpointID(ar,StreamID) == 0) {
+        AR_DEBUG_PRINTF("StreamID(%d) not connected! \n", StreamID);
+        return -EFAULT;
+    }
+
+    if (down_interruptible(&ar->raw_htc_write_sem[StreamID])) {
+        return -ERESTARTSYS;
+    }
+
+    /* Search for a free buffer */
+    free = get_free_buffer(ar,StreamID);
+
+    /* Check if there is space to write else wait */
+    while (!ar->write_buffer_available[StreamID]) {
+        up(&ar->raw_htc_write_sem[StreamID]);
+
+        /* Wait for buffer to become free */
+        AR_DEBUG2_PRINTF("Sleeping StreamID(%d) write process\n", StreamID);
+        if (wait_event_interruptible(ar->raw_htc_write_queue[StreamID],
+                                     ar->write_buffer_available[StreamID]))
+        {
+            return -EINTR;
+        }
+        if (down_interruptible(&ar->raw_htc_write_sem[StreamID])) {
+            return -ERESTARTSYS;
+        }
+        free = get_free_buffer(ar,StreamID);
+    }
+
+    /* Send the data */
+    writePtr = HTC_HEADER_LEN;
+    if (length > (AR6000_BUFFER_SIZE - HTC_HEADER_LEN)) {
+        length = AR6000_BUFFER_SIZE - HTC_HEADER_LEN;
+    }
+
+    if (copy_from_user(&free->data[writePtr], buffer, length)) {
+        up(&ar->raw_htc_read_sem[StreamID]);
+        return -EFAULT;
+    }
+
+    free->length = length;
+
+    SET_HTC_PACKET_INFO_TX(&free->HTCPacket,
+                           free,
+                           &free->data[writePtr],
+                           length,
+                           arRawStream2EndpointID(ar,StreamID),
+                           AR6K_DATA_PKT_TAG);
+
+    HTCSendPkt(ar->arHtcTarget,&free->HTCPacket);
+
+    ar->write_buffer_available[StreamID] = FALSE;
+    up(&ar->raw_htc_write_sem[StreamID]);
+
+    return length;
+}
+#endif /* HTC_RAW_INTERFACE */
diff --git a/drivers/ar6000/ar6000/ar6xapi_linux.h b/drivers/ar6000/ar6000/ar6xapi_linux.h
new file mode 100644
index 00000000000..b8e6e096165
--- /dev/null
+++ b/drivers/ar6000/ar6000/ar6xapi_linux.h
@@ -0,0 +1,128 @@
+#ifndef _AR6XAPI_LINUX_H
+#define _AR6XAPI_LINUX_H
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct ar6_softc;
+
+void ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap);
+A_UINT8 ar6000_iptos_to_userPriority(A_UINT8 *pkt);
+A_STATUS ar6000_control_tx(void *devt, void *osbuf, WMI_PRI_STREAM_ID streamID);
+void ar6000_connect_event(struct ar6_softc *ar, A_UINT16 channel,
+                          A_UINT8 *bssid, A_UINT16 listenInterval,
+                          A_UINT16 beaconInterval, NETWORK_TYPE networkType,
+                          A_UINT8 beaconIeLen, A_UINT8 assocReqLen,
+                          A_UINT8 assocRespLen,A_UINT8 *assocInfo);
+void ar6000_disconnect_event(struct ar6_softc *ar, A_UINT8 reason,
+                             A_UINT8 *bssid, A_UINT8 assocRespLen,
+                             A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus);
+void ar6000_tkip_micerr_event(struct ar6_softc *ar, A_UINT8 keyid,
+                              A_BOOL ismcast);
+void ar6000_bitrate_rx(void *devt, A_INT32 rateKbps);
+void ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList);
+void ar6000_regDomain_event(struct ar6_softc *ar, A_UINT32 regCode);
+void ar6000_txPwr_rx(void *devt, A_UINT8 txPwr);
+void ar6000_keepalive_rx(void *devt, A_UINT8 configured);
+void ar6000_neighborReport_event(struct ar6_softc *ar, int numAps,
+                                 WMI_NEIGHBOR_INFO *info);
+void ar6000_set_numdataendpts(struct ar6_softc *ar, A_UINT32 num);
+void ar6000_scanComplete_event(struct ar6_softc *ar, A_STATUS status);
+void ar6000_targetStats_event(struct ar6_softc *ar,  WMI_TARGET_STATS *pStats);
+void ar6000_rssiThreshold_event(struct ar6_softc *ar,
+                                WMI_RSSI_THRESHOLD_VAL newThreshold,
+                                A_INT16 rssi);
+void ar6000_reportError_event(struct ar6_softc *, WMI_TARGET_ERROR_VAL errorVal);
+void ar6000_cac_event(struct ar6_softc *ar, A_UINT8 ac, A_UINT8 cac_indication,
+                                A_UINT8 statusCode, A_UINT8 *tspecSuggestion);
+void ar6000_hbChallengeResp_event(struct ar6_softc *, A_UINT32 cookie, A_UINT32 source);
+void
+ar6000_roam_tbl_event(struct ar6_softc *ar, WMI_TARGET_ROAM_TBL *pTbl);
+
+void
+ar6000_roam_data_event(struct ar6_softc *ar, WMI_TARGET_ROAM_DATA *p);
+
+void
+ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters,
+                      WMI_GET_WOW_LIST_REPLY *wow_reply);
+
+void ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID,
+                             WMI_PMKID *pmkidList);
+
+void ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values);
+void ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value);
+void ar6000_gpio_ack_rx(void);
+
+void ar6000_dbglog_init_done(struct ar6_softc *ar);
+
+#ifdef SEND_EVENT_TO_APP
+void ar6000_send_event_to_app(struct ar6_softc *ar, A_UINT16 eventId, A_UINT8 *datap, int len);
+#endif
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+void ar6000_tcmd_rx_report_event(void *devt, A_UINT8 * results, int len);
+#endif
+
+void ar6000_tx_retry_err_event(void *devt);
+
+void ar6000_snrThresholdEvent_rx(void *devt,
+                                 WMI_SNR_THRESHOLD_VAL newThreshold,
+                                 A_UINT8 snr);
+
+void ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL range, A_UINT8 lqVal);
+
+
+void ar6000_ratemask_rx(void *devt, A_UINT16 ratemask);
+
+A_STATUS ar6000_get_driver_cfg(struct net_device *dev,
+                                A_UINT16 cfgParam,
+                                void *result);
+void ar6000_bssInfo_event_rx(struct ar6_softc *ar, A_UINT8 *data, int len);
+
+void ar6000_dbglog_event(struct ar6_softc *ar, A_UINT32 dropped,
+                         A_INT8 *buffer, A_UINT32 length);
+
+int ar6000_dbglog_get_debug_logs(struct ar6_softc *ar);
+
+void ar6000_indicate_tx_activity(void *devt, A_UINT8 trafficClass, A_BOOL Active);
+
+void ar6000_dset_open_req(void *devt,
+                          A_UINT32 id,
+                          A_UINT32 targ_handle,
+                          A_UINT32 targ_reply_fn,
+                          A_UINT32 targ_reply_arg);
+void ar6000_dset_close(void *devt, A_UINT32 access_cookie);
+void ar6000_dset_data_req(void *devt,
+                          A_UINT32 access_cookie,
+                          A_UINT32 offset,
+                          A_UINT32 length,
+                          A_UINT32 targ_buf,
+                          A_UINT32 targ_reply_fn,
+                          A_UINT32 targ_reply_arg);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/drivers/ar6000/ar6000/athdrv_linux.h b/drivers/ar6000/ar6000/athdrv_linux.h
new file mode 100644
index 00000000000..9c3e449735f
--- /dev/null
+++ b/drivers/ar6000/ar6000/athdrv_linux.h
@@ -0,0 +1,993 @@
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _ATHDRV_LINUX_H
+#define _ATHDRV_LINUX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/*
+ * There are two types of ioctl's here: Standard ioctls and
+ * eXtended ioctls.  All extended ioctls (XIOCTL) are multiplexed
+ * off of the single ioctl command, AR6000_IOCTL_EXTENDED.  The
+ * arguments for every XIOCTL starts with a 32-bit command word
+ * that is used to select which extended ioctl is in use.  After
+ * the command word are command-specific arguments.
+ */
+
+/* Linux standard Wireless Extensions, private ioctl interfaces */
+#define IEEE80211_IOCTL_SETPARAM             (SIOCIWFIRSTPRIV+0)
+#define IEEE80211_IOCTL_GETPARAM             (SIOCIWFIRSTPRIV+1)
+#define IEEE80211_IOCTL_SETKEY               (SIOCIWFIRSTPRIV+2)
+#define IEEE80211_IOCTL_SETWMMPARAMS         (SIOCIWFIRSTPRIV+3)
+#define IEEE80211_IOCTL_DELKEY               (SIOCIWFIRSTPRIV+4)
+#define IEEE80211_IOCTL_GETWMMPARAMS         (SIOCIWFIRSTPRIV+5)
+#define IEEE80211_IOCTL_SETOPTIE             (SIOCIWFIRSTPRIV+6)
+#define IEEE80211_IOCTL_SETMLME              (SIOCIWFIRSTPRIV+7)
+//#define IEEE80211_IOCTL_GETOPTIE             (SIOCIWFIRSTPRIV+7)
+#define IEEE80211_IOCTL_ADDPMKID             (SIOCIWFIRSTPRIV+8)
+//#define IEEE80211_IOCTL_SETAUTHALG           (SIOCIWFIRSTPRIV+10)
+#define IEEE80211_IOCTL_LASTONE              (SIOCIWFIRSTPRIV+9)
+
+
+
+/*                      ====WMI Ioctls====                                    */
+/*
+ *
+ * Many ioctls simply provide WMI services to application code:
+ * an application makes such an ioctl call with a set of arguments
+ * that are packaged into the corresponding WMI message, and sent
+ * to the Target.
+ */
+
+#define AR6000_IOCTL_WMI_GETREV              (SIOCIWFIRSTPRIV+10)
+/*
+ * arguments:
+ *   ar6000_version *revision
+ */
+
+#define AR6000_IOCTL_WMI_SETPWR              (SIOCIWFIRSTPRIV+11)
+/*
+ * arguments:
+ *   WMI_POWER_MODE_CMD pwrModeCmd (see include/wmi.h)
+ * uses: WMI_SET_POWER_MODE_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SETSCAN             (SIOCIWFIRSTPRIV+12)
+/*
+ * arguments:
+ *   WMI_SCAN_PARAMS_CMD scanParams (see include/wmi.h)
+ * uses: WMI_SET_SCAN_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SETLISTENINT        (SIOCIWFIRSTPRIV+13)
+/*
+ * arguments:
+ *   UINT32 listenInterval
+ * uses: WMI_SET_LISTEN_INT_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SETBSSFILTER        (SIOCIWFIRSTPRIV+14)
+/*
+ * arguments:
+ *   WMI_BSS_FILTER filter (see include/wmi.h)
+ * uses: WMI_SET_BSS_FILTER_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_CHANNELPARAMS   (SIOCIWFIRSTPRIV+16)
+/*
+ * arguments:
+ *   WMI_CHANNEL_PARAMS_CMD chParams
+ * uses: WMI_SET_CHANNEL_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_PROBEDSSID      (SIOCIWFIRSTPRIV+17)
+/*
+ * arguments:
+ *   WMI_PROBED_SSID_CMD probedSsids (see include/wmi.h)
+ * uses: WMI_SETPROBED_SSID_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_PMPARAMS        (SIOCIWFIRSTPRIV+18)
+/*
+ * arguments:
+ *   WMI_POWER_PARAMS_CMD powerParams (see include/wmi.h)
+ * uses: WMI_SET_POWER_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_BADAP           (SIOCIWFIRSTPRIV+19)
+/*
+ * arguments:
+ *   WMI_ADD_BAD_AP_CMD badAPs (see include/wmi.h)
+ * uses: WMI_ADD_BAD_AP_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_GET_QOS_QUEUE       (SIOCIWFIRSTPRIV+20)
+/*
+ * arguments:
+ *   ar6000_queuereq queueRequest (see below)
+ */
+
+#define AR6000_IOCTL_WMI_CREATE_QOS          (SIOCIWFIRSTPRIV+21)
+/*
+ * arguments:
+ *   WMI_CREATE_PSTREAM createPstreamCmd (see include/wmi.h)
+ * uses: WMI_CREATE_PSTREAM_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_DELETE_QOS          (SIOCIWFIRSTPRIV+22)
+/*
+ * arguments:
+ *   WMI_DELETE_PSTREAM_CMD deletePstreamCmd (see include/wmi.h)
+ * uses: WMI_DELETE_PSTREAM_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_SNRTHRESHOLD   (SIOCIWFIRSTPRIV+23)
+/*
+ * arguments:
+ *   WMI_SNR_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
+ * uses: WMI_SNR_THRESHOLD_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK (SIOCIWFIRSTPRIV+24)
+/*
+ * arguments:
+ *   WMI_TARGET_ERROR_REPORT_BITMASK errorReportBitMask (see include/wmi.h)
+ * uses: WMI_TARGET_ERROR_REPORT_BITMASK_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_GET_TARGET_STATS    (SIOCIWFIRSTPRIV+25)
+/*
+ * arguments:
+ *   TARGET_STATS *targetStats (see below)
+ * uses: WMI_GET_STATISTICS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_ASSOC_INFO      (SIOCIWFIRSTPRIV+26)
+/*
+ * arguments:
+ *   WMI_SET_ASSOC_INFO_CMD setAssocInfoCmd
+ * uses: WMI_SET_ASSOC_INFO_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_ACCESS_PARAMS   (SIOCIWFIRSTPRIV+27)
+/*
+ * arguments:
+ *   WMI_SET_ACCESS_PARAMS_CMD setAccessParams (see include/wmi.h)
+ * uses: WMI_SET_ACCESS_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_BMISS_TIME      (SIOCIWFIRSTPRIV+28)
+/*
+ * arguments:
+ *   UINT32 beaconMissTime
+ * uses: WMI_SET_BMISS_TIME_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_DISC_TIMEOUT    (SIOCIWFIRSTPRIV+29)
+/*
+ * arguments:
+ *   WMI_DISC_TIMEOUT_CMD disconnectTimeoutCmd (see include/wmi.h)
+ * uses: WMI_SET_DISC_TIMEOUT_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS    (SIOCIWFIRSTPRIV+30)
+/*
+ * arguments:
+ *   WMI_IBSS_PM_CAPS_CMD ibssPowerMgmtCapsCmd
+ * uses: WMI_SET_IBSS_PM_CAPS_CMDID
+ */
+
+/*
+ * There is a very small space available for driver-private
+ * wireless ioctls.  In order to circumvent this limitation,
+ * we multiplex a bunch of ioctls (XIOCTLs) on top of a
+ * single AR6000_IOCTL_EXTENDED ioctl.
+ */
+#define AR6000_IOCTL_EXTENDED                (SIOCIWFIRSTPRIV+31)
+
+
+/*                         ====BMI Extended Ioctls====                        */
+
+#define AR6000_XIOCTL_BMI_DONE                                  1
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_DONE)
+ * uses: BMI_DONE
+ */
+
+#define AR6000_XIOCTL_BMI_READ_MEMORY                           2
+/*
+ * arguments:
+ *   union {
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_READ_MEMORY)
+ *       UINT32 address
+ *       UINT32 length
+ *     }
+ *     char results[length]
+ *   }
+ * uses: BMI_READ_MEMORY
+ */
+
+#define AR6000_XIOCTL_BMI_WRITE_MEMORY                          3
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_MEMORY)
+ *   UINT32 address
+ *   UINT32 length
+ *   char data[length]
+ * uses: BMI_WRITE_MEMORY
+ */
+
+#define AR6000_XIOCTL_BMI_EXECUTE                               4
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_EXECUTE)
+ *   UINT32 TargetAddress
+ *   UINT32 parameter
+ * uses: BMI_EXECUTE
+ */
+
+#define AR6000_XIOCTL_BMI_SET_APP_START                         5
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_SET_APP_START)
+ *   UINT32 TargetAddress
+ * uses: BMI_SET_APP_START
+ */
+
+#define AR6000_XIOCTL_BMI_READ_SOC_REGISTER                     6
+/*
+ * arguments:
+ *   union {
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_READ_SOC_REGISTER)
+ *       UINT32 TargetAddress, 32-bit aligned
+ *     }
+ *     UINT32 result
+ *   }
+ * uses: BMI_READ_SOC_REGISTER
+ */
+
+#define AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER                    7
+/*
+ * arguments:
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER)
+ *       UINT32 TargetAddress, 32-bit aligned
+ *       UINT32 newValue
+ *     }
+ * uses: BMI_WRITE_SOC_REGISTER
+ */
+
+#define AR6000_XIOCTL_BMI_TEST                                  8
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_TEST)
+ *   UINT32 address
+ *   UINT32 length
+ *   UINT32 count
+ */
+
+
+
+/* Historical Host-side DataSet support */
+#define AR6000_XIOCTL_UNUSED9                                   9
+#define AR6000_XIOCTL_UNUSED10                                  10
+#define AR6000_XIOCTL_UNUSED11                                  11
+
+/*                      ====Misc Extended Ioctls====                          */
+
+#define AR6000_XIOCTL_FORCE_TARGET_RESET                        12
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_FORCE_TARGET_RESET)
+ */
+
+
+#ifdef HTC_RAW_INTERFACE
+/* HTC Raw Interface Ioctls */
+#define AR6000_XIOCTL_HTC_RAW_OPEN                              13
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_OPEN)
+ */
+
+#define AR6000_XIOCTL_HTC_RAW_CLOSE                             14
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_CLOSE)
+ */
+
+#define AR6000_XIOCTL_HTC_RAW_READ                              15
+/*
+ * arguments:
+ *   union {
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_HTC_RAW_READ)
+ *       UINT32 mailboxID
+ *       UINT32 length
+ *     }
+ *     results[length]
+ *   }
+ */
+
+#define AR6000_XIOCTL_HTC_RAW_WRITE                             16
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_WRITE)
+ *   UINT32 mailboxID
+ *   UINT32 length
+ *   char buffer[length]
+ */
+#endif /* HTC_RAW_INTERFACE */
+
+#define AR6000_XIOCTL_CHECK_TARGET_READY                        17
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_CHECK_TARGET_READY)
+ */
+
+
+
+/*                ====GPIO (General Purpose I/O) Extended Ioctls====          */
+
+#define AR6000_XIOCTL_GPIO_OUTPUT_SET                           18
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_GPIO_OUTPUT_SET)
+ *   ar6000_gpio_output_set_cmd_s (see below)
+ * uses: WMIX_GPIO_OUTPUT_SET_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_INPUT_GET                            19
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_GPIO_INPUT_GET)
+ * uses: WMIX_GPIO_INPUT_GET_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_REGISTER_SET                         20
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_SET)
+ *   ar6000_gpio_register_cmd_s (see below)
+ * uses: WMIX_GPIO_REGISTER_SET_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_REGISTER_GET                         21
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_GET)
+ *   ar6000_gpio_register_cmd_s (see below)
+ * uses: WMIX_GPIO_REGISTER_GET_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_INTR_ACK                             22
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_ACK)
+ *   ar6000_cpio_intr_ack_cmd_s (see below)
+ * uses: WMIX_GPIO_INTR_ACK_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_INTR_WAIT                            23
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_WAIT)
+ */
+
+
+
+/*                    ====more wireless commands====                          */
+
+#define AR6000_XIOCTL_SET_ADHOC_BSSID                           24
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BSSID)
+ *   WMI_SET_ADHOC_BSSID_CMD setAdHocBssidCmd (see include/wmi.h)
+ */
+
+#define AR6000_XIOCTL_SET_OPT_MODE                              25
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_SET_OPT_MODE)
+ *   WMI_SET_OPT_MODE_CMD setOptModeCmd (see include/wmi.h)
+ * uses: WMI_SET_OPT_MODE_CMDID
+ */
+
+#define AR6000_XIOCTL_OPT_SEND_FRAME                            26
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_OPT_SEND_FRAME)
+ *   WMI_OPT_TX_FRAME_CMD optTxFrameCmd (see include/wmi.h)
+ * uses: WMI_OPT_TX_FRAME_CMDID
+ */
+
+#define AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL                   27
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL)
+ *   WMI_BEACON_INT_CMD beaconIntCmd (see include/wmi.h)
+ * uses: WMI_SET_BEACON_INT_CMDID
+ */
+
+
+#define IEEE80211_IOCTL_SETAUTHALG                              28
+
+
+#define AR6000_XIOCTL_SET_VOICE_PKT_SIZE                        29
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_SET_VOICE_PKT_SIZE)
+ *   WMI_SET_VOICE_PKT_SIZE_CMD setVoicePktSizeCmd (see include/wmi.h)
+ * uses: WMI_SET_VOICE_PKT_SIZE_CMDID
+ */
+
+
+#define AR6000_XIOCTL_SET_MAX_SP                                30
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_SET_MAX_SP)
+ *   WMI_SET_MAX_SP_LEN_CMD maxSPLen(see include/wmi.h)
+ * uses: WMI_SET_MAX_SP_LEN_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_GET_ROAM_TBL                          31
+
+#define AR6000_XIOCTL_WMI_SET_ROAM_CTRL                         32
+
+#define AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS                 33
+
+
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS)
+ *   WMI_SET_POWERSAVE_TIMERS_CMD powerSaveTimers(see include/wmi.h)
+ *   WMI_SET_POWERSAVE_TIMERS_CMDID
+ */
+
+#define AR6000_XIOCTRL_WMI_GET_POWER_MODE                        34
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTRL_WMI_GET_POWER_MODE)
+ */
+
+#define AR6000_XIOCTRL_WMI_SET_WLAN_STATE                       35
+typedef enum {
+    WLAN_DISABLED,
+    WLAN_ENABLED
+} AR6000_WLAN_STATE;
+/*
+ * arguments:
+ * enable/disable
+ */
+
+#define AR6000_XIOCTL_WMI_GET_ROAM_DATA                         36
+
+#define AR6000_XIOCTL_WMI_SETRETRYLIMITS                37
+/*
+ * arguments:
+ *   WMI_SET_RETRY_LIMITS_CMD ibssSetRetryLimitsCmd
+ * uses: WMI_SET_RETRY_LIMITS_CMDID
+ */
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+/*       ====extended commands for radio test ====                          */
+
+#define AR6000_XIOCTL_TCMD_CONT_TX                      38
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_TX)
+ *   WMI_TCMD_CONT_TX_CMD contTxCmd (see include/wmi.h)
+ * uses: WMI_TCMD_CONT_TX_CMDID
+ */
+
+#define AR6000_XIOCTL_TCMD_CONT_RX                      39
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_RX)
+ *   WMI_TCMD_CONT_RX_CMD rxCmd (see include/wmi.h)
+ * uses: WMI_TCMD_CONT_RX_CMDID
+ */
+
+#define AR6000_XIOCTL_TCMD_PM                           40
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_TCMD_PM)
+ *   WMI_TCMD_PM_CMD pmCmd (see include/wmi.h)
+ * uses: WMI_TCMD_PM_CMDID
+ */
+
+#endif /* CONFIG_HOST_TCMD_SUPPORT */
+
+#define AR6000_XIOCTL_WMI_STARTSCAN                     41
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_WMI_STARTSCAN)
+ *   UINT8  scanType
+ *   UINT8  scanConnected
+ *   A_BOOL forceFgScan
+ * uses: WMI_START_SCAN_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SETFIXRATES                   42
+
+#define AR6000_XIOCTL_WMI_GETFIXRATES                   43
+
+
+#define AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD             44
+/*
+ * arguments:
+ *   WMI_RSSI_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
+ * uses: WMI_RSSI_THRESHOLD_PARAMS_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_CLR_RSSISNR                   45
+/*
+ * arguments:
+ *   WMI_CLR_RSSISNR_CMD thresholdParams (see include/wmi.h)
+ * uses: WMI_CLR_RSSISNR_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SET_LQTHRESHOLD               46
+/*
+ * arguments:
+ *   WMI_LQ_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
+ * uses: WMI_LQ_THRESHOLD_PARAMS_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SET_RTS                        47
+/*
+ * arguments:
+ *   WMI_SET_RTS_MODE_CMD (see include/wmi.h)
+ * uses: WMI_SET_RTS_MODE_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SET_LPREAMBLE                 48
+
+#define AR6000_XIOCTL_WMI_SET_AUTHMODE                  49
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_WMI_SET_AUTHMODE)
+ *   UINT8  mode
+ * uses: WMI_SET_RECONNECT_AUTH_MODE_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SET_REASSOCMODE               50
+
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_WMI_SET_WMM)
+ *   UINT8  mode
+ * uses: WMI_SET_WMM_CMDID
+ */
+#define AR6000_XIOCTL_WMI_SET_WMM                       51
+
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS)
+ * UINT32 frequency
+ * UINT8  threshold
+ */
+#define AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS  52
+
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP)
+ * UINT32 cookie
+ */
+#define AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP         53
+
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_WMI_GET_RD)
+ *   UINT32 regDomain
+ */
+#define AR6000_XIOCTL_WMI_GET_RD                        54
+
+#define AR6000_XIOCTL_DIAG_READ                         55
+
+#define AR6000_XIOCTL_DIAG_WRITE                        56
+
+/*
+ * arguments cmd (AR6000_XIOCTL_SET_TXOP)
+ * WMI_TXOP_CFG  txopEnable
+ */
+#define AR6000_XIOCTL_WMI_SET_TXOP                      57
+
+#ifdef USER_KEYS
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_USER_SETKEYS)
+ * UINT32 keyOpCtrl
+ * uses AR6000_USER_SETKEYS_INFO
+ */
+#define AR6000_XIOCTL_USER_SETKEYS                      58
+#endif /* USER_KEYS */
+
+#define AR6000_XIOCTL_WMI_SET_KEEPALIVE                 59
+/*
+ * arguments:
+ *   UINT8 cmd (AR6000_XIOCTL_WMI_SET_KEEPALIVE)
+ *   UINT8 keepaliveInterval
+ * uses: WMI_SET_KEEPALIVE_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_GET_KEEPALIVE                 60
+/*
+ * arguments:
+ *   UINT8 cmd (AR6000_XIOCTL_WMI_GET_KEEPALIVE)
+ *   UINT8 keepaliveInterval
+ *   A_BOOL configured
+ * uses: WMI_GET_KEEPALIVE_CMDID
+ */
+
+/*               ====ROM Patching Extended Ioctls====                       */
+
+#define AR6000_XIOCTL_BMI_ROMPATCH_INSTALL              61
+/*
+ * arguments:
+ *     union {
+ *       struct {
+ *         UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_INSTALL)
+ *         UINT32 ROM Address
+ *         UINT32 RAM Address
+ *         UINT32 number of bytes
+ *         UINT32 activate? (0 or 1)
+ *       }
+ *       A_UINT32 resulting rompatch ID
+ *     }
+ * uses: BMI_ROMPATCH_INSTALL
+ */
+
+#define AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL            62
+/*
+ * arguments:
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL)
+ *       UINT32 rompatch ID
+ *     }
+ * uses: BMI_ROMPATCH_UNINSTALL
+ */
+
+#define AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE             63
+/*
+ * arguments:
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE)
+ *       UINT32 rompatch count
+ *       UINT32 rompatch IDs[rompatch count]
+ *     }
+ * uses: BMI_ROMPATCH_ACTIVATE
+ */
+
+#define AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE           64
+/*
+ * arguments:
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE)
+ *       UINT32 rompatch count
+ *       UINT32 rompatch IDs[rompatch count]
+ *     }
+ * uses: BMI_ROMPATCH_DEACTIVATE
+ */
+
+#define AR6000_XIOCTL_WMI_SET_APPIE             65
+/*
+ * arguments:
+ *      struct {
+ *          UINT32 cmd (AR6000_XIOCTL_WMI_SET_APPIE)
+ *          UINT32  app_frmtype;
+ *          UINT32  app_buflen;
+ *          UINT8   app_buf[];
+ *      }
+ */
+#define AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER    66
+/*
+ * arguments:
+ *      A_UINT32 filter_type;
+ */
+
+#define AR6000_XIOCTL_DBGLOG_CFG_MODULE             67
+
+#define AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS         68
+
+#define AR6000_XIOCTL_WMI_SET_WSC_STATUS    		70
+/*
+ * arguments:
+ *      A_UINT32 wsc_status;
+ *            (WSC_REG_INACTIVE or WSC_REG_ACTIVE)
+ */
+
+/*
+ * arguments:
+ *      struct {
+ *          A_UINT8 streamType;
+ *          A_UINT8 status;
+ *      }
+ * uses: WMI_SET_BT_STATUS_CMDID
+ */
+#define AR6000_XIOCTL_WMI_SET_BT_STATUS             71
+
+/*
+ * arguments:
+ *      struct {
+ *           A_UINT8 paramType;
+ *           union {
+ *               A_UINT8 noSCOPkts;
+ *               BT_PARAMS_A2DP a2dpParams;
+ *               BT_COEX_REGS regs;
+ *           };
+ *      }
+ * uses: WMI_SET_BT_PARAM_CMDID
+ */
+#define AR6000_XIOCTL_WMI_SET_BT_PARAMS             72
+
+#define AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE       73
+#define AR6000_XIOCTL_WMI_SET_WOW_MODE              74
+#define AR6000_XIOCTL_WMI_GET_WOW_LIST              75
+#define AR6000_XIOCTL_WMI_ADD_WOW_PATTERN           76
+#define AR6000_XIOCTL_WMI_DEL_WOW_PATTERN           77
+
+
+
+#define AR6000_XIOCTL_TARGET_INFO                   78
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_TARGET_INFO)
+ *   A_UINT32 TargetVersion (returned)
+ *   A_UINT32 TargetType    (returned)
+ * (See also bmi_msg.h target_ver and target_type)
+ */
+
+#define AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE         79
+/*
+ * arguments:
+ *      none
+ */
+
+#define AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE       80
+/*
+ * This ioctl is used to emulate traffic activity
+ * timeouts.  Activity/inactivity will trigger the driver
+ * to re-balance credits.
+ *
+ * arguments:
+ *      ar6000_traffic_activity_change
+ */
+
+#define AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS    81
+/*
+ * This ioctl is used to set the connect control flags
+ *
+ * arguments:
+ *      A_UINT32 connectCtrlFlags
+ */
+
+#define AR6000_XIOCTL_WMI_SET_AKMP_PARAMS              82
+/*
+ * This IOCTL sets any Authentication,Key Management and Protection
+ * related parameters. This is used along with the information set in
+ * Connect Command.
+ * Currently this enables Multiple PMKIDs to an AP.
+ *
+ * arguments:
+ *      struct {
+ *          A_UINT32    akmpInfo;
+ *      }
+ * uses: WMI_SET_AKMP_PARAMS_CMD
+ */
+
+#define AR6000_XIOCTL_WMI_GET_PMKID_LIST            83
+
+#define AR6000_XIOCTL_WMI_SET_PMKID_LIST            84
+/*
+ * This IOCTL is used to set a list of PMKIDs. This list of
+ * PMKIDs is used in the [Re]AssocReq Frame. This list is used
+ * only if the MultiPMKID option is enabled via the
+ * AR6000_XIOCTL_WMI_SET_AKMP_PARAMS  IOCTL.
+ *
+ * arguments:
+ *      struct {
+ *          A_UINT32    numPMKID;
+ *          WMI_PMKID   pmkidList[WMI_MAX_PMKID_CACHE];
+ *      }
+ * uses: WMI_SET_PMKIDLIST_CMD
+ */
+
+/* Historical DSETPATCH support for INI patches */
+#define AR6000_XIOCTL_UNUSED90                      90
+
+
+
+/* used by AR6000_IOCTL_WMI_GETREV */
+struct ar6000_version {
+    A_UINT32        host_ver;
+    A_UINT32        target_ver;
+};
+
+/* used by AR6000_IOCTL_WMI_GET_QOS_QUEUE */
+struct ar6000_queuereq {
+    A_UINT8         trafficClass;
+    A_UINT16        activeTsids;
+};
+
+/* used by AR6000_IOCTL_WMI_GET_TARGET_STATS */
+typedef struct targetStats_t {
+    A_UINT64    tx_packets;
+    A_UINT64    tx_bytes;
+    A_UINT64    tx_unicast_pkts;
+    A_UINT64    tx_unicast_bytes;
+    A_UINT64    tx_multicast_pkts;
+    A_UINT64    tx_multicast_bytes;
+    A_UINT64    tx_broadcast_pkts;
+    A_UINT64    tx_broadcast_bytes;
+    A_UINT64    tx_rts_success_cnt;
+    A_UINT64    tx_packet_per_ac[4];
+
+    A_UINT64    tx_errors;
+    A_UINT64    tx_failed_cnt;
+    A_UINT64    tx_retry_cnt;
+    A_UINT64    tx_rts_fail_cnt;
+    A_INT32     tx_unicast_rate;
+    A_UINT64    rx_packets;
+    A_UINT64    rx_bytes;
+    A_UINT64    rx_unicast_pkts;
+    A_UINT64    rx_unicast_bytes;
+    A_UINT64    rx_multicast_pkts;
+    A_UINT64    rx_multicast_bytes;
+    A_UINT64    rx_broadcast_pkts;
+    A_UINT64    rx_broadcast_bytes;
+    A_UINT64    rx_fragment_pkt;
+
+    A_UINT64    rx_errors;
+    A_UINT64    rx_crcerr;
+    A_UINT64    rx_key_cache_miss;
+    A_UINT64    rx_decrypt_err;
+    A_UINT64    rx_duplicate_frames;
+    A_INT32     rx_unicast_rate;
+
+    A_UINT64    tkip_local_mic_failure;
+    A_UINT64    tkip_counter_measures_invoked;
+    A_UINT64    tkip_replays;
+    A_UINT64    tkip_format_errors;
+    A_UINT64    ccmp_format_errors;
+    A_UINT64    ccmp_replays;
+
+    A_UINT64    power_save_failure_cnt;
+    A_INT16     noise_floor_calibation;
+
+    A_UINT64    cs_bmiss_cnt;
+    A_UINT64    cs_lowRssi_cnt;
+    A_UINT64    cs_connect_cnt;
+    A_UINT64    cs_disconnect_cnt;
+    A_UINT8     cs_aveBeacon_snr;
+    A_INT16     cs_aveBeacon_rssi;
+    A_UINT8     cs_lastRoam_msec;
+    A_UINT8     cs_snr;
+    A_INT16     cs_rssi;
+
+    A_UINT32    lq_val;
+
+    A_UINT32    wow_num_pkts_dropped;
+    A_UINT8     wow_num_host_pkt_wakeups;
+    A_UINT8     wow_num_host_event_wakeups;
+    A_UINT16    wow_num_events_discarded;
+
+}TARGET_STATS;
+
+typedef struct targetStats_cmd_t {
+    TARGET_STATS targetStats;
+    int clearStats;
+} TARGET_STATS_CMD;
+
+/* used by AR6000_XIOCTL_USER_SETKEYS */
+
+/*
+ * Setting this bit to 1 doesnot initialize the RSC on the firmware
+ */
+#define AR6000_XIOCTL_USER_SETKEYS_RSC_CTRL    1
+#define AR6000_USER_SETKEYS_RSC_UNCHANGED     0x00000002
+
+typedef struct {
+    A_UINT32  keyOpCtrl;  /* Bit Map of Key Mgmt Ctrl Flags */
+} AR6000_USER_SETKEYS_INFO;
+
+
+/* used by AR6000_XIOCTL_GPIO_OUTPUT_SET */
+struct ar6000_gpio_output_set_cmd_s {
+    A_UINT32 set_mask;
+    A_UINT32 clear_mask;
+    A_UINT32 enable_mask;
+    A_UINT32 disable_mask;
+};
+
+/*
+ * used by AR6000_XIOCTL_GPIO_REGISTER_GET and AR6000_XIOCTL_GPIO_REGISTER_SET
+ */
+struct ar6000_gpio_register_cmd_s {
+    A_UINT32 gpioreg_id;
+    A_UINT32 value;
+};
+
+/* used by AR6000_XIOCTL_GPIO_INTR_ACK */
+struct ar6000_gpio_intr_ack_cmd_s {
+    A_UINT32 ack_mask;
+};
+
+/* used by AR6000_XIOCTL_GPIO_INTR_WAIT */
+struct ar6000_gpio_intr_wait_cmd_s {
+    A_UINT32 intr_mask;
+    A_UINT32 input_values;
+};
+
+/* used by the AR6000_XIOCTL_DBGLOG_CFG_MODULE */
+typedef struct ar6000_dbglog_module_config_s {
+    A_UINT32 valid;
+    A_UINT16 mmask;
+    A_UINT16 tsr;
+    A_BOOL   rep;
+    A_UINT16 size;
+} DBGLOG_MODULE_CONFIG;
+
+typedef struct user_rssi_thold_t {
+    A_INT16     tag;
+    A_INT16     rssi;
+} USER_RSSI_THOLD;
+
+typedef struct user_rssi_params_t {
+    A_UINT8            weight;
+    A_UINT32           pollTime;
+    USER_RSSI_THOLD    tholds[12];
+} USER_RSSI_PARAMS;
+
+/*
+ * Host driver may have some config parameters. Typically, these
+ * config params are one time config parameters. These could
+ * correspond to any of the underlying modules. Host driver exposes
+ * an api for the underlying modules to get this config.
+ */
+#define AR6000_DRIVER_CFG_BASE                  0x8000
+
+/* Should driver perform wlan node caching? */
+#define AR6000_DRIVER_CFG_GET_WLANNODECACHING   0x8001
+/*Should we log raw WMI msgs */
+#define AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS      0x8002
+
+/* used by AR6000_XIOCTL_DIAG_READ & AR6000_XIOCTL_DIAG_WRITE */
+struct ar6000_diag_window_cmd_s {
+    unsigned int addr;
+    unsigned int value;
+};
+
+
+struct ar6000_traffic_activity_change {
+    A_UINT32    StreamID;   /* stream ID to indicate activity change */
+    A_UINT32    Active;     /* active (1) or inactive (0) */
+};
+
+#ifdef __cplusplus
+}
+#endif
+#endif
diff --git a/drivers/ar6000/ar6000/athtypes_linux.h b/drivers/ar6000/ar6000/athtypes_linux.h
new file mode 100644
index 00000000000..3e91de331f4
--- /dev/null
+++ b/drivers/ar6000/ar6000/athtypes_linux.h
@@ -0,0 +1,47 @@
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/athtypes_linux.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _ATHTYPES_LINUX_H_
+#define _ATHTYPES_LINUX_H_
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+typedef int8_t      A_INT8;
+typedef int16_t     A_INT16;
+typedef int32_t     A_INT32;
+typedef int64_t     A_INT64;
+
+typedef u_int8_t     A_UINT8;
+typedef u_int16_t    A_UINT16;
+typedef u_int32_t    A_UINT32;
+typedef u_int64_t    A_UINT64;
+
+typedef int             A_BOOL;
+typedef char            A_CHAR;
+typedef unsigned char   A_UCHAR;
+typedef unsigned long   A_ATH_TIMER;
+
+
+#endif /* _ATHTYPES_LINUX_H_ */
diff --git a/drivers/ar6000/ar6000/config_linux.h b/drivers/ar6000/ar6000/config_linux.h
new file mode 100644
index 00000000000..11a691d0c16
--- /dev/null
+++ b/drivers/ar6000/ar6000/config_linux.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _CONFIG_LINUX_H_
+#define _CONFIG_LINUX_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Host-side GPIO support is optional.
+ * If run-time access to GPIO pins is not required, then
+ * this should be changed to #undef.
+ */
+#define CONFIG_HOST_GPIO_SUPPORT
+
+/*
+ * Host side Test Command support
+ */
+#define CONFIG_HOST_TCMD_SUPPORT
+
+#define USE_4BYTE_REGISTER_ACCESS
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/drivers/ar6000/ar6000/debug_linux.h b/drivers/ar6000/ar6000/debug_linux.h
new file mode 100644
index 00000000000..c74e1df9f45
--- /dev/null
+++ b/drivers/ar6000/ar6000/debug_linux.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _DEBUG_LINUX_H_
+#define _DEBUG_LINUX_H_
+
+#define DBG_DEFAULTS	(DBG_ERROR|DBG_WARNING)
+
+extern A_UINT32 g_dbg_flags;
+
+#define DBGFMT  "%s() : "
+#define DBGARG  __func__
+#define DBGFN	A_PRINTF
+
+/* ------- Debug related stuff ------- */
+enum {
+    ATH_DEBUG_SEND = 0x0001,
+    ATH_DEBUG_RECV = 0x0002,
+    ATH_DEBUG_SYNC = 0x0004,
+    ATH_DEBUG_DUMP = 0x0008,
+    ATH_DEBUG_IRQ  = 0x0010,
+    ATH_DEBUG_TRC  = 0x0020,
+    ATH_DEBUG_WARN = 0x0040,
+    ATH_DEBUG_ERR  = 0x0080,
+    ATH_LOG_INF	   = 0x0100,
+    ATH_DEBUG_BMI  = 0x0110,
+    ATH_DEBUG_WMI  = 0x0120,
+    ATH_DEBUG_HIF  = 0x0140,
+    ATH_DEBUG_HTC  = 0x0180,
+    ATH_DEBUG_WLAN = 0x1000,
+    ATH_LOG_ERR	   = 0x1010,
+    ATH_DEBUG_ANY  = 0xFFFF,
+};
+
+#ifdef DEBUG
+
+#define A_DPRINTF(f, a) \
+	if(g_dbg_flags & (f)) \
+	{	\
+		DBGFN a ; \
+	}
+
+
+// TODO FIX usage of A_PRINTF!
+#define AR_DEBUG_LVL_CHECK(lvl) (debughtc & (lvl))
+#define AR_DEBUG_PRINTBUF(buffer, length, desc) do {   \
+    if (debughtc & ATH_DEBUG_DUMP) {             \
+        DebugDumpBytes(buffer, length,desc);               \
+    }                                            \
+} while(0)
+#define PRINTX_ARG(arg...) arg
+#define AR_DEBUG_PRINTF(flags, args) do {        \
+    if (debughtc & (flags)) {                    \
+        A_PRINTF(KERN_ALERT PRINTX_ARG args);    \
+    }                                            \
+} while (0)
+#define AR_DEBUG_ASSERT(test) do {               \
+    if (!(test)) {                               \
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#test));         \
+    }                                            \
+} while(0)
+extern int debughtc;
+#else
+#define AR_DEBUG_PRINTF(flags, args)
+#define AR_DEBUG_PRINTBUF(buffer, length, desc)
+#define AR_DEBUG_ASSERT(test)
+#define AR_DEBUG_LVL_CHECK(lvl) 0
+#define A_DPRINTF(f, a)
+#endif
+
+#endif /* _DEBUG_LINUX_H_ */
diff --git a/drivers/ar6000/ar6000/ioctl.c b/drivers/ar6000/ar6000/ioctl.c
new file mode 100644
index 00000000000..04aa911f323
--- /dev/null
+++ b/drivers/ar6000/ar6000/ioctl.c
@@ -0,0 +1,2532 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "ar6000_drv.h"
+
+static A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+static A_UINT8 null_mac[] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
+extern USER_RSSI_THOLD rssi_map[12];
+extern unsigned int wmitimeout;
+extern A_WAITQUEUE_HEAD arEvent;
+extern int tspecCompliance;
+extern int bypasswmi;
+
+static int
+ar6000_ioctl_get_roam_tbl(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if(wmi_get_roam_tbl_cmd(ar->arWmi) != A_OK) {
+        return -EIO;
+    }
+
+    return 0;
+}
+
+static int
+ar6000_ioctl_get_roam_data(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+
+    /* currently assume only roam times are required */
+    if(wmi_get_roam_data_cmd(ar->arWmi, ROAM_DATA_TIME) != A_OK) {
+        return -EIO;
+    }
+
+
+    return 0;
+}
+
+static int
+ar6000_ioctl_set_roam_ctrl(struct net_device *dev, char *userdata)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_ROAM_CTRL_CMD cmd;
+    A_UINT8 size = sizeof(cmd);
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+
+    if (copy_from_user(&cmd, userdata, size)) {
+        return -EFAULT;
+    }
+
+    if (cmd.roamCtrlType == WMI_SET_HOST_BIAS) {
+        if (cmd.info.bssBiasInfo.numBss > 1) {
+            size += (cmd.info.bssBiasInfo.numBss - 1) * sizeof(WMI_BSS_BIAS);
+        }
+    }
+
+    if (copy_from_user(&cmd, userdata, size)) {
+        return -EFAULT;
+    }
+
+    if(wmi_set_roam_ctrl_cmd(ar->arWmi, &cmd, size) != A_OK) {
+        return -EIO;
+    }
+
+    return 0;
+}
+
+static int
+ar6000_ioctl_set_powersave_timers(struct net_device *dev, char *userdata)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_POWERSAVE_TIMERS_POLICY_CMD cmd;
+    A_UINT8 size = sizeof(cmd);
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, userdata, size)) {
+        return -EFAULT;
+    }
+
+    if (copy_from_user(&cmd, userdata, size)) {
+        return -EFAULT;
+    }
+
+    if(wmi_set_powersave_timers_cmd(ar->arWmi, &cmd, size) != A_OK) {
+        return -EIO;
+    }
+
+    return 0;
+}
+
+static int
+ar6000_ioctl_set_wmm(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_WMM_CMD cmd;
+    A_STATUS ret;
+
+    if ((dev->flags & IFF_UP) != IFF_UP) {
+        return -EIO;
+    }
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, (char *)((unsigned int*)rq->ifr_data + 1),
+                                sizeof(cmd)))
+    {
+        return -EFAULT;
+    }
+
+    if (cmd.status == WMI_WMM_ENABLED) {
+        ar->arWmmEnabled = TRUE;
+    } else {
+        ar->arWmmEnabled = FALSE;
+    }
+
+    ret = wmi_set_wmm_cmd(ar->arWmi, cmd.status);
+
+    switch (ret) {
+        case A_OK:
+            return 0;
+        case A_EBUSY :
+            return -EBUSY;
+        case A_NO_MEMORY:
+            return -ENOMEM;
+        case A_EINVAL:
+        default:
+            return -EFAULT;
+    }
+}
+
+static int
+ar6000_ioctl_set_txop(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_WMM_TXOP_CMD cmd;
+    A_STATUS ret;
+
+    if ((dev->flags & IFF_UP) != IFF_UP) {
+        return -EIO;
+    }
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, (char *)((unsigned int*)rq->ifr_data + 1),
+                                sizeof(cmd)))
+    {
+        return -EFAULT;
+    }
+
+    ret = wmi_set_wmm_txop(ar->arWmi, cmd.txopEnable);
+
+    switch (ret) {
+        case A_OK:
+            return 0;
+        case A_EBUSY :
+            return -EBUSY;
+        case A_NO_MEMORY:
+            return -ENOMEM;
+        case A_EINVAL:
+        default:
+            return -EFAULT;
+    }
+}
+
+static int
+ar6000_ioctl_get_rd(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    A_STATUS ret = 0;
+
+    if ((dev->flags & IFF_UP) != IFF_UP || ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if(copy_to_user((char *)((unsigned int*)rq->ifr_data + 1),
+                            &ar->arRegCode, sizeof(ar->arRegCode)))
+        ret = -EFAULT;
+
+    return ret;
+}
+
+
+/* Get power mode command */
+static int
+ar6000_ioctl_get_power_mode(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_POWER_MODE_CMD power_mode;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    power_mode.powerMode = wmi_get_power_mode_cmd(ar->arWmi);
+    if (copy_to_user(rq->ifr_data, &power_mode, sizeof(WMI_POWER_MODE_CMD))) {
+        ret = -EFAULT;
+    }
+
+    return ret;
+}
+
+
+static int
+ar6000_ioctl_set_channelParams(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_CHANNEL_PARAMS_CMD cmd, *cmdp;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (cmd.numChannels > 1) {
+        cmdp = A_MALLOC(130);
+        if (copy_from_user(cmdp, rq->ifr_data,
+                           sizeof (*cmdp) +
+                           ((cmd.numChannels - 1) * sizeof(A_UINT16))))
+        {
+            kfree(cmdp);
+            return -EFAULT;
+        }
+    } else {
+        cmdp = &cmd;
+    }
+
+    if ((ar->arPhyCapability == WMI_11G_CAPABILITY) &&
+        ((cmdp->phyMode == WMI_11A_MODE) || (cmdp->phyMode == WMI_11AG_MODE)))
+    {
+        ret = -EINVAL;
+    }
+
+    if (!ret &&
+        (wmi_set_channelParams_cmd(ar->arWmi, cmdp->scanParam, cmdp->phyMode,
+                                   cmdp->numChannels, cmdp->channelList)
+         != A_OK))
+    {
+        ret = -EIO;
+    }
+
+    if (cmd.numChannels > 1) {
+        kfree(cmdp);
+    }
+
+    return ret;
+}
+
+static int
+ar6000_ioctl_set_snr_threshold(struct net_device *dev, struct ifreq *rq)
+{
+
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SNR_THRESHOLD_PARAMS_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if( wmi_set_snr_threshold_params(ar->arWmi, &cmd) != A_OK ) {
+        ret = -EIO;
+    }
+
+    return ret;
+}
+
+static int
+ar6000_ioctl_set_rssi_threshold(struct net_device *dev, struct ifreq *rq)
+{
+#define SWAP_THOLD(thold1, thold2) do { \
+    USER_RSSI_THOLD tmpThold;           \
+    tmpThold.tag = thold1.tag;          \
+    tmpThold.rssi = thold1.rssi;        \
+    thold1.tag = thold2.tag;            \
+    thold1.rssi = thold2.rssi;          \
+    thold2.tag = tmpThold.tag;          \
+    thold2.rssi = tmpThold.rssi;        \
+} while (0)
+
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_RSSI_THRESHOLD_PARAMS_CMD cmd;
+    USER_RSSI_PARAMS rssiParams;
+    A_INT32 i, j;
+
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user((char *)&rssiParams, (char *)((unsigned int *)rq->ifr_data + 1), sizeof(USER_RSSI_PARAMS))) {
+        return -EFAULT;
+    }
+    cmd.weight = rssiParams.weight;
+    cmd.pollTime = rssiParams.pollTime;
+
+    A_MEMCPY(rssi_map, &rssiParams.tholds, sizeof(rssi_map));
+    /*
+     *  only 6 elements, so use bubble sorting, in ascending order
+     */
+    for (i = 5; i > 0; i--) {
+        for (j = 0; j < i; j++) { /* above tholds */
+            if (rssi_map[j+1].rssi < rssi_map[j].rssi) {
+                SWAP_THOLD(rssi_map[j+1], rssi_map[j]);
+            } else if (rssi_map[j+1].rssi == rssi_map[j].rssi) {
+                return EFAULT;
+            }
+        }
+    }
+    for (i = 11; i > 6; i--) {
+        for (j = 6; j < i; j++) { /* below tholds */
+            if (rssi_map[j+1].rssi < rssi_map[j].rssi) {
+                SWAP_THOLD(rssi_map[j+1], rssi_map[j]);
+            } else if (rssi_map[j+1].rssi == rssi_map[j].rssi) {
+                return EFAULT;
+            }
+        }
+    }
+
+#ifdef DEBUG
+    for (i = 0; i < 12; i++) {
+        AR_DEBUG2_PRINTF("thold[%d].tag: %d, thold[%d].rssi: %d \n",
+                i, rssi_map[i].tag, i, rssi_map[i].rssi);
+    }
+#endif
+    cmd.thresholdAbove1_Val = rssi_map[0].rssi;
+    cmd.thresholdAbove2_Val = rssi_map[1].rssi;
+    cmd.thresholdAbove3_Val = rssi_map[2].rssi;
+    cmd.thresholdAbove4_Val = rssi_map[3].rssi;
+    cmd.thresholdAbove5_Val = rssi_map[4].rssi;
+    cmd.thresholdAbove6_Val = rssi_map[5].rssi;
+    cmd.thresholdBelow1_Val = rssi_map[6].rssi;
+    cmd.thresholdBelow2_Val = rssi_map[7].rssi;
+    cmd.thresholdBelow3_Val = rssi_map[8].rssi;
+    cmd.thresholdBelow4_Val = rssi_map[9].rssi;
+    cmd.thresholdBelow5_Val = rssi_map[10].rssi;
+    cmd.thresholdBelow6_Val = rssi_map[11].rssi;
+
+    if( wmi_set_rssi_threshold_params(ar->arWmi, &cmd) != A_OK ) {
+        ret = -EIO;
+    }
+
+    return ret;
+}
+
+static int
+ar6000_ioctl_set_lq_threshold(struct net_device *dev, struct ifreq *rq)
+{
+
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_LQ_THRESHOLD_PARAMS_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, (char *)((unsigned int *)rq->ifr_data + 1), sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if( wmi_set_lq_threshold_params(ar->arWmi, &cmd) != A_OK ) {
+        ret = -EIO;
+    }
+
+    return ret;
+}
+
+
+static int
+ar6000_ioctl_set_probedSsid(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_PROBED_SSID_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (wmi_probedSsid_cmd(ar->arWmi, cmd.entryIndex, cmd.flag, cmd.ssidLength,
+                                  cmd.ssid) != A_OK)
+    {
+        ret = -EIO;
+    }
+
+    return ret;
+}
+
+static int
+ar6000_ioctl_set_badAp(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_ADD_BAD_AP_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (cmd.badApIndex > WMI_MAX_BAD_AP_INDEX) {
+        return -EIO;
+    }
+
+    if (A_MEMCMP(cmd.bssid, null_mac, AR6000_ETH_ADDR_LEN) == 0) {
+        /*
+         * This is a delete badAP.
+         */
+        if (wmi_deleteBadAp_cmd(ar->arWmi, cmd.badApIndex) != A_OK) {
+            ret = -EIO;
+        }
+    } else {
+        if (wmi_addBadAp_cmd(ar->arWmi, cmd.badApIndex, cmd.bssid) != A_OK) {
+            ret = -EIO;
+        }
+    }
+
+    return ret;
+}
+
+static int
+ar6000_ioctl_create_qos(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_CREATE_PSTREAM_CMD cmd;
+    A_STATUS ret;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    ret = wmi_verify_tspec_params(&cmd, tspecCompliance);
+    if (ret == A_OK)
+        ret = wmi_create_pstream_cmd(ar->arWmi, &cmd);
+
+    switch (ret) {
+        case A_OK:
+            return 0;
+        case A_EBUSY :
+            return -EBUSY;
+        case A_NO_MEMORY:
+            return -ENOMEM;
+        case A_EINVAL:
+        default:
+            return -EFAULT;
+    }
+}
+
+static int
+ar6000_ioctl_delete_qos(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_DELETE_PSTREAM_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    ret = wmi_delete_pstream_cmd(ar->arWmi, cmd.trafficClass, cmd.tsid);
+
+    switch (ret) {
+        case A_OK:
+            return 0;
+        case A_EBUSY :
+            return -EBUSY;
+        case A_NO_MEMORY:
+            return -ENOMEM;
+        case A_EINVAL:
+        default:
+            return -EFAULT;
+    }
+}
+
+static int
+ar6000_ioctl_get_qos_queue(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    struct ar6000_queuereq qreq;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if( copy_from_user(&qreq, rq->ifr_data,
+                  sizeof(struct ar6000_queuereq)))
+        return -EFAULT;
+
+    qreq.activeTsids = wmi_get_mapped_qos_queue(ar->arWmi, qreq.trafficClass);
+
+    if (copy_to_user(rq->ifr_data, &qreq,
+                 sizeof(struct ar6000_queuereq)))
+    {
+        ret = -EFAULT;
+    }
+
+    return ret;
+}
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+static A_STATUS
+ar6000_ioctl_tcmd_get_rx_report(struct net_device *dev,
+                                 struct ifreq *rq, A_UINT8 *data, A_UINT32 len)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    A_UINT32    buf[2];
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (down_interruptible(&ar->arSem)) {
+        return -ERESTARTSYS;
+    }
+    ar->tcmdRxReport = 0;
+    if (wmi_test_cmd(ar->arWmi, data, len) != A_OK) {
+        up(&ar->arSem);
+        return -EIO;
+    }
+
+    wait_event_interruptible_timeout(arEvent, ar->tcmdRxReport != 0, wmitimeout * HZ);
+
+    if (signal_pending(current)) {
+        ret = -EINTR;
+    }
+
+    buf[0] = ar->tcmdRxTotalPkt;
+    buf[1] = ar->tcmdRxRssi;
+    if (!ret && copy_to_user(rq->ifr_data, buf, sizeof(buf))) {
+        ret = -EFAULT;
+    }
+
+    up(&ar->arSem);
+
+    return ret;
+}
+
+void
+ar6000_tcmd_rx_report_event(void *devt, A_UINT8 * results, int len)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+    TCMD_CONT_RX * rx_rep = (TCMD_CONT_RX *)results;
+
+    ar->tcmdRxTotalPkt = rx_rep->u.report.totalPkt;
+    ar->tcmdRxRssi = rx_rep->u.report.rssiInDBm;
+    ar->tcmdRxReport = 1;
+
+    wake_up(&arEvent);
+}
+#endif /* CONFIG_HOST_TCMD_SUPPORT*/
+
+static int
+ar6000_ioctl_set_error_report_bitmask(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_TARGET_ERROR_REPORT_BITMASK cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    ret = wmi_set_error_report_bitmask(ar->arWmi, cmd.bitmask);
+
+    return  (ret==0 ? ret : -EINVAL);
+}
+
+static int
+ar6000_clear_target_stats(struct net_device *dev)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    TARGET_STATS *pStats = &ar->arTargetStats;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+       return -EIO;
+    }
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+    A_MEMZERO(pStats, sizeof(TARGET_STATS));
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+    return ret;
+}
+
+static int
+ar6000_ioctl_get_target_stats(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    TARGET_STATS_CMD cmd;
+    TARGET_STATS *pStats = &ar->arTargetStats;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+    if (down_interruptible(&ar->arSem)) {
+        return -ERESTARTSYS;
+    }
+
+    ar->statsUpdatePending = TRUE;
+
+    if(wmi_get_stats_cmd(ar->arWmi) != A_OK) {
+        up(&ar->arSem);
+        return -EIO;
+    }
+
+    wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ);
+
+    if (signal_pending(current)) {
+        ret = -EINTR;
+    }
+
+    if (!ret && copy_to_user(rq->ifr_data, pStats, sizeof(*pStats))) {
+        ret = -EFAULT;
+    }
+
+    if (cmd.clearStats == 1) {
+        ret = ar6000_clear_target_stats(dev);
+    }
+
+    up(&ar->arSem);
+
+    return ret;
+}
+
+static int
+ar6000_ioctl_set_access_params(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_ACCESS_PARAMS_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (wmi_set_access_params_cmd(ar->arWmi, cmd.txop, cmd.eCWmin, cmd.eCWmax,
+                                  cmd.aifsn) == A_OK)
+    {
+        ret = 0;
+    } else {
+        ret = -EINVAL;
+    }
+
+    return (ret);
+}
+
+static int
+ar6000_ioctl_set_disconnect_timeout(struct net_device *dev, struct ifreq *rq)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_DISC_TIMEOUT_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (wmi_disctimeout_cmd(ar->arWmi, cmd.disconnectTimeout) == A_OK)
+    {
+        ret = 0;
+    } else {
+        ret = -EINVAL;
+    }
+
+    return (ret);
+}
+
+static int
+ar6000_xioctl_set_voice_pkt_size(struct net_device *dev, char * userdata)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_VOICE_PKT_SIZE_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (wmi_set_voice_pkt_size_cmd(ar->arWmi, cmd.voicePktSize) == A_OK)
+    {
+        ret = 0;
+    } else {
+        ret = -EINVAL;
+    }
+
+
+    return (ret);
+}
+
+static int
+ar6000_xioctl_set_max_sp_len(struct net_device *dev, char * userdata)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_MAX_SP_LEN_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (wmi_set_max_sp_len_cmd(ar->arWmi, cmd.maxSPLen) == A_OK)
+    {
+        ret = 0;
+    } else {
+        ret = -EINVAL;
+    }
+
+    return (ret);
+}
+
+
+static int
+ar6000_xioctl_set_bt_status_cmd(struct net_device *dev, char * userdata)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_BT_STATUS_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (wmi_set_bt_status_cmd(ar->arWmi, cmd.streamType, cmd.status) == A_OK)
+    {
+        ret = 0;
+    } else {
+        ret = -EINVAL;
+    }
+
+    return (ret);
+}
+
+static int
+ar6000_xioctl_set_bt_params_cmd(struct net_device *dev, char * userdata)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    WMI_SET_BT_PARAMS_CMD cmd;
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
+        return -EFAULT;
+    }
+
+    if (wmi_set_bt_params_cmd(ar->arWmi, &cmd) == A_OK)
+    {
+        ret = 0;
+    } else {
+        ret = -EINVAL;
+    }
+
+    return (ret);
+}
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+struct ar6000_gpio_intr_wait_cmd_s  gpio_intr_results;
+/* gpio_reg_results and gpio_data_available are protected by arSem */
+static struct ar6000_gpio_register_cmd_s gpio_reg_results;
+static A_BOOL gpio_data_available; /* Requested GPIO data available */
+static A_BOOL gpio_intr_available; /* GPIO interrupt info available */
+static A_BOOL gpio_ack_received;   /* GPIO ack was received */
+
+/* Host-side initialization for General Purpose I/O support */
+void ar6000_gpio_init(void)
+{
+    gpio_intr_available = FALSE;
+    gpio_data_available = FALSE;
+    gpio_ack_received   = FALSE;
+}
+
+/*
+ * Called when a GPIO interrupt is received from the Target.
+ * intr_values shows which GPIO pins have interrupted.
+ * input_values shows a recent value of GPIO pins.
+ */
+void
+ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values)
+{
+    gpio_intr_results.intr_mask = intr_mask;
+    gpio_intr_results.input_values = input_values;
+    *((volatile A_BOOL *)&gpio_intr_available) = TRUE;
+    wake_up(&arEvent);
+}
+
+/*
+ * This is called when a response is received from the Target
+ * for a previous or ar6000_gpio_input_get or ar6000_gpio_register_get
+ * call.
+ */
+void
+ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value)
+{
+    gpio_reg_results.gpioreg_id = reg_id;
+    gpio_reg_results.value = value;
+    *((volatile A_BOOL *)&gpio_data_available) = TRUE;
+    wake_up(&arEvent);
+}
+
+/*
+ * This is called when an acknowledgement is received from the Target
+ * for a previous or ar6000_gpio_output_set or ar6000_gpio_register_set
+ * call.
+ */
+void
+ar6000_gpio_ack_rx(void)
+{
+    gpio_ack_received = TRUE;
+    wake_up(&arEvent);
+}
+
+A_STATUS
+ar6000_gpio_output_set(struct net_device *dev,
+                       A_UINT32 set_mask,
+                       A_UINT32 clear_mask,
+                       A_UINT32 enable_mask,
+                       A_UINT32 disable_mask)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    gpio_ack_received = FALSE;
+    return wmi_gpio_output_set(ar->arWmi,
+                set_mask, clear_mask, enable_mask, disable_mask);
+}
+
+static A_STATUS
+ar6000_gpio_input_get(struct net_device *dev)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    *((volatile A_BOOL *)&gpio_data_available) = FALSE;
+    return wmi_gpio_input_get(ar->arWmi);
+}
+
+static A_STATUS
+ar6000_gpio_register_set(struct net_device *dev,
+                         A_UINT32 gpioreg_id,
+                         A_UINT32 value)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    gpio_ack_received = FALSE;
+    return wmi_gpio_register_set(ar->arWmi, gpioreg_id, value);
+}
+
+static A_STATUS
+ar6000_gpio_register_get(struct net_device *dev,
+                         A_UINT32 gpioreg_id)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    *((volatile A_BOOL *)&gpio_data_available) = FALSE;
+    return wmi_gpio_register_get(ar->arWmi, gpioreg_id);
+}
+
+static A_STATUS
+ar6000_gpio_intr_ack(struct net_device *dev,
+                     A_UINT32 ack_mask)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    gpio_intr_available = FALSE;
+    return wmi_gpio_intr_ack(ar->arWmi, ack_mask);
+}
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    HIF_DEVICE *hifDevice = ar->arHifDevice;
+    int ret, param, param2;
+    unsigned int address = 0;
+    unsigned int length = 0;
+    unsigned char *buffer;
+    char *userdata;
+    A_UINT32 connectCtrlFlags;
+
+
+    static WMI_SCAN_PARAMS_CMD scParams = {0, 0, 0, 0, 0,
+                                           WMI_SHORTSCANRATIO_DEFAULT,
+                                           DEFAULT_SCAN_CTRL_FLAGS,
+                                           0};
+    WMI_SET_AKMP_PARAMS_CMD  akmpParams;
+    WMI_SET_PMKID_LIST_CMD   pmkidInfo;
+
+    if (cmd == AR6000_IOCTL_EXTENDED)
+    {
+        /*
+         * This allows for many more wireless ioctls than would otherwise
+         * be available.  Applications embed the actual ioctl command in
+         * the first word of the parameter block, and use the command
+         * AR6000_IOCTL_EXTENDED_CMD on the ioctl call.
+         */
+        get_user(cmd, (int *)rq->ifr_data);
+        userdata = (char *)(((unsigned int *)rq->ifr_data)+1);
+    }
+    else
+    {
+        userdata = (char *)rq->ifr_data;
+    }
+
+    if ((ar->arWlanState == WLAN_DISABLED) &&
+        ((cmd != AR6000_XIOCTRL_WMI_SET_WLAN_STATE) &&
+         (cmd != AR6000_XIOCTL_DIAG_READ) &&
+         (cmd != AR6000_XIOCTL_DIAG_WRITE)))
+    {
+        return -EIO;
+    }
+
+    ret = 0;
+    switch(cmd)
+    {
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+        case AR6000_XIOCTL_TCMD_CONT_TX:
+            {
+                TCMD_CONT_TX txCmd;
+
+                if (ar->tcmdPm == TCMD_PM_SLEEP) {
+                    A_PRINTF("Can NOT send tx tcmd when target is asleep! \n");
+                    return -EFAULT;
+                }
+
+                if(copy_from_user(&txCmd, userdata, sizeof(TCMD_CONT_TX)))
+                    return -EFAULT;
+                wmi_test_cmd(ar->arWmi,(A_UINT8 *)&txCmd, sizeof(TCMD_CONT_TX));
+            }
+            break;
+        case AR6000_XIOCTL_TCMD_CONT_RX:
+            {
+                TCMD_CONT_RX rxCmd;
+
+                if (ar->tcmdPm == TCMD_PM_SLEEP) {
+                    A_PRINTF("Can NOT send rx tcmd when target is asleep! \n");
+                    return -EFAULT;
+                }
+                if(copy_from_user(&rxCmd, userdata, sizeof(TCMD_CONT_RX)))
+                    return -EFAULT;
+                switch(rxCmd.act)
+                {
+                    case TCMD_CONT_RX_PROMIS:
+                    case TCMD_CONT_RX_FILTER:
+                    case TCMD_CONT_RX_SETMAC:
+                         wmi_test_cmd(ar->arWmi,(A_UINT8 *)&rxCmd,
+                                                sizeof(TCMD_CONT_RX));
+                         break;
+                    case TCMD_CONT_RX_REPORT:
+                         ar6000_ioctl_tcmd_get_rx_report(dev, rq,
+                         (A_UINT8 *)&rxCmd, sizeof(TCMD_CONT_RX));
+                         break;
+                    default:
+                         A_PRINTF("Unknown Cont Rx mode: %d\n",rxCmd.act);
+                         return -EINVAL;
+                }
+            }
+            break;
+        case AR6000_XIOCTL_TCMD_PM:
+            {
+                TCMD_PM pmCmd;
+
+                if(copy_from_user(&pmCmd, userdata, sizeof(TCMD_PM)))
+                    return -EFAULT;
+                ar->tcmdPm = pmCmd.mode;
+                wmi_test_cmd(ar->arWmi, (A_UINT8*)&pmCmd, sizeof(TCMD_PM));
+            }
+            break;
+#endif /* CONFIG_HOST_TCMD_SUPPORT */
+
+        case AR6000_XIOCTL_BMI_DONE:
+            ret = BMIDone(hifDevice);
+            break;
+
+        case AR6000_XIOCTL_BMI_READ_MEMORY:
+            get_user(address, (unsigned int *)userdata);
+            get_user(length, (unsigned int *)userdata + 1);
+            AR_DEBUG_PRINTF("Read Memory (address: 0x%x, length: %d)\n",
+                             address, length);
+            if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
+                A_MEMZERO(buffer, length);
+                ret = BMIReadMemory(hifDevice, address, buffer, length);
+                if (copy_to_user(rq->ifr_data, buffer, length)) {
+                    ret = -EFAULT;
+                }
+                A_FREE(buffer);
+            } else {
+                ret = -ENOMEM;
+            }
+            break;
+
+        case AR6000_XIOCTL_BMI_WRITE_MEMORY:
+            get_user(address, (unsigned int *)userdata);
+            get_user(length, (unsigned int *)userdata + 1);
+            AR_DEBUG_PRINTF("Write Memory (address: 0x%x, length: %d)\n",
+                             address, length);
+            if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
+                A_MEMZERO(buffer, length);
+                if (copy_from_user(buffer, &userdata[sizeof(address) +
+                                   sizeof(length)], length))
+                {
+                    ret = -EFAULT;
+                } else {
+                    ret = BMIWriteMemory(hifDevice, address, buffer, length);
+                }
+                A_FREE(buffer);
+            } else {
+                ret = -ENOMEM;
+            }
+            break;
+
+        case AR6000_XIOCTL_BMI_TEST:
+           AR_DEBUG_PRINTF("No longer supported\n");
+           ret = -EOPNOTSUPP;
+           break;
+
+        case AR6000_XIOCTL_BMI_EXECUTE:
+            get_user(address, (unsigned int *)userdata);
+            get_user(param, (unsigned int *)userdata + 1);
+            AR_DEBUG_PRINTF("Execute (address: 0x%x, param: %d)\n",
+                             address, param);
+            ret = BMIExecute(hifDevice, address, &param);
+            put_user(param, (unsigned int *)rq->ifr_data); /* return value */
+            break;
+
+        case AR6000_XIOCTL_BMI_SET_APP_START:
+            get_user(address, (unsigned int *)userdata);
+            AR_DEBUG_PRINTF("Set App Start (address: 0x%x)\n", address);
+            ret = BMISetAppStart(hifDevice, address);
+            break;
+
+        case AR6000_XIOCTL_BMI_READ_SOC_REGISTER:
+            get_user(address, (unsigned int *)userdata);
+            ret = BMIReadSOCRegister(hifDevice, address, &param);
+            put_user(param, (unsigned int *)rq->ifr_data); /* return value */
+            break;
+
+        case AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER:
+            get_user(address, (unsigned int *)userdata);
+            get_user(param, (unsigned int *)userdata + 1);
+            ret = BMIWriteSOCRegister(hifDevice, address, param);
+            break;
+
+#ifdef HTC_RAW_INTERFACE
+        case AR6000_XIOCTL_HTC_RAW_OPEN:
+            ret = A_OK;
+            if (!arRawIfEnabled(ar)) {
+                /* make sure block size is set in case the target was reset since last
+                  * BMI phase (i.e. flashup downloads) */
+                ret = ar6000_SetHTCBlockSize(ar);
+                if (A_FAILED(ret)) {
+                    break;
+                }
+                /* Terminate the BMI phase */
+                ret = BMIDone(hifDevice);
+                if (ret == A_OK) {
+                    ret = ar6000_htc_raw_open(ar);
+                }
+            }
+            break;
+
+        case AR6000_XIOCTL_HTC_RAW_CLOSE:
+            if (arRawIfEnabled(ar)) {
+                ret = ar6000_htc_raw_close(ar);
+                arRawIfEnabled(ar) = FALSE;
+            } else {
+                ret = A_ERROR;
+            }
+            break;
+
+        case AR6000_XIOCTL_HTC_RAW_READ:
+            if (arRawIfEnabled(ar)) {
+                unsigned int streamID;
+                get_user(streamID, (unsigned int *)userdata);
+                get_user(length, (unsigned int *)userdata + 1);
+                buffer = rq->ifr_data + sizeof(length);
+                ret = ar6000_htc_raw_read(ar, (HTC_RAW_STREAM_ID)streamID,
+                                          buffer, length);
+                put_user(ret, (unsigned int *)rq->ifr_data);
+            } else {
+                ret = A_ERROR;
+            }
+            break;
+
+        case AR6000_XIOCTL_HTC_RAW_WRITE:
+            if (arRawIfEnabled(ar)) {
+                unsigned int streamID;
+                get_user(streamID, (unsigned int *)userdata);
+                get_user(length, (unsigned int *)userdata + 1);
+                buffer = userdata + sizeof(streamID) + sizeof(length);
+                ret = ar6000_htc_raw_write(ar, (HTC_RAW_STREAM_ID)streamID,
+                                           buffer, length);
+                put_user(ret, (unsigned int *)rq->ifr_data);
+            } else {
+                ret = A_ERROR;
+            }
+            break;
+#endif /* HTC_RAW_INTERFACE */
+
+        case AR6000_IOCTL_WMI_GETREV:
+        {
+            if (copy_to_user(rq->ifr_data, &ar->arVersion,
+                             sizeof(ar->arVersion)))
+            {
+                ret = -EFAULT;
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SETPWR:
+        {
+            WMI_POWER_MODE_CMD pwrModeCmd;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&pwrModeCmd, userdata,
+                                   sizeof(pwrModeCmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_powermode_cmd(ar->arWmi, pwrModeCmd.powerMode)
+                       != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS:
+        {
+            WMI_IBSS_PM_CAPS_CMD ibssPmCaps;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&ibssPmCaps, userdata,
+                                   sizeof(ibssPmCaps)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_ibsspmcaps_cmd(ar->arWmi, ibssPmCaps.power_saving, ibssPmCaps.ttl,
+                    ibssPmCaps.atim_windows, ibssPmCaps.timeout_value) != A_OK)
+                {
+                    ret = -EIO;
+                }
+                AR6000_SPIN_LOCK(&ar->arLock, 0);
+                ar->arIbssPsEnable = ibssPmCaps.power_saving;
+                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_PMPARAMS:
+        {
+            WMI_POWER_PARAMS_CMD pmParams;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&pmParams, userdata,
+                                      sizeof(pmParams)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_pmparams_cmd(ar->arWmi, pmParams.idle_period,
+                                     pmParams.pspoll_number,
+                                     pmParams.dtim_policy) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SETSCAN:
+        {
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&scParams, userdata,
+                                      sizeof(scParams)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (CAN_SCAN_IN_CONNECT(scParams.scanCtrlFlags)) {
+                    ar->arSkipScan = FALSE;
+                } else {
+                    ar->arSkipScan = TRUE;
+                }
+
+                if (wmi_scanparams_cmd(ar->arWmi, scParams.fg_start_period,
+                                       scParams.fg_end_period,
+                                       scParams.bg_period,
+                                       scParams.minact_chdwell_time,
+                                       scParams.maxact_chdwell_time,
+                                       scParams.pas_chdwell_time,
+                                       scParams.shortScanRatio,
+                                       scParams.scanCtrlFlags,
+                                       scParams.max_dfsch_act_time) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SETLISTENINT:
+        {
+            WMI_LISTEN_INT_CMD listenCmd;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&listenCmd, userdata,
+                                      sizeof(listenCmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                    if (wmi_listeninterval_cmd(ar->arWmi, listenCmd.listenInterval, listenCmd.numBeacons) != A_OK) {
+                        ret = -EIO;
+                    } else {
+                        AR6000_SPIN_LOCK(&ar->arLock, 0);
+                        ar->arListenInterval = param;
+                        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+                    }
+
+                }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_BMISS_TIME:
+        {
+            WMI_BMISS_TIME_CMD bmissCmd;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&bmissCmd, userdata,
+                                      sizeof(bmissCmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_bmisstime_cmd(ar->arWmi, bmissCmd.bmissTime, bmissCmd.numBeacons) != A_OK) {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SETBSSFILTER:
+        {
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else {
+
+                get_user(param, (unsigned char *)userdata);
+                get_user(param2, (unsigned int *)(userdata + 1));
+		printk("SETBSSFILTER: filter 0x%x, mask: 0x%x\n", param, param2);
+                if (wmi_bssfilter_cmd(ar->arWmi, param, param2) != A_OK) {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_SNRTHRESHOLD:
+        {
+            ret = ar6000_ioctl_set_snr_threshold(dev, rq);
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD:
+        {
+            ret = ar6000_ioctl_set_rssi_threshold(dev, rq);
+            break;
+        }
+        case AR6000_XIOCTL_WMI_CLR_RSSISNR:
+        {
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            }
+            ret = wmi_clr_rssi_snr(ar->arWmi);
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_LQTHRESHOLD:
+        {
+            ret = ar6000_ioctl_set_lq_threshold(dev, rq);
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_LPREAMBLE:
+        {
+            WMI_SET_LPREAMBLE_CMD setLpreambleCmd;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&setLpreambleCmd, userdata,
+                                   sizeof(setLpreambleCmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_lpreamble_cmd(ar->arWmi, setLpreambleCmd.status)
+                       != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_RTS:
+        {
+            WMI_SET_RTS_CMD rtsCmd;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&rtsCmd, userdata,
+                                   sizeof(rtsCmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_rts_cmd(ar->arWmi, rtsCmd.threshold)
+                       != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_WMM:
+        {
+            ret = ar6000_ioctl_set_wmm(dev, rq);
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_TXOP:
+        {
+            ret = ar6000_ioctl_set_txop(dev, rq);
+            break;
+        }
+        case AR6000_XIOCTL_WMI_GET_RD:
+        {
+            ret = ar6000_ioctl_get_rd(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_CHANNELPARAMS:
+        {
+            ret = ar6000_ioctl_set_channelParams(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_PROBEDSSID:
+        {
+            ret = ar6000_ioctl_set_probedSsid(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_BADAP:
+        {
+            ret = ar6000_ioctl_set_badAp(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_CREATE_QOS:
+        {
+            ret = ar6000_ioctl_create_qos(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_DELETE_QOS:
+        {
+            ret = ar6000_ioctl_delete_qos(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_GET_QOS_QUEUE:
+        {
+            ret = ar6000_ioctl_get_qos_queue(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_GET_TARGET_STATS:
+        {
+            ret = ar6000_ioctl_get_target_stats(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK:
+        {
+            ret = ar6000_ioctl_set_error_report_bitmask(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_ASSOC_INFO:
+        {
+            WMI_SET_ASSOC_INFO_CMD cmd;
+            A_UINT8 assocInfo[WMI_MAX_ASSOC_INFO_LEN];
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else {
+                get_user(cmd.ieType, userdata);
+                if (cmd.ieType >= WMI_MAX_ASSOC_INFO_TYPE) {
+                    ret = -EIO;
+                } else {
+                    get_user(cmd.bufferSize, userdata + 1);
+                    if (cmd.bufferSize > WMI_MAX_ASSOC_INFO_LEN) {
+                        ret = -EFAULT;
+                        break;
+                    }
+                    if (copy_from_user(assocInfo, userdata + 2,
+                                       cmd.bufferSize))
+                    {
+                        ret = -EFAULT;
+                    } else {
+                        if (wmi_associnfo_cmd(ar->arWmi, cmd.ieType,
+                                                 cmd.bufferSize,
+                                                 assocInfo) != A_OK)
+                        {
+                            ret = -EIO;
+                        }
+                    }
+                }
+            }
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_ACCESS_PARAMS:
+        {
+            ret = ar6000_ioctl_set_access_params(dev, rq);
+            break;
+        }
+        case AR6000_IOCTL_WMI_SET_DISC_TIMEOUT:
+        {
+            ret = ar6000_ioctl_set_disconnect_timeout(dev, rq);
+            break;
+        }
+        case AR6000_XIOCTL_FORCE_TARGET_RESET:
+        {
+            if (ar->arHtcTarget)
+            {
+//                HTCForceReset(htcTarget);
+            }
+            else
+            {
+                AR_DEBUG_PRINTF("ar6000_ioctl cannot attempt reset.\n");
+            }
+            break;
+        }
+        case AR6000_XIOCTL_TARGET_INFO:
+        case AR6000_XIOCTL_CHECK_TARGET_READY: /* backwards compatibility */
+        {
+            /* If we made it to here, then the Target exists and is ready. */
+
+            if (cmd == AR6000_XIOCTL_TARGET_INFO) {
+                if (copy_to_user((A_UINT32 *)rq->ifr_data, &ar->arVersion.target_ver,
+                                 sizeof(ar->arVersion.target_ver)))
+                {
+                    ret = -EFAULT;
+                }
+                if (copy_to_user(((A_UINT32 *)rq->ifr_data)+1, &ar->arTargetType,
+                                 sizeof(ar->arTargetType)))
+                {
+                    ret = -EFAULT;
+                }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS:
+        {
+            WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD hbparam;
+
+            if (copy_from_user(&hbparam, userdata, sizeof(hbparam)))
+            {
+                ret = -EFAULT;
+            } else {
+                AR6000_SPIN_LOCK(&ar->arLock, 0);
+                /* Start a cyclic timer with the parameters provided. */
+                if (hbparam.frequency) {
+                    ar->arHBChallengeResp.frequency = hbparam.frequency;
+                }
+                if (hbparam.threshold) {
+                    ar->arHBChallengeResp.missThres = hbparam.threshold;
+                }
+
+                /* Delete the pending timer and start a new one */
+                if (timer_pending(&ar->arHBChallengeResp.timer)) {
+                    A_UNTIMEOUT(&ar->arHBChallengeResp.timer);
+                }
+                A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0);
+                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP:
+        {
+            A_UINT32 cookie;
+
+            if (copy_from_user(&cookie, userdata, sizeof(cookie))) {
+                return -EFAULT;
+            }
+
+            /* Send the challenge on the control channel */
+            if (wmi_get_challenge_resp_cmd(ar->arWmi, cookie, APP_HB_CHALLENGE) != A_OK) {
+                return -EIO;
+            }
+            break;
+        }
+#ifdef USER_KEYS
+        case AR6000_XIOCTL_USER_SETKEYS:
+        {
+
+            ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_RUN;
+
+            if (copy_from_user(&ar->user_key_ctrl, userdata,
+                               sizeof(ar->user_key_ctrl)))
+            {
+                return -EFAULT;
+            }
+
+            A_PRINTF("ar6000 USER set key %x\n", ar->user_key_ctrl);
+            break;
+        }
+#endif /* USER_KEYS */
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+        case AR6000_XIOCTL_GPIO_OUTPUT_SET:
+        {
+            struct ar6000_gpio_output_set_cmd_s gpio_output_set_cmd;
+
+            if (ar->arWmiReady == FALSE) {
+                return -EIO;
+            }
+            if (down_interruptible(&ar->arSem)) {
+                return -ERESTARTSYS;
+            }
+
+            if (copy_from_user(&gpio_output_set_cmd, userdata,
+                                sizeof(gpio_output_set_cmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                ret = ar6000_gpio_output_set(dev,
+                                             gpio_output_set_cmd.set_mask,
+                                             gpio_output_set_cmd.clear_mask,
+                                             gpio_output_set_cmd.enable_mask,
+                                             gpio_output_set_cmd.disable_mask);
+                if (ret != A_OK) {
+                    ret = EIO;
+                }
+            }
+            up(&ar->arSem);
+            break;
+        }
+        case AR6000_XIOCTL_GPIO_INPUT_GET:
+        {
+            if (ar->arWmiReady == FALSE) {
+                return -EIO;
+            }
+            if (down_interruptible(&ar->arSem)) {
+                return -ERESTARTSYS;
+            }
+
+            ret = ar6000_gpio_input_get(dev);
+            if (ret != A_OK) {
+                up(&ar->arSem);
+                return -EIO;
+            }
+
+            /* Wait for Target to respond. */
+            wait_event_interruptible(arEvent, gpio_data_available);
+            if (signal_pending(current)) {
+                ret = -EINTR;
+            } else {
+                A_ASSERT(gpio_reg_results.gpioreg_id == GPIO_ID_NONE);
+
+                if (copy_to_user(userdata, &gpio_reg_results.value,
+                                 sizeof(gpio_reg_results.value)))
+                {
+                    ret = -EFAULT;
+                }
+            }
+            up(&ar->arSem);
+            break;
+        }
+        case AR6000_XIOCTL_GPIO_REGISTER_SET:
+        {
+            struct ar6000_gpio_register_cmd_s gpio_register_cmd;
+
+            if (ar->arWmiReady == FALSE) {
+                return -EIO;
+            }
+            if (down_interruptible(&ar->arSem)) {
+                return -ERESTARTSYS;
+            }
+
+            if (copy_from_user(&gpio_register_cmd, userdata,
+                                sizeof(gpio_register_cmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                ret = ar6000_gpio_register_set(dev,
+                                               gpio_register_cmd.gpioreg_id,
+                                               gpio_register_cmd.value);
+                if (ret != A_OK) {
+                    ret = EIO;
+                }
+
+                /* Wait for acknowledgement from Target */
+                wait_event_interruptible(arEvent, gpio_ack_received);
+                if (signal_pending(current)) {
+                    ret = -EINTR;
+                }
+            }
+            up(&ar->arSem);
+            break;
+        }
+        case AR6000_XIOCTL_GPIO_REGISTER_GET:
+        {
+            struct ar6000_gpio_register_cmd_s gpio_register_cmd;
+
+            if (ar->arWmiReady == FALSE) {
+                return -EIO;
+            }
+            if (down_interruptible(&ar->arSem)) {
+                return -ERESTARTSYS;
+            }
+
+            if (copy_from_user(&gpio_register_cmd, userdata,
+                                sizeof(gpio_register_cmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                ret = ar6000_gpio_register_get(dev, gpio_register_cmd.gpioreg_id);
+                if (ret != A_OK) {
+                    up(&ar->arSem);
+                    return -EIO;
+                }
+
+                /* Wait for Target to respond. */
+                wait_event_interruptible(arEvent, gpio_data_available);
+                if (signal_pending(current)) {
+                    ret = -EINTR;
+                } else {
+                    A_ASSERT(gpio_register_cmd.gpioreg_id == gpio_reg_results.gpioreg_id);
+                    if (copy_to_user(userdata, &gpio_reg_results,
+                                     sizeof(gpio_reg_results)))
+                    {
+                        ret = -EFAULT;
+                    }
+                }
+            }
+            up(&ar->arSem);
+            break;
+        }
+        case AR6000_XIOCTL_GPIO_INTR_ACK:
+        {
+            struct ar6000_gpio_intr_ack_cmd_s gpio_intr_ack_cmd;
+
+            if (ar->arWmiReady == FALSE) {
+                return -EIO;
+            }
+            if (down_interruptible(&ar->arSem)) {
+                return -ERESTARTSYS;
+            }
+
+            if (copy_from_user(&gpio_intr_ack_cmd, userdata,
+                                sizeof(gpio_intr_ack_cmd)))
+            {
+                ret = -EFAULT;
+            } else {
+                ret = ar6000_gpio_intr_ack(dev, gpio_intr_ack_cmd.ack_mask);
+                if (ret != A_OK) {
+                    ret = EIO;
+                }
+            }
+            up(&ar->arSem);
+            break;
+        }
+        case AR6000_XIOCTL_GPIO_INTR_WAIT:
+        {
+            /* Wait for Target to report an interrupt. */
+            dev_hold(dev);
+            rtnl_unlock();
+            wait_event_interruptible(arEvent, gpio_intr_available);
+            rtnl_lock();
+            __dev_put(dev);
+
+            if (signal_pending(current)) {
+                ret = -EINTR;
+            } else {
+                if (copy_to_user(userdata, &gpio_intr_results,
+                                 sizeof(gpio_intr_results)))
+                {
+                    ret = -EFAULT;
+                }
+            }
+            break;
+        }
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+        case AR6000_XIOCTL_DBGLOG_CFG_MODULE:
+        {
+            struct ar6000_dbglog_module_config_s config;
+
+            if (copy_from_user(&config, userdata, sizeof(config))) {
+                return -EFAULT;
+            }
+
+            /* Send the challenge on the control channel */
+            if (wmi_config_debug_module_cmd(ar->arWmi, config.mmask,
+                                            config.tsr, config.rep,
+                                            config.size, config.valid) != A_OK)
+            {
+                return -EIO;
+            }
+            break;
+        }
+
+        case AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS:
+        {
+            /* Send the challenge on the control channel */
+            if (ar6000_dbglog_get_debug_logs(ar) != A_OK)
+            {
+                return -EIO;
+            }
+            break;
+        }
+
+        case AR6000_XIOCTL_SET_ADHOC_BSSID:
+        {
+            WMI_SET_ADHOC_BSSID_CMD adhocBssid;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&adhocBssid, userdata,
+                                      sizeof(adhocBssid)))
+            {
+                ret = -EFAULT;
+            } else if (A_MEMCMP(adhocBssid.bssid, bcast_mac,
+                                AR6000_ETH_ADDR_LEN) == 0)
+            {
+                ret = -EFAULT;
+            } else {
+
+                A_MEMCPY(ar->arReqBssid, adhocBssid.bssid, sizeof(ar->arReqBssid));
+        }
+            break;
+        }
+
+        case AR6000_XIOCTL_SET_OPT_MODE:
+        {
+        WMI_SET_OPT_MODE_CMD optModeCmd;
+            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&optModeCmd, userdata,
+                                      sizeof(optModeCmd)))
+            {
+                ret = -EFAULT;
+            } else if (ar->arConnected && optModeCmd.optMode == SPECIAL_ON) {
+                ret = -EFAULT;
+
+            } else if (wmi_set_opt_mode_cmd(ar->arWmi, optModeCmd.optMode)
+                       != A_OK)
+            {
+                ret = -EIO;
+            }
+            break;
+        }
+
+        case AR6000_XIOCTL_OPT_SEND_FRAME:
+        {
+        WMI_OPT_TX_FRAME_CMD optTxFrmCmd;
+            A_UINT8 data[MAX_OPT_DATA_LEN];
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&optTxFrmCmd, userdata,
+                                      sizeof(optTxFrmCmd)))
+            {
+                ret = -EFAULT;
+            } else if (copy_from_user(data,
+                                      userdata+sizeof(WMI_OPT_TX_FRAME_CMD)-1,
+                                      optTxFrmCmd.optIEDataLen))
+            {
+                ret = -EFAULT;
+            } else {
+                ret = wmi_opt_tx_frame_cmd(ar->arWmi,
+                                           optTxFrmCmd.frmType,
+                                           optTxFrmCmd.dstAddr,
+                                           optTxFrmCmd.bssid,
+                                           optTxFrmCmd.optIEDataLen,
+                                           data);
+            }
+
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SETRETRYLIMITS:
+        {
+            WMI_SET_RETRY_LIMITS_CMD setRetryParams;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&setRetryParams, userdata,
+                                      sizeof(setRetryParams)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_retry_limits_cmd(ar->arWmi, setRetryParams.frameType,
+                                          setRetryParams.trafficClass,
+                                          setRetryParams.maxRetries,
+                                          setRetryParams.enableNotify) != A_OK)
+                {
+                    ret = -EIO;
+                }
+                AR6000_SPIN_LOCK(&ar->arLock, 0);
+                ar->arMaxRetries = setRetryParams.maxRetries;
+                AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+            }
+            break;
+        }
+
+        case AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL:
+        {
+            WMI_BEACON_INT_CMD bIntvlCmd;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&bIntvlCmd, userdata,
+                       sizeof(bIntvlCmd)))
+            {
+                ret = -EFAULT;
+            } else if (wmi_set_adhoc_bconIntvl_cmd(ar->arWmi, bIntvlCmd.beaconInterval)
+                        != A_OK)
+            {
+                ret = -EIO;
+            }
+            break;
+        }
+        case IEEE80211_IOCTL_SETAUTHALG:
+        {
+            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+            struct ieee80211req_authalg req;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&req, userdata,
+                       sizeof(struct ieee80211req_authalg)))
+            {
+                ret = -EFAULT;
+            } else if (req.auth_alg == AUTH_ALG_OPEN_SYSTEM) {
+                ar->arDot11AuthMode  = OPEN_AUTH;
+                ar->arPairwiseCrypto  = NONE_CRYPT;
+                ar->arGroupCrypto     = NONE_CRYPT;
+            } else if (req.auth_alg == AUTH_ALG_LEAP) {
+                ar->arDot11AuthMode   = LEAP_AUTH;
+            } else {
+                ret = -EIO;
+            }
+            break;
+        }
+
+        case AR6000_XIOCTL_SET_VOICE_PKT_SIZE:
+            ret = ar6000_xioctl_set_voice_pkt_size(dev, userdata);
+            break;
+
+        case AR6000_XIOCTL_SET_MAX_SP:
+            ret = ar6000_xioctl_set_max_sp_len(dev, userdata);
+            break;
+
+        case AR6000_XIOCTL_WMI_GET_ROAM_TBL:
+            ret = ar6000_ioctl_get_roam_tbl(dev, rq);
+            break;
+        case AR6000_XIOCTL_WMI_SET_ROAM_CTRL:
+            ret = ar6000_ioctl_set_roam_ctrl(dev, userdata);
+            break;
+        case AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS:
+            ret = ar6000_ioctl_set_powersave_timers(dev, userdata);
+            break;
+        case AR6000_XIOCTRL_WMI_GET_POWER_MODE:
+            ret = ar6000_ioctl_get_power_mode(dev, rq);
+            break;
+        case AR6000_XIOCTRL_WMI_SET_WLAN_STATE:
+            get_user(ar->arWlanState, (unsigned int *)userdata);
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+                break;
+            }
+
+            if (ar->arWlanState == WLAN_ENABLED) {
+                /* Enable foreground scanning */
+                if (wmi_scanparams_cmd(ar->arWmi, scParams.fg_start_period,
+                                       scParams.fg_end_period,
+                                       scParams.bg_period,
+                                       scParams.minact_chdwell_time,
+                                       scParams.maxact_chdwell_time,
+                                       scParams.pas_chdwell_time,
+                                       scParams.shortScanRatio,
+                                       scParams.scanCtrlFlags,
+                                       scParams.max_dfsch_act_time) != A_OK)
+                {
+                    ret = -EIO;
+                }
+                if (ar->arSsidLen) {
+                    ar->arConnectPending = TRUE;
+                    if (wmi_connect_cmd(ar->arWmi, ar->arNetworkType,
+                                        ar->arDot11AuthMode, ar->arAuthMode,
+                                        ar->arPairwiseCrypto,
+                                        ar->arPairwiseCryptoLen,
+                                        ar->arGroupCrypto, ar->arGroupCryptoLen,
+                                        ar->arSsidLen, ar->arSsid,
+                                        ar->arReqBssid, ar->arChannelHint,
+                                        ar->arConnectCtrlFlags) != A_OK)
+                    {
+                        ret = -EIO;
+                        ar->arConnectPending = FALSE;
+                    }
+                }
+            } else {
+                /* Disconnect from the AP and disable foreground scanning */
+                AR6000_SPIN_LOCK(&ar->arLock, 0);
+                if (ar->arConnected == TRUE || ar->arConnectPending == TRUE) {
+                    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+                    wmi_disconnect_cmd(ar->arWmi);
+                } else {
+                    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+                }
+
+                if (wmi_scanparams_cmd(ar->arWmi, 0xFFFF, 0, 0, 0, 0, 0, 0, 0xFF, 0) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        case AR6000_XIOCTL_WMI_GET_ROAM_DATA:
+            ret = ar6000_ioctl_get_roam_data(dev, rq);
+            break;
+        case AR6000_XIOCTL_WMI_SET_BT_STATUS:
+            ret = ar6000_xioctl_set_bt_status_cmd(dev, userdata);
+            break;
+        case AR6000_XIOCTL_WMI_SET_BT_PARAMS:
+            ret = ar6000_xioctl_set_bt_params_cmd(dev, userdata);
+            break;
+        case AR6000_XIOCTL_WMI_STARTSCAN:
+        {
+            WMI_START_SCAN_CMD setStartScanCmd;
+
+            if (ar->arWmiReady == FALSE) {
+                    ret = -EIO;
+                } else if (copy_from_user(&setStartScanCmd, userdata,
+                                          sizeof(setStartScanCmd)))
+                {
+                    ret = -EFAULT;
+                } else {
+                    if (wmi_startscan_cmd(ar->arWmi, setStartScanCmd.scanType,
+                                    setStartScanCmd.forceFgScan,
+                                    setStartScanCmd.isLegacy,
+                                    setStartScanCmd.homeDwellTime,
+                                    setStartScanCmd.forceScanInterval) != A_OK)
+                    {
+                        ret = -EIO;
+                    }
+                }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SETFIXRATES:
+        {
+            WMI_FIX_RATES_CMD setFixRatesCmd;
+            A_STATUS returnStatus;
+
+            if (ar->arWmiReady == FALSE) {
+                    ret = -EIO;
+                } else if (copy_from_user(&setFixRatesCmd, userdata,
+                                          sizeof(setFixRatesCmd)))
+                {
+                    ret = -EFAULT;
+                } else {
+                    returnStatus = wmi_set_fixrates_cmd(ar->arWmi, setFixRatesCmd.fixRateMask);
+                    if (returnStatus == A_EINVAL)
+                    {
+                        ret = -EINVAL;
+                    }
+                    else if(returnStatus != A_OK) {
+                        ret = -EIO;
+                    }
+                }
+            break;
+        }
+
+        case AR6000_XIOCTL_WMI_GETFIXRATES:
+        {
+            WMI_FIX_RATES_CMD getFixRatesCmd;
+            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+            int ret = 0;
+
+            if (ar->arWmiReady == FALSE) {
+                return -EIO;
+            }
+
+            if (down_interruptible(&ar->arSem)) {
+                return -ERESTARTSYS;
+            }
+            /* Used copy_from_user/copy_to_user to access user space data */
+            if (copy_from_user(&getFixRatesCmd, userdata, sizeof(getFixRatesCmd))) {
+                ret = -EFAULT;
+            } else {
+                ar->arRateMask = 0xFFFF;
+
+                if (wmi_get_ratemask_cmd(ar->arWmi) != A_OK) {
+                    up(&ar->arSem);
+                    return -EIO;
+                }
+
+                wait_event_interruptible_timeout(arEvent, ar->arRateMask != 0xFFFF, wmitimeout * HZ);
+
+                if (signal_pending(current)) {
+                    ret = -EINTR;
+                }
+
+                if (!ret) {
+                    getFixRatesCmd.fixRateMask = ar->arRateMask;
+                }
+
+                if(copy_to_user(userdata, &getFixRatesCmd, sizeof(getFixRatesCmd))) {
+                   ret = -EFAULT;
+                }
+
+                up(&ar->arSem);
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_AUTHMODE:
+        {
+            WMI_SET_AUTH_MODE_CMD setAuthMode;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&setAuthMode, userdata,
+                                      sizeof(setAuthMode)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_authmode_cmd(ar->arWmi, setAuthMode.mode) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_REASSOCMODE:
+        {
+            WMI_SET_REASSOC_MODE_CMD setReassocMode;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&setReassocMode, userdata,
+                                      sizeof(setReassocMode)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_reassocmode_cmd(ar->arWmi, setReassocMode.mode) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_DIAG_READ:
+        {
+            A_UINT32 addr, data;
+            get_user(addr, (unsigned int *)userdata);
+            if (ar6000_ReadRegDiag(ar->arHifDevice, &addr, &data) != A_OK) {
+                ret = -EIO;
+            }
+            put_user(data, (unsigned int *)userdata + 1);
+            break;
+        }
+        case AR6000_XIOCTL_DIAG_WRITE:
+        {
+            A_UINT32 addr, data;
+            get_user(addr, (unsigned int *)userdata);
+            get_user(data, (unsigned int *)userdata + 1);
+            if (ar6000_WriteRegDiag(ar->arHifDevice, &addr, &data) != A_OK) {
+                ret = -EIO;
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_KEEPALIVE:
+        {
+             WMI_SET_KEEPALIVE_CMD setKeepAlive;
+             if (ar->arWmiReady == FALSE) {
+                 return -EIO;
+             } else if (copy_from_user(&setKeepAlive, userdata,
+                        sizeof(setKeepAlive))){
+                 ret = -EFAULT;
+             } else {
+                 if (wmi_set_keepalive_cmd(ar->arWmi, setKeepAlive.keepaliveInterval) != A_OK) {
+                     ret = -EIO;
+               }
+             }
+             break;
+        }
+        case AR6000_XIOCTL_WMI_GET_KEEPALIVE:
+        {
+            AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+            WMI_GET_KEEPALIVE_CMD getKeepAlive;
+            int ret = 0;
+            if (ar->arWmiReady == FALSE) {
+               return -EIO;
+            }
+            if (down_interruptible(&ar->arSem)) {
+                return -ERESTARTSYS;
+            }
+            if (copy_from_user(&getKeepAlive, userdata,sizeof(getKeepAlive))) {
+               ret = -EFAULT;
+            } else {
+            getKeepAlive.keepaliveInterval = wmi_get_keepalive_cmd(ar->arWmi);
+            ar->arKeepaliveConfigured = 0xFF;
+            if (wmi_get_keepalive_configured(ar->arWmi) != A_OK){
+                up(&ar->arSem);
+                return -EIO;
+            }
+            wait_event_interruptible_timeout(arEvent, ar->arKeepaliveConfigured != 0xFF, wmitimeout * HZ);
+            if (signal_pending(current)) {
+                ret = -EINTR;
+            }
+
+            if (!ret) {
+                getKeepAlive.configured = ar->arKeepaliveConfigured;
+            }
+            if (copy_to_user(userdata, &getKeepAlive, sizeof(getKeepAlive))) {
+               ret = -EFAULT;
+            }
+            up(&ar->arSem);
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_APPIE:
+        {
+            WMI_SET_APPIE_CMD appIEcmd;
+            A_UINT8           appIeInfo[IEEE80211_APPIE_FRAME_MAX_LEN];
+            A_UINT32            fType,ieLen;
+
+	    if (ar->arWmiReady == FALSE) {
+		    return -EIO;
+	    }
+	    get_user(fType, (A_UINT32 *)userdata);
+	    appIEcmd.mgmtFrmType = fType;
+	    if (appIEcmd.mgmtFrmType >= IEEE80211_APPIE_NUM_OF_FRAME) {
+		    ret = -EIO;
+	    } else {
+		    get_user(ieLen, (A_UINT32 *)(userdata + 4));
+		    appIEcmd.ieLen = ieLen;
+		    if (appIEcmd.ieLen > IEEE80211_APPIE_FRAME_MAX_LEN) {
+			    ret = -EIO;
+			    break;
+		    }
+		    if (copy_from_user(appIeInfo, userdata + 8, appIEcmd.ieLen)) {
+			    ret = -EFAULT;
+		    } else {
+			    if (wmi_set_appie_cmd(ar->arWmi, appIEcmd.mgmtFrmType,
+						  appIEcmd.ieLen,  appIeInfo) != A_OK)
+			    {
+				    ret = -EIO;
+			    }
+		    }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER:
+        {
+            WMI_BSS_FILTER_CMD cmd;
+            A_UINT32    filterType;
+
+            if (copy_from_user(&filterType, userdata, sizeof(A_UINT32)))
+            {
+                return -EFAULT;
+            }
+            if (filterType & (IEEE80211_FILTER_TYPE_BEACON |
+                                    IEEE80211_FILTER_TYPE_PROBE_RESP))
+            {
+                cmd.bssFilter = ALL_BSS_FILTER;
+            } else {
+                cmd.bssFilter = NONE_BSS_FILTER;
+            }
+            if (wmi_bssfilter_cmd(ar->arWmi, cmd.bssFilter, 0) != A_OK) {
+                ret = -EIO;
+            }
+
+            AR6000_SPIN_LOCK(&ar->arLock, 0);
+            ar->arMgmtFilter = filterType;
+            AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_WSC_STATUS:
+        {
+            A_UINT32    wsc_status;
+
+            if (copy_from_user(&wsc_status, userdata, sizeof(A_UINT32)))
+            {
+                return -EFAULT;
+            }
+            if (wmi_set_wsc_status_cmd(ar->arWmi, wsc_status) != A_OK) {
+                ret = -EIO;
+            }
+            break;
+        }
+        case AR6000_XIOCTL_BMI_ROMPATCH_INSTALL:
+        {
+            A_UINT32 ROM_addr;
+            A_UINT32 RAM_addr;
+            A_UINT32 nbytes;
+            A_UINT32 do_activate;
+            A_UINT32 rompatch_id;
+
+            get_user(ROM_addr, (A_UINT32 *)userdata);
+            get_user(RAM_addr, (A_UINT32 *)userdata + 1);
+            get_user(nbytes, (A_UINT32 *)userdata + 2);
+            get_user(do_activate, (A_UINT32 *)userdata + 3);
+            AR_DEBUG_PRINTF("Install rompatch from ROM: 0x%x to RAM: 0x%x  length: %d\n",
+                             ROM_addr, RAM_addr, nbytes);
+            ret = BMIrompatchInstall(hifDevice, ROM_addr, RAM_addr,
+                                        nbytes, do_activate, &rompatch_id);
+            if (ret == A_OK) {
+                put_user(rompatch_id, (unsigned int *)rq->ifr_data); /* return value */
+            }
+            break;
+        }
+
+        case AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL:
+        {
+            A_UINT32 rompatch_id;
+
+            get_user(rompatch_id, (A_UINT32 *)userdata);
+            AR_DEBUG_PRINTF("UNinstall rompatch_id %d\n", rompatch_id);
+            ret = BMIrompatchUninstall(hifDevice, rompatch_id);
+            break;
+        }
+
+        case AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE:
+        case AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE:
+        {
+            A_UINT32 rompatch_count;
+
+            get_user(rompatch_count, (A_UINT32 *)userdata);
+            AR_DEBUG_PRINTF("Change rompatch activation count=%d\n", rompatch_count);
+            length = sizeof(A_UINT32) * rompatch_count;
+            if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
+                A_MEMZERO(buffer, length);
+                if (copy_from_user(buffer, &userdata[sizeof(rompatch_count)], length))
+                {
+                    ret = -EFAULT;
+                } else {
+                    if (cmd == AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE) {
+                        ret = BMIrompatchActivate(hifDevice, rompatch_count, (A_UINT32 *)buffer);
+                    } else {
+                        ret = BMIrompatchDeactivate(hifDevice, rompatch_count, (A_UINT32 *)buffer);
+                    }
+                }
+                A_FREE(buffer);
+            } else {
+                ret = -ENOMEM;
+            }
+
+            break;
+        }
+
+        case AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE:
+        {
+            WMI_SET_HOST_SLEEP_MODE_CMD setHostSleepMode;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&setHostSleepMode, userdata,
+                                      sizeof(setHostSleepMode)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_host_sleep_mode_cmd(ar->arWmi,
+                                &setHostSleepMode) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_SET_WOW_MODE:
+        {
+            WMI_SET_WOW_MODE_CMD setWowMode;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&setWowMode, userdata,
+                                      sizeof(setWowMode)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_wow_mode_cmd(ar->arWmi,
+                                &setWowMode) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_GET_WOW_LIST:
+        {
+            WMI_GET_WOW_LIST_CMD getWowList;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&getWowList, userdata,
+                                      sizeof(getWowList)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_get_wow_list_cmd(ar->arWmi,
+                                &getWowList) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_WMI_ADD_WOW_PATTERN:
+        {
+#define WOW_PATTERN_SIZE 64
+#define WOW_MASK_SIZE 64
+
+            WMI_ADD_WOW_PATTERN_CMD cmd;
+            A_UINT8 mask_data[WOW_PATTERN_SIZE]={0};
+            A_UINT8 pattern_data[WOW_PATTERN_SIZE]={0};
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else {
+
+                if(copy_from_user(&cmd, userdata,
+                            sizeof(WMI_ADD_WOW_PATTERN_CMD)))
+                      return -EFAULT;
+                if (copy_from_user(pattern_data,
+                                      userdata + 3,
+                                      cmd.filter_size)){
+                        ret = -EFAULT;
+                        break;
+                }
+                if (copy_from_user(mask_data,
+                                      (userdata + 3 + cmd.filter_size),
+                                      cmd.filter_size)){
+                        ret = -EFAULT;
+                        break;
+                } else {
+                    if (wmi_add_wow_pattern_cmd(ar->arWmi,
+                                &cmd, pattern_data, mask_data, cmd.filter_size) != A_OK){
+                        ret = -EIO;
+                    }
+                }
+            }
+#undef WOW_PATTERN_SIZE
+#undef WOW_MASK_SIZE
+            break;
+        }
+        case AR6000_XIOCTL_WMI_DEL_WOW_PATTERN:
+        {
+            WMI_DEL_WOW_PATTERN_CMD delWowPattern;
+
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&delWowPattern, userdata,
+                                      sizeof(delWowPattern)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_del_wow_pattern_cmd(ar->arWmi,
+                                &delWowPattern) != A_OK)
+                {
+                    ret = -EIO;
+                }
+            }
+            break;
+        }
+        case AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE:
+            if (ar->arHtcTarget != NULL) {
+                HTCDumpCreditStates(ar->arHtcTarget);
+            }
+            break;
+        case AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE:
+            if (ar->arHtcTarget != NULL) {
+                struct ar6000_traffic_activity_change data;
+
+                if (copy_from_user(&data, userdata, sizeof(data)))
+                {
+                    return -EFAULT;
+                }
+                    /* note, this is used for testing (mbox ping testing), indicate activity
+                     * change using the stream ID as the traffic class */
+                ar6000_indicate_tx_activity(ar,
+                                            (A_UINT8)data.StreamID,
+                                            data.Active ? TRUE : FALSE);
+            }
+            break;
+        case AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS:
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&connectCtrlFlags, userdata,
+                                      sizeof(connectCtrlFlags)))
+            {
+                ret = -EFAULT;
+            } else {
+                ar->arConnectCtrlFlags = connectCtrlFlags;
+            }
+            break;
+        case AR6000_XIOCTL_WMI_SET_AKMP_PARAMS:
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else if (copy_from_user(&akmpParams, userdata,
+                                      sizeof(WMI_SET_AKMP_PARAMS_CMD)))
+            {
+                ret = -EFAULT;
+            } else {
+                if (wmi_set_akmp_params_cmd(ar->arWmi, &akmpParams) != A_OK) {
+                    ret = -EIO;
+                }
+            }
+            break;
+        case AR6000_XIOCTL_WMI_SET_PMKID_LIST:
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else {
+                if (copy_from_user(&pmkidInfo.numPMKID, userdata,
+                                      sizeof(pmkidInfo.numPMKID)))
+                {
+                    ret = -EFAULT;
+                    break;
+                }
+                if (copy_from_user(&pmkidInfo.pmkidList,
+                                   userdata + sizeof(pmkidInfo.numPMKID),
+                                   pmkidInfo.numPMKID * sizeof(WMI_PMKID)))
+                {
+                    ret = -EFAULT;
+                    break;
+                }
+                if (wmi_set_pmkid_list_cmd(ar->arWmi, &pmkidInfo) != A_OK) {
+                    ret = -EIO;
+                }
+            }
+            break;
+        case AR6000_XIOCTL_WMI_GET_PMKID_LIST:
+            if (ar->arWmiReady == FALSE) {
+                ret = -EIO;
+            } else  {
+                if (wmi_get_pmkid_list_cmd(ar->arWmi) != A_OK) {
+                    ret = -EIO;
+                }
+            }
+            break;
+        default:
+            ret = -EOPNOTSUPP;
+    }
+    return ret;
+}
+
diff --git a/drivers/ar6000/ar6000/netbuf.c b/drivers/ar6000/ar6000/netbuf.c
new file mode 100644
index 00000000000..97b273b3ac1
--- /dev/null
+++ b/drivers/ar6000/ar6000/netbuf.c
@@ -0,0 +1,225 @@
+
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+#include <a_config.h>
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "htc_packet.h"
+
+#define AR6000_DATA_OFFSET    64
+
+void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt)
+{
+    skb_queue_tail((struct sk_buff_head *) q, (struct sk_buff *) pkt);
+}
+
+void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt)
+{
+    skb_queue_head((struct sk_buff_head *) q, (struct sk_buff *) pkt);
+}
+
+void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q)
+{
+    return((void *) skb_dequeue((struct sk_buff_head *) q));
+}
+
+int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q)
+{
+    return(skb_queue_len((struct sk_buff_head *) q));
+}
+
+int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q)
+{
+    return(skb_queue_empty((struct sk_buff_head *) q));
+}
+
+void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q)
+{
+    skb_queue_head_init((struct sk_buff_head *) q);
+}
+
+void *
+a_netbuf_alloc(int size)
+{
+    struct sk_buff *skb;
+    skb = dev_alloc_skb(AR6000_DATA_OFFSET + sizeof(HTC_PACKET) + size);
+    skb_reserve(skb, AR6000_DATA_OFFSET + sizeof(HTC_PACKET));
+    return ((void *)skb);
+}
+
+/*
+ * Allocate an SKB w.o. any encapsulation requirement.
+ */
+void *
+a_netbuf_alloc_raw(int size)
+{
+    struct sk_buff *skb;
+
+    skb = dev_alloc_skb(size);
+
+    return ((void *)skb);
+}
+
+void
+a_netbuf_free(void *bufPtr)
+{
+    struct sk_buff *skb = (struct sk_buff *)bufPtr;
+
+    dev_kfree_skb(skb);
+}
+
+A_UINT32
+a_netbuf_to_len(void *bufPtr)
+{
+    return (((struct sk_buff *)bufPtr)->len);
+}
+
+void *
+a_netbuf_to_data(void *bufPtr)
+{
+    return (((struct sk_buff *)bufPtr)->data);
+}
+
+/*
+ * Add len # of bytes to the beginning of the network buffer
+ * pointed to by bufPtr
+ */
+A_STATUS
+a_netbuf_push(void *bufPtr, A_INT32 len)
+{
+    skb_push((struct sk_buff *)bufPtr, len);
+
+    return A_OK;
+}
+
+/*
+ * Add len # of bytes to the beginning of the network buffer
+ * pointed to by bufPtr and also fill with data
+ */
+A_STATUS
+a_netbuf_push_data(void *bufPtr, char *srcPtr, A_INT32 len)
+{
+    skb_push((struct sk_buff *) bufPtr, len);
+    A_MEMCPY(((struct sk_buff *)bufPtr)->data, srcPtr, len);
+
+    return A_OK;
+}
+
+/*
+ * Add len # of bytes to the end of the network buffer
+ * pointed to by bufPtr
+ */
+A_STATUS
+a_netbuf_put(void *bufPtr, A_INT32 len)
+{
+    skb_put((struct sk_buff *)bufPtr, len);
+
+    return A_OK;
+}
+
+/*
+ * Add len # of bytes to the end of the network buffer
+ * pointed to by bufPtr and also fill with data
+ */
+A_STATUS
+a_netbuf_put_data(void *bufPtr, char *srcPtr, A_INT32 len)
+{
+    char *start = ((struct sk_buff *)bufPtr)->data +
+        ((struct sk_buff *)bufPtr)->len;
+    skb_put((struct sk_buff *)bufPtr, len);
+    A_MEMCPY(start, srcPtr, len);
+
+    return A_OK;
+}
+
+
+/*
+ * Trim the network buffer pointed to by bufPtr to len # of bytes
+ */
+A_STATUS
+a_netbuf_setlen(void *bufPtr, A_INT32 len)
+{
+    skb_trim((struct sk_buff *)bufPtr, len);
+
+    return A_OK;
+}
+
+/*
+ * Chop of len # of bytes from the end of the buffer.
+ */
+A_STATUS
+a_netbuf_trim(void *bufPtr, A_INT32 len)
+{
+    skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len);
+
+    return A_OK;
+}
+
+/*
+ * Chop of len # of bytes from the end of the buffer and return the data.
+ */
+A_STATUS
+a_netbuf_trim_data(void *bufPtr, char *dstPtr, A_INT32 len)
+{
+    char *start = ((struct sk_buff *)bufPtr)->data +
+        (((struct sk_buff *)bufPtr)->len - len);
+
+    A_MEMCPY(dstPtr, start, len);
+    skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len);
+
+    return A_OK;
+}
+
+
+/*
+ * Returns the number of bytes available to a a_netbuf_push()
+ */
+A_INT32
+a_netbuf_headroom(void *bufPtr)
+{
+    return (skb_headroom((struct sk_buff *)bufPtr));
+}
+
+/*
+ * Removes specified number of bytes from the beginning of the buffer
+ */
+A_STATUS
+a_netbuf_pull(void *bufPtr, A_INT32 len)
+{
+    skb_pull((struct sk_buff *)bufPtr, len);
+
+    return A_OK;
+}
+
+/*
+ * Removes specified number of bytes from the beginning of the buffer
+ * and return the data
+ */
+A_STATUS
+a_netbuf_pull_data(void *bufPtr, char *dstPtr, A_INT32 len)
+{
+    A_MEMCPY(dstPtr, ((struct sk_buff *)bufPtr)->data, len);
+    skb_pull((struct sk_buff *)bufPtr, len);
+
+    return A_OK;
+}
+
diff --git a/drivers/ar6000/ar6000/osapi_linux.h b/drivers/ar6000/ar6000/osapi_linux.h
new file mode 100644
index 00000000000..5b64212a27c
--- /dev/null
+++ b/drivers/ar6000/ar6000/osapi_linux.h
@@ -0,0 +1,319 @@
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/osapi_linux.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _OSAPI_LINUX_H_
+#define _OSAPI_LINUX_H_
+
+#ifdef __KERNEL__
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+#include <linux/jiffies.h>
+#endif
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#ifdef KERNEL_2_4
+#include <asm/arch/irq.h>
+#include <asm/irq.h>
+#endif
+
+#ifdef __GNUC__
+#define __ATTRIB_PACK           __attribute__ ((packed))
+#define __ATTRIB_PRINTF         __attribute__ ((format (printf, 1, 2)))
+#define __ATTRIB_NORETURN       __attribute__ ((noreturn))
+#ifndef INLINE
+#define INLINE                  __inline__
+#endif
+#else /* Not GCC */
+#define __ATTRIB_PACK
+#define __ATTRIB_PRINTF
+#define __ATTRIB_NORETURN
+#ifndef INLINE
+#define INLINE                  __inline
+#endif
+#endif /* End __GNUC__ */
+
+#define PREPACK
+#define POSTPACK                __ATTRIB_PACK
+
+/*
+ * Endianes macros
+ */
+#define A_BE2CPU8(x)       ntohb(x)
+#define A_BE2CPU16(x)      ntohs(x)
+#define A_BE2CPU32(x)      ntohl(x)
+
+#define A_LE2CPU8(x)       (x)
+#define A_LE2CPU16(x)      (x)
+#define A_LE2CPU32(x)      (x)
+
+#define A_CPU2BE8(x)       htonb(x)
+#define A_CPU2BE16(x)      htons(x)
+#define A_CPU2BE32(x)      htonl(x)
+
+#define A_MEMCPY(dst, src, len)         memcpy((A_UINT8 *)(dst), (src), (len))
+#define A_MEMZERO(addr, len)            memset(addr, 0, len)
+#define A_MEMCMP(addr1, addr2, len)     memcmp((addr1), (addr2), (len))
+#define A_MALLOC(size)                  kmalloc((size), GFP_KERNEL)
+#define A_MALLOC_NOWAIT(size)           kmalloc((size), GFP_ATOMIC)
+#define A_FREE(addr)                    kfree(addr)
+#define A_PRINTF(args...)               printk(args)
+
+/* Mutual Exclusion */
+typedef spinlock_t                      A_MUTEX_T;
+#define A_MUTEX_INIT(mutex)             spin_lock_init(mutex)
+#define A_MUTEX_LOCK(mutex)             spin_lock_bh(mutex)
+#define A_MUTEX_UNLOCK(mutex)           spin_unlock_bh(mutex)
+#define A_IS_MUTEX_VALID(mutex)         TRUE  /* okay to return true, since A_MUTEX_DELETE does nothing */
+#define A_MUTEX_DELETE(mutex)           /* spin locks are not kernel resources so nothing to free.. */
+
+/* Get current time in ms adding a constant offset (in ms) */
+#define A_GET_MS(offset)    \
+	(jiffies + ((offset) / 1000) * HZ)
+
+/*
+ * Timer Functions
+ */
+#define A_MDELAY(msecs)                 mdelay(msecs)
+typedef struct timer_list               A_TIMER;
+
+#define A_INIT_TIMER(pTimer, pFunction, pArg) do {              \
+    init_timer(pTimer);                                         \
+    (pTimer)->function = (pFunction);                           \
+    (pTimer)->data   = (unsigned long)(pArg);                   \
+} while (0)
+
+/*
+ * Start a Timer that elapses after 'periodMSec' milli-seconds
+ * Support is provided for a one-shot timer. The 'repeatFlag' is
+ * ignored.
+ */
+#define A_TIMEOUT_MS(pTimer, periodMSec, repeatFlag) do {                   \
+    if (repeatFlag) {                                                       \
+        printk("\n" __FILE__ ":%d: Timer Repeat requested\n",__LINE__);     \
+        panic("Timer Repeat");                                              \
+    }                                                                       \
+    mod_timer((pTimer), jiffies + HZ * (periodMSec) / 1000);                \
+} while (0)
+
+/*
+ * Cancel the Timer.
+ */
+#define A_UNTIMEOUT(pTimer) do {                                \
+    del_timer((pTimer));                                        \
+} while (0)
+
+#define A_DELETE_TIMER(pTimer) do {                             \
+} while (0)
+
+/*
+ * Wait Queue related functions
+ */
+typedef wait_queue_head_t               A_WAITQUEUE_HEAD;
+#define A_INIT_WAITQUEUE_HEAD(head)     init_waitqueue_head(head)
+#ifndef wait_event_interruptible_timeout
+#define __wait_event_interruptible_timeout(wq, condition, ret)          \
+do {                                                                    \
+        wait_queue_t __wait;                                            \
+        init_waitqueue_entry(&__wait, current);                         \
+                                                                        \
+        add_wait_queue(&wq, &__wait);                                   \
+        for (;;) {                                                      \
+                set_current_state(TASK_INTERRUPTIBLE);                  \
+                if (condition)                                          \
+                        break;                                          \
+                if (!signal_pending(current)) {                         \
+                        ret = schedule_timeout(ret);                    \
+                        if (!ret)                                       \
+                                break;                                  \
+                        continue;                                       \
+                }                                                       \
+                ret = -ERESTARTSYS;                                     \
+                break;                                                  \
+        }                                                               \
+        current->state = TASK_RUNNING;                                  \
+        remove_wait_queue(&wq, &__wait);                                \
+} while (0)
+
+#define wait_event_interruptible_timeout(wq, condition, timeout)        \
+({                                                                      \
+        long __ret = timeout;                                           \
+        if (!(condition))                                               \
+                __wait_event_interruptible_timeout(wq, condition, __ret); \
+        __ret;                                                          \
+})
+#endif /* wait_event_interruptible_timeout */
+
+#define A_WAIT_EVENT_INTERRUPTIBLE_TIMEOUT(head, condition, timeout) do { \
+    wait_event_interruptible_timeout(head, condition, timeout); \
+} while (0)
+
+#define A_WAKE_UP(head)                 wake_up(head)
+
+#ifdef DEBUG
+#define A_ASSERT(expr)  \
+    if (!(expr)) {   \
+        printk(KERN_ALERT "\n" __FILE__ ":%d: Assertion " #expr " failed!\n",__LINE__); \
+        panic(#expr); \
+    }
+
+#else
+#define A_ASSERT(expr)
+#endif /* DEBUG */
+
+/*
+ * Initialization of the network buffer subsystem
+ */
+#define A_NETBUF_INIT()
+
+/*
+ * Network buffer queue support
+ */
+typedef struct sk_buff_head A_NETBUF_QUEUE_T;
+
+#define A_NETBUF_QUEUE_INIT(q)  \
+    a_netbuf_queue_init(q)
+
+#define A_NETBUF_ENQUEUE(q, pkt) \
+    a_netbuf_enqueue((q), (pkt))
+#define A_NETBUF_PREQUEUE(q, pkt) \
+    a_netbuf_prequeue((q), (pkt))
+#define A_NETBUF_DEQUEUE(q) \
+    (a_netbuf_dequeue(q))
+#define A_NETBUF_QUEUE_SIZE(q)  \
+    a_netbuf_queue_size(q)
+#define A_NETBUF_QUEUE_EMPTY(q) \
+    a_netbuf_queue_empty(q)
+
+/*
+ * Network buffer support
+ */
+#define A_NETBUF_ALLOC(size) \
+    a_netbuf_alloc(size)
+#define A_NETBUF_ALLOC_RAW(size) \
+    a_netbuf_alloc_raw(size)
+#define A_NETBUF_FREE(bufPtr) \
+    a_netbuf_free(bufPtr)
+#define A_NETBUF_DATA(bufPtr) \
+    a_netbuf_to_data(bufPtr)
+#define A_NETBUF_LEN(bufPtr) \
+    a_netbuf_to_len(bufPtr)
+#define A_NETBUF_PUSH(bufPtr, len) \
+    a_netbuf_push(bufPtr, len)
+#define A_NETBUF_PUT(bufPtr, len) \
+    a_netbuf_put(bufPtr, len)
+#define A_NETBUF_TRIM(bufPtr,len) \
+    a_netbuf_trim(bufPtr, len)
+#define A_NETBUF_PULL(bufPtr, len) \
+    a_netbuf_pull(bufPtr, len)
+#define A_NETBUF_HEADROOM(bufPtr)\
+    a_netbuf_headroom(bufPtr)
+#define A_NETBUF_SETLEN(bufPtr,len) \
+    a_netbuf_setlen(bufPtr, len)
+
+/* Add data to end of a buffer  */
+#define A_NETBUF_PUT_DATA(bufPtr, srcPtr,  len) \
+    a_netbuf_put_data(bufPtr, srcPtr, len)
+
+/* Add data to start of the  buffer */
+#define A_NETBUF_PUSH_DATA(bufPtr, srcPtr,  len) \
+    a_netbuf_push_data(bufPtr, srcPtr, len)
+
+/* Remove data at start of the buffer */
+#define A_NETBUF_PULL_DATA(bufPtr, dstPtr, len) \
+    a_netbuf_pull_data(bufPtr, dstPtr, len)
+
+/* Remove data from the end of the buffer */
+#define A_NETBUF_TRIM_DATA(bufPtr, dstPtr, len) \
+    a_netbuf_trim_data(bufPtr, dstPtr, len)
+
+/* View data as "size" contiguous bytes of type "t" */
+#define A_NETBUF_VIEW_DATA(bufPtr, t, size) \
+    (t )( ((struct skbuf *)(bufPtr))->data)
+
+/* return the beginning of the headroom for the buffer */
+#define A_NETBUF_HEAD(bufPtr) \
+        ((((struct sk_buff *)(bufPtr))->head))
+
+/*
+ * OS specific network buffer access routines
+ */
+void *a_netbuf_alloc(int size);
+void *a_netbuf_alloc_raw(int size);
+void a_netbuf_free(void *bufPtr);
+void *a_netbuf_to_data(void *bufPtr);
+A_UINT32 a_netbuf_to_len(void *bufPtr);
+A_STATUS a_netbuf_push(void *bufPtr, A_INT32 len);
+A_STATUS a_netbuf_push_data(void *bufPtr, char *srcPtr, A_INT32 len);
+A_STATUS a_netbuf_put(void *bufPtr, A_INT32 len);
+A_STATUS a_netbuf_put_data(void *bufPtr, char *srcPtr, A_INT32 len);
+A_STATUS a_netbuf_pull(void *bufPtr, A_INT32 len);
+A_STATUS a_netbuf_pull_data(void *bufPtr, char *dstPtr, A_INT32 len);
+A_STATUS a_netbuf_trim(void *bufPtr, A_INT32 len);
+A_STATUS a_netbuf_trim_data(void *bufPtr, char *dstPtr, A_INT32 len);
+A_STATUS a_netbuf_setlen(void *bufPtr, A_INT32 len);
+A_INT32 a_netbuf_headroom(void *bufPtr);
+void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt);
+void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt);
+void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q);
+int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q);
+int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q);
+int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q);
+void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q);
+
+/*
+ * Kernel v.s User space functions
+ */
+A_UINT32 a_copy_to_user(void *to, const void *from, A_UINT32 n);
+A_UINT32 a_copy_from_user(void *to, const void *from, A_UINT32 n);
+
+#else /* __KERNEL__ */
+
+#ifdef __GNUC__
+#define __ATTRIB_PACK           __attribute__ ((packed))
+#define __ATTRIB_PRINTF         __attribute__ ((format (printf, 1, 2)))
+#define __ATTRIB_NORETURN       __attribute__ ((noreturn))
+#ifndef INLINE
+#define INLINE                  __inline__
+#endif
+#else /* Not GCC */
+#define __ATTRIB_PACK
+#define __ATTRIB_PRINTF
+#define __ATTRIB_NORETURN
+#ifndef INLINE
+#define INLINE                  __inline
+#endif
+#endif /* End __GNUC__ */
+
+#define PREPACK
+#define POSTPACK                __ATTRIB_PACK
+
+#endif /* __KERNEL__ */
+
+#endif /* _OSAPI_LINUX_H_ */
diff --git a/drivers/ar6000/ar6000/wireless_ext.c b/drivers/ar6000/ar6000/wireless_ext.c
new file mode 100644
index 00000000000..af78ae05fcb
--- /dev/null
+++ b/drivers/ar6000/ar6000/wireless_ext.c
@@ -0,0 +1,1979 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "ar6000_drv.h"
+
+static A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+static void ar6000_set_quality(struct iw_quality *iq, A_INT8 rssi);
+extern unsigned int wmitimeout;
+extern A_WAITQUEUE_HEAD arEvent;
+extern wait_queue_head_t ar6000_scan_queue;
+
+/*
+ * Encode a WPA or RSN information element as a custom
+ * element using the hostap format.
+ */
+static u_int
+encode_ie(void *buf, size_t bufsize,
+    const u_int8_t *ie, size_t ielen,
+    const char *leader, size_t leader_len)
+{
+    u_int8_t *p;
+    int i;
+
+    if (bufsize < leader_len)
+        return 0;
+    p = buf;
+    memcpy(p, leader, leader_len);
+    bufsize -= leader_len;
+    p += leader_len;
+    for (i = 0; i < ielen && bufsize > 2; i++)
+        p += sprintf(p, "%02x", ie[i]);
+    return (i == ielen ? p - (u_int8_t *)buf : 0);
+}
+
+void
+ar6000_scan_node(void *arg, bss_t *ni)
+{
+    struct iw_event iwe;
+#if WIRELESS_EXT > 14
+    char buf[64*2 + 30];
+#endif
+    struct ar_giwscan_param *param;
+    A_CHAR *current_ev;
+    A_CHAR *end_buf;
+    struct ieee80211_common_ie  *cie;
+	struct iw_request_info info;
+
+	info.cmd = 0;
+	info.flags = 0;
+
+    param = (struct ar_giwscan_param *)arg;
+
+    if (param->current_ev >= param->end_buf) {
+        return;
+    }
+    if ((param->firstPass == TRUE) &&
+        ((ni->ni_cie.ie_wpa == NULL) && (ni->ni_cie.ie_rsn == NULL))) {
+        /*
+         * Only forward wpa bss's in first pass
+         */
+        return;
+    }
+
+     if ((param->firstPass == FALSE) &&
+        ((ni->ni_cie.ie_wpa != NULL) || (ni->ni_cie.ie_rsn != NULL))) {
+        /*
+         * Only forward non-wpa bss's in 2nd pass
+         */
+        return;
+    }
+
+    current_ev = param->current_ev;
+    end_buf = param->end_buf;
+
+    cie = &ni->ni_cie;
+
+    A_MEMZERO(&iwe, sizeof(iwe));
+    iwe.cmd = SIOCGIWAP;
+    iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+    A_MEMCPY(iwe.u.ap_addr.sa_data, ni->ni_macaddr, 6);
+    current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
+                                      IW_EV_ADDR_LEN);
+
+    A_MEMZERO(&iwe, sizeof(iwe));
+    iwe.cmd = SIOCGIWESSID;
+    iwe.u.data.flags = 1;
+    iwe.u.data.length = cie->ie_ssid[1];
+    current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+                                      &cie->ie_ssid[2]);
+
+    if (cie->ie_capInfo & (IEEE80211_CAPINFO_ESS|IEEE80211_CAPINFO_IBSS)) {
+        A_MEMZERO(&iwe, sizeof(iwe));
+        iwe.cmd = SIOCGIWMODE;
+        iwe.u.mode = cie->ie_capInfo & IEEE80211_CAPINFO_ESS ?
+                IW_MODE_MASTER : IW_MODE_ADHOC;
+        current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
+                                          IW_EV_UINT_LEN);
+    }
+
+    A_MEMZERO(&iwe, sizeof(iwe));
+    iwe.cmd = SIOCGIWFREQ;
+    iwe.u.freq.m = cie->ie_chan * 100000;
+    iwe.u.freq.e = 1;
+    current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
+                                      IW_EV_FREQ_LEN);
+
+    A_MEMZERO(&iwe, sizeof(iwe));
+    iwe.cmd = IWEVQUAL;
+    ar6000_set_quality(&iwe.u.qual, ni->ni_snr);
+    current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
+                                      IW_EV_QUAL_LEN);
+
+    A_MEMZERO(&iwe, sizeof(iwe));
+    iwe.cmd = SIOCGIWENCODE;
+    if (cie->ie_capInfo & IEEE80211_CAPINFO_PRIVACY) {
+        iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+    } else {
+        iwe.u.data.flags = IW_ENCODE_DISABLED;
+    }
+    iwe.u.data.length = 0;
+    current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, "");
+
+    A_MEMZERO(&iwe, sizeof(iwe));
+    iwe.cmd = IWEVCUSTOM;
+    snprintf(buf, sizeof(buf), "bcn_int=%d", cie->ie_beaconInt);
+    iwe.u.data.length = strlen(buf);
+    current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, buf);
+
+    if (cie->ie_wpa != NULL) {
+        static const char wpa_leader[] = "wpa_ie=";
+
+        A_MEMZERO(&iwe, sizeof(iwe));
+        iwe.cmd = IWEVCUSTOM;
+        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_wpa,
+                                      cie->ie_wpa[1]+2,
+                                      wpa_leader, sizeof(wpa_leader)-1);
+
+        if (iwe.u.data.length != 0) {
+            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+									   buf);
+        }
+    }
+
+    if (cie->ie_rsn != NULL && cie->ie_rsn[0] == IEEE80211_ELEMID_RSN) {
+        static const char rsn_leader[] = "rsn_ie=";
+
+        A_MEMZERO(&iwe, sizeof(iwe));
+        iwe.cmd = IWEVCUSTOM;
+        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_rsn,
+                                      cie->ie_rsn[1]+2,
+                                      rsn_leader, sizeof(rsn_leader)-1);
+
+        if (iwe.u.data.length != 0) {
+            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+									   buf);
+        }
+    }
+
+    if (cie->ie_wmm != NULL) {
+        static const char wmm_leader[] = "wmm_ie=";
+
+        A_MEMZERO(&iwe, sizeof(iwe));
+        iwe.cmd = IWEVCUSTOM;
+        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_wmm,
+                                      cie->ie_wmm[1]+2,
+                                      wmm_leader, sizeof(wmm_leader)-1);
+        if (iwe.u.data.length != 0) {
+            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+									   buf);
+        }
+    }
+
+    if (cie->ie_ath != NULL) {
+        static const char ath_leader[] = "ath_ie=";
+
+        A_MEMZERO(&iwe, sizeof(iwe));
+        iwe.cmd = IWEVCUSTOM;
+        iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_ath,
+                                      cie->ie_ath[1]+2,
+                                      ath_leader, sizeof(ath_leader)-1);
+        if (iwe.u.data.length != 0) {
+            current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+									   buf);
+        }
+    }
+
+    param->current_ev = current_ev;
+}
+
+int
+ar6000_ioctl_giwscan(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_point *data, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    struct ar_giwscan_param param;
+    int i;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    param.current_ev = extra;
+    param.end_buf = extra + IW_SCAN_MAX_DATA;
+    param.firstPass = TRUE;
+
+    /*
+     * Do two passes to insure WPA scan candidates
+     * are sorted to the front.  This is a hack to deal with
+     * the wireless extensions capping scan results at
+     * IW_SCAN_MAX_DATA bytes.  In densely populated environments
+     * it's easy to overflow this buffer (especially with WPA/RSN
+     * information elements).  Note this sorting hack does not
+     * guarantee we won't overflow anyway.
+     */
+    for (i = 0; i < 2; i++) {
+        /*
+         * Translate data to WE format.
+         */
+        wmi_iterate_nodes(ar->arWmi, ar6000_scan_node, &param);
+        param.firstPass = FALSE;
+        if (param.current_ev >= param.end_buf) {
+            data->length = param.current_ev - extra;
+            return -E2BIG;
+        }
+    }
+
+    data->length = param.current_ev - extra;
+    return 0;
+}
+
+extern int reconnect_flag;
+/* SIOCSIWESSID */
+static int
+ar6000_ioctl_siwessid(struct net_device *dev,
+                     struct iw_request_info *info,
+                     struct iw_point *data, char *ssid)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    A_STATUS status;
+    A_UINT8     arNetworkType;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    /*
+     * iwconfig passes a string with length excluding any trailing NUL.
+     * FIXME: we should be able to set an ESSID of 32 bytes, yet things fall
+     * over badly if we do. So we limit the ESSID to 31 bytes.
+     */
+    if (data->flags && (!data->length || data->length >= sizeof(ar->arSsid))) {
+        /*
+         * ssid is invalid
+         */
+        return -EINVAL;
+    }
+    /* Added for bug 25178, return an IOCTL error instead of target returning
+       Illegal parameter error when either the BSSID or channel is missing
+       and we cannot scan during connect.
+     */
+    if (data->flags) {
+        if (ar->arSkipScan == TRUE &&
+            (ar->arChannelHint == 0 ||
+             (!ar->arReqBssid[0] && !ar->arReqBssid[1] && !ar->arReqBssid[2] &&
+              !ar->arReqBssid[3] && !ar->arReqBssid[4] && !ar->arReqBssid[5])))
+        {
+            return -EINVAL;
+        }
+    }
+
+    if (down_interruptible(&ar->arSem)) {
+        return -ERESTARTSYS;
+    }
+
+    if (ar->arTxPending[WMI_CONTROL_PRI]) {
+        /*
+         * sleep until the command queue drains
+         */
+        wait_event_interruptible_timeout(arEvent,
+            ar->arTxPending[WMI_CONTROL_PRI] == 0, wmitimeout * HZ);
+        if (signal_pending(current)) {
+            return -EINTR;
+        }
+    }
+
+    if (!data->flags) {
+        arNetworkType = ar->arNetworkType;
+        ar6000_init_profile_info(ar);
+        ar->arNetworkType = arNetworkType;
+    }
+
+    /*
+     * The original logic here prevented a disconnect if issuing an "essid off"
+     * if no ESSID was set, presumably to prevent sending multiple disconnects
+     * to the WMI.
+     *
+     * Unfortunately, this also meant that no disconnect was sent when we were
+     * already connected, but the profile has been changed since (which also
+     * clears the ESSID as a reminder that the WMI needs updating.)
+     *
+     * The "1 ||" makes sure we always disconnect or reconnect. The WMI doesn't
+     * seem to mind being sent multiple disconnects.
+     */
+    if (1 || (ar->arSsidLen) || (!data->flags))
+    {
+        if ((!data->flags) ||
+            (A_MEMCMP(ar->arSsid, ssid, ar->arSsidLen) != 0) ||
+            (ar->arSsidLen != (data->length)))
+        {
+            /*
+             * SSID set previously or essid off has been issued.
+             *
+             * Disconnect Command is issued in two cases after wmi is ready
+             * (1) ssid is different from the previous setting
+             * (2) essid off has been issued
+             *
+             */
+            if (ar->arWmiReady == TRUE) {
+                reconnect_flag = 0;
+                status = wmi_disconnect_cmd(ar->arWmi);
+                A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+                ar->arSsidLen = 0;
+                if (ar->arSkipScan == FALSE) {
+                    A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
+                }
+                if (!data->flags) {
+                    up(&ar->arSem);
+                    return 0;
+                }
+            } else {
+                 up(&ar->arSem);
+            }
+        }
+        else
+        {
+            /*
+             * SSID is same, so we assume profile hasn't changed.
+             * If the interface is up and wmi is ready, we issue
+             * a reconnect cmd. Issue a reconnect only we are already
+             * connected.
+             */
+            if((ar->arConnected == TRUE) && (ar->arWmiReady == TRUE))
+            {
+                reconnect_flag = TRUE;
+                status = wmi_reconnect_cmd(ar->arWmi,ar->arReqBssid,
+                                           ar->arChannelHint);
+                up(&ar->arSem);
+                if (status != A_OK) {
+                    return -EIO;
+                }
+                return 0;
+            }
+            else{
+                /*
+                 * Dont return if connect is pending.
+                 */
+                if(!(ar->arConnectPending)) {
+                    up(&ar->arSem);
+                    return 0;
+                }
+            }
+        }
+    }
+
+    ar->arSsidLen = data->length;
+    A_MEMCPY(ar->arSsid, ssid, ar->arSsidLen);
+
+    /* The ssid length check prevents second "essid off" from the user,
+       to be treated as a connect cmd. The second "essid off" is ignored.
+    */
+    if((ar->arWmiReady == TRUE) && (ar->arSsidLen > 0) )
+    {
+        AR6000_SPIN_LOCK(&ar->arLock, 0);
+        if (SHARED_AUTH == ar->arDot11AuthMode) {
+            ar6000_install_static_wep_keys(ar);
+        }
+        AR_DEBUG_PRINTF("Connect called with authmode %d dot11 auth %d"\
+                        " PW crypto %d PW crypto Len %d GRP crypto %d"\
+                        " GRP crypto Len %d\n",
+                        ar->arAuthMode, ar->arDot11AuthMode,
+                        ar->arPairwiseCrypto, ar->arPairwiseCryptoLen,
+                        ar->arGroupCrypto, ar->arGroupCryptoLen);
+        reconnect_flag = 0;
+        AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+        status = wmi_connect_cmd(ar->arWmi, ar->arNetworkType,
+                                 ar->arDot11AuthMode, ar->arAuthMode,
+                                 ar->arPairwiseCrypto, ar->arPairwiseCryptoLen,
+                                 ar->arGroupCrypto,ar->arGroupCryptoLen,
+                                 ar->arSsidLen, ar->arSsid,
+                                 ar->arReqBssid, ar->arChannelHint,
+                                 ar->arConnectCtrlFlags);
+
+
+        up(&ar->arSem);
+
+        if (status != A_OK) {
+            return -EIO;
+        }
+        ar->arConnectPending = TRUE;
+    }else{
+      up(&ar->arSem);
+    }
+    return 0;
+}
+
+/* SIOCGIWESSID */
+static int
+ar6000_ioctl_giwessid(struct net_device *dev,
+                     struct iw_request_info *info,
+                     struct iw_point *data, char *essid)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    data->flags = 1;
+    data->length = ar->arSsidLen;
+    A_MEMCPY(essid, ar->arSsid, ar->arSsidLen);
+
+    return 0;
+}
+
+
+void ar6000_install_static_wep_keys(AR_SOFTC_T *ar)
+{
+    A_UINT8 index;
+    A_UINT8 keyUsage;
+
+    for (index = WMI_MIN_KEY_INDEX; index <= WMI_MAX_KEY_INDEX; index++) {
+        if (ar->arWepKeyList[index].arKeyLen) {
+            keyUsage = GROUP_USAGE;
+            if (index == ar->arDefTxKeyIndex) {
+                keyUsage |= TX_USAGE;
+            }
+            wmi_addKey_cmd(ar->arWmi,
+                           index,
+                           WEP_CRYPT,
+                           keyUsage,
+                           ar->arWepKeyList[index].arKeyLen,
+                           NULL,
+                           ar->arWepKeyList[index].arKey, KEY_OP_INIT_VAL,
+                           NO_SYNC_WMIFLAG);
+        }
+    }
+}
+
+int
+ar6000_ioctl_delkey(struct net_device *dev, struct iw_request_info *info,
+             void *w, char *extra)
+{
+    return 0;
+}
+
+int
+ar6000_ioctl_setmlme(struct net_device *dev, struct iw_request_info *info,
+             void *w, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    struct ieee80211req_mlme *mlme = (struct ieee80211req_mlme *)extra;
+
+    if ((ar->arWmiReady == FALSE) || (ar->arConnected != TRUE))
+		return -EIO;
+
+    switch (mlme->im_op) {
+        case IEEE80211_MLME_DISASSOC:
+        case IEEE80211_MLME_DEAUTH:
+            /* Not Supported */
+            break;
+        default:
+            break;
+    }
+    return 0;
+}
+
+
+int
+ar6000_ioctl_setwmmparams(struct net_device *dev, struct iw_request_info *info,
+             void *w, char *extra)
+{
+    return -EIO;            /* for now */
+}
+
+int
+ar6000_ioctl_getwmmparams(struct net_device *dev, struct iw_request_info *info,
+             void *w, char *extra)
+{
+    return -EIO;            /* for now */
+}
+
+int ar6000_ioctl_setoptie(struct net_device *dev, struct iw_request_info *info,
+			  struct iw_point *data, char *extra)
+{
+	/* The target generates the WPA/RSN IE */
+	return 0;
+}
+
+int
+ar6000_ioctl_setauthalg(struct net_device *dev, struct iw_request_info *info,
+             void *w, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    struct ieee80211req_authalg *req = (struct ieee80211req_authalg *)extra;
+    int ret = 0;
+
+
+    AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+    if (req->auth_alg == AUTH_ALG_OPEN_SYSTEM) {
+        ar->arDot11AuthMode  = OPEN_AUTH;
+    } else if (req->auth_alg == AUTH_ALG_LEAP) {
+        ar->arDot11AuthMode   = LEAP_AUTH;
+        ar->arPairwiseCrypto  = WEP_CRYPT;
+        ar->arGroupCrypto     = WEP_CRYPT;
+    } else {
+        ret = -EIO;
+    }
+
+    AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+    return ret;
+}
+static int
+ar6000_ioctl_addpmkid(struct net_device *dev, struct iw_request_info *info,
+             void *w, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    struct ieee80211req_addpmkid  *req = (struct ieee80211req_addpmkid *)extra;
+    A_STATUS status;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    AR_DEBUG_PRINTF("Add pmkid for %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x en=%d\n",
+                    req->pi_bssid[0], req->pi_bssid[1], req->pi_bssid[2],
+                    req->pi_bssid[3], req->pi_bssid[4], req->pi_bssid[5],
+                    req->pi_enable);
+
+    status = wmi_setPmkid_cmd(ar->arWmi, req->pi_bssid, req->pi_pmkid,
+                              req->pi_enable);
+
+    if (status != A_OK) {
+        return -EIO;
+    }
+
+    return 0;
+}
+
+/*
+ * SIOCSIWRATE
+ */
+int
+ar6000_ioctl_siwrate(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_param *rrq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    A_UINT32  kbps;
+
+    if (rrq->fixed) {
+        kbps = rrq->value / 1000;           /* rrq->value is in bps */
+    } else {
+        kbps = -1;                          /* -1 indicates auto rate */
+    }
+    if(kbps != -1 && wmi_validate_bitrate(ar->arWmi, kbps) == A_EINVAL)
+    {
+        AR_DEBUG_PRINTF("BitRate is not Valid %d\n", kbps);
+        return -EINVAL;
+    }
+    ar->arBitRate = kbps;
+    if(ar->arWmiReady == TRUE)
+    {
+        if (wmi_set_bitrate_cmd(ar->arWmi, kbps) != A_OK) {
+            return -EINVAL;
+        }
+    }
+    return 0;
+}
+
+/*
+ * SIOCGIWRATE
+ */
+int
+ar6000_ioctl_giwrate(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_param *rrq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    int ret = 0;
+
+    if (down_interruptible(&ar->arSem)) {
+        return -ERESTARTSYS;
+    }
+    if(ar->arWmiReady == TRUE)
+    {
+        ar->arBitRate = 0xFFFF;
+        if (wmi_get_bitrate_cmd(ar->arWmi) != A_OK) {
+            up(&ar->arSem);
+            return -EIO;
+        }
+        wait_event_interruptible_timeout(arEvent, ar->arBitRate != 0xFFFF, wmitimeout * HZ);
+        if (signal_pending(current)) {
+            ret = -EINTR;
+        }
+    }
+    /* If the interface is down or wmi is not ready or the target is not
+       connected - return the value stored in the device structure */
+    if (!ret) {
+        if (ar->arBitRate == -1) {
+            rrq->fixed = TRUE;
+            rrq->value = 0;
+        } else {
+            rrq->value = ar->arBitRate * 1000;
+        }
+    }
+
+    up(&ar->arSem);
+
+    return ret;
+}
+
+/*
+ * SIOCSIWTXPOW
+ */
+static int
+ar6000_ioctl_siwtxpow(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_param *rrq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    A_UINT8 dbM;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ar->arRadioSwitch == WLAN_ENABLED
+	&& rrq->disabled) {
+	    if (wmi_switch_radio(ar->arWmi, WLAN_DISABLED) < 0)
+		    return -EIO;
+	    ar->arRadioSwitch = WLAN_DISABLED;
+    } else if (ar->arRadioSwitch == WLAN_DISABLED
+	       && !rrq->disabled) {
+	    if (wmi_switch_radio(ar->arWmi, WLAN_ENABLED) < 0)
+		    return -EIO;
+	    ar->arRadioSwitch = WLAN_ENABLED;
+    }
+
+    if (rrq->fixed) {
+        if (rrq->flags != IW_TXPOW_DBM) {
+            return -EOPNOTSUPP;
+        }
+        ar->arTxPwr= dbM = rrq->value;
+        ar->arTxPwrSet = TRUE;
+    } else {
+        ar->arTxPwr = dbM = 0;
+        ar->arTxPwrSet = FALSE;
+    }
+    if(ar->arWmiReady == TRUE)
+    {
+        AR_DEBUG_PRINTF("Set tx pwr cmd %d dbM\n", dbM);
+        wmi_set_txPwr_cmd(ar->arWmi, dbM);
+    }
+    return 0;
+}
+
+/*
+ * SIOCGIWTXPOW
+ */
+int
+ar6000_ioctl_giwtxpow(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_param *rrq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    int ret = 0;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ar->arRadioSwitch == WLAN_DISABLED) {
+	    rrq->disabled = 1;
+	    return 0;
+    }
+
+    if (down_interruptible(&ar->arSem)) {
+        return -ERESTARTSYS;
+    }
+    if((ar->arWmiReady == TRUE) && (ar->arConnected == TRUE))
+    {
+        ar->arTxPwr = 0;
+
+        if (wmi_get_txPwr_cmd(ar->arWmi) != A_OK) {
+            up(&ar->arSem);
+            return -EIO;
+        }
+
+        wait_event_interruptible_timeout(arEvent, ar->arTxPwr != 0, wmitimeout * HZ);
+
+        if (signal_pending(current)) {
+            ret = -EINTR;
+         }
+    }
+   /* If the interace is down or wmi is not ready or target is not connected
+      then return value stored in the device structure */
+
+    if (!ret) {
+         if (ar->arTxPwrSet == TRUE) {
+            rrq->fixed = TRUE;
+        }
+        rrq->value = ar->arTxPwr;
+        rrq->flags = IW_TXPOW_DBM;
+    }
+
+    up(&ar->arSem);
+
+    return ret;
+}
+
+/*
+ * SIOCSIWRETRY
+ * since iwconfig only provides us with one max retry value, we use it
+ * to apply to data frames of the BE traffic class.
+ */
+static int
+ar6000_ioctl_siwretry(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_param *rrq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (rrq->disabled) {
+        return -EOPNOTSUPP;
+    }
+
+    if ((rrq->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT) {
+        return -EOPNOTSUPP;
+    }
+
+    if ( !(rrq->value >= WMI_MIN_RETRIES) || !(rrq->value <= WMI_MAX_RETRIES)) {
+            return - EINVAL;
+    }
+    if(ar->arWmiReady == TRUE)
+    {
+        if (wmi_set_retry_limits_cmd(ar->arWmi, DATA_FRAMETYPE, WMM_AC_BE,
+                                     rrq->value, 0) != A_OK){
+            return -EINVAL;
+        }
+    }
+    ar->arMaxRetries = rrq->value;
+    return 0;
+}
+
+/*
+ * SIOCGIWRETRY
+ */
+static int
+ar6000_ioctl_giwretry(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_param *rrq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    rrq->disabled = 0;
+    switch (rrq->flags & IW_RETRY_TYPE) {
+    case IW_RETRY_LIFETIME:
+        return -EOPNOTSUPP;
+        break;
+    case IW_RETRY_LIMIT:
+        rrq->flags = IW_RETRY_LIMIT;
+        switch (rrq->flags & IW_RETRY_MODIFIER) {
+        case IW_RETRY_MIN:
+            rrq->flags |= IW_RETRY_MIN;
+            rrq->value = WMI_MIN_RETRIES;
+            break;
+        case IW_RETRY_MAX:
+            rrq->flags |= IW_RETRY_MAX;
+            rrq->value = ar->arMaxRetries;
+            break;
+        }
+        break;
+    }
+    return 0;
+}
+
+/*
+ * SIOCSIWENCODE
+ */
+static int
+ar6000_ioctl_siwencode(struct net_device *dev,
+              struct iw_request_info *info,
+              struct iw_point *erq, char *keybuf)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    int index;
+    A_INT32 auth = ar->arDot11AuthMode;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    index = erq->flags & IW_ENCODE_INDEX;
+
+    if (index && (((index - 1) < WMI_MIN_KEY_INDEX) ||
+                  ((index - 1) > WMI_MAX_KEY_INDEX)))
+    {
+        return -EIO;
+    }
+
+    if (erq->flags & IW_ENCODE_DISABLED) {
+        /*
+         * Encryption disabled
+         */
+        if (index) {
+            /*
+             * If key index was specified then clear the specified key
+             */
+            index--;
+            A_MEMZERO(ar->arWepKeyList[index].arKey,
+                      sizeof(ar->arWepKeyList[index].arKey));
+            ar->arWepKeyList[index].arKeyLen = 0;
+        }
+        ar->arDot11AuthMode       = OPEN_AUTH;
+        ar->arPairwiseCrypto      = NONE_CRYPT;
+        ar->arGroupCrypto         = NONE_CRYPT;
+        ar->arAuthMode            = NONE_AUTH;
+    } else {
+        /*
+         * Enabling WEP encryption
+         */
+        if (index) {
+            index--;                /* keyindex is off base 1 in iwconfig */
+        }
+
+        if (erq->flags & IW_ENCODE_OPEN) {
+            auth = OPEN_AUTH;
+        } else if (erq->flags & IW_ENCODE_RESTRICTED) {
+            auth = SHARED_AUTH;
+        }
+
+        if (erq->length) {
+            if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(erq->length)) {
+                return -EIO;
+            }
+
+            A_MEMZERO(ar->arWepKeyList[index].arKey,
+                      sizeof(ar->arWepKeyList[index].arKey));
+            A_MEMCPY(ar->arWepKeyList[index].arKey, keybuf, erq->length);
+            ar->arWepKeyList[index].arKeyLen = erq->length;
+        } else {
+            if (ar->arWepKeyList[index].arKeyLen == 0) {
+                return -EIO;
+            }
+            ar->arDefTxKeyIndex = index;
+        }
+
+        ar->arPairwiseCrypto      = WEP_CRYPT;
+        ar->arGroupCrypto         = WEP_CRYPT;
+        ar->arDot11AuthMode       = auth;
+        ar->arAuthMode            = NONE_AUTH;
+    }
+
+    /*
+     * profile has changed.  Erase ssid to signal change
+     */
+    A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+    ar->arSsidLen = 0;
+
+    return 0;
+}
+
+static int
+ar6000_ioctl_giwencode(struct net_device *dev,
+              struct iw_request_info *info,
+              struct iw_point *erq, char *key)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    A_UINT8 keyIndex;
+    struct ar_wep_key *wk;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ar->arPairwiseCrypto == NONE_CRYPT) {
+        erq->length = 0;
+        erq->flags = IW_ENCODE_DISABLED;
+    } else {
+        /* get the keyIndex */
+        keyIndex = erq->flags & IW_ENCODE_INDEX;
+        if (0 == keyIndex) {
+            keyIndex = ar->arDefTxKeyIndex;
+        } else if ((keyIndex - 1 < WMI_MIN_KEY_INDEX) ||
+                   (keyIndex - 1 > WMI_MAX_KEY_INDEX))
+        {
+            keyIndex = WMI_MIN_KEY_INDEX;
+        } else {
+            keyIndex--;
+        }
+        erq->flags = keyIndex + 1;
+        erq->flags |= IW_ENCODE_ENABLED;
+        wk = &ar->arWepKeyList[keyIndex];
+        if (erq->length > wk->arKeyLen) {
+            erq->length = wk->arKeyLen;
+        }
+        if (wk->arKeyLen) {
+            A_MEMCPY(key, wk->arKey, erq->length);
+        }
+        if (ar->arDot11AuthMode == OPEN_AUTH) {
+            erq->flags |= IW_ENCODE_OPEN;
+        } else if (ar->arDot11AuthMode == SHARED_AUTH) {
+            erq->flags |= IW_ENCODE_RESTRICTED;
+        }
+    }
+
+    return 0;
+}
+
+static int ar6000_ioctl_siwpower(struct net_device *dev,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *extra)
+{
+	AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+	WMI_POWER_MODE power_mode;
+
+	if (wrqu->power.disabled)
+		power_mode = MAX_PERF_POWER;
+	else
+		power_mode = REC_POWER;
+
+	if (wmi_powermode_cmd(ar->arWmi, power_mode) < 0)
+		return -EIO;
+
+	return 0;
+}
+
+static int ar6000_ioctl_giwpower(struct net_device *dev,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *extra)
+{
+	AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+	/*
+	 * FIXME:
+	 * https://docs.openmoko.org/trac/ticket/2267
+	 * When starting wpa_supplicant the kernel oopses.
+	 * The following condition avoids the oops.
+	 * Remove this comment to bless this solution.
+	 */
+	if (ar->arWlanState == WLAN_DISABLED || ar->arWmiReady == FALSE)
+		return -EIO;
+
+	return wmi_get_power_mode_cmd(ar->arWmi);
+}
+
+static int ar6000_ioctl_siwgenie(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_point *dwrq,
+				 char *extra)
+{
+	/* The target does that for us */
+	return 0;
+}
+
+static int ar6000_ioctl_giwgenie(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_point *dwrq,
+				 char *extra)
+{
+	return 0;
+}
+
+static int ar6000_ioctl_siwauth(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_param *param,
+				char *extra)
+{
+	AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+	int reset = 0;
+
+	switch (param->flags & IW_AUTH_INDEX) {
+	case IW_AUTH_WPA_VERSION:
+		if (param->value & IW_AUTH_WPA_VERSION_DISABLED) {
+			ar->arAuthMode = NONE_AUTH;
+		}
+		if (param->value & IW_AUTH_WPA_VERSION_WPA) {
+			ar->arAuthMode = WPA_AUTH;
+		}
+		if (param->value & IW_AUTH_WPA_VERSION_WPA2) {
+			ar->arAuthMode = WPA2_AUTH;
+		}
+
+		reset = 1;
+		break;
+	case IW_AUTH_CIPHER_PAIRWISE:
+		if (param->value & IW_AUTH_CIPHER_NONE) {
+			ar->arPairwiseCrypto = NONE_CRYPT;
+		}
+		if (param->value & IW_AUTH_CIPHER_WEP40) {
+			ar->arPairwiseCrypto = WEP_CRYPT;
+		}
+		if (param->value & IW_AUTH_CIPHER_TKIP) {
+			ar->arPairwiseCrypto = TKIP_CRYPT;
+		}
+		if (param->value & IW_AUTH_CIPHER_CCMP) {
+			ar->arPairwiseCrypto = AES_CRYPT;
+		}
+
+		reset = 1;
+		break;
+	case IW_AUTH_CIPHER_GROUP:
+		if (param->value & IW_AUTH_CIPHER_NONE) {
+			ar->arGroupCrypto = NONE_CRYPT;
+		}
+		if (param->value & IW_AUTH_CIPHER_WEP40) {
+			ar->arGroupCrypto = WEP_CRYPT;
+		}
+		if (param->value & IW_AUTH_CIPHER_TKIP) {
+			ar->arGroupCrypto = TKIP_CRYPT;
+		}
+		if (param->value & IW_AUTH_CIPHER_CCMP) {
+			ar->arGroupCrypto = AES_CRYPT;
+		}
+
+		reset = 1;
+		break;
+	case IW_AUTH_KEY_MGMT:
+		if (param->value & IW_AUTH_KEY_MGMT_PSK) {
+			if (ar->arAuthMode == WPA_AUTH) {
+				ar->arAuthMode = WPA_PSK_AUTH;
+			} else if (ar->arAuthMode == WPA2_AUTH) {
+				ar->arAuthMode = WPA2_PSK_AUTH;
+			}
+
+			reset = 1;
+		}
+		break;
+
+	case IW_AUTH_TKIP_COUNTERMEASURES:
+		if (ar->arWmiReady == FALSE) {
+			return -EIO;
+		}
+		wmi_set_tkip_countermeasures_cmd(ar->arWmi, param->value);
+		break;
+
+	case IW_AUTH_DROP_UNENCRYPTED:
+		break;
+
+	case IW_AUTH_80211_AUTH_ALG:
+		if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
+			ar->arDot11AuthMode  = OPEN_AUTH;
+		}
+		if (param->value & IW_AUTH_ALG_SHARED_KEY) {
+			ar->arDot11AuthMode  = SHARED_AUTH;
+		}
+		if (param->value & IW_AUTH_ALG_LEAP) {
+			ar->arDot11AuthMode   = LEAP_AUTH;
+			ar->arPairwiseCrypto  = WEP_CRYPT;
+			ar->arGroupCrypto     = WEP_CRYPT;
+		}
+
+		reset = 1;
+		break;
+
+	case IW_AUTH_WPA_ENABLED:
+		reset = 1;
+		break;
+
+	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+		break;
+
+	case IW_AUTH_PRIVACY_INVOKED:
+		break;
+
+	default:
+		printk("%s(): Unknown flag 0x%x\n", __FUNCTION__, param->flags);
+		return -EOPNOTSUPP;
+	}
+
+	if (reset) {
+		A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+		ar->arSsidLen = 0;
+	}
+
+	return 0;
+}
+
+static int ar6000_ioctl_giwauth(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_param *dwrq,
+				char *extra)
+{
+	return 0;
+}
+
+static int ar6000_ioctl_siwencodeext(struct net_device *dev,
+				     struct iw_request_info *info,
+				     union iwreq_data *wrqu,
+				     char *extra)
+{
+	AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+	struct iw_point *encoding = &wrqu->encoding;
+	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+	int alg = ext->alg, idx;
+
+	if (ar->arWlanState == WLAN_DISABLED) {
+		return -EIO;
+	}
+
+	/* Determine and validate the key index */
+	idx = (encoding->flags & IW_ENCODE_INDEX) - 1;
+	if (idx) {
+		if (idx < 0 || idx > 3)
+			return -EINVAL;
+	}
+
+	if ((alg == IW_ENCODE_ALG_TKIP) || (alg == IW_ENCODE_ALG_CCMP)) {
+		struct ieee80211req_key ik;
+		KEY_USAGE key_usage;
+		CRYPTO_TYPE key_type = NONE_CRYPT;
+		int status;
+
+		ar->user_saved_keys.keyOk = FALSE;
+
+		if (alg == IW_ENCODE_ALG_TKIP) {
+			key_type = TKIP_CRYPT;
+			ik.ik_type = IEEE80211_CIPHER_TKIP;
+		} else {
+			key_type = AES_CRYPT;
+			ik.ik_type = IEEE80211_CIPHER_AES_CCM;
+		}
+
+		ik.ik_keyix = idx;
+		ik.ik_keylen = ext->key_len;
+		ik.ik_flags = IEEE80211_KEY_RECV;
+		if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+			ik.ik_flags |= IEEE80211_KEY_XMIT
+				| IEEE80211_KEY_DEFAULT;
+		}
+
+		if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
+			memcpy(&ik.ik_keyrsc, ext->rx_seq, 8);
+		}
+
+		memcpy(ik.ik_keydata, ext->key, ext->key_len);
+
+		ar->user_saved_keys.keyType = key_type;
+		if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
+			key_usage = GROUP_USAGE;
+			memset(ik.ik_macaddr, 0, ETH_ALEN);
+			memcpy(&ar->user_saved_keys.bcast_ik, &ik,
+			       sizeof(struct ieee80211req_key));
+		} else {
+			key_usage = PAIRWISE_USAGE;
+			memcpy(ik.ik_macaddr, ext->addr.sa_data, ETH_ALEN);
+			memcpy(&ar->user_saved_keys.ucast_ik, &ik,
+			       sizeof(struct ieee80211req_key));
+		}
+
+		status = wmi_addKey_cmd(ar->arWmi, ik.ik_keyix, key_type,
+					key_usage, ik.ik_keylen,
+					(A_UINT8 *)&ik.ik_keyrsc,
+					ik.ik_keydata,
+					KEY_OP_INIT_VAL, SYNC_BEFORE_WMIFLAG);
+
+		if (status < 0)
+			return -EIO;
+
+		ar->user_saved_keys.keyOk = TRUE;
+
+		return 0;
+
+	} else {
+		/* WEP falls back to SIWENCODE */
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+
+static int ar6000_ioctl_giwencodeext(struct net_device *dev,
+				     struct iw_request_info *info,
+				     struct iw_point *dwrq,
+				     char *extra)
+{
+	return 0;
+}
+
+
+static int
+ar6000_ioctl_setparam(struct net_device *dev,
+                      struct iw_request_info *info,
+                      void *erq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    int *i = (int *)extra;
+    int param = i[0];
+    int value = i[1];
+    int ret = 0;
+    A_BOOL profChanged = FALSE;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    switch (param) {
+        case IEEE80211_PARAM_WPA:
+            switch (value) {
+                case WPA_MODE_WPA1:
+                    ar->arAuthMode = WPA_AUTH;
+                    profChanged    = TRUE;
+                    break;
+                case WPA_MODE_WPA2:
+                    ar->arAuthMode = WPA2_AUTH;
+                    profChanged    = TRUE;
+                    break;
+                case WPA_MODE_NONE:
+                    ar->arAuthMode = NONE_AUTH;
+                    profChanged    = TRUE;
+                    break;
+	    default:
+		    printk("IEEE80211_PARAM_WPA: Unknown value %d\n", value);
+            }
+            break;
+        case IEEE80211_PARAM_AUTHMODE:
+            switch(value) {
+                case IEEE80211_AUTH_WPA_PSK:
+                    if (WPA_AUTH == ar->arAuthMode) {
+                        ar->arAuthMode = WPA_PSK_AUTH;
+                        profChanged    = TRUE;
+                    } else if (WPA2_AUTH == ar->arAuthMode) {
+                        ar->arAuthMode = WPA2_PSK_AUTH;
+                        profChanged    = TRUE;
+                    } else {
+                        AR_DEBUG_PRINTF("Error -  Setting PSK mode when WPA "\
+                                        "param was set to %d\n",
+                                        ar->arAuthMode);
+                        ret = -1;
+                    }
+                    break;
+                case IEEE80211_AUTH_WPA_CCKM:
+                    if (WPA2_AUTH == ar->arAuthMode) {
+                        ar->arAuthMode = WPA2_AUTH_CCKM;
+                    } else {
+                        ar->arAuthMode = WPA_AUTH_CCKM;
+                    }
+                    break;
+                default:
+                    break;
+            }
+            break;
+        case IEEE80211_PARAM_UCASTCIPHER:
+            switch (value) {
+                case IEEE80211_CIPHER_AES_CCM:
+                    ar->arPairwiseCrypto = AES_CRYPT;
+                    profChanged          = TRUE;
+                    break;
+                case IEEE80211_CIPHER_TKIP:
+                    ar->arPairwiseCrypto = TKIP_CRYPT;
+                    profChanged          = TRUE;
+                    break;
+                case IEEE80211_CIPHER_WEP:
+                    ar->arPairwiseCrypto = WEP_CRYPT;
+                    profChanged          = TRUE;
+                    break;
+                case IEEE80211_CIPHER_NONE:
+                    ar->arPairwiseCrypto = NONE_CRYPT;
+                    profChanged          = TRUE;
+                    break;
+            }
+            break;
+        case IEEE80211_PARAM_UCASTKEYLEN:
+            if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(value)) {
+                ret = -EIO;
+            } else {
+                ar->arPairwiseCryptoLen = value;
+            }
+            break;
+        case IEEE80211_PARAM_MCASTCIPHER:
+            switch (value) {
+                case IEEE80211_CIPHER_AES_CCM:
+                    ar->arGroupCrypto = AES_CRYPT;
+                    profChanged       = TRUE;
+                    break;
+                case IEEE80211_CIPHER_TKIP:
+                    ar->arGroupCrypto = TKIP_CRYPT;
+                    profChanged       = TRUE;
+                    break;
+                case IEEE80211_CIPHER_WEP:
+                    ar->arGroupCrypto = WEP_CRYPT;
+                    profChanged       = TRUE;
+                    break;
+                case IEEE80211_CIPHER_NONE:
+                    ar->arGroupCrypto = NONE_CRYPT;
+                    profChanged       = TRUE;
+                    break;
+            }
+            break;
+        case IEEE80211_PARAM_MCASTKEYLEN:
+            if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(value)) {
+                ret = -EIO;
+            } else {
+                ar->arGroupCryptoLen = value;
+            }
+            break;
+        case IEEE80211_PARAM_COUNTERMEASURES:
+            if (ar->arWmiReady == FALSE) {
+                return -EIO;
+            }
+            wmi_set_tkip_countermeasures_cmd(ar->arWmi, value);
+            break;
+        default:
+            break;
+    }
+
+    if (profChanged == TRUE) {
+        /*
+         * profile has changed.  Erase ssid to signal change
+         */
+	A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+	ar->arSsidLen = 0;
+    }
+
+    return ret;
+}
+
+int
+ar6000_ioctl_getparam(struct net_device *dev, struct iw_request_info *info,
+            void *w, char *extra)
+{
+    return -EIO;            /* for now */
+}
+
+int
+ar6000_ioctl_setkey(struct net_device *dev, struct iw_request_info *info,
+		    void *w, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    struct ieee80211req_key *ik = (struct ieee80211req_key *)extra;
+    KEY_USAGE keyUsage;
+    A_STATUS status;
+    CRYPTO_TYPE keyType = NONE_CRYPT;
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    ar->user_saved_keys.keyOk = FALSE;
+
+    if ( 0 == memcmp(ik->ik_macaddr, "\x00\x00\x00\x00\x00\x00",
+                     IEEE80211_ADDR_LEN)) {
+        keyUsage = GROUP_USAGE;
+        A_MEMCPY(&ar->user_saved_keys.bcast_ik, ik,
+                 sizeof(struct ieee80211req_key));
+    } else {
+        keyUsage = PAIRWISE_USAGE;
+        A_MEMCPY(&ar->user_saved_keys.ucast_ik, ik,
+                 sizeof(struct ieee80211req_key));
+    }
+
+    switch (ik->ik_type) {
+        case IEEE80211_CIPHER_WEP:
+            keyType = WEP_CRYPT;
+            break;
+        case IEEE80211_CIPHER_TKIP:
+            keyType = TKIP_CRYPT;
+            break;
+        case IEEE80211_CIPHER_AES_CCM:
+            keyType = AES_CRYPT;
+            break;
+        default:
+            break;
+    }
+    ar->user_saved_keys.keyType = keyType;
+
+    if (IEEE80211_CIPHER_CCKM_KRK != ik->ik_type) {
+        if (NONE_CRYPT == keyType) {
+            return -EIO;
+        }
+
+        status = wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, keyType, keyUsage,
+                                ik->ik_keylen, (A_UINT8 *)&ik->ik_keyrsc,
+                                ik->ik_keydata, KEY_OP_INIT_VAL,
+                                SYNC_BEFORE_WMIFLAG);
+
+        if (status != A_OK) {
+            return -EIO;
+        }
+    } else {
+        status = wmi_add_krk_cmd(ar->arWmi, ik->ik_keydata);
+    }
+
+    ar->user_saved_keys.keyOk = TRUE;
+
+    return 0;
+}
+
+
+/*
+ * SIOCGIWNAME
+ */
+int
+ar6000_ioctl_giwname(struct net_device *dev,
+           struct iw_request_info *info,
+           char *name, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    switch (ar->arPhyCapability) {
+    case (WMI_11A_CAPABILITY):
+        strncpy(name, "AR6000 802.11a", IFNAMSIZ);
+        break;
+    case (WMI_11G_CAPABILITY):
+        strncpy(name, "AR6000 802.11g", IFNAMSIZ);
+        break;
+    case (WMI_11AG_CAPABILITY):
+        strncpy(name, "AR6000 802.11ag", IFNAMSIZ);
+        break;
+    default:
+        strncpy(name, "AR6000 802.11", IFNAMSIZ);
+        break;
+    }
+
+    return 0;
+}
+
+/*
+ * SIOCSIWFREQ
+ */
+int
+ar6000_ioctl_siwfreq(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_freq *freq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    /*
+     * We support limiting the channels via wmiconfig.
+     *
+     * We use this command to configure the channel hint for the connect cmd
+     * so it is possible the target will end up connecting to a different
+     * channel.
+     */
+    if (freq->e > 1) {
+        return -EINVAL;
+    } else if (freq->e == 1) {
+        ar->arChannelHint = freq->m / 100000;
+    } else {
+        ar->arChannelHint = wlan_ieee2freq(freq->m);
+    }
+
+    A_PRINTF("channel hint set to %d\n", ar->arChannelHint);
+    return 0;
+}
+
+/*
+ * SIOCGIWFREQ
+ */
+int
+ar6000_ioctl_giwfreq(struct net_device *dev,
+                struct iw_request_info *info,
+                struct iw_freq *freq, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ar->arConnected != TRUE) {
+        return -EINVAL;
+    }
+
+    freq->m = ar->arBssChannel * 100000;
+    freq->e = 1;
+
+    return 0;
+}
+
+/*
+ * SIOCSIWMODE
+ */
+int
+ar6000_ioctl_siwmode(struct net_device *dev,
+            struct iw_request_info *info,
+            __u32 *mode, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    switch (*mode) {
+    case IW_MODE_INFRA:
+        ar->arNetworkType = INFRA_NETWORK;
+        break;
+    case IW_MODE_ADHOC:
+        ar->arNetworkType = ADHOC_NETWORK;
+        break;
+    default:
+        return -EINVAL;
+    }
+
+    return 0;
+}
+
+/*
+ * SIOCGIWMODE
+ */
+int
+ar6000_ioctl_giwmode(struct net_device *dev,
+            struct iw_request_info *info,
+            __u32 *mode, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    switch (ar->arNetworkType) {
+    case INFRA_NETWORK:
+        *mode = IW_MODE_INFRA;
+        break;
+    case ADHOC_NETWORK:
+        *mode = IW_MODE_ADHOC;
+        break;
+    default:
+        return -EIO;
+    }
+    return 0;
+}
+
+/*
+ * SIOCSIWSENS
+ */
+int
+ar6000_ioctl_siwsens(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_param *sens, char *extra)
+{
+    return 0;
+}
+
+/*
+ * SIOCGIWSENS
+ */
+int
+ar6000_ioctl_giwsens(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_param *sens, char *extra)
+{
+    sens->value = 0;
+    sens->fixed = 1;
+
+    return 0;
+}
+
+/*
+ * SIOCGIWRANGE
+ */
+int
+ar6000_ioctl_giwrange(struct net_device *dev,
+             struct iw_request_info *info,
+             struct iw_point *data, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    struct iw_range *range = (struct iw_range *) extra;
+    int i, ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (down_interruptible(&ar->arSem)) {
+        return -ERESTARTSYS;
+    }
+    ar->arNumChannels = -1;
+    A_MEMZERO(ar->arChannelList, sizeof (ar->arChannelList));
+
+    if (wmi_get_channelList_cmd(ar->arWmi) != A_OK) {
+        up(&ar->arSem);
+        return -EIO;
+    }
+
+    wait_event_interruptible_timeout(arEvent, ar->arNumChannels != -1, wmitimeout * HZ);
+
+    if (signal_pending(current)) {
+        up(&ar->arSem);
+        return -EINTR;
+    }
+
+    data->length = sizeof(struct iw_range);
+    A_MEMZERO(range, sizeof(struct iw_range));
+
+    range->txpower_capa = IW_TXPOW_DBM;
+
+    range->min_pmp = 1 * 1024;
+    range->max_pmp = 65535 * 1024;
+    range->min_pmt = 1 * 1024;
+    range->max_pmt = 1000 * 1024;
+    range->pmp_flags = IW_POWER_PERIOD;
+    range->pmt_flags = IW_POWER_TIMEOUT;
+    range->pm_capa = 0;
+
+    range->we_version_compiled = WIRELESS_EXT;
+    range->we_version_source = 13;
+
+    range->retry_capa = IW_RETRY_LIMIT;
+    range->retry_flags = IW_RETRY_LIMIT;
+    range->min_retry = 0;
+    range->max_retry = 255;
+
+    range->num_frequency = range->num_channels = ar->arNumChannels;
+    for (i = 0; i < ar->arNumChannels; i++) {
+        range->freq[i].i = wlan_freq2ieee(ar->arChannelList[i]);
+        range->freq[i].m = ar->arChannelList[i] * 100000;
+        range->freq[i].e = 1;
+         /*
+         * Linux supports max of 32 channels, bail out once you
+         * reach the max.
+         */
+        if (i == IW_MAX_FREQUENCIES) {
+            break;
+        }
+    }
+
+    /* Max quality is max field value minus noise floor */
+    range->max_qual.qual  = 0xff - 161;
+
+    /*
+     * In order to use dBm measurements, 'level' must be lower
+     * than any possible measurement (see iw_print_stats() in
+     * wireless tools).  It's unclear how this is meant to be
+     * done, but setting zero in these values forces dBm and
+     * the actual numbers are not used.
+     */
+    range->max_qual.level = 0;
+    range->max_qual.noise = 0;
+
+    range->sensitivity = 3;
+
+    range->max_encoding_tokens = 4;
+    /* XXX query driver to find out supported key sizes */
+    range->num_encoding_sizes = 3;
+    range->encoding_size[0] = 5;        /* 40-bit */
+    range->encoding_size[1] = 13;       /* 104-bit */
+    range->encoding_size[2] = 16;       /* 128-bit */
+
+    range->num_bitrates = 0;
+
+    /* estimated maximum TCP throughput values (bps) */
+    range->throughput = 22000000;
+
+    range->min_rts = 0;
+    range->max_rts = 2347;
+    range->min_frag = 256;
+    range->max_frag = 2346;
+
+    up(&ar->arSem);
+
+    return ret;
+}
+
+
+/*
+ * SIOCSIWAP
+ * This ioctl is used to set the desired bssid for the connect command.
+ */
+int
+ar6000_ioctl_siwap(struct net_device *dev,
+              struct iw_request_info *info,
+              struct sockaddr *ap_addr, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ap_addr->sa_family != ARPHRD_ETHER) {
+        return -EIO;
+    }
+
+    if (A_MEMCMP(&ap_addr->sa_data, bcast_mac, AR6000_ETH_ADDR_LEN) == 0) {
+        A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
+    } else {
+        A_MEMCPY(ar->arReqBssid, &ap_addr->sa_data,  sizeof(ar->arReqBssid));
+    }
+
+    return 0;
+}
+
+/*
+ * SIOCGIWAP
+ */
+int
+ar6000_ioctl_giwap(struct net_device *dev,
+              struct iw_request_info *info,
+              struct sockaddr *ap_addr, char *extra)
+{
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    if (ar->arConnected != TRUE) {
+        return -EINVAL;
+    }
+
+    A_MEMCPY(&ap_addr->sa_data, ar->arBssid, sizeof(ar->arBssid));
+    ap_addr->sa_family = ARPHRD_ETHER;
+
+    return 0;
+}
+
+/*
+ * SIOCGIWAPLIST
+ */
+int
+ar6000_ioctl_iwaplist(struct net_device *dev,
+            struct iw_request_info *info,
+            struct iw_point *data, char *extra)
+{
+    return -EIO;            /* for now */
+}
+
+/*
+ * SIOCSIWSCAN
+ */
+int
+ar6000_ioctl_siwscan(struct net_device *dev,
+                     struct iw_request_info *info,
+                     struct iw_point *data, char *extra)
+{
+#define ACT_DWELLTIME_DEFAULT   105
+#define HOME_TXDRAIN_TIME       100
+#define SCAN_INT                HOME_TXDRAIN_TIME + ACT_DWELLTIME_DEFAULT
+    AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+    int ret = 0;
+
+    if (ar->arWmiReady == FALSE) {
+        return -EIO;
+    }
+
+    if (ar->arWlanState == WLAN_DISABLED) {
+        return -EIO;
+    }
+
+    /* We ask for everything from the target */
+    if (wmi_bssfilter_cmd(ar->arWmi, ALL_BSS_FILTER, 0) != A_OK) {
+	    printk("Couldn't set filtering\n");
+	    ret = -EIO;
+    }
+
+    if (wmi_startscan_cmd(ar->arWmi, WMI_LONG_SCAN, FALSE, FALSE, \
+                          HOME_TXDRAIN_TIME, SCAN_INT) != A_OK) {
+        ret = -EIO;
+    }
+
+    ar->scan_complete = 0;
+    wait_event_interruptible_timeout(ar6000_scan_queue, ar->scan_complete,
+				     5 * HZ);
+
+    if (wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0) != A_OK) {
+	    printk("Couldn't set filtering\n");
+	    ret = -EIO;
+    }
+
+    return ret;
+#undef  ACT_DWELLTIME_DEFAULT
+#undef HOME_TXDRAIN_TIME
+#undef SCAN_INT
+}
+
+
+/*
+ * Units are in db above the noise floor. That means the
+ * rssi values reported in the tx/rx descriptors in the
+ * driver are the SNR expressed in db.
+ *
+ * If you assume that the noise floor is -95, which is an
+ * excellent assumption 99.5 % of the time, then you can
+ * derive the absolute signal level (i.e. -95 + rssi).
+ * There are some other slight factors to take into account
+ * depending on whether the rssi measurement is from 11b,
+ * 11g, or 11a.   These differences are at most 2db and
+ * can be documented.
+ *
+ * NB: various calculations are based on the orinoco/wavelan
+ *     drivers for compatibility
+ */
+static void
+ar6000_set_quality(struct iw_quality *iq, A_INT8 rssi)
+{
+    if (rssi < 0) {
+        iq->qual = 0;
+    } else {
+        iq->qual = rssi;
+    }
+
+    /* NB: max is 94 because noise is hardcoded to 161 */
+    if (iq->qual > 94)
+        iq->qual = 94;
+
+    iq->noise = 161;        /* -95dBm */
+    iq->level = iq->noise + iq->qual;
+    iq->updated = 7;
+}
+
+
+/* Structures to export the Wireless Handlers */
+static const iw_handler ath_handlers[] = {
+    (iw_handler) NULL,                          /* SIOCSIWCOMMIT */
+    (iw_handler) ar6000_ioctl_giwname,          /* SIOCGIWNAME */
+    (iw_handler) NULL,                          /* SIOCSIWNWID */
+    (iw_handler) NULL,                          /* SIOCGIWNWID */
+    (iw_handler) ar6000_ioctl_siwfreq,          /* SIOCSIWFREQ */
+    (iw_handler) ar6000_ioctl_giwfreq,          /* SIOCGIWFREQ */
+    (iw_handler) ar6000_ioctl_siwmode,          /* SIOCSIWMODE */
+    (iw_handler) ar6000_ioctl_giwmode,          /* SIOCGIWMODE */
+    (iw_handler) ar6000_ioctl_siwsens,          /* SIOCSIWSENS */
+    (iw_handler) ar6000_ioctl_giwsens,          /* SIOCGIWSENS */
+    (iw_handler) NULL /* not _used */,          /* SIOCSIWRANGE */
+    (iw_handler) ar6000_ioctl_giwrange,         /* SIOCGIWRANGE */
+    (iw_handler) NULL /* not used */,           /* SIOCSIWPRIV */
+    (iw_handler) NULL /* kernel code */,        /* SIOCGIWPRIV */
+    (iw_handler) NULL /* not used */,           /* SIOCSIWSTATS */
+    (iw_handler) NULL /* kernel code */,        /* SIOCGIWSTATS */
+    (iw_handler) NULL,                          /* SIOCSIWSPY */
+    (iw_handler) NULL,                          /* SIOCGIWSPY */
+    (iw_handler) NULL,                          /* SIOCSIWTHRSPY */
+    (iw_handler) NULL,                          /* SIOCGIWTHRSPY */
+    (iw_handler) ar6000_ioctl_siwap,            /* SIOCSIWAP */
+    (iw_handler) ar6000_ioctl_giwap,            /* SIOCGIWAP */
+    (iw_handler) NULL,                          /* -- hole -- */
+    (iw_handler) ar6000_ioctl_iwaplist,         /* SIOCGIWAPLIST */
+    (iw_handler) ar6000_ioctl_siwscan,          /* SIOCSIWSCAN */
+    (iw_handler) ar6000_ioctl_giwscan,          /* SIOCGIWSCAN */
+    (iw_handler) ar6000_ioctl_siwessid,         /* SIOCSIWESSID */
+    (iw_handler) ar6000_ioctl_giwessid,         /* SIOCGIWESSID */
+    (iw_handler) NULL,                          /* SIOCSIWNICKN */
+    (iw_handler) NULL,                          /* SIOCGIWNICKN */
+    (iw_handler) NULL,                          /* -- hole -- */
+    (iw_handler) NULL,                          /* -- hole -- */
+    (iw_handler) ar6000_ioctl_siwrate,          /* SIOCSIWRATE */
+    (iw_handler) ar6000_ioctl_giwrate,          /* SIOCGIWRATE */
+    (iw_handler) NULL,           /* SIOCSIWRTS */
+    (iw_handler) NULL,           /* SIOCGIWRTS */
+    (iw_handler) NULL,          /* SIOCSIWFRAG */
+    (iw_handler) NULL,          /* SIOCGIWFRAG */
+    (iw_handler) ar6000_ioctl_siwtxpow,         /* SIOCSIWTXPOW */
+    (iw_handler) ar6000_ioctl_giwtxpow,         /* SIOCGIWTXPOW */
+    (iw_handler) ar6000_ioctl_siwretry,         /* SIOCSIWRETRY */
+    (iw_handler) ar6000_ioctl_giwretry,         /* SIOCGIWRETRY */
+    (iw_handler) ar6000_ioctl_siwencode,        /* SIOCSIWENCODE */
+    (iw_handler) ar6000_ioctl_giwencode,        /* SIOCGIWENCODE */
+    (iw_handler) ar6000_ioctl_siwpower,         /* SIOCSIWPOWER */
+    (iw_handler) ar6000_ioctl_giwpower,         /* SIOCGIWPOWER */
+    (iw_handler) NULL,	/* -- hole -- */
+    (iw_handler) NULL,	/* -- hole -- */
+    (iw_handler) ar6000_ioctl_siwgenie,	/* SIOCSIWGENIE */
+    (iw_handler) ar6000_ioctl_giwgenie,	/* SIOCGIWGENIE */
+    (iw_handler) ar6000_ioctl_siwauth,	/* SIOCSIWAUTH */
+    (iw_handler) ar6000_ioctl_giwauth,	/* SIOCGIWAUTH */
+    (iw_handler) ar6000_ioctl_siwencodeext,/* SIOCSIWENCODEEXT */
+    (iw_handler) ar6000_ioctl_giwencodeext,/* SIOCGIWENCODEEXT */
+    (iw_handler) NULL,		/* SIOCSIWPMKSA */
+};
+
+static const iw_handler ath_priv_handlers[] = {
+    (iw_handler) ar6000_ioctl_setparam,         /* SIOCWFIRSTPRIV+0 */
+    (iw_handler) ar6000_ioctl_getparam,         /* SIOCWFIRSTPRIV+1 */
+    (iw_handler) ar6000_ioctl_setkey,           /* SIOCWFIRSTPRIV+2 */
+    (iw_handler) ar6000_ioctl_setwmmparams,     /* SIOCWFIRSTPRIV+3 */
+    (iw_handler) ar6000_ioctl_delkey,           /* SIOCWFIRSTPRIV+4 */
+    (iw_handler) ar6000_ioctl_getwmmparams,     /* SIOCWFIRSTPRIV+5 */
+    (iw_handler) ar6000_ioctl_setoptie,         /* SIOCWFIRSTPRIV+6 */
+    (iw_handler) ar6000_ioctl_setmlme,          /* SIOCWFIRSTPRIV+7 */
+    (iw_handler) ar6000_ioctl_addpmkid,         /* SIOCWFIRSTPRIV+8 */
+};
+
+#define IW_PRIV_TYPE_KEY \
+    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_key))
+#define IW_PRIV_TYPE_DELKEY \
+    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_del_key))
+#define IW_PRIV_TYPE_MLME \
+    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_mlme))
+#define IW_PRIV_TYPE_ADDPMKID \
+    (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_addpmkid))
+
+static const struct iw_priv_args ar6000_priv_args[] = {
+    { IEEE80211_IOCTL_SETKEY,
+      IW_PRIV_TYPE_KEY | IW_PRIV_SIZE_FIXED, 0,       "setkey"},
+    { IEEE80211_IOCTL_DELKEY,
+      IW_PRIV_TYPE_DELKEY | IW_PRIV_SIZE_FIXED, 0,    "delkey"},
+    { IEEE80211_IOCTL_SETPARAM,
+      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0,   "setparam"},
+    { IEEE80211_IOCTL_GETPARAM,
+      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,      "getparam"},
+    { IEEE80211_IOCTL_SETWMMPARAMS,
+      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, 0,   "setwmmparams"},
+    { IEEE80211_IOCTL_GETWMMPARAMS,
+      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 3,
+      IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,      "getwmmparams"},
+    { IEEE80211_IOCTL_SETOPTIE,
+      IW_PRIV_TYPE_BYTE, 0,       "setie"},
+    { IEEE80211_IOCTL_SETMLME,
+      IW_PRIV_TYPE_MLME, 0,       "setmlme"},
+    { IEEE80211_IOCTL_ADDPMKID,
+      IW_PRIV_TYPE_ADDPMKID | IW_PRIV_SIZE_FIXED, 0,  "addpmkid"},
+};
+
+void ar6000_ioctl_iwsetup(struct iw_handler_def *def)
+{
+    def->private_args = (struct iw_priv_args *)ar6000_priv_args;
+    def->num_private_args = ARRAY_SIZE(ar6000_priv_args);
+}
+
+struct iw_handler_def ath_iw_handler_def = {
+    .standard         = (iw_handler *)ath_handlers,
+    .num_standard     = ARRAY_SIZE(ath_handlers),
+    .private          = (iw_handler *)ath_priv_handlers,
+    .num_private      = ARRAY_SIZE(ath_priv_handlers),
+};
+
+
diff --git a/drivers/ar6000/bmi/bmi.c b/drivers/ar6000/bmi/bmi.c
new file mode 100644
index 00000000000..d7b610c153e
--- /dev/null
+++ b/drivers/ar6000/bmi/bmi.c
@@ -0,0 +1,657 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "hif.h"
+#include "bmi.h"
+#include "htc_api.h"
+#include "bmi_internal.h"
+
+/*
+Although we had envisioned BMI to run on top of HTC, this is not what the
+final implementation boiled down to on dragon. Its a part of BSP and does
+not use the HTC protocol either. On the host side, however, we were still
+living with the original idea. I think the time has come to accept the truth
+and separate it from HTC which has been carrying BMI's burden all this while.
+It shall make HTC state machine relatively simpler
+*/
+
+/* APIs visible to the driver */
+void
+BMIInit(void)
+{
+    bmiDone = FALSE;
+}
+
+A_STATUS
+BMIDone(HIF_DEVICE *device)
+{
+    A_STATUS status;
+    A_UINT32 cid;
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF (ATH_DEBUG_BMI, ("BMIDone skipped\n"));
+        return A_OK;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Enter (device: 0x%p)\n", device));
+    bmiDone = TRUE;
+    cid = BMI_DONE;
+
+    status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid));
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Exit\n"));
+
+    return A_OK;
+}
+
+A_STATUS
+BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info)
+{
+    A_STATUS status;
+    A_UINT32 cid;
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Enter (device: 0x%p)\n", device));
+    cid = BMI_GET_TARGET_INFO;
+
+    status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid));
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_ver,
+                                                sizeof(targ_info->target_ver));
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Version from the device\n"));
+        return A_ERROR;
+    }
+
+    if (targ_info->target_ver == TARGET_VERSION_SENTINAL) {
+        /* Determine how many bytes are in the Target's targ_info */
+        status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_info_byte_count,
+                                            sizeof(targ_info->target_info_byte_count));
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info Byte Count from the device\n"));
+            return A_ERROR;
+        }
+
+        /*
+         * The Target's targ_info doesn't match the Host's targ_info.
+         * We need to do some backwards compatibility work to make this OK.
+         */
+        A_ASSERT(targ_info->target_info_byte_count == sizeof(*targ_info));
+
+        /* Read the remainder of the targ_info */
+        status = bmiBufferReceive(device,
+                        ((A_UCHAR *)targ_info)+sizeof(targ_info->target_info_byte_count),
+                        sizeof(*targ_info)-sizeof(targ_info->target_info_byte_count));
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info (%d bytes) from the device\n",
+                        					targ_info->target_info_byte_count));
+            return A_ERROR;
+        }
+    } else {
+        /*
+         * Target must be an AR6001 whose firmware does not
+         * support BMI_GET_TARGET_INFO.  Construct the data
+         * that it would have sent.
+         */
+        targ_info->target_info_byte_count = sizeof(targ_info);
+        targ_info->target_type = TARGET_TYPE_AR6001;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n",
+        							targ_info->target_ver, targ_info->target_type));
+    printk("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n",
+	   targ_info->target_ver, targ_info->target_type);
+
+    return A_OK;
+}
+
+A_STATUS
+BMIReadMemory(HIF_DEVICE *device,
+              A_UINT32 address,
+              A_UCHAR *buffer,
+              A_UINT32 length)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    A_UINT32 remaining, rxlen;
+    static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)];
+    memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+       			("BMI Read Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n",
+        			device, address, length));
+
+    cid = BMI_READ_MEMORY;
+
+    remaining = length;
+
+    while (remaining)
+    {
+        rxlen = (remaining < BMI_DATASZ_MAX) ? remaining : BMI_DATASZ_MAX;
+        offset = 0;
+        A_MEMCPY(&data[offset], &cid, sizeof(cid));
+        offset += sizeof(cid);
+        A_MEMCPY(&data[offset], &address, sizeof(address));
+        offset += sizeof(address);
+        A_MEMCPY(&data[offset], &rxlen, sizeof(rxlen));
+        offset += sizeof(length);
+
+        status = bmiBufferSend(device, data, offset);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+            return A_ERROR;
+        }
+        status = bmiBufferReceive(device, data, rxlen);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
+            return A_ERROR;
+        }
+        A_MEMCPY(&buffer[length - remaining], data, rxlen);
+        remaining -= rxlen; address += rxlen;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read Memory: Exit\n"));
+    return A_OK;
+}
+
+A_STATUS
+BMIWriteMemory(HIF_DEVICE *device,
+               A_UINT32 address,
+               A_UCHAR *buffer,
+               A_UINT32 length)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    A_UINT32 remaining, txlen;
+    const A_UINT32 header = sizeof(cid) + sizeof(address) + sizeof(length);
+    static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)];
+	memset (&data, 0, header);
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+         ("BMI Write Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n",
+         device, address, length));
+
+    cid = BMI_WRITE_MEMORY;
+
+    remaining = length;
+    while (remaining)
+    {
+        txlen = (remaining < (BMI_DATASZ_MAX - header)) ?
+                                       remaining : (BMI_DATASZ_MAX - header);
+        offset = 0;
+        A_MEMCPY(&data[offset], &cid, sizeof(cid));
+        offset += sizeof(cid);
+        A_MEMCPY(&data[offset], &address, sizeof(address));
+        offset += sizeof(address);
+        A_MEMCPY(&data[offset], &txlen, sizeof(txlen));
+        offset += sizeof(txlen);
+        A_MEMCPY(&data[offset], &buffer[length - remaining], txlen);
+        offset += txlen;
+        status = bmiBufferSend(device, data, offset);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+            return A_ERROR;
+        }
+        remaining -= txlen; address += txlen;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Write Memory: Exit\n"));
+
+    return A_OK;
+}
+
+A_STATUS
+BMIExecute(HIF_DEVICE *device,
+           A_UINT32 address,
+           A_UINT32 *param)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(*param)];
+    memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(*param));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+       ("BMI Execute: Enter (device: 0x%p, address: 0x%x, param: %d)\n",
+        device, address, *param));
+
+    cid = BMI_EXECUTE;
+
+    offset = 0;
+    A_MEMCPY(&data[offset], &cid, sizeof(cid));
+    offset += sizeof(cid);
+    A_MEMCPY(&data[offset], &address, sizeof(address));
+    offset += sizeof(address);
+    A_MEMCPY(&data[offset], param, sizeof(*param));
+    offset += sizeof(*param);
+    status = bmiBufferSend(device, data, offset);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    status = bmiBufferReceive(device, data, sizeof(*param));
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
+        return A_ERROR;
+    }
+
+    A_MEMCPY(param, data, sizeof(*param));
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Execute: Exit (param: %d)\n", *param));
+    return A_OK;
+}
+
+A_STATUS
+BMISetAppStart(HIF_DEVICE *device,
+               A_UINT32 address)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    static A_UCHAR data[sizeof(cid) + sizeof(address)];
+    memset (&data, 0, sizeof(cid) + sizeof(address));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+       ("BMI Set App Start: Enter (device: 0x%p, address: 0x%x)\n",
+        device, address));
+
+    cid = BMI_SET_APP_START;
+
+    offset = 0;
+    A_MEMCPY(&data[offset], &cid, sizeof(cid));
+    offset += sizeof(cid);
+    A_MEMCPY(&data[offset], &address, sizeof(address));
+    offset += sizeof(address);
+    status = bmiBufferSend(device, data, offset);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Set App Start: Exit\n"));
+    return A_OK;
+}
+
+A_STATUS
+BMIReadSOCRegister(HIF_DEVICE *device,
+                   A_UINT32 address,
+                   A_UINT32 *param)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    static A_UCHAR data[sizeof(cid) + sizeof(address)];
+    memset (&data, 0, sizeof(cid) + sizeof(address));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+       ("BMI Read SOC Register: Enter (device: 0x%p, address: 0x%x)\n",
+       device, address));
+
+    cid = BMI_READ_SOC_REGISTER;
+
+    offset = 0;
+    A_MEMCPY(&data[offset], &cid, sizeof(cid));
+    offset += sizeof(cid);
+    A_MEMCPY(&data[offset], &address, sizeof(address));
+    offset += sizeof(address);
+
+    status = bmiBufferSend(device, data, offset);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    status = bmiBufferReceive(device, data, sizeof(*param));
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
+        return A_ERROR;
+    }
+    A_MEMCPY(param, data, sizeof(*param));
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit (value: %d)\n", *param));
+    return A_OK;
+}
+
+A_STATUS
+BMIWriteSOCRegister(HIF_DEVICE *device,
+                    A_UINT32 address,
+                    A_UINT32 param)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(param)];
+
+    memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(param));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+     ("BMI Write SOC Register: Enter (device: 0x%p, address: 0x%x, param: %d)\n",
+     device, address, param));
+
+    cid = BMI_WRITE_SOC_REGISTER;
+
+    offset = 0;
+    A_MEMCPY(&data[offset], &cid, sizeof(cid));
+    offset += sizeof(cid);
+    A_MEMCPY(&data[offset], &address, sizeof(address));
+    offset += sizeof(address);
+    A_MEMCPY(&data[offset], &param, sizeof(param));
+    offset += sizeof(param);
+    status = bmiBufferSend(device, data, offset);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit\n"));
+    return A_OK;
+}
+
+A_STATUS
+BMIrompatchInstall(HIF_DEVICE *device,
+                   A_UINT32 ROM_addr,
+                   A_UINT32 RAM_addr,
+                   A_UINT32 nbytes,
+                   A_UINT32 do_activate,
+                   A_UINT32 *rompatch_id)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    static A_UCHAR data[sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) +
+                                sizeof(nbytes) + sizeof(do_activate)];
+
+	memset (&data, 0, sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) +
+                      sizeof(nbytes) + sizeof(do_activate));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+         ("BMI rompatch Install: Enter (device: 0x%p, ROMaddr: 0x%x, RAMaddr: 0x%x length: %d activate: %d)\n",
+         device, ROM_addr, RAM_addr, nbytes, do_activate));
+
+    cid = BMI_ROMPATCH_INSTALL;
+
+    offset = 0;
+    A_MEMCPY(&data[offset], &cid, sizeof(cid));
+    offset += sizeof(cid);
+    A_MEMCPY(&data[offset], &ROM_addr, sizeof(ROM_addr));
+    offset += sizeof(ROM_addr);
+    A_MEMCPY(&data[offset], &RAM_addr, sizeof(RAM_addr));
+    offset += sizeof(RAM_addr);
+    A_MEMCPY(&data[offset], &nbytes, sizeof(nbytes));
+    offset += sizeof(nbytes);
+    A_MEMCPY(&data[offset], &do_activate, sizeof(do_activate));
+    offset += sizeof(do_activate);
+    status = bmiBufferSend(device, data, offset);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    status = bmiBufferReceive(device, (A_UCHAR *)rompatch_id, sizeof(*rompatch_id));
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch Install: (rompatch_id=%d)\n", *rompatch_id));
+    return A_OK;
+}
+
+A_STATUS
+BMIrompatchUninstall(HIF_DEVICE *device,
+                     A_UINT32 rompatch_id)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    static A_UCHAR data[sizeof(cid) + sizeof(rompatch_id)];
+    memset (&data, 0, sizeof(cid) + sizeof(rompatch_id));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+         ("BMI rompatch Uninstall: Enter (device: 0x%p, rompatch_id: %d)\n",
+         								 device, rompatch_id));
+
+    cid = BMI_ROMPATCH_UNINSTALL;
+
+    offset = 0;
+    A_MEMCPY(&data[offset], &cid, sizeof(cid));
+    offset += sizeof(cid);
+    A_MEMCPY(&data[offset], &rompatch_id, sizeof(rompatch_id));
+    offset += sizeof(rompatch_id);
+    status = bmiBufferSend(device, data, offset);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch UNinstall: (rompatch_id=0x%x)\n", rompatch_id));
+    return A_OK;
+}
+
+static A_STATUS
+_BMIrompatchChangeActivation(HIF_DEVICE *device,
+                             A_UINT32 rompatch_count,
+                             A_UINT32 *rompatch_list,
+                             A_UINT32 do_activate)
+{
+    A_UINT32 cid;
+    A_STATUS status;
+    A_UINT32 offset;
+    static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count)];
+    A_UINT32 length;
+
+	memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count));
+
+    if (bmiDone) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+         ("BMI Change rompatch Activation: Enter (device: 0x%p, count: %d)\n",
+           device, rompatch_count));
+
+    cid = do_activate ? BMI_ROMPATCH_ACTIVATE : BMI_ROMPATCH_DEACTIVATE;
+
+    offset = 0;
+    A_MEMCPY(&data[offset], &cid, sizeof(cid));
+    offset += sizeof(cid);
+    A_MEMCPY(&data[offset], &rompatch_count, sizeof(rompatch_count));
+    offset += sizeof(rompatch_count);
+    length = rompatch_count * sizeof(*rompatch_list);
+    A_MEMCPY(&data[offset], rompatch_list, length);
+    offset += length;
+    status = bmiBufferSend(device, data, offset);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+        return A_ERROR;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Change rompatch Activation: Exit\n"));
+
+    return A_OK;
+}
+
+A_STATUS
+BMIrompatchActivate(HIF_DEVICE *device,
+                    A_UINT32 rompatch_count,
+                    A_UINT32 *rompatch_list)
+{
+    return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 1);
+}
+
+A_STATUS
+BMIrompatchDeactivate(HIF_DEVICE *device,
+                      A_UINT32 rompatch_count,
+                      A_UINT32 *rompatch_list)
+{
+    return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 0);
+}
+
+/* BMI Access routines */
+A_STATUS
+bmiBufferSend(HIF_DEVICE *device,
+              A_UCHAR *buffer,
+              A_UINT32 length)
+{
+    A_STATUS status;
+    A_UINT32 timeout;
+    A_UINT32 address;
+    static A_UINT32 cmdCredits;
+    A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX];
+
+    HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR,
+                       &mboxAddress, sizeof(mboxAddress));
+
+    cmdCredits = 0;
+    timeout = BMI_COMMUNICATION_TIMEOUT;
+
+    while(timeout-- && !cmdCredits) {
+        /* Read the counter register to get the command credits */
+        address = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4;
+        /* hit the credit counter with a 4-byte access, the first byte read will hit the counter and cause
+         * a decrement, while the remaining 3 bytes has no effect.  The rationale behind this is to
+         * make all HIF accesses 4-byte aligned */
+        status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, 4,
+            HIF_RD_SYNC_BYTE_INC, NULL);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to decrement the command credit count register\n"));
+            return A_ERROR;
+        }
+        /* the counter is only 8=bits, ignore anything in the upper 3 bytes */
+        cmdCredits &= 0xFF;
+    }
+
+    if (cmdCredits) {
+        address = mboxAddress[ENDPOINT1];
+        status = HIFReadWrite(device, address, buffer, length,
+            HIF_WR_SYNC_BYTE_INC, NULL);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to send the BMI data to the device\n"));
+            return A_ERROR;
+        }
+    } else {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout\n"));
+        return A_ERROR;
+    }
+
+    return status;
+}
+
+A_STATUS
+bmiBufferReceive(HIF_DEVICE *device,
+                 A_UCHAR *buffer,
+                 A_UINT32 length)
+{
+    A_STATUS status;
+    A_UINT32 address;
+    A_UINT32 timeout;
+    static A_UINT32 cmdCredits;
+    A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX];
+
+    HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR,
+                       &mboxAddress, sizeof(mboxAddress));
+
+    cmdCredits = 0;
+    timeout = BMI_COMMUNICATION_TIMEOUT;
+    while(timeout-- && !cmdCredits) {
+        /* Read the counter register to get the command credits */
+        address = COUNT_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 1;
+        /* read the counter using a 4-byte read.  Since the counter is NOT auto-decrementing,
+         * we can read this counter multiple times using a non-incrementing address mode.
+         * The rationale here is to make all HIF accesses a multiple of 4 bytes */
+        status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, sizeof(cmdCredits),
+            HIF_RD_SYNC_BYTE_FIX, NULL);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the command credit count register\n"));
+            return A_ERROR;
+        }
+            /* we did a 4-byte read to the same count register so mask off upper bytes */
+        cmdCredits &= 0xFF;
+        status = A_ERROR;
+    }
+
+    if (cmdCredits) {
+        address = mboxAddress[ENDPOINT1];
+        status = HIFReadWrite(device, address, buffer, length,
+            HIF_RD_SYNC_BYTE_INC, NULL);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the BMI data from the device\n"));
+            return A_ERROR;
+        }
+    } else {
+        AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Communication timeout\n"));
+        return A_ERROR;
+    }
+
+    return status;
+}
diff --git a/drivers/ar6000/bmi/bmi_internal.h b/drivers/ar6000/bmi/bmi_internal.h
new file mode 100644
index 00000000000..1e213540c76
--- /dev/null
+++ b/drivers/ar6000/bmi/bmi_internal.h
@@ -0,0 +1,45 @@
+#ifndef BMI_INTERNAL_H
+#define BMI_INTERNAL_H
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "AR6Khwreg.h"
+#include "bmi_msg.h"
+
+#define BMI_COMMUNICATION_TIMEOUT       100000
+
+/* ------ Global Variable Declarations ------- */
+A_BOOL bmiDone;
+
+A_STATUS
+bmiBufferSend(HIF_DEVICE *device,
+              A_UCHAR *buffer,
+              A_UINT32 length);
+
+A_STATUS
+bmiBufferReceive(HIF_DEVICE *device,
+                 A_UCHAR *buffer,
+                 A_UINT32 length);
+
+#endif
diff --git a/drivers/ar6000/hif/hif.c b/drivers/ar6000/hif/hif.c
new file mode 100644
index 00000000000..d04486c35b0
--- /dev/null
+++ b/drivers/ar6000/hif/hif.c
@@ -0,0 +1,824 @@
+/*
+ * @file: hif.c
+ *
+ * @abstract: HIF layer reference implementation for Atheros SDIO stack
+ *
+ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "hif_internal.h"
+
+/* ------ Static Variables ------ */
+
+/* ------ Global Variable Declarations ------- */
+SD_PNP_INFO Ids[] = {
+    {
+        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0xB,
+        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+        .SDIO_FunctionClass = FUNCTION_CLASS,
+        .SDIO_FunctionNo = 1
+    },
+    {
+        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0xA,
+        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+        .SDIO_FunctionClass = FUNCTION_CLASS,
+        .SDIO_FunctionNo = 1
+    },
+    {
+        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0x9,
+        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+        .SDIO_FunctionClass = FUNCTION_CLASS,
+        .SDIO_FunctionNo = 1
+    },
+    {
+        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0x8,
+        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+        .SDIO_FunctionClass = FUNCTION_CLASS,
+        .SDIO_FunctionNo = 1
+    },
+    {
+        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6002_BASE | 0x0,
+        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+        .SDIO_FunctionClass = FUNCTION_CLASS,
+        .SDIO_FunctionNo = 1
+    },
+    {
+        .SDIO_ManufacturerID = MANUFACTURER_ID_AR6002_BASE | 0x1,
+        .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+        .SDIO_FunctionClass = FUNCTION_CLASS,
+        .SDIO_FunctionNo = 1
+    },
+    {
+    }                      //list is null termintaed
+};
+
+TARGET_FUNCTION_CONTEXT FunctionContext = {
+    .function.Version    = CT_SDIO_STACK_VERSION_CODE,
+    .function.pName      = "sdio_wlan",
+    .function.MaxDevices = 1,
+    .function.NumDevices = 0,
+    .function.pIds       = Ids,
+    .function.pProbe     = hifDeviceInserted,
+    .function.pRemove    = hifDeviceRemoved,
+    .function.pSuspend   = NULL,
+    .function.pResume    = NULL,
+    .function.pWake      = NULL,
+    .function.pContext   = &FunctionContext,
+};
+
+HIF_DEVICE hifDevice[HIF_MAX_DEVICES];
+HTC_CALLBACKS htcCallbacks;
+BUS_REQUEST busRequest[BUS_REQUEST_MAX_NUM];
+static BUS_REQUEST *s_busRequestFreeQueue = NULL;
+OS_CRITICALSECTION lock;
+extern A_UINT32 onebitmode;
+extern A_UINT32 busspeedlow;
+
+#ifdef DEBUG
+extern A_UINT32 debughif;
+#define ATH_DEBUG_ERROR 1
+#define ATH_DEBUG_WARN  2
+#define ATH_DEBUG_TRACE 3
+#define _AR_DEBUG_PRINTX_ARG(arg...) arg
+#define AR_DEBUG_PRINTF(lvl, args)\
+    {if (lvl <= debughif)\
+        A_PRINTF(KERN_ALERT _AR_DEBUG_PRINTX_ARG args);\
+    }
+#else
+#define AR_DEBUG_PRINTF(lvl, args)
+#endif
+
+static BUS_REQUEST *hifAllocateBusRequest(void);
+static void hifFreeBusRequest(BUS_REQUEST *busrequest);
+static THREAD_RETURN insert_helper_func(POSKERNEL_HELPER pHelper);
+static void ResetAllCards(void);
+
+/* ------ Functions ------ */
+int HIFInit(HTC_CALLBACKS *callbacks)
+{
+    SDIO_STATUS status;
+    DBG_ASSERT(callbacks != NULL);
+
+    /* Store the callback and event handlers */
+    htcCallbacks.deviceInsertedHandler = callbacks->deviceInsertedHandler;
+    htcCallbacks.deviceRemovedHandler = callbacks->deviceRemovedHandler;
+    htcCallbacks.deviceSuspendHandler = callbacks->deviceSuspendHandler;
+    htcCallbacks.deviceResumeHandler = callbacks->deviceResumeHandler;
+    htcCallbacks.deviceWakeupHandler = callbacks->deviceWakeupHandler;
+    htcCallbacks.rwCompletionHandler = callbacks->rwCompletionHandler;
+    htcCallbacks.dsrHandler = callbacks->dsrHandler;
+
+    CriticalSectionInit(&lock);
+
+    /* Register with bus driver core */
+    status = SDIO_RegisterFunction(&FunctionContext.function);
+    DBG_ASSERT(SDIO_SUCCESS(status));
+
+    return(0);
+}
+
+A_STATUS
+HIFReadWrite(HIF_DEVICE *device,
+             A_UINT32 address,
+             A_UCHAR *buffer,
+             A_UINT32 length,
+             A_UINT32 request,
+             void *context)
+{
+    A_UINT8 rw;
+    A_UINT8 mode;
+    A_UINT8 funcNo;
+    A_UINT8 opcode;
+    A_UINT16 count;
+    SDREQUEST *sdrequest;
+    SDIO_STATUS sdiostatus;
+    BUS_REQUEST *busrequest;
+    A_STATUS    status = A_OK;
+
+    DBG_ASSERT(device != NULL);
+    DBG_ASSERT(device->handle != NULL);
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
+
+    do {
+        busrequest = hifAllocateBusRequest();
+        if (busrequest == NULL) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("HIF Unable to allocate bus request\n"));
+            status = A_NO_RESOURCE;
+            break;
+        }
+
+        sdrequest = busrequest->request;
+        busrequest->context = context;
+
+        sdrequest->pDataBuffer = buffer;
+        if (request & HIF_SYNCHRONOUS) {
+            sdrequest->Flags = SDREQ_FLAGS_RESP_SDIO_R5 | SDREQ_FLAGS_DATA_TRANS;
+            sdrequest->pCompleteContext = NULL;
+            sdrequest->pCompletion = NULL;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Execution mode: Synchronous\n"));
+        } else if (request & HIF_ASYNCHRONOUS) {
+            sdrequest->Flags = SDREQ_FLAGS_RESP_SDIO_R5 | SDREQ_FLAGS_DATA_TRANS |
+                               SDREQ_FLAGS_TRANS_ASYNC;
+            sdrequest->pCompleteContext = busrequest;
+            sdrequest->pCompletion = hifRWCompletionHandler;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Execution mode: Asynchronous\n"));
+        } else {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                            ("Invalid execution mode: 0x%08x\n", request));
+            status = A_EINVAL;
+            break;
+        }
+
+        if (request & HIF_EXTENDED_IO) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Command type: CMD53\n"));
+            sdrequest->Command = CMD53;
+        } else {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                            ("Invalid command type: 0x%08x\n", request));
+            status = A_EINVAL;
+            break;
+        }
+
+        if (request & HIF_BLOCK_BASIS) {
+            mode = CMD53_BLOCK_BASIS;
+            sdrequest->BlockLen = HIF_MBOX_BLOCK_SIZE;
+            sdrequest->BlockCount = length / HIF_MBOX_BLOCK_SIZE;
+            count = sdrequest->BlockCount;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                            ("Block mode (BlockLen: %d, BlockCount: %d)\n",
+                            sdrequest->BlockLen, sdrequest->BlockCount));
+        } else if (request & HIF_BYTE_BASIS) {
+            mode = CMD53_BYTE_BASIS;
+            sdrequest->BlockLen = length;
+            sdrequest->BlockCount = 1;
+            count = sdrequest->BlockLen;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                            ("Byte mode (BlockLen: %d, BlockCount: %d)\n",
+                            sdrequest->BlockLen, sdrequest->BlockCount));
+        } else {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                            ("Invalid data mode: 0x%08x\n", request));
+            status = A_EINVAL;
+            break;
+        }
+
+#if 0
+        /* useful for checking register accesses */
+        if (length & 0x3) {
+            A_PRINTF(KERN_ALERT"HIF (%s) is not a multiple of 4 bytes, addr:0x%X, len:%d\n",
+                                request & HIF_WRITE ? "write":"read", address, length);
+        }
+#endif
+
+        if ((address >= HIF_MBOX_START_ADDR(0)) &&
+            (address <= HIF_MBOX_END_ADDR(3)))
+        {
+
+            DBG_ASSERT(length <= HIF_MBOX_WIDTH);
+
+            /*
+             * Mailbox write. Adjust the address so that the last byte
+             * falls on the EOM address.
+             */
+            address += (HIF_MBOX_WIDTH - length);
+        }
+
+
+
+        if (request & HIF_WRITE) {
+            rw = CMD53_WRITE;
+            sdrequest->Flags |= SDREQ_FLAGS_DATA_WRITE;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Direction: Write\n"));
+        } else if (request & HIF_READ) {
+            rw = CMD53_READ;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Direction: Read\n"));
+        } else {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                            ("Invalid direction: 0x%08x\n", request));
+            status = A_EINVAL;
+            break;
+        }
+
+        if (request & HIF_FIXED_ADDRESS) {
+            opcode = CMD53_FIXED_ADDRESS;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Address mode: Fixed\n"));
+        } else if (request & HIF_INCREMENTAL_ADDRESS) {
+            opcode = CMD53_INCR_ADDRESS;
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Address mode: Incremental\n"));
+        } else {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                            ("Invalid address mode: 0x%08x\n", request));
+            status = A_EINVAL;
+            break;
+        }
+
+        funcNo = SDDEVICE_GET_SDIO_FUNCNO(device->handle);
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Function number: %d\n", funcNo));
+        SDIO_SET_CMD53_ARG(sdrequest->Argument, rw, funcNo,
+                           mode, opcode, address, count);
+
+        /* Send the command out */
+        sdiostatus = SDDEVICE_CALL_REQUEST_FUNC(device->handle, sdrequest);
+
+        if (!SDIO_SUCCESS(sdiostatus)) {
+            status = A_ERROR;
+        }
+
+    } while (FALSE);
+
+    if (A_FAILED(status) || (request & HIF_SYNCHRONOUS)) {
+        if (busrequest != NULL) {
+            hifFreeBusRequest(busrequest);
+        }
+    }
+
+    if (A_FAILED(status) && (request & HIF_ASYNCHRONOUS)) {
+            /* call back async handler on failure */
+        htcCallbacks.rwCompletionHandler(context, status);
+    }
+
+    return status;
+}
+
+A_STATUS
+HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode,
+                   void *config, A_UINT32 configLen)
+{
+    A_UINT32 count;
+
+    switch(opcode) {
+        case HIF_DEVICE_GET_MBOX_BLOCK_SIZE:
+            ((A_UINT32 *)config)[0] = HIF_MBOX0_BLOCK_SIZE;
+            ((A_UINT32 *)config)[1] = HIF_MBOX1_BLOCK_SIZE;
+            ((A_UINT32 *)config)[2] = HIF_MBOX2_BLOCK_SIZE;
+            ((A_UINT32 *)config)[3] = HIF_MBOX3_BLOCK_SIZE;
+            break;
+
+        case HIF_DEVICE_GET_MBOX_ADDR:
+            for (count = 0; count < 4; count ++) {
+                ((A_UINT32 *)config)[count] = HIF_MBOX_START_ADDR(count);
+            }
+            break;
+        case HIF_DEVICE_GET_IRQ_PROC_MODE:
+                /* the SDIO stack allows the interrupts to be processed either way, ASYNC or SYNC */
+            *((HIF_DEVICE_IRQ_PROCESSING_MODE *)config) = HIF_DEVICE_IRQ_ASYNC_SYNC;
+            break;
+        default:
+            AR_DEBUG_PRINTF(ATH_DEBUG_WARN,
+                            ("Unsupported configuration opcode: %d\n", opcode));
+            return A_ERROR;
+    }
+
+    return A_OK;
+}
+
+void
+HIFShutDownDevice(HIF_DEVICE *device)
+{
+    A_UINT8 data;
+    A_UINT32 count;
+    SDIO_STATUS status;
+    SDCONFIG_BUS_MODE_DATA busSettings;
+    SDCONFIG_FUNC_ENABLE_DISABLE_DATA fData;
+
+    if (device != NULL) {
+        DBG_ASSERT(device->handle != NULL);
+
+        /* Remove the allocated current if any */
+        status = SDLIB_IssueConfig(device->handle,
+                                   SDCONFIG_FUNC_FREE_SLOT_CURRENT, NULL, 0);
+        DBG_ASSERT(SDIO_SUCCESS(status));
+
+        /* Disable the card */
+        fData.EnableFlags = SDCONFIG_DISABLE_FUNC;
+        fData.TimeOut = 1;
+        status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_ENABLE_DISABLE,
+                                   &fData, sizeof(fData));
+        DBG_ASSERT(SDIO_SUCCESS(status));
+
+        /* Perform a soft I/O reset */
+        data = SDIO_IO_RESET;
+        status = SDLIB_IssueCMD52(device->handle, 0, SDIO_IO_ABORT_REG,
+                                  &data, 1, 1);
+        DBG_ASSERT(SDIO_SUCCESS(status));
+
+        /*
+         * WAR - Codetelligence driver does not seem to shutdown correctly in 1
+         * bit mode. By default it configures the HC in the 4 bit. Its later in
+         * our driver that we switch to 1 bit mode. If we try to shutdown, the
+         * driver hangs so we revert to 4 bit mode, to be transparent to the
+         * underlying bus driver.
+         */
+        if (onebitmode) {
+            ZERO_OBJECT(busSettings);
+            busSettings.BusModeFlags = SDDEVICE_GET_BUSMODE_FLAGS(device->handle);
+            SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags,
+                                   SDCONFIG_BUS_WIDTH_4_BIT);
+
+            /* Issue config request to change the bus width to 4 bit */
+            status = SDLIB_IssueConfig(device->handle, SDCONFIG_BUS_MODE_CTRL,
+                                       &busSettings,
+                                       sizeof(SDCONFIG_BUS_MODE_DATA));
+            DBG_ASSERT(SDIO_SUCCESS(status));
+        }
+
+        /* Free the bus requests */
+        for (count = 0; count < BUS_REQUEST_MAX_NUM; count ++) {
+            SDDeviceFreeRequest(device->handle, busRequest[count].request);
+        }
+        /* Clean up the queue */
+        s_busRequestFreeQueue = NULL;
+    } else {
+            /* since we are unloading the driver anyways, reset all cards in case the SDIO card
+             * is externally powered and we are unloading the SDIO stack.  This avoids the problem when
+             * the SDIO stack is reloaded and attempts are made to re-enumerate a card that is already
+             * enumerated */
+        ResetAllCards();
+        /* Unregister with bus driver core */
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                        ("Unregistering with the bus driver\n"));
+        status = SDIO_UnregisterFunction(&FunctionContext.function);
+        DBG_ASSERT(SDIO_SUCCESS(status));
+    }
+}
+
+void
+hifRWCompletionHandler(SDREQUEST *request)
+{
+    A_STATUS status;
+    void *context;
+    BUS_REQUEST *busrequest;
+
+    if (SDIO_SUCCESS(request->Status)) {
+        status = A_OK;
+    } else {
+        status = A_ERROR;
+    }
+
+    DBG_ASSERT(status == A_OK);
+    busrequest = (BUS_REQUEST *) request->pCompleteContext;
+    context = (void *) busrequest->context;
+        /* free the request before calling the callback, in case the
+         * callback submits another request, this guarantees that
+         * there is at least 1 free request available everytime the callback
+         * is invoked */
+    hifFreeBusRequest(busrequest);
+    htcCallbacks.rwCompletionHandler(context, status);
+}
+
+void
+hifIRQHandler(void *context)
+{
+    A_STATUS status;
+    HIF_DEVICE *device;
+
+    device = (HIF_DEVICE *)context;
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
+    status = htcCallbacks.dsrHandler(device->htc_handle);
+    DBG_ASSERT(status == A_OK);
+}
+
+BOOL
+hifDeviceInserted(SDFUNCTION *function, SDDEVICE *handle)
+{
+    BOOL enabled;
+    A_UINT8 data;
+    A_UINT32 count;
+    HIF_DEVICE *device;
+    SDIO_STATUS status;
+    A_UINT16 maxBlocks;
+    A_UINT16 maxBlockSize;
+    SDCONFIG_BUS_MODE_DATA busSettings;
+    SDCONFIG_FUNC_ENABLE_DISABLE_DATA fData;
+    TARGET_FUNCTION_CONTEXT *functionContext;
+    SDCONFIG_FUNC_SLOT_CURRENT_DATA slotCurrent;
+    SD_BUSCLOCK_RATE                currentBusClock;
+
+    DBG_ASSERT(function != NULL);
+    DBG_ASSERT(handle != NULL);
+
+    device = addHifDevice(handle);
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
+    functionContext =  (TARGET_FUNCTION_CONTEXT *)function->pContext;
+
+    /*
+     * Issue commands to get the manufacturer ID and stuff and compare it
+     * against the rev Id derived from the ID registered during the
+     * initialization process. Report the device only in the case there
+     * is a match. In the case od SDIO, the bus driver has already queried
+     * these details so we just need to use their data structures to get the
+     * relevant values. Infact, the driver has already matched it against
+     * the Ids that we registered with it so we dont need to the step here.
+     */
+
+    /* Configure the SDIO Bus Width */
+    if (onebitmode) {
+        data = SDIO_BUS_WIDTH_1_BIT;
+        status = SDLIB_IssueCMD52(handle, 0, SDIO_BUS_IF_REG, &data, 1, 1);
+        if (!SDIO_SUCCESS(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                            ("Unable to set the bus width to 1 bit\n"));
+            return FALSE;
+        }
+    }
+
+    /* Get current bus flags */
+    ZERO_OBJECT(busSettings);
+
+    busSettings.BusModeFlags = SDDEVICE_GET_BUSMODE_FLAGS(handle);
+    if (onebitmode) {
+        SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags,
+                               SDCONFIG_BUS_WIDTH_1_BIT);
+    }
+
+        /* get the current operating clock, the bus driver sets us up based
+         * on what our CIS reports and what the host controller can handle
+         * we can use this to determine whether we want to drop our clock rate
+         * down */
+    currentBusClock = SDDEVICE_GET_OPER_CLOCK(handle);
+    busSettings.ClockRate = currentBusClock;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                        ("HIF currently running at: %d \n",currentBusClock));
+
+        /* see if HIF wants to run at a lower clock speed, we may already be
+         * at that lower clock speed */
+    if (currentBusClock > (SDIO_CLOCK_FREQUENCY_DEFAULT >> busspeedlow)) {
+        busSettings.ClockRate = SDIO_CLOCK_FREQUENCY_DEFAULT >> busspeedlow;
+        AR_DEBUG_PRINTF(ATH_DEBUG_WARN,
+                        ("HIF overriding clock to %d \n",busSettings.ClockRate));
+    }
+
+    /* Issue config request to override clock rate */
+    status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_CHANGE_BUS_MODE, &busSettings,
+                               sizeof(SDCONFIG_BUS_MODE_DATA));
+    if (!SDIO_SUCCESS(status)) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                        ("Unable to configure the host clock\n"));
+        return FALSE;
+    } else {
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                        ("Configured clock: %d, Maximum clock: %d\n",
+                        busSettings.ActualClockRate,
+                        SDDEVICE_GET_MAX_CLOCK(handle)));
+    }
+
+    /*
+     * Check if the target supports block mode. This result of this check
+     * can be used to implement the HIFReadWrite API.
+     */
+    if (SDDEVICE_GET_SDIO_FUNC_MAXBLKSIZE(handle)) {
+        /* Limit block size to operational block limit or card function
+           capability */
+        maxBlockSize = min(SDDEVICE_GET_OPER_BLOCK_LEN(handle),
+                           SDDEVICE_GET_SDIO_FUNC_MAXBLKSIZE(handle));
+
+        /* check if the card support multi-block transfers */
+        if (!(SDDEVICE_GET_SDIOCARD_CAPS(handle) & SDIO_CAPS_MULTI_BLOCK)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Byte basis only\n"));
+
+            /* Limit block size to max byte basis */
+            maxBlockSize =  min(maxBlockSize,
+                                (A_UINT16)SDIO_MAX_LENGTH_BYTE_BASIS);
+            maxBlocks = 1;
+        } else {
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Multi-block capable\n"));
+            maxBlocks = SDDEVICE_GET_OPER_BLOCKS(handle);
+            status = SDLIB_SetFunctionBlockSize(handle, HIF_MBOX_BLOCK_SIZE);
+            if (!SDIO_SUCCESS(status)) {
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                                ("Failed to set block size. Err:%d\n", status));
+                return FALSE;
+            }
+        }
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                        ("Bytes Per Block: %d bytes, Block Count:%d \n",
+                        maxBlockSize, maxBlocks));
+    } else {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                        ("Function does not support Block Mode!\n"));
+        return FALSE;
+    }
+
+    /* Allocate the slot current */
+    status = SDLIB_GetDefaultOpCurrent(handle, &slotCurrent.SlotCurrent);
+    if (SDIO_SUCCESS(status)) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Allocating Slot current: %d mA\n",
+                                slotCurrent.SlotCurrent));
+        status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_ALLOC_SLOT_CURRENT,
+                                   &slotCurrent, sizeof(slotCurrent));
+        if (!SDIO_SUCCESS(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                            ("Failed to allocate slot current %d\n", status));
+            return FALSE;
+        }
+    }
+
+    /* Enable the dragon function */
+    count = 0;
+    enabled = FALSE;
+    fData.TimeOut = 1;
+    fData.EnableFlags = SDCONFIG_ENABLE_FUNC;
+    while ((count++ < SDWLAN_ENABLE_DISABLE_TIMEOUT) && !enabled)
+    {
+        /* Enable dragon */
+        status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_ENABLE_DISABLE,
+                                   &fData, sizeof(fData));
+        if (!SDIO_SUCCESS(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                            ("Attempting to enable the card again\n"));
+            continue;
+        }
+
+        /* Mark the status as enabled */
+        enabled = TRUE;
+    }
+
+    /* Check if we were succesful in enabling the target */
+    if (!enabled) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+                        ("Failed to communicate with the target\n"));
+        return FALSE;
+    }
+
+    /* Allocate the bus requests to be used later */
+    A_MEMZERO(busRequest, sizeof(busRequest));
+    for (count = 0; count < BUS_REQUEST_MAX_NUM; count ++) {
+        if ((busRequest[count].request = SDDeviceAllocRequest(handle)) == NULL){
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("Unable to allocate memory\n"));
+            /* TODO: Free the memory that has already been allocated */
+            return FALSE;
+        }
+        hifFreeBusRequest(&busRequest[count]);
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                ("0x%08x = busRequest[%d].request = 0x%08x\n",
+				(unsigned int) &busRequest[count], count,
+				(unsigned int) busRequest[count].request));
+    }
+
+        /* Schedule a worker to handle device inserted, this is a temporary workaround
+         * to fix a deadlock if the device fails to intialize in the insertion handler
+         * The failure causes the instance to shutdown the HIF layer and unregister the
+         * function driver within the busdriver probe context which can deadlock
+         *
+         * NOTE: we cannot use the default work queue because that would block
+         * SD bus request processing for all synchronous I/O. We must use a kernel
+         * thread that is creating using the helper library.
+         * */
+
+    if (SDIO_SUCCESS(SDLIB_OSCreateHelper(&device->insert_helper,
+                         insert_helper_func,
+                         device))) {
+        device->helper_started = TRUE;
+    }
+
+    return TRUE;
+}
+
+static THREAD_RETURN insert_helper_func(POSKERNEL_HELPER pHelper)
+{
+
+    /*
+     * Adding a wait of around a second before we issue the very first
+     * command to dragon. During the process of loading/unloading the
+     * driver repeatedly it was observed that we get a data timeout
+     * while accessing function 1 registers in the chip. The theory at
+     * this point is that some initialization delay in dragon is
+     * causing the SDIO state in dragon core to be not ready even after
+     * the ready bit indicates that function 1 is ready. Accomodating
+     * for this behavior by adding some delay in the driver before it
+     * issues the first command after switching on dragon. Need to
+     * investigate this a bit more - TODO
+     */
+
+    A_MDELAY(1000);
+        /* Inform HTC */
+    if ((htcCallbacks.deviceInsertedHandler(SD_GET_OS_HELPER_CONTEXT(pHelper))) != A_OK) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device rejected\n"));
+    }
+
+    return 0;
+}
+
+void
+HIFAckInterrupt(HIF_DEVICE *device)
+{
+    SDIO_STATUS status;
+    DBG_ASSERT(device != NULL);
+    DBG_ASSERT(device->handle != NULL);
+
+    /* Acknowledge our function IRQ */
+    status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_ACK_IRQ,
+                               NULL, 0);
+    DBG_ASSERT(SDIO_SUCCESS(status));
+}
+
+void
+HIFUnMaskInterrupt(HIF_DEVICE *device)
+{
+    SDIO_STATUS status;
+
+    DBG_ASSERT(device != NULL);
+    DBG_ASSERT(device->handle != NULL);
+
+    /* Register the IRQ Handler */
+    SDDEVICE_SET_IRQ_HANDLER(device->handle, hifIRQHandler, device);
+
+    /* Unmask our function IRQ */
+    status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_UNMASK_IRQ,
+                               NULL, 0);
+    DBG_ASSERT(SDIO_SUCCESS(status));
+}
+
+void HIFMaskInterrupt(HIF_DEVICE *device)
+{
+    SDIO_STATUS status;
+    DBG_ASSERT(device != NULL);
+    DBG_ASSERT(device->handle != NULL);
+
+    /* Mask our function IRQ */
+    status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_MASK_IRQ,
+                               NULL, 0);
+    DBG_ASSERT(SDIO_SUCCESS(status));
+
+    /* Unregister the IRQ Handler */
+    SDDEVICE_SET_IRQ_HANDLER(device->handle, NULL, NULL);
+}
+
+static BUS_REQUEST *hifAllocateBusRequest(void)
+{
+    BUS_REQUEST *busrequest;
+
+    /* Acquire lock */
+    CriticalSectionAcquire(&lock);
+
+    /* Remove first in list */
+    if((busrequest = s_busRequestFreeQueue) != NULL)
+    {
+        s_busRequestFreeQueue = busrequest->next;
+    }
+
+    /* Release lock */
+    CriticalSectionRelease(&lock);
+
+    return busrequest;
+}
+
+static void
+hifFreeBusRequest(BUS_REQUEST *busrequest)
+{
+    DBG_ASSERT(busrequest != NULL);
+
+    /* Acquire lock */
+    CriticalSectionAcquire(&lock);
+
+    /* Insert first in list */
+    busrequest->next = s_busRequestFreeQueue;
+    s_busRequestFreeQueue = busrequest;
+
+    /* Release lock */
+    CriticalSectionRelease(&lock);
+}
+
+void
+hifDeviceRemoved(SDFUNCTION *function, SDDEVICE *handle)
+{
+    A_STATUS status;
+    HIF_DEVICE *device;
+    DBG_ASSERT(function != NULL);
+    DBG_ASSERT(handle != NULL);
+
+    device = getHifDevice(handle);
+    status = htcCallbacks.deviceRemovedHandler(device->htc_handle, A_OK);
+
+        /* cleanup the helper thread */
+    if (device->helper_started) {
+        SDLIB_OSDeleteHelper(&device->insert_helper);
+        device->helper_started = FALSE;
+    }
+
+    delHifDevice(handle);
+    DBG_ASSERT(status == A_OK);
+}
+
+HIF_DEVICE *
+addHifDevice(SDDEVICE *handle)
+{
+    DBG_ASSERT(handle != NULL);
+    hifDevice[0].handle = handle;
+    return &hifDevice[0];
+}
+
+HIF_DEVICE *
+getHifDevice(SDDEVICE *handle)
+{
+    DBG_ASSERT(handle != NULL);
+    return &hifDevice[0];
+}
+
+void
+delHifDevice(SDDEVICE *handle)
+{
+    DBG_ASSERT(handle != NULL);
+    hifDevice[0].handle = NULL;
+}
+
+struct device*
+HIFGetOSDevice(HIF_DEVICE *device)
+{
+    return &device->handle->Device->dev;
+}
+
+static void ResetAllCards(void)
+{
+    UINT8       data;
+    SDIO_STATUS status;
+    int         i;
+
+    data = SDIO_IO_RESET;
+
+    /* set the I/O CARD reset bit:
+     * NOTE: we are exploiting a "feature" of the SDIO core that resets the core when you
+     * set the RES bit in the SDIO_IO_ABORT register.  This bit however "normally" resets the
+     * I/O functions leaving the SDIO core in the same state (as per SDIO spec).
+     * In this design, this reset can be used to reset the SDIO core itself */
+    for (i = 0; i < HIF_MAX_DEVICES; i++) {
+        if (hifDevice[i].handle != NULL) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+                        ("Issuing I/O Card reset for instance: %d \n",i));
+                /* set the I/O Card reset bit */
+            status = SDLIB_IssueCMD52(hifDevice[i].handle,
+                                      0,                    /* function 0 space */
+                                      SDIO_IO_ABORT_REG,
+                                      &data,
+                                      1,                    /* 1 byte */
+                                      TRUE);                /* write */
+        }
+    }
+
+}
+
+void HIFSetHandle(void *hif_handle, void *handle)
+{
+    HIF_DEVICE *device = (HIF_DEVICE *) hif_handle;
+
+    device->htc_handle = handle;
+
+    return;
+}
diff --git a/drivers/ar6000/hif/hif2.c b/drivers/ar6000/hif/hif2.c
new file mode 100644
index 00000000000..386d96e668f
--- /dev/null
+++ b/drivers/ar6000/hif/hif2.c
@@ -0,0 +1,768 @@
+/*
+ * hif2.c - HIF layer re-implementation for the Linux SDIO stack
+ *
+ * Copyright (C) 2008, 2009 by OpenMoko, Inc.
+ * Written by Werner Almesberger <werner@openmoko.org>
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Based on:
+ *
+ * @abstract: HIF layer reference implementation for Atheros SDIO stack
+ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/list.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_ids.h>
+
+#include "athdefs.h"
+#include "a_types.h"
+#include "hif.h"
+
+
+/* @@@ Hack - this wants cleaning up */
+
+#ifdef CONFIG_MACH_NEO1973_GTA02
+
+#include <mach/gta02-pm-wlan.h>
+
+#else /* CONFIG_MACH_NEO1973_GTA02 */
+
+#define	gta02_wlan_query_rfkill_lock()  1
+#define	gta02_wlan_set_rfkill_cb(cb, hif) ((void) cb)
+#define	gta02_wlan_query_rfkill_unlock()
+#define	gta02_wlan_clear_rfkill_cb()
+
+#endif /* !CONFIG_MACH_NEO1973_GTA02 */
+
+
+/*
+ * KNOWN BUGS:
+ *
+ * - HIF_DEVICE_IRQ_ASYNC_SYNC doesn't work yet (gets MMC errors)
+ * - latency can reach hundreds of ms, probably because of scheduling delays
+ * - packets go through about three queues before finally hitting the network
+ */
+
+/*
+ * Differences from Atheros' HIFs:
+ *
+ * - synchronous and asynchronous requests may get reordered with respect to
+ *   each other, e.g., if HIFReadWrite returns for an asynchronous request and
+ *   then HIFReadWrite is called for a synchronous request, the synchronous
+ *   request may be executed before the asynchronous request.
+ *
+ * - request queue locking seems unnecessarily complex in the Atheros HIFs.
+ *
+ * - Atheros mask interrupts by calling sdio_claim_irq/sdio_release_irq, which
+ *   can cause quite a bit of overhead. This HIF has its own light-weight
+ *   interrupt masking.
+ *
+ * - Atheros call deviceInsertedHandler from a thread spawned off the probe or
+ *   device insertion function. The original explanation for the Atheros SDIO
+ *   stack said that this is done because a delay is needed to let the chip
+ *   complete initialization. There is indeed a one second delay in the thread.
+ *
+ *   The Atheros Linux SDIO HIF removes the delay and only retains the thread.
+ *   Experimentally removing the thread didn't show any conflicts, so let's get
+ *   rid of it for good.
+ *
+ * - The Atheros SDIO stack with Samuel's driver sets SDIO_CCCR_POWER in
+ *   SDIO_POWER_EMPC. Atheros' Linux SDIO code apparently doesn't. We don't
+ *   either, and this seems to work fine.
+ *   @@@ Need to check this with Atheros.
+ */
+
+
+#define MBOXES			4
+
+#define HIF_MBOX_BLOCK_SIZE	128
+#define	HIF_MBOX_BASE_ADDR	0x800
+#define	HIF_MBOX_WIDTH		0x800
+#define	HIF_MBOX_START_ADDR(mbox) \
+    (HIF_MBOX_BASE_ADDR+(mbox)*HIF_MBOX_WIDTH)
+
+
+struct hif_device {
+	void *htc_handle;
+	struct sdio_func *func;
+
+	/*
+	 * @@@ our sweet little bit of bogosity - the mechanism that lets us
+	 * use the SDIO stack from softirqs. This really wants to use skbs.
+	 */
+	struct list_head queue;
+	spinlock_t queue_lock;
+	struct task_struct *io_task;
+	wait_queue_head_t wait;
+
+	/*
+	 * activate_lock protects "active" and the activation/deactivation
+	 * process itself.
+	 *
+	 * Relation to other locks: The SDIO function can be claimed while
+	 * activate_lock is being held, but trying to acquire activate_lock
+	 * while having ownership of the SDIO function could cause a deadlock.
+	 */
+	int active;
+	struct mutex activate_lock;
+};
+
+struct hif_request {
+	struct list_head list;
+	struct sdio_func *func;
+	int (*read)(struct sdio_func *func,
+	    void *dst, unsigned int addr, int count);
+	int (*write)(struct sdio_func *func,
+	    unsigned int addr, void *src, int count);
+	void *buf;
+	unsigned long addr;
+	int len;
+	A_STATUS (*completion)(void *context, A_STATUS status);
+	void *context;
+};
+
+
+static HTC_CALLBACKS htcCallbacks;
+
+/*
+ * shutdown_lock prevents recursion through HIFShutDownDevice
+ */
+static DEFINE_MUTEX(shutdown_lock);
+
+
+/* ----- Request processing ------------------------------------------------ */
+
+
+static A_STATUS process_request(struct hif_request *req)
+{
+	int ret;
+	A_STATUS status;
+
+	dev_dbg(&req->func->dev, "process_request(req %p)\n", req);
+	sdio_claim_host(req->func);
+	if (req->read) {
+		ret = req->read(req->func, req->buf, req->addr, req->len);
+	} else {
+		ret = req->write(req->func, req->addr, req->buf, req->len);
+	}
+	sdio_release_host(req->func);
+	status = ret ? A_ERROR : A_OK;
+	if (req->completion)
+		req->completion(req->context, status);
+	kfree(req);
+	return status;
+}
+
+
+static void enqueue_request(struct hif_device *hif, struct hif_request *req)
+{
+	unsigned long flags;
+
+	dev_dbg(&req->func->dev, "enqueue_request(req %p)\n", req);
+	spin_lock_irqsave(&hif->queue_lock, flags);
+	list_add_tail(&req->list, &hif->queue);
+	spin_unlock_irqrestore(&hif->queue_lock, flags);
+	wake_up(&hif->wait);
+}
+
+
+static struct hif_request *dequeue_request(struct hif_device *hif)
+{
+	struct hif_request *req;
+	unsigned long flags;
+
+	spin_lock_irqsave(&hif->queue_lock, flags);
+	if (list_empty(&hif->queue))
+		req = NULL;
+	else {
+		req = list_first_entry(&hif->queue,
+		    struct hif_request, list);
+		list_del(&req->list);
+	}
+	spin_unlock_irqrestore(&hif->queue_lock, flags);
+	return req;
+}
+
+
+static void wait_queue_empty(struct hif_device *hif)
+{
+	unsigned long flags;
+	int empty;
+
+	while (1) {
+		spin_lock_irqsave(&hif->queue_lock, flags);
+		empty = list_empty(&hif->queue);
+		spin_unlock_irqrestore(&hif->queue_lock, flags);
+		if (empty)
+			break;
+		else
+			yield();
+	}
+}
+
+
+static int io(void *data)
+{
+	struct hif_device *hif = data;
+	struct sched_param param = { .sched_priority = 2 };
+		/* one priority level slower than ksdioirqd (which is at 1) */
+	DEFINE_WAIT(wait);
+	struct hif_request *req;
+
+	sched_setscheduler(current, SCHED_FIFO, &param);
+
+	while (1) {
+		while (1) {
+			/*
+			 * Since we never use signals here, one might think
+			 * that this ought to be TASK_UNINTERRUPTIBLE. However,
+			 * such a task would increase the load average and,
+			 * worse, it would trigger the softlockup check.
+			 */
+			prepare_to_wait(&hif->wait, &wait, TASK_INTERRUPTIBLE);
+			if (kthread_should_stop()) {
+				finish_wait(&hif->wait, &wait);
+				return 0;
+			}
+			req = dequeue_request(hif);
+			if (req)
+				break;
+			schedule();
+		}
+		finish_wait(&hif->wait, &wait);
+
+		(void) process_request(req);
+	}
+	return 0;
+}
+
+
+A_STATUS HIFReadWrite(HIF_DEVICE *hif, A_UINT32 address, A_UCHAR *buffer,
+    A_UINT32 length, A_UINT32 request, void *context)
+{
+	struct device *dev = HIFGetOSDevice(hif);
+	struct hif_request *req;
+
+	dev_dbg(dev, "HIFReadWrite(device %p, address 0x%x, buffer %p, "
+	    "length %d, request 0x%x, context %p)\n",
+	    hif, address, buffer, length, request, context);
+
+	BUG_ON(!(request & (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)));
+	BUG_ON(!(request & (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)));
+	BUG_ON(!(request & (HIF_READ | HIF_WRITE)));
+	BUG_ON(!(request & HIF_EXTENDED_IO));
+
+	if (address >= HIF_MBOX_START_ADDR(0) &&
+	    address < HIF_MBOX_START_ADDR(MBOXES+1)) {
+		BUG_ON(length > HIF_MBOX_WIDTH);
+		/* Adjust the address so that the last byte falls on the EOM
+		   address. */
+		address += HIF_MBOX_WIDTH-length;
+	}
+
+	req = kzalloc(sizeof(*req), GFP_ATOMIC);
+	if (!req) {
+		if (request & HIF_ASYNCHRONOUS)
+			htcCallbacks.rwCompletionHandler(context, A_ERROR);
+		return A_ERROR;
+	}
+
+	req->func = hif->func;
+	req->addr = address;
+	req->buf = buffer;
+	req->len = length;
+
+	if (request & HIF_READ) {
+		if (request & HIF_FIXED_ADDRESS)
+			req->read = sdio_readsb;
+		else
+			req->read = sdio_memcpy_fromio;
+	} else {
+		if (request & HIF_FIXED_ADDRESS)
+			req->write = sdio_writesb;
+		else
+			req->write = sdio_memcpy_toio;
+	}
+
+	if (!(request & HIF_ASYNCHRONOUS))
+		return process_request(req);
+
+	req->completion = htcCallbacks.rwCompletionHandler;
+	req->context = context;
+	enqueue_request(hif, req);
+
+	return A_OK;
+}
+
+
+/* ----- Interrupt handling ------------------------------------------------ */
+
+/*
+ * Volatile ought to be good enough to make gcc do the right thing on S3C24xx.
+ * No need to use atomic or put barriers, keeping the code more readable.
+ *
+ * Warning: this story changes if going SMP/SMT.
+ */
+
+static volatile int masked = 1;
+static volatile int pending;
+static volatile int in_interrupt;
+
+
+static void ar6000_do_irq(struct sdio_func *func)
+{
+	HIF_DEVICE *hif = sdio_get_drvdata(func);
+	struct device *dev = HIFGetOSDevice(hif);
+	A_STATUS status;
+
+	dev_dbg(dev, "ar6000_do_irq -> %p\n", htcCallbacks.dsrHandler);
+
+	status = htcCallbacks.dsrHandler(hif->htc_handle);
+	BUG_ON(status != A_OK);
+}
+
+
+static void sdio_ar6000_irq(struct sdio_func *func)
+{
+	HIF_DEVICE *hif = sdio_get_drvdata(func);
+	struct device *dev = HIFGetOSDevice(hif);
+
+	dev_dbg(dev, "sdio_ar6000_irq\n");
+
+	in_interrupt = 1;
+	if (masked) {
+		in_interrupt = 0;
+		pending++;
+		return;
+	}
+	/*
+	 * @@@ This is ugly. If we don't drop the lock, we'll deadlock when
+	 * the handler tries to do SDIO. So there are four choices:
+	 *
+	 * 1) Break the call chain by calling the callback from a workqueue.
+	 *    Ugh.
+	 * 2) Make process_request aware that we already have the lock.
+	 * 3) Drop the lock. Which is ugly but should be safe as long as we're
+	 *    making sure the device doesn't go away.
+	 * 4) Change the AR6k driver such that it only issues asynchronous
+	 *    quests when called from an interrupt.
+	 *
+	 * Solution 2) is probably the best for now. Will try it later.
+	 */
+	sdio_release_host(func);
+	ar6000_do_irq(func);
+	sdio_claim_host(func);
+	in_interrupt = 0;
+}
+
+
+void HIFAckInterrupt(HIF_DEVICE *hif)
+{
+	struct device *dev = HIFGetOSDevice(hif);
+
+	dev_dbg(dev, "HIFAckInterrupt\n");
+	/* do nothing */
+}
+
+
+void HIFUnMaskInterrupt(HIF_DEVICE *hif)
+{
+	struct device *dev = HIFGetOSDevice(hif);
+
+	dev_dbg(dev, "HIFUnMaskInterrupt\n");
+	do {
+		masked = 1;
+		if (pending) {
+			pending = 0;
+			ar6000_do_irq(hif->func);
+			/* We may take an interrupt before unmasking and thus
+			   get it pending. In this case, we just loop back. */
+		}
+		masked = 0;
+	}
+	while (pending);
+}
+
+
+void HIFMaskInterrupt(HIF_DEVICE *hif)
+{
+	struct device *dev = HIFGetOSDevice(hif);
+
+	dev_dbg(dev, "HIFMaskInterrupt\n");
+	/*
+	 * Since sdio_ar6000_irq can also be called from a process context, we
+	 * may conceivably end up racing with it. Thus, we need to wait until
+	 * we can be sure that no concurrent interrupt processing is going on
+	 * before we return.
+	 *
+	 * Note: this may be a bit on the paranoid side - the callers may
+	 * actually be nice enough to disable scheduling. Check later.
+	 */
+	masked = 1;
+	while (in_interrupt)
+		yield();
+}
+
+
+/* ----- HIF API glue functions -------------------------------------------- */
+
+
+struct device *HIFGetOSDevice(HIF_DEVICE *hif)
+{
+	return &hif->func->dev;
+}
+
+
+void HIFSetHandle(void *hif_handle, void *handle)
+{
+	HIF_DEVICE *hif = (HIF_DEVICE *) hif_handle;
+
+	hif->htc_handle = handle;
+}
+
+
+/* ----- Device configuration (HIF side) ----------------------------------- */
+
+
+A_STATUS HIFConfigureDevice(HIF_DEVICE *hif,
+    HIF_DEVICE_CONFIG_OPCODE opcode, void *config, A_UINT32 configLen)
+{
+	struct device *dev = HIFGetOSDevice(hif);
+	HIF_DEVICE_IRQ_PROCESSING_MODE *ipm_cfg = config;
+	A_UINT32 *mbs_cfg = config;
+	int i;
+
+	dev_dbg(dev, "HIFConfigureDevice\n");
+
+	switch (opcode) {
+	case HIF_DEVICE_GET_MBOX_BLOCK_SIZE:
+		for (i = 0; i != MBOXES; i++)
+			mbs_cfg[i] = HIF_MBOX_BLOCK_SIZE;
+		break;
+	case HIF_DEVICE_GET_MBOX_ADDR:
+		for (i = 0; i != MBOXES; i++)
+			mbs_cfg[i] = HIF_MBOX_START_ADDR(i);
+		break;
+	case HIF_DEVICE_GET_IRQ_PROC_MODE:
+		*ipm_cfg = HIF_DEVICE_IRQ_SYNC_ONLY;
+//		*ipm_cfg = HIF_DEVICE_IRQ_ASYNC_SYNC;
+		break;
+	default:
+		return A_ERROR;
+	}
+	return A_OK;
+}
+
+
+/* ----- Device probe and removal (Linux side) ----------------------------- */
+
+
+static int ar6000_do_activate(struct hif_device *hif)
+{
+	struct sdio_func *func = hif->func;
+	struct device *dev = &func->dev;
+	int ret;
+
+	dev_dbg(dev, "ar6000_do_activate\n");
+
+	sdio_claim_host(func);
+	sdio_enable_func(func);
+
+	INIT_LIST_HEAD(&hif->queue);
+	init_waitqueue_head(&hif->wait);
+	spin_lock_init(&hif->queue_lock);
+
+	ret = sdio_set_block_size(func, HIF_MBOX_BLOCK_SIZE);
+	if (ret < 0) {
+		dev_err(dev, "sdio_set_block_size returns %d\n", ret);
+		goto out_enabled;
+	}
+	ret = sdio_claim_irq(func, sdio_ar6000_irq);
+	if (ret) {
+		dev_err(dev, "sdio_claim_irq returns %d\n", ret);
+		goto out_enabled;
+	}
+	/* Set SDIO_BUS_CD_DISABLE in SDIO_CCCR_IF ? */
+#if 0
+	sdio_f0_writeb(func, SDIO_CCCR_CAP_E4MI, SDIO_CCCR_CAPS, &ret);
+	if (ret) {
+		dev_err(dev, "sdio_f0_writeb(SDIO_CCCR_CAPS) returns %d\n",
+		    ret);
+		goto out_got_irq;
+	}
+#else
+	if (0) /* avoid warning */
+		goto out_got_irq;
+#endif
+
+	sdio_release_host(func);
+
+	hif->io_task = kthread_run(io, hif, "ar6000_io");
+	ret = IS_ERR(hif->io_task);
+	if (ret) {
+		dev_err(dev, "kthread_run(ar6000_io): %d\n", ret);
+		goto out_func_ready;
+	}
+
+	ret = htcCallbacks.deviceInsertedHandler(hif);
+	if (ret == A_OK)
+		return 0;
+
+	dev_err(dev, "deviceInsertedHandler: %d\n", ret);
+
+	ret = kthread_stop(hif->io_task);
+	if (ret)
+		dev_err(dev, "kthread_stop (ar6000_io): %d\n", ret);
+
+out_func_ready:
+	sdio_claim_host(func);
+
+out_got_irq:
+	sdio_release_irq(func);
+
+out_enabled:
+	sdio_disable_func(func);
+	sdio_release_host(func);
+
+	return ret;
+}
+
+
+static void ar6000_do_deactivate(struct hif_device *hif)
+{
+	struct sdio_func *func = hif->func;
+	struct device *dev = &func->dev;
+	int ret;
+
+	dev_dbg(dev, "ar6000_do_deactivate\n");
+	if (!hif->active)
+		return;
+
+	if (mutex_trylock(&shutdown_lock)) {
+		/*
+		 * Funny, Atheros' HIF does this call, but this just puts us in
+		 * a recursion through HTCShutDown/HIFShutDown if unloading the
+		 * module.
+		 *
+		 * However, we need it for suspend/resume. See the comment at
+		 * HIFShutDown, below.
+		 */
+		ret = htcCallbacks.deviceRemovedHandler(hif->htc_handle, A_OK);
+		if (ret != A_OK)
+			dev_err(dev, "deviceRemovedHandler: %d\n", ret);
+		mutex_unlock(&shutdown_lock);
+	}
+	wait_queue_empty(hif);
+	ret = kthread_stop(hif->io_task);
+	if (ret)
+		dev_err(dev, "kthread_stop (ar6000_io): %d\n", ret);
+	sdio_claim_host(func);
+	sdio_release_irq(func);
+	sdio_disable_func(func);
+	sdio_release_host(func);
+}
+
+
+static int ar6000_activate(struct hif_device *hif)
+{
+	int ret = 0;
+
+	dev_dbg(&hif->func->dev, "ar6000_activate\n");
+	mutex_lock(&hif->activate_lock);
+	if (!hif->active) {
+		ret = ar6000_do_activate(hif);
+		if (ret) {
+			printk(KERN_ERR "%s: Failed to activate %d\n",
+				__func__, ret);
+			goto out;
+		}
+		hif->active = 1;
+	}
+out:
+	mutex_unlock(&hif->activate_lock);
+	return ret;
+}
+
+
+static void ar6000_deactivate(struct hif_device *hif)
+{
+	dev_dbg(&hif->func->dev, "ar6000_deactivate\n");
+	mutex_lock(&hif->activate_lock);
+	if (hif->active) {
+		ar6000_do_deactivate(hif);
+		hif->active = 0;
+	}
+	mutex_unlock(&hif->activate_lock);
+}
+
+
+static int ar6000_rfkill_cb(void *data, int on)
+{
+	struct hif_device *hif = data;
+	struct sdio_func *func = hif->func;
+	struct device *dev = &func->dev;
+
+	dev_dbg(dev, "ar6000_rfkill_cb: on %d\n", on);
+	if (on)
+		return ar6000_activate(hif);
+	ar6000_deactivate(hif);
+	return 0;
+}
+
+
+static int sdio_ar6000_probe(struct sdio_func *func,
+    const struct sdio_device_id *id)
+{
+	struct device *dev = &func->dev;
+	struct hif_device *hif;
+	int ret = 0;
+
+	dev_dbg(dev, "sdio_ar6000_probe\n");
+	BUG_ON(!htcCallbacks.deviceInsertedHandler);
+
+	hif = kzalloc(sizeof(*hif), GFP_KERNEL);
+	if (!hif)
+		return -ENOMEM;
+
+	sdio_set_drvdata(func, hif);
+	hif->func = func;
+	mutex_init(&hif->activate_lock);
+	hif->active = 0;
+
+	if (gta02_wlan_query_rfkill_lock())
+		ret = ar6000_activate(hif);
+	if (!ret) {
+		gta02_wlan_set_rfkill_cb(ar6000_rfkill_cb, hif);
+		return 0;
+	}
+	gta02_wlan_query_rfkill_unlock();
+	sdio_set_drvdata(func, NULL);
+	kfree(hif);
+	return ret;
+}
+
+
+static void sdio_ar6000_remove(struct sdio_func *func)
+{
+	struct device *dev = &func->dev;
+	HIF_DEVICE *hif = sdio_get_drvdata(func);
+
+	dev_dbg(dev, "sdio_ar6000_remove\n");
+	gta02_wlan_clear_rfkill_cb();
+	ar6000_deactivate(hif);
+	sdio_set_drvdata(func, NULL);
+	kfree(hif);
+}
+
+
+/* ----- Device registration/unregistration (called by HIF) ---------------- */
+
+
+#define ATHEROS_SDIO_DEVICE(id, offset) \
+    SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_##id | (offset))
+
+static const struct sdio_device_id sdio_ar6000_ids[] = {
+	{ ATHEROS_SDIO_DEVICE(AR6002, 0)	},
+	{ ATHEROS_SDIO_DEVICE(AR6002, 0x1)	},
+	{ ATHEROS_SDIO_DEVICE(AR6001, 0x8)	},
+	{ ATHEROS_SDIO_DEVICE(AR6001, 0x9)	},
+	{ ATHEROS_SDIO_DEVICE(AR6001, 0xa)	},
+	{ ATHEROS_SDIO_DEVICE(AR6001, 0xb)	},
+	{ /* end: all zeroes */			},
+};
+
+MODULE_DEVICE_TABLE(sdio, sdio_ar6000_ids);
+
+
+static struct sdio_driver sdio_ar6000_driver = {
+	.probe		= sdio_ar6000_probe,
+	.remove		= sdio_ar6000_remove,
+	.name		= "sdio_ar6000",
+	.id_table	= sdio_ar6000_ids,
+};
+
+
+int HIFInit(HTC_CALLBACKS *callbacks)
+{
+	int ret;
+
+	BUG_ON(!callbacks);
+
+	printk(KERN_DEBUG "HIFInit\n");
+	htcCallbacks = *callbacks;
+
+	ret = sdio_register_driver(&sdio_ar6000_driver);
+	if (ret) {
+		printk(KERN_ERR
+		    "sdio_register_driver(sdio_ar6000_driver): %d\n", ret);
+		return A_ERROR;
+	}
+
+	return 0;
+}
+
+
+/*
+ * We have four possible call chains here:
+ *
+ * System shutdown/reboot:
+ *
+ *   kernel_restart_prepare ...> device_shutdown ... > s3cmci_shutdown ->
+ *     mmc_remove_host ..> sdio_bus_remove -> sdio_ar6000_remove ->
+ *     ar6000_deactivate -> ar6000_do_deactivate ->
+ *     deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
+ *
+ *   This is roughly the same sequence as suspend, described below.
+ *
+ * Module removal:
+ *
+ *   sys_delete_module -> ar6000_cleanup_module -> HTCShutDown ->
+ *     HIFShutDownDevice -> sdio_unregister_driver ...> sdio_bus_remove ->
+ *     sdio_ar6000_remove -> ar6000_deactivate -> ar6000_do_deactivate
+ *
+ *   In this case, HIFShutDownDevice must call sdio_unregister_driver to
+ *   notify the driver about its removal. ar6000_do_deactivate must not call
+ *   deviceRemovedHandler, because that would loop back into HIFShutDownDevice.
+ *
+ * Suspend:
+ *
+ *   device_suspend ...> s3cmci_suspend ...> sdio_bus_remove ->
+ *     sdio_ar6000_remove -> ar6000_deactivate -> ar6000_do_deactivate ->
+ *     deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
+ *
+ *   We must call deviceRemovedHandler to inform the ar6k stack that the device
+ *   has been removed. Since HTCTargetRemovedHandler calls back into
+ *   HIFShutDownDevice, we must also prevent the call to
+ *   sdio_unregister_driver, or we'd end up recursing into the SDIO stack,
+ *   eventually deadlocking somewhere.
+ *
+ * rfkill:
+ *
+ *   rfkill_state_store -> rfkill_toggle_radio -> gta02_wlan_toggle_radio ->
+ *   ar6000_rfkill_cb -> ar6000_deactivate -> ar6000_do_deactivate ->
+ *     deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
+ *
+ *   This is similar to suspend - only the entry point changes.
+ */
+
+void HIFShutDownDevice(HIF_DEVICE *hif)
+{
+	/* Beware, HTCShutDown calls us with hif == NULL ! */
+	if (mutex_trylock(&shutdown_lock)) {
+		sdio_unregister_driver(&sdio_ar6000_driver);
+		mutex_unlock(&shutdown_lock);
+	}
+}
diff --git a/drivers/ar6000/hif/hif_internal.h b/drivers/ar6000/hif/hif_internal.h
new file mode 100644
index 00000000000..d8fc1013234
--- /dev/null
+++ b/drivers/ar6000/hif/hif_internal.h
@@ -0,0 +1,102 @@
+/*
+ * @file: hif_internal.h
+ *
+ * @abstract: internal header file for hif layer
+ *
+ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include <linux/sdio/ctsystem.h>
+#include <linux/sdio/sdio_busdriver.h>
+#include <linux/sdio/_sdio_defs.h>
+#include <linux/sdio/sdio_lib.h>
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "hif.h"
+
+#define MANUFACTURER_ID_AR6001_BASE        0x100
+#define MANUFACTURER_ID_AR6002_BASE        0x200
+#define FUNCTION_CLASS                     0x0
+#define MANUFACTURER_CODE                  0x271
+
+#define BUS_REQUEST_MAX_NUM                64
+
+#define SDIO_CLOCK_FREQUENCY_DEFAULT       25000000
+#define SDWLAN_ENABLE_DISABLE_TIMEOUT      20
+#define FLAGS_CARD_ENAB                    0x02
+#define FLAGS_CARD_IRQ_UNMSK               0x04
+
+#define HIF_MBOX_BLOCK_SIZE                128
+#define HIF_MBOX_BASE_ADDR                 0x800
+#define HIF_MBOX_WIDTH                     0x800
+#define HIF_MBOX0_BLOCK_SIZE               1
+#define HIF_MBOX1_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
+#define HIF_MBOX2_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
+#define HIF_MBOX3_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
+
+#define HIF_MBOX_START_ADDR(mbox)                        \
+    HIF_MBOX_BASE_ADDR + mbox * HIF_MBOX_WIDTH
+
+#define HIF_MBOX_END_ADDR(mbox)	                         \
+    HIF_MBOX_START_ADDR(mbox) + HIF_MBOX_WIDTH - 1
+
+struct hif_device {
+    SDDEVICE *handle;
+    void *htc_handle;
+    OSKERNEL_HELPER insert_helper;
+    BOOL  helper_started;
+};
+
+typedef struct target_function_context {
+    SDFUNCTION           function; /* function description of the bus driver */
+    OS_SEMAPHORE         instanceSem; /* instance lock. Unused */
+    SDLIST               instanceList; /* list of instances. Unused */
+} TARGET_FUNCTION_CONTEXT;
+
+typedef struct bus_request {
+    struct bus_request *next;
+    SDREQUEST *request;
+    void *context;
+} BUS_REQUEST;
+
+BOOL
+hifDeviceInserted(SDFUNCTION *function, SDDEVICE *device);
+
+void
+hifDeviceRemoved(SDFUNCTION *function, SDDEVICE *device);
+
+SDREQUEST *
+hifAllocateDeviceRequest(SDDEVICE *device);
+
+void
+hifFreeDeviceRequest(SDREQUEST *request);
+
+void
+hifRWCompletionHandler(SDREQUEST *request);
+
+void
+hifIRQHandler(void *context);
+
+HIF_DEVICE *
+addHifDevice(SDDEVICE *handle);
+
+HIF_DEVICE *
+getHifDevice(SDDEVICE *handle);
+
+void
+delHifDevice(SDDEVICE *handle);
diff --git a/drivers/ar6000/htc/ar6k.c b/drivers/ar6000/htc/ar6k.c
new file mode 100644
index 00000000000..72472abb0d8
--- /dev/null
+++ b/drivers/ar6000/htc/ar6k.c
@@ -0,0 +1,991 @@
+/*
+ * AR6K device layer that handles register level I/O
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "AR6Khwreg.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "hif.h"
+#include "htc_packet.h"
+#include "ar6k.h"
+
+#define MAILBOX_FOR_BLOCK_SIZE 1
+
+extern A_UINT32 resetok;
+
+static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev);
+static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev);
+
+#define LOCK_AR6K(p)      A_MUTEX_LOCK(&(p)->Lock);
+#define UNLOCK_AR6K(p)    A_MUTEX_UNLOCK(&(p)->Lock);
+
+void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket)
+{
+    LOCK_AR6K(pDev);
+    HTC_PACKET_ENQUEUE(&pDev->RegisterIOList,pPacket);
+    UNLOCK_AR6K(pDev);
+}
+
+HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev)
+{
+    HTC_PACKET *pPacket;
+
+    LOCK_AR6K(pDev);
+    pPacket = HTC_PACKET_DEQUEUE(&pDev->RegisterIOList);
+    UNLOCK_AR6K(pDev);
+
+    return pPacket;
+}
+
+A_STATUS DevSetup(AR6K_DEVICE *pDev)
+{
+    A_UINT32 mailboxaddrs[AR6K_MAILBOXES];
+    A_UINT32 blocksizes[AR6K_MAILBOXES];
+    A_STATUS status = A_OK;
+    int      i;
+
+    AR_DEBUG_ASSERT(AR6K_IRQ_PROC_REGS_SIZE == 16);
+    AR_DEBUG_ASSERT(AR6K_IRQ_ENABLE_REGS_SIZE == 4);
+
+    do {
+            /* give a handle to HIF for this target */
+        HIFSetHandle(pDev->HIFDevice, (void *)pDev);
+            /* initialize our free list of IO packets */
+        INIT_HTC_PACKET_QUEUE(&pDev->RegisterIOList);
+        A_MUTEX_INIT(&pDev->Lock);
+
+            /* get the addresses for all 4 mailboxes */
+        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
+                                    mailboxaddrs, sizeof(mailboxaddrs));
+
+        if (status != A_OK) {
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+            /* carve up register I/O packets (these are for ASYNC register I/O ) */
+        for (i = 0; i < AR6K_MAX_REG_IO_BUFFERS; i++) {
+            HTC_PACKET *pIOPacket;
+            pIOPacket = &pDev->RegIOBuffers[i].HtcPacket;
+            SET_HTC_PACKET_INFO_RX_REFILL(pIOPacket,
+                                          pDev,
+                                          pDev->RegIOBuffers[i].Buffer,
+                                          AR6K_REG_IO_BUFFER_SIZE,
+                                          0); /* don't care */
+            AR6KFreeIOPacket(pDev,pIOPacket);
+        }
+
+            /* get the address of the mailbox we are using */
+        pDev->MailboxAddress = mailboxaddrs[HTC_MAILBOX];
+
+            /* get the block sizes */
+        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
+                                    blocksizes, sizeof(blocksizes));
+
+        if (status != A_OK) {
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+            /* note: we actually get the block size of a mailbox other than 0, for SDIO the block
+             * size on mailbox 0 is artificially set to 1.  So we use the block size that is set
+             * for the other 3 mailboxes */
+        pDev->BlockSize = blocksizes[MAILBOX_FOR_BLOCK_SIZE];
+            /* must be a power of 2 */
+        AR_DEBUG_ASSERT((pDev->BlockSize & (pDev->BlockSize - 1)) == 0);
+
+            /* assemble mask, used for padding to a block */
+        pDev->BlockMask = pDev->BlockSize - 1;
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("BlockSize: %d, MailboxAddress:0x%X \n",
+                    pDev->BlockSize, pDev->MailboxAddress));
+
+        pDev->GetPendingEventsFunc = NULL;
+            /* see if the HIF layer implements the get pending events function  */
+        HIFConfigureDevice(pDev->HIFDevice,
+                           HIF_DEVICE_GET_PENDING_EVENTS_FUNC,
+                           &pDev->GetPendingEventsFunc,
+                           sizeof(pDev->GetPendingEventsFunc));
+
+            /* assume we can process HIF interrupt events asynchronously */
+        pDev->HifIRQProcessingMode = HIF_DEVICE_IRQ_ASYNC_SYNC;
+
+            /* see if the HIF layer overrides this assumption */
+        HIFConfigureDevice(pDev->HIFDevice,
+                           HIF_DEVICE_GET_IRQ_PROC_MODE,
+                           &pDev->HifIRQProcessingMode,
+                           sizeof(pDev->HifIRQProcessingMode));
+
+        switch (pDev->HifIRQProcessingMode) {
+            case HIF_DEVICE_IRQ_SYNC_ONLY:
+                AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is SYNC ONLY\n"));
+                break;
+            case HIF_DEVICE_IRQ_ASYNC_SYNC:
+                AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is ASYNC and SYNC\n"));
+                break;
+            default:
+                AR_DEBUG_ASSERT(FALSE);
+        }
+
+        pDev->HifMaskUmaskRecvEvent = NULL;
+
+            /* see if the HIF layer implements the mask/unmask recv events function  */
+        HIFConfigureDevice(pDev->HIFDevice,
+                           HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC,
+                           &pDev->HifMaskUmaskRecvEvent,
+                           sizeof(pDev->HifMaskUmaskRecvEvent));
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF special overrides : 0x%X , 0x%X\n",
+                 (A_UINT32)pDev->GetPendingEventsFunc, (A_UINT32)pDev->HifMaskUmaskRecvEvent));
+
+        status = DevDisableInterrupts(pDev);
+
+    } while (FALSE);
+
+    if (A_FAILED(status)) {
+            /* make sure handle is cleared */
+        HIFSetHandle(pDev->HIFDevice, NULL);
+    }
+
+    return status;
+
+}
+
+static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev)
+{
+    A_STATUS                  status;
+    AR6K_IRQ_ENABLE_REGISTERS regs;
+
+    LOCK_AR6K(pDev);
+
+        /* Enable all the interrupts except for the dragon interrupt */
+    pDev->IrqEnableRegisters.int_status_enable = INT_STATUS_ENABLE_ERROR_SET(0x01) |
+                                      INT_STATUS_ENABLE_CPU_SET(0x01) |
+                                      INT_STATUS_ENABLE_COUNTER_SET(0x01);
+
+    if (NULL == pDev->GetPendingEventsFunc) {
+        pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+    } else {
+        /* The HIF layer provided us with a pending events function which means that
+         * the detection of pending mbox messages is handled in the HIF layer.
+         * This is the case for the SPI2 interface.
+         * In the normal case we enable MBOX interrupts, for the case
+         * with HIFs that offer this mechanism, we keep these interrupts
+         * masked */
+        pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+    }
+
+
+    /* Set up the CPU Interrupt Status Register */
+    pDev->IrqEnableRegisters.cpu_int_status_enable = CPU_INT_STATUS_ENABLE_BIT_SET(0x00);
+
+    /* Set up the Error Interrupt Status Register */
+    pDev->IrqEnableRegisters.error_status_enable =
+                                  ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(0x01) |
+                                  ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(0x01);
+
+    /* Set up the Counter Interrupt Status Register (only for debug interrupt to catch fatal errors) */
+    pDev->IrqEnableRegisters.counter_int_status_enable =
+        COUNTER_INT_STATUS_ENABLE_BIT_SET(AR6K_TARGET_DEBUG_INTR_MASK);
+
+        /* copy into our temp area */
+    A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
+
+    UNLOCK_AR6K(pDev);
+
+        /* always synchronous */
+    status = HIFReadWrite(pDev->HIFDevice,
+                          INT_STATUS_ENABLE_ADDRESS,
+                          &regs.int_status_enable,
+                          AR6K_IRQ_ENABLE_REGS_SIZE,
+                          HIF_WR_SYNC_BYTE_INC,
+                          NULL);
+
+    if (status != A_OK) {
+        /* Can't write it for some reason */
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                        ("Failed to update interrupt control registers err: %d\n", status));
+
+    }
+
+    return status;
+}
+
+static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev)
+{
+    AR6K_IRQ_ENABLE_REGISTERS regs;
+
+    LOCK_AR6K(pDev);
+        /* Disable all interrupts */
+    pDev->IrqEnableRegisters.int_status_enable = 0;
+    pDev->IrqEnableRegisters.cpu_int_status_enable = 0;
+    pDev->IrqEnableRegisters.error_status_enable = 0;
+    pDev->IrqEnableRegisters.counter_int_status_enable = 0;
+        /* copy into our temp area */
+    A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
+
+    UNLOCK_AR6K(pDev);
+
+        /* always synchronous */
+    return HIFReadWrite(pDev->HIFDevice,
+                        INT_STATUS_ENABLE_ADDRESS,
+                        &regs.int_status_enable,
+                        AR6K_IRQ_ENABLE_REGS_SIZE,
+                        HIF_WR_SYNC_BYTE_INC,
+                        NULL);
+}
+
+/* enable device interrupts */
+A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev)
+{
+        /* Unmask the host controller interrupts */
+    HIFUnMaskInterrupt(pDev->HIFDevice);
+
+    return DevEnableInterrupts(pDev);
+}
+
+/* disable all device interrupts */
+A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev)
+{
+    A_STATUS status;
+
+    status = DevDisableInterrupts(pDev);
+
+    if (A_SUCCESS(status)) {
+            /* Disable the interrupt at the HIF layer */
+        HIFMaskInterrupt(pDev->HIFDevice);
+    }
+
+    return status;
+}
+
+/* callback when our fetch to enable/disable completes */
+static void DevDoEnableDisableRecvAsyncHandler(void *Context, HTC_PACKET *pPacket)
+{
+    AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDoEnableDisableRecvAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+    if (A_FAILED(pPacket->Status)) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                (" Failed to disable receiver, status:%d \n", pPacket->Status));
+    }
+        /* free this IO packet */
+    AR6KFreeIOPacket(pDev,pPacket);
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDoEnableDisableRecvAsyncHandler \n"));
+}
+
+/* disable packet reception (used in case the host runs out of buffers)
+ * this is the "override" method when the HIF reports another methods to
+ * disable recv events */
+static A_STATUS DevDoEnableDisableRecvOverride(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
+{
+    A_STATUS                  status = A_OK;
+    HTC_PACKET                *pIOPacket = NULL;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("DevDoEnableDisableRecvOverride: Enable:%d Mode:%d\n",
+            EnableRecv,AsyncMode));
+
+    do {
+
+        if (AsyncMode) {
+
+            pIOPacket = AR6KAllocIOPacket(pDev);
+
+            if (NULL == pIOPacket) {
+                status = A_NO_MEMORY;
+                AR_DEBUG_ASSERT(FALSE);
+                break;
+            }
+
+                /* stick in our completion routine when the I/O operation completes */
+            pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
+            pIOPacket->pContext = pDev;
+
+                /* call the HIF layer override and do this asynchronously */
+            status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
+                                                 EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
+                                                 pIOPacket);
+            break;
+        }
+
+            /* if we get here we are doing it synchronously */
+        status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
+                                             EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
+                                             NULL);
+
+    } while (FALSE);
+
+    if (A_FAILED(status) && (pIOPacket != NULL)) {
+        AR6KFreeIOPacket(pDev,pIOPacket);
+    }
+
+    return status;
+}
+
+/* disable packet reception (used in case the host runs out of buffers)
+ * this is the "normal" method using the interrupt enable registers through
+ * the host I/F */
+static A_STATUS DevDoEnableDisableRecvNormal(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
+{
+    A_STATUS                  status = A_OK;
+    HTC_PACKET                *pIOPacket = NULL;
+    AR6K_IRQ_ENABLE_REGISTERS regs;
+
+        /* take the lock to protect interrupt enable shadows */
+    LOCK_AR6K(pDev);
+
+    if (EnableRecv) {
+        pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+    } else {
+        pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+    }
+
+        /* copy into our temp area */
+    A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
+    UNLOCK_AR6K(pDev);
+
+    do {
+
+        if (AsyncMode) {
+
+            pIOPacket = AR6KAllocIOPacket(pDev);
+
+            if (NULL == pIOPacket) {
+                status = A_NO_MEMORY;
+                AR_DEBUG_ASSERT(FALSE);
+                break;
+            }
+
+                /* copy values to write to our async I/O buffer */
+            A_MEMCPY(pIOPacket->pBuffer,&regs,AR6K_IRQ_ENABLE_REGS_SIZE);
+
+                /* stick in our completion routine when the I/O operation completes */
+            pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
+            pIOPacket->pContext = pDev;
+
+                /* write it out asynchronously */
+            HIFReadWrite(pDev->HIFDevice,
+                         INT_STATUS_ENABLE_ADDRESS,
+                         pIOPacket->pBuffer,
+                         AR6K_IRQ_ENABLE_REGS_SIZE,
+                         HIF_WR_ASYNC_BYTE_INC,
+                         pIOPacket);
+            break;
+        }
+
+        /* if we get here we are doing it synchronously */
+
+        status = HIFReadWrite(pDev->HIFDevice,
+                              INT_STATUS_ENABLE_ADDRESS,
+                              &regs.int_status_enable,
+                              AR6K_IRQ_ENABLE_REGS_SIZE,
+                              HIF_WR_SYNC_BYTE_INC,
+                              NULL);
+
+    } while (FALSE);
+
+    if (A_FAILED(status) && (pIOPacket != NULL)) {
+        AR6KFreeIOPacket(pDev,pIOPacket);
+    }
+
+    return status;
+}
+
+
+A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode)
+{
+    if (NULL == pDev->HifMaskUmaskRecvEvent) {
+        return DevDoEnableDisableRecvNormal(pDev,FALSE,AsyncMode);
+    } else {
+        return DevDoEnableDisableRecvOverride(pDev,FALSE,AsyncMode);
+    }
+}
+
+A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode)
+{
+    if (NULL == pDev->HifMaskUmaskRecvEvent) {
+        return DevDoEnableDisableRecvNormal(pDev,TRUE,AsyncMode);
+    } else {
+        return DevDoEnableDisableRecvOverride(pDev,TRUE,AsyncMode);
+    }
+}
+
+void DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS   *pIrqProcRegs,
+                      AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs)
+{
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("\n<------- Register Table -------->\n"));
+
+    if (pIrqProcRegs != NULL) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Int Status:               0x%x\n",pIrqProcRegs->host_int_status));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("CPU Int Status:            0x%x\n",pIrqProcRegs->cpu_int_status));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Error Int Status:          0x%x\n",pIrqProcRegs->error_int_status));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Counter Int Status:        0x%x\n",pIrqProcRegs->counter_int_status));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Mbox Frame:                0x%x\n",pIrqProcRegs->mbox_frame));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Rx Lookahead Valid:        0x%x\n",pIrqProcRegs->rx_lookahead_valid));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Rx Lookahead 0:            0x%x\n",pIrqProcRegs->rx_lookahead[0]));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Rx Lookahead 1:            0x%x\n",pIrqProcRegs->rx_lookahead[1]));
+    }
+
+    if (pIrqEnableRegs != NULL) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Int Status Enable:         0x%x\n",pIrqEnableRegs->int_status_enable));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+            ("Counter Int Status Enable: 0x%x\n",pIrqEnableRegs->counter_int_status_enable));
+        AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("<------------------------------->\n"));
+    }
+}
+
+
+#ifdef MBOXHW_UNIT_TEST
+
+
+/* This is a mailbox hardware unit test that must be called in a schedulable context
+ * This test is very simple, it will send a list of buffers with a counting pattern
+ * and the target will invert the data and send the message back
+ *
+ * the unit test has the following constraints:
+ *
+ * The target has at least 8 buffers of 256 bytes each. The host will send
+ * the following pattern of buffers in rapid succession :
+ *
+ * 1 buffer - 128 bytes
+ * 1 buffer - 256 bytes
+ * 1 buffer - 512 bytes
+ * 1 buffer - 1024 bytes
+ *
+ * The host will send the buffers to one mailbox and wait for buffers to be reflected
+ * back from the same mailbox. The target sends the buffers FIFO order.
+ * Once the final buffer has been received for a mailbox, the next mailbox is tested.
+ *
+ *
+ * Note:  To simplifythe test , we assume that the chosen buffer sizes
+ *        will fall on a nice block pad
+ *
+ * It is expected that higher-order tests will be written to stress the mailboxes using
+ * a message-based protocol (with some performance timming) that can create more
+ * randomness in the packets sent over mailboxes.
+ *
+ * */
+
+#define A_ROUND_UP_PWR2(x, align)    (((int) (x) + ((align)-1)) & ~((align)-1))
+
+#define BUFFER_BLOCK_PAD 128
+
+#if 0
+#define BUFFER1 128
+#define BUFFER2 256
+#define BUFFER3 512
+#define BUFFER4 1024
+#endif
+
+#if 1
+#define BUFFER1 80
+#define BUFFER2 200
+#define BUFFER3 444
+#define BUFFER4 800
+#endif
+
+#define TOTAL_BYTES (A_ROUND_UP_PWR2(BUFFER1,BUFFER_BLOCK_PAD) + \
+                     A_ROUND_UP_PWR2(BUFFER2,BUFFER_BLOCK_PAD) + \
+                     A_ROUND_UP_PWR2(BUFFER3,BUFFER_BLOCK_PAD) + \
+                     A_ROUND_UP_PWR2(BUFFER4,BUFFER_BLOCK_PAD) )
+
+#define TEST_BYTES (BUFFER1 +  BUFFER2 + BUFFER3 + BUFFER4)
+
+#define TEST_CREDITS_RECV_TIMEOUT 100
+
+static A_UINT8  g_Buffer[TOTAL_BYTES];
+static A_UINT32 g_MailboxAddrs[AR6K_MAILBOXES];
+static A_UINT32 g_BlockSizes[AR6K_MAILBOXES];
+
+#define BUFFER_PROC_LIST_DEPTH 4
+
+typedef struct _BUFFER_PROC_LIST{
+    A_UINT8  *pBuffer;
+    A_UINT32 length;
+}BUFFER_PROC_LIST;
+
+
+#define PUSH_BUFF_PROC_ENTRY(pList,len,pCurrpos) \
+{                                                   \
+    (pList)->pBuffer = (pCurrpos);                  \
+    (pList)->length = (len);                        \
+    (pCurrpos) += (len);                            \
+    (pList)++;                                      \
+}
+
+/* a simple and crude way to send different "message" sizes */
+static void AssembleBufferList(BUFFER_PROC_LIST *pList)
+{
+    A_UINT8 *pBuffer = g_Buffer;
+
+#if BUFFER_PROC_LIST_DEPTH < 4
+#error "Buffer processing list depth is not deep enough!!"
+#endif
+
+    PUSH_BUFF_PROC_ENTRY(pList,BUFFER1,pBuffer);
+    PUSH_BUFF_PROC_ENTRY(pList,BUFFER2,pBuffer);
+    PUSH_BUFF_PROC_ENTRY(pList,BUFFER3,pBuffer);
+    PUSH_BUFF_PROC_ENTRY(pList,BUFFER4,pBuffer);
+
+}
+
+#define FILL_ZERO     TRUE
+#define FILL_COUNTING FALSE
+static void InitBuffers(A_BOOL Zero)
+{
+    A_UINT16 *pBuffer16 = (A_UINT16 *)g_Buffer;
+    int      i;
+
+        /* fill buffer with 16 bit counting pattern or zeros */
+    for (i = 0; i <  (TOTAL_BYTES / 2) ; i++) {
+        if (!Zero) {
+            pBuffer16[i] = (A_UINT16)i;
+        } else {
+            pBuffer16[i] = 0;
+        }
+    }
+}
+
+
+static A_BOOL CheckOneBuffer(A_UINT16 *pBuffer16, int Length)
+{
+    int      i;
+    A_UINT16 startCount;
+    A_BOOL   success = TRUE;
+
+        /* get the starting count */
+    startCount = pBuffer16[0];
+        /* invert it, this is the expected value */
+    startCount = ~startCount;
+        /* scan the buffer and verify */
+    for (i = 0; i < (Length / 2) ; i++,startCount++) {
+            /* target will invert all the data */
+        if ((A_UINT16)pBuffer16[i] != (A_UINT16)~startCount) {
+            success = FALSE;
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Invalid Data Got:0x%X, Expecting:0x%X (offset:%d, total:%d) \n",
+                        pBuffer16[i], ((A_UINT16)~startCount), i, Length));
+             AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("0x%X 0x%X 0x%X 0x%X \n",
+                        pBuffer16[i], pBuffer16[i + 1], pBuffer16[i + 2],pBuffer16[i+3]));
+            break;
+        }
+    }
+
+    return success;
+}
+
+static A_BOOL CheckBuffers(void)
+{
+    int      i;
+    A_BOOL   success = TRUE;
+    BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
+
+        /* assemble the list */
+    AssembleBufferList(checkList);
+
+        /* scan the buffers and verify */
+    for (i = 0; i < BUFFER_PROC_LIST_DEPTH ; i++) {
+        success = CheckOneBuffer((A_UINT16 *)checkList[i].pBuffer, checkList[i].length);
+        if (!success) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer : 0x%X, Length:%d failed verify \n",
+                        (A_UINT32)checkList[i].pBuffer, checkList[i].length));
+            break;
+        }
+    }
+
+    return success;
+}
+
+    /* find the end marker for the last buffer we will be sending */
+static A_UINT16 GetEndMarker(void)
+{
+    A_UINT8  *pBuffer;
+    BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
+
+        /* fill up buffers with the normal counting pattern */
+    InitBuffers(FILL_COUNTING);
+
+        /* assemble the list we will be sending down */
+    AssembleBufferList(checkList);
+        /* point to the last 2 bytes of the last buffer */
+    pBuffer = &(checkList[BUFFER_PROC_LIST_DEPTH - 1].pBuffer[(checkList[BUFFER_PROC_LIST_DEPTH - 1].length) - 2]);
+
+        /* the last count in the last buffer is the marker */
+    return (A_UINT16)pBuffer[0] | ((A_UINT16)pBuffer[1] << 8);
+}
+
+#define ATH_PRINT_OUT_ZONE ATH_DEBUG_ERR
+
+/* send the ordered buffers to the target */
+static A_STATUS SendBuffers(AR6K_DEVICE *pDev, int mbox)
+{
+    A_STATUS         status = A_OK;
+    A_UINT32         request = HIF_WR_SYNC_BLOCK_INC;
+    BUFFER_PROC_LIST sendList[BUFFER_PROC_LIST_DEPTH];
+    int              i;
+    int              totalBytes = 0;
+    int              paddedLength;
+    int              totalwPadding = 0;
+
+    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sending buffers on mailbox : %d \n",mbox));
+
+        /* fill buffer with counting pattern */
+    InitBuffers(FILL_COUNTING);
+
+        /* assemble the order in which we send */
+    AssembleBufferList(sendList);
+
+    for (i = 0; i < BUFFER_PROC_LIST_DEPTH; i++) {
+
+            /* we are doing block transfers, so we need to pad everything to a block size */
+        paddedLength = (sendList[i].length + (g_BlockSizes[mbox] - 1)) &
+                       (~(g_BlockSizes[mbox] - 1));
+
+            /* send each buffer synchronously */
+        status = HIFReadWrite(pDev->HIFDevice,
+                              g_MailboxAddrs[mbox],
+                              sendList[i].pBuffer,
+                              paddedLength,
+                              request,
+                              NULL);
+        if (status != A_OK) {
+            break;
+        }
+        totalBytes += sendList[i].length;
+        totalwPadding += paddedLength;
+    }
+
+    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sent %d bytes (%d padded bytes) to mailbox : %d \n",totalBytes,totalwPadding,mbox));
+
+    return status;
+}
+
+/* poll the mailbox credit counter until we get a credit or timeout */
+static A_STATUS GetCredits(AR6K_DEVICE *pDev, int mbox, int *pCredits)
+{
+    A_STATUS status = A_OK;
+    int      timeout = TEST_CREDITS_RECV_TIMEOUT;
+    A_UINT8  credits = 0;
+    A_UINT32 address;
+
+    while (TRUE) {
+
+            /* Read the counter register to get credits, this auto-decrements  */
+        address = COUNT_DEC_ADDRESS + (AR6K_MAILBOXES + mbox) * 4;
+        status = HIFReadWrite(pDev->HIFDevice, address, &credits, sizeof(credits),
+                              HIF_RD_SYNC_BYTE_FIX, NULL);
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                ("Unable to decrement the command credit count register (mbox=%d)\n",mbox));
+            status = A_ERROR;
+            break;
+        }
+
+        if (credits) {
+            break;
+        }
+
+        timeout--;
+
+        if (timeout <= 0) {
+              AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                (" Timeout reading credit registers (mbox=%d, address:0x%X) \n",mbox,address));
+            status = A_ERROR;
+            break;
+        }
+
+         /* delay a little, target may not be ready */
+         msleep(1000);
+
+    }
+
+    if (status == A_OK) {
+        *pCredits = credits;
+    }
+
+    return status;
+}
+
+
+/* wait for the buffers to come back */
+static A_STATUS RecvBuffers(AR6K_DEVICE *pDev, int mbox)
+{
+    A_STATUS         status = A_OK;
+    A_UINT32         request = HIF_RD_SYNC_BLOCK_INC;
+    BUFFER_PROC_LIST recvList[BUFFER_PROC_LIST_DEPTH];
+    int              curBuffer;
+    int              credits;
+    int              i;
+    int              totalBytes = 0;
+    int              paddedLength;
+    int              totalwPadding = 0;
+
+    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for buffers on mailbox : %d \n",mbox));
+
+        /* zero the buffers */
+    InitBuffers(FILL_ZERO);
+
+        /* assemble the order in which we should receive */
+    AssembleBufferList(recvList);
+
+    curBuffer = 0;
+
+    while (curBuffer < BUFFER_PROC_LIST_DEPTH) {
+
+            /* get number of buffers that have been completed, this blocks
+             * until we get at least 1 credit or it times out */
+        status = GetCredits(pDev, mbox, &credits);
+
+        if (status != A_OK) {
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got %d messages on mailbox : %d \n",credits, mbox));
+
+            /* get all the buffers that are sitting on the queue */
+        for (i = 0; i < credits; i++) {
+            AR_DEBUG_ASSERT(curBuffer < BUFFER_PROC_LIST_DEPTH);
+                /* recv the current buffer synchronously, the buffers should come back in
+                 * order... with padding applied by the target */
+            paddedLength = (recvList[curBuffer].length + (g_BlockSizes[mbox] - 1)) &
+                       (~(g_BlockSizes[mbox] - 1));
+
+            status = HIFReadWrite(pDev->HIFDevice,
+                                  g_MailboxAddrs[mbox],
+                                  recvList[curBuffer].pBuffer,
+                                  paddedLength,
+                                  request,
+                                  NULL);
+            if (status != A_OK) {
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to read %d bytes on mailbox:%d : address:0x%X \n",
+                        recvList[curBuffer].length, mbox, g_MailboxAddrs[mbox]));
+                break;
+            }
+
+            totalwPadding += paddedLength;
+            totalBytes += recvList[curBuffer].length;
+            curBuffer++;
+        }
+
+        if (status != A_OK) {
+            break;
+        }
+            /* go back and get some more */
+        credits = 0;
+    }
+
+    if (totalBytes != TEST_BYTES) {
+        AR_DEBUG_ASSERT(FALSE);
+    }  else {
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got all buffers on mbox:%d total recv :%d (w/Padding : %d) \n",
+            mbox, totalBytes, totalwPadding));
+    }
+
+    return status;
+
+
+}
+
+static A_STATUS DoOneMboxHWTest(AR6K_DEVICE *pDev, int mbox)
+{
+    A_STATUS status;
+
+    do {
+            /* send out buffers */
+        status = SendBuffers(pDev,mbox);
+
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Sending buffers Failed : %d mbox:%d\n",status,mbox));
+            break;
+        }
+
+            /* go get them, this will block */
+        status =  RecvBuffers(pDev, mbox);
+
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Recv buffers Failed : %d mbox:%d\n",status,mbox));
+            break;
+        }
+
+            /* check the returned data patterns */
+        if (!CheckBuffers()) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer Verify Failed : mbox:%d\n",mbox));
+            status = A_ERROR;
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" Send/Recv success! mailbox : %d \n",mbox));
+
+    }  while (FALSE);
+
+    return status;
+}
+
+/* here is where the test starts */
+A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev)
+{
+    int      i;
+    A_STATUS status;
+    int      credits = 0;
+    A_UINT8  params[4];
+    int      numBufs;
+    int      bufferSize;
+    A_UINT16 temp;
+
+
+    AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest START -  \n"));
+
+    do {
+            /* get the addresses for all 4 mailboxes */
+        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
+                                    g_MailboxAddrs, sizeof(g_MailboxAddrs));
+
+        if (status != A_OK) {
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+            /* get the block sizes */
+        status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
+                                    g_BlockSizes, sizeof(g_BlockSizes));
+
+        if (status != A_OK) {
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+            /* note, the HIF layer usually reports mbox 0 to have a block size of
+             * 1, but our test wants to run in block-mode for all mailboxes, so we treat all mailboxes
+             * the same. */
+        g_BlockSizes[0] = g_BlockSizes[1];
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Block Size to use: %d \n",g_BlockSizes[0]));
+
+        if (g_BlockSizes[1] > BUFFER_BLOCK_PAD) {
+            AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("%d Block size is too large for buffer pad %d\n",
+                g_BlockSizes[1], BUFFER_BLOCK_PAD));
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for target.... \n"));
+
+            /* the target lets us know it is ready by giving us 1 credit on
+             * mailbox 0 */
+        status = GetCredits(pDev, 0, &credits);
+
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait for target ready \n"));
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Target is ready ...\n"));
+
+            /* read the first 4 scratch registers */
+        status = HIFReadWrite(pDev->HIFDevice,
+                              SCRATCH_ADDRESS,
+                              params,
+                              4,
+                              HIF_RD_SYNC_BYTE_INC,
+                              NULL);
+
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait get parameters \n"));
+            break;
+        }
+
+        numBufs = params[0];
+        bufferSize = (int)(((A_UINT16)params[2] << 8) | (A_UINT16)params[1]);
+
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE,
+            ("Target parameters: bufs per mailbox:%d, buffer size:%d bytes (total space: %d, minimum required space (w/padding): %d) \n",
+            numBufs, bufferSize, (numBufs * bufferSize), TOTAL_BYTES));
+
+        if ((numBufs * bufferSize) < TOTAL_BYTES) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Not Enough buffer space to run test! need:%d, got:%d \n",
+                TOTAL_BYTES, (numBufs*bufferSize)));
+            status = A_ERROR;
+            break;
+        }
+
+        temp = GetEndMarker();
+
+        status = HIFReadWrite(pDev->HIFDevice,
+                              SCRATCH_ADDRESS + 4,
+                              (A_UINT8 *)&temp,
+                              2,
+                              HIF_WR_SYNC_BYTE_INC,
+                              NULL);
+
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write end marker \n"));
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("End Marker: 0x%X \n",temp));
+
+        temp = (A_UINT16)g_BlockSizes[1];
+            /* convert to a mask */
+        temp = temp - 1;
+        status = HIFReadWrite(pDev->HIFDevice,
+                              SCRATCH_ADDRESS + 6,
+                              (A_UINT8 *)&temp,
+                              2,
+                              HIF_WR_SYNC_BYTE_INC,
+                              NULL);
+
+        if (status != A_OK) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write block mask \n"));
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Set Block Mask: 0x%X \n",temp));
+
+            /* execute the test on each mailbox */
+        for (i = 0; i < AR6K_MAILBOXES; i++) {
+            status = DoOneMboxHWTest(pDev, i);
+            if (status != A_OK) {
+                break;
+            }
+        }
+
+    } while (FALSE);
+
+    if (status == A_OK) {
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - SUCCESS! -  \n"));
+    } else {
+        AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - FAILED! -  \n"));
+    }
+        /* don't let HTC_Start continue, the target is actually not running any HTC code */
+    return A_ERROR;
+}
+#endif
+
+
+
diff --git a/drivers/ar6000/htc/ar6k.h b/drivers/ar6000/htc/ar6k.h
new file mode 100644
index 00000000000..301ab34a37e
--- /dev/null
+++ b/drivers/ar6000/htc/ar6k.h
@@ -0,0 +1,191 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef AR6K_H_
+#define AR6K_H_
+
+#define AR6K_MAILBOXES 4
+
+/* HTC runs over mailbox 0 */
+#define HTC_MAILBOX          0
+
+#define AR6K_TARGET_DEBUG_INTR_MASK     0x01
+
+#define OTHER_INTS_ENABLED (INT_STATUS_ENABLE_ERROR_MASK |   \
+                            INT_STATUS_ENABLE_CPU_MASK   |   \
+                            INT_STATUS_ENABLE_COUNTER_MASK)
+
+//#define MBOXHW_UNIT_TEST 1
+
+#include "athstartpack.h"
+typedef PREPACK struct _AR6K_IRQ_PROC_REGISTERS {
+    A_UINT8                      host_int_status;
+    A_UINT8                      cpu_int_status;
+    A_UINT8                      error_int_status;
+    A_UINT8                      counter_int_status;
+    A_UINT8                      mbox_frame;
+    A_UINT8                      rx_lookahead_valid;
+    A_UINT8                      hole[2];
+    A_UINT32                     rx_lookahead[2];
+} POSTPACK AR6K_IRQ_PROC_REGISTERS;
+
+#define AR6K_IRQ_PROC_REGS_SIZE sizeof(AR6K_IRQ_PROC_REGISTERS)
+
+
+
+typedef PREPACK struct _AR6K_IRQ_ENABLE_REGISTERS {
+    A_UINT8                      int_status_enable;
+    A_UINT8                      cpu_int_status_enable;
+    A_UINT8                      error_status_enable;
+    A_UINT8                      counter_int_status_enable;
+} POSTPACK AR6K_IRQ_ENABLE_REGISTERS;
+
+#include "athendpack.h"
+
+#define AR6K_IRQ_ENABLE_REGS_SIZE sizeof(AR6K_IRQ_ENABLE_REGISTERS)
+
+#define AR6K_REG_IO_BUFFER_SIZE     32
+#define AR6K_MAX_REG_IO_BUFFERS     8
+
+/* buffers for ASYNC I/O */
+typedef struct AR6K_ASYNC_REG_IO_BUFFER {
+    HTC_PACKET    HtcPacket;   /* we use an HTC packet as a wrapper for our async register-based I/O */
+    A_UINT8       Buffer[AR6K_REG_IO_BUFFER_SIZE];
+} AR6K_ASYNC_REG_IO_BUFFER;
+
+typedef struct _AR6K_DEVICE {
+    A_MUTEX_T                   Lock;
+    AR6K_IRQ_PROC_REGISTERS     IrqProcRegisters;
+    AR6K_IRQ_ENABLE_REGISTERS   IrqEnableRegisters;
+    void                        *HIFDevice;
+    A_UINT32                    BlockSize;
+    A_UINT32                    BlockMask;
+    A_UINT32                    MailboxAddress;
+    HIF_PENDING_EVENTS_FUNC     GetPendingEventsFunc;
+    void                        *HTCContext;
+    HTC_PACKET_QUEUE            RegisterIOList;
+    AR6K_ASYNC_REG_IO_BUFFER    RegIOBuffers[AR6K_MAX_REG_IO_BUFFERS];
+    void                        (*TargetFailureCallback)(void *Context);
+    A_STATUS                    (*MessagePendingCallback)(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc);
+    HIF_DEVICE_IRQ_PROCESSING_MODE  HifIRQProcessingMode;
+    HIF_MASK_UNMASK_RECV_EVENT      HifMaskUmaskRecvEvent;
+} AR6K_DEVICE;
+
+#define IS_DEV_IRQ_PROCESSING_ASYNC_ALLOWED(pDev) ((pDev)->HifIRQProcessingMode != HIF_DEVICE_IRQ_SYNC_ONLY)
+
+A_STATUS DevSetup(AR6K_DEVICE *pDev);
+A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev);
+A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev);
+A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev,
+                            A_UINT32    *pLookAhead,
+                            int          TimeoutMS);
+A_STATUS DevRWCompletionHandler(void *context, A_STATUS status);
+A_STATUS DevDsrHandler(void *context);
+A_STATUS DevCheckPendingRecvMsgsAsync(void *context);
+void     DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS   *pIrqProcRegs,
+                          AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs);
+
+#define DEV_STOP_RECV_ASYNC TRUE
+#define DEV_STOP_RECV_SYNC  FALSE
+#define DEV_ENABLE_RECV_ASYNC TRUE
+#define DEV_ENABLE_RECV_SYNC  FALSE
+A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL ASyncMode);
+A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL ASyncMode);
+
+static INLINE A_STATUS DevSendPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket, A_UINT32 SendLength) {
+    A_UINT32 paddedLength;
+    A_BOOL   sync = (pPacket->Completion == NULL) ? TRUE : FALSE;
+    A_STATUS status;
+
+       /* adjust the length to be a multiple of block size if appropriate */
+    paddedLength = (SendLength + (pDev->BlockMask)) &
+                    (~(pDev->BlockMask));
+#if 0 // BufferLength may not be set in , fix this...
+    if (paddedLength > pPacket->BufferLength) {
+        AR_DEBUG_ASSERT(FALSE);
+        if (pPacket->Completion != NULL) {
+            COMPLETE_HTC_PACKET(pPacket,A_EINVAL);
+        }
+        return A_EINVAL;
+    }
+#endif
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+                ("DevSendPacket, Padded Length: %d Mbox:0x%X (mode:%s)\n",
+                paddedLength,
+                pDev->MailboxAddress,
+                sync ? "SYNC" : "ASYNC"));
+
+    status = HIFReadWrite(pDev->HIFDevice,
+                          pDev->MailboxAddress,
+                          pPacket->pBuffer,
+                          paddedLength,     /* the padded length */
+                          sync ? HIF_WR_SYNC_BLOCK_INC : HIF_WR_ASYNC_BLOCK_INC,
+                          sync ? NULL : pPacket);  /* pass the packet as the context to the HIF request */
+
+    if (sync) {
+        pPacket->Status = status;
+    }
+
+    return status;
+}
+
+static INLINE A_STATUS DevRecvPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket, A_UINT32 RecvLength) {
+    A_UINT32 paddedLength;
+    A_STATUS status;
+    A_BOOL   sync = (pPacket->Completion == NULL) ? TRUE : FALSE;
+
+        /* adjust the length to be a multiple of block size if appropriate */
+    paddedLength = (RecvLength + (pDev->BlockMask)) &
+                    (~(pDev->BlockMask));
+    if (paddedLength > pPacket->BufferLength) {
+        AR_DEBUG_ASSERT(FALSE);
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                ("DevRecvPacket, Not enough space for padlen:%d recvlen:%d bufferlen:%d \n",
+                    paddedLength,RecvLength,pPacket->BufferLength));
+        if (pPacket->Completion != NULL) {
+            COMPLETE_HTC_PACKET(pPacket,A_EINVAL);
+        }
+        return A_EINVAL;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+                ("DevRecvPacket, Padded Length: %d Mbox:0x%X (mode:%s)\n",
+                paddedLength,
+                pDev->MailboxAddress,
+                sync ? "SYNC" : "ASYNC"));
+
+    status = HIFReadWrite(pDev->HIFDevice,
+                          pDev->MailboxAddress,
+                          pPacket->pBuffer,
+                          paddedLength,
+                          sync ? HIF_RD_SYNC_BLOCK_INC : HIF_RD_ASYNC_BLOCK_INC,
+                          sync ? NULL : pPacket);  /* pass the packet as the context to the HIF request */
+
+    if (sync) {
+        pPacket->Status = status;
+    }
+
+    return status;
+}
+
+#ifdef MBOXHW_UNIT_TEST
+A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev);
+#endif
+
+#endif /*AR6K_H_*/
diff --git a/drivers/ar6000/htc/ar6k_events.c b/drivers/ar6000/htc/ar6k_events.c
new file mode 100644
index 00000000000..91b29af3711
--- /dev/null
+++ b/drivers/ar6000/htc/ar6k_events.c
@@ -0,0 +1,638 @@
+/*
+ * AR6K Driver layer event handling (i.e. interrupts, message polling)
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "AR6Khwreg.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "hif.h"
+#include "htc_packet.h"
+#include "ar6k.h"
+
+extern void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket);
+extern HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev);
+
+static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev);
+
+#define DELAY_PER_INTERVAL_MS 10  /* 10 MS delay per polling interval */
+
+/* completion routine for ALL HIF layer async I/O */
+A_STATUS DevRWCompletionHandler(void *context, A_STATUS status)
+{
+    HTC_PACKET *pPacket = (HTC_PACKET *)context;
+
+    COMPLETE_HTC_PACKET(pPacket,status);
+
+    return A_OK;
+}
+
+/* mailbox recv message polling */
+A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev,
+                            A_UINT32    *pLookAhead,
+                            int          TimeoutMS)
+{
+    A_STATUS status = A_OK;
+    int      timeout = TimeoutMS/DELAY_PER_INTERVAL_MS;
+
+    AR_DEBUG_ASSERT(timeout > 0);
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+DevPollMboxMsgRecv \n"));
+
+    while (TRUE) {
+
+        if (pDev->GetPendingEventsFunc != NULL)
+		{
+
+            HIF_PENDING_EVENTS_INFO events;
+
+            /* the HIF layer uses a special mechanism to get events, do this
+             * synchronously */
+            status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
+                                            &events,
+                                            NULL);
+            if (A_FAILED(status))
+			{
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to get pending events \n"));
+				break;
+            }
+
+            if (events.Events & HIF_RECV_MSG_AVAIL)
+			{
+                    /*  there is a message available, the lookahead should be valid now */
+                *pLookAhead = events.LookAhead;
+
+                break;
+            }
+        }
+		else
+		{
+
+                /* this is the standard HIF way.... */
+                /* load the register table */
+            status = HIFReadWrite(pDev->HIFDevice,
+                                  HOST_INT_STATUS_ADDRESS,
+                                  (A_UINT8 *)&pDev->IrqProcRegisters,
+                                  AR6K_IRQ_PROC_REGS_SIZE,
+                                  HIF_RD_SYNC_BYTE_INC,
+                                  NULL);
+
+            if (A_FAILED(status))
+			{
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to read register table \n"));
+                break;
+            }
+
+                /* check for MBOX data and valid lookahead */
+            if (pDev->IrqProcRegisters.host_int_status & (1 << HTC_MAILBOX))
+			{
+                if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX))
+				{
+                    /* mailbox has a message and the look ahead is valid */
+                    *pLookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX];
+                    break;
+                }
+            }
+
+        }
+
+        timeout--;
+
+        if (timeout <= 0)
+		{
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Timeout waiting for recv message \n"));
+            status = A_ERROR;
+
+                /* check if the target asserted */
+            if ( pDev->IrqProcRegisters.counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) {
+                    /* target signaled an assert, process this pending interrupt
+                     * this will call the target failure handler */
+                DevServiceDebugInterrupt(pDev);
+            }
+
+            break;
+        }
+
+            /* delay a little  */
+         msleep(DELAY_PER_INTERVAL_MS);
+         AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("  Retry Mbox Poll : %d \n",timeout));
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-DevPollMboxMsgRecv \n"));
+
+    return status;
+}
+
+static A_STATUS DevServiceCPUInterrupt(AR6K_DEVICE *pDev)
+{
+    A_STATUS status;
+    A_UINT8  cpu_int_status;
+    A_UINT8  regBuffer[4];
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("CPU Interrupt\n"));
+    cpu_int_status = pDev->IrqProcRegisters.cpu_int_status &
+                     pDev->IrqEnableRegisters.cpu_int_status_enable;
+    AR_DEBUG_ASSERT(cpu_int_status);
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+                    ("Valid interrupt source(s) in CPU_INT_STATUS: 0x%x\n",
+                    cpu_int_status));
+
+        /* Clear the interrupt */
+    pDev->IrqProcRegisters.cpu_int_status &= ~cpu_int_status; /* W1C */
+
+        /* set up the register transfer buffer to hit the register 4 times , this is done
+         * to make the access 4-byte aligned to mitigate issues with host bus interconnects that
+         * restrict bus transfer lengths to be a multiple of 4-bytes */
+
+        /* set W1C value to clear the interrupt, this hits the register first */
+    regBuffer[0] = cpu_int_status;
+        /* the remaining 4 values are set to zero which have no-effect  */
+    regBuffer[1] = 0;
+    regBuffer[2] = 0;
+    regBuffer[3] = 0;
+
+    status = HIFReadWrite(pDev->HIFDevice,
+                          CPU_INT_STATUS_ADDRESS,
+                          regBuffer,
+                          4,
+                          HIF_WR_SYNC_BYTE_FIX,
+                          NULL);
+
+    AR_DEBUG_ASSERT(status == A_OK);
+    return status;
+}
+
+
+static A_STATUS DevServiceErrorInterrupt(AR6K_DEVICE *pDev)
+{
+    A_STATUS status;
+    A_UINT8  error_int_status;
+    A_UINT8  regBuffer[4];
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error Interrupt\n"));
+    error_int_status = pDev->IrqProcRegisters.error_int_status & 0x0F;
+    AR_DEBUG_ASSERT(error_int_status);
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+                    ("Valid interrupt source(s) in ERROR_INT_STATUS: 0x%x\n",
+                    error_int_status));
+
+    if (ERROR_INT_STATUS_WAKEUP_GET(error_int_status)) {
+        /* Wakeup */
+        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error : Wakeup\n"));
+    }
+
+    if (ERROR_INT_STATUS_RX_UNDERFLOW_GET(error_int_status)) {
+        /* Rx Underflow */
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Rx Underflow\n"));
+    }
+
+    if (ERROR_INT_STATUS_TX_OVERFLOW_GET(error_int_status)) {
+        /* Tx Overflow */
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Tx Overflow\n"));
+    }
+
+        /* Clear the interrupt */
+    pDev->IrqProcRegisters.error_int_status &= ~error_int_status; /* W1C */
+
+        /* set up the register transfer buffer to hit the register 4 times , this is done
+         * to make the access 4-byte aligned to mitigate issues with host bus interconnects that
+         * restrict bus transfer lengths to be a multiple of 4-bytes */
+
+        /* set W1C value to clear the interrupt, this hits the register first */
+    regBuffer[0] = error_int_status;
+        /* the remaining 4 values are set to zero which have no-effect  */
+    regBuffer[1] = 0;
+    regBuffer[2] = 0;
+    regBuffer[3] = 0;
+
+    status = HIFReadWrite(pDev->HIFDevice,
+                          ERROR_INT_STATUS_ADDRESS,
+                          regBuffer,
+                          4,
+                          HIF_WR_SYNC_BYTE_FIX,
+                          NULL);
+
+    AR_DEBUG_ASSERT(status == A_OK);
+    return status;
+}
+
+static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev)
+{
+    A_UINT32 dummy;
+    A_STATUS status;
+
+    /* Send a target failure event to the application */
+    AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Target debug interrupt\n"));
+
+    if (pDev->TargetFailureCallback != NULL) {
+        pDev->TargetFailureCallback(pDev->HTCContext);
+    }
+
+    /* clear the interrupt , the debug error interrupt is
+     * counter 0 */
+        /* read counter to clear interrupt */
+    status = HIFReadWrite(pDev->HIFDevice,
+                          COUNT_DEC_ADDRESS,
+                          (A_UINT8 *)&dummy,
+                          4,
+                          HIF_RD_SYNC_BYTE_INC,
+                          NULL);
+
+    AR_DEBUG_ASSERT(status == A_OK);
+    return status;
+}
+
+static A_STATUS DevServiceCounterInterrupt(AR6K_DEVICE *pDev)
+{
+    A_UINT8 counter_int_status;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Counter Interrupt\n"));
+
+    counter_int_status = pDev->IrqProcRegisters.counter_int_status &
+                         pDev->IrqEnableRegisters.counter_int_status_enable;
+
+    AR_DEBUG_ASSERT(counter_int_status);
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+                    ("Valid interrupt source(s) in COUNTER_INT_STATUS: 0x%x\n",
+                    counter_int_status));
+
+    /* Check if the debug interrupt is pending */
+    if (counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) {
+        return DevServiceDebugInterrupt(pDev);
+    }
+
+    return A_OK;
+}
+
+/* callback when our fetch to get interrupt status registers completes */
+static void DevGetEventAsyncHandler(void *Context, HTC_PACKET *pPacket)
+{
+    AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context;
+    A_UINT32    lookAhead = 0;
+    A_BOOL      otherInts = FALSE;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevGetEventAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+    do {
+
+        if (A_FAILED(pPacket->Status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                    (" GetEvents I/O request failed, status:%d \n", pPacket->Status));
+            /* bail out, don't unmask HIF interrupt */
+            break;
+        }
+
+        if (pDev->GetPendingEventsFunc != NULL) {
+                /* the HIF layer collected the information for us */
+            HIF_PENDING_EVENTS_INFO *pEvents = (HIF_PENDING_EVENTS_INFO *)pPacket->pBuffer;
+            if (pEvents->Events & HIF_RECV_MSG_AVAIL) {
+                lookAhead = pEvents->LookAhead;
+                if (0 == lookAhead) {
+                    AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler1, lookAhead is zero! \n"));
+                }
+            }
+            if (pEvents->Events & HIF_OTHER_EVENTS) {
+                otherInts = TRUE;
+            }
+        } else {
+                /* standard interrupt table handling.... */
+            AR6K_IRQ_PROC_REGISTERS *pReg = (AR6K_IRQ_PROC_REGISTERS *)pPacket->pBuffer;
+            A_UINT8                 host_int_status;
+
+            host_int_status = pReg->host_int_status & pDev->IrqEnableRegisters.int_status_enable;
+
+            if (host_int_status & (1 << HTC_MAILBOX)) {
+                host_int_status &= ~(1 << HTC_MAILBOX);
+                if (pReg->rx_lookahead_valid & (1 << HTC_MAILBOX)) {
+                        /* mailbox has a message and the look ahead is valid */
+                    lookAhead = pReg->rx_lookahead[HTC_MAILBOX];
+                    if (0 == lookAhead) {
+                        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler2, lookAhead is zero! \n"));
+                    }
+                }
+            }
+
+            if (host_int_status) {
+                    /* there are other interrupts to handle */
+                otherInts = TRUE;
+            }
+        }
+
+        if (otherInts || (lookAhead == 0)) {
+            /* if there are other interrupts to process, we cannot do this in the async handler so
+             * ack the interrupt which will cause our sync handler to run again
+             * if however there are no more messages, we can now ack the interrupt  */
+            AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+                (" Acking interrupt from DevGetEventAsyncHandler (otherints:%d, lookahead:0x%X)\n",
+                otherInts, lookAhead));
+            HIFAckInterrupt(pDev->HIFDevice);
+        } else {
+            AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+                    (" DevGetEventAsyncHandler : detected another message, lookahead :0x%X \n",
+                    lookAhead));
+                /* lookahead is non-zero and there are no other interrupts to service,
+                 * go get the next message */
+            pDev->MessagePendingCallback(pDev->HTCContext, lookAhead, NULL);
+        }
+
+    } while (FALSE);
+
+        /* free this IO packet */
+    AR6KFreeIOPacket(pDev,pPacket);
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevGetEventAsyncHandler \n"));
+}
+
+/* called by the HTC layer when it wants us to check if the device has any more pending
+ * recv messages, this starts off a series of async requests to read interrupt registers  */
+A_STATUS DevCheckPendingRecvMsgsAsync(void *context)
+{
+    AR6K_DEVICE  *pDev = (AR6K_DEVICE *)context;
+    A_STATUS      status = A_OK;
+    HTC_PACKET   *pIOPacket;
+
+    /* this is called in an ASYNC only context, we may NOT block, sleep or call any apis that can
+     * cause us to switch contexts */
+
+   AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevCheckPendingRecvMsgsAsync: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+   do {
+
+        if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) {
+                /* break the async processing chain right here, no need to continue.
+                 * The DevDsrHandler() will handle things in a loop when things are driven
+                 * synchronously  */
+            break;
+        }
+            /* first allocate one of our HTC packets we created for async I/O
+             * we reuse HTC packet definitions so that we can use the completion mechanism
+             * in DevRWCompletionHandler() */
+        pIOPacket = AR6KAllocIOPacket(pDev);
+
+        if (NULL == pIOPacket) {
+                /* there should be only 1 asynchronous request out at a time to read these registers
+                 * so this should actually never happen */
+            status = A_NO_MEMORY;
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+            /* stick in our completion routine when the I/O operation completes */
+        pIOPacket->Completion = DevGetEventAsyncHandler;
+        pIOPacket->pContext = pDev;
+
+        if (pDev->GetPendingEventsFunc) {
+                /* HIF layer has it's own mechanism, pass the IO to it.. */
+            status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
+                                                (HIF_PENDING_EVENTS_INFO *)pIOPacket->pBuffer,
+                                                pIOPacket);
+
+        } else {
+                /* standard way, read the interrupt register table asynchronously again */
+            status = HIFReadWrite(pDev->HIFDevice,
+                                  HOST_INT_STATUS_ADDRESS,
+                                  pIOPacket->pBuffer,
+                                  AR6K_IRQ_PROC_REGS_SIZE,
+                                  HIF_RD_ASYNC_BYTE_INC,
+                                  pIOPacket);
+        }
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Async IO issued to get interrupt status...\n"));
+   } while (FALSE);
+
+   AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevCheckPendingRecvMsgsAsync \n"));
+
+   return status;
+}
+
+/* process pending interrupts synchronously */
+static A_STATUS ProcessPendingIRQs(AR6K_DEVICE *pDev, A_BOOL *pDone, A_BOOL *pASyncProcessing)
+{
+    A_STATUS    status = A_OK;
+    A_UINT8     host_int_status = 0;
+    A_UINT32    lookAhead = 0;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+ProcessPendingIRQs: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+    /*** NOTE: the HIF implementation guarantees that the context of this call allows
+     *         us to perform SYNCHRONOUS I/O, that is we can block, sleep or call any API that
+     *         can block or switch thread/task ontexts.
+     *         This is a fully schedulable context.
+     * */
+    do {
+
+        if (pDev->GetPendingEventsFunc != NULL) {
+            HIF_PENDING_EVENTS_INFO events;
+
+                /* the HIF layer uses a special mechanism to get events
+                 * get this synchronously  */
+            status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
+                                                &events,
+                                                NULL);
+
+            if (A_FAILED(status)) {
+                break;
+            }
+
+            if (events.Events & HIF_RECV_MSG_AVAIL) {
+                lookAhead = events.LookAhead;
+                if (0 == lookAhead) {
+                    AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs1 lookAhead is zero! \n"));
+                }
+            }
+
+            if (!(events.Events & HIF_OTHER_EVENTS) ||
+                !(pDev->IrqEnableRegisters.int_status_enable & OTHER_INTS_ENABLED)) {
+                    /* no need to read the register table, no other interesting interrupts.
+                     * Some interfaces (like SPI) can shadow interrupt sources without
+                     * requiring the host to do a full table read */
+                break;
+            }
+
+            /* otherwise fall through and read the register table */
+        }
+
+        /*
+         * Read the first 28 bytes of the HTC register table. This will yield us
+         * the value of different int status registers and the lookahead
+         * registers.
+         *    length = sizeof(int_status) + sizeof(cpu_int_status) +
+         *             sizeof(error_int_status) + sizeof(counter_int_status) +
+         *             sizeof(mbox_frame) + sizeof(rx_lookahead_valid) +
+         *             sizeof(hole) +  sizeof(rx_lookahead) +
+         *             sizeof(int_status_enable) + sizeof(cpu_int_status_enable) +
+         *             sizeof(error_status_enable) +
+         *             sizeof(counter_int_status_enable);
+         *
+        */
+        status = HIFReadWrite(pDev->HIFDevice,
+                              HOST_INT_STATUS_ADDRESS,
+                              (A_UINT8 *)&pDev->IrqProcRegisters,
+                              AR6K_IRQ_PROC_REGS_SIZE,
+                              HIF_RD_SYNC_BYTE_INC,
+                              NULL);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_IRQ)) {
+            DevDumpRegisters(&pDev->IrqProcRegisters,
+                             &pDev->IrqEnableRegisters);
+        }
+
+            /* Update only those registers that are enabled */
+        host_int_status = pDev->IrqProcRegisters.host_int_status &
+                          pDev->IrqEnableRegisters.int_status_enable;
+
+        if (NULL == pDev->GetPendingEventsFunc) {
+                /* only look at mailbox status if the HIF layer did not provide this function,
+                 * on some HIF interfaces reading the RX lookahead is not valid to do */
+            if (host_int_status & (1 << HTC_MAILBOX)) {
+                    /* mask out pending mailbox value, we use "lookAhead" as the real flag for
+                     * mailbox processing below */
+                host_int_status &= ~(1 << HTC_MAILBOX);
+                if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX)) {
+                        /* mailbox has a message and the look ahead is valid */
+                    lookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX];
+                    if (0 == lookAhead) {
+                        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs2, lookAhead is zero! \n"));
+                    }
+                }
+            }
+        } else {
+                /* not valid to check if the HIF has another mechanism for reading mailbox pending status*/
+            host_int_status &= ~(1 << HTC_MAILBOX);
+        }
+
+    } while (FALSE);
+
+
+    do {
+
+            /* did the interrupt status fetches succeed? */
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        if ((0 == host_int_status) && (0 == lookAhead)) {
+                /* nothing to process, the caller can use this to break out of a loop */
+            *pDone = TRUE;
+            break;
+        }
+
+        if (lookAhead != 0) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("Pending mailbox message, LookAhead: 0x%X\n",lookAhead));
+                /* Mailbox Interrupt, the HTC layer may issue async requests to empty the
+                 * mailbox...
+                 * When emptying the recv mailbox we use the async handler above called from the
+                 * completion routine of the callers read request. This can improve performance
+                 * by reducing context switching when we rapidly pull packets */
+            status = pDev->MessagePendingCallback(pDev->HTCContext, lookAhead, pASyncProcessing);
+            if (A_FAILED(status)) {
+                break;
+            }
+        }
+
+            /* now handle the rest of them */
+        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+                            (" Valid interrupt source(s) for OTHER interrupts: 0x%x\n",
+                            host_int_status));
+
+        if (HOST_INT_STATUS_CPU_GET(host_int_status)) {
+                /* CPU Interrupt */
+            status = DevServiceCPUInterrupt(pDev);
+            if (A_FAILED(status)){
+                break;
+            }
+        }
+
+        if (HOST_INT_STATUS_ERROR_GET(host_int_status)) {
+                /* Error Interrupt */
+            status = DevServiceErrorInterrupt(pDev);
+            if (A_FAILED(status)){
+                break;
+            }
+        }
+
+        if (HOST_INT_STATUS_COUNTER_GET(host_int_status)) {
+                /* Counter Interrupt */
+            status = DevServiceCounterInterrupt(pDev);
+            if (A_FAILED(status)){
+                break;
+            }
+        }
+
+    } while (FALSE);
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-ProcessPendingIRQs: (done:%d, async:%d) status=%d \n",
+                *pDone, *pASyncProcessing, status));
+
+    return status;
+}
+
+
+/* Synchronousinterrupt handler, this handler kicks off all interrupt processing.*/
+A_STATUS DevDsrHandler(void *context)
+{
+    AR6K_DEVICE *pDev = (AR6K_DEVICE *)context;
+    A_STATUS    status = A_OK;
+    A_BOOL      done = FALSE;
+    A_BOOL      asyncProc = FALSE;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDsrHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+
+    while (!done) {
+        status = ProcessPendingIRQs(pDev, &done, &asyncProc);
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) {
+            /* the HIF layer does not allow async IRQ processing, override the asyncProc flag */
+            asyncProc = FALSE;
+            /* this will cause us to re-enter ProcessPendingIRQ() and re-read interrupt status registers.
+             * this has a nice side effect of blocking us until all async read requests are completed.
+             * This behavior is required on some HIF implementations that do not allow ASYNC
+             * processing in interrupt handlers (like Windows CE) */
+        }
+
+        if (asyncProc) {
+                /* the function performed some async I/O for performance, we
+                   need to exit the ISR immediately, the check below will prevent the interrupt from being
+                   Ack'd while we handle it asynchronously */
+            break;
+        }
+
+    }
+
+    if (A_SUCCESS(status) && !asyncProc) {
+            /* Ack the interrupt only if :
+             *  1. we did not get any errors in processing interrupts
+             *  2. there are no outstanding async processing requests */
+        AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Acking interrupt from DevDsrHandler \n"));
+        HIFAckInterrupt(pDev->HIFDevice);
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDsrHandler \n"));
+    return A_OK;
+}
+
+
diff --git a/drivers/ar6000/htc/htc.c b/drivers/ar6000/htc/htc.c
new file mode 100644
index 00000000000..d52ed944e0d
--- /dev/null
+++ b/drivers/ar6000/htc/htc.c
@@ -0,0 +1,508 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "htc_internal.h"
+
+
+static HTC_INIT_INFO  HTCInitInfo = {NULL,NULL,NULL};
+static A_BOOL         HTCInitialized = FALSE;
+
+static A_STATUS HTCTargetInsertedHandler(void *hif_handle);
+static A_STATUS HTCTargetRemovedHandler(void *handle, A_STATUS status);
+static void HTCReportFailure(void *Context);
+
+/* Initializes the HTC layer */
+A_STATUS HTCInit(HTC_INIT_INFO *pInitInfo)
+{
+    HTC_CALLBACKS htcCallbacks;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Enter\n"));
+    if (HTCInitialized) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Exit\n"));
+        return A_OK;
+    }
+
+    A_MEMCPY(&HTCInitInfo,pInitInfo,sizeof(HTC_INIT_INFO));
+
+    A_MEMZERO(&htcCallbacks, sizeof(HTC_CALLBACKS));
+
+        /* setup HIF layer callbacks */
+    htcCallbacks.deviceInsertedHandler = HTCTargetInsertedHandler;
+    htcCallbacks.deviceRemovedHandler = HTCTargetRemovedHandler;
+        /* the device layer handles these */
+    htcCallbacks.rwCompletionHandler = DevRWCompletionHandler;
+    htcCallbacks.dsrHandler = DevDsrHandler;
+    HIFInit(&htcCallbacks);
+    HTCInitialized = TRUE;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Exit\n"));
+    return A_OK;
+}
+
+void HTCFreeControlBuffer(HTC_TARGET *target, HTC_PACKET *pPacket, HTC_PACKET_QUEUE *pList)
+{
+    LOCK_HTC(target);
+    HTC_PACKET_ENQUEUE(pList,pPacket);
+    UNLOCK_HTC(target);
+}
+
+HTC_PACKET *HTCAllocControlBuffer(HTC_TARGET *target,  HTC_PACKET_QUEUE *pList)
+{
+    HTC_PACKET *pPacket;
+
+    LOCK_HTC(target);
+    pPacket = HTC_PACKET_DEQUEUE(pList);
+    UNLOCK_HTC(target);
+
+    return pPacket;
+}
+
+/* cleanup the HTC instance */
+static void HTCCleanup(HTC_TARGET *target)
+{
+    if (A_IS_MUTEX_VALID(&target->HTCLock)) {
+        A_MUTEX_DELETE(&target->HTCLock);
+    }
+
+    if (A_IS_MUTEX_VALID(&target->HTCRxLock)) {
+        A_MUTEX_DELETE(&target->HTCRxLock);
+    }
+
+    if (A_IS_MUTEX_VALID(&target->HTCTxLock)) {
+        A_MUTEX_DELETE(&target->HTCTxLock);
+    }
+        /* free our instance */
+    A_FREE(target);
+}
+
+/* registered target arrival callback from the HIF layer */
+static A_STATUS HTCTargetInsertedHandler(void *hif_handle)
+{
+    HTC_TARGET              *target = NULL;
+    A_STATUS                 status;
+    int                      i;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("htcTargetInserted - Enter\n"));
+
+    do {
+
+            /* allocate target memory */
+        if ((target = (HTC_TARGET *)A_MALLOC(sizeof(HTC_TARGET))) == NULL) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to allocate memory\n"));
+            status = A_ERROR;
+            break;
+        }
+
+        A_MEMZERO(target, sizeof(HTC_TARGET));
+        A_MUTEX_INIT(&target->HTCLock);
+        A_MUTEX_INIT(&target->HTCRxLock);
+        A_MUTEX_INIT(&target->HTCTxLock);
+        INIT_HTC_PACKET_QUEUE(&target->ControlBufferTXFreeList);
+        INIT_HTC_PACKET_QUEUE(&target->ControlBufferRXFreeList);
+
+            /* give device layer the hif device handle */
+        target->Device.HIFDevice = hif_handle;
+            /* give the device layer our context (for event processing)
+             * the device layer will register it's own context with HIF
+             * so we need to set this so we can fetch it in the target remove handler */
+        target->Device.HTCContext = target;
+            /* set device layer target failure callback */
+        target->Device.TargetFailureCallback = HTCReportFailure;
+            /* set device layer recv message pending callback */
+        target->Device.MessagePendingCallback = HTCRecvMessagePendingHandler;
+        target->EpWaitingForBuffers = ENDPOINT_MAX;
+
+            /* setup device layer */
+        status = DevSetup(&target->Device);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* carve up buffers/packets for control messages */
+        for (i = 0; i < NUM_CONTROL_RX_BUFFERS; i++) {
+            HTC_PACKET *pControlPacket;
+            pControlPacket = &target->HTCControlBuffers[i].HtcPacket;
+            SET_HTC_PACKET_INFO_RX_REFILL(pControlPacket,
+                                          target,
+                                          target->HTCControlBuffers[i].Buffer,
+                                          HTC_CONTROL_BUFFER_SIZE,
+                                          ENDPOINT_0);
+            HTC_FREE_CONTROL_RX(target,pControlPacket);
+        }
+
+        for (;i < NUM_CONTROL_BUFFERS;i++) {
+             HTC_PACKET *pControlPacket;
+             pControlPacket = &target->HTCControlBuffers[i].HtcPacket;
+             INIT_HTC_PACKET_INFO(pControlPacket,
+                                  target->HTCControlBuffers[i].Buffer,
+                                  HTC_CONTROL_BUFFER_SIZE);
+             HTC_FREE_CONTROL_TX(target,pControlPacket);
+        }
+
+    } while (FALSE);
+
+    if (A_SUCCESS(status)) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" calling AddInstance callback \n"));
+            /* announce ourselves */
+        HTCInitInfo.AddInstance((HTC_HANDLE)target);
+    } else {
+        if (target != NULL) {
+            HTCCleanup(target);
+        }
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("htcTargetInserted - Exit\n"));
+
+    return status;
+}
+
+/* registered removal callback from the HIF layer */
+static A_STATUS HTCTargetRemovedHandler(void *handle, A_STATUS status)
+{
+    HTC_TARGET *target;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCTargetRemovedHandler handle:0x%X \n",(A_UINT32)handle));
+
+    if (NULL == handle) {
+            /* this could be NULL in the event that target initialization failed */
+        return A_OK;
+    }
+
+    target = ((AR6K_DEVICE *)handle)->HTCContext;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("   removing target:0x%X instance:0x%X ... \n",
+            (A_UINT32)target, (A_UINT32)target->pInstanceContext));
+
+    if (target->pInstanceContext != NULL) {
+            /* let upper layer know, it needs to call HTCStop() */
+        HTCInitInfo.DeleteInstance(target->pInstanceContext);
+    }
+
+    HIFShutDownDevice(target->Device.HIFDevice);
+
+    HTCCleanup(target);
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCTargetRemovedHandler \n"));
+    return A_OK;
+}
+
+/* get the low level HIF device for the caller , the caller may wish to do low level
+ * HIF requests */
+void *HTCGetHifDevice(HTC_HANDLE HTCHandle)
+{
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    return target->Device.HIFDevice;
+}
+
+/* set the instance block for this HTC handle, so that on removal, the blob can be
+ * returned to the caller */
+void HTCSetInstance(HTC_HANDLE HTCHandle, void *Instance)
+{
+    HTC_TARGET  *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+
+    target->pInstanceContext = Instance;
+}
+
+/* wait for the target to arrive (sends HTC Ready message)
+ * this operation is fully synchronous and the message is polled for */
+A_STATUS HTCWaitTarget(HTC_HANDLE HTCHandle)
+{
+    HTC_TARGET              *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    A_STATUS                 status;
+    HTC_PACKET              *pPacket = NULL;
+    HTC_READY_MSG           *pRdyMsg;
+    HTC_SERVICE_CONNECT_REQ  connect;
+    HTC_SERVICE_CONNECT_RESP resp;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCWaitTarget - Enter (target:0x%X) \n", (A_UINT32)target));
+
+    do {
+
+#ifdef MBOXHW_UNIT_TEST
+
+        status = DoMboxHWTest(&target->Device);
+
+        if (status != A_OK) {
+            break;
+        }
+
+#endif
+
+            /* we should be getting 1 control message that the target is ready */
+        status = HTCWaitforControlMessage(target, &pPacket);
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Target Not Available!!\n"));
+            break;
+        }
+
+            /* we controlled the buffer creation so it has to be properly aligned */
+        pRdyMsg = (HTC_READY_MSG *)pPacket->pBuffer;
+
+        if ((pRdyMsg->MessageID != HTC_MSG_READY_ID) ||
+            (pPacket->ActualLength < sizeof(HTC_READY_MSG))) {
+                /* this message is not valid */
+            AR_DEBUG_ASSERT(FALSE);
+            status = A_EPROTO;
+            break;
+        }
+
+        if (pRdyMsg->CreditCount == 0 || pRdyMsg->CreditSize == 0) {
+              /* this message is not valid */
+            AR_DEBUG_ASSERT(FALSE);
+            status = A_EPROTO;
+            break;
+        }
+
+        target->TargetCredits = pRdyMsg->CreditCount;
+        target->TargetCreditSize = pRdyMsg->CreditSize;
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" Target Ready: credits: %d credit size: %d\n",
+                target->TargetCredits, target->TargetCreditSize));
+
+            /* setup our pseudo HTC control endpoint connection */
+        A_MEMZERO(&connect,sizeof(connect));
+        A_MEMZERO(&resp,sizeof(resp));
+        connect.EpCallbacks.pContext = target;
+        connect.EpCallbacks.EpTxComplete = HTCControlTxComplete;
+        connect.EpCallbacks.EpRecv = HTCControlRecv;
+        connect.EpCallbacks.EpRecvRefill = NULL;  /* not needed */
+        connect.EpCallbacks.EpSendFull = NULL;    /* not needed */
+        connect.EpCallbacks.EpSendAvail = NULL;   /* not needed */
+        connect.MaxSendQueueDepth = NUM_CONTROL_BUFFERS;
+        connect.ServiceID = HTC_CTRL_RSVD_SVC;
+
+            /* connect fake service */
+        status = HTCConnectService((HTC_HANDLE)target,
+                                   &connect,
+                                   &resp);
+
+        if (!A_FAILED(status)) {
+            break;
+        }
+
+    } while (FALSE);
+
+    if (pPacket != NULL) {
+        HTC_FREE_CONTROL_RX(target,pPacket);
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCWaitTarget - Exit\n"));
+
+    return status;
+}
+
+
+
+/* Start HTC, enable interrupts and let the target know host has finished setup */
+A_STATUS HTCStart(HTC_HANDLE HTCHandle)
+{
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    HTC_PACKET *pPacket;
+    A_STATUS   status;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCStart Enter\n"));
+
+        /* now that we are starting, push control receive buffers into the
+         * HTC control endpoint */
+
+    while (1) {
+        pPacket = HTC_ALLOC_CONTROL_RX(target);
+        if (NULL == pPacket) {
+            break;
+        }
+        HTCAddReceivePkt((HTC_HANDLE)target,pPacket);
+    }
+
+    do {
+
+        AR_DEBUG_ASSERT(target->InitCredits != NULL);
+        AR_DEBUG_ASSERT(target->EpCreditDistributionListHead != NULL);
+        AR_DEBUG_ASSERT(target->EpCreditDistributionListHead->pNext != NULL);
+
+            /* call init credits callback to do the distribution ,
+             * NOTE: the first entry in the distribution list is ENDPOINT_0, so
+             * we pass the start of the list after this one. */
+        target->InitCredits(target->pCredDistContext,
+                            target->EpCreditDistributionListHead->pNext,
+                            target->TargetCredits);
+
+        if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_TRC)) {
+            DumpCreditDistStates(target);
+        }
+
+            /* the caller is done connecting to services, so we can indicate to the
+            * target that the setup phase is complete */
+        status = HTCSendSetupComplete(target);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* unmask interrupts */
+        status = DevUnmaskInterrupts(&target->Device);
+
+        if (A_FAILED(status)) {
+            HTCStop(target);
+        }
+
+    } while (FALSE);
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCStart Exit\n"));
+    return status;
+}
+
+
+/* stop HTC communications, i.e. stop interrupt reception, and flush all queued buffers */
+void HTCStop(HTC_HANDLE HTCHandle)
+{
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCStop \n"));
+
+        /* mark that we are shutting down .. */
+    target->HTCStateFlags |= HTC_STATE_STOPPING;
+
+        /* Masking interrupts is a synchronous operation, when this function returns
+         * all pending HIF I/O has completed, we can safely flush the queues */
+    DevMaskInterrupts(&target->Device);
+
+        /* flush all send packets */
+    HTCFlushSendPkts(target);
+        /* flush all recv buffers */
+    HTCFlushRecvBuffers(target);
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCStop \n"));
+}
+
+/* undo what was done in HTCInit() */
+void HTCShutDown(void)
+{
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCShutDown: \n"));
+    HTCInitialized = FALSE;
+        /* undo HTCInit */
+    HIFShutDownDevice(NULL);
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCShutDown: \n"));
+}
+
+void HTCDumpCreditStates(HTC_HANDLE HTCHandle)
+{
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+
+    LOCK_HTC_TX(target);
+
+    DumpCreditDistStates(target);
+
+    UNLOCK_HTC_TX(target);
+}
+
+/* report a target failure from the device, this is a callback from the device layer
+ * which uses a mechanism to report errors from the target (i.e. special interrupts) */
+static void HTCReportFailure(void *Context)
+{
+    HTC_TARGET *target = (HTC_TARGET *)Context;
+
+    target->TargetFailure = TRUE;
+
+    if ((target->pInstanceContext != NULL) && (HTCInitInfo.TargetFailure != NULL)) {
+            /* let upper layer know, it needs to call HTCStop() */
+        HTCInitInfo.TargetFailure(target->pInstanceContext, A_ERROR);
+    }
+}
+
+void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription)
+{
+    A_CHAR stream[60];
+    A_UINT32 i;
+    A_UINT16 offset, count;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<---------Dumping %d Bytes : %s ------>\n", length, pDescription));
+
+    count = 0;
+    offset = 0;
+    for(i = 0; i < length; i++) {
+        sprintf(stream + offset, "%2.2X ", buffer[i]);
+        count ++;
+        offset += 3;
+
+        if(count == 16) {
+            count = 0;
+            offset = 0;
+            AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("[H]: %s\n", stream));
+            A_MEMZERO(stream, 60);
+        }
+    }
+
+    if(offset != 0) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("[H]: %s\n", stream));
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<------------------------------------------------->\n"));
+}
+
+A_BOOL HTCGetEndpointStatistics(HTC_HANDLE               HTCHandle,
+                                HTC_ENDPOINT_ID          Endpoint,
+                                HTC_ENDPOINT_STAT_ACTION Action,
+                                HTC_ENDPOINT_STATS       *pStats)
+{
+
+#ifdef HTC_EP_STAT_PROFILING
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    A_BOOL     clearStats = FALSE;
+    A_BOOL     sample = FALSE;
+
+    switch (Action) {
+        case HTC_EP_STAT_SAMPLE :
+            sample = TRUE;
+            break;
+        case HTC_EP_STAT_SAMPLE_AND_CLEAR :
+            sample = TRUE;
+            clearStats = TRUE;
+            break;
+        case HTC_EP_STAT_CLEAR :
+            clearStats = TRUE;
+            break;
+        default:
+            break;
+    }
+
+    A_ASSERT(Endpoint < ENDPOINT_MAX);
+
+        /* lock out TX and RX while we sample and/or clear */
+    LOCK_HTC_TX(target);
+    LOCK_HTC_RX(target);
+
+    if (sample) {
+        A_ASSERT(pStats != NULL);
+            /* return the stats to the caller */
+        A_MEMCPY(pStats, &target->EndPoint[Endpoint].EndPointStats, sizeof(HTC_ENDPOINT_STATS));
+    }
+
+    if (clearStats) {
+            /* reset stats */
+        A_MEMZERO(&target->EndPoint[Endpoint].EndPointStats, sizeof(HTC_ENDPOINT_STATS));
+    }
+
+    UNLOCK_HTC_RX(target);
+    UNLOCK_HTC_TX(target);
+
+    return TRUE;
+#else
+    return FALSE;
+#endif
+}
diff --git a/drivers/ar6000/htc/htc_debug.h b/drivers/ar6000/htc/htc_debug.h
new file mode 100644
index 00000000000..08080be51a2
--- /dev/null
+++ b/drivers/ar6000/htc/htc_debug.h
@@ -0,0 +1,65 @@
+#ifndef HTC_DEBUG_H_
+#define HTC_DEBUG_H_
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/* ------- Debug related stuff ------- */
+enum {
+    ATH_DEBUG_SEND = 0x0001,
+    ATH_DEBUG_RECV = 0x0002,
+    ATH_DEBUG_SYNC = 0x0004,
+    ATH_DEBUG_DUMP = 0x0008,
+    ATH_DEBUG_IRQ  = 0x0010,
+    ATH_DEBUG_TRC  = 0x0020,
+    ATH_DEBUG_WARN = 0x0040,
+    ATH_DEBUG_ERR  = 0x0080,
+    ATH_DEBUG_ANY  = 0xFFFF,
+};
+
+#ifdef DEBUG
+
+// TODO FIX usage of A_PRINTF!
+#define AR_DEBUG_LVL_CHECK(lvl) (debughtc & (lvl))
+#define AR_DEBUG_PRINTBUF(buffer, length, desc) do {   \
+    if (debughtc & ATH_DEBUG_DUMP) {             \
+        DebugDumpBytes(buffer, length,desc);               \
+    }                                            \
+} while(0)
+#define PRINTX_ARG(arg...) arg
+#define AR_DEBUG_PRINTF(flags, args) do {        \
+    if (debughtc & (flags)) {                    \
+        A_PRINTF(KERN_ALERT PRINTX_ARG args);    \
+    }                                            \
+} while (0)
+#define AR_DEBUG_ASSERT(test) do {               \
+    if (!(test)) {                               \
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#test));         \
+    }                                            \
+} while(0)
+extern int debughtc;
+#else
+#define AR_DEBUG_PRINTF(flags, args)
+#define AR_DEBUG_PRINTBUF(buffer, length, desc)
+#define AR_DEBUG_ASSERT(test)
+#define AR_DEBUG_LVL_CHECK(lvl) 0
+#endif
+
+void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription);
+
+#endif /*HTC_DEBUG_H_*/
diff --git a/drivers/ar6000/htc/htc_internal.h b/drivers/ar6000/htc/htc_internal.h
new file mode 100644
index 00000000000..ebb8ac16ed1
--- /dev/null
+++ b/drivers/ar6000/htc/htc_internal.h
@@ -0,0 +1,168 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _HTC_INTERNAL_H_
+#define _HTC_INTERNAL_H_
+
+/* for debugging, uncomment this to capture the last frame header, on frame header
+ * processing errors, the last frame header is dump for comparison */
+//#define HTC_CAPTURE_LAST_FRAME
+
+//#define HTC_EP_STAT_PROFILING
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* Header files */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "htc.h"
+#include "htc_api.h"
+#include "bmi_msg.h"
+#include "hif.h"
+#include "ar6k.h"
+
+/* HTC operational parameters */
+#define HTC_TARGET_RESPONSE_TIMEOUT        2000 /* in ms */
+#define HTC_TARGET_DEBUG_INTR_MASK         0x01
+#define HTC_TARGET_CREDIT_INTR_MASK        0xF0
+
+typedef struct _HTC_ENDPOINT {
+    HTC_SERVICE_ID              ServiceID;      /* service ID this endpoint is bound to
+                                                   non-zero value means this endpoint is in use */
+    HTC_PACKET_QUEUE            TxQueue;        /* HTC frame buffer TX queue */
+    HTC_PACKET_QUEUE            RxBuffers;      /* HTC frame buffer RX list */
+    HTC_ENDPOINT_CREDIT_DIST    CreditDist;     /* credit distribution structure (exposed to driver layer) */
+    HTC_EP_CALLBACKS            EpCallBacks;    /* callbacks associated with this endpoint */
+    int                         MaxTxQueueDepth;   /* max depth of the TX queue before we need to
+                                                      call driver's full handler */
+    int                         CurrentTxQueueDepth; /* current TX queue depth */
+    int                         MaxMsgLength;        /* max length of endpoint message */
+#ifdef HTC_EP_STAT_PROFILING
+    HTC_ENDPOINT_STATS          EndPointStats;  /* endpoint statistics */
+#endif
+} HTC_ENDPOINT;
+
+#ifdef HTC_EP_STAT_PROFILING
+#define INC_HTC_EP_STAT(p,stat,count) (p)->EndPointStats.stat += (count);
+#else
+#define INC_HTC_EP_STAT(p,stat,count)
+#endif
+
+#define HTC_SERVICE_TX_PACKET_TAG  HTC_TX_PACKET_TAG_INTERNAL
+
+#define NUM_CONTROL_BUFFERS     8
+#define NUM_CONTROL_TX_BUFFERS  2
+#define NUM_CONTROL_RX_BUFFERS  (NUM_CONTROL_BUFFERS - NUM_CONTROL_TX_BUFFERS)
+
+#define HTC_CONTROL_BUFFER_SIZE (HTC_MAX_CONTROL_MESSAGE_LENGTH + HTC_HDR_LENGTH)
+
+typedef struct HTC_CONTROL_BUFFER {
+    HTC_PACKET    HtcPacket;
+    A_UINT8       Buffer[HTC_CONTROL_BUFFER_SIZE];
+} HTC_CONTROL_BUFFER;
+
+/* our HTC target state */
+typedef struct _HTC_TARGET {
+    HTC_ENDPOINT                EndPoint[ENDPOINT_MAX];
+    HTC_CONTROL_BUFFER          HTCControlBuffers[NUM_CONTROL_BUFFERS];
+    HTC_ENDPOINT_CREDIT_DIST   *EpCreditDistributionListHead;
+    HTC_PACKET_QUEUE            ControlBufferTXFreeList;
+    HTC_PACKET_QUEUE            ControlBufferRXFreeList;
+    HTC_CREDIT_DIST_CALLBACK    DistributeCredits;
+    HTC_CREDIT_INIT_CALLBACK    InitCredits;
+    void                       *pCredDistContext;
+    int                         TargetCredits;
+    int                         TargetCreditSize;
+    A_MUTEX_T                   HTCLock;
+    A_MUTEX_T                   HTCRxLock;
+    A_MUTEX_T                   HTCTxLock;
+    AR6K_DEVICE                 Device;         /* AR6K - specific state */
+    A_UINT32                    HTCStateFlags;
+    HTC_ENDPOINT_ID             EpWaitingForBuffers;
+    A_BOOL                      TargetFailure;
+    void                       *pInstanceContext;
+#define HTC_STATE_WAIT_BUFFERS  (1 << 0)
+#define HTC_STATE_STOPPING      (1 << 1)
+#ifdef HTC_CAPTURE_LAST_FRAME
+    HTC_FRAME_HDR               LastFrameHdr;  /* useful for debugging */
+    A_UINT8                     LastTrailer[256];
+    A_UINT8                     LastTrailerLength;
+#endif
+} HTC_TARGET;
+
+#define HTC_STOPPING(t) ((t)->HTCStateFlags & HTC_STATE_STOPPING)
+#define LOCK_HTC(t)      A_MUTEX_LOCK(&(t)->HTCLock);
+#define UNLOCK_HTC(t)    A_MUTEX_UNLOCK(&(t)->HTCLock);
+#define LOCK_HTC_RX(t)   A_MUTEX_LOCK(&(t)->HTCRxLock);
+#define UNLOCK_HTC_RX(t) A_MUTEX_UNLOCK(&(t)->HTCRxLock);
+#define LOCK_HTC_TX(t)   A_MUTEX_LOCK(&(t)->HTCTxLock);
+#define UNLOCK_HTC_TX(t) A_MUTEX_UNLOCK(&(t)->HTCTxLock);
+
+#define GET_HTC_TARGET_FROM_HANDLE(hnd) ((HTC_TARGET *)(hnd))
+#define HTC_RECYCLE_RX_PKT(target,p)                \
+{                                                   \
+    HTC_PACKET_RESET_RX(pPacket);                   \
+    HTCAddReceivePkt((HTC_HANDLE)(target),(p));     \
+}
+
+/* internal HTC functions */
+void        HTCControlTxComplete(void *Context, HTC_PACKET *pPacket);
+void        HTCControlRecv(void *Context, HTC_PACKET *pPacket);
+A_STATUS    HTCWaitforControlMessage(HTC_TARGET *target, HTC_PACKET **ppControlPacket);
+HTC_PACKET *HTCAllocControlBuffer(HTC_TARGET *target, HTC_PACKET_QUEUE *pList);
+void        HTCFreeControlBuffer(HTC_TARGET *target, HTC_PACKET *pPacket, HTC_PACKET_QUEUE *pList);
+A_STATUS    HTCIssueSend(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT8 Flags);
+A_STATUS    HTCIssueRecv(HTC_TARGET *target, HTC_PACKET *pPacket);
+void        HTCRecvCompleteHandler(void *Context, HTC_PACKET *pPacket);
+A_STATUS    HTCRecvMessagePendingHandler(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc);
+void        HTCProcessCreditRpt(HTC_TARGET *target, HTC_CREDIT_REPORT *pRpt, int NumEntries, HTC_ENDPOINT_ID FromEndpoint);
+A_STATUS    HTCSendSetupComplete(HTC_TARGET *target);
+void        HTCFlushRecvBuffers(HTC_TARGET *target);
+void        HTCFlushSendPkts(HTC_TARGET *target);
+void        DumpCreditDist(HTC_ENDPOINT_CREDIT_DIST *pEPDist);
+void        DumpCreditDistStates(HTC_TARGET *target);
+void 		DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription);
+
+static INLINE HTC_PACKET *HTC_ALLOC_CONTROL_TX(HTC_TARGET *target) {
+    HTC_PACKET *pPacket = HTCAllocControlBuffer(target,&target->ControlBufferTXFreeList);
+    if (pPacket != NULL) {
+            /* set payload pointer area with some headroom */
+        pPacket->pBuffer = pPacket->pBufferStart + HTC_HDR_LENGTH;
+    }
+    return pPacket;
+}
+
+#define HTC_FREE_CONTROL_TX(t,p) HTCFreeControlBuffer((t),(p),&(t)->ControlBufferTXFreeList)
+#define HTC_ALLOC_CONTROL_RX(t)  HTCAllocControlBuffer((t),&(t)->ControlBufferRXFreeList)
+#define HTC_FREE_CONTROL_RX(t,p) \
+{                                                                \
+    HTC_PACKET_RESET_RX(p);                                      \
+    HTCFreeControlBuffer((t),(p),&(t)->ControlBufferRXFreeList); \
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HTC_INTERNAL_H_ */
diff --git a/drivers/ar6000/htc/htc_recv.c b/drivers/ar6000/htc/htc_recv.c
new file mode 100644
index 00000000000..4be2b0833c8
--- /dev/null
+++ b/drivers/ar6000/htc/htc_recv.c
@@ -0,0 +1,703 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "htc_internal.h"
+
+#define HTCIssueRecv(t, p) \
+    DevRecvPacket(&(t)->Device,  \
+                  (p),          \
+                  (p)->ActualLength)
+
+#define DO_RCV_COMPLETION(t,p,e)            \
+{                                           \
+    if ((p)->ActualLength > 0) {            \
+        AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" completing packet 0x%X (%d bytes) on ep : %d \n", \
+            (A_UINT32)(p), (p)->ActualLength, (p)->Endpoint));  \
+        (e)->EpCallBacks.EpRecv((e)->EpCallBacks.pContext,      \
+                                (p));                           \
+    } else {                                                    \
+        AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" recycling empty packet \n"));  \
+        HTC_RECYCLE_RX_PKT((t), (p));                           \
+    }                                                           \
+}
+
+#ifdef HTC_EP_STAT_PROFILING
+#define HTC_RX_STAT_PROFILE(t,ep,lookAhead)            \
+{                                                      \
+    LOCK_HTC_RX((t));                                  \
+    INC_HTC_EP_STAT((ep), RxReceived, 1);              \
+    if ((lookAhead) != 0) {                            \
+        INC_HTC_EP_STAT((ep), RxLookAheads, 1);        \
+    }                                                  \
+    UNLOCK_HTC_RX((t));                                \
+}
+#else
+#define HTC_RX_STAT_PROFILE(t,ep,lookAhead)
+#endif
+
+static INLINE A_STATUS HTCProcessTrailer(HTC_TARGET *target,
+                                         A_UINT8    *pBuffer,
+                                         int         Length,
+                                         A_UINT32   *pNextLookAhead,
+                                         HTC_ENDPOINT_ID FromEndpoint)
+{
+    HTC_RECORD_HDR          *pRecord;
+    A_UINT8                 *pRecordBuf;
+    HTC_LOOKAHEAD_REPORT    *pLookAhead;
+    A_UINT8                 *pOrigBuffer;
+    int                     origLength;
+    A_STATUS                status;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCProcessTrailer (length:%d) \n", Length));
+
+    if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
+        AR_DEBUG_PRINTBUF(pBuffer,Length,"Recv Trailer");
+    }
+
+    pOrigBuffer = pBuffer;
+    origLength = Length;
+    status = A_OK;
+
+    while (Length > 0) {
+
+        if (Length < sizeof(HTC_RECORD_HDR)) {
+            status = A_EPROTO;
+            break;
+        }
+            /* these are byte aligned structs */
+        pRecord = (HTC_RECORD_HDR *)pBuffer;
+        Length -= sizeof(HTC_RECORD_HDR);
+        pBuffer += sizeof(HTC_RECORD_HDR);
+
+        if (pRecord->Length > Length) {
+                /* no room left in buffer for record */
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                (" invalid record length: %d (id:%d) buffer has: %d bytes left \n",
+                        pRecord->Length, pRecord->RecordID, Length));
+            status = A_EPROTO;
+            break;
+        }
+            /* start of record follows the header */
+        pRecordBuf = pBuffer;
+
+        switch (pRecord->RecordID) {
+            case HTC_RECORD_CREDITS:
+                AR_DEBUG_ASSERT(pRecord->Length >= sizeof(HTC_CREDIT_REPORT));
+                HTCProcessCreditRpt(target,
+                                    (HTC_CREDIT_REPORT *)pRecordBuf,
+                                    pRecord->Length / (sizeof(HTC_CREDIT_REPORT)),
+                                    FromEndpoint);
+                break;
+            case HTC_RECORD_LOOKAHEAD:
+                AR_DEBUG_ASSERT(pRecord->Length >= sizeof(HTC_LOOKAHEAD_REPORT));
+                pLookAhead = (HTC_LOOKAHEAD_REPORT *)pRecordBuf;
+                if ((pLookAhead->PreValid == ((~pLookAhead->PostValid) & 0xFF)) &&
+                    (pNextLookAhead != NULL)) {
+
+                    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+                                (" LookAhead Report Found (pre valid:0x%X, post valid:0x%X) \n",
+                                pLookAhead->PreValid,
+                                pLookAhead->PostValid));
+
+                        /* look ahead bytes are valid, copy them over */
+                    ((A_UINT8 *)pNextLookAhead)[0] = pLookAhead->LookAhead[0];
+                    ((A_UINT8 *)pNextLookAhead)[1] = pLookAhead->LookAhead[1];
+                    ((A_UINT8 *)pNextLookAhead)[2] = pLookAhead->LookAhead[2];
+                    ((A_UINT8 *)pNextLookAhead)[3] = pLookAhead->LookAhead[3];
+
+                    if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
+                        DebugDumpBytes((A_UINT8 *)pNextLookAhead,4,"Next Look Ahead");
+                    }
+                }
+                break;
+            default:
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" unhandled record: id:%d length:%d \n",
+                        pRecord->RecordID, pRecord->Length));
+                break;
+        }
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* advance buffer past this record for next time around */
+        pBuffer += pRecord->Length;
+        Length -= pRecord->Length;
+    }
+
+    if (A_FAILED(status)) {
+        DebugDumpBytes(pOrigBuffer,origLength,"BAD Recv Trailer");
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCProcessTrailer \n"));
+    return status;
+
+}
+
+/* process a received message (i.e. strip off header, process any trailer data)
+ * note : locks must be released when this function is called */
+static A_STATUS HTCProcessRecvHeader(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT32 *pNextLookAhead)
+{
+    A_UINT8   temp;
+    A_UINT8   *pBuf;
+    A_STATUS  status = A_OK;
+    A_UINT16  payloadLen;
+    A_UINT32  lookAhead;
+
+    pBuf = pPacket->pBuffer;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCProcessRecvHeader \n"));
+
+    if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
+        AR_DEBUG_PRINTBUF(pBuf,pPacket->ActualLength,"HTC Recv PKT");
+    }
+
+    do {
+        /* note, we cannot assume the alignment of pBuffer, so we use the safe macros to
+         * retrieve 16 bit fields */
+        payloadLen = A_GET_UINT16_FIELD(pBuf, HTC_FRAME_HDR, PayloadLen);
+
+        ((A_UINT8 *)&lookAhead)[0] = pBuf[0];
+        ((A_UINT8 *)&lookAhead)[1] = pBuf[1];
+        ((A_UINT8 *)&lookAhead)[2] = pBuf[2];
+        ((A_UINT8 *)&lookAhead)[3] = pBuf[3];
+
+        if (lookAhead != pPacket->HTCReserved) {
+            /* somehow the lookahead that gave us the full read length did not
+             * reflect the actual header in the pending message */
+             AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                    ("HTCProcessRecvHeader, lookahead mismatch! \n"));
+             DebugDumpBytes((A_UINT8 *)&pPacket->HTCReserved,4,"Expected Message LookAhead");
+             DebugDumpBytes(pBuf,sizeof(HTC_FRAME_HDR),"Current Frame Header");
+#ifdef HTC_CAPTURE_LAST_FRAME
+            DebugDumpBytes((A_UINT8 *)&target->LastFrameHdr,sizeof(HTC_FRAME_HDR),"Last Frame Header");
+            if (target->LastTrailerLength != 0) {
+                DebugDumpBytes(target->LastTrailer,
+                               target->LastTrailerLength,
+                               "Last trailer");
+            }
+#endif
+            status = A_EPROTO;
+            break;
+        }
+
+            /* get flags */
+        temp = A_GET_UINT8_FIELD(pBuf, HTC_FRAME_HDR, Flags);
+
+        if (temp & HTC_FLAGS_RECV_TRAILER) {
+            /* this packet has a trailer */
+
+                /* extract the trailer length in control byte 0 */
+            temp = A_GET_UINT8_FIELD(pBuf, HTC_FRAME_HDR, ControlBytes[0]);
+
+            if ((temp < sizeof(HTC_RECORD_HDR)) || (temp > payloadLen)) {
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                    ("HTCProcessRecvHeader, invalid header (payloadlength should be :%d, CB[0] is:%d) \n",
+                        payloadLen, temp));
+                status = A_EPROTO;
+                break;
+            }
+
+                /* process trailer data that follows HDR + application payload */
+            status = HTCProcessTrailer(target,
+                                       (pBuf + HTC_HDR_LENGTH + payloadLen - temp),
+                                       temp,
+                                       pNextLookAhead,
+                                       pPacket->Endpoint);
+
+            if (A_FAILED(status)) {
+                break;
+            }
+
+#ifdef HTC_CAPTURE_LAST_FRAME
+            A_MEMCPY(target->LastTrailer, (pBuf + HTC_HDR_LENGTH + payloadLen - temp), temp);
+            target->LastTrailerLength = temp;
+#endif
+                /* trim length by trailer bytes */
+            pPacket->ActualLength -= temp;
+        }
+#ifdef HTC_CAPTURE_LAST_FRAME
+         else {
+            target->LastTrailerLength = 0;
+        }
+#endif
+
+            /* if we get to this point, the packet is good */
+            /* remove header and adjust length */
+        pPacket->pBuffer += HTC_HDR_LENGTH;
+        pPacket->ActualLength -= HTC_HDR_LENGTH;
+
+    } while (FALSE);
+
+    if (A_FAILED(status)) {
+            /* dump the whole packet */
+        DebugDumpBytes(pBuf,pPacket->ActualLength,"BAD HTC Recv PKT");
+    } else {
+#ifdef HTC_CAPTURE_LAST_FRAME
+        A_MEMCPY(&target->LastFrameHdr,pBuf,sizeof(HTC_FRAME_HDR));
+#endif
+        if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
+            if (pPacket->ActualLength > 0) {
+                AR_DEBUG_PRINTBUF(pPacket->pBuffer,pPacket->ActualLength,"HTC - Application Msg");
+            }
+        }
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCProcessRecvHeader \n"));
+    return status;
+}
+
+/* asynchronous completion handler for recv packet fetching, when the device layer
+ * completes a read request, it will call this completion handler */
+void HTCRecvCompleteHandler(void *Context, HTC_PACKET *pPacket)
+{
+    HTC_TARGET      *target = (HTC_TARGET *)Context;
+    HTC_ENDPOINT    *pEndpoint;
+    A_UINT32        nextLookAhead = 0;
+    A_STATUS        status;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCRecvCompleteHandler (status:%d, ep:%d) \n",
+                pPacket->Status, pPacket->Endpoint));
+
+    AR_DEBUG_ASSERT(pPacket->Endpoint < ENDPOINT_MAX);
+    pEndpoint = &target->EndPoint[pPacket->Endpoint];
+    pPacket->Completion = NULL;
+
+        /* get completion status */
+    status = pPacket->Status;
+
+    do {
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HTCRecvCompleteHandler: request failed (status:%d, ep:%d) \n",
+                pPacket->Status, pPacket->Endpoint));
+            break;
+        }
+            /* process the header for any trailer data */
+        status = HTCProcessRecvHeader(target,pPacket,&nextLookAhead);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+            /* was there a lookahead for the next packet? */
+        if (nextLookAhead != 0) {
+            A_STATUS nextStatus;
+            AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+                            ("HTCRecvCompleteHandler - next look ahead was non-zero : 0x%X \n",
+                             nextLookAhead));
+                /* we have another packet, get the next packet fetch started (pipelined) before
+                 * we call into the endpoint's callback, this will start another async request */
+            nextStatus = HTCRecvMessagePendingHandler(target,nextLookAhead,NULL);
+            if (A_EPROTO == nextStatus) {
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                            ("Next look ahead from recv header was INVALID\n"));
+                DebugDumpBytes((A_UINT8 *)&nextLookAhead,
+                                4,
+                                "BAD lookahead from lookahead report");
+            }
+        } else {
+             AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+            ("HTCRecvCompleteHandler - rechecking for more messages...\n"));
+            /* if we did not get anything on the look-ahead,
+             * call device layer to asynchronously re-check for messages. If we can keep the async
+             * processing going we get better performance.  If there is a pending message we will keep processing
+             * messages asynchronously which should pipeline things nicely */
+            DevCheckPendingRecvMsgsAsync(&target->Device);
+        }
+
+        HTC_RX_STAT_PROFILE(target,pEndpoint,nextLookAhead);
+        DO_RCV_COMPLETION(target,pPacket,pEndpoint);
+
+    } while (FALSE);
+
+    if (A_FAILED(status)) {
+         AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                         ("HTCRecvCompleteHandler , message fetch failed (status = %d) \n",
+                         status));
+            /* recyle this packet */
+         HTC_RECYCLE_RX_PKT(target, pPacket);
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCRecvCompleteHandler\n"));
+}
+
+/* synchronously wait for a control message from the target,
+ * This function is used at initialization time ONLY.  At init messages
+ * on ENDPOINT 0 are expected. */
+A_STATUS HTCWaitforControlMessage(HTC_TARGET *target, HTC_PACKET **ppControlPacket)
+{
+    A_STATUS        status;
+    A_UINT32        lookAhead;
+    HTC_PACKET      *pPacket = NULL;
+    HTC_FRAME_HDR   *pHdr;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+HTCWaitforControlMessage \n"));
+
+    do  {
+
+        *ppControlPacket = NULL;
+
+            /* call the polling function to see if we have a message */
+        status = DevPollMboxMsgRecv(&target->Device,
+                                    &lookAhead,
+                                    HTC_TARGET_RESPONSE_TIMEOUT);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+                ("HTCWaitforControlMessage : lookAhead : 0x%X \n", lookAhead));
+
+            /* check the lookahead */
+        pHdr = (HTC_FRAME_HDR *)&lookAhead;
+
+        if (pHdr->EndpointID != ENDPOINT_0) {
+                /* unexpected endpoint number, should be zero */
+            AR_DEBUG_ASSERT(FALSE);
+            status = A_EPROTO;
+            break;
+        }
+
+        if (A_FAILED(status)) {
+                /* bad message */
+            AR_DEBUG_ASSERT(FALSE);
+            status = A_EPROTO;
+            break;
+        }
+
+        pPacket = HTC_ALLOC_CONTROL_RX(target);
+
+        if (pPacket == NULL) {
+            AR_DEBUG_ASSERT(FALSE);
+            status = A_NO_MEMORY;
+            break;
+        }
+
+        pPacket->HTCReserved = lookAhead;
+        pPacket->ActualLength = pHdr->PayloadLen + HTC_HDR_LENGTH;
+
+        if (pPacket->ActualLength > pPacket->BufferLength) {
+            AR_DEBUG_ASSERT(FALSE);
+            status = A_EPROTO;
+            break;
+        }
+
+            /* we want synchronous operation */
+        pPacket->Completion = NULL;
+
+            /* get the message from the device, this will block */
+        status = HTCIssueRecv(target, pPacket);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+            /* process receive header */
+        status = HTCProcessRecvHeader(target,pPacket,NULL);
+
+        pPacket->Status = status;
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                    ("HTCWaitforControlMessage, HTCProcessRecvHeader failed (status = %d) \n",
+                     status));
+            break;
+        }
+
+            /* give the caller this control message packet, they are responsible to free */
+        *ppControlPacket = pPacket;
+
+    } while (FALSE);
+
+    if (A_FAILED(status)) {
+        if (pPacket != NULL) {
+                /* cleanup buffer on error */
+            HTC_FREE_CONTROL_RX(target,pPacket);
+        }
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-HTCWaitforControlMessage \n"));
+
+    return status;
+}
+
+/* callback when device layer or lookahead report parsing detects a pending message */
+A_STATUS HTCRecvMessagePendingHandler(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc)
+{
+    HTC_TARGET      *target = (HTC_TARGET *)Context;
+    A_STATUS         status = A_OK;
+    HTC_PACKET      *pPacket = NULL;
+    HTC_FRAME_HDR   *pHdr;
+    HTC_ENDPOINT    *pEndpoint;
+    A_BOOL          asyncProc = FALSE;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+HTCRecvMessagePendingHandler LookAhead:0x%X \n",LookAhead));
+
+    if (IS_DEV_IRQ_PROCESSING_ASYNC_ALLOWED(&target->Device)) {
+            /* We use async mode to get the packets if the device layer supports it.
+             * The device layer interfaces with HIF in which HIF may have restrictions on
+             * how interrupts are processed */
+        asyncProc = TRUE;
+    }
+
+    if (pAsyncProc != NULL) {
+            /* indicate to caller how we decided to process this */
+        *pAsyncProc = asyncProc;
+    }
+
+    while (TRUE) {
+
+        pHdr = (HTC_FRAME_HDR *)&LookAhead;
+
+        if (pHdr->EndpointID >= ENDPOINT_MAX) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Invalid Endpoint in look-ahead: %d \n",pHdr->EndpointID));
+                /* invalid endpoint */
+            status = A_EPROTO;
+            break;
+        }
+
+        if (pHdr->PayloadLen > HTC_MAX_PAYLOAD_LENGTH) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Payload length %d exceeds max HTC : %d !\n",
+                    pHdr->PayloadLen, HTC_MAX_PAYLOAD_LENGTH));
+            status = A_EPROTO;
+            break;
+        }
+
+        pEndpoint = &target->EndPoint[pHdr->EndpointID];
+
+        if (0 == pEndpoint->ServiceID) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Endpoint %d is not connected !\n",pHdr->EndpointID));
+                /* endpoint isn't even connected */
+            status = A_EPROTO;
+            break;
+        }
+
+            /* lock RX to get a buffer */
+        LOCK_HTC_RX(target);
+
+            /* get a packet from the endpoint recv queue */
+        pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
+
+        if (NULL == pPacket) {
+                /* check for refill handler */
+            if (pEndpoint->EpCallBacks.EpRecvRefill != NULL) {
+                UNLOCK_HTC_RX(target);
+                    /* call the re-fill handler */
+                pEndpoint->EpCallBacks.EpRecvRefill(pEndpoint->EpCallBacks.pContext,
+                                                    pHdr->EndpointID);
+                LOCK_HTC_RX(target);
+                    /* check if we have more buffers */
+                pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
+                    /* fall through */
+            }
+        }
+
+        if (NULL == pPacket) {
+                /* this is not an error, we simply need to mark that we are waiting for buffers.*/
+            target->HTCStateFlags |= HTC_STATE_WAIT_BUFFERS;
+            target->EpWaitingForBuffers = pHdr->EndpointID;
+            status = A_NO_MEMORY;
+        }
+
+        UNLOCK_HTC_RX(target);
+
+        if (A_FAILED(status)) {
+                /* no buffers */
+            break;
+        }
+
+        AR_DEBUG_ASSERT(pPacket->Endpoint == pHdr->EndpointID);
+
+            /* make sure this message can fit in the endpoint buffer */
+        if ((pHdr->PayloadLen + HTC_HDR_LENGTH) > pPacket->BufferLength) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                    ("Payload Length Error : header reports payload of: %d, endpoint buffer size: %d \n",
+                    pHdr->PayloadLen, pPacket->BufferLength));
+            status = A_EPROTO;
+            break;
+        }
+
+        pPacket->HTCReserved = LookAhead; /* set expected look ahead */
+            /* set the amount of data to fetch */
+        pPacket->ActualLength = pHdr->PayloadLen + HTC_HDR_LENGTH;
+
+        if (asyncProc) {
+                /* we use async mode to get the packet if the device layer supports it
+                 * set our callback and context */
+            pPacket->Completion = HTCRecvCompleteHandler;
+            pPacket->pContext = target;
+        } else {
+                /* fully synchronous */
+            pPacket->Completion = NULL;
+        }
+
+            /* go fetch the packet */
+        status = HTCIssueRecv(target, pPacket);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        if (asyncProc) {
+                /* we did this asynchronously so we can get out of the loop, the asynch processing
+                 * creates a chain of requests to continue processing pending messages in the
+                 * context of callbacks  */
+            break;
+        }
+
+            /* in the sync case, we process the packet, check lookaheads and then repeat */
+
+        LookAhead = 0;
+        status = HTCProcessRecvHeader(target,pPacket,&LookAhead);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        HTC_RX_STAT_PROFILE(target,pEndpoint,LookAhead);
+        DO_RCV_COMPLETION(target,pPacket,pEndpoint);
+
+        pPacket = NULL;
+
+        if (0 == LookAhead) {
+            break;
+        }
+
+    }
+
+    if (A_NO_MEMORY == status) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                (" Endpoint :%d has no buffers, blocking receiver to prevent overrun.. \n",
+                pHdr->EndpointID));
+            /* try to stop receive at the device layer */
+        DevStopRecv(&target->Device, asyncProc ? DEV_STOP_RECV_ASYNC : DEV_STOP_RECV_SYNC);
+        status = A_OK;
+    } else if (A_FAILED(status)) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                        ("Failed to get pending message : LookAhead Value: 0x%X (status = %d) \n",
+                        LookAhead, status));
+        if (pPacket != NULL) {
+                /* clean up packet on error */
+            HTC_RECYCLE_RX_PKT(target, pPacket);
+        }
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-HTCRecvMessagePendingHandler \n"));
+
+    return status;
+}
+
+/* Makes a buffer available to the HTC module */
+A_STATUS HTCAddReceivePkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket)
+{
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    HTC_ENDPOINT *pEndpoint;
+    A_BOOL       unblockRecv = FALSE;
+    A_STATUS     status = A_OK;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+                    ("+- HTCAddReceivePkt: endPointId: %d, buffer: 0x%X, length: %d\n",
+                    pPacket->Endpoint, (A_UINT32)pPacket->pBuffer, pPacket->BufferLength));
+
+    do {
+
+        if (HTC_STOPPING(target)) {
+            status = A_ECANCELED;
+            break;
+        }
+
+        AR_DEBUG_ASSERT(pPacket->Endpoint < ENDPOINT_MAX);
+
+        pEndpoint = &target->EndPoint[pPacket->Endpoint];
+
+        LOCK_HTC_RX(target);
+
+            /* store receive packet */
+        HTC_PACKET_ENQUEUE(&pEndpoint->RxBuffers, pPacket);
+
+            /* check if we are blocked waiting for a new buffer */
+        if (target->HTCStateFlags & HTC_STATE_WAIT_BUFFERS) {
+            if (target->EpWaitingForBuffers == pPacket->Endpoint) {
+                AR_DEBUG_PRINTF(ATH_DEBUG_RECV,(" receiver was blocked on ep:%d, unblocking.. \n",
+                    target->EpWaitingForBuffers));
+                target->HTCStateFlags &= ~HTC_STATE_WAIT_BUFFERS;
+                target->EpWaitingForBuffers = ENDPOINT_MAX;
+                unblockRecv = TRUE;
+            }
+        }
+
+        UNLOCK_HTC_RX(target);
+
+        if (unblockRecv && !HTC_STOPPING(target)) {
+                /* TODO : implement a buffer threshold count? */
+            DevEnableRecv(&target->Device,DEV_ENABLE_RECV_SYNC);
+        }
+
+    } while (FALSE);
+
+    return status;
+}
+
+static void HTCFlushEndpointRX(HTC_TARGET *target, HTC_ENDPOINT *pEndpoint)
+{
+    HTC_PACKET  *pPacket;
+
+    LOCK_HTC_RX(target);
+
+    while (1) {
+        pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
+        if (NULL == pPacket) {
+            break;
+        }
+        UNLOCK_HTC_RX(target);
+        pPacket->Status = A_ECANCELED;
+        pPacket->ActualLength = 0;
+        AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("  Flushing RX packet:0x%X, length:%d, ep:%d \n",
+                (A_UINT32)pPacket, pPacket->BufferLength, pPacket->Endpoint));
+            /* give the packet back */
+        pEndpoint->EpCallBacks.EpRecv(pEndpoint->EpCallBacks.pContext,
+                                      pPacket);
+        LOCK_HTC_RX(target);
+    }
+
+    UNLOCK_HTC_RX(target);
+
+
+}
+
+void HTCFlushRecvBuffers(HTC_TARGET *target)
+{
+    HTC_ENDPOINT    *pEndpoint;
+    int             i;
+
+        /* NOTE: no need to flush endpoint 0, these buffers were
+         * allocated as part of the HTC struct */
+    for (i = ENDPOINT_1; i < ENDPOINT_MAX; i++) {
+        pEndpoint = &target->EndPoint[i];
+        if (pEndpoint->ServiceID == 0) {
+                /* not in use.. */
+            continue;
+        }
+        HTCFlushEndpointRX(target,pEndpoint);
+    }
+
+
+}
+
+
diff --git a/drivers/ar6000/htc/htc_send.c b/drivers/ar6000/htc/htc_send.c
new file mode 100644
index 00000000000..cf0dabef472
--- /dev/null
+++ b/drivers/ar6000/htc/htc_send.c
@@ -0,0 +1,538 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "htc_internal.h"
+
+#define DO_EP_TX_COMPLETION(ep,p)                                    \
+{                                                                    \
+    (p)->Completion = NULL;                                          \
+    (ep)->EpCallBacks.EpTxComplete((ep)->EpCallBacks.pContext,(p));  \
+}
+
+
+/* call the distribute credits callback with the distribution */
+#define DO_DISTRIBUTION(t,reason,description,pList) \
+{                                             \
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,           \
+        ("  calling distribute function (%s) (dfn:0x%X, ctxt:0x%X, dist:0x%X) \n", \
+                (description),                                           \
+                (A_UINT32)(t)->DistributeCredits,                        \
+                (A_UINT32)(t)->pCredDistContext,                         \
+                (A_UINT32)pList));                                       \
+    (t)->DistributeCredits((t)->pCredDistContext,                        \
+                           (pList),                                      \
+                           (reason));                                    \
+}
+
+/* our internal send packet completion handler when packets are submited to the AR6K device
+ * layer */
+static void HTCSendPktCompletionHandler(void *Context, HTC_PACKET *pPacket)
+{
+    HTC_TARGET      *target = (HTC_TARGET *)Context;
+    HTC_ENDPOINT    *pEndpoint = &target->EndPoint[pPacket->Endpoint];
+
+
+    if (A_FAILED(pPacket->Status)) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+            ("HTCSendPktCompletionHandler: request failed (status:%d, ep:%d) \n",
+                pPacket->Status, pPacket->Endpoint));
+    }
+        /* first, fixup the head room we allocated */
+    pPacket->pBuffer += HTC_HDR_LENGTH;
+        /* do completion */
+    DO_EP_TX_COMPLETION(pEndpoint,pPacket);
+}
+
+A_STATUS HTCIssueSend(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT8 SendFlags)
+{
+    A_STATUS status;
+    A_UINT8 *pHdrBuf;
+    A_BOOL   sync = FALSE;
+
+        /* caller always provides headrooom */
+    pPacket->pBuffer -= HTC_HDR_LENGTH;
+    pHdrBuf = pPacket->pBuffer;
+        /* setup frame header */
+    A_SET_UINT16_FIELD(pHdrBuf,HTC_FRAME_HDR,PayloadLen,(A_UINT16)pPacket->ActualLength);
+    A_SET_UINT8_FIELD(pHdrBuf,HTC_FRAME_HDR,Flags,SendFlags);
+    A_SET_UINT8_FIELD(pHdrBuf,HTC_FRAME_HDR,EndpointID, (A_UINT8)pPacket->Endpoint);
+
+    if (pPacket->Completion == NULL) {
+            /* mark that this request was synchronously issued */
+        sync = TRUE;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+                    ("+-HTCIssueSend: transmit length : %d (%s) \n",
+                    pPacket->ActualLength + HTC_HDR_LENGTH,
+                    sync ? "SYNC" : "ASYNC" ));
+
+        /* send message to device */
+    status = DevSendPacket(&target->Device,
+                           pPacket,
+                           pPacket->ActualLength + HTC_HDR_LENGTH);
+
+    if (sync) {
+            /* use local sync variable.  If this was issued asynchronously, pPacket is no longer
+             * safe to access. */
+        pPacket->pBuffer += HTC_HDR_LENGTH;
+    }
+
+    /* if this request was asynchronous, the packet completion routine will be invoked by
+     * the device layer when the HIF layer completes the request */
+
+    return status;
+}
+
+/* try to send the current packet or a packet at the head of the TX queue,
+ * if there are no credits, the packet remains in the queue. */
+static void HTCTrySend(HTC_TARGET      *target,
+                       HTC_PACKET      *pPacketToSend,
+                       HTC_ENDPOINT_ID ep)
+{
+    HTC_PACKET   *pPacket;
+    HTC_ENDPOINT *pEndpoint;
+    int          creditsRequired;
+    A_UINT8      sendFlags;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,("+HTCTrySend (pPkt:0x%X)\n",(A_UINT32)pPacketToSend));
+
+    pEndpoint = &target->EndPoint[ep];
+
+    LOCK_HTC_TX(target);
+
+    if (pPacketToSend != NULL) {
+        /* caller supplied us a packet to queue to the tail of the HTC TX queue before
+         * we check the tx queue */
+        HTC_PACKET_ENQUEUE(&pEndpoint->TxQueue,pPacketToSend);
+        pEndpoint->CurrentTxQueueDepth++;
+    }
+
+        /* now drain the TX queue for transmission as long as we have enough
+         * credits */
+
+    while (1) {
+
+        if (HTC_QUEUE_EMPTY(&pEndpoint->TxQueue)) {
+                /* nothing in the queue */
+            break;
+        }
+
+        sendFlags = 0;
+
+            /* get packet at head, but don't remove it */
+        pPacket = HTC_GET_PKT_AT_HEAD(&pEndpoint->TxQueue);
+        AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Got head packet:0x%X , Queue Depth: %d\n",
+                (A_UINT32)pPacket, pEndpoint->CurrentTxQueueDepth));
+
+            /* figure out how many credits this message requires */
+        creditsRequired  = pPacket->ActualLength + HTC_HDR_LENGTH;
+        creditsRequired += target->TargetCreditSize - 1;
+        creditsRequired /= target->TargetCreditSize;
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Creds Required:%d   Got:%d\n",
+                            creditsRequired, pEndpoint->CreditDist.TxCredits));
+
+        if (pEndpoint->CreditDist.TxCredits < creditsRequired) {
+
+            /* not enough credits */
+
+            if (pPacket->Endpoint == ENDPOINT_0) {
+                    /* leave it in the queue */
+                break;
+            }
+                /* invoke the registered distribution function only if this is not
+                 * endpoint 0, we let the driver layer provide more credits if it can.
+                 * We pass the credit distribution list starting at the endpoint in question
+                 * */
+
+                /* set how many credits we need  */
+            pEndpoint->CreditDist.TxCreditsSeek =
+                                    creditsRequired - pEndpoint->CreditDist.TxCredits;
+            DO_DISTRIBUTION(target,
+                            HTC_CREDIT_DIST_SEEK_CREDITS,
+                            "Seek Credits",
+                            &pEndpoint->CreditDist);
+
+            pEndpoint->CreditDist.TxCreditsSeek = 0;
+
+            if (pEndpoint->CreditDist.TxCredits < creditsRequired) {
+                    /* still not enough credits to send, leave packet in the queue */
+                AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+                    (" Not enough credits for ep %d leaving packet in queue..\n",
+                    pPacket->Endpoint));
+                break;
+            }
+
+        }
+
+        pEndpoint->CreditDist.TxCredits -= creditsRequired;
+        INC_HTC_EP_STAT(pEndpoint, TxCreditsConsummed, creditsRequired);
+
+            /* check if we need credits */
+        if (pEndpoint->CreditDist.TxCredits < pEndpoint->CreditDist.TxCreditsPerMaxMsg) {
+            sendFlags |= HTC_FLAGS_NEED_CREDIT_UPDATE;
+            INC_HTC_EP_STAT(pEndpoint, TxCreditLowIndications, 1);
+            AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Host Needs Credits  \n"));
+        }
+
+            /* now we can fully dequeue */
+        pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->TxQueue);
+        pEndpoint->CurrentTxQueueDepth--;
+
+        INC_HTC_EP_STAT(pEndpoint, TxIssued, 1);
+
+        UNLOCK_HTC_TX(target);
+
+        HTCIssueSend(target, pPacket, sendFlags);
+
+        LOCK_HTC_TX(target);
+
+        /* go back and check for more messages */
+    }
+
+    if (pEndpoint->CurrentTxQueueDepth >= pEndpoint->MaxTxQueueDepth) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Endpoint %d, TX queue is full, Depth:%d, Max:%d \n",
+                        ep, pEndpoint->CurrentTxQueueDepth, pEndpoint->MaxTxQueueDepth));
+        UNLOCK_HTC_TX(target);
+            /* queue is now full, let caller know */
+        if (pEndpoint->EpCallBacks.EpSendFull != NULL) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Calling driver's send full callback.... \n"));
+            pEndpoint->EpCallBacks.EpSendFull(pEndpoint->EpCallBacks.pContext, ep);
+        }
+    } else {
+        UNLOCK_HTC_TX(target);
+            /* queue is now available for new packet, let caller know */
+        if (pEndpoint->EpCallBacks.EpSendAvail)
+            pEndpoint->EpCallBacks.EpSendAvail(pEndpoint->EpCallBacks.pContext, ep);
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,("-HTCTrySend:  \n"));
+}
+
+/* HTC API - HTCSendPkt */
+A_STATUS HTCSendPkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket)
+{
+    HTC_TARGET      *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    HTC_ENDPOINT    *pEndpoint;
+    HTC_ENDPOINT_ID ep;
+    A_STATUS        status = A_OK;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+                    ("+HTCSendPkt: Enter endPointId: %d, buffer: 0x%X, length: %d \n",
+                    pPacket->Endpoint, (A_UINT32)pPacket->pBuffer, pPacket->ActualLength));
+
+    ep = pPacket->Endpoint;
+    AR_DEBUG_ASSERT(ep < ENDPOINT_MAX);
+    pEndpoint = &target->EndPoint[ep];
+
+    do {
+
+        if (HTC_STOPPING(target)) {
+            status = A_ECANCELED;
+            pPacket->Status = status;
+            DO_EP_TX_COMPLETION(pEndpoint,pPacket);
+            break;
+        }
+            /* everything sent through this interface is asynchronous */
+            /* fill in HTC completion routines */
+        pPacket->Completion = HTCSendPktCompletionHandler;
+        pPacket->pContext = target;
+
+        HTCTrySend(target, pPacket, ep);
+
+    } while (FALSE);
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCSendPkt \n"));
+
+    return status;
+}
+
+
+/* check TX queues to drain because of credit distribution update */
+static INLINE void HTCCheckEndpointTxQueues(HTC_TARGET *target)
+{
+    HTC_ENDPOINT                *pEndpoint;
+    HTC_ENDPOINT_CREDIT_DIST    *pDistItem;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("+HTCCheckEndpointTxQueues \n"));
+    pDistItem = target->EpCreditDistributionListHead;
+
+        /* run through the credit distribution list to see
+         * if there are packets queued
+         * NOTE: no locks need to be taken since the distribution list
+         * is not dynamic (cannot be re-ordered) and we are not modifying any state */
+    while (pDistItem != NULL) {
+        pEndpoint = (HTC_ENDPOINT *)pDistItem->pHTCReserved;
+
+        if (pEndpoint->CurrentTxQueueDepth > 0) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Ep %d has %d credits and %d Packets in TX Queue \n",
+                    pDistItem->Endpoint, pEndpoint->CreditDist.TxCredits, pEndpoint->CurrentTxQueueDepth));
+                /* try to start the stalled queue, this list is ordered by priority.
+                 * Highest priority queue get's processed first, if there are credits available the
+                 * highest priority queue will get a chance to reclaim credits from lower priority
+                 * ones */
+            HTCTrySend(target, NULL, pDistItem->Endpoint);
+        }
+
+        pDistItem = pDistItem->pNext;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCCheckEndpointTxQueues \n"));
+}
+
+/* process credit reports and call distribution function */
+void HTCProcessCreditRpt(HTC_TARGET *target, HTC_CREDIT_REPORT *pRpt, int NumEntries, HTC_ENDPOINT_ID FromEndpoint)
+{
+    int             i;
+    HTC_ENDPOINT    *pEndpoint;
+    int             totalCredits = 0;
+    A_BOOL          doDist = FALSE;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("+HTCProcessCreditRpt, Credit Report Entries:%d \n", NumEntries));
+
+        /* lock out TX while we update credits */
+    LOCK_HTC_TX(target);
+
+    for (i = 0; i < NumEntries; i++, pRpt++) {
+        if (pRpt->EndpointID >= ENDPOINT_MAX) {
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+        pEndpoint = &target->EndPoint[pRpt->EndpointID];
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("  Endpoint %d got %d credits \n",
+                pRpt->EndpointID, pRpt->Credits));
+
+
+#ifdef HTC_EP_STAT_PROFILING
+
+        INC_HTC_EP_STAT(pEndpoint, TxCreditRpts, 1);
+        INC_HTC_EP_STAT(pEndpoint, TxCreditsReturned, pRpt->Credits);
+
+        if (FromEndpoint == pRpt->EndpointID) {
+                /* this credit report arrived on the same endpoint indicating it arrived in an RX
+                 * packet */
+            INC_HTC_EP_STAT(pEndpoint, TxCreditsFromRx, pRpt->Credits);
+            INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromRx, 1);
+        } else if (FromEndpoint == ENDPOINT_0) {
+                /* this credit arrived on endpoint 0 as a NULL message */
+            INC_HTC_EP_STAT(pEndpoint, TxCreditsFromEp0, pRpt->Credits);
+            INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromEp0, 1);
+        } else {
+                /* arrived on another endpoint */
+            INC_HTC_EP_STAT(pEndpoint, TxCreditsFromOther, pRpt->Credits);
+            INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromOther, 1);
+        }
+
+#endif
+
+        if (ENDPOINT_0 == pRpt->EndpointID) {
+                /* always give endpoint 0 credits back */
+            pEndpoint->CreditDist.TxCredits += pRpt->Credits;
+        } else {
+                /* for all other endpoints, update credits to distribute, the distribution function
+                 * will handle giving out credits back to the endpoints */
+            pEndpoint->CreditDist.TxCreditsToDist += pRpt->Credits;
+                /* flag that we have to do the distribution */
+            doDist = TRUE;
+        }
+
+        totalCredits += pRpt->Credits;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("  Report indicated %d credits to distribute \n", totalCredits));
+
+    if (doDist) {
+            /* this was a credit return based on a completed send operations
+             * note, this is done with the lock held */
+        DO_DISTRIBUTION(target,
+                        HTC_CREDIT_DIST_SEND_COMPLETE,
+                        "Send Complete",
+                        target->EpCreditDistributionListHead->pNext);
+    }
+
+    UNLOCK_HTC_TX(target);
+
+    if (totalCredits) {
+        HTCCheckEndpointTxQueues(target);
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCProcessCreditRpt \n"));
+}
+
+/* flush endpoint TX queue */
+static void HTCFlushEndpointTX(HTC_TARGET *target, HTC_ENDPOINT *pEndpoint, HTC_TX_TAG Tag)
+{
+    HTC_PACKET          *pPacket;
+    HTC_PACKET_QUEUE    discardQueue;
+
+        /* initialize the discard queue */
+    INIT_HTC_PACKET_QUEUE(&discardQueue);
+
+    LOCK_HTC_TX(target);
+
+        /* interate from the front of the TX queue and flush out packets */
+    ITERATE_OVER_LIST_ALLOW_REMOVE(&pEndpoint->TxQueue, pPacket, HTC_PACKET, ListLink) {
+
+            /* check for removal */
+        if ((HTC_TX_PACKET_TAG_ALL == Tag) || (Tag == pPacket->PktInfo.AsTx.Tag)) {
+                /* remove from queue */
+            HTC_PACKET_REMOVE(pPacket);
+                /* add it to the discard pile */
+            HTC_PACKET_ENQUEUE(&discardQueue, pPacket);
+            pEndpoint->CurrentTxQueueDepth--;
+        }
+
+    } ITERATE_END;
+
+    UNLOCK_HTC_TX(target);
+
+        /* empty the discard queue */
+    while (1) {
+        pPacket = HTC_PACKET_DEQUEUE(&discardQueue);
+        if (NULL == pPacket) {
+            break;
+        }
+        pPacket->Status = A_ECANCELED;
+        AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("  Flushing TX packet:0x%X, length:%d, ep:%d tag:0x%X \n",
+                (A_UINT32)pPacket, pPacket->ActualLength, pPacket->Endpoint, pPacket->PktInfo.AsTx.Tag));
+        DO_EP_TX_COMPLETION(pEndpoint,pPacket);
+    }
+
+}
+
+void DumpCreditDist(HTC_ENDPOINT_CREDIT_DIST *pEPDist)
+{
+#ifdef DEBUG
+    HTC_ENDPOINT *pEndpoint = (HTC_ENDPOINT *)pEPDist->pHTCReserved;
+#endif
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("--- EP : %d  ServiceID: 0x%X    --------------\n",
+                        pEPDist->Endpoint, pEPDist->ServiceID));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" this:0x%X next:0x%X prev:0x%X\n",
+                (A_UINT32)pEPDist, (A_UINT32)pEPDist->pNext, (A_UINT32)pEPDist->pPrev));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" DistFlags          : 0x%X \n", pEPDist->DistFlags));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsNorm      : %d \n", pEPDist->TxCreditsNorm));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsMin       : %d \n", pEPDist->TxCreditsMin));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCredits          : %d \n", pEPDist->TxCredits));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsAssigned  : %d \n", pEPDist->TxCreditsAssigned));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsSeek      : %d \n", pEPDist->TxCreditsSeek));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditSize       : %d \n", pEPDist->TxCreditSize));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsPerMaxMsg : %d \n", pEPDist->TxCreditsPerMaxMsg));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsToDist    : %d \n", pEPDist->TxCreditsToDist));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxQueueDepth       : %d \n", pEndpoint->CurrentTxQueueDepth));
+    AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("----------------------------------------------------\n"));
+}
+
+void DumpCreditDistStates(HTC_TARGET *target)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pEPList = target->EpCreditDistributionListHead;
+
+    while (pEPList != NULL) {
+        DumpCreditDist(pEPList);
+        pEPList = pEPList->pNext;
+    }
+
+    if (target->DistributeCredits != NULL) {
+        DO_DISTRIBUTION(target,
+                        HTC_DUMP_CREDIT_STATE,
+                        "Dump State",
+                        NULL);
+    }
+}
+
+/* flush all send packets from all endpoint queues */
+void HTCFlushSendPkts(HTC_TARGET *target)
+{
+    HTC_ENDPOINT    *pEndpoint;
+    int             i;
+
+    DumpCreditDistStates(target);
+
+    for (i = ENDPOINT_0; i < ENDPOINT_MAX; i++) {
+        pEndpoint = &target->EndPoint[i];
+        if (pEndpoint->ServiceID == 0) {
+                /* not in use.. */
+            continue;
+        }
+        HTCFlushEndpointTX(target,pEndpoint,HTC_TX_PACKET_TAG_ALL);
+    }
+
+}
+
+/* HTC API to flush an endpoint's TX queue*/
+void HTCFlushEndpoint(HTC_HANDLE HTCHandle, HTC_ENDPOINT_ID Endpoint, HTC_TX_TAG Tag)
+{
+    HTC_TARGET      *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    HTC_ENDPOINT    *pEndpoint = &target->EndPoint[Endpoint];
+
+    if (pEndpoint->ServiceID == 0) {
+        AR_DEBUG_ASSERT(FALSE);
+        /* not in use.. */
+        return;
+    }
+
+    HTCFlushEndpointTX(target, pEndpoint, Tag);
+}
+
+/* HTC API to indicate activity to the credit distribution function */
+void HTCIndicateActivityChange(HTC_HANDLE      HTCHandle,
+                               HTC_ENDPOINT_ID Endpoint,
+                               A_BOOL          Active)
+{
+    HTC_TARGET      *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    HTC_ENDPOINT    *pEndpoint = &target->EndPoint[Endpoint];
+    A_BOOL          doDist = FALSE;
+
+    if (pEndpoint->ServiceID == 0) {
+        AR_DEBUG_ASSERT(FALSE);
+        /* not in use.. */
+        return;
+    }
+
+    LOCK_HTC_TX(target);
+
+    if (Active) {
+        if (!(pEndpoint->CreditDist.DistFlags & HTC_EP_ACTIVE)) {
+                /* mark active now */
+            pEndpoint->CreditDist.DistFlags |= HTC_EP_ACTIVE;
+            doDist = TRUE;
+        }
+    } else {
+        if (pEndpoint->CreditDist.DistFlags & HTC_EP_ACTIVE) {
+                /* mark inactive now */
+            pEndpoint->CreditDist.DistFlags &= ~HTC_EP_ACTIVE;
+            doDist = TRUE;
+        }
+    }
+
+    if (doDist) {
+        /* do distribution again based on activity change
+         * note, this is done with the lock held */
+        DO_DISTRIBUTION(target,
+                        HTC_CREDIT_DIST_ACTIVITY_CHANGE,
+                        "Activity Change",
+                        target->EpCreditDistributionListHead->pNext);
+    }
+
+    UNLOCK_HTC_TX(target);
+
+}
diff --git a/drivers/ar6000/htc/htc_services.c b/drivers/ar6000/htc/htc_services.c
new file mode 100644
index 00000000000..e5d50d16ddc
--- /dev/null
+++ b/drivers/ar6000/htc/htc_services.c
@@ -0,0 +1,403 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "htc_internal.h"
+
+void HTCControlTxComplete(void *Context, HTC_PACKET *pPacket)
+{
+        /* not implemented
+         * we do not send control TX frames during normal runtime, only during setup  */
+    AR_DEBUG_ASSERT(FALSE);
+}
+
+    /* callback when a control message arrives on this endpoint */
+void HTCControlRecv(void *Context, HTC_PACKET *pPacket)
+{
+    AR_DEBUG_ASSERT(pPacket->Endpoint == ENDPOINT_0);
+
+        /* the only control messages we are expecting are NULL messages (credit resports), which should
+         * never get here */
+    AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                    ("HTCControlRecv, got message with length:%d \n",
+                    pPacket->ActualLength + HTC_HDR_LENGTH));
+
+        /* dump header and message */
+    DebugDumpBytes(pPacket->pBuffer - HTC_HDR_LENGTH,
+                   pPacket->ActualLength + HTC_HDR_LENGTH,
+                   "Unexpected ENDPOINT 0 Message");
+
+    HTC_RECYCLE_RX_PKT((HTC_TARGET*)Context,pPacket);
+}
+
+A_STATUS HTCSendSetupComplete(HTC_TARGET *target)
+{
+    HTC_PACKET             *pSendPacket = NULL;
+    A_STATUS                status;
+    HTC_SETUP_COMPLETE_MSG *pSetupComplete;
+
+    do {
+           /* allocate a packet to send to the target */
+        pSendPacket = HTC_ALLOC_CONTROL_TX(target);
+
+        if (NULL == pSendPacket) {
+            status = A_NO_MEMORY;
+            break;
+        }
+
+            /* assemble setup complete message */
+        pSetupComplete = (HTC_SETUP_COMPLETE_MSG *)pSendPacket->pBuffer;
+        A_MEMZERO(pSetupComplete,sizeof(HTC_SETUP_COMPLETE_MSG));
+        pSetupComplete->MessageID = HTC_MSG_SETUP_COMPLETE_ID;
+
+        SET_HTC_PACKET_INFO_TX(pSendPacket,
+                               NULL,
+                               (A_UINT8 *)pSetupComplete,
+                               sizeof(HTC_SETUP_COMPLETE_MSG),
+                               ENDPOINT_0,
+                               HTC_SERVICE_TX_PACKET_TAG);
+
+            /* we want synchronous operation */
+        pSendPacket->Completion = NULL;
+            /* send the message */
+        status = HTCIssueSend(target,pSendPacket,0);
+
+    } while (FALSE);
+
+    if (pSendPacket != NULL) {
+        HTC_FREE_CONTROL_TX(target,pSendPacket);
+    }
+
+    return status;
+}
+
+
+A_STATUS HTCConnectService(HTC_HANDLE               HTCHandle,
+                           HTC_SERVICE_CONNECT_REQ  *pConnectReq,
+                           HTC_SERVICE_CONNECT_RESP *pConnectResp)
+{
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    A_STATUS                            status = A_OK;
+    HTC_PACKET                          *pRecvPacket = NULL;
+    HTC_PACKET                          *pSendPacket = NULL;
+    HTC_CONNECT_SERVICE_RESPONSE_MSG    *pResponseMsg;
+    HTC_CONNECT_SERVICE_MSG             *pConnectMsg;
+    HTC_ENDPOINT_ID                     assignedEndpoint = ENDPOINT_MAX;
+    HTC_ENDPOINT                        *pEndpoint;
+    int                                 maxMsgSize = 0;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCConnectService, target:0x%X SvcID:0x%X \n",
+               (A_UINT32)target, pConnectReq->ServiceID));
+
+    do {
+
+        AR_DEBUG_ASSERT(pConnectReq->ServiceID != 0);
+
+        if (HTC_CTRL_RSVD_SVC == pConnectReq->ServiceID) {
+                /* special case for pseudo control service */
+            assignedEndpoint = ENDPOINT_0;
+            maxMsgSize = HTC_MAX_CONTROL_MESSAGE_LENGTH;
+        } else {
+                /* allocate a packet to send to the target */
+            pSendPacket = HTC_ALLOC_CONTROL_TX(target);
+
+            if (NULL == pSendPacket) {
+                AR_DEBUG_ASSERT(FALSE);
+                status = A_NO_MEMORY;
+                break;
+            }
+                /* assemble connect service message */
+            pConnectMsg = (HTC_CONNECT_SERVICE_MSG *)pSendPacket->pBuffer;
+            AR_DEBUG_ASSERT(pConnectMsg != NULL);
+            A_MEMZERO(pConnectMsg,sizeof(HTC_CONNECT_SERVICE_MSG));
+            pConnectMsg->MessageID = HTC_MSG_CONNECT_SERVICE_ID;
+            pConnectMsg->ServiceID = pConnectReq->ServiceID;
+            pConnectMsg->ConnectionFlags = pConnectReq->ConnectionFlags;
+                /* check caller if it wants to transfer meta data */
+            if ((pConnectReq->pMetaData != NULL) &&
+                (pConnectReq->MetaDataLength <= HTC_SERVICE_META_DATA_MAX_LENGTH)) {
+                    /* copy meta data into message buffer (after header ) */
+                A_MEMCPY((A_UINT8 *)pConnectMsg + sizeof(HTC_CONNECT_SERVICE_MSG),
+                         pConnectReq->pMetaData,
+                         pConnectReq->MetaDataLength);
+                pConnectMsg->ServiceMetaLength = pConnectReq->MetaDataLength;
+            }
+
+            SET_HTC_PACKET_INFO_TX(pSendPacket,
+                                   NULL,
+                                   (A_UINT8 *)pConnectMsg,
+                                   sizeof(HTC_CONNECT_SERVICE_MSG) + pConnectMsg->ServiceMetaLength,
+                                   ENDPOINT_0,
+                                   HTC_SERVICE_TX_PACKET_TAG);
+
+                /* we want synchronous operation */
+            pSendPacket->Completion = NULL;
+
+            status = HTCIssueSend(target,pSendPacket,0);
+
+            if (A_FAILED(status)) {
+                break;
+            }
+
+                /* wait for response */
+            status = HTCWaitforControlMessage(target, &pRecvPacket);
+
+            if (A_FAILED(status)) {
+                break;
+            }
+                /* we controlled the buffer creation so it has to be properly aligned */
+            pResponseMsg = (HTC_CONNECT_SERVICE_RESPONSE_MSG *)pRecvPacket->pBuffer;
+
+            if ((pResponseMsg->MessageID != HTC_MSG_CONNECT_SERVICE_RESPONSE_ID) ||
+                (pRecvPacket->ActualLength < sizeof(HTC_CONNECT_SERVICE_RESPONSE_MSG))) {
+                    /* this message is not valid */
+                AR_DEBUG_ASSERT(FALSE);
+                status = A_EPROTO;
+                break;
+            }
+
+            pConnectResp->ConnectRespCode = pResponseMsg->Status;
+                /* check response status */
+            if (pResponseMsg->Status != HTC_SERVICE_SUCCESS) {
+                AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+                    (" Target failed service 0x%X connect request (status:%d)\n",
+                                pResponseMsg->ServiceID, pResponseMsg->Status));
+                status = A_EPROTO;
+                break;
+            }
+
+            assignedEndpoint = pResponseMsg->EndpointID;
+            maxMsgSize = pResponseMsg->MaxMsgSize;
+
+            if ((pConnectResp->pMetaData != NULL) &&
+                (pResponseMsg->ServiceMetaLength > 0) &&
+                (pResponseMsg->ServiceMetaLength <= HTC_SERVICE_META_DATA_MAX_LENGTH)) {
+                    /* caller supplied a buffer and the target responded with data */
+                int copyLength = min((int)pConnectResp->BufferLength, (int)pResponseMsg->ServiceMetaLength);
+                    /* copy the meta data */
+                A_MEMCPY(pConnectResp->pMetaData,
+                         ((A_UINT8 *)pResponseMsg) + sizeof(HTC_CONNECT_SERVICE_RESPONSE_MSG),
+                         copyLength);
+                pConnectResp->ActualLength = copyLength;
+            }
+
+        }
+
+            /* the rest of these are parameter checks so set the error status */
+        status = A_EPROTO;
+
+        if (assignedEndpoint >= ENDPOINT_MAX) {
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+        if (0 == maxMsgSize) {
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+        pEndpoint = &target->EndPoint[assignedEndpoint];
+
+        if (pEndpoint->ServiceID != 0) {
+            /* endpoint already in use! */
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+
+            /* return assigned endpoint to caller */
+        pConnectResp->Endpoint = assignedEndpoint;
+        pConnectResp->MaxMsgLength = maxMsgSize;
+
+            /* setup the endpoint */
+        pEndpoint->ServiceID = pConnectReq->ServiceID; /* this marks the endpoint in use */
+        pEndpoint->MaxTxQueueDepth = pConnectReq->MaxSendQueueDepth;
+        pEndpoint->MaxMsgLength = maxMsgSize;
+            /* copy all the callbacks */
+        pEndpoint->EpCallBacks = pConnectReq->EpCallbacks;
+        INIT_HTC_PACKET_QUEUE(&pEndpoint->RxBuffers);
+        INIT_HTC_PACKET_QUEUE(&pEndpoint->TxQueue);
+            /* set the credit distribution info for this endpoint, this information is
+             * passed back to the credit distribution callback function */
+        pEndpoint->CreditDist.ServiceID = pConnectReq->ServiceID;
+        pEndpoint->CreditDist.pHTCReserved = pEndpoint;
+        pEndpoint->CreditDist.Endpoint = assignedEndpoint;
+        pEndpoint->CreditDist.TxCreditSize = target->TargetCreditSize;
+        pEndpoint->CreditDist.TxCreditsPerMaxMsg = maxMsgSize / target->TargetCreditSize;
+
+        if (0 == pEndpoint->CreditDist.TxCreditsPerMaxMsg) {
+            pEndpoint->CreditDist.TxCreditsPerMaxMsg = 1;
+        }
+
+        status = A_OK;
+
+    } while (FALSE);
+
+    if (pSendPacket != NULL) {
+        HTC_FREE_CONTROL_TX(target,pSendPacket);
+    }
+
+    if (pRecvPacket != NULL) {
+        HTC_FREE_CONTROL_RX(target,pRecvPacket);
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCConnectService \n"));
+
+    return status;
+}
+
+static void AddToEndpointDistList(HTC_TARGET *target, HTC_ENDPOINT_CREDIT_DIST *pEpDist)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pCurEntry,*pLastEntry;
+
+    if (NULL == target->EpCreditDistributionListHead) {
+        target->EpCreditDistributionListHead = pEpDist;
+        pEpDist->pNext = NULL;
+        pEpDist->pPrev = NULL;
+        return;
+    }
+
+        /* queue to the end of the list, this does not have to be very
+         * fast since this list is built at startup time */
+    pCurEntry = target->EpCreditDistributionListHead;
+
+    while (pCurEntry) {
+        pLastEntry = pCurEntry;
+        pCurEntry = pCurEntry->pNext;
+    }
+
+    pLastEntry->pNext = pEpDist;
+    pEpDist->pPrev = pLastEntry;
+    pEpDist->pNext = NULL;
+}
+
+
+
+/* default credit init callback */
+static void HTCDefaultCreditInit(void                     *Context,
+                                 HTC_ENDPOINT_CREDIT_DIST *pEPList,
+                                 int                      TotalCredits)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+    int                      totalEps = 0;
+    int                      creditsPerEndpoint;
+
+    pCurEpDist = pEPList;
+        /* first run through the list and figure out how many endpoints we are dealing with */
+    while (pCurEpDist != NULL) {
+        pCurEpDist = pCurEpDist->pNext;
+        totalEps++;
+    }
+
+        /* even distribution */
+    creditsPerEndpoint = TotalCredits/totalEps;
+
+    pCurEpDist = pEPList;
+        /* run through the list and set minimum and normal credits and
+         * provide the endpoint with some credits to start */
+    while (pCurEpDist != NULL) {
+
+        if (creditsPerEndpoint < pCurEpDist->TxCreditsPerMaxMsg) {
+                /* too many endpoints and not enough credits */
+            AR_DEBUG_ASSERT(FALSE);
+            break;
+        }
+            /* our minimum is set for at least 1 max message */
+        pCurEpDist->TxCreditsMin = pCurEpDist->TxCreditsPerMaxMsg;
+            /* this value is ignored by our credit alg, since we do
+             * not dynamically adjust credits, this is the policy of
+             * the "default" credit distribution, something simple and easy */
+        pCurEpDist->TxCreditsNorm = 0xFFFF;
+            /* give the endpoint minimum credits */
+        pCurEpDist->TxCredits = creditsPerEndpoint;
+        pCurEpDist->TxCreditsAssigned = creditsPerEndpoint;
+        pCurEpDist = pCurEpDist->pNext;
+    }
+
+}
+
+/* default credit distribution callback, NOTE, this callback holds the TX lock */
+void HTCDefaultCreditDist(void                     *Context,
+                          HTC_ENDPOINT_CREDIT_DIST *pEPDistList,
+                          HTC_CREDIT_DIST_REASON   Reason)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+
+    if (Reason == HTC_CREDIT_DIST_SEND_COMPLETE) {
+        pCurEpDist = pEPDistList;
+            /* simple distribution */
+        while (pCurEpDist != NULL) {
+            if (pCurEpDist->TxCreditsToDist > 0) {
+                    /* just give the endpoint back the credits */
+                pCurEpDist->TxCredits += pCurEpDist->TxCreditsToDist;
+                pCurEpDist->TxCreditsToDist = 0;
+            }
+            pCurEpDist = pCurEpDist->pNext;
+        }
+    }
+
+    /* note we do not need to handle the other reason codes as this is a very
+     * simple distribution scheme, no need to seek for more credits or handle inactivity */
+}
+
+void HTCSetCreditDistribution(HTC_HANDLE               HTCHandle,
+                              void                     *pCreditDistContext,
+                              HTC_CREDIT_DIST_CALLBACK CreditDistFunc,
+                              HTC_CREDIT_INIT_CALLBACK CreditInitFunc,
+                              HTC_SERVICE_ID           ServicePriorityOrder[],
+                              int                      ListLength)
+{
+    HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+    int i;
+    int ep;
+
+    if (CreditInitFunc != NULL) {
+            /* caller has supplied their own distribution functions */
+        target->InitCredits = CreditInitFunc;
+        AR_DEBUG_ASSERT(CreditDistFunc != NULL);
+        target->DistributeCredits = CreditDistFunc;
+        target->pCredDistContext = pCreditDistContext;
+    } else {
+        /* caller wants HTC to do distribution */
+        /* if caller wants service to handle distributions then
+         * it must set both of these to NULL! */
+        AR_DEBUG_ASSERT(CreditDistFunc == NULL);
+        target->InitCredits = HTCDefaultCreditInit;
+        target->DistributeCredits = HTCDefaultCreditDist;
+        target->pCredDistContext = target;
+    }
+
+        /* always add HTC control endpoint first, we only expose the list after the
+         * first one, this is added for TX queue checking */
+    AddToEndpointDistList(target, &target->EndPoint[ENDPOINT_0].CreditDist);
+
+        /* build the list of credit distribution structures in priority order
+         * supplied by the caller, these will follow endpoint 0 */
+    for (i = 0; i < ListLength; i++) {
+            /* match services with endpoints and add the endpoints to the distribution list
+             * in FIFO order */
+        for (ep = ENDPOINT_1; ep < ENDPOINT_MAX; ep++) {
+            if (target->EndPoint[ep].ServiceID == ServicePriorityOrder[i]) {
+                    /* queue this one to the list */
+                AddToEndpointDistList(target, &target->EndPoint[ep].CreditDist);
+                break;
+            }
+        }
+        AR_DEBUG_ASSERT(ep < ENDPOINT_MAX);
+    }
+
+}
diff --git a/drivers/ar6000/include/AR6001_regdump.h b/drivers/ar6000/include/AR6001_regdump.h
new file mode 100644
index 00000000000..c1bcadea372
--- /dev/null
+++ b/drivers/ar6000/include/AR6001_regdump.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __AR6000_REGDUMP_H__
+#define __AR6000_REGDUMP_H__
+
+#if !defined(__ASSEMBLER__)
+/*
+ * Target CPU state at the time of failure is reflected
+ * in a register dump, which the Host can fetch through
+ * the diagnostic window.
+ */
+
+struct MIPS_exception_frame_s {
+    A_UINT32 pc;        /* Program Counter */
+    A_UINT32 at;        /* MIPS General Purpose registers */
+    A_UINT32 v0;
+    A_UINT32 v1;
+    A_UINT32 a0;
+    A_UINT32 a1;
+    A_UINT32 a2;
+    A_UINT32 a3;
+    A_UINT32 t0;
+    A_UINT32 t1;
+    A_UINT32 t2;
+    A_UINT32 t3;
+    A_UINT32 t4;
+    A_UINT32 t5;
+    A_UINT32 t6;
+    A_UINT32 t7;
+    A_UINT32 s0;
+    A_UINT32 s1;
+    A_UINT32 s2;
+    A_UINT32 s3;
+    A_UINT32 s4;
+    A_UINT32 s5;
+    A_UINT32 s6;
+    A_UINT32 s7;
+    A_UINT32 t8;
+    A_UINT32 t9;
+    A_UINT32 k0;
+    A_UINT32 k1;
+    A_UINT32 gp;
+    A_UINT32 sp;
+    A_UINT32 s8;
+    A_UINT32 ra;
+    A_UINT32 cause; /* Selected coprocessor regs */
+    A_UINT32 status;
+};
+typedef struct MIPS_exception_frame_s CPU_exception_frame_t;
+
+#endif
+
+/*
+ * Offsets into MIPS_exception_frame structure, for use in assembler code
+ * MUST MATCH C STRUCTURE ABOVE
+ */
+#define RD_pc           0
+#define RD_at           1
+#define RD_v0           2
+#define RD_v1           3
+#define RD_a0           4
+#define RD_a1           5
+#define RD_a2           6
+#define RD_a3           7
+#define RD_t0           8
+#define RD_t1           9
+#define RD_t2           10
+#define RD_t3           11
+#define RD_t4           12
+#define RD_t5           13
+#define RD_t6           14
+#define RD_t7           15
+#define RD_s0           16
+#define RD_s1           17
+#define RD_s2           18
+#define RD_s3           19
+#define RD_s4           20
+#define RD_s5           21
+#define RD_s6           22
+#define RD_s7           23
+#define RD_t8           24
+#define RD_t9           25
+#define RD_k0           26
+#define RD_k1           27
+#define RD_gp           28
+#define RD_sp           29
+#define RD_s8           30
+#define RD_ra           31
+#define RD_cause        32
+#define RD_status       33
+
+#define RD_SIZE         (34*4) /* Space for this number of words */
+
+#endif /* __AR6000_REGDUMP_H__ */
diff --git a/drivers/ar6000/include/AR6K_version.h b/drivers/ar6000/include/AR6K_version.h
new file mode 100644
index 00000000000..d5b2a20b043
--- /dev/null
+++ b/drivers/ar6000/include/AR6K_version.h
@@ -0,0 +1,36 @@
+#define __VER_MAJOR_ 2
+#define __VER_MINOR_ 0
+#define __VER_PATCH_ 0
+
+
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * The makear6ksdk script (used for release builds) modifies the following line.
+ */
+#define __BUILD_NUMBER_ 18
+
+
+/* Format of the version number. */
+#define VER_MAJOR_BIT_OFFSET		28
+#define VER_MINOR_BIT_OFFSET		24
+#define VER_PATCH_BIT_OFFSET		16
+#define VER_BUILD_NUM_BIT_OFFSET	0
+
+
+/*
+ * The version has the following format:
+ * Bits 28-31: Major version
+ * Bits 24-27: Minor version
+ * Bits 16-23: Patch version
+ * Bits 0-15:  Build number (automatically generated during build process )
+ * E.g. Build 1.1.3.7 would be represented as 0x11030007.
+ *
+ * DO NOT split the following macro into multiple lines as this may confuse the build scripts.
+ */
+#define AR6K_SW_VERSION 	( ( __VER_MAJOR_ << VER_MAJOR_BIT_OFFSET ) + ( __VER_MINOR_ << VER_MINOR_BIT_OFFSET ) + ( __VER_PATCH_ << VER_PATCH_BIT_OFFSET ) + ( __BUILD_NUMBER_ << VER_BUILD_NUM_BIT_OFFSET ) )
+
+
diff --git a/drivers/ar6000/include/AR6K_version.h.NEW b/drivers/ar6000/include/AR6K_version.h.NEW
new file mode 100644
index 00000000000..d5b2a20b043
--- /dev/null
+++ b/drivers/ar6000/include/AR6K_version.h.NEW
@@ -0,0 +1,36 @@
+#define __VER_MAJOR_ 2
+#define __VER_MINOR_ 0
+#define __VER_PATCH_ 0
+
+
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * The makear6ksdk script (used for release builds) modifies the following line.
+ */
+#define __BUILD_NUMBER_ 18
+
+
+/* Format of the version number. */
+#define VER_MAJOR_BIT_OFFSET		28
+#define VER_MINOR_BIT_OFFSET		24
+#define VER_PATCH_BIT_OFFSET		16
+#define VER_BUILD_NUM_BIT_OFFSET	0
+
+
+/*
+ * The version has the following format:
+ * Bits 28-31: Major version
+ * Bits 24-27: Minor version
+ * Bits 16-23: Patch version
+ * Bits 0-15:  Build number (automatically generated during build process )
+ * E.g. Build 1.1.3.7 would be represented as 0x11030007.
+ *
+ * DO NOT split the following macro into multiple lines as this may confuse the build scripts.
+ */
+#define AR6K_SW_VERSION 	( ( __VER_MAJOR_ << VER_MAJOR_BIT_OFFSET ) + ( __VER_MINOR_ << VER_MINOR_BIT_OFFSET ) + ( __VER_PATCH_ << VER_PATCH_BIT_OFFSET ) + ( __BUILD_NUMBER_ << VER_BUILD_NUM_BIT_OFFSET ) )
+
+
diff --git a/drivers/ar6000/include/AR6Khwreg.h b/drivers/ar6000/include/AR6Khwreg.h
new file mode 100644
index 00000000000..ecfdf20a0f0
--- /dev/null
+++ b/drivers/ar6000/include/AR6Khwreg.h
@@ -0,0 +1,147 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains the definitions for AR6001 registers
+ * that may be directly manipulated by Host software.
+ */
+
+#ifndef __AR6KHWREG_H__
+#define __AR6KHWREG_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Host registers */
+#define HOST_INT_STATUS_ADDRESS                  0x00000400
+#define CPU_INT_STATUS_ADDRESS                   0x00000401
+#define ERROR_INT_STATUS_ADDRESS                 0x00000402
+#define INT_STATUS_ENABLE_ADDRESS                0x00000418
+#define CPU_INT_STATUS_ENABLE_ADDRESS            0x00000419
+#define COUNT_ADDRESS                            0x00000420
+#define COUNT_DEC_ADDRESS                        0x00000440
+#define WINDOW_DATA_ADDRESS                      0x00000474
+#define WINDOW_WRITE_ADDR_ADDRESS                0x00000478
+#define WINDOW_READ_ADDR_ADDRESS                 0x0000047c
+
+/* Target addresses */
+#define RESET_CONTROL_ADDRESS                    0x0c000000
+#define MC_REMAP_VALID_ADDRESS                   0x0c004080
+#define MC_REMAP_SIZE_ADDRESS                    0x0c004100
+#define MC_REMAP_COMPARE_ADDRESS                 0x0c004180
+#define MC_REMAP_TARGET_ADDRESS                  0x0c004200
+#define LOCAL_COUNT_ADDRESS                      0x0c014080
+#define LOCAL_SCRATCH_ADDRESS                    0x0c0140c0
+
+
+#define INT_STATUS_ENABLE_ERROR_MSB              7
+#define INT_STATUS_ENABLE_ERROR_LSB              7
+#define INT_STATUS_ENABLE_ERROR_MASK             0x00000080
+#define INT_STATUS_ENABLE_ERROR_GET(x)           (((x) & INT_STATUS_ENABLE_ERROR_MASK) >> INT_STATUS_ENABLE_ERROR_LSB)
+#define INT_STATUS_ENABLE_ERROR_SET(x)           (((x) << INT_STATUS_ENABLE_ERROR_LSB) & INT_STATUS_ENABLE_ERROR_MASK)
+
+#define INT_STATUS_ENABLE_CPU_MSB                6
+#define INT_STATUS_ENABLE_CPU_LSB                6
+#define INT_STATUS_ENABLE_CPU_MASK               0x00000040
+#define INT_STATUS_ENABLE_CPU_GET(x)             (((x) & INT_STATUS_ENABLE_CPU_MASK) >> INT_STATUS_ENABLE_CPU_LSB)
+#define INT_STATUS_ENABLE_CPU_SET(x)             (((x) << INT_STATUS_ENABLE_CPU_LSB) & INT_STATUS_ENABLE_CPU_MASK)
+
+#define INT_STATUS_ENABLE_COUNTER_MSB            4
+#define INT_STATUS_ENABLE_COUNTER_LSB            4
+#define INT_STATUS_ENABLE_COUNTER_MASK           0x00000010
+#define INT_STATUS_ENABLE_COUNTER_GET(x)         (((x) & INT_STATUS_ENABLE_COUNTER_MASK) >> INT_STATUS_ENABLE_COUNTER_LSB)
+#define INT_STATUS_ENABLE_COUNTER_SET(x)         (((x) << INT_STATUS_ENABLE_COUNTER_LSB) & INT_STATUS_ENABLE_COUNTER_MASK)
+
+#define INT_STATUS_ENABLE_MBOX_DATA_MSB          3
+#define INT_STATUS_ENABLE_MBOX_DATA_LSB          0
+#define INT_STATUS_ENABLE_MBOX_DATA_MASK         0x0000000f
+#define INT_STATUS_ENABLE_MBOX_DATA_GET(x)       (((x) & INT_STATUS_ENABLE_MBOX_DATA_MASK) >> INT_STATUS_ENABLE_MBOX_DATA_LSB)
+#define INT_STATUS_ENABLE_MBOX_DATA_SET(x)       (((x) << INT_STATUS_ENABLE_MBOX_DATA_LSB) & INT_STATUS_ENABLE_MBOX_DATA_MASK)
+
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MSB     1
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB     1
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK    0x00000002
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_GET(x)  (((x) & ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK) >> ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB)
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(x)  (((x) << ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB) & ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK)
+
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MSB      0
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB      0
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK     0x00000001
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_GET(x)   (((x) & ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK) >> ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB)
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(x)   (((x) << ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB) & ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK)
+
+
+#define CPU_INT_STATUS_ENABLE_BIT_MSB            7
+#define CPU_INT_STATUS_ENABLE_BIT_LSB            0
+#define CPU_INT_STATUS_ENABLE_BIT_MASK           0x000000ff
+#define CPU_INT_STATUS_ENABLE_BIT_GET(x)         (((x) & CPU_INT_STATUS_ENABLE_BIT_MASK) >> CPU_INT_STATUS_ENABLE_BIT_LSB)
+#define CPU_INT_STATUS_ENABLE_BIT_SET(x)         (((x) << CPU_INT_STATUS_ENABLE_BIT_LSB) & CPU_INT_STATUS_ENABLE_BIT_MASK)
+
+#define COUNTER_INT_STATUS_ENABLE_BIT_MSB        7
+#define COUNTER_INT_STATUS_ENABLE_BIT_LSB        0
+#define COUNTER_INT_STATUS_ENABLE_BIT_MASK       0x000000ff
+#define COUNTER_INT_STATUS_ENABLE_BIT_GET(x)     (((x) & COUNTER_INT_STATUS_ENABLE_BIT_MASK) >> COUNTER_INT_STATUS_ENABLE_BIT_LSB)
+#define COUNTER_INT_STATUS_ENABLE_BIT_SET(x)     (((x) << COUNTER_INT_STATUS_ENABLE_BIT_LSB) & COUNTER_INT_STATUS_ENABLE_BIT_MASK)
+
+#define ERROR_INT_STATUS_WAKEUP_MSB              2
+#define ERROR_INT_STATUS_WAKEUP_LSB              2
+#define ERROR_INT_STATUS_WAKEUP_MASK             0x00000004
+#define ERROR_INT_STATUS_WAKEUP_GET(x)           (((x) & ERROR_INT_STATUS_WAKEUP_MASK) >> ERROR_INT_STATUS_WAKEUP_LSB)
+#define ERROR_INT_STATUS_WAKEUP_SET(x)           (((x) << ERROR_INT_STATUS_WAKEUP_LSB) & ERROR_INT_STATUS_WAKEUP_MASK)
+
+#define ERROR_INT_STATUS_RX_UNDERFLOW_MSB        1
+#define ERROR_INT_STATUS_RX_UNDERFLOW_LSB        1
+#define ERROR_INT_STATUS_RX_UNDERFLOW_MASK       0x00000002
+#define ERROR_INT_STATUS_RX_UNDERFLOW_GET(x)     (((x) & ERROR_INT_STATUS_RX_UNDERFLOW_MASK) >> ERROR_INT_STATUS_RX_UNDERFLOW_LSB)
+#define ERROR_INT_STATUS_RX_UNDERFLOW_SET(x)     (((x) << ERROR_INT_STATUS_RX_UNDERFLOW_LSB) & ERROR_INT_STATUS_RX_UNDERFLOW_MASK)
+
+#define ERROR_INT_STATUS_TX_OVERFLOW_MSB         0
+#define ERROR_INT_STATUS_TX_OVERFLOW_LSB         0
+#define ERROR_INT_STATUS_TX_OVERFLOW_MASK        0x00000001
+#define ERROR_INT_STATUS_TX_OVERFLOW_GET(x)      (((x) & ERROR_INT_STATUS_TX_OVERFLOW_MASK) >> ERROR_INT_STATUS_TX_OVERFLOW_LSB)
+#define ERROR_INT_STATUS_TX_OVERFLOW_SET(x)      (((x) << ERROR_INT_STATUS_TX_OVERFLOW_LSB) & ERROR_INT_STATUS_TX_OVERFLOW_MASK)
+
+#define HOST_INT_STATUS_ERROR_MSB                7
+#define HOST_INT_STATUS_ERROR_LSB                7
+#define HOST_INT_STATUS_ERROR_MASK               0x00000080
+#define HOST_INT_STATUS_ERROR_GET(x)             (((x) & HOST_INT_STATUS_ERROR_MASK) >> HOST_INT_STATUS_ERROR_LSB)
+#define HOST_INT_STATUS_ERROR_SET(x)             (((x) << HOST_INT_STATUS_ERROR_LSB) & HOST_INT_STATUS_ERROR_MASK)
+
+#define HOST_INT_STATUS_CPU_MSB                  6
+#define HOST_INT_STATUS_CPU_LSB                  6
+#define HOST_INT_STATUS_CPU_MASK                 0x00000040
+#define HOST_INT_STATUS_CPU_GET(x)               (((x) & HOST_INT_STATUS_CPU_MASK) >> HOST_INT_STATUS_CPU_LSB)
+#define HOST_INT_STATUS_CPU_SET(x)               (((x) << HOST_INT_STATUS_CPU_LSB) & HOST_INT_STATUS_CPU_MASK)
+
+#define HOST_INT_STATUS_COUNTER_MSB              4
+#define HOST_INT_STATUS_COUNTER_LSB              4
+#define HOST_INT_STATUS_COUNTER_MASK             0x00000010
+#define HOST_INT_STATUS_COUNTER_GET(x)           (((x) & HOST_INT_STATUS_COUNTER_MASK) >> HOST_INT_STATUS_COUNTER_LSB)
+#define HOST_INT_STATUS_COUNTER_SET(x)           (((x) << HOST_INT_STATUS_COUNTER_LSB) & HOST_INT_STATUS_COUNTER_MASK)
+
+#define RESET_CONTROL_WARM_RST_MSB               7
+#define RESET_CONTROL_WARM_RST_LSB               7
+#define RESET_CONTROL_WARM_RST_MASK              0x00000080
+#define RESET_CONTROL_WARM_RST_GET(x)            (((x) & RESET_CONTROL_WARM_RST_MASK) >> RESET_CONTROL_WARM_RST_LSB)
+#define RESET_CONTROL_WARM_RST_SET(x)            (((x) << RESET_CONTROL_WARM_RST_LSB) & RESET_CONTROL_WARM_RST_MASK)
+
+#define RESET_CONTROL_COLD_RST_MSB               8
+#define RESET_CONTROL_COLD_RST_LSB               8
+#define RESET_CONTROL_COLD_RST_MASK              0x00000100
+#define RESET_CONTROL_COLD_RST_GET(x)            (((x) & RESET_CONTROL_COLD_RST_MASK) >> RESET_CONTROL_COLD_RST_LSB)
+#define RESET_CONTROL_COLD_RST_SET(x)            (((x) << RESET_CONTROL_COLD_RST_LSB) & RESET_CONTROL_COLD_RST_MASK)
+
+#define RESET_CAUSE_LAST_MSB                     2
+#define RESET_CAUSE_LAST_LSB                     0
+#define RESET_CAUSE_LAST_MASK                    0x00000007
+#define RESET_CAUSE_LAST_GET(x)                  (((x) & RESET_CAUSE_LAST_MASK) >> RESET_CAUSE_LAST_LSB)
+#define RESET_CAUSE_LAST_SET(x)                  (((x) << RESET_CAUSE_LAST_LSB) & RESET_CAUSE_LAST_MASK)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __AR6KHWREG_H__ */
diff --git a/drivers/ar6000/include/a_config.h b/drivers/ar6000/include/a_config.h
new file mode 100644
index 00000000000..627b2984d30
--- /dev/null
+++ b/drivers/ar6000/include/a_config.h
@@ -0,0 +1,27 @@
+#ifndef _A_CONFIG_H_
+#define _A_CONFIG_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/*
+ * This file contains software configuration options that enables
+ * specific software "features"
+ */
+#include "../ar6000/config_linux.h"
+
+#endif
diff --git a/drivers/ar6000/include/a_debug.h b/drivers/ar6000/include/a_debug.h
new file mode 100644
index 00000000000..4b0b35155b0
--- /dev/null
+++ b/drivers/ar6000/include/a_debug.h
@@ -0,0 +1,41 @@
+#ifndef _A_DEBUG_H_
+#define _A_DEBUG_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include <a_types.h>
+#include <a_osapi.h>
+
+#define DBG_INFO		0x00000001
+#define DBG_ERROR		0x00000002
+#define DBG_WARNING		0x00000004
+#define DBG_SDIO		0x00000008
+#define DBG_HIF			0x00000010
+#define DBG_HTC			0x00000020
+#define DBG_WMI			0x00000040
+#define DBG_WMI2		0x00000080
+#define DBG_DRIVER		0x00000100
+
+#define DBG_DEFAULTS	(DBG_ERROR|DBG_WARNING)
+
+#include "../ar6000/debug_linux.h"
+
+#endif
diff --git a/drivers/ar6000/include/a_drv.h b/drivers/ar6000/include/a_drv.h
new file mode 100644
index 00000000000..07e52d1792e
--- /dev/null
+++ b/drivers/ar6000/include/a_drv.h
@@ -0,0 +1,28 @@
+#ifndef _A_DRV_H_
+#define _A_DRV_H_
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_drv.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "../ar6000/athdrv_linux.h"
+
+#endif /* _ADRV_H_ */
diff --git a/drivers/ar6000/include/a_drv_api.h b/drivers/ar6000/include/a_drv_api.h
new file mode 100644
index 00000000000..75317260cfb
--- /dev/null
+++ b/drivers/ar6000/include/a_drv_api.h
@@ -0,0 +1,185 @@
+#ifndef _A_DRV_API_H_
+#define _A_DRV_API_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/****************************************************************************/
+/****************************************************************************/
+/**                                                                        **/
+/** WMI related hooks                                                      **/
+/**                                                                        **/
+/****************************************************************************/
+/****************************************************************************/
+
+#include <ar6000_api.h>
+
+#define A_WMI_CHANNELLIST_RX(devt, numChan, chanList)	\
+	ar6000_channelList_rx((devt), (numChan), (chanList))
+
+#define A_WMI_SET_NUMDATAENDPTS(devt, num)	\
+	ar6000_set_numdataendpts((devt), (num))
+
+#define A_WMI_CONTROL_TX(devt, osbuf, streamID)	\
+	ar6000_control_tx((devt), (osbuf), (streamID))
+
+#define A_WMI_TARGETSTATS_EVENT(devt, pStats)	\
+	ar6000_targetStats_event((devt), (pStats))
+
+#define A_WMI_SCANCOMPLETE_EVENT(devt, status)	\
+	ar6000_scanComplete_event((devt), (status))
+
+#ifdef CONFIG_HOST_DSET_SUPPORT
+
+#define A_WMI_DSET_DATA_REQ(devt, access_cookie, offset, length, targ_buf, targ_reply_fn, targ_reply_arg)	\
+	ar6000_dset_data_req((devt), (access_cookie), (offset), (length), (targ_buf), (targ_reply_fn), (targ_reply_arg))
+
+#define A_WMI_DSET_CLOSE(devt, access_cookie)	\
+	ar6000_dset_close((devt), (access_cookie))
+
+#endif
+
+#define A_WMI_DSET_OPEN_REQ(devt, id, targ_handle, targ_reply_fn, targ_reply_arg) \
+	ar6000_dset_open_req((devt), (id), (targ_handle), (targ_reply_fn), (targ_reply_arg))
+
+#define A_WMI_CONNECT_EVENT(devt, channel, bssid, listenInterval, beaconInterval, networkType, beaconIeLen, assocReqLen, assocRespLen, assocInfo) \
+	ar6000_connect_event((devt), (channel), (bssid), (listenInterval), (beaconInterval), (networkType), (beaconIeLen), (assocReqLen), (assocRespLen), (assocInfo))
+
+#define A_WMI_REGDOMAIN_EVENT(devt, regCode)	\
+	ar6000_regDomain_event((devt), (regCode))
+
+#define A_WMI_NEIGHBORREPORT_EVENT(devt, numAps, info)	\
+	ar6000_neighborReport_event((devt), (numAps), (info))
+
+#define A_WMI_DISCONNECT_EVENT(devt, reason, bssid, assocRespLen, assocInfo, protocolReasonStatus)	\
+	ar6000_disconnect_event((devt), (reason), (bssid), (assocRespLen), (assocInfo), (protocolReasonStatus))
+
+#define A_WMI_TKIP_MICERR_EVENT(devt, keyid, ismcast)	\
+	ar6000_tkip_micerr_event((devt), (keyid), (ismcast))
+
+#define A_WMI_BITRATE_RX(devt, rateKbps)	\
+	ar6000_bitrate_rx((devt), (rateKbps))
+
+#define A_WMI_TXPWR_RX(devt, txPwr)	\
+	ar6000_txPwr_rx((devt), (txPwr))
+
+#define A_WMI_READY_EVENT(devt, datap, phyCap)	\
+	ar6000_ready_event((devt), (datap), (phyCap))
+
+#define A_WMI_DBGLOG_INIT_DONE(ar) \
+        ar6000_dbglog_init_done(ar);
+
+#define A_WMI_RSSI_THRESHOLD_EVENT(devt, newThreshold, rssi)	\
+	ar6000_rssiThreshold_event((devt), (newThreshold), (rssi))
+
+#define A_WMI_REPORT_ERROR_EVENT(devt, errorVal)	\
+	ar6000_reportError_event((devt), (errorVal))
+
+#define A_WMI_ROAM_TABLE_EVENT(devt, pTbl) \
+	ar6000_roam_tbl_event((devt), (pTbl))
+
+#define A_WMI_ROAM_DATA_EVENT(devt, p) \
+	ar6000_roam_data_event((devt), (p))
+
+#define A_WMI_WOW_LIST_EVENT(devt, num_filters, wow_filters)	\
+	ar6000_wow_list_event((devt), (num_filters), (wow_filters))
+
+#define A_WMI_CAC_EVENT(devt, ac, cac_indication, statusCode, tspecSuggestion)  \
+	ar6000_cac_event((devt), (ac), (cac_indication), (statusCode), (tspecSuggestion))
+
+#define A_WMI_IPTOS_TO_USERPRIORITY(pkt)    \
+	ar6000_iptos_to_userPriority((pkt))
+
+#define A_WMI_PMKID_LIST_EVENT(devt, num_pmkid, pmkid_list)	\
+	ar6000_pmkid_list_event((devt), (num_pmkid), (pmkid_list))
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+
+#define A_WMI_GPIO_INTR_RX(intr_mask, input_values) \
+	ar6000_gpio_intr_rx((intr_mask), (input_values))
+
+#define A_WMI_GPIO_DATA_RX(reg_id, value) \
+	ar6000_gpio_data_rx((reg_id), (value))
+
+#define A_WMI_GPIO_ACK_RX() \
+	ar6000_gpio_ack_rx()
+
+#endif
+
+#ifdef SEND_EVENT_TO_APP
+
+#define A_WMI_SEND_EVENT_TO_APP(ar, eventId, datap, len) \
+	ar6000_send_event_to_app((ar), (eventId), (datap), (len))
+
+#else
+
+#define A_WMI_SEND_EVENT_TO_APP(ar, eventId, datap, len)
+
+#endif
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+#define A_WMI_TCMD_RX_REPORT_EVENT(devt, results, len) \
+	ar6000_tcmd_rx_report_event((devt), (results), (len))
+#endif
+
+#define A_WMI_HBCHALLENGERESP_EVENT(devt, cookie, source)    \
+    ar6000_hbChallengeResp_event((devt), (cookie), (source))
+
+#define A_WMI_TX_RETRY_ERR_EVENT(devt) \
+	ar6000_tx_retry_err_event((devt))
+
+#define A_WMI_SNR_THRESHOLD_EVENT_RX(devt, newThreshold, snr) \
+	ar6000_snrThresholdEvent_rx((devt), (newThreshold), (snr))
+
+#define A_WMI_LQ_THRESHOLD_EVENT_RX(devt, range, lqVal) \
+	ar6000_lqThresholdEvent_rx((devt), (range), (lqVal))
+
+#define A_WMI_RATEMASK_RX(devt, ratemask) \
+	ar6000_ratemask_rx((devt), (ratemask))
+
+#define A_WMI_KEEPALIVE_RX(devt, configured)    \
+        ar6000_keepalive_rx((devt), (configured))
+
+#define A_WMI_BSSINFO_EVENT_RX(ar, datp, len)   \
+        ar6000_bssInfo_event_rx((ar), (datap), (len))
+
+#define A_WMI_DBGLOG_EVENT(ar, dropped, buffer, length) \
+        ar6000_dbglog_event((ar), (dropped), (buffer), (length));
+
+#define A_WMI_STREAM_TX_ACTIVE(devt,trafficClass) \
+    ar6000_indicate_tx_activity((devt),(trafficClass), TRUE)
+
+#define A_WMI_STREAM_TX_INACTIVE(devt,trafficClass) \
+    ar6000_indicate_tx_activity((devt),(trafficClass), FALSE)
+
+/****************************************************************************/
+/****************************************************************************/
+/**                                                                        **/
+/** HTC related hooks                                                      **/
+/**                                                                        **/
+/****************************************************************************/
+/****************************************************************************/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/drivers/ar6000/include/a_osapi.h b/drivers/ar6000/include/a_osapi.h
new file mode 100644
index 00000000000..7d6086712f7
--- /dev/null
+++ b/drivers/ar6000/include/a_osapi.h
@@ -0,0 +1,28 @@
+#ifndef _A_OSAPI_H_
+#define _A_OSAPI_H_
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_osapi.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "../ar6000/osapi_linux.h"
+
+#endif /* _OSAPI_H_ */
diff --git a/drivers/ar6000/include/a_types.h b/drivers/ar6000/include/a_types.h
new file mode 100644
index 00000000000..e2ed090767b
--- /dev/null
+++ b/drivers/ar6000/include/a_types.h
@@ -0,0 +1,28 @@
+#ifndef _A_TYPES_H_
+#define _A_TYPES_H_
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_types.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc.,  All Rights Reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "../ar6000/athtypes_linux.h"
+
+#endif /* _ATHTYPES_H_ */
diff --git a/drivers/ar6000/include/ar6000_api.h b/drivers/ar6000/include/ar6000_api.h
new file mode 100644
index 00000000000..abe5de79a52
--- /dev/null
+++ b/drivers/ar6000/include/ar6000_api.h
@@ -0,0 +1,29 @@
+#ifndef _AR6000_API_H_
+#define _AR6000_API_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains the API to access the OS dependent atheros host driver
+ * by the WMI or WLAN generic modules.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/ar6000_api.h#1 $
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "../ar6000/ar6xapi_linux.h"
+
+#endif /* _AR6000_API_H */
+
diff --git a/drivers/ar6000/include/ar6000_diag.h b/drivers/ar6000/include/ar6000_diag.h
new file mode 100644
index 00000000000..2df131df205
--- /dev/null
+++ b/drivers/ar6000/include/ar6000_diag.h
@@ -0,0 +1,38 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef AR6000_DIAG_H_
+#define AR6000_DIAG_H_
+
+
+A_STATUS
+ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+
+A_STATUS
+ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+
+A_STATUS
+ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
+                    A_UCHAR *data, A_UINT32 length);
+
+A_STATUS
+ar6000_WriteDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
+                     A_UCHAR *data, A_UINT32 length);
+
+#endif /*AR6000_DIAG_H_*/
diff --git a/drivers/ar6000/include/athdefs.h b/drivers/ar6000/include/athdefs.h
new file mode 100644
index 00000000000..c28c871c599
--- /dev/null
+++ b/drivers/ar6000/include/athdefs.h
@@ -0,0 +1,85 @@
+#ifndef __ATHDEFS_H__
+#define __ATHDEFS_H__
+
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains definitions that may be used across both
+ * Host and Target software.  Nothing here is module-dependent
+ * or platform-dependent.
+ */
+
+/*
+ * Generic error codes that can be used by hw, sta, ap, sim, dk
+ * and any other environments. Since these are enums, feel free to
+ * add any more codes that you need.
+ */
+
+typedef enum {
+    A_ERROR = -1,               /* Generic error return */
+    A_OK = 0,                   /* success */
+                                /* Following values start at 1 */
+    A_DEVICE_NOT_FOUND,         /* not able to find PCI device */
+    A_NO_MEMORY,                /* not able to allocate memory, not available */
+    A_MEMORY_NOT_AVAIL,         /* memory region is not free for mapping */
+    A_NO_FREE_DESC,             /* no free descriptors available */
+    A_BAD_ADDRESS,              /* address does not match descriptor */
+    A_WIN_DRIVER_ERROR,         /* used in NT_HW version, if problem at init */
+    A_REGS_NOT_MAPPED,          /* registers not correctly mapped */
+    A_EPERM,                    /* Not superuser */
+    A_EACCES,                   /* Access denied */
+    A_ENOENT,                   /* No such entry, search failed, etc. */
+    A_EEXIST,                   /* The object already exists (can't create) */
+    A_EFAULT,                   /* Bad address fault */
+    A_EBUSY,                    /* Object is busy */
+    A_EINVAL,                   /* Invalid parameter */
+    A_EMSGSIZE,                 /* Inappropriate message buffer length */
+    A_ECANCELED,                /* Operation canceled */
+    A_ENOTSUP,                  /* Operation not supported */
+    A_ECOMM,                    /* Communication error on send */
+    A_EPROTO,                   /* Protocol error */
+    A_ENODEV,                   /* No such device */
+    A_EDEVNOTUP,                /* device is not UP */
+    A_NO_RESOURCE,              /* No resources for requested operation */
+    A_HARDWARE,                 /* Hardware failure */
+    A_PENDING,                  /* Asynchronous routine; will send up results la
+ter (typically in callback) */
+    A_EBADCHANNEL,              /* The channel cannot be used */
+    A_DECRYPT_ERROR,            /* Decryption error */
+    A_PHY_ERROR,                /* RX PHY error */
+    A_CONSUMED                  /* Object was consumed */
+} A_STATUS;
+
+#define A_SUCCESS(x)        (x == A_OK)
+#define A_FAILED(x)         (!A_SUCCESS(x))
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+/*
+ * The following definition is WLAN specific definition
+ */
+typedef enum {
+    MODE_11A = 0,   /* 11a Mode */
+    MODE_11G = 1,   /* 11g + 11b Mode */
+    MODE_11B = 2,   /* 11b Mode */
+    MODE_11GONLY = 3, /* 11g only Mode */
+    MODE_UNKNOWN = 4,
+    MODE_MAX = 4
+} WLAN_PHY_MODE;
+
+typedef enum {
+    WLAN_11A_CAPABILITY   = 1,
+    WLAN_11G_CAPABILITY   = 2,
+    WLAN_11AG_CAPABILITY  = 3,
+}WLAN_CAPABILITY;
+
+#endif /* __ATHDEFS_H__ */
diff --git a/drivers/ar6000/include/athdrv.h b/drivers/ar6000/include/athdrv.h
new file mode 100644
index 00000000000..19da97e4bbd
--- /dev/null
+++ b/drivers/ar6000/include/athdrv.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _ATHDRV_H_
+#define _ATHDRV_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _ATHDRV_H_ */
diff --git a/drivers/ar6000/include/athendpack.h b/drivers/ar6000/include/athendpack.h
new file mode 100644
index 00000000000..42921ae7f73
--- /dev/null
+++ b/drivers/ar6000/include/athendpack.h
@@ -0,0 +1,41 @@
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ * @file: athendpack.h
+ *
+ * @abstract: end compiler-specific structure packing
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+#ifdef VXWORKS
+#endif /* VXWORKS */
+
+#ifdef LINUX
+#endif /* LINUX */
+
+#ifdef QNX
+#endif /* QNX */
+
+#ifdef INTEGRITY
+#include "integrity/athendpack_integrity.h"
+#endif /* INTEGRITY */
+
+#ifdef NUCLEUS
+#endif /* NUCLEUS */
+
+#ifdef UNDER_CE
+#include "../os/wince/include/athendpack_wince.h"
+#endif /* WINCE */
+
diff --git a/drivers/ar6000/include/athstartpack.h b/drivers/ar6000/include/athstartpack.h
new file mode 100644
index 00000000000..6632cc2cb50
--- /dev/null
+++ b/drivers/ar6000/include/athstartpack.h
@@ -0,0 +1,42 @@
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ * @file: athstartpack.h
+ *
+ * @abstract: start compiler-specific structure packing
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef VXWORKS
+#endif /* VXWORKS */
+
+#ifdef LINUX
+#endif /* LINUX */
+
+#ifdef QNX
+#endif /* QNX */
+
+#ifdef INTEGRITY
+#include "integrity/athstartpack_integrity.h"
+#endif /* INTEGRITY */
+
+#ifdef NUCLEUS
+#endif /* NUCLEUS */
+
+#ifdef UNDER_CE
+#include "../os/wince/include/athstartpack_wince.h"
+#endif /* WINCE */
+
diff --git a/drivers/ar6000/include/bmi.h b/drivers/ar6000/include/bmi.h
new file mode 100644
index 00000000000..2eb7134c7b8
--- /dev/null
+++ b/drivers/ar6000/include/bmi.h
@@ -0,0 +1,100 @@
+#ifndef _BMI_H_
+#define _BMI_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ * BMI declarations and prototypes
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* Header files */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "hif.h"
+#include "a_osapi.h"
+#include "bmi_msg.h"
+
+void
+BMIInit(void);
+
+A_STATUS
+BMIDone(HIF_DEVICE *device);
+
+A_STATUS
+BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info);
+
+A_STATUS
+BMIReadMemory(HIF_DEVICE *device,
+              A_UINT32 address,
+              A_UCHAR *buffer,
+              A_UINT32 length);
+
+A_STATUS
+BMIWriteMemory(HIF_DEVICE *device,
+               A_UINT32 address,
+               A_UCHAR *buffer,
+               A_UINT32 length);
+
+A_STATUS
+BMIExecute(HIF_DEVICE *device,
+           A_UINT32 address,
+           A_UINT32 *param);
+
+A_STATUS
+BMISetAppStart(HIF_DEVICE *device,
+               A_UINT32 address);
+
+A_STATUS
+BMIReadSOCRegister(HIF_DEVICE *device,
+                   A_UINT32 address,
+                   A_UINT32 *param);
+
+A_STATUS
+BMIWriteSOCRegister(HIF_DEVICE *device,
+                    A_UINT32 address,
+                    A_UINT32 param);
+
+A_STATUS
+BMIrompatchInstall(HIF_DEVICE *device,
+                   A_UINT32 ROM_addr,
+                   A_UINT32 RAM_addr,
+                   A_UINT32 nbytes,
+                   A_UINT32 do_activate,
+                   A_UINT32 *patch_id);
+
+A_STATUS
+BMIrompatchUninstall(HIF_DEVICE *device,
+                     A_UINT32 rompatch_id);
+
+A_STATUS
+BMIrompatchActivate(HIF_DEVICE *device,
+                    A_UINT32 rompatch_count,
+                    A_UINT32 *rompatch_list);
+
+A_STATUS
+BMIrompatchDeactivate(HIF_DEVICE *device,
+                      A_UINT32 rompatch_count,
+                      A_UINT32 *rompatch_list);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _BMI_H_ */
diff --git a/drivers/ar6000/include/bmi_msg.h b/drivers/ar6000/include/bmi_msg.h
new file mode 100644
index 00000000000..7c91ef47389
--- /dev/null
+++ b/drivers/ar6000/include/bmi_msg.h
@@ -0,0 +1,199 @@
+#ifndef __BMI_MSG_H__
+#define __BMI_MSG_H__
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/*
+ * Bootloader Messaging Interface (BMI)
+ *
+ * BMI is a very simple messaging interface used during initialization
+ * to read memory, write memory, execute code, and to define an
+ * application entry PC.
+ *
+ * It is used to download an application to AR6K, to provide
+ * patches to code that is already resident on AR6K, and generally
+ * to examine and modify state.  The Host has an opportunity to use
+ * BMI only once during bootup.  Once the Host issues a BMI_DONE
+ * command, this opportunity ends.
+ *
+ * The Host writes BMI requests to mailbox0, and reads BMI responses
+ * from mailbox0.   BMI requests all begin with a command
+ * (see below for specific commands), and are followed by
+ * command-specific data.
+ *
+ * Flow control:
+ * The Host can only issue a command once the Target gives it a
+ * "BMI Command Credit", using AR6K Counter #4.  As soon as the
+ * Target has completed a command, it issues another BMI Command
+ * Credit (so the Host can issue the next command).
+ *
+ * BMI handles all required Target-side cache flushing.
+ */
+
+
+/* Maximum data size used for BMI transfers */
+#define BMI_DATASZ_MAX                     32
+
+/* BMI Commands */
+
+#define BMI_NO_COMMAND                      0
+
+#define BMI_DONE                            1
+        /*
+         * Semantics: Host is done using BMI
+         * Request format:
+         *    A_UINT32      command (BMI_DONE)
+         * Response format: none
+         */
+
+#define BMI_READ_MEMORY                     2
+        /*
+         * Semantics: Host reads AR6K memory
+         * Request format:
+         *    A_UINT32      command (BMI_READ_MEMORY)
+         *    A_UINT32      address
+         *    A_UINT32      length, at most BMI_DATASZ_MAX
+         * Response format:
+         *    A_UINT8       data[length]
+         */
+
+#define BMI_WRITE_MEMORY                    3
+        /*
+         * Semantics: Host writes AR6K memory
+         * Request format:
+         *    A_UINT32       command (BMI_WRITE_MEMORY)
+         *    A_UINT32      address
+         *    A_UINT32      length, at most BMI_DATASZ_MAX
+         *    A_UINT8       data[length]
+         * Response format: none
+         */
+
+#define BMI_EXECUTE                         4
+        /*
+         * Semantics: Causes AR6K to execute code
+         * Request format:
+         *    A_UINT32      command (BMI_EXECUTE)
+         *    A_UINT32      address
+         *    A_UINT32      parameter
+         * Response format:
+         *    A_UINT32      return value
+         */
+
+#define BMI_SET_APP_START                   5
+        /*
+         * Semantics: Set Target application starting address
+         * Request format:
+         *    A_UINT32      command (BMI_SET_APP_START)
+         *    A_UINT32      address
+         * Response format: none
+         */
+
+#define BMI_READ_SOC_REGISTER               6
+        /*
+         * Semantics: Read a 32-bit Target SOC register.
+         * Request format:
+         *    A_UINT32      command (BMI_READ_REGISTER)
+         *    A_UINT32      address
+         * Response format:
+         *    A_UINT32      value
+         */
+
+#define BMI_WRITE_SOC_REGISTER              7
+        /*
+         * Semantics: Write a 32-bit Target SOC register.
+         * Request format:
+         *    A_UINT32      command (BMI_WRITE_REGISTER)
+         *    A_UINT32      address
+         *    A_UINT32      value
+         *
+         * Response format: none
+         */
+
+#define BMI_GET_TARGET_ID                  8
+#define BMI_GET_TARGET_INFO                8
+        /*
+         * Semantics: Fetch the 4-byte Target information
+         * Request format:
+         *    A_UINT32      command (BMI_GET_TARGET_ID/INFO)
+         * Response format1 (old firmware):
+         *    A_UINT32      TargetVersionID
+         * Response format2 (newer firmware):
+         *    A_UINT32      TARGET_VERSION_SENTINAL
+         *    struct bmi_target_info;
+         */
+
+struct bmi_target_info {
+    A_UINT32 target_info_byte_count; /* size of this structure */
+    A_UINT32 target_ver;             /* Target Version ID */
+    A_UINT32 target_type;            /* Target type */
+};
+#define TARGET_VERSION_SENTINAL 0xffffffff
+#define TARGET_TYPE_AR6001 1
+#define TARGET_TYPE_AR6002 2
+
+
+#define BMI_ROMPATCH_INSTALL               9
+        /*
+         * Semantics: Install a ROM Patch.
+         * Request format:
+         *    A_UINT32      command (BMI_ROMPATCH_INSTALL)
+         *    A_UINT32      Target ROM Address
+         *    A_UINT32      Target RAM Address
+         *    A_UINT32      Size, in bytes
+         *    A_UINT32      Activate? 1-->activate;
+         *                            0-->install but do not activate
+         * Response format:
+         *    A_UINT32      PatchID
+         */
+
+#define BMI_ROMPATCH_UNINSTALL             10
+        /*
+         * Semantics: Uninstall a previously-installed ROM Patch,
+         * automatically deactivating, if necessary.
+         * Request format:
+         *    A_UINT32      command (BMI_ROMPATCH_UNINSTALL)
+         *    A_UINT32      PatchID
+         *
+         * Response format: none
+         */
+
+#define BMI_ROMPATCH_ACTIVATE              11
+        /*
+         * Semantics: Activate a list of previously-installed ROM Patches.
+         * Request format:
+         *    A_UINT32      command (BMI_ROMPATCH_ACTIVATE)
+         *    A_UINT32      rompatch_count
+         *    A_UINT32      PatchID[rompatch_count]
+         *
+         * Response format: none
+         */
+
+#define BMI_ROMPATCH_DEACTIVATE            12
+        /*
+         * Semantics: Deactivate a list of active ROM Patches.
+         * Request format:
+         *    A_UINT32      command (BMI_ROMPATCH_DEACTIVATE)
+         *    A_UINT32      rompatch_count
+         *    A_UINT32      PatchID[rompatch_count]
+         *
+         * Response format: none
+         */
+
+
+#endif /* __BMI_MSG_H__ */
diff --git a/drivers/ar6000/include/common_drv.h b/drivers/ar6000/include/common_drv.h
new file mode 100644
index 00000000000..1bdc3dae5ca
--- /dev/null
+++ b/drivers/ar6000/include/common_drv.h
@@ -0,0 +1,61 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+
+#ifndef COMMON_DRV_H_
+#define COMMON_DRV_H_
+
+#include "hif.h"
+#include "htc_packet.h"
+
+
+
+/* structure that is the state information for the default credit distribution callback
+ * drivers should instantiate (zero-init as well) this structure in their driver instance
+ * and pass it as a context to the HTC credit distribution functions */
+typedef struct _COMMON_CREDIT_STATE_INFO {
+    int TotalAvailableCredits;      /* total credits in the system at startup */
+    int CurrentFreeCredits;         /* credits available in the pool that have not been
+                                       given out to endpoints */
+    HTC_ENDPOINT_CREDIT_DIST *pLowestPriEpDist;  /* pointer to the lowest priority endpoint dist struct */
+} COMMON_CREDIT_STATE_INFO;
+
+
+/* HTC TX packet tagging definitions */
+#define AR6K_CONTROL_PKT_TAG    HTC_TX_PACKET_TAG_USER_DEFINED
+#define AR6K_DATA_PKT_TAG       (AR6K_CONTROL_PKT_TAG + 1)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* OS-independent APIs */
+A_STATUS ar6000_setup_credit_dist(HTC_HANDLE HTCHandle, COMMON_CREDIT_STATE_INFO *pCredInfo);
+A_STATUS ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+A_STATUS ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+A_STATUS ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,  A_UCHAR *data, A_UINT32 length);
+A_STATUS ar6000_reset_device(HIF_DEVICE *hifDevice, A_UINT32 TargetType);
+void ar6000_dump_target_assert_info(HIF_DEVICE *hifDevice, A_UINT32 TargetType);
+A_STATUS ar6000_reset_device_skipflash(HIF_DEVICE *hifDevice);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*COMMON_DRV_H_*/
diff --git a/drivers/ar6000/include/dbglog.h b/drivers/ar6000/include/dbglog.h
new file mode 100644
index 00000000000..3d1e528f757
--- /dev/null
+++ b/drivers/ar6000/include/dbglog.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains the definitions and data structures associated with
+ * the log based debug mechanism.
+ *
+ */
+
+#ifndef _DBGLOG_H_
+#define _DBGLOG_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define DBGLOG_TIMESTAMP_OFFSET          0
+#define DBGLOG_TIMESTAMP_MASK            0x0000FFFF /* Bit 0-15. Contains bit
+                                                       8-23 of the LF0 timer */
+#define DBGLOG_DBGID_OFFSET              16
+#define DBGLOG_DBGID_MASK                0x03FF0000 /* Bit 16-25 */
+#define DBGLOG_DBGID_NUM_MAX             256 /* Upper limit is width of mask */
+
+#define DBGLOG_MODULEID_OFFSET           26
+#define DBGLOG_MODULEID_MASK             0x3C000000 /* Bit 26-29 */
+#define DBGLOG_MODULEID_NUM_MAX          16 /* Upper limit is width of mask */
+
+/*
+ * Please ensure that the definition of any new module intrduced is captured
+ * between the DBGLOG_MODULEID_START and DBGLOG_MODULEID_END defines. The
+ * structure is required for the parser to correctly pick up the values for
+ * different modules.
+ */
+#define DBGLOG_MODULEID_START
+#define DBGLOG_MODULEID_INF                   0
+#define DBGLOG_MODULEID_WMI                   1
+#define DBGLOG_MODULEID_CSERV                 2
+#define DBGLOG_MODULEID_PM                    3
+#define DBGLOG_MODULEID_TXRX_MGMTBUF          4
+#define DBGLOG_MODULEID_TXRX_TXBUF            5
+#define DBGLOG_MODULEID_TXRX_RXBUF            6
+#define DBGLOG_MODULEID_WOW                   7
+#define DBGLOG_MODULEID_WHAL                  8
+#define DBGLOG_MODULEID_END
+
+#define DBGLOG_NUM_ARGS_OFFSET             30
+#define DBGLOG_NUM_ARGS_MASK               0xC0000000 /* Bit 30-31 */
+#define DBGLOG_NUM_ARGS_MAX                2 /* Upper limit is width of mask */
+
+#define DBGLOG_MODULE_LOG_ENABLE_OFFSET    0
+#define DBGLOG_MODULE_LOG_ENABLE_MASK      0x0000FFFF
+
+#define DBGLOG_REPORTING_ENABLED_OFFSET    16
+#define DBGLOG_REPORTING_ENABLED_MASK      0x00010000
+
+#define DBGLOG_TIMESTAMP_RESOLUTION_OFFSET 17
+#define DBGLOG_TIMESTAMP_RESOLUTION_MASK   0x000E0000
+
+#define DBGLOG_REPORT_SIZE_OFFSET          20
+#define DBGLOG_REPORT_SIZE_MASK            0x3FF00000
+
+#define DBGLOG_LOG_BUFFER_SIZE             1500
+#define DBGLOG_DBGID_DEFINITION_LEN_MAX    64
+
+struct dbglog_buf_s {
+    struct dbglog_buf_s *next;
+    A_INT8              *buffer;
+    A_UINT32             bufsize;
+    A_UINT32             length;
+    A_UINT32             count;
+    A_UINT32             free;
+};
+
+struct dbglog_hdr_s {
+    struct dbglog_buf_s *dbuf;
+    A_UINT32             dropped;
+};
+
+struct dbglog_config_s {
+    A_UINT32                    cfgvalid; /* Mask with valid config bits */
+    union {
+        /* TODO: Take care of endianness */
+        struct {
+            A_UINT32            mmask:16; /* Mask of modules with logging on */
+            A_UINT32            rep:1; /* Reporting enabled or not */
+            A_UINT32            tsr:3; /* Time stamp resolution. Def: 1 ms */
+            A_UINT32            size:10; /* Report size in number of messages */
+            A_UINT32            reserved:2;
+        } dbglog_config;
+
+        A_UINT32                value;
+    } u;
+};
+
+#define cfgmmask                   u.dbglog_config.mmask
+#define cfgrep                     u.dbglog_config.rep
+#define cfgtsr                     u.dbglog_config.tsr
+#define cfgsize                    u.dbglog_config.size
+#define cfgvalue                   u.value
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _DBGLOG_H_ */
diff --git a/drivers/ar6000/include/dbglog_api.h b/drivers/ar6000/include/dbglog_api.h
new file mode 100644
index 00000000000..06c8102e12b
--- /dev/null
+++ b/drivers/ar6000/include/dbglog_api.h
@@ -0,0 +1,46 @@
+#ifndef _DBGLOG_API_H_
+#define _DBGLOG_API_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ * This file contains host side debug primitives.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "dbglog.h"
+
+#define DBGLOG_HOST_LOG_BUFFER_SIZE            DBGLOG_LOG_BUFFER_SIZE
+
+#define DBGLOG_GET_DBGID(arg) \
+    ((arg & DBGLOG_DBGID_MASK) >> DBGLOG_DBGID_OFFSET)
+
+#define DBGLOG_GET_MODULEID(arg) \
+    ((arg & DBGLOG_MODULEID_MASK) >> DBGLOG_MODULEID_OFFSET)
+
+#define DBGLOG_GET_NUMARGS(arg) \
+    ((arg & DBGLOG_NUM_ARGS_MASK) >> DBGLOG_NUM_ARGS_OFFSET)
+
+#define DBGLOG_GET_TIMESTAMP(arg) \
+    ((arg & DBGLOG_TIMESTAMP_MASK) >> DBGLOG_TIMESTAMP_OFFSET)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _DBGLOG_API_H_ */
diff --git a/drivers/ar6000/include/dbglog_id.h b/drivers/ar6000/include/dbglog_id.h
new file mode 100644
index 00000000000..ce22b168242
--- /dev/null
+++ b/drivers/ar6000/include/dbglog_id.h
@@ -0,0 +1,307 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains the definitions of the debug identifiers for different
+ * modules.
+ *
+ */
+
+#ifndef _DBGLOG_ID_H_
+#define _DBGLOG_ID_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * The nomenclature for the debug identifiers is MODULE_DESCRIPTION.
+ * Please ensure that the definition of any new debugid introduced is captured
+ * between the <MODULE>_DBGID_DEFINITION_START and
+ * <MODULE>_DBGID_DEFINITION_END defines. The structure is required for the
+ * parser to correctly pick up the values for different debug identifiers.
+ */
+
+/* INF debug identifier definitions */
+#define INF_DBGID_DEFINITION_START
+#define INF_ASSERTION_FAILED                          1
+#define INF_TARGET_ID                                 2
+#define INF_DBGID_DEFINITION_END
+
+/* WMI debug identifier definitions */
+#define WMI_DBGID_DEFINITION_START
+#define WMI_CMD_RX_XTND_PKT_TOO_SHORT                 1
+#define WMI_EXTENDED_CMD_NOT_HANDLED                  2
+#define WMI_CMD_RX_PKT_TOO_SHORT                      3
+#define WMI_CALLING_WMI_EXTENSION_FN                  4
+#define WMI_CMD_NOT_HANDLED                           5
+#define WMI_IN_SYNC                                   6
+#define WMI_TARGET_WMI_SYNC_CMD                       7
+#define WMI_SET_SNR_THRESHOLD_PARAMS                  8
+#define WMI_SET_RSSI_THRESHOLD_PARAMS                 9
+#define WMI_SET_LQ_TRESHOLD_PARAMS                   10
+#define WMI_TARGET_CREATE_PSTREAM_CMD                11
+#define WMI_WI_DTM_INUSE                             12
+#define WMI_TARGET_DELETE_PSTREAM_CMD                13
+#define WMI_TARGET_IMPLICIT_DELETE_PSTREAM_CMD       14
+#define WMI_TARGET_GET_BIT_RATE_CMD                  15
+#define WMI_GET_RATE_MASK_CMD_FIX_RATE_MASK_IS       16
+#define WMI_TARGET_GET_AVAILABLE_CHANNELS_CMD        17
+#define WMI_TARGET_GET_TX_PWR_CMD                    18
+#define WMI_FREE_EVBUF_WMIBUF                        19
+#define WMI_FREE_EVBUF_DATABUF                       20
+#define WMI_FREE_EVBUF_BADFLAG                       21
+#define WMI_HTC_RX_ERROR_DATA_PACKET                 22
+#define WMI_HTC_RX_SYNC_PAUSING_FOR_MBOX             23
+#define WMI_INCORRECT_WMI_DATA_HDR_DROPPING_PKT      24
+#define WMI_SENDING_READY_EVENT                      25
+#define WMI_SETPOWER_MDOE_TO_MAXPERF                 26
+#define WMI_SETPOWER_MDOE_TO_REC                     27
+#define WMI_BSSINFO_EVENT_FROM                       28
+#define WMI_TARGET_GET_STATS_CMD                     29
+#define WMI_SENDING_SCAN_COMPLETE_EVENT              30
+#define WMI_SENDING_RSSI_INDB_THRESHOLD_EVENT        31
+#define WMI_SENDING_RSSI_INDBM_THRESHOLD_EVENT       32
+#define WMI_SENDING_LINK_QUALITY_THRESHOLD_EVENT     33
+#define WMI_SENDING_ERROR_REPORT_EVENT               34
+#define WMI_SENDING_CAC_EVENT                        35
+#define WMI_TARGET_GET_ROAM_TABLE_CMD                36
+#define WMI_TARGET_GET_ROAM_DATA_CMD                 37
+#define WMI_SENDING_GPIO_INTR_EVENT                  38
+#define WMI_SENDING_GPIO_ACK_EVENT                   39
+#define WMI_SENDING_GPIO_DATA_EVENT                  40
+#define WMI_CMD_RX                                   41
+#define WMI_CMD_RX_XTND                              42
+#define WMI_EVENT_SEND                               43
+#define WMI_EVENT_SEND_XTND                          44
+#define WMI_DBGID_DEFINITION_END
+
+/* CSERV debug identifier definitions */
+#define CSERV_DBGID_DEFINITION_START
+#define CSERV_BEGIN_SCAN1                             1
+#define CSERV_BEGIN_SCAN2                             2
+#define CSERV_END_SCAN1                               3
+#define CSERV_END_SCAN2                               4
+#define CSERV_CHAN_SCAN_START                         5
+#define CSERV_CHAN_SCAN_STOP                          6
+#define CSERV_CHANNEL_OPPPORTUNITY                    7
+#define CSERV_NC_TIMEOUT                              8
+#define CSERV_BACK_HOME                              10
+#define CSERV_CHMGR_CH_CALLBACK1                     11
+#define CSERV_CHMGR_CH_CALLBACK2                     12
+#define CSERV_CHMGR_CH_CALLBACK3                     13
+#define CSERV_SET_SCAN_PARAMS1                       14
+#define CSERV_SET_SCAN_PARAMS2                       15
+#define CSERV_SET_SCAN_PARAMS3                       16
+#define CSERV_SET_SCAN_PARAMS4                       17
+#define CSERV_ABORT_SCAN                             18
+#define CSERV_NEWSTATE                               19
+#define CSERV_MINCHMGR_OP_END                        20
+#define CSERV_CHMGR_OP_END                           21
+#define CSERV_DISCONNECT_TIMEOUT                     22
+#define CSERV_ROAM_TIMEOUT                           23
+#define CSERV_FORCE_SCAN1                            24
+#define CSERV_FORCE_SCAN2                            25
+#define CSERV_FORCE_SCAN3                            26
+#define CSERV_UTIL_TIMEOUT                           27
+#define CSERV_RSSIPOLLER                             28
+#define CSERV_RETRY_CONNECT_TIMEOUT                  29
+#define CSERV_RSSIINDBMPOLLER                        30
+#define CSERV_BGSCAN_ENABLE                          31
+#define CSERV_BGSCAN_DISABLE                         32
+#define CSERV_WLAN_START_SCAN_CMD1                   33
+#define CSERV_WLAN_START_SCAN_CMD2                   34
+#define CSERV_WLAN_START_SCAN_CMD3                   35
+#define CSERV_START_SCAN_CMD                         36
+#define CSERV_START_FORCE_SCAN                       37
+#define CSERV_NEXT_CHAN                              38
+#define CSERV_SET_REGCODE                            39
+#define CSERV_START_ADHOC                            40
+#define CSERV_ADHOC_AT_HOME                          41
+#define CSERV_OPT_AT_HOME                            42
+#define CSERV_WLAN_CONNECT_CMD                       43
+#define CSERV_WLAN_RECONNECT_CMD                     44
+#define CSERV_WLAN_DISCONNECT_CMD                    45
+#define CSERV_BSS_CHANGE_CHANNEL                     46
+#define CSERV_BEACON_RX                              47
+#define CSERV_KEEPALIVE_CHECK                        48
+#define CSERV_RC_BEGIN_SCAN                          49
+#define CSERV_RC_SCAN_START                          50
+#define CSERV_RC_SCAN_STOP                           51
+#define CSERV_RC_NEXT                                52
+#define CSERV_RC_SCAN_END                            53
+#define CSERV_PROBE_CALLBACK                         54
+#define CSERV_ROAM1                                  55
+#define CSERV_ROAM2                                  56
+#define CSERV_ROAM3                                  57
+#define CSERV_CONNECT_EVENT                          58
+#define CSERV_DISCONNECT_EVENT                       59
+#define CSERV_BMISS_HANDLER1                         60
+#define CSERV_BMISS_HANDLER2                         61
+#define CSERV_BMISS_HANDLER3                         62
+#define CSERV_LOWRSSI_HANDLER                        63
+#define CSERV_WLAN_SET_PMKID_CMD                     64
+#define CSERV_RECONNECT_REQUEST                      65
+#define CSERV_KEYSPLUMBED_EVENT                      66
+#define CSERV_NEW_REG                                67
+#define CSERV_SET_RSSI_THOLD                         68
+#define CSERV_RSSITHRESHOLDCHECK                     69
+#define CSERV_RSSIINDBMTHRESHOLDCHECK                70
+#define CSERV_WLAN_SET_OPT_CMD1                      71
+#define CSERV_WLAN_SET_OPT_CMD2                      72
+#define CSERV_WLAN_SET_OPT_CMD3                      73
+#define CSERV_WLAN_SET_OPT_CMD4                      74
+#define CSERV_SCAN_CONNECT_STOP                      75
+#define CSERV_BMISS_HANDLER4                         76
+#define CSERV_INITIALIZE_TIMER                       77
+#define CSERV_ARM_TIMER                              78
+#define CSERV_DISARM_TIMER                           79
+#define CSERV_UNINITIALIZE_TIMER                     80
+#define CSERV_DISCONNECT_EVENT2                      81
+#define CSERV_SCAN_CONNECT_START                     82
+#define CSERV_BSSINFO_MEMORY_ALLOC_FAILED            83
+#define CSERV_SET_SCAN_PARAMS5                       84
+#define CSERV_DBGID_DEFINITION_END
+
+/* TXRX debug identifier definitions */
+#define TXRX_TXBUF_DBGID_DEFINITION_START
+#define TXRX_TXBUF_ALLOCATE_BUF                      1
+#define TXRX_TXBUF_QUEUE_BUF_TO_MBOX                 2
+#define TXRX_TXBUF_QUEUE_BUF_TO_TXQ                  3
+#define TXRX_TXBUF_TXQ_DEPTH                         4
+#define TXRX_TXBUF_IBSS_QUEUE_TO_SFQ                 5
+#define TXRX_TXBUF_IBSS_QUEUE_TO_TXQ_FRM_SFQ         6
+#define TXRX_TXBUF_INITIALIZE_TIMER                  7
+#define TXRX_TXBUF_ARM_TIMER                         8
+#define TXRX_TXBUF_DISARM_TIMER                      9
+#define TXRX_TXBUF_UNINITIALIZE_TIMER                10
+#define TXRX_TXBUF_DBGID_DEFINITION_END
+
+#define TXRX_RXBUF_DBGID_DEFINITION_START
+#define TXRX_RXBUF_ALLOCATE_BUF                      1
+#define TXRX_RXBUF_QUEUE_TO_HOST                     2
+#define TXRX_RXBUF_QUEUE_TO_WLAN                     3
+#define TXRX_RXBUF_ZERO_LEN_BUF                      4
+#define TXRX_RXBUF_QUEUE_TO_HOST_LASTBUF_IN_RXCHAIN  5
+#define TXRX_RXBUF_LASTBUF_IN_RXCHAIN_ZEROBUF        6
+#define TXRX_RXBUF_QUEUE_EMPTY_QUEUE_TO_WLAN         7
+#define TXRX_RXBUF_SEND_TO_RECV_MGMT                 8
+#define TXRX_RXBUF_SEND_TO_IEEE_LAYER                9
+#define TXRX_RXBUF_DBGID_DEFINITION_END
+
+#define TXRX_MGMTBUF_DBGID_DEFINITION_START
+#define TXRX_MGMTBUF_ALLOCATE_BUF                    1
+#define TXRX_MGMTBUF_ALLOCATE_SM_BUF                 2
+#define TXRX_MGMTBUF_ALLOCATE_RMBUF                  3
+#define TXRX_MGMTBUF_GET_BUF                         4
+#define TXRX_MGMTBUF_GET_SM_BUF                      5
+#define TXRX_MGMTBUF_QUEUE_BUF_TO_TXQ                6
+#define TXRX_MGMTBUF_REAPED_BUF                      7
+#define TXRX_MGMTBUF_REAPED_SM_BUF                   8
+#define TXRX_MGMTBUF_WAIT_FOR_TXQ_DRAIN              9
+#define TXRX_MGMTBUF_WAIT_FOR_TXQ_SFQ_DRAIN          10
+#define TXRX_MGMTBUF_ENQUEUE_INTO_SFQ                11
+#define TXRX_MGMTBUF_DEQUEUE_FROM_SFQ                12
+#define TXRX_MGMTBUF_PAUSE_TXQ                       13
+#define TXRX_MGMTBUF_RESUME_TXQ                      14
+#define TXRX_MGMTBUF_WAIT_FORTXQ_DRAIN_TIMEOUT       15
+#define TXRX_MGMTBUF_DRAINQ                          16
+#define TXRX_MGMTBUF_INDICATE_Q_DRAINED              17
+#define TXRX_MGMTBUF_DBGID_DEFINITION_END
+
+/* PM (Power Module) debug identifier definitions */
+#define PM_DBGID_DEFINITION_START
+#define PM_INIT                                      1
+#define PM_ENABLE                                    2
+#define PM_SET_STATE                                 3
+#define PM_SET_POWERMODE                             4
+#define PM_CONN_NOTIFY                               5
+#define PM_REF_COUNT_NEGATIVE                        6
+#define PM_APSD_ENABLE                               7
+#define PM_UPDATE_APSD_STATE                         8
+#define PM_CHAN_OP_REQ                               9
+#define PM_SET_MY_BEACON_POLICY                      10
+#define PM_SET_ALL_BEACON_POLICY                     11
+#define PM_SET_PM_PARAMS1                            12
+#define PM_SET_PM_PARAMS2                            13
+#define PM_ADHOC_SET_PM_CAPS_FAIL                    14
+#define PM_ADHOC_UNKNOWN_IBSS_ATTRIB_ID              15
+#define PM_DBGID_DEFINITION_END
+
+/* Wake on Wireless debug identifier definitions */
+#define WOW_DBGID_DEFINITION_START
+#define WOW_INIT                                        1
+#define WOW_GET_CONFIG_DSET                             2
+#define WOW_NO_CONFIG_DSET                              3
+#define WOW_INVALID_CONFIG_DSET                         4
+#define WOW_USE_DEFAULT_CONFIG                          5
+#define WOW_SETUP_GPIO                                  6
+#define WOW_INIT_DONE                                   7
+#define WOW_SET_GPIO_PIN                                8
+#define WOW_CLEAR_GPIO_PIN                              9
+#define WOW_SET_WOW_MODE_CMD                            10
+#define WOW_SET_HOST_MODE_CMD                           11
+#define WOW_ADD_WOW_PATTERN_CMD                         12
+#define WOW_NEW_WOW_PATTERN_AT_INDEX                    13
+#define WOW_DEL_WOW_PATTERN_CMD                         14
+#define WOW_LIST_CONTAINS_PATTERNS                      15
+#define WOW_GET_WOW_LIST_CMD                            16
+#define WOW_INVALID_FILTER_ID                           17
+#define WOW_INVALID_FILTER_LISTID                       18
+#define WOW_NO_VALID_FILTER_AT_ID                       19
+#define WOW_NO_VALID_LIST_AT_ID                         20
+#define WOW_NUM_PATTERNS_EXCEEDED                       21
+#define WOW_NUM_LISTS_EXCEEDED                          22
+#define WOW_GET_WOW_STATS                               23
+#define WOW_CLEAR_WOW_STATS                             24
+#define WOW_WAKEUP_HOST                                 25
+#define WOW_EVENT_WAKEUP_HOST                           26
+#define WOW_EVENT_DISCARD                               27
+#define WOW_PATTERN_MATCH                               28
+#define WOW_PATTERN_NOT_MATCH                           29
+#define WOW_PATTERN_NOT_MATCH_OFFSET                    30
+#define WOW_DISABLED_HOST_ASLEEP                        31
+#define WOW_ENABLED_HOST_ASLEEP_NO_PATTERNS             32
+#define WOW_ENABLED_HOST_ASLEEP_NO_MATCH_FOUND          33
+#define WOW_DBGID_DEFINITION_END
+
+/* WHAL debug identifier definitions */
+#define WHAL_DBGID_DEFINITION_START
+#define WHAL_ERROR_ANI_CONTROL                      1
+#define WHAL_ERROR_CHIP_TEST1                       2
+#define WHAL_ERROR_CHIP_TEST2                       3
+#define WHAL_ERROR_EEPROM_CHECKSUM                  4
+#define WHAL_ERROR_EEPROM_MACADDR                   5
+#define WHAL_ERROR_INTERRUPT_HIU                    6
+#define WHAL_ERROR_KEYCACHE_RESET                   7
+#define WHAL_ERROR_KEYCACHE_SET                     8
+#define WHAL_ERROR_KEYCACHE_TYPE                    9
+#define WHAL_ERROR_KEYCACHE_TKIPENTRY              10
+#define WHAL_ERROR_KEYCACHE_WEPLENGTH              11
+#define WHAL_ERROR_PHY_INVALID_CHANNEL             12
+#define WHAL_ERROR_POWER_AWAKE                     13
+#define WHAL_ERROR_POWER_SET                       14
+#define WHAL_ERROR_RECV_STOPDMA                    15
+#define WHAL_ERROR_RECV_STOPPCU                    16
+#define WHAL_ERROR_RESET_CHANNF1                   17
+#define WHAL_ERROR_RESET_CHANNF2                   18
+#define WHAL_ERROR_RESET_PM                        19
+#define WHAL_ERROR_RESET_OFFSETCAL                 20
+#define WHAL_ERROR_RESET_RFGRANT                   21
+#define WHAL_ERROR_RESET_RXFRAME                   22
+#define WHAL_ERROR_RESET_STOPDMA                   23
+#define WHAL_ERROR_RESET_RECOVER                   24
+#define WHAL_ERROR_XMIT_COMPUTE                    25
+#define WHAL_ERROR_XMIT_NOQUEUE                    26
+#define WHAL_ERROR_XMIT_ACTIVEQUEUE                27
+#define WHAL_ERROR_XMIT_BADTYPE                    28
+#define WHAL_DBGID_DEFINITION_END
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _DBGLOG_ID_H_ */
diff --git a/drivers/ar6000/include/dl_list.h b/drivers/ar6000/include/dl_list.h
new file mode 100644
index 00000000000..4b9c5819854
--- /dev/null
+++ b/drivers/ar6000/include/dl_list.h
@@ -0,0 +1,114 @@
+/*
+ *
+ * Double-link list definitions (adapted from Atheros SDIO stack)
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+#ifndef __DL_LIST_H___
+#define __DL_LIST_H___
+
+#define A_CONTAINING_STRUCT(address, struct_type, field_name)\
+            ((struct_type *)((A_UINT32)(address) - (A_UINT32)(&((struct_type *)0)->field_name)))
+
+/* list functions */
+/* pointers for the list */
+typedef struct _DL_LIST {
+    struct _DL_LIST *pPrev;
+    struct _DL_LIST *pNext;
+}DL_LIST, *PDL_LIST;
+/*
+ * DL_LIST_INIT , initialize doubly linked list
+*/
+#define DL_LIST_INIT(pList)\
+    {(pList)->pPrev = pList; (pList)->pNext = pList;}
+
+#define DL_LIST_IS_EMPTY(pList) (((pList)->pPrev == (pList)) && ((pList)->pNext == (pList)))
+#define DL_LIST_GET_ITEM_AT_HEAD(pList) (pList)->pNext
+#define DL_LIST_GET_ITEM_AT_TAIL(pList) (pList)->pPrev
+/*
+ * ITERATE_OVER_LIST pStart is the list, pTemp is a temp list member
+ * NOT: do not use this function if the items in the list are deleted inside the
+ * iteration loop
+*/
+#define ITERATE_OVER_LIST(pStart, pTemp) \
+    for((pTemp) =(pStart)->pNext; pTemp != (pStart); (pTemp) = (pTemp)->pNext)
+
+
+/* safe iterate macro that allows the item to be removed from the list
+ * the iteration continues to the next item in the list
+ */
+#define ITERATE_OVER_LIST_ALLOW_REMOVE(pStart,pItem,st,offset)  \
+{                                                       \
+    PDL_LIST  pTemp;                                     \
+    pTemp = (pStart)->pNext;                            \
+    while (pTemp != (pStart)) {                         \
+        (pItem) = A_CONTAINING_STRUCT(pTemp,st,offset);   \
+         pTemp = pTemp->pNext;                          \
+
+#define ITERATE_END }}
+
+/*
+ * DL_ListInsertTail - insert pAdd to the end of the list
+*/
+static INLINE PDL_LIST DL_ListInsertTail(PDL_LIST pList, PDL_LIST pAdd) {
+        /* insert at tail */
+    pAdd->pPrev = pList->pPrev;
+    pAdd->pNext = pList;
+    pList->pPrev->pNext = pAdd;
+    pList->pPrev = pAdd;
+    return pAdd;
+}
+
+/*
+ * DL_ListInsertHead - insert pAdd into the head of the list
+*/
+static INLINE PDL_LIST DL_ListInsertHead(PDL_LIST pList, PDL_LIST pAdd) {
+        /* insert at head */
+    pAdd->pPrev = pList;
+    pAdd->pNext = pList->pNext;
+    pList->pNext->pPrev = pAdd;
+    pList->pNext = pAdd;
+    return pAdd;
+}
+
+#define DL_ListAdd(pList,pItem) DL_ListInsertHead((pList),(pItem))
+/*
+ * DL_ListRemove - remove pDel from list
+*/
+static INLINE PDL_LIST DL_ListRemove(PDL_LIST pDel) {
+    pDel->pNext->pPrev = pDel->pPrev;
+    pDel->pPrev->pNext = pDel->pNext;
+        /* point back to itself just to be safe, incase remove is called again */
+    pDel->pNext = pDel;
+    pDel->pPrev = pDel;
+    return pDel;
+}
+
+/*
+ * DL_ListRemoveItemFromHead - get a list item from the head
+*/
+static INLINE PDL_LIST DL_ListRemoveItemFromHead(PDL_LIST pList) {
+    PDL_LIST pItem = NULL;
+    if (pList->pNext != pList) {
+        pItem = pList->pNext;
+            /* remove the first item from head */
+        DL_ListRemove(pItem);
+    }
+    return pItem;
+}
+
+#endif /* __DL_LIST_H___ */
diff --git a/drivers/ar6000/include/dset_api.h b/drivers/ar6000/include/dset_api.h
new file mode 100644
index 00000000000..de5cc6a66e0
--- /dev/null
+++ b/drivers/ar6000/include/dset_api.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/dset_api.h#1 $
+ *
+ * Host-side DataSet API.
+ *
+ */
+
+#ifndef _DSET_API_H_
+#define _DSET_API_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/*
+ * Host-side DataSet support is optional, and is not
+ * currently required for correct operation.  To disable
+ * Host-side DataSet support, set this to 0.
+ */
+#ifndef CONFIG_HOST_DSET_SUPPORT
+#define CONFIG_HOST_DSET_SUPPORT 1
+#endif
+
+/* Called to send a DataSet Open Reply back to the Target. */
+A_STATUS wmi_dset_open_reply(struct wmi_t *wmip,
+                             A_UINT32 status,
+                             A_UINT32 access_cookie,
+                             A_UINT32 size,
+                             A_UINT32 version,
+                             A_UINT32 targ_handle,
+                             A_UINT32 targ_reply_fn,
+                             A_UINT32 targ_reply_arg);
+
+/* Called to send a DataSet Data Reply back to the Target. */
+A_STATUS wmi_dset_data_reply(struct wmi_t *wmip,
+                             A_UINT32 status,
+                             A_UINT8 *host_buf,
+                             A_UINT32 length,
+                             A_UINT32 targ_buf,
+                             A_UINT32 targ_reply_fn,
+                             A_UINT32 targ_reply_arg);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+
+#endif /* _DSET_API_H_ */
diff --git a/drivers/ar6000/include/dset_internal.h b/drivers/ar6000/include/dset_internal.h
new file mode 100644
index 00000000000..f0be380e692
--- /dev/null
+++ b/drivers/ar6000/include/dset_internal.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __DSET_INTERNAL_H__
+#define __DSET_INTERNAL_H__
+
+/*
+ * Internal dset definitions, common for DataSet layer.
+ */
+
+#define DSET_TYPE_STANDARD      0
+#define DSET_TYPE_BPATCHED      1
+#define DSET_TYPE_COMPRESSED    2
+
+/* Dataset descriptor */
+
+typedef struct dset_descriptor_s {
+  struct dset_descriptor_s  *next;         /* List link. NULL only at the last
+                                              descriptor */
+  A_UINT16                   id;           /* Dset ID */
+  A_UINT16                   size;         /* Dset size. */
+  void                      *DataPtr;      /* Pointer to raw data for standard
+                                              DataSet or pointer to original
+                                              dset_descriptor for patched
+                                              DataSet */
+  A_UINT32                   data_type;    /* DSET_TYPE_*, above */
+
+  void                      *AuxPtr;       /* Additional data that might
+                                              needed for data_type. For
+                                              example, pointer to patch
+                                              Dataset descriptor for BPatch. */
+} dset_descriptor_t;
+
+#endif /* __DSET_INTERNAL_H__ */
diff --git a/drivers/ar6000/include/dsetid.h b/drivers/ar6000/include/dsetid.h
new file mode 100644
index 00000000000..85729f8b3d0
--- /dev/null
+++ b/drivers/ar6000/include/dsetid.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __DSETID_H__
+#define __DSETID_H__
+
+/* Well-known DataSet IDs */
+#define DSETID_UNUSED                     0x00000000
+#define DSETID_BOARD_DATA                 0x00000001 /* Cal and board data */
+#define DSETID_REGDB                      0x00000002 /* Regulatory Database */
+#define DSETID_POWER_CONTROL              0x00000003 /* TX Pwr Lim & Ant Gain */
+#define DSETID_USER_CONFIG                0x00000004 /* User Configuration */
+
+#define DSETID_ANALOG_CONTROL_DATA_START  0x00000005
+#define DSETID_ANALOG_CONTROL_DATA_END    0x00000025
+/*
+ * Get DSETID for various reference clock speeds.
+ * For each speed there are three DataSets that correspond
+ * to the three columns of bank6 data (addr, 11a, 11b/g).
+ * This macro returns the dsetid of the first of those
+ * three DataSets.
+ */
+#define ANALOG_CONTROL_DATA_DSETID(refclk) \
+        (DSETID_ANALOG_CONTROL_DATA_START + 3*refclk)
+
+/*
+ * There are TWO STARTUP_PATCH DataSets.
+ * DSETID_STARTUP_PATCH is historical, and was applied before BMI on
+ * earlier systems.  On AR6002, it is applied after BMI, just like
+ * DSETID_STARTUP_PATCH2.
+ */
+#define DSETID_STARTUP_PATCH              0x00000026
+#define DSETID_GPIO_CONFIG_PATCH          0x00000027
+#define DSETID_WLANREGS                   0x00000028 /* override wlan regs */
+#define DSETID_STARTUP_PATCH2             0x00000029
+
+#define DSETID_WOW_CONFIG                 0x00000090 /* WoW Configuration */
+
+/* Add WHAL_INI_DATA_ID to DSETID_INI_DATA for a specific WHAL INI table. */
+#define DSETID_INI_DATA                   0x00000100
+/* Reserved for WHAL INI Tables: 0x100..0x11f */
+#define DSETID_INI_DATA_END               0x0000011f
+
+#define DSETID_VENDOR_START               0x00010000 /* Vendor-defined DataSets */
+
+#define DSETID_INDEX_END                  0xfffffffe /* Reserved to indicate the
+                                                        end of a memory-based
+                                                        DataSet Index */
+#define DSETID_INDEX_FREE                 0xffffffff /* An unused index entry */
+
+/*
+ * PATCH DataSet format:
+ * A list of patches, terminated by a patch with
+ * address=PATCH_END.
+ *
+ * This allows for patches to be stored in flash.
+ */
+struct patch_s {
+    A_UINT32 *address;
+    A_UINT32  data;
+};
+
+/*
+ * Skip some patches.  Can be used to erase a single patch in a
+ * patch DataSet without having to re-write the DataSet.  May
+ * also be used to embed information for use by subsequent
+ * patch code.  The "data" in a PATCH_SKIP tells how many
+ * bytes of length "patch_s" to skip.
+ */
+#define PATCH_SKIP      ((A_UINT32 *)0x00000000)
+
+/*
+ * Execute code at the address specified by "data".
+ * The address of the patch structure is passed as
+ * the one parameter.
+ */
+#define PATCH_CODE_ABS  ((A_UINT32 *)0x00000001)
+
+/*
+ * Same as PATCH_CODE_ABS, but treat "data" as an
+ * offset from the start of the patch word.
+ */
+#define PATCH_CODE_REL  ((A_UINT32 *)0x00000002)
+
+/* Mark the end of this patch DataSet. */
+#define PATCH_END       ((A_UINT32 *)0xffffffff)
+
+/*
+ * A DataSet which contains a Binary Patch to some other DataSet
+ * uses the original dsetid with the DSETID_BPATCH_FLAG bit set.
+ * Such a BPatch DataSet consists of BPatch metadata followed by
+ * the bdiff bytes.  BPatch metadata consists of a single 32-bit
+ * word that contains the size of the BPatched final image.
+ *
+ * To create a suitable bdiff DataSet, use bdiff in host/tools/bdiff
+ * to create "diffs":
+ *  bdiff -q -O -nooldmd5 -nonewmd5 -d ORIGfile NEWfile diffs
+ * Then add BPatch metadata to the start of "diffs".
+ *
+ * NB: There are some implementation-induced restrictions
+ * on which DataSets can be BPatched.
+ */
+#define DSETID_BPATCH_FLAG                0x80000000
+
+#endif /* __DSETID_H__ */
diff --git a/drivers/ar6000/include/gpio.h b/drivers/ar6000/include/gpio.h
new file mode 100644
index 00000000000..2203c7e012a
--- /dev/null
+++ b/drivers/ar6000/include/gpio.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#if defined(AR6001)
+#define GPIO_PIN_COUNT 18
+#else
+#define GPIO_PIN_COUNT 18
+#endif
+
+/*
+ * Possible values for WMIX_GPIO_SET_REGISTER_CMDID.
+ * NB: These match hardware order, so that addresses can
+ * easily be computed.
+ */
+#define GPIO_ID_OUT             0x00000000
+#define GPIO_ID_OUT_W1TS        0x00000001
+#define GPIO_ID_OUT_W1TC        0x00000002
+#define GPIO_ID_ENABLE          0x00000003
+#define GPIO_ID_ENABLE_W1TS     0x00000004
+#define GPIO_ID_ENABLE_W1TC     0x00000005
+#define GPIO_ID_IN              0x00000006
+#define GPIO_ID_STATUS          0x00000007
+#define GPIO_ID_STATUS_W1TS     0x00000008
+#define GPIO_ID_STATUS_W1TC     0x00000009
+#define GPIO_ID_PIN0            0x0000000a
+#define GPIO_ID_PIN(n)          (GPIO_ID_PIN0+(n))
+
+#define GPIO_LAST_REGISTER_ID   GPIO_ID_PIN(17)
+#define GPIO_ID_NONE            0xffffffff
diff --git a/drivers/ar6000/include/gpio_api.h b/drivers/ar6000/include/gpio_api.h
new file mode 100644
index 00000000000..8078aa57ff8
--- /dev/null
+++ b/drivers/ar6000/include/gpio_api.h
@@ -0,0 +1,57 @@
+#ifndef _GPIO_API_H_
+#define _GPIO_API_H_
+/*
+ * Copyright 2005 Atheros Communications, Inc.,  All Rights Reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/*
+ * Host-side General Purpose I/O API.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/gpio_api.h#1 $
+ */
+
+/*
+ * Send a command to the Target in order to change output on GPIO pins.
+ */
+A_STATUS wmi_gpio_output_set(struct wmi_t *wmip,
+                             A_UINT32 set_mask,
+                             A_UINT32 clear_mask,
+                             A_UINT32 enable_mask,
+                             A_UINT32 disable_mask);
+
+/*
+ * Send a command to the Target requesting input state of GPIO pins.
+ */
+A_STATUS wmi_gpio_input_get(struct wmi_t *wmip);
+
+/*
+ * Send a command to the Target to change the value of a GPIO register.
+ */
+A_STATUS wmi_gpio_register_set(struct wmi_t *wmip,
+                               A_UINT32 gpioreg_id,
+                               A_UINT32 value);
+
+/*
+ * Send a command to the Target to fetch the value of a GPIO register.
+ */
+A_STATUS wmi_gpio_register_get(struct wmi_t *wmip, A_UINT32 gpioreg_id);
+
+/*
+ * Send a command to the Target, acknowledging some GPIO interrupts.
+ */
+A_STATUS wmi_gpio_intr_ack(struct wmi_t *wmip, A_UINT32 ack_mask);
+
+#endif /* _GPIO_API_H_ */
diff --git a/drivers/ar6000/include/hif.h b/drivers/ar6000/include/hif.h
new file mode 100644
index 00000000000..846a69f3633
--- /dev/null
+++ b/drivers/ar6000/include/hif.h
@@ -0,0 +1,296 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ * HIF specific declarations and prototypes
+ */
+
+#ifndef _HIF_H_
+#define _HIF_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* Header files */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+
+typedef struct htc_callbacks HTC_CALLBACKS;
+typedef struct hif_device HIF_DEVICE;
+
+/*
+ * direction - Direction of transfer (HIF_READ/HIF_WRITE).
+ */
+#define HIF_READ                    0x00000001
+#define HIF_WRITE                   0x00000002
+#define HIF_DIR_MASK                (HIF_READ | HIF_WRITE)
+
+/*
+ *     type - An interface may support different kind of read/write commands.
+ *            The command type is divided into a basic and an extended command
+ *            and can be specified using HIF_BASIC_IO/HIF_EXTENDED_IO.
+ */
+#define HIF_BASIC_IO                0x00000004
+#define HIF_EXTENDED_IO             0x00000008
+#define HIF_TYPE_MASK               (HIF_BASIC_IO | HIF_EXTENDED_IO)
+
+/*
+ *     emode - This indicates the whether the command is to be executed in a
+ *             blocking or non-blocking fashion (HIF_SYNCHRONOUS/
+ *             HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
+ *             implemented using the asynchronous mode allowing the the bus
+ *             driver to indicate the completion of operation through the
+ *             registered callback routine. The requirement primarily comes
+ *             from the contexts these operations get called from (a driver's
+ *             transmit context or the ISR context in case of receive).
+ *             Support for both of these modes is essential.
+ */
+#define HIF_SYNCHRONOUS             0x00000010
+#define HIF_ASYNCHRONOUS            0x00000020
+#define HIF_EMODE_MASK              (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)
+
+/*
+ *     dmode - An interface may support different kinds of commands based on
+ *             the tradeoff between the amount of data it can carry and the
+ *             setup time. Byte and Block modes are supported (HIF_BYTE_BASIS/
+ *             HIF_BLOCK_BASIS). In case of latter, the data is rounded off
+ *             to the nearest block size by padding. The size of the block is
+ *             configurable at compile time using the HIF_BLOCK_SIZE and is
+ *             negotiated with the target during initialization after the
+ *             dragon interrupts are enabled.
+ */
+#define HIF_BYTE_BASIS              0x00000040
+#define HIF_BLOCK_BASIS             0x00000080
+#define HIF_DMODE_MASK              (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)
+
+/*
+ *     amode - This indicates if the address has to be incremented on dragon
+ *             after every read/write operation (HIF?FIXED_ADDRESS/
+ *             HIF_INCREMENTAL_ADDRESS).
+ */
+#define HIF_FIXED_ADDRESS           0x00000100
+#define HIF_INCREMENTAL_ADDRESS     0x00000200
+#define HIF_AMODE_MASK              (HIF_FIXED_ADDRESS | HIF_INCREMENTAL_ADDRESS)
+
+#define HIF_WR_ASYNC_BYTE_FIX   \
+    (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_WR_ASYNC_BYTE_INC   \
+    (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_WR_ASYNC_BLOCK_INC  \
+    (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_WR_SYNC_BYTE_FIX    \
+    (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_WR_SYNC_BYTE_INC    \
+    (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_WR_SYNC_BLOCK_INC  \
+    (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_RD_SYNC_BYTE_INC    \
+    (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_RD_SYNC_BYTE_FIX    \
+    (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_RD_ASYNC_BYTE_FIX   \
+    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_RD_ASYNC_BLOCK_FIX  \
+    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_RD_ASYNC_BYTE_INC   \
+    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_RD_ASYNC_BLOCK_INC  \
+    (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_RD_SYNC_BLOCK_INC  \
+    (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
+
+
+typedef enum {
+    HIF_DEVICE_POWER_STATE = 0,
+    HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
+    HIF_DEVICE_GET_MBOX_ADDR,
+    HIF_DEVICE_GET_PENDING_EVENTS_FUNC,
+    HIF_DEVICE_GET_IRQ_PROC_MODE,
+    HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC,
+} HIF_DEVICE_CONFIG_OPCODE;
+
+/*
+ * HIF CONFIGURE definitions:
+ *
+ *   HIF_DEVICE_GET_MBOX_BLOCK_SIZE
+ *   input : none
+ *   output : array of 4 A_UINT32s
+ *   notes: block size is returned for each mailbox (4)
+ *
+ *   HIF_DEVICE_GET_MBOX_ADDR
+ *   input : none
+ *   output : array of 4 A_UINT32
+ *   notes: address is returned for each mailbox (4) in the array
+ *
+ *   HIF_DEVICE_GET_PENDING_EVENTS_FUNC
+ *   input : none
+ *   output: HIF_PENDING_EVENTS_FUNC function pointer
+ *   notes: this is optional for the HIF layer, if the request is
+ *          not handled then it indicates that the upper layer can use
+ *          the standard device methods to get pending events (IRQs, mailbox messages etc..)
+ *          otherwise it can call the function pointer to check pending events.
+ *
+ *   HIF_DEVICE_GET_IRQ_PROC_MODE
+ *   input : none
+ *   output : HIF_DEVICE_IRQ_PROCESSING_MODE (interrupt processing mode)
+ *   note: the hif layer interfaces with the underlying OS-specific bus driver. The HIF
+ *         layer can report whether IRQ processing is requires synchronous behavior or
+ *         can be processed using asynchronous bus requests (typically faster).
+ *
+ *   HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC
+ *   input :
+ *   output : HIF_MASK_UNMASK_RECV_EVENT function pointer
+ *   notes: this is optional for the HIF layer.  The HIF layer may require a special mechanism
+ *          to mask receive message events.  The upper layer can call this pointer when it needs
+ *          to mask/unmask receive events (in case it runs out of buffers).
+ *
+ *
+ */
+
+typedef enum {
+    HIF_DEVICE_IRQ_SYNC_ONLY,   /* for HIF implementations that require the DSR to process all
+                                   interrupts before returning */
+    HIF_DEVICE_IRQ_ASYNC_SYNC,  /* for HIF implementations that allow DSR to process interrupts
+                                   using ASYNC I/O (that is HIFAckInterrupt can be called at a
+                                   later time */
+} HIF_DEVICE_IRQ_PROCESSING_MODE;
+
+#define HIF_MAX_DEVICES                 1
+
+struct htc_callbacks {
+    A_UCHAR *name;
+    A_UINT32 id;
+    A_STATUS (* deviceInsertedHandler)(void *hif_handle);
+    A_STATUS (* deviceRemovedHandler)(void *htc_handle, A_STATUS status);
+    A_STATUS (* deviceSuspendHandler)(void *htc_handle);
+    A_STATUS (* deviceResumeHandler)(void *htc_handle);
+    A_STATUS (* deviceWakeupHandler)(void *htc_handle);
+    A_STATUS (* rwCompletionHandler)(void *context, A_STATUS status);
+    A_STATUS (* dsrHandler)(void *htc_handle);
+};
+
+
+#define HIF_OTHER_EVENTS     (1 << 0)   /* other interrupts (non-Recv) are pending, host
+                                           needs to read the register table to figure out what */
+#define HIF_RECV_MSG_AVAIL   (1 << 1)   /* pending recv packet */
+
+typedef struct _HIF_PENDING_EVENTS_INFO {
+    A_UINT32 Events;
+    A_UINT32 LookAhead;
+} HIF_PENDING_EVENTS_INFO;
+
+    /* function to get pending events , some HIF modules use special mechanisms
+     * to detect packet available and other interrupts */
+typedef A_STATUS ( *HIF_PENDING_EVENTS_FUNC)(HIF_DEVICE              *device,
+                                             HIF_PENDING_EVENTS_INFO *pEvents,
+                                             void                    *AsyncContext);
+
+#define HIF_MASK_RECV    TRUE
+#define HIF_UNMASK_RECV  FALSE
+    /* function to mask recv events */
+typedef A_STATUS ( *HIF_MASK_UNMASK_RECV_EVENT)(HIF_DEVICE  *device,
+                                                A_BOOL      Mask,
+                                                void        *AsyncContext);
+
+
+/*
+ * This API is used by the HTC layer to initialize the HIF layer and to
+ * register different callback routines. Support for following events has
+ * been captured - DSR, Read/Write completion, Device insertion/removal,
+ * Device suspension/resumption/wakeup. In addition to this, the API is
+ * also used to register the name and the revision of the chip. The latter
+ * can be used to verify the revision of the chip read from the device
+ * before reporting it to HTC.
+ */
+int HIFInit(HTC_CALLBACKS *callbacks);
+
+/*
+ * This API is used to provide the read/write interface over the specific bus
+ * interface.
+ * address - Starting address in the dragon's address space. For mailbox
+ *           writes, it refers to the start of the mbox boundary. It should
+ *           be ensured that the last byte falls on the mailbox's EOM. For
+ *           mailbox reads, it refers to the end of the mbox boundary.
+ * buffer - Pointer to the buffer containg the data to be transmitted or
+ *          received.
+ * length - Amount of data to be transmitted or received.
+ * request - Characterizes the attributes of the command.
+ */
+A_STATUS
+HIFReadWrite(HIF_DEVICE    *device,
+             A_UINT32       address,
+             A_UCHAR       *buffer,
+             A_UINT32       length,
+             A_UINT32       request,
+             void          *context);
+
+/*
+ * This can be initiated from the unload driver context ie when the HTCShutdown
+ * routine is called.
+ */
+void HIFShutDownDevice(HIF_DEVICE *device);
+
+/*
+ * This should translate to an acknowledgment to the bus driver indicating that
+ * the previous interrupt request has been serviced and the all the relevant
+ * sources have been cleared. HTC is ready to process more interrupts.
+ * This should prevent the bus driver from raising an interrupt unless the
+ * previous one has been serviced and acknowledged using the previous API.
+ */
+void HIFAckInterrupt(HIF_DEVICE *device);
+
+void HIFMaskInterrupt(HIF_DEVICE *device);
+
+void HIFUnMaskInterrupt(HIF_DEVICE *device);
+
+/*
+ * This set of functions are to be used by the bus driver to notify
+ * the HIF module about various events.
+ * These are not implemented if the bus driver provides an alternative
+ * way for this notification though callbacks for instance.
+ */
+int HIFInsertEventNotify(void);
+
+int HIFRemoveEventNotify(void);
+
+int HIFIRQEventNotify(void);
+
+int HIFRWCompleteEventNotify(void);
+
+/*
+ * This function associates a opaque handle with the HIF layer
+ * to be used in communication with upper layer i.e. HTC.
+ * This would normaly be a pointer to htc_target data structure.
+ */
+void HIFSetHandle(void *hif_handle, void *handle);
+
+A_STATUS
+HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode,
+                   void *config, A_UINT32 configLen);
+
+
+struct device;
+struct device*
+HIFGetOSDevice(HIF_DEVICE *device);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HIF_H_ */
diff --git a/drivers/ar6000/include/host_version.h b/drivers/ar6000/include/host_version.h
new file mode 100644
index 00000000000..c090115bcca
--- /dev/null
+++ b/drivers/ar6000/include/host_version.h
@@ -0,0 +1,49 @@
+#ifndef _HOST_VERSION_H_
+#define _HOST_VERSION_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains version information for the sample host driver for the
+ * AR6000 chip
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/host_version.h#2 $
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <AR6K_version.h>
+
+/*
+ * The version number is made up of major, minor, patch and build
+ * numbers. These are 16 bit numbers.  The build and release script will
+ * set the build number using a Perforce counter.  Here the build number is
+ * set to 9999 so that builds done without the build-release script are easily
+ * identifiable.
+ */
+
+#define ATH_SW_VER_MAJOR      __VER_MAJOR_
+#define ATH_SW_VER_MINOR      __VER_MINOR_
+#define ATH_SW_VER_PATCH      __VER_PATCH_
+#define ATH_SW_VER_BUILD 9999
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HOST_VERSION_H_ */
diff --git a/drivers/ar6000/include/htc.h b/drivers/ar6000/include/htc.h
new file mode 100644
index 00000000000..152d867b71b
--- /dev/null
+++ b/drivers/ar6000/include/htc.h
@@ -0,0 +1,190 @@
+/*
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+
+#ifndef __HTC_H__
+#define __HTC_H__
+
+#ifndef ATH_TARGET
+#include "athstartpack.h"
+#endif
+
+#define A_OFFSETOF(type,field) (int)(&(((type *)NULL)->field))
+
+#define ASSEMBLE_UNALIGNED_UINT16(p,highbyte,lowbyte) \
+        (((A_UINT16)(((A_UINT8 *)(p))[(highbyte)])) << 8 | (A_UINT16)(((A_UINT8 *)(p))[(lowbyte)]))
+
+/* alignment independent macros (little-endian) to fetch UINT16s or UINT8s from a
+ * structure using only the type and field name.
+ * Use these macros if there is the potential for unaligned buffer accesses. */
+#define A_GET_UINT16_FIELD(p,type,field) \
+    ASSEMBLE_UNALIGNED_UINT16(p,\
+                              A_OFFSETOF(type,field) + 1, \
+                              A_OFFSETOF(type,field))
+
+#define A_SET_UINT16_FIELD(p,type,field,value) \
+{                                              \
+    ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] = (A_UINT8)(value);        \
+    ((A_UINT8 *)(p))[A_OFFSETOF(type,field) + 1] = (A_UINT8)((value) >> 8); \
+}
+
+#define A_GET_UINT8_FIELD(p,type,field) \
+            ((A_UINT8 *)(p))[A_OFFSETOF(type,field)]
+
+#define A_SET_UINT8_FIELD(p,type,field,value) \
+    ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] = (value)
+
+/****** DANGER DANGER ***************
+ *
+ *   The frame header length and message formats defined herein were
+ *   selected to accommodate optimal alignment for target processing.  This reduces code
+ *   size and improves performance.
+ *
+ *   Any changes to the header length may alter the alignment and cause exceptions
+ *   on the target. When adding to the message structures insure that fields are
+ *   properly aligned.
+ *
+ */
+
+/* HTC frame header */
+typedef PREPACK struct _HTC_FRAME_HDR{
+        /* do not remove or re-arrange these fields, these are minimally required
+         * to take advantage of 4-byte lookaheads in some hardware implementations */
+    A_UINT8   EndpointID;
+    A_UINT8   Flags;
+    A_UINT16  PayloadLen;       /* length of data (including trailer) that follows the header */
+
+    /***** end of 4-byte lookahead ****/
+
+    A_UINT8   ControlBytes[2];
+
+    /* message payload starts after the header */
+
+} POSTPACK HTC_FRAME_HDR;
+
+/* frame header flags */
+#define HTC_FLAGS_NEED_CREDIT_UPDATE (1 << 0)
+#define HTC_FLAGS_RECV_TRAILER       (1 << 1)
+
+
+#define HTC_HDR_LENGTH  (sizeof(HTC_FRAME_HDR))
+#define HTC_MAX_TRAILER_LENGTH   255
+#define HTC_MAX_PAYLOAD_LENGTH   (2048 - sizeof(HTC_FRAME_HDR))
+
+/* HTC control message IDs */
+typedef enum {
+    HTC_MSG_READY_ID = 1,
+    HTC_MSG_CONNECT_SERVICE_ID = 2,
+    HTC_MSG_CONNECT_SERVICE_RESPONSE_ID = 3,
+    HTC_MSG_SETUP_COMPLETE_ID = 4,
+} HTC_MSG_IDS;
+
+#define HTC_MAX_CONTROL_MESSAGE_LENGTH  256
+
+/* base message ID header */
+typedef PREPACK struct {
+    A_UINT16 MessageID;
+} POSTPACK HTC_UNKNOWN_MSG;
+
+/* HTC ready message
+ * direction : target-to-host  */
+typedef PREPACK struct {
+    A_UINT16  MessageID;    /* ID */
+    A_UINT16  CreditCount;  /* number of credits the target can offer */
+    A_UINT16  CreditSize;   /* size of each credit */
+    A_UINT8   MaxEndpoints; /* maximum number of endpoints the target has resources for */
+    A_UINT8   _Pad1;
+} POSTPACK HTC_READY_MSG;
+
+#define HTC_SERVICE_META_DATA_MAX_LENGTH 128
+
+/* connect service
+ * direction : host-to-target */
+typedef PREPACK struct {
+    A_UINT16  MessageID;
+    A_UINT16  ServiceID;           /* service ID of the service to connect to */
+    A_UINT16  ConnectionFlags;     /* connection flags */
+
+#define HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE (1 << 2)  /* reduce credit dribbling when
+                                                             the host needs credits */
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK             (0x3)
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_FOURTH        0x0
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF          0x1
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_THREE_FOURTHS     0x2
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_UNITY             0x3
+
+    A_UINT8   ServiceMetaLength;   /* length of meta data that follows */
+    A_UINT8   _Pad1;
+
+    /* service-specific meta data starts after the header */
+
+} POSTPACK HTC_CONNECT_SERVICE_MSG;
+
+/* connect response
+ * direction : target-to-host */
+typedef PREPACK struct {
+    A_UINT16  MessageID;
+    A_UINT16  ServiceID;            /* service ID that the connection request was made */
+    A_UINT8   Status;               /* service connection status */
+    A_UINT8   EndpointID;           /* assigned endpoint ID */
+    A_UINT16  MaxMsgSize;           /* maximum expected message size on this endpoint */
+    A_UINT8   ServiceMetaLength;    /* length of meta data that follows */
+    A_UINT8   _Pad1;
+
+    /* service-specific meta data starts after the header */
+
+} POSTPACK HTC_CONNECT_SERVICE_RESPONSE_MSG;
+
+typedef PREPACK struct {
+    A_UINT16  MessageID;
+    /* currently, no other fields */
+} POSTPACK HTC_SETUP_COMPLETE_MSG;
+
+
+/* connect response status codes */
+#define HTC_SERVICE_SUCCESS      0  /* success */
+#define HTC_SERVICE_NOT_FOUND    1  /* service could not be found */
+#define HTC_SERVICE_FAILED       2  /* specific service failed the connect */
+#define HTC_SERVICE_NO_RESOURCES 3  /* no resources (i.e. no more endpoints) */
+#define HTC_SERVICE_NO_MORE_EP   4  /* specific service is not allowing any more
+                                       endpoints */
+
+/* report record IDs */
+typedef enum {
+    HTC_RECORD_NULL  = 0,
+    HTC_RECORD_CREDITS   = 1,
+    HTC_RECORD_LOOKAHEAD = 2,
+} HTC_RPT_IDS;
+
+typedef PREPACK struct {
+    A_UINT8 RecordID;     /* Record ID */
+    A_UINT8 Length;       /* Length of record */
+} POSTPACK HTC_RECORD_HDR;
+
+typedef PREPACK struct {
+    A_UINT8 EndpointID;     /* Endpoint that owns these credits */
+    A_UINT8 Credits;        /* credits to report since last report */
+} POSTPACK HTC_CREDIT_REPORT;
+
+typedef PREPACK struct {
+    A_UINT8 PreValid;         /* pre valid guard */
+    A_UINT8 LookAhead[4];     /* 4 byte lookahead */
+    A_UINT8 PostValid;        /* post valid guard */
+
+   /* NOTE: the LookAhead array is guarded by a PreValid and Post Valid guard bytes.
+    * The PreValid bytes must equal the inverse of the PostValid byte */
+
+} POSTPACK HTC_LOOKAHEAD_REPORT;
+
+#ifndef ATH_TARGET
+#include "athendpack.h"
+#endif
+
+
+#endif /* __HTC_H__ */
+
diff --git a/drivers/ar6000/include/htc_api.h b/drivers/ar6000/include/htc_api.h
new file mode 100644
index 00000000000..e75692d7efa
--- /dev/null
+++ b/drivers/ar6000/include/htc_api.h
@@ -0,0 +1,439 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _HTC_API_H_
+#define _HTC_API_H_
+
+#include <htc.h>
+#include <htc_services.h>
+#include "htc_packet.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* TODO.. for BMI */
+#define ENDPOINT1 0
+// TODO -remove me, but we have to fix BMI first
+#define HTC_MAILBOX_NUM_MAX    4
+
+
+/* ------ Endpoint IDS ------ */
+typedef enum
+{
+    ENDPOINT_UNUSED = -1,
+    ENDPOINT_0 = 0,
+    ENDPOINT_1 = 1,
+    ENDPOINT_2 = 2,
+    ENDPOINT_3,
+    ENDPOINT_4,
+    ENDPOINT_5,
+    ENDPOINT_6,
+    ENDPOINT_7,
+    ENDPOINT_8,
+    ENDPOINT_MAX,
+} HTC_ENDPOINT_ID;
+
+/* this is the amount of header room required by users of HTC */
+#define HTC_HEADER_LEN         HTC_HDR_LENGTH
+
+typedef void *HTC_HANDLE;
+
+typedef A_UINT16 HTC_SERVICE_ID;
+
+typedef struct _HTC_INIT_INFO {
+    void   (*AddInstance)(HTC_HANDLE);
+    void   (*DeleteInstance)(void *Instance);
+    void   (*TargetFailure)(void *Instance, A_STATUS Status);
+} HTC_INIT_INFO;
+
+/* per service connection send completion */
+typedef void   (*HTC_EP_SEND_PKT_COMPLETE)(void *,HTC_PACKET *);
+/* per service connection pkt received */
+typedef void   (*HTC_EP_RECV_PKT)(void *,HTC_PACKET *);
+
+/* Optional per service connection receive buffer re-fill callback,
+ * On some OSes (like Linux) packets are allocated from a global pool and indicated up
+ * to the network stack.  The driver never gets the packets back from the OS.  For these OSes
+ * a refill callback can be used to allocate and re-queue buffers into HTC.
+ *
+ * On other OSes, the network stack can call into the driver's OS-specifc "return_packet" handler and
+ * the driver can re-queue these buffers into HTC. In this regard a refill callback is
+ * unnecessary */
+typedef void   (*HTC_EP_RECV_REFILL)(void *, HTC_ENDPOINT_ID Endpoint);
+
+/* Optional per service connection callback when a send queue is full. This can occur if the
+ * host continues queueing up TX packets faster than credits can arrive
+ * To prevent the host (on some Oses like Linux) from continuously queueing packets
+ * and consuming resources, this callback is provided so that that the host
+ * can disable TX in the subsystem (i.e. network stack)
+ * Other OSes require a "per-packet" indication_RAW_STREAM_NUM_MAX for each completed TX packet, this
+ * closed loop mechanism will prevent the network stack from overunning the NIC */
+typedef void (*HTC_EP_SEND_QUEUE_FULL)(void *, HTC_ENDPOINT_ID Endpoint);
+/* Optional per service connection callback when a send queue is available for receive new packet. */
+typedef void (*HTC_EP_SEND_QUEUE_AVAIL)(void *, HTC_ENDPOINT_ID Endpoint);
+
+typedef struct _HTC_EP_CALLBACKS {
+    void                     *pContext;     /* context for each callback */
+    HTC_EP_SEND_PKT_COMPLETE EpTxComplete;  /* tx completion callback for connected endpoint */
+    HTC_EP_RECV_PKT          EpRecv;        /* receive callback for connected endpoint */
+    HTC_EP_RECV_REFILL       EpRecvRefill;  /* OPTIONAL receive re-fill callback for connected endpoint */
+    HTC_EP_SEND_QUEUE_FULL   EpSendFull;    /* OPTIONAL send full callback */
+    HTC_EP_SEND_QUEUE_AVAIL  EpSendAvail;    /* OPTIONAL send available callback */
+} HTC_EP_CALLBACKS;
+
+/* service connection information */
+typedef struct _HTC_SERVICE_CONNECT_REQ {
+    HTC_SERVICE_ID   ServiceID;                 /* service ID to connect to */
+    A_UINT16         ConnectionFlags;           /* connection flags, see htc protocol definition */
+    A_UINT8         *pMetaData;                 /* ptr to optional service-specific meta-data */
+    A_UINT8          MetaDataLength;            /* optional meta data length */
+    HTC_EP_CALLBACKS EpCallbacks;               /* endpoint callbacks */
+    int              MaxSendQueueDepth;         /* maximum depth of any send queue */
+} HTC_SERVICE_CONNECT_REQ;
+
+/* service connection response information */
+typedef struct _HTC_SERVICE_CONNECT_RESP {
+    A_UINT8     *pMetaData;             /* caller supplied buffer to optional meta-data */
+    A_UINT8     BufferLength;           /* length of caller supplied buffer */
+    A_UINT8     ActualLength;           /* actual length of meta data */
+    HTC_ENDPOINT_ID Endpoint;           /* endpoint to communicate over */
+    int         MaxMsgLength;           /* max length of all messages over this endpoint */
+    A_UINT8     ConnectRespCode;        /* connect response code from target */
+} HTC_SERVICE_CONNECT_RESP;
+
+/* endpoint distribution structure */
+typedef struct _HTC_ENDPOINT_CREDIT_DIST {
+    struct _HTC_ENDPOINT_CREDIT_DIST *pNext;
+    struct _HTC_ENDPOINT_CREDIT_DIST *pPrev;
+    HTC_SERVICE_ID      ServiceID;          /* Service ID (set by HTC) */
+    HTC_ENDPOINT_ID     Endpoint;           /* endpoint for this distribution struct (set by HTC) */
+    A_UINT32            DistFlags;          /* distribution flags, distribution function can
+                                               set default activity using SET_EP_ACTIVE() macro */
+    int                 TxCreditsNorm;      /* credits for normal operation, anything above this
+                                               indicates the endpoint is over-subscribed, this field
+                                               is only relevant to the credit distribution function */
+    int                 TxCreditsMin;       /* floor for credit distribution, this field is
+                                               only relevant to the credit distribution function */
+    int                 TxCreditsAssigned;  /* number of credits assigned to this EP, this field
+                                               is only relevant to the credit dist function */
+    int                 TxCredits;          /* current credits available, this field is used by
+                                               HTC to determine whether a message can be sent or
+                                               must be queued */
+    int                 TxCreditsToDist;    /* pending credits to distribute on this endpoint, this
+                                               is set by HTC when credit reports arrive.
+                                               The credit distribution functions sets this to zero
+                                               when it distributes the credits */
+    int                 TxCreditsSeek;      /* this is the number of credits that the current pending TX
+                                               packet needs to transmit.  This is set by HTC when
+                                               and endpoint needs credits in order to transmit */
+    int                 TxCreditSize;       /* size in bytes of each credit (set by HTC) */
+    int                 TxCreditsPerMaxMsg; /* credits required for a maximum sized messages (set by HTC) */
+    void                *pHTCReserved;      /* reserved for HTC use */
+} HTC_ENDPOINT_CREDIT_DIST;
+
+#define HTC_EP_ACTIVE                            (1 << 31)
+
+/* macro to check if an endpoint has gone active, useful for credit
+ * distributions */
+#define IS_EP_ACTIVE(epDist)  ((epDist)->DistFlags & HTC_EP_ACTIVE)
+#define SET_EP_ACTIVE(epDist) (epDist)->DistFlags |= HTC_EP_ACTIVE
+
+    /* credit distibution code that is passed into the distrbution function,
+     * there are mandatory and optional codes that must be handled */
+typedef enum _HTC_CREDIT_DIST_REASON {
+    HTC_CREDIT_DIST_SEND_COMPLETE = 0,     /* credits available as a result of completed
+                                              send operations (MANDATORY) resulting in credit reports */
+    HTC_CREDIT_DIST_ACTIVITY_CHANGE = 1,   /* a change in endpoint activity occured (OPTIONAL) */
+    HTC_CREDIT_DIST_SEEK_CREDITS,          /* an endpoint needs to "seek" credits (OPTIONAL) */
+    HTC_DUMP_CREDIT_STATE                  /* for debugging, dump any state information that is kept by
+                                              the distribution function */
+} HTC_CREDIT_DIST_REASON;
+
+typedef void (*HTC_CREDIT_DIST_CALLBACK)(void                     *Context,
+                                         HTC_ENDPOINT_CREDIT_DIST *pEPList,
+                                         HTC_CREDIT_DIST_REASON   Reason);
+
+typedef void (*HTC_CREDIT_INIT_CALLBACK)(void *Context,
+                                         HTC_ENDPOINT_CREDIT_DIST *pEPList,
+                                         int                      TotalCredits);
+
+    /* endpoint statistics action */
+typedef enum _HTC_ENDPOINT_STAT_ACTION {
+    HTC_EP_STAT_SAMPLE = 0,                /* only read statistics */
+    HTC_EP_STAT_SAMPLE_AND_CLEAR = 1,      /* sample and immediately clear statistics */
+    HTC_EP_STAT_CLEAR                      /* clear only */
+} HTC_ENDPOINT_STAT_ACTION;
+
+    /* endpoint statistics */
+typedef struct _HTC_ENDPOINT_STATS {
+    A_UINT32  TxCreditLowIndications;  /* number of times the host set the credit-low flag in a send message on
+                                        this endpoint */
+    A_UINT32  TxIssued;               /* running count of TX packets issued */
+    A_UINT32  TxCreditRpts;           /* running count of total credit reports received for this endpoint */
+    A_UINT32  TxCreditRptsFromRx;
+    A_UINT32  TxCreditRptsFromOther;
+    A_UINT32  TxCreditRptsFromEp0;
+    A_UINT32  TxCreditsFromRx;        /* count of credits received via Rx packets on this endpoint */
+    A_UINT32  TxCreditsFromOther;     /* count of credits received via another endpoint */
+    A_UINT32  TxCreditsFromEp0;       /* count of credits received via another endpoint */
+    A_UINT32  TxCreditsConsummed;     /* count of consummed credits */
+    A_UINT32  TxCreditsReturned;      /* count of credits returned */
+    A_UINT32  RxReceived;             /* count of RX packets received */
+    A_UINT32  RxLookAheads;           /* count of lookahead records
+                                         found in messages received on this endpoint */
+} HTC_ENDPOINT_STATS;
+
+/* ------ Function Prototypes ------ */
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Initialize HTC
+  @function name: HTCInit
+  @input:  pInfo - initialization information
+  @output:
+  @return: A_OK on success
+  @notes: The caller initializes global HTC state and registers various instance
+          notification callbacks (see HTC_INIT_INFO).
+
+  @example:
+  @see also: HTCShutdown
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HTCInit(HTC_INIT_INFO *pInfo);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Get the underlying HIF device handle
+  @function name: HTCGetHifDevice
+  @input:  HTCHandle - handle passed into the AddInstance callback
+  @output:
+  @return: opaque HIF device handle usable in HIF API calls.
+  @notes:
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void       *HTCGetHifDevice(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Set the associated instance for the HTC handle
+  @function name: HTCSetInstance
+  @input:  HTCHandle - handle passed into the AddInstance callback
+           Instance - caller supplied instance object
+  @output:
+  @return:
+  @notes:  Caller must set the instance information for the HTC handle in order to receive
+           notifications for instance deletion (DeleteInstance callback is called) and for target
+           failure notification.
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HTCSetInstance(HTC_HANDLE HTCHandle, void *Instance);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Set credit distribution parameters
+  @function name: HTCSetCreditDistribution
+  @input:  HTCHandle - HTC handle
+           pCreditDistCont - caller supplied context to pass into distribution functions
+           CreditDistFunc - Distribution function callback
+           CreditDistInit - Credit Distribution initialization callback
+           ServicePriorityOrder - Array containing list of service IDs, lowest index is highest
+                                  priority
+           ListLength - number of elements in ServicePriorityOrder
+  @output:
+  @return:
+  @notes:  The user can set a custom credit distribution function to handle special requirements
+           for each endpoint.  A default credit distribution routine can be used by setting
+           CreditInitFunc to NULL.  The default credit distribution is only provided for simple
+           "fair" credit distribution without regard to any prioritization.
+
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HTCSetCreditDistribution(HTC_HANDLE               HTCHandle,
+                                     void                     *pCreditDistContext,
+                                     HTC_CREDIT_DIST_CALLBACK CreditDistFunc,
+                                     HTC_CREDIT_INIT_CALLBACK CreditInitFunc,
+                                     HTC_SERVICE_ID           ServicePriorityOrder[],
+                                     int                      ListLength);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Wait for the target to indicate the HTC layer is ready
+  @function name: HTCWaitTarget
+  @input:  HTCHandle - HTC handle
+  @output:
+  @return:
+  @notes:  This API blocks until the target responds with an HTC ready message.
+           The caller should not connect services until the target has indicated it is
+           ready.
+  @example:
+  @see also: HTCConnectService
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HTCWaitTarget(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Start target service communications
+  @function name: HTCStart
+  @input:  HTCHandle - HTC handle
+  @output:
+  @return:
+  @notes: This API indicates to the target that the service connection phase is complete
+          and the target can freely start all connected services.  This API should only be
+          called AFTER all service connections have been made.  TCStart will issue a
+          SETUP_COMPLETE message to the target to indicate that all service connections
+          have been made and the target can start communicating over the endpoints.
+  @example:
+  @see also: HTCConnectService
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HTCStart(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Add receive packet to HTC
+  @function name: HTCAddReceivePkt
+  @input:  HTCHandle - HTC handle
+           pPacket - HTC receive packet to add
+  @output:
+  @return: A_OK on success
+  @notes:  user must supply HTC packets for capturing incomming HTC frames.  The caller
+           must initialize each HTC packet using the SET_HTC_PACKET_INFO_RX_REFILL()
+           macro.
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HTCAddReceivePkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Connect to an HTC service
+  @function name: HTCConnectService
+  @input:  HTCHandle - HTC handle
+           pReq - connection details
+  @output: pResp - connection response
+  @return:
+  @notes:  Service connections must be performed before HTCStart.  User provides callback handlers
+           for various endpoint events.
+  @example:
+  @see also: HTCStart
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HTCConnectService(HTC_HANDLE HTCHandle,
+                              HTC_SERVICE_CONNECT_REQ  *pReq,
+                              HTC_SERVICE_CONNECT_RESP *pResp);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Send an HTC packet
+  @function name: HTCSendPkt
+  @input:  HTCHandle - HTC handle
+           pPacket - packet to send
+  @output:
+  @return: A_OK
+  @notes:  Caller must initialize packet using SET_HTC_PACKET_INFO_TX() macro.
+           This interface is fully asynchronous.  On error, HTC SendPkt will
+           call the registered Endpoint callback to cleanup the packet.
+  @example:
+  @see also: HTCFlushEndpoint
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS    HTCSendPkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Stop HTC service communications
+  @function name: HTCStop
+  @input:  HTCHandle - HTC handle
+  @output:
+  @return:
+  @notes: HTC communications is halted.  All receive and pending TX packets will
+          be flushed.
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HTCStop(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Shutdown HTC
+  @function name: HTCShutdown
+  @input:
+  @output:
+  @return:
+  @notes:  This cleans up all resources allocated by HTCInit().
+  @example:
+  @see also: HTCInit
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HTCShutDown(void);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Flush pending TX packets
+  @function name: HTCFlushEndpoint
+  @input:  HTCHandle - HTC handle
+           Endpoint - Endpoint to flush
+           Tag - flush tag
+  @output:
+  @return:
+  @notes:  The Tag parameter is used to selectively flush packets with matching tags.
+           The value of 0 forces all packets to be flush regardless of tag.
+  @example:
+  @see also: HTCSendPkt
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HTCFlushEndpoint(HTC_HANDLE HTCHandle, HTC_ENDPOINT_ID Endpoint, HTC_TX_TAG Tag);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Dump credit distribution state
+  @function name: HTCDumpCreditStates
+  @input:  HTCHandle - HTC handle
+  @output:
+  @return:
+  @notes:  This dumps all credit distribution information to the debugger
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HTCDumpCreditStates(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Indicate a traffic activity change on an endpoint
+  @function name: HTCIndicateActivityChange
+  @input:  HTCHandle - HTC handle
+           Endpoint - endpoint in which activity has changed
+           Active - TRUE if active, FALSE if it has become inactive
+  @output:
+  @return:
+  @notes:  This triggers the registered credit distribution function to
+           re-adjust credits for active/inactive endpoints.
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void        HTCIndicateActivityChange(HTC_HANDLE      HTCHandle,
+                                      HTC_ENDPOINT_ID Endpoint,
+                                      A_BOOL          Active);
+
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+  @desc: Get endpoint statistics
+  @function name: HTCGetEndpointStatistics
+  @input:  HTCHandle - HTC handle
+           Endpoint - Endpoint identifier
+           Action - action to take with statistics
+  @output:
+           pStats - statistics that were sampled (can be NULL if Action is HTC_EP_STAT_CLEAR)
+
+  @return: TRUE if statistics profiling is enabled, otherwise FALSE.
+
+  @notes:  Statistics is a compile-time option and this function may return FALSE
+           if HTC is not compiled with profiling.
+
+           The caller can specify the statistic "action" to take when sampling
+           the statistics.  This includes:
+
+           HTC_EP_STAT_SAMPLE: The pStats structure is filled with the current values.
+           HTC_EP_STAT_SAMPLE_AND_CLEAR: The structure is filled and the current statistics
+                             are cleared.
+           HTC_EP_STAT_CLEA : the statistics are cleared, the called can pass a NULL value for
+                   pStats
+
+  @example:
+  @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_BOOL       HTCGetEndpointStatistics(HTC_HANDLE               HTCHandle,
+                                      HTC_ENDPOINT_ID          Endpoint,
+                                      HTC_ENDPOINT_STAT_ACTION Action,
+                                      HTC_ENDPOINT_STATS       *pStats);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HTC_API_H_ */
diff --git a/drivers/ar6000/include/htc_packet.h b/drivers/ar6000/include/htc_packet.h
new file mode 100644
index 00000000000..9ce871817e5
--- /dev/null
+++ b/drivers/ar6000/include/htc_packet.h
@@ -0,0 +1,138 @@
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef HTC_PACKET_H_
+#define HTC_PACKET_H_
+
+
+#include "dl_list.h"
+
+struct _HTC_PACKET;
+
+typedef void (* HTC_PACKET_COMPLETION)(void *,struct _HTC_PACKET *);
+
+typedef A_UINT16 HTC_TX_TAG;
+
+typedef struct _HTC_TX_PACKET_INFO {
+    HTC_TX_TAG    Tag;            /* tag used to selective flush packets */
+} HTC_TX_PACKET_INFO;
+
+#define HTC_TX_PACKET_TAG_ALL          0    /* a tag of zero is reserved and used to flush ALL packets */
+#define HTC_TX_PACKET_TAG_INTERNAL     1                                /* internal tags start here */
+#define HTC_TX_PACKET_TAG_USER_DEFINED (HTC_TX_PACKET_TAG_INTERNAL + 9) /* user-defined tags start here */
+
+typedef struct _HTC_RX_PACKET_INFO {
+    A_UINT32    Unused;          /* for future use and to make compilers happy */
+} HTC_RX_PACKET_INFO;
+
+/* wrapper around endpoint-specific packets */
+typedef struct _HTC_PACKET {
+    DL_LIST         ListLink;       /* double link */
+    void            *pPktContext;   /* caller's per packet specific context */
+
+    A_UINT8         *pBufferStart;  /* the true buffer start , the caller can
+                                       store the real buffer start here.  In
+                                       receive callbacks, the HTC layer sets pBuffer
+                                       to the start of the payload past the header. This
+                                       field allows the caller to reset pBuffer when it
+                                       recycles receive packets back to HTC */
+    /*
+     * Pointer to the start of the buffer. In the transmit
+     * direction this points to the start of the payload. In the
+     * receive direction, however, the buffer when queued up
+     * points to the start of the HTC header but when returned
+     * to the caller points to the start of the payload
+     */
+    A_UINT8         *pBuffer;       /* payload start (RX/TX) */
+    A_UINT32        BufferLength;   /* length of buffer */
+    A_UINT32        ActualLength;   /* actual length of payload */
+    int             Endpoint;       /* endpoint that this packet was sent/recv'd from */
+    A_STATUS        Status;         /* completion status */
+    union {
+        HTC_TX_PACKET_INFO  AsTx;   /* Tx Packet specific info */
+        HTC_RX_PACKET_INFO  AsRx;   /* Rx Packet specific info */
+    } PktInfo;
+
+    /* the following fields are for internal HTC use */
+    HTC_PACKET_COMPLETION Completion;   /* completion */
+    void                  *pContext;    /* HTC private completion context */
+    A_UINT32              HTCReserved;  /* reserved */
+} HTC_PACKET;
+
+
+
+#define COMPLETE_HTC_PACKET(p,status)        \
+{                                            \
+    (p)->Status = (status);                  \
+    (p)->Completion((p)->pContext,(p));      \
+}
+
+#define INIT_HTC_PACKET_INFO(p,b,len)             \
+{                                                 \
+    (p)->pBufferStart = (b);                      \
+    (p)->BufferLength = (len);                    \
+}
+
+/* macro to set an initial RX packet for refilling HTC */
+#define SET_HTC_PACKET_INFO_RX_REFILL(p,c,b,len,ep) \
+{                                                 \
+    (p)->pPktContext = (c);                       \
+    (p)->pBuffer = (b);                           \
+    (p)->pBufferStart = (b);                      \
+    (p)->BufferLength = (len);                    \
+    (p)->Endpoint = (ep);                         \
+}
+
+/* fast macro to recycle an RX packet that will be re-queued to HTC */
+#define HTC_PACKET_RESET_RX(p)              \
+    (p)->pBuffer = (p)->pBufferStart
+
+/* macro to set packet parameters for TX */
+#define SET_HTC_PACKET_INFO_TX(p,c,b,len,ep,tag)  \
+{                                                 \
+    (p)->pPktContext = (c);                       \
+    (p)->pBuffer = (b);                           \
+    (p)->ActualLength = (len);                    \
+    (p)->Endpoint = (ep);                         \
+    (p)->PktInfo.AsTx.Tag = (tag);                \
+}
+
+/* HTC Packet Queueing Macros */
+typedef DL_LIST HTC_PACKET_QUEUE;
+/* initialize queue */
+#define INIT_HTC_PACKET_QUEUE(pQ) DL_LIST_INIT((pQ))
+/* enqueue HTC packet to the tail of the queue */
+#define HTC_PACKET_ENQUEUE(pQ,p)  DL_ListInsertTail((pQ),&(p)->ListLink)
+/* test if a queue is empty */
+#define HTC_QUEUE_EMPTY(pQ)       DL_LIST_IS_EMPTY((pQ))
+/* get packet at head without removing it */
+#define HTC_GET_PKT_AT_HEAD(pQ)   A_CONTAINING_STRUCT((DL_LIST_GET_ITEM_AT_HEAD(pQ)),HTC_PACKET,ListLink);
+/* remove a packet from the current list it is linked to */
+#define HTC_PACKET_REMOVE(p)      DL_ListRemove(&(p)->ListLink)
+
+/* dequeue an HTC packet from the head of the queue */
+static INLINE HTC_PACKET *HTC_PACKET_DEQUEUE(HTC_PACKET_QUEUE *queue) {
+    DL_LIST    *pItem = DL_ListRemoveItemFromHead(queue);
+    if (pItem != NULL) {
+        return A_CONTAINING_STRUCT(pItem, HTC_PACKET, ListLink);
+    }
+    return NULL;
+}
+
+#endif /*HTC_PACKET_H_*/
diff --git a/drivers/ar6000/include/htc_services.h b/drivers/ar6000/include/htc_services.h
new file mode 100644
index 00000000000..fc6fc296625
--- /dev/null
+++ b/drivers/ar6000/include/htc_services.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __HTC_SERVICES_H__
+#define __HTC_SERVICES_H__
+
+/* Current service IDs */
+
+typedef enum {
+    RSVD_SERVICE_GROUP  = 0,
+    WMI_SERVICE_GROUP   = 1,
+
+    HTC_TEST_GROUP = 254,
+    HTC_SERVICE_GROUP_LAST = 255
+}HTC_SERVICE_GROUP_IDS;
+
+#define MAKE_SERVICE_ID(group,index) \
+            (int)(((int)group << 8) | (int)(index))
+
+/* NOTE: service ID of 0x0000 is reserved and should never be used */
+#define HTC_CTRL_RSVD_SVC MAKE_SERVICE_ID(RSVD_SERVICE_GROUP,1)
+#define WMI_CONTROL_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,0)
+#define WMI_DATA_BE_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,1)
+#define WMI_DATA_BK_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,2)
+#define WMI_DATA_VI_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,3)
+#define WMI_DATA_VO_SVC   MAKE_SERVICE_ID(WMI_SERVICE_GROUP,4)
+#define WMI_MAX_SERVICES  5
+
+/* raw stream service (i.e. flash, tcmd, calibration apps) */
+#define HTC_RAW_STREAMS_SVC MAKE_SERVICE_ID(HTC_TEST_GROUP,0)
+
+#endif /*HTC_SERVICES_H_*/
diff --git a/drivers/ar6000/include/ieee80211.h b/drivers/ar6000/include/ieee80211.h
new file mode 100644
index 00000000000..7090040249e
--- /dev/null
+++ b/drivers/ar6000/include/ieee80211.h
@@ -0,0 +1,342 @@
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
+ * Copyright (c) 2006 Atheros Communications, Inc.
+ *
+ * Wireless Network driver for Atheros AR6001
+ * All rights reserved.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef _NET80211_IEEE80211_H_
+#define _NET80211_IEEE80211_H_
+
+#include "athstartpack.h"
+
+/*
+ * 802.11 protocol definitions.
+ */
+
+#define IEEE80211_ADDR_LEN  6       /* size of 802.11 address */
+/* is 802.11 address multicast/broadcast? */
+#define IEEE80211_IS_MULTICAST(_a)  (*(_a) & 0x01)
+#define IEEE80211_ADDR_EQ(addr1, addr2)     \
+    (A_MEMCMP(addr1, addr2, IEEE80211_ADDR_LEN) == 0)
+
+#define IEEE80211_KEYBUF_SIZE 16
+#define IEEE80211_MICBUF_SIZE (8+8)  /* space for both tx and rx */
+
+/*
+ * NB: these values are ordered carefully; there are lots of
+ * of implications in any reordering.  In particular beware
+ * that 4 is not used to avoid conflicting with IEEE80211_F_PRIVACY.
+ */
+#define IEEE80211_CIPHER_WEP            0
+#define IEEE80211_CIPHER_TKIP           1
+#define IEEE80211_CIPHER_AES_OCB        2
+#define IEEE80211_CIPHER_AES_CCM        3
+#define IEEE80211_CIPHER_CKIP           5
+#define IEEE80211_CIPHER_CCKM_KRK       6
+#define IEEE80211_CIPHER_NONE           7       /* pseudo value */
+
+#define IEEE80211_CIPHER_MAX            (IEEE80211_CIPHER_NONE+1)
+
+#define IEEE80211_IS_VALID_WEP_CIPHER_LEN(len) \
+        (((len) == 5) || ((len) == 13) || ((len) == 16))
+
+
+
+/*
+ * generic definitions for IEEE 802.11 frames
+ */
+PREPACK struct ieee80211_frame {
+    A_UINT8    i_fc[2];
+    A_UINT8    i_dur[2];
+    A_UINT8    i_addr1[IEEE80211_ADDR_LEN];
+    A_UINT8    i_addr2[IEEE80211_ADDR_LEN];
+    A_UINT8    i_addr3[IEEE80211_ADDR_LEN];
+    A_UINT8    i_seq[2];
+    /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */
+    /* see below */
+} POSTPACK;
+
+#define IEEE80211_FC0_VERSION_MASK          0x03
+#define IEEE80211_FC0_VERSION_SHIFT         0
+#define IEEE80211_FC0_VERSION_0             0x00
+#define IEEE80211_FC0_TYPE_MASK             0x0c
+#define IEEE80211_FC0_TYPE_SHIFT            2
+#define IEEE80211_FC0_TYPE_MGT              0x00
+#define IEEE80211_FC0_TYPE_CTL              0x04
+#define IEEE80211_FC0_TYPE_DATA             0x08
+
+#define IEEE80211_FC0_SUBTYPE_MASK          0xf0
+#define IEEE80211_FC0_SUBTYPE_SHIFT         4
+/* for TYPE_MGT */
+#define IEEE80211_FC0_SUBTYPE_ASSOC_REQ     0x00
+#define IEEE80211_FC0_SUBTYPE_ASSOC_RESP    0x10
+#define IEEE80211_FC0_SUBTYPE_REASSOC_REQ   0x20
+#define IEEE80211_FC0_SUBTYPE_REASSOC_RESP  0x30
+#define IEEE80211_FC0_SUBTYPE_PROBE_REQ     0x40
+#define IEEE80211_FC0_SUBTYPE_PROBE_RESP    0x50
+#define IEEE80211_FC0_SUBTYPE_BEACON        0x80
+#define IEEE80211_FC0_SUBTYPE_ATIM          0x90
+#define IEEE80211_FC0_SUBTYPE_DISASSOC      0xa0
+#define IEEE80211_FC0_SUBTYPE_AUTH          0xb0
+#define IEEE80211_FC0_SUBTYPE_DEAUTH        0xc0
+/* for TYPE_CTL */
+#define IEEE80211_FC0_SUBTYPE_PS_POLL       0xa0
+#define IEEE80211_FC0_SUBTYPE_RTS           0xb0
+#define IEEE80211_FC0_SUBTYPE_CTS           0xc0
+#define IEEE80211_FC0_SUBTYPE_ACK           0xd0
+#define IEEE80211_FC0_SUBTYPE_CF_END        0xe0
+#define IEEE80211_FC0_SUBTYPE_CF_END_ACK    0xf0
+/* for TYPE_DATA (bit combination) */
+#define IEEE80211_FC0_SUBTYPE_DATA          0x00
+#define IEEE80211_FC0_SUBTYPE_CF_ACK        0x10
+#define IEEE80211_FC0_SUBTYPE_CF_POLL       0x20
+#define IEEE80211_FC0_SUBTYPE_CF_ACPL       0x30
+#define IEEE80211_FC0_SUBTYPE_NODATA        0x40
+#define IEEE80211_FC0_SUBTYPE_CFACK         0x50
+#define IEEE80211_FC0_SUBTYPE_CFPOLL        0x60
+#define IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK 0x70
+#define IEEE80211_FC0_SUBTYPE_QOS           0x80
+#define IEEE80211_FC0_SUBTYPE_QOS_NULL      0xc0
+
+#define IEEE80211_FC1_DIR_MASK              0x03
+#define IEEE80211_FC1_DIR_NODS              0x00    /* STA->STA */
+#define IEEE80211_FC1_DIR_TODS              0x01    /* STA->AP  */
+#define IEEE80211_FC1_DIR_FROMDS            0x02    /* AP ->STA */
+#define IEEE80211_FC1_DIR_DSTODS            0x03    /* AP ->AP  */
+
+#define IEEE80211_FC1_MORE_FRAG             0x04
+#define IEEE80211_FC1_RETRY                 0x08
+#define IEEE80211_FC1_PWR_MGT               0x10
+#define IEEE80211_FC1_MORE_DATA             0x20
+#define IEEE80211_FC1_WEP                   0x40
+#define IEEE80211_FC1_ORDER                 0x80
+
+#define IEEE80211_SEQ_FRAG_MASK             0x000f
+#define IEEE80211_SEQ_FRAG_SHIFT            0
+#define IEEE80211_SEQ_SEQ_MASK              0xfff0
+#define IEEE80211_SEQ_SEQ_SHIFT             4
+
+#define IEEE80211_NWID_LEN                  32
+
+/*
+ * 802.11 rate set.
+ */
+#define IEEE80211_RATE_SIZE     8       /* 802.11 standard */
+#define IEEE80211_RATE_MAXSIZE  15      /* max rates we'll handle */
+
+#define WMM_NUM_AC                  4   /* 4 AC categories */
+
+#define WMM_PARAM_ACI_M         0x60    /* Mask for ACI field */
+#define WMM_PARAM_ACI_S         5   /* Shift for ACI field */
+#define WMM_PARAM_ACM_M         0x10    /* Mask for ACM bit */
+#define WMM_PARAM_ACM_S         4       /* Shift for ACM bit */
+#define WMM_PARAM_AIFSN_M       0x0f    /* Mask for aifsn field */
+#define WMM_PARAM_LOGCWMIN_M    0x0f    /* Mask for CwMin field (in log) */
+#define WMM_PARAM_LOGCWMAX_M    0xf0    /* Mask for CwMax field (in log) */
+#define WMM_PARAM_LOGCWMAX_S    4   /* Shift for CwMax field */
+
+#define WMM_AC_TO_TID(_ac) (       \
+    ((_ac) == WMM_AC_VO) ? 6 : \
+    ((_ac) == WMM_AC_VI) ? 5 : \
+    ((_ac) == WMM_AC_BK) ? 1 : \
+    0)
+
+#define TID_TO_WMM_AC(_tid) (      \
+    ((_tid) < 1) ? WMM_AC_BE : \
+    ((_tid) < 3) ? WMM_AC_BK : \
+    ((_tid) < 6) ? WMM_AC_VI : \
+    WMM_AC_VO)
+/*
+ * Management information element payloads.
+ */
+
+enum {
+    IEEE80211_ELEMID_SSID       = 0,
+    IEEE80211_ELEMID_RATES      = 1,
+    IEEE80211_ELEMID_FHPARMS    = 2,
+    IEEE80211_ELEMID_DSPARMS    = 3,
+    IEEE80211_ELEMID_CFPARMS    = 4,
+    IEEE80211_ELEMID_TIM        = 5,
+    IEEE80211_ELEMID_IBSSPARMS  = 6,
+    IEEE80211_ELEMID_COUNTRY    = 7,
+    IEEE80211_ELEMID_CHALLENGE  = 16,
+    /* 17-31 reserved for challenge text extension */
+    IEEE80211_ELEMID_PWRCNSTR   = 32,
+    IEEE80211_ELEMID_PWRCAP     = 33,
+    IEEE80211_ELEMID_TPCREQ     = 34,
+    IEEE80211_ELEMID_TPCREP     = 35,
+    IEEE80211_ELEMID_SUPPCHAN   = 36,
+    IEEE80211_ELEMID_CHANSWITCH = 37,
+    IEEE80211_ELEMID_MEASREQ    = 38,
+    IEEE80211_ELEMID_MEASREP    = 39,
+    IEEE80211_ELEMID_QUIET      = 40,
+    IEEE80211_ELEMID_IBSSDFS    = 41,
+    IEEE80211_ELEMID_ERP        = 42,
+    IEEE80211_ELEMID_RSN        = 48,
+    IEEE80211_ELEMID_XRATES     = 50,
+    IEEE80211_ELEMID_TPC        = 150,
+    IEEE80211_ELEMID_CCKM       = 156,
+    IEEE80211_ELEMID_VENDOR     = 221,  /* vendor private */
+};
+
+#define ATH_OUI             0x7f0300        /* Atheros OUI */
+#define ATH_OUI_TYPE        0x01
+#define ATH_OUI_SUBTYPE     0x01
+#define ATH_OUI_VERSION     0x00
+
+#define WPA_OUI             0xf25000
+#define WPA_OUI_TYPE        0x01
+#define WPA_VERSION         1          /* current supported version */
+
+#define WPA_CSE_NULL        0x00
+#define WPA_CSE_WEP40       0x01
+#define WPA_CSE_TKIP        0x02
+#define WPA_CSE_CCMP        0x04
+#define WPA_CSE_WEP104      0x05
+
+#define WPA_ASE_NONE        0x00
+#define WPA_ASE_8021X_UNSPEC    0x01
+#define WPA_ASE_8021X_PSK   0x02
+
+#define RSN_OUI         0xac0f00
+#define RSN_VERSION     1       /* current supported version */
+
+#define RSN_CSE_NULL        0x00
+#define RSN_CSE_WEP40       0x01
+#define RSN_CSE_TKIP        0x02
+#define RSN_CSE_WRAP        0x03
+#define RSN_CSE_CCMP        0x04
+#define RSN_CSE_WEP104      0x05
+
+#define RSN_ASE_NONE        0x00
+#define RSN_ASE_8021X_UNSPEC    0x01
+#define RSN_ASE_8021X_PSK   0x02
+
+#define RSN_CAP_PREAUTH     0x01
+
+#define WMM_OUI         0xf25000
+#define WMM_OUI_TYPE        0x02
+#define WMM_INFO_OUI_SUBTYPE    0x00
+#define WMM_PARAM_OUI_SUBTYPE   0x01
+#define WMM_VERSION     1
+
+/* WMM stream classes */
+#define WMM_NUM_AC  4
+#define WMM_AC_BE   0       /* best effort */
+#define WMM_AC_BK   1       /* background */
+#define WMM_AC_VI   2       /* video */
+#define WMM_AC_VO   3       /* voice */
+
+/* TSPEC related */
+#define ACTION_CATEGORY_CODE_TSPEC                 17
+#define ACTION_CODE_TSPEC_ADDTS                    0
+#define ACTION_CODE_TSPEC_ADDTS_RESP               1
+#define ACTION_CODE_TSPEC_DELTS                    2
+
+typedef enum {
+    TSPEC_STATUS_CODE_ADMISSION_ACCEPTED = 0,
+    TSPEC_STATUS_CODE_ADDTS_INVALID_PARAMS = 0x1,
+    TSPEC_STATUS_CODE_ADDTS_REQUEST_REFUSED = 0x3,
+    TSPEC_STATUS_CODE_UNSPECIFIED_QOS_RELATED_FAILURE = 0xC8,
+    TSPEC_STATUS_CODE_REQUESTED_REFUSED_POLICY_CONFIGURATION = 0xC9,
+    TSPEC_STATUS_CODE_INSUFFCIENT_BANDWIDTH = 0xCA,
+    TSPEC_STATUS_CODE_INVALID_PARAMS = 0xCB,
+    TSPEC_STATUS_CODE_DELTS_SENT    = 0x30,
+    TSPEC_STATUS_CODE_DELTS_RECV    = 0x31,
+} TSPEC_STATUS_CODE;
+
+/*
+ * WMM/802.11e Tspec Element
+ */
+typedef PREPACK struct wmm_tspec_ie_t {
+    A_UINT8     elementId;
+    A_UINT8     len;
+    A_UINT8     oui[3];
+    A_UINT8     ouiType;
+    A_UINT8     ouiSubType;
+    A_UINT8     version;
+    A_UINT16    tsInfo_info;
+    A_UINT8     tsInfo_reserved;
+    A_UINT16    nominalMSDU;
+    A_UINT16    maxMSDU;
+    A_UINT32    minServiceInt;
+    A_UINT32    maxServiceInt;
+    A_UINT32    inactivityInt;
+    A_UINT32    suspensionInt;
+    A_UINT32    serviceStartTime;
+    A_UINT32    minDataRate;
+    A_UINT32    meanDataRate;
+    A_UINT32    peakDataRate;
+    A_UINT32    maxBurstSize;
+    A_UINT32    delayBound;
+    A_UINT32    minPhyRate;
+    A_UINT16    sba;
+    A_UINT16    mediumTime;
+} POSTPACK WMM_TSPEC_IE;
+
+
+/*
+ * BEACON management packets
+ *
+ *  octet timestamp[8]
+ *  octet beacon interval[2]
+ *  octet capability information[2]
+ *  information element
+ *      octet elemid
+ *      octet length
+ *      octet information[length]
+ */
+
+#define IEEE80211_BEACON_INTERVAL(beacon) \
+    ((beacon)[8] | ((beacon)[9] << 8))
+#define IEEE80211_BEACON_CAPABILITY(beacon) \
+    ((beacon)[10] | ((beacon)[11] << 8))
+
+#define IEEE80211_CAPINFO_ESS               0x0001
+#define IEEE80211_CAPINFO_IBSS              0x0002
+#define IEEE80211_CAPINFO_CF_POLLABLE       0x0004
+#define IEEE80211_CAPINFO_CF_POLLREQ        0x0008
+#define IEEE80211_CAPINFO_PRIVACY           0x0010
+#define IEEE80211_CAPINFO_SHORT_PREAMBLE    0x0020
+#define IEEE80211_CAPINFO_PBCC              0x0040
+#define IEEE80211_CAPINFO_CHNL_AGILITY      0x0080
+/* bits 8-9 are reserved */
+#define IEEE80211_CAPINFO_SHORT_SLOTTIME    0x0400
+#define IEEE80211_CAPINFO_APSD              0x0800
+/* bit 12 is reserved */
+#define IEEE80211_CAPINFO_DSSSOFDM          0x2000
+/* bits 14-15 are reserved */
+
+/*
+ * Authentication Modes
+ */
+
+enum ieee80211_authmode {
+    IEEE80211_AUTH_NONE     = 0,
+    IEEE80211_AUTH_OPEN     = 1,
+    IEEE80211_AUTH_SHARED   = 2,
+    IEEE80211_AUTH_8021X    = 3,
+    IEEE80211_AUTH_AUTO     = 4,   /* auto-select/accept */
+    /* NB: these are used only for ioctls */
+    IEEE80211_AUTH_WPA      = 5,  /* WPA/RSN  w/ 802.1x */
+    IEEE80211_AUTH_WPA_PSK  = 6,  /* WPA/RSN  w/ PSK */
+    IEEE80211_AUTH_WPA_CCKM = 7,  /* WPA/RSN IE  w/ CCKM */
+};
+
+#include "athendpack.h"
+
+#endif /* _NET80211_IEEE80211_H_ */
diff --git a/drivers/ar6000/include/ieee80211_ioctl.h b/drivers/ar6000/include/ieee80211_ioctl.h
new file mode 100644
index 00000000000..dab6747c496
--- /dev/null
+++ b/drivers/ar6000/include/ieee80211_ioctl.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/ieee80211_ioctl.h#1 $
+ */
+
+#ifndef _IEEE80211_IOCTL_H_
+#define _IEEE80211_IOCTL_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Extracted from the MADWIFI net80211/ieee80211_ioctl.h
+ */
+
+/*
+ * WPA/RSN get/set key request.  Specify the key/cipher
+ * type and whether the key is to be used for sending and/or
+ * receiving.  The key index should be set only when working
+ * with global keys (use IEEE80211_KEYIX_NONE for ``no index'').
+ * Otherwise a unicast/pairwise key is specified by the bssid
+ * (on a station) or mac address (on an ap).  They key length
+ * must include any MIC key data; otherwise it should be no
+ more than IEEE80211_KEYBUF_SIZE.
+ */
+struct ieee80211req_key {
+	u_int8_t	ik_type;	/* key/cipher type */
+	u_int8_t	ik_pad;
+	u_int16_t	ik_keyix;	/* key index */
+	u_int8_t	ik_keylen;	/* key length in bytes */
+	u_int8_t	ik_flags;
+#define IEEE80211_KEY_XMIT  0x01
+#define IEEE80211_KEY_RECV  0x02
+#define	IEEE80211_KEY_DEFAULT	0x80	/* default xmit key */
+	u_int8_t	ik_macaddr[IEEE80211_ADDR_LEN];
+	u_int64_t	ik_keyrsc;	/* key receive sequence counter */
+	u_int64_t	ik_keytsc;	/* key transmit sequence counter */
+	u_int8_t	ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
+};
+/*
+ * Delete a key either by index or address.  Set the index
+ * to IEEE80211_KEYIX_NONE when deleting a unicast key.
+ */
+struct ieee80211req_del_key {
+	u_int8_t	idk_keyix;	/* key index */
+	u_int8_t	idk_macaddr[IEEE80211_ADDR_LEN];
+};
+/*
+ * MLME state manipulation request.  IEEE80211_MLME_ASSOC
+ * only makes sense when operating as a station.  The other
+ * requests can be used when operating as a station or an
+ * ap (to effect a station).
+ */
+struct ieee80211req_mlme {
+	u_int8_t	im_op;		/* operation to perform */
+#define	IEEE80211_MLME_ASSOC		1	/* associate station */
+#define	IEEE80211_MLME_DISASSOC		2	/* disassociate station */
+#define	IEEE80211_MLME_DEAUTH		3	/* deauthenticate station */
+#define	IEEE80211_MLME_AUTHORIZE	4	/* authorize station */
+#define	IEEE80211_MLME_UNAUTHORIZE	5	/* unauthorize station */
+	u_int16_t	im_reason;	/* 802.11 reason code */
+	u_int8_t	im_macaddr[IEEE80211_ADDR_LEN];
+};
+
+struct ieee80211req_addpmkid {
+    u_int8_t    pi_bssid[IEEE80211_ADDR_LEN];
+    u_int8_t    pi_enable;
+    u_int8_t    pi_pmkid[16];
+};
+
+#define AUTH_ALG_OPEN_SYSTEM	0x01
+#define AUTH_ALG_SHARED_KEY	0x02
+#define AUTH_ALG_LEAP		0x04
+
+struct ieee80211req_authalg {
+   u_int8_t auth_alg;
+};
+
+/*
+ * Request to add an IE to a Management Frame
+ */
+enum{
+    IEEE80211_APPIE_FRAME_BEACON     = 0,
+    IEEE80211_APPIE_FRAME_PROBE_REQ  = 1,
+    IEEE80211_APPIE_FRAME_PROBE_RESP = 2,
+    IEEE80211_APPIE_FRAME_ASSOC_REQ  = 3,
+    IEEE80211_APPIE_FRAME_ASSOC_RESP = 4,
+    IEEE80211_APPIE_NUM_OF_FRAME     = 5
+};
+
+/*
+ * The Maximum length of the IE that can be added to a Management frame
+ */
+#define IEEE80211_APPIE_FRAME_MAX_LEN  78
+
+struct ieee80211req_getset_appiebuf {
+    u_int32_t app_frmtype; /* management frame type for which buffer is added */
+    u_int32_t app_buflen;  /*application supplied buffer length */
+    u_int8_t  app_buf[];
+};
+
+/*
+ * The following definitions are used by an application to set filter
+ * for receiving management frames
+ */
+enum {
+     IEEE80211_FILTER_TYPE_BEACON      =   0x1,
+     IEEE80211_FILTER_TYPE_PROBE_REQ   =   0x2,
+     IEEE80211_FILTER_TYPE_PROBE_RESP  =   0x4,
+     IEEE80211_FILTER_TYPE_ASSOC_REQ   =   0x8,
+     IEEE80211_FILTER_TYPE_ASSOC_RESP  =   0x10,
+     IEEE80211_FILTER_TYPE_AUTH        =   0x20,
+     IEEE80211_FILTER_TYPE_DEAUTH      =   0x40,
+     IEEE80211_FILTER_TYPE_DISASSOC    =   0x80,
+     IEEE80211_FILTER_TYPE_ALL         =   0xFF  /* used to check the valid filter bits */
+};
+
+struct ieee80211req_set_filter {
+      u_int32_t app_filterype; /* management frame filter type */
+};
+
+enum {
+    IEEE80211_PARAM_AUTHMODE = 3,   /* Authentication Mode */
+    IEEE80211_PARAM_MCASTCIPHER = 5,
+    IEEE80211_PARAM_MCASTKEYLEN = 6,    /* multicast key length */
+    IEEE80211_PARAM_UCASTCIPHER = 8,
+    IEEE80211_PARAM_UCASTKEYLEN = 9,    /* unicast key length */
+	IEEE80211_PARAM_WPA		= 10,	/* WPA mode (0,1,2) */
+	IEEE80211_PARAM_ROAMING		= 12,	/* roaming mode */
+	IEEE80211_PARAM_PRIVACY		= 13,	/* privacy invoked */
+	IEEE80211_PARAM_COUNTERMEASURES	= 14,	/* WPA/TKIP countermeasures */
+	IEEE80211_PARAM_DROPUNENCRYPTED	= 15,	/* discard unencrypted frames */
+};
+
+/*
+ * Values for IEEE80211_PARAM_WPA
+ */
+#define WPA_MODE_WPA1   1
+#define WPA_MODE_WPA2   2
+#define WPA_MODE_AUTO   3
+#define WPA_MODE_NONE   4
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _IEEE80211_IOCTL_H_ */
diff --git a/drivers/ar6000/include/ieee80211_node.h b/drivers/ar6000/include/ieee80211_node.h
new file mode 100644
index 00000000000..46b613c09c6
--- /dev/null
+++ b/drivers/ar6000/include/ieee80211_node.h
@@ -0,0 +1,77 @@
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
+ * Copyright (c) 2006 Atheros Communications, Inc.
+ *
+ * Wireless Network driver for Atheros AR6001
+ * All rights reserved.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef _IEEE80211_NODE_H_
+#define _IEEE80211_NODE_H_
+
+/*
+ * Node locking definitions.
+ */
+#define IEEE80211_NODE_LOCK_INIT(_nt)   A_MUTEX_INIT(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_LOCK_DESTROY(_nt)
+#define IEEE80211_NODE_LOCK(_nt)        A_MUTEX_LOCK(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_UNLOCK(_nt)      A_MUTEX_UNLOCK(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_LOCK_BH(_nt)     A_MUTEX_LOCK(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_UNLOCK_BH(_nt)   A_MUTEX_UNLOCK(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_LOCK_ASSERT(_nt)
+
+/*
+ * Node reference counting definitions.
+ *
+ * ieee80211_node_initref   initialize the reference count to 1
+ * ieee80211_node_incref    add a reference
+ * ieee80211_node_decref    remove a reference
+ * ieee80211_node_dectestref    remove a reference and return 1 if this
+ *              is the last reference, otherwise 0
+ * ieee80211_node_refcnt    reference count for printing (only)
+ */
+#define ieee80211_node_initref(_ni)     ((_ni)->ni_refcnt = 1)
+#define ieee80211_node_incref(_ni)      ((_ni)->ni_refcnt++)
+#define ieee80211_node_decref(_ni)      ((_ni)->ni_refcnt--)
+#define ieee80211_node_dectestref(_ni)  (((_ni)->ni_refcnt--) == 0)
+#define ieee80211_node_refcnt(_ni)      ((_ni)->ni_refcnt)
+
+#define IEEE80211_NODE_HASHSIZE 32
+/* simple hash is enough for variation of macaddr */
+#define IEEE80211_NODE_HASH(addr)   \
+    (((const A_UINT8 *)(addr))[IEEE80211_ADDR_LEN - 1] % \
+        IEEE80211_NODE_HASHSIZE)
+
+/*
+ * Table of ieee80211_node instances.  Each ieee80211com
+ * has at least one for holding the scan candidates.
+ * When operating as an access point or in ibss mode there
+ * is a second table for associated stations or neighbors.
+ */
+struct ieee80211_node_table {
+    void                   *nt_wmip;       /* back reference */
+    A_MUTEX_T               nt_nodelock;    /* on node table */
+    struct bss              *nt_node_first; /* information of all nodes */
+    struct bss              *nt_node_last;  /* information of all nodes */
+    struct bss              *nt_hash[IEEE80211_NODE_HASHSIZE];
+    const char              *nt_name;   /* for debugging */
+    A_UINT32                nt_scangen; /* gen# for timeout scan */
+    A_TIMER                 nt_inact_timer;
+    A_UINT8                 isTimerArmed;   /* is the node timer armed */
+};
+
+#define WLAN_NODE_INACT_TIMEOUT_MSEC            10000
+
+#endif /* _IEEE80211_NODE_H_ */
diff --git a/drivers/ar6000/include/ini_dset.h b/drivers/ar6000/include/ini_dset.h
new file mode 100644
index 00000000000..410f2b52597
--- /dev/null
+++ b/drivers/ar6000/include/ini_dset.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+#ifndef _INI_DSET_H_
+#define _INI_DSET_H_
+
+/*
+ * Each of these represents a WHAL INI table, which consists
+ * of an "address column" followed by 1 or more "value columns".
+ *
+ * Software uses the base WHAL_INI_DATA_ID+column to access a
+ * DataSet that holds a particular column of data.
+ */
+typedef enum {
+    WHAL_INI_DATA_ID_NULL               =0,
+    WHAL_INI_DATA_ID_MODE_SPECIFIC      =1,  /* 2,3 */
+    WHAL_INI_DATA_ID_COMMON             =4,  /* 5 */
+    WHAL_INI_DATA_ID_BB_RFGAIN          =6,  /* 7,8 */
+    WHAL_INI_DATA_ID_ANALOG_BANK1       =9,  /* 10 */
+    WHAL_INI_DATA_ID_ANALOG_BANK2       =11, /* 12 */
+    WHAL_INI_DATA_ID_ANALOG_BANK3       =13, /* 14, 15 */
+    WHAL_INI_DATA_ID_ANALOG_BANK6       =16, /* 17, 18 */
+    WHAL_INI_DATA_ID_ANALOG_BANK7       =19, /* 20 */
+    WHAL_INI_DATA_ID_MODE_OVERRIDES     =21, /* 22,23 */
+    WHAL_INI_DATA_ID_COMMON_OVERRIDES   =24, /* 25 */
+
+    WHAL_INI_DATA_ID_MAX                =25
+} WHAL_INI_DATA_ID;
+
+typedef PREPACK struct {
+    A_UINT16 freqIndex; // 1 - A mode 2 - B or G mode 0 - common
+    A_UINT16 offset;
+    A_UINT32 newValue;
+} POSTPACK INI_DSET_REG_OVERRIDE;
+
+#endif
diff --git a/drivers/ar6000/include/regDb.h b/drivers/ar6000/include/regDb.h
new file mode 100644
index 00000000000..b3f665ff5f2
--- /dev/null
+++ b/drivers/ar6000/include/regDb.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2005 Atheros Communications, Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This module contains the header files for regulatory module,
+ * which include the DB schema and DB values.
+ * $Id:
+ */
+
+#ifndef __REG_DB_H__
+#define __REG_DB_H__
+
+#include "./regulatory/reg_dbschema.h"
+#include "./regulatory/reg_dbvalues.h"
+
+#endif  /* __REG_DB_H__ */
diff --git a/drivers/ar6000/include/regdump.h b/drivers/ar6000/include/regdump.h
new file mode 100644
index 00000000000..0106825ce27
--- /dev/null
+++ b/drivers/ar6000/include/regdump.h
@@ -0,0 +1,33 @@
+#ifndef __REGDUMP_H__
+#define __REGDUMP_H__
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+#if defined(AR6001)
+#include "AR6001/AR6001_regdump.h"
+#endif
+#if defined(AR6002)
+#include "AR6002/AR6002_regdump.h"
+#endif
+
+#if !defined(__ASSEMBLER__)
+/*
+ * Target CPU state at the time of failure is reflected
+ * in a register dump, which the Host can fetch through
+ * the diagnostic window.
+ */
+struct register_dump_s {
+    A_UINT32 target_id;               /* Target ID */
+    A_UINT32 assline;                 /* Line number (if assertion failure) */
+    A_UINT32 pc;                      /* Program Counter at time of exception */
+    A_UINT32 badvaddr;                /* Virtual address causing exception */
+    CPU_exception_frame_t exc_frame;  /* CPU-specific exception info */
+
+    /* Could copy top of stack here, too.... */
+};
+#endif /* __ASSEMBLER__ */
+#endif /* __REGDUMP_H__ */
diff --git a/drivers/ar6000/include/targaddrs.h b/drivers/ar6000/include/targaddrs.h
new file mode 100644
index 00000000000..da2a6509020
--- /dev/null
+++ b/drivers/ar6000/include/targaddrs.h
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __TARGADDRS_H__
+#define __TARGADDRS_H__
+#if defined(AR6001)
+#include "AR6001/addrs.h"
+#endif
+#if defined(AR6002)
+#include "AR6002/addrs.h"
+#endif
+
+/*
+ * AR6K option bits, to enable/disable various features.
+ * By default, all option bits are 0.
+ * These bits can be set in LOCAL_SCRATCH register 0.
+ */
+#define AR6K_OPTION_BMI_DISABLE      0x01 /* Disable BMI comm with Host */
+#define AR6K_OPTION_SERIAL_ENABLE    0x02 /* Enable serial port msgs */
+#define AR6K_OPTION_WDT_DISABLE      0x04 /* WatchDog Timer override */
+#define AR6K_OPTION_SLEEP_DISABLE    0x08 /* Disable system sleep */
+#define AR6K_OPTION_STOP_BOOT        0x10 /* Stop boot processes (for ATE) */
+#define AR6K_OPTION_ENABLE_NOANI     0x20 /* Operate without ANI */
+#define AR6K_OPTION_DSET_DISABLE     0x40 /* Ignore DataSets */
+#define AR6K_OPTION_IGNORE_FLASH     0x80 /* Ignore flash during bootup */
+
+/*
+ * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the
+ * host_interest structure.  It must match the address of the _host_interest
+ * symbol (see linker script).
+ *
+ * Host Interest is shared between Host and Target in order to coordinate
+ * between the two, and is intended to remain constant (with additions only
+ * at the end) across software releases.
+ */
+#define AR6001_HOST_INTEREST_ADDRESS     0x80000600
+#define AR6002_HOST_INTEREST_ADDRESS     0x00500400
+
+#define HOST_INTEREST_MAX_SIZE          0x100
+
+#if !defined(__ASSEMBLER__)
+struct register_dump_s;
+struct dbglog_hdr_s;
+
+/*
+ * These are items that the Host may need to access
+ * via BMI or via the Diagnostic Window. The position
+ * of items in this structure must remain constant
+ * across firmware revisions!
+ *
+ * Types for each item must be fixed size across
+ * target and host platforms.
+ *
+ * More items may be added at the end.
+ */
+struct host_interest_s {
+    /*
+     * Pointer to application-defined area, if any.
+     * Set by Target application during startup.
+     */
+    A_UINT32               hi_app_host_interest;                      /* 0x00 */
+
+    /* Pointer to register dump area, valid after Target crash. */
+    A_UINT32               hi_failure_state;                          /* 0x04 */
+
+    /* Pointer to debug logging header */
+    A_UINT32               hi_dbglog_hdr;                             /* 0x08 */
+
+    /* Indicates whether or not flash is present on Target.
+     * NB: flash_is_present indicator is here not just
+     * because it might be of interest to the Host; but
+     * also because it's set early on by Target's startup
+     * asm code and we need it to have a special RAM address
+     * so that it doesn't get reinitialized with the rest
+     * of data.
+     */
+    A_UINT32               hi_flash_is_present;                       /* 0x0c */
+
+    /*
+     * General-purpose flag bits, similar to AR6000_OPTION_* flags.
+     * Can be used by application rather than by OS.
+     */
+    A_UINT32               hi_option_flag;                            /* 0x10 */
+
+    /*
+     * Boolean that determines whether or not to
+     * display messages on the serial port.
+     */
+    A_UINT32               hi_serial_enable;                          /* 0x14 */
+
+    /* Start address of Flash DataSet index, if any */
+    A_UINT32               hi_dset_list_head;                         /* 0x18 */
+
+    /* Override Target application start address */
+    A_UINT32               hi_app_start;                              /* 0x1c */
+
+    /* Clock and voltage tuning */
+    A_UINT32               hi_skip_clock_init;                        /* 0x20 */
+    A_UINT32               hi_core_clock_setting;                     /* 0x24 */
+    A_UINT32               hi_cpu_clock_setting;                      /* 0x28 */
+    A_UINT32               hi_system_sleep_setting;                   /* 0x2c */
+    A_UINT32               hi_xtal_control_setting;                   /* 0x30 */
+    A_UINT32               hi_pll_ctrl_setting_24ghz;                 /* 0x34 */
+    A_UINT32               hi_pll_ctrl_setting_5ghz;                  /* 0x38 */
+    A_UINT32               hi_ref_voltage_trim_setting;               /* 0x3c */
+    A_UINT32               hi_clock_info;                             /* 0x40 */
+
+    /*
+     * Flash configuration overrides, used only
+     * when firmware is not executing from flash.
+     * (When using flash, modify the global variables
+     * with equivalent names.)
+     */
+    A_UINT32               hi_bank0_addr_value;                       /* 0x44 */
+    A_UINT32               hi_bank0_read_value;                       /* 0x48 */
+    A_UINT32               hi_bank0_write_value;                      /* 0x4c */
+    A_UINT32               hi_bank0_config_value;                     /* 0x50 */
+
+    /* Pointer to Board Data  */
+    A_UINT32               hi_board_data;                             /* 0x54 */
+    A_UINT32               hi_board_data_initialized;                 /* 0x58 */
+
+    A_UINT32               hi_dset_RAM_index_table;                   /* 0x5c */
+
+    A_UINT32               hi_desired_baud_rate;                      /* 0x60 */
+    A_UINT32               hi_dbglog_config;                          /* 0x64 */
+    A_UINT32               hi_end_RAM_reserve_sz;                     /* 0x68 */
+    A_UINT32               hi_mbox_io_block_sz;                       /* 0x6c */
+
+    A_UINT32               hi_num_bpatch_streams;                     /* 0x70 */
+    A_UINT32               hi_mbox_isr_yield_limit;                   /* 0x74 */
+
+    A_UINT32               hi_refclk_hz;                              /* 0x78 */
+};
+
+/* Bits defined in hi_option_flag */
+#define HI_OPTION_TIMER_WAR     1 /* not really used */
+
+/*
+ * Intended for use by Host software, this macro returns the Target RAM
+ * address of any item in the host_interest structure.
+ * Example: target_addr = AR6001_HOST_INTEREST_ITEM_ADDRESS(hi_board_data);
+ */
+#define AR6001_HOST_INTEREST_ITEM_ADDRESS(item) \
+    ((A_UINT32)&((((struct host_interest_s *)(AR6001_HOST_INTEREST_ADDRESS))->item)))
+
+#define AR6002_HOST_INTEREST_ITEM_ADDRESS(item) \
+    ((A_UINT32)&((((struct host_interest_s *)(AR6002_HOST_INTEREST_ADDRESS))->item)))
+
+
+#endif /* !__ASSEMBLER__ */
+
+#endif /* __TARGADDRS_H__ */
diff --git a/drivers/ar6000/include/testcmd.h b/drivers/ar6000/include/testcmd.h
new file mode 100644
index 00000000000..737533adb4d
--- /dev/null
+++ b/drivers/ar6000/include/testcmd.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef  TESTCMD_H_
+#define  TESTCMD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    ZEROES_PATTERN = 0,
+    ONES_PATTERN,
+    REPEATING_10,
+    PN7_PATTERN,
+    PN9_PATTERN,
+    PN15_PATTERN
+}TX_DATA_PATTERN;
+
+/* Continous tx
+   mode : TCMD_CONT_TX_OFF - Disabling continous tx
+          TCMD_CONT_TX_SINE - Enable continuous unmodulated tx
+          TCMD_CONT_TX_FRAME- Enable continuous modulated tx
+   freq : Channel freq in Mhz. (e.g 2412 for channel 1 in 11 g)
+dataRate: 0 - 1 Mbps
+          1 - 2 Mbps
+          2 - 5.5 Mbps
+          3 - 11 Mbps
+          4 - 6 Mbps
+          5 - 9 Mbps
+          6 - 12 Mbps
+          7 - 18 Mbps
+          8 - 24 Mbps
+          9 - 36 Mbps
+         10 - 28 Mbps
+         11 - 54 Mbps
+  txPwr: Tx power in dBm[5 -11] for unmod Tx, [5-14] for mod Tx
+antenna:  1 - one antenna
+          2 - two antenna
+Note : Enable/disable continuous tx test cmd works only when target is awake.
+*/
+
+typedef enum {
+    TCMD_CONT_TX_OFF = 0,
+    TCMD_CONT_TX_SINE,
+    TCMD_CONT_TX_FRAME,
+    TCMD_CONT_TX_TX99,
+    TCMD_CONT_TX_TX100
+} TCMD_CONT_TX_MODE;
+
+typedef PREPACK struct {
+    A_UINT32                 testCmdId;
+    A_UINT32                mode;
+    A_UINT32                freq;
+    A_UINT32                dataRate;
+    A_INT32                 txPwr;
+    A_UINT32                antenna;
+    A_UINT32                enANI;
+    A_UINT32                scramblerOff;
+    A_UINT32                aifsn;
+    A_UINT16                pktSz;
+    A_UINT16                txPattern;
+} POSTPACK TCMD_CONT_TX;
+
+#define TCMD_TXPATTERN_ZERONE                 0x1
+#define TCMD_TXPATTERN_ZERONE_DIS_SCRAMBLE    0x2
+
+/* Continuous Rx
+ act: TCMD_CONT_RX_PROMIS - promiscuous mode (accept all incoming frames)
+      TCMD_CONT_RX_FILTER - filter mode (accept only frames with dest
+                                             address equal specified
+                                             mac address (set via act =3)
+      TCMD_CONT_RX_REPORT  off mode  (disable cont rx mode and get the
+                                          report from the last cont
+                                          Rx test)
+
+     TCMD_CONT_RX_SETMAC - set MacAddr mode (sets the MAC address for the
+                                                 target. This Overrides
+                                                 the default MAC address.)
+
+*/
+typedef enum {
+    TCMD_CONT_RX_PROMIS =0,
+    TCMD_CONT_RX_FILTER,
+    TCMD_CONT_RX_REPORT,
+    TCMD_CONT_RX_SETMAC
+} TCMD_CONT_RX_ACT;
+
+typedef PREPACK struct {
+    A_UINT32         testCmdId;
+    A_UINT32        act;
+    A_UINT32        enANI;
+    PREPACK union {
+        struct PREPACK TCMD_CONT_RX_PARA {
+            A_UINT32    freq;
+            A_UINT32    antenna;
+        } POSTPACK para;
+        struct PREPACK TCMD_CONT_RX_REPORT {
+            A_UINT32    totalPkt;
+            A_INT32    rssiInDBm;
+        } POSTPACK report;
+        struct PREPACK TCMD_CONT_RX_MAC {
+            A_UCHAR    addr[ATH_MAC_LEN];
+        } POSTPACK mac;
+    } POSTPACK u;
+} POSTPACK TCMD_CONT_RX;
+
+/* Force sleep/wake  test cmd
+ mode: TCMD_PM_WAKEUP - Wakeup the target
+       TCMD_PM_SLEEP - Force the target to sleep.
+ */
+typedef enum {
+    TCMD_PM_WAKEUP = 1, /* be consistent with target */
+    TCMD_PM_SLEEP
+} TCMD_PM_MODE;
+
+typedef PREPACK struct {
+	A_UINT32  testCmdId;
+    A_UINT32  mode;
+} POSTPACK TCMD_PM;
+
+typedef enum{
+    TCMD_CONT_TX_ID,
+    TCMD_CONT_RX_ID,
+    TCMD_PM_ID
+   } TCMD_ID;
+
+typedef PREPACK union {
+          TCMD_CONT_TX contTx;
+          TCMD_CONT_RX contRx;
+          TCMD_PM pm ;
+} POSTPACK TEST_CMD;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* TESTCMD_H_ */
diff --git a/drivers/ar6000/include/wlan_api.h b/drivers/ar6000/include/wlan_api.h
new file mode 100644
index 00000000000..aabca4b7b6e
--- /dev/null
+++ b/drivers/ar6000/include/wlan_api.h
@@ -0,0 +1,101 @@
+#ifndef _HOST_WLAN_API_H_
+#define _HOST_WLAN_API_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains the API for the host wlan module
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/wlan_api.h#1 $
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct ieee80211_node_table;
+struct ieee80211_frame;
+
+struct ieee80211_common_ie {
+    A_UINT16    ie_chan;
+    A_UINT8     *ie_tstamp;
+    A_UINT8     *ie_ssid;
+    A_UINT8     *ie_rates;
+    A_UINT8     *ie_xrates;
+    A_UINT8     *ie_country;
+    A_UINT8     *ie_wpa;
+    A_UINT8     *ie_rsn;
+    A_UINT8     *ie_wmm;
+    A_UINT8     *ie_ath;
+    A_UINT16    ie_capInfo;
+    A_UINT16    ie_beaconInt;
+    A_UINT8     *ie_tim;
+    A_UINT8     *ie_chswitch;
+    A_UINT8     ie_erp;
+    A_UINT8     *ie_wsc;
+};
+
+typedef struct bss {
+    A_UINT8                      ni_macaddr[6];
+    A_UINT8                      ni_snr;
+    A_INT16                      ni_rssi;
+    struct bss                   *ni_list_next;
+    struct bss                   *ni_list_prev;
+    struct bss                   *ni_hash_next;
+    struct bss                   *ni_hash_prev;
+    struct ieee80211_common_ie   ni_cie;
+    A_UINT8                     *ni_buf;
+    struct ieee80211_node_table *ni_table;
+    A_UINT32                     ni_refcnt;
+    int                          ni_scangen;
+    A_UINT32                     ni_tstamp;
+} bss_t;
+
+typedef void wlan_node_iter_func(void *arg, bss_t *);
+
+bss_t *wlan_node_alloc(struct ieee80211_node_table *nt, int wh_size);
+void wlan_node_free(bss_t *ni);
+void wlan_setup_node(struct ieee80211_node_table *nt, bss_t *ni,
+                const A_UINT8 *macaddr);
+bss_t *wlan_find_node(struct ieee80211_node_table *nt, const A_UINT8 *macaddr);
+void wlan_node_reclaim(struct ieee80211_node_table *nt, bss_t *ni);
+void wlan_free_allnodes(struct ieee80211_node_table *nt);
+void wlan_iterate_nodes(struct ieee80211_node_table *nt, wlan_node_iter_func *f,
+                        void *arg);
+
+void wlan_node_table_init(void *wmip, struct ieee80211_node_table *nt);
+void wlan_node_table_reset(struct ieee80211_node_table *nt);
+void wlan_node_table_cleanup(struct ieee80211_node_table *nt);
+
+A_STATUS wlan_parse_beacon(A_UINT8 *buf, int framelen,
+                           struct ieee80211_common_ie *cie);
+
+A_UINT16 wlan_ieee2freq(int chan);
+A_UINT32 wlan_freq2ieee(A_UINT16 freq);
+
+
+bss_t *
+wlan_find_Ssidnode (struct ieee80211_node_table *nt, A_UCHAR *pSsid,
+					A_UINT32 ssidLength, A_BOOL bIsWPA2);
+
+void
+wlan_node_return (struct ieee80211_node_table *nt, bss_t *ni);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HOST_WLAN_API_H_ */
diff --git a/drivers/ar6000/include/wlan_dset.h b/drivers/ar6000/include/wlan_dset.h
new file mode 100644
index 00000000000..8a876d6476c
--- /dev/null
+++ b/drivers/ar6000/include/wlan_dset.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2007 Atheros Communications, Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __WLAN_DSET_H__
+#define __WKAN_DSET_H__
+
+typedef PREPACK struct wow_config_dset {
+
+    A_UINT8 valid_dset;
+    A_UINT8 gpio_enable;
+    A_UINT16 gpio_pin;
+} POSTPACK WOW_CONFIG_DSET;
+
+#endif
diff --git a/drivers/ar6000/include/wmi.h b/drivers/ar6000/include/wmi.h
new file mode 100644
index 00000000000..045acd4d398
--- /dev/null
+++ b/drivers/ar6000/include/wmi.h
@@ -0,0 +1,1743 @@
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains the definitions of the WMI protocol specified in the
+ * Wireless Module Interface (WMI).  It includes definitions of all the
+ * commands and events. Commands are messages from the host to the WM.
+ * Events and Replies are messages from the WM to the host.
+ *
+ * Ownership of correctness in regards to WMI commands
+ * belongs to the host driver and the WM is not required to validate
+ * parameters for value, proper range, or any other checking.
+ *
+ */
+
+#ifndef _WMI_H_
+#define _WMI_H_
+
+#ifndef ATH_TARGET
+#include "athstartpack.h"
+#endif
+
+#include "wmix.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define WMI_PROTOCOL_VERSION    0x0002
+#define WMI_PROTOCOL_REVISION   0x0000
+
+#define ATH_MAC_LEN             6               /* length of mac in bytes */
+#define WMI_CMD_MAX_LEN         100
+#define WMI_CONTROL_MSG_MAX_LEN     256
+#define WMI_OPT_CONTROL_MSG_MAX_LEN 1536
+#define IS_ETHERTYPE(_typeOrLen)        ((_typeOrLen) >= 0x0600)
+#define RFC1042OUI      {0x00, 0x00, 0x00}
+
+#define IP_ETHERTYPE 0x0800
+
+#define WMI_IMPLICIT_PSTREAM 0xFF
+#define WMI_MAX_THINSTREAM 15
+
+struct host_app_area_s {
+    A_UINT32 wmi_protocol_ver;
+};
+
+/*
+ * Data Path
+ */
+typedef PREPACK struct {
+    A_UINT8     dstMac[ATH_MAC_LEN];
+    A_UINT8     srcMac[ATH_MAC_LEN];
+    A_UINT16    typeOrLen;
+} POSTPACK ATH_MAC_HDR;
+
+typedef PREPACK struct {
+    A_UINT8     dsap;
+    A_UINT8     ssap;
+    A_UINT8     cntl;
+    A_UINT8     orgCode[3];
+    A_UINT16    etherType;
+} POSTPACK ATH_LLC_SNAP_HDR;
+
+typedef enum {
+    DATA_MSGTYPE = 0x0,
+    CNTL_MSGTYPE,
+    SYNC_MSGTYPE
+} WMI_MSG_TYPE;
+
+
+typedef PREPACK struct {
+    A_INT8      rssi;
+    A_UINT8     info;            /* WMI_MSG_TYPE in lower 2 bits - b1b0 */
+                                 /* UP in next 3 bits - b4b3b2 */
+#define WMI_DATA_HDR_MSG_TYPE_MASK  0x03
+#define WMI_DATA_HDR_MSG_TYPE_SHIFT 0
+#define WMI_DATA_HDR_UP_MASK        0x07
+#define WMI_DATA_HDR_UP_SHIFT       2
+#define WMI_DATA_HDR_IS_MSG_TYPE(h, t)  (((h)->info & (WMI_DATA_HDR_MSG_TYPE_MASK)) == (t))
+} POSTPACK WMI_DATA_HDR;
+
+
+#define WMI_DATA_HDR_SET_MSG_TYPE(h, t) (h)->info = (((h)->info & ~(WMI_DATA_HDR_MSG_TYPE_MASK << WMI_DATA_HDR_MSG_TYPE_SHIFT)) | (t << WMI_DATA_HDR_MSG_TYPE_SHIFT))
+#define WMI_DATA_HDR_SET_UP(h, p) (h)->info = (((h)->info & ~(WMI_DATA_HDR_UP_MASK << WMI_DATA_HDR_UP_SHIFT)) | (p << WMI_DATA_HDR_UP_SHIFT))
+
+/*
+ * Control Path
+ */
+typedef PREPACK struct {
+    A_UINT16    commandId;
+} POSTPACK WMI_CMD_HDR;        /* used for commands and events */
+
+/*
+ * List of Commnands
+ */
+typedef enum {
+    WMI_CONNECT_CMDID           = 0x0001,
+    WMI_RECONNECT_CMDID,
+    WMI_DISCONNECT_CMDID,
+    WMI_SYNCHRONIZE_CMDID,
+    WMI_CREATE_PSTREAM_CMDID,
+    WMI_DELETE_PSTREAM_CMDID,
+    WMI_START_SCAN_CMDID,
+    WMI_SET_SCAN_PARAMS_CMDID,
+    WMI_SET_BSS_FILTER_CMDID,
+    WMI_SET_PROBED_SSID_CMDID,
+    WMI_SET_LISTEN_INT_CMDID,
+    WMI_SET_BMISS_TIME_CMDID,
+    WMI_SET_DISC_TIMEOUT_CMDID,
+    WMI_GET_CHANNEL_LIST_CMDID,
+    WMI_SET_BEACON_INT_CMDID,
+    WMI_GET_STATISTICS_CMDID,
+    WMI_SET_CHANNEL_PARAMS_CMDID,
+    WMI_SET_POWER_MODE_CMDID,
+    WMI_SET_IBSS_PM_CAPS_CMDID,
+    WMI_SET_POWER_PARAMS_CMDID,
+    WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID,
+    WMI_ADD_CIPHER_KEY_CMDID,
+    WMI_DELETE_CIPHER_KEY_CMDID,
+    WMI_ADD_KRK_CMDID,
+    WMI_DELETE_KRK_CMDID,
+    WMI_SET_PMKID_CMDID,
+    WMI_SET_TX_PWR_CMDID,
+    WMI_GET_TX_PWR_CMDID,
+    WMI_SET_ASSOC_INFO_CMDID,
+    WMI_ADD_BAD_AP_CMDID,
+    WMI_DELETE_BAD_AP_CMDID,
+    WMI_SET_TKIP_COUNTERMEASURES_CMDID,
+    WMI_RSSI_THRESHOLD_PARAMS_CMDID,
+    WMI_TARGET_ERROR_REPORT_BITMASK_CMDID,
+    WMI_SET_ACCESS_PARAMS_CMDID,
+    WMI_SET_RETRY_LIMITS_CMDID,
+    WMI_SET_OPT_MODE_CMDID,
+    WMI_OPT_TX_FRAME_CMDID,
+    WMI_SET_VOICE_PKT_SIZE_CMDID,
+    WMI_SET_MAX_SP_LEN_CMDID,
+    WMI_SET_ROAM_CTRL_CMDID,
+    WMI_GET_ROAM_TBL_CMDID,
+    WMI_GET_ROAM_DATA_CMDID,
+    WMI_ENABLE_RM_CMDID,
+    WMI_SET_MAX_OFFHOME_DURATION_CMDID,
+    WMI_EXTENSION_CMDID,                        /* Non-wireless extensions */
+    WMI_SNR_THRESHOLD_PARAMS_CMDID,
+    WMI_LQ_THRESHOLD_PARAMS_CMDID,
+    WMI_SET_LPREAMBLE_CMDID,
+    WMI_SET_RTS_CMDID,
+    WMI_CLR_RSSI_SNR_CMDID,
+    WMI_SET_FIXRATES_CMDID,
+    WMI_GET_FIXRATES_CMDID,
+    WMI_SET_AUTH_MODE_CMDID,
+    WMI_SET_REASSOC_MODE_CMDID,
+    WMI_SET_WMM_CMDID,
+    WMI_SET_WMM_TXOP_CMDID,
+    WMI_TEST_CMDID,
+    WMI_SET_BT_STATUS_CMDID,
+    WMI_SET_BT_PARAMS_CMDID,
+
+    WMI_SET_KEEPALIVE_CMDID,
+    WMI_GET_KEEPALIVE_CMDID,
+    WMI_SET_APPIE_CMDID,
+    WMI_GET_APPIE_CMDID,
+    WMI_SET_WSC_STATUS_CMDID,
+
+    /* Wake on Wireless */
+    WMI_SET_HOST_SLEEP_MODE_CMDID,
+    WMI_SET_WOW_MODE_CMDID,
+    WMI_GET_WOW_LIST_CMDID,
+    WMI_ADD_WOW_PATTERN_CMDID,
+    WMI_DEL_WOW_PATTERN_CMDID,
+    WMI_SET_MAC_ADDRESS_CMDID,
+    WMI_SET_AKMP_PARAMS_CMDID,
+    WMI_SET_PMKID_LIST_CMDID,
+    WMI_GET_PMKID_LIST_CMDID,
+
+    /*
+     * Developer commands starts at 0xF000
+     */
+    WMI_SET_BITRATE_CMDID = 0xF000,
+    WMI_GET_BITRATE_CMDID,
+    WMI_SET_WHALPARAM_CMDID,
+
+} WMI_COMMAND_ID;
+
+/*
+ * Frame Types
+ */
+typedef enum {
+    WMI_FRAME_BEACON        =   0,
+    WMI_FRAME_PROBE_REQ,
+    WMI_FRAME_PROBE_RESP,
+    WMI_FRAME_ASSOC_REQ,
+    WMI_FRAME_ASSOC_RESP,
+    WMI_NUM_MGMT_FRAME
+} WMI_MGMT_FRAME_TYPE;
+
+/*
+ * Connect Command
+ */
+typedef enum {
+    INFRA_NETWORK       = 0x01,
+    ADHOC_NETWORK       = 0x02,
+    ADHOC_CREATOR       = 0x04,
+} NETWORK_TYPE;
+
+typedef enum {
+    OPEN_AUTH           = 0x01,
+    SHARED_AUTH         = 0x02,
+    LEAP_AUTH           = 0x04,  /* different from IEEE_AUTH_MODE definitions */
+} DOT11_AUTH_MODE;
+
+typedef enum {
+    NONE_AUTH           = 0x01,
+    WPA_AUTH            = 0x02,
+    WPA_PSK_AUTH        = 0x03,
+    WPA2_AUTH           = 0x04,
+    WPA2_PSK_AUTH       = 0x05,
+    WPA_AUTH_CCKM       = 0x06,
+    WPA2_AUTH_CCKM      = 0x07,
+} AUTH_MODE;
+
+typedef enum {
+    NONE_CRYPT          = 0x01,
+    WEP_CRYPT           = 0x02,
+    TKIP_CRYPT          = 0x03,
+    AES_CRYPT           = 0x04,
+} CRYPTO_TYPE;
+
+#define WMI_MIN_CRYPTO_TYPE NONE_CRYPT
+#define WMI_MAX_CRYPTO_TYPE (AES_CRYPT + 1)
+
+#define WMI_MIN_KEY_INDEX   0
+#define WMI_MAX_KEY_INDEX   3
+
+#define WMI_MAX_KEY_LEN     32
+
+#define WMI_MAX_SSID_LEN    32
+
+typedef enum {
+    CONNECT_ASSOC_POLICY_USER = 0x0001,
+    CONNECT_SEND_REASSOC = 0x0002,
+    CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
+    CONNECT_PROFILE_MATCH_DONE = 0x0008,
+    CONNECT_IGNORE_AAC_BEACON = 0x0010,
+    CONNECT_CSA_FOLLOW_BSS = 0x0020,
+} WMI_CONNECT_CTRL_FLAGS_BITS;
+
+#define DEFAULT_CONNECT_CTRL_FLAGS         (CONNECT_CSA_FOLLOW_BSS)
+
+typedef PREPACK struct {
+    A_UINT8     networkType;
+    A_UINT8     dot11AuthMode;
+    A_UINT8     authMode;
+    A_UINT8     pairwiseCryptoType;
+    A_UINT8     pairwiseCryptoLen;
+    A_UINT8     groupCryptoType;
+    A_UINT8     groupCryptoLen;
+    A_UINT8     ssidLength;
+    A_UCHAR     ssid[WMI_MAX_SSID_LEN];
+    A_UINT16    channel;
+    A_UINT8     bssid[ATH_MAC_LEN];
+    A_UINT32    ctrl_flags;
+} POSTPACK WMI_CONNECT_CMD;
+
+/*
+ * WMI_RECONNECT_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT16    channel;                    /* hint */
+    A_UINT8     bssid[ATH_MAC_LEN];         /* mandatory if set */
+} POSTPACK WMI_RECONNECT_CMD;
+
+/*
+ * WMI_ADD_CIPHER_KEY_CMDID
+ */
+typedef enum {
+    PAIRWISE_USAGE      = 0x00,
+    GROUP_USAGE         = 0x01,
+    TX_USAGE            = 0x02,     /* default Tx Key - Static WEP only */
+} KEY_USAGE;
+
+/*
+ * Bit Flag
+ * Bit 0 - Initialise TSC - default is Initialize
+ */
+#define KEY_OP_INIT_TSC       0x01
+#define KEY_OP_INIT_RSC       0x02
+
+#define KEY_OP_INIT_VAL     0x03     /* Default Initialise the TSC & RSC */
+#define KEY_OP_VALID_MASK   0x03
+
+typedef PREPACK struct {
+    A_UINT8     keyIndex;
+    A_UINT8     keyType;
+    A_UINT8     keyUsage;           /* KEY_USAGE */
+    A_UINT8     keyLength;
+    A_UINT8     keyRSC[8];          /* key replay sequence counter */
+    A_UINT8     key[WMI_MAX_KEY_LEN];
+    A_UINT8     key_op_ctrl;       /* Additional Key Control information */
+} POSTPACK WMI_ADD_CIPHER_KEY_CMD;
+
+/*
+ * WMI_DELETE_CIPHER_KEY_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT8     keyIndex;
+} POSTPACK WMI_DELETE_CIPHER_KEY_CMD;
+
+#define WMI_KRK_LEN     16
+/*
+ * WMI_ADD_KRK_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT8     krk[WMI_KRK_LEN];
+} POSTPACK WMI_ADD_KRK_CMD;
+
+/*
+ * WMI_SET_TKIP_COUNTERMEASURES_CMDID
+ */
+typedef enum {
+    WMI_TKIP_CM_DISABLE = 0x0,
+    WMI_TKIP_CM_ENABLE  = 0x1,
+} WMI_TKIP_CM_CONTROL;
+
+typedef PREPACK struct {
+    A_UINT8  cm_en;                     /* WMI_TKIP_CM_CONTROL */
+} POSTPACK WMI_SET_TKIP_COUNTERMEASURES_CMD;
+
+/*
+ * WMI_SET_PMKID_CMDID
+ */
+
+#define WMI_PMKID_LEN 16
+
+typedef enum {
+   PMKID_DISABLE = 0,
+   PMKID_ENABLE  = 1,
+} PMKID_ENABLE_FLG;
+
+typedef PREPACK struct {
+    A_UINT8     bssid[ATH_MAC_LEN];
+    A_UINT8     enable;                 /* PMKID_ENABLE_FLG */
+    A_UINT8     pmkid[WMI_PMKID_LEN];
+} POSTPACK WMI_SET_PMKID_CMD;
+
+/*
+ * WMI_START_SCAN_CMD
+ */
+typedef enum {
+    WMI_LONG_SCAN  = 0,
+    WMI_SHORT_SCAN = 1,
+} WMI_SCAN_TYPE;
+
+typedef PREPACK struct {
+    A_BOOL   forceFgScan;
+    A_BOOL   isLegacy;        /* For Legacy Cisco AP compatibility */
+    A_UINT32 homeDwellTime;   /* Maximum duration in the home channel(milliseconds) */
+    A_UINT32 forceScanInterval;    /* Time interval between scans (milliseconds)*/
+    A_UINT8  scanType;           /* WMI_SCAN_TYPE */
+} POSTPACK WMI_START_SCAN_CMD;
+
+/*
+ * WMI_SET_SCAN_PARAMS_CMDID
+ */
+#define WMI_SHORTSCANRATIO_DEFAULT      3
+typedef enum {
+    CONNECT_SCAN_CTRL_FLAGS = 0x01,    /* set if can scan in the Connect cmd */
+    SCAN_CONNECTED_CTRL_FLAGS = 0x02,  /* set if scan for the SSID it is */
+                                       /* already connected to */
+    ACTIVE_SCAN_CTRL_FLAGS = 0x04,     /* set if enable active scan */
+    ROAM_SCAN_CTRL_FLAGS = 0x08,       /* set if enable roam scan when bmiss and lowrssi */
+    REPORT_BSSINFO_CTRL_FLAGS = 0x10,   /* set if follows customer BSSINFO reporting rule */
+    ENABLE_AUTO_CTRL_FLAGS = 0x20,      /* if disabled, target doesn't
+                                          scan after a disconnect event  */
+    ENABLE_SCAN_ABORT_EVENT = 0x40      /* Scan complete event with canceled status will be generated when a scan is prempted before it gets completed */
+
+} WMI_SCAN_CTRL_FLAGS_BITS;
+
+#define CAN_SCAN_IN_CONNECT(flags)      (flags & CONNECT_SCAN_CTRL_FLAGS)
+#define CAN_SCAN_CONNECTED(flags)       (flags & SCAN_CONNECTED_CTRL_FLAGS)
+#define ENABLE_ACTIVE_SCAN(flags)       (flags & ACTIVE_SCAN_CTRL_FLAGS)
+#define ENABLE_ROAM_SCAN(flags)         (flags & ROAM_SCAN_CTRL_FLAGS)
+#define CONFIG_REPORT_BSSINFO(flags)     (flags & REPORT_BSSINFO_CTRL_FLAGS)
+#define IS_AUTO_SCAN_ENABLED(flags)      (flags & ENABLE_AUTO_CTRL_FLAGS)
+#define SCAN_ABORT_EVENT_ENABLED(flags) (flags & ENABLE_SCAN_ABORT_EVENT)
+
+#define DEFAULT_SCAN_CTRL_FLAGS         (CONNECT_SCAN_CTRL_FLAGS| SCAN_CONNECTED_CTRL_FLAGS| ACTIVE_SCAN_CTRL_FLAGS| ROAM_SCAN_CTRL_FLAGS | ENABLE_AUTO_CTRL_FLAGS)
+
+
+typedef PREPACK struct {
+    A_UINT16    fg_start_period;        /* seconds */
+    A_UINT16    fg_end_period;          /* seconds */
+    A_UINT16    bg_period;              /* seconds */
+    A_UINT16    maxact_chdwell_time;    /* msec */
+    A_UINT16    pas_chdwell_time;       /* msec */
+    A_UINT8     shortScanRatio;         /* how many shorts scan for one long */
+    A_UINT8     scanCtrlFlags;
+    A_UINT16    minact_chdwell_time;    /* msec */
+    A_UINT32    max_dfsch_act_time;  /* msecs */
+} POSTPACK WMI_SCAN_PARAMS_CMD;
+
+/*
+ * WMI_SET_BSS_FILTER_CMDID
+ */
+typedef enum {
+    NONE_BSS_FILTER = 0x0,              /* no beacons forwarded */
+    ALL_BSS_FILTER,                     /* all beacons forwarded */
+    PROFILE_FILTER,                     /* only beacons matching profile */
+    ALL_BUT_PROFILE_FILTER,             /* all but beacons matching profile */
+    CURRENT_BSS_FILTER,                 /* only beacons matching current BSS */
+    ALL_BUT_BSS_FILTER,                 /* all but beacons matching BSS */
+    PROBED_SSID_FILTER,                 /* beacons matching probed ssid */
+    LAST_BSS_FILTER,                    /* marker only */
+} WMI_BSS_FILTER;
+
+typedef PREPACK struct {
+    A_UINT8    bssFilter;                      /* see WMI_BSS_FILTER */
+    A_UINT32   ieMask;
+} POSTPACK WMI_BSS_FILTER_CMD;
+
+/*
+ * WMI_SET_PROBED_SSID_CMDID
+ */
+#define MAX_PROBED_SSID_INDEX   5
+
+typedef enum {
+    DISABLE_SSID_FLAG  = 0,                  /* disables entry */
+    SPECIFIC_SSID_FLAG = 0x01,               /* probes specified ssid */
+    ANY_SSID_FLAG      = 0x02,               /* probes for any ssid */
+} WMI_SSID_FLAG;
+
+typedef PREPACK struct {
+    A_UINT8     entryIndex;                     /* 0 to MAX_PROBED_SSID_INDEX */
+    A_UINT8     flag;                           /* WMI_SSID_FLG */
+    A_UINT8     ssidLength;
+    A_UINT8     ssid[32];
+} POSTPACK WMI_PROBED_SSID_CMD;
+
+/*
+ * WMI_SET_LISTEN_INT_CMDID
+ * The Listen interval is between 15 and 3000 TUs
+ */
+#define MIN_LISTEN_INTERVAL 15
+#define MAX_LISTEN_INTERVAL 5000
+#define MIN_LISTEN_BEACONS 1
+#define MAX_LISTEN_BEACONS 50
+
+typedef PREPACK struct {
+    A_UINT16     listenInterval;
+    A_UINT16     numBeacons;
+} POSTPACK WMI_LISTEN_INT_CMD;
+
+/*
+ * WMI_SET_BEACON_INT_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT16     beaconInterval;
+} POSTPACK WMI_BEACON_INT_CMD;
+
+/*
+ * WMI_SET_BMISS_TIME_CMDID
+ * valid values are between 1000 and 5000 TUs
+ */
+
+#define MIN_BMISS_TIME     1000
+#define MAX_BMISS_TIME     5000
+#define MIN_BMISS_BEACONS  1
+#define MAX_BMISS_BEACONS  50
+
+typedef PREPACK struct {
+    A_UINT16     bmissTime;
+    A_UINT16     numBeacons;
+} POSTPACK WMI_BMISS_TIME_CMD;
+
+/*
+ * WMI_SET_POWER_MODE_CMDID
+ */
+typedef enum {
+    REC_POWER = 0x01,
+    MAX_PERF_POWER,
+} WMI_POWER_MODE;
+
+typedef PREPACK struct {
+    A_UINT8     powerMode;      /* WMI_POWER_MODE */
+} POSTPACK WMI_POWER_MODE_CMD;
+
+/*
+ * WMI_SET_POWER_PARAMS_CMDID
+ */
+typedef enum {
+    IGNORE_DTIM = 0x01,
+    NORMAL_DTIM = 0x02,
+    STICK_DTIM  = 0x03,
+} WMI_DTIM_POLICY;
+
+typedef PREPACK struct {
+    A_UINT16    idle_period;             /* msec */
+    A_UINT16    pspoll_number;
+    A_UINT16    dtim_policy;
+} POSTPACK WMI_POWER_PARAMS_CMD;
+
+typedef PREPACK struct {
+    A_UINT8    power_saving;
+    A_UINT8    ttl; /* number of beacon periods */
+    A_UINT16   atim_windows;          /* msec */
+    A_UINT16   timeout_value;         /* msec */
+} POSTPACK WMI_IBSS_PM_CAPS_CMD;
+
+/*
+ * WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID
+ */
+typedef enum {
+    IGNORE_TIM_ALL_QUEUES_APSD = 0,
+    PROCESS_TIM_ALL_QUEUES_APSD = 1,
+    IGNORE_TIM_SIMULATED_APSD = 2,
+    PROCESS_TIM_SIMULATED_APSD = 3,
+} APSD_TIM_POLICY;
+
+typedef PREPACK struct {
+    A_UINT16    psPollTimeout;          /* msec */
+    A_UINT16    triggerTimeout;         /* msec */
+    A_UINT32    apsdTimPolicy;      /* TIM behavior with  ques APSD enabled. Default is IGNORE_TIM_ALL_QUEUES_APSD */
+    A_UINT32    simulatedAPSDTimPolicy;      /* TIM behavior with  simulated APSD enabled. Default is PROCESS_TIM_SIMULATED_APSD */
+} POSTPACK WMI_POWERSAVE_TIMERS_POLICY_CMD;
+
+/*
+ * WMI_SET_VOICE_PKT_SIZE_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT16    voicePktSize;
+} POSTPACK WMI_SET_VOICE_PKT_SIZE_CMD;
+
+/*
+ * WMI_SET_MAX_SP_LEN_CMDID
+ */
+typedef enum {
+    DELIVER_ALL_PKT = 0x0,
+    DELIVER_2_PKT = 0x1,
+    DELIVER_4_PKT = 0x2,
+    DELIVER_6_PKT = 0x3,
+} APSD_SP_LEN_TYPE;
+
+typedef PREPACK struct {
+    A_UINT8    maxSPLen;
+} POSTPACK WMI_SET_MAX_SP_LEN_CMD;
+
+/*
+ * WMI_SET_DISC_TIMEOUT_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT8     disconnectTimeout;          /* seconds */
+} POSTPACK WMI_DISC_TIMEOUT_CMD;
+
+typedef enum {
+    UPLINK_TRAFFIC = 0,
+    DNLINK_TRAFFIC = 1,
+    BIDIR_TRAFFIC = 2,
+} DIR_TYPE;
+
+typedef enum {
+    DISABLE_FOR_THIS_AC = 0,
+    ENABLE_FOR_THIS_AC  = 1,
+    ENABLE_FOR_ALL_AC   = 2,
+} VOICEPS_CAP_TYPE;
+
+typedef enum {
+    TRAFFIC_TYPE_APERIODIC = 0,
+    TRAFFIC_TYPE_PERIODIC = 1,
+}TRAFFIC_TYPE;
+
+/*
+ * WMI_CREATE_PSTREAM_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT32        minServiceInt;           /* in milli-sec */
+    A_UINT32        maxServiceInt;           /* in milli-sec */
+    A_UINT32        inactivityInt;           /* in milli-sec */
+    A_UINT32        suspensionInt;           /* in milli-sec */
+    A_UINT32        serviceStartTime;
+    A_UINT32        minDataRate;             /* in bps */
+    A_UINT32        meanDataRate;            /* in bps */
+    A_UINT32        peakDataRate;            /* in bps */
+    A_UINT32        maxBurstSize;
+    A_UINT32        delayBound;
+    A_UINT32        minPhyRate;              /* in bps */
+    A_UINT32        sba;
+    A_UINT32        mediumTime;
+    A_UINT16        nominalMSDU;             /* in octects */
+    A_UINT16        maxMSDU;                 /* in octects */
+    A_UINT8         trafficClass;
+    A_UINT8         trafficType;             /* TRAFFIC_TYPE */
+    A_UINT8         trafficDirection;        /* TRAFFIC_DIR */
+    A_UINT8         voicePSCapability;       /* VOICEPS_CAP_TYPE */
+    A_UINT8         tsid;
+    A_UINT8         userPriority;            /* 802.1D user priority */
+} POSTPACK WMI_CREATE_PSTREAM_CMD;
+
+/*
+ * WMI_DELETE_PSTREAM_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT8     trafficClass;
+    A_UINT8     tsid;
+} POSTPACK WMI_DELETE_PSTREAM_CMD;
+
+/*
+ * WMI_SET_CHANNEL_PARAMS_CMDID
+ */
+typedef enum {
+    WMI_11A_MODE  = 0x1,
+    WMI_11G_MODE  = 0x2,
+    WMI_11AG_MODE = 0x3,
+    WMI_11B_MODE  = 0x4,
+    WMI_11GONLY_MODE = 0x5,
+} WMI_PHY_MODE;
+
+#define WMI_MAX_CHANNELS        32
+
+typedef PREPACK struct {
+    A_UINT8     reserved1;
+    A_UINT8     scanParam;              /* set if enable scan */
+    A_UINT8     phyMode;                /* see WMI_PHY_MODE */
+    A_UINT8     numChannels;            /* how many channels follow */
+    A_UINT16    channelList[1];         /* channels in Mhz */
+} POSTPACK WMI_CHANNEL_PARAMS_CMD;
+
+
+/*
+ *  WMI_RSSI_THRESHOLD_PARAMS_CMDID
+ *  Setting the polltime to 0 would disable polling.
+ *  Threshold values are in the ascending order, and should agree to:
+ *  (lowThreshold_lowerVal < lowThreshold_upperVal < highThreshold_lowerVal
+ *      < highThreshold_upperVal)
+ */
+
+typedef PREPACK struct WMI_RSSI_THRESHOLD_PARAMS{
+    A_UINT32    pollTime;               /* Polling time as a factor of LI */
+    A_INT16     thresholdAbove1_Val;          /* lowest of upper */
+    A_INT16     thresholdAbove2_Val;
+    A_INT16     thresholdAbove3_Val;
+    A_INT16     thresholdAbove4_Val;
+    A_INT16     thresholdAbove5_Val;
+    A_INT16     thresholdAbove6_Val;          /* highest of upper */
+    A_INT16     thresholdBelow1_Val;         /* lowest of bellow */
+    A_INT16     thresholdBelow2_Val;
+    A_INT16     thresholdBelow3_Val;
+    A_INT16     thresholdBelow4_Val;
+    A_INT16     thresholdBelow5_Val;
+    A_INT16     thresholdBelow6_Val;         /* highest of bellow */
+    A_UINT8     weight;                  /* "alpha" */
+    A_UINT8     reserved[3];
+} POSTPACK  WMI_RSSI_THRESHOLD_PARAMS_CMD;
+
+/*
+ *  WMI_SNR_THRESHOLD_PARAMS_CMDID
+ *  Setting the polltime to 0 would disable polling.
+ */
+
+typedef PREPACK struct WMI_SNR_THRESHOLD_PARAMS{
+    A_UINT32    pollTime;               /* Polling time as a factor of LI */
+    A_UINT8     weight;                  /* "alpha" */
+    A_UINT8     thresholdAbove1_Val;      /* lowest of uppper*/
+    A_UINT8     thresholdAbove2_Val;
+    A_UINT8     thresholdAbove3_Val;
+    A_UINT8     thresholdAbove4_Val;      /* highest of upper */
+    A_UINT8     thresholdBelow1_Val;     /* lowest of bellow */
+    A_UINT8     thresholdBelow2_Val;
+    A_UINT8     thresholdBelow3_Val;
+    A_UINT8     thresholdBelow4_Val;     /* highest of bellow */
+    A_UINT8     reserved[3];
+} POSTPACK WMI_SNR_THRESHOLD_PARAMS_CMD;
+
+/*
+ *  WMI_LQ_THRESHOLD_PARAMS_CMDID
+ */
+typedef PREPACK struct WMI_LQ_THRESHOLD_PARAMS {
+    A_UINT8     enable;
+    A_UINT8     thresholdAbove1_Val;
+    A_UINT8     thresholdAbove2_Val;
+    A_UINT8     thresholdAbove3_Val;
+    A_UINT8     thresholdAbove4_Val;
+    A_UINT8     thresholdBelow1_Val;
+    A_UINT8     thresholdBelow2_Val;
+    A_UINT8     thresholdBelow3_Val;
+    A_UINT8     thresholdBelow4_Val;
+    A_UINT8     reserved[3];
+} POSTPACK  WMI_LQ_THRESHOLD_PARAMS_CMD;
+
+typedef enum {
+    WMI_LPREAMBLE_DISABLED = 0,
+    WMI_LPREAMBLE_ENABLED
+} WMI_LPREAMBLE_STATUS;
+
+typedef PREPACK struct {
+    A_UINT8     status;
+}POSTPACK WMI_SET_LPREAMBLE_CMD;
+
+typedef PREPACK struct {
+    A_UINT16    threshold;
+}POSTPACK WMI_SET_RTS_CMD;
+
+/*
+ *  WMI_TARGET_ERROR_REPORT_BITMASK_CMDID
+ *  Sets the error reporting event bitmask in target. Target clears it
+ *  upon an error. Subsequent errors are counted, but not reported
+ *  via event, unless the bitmask is set again.
+ */
+typedef PREPACK struct {
+    A_UINT32    bitmask;
+} POSTPACK  WMI_TARGET_ERROR_REPORT_BITMASK;
+
+/*
+ * WMI_SET_TX_PWR_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT8     dbM;                  /* in dbM units */
+} POSTPACK WMI_SET_TX_PWR_CMD, WMI_TX_PWR_REPLY;
+
+/*
+ * WMI_SET_ASSOC_INFO_CMDID
+ *
+ * A maximum of 2 private IEs can be sent in the [Re]Assoc request.
+ * A 3rd one, the CCX version IE can also be set from the host.
+ */
+#define WMI_MAX_ASSOC_INFO_TYPE    2
+#define WMI_CCX_VER_IE             2 /* ieType to set CCX Version IE */
+
+#define WMI_MAX_ASSOC_INFO_LEN     240
+
+typedef PREPACK struct {
+    A_UINT8     ieType;
+    A_UINT8     bufferSize;
+    A_UINT8     assocInfo[1];       /* up to WMI_MAX_ASSOC_INFO_LEN */
+} POSTPACK WMI_SET_ASSOC_INFO_CMD;
+
+
+/*
+ * WMI_GET_TX_PWR_CMDID does not take any parameters
+ */
+
+/*
+ * WMI_ADD_BAD_AP_CMDID
+ */
+#define WMI_MAX_BAD_AP_INDEX      1
+
+typedef PREPACK struct {
+    A_UINT8     badApIndex;         /* 0 to WMI_MAX_BAD_AP_INDEX */
+    A_UINT8     bssid[ATH_MAC_LEN];
+} POSTPACK WMI_ADD_BAD_AP_CMD;
+
+/*
+ * WMI_DELETE_BAD_AP_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT8     badApIndex;         /* 0 to WMI_MAX_BAD_AP_INDEX */
+} POSTPACK WMI_DELETE_BAD_AP_CMD;
+
+/*
+ * WMI_SET_ACCESS_PARAMS_CMDID
+ */
+#define WMI_DEFAULT_TXOP_ACPARAM    0       /* implies one MSDU */
+#define WMI_DEFAULT_ECWMIN_ACPARAM  4       /* corresponds to CWmin of 15 */
+#define WMI_DEFAULT_ECWMAX_ACPARAM  10      /* corresponds to CWmax of 1023 */
+#define WMI_MAX_CW_ACPARAM          15      /* maximum eCWmin or eCWmax */
+#define WMI_DEFAULT_AIFSN_ACPARAM   2
+#define WMI_MAX_AIFSN_ACPARAM       15
+typedef PREPACK struct {
+    A_UINT16 txop;                      /* in units of 32 usec */
+    A_UINT8  eCWmin;
+    A_UINT8  eCWmax;
+    A_UINT8  aifsn;
+} POSTPACK WMI_SET_ACCESS_PARAMS_CMD;
+
+
+/*
+ * WMI_SET_RETRY_LIMITS_CMDID
+ *
+ * This command is used to customize the number of retries the
+ * wlan device will perform on a given frame.
+ */
+#define WMI_MIN_RETRIES 2
+#define WMI_MAX_RETRIES 13
+typedef enum {
+    MGMT_FRAMETYPE    = 0,
+    CONTROL_FRAMETYPE = 1,
+    DATA_FRAMETYPE    = 2
+} WMI_FRAMETYPE;
+
+typedef PREPACK struct {
+    A_UINT8 frameType;                      /* WMI_FRAMETYPE */
+    A_UINT8 trafficClass;                   /* applies only to DATA_FRAMETYPE */
+    A_UINT8 maxRetries;
+    A_UINT8 enableNotify;
+} POSTPACK WMI_SET_RETRY_LIMITS_CMD;
+
+/*
+ * WMI_SET_ROAM_CTRL_CMDID
+ *
+ * This command is used to influence the Roaming behaviour
+ * Set the host biases of the BSSs before setting the roam mode as bias
+ * based.
+ */
+
+/*
+ * Different types of Roam Control
+ */
+
+typedef enum {
+        WMI_FORCE_ROAM          = 1,      /* Roam to the specified BSSID */
+        WMI_SET_ROAM_MODE       = 2,      /* default ,progd bias, no roam */
+        WMI_SET_HOST_BIAS       = 3,     /* Set the Host Bias */
+        WMI_SET_LOWRSSI_SCAN_PARAMS = 4, /* Set lowrssi Scan parameters */
+} WMI_ROAM_CTRL_TYPE;
+
+#define WMI_MIN_ROAM_CTRL_TYPE WMI_FORCE_ROAM
+#define WMI_MAX_ROAM_CTRL_TYPE WMI_SET_LOWRSSI_SCAN_PARAMS
+
+/*
+ * ROAM MODES
+ */
+
+typedef enum {
+        WMI_DEFAULT_ROAM_MODE   = 1,  /* RSSI based ROAM */
+        WMI_HOST_BIAS_ROAM_MODE = 2, /* HOST BIAS based ROAM */
+        WMI_LOCK_BSS_MODE  = 3  /* Lock to the Current BSS - no Roam */
+} WMI_ROAM_MODE;
+
+/*
+ * BSS HOST BIAS INFO
+ */
+
+typedef PREPACK struct {
+        A_UINT8 bssid[ATH_MAC_LEN];
+        A_INT8  bias;
+} POSTPACK WMI_BSS_BIAS;
+
+typedef PREPACK struct {
+        A_UINT8 numBss;
+        WMI_BSS_BIAS bssBias[1];
+} POSTPACK WMI_BSS_BIAS_INFO;
+
+typedef PREPACK struct WMI_LOWRSSI_SCAN_PARAMS {
+        A_UINT16 lowrssi_scan_period;
+        A_INT16  lowrssi_scan_threshold;
+        A_INT16  lowrssi_roam_threshold;
+        A_UINT8  roam_rssi_floor;
+        A_UINT8  reserved[1];              /* For alignment */
+} POSTPACK WMI_LOWRSSI_SCAN_PARAMS;
+
+typedef PREPACK struct {
+    PREPACK union {
+        A_UINT8 bssid[ATH_MAC_LEN]; /* WMI_FORCE_ROAM */
+        A_UINT8 roamMode;           /* WMI_SET_ROAM_MODE  */
+        WMI_BSS_BIAS_INFO bssBiasInfo; /* WMI_SET_HOST_BIAS */
+        WMI_LOWRSSI_SCAN_PARAMS lrScanParams;
+    } POSTPACK info;
+    A_UINT8   roamCtrlType ;
+} POSTPACK WMI_SET_ROAM_CTRL_CMD;
+
+/*
+ * WMI_ENABLE_RM_CMDID
+ */
+typedef PREPACK struct {
+        A_BOOL enable_radio_measurements;
+} POSTPACK WMI_ENABLE_RM_CMD;
+
+/*
+ * WMI_SET_MAX_OFFHOME_DURATION_CMDID
+ */
+typedef PREPACK struct {
+        A_UINT8 max_offhome_duration;
+} POSTPACK WMI_SET_MAX_OFFHOME_DURATION_CMD;
+
+typedef PREPACK struct {
+    A_UINT32 frequency;
+    A_UINT8  threshold;
+} POSTPACK WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD;
+
+typedef enum {
+    BT_STREAM_UNDEF = 0,
+    BT_STREAM_SCO,             /* SCO stream */
+    BT_STREAM_A2DP,            /* A2DP stream */
+    BT_STREAM_MAX
+} BT_STREAM_TYPE;
+
+typedef enum {
+    BT_PARAM_SCO = 1,         /* SCO stream parameters */
+    BT_PARAM_A2DP,            /* A2DP stream parameters */
+    BT_PARAM_MISC,            /* miscellaneous parameters */
+    BT_PARAM_REGS,            /* co-existence register parameters */
+    BT_PARAM_MAX
+} BT_PARAM_TYPE;
+
+typedef enum {
+    BT_STATUS_UNDEF = 0,
+    BT_STATUS_START,
+    BT_STATUS_STOP,
+    BT_STATUS_RESUME,
+    BT_STATUS_SUSPEND,
+    BT_STATUS_MAX
+} BT_STREAM_STATUS;
+
+typedef PREPACK struct {
+    A_UINT8 streamType;
+    A_UINT8 status;
+} POSTPACK WMI_SET_BT_STATUS_CMD;
+
+typedef PREPACK struct {
+    A_UINT8 noSCOPkts;
+    A_UINT8 pspollTimeout;
+    A_UINT8 stompbt;
+} POSTPACK BT_PARAMS_SCO;
+
+typedef PREPACK struct {
+    A_UINT32 period;
+    A_UINT32 dutycycle;
+    A_UINT8  stompbt;
+} POSTPACK BT_PARAMS_A2DP;
+
+typedef PREPACK struct {
+    A_UINT32 mode;
+    A_UINT32 scoWghts;
+    A_UINT32 a2dpWghts;
+    A_UINT32 genWghts;
+    A_UINT32 mode2;
+    A_UINT8  setVal;
+} POSTPACK BT_COEX_REGS;
+
+typedef enum {
+    WLAN_PROTECT_POLICY = 1,
+    WLAN_COEX_CTRL_FLAGS
+} BT_PARAMS_MISC_TYPE;
+
+typedef enum {
+    WLAN_PROTECT_PER_STREAM = 0x01,   /* default */
+    WLAN_PROTECT_ANY_TX = 0x02
+} WLAN_PROTECT_FLAGS;
+
+
+#define WLAN_DISABLE_COEX_IN_DISCONNECT   0x01 /* default */
+#define WLAN_KEEP_COEX_IN_DISCONNECT      0x02
+#define WLAN_STOMPBT_IN_DISCONNECT        0x04
+
+#define WLAN_DISABLE_COEX_IN_ROAM         0x10 /* default */
+#define WLAN_KEEP_COEX_IN_ROAM            0x20
+#define WLAN_STOMPBT_IN_ROAM              0x40
+
+#define WLAN_DISABLE_COEX_IN_SCAN        0x100 /* default */
+#define WLAN_KEEP_COEX_IN_SCAN           0x200
+#define WLAN_STOMPBT_IN_SCAN             0x400
+
+#define WLAN_DISABLE_COEX_BT_OFF        0x1000 /* default */
+#define WLAN_KEEP_COEX_BT_OFF           0x2000
+#define WLAN_STOMPBT_BT_OFF             0x4000
+
+typedef PREPACK struct {
+    A_UINT32 period;
+    A_UINT32 dutycycle;
+    A_UINT8  stompbt;
+    A_UINT8  policy;
+} POSTPACK WLAN_PROTECT_POLICY_TYPE;
+
+typedef PREPACK struct {
+    PREPACK union {
+        WLAN_PROTECT_POLICY_TYPE protectParams;
+        A_UINT16 wlanCtrlFlags;
+    } POSTPACK info;
+    A_UINT8 paramType;
+} POSTPACK BT_PARAMS_MISC;
+
+typedef PREPACK struct {
+    PREPACK union {
+        BT_PARAMS_SCO scoParams;
+        BT_PARAMS_A2DP a2dpParams;
+        BT_PARAMS_MISC miscParams;
+        BT_COEX_REGS regs;
+    } POSTPACK info;
+    A_UINT8 paramType;
+} POSTPACK WMI_SET_BT_PARAMS_CMD;
+
+/*
+ * Command Replies
+ */
+
+/*
+ * WMI_GET_CHANNEL_LIST_CMDID reply
+ */
+typedef PREPACK struct {
+    A_UINT8     reserved1;
+    A_UINT8     numChannels;            /* number of channels in reply */
+    A_UINT16    channelList[1];         /* channel in Mhz */
+} POSTPACK WMI_CHANNEL_LIST_REPLY;
+
+typedef enum {
+    A_SUCCEEDED = A_OK,
+    A_FAILED_DELETE_STREAM_DOESNOT_EXIST=250,
+    A_SUCCEEDED_MODIFY_STREAM=251,
+    A_FAILED_INVALID_STREAM = 252,
+    A_FAILED_MAX_THINSTREAMS = 253,
+    A_FAILED_CREATE_REMOVE_PSTREAM_FIRST = 254,
+} PSTREAM_REPLY_STATUS;
+
+/*
+ * List of Events (target to host)
+ */
+typedef enum {
+    WMI_READY_EVENTID           = 0x1001,
+    WMI_CONNECT_EVENTID,
+    WMI_DISCONNECT_EVENTID,
+    WMI_BSSINFO_EVENTID,
+    WMI_CMDERROR_EVENTID,
+    WMI_REGDOMAIN_EVENTID,
+    WMI_PSTREAM_TIMEOUT_EVENTID,
+    WMI_NEIGHBOR_REPORT_EVENTID,
+    WMI_TKIP_MICERR_EVENTID,
+    WMI_SCAN_COMPLETE_EVENTID,
+    WMI_REPORT_STATISTICS_EVENTID,
+    WMI_RSSI_THRESHOLD_EVENTID,
+    WMI_ERROR_REPORT_EVENTID,
+    WMI_OPT_RX_FRAME_EVENTID,
+    WMI_REPORT_ROAM_TBL_EVENTID,
+    WMI_EXTENSION_EVENTID,
+    WMI_CAC_EVENTID,
+    WMI_SNR_THRESHOLD_EVENTID,
+    WMI_LQ_THRESHOLD_EVENTID,
+    WMI_TX_RETRY_ERR_EVENTID,
+    WMI_REPORT_ROAM_DATA_EVENTID,
+    WMI_TEST_EVENTID,
+    WMI_APLIST_EVENTID,
+    WMI_GET_WOW_LIST_EVENTID,
+    WMI_GET_PMKID_LIST_EVENTID
+} WMI_EVENT_ID;
+
+typedef enum {
+    WMI_11A_CAPABILITY   = 1,
+    WMI_11G_CAPABILITY   = 2,
+    WMI_11AG_CAPABILITY  = 3,
+} WMI_PHY_CAPABILITY;
+
+typedef PREPACK struct {
+    A_UINT8     macaddr[ATH_MAC_LEN];
+    A_UINT8     phyCapability;              /* WMI_PHY_CAPABILITY */
+} POSTPACK WMI_READY_EVENT;
+
+/*
+ * Connect Event
+ */
+typedef PREPACK struct {
+    A_UINT16    channel;
+    A_UINT8     bssid[ATH_MAC_LEN];
+    A_UINT16    listenInterval;
+    A_UINT16    beaconInterval;
+    A_UINT32    networkType;
+    A_UINT8     beaconIeLen;
+    A_UINT8     assocReqLen;
+    A_UINT8     assocRespLen;
+    A_UINT8     assocInfo[1];
+} POSTPACK WMI_CONNECT_EVENT;
+
+/*
+ * Disconnect Event
+ */
+typedef enum {
+    NO_NETWORK_AVAIL   = 0x01,
+    LOST_LINK          = 0x02,     /* bmiss */
+    DISCONNECT_CMD     = 0x03,
+    BSS_DISCONNECTED   = 0x04,
+    AUTH_FAILED        = 0x05,
+    ASSOC_FAILED       = 0x06,
+    NO_RESOURCES_AVAIL = 0x07,
+    CSERV_DISCONNECT   = 0x08,
+    INVALID_PROFILE    = 0x0a,
+    DOT11H_CHANNEL_SWITCH = 0x0b,
+} WMI_DISCONNECT_REASON;
+
+typedef PREPACK struct {
+    A_UINT16    protocolReasonStatus;  /* reason code, see 802.11 spec. */
+    A_UINT8     bssid[ATH_MAC_LEN];    /* set if known */
+    A_UINT8     disconnectReason ;      /* see WMI_DISCONNECT_REASON */
+    A_UINT8     assocRespLen;
+    A_UINT8     assocInfo[1];
+} POSTPACK WMI_DISCONNECT_EVENT;
+
+/*
+ * BSS Info Event.
+ * Mechanism used to inform host of the presence and characteristic of
+ * wireless networks present.  Consists of bss info header followed by
+ * the beacon or probe-response frame body.  The 802.11 header is not included.
+ */
+typedef enum {
+    BEACON_FTYPE = 0x1,
+    PROBERESP_FTYPE,
+    ACTION_MGMT_FTYPE,
+} WMI_BI_FTYPE;
+
+enum {
+    BSS_ELEMID_CHANSWITCH = 0x01,
+    BSS_ELEMID_ATHEROS = 0x02,
+};
+
+typedef PREPACK struct {
+    A_UINT16    channel;
+    A_UINT8     frameType;          /* see WMI_BI_FTYPE */
+    A_UINT8     snr;
+    A_INT16     rssi;
+    A_UINT8     bssid[ATH_MAC_LEN];
+    A_UINT32    ieMask;
+} POSTPACK WMI_BSS_INFO_HDR;
+
+/*
+ * Command Error Event
+ */
+typedef enum {
+    INVALID_PARAM  = 0x01,
+    ILLEGAL_STATE  = 0x02,
+    INTERNAL_ERROR = 0x03,
+} WMI_ERROR_CODE;
+
+typedef PREPACK struct {
+    A_UINT16    commandId;
+    A_UINT8     errorCode;
+} POSTPACK WMI_CMD_ERROR_EVENT;
+
+/*
+ * New Regulatory Domain Event
+ */
+typedef PREPACK struct {
+    A_UINT32    regDomain;
+} POSTPACK WMI_REG_DOMAIN_EVENT;
+
+typedef PREPACK struct {
+    A_UINT8     trafficClass;
+} POSTPACK WMI_PSTREAM_TIMEOUT_EVENT;
+
+/*
+ * The WMI_NEIGHBOR_REPORT Event is generated by the target to inform
+ * the host of BSS's it has found that matches the current profile.
+ * It can be used by the host to cache PMKs and/to initiate pre-authentication
+ * if the BSS supports it.  The first bssid is always the current associated
+ * BSS.
+ * The bssid and bssFlags information repeats according to the number
+ * or APs reported.
+ */
+typedef enum {
+    WMI_DEFAULT_BSS_FLAGS   = 0x00,
+    WMI_PREAUTH_CAPABLE_BSS = 0x01,
+    WMI_PMKID_VALID_BSS     = 0x02,
+} WMI_BSS_FLAGS;
+
+typedef PREPACK struct {
+    A_UINT8     bssid[ATH_MAC_LEN];
+    A_UINT8     bssFlags;            /* see WMI_BSS_FLAGS */
+} POSTPACK WMI_NEIGHBOR_INFO;
+
+typedef PREPACK struct {
+    A_INT8      numberOfAps;
+    WMI_NEIGHBOR_INFO neighbor[1];
+} POSTPACK WMI_NEIGHBOR_REPORT_EVENT;
+
+/*
+ * TKIP MIC Error Event
+ */
+typedef PREPACK struct {
+    A_UINT8 keyid;
+    A_UINT8 ismcast;
+} POSTPACK WMI_TKIP_MICERR_EVENT;
+
+/*
+ * WMI_SCAN_COMPLETE_EVENTID - no parameters (old), staus parameter (new)
+ */
+typedef PREPACK struct {
+    A_STATUS status;
+} POSTPACK WMI_SCAN_COMPLETE_EVENT;
+
+#define MAX_OPT_DATA_LEN 1400
+
+/*
+ * WMI_SET_ADHOC_BSSID_CMDID
+ */
+typedef PREPACK struct {
+    A_UINT8     bssid[ATH_MAC_LEN];
+} POSTPACK WMI_SET_ADHOC_BSSID_CMD;
+
+/*
+ * WMI_SET_OPT_MODE_CMDID
+ */
+typedef enum {
+    SPECIAL_OFF,
+    SPECIAL_ON,
+} OPT_MODE_TYPE;
+
+typedef PREPACK struct {
+    A_UINT8     optMode;
+} POSTPACK WMI_SET_OPT_MODE_CMD;
+
+/*
+ * WMI_TX_OPT_FRAME_CMDID
+ */
+typedef enum {
+    OPT_PROBE_REQ   = 0x01,
+    OPT_PROBE_RESP  = 0x02,
+    OPT_CPPP_START  = 0x03,
+    OPT_CPPP_STOP   = 0x04,
+} WMI_OPT_FTYPE;
+
+typedef PREPACK struct {
+    A_UINT16    optIEDataLen;
+    A_UINT8     frmType;
+    A_UINT8     dstAddr[ATH_MAC_LEN];
+    A_UINT8     bssid[ATH_MAC_LEN];
+    A_UINT8     reserved;               /* For alignment */
+    A_UINT8     optIEData[1];
+} POSTPACK WMI_OPT_TX_FRAME_CMD;
+
+/*
+ * Special frame receive Event.
+ * Mechanism used to inform host of the receiption of the special frames.
+ * Consists of special frame info header followed by special frame body.
+ * The 802.11 header is not included.
+ */
+typedef PREPACK struct {
+    A_UINT16    channel;
+    A_UINT8     frameType;          /* see WMI_OPT_FTYPE */
+    A_INT8      snr;
+    A_UINT8     srcAddr[ATH_MAC_LEN];
+    A_UINT8     bssid[ATH_MAC_LEN];
+} POSTPACK WMI_OPT_RX_INFO_HDR;
+
+/*
+ * Reporting statistics.
+ */
+typedef PREPACK struct {
+    A_UINT32   tx_packets;
+    A_UINT32   tx_bytes;
+    A_UINT32   tx_unicast_pkts;
+    A_UINT32   tx_unicast_bytes;
+    A_UINT32   tx_multicast_pkts;
+    A_UINT32   tx_multicast_bytes;
+    A_UINT32   tx_broadcast_pkts;
+    A_UINT32   tx_broadcast_bytes;
+    A_UINT32   tx_rts_success_cnt;
+    A_UINT32   tx_packet_per_ac[4];
+    A_UINT32   tx_errors_per_ac[4];
+
+    A_UINT32   tx_errors;
+    A_UINT32   tx_failed_cnt;
+    A_UINT32   tx_retry_cnt;
+    A_UINT32   tx_rts_fail_cnt;
+    A_INT32    tx_unicast_rate;
+}POSTPACK tx_stats_t;
+
+typedef PREPACK struct {
+    A_UINT32   rx_packets;
+    A_UINT32   rx_bytes;
+    A_UINT32   rx_unicast_pkts;
+    A_UINT32   rx_unicast_bytes;
+    A_UINT32   rx_multicast_pkts;
+    A_UINT32   rx_multicast_bytes;
+    A_UINT32   rx_broadcast_pkts;
+    A_UINT32   rx_broadcast_bytes;
+    A_UINT32   rx_fragment_pkt;
+
+    A_UINT32   rx_errors;
+    A_UINT32   rx_crcerr;
+    A_UINT32   rx_key_cache_miss;
+    A_UINT32   rx_decrypt_err;
+    A_UINT32   rx_duplicate_frames;
+    A_INT32    rx_unicast_rate;
+}POSTPACK rx_stats_t;
+
+typedef PREPACK struct {
+    A_UINT32   tkip_local_mic_failure;
+    A_UINT32   tkip_counter_measures_invoked;
+    A_UINT32   tkip_replays;
+    A_UINT32   tkip_format_errors;
+    A_UINT32   ccmp_format_errors;
+    A_UINT32   ccmp_replays;
+}POSTPACK tkip_ccmp_stats_t;
+
+typedef PREPACK struct {
+    A_UINT32   power_save_failure_cnt;
+}POSTPACK pm_stats_t;
+
+typedef PREPACK struct {
+    A_UINT32    cs_bmiss_cnt;
+    A_UINT32    cs_lowRssi_cnt;
+    A_UINT16    cs_connect_cnt;
+    A_UINT16    cs_disconnect_cnt;
+    A_INT16     cs_aveBeacon_rssi;
+    A_UINT16    cs_roam_count;
+    A_UINT16    cs_rssi;
+    A_UINT8     cs_snr;
+    A_UINT8     cs_aveBeacon_snr;
+    A_UINT8     cs_lastRoam_msec;
+} POSTPACK cserv_stats_t;
+
+typedef PREPACK struct {
+    tx_stats_t          tx_stats;
+    rx_stats_t          rx_stats;
+    tkip_ccmp_stats_t   tkipCcmpStats;
+}POSTPACK wlan_net_stats_t;
+
+typedef PREPACK struct {
+    A_UINT32    wow_num_pkts_dropped;
+    A_UINT16    wow_num_events_discarded;
+    A_UINT8     wow_num_host_pkt_wakeups;
+    A_UINT8     wow_num_host_event_wakeups;
+} POSTPACK wlan_wow_stats_t;
+
+typedef PREPACK struct {
+    A_UINT32            lqVal;
+    A_INT32             noise_floor_calibation;
+    pm_stats_t          pmStats;
+    wlan_net_stats_t    txrxStats;
+    wlan_wow_stats_t    wowStats;
+    cserv_stats_t       cservStats;
+} POSTPACK WMI_TARGET_STATS;
+
+/*
+ * WMI_RSSI_THRESHOLD_EVENTID.
+ * Indicate the RSSI events to host. Events are indicated when we breach a
+ * thresold value.
+ */
+typedef enum{
+    WMI_RSSI_THRESHOLD1_ABOVE = 0,
+    WMI_RSSI_THRESHOLD2_ABOVE,
+    WMI_RSSI_THRESHOLD3_ABOVE,
+    WMI_RSSI_THRESHOLD4_ABOVE,
+    WMI_RSSI_THRESHOLD5_ABOVE,
+    WMI_RSSI_THRESHOLD6_ABOVE,
+    WMI_RSSI_THRESHOLD1_BELOW,
+    WMI_RSSI_THRESHOLD2_BELOW,
+    WMI_RSSI_THRESHOLD3_BELOW,
+    WMI_RSSI_THRESHOLD4_BELOW,
+    WMI_RSSI_THRESHOLD5_BELOW,
+    WMI_RSSI_THRESHOLD6_BELOW
+}WMI_RSSI_THRESHOLD_VAL;
+
+typedef PREPACK struct {
+    A_INT16 rssi;
+    A_UINT8 range;
+}POSTPACK WMI_RSSI_THRESHOLD_EVENT;
+
+/*
+ *  WMI_ERROR_REPORT_EVENTID
+ */
+typedef enum{
+    WMI_TARGET_PM_ERR_FAIL      = 0x00000001,
+    WMI_TARGET_KEY_NOT_FOUND    = 0x00000002,
+    WMI_TARGET_DECRYPTION_ERR   = 0x00000004,
+    WMI_TARGET_BMISS            = 0x00000008,
+    WMI_PSDISABLE_NODE_JOIN     = 0x00000010,
+    WMI_TARGET_COM_ERR          = 0x00000020,
+    WMI_TARGET_FATAL_ERR        = 0x00000040
+} WMI_TARGET_ERROR_VAL;
+
+typedef PREPACK struct {
+    A_UINT32 errorVal;
+}POSTPACK  WMI_TARGET_ERROR_REPORT_EVENT;
+
+typedef PREPACK struct {
+    A_UINT8 retrys;
+}POSTPACK  WMI_TX_RETRY_ERR_EVENT;
+
+typedef enum{
+    WMI_SNR_THRESHOLD1_ABOVE = 1,
+    WMI_SNR_THRESHOLD1_BELOW,
+    WMI_SNR_THRESHOLD2_ABOVE,
+    WMI_SNR_THRESHOLD2_BELOW,
+    WMI_SNR_THRESHOLD3_ABOVE,
+    WMI_SNR_THRESHOLD3_BELOW,
+    WMI_SNR_THRESHOLD4_ABOVE,
+    WMI_SNR_THRESHOLD4_BELOW
+} WMI_SNR_THRESHOLD_VAL;
+
+typedef PREPACK struct {
+    A_UINT8 range;  /* WMI_SNR_THRESHOLD_VAL */
+    A_UINT8 snr;
+}POSTPACK  WMI_SNR_THRESHOLD_EVENT;
+
+typedef enum{
+    WMI_LQ_THRESHOLD1_ABOVE = 1,
+    WMI_LQ_THRESHOLD1_BELOW,
+    WMI_LQ_THRESHOLD2_ABOVE,
+    WMI_LQ_THRESHOLD2_BELOW,
+    WMI_LQ_THRESHOLD3_ABOVE,
+    WMI_LQ_THRESHOLD3_BELOW,
+    WMI_LQ_THRESHOLD4_ABOVE,
+    WMI_LQ_THRESHOLD4_BELOW
+} WMI_LQ_THRESHOLD_VAL;
+
+typedef PREPACK struct {
+    A_INT32 lq;
+    A_UINT8 range;  /* WMI_LQ_THRESHOLD_VAL */
+}POSTPACK  WMI_LQ_THRESHOLD_EVENT;
+/*
+ * WMI_REPORT_ROAM_TBL_EVENTID
+ */
+#define MAX_ROAM_TBL_CAND   5
+
+typedef PREPACK struct {
+    A_INT32 roam_util;
+    A_UINT8 bssid[ATH_MAC_LEN];
+    A_INT8  rssi;
+    A_INT8  rssidt;
+    A_INT8  last_rssi;
+    A_INT8  util;
+    A_INT8  bias;
+    A_UINT8 reserved; /* For alignment */
+} POSTPACK WMI_BSS_ROAM_INFO;
+
+
+typedef PREPACK struct {
+    A_UINT16  roamMode;
+    A_UINT16  numEntries;
+    WMI_BSS_ROAM_INFO bssRoamInfo[1];
+} POSTPACK WMI_TARGET_ROAM_TBL;
+
+/*
+ *  WMI_CAC_EVENTID
+ */
+typedef enum {
+    CAC_INDICATION_ADMISSION = 0x00,
+    CAC_INDICATION_ADMISSION_RESP = 0x01,
+    CAC_INDICATION_DELETE = 0x02,
+    CAC_INDICATION_NO_RESP = 0x03,
+}CAC_INDICATION;
+
+#define WMM_TSPEC_IE_LEN   63
+
+typedef PREPACK struct {
+    A_UINT8 ac;
+    A_UINT8 cac_indication;
+    A_UINT8 statusCode;
+    A_UINT8 tspecSuggestion[WMM_TSPEC_IE_LEN];
+}POSTPACK  WMI_CAC_EVENT;
+
+/*
+ * WMI_APLIST_EVENTID
+ */
+
+typedef enum {
+    APLIST_VER1 = 1,
+} APLIST_VER;
+
+typedef PREPACK struct {
+    A_UINT8     bssid[ATH_MAC_LEN];
+    A_UINT16    channel;
+} POSTPACK  WMI_AP_INFO_V1;
+
+typedef PREPACK union {
+    WMI_AP_INFO_V1  apInfoV1;
+} POSTPACK WMI_AP_INFO;
+
+typedef PREPACK struct {
+    A_UINT8     apListVer;
+    A_UINT8     numAP;
+    WMI_AP_INFO apList[1];
+} POSTPACK WMI_APLIST_EVENT;
+
+/*
+ * developer commands
+ */
+
+/*
+ * WMI_SET_BITRATE_CMDID
+ *
+ * Get bit rate cmd uses same definition as set bit rate cmd
+ */
+typedef enum {
+    RATE_AUTO   = -1,
+    RATE_1Mb    = 0,
+    RATE_2Mb    = 1,
+    RATE_5_5Mb  = 2,
+    RATE_11Mb   = 3,
+    RATE_6Mb    = 4,
+    RATE_9Mb    = 5,
+    RATE_12Mb   = 6,
+    RATE_18Mb   = 7,
+    RATE_24Mb   = 8,
+    RATE_36Mb   = 9,
+    RATE_48Mb   = 10,
+    RATE_54Mb   = 11,
+} WMI_BIT_RATE;
+
+typedef PREPACK struct {
+    A_INT8      rateIndex;          /* see WMI_BIT_RATE */
+} POSTPACK WMI_BIT_RATE_CMD, WMI_BIT_RATE_REPLY;
+
+/*
+ * WMI_SET_FIXRATES_CMDID
+ *
+ * Get fix rates cmd uses same definition as set fix rates cmd
+ */
+typedef enum {
+    FIX_RATE_1Mb    = 0x1,
+    FIX_RATE_2Mb    = 0x2,
+    FIX_RATE_5_5Mb  = 0x4,
+    FIX_RATE_11Mb   = 0x8,
+    FIX_RATE_6Mb    = 0x10,
+    FIX_RATE_9Mb    = 0x20,
+    FIX_RATE_12Mb   = 0x40,
+    FIX_RATE_18Mb   = 0x80,
+    FIX_RATE_24Mb   = 0x100,
+    FIX_RATE_36Mb   = 0x200,
+    FIX_RATE_48Mb   = 0x400,
+    FIX_RATE_54Mb   = 0x800,
+} WMI_FIX_RATES_MASK;
+
+typedef PREPACK struct {
+    A_UINT16      fixRateMask;          /* see WMI_BIT_RATE */
+} POSTPACK WMI_FIX_RATES_CMD, WMI_FIX_RATES_REPLY;
+
+/*
+ * WMI_SET_RECONNECT_AUTH_MODE_CMDID
+ *
+ * Set authentication mode
+ */
+typedef enum {
+    RECONN_DO_AUTH = 0x00,
+    RECONN_NOT_AUTH = 0x01
+} WMI_AUTH_MODE;
+
+typedef PREPACK struct {
+    A_UINT8 mode;
+} POSTPACK WMI_SET_AUTH_MODE_CMD;
+
+/*
+ * WMI_SET_REASSOC_MODE_CMDID
+ *
+ * Set authentication mode
+ */
+typedef enum {
+    REASSOC_DO_DISASSOC = 0x00,
+    REASSOC_DONOT_DISASSOC = 0x01
+} WMI_REASSOC_MODE;
+
+typedef PREPACK struct {
+    A_UINT8 mode;
+}POSTPACK WMI_SET_REASSOC_MODE_CMD;
+
+typedef enum {
+    ROAM_DATA_TIME = 1,            /* Get The Roam Time Data */
+} ROAM_DATA_TYPE;
+
+typedef PREPACK struct {
+    A_UINT32        disassoc_time;
+    A_UINT32        no_txrx_time;
+    A_UINT32        assoc_time;
+    A_UINT32        allow_txrx_time;
+    A_UINT32        last_data_txrx_time;
+    A_UINT32        first_data_txrx_time;
+    A_UINT8         disassoc_bssid[ATH_MAC_LEN];
+    A_INT8          disassoc_bss_rssi;
+    A_UINT8         assoc_bssid[ATH_MAC_LEN];
+    A_INT8          assoc_bss_rssi;
+} POSTPACK WMI_TARGET_ROAM_TIME;
+
+typedef PREPACK struct {
+    PREPACK union {
+        WMI_TARGET_ROAM_TIME roamTime;
+    } POSTPACK u;
+    A_UINT8 roamDataType ;
+} POSTPACK WMI_TARGET_ROAM_DATA;
+
+typedef enum {
+    WMI_WMM_DISABLED = 0,
+    WMI_WMM_ENABLED
+} WMI_WMM_STATUS;
+
+typedef PREPACK struct {
+    A_UINT8    status;
+}POSTPACK WMI_SET_WMM_CMD;
+
+typedef enum {
+    WMI_TXOP_DISABLED = 0,
+    WMI_TXOP_ENABLED
+} WMI_TXOP_CFG;
+
+typedef PREPACK struct {
+    A_UINT8    txopEnable;
+}POSTPACK WMI_SET_WMM_TXOP_CMD;
+
+typedef PREPACK struct {
+    A_UINT8 keepaliveInterval;
+} POSTPACK WMI_SET_KEEPALIVE_CMD;
+
+typedef PREPACK struct {
+    A_BOOL configured;
+    A_UINT8 keepaliveInterval;
+} POSTPACK WMI_GET_KEEPALIVE_CMD;
+
+/*
+ * Add Application specified IE to a management frame
+ */
+#define WMI_MAX_IE_LEN  78
+
+typedef PREPACK struct {
+    A_UINT8 mgmtFrmType;  /* one of WMI_MGMT_FRAME_TYPE */
+    A_UINT8 ieLen;    /* Length  of the IE that should be added to the MGMT frame */
+    A_UINT8 ieInfo[1];
+} POSTPACK WMI_SET_APPIE_CMD;
+
+/*
+ * Notify the WSC registration status to the target
+ */
+#define WSC_REG_ACTIVE     1
+#define WSC_REG_INACTIVE   0
+/* Generic Hal Interface for setting hal paramters. */
+/* Add new Set HAL Param cmdIds here for newer params */
+typedef enum {
+   WHAL_SETCABTO_CMDID = 1,
+}WHAL_CMDID;
+
+typedef PREPACK struct {
+    A_UINT8 cabTimeOut;
+} POSTPACK WHAL_SETCABTO_PARAM;
+
+typedef PREPACK struct {
+    A_UINT8  whalCmdId;
+    A_UINT8 data[1];
+} POSTPACK WHAL_PARAMCMD;
+
+
+#define WOW_MAX_FILTER_LISTS 1 /*4*/
+#define WOW_MAX_FILTERS_PER_LIST 4
+#define WOW_PATTERN_SIZE 64
+#define WOW_MASK_SIZE 64
+
+typedef PREPACK struct {
+    A_UINT8 wow_valid_filter;
+    A_UINT8 wow_filter_id;
+    A_UINT8 wow_filter_size;
+    A_UINT8 wow_filter_offset;
+    A_UINT8 wow_filter_mask[WOW_MASK_SIZE];
+    A_UINT8 wow_filter_pattern[WOW_PATTERN_SIZE];
+} POSTPACK WOW_FILTER;
+
+
+typedef PREPACK struct {
+    A_UINT8 wow_valid_list;
+    A_UINT8 wow_list_id;
+    A_UINT8 wow_num_filters;
+    A_UINT8 wow_total_list_size;
+    WOW_FILTER list[WOW_MAX_FILTERS_PER_LIST];
+} POSTPACK WOW_FILTER_LIST;
+
+typedef PREPACK struct {
+    A_BOOL awake;
+    A_BOOL asleep;
+} POSTPACK WMI_SET_HOST_SLEEP_MODE_CMD;
+
+typedef PREPACK struct {
+    A_BOOL enable_wow;
+} POSTPACK WMI_SET_WOW_MODE_CMD;
+
+typedef PREPACK struct {
+    A_UINT8 filter_list_id;
+} POSTPACK WMI_GET_WOW_LIST_CMD;
+
+/*
+ * WMI_GET_WOW_LIST_CMD reply
+ */
+typedef PREPACK struct {
+    A_UINT8     num_filters;     /* number of patterns in reply */
+    A_UINT8     this_filter_num; /*  this is filter # x of total num_filters */
+    A_UINT8     wow_mode;
+    A_UINT8     host_mode;
+    WOW_FILTER  wow_filters[1];
+} POSTPACK WMI_GET_WOW_LIST_REPLY;
+
+typedef PREPACK struct {
+    A_UINT8 filter_list_id;
+    A_UINT8 filter_size;
+    A_UINT8 filter_offset;
+    A_UINT8 filter[1];
+} POSTPACK WMI_ADD_WOW_PATTERN_CMD;
+
+typedef PREPACK struct {
+    A_UINT16 filter_list_id;
+    A_UINT16 filter_id;
+} POSTPACK WMI_DEL_WOW_PATTERN_CMD;
+
+typedef PREPACK struct {
+    A_UINT8 macaddr[ATH_MAC_LEN];
+} POSTPACK WMI_SET_MAC_ADDRESS_CMD;
+
+/*
+ * WMI_SET_AKMP_PARAMS_CMD
+ */
+
+#define WMI_AKMP_MULTI_PMKID_EN   0x000001
+
+typedef PREPACK struct {
+    A_UINT32    akmpInfo;
+} POSTPACK WMI_SET_AKMP_PARAMS_CMD;
+
+typedef PREPACK struct {
+    A_UINT8 pmkid[WMI_PMKID_LEN];
+} POSTPACK WMI_PMKID;
+
+/*
+ * WMI_SET_PMKID_LIST_CMD
+ */
+#define WMI_MAX_PMKID_CACHE   8
+
+typedef PREPACK struct {
+    A_UINT32    numPMKID;
+    WMI_PMKID   pmkidList[WMI_MAX_PMKID_CACHE];
+} POSTPACK WMI_SET_PMKID_LIST_CMD;
+
+/*
+ * WMI_GET_PMKID_LIST_CMD  Reply
+ * Following the Number of PMKIDs is the list of PMKIDs
+ */
+typedef PREPACK struct {
+    A_UINT32    numPMKID;
+    WMI_PMKID   pmkidList[1];
+} POSTPACK WMI_PMKID_LIST_REPLY;
+
+/* index used for priority streams */
+typedef enum {
+    WMI_NOT_MAPPED  = -1,
+    WMI_CONTROL_PRI = 0,
+    WMI_BEST_EFFORT_PRI = 1,
+    WMI_LOW_PRI = 2,
+    WMI_HIGH_PRI = 3,
+    WMI_HIGHEST_PRI,
+    WMI_PRI_MAX_COUNT
+} WMI_PRI_STREAM_ID;
+
+#ifndef ATH_TARGET
+#include "athendpack.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMI_H_ */
diff --git a/drivers/ar6000/include/wmi_api.h b/drivers/ar6000/include/wmi_api.h
new file mode 100644
index 00000000000..267edfd0a9a
--- /dev/null
+++ b/drivers/ar6000/include/wmi_api.h
@@ -0,0 +1,260 @@
+#ifndef _WMI_API_H_
+#define _WMI_API_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains the definitions for the Wireless Module Interface (WMI).
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/wmi_api.h#2 $
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * IP QoS Field definitions according to 802.1p
+ */
+#define BEST_EFFORT_PRI         0
+#define BACKGROUND_PRI          1
+#define EXCELLENT_EFFORT_PRI    3
+#define CONTROLLED_LOAD_PRI     4
+#define VIDEO_PRI               5
+#define VOICE_PRI               6
+#define NETWORK_CONTROL_PRI     7
+#define MAX_NUM_PRI             8
+
+#define UNDEFINED_PRI           (0xff)
+
+/* simple mapping of IP TOS field to a WMI priority stream
+ * this mapping was taken from the original linux driver implementation
+ * The operation maps the following
+ *
+ *  */
+#define IP_TOS_TO_WMI_PRI(tos)  \
+    ((WMI_PRI_STREAM_ID)(((tos) >> 1) & 0x03))
+
+#define WMI_IMPLICIT_PSTREAM_INACTIVITY_INT 5000 /* 5 seconds */
+
+
+struct wmi_t;
+
+void *wmi_init(void *devt);
+
+void wmi_qos_state_init(struct wmi_t *wmip);
+void wmi_shutdown(struct wmi_t *wmip);
+A_UINT16  wmi_get_mapped_qos_queue(struct wmi_t *, A_UINT8);
+A_STATUS wmi_dix_2_dot3(struct wmi_t *wmip, void *osbuf);
+A_STATUS wmi_data_hdr_add(struct wmi_t *wmip, void *osbuf, A_UINT8 msgType);
+A_STATUS wmi_dot3_2_dix(struct wmi_t *wmip, void *osbuf);
+A_STATUS wmi_data_hdr_remove(struct wmi_t *wmip, void *osbuf);
+A_STATUS wmi_syncpoint(struct wmi_t *wmip);
+A_STATUS wmi_syncpoint_reset(struct wmi_t *wmip);
+WMI_PRI_STREAM_ID wmi_get_stream_id(struct wmi_t *wmip, A_UINT8 trafficClass);
+A_UINT8 wmi_implicit_create_pstream(struct wmi_t *wmip, void *osbuf, A_UINT8 dir, A_UINT8 up);
+
+A_STATUS wmi_control_rx(struct wmi_t *wmip, void *osbuf);
+void wmi_iterate_nodes(struct wmi_t *wmip, wlan_node_iter_func *f, void *arg);
+void wmi_free_allnodes(struct wmi_t *wmip);
+bss_t *wmi_find_node(struct wmi_t *wmip, const A_UINT8 *macaddr);
+
+
+typedef enum {
+    NO_SYNC_WMIFLAG = 0,
+    SYNC_BEFORE_WMIFLAG,            /* transmit all queued data before cmd */
+    SYNC_AFTER_WMIFLAG,             /* any new data waits until cmd execs */
+    SYNC_BOTH_WMIFLAG,
+    END_WMIFLAG                     /* end marker */
+} WMI_SYNC_FLAG;
+
+A_STATUS wmi_cmd_send(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
+                      WMI_SYNC_FLAG flag);
+A_STATUS wmi_connect_cmd(struct wmi_t *wmip,
+                         NETWORK_TYPE netType,
+                         DOT11_AUTH_MODE dot11AuthMode,
+                         AUTH_MODE authMode,
+                         CRYPTO_TYPE pairwiseCrypto,
+                         A_UINT8 pairwiseCryptoLen,
+                         CRYPTO_TYPE groupCrypto,
+                         A_UINT8 groupCryptoLen,
+                         int ssidLength,
+                         A_UCHAR *ssid,
+                         A_UINT8 *bssid,
+                         A_UINT16 channel,
+                         A_UINT32 ctrl_flags);
+A_STATUS wmi_reconnect_cmd(struct wmi_t *wmip,
+                           A_UINT8 *bssid,
+                           A_UINT16 channel);
+A_STATUS wmi_disconnect_cmd(struct wmi_t *wmip);
+A_STATUS wmi_getrev_cmd(struct wmi_t *wmip);
+A_STATUS wmi_startscan_cmd(struct wmi_t *wmip, WMI_SCAN_TYPE scanType,
+                           A_BOOL forceFgScan, A_BOOL isLegacy,
+                           A_UINT32 homeDwellTime, A_UINT32 forceScanInterval);
+A_STATUS wmi_scanparams_cmd(struct wmi_t *wmip, A_UINT16 fg_start_sec,
+                            A_UINT16 fg_end_sec, A_UINT16 bg_sec,
+                            A_UINT16 minact_chdw_msec,
+                            A_UINT16 maxact_chdw_msec, A_UINT16 pas_chdw_msec,
+                            A_UINT8 shScanRatio, A_UINT8 scanCtrlFlags,
+                            A_UINT32 max_dfsch_act_time);
+A_STATUS wmi_bssfilter_cmd(struct wmi_t *wmip, A_UINT8 filter, A_UINT32 ieMask);
+A_STATUS wmi_probedSsid_cmd(struct wmi_t *wmip, A_UINT8 index, A_UINT8 flag,
+                            A_UINT8 ssidLength, A_UCHAR *ssid);
+A_STATUS wmi_listeninterval_cmd(struct wmi_t *wmip, A_UINT16 listenInterval, A_UINT16 listenBeacons);
+A_STATUS wmi_bmisstime_cmd(struct wmi_t *wmip, A_UINT16 bmisstime, A_UINT16 bmissbeacons);
+A_STATUS wmi_associnfo_cmd(struct wmi_t *wmip, A_UINT8 ieType,
+                           A_UINT8 ieLen, A_UINT8 *ieInfo);
+A_STATUS wmi_powermode_cmd(struct wmi_t *wmip, A_UINT8 powerMode);
+A_STATUS wmi_ibsspmcaps_cmd(struct wmi_t *wmip, A_UINT8 pmEnable, A_UINT8 ttl,
+                            A_UINT16 atim_windows, A_UINT16 timeout_value);
+A_STATUS wmi_pmparams_cmd(struct wmi_t *wmip, A_UINT16 idlePeriod,
+                           A_UINT16 psPollNum, A_UINT16 dtimPolicy);
+A_STATUS wmi_disctimeout_cmd(struct wmi_t *wmip, A_UINT8 timeout);
+A_STATUS wmi_sync_cmd(struct wmi_t *wmip, A_UINT8 syncNumber);
+A_STATUS wmi_create_pstream_cmd(struct wmi_t *wmip, WMI_CREATE_PSTREAM_CMD *pstream);
+A_STATUS wmi_delete_pstream_cmd(struct wmi_t *wmip, A_UINT8 trafficClass, A_UINT8 streamID);
+A_STATUS wmi_set_bitrate_cmd(struct wmi_t *wmip, A_INT32 rate);
+A_STATUS wmi_get_bitrate_cmd(struct wmi_t *wmip);
+A_INT8   wmi_validate_bitrate(struct wmi_t *wmip, A_INT32 rate);
+A_STATUS wmi_get_regDomain_cmd(struct wmi_t *wmip);
+A_STATUS wmi_get_channelList_cmd(struct wmi_t *wmip);
+A_STATUS wmi_set_channelParams_cmd(struct wmi_t *wmip, A_UINT8 scanParam,
+                                   WMI_PHY_MODE mode, A_INT8 numChan,
+                                   A_UINT16 *channelList);
+
+A_STATUS wmi_set_snr_threshold_params(struct wmi_t *wmip,
+                                       WMI_SNR_THRESHOLD_PARAMS_CMD *snrCmd);
+A_STATUS wmi_set_rssi_threshold_params(struct wmi_t *wmip,
+                                        WMI_RSSI_THRESHOLD_PARAMS_CMD *rssiCmd);
+A_STATUS wmi_clr_rssi_snr(struct wmi_t *wmip);
+A_STATUS wmi_set_lq_threshold_params(struct wmi_t *wmip,
+                                      WMI_LQ_THRESHOLD_PARAMS_CMD *lqCmd);
+A_STATUS wmi_set_rts_cmd(struct wmi_t *wmip, A_UINT16 threshold);
+A_STATUS wmi_set_lpreamble_cmd(struct wmi_t *wmip, A_UINT8 status);
+
+A_STATUS wmi_set_error_report_bitmask(struct wmi_t *wmip, A_UINT32 bitmask);
+
+A_STATUS wmi_get_challenge_resp_cmd(struct wmi_t *wmip, A_UINT32 cookie,
+                                    A_UINT32 source);
+A_STATUS wmi_config_debug_module_cmd(struct wmi_t *wmip, A_UINT16 mmask,
+                                     A_UINT16 tsr, A_BOOL rep, A_UINT16 size,
+                                     A_UINT32 valid);
+A_STATUS wmi_get_stats_cmd(struct wmi_t *wmip);
+A_STATUS wmi_addKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex,
+                        CRYPTO_TYPE keyType, A_UINT8 keyUsage,
+                        A_UINT8 keyLength,A_UINT8 *keyRSC,
+                        A_UINT8 *keyMaterial, A_UINT8 key_op_ctrl,
+                        WMI_SYNC_FLAG sync_flag);
+A_STATUS wmi_add_krk_cmd(struct wmi_t *wmip, A_UINT8 *krk);
+A_STATUS wmi_delete_krk_cmd(struct wmi_t *wmip);
+A_STATUS wmi_deleteKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex);
+A_STATUS wmi_set_akmp_params_cmd(struct wmi_t *wmip,
+                                 WMI_SET_AKMP_PARAMS_CMD *akmpParams);
+A_STATUS wmi_get_pmkid_list_cmd(struct wmi_t *wmip);
+A_STATUS wmi_set_pmkid_list_cmd(struct wmi_t *wmip,
+                                WMI_SET_PMKID_LIST_CMD *pmkInfo);
+A_STATUS wmi_set_txPwr_cmd(struct wmi_t *wmip, A_UINT8 dbM);
+A_STATUS wmi_get_txPwr_cmd(struct wmi_t *wmip);
+A_STATUS wmi_switch_radio(struct wmi_t *wmip, A_UINT8 on);
+A_STATUS wmi_addBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex, A_UINT8 *bssid);
+A_STATUS wmi_deleteBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex);
+A_STATUS wmi_set_tkip_countermeasures_cmd(struct wmi_t *wmip, A_BOOL en);
+A_STATUS wmi_setPmkid_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT8 *pmkId,
+                          A_BOOL set);
+A_STATUS wmi_set_access_params_cmd(struct wmi_t *wmip, A_UINT16 txop,
+                                   A_UINT8 eCWmin, A_UINT8 eCWmax,
+                                   A_UINT8 aifsn);
+A_STATUS wmi_set_retry_limits_cmd(struct wmi_t *wmip, A_UINT8 frameType,
+                                  A_UINT8 trafficClass, A_UINT8 maxRetries,
+                                  A_UINT8 enableNotify);
+
+void wmi_get_current_bssid(struct wmi_t *wmip, A_UINT8 *bssid);
+
+A_STATUS wmi_get_roam_tbl_cmd(struct wmi_t *wmip);
+A_STATUS wmi_get_roam_data_cmd(struct wmi_t *wmip, A_UINT8 roamDataType);
+A_STATUS wmi_set_roam_ctrl_cmd(struct wmi_t *wmip, WMI_SET_ROAM_CTRL_CMD *p,
+                               A_UINT8 size);
+A_STATUS wmi_set_powersave_timers_cmd(struct wmi_t *wmip,
+                            WMI_POWERSAVE_TIMERS_POLICY_CMD *pCmd,
+                            A_UINT8 size);
+
+A_STATUS wmi_set_opt_mode_cmd(struct wmi_t *wmip, A_UINT8 optMode);
+A_STATUS wmi_opt_tx_frame_cmd(struct wmi_t *wmip,
+                              A_UINT8 frmType,
+                              A_UINT8 *dstMacAddr,
+                              A_UINT8 *bssid,
+                              A_UINT16 optIEDataLen,
+                              A_UINT8 *optIEData);
+
+A_STATUS wmi_set_adhoc_bconIntvl_cmd(struct wmi_t *wmip, A_UINT16 intvl);
+A_STATUS wmi_set_voice_pkt_size_cmd(struct wmi_t *wmip, A_UINT16 voicePktSize);
+A_STATUS wmi_set_max_sp_len_cmd(struct wmi_t *wmip, A_UINT8 maxSpLen);
+A_UINT8  convert_userPriority_to_trafficClass(A_UINT8 userPriority);
+A_UINT8 wmi_get_power_mode_cmd(struct wmi_t *wmip);
+A_STATUS wmi_verify_tspec_params(WMI_CREATE_PSTREAM_CMD *pCmd, A_BOOL tspecCompliance);
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+A_STATUS wmi_test_cmd(struct wmi_t *wmip, A_UINT8 *buf, A_UINT32  len);
+#endif
+
+A_STATUS wmi_set_bt_status_cmd(struct wmi_t *wmip, A_UINT8 streamType, A_UINT8 status);
+A_STATUS wmi_set_bt_params_cmd(struct wmi_t *wmip, WMI_SET_BT_PARAMS_CMD* cmd);
+
+
+/*
+ *  This function is used to configure the fix rates mask to the target.
+ */
+A_STATUS wmi_set_fixrates_cmd(struct wmi_t *wmip, A_INT16 fixRatesMask);
+A_STATUS wmi_get_ratemask_cmd(struct wmi_t *wmip);
+
+A_STATUS wmi_set_authmode_cmd(struct wmi_t *wmip, A_UINT8 mode);
+
+A_STATUS wmi_set_reassocmode_cmd(struct wmi_t *wmip, A_UINT8 mode);
+
+A_STATUS wmi_set_wmm_cmd(struct wmi_t *wmip, WMI_WMM_STATUS status);
+A_STATUS wmi_set_wmm_txop(struct wmi_t *wmip, WMI_TXOP_CFG txEnable);
+
+A_STATUS wmi_get_keepalive_configured(struct wmi_t *wmip);
+A_UINT8 wmi_get_keepalive_cmd(struct wmi_t *wmip);
+A_STATUS wmi_set_keepalive_cmd(struct wmi_t *wmip, A_UINT8 keepaliveInterval);
+
+A_STATUS wmi_set_appie_cmd(struct wmi_t *wmip, A_UINT8 mgmtFrmType,
+                           A_UINT8 ieLen,A_UINT8 *ieInfo);
+
+A_STATUS wmi_set_halparam_cmd(struct wmi_t *wmip, A_UINT8 *cmd, A_UINT16 dataLen);
+A_INT32 wmi_get_rate(A_INT8 rateindex);
+
+/*Wake on Wireless WMI commands*/
+A_STATUS wmi_set_host_sleep_mode_cmd(struct wmi_t *wmip, WMI_SET_HOST_SLEEP_MODE_CMD *cmd);
+A_STATUS wmi_set_wow_mode_cmd(struct wmi_t *wmip, WMI_SET_WOW_MODE_CMD *cmd);
+A_STATUS wmi_get_wow_list_cmd(struct wmi_t *wmip, WMI_GET_WOW_LIST_CMD *cmd);
+A_STATUS wmi_add_wow_pattern_cmd(struct wmi_t *wmip,
+                                 WMI_ADD_WOW_PATTERN_CMD *cmd, A_UINT8* pattern, A_UINT8* mask, A_UINT8 pattern_size);
+A_STATUS wmi_del_wow_pattern_cmd(struct wmi_t *wmip,
+                                 WMI_DEL_WOW_PATTERN_CMD *cmd);
+A_STATUS wmi_set_wsc_status_cmd(struct wmi_t *wmip, A_UINT32 status);
+
+bss_t *
+wmi_find_Ssidnode (struct wmi_t *wmip, A_UCHAR *pSsid,
+				   A_UINT32 ssidLength, A_BOOL bIsWPA2);
+
+void
+wmi_node_return (struct wmi_t *wmip, bss_t *bss);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMI_API_H_ */
diff --git a/drivers/ar6000/include/wmix.h b/drivers/ar6000/include/wmix.h
new file mode 100644
index 00000000000..8f12b5e5586
--- /dev/null
+++ b/drivers/ar6000/include/wmix.h
@@ -0,0 +1,233 @@
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains extensions of the WMI protocol specified in the
+ * Wireless Module Interface (WMI).  It includes definitions of all
+ * extended commands and events.  Extensions include useful commands
+ * that are not directly related to wireless activities.  They may
+ * be hardware-specific, and they might not be supported on all
+ * implementations.
+ *
+ * Extended WMIX commands are encapsulated in a WMI message with
+ * cmd=WMI_EXTENSION_CMD.
+ *
+ */
+
+#ifndef _WMIX_H_
+#define _WMIX_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef ATH_TARGET
+#include "athstartpack.h"
+#endif
+
+#include "dbglog.h"
+
+/*
+ * Extended WMI commands are those that are needed during wireless
+ * operation, but which are not really wireless commands.  This allows,
+ * for instance, platform-specific commands.  Extended WMI commands are
+ * embedded in a WMI command message with WMI_COMMAND_ID=WMI_EXTENSION_CMDID.
+ * Extended WMI events are similarly embedded in a WMI event message with
+ * WMI_EVENT_ID=WMI_EXTENSION_EVENTID.
+ */
+typedef PREPACK struct {
+    A_UINT32    commandId;
+} POSTPACK WMIX_CMD_HDR;
+
+typedef enum {
+    WMIX_DSETOPEN_REPLY_CMDID           = 0x2001,
+    WMIX_DSETDATA_REPLY_CMDID,
+    WMIX_GPIO_OUTPUT_SET_CMDID,
+    WMIX_GPIO_INPUT_GET_CMDID,
+    WMIX_GPIO_REGISTER_SET_CMDID,
+    WMIX_GPIO_REGISTER_GET_CMDID,
+    WMIX_GPIO_INTR_ACK_CMDID,
+    WMIX_HB_CHALLENGE_RESP_CMDID,
+    WMIX_DBGLOG_CFG_MODULE_CMDID,
+} WMIX_COMMAND_ID;
+
+typedef enum {
+    WMIX_DSETOPENREQ_EVENTID            = 0x3001,
+    WMIX_DSETCLOSE_EVENTID,
+    WMIX_DSETDATAREQ_EVENTID,
+    WMIX_GPIO_INTR_EVENTID,
+    WMIX_GPIO_DATA_EVENTID,
+    WMIX_GPIO_ACK_EVENTID,
+    WMIX_HB_CHALLENGE_RESP_EVENTID,
+    WMIX_DBGLOG_EVENTID,
+} WMIX_EVENT_ID;
+
+/*
+ * =============DataSet support=================
+ */
+
+/*
+ * WMIX_DSETOPENREQ_EVENTID
+ * DataSet Open Request Event
+ */
+typedef PREPACK struct {
+    A_UINT32 dset_id;
+    A_UINT32 targ_dset_handle;  /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_fn;     /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_arg;    /* echo'ed, not used by Host, */
+} POSTPACK WMIX_DSETOPENREQ_EVENT;
+
+/*
+ * WMIX_DSETCLOSE_EVENTID
+ * DataSet Close Event
+ */
+typedef PREPACK struct {
+    A_UINT32 access_cookie;
+} POSTPACK WMIX_DSETCLOSE_EVENT;
+
+/*
+ * WMIX_DSETDATAREQ_EVENTID
+ * DataSet Data Request Event
+ */
+typedef PREPACK struct {
+    A_UINT32 access_cookie;
+    A_UINT32 offset;
+    A_UINT32 length;
+    A_UINT32 targ_buf;         /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_fn;    /* echo'ed, not used by Host, */
+    A_UINT32 targ_reply_arg;   /* echo'ed, not used by Host, */
+} POSTPACK WMIX_DSETDATAREQ_EVENT;
+
+typedef PREPACK struct {
+    A_UINT32              status;
+    A_UINT32              targ_dset_handle;
+    A_UINT32              targ_reply_fn;
+    A_UINT32              targ_reply_arg;
+    A_UINT32              access_cookie;
+    A_UINT32              size;
+    A_UINT32              version;
+} POSTPACK WMIX_DSETOPEN_REPLY_CMD;
+
+typedef PREPACK struct {
+    A_UINT32              status;
+    A_UINT32              targ_buf;
+    A_UINT32              targ_reply_fn;
+    A_UINT32              targ_reply_arg;
+    A_UINT32              length;
+    A_UINT8               buf[1];
+} POSTPACK WMIX_DSETDATA_REPLY_CMD;
+
+
+/*
+ * =============GPIO support=================
+ * All masks are 18-bit masks with bit N operating on GPIO pin N.
+ */
+
+#include "gpio.h"
+
+/*
+ * Set GPIO pin output state.
+ * In order for output to be driven, a pin must be enabled for output.
+ * This can be done during initialization through the GPIO Configuration
+ * DataSet, or during operation with the enable_mask.
+ *
+ * If a request is made to simultaneously set/clear or set/disable or
+ * clear/disable or disable/enable, results are undefined.
+ */
+typedef PREPACK struct {
+    A_UINT32              set_mask;             /* pins to set */
+    A_UINT32              clear_mask;           /* pins to clear */
+    A_UINT32              enable_mask;          /* pins to enable for output */
+    A_UINT32              disable_mask;         /* pins to disable/tristate */
+} POSTPACK WMIX_GPIO_OUTPUT_SET_CMD;
+
+/*
+ * Set a GPIO register.  For debug/exceptional cases.
+ * Values for gpioreg_id are GPIO_REGISTER_IDs, defined in a
+ * platform-dependent header.
+ */
+typedef PREPACK struct {
+    A_UINT32              gpioreg_id;           /* GPIO register ID */
+    A_UINT32              value;                /* value to write */
+} POSTPACK WMIX_GPIO_REGISTER_SET_CMD;
+
+/* Get a GPIO register.  For debug/exceptional cases. */
+typedef PREPACK struct {
+    A_UINT32              gpioreg_id;           /* GPIO register to read */
+} POSTPACK WMIX_GPIO_REGISTER_GET_CMD;
+
+/*
+ * Host acknowledges and re-arms GPIO interrupts.  A single
+ * message should be used to acknowledge all interrupts that
+ * were delivered in an earlier WMIX_GPIO_INTR_EVENT message.
+ */
+typedef PREPACK struct {
+    A_UINT32              ack_mask;             /* interrupts to acknowledge */
+} POSTPACK WMIX_GPIO_INTR_ACK_CMD;
+
+/*
+ * Target informs Host of GPIO interrupts that have ocurred since the
+ * last WMIX_GIPO_INTR_ACK_CMD was received.  Additional information --
+ * the current GPIO input values is provided -- in order to support
+ * use of a GPIO interrupt as a Data Valid signal for other GPIO pins.
+ */
+typedef PREPACK struct {
+    A_UINT32              intr_mask;            /* pending GPIO interrupts */
+    A_UINT32              input_values;         /* recent GPIO input values */
+} POSTPACK WMIX_GPIO_INTR_EVENT;
+
+/*
+ * Target responds to Host's earlier WMIX_GPIO_INPUT_GET_CMDID request
+ * using a GPIO_DATA_EVENT with
+ *   value set to the mask of GPIO pin inputs and
+ *   reg_id set to GPIO_ID_NONE
+ *
+ *
+ * Target responds to Hosts's earlier WMIX_GPIO_REGISTER_GET_CMDID request
+ * using a GPIO_DATA_EVENT with
+ *   value set to the value of the requested register and
+ *   reg_id identifying the register (reflects the original request)
+ * NB: reg_id supports the future possibility of unsolicited
+ * WMIX_GPIO_DATA_EVENTs (for polling GPIO input), and it may
+ * simplify Host GPIO support.
+ */
+typedef PREPACK struct {
+    A_UINT32              value;
+    A_UINT32              reg_id;
+} POSTPACK WMIX_GPIO_DATA_EVENT;
+
+/*
+ * =============Error Detection support=================
+ */
+
+/*
+ * WMIX_HB_CHALLENGE_RESP_CMDID
+ * Heartbeat Challenge Response command
+ */
+typedef PREPACK struct {
+    A_UINT32              cookie;
+    A_UINT32              source;
+} POSTPACK WMIX_HB_CHALLENGE_RESP_CMD;
+
+/*
+ * WMIX_HB_CHALLENGE_RESP_EVENTID
+ * Heartbeat Challenge Response Event
+ */
+#define WMIX_HB_CHALLENGE_RESP_EVENT WMIX_HB_CHALLENGE_RESP_CMD
+
+typedef PREPACK struct {
+    struct dbglog_config_s config;
+} POSTPACK WMIX_DBGLOG_CFG_MODULE_CMD;
+
+#ifndef ATH_TARGET
+#include "athendpack.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMIX_H_ */
diff --git a/drivers/ar6000/miscdrv/common_drv.c b/drivers/ar6000/miscdrv/common_drv.c
new file mode 100644
index 00000000000..4f127346665
--- /dev/null
+++ b/drivers/ar6000/miscdrv/common_drv.c
@@ -0,0 +1,467 @@
+
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "AR6Khwreg.h"
+#include "targaddrs.h"
+#include "a_osapi.h"
+#include "hif.h"
+#include "htc_api.h"
+#include "bmi.h"
+#include "bmi_msg.h"
+#include "common_drv.h"
+#include "a_debug.h"
+#include "targaddrs.h"
+
+#define HOST_INTEREST_ITEM_ADDRESS(target, item)    \
+(((TargetType) == TARGET_TYPE_AR6001) ?     \
+   AR6001_HOST_INTEREST_ITEM_ADDRESS(item) :    \
+   AR6002_HOST_INTEREST_ITEM_ADDRESS(item))
+
+
+/* Compile the 4BYTE version of the window register setup routine,
+ * This mitigates host interconnect issues with non-4byte aligned bus requests, some
+ * interconnects use bus adapters that impose strict limitations.
+ * Since diag window access is not intended for performance critical operations, the 4byte mode should
+ * be satisfactory even though it generates 4X the bus activity. */
+
+#ifdef USE_4BYTE_REGISTER_ACCESS
+
+    /* set the window address register (using 4-byte register access ). */
+A_STATUS ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, A_UINT32 RegisterAddr, A_UINT32 Address)
+{
+    A_STATUS status;
+    A_UINT8 addrValue[4];
+    int i;
+
+        /* write bytes 1,2,3 of the register to set the upper address bytes, the LSB is written
+         * last to initiate the access cycle */
+
+    for (i = 1; i <= 3; i++) {
+            /* fill the buffer with the address byte value we want to hit 4 times*/
+        addrValue[0] = ((A_UINT8 *)&Address)[i];
+        addrValue[1] = addrValue[0];
+        addrValue[2] = addrValue[0];
+        addrValue[3] = addrValue[0];
+
+            /* hit each byte of the register address with a 4-byte write operation to the same address,
+             * this is a harmless operation */
+        status = HIFReadWrite(hifDevice,
+                              RegisterAddr+i,
+                              addrValue,
+                              4,
+                              HIF_WR_SYNC_BYTE_FIX,
+                              NULL);
+        if (status != A_OK) {
+            break;
+        }
+    }
+
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n",
+             RegisterAddr, Address));
+        return status;
+    }
+
+        /* write the address register again, this time write the whole 4-byte value.
+         * The effect here is that the LSB write causes the cycle to start, the extra
+         * 3 byte write to bytes 1,2,3 has no effect since we are writing the same values again */
+    status = HIFReadWrite(hifDevice,
+                          RegisterAddr,
+                          (A_UCHAR *)(&Address),
+                          4,
+                          HIF_WR_SYNC_BYTE_INC,
+                          NULL);
+
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n",
+            RegisterAddr, Address));
+        return status;
+    }
+
+    return A_OK;
+
+
+
+}
+
+
+#else
+
+    /* set the window address register */
+A_STATUS ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, A_UINT32 RegisterAddr, A_UINT32 Address)
+{
+    A_STATUS status;
+
+        /* write bytes 1,2,3 of the register to set the upper address bytes, the LSB is written
+         * last to initiate the access cycle */
+    status = HIFReadWrite(hifDevice,
+                          RegisterAddr+1,  /* write upper 3 bytes */
+                          ((A_UCHAR *)(&Address))+1,
+                          sizeof(A_UINT32)-1,
+                          HIF_WR_SYNC_BYTE_INC,
+                          NULL);
+
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n",
+             RegisterAddr, Address));
+        return status;
+    }
+
+        /* write the LSB of the register, this initiates the operation */
+    status = HIFReadWrite(hifDevice,
+                          RegisterAddr,
+                          (A_UCHAR *)(&Address),
+                          sizeof(A_UINT8),
+                          HIF_WR_SYNC_BYTE_INC,
+                          NULL);
+
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n",
+            RegisterAddr, Address));
+        return status;
+    }
+
+    return A_OK;
+}
+
+#endif
+
+/*
+ * Read from the AR6000 through its diagnostic window.
+ * No cooperation from the Target is required for this.
+ */
+A_STATUS
+ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data)
+{
+    A_STATUS status;
+
+        /* set window register to start read cycle */
+    status = ar6000_SetAddressWindowRegister(hifDevice,
+                                             WINDOW_READ_ADDR_ADDRESS,
+                                             *address);
+
+    if (status != A_OK) {
+        return status;
+    }
+
+        /* read the data */
+    status = HIFReadWrite(hifDevice,
+                          WINDOW_DATA_ADDRESS,
+                          (A_UCHAR *)data,
+                          sizeof(A_UINT32),
+                          HIF_RD_SYNC_BYTE_INC,
+                          NULL);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot read from WINDOW_DATA_ADDRESS\n"));
+        return status;
+    }
+
+    return status;
+}
+
+
+/*
+ * Write to the AR6000 through its diagnostic window.
+ * No cooperation from the Target is required for this.
+ */
+A_STATUS
+ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data)
+{
+    A_STATUS status;
+
+        /* set write data */
+    status = HIFReadWrite(hifDevice,
+                          WINDOW_DATA_ADDRESS,
+                          (A_UCHAR *)data,
+                          sizeof(A_UINT32),
+                          HIF_WR_SYNC_BYTE_INC,
+                          NULL);
+    if (status != A_OK) {
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to WINDOW_DATA_ADDRESS\n", *data));
+        return status;
+    }
+
+        /* set window register, which starts the write cycle */
+    return ar6000_SetAddressWindowRegister(hifDevice,
+                                           WINDOW_WRITE_ADDR_ADDRESS,
+                                           *address);
+}
+
+A_STATUS
+ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
+                    A_UCHAR *data, A_UINT32 length)
+{
+    A_UINT32 count;
+    A_STATUS status = A_OK;
+
+    for (count = 0; count < length; count += 4, address += 4) {
+        if ((status = ar6000_ReadRegDiag(hifDevice, &address,
+                                         (A_UINT32 *)&data[count])) != A_OK)
+        {
+            break;
+        }
+    }
+
+    return status;
+}
+
+A_STATUS
+ar6000_WriteDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
+                     A_UCHAR *data, A_UINT32 length)
+{
+    A_UINT32 count;
+    A_STATUS status = A_OK;
+
+    for (count = 0; count < length; count += 4, address += 4) {
+        if ((status = ar6000_WriteRegDiag(hifDevice, &address,
+                                          (A_UINT32 *)&data[count])) != A_OK)
+        {
+            break;
+        }
+    }
+
+    return status;
+}
+
+A_STATUS
+ar6000_reset_device_skipflash(HIF_DEVICE *hifDevice)
+{
+    int i;
+    struct forceROM_s {
+        A_UINT32 addr;
+        A_UINT32 data;
+    };
+    struct forceROM_s *ForceROM;
+    int szForceROM;
+    A_UINT32 instruction;
+
+    static struct forceROM_s ForceROM_REV2[] = {
+        /* NB: This works for old REV2 ROM (old). */
+        {0x00001ff0, 0x175b0027}, /* jump instruction at 0xa0001ff0 */
+        {0x00001ff4, 0x00000000}, /* nop instruction at 0xa0001ff4 */
+
+        {MC_REMAP_TARGET_ADDRESS, 0x00001ff0}, /* remap to 0xa0001ff0 */
+        {MC_REMAP_COMPARE_ADDRESS, 0x01000040},/* ...from 0xbfc00040 */
+        {MC_REMAP_SIZE_ADDRESS, 0x00000000},   /* ...1 cache line */
+        {MC_REMAP_VALID_ADDRESS, 0x00000001},  /* ...remap is valid */
+
+        {LOCAL_COUNT_ADDRESS+0x10, 0}, /* clear BMI credit counter */
+
+        {RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK},
+    };
+
+    static struct forceROM_s ForceROM_NEW[] = {
+        /* NB: This works for AR6000 ROM REV3 and beyond.  */
+        {LOCAL_SCRATCH_ADDRESS, AR6K_OPTION_IGNORE_FLASH},
+        {LOCAL_COUNT_ADDRESS+0x10, 0}, /* clear BMI credit counter */
+        {RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK},
+    };
+
+    /*
+     * Examine a semi-arbitrary instruction that's different
+     * in REV2 and other revisions.
+     * NB: If a Host port does not require simultaneous support
+     * for multiple revisions of Target ROM, this code can be elided.
+     */
+    (void)ar6000_ReadDataDiag(hifDevice, 0x01000040,
+                              (A_UCHAR *)&instruction, 4);
+
+    AR_DEBUG_PRINTF(ATH_LOG_ERR, ("instruction=0x%x\n", instruction));
+
+    if (instruction == 0x3c1aa200) {
+        /* It's an old ROM */
+        ForceROM = ForceROM_REV2;
+        szForceROM = sizeof(ForceROM_REV2)/sizeof(*ForceROM);
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Using OLD method\n"));
+    } else {
+        ForceROM = ForceROM_NEW;
+        szForceROM = sizeof(ForceROM_NEW)/sizeof(*ForceROM);
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Using NEW method\n"));
+    }
+
+    AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Force Target to execute from ROM....\n"));
+    for (i = 0; i < szForceROM; i++)
+    {
+        if (ar6000_WriteRegDiag(hifDevice,
+                                &ForceROM[i].addr,
+                                &ForceROM[i].data) != A_OK)
+        {
+            AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot force Target to execute ROM!\n"));
+            return A_ERROR;
+        }
+    }
+
+    msleep(50); /* delay to allow dragon to come to BMI phase  */
+    return A_OK;
+}
+
+/* reset device */
+A_STATUS ar6000_reset_device(HIF_DEVICE *hifDevice, A_UINT32 TargetType)
+{
+
+#if !defined(DWSIM)
+    A_STATUS status = A_OK;
+    A_UINT32 address;
+    A_UINT32 data;
+
+    do {
+
+        // address = RESET_CONTROL_ADDRESS;
+        data = RESET_CONTROL_COLD_RST_MASK;
+
+          /* Hardcode the address of RESET_CONTROL_ADDRESS based on the target type */
+        if (TargetType == TARGET_TYPE_AR6001) {
+            address = 0x0C000000;
+        } else {
+            if (TargetType == TARGET_TYPE_AR6002) {
+                address = 0x00004000;
+            } else {
+                A_ASSERT(0);
+            }
+        }
+
+        status = ar6000_WriteRegDiag(hifDevice, &address, &data);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        /*
+         * Read back the RESET CAUSE register to ensure that the cold reset
+         * went through.
+         */
+        msleep(2000); /* 2 second delay to allow things to settle down */
+
+
+        // address = RESET_CAUSE_ADDRESS;
+        /* Hardcode the address of RESET_CAUSE_ADDRESS based on the target type */
+        if (TargetType == TARGET_TYPE_AR6001) {
+            address = 0x0C0000CC;
+        } else {
+            if (TargetType == TARGET_TYPE_AR6002) {
+                address = 0x000040C0;
+            } else {
+                A_ASSERT(0);
+            }
+        }
+
+        data = 0;
+        status = ar6000_ReadRegDiag(hifDevice, &address, &data);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Reset Cause readback: 0x%X \n",data));
+        data &= RESET_CAUSE_LAST_MASK;
+        if (data != 2) {
+            AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Unable to cold reset the target \n"));
+        }
+
+    } while (FALSE);
+
+    if (A_FAILED(status)) {
+        AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Failed to reset target \n"));
+    }
+#endif
+    return A_OK;
+}
+
+#define REG_DUMP_COUNT_AR6001   38  /* WORDs, derived from AR6001_regdump.h */
+#define REG_DUMP_COUNT_AR6002   32  /* WORDs, derived from AR6002_regdump.h */
+
+
+#if REG_DUMP_COUNT_AR6001 <= REG_DUMP_COUNT_AR6002
+#define REGISTER_DUMP_LEN_MAX  REG_DUMP_COUNT_AR6002
+#else
+#define REGISTER_DUMP_LEN_MAX  REG_DUMP_COUNT_AR6001
+#endif
+
+void ar6000_dump_target_assert_info(HIF_DEVICE *hifDevice, A_UINT32 TargetType)
+{
+    A_UINT32 address;
+    A_UINT32 regDumpArea = 0;
+    A_STATUS status;
+    A_UINT32 regDumpValues[REGISTER_DUMP_LEN_MAX];
+    A_UINT32 regDumpCount = 0;
+    A_UINT32 i;
+
+    do {
+
+            /* the reg dump pointer is copied to the host interest area */
+        address = HOST_INTEREST_ITEM_ADDRESS(TargetType, hi_failure_state);
+
+        if (TargetType == TARGET_TYPE_AR6001) {
+                /* for AR6001, this is a fixed location because the ptr is actually stuck in cache,
+                 * this may be fixed in later firmware versions */
+            address = 0x18a0;
+            regDumpCount = REG_DUMP_COUNT_AR6001;
+
+        } else  if (TargetType == TARGET_TYPE_AR6002) {
+
+            regDumpCount = REG_DUMP_COUNT_AR6002;
+
+        } else {
+            A_ASSERT(0);
+        }
+
+            /* read RAM location through diagnostic window */
+        status = ar6000_ReadRegDiag(hifDevice, &address, &regDumpArea);
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Failed to get ptr to register dump area \n"));
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Location of register dump data: 0x%X \n",regDumpArea));
+
+        if (regDumpArea == 0) {
+                /* no reg dump */
+            break;
+        }
+
+        if (TargetType == TARGET_TYPE_AR6001) {
+            regDumpArea &= 0x0FFFFFFF;  /* convert to physical address in target memory */
+        }
+
+            /* fetch register dump data */
+        status = ar6000_ReadDataDiag(hifDevice,
+                                     regDumpArea,
+                                     (A_UCHAR *)&regDumpValues[0],
+                                     regDumpCount * (sizeof(A_UINT32)));
+
+        if (A_FAILED(status)) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Failed to get register dump \n"));
+            break;
+        }
+
+        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Register Dump: \n"));
+
+        for (i = 0; i < regDumpCount; i++) {
+            AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" %d :  0x%8.8X \n",i, regDumpValues[i]));
+        }
+
+    } while (FALSE);
+
+}
+
diff --git a/drivers/ar6000/miscdrv/credit_dist.c b/drivers/ar6000/miscdrv/credit_dist.c
new file mode 100644
index 00000000000..8d37d627203
--- /dev/null
+++ b/drivers/ar6000/miscdrv/credit_dist.c
@@ -0,0 +1,346 @@
+
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "htc_api.h"
+#include "common_drv.h"
+
+/********* CREDIT DISTRIBUTION FUNCTIONS ******************************************/
+
+#define NO_VO_SERVICE 1 /* currently WMI only uses 3 data streams, so we leave VO service inactive */
+
+#ifdef NO_VO_SERVICE
+#define DATA_SVCS_USED 3
+#else
+#define DATA_SVCS_USED 4
+#endif
+
+static void RedistributeCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+                                HTC_ENDPOINT_CREDIT_DIST *pEPDistList);
+
+static void SeekCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+                        HTC_ENDPOINT_CREDIT_DIST *pEPDistList);
+
+/* reduce an ep's credits back to a set limit */
+static INLINE void ReduceCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+                                HTC_ENDPOINT_CREDIT_DIST  *pEpDist,
+                                int                       Limit)
+{
+    int credits;
+
+        /* set the new limit */
+    pEpDist->TxCreditsAssigned = Limit;
+
+    if (pEpDist->TxCredits <= Limit) {
+        return;
+    }
+
+        /* figure out how much to take away */
+    credits = pEpDist->TxCredits - Limit;
+        /* take them away */
+    pEpDist->TxCredits -= credits;
+    pCredInfo->CurrentFreeCredits += credits;
+}
+
+/* give an endpoint some credits from the free credit pool */
+#define GiveCredits(pCredInfo,pEpDist,credits)      \
+{                                                   \
+    (pEpDist)->TxCredits += (credits);              \
+    (pEpDist)->TxCreditsAssigned += (credits);      \
+    (pCredInfo)->CurrentFreeCredits -= (credits);   \
+}
+
+
+/* default credit init callback.
+ * This function is called in the context of HTCStart() to setup initial (application-specific)
+ * credit distributions */
+static void ar6000_credit_init(void                     *Context,
+                               HTC_ENDPOINT_CREDIT_DIST *pEPList,
+                               int                      TotalCredits)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+    int                      count;
+    COMMON_CREDIT_STATE_INFO *pCredInfo = (COMMON_CREDIT_STATE_INFO *)Context;
+
+    pCredInfo->CurrentFreeCredits = TotalCredits;
+    pCredInfo->TotalAvailableCredits = TotalCredits;
+
+    pCurEpDist = pEPList;
+
+        /* run through the list and initialize */
+    while (pCurEpDist != NULL) {
+
+            /* set minimums for each endpoint */
+        pCurEpDist->TxCreditsMin = pCurEpDist->TxCreditsPerMaxMsg;
+
+        if (pCurEpDist->ServiceID == WMI_CONTROL_SVC) {
+                /* give control service some credits */
+            GiveCredits(pCredInfo,pCurEpDist,pCurEpDist->TxCreditsMin);
+                /* control service is always marked active, it never goes inactive EVER */
+            SET_EP_ACTIVE(pCurEpDist);
+        } else if (pCurEpDist->ServiceID == WMI_DATA_BK_SVC) {
+                /* this is the lowest priority data endpoint, save this off for easy access */
+            pCredInfo->pLowestPriEpDist = pCurEpDist;
+        }
+
+        /* Streams have to be created (explicit | implicit)for all kinds
+         * of traffic. BE endpoints are also inactive in the beginning.
+         * When BE traffic starts it creates implicit streams that
+         * redistributes credits.
+         */
+
+        /* note, all other endpoints have minimums set but are initially given NO credits.
+         * Credits will be distributed as traffic activity demands */
+        pCurEpDist = pCurEpDist->pNext;
+    }
+
+    if (pCredInfo->CurrentFreeCredits <= 0) {
+        AR_DEBUG_PRINTF(ATH_LOG_INF, ("Not enough credits (%d) to do credit distributions \n", TotalCredits));
+        A_ASSERT(FALSE);
+        return;
+    }
+
+        /* reset list */
+    pCurEpDist = pEPList;
+        /* now run through the list and set max operating credit limits for everyone */
+    while (pCurEpDist != NULL) {
+        if (pCurEpDist->ServiceID == WMI_CONTROL_SVC) {
+                /* control service max is just 1 max message */
+            pCurEpDist->TxCreditsNorm = pCurEpDist->TxCreditsPerMaxMsg;
+        } else {
+                /* for the remaining data endpoints, we assume that each TxCreditsPerMaxMsg are
+                 * the same.
+                 * We use a simple calculation here, we take the remaining credits and
+                 * determine how many max messages this can cover and then set each endpoint's
+                 * normal value equal to half this amount.
+                 * */
+            count = (pCredInfo->CurrentFreeCredits/pCurEpDist->TxCreditsPerMaxMsg) * pCurEpDist->TxCreditsPerMaxMsg;
+            count = count >> 1;
+            count = max(count,pCurEpDist->TxCreditsPerMaxMsg);
+                /* set normal */
+            pCurEpDist->TxCreditsNorm = count;
+
+        }
+        pCurEpDist = pCurEpDist->pNext;
+    }
+
+}
+
+
+/* default credit distribution callback
+ * This callback is invoked whenever endpoints require credit distributions.
+ * A lock is held while this function is invoked, this function shall NOT block.
+ * The pEPDistList is a list of distribution structures in prioritized order as
+ * defined by the call to the HTCSetCreditDistribution() api.
+ *
+ */
+static void ar6000_credit_distribute(void                     *Context,
+                                     HTC_ENDPOINT_CREDIT_DIST *pEPDistList,
+                                     HTC_CREDIT_DIST_REASON   Reason)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+    COMMON_CREDIT_STATE_INFO *pCredInfo = (COMMON_CREDIT_STATE_INFO *)Context;
+
+    switch (Reason) {
+        case HTC_CREDIT_DIST_SEND_COMPLETE :
+            pCurEpDist = pEPDistList;
+                /* we are given the start of the endpoint distribution list.
+                 * There may be one or more endpoints to service.
+                 * Run through the list and distribute credits */
+            while (pCurEpDist != NULL) {
+
+                if (pCurEpDist->TxCreditsToDist > 0) {
+                        /* return the credits back to the endpoint */
+                    pCurEpDist->TxCredits += pCurEpDist->TxCreditsToDist;
+                        /* always zero out when we are done */
+                    pCurEpDist->TxCreditsToDist = 0;
+
+                    if (pCurEpDist->TxCredits > pCurEpDist->TxCreditsAssigned) {
+                            /* reduce to the assigned limit, previous credit reductions
+                             * could have caused the limit to change */
+                        ReduceCredits(pCredInfo, pCurEpDist, pCurEpDist->TxCreditsAssigned);
+                    }
+
+                    if (pCurEpDist->TxCredits > pCurEpDist->TxCreditsNorm) {
+                            /* oversubscribed endpoints need to reduce back to normal */
+                        ReduceCredits(pCredInfo, pCurEpDist, pCurEpDist->TxCreditsNorm);
+                    }
+                }
+
+                pCurEpDist = pCurEpDist->pNext;
+            }
+
+            A_ASSERT(pCredInfo->CurrentFreeCredits <= pCredInfo->TotalAvailableCredits);
+
+            break;
+
+        case HTC_CREDIT_DIST_ACTIVITY_CHANGE :
+            RedistributeCredits(pCredInfo,pEPDistList);
+            break;
+        case HTC_CREDIT_DIST_SEEK_CREDITS :
+            SeekCredits(pCredInfo,pEPDistList);
+            break;
+        case HTC_DUMP_CREDIT_STATE :
+            AR_DEBUG_PRINTF(ATH_LOG_INF, ("Credit Distribution, total : %d, free : %d\n",
+            								pCredInfo->TotalAvailableCredits, pCredInfo->CurrentFreeCredits));
+            break;
+        default:
+            break;
+
+    }
+
+}
+
+/* redistribute credits based on activity change */
+static void RedistributeCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+                                HTC_ENDPOINT_CREDIT_DIST *pEPDistList)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist = pEPDistList;
+
+        /* walk through the list and remove credits from inactive endpoints */
+    while (pCurEpDist != NULL) {
+
+        if (pCurEpDist->ServiceID != WMI_CONTROL_SVC) {
+            if (!IS_EP_ACTIVE(pCurEpDist)) {
+                    /* EP is inactive, reduce credits back to zero */
+                ReduceCredits(pCredInfo, pCurEpDist, 0);
+            }
+        }
+
+        /* NOTE in the active case, we do not need to do anything further,
+         * when an EP goes active and needs credits, HTC will call into
+         * our distribution function using a reason code of HTC_CREDIT_DIST_SEEK_CREDITS  */
+
+        pCurEpDist = pCurEpDist->pNext;
+    }
+
+    A_ASSERT(pCredInfo->CurrentFreeCredits <= pCredInfo->TotalAvailableCredits);
+
+}
+
+/* HTC has an endpoint that needs credits, pEPDist is the endpoint in question */
+static void SeekCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+                        HTC_ENDPOINT_CREDIT_DIST *pEPDist)
+{
+    HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+    int                      credits = 0;
+    int                      need;
+
+    do {
+
+        if (pEPDist->ServiceID == WMI_CONTROL_SVC) {
+                /* we never oversubscribe on the control service, this is not
+                 * a high performance path and the target never holds onto control
+                 * credits for too long */
+            break;
+        }
+
+        /* for all other services, we follow a simple algorithm of
+         * 1. checking the free pool for credits
+         * 2. checking lower priority endpoints for credits to take */
+
+        if (pCredInfo->CurrentFreeCredits >= 2 * pEPDist->TxCreditsSeek) {
+                /* try to give more credits than it needs */
+            credits = 2 * pEPDist->TxCreditsSeek;
+        } else {
+                /* give what we can */
+            credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek);
+        }
+
+        if (credits >= pEPDist->TxCreditsSeek) {
+                /* we found some to fullfill the seek request */
+            break;
+        }
+
+        /* we don't have enough in the free pool, try taking away from lower priority services
+         *
+         * The rule for taking away credits:
+         *   1. Only take from lower priority endpoints
+         *   2. Only take what is allocated above the minimum (never starve an endpoint completely)
+         *   3. Only take what you need.
+         *
+         * */
+
+            /* starting at the lowest priority */
+        pCurEpDist = pCredInfo->pLowestPriEpDist;
+
+            /* work backwards until we hit the endpoint again */
+        while (pCurEpDist != pEPDist) {
+                /* calculate how many we need so far */
+            need = pEPDist->TxCreditsSeek - pCredInfo->CurrentFreeCredits;
+
+            if ((pCurEpDist->TxCreditsAssigned - need) > pCurEpDist->TxCreditsMin) {
+                    /* the current one has been allocated more than it's minimum and it
+                     * has enough credits assigned above it's minimum to fullfill our need
+                     * try to take away just enough to fullfill our need */
+                ReduceCredits(pCredInfo,
+                              pCurEpDist,
+                              pCurEpDist->TxCreditsAssigned - need);
+
+                if (pCredInfo->CurrentFreeCredits >= pEPDist->TxCreditsSeek) {
+                        /* we have enough */
+                    break;
+                }
+            }
+
+            pCurEpDist = pCurEpDist->pPrev;
+        }
+
+            /* return what we can get */
+        credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek);
+
+    } while (FALSE);
+
+        /* did we find some credits? */
+    if (credits) {
+            /* give what we can */
+        GiveCredits(pCredInfo, pEPDist, credits);
+    }
+
+}
+
+/* initialize and setup credit distribution */
+A_STATUS ar6000_setup_credit_dist(HTC_HANDLE HTCHandle, COMMON_CREDIT_STATE_INFO *pCredInfo)
+{
+    HTC_SERVICE_ID servicepriority[5];
+
+    A_MEMZERO(pCredInfo,sizeof(COMMON_CREDIT_STATE_INFO));
+
+    servicepriority[0] = WMI_CONTROL_SVC;  /* highest */
+    servicepriority[1] = WMI_DATA_VO_SVC;
+    servicepriority[2] = WMI_DATA_VI_SVC;
+    servicepriority[3] = WMI_DATA_BE_SVC;
+    servicepriority[4] = WMI_DATA_BK_SVC; /* lowest */
+
+        /* set callbacks and priority list */
+    HTCSetCreditDistribution(HTCHandle,
+                             pCredInfo,
+                             ar6000_credit_distribute,
+                             ar6000_credit_init,
+                             servicepriority,
+                             5);
+
+    return A_OK;
+}
+
diff --git a/drivers/ar6000/wlan/wlan_node.c b/drivers/ar6000/wlan/wlan_node.c
new file mode 100644
index 00000000000..b12484597f8
--- /dev/null
+++ b/drivers/ar6000/wlan/wlan_node.c
@@ -0,0 +1,371 @@
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wlan/src/wlan_node.c#1 $
+ */
+/*
+ * IEEE 802.11 node handling support.
+ */
+#include <a_config.h>
+#include <athdefs.h>
+#include <a_types.h>
+#include <a_osapi.h>
+#include <a_debug.h>
+#include <ieee80211.h>
+#include <wlan_api.h>
+#include <ieee80211_node.h>
+#include <htc_api.h>
+#include <wmi.h>
+#include <wmi_api.h>
+
+static void wlan_node_timeout(A_ATH_TIMER arg);
+static bss_t * _ieee80211_find_node(struct ieee80211_node_table *nt,
+                                    const A_UINT8 *macaddr);
+
+bss_t *
+wlan_node_alloc(struct ieee80211_node_table *nt, int wh_size)
+{
+    bss_t *ni;
+
+    ni = A_MALLOC_NOWAIT(sizeof(bss_t));
+
+    if (ni != NULL) {
+        ni->ni_buf = A_MALLOC_NOWAIT(wh_size);
+        if (ni->ni_buf == NULL) {
+            A_FREE(ni);
+            ni = NULL;
+            return ni;
+        }
+    } else {
+        return ni;
+    }
+
+    /* Make sure our lists are clean */
+    ni->ni_list_next = NULL;
+    ni->ni_list_prev = NULL;
+    ni->ni_hash_next = NULL;
+    ni->ni_hash_prev = NULL;
+
+    //
+    // ni_scangen never initialized before and during suspend/resume of winmobile, customer (LG/SEMCO) identified
+    // that some junk has been stored in this, due to this scan list didn't properly updated
+    //
+    ni->ni_scangen	 = 0;
+
+    return ni;
+}
+
+void
+wlan_node_free(bss_t *ni)
+{
+    if (ni->ni_buf != NULL) {
+        A_FREE(ni->ni_buf);
+    }
+    A_FREE(ni);
+}
+
+void
+wlan_setup_node(struct ieee80211_node_table *nt, bss_t *ni,
+                const A_UINT8 *macaddr)
+{
+    int hash;
+
+    A_MEMCPY(ni->ni_macaddr, macaddr, IEEE80211_ADDR_LEN);
+    hash = IEEE80211_NODE_HASH(macaddr);
+    ieee80211_node_initref(ni);     /* mark referenced */
+
+    ni->ni_tstamp = A_GET_MS(WLAN_NODE_INACT_TIMEOUT_MSEC);
+    IEEE80211_NODE_LOCK_BH(nt);
+
+    /* Insert at the end of the node list */
+    ni->ni_list_next = NULL;
+    ni->ni_list_prev = nt->nt_node_last;
+    if(nt->nt_node_last != NULL)
+    {
+        nt->nt_node_last->ni_list_next = ni;
+    }
+    nt->nt_node_last = ni;
+    if(nt->nt_node_first == NULL)
+    {
+        nt->nt_node_first = ni;
+    }
+
+    /* Insert into the hash list i.e. the bucket */
+    if((ni->ni_hash_next = nt->nt_hash[hash]) != NULL)
+    {
+        nt->nt_hash[hash]->ni_hash_prev = ni;
+    }
+    ni->ni_hash_prev = NULL;
+    nt->nt_hash[hash] = ni;
+
+    if (!nt->isTimerArmed) {
+        A_TIMEOUT_MS(&nt->nt_inact_timer, WLAN_NODE_INACT_TIMEOUT_MSEC, 0);
+        nt->isTimerArmed = TRUE;
+    }
+
+    IEEE80211_NODE_UNLOCK_BH(nt);
+}
+
+static bss_t *
+_ieee80211_find_node(struct ieee80211_node_table *nt,
+    const A_UINT8 *macaddr)
+{
+    bss_t *ni;
+    int hash;
+
+    IEEE80211_NODE_LOCK_ASSERT(nt);
+
+    hash = IEEE80211_NODE_HASH(macaddr);
+    for(ni = nt->nt_hash[hash]; ni; ni = ni->ni_hash_next) {
+        if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
+            ieee80211_node_incref(ni);  /* mark referenced */
+            return ni;
+        }
+    }
+    return NULL;
+}
+
+bss_t *
+wlan_find_node(struct ieee80211_node_table *nt, const A_UINT8 *macaddr)
+{
+    bss_t *ni;
+
+    IEEE80211_NODE_LOCK(nt);
+    ni = _ieee80211_find_node(nt, macaddr);
+    IEEE80211_NODE_UNLOCK(nt);
+    return ni;
+}
+
+/*
+ * Reclaim a node.  If this is the last reference count then
+ * do the normal free work.  Otherwise remove it from the node
+ * table and mark it gone by clearing the back-reference.
+ */
+void
+wlan_node_reclaim(struct ieee80211_node_table *nt, bss_t *ni)
+{
+    IEEE80211_NODE_LOCK(nt);
+
+    if(ni->ni_list_prev == NULL)
+    {
+        /* First in list so fix the list head */
+        nt->nt_node_first = ni->ni_list_next;
+    }
+    else
+    {
+        ni->ni_list_prev->ni_list_next = ni->ni_list_next;
+    }
+
+    if(ni->ni_list_next == NULL)
+    {
+        /* Last in list so fix list tail */
+        nt->nt_node_last = ni->ni_list_prev;
+    }
+    else
+    {
+        ni->ni_list_next->ni_list_prev = ni->ni_list_prev;
+    }
+
+    if(ni->ni_hash_prev == NULL)
+    {
+        /* First in list so fix the list head */
+        int hash;
+        hash = IEEE80211_NODE_HASH(ni->ni_macaddr);
+        nt->nt_hash[hash] = ni->ni_hash_next;
+    }
+    else
+    {
+        ni->ni_hash_prev->ni_hash_next = ni->ni_hash_next;
+    }
+
+    if(ni->ni_hash_next != NULL)
+    {
+        ni->ni_hash_next->ni_hash_prev = ni->ni_hash_prev;
+    }
+    wlan_node_free(ni);
+
+    IEEE80211_NODE_UNLOCK(nt);
+}
+
+static void
+wlan_node_dec_free(bss_t *ni)
+{
+    if (ieee80211_node_dectestref(ni)) {
+        wlan_node_free(ni);
+    }
+}
+
+void
+wlan_free_allnodes(struct ieee80211_node_table *nt)
+{
+    bss_t *ni;
+
+    while ((ni = nt->nt_node_first) != NULL) {
+        wlan_node_reclaim(nt, ni);
+    }
+}
+
+void
+wlan_iterate_nodes(struct ieee80211_node_table *nt, wlan_node_iter_func *f,
+                   void *arg)
+{
+    bss_t *ni;
+    A_UINT32 gen;
+
+    gen = ++nt->nt_scangen;
+
+    IEEE80211_NODE_LOCK(nt);
+    for (ni = nt->nt_node_first; ni; ni = ni->ni_list_next) {
+        if (ni->ni_scangen != gen) {
+            ni->ni_scangen = gen;
+            (void) ieee80211_node_incref(ni);
+            (*f)(arg, ni);
+            wlan_node_dec_free(ni);
+        }
+    }
+    IEEE80211_NODE_UNLOCK(nt);
+}
+
+/*
+ * Node table support.
+ */
+void
+wlan_node_table_init(void *wmip, struct ieee80211_node_table *nt)
+{
+    int i;
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_WLAN, ("node table = 0x%x\n", (A_UINT32)nt));
+    IEEE80211_NODE_LOCK_INIT(nt);
+
+    nt->nt_node_first = nt->nt_node_last = NULL;
+    for(i = 0; i < IEEE80211_NODE_HASHSIZE; i++)
+    {
+        nt->nt_hash[i] = NULL;
+    }
+    A_INIT_TIMER(&nt->nt_inact_timer, wlan_node_timeout, nt);
+    nt->isTimerArmed = FALSE;
+    nt->nt_wmip = wmip;
+}
+
+static void
+wlan_node_timeout(A_ATH_TIMER arg)
+{
+    struct ieee80211_node_table *nt = (struct ieee80211_node_table *)arg;
+    bss_t *bss, *nextBss;
+    A_UINT8 myBssid[IEEE80211_ADDR_LEN], reArmTimer = FALSE;
+
+    wmi_get_current_bssid(nt->nt_wmip, myBssid);
+
+    bss = nt->nt_node_first;
+    while (bss != NULL)
+    {
+        nextBss = bss->ni_list_next;
+        if (A_MEMCMP(myBssid, bss->ni_macaddr, sizeof(myBssid)) != 0)
+        {
+
+            if (bss->ni_tstamp <= A_GET_MS(0))
+            {
+               /*
+                * free up all but the current bss - if set
+                */
+                wlan_node_reclaim(nt, bss);
+            }
+            else
+            {
+                /*
+                 * Re-arm timer, only when we have a bss other than
+                 * current bss AND it is not aged-out.
+                 */
+                reArmTimer = TRUE;
+            }
+        }
+        bss = nextBss;
+    }
+
+    if(reArmTimer)
+        A_TIMEOUT_MS(&nt->nt_inact_timer, WLAN_NODE_INACT_TIMEOUT_MSEC, 0);
+
+    nt->isTimerArmed = reArmTimer;
+}
+
+void
+wlan_node_table_cleanup(struct ieee80211_node_table *nt)
+{
+    A_UNTIMEOUT(&nt->nt_inact_timer);
+    A_DELETE_TIMER(&nt->nt_inact_timer);
+    wlan_free_allnodes(nt);
+    IEEE80211_NODE_LOCK_DESTROY(nt);
+}
+
+bss_t *
+wlan_find_Ssidnode (struct ieee80211_node_table *nt, A_UCHAR *pSsid,
+					A_UINT32 ssidLength, A_BOOL bIsWPA2)
+{
+    bss_t   *ni = NULL;
+	A_UCHAR *pIESsid = NULL;
+
+    IEEE80211_NODE_LOCK (nt);
+
+    for (ni = nt->nt_node_first; ni; ni = ni->ni_list_next) {
+		pIESsid = ni->ni_cie.ie_ssid;
+		if (pIESsid[1] <= 32) {
+
+			// Step 1 : Check SSID
+			if (0x00 == memcmp (pSsid, &pIESsid[2], ssidLength)) {
+
+				// Step 2 : if SSID matches, check WPA or WPA2
+				if (TRUE == bIsWPA2 && NULL != ni->ni_cie.ie_rsn) {
+					ieee80211_node_incref (ni);  /* mark referenced */
+					IEEE80211_NODE_UNLOCK (nt);
+					return ni;
+				}
+				if (FALSE == bIsWPA2 && NULL != ni->ni_cie.ie_wpa) {
+					ieee80211_node_incref(ni);  /* mark referenced */
+					IEEE80211_NODE_UNLOCK (nt);
+					return ni;
+				}
+			}
+		}
+    }
+
+    IEEE80211_NODE_UNLOCK (nt);
+
+    return NULL;
+}
+
+void
+wlan_node_return (struct ieee80211_node_table *nt, bss_t *ni)
+{
+	IEEE80211_NODE_LOCK (nt);
+	wlan_node_dec_free (ni);
+	IEEE80211_NODE_UNLOCK (nt);
+}
diff --git a/drivers/ar6000/wlan/wlan_recv_beacon.c b/drivers/ar6000/wlan/wlan_recv_beacon.c
new file mode 100644
index 00000000000..15beabb6549
--- /dev/null
+++ b/drivers/ar6000/wlan/wlan_recv_beacon.c
@@ -0,0 +1,192 @@
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*
+ * IEEE 802.11 input handling.
+ */
+
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include <wmi.h>
+#include <ieee80211.h>
+#include <wlan_api.h>
+
+#define IEEE80211_VERIFY_LENGTH(_len, _minlen) do {         \
+    if ((_len) < (_minlen)) {                   \
+        return A_EINVAL;                         \
+    }                               \
+} while (0)
+
+#define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen) do {         \
+    if ((__elem) == NULL) {                     \
+        return A_EINVAL;                         \
+    }                               \
+    if ((__elem)[1] > (__maxlen)) {                 \
+        return A_EINVAL;                         \
+    }                               \
+} while (0)
+
+
+/* unaligned little endian access */
+#define LE_READ_2(p)                            \
+    ((A_UINT16)                            \
+     ((((A_UINT8 *)(p))[0]      ) | (((A_UINT8 *)(p))[1] <<  8)))
+
+#define LE_READ_4(p)                            \
+    ((A_UINT32)                            \
+     ((((A_UINT8 *)(p))[0]      ) | (((A_UINT8 *)(p))[1] <<  8) | \
+      (((A_UINT8 *)(p))[2] << 16) | (((A_UINT8 *)(p))[3] << 24)))
+
+
+static int __inline
+iswpaoui(const A_UINT8 *frm)
+{
+    return frm[1] > 3 && LE_READ_4(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI);
+}
+
+static int __inline
+iswmmoui(const A_UINT8 *frm)
+{
+    return frm[1] > 3 && LE_READ_4(frm+2) == ((WMM_OUI_TYPE<<24)|WMM_OUI);
+}
+
+static int __inline
+iswmmparam(const A_UINT8 *frm)
+{
+    return frm[1] > 5 && frm[6] == WMM_PARAM_OUI_SUBTYPE;
+}
+
+static int __inline
+iswmminfo(const A_UINT8 *frm)
+{
+    return frm[1] > 5 && frm[6] == WMM_INFO_OUI_SUBTYPE;
+}
+
+static int __inline
+isatherosoui(const A_UINT8 *frm)
+{
+    return frm[1] > 3 && LE_READ_4(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI);
+}
+
+static int __inline
+iswscoui(const A_UINT8 *frm)
+{
+    return frm[1] > 3 && LE_READ_4(frm+2) == ((0x04<<24)|WPA_OUI);
+}
+
+A_STATUS
+wlan_parse_beacon(A_UINT8 *buf, int framelen, struct ieee80211_common_ie *cie)
+{
+    A_UINT8 *frm, *efrm;
+
+    frm = buf;
+    efrm = (A_UINT8 *) (frm + framelen);
+
+    /*
+     * beacon/probe response frame format
+     *  [8] time stamp
+     *  [2] beacon interval
+     *  [2] capability information
+     *  [tlv] ssid
+     *  [tlv] supported rates
+     *  [tlv] country information
+     *  [tlv] parameter set (FH/DS)
+     *  [tlv] erp information
+     *  [tlv] extended supported rates
+     *  [tlv] WMM
+     *  [tlv] WPA or RSN
+     *  [tlv] Atheros Advanced Capabilities
+     */
+    IEEE80211_VERIFY_LENGTH(efrm - frm, 12);
+    A_MEMZERO(cie, sizeof(*cie));
+
+    cie->ie_tstamp = frm; frm += 8;
+    cie->ie_beaconInt = A_LE2CPU16(*(A_UINT16 *)frm);  frm += 2;
+    cie->ie_capInfo = A_LE2CPU16(*(A_UINT16 *)frm);  frm += 2;
+    cie->ie_chan = 0;
+
+    while (frm < efrm) {
+        switch (*frm) {
+        case IEEE80211_ELEMID_SSID:
+            cie->ie_ssid = frm;
+            break;
+        case IEEE80211_ELEMID_RATES:
+            cie->ie_rates = frm;
+            break;
+        case IEEE80211_ELEMID_COUNTRY:
+            cie->ie_country = frm;
+            break;
+        case IEEE80211_ELEMID_FHPARMS:
+            break;
+        case IEEE80211_ELEMID_DSPARMS:
+            cie->ie_chan = frm[2];
+            break;
+        case IEEE80211_ELEMID_TIM:
+            cie->ie_tim = frm;
+            break;
+        case IEEE80211_ELEMID_IBSSPARMS:
+            break;
+        case IEEE80211_ELEMID_XRATES:
+            cie->ie_xrates = frm;
+            break;
+        case IEEE80211_ELEMID_ERP:
+            if (frm[1] != 1) {
+                //A_PRINTF("Discarding ERP Element - Bad Len\n");
+                return A_EINVAL;
+            }
+            cie->ie_erp = frm[2];
+            break;
+        case IEEE80211_ELEMID_RSN:
+            cie->ie_rsn = frm;
+            break;
+        case IEEE80211_ELEMID_VENDOR:
+            if (iswpaoui(frm)) {
+                cie->ie_wpa = frm;
+            } else if (iswmmoui(frm)) {
+                cie->ie_wmm = frm;
+            } else if (isatherosoui(frm)) {
+                cie->ie_ath = frm;
+            } else if(iswscoui(frm)) {
+                cie->ie_wsc = frm;
+            }
+            break;
+        default:
+            break;
+        }
+        frm += frm[1] + 2;
+    }
+    IEEE80211_VERIFY_ELEMENT(cie->ie_rates, IEEE80211_RATE_MAXSIZE);
+    IEEE80211_VERIFY_ELEMENT(cie->ie_ssid, IEEE80211_NWID_LEN);
+
+    return A_OK;
+}
diff --git a/drivers/ar6000/wlan/wlan_utils.c b/drivers/ar6000/wlan/wlan_utils.c
new file mode 100644
index 00000000000..fd5aac90e61
--- /dev/null
+++ b/drivers/ar6000/wlan/wlan_utils.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This module implements frequently used wlan utilies
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wlan/src/wlan_utils.c#1 $
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include <a_config.h>
+#include <athdefs.h>
+#include <a_types.h>
+#include <a_osapi.h>
+
+/*
+ * converts ieee channel number to frequency
+ */
+A_UINT16
+wlan_ieee2freq(int chan)
+{
+    if (chan == 14) {
+        return 2484;
+    }
+    if (chan < 14) {    /* 0-13 */
+        return (2407 + (chan*5));
+    }
+    if (chan < 27) {    /* 15-26 */
+        return (2512 + ((chan-15)*20));
+    }
+    return (5000 + (chan*5));
+}
+
+/*
+ * Converts MHz frequency to IEEE channel number.
+ */
+A_UINT32
+wlan_freq2ieee(A_UINT16 freq)
+{
+    if (freq == 2484)
+        return 14;
+    if (freq < 2484)
+        return (freq - 2407) / 5;
+    if (freq < 5000)
+        return 15 + ((freq - 2512) / 20);
+    return (freq - 5000) / 5;
+}
diff --git a/drivers/ar6000/wmi/wmi.c b/drivers/ar6000/wmi/wmi.c
new file mode 100644
index 00000000000..d322cf3f522
--- /dev/null
+++ b/drivers/ar6000/wmi/wmi.c
@@ -0,0 +1,3954 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This module implements the hardware independent layer of the
+ * Wireless Module Interface (WMI) protocol.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wmi/wmi.c#3 $
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include <a_config.h>
+#include <athdefs.h>
+#include <a_types.h>
+#include <a_osapi.h>
+#include "htc.h"
+#include "htc_api.h"
+#include "wmi.h"
+#include <ieee80211.h>
+#include <ieee80211_node.h>
+#include <wlan_api.h>
+#include <wmi_api.h>
+#include "dset_api.h"
+#include "gpio_api.h"
+#include "wmi_host.h"
+#include "a_drv.h"
+#include "a_drv_api.h"
+#include "a_debug.h"
+#include "dbglog_api.h"
+
+static A_STATUS wmi_ready_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS wmi_connect_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+static A_STATUS wmi_disconnect_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                        int len);
+static A_STATUS wmi_tkip_micerr_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                        int len);
+static A_STATUS wmi_bssInfo_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+static A_STATUS wmi_opt_frame_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                       int len);
+static A_STATUS wmi_pstream_timeout_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+static A_STATUS wmi_sync_point(struct wmi_t *wmip);
+
+static A_STATUS wmi_bitrate_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+static A_STATUS wmi_ratemask_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+static A_STATUS wmi_channelList_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                         int len);
+static A_STATUS wmi_regDomain_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                       int len);
+static A_STATUS wmi_txPwr_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_neighborReport_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                             int len);
+
+static A_STATUS wmi_dset_open_req_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+#ifdef CONFIG_HOST_DSET_SUPPORT
+static A_STATUS wmi_dset_close_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_dset_data_req_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+#endif /* CONFIG_HOST_DSET_SUPPORT */
+
+
+static A_STATUS wmi_scanComplete_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                     int len);
+static A_STATUS wmi_errorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_statsEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_rssiThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_hbChallengeResp_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_reportErrorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_cac_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_roam_tbl_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                      int len);
+static A_STATUS wmi_roam_data_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                      int len);
+static A_STATUS wmi_get_wow_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+                                      int len);
+static A_STATUS
+wmi_get_pmkid_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, A_UINT32 len);
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+static A_STATUS wmi_gpio_intr_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_gpio_data_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_gpio_ack_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+static A_STATUS
+wmi_tcmd_test_report_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+#endif
+
+static A_STATUS
+wmi_txRetryErrEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS
+wmi_snrThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS
+wmi_lqThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_BOOL
+wmi_is_bitrate_index_valid(struct wmi_t *wmip, A_UINT32 rateIndex);
+
+static A_STATUS
+wmi_aplistEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS
+wmi_dbglog_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS wmi_keepalive_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+int wps_enable;
+static const A_INT32 wmi_rateTable[] = {
+    1000,
+    2000,
+    5500,
+    11000,
+    6000,
+    9000,
+    12000,
+    18000,
+    24000,
+    36000,
+    48000,
+    54000,
+    0};
+
+#define MODE_A_SUPPORT_RATE_START       4
+#define MODE_A_SUPPORT_RATE_STOP        11
+
+#define MODE_GONLY_SUPPORT_RATE_START   MODE_A_SUPPORT_RATE_START
+#define MODE_GONLY_SUPPORT_RATE_STOP    MODE_A_SUPPORT_RATE_STOP
+
+#define MODE_B_SUPPORT_RATE_START       0
+#define MODE_B_SUPPORT_RATE_STOP        3
+
+#define MODE_G_SUPPORT_RATE_START       0
+#define MODE_G_SUPPORT_RATE_STOP        11
+
+#define MAX_NUMBER_OF_SUPPORT_RATES     (MODE_G_SUPPORT_RATE_STOP + 1)
+
+/* 802.1d to AC mapping. Refer pg 57 of WMM-test-plan-v1.2 */
+const A_UINT8 up_to_ac[]= {
+                WMM_AC_BE,
+                WMM_AC_BK,
+                WMM_AC_BK,
+                WMM_AC_BE,
+                WMM_AC_VI,
+                WMM_AC_VI,
+                WMM_AC_VO,
+                WMM_AC_VO,
+            };
+
+void *
+wmi_init(void *devt)
+{
+    struct wmi_t *wmip;
+
+    wmip = A_MALLOC(sizeof(struct wmi_t));
+    if (wmip == NULL) {
+        return (NULL);
+    }
+    A_MEMZERO(wmip, sizeof(*wmip));
+    A_MUTEX_INIT(&wmip->wmi_lock);
+    wmip->wmi_devt = devt;
+    wlan_node_table_init(wmip, &wmip->wmi_scan_table);
+    wmi_qos_state_init(wmip);
+    wmip->wmi_powerMode = REC_POWER;
+    wmip->wmi_phyMode = WMI_11G_MODE;
+
+    return (wmip);
+}
+
+void
+wmi_qos_state_init(struct wmi_t *wmip)
+{
+    A_UINT8 i;
+
+    if (wmip == NULL) {
+        return;
+    }
+    LOCK_WMI(wmip);
+
+    /* Initialize QoS States */
+    wmip->wmi_numQoSStream = 0;
+
+    wmip->wmi_fatPipeExists = 0;
+
+    for (i=0; i < WMM_NUM_AC; i++) {
+        wmip->wmi_streamExistsForAC[i]=0;
+    }
+
+        /* Initialize the static Wmi stream Pri to WMM AC mappings Arrays */
+    WMI_INIT_WMISTREAM_AC_MAP(wmip);
+
+    UNLOCK_WMI(wmip);
+
+    A_WMI_SET_NUMDATAENDPTS(wmip->wmi_devt, 1);
+}
+
+void
+wmi_shutdown(struct wmi_t *wmip)
+{
+    if (wmip != NULL) {
+        wlan_node_table_cleanup(&wmip->wmi_scan_table);
+        if (A_IS_MUTEX_VALID(&wmip->wmi_lock)) {
+            A_MUTEX_DELETE(&wmip->wmi_lock);
+        }
+        A_FREE(wmip);
+    }
+}
+
+/*
+ *  performs DIX to 802.3 encapsulation for transmit packets.
+ *  uses passed in buffer.  Returns buffer or NULL if failed.
+ *  Assumes the entire DIX header is contigous and that there is
+ *  enough room in the buffer for a 802.3 mac header and LLC+SNAP headers.
+ */
+A_STATUS
+wmi_dix_2_dot3(struct wmi_t *wmip, void *osbuf)
+{
+    A_UINT8          *datap;
+    A_UINT16         typeorlen;
+    ATH_MAC_HDR      macHdr;
+    ATH_LLC_SNAP_HDR *llcHdr;
+
+    A_ASSERT(osbuf != NULL);
+
+    if (A_NETBUF_HEADROOM(osbuf) <
+        (sizeof(ATH_LLC_SNAP_HDR) + sizeof(WMI_DATA_HDR)))
+    {
+        return A_NO_MEMORY;
+    }
+
+    datap = A_NETBUF_DATA(osbuf);
+
+    typeorlen = *(A_UINT16 *)(datap + ATH_MAC_LEN + ATH_MAC_LEN);
+
+    if (!IS_ETHERTYPE(A_BE2CPU16(typeorlen))) {
+        /*
+         * packet is already in 802.3 format - return success
+         */
+        A_DPRINTF(DBG_WMI, (DBGFMT "packet already 802.3\n", DBGARG));
+        return (A_OK);
+    }
+
+    /*
+     * Save mac fields and length to be inserted later
+     */
+    A_MEMCPY(macHdr.dstMac, datap, ATH_MAC_LEN);
+    A_MEMCPY(macHdr.srcMac, datap + ATH_MAC_LEN, ATH_MAC_LEN);
+    macHdr.typeOrLen = A_CPU2BE16(A_NETBUF_LEN(osbuf) - sizeof(ATH_MAC_HDR) +
+                                  sizeof(ATH_LLC_SNAP_HDR));
+
+    /*
+     * Make room for LLC+SNAP headers
+     */
+    if (A_NETBUF_PUSH(osbuf, sizeof(ATH_LLC_SNAP_HDR)) != A_OK) {
+        return A_NO_MEMORY;
+    }
+
+    datap = A_NETBUF_DATA(osbuf);
+
+    A_MEMCPY(datap, &macHdr, sizeof (ATH_MAC_HDR));
+
+    llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(ATH_MAC_HDR));
+    llcHdr->dsap      = 0xAA;
+    llcHdr->ssap      = 0xAA;
+    llcHdr->cntl      = 0x03;
+    llcHdr->orgCode[0] = 0x0;
+    llcHdr->orgCode[1] = 0x0;
+    llcHdr->orgCode[2] = 0x0;
+    llcHdr->etherType = typeorlen;
+
+    return (A_OK);
+}
+
+/*
+ * Adds a WMI data header
+ * Assumes there is enough room in the buffer to add header.
+ */
+A_STATUS
+wmi_data_hdr_add(struct wmi_t *wmip, void *osbuf, A_UINT8 msgType)
+{
+    WMI_DATA_HDR     *dtHdr;
+
+    A_ASSERT(osbuf != NULL);
+
+    if (A_NETBUF_PUSH(osbuf, sizeof(WMI_DATA_HDR)) != A_OK) {
+        return A_NO_MEMORY;
+    }
+
+    dtHdr = (WMI_DATA_HDR *)A_NETBUF_DATA(osbuf);
+    dtHdr->info = msgType;
+    dtHdr->rssi = 0;
+
+    return (A_OK);
+}
+
+A_UINT8 wmi_implicit_create_pstream(struct wmi_t *wmip, void *osbuf, A_UINT8 dir, A_UINT8 up)
+{
+    A_UINT8         *datap;
+    A_UINT8         trafficClass = WMM_AC_BE, userPriority = up;
+    ATH_LLC_SNAP_HDR *llcHdr;
+    A_UINT16        ipType = IP_ETHERTYPE;
+    WMI_DATA_HDR     *dtHdr;
+    WMI_CREATE_PSTREAM_CMD  cmd;
+    A_BOOL           streamExists = FALSE;
+
+    A_ASSERT(osbuf != NULL);
+
+    datap = A_NETBUF_DATA(osbuf);
+
+    if (up == UNDEFINED_PRI) {
+    llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(WMI_DATA_HDR) +
+                                  sizeof(ATH_MAC_HDR));
+
+        if (llcHdr->etherType == A_CPU2BE16(ipType)) {
+        /* Extract the endpoint info from the TOS field in the IP header */
+        userPriority = A_WMI_IPTOS_TO_USERPRIORITY(((A_UINT8 *)llcHdr) + sizeof(ATH_LLC_SNAP_HDR));
+        }
+    }
+
+    if (userPriority < MAX_NUM_PRI) {
+        trafficClass = convert_userPriority_to_trafficClass(userPriority);
+    }
+
+    dtHdr = (WMI_DATA_HDR *)datap;
+    if(dir==UPLINK_TRAFFIC)
+        dtHdr->info |= (userPriority & WMI_DATA_HDR_UP_MASK) << WMI_DATA_HDR_UP_SHIFT;  /* lower 3-bits are 802.1d priority */
+
+    LOCK_WMI(wmip);
+    streamExists = wmip->wmi_fatPipeExists;
+    UNLOCK_WMI(wmip);
+
+    if (!(streamExists & (1 << trafficClass))) {
+
+        A_MEMZERO(&cmd, sizeof(cmd));
+	    cmd.trafficClass = trafficClass;
+	    cmd.userPriority = userPriority;
+		cmd.inactivityInt = WMI_IMPLICIT_PSTREAM_INACTIVITY_INT;
+            /* Implicit streams are created with TSID 0xFF */
+        cmd.tsid = WMI_IMPLICIT_PSTREAM;
+        wmi_create_pstream_cmd(wmip, &cmd);
+    }
+
+    return trafficClass;
+}
+
+WMI_PRI_STREAM_ID
+wmi_get_stream_id(struct wmi_t *wmip, A_UINT8 trafficClass)
+{
+    return WMI_ACCESSCATEGORY_WMISTREAM(wmip, trafficClass);
+}
+
+/*
+ *  performs 802.3 to DIX encapsulation for received packets.
+ *  Assumes the entire 802.3 header is contigous.
+ */
+A_STATUS
+wmi_dot3_2_dix(struct wmi_t *wmip, void *osbuf)
+{
+    A_UINT8          *datap;
+    ATH_MAC_HDR      macHdr;
+    ATH_LLC_SNAP_HDR *llcHdr;
+
+    A_ASSERT(osbuf != NULL);
+    datap = A_NETBUF_DATA(osbuf);
+
+    A_MEMCPY(&macHdr, datap, sizeof(ATH_MAC_HDR));
+    llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(ATH_MAC_HDR));
+    macHdr.typeOrLen = llcHdr->etherType;
+
+    if (A_NETBUF_PULL(osbuf, sizeof(ATH_LLC_SNAP_HDR)) != A_OK) {
+        return A_NO_MEMORY;
+    }
+
+    datap = A_NETBUF_DATA(osbuf);
+
+    A_MEMCPY(datap, &macHdr, sizeof (ATH_MAC_HDR));
+
+    return (A_OK);
+}
+
+/*
+ * Removes a WMI data header
+ */
+A_STATUS
+wmi_data_hdr_remove(struct wmi_t *wmip, void *osbuf)
+{
+    A_ASSERT(osbuf != NULL);
+
+    return (A_NETBUF_PULL(osbuf, sizeof(WMI_DATA_HDR)));
+}
+
+void
+wmi_iterate_nodes(struct wmi_t *wmip, wlan_node_iter_func *f, void *arg)
+{
+    wlan_iterate_nodes(&wmip->wmi_scan_table, f, arg);
+}
+
+/*
+ * WMI Extended Event received from Target.
+ */
+A_STATUS
+wmi_control_rx_xtnd(struct wmi_t *wmip, void *osbuf)
+{
+    WMIX_CMD_HDR *cmd;
+    A_UINT16 id;
+    A_UINT8 *datap;
+    A_UINT32 len;
+    A_STATUS status = A_OK;
+
+    if (A_NETBUF_LEN(osbuf) < sizeof(WMIX_CMD_HDR)) {
+        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 1\n", DBGARG));
+        wmip->wmi_stats.cmd_len_err++;
+        A_NETBUF_FREE(osbuf);
+        return A_ERROR;
+    }
+
+    cmd = (WMIX_CMD_HDR *)A_NETBUF_DATA(osbuf);
+    id = cmd->commandId;
+
+    if (A_NETBUF_PULL(osbuf, sizeof(WMIX_CMD_HDR)) != A_OK) {
+        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 2\n", DBGARG));
+        wmip->wmi_stats.cmd_len_err++;
+        A_NETBUF_FREE(osbuf);
+        return A_ERROR;
+    }
+
+    datap = A_NETBUF_DATA(osbuf);
+    len = A_NETBUF_LEN(osbuf);
+
+    switch (id) {
+    case (WMIX_DSETOPENREQ_EVENTID):
+        status = wmi_dset_open_req_rx(wmip, datap, len);
+        break;
+#ifdef CONFIG_HOST_DSET_SUPPORT
+    case (WMIX_DSETCLOSE_EVENTID):
+        status = wmi_dset_close_rx(wmip, datap, len);
+        break;
+    case (WMIX_DSETDATAREQ_EVENTID):
+        status = wmi_dset_data_req_rx(wmip, datap, len);
+        break;
+#endif /* CONFIG_HOST_DSET_SUPPORT */
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+    case (WMIX_GPIO_INTR_EVENTID):
+        wmi_gpio_intr_rx(wmip, datap, len);
+        break;
+    case (WMIX_GPIO_DATA_EVENTID):
+        wmi_gpio_data_rx(wmip, datap, len);
+        break;
+    case (WMIX_GPIO_ACK_EVENTID):
+        wmi_gpio_ack_rx(wmip, datap, len);
+        break;
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+    case (WMIX_HB_CHALLENGE_RESP_EVENTID):
+        wmi_hbChallengeResp_rx(wmip, datap, len);
+        break;
+    case (WMIX_DBGLOG_EVENTID):
+        wmi_dbglog_event_rx(wmip, datap, len);
+        break;
+    default:
+        A_DPRINTF(DBG_WMI|DBG_ERROR,
+            (DBGFMT "Unknown id 0x%x\n", DBGARG, id));
+        wmip->wmi_stats.cmd_id_err++;
+        status = A_ERROR;
+        break;
+    }
+
+    return status;
+}
+
+/*
+ * Control Path
+ */
+A_UINT32 cmdRecvNum;
+
+A_STATUS
+wmi_control_rx(struct wmi_t *wmip, void *osbuf)
+{
+    WMI_CMD_HDR *cmd;
+    A_UINT16 id;
+    A_UINT8 *datap;
+    A_UINT32 len, i, loggingReq;
+    A_STATUS status = A_OK;
+
+    A_ASSERT(osbuf != NULL);
+    if (A_NETBUF_LEN(osbuf) < sizeof(WMI_CMD_HDR)) {
+        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 1\n", DBGARG));
+        wmip->wmi_stats.cmd_len_err++;
+        A_NETBUF_FREE(osbuf);
+        return A_ERROR;
+    }
+
+    cmd = (WMI_CMD_HDR *)A_NETBUF_DATA(osbuf);
+    id = cmd->commandId;
+
+    if (A_NETBUF_PULL(osbuf, sizeof(WMI_CMD_HDR)) != A_OK) {
+        A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 2\n", DBGARG));
+        wmip->wmi_stats.cmd_len_err++;
+        A_NETBUF_FREE(osbuf);
+        return A_ERROR;
+    }
+
+    datap = A_NETBUF_DATA(osbuf);
+    len = A_NETBUF_LEN(osbuf);
+
+    ar6000_get_driver_cfg(wmip->wmi_devt,
+                    AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS,
+                    &loggingReq);
+
+    if(loggingReq) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("WMI %d \n",id));
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("WMI recv, MsgNo %d : ", cmdRecvNum));
+        for(i = 0; i < len; i++)
+            AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("%x ", datap[i]));
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("\n"));
+    }
+
+    LOCK_WMI(wmip);
+    cmdRecvNum++;
+    UNLOCK_WMI(wmip);
+
+    switch (id) {
+    case (WMI_GET_BITRATE_CMDID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_BITRATE_CMDID\n", DBGARG));
+        status = wmi_bitrate_reply_rx(wmip, datap, len);
+        break;
+    case (WMI_GET_CHANNEL_LIST_CMDID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_CHANNEL_LIST_CMDID\n", DBGARG));
+        status = wmi_channelList_reply_rx(wmip, datap, len);
+        break;
+    case (WMI_GET_TX_PWR_CMDID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_TX_PWR_CMDID\n", DBGARG));
+        status = wmi_txPwr_reply_rx(wmip, datap, len);
+        break;
+    case (WMI_READY_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_READY_EVENTID\n", DBGARG));
+        status = wmi_ready_event_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        A_WMI_DBGLOG_INIT_DONE(wmip->wmi_devt);
+        break;
+    case (WMI_CONNECT_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CONNECT_EVENTID\n", DBGARG));
+        status = wmi_connect_event_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_DISCONNECT_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_DISCONNECT_EVENTID\n", DBGARG));
+        status = wmi_disconnect_event_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_TKIP_MICERR_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TKIP_MICERR_EVENTID\n", DBGARG));
+        status = wmi_tkip_micerr_event_rx(wmip, datap, len);
+        break;
+    case (WMI_BSSINFO_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_BSSINFO_EVENTID\n", DBGARG));
+        status = wmi_bssInfo_event_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_REGDOMAIN_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REGDOMAIN_EVENTID\n", DBGARG));
+        status = wmi_regDomain_event_rx(wmip, datap, len);
+        break;
+    case (WMI_PSTREAM_TIMEOUT_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_PSTREAM_TIMEOUT_EVENTID\n", DBGARG));
+        status = wmi_pstream_timeout_event_rx(wmip, datap, len);
+            /* pstreams are fatpipe abstractions that get implicitly created.
+             * User apps only deal with thinstreams. creation of a thinstream
+             * by the user or data traffic flow in an AC triggers implicit
+             * pstream creation. Do we need to send this event to App..?
+             * no harm in sending it.
+             */
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_NEIGHBOR_REPORT_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_NEIGHBOR_REPORT_EVENTID\n", DBGARG));
+        status = wmi_neighborReport_event_rx(wmip, datap, len);
+        break;
+    case (WMI_SCAN_COMPLETE_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_SCAN_COMPLETE_EVENTID\n", DBGARG));
+        status = wmi_scanComplete_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_CMDERROR_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CMDERROR_EVENTID\n", DBGARG));
+        status = wmi_errorEvent_rx(wmip, datap, len);
+        break;
+    case (WMI_REPORT_STATISTICS_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_STATISTICS_EVENTID\n", DBGARG));
+        status = wmi_statsEvent_rx(wmip, datap, len);
+        break;
+    case (WMI_RSSI_THRESHOLD_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_RSSI_THRESHOLD_EVENTID\n", DBGARG));
+        status = wmi_rssiThresholdEvent_rx(wmip, datap, len);
+        break;
+    case (WMI_ERROR_REPORT_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_ERROR_REPORT_EVENTID\n", DBGARG));
+        status = wmi_reportErrorEvent_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_OPT_RX_FRAME_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_OPT_RX_FRAME_EVENTID\n", DBGARG));
+        status = wmi_opt_frame_event_rx(wmip, datap, len);
+        break;
+    case (WMI_REPORT_ROAM_TBL_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_ROAM_TBL_EVENTID\n", DBGARG));
+        status = wmi_roam_tbl_event_rx(wmip, datap, len);
+        break;
+    case (WMI_EXTENSION_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_EXTENSION_EVENTID\n", DBGARG));
+        status = wmi_control_rx_xtnd(wmip, osbuf);
+        break;
+    case (WMI_CAC_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CAC_EVENTID\n", DBGARG));
+        status = wmi_cac_event_rx(wmip, datap, len);
+        break;
+    case (WMI_REPORT_ROAM_DATA_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_ROAM_DATA_EVENTID\n", DBGARG));
+        status = wmi_roam_data_event_rx(wmip, datap, len);
+        break;
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+    case (WMI_TEST_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TEST_EVENTID\n", DBGARG));
+        status = wmi_tcmd_test_report_rx(wmip, datap, len);
+        break;
+#endif
+    case (WMI_GET_FIXRATES_CMDID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_FIXRATES_CMDID\n", DBGARG));
+        status = wmi_ratemask_reply_rx(wmip, datap, len);
+        break;
+    case (WMI_TX_RETRY_ERR_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TX_RETRY_ERR_EVENTID\n", DBGARG));
+        status = wmi_txRetryErrEvent_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_SNR_THRESHOLD_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_SNR_THRESHOLD_EVENTID\n", DBGARG));
+        status = wmi_snrThresholdEvent_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_LQ_THRESHOLD_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_LQ_THRESHOLD_EVENTID\n", DBGARG));
+        status = wmi_lqThresholdEvent_rx(wmip, datap, len);
+        A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+        break;
+    case (WMI_APLIST_EVENTID):
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Received APLIST Event\n"));
+        status = wmi_aplistEvent_rx(wmip, datap, len);
+        break;
+    case (WMI_GET_KEEPALIVE_CMDID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_KEEPALIVE_CMDID\n", DBGARG));
+        status = wmi_keepalive_reply_rx(wmip, datap, len);
+        break;
+    case (WMI_GET_WOW_LIST_EVENTID):
+        status = wmi_get_wow_list_event_rx(wmip, datap, len);
+        break;
+    case (WMI_GET_PMKID_LIST_EVENTID):
+        A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_PMKID_LIST Event\n", DBGARG));
+        status = wmi_get_pmkid_list_event_rx(wmip, datap, len);
+        break;
+    default:
+        A_DPRINTF(DBG_WMI|DBG_ERROR,
+            (DBGFMT "Unknown id 0x%x\n", DBGARG, id));
+        wmip->wmi_stats.cmd_id_err++;
+        status = A_ERROR;
+        break;
+    }
+
+    A_NETBUF_FREE(osbuf);
+
+    return status;
+}
+
+static A_STATUS
+wmi_ready_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_READY_EVENT *ev = (WMI_READY_EVENT *)datap;
+
+    if (len < sizeof(WMI_READY_EVENT)) {
+        return A_EINVAL;
+    }
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+    wmip->wmi_ready = TRUE;
+    A_WMI_READY_EVENT(wmip->wmi_devt, ev->macaddr, ev->phyCapability);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_connect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_CONNECT_EVENT *ev;
+
+    if (len < sizeof(WMI_CONNECT_EVENT)) {
+        return A_EINVAL;
+    }
+    ev = (WMI_CONNECT_EVENT *)datap;
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "freq %d bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
+        DBGARG, ev->channel,
+        ev->bssid[0], ev->bssid[1], ev->bssid[2],
+        ev->bssid[3], ev->bssid[4], ev->bssid[5]));
+
+    A_MEMCPY(wmip->wmi_bssid, ev->bssid, ATH_MAC_LEN);
+
+    A_WMI_CONNECT_EVENT(wmip->wmi_devt, ev->channel, ev->bssid,
+                         ev->listenInterval, ev->beaconInterval,
+                         ev->networkType, ev->beaconIeLen,
+                         ev->assocReqLen, ev->assocRespLen,
+                         ev->assocInfo);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_regDomain_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_REG_DOMAIN_EVENT *ev;
+
+    if (len < sizeof(*ev)) {
+        return A_EINVAL;
+    }
+    ev = (WMI_REG_DOMAIN_EVENT *)datap;
+
+    A_WMI_REGDOMAIN_EVENT(wmip->wmi_devt, ev->regDomain);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_neighborReport_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_NEIGHBOR_REPORT_EVENT *ev;
+    int numAps;
+
+    if (len < sizeof(*ev)) {
+        return A_EINVAL;
+    }
+    ev = (WMI_NEIGHBOR_REPORT_EVENT *)datap;
+    numAps = ev->numberOfAps;
+
+    if (len < (int)(sizeof(*ev) + ((numAps - 1) * sizeof(WMI_NEIGHBOR_INFO)))) {
+        return A_EINVAL;
+    }
+
+    A_WMI_NEIGHBORREPORT_EVENT(wmip->wmi_devt, numAps, ev->neighbor);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_disconnect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_DISCONNECT_EVENT *ev;
+
+    if (len < sizeof(WMI_DISCONNECT_EVENT)) {
+        return A_EINVAL;
+    }
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    ev = (WMI_DISCONNECT_EVENT *)datap;
+
+    A_MEMZERO(wmip->wmi_bssid, sizeof(wmip->wmi_bssid));
+
+    A_WMI_DISCONNECT_EVENT(wmip->wmi_devt, ev->disconnectReason, ev->bssid,
+                            ev->assocRespLen, ev->assocInfo, ev->protocolReasonStatus);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_tkip_micerr_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_TKIP_MICERR_EVENT *ev;
+
+    if (len < sizeof(*ev)) {
+        return A_EINVAL;
+    }
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    ev = (WMI_TKIP_MICERR_EVENT *)datap;
+    A_WMI_TKIP_MICERR_EVENT(wmip->wmi_devt, ev->keyid, ev->ismcast);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_bssInfo_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    bss_t *bss;
+    WMI_BSS_INFO_HDR *bih;
+    A_UINT8 *buf;
+    A_UINT32 nodeCachingAllowed;
+
+    if (len <= sizeof(WMI_BSS_INFO_HDR)) {
+        return A_EINVAL;
+    }
+
+    A_WMI_BSSINFO_EVENT_RX(wmip->wmi_devt, datap, len);
+    /* What is driver config for wlan node caching? */
+    if(ar6000_get_driver_cfg(wmip->wmi_devt,
+                    AR6000_DRIVER_CFG_GET_WLANNODECACHING,
+                    &nodeCachingAllowed) != A_OK) {
+        return A_EINVAL;
+    }
+
+    if(!nodeCachingAllowed) {
+        return A_OK;
+    }
+
+
+    bih = (WMI_BSS_INFO_HDR *)datap;
+    buf = datap + sizeof(WMI_BSS_INFO_HDR);
+    len -= sizeof(WMI_BSS_INFO_HDR);
+
+    A_DPRINTF(DBG_WMI2, (DBGFMT "bssInfo event - ch %u, rssi %02x, "
+              "bssid \"%02x:%02x:%02x:%02x:%02x:%02x\"\n", DBGARG,
+              bih->channel, (unsigned char) bih->rssi, bih->bssid[0],
+              bih->bssid[1], bih->bssid[2], bih->bssid[3], bih->bssid[4],
+              bih->bssid[5]));
+
+    if(wps_enable && (bih->frameType == PROBERESP_FTYPE) ) {
+	    printk("%s() A_OK 2\n", __FUNCTION__);
+		return A_OK;
+    }
+
+    bss = wlan_find_node(&wmip->wmi_scan_table, bih->bssid);
+    if (bss != NULL) {
+        /*
+         * Free up the node.  Not the most efficient process given
+         * we are about to allocate a new node but it is simple and should be
+         * adequate.
+         */
+        wlan_node_reclaim(&wmip->wmi_scan_table, bss);
+    }
+
+    bss = wlan_node_alloc(&wmip->wmi_scan_table, len);
+    if (bss == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    bss->ni_snr        = bih->snr;
+    bss->ni_rssi       = bih->rssi;
+    A_ASSERT(bss->ni_buf != NULL);
+    A_MEMCPY(bss->ni_buf, buf, len);
+
+    if (wlan_parse_beacon(bss->ni_buf, len, &bss->ni_cie) != A_OK) {
+        wlan_node_free(bss);
+        return A_EINVAL;
+    }
+
+    /*
+     * Update the frequency in ie_chan, overwriting of channel number
+     * which is done in wlan_parse_beacon
+     */
+    bss->ni_cie.ie_chan = bih->channel;
+    wlan_setup_node(&wmip->wmi_scan_table, bss, bih->bssid);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_opt_frame_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    bss_t *bss;
+    WMI_OPT_RX_INFO_HDR *bih;
+    A_UINT8 *buf;
+
+    if (len <= sizeof(WMI_OPT_RX_INFO_HDR)) {
+        return A_EINVAL;
+    }
+
+    bih = (WMI_OPT_RX_INFO_HDR *)datap;
+    buf = datap + sizeof(WMI_OPT_RX_INFO_HDR);
+    len -= sizeof(WMI_OPT_RX_INFO_HDR);
+
+    A_DPRINTF(DBG_WMI2, (DBGFMT "opt frame event %2.2x:%2.2x\n", DBGARG,
+        bih->bssid[4], bih->bssid[5]));
+
+    bss = wlan_find_node(&wmip->wmi_scan_table, bih->bssid);
+    if (bss != NULL) {
+        /*
+         * Free up the node.  Not the most efficient process given
+         * we are about to allocate a new node but it is simple and should be
+         * adequate.
+         */
+        wlan_node_reclaim(&wmip->wmi_scan_table, bss);
+    }
+
+    bss = wlan_node_alloc(&wmip->wmi_scan_table, len);
+    if (bss == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    bss->ni_snr        = bih->snr;
+    bss->ni_cie.ie_chan = bih->channel;
+    A_ASSERT(bss->ni_buf != NULL);
+    A_MEMCPY(bss->ni_buf, buf, len);
+    wlan_setup_node(&wmip->wmi_scan_table, bss, bih->bssid);
+
+    return A_OK;
+}
+
+    /* This event indicates inactivity timeout of a fatpipe(pstream)
+     * at the target
+     */
+static A_STATUS
+wmi_pstream_timeout_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_PSTREAM_TIMEOUT_EVENT *ev;
+
+    if (len < sizeof(WMI_PSTREAM_TIMEOUT_EVENT)) {
+        return A_EINVAL;
+    }
+
+    A_DPRINTF(DBG_WMI, (DBGFMT "wmi_pstream_timeout_event_rx\n", DBGARG));
+
+    ev = (WMI_PSTREAM_TIMEOUT_EVENT *)datap;
+
+        /* When the pstream (fat pipe == AC) timesout, it means there were no
+         * thinStreams within this pstream & it got implicitly created due to
+         * data flow on this AC. We start the inactivity timer only for
+         * implicitly created pstream. Just reset the host state.
+         */
+        /* Set the activeTsids for this AC to 0 */
+    LOCK_WMI(wmip);
+    wmip->wmi_streamExistsForAC[ev->trafficClass]=0;
+    wmip->wmi_fatPipeExists &= ~(1 << ev->trafficClass);
+    UNLOCK_WMI(wmip);
+
+        /*Indicate inactivity to driver layer for this fatpipe (pstream)*/
+    A_WMI_STREAM_TX_INACTIVE(wmip->wmi_devt, ev->trafficClass);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_bitrate_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_BIT_RATE_CMD *reply;
+    A_INT32 rate;
+
+    if (len < sizeof(WMI_BIT_RATE_CMD)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_BIT_RATE_CMD *)datap;
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - rateindex %d\n", DBGARG, reply->rateIndex));
+
+    if (reply->rateIndex == RATE_AUTO) {
+        rate = RATE_AUTO;
+    } else {
+        rate = wmi_rateTable[(A_UINT32) reply->rateIndex];
+    }
+
+    A_WMI_BITRATE_RX(wmip->wmi_devt, rate);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_ratemask_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_FIX_RATES_CMD *reply;
+
+    if (len < sizeof(WMI_BIT_RATE_CMD)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_FIX_RATES_CMD *)datap;
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - fixed rate mask %x\n", DBGARG, reply->fixRateMask));
+
+    A_WMI_RATEMASK_RX(wmip->wmi_devt, reply->fixRateMask);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_channelList_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_CHANNEL_LIST_REPLY *reply;
+
+    if (len < sizeof(WMI_CHANNEL_LIST_REPLY)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_CHANNEL_LIST_REPLY *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_CHANNELLIST_RX(wmip->wmi_devt, reply->numChannels,
+                          reply->channelList);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_txPwr_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_TX_PWR_REPLY *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_TX_PWR_REPLY *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_TXPWR_RX(wmip->wmi_devt, reply->dbM);
+
+    return A_OK;
+}
+static A_STATUS
+wmi_keepalive_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_GET_KEEPALIVE_CMD *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_GET_KEEPALIVE_CMD *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_KEEPALIVE_RX(wmip->wmi_devt, reply->configured);
+
+    return A_OK;
+}
+
+
+static A_STATUS
+wmi_dset_open_req_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMIX_DSETOPENREQ_EVENT *dsetopenreq;
+
+    if (len < sizeof(WMIX_DSETOPENREQ_EVENT)) {
+        return A_EINVAL;
+    }
+    dsetopenreq = (WMIX_DSETOPENREQ_EVENT *)datap;
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - dset_id=0x%x\n", DBGARG, dsetopenreq->dset_id));
+    A_WMI_DSET_OPEN_REQ(wmip->wmi_devt,
+                        dsetopenreq->dset_id,
+                        dsetopenreq->targ_dset_handle,
+                        dsetopenreq->targ_reply_fn,
+                        dsetopenreq->targ_reply_arg);
+
+    return A_OK;
+}
+
+#ifdef CONFIG_HOST_DSET_SUPPORT
+static A_STATUS
+wmi_dset_close_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMIX_DSETCLOSE_EVENT *dsetclose;
+
+    if (len < sizeof(WMIX_DSETCLOSE_EVENT)) {
+        return A_EINVAL;
+    }
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    dsetclose = (WMIX_DSETCLOSE_EVENT *)datap;
+    A_WMI_DSET_CLOSE(wmip->wmi_devt, dsetclose->access_cookie);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_dset_data_req_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMIX_DSETDATAREQ_EVENT *dsetdatareq;
+
+    if (len < sizeof(WMIX_DSETDATAREQ_EVENT)) {
+        return A_EINVAL;
+    }
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    dsetdatareq = (WMIX_DSETDATAREQ_EVENT *)datap;
+    A_WMI_DSET_DATA_REQ(wmip->wmi_devt,
+                         dsetdatareq->access_cookie,
+                         dsetdatareq->offset,
+                         dsetdatareq->length,
+                         dsetdatareq->targ_buf,
+                         dsetdatareq->targ_reply_fn,
+                         dsetdatareq->targ_reply_arg);
+
+    return A_OK;
+}
+#endif /* CONFIG_HOST_DSET_SUPPORT */
+
+static A_STATUS
+wmi_scanComplete_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_SCAN_COMPLETE_EVENT *ev;
+
+    ev = (WMI_SCAN_COMPLETE_EVENT *)datap;
+    A_WMI_SCANCOMPLETE_EVENT(wmip->wmi_devt, ev->status);
+
+    return A_OK;
+}
+
+/*
+ * Target is reporting a programming error.  This is for
+ * developer aid only.  Target only checks a few common violations
+ * and it is responsibility of host to do all error checking.
+ * Behavior of target after wmi error event is undefined.
+ * A reset is recommended.
+ */
+static A_STATUS
+wmi_errorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_CMD_ERROR_EVENT *ev;
+
+    ev = (WMI_CMD_ERROR_EVENT *)datap;
+    AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Programming Error: cmd=%d ", ev->commandId));
+    switch (ev->errorCode) {
+    case (INVALID_PARAM):
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Illegal Parameter\n"));
+        break;
+    case (ILLEGAL_STATE):
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Illegal State\n"));
+        break;
+    case (INTERNAL_ERROR):
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Internal Error\n"));
+        break;
+    }
+
+    return A_OK;
+}
+
+
+static A_STATUS
+wmi_statsEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_TARGET_STATS *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_TARGET_STATS *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_TARGETSTATS_EVENT(wmip->wmi_devt, reply);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_rssiThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_RSSI_THRESHOLD_EVENT *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_RSSI_THRESHOLD_EVENT *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_RSSI_THRESHOLD_EVENT(wmip->wmi_devt, reply->range, reply->rssi);
+
+    return A_OK;
+}
+
+
+static A_STATUS
+wmi_reportErrorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_TARGET_ERROR_REPORT_EVENT *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_TARGET_ERROR_REPORT_EVENT *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_REPORT_ERROR_EVENT(wmip->wmi_devt, reply->errorVal);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_cac_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_CAC_EVENT *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_CAC_EVENT *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_CAC_EVENT(wmip->wmi_devt, reply->ac,
+                reply->cac_indication, reply->statusCode,
+                reply->tspecSuggestion);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_hbChallengeResp_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMIX_HB_CHALLENGE_RESP_EVENT *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMIX_HB_CHALLENGE_RESP_EVENT *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "wmi: challenge response event\n", DBGARG));
+
+    A_WMI_HBCHALLENGERESP_EVENT(wmip->wmi_devt, reply->cookie, reply->source);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_roam_tbl_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_TARGET_ROAM_TBL *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_TARGET_ROAM_TBL *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_ROAM_TABLE_EVENT(wmip->wmi_devt, reply);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_roam_data_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_TARGET_ROAM_DATA *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_TARGET_ROAM_DATA *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_ROAM_DATA_EVENT(wmip->wmi_devt, reply);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_txRetryErrEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_TX_RETRY_ERR_EVENT *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_TX_RETRY_ERR_EVENT *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_TX_RETRY_ERR_EVENT(wmip->wmi_devt);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_snrThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_SNR_THRESHOLD_EVENT *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_SNR_THRESHOLD_EVENT *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_SNR_THRESHOLD_EVENT_RX(wmip->wmi_devt, reply->range, reply->snr);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_lqThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_LQ_THRESHOLD_EVENT *reply;
+
+    if (len < sizeof(*reply)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_LQ_THRESHOLD_EVENT *)datap;
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_LQ_THRESHOLD_EVENT_RX(wmip->wmi_devt, reply->range, reply->lq);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_aplistEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    A_UINT16 ap_info_entry_size;
+    WMI_APLIST_EVENT *ev = (WMI_APLIST_EVENT *)datap;
+    WMI_AP_INFO_V1 *ap_info_v1;
+    A_UINT8 i;
+
+    if (len < sizeof(WMI_APLIST_EVENT)) {
+        return A_EINVAL;
+    }
+
+    if (ev->apListVer == APLIST_VER1) {
+        ap_info_entry_size = sizeof(WMI_AP_INFO_V1);
+        ap_info_v1 = (WMI_AP_INFO_V1 *)ev->apList;
+    } else {
+        return A_EINVAL;
+    }
+
+    AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Number of APs in APLIST Event is %d\n", ev->numAP));
+    if (len < (int)(sizeof(WMI_APLIST_EVENT) +
+              (ev->numAP - 1) * ap_info_entry_size))
+    {
+        return A_EINVAL;
+    }
+
+    /*
+     * AP List Ver1 Contents
+     */
+    for (i = 0; i < ev->numAP; i++) {
+        AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("AP#%d BSSID %2.2x %2.2x %2.2x %2.2x %2.2x %2.2x "\
+                    "Channel %d\n", i,
+                   ap_info_v1->bssid[0], ap_info_v1->bssid[1],
+                   ap_info_v1->bssid[2], ap_info_v1->bssid[3],
+                   ap_info_v1->bssid[4], ap_info_v1->bssid[5],
+                   ap_info_v1->channel));
+        ap_info_v1++;
+    }
+    return A_OK;
+}
+
+static A_STATUS
+wmi_dbglog_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    A_UINT32 dropped;
+
+    dropped = *((A_UINT32 *)datap);
+    datap += sizeof(dropped);
+    len -= sizeof(dropped);
+    A_WMI_DBGLOG_EVENT(wmip->wmi_devt, dropped, datap, len);
+    return A_OK;
+}
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+static A_STATUS
+wmi_gpio_intr_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMIX_GPIO_INTR_EVENT *gpio_intr = (WMIX_GPIO_INTR_EVENT *)datap;
+
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - intrmask=0x%x input=0x%x.\n", DBGARG,
+        gpio_intr->intr_mask, gpio_intr->input_values));
+
+    A_WMI_GPIO_INTR_RX(gpio_intr->intr_mask, gpio_intr->input_values);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_gpio_data_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMIX_GPIO_DATA_EVENT *gpio_data = (WMIX_GPIO_DATA_EVENT *)datap;
+
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - reg=%d value=0x%x\n", DBGARG,
+        gpio_data->reg_id, gpio_data->value));
+
+    A_WMI_GPIO_DATA_RX(gpio_data->reg_id, gpio_data->value);
+
+    return A_OK;
+}
+
+static A_STATUS
+wmi_gpio_ack_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    A_WMI_GPIO_ACK_RX();
+
+    return A_OK;
+}
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+/*
+ * Called to send a wmi command. Command specific data is already built
+ * on osbuf and current osbuf->data points to it.
+ */
+A_STATUS
+wmi_cmd_send(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
+               WMI_SYNC_FLAG syncflag)
+{
+#define IS_LONG_CMD(cmdId) ((cmdId == WMI_OPT_TX_FRAME_CMDID) || (cmdId == WMI_ADD_WOW_PATTERN_CMDID))
+    WMI_CMD_HDR         *cHdr;
+    WMI_PRI_STREAM_ID   streamID = WMI_CONTROL_PRI;
+
+    A_ASSERT(osbuf != NULL);
+
+    if (syncflag >= END_WMIFLAG) {
+        return A_EINVAL;
+    }
+
+    if ((syncflag == SYNC_BEFORE_WMIFLAG) || (syncflag == SYNC_BOTH_WMIFLAG)) {
+        /*
+         * We want to make sure all data currently queued is transmitted before
+         * the cmd execution.  Establish a new sync point.
+         */
+        wmi_sync_point(wmip);
+    }
+
+    if (A_NETBUF_PUSH(osbuf, sizeof(WMI_CMD_HDR)) != A_OK) {
+        return A_NO_MEMORY;
+    }
+
+    cHdr = (WMI_CMD_HDR *)A_NETBUF_DATA(osbuf);
+    cHdr->commandId = cmdId;
+
+    /*
+     * Send cmd, some via control pipe, others via data pipe
+     */
+    if (IS_LONG_CMD(cmdId)) {
+        wmi_data_hdr_add(wmip, osbuf, CNTL_MSGTYPE);
+        // TODO ... these can now go through the control endpoint via HTC 2.0
+        streamID = WMI_BEST_EFFORT_PRI;
+    }
+    A_WMI_CONTROL_TX(wmip->wmi_devt, osbuf, streamID);
+
+    if ((syncflag == SYNC_AFTER_WMIFLAG) || (syncflag == SYNC_BOTH_WMIFLAG)) {
+        /*
+         * We want to make sure all new data queued waits for the command to
+         * execute. Establish a new sync point.
+         */
+        wmi_sync_point(wmip);
+    }
+    return (A_OK);
+#undef IS_LONG_CMD
+}
+
+A_STATUS
+wmi_cmd_send_xtnd(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
+                  WMI_SYNC_FLAG syncflag)
+{
+    WMIX_CMD_HDR     *cHdr;
+
+    if (A_NETBUF_PUSH(osbuf, sizeof(WMIX_CMD_HDR)) != A_OK) {
+        return A_NO_MEMORY;
+    }
+
+    cHdr = (WMIX_CMD_HDR *)A_NETBUF_DATA(osbuf);
+    cHdr->commandId = cmdId;
+
+    return wmi_cmd_send(wmip, osbuf, WMI_EXTENSION_CMDID, syncflag);
+}
+
+A_STATUS
+wmi_connect_cmd(struct wmi_t *wmip, NETWORK_TYPE netType,
+                DOT11_AUTH_MODE dot11AuthMode, AUTH_MODE authMode,
+                CRYPTO_TYPE pairwiseCrypto, A_UINT8 pairwiseCryptoLen,
+                CRYPTO_TYPE groupCrypto,A_UINT8 groupCryptoLen,
+                int ssidLength, A_UCHAR *ssid,
+                A_UINT8 *bssid, A_UINT16 channel, A_UINT32 ctrl_flags)
+{
+    void *osbuf;
+    WMI_CONNECT_CMD *cc;
+
+    if ((pairwiseCrypto == NONE_CRYPT) && (groupCrypto != NONE_CRYPT)) {
+        return A_EINVAL;
+    }
+    if ((pairwiseCrypto != NONE_CRYPT) && (groupCrypto == NONE_CRYPT)) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(WMI_CONNECT_CMD));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(WMI_CONNECT_CMD));
+
+    cc = (WMI_CONNECT_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cc, sizeof(*cc));
+
+    A_MEMCPY(cc->ssid, ssid, ssidLength);
+    cc->ssidLength          = ssidLength;
+    cc->networkType         = netType;
+    cc->dot11AuthMode       = dot11AuthMode;
+    cc->authMode            = authMode;
+    cc->pairwiseCryptoType  = pairwiseCrypto;
+    cc->pairwiseCryptoLen   = pairwiseCryptoLen;
+    cc->groupCryptoType     = groupCrypto;
+    cc->groupCryptoLen      = groupCryptoLen;
+    cc->channel             = channel;
+    cc->ctrl_flags          = ctrl_flags;
+
+    if (bssid != NULL) {
+        A_MEMCPY(cc->bssid, bssid, ATH_MAC_LEN);
+    }
+    if (wmi_set_keepalive_cmd(wmip, wmip->wmi_keepaliveInterval) != A_OK) {
+        return(A_ERROR);
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_CONNECT_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_reconnect_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT16 channel)
+{
+    void *osbuf;
+    WMI_RECONNECT_CMD *cc;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(WMI_RECONNECT_CMD));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(WMI_RECONNECT_CMD));
+
+    cc = (WMI_RECONNECT_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cc, sizeof(*cc));
+
+    cc->channel = channel;
+
+    if (bssid != NULL) {
+        A_MEMCPY(cc->bssid, bssid, ATH_MAC_LEN);
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_RECONNECT_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_disconnect_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+    A_STATUS status;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    /* Bug fix for 24817(elevator bug) - the disconnect command does not
+       need to do a SYNC before.*/
+    status = (wmi_cmd_send(wmip, osbuf, WMI_DISCONNECT_CMDID,
+                         NO_SYNC_WMIFLAG));
+
+    return status;
+}
+
+A_STATUS
+wmi_startscan_cmd(struct wmi_t *wmip, WMI_SCAN_TYPE scanType,
+                  A_BOOL forceFgScan, A_BOOL isLegacy,
+                  A_UINT32 homeDwellTime, A_UINT32 forceScanInterval)
+{
+    void *osbuf;
+    WMI_START_SCAN_CMD *sc;
+
+    if ((scanType != WMI_LONG_SCAN) && (scanType != WMI_SHORT_SCAN)) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*sc));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*sc));
+
+    sc = (WMI_START_SCAN_CMD *)(A_NETBUF_DATA(osbuf));
+    sc->scanType = scanType;
+    sc->forceFgScan = forceFgScan;
+    sc->isLegacy = isLegacy;
+    sc->homeDwellTime = homeDwellTime;
+    sc->forceScanInterval = forceScanInterval;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_START_SCAN_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_scanparams_cmd(struct wmi_t *wmip, A_UINT16 fg_start_sec,
+                   A_UINT16 fg_end_sec, A_UINT16 bg_sec,
+                   A_UINT16 minact_chdw_msec, A_UINT16 maxact_chdw_msec,
+                   A_UINT16 pas_chdw_msec,
+                   A_UINT8 shScanRatio, A_UINT8 scanCtrlFlags,
+                   A_UINT32 max_dfsch_act_time)
+{
+    void *osbuf;
+    WMI_SCAN_PARAMS_CMD *sc;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*sc));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*sc));
+
+    sc = (WMI_SCAN_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(sc, sizeof(*sc));
+    sc->fg_start_period  = fg_start_sec;
+    sc->fg_end_period    = fg_end_sec;
+    sc->bg_period        = bg_sec;
+    sc->minact_chdwell_time = minact_chdw_msec;
+    sc->maxact_chdwell_time = maxact_chdw_msec;
+    sc->pas_chdwell_time = pas_chdw_msec;
+    sc->shortScanRatio   = shScanRatio;
+    sc->scanCtrlFlags    = scanCtrlFlags;
+    sc->max_dfsch_act_time = max_dfsch_act_time;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_SCAN_PARAMS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_bssfilter_cmd(struct wmi_t *wmip, A_UINT8 filter, A_UINT32 ieMask)
+{
+    void *osbuf;
+    WMI_BSS_FILTER_CMD *cmd;
+
+    if (filter >= LAST_BSS_FILTER) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_BSS_FILTER_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->bssFilter = filter;
+    cmd->ieMask = ieMask;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BSS_FILTER_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_probedSsid_cmd(struct wmi_t *wmip, A_UINT8 index, A_UINT8 flag,
+                   A_UINT8 ssidLength, A_UCHAR *ssid)
+{
+    void *osbuf;
+    WMI_PROBED_SSID_CMD *cmd;
+
+    if (index > MAX_PROBED_SSID_INDEX) {
+        return A_EINVAL;
+    }
+    if (ssidLength > sizeof(cmd->ssid)) {
+        return A_EINVAL;
+    }
+    if ((flag & (DISABLE_SSID_FLAG | ANY_SSID_FLAG)) && (ssidLength > 0)) {
+        return A_EINVAL;
+    }
+    if ((flag & SPECIFIC_SSID_FLAG) && !ssidLength) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_PROBED_SSID_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->entryIndex = index;
+    cmd->flag       = flag;
+    cmd->ssidLength = ssidLength;
+    A_MEMCPY(cmd->ssid, ssid, ssidLength);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_PROBED_SSID_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_listeninterval_cmd(struct wmi_t *wmip, A_UINT16 listenInterval, A_UINT16 listenBeacons)
+{
+    void *osbuf;
+    WMI_LISTEN_INT_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_LISTEN_INT_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->listenInterval = listenInterval;
+    cmd->numBeacons = listenBeacons;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_LISTEN_INT_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_bmisstime_cmd(struct wmi_t *wmip, A_UINT16 bmissTime, A_UINT16 bmissBeacons)
+{
+    void *osbuf;
+    WMI_BMISS_TIME_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_BMISS_TIME_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->bmissTime = bmissTime;
+    cmd->numBeacons =  bmissBeacons;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BMISS_TIME_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_associnfo_cmd(struct wmi_t *wmip, A_UINT8 ieType,
+                     A_UINT8 ieLen, A_UINT8 *ieInfo)
+{
+    void *osbuf;
+    WMI_SET_ASSOC_INFO_CMD *cmd;
+    A_UINT16 cmdLen;
+
+    cmdLen = sizeof(*cmd) + ieLen - 1;
+    osbuf = A_NETBUF_ALLOC(cmdLen);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, cmdLen);
+
+    cmd = (WMI_SET_ASSOC_INFO_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, cmdLen);
+    cmd->ieType = ieType;
+    cmd->bufferSize = ieLen;
+    A_MEMCPY(cmd->assocInfo, ieInfo, ieLen);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_ASSOC_INFO_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_powermode_cmd(struct wmi_t *wmip, A_UINT8 powerMode)
+{
+    void *osbuf;
+    WMI_POWER_MODE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_POWER_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->powerMode = powerMode;
+    wmip->wmi_powerMode = powerMode;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWER_MODE_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_ibsspmcaps_cmd(struct wmi_t *wmip, A_UINT8 pmEnable, A_UINT8 ttl,
+                   A_UINT16 atim_windows, A_UINT16 timeout_value)
+{
+    void *osbuf;
+    WMI_IBSS_PM_CAPS_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_IBSS_PM_CAPS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->power_saving = pmEnable;
+    cmd->ttl = ttl;
+    cmd->atim_windows = atim_windows;
+    cmd->timeout_value = timeout_value;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_IBSS_PM_CAPS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_pmparams_cmd(struct wmi_t *wmip, A_UINT16 idlePeriod,
+                 A_UINT16 psPollNum, A_UINT16 dtimPolicy)
+{
+    void *osbuf;
+    WMI_POWER_PARAMS_CMD *pm;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*pm));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*pm));
+
+    pm = (WMI_POWER_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(pm, sizeof(*pm));
+    pm->idle_period   = idlePeriod;
+    pm->pspoll_number = psPollNum;
+    pm->dtim_policy   = dtimPolicy;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWER_PARAMS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_disctimeout_cmd(struct wmi_t *wmip, A_UINT8 timeout)
+{
+    void *osbuf;
+    WMI_DISC_TIMEOUT_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_DISC_TIMEOUT_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->disconnectTimeout = timeout;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_DISC_TIMEOUT_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_addKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex, CRYPTO_TYPE keyType,
+               A_UINT8 keyUsage, A_UINT8 keyLength, A_UINT8 *keyRSC,
+               A_UINT8 *keyMaterial, A_UINT8 key_op_ctrl,
+               WMI_SYNC_FLAG sync_flag)
+{
+    void *osbuf;
+    WMI_ADD_CIPHER_KEY_CMD *cmd;
+
+    if ((keyIndex > WMI_MAX_KEY_INDEX) || (keyLength > WMI_MAX_KEY_LEN) ||
+        (keyMaterial == NULL))
+    {
+        return A_EINVAL;
+    }
+
+    if ((WEP_CRYPT != keyType) && (NULL == keyRSC)) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_ADD_CIPHER_KEY_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->keyIndex = keyIndex;
+    cmd->keyType  = keyType;
+    cmd->keyUsage = keyUsage;
+    cmd->keyLength = keyLength;
+    A_MEMCPY(cmd->key, keyMaterial, keyLength);
+    if (NULL != keyRSC) {
+        A_MEMCPY(cmd->keyRSC, keyRSC, sizeof(cmd->keyRSC));
+    }
+    cmd->key_op_ctrl = key_op_ctrl;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_CIPHER_KEY_CMDID, sync_flag));
+}
+
+A_STATUS
+wmi_add_krk_cmd(struct wmi_t *wmip, A_UINT8 *krk)
+{
+    void *osbuf;
+    WMI_ADD_KRK_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_ADD_KRK_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    A_MEMCPY(cmd->krk, krk, WMI_KRK_LEN);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_KRK_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_delete_krk_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);
+
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_KRK_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_deleteKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex)
+{
+    void *osbuf;
+    WMI_DELETE_CIPHER_KEY_CMD *cmd;
+
+    if (keyIndex > WMI_MAX_KEY_INDEX) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_DELETE_CIPHER_KEY_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->keyIndex = keyIndex;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_CIPHER_KEY_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_setPmkid_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT8 *pmkId,
+                 A_BOOL set)
+{
+    void *osbuf;
+    WMI_SET_PMKID_CMD *cmd;
+
+    if (bssid == NULL) {
+        return A_EINVAL;
+    }
+
+    if ((set == TRUE) && (pmkId == NULL)) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_PMKID_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
+    if (set == TRUE) {
+        A_MEMCPY(cmd->pmkid, pmkId, sizeof(cmd->pmkid));
+        cmd->enable = PMKID_ENABLE;
+    } else {
+        A_MEMZERO(cmd->pmkid, sizeof(cmd->pmkid));
+        cmd->enable = PMKID_DISABLE;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_PMKID_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_tkip_countermeasures_cmd(struct wmi_t *wmip, A_BOOL en)
+{
+    void *osbuf;
+    WMI_SET_TKIP_COUNTERMEASURES_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_TKIP_COUNTERMEASURES_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->cm_en = (en == TRUE)? WMI_TKIP_CM_ENABLE : WMI_TKIP_CM_DISABLE;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_TKIP_COUNTERMEASURES_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_akmp_params_cmd(struct wmi_t *wmip,
+                        WMI_SET_AKMP_PARAMS_CMD *akmpParams)
+{
+    void *osbuf;
+    WMI_SET_AKMP_PARAMS_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+    cmd = (WMI_SET_AKMP_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->akmpInfo = akmpParams->akmpInfo;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_AKMP_PARAMS_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_pmkid_list_cmd(struct wmi_t *wmip,
+                       WMI_SET_PMKID_LIST_CMD *pmkInfo)
+{
+    void *osbuf;
+    WMI_SET_PMKID_LIST_CMD *cmd;
+    A_UINT16 cmdLen;
+    A_UINT8 i;
+
+    cmdLen = sizeof(pmkInfo->numPMKID) +
+             pmkInfo->numPMKID * sizeof(WMI_PMKID);
+
+    osbuf = A_NETBUF_ALLOC(cmdLen);
+
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, cmdLen);
+    cmd = (WMI_SET_PMKID_LIST_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->numPMKID = pmkInfo->numPMKID;
+
+    for (i = 0; i < cmd->numPMKID; i++) {
+        A_MEMCPY(&cmd->pmkidList[i], &pmkInfo->pmkidList[i],
+                 WMI_PMKID_LEN);
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_PMKID_LIST_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_pmkid_list_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_PMKID_LIST_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_dataSync_send(struct wmi_t *wmip, void *osbuf, WMI_PRI_STREAM_ID streamID)
+{
+    WMI_DATA_HDR     *dtHdr;
+
+    A_ASSERT(streamID != WMI_CONTROL_PRI);
+    A_ASSERT(osbuf != NULL);
+
+    if (A_NETBUF_PUSH(osbuf, sizeof(WMI_DATA_HDR)) != A_OK) {
+        return A_NO_MEMORY;
+    }
+
+    dtHdr = (WMI_DATA_HDR *)A_NETBUF_DATA(osbuf);
+    dtHdr->info =
+      (SYNC_MSGTYPE & WMI_DATA_HDR_MSG_TYPE_MASK) << WMI_DATA_HDR_MSG_TYPE_SHIFT;
+
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter - streamID %d\n", DBGARG, streamID));
+
+    return (A_WMI_CONTROL_TX(wmip->wmi_devt, osbuf, streamID));
+}
+
+typedef struct _WMI_DATA_SYNC_BUFS {
+    A_UINT8            trafficClass;
+    void               *osbuf;
+}WMI_DATA_SYNC_BUFS;
+
+static A_STATUS
+wmi_sync_point(struct wmi_t *wmip)
+{
+	void *cmd_osbuf;
+    WMI_DATA_SYNC_BUFS dataSyncBufs[WMM_NUM_AC];
+	A_UINT8 i,numPriStreams=0;
+	A_STATUS status;
+
+	A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    memset(dataSyncBufs,0,sizeof(dataSyncBufs));
+
+    /* lock out while we walk through the priority list and assemble our local array */
+    LOCK_WMI(wmip);
+
+    for (i=0; i < WMM_NUM_AC ; i++) {
+		if (wmip->wmi_fatPipeExists & (1 << i)) {
+            numPriStreams++;
+            dataSyncBufs[numPriStreams-1].trafficClass = i;
+        }
+    }
+
+    UNLOCK_WMI(wmip);
+
+    /* dataSyncBufs is now filled with entries (starting at index 0) containing valid streamIDs */
+
+    do {
+	    /*
+	     * We allocate all network buffers needed so we will be able to
+	     * send all required frames.
+	     */
+	    cmd_osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+	    if (cmd_osbuf == NULL) {
+		    status = A_NO_MEMORY;
+            break;
+	    }
+
+	    for (i=0; i < numPriStreams ; i++) {
+	        dataSyncBufs[i].osbuf = A_NETBUF_ALLOC(0);
+            if (dataSyncBufs[i].osbuf == NULL) {
+                status = A_NO_MEMORY;
+                break;
+            }
+	    } //end for
+
+	    /*
+	     * Send sync cmd followed by sync data messages on all endpoints being
+	     * used
+	     */
+	    status = wmi_cmd_send(wmip, cmd_osbuf, WMI_SYNCHRONIZE_CMDID,
+						  NO_SYNC_WMIFLAG);
+
+        if (A_FAILED(status)) {
+            break;
+        }
+            /* cmd buffer sent, we no longer own it */
+        cmd_osbuf = NULL;
+
+		for(i=0; i < numPriStreams; i++) {
+            A_ASSERT(dataSyncBufs[i].osbuf != NULL);
+
+            status = wmi_dataSync_send(wmip, dataSyncBufs[i].osbuf,
+                        WMI_ACCESSCATEGORY_WMISTREAM(wmip,dataSyncBufs[i].trafficClass));
+
+            if (A_FAILED(status)) {
+                break;
+            }
+            /* we don't own this buffer anymore, NULL it out of the array so it
+             * won't get cleaned up */
+            dataSyncBufs[i].osbuf = NULL;
+		} //end for
+
+    } while(FALSE);
+
+    /* free up any resources left over (possibly due to an error) */
+
+    if (cmd_osbuf != NULL) {
+        A_NETBUF_FREE(cmd_osbuf);
+    }
+
+    for (i = 0; i < numPriStreams; i++) {
+        if (dataSyncBufs[i].osbuf != NULL) {
+            A_NETBUF_FREE(dataSyncBufs[i].osbuf);
+        }
+    }
+
+	return (status);
+}
+
+A_STATUS
+wmi_create_pstream_cmd(struct wmi_t *wmip, WMI_CREATE_PSTREAM_CMD *params)
+{
+    void *osbuf;
+    WMI_CREATE_PSTREAM_CMD *cmd;
+	A_UINT16 activeTsids=0;
+    A_UINT8 fatPipeExistsForAC=0;
+
+    /* Validate all the parameters. */
+    if( !((params->userPriority < 8) &&
+         (params->userPriority <= 0x7) &&
+         (convert_userPriority_to_trafficClass(params->userPriority) == params->trafficClass)  &&
+         (params->trafficDirection == UPLINK_TRAFFIC ||
+            params->trafficDirection == DNLINK_TRAFFIC ||
+            params->trafficDirection == BIDIR_TRAFFIC) &&
+         (params->trafficType == TRAFFIC_TYPE_APERIODIC ||
+            params->trafficType == TRAFFIC_TYPE_PERIODIC ) &&
+         (params->voicePSCapability == DISABLE_FOR_THIS_AC  ||
+            params->voicePSCapability == ENABLE_FOR_THIS_AC ||
+            params->voicePSCapability == ENABLE_FOR_ALL_AC) &&
+         (params->tsid == WMI_IMPLICIT_PSTREAM || params->tsid <= WMI_MAX_THINSTREAM)) )
+    {
+        return  A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Sending create_pstream_cmd: ac=%d    tsid:%d\n", DBGARG,
+        params->trafficClass, params->tsid));
+
+    cmd = (WMI_CREATE_PSTREAM_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    A_MEMCPY(cmd, params, sizeof(*cmd));
+
+        /* this is an implicitly created Fat pipe */
+    if (params->tsid == WMI_IMPLICIT_PSTREAM) {
+        LOCK_WMI(wmip);
+        fatPipeExistsForAC = (wmip->wmi_fatPipeExists & (1 << params->trafficClass));
+        wmip->wmi_fatPipeExists |= (1<<params->trafficClass);
+        UNLOCK_WMI(wmip);
+    } else {
+            /* this is an explicitly created thin stream within a fat pipe */
+        LOCK_WMI(wmip);
+        fatPipeExistsForAC = (wmip->wmi_fatPipeExists & (1 << params->trafficClass));
+        activeTsids = wmip->wmi_streamExistsForAC[params->trafficClass];
+        wmip->wmi_streamExistsForAC[params->trafficClass] |= (1<<params->tsid);
+            /* if a thinstream becomes active, the fat pipe automatically
+            * becomes active
+            */
+        wmip->wmi_fatPipeExists |= (1<<params->trafficClass);
+        UNLOCK_WMI(wmip);
+    }
+
+        /* Indicate activty change to driver layer only if this is the
+         * first TSID to get created in this AC explicitly or an implicit
+         * fat pipe is getting created.
+         */
+    if (!fatPipeExistsForAC) {
+        A_WMI_STREAM_TX_ACTIVE(wmip->wmi_devt, params->trafficClass);
+    }
+
+    /* mike: should be SYNC_BEFORE_WMIFLAG */
+    return (wmi_cmd_send(wmip, osbuf, WMI_CREATE_PSTREAM_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_delete_pstream_cmd(struct wmi_t *wmip, A_UINT8 trafficClass, A_UINT8 tsid)
+{
+    void *osbuf;
+    WMI_DELETE_PSTREAM_CMD *cmd;
+    A_STATUS status;
+	A_UINT16 activeTsids=0;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_DELETE_PSTREAM_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+
+    cmd->trafficClass = trafficClass;
+    cmd->tsid = tsid;
+
+    LOCK_WMI(wmip);
+    activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
+    UNLOCK_WMI(wmip);
+
+        /* Check if the tsid was created & exists */
+    if (!(activeTsids & (1<<tsid))) {
+
+        A_DPRINTF(DBG_WMI,
+        (DBGFMT "TSID %d does'nt exist for trafficClass: %d\n", DBGARG, tsid, trafficClass));
+            /* TODO: return a more appropriate err code */
+        return A_ERROR;
+    }
+
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Sending delete_pstream_cmd: trafficClass: %d tsid=%d\n", DBGARG, trafficClass, tsid));
+
+    status = (wmi_cmd_send(wmip, osbuf, WMI_DELETE_PSTREAM_CMDID,
+                         SYNC_BEFORE_WMIFLAG));
+
+    LOCK_WMI(wmip);
+    wmip->wmi_streamExistsForAC[trafficClass] &= ~(1<<tsid);
+    activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
+    UNLOCK_WMI(wmip);
+
+
+        /* Indicate stream inactivity to driver layer only if all tsids
+         * within this AC are deleted.
+         */
+    if(!activeTsids) {
+        A_WMI_STREAM_TX_INACTIVE(wmip->wmi_devt, trafficClass);
+        wmip->wmi_fatPipeExists &= ~(1<<trafficClass);
+    }
+
+    return status;
+}
+
+/*
+ * used to set the bit rate.  rate is in Kbps.  If rate == -1
+ * then auto selection is used.
+ */
+A_STATUS
+wmi_set_bitrate_cmd(struct wmi_t *wmip, A_INT32 rate)
+{
+    void *osbuf;
+    WMI_BIT_RATE_CMD *cmd;
+    A_INT8 index;
+
+    if (rate != -1) {
+        index = wmi_validate_bitrate(wmip, rate);
+        if(index == A_EINVAL){
+            return A_EINVAL;
+        }
+    } else {
+        index = -1;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_BIT_RATE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+
+    cmd->rateIndex = index;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BITRATE_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_bitrate_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_BITRATE_CMDID, NO_SYNC_WMIFLAG));
+}
+
+/*
+ * Returns TRUE iff the given rate index is legal in the current PHY mode.
+ */
+A_BOOL
+wmi_is_bitrate_index_valid(struct wmi_t *wmip, A_UINT32 rateIndex)
+{
+    WMI_PHY_MODE phyMode = wmip->wmi_phyMode;
+    A_BOOL isValid = TRUE;
+    switch(phyMode) {
+        case WMI_11A_MODE:
+            if ((rateIndex < MODE_A_SUPPORT_RATE_START) || (rateIndex > MODE_A_SUPPORT_RATE_STOP)) {
+                isValid = FALSE;
+            }
+            break;
+
+        case WMI_11B_MODE:
+            if ((rateIndex < MODE_B_SUPPORT_RATE_START) || (rateIndex > MODE_B_SUPPORT_RATE_STOP)) {
+                isValid = FALSE;
+            }
+            break;
+
+        case WMI_11GONLY_MODE:
+            if ((rateIndex < MODE_GONLY_SUPPORT_RATE_START) || (rateIndex > MODE_GONLY_SUPPORT_RATE_STOP)) {
+                isValid = FALSE;
+            }
+            break;
+
+        case WMI_11G_MODE:
+        case WMI_11AG_MODE:
+            if ((rateIndex < MODE_G_SUPPORT_RATE_START) || (rateIndex > MODE_G_SUPPORT_RATE_STOP)) {
+                isValid = FALSE;
+            }
+            break;
+
+        default:
+            A_ASSERT(FALSE);
+            break;
+    }
+
+    return isValid;
+}
+
+A_INT8
+wmi_validate_bitrate(struct wmi_t *wmip, A_INT32 rate)
+{
+    A_INT8 i;
+    if (rate != -1)
+    {
+        for (i=0;;i++)
+        {
+            if (wmi_rateTable[(A_UINT32) i] == 0) {
+                return A_EINVAL;
+            }
+            if (wmi_rateTable[(A_UINT32) i] == rate) {
+                break;
+            }
+        }
+    }
+    else{
+     i = -1;
+    }
+
+    if(wmi_is_bitrate_index_valid(wmip, i) != TRUE) {
+        return A_EINVAL;
+    }
+
+    return i;
+}
+
+A_STATUS
+wmi_set_fixrates_cmd(struct wmi_t *wmip, A_INT16 fixRatesMask)
+{
+    void *osbuf;
+    WMI_FIX_RATES_CMD *cmd;
+    A_UINT32 rateIndex;
+
+    /* Make sure all rates in the mask are valid in the current PHY mode */
+    for(rateIndex = 0; rateIndex < MAX_NUMBER_OF_SUPPORT_RATES; rateIndex++) {
+       if((1 << rateIndex) & (A_UINT32)fixRatesMask) {
+            if(wmi_is_bitrate_index_valid(wmip, rateIndex) != TRUE) {
+                A_DPRINTF(DBG_WMI, (DBGFMT "Set Fix Rates command failed: Given rate is illegal in current PHY mode\n", DBGARG));
+                return A_EINVAL;
+            }
+       }
+    }
+
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_FIX_RATES_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+
+    cmd->fixRateMask = fixRatesMask;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_FIXRATES_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_ratemask_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_FIXRATES_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_channelList_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_CHANNEL_LIST_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+/*
+ * used to generate a wmi sey channel Parameters cmd.
+ * mode should always be specified and corresponds to the phy mode of the
+ * wlan.
+ * numChan should alway sbe specified. If zero indicates that all available
+ * channels should be used.
+ * channelList is an array of channel frequencies (in Mhz) which the radio
+ * should limit its operation to.  It should be NULL if numChan == 0.  Size of
+ * array should correspond to numChan entries.
+ */
+A_STATUS
+wmi_set_channelParams_cmd(struct wmi_t *wmip, A_UINT8 scanParam,
+                          WMI_PHY_MODE mode, A_INT8 numChan,
+                          A_UINT16 *channelList)
+{
+    void *osbuf;
+    WMI_CHANNEL_PARAMS_CMD *cmd;
+    A_INT8 size;
+
+    size = sizeof (*cmd);
+
+    if (numChan) {
+        if (numChan > WMI_MAX_CHANNELS) {
+            return A_EINVAL;
+        }
+        size += sizeof(A_UINT16) * (numChan - 1);
+    }
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_CHANNEL_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+
+    wmip->wmi_phyMode = mode;
+    cmd->scanParam   = scanParam;
+    cmd->phyMode     = mode;
+    cmd->numChannels = numChan;
+    A_MEMCPY(cmd->channelList, channelList, numChan * sizeof(A_UINT16));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_CHANNEL_PARAMS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_rssi_threshold_params(struct wmi_t *wmip,
+                              WMI_RSSI_THRESHOLD_PARAMS_CMD *rssiCmd)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_RSSI_THRESHOLD_PARAMS_CMD *cmd;
+    /* These values are in ascending order */
+    if( rssiCmd->thresholdAbove6_Val <= rssiCmd->thresholdAbove5_Val ||
+        rssiCmd->thresholdAbove5_Val <= rssiCmd->thresholdAbove4_Val ||
+        rssiCmd->thresholdAbove4_Val <= rssiCmd->thresholdAbove3_Val ||
+        rssiCmd->thresholdAbove3_Val <= rssiCmd->thresholdAbove2_Val ||
+        rssiCmd->thresholdAbove2_Val <= rssiCmd->thresholdAbove1_Val ||
+        rssiCmd->thresholdBelow6_Val <= rssiCmd->thresholdBelow5_Val ||
+        rssiCmd->thresholdBelow5_Val <= rssiCmd->thresholdBelow4_Val ||
+        rssiCmd->thresholdBelow4_Val <= rssiCmd->thresholdBelow3_Val ||
+        rssiCmd->thresholdBelow3_Val <= rssiCmd->thresholdBelow2_Val ||
+        rssiCmd->thresholdBelow2_Val <= rssiCmd->thresholdBelow1_Val) {
+
+        return A_EINVAL;
+    }
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_RSSI_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+    A_MEMCPY(cmd, rssiCmd, sizeof(WMI_RSSI_THRESHOLD_PARAMS_CMD));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_RSSI_THRESHOLD_PARAMS_CMDID,
+                            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_host_sleep_mode_cmd(struct wmi_t *wmip,
+                              WMI_SET_HOST_SLEEP_MODE_CMD *hostModeCmd)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_SET_HOST_SLEEP_MODE_CMD *cmd;
+
+    if( hostModeCmd->awake == hostModeCmd->asleep) {
+        return A_EINVAL;
+    }
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_SET_HOST_SLEEP_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+    A_MEMCPY(cmd, hostModeCmd, sizeof(WMI_SET_HOST_SLEEP_MODE_CMD));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_HOST_SLEEP_MODE_CMDID,
+                            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_wow_mode_cmd(struct wmi_t *wmip,
+                              WMI_SET_WOW_MODE_CMD *wowModeCmd)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_SET_WOW_MODE_CMD *cmd;
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_SET_WOW_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+    A_MEMCPY(cmd, wowModeCmd, sizeof(WMI_SET_WOW_MODE_CMD));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WOW_MODE_CMDID,
+                            NO_SYNC_WMIFLAG));
+
+}
+
+A_STATUS
+wmi_get_wow_list_cmd(struct wmi_t *wmip,
+                              WMI_GET_WOW_LIST_CMD *wowListCmd)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_GET_WOW_LIST_CMD *cmd;
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_GET_WOW_LIST_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+    A_MEMCPY(cmd, wowListCmd, sizeof(WMI_GET_WOW_LIST_CMD));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_WOW_LIST_CMDID,
+                            NO_SYNC_WMIFLAG));
+
+}
+
+static A_STATUS
+wmi_get_wow_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+    WMI_GET_WOW_LIST_REPLY *reply;
+
+    if (len < sizeof(WMI_GET_WOW_LIST_REPLY)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_GET_WOW_LIST_REPLY *)datap;
+
+    A_WMI_WOW_LIST_EVENT(wmip->wmi_devt, reply->num_filters,
+                          reply);
+
+    return A_OK;
+}
+
+A_STATUS wmi_add_wow_pattern_cmd(struct wmi_t *wmip,
+                                 WMI_ADD_WOW_PATTERN_CMD *addWowCmd,
+                                 A_UINT8* pattern, A_UINT8* mask,
+                                 A_UINT8 pattern_size)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_ADD_WOW_PATTERN_CMD *cmd;
+    A_UINT8 *filter_mask = NULL;
+
+    size = sizeof (*cmd);
+
+    size += ((2 * addWowCmd->filter_size)* sizeof(A_UINT8));
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_ADD_WOW_PATTERN_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->filter_list_id = addWowCmd->filter_list_id;
+    cmd->filter_offset = addWowCmd->filter_offset;
+    cmd->filter_size = addWowCmd->filter_size;
+
+    A_MEMCPY(cmd->filter, pattern, addWowCmd->filter_size);
+
+    filter_mask = (A_UINT8*)(cmd->filter + cmd->filter_size);
+    A_MEMCPY(filter_mask, mask, addWowCmd->filter_size);
+
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_WOW_PATTERN_CMDID,
+                            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_del_wow_pattern_cmd(struct wmi_t *wmip,
+                              WMI_DEL_WOW_PATTERN_CMD *delWowCmd)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_DEL_WOW_PATTERN_CMD *cmd;
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_DEL_WOW_PATTERN_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+    A_MEMCPY(cmd, delWowCmd, sizeof(WMI_DEL_WOW_PATTERN_CMD));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_DEL_WOW_PATTERN_CMDID,
+                            NO_SYNC_WMIFLAG));
+
+}
+
+A_STATUS
+wmi_set_snr_threshold_params(struct wmi_t *wmip,
+                             WMI_SNR_THRESHOLD_PARAMS_CMD *snrCmd)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_SNR_THRESHOLD_PARAMS_CMD *cmd;
+    /* These values are in ascending order */
+    if( snrCmd->thresholdAbove4_Val <= snrCmd->thresholdAbove3_Val ||
+        snrCmd->thresholdAbove3_Val <= snrCmd->thresholdAbove2_Val ||
+        snrCmd->thresholdAbove2_Val <= snrCmd->thresholdAbove1_Val ||
+        snrCmd->thresholdBelow4_Val <= snrCmd->thresholdBelow3_Val ||
+        snrCmd->thresholdBelow3_Val <= snrCmd->thresholdBelow2_Val ||
+        snrCmd->thresholdBelow2_Val <= snrCmd->thresholdBelow1_Val) {
+
+        return A_EINVAL;
+    }
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_SNR_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+    A_MEMCPY(cmd, snrCmd, sizeof(WMI_SNR_THRESHOLD_PARAMS_CMD));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SNR_THRESHOLD_PARAMS_CMDID,
+                            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_clr_rssi_snr(struct wmi_t *wmip)
+{
+    void    *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(int));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_CLR_RSSI_SNR_CMDID,
+                            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_lq_threshold_params(struct wmi_t *wmip,
+                             WMI_LQ_THRESHOLD_PARAMS_CMD *lqCmd)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_LQ_THRESHOLD_PARAMS_CMD *cmd;
+    /* These values are in ascending order */
+    if( lqCmd->thresholdAbove4_Val <= lqCmd->thresholdAbove3_Val ||
+        lqCmd->thresholdAbove3_Val <= lqCmd->thresholdAbove2_Val ||
+        lqCmd->thresholdAbove2_Val <= lqCmd->thresholdAbove1_Val ||
+        lqCmd->thresholdBelow4_Val <= lqCmd->thresholdBelow3_Val ||
+        lqCmd->thresholdBelow3_Val <= lqCmd->thresholdBelow2_Val ||
+        lqCmd->thresholdBelow2_Val <= lqCmd->thresholdBelow1_Val ) {
+
+        return A_EINVAL;
+    }
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_LQ_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+    A_MEMCPY(cmd, lqCmd, sizeof(WMI_LQ_THRESHOLD_PARAMS_CMD));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_LQ_THRESHOLD_PARAMS_CMDID,
+                            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_error_report_bitmask(struct wmi_t *wmip, A_UINT32 mask)
+{
+    void    *osbuf;
+    A_INT8  size;
+    WMI_TARGET_ERROR_REPORT_BITMASK *cmd;
+
+    size = sizeof (*cmd);
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_TARGET_ERROR_REPORT_BITMASK *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+
+    cmd->bitmask = mask;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_TARGET_ERROR_REPORT_BITMASK_CMDID,
+                            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_challenge_resp_cmd(struct wmi_t *wmip, A_UINT32 cookie, A_UINT32 source)
+{
+    void *osbuf;
+    WMIX_HB_CHALLENGE_RESP_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMIX_HB_CHALLENGE_RESP_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->cookie = cookie;
+    cmd->source = source;
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_HB_CHALLENGE_RESP_CMDID,
+                              NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_config_debug_module_cmd(struct wmi_t *wmip, A_UINT16 mmask,
+                            A_UINT16 tsr, A_BOOL rep, A_UINT16 size,
+                            A_UINT32 valid)
+{
+    void *osbuf;
+    WMIX_DBGLOG_CFG_MODULE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMIX_DBGLOG_CFG_MODULE_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->config.cfgmmask = mmask;
+    cmd->config.cfgtsr = tsr;
+    cmd->config.cfgrep = rep;
+    cmd->config.cfgsize = size;
+    cmd->config.cfgvalid = valid;
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DBGLOG_CFG_MODULE_CMDID,
+                              NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_stats_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_STATISTICS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_addBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex, A_UINT8 *bssid)
+{
+    void *osbuf;
+    WMI_ADD_BAD_AP_CMD *cmd;
+
+    if ((bssid == NULL) || (apIndex > WMI_MAX_BAD_AP_INDEX)) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_ADD_BAD_AP_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->badApIndex = apIndex;
+    A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_ADD_BAD_AP_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_deleteBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex)
+{
+    void *osbuf;
+    WMI_DELETE_BAD_AP_CMD *cmd;
+
+    if (apIndex > WMI_MAX_BAD_AP_INDEX) {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_DELETE_BAD_AP_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->badApIndex = apIndex;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_BAD_AP_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_txPwr_cmd(struct wmi_t *wmip, A_UINT8 dbM)
+{
+    void *osbuf;
+    WMI_SET_TX_PWR_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_TX_PWR_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->dbM = dbM;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_TX_PWR_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_txPwr_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_TX_PWR_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_switch_radio(struct wmi_t *wmip, A_UINT8 on)
+{
+	WMI_SCAN_PARAMS_CMD scParams = {0, 0, 0, 0, 0,
+					WMI_SHORTSCANRATIO_DEFAULT,
+					DEFAULT_SCAN_CTRL_FLAGS,
+					0};
+
+	if (on) {
+		/* Enable foreground scanning */
+                if (wmi_scanparams_cmd(wmip, scParams.fg_start_period,
+                                       scParams.fg_end_period,
+                                       scParams.bg_period,
+                                       scParams.minact_chdwell_time,
+                                       scParams.maxact_chdwell_time,
+                                       scParams.pas_chdwell_time,
+                                       scParams.shortScanRatio,
+                                       scParams.scanCtrlFlags,
+                                       scParams.max_dfsch_act_time) != A_OK) {
+			return -EIO;
+		}
+	} else {
+		wmi_disconnect_cmd(wmip);
+		if (wmi_scanparams_cmd(wmip, 0xFFFF, 0, 0, 0,
+				       0, 0, 0, 0xFF, 0) != A_OK) {
+			return -EIO;
+		}
+	}
+
+	return A_OK;
+}
+
+
+A_UINT16
+wmi_get_mapped_qos_queue(struct wmi_t *wmip, A_UINT8 trafficClass)
+{
+	A_UINT16 activeTsids=0;
+
+    LOCK_WMI(wmip);
+    activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
+    UNLOCK_WMI(wmip);
+
+    return activeTsids;
+}
+
+A_STATUS
+wmi_get_roam_tbl_cmd(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    osbuf = A_NETBUF_ALLOC(0);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_ROAM_TBL_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_roam_data_cmd(struct wmi_t *wmip, A_UINT8 roamDataType)
+{
+    void *osbuf;
+    A_UINT32 size = sizeof(A_UINT8);
+    WMI_TARGET_ROAM_DATA *cmd;
+
+    osbuf = A_NETBUF_ALLOC(size);      /* no payload */
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_TARGET_ROAM_DATA *)(A_NETBUF_DATA(osbuf));
+    cmd->roamDataType = roamDataType;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_ROAM_DATA_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_roam_ctrl_cmd(struct wmi_t *wmip, WMI_SET_ROAM_CTRL_CMD *p,
+                      A_UINT8 size)
+{
+    void *osbuf;
+    WMI_SET_ROAM_CTRL_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_SET_ROAM_CTRL_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+
+    A_MEMCPY(cmd, p, size);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_ROAM_CTRL_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_powersave_timers_cmd(struct wmi_t *wmip,
+                            WMI_POWERSAVE_TIMERS_POLICY_CMD *pCmd,
+                            A_UINT8 size)
+{
+    void *osbuf;
+    WMI_POWERSAVE_TIMERS_POLICY_CMD *cmd;
+
+    /* These timers can't be zero */
+    if(!pCmd->psPollTimeout || !pCmd->triggerTimeout ||
+       !(pCmd->apsdTimPolicy == IGNORE_TIM_ALL_QUEUES_APSD ||
+         pCmd->apsdTimPolicy == PROCESS_TIM_ALL_QUEUES_APSD) ||
+       !(pCmd->simulatedAPSDTimPolicy == IGNORE_TIM_SIMULATED_APSD ||
+         pCmd->simulatedAPSDTimPolicy == PROCESS_TIM_SIMULATED_APSD))
+        return A_EINVAL;
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, size);
+
+    cmd = (WMI_POWERSAVE_TIMERS_POLICY_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, size);
+
+    A_MEMCPY(cmd, pCmd, size);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+/* Send a command to Target to change GPIO output pins. */
+A_STATUS
+wmi_gpio_output_set(struct wmi_t *wmip,
+                    A_UINT32 set_mask,
+                    A_UINT32 clear_mask,
+                    A_UINT32 enable_mask,
+                    A_UINT32 disable_mask)
+{
+    void *osbuf;
+    WMIX_GPIO_OUTPUT_SET_CMD *output_set;
+    int size;
+
+    size = sizeof(*output_set);
+
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - set=0x%x clear=0x%x enb=0x%x dis=0x%x\n", DBGARG,
+        set_mask, clear_mask, enable_mask, disable_mask));
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+    A_NETBUF_PUT(osbuf, size);
+    output_set = (WMIX_GPIO_OUTPUT_SET_CMD *)(A_NETBUF_DATA(osbuf));
+
+    output_set->set_mask                   = set_mask;
+    output_set->clear_mask                 = clear_mask;
+    output_set->enable_mask                = enable_mask;
+    output_set->disable_mask               = disable_mask;
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_OUTPUT_SET_CMDID,
+                             NO_SYNC_WMIFLAG));
+}
+
+/* Send a command to the Target requesting state of the GPIO input pins */
+A_STATUS
+wmi_gpio_input_get(struct wmi_t *wmip)
+{
+    void *osbuf;
+
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    osbuf = A_NETBUF_ALLOC(0);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_INPUT_GET_CMDID,
+                             NO_SYNC_WMIFLAG));
+}
+
+/* Send a command to the Target that changes the value of a GPIO register. */
+A_STATUS
+wmi_gpio_register_set(struct wmi_t *wmip,
+                      A_UINT32 gpioreg_id,
+                      A_UINT32 value)
+{
+    void *osbuf;
+    WMIX_GPIO_REGISTER_SET_CMD *register_set;
+    int size;
+
+    size = sizeof(*register_set);
+
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - reg=%d value=0x%x\n", DBGARG, gpioreg_id, value));
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+    A_NETBUF_PUT(osbuf, size);
+    register_set = (WMIX_GPIO_REGISTER_SET_CMD *)(A_NETBUF_DATA(osbuf));
+
+    register_set->gpioreg_id               = gpioreg_id;
+    register_set->value                    = value;
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_REGISTER_SET_CMDID,
+                             NO_SYNC_WMIFLAG));
+}
+
+/* Send a command to the Target to fetch the value of a GPIO register. */
+A_STATUS
+wmi_gpio_register_get(struct wmi_t *wmip,
+                      A_UINT32 gpioreg_id)
+{
+    void *osbuf;
+    WMIX_GPIO_REGISTER_GET_CMD *register_get;
+    int size;
+
+    size = sizeof(*register_get);
+
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter - reg=%d\n", DBGARG, gpioreg_id));
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+    A_NETBUF_PUT(osbuf, size);
+    register_get = (WMIX_GPIO_REGISTER_GET_CMD *)(A_NETBUF_DATA(osbuf));
+
+    register_get->gpioreg_id               = gpioreg_id;
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_REGISTER_GET_CMDID,
+                             NO_SYNC_WMIFLAG));
+}
+
+/* Send a command to the Target acknowledging some GPIO interrupts. */
+A_STATUS
+wmi_gpio_intr_ack(struct wmi_t *wmip,
+                  A_UINT32 ack_mask)
+{
+    void *osbuf;
+    WMIX_GPIO_INTR_ACK_CMD *intr_ack;
+    int size;
+
+    size = sizeof(*intr_ack);
+
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter ack_mask=0x%x\n", DBGARG, ack_mask));
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+    A_NETBUF_PUT(osbuf, size);
+    intr_ack = (WMIX_GPIO_INTR_ACK_CMD *)(A_NETBUF_DATA(osbuf));
+
+    intr_ack->ack_mask               = ack_mask;
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_INTR_ACK_CMDID,
+                             NO_SYNC_WMIFLAG));
+}
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+A_STATUS
+wmi_set_access_params_cmd(struct wmi_t *wmip, A_UINT16 txop, A_UINT8 eCWmin,
+                          A_UINT8 eCWmax, A_UINT8 aifsn)
+{
+    void *osbuf;
+    WMI_SET_ACCESS_PARAMS_CMD *cmd;
+
+    if ((eCWmin > WMI_MAX_CW_ACPARAM) || (eCWmax > WMI_MAX_CW_ACPARAM) ||
+        (aifsn > WMI_MAX_AIFSN_ACPARAM))
+    {
+        return A_EINVAL;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_ACCESS_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->txop   = txop;
+    cmd->eCWmin = eCWmin;
+    cmd->eCWmax = eCWmax;
+    cmd->aifsn  = aifsn;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_ACCESS_PARAMS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_retry_limits_cmd(struct wmi_t *wmip, A_UINT8 frameType,
+                         A_UINT8 trafficClass, A_UINT8 maxRetries,
+                         A_UINT8 enableNotify)
+{
+    void *osbuf;
+    WMI_SET_RETRY_LIMITS_CMD *cmd;
+
+    if ((frameType != MGMT_FRAMETYPE) && (frameType != CONTROL_FRAMETYPE) &&
+        (frameType != DATA_FRAMETYPE))
+    {
+        return A_EINVAL;
+    }
+
+    if (maxRetries > WMI_MAX_RETRIES) {
+        return A_EINVAL;
+    }
+
+    if (frameType != DATA_FRAMETYPE) {
+        trafficClass = 0;
+    }
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_RETRY_LIMITS_CMD *)(A_NETBUF_DATA(osbuf));
+    cmd->frameType    = frameType;
+    cmd->trafficClass = trafficClass;
+    cmd->maxRetries   = maxRetries;
+    cmd->enableNotify = enableNotify;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_RETRY_LIMITS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+void
+wmi_get_current_bssid(struct wmi_t *wmip, A_UINT8 *bssid)
+{
+    if (bssid != NULL) {
+        A_MEMCPY(bssid, wmip->wmi_bssid, ATH_MAC_LEN);
+    }
+}
+
+A_STATUS
+wmi_set_opt_mode_cmd(struct wmi_t *wmip, A_UINT8 optMode)
+{
+    void *osbuf;
+    WMI_SET_OPT_MODE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_OPT_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->optMode = optMode;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_OPT_MODE_CMDID,
+                         SYNC_BOTH_WMIFLAG));
+}
+
+A_STATUS
+wmi_opt_tx_frame_cmd(struct wmi_t *wmip,
+                      A_UINT8 frmType,
+                      A_UINT8 *dstMacAddr,
+                      A_UINT8 *bssid,
+                      A_UINT16 optIEDataLen,
+                      A_UINT8 *optIEData)
+{
+    void *osbuf;
+    WMI_OPT_TX_FRAME_CMD *cmd;
+    osbuf = A_NETBUF_ALLOC(optIEDataLen + sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, (optIEDataLen + sizeof(*cmd)));
+
+    cmd = (WMI_OPT_TX_FRAME_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, (optIEDataLen + sizeof(*cmd)-1));
+
+    cmd->frmType    = frmType;
+    cmd->optIEDataLen   = optIEDataLen;
+    //cmd->optIEData     = (A_UINT8 *)((int)cmd + sizeof(*cmd));
+    A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
+    A_MEMCPY(cmd->dstAddr, dstMacAddr, sizeof(cmd->dstAddr));
+    A_MEMCPY(&cmd->optIEData[0], optIEData, optIEDataLen);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_OPT_TX_FRAME_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_adhoc_bconIntvl_cmd(struct wmi_t *wmip, A_UINT16 intvl)
+{
+    void *osbuf;
+    WMI_BEACON_INT_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_BEACON_INT_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->beaconInterval = intvl;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BEACON_INT_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+
+A_STATUS
+wmi_set_voice_pkt_size_cmd(struct wmi_t *wmip, A_UINT16 voicePktSize)
+{
+    void *osbuf;
+    WMI_SET_VOICE_PKT_SIZE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_VOICE_PKT_SIZE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->voicePktSize = voicePktSize;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_VOICE_PKT_SIZE_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+
+A_STATUS
+wmi_set_max_sp_len_cmd(struct wmi_t *wmip, A_UINT8 maxSPLen)
+{
+    void *osbuf;
+    WMI_SET_MAX_SP_LEN_CMD *cmd;
+
+    /* maxSPLen is a two-bit value. If user trys to set anything
+     * other than this, then its invalid
+     */
+    if(maxSPLen & ~0x03)
+        return  A_EINVAL;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_MAX_SP_LEN_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->maxSPLen = maxSPLen;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_MAX_SP_LEN_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_UINT8
+convert_userPriority_to_trafficClass(A_UINT8 userPriority)
+{
+        return  (up_to_ac[userPriority & 0x7]);
+}
+
+A_UINT8
+wmi_get_power_mode_cmd(struct wmi_t *wmip)
+{
+    return wmip->wmi_powerMode;
+}
+
+A_STATUS
+wmi_verify_tspec_params(WMI_CREATE_PSTREAM_CMD *pCmd, A_BOOL tspecCompliance)
+{
+    return A_OK;
+}
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+static A_STATUS
+wmi_tcmd_test_report_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+
+   A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+   A_WMI_TCMD_RX_REPORT_EVENT(wmip->wmi_devt, datap, len);
+
+   return A_OK;
+}
+
+#endif /* CONFIG_HOST_TCMD_SUPPORT*/
+
+A_STATUS
+wmi_set_authmode_cmd(struct wmi_t *wmip, A_UINT8 mode)
+{
+    void *osbuf;
+    WMI_SET_AUTH_MODE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_AUTH_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->mode = mode;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_AUTH_MODE_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_reassocmode_cmd(struct wmi_t *wmip, A_UINT8 mode)
+{
+    void *osbuf;
+    WMI_SET_REASSOC_MODE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_REASSOC_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->mode = mode;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_REASSOC_MODE_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_lpreamble_cmd(struct wmi_t *wmip, A_UINT8 status)
+{
+    void *osbuf;
+    WMI_SET_LPREAMBLE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_LPREAMBLE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->status = status;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_LPREAMBLE_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_rts_cmd(struct wmi_t *wmip, A_UINT16 threshold)
+{
+    void *osbuf;
+    WMI_SET_RTS_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_RTS_CMD*)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->threshold = threshold;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_RTS_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_wmm_cmd(struct wmi_t *wmip, WMI_WMM_STATUS status)
+{
+    void *osbuf;
+    WMI_SET_WMM_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_WMM_CMD*)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->status = status;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WMM_CMDID,
+            NO_SYNC_WMIFLAG));
+
+}
+
+A_STATUS
+wmi_set_wmm_txop(struct wmi_t *wmip, WMI_TXOP_CFG cfg)
+{
+    void *osbuf;
+    WMI_SET_WMM_TXOP_CMD *cmd;
+
+    if( !((cfg == WMI_TXOP_DISABLED) || (cfg == WMI_TXOP_ENABLED)) )
+        return A_EINVAL;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_WMM_TXOP_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->txopEnable = cfg;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WMM_TXOP_CMDID,
+            NO_SYNC_WMIFLAG));
+
+}
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+/* WMI  layer doesn't need to know the data type of the test cmd.
+   This would be beneficial for customers like Qualcomm, who might
+   have different test command requirements from differnt manufacturers
+ */
+A_STATUS
+wmi_test_cmd(struct wmi_t *wmip, A_UINT8 *buf, A_UINT32  len)
+{
+    void *osbuf;
+    char *data;
+
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+    osbuf= A_NETBUF_ALLOC(len);
+    if(osbuf == NULL)
+    {
+        return A_NO_MEMORY;
+    }
+    A_NETBUF_PUT(osbuf, len);
+    data = A_NETBUF_DATA(osbuf);
+    A_MEMCPY(data, buf, len);
+
+    return(wmi_cmd_send(wmip, osbuf, WMI_TEST_CMDID,
+         NO_SYNC_WMIFLAG));
+}
+
+#endif
+
+A_STATUS
+wmi_set_bt_status_cmd(struct wmi_t *wmip, A_UINT8 streamType, A_UINT8 status)
+{
+    void *osbuf;
+    WMI_SET_BT_STATUS_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_BT_STATUS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->streamType = streamType;
+    cmd->status = status;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BT_STATUS_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_bt_params_cmd(struct wmi_t *wmip, WMI_SET_BT_PARAMS_CMD* cmd)
+{
+    void *osbuf;
+    WMI_SET_BT_PARAMS_CMD* alloc_cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    alloc_cmd = (WMI_SET_BT_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(alloc_cmd, sizeof(*cmd));
+    A_MEMCPY(alloc_cmd, cmd, sizeof(*cmd));
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_BT_PARAMS_CMDID,
+            NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_keepalive_configured(struct wmi_t *wmip)
+{
+    void *osbuf;
+    WMI_GET_KEEPALIVE_CMD *cmd;
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+    cmd = (WMI_GET_KEEPALIVE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    return (wmi_cmd_send(wmip, osbuf, WMI_GET_KEEPALIVE_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_UINT8
+wmi_get_keepalive_cmd(struct wmi_t *wmip)
+{
+    return wmip->wmi_keepaliveInterval;
+}
+
+A_STATUS
+wmi_set_keepalive_cmd(struct wmi_t *wmip, A_UINT8 keepaliveInterval)
+{
+    void *osbuf;
+    WMI_SET_KEEPALIVE_CMD *cmd;
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+    cmd = (WMI_SET_KEEPALIVE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd->keepaliveInterval = keepaliveInterval;
+    wmip->wmi_keepaliveInterval = keepaliveInterval;
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_KEEPALIVE_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_appie_cmd(struct wmi_t *wmip, A_UINT8 mgmtFrmType, A_UINT8 ieLen,
+                  A_UINT8 *ieInfo)
+{
+    void *osbuf;
+    WMI_SET_APPIE_CMD *cmd;
+    A_UINT16 cmdLen;
+
+    if (ieLen > WMI_MAX_IE_LEN) {
+        return A_ERROR;
+    }
+    cmdLen = sizeof(*cmd) + ieLen - 1;
+    osbuf = A_NETBUF_ALLOC(cmdLen);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, cmdLen);
+
+    cmd = (WMI_SET_APPIE_CMD *)(A_NETBUF_DATA(osbuf));
+    A_MEMZERO(cmd, cmdLen);
+
+    cmd->mgmtFrmType = mgmtFrmType;
+    cmd->ieLen = ieLen;
+    A_MEMCPY(cmd->ieInfo, ieInfo, ieLen);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_APPIE_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_halparam_cmd(struct wmi_t *wmip, A_UINT8 *cmd, A_UINT16 dataLen)
+{
+    void *osbuf;
+    A_UINT8 *data;
+
+    osbuf = A_NETBUF_ALLOC(dataLen);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, dataLen);
+
+    data = A_NETBUF_DATA(osbuf);
+
+    A_MEMCPY(data, cmd, dataLen);
+
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WHALPARAM_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_INT32
+wmi_get_rate(A_INT8 rateindex)
+{
+    if (rateindex == RATE_AUTO) {
+        return 0;
+    } else {
+        return(wmi_rateTable[(A_UINT32) rateindex]);
+    }
+}
+
+void
+wmi_node_return (struct wmi_t *wmip, bss_t *bss)
+{
+	if (NULL != bss)
+	{
+		wlan_node_return (&wmip->wmi_scan_table, bss);
+	}
+}
+
+bss_t *
+wmi_find_Ssidnode (struct wmi_t *wmip, A_UCHAR *pSsid,
+				   A_UINT32 ssidLength, A_BOOL bIsWPA2)
+{
+	bss_t *node = NULL;
+    node = wlan_find_Ssidnode (&wmip->wmi_scan_table, pSsid,
+							   ssidLength, bIsWPA2);
+	return node;
+}
+
+void
+wmi_free_allnodes(struct wmi_t *wmip)
+{
+	wlan_free_allnodes(&wmip->wmi_scan_table);
+}
+
+bss_t *
+wmi_find_node(struct wmi_t *wmip, const A_UINT8 *macaddr)
+{
+	bss_t *ni=NULL;
+	ni=wlan_find_node(&wmip->wmi_scan_table,macaddr);
+	return ni;
+}
+
+A_STATUS
+wmi_dset_open_reply(struct wmi_t *wmip,
+                    A_UINT32 status,
+                    A_UINT32 access_cookie,
+                    A_UINT32 dset_size,
+                    A_UINT32 dset_version,
+                    A_UINT32 targ_handle,
+                    A_UINT32 targ_reply_fn,
+                    A_UINT32 targ_reply_arg)
+{
+    void *osbuf;
+    WMIX_DSETOPEN_REPLY_CMD *open_reply;
+
+    A_DPRINTF(DBG_WMI, (DBGFMT "Enter - wmip=0x%x\n", DBGARG, (int)wmip));
+
+    osbuf = A_NETBUF_ALLOC(sizeof(*open_reply));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    A_NETBUF_PUT(osbuf, sizeof(*open_reply));
+    open_reply = (WMIX_DSETOPEN_REPLY_CMD *)(A_NETBUF_DATA(osbuf));
+
+    open_reply->status                   = status;
+    open_reply->targ_dset_handle         = targ_handle;
+    open_reply->targ_reply_fn            = targ_reply_fn;
+    open_reply->targ_reply_arg           = targ_reply_arg;
+    open_reply->access_cookie            = access_cookie;
+    open_reply->size                     = dset_size;
+    open_reply->version                  = dset_version;
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DSETOPEN_REPLY_CMDID,
+                             NO_SYNC_WMIFLAG));
+}
+
+static A_STATUS
+wmi_get_pmkid_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, A_UINT32 len)
+{
+    WMI_PMKID_LIST_REPLY *reply;
+    A_UINT32 expected_len;
+
+    if (len < sizeof(WMI_PMKID_LIST_REPLY)) {
+        return A_EINVAL;
+    }
+    reply = (WMI_PMKID_LIST_REPLY *)datap;
+    expected_len = sizeof(reply->numPMKID) + reply->numPMKID * WMI_PMKID_LEN;
+
+    if (len < expected_len) {
+        return A_EINVAL;
+    }
+
+    A_WMI_PMKID_LIST_EVENT(wmip->wmi_devt, reply->numPMKID,
+                           reply->pmkidList);
+
+    return A_OK;
+}
+
+#ifdef CONFIG_HOST_DSET_SUPPORT
+A_STATUS
+wmi_dset_data_reply(struct wmi_t *wmip,
+                    A_UINT32 status,
+                    A_UINT8 *user_buf,
+                    A_UINT32 length,
+                    A_UINT32 targ_buf,
+                    A_UINT32 targ_reply_fn,
+                    A_UINT32 targ_reply_arg)
+{
+    void *osbuf;
+    WMIX_DSETDATA_REPLY_CMD *data_reply;
+    int size;
+
+    size = sizeof(*data_reply) + length;
+
+    A_DPRINTF(DBG_WMI,
+        (DBGFMT "Enter - length=%d status=%d\n", DBGARG, length, status));
+
+    osbuf = A_NETBUF_ALLOC(size);
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+    A_NETBUF_PUT(osbuf, size);
+    data_reply = (WMIX_DSETDATA_REPLY_CMD *)(A_NETBUF_DATA(osbuf));
+
+    data_reply->status                     = status;
+    data_reply->targ_buf                   = targ_buf;
+    data_reply->targ_reply_fn              = targ_reply_fn;
+    data_reply->targ_reply_arg             = targ_reply_arg;
+    data_reply->length                     = length;
+
+    if (status == A_OK) {
+        if (a_copy_from_user(data_reply->buf, user_buf, length)) {
+            return A_ERROR;
+        }
+    }
+
+    return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DSETDATA_REPLY_CMDID,
+                             NO_SYNC_WMIFLAG));
+}
+#endif /* CONFIG_HOST_DSET_SUPPORT */
+
+A_STATUS
+wmi_set_wsc_status_cmd(struct wmi_t *wmip, A_UINT32 status)
+{
+    void *osbuf;
+    char *cmd;
+
+	wps_enable = status;
+
+    osbuf = a_netbuf_alloc(sizeof(1));
+    if (osbuf == NULL) {
+        return A_NO_MEMORY;
+    }
+
+    a_netbuf_put(osbuf, sizeof(1));
+
+    cmd = (char *)(a_netbuf_to_data(osbuf));
+
+    A_MEMZERO(cmd, sizeof(*cmd));
+    cmd[0] = (status?1:0);
+    return (wmi_cmd_send(wmip, osbuf, WMI_SET_WSC_STATUS_CMDID,
+                         NO_SYNC_WMIFLAG));
+}
+
diff --git a/drivers/ar6000/wmi/wmi_doc.h b/drivers/ar6000/wmi/wmi_doc.h
new file mode 100644
index 00000000000..19cd9386cab
--- /dev/null
+++ b/drivers/ar6000/wmi/wmi_doc.h
@@ -0,0 +1,4421 @@
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+
+#if 0
+Wireless Module Interface (WMI) Documentaion
+
+   This section describes the format and the usage model for WMI control and
+   data messages between the host and the AR6000-based targets. The header
+   file include/wmi.h contains all command and event manifest constants as
+   well as structure typedefs for each set of command and reply parameters.
+
+Data Frames
+
+   The data payload transmitted and received by the target follows RFC-1042
+   encapsulation and thus starts with an 802.2-style LLC-SNAP header. The
+   WLAN module completes 802.11 encapsulation of the payload, including the
+   MAC header, FCS, and WLAN security related fields. At the interface to the
+   message transport (HTC), a data frame is encapsulated in a WMI message.
+
+WMI Message Structure
+
+   The WMI protocol leverages an 802.3-style Ethernet header in communicating
+   the source and destination information between the host and the AR6000
+   modules using a 14-byte 802.3 header ahead of the 802.2-style payload. In
+   addition, the WMI protocol adds a header to all data messages:
+
+    {
+    INT8    rssi
+                  The RSSI of the received packet and its units are shown in db above the
+                      noise floor, and the noise floor is shown in dbm.
+    UINT8   info
+                      Contains information on message type and user priority. Message type
+                      differentiates between a data packet and a synchronization message.
+    } WMI_DATA_HDR
+
+   User priority contains the 802.1d user priority info from host to target. Host
+   software translates the host Ethernet format to 802.3 format prior to Tx and
+   802.3 format to host format in the Rx direction. The host does not transmit the
+   FCS that follows the data. MsgType differentiates between a regular data
+   packet (msgType=0) and a synchronization message (msgType=1).
+
+Data Endpoints
+
+   The AR6000 chipset provides several data endpoints to support quality of
+   service (QoS) and maintains separate queues and separate DMA engines for
+   each data endpoint. A data endpoint can be bi-directional.
+
+   Best effort (BE) class traffic uses the default data endpoint (2). The host can
+   establish up to two additional data endpoints for other traffic classes. Once
+   such a data endpoint is established, it sends and receives corresponding QoS
+   traffic in a manner similar to the default data endpoint.
+
+   If QoS is desired over the interconnect, host software must classify each data
+   packet and place it on the appropriate data endpoint. The information
+   required to classify data is generally available in-band as an 802.1p/q style
+   tag or as the ToS field in the IP header. The information may also be available
+   out-of-band depending on the host DDI.
+
+Connection States
+
+   Table B-1 describes the AR6000 WLAN connection states:
+
+   Table B-1.  AR6000 Connection States
+
+Connection State
+    Description
+
+   DISCONNECTED
+    In this state, the AR6000 device is not connected to a wireless
+   network. The device is in this state after reset when it sends the
+   WIRELESS MODULE “READY” EVENT, after it processes a
+   DISCONNECT command, and when it loses its link with the
+   access point (AP) that it was connected to. The device signals a
+   transition to the DISCONNECTED state with a “DISCONNECT”
+   event.
+
+CONNECTED
+    In this state, the AR6000 device is connected to wireless networks.
+   The device enters this state after successfully processing a
+   CONNECT, which establishes a connection with a wireless
+   network. The device signals a transition to the CONNECTED state
+   with a “CONNECT” event.
+
+
+Message Types
+
+   WMI uses commands, replies, and events for the control and configuration of
+   the AR6000 device. The control protocol is asynchronous. Table B-2 describes
+   AR6000 message types:
+
+Table B-2.  AR6000 Message Types
+
+Message Type
+    Description
+
+Commands
+    Control messages that flow from the host to the device
+
+Replies/Events
+    Control messages that flow from the device to the host.
+
+   The device issues a reply to some WMI commands, but not to others.
+   The payload in a reply is command-specific, and some commands do
+   not trigger a reply message at all. Events are control messages issued
+   by the device to signal the occurrence of an asynchronous event.
+
+
+WMI Message Format
+
+   All WMI control commands, replies and events use the header format:
+
+   WMI_CMD_HDR Header Format
+   {
+        UINT16 id
+                 This 16-bit constant identifies which WMI command the host is issuing,
+                 which command the target is replying to, or which event has occurred.
+        WMI_CMD_HDR
+   }
+
+
+   A variable-size command-, reply-, or event-specific payload follows the
+   header. Over the interconnect, all fields in control messages (including
+   WMI_CMD_HDR and the command specific payload) use 32-bit little Endian
+   byte ordering and fields are packed. The AR6000 device always executes
+   commands in order, and the host may send multiple commands without
+   waiting for previous commands to complete. A majority of commands are
+   processed to completion once received. Other commands trigger a longer
+   duration activity whose completion is signaled to the host through an event.
+
+Command Restrictions
+
+   Some commands may only be issued when the AR6000 device is in a certain
+   state. The host is required to wait for an event signaling a state transition
+   before such a command can be issued. For example, if a command requires
+   the device to be in the CONNECTED state, then the host is required to wait
+   for a “CONNECT” event before it issues that command.
+
+   The device ignores any commands inappropriate for its current state. If the
+   command triggers a reply, the device generates an error reply. Otherwise, the
+   device silently ignores the inappropriate command.
+
+Command and Data Synchronization
+
+   WMI provides a mechanism for a host to advise the device of necessary
+   synchronization between commands and data. The device implements
+   synchronization; no implicit synchronization exists between endpoints.
+
+   The host controls synchronization using the “SYNCHRONIZE” command
+   over the control channel and synchronization messages over data channels.
+   The device stops each data channel upon receiving a synchronization message
+   on that channel, processing all data packets received prior to that message.
+   After the device receives synchronization messages for each data endpoint
+   and the “SYNCHRONIZE” command, it resumes all channels.
+
+   When the host must guarantee a command executes before processing new
+   data packets, it first issues the command, then issues the “SYNCHRONIZE”
+   command and sends synchronization messages on data channels. When the
+   host must guarantee the device has processed all old data packets before a
+   processing a new command, it issues a “SYNCHRONIZE” command and
+   synchronization messages on all data channels, then issues the desired
+   command.
+
+
+
+WMI Commands
+
+   ADD_BAD_AP
+    Cause the AR6000 device to avoid a particular AP
+   ADD_CIPHER_KEY
+    Add or replace any of the four AR6000 encryption keys
+   ADD_WOW_PATTERN
+    Used to add a pattern to the WoW pattern list
+   CLR_RSSI_SNR
+    Clear the current calculated RSSI and SNR value
+   CONNECT_CMD
+    Request that the AR6000 device establish a wireless connection
+        with the specified SSID
+   CREATE_PSTREAM
+    Create prioritized data endpoint between the host and device
+   DELETE_BAD_AP
+    Clear an entry in the bad AP table
+   DELETE_CIPHER_KEY
+    Delete a previously added cipher key
+   DELETE_PSTREAM
+    Delete a prioritized data endpoint
+   DELETE_WOW_PATTERN
+    Remove a pre-specified pattern from the WoW pattern list
+   EXTENSION
+    WMI message interface command
+   GET_BIT_RATE
+    Retrieve rate most recently used by the AR6000
+   GET_CHANNEL_LIST
+    Retrieve list of channels used by the AR6000
+   GET_FIXRATES
+    Retrieves the rate-mask set via the SET_FIXRATES command.
+   GET_PMKID_LIST_CMD
+    Retrieve the firmware list of PMKIDs
+   GET_ROAM_DATA
+    Internal use for data collection; available in special build only
+   GET_ROAM_TBL
+    Retrieve the roaming table maintained on the target
+   GET_TARGET_STATS
+    Request that the target send the statistics it maintains
+   GET_TX_PWR
+    Retrieve the current AR6000 device Tx power levels
+   GET_WOW_LIST
+    Retrieve the current list of WoW patterns
+   LQ_THRESHOLD_PARAMS
+    Set the link quality thresholds
+   OPT_TX_FRAME
+    Send a special frame (special feature)
+   RECONNECT
+    Request a reconnection to a BSS
+   RSSI_THRESHOLD_PARAMS
+    Configure how the AR6000 device monitors and reports signal
+       strength (RSSI) of the connected BSS
+   SCAN_PARAMS
+    Determine dwell time and changes scanned channels
+   SET_ACCESS_PARAMS
+    Set access parameters for the wireless network
+   SET_ADHOC_BSSID
+    Set the BSSID for an ad hoc network
+   SET_AKMP_PARAMS
+    Set multiPMKID mode
+   SET_APPIE
+    Add application-specified IE to a management frame
+   SET_ASSOC_INFO
+    Specify the IEs the device should add to association or
+        reassociation requests
+   SET_AUTH_MODE
+    Set 802.11 authentication mode of reconnection
+   SET_BEACON_INT
+    Set the beacon interval for an ad hoc network
+   SET_BIT_RATE
+    Set the AR6000 to a specific fixed bit rate
+   SET_BMISS_TIME
+    Set the beacon miss time
+   SET_BSS_FILTER
+    Inform the AR6000 of network types about which it wants to
+        receive information using a “BSSINFO” event
+   SET_BT_PARAMS
+    Set the status of a Bluetooth stream (SCO or A2DP) or set
+        Bluetooth coexistence register parameters
+   SET_BT_STATUS
+    Set the status of a Bluetooth stream (SCO or A2DP)
+   SET_CHANNEL_PARAMETERS
+    Configure WLAN channel parameters
+   SET_DISC_TIMEOUT
+    Set the amount of time the AR6000 spends attempting to
+        reestablish a connection
+   SET_FIXRATES
+    Set the device to a specific fixed PHY rate (supported subset)
+   SET_HALPARAM
+    Internal AR6000 command to set certain hardware parameters
+   SET_HOST_SLEEP_MODE
+    Set the host mode to asleep or awake
+   SET_IBSS_PM_CAPS
+    Support a non-standard power management scheme for an
+        ad hoc network
+   SET_LISTEN_INT
+    Request a listen interval
+   SET_LPREAMBLE
+    Override the short preamble capability of the AR6000 device
+   SET_MAX_SP_LEN
+    Set the maximum service period
+   SET_OPT_MODE
+    Set the special mode on/off (special feature)
+   SET_PMKID
+    Set the pairwise master key ID (PMKID)
+   SET_PMKID_LIST_CMD
+    Configure the firmware list of PMKIDs
+   SET_POWER_MODE
+    Set guidelines on trade-off between power utilization
+   SET_POWER_PARAMS
+    Configure power parameters
+   SET_POWERSAVE_PARAMS
+    Set the two AR6000 power save timers
+   SET_PROBED_SSID
+    Provide list of SSIDs the device should seek
+   SET_REASSOC_MODE
+    Specify whether the disassociated frame should be sent upon
+        reassociation
+   SET_RETRY_LIMITS
+    Limit how many times the device tries to send a frame
+   SET_ROAM_CTRL
+    Control roaming behavior
+   SET_RTS
+    Determine when RTS should be sent
+   SET_SCAN_PARAMS
+    Set the AR6000 scan parameters
+   SET_TKIP_COUNTERMEASURES
+    Enable/disable reports of TKIP MIC errors
+   SET_TX_PWR
+    Specify the AR6000 device Tx power levels
+   SET_VOICE_PKT_SIZE
+    Set voice packet size
+   SET_WMM
+    Override the AR6000 WMM capability
+   SET_WMM_TXOP
+    Configure TxOP bursting when sending traffic to a WMM-
+    capable AP
+   SET_WOW_MODE
+    Enable/disable WoW mode
+   SET_WSC_STATUS
+    Enable/disable profile check in cserv when the WPS protocol
+    is in progress
+   SNR_THRESHOLD_PARAMS
+    Configure how the device monitors and reports SNR of BSS
+   START_SCAN
+    Start a long or short channel scan
+   SYNCHRONIZE
+    Force a synchronization point between command and data
+    paths
+   TARGET_REPORT_ERROR_BITMASK
+    Control “ERROR_REPORT” events from the AR6000
+
+
+
+
+Name
+    ADD_BAD_AP
+
+Synopsis
+    The host uses this command to cause the AR6000 to avoid a particular AP. The
+    AR6000 maintain a table with up to two APs to avoid. An ADD_BAD_AP command
+    adds or replaces the specified entry in this bad AP table.
+
+    If the AR6000 are currently connected to the AP specified in this command, they
+    disassociate.
+
+Command
+    wmiconfig eth1 --badap <bssid> <badApIndex>
+
+Command Parameters
+    UINT8 badApIndex    Index [0...1] that identifies which entry in the
+                        bad AP table to use
+
+
+    UINT8 bssid[6]  MAC address of the AP to avoid
+
+Command Values
+    badApIndex = 0, 1    Entry in the bad AP table to use
+
+Reset Value
+    The bad AP table is cleared
+
+Restrictions
+    None
+
+See Also
+    “DELETE_BAD_AP” on page B-13
+
+=====================================================================
+Name
+    ADD_CIPHER_KEY
+
+Synopsis
+    The host uses this command to add/replace any of four encryption keys on the
+    AR6000. The ADD_CIPHER_KEY command is issued after the CONNECT event
+    has been received by the host for all dot11Auth modes except for SHARED_AUTH.
+    When the dot11AuthMode is SHARED_AUTH, then the ADD_CIPHER_KEY
+    command should be issued before the “CONNECT” command.
+
+Command
+    wmiconfig eth1 --cipherkey <keyIndex> <keyType> <keyUsage>
+                            <keyLength> <keyopctrl> <keyRSC> <key>
+
+Command Parameters
+    UINT8 keyIndex      Index (0...3) of the key to add/replace;
+                        uniquely identifies the key
+    UINT8 keyType    CRYPTO_TYPE
+    UINT8 keyUsage   Specifies usage parameters of the key when
+                     keyType = WEP_CRYPT
+    UINT8 keyLength  Length of the key in bytes
+    UINT8 keyOpCtrl  bit[0] = Initialize TSC (default),
+                     bit[1] = Initialize RSC
+    UINT8 keyRSC[8]  Key replay sequence counter (RSC) initial
+                     value the device should use
+    UINT8 key[32]    Key material used for this connection
+    Command Values
+    {
+        NONE_CRYPT = 1
+        WEP_CRYPT  = 2
+        TKIP_CRYPT = 3
+        AES_CRYPT  = 4
+        KEY_OP_INIT_TSC   0x01
+        KEY_OP_INIT_RSC   0x02
+        KEY_OP_INIT_VAL   0x03
+                Default is to Initialize the TSC
+        KEY_OP_VALID_MASK 0x04
+                Two operations defined
+    } CRYPTO_TYPE
+
+    {
+        PAIRWISE_USAGE  = 0  Set if the key is used for unicast traffic only
+        GROUP_USAGE     = 1  Set if the key is used to receive multicast
+                              traffic (also set for static WEP keys)
+        TX_USAGE        = 2  Set for the GROUP key used to transmit frames
+                All others are reserved
+    } KEY_USAGE
+
+Reset Value
+    The four available keys are disabled.
+
+Restrictions
+    The cipher should correspond to the encryption mode specified in the “CONNECT”
+    command.
+
+See Also
+    “DELETE_CIPHER_KEY”
+
+=====================================================================
+
+
+Name
+    ADD_WOW_PATTERN
+
+Synopsis
+    The host uses this command to add a pattern to the WoW pattern list; used for
+    pattern-matching for host wakeups by the WoW module. If the host mode is asleep
+    and WoW is enabled, all packets are matched against the existing WoW patterns. If a
+    packet matches any of the patterns specified, the target will wake up the host. All
+    non-matching packets are discarded by the target without being sent up to the host.
+
+Command
+    wmiconfig –addwowpattern <list-id> <filter-size> <filter-offset>
+    <pattern> <mask>
+
+Command Parameters
+    A_UINT8  filter_list_id    ID of the list that is to include the new pattern
+    A_UINT8  filter_size       Size of the new pattern
+    A_UINT8  filter_offset     Offset at which the pattern matching for this
+                                new pattern should begin at
+    A_UINT8  filter[1]         Byte stream that contains both the pattern and
+                                the mask of the new WoW wake-up pattern
+
+Reply Parameters
+    None
+
+Reset Value
+    None defined (default host mode is awake)
+
+Restrictions
+    None
+
+See Also
+    “DELETE_WOW_PATTERN”
+
+=====================================================================
+
+
+Name
+    CLR_RSSI_SNR
+
+Synopsis
+    Clears the current calculated RSSI and SNR value. RSSI and SNR are reported by
+    running-average value. This command will clear the history and have a fresh start
+    for the running-average mechanism.
+
+Command
+    wmiconfig eth1 --cleanRssiSnr
+
+Command Parameters
+    None
+
+Reply Parameters
+    None
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+=====================================================================
+
+Name
+    CONNECT_CMD
+
+Synopsis
+    New connect control information (connectCtrl) is added, with 32 possible modifiers.
+
+    CONNECT_SEND_REASSOC
+        Valid only for a host-controlled connection to a
+        particular AP. If this bit is set, a reassociation frame is
+        sent. If this bit is clear, an association request frame is
+        sent to the AP.
+
+    CONNECT_IGNORE_WPAx_GROUP_CIPHER
+        No group key is issued in the CONNECT command,
+        so use the group key advertised by the AP. In a target-
+        initiated roaming situation this allows a STA to roam
+        between APs that support different multicast ciphers.
+
+    CONNECT_PROFILE_MATCH_DONE
+        In a host-controlled connection case, it is possible that
+        during connect, firmware may not have the
+        information for a profile match (e.g, when the AP
+        supports hidden SSIDs and the device may not
+        transmit probe requests during connect). By setting
+        this bit in the connection control information, the
+        firmware waits for a beacon from the AP with the
+        BSSID supplied in the CONNECT command. No
+        additional profile checks are done.
+
+    CONNECT_IGNORE_AAC_BEACON
+        Ignore the Admission Capacity information in the
+        beacon of the AP
+
+    CONNECT_ASSOC_POLICY_USER
+        When set, the CONNECT_SEND_REASSOC setting
+        determines if an Assoc or Reassoc is sent to an AP
+
+Command
+    wmiconfig --setconnectctrl <ctrl flags bitmask>
+
+Command Parameters
+    typedef struct{
+    A_UINT8 networktype;
+    A_UINT8 dot11authmode;
+    A_UINT8 authmode;
+    A_UINT8 pairwiseCryptoType; /*CRYPTO_TYPE*/
+    A_UINT8 pairwiseCryptoLen;
+    A_UINT8 groupCryptoType; /*CRYPTO_TYPE*/
+    A_UINT8 groupCryptoLen;
+    A_UINT8 ssidLength;
+    A_UCHAR ssid[WMI_MAX_SSID_LEN];
+    A_UINT16 channel;
+    A_UINT8 bssid[AUTH_MAC_LEN];
+    A_UINT8 ctrl_flags; /*WMI_CONNECT_CTRL_FLAGS_BITS*/
+    } WMI_CONNECT_CMD;
+
+    ctrl flags bitmask
+        = 0x0001 CONNECT_ASSOC_POLICY_USER
+            Assoc frames are sent using the policy specified by
+            the flag
+        = 0x0002 CONNECT_SEND_REASSOC
+            Send Reassoc frame while connecting, otherwise send
+            assoc frames
+        = 0x0004 CONNECT_IGNORE_WPAx_GROUP_CIPHER
+            Ignore WPAx group cipher for WPA/WPA2
+        = 0x0008 CONNECT_PROFILE_MATCH_DONE
+            Ignore any profile check
+        = 0x0010 CONNECT_IGNORE_AAC_BEACON
+            Ignore the admission control information in the
+            beacon
+        ... CONNECT_CMD, continued
+        Command Values
+        typedef enum {
+            INFRA_NETWORK       = 0x01,
+            ADHOC_NETWORK       = 0x02,
+            ADHOC_CREATOR       = 0x04,
+        } NETWORK_TYPE;
+
+        typedef enum {
+            OPEN_AUTH           = 0x01,
+            SHARED_AUTH         = 0x02,
+            LEAP_AUTH           = 0x04,
+        } DOT11_AUTH_MODE;
+        typedef enum {
+            NONE_AUTH           = 0x01,
+            WPA_AUTH            = 0x02,
+            WPA_PSK_AUTH        = 0x03,
+            WPA2_AUTH           = 0x04,
+            WPA2_PSK_AUTH       = 0x05,
+            WPA_AUTH_CCKM       = 0x06,
+            WPA2_AUTH_CCKM      = 0x07,
+        } AUTH_MODE;
+        typedef enum {
+            NONE_CRYPT          = 0x01,
+            WEP_CRYPT           = 0x02,
+            TKIP_CRYPT          = 0x03,
+            AES_CRYPT           = 0x04,
+        } CRYPTO_TYPE;
+        typedef enum {
+            CONNECT_ASSOC_POLICY_USER = 0x0001,
+            CONNECT_SEND_REASSOC = 0x0002,
+            CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
+            CONNECT_PROFILE_MATCH_DONE = 0x0008,
+            CONNECT_IGNORE_AAC_BEACON = 0x0010,
+        } WMI_CONNECT_CTRL_FLAGS_BITS;
+
+    pairwiseCryptoLen and groupCryptoLen are valid when the respective
+    CryptoTypesis WEP_CRYPT, otherwise this value should be 0. This is the length in
+    bytes.
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    CREATE_PSTREAM
+
+Synopsis
+    The host uses this command to create a new prioritized data endpoint between the
+    host and the AR6000 device that carries a prioritized stream of data. If the AP that the
+    device connects to requires TSPEC stream establishment, the device requests the
+    corresponding TSPEC with the AP. The maximum and minimum service interval
+    ranges from 0 – 0x7FFFFFFF (ms), where 0 = disabled. The device does not send a
+    reply event for this command, as it is always assumed the command has succeeded.
+    An AP admission control response comes to the host via a WMI_CAC_INDICATION
+    event, once the response for the ADDTS frame comes.
+
+    Examples of cases where reassociation is generated (when WMM) and cases where
+    ADDTS is generated (when WMM and enabling ACM) are when:
+        Changing UAPSD flags in WMM mode, reassociation is generated
+        Changing the interval of sending auto QoS Null frame in WMM mode;
+            reassociation is not generated
+        Issuing a command with same previous parameters in WMM mode and enabling
+            ACM, an ADDTS request is generated
+        Changing the interval of a QoS null frame sending in WMM mode and enabling
+            ACM, an ADDTS request is generated
+        Issuing the command in disconnected state, reassociation or ADDTS is not
+            generated but the parameters are available after (re)association
+
+Command
+    --createqos <user priority> <direction> <traffic class>
+<trafficType> <voice PS capability> <min service interval> <max
+service interval> <inactivity interval> <suspension interval>
+<service start time> <tsid> <nominal MSDU> <max MSDU> <min data
+rate> <mean data rate> <peak data rate> <max burst size> <delay
+bound> <min phy rate> <sba> <medium time> where:
+
+    <user priority>
+    802.1D user priority range (0–7)
+    <direction>
+        = 0    Tx (uplink) traffic
+        = 1    Rx (downlink) traffic
+        = 2    Bi-directional traffic
+    <traffic class>
+        = 1    BK
+        = 2    VI
+        = 3    VO
+    <trafficType>
+        = 0    Aperiodic
+        = 1    Periodic
+    <voice PS capability>
+        Specifies whether the voice power save mechanism
+    (APSD if AP supports it or legacy/simulated APSD
+    [using PS-Poll]) should be used
+        = 0    Disable voice power save for traffic class
+        = 1    Enable APSD voice power save for traffic class
+        = 2    Enable voice power save for all traffic classes
+    <min service interval>
+        (In ms)
+    <max service interval>
+        Inactivity interval (in ms) (0 = Infinite)
+    <suspension interval>
+        (In ms)
+    <service start time>
+        Service start time
+    <tsid>
+        TSID range (0–15)
+    <nominal MSDU>
+        Nominal MAC SDU size
+    <max MSDU>
+        Maximum MAC SDU size
+    <min data rate>
+        Minimum data rate (in bps)
+    <mean data rate>
+        Mean data rate (in bps)
+    <peak data rate>
+        Peak data rate (in bps)
+    <max burst size>
+        Maximum burst size (in bps)
+    <delay bound>
+        Delay bound
+    <min phy rate>
+        Minimum PHY rate (in bps)
+    <sba>
+        Surplus bandwidth allowance
+    <medium time>
+        Medium time in TU of 32-ms periods per sec
+    ... CREATE_PSTREAM (continued)
+
+Command Parameters
+    UINT8 trafficClass    TRAFFIC_CLASS value
+    UINT8 traffic
+    Direction
+    DIR_TYPE value
+    UINT8    rxQueueNum
+        AR6000 device mailbox index (2 or 3)
+        corresponding to the endpoint the host
+        wishes to use to receive packets for the
+        prioritized stream
+    UINT8 trafficType  TRAFFIC_TYPE value
+    UINT8 voicePS
+Capability
+    VOICEPS_CAP_TYPE value
+    UINT8 tsid          Traffic stream ID
+    UINT8 userPriority  802.1D user priority
+    UINT16 nominalMSDU  Nominal MSDU in octets
+    UINT16 maxMSDU      Maximum MSDU in octets
+    UINT32 minServiceInt Minimum service interval: the min.
+                            period of traffic specified (in ms)
+    UINT32 maxServiceInt  Maximum service interval: the max.
+                        period of traffic specified (in ms)
+    UINT32 inactivityInt Indicates how many ms an established
+                        stream is inactive before the prioritized
+                        data endpoint is taken down and the
+                        corresponding T-SPEC deleted
+    UINT32 suspensionInt  Suspension interval (in ms)
+    UINT32 service       StartTime Service start time
+    UINT32 minDataRate  Minimum data rate (in bps)
+    UINT32 meanDataRate Mean data rate (in bps)
+    UINT32 peakDataRate Peak data rate (in bps)
+    UINT32 maxBurstSize
+    UINT32 delayBound
+    UINT32 minPhyRate   Minimum PHY rate for TSPEC (in bps)
+    UINT32 sba          Surplus bandwidth allowance
+    UINT32 mediumTime   Medium TSPEC time (in units of 32 ms)
+Command Values
+    {
+        WMM_AC_BE = 0   Best Effort
+        WMM_AC_BK = 1   Background
+        WMM_AC_VI = 2   Video
+        WMM_AC_VO = 3   Voice
+        All other values reserved
+    } TRAFFIC_CLASS
+    {
+        UPLINK_TRAFFIC   = 0  From the AR6000 device to the AP
+        DOWNLINK_TRAFFIC = 1  From the AP to the AR6000 device
+        BIDIR_TRAFFIC    = 2  Bi-directional traffic
+        All other values reserved
+    } DIR_TYPE
+    {
+        DISABLE_FOR_THIS_AC = 0
+        ENABLE_FOR_THIS_AC  = 1
+        ENABLE_FOR_ALL_AC   = 2
+        All other values reserved
+    } VOICEPS_CAP_TYPE
+
+    ... CREATE_PSTREAM (continued)
+
+
+        VI  BE   BK    Supported, Y/N?
+   0    0    0    0    Y
+   0    0    0    1    Y
+   0    0    1    0    N
+   0    0    1    1    N
+   0    1    0    0    Y
+   0    1    0    1    Y
+   0    1    1    0    N
+   0    1    1    1    N
+   1    0    0    0    Y
+   1    0    0    1    Y
+   1    0    1    0    N
+   1    1    0    0    N
+   1    1    0    1    Y
+   1    1    0    0    N
+   1    1    1    0    N
+   1    1    1    1    Y
+
+Reset Value
+    No pstream is present after reset; each of the BE, BK, VI,VO pstreams must be created
+    (either implicitly by data flow or explicitly by user)
+
+Restrictions
+    This command can only be issued when the device is in the CONNECTED state. If
+    the device receives the command while in DISCONNECTED state, it replies with a
+    failure indication. At most four prioritized data endpoints can be created, one for
+    each AC.
+
+See Also
+    “DELETE_PSTREAM”
+=====================================================================
+
+Name
+    DELETE_BAD_AP
+
+Synopsis
+    The host uses this command to clear a particular entry in the bad AP table
+
+Command
+    wmiconfig eth1 --rmAP [--num=<index>] // used to clear a badAP
+    entry. num is index from 0-3
+
+Command Parameters
+    UINT8  badApIndex   Index [0...n] that identifies the entry in the bad
+                        AP table to delete
+
+Command Values
+    badApIndex   = 0, 1, 2, 3
+            Entry in the bad AP table
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+See Also
+    “ADD_BAD_AP”
+
+=====================================================================
+
+
+Name
+    DELETE_CIPHER_KEY
+
+Synopsis
+    The host uses this command to delete a key that was previously added with the
+    “ADD_CIPHER_KEY” command.
+
+Command
+    TBD
+
+Command Parameters
+    UINT8   keyIndex    Index (0...3) of the key to be deleted
+
+Command Values
+    keyIndex    = 0, 1,2, 3    Key to delete
+
+Reset Value
+    None
+
+Restrictions
+    The host should not delete a key that is currently in use by the AR6000.
+
+See Also
+    “ADD_CIPHER_KEY”
+
+=====================================================================
+
+Name
+    DELETE_PSTREAM
+
+Synopsis
+    The host uses this command to delete a prioritized data endpoint created by a
+    previous “CREATE_PSTREAM” command
+
+Command
+    --deleteqos <trafficClass> <tsid>, where:
+
+    <traffic class>
+        = 0    BE
+        = 1    BK
+        = 2    VI
+        = 3    VO
+    <tsid>
+        The TSpec ID; use the -qosqueue option
+        to get the active TSpec IDs for each traffic class
+
+Command Parameters
+    A_UINT8    trafficClass    Indicate the traffic class of the stream
+                            being deleted
+
+Command Values
+    {
+        WMM_AC_BE = 0    Best effort
+        WMM_AC_BK = 1    Background
+        WMM_AC_VI = 2    Video
+        WMM_AC_VO = 3    Voice
+    } TRAFFIC CLASS
+
+    0-15 for TSID
+
+Reply Values
+    N/A
+
+Restrictions
+    This command should only be issued after a “CREATE_PSTREAM” command has
+    successfully created a prioritized stream
+
+See Also
+    “CREATE_PSTREAM”
+
+=====================================================================
+
+
+Name
+    DELETE_WOW_PATTERN
+
+Synopsis
+    The host uses this command to remove a pre-specified pattern from the
+    WoW pattern list.
+
+Command
+    wmiconfig –delwowpattern <list-id> <pattern-id>
+
+Command Parameters
+    A_UINT8    filter_list_id    ID of the list that contains the WoW filter
+                                 pattern to delete
+    A_UINT8    filter_id    ID of the WoW filter pattern to delete
+
+Reply Parameters
+    None
+
+
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+See Also
+    “ADD_WOW_PATTERN”
+
+=====================================================================
+
+
+Name
+    EXTENSION
+
+Synopsis
+    The WMI message interface is used mostly for wireless control messages to a wireless
+    module applicable to wireless module management regardless of the target platform
+    implementation. However, some commands only peripherally related to wireless
+    management are desired during operation. These wireless extension commands may
+    be platform-specific or implementation-dependent.
+
+Command
+    N/A
+
+Command Parameters
+    Command-specific
+
+Command Values
+    Command-specific
+
+Reply Parameters
+    Command-specific
+
+Reset Values
+    None defined
+
+Restrictions
+    None defined
+
+=====================================================================
+
+
+Name
+    GET_BIT_RATE
+
+Synopsis
+    Used by the host to obtain the rate most recently used by the AR6000 device
+
+Command
+    wmiconfig eth1 --getfixrates
+
+Command Parameters
+    None
+
+
+
+Reply Parameters
+    INT8
+    rateIndex
+    See the “SET_BIT_RATE” command
+
+Reset Values
+    None
+
+Restrictions
+    This command should only be used during development/debug; it is not intended
+for use in production. It is only valid when the device is in the CONNECTED state
+
+See Also
+    “SET_BIT_RATE”
+
+=====================================================================
+
+
+Name
+    GET_CHANNEL_LIST
+
+Synopsis
+    Used by the host uses to retrieve the list of channels that can be used by the device
+    while in the current wireless mode and in the current regulatory domain.
+
+Command
+    TBD
+
+Command Parameters
+    None
+
+Reply Parameters
+    UINT8    reserved    Reserved
+    UINT8    numberOfChannels    Number of channels the reply contains
+    UINT16    channelList[numberOfChannels]  Array of channel frequencies (in MHz)
+
+Reset Values
+    None defined
+
+Restrictions
+    The maximum number of channels that can be reported are 32
+
+=====================================================================
+
+
+Name
+    GET_FIXRATES
+
+Synopsis
+    Clears the current calculated RSSI and SNR value. RSSI and SNR are reported by
+    running-average value. This command will clear the history and have a fresh start for
+    the running-average mechanism.
+
+Synopsis
+    This returns rate-mask set via WMI_SET_FIXRATES to retrieve the current fixed rate
+    that the AR6001 or AR6001 is using. See “SET_FIXRATES”.
+
+Command
+    wmiconfig eth1 --getfixrates
+
+Command Parameters
+    A_UINT16    fixRateMask;    Note: if this command is used prior to
+                using WMI_SET_FIXRATES, AR6000
+                returns 0xffff as fixRateMask, indicating
+                all the rates are enabled
+
+Reply Parameters
+    None
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+See Also
+    “SET_FIXRATES”
+
+=====================================================================
+
+
+
+Name
+    GET_PMKID_LIST_CMD
+
+Synopsis
+    Retrieves the list of PMKIDs on the firmware. The
+    WMI_GET_PMKID_LIST_EVENT is generated by the firmware.
+
+Command
+    TBD
+
+Command Parameters
+
+Reset Values
+    None
+
+Restrictions
+    None
+
+See Also
+    SET_PMKID_LIST_CMD GET_PMKID_LIST_EVENT
+
+=====================================================================
+
+
+Name
+    GET_ROAM_TBL
+
+Synopsis
+    Retrieve the roaming table maintained on the target. The response is reported
+    asynchronously through the ROAM_TBL_EVENT.
+
+Command
+    wmiconfig --getroamtable <roamctrl> <info>
+
+Command Parameters
+    A_UINT8    roamCtrlType;
+    A_UINT16   roamMode
+    A_UINT16   numEntries
+    WMI_BSS_ROAM_INFO bssRoamInfo[1]
+
+Reply Value
+    Reported asynchronously through the ROAM_TBL_EVENT
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+See Also
+    SET_KEEPALIVE
+
+=====================================================================
+
+
+Name
+    GET_TARGET_STATS
+
+Synopsis
+    The host uses this command to request that the target send the statistics that it
+    maintains. The statistics obtained from the target are accrued in the host every time
+    the GET_TARGET_STATS command is issued. The --clearStats option is added to
+    clear the target statistics maintained in the host.
+
+Command
+    wmiconfig --getTargetStats --clearStats
+
+Command Parameters
+    TARGET_STATS    targetStats
+    WMI_TARGET_STATS
+    UINT8   clearStats
+
+
+Reply Value
+    RSSI return value (0–100)
+
+Reset Values
+    All statistics are cleared (zeroed)
+
+Restrictions
+    The --getTargetStats option must be used; the --clearStats option is also available also
+
+
+=====================================================================
+
+Name
+    GET_TX_PWR
+
+Synopsis
+    The host uses this command to retrieve the current Tx power level
+
+Command
+    wmiconfig -i eth1 --getpower
+
+Command Parameters
+    None
+
+Reply Parameters
+    UINT16 dbM    The current Tx power level specified in dbM
+
+Reset Values
+    The maximum permitted by the regulatory domain
+
+Restrictions
+    None
+
+See Also
+    “SET_TX_PWR”
+
+=====================================================================
+
+
+Name
+    GET_WOW_LIST
+
+Synopsis
+    The host uses this command to retrieve the current list of WoW patterns.
+
+Command
+    wmiconfig –getwowlist <list-id>
+
+Command Parameters
+    A_UINT8 filter_list_id    ID of the list of WoW patterns to retrieve
+
+Reply Value(s)
+    A_UINT16  num_filters    Number of WoW patterns contained in the list
+    A_UINT8   wow_mode    Current mode of WoW (enabled or disabled)
+    A_UINT8    host_mode    Current host mode (asleep or awake)
+    WOW_FILTER    wow_filters[1]
+        Contents of the WoW filter pattern list
+        (contains mask, pattern, offset and size
+    information for each of the patterns)
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+See Also
+    “SET_WSC_STATUS”
+
+=====================================================================
+
+
+Name
+    LQ_THRESHOLD_PARAMS
+
+Synopsis
+    Sets Link Quality thresholds, the sampling will happen at every unicast data frame
+    Tx if a certain threshold is met, and the corresponding event will be sent to the host.
+
+Command
+    --lqThreshold <enable> <upper_threshold_1> ...
+    <upper_threshold_4> <lower_threshold_1> ... <lower_threshold_4>
+
+Command Parameters
+    <enable>    = 0    Disable link quality sampling
+                = 1    Enable link quality sampling
+    <upper_threshold_x>  Above thresholds (value in [0,100]), in
+                    ascending order
+    <lower_threshold_x> Below thresholds (value in [0,100]), in
+                    ascending order
+
+Command Values
+    See command parameters
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    OPT_TX_FRAME
+
+Synopsis
+    Special feature, sends a special frame.
+
+Command
+    wmiconfig --sendframe <frmType> <dstaddr> <bssid> <optIEDatalen>
+    <optIEData>
+
+Command Parameters
+    {
+        A_UINT16    optIEDataLen;
+        A_UINT8    frmType;
+        A_UINT8    dstAddr[ATH_MAC_LEN];
+        A_UINT8    bssid[ATH_MAC_LEN];
+        A_UINT8    optIEData[1];
+    } WMI_OPT_TX_FRAME_CMD;
+
+Command Values
+    <frmtype>   = 1    Probe request frame
+                = 2    Probe response frame
+                = 3    CPPP start
+                = 4    CPPP stop
+
+Reset Value
+    None defined
+
+Restrictions
+    Send a special frame only when special mode is on.
+
+=====================================================================
+
+
+Name
+    RECONNECT
+
+Synopsis
+    This command requests a reconnection to a BSS to which the AR6000 device was
+    formerly connected
+
+Command
+    TBD
+
+Command Parameters
+    UINT16    channel    Provides a hint as to which channel was
+                        used for a previous connection
+    UINT8    bssid[6]    If set, indicates which BSSID to connect to
+
+Command Values
+    None
+
+Reset Values
+    None
+
+Restrictions
+    None
+
+See Also
+    “CONNECT_CMD”
+
+=====================================================================
+
+
+Name
+    RSSI_THRESHOLD_PARAMS
+
+Synopsis
+    Configures how the AR6000 device monitors and reports signal strength (RSSI) of the
+    connected BSS, which is used as a link quality metric. The four RSSI threshold sets (in
+    dbM) of the host specification divide the signal strength range into six segments.
+    When signal strength increases or decreases across one of the boundaries, an
+    RSSI_THRESHOLD event is signaled to the host. The host may then choose to take
+    action (such as influencing roaming).
+
+Command
+    wmiconfig eth1 --rssiThreshold <weight> <pollTime>
+        <above_threshold_val_1> ... <above_threshold_tag_6>
+        <above_threshold_val_6>
+        <below_threshold_tag_1> <below_threshold_val_1> ...
+        <below_threshold_tag_6> <below_threshold_val_6>
+
+Command Parameters
+    UINT8    weight    Range in [1, 16] used to calculate average RSSI
+    UINT32   pollTime   RSSI (signal strength) sampling frequency in
+                seconds (if pollTime = 0, single strength
+        sampling is disabled)
+    USER_RSS__THOLD tholds[12]  Thresholds (6 x 2)
+
+Command Values
+    None defined
+
+Reset Values
+    pollTime is 0, and sampling is disabled
+
+Restrictions
+    Can only be issued if the AR6000 device is connected
+
+
+=====================================================================
+
+Name
+    SCAN_PARAMS
+
+Synopsis
+    The minact parameter determines the minimum active channel dwell time, within
+    which if the STA receives any beacon, it remains on that channel until the maxact
+    channel dwell time. If the STA does not receive a beacon within the minact dwell
+    time, it switches to scan the next channel.
+
+Command
+    wmiconfig -scan -minact=<ms> --maxact=<ms>
+
+Command Parameters
+    UINT16    maxact    Channel dwell time (in ms), default = 0
+    UINT16    minact    Channel dwell time (in ms), default = 105
+
+Command Values
+    See channel parameters
+
+Reset Values
+    None defined
+
+Restrictions
+    The minact value should be greater than 0; maxact should be between 5–65535 ms
+    and greater than minact
+
+=====================================================================
+
+
+Name
+    SET_ACCESS_PARAMS
+
+Synopsis
+    Allows the host to set access parameters for the wireless network. A thorough
+    understanding of IEEE 802.11 is required to properly manipulate these parameters.
+
+Command
+    wmiconfig eth1 --acparams --txop <limit> --cwmin <0-15>
+    --cwmax <0-15> --aifsn<0-15>
+
+Command Parameters
+    UINT16    txop    The maximum time (expressed in units of
+                        32 ms) the device can spend transmitting
+                        after acquiring the right to transmit
+    UINT8    eCWmin    Minimum contention window
+    UINT8    eCWmax    Maximum contention window
+    UINT8    aifsn    The arbitration inter-frame space number
+
+Command Values
+    None
+
+Reset Values
+    Reasonable defaults that vary, between endpoints (prioritized streams)
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_ADHOC_BSSID
+
+Synopsis
+    Allows the host to set the BSSID for an ad hoc network. If a network with this BSSID
+    is not found, the target creates an ad hoc network with this BSSID after the connect
+    WMI command is triggered (e.g., by the SIOCSIWESSID IOCTL).
+
+Command
+    wmiconfig eth1 --adhocbssid <bssid>
+
+Command Parameters
+    A_UINT8     bssid[ATH_MAC_LEN]    BSSID is specified in xx:xx:xx:xx:xx:xx format
+
+Command Values
+    None
+
+Reset Values
+    None
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_AKMP_PARAMS
+
+Synopsis
+    Enables or disables multi PMKID mode.
+
+Command
+    wmiconfig eth1 --setakmp --multipmkid=<on/off>
+
+Command Parameters
+    typedef struct {
+      A_UINT32    akmpInfo;
+    } WMI_SET_AKMP_PARAMS_CMD;
+
+Command Values
+    akmpInfo;
+    bit[0] = 0
+        MultiPMKID mode is disabled and PMKIDs that
+        were set using the WMI_SET_PMKID_CMD are
+        used in the [Re]AssocRequest frame.
+     bit[0] = 1
+        MultiPMKID mode is enabled and PMKIDs issued
+        by the WMI_SET_PMKID_LIST_CMD are used in
+        the next [Re]AssocRequest sent to the AP.
+
+Reset Values
+    MultiPMKID mode is disabled
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_APPIE
+
+Synopsis
+    Add an application-specified IE to a management frame. The maximum length is
+    76 bytes. Including the length and the element ID, this translates to 78 bytes.
+
+Command
+    wmiconfig --setappie <frame> <IE>, where:
+
+    frame
+        One of beacon, probe, respon, assoc
+
+    IE
+        A hex string beginning with DD (if = 0, no
+        IE is sent in the management frame)
+
+Command Parameters
+    mgmtFrmType;
+        A WMI_MGMT_FRAME_TYPE
+
+    ieLen;
+        Length of the IE to add to the GMT frame
+
+Command Values
+    None
+
+Reset Value
+    None defined
+
+Restrictions
+    Supported only for the probe request and association request management frame
+types. Also, only one IE can be added per management frame type.
+
+=====================================================================
+
+
+Name
+    SET_ASSOC_INFO
+
+Synopsis
+    The host uses this command to specify any information elements (IEs) it wishes the
+    AR6000 device to add to all future association and reassociation requests. IEs must be
+    correct and are used as is by the device. IEs specified through this command are
+    cleared with a DISCONNECT.
+
+Command
+    wmiconfig eth1 --setAssocIe <IE>
+
+Command Parameters
+    UINT8    ieType    Used directly in 802.11 frames
+    UINT8    bufferSize    Size of assocInfo (in bytes) ranging from
+                        0–240. If = 0, previously set IEs are cleared.
+    UINT8    assocInfo[bufferSize]    Used directly in 802.11 frames
+
+Command Values
+    None
+
+Reset Values
+    IEs are cleared
+
+Restrictions
+    This command can only be issued in the DISCONNECTED state
+
+=====================================================================
+
+
+Name
+    SET_AUTHMODE
+
+Synopsis
+    Sets the 802.11 authentication mode of reconnection
+
+Command
+    wmiconfig eth1 --setauthmode <mode>
+
+Command Parameters
+    UINT8    mode
+
+Command Values
+    mode    = 0x00    Proceed with authentication during reconnect
+            = 0x01    Do not proceed with authentication during reconnect
+
+Reset Values
+    Authentication
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_BEACON_INT
+
+Synopsis
+    Sets the beacon interval for an ad hoc network. Beacon interval selection may have an
+    impact on power savings. To some degree, a longer interval reduces power
+    consumption but also decreases throughput. A thorough understanding of IEEE
+    802.11 ad hoc networks is required to use this command effectively.
+
+Command
+    wmiconfig eth1 --ibssconintv
+
+Command Parameters
+    UINT16    beaconInterval    Specifies the beacon interval in TU units (1024 ms)
+
+Command Values
+    None
+
+Reset Values
+    The default beacon interval is 100 TUs (102.4 ms)
+
+Restrictions
+    This command can only be issued before the AR6000 device starts an ad hoc network
+
+See Also
+    “SET_IBSS_PM_CAPS”
+
+=====================================================================
+
+
+Name
+    SET_BIT_RATE
+
+Synopsis
+    The host uses this command to set the AR6000 device to a specific fixed rate.
+
+Command
+    wmiconfig eth1 --setfixrates <rate_0> ... <rate_n>
+
+Command Parameters
+    INT8    rateIndex
+    A WMI_BIT_RATE value
+    {
+        RATE_AUTO    = -1
+        RATE_1Mb     = 0
+        RATE_2Mb     = 1
+        RATE_5_5M    = 2
+        RATE_11Mb    = 3
+        RATE_6Mb     = 4
+        RATE_9Mb     = 5
+        RATE_12Mb    = 6
+        RATE_18Mb    = 7
+        RATE_24Mb    = 8
+        RATE_36Mb    = 9
+        RATE_48Mb    = 10
+        RATE_54Mb    = 11
+      } WMI_BIT_RATE
+
+
+Command Values
+    See command parameters
+
+Reset Values
+    The dynamic rate is determined by the AR6000 device
+
+Restrictions
+    This command is intended for use only during development/debug; it is not
+intended for use in production
+
+See Also
+    “GET_BIT_RATE”
+
+=====================================================================
+
+
+Name
+    SET_BMISS_TIME
+
+Synopsis
+    This command sets the beacon miss (BMISS) time, which the AR6000 hardware use
+    to recognize missed beacons. When an excessive number (15) of consecutive beacons
+    are missed, the AR6000 consider switching to a different BSS. The time can be
+    specified in number of beacons or in TUs.
+
+Command(s)
+    wmiconfig eth1 --setbmissbeacons=<val>
+    wmiconfig eth1 --setbmisstime=<val>
+
+Command Parameters
+    UINT16    bmissTime    Specifies the beacon miss time
+                            [1000...5000] in TUs (1024 ms)
+    UINT16    bmissbeacons  Specifies the number of beacons [5...50]
+
+Command Values
+    None
+
+Reset Values
+    bmissTime is 1500 TUs (1536 ms)
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_BSS_FILTER
+
+Synopsis
+    The host uses this to inform the AR6000 device of the types of networks about which
+    it wants to receive information from the “BSSINFO” event. As the device performs
+    either foreground or background scans, it applies the filter and sends “BSSINFO”
+    events only for the networks that pass the filter. If any of the  bssFilter or the ieMask
+    filter matches, a BSS Info is sent to the host. The ieMask currently is used as a match
+    for the IEs in the beacons, probe reponses and channel switch action management
+    frame. See also “Scan and Roam” on page C-1.
+
+    The BSS filter command has been enhanced to support IE based filtering. The IEs can
+    be specified as a bitmask through this command using this enum.
+
+Command
+    wmiconfig eth1 –filter = <filter> --ieMask 0x<mask>
+
+Command Parameters
+    UINT8    BssFilter
+
+ Command Values
+    typedef struct {
+        A_UINT8    bssFilter;    See WMI_BSS_FILTER
+        A_UINT32    ieMask;
+    } __ATTRIB_PACK WMI_BSS_FILTER_CMD;
+
+    The ieMask can take this combination of values:
+
+    enum {
+        BSS_ELEMID_CHANSWITCH   = 0x01
+        BSS_ELEMID_ATHEROS      = 0x02,
+    }
+
+Reply Value
+    None
+
+Reset Value
+    BssFilter = NONE_BSS_FILTER (0)
+
+Restrictions
+    None
+
+See Also
+    “CONNECT_CMD”
+
+=====================================================================
+
+
+Name
+    SET_BT_PARAMS
+
+Synopsis
+    This command is used to set the status of a Bluetooth stream or set Bluetooth
+    coexistence register parameters. The stream may be an SCO or an A2DP stream and
+    its status can be started/stopped/suspended/resumed.
+
+Command
+    wmiconfig –setBTparams <paramType> <params>
+
+Command Parameters
+    struct {
+       union {
+            BT_PARAMS_SCO    scoParams;
+            BT_PARAMS_A2DP   a2dpParams;
+            BT_PARAMS_MISC   miscParams;
+            BT_COEX_REGS     regs;
+        } info;
+         A_UINT8 paramType;
+        struct {
+            A_UINT8 noSCOPkts;    Number of SCO packets between consecutive PS-POLLs
+            A_UINT8 pspollTimeout;
+            A_UINT8 stompbt;
+        } BT_PARAMS_SCO;
+        struct {
+            A2DP BT stream parameters
+            A_UINT32   period;
+            A_UINT32   dutycycle;
+            A_UINT8    stompbt;
+        } BT_PARAMS_A2DP;
+        struct {
+            union {
+               WLAN_PROTECT_POLICY_TYPE   protectParams;
+               A_UINT16    wlanCtrlFlags;
+            }info;
+        A_UINT8 paramType;
+        } BT_PARAMS_MISC;
+        struct {
+            BT coexistence registers values
+            A_UINT32    mode;     Coexistence mode
+            A_UINT32    scoWghts; WLAN and BT weights
+            A_UINT32    a2dpWghts;
+            A_UINT32    genWghts;
+            A_UINT32    mode2;    Coexistence mode2
+            A_UINT8    setVal;
+        } BT_COEX_REGS;
+
+Command Values
+    None defined
+
+Reset Value
+    None
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_BT_STATUS
+
+Synopsis
+    Sets the status of a Bluetooth stream. The stream may be a SCO or an A2DP stream
+    and its status can be started/stopped/suspended/resumed.
+
+Command
+    wmiconfig –setBTstatus <streamType> <status>
+
+Command Parameters
+    {
+        A_UINT8        streamType;    Stream type
+        A_UINT8        status;    Stream status
+    }WMI_SET_BT_STATUS_CMD;
+
+Command Values
+    {
+        BT_STREAM_UNDEF    = 0
+        BT_STREAM_SCO
+        SCO stream
+        BT_STREAM_A2DP
+        A2DP stream
+        BT_STREAM_MAX
+    } BT_STREAM_TYPE;
+
+    {
+        BT_STATUS_UNDEF    = 0
+        BT_STATUS_START
+        BT_STATUS_STOP
+        BT_STATUS_RESUME
+        BT_STATUS_SUSPEND
+        BT_STATUS_MAX
+    } BT_STREAM_STATUS;
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_CHANNEL_PARAMETERS
+
+Synopsis
+    Configures various WLAN parameters related to channels, sets the wireless mode,
+    and can restrict the AR6000 device to a subset of available channels. The list of
+    available channels varies depending on the wireless mode and the regulatory
+    domain. The device never operates on a channel outside of its regulatory domain. The
+    device starts to scan the list of channels right after this command.
+
+Command
+    wmiconfig eth1 --wmode <mode> <list>
+
+Command Parameters
+    UINT8    phyMode    See Values below.
+    UINT8    numberOfChannels
+        Number of channels in the channel array that
+        follows. If = 0, then the device uses all of the
+        channels permitted by the regulatory domain
+        and by the specified phyMode.
+    UINT16    channel[numberOfChannels]
+        Array listing the subset of channels (expressed
+        as frequencies in MHz) the host wants the
+        device to use. Any channel not permitted by
+        the specified phyMode or by the specified
+        regulatory domain is ignored by the device.
+
+Command Values
+    phyMode = {
+        Wireless mode
+        11a    = 0x01
+        11g    = 0x02
+        11ag   = 0x03
+        11b    = 0x04
+        11g only    = 0x05
+        }
+
+Reset Values
+    phyMode
+    11ag
+    802.11a/g modules
+        11g
+    802.11g module
+    channels
+        Defaults to all channels permitted by the
+        current regulatory domain.
+
+Restrictions
+    This command, if issued, should be issued soon after reset and prior to the first
+    connection. This command should only be issued in the DISCONNECTED state.
+
+=====================================================================
+
+
+Name
+    SET_DISC_TIMEOUT
+
+Synopsis
+    The host uses this command to configure the amount of time that the AR6000 should
+    spend when it attempts to reestablish a connection after losing link with its current
+    BSS. If this time limit is exceeded, the AR6000 send a “DISCONNECT” event. After
+    sending the “DISCONNECT” event the AR6000 continues to attempt to reestablish a
+    connection, but they do so at the interval corresponding to a foreground scan as
+    established by the “SET_SCAN_PARAMS” command.
+
+    A timeout value of 0 indicates that the AR6000 will disable all autonomous roaming,
+    so that the AR6000 will not perform any scans after sending a “DISCONNECT”
+    event to the host. The state is maintained until a shutdown or host sets different
+    timeout value from 0.
+
+Command
+    wmiconfig eth1 --disc=<timeout in seconds>
+
+Command Parameters
+    UINT8    disconnectTimeout
+        Specifies the time limit (in seconds) after
+        which a failure to reestablish a connection
+        results in a “DISCONNECT” event
+
+Command Values
+    None
+
+Reset Values
+    disconnectTimeout is 10 seconds
+
+Restrictions
+    This command can only be issued while in a DISCONNECTED state
+
+=====================================================================
+
+
+Name
+    SET_FIXRATES
+
+Synopsis
+    By default, the AR6000 device uses all PHY rates based on mode of operation. If the
+    host application requires the device to use subset of supported rates, it can set those
+    rates with this command. In 802.11g mode, the AR6000 device takes the entire
+    802.11g basic rate set and the rates specified with this command and uses it as the
+    supported rate set.
+
+    This rate set is advertised in the probe request and the assoc/re-assoc request as
+    supported rates. Upon successful association, the device modifies the rate set pool
+    using the: intersection of AP-supported rates with the union of the 802.11g basic rate
+    set and rates set using this command. The device picks transmission rates from this
+    pool based on a rate control algorithm.
+
+Command
+    TBD
+
+Command Parameters
+    A_UINT16    fixRateMask;
+        The individual bit is an index for rate table,
+        and setting the that index to 1 would set that
+        corresponding rate. E.g., fixRateMask = 9
+        (1001) sets 1 Mbps and 11 Mbps.
+
+Command Values
+    None
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+See Also
+    “GET_FIXRATES”
+
+=====================================================================
+
+
+Name
+    SET_WHAL_PARAM
+
+Synopsis
+    An internal AR6000 command that is used to set certain hardware parameters. The
+    description of this command is in $WORKAREA/include/halapi.h.
+
+Command
+    TBD
+
+Command Parameters
+    ATH_HAL_SETCABTO_CMDID
+        Sets the timeout waiting for the multicast
+        traffic after a DTIM beacon (in TUs).
+
+Command Values
+    None
+
+Reset Value
+    Default = 10 TUs
+
+Restrictions
+    This command should be executed before issuing a connect command.
+
+=====================================================================
+
+
+Name
+    SET_HOST_SLEEP_MODE
+
+Synopsis
+    The host uses this command to set the host mode to asleep or awake. All packets are
+    delivered to the host when the host mode is awake. When host mode is asleep, only if
+    WoW is enabled and the incoming packet matches one of the specified WoW
+    patterns, will the packet be delivered to the host. The host will also be woken up by
+    the target for pattern-matching packets and important events.
+
+Command
+    wmiconfig –sethostmode=<asleep/awake>
+
+Command Parameters
+    A_BOOL    awake    Set the host mode to awake
+    A_BOOL    asleep   Set the host mode to asleep
+
+Command Values
+    1 = awake, 0 = asleep
+
+Reset Value
+    None defined (default host mode is awake)
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    SET_IBSS_PM_CAPS
+
+Synopsis
+    Used to support a non-standard power management scheme for an ad hoc wireless
+    network consisting of up to eight stations (STAs) that support this form of power
+    saving (e.g., Atheros-based STAs). A thorough understanding of IEEE 802.11 ad hoc
+    networks is required to use this command effectively.
+
+Command
+    wmiconfig eth1 --ibsspmcaps --ps=<enable/disable>
+        --aw=<ATIM Windows in ms>
+        --ttl=<Time to live in number of beacon periods>
+        --to=<timeout in ms>
+
+Command Parameters
+    UINT8    power_saving
+        = 0
+        The non-standard power saving scheme is
+        disabled and maximum throughput (with no
+        power saving) is obtained.
+
+        = 1
+        Ad hoc power saving scheme is enabled (but
+        throughput may be decreased)
+
+    UINT16    atim_windows
+        Specifies the length (in ms) of the ad hoc traffic
+        indication message (ATIM) windows used in an ad
+        hoc network. All Atheros-based STAs that join the
+        network use this duration ATIM window.
+
+    The duration is communicated between wireless
+    STAs through an IE in beacons and probe responses.
+
+    The host sets atim_windows to control trade-offs
+    between power use and throughput. The value
+    chosen should be based on the beacon interval (see
+    the “SET_BEACON_INT” command) on the
+    expected number of STAs in the IBSS, and on the
+    amount of traffic and traffic patterns between STAs.
+
+    UINT16    timeout_value
+        Specifies the timeout (in ms). The value is the same
+        for all ad hoc connections, but tracks separately for
+        each.
+
+        Applicable only for a beacon period and used to
+        derive actual timeout values on the Tx and Rx sides.
+        On the Tx side, the value defines a window during
+        which the STA accepts the frame(s) from the host for a
+        particular connection. Until closed, the window
+        restarts with every frame received from the host. On
+        the Rx side, indicates the time until which the STA
+        continues accepting frames from a particular
+        connection. The value resets with every frame
+        received. The value can be used to determine the
+        trade off between throughput and power.
+        Default = 10 ms
+
+    UINT8    ttl
+        Specifies the value in number of beacon periods. The
+        value is used to set a limit on the time until which a
+        frame is kept alive in the AR6001 before being
+        discarded. Default = 5
+
+Command Values
+    None
+
+Reset Values
+    By default, power_saving is enabled with atim_window = 20 ms
+
+Restrictions
+    Can only be issued before the AR6000 starts an ad hoc network
+
+See Also
+    “SET_BEACON_INT”
+
+=====================================================================
+
+
+
+Name
+    SET_LISTEN_INT
+
+Synopsis
+    The host uses this command to request a listen interval, which determines how often
+    the AR6000 device should wake up and listen for traffic. The listen interval can be set
+    by the TUs or by the number of beacons. The device may not be able to comply with
+    the request (e.g., if the beacon interval is greater than the requested listen interval, the
+    device sets the listen interval to the beacon interval). The actual listen interval used
+    by the device is available in the “CONNECT” event.
+
+Command
+    wmiconfig eth1 --listen=<#of TUs, can range from 15 to 3000>
+
+    --listenbeacons=<#of beacons, can range from 1 to 50>
+
+Command Parameters
+    UINT16    listenInterval
+        Specifies the listen interval in Kms
+        (1024 ms), ranging from 100 to 1000
+
+    UINT16    listenbeacons
+        Specifies the listen interval in beacons,
+        ranging from 1 to 50
+
+Command Values
+    None
+
+Reset Values
+    The device sets the listen interval equal to the beacon interval of the AP it associates
+    to.
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_LPREAMBLE
+
+Synopsis
+    Overrides the short preamble capability of the AR6000 device
+
+Command
+    TBD
+
+Command Parameters
+    WMI_LPREAMBLE_DISABLED
+        The device is short-preamble capable
+
+    WMI_LPREAMBLE_ENABLED
+        The device supports only the long-
+    preamble mode
+
+Command Values
+    None
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    SET_MAX_SP_LEN
+
+Synopsis
+    Set the maximum service period; indicates the number of packets the AR6001 can
+    receive from the AP when triggered
+
+Command
+    wmiconfig eth1 --setMaxSPLength <maxSPLen>
+
+Command Parameters
+    UINT8    maxSPLen
+        An APSD_SP_LEN_TYPE value
+
+Command Values
+    {
+        DELIVER_ALL_PKT  = 0x0
+        DELIVER_2_PKT    = 0x1
+        DELIVER_4_PKT    = 0x2
+        DELIVER_6_PKT    = 0x3
+    }APSD_SP_LEN_TYPE
+
+
+Reset Values
+    maxSPLen is DELIVER_ALL_PKT
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_OPT_MODE
+
+Synopsis
+    Special feature, sets the special mode on/off
+
+Command
+    wmiconfig eth1 --mode <mode>
+    Set the optional mode, where mode is special or off
+
+Command Parameters
+    enum {
+        SPECIAL_OFF
+        SPECIAL_ON
+    } OPT_MODE_TYPE;
+
+Command Values
+
+Reset Value
+    Mode = Off
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_PMKID
+
+Synopsis
+    The host uses this command to enable or disable a pairwise master key ID (PMKID)
+    in the AR6000 PMKID cache. The AR6000 clears its PMKID cache on receipt of a
+    DISCONNECT command from the host. Individual entries in the cache might be
+    deleted as the AR6000 detect new APs and decides to remove old ones.
+
+Command
+    wmiconfig eth1 --setbsspmkid --bssid=<aabbccddeeff>
+    --bsspmkid=<pmkid>
+
+Command Parameters
+    UINT8    bssid[6]
+        The MAC address of the AP that the
+        PMKID corresponds to (6 bytes in hex
+        format)
+
+    UINT8    enable
+        Either PMKID_DISABLE (0) to disable
+        the PMKID or PMKID_ENABLE (1) to
+        enable it (16 bytes in hex format)
+
+    UINT8    pmkid[16]
+        Meaningful only if enable is
+        PMKID_ENABLE, when it is the PMKID
+        that the AR6000 should use on the next
+        reassociation with the specified AP
+
+Command Values
+    enable
+    = 0 (disable), 1 (enable)
+    PKMID enabled/disabled
+
+Reset Values
+    None defined
+
+Restrictions
+    Only supported in infrastructure networks
+
+=====================================================================
+
+
+Name
+    SET_PMKID_LIST_CMD
+
+Synopsis
+    Configures the list of PMKIDs on the firmware.
+
+Command
+    wmiconfig --setpmkidlist --numpmkid=<n> --pmkid=<pmkid_1>
+    ... --pmkid=<pmkid_n>
+
+    Where n is the number of pmkids (maximum = 8) and pmkid_i is the ith pmkid (16
+    bytes in hex format)
+
+Command Parameters
+    {
+        A_UINT8 pmkid[WMI_PMKID_LEN];
+    } __ATTRIB_PACK WMI_PMKID;
+
+    {
+        A_UINT32 numPMKID;
+        WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE];
+    } __ATTRIB_PACK WMI_SET_PMKID_LIST_CMD;
+
+Command Values
+    None
+
+Reset Values
+    None
+
+Restrictions
+    Supported only in infrastructure modes
+
+=====================================================================
+
+
+Name
+    SET_POWER_MODE
+
+Synopsis
+    The host uses this command to provide the AR6000 device with guidelines on the
+    desired trade-off between power utilization and performance.
+
+        In normal power mode, the device enters a sleep state if they have nothing to do,
+        which conserves power but may cost performance as it can take up to 2 ms to
+        resume operation after leaving sleep state.
+
+        In maximum performance mode, the device never enters sleep state, thus no time
+        is spent waking up, resulting in higher power consumption and better
+        performance.
+
+Command
+    TBD
+
+Command Parameters
+    UINT8    powerMode
+        WMI_POWER_MODE value
+    {
+        REC_POWER   = 1
+            (Recommended setting) Tries to conserve
+            power without sacrificing performance
+        MAX_PERF_POWER    = 2
+            Setting that maximizes performance at
+            the expense of power
+
+            All other values are reserved
+    } WMI_POWER_MODE
+
+Command Values
+    See command parameters
+
+Reset Values
+    powerMode is REC_POWER
+
+Restrictions
+    This command should only be issued in the DISCONNECTED state for the
+    infrastructure network.
+
+            For a PM-disabled ad hoc network, the power mode should remain in
+            MAX_PERF_POWER.
+
+            For a PM-enabled ad hoc network, the device can have REC_POWER or
+            MAX_PERF_POWER set, but either way it must follow the power save ad hoc
+            protocol. The host can change power modes in the CONNECTED state.
+
+    Host changes to the PS setting when the STA is off the home channel take no effect
+    and cause a TARGET_PM_FAIL event.
+
+=====================================================================
+
+
+Name
+    SET_POWER_PARAMS
+
+Synopsis
+    The host uses this command to configure power parameters
+
+Command
+    wmiconfig eth1 --pmparams --it=<ms> --np=<number of PS POLL>
+    --dp=<DTIM policy: ignore/normal/stick>
+
+Command Parameters
+    UINT16    idle_period
+        Length of time (in ms) the AR6000 device
+        remains awake after frame Rx/Tx before going
+        to SLEEP state
+
+    UINT16    pspoll_number
+            The number of PowerSavePoll (PS-poll)
+            messages the device should send before
+            notifying the AP it is awake
+
+    UINT16    dtim_policy
+            A WMI_POWER_PARAMS_CMD value
+
+    {
+        IGNORE_DTIM    =1
+            The device does not listen to any content after
+            beacon (CAB) traffic
+        NORMAL_DTIM    = 2
+            DTIM period follows the listen interval (e.g., if
+            the listen interval is 4 and the DTIM period is 2,
+            the device wakes up every fourth beacon)
+        STICK_DTIM    = 3
+            Device attempt to receive all CAB traffic (e.g., if
+            the DTIM period is 2 and the listen interval is 4,
+            the device wakes up every second beacon)
+    } WMI_POWER_PARAMS_CMD
+
+Command Parameters
+    See command parameters
+
+Reset Values
+    idle_period
+        200 ms
+
+    pspoll_number
+    = 1
+
+    dtim_policy
+    = NORMAL_DTIM
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_POWERSAVE_PARAMS
+
+Synopsis
+    Set the two AR6000 power save timers (PS-POLL timer and APSD trigger timer) and
+    the two ASPD TIM policies
+
+Command
+    wmiconfig eth1--psparams --psPollTimer=<psPollTimeout in ms>
+    --triggerTimer=<triggerTimeout in ms> --apsdTimPolicy=<ignore/
+    adhere> --simulatedAPSDTimPolicy=<ignore/adhere>
+
+Command Parameters
+    typedef struct {
+        A_UINT16    psPollTimeout;
+            Timeout (in ms) after sending PS-POLL; the
+            AR6000 device sleeps if it does not receive a
+            data packet from the AP
+
+        A_UINT16    triggerTimeout;
+            Timeout (in ms) after sending a trigger; the
+            device sleeps if it does not receive any data
+            or null frame from the AP
+
+        APSD_TIM_POLICY    apsdTimPolicy;
+            TIM behavior with queue APSD enabled
+
+        APSD_TIM_POLICY    simulatedAPSD
+
+        TimPolicy;
+            TIM behavior with simulated APSD
+            enabled
+
+    typedef enum {
+        IGNORE_TIM_ALL_QUEUES_APSD = 0,
+        PROCESS_TIM_ALL_QUEUES_APSD = 1,
+        IGNORE_TIM_SIMULATED_APSD = 2,
+        POWERSAVE_TIMERS_POLICY = 3,
+    } APSD_TIM_POLICY;
+
+Command Values
+    None
+
+Reset Values
+    psPollTimeout is 50 ms; triggerTimeout is 10 ms;
+    apsdTimPolicy = IGNORE_TIM_ALL_QUEUES_APSD;
+    simulatedAPSDTimPolicy = POWERSAVE_TIMERS_POLICY
+
+Restrictions
+    When this command is used, all parameters must be set; this command does not
+    allow setting only one parameter.
+
+=====================================================================
+
+
+Name
+    SET_PROBED_SSID
+
+Synopsis
+    The host uses this command to provide a list of up to MAX_PROBED_SSID_INDEX
+    (six) SSIDs that the AR6000 device should actively look for. It lists the active SSID
+    table. By default, the device actively looks for only the SSID specified in the
+    “CONNECT_CMD” command, and only when the regulatory domain allows active
+    probing. With this command, specified SSIDs are probed for, even if they are hidden.
+
+Command
+    wmiconfig eth1 --ssid=<ssid> [--num=<index>]
+
+Command Parameters
+    {
+        A_UINT8    numSsids
+            A number from 0 to
+            MAX_PROBED_SSID_INDEX indicating
+            the active SSID table entry index for this
+            command (if the specified entry index
+            already has an SSID, the SSID specified in
+            this command replaces it)
+
+        WMI_PROBED_SSID_INFO    probedSSID[1]
+    } WMI_PROBED_SSID_CMD
+
+    {
+        A_UINT8    flag
+            WMI_SSID_FLAG indicates the current
+            entry in the active SSID table
+        A_UINT8    ssidLength
+            Length of the specified SSID in bytes.
+            If = 0, the entry corresponding to the
+            index is erased
+        A_UINT8    ssid[32]
+            SSID string actively probed for when
+            permitted by the regulatory domain
+    } WMI_PROBED_SSID_INFO
+
+Command Values
+    WMI_SSID_FLAG
+    {
+         DISABLE_SSID_FLAG    = 0
+            Disables entry
+        SPECIFIC_SSID_FLAG    = 1
+            Probes specified SSID
+        ANY_SSID_FLAG    = 2
+            Probes for any SSID
+    } WMI_SSID_FLAG
+
+Reset Value
+    The entries are unused.
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_REASSOC_MODE
+
+Synopsis
+    Specify whether the disassociated frame should be sent or not upon reassociation.
+
+Command
+    wmiconfig eth1 --setreassocmode <mode>
+
+Command Parameters
+    UINT8    mode
+
+Command Values
+    mode
+        = 0x00
+        Send disassoc to a previously connected AP
+        upon reassociation
+        = 0x01
+        Do not send disassoc to previously connected
+        AP upon reassociation
+
+Reset Values
+    None defined
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    SET_RETRY_LIMITS
+
+Synopsis
+    Allows the host to influence the number of times that the AR6000 device should
+    attempt to send a frame before they give up.
+
+Command
+    wmiconfig --setretrylimits <frameType> <trafficClass> <maxRetries>
+    <enableNotify>
+
+Command Parameters
+    {
+        UINT8    frameType
+            A WMI_FRAMETYPE specifying
+            which type of frame is of interest.
+        UINT8    trafficClass
+            Specifies a traffic class (see
+            “CREATE_PSTREAM”). This
+            parameter is only significant when
+            frameType = DATA_FRAMETYPE.
+        UINT8    maxRetries
+            Maximum number of times the
+            device attempts to retry a frame Tx,
+            ranging from WMI_MIN_RETRIES
+            (2) to WMI_MAX_RETRIES (15). If
+            the special value 0 is used,
+            maxRetries is set to 15.
+        A_UINT8    enableNotify
+            Notify when enabled
+    } WMI_RETRY_LIMIT_INFO
+
+    {
+        A_UINT8    numEntries
+        WMI_RETRY_LIMIT_INFO  retryLimitInfo[1]
+    } WMI_SET_RETRY_LIMITS_CMD
+
+Command Values
+    {
+        MGMT_FRAMETYPE    = 0    Management frame
+        CONTROL_FRAMETYPE = 1    Control frame
+        DATA_FRAMETYPE    = 2    Data frame
+    } WMI_FRAMETYPE
+
+Reset Values
+    Retries are set to 15
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_ROAM_CTRL
+
+Synopsis
+    Affects how the AR6000 device selects a BSS. The host uses this command to set and
+    enable low RSSI scan parameters. The time period of low RSSI background scan is
+    mentioned in scan period. Low RSSI scan is triggered when the current RSSI
+    threshold (75% of current RSSI) is equal to or less than scan threshold.
+
+    Low RSSI roam is triggered when the current RSSI threshold falls below the roam
+    threshold and roams to a better AP by the end of the scan cycle. During Low RSSI
+    roam, if the STA finds a new AP with an RSSI greater than roam RSSI to floor, during
+    scan, it roams immediately to it instead of waiting for the end of the scan cycle. See
+    also “Scan and Roam” on page C-1.
+
+Command
+    wmiconfig --roam <roamctrl> <info>, where info is <scan period>
+    <scan threshold> <roam threshold> <roam rssi floor>
+
+Command Parameters
+    A_UINT8    roamCtrlType;
+
+Command Values
+    WMI_FORCE_ROAM     = 1
+    Roam to the specified BSSID
+
+    WMI_SET_ROAM_MODE  = 2
+    Default, progd bias, no roam
+
+    WMI_SET_HOST_BIAS  = 3
+    Set the host bias
+
+    WMI_SET_LOWRSSI_SCAN_PARAMS  = 4
+    Info parameters
+
+    A_UINT8    bssid[ATH_MAC_LEN];
+    WMI_FORCE_ROAM
+
+    A_UINT8    roamMode;
+    WMI_SET_ROAM_MODE
+
+    A_UINT8    bssBiasInfo;
+    WMI_SET_HOST_BIAS
+
+    A_UINT16    lowrssi_scan_period;
+    WMI_SET_LOWRSSI_SCAN_PARAMS
+
+    A_INT16
+    lowrssi_scan_threshold;
+    WMI_SET_LOWRSSI_SCAN_PARAMS
+
+    A_INT16    lowrssi_roam_threshold;
+    WMI_SET_LOWRSSI_SCAN_PARAMS
+
+    A_UINT8    roam_rssi_floor;
+    WMI_SET_LOWRSSI_SCAN_PARAMS
+
+Reset Value
+    None defined (default lowrssi scan is disabled. Enabled only when scan period is set.)
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_RTS
+
+Synopsis
+    Decides when RTS should be sent.
+
+Command
+    wmiconfig eth1 --setRTS <pkt length threshold>
+
+Command Parameters
+    A_UINT16
+    threshold;
+    Command parameter threshold in bytes. An RTS is
+    sent if the data length is more than this threshold.
+    The default is to NOT send RTS.
+
+Command Values
+    None
+
+Reset Value
+    Not to send RTS.
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    SET_SCAN_PARAMS
+
+Synopsis
+    The host uses this command to set the AR6000 scan parameters, including the duty
+    cycle for both foreground and background scanning. Foreground scanning takes
+    place when the AR6000 device is not connected, and discovers all available wireless
+    networks to find the best BSS to join. Background scanning takes place when the
+    device is already connected to a network and scans for potential roaming candidates
+    and maintains them in order of best to worst. A second priority of background
+    scanning is to find new wireless networks.
+
+    The device initiates a scan when necessary. For example, a foreground scan is always
+    started on receipt of a “CONNECT_CMD” command or when the device cannot find
+    a BSS to connect to. Foreground scanning is disabled by default until receipt of a
+    CONNECT command. Background scanning is enabled by default and occurs every
+    60 seconds after the device is connected.
+
+    The device implements a binary backoff interval for foreground scanning when it
+    enters the DISCONNECTED state after losing connectivity with an AP or when a
+    CONNECT command is received. The first interval is ForegroundScanStartPeriod,
+    which doubles after each scan until the interval reaches ForegroundScanEndPeriod.
+    If the host terminates a connection with DISCONNECT, the foreground scan period
+    is ForegroundScanEndPeriod. All scan intervals are measured from the time a full
+    scan ends to the time the next full scan starts. The host starts a scan by issuing a
+    “START_SCAN” command. See also “Scan and Roam” on page C-1.
+
+Command
+    wmiconfig eth1 --scan --fgstart=<sec> --fgend=<sec> --bg=<sec> --
+    act=<msec> --pas=<msec> --sr=<short scan ratio> --scanctrlflags
+    <connScan> <scanConnected> <activeScan> <reportBSSINFO>
+
+Command Parameters
+    UINT16    fgStartPeriod
+        First interval used by the device when it
+        disconnects from an AP or receives a
+        CONNECT command, specified in seconds (0–
+        65535). If = 0, the device uses the reset value.
+        If = 65535, the device disables foreground
+        scanning.
+
+    UINT16    fgEndPeriod
+        The maximum interval the device waits between
+        foreground scans specified in seconds (from
+        ForegroundScanStartPeriod to 65535). If = 0, the
+        device uses the reset value.
+
+    UINT16    bgScanPeriod
+        The period of background scan specified in
+        seconds (0–65535). By default, it is set to the reset
+        value of 60 seconds. If 0 or 65535 is specified, the
+        device disables background scanning.
+
+    UINT16    maxactChDwellTime
+        The period of time the device stays on a
+        particular channel while active scanning. It is
+        specified in ms (10–65535). If the special value of
+        0 is specified, the device uses the reset value.
+
+    UINT16    PasChDwellTime
+        The period of time the device remains on a
+        particular channel while passive scanning. It is
+        specified in ms (10–65535). If the special value of
+        0 is specified, the device uses the reset value.
+
+    UINT8    shortScanRatio
+        Number of short scans to perform for each
+        long scan.
+
+    UINT8    scanCtrlFlasgs
+
+    UINT16    minactChDwellTime
+        Specified in ms
+
+    UINT32    maxDFSchActTime
+        The maximum time a DFS channel can stay
+        active before being marked passive, specified in
+        ms.
+
+Command Values
+    None
+
+Reset Values
+    ForegroundScanStart
+Period
+        1 sec
+
+    ForegroundScanEndPeriod
+        60 sec
+
+    BackgroundScanPeriod
+        60 sec
+
+    ActiveChannelDwellTime
+        105 ms
+
+=====================================================================
+
+
+Name
+    SET_TKIP_COUNTERMEASURES
+
+Synopsis
+    The host issues this command to tell the target whether to enable or disable TKIP
+    countermeasures.
+
+Command
+    TBD
+
+Command Parameters
+    UINT8    WMI_TKIP_CM_ENABLE
+        Enables the countermeasures
+
+
+    UINT8    TKIP_CM_DISABLE
+        Disables the countermeasures
+
+Command Values
+    None
+
+Reset Values
+    By default, TKIP MIC reporting is disabled
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_TX_PWR
+
+Synopsis
+    The host uses this command to specify the Tx power level of the AR6000. Cannot be
+    used to exceed the power limit permitted by the regulatory domain. The maximum
+    output power is limited in the chip to 31.5 dBm; the range is 0 – 31.5 dbm.
+
+Command
+    wmiconfig --power <dbM>
+
+Command Parameters
+    UINT8    dbM
+        The desired Tx power specified in dbM.
+        If = 0, the device chooses the maximum
+        permitted by the regulatory domain.
+
+Command Values
+    None
+
+Reset Values
+    The maximum permitted by the regulatory domain
+
+Restrictions
+    None
+
+See Also
+    “GET_TX_PWR”
+
+
+=====================================================================
+
+Name
+    SET_VOICE_PKT_SIZE
+
+Synopsis
+    If an AP does not support WMM, it has no way to differentiate voice from data.
+    Because the voice packet is typically small, packet in size less than voicePktSize are
+    assumed to be voice, otherwise it is treated as data.
+
+Command
+    wmiconfig eth1 --setVoicePktSize <size-in-bytes>
+
+Command Parameters
+    UINT16    voicePktSize
+        Packet size in octets
+
+Command Values
+    None
+
+Reset Values
+    voicePktSize default is 400 bytes
+
+Restrictions
+    No effect if WMM is unavailable
+
+
+=====================================================================
+
+Name
+    SET_WMM
+
+Synopsis
+    Overrides the AR6000 device WMM capability
+
+Command
+    wmiconfig eth1 --setwmm <enable>
+
+Command Parameters
+    WMI_WMM_ENABLED
+        Enables WMM
+
+    WMI_WMM_DISABLED
+        Disables WMM support
+
+Command Values
+    0 = disabled
+    1 = enabled
+
+Reset Value
+    WMM Disabled
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    SET_WMM_TXOP
+
+Synopsis
+    Configures TxOP Bursting when sending traffic to a WMM capable AP
+
+Command
+    wmiconfig eth1 --txopbursting <burstEnable>
+
+    <burstEnable>
+        = 0
+    Disallow TxOp bursting
+
+        = 1
+    Allow TxOp bursting
+
+Command Parameters
+    txopEnable
+        = WMI_TXOP_DISABLED
+        Disabled
+
+        = WMI_TXOP_ENABLED
+        Enabled
+
+Command Values
+    txopEnable
+        = 0    Disabled
+
+        = 1    Enabled
+
+Reset Value
+    Bursting is off by default
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    SET_WOW_MODE
+
+Synopsis
+    The host uses this command to enable or disable the WoW mode. When WoW mode
+    is enabled and the host is asleep, pattern matching takes place at the target level.
+    Only packets that match any of the pre-specified WoW filter patterns, will be passed
+    up to the host. The host will also be woken up by the target. Packets which do not
+    match any of the WoW patterns are discarded.
+
+Command
+    wmiconfig –setwowmode <enable/disable>
+
+Command Parameters
+    A_BOOL    enable_wow
+        Enable or disable WoW:
+
+Command Values
+        = 0
+    Disable WoW
+
+        = 1
+    Enable WoW
+
+Reset Value
+    None defined (default WoW mode is disabled).
+
+Restrictions
+    None
+
+See Also
+    “GET_WOW_LIST”
+
+
+=====================================================================
+
+Name
+    SET_WSC_STATUS
+
+Synopsis
+    The supplicant uses this command to inform the target about the status of the WSC
+    registration protocol. During the WSC registration protocol, a flag is set so the target
+    bypasses some of the checks in the CSERV module. At the end of the registration, this
+    flag is reset.
+
+Command
+    N/A
+
+Command Parameters
+    A_BOOL status
+        = 1    WSC registration in progress
+        = 0    WSC protocol not running
+
+Reply Parameters
+    None
+
+Reset Value
+    None defined (default = 0)
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    SNR_THRESHOLD_PARAMS
+
+Synopsis
+    Configures how the AR6000 device monitors and reports SNR of the connected BSS,
+    used as a link quality metric.
+
+Command
+    --snrThreshold <weight> <upper_threshold_1> ...
+    <upper_threshold_4> <lower_threshold_1> ... <lower_threshold_4>
+    <pollTimer>
+
+Command Parameters
+    <weight>
+        Share with rssiThreshold. Range in [1, 16], used
+        in the formula to calculate average RSSI
+
+    <upper_threshold_x>
+        Above thresholds expressed in db, in ascending
+        order
+
+    <lower_threshold_x>
+        Below thresholds expressed in db, in ascending
+        order
+
+    <pollTimer>
+        The signal strength sampling frequency in
+        seconds. If polltime = 0, signal strength
+        sampling is disabled
+
+Command Values
+    None
+
+Reset Value
+    None defined
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    START_SCAN
+
+Synopsis
+    The host uses this command to start a long or short channel scan. All future scans are
+    relative to the time the AR6000 device processes this command. The device performs
+    a channel scan on receipt of this command, even if a scan was already in progress.
+    The host uses this command when it wishes to refresh its cached database of wireless
+    networks. The isLegacy field will be removed (0 for now) because it is achieved by
+    setting CONNECT_PROFILE_MATCH_DONE in the CONNECT command. See also
+    “Scan and Roam”
+
+Command
+    wmiconfig eth1 --startscan <scan type> <forcefgscan> 0
+    <homeDwellTime> <forceScanInterval>
+
+Command Parameters
+    UINT8    scanType
+        WMI_SCAN_TYPE
+
+Command Values
+    {
+        WMI_LONG_SCAN    =0x0
+            Requests a full scan
+        WMI_SHORT_SCAN   =0x1
+            Requests a short scan
+    } WMI_SCAN_TYPE
+
+    A_BOOL    forceFgScan
+        forceFgScan
+        = 0
+        Disable the foreground scan
+
+        forceFgScan
+        = 1
+        Forces a foreground scan
+
+    A_UINT32    homeDwellTime
+        Maximum duration in the home
+        channel (in ms)
+
+    A_UINT32     forceScanInterval
+        Time interval between scans (in ms)
+
+    A_UINT32     scanType
+        WMI_SCAN_TYPE
+
+Reset Value
+    Disable forcing foreground scan
+
+Restrictions
+    isLegacy field will no longer be supported (pass as 0 for now)
+
+
+=====================================================================
+
+Name
+    SYNCHRONIZE
+
+Synopsis
+    The host uses this command to force a synchronization point between the command
+    and data paths
+
+Command
+    TBD
+
+Command Parameters
+    None
+
+
+
+Command Values
+    None
+
+
+
+Reset Values
+    None
+
+
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    TARGET_ERROR_REPORT_BITMASK
+
+Synopsis
+    Allows the host to control “ERROR_REPORT” events from the AR6000 device.
+
+        If error reporting is disabled for an error type, a count of errors of that type is
+        maintained by the device.
+
+        If error reporting is enabled for an error type, an “ERROR_REPORT” event is
+        sent when an error occurs and the error report bit is cleared.
+
+    Error counts for each error type are available through the “GET_TARGET_STATS”
+    command.
+
+Command
+    wmiconfig eth1 --setErrorReportingBitmask
+
+Command Parameters
+    UINT32    bitmask
+        Represents the set of
+        WMI_TARGET_ERROR_VAL error types
+        enabled for reporting
+
+Command Values
+    {
+        WMI_TARGET_PM_ERR_FAIL    = 0x00000001
+            Power save fails (only two cases):
+               Retry out of null function/QoS null
+               function to associated AP for PS
+               indication'
+               Host changes the PS setting when
+               STA is off home channel
+
+        WMI_TARGET_KEY_NOT_FOUND    = 0x00000002
+            No cipher key
+        WMI_TARGET_DECRYPTION_ERR   = 0x00000004
+            Decryption error
+        WMI_TARGET_BMISS            = 0x00000008
+            Beacon miss
+        WMI_PSDISABLE_NODE_JOIN     = 0x00000010
+            A non-PS-enabled STA joined the
+            PS-enabled network
+        WMI_TARGET_COM_ERR          = 0x00000020
+            Host/target communication error
+        WMI_TARGET_FATAL_ERR        = 0x00000040
+            Fatal error
+    } WMI_TARGET_ERROR_VAL
+
+Reset Values
+    Bitmask is 0, and all error reporting is disabled
+
+Restrictions
+    None
+
+
+=====================================================================
+WMI Events
+
+Event
+    Description
+    Page
+
+
+BSSINFO
+    Contains information describing BSSs collected during a scan
+
+CAC_EVENTID
+    Indicates signalling events in admission control
+
+CMDERROR
+    The AR6000 device encounters an error while attempting to process
+    a command
+
+CONNECT
+    The device has connected to a wireless network
+
+DISCONNECT
+    The device lost connectivity with a wireless network
+
+ERROR_REPORT
+    An error has occurred for which the host previously requested
+    notification with the command
+    “TARGET_ERROR_REPORT_BITMASK”
+
+EXTENSION
+    WMI extension event
+
+GET_PMKID_LIST_EVENT
+    Created in response to a “GET_PMKID_LIST_CMD” command
+
+GET_WOW_LIST_EVENT
+    Response to the wmiconfig “GET_WOW_LIST” command to
+    retrieve the configured WoW patterns
+
+NEIGHBOR_REPORT
+    Neighbor APs that match the current profile were detected
+
+OPT_RX_FRAME_EVENT
+    (Special feature) informs the host of the reception of a special frame
+
+PSTREAM_TIMEOUT
+    A prioritized stream has been idle for a specified interval
+
+READY
+    The AR6000 device is ready to accept commands
+
+REGDOMAIN
+    The regulatory domain has changed
+
+REPORT_ROAM_DATA_EVENT
+    Reports the roam time calculations made by the device
+    (generated with a special build)
+    —
+
+REPORT_STATISTICS
+    Reply to a “GET_TARGET_STATS” command
+
+ROAM_TBL_EVENT
+    Reports the roam table
+
+RSSI_THRESHOLD
+    Signal strength from the connected AP has crossed the threshold
+    defined in the “RSSI_THRESHOLD_PARAMS” command
+
+SCAN_COMPLETE_EVENT
+    A scan has completed (added status SCAN_ABORTED in release 2.0)
+
+TEST_EVENT
+    Event generated by the TCMD
+
+TKIP_MICERROR
+    TKIP MIC errors were detected
+
+=====================================================================
+
+Name
+    BSSINFO
+
+Synopsis
+    Contains information describing one or more BSSs as collected during a scan.
+    Information includes the BSSID, SSID, RSSI, network type, channel, supported rates,
+    and IEs. BSSINFO events are sent only after the device receives a beacon or probe-
+    response frame that pass the filter specified in the “SET_BSS_FILTER” command.
+    BSSINFO events consist of a small header followed by a copy of the beacon or probe
+    response frame. The 802.11 header is not present. For formats of beacon and probe-
+    response frames please consult the IEEE 802.11 specification.
+
+    The beacons or probe responses containing the IE specified by the
+    WMI_BSS_FILTER_CMD are passed to the host through the
+    WMI_BSSINFO_EVENT. The event carries a 32-bit bitmask that indicates the IEs that
+    were detected in the management frame. The frame type field has been extended to
+    indicate action management frames. This would be helpful to route these frames
+    through the same event mechanism as used by the beacon processing function.
+
+    If the bssFilter in the SET_BSS_FILTER matches, then the ieMask is not relevant
+    because the BSSINFO event is sent to the host. If the bssFilter doesnot match in the
+    beacons/probe respones, then the ieMask match dictates whether the BSSINFO
+    event is sent to the host. In the case of action management frames, the ieMask is the
+    filter that is applied.
+
+Event ID
+    0x1004
+
+Event Parameters
+    typedef struct {
+        A_UINT16    channel;
+            Specifies the frequency (in MHz) where the
+            frame was received
+        A_UINT8    frameType;
+            A WMI_BI_FTYPE value
+        A_UINT8    snr;
+        A_INT16    rssi;
+            Indicates signal strength
+        A_UINT8    bssid[ATH_MAC_LEN];
+        A_UINT32    ieMask;
+    } _ATTRIB_PACK_WMI_BSS_INFO_HDR;
+
+    Beacon or Probe Response Frame
+
+Event Values
+    {
+        BEACON_FTYPE    = 0x1
+            Indicates a beacon frame
+        PROBERESP_FTYPE
+            Indicates a probe response frame
+        ACTION_MGMT_FTYPE
+     } WMI_BI_FTYPE
+
+=====================================================================
+
+Name
+    CAC_EVENTID
+
+Synopsis
+    Indicates signalling events in admission control. Events are generated when
+    admission is accepted, rejected, or deleted by either the host or the AP. If the AP does
+    not respond to an admission request within a timeout of 500 ms, an event is
+    generated to the host.
+
+Event ID
+    0x1011
+
+Event Parameters
+    UINT8
+    ac
+    Access class pertaining to the
+signalling
+
+    UINT8    cac_indication
+        Type of indication; indications are
+        listed in WMI_CAC_INDICATION
+
+    UINT8    statusCode
+        AP response status code for a
+        request
+
+    UINT8    tspecSuggestion[63]
+        Suggested TSPEC from AP
+
+Event Values
+    {
+        CAC_INDICATION_ADMISSION = 0x00
+        CAC_INDICATION_ADMISSION_RESP    = 0x01
+        CAC_INDICATION_DELETE    = 0x02
+        CAC_INDICATION_NO_RESP   = 0x03
+    } WMI_CAC_INDICATION
+
+
+=====================================================================
+
+
+Name
+    CMDERROR
+
+Synopsis
+    Indicates that the AR6000 device encountered an error while attempting to process a
+    command. This error is fatal and indicates that the device requires a reset.
+
+Event ID
+    0x1005
+
+Event Parameters
+    UINT16    commandId
+        Corresponds to the command which generated
+        the error
+    UINT8    errorCode
+        A WMI_ERROR_CODE value
+
+Event Values
+    {
+        INVALID_PARAM    = 1
+            Invalid parameter
+        ILLEGAL_STATE    = 2
+            Illegal state
+        INTERNAL_ERROR   = 3
+            Internal Error
+        All other values reserved
+    } WMI_ERROR_CODE
+
+
+=====================================================================
+
+
+Name
+    CONNECT
+
+Synopsis
+    Signals that the AR6000 connected to a wireless network. Connection occurs due to a
+    “CONNECT” command or roaming to a new AP. For infrastructure networks, shows
+    that the AR6000 successfully performed 802.11 authentication and AP association.
+
+Event ID
+    0x1002
+
+Event Parameters
+    UINT16    channel
+        Channel frequency (in MHz) of the network the
+        AR6000 are connected to
+
+    UINT8    bssid[6]
+        MAC address of the AP the AR6000 are
+        connected to or the BSSID of the ad hoc
+        network
+
+    UINT16    listenInterval
+        Listen interval (in Kms) that the AR6000 are
+        using
+
+    UINT 8    beaconIeLen
+        Length (in bytes) of the beacon IEs
+
+    UINT8    assocInfo
+        Pointer to an array containing beacon IEs,
+        followed first by association request IEs then by
+        association response IEs
+
+    UINT8    assocReqLen
+        Length (in bytes) of the assocReqIEs array
+
+    UINT8    assocRespLen
+        Length (in bytes) of the assocRespIEs array
+
+Event Values
+    None defined
+
+=====================================================================
+
+
+Name
+    DISCONNECT
+
+Synopsis
+    Signals that the AR6000 device lost connectivity with the wireless network.
+    DISCONENCT is generated when the device fails to complete a “CONNECT”
+    command or as a result of a transition from a connected state to disconnected state.
+
+    After sending the “DISCONNECT” event the device continually tries to re-establish
+    a connection. A LOST_LINK occurs when STA cannot receive beacons within the
+    specified time for the SET_BMISS_TIME command.
+
+Event ID
+    0x1003
+
+Event Parameters
+    UINT8    disconnect
+        Reason
+        A WMI_DISCONNECT_REASON value
+
+    UINT8    bssid[6]
+        Indicates which BSS the device was connected to
+
+    UINT8    assocRespLen
+        Length of the 802.11 association response frame
+        that triggered this event, or 0 if not applicable
+
+    UINT8    assocInfo[assocRespLen]
+        Copy of the 802.11 association response frame
+
+Event Values
+    {
+        NO_NETWORK_AVAIL    =0x01
+            Indicates that the device was unable to
+            establish or find the desired network
+        LOST_LINK    =0x02
+            Indicates the devices is no longer receiving
+            beacons from the BSS it was previously
+            connected to
+
+        DISCONNECT_CMD  =0x03
+            Indicates a “DISCONNECT” command was
+            processed
+        BSS_DISCONNECTED =0x04
+            Indicates the BSS explicitly disconnected the
+            device. Possible mechanisms include the AP
+            sending 802.11 management frames
+            (e.g., disassociate or deauthentication
+            messages).
+        AUTH_FAILED    =0x05
+            Indicates that the device failed 802.11
+            authentication with the BSS
+        ASSOC_FAILED    =0x06
+            Indicates that the device failed 802.11
+            association with the BSS
+        NO_RESOURCES_AVAIL    =0x07
+            Indicates that a connection failed because the
+            AP had insufficient resources to complete the
+            connection
+        CSERV_DISCONNECT    =0x08
+            Indicates that the device’s connection services
+            module decided to disconnect from a BSS,
+            which can happen for a variety of reasons (e.g.,
+            the host marks the current connected AP as a
+            bad AP).
+        INVALID_PROFILE    =0x0A
+            Indicates that an attempt was made to
+            reconnect to a BSS that no longer matches the
+            current profile
+        All other values are reserved
+    } WMI_DISCONNECT_REASON
+
+
+=====================================================================
+
+
+Name
+    ERROR_REPORT
+
+Synopsis
+    Signals that a type of error has occurred for which the host previously requested
+    notification through the “TARGET_ERROR_REPORT_BITMASK” command.
+
+Event ID
+    0x100D
+
+Event Parameters
+    UINT32    errorVal
+            WMI_TARGET_ERROR_VAL value. See
+            “TARGET_ERROR_REPORT_BITMASK”.
+
+Event Values
+    errorVal
+    = 0x00000001
+    Power save fails
+
+        = 0x00000002
+    No cipher key
+
+        = 0x00000004
+    Decryption error
+
+        = 0x00000008
+    Beacon miss
+
+        = 0x00000010
+    A non-power save disabled node has joined
+    the PS-enabled network
+
+
+=====================================================================
+
+
+Name
+    EXTENSION
+
+Synopsis
+    The WMI is used mostly for wireless control messages to a wireless module that
+    apply to wireless module management regardless of the target platform
+    implementation. However, some events peripherally related to wireless management
+    are desired during operation. These wireless extension events may be platform-
+    specific or implementation-dependent. See “WMI Extension Commands”
+
+
+Event ID
+    0x1010
+
+
+=====================================================================
+
+
+Name
+    GET_PMKID_LIST_EVENT
+
+Synopsis
+    Generated by firmware in response to a “GET_PMKID_LIST_CMD” command.
+
+Event Parameters
+    typedef struct {
+        A_UINT32    numPMKID;
+            Contains the number of PMKIDs in the reply
+        WMI_PMKID   pmkidList[1];
+    } __ATTRIB_PACK WMI_PMKID_LIST_REPLY;
+
+Event Values
+    None
+
+
+=====================================================================
+
+
+Name
+    GET_WOW_LIST_EVENT
+
+Synopsis
+    Response to the wmiconfig –getwowlist command to retrieve the configured Wake on
+    Wireless patterns
+
+Event ID
+    0x10018
+
+Event Parameters
+    {
+
+    A_UINT8    num_filters
+        Total number of patterns in the list
+    A_UINT8    this_filter_num
+        The filter number
+    A_UINT8    wow_mode
+        Shows whether WoW is enabled or disabled
+    A_UINT8    host_mode
+        Shows whether the host is asleep or awake
+    WOW_FILTER    wow_filters[1]
+        List of WoW filters (pattern and mask data bytes)
+    } WMI_GET_WOW_LIST_REPLY;
+
+    {
+        Each wow_filter_list element shows:
+    A_UINT8    wow_valid_filter
+        Whether the filter is valid
+    A_UINT8    wow_filter_list_id
+        Filter List ID (23 = default)
+    A_UINT8    wow_filter_size
+        Size in bytes of the filter
+    A_UINT8    wow_filter_offset
+        Offset of the pattern to search in the data packet
+    A_UINT8    wow_filter_mask[MASK_SIZE]
+        The mask to be applied to the pattern
+    A_UINT8    wow_filter_pattern[WOW_PATTERN_SIZE]
+        The pattern that to match to wake up the host
+    } WOW_FILTER
+
+Event Values
+    None
+
+=====================================================================
+
+
+
+Name
+    NEIGHBOR_REPORT
+
+Synopsis
+    Indicates the existence of neighbor APs that match the current profile. The host uses
+    this event to populate the PMKID cache on the AR6000 and/or to perform
+    preauthentication. This event is only generated in infrastructure mode.
+
+    A total of numberOfAps pairs of bssid/bssFlags exist, one pair for each AP.
+
+Event ID
+    0x1008
+
+Event Parameters
+    UINT8    numberOfAps
+        The number of APs reported about in
+        this event
+    {
+        UINT8    bssid[6]
+            MAC address of a neighbor AP
+        UINT8    bssFlags
+            A WMI_BSS_FLAGS value
+    }[numberOfAps]
+
+
+Event Values
+    {
+        WMI_DEFAULT_BSS_FLAGS    = 0
+            Logical OR of 1 or more
+        WMI_BSS_FLAGS
+        WMI_PREAUTH_CAPABLE_BSS
+            = 1
+            Indicates that this AP is capable of
+            preauthentication
+        WMI_PMKID_VALID_BSS
+            = 2
+            Indicates that the AR6000 have a
+            valid pairwise master key for this AP
+    } WMI_BSS_FLAGS
+
+
+=====================================================================
+
+
+
+Name
+    OPT_RX_FRAME_EVENT
+
+Synopsis
+    Special feature, informs host of the reception of a special frame.
+
+Event ID
+    0x100E
+
+Event Parameters
+    {
+        A_UINT16    channel;
+        A_UINT8    frameType;
+        A_INT8    snr;
+        A_UINT8    srcAddr[ATH_MAC_LEN];
+        A_UINT8    bssid[ATH_MAC_LEN];
+        }WMI_OPT_RX_INFO_HDR
+
+Event Values
+    None
+
+=====================================================================
+
+
+
+Name
+    PSTREAM_TIMEOUT
+
+Synopsis
+    Indicates that a priority stream that got created as a result of priority-marked data
+    flow (priority marked in IP TOS) being idle for the default inactivity interval period
+    (specified in the “CREATE_PSTREAM” command) used for priority streams created
+    implicitly by the driver. This event is not indicated for user-created priority streams.
+    User-created priority streams exist until the users delete them explicitly. They do not
+    timeout due to data inactivity.
+
+Event ID
+    0x1007
+
+Event Parameters
+    A_UINT8
+    trafficClass
+    Indicated the traffic class of priority
+    stream that timed out
+
+Event Values
+    {
+        WMM_AC_BE    = 0
+            Best effort
+        WMM_AC_BK    = 1
+            Background
+        WMM_AC_VI    = 2
+            Video
+        WMM_AC_VO     = 3
+            Voice
+    } TRAFFIC CLASS
+
+
+=====================================================================
+
+Name
+    READY
+
+Synopsis
+    Indicates that the AR6000 device is prepared to accept commands. It is sent once after
+    power on or reset. It also indicates the MAC address of the device.
+
+Event ID
+    0x1001
+
+Event Parameters
+    UINT8    macAddr[6]
+        Device MAC address
+    UINT8    phyCapability
+        A WMI_PHY_CAPABILITY value. Indicates the
+        capabilities of the device wireless module’s radio
+
+Event Values
+    {
+        WMI_11A_CAPABILITY       = 1
+        WMI_11G_CAPABILITY       = 2
+        WMI_11AG_CAPABILITY      = 3
+    } WMI_PHY_CAPABILITY
+
+
+=====================================================================
+
+Name
+    REGDOMAIN
+
+Synopsis
+    Indicates that the regulatory domain has changed. It initially occurs when the
+    AR6000 device reads the board data information. The regulatory domain can also
+    change when the device is a world-mode SKU. In this case, the regulatory domain is
+    based on the country advertised by APs per the IEEE 802.11d specification. A
+    potential side effect of a regulatory domain change is a change in the list of available
+    channels. Any channel restrictions that exist as a result of a previous
+    “SET_CHANNEL_PARAMETERS” command are lifted.
+
+Event ID
+    0x1006
+
+Event Parameters
+    UINT32    regDomain
+        The range of 0x0000 – 0x00FF
+        corresponds to an ISO country code.
+
+    Other regCodes are reserved for world
+    mode settings and specific regulatory
+    domains.
+
+Event Values
+    None
+
+
+=====================================================================
+
+
+
+Name
+    REPORT_STATISTICS
+
+Synopsis
+    A reply to a “GET_TARGET_STATS” command.
+
+Event ID
+    0x100B
+
+Event Parameters
+    When the statistics are sent to the host, the AR6001 clear them so that a new set of
+    statistics are collected for the next report.
+
+    UINT32    tx_packets
+    UINT32    tx_bytes
+    UINT32    tx_unicast_pkts
+    UINT32    tx_unicast_bytes
+    UINT32    tx_multicast_pkts
+    UINT32    tx_multicast_bytes
+    UINT32    tx_broadcast_pkts
+    UINT32    tx_broadcast_bytes
+    UINT32    tx_rts_success_cnt
+    UINT32    tx_packet_per_ac[4]
+        Tx packets per AC: [0] = BE, [1] = BK,
+        [2] = VI, [3] = VO
+    UINT32    tx_errors
+        Number of packets which failed Tx, due
+        to all failures
+    ... REPORT_STATISTICS, continued
+    UINT32    tx_failed_cnt
+        Number of data packets that failed Tx
+    UINT32    tx_retry_cnt
+        Number of Tx retries for all packets
+    UINT32    tx_rts_fail_cnt
+        Number of RTS Tx failed count
+    UINT32    rx_packets
+    UINT32    rx_bytes
+    UINT32    rx_unicast_pkts
+    UINT32    rx_unicast_bytes
+    UINT32    rx_multicast_pkts
+    UINT32    rx_multicast_bytes
+    UINT32    rx_broadcast_pkts
+    UINT32    rx_broadcast_bytes
+    UINT32    rx_fragment_pkt
+        Number of fragmented packets received
+    UINT32    rx_errors
+        Number of Rx errors due to all failures
+    UINT32    rx_crcerr
+        Number of Rx errors due to CRC errors
+    UINT32    rx_key_cache_miss
+        Number of Rx errors due to a key not
+        being plumbed
+    UINT32    rx_decrypt_err
+        Number of Rx errors due to decryption
+        failure
+    UINT32    rx_duplicate_frames
+        Number of duplicate frames received
+    UINT32    tkip_local_mic_failure
+        Number of TKIP MIC errors detected
+    UINT32    tkip_counter_measures_invoked
+        Number of times TKIP countermeasures
+        were invoked
+    UINT32    tkip_replays
+        Number of frames that replayed a TKIP
+        encrypted frame received earlier
+    UINT32    tkip_format_errors
+        Number of frames that did not conform
+        to the TKIP frame format
+    UINT32    ccmp_format_errors
+        Number of frames that did not conform
+        to the CCMP frame format
+    UINT32    ccmp_replays
+        Number of frames that replayed a CCMP
+        encrypted frame received earlier
+    UINT32    power_save_failure_cnt
+        Number of failures that occurred when
+        the AR6001 could not go to sleep
+    UINT32    cs_bmiss_cnt
+        Number of BMISS interrupts since
+    connection
+    UINT32    cs_lowRssi_cnt
+        Number of the times the RSSI went below
+        the low RSSI threshold
+    UINT16    cs_connect_cnt
+        Number of connection times
+    UINT16    cs_disconnect_cnt
+        Number of disconnection times
+    UINT8    cs_aveBeacon_rssi
+        The current averaged value of the RSSI
+        from the beacons of the connected BSS
+    UINT8    cs_lastRoam_msec
+        Time that the last roaming took, in ms.
+        This time is the difference between
+        roaming start and actual connection.
+
+Event Values
+    None defined
+
+
+=====================================================================
+
+Name
+    ROAM_TBL_EVENT
+
+Synopsis
+    Reports the roam table, which contains the current roam mode and this information
+    for every BSS:
+
+Event ID
+    0x100F
+
+Event Parameters
+    A_UINT8     bssid[ATH_MAC_LEN];
+        BSSID
+    A_UINT8     rssi
+        Averaged RSSI
+    A_UINT8     rssidt
+        Change in RSSI
+    A_UINT8     last_rssi
+        Last recorded RSSI
+    A_UINT8     roam_util
+        Utility value used in roaming decision
+    A_UINT8     util
+        Base utility with the BSS
+    A_UINT8     bias
+        Host configured for this BSS
+
+Event Values
+    roamMode
+        Current roam mode
+
+        = 1
+    RSSI based roam
+
+        = 2
+    Host bias-based roam
+
+        = 3
+    Lock to the current BSS
+
+        = 4
+    Autonomous roaming disabled
+
+
+=====================================================================
+
+Name
+    RSSI_THRESHOLD
+
+Synopsis
+    Alerts the host that the signal strength from the connected AP has crossed a
+    interesting threshold as defined in a previous “RSSI_THRESHOLD_PARAMS”
+    command.
+
+Event ID
+    0x100C
+
+Event Parameters
+    UINT8    range
+        A WMI_RSSI_THRESHOLD_VAL
+        value, which indicates the range of
+        the average signal strength
+
+Event Values
+    {
+        WMI_RSSI_LOWTHRESHOLD_BELOW_LOWERVAL  = 1
+        WMI_RSSI_LOWTHRESHOLD_LOWERVAL        = 2
+        WMI_RSSI_LOWTHRESHOLD_UPPERVAL        = 3
+        WMI_RSSI_HIGHTHRESHOLD_LOWERVAL       = 4
+        WMI_RSSI_HIGHTHRESHOLD_HIGHERVAL      = 5
+    } WMI_RSSI_THRESHOLD_VAL
+
+
+=====================================================================
+
+Name
+    SCAN_COMPLETE_EVENT
+
+Synopsis
+    Indicates the scan status. if the Scan was not completed, this event is generated with
+    the status A_ECANCELED.
+
+Event ID
+    0x100A
+
+Event Parameters
+    A_UINT8    scanStatus
+
+Event Values
+    {
+        #define     SCAN_ABORTED 16
+        #define     SCAN_COMPLETED 0
+        A_UINT8     scanStatus
+            A_OK or A_ECANCELED
+    } WMI_SCAN_COMPLETE_EVENT;
+
+
+=====================================================================
+
+Name
+    TEST_EVENT
+
+Synopsis
+    The TCMD application uses a single WMI event (WMI_TEST_EVENTID) to
+    communicate events from target to host. The events are parsed by the TCMD
+    application and WMI layer is oblivious of it.
+
+Event ID
+    0x1016
+
+Event Parameters
+    WMI_TEST_EVENTID
+
+
+Event Values
+    None
+
+
+=====================================================================
+
+
+
+Name
+    TKIP_MICERR
+
+Synopsis
+    Indicates that TKIP MIC errors were detected.
+
+Event ID
+    0x1009
+
+Event Parameters
+    UINT8    keyid
+        Indicates the TKIP key ID
+
+    UINT8    ismcast
+        0 = Unicast
+        1 = Multicast
+
+Event Values
+    See event parameters
+
+=====================================================================
+
+WMI Extension Commands
+
+The WMI EXTENSION command is used to multiplex a collection of
+commands that:
+
+        Are not generic wireless commands
+        May be implementation-specific
+        May be target platform-specific
+        May be optional for a host implementation
+
+    An extension command is sent to the AR6000 targets like any other WMI
+command message and uses the WMI_EXTENSION. The first field of the
+payload for this EXTENSION command is another commandId, sometimes
+called the subcommandId, which indicates which extension command is
+being used. A subcommandId-specific payload follows the subcommandId.
+
+All extensions (subcommandIds) are listed in the header file include/wmix.h.
+See also “WMI Extension Events” on page B-58.
+
+
+WMI Extension Commands
+
+
+GPIO_INPUT_GET
+    Read GPIO pins configured for input
+
+GPIO_INTR_ACK
+    Acknowledge and re-arm GPIO interrupts reported earlier
+
+GPIO_OUTPUT_SET
+    Manage output on GPIO pins configured for output
+
+GPIO_REGISTER_GET
+    Read an arbitrary GPIO register
+
+GPIO_REGISTER_SET
+    Dynamically change GPIO configuration
+
+SET_LQTHRESHOLD
+    Set link quality thresholds; the sampling happens at every unicast
+    data frame Tx, if certain thresholds are met, and corresponding
+    events are sent to the host
+
+
+=====================================================================
+
+Name
+    GPIO_INPUT_GET
+
+Synopsis
+    Allows the host to read GPIO pins that are configured for input. The values read are
+    returned through a “GPIO_DATA” extension event.
+
+NOTE: Support for GPIO is optional.
+
+Command
+    N/A
+
+Command Parameters
+    None
+
+
+
+Reply Parameters
+    None
+
+
+Reset Value
+    None
+
+
+
+Restrictions
+    None
+
+=====================================================================
+
+
+Name
+    GPIO_INTR_ACK
+
+Synopsis
+    The host uses this command to acknowledge and to re-arm GPIO interrupts reported
+    through an earlier “GPIO_INTR” extension event. A single “GPIO_INTR_ACK”
+    command should be used to acknowledge all GPIO interrupts that the host knows to
+    be outstanding (if pending interrupts are not acknowledged through
+    “GPIO_INTR_ACK”, another “GPIO_INTR” extension event is raised).
+
+NOTE: Support for GPIO is optional.
+
+Command
+    N/A
+
+Command Parameters
+    UINT32    ack_mask
+        A mask of interrupting GPIO pins (e.g., ack_mask
+        bit [3] acknowledges an interrupt from the pin GPIO3).
+
+Command Values
+    None
+
+Reset Value
+    None
+
+Restrictions
+    The host should acknowledge only interrupts about which it was notified.
+
+
+=====================================================================
+
+Name
+    GPIO_OUTPUT_SET
+
+Synopsis
+    Manages output on GPIO pins configured for output.
+
+    Conflicts between set_mask and clear_mask or enable_mask and disable_mask result
+    in undefined behavior.
+
+NOTE: Support for GPIO is optional.
+
+Command
+    N/A
+
+Command Parameters
+    UINT32    set_mask
+        Specifies which pins should drive a 1 out
+    UINT32    clear_mask
+        Specifies which pins should drive a 0 out
+    UINT32    enable_mask
+        Specifies which pins should be enabled for output
+    UINT32    disable_mask
+        Specifies which pins should be disabled for output
+
+Command Values
+    None
+
+
+Reset Value
+    None
+
+
+Restrictions
+    None
+
+
+
+=====================================================================
+
+
+Name
+    GPIO_REGISTER_GET
+
+Synopsis
+    Allows the host to read an arbitrary GPIO register. It is intended for use during
+    bringup/debug. The target responds to this command with a “GPIO_DATA” event.
+
+NOTE: Support for GPIO is optional.
+
+Command
+    N/A
+
+Command Parameters
+    UINT32
+    gpioreg_id
+    Specifies a GPIO register identifier, as defined
+in include/AR6000/AR6000_gpio.h
+
+Reply Parameters
+    None
+
+Reset Value
+    N/A
+
+Restrictions
+    None
+
+
+=====================================================================
+
+Name
+    GPIO_REGISTER_SET
+
+Synopsis
+    Allows the host to dynamically change GPIO configuration (usually handled
+    statically through the GPIO configuration DataSet).
+
+NOTE: Support for GPIO is optional.
+
+Command
+    N/A
+
+Command Parameters
+    UINT32    gpioreg_id
+        Specifies a GPIO register identifier, as defined in
+        include/AR6000/AR6000_gpio.h
+    UINT32    value
+        Specifies a value to write to the specified
+        GPIO register
+
+Command Values
+    None
+
+
+Reset Value
+    Initial hardware configuration is as defined in the AR6001 or AR6002 ROCmTM
+    Single-Chip MAC/BB/Radio for 2.4/5 GHz Embedded WLAN Applications data sheet. This
+    configuration is modified by the GPIO Configuration DataSet, if one exists.
+
+Restrictions
+    None
+
+
+=====================================================================
+
+
+Name
+    SET_LQTHRESHOLD
+
+Synopsis
+    Set link quality thresholds, the sampling happens at every unicast data frame Tx, if
+    certain threshold is met, corresponding event will be sent to host.
+
+Command
+    wmiconfig eth1 --lqThreshold <enable> <upper_threshold_1>...
+    <upper_threshold_4> <lower_threshold_1>... <lower_threshold_4>
+
+Command Parameters
+    A_UINT8   enable;
+    A_UINT8   thresholdAbove1_Val;
+    A_UINT8   thresholdAbove2_Val;
+    A_UINT8   thresholdAbove3_Val;
+    A_UINT8   thresholdAbove4_Val;
+    A_UINT8   thresholdBelow1_Val;
+    A_UINT8   thresholdBelow2_Val;
+    A_UINT8   thresholdBelow3_Val;
+    A_UINT8   thresholdBelow4_Val;
+
+Command Values
+    enable
+    = 0
+    Disable link quality sampling
+
+        = 1
+    Enable link quality sampling
+
+
+    thresholdAbove_Val
+    [1...4]
+    Above thresholds (value in [0,100]), in ascending
+    order threshold
+
+    Below_Val [1...4] = below thresholds (value
+    in [0,100]), in ascending order
+
+Reset Values
+    None
+
+Restrictions
+    None
+
+=====================================================================
+WMI Extension Events
+
+The WMI EXTENSION event is used for a collection of events that:
+
+    Are not generic wireless events
+    May be implementation-specific
+    May be target platform-specific
+    May be optional for a host implementation
+
+    An extension event is sent from the AR6000 device targets to the host just like
+any other WMI event message, using the WMI_EXTENSION_EVENTID. The
+first field of the payload for this “EXTENSION” event is another commandId
+(sometimes called the subcommandId) that indicates which “EXTENSION”
+event is being used. A subcommandId-specific payload follows the
+subcommandId.
+
+All extensions (subcommandIds) are listed in the header file include/wmix.h.
+See also “WMI Extension Commands” on page B-55.
+
+
+WMI Extension Events
+
+
+GPIO_ACK
+    Acknowledges a host set command has been processed by the device
+
+GPIO_DATA
+    Response to a host’s request for data
+
+GPIO_INTR
+    Signals that GPIO interrupts are pending
+
+
+=====================================================================
+
+Name
+    GPIO_ACK
+
+Synopsis
+    Acknowledges that a host set command (either “GPIO_OUTPUT_SET” or
+    “GPIO_REGISTER_SET”) has been processed by the AR6000 device.
+
+NOTE: Support for GPIO is optional.
+
+Event ID
+    N/A
+
+Event Parameters
+    None
+
+
+Event Values
+    None
+
+=====================================================================
+
+
+Name
+    GPIO_DATA
+
+Synopsis
+    The AR6000 device uses this event to respond to the host’s earlier request for data
+    (through either a “GPIO_REGISTER_GET” or a “GPIO_INPUT_GET” command).
+
+NOTE: Support for GPIO is optional.
+
+Event ID
+    N/A
+
+Event Parameters
+    UINT32    value
+        Holds the data of interest, which is either a register value
+        (in the case of “GPIO_REGISTER_GET”) or a mask of
+        pin inputs (in the case of “GPIO_INPUT_GET”).
+    UINT32    reg_id
+        Indicates which register was read (in the case of
+        “GPIO_REGISTER_GET”) or is GPIO_ID_NONE (in the
+        case of “GPIO_INPUT_GET”)
+
+Event Values
+    None
+
+
+=====================================================================
+
+
+
+Name
+    GPIO_INTR
+
+Synopsis
+    The AR6000 device raises this event to signal that GPIO interrupts are pending.
+    These GPIOs may be interrupts that occurred after the last “GPIO_INTR_ACK”
+    command was issued, or may be GPIO interrupts that the host failed to acknowledge
+    in the last “GPIO_INTR_ACK”. The AR6000 will not raise another GPIO_INTR
+    event until this event is acknowledged through a “GPIO_INTR_ACK” command.
+
+NOTE: Support for GPIO is optional.
+
+Event ID
+    N/A
+
+Event Parameters
+    UINT32    intr_mask
+        Indicates which GPIO interrupts are currently pending
+
+    UINT32    input_values
+        A recent copy of the GPIO input values, taken at the
+        time the most recent GPIO interrupt was processed
+
+Event Values
+    None
+
+
+
+=====================================================================
+#endif
diff --git a/drivers/ar6000/wmi/wmi_host.h b/drivers/ar6000/wmi/wmi_host.h
new file mode 100644
index 00000000000..57844bcf3df
--- /dev/null
+++ b/drivers/ar6000/wmi/wmi_host.h
@@ -0,0 +1,71 @@
+#ifndef _WMI_HOST_H_
+#define _WMI_HOST_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains local definitios for the wmi host module.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wmi/wmi_host.h#1 $
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct wmi_stats {
+    A_UINT32    cmd_len_err;
+    A_UINT32    cmd_id_err;
+};
+
+struct wmi_t {
+    A_BOOL                          wmi_ready;
+    A_BOOL                          wmi_numQoSStream;
+    A_UINT8                         wmi_wmiStream2AcMapping[WMI_PRI_MAX_COUNT];
+    WMI_PRI_STREAM_ID               wmi_ac2WmiStreamMapping[WMM_NUM_AC];
+    A_UINT16                        wmi_streamExistsForAC[WMM_NUM_AC];
+    A_UINT8                         wmi_fatPipeExists;
+    void                           *wmi_devt;
+    struct wmi_stats                wmi_stats;
+    struct ieee80211_node_table     wmi_scan_table;
+    A_UINT8                         wmi_bssid[ATH_MAC_LEN];
+    A_UINT8                         wmi_powerMode;
+    A_UINT8                         wmi_phyMode;
+    A_UINT8                         wmi_keepaliveInterval;
+    A_MUTEX_T                       wmi_lock;
+};
+
+#define WMI_INIT_WMISTREAM_AC_MAP(w) \
+{  (w)->wmi_wmiStream2AcMapping[WMI_BEST_EFFORT_PRI] = WMM_AC_BE; \
+   (w)->wmi_wmiStream2AcMapping[WMI_LOW_PRI] = WMM_AC_BK; \
+   (w)->wmi_wmiStream2AcMapping[WMI_HIGH_PRI] = WMM_AC_VI; \
+   (w)->wmi_wmiStream2AcMapping[WMI_HIGHEST_PRI] = WMM_AC_VO; \
+   (w)->wmi_ac2WmiStreamMapping[WMM_AC_BE] = WMI_BEST_EFFORT_PRI; \
+   (w)->wmi_ac2WmiStreamMapping[WMM_AC_BK] = WMI_LOW_PRI; \
+   (w)->wmi_ac2WmiStreamMapping[WMM_AC_VI] = WMI_HIGH_PRI; \
+   (w)->wmi_ac2WmiStreamMapping[WMM_AC_VO] = WMI_HIGHEST_PRI; }
+
+#define WMI_WMISTREAM_ACCESSCATEGORY(w,s)      (w)->wmi_wmiStream2AcMapping[s]
+#define WMI_ACCESSCATEGORY_WMISTREAM(w,ac)       (w)->wmi_ac2WmiStreamMapping[ac]
+
+#define LOCK_WMI(w)     A_MUTEX_LOCK(&(w)->wmi_lock);
+#define UNLOCK_WMI(w)   A_MUTEX_UNLOCK(&(w)->wmi_lock);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMI_HOST_H_ */
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 15a23031833..fe3eba5d6b3 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -219,6 +219,8 @@ enum {
 	AHCI_HFLAG_SECT255		= (1 << 8), /* max 255 sectors */
 	AHCI_HFLAG_YES_NCQ		= (1 << 9), /* force NCQ cap on */
 	AHCI_HFLAG_NO_SUSPEND		= (1 << 10), /* don't suspend */
+	AHCI_HFLAG_SRST_TOUT_IS_OFFLINE	= (1 << 11), /* treat SRST timeout as
+							link offline */
 
 	/* ap->flags bits */
 
@@ -513,11 +515,16 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
 	{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
 	{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
+	{ PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
 	{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+	{ PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
+	{ PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
 	{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
 	{ PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
 	{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
 	{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -1658,6 +1665,7 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
 			     int (*check_ready)(struct ata_link *link))
 {
 	struct ata_port *ap = link->ap;
+	struct ahci_host_priv *hpriv = ap->host->private_data;
 	const char *reason = NULL;
 	unsigned long now, msecs;
 	struct ata_taskfile tf;
@@ -1696,12 +1704,21 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
 
 	/* wait for link to become ready */
 	rc = ata_wait_after_reset(link, deadline, check_ready);
-	/* link occupied, -ENODEV too is an error */
-	if (rc) {
+	if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
+		/*
+		 * Workaround for cases where link online status can't
+		 * be trusted.  Treat device readiness timeout as link
+		 * offline.
+		 */
+		ata_link_printk(link, KERN_INFO,
+				"device not ready, treating as offline\n");
+		*class = ATA_DEV_NONE;
+	} else if (rc) {
+		/* link occupied, -ENODEV too is an error */
 		reason = "device not ready";
 		goto fail;
-	}
-	*class = ahci_dev_classify(ap);
+	} else
+		*class = ahci_dev_classify(ap);
 
 	DPRINTK("EXIT, class=%u\n", *class);
 	return 0;
@@ -1768,7 +1785,8 @@ static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
 		irq_sts = readl(port_mmio + PORT_IRQ_STAT);
 		if (irq_sts & PORT_IRQ_BAD_PMP) {
 			ata_link_printk(link, KERN_WARNING,
-					"failed due to HW bug, retry pmp=0\n");
+					"applying SB600 PMP SRST workaround "
+					"and retrying\n");
 			rc = ahci_do_softreset(link, class, 0, deadline,
 					       ahci_check_ready);
 		}
@@ -2721,6 +2739,56 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
 	return !ver || strcmp(ver, dmi->driver_data) < 0;
 }
 
+static bool ahci_broken_online(struct pci_dev *pdev)
+{
+#define ENCODE_BUSDEVFN(bus, slot, func)			\
+	(void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
+	static const struct dmi_system_id sysids[] = {
+		/*
+		 * There are several gigabyte boards which use
+		 * SIMG5723s configured as hardware RAID.  Certain
+		 * 5723 firmware revisions shipped there keep the link
+		 * online but fail to answer properly to SRST or
+		 * IDENTIFY when no device is attached downstream
+		 * causing libata to retry quite a few times leading
+		 * to excessive detection delay.
+		 *
+		 * As these firmwares respond to the second reset try
+		 * with invalid device signature, considering unknown
+		 * sig as offline works around the problem acceptably.
+		 */
+		{
+			.ident = "EP45-DQ6",
+			.matches = {
+				DMI_MATCH(DMI_BOARD_VENDOR,
+					  "Gigabyte Technology Co., Ltd."),
+				DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
+			},
+			.driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
+		},
+		{
+			.ident = "EP45-DS5",
+			.matches = {
+				DMI_MATCH(DMI_BOARD_VENDOR,
+					  "Gigabyte Technology Co., Ltd."),
+				DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
+			},
+			.driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
+		},
+		{ }	/* terminate list */
+	};
+#undef ENCODE_BUSDEVFN
+	const struct dmi_system_id *dmi = dmi_first_match(sysids);
+	unsigned int val;
+
+	if (!dmi)
+		return false;
+
+	val = (unsigned long)dmi->driver_data;
+
+	return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
+}
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
@@ -2836,6 +2904,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 			   "BIOS update required for suspend/resume\n");
 	}
 
+	if (ahci_broken_online(pdev)) {
+		hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
+		dev_info(&pdev->dev,
+			 "online status unreliable, applying workaround\n");
+	}
+
 	/* CAP.NP sometimes indicate the index of the last enabled
 	 * port, at other times, that of the last possible port, so
 	 * determining the maximum port number requires looking at
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index d0a14cf2bd7..9ac4e378992 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -596,9 +596,12 @@ static const struct ich_laptop ich_laptop[] = {
 	{ 0x27DF, 0x0005, 0x0280 },	/* ICH7 on Acer 5602WLMi */
 	{ 0x27DF, 0x1025, 0x0102 },	/* ICH7 on Acer 5602aWLMi */
 	{ 0x27DF, 0x1025, 0x0110 },	/* ICH7 on Acer 3682WLMi */
+	{ 0x27DF, 0x1028, 0x02b0 },	/* ICH7 on unknown Dell */
 	{ 0x27DF, 0x1043, 0x1267 },	/* ICH7 on Asus W5F */
 	{ 0x27DF, 0x103C, 0x30A1 },	/* ICH7 on HP Compaq nc2400 */
+	{ 0x27DF, 0x103C, 0x361a },	/* ICH7 on unkown HP  */
 	{ 0x27DF, 0x1071, 0xD221 },	/* ICH7 on Hercules EC-900 */
+	{ 0x27DF, 0x152D, 0x0778 },	/* ICH7 on unknown Intel */
 	{ 0x24CA, 0x1025, 0x0061 },	/* ICH4 on ACER Aspire 2023WLMi */
 	{ 0x24CA, 0x1025, 0x003d },	/* ICH4 on ACER TM290 */
 	{ 0x266F, 0x1025, 0x0066 },	/* ICH6 on ACER Aspire 1694WLMi */
@@ -661,6 +664,8 @@ static int piix_pata_prereset(struct ata_link *link, unsigned long deadline)
 	return ata_sff_prereset(link, deadline);
 }
 
+static DEFINE_SPINLOCK(piix_lock);
+
 /**
  *	piix_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
@@ -674,8 +679,9 @@ static int piix_pata_prereset(struct ata_link *link, unsigned long deadline)
 
 static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
-	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
 	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
+	unsigned long flags;
+	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
 	unsigned int is_slave	= (adev->devno != 0);
 	unsigned int master_port= ap->port_no ? 0x42 : 0x40;
 	unsigned int slave_port	= 0x44;
@@ -705,6 +711,8 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	if (adev->class == ATA_DEV_ATA)
 		control |= 4;	/* PPE enable */
 
+	spin_lock_irqsave(&piix_lock, flags);
+
 	/* PIO configuration clears DTE unconditionally.  It will be
 	 * programmed in set_dmamode which is guaranteed to be called
 	 * after set_piomode if any DMA mode is available.
@@ -744,6 +752,8 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
 		pci_write_config_byte(dev, 0x48, udma_enable);
 	}
+
+	spin_unlock_irqrestore(&piix_lock, flags);
 }
 
 /**
@@ -761,6 +771,7 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, int isich)
 {
 	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
+	unsigned long flags;
 	u8 master_port		= ap->port_no ? 0x42 : 0x40;
 	u16 master_data;
 	u8 speed		= adev->dma_mode;
@@ -774,6 +785,8 @@ static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, in
 			    { 2, 1 },
 			    { 2, 3 }, };
 
+	spin_lock_irqsave(&piix_lock, flags);
+
 	pci_read_config_word(dev, master_port, &master_data);
 	if (ap->udma_mask)
 		pci_read_config_byte(dev, 0x48, &udma_enable);
@@ -864,6 +877,8 @@ static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, in
 	/* Don't scribble on 0x48 if the controller does not support UDMA */
 	if (ap->udma_mask)
 		pci_write_config_byte(dev, 0x48, udma_enable);
+
+	spin_unlock_irqrestore(&piix_lock, flags);
 }
 
 /**
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 045a486a09e..072ba5ea138 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1515,6 +1515,7 @@ static int ata_hpa_resize(struct ata_device *dev)
 
 		return rc;
 	}
+	dev->n_native_sectors = native_sectors;
 
 	/* nothing to do? */
 	if (native_sectors <= sectors || !ata_ignore_hpa) {
@@ -3392,17 +3393,27 @@ int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel)
 
 static int ata_dev_set_mode(struct ata_device *dev)
 {
+	struct ata_port *ap = dev->link->ap;
 	struct ata_eh_context *ehc = &dev->link->eh_context;
+	const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER;
 	const char *dev_err_whine = "";
 	int ign_dev_err = 0;
-	unsigned int err_mask;
+	unsigned int err_mask = 0;
 	int rc;
 
 	dev->flags &= ~ATA_DFLAG_PIO;
 	if (dev->xfer_shift == ATA_SHIFT_PIO)
 		dev->flags |= ATA_DFLAG_PIO;
 
-	err_mask = ata_dev_set_xfermode(dev);
+	if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id))
+		dev_err_whine = " (SET_XFERMODE skipped)";
+	else {
+		if (nosetxfer)
+			ata_dev_printk(dev, KERN_WARNING,
+				       "NOSETXFER but PATA detected - can't "
+				       "skip SETXFER, might malfunction\n");
+		err_mask = ata_dev_set_xfermode(dev);
+	}
 
 	if (err_mask & ~AC_ERR_DEV)
 		goto fail;
@@ -4089,6 +4100,7 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 		       unsigned int readid_flags)
 {
 	u64 n_sectors = dev->n_sectors;
+	u64 n_native_sectors = dev->n_native_sectors;
 	int rc;
 
 	if (!ata_dev_enabled(dev))
@@ -4118,16 +4130,30 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 	/* verify n_sectors hasn't changed */
 	if (dev->class == ATA_DEV_ATA && n_sectors &&
 	    dev->n_sectors != n_sectors) {
-		ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch "
+		ata_dev_printk(dev, KERN_WARNING, "n_sectors mismatch "
 			       "%llu != %llu\n",
 			       (unsigned long long)n_sectors,
 			       (unsigned long long)dev->n_sectors);
-
-		/* restore original n_sectors */
-		dev->n_sectors = n_sectors;
-
-		rc = -ENODEV;
-		goto fail;
+		/*
+		 * Something could have caused HPA to be unlocked
+		 * involuntarily.  If n_native_sectors hasn't changed
+		 * and the new size matches it, keep the device.
+		 */
+		if (dev->n_native_sectors == n_native_sectors &&
+		    dev->n_sectors > n_sectors &&
+		    dev->n_sectors == n_native_sectors) {
+			ata_dev_printk(dev, KERN_WARNING,
+				       "new n_sectors matches native, probably "
+				       "late HPA unlock, continuing\n");
+			/* keep using the old n_sectors */
+			dev->n_sectors = n_sectors;
+		} else {
+			/* restore original n_[native]_sectors and fail */
+			dev->n_native_sectors = n_native_sectors;
+			dev->n_sectors = n_sectors;
+			rc = -ENODEV;
+			goto fail;
+		}
 	}
 
 	return 0;
@@ -4276,6 +4302,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
 	{ "MAXTOR 6L080L4",	"A93.0500",	ATA_HORKAGE_BROKEN_HPA },
 
+	/* this one allows HPA unlocking but fails IOs on the area */
+	{ "OCZ-VERTEX",		    "1.30",	ATA_HORKAGE_BROKEN_HPA },
+
 	/* Devices which report 1 sector over size HPA */
 	{ "ST340823A",		NULL,		ATA_HORKAGE_HPA_SIZE, },
 	{ "ST320413A",		NULL,		ATA_HORKAGE_HPA_SIZE, },
@@ -4297,6 +4326,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	/* Devices which aren't very happy with higher link speeds */
 	{ "WD My Book",			NULL,	ATA_HORKAGE_1_5_GBPS, },
 
+	/*
+	 * Devices which choke on SETXFER.  Applies only if both the
+	 * device and controller are SATA.
+	 */
+	{ "PIONEER DVD-RW  DVRTD08",	"1.00",	ATA_HORKAGE_NOSETXFER },
+
 	/* End Marker */
 	{ }
 };
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index fa22f94ca41..79711b64054 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2327,7 +2327,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	struct ata_port *ap = link->ap;
 	struct ata_link *slave = ap->slave_link;
 	struct ata_eh_context *ehc = &link->eh_context;
-	struct ata_eh_context *sehc = &slave->eh_context;
+	struct ata_eh_context *sehc = slave ? &slave->eh_context : NULL;
 	unsigned int *classes = ehc->classes;
 	unsigned int lflags = link->flags;
 	int verbose = !(ehc->i.flags & ATA_EHI_QUIET);
@@ -2517,6 +2517,10 @@ int ata_eh_reset(struct ata_link *link, int classify,
 
 			ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
 			rc = ata_do_reset(link, reset, classes, deadline, true);
+			if (rc) {
+				failed_link = link;
+				goto fail;
+			}
 		}
 	} else {
 		if (verbose)
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 4b27617be26..41c94b1ae49 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -26,9 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 
-#include <mach/at91sam9260_matrix.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at91sam9260.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -44,65 +42,62 @@ struct at91_ide_info {
 	unsigned long mode;
 	unsigned int cs;
 
+	struct clk *mck;
+
 	void __iomem *ide_addr;
 	void __iomem *alt_addr;
 };
 
-const struct ata_timing initial_timing =
+static const struct ata_timing initial_timing =
 	{XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
 
-static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
 {
 	unsigned long mul;
 
-    /*
-     * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
-     *     x * (f / 1_000_000_000) =
-     *     x * ((f * 65536) / 1_000_000_000) / 65536 =
-     *     x * (((f / 10_000) * 65536) / 100_000) / 65536 =
-     */
+	/*
+	* cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
+	*     x * (f / 1_000_000_000) =
+	*     x * ((f * 65536) / 1_000_000_000) / 65536 =
+	*     x * (((f / 10_000) * 65536) / 100_000) / 65536 =
+	*/
 
-    mul = (mck_hz / 10000) << 16;
-    mul /= 100000;
+	mul = (mck_hz / 10000) << 16;
+	mul /= 100000;
 
-    return (ns * mul + 65536) >> 16;    /* rounding */
+	return (ns * mul + 65536) >> 16;    /* rounding */
 }
 
 static void set_smc_mode(struct at91_ide_info *info)
 {
-    at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
-    return;
+	at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+	return;
 }
 
 static void set_smc_timing(struct device *dev,
 		struct at91_ide_info *info, const struct ata_timing *ata)
 {
-	int read_cycle, write_cycle, active, recover;
-	int nrd_setup, nrd_pulse, nrd_recover;
-	int nwe_setup, nwe_pulse;
+	unsigned long read_cycle, write_cycle, active, recover;
+	unsigned long nrd_setup, nrd_pulse, nrd_recover;
+	unsigned long nwe_setup, nwe_pulse;
 
-	int ncs_write_setup, ncs_write_pulse;
-	int ncs_read_setup, ncs_read_pulse;
+	unsigned long ncs_write_setup, ncs_write_pulse;
+	unsigned long ncs_read_setup, ncs_read_pulse;
 
-	unsigned int mck_hz;
-	struct clk *mck;
+	unsigned long mck_hz;
 
 	read_cycle  = ata->cyc8b;
 	nrd_setup   = ata->setup;
 	nrd_pulse   = ata->act8b;
 	nrd_recover = ata->rec8b;
 
-	mck = clk_get(NULL, "mck");
-	BUG_ON(IS_ERR(mck));
-	mck_hz = clk_get_rate(mck);
+	mck_hz = clk_get_rate(info->mck);
 
 	read_cycle  = calc_mck_cycles(read_cycle, mck_hz);
 	nrd_setup   = calc_mck_cycles(nrd_setup, mck_hz);
 	nrd_pulse   = calc_mck_cycles(nrd_pulse, mck_hz);
 	nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
 
-	clk_put(mck);
-
 	active  = nrd_setup + nrd_pulse;
 	recover = read_cycle - active;
 
@@ -121,13 +116,13 @@ static void set_smc_timing(struct device *dev,
 	ncs_write_setup = ncs_read_setup;
 	ncs_write_pulse = ncs_read_pulse;
 
-	dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n",
+	dev_dbg(dev, "ATA timings: nrd_setup = %lu nrd_pulse = %lu nrd_cycle = %lu\n",
 			nrd_setup, nrd_pulse, read_cycle);
-	dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n",
+	dev_dbg(dev, "ATA timings: nwe_setup = %lu nwe_pulse = %lu nwe_cycle = %lu\n",
 			nwe_setup, nwe_pulse, write_cycle);
-	dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n",
+	dev_dbg(dev, "ATA timings: ncs_read_setup = %lu ncs_read_pulse = %lu\n",
 			ncs_read_setup, ncs_read_pulse);
-	dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n",
+	dev_dbg(dev, "ATA timings: ncs_write_setup = %lu ncs_write_pulse = %lu\n",
 			ncs_write_setup, ncs_write_pulse);
 
 	at91_sys_write(AT91_SMC_SETUP(info->cs),
@@ -217,6 +212,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
 	struct resource *mem_res;
 	struct ata_host *host;
 	struct ata_port *ap;
+
 	int irq_flags = 0;
 	int irq = 0;
 	int ret;
@@ -254,13 +250,20 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
 		ata_port_desc(ap, "no IRQ, using PIO polling");
 	}
 
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
 
 	if (!info) {
 		dev_err(dev, "failed to allocate memory for private data\n");
 		return -ENOMEM;
 	}
 
+	info->mck = clk_get(NULL, "mck");
+
+	if (IS_ERR(info->mck)) {
+		dev_err(dev, "failed to get access to mck clock\n");
+		return -ENODEV;
+	}
+
 	info->cs    = board->chipselect;
 	info->mode  = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
@@ -272,7 +275,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
 	if (!info->ide_addr) {
 		dev_err(dev, "failed to map IO base\n");
 		ret = -ENOMEM;
-		goto err_ide_ioremap;
+		goto err_put;
 	}
 
 	info->alt_addr = devm_ioremap(dev,
@@ -281,7 +284,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
 	if (!info->alt_addr) {
 		dev_err(dev, "failed to map CTL base\n");
 		ret = -ENOMEM;
-		goto err_alt_ioremap;
+		goto err_put;
 	}
 
 	ap->ioaddr.cmd_addr = info->ide_addr;
@@ -300,33 +303,27 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
 			irq ? ata_sff_interrupt : NULL,
 			irq_flags, &pata_at91_sht);
 
-err_alt_ioremap:
-	devm_iounmap(dev, info->ide_addr);
-
-err_ide_ioremap:
-	kfree(info);
-
+err_put:
+	clk_put(info->mck);
 	return ret;
 }
 
 static int __devexit pata_at91_remove(struct platform_device *pdev)
 {
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
-	struct at91_ide_info *info = host->private_data;
-	struct device *dev = &pdev->dev;
+	struct at91_ide_info *info;
 
 	if (!host)
 		return 0;
+	info = host->private_data;
 
 	ata_host_detach(host);
 
 	if (!info)
 		return 0;
 
-	devm_iounmap(dev, info->ide_addr);
-	devm_iounmap(dev, info->alt_addr);
+	clk_put(info->mck);
 
-	kfree(info);
 	return 0;
 }
 
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index bec0b8ade66..45915566e4e 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -1,6 +1,7 @@
 /*
  * pata_atiixp.c 	- ATI PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
+ *			  (C) 2009 Bartlomiej Zolnierkiewicz
  *
  * Based on
  *
@@ -61,20 +62,19 @@ static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev,
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	int dn = 2 * ap->port_no + adev->devno;
-
-	/* Check this is correct - the order is odd in both drivers */
 	int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
-	u16 pio_mode_data, pio_timing_data;
+	u32 pio_timing_data;
+	u16 pio_mode_data;
 
 	pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
 	pio_mode_data &= ~(0x7 << (4 * dn));
 	pio_mode_data |= pio << (4 * dn);
 	pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
 
-	pci_read_config_word(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
+	pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
 	pio_timing_data &= ~(0xFF << timing_shift);
 	pio_timing_data |= (pio_timings[pio] << timing_shift);
-	pci_write_config_word(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
+	pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
 }
 
 /**
@@ -119,16 +119,17 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 		udma_mode_data |= dma << (4 * dn);
 		pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
 	} else {
-		u16 mwdma_timing_data;
-		/* Check this is correct - the order is odd in both drivers */
 		int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
+		u32 mwdma_timing_data;
 
 		dma -= XFER_MW_DMA_0;
 
-		pci_read_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, &mwdma_timing_data);
+		pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+				      &mwdma_timing_data);
 		mwdma_timing_data &= ~(0xFF << timing_shift);
 		mwdma_timing_data |= (mwdma_timings[dma] << timing_shift);
-		pci_write_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, mwdma_timing_data);
+		pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+				       mwdma_timing_data);
 	}
 	/*
 	 *	We must now look at the PIO mode situation. We may need to
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 8d9343accf3..abdd19fe990 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -653,7 +653,8 @@ static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
 
 		ap = host->ports[i];
 		ocd = ap->dev->platform_data;
-		if (!ap || (ap->flags & ATA_FLAG_DISABLED))
+
+		if (ap->flags & ATA_FLAG_DISABLED)
 			continue;
 
 		ocd = ap->dev->platform_data;
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index f4d009ed50a..dc99e26f8e5 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -411,6 +411,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
 	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
+	PCMCIA_DEVICE_PROD_ID12("CNF   ", "CD-ROM", 0x46d7db81, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
 	PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 23714aefb82..c19417e0220 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2514,7 +2514,7 @@ static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled)
 	char *when = "idle";
 
 	ata_ehi_clear_desc(ehi);
-	if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
+	if (ap->flags & ATA_FLAG_DISABLED) {
 		when = "disabled";
 	} else if (edma_was_enabled) {
 		when = "EDMA enabled";
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index b2d11f300c3..86a40582999 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -602,6 +602,7 @@ MODULE_VERSION(DRV_VERSION);
 
 static int adma_enabled;
 static int swncq_enabled = 1;
+static int msi_enabled;
 
 static void nv_adma_register_mode(struct ata_port *ap)
 {
@@ -2459,6 +2460,11 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	} else if (type == SWNCQ)
 		nv_swncq_host_init(host);
 
+	if (msi_enabled) {
+		dev_printk(KERN_NOTICE, &pdev->dev, "Using MSI\n");
+		pci_enable_msi(pdev);
+	}
+
 	pci_set_master(pdev);
 	return ata_host_activate(host, pdev->irq, ipriv->irq_handler,
 				 IRQF_SHARED, ipriv->sht);
@@ -2558,4 +2564,6 @@ module_param_named(adma, adma_enabled, bool, 0444);
 MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
 module_param_named(swncq, swncq_enabled, bool, 0444);
 MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
+module_param_named(msi, msi_enabled, bool, 0444);
+MODULE_PARM_DESC(msi, "Enable use of MSI (Default: false)");
 
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 030ec079b18..35bd5cc7f28 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -532,7 +532,7 @@ static irqreturn_t sil_interrupt(int irq, void *dev_instance)
 		struct ata_port *ap = host->ports[i];
 		u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2);
 
-		if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
+		if (unlikely(ap->flags & ATA_FLAG_DISABLED))
 			continue;
 
 		/* turn off SATA_IRQ if not supported */
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index e8beb8e5b62..05dd307e8f0 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -428,6 +428,9 @@ int devres_release_all(struct device *dev)
 {
 	unsigned long flags;
 
+	/* Looks like an uninitialized device structure */
+	if (WARN_ON(dev->devres_head.next == NULL))
+		return -ENODEV;
 	spin_lock_irqsave(&dev->devres_lock, flags);
 	return release_nodes(dev, dev->devres_head.next, &dev->devres_head,
 			     flags);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index ddeb819c8f8..7376367bcb8 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -180,7 +180,6 @@ static ssize_t firmware_loading_store(struct device *dev,
 				goto err;
 			}
 			/* Pages will be freed by vfree() */
-			fw_priv->pages = NULL;
 			fw_priv->page_array_size = 0;
 			fw_priv->nr_pages = 0;
 			complete(&fw_priv->completion);
@@ -217,8 +216,10 @@ firmware_data_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 		ret_count = -ENODEV;
 		goto out;
 	}
-	if (offset > fw->size)
-		return 0;
+	if (offset > fw->size) {
+		ret_count = 0;
+		goto out;
+	}
 	if (count > fw->size - offset)
 		count = fw->size - offset;
 
@@ -357,7 +358,7 @@ static void fw_dev_release(struct device *dev)
 	kfree(fw_priv->pages);
 	kfree(fw_priv->fw_id);
 	kfree(fw_priv);
-	put_device(dev);
+	kfree(dev);
 
 	module_put(THIS_MODULE);
 }
@@ -408,13 +409,11 @@ static int fw_register_device(struct device **dev_p, const char *fw_name,
 	if (retval) {
 		dev_err(device, "%s: device_register failed\n", __func__);
 		put_device(f_dev);
-		goto error_kfree_fw_id;
+		return retval;
 	}
 	*dev_p = f_dev;
 	return 0;
 
-error_kfree_fw_id:
-	kfree(fw_priv->fw_id);
 error_kfree:
 	kfree(f_dev);
 	kfree(fw_priv);
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 81cb01bfc35..456594bd97b 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -483,9 +483,6 @@ int platform_driver_register(struct platform_driver *drv)
 		drv->driver.remove = platform_drv_remove;
 	if (drv->shutdown)
 		drv->driver.shutdown = platform_drv_shutdown;
-	if (drv->suspend || drv->resume)
-		pr_warning("Platform driver '%s' needs updating - please use "
-			"dev_pm_ops\n", drv->driver.name);
 
 	return driver_register(&drv->driver);
 }
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index fae72545898..58a3e572f2c 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -762,6 +762,7 @@ static int dpm_prepare(pm_message_t state)
 			dev->power.status = DPM_ON;
 			if (error == -EAGAIN) {
 				put_device(dev);
+				error = 0;
 				continue;
 			}
 			printk(KERN_ERR "PM: Failed to prepare device %s "
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 79a9ae5238a..0d903909af7 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -275,9 +275,9 @@ int sysdev_register(struct sys_device *sysdev)
 				drv->add(sysdev);
 		}
 		mutex_unlock(&sysdev_drivers_lock);
+		kobject_uevent(&sysdev->kobj, KOBJ_ADD);
 	}
 
-	kobject_uevent(&sysdev->kobj, KOBJ_ADD);
 	return error;
 }
 
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 668dc234b8e..1e6b7c14f69 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -36,6 +36,7 @@
 #include <linux/ioport.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/proc_fs.h>
 #include <linux/reboot.h>
 #include <linux/spinlock.h>
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index bb72ada9f07..1d886e079c5 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -298,6 +298,22 @@ config BLK_DEV_NBD
 
 	  If unsure, say N.
 
+config BLK_DEV_OSD
+	tristate "OSD object-as-blkdev support"
+	depends on SCSI_OSD_ULD
+	---help---
+	  Saying Y or M here will allow the exporting of a single SCSI
+	  OSD (object-based storage) object as a Linux block device.
+
+	  For example, if you create a 2G object on an OSD device,
+	  you can then use this module to present that 2G object as
+	  a Linux block device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called osdblk.
+
+	  If unsure, say N.
+
 config BLK_DEV_SX8
 	tristate "Promise SATA SX8 support"
 	depends on PCI
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 7755a5e2a85..cdaa3f8fddf 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_XILINX_SYSACE)	+= xsysace.o
 obj-$(CONFIG_CDROM_PKTCDVD)	+= pktcdvd.o
 obj-$(CONFIG_MG_DISK)		+= mg_disk.o
 obj-$(CONFIG_SUNVDC)		+= sunvdc.o
+obj-$(CONFIG_BLK_DEV_OSD)	+= osdblk.o
 
 obj-$(CONFIG_BLK_DEV_UMEM)	+= umem.o
 obj-$(CONFIG_BLK_DEV_NBD)	+= nbd.o
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 9c6e5b0fe89..2f07b7c99a9 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1645,7 +1645,7 @@ static int __init fd_probe_drives(void)
 {
 	int drive,drives,nomem;
 
-	printk(KERN_INFO "FD: probing units\n" KERN_INFO "found ");
+	printk(KERN_INFO "FD: probing units\nfound ");
 	drives=0;
 	nomem=0;
 	for(drive=0;drive<FD_MAX_UNITS;drive++) {
diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h
index 5e41e6dd657..db195abad69 100644
--- a/drivers/block/aoe/aoe.h
+++ b/drivers/block/aoe/aoe.h
@@ -155,7 +155,7 @@ struct aoedev {
 	u16 fw_ver;		/* version of blade's firmware */
 	struct work_struct work;/* disk create work struct */
 	struct gendisk *gd;
-	struct request_queue blkq;
+	struct request_queue *blkq;
 	struct hd_geometry geo; 
 	sector_t ssize;
 	struct timer_list timer;
diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c
index 2307a271bdc..1e15889c4b9 100644
--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -264,9 +264,12 @@ aoeblk_gdalloc(void *vp)
 		goto err_disk;
 	}
 
-	blk_queue_make_request(&d->blkq, aoeblk_make_request);
-	if (bdi_init(&d->blkq.backing_dev_info))
+	d->blkq = blk_alloc_queue(GFP_KERNEL);
+	if (!d->blkq)
 		goto err_mempool;
+	blk_queue_make_request(d->blkq, aoeblk_make_request);
+	if (bdi_init(&d->blkq->backing_dev_info))
+		goto err_blkq;
 	spin_lock_irqsave(&d->lock, flags);
 	gd->major = AOE_MAJOR;
 	gd->first_minor = d->sysminor * AOE_PARTITIONS;
@@ -276,7 +279,7 @@ aoeblk_gdalloc(void *vp)
 	snprintf(gd->disk_name, sizeof gd->disk_name, "etherd/e%ld.%d",
 		d->aoemajor, d->aoeminor);
 
-	gd->queue = &d->blkq;
+	gd->queue = d->blkq;
 	d->gd = gd;
 	d->flags &= ~DEVFL_GDALLOC;
 	d->flags |= DEVFL_UP;
@@ -287,6 +290,9 @@ aoeblk_gdalloc(void *vp)
 	aoedisk_add_sysfs(d);
 	return;
 
+err_blkq:
+	blk_cleanup_queue(d->blkq);
+	d->blkq = NULL;
 err_mempool:
 	mempool_destroy(d->bufpool);
 err_disk:
diff --git a/drivers/block/aoe/aoedev.c b/drivers/block/aoe/aoedev.c
index eeea477d960..fa67027789a 100644
--- a/drivers/block/aoe/aoedev.c
+++ b/drivers/block/aoe/aoedev.c
@@ -113,6 +113,7 @@ aoedev_freedev(struct aoedev *d)
 	if (d->bufpool)
 		mempool_destroy(d->bufpool);
 	skbpoolfree(d);
+	blk_cleanup_queue(d->blkq);
 	kfree(d);
 }
 
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index f5e7180d7f4..3ff02941b3d 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1627,7 +1627,7 @@ static int fd_ioctl(struct block_device *bdev, fmode_t mode,
 				drive, dtp->blocks, dtp->spt, dtp->stretch);
 
 		/* sanity check */
-		if (!dtp || setprm.track != dtp->blocks/dtp->spt/2 ||
+		if (setprm.track != dtp->blocks/dtp->spt/2 ||
 		    setprm.head != 2) {
 			redo_fd_request();
 			return -EINVAL;
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index c7a527c08a0..a52cc7fe45e 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -26,6 +26,7 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/delay.h>
 #include <linux/major.h>
 #include <linux/fs.h>
@@ -226,8 +227,18 @@ static inline void addQ(struct hlist_head *list, CommandList_struct *c)
 
 static inline void removeQ(CommandList_struct *c)
 {
-	if (WARN_ON(hlist_unhashed(&c->list)))
+	/*
+	 * After kexec/dump some commands might still
+	 * be in flight, which the firmware will try
+	 * to complete. Resetting the firmware doesn't work
+	 * with old fw revisions, so we have to mark
+	 * them off as 'stale' to prevent the driver from
+	 * falling over.
+	 */
+	if (WARN_ON(hlist_unhashed(&c->list))) {
+		c->cmd_type = CMD_MSG_STALE;
 		return;
+	}
 
 	hlist_del_init(&c->list);
 }
@@ -4246,7 +4257,8 @@ static void fail_all_cmds(unsigned long ctlr)
 	while (!hlist_empty(&h->cmpQ)) {
 		c = hlist_entry(h->cmpQ.first, CommandList_struct, list);
 		removeQ(c);
-		c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+		if (c->cmd_type != CMD_MSG_STALE)
+			c->err_info->CommandStatus = CMD_HARDWARE_ERR;
 		if (c->cmd_type == CMD_RWREQ) {
 			complete_command(h, c, 0);
 		} else if (c->cmd_type == CMD_IOCTL_PEND)
diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
index cd665b00c7c..dbaed1ea0da 100644
--- a/drivers/block/cciss_cmd.h
+++ b/drivers/block/cciss_cmd.h
@@ -274,6 +274,7 @@ typedef struct _ErrorInfo_struct {
 #define CMD_SCSI	0x03
 #define CMD_MSG_DONE	0x04
 #define CMD_MSG_TIMEOUT 0x05
+#define CMD_MSG_STALE	0xff
 
 /* This structure needs to be divisible by 8 for new
  * indexing method.
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 862b40c9018..91b75301378 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3327,7 +3327,10 @@ static inline int set_geometry(unsigned int cmd, struct floppy_struct *g,
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
 		mutex_lock(&open_lock);
-		LOCK_FDC(drive, 1);
+		if (lock_fdc(drive, 1)) {
+			mutex_unlock(&open_lock);
+			return -EINTR;
+		}
 		floppy_type[type] = *g;
 		floppy_type[type].name = "user format";
 		for (cnt = type << 2; cnt < (type << 2) + 4; cnt++)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 801f4ab8330..5757188cd1f 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -61,7 +61,6 @@
 #include <linux/blkdev.h>
 #include <linux/blkpg.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/swap.h>
 #include <linux/slab.h>
 #include <linux/loop.h>
diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index f703f547824..6d7fbaa9224 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -36,7 +36,6 @@
 
 /* Register offsets */
 #define MG_BUFF_OFFSET			0x8000
-#define MG_STORAGE_BUFFER_SIZE		0x200
 #define MG_REG_OFFSET			0xC000
 #define MG_REG_FEATURE			(MG_REG_OFFSET + 2)	/* write case */
 #define MG_REG_ERROR			(MG_REG_OFFSET + 2)	/* read case */
@@ -219,6 +218,16 @@ static unsigned int mg_wait(struct mg_host *host, u32 expect, u32 msec)
 	host->error = MG_ERR_NONE;
 	expire = jiffies + msecs_to_jiffies(msec);
 
+	/* These 2 times dummy status read prevents reading invalid
+	 * status. A very little time (3 times of mflash operating clk)
+	 * is required for busy bit is set. Use dummy read instead of
+	 * busy wait, because mflash's PLL is machine dependent.
+	 */
+	if (prv_data->use_polling) {
+		status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
+		status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
+	}
+
 	status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
 
 	do {
@@ -245,8 +254,6 @@ static unsigned int mg_wait(struct mg_host *host, u32 expect, u32 msec)
 			mg_dump_status("not ready", status, host);
 			return MG_ERR_INV_STAT;
 		}
-		if (prv_data->use_polling)
-			msleep(1);
 
 		status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
 	} while (time_before(cur_jiffies, expire));
@@ -469,9 +476,18 @@ static unsigned int mg_out(struct mg_host *host,
 	return MG_ERR_NONE;
 }
 
+static void mg_read_one(struct mg_host *host, struct request *req)
+{
+	u16 *buff = (u16 *)req->buffer;
+	u32 i;
+
+	for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
+		*buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET +
+			      (i << 1));
+}
+
 static void mg_read(struct request *req)
 {
-	u32 j;
 	struct mg_host *host = req->rq_disk->private_data;
 
 	if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req),
@@ -482,49 +498,65 @@ static void mg_read(struct request *req)
 	       blk_rq_sectors(req), blk_rq_pos(req), req->buffer);
 
 	do {
-		u16 *buff = (u16 *)req->buffer;
-
 		if (mg_wait(host, ATA_DRQ,
 			    MG_TMAX_WAIT_RD_DRQ) != MG_ERR_NONE) {
 			mg_bad_rw_intr(host);
 			return;
 		}
-		for (j = 0; j < MG_SECTOR_SIZE >> 1; j++)
-			*buff++ = inw((unsigned long)host->dev_base +
-				      MG_BUFF_OFFSET + (j << 1));
+
+		mg_read_one(host, req);
 
 		outb(MG_CMD_RD_CONF, (unsigned long)host->dev_base +
 				MG_REG_COMMAND);
 	} while (mg_end_request(host, 0, MG_SECTOR_SIZE));
 }
 
+static void mg_write_one(struct mg_host *host, struct request *req)
+{
+	u16 *buff = (u16 *)req->buffer;
+	u32 i;
+
+	for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
+		outw(*buff++, (unsigned long)host->dev_base + MG_BUFF_OFFSET +
+		     (i << 1));
+}
+
 static void mg_write(struct request *req)
 {
-	u32 j;
 	struct mg_host *host = req->rq_disk->private_data;
+	unsigned int rem = blk_rq_sectors(req);
 
-	if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req),
+	if (mg_out(host, blk_rq_pos(req), rem,
 		   MG_CMD_WR, NULL) != MG_ERR_NONE) {
 		mg_bad_rw_intr(host);
 		return;
 	}
 
 	MG_DBG("requested %d sects (from %ld), buffer=0x%p\n",
-	       blk_rq_sectors(req), blk_rq_pos(req), req->buffer);
+	       rem, blk_rq_pos(req), req->buffer);
+
+	if (mg_wait(host, ATA_DRQ,
+		    MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+		mg_bad_rw_intr(host);
+		return;
+	}
 
 	do {
-		u16 *buff = (u16 *)req->buffer;
+		mg_write_one(host, req);
 
-	if (mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+		outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
+				MG_REG_COMMAND);
+
+		rem--;
+		if (rem > 1 && mg_wait(host, ATA_DRQ,
+					MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+			mg_bad_rw_intr(host);
+			return;
+		} else if (mg_wait(host, MG_STAT_READY,
+					MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
 			mg_bad_rw_intr(host);
 			return;
 		}
-		for (j = 0; j < MG_SECTOR_SIZE >> 1; j++)
-			outw(*buff++, (unsigned long)host->dev_base +
-				      MG_BUFF_OFFSET + (j << 1));
-
-		outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
-				MG_REG_COMMAND);
 	} while (mg_end_request(host, 0, MG_SECTOR_SIZE));
 }
 
@@ -532,7 +564,6 @@ static void mg_read_intr(struct mg_host *host)
 {
 	struct request *req = host->req;
 	u32 i;
-	u16 *buff;
 
 	/* check status */
 	do {
@@ -550,13 +581,7 @@ static void mg_read_intr(struct mg_host *host)
 	return;
 
 ok_to_read:
-	/* get current segment of request */
-	buff = (u16 *)req->buffer;
-
-	/* read 1 sector */
-	for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
-		*buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET +
-			      (i << 1));
+	mg_read_one(host, req);
 
 	MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n",
 	       blk_rq_pos(req), blk_rq_sectors(req) - 1, req->buffer);
@@ -575,8 +600,7 @@ ok_to_read:
 static void mg_write_intr(struct mg_host *host)
 {
 	struct request *req = host->req;
-	u32 i, j;
-	u16 *buff;
+	u32 i;
 	bool rem;
 
 	/* check status */
@@ -597,12 +621,7 @@ static void mg_write_intr(struct mg_host *host)
 ok_to_write:
 	if ((rem = mg_end_request(host, 0, MG_SECTOR_SIZE))) {
 		/* write 1 sector and set handler if remains */
-		buff = (u16 *)req->buffer;
-		for (j = 0; j < MG_STORAGE_BUFFER_SIZE >> 1; j++) {
-			outw(*buff, (unsigned long)host->dev_base +
-					MG_BUFF_OFFSET + (j << 1));
-			buff++;
-		}
+		mg_write_one(host, req);
 		MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n",
 		       blk_rq_pos(req), blk_rq_sectors(req), req->buffer);
 		host->mg_do_intr = mg_write_intr;
@@ -667,9 +686,6 @@ static unsigned int mg_issue_req(struct request *req,
 		unsigned int sect_num,
 		unsigned int sect_cnt)
 {
-	u16 *buff;
-	u32 i;
-
 	switch (rq_data_dir(req)) {
 	case READ:
 		if (mg_out(host, sect_num, sect_cnt, MG_CMD_RD, &mg_read_intr)
@@ -693,12 +709,7 @@ static unsigned int mg_issue_req(struct request *req,
 			mg_bad_rw_intr(host);
 			return host->error;
 		}
-		buff = (u16 *)req->buffer;
-		for (i = 0; i < MG_SECTOR_SIZE >> 1; i++) {
-			outw(*buff, (unsigned long)host->dev_base +
-					MG_BUFF_OFFSET + (i << 1));
-			buff++;
-		}
+		mg_write_one(host, req);
 		mod_timer(&host->timer, jiffies + 3 * HZ);
 		outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
 				MG_REG_COMMAND);
diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c
new file mode 100644
index 00000000000..13c1aee6aa3
--- /dev/null
+++ b/drivers/block/osdblk.c
@@ -0,0 +1,701 @@
+
+/*
+   osdblk.c -- Export a single SCSI OSD object as a Linux block device
+
+
+   Copyright 2009 Red Hat, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+   Instructions for use
+   --------------------
+
+   1) Map a Linux block device to an existing OSD object.
+
+      In this example, we will use partition id 1234, object id 5678,
+      OSD device /dev/osd1.
+
+      $ echo "1234 5678 /dev/osd1" > /sys/class/osdblk/add
+
+
+   2) List all active blkdev<->object mappings.
+
+      In this example, we have performed step #1 twice, creating two blkdevs,
+      mapped to two separate OSD objects.
+
+      $ cat /sys/class/osdblk/list
+      0 174 1234 5678 /dev/osd1
+      1 179 1994 897123 /dev/osd0
+
+      The columns, in order, are:
+      - blkdev unique id
+      - blkdev assigned major
+      - OSD object partition id
+      - OSD object id
+      - OSD device
+
+
+   3) Remove an active blkdev<->object mapping.
+
+      In this example, we remove the mapping with blkdev unique id 1.
+
+      $ echo 1 > /sys/class/osdblk/remove
+
+
+   NOTE:  The actual creation and deletion of OSD objects is outside the scope
+   of this driver.
+
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <scsi/osd_initiator.h>
+#include <scsi/osd_attributes.h>
+#include <scsi/osd_sec.h>
+#include <scsi/scsi_device.h>
+
+#define DRV_NAME "osdblk"
+#define PFX DRV_NAME ": "
+
+/* #define _OSDBLK_DEBUG */
+#ifdef _OSDBLK_DEBUG
+#define OSDBLK_DEBUG(fmt, a...) \
+	printk(KERN_NOTICE "osdblk @%s:%d: " fmt, __func__, __LINE__, ##a)
+#else
+#define OSDBLK_DEBUG(fmt, a...) \
+	do { if (0) printk(fmt, ##a); } while (0)
+#endif
+
+MODULE_AUTHOR("Jeff Garzik <jeff@garzik.org>");
+MODULE_DESCRIPTION("block device inside an OSD object osdblk.ko");
+MODULE_LICENSE("GPL");
+
+struct osdblk_device;
+
+enum {
+	OSDBLK_MINORS_PER_MAJOR	= 256,		/* max minors per blkdev */
+	OSDBLK_MAX_REQ		= 32,		/* max parallel requests */
+	OSDBLK_OP_TIMEOUT	= 4 * 60,	/* sync OSD req timeout */
+};
+
+struct osdblk_request {
+	struct request		*rq;		/* blk layer request */
+	struct bio		*bio;		/* cloned bio */
+	struct osdblk_device	*osdev;		/* associated blkdev */
+};
+
+struct osdblk_device {
+	int			id;		/* blkdev unique id */
+
+	int			major;		/* blkdev assigned major */
+	struct gendisk		*disk;		/* blkdev's gendisk and rq */
+	struct request_queue	*q;
+
+	struct osd_dev		*osd;		/* associated OSD */
+
+	char			name[32];	/* blkdev name, e.g. osdblk34 */
+
+	spinlock_t		lock;		/* queue lock */
+
+	struct osd_obj_id	obj;		/* OSD partition, obj id */
+	uint8_t			obj_cred[OSD_CAP_LEN]; /* OSD cred */
+
+	struct osdblk_request	req[OSDBLK_MAX_REQ]; /* request table */
+
+	struct list_head	node;
+
+	char			osd_path[0];	/* OSD device path */
+};
+
+static struct class *class_osdblk;		/* /sys/class/osdblk */
+static DEFINE_MUTEX(ctl_mutex);	/* Serialize open/close/setup/teardown */
+static LIST_HEAD(osdblkdev_list);
+
+static struct block_device_operations osdblk_bd_ops = {
+	.owner		= THIS_MODULE,
+};
+
+static const struct osd_attr g_attr_logical_length = ATTR_DEF(
+	OSD_APAGE_OBJECT_INFORMATION, OSD_ATTR_OI_LOGICAL_LENGTH, 8);
+
+static void osdblk_make_credential(u8 cred_a[OSD_CAP_LEN],
+				   const struct osd_obj_id *obj)
+{
+	osd_sec_init_nosec_doall_caps(cred_a, obj, false, true);
+}
+
+/* copied from exofs; move to libosd? */
+/*
+ * Perform a synchronous OSD operation.  copied from exofs; move to libosd?
+ */
+static int osd_sync_op(struct osd_request *or, int timeout, uint8_t *credential)
+{
+	int ret;
+
+	or->timeout = timeout;
+	ret = osd_finalize_request(or, 0, credential, NULL);
+	if (ret)
+		return ret;
+
+	ret = osd_execute_request(or);
+
+	/* osd_req_decode_sense(or, ret); */
+	return ret;
+}
+
+/*
+ * Perform an asynchronous OSD operation.  copied from exofs; move to libosd?
+ */
+static int osd_async_op(struct osd_request *or, osd_req_done_fn *async_done,
+		   void *caller_context, u8 *cred)
+{
+	int ret;
+
+	ret = osd_finalize_request(or, 0, cred, NULL);
+	if (ret)
+		return ret;
+
+	ret = osd_execute_request_async(or, async_done, caller_context);
+
+	return ret;
+}
+
+/* copied from exofs; move to libosd? */
+static int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr)
+{
+	struct osd_attr cur_attr = {.attr_page = 0}; /* start with zeros */
+	void *iter = NULL;
+	int nelem;
+
+	do {
+		nelem = 1;
+		osd_req_decode_get_attr_list(or, &cur_attr, &nelem, &iter);
+		if ((cur_attr.attr_page == attr->attr_page) &&
+		    (cur_attr.attr_id == attr->attr_id)) {
+			attr->len = cur_attr.len;
+			attr->val_ptr = cur_attr.val_ptr;
+			return 0;
+		}
+	} while (iter);
+
+	return -EIO;
+}
+
+static int osdblk_get_obj_size(struct osdblk_device *osdev, u64 *size_out)
+{
+	struct osd_request *or;
+	struct osd_attr attr;
+	int ret;
+
+	/* start request */
+	or = osd_start_request(osdev->osd, GFP_KERNEL);
+	if (!or)
+		return -ENOMEM;
+
+	/* create a get-attributes(length) request */
+	osd_req_get_attributes(or, &osdev->obj);
+
+	osd_req_add_get_attr_list(or, &g_attr_logical_length, 1);
+
+	/* execute op synchronously */
+	ret = osd_sync_op(or, OSDBLK_OP_TIMEOUT, osdev->obj_cred);
+	if (ret)
+		goto out;
+
+	/* extract length from returned attribute info */
+	attr = g_attr_logical_length;
+	ret = extract_attr_from_req(or, &attr);
+	if (ret)
+		goto out;
+
+	*size_out = get_unaligned_be64(attr.val_ptr);
+
+out:
+	osd_end_request(or);
+	return ret;
+
+}
+
+static void osdblk_osd_complete(struct osd_request *or, void *private)
+{
+	struct osdblk_request *orq = private;
+	struct osd_sense_info osi;
+	int ret = osd_req_decode_sense(or, &osi);
+
+	if (ret) {
+		ret = -EIO;
+		OSDBLK_DEBUG("osdblk_osd_complete with err=%d\n", ret);
+	}
+
+	/* complete OSD request */
+	osd_end_request(or);
+
+	/* complete request passed to osdblk by block layer */
+	__blk_end_request_all(orq->rq, ret);
+}
+
+static void bio_chain_put(struct bio *chain)
+{
+	struct bio *tmp;
+
+	while (chain) {
+		tmp = chain;
+		chain = chain->bi_next;
+
+		bio_put(tmp);
+	}
+}
+
+static struct bio *bio_chain_clone(struct bio *old_chain, gfp_t gfpmask)
+{
+	struct bio *tmp, *new_chain = NULL, *tail = NULL;
+
+	while (old_chain) {
+		tmp = bio_kmalloc(gfpmask, old_chain->bi_max_vecs);
+		if (!tmp)
+			goto err_out;
+
+		__bio_clone(tmp, old_chain);
+		tmp->bi_bdev = NULL;
+		gfpmask &= ~__GFP_WAIT;
+		tmp->bi_next = NULL;
+
+		if (!new_chain)
+			new_chain = tail = tmp;
+		else {
+			tail->bi_next = tmp;
+			tail = tmp;
+		}
+
+		old_chain = old_chain->bi_next;
+	}
+
+	return new_chain;
+
+err_out:
+	OSDBLK_DEBUG("bio_chain_clone with err\n");
+	bio_chain_put(new_chain);
+	return NULL;
+}
+
+static void osdblk_rq_fn(struct request_queue *q)
+{
+	struct osdblk_device *osdev = q->queuedata;
+
+	while (1) {
+		struct request *rq;
+		struct osdblk_request *orq;
+		struct osd_request *or;
+		struct bio *bio;
+		bool do_write, do_flush;
+
+		/* peek at request from block layer */
+		rq = blk_fetch_request(q);
+		if (!rq)
+			break;
+
+		/* filter out block requests we don't understand */
+		if (!blk_fs_request(rq) && !blk_barrier_rq(rq)) {
+			blk_end_request_all(rq, 0);
+			continue;
+		}
+
+		/* deduce our operation (read, write, flush) */
+		/* I wish the block layer simplified cmd_type/cmd_flags/cmd[]
+		 * into a clearly defined set of RPC commands:
+		 * read, write, flush, scsi command, power mgmt req,
+		 * driver-specific, etc.
+		 */
+
+		do_flush = (rq->special == (void *) 0xdeadbeefUL);
+		do_write = (rq_data_dir(rq) == WRITE);
+
+		if (!do_flush) { /* osd_flush does not use a bio */
+			/* a bio clone to be passed down to OSD request */
+			bio = bio_chain_clone(rq->bio, GFP_ATOMIC);
+			if (!bio)
+				break;
+		} else
+			bio = NULL;
+
+		/* alloc internal OSD request, for OSD command execution */
+		or = osd_start_request(osdev->osd, GFP_ATOMIC);
+		if (!or) {
+			bio_chain_put(bio);
+			OSDBLK_DEBUG("osd_start_request with err\n");
+			break;
+		}
+
+		orq = &osdev->req[rq->tag];
+		orq->rq = rq;
+		orq->bio = bio;
+		orq->osdev = osdev;
+
+		/* init OSD command: flush, write or read */
+		if (do_flush)
+			osd_req_flush_object(or, &osdev->obj,
+					     OSD_CDB_FLUSH_ALL, 0, 0);
+		else if (do_write)
+			osd_req_write(or, &osdev->obj, blk_rq_pos(rq) * 512ULL,
+				      bio, blk_rq_bytes(rq));
+		else
+			osd_req_read(or, &osdev->obj, blk_rq_pos(rq) * 512ULL,
+				     bio, blk_rq_bytes(rq));
+
+		OSDBLK_DEBUG("%s 0x%x bytes at 0x%llx\n",
+			do_flush ? "flush" : do_write ?
+				"write" : "read", blk_rq_bytes(rq),
+			blk_rq_pos(rq) * 512ULL);
+
+		/* begin OSD command execution */
+		if (osd_async_op(or, osdblk_osd_complete, orq,
+				 osdev->obj_cred)) {
+			osd_end_request(or);
+			blk_requeue_request(q, rq);
+			bio_chain_put(bio);
+			OSDBLK_DEBUG("osd_execute_request_async with err\n");
+			break;
+		}
+
+		/* remove the special 'flush' marker, now that the command
+		 * is executing
+		 */
+		rq->special = NULL;
+	}
+}
+
+static void osdblk_prepare_flush(struct request_queue *q, struct request *rq)
+{
+	/* add driver-specific marker, to indicate that this request
+	 * is a flush command
+	 */
+	rq->special = (void *) 0xdeadbeefUL;
+}
+
+static void osdblk_free_disk(struct osdblk_device *osdev)
+{
+	struct gendisk *disk = osdev->disk;
+
+	if (!disk)
+		return;
+
+	if (disk->flags & GENHD_FL_UP)
+		del_gendisk(disk);
+	if (disk->queue)
+		blk_cleanup_queue(disk->queue);
+	put_disk(disk);
+}
+
+static int osdblk_init_disk(struct osdblk_device *osdev)
+{
+	struct gendisk *disk;
+	struct request_queue *q;
+	int rc;
+	u64 obj_size = 0;
+
+	/* contact OSD, request size info about the object being mapped */
+	rc = osdblk_get_obj_size(osdev, &obj_size);
+	if (rc)
+		return rc;
+
+	/* create gendisk info */
+	disk = alloc_disk(OSDBLK_MINORS_PER_MAJOR);
+	if (!disk)
+		return -ENOMEM;
+
+	sprintf(disk->disk_name, DRV_NAME "%d", osdev->id);
+	disk->major = osdev->major;
+	disk->first_minor = 0;
+	disk->fops = &osdblk_bd_ops;
+	disk->private_data = osdev;
+
+	/* init rq */
+	q = blk_init_queue(osdblk_rq_fn, &osdev->lock);
+	if (!q) {
+		put_disk(disk);
+		return -ENOMEM;
+	}
+
+	/* switch queue to TCQ mode; allocate tag map */
+	rc = blk_queue_init_tags(q, OSDBLK_MAX_REQ, NULL);
+	if (rc) {
+		blk_cleanup_queue(q);
+		put_disk(disk);
+		return rc;
+	}
+
+	/* Set our limits to the lower device limits, because osdblk cannot
+	 * sleep when allocating a lower-request and therefore cannot be
+	 * bouncing.
+	 */
+	blk_queue_stack_limits(q, osd_request_queue(osdev->osd));
+
+	blk_queue_prep_rq(q, blk_queue_start_tag);
+	blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, osdblk_prepare_flush);
+
+	disk->queue = q;
+
+	q->queuedata = osdev;
+
+	osdev->disk = disk;
+	osdev->q = q;
+
+	/* finally, announce the disk to the world */
+	set_capacity(disk, obj_size / 512ULL);
+	add_disk(disk);
+
+	printk(KERN_INFO "%s: Added of size 0x%llx\n",
+		disk->disk_name, (unsigned long long)obj_size);
+
+	return 0;
+}
+
+/********************************************************************
+ * /sys/class/osdblk/
+ *                   add	map OSD object to blkdev
+ *                   remove	unmap OSD object
+ *                   list	show mappings
+ *******************************************************************/
+
+static void class_osdblk_release(struct class *cls)
+{
+	kfree(cls);
+}
+
+static ssize_t class_osdblk_list(struct class *c, char *data)
+{
+	int n = 0;
+	struct list_head *tmp;
+
+	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+
+	list_for_each(tmp, &osdblkdev_list) {
+		struct osdblk_device *osdev;
+
+		osdev = list_entry(tmp, struct osdblk_device, node);
+
+		n += sprintf(data+n, "%d %d %llu %llu %s\n",
+			osdev->id,
+			osdev->major,
+			osdev->obj.partition,
+			osdev->obj.id,
+			osdev->osd_path);
+	}
+
+	mutex_unlock(&ctl_mutex);
+	return n;
+}
+
+static ssize_t class_osdblk_add(struct class *c, const char *buf, size_t count)
+{
+	struct osdblk_device *osdev;
+	ssize_t rc;
+	int irc, new_id = 0;
+	struct list_head *tmp;
+
+	if (!try_module_get(THIS_MODULE))
+		return -ENODEV;
+
+	/* new osdblk_device object */
+	osdev = kzalloc(sizeof(*osdev) + strlen(buf) + 1, GFP_KERNEL);
+	if (!osdev) {
+		rc = -ENOMEM;
+		goto err_out_mod;
+	}
+
+	/* static osdblk_device initialization */
+	spin_lock_init(&osdev->lock);
+	INIT_LIST_HEAD(&osdev->node);
+
+	/* generate unique id: find highest unique id, add one */
+
+	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+
+	list_for_each(tmp, &osdblkdev_list) {
+		struct osdblk_device *osdev;
+
+		osdev = list_entry(tmp, struct osdblk_device, node);
+		if (osdev->id > new_id)
+			new_id = osdev->id + 1;
+	}
+
+	osdev->id = new_id;
+
+	/* add to global list */
+	list_add_tail(&osdev->node, &osdblkdev_list);
+
+	mutex_unlock(&ctl_mutex);
+
+	/* parse add command */
+	if (sscanf(buf, "%llu %llu %s", &osdev->obj.partition, &osdev->obj.id,
+		   osdev->osd_path) != 3) {
+		rc = -EINVAL;
+		goto err_out_slot;
+	}
+
+	/* initialize rest of new object */
+	sprintf(osdev->name, DRV_NAME "%d", osdev->id);
+
+	/* contact requested OSD */
+	osdev->osd = osduld_path_lookup(osdev->osd_path);
+	if (IS_ERR(osdev->osd)) {
+		rc = PTR_ERR(osdev->osd);
+		goto err_out_slot;
+	}
+
+	/* build OSD credential */
+	osdblk_make_credential(osdev->obj_cred, &osdev->obj);
+
+	/* register our block device */
+	irc = register_blkdev(0, osdev->name);
+	if (irc < 0) {
+		rc = irc;
+		goto err_out_osd;
+	}
+
+	osdev->major = irc;
+
+	/* set up and announce blkdev mapping */
+	rc = osdblk_init_disk(osdev);
+	if (rc)
+		goto err_out_blkdev;
+
+	return count;
+
+err_out_blkdev:
+	unregister_blkdev(osdev->major, osdev->name);
+err_out_osd:
+	osduld_put_device(osdev->osd);
+err_out_slot:
+	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+	list_del_init(&osdev->node);
+	mutex_unlock(&ctl_mutex);
+
+	kfree(osdev);
+err_out_mod:
+	OSDBLK_DEBUG("Error adding device %s\n", buf);
+	module_put(THIS_MODULE);
+	return rc;
+}
+
+static ssize_t class_osdblk_remove(struct class *c, const char *buf,
+					size_t count)
+{
+	struct osdblk_device *osdev = NULL;
+	int target_id, rc;
+	unsigned long ul;
+	struct list_head *tmp;
+
+	rc = strict_strtoul(buf, 10, &ul);
+	if (rc)
+		return rc;
+
+	/* convert to int; abort if we lost anything in the conversion */
+	target_id = (int) ul;
+	if (target_id != ul)
+		return -EINVAL;
+
+	/* remove object from list immediately */
+	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+
+	list_for_each(tmp, &osdblkdev_list) {
+		osdev = list_entry(tmp, struct osdblk_device, node);
+		if (osdev->id == target_id) {
+			list_del_init(&osdev->node);
+			break;
+		}
+		osdev = NULL;
+	}
+
+	mutex_unlock(&ctl_mutex);
+
+	if (!osdev)
+		return -ENOENT;
+
+	/* clean up and free blkdev and associated OSD connection */
+	osdblk_free_disk(osdev);
+	unregister_blkdev(osdev->major, osdev->name);
+	osduld_put_device(osdev->osd);
+	kfree(osdev);
+
+	/* release module ref */
+	module_put(THIS_MODULE);
+
+	return count;
+}
+
+static struct class_attribute class_osdblk_attrs[] = {
+	__ATTR(add,	0200, NULL, class_osdblk_add),
+	__ATTR(remove,	0200, NULL, class_osdblk_remove),
+	__ATTR(list,	0444, class_osdblk_list, NULL),
+	__ATTR_NULL
+};
+
+static int osdblk_sysfs_init(void)
+{
+	int ret = 0;
+
+	/*
+	 * create control files in sysfs
+	 * /sys/class/osdblk/...
+	 */
+	class_osdblk = kzalloc(sizeof(*class_osdblk), GFP_KERNEL);
+	if (!class_osdblk)
+		return -ENOMEM;
+
+	class_osdblk->name = DRV_NAME;
+	class_osdblk->owner = THIS_MODULE;
+	class_osdblk->class_release = class_osdblk_release;
+	class_osdblk->class_attrs = class_osdblk_attrs;
+
+	ret = class_register(class_osdblk);
+	if (ret) {
+		kfree(class_osdblk);
+		class_osdblk = NULL;
+		printk(PFX "failed to create class osdblk\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void osdblk_sysfs_cleanup(void)
+{
+	if (class_osdblk)
+		class_destroy(class_osdblk);
+	class_osdblk = NULL;
+}
+
+static int __init osdblk_init(void)
+{
+	int rc;
+
+	rc = osdblk_sysfs_init();
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
+static void __exit osdblk_exit(void)
+{
+	osdblk_sysfs_cleanup();
+}
+
+module_init(osdblk_init);
+module_exit(osdblk_exit);
+
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 83650e00632..99a506f619b 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -1372,8 +1372,10 @@ try_next_bio:
 	wakeup = (pd->write_congestion_on > 0
 	 		&& pd->bio_queue_size <= pd->write_congestion_off);
 	spin_unlock(&pd->lock);
-	if (wakeup)
-		clear_bdi_congested(&pd->disk->queue->backing_dev_info, WRITE);
+	if (wakeup) {
+		clear_bdi_congested(&pd->disk->queue->backing_dev_info,
+					BLK_RW_ASYNC);
+	}
 
 	pkt->sleep_time = max(PACKET_WAIT_TIME, 1);
 	pkt_set_state(pkt, PACKET_WAITING_STATE);
@@ -2592,10 +2594,10 @@ static int pkt_make_request(struct request_queue *q, struct bio *bio)
 	spin_lock(&pd->lock);
 	if (pd->write_congestion_on > 0
 	    && pd->bio_queue_size >= pd->write_congestion_on) {
-		set_bdi_congested(&q->backing_dev_info, WRITE);
+		set_bdi_congested(&q->backing_dev_info, BLK_RW_ASYNC);
 		do {
 			spin_unlock(&pd->lock);
-			congestion_wait(WRITE, HZ);
+			congestion_wait(BLK_RW_ASYNC, HZ);
 			spin_lock(&pd->lock);
 		} while(pd->bio_queue_size > pd->write_congestion_off);
 	}
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 43db3ea15b5..aa1a3d5a3e2 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -213,7 +213,7 @@ static int virtblk_ioctl(struct block_device *bdev, fmode_t mode,
 	 * Only allow the generic SCSI ioctls if the host can support it.
 	 */
 	if (!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_SCSI))
-		return -ENOIOCTLCMD;
+		return -ENOTTY;
 
 	return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp);
 }
@@ -360,6 +360,9 @@ static int __devinit virtblk_probe(struct virtio_device *vdev)
 	blk_queue_max_phys_segments(vblk->disk->queue, vblk->sg_elems-2);
 	blk_queue_max_hw_segments(vblk->disk->queue, vblk->sg_elems-2);
 
+	/* No need to bounce any requests */
+	blk_queue_bounce_limit(vblk->disk->queue, BLK_BOUNCE_ANY);
+
 	/* No real sector limit. */
 	blk_queue_max_sectors(vblk->disk->queue, -1U);
 
@@ -424,7 +427,12 @@ static unsigned int features[] = {
 	VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_IDENTIFY
 };
 
-static struct virtio_driver virtio_blk = {
+/*
+ * virtio_blk causes spurious section mismatch warning by
+ * simultaneously referring to a __devinit and a __devexit function.
+ * Use __refdata to avoid this warning.
+ */
+static struct virtio_driver __refdata virtio_blk = {
 	.feature_table = features,
 	.feature_table_size = ARRAY_SIZE(features),
 	.driver.name =	KBUILD_MODNAME,
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index f08491a3a81..b20abe102a2 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -390,9 +390,10 @@ static inline void ace_dump_mem(void *base, int len)
 
 static void ace_dump_regs(struct ace_device *ace)
 {
-	dev_info(ace->dev, "    ctrl:  %.8x  seccnt/cmd: %.4x      ver:%.4x\n"
-		 KERN_INFO "    status:%.8x  mpu_lba:%.8x  busmode:%4x\n"
-		 KERN_INFO "    error: %.8x  cfg_lba:%.8x  fatstat:%.4x\n",
+	dev_info(ace->dev,
+		 "    ctrl:  %.8x  seccnt/cmd: %.4x      ver:%.4x\n"
+		 "    status:%.8x  mpu_lba:%.8x  busmode:%4x\n"
+		 "    error: %.8x  cfg_lba:%.8x  fatstat:%.4x\n",
 		 ace_in32(ace, ACE_CTRL),
 		 ace_in(ace, ACE_SECCNTCMD),
 		 ace_in(ace, ACE_VERSION),
diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c
index 4575171e5be..b2590409f25 100644
--- a/drivers/block/z2ram.c
+++ b/drivers/block/z2ram.c
@@ -374,7 +374,7 @@ err:
 static void __exit z2_exit(void)
 {
     int i, j;
-    blk_unregister_region(MKDEV(Z2RAM_MAJOR, 0), 256);
+    blk_unregister_region(MKDEV(Z2RAM_MAJOR, 0), Z2MINOR_COUNT);
     unregister_blkdev(Z2RAM_MAJOR, DEVICE_NAME);
     del_gendisk(z2ram_gendisk);
     put_disk(z2ram_gendisk);
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 1df9dda2e37..d5cde6d86f8 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -28,7 +28,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 0bd01f49cfd..6a06913b01d 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -1029,10 +1029,6 @@ config CS5535_GPIO
 
 	  If compiled as a module, it will be called cs5535_gpio.
 
-config GPIO_VR41XX
-	tristate "NEC VR4100 series General-purpose I/O Unit support"
-	depends on CPU_VR41XX
-
 config RAW_DRIVER
 	tristate "RAW driver (/dev/raw/rawN)"
 	depends on BLOCK
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 189efcff08c..66f779ad4f4 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -95,7 +95,6 @@ obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio.o
 obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
 obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
 obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio.o
-obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
 obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
 obj-$(CONFIG_TELCLOCK)		+= tlclk.o
 
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 8c9d50db5c3..c5855779058 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -49,6 +49,7 @@
 #define PCI_DEVICE_ID_INTEL_IGDNG_D_HB	    0x0040
 #define PCI_DEVICE_ID_INTEL_IGDNG_D_IG	    0x0042
 #define PCI_DEVICE_ID_INTEL_IGDNG_M_HB	    0x0044
+#define PCI_DEVICE_ID_INTEL_IGDNG_MA_HB	    0x0062
 #define PCI_DEVICE_ID_INTEL_IGDNG_M_IG	    0x0046
 
 /* cover 915 and 945 variants */
@@ -81,7 +82,8 @@
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB || \
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G41_HB || \
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_D_HB || \
-		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB)
+		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB || \
+		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MA_HB)
 
 extern int agp_memory_reserved;
 
@@ -1216,6 +1218,7 @@ static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size)
 	case PCI_DEVICE_ID_INTEL_G41_HB:
 	case PCI_DEVICE_ID_INTEL_IGDNG_D_HB:
 	case PCI_DEVICE_ID_INTEL_IGDNG_M_HB:
+	case PCI_DEVICE_ID_INTEL_IGDNG_MA_HB:
 		*gtt_offset = *gtt_size = MB(2);
 		break;
 	default:
@@ -2195,6 +2198,8 @@ static const struct intel_driver_description {
 	    "IGDNG/D", NULL, &intel_i965_driver },
 	{ PCI_DEVICE_ID_INTEL_IGDNG_M_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0,
 	    "IGDNG/M", NULL, &intel_i965_driver },
+	{ PCI_DEVICE_ID_INTEL_IGDNG_MA_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0,
+	    "IGDNG/MA", NULL, &intel_i965_driver },
 	{ 0, 0, 0, NULL, NULL, NULL }
 };
 
@@ -2398,6 +2403,7 @@ static struct pci_device_id agp_intel_pci_table[] = {
 	ID(PCI_DEVICE_ID_INTEL_G41_HB),
 	ID(PCI_DEVICE_ID_INTEL_IGDNG_D_HB),
 	ID(PCI_DEVICE_ID_INTEL_IGDNG_M_HB),
+	ID(PCI_DEVICE_ID_INTEL_IGDNG_MA_HB),
 	{ }
 };
 
diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c
index f4bb43fb801..e077701ae3d 100644
--- a/drivers/char/agp/parisc-agp.c
+++ b/drivers/char/agp/parisc-agp.c
@@ -225,7 +225,7 @@ static const struct agp_bridge_driver parisc_agp_driver = {
 	.configure		= parisc_agp_configure,
 	.fetch_size		= parisc_agp_fetch_size,
 	.tlb_flush		= parisc_agp_tlbflush,
-	.mask_memory		= parisc_agp_mask_memory,
+	.mask_memory		= parisc_agp_page_mask_memory,
 	.masks			= parisc_agp_masks,
 	.agp_enable		= parisc_agp_enable,
 	.cache_flush		= global_cache_flush,
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 72429b6b2fa..6c32fbf0716 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -81,6 +81,7 @@ static char *serial_version = "4.30";
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
 
diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c
index 140ea10ecb8..c02db01f736 100644
--- a/drivers/char/bsr.c
+++ b/drivers/char/bsr.c
@@ -27,6 +27,7 @@
 #include <linux/cdev.h>
 #include <linux/list.h>
 #include <linux/mm.h>
+#include <asm/pgtable.h>
 #include <asm/io.h>
 
 /*
@@ -75,12 +76,13 @@ static struct class *bsr_class;
 static int bsr_major;
 
 enum {
-	BSR_8   = 0,
-	BSR_16  = 1,
-	BSR_64  = 2,
-	BSR_128 = 3,
-	BSR_UNKNOWN = 4,
-	BSR_MAX = 5,
+	BSR_8    = 0,
+	BSR_16   = 1,
+	BSR_64   = 2,
+	BSR_128  = 3,
+	BSR_4096 = 4,
+	BSR_UNKNOWN = 5,
+	BSR_MAX  = 6,
 };
 
 static unsigned bsr_types[BSR_MAX];
@@ -117,15 +119,22 @@ static int bsr_mmap(struct file *filp, struct vm_area_struct *vma)
 {
 	unsigned long size   = vma->vm_end - vma->vm_start;
 	struct bsr_dev *dev = filp->private_data;
+	int ret;
 
-	if (size > dev->bsr_len || (size & (PAGE_SIZE-1)))
-		return -EINVAL;
-
-	vma->vm_flags |= (VM_IO | VM_DONTEXPAND);
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 
-	if (io_remap_pfn_range(vma, vma->vm_start, dev->bsr_addr >> PAGE_SHIFT,
-			       size, vma->vm_page_prot))
+	/* check for the case of a small BSR device and map one 4k page for it*/
+	if (dev->bsr_len < PAGE_SIZE && size == PAGE_SIZE)
+		ret = remap_4k_pfn(vma, vma->vm_start, dev->bsr_addr >> 12,
+				   vma->vm_page_prot);
+	else if (size <= dev->bsr_len)
+		ret = io_remap_pfn_range(vma, vma->vm_start,
+					 dev->bsr_addr >> PAGE_SHIFT,
+					 size, vma->vm_page_prot);
+	else
+		return -EINVAL;
+
+	if (ret)
 		return -EAGAIN;
 
 	return 0;
@@ -205,6 +214,11 @@ static int bsr_add_node(struct device_node *bn)
 		cur->bsr_stride = bsr_stride[i];
 		cur->bsr_dev    = MKDEV(bsr_major, i + total_bsr_devs);
 
+		/* if we have a bsr_len of > 4k and less then PAGE_SIZE (64k pages) */
+		/* we can only map 4k of it, so only advertise the 4k in sysfs */
+		if (cur->bsr_len > 4096 && cur->bsr_len < PAGE_SIZE)
+			cur->bsr_len = 4096;
+
 		switch(cur->bsr_bytes) {
 		case 8:
 			cur->bsr_type = BSR_8;
@@ -218,9 +232,11 @@ static int bsr_add_node(struct device_node *bn)
 		case 128:
 			cur->bsr_type = BSR_128;
 			break;
+		case 4096:
+			cur->bsr_type = BSR_4096;
+			break;
 		default:
 			cur->bsr_type = BSR_UNKNOWN;
-			printk(KERN_INFO "unknown BSR size %d\n",cur->bsr_bytes);
 		}
 
 		cur->bsr_num = bsr_types[cur->bsr_type];
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index f3366d3f06c..2dafc2da064 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -633,6 +633,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/serial.h>
+#include <linux/smp_lock.h>
 #include <linux/major.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index abef1f7d84f..ff647ca1c48 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -36,6 +36,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/uaccess.h>
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 94e7e3c8c05..d97779ef72c 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -552,7 +552,7 @@ static int hvc_chars_in_buffer(struct tty_struct *tty)
 	struct hvc_struct *hp = tty->driver_data;
 
 	if (!hp)
-		return -1;
+		return 0;
 	return hp->n_outbuf;
 }
 
diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c
index 5dcbe603eca..91b53eb1c05 100644
--- a/drivers/char/hw_random/intel-rng.c
+++ b/drivers/char/hw_random/intel-rng.c
@@ -305,10 +305,11 @@ static int __init intel_init_hw_struct(struct intel_rng_hw *intel_rng_hw,
 	     (BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK))
 	    == BIOS_CNTL_LOCK_ENABLE_MASK) {
 		static __initdata /*const*/ char warning[] =
-			KERN_WARNING PFX "Firmware space is locked read-only. If you can't or\n"
-			KERN_WARNING PFX "don't want to disable this in firmware setup, and if\n"
-			KERN_WARNING PFX "you are certain that your system has a functional\n"
-			KERN_WARNING PFX "RNG, try using the 'no_fwh_detect' option.\n";
+			KERN_WARNING
+PFX "Firmware space is locked read-only. If you can't or\n"
+PFX "don't want to disable this in firmware setup, and if\n"
+PFX "you are certain that your system has a functional\n"
+PFX "RNG, try using the 'no_fwh_detect' option.\n";
 
 		if (no_fwh_detect)
 			return -ENODEV;
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 4159292e35c..4f1f4cd670d 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -122,6 +122,7 @@
 #include <linux/fs.h>
 #include <linux/sched.h>
 #include <linux/serial.h>
+#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/timer.h>
@@ -1478,10 +1479,10 @@ static int __devinit load_firmware(struct pci_dev *pdev,
 		status = inw(base + 0x4);
 		if (status != 0) {
 			dev_warn(&pdev->dev, "Card%d rejected load header:\n"
-				KERN_WARNING "Address:0x%x\n"
-				KERN_WARNING "Count:0x%x\n"
-				KERN_WARNING "Status:0x%x\n",
-				index + 1, frame->addr, frame->count, status);
+				 "Address:0x%x\n"
+				 "Count:0x%x\n"
+				 "Status:0x%x\n",
+				 index + 1, frame->addr, frame->count, status);
 			goto errrelfw;
 		}
 		outsw(base, frame->data, word_count);
@@ -1526,10 +1527,10 @@ static int __devinit load_firmware(struct pci_dev *pdev,
 		status = inw(base + 0x4);
 		if (status != 0) {
 			dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
-				KERN_WARNING "Address:0x%x\n"
-				KERN_WARNING "Count:0x%x\n"
-				KERN_WARNING "Status: 0x%x\n",
-				index + 1, frame->addr, frame->count, status);
+				 "Address:0x%x\n"
+				 "Count:0x%x\n"
+				 "Status: 0x%x\n",
+				 index + 1, frame->addr, frame->count, status);
 			goto errrelfw;
 		}
 
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 0c999f5bb3d..ab2f3349c5c 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -20,6 +20,7 @@
 
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 65b6ff2442c..dd0083bbb64 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -34,6 +34,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/major.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
 #include <linux/ptrace.h>
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 52d953eb30c..dbf8d52f31d 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -23,6 +23,7 @@
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/timer.h>
 #include <linux/interrupt.h>
 #include <linux/tty.h>
diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index 1c43c8cdee2..c68118efad8 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -97,6 +97,7 @@
 #include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/errno.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>	/* used in new tty drivers */
 #include <linux/signal.h>	/* used in new tty drivers */
 #include <linux/if.h>
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index 2e99158ebb8..6934025a1ac 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -58,6 +58,7 @@
 #include <linux/ioport.h>
 #include <linux/in.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/errno.h>
 #include <linux/string.h>	/* used in new tty drivers */
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 94a5d5020ab..4e28b35024e 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -300,8 +300,7 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
 			if (space < 2)
 				return -1;
 			tty->canon_column = tty->column = 0;
-			tty_put_char(tty, '\r');
-			tty_put_char(tty, c);
+			tty->ops->write(tty, "\r\n", 2);
 			return 2;
 		}
 		tty->canon_column = tty->column;
@@ -1331,9 +1330,6 @@ handle_newline:
 
 static void n_tty_write_wakeup(struct tty_struct *tty)
 {
-	/* Write out any echoed characters that are still pending */
-	process_echoes(tty);
-
 	if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags))
 		kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
 }
@@ -1586,6 +1582,7 @@ static int n_tty_open(struct tty_struct *tty)
 
 static inline int input_available_p(struct tty_struct *tty, int amt)
 {
+	tty_flush_to_ldisc(tty);
 	if (tty->icanon) {
 		if (tty->canon_data)
 			return 1;
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 574f1c79b6e..ec58d8c387f 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -828,7 +828,7 @@ static int receive_data(enum port_type index, struct nozomi *dc)
 	struct port *port = &dc->port[index];
 	void __iomem *addr = port->dl_addr[port->toggle_dl];
 	struct tty_struct *tty = tty_port_tty_get(&port->port);
-	int i;
+	int i, ret;
 
 	if (unlikely(!tty)) {
 		DBG1("tty not open for port: %d?", index);
@@ -844,12 +844,14 @@ static int receive_data(enum port_type index, struct nozomi *dc)
 
 		/* disable interrupt in downlink... */
 		disable_transmit_dl(index, dc);
-		return 0;
+		ret = 0;
+		goto put;
 	}
 
 	if (unlikely(size == 0)) {
 		dev_err(&dc->pdev->dev, "size == 0?\n");
-		return 1;
+		ret = 1;
+		goto put;
 	}
 
 	tty_buffer_request_room(tty, size);
@@ -871,8 +873,10 @@ static int receive_data(enum port_type index, struct nozomi *dc)
 	}
 
 	set_bit(index, &dc->flip);
+	ret = 1;
+put:
 	tty_kref_put(tty);
-	return 1;
+	return ret;
 }
 
 /* Debug for interrupts */
@@ -1862,16 +1866,14 @@ static s32 ntty_chars_in_buffer(struct tty_struct *tty)
 {
 	struct port *port = tty->driver_data;
 	struct nozomi *dc = get_dc_by_tty(tty);
-	s32 rval;
+	s32 rval = 0;
 
 	if (unlikely(!dc || !port)) {
-		rval = -ENODEV;
 		goto exit_in_buffer;
 	}
 
 	if (unlikely(!port->port.count)) {
 		dev_err(&dc->pdev->dev, "No tty open?\n");
-		rval = -ENODEV;
 		goto exit_in_buffer;
 	}
 
diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c
index 569f2f7743a..674b3ab3587 100644
--- a/drivers/char/pcmcia/ipwireless/tty.c
+++ b/drivers/char/pcmcia/ipwireless/tty.c
@@ -320,10 +320,10 @@ static int ipw_chars_in_buffer(struct tty_struct *linux_tty)
 	struct ipw_tty *tty = linux_tty->driver_data;
 
 	if (!tty)
-		return -ENODEV;
+		return 0;
 
 	if (!tty->open_count)
-		return -EINVAL;
+		return 0;
 
 	return tty->tx_bytes_queued;
 }
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index daebe1ba43d..b33d6688e91 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -22,6 +22,7 @@
 #include <linux/major.h>
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/smp_lock.h>
 #include <linux/sysctl.h>
 #include <linux/device.h>
 #include <linux/uaccess.h>
@@ -75,114 +76,82 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
  */
 static void pty_unthrottle(struct tty_struct *tty)
 {
-	struct tty_struct *o_tty = tty->link;
-
-	if (!o_tty)
-		return;
-
-	tty_wakeup(o_tty);
+	tty_wakeup(tty->link);
 	set_bit(TTY_THROTTLED, &tty->flags);
 }
 
-/*
- * WSH 05/24/97: modified to
- *   (1) use space in tty->flip instead of a shared temp buffer
- *	 The flip buffers aren't being used for a pty, so there's lots
- *	 of space available.  The buffer is protected by a per-pty
- *	 semaphore that should almost never come under contention.
- *   (2) avoid redundant copying for cases where count >> receive_room
- * N.B. Calls from user space may now return an error code instead of
- * a count.
+/**
+ *	pty_space	-	report space left for writing
+ *	@to: tty we are writing into
  *
- * FIXME: Our pty_write method is called with our ldisc lock held but
- * not our partners. We can't just wait on the other one blindly without
- * risking deadlocks. At some point when everything has settled down we need
- * to look into making pty_write at least able to sleep over an ldisc change.
+ *	The tty buffers allow 64K but we sneak a peak and clip at 8K this
+ *	allows a lot of overspill room for echo and other fun messes to
+ *	be handled properly
+ */
+
+static int pty_space(struct tty_struct *to)
+{
+	int n = 8192 - to->buf.memory_used;
+	if (n < 0)
+		return 0;
+	return n;
+}
+
+/**
+ *	pty_write		-	write to a pty
+ *	@tty: the tty we write from
+ *	@buf: kernel buffer of data
+ *	@count: bytes to write
  *
- * The return on no ldisc is a bit counter intuitive but the logic works
- * like this. During an ldisc change the other end will flush its buffers. We
- * thus return the full length which is identical to the case where we had
- * proper locking and happened to queue the bytes just before the flush during
- * the ldisc change.
+ *	Our "hardware" write method. Data is coming from the ldisc which
+ *	may be in a non sleeping state. We simply throw this at the other
+ *	end of the link as if we were an IRQ handler receiving stuff for
+ *	the other side of the pty/tty pair.
  */
-static int pty_write(struct tty_struct *tty, const unsigned char *buf,
-								int count)
+
+static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
 {
 	struct tty_struct *to = tty->link;
-	struct tty_ldisc *ld;
-	int c = count;
 
-	if (!to || tty->stopped)
+	if (tty->stopped)
 		return 0;
-	ld = tty_ldisc_ref(to);
-
-	if (ld) {
-		c = to->receive_room;
-		if (c > count)
-			c = count;
-		ld->ops->receive_buf(to, buf, NULL, c);
-		tty_ldisc_deref(ld);
+
+	if (c > 0) {
+		/* Stuff the data into the input queue of the other end */
+		c = tty_insert_flip_string(to, buf, c);
+		/* And shovel */
+		tty_flip_buffer_push(to);
+		tty_wakeup(tty);
 	}
 	return c;
 }
 
+/**
+ *	pty_write_room	-	write space
+ *	@tty: tty we are writing from
+ *
+ *	Report how many bytes the ldisc can send into the queue for
+ *	the other device.
+ */
+
 static int pty_write_room(struct tty_struct *tty)
 {
-	struct tty_struct *to = tty->link;
-
-	if (!to || tty->stopped)
+	if (tty->stopped)
 		return 0;
-
-	return to->receive_room;
+	return pty_space(tty->link);
 }
 
-/*
- *	WSH 05/24/97:  Modified for asymmetric MASTER/SLAVE behavior
- *	The chars_in_buffer() value is used by the ldisc select() function
- *	to hold off writing when chars_in_buffer > WAKEUP_CHARS (== 256).
- *	The pty driver chars_in_buffer() Master/Slave must behave differently:
- *
- *      The Master side needs to allow typed-ahead commands to accumulate
- *      while being canonicalized, so we report "our buffer" as empty until
- *	some threshold is reached, and then report the count. (Any count >
- *	WAKEUP_CHARS is regarded by select() as "full".)  To avoid deadlock
- *	the count returned must be 0 if no canonical data is available to be
- *	read. (The N_TTY ldisc.chars_in_buffer now knows this.)
+/**
+ *	pty_chars_in_buffer	-	characters currently in our tx queue
+ *	@tty: our tty
  *
- *	The Slave side passes all characters in raw mode to the Master side's
- *	buffer where they can be read immediately, so in this case we can
- *	return the true count in the buffer.
+ *	Report how much we have in the transmit queue. As everything is
+ *	instantly at the other end this is easy to implement.
  */
+
 static int pty_chars_in_buffer(struct tty_struct *tty)
 {
-	struct tty_struct *to = tty->link;
-	struct tty_ldisc *ld;
-	int count = 0;
-
-	/* We should get the line discipline lock for "tty->link" */
-	if (!to)
-		return 0;
-	/* We cannot take a sleeping reference here without deadlocking with
-	   an ldisc change - but it doesn't really matter */
-	ld = tty_ldisc_ref(to);
-	if (ld == NULL)
-		return 0;
-
-	/* The ldisc must report 0 if no characters available to be read */
-	if (ld->ops->chars_in_buffer)
-		count = ld->ops->chars_in_buffer(to);
-
-	tty_ldisc_deref(ld);
-
-	if (tty->driver->subtype == PTY_TYPE_SLAVE)
-		return count;
-
-	/* Master side driver ... if the other side's read buffer is less than
-	 * half full, return 0 to allow writers to proceed; otherwise return
-	 * the count.  This leaves a comfortable margin to avoid overflow,
-	 * and still allows half a buffer's worth of typed-ahead commands.
-	 */
-	return (count < N_TTY_BUF_SIZE/2) ? 0 : count;
+	return 0;
 }
 
 /* Set the lock flag on a pty */
@@ -202,20 +171,10 @@ static void pty_flush_buffer(struct tty_struct *tty)
 {
 	struct tty_struct *to = tty->link;
 	unsigned long flags;
-	struct tty_ldisc *ld;
 
 	if (!to)
 		return;
-	ld = tty_ldisc_ref(to);
-
-	/* The other end is changing discipline */
-	if (!ld)
-		return;
-
-	if (ld->ops->flush_buffer)
-		to->ldisc->ops->flush_buffer(to);
-	tty_ldisc_deref(ld);
-
+	/* tty_buffer_flush(to); FIXME */
 	if (to->packet) {
 		spin_lock_irqsave(&tty->ctrl_lock, flags);
 		tty->ctrl_status |= TIOCPKT_FLUSHWRITE;
diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c
index ce81da5b2da..d58c2eb07f0 100644
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/char/rio/rio_linux.c
@@ -44,6 +44,7 @@
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/miscdevice.h>
 #include <linux/init.h>
 
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index 21766045123..171711acf5c 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -47,6 +47,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/tty_flip.h>
+#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
 
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 63d5b628477..0e29a23ec4c 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -73,6 +73,7 @@
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/serial.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
 #include <linux/ptrace.h>
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index f1f24f0ee26..51e7a46787b 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -52,6 +52,7 @@
 #include <linux/interrupt.h>
 #include <linux/serial.h>
 #include <linux/serialP.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
 #include <linux/ptrace.h>
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index e72be4190a4..268e17f9ec3 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -87,6 +87,7 @@
 #include <linux/tty_flip.h>
 #include <linux/mm.h>
 #include <linux/serial.h>
+#include <linux/smp_lock.h>
 #include <linux/fcntl.h>
 #include <linux/major.h>
 #include <linux/delay.h>
@@ -1808,10 +1809,10 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file,
 		if (clear & TIOCM_DTR)
 			port->MSVR &= ~MSVR_DTR;
 	}
-	spin_lock_irqsave(&bp->lock, flags);
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_CAR, port_No(port));
 	sx_out(bp, CD186x_MSVR, port->MSVR);
-	spin_unlock_irqrestore(&bp->lock, flags);
+	spin_unlock(&bp->lock);
 	spin_unlock_irqrestore(&port->lock, flags);
 	func_exit();
 	return 0;
@@ -1832,11 +1833,11 @@ static int sx_send_break(struct tty_struct *tty, int length)
 	port->break_length = SPECIALIX_TPS / HZ * length;
 	port->COR2 |= COR2_ETC;
 	port->IER  |= IER_TXRDY;
-	spin_lock_irqsave(&bp->lock, flags);
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_CAR, port_No(port));
 	sx_out(bp, CD186x_COR2, port->COR2);
 	sx_out(bp, CD186x_IER, port->IER);
-	spin_unlock_irqrestore(&bp->lock, flags);
+	spin_unlock(&bp->lock);
 	spin_unlock_irqrestore(&port->lock, flags);
 	sx_wait_CCR(bp);
 	spin_lock_irqsave(&bp->lock, flags);
@@ -2022,9 +2023,9 @@ static void sx_unthrottle(struct tty_struct *tty)
 	if (sx_crtscts(tty))
 		port->MSVR |= MSVR_DTR;
 	/* Else clause: see remark in "sx_throttle"... */
-	spin_lock_irqsave(&bp->lock, flags);
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_CAR, port_No(port));
-	spin_unlock_irqrestore(&bp->lock, flags);
+	spin_unlock(&bp->lock);
 	if (I_IXOFF(tty)) {
 		spin_unlock_irqrestore(&port->lock, flags);
 		sx_wait_CCR(bp);
@@ -2034,9 +2035,9 @@ static void sx_unthrottle(struct tty_struct *tty)
 		sx_wait_CCR(bp);
 		spin_lock_irqsave(&port->lock, flags);
 	}
-	spin_lock_irqsave(&bp->lock, flags);
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_MSVR, port->MSVR);
-	spin_unlock_irqrestore(&bp->lock, flags);
+	spin_unlock(&bp->lock);
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	func_exit();
@@ -2060,10 +2061,10 @@ static void sx_stop(struct tty_struct *tty)
 
 	spin_lock_irqsave(&port->lock, flags);
 	port->IER &= ~IER_TXRDY;
-	spin_lock_irqsave(&bp->lock, flags);
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_CAR, port_No(port));
 	sx_out(bp, CD186x_IER, port->IER);
-	spin_unlock_irqrestore(&bp->lock, flags);
+	spin_unlock(&bp->lock);
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	func_exit();
@@ -2088,10 +2089,10 @@ static void sx_start(struct tty_struct *tty)
 	spin_lock_irqsave(&port->lock, flags);
 	if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
 		port->IER |= IER_TXRDY;
-		spin_lock_irqsave(&bp->lock, flags);
+		spin_lock(&bp->lock);
 		sx_out(bp, CD186x_CAR, port_No(port));
 		sx_out(bp, CD186x_IER, port->IER);
-		spin_unlock_irqrestore(&bp->lock, flags);
+		spin_unlock(&bp->lock);
 	}
 	spin_unlock_irqrestore(&port->lock, flags);
 
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index 518f2a25d91..a81ec4fcf6f 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -216,6 +216,7 @@
 #include <linux/eisa.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/miscdevice.h>
 #include <linux/bitops.h>
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index afded3a2379..813552f1488 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -81,6 +81,7 @@
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/delay.h>
 #include <linux/netdevice.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index a2e67e6df3a..91f20a92fdd 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -62,6 +62,7 @@
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/netdevice.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 6f727e3c53a..8d4a2a8a0a7 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -52,6 +52,7 @@
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/netdevice.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 0db35857e4d..5d7a02f63e1 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -35,7 +35,6 @@
 #include <linux/spinlock.h>
 #include <linux/vt_kern.h>
 #include <linux/workqueue.h>
-#include <linux/kexec.h>
 #include <linux/hrtimer.h>
 #include <linux/oom.h>
 
@@ -124,9 +123,12 @@ static struct sysrq_key_op sysrq_unraw_op = {
 static void sysrq_handle_crash(int key, struct tty_struct *tty)
 {
 	char *killer = NULL;
+
+	panic_on_oops = 1;	/* force panic */
+	wmb();
 	*killer = 1;
 }
-static struct sysrq_key_op sysrq_crashdump_op = {
+static struct sysrq_key_op sysrq_crash_op = {
 	.handler	= sysrq_handle_crash,
 	.help_msg	= "Crash",
 	.action_msg	= "Trigger a crash",
@@ -401,7 +403,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
 	 */
 	NULL,				/* a */
 	&sysrq_reboot_op,		/* b */
-	&sysrq_crashdump_op,		/* c & ibm_emac driver debug */
+	&sysrq_crash_op,		/* c & ibm_emac driver debug */
 	&sysrq_showlocks_op,		/* d */
 	&sysrq_term_op,			/* e */
 	&sysrq_moom_op,			/* f */
diff --git a/drivers/char/tb0219.c b/drivers/char/tb0219.c
index 6062b62800f..b3ec9b10e29 100644
--- a/drivers/char/tb0219.c
+++ b/drivers/char/tb0219.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for TANBAC TB0219 base board.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -28,7 +28,7 @@
 #include <asm/vr41xx/giu.h>
 #include <asm/vr41xx/tb0219.h>
 
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
 MODULE_DESCRIPTION("TANBAC TB0219 base board driver");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index ccdd828adce..b0603b2e568 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -26,7 +26,6 @@
 #include <linux/poll.h>
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
-#include <linux/smp_lock.h>
 
 #include "tpm.h"
 
diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c
index 810ee25d66a..3108991c5c8 100644
--- a/drivers/char/tty_buffer.c
+++ b/drivers/char/tty_buffer.c
@@ -462,6 +462,19 @@ static void flush_to_ldisc(struct work_struct *work)
 }
 
 /**
+ *	tty_flush_to_ldisc
+ *	@tty: tty to push
+ *
+ *	Push the terminal flip buffers to the line discipline.
+ *
+ *	Must not be called from IRQ context.
+ */
+void tty_flush_to_ldisc(struct tty_struct *tty)
+{
+	flush_to_ldisc(&tty->buf.work.work);
+}
+
+/**
  *	tty_flip_buffer_push	-	terminal
  *	@tty: tty to push
  *
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index b24f6c6a1ea..ad6ba4ed280 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -21,7 +21,6 @@
 #include <linux/module.h>
 #include <linux/bitops.h>
 #include <linux/mutex.h>
-#include <linux/smp_lock.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index a19e935847b..e48af9f7921 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -21,7 +21,6 @@
 #include <linux/proc_fs.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/wait.h>
 #include <linux/bitops.h>
@@ -49,6 +48,41 @@ static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
 /* Line disc dispatch table */
 static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
 
+static inline struct tty_ldisc *get_ldisc(struct tty_ldisc *ld)
+{
+	if (ld)
+		atomic_inc(&ld->users);
+	return ld;
+}
+
+static void put_ldisc(struct tty_ldisc *ld)
+{
+	unsigned long flags;
+
+	if (WARN_ON_ONCE(!ld))
+		return;
+
+	/*
+	 * If this is the last user, free the ldisc, and
+	 * release the ldisc ops.
+	 *
+	 * We really want an "atomic_dec_and_lock_irqsave()",
+	 * but we don't have it, so this does it by hand.
+	 */
+	local_irq_save(flags);
+	if (atomic_dec_and_lock(&ld->users, &tty_ldisc_lock)) {
+		struct tty_ldisc_ops *ldo = ld->ops;
+
+		ldo->refcount--;
+		module_put(ldo->owner);
+		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+
+		kfree(ld);
+		return;
+	}
+	local_irq_restore(flags);
+}
+
 /**
  *	tty_register_ldisc	-	install a line discipline
  *	@disc: ldisc number
@@ -143,7 +177,7 @@ static struct tty_ldisc *tty_ldisc_try_get(int disc)
 			/* lock it */
 			ldops->refcount++;
 			ld->ops = ldops;
-			ld->refcount = 0;
+			atomic_set(&ld->users, 1);
 			err = 0;
 		}
 	}
@@ -182,35 +216,6 @@ static struct tty_ldisc *tty_ldisc_get(int disc)
 	return ld;
 }
 
-/**
- *	tty_ldisc_put		-	drop ldisc reference
- *	@ld: ldisc
- *
- *	Drop a reference to a line discipline. Manage refcounts and
- *	module usage counts. Free the ldisc once the recount hits zero.
- *
- *	Locking:
- *		takes tty_ldisc_lock to guard against ldisc races
- */
-
-static void tty_ldisc_put(struct tty_ldisc *ld)
-{
-	unsigned long flags;
-	int disc = ld->ops->num;
-	struct tty_ldisc_ops *ldo;
-
-	BUG_ON(disc < N_TTY || disc >= NR_LDISCS);
-
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	ldo = tty_ldiscs[disc];
-	BUG_ON(ldo->refcount == 0);
-	ldo->refcount--;
-	module_put(ldo->owner);
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	WARN_ON(ld->refcount);
-	kfree(ld);
-}
-
 static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
 {
 	return (*pos < NR_LDISCS) ? pos : NULL;
@@ -235,7 +240,7 @@ static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
 	if (IS_ERR(ld))
 		return 0;
 	seq_printf(m, "%-10s %2d\n", ld->ops->name ? ld->ops->name : "???", i);
-	tty_ldisc_put(ld);
+	put_ldisc(ld);
 	return 0;
 }
 
@@ -289,20 +294,17 @@ static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
  *	Locking: takes tty_ldisc_lock
  */
 
-static int tty_ldisc_try(struct tty_struct *tty)
+static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty)
 {
 	unsigned long flags;
 	struct tty_ldisc *ld;
-	int ret = 0;
 
 	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	ld = tty->ldisc;
-	if (test_bit(TTY_LDISC, &tty->flags)) {
-		ld->refcount++;
-		ret = 1;
-	}
+	ld = NULL;
+	if (test_bit(TTY_LDISC, &tty->flags))
+		ld = get_ldisc(tty->ldisc);
 	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	return ret;
+	return ld;
 }
 
 /**
@@ -323,10 +325,11 @@ static int tty_ldisc_try(struct tty_struct *tty)
 
 struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
 {
+	struct tty_ldisc *ld;
+
 	/* wait_event is a macro */
-	wait_event(tty_ldisc_wait, tty_ldisc_try(tty));
-	WARN_ON(tty->ldisc->refcount == 0);
-	return tty->ldisc;
+	wait_event(tty_ldisc_wait, (ld = tty_ldisc_try(tty)) != NULL);
+	return ld;
 }
 EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
 
@@ -343,9 +346,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
 
 struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
 {
-	if (tty_ldisc_try(tty))
-		return tty->ldisc;
-	return NULL;
+	return tty_ldisc_try(tty);
 }
 EXPORT_SYMBOL_GPL(tty_ldisc_ref);
 
@@ -361,21 +362,15 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref);
 
 void tty_ldisc_deref(struct tty_ldisc *ld)
 {
-	unsigned long flags;
-
-	BUG_ON(ld == NULL);
-
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	if (ld->refcount == 0)
-		printk(KERN_ERR "tty_ldisc_deref: no references.\n");
-	else
-		ld->refcount--;
-	if (ld->refcount == 0)
-		wake_up(&tty_ldisc_wait);
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	put_ldisc(ld);
 }
 EXPORT_SYMBOL_GPL(tty_ldisc_deref);
 
+static inline void tty_ldisc_put(struct tty_ldisc *ld)
+{
+	put_ldisc(ld);
+}
+
 /**
  *	tty_ldisc_enable	-	allow ldisc use
  *	@tty: terminal to activate ldisc on
@@ -513,8 +508,9 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
  *	be obtained while the delayed work queue halt ensures that no more
  *	data is fed to the ldisc.
  *
- *	In order to wait for any existing references to complete see
- *	tty_ldisc_wait_idle.
+ *	You need to do a 'flush_scheduled_work()' (outside the ldisc_mutex)
+ *	in order to make sure any currently executing ldisc work is also
+ *	flushed.
  */
 
 static int tty_ldisc_halt(struct tty_struct *tty)
@@ -524,31 +520,6 @@ static int tty_ldisc_halt(struct tty_struct *tty)
 }
 
 /**
- *	tty_ldisc_wait_idle	-	wait for the ldisc to become idle
- *	@tty: tty to wait for
- *
- *	Wait for the line discipline to become idle. The discipline must
- *	have been halted for this to guarantee it remains idle.
- *
- *	tty_ldisc_lock protects the ref counts currently.
- */
-
-static int tty_ldisc_wait_idle(struct tty_struct *tty)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	while (tty->ldisc->refcount) {
-		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-		if (wait_event_timeout(tty_ldisc_wait,
-				tty->ldisc->refcount == 0, 5 * HZ) == 0)
-			return -EBUSY;
-		spin_lock_irqsave(&tty_ldisc_lock, flags);
-	}
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	return 0;
-}
-
-/**
  *	tty_set_ldisc		-	set line discipline
  *	@tty: the terminal to set
  *	@ldisc: the line discipline
@@ -643,14 +614,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	flush_scheduled_work();
 
-	/* Let any existing reference holders finish */
-	retval = tty_ldisc_wait_idle(tty);
-	if (retval < 0) {
-		clear_bit(TTY_LDISC_CHANGING, &tty->flags);
-		tty_ldisc_put(new_ldisc);
-		return retval;
-	}
-
 	mutex_lock(&tty->ldisc_mutex);
 	if (test_bit(TTY_HUPPED, &tty->flags)) {
 		/* We were raced by the hangup method. It will have stomped
@@ -791,17 +754,22 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 	 * N_TTY.
 	 */
 	if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
-		/* Avoid racing set_ldisc */
-		mutex_lock(&tty->ldisc_mutex);
-		/* Switch back to N_TTY */
+		/* Make sure the old ldisc is quiescent */
 		tty_ldisc_halt(tty);
-		tty_ldisc_wait_idle(tty);
-		tty_ldisc_reinit(tty);
-		/* At this point we have a closed ldisc and we want to
-		   reopen it. We could defer this to the next open but
-		   it means auditing a lot of other paths so this is a FIXME */
-		WARN_ON(tty_ldisc_open(tty, tty->ldisc));
-		tty_ldisc_enable(tty);
+		flush_scheduled_work();
+
+		/* Avoid racing set_ldisc or tty_ldisc_release */
+		mutex_lock(&tty->ldisc_mutex);
+		if (tty->ldisc) {	/* Not yet closed */
+			/* Switch back to N_TTY */
+			tty_ldisc_reinit(tty);
+			/* At this point we have a closed ldisc and we want to
+			   reopen it. We could defer this to the next open but
+			   it means auditing a lot of other paths so this is
+			   a FIXME */
+			WARN_ON(tty_ldisc_open(tty, tty->ldisc));
+			tty_ldisc_enable(tty);
+		}
 		mutex_unlock(&tty->ldisc_mutex);
 		tty_reset_termios(tty);
 	}
@@ -858,24 +826,25 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 	tty_ldisc_halt(tty);
 	flush_scheduled_work();
 
+	mutex_lock(&tty->ldisc_mutex);
 	/*
-	 * Wait for any short term users (we know they are just driver
-	 * side waiters as the file is closing so user count on the file
-	 * side is zero.
+	 * Now kill off the ldisc
 	 */
+	tty_ldisc_close(tty, tty->ldisc);
+	tty_ldisc_put(tty->ldisc);
+	/* Force an oops if we mess this up */
+	tty->ldisc = NULL;
 
-	tty_ldisc_wait_idle(tty);
-
-	/*
-	 * Shutdown the current line discipline, and reset it to N_TTY.
-	 *
-	 * FIXME: this MUST get fixed for the new reflocking
-	 */
+	/* Ensure the next open requests the N_TTY ldisc */
+	tty_set_termios_ldisc(tty, N_TTY);
+	mutex_unlock(&tty->ldisc_mutex);
 
-	tty_ldisc_reinit(tty);
 	/* This will need doing differently if we need to lock */
 	if (o_tty)
 		tty_ldisc_release(o_tty, NULL);
+
+	/* And the memory resources remaining (buffers, termios) will be
+	   disposed of when the kref hits zero */
 }
 
 /**
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 4e862a75f7f..9769b1149f7 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -267,7 +267,7 @@ int tty_port_block_til_ready(struct tty_port *port,
 	if (retval == 0)
 		port->flags |= ASYNC_NORMAL_ACTIVE;
 	spin_unlock_irqrestore(&port->lock, flags);
-	return 0;
+	return retval;
 	
 }
 EXPORT_SYMBOL(tty_port_block_til_ready);
diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c
index d94d25c12aa..c1791a63d99 100644
--- a/drivers/char/vc_screen.c
+++ b/drivers/char/vc_screen.c
@@ -495,11 +495,15 @@ void vcs_remove_sysfs(int index)
 
 int __init vcs_init(void)
 {
+	unsigned int i;
+
 	if (register_chrdev(VCS_MAJOR, "vcs", &vcs_fops))
 		panic("unable to get major %d for vcs device", VCS_MAJOR);
 	vc_class = class_create(THIS_MODULE, "vc");
 
 	device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs");
 	device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa");
+	for (i = 0; i < MIN_NR_CONSOLES; i++)
+		vcs_make_sysfs(i);
 	return 0;
 }
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index d9113b4c76e..404f4c1ee43 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -89,6 +89,7 @@
 #include <linux/mutex.h>
 #include <linux/vt_kern.h>
 #include <linux/selection.h>
+#include <linux/smp_lock.h>
 #include <linux/tiocl.h>
 #include <linux/kbd_kern.h>
 #include <linux/consolemap.h>
@@ -769,14 +770,12 @@ int vc_allocate(unsigned int currcons)	/* return 0 on success */
 	    visual_init(vc, currcons, 1);
 	    if (!*vc->vc_uni_pagedir_loc)
 		con_set_default_unimap(vc);
-	    if (!vc->vc_kmalloced)
-		vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL);
+	    vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL);
 	    if (!vc->vc_screenbuf) {
 		kfree(vc);
 		vc_cons[currcons].d = NULL;
 		return -ENOMEM;
 	    }
-	    vc->vc_kmalloced = 1;
 	    vc_init(vc, vc->vc_rows, vc->vc_cols, 1);
 	    vcs_make_sysfs(currcons);
 	    atomic_notifier_call_chain(&vt_notifier_list, VT_ALLOCATE, &param);
@@ -912,10 +911,8 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
 	if (new_scr_end > new_origin)
 		scr_memsetw((void *)new_origin, vc->vc_video_erase_char,
 			    new_scr_end - new_origin);
-	if (vc->vc_kmalloced)
-		kfree(vc->vc_screenbuf);
+	kfree(vc->vc_screenbuf);
 	vc->vc_screenbuf = newscreen;
-	vc->vc_kmalloced = 1;
 	vc->vc_screenbuf_size = new_screen_size;
 	set_origin(vc);
 
@@ -994,8 +991,7 @@ void vc_deallocate(unsigned int currcons)
 		vc->vc_sw->con_deinit(vc);
 		put_pid(vc->vt_pid);
 		module_put(vc->vc_sw->owner);
-		if (vc->vc_kmalloced)
-			kfree(vc->vc_screenbuf);
+		kfree(vc->vc_screenbuf);
 		if (currcons >= MIN_NR_CONSOLES)
 			kfree(vc);
 		vc_cons[currcons].d = NULL;
@@ -2880,7 +2876,6 @@ static int __init con_init(void)
 		INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
 		visual_init(vc, currcons, 1);
 		vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT);
-		vc->vc_kmalloced = 0;
 		vc_init(vc, vc->vc_rows, vc->vc_cols,
 			currcons || !vc->vc_sw->con_save_screen);
 	}
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 7539bed0f7e..95189f288f8 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -25,6 +25,7 @@
 #include <linux/console.h>
 #include <linux/consolemap.h>
 #include <linux/signal.h>
+#include <linux/smp_lock.h>
 #include <linux/timex.h>
 
 #include <asm/io.h>
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 2964f5f4a7e..6b3e0c2f33e 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -40,6 +40,7 @@ struct sh_cmt_priv {
 	struct platform_device *pdev;
 
 	unsigned long flags;
+	unsigned long flags_suspend;
 	unsigned long match_value;
 	unsigned long next_match_value;
 	unsigned long max_match_value;
@@ -667,11 +668,38 @@ static int __devexit sh_cmt_remove(struct platform_device *pdev)
 	return -EBUSY; /* cannot unregister clockevent and clocksource */
 }
 
+static int sh_cmt_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sh_cmt_priv *p = platform_get_drvdata(pdev);
+
+	/* save flag state and stop CMT channel */
+	p->flags_suspend = p->flags;
+	sh_cmt_stop(p, p->flags);
+	return 0;
+}
+
+static int sh_cmt_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sh_cmt_priv *p = platform_get_drvdata(pdev);
+
+	/* start CMT channel from saved state */
+	sh_cmt_start(p, p->flags_suspend);
+	return 0;
+}
+
+static struct dev_pm_ops sh_cmt_dev_pm_ops = {
+	.suspend = sh_cmt_suspend,
+	.resume = sh_cmt_resume,
+};
+
 static struct platform_driver sh_cmt_device_driver = {
 	.probe		= sh_cmt_probe,
 	.remove		= __devexit_p(sh_cmt_remove),
 	.driver		= {
 		.name	= "sh_cmt",
+		.pm	= &sh_cmt_dev_pm_ops,
 	}
 };
 
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 9ffb05f4095..93c2322feab 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -161,7 +161,7 @@ static void sh_tmu_set_next(struct sh_tmu_priv *p, unsigned long delta,
 	if (periodic)
 		sh_tmu_write(p, TCOR, delta);
 	else
-		sh_tmu_write(p, TCOR, 0);
+		sh_tmu_write(p, TCOR, 0xffffffff);
 
 	sh_tmu_write(p, TCNT, delta);
 
diff --git a/drivers/connector/cn_queue.c b/drivers/connector/cn_queue.c
index c769ef269fb..408c2af25d5 100644
--- a/drivers/connector/cn_queue.c
+++ b/drivers/connector/cn_queue.c
@@ -1,7 +1,7 @@
 /*
  * 	cn_queue.c
  *
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index fd336c5a905..08b2500f21e 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -1,7 +1,7 @@
 /*
  * 	connector.c
  *
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -33,7 +33,7 @@
 #include <net/sock.h>
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
 MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector.");
 
 static u32 cn_idx = CN_IDX_CONNECTOR;
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 6e2ec0b1894..2968ed6a9c4 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -761,6 +761,10 @@ static struct kobj_type ktype_cpufreq = {
  * cpufreq_add_dev - add a CPU device
  *
  * Adds the cpufreq interface for a CPU device.
+ *
+ * The Oracle says: try running cpufreq registration/unregistration concurrently
+ * with with cpu hotplugging and all hell will break loose. Tried to clean this
+ * mess up, but more thorough testing is needed. - Mathieu
  */
 static int cpufreq_add_dev(struct sys_device *sys_dev)
 {
@@ -772,9 +776,6 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	struct sys_device *cpu_sys_dev;
 	unsigned long flags;
 	unsigned int j;
-#ifdef CONFIG_SMP
-	struct cpufreq_policy *managed_policy;
-#endif
 
 	if (cpu_is_offline(cpu))
 		return 0;
@@ -804,15 +805,12 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 		goto nomem_out;
 	}
 	if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL)) {
-		kfree(policy);
 		ret = -ENOMEM;
-		goto nomem_out;
+		goto err_free_policy;
 	}
 	if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) {
-		free_cpumask_var(policy->cpus);
-		kfree(policy);
 		ret = -ENOMEM;
-		goto nomem_out;
+		goto err_free_cpumask;
 	}
 
 	policy->cpu = cpu;
@@ -820,7 +818,8 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 
 	/* Initially set CPU itself as the policy_cpu */
 	per_cpu(policy_cpu, cpu) = cpu;
-	lock_policy_rwsem_write(cpu);
+	ret = (lock_policy_rwsem_write(cpu) < 0);
+	WARN_ON(ret);
 
 	init_completion(&policy->kobj_unregister);
 	INIT_WORK(&policy->update, handle_update);
@@ -833,7 +832,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	ret = cpufreq_driver->init(policy);
 	if (ret) {
 		dprintk("initialization failed\n");
-		goto err_out;
+		goto err_unlock_policy;
 	}
 	policy->user_policy.min = policy->min;
 	policy->user_policy.max = policy->max;
@@ -852,21 +851,31 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 #endif
 
 	for_each_cpu(j, policy->cpus) {
+		struct cpufreq_policy *managed_policy;
+
 		if (cpu == j)
 			continue;
 
 		/* Check for existing affected CPUs.
 		 * They may not be aware of it due to CPU Hotplug.
+		 * cpufreq_cpu_put is called when the device is removed
+		 * in __cpufreq_remove_dev()
 		 */
-		managed_policy = cpufreq_cpu_get(j);		/* FIXME: Where is this released?  What about error paths? */
+		managed_policy = cpufreq_cpu_get(j);
 		if (unlikely(managed_policy)) {
 
 			/* Set proper policy_cpu */
 			unlock_policy_rwsem_write(cpu);
 			per_cpu(policy_cpu, cpu) = managed_policy->cpu;
 
-			if (lock_policy_rwsem_write(cpu) < 0)
-				goto err_out_driver_exit;
+			if (lock_policy_rwsem_write(cpu) < 0) {
+				/* Should not go through policy unlock path */
+				if (cpufreq_driver->exit)
+					cpufreq_driver->exit(policy);
+				ret = -EBUSY;
+				cpufreq_cpu_put(managed_policy);
+				goto err_free_cpumask;
+			}
 
 			spin_lock_irqsave(&cpufreq_driver_lock, flags);
 			cpumask_copy(managed_policy->cpus, policy->cpus);
@@ -878,11 +887,13 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 						&managed_policy->kobj,
 						"cpufreq");
 			if (ret)
-				goto err_out_driver_exit;
-
-			cpufreq_debug_enable_ratelimit();
-			ret = 0;
-			goto err_out_driver_exit; /* call driver->exit() */
+				cpufreq_cpu_put(managed_policy);
+			/*
+			 * Success. We only needed to be added to the mask.
+			 * Call driver->exit() because only the cpu parent of
+			 * the kobj needed to call init().
+			 */
+			goto out_driver_exit; /* call driver->exit() */
 		}
 	}
 #endif
@@ -892,29 +903,31 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
 				   "cpufreq");
 	if (ret)
-		goto err_out_driver_exit;
+		goto out_driver_exit;
 
 	/* set up files for this cpu device */
 	drv_attr = cpufreq_driver->attr;
 	while ((drv_attr) && (*drv_attr)) {
 		ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
 		if (ret)
-			goto err_out_driver_exit;
+			goto err_out_kobj_put;
 		drv_attr++;
 	}
 	if (cpufreq_driver->get) {
 		ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
 		if (ret)
-			goto err_out_driver_exit;
+			goto err_out_kobj_put;
 	}
 	if (cpufreq_driver->target) {
 		ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
 		if (ret)
-			goto err_out_driver_exit;
+			goto err_out_kobj_put;
 	}
 
 	spin_lock_irqsave(&cpufreq_driver_lock, flags);
 	for_each_cpu(j, policy->cpus) {
+		if (!cpu_online(j))
+			continue;
 		per_cpu(cpufreq_cpu_data, j) = policy;
 		per_cpu(policy_cpu, j) = policy->cpu;
 	}
@@ -922,18 +935,22 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 
 	/* symlink affected CPUs */
 	for_each_cpu(j, policy->cpus) {
+		struct cpufreq_policy *managed_policy;
+
 		if (j == cpu)
 			continue;
 		if (!cpu_online(j))
 			continue;
 
 		dprintk("CPU %u already managed, adding link\n", j);
-		cpufreq_cpu_get(cpu);
+		managed_policy = cpufreq_cpu_get(cpu);
 		cpu_sys_dev = get_cpu_sysdev(j);
 		ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj,
 					"cpufreq");
-		if (ret)
+		if (ret) {
+			cpufreq_cpu_put(managed_policy);
 			goto err_out_unregister;
+		}
 	}
 
 	policy->governor = NULL; /* to assure that the starting sequence is
@@ -965,17 +982,20 @@ err_out_unregister:
 		per_cpu(cpufreq_cpu_data, j) = NULL;
 	spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
 
+err_out_kobj_put:
 	kobject_put(&policy->kobj);
 	wait_for_completion(&policy->kobj_unregister);
 
-err_out_driver_exit:
+out_driver_exit:
 	if (cpufreq_driver->exit)
 		cpufreq_driver->exit(policy);
 
-err_out:
+err_unlock_policy:
 	unlock_policy_rwsem_write(cpu);
+err_free_cpumask:
+	free_cpumask_var(policy->cpus);
+err_free_policy:
 	kfree(policy);
-
 nomem_out:
 	module_put(cpufreq_driver->owner);
 module_out:
@@ -1070,8 +1090,6 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev)
 	spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
 #endif
 
-	unlock_policy_rwsem_write(cpu);
-
 	if (cpufreq_driver->target)
 		__cpufreq_governor(data, CPUFREQ_GOV_STOP);
 
@@ -1088,6 +1106,8 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev)
 	if (cpufreq_driver->exit)
 		cpufreq_driver->exit(data);
 
+	unlock_policy_rwsem_write(cpu);
+
 	free_cpumask_var(data->related_cpus);
 	free_cpumask_var(data->cpus);
 	kfree(data);
@@ -1228,9 +1248,9 @@ EXPORT_SYMBOL(cpufreq_get);
 
 static int cpufreq_suspend(struct sys_device *sysdev, pm_message_t pmsg)
 {
-	int cpu = sysdev->id;
 	int ret = 0;
-	unsigned int cur_freq = 0;
+
+	int cpu = sysdev->id;
 	struct cpufreq_policy *cpu_policy;
 
 	dprintk("suspending cpu %u\n", cpu);
@@ -1253,42 +1273,9 @@ static int cpufreq_suspend(struct sys_device *sysdev, pm_message_t pmsg)
 
 	if (cpufreq_driver->suspend) {
 		ret = cpufreq_driver->suspend(cpu_policy, pmsg);
-		if (ret) {
+		if (ret)
 			printk(KERN_ERR "cpufreq: suspend failed in ->suspend "
 					"step on CPU %u\n", cpu_policy->cpu);
-			goto out;
-		}
-	}
-
-	if (cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)
-		goto out;
-
-	if (cpufreq_driver->get)
-		cur_freq = cpufreq_driver->get(cpu_policy->cpu);
-
-	if (!cur_freq || !cpu_policy->cur) {
-		printk(KERN_ERR "cpufreq: suspend failed to assert current "
-		       "frequency is what timing core thinks it is.\n");
-		goto out;
-	}
-
-	if (unlikely(cur_freq != cpu_policy->cur)) {
-		struct cpufreq_freqs freqs;
-
-		if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
-			dprintk("Warning: CPU frequency is %u, "
-			       "cpufreq assumed %u kHz.\n",
-			       cur_freq, cpu_policy->cur);
-
-		freqs.cpu = cpu;
-		freqs.old = cpu_policy->cur;
-		freqs.new = cur_freq;
-
-		srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
-				    CPUFREQ_SUSPENDCHANGE, &freqs);
-		adjust_jiffies(CPUFREQ_SUSPENDCHANGE, &freqs);
-
-		cpu_policy->cur = cur_freq;
 	}
 
 out:
@@ -1300,14 +1287,17 @@ out:
  *	cpufreq_resume -  restore proper CPU frequency handling after resume
  *
  *	1.) resume CPUfreq hardware support (cpufreq_driver->resume())
- *	2.) if ->target and !CPUFREQ_CONST_LOOPS: verify we're in sync
- *	3.) schedule call cpufreq_update_policy() ASAP as interrupts are
- *	    restored.
+ *	2.) schedule call cpufreq_update_policy() ASAP as interrupts are
+ *	    restored. It will verify that the current freq is in sync with
+ *	    what we believe it to be. This is a bit later than when it
+ *	    should be, but nonethteless it's better than calling
+ *	    cpufreq_driver->get() here which might re-enable interrupts...
  */
 static int cpufreq_resume(struct sys_device *sysdev)
 {
-	int cpu = sysdev->id;
 	int ret = 0;
+
+	int cpu = sysdev->id;
 	struct cpufreq_policy *cpu_policy;
 
 	dprintk("resuming cpu %u\n", cpu);
@@ -1337,42 +1327,8 @@ static int cpufreq_resume(struct sys_device *sysdev)
 		}
 	}
 
-	if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
-		unsigned int cur_freq = 0;
-
-		if (cpufreq_driver->get)
-			cur_freq = cpufreq_driver->get(cpu_policy->cpu);
-
-		if (!cur_freq || !cpu_policy->cur) {
-			printk(KERN_ERR "cpufreq: resume failed to assert "
-					"current frequency is what timing core "
-					"thinks it is.\n");
-			goto out;
-		}
-
-		if (unlikely(cur_freq != cpu_policy->cur)) {
-			struct cpufreq_freqs freqs;
-
-			if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
-				dprintk("Warning: CPU frequency "
-				       "is %u, cpufreq assumed %u kHz.\n",
-				       cur_freq, cpu_policy->cur);
-
-			freqs.cpu = cpu;
-			freqs.old = cpu_policy->cur;
-			freqs.new = cur_freq;
-
-			srcu_notifier_call_chain(
-					&cpufreq_transition_notifier_list,
-					CPUFREQ_RESUMECHANGE, &freqs);
-			adjust_jiffies(CPUFREQ_RESUMECHANGE, &freqs);
-
-			cpu_policy->cur = cur_freq;
-		}
-	}
-
-out:
 	schedule_work(&cpu_policy->update);
+
 fail:
 	cpufreq_cpu_put(cpu_policy);
 	return ret;
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 7fc58af748b..bdea7e2f94b 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -64,21 +64,20 @@ struct cpu_dbs_info_s {
 	unsigned int requested_freq;
 	int cpu;
 	unsigned int enable:1;
+	/*
+	 * percpu mutex that serializes governor limit change with
+	 * do_dbs_timer invocation. We do not want do_dbs_timer to run
+	 * when user is changing the governor or limits.
+	 */
+	struct mutex timer_mutex;
 };
 static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
 
 static unsigned int dbs_enable;	/* number of CPUs using this policy */
 
 /*
- * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug
- * lock and dbs_mutex. cpu_hotplug lock should always be held before
- * dbs_mutex. If any function that can potentially take cpu_hotplug lock
- * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
- * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
- * is recursive for the same process. -Venki
- * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it
- * would deadlock with cancel_delayed_work_sync(), which is needed for proper
- * raceless workqueue teardown.
+ * dbs_mutex protects data in dbs_tuners_ins from concurrent changes on
+ * different CPUs. It protects dbs_enable in governor start/stop.
  */
 static DEFINE_MUTEX(dbs_mutex);
 
@@ -488,18 +487,12 @@ static void do_dbs_timer(struct work_struct *work)
 
 	delay -= jiffies % delay;
 
-	if (lock_policy_rwsem_write(cpu) < 0)
-		return;
-
-	if (!dbs_info->enable) {
-		unlock_policy_rwsem_write(cpu);
-		return;
-	}
+	mutex_lock(&dbs_info->timer_mutex);
 
 	dbs_check_cpu(dbs_info);
 
 	queue_delayed_work_on(cpu, kconservative_wq, &dbs_info->work, delay);
-	unlock_policy_rwsem_write(cpu);
+	mutex_unlock(&dbs_info->timer_mutex);
 }
 
 static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
@@ -535,9 +528,6 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 		if ((!cpu_online(cpu)) || (!policy->cur))
 			return -EINVAL;
 
-		if (this_dbs_info->enable) /* Already enabled */
-			break;
-
 		mutex_lock(&dbs_mutex);
 
 		rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
@@ -561,6 +551,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 		this_dbs_info->down_skip = 0;
 		this_dbs_info->requested_freq = policy->cur;
 
+		mutex_init(&this_dbs_info->timer_mutex);
 		dbs_enable++;
 		/*
 		 * Start the timerschedule work, when this governor
@@ -590,17 +581,19 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 					&dbs_cpufreq_notifier_block,
 					CPUFREQ_TRANSITION_NOTIFIER);
 		}
-		dbs_timer_init(this_dbs_info);
-
 		mutex_unlock(&dbs_mutex);
 
+		dbs_timer_init(this_dbs_info);
+
 		break;
 
 	case CPUFREQ_GOV_STOP:
-		mutex_lock(&dbs_mutex);
 		dbs_timer_exit(this_dbs_info);
+
+		mutex_lock(&dbs_mutex);
 		sysfs_remove_group(&policy->kobj, &dbs_attr_group);
 		dbs_enable--;
+		mutex_destroy(&this_dbs_info->timer_mutex);
 
 		/*
 		 * Stop the timerschedule work, when this governor
@@ -616,7 +609,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 		break;
 
 	case CPUFREQ_GOV_LIMITS:
-		mutex_lock(&dbs_mutex);
+		mutex_lock(&this_dbs_info->timer_mutex);
 		if (policy->max < this_dbs_info->cur_policy->cur)
 			__cpufreq_driver_target(
 					this_dbs_info->cur_policy,
@@ -625,7 +618,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 			__cpufreq_driver_target(
 					this_dbs_info->cur_policy,
 					policy->min, CPUFREQ_RELATION_L);
-		mutex_unlock(&dbs_mutex);
+		mutex_unlock(&this_dbs_info->timer_mutex);
 
 		break;
 	}
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 1911d172935..d6ba14276bb 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -70,23 +70,21 @@ struct cpu_dbs_info_s {
 	unsigned int freq_lo_jiffies;
 	unsigned int freq_hi_jiffies;
 	int cpu;
-	unsigned int enable:1,
-		sample_type:1;
+	unsigned int sample_type:1;
+	/*
+	 * percpu mutex that serializes governor limit change with
+	 * do_dbs_timer invocation. We do not want do_dbs_timer to run
+	 * when user is changing the governor or limits.
+	 */
+	struct mutex timer_mutex;
 };
 static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
 
 static unsigned int dbs_enable;	/* number of CPUs using this policy */
 
 /*
- * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug
- * lock and dbs_mutex. cpu_hotplug lock should always be held before
- * dbs_mutex. If any function that can potentially take cpu_hotplug lock
- * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
- * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
- * is recursive for the same process. -Venki
- * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it
- * would deadlock with cancel_delayed_work_sync(), which is needed for proper
- * raceless workqueue teardown.
+ * dbs_mutex protects data in dbs_tuners_ins from concurrent changes on
+ * different CPUs. It protects dbs_enable in governor start/stop.
  */
 static DEFINE_MUTEX(dbs_mutex);
 
@@ -192,13 +190,18 @@ static unsigned int powersave_bias_target(struct cpufreq_policy *policy,
 	return freq_hi;
 }
 
+static void ondemand_powersave_bias_init_cpu(int cpu)
+{
+	struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu);
+	dbs_info->freq_table = cpufreq_frequency_get_table(cpu);
+	dbs_info->freq_lo = 0;
+}
+
 static void ondemand_powersave_bias_init(void)
 {
 	int i;
 	for_each_online_cpu(i) {
-		struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, i);
-		dbs_info->freq_table = cpufreq_frequency_get_table(i);
-		dbs_info->freq_lo = 0;
+		ondemand_powersave_bias_init_cpu(i);
 	}
 }
 
@@ -240,12 +243,10 @@ static ssize_t store_sampling_rate(struct cpufreq_policy *unused,
 	unsigned int input;
 	int ret;
 	ret = sscanf(buf, "%u", &input);
+	if (ret != 1)
+		return -EINVAL;
 
 	mutex_lock(&dbs_mutex);
-	if (ret != 1) {
-		mutex_unlock(&dbs_mutex);
-		return -EINVAL;
-	}
 	dbs_tuners_ins.sampling_rate = max(input, min_sampling_rate);
 	mutex_unlock(&dbs_mutex);
 
@@ -259,13 +260,12 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused,
 	int ret;
 	ret = sscanf(buf, "%u", &input);
 
-	mutex_lock(&dbs_mutex);
 	if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
 			input < MIN_FREQUENCY_UP_THRESHOLD) {
-		mutex_unlock(&dbs_mutex);
 		return -EINVAL;
 	}
 
+	mutex_lock(&dbs_mutex);
 	dbs_tuners_ins.up_threshold = input;
 	mutex_unlock(&dbs_mutex);
 
@@ -363,9 +363,6 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
 	struct cpufreq_policy *policy;
 	unsigned int j;
 
-	if (!this_dbs_info->enable)
-		return;
-
 	this_dbs_info->freq_lo = 0;
 	policy = this_dbs_info->cur_policy;
 
@@ -493,14 +490,7 @@ static void do_dbs_timer(struct work_struct *work)
 	int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
 
 	delay -= jiffies % delay;
-
-	if (lock_policy_rwsem_write(cpu) < 0)
-		return;
-
-	if (!dbs_info->enable) {
-		unlock_policy_rwsem_write(cpu);
-		return;
-	}
+	mutex_lock(&dbs_info->timer_mutex);
 
 	/* Common NORMAL_SAMPLE setup */
 	dbs_info->sample_type = DBS_NORMAL_SAMPLE;
@@ -517,7 +507,7 @@ static void do_dbs_timer(struct work_struct *work)
 			dbs_info->freq_lo, CPUFREQ_RELATION_H);
 	}
 	queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay);
-	unlock_policy_rwsem_write(cpu);
+	mutex_unlock(&dbs_info->timer_mutex);
 }
 
 static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
@@ -526,8 +516,6 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
 	int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
 	delay -= jiffies % delay;
 
-	dbs_info->enable = 1;
-	ondemand_powersave_bias_init();
 	dbs_info->sample_type = DBS_NORMAL_SAMPLE;
 	INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer);
 	queue_delayed_work_on(dbs_info->cpu, kondemand_wq, &dbs_info->work,
@@ -536,7 +524,6 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
 
 static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
 {
-	dbs_info->enable = 0;
 	cancel_delayed_work_sync(&dbs_info->work);
 }
 
@@ -555,19 +542,15 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 		if ((!cpu_online(cpu)) || (!policy->cur))
 			return -EINVAL;
 
-		if (this_dbs_info->enable) /* Already enabled */
-			break;
-
 		mutex_lock(&dbs_mutex);
-		dbs_enable++;
 
 		rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
 		if (rc) {
-			dbs_enable--;
 			mutex_unlock(&dbs_mutex);
 			return rc;
 		}
 
+		dbs_enable++;
 		for_each_cpu(j, policy->cpus) {
 			struct cpu_dbs_info_s *j_dbs_info;
 			j_dbs_info = &per_cpu(cpu_dbs_info, j);
@@ -581,6 +564,8 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 			}
 		}
 		this_dbs_info->cpu = cpu;
+		ondemand_powersave_bias_init_cpu(cpu);
+		mutex_init(&this_dbs_info->timer_mutex);
 		/*
 		 * Start the timerschedule work, when this governor
 		 * is used for first time
@@ -598,29 +583,31 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 				max(min_sampling_rate,
 				    latency * LATENCY_MULTIPLIER);
 		}
-		dbs_timer_init(this_dbs_info);
-
 		mutex_unlock(&dbs_mutex);
+
+		dbs_timer_init(this_dbs_info);
 		break;
 
 	case CPUFREQ_GOV_STOP:
-		mutex_lock(&dbs_mutex);
 		dbs_timer_exit(this_dbs_info);
+
+		mutex_lock(&dbs_mutex);
 		sysfs_remove_group(&policy->kobj, &dbs_attr_group);
+		mutex_destroy(&this_dbs_info->timer_mutex);
 		dbs_enable--;
 		mutex_unlock(&dbs_mutex);
 
 		break;
 
 	case CPUFREQ_GOV_LIMITS:
-		mutex_lock(&dbs_mutex);
+		mutex_lock(&this_dbs_info->timer_mutex);
 		if (policy->max < this_dbs_info->cur_policy->cur)
 			__cpufreq_driver_target(this_dbs_info->cur_policy,
 				policy->max, CPUFREQ_RELATION_H);
 		else if (policy->min > this_dbs_info->cur_policy->cur)
 			__cpufreq_driver_target(this_dbs_info->cur_policy,
 				policy->min, CPUFREQ_RELATION_L);
-		mutex_unlock(&dbs_mutex);
+		mutex_unlock(&this_dbs_info->timer_mutex);
 		break;
 	}
 	return 0;
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 070357aaedb..81e1020fb51 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -4,7 +4,7 @@
 
 menuconfig DMADEVICES
 	bool "DMA Engine support"
-	depends on !HIGHMEM64G && HAS_DMA
+	depends on HAS_DMA
 	help
 	  DMA engines can do asynchronous data transfers without
 	  involving the host CPU.  Currently, this framework can be
@@ -46,6 +46,14 @@ config DW_DMAC
 	  Support the Synopsys DesignWare AHB DMA controller.  This
 	  can be integrated in chips such as the Atmel AT32ap7000.
 
+config AT_HDMAC
+	tristate "Atmel AHB DMA support"
+	depends on ARCH_AT91SAM9RL
+	select DMA_ENGINE
+	help
+	  Support the Atmel AHB DMA controller.  This can be integrated in
+	  chips such as the Atmel AT91SAM9RL.
+
 config FSL_DMA
 	tristate "Freescale Elo and Elo Plus DMA support"
 	depends on FSL_SOC
@@ -108,7 +116,7 @@ config NET_DMA
 
 config ASYNC_TX_DMA
 	bool "Async_tx: Offload support for the async_tx api"
-	depends on DMA_ENGINE
+	depends on DMA_ENGINE && !HIGHMEM64G
 	help
 	  This allows the async_tx api to take advantage of offload engines for
 	  memcpy, memset, xor, and raid6 p+q operations.  If your platform has
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index a0b6564800c..40e1e008357 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -7,5 +7,6 @@ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
 obj-$(CONFIG_MX3_IPU) += ipu/
 obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
new file mode 100644
index 00000000000..9a1e5fb412e
--- /dev/null
+++ b/drivers/dma/at_hdmac.c
@@ -0,0 +1,1213 @@
+/*
+ * Driver for the Atmel AHB DMA Controller (aka HDMA or DMAC on AT91 systems)
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * This supports the Atmel AHB DMA Controller,
+ *
+ * The driver has currently been tested with the Atmel AT91SAM9RL
+ * and AT91SAM9G45 series.
+ */
+
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "at_hdmac_regs.h"
+
+/*
+ * Glossary
+ * --------
+ *
+ * at_hdmac		: Name of the ATmel AHB DMA Controller
+ * at_dma_ / atdma	: ATmel DMA controller entity related
+ * atc_	/ atchan	: ATmel DMA Channel entity related
+ */
+
+#define	ATC_DEFAULT_CFG		(ATC_FIFOCFG_HALFFIFO)
+#define	ATC_DEFAULT_CTRLA	(0)
+#define	ATC_DEFAULT_CTRLB	(ATC_SIF(0)	\
+				|ATC_DIF(1))
+
+/*
+ * Initial number of descriptors to allocate for each channel. This could
+ * be increased during dma usage.
+ */
+static unsigned int init_nr_desc_per_channel = 64;
+module_param(init_nr_desc_per_channel, uint, 0644);
+MODULE_PARM_DESC(init_nr_desc_per_channel,
+		 "initial descriptors per channel (default: 64)");
+
+
+/* prototypes */
+static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx);
+
+
+/*----------------------------------------------------------------------*/
+
+static struct at_desc *atc_first_active(struct at_dma_chan *atchan)
+{
+	return list_first_entry(&atchan->active_list,
+				struct at_desc, desc_node);
+}
+
+static struct at_desc *atc_first_queued(struct at_dma_chan *atchan)
+{
+	return list_first_entry(&atchan->queue,
+				struct at_desc, desc_node);
+}
+
+/**
+ * atc_alloc_descriptor - allocate and return an initilized descriptor
+ * @chan: the channel to allocate descriptors for
+ * @gfp_flags: GFP allocation flags
+ *
+ * Note: The ack-bit is positioned in the descriptor flag at creation time
+ *       to make initial allocation more convenient. This bit will be cleared
+ *       and control will be given to client at usage time (during
+ *       preparation functions).
+ */
+static struct at_desc *atc_alloc_descriptor(struct dma_chan *chan,
+					    gfp_t gfp_flags)
+{
+	struct at_desc	*desc = NULL;
+	struct at_dma	*atdma = to_at_dma(chan->device);
+	dma_addr_t phys;
+
+	desc = dma_pool_alloc(atdma->dma_desc_pool, gfp_flags, &phys);
+	if (desc) {
+		memset(desc, 0, sizeof(struct at_desc));
+		dma_async_tx_descriptor_init(&desc->txd, chan);
+		/* txd.flags will be overwritten in prep functions */
+		desc->txd.flags = DMA_CTRL_ACK;
+		desc->txd.tx_submit = atc_tx_submit;
+		desc->txd.phys = phys;
+	}
+
+	return desc;
+}
+
+/**
+ * atc_desc_get - get a unsused descriptor from free_list
+ * @atchan: channel we want a new descriptor for
+ */
+static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
+{
+	struct at_desc *desc, *_desc;
+	struct at_desc *ret = NULL;
+	unsigned int i = 0;
+	LIST_HEAD(tmp_list);
+
+	spin_lock_bh(&atchan->lock);
+	list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
+		i++;
+		if (async_tx_test_ack(&desc->txd)) {
+			list_del(&desc->desc_node);
+			ret = desc;
+			break;
+		}
+		dev_dbg(chan2dev(&atchan->chan_common),
+				"desc %p not ACKed\n", desc);
+	}
+	spin_unlock_bh(&atchan->lock);
+	dev_vdbg(chan2dev(&atchan->chan_common),
+		"scanned %u descriptors on freelist\n", i);
+
+	/* no more descriptor available in initial pool: create one more */
+	if (!ret) {
+		ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC);
+		if (ret) {
+			spin_lock_bh(&atchan->lock);
+			atchan->descs_allocated++;
+			spin_unlock_bh(&atchan->lock);
+		} else {
+			dev_err(chan2dev(&atchan->chan_common),
+					"not enough descriptors available\n");
+		}
+	}
+
+	return ret;
+}
+
+/**
+ * atc_desc_put - move a descriptor, including any children, to the free list
+ * @atchan: channel we work on
+ * @desc: descriptor, at the head of a chain, to move to free list
+ */
+static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+	if (desc) {
+		struct at_desc *child;
+
+		spin_lock_bh(&atchan->lock);
+		list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+			dev_vdbg(chan2dev(&atchan->chan_common),
+					"moving child desc %p to freelist\n",
+					child);
+		list_splice_init(&desc->txd.tx_list, &atchan->free_list);
+		dev_vdbg(chan2dev(&atchan->chan_common),
+			 "moving desc %p to freelist\n", desc);
+		list_add(&desc->desc_node, &atchan->free_list);
+		spin_unlock_bh(&atchan->lock);
+	}
+}
+
+/**
+ * atc_assign_cookie - compute and assign new cookie
+ * @atchan: channel we work on
+ * @desc: descriptor to asign cookie for
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static dma_cookie_t
+atc_assign_cookie(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+	dma_cookie_t cookie = atchan->chan_common.cookie;
+
+	if (++cookie < 0)
+		cookie = 1;
+
+	atchan->chan_common.cookie = cookie;
+	desc->txd.cookie = cookie;
+
+	return cookie;
+}
+
+/**
+ * atc_dostart - starts the DMA engine for real
+ * @atchan: the channel we want to start
+ * @first: first descriptor in the list we want to begin with
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_dostart(struct at_dma_chan *atchan, struct at_desc *first)
+{
+	struct at_dma	*atdma = to_at_dma(atchan->chan_common.device);
+
+	/* ASSERT:  channel is idle */
+	if (atc_chan_is_enabled(atchan)) {
+		dev_err(chan2dev(&atchan->chan_common),
+			"BUG: Attempted to start non-idle channel\n");
+		dev_err(chan2dev(&atchan->chan_common),
+			"  channel: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
+			channel_readl(atchan, SADDR),
+			channel_readl(atchan, DADDR),
+			channel_readl(atchan, CTRLA),
+			channel_readl(atchan, CTRLB),
+			channel_readl(atchan, DSCR));
+
+		/* The tasklet will hopefully advance the queue... */
+		return;
+	}
+
+	vdbg_dump_regs(atchan);
+
+	/* clear any pending interrupt */
+	while (dma_readl(atdma, EBCISR))
+		cpu_relax();
+
+	channel_writel(atchan, SADDR, 0);
+	channel_writel(atchan, DADDR, 0);
+	channel_writel(atchan, CTRLA, 0);
+	channel_writel(atchan, CTRLB, 0);
+	channel_writel(atchan, DSCR, first->txd.phys);
+	dma_writel(atdma, CHER, atchan->mask);
+
+	vdbg_dump_regs(atchan);
+}
+
+/**
+ * atc_chain_complete - finish work for one transaction chain
+ * @atchan: channel we work on
+ * @desc: descriptor at the head of the chain we want do complete
+ *
+ * Called with atchan->lock held and bh disabled */
+static void
+atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+	dma_async_tx_callback		callback;
+	void				*param;
+	struct dma_async_tx_descriptor	*txd = &desc->txd;
+
+	dev_vdbg(chan2dev(&atchan->chan_common),
+		"descriptor %u complete\n", txd->cookie);
+
+	atchan->completed_cookie = txd->cookie;
+	callback = txd->callback;
+	param = txd->callback_param;
+
+	/* move children to free_list */
+	list_splice_init(&txd->tx_list, &atchan->free_list);
+	/* move myself to free_list */
+	list_move(&desc->desc_node, &atchan->free_list);
+
+	/* unmap dma addresses */
+	if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+		if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+			dma_unmap_single(chan2parent(&atchan->chan_common),
+					desc->lli.daddr,
+					desc->len, DMA_FROM_DEVICE);
+		else
+			dma_unmap_page(chan2parent(&atchan->chan_common),
+					desc->lli.daddr,
+					desc->len, DMA_FROM_DEVICE);
+	}
+	if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+		if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+			dma_unmap_single(chan2parent(&atchan->chan_common),
+					desc->lli.saddr,
+					desc->len, DMA_TO_DEVICE);
+		else
+			dma_unmap_page(chan2parent(&atchan->chan_common),
+					desc->lli.saddr,
+					desc->len, DMA_TO_DEVICE);
+	}
+
+	/*
+	 * The API requires that no submissions are done from a
+	 * callback, so we don't need to drop the lock here
+	 */
+	if (callback)
+		callback(param);
+
+	dma_run_dependencies(txd);
+}
+
+/**
+ * atc_complete_all - finish work for all transactions
+ * @atchan: channel to complete transactions for
+ *
+ * Eventually submit queued descriptors if any
+ *
+ * Assume channel is idle while calling this function
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_complete_all(struct at_dma_chan *atchan)
+{
+	struct at_desc *desc, *_desc;
+	LIST_HEAD(list);
+
+	dev_vdbg(chan2dev(&atchan->chan_common), "complete all\n");
+
+	BUG_ON(atc_chan_is_enabled(atchan));
+
+	/*
+	 * Submit queued descriptors ASAP, i.e. before we go through
+	 * the completed ones.
+	 */
+	if (!list_empty(&atchan->queue))
+		atc_dostart(atchan, atc_first_queued(atchan));
+	/* empty active_list now it is completed */
+	list_splice_init(&atchan->active_list, &list);
+	/* empty queue list by moving descriptors (if any) to active_list */
+	list_splice_init(&atchan->queue, &atchan->active_list);
+
+	list_for_each_entry_safe(desc, _desc, &list, desc_node)
+		atc_chain_complete(atchan, desc);
+}
+
+/**
+ * atc_cleanup_descriptors - cleanup up finished descriptors in active_list
+ * @atchan: channel to be cleaned up
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_cleanup_descriptors(struct at_dma_chan *atchan)
+{
+	struct at_desc	*desc, *_desc;
+	struct at_desc	*child;
+
+	dev_vdbg(chan2dev(&atchan->chan_common), "cleanup descriptors\n");
+
+	list_for_each_entry_safe(desc, _desc, &atchan->active_list, desc_node) {
+		if (!(desc->lli.ctrla & ATC_DONE))
+			/* This one is currently in progress */
+			return;
+
+		list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+			if (!(child->lli.ctrla & ATC_DONE))
+				/* Currently in progress */
+				return;
+
+		/*
+		 * No descriptors so far seem to be in progress, i.e.
+		 * this chain must be done.
+		 */
+		atc_chain_complete(atchan, desc);
+	}
+}
+
+/**
+ * atc_advance_work - at the end of a transaction, move forward
+ * @atchan: channel where the transaction ended
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_advance_work(struct at_dma_chan *atchan)
+{
+	dev_vdbg(chan2dev(&atchan->chan_common), "advance_work\n");
+
+	if (list_empty(&atchan->active_list) ||
+	    list_is_singular(&atchan->active_list)) {
+		atc_complete_all(atchan);
+	} else {
+		atc_chain_complete(atchan, atc_first_active(atchan));
+		/* advance work */
+		atc_dostart(atchan, atc_first_active(atchan));
+	}
+}
+
+
+/**
+ * atc_handle_error - handle errors reported by DMA controller
+ * @atchan: channel where error occurs
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_handle_error(struct at_dma_chan *atchan)
+{
+	struct at_desc *bad_desc;
+	struct at_desc *child;
+
+	/*
+	 * The descriptor currently at the head of the active list is
+	 * broked. Since we don't have any way to report errors, we'll
+	 * just have to scream loudly and try to carry on.
+	 */
+	bad_desc = atc_first_active(atchan);
+	list_del_init(&bad_desc->desc_node);
+
+	/* As we are stopped, take advantage to push queued descriptors
+	 * in active_list */
+	list_splice_init(&atchan->queue, atchan->active_list.prev);
+
+	/* Try to restart the controller */
+	if (!list_empty(&atchan->active_list))
+		atc_dostart(atchan, atc_first_active(atchan));
+
+	/*
+	 * KERN_CRITICAL may seem harsh, but since this only happens
+	 * when someone submits a bad physical address in a
+	 * descriptor, we should consider ourselves lucky that the
+	 * controller flagged an error instead of scribbling over
+	 * random memory locations.
+	 */
+	dev_crit(chan2dev(&atchan->chan_common),
+			"Bad descriptor submitted for DMA!\n");
+	dev_crit(chan2dev(&atchan->chan_common),
+			"  cookie: %d\n", bad_desc->txd.cookie);
+	atc_dump_lli(atchan, &bad_desc->lli);
+	list_for_each_entry(child, &bad_desc->txd.tx_list, desc_node)
+		atc_dump_lli(atchan, &child->lli);
+
+	/* Pretend the descriptor completed successfully */
+	atc_chain_complete(atchan, bad_desc);
+}
+
+
+/*--  IRQ & Tasklet  ---------------------------------------------------*/
+
+static void atc_tasklet(unsigned long data)
+{
+	struct at_dma_chan *atchan = (struct at_dma_chan *)data;
+
+	/* Channel cannot be enabled here */
+	if (atc_chan_is_enabled(atchan)) {
+		dev_err(chan2dev(&atchan->chan_common),
+			"BUG: channel enabled in tasklet\n");
+		return;
+	}
+
+	spin_lock(&atchan->lock);
+	if (test_and_clear_bit(0, &atchan->error_status))
+		atc_handle_error(atchan);
+	else
+		atc_advance_work(atchan);
+
+	spin_unlock(&atchan->lock);
+}
+
+static irqreturn_t at_dma_interrupt(int irq, void *dev_id)
+{
+	struct at_dma		*atdma = (struct at_dma *)dev_id;
+	struct at_dma_chan	*atchan;
+	int			i;
+	u32			status, pending, imr;
+	int			ret = IRQ_NONE;
+
+	do {
+		imr = dma_readl(atdma, EBCIMR);
+		status = dma_readl(atdma, EBCISR);
+		pending = status & imr;
+
+		if (!pending)
+			break;
+
+		dev_vdbg(atdma->dma_common.dev,
+			"interrupt: status = 0x%08x, 0x%08x, 0x%08x\n",
+			 status, imr, pending);
+
+		for (i = 0; i < atdma->dma_common.chancnt; i++) {
+			atchan = &atdma->chan[i];
+			if (pending & (AT_DMA_CBTC(i) | AT_DMA_ERR(i))) {
+				if (pending & AT_DMA_ERR(i)) {
+					/* Disable channel on AHB error */
+					dma_writel(atdma, CHDR, atchan->mask);
+					/* Give information to tasklet */
+					set_bit(0, &atchan->error_status);
+				}
+				tasklet_schedule(&atchan->tasklet);
+				ret = IRQ_HANDLED;
+			}
+		}
+
+	} while (pending);
+
+	return ret;
+}
+
+
+/*--  DMA Engine API  --------------------------------------------------*/
+
+/**
+ * atc_tx_submit - set the prepared descriptor(s) to be executed by the engine
+ * @desc: descriptor at the head of the transaction chain
+ *
+ * Queue chain if DMA engine is working already
+ *
+ * Cookie increment and adding to active_list or queue must be atomic
+ */
+static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	struct at_desc		*desc = txd_to_at_desc(tx);
+	struct at_dma_chan	*atchan = to_at_dma_chan(tx->chan);
+	dma_cookie_t		cookie;
+
+	spin_lock_bh(&atchan->lock);
+	cookie = atc_assign_cookie(atchan, desc);
+
+	if (list_empty(&atchan->active_list)) {
+		dev_vdbg(chan2dev(tx->chan), "tx_submit: started %u\n",
+				desc->txd.cookie);
+		atc_dostart(atchan, desc);
+		list_add_tail(&desc->desc_node, &atchan->active_list);
+	} else {
+		dev_vdbg(chan2dev(tx->chan), "tx_submit: queued %u\n",
+				desc->txd.cookie);
+		list_add_tail(&desc->desc_node, &atchan->queue);
+	}
+
+	spin_unlock_bh(&atchan->lock);
+
+	return cookie;
+}
+
+/**
+ * atc_prep_dma_memcpy - prepare a memcpy operation
+ * @chan: the channel to prepare operation on
+ * @dest: operation virtual destination address
+ * @src: operation virtual source address
+ * @len: operation length
+ * @flags: tx descriptor status flags
+ */
+static struct dma_async_tx_descriptor *
+atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+		size_t len, unsigned long flags)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	struct at_desc		*desc = NULL;
+	struct at_desc		*first = NULL;
+	struct at_desc		*prev = NULL;
+	size_t			xfer_count;
+	size_t			offset;
+	unsigned int		src_width;
+	unsigned int		dst_width;
+	u32			ctrla;
+	u32			ctrlb;
+
+	dev_vdbg(chan2dev(chan), "prep_dma_memcpy: d0x%x s0x%x l0x%zx f0x%lx\n",
+			dest, src, len, flags);
+
+	if (unlikely(!len)) {
+		dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
+		return NULL;
+	}
+
+	ctrla =   ATC_DEFAULT_CTRLA;
+	ctrlb =   ATC_DEFAULT_CTRLB
+		| ATC_SRC_ADDR_MODE_INCR
+		| ATC_DST_ADDR_MODE_INCR
+		| ATC_FC_MEM2MEM;
+
+	/*
+	 * We can be a lot more clever here, but this should take care
+	 * of the most common optimization.
+	 */
+	if (!((src | dest  | len) & 3)) {
+		ctrla |= ATC_SRC_WIDTH_WORD | ATC_DST_WIDTH_WORD;
+		src_width = dst_width = 2;
+	} else if (!((src | dest | len) & 1)) {
+		ctrla |= ATC_SRC_WIDTH_HALFWORD | ATC_DST_WIDTH_HALFWORD;
+		src_width = dst_width = 1;
+	} else {
+		ctrla |= ATC_SRC_WIDTH_BYTE | ATC_DST_WIDTH_BYTE;
+		src_width = dst_width = 0;
+	}
+
+	for (offset = 0; offset < len; offset += xfer_count << src_width) {
+		xfer_count = min_t(size_t, (len - offset) >> src_width,
+				ATC_BTSIZE_MAX);
+
+		desc = atc_desc_get(atchan);
+		if (!desc)
+			goto err_desc_get;
+
+		desc->lli.saddr = src + offset;
+		desc->lli.daddr = dest + offset;
+		desc->lli.ctrla = ctrla | xfer_count;
+		desc->lli.ctrlb = ctrlb;
+
+		desc->txd.cookie = 0;
+		async_tx_ack(&desc->txd);
+
+		if (!first) {
+			first = desc;
+		} else {
+			/* inform the HW lli about chaining */
+			prev->lli.dscr = desc->txd.phys;
+			/* insert the link descriptor to the LD ring */
+			list_add_tail(&desc->desc_node,
+					&first->txd.tx_list);
+		}
+		prev = desc;
+	}
+
+	/* First descriptor of the chain embedds additional information */
+	first->txd.cookie = -EBUSY;
+	first->len = len;
+
+	/* set end-of-link to the last link descriptor of list*/
+	set_desc_eol(desc);
+
+	desc->txd.flags = flags; /* client is in control of this ack */
+
+	return &first->txd;
+
+err_desc_get:
+	atc_desc_put(atchan, first);
+	return NULL;
+}
+
+
+/**
+ * atc_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
+ * @chan: DMA channel
+ * @sgl: scatterlist to transfer to/from
+ * @sg_len: number of entries in @scatterlist
+ * @direction: DMA direction
+ * @flags: tx descriptor status flags
+ */
+static struct dma_async_tx_descriptor *
+atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_data_direction direction,
+		unsigned long flags)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	struct at_dma_slave	*atslave = chan->private;
+	struct at_desc		*first = NULL;
+	struct at_desc		*prev = NULL;
+	u32			ctrla;
+	u32			ctrlb;
+	dma_addr_t		reg;
+	unsigned int		reg_width;
+	unsigned int		mem_width;
+	unsigned int		i;
+	struct scatterlist	*sg;
+	size_t			total_len = 0;
+
+	dev_vdbg(chan2dev(chan), "prep_slave_sg: %s f0x%lx\n",
+			direction == DMA_TO_DEVICE ? "TO DEVICE" : "FROM DEVICE",
+			flags);
+
+	if (unlikely(!atslave || !sg_len)) {
+		dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
+		return NULL;
+	}
+
+	reg_width = atslave->reg_width;
+
+	sg_len = dma_map_sg(chan2parent(chan), sgl, sg_len, direction);
+
+	ctrla = ATC_DEFAULT_CTRLA | atslave->ctrla;
+	ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN;
+
+	switch (direction) {
+	case DMA_TO_DEVICE:
+		ctrla |=  ATC_DST_WIDTH(reg_width);
+		ctrlb |=  ATC_DST_ADDR_MODE_FIXED
+			| ATC_SRC_ADDR_MODE_INCR
+			| ATC_FC_MEM2PER;
+		reg = atslave->tx_reg;
+		for_each_sg(sgl, sg, sg_len, i) {
+			struct at_desc	*desc;
+			u32		len;
+			u32		mem;
+
+			desc = atc_desc_get(atchan);
+			if (!desc)
+				goto err_desc_get;
+
+			mem = sg_phys(sg);
+			len = sg_dma_len(sg);
+			mem_width = 2;
+			if (unlikely(mem & 3 || len & 3))
+				mem_width = 0;
+
+			desc->lli.saddr = mem;
+			desc->lli.daddr = reg;
+			desc->lli.ctrla = ctrla
+					| ATC_SRC_WIDTH(mem_width)
+					| len >> mem_width;
+			desc->lli.ctrlb = ctrlb;
+
+			if (!first) {
+				first = desc;
+			} else {
+				/* inform the HW lli about chaining */
+				prev->lli.dscr = desc->txd.phys;
+				/* insert the link descriptor to the LD ring */
+				list_add_tail(&desc->desc_node,
+						&first->txd.tx_list);
+			}
+			prev = desc;
+			total_len += len;
+		}
+		break;
+	case DMA_FROM_DEVICE:
+		ctrla |=  ATC_SRC_WIDTH(reg_width);
+		ctrlb |=  ATC_DST_ADDR_MODE_INCR
+			| ATC_SRC_ADDR_MODE_FIXED
+			| ATC_FC_PER2MEM;
+
+		reg = atslave->rx_reg;
+		for_each_sg(sgl, sg, sg_len, i) {
+			struct at_desc	*desc;
+			u32		len;
+			u32		mem;
+
+			desc = atc_desc_get(atchan);
+			if (!desc)
+				goto err_desc_get;
+
+			mem = sg_phys(sg);
+			len = sg_dma_len(sg);
+			mem_width = 2;
+			if (unlikely(mem & 3 || len & 3))
+				mem_width = 0;
+
+			desc->lli.saddr = reg;
+			desc->lli.daddr = mem;
+			desc->lli.ctrla = ctrla
+					| ATC_DST_WIDTH(mem_width)
+					| len >> mem_width;
+			desc->lli.ctrlb = ctrlb;
+
+			if (!first) {
+				first = desc;
+			} else {
+				/* inform the HW lli about chaining */
+				prev->lli.dscr = desc->txd.phys;
+				/* insert the link descriptor to the LD ring */
+				list_add_tail(&desc->desc_node,
+						&first->txd.tx_list);
+			}
+			prev = desc;
+			total_len += len;
+		}
+		break;
+	default:
+		return NULL;
+	}
+
+	/* set end-of-link to the last link descriptor of list*/
+	set_desc_eol(prev);
+
+	/* First descriptor of the chain embedds additional information */
+	first->txd.cookie = -EBUSY;
+	first->len = total_len;
+
+	/* last link descriptor of list is responsible of flags */
+	prev->txd.flags = flags; /* client is in control of this ack */
+
+	return &first->txd;
+
+err_desc_get:
+	dev_err(chan2dev(chan), "not enough descriptors available\n");
+	atc_desc_put(atchan, first);
+	return NULL;
+}
+
+static void atc_terminate_all(struct dma_chan *chan)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	struct at_dma		*atdma = to_at_dma(chan->device);
+	struct at_desc		*desc, *_desc;
+	LIST_HEAD(list);
+
+	/*
+	 * This is only called when something went wrong elsewhere, so
+	 * we don't really care about the data. Just disable the
+	 * channel. We still have to poll the channel enable bit due
+	 * to AHB/HSB limitations.
+	 */
+	spin_lock_bh(&atchan->lock);
+
+	dma_writel(atdma, CHDR, atchan->mask);
+
+	/* confirm that this channel is disabled */
+	while (dma_readl(atdma, CHSR) & atchan->mask)
+		cpu_relax();
+
+	/* active_list entries will end up before queued entries */
+	list_splice_init(&atchan->queue, &list);
+	list_splice_init(&atchan->active_list, &list);
+
+	spin_unlock_bh(&atchan->lock);
+
+	/* Flush all pending and queued descriptors */
+	list_for_each_entry_safe(desc, _desc, &list, desc_node)
+		atc_chain_complete(atchan, desc);
+}
+
+/**
+ * atc_is_tx_complete - poll for transaction completion
+ * @chan: DMA channel
+ * @cookie: transaction identifier to check status of
+ * @done: if not %NULL, updated with last completed transaction
+ * @used: if not %NULL, updated with last used transaction
+ *
+ * If @done and @used are passed in, upon return they reflect the driver
+ * internal state and can be used with dma_async_is_complete() to check
+ * the status of multiple cookies without re-checking hardware state.
+ */
+static enum dma_status
+atc_is_tx_complete(struct dma_chan *chan,
+		dma_cookie_t cookie,
+		dma_cookie_t *done, dma_cookie_t *used)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	dma_cookie_t		last_used;
+	dma_cookie_t		last_complete;
+	enum dma_status		ret;
+
+	dev_vdbg(chan2dev(chan), "is_tx_complete: %d (d%d, u%d)\n",
+			cookie, done ? *done : 0, used ? *used : 0);
+
+	spin_lock_bh(atchan->lock);
+
+	last_complete = atchan->completed_cookie;
+	last_used = chan->cookie;
+
+	ret = dma_async_is_complete(cookie, last_complete, last_used);
+	if (ret != DMA_SUCCESS) {
+		atc_cleanup_descriptors(atchan);
+
+		last_complete = atchan->completed_cookie;
+		last_used = chan->cookie;
+
+		ret = dma_async_is_complete(cookie, last_complete, last_used);
+	}
+
+	spin_unlock_bh(atchan->lock);
+
+	if (done)
+		*done = last_complete;
+	if (used)
+		*used = last_used;
+
+	return ret;
+}
+
+/**
+ * atc_issue_pending - try to finish work
+ * @chan: target DMA channel
+ */
+static void atc_issue_pending(struct dma_chan *chan)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+
+	dev_vdbg(chan2dev(chan), "issue_pending\n");
+
+	if (!atc_chan_is_enabled(atchan)) {
+		spin_lock_bh(&atchan->lock);
+		atc_advance_work(atchan);
+		spin_unlock_bh(&atchan->lock);
+	}
+}
+
+/**
+ * atc_alloc_chan_resources - allocate resources for DMA channel
+ * @chan: allocate descriptor resources for this channel
+ * @client: current client requesting the channel be ready for requests
+ *
+ * return - the number of allocated descriptors
+ */
+static int atc_alloc_chan_resources(struct dma_chan *chan)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	struct at_dma		*atdma = to_at_dma(chan->device);
+	struct at_desc		*desc;
+	struct at_dma_slave	*atslave;
+	int			i;
+	u32			cfg;
+	LIST_HEAD(tmp_list);
+
+	dev_vdbg(chan2dev(chan), "alloc_chan_resources\n");
+
+	/* ASSERT:  channel is idle */
+	if (atc_chan_is_enabled(atchan)) {
+		dev_dbg(chan2dev(chan), "DMA channel not idle ?\n");
+		return -EIO;
+	}
+
+	cfg = ATC_DEFAULT_CFG;
+
+	atslave = chan->private;
+	if (atslave) {
+		/*
+		 * We need controller-specific data to set up slave
+		 * transfers.
+		 */
+		BUG_ON(!atslave->dma_dev || atslave->dma_dev != atdma->dma_common.dev);
+
+		/* if cfg configuration specified take it instad of default */
+		if (atslave->cfg)
+			cfg = atslave->cfg;
+	}
+
+	/* have we already been set up?
+	 * reconfigure channel but no need to reallocate descriptors */
+	if (!list_empty(&atchan->free_list))
+		return atchan->descs_allocated;
+
+	/* Allocate initial pool of descriptors */
+	for (i = 0; i < init_nr_desc_per_channel; i++) {
+		desc = atc_alloc_descriptor(chan, GFP_KERNEL);
+		if (!desc) {
+			dev_err(atdma->dma_common.dev,
+				"Only %d initial descriptors\n", i);
+			break;
+		}
+		list_add_tail(&desc->desc_node, &tmp_list);
+	}
+
+	spin_lock_bh(&atchan->lock);
+	atchan->descs_allocated = i;
+	list_splice(&tmp_list, &atchan->free_list);
+	atchan->completed_cookie = chan->cookie = 1;
+	spin_unlock_bh(&atchan->lock);
+
+	/* channel parameters */
+	channel_writel(atchan, CFG, cfg);
+
+	dev_dbg(chan2dev(chan),
+		"alloc_chan_resources: allocated %d descriptors\n",
+		atchan->descs_allocated);
+
+	return atchan->descs_allocated;
+}
+
+/**
+ * atc_free_chan_resources - free all channel resources
+ * @chan: DMA channel
+ */
+static void atc_free_chan_resources(struct dma_chan *chan)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	struct at_dma		*atdma = to_at_dma(chan->device);
+	struct at_desc		*desc, *_desc;
+	LIST_HEAD(list);
+
+	dev_dbg(chan2dev(chan), "free_chan_resources: (descs allocated=%u)\n",
+		atchan->descs_allocated);
+
+	/* ASSERT:  channel is idle */
+	BUG_ON(!list_empty(&atchan->active_list));
+	BUG_ON(!list_empty(&atchan->queue));
+	BUG_ON(atc_chan_is_enabled(atchan));
+
+	list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
+		dev_vdbg(chan2dev(chan), "  freeing descriptor %p\n", desc);
+		list_del(&desc->desc_node);
+		/* free link descriptor */
+		dma_pool_free(atdma->dma_desc_pool, desc, desc->txd.phys);
+	}
+	list_splice_init(&atchan->free_list, &list);
+	atchan->descs_allocated = 0;
+
+	dev_vdbg(chan2dev(chan), "free_chan_resources: done\n");
+}
+
+
+/*--  Module Management  -----------------------------------------------*/
+
+/**
+ * at_dma_off - disable DMA controller
+ * @atdma: the Atmel HDAMC device
+ */
+static void at_dma_off(struct at_dma *atdma)
+{
+	dma_writel(atdma, EN, 0);
+
+	/* disable all interrupts */
+	dma_writel(atdma, EBCIDR, -1L);
+
+	/* confirm that all channels are disabled */
+	while (dma_readl(atdma, CHSR) & atdma->all_chan_mask)
+		cpu_relax();
+}
+
+static int __init at_dma_probe(struct platform_device *pdev)
+{
+	struct at_dma_platform_data *pdata;
+	struct resource		*io;
+	struct at_dma		*atdma;
+	size_t			size;
+	int			irq;
+	int			err;
+	int			i;
+
+	/* get DMA Controller parameters from platform */
+	pdata = pdev->dev.platform_data;
+	if (!pdata || pdata->nr_channels > AT_DMA_MAX_NR_CHANNELS)
+		return -EINVAL;
+
+	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!io)
+		return -EINVAL;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	size = sizeof(struct at_dma);
+	size += pdata->nr_channels * sizeof(struct at_dma_chan);
+	atdma = kzalloc(size, GFP_KERNEL);
+	if (!atdma)
+		return -ENOMEM;
+
+	/* discover transaction capabilites from the platform data */
+	atdma->dma_common.cap_mask = pdata->cap_mask;
+	atdma->all_chan_mask = (1 << pdata->nr_channels) - 1;
+
+	size = io->end - io->start + 1;
+	if (!request_mem_region(io->start, size, pdev->dev.driver->name)) {
+		err = -EBUSY;
+		goto err_kfree;
+	}
+
+	atdma->regs = ioremap(io->start, size);
+	if (!atdma->regs) {
+		err = -ENOMEM;
+		goto err_release_r;
+	}
+
+	atdma->clk = clk_get(&pdev->dev, "dma_clk");
+	if (IS_ERR(atdma->clk)) {
+		err = PTR_ERR(atdma->clk);
+		goto err_clk;
+	}
+	clk_enable(atdma->clk);
+
+	/* force dma off, just in case */
+	at_dma_off(atdma);
+
+	err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma);
+	if (err)
+		goto err_irq;
+
+	platform_set_drvdata(pdev, atdma);
+
+	/* create a pool of consistent memory blocks for hardware descriptors */
+	atdma->dma_desc_pool = dma_pool_create("at_hdmac_desc_pool",
+			&pdev->dev, sizeof(struct at_desc),
+			4 /* word alignment */, 0);
+	if (!atdma->dma_desc_pool) {
+		dev_err(&pdev->dev, "No memory for descriptors dma pool\n");
+		err = -ENOMEM;
+		goto err_pool_create;
+	}
+
+	/* clear any pending interrupt */
+	while (dma_readl(atdma, EBCISR))
+		cpu_relax();
+
+	/* initialize channels related values */
+	INIT_LIST_HEAD(&atdma->dma_common.channels);
+	for (i = 0; i < pdata->nr_channels; i++, atdma->dma_common.chancnt++) {
+		struct at_dma_chan	*atchan = &atdma->chan[i];
+
+		atchan->chan_common.device = &atdma->dma_common;
+		atchan->chan_common.cookie = atchan->completed_cookie = 1;
+		atchan->chan_common.chan_id = i;
+		list_add_tail(&atchan->chan_common.device_node,
+				&atdma->dma_common.channels);
+
+		atchan->ch_regs = atdma->regs + ch_regs(i);
+		spin_lock_init(&atchan->lock);
+		atchan->mask = 1 << i;
+
+		INIT_LIST_HEAD(&atchan->active_list);
+		INIT_LIST_HEAD(&atchan->queue);
+		INIT_LIST_HEAD(&atchan->free_list);
+
+		tasklet_init(&atchan->tasklet, atc_tasklet,
+				(unsigned long)atchan);
+		atc_enable_irq(atchan);
+	}
+
+	/* set base routines */
+	atdma->dma_common.device_alloc_chan_resources = atc_alloc_chan_resources;
+	atdma->dma_common.device_free_chan_resources = atc_free_chan_resources;
+	atdma->dma_common.device_is_tx_complete = atc_is_tx_complete;
+	atdma->dma_common.device_issue_pending = atc_issue_pending;
+	atdma->dma_common.dev = &pdev->dev;
+
+	/* set prep routines based on capability */
+	if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask))
+		atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy;
+
+	if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) {
+		atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg;
+		atdma->dma_common.device_terminate_all = atc_terminate_all;
+	}
+
+	dma_writel(atdma, EN, AT_DMA_ENABLE);
+
+	dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s), %d channels\n",
+	  dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask) ? "cpy " : "",
+	  dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)  ? "slave " : "",
+	  atdma->dma_common.chancnt);
+
+	dma_async_device_register(&atdma->dma_common);
+
+	return 0;
+
+err_pool_create:
+	platform_set_drvdata(pdev, NULL);
+	free_irq(platform_get_irq(pdev, 0), atdma);
+err_irq:
+	clk_disable(atdma->clk);
+	clk_put(atdma->clk);
+err_clk:
+	iounmap(atdma->regs);
+	atdma->regs = NULL;
+err_release_r:
+	release_mem_region(io->start, size);
+err_kfree:
+	kfree(atdma);
+	return err;
+}
+
+static int __exit at_dma_remove(struct platform_device *pdev)
+{
+	struct at_dma		*atdma = platform_get_drvdata(pdev);
+	struct dma_chan		*chan, *_chan;
+	struct resource		*io;
+
+	at_dma_off(atdma);
+	dma_async_device_unregister(&atdma->dma_common);
+
+	dma_pool_destroy(atdma->dma_desc_pool);
+	platform_set_drvdata(pdev, NULL);
+	free_irq(platform_get_irq(pdev, 0), atdma);
+
+	list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+			device_node) {
+		struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+
+		/* Disable interrupts */
+		atc_disable_irq(atchan);
+		tasklet_disable(&atchan->tasklet);
+
+		tasklet_kill(&atchan->tasklet);
+		list_del(&chan->device_node);
+	}
+
+	clk_disable(atdma->clk);
+	clk_put(atdma->clk);
+
+	iounmap(atdma->regs);
+	atdma->regs = NULL;
+
+	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(io->start, io->end - io->start + 1);
+
+	kfree(atdma);
+
+	return 0;
+}
+
+static void at_dma_shutdown(struct platform_device *pdev)
+{
+	struct at_dma	*atdma = platform_get_drvdata(pdev);
+
+	at_dma_off(platform_get_drvdata(pdev));
+	clk_disable(atdma->clk);
+}
+
+static int at_dma_suspend_late(struct platform_device *pdev, pm_message_t mesg)
+{
+	struct at_dma	*atdma = platform_get_drvdata(pdev);
+
+	at_dma_off(platform_get_drvdata(pdev));
+	clk_disable(atdma->clk);
+	return 0;
+}
+
+static int at_dma_resume_early(struct platform_device *pdev)
+{
+	struct at_dma	*atdma = platform_get_drvdata(pdev);
+
+	clk_enable(atdma->clk);
+	dma_writel(atdma, EN, AT_DMA_ENABLE);
+	return 0;
+
+}
+
+static struct platform_driver at_dma_driver = {
+	.remove		= __exit_p(at_dma_remove),
+	.shutdown	= at_dma_shutdown,
+	.suspend_late	= at_dma_suspend_late,
+	.resume_early	= at_dma_resume_early,
+	.driver = {
+		.name	= "at_hdmac",
+	},
+};
+
+static int __init at_dma_init(void)
+{
+	return platform_driver_probe(&at_dma_driver, at_dma_probe);
+}
+module_init(at_dma_init);
+
+static void __exit at_dma_exit(void)
+{
+	platform_driver_unregister(&at_dma_driver);
+}
+module_exit(at_dma_exit);
+
+MODULE_DESCRIPTION("Atmel AHB DMA Controller driver");
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at_hdmac");
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
new file mode 100644
index 00000000000..4c972afc49e
--- /dev/null
+++ b/drivers/dma/at_hdmac_regs.h
@@ -0,0 +1,353 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_REGS_H
+#define	AT_HDMAC_REGS_H
+
+#include <mach/at_hdmac.h>
+
+#define	AT_DMA_MAX_NR_CHANNELS	8
+
+
+#define	AT_DMA_GCFG	0x00	/* Global Configuration Register */
+#define		AT_DMA_IF_BIGEND(i)	(0x1 << (i))	/* AHB-Lite Interface i in Big-endian mode */
+#define		AT_DMA_ARB_CFG	(0x1 << 4)	/* Arbiter mode. */
+#define			AT_DMA_ARB_CFG_FIXED		(0x0 << 4)
+#define			AT_DMA_ARB_CFG_ROUND_ROBIN	(0x1 << 4)
+
+#define	AT_DMA_EN	0x04	/* Controller Enable Register */
+#define		AT_DMA_ENABLE	(0x1 << 0)
+
+#define	AT_DMA_SREQ	0x08	/* Software Single Request Register */
+#define		AT_DMA_SSREQ(x)	(0x1 << ((x) << 1))		/* Request a source single transfer on channel x */
+#define		AT_DMA_DSREQ(x)	(0x1 << (1 + ((x) << 1)))	/* Request a destination single transfer on channel x */
+
+#define	AT_DMA_CREQ	0x0C	/* Software Chunk Transfer Request Register */
+#define		AT_DMA_SCREQ(x)	(0x1 << ((x) << 1))		/* Request a source chunk transfer on channel x */
+#define		AT_DMA_DCREQ(x)	(0x1 << (1 + ((x) << 1)))	/* Request a destination chunk transfer on channel x */
+
+#define	AT_DMA_LAST	0x10	/* Software Last Transfer Flag Register */
+#define		AT_DMA_SLAST(x)	(0x1 << ((x) << 1))		/* This src rq is last tx of buffer on channel x */
+#define		AT_DMA_DLAST(x)	(0x1 << (1 + ((x) << 1)))	/* This dst rq is last tx of buffer on channel x */
+
+#define	AT_DMA_SYNC	0x14	/* Request Synchronization Register */
+#define		AT_DMA_SYR(h)	(0x1 << (h))			/* Synchronize handshake line h */
+
+/* Error, Chained Buffer transfer completed and Buffer transfer completed Interrupt registers */
+#define	AT_DMA_EBCIER	0x18	/* Enable register */
+#define	AT_DMA_EBCIDR	0x1C	/* Disable register */
+#define	AT_DMA_EBCIMR	0x20	/* Mask Register */
+#define	AT_DMA_EBCISR	0x24	/* Status Register */
+#define		AT_DMA_CBTC_OFFSET	8
+#define		AT_DMA_ERR_OFFSET	16
+#define		AT_DMA_BTC(x)	(0x1 << (x))
+#define		AT_DMA_CBTC(x)	(0x1 << (AT_DMA_CBTC_OFFSET + (x)))
+#define		AT_DMA_ERR(x)	(0x1 << (AT_DMA_ERR_OFFSET + (x)))
+
+#define	AT_DMA_CHER	0x28	/* Channel Handler Enable Register */
+#define		AT_DMA_ENA(x)	(0x1 << (x))
+#define		AT_DMA_SUSP(x)	(0x1 << ( 8 + (x)))
+#define		AT_DMA_KEEP(x)	(0x1 << (24 + (x)))
+
+#define	AT_DMA_CHDR	0x2C	/* Channel Handler Disable Register */
+#define		AT_DMA_DIS(x)	(0x1 << (x))
+#define		AT_DMA_RES(x)	(0x1 << ( 8 + (x)))
+
+#define	AT_DMA_CHSR	0x30	/* Channel Handler Status Register */
+#define		AT_DMA_EMPT(x)	(0x1 << (16 + (x)))
+#define		AT_DMA_STAL(x)	(0x1 << (24 + (x)))
+
+
+#define	AT_DMA_CH_REGS_BASE	0x3C	/* Channel registers base address */
+#define	ch_regs(x)	(AT_DMA_CH_REGS_BASE + (x) * 0x28) /* Channel x base addr */
+
+/* Hardware register offset for each channel */
+#define	ATC_SADDR_OFFSET	0x00	/* Source Address Register */
+#define	ATC_DADDR_OFFSET	0x04	/* Destination Address Register */
+#define	ATC_DSCR_OFFSET		0x08	/* Descriptor Address Register */
+#define	ATC_CTRLA_OFFSET	0x0C	/* Control A Register */
+#define	ATC_CTRLB_OFFSET	0x10	/* Control B Register */
+#define	ATC_CFG_OFFSET		0x14	/* Configuration Register */
+#define	ATC_SPIP_OFFSET		0x18	/* Src PIP Configuration Register */
+#define	ATC_DPIP_OFFSET		0x1C	/* Dst PIP Configuration Register */
+
+
+/* Bitfield definitions */
+
+/* Bitfields in DSCR */
+#define	ATC_DSCR_IF(i)		(0x3 & (i))	/* Dsc feched via AHB-Lite Interface i */
+
+/* Bitfields in CTRLA */
+#define	ATC_BTSIZE_MAX		0xFFFFUL	/* Maximum Buffer Transfer Size */
+#define	ATC_BTSIZE(x)		(ATC_BTSIZE_MAX & (x)) /* Buffer Transfer Size */
+/* Chunck Tranfer size definitions are in at_hdmac.h */
+#define	ATC_SRC_WIDTH_MASK	(0x3 << 24)	/* Source Single Transfer Size */
+#define		ATC_SRC_WIDTH(x)	((x) << 24)
+#define		ATC_SRC_WIDTH_BYTE	(0x0 << 24)
+#define		ATC_SRC_WIDTH_HALFWORD	(0x1 << 24)
+#define		ATC_SRC_WIDTH_WORD	(0x2 << 24)
+#define	ATC_DST_WIDTH_MASK	(0x3 << 28)	/* Destination Single Transfer Size */
+#define		ATC_DST_WIDTH(x)	((x) << 28)
+#define		ATC_DST_WIDTH_BYTE	(0x0 << 28)
+#define		ATC_DST_WIDTH_HALFWORD	(0x1 << 28)
+#define		ATC_DST_WIDTH_WORD	(0x2 << 28)
+#define	ATC_DONE		(0x1 << 31)	/* Tx Done (only written back in descriptor) */
+
+/* Bitfields in CTRLB */
+#define	ATC_SIF(i)		(0x3 & (i))	/* Src tx done via AHB-Lite Interface i */
+#define	ATC_DIF(i)		((0x3 & (i)) <<  4)	/* Dst tx done via AHB-Lite Interface i */
+#define	ATC_SRC_PIP		(0x1 <<  8)	/* Source Picture-in-Picture enabled */
+#define	ATC_DST_PIP		(0x1 << 12)	/* Destination Picture-in-Picture enabled */
+#define	ATC_SRC_DSCR_DIS	(0x1 << 16)	/* Src Descriptor fetch disable */
+#define	ATC_DST_DSCR_DIS	(0x1 << 20)	/* Dst Descriptor fetch disable */
+#define	ATC_FC_MASK		(0x7 << 21)	/* Choose Flow Controller */
+#define		ATC_FC_MEM2MEM		(0x0 << 21)	/* Mem-to-Mem (DMA) */
+#define		ATC_FC_MEM2PER		(0x1 << 21)	/* Mem-to-Periph (DMA) */
+#define		ATC_FC_PER2MEM		(0x2 << 21)	/* Periph-to-Mem (DMA) */
+#define		ATC_FC_PER2PER		(0x3 << 21)	/* Periph-to-Periph (DMA) */
+#define		ATC_FC_PER2MEM_PER	(0x4 << 21)	/* Periph-to-Mem (Peripheral) */
+#define		ATC_FC_MEM2PER_PER	(0x5 << 21)	/* Mem-to-Periph (Peripheral) */
+#define		ATC_FC_PER2PER_SRCPER	(0x6 << 21)	/* Periph-to-Periph (Src Peripheral) */
+#define		ATC_FC_PER2PER_DSTPER	(0x7 << 21)	/* Periph-to-Periph (Dst Peripheral) */
+#define	ATC_SRC_ADDR_MODE_MASK	(0x3 << 24)
+#define		ATC_SRC_ADDR_MODE_INCR	(0x0 << 24)	/* Incrementing Mode */
+#define		ATC_SRC_ADDR_MODE_DECR	(0x1 << 24)	/* Decrementing Mode */
+#define		ATC_SRC_ADDR_MODE_FIXED	(0x2 << 24)	/* Fixed Mode */
+#define	ATC_DST_ADDR_MODE_MASK	(0x3 << 28)
+#define		ATC_DST_ADDR_MODE_INCR	(0x0 << 28)	/* Incrementing Mode */
+#define		ATC_DST_ADDR_MODE_DECR	(0x1 << 28)	/* Decrementing Mode */
+#define		ATC_DST_ADDR_MODE_FIXED	(0x2 << 28)	/* Fixed Mode */
+#define	ATC_IEN			(0x1 << 30)	/* BTC interrupt enable (active low) */
+#define	ATC_AUTO		(0x1 << 31)	/* Auto multiple buffer tx enable */
+
+/* Bitfields in CFG */
+/* are in at_hdmac.h */
+
+/* Bitfields in SPIP */
+#define	ATC_SPIP_HOLE(x)	(0xFFFFU & (x))
+#define	ATC_SPIP_BOUNDARY(x)	((0x3FF & (x)) << 16)
+
+/* Bitfields in DPIP */
+#define	ATC_DPIP_HOLE(x)	(0xFFFFU & (x))
+#define	ATC_DPIP_BOUNDARY(x)	((0x3FF & (x)) << 16)
+
+
+/*--  descriptors  -----------------------------------------------------*/
+
+/* LLI == Linked List Item; aka DMA buffer descriptor */
+struct at_lli {
+	/* values that are not changed by hardware */
+	dma_addr_t	saddr;
+	dma_addr_t	daddr;
+	/* value that may get written back: */
+	u32		ctrla;
+	/* more values that are not changed by hardware */
+	u32		ctrlb;
+	dma_addr_t	dscr;	/* chain to next lli */
+};
+
+/**
+ * struct at_desc - software descriptor
+ * @at_lli: hardware lli structure
+ * @txd: support for the async_tx api
+ * @desc_node: node on the channed descriptors list
+ * @len: total transaction bytecount
+ */
+struct at_desc {
+	/* FIRST values the hardware uses */
+	struct at_lli			lli;
+
+	/* THEN values for driver housekeeping */
+	struct dma_async_tx_descriptor	txd;
+	struct list_head		desc_node;
+	size_t				len;
+};
+
+static inline struct at_desc *
+txd_to_at_desc(struct dma_async_tx_descriptor *txd)
+{
+	return container_of(txd, struct at_desc, txd);
+}
+
+
+/*--  Channels  --------------------------------------------------------*/
+
+/**
+ * struct at_dma_chan - internal representation of an Atmel HDMAC channel
+ * @chan_common: common dmaengine channel object members
+ * @device: parent device
+ * @ch_regs: memory mapped register base
+ * @mask: channel index in a mask
+ * @error_status: transmit error status information from irq handler
+ *                to tasklet (use atomic operations)
+ * @tasklet: bottom half to finish transaction work
+ * @lock: serializes enqueue/dequeue operations to descriptors lists
+ * @completed_cookie: identifier for the most recently completed operation
+ * @active_list: list of descriptors dmaengine is being running on
+ * @queue: list of descriptors ready to be submitted to engine
+ * @free_list: list of descriptors usable by the channel
+ * @descs_allocated: records the actual size of the descriptor pool
+ */
+struct at_dma_chan {
+	struct dma_chan		chan_common;
+	struct at_dma		*device;
+	void __iomem		*ch_regs;
+	u8			mask;
+	unsigned long		error_status;
+	struct tasklet_struct	tasklet;
+
+	spinlock_t		lock;
+
+	/* these other elements are all protected by lock */
+	dma_cookie_t		completed_cookie;
+	struct list_head	active_list;
+	struct list_head	queue;
+	struct list_head	free_list;
+	unsigned int		descs_allocated;
+};
+
+#define	channel_readl(atchan, name) \
+	__raw_readl((atchan)->ch_regs + ATC_##name##_OFFSET)
+
+#define	channel_writel(atchan, name, val) \
+	__raw_writel((val), (atchan)->ch_regs + ATC_##name##_OFFSET)
+
+static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan)
+{
+	return container_of(dchan, struct at_dma_chan, chan_common);
+}
+
+
+/*--  Controller  ------------------------------------------------------*/
+
+/**
+ * struct at_dma - internal representation of an Atmel HDMA Controller
+ * @chan_common: common dmaengine dma_device object members
+ * @ch_regs: memory mapped register base
+ * @clk: dma controller clock
+ * @all_chan_mask: all channels availlable in a mask
+ * @dma_desc_pool: base of DMA descriptor region (DMA address)
+ * @chan: channels table to store at_dma_chan structures
+ */
+struct at_dma {
+	struct dma_device	dma_common;
+	void __iomem		*regs;
+	struct clk		*clk;
+
+	u8			all_chan_mask;
+
+	struct dma_pool		*dma_desc_pool;
+	/* AT THE END channels table */
+	struct at_dma_chan	chan[0];
+};
+
+#define	dma_readl(atdma, name) \
+	__raw_readl((atdma)->regs + AT_DMA_##name)
+#define	dma_writel(atdma, name, val) \
+	__raw_writel((val), (atdma)->regs + AT_DMA_##name)
+
+static inline struct at_dma *to_at_dma(struct dma_device *ddev)
+{
+	return container_of(ddev, struct at_dma, dma_common);
+}
+
+
+/*--  Helper functions  ------------------------------------------------*/
+
+static struct device *chan2dev(struct dma_chan *chan)
+{
+	return &chan->dev->device;
+}
+static struct device *chan2parent(struct dma_chan *chan)
+{
+	return chan->dev->device.parent;
+}
+
+#if defined(VERBOSE_DEBUG)
+static void vdbg_dump_regs(struct at_dma_chan *atchan)
+{
+	struct at_dma	*atdma = to_at_dma(atchan->chan_common.device);
+
+	dev_err(chan2dev(&atchan->chan_common),
+		"  channel %d : imr = 0x%x, chsr = 0x%x\n",
+		atchan->chan_common.chan_id,
+		dma_readl(atdma, EBCIMR),
+		dma_readl(atdma, CHSR));
+
+	dev_err(chan2dev(&atchan->chan_common),
+		"  channel: s0x%x d0x%x ctrl0x%x:0x%x cfg0x%x l0x%x\n",
+		channel_readl(atchan, SADDR),
+		channel_readl(atchan, DADDR),
+		channel_readl(atchan, CTRLA),
+		channel_readl(atchan, CTRLB),
+		channel_readl(atchan, CFG),
+		channel_readl(atchan, DSCR));
+}
+#else
+static void vdbg_dump_regs(struct at_dma_chan *atchan) {}
+#endif
+
+static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli)
+{
+	dev_printk(KERN_CRIT, chan2dev(&atchan->chan_common),
+			"  desc: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
+			lli->saddr, lli->daddr,
+			lli->ctrla, lli->ctrlb, lli->dscr);
+}
+
+
+static void atc_setup_irq(struct at_dma_chan *atchan, int on)
+{
+	struct at_dma	*atdma = to_at_dma(atchan->chan_common.device);
+	u32		ebci;
+
+	/* enable interrupts on buffer chain completion & error */
+	ebci =    AT_DMA_CBTC(atchan->chan_common.chan_id)
+		| AT_DMA_ERR(atchan->chan_common.chan_id);
+	if (on)
+		dma_writel(atdma, EBCIER, ebci);
+	else
+		dma_writel(atdma, EBCIDR, ebci);
+}
+
+static inline void atc_enable_irq(struct at_dma_chan *atchan)
+{
+	atc_setup_irq(atchan, 1);
+}
+
+static inline void atc_disable_irq(struct at_dma_chan *atchan)
+{
+	atc_setup_irq(atchan, 0);
+}
+
+
+/**
+ * atc_chan_is_enabled - test if given channel is enabled
+ * @atchan: channel we want to test status
+ */
+static inline int atc_chan_is_enabled(struct at_dma_chan *atchan)
+{
+	struct at_dma	*atdma = to_at_dma(atchan->chan_common.device);
+
+	return !!(dma_readl(atdma, CHSR) & atchan->mask);
+}
+
+
+/**
+ * set_desc_eol - set end-of-link to descriptor so it will end transfer
+ * @desc: descriptor, signle or at the end of a chain, to end chain on
+ */
+static void set_desc_eol(struct at_desc *desc)
+{
+	desc->lli.ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS;
+	desc->lli.dscr = 0;
+}
+
+#endif /* AT_HDMAC_REGS_H */
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index fb7da5141e9..d93017fc787 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -38,6 +38,11 @@ module_param(max_channels, uint, S_IRUGO);
 MODULE_PARM_DESC(max_channels,
 		"Maximum number of channels to use (default: all)");
 
+static unsigned int iterations;
+module_param(iterations, uint, S_IRUGO);
+MODULE_PARM_DESC(iterations,
+		"Iterations before stopping test (default: infinite)");
+
 static unsigned int xor_sources = 3;
 module_param(xor_sources, uint, S_IRUGO);
 MODULE_PARM_DESC(xor_sources,
@@ -114,7 +119,7 @@ static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len)
 			buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
 		for ( ; i < start + len; i++)
 			buf[i] = PATTERN_SRC | PATTERN_COPY
-				| (~i & PATTERN_COUNT_MASK);;
+				| (~i & PATTERN_COUNT_MASK);
 		for ( ; i < test_buf_size; i++)
 			buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
 		buf++;
@@ -270,7 +275,8 @@ static int dmatest_func(void *data)
 
 	flags = DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP | DMA_PREP_INTERRUPT;
 
-	while (!kthread_should_stop()) {
+	while (!kthread_should_stop()
+	       && !(iterations && total_tests >= iterations)) {
 		struct dma_device *dev = chan->device;
 		struct dma_async_tx_descriptor *tx = NULL;
 		dma_addr_t dma_srcs[src_cnt];
@@ -416,6 +422,13 @@ err_srcbuf:
 err_srcs:
 	pr_notice("%s: terminating after %u tests, %u failures (status %d)\n",
 			thread_name, total_tests, failed_tests, ret);
+
+	if (iterations > 0)
+		while (!kthread_should_stop()) {
+			DECLARE_WAIT_QUEUE_HEAD(wait_dmatest_exit);
+			interruptible_sleep_on(&wait_dmatest_exit);
+		}
+
 	return ret;
 }
 
@@ -495,11 +508,11 @@ static int dmatest_add_channel(struct dma_chan *chan)
 
 	if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) {
 		cnt = dmatest_add_threads(dtc, DMA_MEMCPY);
-		thread_count += cnt > 0 ?: 0;
+		thread_count += cnt > 0 ? cnt : 0;
 	}
 	if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
 		cnt = dmatest_add_threads(dtc, DMA_XOR);
-		thread_count += cnt > 0 ?: 0;
+		thread_count += cnt > 0 ? cnt : 0;
 	}
 
 	pr_info("dmatest: Started %u threads using %s\n",
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index f18d1bde043..ef87a898414 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -12,6 +12,11 @@
  *   also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc.
  *   The support for MPC8349 DMA contorller is also added.
  *
+ * This driver instructs the DMA controller to issue the PCI Read Multiple
+ * command for PCI read operations, instead of using the default PCI Read Line
+ * command. Please be aware that this setting may result in read pre-fetching
+ * on some platforms.
+ *
  * This is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -49,9 +54,10 @@ static void dma_init(struct fsl_dma_chan *fsl_chan)
 	case FSL_DMA_IP_83XX:
 		/* Set the channel to below modes:
 		 * EOTIE - End-of-transfer interrupt enable
+		 * PRC_RM - PCI read multiple
 		 */
-		DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE,
-				32);
+		DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE
+				| FSL_DMA_MR_PRC_RM, 32);
 		break;
 	}
 
@@ -136,15 +142,16 @@ static int dma_is_idle(struct fsl_dma_chan *fsl_chan)
 
 static void dma_start(struct fsl_dma_chan *fsl_chan)
 {
-	u32 mr_set = 0;;
+	u32 mr_set = 0;
 
 	if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) {
 		DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32);
 		mr_set |= FSL_DMA_MR_EMP_EN;
-	} else
+	} else if ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) {
 		DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
 			DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
 				& ~FSL_DMA_MR_EMP_EN, 32);
+	}
 
 	if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT)
 		mr_set |= FSL_DMA_MR_EMS_EN;
@@ -871,9 +878,9 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev,
 
 	switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) {
 	case FSL_DMA_IP_85XX:
-		new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
 		new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
 	case FSL_DMA_IP_83XX:
+		new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
 		new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size;
 		new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size;
 	}
diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h
index 4f21a512d84..dc7f2686579 100644
--- a/drivers/dma/fsldma.h
+++ b/drivers/dma/fsldma.h
@@ -38,6 +38,7 @@
 
 /* Special MR definition for MPC8349 */
 #define FSL_DMA_MR_EOTIE	0x00000080
+#define FSL_DMA_MR_PRC_RM	0x00000800
 
 #define FSL_DMA_SR_CH		0x00000020
 #define FSL_DMA_SR_PE		0x00000010
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index ddab94f5122..3f23eabe09f 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1176,7 +1176,7 @@ static int __devinit mv_xor_probe(struct platform_device *pdev)
 	if (dma_has_cap(DMA_MEMSET, dma_dev->cap_mask))
 		dma_dev->device_prep_dma_memset = mv_xor_prep_dma_memset;
 	if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
-		dma_dev->max_xor = 8;                  ;
+		dma_dev->max_xor = 8;
 		dma_dev->device_prep_dma_xor = mv_xor_prep_dma_xor;
 	}
 
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index c36bf40568c..e2a10bcba7a 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -754,13 +754,13 @@ static void amd64_cpu_display_info(struct amd64_pvt *pvt)
 static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt)
 {
 	int bit;
-	enum dev_type edac_cap = EDAC_NONE;
+	enum dev_type edac_cap = EDAC_FLAG_NONE;
 
 	bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F)
 		? 19
 		: 17;
 
-	if (pvt->dclr0 >> BIT(bit))
+	if (pvt->dclr0 & BIT(bit))
 		edac_cap = EDAC_FLAG_SECDED;
 
 	return edac_cap;
@@ -868,6 +868,8 @@ static void amd64_read_dbam_reg(struct amd64_pvt *pvt)
 			goto err_reg;
 	}
 
+	return;
+
 err_reg:
 	debugf0("Error reading F2x%03x.\n", reg);
 }
@@ -970,7 +972,7 @@ static void amd64_read_dct_base_mask(struct amd64_pvt *pvt)
 	}
 
 	for (cs = 0; cs < pvt->num_dcsm; cs++) {
-		reg = K8_DCSB0 + (cs * 4);
+		reg = K8_DCSM0 + (cs * 4);
 		err = pci_read_config_dword(pvt->dram_f2_ctl, reg,
 					&pvt->dcsm0[cs]);
 		if (unlikely(err))
@@ -1269,7 +1271,7 @@ static int f10_early_channel_count(struct amd64_pvt *pvt)
 	if (channels == 0)
 		channels = 1;
 
-	debugf0("DIMM count= %d\n", channels);
+	debugf0("MCT channel count: %d\n", channels);
 
 	return channels;
 
@@ -2634,6 +2636,8 @@ static void amd64_read_mc_registers(struct amd64_pvt *pvt)
 
 	amd64_dump_misc_regs(pvt);
 
+	return;
+
 err_reg:
 	debugf0("Reading an MC register failed\n");
 
@@ -2966,12 +2970,20 @@ static int amd64_check_ecc_enabled(struct amd64_pvt *pvt)
 				"    Use of the override can cause "
 				"unknown side effects.\n");
 			ret = -ENODEV;
-		}
+		} else
+			/*
+			 * enable further driver loading if ECC enable is
+			 * overridden.
+			 */
+			ret = 0;
 	} else {
 		amd64_printk(KERN_INFO,
 			"ECC is enabled by BIOS, Proceeding "
 			"with EDAC module initialization\n");
 
+		/* Signal good ECC status */
+		ret = 0;
+
 		/* CLEAR the override, since BIOS controlled it */
 		ecc_enable_override = 0;
 	}
@@ -3006,7 +3018,6 @@ static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci)
 
 	mci->mtype_cap		= MEM_FLAG_DDR2 | MEM_FLAG_RDDR2;
 	mci->edac_ctl_cap	= EDAC_FLAG_NONE;
-	mci->edac_cap		= EDAC_FLAG_NONE;
 
 	if (pvt->nbcap & K8_NBCAP_SECDED)
 		mci->edac_ctl_cap |= EDAC_FLAG_SECDED;
@@ -3052,7 +3063,7 @@ static int amd64_probe_one_instance(struct pci_dev *dram_f2_ctl,
 	if (!pvt)
 		goto err_exit;
 
-	pvt->mc_node_id = get_mc_node_id_from_pdev(dram_f2_ctl);
+	pvt->mc_node_id = get_node_id(dram_f2_ctl);
 
 	pvt->dram_f2_ctl	= dram_f2_ctl;
 	pvt->ext_model		= boot_cpu_data.x86_model >> 4;
@@ -3179,8 +3190,7 @@ static int __devinit amd64_init_one_instance(struct pci_dev *pdev,
 {
 	int ret = 0;
 
-	debugf0("(MC node=%d,mc_type='%s')\n",
-		get_mc_node_id_from_pdev(pdev),
+	debugf0("(MC node=%d,mc_type='%s')\n", get_node_id(pdev),
 		get_amd_family_name(mc_type->driver_data));
 
 	ret = pci_enable_device(pdev);
@@ -3319,15 +3329,17 @@ static int __init amd64_edac_init(void)
 
 		err = amd64_init_2nd_stage(pvt_lookup[nb]);
 		if (err)
-			goto err_exit;
+			goto err_2nd_stage;
 	}
 
 	amd64_setup_pci_device();
 
 	return 0;
 
+err_2nd_stage:
+	debugf0("2nd stage failed\n");
+
 err_exit:
-	debugf0("'finish_setup' stage failed\n");
 	pci_unregister_driver(&amd64_pci_driver);
 
 	return err;
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index a159957e167..ba73015af8e 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -444,7 +444,7 @@ enum {
 #define K8_MSR_MC4ADDR			0x0412
 
 /* AMD sets the first MC device at device ID 0x18. */
-static inline int get_mc_node_id_from_pdev(struct pci_dev *pdev)
+static inline int get_node_id(struct pci_dev *pdev)
 {
 	return PCI_SLOT(pdev->devfn) - 0x18;
 }
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 3493c6bdb82..871c13b4c14 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -150,6 +150,8 @@ enum mem_type {
 	MEM_FB_DDR2,		/* fully buffered DDR2 */
 	MEM_RDDR2,		/* Registered DDR2 RAM */
 	MEM_XDR,		/* Rambus XDR */
+	MEM_DDR3,		/* DDR3 RAM */
+	MEM_RDDR3,		/* Registered DDR3 RAM */
 };
 
 #define MEM_FLAG_EMPTY		BIT(MEM_EMPTY)
@@ -167,6 +169,8 @@ enum mem_type {
 #define MEM_FLAG_FB_DDR2        BIT(MEM_FB_DDR2)
 #define MEM_FLAG_RDDR2          BIT(MEM_RDDR2)
 #define MEM_FLAG_XDR            BIT(MEM_XDR)
+#define MEM_FLAG_DDR3		 BIT(MEM_DDR3)
+#define MEM_FLAG_RDDR3		 BIT(MEM_RDDR3)
 
 /* chipset Error Detection and Correction capabilities and mode */
 enum edac_type {
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index ad218fe4942..e1d4ce08348 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -94,7 +94,9 @@ static const char *mem_types[] = {
 	[MEM_DDR2] = "Unbuffered-DDR2",
 	[MEM_FB_DDR2] = "FullyBuffered-DDR2",
 	[MEM_RDDR2] = "Registered-DDR2",
-	[MEM_XDR] = "XDR"
+	[MEM_XDR] = "XDR",
+	[MEM_DDR3] = "Unbuffered-DDR3",
+	[MEM_RDDR3] = "Registered-DDR3"
 };
 
 static const char *dev_types[] = {
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 7c8c2d72916..3f2ccfc6407 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -757,6 +757,9 @@ static void __devinit mpc85xx_init_csrows(struct mem_ctl_info *mci)
 		case DSC_SDTYPE_DDR2:
 			mtype = MEM_RDDR2;
 			break;
+		case DSC_SDTYPE_DDR3:
+			mtype = MEM_RDDR3;
+			break;
 		default:
 			mtype = MEM_UNKNOWN;
 			break;
@@ -769,6 +772,9 @@ static void __devinit mpc85xx_init_csrows(struct mem_ctl_info *mci)
 		case DSC_SDTYPE_DDR2:
 			mtype = MEM_DDR2;
 			break;
+		case DSC_SDTYPE_DDR3:
+			mtype = MEM_DDR3;
+			break;
 		default:
 			mtype = MEM_UNKNOWN;
 			break;
diff --git a/drivers/edac/mpc85xx_edac.h b/drivers/edac/mpc85xx_edac.h
index 135b3539a03..52432ee7c4b 100644
--- a/drivers/edac/mpc85xx_edac.h
+++ b/drivers/edac/mpc85xx_edac.h
@@ -53,6 +53,7 @@
 
 #define DSC_SDTYPE_DDR		0x02000000
 #define DSC_SDTYPE_DDR2		0x03000000
+#define DSC_SDTYPE_DDR3		0x07000000
 #define DSC_X32_EN	0x00000020
 
 /* Err_Int_En */
diff --git a/drivers/edac/x38_edac.c b/drivers/edac/x38_edac.c
index 2406c2ce284..d4ec6059317 100644
--- a/drivers/edac/x38_edac.c
+++ b/drivers/edac/x38_edac.c
@@ -30,7 +30,7 @@
 /* Intel X38 register addresses - device 0 function 0 - DRAM Controller */
 
 #define X38_MCHBAR_LOW	0x48	/* MCH Memory Mapped Register BAR */
-#define X38_MCHBAR_HIGH	0x4b
+#define X38_MCHBAR_HIGH	0x4c
 #define X38_MCHBAR_MASK	0xfffffc000ULL	/* bits 35:14 */
 #define X38_MMR_WINDOW_SIZE	16384
 
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index 543fccac81b..f74edae5cb4 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -196,8 +196,8 @@ static void allocate_broadcast_channel(struct fw_card *card, int generation)
 {
 	int channel, bandwidth = 0;
 
-	fw_iso_resource_manage(card, generation, 1ULL << 31,
-			       &channel, &bandwidth, true);
+	fw_iso_resource_manage(card, generation, 1ULL << 31, &channel,
+			       &bandwidth, true, card->bm_transaction_data);
 	if (channel == 31) {
 		card->broadcast_channel_allocated = true;
 		device_for_each_child(card->device, (void *)(long)generation,
@@ -230,7 +230,6 @@ static void fw_card_bm_work(struct work_struct *work)
 	bool do_reset = false;
 	bool root_device_is_running;
 	bool root_device_is_cmc;
-	__be32 lock_data[2];
 
 	spin_lock_irqsave(&card->lock, flags);
 
@@ -273,22 +272,23 @@ static void fw_card_bm_work(struct work_struct *work)
 			goto pick_me;
 		}
 
-		lock_data[0] = cpu_to_be32(0x3f);
-		lock_data[1] = cpu_to_be32(local_id);
+		card->bm_transaction_data[0] = cpu_to_be32(0x3f);
+		card->bm_transaction_data[1] = cpu_to_be32(local_id);
 
 		spin_unlock_irqrestore(&card->lock, flags);
 
 		rcode = fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP,
 				irm_id, generation, SCODE_100,
 				CSR_REGISTER_BASE + CSR_BUS_MANAGER_ID,
-				lock_data, sizeof(lock_data));
+				card->bm_transaction_data,
+				sizeof(card->bm_transaction_data));
 
 		if (rcode == RCODE_GENERATION)
 			/* Another bus reset, BM work has been rescheduled. */
 			goto out;
 
 		if (rcode == RCODE_COMPLETE &&
-		    lock_data[0] != cpu_to_be32(0x3f)) {
+		    card->bm_transaction_data[0] != cpu_to_be32(0x3f)) {
 
 			/* Somebody else is BM.  Only act as IRM. */
 			if (local_id == irm_id)
diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c
index d1d30c615b0..ced186d7e9a 100644
--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -125,6 +125,7 @@ struct iso_resource {
 	int generation;
 	u64 channels;
 	s32 bandwidth;
+	__be32 transaction_data[2];
 	struct iso_resource_event *e_alloc, *e_dealloc;
 };
 
@@ -1049,7 +1050,8 @@ static void iso_resource_work(struct work_struct *work)
 			r->channels, &channel, &bandwidth,
 			todo == ISO_RES_ALLOC ||
 			todo == ISO_RES_REALLOC ||
-			todo == ISO_RES_ALLOC_ONCE);
+			todo == ISO_RES_ALLOC_ONCE,
+			r->transaction_data);
 	/*
 	 * Is this generation outdated already?  As long as this resource sticks
 	 * in the idr, it will be scheduled again for a newer generation or at
diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c
index 166f19c6d38..1c0b504a42f 100644
--- a/drivers/firewire/core-iso.c
+++ b/drivers/firewire/core-iso.c
@@ -177,9 +177,8 @@ EXPORT_SYMBOL(fw_iso_context_stop);
  */
 
 static int manage_bandwidth(struct fw_card *card, int irm_id, int generation,
-			    int bandwidth, bool allocate)
+			    int bandwidth, bool allocate, __be32 data[2])
 {
-	__be32 data[2];
 	int try, new, old = allocate ? BANDWIDTH_AVAILABLE_INITIAL : 0;
 
 	/*
@@ -197,7 +196,7 @@ static int manage_bandwidth(struct fw_card *card, int irm_id, int generation,
 		switch (fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP,
 				irm_id, generation, SCODE_100,
 				CSR_REGISTER_BASE + CSR_BANDWIDTH_AVAILABLE,
-				data, sizeof(data))) {
+				data, 8)) {
 		case RCODE_GENERATION:
 			/* A generation change frees all bandwidth. */
 			return allocate ? -EAGAIN : bandwidth;
@@ -215,9 +214,9 @@ static int manage_bandwidth(struct fw_card *card, int irm_id, int generation,
 }
 
 static int manage_channel(struct fw_card *card, int irm_id, int generation,
-			  u32 channels_mask, u64 offset, bool allocate)
+		u32 channels_mask, u64 offset, bool allocate, __be32 data[2])
 {
-	__be32 data[2], c, all, old;
+	__be32 c, all, old;
 	int i, retry = 5;
 
 	old = all = allocate ? cpu_to_be32(~0) : 0;
@@ -234,7 +233,7 @@ static int manage_channel(struct fw_card *card, int irm_id, int generation,
 		data[1] = old ^ c;
 		switch (fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP,
 					   irm_id, generation, SCODE_100,
-					   offset, data, sizeof(data))) {
+					   offset, data, 8)) {
 		case RCODE_GENERATION:
 			/* A generation change frees all channels. */
 			return allocate ? -EAGAIN : i;
@@ -260,7 +259,7 @@ static int manage_channel(struct fw_card *card, int irm_id, int generation,
 }
 
 static void deallocate_channel(struct fw_card *card, int irm_id,
-			       int generation, int channel)
+			       int generation, int channel, __be32 buffer[2])
 {
 	u32 mask;
 	u64 offset;
@@ -269,7 +268,7 @@ static void deallocate_channel(struct fw_card *card, int irm_id,
 	offset = channel < 32 ? CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI :
 				CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO;
 
-	manage_channel(card, irm_id, generation, mask, offset, false);
+	manage_channel(card, irm_id, generation, mask, offset, false, buffer);
 }
 
 /**
@@ -298,7 +297,7 @@ static void deallocate_channel(struct fw_card *card, int irm_id,
  */
 void fw_iso_resource_manage(struct fw_card *card, int generation,
 			    u64 channels_mask, int *channel, int *bandwidth,
-			    bool allocate)
+			    bool allocate, __be32 buffer[2])
 {
 	u32 channels_hi = channels_mask;	/* channels 31...0 */
 	u32 channels_lo = channels_mask >> 32;	/* channels 63...32 */
@@ -310,10 +309,12 @@ void fw_iso_resource_manage(struct fw_card *card, int generation,
 
 	if (channels_hi)
 		c = manage_channel(card, irm_id, generation, channels_hi,
-		    CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI, allocate);
+				CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI,
+				allocate, buffer);
 	if (channels_lo && c < 0) {
 		c = manage_channel(card, irm_id, generation, channels_lo,
-		    CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO, allocate);
+				CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO,
+				allocate, buffer);
 		if (c >= 0)
 			c += 32;
 	}
@@ -325,12 +326,13 @@ void fw_iso_resource_manage(struct fw_card *card, int generation,
 	if (*bandwidth == 0)
 		return;
 
-	ret = manage_bandwidth(card, irm_id, generation, *bandwidth, allocate);
+	ret = manage_bandwidth(card, irm_id, generation, *bandwidth,
+			       allocate, buffer);
 	if (ret < 0)
 		*bandwidth = 0;
 
 	if (allocate && ret < 0 && c >= 0) {
-		deallocate_channel(card, irm_id, generation, c);
+		deallocate_channel(card, irm_id, generation, c, buffer);
 		*channel = ret;
 	}
 }
diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h
index c3cfc647e5e..6052816be35 100644
--- a/drivers/firewire/core.h
+++ b/drivers/firewire/core.h
@@ -120,7 +120,8 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event);
 
 int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma);
 void fw_iso_resource_manage(struct fw_card *card, int generation,
-		u64 channels_mask, int *channel, int *bandwidth, bool allocate);
+			    u64 channels_mask, int *channel, int *bandwidth,
+			    bool allocate, __be32 buffer[2]);
 
 
 /* -topology */
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index ecddd11b797..76b321bb73f 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -34,6 +34,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
+#include <linux/pci_ids.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
 
@@ -2372,6 +2373,9 @@ static void ohci_pmac_off(struct pci_dev *dev)
 #define ohci_pmac_off(dev)
 #endif /* CONFIG_PPC_PMAC */
 
+#define PCI_VENDOR_ID_AGERE		PCI_VENDOR_ID_ATT
+#define PCI_DEVICE_ID_AGERE_FW643	0x5901
+
 static int __devinit pci_probe(struct pci_dev *dev,
 			       const struct pci_device_id *ent)
 {
@@ -2422,6 +2426,16 @@ static int __devinit pci_probe(struct pci_dev *dev,
 	version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
 	ohci->use_dualbuffer = version >= OHCI_VERSION_1_1;
 
+	/* dual-buffer mode is broken if more than one IR context is active */
+	if (dev->vendor == PCI_VENDOR_ID_AGERE &&
+	    dev->device == PCI_DEVICE_ID_AGERE_FW643)
+		ohci->use_dualbuffer = false;
+
+	/* dual-buffer mode is broken */
+	if (dev->vendor == PCI_VENDOR_ID_RICOH &&
+	    dev->device == PCI_DEVICE_ID_RICOH_R5C832)
+		ohci->use_dualbuffer = false;
+
 /* x86-32 currently doesn't use highmem for dma_alloc_coherent */
 #if !defined(CONFIG_X86_32)
 	/* dual-buffer mode is broken with descriptor addresses above 2G */
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 24c45635376..e5df822a813 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -201,6 +201,12 @@ static struct fw_device *target_device(struct sbp2_target *tgt)
 #define SBP2_CYCLE_LIMIT		(0xc8 << 12)	/* 200 125us cycles */
 
 /*
+ * There is no transport protocol limit to the CDB length,  but we implement
+ * a fixed length only.  16 bytes is enough for disks larger than 2 TB.
+ */
+#define SBP2_MAX_CDB_SIZE		16
+
+/*
  * The default maximum s/g segment size of a FireWire controller is
  * usually 0x10000, but SBP-2 only allows 0xffff. Since buffers have to
  * be quadlet-aligned, we set the length limit to 0xffff & ~3.
@@ -312,7 +318,7 @@ struct sbp2_command_orb {
 		struct sbp2_pointer next;
 		struct sbp2_pointer data_descriptor;
 		__be32 misc;
-		u8 command_block[12];
+		u8 command_block[SBP2_MAX_CDB_SIZE];
 	} request;
 	struct scsi_cmnd *cmd;
 	scsi_done_fn_t done;
@@ -450,12 +456,12 @@ static void sbp2_status_write(struct fw_card *card, struct fw_request *request,
 	}
 	spin_unlock_irqrestore(&card->lock, flags);
 
-	if (&orb->link != &lu->orb_list)
+	if (&orb->link != &lu->orb_list) {
 		orb->callback(orb, &status);
-	else
+		kref_put(&orb->kref, free_orb);
+	} else {
 		fw_error("status write for unknown orb\n");
-
-	kref_put(&orb->kref, free_orb);
+	}
 
 	fw_send_response(card, request, RCODE_COMPLETE);
 }
@@ -1146,6 +1152,8 @@ static int sbp2_probe(struct device *dev)
 	if (fw_device_enable_phys_dma(device) < 0)
 		goto fail_shost_put;
 
+	shost->max_cmd_len = SBP2_MAX_CDB_SIZE;
+
 	if (scsi_add_host(shost, &unit->device) < 0)
 		goto fail_shost_put;
 
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3582c39f972..96dda81c922 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -79,6 +79,12 @@ config GPIO_XILINX
 	help
 	  Say yes here to support the Xilinx FPGA GPIO device
 
+config GPIO_VR41XX
+	tristate "NEC VR4100 series General-purpose I/O Uint support"
+	depends on CPU_VR41XX
+	help
+	  Say yes here to support the NEC VR4100 series General-purpose I/O Uint
+
 comment "I2C GPIO expanders:"
 
 config GPIO_MAX732X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ef90203e8f3..9244c6fcd8b 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_GPIO_PL061)	+= pl061.o
 obj-$(CONFIG_GPIO_TWL4030)	+= twl4030-gpio.o
 obj-$(CONFIG_GPIO_XILINX)	+= xilinx_gpio.o
 obj-$(CONFIG_GPIO_BT8XX)	+= bt8xxgpio.o
+obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index aa8e7cb020d..4ee4c8367a3 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -109,6 +109,16 @@ static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value)
 	writeb(!!value << offset, chip->base + (1 << (offset + 2)));
 }
 
+static int pl061_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
+
+	if (chip->irq_base == (unsigned) -1)
+		return -EINVAL;
+
+	return chip->irq_base + offset;
+}
+
 /*
  * PL061 GPIO IRQ
  */
@@ -200,7 +210,7 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
 	desc->chip->ack(irq);
 	list_for_each(ptr, chip_list) {
 		unsigned long pending;
-		int gpio;
+		int offset;
 
 		chip = list_entry(ptr, struct pl061_gpio, list);
 		pending = readb(chip->base + GPIOMIS);
@@ -209,8 +219,8 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
 		if (pending == 0)
 			continue;
 
-		for_each_bit(gpio, &pending, PL061_GPIO_NR)
-			generic_handle_irq(gpio_to_irq(gpio));
+		for_each_bit(offset, &pending, PL061_GPIO_NR)
+			generic_handle_irq(pl061_to_irq(&chip->gc, offset));
 	}
 	desc->chip->unmask(irq);
 }
@@ -221,7 +231,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
 	struct pl061_gpio *chip;
 	struct list_head *chip_list;
 	int ret, irq, i;
-	static unsigned long init_irq[BITS_TO_LONGS(NR_IRQS)];
+	static DECLARE_BITMAP(init_irq, NR_IRQS);
 
 	pdata = dev->dev.platform_data;
 	if (pdata == NULL)
@@ -251,6 +261,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
 	chip->gc.direction_output = pl061_direction_output;
 	chip->gc.get = pl061_get_value;
 	chip->gc.set = pl061_set_value;
+	chip->gc.to_irq = pl061_to_irq;
 	chip->gc.base = pdata->gpio_base;
 	chip->gc.ngpio = PL061_GPIO_NR;
 	chip->gc.label = dev_name(&dev->dev);
@@ -280,6 +291,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
 	if (!test_and_set_bit(irq, init_irq)) { /* list initialized? */
 		chip_list = kmalloc(sizeof(*chip_list), GFP_KERNEL);
 		if (chip_list == NULL) {
+			clear_bit(irq, init_irq);
 			ret = -ENOMEM;
 			goto iounmap;
 		}
diff --git a/drivers/char/vr41xx_giu.c b/drivers/gpio/vr41xx_giu.c
index 54c837288d1..b16c9a8c03f 100644
--- a/drivers/char/vr41xx_giu.c
+++ b/drivers/gpio/vr41xx_giu.c
@@ -2,8 +2,8 @@
  *  Driver for NEC VR4100 series General-purpose I/O Unit.
  *
  *  Copyright (C) 2002 MontaVista Software Inc.
- *	Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2003-2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *	Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2003-2009  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,29 +21,25 @@
  */
 #include <linux/errno.h>
 #include <linux/fs.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
-#include <asm/io.h>
 #include <asm/vr41xx/giu.h>
 #include <asm/vr41xx/irq.h>
 #include <asm/vr41xx/vr41xx.h>
 
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
 MODULE_DESCRIPTION("NEC VR4100 series General-purpose I/O Unit driver");
 MODULE_LICENSE("GPL");
 
-static int major;	/* default is dynamic major device number */
-module_param(major, int, 0);
-MODULE_PARM_DESC(major, "Major device number");
-
 #define GIUIOSELL	0x00
 #define GIUIOSELH	0x02
 #define GIUPIODL	0x04
@@ -76,9 +72,13 @@ MODULE_PARM_DESC(major, "Major device number");
 #define GPIO_HAS_OUTPUT_ENABLE		0x0002
 #define GPIO_HAS_INTERRUPT_EDGE_SELECT	0x0100
 
-static spinlock_t giu_lock;
+enum {
+	GPIO_INPUT,
+	GPIO_OUTPUT,
+};
+
+static DEFINE_SPINLOCK(giu_lock);
 static unsigned long giu_flags;
-static unsigned int giu_nr_pins;
 
 static void __iomem *giu_base;
 
@@ -89,9 +89,9 @@ static void __iomem *giu_base;
 #define GIUINT_HIGH_OFFSET	16
 #define GIUINT_HIGH_MAX		32
 
-static inline uint16_t giu_set(uint16_t offset, uint16_t set)
+static inline u16 giu_set(u16 offset, u16 set)
 {
-	uint16_t data;
+	u16 data;
 
 	data = giu_read(offset);
 	data |= set;
@@ -100,9 +100,9 @@ static inline uint16_t giu_set(uint16_t offset, uint16_t set)
 	return data;
 }
 
-static inline uint16_t giu_clear(uint16_t offset, uint16_t clear)
+static inline u16 giu_clear(u16 offset, u16 clear)
 {
-	uint16_t data;
+	u16 data;
 
 	data = giu_read(offset);
 	data &= ~clear;
@@ -145,7 +145,8 @@ static struct irq_chip giuint_low_irq_chip = {
 
 static void ack_giuint_high(unsigned int irq)
 {
-	giu_write(GIUINTSTATH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
+	giu_write(GIUINTSTATH,
+		  1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
 }
 
 static void mask_giuint_high(unsigned int irq)
@@ -177,7 +178,7 @@ static struct irq_chip giuint_high_irq_chip = {
 
 static int giu_get_irq(unsigned int irq)
 {
-	uint16_t pendl, pendh, maskl, maskh;
+	u16 pendl, pendh, maskl, maskh;
 	int i;
 
 	pendl = giu_read(GIUINTSTATL);
@@ -208,14 +209,15 @@ static int giu_get_irq(unsigned int irq)
 	return -EINVAL;
 }
 
-void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal)
+void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger,
+			    irq_signal_t signal)
 {
-	uint16_t mask;
+	u16 mask;
 
 	if (pin < GIUINT_HIGH_OFFSET) {
 		mask = 1 << pin;
 		if (trigger != IRQ_TRIGGER_LEVEL) {
-        		giu_set(GIUINTTYPL, mask);
+			giu_set(GIUINTTYPL, mask);
 			if (signal == IRQ_SIGNAL_HOLD)
 				giu_set(GIUINTHTSELL, mask);
 			else
@@ -237,14 +239,14 @@ void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_
 				}
 			}
 			set_irq_chip_and_handler(GIU_IRQ(pin),
-			                         &giuint_low_irq_chip,
-			                         handle_edge_irq);
+						 &giuint_low_irq_chip,
+						 handle_edge_irq);
 		} else {
 			giu_clear(GIUINTTYPL, mask);
 			giu_clear(GIUINTHTSELL, mask);
 			set_irq_chip_and_handler(GIU_IRQ(pin),
-			                         &giuint_low_irq_chip,
-			                         handle_level_irq);
+						 &giuint_low_irq_chip,
+						 handle_level_irq);
 		}
 		giu_write(GIUINTSTATL, mask);
 	} else if (pin < GIUINT_HIGH_MAX) {
@@ -272,14 +274,14 @@ void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_
 				}
 			}
 			set_irq_chip_and_handler(GIU_IRQ(pin),
-			                         &giuint_high_irq_chip,
-			                         handle_edge_irq);
+						 &giuint_high_irq_chip,
+						 handle_edge_irq);
 		} else {
 			giu_clear(GIUINTTYPH, mask);
 			giu_clear(GIUINTHTSELH, mask);
 			set_irq_chip_and_handler(GIU_IRQ(pin),
-			                         &giuint_high_irq_chip,
-			                         handle_level_irq);
+						 &giuint_high_irq_chip,
+						 handle_level_irq);
 		}
 		giu_write(GIUINTSTATH, mask);
 	}
@@ -288,7 +290,7 @@ EXPORT_SYMBOL_GPL(vr41xx_set_irq_trigger);
 
 void vr41xx_set_irq_level(unsigned int pin, irq_level_t level)
 {
-	uint16_t mask;
+	u16 mask;
 
 	if (pin < GIUINT_HIGH_OFFSET) {
 		mask = 1 << pin;
@@ -308,89 +310,24 @@ void vr41xx_set_irq_level(unsigned int pin, irq_level_t level)
 }
 EXPORT_SYMBOL_GPL(vr41xx_set_irq_level);
 
-gpio_data_t vr41xx_gpio_get_pin(unsigned int pin)
-{
-	uint16_t reg, mask;
-
-	if (pin >= giu_nr_pins)
-		return GPIO_DATA_INVAL;
-
-	if (pin < 16) {
-		reg = giu_read(GIUPIODL);
-		mask = (uint16_t)1 << pin;
-	} else if (pin < 32) {
-		reg = giu_read(GIUPIODH);
-		mask = (uint16_t)1 << (pin - 16);
-	} else if (pin < 48) {
-		reg = giu_read(GIUPODATL);
-		mask = (uint16_t)1 << (pin - 32);
-	} else {
-		reg = giu_read(GIUPODATH);
-		mask = (uint16_t)1 << (pin - 48);
-	}
-
-	if (reg & mask)
-		return GPIO_DATA_HIGH;
-
-	return GPIO_DATA_LOW;
-}
-EXPORT_SYMBOL_GPL(vr41xx_gpio_get_pin);
-
-int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data)
-{
-	uint16_t offset, mask, reg;
-	unsigned long flags;
-
-	if (pin >= giu_nr_pins)
-		return -EINVAL;
-
-	if (pin < 16) {
-		offset = GIUPIODL;
-		mask = (uint16_t)1 << pin;
-	} else if (pin < 32) {
-		offset = GIUPIODH;
-		mask = (uint16_t)1 << (pin - 16);
-	} else if (pin < 48) {
-		offset = GIUPODATL;
-		mask = (uint16_t)1 << (pin - 32);
-	} else {
-		offset = GIUPODATH;
-		mask = (uint16_t)1 << (pin - 48);
-	}
-
-	spin_lock_irqsave(&giu_lock, flags);
-
-	reg = giu_read(offset);
-	if (data == GPIO_DATA_HIGH)
-		reg |= mask;
-	else
-		reg &= ~mask;
-	giu_write(offset, reg);
-
-	spin_unlock_irqrestore(&giu_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(vr41xx_gpio_set_pin);
-
-int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir)
+static int giu_set_direction(struct gpio_chip *chip, unsigned pin, int dir)
 {
-	uint16_t offset, mask, reg;
+	u16 offset, mask, reg;
 	unsigned long flags;
 
-	if (pin >= giu_nr_pins)
+	if (pin >= chip->ngpio)
 		return -EINVAL;
 
 	if (pin < 16) {
 		offset = GIUIOSELL;
-		mask = (uint16_t)1 << pin;
+		mask = 1 << pin;
 	} else if (pin < 32) {
 		offset = GIUIOSELH;
-		mask = (uint16_t)1 << (pin - 16);
+		mask = 1 << (pin - 16);
 	} else {
 		if (giu_flags & GPIO_HAS_OUTPUT_ENABLE) {
 			offset = GIUPODATEN;
-			mask = (uint16_t)1 << (pin - 32);
+			mask = 1 << (pin - 32);
 		} else {
 			switch (pin) {
 			case 48:
@@ -420,11 +357,10 @@ int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(vr41xx_gpio_set_direction);
 
 int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull)
 {
-	uint16_t reg, mask;
+	u16 reg, mask;
 	unsigned long flags;
 
 	if ((giu_flags & GPIO_HAS_PULLUPDOWN_IO) != GPIO_HAS_PULLUPDOWN_IO)
@@ -433,7 +369,7 @@ int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull)
 	if (pin >= 15)
 		return -EINVAL;
 
-	mask = (uint16_t)1 << pin;
+	mask = 1 << pin;
 
 	spin_lock_irqsave(&giu_lock, flags);
 
@@ -460,146 +396,125 @@ int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull)
 }
 EXPORT_SYMBOL_GPL(vr41xx_gpio_pullupdown);
 
-static ssize_t gpio_read(struct file *file, char __user *buf, size_t len,
-                         loff_t *ppos)
+static int vr41xx_gpio_get(struct gpio_chip *chip, unsigned pin)
 {
-	unsigned int pin;
-	char value = '0';
+	u16 reg, mask;
 
-	pin = iminor(file->f_path.dentry->d_inode);
-	if (pin >= giu_nr_pins)
-		return -EBADF;
-
-	if (vr41xx_gpio_get_pin(pin) == GPIO_DATA_HIGH)
-		value = '1';
+	if (pin >= chip->ngpio)
+		return -EINVAL;
 
-	if (len <= 0)
-		return -EFAULT;
+	if (pin < 16) {
+		reg = giu_read(GIUPIODL);
+		mask = 1 << pin;
+	} else if (pin < 32) {
+		reg = giu_read(GIUPIODH);
+		mask = 1 << (pin - 16);
+	} else if (pin < 48) {
+		reg = giu_read(GIUPODATL);
+		mask = 1 << (pin - 32);
+	} else {
+		reg = giu_read(GIUPODATH);
+		mask = 1 << (pin - 48);
+	}
 
-	if (put_user(value, buf))
-		return -EFAULT;
+	if (reg & mask)
+		return 1;
 
-	return 1;
+	return 0;
 }
 
-static ssize_t gpio_write(struct file *file, const char __user *data,
-                          size_t len, loff_t *ppos)
+static void vr41xx_gpio_set(struct gpio_chip *chip, unsigned pin,
+			    int value)
 {
-	unsigned int pin;
-	size_t i;
-	char c;
-	int retval = 0;
-
-	pin = iminor(file->f_path.dentry->d_inode);
-	if (pin >= giu_nr_pins)
-		return -EBADF;
-
-	for (i = 0; i < len; i++) {
-		if (get_user(c, data + i))
-			return -EFAULT;
-
-		switch (c) {
-		case '0':
-			retval = vr41xx_gpio_set_pin(pin, GPIO_DATA_LOW);
-			break;
-		case '1':
-			retval = vr41xx_gpio_set_pin(pin, GPIO_DATA_HIGH);
-			break;
-		case 'D':
-			printk(KERN_INFO "GPIO%d: pull down\n", pin);
-			retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DOWN);
-			break;
-		case 'd':
-			printk(KERN_INFO "GPIO%d: pull up/down disable\n", pin);
-			retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DISABLE);
-			break;
-		case 'I':
-			printk(KERN_INFO "GPIO%d: input\n", pin);
-			retval = vr41xx_gpio_set_direction(pin, GPIO_INPUT);
-			break;
-		case 'O':
-			printk(KERN_INFO "GPIO%d: output\n", pin);
-			retval = vr41xx_gpio_set_direction(pin, GPIO_OUTPUT);
-			break;
-		case 'o':
-			printk(KERN_INFO "GPIO%d: output disable\n", pin);
-			retval = vr41xx_gpio_set_direction(pin, GPIO_OUTPUT_DISABLE);
-			break;
-		case 'P':
-			printk(KERN_INFO "GPIO%d: pull up\n", pin);
-			retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_UP);
-			break;
-		case 'p':
-			printk(KERN_INFO "GPIO%d: pull up/down disable\n", pin);
-			retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DISABLE);
-			break;
-		default:
-			break;
-		}
+	u16 offset, mask, reg;
+	unsigned long flags;
+
+	if (pin >= chip->ngpio)
+		return;
 
-		if (retval < 0)
-			break;
+	if (pin < 16) {
+		offset = GIUPIODL;
+		mask = 1 << pin;
+	} else if (pin < 32) {
+		offset = GIUPIODH;
+		mask = 1 << (pin - 16);
+	} else if (pin < 48) {
+		offset = GIUPODATL;
+		mask = 1 << (pin - 32);
+	} else {
+		offset = GIUPODATH;
+		mask = 1 << (pin - 48);
 	}
 
-	return i;
+	spin_lock_irqsave(&giu_lock, flags);
+
+	reg = giu_read(offset);
+	if (value)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	giu_write(offset, reg);
+
+	spin_unlock_irqrestore(&giu_lock, flags);
 }
 
-static int gpio_open(struct inode *inode, struct file *file)
+
+static int vr41xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
-	unsigned int pin;
+	return giu_set_direction(chip, offset, GPIO_INPUT);
+}
 
-	cycle_kernel_lock();
-	pin = iminor(inode);
-	if (pin >= giu_nr_pins)
-		return -EBADF;
+static int vr41xx_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+				int value)
+{
+	vr41xx_gpio_set(chip, offset, value);
 
-	return nonseekable_open(inode, file);
+	return giu_set_direction(chip, offset, GPIO_OUTPUT);
 }
 
-static int gpio_release(struct inode *inode, struct file *file)
+static int vr41xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
-	unsigned int pin;
-
-	pin = iminor(inode);
-	if (pin >= giu_nr_pins)
-		return -EBADF;
+	if (offset >= chip->ngpio)
+		return -EINVAL;
 
-	return 0;
+	return GIU_IRQ_BASE + offset;
 }
 
-static const struct file_operations gpio_fops = {
-	.owner		= THIS_MODULE,
-	.read		= gpio_read,
-	.write		= gpio_write,
-	.open		= gpio_open,
-	.release	= gpio_release,
+static struct gpio_chip vr41xx_gpio_chip = {
+	.label			= "vr41xx",
+	.owner			= THIS_MODULE,
+	.direction_input	= vr41xx_gpio_direction_input,
+	.get			= vr41xx_gpio_get,
+	.direction_output	= vr41xx_gpio_direction_output,
+	.set			= vr41xx_gpio_set,
+	.to_irq			= vr41xx_gpio_to_irq,
 };
 
-static int __devinit giu_probe(struct platform_device *dev)
+static int __devinit giu_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	unsigned int trigger, i, pin;
 	struct irq_chip *chip;
 	int irq, retval;
 
-	switch (dev->id) {
+	switch (pdev->id) {
 	case GPIO_50PINS_PULLUPDOWN:
 		giu_flags = GPIO_HAS_PULLUPDOWN_IO;
-		giu_nr_pins = 50;
+		vr41xx_gpio_chip.ngpio = 50;
 		break;
 	case GPIO_36PINS:
-		giu_nr_pins = 36;
+		vr41xx_gpio_chip.ngpio = 36;
 		break;
 	case GPIO_48PINS_EDGE_SELECT:
 		giu_flags = GPIO_HAS_INTERRUPT_EDGE_SELECT;
-		giu_nr_pins = 48;
+		vr41xx_gpio_chip.ngpio = 48;
 		break;
 	default:
-		printk(KERN_ERR "GIU: unknown ID %d\n", dev->id);
+		dev_err(&pdev->dev, "GIU: unknown ID %d\n", pdev->id);
 		return -ENODEV;
 	}
 
-	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		return -EBUSY;
 
@@ -607,19 +522,9 @@ static int __devinit giu_probe(struct platform_device *dev)
 	if (!giu_base)
 		return -ENOMEM;
 
-	retval = register_chrdev(major, "GIU", &gpio_fops);
-	if (retval < 0) {
-		iounmap(giu_base);
-		giu_base = NULL;
-		return retval;
-	}
-
-	if (major == 0) {
-		major = retval;
-		printk(KERN_INFO "GIU: major number %d\n", major);
-	}
+	vr41xx_gpio_chip.dev = &pdev->dev;
 
-	spin_lock_init(&giu_lock);
+	retval = gpiochip_add(&vr41xx_gpio_chip);
 
 	giu_write(GIUINTENL, 0);
 	giu_write(GIUINTENH, 0);
@@ -640,14 +545,14 @@ static int __devinit giu_probe(struct platform_device *dev)
 
 	}
 
-	irq = platform_get_irq(dev, 0);
+	irq = platform_get_irq(pdev, 0);
 	if (irq < 0 || irq >= nr_irqs)
 		return -EBUSY;
 
 	return cascade_irq(irq, giu_get_irq);
 }
 
-static int __devexit giu_remove(struct platform_device *dev)
+static int __devexit giu_remove(struct platform_device *pdev)
 {
 	if (giu_base) {
 		iounmap(giu_base);
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index c961fe415ae..39b393d38bb 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -81,6 +81,7 @@ config DRM_I830
 
 config DRM_I915
 	tristate "i915 driver"
+	depends on AGP_INTEL
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 4e89ab08b7b..fe23f29f7cb 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -16,6 +16,7 @@ drm-y       :=	drm_auth.o drm_bufs.o drm_cache.o \
 drm-$(CONFIG_COMPAT) += drm_ioc32.o
 
 obj-$(CONFIG_DRM)	+= drm.o
+obj-$(CONFIG_DRM_TTM)	+= ttm/
 obj-$(CONFIG_DRM_TDFX)	+= tdfx/
 obj-$(CONFIG_DRM_R128)	+= r128/
 obj-$(CONFIG_DRM_RADEON)+= radeon/
@@ -26,4 +27,3 @@ obj-$(CONFIG_DRM_I915)  += i915/
 obj-$(CONFIG_DRM_SIS)   += sis/
 obj-$(CONFIG_DRM_SAVAGE)+= savage/
 obj-$(CONFIG_DRM_VIA)	+=via/
-obj-$(CONFIG_DRM_TTM)	+= ttm/
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 8fab7890a36..2f631c75f70 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -258,31 +258,6 @@ void *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type)
 EXPORT_SYMBOL(drm_mode_object_find);
 
 /**
- * drm_crtc_from_fb - find the CRTC structure associated with an fb
- * @dev: DRM device
- * @fb: framebuffer in question
- *
- * LOCKING:
- * Caller must hold mode_config lock.
- *
- * Find CRTC in the mode_config structure that matches @fb.
- *
- * RETURNS:
- * Pointer to the CRTC or NULL if it wasn't found.
- */
-struct drm_crtc *drm_crtc_from_fb(struct drm_device *dev,
-				  struct drm_framebuffer *fb)
-{
-	struct drm_crtc *crtc;
-
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		if (crtc->fb == fb)
-			return crtc;
-	}
-	return NULL;
-}
-
-/**
  * drm_framebuffer_init - initialize a framebuffer
  * @dev: DRM device
  *
@@ -328,11 +303,20 @@ void drm_framebuffer_cleanup(struct drm_framebuffer *fb)
 {
 	struct drm_device *dev = fb->dev;
 	struct drm_crtc *crtc;
+	struct drm_mode_set set;
+	int ret;
 
 	/* remove from any CRTC */
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		if (crtc->fb == fb)
-			crtc->fb = NULL;
+		if (crtc->fb == fb) {
+			/* should turn off the crtc */
+			memset(&set, 0, sizeof(struct drm_mode_set));
+			set.crtc = crtc;
+			set.fb = NULL;
+			ret = crtc->funcs->set_config(&set);
+			if (ret)
+				DRM_ERROR("failed to reset crtc %p when fb was deleted\n", crtc);
+		}
 	}
 
 	drm_mode_object_put(dev, &fb->base);
@@ -1461,7 +1445,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data,
 		goto out;
 	}
 
-	if (crtc_req->count_connectors > 0 && !mode && !fb) {
+	if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
 		DRM_DEBUG("Count connectors is %d but no mode or fb set\n",
 			  crtc_req->count_connectors);
 		ret = -EINVAL;
@@ -1511,7 +1495,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data,
 	set.mode = mode;
 	set.connectors = connector_set;
 	set.num_connectors = crtc_req->count_connectors;
-	set.fb =fb;
+	set.fb = fb;
 	ret = crtc->funcs->set_config(&set);
 
 out:
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index a6f73f1e99d..6aaa2cb2336 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -706,8 +706,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 	struct drm_encoder **save_encoders, *new_encoder;
 	struct drm_framebuffer *old_fb = NULL;
 	bool save_enabled;
-	bool mode_changed = false;
-	bool fb_changed = false;
+	bool mode_changed = false; /* if true do a full mode set */
+	bool fb_changed = false; /* if true and !mode_changed just do a flip */
 	struct drm_connector *connector;
 	int count = 0, ro, fail = 0;
 	struct drm_crtc_helper_funcs *crtc_funcs;
@@ -758,6 +758,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 		if (set->crtc->fb == NULL) {
 			DRM_DEBUG("crtc has no fb, full mode set\n");
 			mode_changed = true;
+		} else if (set->fb == NULL) {
+			mode_changed = true;
 		} else if ((set->fb->bits_per_pixel !=
 			 set->crtc->fb->bits_per_pixel) ||
 			 set->fb->depth != set->crtc->fb->depth)
@@ -1090,6 +1092,8 @@ int drm_helper_resume_force_mode(struct drm_device *dev)
 		if (ret == false)
 			DRM_ERROR("failed to set mode on crtc %p\n", crtc);
 	}
+	/* disable the unused connectors while restoring the modesetting */
+	drm_helper_disable_unused_functions(dev);
 	return 0;
 }
 EXPORT_SYMBOL(drm_helper_resume_force_mode);
diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c
index 2960b6d7345..9903f270e44 100644
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -101,6 +101,10 @@ int drm_debugfs_create_files(struct drm_info_list *files, int count,
 			continue;
 
 		tmp = kmalloc(sizeof(struct drm_info_node), GFP_KERNEL);
+		if (tmp == NULL) {
+			ret = -1;
+			goto fail;
+		}
 		ent = debugfs_create_file(files[i].name, S_IFREG | S_IRUGO,
 					  root, tmp, &drm_debugfs_fops);
 		if (!ent) {
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 7d0835226f6..7f2728bbc16 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -294,10 +294,10 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 	unsigned vactive = (pt->vactive_vblank_hi & 0xf0) << 4 | pt->vactive_lo;
 	unsigned hblank = (pt->hactive_hblank_hi & 0xf) << 8 | pt->hblank_lo;
 	unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo;
-	unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 8 | pt->hsync_offset_lo;
-	unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 6 | pt->hsync_pulse_width_lo;
-	unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) | (pt->vsync_offset_pulse_width_lo & 0xf);
-	unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+	unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo;
+	unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo;
+	unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+	unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf);
 
 	/* ignore tiny modes */
 	if (hactive < 64 || vactive < 64)
@@ -347,8 +347,8 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 	mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ?
 		DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
 
-	mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
-	mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
+	mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
+	mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
 
 	if (quirks & EDID_QUIRK_DETAILED_IN_CM) {
 		mode->width_mm *= 10;
@@ -502,12 +502,40 @@ static int add_detailed_info(struct drm_connector *connector,
 		struct detailed_non_pixel *data = &timing->data.other_data;
 		struct drm_display_mode *newmode;
 
-		/* EDID up to and including 1.2 may put monitor info here */
-		if (edid->version == 1 && edid->revision < 3)
-			continue;
-
-		/* Detailed mode timing */
-		if (timing->pixel_clock) {
+		/* X server check is version 1.1 or higher */
+		if (edid->version == 1 && edid->revision >= 1 &&
+		    !timing->pixel_clock) {
+			/* Other timing or info */
+			switch (data->type) {
+			case EDID_DETAIL_MONITOR_SERIAL:
+				break;
+			case EDID_DETAIL_MONITOR_STRING:
+				break;
+			case EDID_DETAIL_MONITOR_RANGE:
+				/* Get monitor range data */
+				break;
+			case EDID_DETAIL_MONITOR_NAME:
+				break;
+			case EDID_DETAIL_MONITOR_CPDATA:
+				break;
+			case EDID_DETAIL_STD_MODES:
+				/* Five modes per detailed section */
+				for (j = 0; j < 5; i++) {
+					struct std_timing *std;
+					struct drm_display_mode *newmode;
+
+					std = &data->data.timings[j];
+					newmode = drm_mode_std(dev, std);
+					if (newmode) {
+						drm_mode_probed_add(connector, newmode);
+						modes++;
+					}
+				}
+				break;
+			default:
+				break;
+			}
+		} else {
 			newmode = drm_mode_detailed(dev, edid, timing, quirks);
 			if (!newmode)
 				continue;
@@ -518,38 +546,6 @@ static int add_detailed_info(struct drm_connector *connector,
 			drm_mode_probed_add(connector, newmode);
 
 			modes++;
-			continue;
-		}
-
-		/* Other timing or info */
-		switch (data->type) {
-		case EDID_DETAIL_MONITOR_SERIAL:
-			break;
-		case EDID_DETAIL_MONITOR_STRING:
-			break;
-		case EDID_DETAIL_MONITOR_RANGE:
-			/* Get monitor range data */
-			break;
-		case EDID_DETAIL_MONITOR_NAME:
-			break;
-		case EDID_DETAIL_MONITOR_CPDATA:
-			break;
-		case EDID_DETAIL_STD_MODES:
-			/* Five modes per detailed section */
-			for (j = 0; j < 5; i++) {
-				struct std_timing *std;
-				struct drm_display_mode *newmode;
-
-				std = &data->data.timings[j];
-				newmode = drm_mode_std(dev, std);
-				if (newmode) {
-					drm_mode_probed_add(connector, newmode);
-					modes++;
-				}
-			}
-			break;
-		default:
-			break;
 		}
 	}
 
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 8104ecaea26..ffe8f4394d5 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -134,26 +134,29 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size)
 	BUG_ON((size & (PAGE_SIZE - 1)) != 0);
 
 	obj = kzalloc(sizeof(*obj), GFP_KERNEL);
+	if (!obj)
+		goto free;
 
 	obj->dev = dev;
 	obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE);
-	if (IS_ERR(obj->filp)) {
-		kfree(obj);
-		return NULL;
-	}
+	if (IS_ERR(obj->filp))
+		goto free;
 
 	kref_init(&obj->refcount);
 	kref_init(&obj->handlecount);
 	obj->size = size;
 	if (dev->driver->gem_init_object != NULL &&
 	    dev->driver->gem_init_object(obj) != 0) {
-		fput(obj->filp);
-		kfree(obj);
-		return NULL;
+		goto fput;
 	}
 	atomic_inc(&dev->object_count);
 	atomic_add(obj->size, &dev->object_memory);
 	return obj;
+fput:
+	fput(obj->filp);
+free:
+	kfree(obj);
+	return NULL;
 }
 EXPORT_SYMBOL(drm_gem_object_alloc);
 
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index b4a3dbcebe9..f85aaf21e78 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -566,7 +566,7 @@ int drm_wait_vblank(struct drm_device *dev, void *data,
 
 	ret = drm_vblank_get(dev, crtc);
 	if (ret) {
-		DRM_ERROR("failed to acquire vblank counter, %d\n", ret);
+		DRM_DEBUG("failed to acquire vblank counter, %d\n", ret);
 		return ret;
 	}
 	seq = drm_vblank_count(dev, crtc);
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 54f492a488a..7914097b09c 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -566,6 +566,8 @@ void drm_mode_connector_list_update(struct drm_connector *connector)
 				found_it = 1;
 				/* if equal delete the probed mode */
 				mode->status = pmode->status;
+				/* Merge type bits together */
+				mode->type |= pmode->type;
 				list_del(&pmode->head);
 				drm_mode_destroy(connector->dev, pmode);
 				break;
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 155a5bbce68..55bb8a82d61 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -489,7 +489,7 @@ int drm_put_minor(struct drm_minor **minor_p)
  */
 void drm_put_dev(struct drm_device *dev)
 {
-	struct drm_driver *driver = dev->driver;
+	struct drm_driver *driver;
 	struct drm_map_list *r_list, *list_temp;
 
 	DRM_DEBUG("\n");
@@ -498,6 +498,7 @@ void drm_put_dev(struct drm_device *dev)
 		DRM_ERROR("cleanup called no dev\n");
 		return;
 	}
+	driver = dev->driver;
 
 	drm_vblank_cleanup(dev);
 
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 85ec31b3ff0..f7a615b80c7 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -22,44 +22,50 @@
 #define to_drm_minor(d) container_of(d, struct drm_minor, kdev)
 #define to_drm_connector(d) container_of(d, struct drm_connector, kdev)
 
+static struct device_type drm_sysfs_device_minor = {
+	.name = "drm_minor"
+};
+
 /**
- * drm_sysfs_suspend - DRM class suspend hook
+ * drm_class_suspend - DRM class suspend hook
  * @dev: Linux device to suspend
  * @state: power state to enter
  *
  * Just figures out what the actual struct drm_device associated with
  * @dev is and calls its suspend hook, if present.
  */
-static int drm_sysfs_suspend(struct device *dev, pm_message_t state)
+static int drm_class_suspend(struct device *dev, pm_message_t state)
 {
-	struct drm_minor *drm_minor = to_drm_minor(dev);
-	struct drm_device *drm_dev = drm_minor->dev;
-
-	if (drm_minor->type == DRM_MINOR_LEGACY &&
-	    !drm_core_check_feature(drm_dev, DRIVER_MODESET) &&
-	    drm_dev->driver->suspend)
-		return drm_dev->driver->suspend(drm_dev, state);
-
+	if (dev->type == &drm_sysfs_device_minor) {
+		struct drm_minor *drm_minor = to_drm_minor(dev);
+		struct drm_device *drm_dev = drm_minor->dev;
+
+		if (drm_minor->type == DRM_MINOR_LEGACY &&
+		    !drm_core_check_feature(drm_dev, DRIVER_MODESET) &&
+		    drm_dev->driver->suspend)
+			return drm_dev->driver->suspend(drm_dev, state);
+	}
 	return 0;
 }
 
 /**
- * drm_sysfs_resume - DRM class resume hook
+ * drm_class_resume - DRM class resume hook
  * @dev: Linux device to resume
  *
  * Just figures out what the actual struct drm_device associated with
  * @dev is and calls its resume hook, if present.
  */
-static int drm_sysfs_resume(struct device *dev)
+static int drm_class_resume(struct device *dev)
 {
-	struct drm_minor *drm_minor = to_drm_minor(dev);
-	struct drm_device *drm_dev = drm_minor->dev;
-
-	if (drm_minor->type == DRM_MINOR_LEGACY &&
-	    !drm_core_check_feature(drm_dev, DRIVER_MODESET) &&
-	    drm_dev->driver->resume)
-		return drm_dev->driver->resume(drm_dev);
-
+	if (dev->type == &drm_sysfs_device_minor) {
+		struct drm_minor *drm_minor = to_drm_minor(dev);
+		struct drm_device *drm_dev = drm_minor->dev;
+
+		if (drm_minor->type == DRM_MINOR_LEGACY &&
+		    !drm_core_check_feature(drm_dev, DRIVER_MODESET) &&
+		    drm_dev->driver->resume)
+			return drm_dev->driver->resume(drm_dev);
+	}
 	return 0;
 }
 
@@ -99,8 +105,8 @@ struct class *drm_sysfs_create(struct module *owner, char *name)
 		goto err_out;
 	}
 
-	class->suspend = drm_sysfs_suspend;
-	class->resume = drm_sysfs_resume;
+	class->suspend = drm_class_suspend;
+	class->resume = drm_class_resume;
 
 	err = class_create_file(class, &class_attr_version);
 	if (err)
@@ -480,6 +486,7 @@ int drm_sysfs_device_add(struct drm_minor *minor)
 	minor->kdev.class = drm_class;
 	minor->kdev.release = drm_sysfs_device_release;
 	minor->kdev.devt = minor->device;
+	minor->kdev.type = &drm_sysfs_device_minor;
 	if (minor->type == DRM_MINOR_CONTROL)
 		minor_str = "controlD%d";
         else if (minor->type == DRM_MINOR_RENDER)
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 51c5a050aa7..30d6b99fb30 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -13,6 +13,8 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \
 	  intel_crt.o \
 	  intel_lvds.o \
 	  intel_bios.o \
+	  intel_dp.o \
+	  intel_dp_i2c.o \
 	  intel_hdmi.o \
 	  intel_sdvo.o \
 	  intel_modes.o \
diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h
index e747ac42fe3..288fc50627e 100644
--- a/drivers/gpu/drm/i915/dvo.h
+++ b/drivers/gpu/drm/i915/dvo.h
@@ -37,7 +37,7 @@ struct intel_dvo_device {
 	/* GPIO register used for i2c bus to control this device */
 	u32 gpio;
 	int slave_addr;
-	struct intel_i2c_chan *i2c_bus;
+	struct i2c_adapter *i2c_bus;
 
 	const struct intel_dvo_dev_ops *dev_ops;
 	void *dev_priv;
@@ -52,7 +52,7 @@ struct intel_dvo_dev_ops {
 	 * Returns NULL if the device does not exist.
 	 */
 	bool (*init)(struct intel_dvo_device *dvo,
-		     struct intel_i2c_chan *i2cbus);
+		     struct i2c_adapter *i2cbus);
 
 	/*
 	 * Called to allow the output a chance to create properties after the
diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c
index 03d4b4973b0..621815b531d 100644
--- a/drivers/gpu/drm/i915/dvo_ch7017.c
+++ b/drivers/gpu/drm/i915/dvo_ch7017.c
@@ -176,19 +176,20 @@ static void ch7017_dpms(struct intel_dvo_device *dvo, int mode);
 
 static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val)
 {
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[2];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = in_buf,
@@ -208,10 +209,11 @@ static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val)
 
 static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val)
 {
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	uint8_t out_buf[2];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 2,
 		.buf = out_buf,
@@ -228,8 +230,9 @@ static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val)
 
 /** Probes for a CH7017 on the given bus and slave address. */
 static bool ch7017_init(struct intel_dvo_device *dvo,
-			struct intel_i2c_chan *i2cbus)
+			struct i2c_adapter *adapter)
 {
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	struct ch7017_priv *priv;
 	uint8_t val;
 
@@ -237,8 +240,7 @@ static bool ch7017_init(struct intel_dvo_device *dvo,
 	if (priv == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = priv;
 
 	if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val))
@@ -248,7 +250,7 @@ static bool ch7017_init(struct intel_dvo_device *dvo,
 	    val != CH7018_DEVICE_ID_VALUE &&
 	    val != CH7019_DEVICE_ID_VALUE) {
 		DRM_DEBUG("ch701x not detected, got %d: from %s Slave %d.\n",
-			  val, i2cbus->adapter.name,i2cbus->slave_addr);
+			  val, i2cbus->adapter.name,dvo->slave_addr);
 		goto fail;
 	}
 
diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c
index d2fd95dbd03..a9b89628968 100644
--- a/drivers/gpu/drm/i915/dvo_ch7xxx.c
+++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c
@@ -123,19 +123,20 @@ static char *ch7xxx_get_id(uint8_t vid)
 static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 {
 	struct ch7xxx_priv *ch7xxx= dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[2];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = in_buf,
@@ -152,7 +153,7 @@ static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 
 	if (!ch7xxx->quiet) {
 		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 	return false;
 }
@@ -161,10 +162,11 @@ static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
 {
 	struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	uint8_t out_buf[2];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 2,
 		.buf = out_buf,
@@ -178,14 +180,14 @@ static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
 
 	if (!ch7xxx->quiet) {
 		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 
 	return false;
 }
 
 static bool ch7xxx_init(struct intel_dvo_device *dvo,
-			struct intel_i2c_chan *i2cbus)
+			struct i2c_adapter *adapter)
 {
 	/* this will detect the CH7xxx chip on the specified i2c bus */
 	struct ch7xxx_priv *ch7xxx;
@@ -196,8 +198,7 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo,
 	if (ch7xxx == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = ch7xxx;
 	ch7xxx->quiet = true;
 
@@ -207,7 +208,7 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo,
 	name = ch7xxx_get_id(vendor);
 	if (!name) {
 		DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
-			  vendor, i2cbus->adapter.name, i2cbus->slave_addr);
+			  vendor, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 
@@ -217,7 +218,7 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo,
 
 	if (device != CH7xxx_DID) {
 		DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
-			  vendor, i2cbus->adapter.name, i2cbus->slave_addr);
+			  vendor, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 
diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c
index 0c8d375e8e3..aa176f9921f 100644
--- a/drivers/gpu/drm/i915/dvo_ivch.c
+++ b/drivers/gpu/drm/i915/dvo_ivch.c
@@ -169,13 +169,14 @@ static void ivch_dump_regs(struct intel_dvo_device *dvo);
 static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
 {
 	struct ivch_priv *priv = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[1];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 0,
 		},
@@ -186,7 +187,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD | I2C_M_NOSTART,
 			.len = 2,
 			.buf = in_buf,
@@ -202,7 +203,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
 
 	if (!priv->quiet) {
 		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 	return false;
 }
@@ -211,10 +212,11 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
 static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
 {
 	struct ivch_priv *priv = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[3];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 3,
 		.buf = out_buf,
@@ -229,7 +231,7 @@ static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
 
 	if (!priv->quiet) {
 		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 
 	return false;
@@ -237,7 +239,7 @@ static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
 
 /** Probes the given bus and slave address for an ivch */
 static bool ivch_init(struct intel_dvo_device *dvo,
-		      struct intel_i2c_chan *i2cbus)
+		      struct i2c_adapter *adapter)
 {
 	struct ivch_priv *priv;
 	uint16_t temp;
@@ -246,8 +248,7 @@ static bool ivch_init(struct intel_dvo_device *dvo,
 	if (priv == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = priv;
 	priv->quiet = true;
 
diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c
index 033a4bb070b..e1c1f7341e5 100644
--- a/drivers/gpu/drm/i915/dvo_sil164.c
+++ b/drivers/gpu/drm/i915/dvo_sil164.c
@@ -76,19 +76,20 @@ struct sil164_priv {
 static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 {
 	struct sil164_priv *sil = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[2];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = in_buf,
@@ -105,7 +106,7 @@ static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 
 	if (!sil->quiet) {
 		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 	return false;
 }
@@ -113,10 +114,11 @@ static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
 {
 	struct sil164_priv *sil= dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	uint8_t out_buf[2];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 2,
 		.buf = out_buf,
@@ -130,7 +132,7 @@ static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
 
 	if (!sil->quiet) {
 		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 
 	return false;
@@ -138,7 +140,7 @@ static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
 
 /* Silicon Image 164 driver for chip on i2c bus */
 static bool sil164_init(struct intel_dvo_device *dvo,
-			struct intel_i2c_chan *i2cbus)
+			struct i2c_adapter *adapter)
 {
 	/* this will detect the SIL164 chip on the specified i2c bus */
 	struct sil164_priv *sil;
@@ -148,8 +150,7 @@ static bool sil164_init(struct intel_dvo_device *dvo,
 	if (sil == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = sil;
 	sil->quiet = true;
 
@@ -158,7 +159,7 @@ static bool sil164_init(struct intel_dvo_device *dvo,
 
 	if (ch != (SIL164_VID & 0xff)) {
 		DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
-			  ch, i2cbus->adapter.name, i2cbus->slave_addr);
+			  ch, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 
@@ -167,7 +168,7 @@ static bool sil164_init(struct intel_dvo_device *dvo,
 
 	if (ch != (SIL164_DID & 0xff)) {
 		DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
-			  ch, i2cbus->adapter.name, i2cbus->slave_addr);
+			  ch, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 	sil->quiet = false;
diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c
index 207fda806eb..9ecc907384e 100644
--- a/drivers/gpu/drm/i915/dvo_tfp410.c
+++ b/drivers/gpu/drm/i915/dvo_tfp410.c
@@ -101,19 +101,20 @@ struct tfp410_priv {
 static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 {
 	struct tfp410_priv *tfp = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[2];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = in_buf,
@@ -130,7 +131,7 @@ static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 
 	if (!tfp->quiet) {
 		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 	return false;
 }
@@ -138,10 +139,11 @@ static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
 {
 	struct tfp410_priv *tfp = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	uint8_t out_buf[2];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 2,
 		.buf = out_buf,
@@ -155,7 +157,7 @@ static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
 
 	if (!tfp->quiet) {
 		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 
 	return false;
@@ -174,7 +176,7 @@ static int tfp410_getid(struct intel_dvo_device *dvo, int addr)
 
 /* Ti TFP410 driver for chip on i2c bus */
 static bool tfp410_init(struct intel_dvo_device *dvo,
-			struct intel_i2c_chan *i2cbus)
+			struct i2c_adapter *adapter)
 {
 	/* this will detect the tfp410 chip on the specified i2c bus */
 	struct tfp410_priv *tfp;
@@ -184,20 +186,19 @@ static bool tfp410_init(struct intel_dvo_device *dvo,
 	if (tfp == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = tfp;
 	tfp->quiet = true;
 
 	if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) {
 		DRM_DEBUG("tfp410 not detected got VID %X: from %s Slave %d.\n",
-			  id, i2cbus->adapter.name, i2cbus->slave_addr);
+			  id, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 
 	if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) {
 		DRM_DEBUG("tfp410 not detected got DID %X: from %s Slave %d.\n",
-			  id, i2cbus->adapter.name, i2cbus->slave_addr);
+			  id, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 	tfp->quiet = false;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index f112c769d53..50d1f782768 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -846,7 +846,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 		return 0;
 	}
 
-	printk(KERN_DEBUG "set status page addr 0x%08x\n", (u32)hws->addr);
+	DRM_DEBUG("set status page addr 0x%08x\n", (u32)hws->addr);
 
 	dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12);
 
@@ -885,8 +885,8 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
  * some RAM for the framebuffer at early boot.  This code figures out
  * how much was set aside so we can use it for our own purposes.
  */
-static int i915_probe_agp(struct drm_device *dev, unsigned long *aperture_size,
-			  unsigned long *preallocated_size)
+static int i915_probe_agp(struct drm_device *dev, uint32_t *aperture_size,
+			  uint32_t *preallocated_size)
 {
 	struct pci_dev *bridge_dev;
 	u16 tmp = 0;
@@ -984,10 +984,11 @@ static int i915_probe_agp(struct drm_device *dev, unsigned long *aperture_size,
 	return 0;
 }
 
-static int i915_load_modeset_init(struct drm_device *dev)
+static int i915_load_modeset_init(struct drm_device *dev,
+				  unsigned long prealloc_size,
+				  unsigned long agp_size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long agp_size, prealloc_size;
 	int fb_bar = IS_I9XX(dev) ? 2 : 0;
 	int ret = 0;
 
@@ -1002,10 +1003,6 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	if (IS_I965G(dev) || IS_G33(dev))
 		dev_priv->cursor_needs_physical = false;
 
-	ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
-	if (ret)
-		goto out;
-
 	/* Basic memrange allocator for stolen space (aka vram) */
 	drm_mm_init(&dev_priv->vram, 0, prealloc_size);
 
@@ -1082,6 +1079,44 @@ void i915_master_destroy(struct drm_device *dev, struct drm_master *master)
 	master->driver_priv = NULL;
 }
 
+static void i915_get_mem_freq(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 tmp;
+
+	if (!IS_IGD(dev))
+		return;
+
+	tmp = I915_READ(CLKCFG);
+
+	switch (tmp & CLKCFG_FSB_MASK) {
+	case CLKCFG_FSB_533:
+		dev_priv->fsb_freq = 533; /* 133*4 */
+		break;
+	case CLKCFG_FSB_800:
+		dev_priv->fsb_freq = 800; /* 200*4 */
+		break;
+	case CLKCFG_FSB_667:
+		dev_priv->fsb_freq =  667; /* 167*4 */
+		break;
+	case CLKCFG_FSB_400:
+		dev_priv->fsb_freq = 400; /* 100*4 */
+		break;
+	}
+
+	switch (tmp & CLKCFG_MEM_MASK) {
+	case CLKCFG_MEM_533:
+		dev_priv->mem_freq = 533;
+		break;
+	case CLKCFG_MEM_667:
+		dev_priv->mem_freq = 667;
+		break;
+	case CLKCFG_MEM_800:
+		dev_priv->mem_freq = 800;
+		break;
+	}
+}
+
 /**
  * i915_driver_load - setup chip and create an initial config
  * @dev: DRM device
@@ -1098,6 +1133,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	resource_size_t base, size;
 	int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1;
+	uint32_t agp_size, prealloc_size;
 
 	/* i915 has 4 more counters */
 	dev->counters += 4;
@@ -1146,9 +1182,29 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 			 "performance may suffer.\n");
 	}
 
+	ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
+	if (ret)
+		goto out_iomapfree;
+
+	dev_priv->wq = create_workqueue("i915");
+	if (dev_priv->wq == NULL) {
+		DRM_ERROR("Failed to create our workqueue.\n");
+		ret = -ENOMEM;
+		goto out_iomapfree;
+	}
+
 	/* enable GEM by default */
 	dev_priv->has_gem = 1;
 
+	if (prealloc_size > agp_size * 3 / 4) {
+		DRM_ERROR("Detected broken video BIOS with %d/%dkB of video "
+			  "memory stolen.\n",
+			  prealloc_size / 1024, agp_size / 1024);
+		DRM_ERROR("Disabling GEM. (try reducing stolen memory or "
+			  "updating the BIOS to fix).\n");
+		dev_priv->has_gem = 0;
+	}
+
 	dev->driver->get_vblank_counter = i915_get_vblank_counter;
 	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
 	if (IS_G4X(dev) || IS_IGDNG(dev)) {
@@ -1162,9 +1218,11 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	if (!I915_NEED_GFX_HWS(dev)) {
 		ret = i915_init_phys_hws(dev);
 		if (ret != 0)
-			goto out_iomapfree;
+			goto out_workqueue_free;
 	}
 
+	i915_get_mem_freq(dev);
+
 	/* On the 945G/GM, the chipset reports the MSI capability on the
 	 * integrated graphics even though the support isn't actually there
 	 * according to the published specs.  It doesn't appear to function
@@ -1180,6 +1238,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 		pci_enable_msi(dev->pdev);
 
 	spin_lock_init(&dev_priv->user_irq_lock);
+	spin_lock_init(&dev_priv->error_lock);
 	dev_priv->user_irq_refcount = 0;
 
 	ret = drm_vblank_init(dev, I915_NUM_PIPE);
@@ -1190,10 +1249,10 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	}
 
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
-		ret = i915_load_modeset_init(dev);
+		ret = i915_load_modeset_init(dev, prealloc_size, agp_size);
 		if (ret < 0) {
 			DRM_ERROR("failed to init modeset\n");
-			goto out_rmmap;
+			goto out_workqueue_free;
 		}
 	}
 
@@ -1204,6 +1263,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
 	return 0;
 
+out_workqueue_free:
+	destroy_workqueue(dev_priv->wq);
 out_iomapfree:
 	io_mapping_free(dev_priv->mm.gtt_mapping);
 out_rmmap:
@@ -1217,6 +1278,8 @@ int i915_driver_unload(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
+	destroy_workqueue(dev_priv->wq);
+
 	io_mapping_free(dev_priv->mm.gtt_mapping);
 	if (dev_priv->mm.gtt_mtrr >= 0) {
 		mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base,
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 98560e1e899..fc4b68aa2d0 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -35,6 +35,7 @@
 
 #include "drm_pciids.h"
 #include <linux/console.h>
+#include "drm_crtc_helper.h"
 
 static unsigned int i915_modeset = -1;
 module_param_named(modeset, i915_modeset, int, 0400);
@@ -57,8 +58,8 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	if (!dev || !dev_priv) {
-		printk(KERN_ERR "dev: %p, dev_priv: %p\n", dev, dev_priv);
-		printk(KERN_ERR "DRM not initialized, aborting suspend.\n");
+		DRM_ERROR("dev: %p, dev_priv: %p\n", dev, dev_priv);
+		DRM_ERROR("DRM not initialized, aborting suspend.\n");
 		return -ENODEV;
 	}
 
@@ -67,8 +68,6 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state)
 
 	pci_save_state(dev->pdev);
 
-	i915_save_state(dev);
-
 	/* If KMS is active, we do the leavevt stuff here */
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 		if (i915_gem_idle(dev))
@@ -77,6 +76,8 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state)
 		drm_irq_uninstall(dev);
 	}
 
+	i915_save_state(dev);
+
 	intel_opregion_free(dev, 1);
 
 	if (state.event == PM_EVENT_SUSPEND) {
@@ -115,6 +116,10 @@ static int i915_resume(struct drm_device *dev)
 
 		drm_irq_install(dev);
 	}
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		/* Resume the modeset for every activated CRTC */
+		drm_helper_resume_force_mode(dev);
+	}
 
 	return ret;
 }
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7a84f04e843..5b4f87e5562 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -133,6 +133,22 @@ struct sdvo_device_mapping {
 	u8 initialized;
 };
 
+struct drm_i915_error_state {
+	u32 eir;
+	u32 pgtbl_er;
+	u32 pipeastat;
+	u32 pipebstat;
+	u32 ipeir;
+	u32 ipehr;
+	u32 instdone;
+	u32 acthd;
+	u32 instpm;
+	u32 instps;
+	u32 instdone1;
+	u32 seqno;
+	struct timeval time;
+};
+
 typedef struct drm_i915_private {
 	struct drm_device *dev;
 
@@ -203,12 +219,21 @@ typedef struct drm_i915_private {
 	unsigned int lvds_vbt:1;
 	unsigned int int_crt_support:1;
 	unsigned int lvds_use_ssc:1;
+	unsigned int edp_support:1;
 	int lvds_ssc_freq;
 
+	int crt_ddc_bus; /* -1 = unknown, else GPIO to use for CRT DDC */
 	struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
 	int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
 	int num_fence_regs; /* 8 on pre-965, 16 otherwise */
 
+	unsigned int fsb_freq, mem_freq;
+
+	spinlock_t error_lock;
+	struct drm_i915_error_state *first_error;
+	struct work_struct error_work;
+	struct workqueue_struct *wq;
+
 	/* Register state */
 	u8 saveLBB;
 	u32 saveDSPACNTR;
@@ -306,6 +331,17 @@ typedef struct drm_i915_private {
 	u32 saveCURBPOS;
 	u32 saveCURBBASE;
 	u32 saveCURSIZE;
+	u32 saveDP_B;
+	u32 saveDP_C;
+	u32 saveDP_D;
+	u32 savePIPEA_GMCH_DATA_M;
+	u32 savePIPEB_GMCH_DATA_M;
+	u32 savePIPEA_GMCH_DATA_N;
+	u32 savePIPEB_GMCH_DATA_N;
+	u32 savePIPEA_DP_LINK_M;
+	u32 savePIPEB_DP_LINK_M;
+	u32 savePIPEA_DP_LINK_N;
+	u32 savePIPEB_DP_LINK_N;
 
 	struct {
 		struct drm_mm gtt_space;
@@ -349,6 +385,9 @@ typedef struct drm_i915_private {
 		 */
 		struct list_head inactive_list;
 
+		/** LRU list of objects with fence regs on them. */
+		struct list_head fence_list;
+
 		/**
 		 * List of breadcrumbs associated with GPU requests currently
 		 * outstanding.
@@ -416,6 +455,9 @@ struct drm_i915_gem_object {
 	/** This object's place on the active/flushing/inactive lists */
 	struct list_head list;
 
+	/** This object's place on the fenced object LRU */
+	struct list_head fence_list;
+
 	/**
 	 * This is set if the object is on the active or flushing lists
 	 * (has pending rendering), and is not set if it's on inactive (ready
@@ -457,9 +499,6 @@ struct drm_i915_gem_object {
 	 */
 	int fence_reg;
 
-	/** Boolean whether this object has a valid gtt offset. */
-	int gtt_bound;
-
 	/** How many users have pinned this object in GTT space */
 	int pin_count;
 
@@ -644,6 +683,7 @@ void i915_gem_free_object(struct drm_gem_object *obj);
 int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment);
 void i915_gem_object_unpin(struct drm_gem_object *obj);
 int i915_gem_object_unbind(struct drm_gem_object *obj);
+void i915_gem_release_mmap(struct drm_gem_object *obj);
 void i915_gem_lastclose(struct drm_device *dev);
 uint32_t i915_get_gem_seqno(struct drm_device *dev);
 int i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
@@ -857,7 +897,11 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \
 						      IS_I915GM(dev)))
 #define SUPPORTS_INTEGRATED_HDMI(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
+#define SUPPORTS_INTEGRATED_DP(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
+#define SUPPORTS_EDP(dev)		(IS_IGDNG_M(dev))
 #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
+/* dsparb controlled by hw only */
+#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IGDNG(dev))
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
 
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index fd2b8bdffe3..80e5ba490dc 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -978,6 +978,7 @@ int
 i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
 			  struct drm_file *file_priv)
 {
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_gem_set_domain *args = data;
 	struct drm_gem_object *obj;
 	uint32_t read_domains = args->read_domains;
@@ -1006,12 +1007,22 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
 
 	mutex_lock(&dev->struct_mutex);
 #if WATCH_BUF
-	DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n",
+	DRM_INFO("set_domain_ioctl %p(%zd), %08x %08x\n",
 		 obj, obj->size, read_domains, write_domain);
 #endif
 	if (read_domains & I915_GEM_DOMAIN_GTT) {
+		struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
 		ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0);
 
+		/* Update the LRU on the fence for the CPU access that's
+		 * about to occur.
+		 */
+		if (obj_priv->fence_reg != I915_FENCE_REG_NONE) {
+			list_move_tail(&obj_priv->fence_list,
+				       &dev_priv->mm.fence_list);
+		}
+
 		/* Silently promote "you're not bound, there was nothing to do"
 		 * to success, since the client was just asking us to
 		 * make sure everything was done.
@@ -1050,7 +1061,7 @@ i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data,
 	}
 
 #if WATCH_BUF
-	DRM_INFO("%s: sw_finish %d (%p %d)\n",
+	DRM_INFO("%s: sw_finish %d (%p %zd)\n",
 		 __func__, args->handle, obj, obj->size);
 #endif
 	obj_priv = obj->driver_private;
@@ -1155,8 +1166,7 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	}
 
 	/* Need a new fence register? */
-	if (obj_priv->fence_reg == I915_FENCE_REG_NONE &&
-	    obj_priv->tiling_mode != I915_TILING_NONE) {
+	if (obj_priv->tiling_mode != I915_TILING_NONE) {
 		ret = i915_gem_object_get_fence_reg(obj);
 		if (ret) {
 			mutex_unlock(&dev->struct_mutex);
@@ -1252,6 +1262,31 @@ out_free_list:
 	return ret;
 }
 
+/**
+ * i915_gem_release_mmap - remove physical page mappings
+ * @obj: obj in question
+ *
+ * Preserve the reservation of the mmaping with the DRM core code, but
+ * relinquish ownership of the pages back to the system.
+ *
+ * It is vital that we remove the page mapping if we have mapped a tiled
+ * object through the GTT and then lose the fence register due to
+ * resource pressure. Similarly if the object has been moved out of the
+ * aperture, than pages mapped into userspace must be revoked. Removing the
+ * mapping will then trigger a page fault on the next user access, allowing
+ * fixup by i915_gem_fault().
+ */
+void
+i915_gem_release_mmap(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+	if (dev->dev_mapping)
+		unmap_mapping_range(dev->dev_mapping,
+				    obj_priv->mmap_offset, obj->size, 1);
+}
+
 static void
 i915_gem_free_mmap_offset(struct drm_gem_object *obj)
 {
@@ -1545,7 +1580,7 @@ i915_add_request(struct drm_device *dev, struct drm_file *file_priv,
 	}
 
 	if (was_empty && !dev_priv->mm.suspended)
-		schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
+		queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
 	return seqno;
 }
 
@@ -1694,7 +1729,7 @@ i915_gem_retire_work_handler(struct work_struct *work)
 	i915_gem_retire_requests(dev);
 	if (!dev_priv->mm.suspended &&
 	    !list_empty(&dev_priv->mm.request_list))
-		schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
+		queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
 	mutex_unlock(&dev->struct_mutex);
 }
 
@@ -1861,7 +1896,6 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
 {
 	struct drm_device *dev = obj->dev;
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
-	loff_t offset;
 	int ret = 0;
 
 #if WATCH_BUF
@@ -1898,9 +1932,7 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
 	BUG_ON(obj_priv->active);
 
 	/* blow away mappings if mapped through GTT */
-	offset = ((loff_t) obj->map_list.hash.key) << PAGE_SHIFT;
-	if (dev->dev_mapping)
-		unmap_mapping_range(dev->dev_mapping, offset, obj->size, 1);
+	i915_gem_release_mmap(obj);
 
 	if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
 		i915_gem_clear_fence_reg(obj);
@@ -2186,6 +2218,12 @@ i915_gem_object_get_fence_reg(struct drm_gem_object *obj)
 	struct drm_i915_gem_object *old_obj_priv = NULL;
 	int i, ret, avail;
 
+	/* Just update our place in the LRU if our fence is getting used. */
+	if (obj_priv->fence_reg != I915_FENCE_REG_NONE) {
+		list_move_tail(&obj_priv->fence_list, &dev_priv->mm.fence_list);
+		return 0;
+	}
+
 	switch (obj_priv->tiling_mode) {
 	case I915_TILING_NONE:
 		WARN(1, "allocating a fence for non-tiled object?\n");
@@ -2207,7 +2245,6 @@ i915_gem_object_get_fence_reg(struct drm_gem_object *obj)
 	}
 
 	/* First try to find a free reg */
-try_again:
 	avail = 0;
 	for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
 		reg = &dev_priv->fence_regs[i];
@@ -2221,67 +2258,62 @@ try_again:
 
 	/* None available, try to steal one or wait for a user to finish */
 	if (i == dev_priv->num_fence_regs) {
-		uint32_t seqno = dev_priv->mm.next_gem_seqno;
-		loff_t offset;
+		struct drm_gem_object *old_obj = NULL;
 
 		if (avail == 0)
 			return -ENOSPC;
 
-		for (i = dev_priv->fence_reg_start;
-		     i < dev_priv->num_fence_regs; i++) {
-			uint32_t this_seqno;
-
-			reg = &dev_priv->fence_regs[i];
-			old_obj_priv = reg->obj->driver_private;
+		list_for_each_entry(old_obj_priv, &dev_priv->mm.fence_list,
+				    fence_list) {
+			old_obj = old_obj_priv->obj;
 
 			if (old_obj_priv->pin_count)
 				continue;
 
+			/* Take a reference, as otherwise the wait_rendering
+			 * below may cause the object to get freed out from
+			 * under us.
+			 */
+			drm_gem_object_reference(old_obj);
+
 			/* i915 uses fences for GPU access to tiled buffers */
 			if (IS_I965G(dev) || !old_obj_priv->active)
 				break;
 
-			/* find the seqno of the first available fence */
-			this_seqno = old_obj_priv->last_rendering_seqno;
-			if (this_seqno != 0 &&
-			    reg->obj->write_domain == 0 &&
-			    i915_seqno_passed(seqno, this_seqno))
-				seqno = this_seqno;
-		}
-
-		/*
-		 * Now things get ugly... we have to wait for one of the
-		 * objects to finish before trying again.
-		 */
-		if (i == dev_priv->num_fence_regs) {
-			if (seqno == dev_priv->mm.next_gem_seqno) {
-				i915_gem_flush(dev,
-					       I915_GEM_GPU_DOMAINS,
-					       I915_GEM_GPU_DOMAINS);
-				seqno = i915_add_request(dev, NULL,
-							 I915_GEM_GPU_DOMAINS);
-				if (seqno == 0)
-					return -ENOMEM;
+			/* This brings the object to the head of the LRU if it
+			 * had been written to.  The only way this should
+			 * result in us waiting longer than the expected
+			 * optimal amount of time is if there was a
+			 * fence-using buffer later that was read-only.
+			 */
+			i915_gem_object_flush_gpu_write_domain(old_obj);
+			ret = i915_gem_object_wait_rendering(old_obj);
+			if (ret != 0) {
+				drm_gem_object_unreference(old_obj);
+				return ret;
 			}
 
-			ret = i915_wait_request(dev, seqno);
-			if (ret)
-				return ret;
-			goto try_again;
+			break;
 		}
 
 		/*
 		 * Zap this virtual mapping so we can set up a fence again
 		 * for this object next time we need it.
 		 */
-		offset = ((loff_t) reg->obj->map_list.hash.key) << PAGE_SHIFT;
-		if (dev->dev_mapping)
-			unmap_mapping_range(dev->dev_mapping, offset,
-					    reg->obj->size, 1);
+		i915_gem_release_mmap(old_obj);
+
+		i = old_obj_priv->fence_reg;
+		reg = &dev_priv->fence_regs[i];
+
 		old_obj_priv->fence_reg = I915_FENCE_REG_NONE;
+		list_del_init(&old_obj_priv->fence_list);
+
+		drm_gem_object_unreference(old_obj);
 	}
 
 	obj_priv->fence_reg = i;
+	list_add_tail(&obj_priv->fence_list, &dev_priv->mm.fence_list);
+
 	reg->obj = obj;
 
 	if (IS_I965G(dev))
@@ -2324,6 +2356,7 @@ i915_gem_clear_fence_reg(struct drm_gem_object *obj)
 
 	dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL;
 	obj_priv->fence_reg = I915_FENCE_REG_NONE;
+	list_del_init(&obj_priv->fence_list);
 }
 
 /**
@@ -2423,7 +2456,7 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment)
 	}
 
 #if WATCH_BUF
-	DRM_INFO("Binding object of size %d at 0x%08x\n",
+	DRM_INFO("Binding object of size %zd at 0x%08x\n",
 		 obj->size, obj_priv->gtt_offset);
 #endif
 	ret = i915_gem_object_get_pages(obj);
@@ -3577,9 +3610,7 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
 	 * Pre-965 chips need a fence register set up in order to
 	 * properly handle tiled surfaces.
 	 */
-	if (!IS_I965G(dev) &&
-	    obj_priv->fence_reg == I915_FENCE_REG_NONE &&
-	    obj_priv->tiling_mode != I915_TILING_NONE) {
+	if (!IS_I965G(dev) && obj_priv->tiling_mode != I915_TILING_NONE) {
 		ret = i915_gem_object_get_fence_reg(obj);
 		if (ret != 0) {
 			if (ret != -EBUSY && ret != -ERESTARTSYS)
@@ -3788,6 +3819,7 @@ int i915_gem_init_object(struct drm_gem_object *obj)
 	obj_priv->obj = obj;
 	obj_priv->fence_reg = I915_FENCE_REG_NONE;
 	INIT_LIST_HEAD(&obj_priv->list);
+	INIT_LIST_HEAD(&obj_priv->fence_list);
 
 	return 0;
 }
@@ -4200,15 +4232,11 @@ int
 i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
 		       struct drm_file *file_priv)
 {
-	int ret;
-
 	if (drm_core_check_feature(dev, DRIVER_MODESET))
 		return 0;
 
-	ret = i915_gem_idle(dev);
 	drm_irq_uninstall(dev);
-
-	return ret;
+	return i915_gem_idle(dev);
 }
 
 void
@@ -4227,6 +4255,7 @@ i915_gem_lastclose(struct drm_device *dev)
 void
 i915_gem_load(struct drm_device *dev)
 {
+	int i;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 
 	spin_lock_init(&dev_priv->mm.active_list_lock);
@@ -4234,6 +4263,7 @@ i915_gem_load(struct drm_device *dev)
 	INIT_LIST_HEAD(&dev_priv->mm.flushing_list);
 	INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
 	INIT_LIST_HEAD(&dev_priv->mm.request_list);
+	INIT_LIST_HEAD(&dev_priv->mm.fence_list);
 	INIT_DELAYED_WORK(&dev_priv->mm.retire_work,
 			  i915_gem_retire_work_handler);
 	dev_priv->mm.next_gem_seqno = 1;
@@ -4246,6 +4276,18 @@ i915_gem_load(struct drm_device *dev)
 	else
 		dev_priv->num_fence_regs = 8;
 
+	/* Initialize fence registers to zero */
+	if (IS_I965G(dev)) {
+		for (i = 0; i < 16; i++)
+			I915_WRITE64(FENCE_REG_965_0 + (i * 8), 0);
+	} else {
+		for (i = 0; i < 8; i++)
+			I915_WRITE(FENCE_REG_830_0 + (i * 4), 0);
+		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+			for (i = 0; i < 8; i++)
+				I915_WRITE(FENCE_REG_945_8 + (i * 4), 0);
+	}
+
 	i915_gem_detect_bit_6_swizzle(dev);
 }
 
diff --git a/drivers/gpu/drm/i915/i915_gem_debug.c b/drivers/gpu/drm/i915/i915_gem_debug.c
index 8d0b943e2c5..e602614bd3f 100644
--- a/drivers/gpu/drm/i915/i915_gem_debug.c
+++ b/drivers/gpu/drm/i915/i915_gem_debug.c
@@ -87,7 +87,7 @@ i915_gem_dump_object(struct drm_gem_object *obj, int len,
 			chunk_len = page_len - chunk;
 			if (chunk_len > 128)
 				chunk_len = 128;
-			i915_gem_dump_page(obj_priv->page_list[page],
+			i915_gem_dump_page(obj_priv->pages[page],
 					   chunk, chunk + chunk_len,
 					   obj_priv->gtt_offset +
 					   page * PAGE_SIZE,
@@ -143,7 +143,7 @@ i915_gem_object_check_coherency(struct drm_gem_object *obj, int handle)
 	uint32_t *backing_map = NULL;
 	int bad_count = 0;
 
-	DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %dkb):\n",
+	DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %zdkb):\n",
 		 __func__, obj, obj_priv->gtt_offset, handle,
 		 obj->size / 1024);
 
@@ -157,7 +157,7 @@ i915_gem_object_check_coherency(struct drm_gem_object *obj, int handle)
 	for (page = 0; page < obj->size / PAGE_SIZE; page++) {
 		int i;
 
-		backing_map = kmap_atomic(obj_priv->page_list[page], KM_USER0);
+		backing_map = kmap_atomic(obj_priv->pages[page], KM_USER0);
 
 		if (backing_map == NULL) {
 			DRM_ERROR("failed to map backing page\n");
diff --git a/drivers/gpu/drm/i915/i915_gem_debugfs.c b/drivers/gpu/drm/i915/i915_gem_debugfs.c
index 28146e405e8..cb3b97405fb 100644
--- a/drivers/gpu/drm/i915/i915_gem_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_gem_debugfs.c
@@ -75,11 +75,10 @@ static int i915_gem_object_list_info(struct seq_file *m, void *data)
 	case ACTIVE_LIST:
 		seq_printf(m, "Active:\n");
 		lock = &dev_priv->mm.active_list_lock;
-		spin_lock(lock);
 		head = &dev_priv->mm.active_list;
 		break;
 	case INACTIVE_LIST:
-		seq_printf(m, "Inctive:\n");
+		seq_printf(m, "Inactive:\n");
 		head = &dev_priv->mm.inactive_list;
 		break;
 	case FLUSHING_LIST:
@@ -91,6 +90,8 @@ static int i915_gem_object_list_info(struct seq_file *m, void *data)
 		return 0;
 	}
 
+	if (lock)
+		spin_lock(lock);
 	list_for_each_entry(obj_priv, head, list)
 	{
 		struct drm_gem_object *obj = obj_priv->obj;
@@ -104,7 +105,10 @@ static int i915_gem_object_list_info(struct seq_file *m, void *data)
 		if (obj->name)
 			seq_printf(m, " (name: %d)", obj->name);
 		if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
-			seq_printf(m, " (fence: %d)\n", obj_priv->fence_reg);
+			seq_printf(m, " (fence: %d)", obj_priv->fence_reg);
+		if (obj_priv->gtt_space != NULL)
+			seq_printf(m, " (gtt_offset: %08x)", obj_priv->gtt_offset);
+
 		seq_printf(m, "\n");
 	}
 
@@ -323,6 +327,41 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data)
 	return 0;
 }
 
+static int i915_error_state(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_error_state *error;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev_priv->error_lock, flags);
+	if (!dev_priv->first_error) {
+		seq_printf(m, "no error state collected\n");
+		goto out;
+	}
+
+	error = dev_priv->first_error;
+
+	seq_printf(m, "Time: %ld s %ld us\n", error->time.tv_sec,
+		   error->time.tv_usec);
+	seq_printf(m, "EIR: 0x%08x\n", error->eir);
+	seq_printf(m, "  PGTBL_ER: 0x%08x\n", error->pgtbl_er);
+	seq_printf(m, "  INSTPM: 0x%08x\n", error->instpm);
+	seq_printf(m, "  IPEIR: 0x%08x\n", error->ipeir);
+	seq_printf(m, "  IPEHR: 0x%08x\n", error->ipehr);
+	seq_printf(m, "  INSTDONE: 0x%08x\n", error->instdone);
+	seq_printf(m, "  ACTHD: 0x%08x\n", error->acthd);
+	if (IS_I965G(dev)) {
+		seq_printf(m, "  INSTPS: 0x%08x\n", error->instps);
+		seq_printf(m, "  INSTDONE1: 0x%08x\n", error->instdone1);
+	}
+
+out:
+	spin_unlock_irqrestore(&dev_priv->error_lock, flags);
+
+	return 0;
+}
 
 static struct drm_info_list i915_gem_debugfs_list[] = {
 	{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
@@ -336,6 +375,7 @@ static struct drm_info_list i915_gem_debugfs_list[] = {
 	{"i915_ringbuffer_data", i915_ringbuffer_data, 0},
 	{"i915_ringbuffer_info", i915_ringbuffer_info, 0},
 	{"i915_batchbuffers", i915_batchbuffer_info, 0},
+	{"i915_error_state", i915_error_state, 0},
 };
 #define I915_GEM_DEBUGFS_ENTRIES ARRAY_SIZE(i915_gem_debugfs_list)
 
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 5c1ceec49f5..a2d527b22ec 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -114,11 +114,13 @@ intel_alloc_mchbar_resource(struct drm_device *dev)
 	mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
 
 	/* If ACPI doesn't have it, assume we need to allocate it ourselves */
+#ifdef CONFIG_PNP
 	if (mchbar_addr &&
 	    pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) {
 		ret = 0;
 		goto out_put;
 	}
+#endif
 
 	/* Get some space for it */
 	ret = pci_bus_alloc_resource(bridge_dev->bus, &dev_priv->mch_res,
@@ -519,6 +521,12 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
 			goto err;
 		}
 
+		/* If we've changed tiling, GTT-mappings of the object
+		 * need to re-fault to ensure that the correct fence register
+		 * setup is in place.
+		 */
+		i915_gem_release_mmap(obj);
+
 		obj_priv->tiling_mode = args->tiling_mode;
 		obj_priv->stride = args->stride;
 	}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index b86b7b7130c..7ebc84c2881 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -26,6 +26,7 @@
  *
  */
 
+#include <linux/sysrq.h>
 #include "drmP.h"
 #include "drm.h"
 #include "i915_drm.h"
@@ -41,9 +42,10 @@
  * we leave them always unmasked in IMR and then control enabling them through
  * PIPESTAT alone.
  */
-#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
-				   I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |  \
-				   I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT |		 \
+				   I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
+				   I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | \
+				   I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
 
 /** Interrupts that we mask and unmask at runtime. */
 #define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
@@ -188,7 +190,7 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
 	low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL;
 
 	if (!i915_pipe_enabled(dev, pipe)) {
-		DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
+		DRM_DEBUG("trying to get vblank count for disabled pipe %d\n", pipe);
 		return 0;
 	}
 
@@ -217,7 +219,7 @@ u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
 	int reg = pipe ? PIPEB_FRMCOUNT_GM45 : PIPEA_FRMCOUNT_GM45;
 
 	if (!i915_pipe_enabled(dev, pipe)) {
-		DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
+		DRM_DEBUG("trying to get vblank count for disabled pipe %d\n", pipe);
 		return 0;
 	}
 
@@ -232,7 +234,17 @@ static void i915_hotplug_work_func(struct work_struct *work)
 	drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
 						    hotplug_work);
 	struct drm_device *dev = dev_priv->dev;
-
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_connector *connector;
+
+	if (mode_config->num_connector) {
+		list_for_each_entry(connector, &mode_config->connector_list, head) {
+			struct intel_output *intel_output = to_intel_output(connector);
+	
+			if (intel_output->hot_plug)
+				(*intel_output->hot_plug) (intel_output);
+		}
+	}
 	/* Just fire off a uevent and let userspace tell us what to do */
 	drm_sysfs_hotplug_event(dev);
 }
@@ -278,6 +290,201 @@ irqreturn_t igdng_irq_handler(struct drm_device *dev)
 	return ret;
 }
 
+/**
+ * i915_error_work_func - do process context error handling work
+ * @work: work struct
+ *
+ * Fire an error uevent so userspace can see that a hang or error
+ * was detected.
+ */
+static void i915_error_work_func(struct work_struct *work)
+{
+	drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
+						    error_work);
+	struct drm_device *dev = dev_priv->dev;
+	char *event_string = "ERROR=1";
+	char *envp[] = { event_string, NULL };
+
+	DRM_DEBUG("generating error event\n");
+
+	kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, envp);
+}
+
+/**
+ * i915_capture_error_state - capture an error record for later analysis
+ * @dev: drm device
+ *
+ * Should be called when an error is detected (either a hang or an error
+ * interrupt) to capture error state from the time of the error.  Fills
+ * out a structure which becomes available in debugfs for user level tools
+ * to pick up.
+ */
+static void i915_capture_error_state(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_error_state *error;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev_priv->error_lock, flags);
+	if (dev_priv->first_error)
+		goto out;
+
+	error = kmalloc(sizeof(*error), GFP_ATOMIC);
+	if (!error) {
+		DRM_DEBUG("out ot memory, not capturing error state\n");
+		goto out;
+	}
+
+	error->eir = I915_READ(EIR);
+	error->pgtbl_er = I915_READ(PGTBL_ER);
+	error->pipeastat = I915_READ(PIPEASTAT);
+	error->pipebstat = I915_READ(PIPEBSTAT);
+	error->instpm = I915_READ(INSTPM);
+	if (!IS_I965G(dev)) {
+		error->ipeir = I915_READ(IPEIR);
+		error->ipehr = I915_READ(IPEHR);
+		error->instdone = I915_READ(INSTDONE);
+		error->acthd = I915_READ(ACTHD);
+	} else {
+		error->ipeir = I915_READ(IPEIR_I965);
+		error->ipehr = I915_READ(IPEHR_I965);
+		error->instdone = I915_READ(INSTDONE_I965);
+		error->instps = I915_READ(INSTPS);
+		error->instdone1 = I915_READ(INSTDONE1);
+		error->acthd = I915_READ(ACTHD_I965);
+	}
+
+	do_gettimeofday(&error->time);
+
+	dev_priv->first_error = error;
+
+out:
+	spin_unlock_irqrestore(&dev_priv->error_lock, flags);
+}
+
+/**
+ * i915_handle_error - handle an error interrupt
+ * @dev: drm device
+ *
+ * Do some basic checking of regsiter state at error interrupt time and
+ * dump it to the syslog.  Also call i915_capture_error_state() to make
+ * sure we get a record and make it available in debugfs.  Fire a uevent
+ * so userspace knows something bad happened (should trigger collection
+ * of a ring dump etc.).
+ */
+static void i915_handle_error(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 eir = I915_READ(EIR);
+	u32 pipea_stats = I915_READ(PIPEASTAT);
+	u32 pipeb_stats = I915_READ(PIPEBSTAT);
+
+	i915_capture_error_state(dev);
+
+	printk(KERN_ERR "render error detected, EIR: 0x%08x\n",
+	       eir);
+
+	if (IS_G4X(dev)) {
+		if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) {
+			u32 ipeir = I915_READ(IPEIR_I965);
+
+			printk(KERN_ERR "  IPEIR: 0x%08x\n",
+			       I915_READ(IPEIR_I965));
+			printk(KERN_ERR "  IPEHR: 0x%08x\n",
+			       I915_READ(IPEHR_I965));
+			printk(KERN_ERR "  INSTDONE: 0x%08x\n",
+			       I915_READ(INSTDONE_I965));
+			printk(KERN_ERR "  INSTPS: 0x%08x\n",
+			       I915_READ(INSTPS));
+			printk(KERN_ERR "  INSTDONE1: 0x%08x\n",
+			       I915_READ(INSTDONE1));
+			printk(KERN_ERR "  ACTHD: 0x%08x\n",
+			       I915_READ(ACTHD_I965));
+			I915_WRITE(IPEIR_I965, ipeir);
+			(void)I915_READ(IPEIR_I965);
+		}
+		if (eir & GM45_ERROR_PAGE_TABLE) {
+			u32 pgtbl_err = I915_READ(PGTBL_ER);
+			printk(KERN_ERR "page table error\n");
+			printk(KERN_ERR "  PGTBL_ER: 0x%08x\n",
+			       pgtbl_err);
+			I915_WRITE(PGTBL_ER, pgtbl_err);
+			(void)I915_READ(PGTBL_ER);
+		}
+	}
+
+	if (IS_I9XX(dev)) {
+		if (eir & I915_ERROR_PAGE_TABLE) {
+			u32 pgtbl_err = I915_READ(PGTBL_ER);
+			printk(KERN_ERR "page table error\n");
+			printk(KERN_ERR "  PGTBL_ER: 0x%08x\n",
+			       pgtbl_err);
+			I915_WRITE(PGTBL_ER, pgtbl_err);
+			(void)I915_READ(PGTBL_ER);
+		}
+	}
+
+	if (eir & I915_ERROR_MEMORY_REFRESH) {
+		printk(KERN_ERR "memory refresh error\n");
+		printk(KERN_ERR "PIPEASTAT: 0x%08x\n",
+		       pipea_stats);
+		printk(KERN_ERR "PIPEBSTAT: 0x%08x\n",
+		       pipeb_stats);
+		/* pipestat has already been acked */
+	}
+	if (eir & I915_ERROR_INSTRUCTION) {
+		printk(KERN_ERR "instruction error\n");
+		printk(KERN_ERR "  INSTPM: 0x%08x\n",
+		       I915_READ(INSTPM));
+		if (!IS_I965G(dev)) {
+			u32 ipeir = I915_READ(IPEIR);
+
+			printk(KERN_ERR "  IPEIR: 0x%08x\n",
+			       I915_READ(IPEIR));
+			printk(KERN_ERR "  IPEHR: 0x%08x\n",
+			       I915_READ(IPEHR));
+			printk(KERN_ERR "  INSTDONE: 0x%08x\n",
+			       I915_READ(INSTDONE));
+			printk(KERN_ERR "  ACTHD: 0x%08x\n",
+			       I915_READ(ACTHD));
+			I915_WRITE(IPEIR, ipeir);
+			(void)I915_READ(IPEIR);
+		} else {
+			u32 ipeir = I915_READ(IPEIR_I965);
+
+			printk(KERN_ERR "  IPEIR: 0x%08x\n",
+			       I915_READ(IPEIR_I965));
+			printk(KERN_ERR "  IPEHR: 0x%08x\n",
+			       I915_READ(IPEHR_I965));
+			printk(KERN_ERR "  INSTDONE: 0x%08x\n",
+			       I915_READ(INSTDONE_I965));
+			printk(KERN_ERR "  INSTPS: 0x%08x\n",
+			       I915_READ(INSTPS));
+			printk(KERN_ERR "  INSTDONE1: 0x%08x\n",
+			       I915_READ(INSTDONE1));
+			printk(KERN_ERR "  ACTHD: 0x%08x\n",
+			       I915_READ(ACTHD_I965));
+			I915_WRITE(IPEIR_I965, ipeir);
+			(void)I915_READ(IPEIR_I965);
+		}
+	}
+
+	I915_WRITE(EIR, eir);
+	(void)I915_READ(EIR);
+	eir = I915_READ(EIR);
+	if (eir) {
+		/*
+		 * some errors might have become stuck,
+		 * mask them.
+		 */
+		DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
+		I915_WRITE(EMR, I915_READ(EMR) | eir);
+		I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
+	}
+
+	queue_work(dev_priv->wq, &dev_priv->error_work);
+}
+
 irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 {
 	struct drm_device *dev = (struct drm_device *) arg;
@@ -319,15 +526,22 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 		pipea_stats = I915_READ(PIPEASTAT);
 		pipeb_stats = I915_READ(PIPEBSTAT);
 
+		if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
+			i915_handle_error(dev);
+
 		/*
 		 * Clear the PIPE(A|B)STAT regs before the IIR
 		 */
 		if (pipea_stats & 0x8000ffff) {
+			if (pipea_stats &  PIPE_FIFO_UNDERRUN_STATUS)
+				DRM_DEBUG("pipe a underrun\n");
 			I915_WRITE(PIPEASTAT, pipea_stats);
 			irq_received = 1;
 		}
 
 		if (pipeb_stats & 0x8000ffff) {
+			if (pipeb_stats &  PIPE_FIFO_UNDERRUN_STATUS)
+				DRM_DEBUG("pipe b underrun\n");
 			I915_WRITE(PIPEBSTAT, pipeb_stats);
 			irq_received = 1;
 		}
@@ -346,7 +560,8 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 			DRM_DEBUG("hotplug event received, stat 0x%08x\n",
 				  hotplug_status);
 			if (hotplug_status & dev_priv->hotplug_supported_mask)
-				schedule_work(&dev_priv->hotplug_work);
+				queue_work(dev_priv->wq,
+					   &dev_priv->hotplug_work);
 
 			I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
 			I915_READ(PORT_HOTPLUG_STAT);
@@ -699,6 +914,7 @@ void i915_driver_irq_preinstall(struct drm_device * dev)
 	atomic_set(&dev_priv->irq_received, 0);
 
 	INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
+	INIT_WORK(&dev_priv->error_work, i915_error_work_func);
 
 	if (IS_IGDNG(dev)) {
 		igdng_irq_preinstall(dev);
@@ -722,6 +938,7 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
+	u32 error_mask;
 
 	DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
 
@@ -758,6 +975,21 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 		i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT);
 	}
 
+	/*
+	 * Enable some error detection, note the instruction error mask
+	 * bit is reserved, so we leave it masked.
+	 */
+	if (IS_G4X(dev)) {
+		error_mask = ~(GM45_ERROR_PAGE_TABLE |
+			       GM45_ERROR_MEM_PRIV |
+			       GM45_ERROR_CP_PRIV |
+			       I915_ERROR_MEMORY_REFRESH);
+	} else {
+		error_mask = ~(I915_ERROR_PAGE_TABLE |
+			       I915_ERROR_MEMORY_REFRESH);
+	}
+	I915_WRITE(EMR, error_mask);
+
 	/* Disable pipe interrupt enables, clear pending pipe status */
 	I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
 	I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f6237a0b113..2955083aa47 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -206,6 +206,7 @@
 /*
  * Instruction and interrupt control regs
  */
+#define PGTBL_ER	0x02024
 #define PRB0_TAIL	0x02030
 #define PRB0_HEAD	0x02034
 #define PRB0_START	0x02038
@@ -226,11 +227,18 @@
 #define PRB1_HEAD	0x02044 /* 915+ only */
 #define PRB1_START	0x02048 /* 915+ only */
 #define PRB1_CTL	0x0204c /* 915+ only */
+#define IPEIR_I965	0x02064
+#define IPEHR_I965	0x02068
+#define INSTDONE_I965	0x0206c
+#define INSTPS		0x02070 /* 965+ only */
+#define INSTDONE1	0x0207c /* 965+ only */
 #define ACTHD_I965	0x02074
 #define HWS_PGA		0x02080
 #define HWS_ADDRESS_MASK	0xfffff000
 #define HWS_START_ADDRESS_SHIFT	4
 #define IPEIR		0x02088
+#define IPEHR		0x0208c
+#define INSTDONE	0x02090
 #define NOPID		0x02094
 #define HWSTAM		0x02098
 #define SCPD0		0x0209c /* 915+ only */
@@ -258,10 +266,22 @@
 #define EIR		0x020b0
 #define EMR		0x020b4
 #define ESR		0x020b8
+#define   GM45_ERROR_PAGE_TABLE				(1<<5)
+#define   GM45_ERROR_MEM_PRIV				(1<<4)
+#define   I915_ERROR_PAGE_TABLE				(1<<4)
+#define   GM45_ERROR_CP_PRIV				(1<<3)
+#define   I915_ERROR_MEMORY_REFRESH			(1<<1)
+#define   I915_ERROR_INSTRUCTION			(1<<0)
 #define INSTPM	        0x020c0
 #define ACTHD	        0x020c8
 #define FW_BLC		0x020d8
+#define FW_BLC2	 	0x020dc
 #define FW_BLC_SELF	0x020e0 /* 915+ only */
+#define   FW_BLC_SELF_EN (1<<15)
+#define MM_BURST_LENGTH     0x00700000
+#define MM_FIFO_WATERMARK   0x0001F000
+#define LM_BURST_LENGTH     0x00000700
+#define LM_FIFO_WATERMARK   0x0000001F
 #define MI_ARB_STATE	0x020e4 /* 915+ only */
 #define CACHE_MODE_0	0x02120 /* 915+ only */
 #define   CM0_MASK_SHIFT          16
@@ -569,6 +589,23 @@
 #define C0DRB3			0x10206
 #define C1DRB3			0x10606
 
+/* Clocking configuration register */
+#define CLKCFG			0x10c00
+#define CLKCFG_FSB_400					(5 << 0)	/* hrawclk 100 */
+#define CLKCFG_FSB_533					(1 << 0)	/* hrawclk 133 */
+#define CLKCFG_FSB_667					(3 << 0)	/* hrawclk 166 */
+#define CLKCFG_FSB_800					(2 << 0)	/* hrawclk 200 */
+#define CLKCFG_FSB_1067					(6 << 0)	/* hrawclk 266 */
+#define CLKCFG_FSB_1333					(7 << 0)	/* hrawclk 333 */
+/* Note, below two are guess */
+#define CLKCFG_FSB_1600					(4 << 0)	/* hrawclk 400 */
+#define CLKCFG_FSB_1600_ALT				(0 << 0)	/* hrawclk 400 */
+#define CLKCFG_FSB_MASK					(7 << 0)
+#define CLKCFG_MEM_533					(1 << 4)
+#define CLKCFG_MEM_667					(2 << 4)
+#define CLKCFG_MEM_800					(3 << 4)
+#define CLKCFG_MEM_MASK					(7 << 4)
+
 /** GM965 GM45 render standby register */
 #define MCHBAR_RENDER_STANDBY	0x111B8
 
@@ -834,9 +871,25 @@
 #define   HORIZ_INTERP_MASK	(3 << 6)
 #define   HORIZ_AUTO_SCALE	(1 << 5)
 #define   PANEL_8TO6_DITHER_ENABLE (1 << 3)
+#define   PFIT_FILTER_FUZZY	(0 << 24)
+#define   PFIT_SCALING_AUTO	(0 << 26)
+#define   PFIT_SCALING_PROGRAMMED (1 << 26)
+#define   PFIT_SCALING_PILLAR	(2 << 26)
+#define   PFIT_SCALING_LETTER	(3 << 26)
 #define PFIT_PGM_RATIOS	0x61234
 #define   PFIT_VERT_SCALE_MASK			0xfff00000
 #define   PFIT_HORIZ_SCALE_MASK			0x0000fff0
+/* Pre-965 */
+#define		PFIT_VERT_SCALE_SHIFT		20
+#define		PFIT_VERT_SCALE_MASK		0xfff00000
+#define		PFIT_HORIZ_SCALE_SHIFT		4
+#define		PFIT_HORIZ_SCALE_MASK		0x0000fff0
+/* 965+ */
+#define		PFIT_VERT_SCALE_SHIFT_965	16
+#define		PFIT_VERT_SCALE_MASK_965	0x1fff0000
+#define		PFIT_HORIZ_SCALE_SHIFT_965	0
+#define		PFIT_HORIZ_SCALE_MASK_965	0x00001fff
+
 #define PFIT_AUTO_RATIOS 0x61238
 
 /* Backlight control */
@@ -1342,6 +1395,7 @@
 #define TV_V_CHROMA_42		0x684a8
 
 /* Display Port */
+#define DP_A				0x64000 /* eDP */
 #define DP_B				0x64100
 #define DP_C				0x64200
 #define DP_D				0x64300
@@ -1384,13 +1438,22 @@
 /* Mystic DPCD version 1.1 special mode */
 #define   DP_ENHANCED_FRAMING		(1 << 18)
 
+/* eDP */
+#define   DP_PLL_FREQ_270MHZ		(0 << 16)
+#define   DP_PLL_FREQ_160MHZ		(1 << 16)
+#define   DP_PLL_FREQ_MASK		(3 << 16)
+
 /** locked once port is enabled */
 #define   DP_PORT_REVERSAL		(1 << 15)
 
+/* eDP */
+#define   DP_PLL_ENABLE			(1 << 14)
+
 /** sends the clock on lane 15 of the PEG for debug */
 #define   DP_CLOCK_OUTPUT_ENABLE	(1 << 13)
 
 #define   DP_SCRAMBLING_DISABLE		(1 << 12)
+#define   DP_SCRAMBLING_DISABLE_IGDNG	(1 << 7)
 
 /** limit RGB values to avoid confusing TVs */
 #define   DP_COLOR_RANGE_16_235		(1 << 8)
@@ -1410,6 +1473,13 @@
  * is 20 bytes in each direction, hence the 5 fixed
  * data registers
  */
+#define DPA_AUX_CH_CTL			0x64010
+#define DPA_AUX_CH_DATA1		0x64014
+#define DPA_AUX_CH_DATA2		0x64018
+#define DPA_AUX_CH_DATA3		0x6401c
+#define DPA_AUX_CH_DATA4		0x64020
+#define DPA_AUX_CH_DATA5		0x64024
+
 #define DPB_AUX_CH_CTL			0x64110
 #define DPB_AUX_CH_DATA1		0x64114
 #define DPB_AUX_CH_DATA2		0x64118
@@ -1552,6 +1622,34 @@
 #define   DSPARB_CSTART_SHIFT	7
 #define   DSPARB_BSTART_MASK	(0x7f)
 #define   DSPARB_BSTART_SHIFT	0
+#define   DSPARB_BEND_SHIFT	9 /* on 855 */
+#define   DSPARB_AEND_SHIFT	0
+
+#define DSPFW1			0x70034
+#define DSPFW2			0x70038
+#define DSPFW3			0x7003c
+#define   IGD_SELF_REFRESH_EN	(1<<30)
+
+/* FIFO watermark sizes etc */
+#define I915_FIFO_LINE_SIZE	64
+#define I830_FIFO_LINE_SIZE	32
+#define I945_FIFO_SIZE		127 /* 945 & 965 */
+#define I915_FIFO_SIZE		95
+#define I855GM_FIFO_SIZE	127 /* In cachelines */
+#define I830_FIFO_SIZE		95
+#define I915_MAX_WM		0x3f
+
+#define IGD_DISPLAY_FIFO	512 /* in 64byte unit */
+#define IGD_FIFO_LINE_SIZE	64
+#define IGD_MAX_WM		0x1ff
+#define IGD_DFT_WM		0x3f
+#define IGD_DFT_HPLLOFF_WM	0
+#define IGD_GUARD_WM		10
+#define IGD_CURSOR_FIFO		64
+#define IGD_CURSOR_MAX_WM	0x3f
+#define IGD_CURSOR_DFT_WM	0
+#define IGD_CURSOR_GUARD_WM	5
+
 /*
  * The two pipe frame counter registers are not synchronized, so
  * reading a stable value is somewhat tricky. The following code
@@ -1767,6 +1865,8 @@
 #define PFA_CTL_1               0x68080
 #define PFB_CTL_1               0x68880
 #define  PF_ENABLE              (1<<31)
+#define PFA_WIN_SZ		0x68074
+#define PFB_WIN_SZ		0x68874
 
 /* legacy palette */
 #define LGC_PALETTE_A           0x4a000
@@ -2127,4 +2227,28 @@
 #define PCH_PP_OFF_DELAYS	0xc720c
 #define PCH_PP_DIVISOR		0xc7210
 
+#define PCH_DP_B		0xe4100
+#define PCH_DPB_AUX_CH_CTL	0xe4110
+#define PCH_DPB_AUX_CH_DATA1	0xe4114
+#define PCH_DPB_AUX_CH_DATA2	0xe4118
+#define PCH_DPB_AUX_CH_DATA3	0xe411c
+#define PCH_DPB_AUX_CH_DATA4	0xe4120
+#define PCH_DPB_AUX_CH_DATA5	0xe4124
+
+#define PCH_DP_C		0xe4200
+#define PCH_DPC_AUX_CH_CTL	0xe4210
+#define PCH_DPC_AUX_CH_DATA1	0xe4214
+#define PCH_DPC_AUX_CH_DATA2	0xe4218
+#define PCH_DPC_AUX_CH_DATA3	0xe421c
+#define PCH_DPC_AUX_CH_DATA4	0xe4220
+#define PCH_DPC_AUX_CH_DATA5	0xe4224
+
+#define PCH_DP_D		0xe4300
+#define PCH_DPD_AUX_CH_CTL	0xe4310
+#define PCH_DPD_AUX_CH_DATA1	0xe4314
+#define PCH_DPD_AUX_CH_DATA2	0xe4318
+#define PCH_DPD_AUX_CH_DATA3	0xe431c
+#define PCH_DPD_AUX_CH_DATA4	0xe4320
+#define PCH_DPD_AUX_CH_DATA5	0xe4324
+
 #endif /* _I915_REG_H_ */
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index a98e2831ed3..1d04e1904ac 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -222,23 +222,12 @@ static void i915_restore_vga(struct drm_device *dev)
 	I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK);
 }
 
-int i915_save_state(struct drm_device *dev)
+static void i915_save_modeset_reg(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int i;
-
-	pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
-
-	/* Render Standby */
-	if (IS_I965G(dev) && IS_MOBILE(dev))
-		dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
-
-	/* Hardware status page */
-	dev_priv->saveHWS = I915_READ(HWS_PGA);
-
-	/* Display arbitration control */
-	dev_priv->saveDSPARB = I915_READ(DSPARB);
 
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		return;
 	/* Pipe & plane A info */
 	dev_priv->savePIPEACONF = I915_READ(PIPEACONF);
 	dev_priv->savePIPEASRC = I915_READ(PIPEASRC);
@@ -294,7 +283,122 @@ int i915_save_state(struct drm_device *dev)
 	}
 	i915_save_palette(dev, PIPE_B);
 	dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT);
+	return;
+}
+static void i915_restore_modeset_reg(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		return;
+
+	/* Pipe & plane A info */
+	/* Prime the clock */
+	if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
+		I915_WRITE(DPLL_A, dev_priv->saveDPLL_A &
+			   ~DPLL_VCO_ENABLE);
+		DRM_UDELAY(150);
+	}
+	I915_WRITE(FPA0, dev_priv->saveFPA0);
+	I915_WRITE(FPA1, dev_priv->saveFPA1);
+	/* Actually enable it */
+	I915_WRITE(DPLL_A, dev_priv->saveDPLL_A);
+	DRM_UDELAY(150);
+	if (IS_I965G(dev))
+		I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD);
+	DRM_UDELAY(150);
+
+	/* Restore mode */
+	I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A);
+	I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A);
+	I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A);
+	I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A);
+	I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A);
+	I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A);
+	I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
+
+	/* Restore plane info */
+	I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE);
+	I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS);
+	I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC);
+	I915_WRITE(DSPAADDR, dev_priv->saveDSPAADDR);
+	I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE);
+	if (IS_I965G(dev)) {
+		I915_WRITE(DSPASURF, dev_priv->saveDSPASURF);
+		I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF);
+	}
+
+	I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF);
+
+	i915_restore_palette(dev, PIPE_A);
+	/* Enable the plane */
+	I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR);
+	I915_WRITE(DSPAADDR, I915_READ(DSPAADDR));
+
+	/* Pipe & plane B info */
+	if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) {
+		I915_WRITE(DPLL_B, dev_priv->saveDPLL_B &
+			   ~DPLL_VCO_ENABLE);
+		DRM_UDELAY(150);
+	}
+	I915_WRITE(FPB0, dev_priv->saveFPB0);
+	I915_WRITE(FPB1, dev_priv->saveFPB1);
+	/* Actually enable it */
+	I915_WRITE(DPLL_B, dev_priv->saveDPLL_B);
+	DRM_UDELAY(150);
+	if (IS_I965G(dev))
+		I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD);
+	DRM_UDELAY(150);
+
+	/* Restore mode */
+	I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B);
+	I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B);
+	I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B);
+	I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B);
+	I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B);
+	I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B);
+	I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
+
+	/* Restore plane info */
+	I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE);
+	I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS);
+	I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC);
+	I915_WRITE(DSPBADDR, dev_priv->saveDSPBADDR);
+	I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE);
+	if (IS_I965G(dev)) {
+		I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF);
+		I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF);
+	}
+
+	I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF);
+
+	i915_restore_palette(dev, PIPE_B);
+	/* Enable the plane */
+	I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
+	I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
 
+	return;
+}
+int i915_save_state(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+
+	pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
+
+	/* Render Standby */
+	if (IS_I965G(dev) && IS_MOBILE(dev))
+		dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
+
+	/* Hardware status page */
+	dev_priv->saveHWS = I915_READ(HWS_PGA);
+
+	/* Display arbitration control */
+	dev_priv->saveDSPARB = I915_READ(DSPARB);
+
+	/* This is only meaningful in non-KMS mode */
+	/* Don't save them in KMS mode */
+	i915_save_modeset_reg(dev);
 	/* Cursor state */
 	dev_priv->saveCURACNTR = I915_READ(CURACNTR);
 	dev_priv->saveCURAPOS = I915_READ(CURAPOS);
@@ -322,6 +426,20 @@ int i915_save_state(struct drm_device *dev)
 	dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
 	dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
 
+	/* Display Port state */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		dev_priv->saveDP_B = I915_READ(DP_B);
+		dev_priv->saveDP_C = I915_READ(DP_C);
+		dev_priv->saveDP_D = I915_READ(DP_D);
+		dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(PIPEA_GMCH_DATA_M);
+		dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(PIPEB_GMCH_DATA_M);
+		dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(PIPEA_GMCH_DATA_N);
+		dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(PIPEB_GMCH_DATA_N);
+		dev_priv->savePIPEA_DP_LINK_M = I915_READ(PIPEA_DP_LINK_M);
+		dev_priv->savePIPEB_DP_LINK_M = I915_READ(PIPEB_DP_LINK_M);
+		dev_priv->savePIPEA_DP_LINK_N = I915_READ(PIPEA_DP_LINK_N);
+		dev_priv->savePIPEB_DP_LINK_N = I915_READ(PIPEB_DP_LINK_N);
+	}
 	/* FIXME: save TV & SDVO state */
 
 	/* FBC state */
@@ -404,92 +522,21 @@ int i915_restore_state(struct drm_device *dev)
 			for (i = 0; i < 8; i++)
 				I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
 	}
-
-	/* Pipe & plane A info */
-	/* Prime the clock */
-	if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
-		I915_WRITE(DPLL_A, dev_priv->saveDPLL_A &
-			   ~DPLL_VCO_ENABLE);
-		DRM_UDELAY(150);
+	
+	/* Display port ratios (must be done before clock is set) */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M);
+		I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M);
+		I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N);
+		I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N);
+		I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M);
+		I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M);
+		I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
+		I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
 	}
-	I915_WRITE(FPA0, dev_priv->saveFPA0);
-	I915_WRITE(FPA1, dev_priv->saveFPA1);
-	/* Actually enable it */
-	I915_WRITE(DPLL_A, dev_priv->saveDPLL_A);
-	DRM_UDELAY(150);
-	if (IS_I965G(dev))
-		I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD);
-	DRM_UDELAY(150);
-
-	/* Restore mode */
-	I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A);
-	I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A);
-	I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A);
-	I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A);
-	I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A);
-	I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A);
-	I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
-
-	/* Restore plane info */
-	I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE);
-	I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS);
-	I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC);
-	I915_WRITE(DSPAADDR, dev_priv->saveDSPAADDR);
-	I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE);
-	if (IS_I965G(dev)) {
-		I915_WRITE(DSPASURF, dev_priv->saveDSPASURF);
-		I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF);
-	}
-
-	I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF);
-
-	i915_restore_palette(dev, PIPE_A);
-	/* Enable the plane */
-	I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR);
-	I915_WRITE(DSPAADDR, I915_READ(DSPAADDR));
-
-	/* Pipe & plane B info */
-	if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) {
-		I915_WRITE(DPLL_B, dev_priv->saveDPLL_B &
-			   ~DPLL_VCO_ENABLE);
-		DRM_UDELAY(150);
-	}
-	I915_WRITE(FPB0, dev_priv->saveFPB0);
-	I915_WRITE(FPB1, dev_priv->saveFPB1);
-	/* Actually enable it */
-	I915_WRITE(DPLL_B, dev_priv->saveDPLL_B);
-	DRM_UDELAY(150);
-	if (IS_I965G(dev))
-		I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD);
-	DRM_UDELAY(150);
-
-	/* Restore mode */
-	I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B);
-	I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B);
-	I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B);
-	I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B);
-	I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B);
-	I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B);
-	I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
-
-	/* Restore plane info */
-	I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE);
-	I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS);
-	I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC);
-	I915_WRITE(DSPBADDR, dev_priv->saveDSPBADDR);
-	I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE);
-	if (IS_I965G(dev)) {
-		I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF);
-		I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF);
-	}
-
-	I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF);
-
-	i915_restore_palette(dev, PIPE_B);
-	/* Enable the plane */
-	I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
-	I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
-
+	/* This is only meaningful in non-KMS mode */
+	/* Don't restore them in KMS mode */
+	i915_restore_modeset_reg(dev);
 	/* Cursor state */
 	I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
 	I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
@@ -518,6 +565,12 @@ int i915_restore_state(struct drm_device *dev)
 	I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
 	I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
 
+	/* Display Port state */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		I915_WRITE(DP_B, dev_priv->saveDP_B);
+		I915_WRITE(DP_C, dev_priv->saveDP_C);
+		I915_WRITE(DP_D, dev_priv->saveDP_D);
+	}
 	/* FIXME: restore TV & SDVO state */
 
 	/* FBC info */
@@ -545,7 +598,7 @@ int i915_restore_state(struct drm_device *dev)
 
 	for (i = 0; i < 16; i++) {
 		I915_WRITE(SWF00 + (i << 2), dev_priv->saveSWF0[i]);
-		I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i+7]);
+		I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i]);
 	}
 	for (i = 0; i < 3; i++)
 		I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]);
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index cdd126d068a..f806fcc54e0 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -59,6 +59,16 @@ find_section(struct bdb_header *bdb, int section_id)
 	return NULL;
 }
 
+static u16
+get_blocksize(void *p)
+{
+	u16 *block_ptr, block_size;
+
+	block_ptr = (u16 *)((char *)p - 2);
+	block_size = *block_ptr;
+	return block_size;
+}
+
 static void
 fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
 			struct lvds_dvo_timing *dvo_timing)
@@ -99,9 +109,11 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
 {
 	struct bdb_lvds_options *lvds_options;
 	struct bdb_lvds_lfp_data *lvds_lfp_data;
+	struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
 	struct bdb_lvds_lfp_data_entry *entry;
 	struct lvds_dvo_timing *dvo_timing;
 	struct drm_display_mode *panel_fixed_mode;
+	int lfp_data_size, dvo_timing_offset;
 
 	/* Defaults if we can't find VBT info */
 	dev_priv->lvds_dither = 0;
@@ -119,10 +131,27 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
 	if (!lvds_lfp_data)
 		return;
 
+	lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS);
+	if (!lvds_lfp_data_ptrs)
+		return;
+
 	dev_priv->lvds_vbt = 1;
 
-	entry = &lvds_lfp_data->data[lvds_options->panel_type];
-	dvo_timing = &entry->dvo_timing;
+	lfp_data_size = lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset -
+		lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset;
+	entry = (struct bdb_lvds_lfp_data_entry *)
+		((uint8_t *)lvds_lfp_data->data + (lfp_data_size *
+						   lvds_options->panel_type));
+	dvo_timing_offset = lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset -
+		lvds_lfp_data_ptrs->ptr[0].fp_timing_offset;
+
+	/*
+	 * the size of fp_timing varies on the different platform.
+	 * So calculate the DVO timing relative offset in LVDS data
+	 * entry to get the DVO timing entry
+	 */
+	dvo_timing = (struct lvds_dvo_timing *)
+			((unsigned char *)entry + dvo_timing_offset);
 
 	panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
 
@@ -185,10 +214,47 @@ parse_general_features(struct drm_i915_private *dev_priv,
 		dev_priv->lvds_use_ssc = general->enable_ssc;
 
 		if (dev_priv->lvds_use_ssc) {
-		  if (IS_I855(dev_priv->dev))
-		    dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48;
-		  else
-		    dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96;
+			if (IS_I85X(dev_priv->dev))
+				dev_priv->lvds_ssc_freq =
+					general->ssc_freq ? 66 : 48;
+			else
+				dev_priv->lvds_ssc_freq =
+					general->ssc_freq ? 100 : 96;
+		}
+	}
+}
+
+static void
+parse_general_definitions(struct drm_i915_private *dev_priv,
+			  struct bdb_header *bdb)
+{
+	struct bdb_general_definitions *general;
+	const int crt_bus_map_table[] = {
+		GPIOB,
+		GPIOA,
+		GPIOC,
+		GPIOD,
+		GPIOE,
+		GPIOF,
+	};
+
+	/* Set sensible defaults in case we can't find the general block
+	   or it is the wrong chipset */
+	dev_priv->crt_ddc_bus = -1;
+
+	general = find_section(bdb, BDB_GENERAL_DEFINITIONS);
+	if (general) {
+		u16 block_size = get_blocksize(general);
+		if (block_size >= sizeof(*general)) {
+			int bus_pin = general->crt_ddc_gmbus_pin;
+			DRM_DEBUG("crt_ddc_bus_pin: %d\n", bus_pin);
+			if ((bus_pin >= 1) && (bus_pin <= 6)) {
+				dev_priv->crt_ddc_bus =
+					crt_bus_map_table[bus_pin-1];
+			}
+		} else {
+			DRM_DEBUG("BDB_GD too small (%d). Invalid.\n",
+				  block_size);
 		}
 	}
 }
@@ -201,7 +267,7 @@ parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
 	struct bdb_general_definitions *p_defs;
 	struct child_device_config *p_child;
 	int i, child_device_num, count;
-	u16	block_size, *block_ptr;
+	u16	block_size;
 
 	p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
 	if (!p_defs) {
@@ -219,8 +285,7 @@ parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
 		return;
 	}
 	/* get the block size of general definitions */
-	block_ptr = (u16 *)((char *)p_defs - 2);
-	block_size = *block_ptr;
+	block_size = get_blocksize(p_defs);
 	/* get the number of child device */
 	child_device_num = (block_size - sizeof(*p_defs)) /
 				sizeof(*p_child);
@@ -275,6 +340,25 @@ parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
 	}
 	return;
 }
+
+static void
+parse_driver_features(struct drm_i915_private *dev_priv,
+		       struct bdb_header *bdb)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct bdb_driver_features *driver;
+
+	/* set default for chips without eDP */
+	if (!SUPPORTS_EDP(dev)) {
+		dev_priv->edp_support = 0;
+		return;
+	}
+
+	driver = find_section(bdb, BDB_DRIVER_FEATURES);
+	if (driver && driver->lvds_config == BDB_DRIVER_FEATURE_EDP)
+		dev_priv->edp_support = 1;
+}
+
 /**
  * intel_init_bios - initialize VBIOS settings & find VBT
  * @dev: DRM device
@@ -322,9 +406,12 @@ intel_init_bios(struct drm_device *dev)
 
 	/* Grab useful general definitions */
 	parse_general_features(dev_priv, bdb);
+	parse_general_definitions(dev_priv, bdb);
 	parse_lfp_panel_data(dev_priv, bdb);
 	parse_sdvo_panel_data(dev_priv, bdb);
 	parse_sdvo_device_mapping(dev_priv, bdb);
+	parse_driver_features(dev_priv, bdb);
+
 	pci_unmap_rom(pdev, bios);
 
 	return 0;
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index fe72e1c225d..0f8e5f69ac7 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -381,6 +381,51 @@ struct bdb_sdvo_lvds_options {
 } __attribute__((packed));
 
 
+#define BDB_DRIVER_FEATURE_NO_LVDS		0
+#define BDB_DRIVER_FEATURE_INT_LVDS		1
+#define BDB_DRIVER_FEATURE_SDVO_LVDS		2
+#define BDB_DRIVER_FEATURE_EDP			3
+
+struct bdb_driver_features {
+	u8 boot_dev_algorithm:1;
+	u8 block_display_switch:1;
+	u8 allow_display_switch:1;
+	u8 hotplug_dvo:1;
+	u8 dual_view_zoom:1;
+	u8 int15h_hook:1;
+	u8 sprite_in_clone:1;
+	u8 primary_lfp_id:1;
+
+	u16 boot_mode_x;
+	u16 boot_mode_y;
+	u8 boot_mode_bpp;
+	u8 boot_mode_refresh;
+
+	u16 enable_lfp_primary:1;
+	u16 selective_mode_pruning:1;
+	u16 dual_frequency:1;
+	u16 render_clock_freq:1; /* 0: high freq; 1: low freq */
+	u16 nt_clone_support:1;
+	u16 power_scheme_ui:1; /* 0: CUI; 1: 3rd party */
+	u16 sprite_display_assign:1; /* 0: secondary; 1: primary */
+	u16 cui_aspect_scaling:1;
+	u16 preserve_aspect_ratio:1;
+	u16 sdvo_device_power_down:1;
+	u16 crt_hotplug:1;
+	u16 lvds_config:2;
+	u16 tv_hotplug:1;
+	u16 hdmi_config:2;
+
+	u8 static_display:1;
+	u8 reserved2:7;
+	u16 legacy_crt_max_x;
+	u16 legacy_crt_max_y;
+	u8 legacy_crt_max_refresh;
+
+	u8 hdmi_termination;
+	u8 custom_vbt_version;
+} __attribute__((packed));
+
 bool intel_init_bios(struct drm_device *dev);
 
 /*
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 6de97fc6602..590f81c8f59 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -46,7 +46,7 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
 
 	temp = I915_READ(reg);
 	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
-	temp |= ADPA_DAC_ENABLE;
+	temp &= ~ADPA_DAC_ENABLE;
 
 	switch(mode) {
 	case DRM_MODE_DPMS_ON:
@@ -156,6 +156,9 @@ static bool intel_igdng_crt_detect_hotplug(struct drm_connector *connector)
 
 	temp = adpa = I915_READ(PCH_ADPA);
 
+	adpa &= ~ADPA_DAC_ENABLE;
+	I915_WRITE(PCH_ADPA, adpa);
+
 	adpa &= ~ADPA_CRT_HOTPLUG_MASK;
 
 	adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
@@ -169,13 +172,14 @@ static bool intel_igdng_crt_detect_hotplug(struct drm_connector *connector)
 	DRM_DEBUG("pch crt adpa 0x%x", adpa);
 	I915_WRITE(PCH_ADPA, adpa);
 
-	/* This might not be needed as not specified in spec...*/
-	udelay(1000);
+	while ((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) != 0)
+		;
 
 	/* Check the status to see if both blue and green are on now */
 	adpa = I915_READ(PCH_ADPA);
-	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) ==
-			ADPA_CRT_HOTPLUG_MONITOR_COLOR)
+	adpa &= ADPA_CRT_HOTPLUG_MONITOR_MASK;
+	if ((adpa == ADPA_CRT_HOTPLUG_MONITOR_COLOR) ||
+		(adpa == ADPA_CRT_HOTPLUG_MONITOR_MONO))
 		ret = true;
 	else
 		ret = false;
@@ -428,8 +432,34 @@ static void intel_crt_destroy(struct drm_connector *connector)
 
 static int intel_crt_get_modes(struct drm_connector *connector)
 {
+	int ret;
 	struct intel_output *intel_output = to_intel_output(connector);
-	return intel_ddc_get_modes(intel_output);
+	struct i2c_adapter *ddcbus;
+	struct drm_device *dev = connector->dev;
+
+
+	ret = intel_ddc_get_modes(intel_output);
+	if (ret || !IS_G4X(dev))
+		goto end;
+
+	ddcbus = intel_output->ddc_bus;
+	/* Try to probe digital port for output in DVI-I -> VGA mode. */
+	intel_output->ddc_bus =
+		intel_i2c_create(connector->dev, GPIOD, "CRTDDC_D");
+
+	if (!intel_output->ddc_bus) {
+		intel_output->ddc_bus = ddcbus;
+		dev_printk(KERN_ERR, &connector->dev->pdev->dev,
+			   "DDC bus registration failed for CRTDDC_D.\n");
+		goto end;
+	}
+	/* Try to get modes by GPIOD port */
+	ret = intel_ddc_get_modes(intel_output);
+	intel_i2c_destroy(ddcbus);
+
+end:
+	return ret;
+
 }
 
 static int intel_crt_set_property(struct drm_connector *connector,
@@ -478,6 +508,7 @@ void intel_crt_init(struct drm_device *dev)
 {
 	struct drm_connector *connector;
 	struct intel_output *intel_output;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 i2c_reg;
 
 	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
@@ -497,8 +528,12 @@ void intel_crt_init(struct drm_device *dev)
 	/* Set up the DDC bus. */
 	if (IS_IGDNG(dev))
 		i2c_reg = PCH_GPIOA;
-	else
+	else {
 		i2c_reg = GPIOA;
+		/* Use VBT information for CRT DDC if available */
+		if (dev_priv->crt_ddc_bus != -1)
+			i2c_reg = dev_priv->crt_ddc_bus;
+	}
 	intel_output->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
 	if (!intel_output->ddc_bus) {
 		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
@@ -507,6 +542,10 @@ void intel_crt_init(struct drm_device *dev)
 	}
 
 	intel_output->type = INTEL_OUTPUT_ANALOG;
+	intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+				   (1 << INTEL_ANALOG_CLONE_BIT) |
+				   (1 << INTEL_SDVO_LVDS_CLONE_BIT);
+	intel_output->crtc_mask = (1 << 0) | (1 << 1);
 	connector->interlace_allowed = 0;
 	connector->doublescan_allowed = 0;
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3e1c7816211..748ed50c55c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -25,14 +25,19 @@
  */
 
 #include <linux/i2c.h>
+#include <linux/kernel.h>
 #include "drmP.h"
 #include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
+#include "intel_dp.h"
 
 #include "drm_crtc_helper.h"
 
+#define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
+
 bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
+static void intel_update_watermarks(struct drm_device *dev);
 
 typedef struct {
     /* given values */
@@ -85,7 +90,7 @@ struct intel_limit {
 #define I8XX_P2_SLOW		      4
 #define I8XX_P2_FAST		      2
 #define I8XX_P2_LVDS_SLOW	      14
-#define I8XX_P2_LVDS_FAST	      14 /* No fast option */
+#define I8XX_P2_LVDS_FAST	      7
 #define I8XX_P2_SLOW_LIMIT	 165000
 
 #define I9XX_DOT_MIN		  20000
@@ -127,19 +132,6 @@ struct intel_limit {
 #define I9XX_P2_LVDS_FAST		      7
 #define I9XX_P2_LVDS_SLOW_LIMIT		 112000
 
-#define INTEL_LIMIT_I8XX_DVO_DAC    0
-#define INTEL_LIMIT_I8XX_LVDS	    1
-#define INTEL_LIMIT_I9XX_SDVO_DAC   2
-#define INTEL_LIMIT_I9XX_LVDS	    3
-#define INTEL_LIMIT_G4X_SDVO	    4
-#define INTEL_LIMIT_G4X_HDMI_DAC   5
-#define INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS   6
-#define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS   7
-#define INTEL_LIMIT_IGD_SDVO_DAC    8
-#define INTEL_LIMIT_IGD_LVDS	    9
-#define INTEL_LIMIT_IGDNG_SDVO_DAC  10
-#define INTEL_LIMIT_IGDNG_LVDS	    11
-
 /*The parameter is for SDVO on G4x platform*/
 #define G4X_DOT_SDVO_MIN           25000
 #define G4X_DOT_SDVO_MAX           270000
@@ -218,6 +210,25 @@ struct intel_limit {
 #define G4X_P2_DUAL_CHANNEL_LVDS_FAST           7
 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT          0
 
+/*The parameter is for DISPLAY PORT on G4x platform*/
+#define G4X_DOT_DISPLAY_PORT_MIN           161670
+#define G4X_DOT_DISPLAY_PORT_MAX           227000
+#define G4X_N_DISPLAY_PORT_MIN             1
+#define G4X_N_DISPLAY_PORT_MAX             2
+#define G4X_M_DISPLAY_PORT_MIN             97
+#define G4X_M_DISPLAY_PORT_MAX             108
+#define G4X_M1_DISPLAY_PORT_MIN            0x10
+#define G4X_M1_DISPLAY_PORT_MAX            0x12
+#define G4X_M2_DISPLAY_PORT_MIN            0x05
+#define G4X_M2_DISPLAY_PORT_MAX            0x06
+#define G4X_P_DISPLAY_PORT_MIN             10
+#define G4X_P_DISPLAY_PORT_MAX             20
+#define G4X_P1_DISPLAY_PORT_MIN            1
+#define G4X_P1_DISPLAY_PORT_MAX            2
+#define G4X_P2_DISPLAY_PORT_SLOW           10
+#define G4X_P2_DISPLAY_PORT_FAST           10
+#define G4X_P2_DISPLAY_PORT_LIMIT          0
+
 /* IGDNG */
 /* as we calculate clock using (register_value + 2) for
    N/M1/M2, so here the range value for them is (actual_value-2).
@@ -256,8 +267,14 @@ static bool
 intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			int target, int refclk, intel_clock_t *best_clock);
 
-static const intel_limit_t intel_limits[] = {
-    { /* INTEL_LIMIT_I8XX_DVO_DAC */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *best_clock);
+static bool
+intel_find_pll_igdng_dp(const intel_limit_t *, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *best_clock);
+
+static const intel_limit_t intel_limits_i8xx_dvo = {
         .dot = { .min = I8XX_DOT_MIN,		.max = I8XX_DOT_MAX },
         .vco = { .min = I8XX_VCO_MIN,		.max = I8XX_VCO_MAX },
         .n   = { .min = I8XX_N_MIN,		.max = I8XX_N_MAX },
@@ -269,8 +286,9 @@ static const intel_limit_t intel_limits[] = {
 	.p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
 		 .p2_slow = I8XX_P2_SLOW,	.p2_fast = I8XX_P2_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_I8XX_LVDS */
+};
+
+static const intel_limit_t intel_limits_i8xx_lvds = {
         .dot = { .min = I8XX_DOT_MIN,		.max = I8XX_DOT_MAX },
         .vco = { .min = I8XX_VCO_MIN,		.max = I8XX_VCO_MAX },
         .n   = { .min = I8XX_N_MIN,		.max = I8XX_N_MAX },
@@ -282,8 +300,9 @@ static const intel_limit_t intel_limits[] = {
 	.p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
 		 .p2_slow = I8XX_P2_LVDS_SLOW,	.p2_fast = I8XX_P2_LVDS_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_I9XX_SDVO_DAC */
+};
+	
+static const intel_limit_t intel_limits_i9xx_sdvo = {
         .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX },
         .vco = { .min = I9XX_VCO_MIN,		.max = I9XX_VCO_MAX },
         .n   = { .min = I9XX_N_MIN,		.max = I9XX_N_MAX },
@@ -295,8 +314,9 @@ static const intel_limit_t intel_limits[] = {
 	.p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_SDVO_DAC_SLOW,	.p2_fast = I9XX_P2_SDVO_DAC_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_I9XX_LVDS */
+};
+
+static const intel_limit_t intel_limits_i9xx_lvds = {
         .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX },
         .vco = { .min = I9XX_VCO_MIN,		.max = I9XX_VCO_MAX },
         .n   = { .min = I9XX_N_MIN,		.max = I9XX_N_MAX },
@@ -311,9 +331,10 @@ static const intel_limit_t intel_limits[] = {
 	.p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
+};
+
     /* below parameter and function is for G4X Chipset Family*/
-    { /* INTEL_LIMIT_G4X_SDVO */
+static const intel_limit_t intel_limits_g4x_sdvo = {
 	.dot = { .min = G4X_DOT_SDVO_MIN,	.max = G4X_DOT_SDVO_MAX },
 	.vco = { .min = G4X_VCO_MIN,	        .max = G4X_VCO_MAX},
 	.n   = { .min = G4X_N_SDVO_MIN,	        .max = G4X_N_SDVO_MAX },
@@ -327,8 +348,9 @@ static const intel_limit_t intel_limits[] = {
 		 .p2_fast = G4X_P2_SDVO_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_G4X_HDMI_DAC */
+};
+
+static const intel_limit_t intel_limits_g4x_hdmi = {
 	.dot = { .min = G4X_DOT_HDMI_DAC_MIN,	.max = G4X_DOT_HDMI_DAC_MAX },
 	.vco = { .min = G4X_VCO_MIN,	        .max = G4X_VCO_MAX},
 	.n   = { .min = G4X_N_HDMI_DAC_MIN,	.max = G4X_N_HDMI_DAC_MAX },
@@ -342,8 +364,9 @@ static const intel_limit_t intel_limits[] = {
 		 .p2_fast = G4X_P2_HDMI_DAC_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS */
+};
+
+static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
 	.dot = { .min = G4X_DOT_SINGLE_CHANNEL_LVDS_MIN,
 		 .max = G4X_DOT_SINGLE_CHANNEL_LVDS_MAX },
 	.vco = { .min = G4X_VCO_MIN,
@@ -365,8 +388,9 @@ static const intel_limit_t intel_limits[] = {
 		 .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS */
+};
+
+static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
 	.dot = { .min = G4X_DOT_DUAL_CHANNEL_LVDS_MIN,
 		 .max = G4X_DOT_DUAL_CHANNEL_LVDS_MAX },
 	.vco = { .min = G4X_VCO_MIN,
@@ -388,8 +412,32 @@ static const intel_limit_t intel_limits[] = {
 		 .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_IGD_SDVO */
+};
+
+static const intel_limit_t intel_limits_g4x_display_port = {
+        .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN,
+                 .max = G4X_DOT_DISPLAY_PORT_MAX },
+        .vco = { .min = G4X_VCO_MIN,
+                 .max = G4X_VCO_MAX},
+        .n   = { .min = G4X_N_DISPLAY_PORT_MIN,
+                 .max = G4X_N_DISPLAY_PORT_MAX },
+        .m   = { .min = G4X_M_DISPLAY_PORT_MIN,
+                 .max = G4X_M_DISPLAY_PORT_MAX },
+        .m1  = { .min = G4X_M1_DISPLAY_PORT_MIN,
+                 .max = G4X_M1_DISPLAY_PORT_MAX },
+        .m2  = { .min = G4X_M2_DISPLAY_PORT_MIN,
+                 .max = G4X_M2_DISPLAY_PORT_MAX },
+        .p   = { .min = G4X_P_DISPLAY_PORT_MIN,
+                 .max = G4X_P_DISPLAY_PORT_MAX },
+        .p1  = { .min = G4X_P1_DISPLAY_PORT_MIN,
+                 .max = G4X_P1_DISPLAY_PORT_MAX},
+        .p2  = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT,
+                 .p2_slow = G4X_P2_DISPLAY_PORT_SLOW,
+                 .p2_fast = G4X_P2_DISPLAY_PORT_FAST },
+        .find_pll = intel_find_pll_g4x_dp,
+};
+
+static const intel_limit_t intel_limits_igd_sdvo = {
         .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX},
         .vco = { .min = IGD_VCO_MIN,		.max = IGD_VCO_MAX },
         .n   = { .min = IGD_N_MIN,		.max = IGD_N_MAX },
@@ -401,8 +449,9 @@ static const intel_limit_t intel_limits[] = {
 	.p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_SDVO_DAC_SLOW,	.p2_fast = I9XX_P2_SDVO_DAC_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_IGD_LVDS */
+};
+
+static const intel_limit_t intel_limits_igd_lvds = {
         .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX },
         .vco = { .min = IGD_VCO_MIN,		.max = IGD_VCO_MAX },
         .n   = { .min = IGD_N_MIN,		.max = IGD_N_MAX },
@@ -415,8 +464,9 @@ static const intel_limit_t intel_limits[] = {
 	.p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_SLOW },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_IGDNG_SDVO_DAC */
+};
+
+static const intel_limit_t intel_limits_igdng_sdvo = {
 	.dot = { .min = IGDNG_DOT_MIN,          .max = IGDNG_DOT_MAX },
 	.vco = { .min = IGDNG_VCO_MIN,          .max = IGDNG_VCO_MAX },
 	.n   = { .min = IGDNG_N_MIN,            .max = IGDNG_N_MAX },
@@ -429,8 +479,9 @@ static const intel_limit_t intel_limits[] = {
 		 .p2_slow = IGDNG_P2_SDVO_DAC_SLOW,
 		 .p2_fast = IGDNG_P2_SDVO_DAC_FAST },
 	.find_pll = intel_igdng_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_IGDNG_LVDS */
+};
+
+static const intel_limit_t intel_limits_igdng_lvds = {
 	.dot = { .min = IGDNG_DOT_MIN,          .max = IGDNG_DOT_MAX },
 	.vco = { .min = IGDNG_VCO_MIN,          .max = IGDNG_VCO_MAX },
 	.n   = { .min = IGDNG_N_MIN,            .max = IGDNG_N_MAX },
@@ -443,16 +494,15 @@ static const intel_limit_t intel_limits[] = {
 		 .p2_slow = IGDNG_P2_LVDS_SLOW,
 		 .p2_fast = IGDNG_P2_LVDS_FAST },
 	.find_pll = intel_igdng_find_best_PLL,
-    },
 };
 
 static const intel_limit_t *intel_igdng_limit(struct drm_crtc *crtc)
 {
 	const intel_limit_t *limit;
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-		limit = &intel_limits[INTEL_LIMIT_IGDNG_LVDS];
+		limit = &intel_limits_igdng_lvds;
 	else
-		limit = &intel_limits[INTEL_LIMIT_IGDNG_SDVO_DAC];
+		limit = &intel_limits_igdng_sdvo;
 
 	return limit;
 }
@@ -467,19 +517,19 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
 		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
 		    LVDS_CLKB_POWER_UP)
 			/* LVDS with dual channel */
-			limit = &intel_limits
-					[INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS];
+			limit = &intel_limits_g4x_dual_channel_lvds;
 		else
 			/* LVDS with dual channel */
-			limit = &intel_limits
-					[INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS];
+			limit = &intel_limits_g4x_single_channel_lvds;
 	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
 		   intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
-		limit = &intel_limits[INTEL_LIMIT_G4X_HDMI_DAC];
+		limit = &intel_limits_g4x_hdmi;
 	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
-		limit = &intel_limits[INTEL_LIMIT_G4X_SDVO];
+		limit = &intel_limits_g4x_sdvo;
+	} else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+		limit = &intel_limits_g4x_display_port;
 	} else /* The option is for other outputs */
-		limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+		limit = &intel_limits_i9xx_sdvo;
 
 	return limit;
 }
@@ -495,19 +545,19 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc)
 		limit = intel_g4x_limit(crtc);
 	} else if (IS_I9XX(dev) && !IS_IGD(dev)) {
 		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-			limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS];
+			limit = &intel_limits_i9xx_lvds;
 		else
-			limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+			limit = &intel_limits_i9xx_sdvo;
 	} else if (IS_IGD(dev)) {
 		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-			limit = &intel_limits[INTEL_LIMIT_IGD_LVDS];
+			limit = &intel_limits_igd_lvds;
 		else
-			limit = &intel_limits[INTEL_LIMIT_IGD_SDVO_DAC];
+			limit = &intel_limits_igd_sdvo;
 	} else {
 		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-			limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS];
+			limit = &intel_limits_i8xx_lvds;
 		else
-			limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC];
+			limit = &intel_limits_i8xx_dvo;
 	}
 	return limit;
 }
@@ -553,6 +603,23 @@ bool intel_pipe_has_type (struct drm_crtc *crtc, int type)
     return false;
 }
 
+struct drm_connector *
+intel_pipe_get_output (struct drm_crtc *crtc)
+{
+    struct drm_device *dev = crtc->dev;
+    struct drm_mode_config *mode_config = &dev->mode_config;
+    struct drm_connector *l_entry, *ret = NULL;
+
+    list_for_each_entry(l_entry, &mode_config->connector_list, head) {
+	    if (l_entry->encoder &&
+	        l_entry->encoder->crtc == crtc) {
+		    ret = l_entry;
+		    break;
+	    }
+    }
+    return ret;
+}
+
 #define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
 /**
  * Returns whether the given set of divisors are valid for a given refclk with
@@ -599,8 +666,8 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 	intel_clock_t clock;
 	int err = target;
 
-	if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
-	    (I915_READ(LVDS) & LVDS_PORT_EN) != 0) {
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	    (I915_READ(LVDS)) != 0) {
 		/*
 		 * For LVDS, if the panel is on, just rely on its current
 		 * settings for dual-channel.  We haven't figured out how to
@@ -707,6 +774,30 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 }
 
 static bool
+intel_find_pll_igdng_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *best_clock)
+{
+	struct drm_device *dev = crtc->dev;
+	intel_clock_t clock;
+	if (target < 200000) {
+		clock.n = 1;
+		clock.p1 = 2;
+		clock.p2 = 10;
+		clock.m1 = 12;
+		clock.m2 = 9;
+	} else {
+		clock.n = 2;
+		clock.p1 = 1;
+		clock.p2 = 10;
+		clock.m1 = 14;
+		clock.m2 = 8;
+	}
+	intel_clock(dev, refclk, &clock);
+	memcpy(best_clock, &clock, sizeof(intel_clock_t));
+	return true;
+}
+
+static bool
 intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			int target, int refclk, intel_clock_t *best_clock)
 {
@@ -718,6 +809,14 @@ intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 	int err_most = 47;
 	found = false;
 
+	/* eDP has only 2 clock choice, no n/m/p setting */
+	if (HAS_eDP)
+		return true;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
+		return intel_find_pll_igdng_dp(limit, crtc, target,
+					       refclk, best_clock);
+
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
 		    LVDS_CLKB_POWER_UP)
@@ -764,6 +863,32 @@ out:
 	return found;
 }
 
+/* DisplayPort has only two frequencies, 162MHz and 270MHz */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *best_clock)
+{
+    intel_clock_t clock;
+    if (target < 200000) {
+	clock.p1 = 2;
+	clock.p2 = 10;
+	clock.n = 2;
+	clock.m1 = 23;
+	clock.m2 = 8;
+    } else {
+	clock.p1 = 1;
+	clock.p2 = 10;
+	clock.n = 1;
+	clock.m1 = 14;
+	clock.m2 = 2;
+    }
+    clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
+    clock.p = (clock.p1 * clock.p2);
+    clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
+    memcpy(best_clock, &clock, sizeof(intel_clock_t));
+    return true;
+}
+
 void
 intel_wait_for_vblank(struct drm_device *dev)
 {
@@ -927,13 +1052,97 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 	return 0;
 }
 
+/* Disable the VGA plane that we never use */
+static void i915_disable_vga (struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u8 sr1;
+	u32 vga_reg;
+
+	if (IS_IGDNG(dev))
+		vga_reg = CPU_VGACNTRL;
+	else
+		vga_reg = VGACNTRL;
+
+	if (I915_READ(vga_reg) & VGA_DISP_DISABLE)
+		return;
+
+	I915_WRITE8(VGA_SR_INDEX, 1);
+	sr1 = I915_READ8(VGA_SR_DATA);
+	I915_WRITE8(VGA_SR_DATA, sr1 | (1 << 5));
+	udelay(100);
+
+	I915_WRITE(vga_reg, VGA_DISP_DISABLE);
+}
+
+static void igdng_disable_pll_edp (struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 dpa_ctl;
+
+	DRM_DEBUG("\n");
+	dpa_ctl = I915_READ(DP_A);
+	dpa_ctl &= ~DP_PLL_ENABLE;
+	I915_WRITE(DP_A, dpa_ctl);
+}
+
+static void igdng_enable_pll_edp (struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 dpa_ctl;
+
+	dpa_ctl = I915_READ(DP_A);
+	dpa_ctl |= DP_PLL_ENABLE;
+	I915_WRITE(DP_A, dpa_ctl);
+	udelay(200);
+}
+
+
+static void igdng_set_pll_edp (struct drm_crtc *crtc, int clock)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 dpa_ctl;
+
+	DRM_DEBUG("eDP PLL enable for clock %d\n", clock);
+	dpa_ctl = I915_READ(DP_A);
+	dpa_ctl &= ~DP_PLL_FREQ_MASK;
+
+	if (clock < 200000) {
+		u32 temp;
+		dpa_ctl |= DP_PLL_FREQ_160MHZ;
+		/* workaround for 160Mhz:
+		   1) program 0x4600c bits 15:0 = 0x8124
+		   2) program 0x46010 bit 0 = 1
+		   3) program 0x46034 bit 24 = 1
+		   4) program 0x64000 bit 14 = 1
+		   */
+		temp = I915_READ(0x4600c);
+		temp &= 0xffff0000;
+		I915_WRITE(0x4600c, temp | 0x8124);
+
+		temp = I915_READ(0x46010);
+		I915_WRITE(0x46010, temp | 1);
+
+		temp = I915_READ(0x46034);
+		I915_WRITE(0x46034, temp | (1 << 24));
+	} else {
+		dpa_ctl |= DP_PLL_FREQ_270MHZ;
+	}
+	I915_WRITE(DP_A, dpa_ctl);
+
+	udelay(500);
+}
+
 static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int pipe = intel_crtc->pipe;
-	int plane = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
 	int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
 	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
 	int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
@@ -944,6 +1153,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 	int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR;
 	int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
 	int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1;
+	int pf_win_size = (pipe == 0) ? PFA_WIN_SZ : PFB_WIN_SZ;
 	int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
 	int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
 	int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
@@ -957,7 +1167,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 	int trans_vblank_reg = (pipe == 0) ? TRANS_VBLANK_A : TRANS_VBLANK_B;
 	int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
 	u32 temp;
-	int tries = 5, j;
+	int tries = 5, j, n;
 
 	/* XXX: When our outputs are all unaware of DPMS modes other than off
 	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
@@ -967,27 +1177,32 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 	case DRM_MODE_DPMS_STANDBY:
 	case DRM_MODE_DPMS_SUSPEND:
 		DRM_DEBUG("crtc %d dpms on\n", pipe);
-		/* enable PCH DPLL */
-		temp = I915_READ(pch_dpll_reg);
-		if ((temp & DPLL_VCO_ENABLE) == 0) {
-			I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
-			I915_READ(pch_dpll_reg);
-		}
-
-		/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
-		temp = I915_READ(fdi_rx_reg);
-		I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
-				FDI_SEL_PCDCLK |
-				FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
-		I915_READ(fdi_rx_reg);
-		udelay(200);
+		if (HAS_eDP) {
+			/* enable eDP PLL */
+			igdng_enable_pll_edp(crtc);
+		} else {
+			/* enable PCH DPLL */
+			temp = I915_READ(pch_dpll_reg);
+			if ((temp & DPLL_VCO_ENABLE) == 0) {
+				I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
+				I915_READ(pch_dpll_reg);
+			}
 
-		/* Enable CPU FDI TX PLL, always on for IGDNG */
-		temp = I915_READ(fdi_tx_reg);
-		if ((temp & FDI_TX_PLL_ENABLE) == 0) {
-			I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
-			I915_READ(fdi_tx_reg);
-			udelay(100);
+			/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
+			temp = I915_READ(fdi_rx_reg);
+			I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
+					FDI_SEL_PCDCLK |
+					FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
+			I915_READ(fdi_rx_reg);
+			udelay(200);
+
+			/* Enable CPU FDI TX PLL, always on for IGDNG */
+			temp = I915_READ(fdi_tx_reg);
+			if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+				I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
+				I915_READ(fdi_tx_reg);
+				udelay(100);
+			}
 		}
 
 		/* Enable CPU pipe */
@@ -1006,122 +1221,126 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 			I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
 		}
 
-		/* enable CPU FDI TX and PCH FDI RX */
-		temp = I915_READ(fdi_tx_reg);
-		temp |= FDI_TX_ENABLE;
-		temp |= FDI_DP_PORT_WIDTH_X4; /* default */
-		temp &= ~FDI_LINK_TRAIN_NONE;
-		temp |= FDI_LINK_TRAIN_PATTERN_1;
-		I915_WRITE(fdi_tx_reg, temp);
-		I915_READ(fdi_tx_reg);
+		if (!HAS_eDP) {
+			/* enable CPU FDI TX and PCH FDI RX */
+			temp = I915_READ(fdi_tx_reg);
+			temp |= FDI_TX_ENABLE;
+			temp |= FDI_DP_PORT_WIDTH_X4; /* default */
+			temp &= ~FDI_LINK_TRAIN_NONE;
+			temp |= FDI_LINK_TRAIN_PATTERN_1;
+			I915_WRITE(fdi_tx_reg, temp);
+			I915_READ(fdi_tx_reg);
 
-		temp = I915_READ(fdi_rx_reg);
-		temp &= ~FDI_LINK_TRAIN_NONE;
-		temp |= FDI_LINK_TRAIN_PATTERN_1;
-		I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
-		I915_READ(fdi_rx_reg);
+			temp = I915_READ(fdi_rx_reg);
+			temp &= ~FDI_LINK_TRAIN_NONE;
+			temp |= FDI_LINK_TRAIN_PATTERN_1;
+			I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
+			I915_READ(fdi_rx_reg);
 
-		udelay(150);
+			udelay(150);
 
-		/* Train FDI. */
-		/* umask FDI RX Interrupt symbol_lock and bit_lock bit
-		   for train result */
-		temp = I915_READ(fdi_rx_imr_reg);
-		temp &= ~FDI_RX_SYMBOL_LOCK;
-		temp &= ~FDI_RX_BIT_LOCK;
-		I915_WRITE(fdi_rx_imr_reg, temp);
-		I915_READ(fdi_rx_imr_reg);
-		udelay(150);
+			/* Train FDI. */
+			/* umask FDI RX Interrupt symbol_lock and bit_lock bit
+			   for train result */
+			temp = I915_READ(fdi_rx_imr_reg);
+			temp &= ~FDI_RX_SYMBOL_LOCK;
+			temp &= ~FDI_RX_BIT_LOCK;
+			I915_WRITE(fdi_rx_imr_reg, temp);
+			I915_READ(fdi_rx_imr_reg);
+			udelay(150);
 
-		temp = I915_READ(fdi_rx_iir_reg);
-		DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+			temp = I915_READ(fdi_rx_iir_reg);
+			DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
 
-		if ((temp & FDI_RX_BIT_LOCK) == 0) {
-			for (j = 0; j < tries; j++) {
-				temp = I915_READ(fdi_rx_iir_reg);
-				DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
-				if (temp & FDI_RX_BIT_LOCK)
-					break;
-				udelay(200);
-			}
-			if (j != tries)
+			if ((temp & FDI_RX_BIT_LOCK) == 0) {
+				for (j = 0; j < tries; j++) {
+					temp = I915_READ(fdi_rx_iir_reg);
+					DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+					if (temp & FDI_RX_BIT_LOCK)
+						break;
+					udelay(200);
+				}
+				if (j != tries)
+					I915_WRITE(fdi_rx_iir_reg,
+							temp | FDI_RX_BIT_LOCK);
+				else
+					DRM_DEBUG("train 1 fail\n");
+			} else {
 				I915_WRITE(fdi_rx_iir_reg,
 						temp | FDI_RX_BIT_LOCK);
-			else
-				DRM_DEBUG("train 1 fail\n");
-		} else {
-			I915_WRITE(fdi_rx_iir_reg,
-					temp | FDI_RX_BIT_LOCK);
-			DRM_DEBUG("train 1 ok 2!\n");
-		}
-		temp = I915_READ(fdi_tx_reg);
-		temp &= ~FDI_LINK_TRAIN_NONE;
-		temp |= FDI_LINK_TRAIN_PATTERN_2;
-		I915_WRITE(fdi_tx_reg, temp);
-
-		temp = I915_READ(fdi_rx_reg);
-		temp &= ~FDI_LINK_TRAIN_NONE;
-		temp |= FDI_LINK_TRAIN_PATTERN_2;
-		I915_WRITE(fdi_rx_reg, temp);
+				DRM_DEBUG("train 1 ok 2!\n");
+			}
+			temp = I915_READ(fdi_tx_reg);
+			temp &= ~FDI_LINK_TRAIN_NONE;
+			temp |= FDI_LINK_TRAIN_PATTERN_2;
+			I915_WRITE(fdi_tx_reg, temp);
+
+			temp = I915_READ(fdi_rx_reg);
+			temp &= ~FDI_LINK_TRAIN_NONE;
+			temp |= FDI_LINK_TRAIN_PATTERN_2;
+			I915_WRITE(fdi_rx_reg, temp);
 
-		udelay(150);
+			udelay(150);
 
-		temp = I915_READ(fdi_rx_iir_reg);
-		DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+			temp = I915_READ(fdi_rx_iir_reg);
+			DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
 
-		if ((temp & FDI_RX_SYMBOL_LOCK) == 0) {
-			for (j = 0; j < tries; j++) {
-				temp = I915_READ(fdi_rx_iir_reg);
-				DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
-				if (temp & FDI_RX_SYMBOL_LOCK)
-					break;
-				udelay(200);
-			}
-			if (j != tries) {
+			if ((temp & FDI_RX_SYMBOL_LOCK) == 0) {
+				for (j = 0; j < tries; j++) {
+					temp = I915_READ(fdi_rx_iir_reg);
+					DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+					if (temp & FDI_RX_SYMBOL_LOCK)
+						break;
+					udelay(200);
+				}
+				if (j != tries) {
+					I915_WRITE(fdi_rx_iir_reg,
+							temp | FDI_RX_SYMBOL_LOCK);
+					DRM_DEBUG("train 2 ok 1!\n");
+				} else
+					DRM_DEBUG("train 2 fail\n");
+			} else {
 				I915_WRITE(fdi_rx_iir_reg,
 						temp | FDI_RX_SYMBOL_LOCK);
-				DRM_DEBUG("train 2 ok 1!\n");
-			} else
-				DRM_DEBUG("train 2 fail\n");
-		} else {
-			I915_WRITE(fdi_rx_iir_reg, temp | FDI_RX_SYMBOL_LOCK);
-			DRM_DEBUG("train 2 ok 2!\n");
-		}
-		DRM_DEBUG("train done\n");
+				DRM_DEBUG("train 2 ok 2!\n");
+			}
+			DRM_DEBUG("train done\n");
 
-		/* set transcoder timing */
-		I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
-		I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
-		I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
+			/* set transcoder timing */
+			I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
+			I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
+			I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
 
-		I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
-		I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
-		I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
+			I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
+			I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
+			I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
 
-		/* enable PCH transcoder */
-		temp = I915_READ(transconf_reg);
-		I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
-		I915_READ(transconf_reg);
+			/* enable PCH transcoder */
+			temp = I915_READ(transconf_reg);
+			I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
+			I915_READ(transconf_reg);
 
-		while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
-			;
+			while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
+				;
 
-		/* enable normal */
+			/* enable normal */
 
-		temp = I915_READ(fdi_tx_reg);
-		temp &= ~FDI_LINK_TRAIN_NONE;
-		I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
-				FDI_TX_ENHANCE_FRAME_ENABLE);
-		I915_READ(fdi_tx_reg);
+			temp = I915_READ(fdi_tx_reg);
+			temp &= ~FDI_LINK_TRAIN_NONE;
+			I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
+					FDI_TX_ENHANCE_FRAME_ENABLE);
+			I915_READ(fdi_tx_reg);
 
-		temp = I915_READ(fdi_rx_reg);
-		temp &= ~FDI_LINK_TRAIN_NONE;
-		I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE |
-				FDI_RX_ENHANCE_FRAME_ENABLE);
-		I915_READ(fdi_rx_reg);
+			temp = I915_READ(fdi_rx_reg);
+			temp &= ~FDI_LINK_TRAIN_NONE;
+			I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE |
+					FDI_RX_ENHANCE_FRAME_ENABLE);
+			I915_READ(fdi_rx_reg);
 
-		/* wait one idle pattern time */
-		udelay(100);
+			/* wait one idle pattern time */
+			udelay(100);
+
+		}
 
 		intel_crtc_load_lut(crtc);
 
@@ -1129,8 +1348,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 	case DRM_MODE_DPMS_OFF:
 		DRM_DEBUG("crtc %d dpms off\n", pipe);
 
-		/* Disable the VGA plane that we never use */
-		I915_WRITE(CPU_VGACNTRL, VGA_DISP_DISABLE);
+		i915_disable_vga(dev);
 
 		/* Disable display plane */
 		temp = I915_READ(dspcntr_reg);
@@ -1146,17 +1364,23 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 		if ((temp & PIPEACONF_ENABLE) != 0) {
 			I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
 			I915_READ(pipeconf_reg);
+			n = 0;
 			/* wait for cpu pipe off, pipe state */
-			while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0)
-				;
+			while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0) {
+				n++;
+				if (n < 60) {
+					udelay(500);
+					continue;
+				} else {
+					DRM_DEBUG("pipe %d off delay\n", pipe);
+					break;
+				}
+			}
 		} else
 			DRM_DEBUG("crtc %d is disabled\n", pipe);
 
-		/* IGDNG-A : disable cpu panel fitter ? */
-		temp = I915_READ(pf_ctl_reg);
-		if ((temp & PF_ENABLE) != 0) {
-			I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
-			I915_READ(pf_ctl_reg);
+		if (HAS_eDP) {
+			igdng_disable_pll_edp(crtc);
 		}
 
 		/* disable CPU FDI tx and PCH FDI rx */
@@ -1168,6 +1392,8 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 		I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
 		I915_READ(fdi_rx_reg);
 
+		udelay(100);
+
 		/* still set train pattern 1 */
 		temp = I915_READ(fdi_tx_reg);
 		temp &= ~FDI_LINK_TRAIN_NONE;
@@ -1179,14 +1405,25 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 		temp |= FDI_LINK_TRAIN_PATTERN_1;
 		I915_WRITE(fdi_rx_reg, temp);
 
+		udelay(100);
+
 		/* disable PCH transcoder */
 		temp = I915_READ(transconf_reg);
 		if ((temp & TRANS_ENABLE) != 0) {
 			I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
 			I915_READ(transconf_reg);
+			n = 0;
 			/* wait for PCH transcoder off, transcoder state */
-			while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0)
-				;
+			while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0) {
+				n++;
+				if (n < 60) {
+					udelay(500);
+					continue;
+				} else {
+					DRM_DEBUG("transcoder %d off delay\n", pipe);
+					break;
+				}
+			}
 		}
 
 		/* disable PCH DPLL */
@@ -1204,6 +1441,22 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 			I915_READ(fdi_rx_reg);
 		}
 
+		/* Disable CPU FDI TX PLL */
+		temp = I915_READ(fdi_tx_reg);
+		if ((temp & FDI_TX_PLL_ENABLE) != 0) {
+			I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE);
+			I915_READ(fdi_tx_reg);
+			udelay(100);
+		}
+
+		/* Disable PF */
+		temp = I915_READ(pf_ctl_reg);
+		if ((temp & PF_ENABLE) != 0) {
+			I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
+			I915_READ(pf_ctl_reg);
+		}
+		I915_WRITE(pf_win_size, 0);
+
 		/* Wait for the clocks to turn off. */
 		udelay(150);
 		break;
@@ -1263,13 +1516,15 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
 
 		/* Give the overlay scaler a chance to enable if it's on this pipe */
 		//intel_crtc_dpms_video(crtc, true); TODO
+		intel_update_watermarks(dev);
 	break;
 	case DRM_MODE_DPMS_OFF:
+		intel_update_watermarks(dev);
 		/* Give the overlay scaler a chance to disable if it's on this pipe */
 		//intel_crtc_dpms_video(crtc, FALSE); TODO
 
 		/* Disable the VGA plane that we never use */
-		I915_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+		i915_disable_vga(dev);
 
 		/* Disable display plane */
 		temp = I915_READ(dspcntr_reg);
@@ -1443,7 +1698,6 @@ static int intel_get_core_clock_speed(struct drm_device *dev)
 	return 0; /* Silence gcc warning */
 }
 
-
 /**
  * Return the pipe currently connected to the panel fitter,
  * or -1 if the panel fitter is not present or not in use
@@ -1502,7 +1756,7 @@ igdng_compute_m_n(int bytes_per_pixel, int nlanes,
 
 	temp = (u64) DATA_N * pixel_clock;
 	temp = div_u64(temp, link_clock);
-	m_n->gmch_m = (temp * bytes_per_pixel) / nlanes;
+	m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes);
 	m_n->gmch_n = DATA_N;
 	fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
 
@@ -1513,6 +1767,478 @@ igdng_compute_m_n(int bytes_per_pixel, int nlanes,
 }
 
 
+struct intel_watermark_params {
+	unsigned long fifo_size;
+	unsigned long max_wm;
+	unsigned long default_wm;
+	unsigned long guard_size;
+	unsigned long cacheline_size;
+};
+
+/* IGD has different values for various configs */
+static struct intel_watermark_params igd_display_wm = {
+	IGD_DISPLAY_FIFO,
+	IGD_MAX_WM,
+	IGD_DFT_WM,
+	IGD_GUARD_WM,
+	IGD_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params igd_display_hplloff_wm = {
+	IGD_DISPLAY_FIFO,
+	IGD_MAX_WM,
+	IGD_DFT_HPLLOFF_WM,
+	IGD_GUARD_WM,
+	IGD_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params igd_cursor_wm = {
+	IGD_CURSOR_FIFO,
+	IGD_CURSOR_MAX_WM,
+	IGD_CURSOR_DFT_WM,
+	IGD_CURSOR_GUARD_WM,
+	IGD_FIFO_LINE_SIZE,
+};
+static struct intel_watermark_params igd_cursor_hplloff_wm = {
+	IGD_CURSOR_FIFO,
+	IGD_CURSOR_MAX_WM,
+	IGD_CURSOR_DFT_WM,
+	IGD_CURSOR_GUARD_WM,
+	IGD_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i945_wm_info = {
+	I945_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	2,
+	I915_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i915_wm_info = {
+	I915_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	2,
+	I915_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i855_wm_info = {
+	I855GM_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	2,
+	I830_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i830_wm_info = {
+	I830_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	2,
+	I830_FIFO_LINE_SIZE
+};
+
+/**
+ * intel_calculate_wm - calculate watermark level
+ * @clock_in_khz: pixel clock
+ * @wm: chip FIFO params
+ * @pixel_size: display pixel size
+ * @latency_ns: memory latency for the platform
+ *
+ * Calculate the watermark level (the level at which the display plane will
+ * start fetching from memory again).  Each chip has a different display
+ * FIFO size and allocation, so the caller needs to figure that out and pass
+ * in the correct intel_watermark_params structure.
+ *
+ * As the pixel clock runs, the FIFO will be drained at a rate that depends
+ * on the pixel size.  When it reaches the watermark level, it'll start
+ * fetching FIFO line sized based chunks from memory until the FIFO fills
+ * past the watermark point.  If the FIFO drains completely, a FIFO underrun
+ * will occur, and a display engine hang could result.
+ */
+static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
+					struct intel_watermark_params *wm,
+					int pixel_size,
+					unsigned long latency_ns)
+{
+	long entries_required, wm_size;
+
+	entries_required = (clock_in_khz * pixel_size * latency_ns) / 1000000;
+	entries_required /= wm->cacheline_size;
+
+	DRM_DEBUG("FIFO entries required for mode: %d\n", entries_required);
+
+	wm_size = wm->fifo_size - (entries_required + wm->guard_size);
+
+	DRM_DEBUG("FIFO watermark level: %d\n", wm_size);
+
+	/* Don't promote wm_size to unsigned... */
+	if (wm_size > (long)wm->max_wm)
+		wm_size = wm->max_wm;
+	if (wm_size <= 0)
+		wm_size = wm->default_wm;
+	return wm_size;
+}
+
+struct cxsr_latency {
+	int is_desktop;
+	unsigned long fsb_freq;
+	unsigned long mem_freq;
+	unsigned long display_sr;
+	unsigned long display_hpll_disable;
+	unsigned long cursor_sr;
+	unsigned long cursor_hpll_disable;
+};
+
+static struct cxsr_latency cxsr_latency_table[] = {
+	{1, 800, 400, 3382, 33382, 3983, 33983},    /* DDR2-400 SC */
+	{1, 800, 667, 3354, 33354, 3807, 33807},    /* DDR2-667 SC */
+	{1, 800, 800, 3347, 33347, 3763, 33763},    /* DDR2-800 SC */
+
+	{1, 667, 400, 3400, 33400, 4021, 34021},    /* DDR2-400 SC */
+	{1, 667, 667, 3372, 33372, 3845, 33845},    /* DDR2-667 SC */
+	{1, 667, 800, 3386, 33386, 3822, 33822},    /* DDR2-800 SC */
+
+	{1, 400, 400, 3472, 33472, 4173, 34173},    /* DDR2-400 SC */
+	{1, 400, 667, 3443, 33443, 3996, 33996},    /* DDR2-667 SC */
+	{1, 400, 800, 3430, 33430, 3946, 33946},    /* DDR2-800 SC */
+
+	{0, 800, 400, 3438, 33438, 4065, 34065},    /* DDR2-400 SC */
+	{0, 800, 667, 3410, 33410, 3889, 33889},    /* DDR2-667 SC */
+	{0, 800, 800, 3403, 33403, 3845, 33845},    /* DDR2-800 SC */
+
+	{0, 667, 400, 3456, 33456, 4103, 34106},    /* DDR2-400 SC */
+	{0, 667, 667, 3428, 33428, 3927, 33927},    /* DDR2-667 SC */
+	{0, 667, 800, 3443, 33443, 3905, 33905},    /* DDR2-800 SC */
+
+	{0, 400, 400, 3528, 33528, 4255, 34255},    /* DDR2-400 SC */
+	{0, 400, 667, 3500, 33500, 4079, 34079},    /* DDR2-667 SC */
+	{0, 400, 800, 3487, 33487, 4029, 34029},    /* DDR2-800 SC */
+};
+
+static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int fsb,
+						   int mem)
+{
+	int i;
+	struct cxsr_latency *latency;
+
+	if (fsb == 0 || mem == 0)
+		return NULL;
+
+	for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
+		latency = &cxsr_latency_table[i];
+		if (is_desktop == latency->is_desktop &&
+			fsb == latency->fsb_freq && mem == latency->mem_freq)
+			break;
+	}
+	if (i >= ARRAY_SIZE(cxsr_latency_table)) {
+		DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n");
+		return NULL;
+	}
+	return latency;
+}
+
+static void igd_disable_cxsr(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 reg;
+
+	/* deactivate cxsr */
+	reg = I915_READ(DSPFW3);
+	reg &= ~(IGD_SELF_REFRESH_EN);
+	I915_WRITE(DSPFW3, reg);
+	DRM_INFO("Big FIFO is disabled\n");
+}
+
+static void igd_enable_cxsr(struct drm_device *dev, unsigned long clock,
+			    int pixel_size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 reg;
+	unsigned long wm;
+	struct cxsr_latency *latency;
+
+	latency = intel_get_cxsr_latency(IS_IGDG(dev), dev_priv->fsb_freq,
+		dev_priv->mem_freq);
+	if (!latency) {
+		DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n");
+		igd_disable_cxsr(dev);
+		return;
+	}
+
+	/* Display SR */
+	wm = intel_calculate_wm(clock, &igd_display_wm, pixel_size,
+				latency->display_sr);
+	reg = I915_READ(DSPFW1);
+	reg &= 0x7fffff;
+	reg |= wm << 23;
+	I915_WRITE(DSPFW1, reg);
+	DRM_DEBUG("DSPFW1 register is %x\n", reg);
+
+	/* cursor SR */
+	wm = intel_calculate_wm(clock, &igd_cursor_wm, pixel_size,
+				latency->cursor_sr);
+	reg = I915_READ(DSPFW3);
+	reg &= ~(0x3f << 24);
+	reg |= (wm & 0x3f) << 24;
+	I915_WRITE(DSPFW3, reg);
+
+	/* Display HPLL off SR */
+	wm = intel_calculate_wm(clock, &igd_display_hplloff_wm,
+		latency->display_hpll_disable, I915_FIFO_LINE_SIZE);
+	reg = I915_READ(DSPFW3);
+	reg &= 0xfffffe00;
+	reg |= wm & 0x1ff;
+	I915_WRITE(DSPFW3, reg);
+
+	/* cursor HPLL off SR */
+	wm = intel_calculate_wm(clock, &igd_cursor_hplloff_wm, pixel_size,
+				latency->cursor_hpll_disable);
+	reg = I915_READ(DSPFW3);
+	reg &= ~(0x3f << 16);
+	reg |= (wm & 0x3f) << 16;
+	I915_WRITE(DSPFW3, reg);
+	DRM_DEBUG("DSPFW3 register is %x\n", reg);
+
+	/* activate cxsr */
+	reg = I915_READ(DSPFW3);
+	reg |= IGD_SELF_REFRESH_EN;
+	I915_WRITE(DSPFW3, reg);
+
+	DRM_INFO("Big FIFO is enabled\n");
+
+	return;
+}
+
+/*
+ * Latency for FIFO fetches is dependent on several factors:
+ *   - memory configuration (speed, channels)
+ *   - chipset
+ *   - current MCH state
+ * It can be fairly high in some situations, so here we assume a fairly
+ * pessimal value.  It's a tradeoff between extra memory fetches (if we
+ * set this value too high, the FIFO will fetch frequently to stay full)
+ * and power consumption (set it too low to save power and we might see
+ * FIFO underruns and display "flicker").
+ *
+ * A value of 5us seems to be a good balance; safe for very low end
+ * platforms but not overly aggressive on lower latency configs.
+ */
+const static int latency_ns = 5000;
+
+static int intel_get_fifo_size(struct drm_device *dev, int plane)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t dsparb = I915_READ(DSPARB);
+	int size;
+
+	if (IS_I9XX(dev)) {
+		if (plane == 0)
+			size = dsparb & 0x7f;
+		else
+			size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) -
+				(dsparb & 0x7f);
+	} else if (IS_I85X(dev)) {
+		if (plane == 0)
+			size = dsparb & 0x1ff;
+		else
+			size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) -
+				(dsparb & 0x1ff);
+		size >>= 1; /* Convert to cachelines */
+	} else if (IS_845G(dev)) {
+		size = dsparb & 0x7f;
+		size >>= 2; /* Convert to cachelines */
+	} else {
+		size = dsparb & 0x7f;
+		size >>= 1; /* Convert to cachelines */
+	}
+
+	DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
+		  size);
+
+	return size;
+}
+
+static void i965_update_wm(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	DRM_DEBUG("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 8\n");
+
+	/* 965 has limitations... */
+	I915_WRITE(DSPFW1, (8 << 16) | (8 << 8) | (8 << 0));
+	I915_WRITE(DSPFW2, (8 << 8) | (8 << 0));
+}
+
+static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
+			   int planeb_clock, int sr_hdisplay, int pixel_size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t fwater_lo;
+	uint32_t fwater_hi;
+	int total_size, cacheline_size, cwm, srwm = 1;
+	int planea_wm, planeb_wm;
+	struct intel_watermark_params planea_params, planeb_params;
+	unsigned long line_time_us;
+	int sr_clock, sr_entries = 0;
+
+	/* Create copies of the base settings for each pipe */
+	if (IS_I965GM(dev) || IS_I945GM(dev))
+		planea_params = planeb_params = i945_wm_info;
+	else if (IS_I9XX(dev))
+		planea_params = planeb_params = i915_wm_info;
+	else
+		planea_params = planeb_params = i855_wm_info;
+
+	/* Grab a couple of global values before we overwrite them */
+	total_size = planea_params.fifo_size;
+	cacheline_size = planea_params.cacheline_size;
+
+	/* Update per-plane FIFO sizes */
+	planea_params.fifo_size = intel_get_fifo_size(dev, 0);
+	planeb_params.fifo_size = intel_get_fifo_size(dev, 1);
+
+	planea_wm = intel_calculate_wm(planea_clock, &planea_params,
+				       pixel_size, latency_ns);
+	planeb_wm = intel_calculate_wm(planeb_clock, &planeb_params,
+				       pixel_size, latency_ns);
+	DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
+
+	/*
+	 * Overlay gets an aggressive default since video jitter is bad.
+	 */
+	cwm = 2;
+
+	/* Calc sr entries for one plane configs */
+	if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
+		/* self-refresh has much higher latency */
+		const static int sr_latency_ns = 6000;
+
+		sr_clock = planea_clock ? planea_clock : planeb_clock;
+		line_time_us = ((sr_hdisplay * 1000) / sr_clock);
+
+		/* Use ns/us then divide to preserve precision */
+		sr_entries = (((sr_latency_ns / line_time_us) + 1) *
+			      pixel_size * sr_hdisplay) / 1000;
+		sr_entries = roundup(sr_entries / cacheline_size, 1);
+		DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
+		srwm = total_size - sr_entries;
+		if (srwm < 0)
+			srwm = 1;
+		if (IS_I9XX(dev))
+			I915_WRITE(FW_BLC_SELF, (srwm & 0x3f));
+	}
+
+	DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
+		  planea_wm, planeb_wm, cwm, srwm);
+
+	fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
+	fwater_hi = (cwm & 0x1f);
+
+	/* Set request length to 8 cachelines per fetch */
+	fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
+	fwater_hi = fwater_hi | (1 << 8);
+
+	I915_WRITE(FW_BLC, fwater_lo);
+	I915_WRITE(FW_BLC2, fwater_hi);
+}
+
+static void i830_update_wm(struct drm_device *dev, int planea_clock,
+			   int pixel_size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t fwater_lo = I915_READ(FW_BLC) & ~0xfff;
+	int planea_wm;
+
+	i830_wm_info.fifo_size = intel_get_fifo_size(dev, 0);
+
+	planea_wm = intel_calculate_wm(planea_clock, &i830_wm_info,
+				       pixel_size, latency_ns);
+	fwater_lo |= (3<<8) | planea_wm;
+
+	DRM_DEBUG("Setting FIFO watermarks - A: %d\n", planea_wm);
+
+	I915_WRITE(FW_BLC, fwater_lo);
+}
+
+/**
+ * intel_update_watermarks - update FIFO watermark values based on current modes
+ *
+ * Calculate watermark values for the various WM regs based on current mode
+ * and plane configuration.
+ *
+ * There are several cases to deal with here:
+ *   - normal (i.e. non-self-refresh)
+ *   - self-refresh (SR) mode
+ *   - lines are large relative to FIFO size (buffer can hold up to 2)
+ *   - lines are small relative to FIFO size (buffer can hold more than 2
+ *     lines), so need to account for TLB latency
+ *
+ *   The normal calculation is:
+ *     watermark = dotclock * bytes per pixel * latency
+ *   where latency is platform & configuration dependent (we assume pessimal
+ *   values here).
+ *
+ *   The SR calculation is:
+ *     watermark = (trunc(latency/line time)+1) * surface width *
+ *       bytes per pixel
+ *   where
+ *     line time = htotal / dotclock
+ *   and latency is assumed to be high, as above.
+ *
+ * The final value programmed to the register should always be rounded up,
+ * and include an extra 2 entries to account for clock crossings.
+ *
+ * We don't use the sprite, so we can ignore that.  And on Crestline we have
+ * to set the non-SR watermarks to 8.
+  */
+static void intel_update_watermarks(struct drm_device *dev)
+{
+	struct drm_crtc *crtc;
+	struct intel_crtc *intel_crtc;
+	int sr_hdisplay = 0;
+	unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0;
+	int enabled = 0, pixel_size = 0;
+
+	if (DSPARB_HWCONTROL(dev))
+		return;
+
+	/* Get the clock config from both planes */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		intel_crtc = to_intel_crtc(crtc);
+		if (crtc->enabled) {
+			enabled++;
+			if (intel_crtc->plane == 0) {
+				DRM_DEBUG("plane A (pipe %d) clock: %d\n",
+					  intel_crtc->pipe, crtc->mode.clock);
+				planea_clock = crtc->mode.clock;
+			} else {
+				DRM_DEBUG("plane B (pipe %d) clock: %d\n",
+					  intel_crtc->pipe, crtc->mode.clock);
+				planeb_clock = crtc->mode.clock;
+			}
+			sr_hdisplay = crtc->mode.hdisplay;
+			sr_clock = crtc->mode.clock;
+			if (crtc->fb)
+				pixel_size = crtc->fb->bits_per_pixel / 8;
+			else
+				pixel_size = 4; /* by default */
+		}
+	}
+
+	if (enabled <= 0)
+		return;
+
+	/* Single plane configs can enable self refresh */
+	if (enabled == 1 && IS_IGD(dev))
+		igd_enable_cxsr(dev, sr_clock, pixel_size);
+	else if (IS_IGD(dev))
+		igd_disable_cxsr(dev);
+
+	if (IS_I965G(dev))
+		i965_update_wm(dev);
+	else if (IS_I9XX(dev) || IS_MOBILE(dev))
+		i9xx_update_wm(dev, planea_clock, planeb_clock, sr_hdisplay,
+			       pixel_size);
+	else
+		i830_update_wm(dev, planea_clock, pixel_size);
+}
+
 static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			       struct drm_display_mode *mode,
 			       struct drm_display_mode *adjusted_mode,
@@ -1541,7 +2267,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	intel_clock_t clock;
 	u32 dpll = 0, fp = 0, dspcntr, pipeconf;
 	bool ok, is_sdvo = false, is_dvo = false;
-	bool is_crt = false, is_lvds = false, is_tv = false;
+	bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+	bool is_edp = false;
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct drm_connector *connector;
 	const intel_limit_t *limit;
@@ -1557,6 +2284,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	int lvds_reg = LVDS;
 	u32 temp;
 	int sdvo_pixel_multiply;
+	int target_clock;
 
 	drm_vblank_pre_modeset(dev, pipe);
 
@@ -1585,6 +2313,12 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		case INTEL_OUTPUT_ANALOG:
 			is_crt = true;
 			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			is_dp = true;
+			break;
+		case INTEL_OUTPUT_EDP:
+			is_edp = true;
+			break;
 		}
 
 		num_outputs++;
@@ -1600,6 +2334,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	} else {
 		refclk = 48000;
 	}
+	
 
 	/*
 	 * Returns a set of divisors for the desired target clock with the given
@@ -1635,11 +2370,29 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	}
 
 	/* FDI link */
-	if (IS_IGDNG(dev))
-		igdng_compute_m_n(3, 4, /* lane num 4 */
-				adjusted_mode->clock,
-				270000, /* lane clock */
-				&m_n);
+	if (IS_IGDNG(dev)) {
+		int lane, link_bw;
+		/* eDP doesn't require FDI link, so just set DP M/N
+		   according to current link config */
+		if (is_edp) {
+			struct drm_connector *edp;
+			target_clock = mode->clock;
+			edp = intel_pipe_get_output(crtc);
+			intel_edp_link_config(to_intel_output(edp),
+					&lane, &link_bw);
+		} else {
+			/* DP over FDI requires target mode clock
+			   instead of link clock */
+			if (is_dp)
+				target_clock = mode->clock;
+			else
+				target_clock = adjusted_mode->clock;
+			lane = 4;
+			link_bw = 270000;
+		}
+		igdng_compute_m_n(3, lane, target_clock,
+				  link_bw, &m_n);
+	}
 
 	if (IS_IGD(dev))
 		fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
@@ -1657,11 +2410,13 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		if (is_sdvo) {
 			dpll |= DPLL_DVO_HIGH_SPEED;
 			sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
-			if (IS_I945G(dev) || IS_I945GM(dev))
+			if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
 				dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
 			else if (IS_IGDNG(dev))
 				dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
 		}
+		if (is_dp)
+			dpll |= DPLL_DVO_HIGH_SPEED;
 
 		/* compute bitmask from p1 value */
 		if (IS_IGD(dev))
@@ -1758,29 +2513,15 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		dpll_reg = pch_dpll_reg;
 	}
 
-	if (dpll & DPLL_VCO_ENABLE) {
+	if (is_edp) {
+		igdng_disable_pll_edp(crtc);
+	} else if ((dpll & DPLL_VCO_ENABLE)) {
 		I915_WRITE(fp_reg, fp);
 		I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
 		I915_READ(dpll_reg);
 		udelay(150);
 	}
 
-	if (IS_IGDNG(dev)) {
-		/* enable PCH clock reference source */
-		/* XXX need to change the setting for other outputs */
-		u32 temp;
-		temp = I915_READ(PCH_DREF_CONTROL);
-		temp &= ~DREF_NONSPREAD_SOURCE_MASK;
-		temp |= DREF_NONSPREAD_CK505_ENABLE;
-		temp &= ~DREF_SSC_SOURCE_MASK;
-		temp |= DREF_SSC_SOURCE_ENABLE;
-		temp &= ~DREF_SSC1_ENABLE;
-		/* if no eDP, disable source output to CPU */
-		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
-		temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
-		I915_WRITE(PCH_DREF_CONTROL, temp);
-	}
-
 	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
 	 * This is an exception to the general rule that mode_set doesn't turn
 	 * things on.
@@ -1809,24 +2550,28 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		I915_WRITE(lvds_reg, lvds);
 		I915_READ(lvds_reg);
 	}
+	if (is_dp)
+		intel_dp_set_m_n(crtc, mode, adjusted_mode);
 
-	I915_WRITE(fp_reg, fp);
-	I915_WRITE(dpll_reg, dpll);
-	I915_READ(dpll_reg);
-	/* Wait for the clocks to stabilize. */
-	udelay(150);
-
-	if (IS_I965G(dev) && !IS_IGDNG(dev)) {
-		sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
-		I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
-			   ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
-	} else {
-		/* write it again -- the BIOS does, after all */
+	if (!is_edp) {
+		I915_WRITE(fp_reg, fp);
 		I915_WRITE(dpll_reg, dpll);
+		I915_READ(dpll_reg);
+		/* Wait for the clocks to stabilize. */
+		udelay(150);
+
+		if (IS_I965G(dev) && !IS_IGDNG(dev)) {
+			sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+			I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
+					((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+		} else {
+			/* write it again -- the BIOS does, after all */
+			I915_WRITE(dpll_reg, dpll);
+		}
+		I915_READ(dpll_reg);
+		/* Wait for the clocks to stabilize. */
+		udelay(150);
 	}
-	I915_READ(dpll_reg);
-	/* Wait for the clocks to stabilize. */
-	udelay(150);
 
 	I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
 		   ((adjusted_mode->crtc_htotal - 1) << 16));
@@ -1856,10 +2601,14 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		I915_WRITE(link_m1_reg, m_n.link_m);
 		I915_WRITE(link_n1_reg, m_n.link_n);
 
-		 /* enable FDI RX PLL too */
-		temp = I915_READ(fdi_rx_reg);
-		I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
-		udelay(200);
+		if (is_edp) {
+			igdng_set_pll_edp(crtc, adjusted_mode->clock);
+		} else {
+			/* enable FDI RX PLL too */
+			temp = I915_READ(fdi_rx_reg);
+			I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
+			udelay(200);
+		}
 	}
 
 	I915_WRITE(pipeconf_reg, pipeconf);
@@ -1871,6 +2620,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 
 	/* Flush the plane changes */
 	ret = intel_pipe_set_base(crtc, x, y, old_fb);
+
+	intel_update_watermarks(dev);
+
 	drm_vblank_post_modeset(dev, pipe);
 
 	return ret;
@@ -2359,6 +3111,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 
 	drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
 	intel_crtc->pipe = pipe;
+	intel_crtc->plane = pipe;
 	for (i = 0; i < 256; i++) {
 		intel_crtc->lut_r[i] = i;
 		intel_crtc->lut_g[i] = i;
@@ -2431,7 +3184,7 @@ static int intel_connector_clones(struct drm_device *dev, int type_mask)
 
         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		struct intel_output *intel_output = to_intel_output(connector);
-		if (type_mask & (1 << intel_output->type))
+		if (type_mask & intel_output->clone_mask)
 			index_mask |= (1 << entry);
 		entry++;
 	}
@@ -2453,12 +3206,17 @@ static void intel_setup_outputs(struct drm_device *dev)
 	if (IS_IGDNG(dev)) {
 		int found;
 
+		if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED))
+			intel_dp_init(dev, DP_A);
+
 		if (I915_READ(HDMIB) & PORT_DETECTED) {
 			/* check SDVOB */
 			/* found = intel_sdvo_init(dev, HDMIB); */
 			found = 0;
 			if (!found)
 				intel_hdmi_init(dev, HDMIB);
+			if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
+				intel_dp_init(dev, PCH_DP_B);
 		}
 
 		if (I915_READ(HDMIC) & PORT_DETECTED)
@@ -2467,27 +3225,39 @@ static void intel_setup_outputs(struct drm_device *dev)
 		if (I915_READ(HDMID) & PORT_DETECTED)
 			intel_hdmi_init(dev, HDMID);
 
+		if (I915_READ(PCH_DP_C) & DP_DETECTED)
+			intel_dp_init(dev, PCH_DP_C);
+
+		if (I915_READ(PCH_DP_D) & DP_DETECTED)
+			intel_dp_init(dev, PCH_DP_D);
+
 	} else if (IS_I9XX(dev)) {
-		int found;
-		u32 reg;
+		bool found = false;
 
 		if (I915_READ(SDVOB) & SDVO_DETECTED) {
 			found = intel_sdvo_init(dev, SDVOB);
 			if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
 				intel_hdmi_init(dev, SDVOB);
+
+			if (!found && SUPPORTS_INTEGRATED_DP(dev))
+				intel_dp_init(dev, DP_B);
 		}
 
 		/* Before G4X SDVOC doesn't have its own detect register */
-		if (IS_G4X(dev))
-			reg = SDVOC;
-		else
-			reg = SDVOB;
 
-		if (I915_READ(reg) & SDVO_DETECTED) {
+		if (I915_READ(SDVOB) & SDVO_DETECTED)
 			found = intel_sdvo_init(dev, SDVOC);
-			if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
+
+		if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
+
+			if (SUPPORTS_INTEGRATED_HDMI(dev))
 				intel_hdmi_init(dev, SDVOC);
+			if (SUPPORTS_INTEGRATED_DP(dev))
+				intel_dp_init(dev, DP_C);
 		}
+
+		if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
+			intel_dp_init(dev, DP_D);
 	} else
 		intel_dvo_init(dev);
 
@@ -2497,42 +3267,10 @@ static void intel_setup_outputs(struct drm_device *dev)
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		struct intel_output *intel_output = to_intel_output(connector);
 		struct drm_encoder *encoder = &intel_output->enc;
-		int crtc_mask = 0, clone_mask = 0;
 
-		/* valid crtcs */
-		switch(intel_output->type) {
-		case INTEL_OUTPUT_HDMI:
-			crtc_mask = ((1 << 0)|
-				     (1 << 1));
-			clone_mask = ((1 << INTEL_OUTPUT_HDMI));
-			break;
-		case INTEL_OUTPUT_DVO:
-		case INTEL_OUTPUT_SDVO:
-			crtc_mask = ((1 << 0)|
-				     (1 << 1));
-			clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
-				      (1 << INTEL_OUTPUT_DVO) |
-				      (1 << INTEL_OUTPUT_SDVO));
-			break;
-		case INTEL_OUTPUT_ANALOG:
-			crtc_mask = ((1 << 0)|
-				     (1 << 1));
-			clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
-				      (1 << INTEL_OUTPUT_DVO) |
-				      (1 << INTEL_OUTPUT_SDVO));
-			break;
-		case INTEL_OUTPUT_LVDS:
-			crtc_mask = (1 << 1);
-			clone_mask = (1 << INTEL_OUTPUT_LVDS);
-			break;
-		case INTEL_OUTPUT_TVOUT:
-			crtc_mask = ((1 << 0) |
-				     (1 << 1));
-			clone_mask = (1 << INTEL_OUTPUT_TVOUT);
-			break;
-		}
-		encoder->possible_crtcs = crtc_mask;
-		encoder->possible_clones = intel_connector_clones(dev, clone_mask);
+		encoder->possible_crtcs = intel_output->crtc_mask;
+		encoder->possible_clones = intel_connector_clones(dev,
+						intel_output->clone_mask);
 	}
 }
 
@@ -2639,6 +3377,9 @@ void intel_modeset_init(struct drm_device *dev)
 	if (IS_I965G(dev)) {
 		dev->mode_config.max_width = 8192;
 		dev->mode_config.max_height = 8192;
+	} else if (IS_I9XX(dev)) {
+		dev->mode_config.max_width = 4096;
+		dev->mode_config.max_height = 4096;
 	} else {
 		dev->mode_config.max_width = 2048;
 		dev->mode_config.max_height = 2048;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
new file mode 100644
index 00000000000..2b914d73207
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -0,0 +1,1330 @@
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Keith Packard <keithp@keithp.com>
+ *
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "intel_dp.h"
+
+#define DP_LINK_STATUS_SIZE	6
+#define DP_LINK_CHECK_TIMEOUT	(10 * 1000)
+
+#define DP_LINK_CONFIGURATION_SIZE	9
+
+#define IS_eDP(i) ((i)->type == INTEL_OUTPUT_EDP)
+
+struct intel_dp_priv {
+	uint32_t output_reg;
+	uint32_t DP;
+	uint8_t  link_configuration[DP_LINK_CONFIGURATION_SIZE];
+	uint32_t save_DP;
+	uint8_t  save_link_configuration[DP_LINK_CONFIGURATION_SIZE];
+	bool has_audio;
+	int dpms_mode;
+	uint8_t link_bw;
+	uint8_t lane_count;
+	uint8_t dpcd[4];
+	struct intel_output *intel_output;
+	struct i2c_adapter adapter;
+	struct i2c_algo_dp_aux_data algo;
+};
+
+static void
+intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+		    uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]);
+
+static void
+intel_dp_link_down(struct intel_output *intel_output, uint32_t DP);
+
+void
+intel_edp_link_config (struct intel_output *intel_output,
+		int *lane_num, int *link_bw)
+{
+	struct intel_dp_priv   *dp_priv = intel_output->dev_priv;
+
+	*lane_num = dp_priv->lane_count;
+	if (dp_priv->link_bw == DP_LINK_BW_1_62)
+		*link_bw = 162000;
+	else if (dp_priv->link_bw == DP_LINK_BW_2_7)
+		*link_bw = 270000;
+}
+
+static int
+intel_dp_max_lane_count(struct intel_output *intel_output)
+{
+	struct intel_dp_priv   *dp_priv = intel_output->dev_priv;
+	int max_lane_count = 4;
+
+	if (dp_priv->dpcd[0] >= 0x11) {
+		max_lane_count = dp_priv->dpcd[2] & 0x1f;
+		switch (max_lane_count) {
+		case 1: case 2: case 4:
+			break;
+		default:
+			max_lane_count = 4;
+		}
+	}
+	return max_lane_count;
+}
+
+static int
+intel_dp_max_link_bw(struct intel_output *intel_output)
+{
+	struct intel_dp_priv   *dp_priv = intel_output->dev_priv;
+	int max_link_bw = dp_priv->dpcd[1];
+
+	switch (max_link_bw) {
+	case DP_LINK_BW_1_62:
+	case DP_LINK_BW_2_7:
+		break;
+	default:
+		max_link_bw = DP_LINK_BW_1_62;
+		break;
+	}
+	return max_link_bw;
+}
+
+static int
+intel_dp_link_clock(uint8_t link_bw)
+{
+	if (link_bw == DP_LINK_BW_2_7)
+		return 270000;
+	else
+		return 162000;
+}
+
+/* I think this is a fiction */
+static int
+intel_dp_link_required(int pixel_clock)
+{
+	return pixel_clock * 3;
+}
+
+static int
+intel_dp_mode_valid(struct drm_connector *connector,
+		    struct drm_display_mode *mode)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output));
+	int max_lanes = intel_dp_max_lane_count(intel_output);
+
+	if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes)
+		return MODE_CLOCK_HIGH;
+
+	if (mode->clock < 10000)
+		return MODE_CLOCK_LOW;
+
+	return MODE_OK;
+}
+
+static uint32_t
+pack_aux(uint8_t *src, int src_bytes)
+{
+	int	i;
+	uint32_t v = 0;
+
+	if (src_bytes > 4)
+		src_bytes = 4;
+	for (i = 0; i < src_bytes; i++)
+		v |= ((uint32_t) src[i]) << ((3-i) * 8);
+	return v;
+}
+
+static void
+unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes)
+{
+	int i;
+	if (dst_bytes > 4)
+		dst_bytes = 4;
+	for (i = 0; i < dst_bytes; i++)
+		dst[i] = src >> ((3-i) * 8);
+}
+
+/* hrawclock is 1/4 the FSB frequency */
+static int
+intel_hrawclk(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t clkcfg;
+
+	clkcfg = I915_READ(CLKCFG);
+	switch (clkcfg & CLKCFG_FSB_MASK) {
+	case CLKCFG_FSB_400:
+		return 100;
+	case CLKCFG_FSB_533:
+		return 133;
+	case CLKCFG_FSB_667:
+		return 166;
+	case CLKCFG_FSB_800:
+		return 200;
+	case CLKCFG_FSB_1067:
+		return 266;
+	case CLKCFG_FSB_1333:
+		return 333;
+	/* these two are just a guess; one of them might be right */
+	case CLKCFG_FSB_1600:
+	case CLKCFG_FSB_1600_ALT:
+		return 400;
+	default:
+		return 133;
+	}
+}
+
+static int
+intel_dp_aux_ch(struct intel_output *intel_output,
+		uint8_t *send, int send_bytes,
+		uint8_t *recv, int recv_size)
+{
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	uint32_t output_reg = dp_priv->output_reg;
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t ch_ctl = output_reg + 0x10;
+	uint32_t ch_data = ch_ctl + 4;
+	int i;
+	int recv_bytes;
+	uint32_t ctl;
+	uint32_t status;
+	uint32_t aux_clock_divider;
+	int try;
+
+	/* The clock divider is based off the hrawclk,
+	 * and would like to run at 2MHz. So, take the
+	 * hrawclk value and divide by 2 and use that
+	 */
+	if (IS_eDP(intel_output))
+		aux_clock_divider = 225; /* eDP input clock at 450Mhz */
+	else if (IS_IGDNG(dev))
+		aux_clock_divider = 62; /* IGDNG: input clock fixed at 125Mhz */
+	else
+		aux_clock_divider = intel_hrawclk(dev) / 2;
+
+	/* Must try at least 3 times according to DP spec */
+	for (try = 0; try < 5; try++) {
+		/* Load the send data into the aux channel data registers */
+		for (i = 0; i < send_bytes; i += 4) {
+			uint32_t    d = pack_aux(send + i, send_bytes - i);;
+	
+			I915_WRITE(ch_data + i, d);
+		}
+	
+		ctl = (DP_AUX_CH_CTL_SEND_BUSY |
+		       DP_AUX_CH_CTL_TIME_OUT_400us |
+		       (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+		       (5 << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
+		       (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) |
+		       DP_AUX_CH_CTL_DONE |
+		       DP_AUX_CH_CTL_TIME_OUT_ERROR |
+		       DP_AUX_CH_CTL_RECEIVE_ERROR);
+	
+		/* Send the command and wait for it to complete */
+		I915_WRITE(ch_ctl, ctl);
+		(void) I915_READ(ch_ctl);
+		for (;;) {
+			udelay(100);
+			status = I915_READ(ch_ctl);
+			if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+				break;
+		}
+	
+		/* Clear done status and any errors */
+		I915_WRITE(ch_ctl, (status |
+				DP_AUX_CH_CTL_DONE |
+				DP_AUX_CH_CTL_TIME_OUT_ERROR |
+				DP_AUX_CH_CTL_RECEIVE_ERROR));
+		(void) I915_READ(ch_ctl);
+		if ((status & DP_AUX_CH_CTL_TIME_OUT_ERROR) == 0)
+			break;
+	}
+
+	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
+		DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
+		return -EBUSY;
+	}
+
+	/* Check for timeout or receive error.
+	 * Timeouts occur when the sink is not connected
+	 */
+	if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
+		DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
+		return -EIO;
+	}
+
+	/* Timeouts occur when the device isn't connected, so they're
+	 * "normal" -- don't fill the kernel log with these */
+	if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
+		DRM_DEBUG("dp_aux_ch timeout status 0x%08x\n", status);
+		return -ETIMEDOUT;
+	}
+
+	/* Unload any bytes sent back from the other side */
+	recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >>
+		      DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
+
+	if (recv_bytes > recv_size)
+		recv_bytes = recv_size;
+	
+	for (i = 0; i < recv_bytes; i += 4) {
+		uint32_t    d = I915_READ(ch_data + i);
+
+		unpack_aux(d, recv + i, recv_bytes - i);
+	}
+
+	return recv_bytes;
+}
+
+/* Write data to the aux channel in native mode */
+static int
+intel_dp_aux_native_write(struct intel_output *intel_output,
+			  uint16_t address, uint8_t *send, int send_bytes)
+{
+	int ret;
+	uint8_t	msg[20];
+	int msg_bytes;
+	uint8_t	ack;
+
+	if (send_bytes > 16)
+		return -1;
+	msg[0] = AUX_NATIVE_WRITE << 4;
+	msg[1] = address >> 8;
+	msg[2] = address & 0xff;
+	msg[3] = send_bytes - 1;
+	memcpy(&msg[4], send, send_bytes);
+	msg_bytes = send_bytes + 4;
+	for (;;) {
+		ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, &ack, 1);
+		if (ret < 0)
+			return ret;
+		if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
+			break;
+		else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+			udelay(100);
+		else
+			return -EIO;
+	}
+	return send_bytes;
+}
+
+/* Write a single byte to the aux channel in native mode */
+static int
+intel_dp_aux_native_write_1(struct intel_output *intel_output,
+			    uint16_t address, uint8_t byte)
+{
+	return intel_dp_aux_native_write(intel_output, address, &byte, 1);
+}
+
+/* read bytes from a native aux channel */
+static int
+intel_dp_aux_native_read(struct intel_output *intel_output,
+			 uint16_t address, uint8_t *recv, int recv_bytes)
+{
+	uint8_t msg[4];
+	int msg_bytes;
+	uint8_t reply[20];
+	int reply_bytes;
+	uint8_t ack;
+	int ret;
+
+	msg[0] = AUX_NATIVE_READ << 4;
+	msg[1] = address >> 8;
+	msg[2] = address & 0xff;
+	msg[3] = recv_bytes - 1;
+
+	msg_bytes = 4;
+	reply_bytes = recv_bytes + 1;
+
+	for (;;) {
+		ret = intel_dp_aux_ch(intel_output, msg, msg_bytes,
+				      reply, reply_bytes);
+		if (ret == 0)
+			return -EPROTO;
+		if (ret < 0)
+			return ret;
+		ack = reply[0];
+		if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) {
+			memcpy(recv, reply + 1, ret - 1);
+			return ret - 1;
+		}
+		else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+			udelay(100);
+		else
+			return -EIO;
+	}
+}
+
+static int
+intel_dp_i2c_aux_ch(struct i2c_adapter *adapter,
+		    uint8_t *send, int send_bytes,
+		    uint8_t *recv, int recv_bytes)
+{
+	struct intel_dp_priv *dp_priv = container_of(adapter,
+						     struct intel_dp_priv,
+						     adapter);
+	struct intel_output *intel_output = dp_priv->intel_output;
+
+	return intel_dp_aux_ch(intel_output,
+			       send, send_bytes, recv, recv_bytes);
+}
+
+static int
+intel_dp_i2c_init(struct intel_output *intel_output, const char *name)
+{
+	struct intel_dp_priv   *dp_priv = intel_output->dev_priv;
+
+	DRM_ERROR("i2c_init %s\n", name);
+	dp_priv->algo.running = false;
+	dp_priv->algo.address = 0;
+	dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch;
+
+	memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter));
+	dp_priv->adapter.owner = THIS_MODULE;
+	dp_priv->adapter.class = I2C_CLASS_DDC;
+	strncpy (dp_priv->adapter.name, name, sizeof(dp_priv->adapter.name) - 1);
+	dp_priv->adapter.name[sizeof(dp_priv->adapter.name) - 1] = '\0';
+	dp_priv->adapter.algo_data = &dp_priv->algo;
+	dp_priv->adapter.dev.parent = &intel_output->base.kdev;
+	
+	return i2c_dp_aux_add_bus(&dp_priv->adapter);
+}
+
+static bool
+intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
+		    struct drm_display_mode *adjusted_mode)
+{
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_dp_priv   *dp_priv = intel_output->dev_priv;
+	int lane_count, clock;
+	int max_lane_count = intel_dp_max_lane_count(intel_output);
+	int max_clock = intel_dp_max_link_bw(intel_output) == DP_LINK_BW_2_7 ? 1 : 0;
+	static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
+
+	for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
+		for (clock = 0; clock <= max_clock; clock++) {
+			int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
+
+			if (intel_dp_link_required(mode->clock) <= link_avail) {
+				dp_priv->link_bw = bws[clock];
+				dp_priv->lane_count = lane_count;
+				adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
+				DRM_DEBUG("Display port link bw %02x lane count %d clock %d\n",
+				       dp_priv->link_bw, dp_priv->lane_count,
+				       adjusted_mode->clock);
+				return true;
+			}
+		}
+	}
+	return false;
+}
+
+struct intel_dp_m_n {
+	uint32_t	tu;
+	uint32_t	gmch_m;
+	uint32_t	gmch_n;
+	uint32_t	link_m;
+	uint32_t	link_n;
+};
+
+static void
+intel_reduce_ratio(uint32_t *num, uint32_t *den)
+{
+	while (*num > 0xffffff || *den > 0xffffff) {
+		*num >>= 1;
+		*den >>= 1;
+	}
+}
+
+static void
+intel_dp_compute_m_n(int bytes_per_pixel,
+		     int nlanes,
+		     int pixel_clock,
+		     int link_clock,
+		     struct intel_dp_m_n *m_n)
+{
+	m_n->tu = 64;
+	m_n->gmch_m = pixel_clock * bytes_per_pixel;
+	m_n->gmch_n = link_clock * nlanes;
+	intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
+	m_n->link_m = pixel_clock;
+	m_n->link_n = link_clock;
+	intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
+}
+
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+		 struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_connector *connector;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int lane_count = 4;
+	struct intel_dp_m_n m_n;
+
+	/*
+	 * Find the lane count in the intel_output private
+	 */
+	list_for_each_entry(connector, &mode_config->connector_list, head) {
+		struct intel_output *intel_output = to_intel_output(connector);
+		struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+		if (!connector->encoder || connector->encoder->crtc != crtc)
+			continue;
+
+		if (intel_output->type == INTEL_OUTPUT_DISPLAYPORT) {
+			lane_count = dp_priv->lane_count;
+			break;
+		}
+	}
+
+	/*
+	 * Compute the GMCH and Link ratios. The '3' here is
+	 * the number of bytes_per_pixel post-LUT, which we always
+	 * set up for 8-bits of R/G/B, or 3 bytes total.
+	 */
+	intel_dp_compute_m_n(3, lane_count,
+			     mode->clock, adjusted_mode->clock, &m_n);
+
+	if (IS_IGDNG(dev)) {
+		if (intel_crtc->pipe == 0) {
+			I915_WRITE(TRANSA_DATA_M1,
+				   ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+				   m_n.gmch_m);
+			I915_WRITE(TRANSA_DATA_N1, m_n.gmch_n);
+			I915_WRITE(TRANSA_DP_LINK_M1, m_n.link_m);
+			I915_WRITE(TRANSA_DP_LINK_N1, m_n.link_n);
+		} else {
+			I915_WRITE(TRANSB_DATA_M1,
+				   ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+				   m_n.gmch_m);
+			I915_WRITE(TRANSB_DATA_N1, m_n.gmch_n);
+			I915_WRITE(TRANSB_DP_LINK_M1, m_n.link_m);
+			I915_WRITE(TRANSB_DP_LINK_N1, m_n.link_n);
+		}
+	} else {
+		if (intel_crtc->pipe == 0) {
+			I915_WRITE(PIPEA_GMCH_DATA_M,
+				   ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+				   m_n.gmch_m);
+			I915_WRITE(PIPEA_GMCH_DATA_N,
+				   m_n.gmch_n);
+			I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m);
+			I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n);
+		} else {
+			I915_WRITE(PIPEB_GMCH_DATA_M,
+				   ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+				   m_n.gmch_m);
+			I915_WRITE(PIPEB_GMCH_DATA_N,
+					m_n.gmch_n);
+			I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m);
+			I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n);
+		}
+	}
+}
+
+static void
+intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
+		  struct drm_display_mode *adjusted_mode)
+{
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	struct drm_crtc *crtc = intel_output->enc.crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	dp_priv->DP = (DP_LINK_TRAIN_OFF |
+			DP_VOLTAGE_0_4 |
+			DP_PRE_EMPHASIS_0 |
+			DP_SYNC_VS_HIGH |
+			DP_SYNC_HS_HIGH);
+
+	switch (dp_priv->lane_count) {
+	case 1:
+		dp_priv->DP |= DP_PORT_WIDTH_1;
+		break;
+	case 2:
+		dp_priv->DP |= DP_PORT_WIDTH_2;
+		break;
+	case 4:
+		dp_priv->DP |= DP_PORT_WIDTH_4;
+		break;
+	}
+	if (dp_priv->has_audio)
+		dp_priv->DP |= DP_AUDIO_OUTPUT_ENABLE;
+
+	memset(dp_priv->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
+	dp_priv->link_configuration[0] = dp_priv->link_bw;
+	dp_priv->link_configuration[1] = dp_priv->lane_count;
+
+	/*
+	 * Check for DPCD version > 1.1,
+	 * enable enahanced frame stuff in that case
+	 */
+	if (dp_priv->dpcd[0] >= 0x11) {
+		dp_priv->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+		dp_priv->DP |= DP_ENHANCED_FRAMING;
+	}
+
+	if (intel_crtc->pipe == 1)
+		dp_priv->DP |= DP_PIPEB_SELECT;
+
+	if (IS_eDP(intel_output)) {
+		/* don't miss out required setting for eDP */
+		dp_priv->DP |= DP_PLL_ENABLE;
+		if (adjusted_mode->clock < 200000)
+			dp_priv->DP |= DP_PLL_FREQ_160MHZ;
+		else
+			dp_priv->DP |= DP_PLL_FREQ_270MHZ;
+	}
+}
+
+static void igdng_edp_backlight_on (struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp;
+
+	DRM_DEBUG("\n");
+	pp = I915_READ(PCH_PP_CONTROL);
+	pp |= EDP_BLC_ENABLE;
+	I915_WRITE(PCH_PP_CONTROL, pp);
+}
+
+static void igdng_edp_backlight_off (struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp;
+
+	DRM_DEBUG("\n");
+	pp = I915_READ(PCH_PP_CONTROL);
+	pp &= ~EDP_BLC_ENABLE;
+	I915_WRITE(PCH_PP_CONTROL, pp);
+}
+
+static void
+intel_dp_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t dp_reg = I915_READ(dp_priv->output_reg);
+
+	if (mode != DRM_MODE_DPMS_ON) {
+		if (dp_reg & DP_PORT_EN) {
+			intel_dp_link_down(intel_output, dp_priv->DP);
+			if (IS_eDP(intel_output))
+				igdng_edp_backlight_off(dev);
+		}
+	} else {
+		if (!(dp_reg & DP_PORT_EN)) {
+			intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+			if (IS_eDP(intel_output))
+				igdng_edp_backlight_on(dev);
+		}
+	}
+	dp_priv->dpms_mode = mode;
+}
+
+/*
+ * Fetch AUX CH registers 0x202 - 0x207 which contain
+ * link status information
+ */
+static bool
+intel_dp_get_link_status(struct intel_output *intel_output,
+			 uint8_t link_status[DP_LINK_STATUS_SIZE])
+{
+	int ret;
+
+	ret = intel_dp_aux_native_read(intel_output,
+				       DP_LANE0_1_STATUS,
+				       link_status, DP_LINK_STATUS_SIZE);
+	if (ret != DP_LINK_STATUS_SIZE)
+		return false;
+	return true;
+}
+
+static uint8_t
+intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+		     int r)
+{
+	return link_status[r - DP_LANE0_1_STATUS];
+}
+
+static void
+intel_dp_save(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+	dp_priv->save_DP = I915_READ(dp_priv->output_reg);
+	intel_dp_aux_native_read(intel_output, DP_LINK_BW_SET,
+				 dp_priv->save_link_configuration,
+				 sizeof (dp_priv->save_link_configuration));
+}
+
+static uint8_t
+intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE],
+				 int lane)
+{
+	int	    i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+	int	    s = ((lane & 1) ?
+			 DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
+			 DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
+	uint8_t l = intel_dp_link_status(link_status, i);
+
+	return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
+}
+
+static uint8_t
+intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE],
+				      int lane)
+{
+	int	    i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+	int	    s = ((lane & 1) ?
+			 DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
+			 DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
+	uint8_t l = intel_dp_link_status(link_status, i);
+
+	return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
+}
+
+
+#if 0
+static char	*voltage_names[] = {
+	"0.4V", "0.6V", "0.8V", "1.2V"
+};
+static char	*pre_emph_names[] = {
+	"0dB", "3.5dB", "6dB", "9.5dB"
+};
+static char	*link_train_names[] = {
+	"pattern 1", "pattern 2", "idle", "off"
+};
+#endif
+
+/*
+ * These are source-specific values; current Intel hardware supports
+ * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
+ */
+#define I830_DP_VOLTAGE_MAX	    DP_TRAIN_VOLTAGE_SWING_800
+
+static uint8_t
+intel_dp_pre_emphasis_max(uint8_t voltage_swing)
+{
+	switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+	case DP_TRAIN_VOLTAGE_SWING_400:
+		return DP_TRAIN_PRE_EMPHASIS_6;
+	case DP_TRAIN_VOLTAGE_SWING_600:
+		return DP_TRAIN_PRE_EMPHASIS_6;
+	case DP_TRAIN_VOLTAGE_SWING_800:
+		return DP_TRAIN_PRE_EMPHASIS_3_5;
+	case DP_TRAIN_VOLTAGE_SWING_1200:
+	default:
+		return DP_TRAIN_PRE_EMPHASIS_0;
+	}
+}
+
+static void
+intel_get_adjust_train(struct intel_output *intel_output,
+		       uint8_t link_status[DP_LINK_STATUS_SIZE],
+		       int lane_count,
+		       uint8_t train_set[4])
+{
+	uint8_t v = 0;
+	uint8_t p = 0;
+	int lane;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		uint8_t this_v = intel_get_adjust_request_voltage(link_status, lane);
+		uint8_t this_p = intel_get_adjust_request_pre_emphasis(link_status, lane);
+
+		if (this_v > v)
+			v = this_v;
+		if (this_p > p)
+			p = this_p;
+	}
+
+	if (v >= I830_DP_VOLTAGE_MAX)
+		v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
+
+	if (p >= intel_dp_pre_emphasis_max(v))
+		p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+	for (lane = 0; lane < 4; lane++)
+		train_set[lane] = v | p;
+}
+
+static uint32_t
+intel_dp_signal_levels(uint8_t train_set, int lane_count)
+{
+	uint32_t	signal_levels = 0;
+
+	switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
+	case DP_TRAIN_VOLTAGE_SWING_400:
+	default:
+		signal_levels |= DP_VOLTAGE_0_4;
+		break;
+	case DP_TRAIN_VOLTAGE_SWING_600:
+		signal_levels |= DP_VOLTAGE_0_6;
+		break;
+	case DP_TRAIN_VOLTAGE_SWING_800:
+		signal_levels |= DP_VOLTAGE_0_8;
+		break;
+	case DP_TRAIN_VOLTAGE_SWING_1200:
+		signal_levels |= DP_VOLTAGE_1_2;
+		break;
+	}
+	switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
+	case DP_TRAIN_PRE_EMPHASIS_0:
+	default:
+		signal_levels |= DP_PRE_EMPHASIS_0;
+		break;
+	case DP_TRAIN_PRE_EMPHASIS_3_5:
+		signal_levels |= DP_PRE_EMPHASIS_3_5;
+		break;
+	case DP_TRAIN_PRE_EMPHASIS_6:
+		signal_levels |= DP_PRE_EMPHASIS_6;
+		break;
+	case DP_TRAIN_PRE_EMPHASIS_9_5:
+		signal_levels |= DP_PRE_EMPHASIS_9_5;
+		break;
+	}
+	return signal_levels;
+}
+
+static uint8_t
+intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+		      int lane)
+{
+	int i = DP_LANE0_1_STATUS + (lane >> 1);
+	int s = (lane & 1) * 4;
+	uint8_t l = intel_dp_link_status(link_status, i);
+
+	return (l >> s) & 0xf;
+}
+
+/* Check for clock recovery is done on all channels */
+static bool
+intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+	int lane;
+	uint8_t lane_status;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = intel_get_lane_status(link_status, lane);
+		if ((lane_status & DP_LANE_CR_DONE) == 0)
+			return false;
+	}
+	return true;
+}
+
+/* Check to see if channel eq is done on all channels */
+#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\
+			 DP_LANE_CHANNEL_EQ_DONE|\
+			 DP_LANE_SYMBOL_LOCKED)
+static bool
+intel_channel_eq_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+	uint8_t lane_align;
+	uint8_t lane_status;
+	int lane;
+
+	lane_align = intel_dp_link_status(link_status,
+					  DP_LANE_ALIGN_STATUS_UPDATED);
+	if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
+		return false;
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = intel_get_lane_status(link_status, lane);
+		if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS)
+			return false;
+	}
+	return true;
+}
+
+static bool
+intel_dp_set_link_train(struct intel_output *intel_output,
+			uint32_t dp_reg_value,
+			uint8_t dp_train_pat,
+			uint8_t train_set[4],
+			bool first)
+{
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	int ret;
+
+	I915_WRITE(dp_priv->output_reg, dp_reg_value);
+	POSTING_READ(dp_priv->output_reg);
+	if (first)
+		intel_wait_for_vblank(dev);
+
+	intel_dp_aux_native_write_1(intel_output,
+				    DP_TRAINING_PATTERN_SET,
+				    dp_train_pat);
+
+	ret = intel_dp_aux_native_write(intel_output,
+					DP_TRAINING_LANE0_SET, train_set, 4);
+	if (ret != 4)
+		return false;
+
+	return true;
+}
+
+static void
+intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+		    uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE])
+{
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	uint8_t	train_set[4];
+	uint8_t link_status[DP_LINK_STATUS_SIZE];
+	int i;
+	uint8_t voltage;
+	bool clock_recovery = false;
+	bool channel_eq = false;
+	bool first = true;
+	int tries;
+
+	/* Write the link configuration data */
+	intel_dp_aux_native_write(intel_output, 0x100,
+				  link_configuration, DP_LINK_CONFIGURATION_SIZE);
+
+	DP |= DP_PORT_EN;
+	DP &= ~DP_LINK_TRAIN_MASK;
+	memset(train_set, 0, 4);
+	voltage = 0xff;
+	tries = 0;
+	clock_recovery = false;
+	for (;;) {
+		/* Use train_set[0] to set the voltage and pre emphasis values */
+		uint32_t    signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
+		DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+
+		if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_1,
+					     DP_TRAINING_PATTERN_1, train_set, first))
+			break;
+		first = false;
+		/* Set training pattern 1 */
+
+		udelay(100);
+		if (!intel_dp_get_link_status(intel_output, link_status))
+			break;
+
+		if (intel_clock_recovery_ok(link_status, dp_priv->lane_count)) {
+			clock_recovery = true;
+			break;
+		}
+
+		/* Check to see if we've tried the max voltage */
+		for (i = 0; i < dp_priv->lane_count; i++)
+			if ((train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
+				break;
+		if (i == dp_priv->lane_count)
+			break;
+
+		/* Check to see if we've tried the same voltage 5 times */
+		if ((train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
+			++tries;
+			if (tries == 5)
+				break;
+		} else
+			tries = 0;
+		voltage = train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+
+		/* Compute new train_set as requested by target */
+		intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+	}
+
+	/* channel equalization */
+	tries = 0;
+	channel_eq = false;
+	for (;;) {
+		/* Use train_set[0] to set the voltage and pre emphasis values */
+		uint32_t    signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
+		DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+
+		/* channel eq pattern */
+		if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_2,
+					     DP_TRAINING_PATTERN_2, train_set,
+					     false))
+			break;
+
+		udelay(400);
+		if (!intel_dp_get_link_status(intel_output, link_status))
+			break;
+
+		if (intel_channel_eq_ok(link_status, dp_priv->lane_count)) {
+			channel_eq = true;
+			break;
+		}
+
+		/* Try 5 times */
+		if (tries > 5)
+			break;
+
+		/* Compute new train_set as requested by target */
+		intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+		++tries;
+	}
+
+	I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_OFF);
+	POSTING_READ(dp_priv->output_reg);
+	intel_dp_aux_native_write_1(intel_output,
+				    DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE);
+}
+
+static void
+intel_dp_link_down(struct intel_output *intel_output, uint32_t DP)
+{
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+	DRM_DEBUG("\n");
+
+	if (IS_eDP(intel_output)) {
+		DP &= ~DP_PLL_ENABLE;
+		I915_WRITE(dp_priv->output_reg, DP);
+		POSTING_READ(dp_priv->output_reg);
+		udelay(100);
+	}
+
+	DP &= ~DP_LINK_TRAIN_MASK;
+	I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE);
+	POSTING_READ(dp_priv->output_reg);
+
+	udelay(17000);
+
+	if (IS_eDP(intel_output))
+		DP |= DP_LINK_TRAIN_OFF;
+	I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN);
+	POSTING_READ(dp_priv->output_reg);
+}
+
+static void
+intel_dp_restore(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+	if (dp_priv->save_DP & DP_PORT_EN)
+		intel_dp_link_train(intel_output, dp_priv->save_DP, dp_priv->save_link_configuration);
+	else
+		intel_dp_link_down(intel_output,  dp_priv->save_DP);
+}
+
+/*
+ * According to DP spec
+ * 5.1.2:
+ *  1. Read DPCD
+ *  2. Configure link according to Receiver Capabilities
+ *  3. Use Link Training from 2.5.3.3 and 3.5.1.3
+ *  4. Check link status on receipt of hot-plug interrupt
+ */
+
+static void
+intel_dp_check_link_status(struct intel_output *intel_output)
+{
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	uint8_t link_status[DP_LINK_STATUS_SIZE];
+
+	if (!intel_output->enc.crtc)
+		return;
+
+	if (!intel_dp_get_link_status(intel_output, link_status)) {
+		intel_dp_link_down(intel_output, dp_priv->DP);
+		return;
+	}
+
+	if (!intel_channel_eq_ok(link_status, dp_priv->lane_count))
+		intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+}
+
+static enum drm_connector_status
+igdng_dp_detect(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	enum drm_connector_status status;
+
+	status = connector_status_disconnected;
+	if (intel_dp_aux_native_read(intel_output,
+				     0x000, dp_priv->dpcd,
+				     sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
+	{
+		if (dp_priv->dpcd[0] != 0)
+			status = connector_status_connected;
+	}
+	return status;
+}
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
+ *
+ * \return true if DP port is connected.
+ * \return false if DP port is disconnected.
+ */
+static enum drm_connector_status
+intel_dp_detect(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	uint32_t temp, bit;
+	enum drm_connector_status status;
+
+	dp_priv->has_audio = false;
+
+	if (IS_IGDNG(dev))
+		return igdng_dp_detect(connector);
+
+	temp = I915_READ(PORT_HOTPLUG_EN);
+
+	I915_WRITE(PORT_HOTPLUG_EN,
+	       temp |
+	       DPB_HOTPLUG_INT_EN |
+	       DPC_HOTPLUG_INT_EN |
+	       DPD_HOTPLUG_INT_EN);
+
+	POSTING_READ(PORT_HOTPLUG_EN);
+
+	switch (dp_priv->output_reg) {
+	case DP_B:
+		bit = DPB_HOTPLUG_INT_STATUS;
+		break;
+	case DP_C:
+		bit = DPC_HOTPLUG_INT_STATUS;
+		break;
+	case DP_D:
+		bit = DPD_HOTPLUG_INT_STATUS;
+		break;
+	default:
+		return connector_status_unknown;
+	}
+
+	temp = I915_READ(PORT_HOTPLUG_STAT);
+
+	if ((temp & bit) == 0)
+		return connector_status_disconnected;
+
+	status = connector_status_disconnected;
+	if (intel_dp_aux_native_read(intel_output,
+				     0x000, dp_priv->dpcd,
+				     sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
+	{
+		if (dp_priv->dpcd[0] != 0)
+			status = connector_status_connected;
+	}
+	return status;
+}
+
+static int intel_dp_get_modes(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	/* We should parse the EDID data and find out if it has an audio sink
+	 */
+
+	ret = intel_ddc_get_modes(intel_output);
+	if (ret)
+		return ret;
+
+	/* if eDP has no EDID, try to use fixed panel mode from VBT */
+	if (IS_eDP(intel_output)) {
+		if (dev_priv->panel_fixed_mode != NULL) {
+			struct drm_display_mode *mode;
+			mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
+			drm_mode_probed_add(connector, mode);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static void
+intel_dp_destroy (struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	if (intel_output->i2c_bus)
+		intel_i2c_destroy(intel_output->i2c_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(intel_output);
+}
+
+static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
+	.dpms = intel_dp_dpms,
+	.mode_fixup = intel_dp_mode_fixup,
+	.prepare = intel_encoder_prepare,
+	.mode_set = intel_dp_mode_set,
+	.commit = intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs intel_dp_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.save = intel_dp_save,
+	.restore = intel_dp_restore,
+	.detect = intel_dp_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = intel_dp_destroy,
+};
+
+static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = {
+	.get_modes = intel_dp_get_modes,
+	.mode_valid = intel_dp_mode_valid,
+	.best_encoder = intel_best_encoder,
+};
+
+static void intel_dp_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs intel_dp_enc_funcs = {
+	.destroy = intel_dp_enc_destroy,
+};
+
+void
+intel_dp_hot_plug(struct intel_output *intel_output)
+{
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+	if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON)
+		intel_dp_check_link_status(intel_output);
+}
+
+void
+intel_dp_init(struct drm_device *dev, int output_reg)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_connector *connector;
+	struct intel_output *intel_output;
+	struct intel_dp_priv *dp_priv;
+	const char *name = NULL;
+
+	intel_output = kcalloc(sizeof(struct intel_output) + 
+			       sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
+	if (!intel_output)
+		return;
+
+	dp_priv = (struct intel_dp_priv *)(intel_output + 1);
+
+	connector = &intel_output->base;
+	drm_connector_init(dev, connector, &intel_dp_connector_funcs,
+			   DRM_MODE_CONNECTOR_DisplayPort);
+	drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
+
+	if (output_reg == DP_A)
+		intel_output->type = INTEL_OUTPUT_EDP;
+	else
+		intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
+
+	if (output_reg == DP_B)
+		intel_output->clone_mask = (1 << INTEL_DP_B_CLONE_BIT);
+	else if (output_reg == DP_C)
+		intel_output->clone_mask = (1 << INTEL_DP_C_CLONE_BIT);
+	else if (output_reg == DP_D)
+		intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
+
+	if (IS_eDP(intel_output)) {
+		intel_output->crtc_mask = (1 << 1);
+		intel_output->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
+	} else
+		intel_output->crtc_mask = (1 << 0) | (1 << 1);
+	connector->interlace_allowed = true;
+	connector->doublescan_allowed = 0;
+
+	dp_priv->intel_output = intel_output;
+	dp_priv->output_reg = output_reg;
+	dp_priv->has_audio = false;
+	dp_priv->dpms_mode = DRM_MODE_DPMS_ON;
+	intel_output->dev_priv = dp_priv;
+
+	drm_encoder_init(dev, &intel_output->enc, &intel_dp_enc_funcs,
+			 DRM_MODE_ENCODER_TMDS);
+	drm_encoder_helper_add(&intel_output->enc, &intel_dp_helper_funcs);
+
+	drm_mode_connector_attach_encoder(&intel_output->base,
+					  &intel_output->enc);
+	drm_sysfs_connector_add(connector);
+
+	/* Set up the DDC bus. */
+	switch (output_reg) {
+		case DP_A:
+			name = "DPDDC-A";
+			break;
+		case DP_B:
+		case PCH_DP_B:
+			name = "DPDDC-B";
+			break;
+		case DP_C:
+		case PCH_DP_C:
+			name = "DPDDC-C";
+			break;
+		case DP_D:
+		case PCH_DP_D:
+			name = "DPDDC-D";
+			break;
+	}
+
+	intel_dp_i2c_init(intel_output, name);
+
+	intel_output->ddc_bus = &dp_priv->adapter;
+	intel_output->hot_plug = intel_dp_hot_plug;
+
+	if (output_reg == DP_A) {
+		/* initialize panel mode from VBT if available for eDP */
+		if (dev_priv->lfp_lvds_vbt_mode) {
+			dev_priv->panel_fixed_mode =
+				drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
+			if (dev_priv->panel_fixed_mode) {
+				dev_priv->panel_fixed_mode->type |=
+					DRM_MODE_TYPE_PREFERRED;
+			}
+		}
+	}
+
+	/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
+	 * 0xd.  Failure to do so will result in spurious interrupts being
+	 * generated on the port when a cable is not attached.
+	 */
+	if (IS_G4X(dev) && !IS_GM45(dev)) {
+		u32 temp = I915_READ(PEG_BAND_GAP_DATA);
+		I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
+	}
+}
diff --git a/drivers/gpu/drm/i915/intel_dp.h b/drivers/gpu/drm/i915/intel_dp.h
new file mode 100644
index 00000000000..2b38054d3b6
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright © 2008 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _INTEL_DP_H_
+#define _INTEL_DP_H_
+
+/* From the VESA DisplayPort spec */
+
+#define AUX_NATIVE_WRITE	0x8
+#define AUX_NATIVE_READ		0x9
+#define AUX_I2C_WRITE		0x0
+#define AUX_I2C_READ		0x1
+#define AUX_I2C_STATUS		0x2
+#define AUX_I2C_MOT		0x4
+
+#define AUX_NATIVE_REPLY_ACK	(0x0 << 4)
+#define AUX_NATIVE_REPLY_NACK	(0x1 << 4)
+#define AUX_NATIVE_REPLY_DEFER	(0x2 << 4)
+#define AUX_NATIVE_REPLY_MASK	(0x3 << 4)
+
+#define AUX_I2C_REPLY_ACK	(0x0 << 6)
+#define AUX_I2C_REPLY_NACK	(0x1 << 6)
+#define AUX_I2C_REPLY_DEFER	(0x2 << 6)
+#define AUX_I2C_REPLY_MASK	(0x3 << 6)
+
+/* AUX CH addresses */
+#define	DP_LINK_BW_SET		0x100
+# define DP_LINK_BW_1_62		    0x06
+# define DP_LINK_BW_2_7			    0x0a
+
+#define DP_LANE_COUNT_SET	0x101
+# define DP_LANE_COUNT_MASK		    0x0f
+# define DP_LANE_COUNT_ENHANCED_FRAME_EN    (1 << 7)
+
+#define DP_TRAINING_PATTERN_SET	0x102
+
+# define DP_TRAINING_PATTERN_DISABLE	    0
+# define DP_TRAINING_PATTERN_1		    1
+# define DP_TRAINING_PATTERN_2		    2
+# define DP_TRAINING_PATTERN_MASK	    0x3
+
+# define DP_LINK_QUAL_PATTERN_DISABLE	    (0 << 2)
+# define DP_LINK_QUAL_PATTERN_D10_2	    (1 << 2)
+# define DP_LINK_QUAL_PATTERN_ERROR_RATE    (2 << 2)
+# define DP_LINK_QUAL_PATTERN_PRBS7	    (3 << 2)
+# define DP_LINK_QUAL_PATTERN_MASK	    (3 << 2)
+
+# define DP_RECOVERED_CLOCK_OUT_EN	    (1 << 4)
+# define DP_LINK_SCRAMBLING_DISABLE	    (1 << 5)
+
+# define DP_SYMBOL_ERROR_COUNT_BOTH	    (0 << 6)
+# define DP_SYMBOL_ERROR_COUNT_DISPARITY    (1 << 6)
+# define DP_SYMBOL_ERROR_COUNT_SYMBOL	    (2 << 6)
+# define DP_SYMBOL_ERROR_COUNT_MASK	    (3 << 6)
+
+#define DP_TRAINING_LANE0_SET		    0x103
+#define DP_TRAINING_LANE1_SET		    0x104
+#define DP_TRAINING_LANE2_SET		    0x105
+#define DP_TRAINING_LANE3_SET		    0x106
+
+# define DP_TRAIN_VOLTAGE_SWING_MASK	    0x3
+# define DP_TRAIN_VOLTAGE_SWING_SHIFT	    0
+# define DP_TRAIN_MAX_SWING_REACHED	    (1 << 2)
+# define DP_TRAIN_VOLTAGE_SWING_400	    (0 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_600	    (1 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_800	    (2 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_1200	    (3 << 0)
+
+# define DP_TRAIN_PRE_EMPHASIS_MASK	    (3 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_0	    (0 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_3_5	    (1 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_6	    (2 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_9_5	    (3 << 3)
+
+# define DP_TRAIN_PRE_EMPHASIS_SHIFT	    3
+# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED  (1 << 5)
+
+#define DP_DOWNSPREAD_CTRL		    0x107
+# define DP_SPREAD_AMP_0_5		    (1 << 4)
+
+#define DP_MAIN_LINK_CHANNEL_CODING_SET	    0x108
+# define DP_SET_ANSI_8B10B		    (1 << 0)
+
+#define DP_LANE0_1_STATUS		    0x202
+#define DP_LANE2_3_STATUS		    0x203
+
+# define DP_LANE_CR_DONE		    (1 << 0)
+# define DP_LANE_CHANNEL_EQ_DONE	    (1 << 1)
+# define DP_LANE_SYMBOL_LOCKED		    (1 << 2)
+
+#define DP_LANE_ALIGN_STATUS_UPDATED	    0x204
+
+#define DP_INTERLANE_ALIGN_DONE		    (1 << 0)
+#define DP_DOWNSTREAM_PORT_STATUS_CHANGED   (1 << 6)
+#define DP_LINK_STATUS_UPDATED		    (1 << 7)
+
+#define DP_SINK_STATUS			    0x205
+
+#define DP_RECEIVE_PORT_0_STATUS	    (1 << 0)
+#define DP_RECEIVE_PORT_1_STATUS	    (1 << 1)
+
+#define DP_ADJUST_REQUEST_LANE0_1	    0x206
+#define DP_ADJUST_REQUEST_LANE2_3	    0x207
+
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK  0x03
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK   0x0c
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT  2
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK  0x30
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK   0xc0
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT  6
+
+struct i2c_algo_dp_aux_data {
+	bool running;
+	u16 address;
+	int (*aux_ch) (struct i2c_adapter *adapter,
+		       uint8_t *send, int send_bytes,
+		       uint8_t *recv, int recv_bytes);
+};
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter);
+
+#endif /* _INTEL_DP_H_ */
diff --git a/drivers/gpu/drm/i915/intel_dp_i2c.c b/drivers/gpu/drm/i915/intel_dp_i2c.c
new file mode 100644
index 00000000000..a63b6f57d2d
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp_i2c.c
@@ -0,0 +1,273 @@
+/*
+ * Copyright © 2009 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include "intel_dp.h"
+#include "drmP.h"
+
+/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */
+
+#define MODE_I2C_START	1
+#define MODE_I2C_WRITE	2
+#define MODE_I2C_READ	4
+#define MODE_I2C_STOP	8
+
+static int
+i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
+			    uint8_t write_byte, uint8_t *read_byte)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	uint16_t address = algo_data->address;
+	uint8_t msg[5];
+	uint8_t reply[2];
+	int msg_bytes;
+	int reply_bytes;
+	int ret;
+
+	/* Set up the command byte */
+	if (mode & MODE_I2C_READ)
+		msg[0] = AUX_I2C_READ << 4;
+	else
+		msg[0] = AUX_I2C_WRITE << 4;
+
+	if (!(mode & MODE_I2C_STOP))
+		msg[0] |= AUX_I2C_MOT << 4;
+
+	msg[1] = address >> 8;
+	msg[2] = address;
+
+	switch (mode) {
+	case MODE_I2C_WRITE:
+		msg[3] = 0;
+		msg[4] = write_byte;
+		msg_bytes = 5;
+		reply_bytes = 1;
+		break;
+	case MODE_I2C_READ:
+		msg[3] = 0;
+		msg_bytes = 4;
+		reply_bytes = 2;
+		break;
+	default:
+		msg_bytes = 3;
+		reply_bytes = 1;
+		break;
+	}
+
+	for (;;) {
+		ret = (*algo_data->aux_ch)(adapter,
+					   msg, msg_bytes,
+					   reply, reply_bytes);
+		if (ret < 0) {
+			DRM_DEBUG("aux_ch failed %d\n", ret);
+			return ret;
+		}
+		switch (reply[0] & AUX_I2C_REPLY_MASK) {
+		case AUX_I2C_REPLY_ACK:
+			if (mode == MODE_I2C_READ) {
+				*read_byte = reply[1];
+			}
+			return reply_bytes - 1;
+		case AUX_I2C_REPLY_NACK:
+			DRM_DEBUG("aux_ch nack\n");
+			return -EREMOTEIO;
+		case AUX_I2C_REPLY_DEFER:
+			DRM_DEBUG("aux_ch defer\n");
+			udelay(100);
+			break;
+		default:
+			DRM_ERROR("aux_ch invalid reply 0x%02x\n", reply[0]);
+			return -EREMOTEIO;
+		}
+	}
+}
+
+/*
+ * I2C over AUX CH
+ */
+
+/*
+ * Send the address. If the I2C link is running, this 'restarts'
+ * the connection with the new address, this is used for doing
+ * a write followed by a read (as needed for DDC)
+ */
+static int
+i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int mode = MODE_I2C_START;
+	int ret;
+
+	if (reading)
+		mode |= MODE_I2C_READ;
+	else
+		mode |= MODE_I2C_WRITE;
+	algo_data->address = address;
+	algo_data->running = true;
+	ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+	return ret;
+}
+
+/*
+ * Stop the I2C transaction. This closes out the link, sending
+ * a bare address packet with the MOT bit turned off
+ */
+static void
+i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int mode = MODE_I2C_STOP;
+
+	if (reading)
+		mode |= MODE_I2C_READ;
+	else
+		mode |= MODE_I2C_WRITE;
+	if (algo_data->running) {
+		(void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+		algo_data->running = false;
+	}
+}
+
+/*
+ * Write a single byte to the current I2C address, the
+ * the I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int ret;
+
+	if (!algo_data->running)
+		return -EIO;
+
+	ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL);
+	return ret;
+}
+
+/*
+ * Read a single byte from the current I2C address, the
+ * I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int ret;
+
+	if (!algo_data->running)
+		return -EIO;
+
+	ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret);
+	return ret;
+}
+
+static int
+i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter,
+		     struct i2c_msg *msgs,
+		     int num)
+{
+	int ret = 0;
+	bool reading = false;
+	int m;
+	int b;
+
+	for (m = 0; m < num; m++) {
+		u16 len = msgs[m].len;
+		u8 *buf = msgs[m].buf;
+		reading = (msgs[m].flags & I2C_M_RD) != 0;
+		ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading);
+		if (ret < 0)
+			break;
+		if (reading) {
+			for (b = 0; b < len; b++) {
+				ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]);
+				if (ret < 0)
+					break;
+			}
+		} else {
+			for (b = 0; b < len; b++) {
+				ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]);
+				if (ret < 0)
+					break;
+			}
+		}
+		if (ret < 0)
+			break;
+	}
+	if (ret >= 0)
+		ret = num;
+	i2c_algo_dp_aux_stop(adapter, reading);
+	DRM_DEBUG("dp_aux_xfer return %d\n", ret);
+	return ret;
+}
+
+static u32
+i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+	       I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+	       I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm i2c_dp_aux_algo = {
+	.master_xfer	= i2c_algo_dp_aux_xfer,
+	.functionality	= i2c_algo_dp_aux_functionality,
+};
+
+static void
+i2c_dp_aux_reset_bus(struct i2c_adapter *adapter)
+{
+	(void) i2c_algo_dp_aux_address(adapter, 0, false);
+	(void) i2c_algo_dp_aux_stop(adapter, false);
+					   
+}
+
+static int
+i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
+{
+	adapter->algo = &i2c_dp_aux_algo;
+	adapter->retries = 3;
+	i2c_dp_aux_reset_bus(adapter);
+	return 0;
+}
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter)
+{
+	int error;
+	
+	error = i2c_dp_aux_prepare_bus(adapter);
+	if (error)
+		return error;
+	error = i2c_add_adapter(adapter);
+	return error;
+}
+EXPORT_SYMBOL(i2c_dp_aux_add_bus);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index cd4b9c5f715..26a6227c15f 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -54,6 +54,27 @@
 #define INTEL_OUTPUT_LVDS 4
 #define INTEL_OUTPUT_TVOUT 5
 #define INTEL_OUTPUT_HDMI 6
+#define INTEL_OUTPUT_DISPLAYPORT 7
+#define INTEL_OUTPUT_EDP 8
+
+/* Intel Pipe Clone Bit */
+#define INTEL_HDMIB_CLONE_BIT 1
+#define INTEL_HDMIC_CLONE_BIT 2
+#define INTEL_HDMID_CLONE_BIT 3
+#define INTEL_HDMIE_CLONE_BIT 4
+#define INTEL_HDMIF_CLONE_BIT 5
+#define INTEL_SDVO_NON_TV_CLONE_BIT 6
+#define INTEL_SDVO_TV_CLONE_BIT 7
+#define INTEL_SDVO_LVDS_CLONE_BIT 8
+#define INTEL_ANALOG_CLONE_BIT 9
+#define INTEL_TV_CLONE_BIT 10
+#define INTEL_DP_B_CLONE_BIT 11
+#define INTEL_DP_C_CLONE_BIT 12
+#define INTEL_DP_D_CLONE_BIT 13
+#define INTEL_LVDS_CLONE_BIT 14
+#define INTEL_DVO_TMDS_CLONE_BIT 15
+#define INTEL_DVO_LVDS_CLONE_BIT 16
+#define INTEL_EDP_CLONE_BIT 17
 
 #define INTEL_DVO_CHIP_NONE 0
 #define INTEL_DVO_CHIP_LVDS 1
@@ -65,7 +86,6 @@ struct intel_i2c_chan {
 	u32 reg; /* GPIO reg */
 	struct i2c_adapter adapter;
 	struct i2c_algo_bit_data algo;
-        u8 slave_addr;
 };
 
 struct intel_framebuffer {
@@ -79,11 +99,14 @@ struct intel_output {
 
 	struct drm_encoder enc;
 	int type;
-	struct intel_i2c_chan *i2c_bus; /* for control functions */
-	struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */
+	struct i2c_adapter *i2c_bus;
+	struct i2c_adapter *ddc_bus;
 	bool load_detect_temp;
 	bool needs_tv_clock;
 	void *dev_priv;
+	void (*hot_plug)(struct intel_output *);
+	int crtc_mask;
+	int clone_mask;
 };
 
 struct intel_crtc {
@@ -104,9 +127,9 @@ struct intel_crtc {
 #define enc_to_intel_output(x) container_of(x, struct intel_output, enc)
 #define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
 
-struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
-					const char *name);
-void intel_i2c_destroy(struct intel_i2c_chan *chan);
+struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
+				     const char *name);
+void intel_i2c_destroy(struct i2c_adapter *adapter);
 int intel_ddc_get_modes(struct intel_output *intel_output);
 extern bool intel_ddc_probe(struct intel_output *intel_output);
 void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
@@ -116,6 +139,12 @@ extern bool intel_sdvo_init(struct drm_device *dev, int output_device);
 extern void intel_dvo_init(struct drm_device *dev);
 extern void intel_tv_init(struct drm_device *dev);
 extern void intel_lvds_init(struct drm_device *dev);
+extern void intel_dp_init(struct drm_device *dev, int dp_reg);
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+		 struct drm_display_mode *adjusted_mode);
+extern void intel_edp_link_config (struct intel_output *, int *, int *);
+
 
 extern void intel_crtc_load_lut(struct drm_crtc *crtc);
 extern void intel_encoder_prepare (struct drm_encoder *encoder);
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 1ee3007d6ec..a4d2606de77 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -384,10 +384,9 @@ void intel_dvo_init(struct drm_device *dev)
 {
 	struct intel_output *intel_output;
 	struct intel_dvo_device *dvo;
-	struct intel_i2c_chan *i2cbus = NULL;
+	struct i2c_adapter *i2cbus = NULL;
 	int ret = 0;
 	int i;
-	int gpio_inited = 0;
 	int encoder_type = DRM_MODE_ENCODER_NONE;
 	intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL);
 	if (!intel_output)
@@ -420,14 +419,11 @@ void intel_dvo_init(struct drm_device *dev)
 		 * It appears that everything is on GPIOE except for panels
 		 * on i830 laptops, which are on GPIOB (DVOA).
 		 */
-		if (gpio_inited != gpio) {
-			if (i2cbus != NULL)
-				intel_i2c_destroy(i2cbus);
-			if (!(i2cbus = intel_i2c_create(dev, gpio,
-				gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
-				continue;
-			}
-			gpio_inited = gpio;
+		if (i2cbus != NULL)
+			intel_i2c_destroy(i2cbus);
+		if (!(i2cbus = intel_i2c_create(dev, gpio,
+			gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
+			continue;
 		}
 
 		if (dvo->dev_ops!= NULL)
@@ -439,14 +435,20 @@ void intel_dvo_init(struct drm_device *dev)
 			continue;
 
 		intel_output->type = INTEL_OUTPUT_DVO;
+		intel_output->crtc_mask = (1 << 0) | (1 << 1);
 		switch (dvo->type) {
 		case INTEL_DVO_CHIP_TMDS:
+			intel_output->clone_mask =
+				(1 << INTEL_DVO_TMDS_CLONE_BIT) |
+				(1 << INTEL_ANALOG_CLONE_BIT);
 			drm_connector_init(dev, connector,
 					   &intel_dvo_connector_funcs,
 					   DRM_MODE_CONNECTOR_DVII);
 			encoder_type = DRM_MODE_ENCODER_TMDS;
 			break;
 		case INTEL_DVO_CHIP_LVDS:
+			intel_output->clone_mask =
+				(1 << INTEL_DVO_LVDS_CLONE_BIT);
 			drm_connector_init(dev, connector,
 					   &intel_dvo_connector_funcs,
 					   DRM_MODE_CONNECTOR_LVDS);
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 1af7d68e380..1d30802e773 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -453,7 +453,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 	size = ALIGN(size, PAGE_SIZE);
 	fbo = drm_gem_object_alloc(dev, size);
 	if (!fbo) {
-		printk(KERN_ERR "failed to allocate framebuffer\n");
+		DRM_ERROR("failed to allocate framebuffer\n");
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -610,8 +610,8 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 	par->dev = dev;
 
 	/* To allow resizeing without swapping buffers */
-	printk("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width,
-	       intel_fb->base.height, obj_priv->gtt_offset, fbo);
+	DRM_DEBUG("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width,
+		  intel_fb->base.height, obj_priv->gtt_offset, fbo);
 
 	mutex_unlock(&dev->struct_mutex);
 	return 0;
@@ -698,13 +698,13 @@ static int intelfb_multi_fb_probe_crtc(struct drm_device *dev, struct drm_crtc *
 	} else
 		intelfb_set_par(info);
 
-	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+	DRM_INFO("fb%d: %s frame buffer device\n", info->node,
 	       info->fix.id);
 
 	/* Switch back to kernel console on panic */
 	kernelfb_mode = *modeset;
 	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
-	printk(KERN_INFO "registered panic notifier\n");
+	DRM_DEBUG("registered panic notifier\n");
 
 	return 0;
 }
@@ -852,13 +852,13 @@ static int intelfb_single_fb_probe(struct drm_device *dev)
 	} else
 		intelfb_set_par(info);
 
-	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+	DRM_INFO("fb%d: %s frame buffer device\n", info->node,
 	       info->fix.id);
 
 	/* Switch back to kernel console on panic */
 	kernelfb_mode = *modeset;
 	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
-	printk(KERN_INFO "registered panic notifier\n");
+	DRM_DEBUG("registered panic notifier\n");
 
 	return 0;
 }
@@ -872,8 +872,8 @@ void intelfb_restore(void)
 {
 	int ret;
 	if ((ret = drm_crtc_helper_set_config(&kernelfb_mode)) != 0) {
-		printk(KERN_ERR "Failed to restore crtc configuration: %d\n",
-		       ret);
+		DRM_ERROR("Failed to restore crtc configuration: %d\n",
+			  ret);
 	}
 }
 
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 4ea2a651b92..fa304e13601 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -31,6 +31,7 @@
 #include "drmP.h"
 #include "drm.h"
 #include "drm_crtc.h"
+#include "drm_edid.h"
 #include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
@@ -56,8 +57,7 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder,
 	sdvox = SDVO_ENCODING_HDMI |
 		SDVO_BORDER_ENABLE |
 		SDVO_VSYNC_ACTIVE_HIGH |
-		SDVO_HSYNC_ACTIVE_HIGH |
-		SDVO_NULL_PACKETS_DURING_VSYNC;
+		SDVO_HSYNC_ACTIVE_HIGH;
 
 	if (hdmi_priv->has_hdmi_sink)
 		sdvox |= SDVO_AUDIO_ENABLE;
@@ -129,83 +129,28 @@ static bool intel_hdmi_mode_fixup(struct drm_encoder *encoder,
 	return true;
 }
 
-static void
-intel_hdmi_sink_detect(struct drm_connector *connector)
-{
-	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
-	struct edid *edid = NULL;
-
-	edid = drm_get_edid(&intel_output->base,
-			    &intel_output->ddc_bus->adapter);
-	if (edid != NULL) {
-		hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
-		kfree(edid);
-		intel_output->base.display_info.raw_edid = NULL;
-	}
-}
-
-static enum drm_connector_status
-igdng_hdmi_detect(struct drm_connector *connector)
-{
-	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
-
-	/* FIXME hotplug detect */
-
-	hdmi_priv->has_hdmi_sink = false;
-	intel_hdmi_sink_detect(connector);
-	if (hdmi_priv->has_hdmi_sink)
-		return connector_status_connected;
-	else
-		return connector_status_disconnected;
-}
-
 static enum drm_connector_status
 intel_hdmi_detect(struct drm_connector *connector)
 {
-	struct drm_device *dev = connector->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_output *intel_output = to_intel_output(connector);
 	struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
-	u32 temp, bit;
-
-	if (IS_IGDNG(dev))
-		return igdng_hdmi_detect(connector);
-
-	temp = I915_READ(PORT_HOTPLUG_EN);
-
-	switch (hdmi_priv->sdvox_reg) {
-	case SDVOB:
-		temp |= HDMIB_HOTPLUG_INT_EN;
-		break;
-	case SDVOC:
-		temp |= HDMIC_HOTPLUG_INT_EN;
-		break;
-	default:
-		return connector_status_unknown;
-	}
-
-	I915_WRITE(PORT_HOTPLUG_EN, temp);
+	struct edid *edid = NULL;
+	enum drm_connector_status status = connector_status_disconnected;
 
-	POSTING_READ(PORT_HOTPLUG_EN);
+	hdmi_priv->has_hdmi_sink = false;
+	edid = drm_get_edid(&intel_output->base,
+			    intel_output->ddc_bus);
 
-	switch (hdmi_priv->sdvox_reg) {
-	case SDVOB:
-		bit = HDMIB_HOTPLUG_INT_STATUS;
-		break;
-	case SDVOC:
-		bit = HDMIC_HOTPLUG_INT_STATUS;
-		break;
-	default:
-		return connector_status_unknown;
+	if (edid) {
+		if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+			status = connector_status_connected;
+			hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
+		}
+		intel_output->base.display_info.raw_edid = NULL;
+		kfree(edid);
 	}
 
-	if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) {
-		intel_hdmi_sink_detect(connector);
-		return connector_status_connected;
-	} else
-		return connector_status_disconnected;
+	return status;
 }
 
 static int intel_hdmi_get_modes(struct drm_connector *connector)
@@ -285,22 +230,28 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
 
 	connector->interlace_allowed = 0;
 	connector->doublescan_allowed = 0;
+	intel_output->crtc_mask = (1 << 0) | (1 << 1);
 
 	/* Set up the DDC bus. */
-	if (sdvox_reg == SDVOB)
+	if (sdvox_reg == SDVOB) {
+		intel_output->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB");
-	else if (sdvox_reg == SDVOC)
+	} else if (sdvox_reg == SDVOC) {
+		intel_output->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC");
-	else if (sdvox_reg == HDMIB)
+	} else if (sdvox_reg == HDMIB) {
+		intel_output->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE,
 								"HDMIB");
-	else if (sdvox_reg == HDMIC)
+	} else if (sdvox_reg == HDMIC) {
+		intel_output->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD,
 								"HDMIC");
-	else if (sdvox_reg == HDMID)
+	} else if (sdvox_reg == HDMID) {
+		intel_output->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF,
 								"HDMID");
-
+	}
 	if (!intel_output->ddc_bus)
 		goto err_connector;
 
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index f7061f68d05..62b8bead765 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -124,6 +124,7 @@ static void set_data(void *data, int state_high)
  * @output: driver specific output device
  * @reg: GPIO reg to use
  * @name: name for this bus
+ * @slave_addr: slave address (if fixed)
  *
  * Creates and registers a new i2c bus with the Linux i2c layer, for use
  * in output probing and control (e.g. DDC or SDVO control functions).
@@ -139,8 +140,8 @@ static void set_data(void *data, int state_high)
  *   %GPIOH
  * see PRM for details on how these different busses are used.
  */
-struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
-					const char *name)
+struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
+				     const char *name)
 {
 	struct intel_i2c_chan *chan;
 
@@ -174,7 +175,7 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
 	intel_i2c_quirk_set(dev, false);
 	udelay(20);
 
-	return chan;
+	return &chan->adapter;
 
 out_free:
 	kfree(chan);
@@ -187,11 +188,16 @@ out_free:
  *
  * Unregister the adapter from the i2c layer, then free the structure.
  */
-void intel_i2c_destroy(struct intel_i2c_chan *chan)
+void intel_i2c_destroy(struct i2c_adapter *adapter)
 {
-	if (!chan)
+	struct intel_i2c_chan *chan;
+
+	if (!adapter)
 		return;
 
+	chan = container_of(adapter,
+			    struct intel_i2c_chan,
+			    adapter);
 	i2c_del_adapter(&chan->adapter);
 	kfree(chan);
 }
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index f073ed8432e..8df02ef8926 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -36,9 +36,25 @@
 #include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
+#include <linux/acpi.h>
 
 #define I915_LVDS "i915_lvds"
 
+/*
+ * the following four scaling options are defined.
+ * #define DRM_MODE_SCALE_NON_GPU	0
+ * #define DRM_MODE_SCALE_FULLSCREEN	1
+ * #define DRM_MODE_SCALE_NO_SCALE	2
+ * #define DRM_MODE_SCALE_ASPECT	3
+ */
+
+/* Private structure for the integrated LVDS support */
+struct intel_lvds_priv {
+	int fitting_mode;
+	u32 pfit_control;
+	u32 pfit_pgm_ratios;
+};
+
 /**
  * Sets the backlight level.
  *
@@ -213,26 +229,45 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 				  struct drm_display_mode *mode,
 				  struct drm_display_mode *adjusted_mode)
 {
+	/*
+	 * float point operation is not supported . So the PANEL_RATIO_FACTOR
+	 * is defined, which can avoid the float point computation when
+	 * calculating the panel ratio.
+	 */
+#define PANEL_RATIO_FACTOR 8192
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
 	struct drm_encoder *tmp_encoder;
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+	u32 pfit_control = 0, pfit_pgm_ratios = 0;
+	int left_border = 0, right_border = 0, top_border = 0;
+	int bottom_border = 0;
+	bool border = 0;
+	int panel_ratio, desired_ratio, vert_scale, horiz_scale;
+	int horiz_ratio, vert_ratio;
+	u32 hsync_width, vsync_width;
+	u32 hblank_width, vblank_width;
+	u32 hsync_pos, vsync_pos;
 
 	/* Should never happen!! */
 	if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
-		printk(KERN_ERR "Can't support LVDS on pipe A\n");
+		DRM_ERROR("Can't support LVDS on pipe A\n");
 		return false;
 	}
 
 	/* Should never happen!! */
 	list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) {
 		if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) {
-			printk(KERN_ERR "Can't enable LVDS and another "
+			DRM_ERROR("Can't enable LVDS and another "
 			       "encoder on the same pipe\n");
 			return false;
 		}
 	}
-
+	/* If we don't have a panel mode, there is nothing we can do */
+	if (dev_priv->panel_fixed_mode == NULL)
+		return true;
 	/*
 	 * If we have timings from the BIOS for the panel, put them in
 	 * to the adjusted mode.  The CRTC will be set up for this mode,
@@ -256,6 +291,243 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 		drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
 	}
 
+	/* Make sure pre-965s set dither correctly */
+	if (!IS_I965G(dev)) {
+		if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
+			pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+	}
+
+	/* Native modes don't need fitting */
+	if (adjusted_mode->hdisplay == mode->hdisplay &&
+			adjusted_mode->vdisplay == mode->vdisplay) {
+		pfit_pgm_ratios = 0;
+		border = 0;
+		goto out;
+	}
+
+	/* 965+ wants fuzzy fitting */
+	if (IS_I965G(dev))
+		pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) |
+					PFIT_FILTER_FUZZY;
+
+	hsync_width = adjusted_mode->crtc_hsync_end -
+					adjusted_mode->crtc_hsync_start;
+	vsync_width = adjusted_mode->crtc_vsync_end -
+					adjusted_mode->crtc_vsync_start;
+	hblank_width = adjusted_mode->crtc_hblank_end -
+					adjusted_mode->crtc_hblank_start;
+	vblank_width = adjusted_mode->crtc_vblank_end -
+					adjusted_mode->crtc_vblank_start;
+	/*
+	 * Deal with panel fitting options. Figure out how to stretch the
+	 * image based on its aspect ratio & the current panel fitting mode.
+	 */
+	panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR /
+				adjusted_mode->vdisplay;
+	desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR /
+				mode->vdisplay;
+	/*
+	 * Enable automatic panel scaling for non-native modes so that they fill
+	 * the screen.  Should be enabled before the pipe is enabled, according
+	 * to register description and PRM.
+	 * Change the value here to see the borders for debugging
+	 */
+	I915_WRITE(BCLRPAT_A, 0);
+	I915_WRITE(BCLRPAT_B, 0);
+
+	switch (lvds_priv->fitting_mode) {
+	case DRM_MODE_SCALE_NO_SCALE:
+		/*
+		 * For centered modes, we have to calculate border widths &
+		 * heights and modify the values programmed into the CRTC.
+		 */
+		left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2;
+		right_border = left_border;
+		if (mode->hdisplay & 1)
+			right_border++;
+		top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2;
+		bottom_border = top_border;
+		if (mode->vdisplay & 1)
+			bottom_border++;
+		/* Set active & border values */
+		adjusted_mode->crtc_hdisplay = mode->hdisplay;
+		/* Keep the boder be even */
+		if (right_border & 1)
+			right_border++;
+		/* use the border directly instead of border minuse one */
+		adjusted_mode->crtc_hblank_start = mode->hdisplay +
+						right_border;
+		/* keep the blank width constant */
+		adjusted_mode->crtc_hblank_end =
+			adjusted_mode->crtc_hblank_start + hblank_width;
+		/* get the hsync pos relative to hblank start */
+		hsync_pos = (hblank_width - hsync_width) / 2;
+		/* keep the hsync pos be even */
+		if (hsync_pos & 1)
+			hsync_pos++;
+		adjusted_mode->crtc_hsync_start =
+				adjusted_mode->crtc_hblank_start + hsync_pos;
+		/* keep the hsync width constant */
+		adjusted_mode->crtc_hsync_end =
+				adjusted_mode->crtc_hsync_start + hsync_width;
+		adjusted_mode->crtc_vdisplay = mode->vdisplay;
+		/* use the border instead of border minus one */
+		adjusted_mode->crtc_vblank_start = mode->vdisplay +
+						bottom_border;
+		/* keep the vblank width constant */
+		adjusted_mode->crtc_vblank_end =
+				adjusted_mode->crtc_vblank_start + vblank_width;
+		/* get the vsync start postion relative to vblank start */
+		vsync_pos = (vblank_width - vsync_width) / 2;
+		adjusted_mode->crtc_vsync_start =
+				adjusted_mode->crtc_vblank_start + vsync_pos;
+		/* keep the vsync width constant */
+		adjusted_mode->crtc_vsync_end =
+				adjusted_mode->crtc_vblank_start + vsync_width;
+		border = 1;
+		break;
+	case DRM_MODE_SCALE_ASPECT:
+		/* Scale but preserve the spect ratio */
+		pfit_control |= PFIT_ENABLE;
+		if (IS_I965G(dev)) {
+			/* 965+ is easy, it does everything in hw */
+			if (panel_ratio > desired_ratio)
+				pfit_control |= PFIT_SCALING_PILLAR;
+			else if (panel_ratio < desired_ratio)
+				pfit_control |= PFIT_SCALING_LETTER;
+			else
+				pfit_control |= PFIT_SCALING_AUTO;
+		} else {
+			/*
+			 * For earlier chips we have to calculate the scaling
+			 * ratio by hand and program it into the
+			 * PFIT_PGM_RATIO register
+			 */
+			u32 horiz_bits, vert_bits, bits = 12;
+			horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/
+						adjusted_mode->hdisplay;
+			vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/
+						adjusted_mode->vdisplay;
+			horiz_scale = adjusted_mode->hdisplay *
+					PANEL_RATIO_FACTOR / mode->hdisplay;
+			vert_scale = adjusted_mode->vdisplay *
+					PANEL_RATIO_FACTOR / mode->vdisplay;
+
+			/* retain aspect ratio */
+			if (panel_ratio > desired_ratio) { /* Pillar */
+				u32 scaled_width;
+				scaled_width = mode->hdisplay * vert_scale /
+						PANEL_RATIO_FACTOR;
+				horiz_ratio = vert_ratio;
+				pfit_control |= (VERT_AUTO_SCALE |
+						 VERT_INTERP_BILINEAR |
+						 HORIZ_INTERP_BILINEAR);
+				/* Pillar will have left/right borders */
+				left_border = (adjusted_mode->hdisplay -
+						scaled_width) / 2;
+				right_border = left_border;
+				if (mode->hdisplay & 1) /* odd resolutions */
+					right_border++;
+				/* keep the border be even */
+				if (right_border & 1)
+					right_border++;
+				adjusted_mode->crtc_hdisplay = scaled_width;
+				/* use border instead of border minus one */
+				adjusted_mode->crtc_hblank_start =
+					scaled_width + right_border;
+				/* keep the hblank width constant */
+				adjusted_mode->crtc_hblank_end =
+					adjusted_mode->crtc_hblank_start +
+							hblank_width;
+				/*
+				 * get the hsync start pos relative to
+				 * hblank start
+				 */
+				hsync_pos = (hblank_width - hsync_width) / 2;
+				/* keep the hsync_pos be even */
+				if (hsync_pos & 1)
+					hsync_pos++;
+				adjusted_mode->crtc_hsync_start =
+					adjusted_mode->crtc_hblank_start +
+							hsync_pos;
+				/* keept hsync width constant */
+				adjusted_mode->crtc_hsync_end =
+					adjusted_mode->crtc_hsync_start +
+							hsync_width;
+				border = 1;
+			} else if (panel_ratio < desired_ratio) { /* letter */
+				u32 scaled_height = mode->vdisplay *
+					horiz_scale / PANEL_RATIO_FACTOR;
+				vert_ratio = horiz_ratio;
+				pfit_control |= (HORIZ_AUTO_SCALE |
+						 VERT_INTERP_BILINEAR |
+						 HORIZ_INTERP_BILINEAR);
+				/* Letterbox will have top/bottom border */
+				top_border = (adjusted_mode->vdisplay -
+					scaled_height) / 2;
+				bottom_border = top_border;
+				if (mode->vdisplay & 1)
+					bottom_border++;
+				adjusted_mode->crtc_vdisplay = scaled_height;
+				/* use border instead of border minus one */
+				adjusted_mode->crtc_vblank_start =
+					scaled_height + bottom_border;
+				/* keep the vblank width constant */
+				adjusted_mode->crtc_vblank_end =
+					adjusted_mode->crtc_vblank_start +
+							vblank_width;
+				/*
+				 * get the vsync start pos relative to
+				 * vblank start
+				 */
+				vsync_pos = (vblank_width - vsync_width) / 2;
+				adjusted_mode->crtc_vsync_start =
+					adjusted_mode->crtc_vblank_start +
+							vsync_pos;
+				/* keep the vsync width constant */
+				adjusted_mode->crtc_vsync_end =
+					adjusted_mode->crtc_vsync_start +
+							vsync_width;
+				border = 1;
+			} else {
+			/* Aspects match, Let hw scale both directions */
+				pfit_control |= (VERT_AUTO_SCALE |
+						 HORIZ_AUTO_SCALE |
+						 VERT_INTERP_BILINEAR |
+						 HORIZ_INTERP_BILINEAR);
+			}
+			horiz_bits = (1 << bits) * horiz_ratio /
+					PANEL_RATIO_FACTOR;
+			vert_bits = (1 << bits) * vert_ratio /
+					PANEL_RATIO_FACTOR;
+			pfit_pgm_ratios =
+				((vert_bits << PFIT_VERT_SCALE_SHIFT) &
+						PFIT_VERT_SCALE_MASK) |
+				((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) &
+						PFIT_HORIZ_SCALE_MASK);
+		}
+		break;
+
+	case DRM_MODE_SCALE_FULLSCREEN:
+		/*
+		 * Full scaling, even if it changes the aspect ratio.
+		 * Fortunately this is all done for us in hw.
+		 */
+		pfit_control |= PFIT_ENABLE;
+		if (IS_I965G(dev))
+			pfit_control |= PFIT_SCALING_AUTO;
+		else
+			pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
+					 VERT_INTERP_BILINEAR |
+					 HORIZ_INTERP_BILINEAR);
+		break;
+	default:
+		break;
+	}
+
+out:
+	lvds_priv->pfit_control = pfit_control;
+	lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
 	/*
 	 * XXX: It would be nice to support lower refresh rates on the
 	 * panels to reduce power consumption, and perhaps match the
@@ -301,8 +573,8 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder,
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
-	u32 pfit_control;
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
 
 	/*
 	 * The LVDS pin pair will already have been turned on in the
@@ -319,22 +591,8 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder,
 	 * screen.  Should be enabled before the pipe is enabled, according to
 	 * register description and PRM.
 	 */
-	if (mode->hdisplay != adjusted_mode->hdisplay ||
-	    mode->vdisplay != adjusted_mode->vdisplay)
-		pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
-				HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
-				HORIZ_INTERP_BILINEAR);
-	else
-		pfit_control = 0;
-
-	if (!IS_I965G(dev)) {
-		if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
-			pfit_control |= PANEL_8TO6_DITHER_ENABLE;
-	}
-	else
-		pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT;
-
-	I915_WRITE(PFIT_CONTROL, pfit_control);
+	I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios);
+	I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control);
 }
 
 /**
@@ -406,6 +664,34 @@ static int intel_lvds_set_property(struct drm_connector *connector,
 				   struct drm_property *property,
 				   uint64_t value)
 {
+	struct drm_device *dev = connector->dev;
+	struct intel_output *intel_output =
+			to_intel_output(connector);
+
+	if (property == dev->mode_config.scaling_mode_property &&
+				connector->encoder) {
+		struct drm_crtc *crtc = connector->encoder->crtc;
+		struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+		if (value == DRM_MODE_SCALE_NON_GPU) {
+			DRM_DEBUG_KMS(I915_LVDS,
+					"non_GPU property is unsupported\n");
+			return 0;
+		}
+		if (lvds_priv->fitting_mode == value) {
+			/* the LVDS scaling property is not changed */
+			return 0;
+		}
+		lvds_priv->fitting_mode = value;
+		if (crtc && crtc->enabled) {
+			/*
+			 * If the CRTC is enabled, the display will be changed
+			 * according to the new panel fitting mode.
+			 */
+			drm_crtc_helper_set_mode(crtc, &crtc->mode,
+				crtc->x, crtc->y, crtc->fb);
+		}
+	}
+
 	return 0;
 }
 
@@ -456,7 +742,7 @@ static const struct dmi_system_id intel_no_lvds[] = {
 		.callback = intel_no_lvds_dmi_callback,
 		.ident = "Apple Mac Mini (Core series)",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
 		},
 	},
@@ -464,7 +750,7 @@ static const struct dmi_system_id intel_no_lvds[] = {
 		.callback = intel_no_lvds_dmi_callback,
 		.ident = "Apple Mac Mini (Core 2 series)",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
 		},
 	},
@@ -494,6 +780,14 @@ static const struct dmi_system_id intel_no_lvds[] = {
 	},
 	{
 		.callback = intel_no_lvds_dmi_callback,
+		.ident = "AOpen Mini PC MP915",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+			DMI_MATCH(DMI_BOARD_NAME, "i915GMx-F"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
 		.ident = "Aopen i945GTt-VFA",
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
@@ -503,6 +797,65 @@ static const struct dmi_system_id intel_no_lvds[] = {
 	{ }	/* terminating entry */
 };
 
+#ifdef CONFIG_ACPI
+/*
+ * check_lid_device -- check whether @handle is an ACPI LID device.
+ * @handle: ACPI device handle
+ * @level : depth in the ACPI namespace tree
+ * @context: the number of LID device when we find the device
+ * @rv: a return value to fill if desired (Not use)
+ */
+static acpi_status
+check_lid_device(acpi_handle handle, u32 level, void *context,
+			void **return_value)
+{
+	struct acpi_device *acpi_dev;
+	int *lid_present = context;
+
+	acpi_dev = NULL;
+	/* Get the acpi device for device handle */
+	if (acpi_bus_get_device(handle, &acpi_dev) || !acpi_dev) {
+		/* If there is no ACPI device for handle, return */
+		return AE_OK;
+	}
+
+	if (!strncmp(acpi_device_hid(acpi_dev), "PNP0C0D", 7))
+		*lid_present = 1;
+
+	return AE_OK;
+}
+
+/**
+ * check whether there exists the ACPI LID device by enumerating the ACPI
+ * device tree.
+ */
+static int intel_lid_present(void)
+{
+	int lid_present = 0;
+
+	if (acpi_disabled) {
+		/* If ACPI is disabled, there is no ACPI device tree to
+		 * check, so assume the LID device would have been present.
+		 */
+		return 1;
+	}
+
+	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+				ACPI_UINT32_MAX,
+				check_lid_device, &lid_present, NULL);
+
+	return lid_present;
+}
+#else
+static int intel_lid_present(void)
+{
+	/* In the absence of ACPI built in, assume that the LID device would
+	 * have been present.
+	 */
+	return 1;
+}
+#endif
+
 /**
  * intel_lvds_init - setup LVDS connectors on this device
  * @dev: drm device
@@ -518,6 +871,7 @@ void intel_lvds_init(struct drm_device *dev)
 	struct drm_encoder *encoder;
 	struct drm_display_mode *scan; /* *modes, *bios_mode; */
 	struct drm_crtc *crtc;
+	struct intel_lvds_priv *lvds_priv;
 	u32 lvds;
 	int pipe, gpio = GPIOC;
 
@@ -525,13 +879,28 @@ void intel_lvds_init(struct drm_device *dev)
 	if (dmi_check_system(intel_no_lvds))
 		return;
 
+	/* Assume that any device without an ACPI LID device also doesn't
+	 * have an integrated LVDS.  We would be better off parsing the BIOS
+	 * to get a reliable indicator, but that code isn't written yet.
+	 *
+	 * In the case of all-in-one desktops using LVDS that we've seen,
+	 * they're using SDVO LVDS.
+	 */
+	if (!intel_lid_present())
+		return;
+
 	if (IS_IGDNG(dev)) {
 		if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
 			return;
+		if (dev_priv->edp_support) {
+			DRM_DEBUG("disable LVDS for eDP support\n");
+			return;
+		}
 		gpio = PCH_GPIOC;
 	}
 
-	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+	intel_output = kzalloc(sizeof(struct intel_output) +
+				sizeof(struct intel_lvds_priv), GFP_KERNEL);
 	if (!intel_output) {
 		return;
 	}
@@ -547,13 +916,26 @@ void intel_lvds_init(struct drm_device *dev)
 	drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
 	intel_output->type = INTEL_OUTPUT_LVDS;
 
+	intel_output->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
+	intel_output->crtc_mask = (1 << 1);
 	drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
 	drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
 	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 	connector->interlace_allowed = false;
 	connector->doublescan_allowed = false;
 
+	lvds_priv = (struct intel_lvds_priv *)(intel_output + 1);
+	intel_output->dev_priv = lvds_priv;
+	/* create the scaling mode property */
+	drm_mode_create_scaling_mode_property(dev);
+	/*
+	 * the initial panel fitting mode will be FULL_SCREEN.
+	 */
 
+	drm_connector_attach_property(&intel_output->base,
+				      dev->mode_config.scaling_mode_property,
+				      DRM_MODE_SCALE_FULLSCREEN);
+	lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN;
 	/*
 	 * LVDS discovery:
 	 * 1) check for EDID on DDC
@@ -649,5 +1031,5 @@ failed:
 	if (intel_output->ddc_bus)
 		intel_i2c_destroy(intel_output->ddc_bus);
 	drm_connector_cleanup(connector);
-	kfree(connector);
+	kfree(intel_output);
 }
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index e0910fefce8..67e2f4632a2 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -53,10 +53,9 @@ bool intel_ddc_probe(struct intel_output *intel_output)
 		}
 	};
 
-	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
-	ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2);
-	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
-
+	intel_i2c_quirk_set(intel_output->base.dev, true);
+	ret = i2c_transfer(intel_output->ddc_bus, msgs, 2);
+	intel_i2c_quirk_set(intel_output->base.dev, false);
 	if (ret == 2)
 		return true;
 
@@ -74,10 +73,9 @@ int intel_ddc_get_modes(struct intel_output *intel_output)
 	struct edid *edid;
 	int ret = 0;
 
-	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
-	edid = drm_get_edid(&intel_output->base,
-			    &intel_output->ddc_bus->adapter);
-	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
+	intel_i2c_quirk_set(intel_output->base.dev, true);
+	edid = drm_get_edid(&intel_output->base, intel_output->ddc_bus);
+	intel_i2c_quirk_set(intel_output->base.dev, false);
 	if (edid) {
 		drm_mode_connector_update_edid_property(&intel_output->base,
 							edid);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 9a00adb3a50..d3b74ba62b4 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -31,6 +31,7 @@
 #include "drm.h"
 #include "drm_crtc.h"
 #include "intel_drv.h"
+#include "drm_edid.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
 #include "intel_sdvo_regs.h"
@@ -38,8 +39,7 @@
 #undef SDVO_DEBUG
 #define I915_SDVO	"i915_sdvo"
 struct intel_sdvo_priv {
-	struct intel_i2c_chan *i2c_bus;
-	int slaveaddr;
+	u8 slave_addr;
 
 	/* Register for the SDVO device: SDVOB or SDVOC */
 	int output_device;
@@ -56,6 +56,12 @@ struct intel_sdvo_priv {
 	/* Pixel clock limitations reported by the SDVO device, in kHz */
 	int pixel_clock_min, pixel_clock_max;
 
+	/*
+	* For multiple function SDVO device,
+	* this is for current attached outputs.
+	*/
+	uint16_t attached_output;
+
 	/**
 	 * This is set if we're going to treat the device as TV-out.
 	 *
@@ -69,12 +75,23 @@ struct intel_sdvo_priv {
 	 * This is set if we treat the device as HDMI, instead of DVI.
 	 */
 	bool is_hdmi;
+
 	/**
 	 * This is set if we detect output of sdvo device as LVDS.
 	 */
 	bool is_lvds;
 
 	/**
+	 * This is sdvo flags for input timing.
+	 */
+	uint8_t sdvo_flags;
+
+	/**
+	 * This is sdvo fixed pannel mode pointer
+	 */
+	struct drm_display_mode *sdvo_lvds_fixed_mode;
+
+	/**
 	 * Returned SDTV resolutions allowed for the current format, if the
 	 * device reported it.
 	 */
@@ -104,6 +121,9 @@ struct intel_sdvo_priv {
 	u32 save_SDVOX;
 };
 
+static bool
+intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags);
+
 /**
  * Writes the SDVOB or SDVOC with the given value, but always writes both
  * SDVOB and SDVOC to work around apparent hardware issues (according to
@@ -146,13 +166,13 @@ static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr,
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = sdvo_priv->i2c_bus->slave_addr,
+			.addr = sdvo_priv->slave_addr >> 1,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = sdvo_priv->i2c_bus->slave_addr,
+			.addr = sdvo_priv->slave_addr >> 1,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = buf,
@@ -162,7 +182,7 @@ static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr,
 	out_buf[0] = addr;
 	out_buf[1] = 0;
 
-	if ((ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2)) == 2)
+	if ((ret = i2c_transfer(intel_output->i2c_bus, msgs, 2)) == 2)
 	{
 		*ch = buf[0];
 		return true;
@@ -175,10 +195,11 @@ static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr,
 static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr,
 				  u8 ch)
 {
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 	u8 out_buf[2];
 	struct i2c_msg msgs[] = {
 		{
-			.addr = intel_output->i2c_bus->slave_addr,
+			.addr = sdvo_priv->slave_addr >> 1,
 			.flags = 0,
 			.len = 2,
 			.buf = out_buf,
@@ -188,7 +209,7 @@ static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr,
 	out_buf[0] = addr;
 	out_buf[1] = ch;
 
-	if (i2c_transfer(&intel_output->i2c_bus->adapter, msgs, 1) == 1)
+	if (i2c_transfer(intel_output->i2c_bus, msgs, 1) == 1)
 	{
 		return true;
 	}
@@ -592,6 +613,7 @@ intel_sdvo_create_preferred_input_timing(struct intel_output *output,
 					 uint16_t height)
 {
 	struct intel_sdvo_preferred_input_timing_args args;
+	struct intel_sdvo_priv *sdvo_priv = output->dev_priv;
 	uint8_t status;
 
 	memset(&args, 0, sizeof(args));
@@ -599,7 +621,12 @@ intel_sdvo_create_preferred_input_timing(struct intel_output *output,
 	args.width = width;
 	args.height = height;
 	args.interlace = 0;
-	args.scaled = 0;
+
+	if (sdvo_priv->is_lvds &&
+	   (sdvo_priv->sdvo_lvds_fixed_mode->hdisplay != width ||
+	    sdvo_priv->sdvo_lvds_fixed_mode->vdisplay != height))
+		args.scaled = 1;
+
 	intel_sdvo_write_cmd(output, SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING,
 			     &args, sizeof(args));
 	status = intel_sdvo_read_response(output, NULL, 0);
@@ -944,12 +971,7 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
 	struct intel_output *output = enc_to_intel_output(encoder);
 	struct intel_sdvo_priv *dev_priv = output->dev_priv;
 
-	if (!dev_priv->is_tv) {
-		/* Make the CRTC code factor in the SDVO pixel multiplier.  The
-		 * SDVO device will be told of the multiplier during mode_set.
-		 */
-		adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode);
-	} else {
+	if (dev_priv->is_tv) {
 		struct intel_sdvo_dtd output_dtd;
 		bool success;
 
@@ -980,6 +1002,47 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
 			intel_sdvo_get_preferred_input_timing(output,
 							     &input_dtd);
 			intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd);
+			dev_priv->sdvo_flags = input_dtd.part2.sdvo_flags;
+
+			drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+			mode->clock = adjusted_mode->clock;
+
+			adjusted_mode->clock *=
+				intel_sdvo_get_pixel_multiplier(mode);
+		} else {
+			return false;
+		}
+	} else if (dev_priv->is_lvds) {
+		struct intel_sdvo_dtd output_dtd;
+		bool success;
+
+		drm_mode_set_crtcinfo(dev_priv->sdvo_lvds_fixed_mode, 0);
+		/* Set output timings */
+		intel_sdvo_get_dtd_from_mode(&output_dtd,
+				dev_priv->sdvo_lvds_fixed_mode);
+
+		intel_sdvo_set_target_output(output,
+					     dev_priv->controlled_output);
+		intel_sdvo_set_output_timing(output, &output_dtd);
+
+		/* Set the input timing to the screen. Assume always input 0. */
+		intel_sdvo_set_target_input(output, true, false);
+
+
+		success = intel_sdvo_create_preferred_input_timing(
+				output,
+				mode->clock / 10,
+				mode->hdisplay,
+				mode->vdisplay);
+
+		if (success) {
+			struct intel_sdvo_dtd input_dtd;
+
+			intel_sdvo_get_preferred_input_timing(output,
+							     &input_dtd);
+			intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd);
+			dev_priv->sdvo_flags = input_dtd.part2.sdvo_flags;
 
 			drm_mode_set_crtcinfo(adjusted_mode, 0);
 
@@ -990,6 +1053,12 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
 		} else {
 			return false;
 		}
+
+	} else {
+		/* Make the CRTC code factor in the SDVO pixel multiplier.  The
+		 * SDVO device will be told of the multiplier during mode_set.
+		 */
+		adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode);
 	}
 	return true;
 }
@@ -1033,15 +1102,16 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
 
 	/* We have tried to get input timing in mode_fixup, and filled into
 	   adjusted_mode */
-	if (sdvo_priv->is_tv)
+	if (sdvo_priv->is_tv || sdvo_priv->is_lvds) {
 		intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
-	else
+		input_dtd.part2.sdvo_flags = sdvo_priv->sdvo_flags;
+	} else
 		intel_sdvo_get_dtd_from_mode(&input_dtd, mode);
 
 	/* If it's a TV, we already set the output timing in mode_fixup.
 	 * Otherwise, the output timing is equal to the input timing.
 	 */
-	if (!sdvo_priv->is_tv) {
+	if (!sdvo_priv->is_tv && !sdvo_priv->is_lvds) {
 		/* Set the output timing to the screen */
 		intel_sdvo_set_target_output(output,
 					     sdvo_priv->controlled_output);
@@ -1116,6 +1186,8 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
 		sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT;
 	}
 
+	if (sdvo_priv->sdvo_flags & SDVO_NEED_TO_STALL)
+		sdvox |= SDVO_STALL_SELECT;
 	intel_sdvo_write_sdvox(output, sdvox);
 }
 
@@ -1276,6 +1348,17 @@ static int intel_sdvo_mode_valid(struct drm_connector *connector,
 	if (sdvo_priv->pixel_clock_max < mode->clock)
 		return MODE_CLOCK_HIGH;
 
+	if (sdvo_priv->is_lvds == true) {
+		if (sdvo_priv->sdvo_lvds_fixed_mode == NULL)
+			return MODE_PANEL;
+
+		if (mode->hdisplay > sdvo_priv->sdvo_lvds_fixed_mode->hdisplay)
+			return MODE_PANEL;
+
+		if (mode->vdisplay > sdvo_priv->sdvo_lvds_fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+
 	return MODE_OK;
 }
 
@@ -1362,42 +1445,96 @@ void intel_sdvo_set_hotplug(struct drm_connector *connector, int on)
 	intel_sdvo_read_response(intel_output, &response, 2);
 }
 
-static void
-intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
+static bool
+intel_sdvo_multifunc_encoder(struct intel_output *intel_output)
+{
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	int caps = 0;
+
+	if (sdvo_priv->caps.output_flags &
+		(SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1))
+		caps++;
+	if (sdvo_priv->caps.output_flags &
+		(SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1))
+		caps++;
+	if (sdvo_priv->caps.output_flags &
+		(SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID1))
+		caps++;
+	if (sdvo_priv->caps.output_flags &
+		(SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_CVBS1))
+		caps++;
+	if (sdvo_priv->caps.output_flags &
+		(SDVO_OUTPUT_YPRPB0 | SDVO_OUTPUT_YPRPB1))
+		caps++;
+
+	if (sdvo_priv->caps.output_flags &
+		(SDVO_OUTPUT_SCART0 | SDVO_OUTPUT_SCART1))
+		caps++;
+
+	if (sdvo_priv->caps.output_flags &
+		(SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1))
+		caps++;
+
+	return (caps > 1);
+}
+
+enum drm_connector_status
+intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response)
 {
 	struct intel_output *intel_output = to_intel_output(connector);
 	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	enum drm_connector_status status = connector_status_connected;
 	struct edid *edid = NULL;
 
-	intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
 	edid = drm_get_edid(&intel_output->base,
-			    &intel_output->ddc_bus->adapter);
+			    intel_output->ddc_bus);
 	if (edid != NULL) {
-		sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid);
+		/* Don't report the output as connected if it's a DVI-I
+		 * connector with a non-digital EDID coming out.
+		 */
+		if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
+			if (edid->input & DRM_EDID_INPUT_DIGITAL)
+				sdvo_priv->is_hdmi =
+					drm_detect_hdmi_monitor(edid);
+			else
+				status = connector_status_disconnected;
+		}
+
 		kfree(edid);
 		intel_output->base.display_info.raw_edid = NULL;
-	}
+
+	} else if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1))
+		status = connector_status_disconnected;
+
+	return status;
 }
 
 static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector)
 {
-	u8 response[2];
+	uint16_t response;
 	u8 status;
 	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 
 	intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0);
 	status = intel_sdvo_read_response(intel_output, &response, 2);
 
-	DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]);
+	DRM_DEBUG("SDVO response %d %d\n", response & 0xff, response >> 8);
 
 	if (status != SDVO_CMD_STATUS_SUCCESS)
 		return connector_status_unknown;
 
-	if ((response[0] != 0) || (response[1] != 0)) {
-		intel_sdvo_hdmi_sink_detect(connector);
-		return connector_status_connected;
-	} else
+	if (response == 0)
 		return connector_status_disconnected;
+
+	if (intel_sdvo_multifunc_encoder(intel_output) &&
+		sdvo_priv->attached_output != response) {
+		if (sdvo_priv->controlled_output != response &&
+			intel_sdvo_output_setup(intel_output, response) != true)
+			return connector_status_unknown;
+		sdvo_priv->attached_output = response;
+	}
+	return intel_sdvo_hdmi_sink_detect(connector, response);
 }
 
 static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
@@ -1549,23 +1686,21 @@ static void intel_sdvo_get_tv_modes(struct drm_connector *connector)
 static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
 {
 	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	struct drm_display_mode *newmode;
 
 	/*
 	 * Attempt to get the mode list from DDC.
 	 * Assume that the preferred modes are
 	 * arranged in priority order.
 	 */
-	/* set the bus switch and get the modes */
-	intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
 	intel_ddc_get_modes(intel_output);
 	if (list_empty(&connector->probed_modes) == false)
-		return;
+		goto end;
 
 	/* Fetch modes from VBT */
 	if (dev_priv->sdvo_lvds_vbt_mode != NULL) {
-		struct drm_display_mode *newmode;
 		newmode = drm_mode_duplicate(connector->dev,
 					     dev_priv->sdvo_lvds_vbt_mode);
 		if (newmode != NULL) {
@@ -1575,6 +1710,16 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
 			drm_mode_probed_add(connector, newmode);
 		}
 	}
+
+end:
+	list_for_each_entry(newmode, &connector->probed_modes, head) {
+		if (newmode->type & DRM_MODE_TYPE_PREFERRED) {
+			sdvo_priv->sdvo_lvds_fixed_mode =
+				drm_mode_duplicate(connector->dev, newmode);
+			break;
+		}
+	}
+
 }
 
 static int intel_sdvo_get_modes(struct drm_connector *connector)
@@ -1597,14 +1742,20 @@ static int intel_sdvo_get_modes(struct drm_connector *connector)
 static void intel_sdvo_destroy(struct drm_connector *connector)
 {
 	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 
 	if (intel_output->i2c_bus)
 		intel_i2c_destroy(intel_output->i2c_bus);
 	if (intel_output->ddc_bus)
 		intel_i2c_destroy(intel_output->ddc_bus);
 
+	if (sdvo_priv->sdvo_lvds_fixed_mode != NULL)
+		drm_mode_destroy(connector->dev,
+				 sdvo_priv->sdvo_lvds_fixed_mode);
+
 	drm_sysfs_connector_remove(connector);
 	drm_connector_cleanup(connector);
+
 	kfree(intel_output);
 }
 
@@ -1709,7 +1860,7 @@ intel_sdvo_chan_to_intel_output(struct intel_i2c_chan *chan)
 
 	list_for_each_entry(connector,
 			&dev->mode_config.connector_list, head) {
-		if (to_intel_output(connector)->ddc_bus == chan) {
+		if (to_intel_output(connector)->ddc_bus == &chan->adapter) {
 			intel_output = to_intel_output(connector);
 			break;
 		}
@@ -1723,7 +1874,7 @@ static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap,
 	struct intel_output *intel_output;
 	struct intel_sdvo_priv *sdvo_priv;
 	struct i2c_algo_bit_data *algo_data;
-	struct i2c_algorithm *algo;
+	const struct i2c_algorithm *algo;
 
 	algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data;
 	intel_output =
@@ -1733,7 +1884,7 @@ static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap,
 		return -EINVAL;
 
 	sdvo_priv = intel_output->dev_priv;
-	algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo;
+	algo = intel_output->i2c_bus->algo;
 
 	intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
 	return algo->master_xfer(i2c_adap, msgs, num);
@@ -1780,18 +1931,112 @@ intel_sdvo_get_slave_addr(struct drm_device *dev, int output_device)
 		return 0x72;
 }
 
+static bool
+intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags)
+{
+	struct drm_connector *connector = &intel_output->base;
+	struct drm_encoder *encoder = &intel_output->enc;
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	bool ret = true, registered = false;
+
+	sdvo_priv->is_tv = false;
+	intel_output->needs_tv_clock = false;
+	sdvo_priv->is_lvds = false;
+
+	if (device_is_registered(&connector->kdev)) {
+		drm_sysfs_connector_remove(connector);
+		registered = true;
+	}
+
+	if (flags &
+	    (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
+		if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0)
+			sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS0;
+		else
+			sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1;
+
+		encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
+		connector->connector_type = DRM_MODE_CONNECTOR_DVID;
+
+		if (intel_sdvo_get_supp_encode(intel_output,
+					       &sdvo_priv->encode) &&
+		    intel_sdvo_get_digital_encoding_mode(intel_output) &&
+		    sdvo_priv->is_hdmi) {
+			/* enable hdmi encoding mode if supported */
+			intel_sdvo_set_encode(intel_output, SDVO_ENCODE_HDMI);
+			intel_sdvo_set_colorimetry(intel_output,
+						   SDVO_COLORIMETRY_RGB256);
+			connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+			intel_output->clone_mask =
+					(1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+					(1 << INTEL_ANALOG_CLONE_BIT);
+		}
+	} else if (flags & SDVO_OUTPUT_SVID0) {
+
+		sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0;
+		encoder->encoder_type = DRM_MODE_ENCODER_TVDAC;
+		connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
+		sdvo_priv->is_tv = true;
+		intel_output->needs_tv_clock = true;
+		intel_output->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
+	} else if (flags & SDVO_OUTPUT_RGB0) {
+
+		sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
+		encoder->encoder_type = DRM_MODE_ENCODER_DAC;
+		connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+		intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+					(1 << INTEL_ANALOG_CLONE_BIT);
+	} else if (flags & SDVO_OUTPUT_RGB1) {
+
+		sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
+		encoder->encoder_type = DRM_MODE_ENCODER_DAC;
+		connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+	} else if (flags & SDVO_OUTPUT_LVDS0) {
+
+		sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
+		encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
+		connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
+		sdvo_priv->is_lvds = true;
+		intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
+					(1 << INTEL_SDVO_LVDS_CLONE_BIT);
+	} else if (flags & SDVO_OUTPUT_LVDS1) {
+
+		sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
+		encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
+		connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
+		sdvo_priv->is_lvds = true;
+		intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
+					(1 << INTEL_SDVO_LVDS_CLONE_BIT);
+	} else {
+
+		unsigned char bytes[2];
+
+		sdvo_priv->controlled_output = 0;
+		memcpy(bytes, &sdvo_priv->caps.output_flags, 2);
+		DRM_DEBUG_KMS(I915_SDVO,
+				"%s: Unknown SDVO output type (0x%02x%02x)\n",
+				  SDVO_NAME(sdvo_priv),
+				  bytes[0], bytes[1]);
+		ret = false;
+	}
+	intel_output->crtc_mask = (1 << 0) | (1 << 1);
+
+	if (ret && registered)
+		ret = drm_sysfs_connector_add(connector) == 0 ? true : false;
+
+
+	return ret;
+
+}
+
 bool intel_sdvo_init(struct drm_device *dev, int output_device)
 {
 	struct drm_connector *connector;
 	struct intel_output *intel_output;
 	struct intel_sdvo_priv *sdvo_priv;
-	struct intel_i2c_chan *i2cbus = NULL;
-	struct intel_i2c_chan *ddcbus = NULL;
-	int connector_type;
+
 	u8 ch[0x40];
 	int i;
-	int encoder_type, output_id;
-	u8 slave_addr;
 
 	intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL);
 	if (!intel_output) {
@@ -1799,29 +2044,24 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 	}
 
 	sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1);
+	sdvo_priv->output_device = output_device;
+
+	intel_output->dev_priv = sdvo_priv;
 	intel_output->type = INTEL_OUTPUT_SDVO;
 
 	/* setup the DDC bus. */
 	if (output_device == SDVOB)
-		i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
+		intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
 	else
-		i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
+		intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
 
-	if (!i2cbus)
+	if (!intel_output->i2c_bus)
 		goto err_inteloutput;
 
-	slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
-	sdvo_priv->i2c_bus = i2cbus;
+	sdvo_priv->slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
 
-	if (output_device == SDVOB) {
-		output_id = 1;
-	} else {
-		output_id = 2;
-	}
-	sdvo_priv->i2c_bus->slave_addr = slave_addr >> 1;
-	sdvo_priv->output_device = output_device;
-	intel_output->i2c_bus = i2cbus;
-	intel_output->dev_priv = sdvo_priv;
+	/* Save the bit-banging i2c functionality for use by the DDC wrapper */
+	intel_sdvo_i2c_bit_algo.functionality = intel_output->i2c_bus->algo->functionality;
 
 	/* Read the regs to test if we can talk to the device */
 	for (i = 0; i < 0x40; i++) {
@@ -1835,101 +2075,39 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 
 	/* setup the DDC bus. */
 	if (output_device == SDVOB)
-		ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
+		intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
 	else
-		ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
+		intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
 
-	if (ddcbus == NULL)
+	if (intel_output->ddc_bus == NULL)
 		goto err_i2c;
 
-	intel_sdvo_i2c_bit_algo.functionality =
-		intel_output->i2c_bus->adapter.algo->functionality;
-	ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo;
-	intel_output->ddc_bus = ddcbus;
+	/* Wrap with our custom algo which switches to DDC mode */
+	intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo;
 
 	/* In defaut case sdvo lvds is false */
-	sdvo_priv->is_lvds = false;
 	intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps);
 
-	if (sdvo_priv->caps.output_flags &
-	    (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
-		if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0)
-			sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS0;
-		else
-			sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1;
-
-		encoder_type = DRM_MODE_ENCODER_TMDS;
-		connector_type = DRM_MODE_CONNECTOR_DVID;
-
-		if (intel_sdvo_get_supp_encode(intel_output,
-					       &sdvo_priv->encode) &&
-		    intel_sdvo_get_digital_encoding_mode(intel_output) &&
-		    sdvo_priv->is_hdmi) {
-			/* enable hdmi encoding mode if supported */
-			intel_sdvo_set_encode(intel_output, SDVO_ENCODE_HDMI);
-			intel_sdvo_set_colorimetry(intel_output,
-						   SDVO_COLORIMETRY_RGB256);
-			connector_type = DRM_MODE_CONNECTOR_HDMIA;
-		}
-	}
-	else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_SVID0)
-	{
-		sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0;
-		encoder_type = DRM_MODE_ENCODER_TVDAC;
-		connector_type = DRM_MODE_CONNECTOR_SVIDEO;
-		sdvo_priv->is_tv = true;
-		intel_output->needs_tv_clock = true;
-	}
-	else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0)
-	{
-		sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
-		encoder_type = DRM_MODE_ENCODER_DAC;
-		connector_type = DRM_MODE_CONNECTOR_VGA;
-	}
-	else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1)
-	{
-		sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
-		encoder_type = DRM_MODE_ENCODER_DAC;
-		connector_type = DRM_MODE_CONNECTOR_VGA;
-	}
-	else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS0)
-	{
-		sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
-		encoder_type = DRM_MODE_ENCODER_LVDS;
-		connector_type = DRM_MODE_CONNECTOR_LVDS;
-		sdvo_priv->is_lvds = true;
-	}
-	else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1)
-	{
-		sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
-		encoder_type = DRM_MODE_ENCODER_LVDS;
-		connector_type = DRM_MODE_CONNECTOR_LVDS;
-		sdvo_priv->is_lvds = true;
-	}
-	else
-	{
-		unsigned char bytes[2];
-
-		sdvo_priv->controlled_output = 0;
-		memcpy (bytes, &sdvo_priv->caps.output_flags, 2);
-		DRM_DEBUG_KMS(I915_SDVO,
-				"%s: Unknown SDVO output type (0x%02x%02x)\n",
-				  SDVO_NAME(sdvo_priv),
-				  bytes[0], bytes[1]);
-		encoder_type = DRM_MODE_ENCODER_NONE;
-		connector_type = DRM_MODE_CONNECTOR_Unknown;
+	if (intel_sdvo_output_setup(intel_output,
+				    sdvo_priv->caps.output_flags) != true) {
+		DRM_DEBUG("SDVO output failed to setup on SDVO%c\n",
+			  output_device == SDVOB ? 'B' : 'C');
 		goto err_i2c;
 	}
 
+
 	connector = &intel_output->base;
 	drm_connector_init(dev, connector, &intel_sdvo_connector_funcs,
-			   connector_type);
+			   connector->connector_type);
+
 	drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs);
 	connector->interlace_allowed = 0;
 	connector->doublescan_allowed = 0;
 	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 
-	drm_encoder_init(dev, &intel_output->enc, &intel_sdvo_enc_funcs, encoder_type);
+	drm_encoder_init(dev, &intel_output->enc,
+			&intel_sdvo_enc_funcs, intel_output->enc.encoder_type);
+
 	drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs);
 
 	drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
@@ -1965,9 +2143,10 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 	return true;
 
 err_i2c:
-	if (ddcbus != NULL)
+	if (intel_output->ddc_bus != NULL)
 		intel_i2c_destroy(intel_output->ddc_bus);
-	intel_i2c_destroy(intel_output->i2c_bus);
+	if (intel_output->i2c_bus != NULL)
+		intel_i2c_destroy(intel_output->i2c_bus);
 err_inteloutput:
 	kfree(intel_output);
 
diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h
index 193938b7d7f..ba5cdf8ae40 100644
--- a/drivers/gpu/drm/i915/intel_sdvo_regs.h
+++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h
@@ -715,6 +715,7 @@ struct intel_sdvo_enhancements_arg {
   #define SDVO_HBUF_TX_ONCE	(2 << 6)
   #define SDVO_HBUF_TX_VSYNC	(3 << 6)
 #define SDVO_CMD_GET_AUDIO_TX_INFO	0x9c
+#define SDVO_NEED_TO_STALL  (1 << 7)
 
 struct intel_sdvo_encode{
     u8 dvi_rev;
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index ea68992e441..5b1c9e9fdba 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1383,34 +1383,31 @@ intel_tv_detect_type (struct drm_crtc *crtc, struct intel_output *intel_output)
 	/*
 	 * Detect TV by polling)
 	 */
-	if (intel_output->load_detect_temp) {
-		/* TV not currently running, prod it with destructive detect */
-		save_tv_dac = tv_dac;
-		tv_ctl = I915_READ(TV_CTL);
-		save_tv_ctl = tv_ctl;
-		tv_ctl &= ~TV_ENC_ENABLE;
-		tv_ctl &= ~TV_TEST_MODE_MASK;
-		tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
-		tv_dac &= ~TVDAC_SENSE_MASK;
-		tv_dac &= ~DAC_A_MASK;
-		tv_dac &= ~DAC_B_MASK;
-		tv_dac &= ~DAC_C_MASK;
-		tv_dac |= (TVDAC_STATE_CHG_EN |
-			   TVDAC_A_SENSE_CTL |
-			   TVDAC_B_SENSE_CTL |
-			   TVDAC_C_SENSE_CTL |
-			   DAC_CTL_OVERRIDE |
-			   DAC_A_0_7_V |
-			   DAC_B_0_7_V |
-			   DAC_C_0_7_V);
-		I915_WRITE(TV_CTL, tv_ctl);
-		I915_WRITE(TV_DAC, tv_dac);
-		intel_wait_for_vblank(dev);
-		tv_dac = I915_READ(TV_DAC);
-		I915_WRITE(TV_DAC, save_tv_dac);
-		I915_WRITE(TV_CTL, save_tv_ctl);
-		intel_wait_for_vblank(dev);
-	}
+	save_tv_dac = tv_dac;
+	tv_ctl = I915_READ(TV_CTL);
+	save_tv_ctl = tv_ctl;
+	tv_ctl &= ~TV_ENC_ENABLE;
+	tv_ctl &= ~TV_TEST_MODE_MASK;
+	tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
+	tv_dac &= ~TVDAC_SENSE_MASK;
+	tv_dac &= ~DAC_A_MASK;
+	tv_dac &= ~DAC_B_MASK;
+	tv_dac &= ~DAC_C_MASK;
+	tv_dac |= (TVDAC_STATE_CHG_EN |
+		   TVDAC_A_SENSE_CTL |
+		   TVDAC_B_SENSE_CTL |
+		   TVDAC_C_SENSE_CTL |
+		   DAC_CTL_OVERRIDE |
+		   DAC_A_0_7_V |
+		   DAC_B_0_7_V |
+		   DAC_C_0_7_V);
+	I915_WRITE(TV_CTL, tv_ctl);
+	I915_WRITE(TV_DAC, tv_dac);
+	intel_wait_for_vblank(dev);
+	tv_dac = I915_READ(TV_DAC);
+	I915_WRITE(TV_DAC, save_tv_dac);
+	I915_WRITE(TV_CTL, save_tv_ctl);
+	intel_wait_for_vblank(dev);
 	/*
 	 *  A B C
 	 *  0 1 1 Composite
@@ -1493,6 +1490,27 @@ static struct input_res {
 	{"1920x1080", 1920, 1080},
 };
 
+/*
+ * Chose preferred mode  according to line number of TV format
+ */
+static void
+intel_tv_chose_preferred_modes(struct drm_connector *connector,
+			       struct drm_display_mode *mode_ptr)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output);
+
+	if (tv_mode->nbr_end < 480 && mode_ptr->vdisplay == 480)
+		mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+	else if (tv_mode->nbr_end > 480) {
+		if (tv_mode->progressive == true && tv_mode->nbr_end < 720) {
+			if (mode_ptr->vdisplay == 720)
+				mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+		} else if (mode_ptr->vdisplay == 1080)
+				mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+	}
+}
+
 /**
  * Stub get_modes function.
  *
@@ -1547,6 +1565,7 @@ intel_tv_get_modes(struct drm_connector *connector)
 		mode_ptr->clock = (int) tmp;
 
 		mode_ptr->type = DRM_MODE_TYPE_DRIVER;
+		intel_tv_chose_preferred_modes(connector, mode_ptr);
 		drm_mode_probed_add(connector, mode_ptr);
 		count++;
 	}
@@ -1699,6 +1718,7 @@ intel_tv_init(struct drm_device *dev)
 	if (!intel_output) {
 		return;
 	}
+
 	connector = &intel_output->base;
 
 	drm_connector_init(dev, connector, &intel_tv_connector_funcs,
@@ -1710,6 +1730,8 @@ intel_tv_init(struct drm_device *dev)
 	drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
 	tv_priv = (struct intel_tv_priv *)(intel_output + 1);
 	intel_output->type = INTEL_OUTPUT_TVOUT;
+	intel_output->crtc_mask = (1 << 0) | (1 << 1);
+	intel_output->clone_mask = (1 << INTEL_TV_CLONE_BIT);
 	intel_output->enc.possible_crtcs = ((1 << 0) | (1 << 1));
 	intel_output->enc.possible_clones = (1 << INTEL_OUTPUT_TVOUT);
 	intel_output->dev_priv = tv_priv;
diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile
index 5fae1e074b4..013d3805994 100644
--- a/drivers/gpu/drm/radeon/Makefile
+++ b/drivers/gpu/drm/radeon/Makefile
@@ -13,7 +13,8 @@ radeon-$(CONFIG_DRM_RADEON_KMS) += radeon_device.o radeon_kms.o \
 	radeon_encoders.o radeon_display.o radeon_cursor.o radeon_i2c.o \
 	radeon_clocks.o radeon_fb.o radeon_gem.o radeon_ring.o radeon_irq_kms.o \
 	radeon_cs.o radeon_bios.o radeon_benchmark.o r100.o r300.o r420.o \
-	rs400.o rs600.o rs690.o rv515.o r520.o r600.o rs780.o rv770.o
+	rs400.o rs600.o rs690.o rv515.o r520.o r600.o rs780.o rv770.o \
+	radeon_test.o
 
 radeon-$(CONFIG_COMPAT) += radeon_ioc32.o
 
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index c0080cc9bf8..74d034f77c6 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -31,6 +31,132 @@
 #include "atom.h"
 #include "atom-bits.h"
 
+static void atombios_overscan_setup(struct drm_crtc *crtc,
+				    struct drm_display_mode *mode,
+				    struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	SET_CRTC_OVERSCAN_PS_ALLOCATION args;
+	int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_OverScan);
+	int a1, a2;
+
+	memset(&args, 0, sizeof(args));
+
+	args.usOverscanRight = 0;
+	args.usOverscanLeft = 0;
+	args.usOverscanBottom = 0;
+	args.usOverscanTop = 0;
+	args.ucCRTC = radeon_crtc->crtc_id;
+
+	switch (radeon_crtc->rmx_type) {
+	case RMX_CENTER:
+		args.usOverscanTop = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
+		args.usOverscanBottom = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
+		args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
+		args.usOverscanRight = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
+		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+		break;
+	case RMX_ASPECT:
+		a1 = mode->crtc_vdisplay * adjusted_mode->crtc_hdisplay;
+		a2 = adjusted_mode->crtc_vdisplay * mode->crtc_hdisplay;
+
+		if (a1 > a2) {
+			args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
+			args.usOverscanRight = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
+		} else if (a2 > a1) {
+			args.usOverscanLeft = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
+			args.usOverscanRight = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
+		}
+		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+		break;
+	case RMX_FULL:
+	default:
+		args.usOverscanRight = 0;
+		args.usOverscanLeft = 0;
+		args.usOverscanBottom = 0;
+		args.usOverscanTop = 0;
+		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+		break;
+	}
+}
+
+static void atombios_scaler_setup(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	ENABLE_SCALER_PS_ALLOCATION args;
+	int index = GetIndexIntoMasterTable(COMMAND, EnableScaler);
+	/* fixme - fill in enc_priv for atom dac */
+	enum radeon_tv_std tv_std = TV_STD_NTSC;
+
+	if (!ASIC_IS_AVIVO(rdev) && radeon_crtc->crtc_id)
+		return;
+
+	memset(&args, 0, sizeof(args));
+
+	args.ucScaler = radeon_crtc->crtc_id;
+
+	if (radeon_crtc->devices & (ATOM_DEVICE_TV_SUPPORT)) {
+		switch (tv_std) {
+		case TV_STD_NTSC:
+		default:
+			args.ucTVStandard = ATOM_TV_NTSC;
+			break;
+		case TV_STD_PAL:
+			args.ucTVStandard = ATOM_TV_PAL;
+			break;
+		case TV_STD_PAL_M:
+			args.ucTVStandard = ATOM_TV_PALM;
+			break;
+		case TV_STD_PAL_60:
+			args.ucTVStandard = ATOM_TV_PAL60;
+			break;
+		case TV_STD_NTSC_J:
+			args.ucTVStandard = ATOM_TV_NTSCJ;
+			break;
+		case TV_STD_SCART_PAL:
+			args.ucTVStandard = ATOM_TV_PAL; /* ??? */
+			break;
+		case TV_STD_SECAM:
+			args.ucTVStandard = ATOM_TV_SECAM;
+			break;
+		case TV_STD_PAL_CN:
+			args.ucTVStandard = ATOM_TV_PALCN;
+			break;
+		}
+		args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
+	} else if (radeon_crtc->devices & (ATOM_DEVICE_CV_SUPPORT)) {
+		args.ucTVStandard = ATOM_TV_CV;
+		args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
+	} else {
+		switch (radeon_crtc->rmx_type) {
+		case RMX_FULL:
+			args.ucEnable = ATOM_SCALER_EXPANSION;
+			break;
+		case RMX_CENTER:
+			args.ucEnable = ATOM_SCALER_CENTER;
+			break;
+		case RMX_ASPECT:
+			args.ucEnable = ATOM_SCALER_EXPANSION;
+			break;
+		default:
+			if (ASIC_IS_AVIVO(rdev))
+				args.ucEnable = ATOM_SCALER_DISABLE;
+			else
+				args.ucEnable = ATOM_SCALER_CENTER;
+			break;
+		}
+	}
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+	if (radeon_crtc->devices & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)
+	    && rdev->family >= CHIP_RV515 && rdev->family <= CHIP_RV570) {
+		atom_rv515_force_tv_scaler(rdev);
+	}
+}
+
 static void atombios_lock_crtc(struct drm_crtc *crtc, int lock)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
@@ -203,6 +329,12 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
 	if (ASIC_IS_AVIVO(rdev)) {
 		uint32_t ss_cntl;
 
+		if ((rdev->family == CHIP_RS600) ||
+		    (rdev->family == CHIP_RS690) ||
+		    (rdev->family == CHIP_RS740))
+			pll_flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
+				      RADEON_PLL_PREFER_CLOSEST_LOWER);
+
 		if (ASIC_IS_DCE32(rdev) && mode->clock > 200000)	/* range limits??? */
 			pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
 		else
@@ -321,7 +453,7 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 	struct drm_gem_object *obj;
 	struct drm_radeon_gem_object *obj_priv;
 	uint64_t fb_location;
-	uint32_t fb_format, fb_pitch_pixels;
+	uint32_t fb_format, fb_pitch_pixels, tiling_flags;
 
 	if (!crtc->fb)
 		return -EINVAL;
@@ -358,7 +490,14 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 		return -EINVAL;
 	}
 
-	/* TODO tiling */
+	radeon_object_get_tiling_flags(obj->driver_private,
+				       &tiling_flags, NULL);
+	if (tiling_flags & RADEON_TILING_MACRO)
+		fb_format |= AVIVO_D1GRPH_MACRO_ADDRESS_MODE;
+
+	if (tiling_flags & RADEON_TILING_MICRO)
+		fb_format |= AVIVO_D1GRPH_TILED;
+
 	if (radeon_crtc->crtc_id == 0)
 		WREG32(AVIVO_D1VGA_CONTROL, 0);
 	else
@@ -509,6 +648,9 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc,
 		radeon_crtc_set_base(crtc, x, y, old_fb);
 		radeon_legacy_atom_set_surface(crtc);
 	}
+	atombios_overscan_setup(crtc, mode, adjusted_mode);
+	atombios_scaler_setup(crtc);
+	radeon_bandwidth_update(rdev);
 	return 0;
 }
 
@@ -516,6 +658,8 @@ static bool atombios_crtc_mode_fixup(struct drm_crtc *crtc,
 				     struct drm_display_mode *mode,
 				     struct drm_display_mode *adjusted_mode)
 {
+	if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
+		return false;
 	return true;
 }
 
@@ -548,148 +692,3 @@ void radeon_atombios_init_crtc(struct drm_device *dev,
 		    AVIVO_D2CRTC_H_TOTAL - AVIVO_D1CRTC_H_TOTAL;
 	drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
 }
-
-void radeon_init_disp_bw_avivo(struct drm_device *dev,
-			       struct drm_display_mode *mode1,
-			       uint32_t pixel_bytes1,
-			       struct drm_display_mode *mode2,
-			       uint32_t pixel_bytes2)
-{
-	struct radeon_device *rdev = dev->dev_private;
-	fixed20_12 min_mem_eff;
-	fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff;
-	fixed20_12 sclk_ff, mclk_ff;
-	uint32_t dc_lb_memory_split, temp;
-
-	min_mem_eff.full = rfixed_const_8(0);
-	if (rdev->disp_priority == 2) {
-		uint32_t mc_init_misc_lat_timer = 0;
-		if (rdev->family == CHIP_RV515)
-			mc_init_misc_lat_timer =
-			    RREG32_MC(RV515_MC_INIT_MISC_LAT_TIMER);
-		else if (rdev->family == CHIP_RS690)
-			mc_init_misc_lat_timer =
-			    RREG32_MC(RS690_MC_INIT_MISC_LAT_TIMER);
-
-		mc_init_misc_lat_timer &=
-		    ~(R300_MC_DISP1R_INIT_LAT_MASK <<
-		      R300_MC_DISP1R_INIT_LAT_SHIFT);
-		mc_init_misc_lat_timer &=
-		    ~(R300_MC_DISP0R_INIT_LAT_MASK <<
-		      R300_MC_DISP0R_INIT_LAT_SHIFT);
-
-		if (mode2)
-			mc_init_misc_lat_timer |=
-			    (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
-		if (mode1)
-			mc_init_misc_lat_timer |=
-			    (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
-
-		if (rdev->family == CHIP_RV515)
-			WREG32_MC(RV515_MC_INIT_MISC_LAT_TIMER,
-				  mc_init_misc_lat_timer);
-		else if (rdev->family == CHIP_RS690)
-			WREG32_MC(RS690_MC_INIT_MISC_LAT_TIMER,
-				  mc_init_misc_lat_timer);
-	}
-
-	/*
-	 * determine is there is enough bw for current mode
-	 */
-	temp_ff.full = rfixed_const(100);
-	mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
-	mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
-	sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
-	sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
-
-	temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
-	temp_ff.full = rfixed_const(temp);
-	mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
-	mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
-
-	pix_clk.full = 0;
-	pix_clk2.full = 0;
-	peak_disp_bw.full = 0;
-	if (mode1) {
-		temp_ff.full = rfixed_const(1000);
-		pix_clk.full = rfixed_const(mode1->clock);	/* convert to fixed point */
-		pix_clk.full = rfixed_div(pix_clk, temp_ff);
-		temp_ff.full = rfixed_const(pixel_bytes1);
-		peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
-	}
-	if (mode2) {
-		temp_ff.full = rfixed_const(1000);
-		pix_clk2.full = rfixed_const(mode2->clock);	/* convert to fixed point */
-		pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
-		temp_ff.full = rfixed_const(pixel_bytes2);
-		peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
-	}
-
-	if (peak_disp_bw.full >= mem_bw.full) {
-		DRM_ERROR
-		    ("You may not have enough display bandwidth for current mode\n"
-		     "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
-		printk("peak disp bw %d, mem_bw %d\n",
-		       rfixed_trunc(peak_disp_bw), rfixed_trunc(mem_bw));
-	}
-
-	/*
-	 * Line Buffer Setup
-	 * There is a single line buffer shared by both display controllers.
-	 * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between the display
-	 * controllers.  The paritioning can either be done manually or via one of four
-	 * preset allocations specified in bits 1:0:
-	 * 0 - line buffer is divided in half and shared between each display controller
-	 * 1 - D1 gets 3/4 of the line buffer, D2 gets 1/4
-	 * 2 - D1 gets the whole buffer
-	 * 3 - D1 gets 1/4 of the line buffer, D2 gets 3/4
-	 * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual allocation mode.
-	 * In manual allocation mode, D1 always starts at 0, D1 end/2 is specified in bits
-	 * 14:4; D2 allocation follows D1.
-	 */
-
-	/* is auto or manual better ? */
-	dc_lb_memory_split =
-	    RREG32(AVIVO_DC_LB_MEMORY_SPLIT) & ~AVIVO_DC_LB_MEMORY_SPLIT_MASK;
-	dc_lb_memory_split &= ~AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE;
-#if 1
-	/* auto */
-	if (mode1 && mode2) {
-		if (mode1->hdisplay > mode2->hdisplay) {
-			if (mode1->hdisplay > 2560)
-				dc_lb_memory_split |=
-				    AVIVO_DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
-			else
-				dc_lb_memory_split |=
-				    AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
-		} else if (mode2->hdisplay > mode1->hdisplay) {
-			if (mode2->hdisplay > 2560)
-				dc_lb_memory_split |=
-				    AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
-			else
-				dc_lb_memory_split |=
-				    AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
-		} else
-			dc_lb_memory_split |=
-			    AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
-	} else if (mode1) {
-		dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_D1_ONLY;
-	} else if (mode2) {
-		dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
-	}
-#else
-	/* manual */
-	dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE;
-	dc_lb_memory_split &=
-	    ~(AVIVO_DC_LB_DISP1_END_ADR_MASK <<
-	      AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
-	if (mode1) {
-		dc_lb_memory_split |=
-		    ((((mode1->hdisplay / 2) + 64) & AVIVO_DC_LB_DISP1_END_ADR_MASK)
-		     << AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
-	} else if (mode2) {
-		dc_lb_memory_split |= (0 << AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
-	}
-#endif
-	WREG32(AVIVO_DC_LB_MEMORY_SPLIT, dc_lb_memory_split);
-}
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index c550932a108..68e728e8be4 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -110,7 +110,7 @@ int r100_pci_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 	if (i < 0 || i > rdev->gart.num_gpu_pages) {
 		return -EINVAL;
 	}
-	rdev->gart.table.ram.ptr[i] = cpu_to_le32((uint32_t)addr);
+	rdev->gart.table.ram.ptr[i] = cpu_to_le32(lower_32_bits(addr));
 	return 0;
 }
 
@@ -173,8 +173,12 @@ void r100_mc_setup(struct radeon_device *rdev)
 		DRM_ERROR("Failed to register debugfs file for R100 MC !\n");
 	}
 	/* Write VRAM size in case we are limiting it */
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+	/* Novell bug 204882 for RN50/M6/M7 with 8/16/32MB VRAM,
+	 * if the aperture is 64MB but we have 32MB VRAM
+	 * we report only 32MB VRAM but we have to set MC_FB_LOCATION
+	 * to 64MB, otherwise the gpu accidentially dies */
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
 	tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
 	WREG32(RADEON_MC_FB_LOCATION, tmp);
@@ -215,7 +219,6 @@ int r100_mc_init(struct radeon_device *rdev)
 	r100_pci_gart_disable(rdev);
 
 	/* Setup GPU memory space */
-	rdev->mc.vram_location = 0xFFFFFFFFUL;
 	rdev->mc.gtt_location = 0xFFFFFFFFUL;
 	if (rdev->flags & RADEON_IS_AGP) {
 		r = radeon_agp_init(rdev);
@@ -251,6 +254,72 @@ void r100_mc_fini(struct radeon_device *rdev)
 
 
 /*
+ * Interrupts
+ */
+int r100_irq_set(struct radeon_device *rdev)
+{
+	uint32_t tmp = 0;
+
+	if (rdev->irq.sw_int) {
+		tmp |= RADEON_SW_INT_ENABLE;
+	}
+	if (rdev->irq.crtc_vblank_int[0]) {
+		tmp |= RADEON_CRTC_VBLANK_MASK;
+	}
+	if (rdev->irq.crtc_vblank_int[1]) {
+		tmp |= RADEON_CRTC2_VBLANK_MASK;
+	}
+	WREG32(RADEON_GEN_INT_CNTL, tmp);
+	return 0;
+}
+
+static inline uint32_t r100_irq_ack(struct radeon_device *rdev)
+{
+	uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS);
+	uint32_t irq_mask = RADEON_SW_INT_TEST | RADEON_CRTC_VBLANK_STAT |
+		RADEON_CRTC2_VBLANK_STAT;
+
+	if (irqs) {
+		WREG32(RADEON_GEN_INT_STATUS, irqs);
+	}
+	return irqs & irq_mask;
+}
+
+int r100_irq_process(struct radeon_device *rdev)
+{
+	uint32_t status;
+
+	status = r100_irq_ack(rdev);
+	if (!status) {
+		return IRQ_NONE;
+	}
+	while (status) {
+		/* SW interrupt */
+		if (status & RADEON_SW_INT_TEST) {
+			radeon_fence_process(rdev);
+		}
+		/* Vertical blank interrupts */
+		if (status & RADEON_CRTC_VBLANK_STAT) {
+			drm_handle_vblank(rdev->ddev, 0);
+		}
+		if (status & RADEON_CRTC2_VBLANK_STAT) {
+			drm_handle_vblank(rdev->ddev, 1);
+		}
+		status = r100_irq_ack(rdev);
+	}
+	return IRQ_HANDLED;
+}
+
+u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc)
+{
+	if (crtc == 0)
+		return RREG32(RADEON_CRTC_CRNT_FRAME);
+	else
+		return RREG32(RADEON_CRTC2_CRNT_FRAME);
+}
+
+
+/*
  * Fence emission
  */
 void r100_fence_ring_emit(struct radeon_device *rdev,
@@ -719,13 +788,14 @@ int r100_cs_packet_parse(struct radeon_cs_parser *p,
 			 unsigned idx)
 {
 	struct radeon_cs_chunk *ib_chunk = &p->chunks[p->chunk_ib_idx];
-	uint32_t header = ib_chunk->kdata[idx];
+	uint32_t header;
 
 	if (idx >= ib_chunk->length_dw) {
 		DRM_ERROR("Can not parse packet at %d after CS end %d !\n",
 			  idx, ib_chunk->length_dw);
 		return -EINVAL;
 	}
+	header = ib_chunk->kdata[idx];
 	pkt->idx = idx;
 	pkt->type = CP_PACKET_GET_TYPE(header);
 	pkt->count = CP_PACKET_GET_COUNT(header);
@@ -753,6 +823,102 @@ int r100_cs_packet_parse(struct radeon_cs_parser *p,
 }
 
 /**
+ * r100_cs_packet_next_vline() - parse userspace VLINE packet
+ * @parser:		parser structure holding parsing context.
+ *
+ * Userspace sends a special sequence for VLINE waits.
+ * PACKET0 - VLINE_START_END + value
+ * PACKET0 - WAIT_UNTIL +_value
+ * RELOC (P3) - crtc_id in reloc.
+ *
+ * This function parses this and relocates the VLINE START END
+ * and WAIT UNTIL packets to the correct crtc.
+ * It also detects a switched off crtc and nulls out the
+ * wait in that case.
+ */
+int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
+{
+	struct radeon_cs_chunk *ib_chunk;
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc;
+	struct radeon_crtc *radeon_crtc;
+	struct radeon_cs_packet p3reloc, waitreloc;
+	int crtc_id;
+	int r;
+	uint32_t header, h_idx, reg;
+
+	ib_chunk = &p->chunks[p->chunk_ib_idx];
+
+	/* parse the wait until */
+	r = r100_cs_packet_parse(p, &waitreloc, p->idx);
+	if (r)
+		return r;
+
+	/* check its a wait until and only 1 count */
+	if (waitreloc.reg != RADEON_WAIT_UNTIL ||
+	    waitreloc.count != 0) {
+		DRM_ERROR("vline wait had illegal wait until segment\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	if (ib_chunk->kdata[waitreloc.idx + 1] != RADEON_WAIT_CRTC_VLINE) {
+		DRM_ERROR("vline wait had illegal wait until\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	/* jump over the NOP */
+	r = r100_cs_packet_parse(p, &p3reloc, p->idx);
+	if (r)
+		return r;
+
+	h_idx = p->idx - 2;
+	p->idx += waitreloc.count;
+	p->idx += p3reloc.count;
+
+	header = ib_chunk->kdata[h_idx];
+	crtc_id = ib_chunk->kdata[h_idx + 5];
+	reg = ib_chunk->kdata[h_idx] >> 2;
+	mutex_lock(&p->rdev->ddev->mode_config.mutex);
+	obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		DRM_ERROR("cannot find crtc %d\n", crtc_id);
+		r = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+	radeon_crtc = to_radeon_crtc(crtc);
+	crtc_id = radeon_crtc->crtc_id;
+
+	if (!crtc->enabled) {
+		/* if the CRTC isn't enabled - we need to nop out the wait until */
+		ib_chunk->kdata[h_idx + 2] = PACKET2(0);
+		ib_chunk->kdata[h_idx + 3] = PACKET2(0);
+	} else if (crtc_id == 1) {
+		switch (reg) {
+		case AVIVO_D1MODE_VLINE_START_END:
+			header &= R300_CP_PACKET0_REG_MASK;
+			header |= AVIVO_D2MODE_VLINE_START_END >> 2;
+			break;
+		case RADEON_CRTC_GUI_TRIG_VLINE:
+			header &= R300_CP_PACKET0_REG_MASK;
+			header |= RADEON_CRTC2_GUI_TRIG_VLINE >> 2;
+			break;
+		default:
+			DRM_ERROR("unknown crtc reloc\n");
+			r = -EINVAL;
+			goto out;
+		}
+		ib_chunk->kdata[h_idx] = header;
+		ib_chunk->kdata[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
+	}
+out:
+	mutex_unlock(&p->rdev->ddev->mode_config.mutex);
+	return r;
+}
+
+/**
  * r100_cs_packet_next_reloc() - parse next packet which should be reloc packet3
  * @parser:		parser structure holding parsing context.
  * @data:		pointer to relocation data
@@ -814,6 +980,7 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 	unsigned idx;
 	bool onereg;
 	int r;
+	u32 tile_flags = 0;
 
 	ib = p->ib->ptr;
 	ib_chunk = &p->chunks[p->chunk_ib_idx];
@@ -825,6 +992,15 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 	}
 	for (i = 0; i <= pkt->count; i++, idx++, reg += 4) {
 		switch (reg) {
+		case RADEON_CRTC_GUI_TRIG_VLINE:
+			r = r100_cs_packet_parse_vline(p);
+			if (r) {
+				DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+						idx, reg);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+			break;
 		/* FIXME: only allow PACKET3 blit? easier to check for out of
 		 * range access */
 		case RADEON_DST_PITCH_OFFSET:
@@ -838,7 +1014,20 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 			}
 			tmp = ib_chunk->kdata[idx] & 0x003fffff;
 			tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
-			ib[idx] = (ib_chunk->kdata[idx] & 0xffc00000) | tmp;
+
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+				tile_flags |= RADEON_DST_TILE_MACRO;
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+				if (reg == RADEON_SRC_PITCH_OFFSET) {
+					DRM_ERROR("Cannot src blit from microtiled surface\n");
+					r100_cs_dump_packet(p, pkt);
+					return -EINVAL;
+				}
+				tile_flags |= RADEON_DST_TILE_MICRO;
+			}
+
+			tmp |= tile_flags;
+			ib[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp;
 			break;
 		case RADEON_RB3D_DEPTHOFFSET:
 		case RADEON_RB3D_COLOROFFSET:
@@ -869,6 +1058,40 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 		case R300_TX_OFFSET_0+52:
 		case R300_TX_OFFSET_0+56:
 		case R300_TX_OFFSET_0+60:
+			/* rn50 has no 3D engine so fail on any 3d setup */
+			if (ASIC_IS_RN50(p->rdev)) {
+				DRM_ERROR("attempt to use RN50 3D engine failed\n");
+				return -EINVAL;
+			}
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					  idx, reg);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+			ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+			break;
+		case R300_RB3D_COLORPITCH0:
+		case RADEON_RB3D_COLORPITCH:
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					  idx, reg);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+				tile_flags |= RADEON_COLOR_TILE_ENABLE;
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+				tile_flags |= RADEON_COLOR_MICROTILE_ENABLE;
+
+			tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+			tmp |= tile_flags;
+			ib[idx] = tmp;
+			break;
+		case RADEON_RB3D_ZPASS_ADDR:
 			r = r100_cs_packet_next_reloc(p, &reloc);
 			if (r) {
 				DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
@@ -1256,29 +1479,100 @@ static void r100_vram_get_type(struct radeon_device *rdev)
 	}
 }
 
-void r100_vram_info(struct radeon_device *rdev)
+static u32 r100_get_accessible_vram(struct radeon_device *rdev)
 {
-	r100_vram_get_type(rdev);
+	u32 aper_size;
+	u8 byte;
+
+	aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
+
+	/* Set HDP_APER_CNTL only on cards that are known not to be broken,
+	 * that is has the 2nd generation multifunction PCI interface
+	 */
+	if (rdev->family == CHIP_RV280 ||
+	    rdev->family >= CHIP_RV350) {
+		WREG32_P(RADEON_HOST_PATH_CNTL, RADEON_HDP_APER_CNTL,
+		       ~RADEON_HDP_APER_CNTL);
+		DRM_INFO("Generation 2 PCI interface, using max accessible memory\n");
+		return aper_size * 2;
+	}
+
+	/* Older cards have all sorts of funny issues to deal with. First
+	 * check if it's a multifunction card by reading the PCI config
+	 * header type... Limit those to one aperture size
+	 */
+	pci_read_config_byte(rdev->pdev, 0xe, &byte);
+	if (byte & 0x80) {
+		DRM_INFO("Generation 1 PCI interface in multifunction mode\n");
+		DRM_INFO("Limiting VRAM to one aperture\n");
+		return aper_size;
+	}
+
+	/* Single function older card. We read HDP_APER_CNTL to see how the BIOS
+	 * have set it up. We don't write this as it's broken on some ASICs but
+	 * we expect the BIOS to have done the right thing (might be too optimistic...)
+	 */
+	if (RREG32(RADEON_HOST_PATH_CNTL) & RADEON_HDP_APER_CNTL)
+		return aper_size * 2;
+	return aper_size;
+}
+
+void r100_vram_init_sizes(struct radeon_device *rdev)
+{
+	u64 config_aper_size;
+	u32 accessible;
+
+	config_aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
 
 	if (rdev->flags & RADEON_IS_IGP) {
 		uint32_t tom;
 		/* read NB_TOM to get the amount of ram stolen for the GPU */
 		tom = RREG32(RADEON_NB_TOM);
-		rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
-		WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+		rdev->mc.real_vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
+		/* for IGPs we need to keep VRAM where it was put by the BIOS */
+		rdev->mc.vram_location = (tom & 0xffff) << 16;
+		WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+		rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
 	} else {
-		rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+		rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
 		/* Some production boards of m6 will report 0
 		 * if it's 8 MB
 		 */
-		if (rdev->mc.vram_size == 0) {
-			rdev->mc.vram_size = 8192 * 1024;
-			WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+		if (rdev->mc.real_vram_size == 0) {
+			rdev->mc.real_vram_size = 8192 * 1024;
+			WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
 		}
+		/* let driver place VRAM */
+		rdev->mc.vram_location = 0xFFFFFFFFUL;
+		 /* Fix for RN50, M6, M7 with 8/16/32(??) MBs of VRAM - 
+		  * Novell bug 204882 + along with lots of ubuntu ones */
+		if (config_aper_size > rdev->mc.real_vram_size)
+			rdev->mc.mc_vram_size = config_aper_size;
+		else
+			rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
 	}
 
+	/* work out accessible VRAM */
+	accessible = r100_get_accessible_vram(rdev);
+
 	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
 	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+
+	if (accessible > rdev->mc.aper_size)
+		accessible = rdev->mc.aper_size;
+
+	if (rdev->mc.mc_vram_size > rdev->mc.aper_size)
+		rdev->mc.mc_vram_size = rdev->mc.aper_size;
+
+	if (rdev->mc.real_vram_size > rdev->mc.aper_size)
+		rdev->mc.real_vram_size = rdev->mc.aper_size;
+}
+
+void r100_vram_info(struct radeon_device *rdev)
+{
+	r100_vram_get_type(rdev);
+
+	r100_vram_init_sizes(rdev);
 }
 
 
@@ -1338,26 +1632,6 @@ void r100_pll_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 	r100_pll_errata_after_data(rdev);
 }
 
-uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg)
-{
-	if (reg < 0x10000)
-		return readl(((void __iomem *)rdev->rmmio) + reg);
-	else {
-		writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
-		return readl(((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
-	}
-}
-
-void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
-{
-	if (reg < 0x10000)
-		writel(v, ((void __iomem *)rdev->rmmio) + reg);
-	else {
-		writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
-		writel(v, ((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
-	}
-}
-
 int r100_init(struct radeon_device *rdev)
 {
 	return 0;
@@ -1533,3 +1807,530 @@ int r100_debugfs_mc_info_init(struct radeon_device *rdev)
 	return 0;
 #endif
 }
+
+int r100_set_surface_reg(struct radeon_device *rdev, int reg,
+			 uint32_t tiling_flags, uint32_t pitch,
+			 uint32_t offset, uint32_t obj_size)
+{
+	int surf_index = reg * 16;
+	int flags = 0;
+
+	/* r100/r200 divide by 16 */
+	if (rdev->family < CHIP_R300)
+		flags = pitch / 16;
+	else
+		flags = pitch / 8;
+
+	if (rdev->family <= CHIP_RS200) {
+		if ((tiling_flags & (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
+				 == (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
+			flags |= RADEON_SURF_TILE_COLOR_BOTH;
+		if (tiling_flags & RADEON_TILING_MACRO)
+			flags |= RADEON_SURF_TILE_COLOR_MACRO;
+	} else if (rdev->family <= CHIP_RV280) {
+		if (tiling_flags & (RADEON_TILING_MACRO))
+			flags |= R200_SURF_TILE_COLOR_MACRO;
+		if (tiling_flags & RADEON_TILING_MICRO)
+			flags |= R200_SURF_TILE_COLOR_MICRO;
+	} else {
+		if (tiling_flags & RADEON_TILING_MACRO)
+			flags |= R300_SURF_TILE_MACRO;
+		if (tiling_flags & RADEON_TILING_MICRO)
+			flags |= R300_SURF_TILE_MICRO;
+	}
+
+	DRM_DEBUG("writing surface %d %d %x %x\n", reg, flags, offset, offset+obj_size-1);
+	WREG32(RADEON_SURFACE0_INFO + surf_index, flags);
+	WREG32(RADEON_SURFACE0_LOWER_BOUND + surf_index, offset);
+	WREG32(RADEON_SURFACE0_UPPER_BOUND + surf_index, offset + obj_size - 1);
+	return 0;
+}
+
+void r100_clear_surface_reg(struct radeon_device *rdev, int reg)
+{
+	int surf_index = reg * 16;
+	WREG32(RADEON_SURFACE0_INFO + surf_index, 0);
+}
+
+void r100_bandwidth_update(struct radeon_device *rdev)
+{
+	fixed20_12 trcd_ff, trp_ff, tras_ff, trbs_ff, tcas_ff;
+	fixed20_12 sclk_ff, mclk_ff, sclk_eff_ff, sclk_delay_ff;
+	fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff;
+	uint32_t temp, data, mem_trcd, mem_trp, mem_tras;
+	fixed20_12 memtcas_ff[8] = {
+		fixed_init(1),
+		fixed_init(2),
+		fixed_init(3),
+		fixed_init(0),
+		fixed_init_half(1),
+		fixed_init_half(2),
+		fixed_init(0),
+	};
+	fixed20_12 memtcas_rs480_ff[8] = {
+		fixed_init(0),
+		fixed_init(1),
+		fixed_init(2),
+		fixed_init(3),
+		fixed_init(0),
+		fixed_init_half(1),
+		fixed_init_half(2),
+		fixed_init_half(3),
+	};
+	fixed20_12 memtcas2_ff[8] = {
+		fixed_init(0),
+		fixed_init(1),
+		fixed_init(2),
+		fixed_init(3),
+		fixed_init(4),
+		fixed_init(5),
+		fixed_init(6),
+		fixed_init(7),
+	};
+	fixed20_12 memtrbs[8] = {
+		fixed_init(1),
+		fixed_init_half(1),
+		fixed_init(2),
+		fixed_init_half(2),
+		fixed_init(3),
+		fixed_init_half(3),
+		fixed_init(4),
+		fixed_init_half(4)
+	};
+	fixed20_12 memtrbs_r4xx[8] = {
+		fixed_init(4),
+		fixed_init(5),
+		fixed_init(6),
+		fixed_init(7),
+		fixed_init(8),
+		fixed_init(9),
+		fixed_init(10),
+		fixed_init(11)
+	};
+	fixed20_12 min_mem_eff;
+	fixed20_12 mc_latency_sclk, mc_latency_mclk, k1;
+	fixed20_12 cur_latency_mclk, cur_latency_sclk;
+	fixed20_12 disp_latency, disp_latency_overhead, disp_drain_rate,
+		disp_drain_rate2, read_return_rate;
+	fixed20_12 time_disp1_drop_priority;
+	int c;
+	int cur_size = 16;       /* in octawords */
+	int critical_point = 0, critical_point2;
+/* 	uint32_t read_return_rate, time_disp1_drop_priority; */
+	int stop_req, max_stop_req;
+	struct drm_display_mode *mode1 = NULL;
+	struct drm_display_mode *mode2 = NULL;
+	uint32_t pixel_bytes1 = 0;
+	uint32_t pixel_bytes2 = 0;
+
+	if (rdev->mode_info.crtcs[0]->base.enabled) {
+		mode1 = &rdev->mode_info.crtcs[0]->base.mode;
+		pixel_bytes1 = rdev->mode_info.crtcs[0]->base.fb->bits_per_pixel / 8;
+	}
+	if (rdev->mode_info.crtcs[1]->base.enabled) {
+		mode2 = &rdev->mode_info.crtcs[1]->base.mode;
+		pixel_bytes2 = rdev->mode_info.crtcs[1]->base.fb->bits_per_pixel / 8;
+	}
+
+	min_mem_eff.full = rfixed_const_8(0);
+	/* get modes */
+	if ((rdev->disp_priority == 2) && ASIC_IS_R300(rdev)) {
+		uint32_t mc_init_misc_lat_timer = RREG32(R300_MC_INIT_MISC_LAT_TIMER);
+		mc_init_misc_lat_timer &= ~(R300_MC_DISP1R_INIT_LAT_MASK << R300_MC_DISP1R_INIT_LAT_SHIFT);
+		mc_init_misc_lat_timer &= ~(R300_MC_DISP0R_INIT_LAT_MASK << R300_MC_DISP0R_INIT_LAT_SHIFT);
+		/* check crtc enables */
+		if (mode2)
+			mc_init_misc_lat_timer |= (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
+		if (mode1)
+			mc_init_misc_lat_timer |= (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
+		WREG32(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer);
+	}
+
+	/*
+	 * determine is there is enough bw for current mode
+	 */
+	mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
+	temp_ff.full = rfixed_const(100);
+	mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
+	sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
+	sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
+
+	temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
+	temp_ff.full = rfixed_const(temp);
+	mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
+
+	pix_clk.full = 0;
+	pix_clk2.full = 0;
+	peak_disp_bw.full = 0;
+	if (mode1) {
+		temp_ff.full = rfixed_const(1000);
+		pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */
+		pix_clk.full = rfixed_div(pix_clk, temp_ff);
+		temp_ff.full = rfixed_const(pixel_bytes1);
+		peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
+	}
+	if (mode2) {
+		temp_ff.full = rfixed_const(1000);
+		pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */
+		pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
+		temp_ff.full = rfixed_const(pixel_bytes2);
+		peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
+	}
+
+	mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
+	if (peak_disp_bw.full >= mem_bw.full) {
+		DRM_ERROR("You may not have enough display bandwidth for current mode\n"
+			  "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
+	}
+
+	/*  Get values from the EXT_MEM_CNTL register...converting its contents. */
+	temp = RREG32(RADEON_MEM_TIMING_CNTL);
+	if ((rdev->family == CHIP_RV100) || (rdev->flags & RADEON_IS_IGP)) { /* RV100, M6, IGPs */
+		mem_trcd = ((temp >> 2) & 0x3) + 1;
+		mem_trp  = ((temp & 0x3)) + 1;
+		mem_tras = ((temp & 0x70) >> 4) + 1;
+	} else if (rdev->family == CHIP_R300 ||
+		   rdev->family == CHIP_R350) { /* r300, r350 */
+		mem_trcd = (temp & 0x7) + 1;
+		mem_trp = ((temp >> 8) & 0x7) + 1;
+		mem_tras = ((temp >> 11) & 0xf) + 4;
+	} else if (rdev->family == CHIP_RV350 ||
+		   rdev->family <= CHIP_RV380) {
+		/* rv3x0 */
+		mem_trcd = (temp & 0x7) + 3;
+		mem_trp = ((temp >> 8) & 0x7) + 3;
+		mem_tras = ((temp >> 11) & 0xf) + 6;
+	} else if (rdev->family == CHIP_R420 ||
+		   rdev->family == CHIP_R423 ||
+		   rdev->family == CHIP_RV410) {
+		/* r4xx */
+		mem_trcd = (temp & 0xf) + 3;
+		if (mem_trcd > 15)
+			mem_trcd = 15;
+		mem_trp = ((temp >> 8) & 0xf) + 3;
+		if (mem_trp > 15)
+			mem_trp = 15;
+		mem_tras = ((temp >> 12) & 0x1f) + 6;
+		if (mem_tras > 31)
+			mem_tras = 31;
+	} else { /* RV200, R200 */
+		mem_trcd = (temp & 0x7) + 1;
+		mem_trp = ((temp >> 8) & 0x7) + 1;
+		mem_tras = ((temp >> 12) & 0xf) + 4;
+	}
+	/* convert to FF */
+	trcd_ff.full = rfixed_const(mem_trcd);
+	trp_ff.full = rfixed_const(mem_trp);
+	tras_ff.full = rfixed_const(mem_tras);
+
+	/* Get values from the MEM_SDRAM_MODE_REG register...converting its */
+	temp = RREG32(RADEON_MEM_SDRAM_MODE_REG);
+	data = (temp & (7 << 20)) >> 20;
+	if ((rdev->family == CHIP_RV100) || rdev->flags & RADEON_IS_IGP) {
+		if (rdev->family == CHIP_RS480) /* don't think rs400 */
+			tcas_ff = memtcas_rs480_ff[data];
+		else
+			tcas_ff = memtcas_ff[data];
+	} else
+		tcas_ff = memtcas2_ff[data];
+
+	if (rdev->family == CHIP_RS400 ||
+	    rdev->family == CHIP_RS480) {
+		/* extra cas latency stored in bits 23-25 0-4 clocks */
+		data = (temp >> 23) & 0x7;
+		if (data < 5)
+			tcas_ff.full += rfixed_const(data);
+	}
+
+	if (ASIC_IS_R300(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
+		/* on the R300, Tcas is included in Trbs.
+		 */
+		temp = RREG32(RADEON_MEM_CNTL);
+		data = (R300_MEM_NUM_CHANNELS_MASK & temp);
+		if (data == 1) {
+			if (R300_MEM_USE_CD_CH_ONLY & temp) {
+				temp = RREG32(R300_MC_IND_INDEX);
+				temp &= ~R300_MC_IND_ADDR_MASK;
+				temp |= R300_MC_READ_CNTL_CD_mcind;
+				WREG32(R300_MC_IND_INDEX, temp);
+				temp = RREG32(R300_MC_IND_DATA);
+				data = (R300_MEM_RBS_POSITION_C_MASK & temp);
+			} else {
+				temp = RREG32(R300_MC_READ_CNTL_AB);
+				data = (R300_MEM_RBS_POSITION_A_MASK & temp);
+			}
+		} else {
+			temp = RREG32(R300_MC_READ_CNTL_AB);
+			data = (R300_MEM_RBS_POSITION_A_MASK & temp);
+		}
+		if (rdev->family == CHIP_RV410 ||
+		    rdev->family == CHIP_R420 ||
+		    rdev->family == CHIP_R423)
+			trbs_ff = memtrbs_r4xx[data];
+		else
+			trbs_ff = memtrbs[data];
+		tcas_ff.full += trbs_ff.full;
+	}
+
+	sclk_eff_ff.full = sclk_ff.full;
+
+	if (rdev->flags & RADEON_IS_AGP) {
+		fixed20_12 agpmode_ff;
+		agpmode_ff.full = rfixed_const(radeon_agpmode);
+		temp_ff.full = rfixed_const_666(16);
+		sclk_eff_ff.full -= rfixed_mul(agpmode_ff, temp_ff);
+	}
+	/* TODO PCIE lanes may affect this - agpmode == 16?? */
+
+	if (ASIC_IS_R300(rdev)) {
+		sclk_delay_ff.full = rfixed_const(250);
+	} else {
+		if ((rdev->family == CHIP_RV100) ||
+		    rdev->flags & RADEON_IS_IGP) {
+			if (rdev->mc.vram_is_ddr)
+				sclk_delay_ff.full = rfixed_const(41);
+			else
+				sclk_delay_ff.full = rfixed_const(33);
+		} else {
+			if (rdev->mc.vram_width == 128)
+				sclk_delay_ff.full = rfixed_const(57);
+			else
+				sclk_delay_ff.full = rfixed_const(41);
+		}
+	}
+
+	mc_latency_sclk.full = rfixed_div(sclk_delay_ff, sclk_eff_ff);
+
+	if (rdev->mc.vram_is_ddr) {
+		if (rdev->mc.vram_width == 32) {
+			k1.full = rfixed_const(40);
+			c  = 3;
+		} else {
+			k1.full = rfixed_const(20);
+			c  = 1;
+		}
+	} else {
+		k1.full = rfixed_const(40);
+		c  = 3;
+	}
+
+	temp_ff.full = rfixed_const(2);
+	mc_latency_mclk.full = rfixed_mul(trcd_ff, temp_ff);
+	temp_ff.full = rfixed_const(c);
+	mc_latency_mclk.full += rfixed_mul(tcas_ff, temp_ff);
+	temp_ff.full = rfixed_const(4);
+	mc_latency_mclk.full += rfixed_mul(tras_ff, temp_ff);
+	mc_latency_mclk.full += rfixed_mul(trp_ff, temp_ff);
+	mc_latency_mclk.full += k1.full;
+
+	mc_latency_mclk.full = rfixed_div(mc_latency_mclk, mclk_ff);
+	mc_latency_mclk.full += rfixed_div(temp_ff, sclk_eff_ff);
+
+	/*
+	  HW cursor time assuming worst case of full size colour cursor.
+	*/
+	temp_ff.full = rfixed_const((2 * (cur_size - (rdev->mc.vram_is_ddr + 1))));
+	temp_ff.full += trcd_ff.full;
+	if (temp_ff.full < tras_ff.full)
+		temp_ff.full = tras_ff.full;
+	cur_latency_mclk.full = rfixed_div(temp_ff, mclk_ff);
+
+	temp_ff.full = rfixed_const(cur_size);
+	cur_latency_sclk.full = rfixed_div(temp_ff, sclk_eff_ff);
+	/*
+	  Find the total latency for the display data.
+	*/
+	disp_latency_overhead.full = rfixed_const(80);
+	disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff);
+	mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full;
+	mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full;
+
+	if (mc_latency_mclk.full > mc_latency_sclk.full)
+		disp_latency.full = mc_latency_mclk.full;
+	else
+		disp_latency.full = mc_latency_sclk.full;
+
+	/* setup Max GRPH_STOP_REQ default value */
+	if (ASIC_IS_RV100(rdev))
+		max_stop_req = 0x5c;
+	else
+		max_stop_req = 0x7c;
+
+	if (mode1) {
+		/*  CRTC1
+		    Set GRPH_BUFFER_CNTL register using h/w defined optimal values.
+		    GRPH_STOP_REQ <= MIN[ 0x7C, (CRTC_H_DISP + 1) * (bit depth) / 0x10 ]
+		*/
+		stop_req = mode1->hdisplay * pixel_bytes1 / 16;
+
+		if (stop_req > max_stop_req)
+			stop_req = max_stop_req;
+
+		/*
+		  Find the drain rate of the display buffer.
+		*/
+		temp_ff.full = rfixed_const((16/pixel_bytes1));
+		disp_drain_rate.full = rfixed_div(pix_clk, temp_ff);
+
+		/*
+		  Find the critical point of the display buffer.
+		*/
+		crit_point_ff.full = rfixed_mul(disp_drain_rate, disp_latency);
+		crit_point_ff.full += rfixed_const_half(0);
+
+		critical_point = rfixed_trunc(crit_point_ff);
+
+		if (rdev->disp_priority == 2) {
+			critical_point = 0;
+		}
+
+		/*
+		  The critical point should never be above max_stop_req-4.  Setting
+		  GRPH_CRITICAL_CNTL = 0 will thus force high priority all the time.
+		*/
+		if (max_stop_req - critical_point < 4)
+			critical_point = 0;
+
+		if (critical_point == 0 && mode2 && rdev->family == CHIP_R300) {
+			/* some R300 cards have problem with this set to 0, when CRTC2 is enabled.*/
+			critical_point = 0x10;
+		}
+
+		temp = RREG32(RADEON_GRPH_BUFFER_CNTL);
+		temp &= ~(RADEON_GRPH_STOP_REQ_MASK);
+		temp |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
+		temp &= ~(RADEON_GRPH_START_REQ_MASK);
+		if ((rdev->family == CHIP_R350) &&
+		    (stop_req > 0x15)) {
+			stop_req -= 0x10;
+		}
+		temp |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
+		temp |= RADEON_GRPH_BUFFER_SIZE;
+		temp &= ~(RADEON_GRPH_CRITICAL_CNTL   |
+			  RADEON_GRPH_CRITICAL_AT_SOF |
+			  RADEON_GRPH_STOP_CNTL);
+		/*
+		  Write the result into the register.
+		*/
+		WREG32(RADEON_GRPH_BUFFER_CNTL, ((temp & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
+						       (critical_point << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
+
+#if 0
+		if ((rdev->family == CHIP_RS400) ||
+		    (rdev->family == CHIP_RS480)) {
+			/* attempt to program RS400 disp regs correctly ??? */
+			temp = RREG32(RS400_DISP1_REG_CNTL);
+			temp &= ~(RS400_DISP1_START_REQ_LEVEL_MASK |
+				  RS400_DISP1_STOP_REQ_LEVEL_MASK);
+			WREG32(RS400_DISP1_REQ_CNTL1, (temp |
+						       (critical_point << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
+						       (critical_point << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
+			temp = RREG32(RS400_DMIF_MEM_CNTL1);
+			temp &= ~(RS400_DISP1_CRITICAL_POINT_START_MASK |
+				  RS400_DISP1_CRITICAL_POINT_STOP_MASK);
+			WREG32(RS400_DMIF_MEM_CNTL1, (temp |
+						      (critical_point << RS400_DISP1_CRITICAL_POINT_START_SHIFT) |
+						      (critical_point << RS400_DISP1_CRITICAL_POINT_STOP_SHIFT)));
+		}
+#endif
+
+		DRM_DEBUG("GRPH_BUFFER_CNTL from to %x\n",
+			  /* 	  (unsigned int)info->SavedReg->grph_buffer_cntl, */
+			  (unsigned int)RREG32(RADEON_GRPH_BUFFER_CNTL));
+	}
+
+	if (mode2) {
+		u32 grph2_cntl;
+		stop_req = mode2->hdisplay * pixel_bytes2 / 16;
+
+		if (stop_req > max_stop_req)
+			stop_req = max_stop_req;
+
+		/*
+		  Find the drain rate of the display buffer.
+		*/
+		temp_ff.full = rfixed_const((16/pixel_bytes2));
+		disp_drain_rate2.full = rfixed_div(pix_clk2, temp_ff);
+
+		grph2_cntl = RREG32(RADEON_GRPH2_BUFFER_CNTL);
+		grph2_cntl &= ~(RADEON_GRPH_STOP_REQ_MASK);
+		grph2_cntl |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
+		grph2_cntl &= ~(RADEON_GRPH_START_REQ_MASK);
+		if ((rdev->family == CHIP_R350) &&
+		    (stop_req > 0x15)) {
+			stop_req -= 0x10;
+		}
+		grph2_cntl |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
+		grph2_cntl |= RADEON_GRPH_BUFFER_SIZE;
+		grph2_cntl &= ~(RADEON_GRPH_CRITICAL_CNTL   |
+			  RADEON_GRPH_CRITICAL_AT_SOF |
+			  RADEON_GRPH_STOP_CNTL);
+
+		if ((rdev->family == CHIP_RS100) ||
+		    (rdev->family == CHIP_RS200))
+			critical_point2 = 0;
+		else {
+			temp = (rdev->mc.vram_width * rdev->mc.vram_is_ddr + 1)/128;
+			temp_ff.full = rfixed_const(temp);
+			temp_ff.full = rfixed_mul(mclk_ff, temp_ff);
+			if (sclk_ff.full < temp_ff.full)
+				temp_ff.full = sclk_ff.full;
+
+			read_return_rate.full = temp_ff.full;
+
+			if (mode1) {
+				temp_ff.full = read_return_rate.full - disp_drain_rate.full;
+				time_disp1_drop_priority.full = rfixed_div(crit_point_ff, temp_ff);
+			} else {
+				time_disp1_drop_priority.full = 0;
+			}
+			crit_point_ff.full = disp_latency.full + time_disp1_drop_priority.full + disp_latency.full;
+			crit_point_ff.full = rfixed_mul(crit_point_ff, disp_drain_rate2);
+			crit_point_ff.full += rfixed_const_half(0);
+
+			critical_point2 = rfixed_trunc(crit_point_ff);
+
+			if (rdev->disp_priority == 2) {
+				critical_point2 = 0;
+			}
+
+			if (max_stop_req - critical_point2 < 4)
+				critical_point2 = 0;
+
+		}
+
+		if (critical_point2 == 0 && rdev->family == CHIP_R300) {
+			/* some R300 cards have problem with this set to 0 */
+			critical_point2 = 0x10;
+		}
+
+		WREG32(RADEON_GRPH2_BUFFER_CNTL, ((grph2_cntl & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
+						  (critical_point2 << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
+
+		if ((rdev->family == CHIP_RS400) ||
+		    (rdev->family == CHIP_RS480)) {
+#if 0
+			/* attempt to program RS400 disp2 regs correctly ??? */
+			temp = RREG32(RS400_DISP2_REQ_CNTL1);
+			temp &= ~(RS400_DISP2_START_REQ_LEVEL_MASK |
+				  RS400_DISP2_STOP_REQ_LEVEL_MASK);
+			WREG32(RS400_DISP2_REQ_CNTL1, (temp |
+						       (critical_point2 << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
+						       (critical_point2 << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
+			temp = RREG32(RS400_DISP2_REQ_CNTL2);
+			temp &= ~(RS400_DISP2_CRITICAL_POINT_START_MASK |
+				  RS400_DISP2_CRITICAL_POINT_STOP_MASK);
+			WREG32(RS400_DISP2_REQ_CNTL2, (temp |
+						       (critical_point2 << RS400_DISP2_CRITICAL_POINT_START_SHIFT) |
+						       (critical_point2 << RS400_DISP2_CRITICAL_POINT_STOP_SHIFT)));
+#endif
+			WREG32(RS400_DISP2_REQ_CNTL1, 0x105DC1CC);
+			WREG32(RS400_DISP2_REQ_CNTL2, 0x2749D000);
+			WREG32(RS400_DMIF_MEM_CNTL1,  0x29CA71DC);
+			WREG32(RS400_DISP1_REQ_CNTL1, 0x28FBC3AC);
+		}
+
+		DRM_DEBUG("GRPH2_BUFFER_CNTL from to %x\n",
+			  (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL));
+	}
+}
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index e2ed5bc0817..051bca6e3a4 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -30,6 +30,8 @@
 #include "drm.h"
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "radeon_drm.h"
+#include "radeon_share.h"
 
 /* r300,r350,rv350,rv370,rv380 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -44,6 +46,7 @@ int r100_gui_wait_for_idle(struct radeon_device *rdev);
 int r100_cs_packet_parse(struct radeon_cs_parser *p,
 			 struct radeon_cs_packet *pkt,
 			 unsigned idx);
+int r100_cs_packet_parse_vline(struct radeon_cs_parser *p);
 int r100_cs_packet_next_reloc(struct radeon_cs_parser *p,
 			      struct radeon_cs_reloc **cs_reloc);
 int r100_cs_parse_packet0(struct radeon_cs_parser *p,
@@ -80,8 +83,8 @@ void rv370_pcie_gart_tlb_flush(struct radeon_device *rdev)
 		WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp | RADEON_PCIE_TX_GART_INVALIDATE_TLB);
 		(void)RREG32_PCIE(RADEON_PCIE_TX_GART_CNTL);
 		WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp);
-		mb();
 	}
+	mb();
 }
 
 int rv370_pcie_gart_enable(struct radeon_device *rdev)
@@ -150,8 +153,13 @@ int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 	if (i < 0 || i > rdev->gart.num_gpu_pages) {
 		return -EINVAL;
 	}
-	addr = (((u32)addr) >> 8) | ((upper_32_bits(addr) & 0xff) << 4) | 0xC;
-	writel(cpu_to_le32(addr), ((void __iomem *)ptr) + (i * 4));
+	addr = (lower_32_bits(addr) >> 8) |
+	       ((upper_32_bits(addr) & 0xff) << 24) |
+	       0xc;
+	/* on x86 we want this to be CPU endian, on powerpc
+	 * on powerpc without HW swappers, it'll get swapped on way
+	 * into VRAM - so no need for cpu_to_le32 on VRAM tables */
+	writel(addr, ((void __iomem *)ptr) + (i * 4));
 	return 0;
 }
 
@@ -440,6 +448,7 @@ void r300_gpu_init(struct radeon_device *rdev)
 		/* rv350,rv370,rv380 */
 		rdev->num_gb_pipes = 1;
 	}
+	rdev->num_z_pipes = 1;
 	gb_tile_config = (R300_ENABLE_TILING | R300_TILE_SIZE_16);
 	switch (rdev->num_gb_pipes) {
 	case 2:
@@ -478,7 +487,8 @@ void r300_gpu_init(struct radeon_device *rdev)
 		printk(KERN_WARNING "Failed to wait MC idle while "
 		       "programming pipes. Bad things might happen.\n");
 	}
-	DRM_INFO("radeon: %d pipes initialized.\n", rdev->num_gb_pipes);
+	DRM_INFO("radeon: %d quad pipes, %d Z pipes initialized.\n",
+		 rdev->num_gb_pipes, rdev->num_z_pipes);
 }
 
 int r300_ga_reset(struct radeon_device *rdev)
@@ -579,35 +589,12 @@ void r300_vram_info(struct radeon_device *rdev)
 	} else {
 		rdev->mc.vram_width = 64;
 	}
-	rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
 
-	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	r100_vram_init_sizes(rdev);
 }
 
 
 /*
- * Indirect registers accessor
- */
-uint32_t rv370_pcie_rreg(struct radeon_device *rdev, uint32_t reg)
-{
-	uint32_t r;
-
-	WREG8(RADEON_PCIE_INDEX, ((reg) & 0xff));
-	(void)RREG32(RADEON_PCIE_INDEX);
-	r = RREG32(RADEON_PCIE_DATA);
-	return r;
-}
-
-void rv370_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
-{
-	WREG8(RADEON_PCIE_INDEX, ((reg) & 0xff));
-	(void)RREG32(RADEON_PCIE_INDEX);
-	WREG32(RADEON_PCIE_DATA, (v));
-	(void)RREG32(RADEON_PCIE_DATA);
-}
-
-/*
  * PCIE Lanes
  */
 
@@ -970,7 +957,7 @@ static inline void r300_cs_track_clear(struct r300_cs_track *track)
 
 static const unsigned r300_reg_safe_bm[159] = {
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
@@ -1008,7 +995,7 @@ static const unsigned r300_reg_safe_bm[159] = {
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0xFFFF0000, 0xFFFFFFFF, 0xFF80FFFF,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
-	0x0003FC01, 0xFFFFFFF8, 0xFE800B19,
+	0x0003FC01, 0xFFFFFCF8, 0xFF800B19,
 };
 
 static int r300_packet0_check(struct radeon_cs_parser *p,
@@ -1019,7 +1006,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 	struct radeon_cs_reloc *reloc;
 	struct r300_cs_track *track;
 	volatile uint32_t *ib;
-	uint32_t tmp;
+	uint32_t tmp, tile_flags = 0;
 	unsigned i;
 	int r;
 
@@ -1027,6 +1014,16 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	track = (struct r300_cs_track*)p->track;
 	switch(reg) {
+	case AVIVO_D1MODE_VLINE_START_END:
+	case RADEON_CRTC_GUI_TRIG_VLINE:
+		r = r100_cs_packet_parse_vline(p);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					idx, reg);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		break;
 	case RADEON_DST_PITCH_OFFSET:
 	case RADEON_SRC_PITCH_OFFSET:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1038,7 +1035,19 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		}
 		tmp = ib_chunk->kdata[idx] & 0x003fffff;
 		tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
-		ib[idx] = (ib_chunk->kdata[idx] & 0xffc00000) | tmp;
+
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+			tile_flags |= RADEON_DST_TILE_MACRO;
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+			if (reg == RADEON_SRC_PITCH_OFFSET) {
+				DRM_ERROR("Cannot src blit from microtiled surface\n");
+				r100_cs_dump_packet(p, pkt);
+				return -EINVAL;
+			}
+			tile_flags |= RADEON_DST_TILE_MICRO;
+		}
+		tmp |= tile_flags;
+		ib[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp;
 		break;
 	case R300_RB3D_COLOROFFSET0:
 	case R300_RB3D_COLOROFFSET1:
@@ -1127,6 +1136,23 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		/* RB3D_COLORPITCH1 */
 		/* RB3D_COLORPITCH2 */
 		/* RB3D_COLORPITCH3 */
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+				  idx, reg);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+			tile_flags |= R300_COLOR_TILE_ENABLE;
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+			tile_flags |= R300_COLOR_MICROTILE_ENABLE;
+
+		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp |= tile_flags;
+		ib[idx] = tmp;
+
 		i = (reg - 0x4E38) >> 2;
 		track->cb[i].pitch = ib_chunk->kdata[idx] & 0x3FFE;
 		switch (((ib_chunk->kdata[idx] >> 21) & 0xF)) {
@@ -1182,6 +1208,23 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		break;
 	case 0x4F24:
 		/* ZB_DEPTHPITCH */
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+				  idx, reg);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+			tile_flags |= R300_DEPTHMACROTILE_ENABLE;
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+			tile_flags |= R300_DEPTHMICROTILE_TILED;;
+
+		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp |= tile_flags;
+		ib[idx] = tmp;
+
 		track->zb.pitch = ib_chunk->kdata[idx] & 0x3FFC;
 		break;
 	case 0x4104:
@@ -1341,6 +1384,21 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		tmp = (ib_chunk->kdata[idx] >> 22) & 0xF;
 		track->textures[i].txdepth = tmp;
 		break;
+	case R300_ZB_ZPASS_ADDR:
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					idx, reg);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		break;
+	case 0x4be8:
+		/* valid register only on RV530 */
+		if (p->rdev->family == CHIP_RV530)
+			break;
+		/* fallthrough do not move */
 	default:
 		printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n",
 		       reg, idx);
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 70f48609515..4b7afef35a6 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -27,7 +27,9 @@
 #ifndef _R300_REG_H_
 #define _R300_REG_H_
 
-
+#define R300_SURF_TILE_MACRO (1<<16)
+#define R300_SURF_TILE_MICRO (2<<16)
+#define R300_SURF_TILE_BOTH (3<<16)
 
 
 #define R300_MC_INIT_MISC_LAT_TIMER	0x180
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index dea497a979f..97426a6f370 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -165,7 +165,18 @@ void r420_pipes_init(struct radeon_device *rdev)
 		printk(KERN_WARNING "Failed to wait GUI idle while "
 		       "programming pipes. Bad things might happen.\n");
 	}
-	DRM_INFO("radeon: %d pipes initialized.\n", rdev->num_gb_pipes);
+
+	if (rdev->family == CHIP_RV530) {
+		tmp = RREG32(RV530_GB_PIPE_SELECT2);
+		if ((tmp & 3) == 3)
+			rdev->num_z_pipes = 2;
+		else
+			rdev->num_z_pipes = 1;
+	} else
+		rdev->num_z_pipes = 1;
+
+	DRM_INFO("radeon: %d quad pipes, %d z pipes initialized.\n",
+		 rdev->num_gb_pipes, rdev->num_z_pipes);
 }
 
 void r420_gpu_init(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h
index 9070a1c2ce2..e1d5e0331e1 100644
--- a/drivers/gpu/drm/radeon/r500_reg.h
+++ b/drivers/gpu/drm/radeon/r500_reg.h
@@ -350,6 +350,7 @@
 #define AVIVO_D1CRTC_BLANK_CONTROL                              0x6084
 #define AVIVO_D1CRTC_INTERLACE_CONTROL                          0x6088
 #define AVIVO_D1CRTC_INTERLACE_STATUS                           0x608c
+#define AVIVO_D1CRTC_FRAME_COUNT                                0x60a4
 #define AVIVO_D1CRTC_STEREO_CONTROL                             0x60c4
 
 /* master controls */
@@ -438,13 +439,15 @@
 #       define AVIVO_DC_LB_DISP1_END_ADR_SHIFT  4
 #       define AVIVO_DC_LB_DISP1_END_ADR_MASK   0x7ff
 
-#define R500_DxMODE_INT_MASK 0x6540
-#define R500_D1MODE_INT_MASK (1<<0)
-#define R500_D2MODE_INT_MASK (1<<8)
-
 #define AVIVO_D1MODE_DATA_FORMAT                0x6528
 #       define AVIVO_D1MODE_INTERLEAVE_EN       (1 << 0)
 #define AVIVO_D1MODE_DESKTOP_HEIGHT             0x652C
+#define AVIVO_D1MODE_VBLANK_STATUS              0x6534
+#       define AVIVO_VBLANK_ACK                 (1 << 4)
+#define AVIVO_D1MODE_VLINE_START_END            0x6538
+#define AVIVO_DxMODE_INT_MASK                   0x6540
+#       define AVIVO_D1MODE_INT_MASK            (1 << 0)
+#       define AVIVO_D2MODE_INT_MASK            (1 << 8)
 #define AVIVO_D1MODE_VIEWPORT_START             0x6580
 #define AVIVO_D1MODE_VIEWPORT_SIZE              0x6584
 #define AVIVO_D1MODE_EXT_OVERSCAN_LEFT_RIGHT    0x6588
@@ -474,6 +477,7 @@
 #define AVIVO_D2CRTC_BLANK_CONTROL                              0x6884
 #define AVIVO_D2CRTC_INTERLACE_CONTROL                          0x6888
 #define AVIVO_D2CRTC_INTERLACE_STATUS                           0x688c
+#define AVIVO_D2CRTC_FRAME_COUNT                                0x68a4
 #define AVIVO_D2CRTC_STEREO_CONTROL                             0x68c4
 
 #define AVIVO_D2GRPH_ENABLE                                     0x6900
@@ -496,6 +500,8 @@
 #define AVIVO_D2CUR_SIZE                        0x6c10
 #define AVIVO_D2CUR_POSITION                    0x6c14
 
+#define AVIVO_D2MODE_VBLANK_STATUS              0x6d34
+#define AVIVO_D2MODE_VLINE_START_END            0x6d38
 #define AVIVO_D2MODE_VIEWPORT_START             0x6d80
 #define AVIVO_D2MODE_VIEWPORT_SIZE              0x6d84
 #define AVIVO_D2MODE_EXT_OVERSCAN_LEFT_RIGHT    0x6d88
@@ -746,4 +752,8 @@
 #	define AVIVO_I2C_EN							(1 << 0)
 #	define AVIVO_I2C_RESET						(1 << 8)
 
+#define AVIVO_DISP_INTERRUPT_STATUS                             0x7edc
+#       define AVIVO_D1_VBLANK_INTERRUPT                        (1 << 4)
+#       define AVIVO_D2_VBLANK_INTERRUPT                        (1 << 5)
+
 #endif
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index 570a244bd88..ebd6b0f7bdf 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -28,6 +28,7 @@
 #include "drmP.h"
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "radeon_share.h"
 
 /* r520,rv530,rv560,rv570,r580 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -94,8 +95,8 @@ int r520_mc_init(struct radeon_device *rdev)
 		       "programming pipes. Bad things might happen.\n");
 	}
 	/* Write VRAM size in case we are limiting it */
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	tmp = REG_SET(R520_MC_FB_TOP, tmp >> 16);
 	tmp |= REG_SET(R520_MC_FB_START, rdev->mc.vram_location >> 16);
 	WREG32_MC(R520_MC_FB_LOCATION, tmp);
@@ -176,7 +177,6 @@ void r520_gpu_init(struct radeon_device *rdev)
 	 */
 	/* workaround for RV530 */
 	if (rdev->family == CHIP_RV530) {
-		WREG32(0x4124, 1);
 		WREG32(0x4128, 0xFF);
 	}
 	r420_pipes_init(rdev);
@@ -226,9 +226,20 @@ static void r520_vram_get_type(struct radeon_device *rdev)
 
 void r520_vram_info(struct radeon_device *rdev)
 {
+	fixed20_12 a;
+
 	r520_vram_get_type(rdev);
-	rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
 
-	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	r100_vram_init_sizes(rdev);
+	/* FIXME: we should enforce default clock in case GPU is not in
+	 * default setup
+	 */
+	a.full = rfixed_const(100);
+	rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+	rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+}
+
+void r520_bandwidth_update(struct radeon_device *rdev)
+{
+	rv515_bandwidth_avivo_update(rdev);
 }
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index c45559fc97f..538cd907df6 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -67,7 +67,7 @@ int r600_mc_init(struct radeon_device *rdev)
 		       "programming pipes. Bad things might happen.\n");
 	}
 
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	tmp = REG_SET(R600_MC_FB_TOP, tmp >> 24);
 	tmp |= REG_SET(R600_MC_FB_BASE, rdev->mc.vram_location >> 24);
 	WREG32(R600_MC_VM_FB_LOCATION, tmp);
@@ -140,7 +140,8 @@ void r600_vram_get_type(struct radeon_device *rdev)
 void r600_vram_info(struct radeon_device *rdev)
 {
 	r600_vram_get_type(rdev);
-	rdev->mc.vram_size = RREG32(R600_CONFIG_MEMSIZE);
+	rdev->mc.real_vram_size = RREG32(R600_CONFIG_MEMSIZE);
+	rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
 
 	/* Could aper size report 0 ? */
 	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c
index 146f3570af8..20f17908b03 100644
--- a/drivers/gpu/drm/radeon/r600_cp.c
+++ b/drivers/gpu/drm/radeon/r600_cp.c
@@ -384,8 +384,9 @@ static void r600_cp_load_microcode(drm_radeon_private_t *dev_priv)
 		DRM_INFO("Loading RV670 PFP Microcode\n");
 		for (i = 0; i < PFP_UCODE_SIZE; i++)
 			RADEON_WRITE(R600_CP_PFP_UCODE_DATA, RV670_pfp_microcode[i]);
-	} else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780)) {
-		DRM_INFO("Loading RS780 CP Microcode\n");
+	} else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+		   ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880)) {
+		DRM_INFO("Loading RS780/RS880 CP Microcode\n");
 		for (i = 0; i < PM4_UCODE_SIZE; i++) {
 			RADEON_WRITE(R600_CP_ME_RAM_DATA,
 				     RS780_cp_microcode[i][0]);
@@ -396,7 +397,7 @@ static void r600_cp_load_microcode(drm_radeon_private_t *dev_priv)
 		}
 
 		RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0);
-		DRM_INFO("Loading RS780 PFP Microcode\n");
+		DRM_INFO("Loading RS780/RS880 PFP Microcode\n");
 		for (i = 0; i < PFP_UCODE_SIZE; i++)
 			RADEON_WRITE(R600_CP_PFP_UCODE_DATA, RS780_pfp_microcode[i]);
 	}
@@ -783,6 +784,7 @@ static void r600_gfx_init(struct drm_device *dev,
 		break;
 	case CHIP_RV610:
 	case CHIP_RS780:
+	case CHIP_RS880:
 	case CHIP_RV620:
 		dev_priv->r600_max_pipes = 1;
 		dev_priv->r600_max_tile_pipes = 1;
@@ -917,7 +919,8 @@ static void r600_gfx_init(struct drm_device *dev,
 	    ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV630) ||
 	    ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
 	    ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
-	    ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780))
+	    ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+	    ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880))
 		RADEON_WRITE(R600_DB_DEBUG, R600_PREZ_MUST_WAIT_FOR_POSTZ_DONE);
 	else
 		RADEON_WRITE(R600_DB_DEBUG, 0);
@@ -935,7 +938,8 @@ static void r600_gfx_init(struct drm_device *dev,
 	sq_ms_fifo_sizes = RADEON_READ(R600_SQ_MS_FIFO_SIZES);
 	if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
 	    ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
-	    ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780)) {
+	    ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+	    ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880)) {
 		sq_ms_fifo_sizes = (R600_CACHE_FIFO_SIZE(0xa) |
 				    R600_FETCH_FIFO_HIWATER(0xa) |
 				    R600_DONE_FIFO_HIWATER(0xe0) |
@@ -978,7 +982,8 @@ static void r600_gfx_init(struct drm_device *dev,
 					    R600_NUM_ES_STACK_ENTRIES(0));
 	} else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
 		   ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
-		   ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780)) {
+		   ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+		   ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880)) {
 		/* no vertex cache */
 		sq_config &= ~R600_VC_ENABLE;
 
@@ -1035,7 +1040,8 @@ static void r600_gfx_init(struct drm_device *dev,
 
 	if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
 	    ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
-	    ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780))
+	    ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+	    ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880))
 		RADEON_WRITE(R600_VGT_CACHE_INVALIDATION, R600_CACHE_INVALIDATION(R600_TC_ONLY));
 	else
 		RADEON_WRITE(R600_VGT_CACHE_INVALIDATION, R600_CACHE_INVALIDATION(R600_VC_AND_TC));
@@ -1078,6 +1084,7 @@ static void r600_gfx_init(struct drm_device *dev,
 		break;
 	case CHIP_RV610:
 	case CHIP_RS780:
+	case CHIP_RS880:
 	case CHIP_RV620:
 		gs_prim_buffer_depth = 32;
 		break;
@@ -1123,6 +1130,7 @@ static void r600_gfx_init(struct drm_device *dev,
 	switch (dev_priv->flags & RADEON_FAMILY_MASK) {
 	case CHIP_RV610:
 	case CHIP_RS780:
+	case CHIP_RS880:
 	case CHIP_RV620:
 		tc_cntl = R600_TC_L2_SIZE(8);
 		break;
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index d61f2fc61df..b519fb2fecb 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -64,6 +64,7 @@ extern int radeon_agpmode;
 extern int radeon_vram_limit;
 extern int radeon_gart_size;
 extern int radeon_benchmarking;
+extern int radeon_testing;
 extern int radeon_connector_table;
 
 /*
@@ -113,6 +114,7 @@ enum radeon_family {
 	CHIP_RV770,
 	CHIP_RV730,
 	CHIP_RV710,
+	CHIP_RS880,
 	CHIP_LAST,
 };
 
@@ -201,6 +203,14 @@ int radeon_fence_wait_last(struct radeon_device *rdev);
 struct radeon_fence *radeon_fence_ref(struct radeon_fence *fence);
 void radeon_fence_unref(struct radeon_fence **fence);
 
+/*
+ * Tiling registers
+ */
+struct radeon_surface_reg {
+	struct radeon_object *robj;
+};
+
+#define RADEON_GEM_MAX_SURFACES 8
 
 /*
  * Radeon buffer.
@@ -213,6 +223,7 @@ struct radeon_object_list {
 	uint64_t		gpu_offset;
 	unsigned		rdomain;
 	unsigned		wdomain;
+	uint32_t                tiling_flags;
 };
 
 int radeon_object_init(struct radeon_device *rdev);
@@ -231,6 +242,7 @@ int radeon_object_pin(struct radeon_object *robj, uint32_t domain,
 		      uint64_t *gpu_addr);
 void radeon_object_unpin(struct radeon_object *robj);
 int radeon_object_wait(struct radeon_object *robj);
+int radeon_object_busy_domain(struct radeon_object *robj, uint32_t *cur_placement);
 int radeon_object_evict_vram(struct radeon_device *rdev);
 int radeon_object_mmap(struct radeon_object *robj, uint64_t *offset);
 void radeon_object_force_delete(struct radeon_device *rdev);
@@ -242,8 +254,15 @@ void radeon_object_list_clean(struct list_head *head);
 int radeon_object_fbdev_mmap(struct radeon_object *robj,
 			     struct vm_area_struct *vma);
 unsigned long radeon_object_size(struct radeon_object *robj);
-
-
+void radeon_object_clear_surface_reg(struct radeon_object *robj);
+int radeon_object_check_tiling(struct radeon_object *robj, bool has_moved,
+			       bool force_drop);
+void radeon_object_set_tiling_flags(struct radeon_object *robj,
+				    uint32_t tiling_flags, uint32_t pitch);
+void radeon_object_get_tiling_flags(struct radeon_object *robj, uint32_t *tiling_flags, uint32_t *pitch);
+void radeon_bo_move_notify(struct ttm_buffer_object *bo,
+			   struct ttm_mem_reg *mem);
+void radeon_bo_fault_reserve_notify(struct ttm_buffer_object *bo);
 /*
  * GEM objects.
  */
@@ -315,8 +334,11 @@ struct radeon_mc {
 	unsigned		gtt_location;
 	unsigned		gtt_size;
 	unsigned		vram_location;
-	unsigned		vram_size;
+	/* for some chips with <= 32MB we need to lie
+	 * about vram size near mc fb location */
+	unsigned		mc_vram_size;
 	unsigned		vram_width;
+	unsigned		real_vram_size;
 	int			vram_mtrr;
 	bool			vram_is_ddr;
 };
@@ -474,6 +496,39 @@ struct radeon_wb {
 	uint64_t		gpu_addr;
 };
 
+/**
+ * struct radeon_pm - power management datas
+ * @max_bandwidth:      maximum bandwidth the gpu has (MByte/s)
+ * @igp_sideport_mclk:  sideport memory clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_system_mclk:    system clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_ht_link_clk:    ht link clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_ht_link_width:  ht link width in bits (rs690,rs740,rs780,rs880)
+ * @k8_bandwidth:       k8 bandwidth the gpu has (MByte/s) (IGP)
+ * @sideport_bandwidth: sideport bandwidth the gpu has (MByte/s) (IGP)
+ * @ht_bandwidth:       ht bandwidth the gpu has (MByte/s) (IGP)
+ * @core_bandwidth:     core GPU bandwidth the gpu has (MByte/s) (IGP)
+ * @sclk:          	GPU clock Mhz (core bandwith depends of this clock)
+ * @needed_bandwidth:   current bandwidth needs
+ *
+ * It keeps track of various data needed to take powermanagement decision.
+ * Bandwith need is used to determine minimun clock of the GPU and memory.
+ * Equation between gpu/memory clock and available bandwidth is hw dependent
+ * (type of memory, bus size, efficiency, ...)
+ */
+struct radeon_pm {
+	fixed20_12		max_bandwidth;
+	fixed20_12		igp_sideport_mclk;
+	fixed20_12		igp_system_mclk;
+	fixed20_12		igp_ht_link_clk;
+	fixed20_12		igp_ht_link_width;
+	fixed20_12		k8_bandwidth;
+	fixed20_12		sideport_bandwidth;
+	fixed20_12		ht_bandwidth;
+	fixed20_12		core_bandwidth;
+	fixed20_12		sclk;
+	fixed20_12		needed_bandwidth;
+};
+
 
 /*
  * Benchmarking
@@ -482,6 +537,12 @@ void radeon_benchmark(struct radeon_device *rdev);
 
 
 /*
+ * Testing
+ */
+void radeon_test_moves(struct radeon_device *rdev);
+
+
+/*
  * Debugfs
  */
 int radeon_debugfs_add_files(struct radeon_device *rdev,
@@ -514,6 +575,7 @@ struct radeon_asic {
 	void (*ring_start)(struct radeon_device *rdev);
 	int (*irq_set)(struct radeon_device *rdev);
 	int (*irq_process)(struct radeon_device *rdev);
+	u32 (*get_vblank_counter)(struct radeon_device *rdev, int crtc);
 	void (*fence_ring_emit)(struct radeon_device *rdev, struct radeon_fence *fence);
 	int (*cs_parse)(struct radeon_cs_parser *p);
 	int (*copy_blit)(struct radeon_device *rdev,
@@ -535,6 +597,11 @@ struct radeon_asic {
 	void (*set_memory_clock)(struct radeon_device *rdev, uint32_t mem_clock);
 	void (*set_pcie_lanes)(struct radeon_device *rdev, int lanes);
 	void (*set_clock_gating)(struct radeon_device *rdev, int enable);
+	int (*set_surface_reg)(struct radeon_device *rdev, int reg,
+			       uint32_t tiling_flags, uint32_t pitch,
+			       uint32_t offset, uint32_t obj_size);
+	int (*clear_surface_reg)(struct radeon_device *rdev, int reg);
+	void (*bandwidth_update)(struct radeon_device *rdev);
 };
 
 union radeon_asic_config {
@@ -566,6 +633,10 @@ int radeon_gem_busy_ioctl(struct drm_device *dev, void *data,
 int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
 			      struct drm_file *filp);
 int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp);
+int radeon_gem_set_tiling_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *filp);
+int radeon_gem_get_tiling_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *filp);
 
 
 /*
@@ -584,6 +655,7 @@ struct radeon_device {
 	int				usec_timeout;
 	enum radeon_pll_errata		pll_errata;
 	int				num_gb_pipes;
+	int				num_z_pipes;
 	int				disp_priority;
 	/* BIOS */
 	uint8_t				*bios;
@@ -594,17 +666,14 @@ struct radeon_device {
 	struct radeon_object		*fbdev_robj;
 	struct radeon_framebuffer	*fbdev_rfb;
 	/* Register mmio */
-	unsigned long			rmmio_base;
-	unsigned long			rmmio_size;
+	resource_size_t			rmmio_base;
+	resource_size_t			rmmio_size;
 	void				*rmmio;
-	radeon_rreg_t			mm_rreg;
-	radeon_wreg_t			mm_wreg;
 	radeon_rreg_t			mc_rreg;
 	radeon_wreg_t			mc_wreg;
 	radeon_rreg_t			pll_rreg;
 	radeon_wreg_t			pll_wreg;
-	radeon_rreg_t			pcie_rreg;
-	radeon_wreg_t			pcie_wreg;
+	uint32_t                        pcie_reg_mask;
 	radeon_rreg_t			pciep_rreg;
 	radeon_wreg_t			pciep_wreg;
 	struct radeon_clock             clock;
@@ -619,11 +688,14 @@ struct radeon_device {
 	struct radeon_irq		irq;
 	struct radeon_asic		*asic;
 	struct radeon_gem		gem;
+	struct radeon_pm		pm;
 	struct mutex			cs_mutex;
 	struct radeon_wb		wb;
 	bool				gpu_lockup;
 	bool				shutdown;
 	bool				suspend;
+	bool				need_dma32;
+	struct radeon_surface_reg surface_regs[RADEON_GEM_MAX_SURFACES];
 };
 
 int radeon_device_init(struct radeon_device *rdev,
@@ -633,22 +705,42 @@ int radeon_device_init(struct radeon_device *rdev,
 void radeon_device_fini(struct radeon_device *rdev);
 int radeon_gpu_wait_for_idle(struct radeon_device *rdev);
 
+static inline uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+	if (reg < 0x10000)
+		return readl(((void __iomem *)rdev->rmmio) + reg);
+	else {
+		writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
+		return readl(((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
+	}
+}
+
+static inline void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+	if (reg < 0x10000)
+		writel(v, ((void __iomem *)rdev->rmmio) + reg);
+	else {
+		writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
+		writel(v, ((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
+	}
+}
+
 
 /*
  * Registers read & write functions.
  */
 #define RREG8(reg) readb(((void __iomem *)rdev->rmmio) + (reg))
 #define WREG8(reg, v) writeb(v, ((void __iomem *)rdev->rmmio) + (reg))
-#define RREG32(reg) rdev->mm_rreg(rdev, (reg))
-#define WREG32(reg, v) rdev->mm_wreg(rdev, (reg), (v))
+#define RREG32(reg) r100_mm_rreg(rdev, (reg))
+#define WREG32(reg, v) r100_mm_wreg(rdev, (reg), (v))
 #define REG_SET(FIELD, v) (((v) << FIELD##_SHIFT) & FIELD##_MASK)
 #define REG_GET(FIELD, v) (((v) << FIELD##_SHIFT) & FIELD##_MASK)
 #define RREG32_PLL(reg) rdev->pll_rreg(rdev, (reg))
 #define WREG32_PLL(reg, v) rdev->pll_wreg(rdev, (reg), (v))
 #define RREG32_MC(reg) rdev->mc_rreg(rdev, (reg))
 #define WREG32_MC(reg, v) rdev->mc_wreg(rdev, (reg), (v))
-#define RREG32_PCIE(reg) rdev->pcie_rreg(rdev, (reg))
-#define WREG32_PCIE(reg, v) rdev->pcie_wreg(rdev, (reg), (v))
+#define RREG32_PCIE(reg) rv370_pcie_rreg(rdev, (reg))
+#define WREG32_PCIE(reg, v) rv370_pcie_wreg(rdev, (reg), (v))
 #define WREG32_P(reg, val, mask)				\
 	do {							\
 		uint32_t tmp_ = RREG32(reg);			\
@@ -664,12 +756,32 @@ int radeon_gpu_wait_for_idle(struct radeon_device *rdev);
 		WREG32_PLL(reg, tmp_);				\
 	} while (0)
 
+/*
+ * Indirect registers accessor
+ */
+static inline uint32_t rv370_pcie_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+	uint32_t r;
+
+	WREG32(RADEON_PCIE_INDEX, ((reg) & rdev->pcie_reg_mask));
+	r = RREG32(RADEON_PCIE_DATA);
+	return r;
+}
+
+static inline void rv370_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+	WREG32(RADEON_PCIE_INDEX, ((reg) & rdev->pcie_reg_mask));
+	WREG32(RADEON_PCIE_DATA, (v));
+}
+
 void r100_pll_errata_after_index(struct radeon_device *rdev);
 
 
 /*
  * ASICs helpers.
  */
+#define ASIC_IS_RN50(rdev) ((rdev->pdev->device == 0x515e) || \
+			    (rdev->pdev->device == 0x5969))
 #define ASIC_IS_RV100(rdev) ((rdev->family == CHIP_RV100) || \
 		(rdev->family == CHIP_RV200) || \
 		(rdev->family == CHIP_RS100) || \
@@ -788,6 +900,7 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v)
 #define radeon_ring_start(rdev) (rdev)->asic->ring_start((rdev))
 #define radeon_irq_set(rdev) (rdev)->asic->irq_set((rdev))
 #define radeon_irq_process(rdev) (rdev)->asic->irq_process((rdev))
+#define radeon_get_vblank_counter(rdev, crtc) (rdev)->asic->get_vblank_counter((rdev), (crtc))
 #define radeon_fence_ring_emit(rdev, fence) (rdev)->asic->fence_ring_emit((rdev), (fence))
 #define radeon_copy_blit(rdev, s, d, np, f) (rdev)->asic->copy_blit((rdev), (s), (d), (np), (f))
 #define radeon_copy_dma(rdev, s, d, np, f) (rdev)->asic->copy_dma((rdev), (s), (d), (np), (f))
@@ -796,5 +909,8 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v)
 #define radeon_set_memory_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e))
 #define radeon_set_pcie_lanes(rdev, l) (rdev)->asic->set_pcie_lanes((rdev), (l))
 #define radeon_set_clock_gating(rdev, e) (rdev)->asic->set_clock_gating((rdev), (e))
+#define radeon_set_surface_reg(rdev, r, f, p, o, s) ((rdev)->asic->set_surface_reg((rdev), (r), (f), (p), (o), (s)))
+#define radeon_clear_surface_reg(rdev, r) ((rdev)->asic->clear_surface_reg((rdev), (r)))
+#define radeon_bandwidth_update(rdev) (rdev)->asic->bandwidth_update((rdev))
 
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index e2e567395df..93d8f888930 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -49,6 +49,7 @@ void r100_vram_info(struct radeon_device *rdev);
 int r100_gpu_reset(struct radeon_device *rdev);
 int r100_mc_init(struct radeon_device *rdev);
 void r100_mc_fini(struct radeon_device *rdev);
+u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc);
 int r100_wb_init(struct radeon_device *rdev);
 void r100_wb_fini(struct radeon_device *rdev);
 int r100_gart_enable(struct radeon_device *rdev);
@@ -71,6 +72,11 @@ int r100_copy_blit(struct radeon_device *rdev,
 		   uint64_t dst_offset,
 		   unsigned num_pages,
 		   struct radeon_fence *fence);
+int r100_set_surface_reg(struct radeon_device *rdev, int reg,
+			 uint32_t tiling_flags, uint32_t pitch,
+			 uint32_t offset, uint32_t obj_size);
+int r100_clear_surface_reg(struct radeon_device *rdev, int reg);
+void r100_bandwidth_update(struct radeon_device *rdev);
 
 static struct radeon_asic r100_asic = {
 	.init = &r100_init,
@@ -91,6 +97,7 @@ static struct radeon_asic r100_asic = {
 	.ring_start = &r100_ring_start,
 	.irq_set = &r100_irq_set,
 	.irq_process = &r100_irq_process,
+	.get_vblank_counter = &r100_get_vblank_counter,
 	.fence_ring_emit = &r100_fence_ring_emit,
 	.cs_parse = &r100_cs_parse,
 	.copy_blit = &r100_copy_blit,
@@ -100,6 +107,9 @@ static struct radeon_asic r100_asic = {
 	.set_memory_clock = NULL,
 	.set_pcie_lanes = NULL,
 	.set_clock_gating = &radeon_legacy_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &r100_bandwidth_update,
 };
 
 
@@ -128,6 +138,7 @@ int r300_copy_dma(struct radeon_device *rdev,
 		  uint64_t dst_offset,
 		  unsigned num_pages,
 		  struct radeon_fence *fence);
+
 static struct radeon_asic r300_asic = {
 	.init = &r300_init,
 	.errata = &r300_errata,
@@ -147,6 +158,7 @@ static struct radeon_asic r300_asic = {
 	.ring_start = &r300_ring_start,
 	.irq_set = &r100_irq_set,
 	.irq_process = &r100_irq_process,
+	.get_vblank_counter = &r100_get_vblank_counter,
 	.fence_ring_emit = &r300_fence_ring_emit,
 	.cs_parse = &r300_cs_parse,
 	.copy_blit = &r100_copy_blit,
@@ -156,6 +168,9 @@ static struct radeon_asic r300_asic = {
 	.set_memory_clock = NULL,
 	.set_pcie_lanes = &rv370_set_pcie_lanes,
 	.set_clock_gating = &radeon_legacy_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &r100_bandwidth_update,
 };
 
 /*
@@ -184,6 +199,7 @@ static struct radeon_asic r420_asic = {
 	.ring_start = &r300_ring_start,
 	.irq_set = &r100_irq_set,
 	.irq_process = &r100_irq_process,
+	.get_vblank_counter = &r100_get_vblank_counter,
 	.fence_ring_emit = &r300_fence_ring_emit,
 	.cs_parse = &r300_cs_parse,
 	.copy_blit = &r100_copy_blit,
@@ -193,6 +209,9 @@ static struct radeon_asic r420_asic = {
 	.set_memory_clock = &radeon_atom_set_memory_clock,
 	.set_pcie_lanes = &rv370_set_pcie_lanes,
 	.set_clock_gating = &radeon_atom_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &r100_bandwidth_update,
 };
 
 
@@ -228,6 +247,7 @@ static struct radeon_asic rs400_asic = {
 	.ring_start = &r300_ring_start,
 	.irq_set = &r100_irq_set,
 	.irq_process = &r100_irq_process,
+	.get_vblank_counter = &r100_get_vblank_counter,
 	.fence_ring_emit = &r300_fence_ring_emit,
 	.cs_parse = &r300_cs_parse,
 	.copy_blit = &r100_copy_blit,
@@ -237,25 +257,32 @@ static struct radeon_asic rs400_asic = {
 	.set_memory_clock = NULL,
 	.set_pcie_lanes = NULL,
 	.set_clock_gating = &radeon_legacy_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &r100_bandwidth_update,
 };
 
 
 /*
  * rs600.
  */
+int rs600_init(struct radeon_device *dev);
 void rs600_errata(struct radeon_device *rdev);
 void rs600_vram_info(struct radeon_device *rdev);
 int rs600_mc_init(struct radeon_device *rdev);
 void rs600_mc_fini(struct radeon_device *rdev);
 int rs600_irq_set(struct radeon_device *rdev);
+int rs600_irq_process(struct radeon_device *rdev);
+u32 rs600_get_vblank_counter(struct radeon_device *rdev, int crtc);
 int rs600_gart_enable(struct radeon_device *rdev);
 void rs600_gart_disable(struct radeon_device *rdev);
 void rs600_gart_tlb_flush(struct radeon_device *rdev);
 int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
 uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg);
 void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rs600_bandwidth_update(struct radeon_device *rdev);
 static struct radeon_asic rs600_asic = {
-	.init = &r300_init,
+	.init = &rs600_init,
 	.errata = &rs600_errata,
 	.vram_info = &rs600_vram_info,
 	.gpu_reset = &r300_gpu_reset,
@@ -272,7 +299,8 @@ static struct radeon_asic rs600_asic = {
 	.cp_disable = &r100_cp_disable,
 	.ring_start = &r300_ring_start,
 	.irq_set = &rs600_irq_set,
-	.irq_process = &r100_irq_process,
+	.irq_process = &rs600_irq_process,
+	.get_vblank_counter = &rs600_get_vblank_counter,
 	.fence_ring_emit = &r300_fence_ring_emit,
 	.cs_parse = &r300_cs_parse,
 	.copy_blit = &r100_copy_blit,
@@ -282,6 +310,7 @@ static struct radeon_asic rs600_asic = {
 	.set_memory_clock = &radeon_atom_set_memory_clock,
 	.set_pcie_lanes = NULL,
 	.set_clock_gating = &radeon_atom_set_clock_gating,
+	.bandwidth_update = &rs600_bandwidth_update,
 };
 
 
@@ -294,8 +323,9 @@ int rs690_mc_init(struct radeon_device *rdev);
 void rs690_mc_fini(struct radeon_device *rdev);
 uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg);
 void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rs690_bandwidth_update(struct radeon_device *rdev);
 static struct radeon_asic rs690_asic = {
-	.init = &r300_init,
+	.init = &rs600_init,
 	.errata = &rs690_errata,
 	.vram_info = &rs690_vram_info,
 	.gpu_reset = &r300_gpu_reset,
@@ -312,7 +342,8 @@ static struct radeon_asic rs690_asic = {
 	.cp_disable = &r100_cp_disable,
 	.ring_start = &r300_ring_start,
 	.irq_set = &rs600_irq_set,
-	.irq_process = &r100_irq_process,
+	.irq_process = &rs600_irq_process,
+	.get_vblank_counter = &rs600_get_vblank_counter,
 	.fence_ring_emit = &r300_fence_ring_emit,
 	.cs_parse = &r300_cs_parse,
 	.copy_blit = &r100_copy_blit,
@@ -322,6 +353,9 @@ static struct radeon_asic rs690_asic = {
 	.set_memory_clock = &radeon_atom_set_memory_clock,
 	.set_pcie_lanes = NULL,
 	.set_clock_gating = &radeon_atom_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &rs690_bandwidth_update,
 };
 
 
@@ -339,6 +373,7 @@ void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 void rv515_ring_start(struct radeon_device *rdev);
 uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
 void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rv515_bandwidth_update(struct radeon_device *rdev);
 static struct radeon_asic rv515_asic = {
 	.init = &rv515_init,
 	.errata = &rv515_errata,
@@ -356,8 +391,9 @@ static struct radeon_asic rv515_asic = {
 	.cp_fini = &r100_cp_fini,
 	.cp_disable = &r100_cp_disable,
 	.ring_start = &rv515_ring_start,
-	.irq_set = &r100_irq_set,
-	.irq_process = &r100_irq_process,
+	.irq_set = &rs600_irq_set,
+	.irq_process = &rs600_irq_process,
+	.get_vblank_counter = &rs600_get_vblank_counter,
 	.fence_ring_emit = &r300_fence_ring_emit,
 	.cs_parse = &r300_cs_parse,
 	.copy_blit = &r100_copy_blit,
@@ -367,6 +403,9 @@ static struct radeon_asic rv515_asic = {
 	.set_memory_clock = &radeon_atom_set_memory_clock,
 	.set_pcie_lanes = &rv370_set_pcie_lanes,
 	.set_clock_gating = &radeon_atom_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &rv515_bandwidth_update,
 };
 
 
@@ -377,6 +416,7 @@ void r520_errata(struct radeon_device *rdev);
 void r520_vram_info(struct radeon_device *rdev);
 int r520_mc_init(struct radeon_device *rdev);
 void r520_mc_fini(struct radeon_device *rdev);
+void r520_bandwidth_update(struct radeon_device *rdev);
 static struct radeon_asic r520_asic = {
 	.init = &rv515_init,
 	.errata = &r520_errata,
@@ -394,8 +434,9 @@ static struct radeon_asic r520_asic = {
 	.cp_fini = &r100_cp_fini,
 	.cp_disable = &r100_cp_disable,
 	.ring_start = &rv515_ring_start,
-	.irq_set = &r100_irq_set,
-	.irq_process = &r100_irq_process,
+	.irq_set = &rs600_irq_set,
+	.irq_process = &rs600_irq_process,
+	.get_vblank_counter = &rs600_get_vblank_counter,
 	.fence_ring_emit = &r300_fence_ring_emit,
 	.cs_parse = &r300_cs_parse,
 	.copy_blit = &r100_copy_blit,
@@ -405,6 +446,9 @@ static struct radeon_asic r520_asic = {
 	.set_memory_clock = &radeon_atom_set_memory_clock,
 	.set_pcie_lanes = &rv370_set_pcie_lanes,
 	.set_clock_gating = &radeon_atom_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &r520_bandwidth_update,
 };
 
 /*
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 1f5a1a49098..fcfe5c02d74 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -103,7 +103,8 @@ static inline struct radeon_i2c_bus_rec radeon_lookup_gpio(struct drm_device
 static bool radeon_atom_apply_quirks(struct drm_device *dev,
 				     uint32_t supported_device,
 				     int *connector_type,
-				     struct radeon_i2c_bus_rec *i2c_bus)
+				     struct radeon_i2c_bus_rec *i2c_bus,
+				     uint8_t *line_mux)
 {
 
 	/* Asus M2A-VM HDMI board lists the DVI port as HDMI */
@@ -127,8 +128,10 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
 	if ((dev->pdev->device == 0x5653) &&
 	    (dev->pdev->subsystem_vendor == 0x1462) &&
 	    (dev->pdev->subsystem_device == 0x0291)) {
-		if (*connector_type == DRM_MODE_CONNECTOR_LVDS)
+		if (*connector_type == DRM_MODE_CONNECTOR_LVDS) {
 			i2c_bus->valid = false;
+			*line_mux = 53;
+		}
 	}
 
 	/* Funky macbooks */
@@ -526,7 +529,7 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct
 
 		if (!radeon_atom_apply_quirks
 		    (dev, (1 << i), &bios_connectors[i].connector_type,
-		     &bios_connectors[i].ddc_bus))
+		     &bios_connectors[i].ddc_bus, &bios_connectors[i].line_mux))
 			continue;
 
 		bios_connectors[i].valid = true;
diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c
index c44403a2ca7..2e938f7496f 100644
--- a/drivers/gpu/drm/radeon/radeon_benchmark.c
+++ b/drivers/gpu/drm/radeon/radeon_benchmark.c
@@ -63,7 +63,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize,
 		if (r) {
 			goto out_cleanup;
 		}
-		r = radeon_copy_dma(rdev, saddr, daddr, size >> 14, fence);
+		r = radeon_copy_dma(rdev, saddr, daddr, size / 4096, fence);
 		if (r) {
 			goto out_cleanup;
 		}
@@ -88,7 +88,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize,
 		if (r) {
 			goto out_cleanup;
 		}
-		r = radeon_copy_blit(rdev, saddr, daddr, size >> 14, fence);
+		r = radeon_copy_blit(rdev, saddr, daddr, size / 4096, fence);
 		if (r) {
 			goto out_cleanup;
 		}
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index afc4db280b9..2a027e00762 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -685,23 +685,15 @@ static const uint32_t default_tvdac_adj[CHIP_LAST] = {
 	0x00780000,		/* rs480 */
 };
 
-static struct radeon_encoder_tv_dac
-    *radeon_legacy_get_tv_dac_info_from_table(struct radeon_device *rdev)
+static void radeon_legacy_get_tv_dac_info_from_table(struct radeon_device *rdev,
+						     struct radeon_encoder_tv_dac *tv_dac)
 {
-	struct radeon_encoder_tv_dac *tv_dac = NULL;
-
-	tv_dac = kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL);
-
-	if (!tv_dac)
-		return NULL;
-
 	tv_dac->ps2_tvdac_adj = default_tvdac_adj[rdev->family];
 	if ((rdev->flags & RADEON_IS_MOBILITY) && (rdev->family == CHIP_RV250))
 		tv_dac->ps2_tvdac_adj = 0x00880000;
 	tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
 	tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
-
-	return tv_dac;
+	return;
 }
 
 struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct
@@ -713,19 +705,18 @@ struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct
 	uint16_t dac_info;
 	uint8_t rev, bg, dac;
 	struct radeon_encoder_tv_dac *tv_dac = NULL;
+	int found = 0;
+
+	tv_dac = kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL);
+	if (!tv_dac)
+		return NULL;
 
 	if (rdev->bios == NULL)
-		return radeon_legacy_get_tv_dac_info_from_table(rdev);
+		goto out;
 
 	/* first check TV table */
 	dac_info = combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE);
 	if (dac_info) {
-		tv_dac =
-		    kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL);
-
-		if (!tv_dac)
-			return NULL;
-
 		rev = RBIOS8(dac_info + 0x3);
 		if (rev > 4) {
 			bg = RBIOS8(dac_info + 0xc) & 0xf;
@@ -739,6 +730,7 @@ struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct
 			bg = RBIOS8(dac_info + 0x10) & 0xf;
 			dac = RBIOS8(dac_info + 0x11) & 0xf;
 			tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20);
+			found = 1;
 		} else if (rev > 1) {
 			bg = RBIOS8(dac_info + 0xc) & 0xf;
 			dac = (RBIOS8(dac_info + 0xc) >> 4) & 0xf;
@@ -751,22 +743,15 @@ struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct
 			bg = RBIOS8(dac_info + 0xe) & 0xf;
 			dac = (RBIOS8(dac_info + 0xe) >> 4) & 0xf;
 			tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20);
+			found = 1;
 		}
-
 		tv_dac->tv_std = radeon_combios_get_tv_info(encoder);
-
-	} else {
+	}
+	if (!found) {
 		/* then check CRT table */
 		dac_info =
 		    combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE);
 		if (dac_info) {
-			tv_dac =
-			    kzalloc(sizeof(struct radeon_encoder_tv_dac),
-				    GFP_KERNEL);
-
-			if (!tv_dac)
-				return NULL;
-
 			rev = RBIOS8(dac_info) & 0x3;
 			if (rev < 2) {
 				bg = RBIOS8(dac_info + 0x3) & 0xf;
@@ -775,6 +760,7 @@ struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct
 				    (bg << 16) | (dac << 20);
 				tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
 				tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
+				found = 1;
 			} else {
 				bg = RBIOS8(dac_info + 0x4) & 0xf;
 				dac = RBIOS8(dac_info + 0x5) & 0xf;
@@ -782,13 +768,17 @@ struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct
 				    (bg << 16) | (dac << 20);
 				tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
 				tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
+				found = 1;
 			}
 		} else {
 			DRM_INFO("No TV DAC info found in BIOS\n");
-			return radeon_legacy_get_tv_dac_info_from_table(rdev);
 		}
 	}
 
+out:
+	if (!found) /* fallback to defaults */
+		radeon_legacy_get_tv_dac_info_from_table(rdev, tv_dac);
+
 	return tv_dac;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index d8356827ef1..7a52c461145 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -406,6 +406,15 @@ static void radeon_init_pipes(drm_radeon_private_t *dev_priv)
 {
 	uint32_t gb_tile_config, gb_pipe_sel = 0;
 
+	if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV530) {
+		uint32_t z_pipe_sel = RADEON_READ(RV530_GB_PIPE_SELECT2);
+		if ((z_pipe_sel & 3) == 3)
+			dev_priv->num_z_pipes = 2;
+		else
+			dev_priv->num_z_pipes = 1;
+	} else
+		dev_priv->num_z_pipes = 1;
+
 	/* RS4xx/RS6xx/R4xx/R5xx */
 	if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R420) {
 		gb_pipe_sel = RADEON_READ(R400_GB_PIPE_SELECT);
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index b843f9bdfb1..a169067efc4 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -127,17 +127,23 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data)
 				       sizeof(struct drm_radeon_cs_chunk))) {
 			return -EFAULT;
 		}
+		p->chunks[i].length_dw = user_chunk.length_dw;
+		p->chunks[i].kdata = NULL;
 		p->chunks[i].chunk_id = user_chunk.chunk_id;
+
 		if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_RELOCS) {
 			p->chunk_relocs_idx = i;
 		}
 		if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_IB) {
 			p->chunk_ib_idx = i;
+			/* zero length IB isn't useful */
+			if (p->chunks[i].length_dw == 0)
+				return -EINVAL;
 		}
+
 		p->chunks[i].length_dw = user_chunk.length_dw;
 		cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data;
 
-		p->chunks[i].kdata = NULL;
 		size = p->chunks[i].length_dw * sizeof(uint32_t);
 		p->chunks[i].kdata = kzalloc(size, GFP_KERNEL);
 		if (p->chunks[i].kdata == NULL) {
diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c
index 5232441f119..b13c79e38bc 100644
--- a/drivers/gpu/drm/radeon/radeon_cursor.c
+++ b/drivers/gpu/drm/radeon/radeon_cursor.c
@@ -111,9 +111,11 @@ static void radeon_set_cursor(struct drm_crtc *crtc, struct drm_gem_object *obj,
 
 	if (ASIC_IS_AVIVO(rdev))
 		WREG32(AVIVO_D1CUR_SURFACE_ADDRESS + radeon_crtc->crtc_offset, gpu_addr);
-	else
+	else {
+		radeon_crtc->legacy_cursor_offset = gpu_addr - radeon_crtc->legacy_display_base_addr;
 		/* offset is from DISP(2)_BASE_ADDRESS */
-		WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, gpu_addr);
+		WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, radeon_crtc->legacy_cursor_offset);
+	}
 }
 
 int radeon_crtc_cursor_set(struct drm_crtc *crtc,
@@ -245,6 +247,9 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc,
 		       (RADEON_CUR_LOCK
 			| ((xorigin ? 0 : x) << 16)
 			| (yorigin ? 0 : y)));
+		/* offset is from DISP(2)_BASE_ADDRESS */
+		WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, (radeon_crtc->legacy_cursor_offset +
+								      (yorigin * 256)));
 	}
 	radeon_lock_cursor(crtc, false);
 
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index f30aa7274a5..7693f7c67bd 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -35,6 +35,25 @@
 #include "atom.h"
 
 /*
+ * Clear GPU surface registers.
+ */
+static void radeon_surface_init(struct radeon_device *rdev)
+{
+	/* FIXME: check this out */
+	if (rdev->family < CHIP_R600) {
+		int i;
+
+		for (i = 0; i < 8; i++) {
+			WREG32(RADEON_SURFACE0_INFO +
+			       i * (RADEON_SURFACE1_INFO - RADEON_SURFACE0_INFO),
+			       0);
+		}
+		/* enable surfaces */
+		WREG32(RADEON_SURFACE_CNTL, 0);
+	}
+}
+
+/*
  * GPU scratch registers helpers function.
  */
 static void radeon_scratch_init(struct radeon_device *rdev)
@@ -102,7 +121,7 @@ int radeon_mc_setup(struct radeon_device *rdev)
 	if (rdev->mc.vram_location != 0xFFFFFFFFUL) {
 		/* vram location was already setup try to put gtt after
 		 * if it fits */
-		tmp = rdev->mc.vram_location + rdev->mc.vram_size;
+		tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size;
 		tmp = (tmp + rdev->mc.gtt_size - 1) & ~(rdev->mc.gtt_size - 1);
 		if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) {
 			rdev->mc.gtt_location = tmp;
@@ -117,13 +136,13 @@ int radeon_mc_setup(struct radeon_device *rdev)
 	} else if (rdev->mc.gtt_location != 0xFFFFFFFFUL) {
 		/* gtt location was already setup try to put vram before
 		 * if it fits */
-		if (rdev->mc.vram_size < rdev->mc.gtt_location) {
+		if (rdev->mc.mc_vram_size < rdev->mc.gtt_location) {
 			rdev->mc.vram_location = 0;
 		} else {
 			tmp = rdev->mc.gtt_location + rdev->mc.gtt_size;
-			tmp += (rdev->mc.vram_size - 1);
-			tmp &= ~(rdev->mc.vram_size - 1);
-			if ((0xFFFFFFFFUL - tmp) >= rdev->mc.vram_size) {
+			tmp += (rdev->mc.mc_vram_size - 1);
+			tmp &= ~(rdev->mc.mc_vram_size - 1);
+			if ((0xFFFFFFFFUL - tmp) >= rdev->mc.mc_vram_size) {
 				rdev->mc.vram_location = tmp;
 			} else {
 				printk(KERN_ERR "[drm] vram too big to fit "
@@ -133,12 +152,16 @@ int radeon_mc_setup(struct radeon_device *rdev)
 		}
 	} else {
 		rdev->mc.vram_location = 0;
-		rdev->mc.gtt_location = rdev->mc.vram_size;
+		tmp = rdev->mc.mc_vram_size;
+		tmp = (tmp + rdev->mc.gtt_size - 1) & ~(rdev->mc.gtt_size - 1);
+		rdev->mc.gtt_location = tmp;
 	}
-	DRM_INFO("radeon: VRAM %uM\n", rdev->mc.vram_size >> 20);
+	DRM_INFO("radeon: VRAM %uM\n", rdev->mc.real_vram_size >> 20);
 	DRM_INFO("radeon: VRAM from 0x%08X to 0x%08X\n",
 		 rdev->mc.vram_location,
-		 rdev->mc.vram_location + rdev->mc.vram_size - 1);
+		 rdev->mc.vram_location + rdev->mc.mc_vram_size - 1);
+	if (rdev->mc.real_vram_size != rdev->mc.mc_vram_size)
+		DRM_INFO("radeon: VRAM less than aperture workaround enabled\n");
 	DRM_INFO("radeon: GTT %uM\n", rdev->mc.gtt_size >> 20);
 	DRM_INFO("radeon: GTT from 0x%08X to 0x%08X\n",
 		 rdev->mc.gtt_location,
@@ -202,25 +225,18 @@ void radeon_invalid_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 
 void radeon_register_accessor_init(struct radeon_device *rdev)
 {
-	rdev->mm_rreg = &r100_mm_rreg;
-	rdev->mm_wreg = &r100_mm_wreg;
 	rdev->mc_rreg = &radeon_invalid_rreg;
 	rdev->mc_wreg = &radeon_invalid_wreg;
 	rdev->pll_rreg = &radeon_invalid_rreg;
 	rdev->pll_wreg = &radeon_invalid_wreg;
-	rdev->pcie_rreg = &radeon_invalid_rreg;
-	rdev->pcie_wreg = &radeon_invalid_wreg;
 	rdev->pciep_rreg = &radeon_invalid_rreg;
 	rdev->pciep_wreg = &radeon_invalid_wreg;
 
 	/* Don't change order as we are overridding accessor. */
 	if (rdev->family < CHIP_RV515) {
-		rdev->pcie_rreg = &rv370_pcie_rreg;
-		rdev->pcie_wreg = &rv370_pcie_wreg;
-	}
-	if (rdev->family >= CHIP_RV515) {
-		rdev->pcie_rreg = &rv515_pcie_rreg;
-		rdev->pcie_wreg = &rv515_pcie_wreg;
+		rdev->pcie_reg_mask = 0xff;
+	} else {
+		rdev->pcie_reg_mask = 0x7ff;
 	}
 	/* FIXME: not sure here */
 	if (rdev->family <= CHIP_R580) {
@@ -433,6 +449,7 @@ int radeon_device_init(struct radeon_device *rdev,
 		       uint32_t flags)
 {
 	int r, ret;
+	int dma_bits;
 
 	DRM_INFO("radeon: Initializing kernel modesetting.\n");
 	rdev->shutdown = false;
@@ -475,8 +492,20 @@ int radeon_device_init(struct radeon_device *rdev,
 		return r;
 	}
 
-	/* Report DMA addressing limitation */
-	r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(32));
+	/* set DMA mask + need_dma32 flags.
+	 * PCIE - can handle 40-bits.
+	 * IGP - can handle 40-bits (in theory)
+	 * AGP - generally dma32 is safest
+	 * PCI - only dma32
+	 */
+	rdev->need_dma32 = false;
+	if (rdev->flags & RADEON_IS_AGP)
+		rdev->need_dma32 = true;
+	if (rdev->flags & RADEON_IS_PCI)
+		rdev->need_dma32 = true;
+
+	dma_bits = rdev->need_dma32 ? 32 : 40;
+	r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(dma_bits));
 	if (r) {
 		printk(KERN_WARNING "radeon: No suitable DMA available.\n");
 	}
@@ -496,6 +525,8 @@ int radeon_device_init(struct radeon_device *rdev,
 	radeon_errata(rdev);
 	/* Initialize scratch registers */
 	radeon_scratch_init(rdev);
+	/* Initialize surface registers */
+	radeon_surface_init(rdev);
 
 	/* TODO: disable VGA need to use VGA request */
 	/* BIOS*/
@@ -527,27 +558,22 @@ int radeon_device_init(struct radeon_device *rdev,
 			radeon_combios_asic_init(rdev->ddev);
 		}
 	}
+	/* Initialize clocks */
+	r = radeon_clocks_init(rdev);
+	if (r) {
+		return r;
+	}
 	/* Get vram informations */
 	radeon_vram_info(rdev);
-	/* Device is severly broken if aper size > vram size.
-	 * for RN50/M6/M7 - Novell bug 204882 ?
-	 */
-	if (rdev->mc.vram_size < rdev->mc.aper_size) {
-		rdev->mc.aper_size = rdev->mc.vram_size;
-	}
+
 	/* Add an MTRR for the VRAM */
 	rdev->mc.vram_mtrr = mtrr_add(rdev->mc.aper_base, rdev->mc.aper_size,
 				      MTRR_TYPE_WRCOMB, 1);
 	DRM_INFO("Detected VRAM RAM=%uM, BAR=%uM\n",
-		 rdev->mc.vram_size >> 20,
+		 rdev->mc.real_vram_size >> 20,
 		 (unsigned)rdev->mc.aper_size >> 20);
 	DRM_INFO("RAM width %dbits %cDR\n",
 		 rdev->mc.vram_width, rdev->mc.vram_is_ddr ? 'D' : 'S');
-	/* Initialize clocks */
-	r = radeon_clocks_init(rdev);
-	if (r) {
-		return r;
-	}
 	/* Initialize memory controller (also test AGP) */
 	r = radeon_mc_init(rdev);
 	if (r) {
@@ -604,12 +630,12 @@ int radeon_device_init(struct radeon_device *rdev,
 	if (r) {
 		return r;
 	}
-	if (rdev->fbdev_rfb && rdev->fbdev_rfb->obj) {
-		rdev->fbdev_robj = rdev->fbdev_rfb->obj->driver_private;
-	}
 	if (!ret) {
 		DRM_INFO("radeon: kernel modesetting successfully initialized.\n");
 	}
+	if (radeon_testing) {
+		radeon_test_moves(rdev);
+	}
 	if (radeon_benchmarking) {
 		radeon_benchmark(rdev);
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 3efcf1a526b..a8fa1bb84cf 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -187,6 +187,7 @@ static void radeon_crtc_init(struct drm_device *dev, int index)
 
 	drm_mode_crtc_set_gamma_size(&radeon_crtc->base, 256);
 	radeon_crtc->crtc_id = index;
+	rdev->mode_info.crtcs[index] = radeon_crtc;
 
 	radeon_crtc->mode_set.crtc = &radeon_crtc->base;
 	radeon_crtc->mode_set.connectors = (struct drm_connector **)(radeon_crtc + 1);
@@ -491,7 +492,11 @@ void radeon_compute_pll(struct radeon_pll *pll,
 					tmp += (uint64_t)pll->reference_freq * 1000 * frac_feedback_div;
 					current_freq = radeon_div(tmp, ref_div * post_div);
 
-					error = abs(current_freq - freq);
+					if (flags & RADEON_PLL_PREFER_CLOSEST_LOWER) {
+						error = freq - current_freq;
+						error = error < 0 ? 0xffffffff : error;
+					} else
+						error = abs(current_freq - freq);
 					vco_diff = abs(vco - best_vco);
 
 					if ((best_vco == 0 && error < best_error) ||
@@ -657,36 +662,51 @@ void radeon_modeset_fini(struct radeon_device *rdev)
 	}
 }
 
-void radeon_init_disp_bandwidth(struct drm_device *dev)
+bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
 {
-	struct radeon_device *rdev = dev->dev_private;
-	struct drm_display_mode *modes[2];
-	int pixel_bytes[2];
-	struct drm_crtc *crtc;
-
-	pixel_bytes[0] = pixel_bytes[1] = 0;
-	modes[0] = modes[1] = NULL;
-
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct drm_encoder *encoder;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct radeon_encoder *radeon_encoder;
+	bool first = true;
 
-		if (crtc->enabled && crtc->fb) {
-			modes[radeon_crtc->crtc_id] = &crtc->mode;
-			pixel_bytes[radeon_crtc->crtc_id] = crtc->fb->bits_per_pixel / 8;
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		radeon_encoder = to_radeon_encoder(encoder);
+		if (encoder->crtc != crtc)
+			continue;
+		if (first) {
+			radeon_crtc->rmx_type = radeon_encoder->rmx_type;
+			radeon_crtc->devices = radeon_encoder->devices;
+			memcpy(&radeon_crtc->native_mode,
+				&radeon_encoder->native_mode,
+				sizeof(struct radeon_native_mode));
+			first = false;
+		} else {
+			if (radeon_crtc->rmx_type != radeon_encoder->rmx_type) {
+				/* WARNING: Right now this can't happen but
+				 * in the future we need to check that scaling
+				 * are consistent accross different encoder
+				 * (ie all encoder can work with the same
+				 *  scaling).
+				 */
+				DRM_ERROR("Scaling not consistent accross encoder.\n");
+				return false;
+			}
 		}
 	}
-
-	if (ASIC_IS_AVIVO(rdev)) {
-		radeon_init_disp_bw_avivo(dev,
-					  modes[0],
-					  pixel_bytes[0],
-					  modes[1],
-					  pixel_bytes[1]);
+	if (radeon_crtc->rmx_type != RMX_OFF) {
+		fixed20_12 a, b;
+		a.full = rfixed_const(crtc->mode.vdisplay);
+		b.full = rfixed_const(radeon_crtc->native_mode.panel_xres);
+		radeon_crtc->vsc.full = rfixed_div(a, b);
+		a.full = rfixed_const(crtc->mode.hdisplay);
+		b.full = rfixed_const(radeon_crtc->native_mode.panel_yres);
+		radeon_crtc->hsc.full = rfixed_div(a, b);
 	} else {
-		radeon_init_disp_bw_legacy(dev,
-					   modes[0],
-					   pixel_bytes[0],
-					   modes[1],
-					   pixel_bytes[1]);
+		radeon_crtc->vsc.full = rfixed_const(1);
+		radeon_crtc->hsc.full = rfixed_const(1);
 	}
+	return true;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 09c9fb9f621..0bd5879a495 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -89,6 +89,7 @@ int radeon_agpmode = 0;
 int radeon_vram_limit = 0;
 int radeon_gart_size = 512; /* default gart size */
 int radeon_benchmarking = 0;
+int radeon_testing = 0;
 int radeon_connector_table = 0;
 #endif
 
@@ -117,6 +118,9 @@ module_param_named(gartsize, radeon_gart_size, int, 0600);
 MODULE_PARM_DESC(benchmark, "Run benchmark");
 module_param_named(benchmark, radeon_benchmarking, int, 0444);
 
+MODULE_PARM_DESC(test, "Run tests");
+module_param_named(test, radeon_testing, int, 0444);
+
 MODULE_PARM_DESC(connector_table, "Force connector table");
 module_param_named(connector_table, radeon_connector_table, int, 0444);
 #endif
@@ -314,6 +318,14 @@ static int __init radeon_init(void)
 	driver = &driver_old;
 	driver->num_ioctls = radeon_max_ioctl;
 #if defined(CONFIG_DRM_RADEON_KMS)
+#ifdef CONFIG_VGA_CONSOLE
+	if (vgacon_text_force() && radeon_modeset == -1) {
+		DRM_INFO("VGACON disable radeon kernel modesetting.\n");
+		driver = &driver_old;
+		driver->driver_features &= ~DRIVER_MODESET;
+		radeon_modeset = 0;
+	}
+#endif
 	/* if enabled by default */
 	if (radeon_modeset == -1) {
 		DRM_INFO("radeon default to kernel modesetting.\n");
@@ -325,17 +337,8 @@ static int __init radeon_init(void)
 		driver->driver_features |= DRIVER_MODESET;
 		driver->num_ioctls = radeon_max_kms_ioctl;
 	}
-
 	/* if the vga console setting is enabled still
 	 * let modprobe override it */
-#ifdef CONFIG_VGA_CONSOLE
-	if (vgacon_text_force() && radeon_modeset == -1) {
-		DRM_INFO("VGACON disable radeon kernel modesetting.\n");
-		driver = &driver_old;
-		driver->driver_features &= ~DRIVER_MODESET;
-		radeon_modeset = 0;
-	}
-#endif
 #endif
 	return drm_init(driver);
 }
@@ -345,7 +348,7 @@ static void __exit radeon_exit(void)
 	drm_exit(driver);
 }
 
-late_initcall(radeon_init);
+module_init(radeon_init);
 module_exit(radeon_exit);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 127d0456f62..6fa32dac4e9 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -100,9 +100,10 @@
  * 1.28- Add support for VBL on CRTC2
  * 1.29- R500 3D cmd buffer support
  * 1.30- Add support for occlusion queries
+ * 1.31- Add support for num Z pipes from GET_PARAM
  */
 #define DRIVER_MAJOR		1
-#define DRIVER_MINOR		30
+#define DRIVER_MINOR		31
 #define DRIVER_PATCHLEVEL	0
 
 /*
@@ -143,6 +144,7 @@ enum radeon_family {
 	CHIP_RV635,
 	CHIP_RV670,
 	CHIP_RS780,
+	CHIP_RS880,
 	CHIP_RV770,
 	CHIP_RV730,
 	CHIP_RV710,
@@ -328,6 +330,7 @@ typedef struct drm_radeon_private {
 	resource_size_t fb_aper_offset;
 
 	int num_gb_pipes;
+	int num_z_pipes;
 	int track_flush;
 	drm_local_map_t *mmio;
 
@@ -688,6 +691,7 @@ extern void r600_page_table_cleanup(struct drm_device *dev, struct drm_ati_pciga
 
 /* pipe config regs */
 #define R400_GB_PIPE_SELECT             0x402c
+#define RV530_GB_PIPE_SELECT2           0x4124
 #define R500_DYN_SCLK_PWMEM_PIPE        0x000d /* PLL */
 #define R300_GB_TILE_CONFIG             0x4018
 #       define R300_ENABLE_TILING       (1 << 0)
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index c8ef0d14ffa..0a92706eac1 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -154,7 +154,6 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder,
 
 	if (mode->hdisplay < native_mode->panel_xres ||
 	    mode->vdisplay < native_mode->panel_yres) {
-		radeon_encoder->flags |= RADEON_USE_RMX;
 		if (ASIC_IS_AVIVO(rdev)) {
 			adjusted_mode->hdisplay = native_mode->panel_xres;
 			adjusted_mode->vdisplay = native_mode->panel_yres;
@@ -197,15 +196,13 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder,
 	}
 }
 
+
 static bool radeon_atom_mode_fixup(struct drm_encoder *encoder,
 				   struct drm_display_mode *mode,
 				   struct drm_display_mode *adjusted_mode)
 {
-
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 
-	radeon_encoder->flags &= ~RADEON_USE_RMX;
-
 	drm_mode_set_crtcinfo(adjusted_mode, 0);
 
 	if (radeon_encoder->rmx_type != RMX_OFF)
@@ -808,234 +805,6 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action)
 
 }
 
-static void atom_rv515_force_tv_scaler(struct radeon_device *rdev)
-{
-
-	WREG32(0x659C, 0x0);
-	WREG32(0x6594, 0x705);
-	WREG32(0x65A4, 0x10001);
-	WREG32(0x65D8, 0x0);
-	WREG32(0x65B0, 0x0);
-	WREG32(0x65C0, 0x0);
-	WREG32(0x65D4, 0x0);
-	WREG32(0x6578, 0x0);
-	WREG32(0x657C, 0x841880A8);
-	WREG32(0x6578, 0x1);
-	WREG32(0x657C, 0x84208680);
-	WREG32(0x6578, 0x2);
-	WREG32(0x657C, 0xBFF880B0);
-	WREG32(0x6578, 0x100);
-	WREG32(0x657C, 0x83D88088);
-	WREG32(0x6578, 0x101);
-	WREG32(0x657C, 0x84608680);
-	WREG32(0x6578, 0x102);
-	WREG32(0x657C, 0xBFF080D0);
-	WREG32(0x6578, 0x200);
-	WREG32(0x657C, 0x83988068);
-	WREG32(0x6578, 0x201);
-	WREG32(0x657C, 0x84A08680);
-	WREG32(0x6578, 0x202);
-	WREG32(0x657C, 0xBFF080F8);
-	WREG32(0x6578, 0x300);
-	WREG32(0x657C, 0x83588058);
-	WREG32(0x6578, 0x301);
-	WREG32(0x657C, 0x84E08660);
-	WREG32(0x6578, 0x302);
-	WREG32(0x657C, 0xBFF88120);
-	WREG32(0x6578, 0x400);
-	WREG32(0x657C, 0x83188040);
-	WREG32(0x6578, 0x401);
-	WREG32(0x657C, 0x85008660);
-	WREG32(0x6578, 0x402);
-	WREG32(0x657C, 0xBFF88150);
-	WREG32(0x6578, 0x500);
-	WREG32(0x657C, 0x82D88030);
-	WREG32(0x6578, 0x501);
-	WREG32(0x657C, 0x85408640);
-	WREG32(0x6578, 0x502);
-	WREG32(0x657C, 0xBFF88180);
-	WREG32(0x6578, 0x600);
-	WREG32(0x657C, 0x82A08018);
-	WREG32(0x6578, 0x601);
-	WREG32(0x657C, 0x85808620);
-	WREG32(0x6578, 0x602);
-	WREG32(0x657C, 0xBFF081B8);
-	WREG32(0x6578, 0x700);
-	WREG32(0x657C, 0x82608010);
-	WREG32(0x6578, 0x701);
-	WREG32(0x657C, 0x85A08600);
-	WREG32(0x6578, 0x702);
-	WREG32(0x657C, 0x800081F0);
-	WREG32(0x6578, 0x800);
-	WREG32(0x657C, 0x8228BFF8);
-	WREG32(0x6578, 0x801);
-	WREG32(0x657C, 0x85E085E0);
-	WREG32(0x6578, 0x802);
-	WREG32(0x657C, 0xBFF88228);
-	WREG32(0x6578, 0x10000);
-	WREG32(0x657C, 0x82A8BF00);
-	WREG32(0x6578, 0x10001);
-	WREG32(0x657C, 0x82A08CC0);
-	WREG32(0x6578, 0x10002);
-	WREG32(0x657C, 0x8008BEF8);
-	WREG32(0x6578, 0x10100);
-	WREG32(0x657C, 0x81F0BF28);
-	WREG32(0x6578, 0x10101);
-	WREG32(0x657C, 0x83608CA0);
-	WREG32(0x6578, 0x10102);
-	WREG32(0x657C, 0x8018BED0);
-	WREG32(0x6578, 0x10200);
-	WREG32(0x657C, 0x8148BF38);
-	WREG32(0x6578, 0x10201);
-	WREG32(0x657C, 0x84408C80);
-	WREG32(0x6578, 0x10202);
-	WREG32(0x657C, 0x8008BEB8);
-	WREG32(0x6578, 0x10300);
-	WREG32(0x657C, 0x80B0BF78);
-	WREG32(0x6578, 0x10301);
-	WREG32(0x657C, 0x85008C20);
-	WREG32(0x6578, 0x10302);
-	WREG32(0x657C, 0x8020BEA0);
-	WREG32(0x6578, 0x10400);
-	WREG32(0x657C, 0x8028BF90);
-	WREG32(0x6578, 0x10401);
-	WREG32(0x657C, 0x85E08BC0);
-	WREG32(0x6578, 0x10402);
-	WREG32(0x657C, 0x8018BE90);
-	WREG32(0x6578, 0x10500);
-	WREG32(0x657C, 0xBFB8BFB0);
-	WREG32(0x6578, 0x10501);
-	WREG32(0x657C, 0x86C08B40);
-	WREG32(0x6578, 0x10502);
-	WREG32(0x657C, 0x8010BE90);
-	WREG32(0x6578, 0x10600);
-	WREG32(0x657C, 0xBF58BFC8);
-	WREG32(0x6578, 0x10601);
-	WREG32(0x657C, 0x87A08AA0);
-	WREG32(0x6578, 0x10602);
-	WREG32(0x657C, 0x8010BE98);
-	WREG32(0x6578, 0x10700);
-	WREG32(0x657C, 0xBF10BFF0);
-	WREG32(0x6578, 0x10701);
-	WREG32(0x657C, 0x886089E0);
-	WREG32(0x6578, 0x10702);
-	WREG32(0x657C, 0x8018BEB0);
-	WREG32(0x6578, 0x10800);
-	WREG32(0x657C, 0xBED8BFE8);
-	WREG32(0x6578, 0x10801);
-	WREG32(0x657C, 0x89408940);
-	WREG32(0x6578, 0x10802);
-	WREG32(0x657C, 0xBFE8BED8);
-	WREG32(0x6578, 0x20000);
-	WREG32(0x657C, 0x80008000);
-	WREG32(0x6578, 0x20001);
-	WREG32(0x657C, 0x90008000);
-	WREG32(0x6578, 0x20002);
-	WREG32(0x657C, 0x80008000);
-	WREG32(0x6578, 0x20003);
-	WREG32(0x657C, 0x80008000);
-	WREG32(0x6578, 0x20100);
-	WREG32(0x657C, 0x80108000);
-	WREG32(0x6578, 0x20101);
-	WREG32(0x657C, 0x8FE0BF70);
-	WREG32(0x6578, 0x20102);
-	WREG32(0x657C, 0xBFE880C0);
-	WREG32(0x6578, 0x20103);
-	WREG32(0x657C, 0x80008000);
-	WREG32(0x6578, 0x20200);
-	WREG32(0x657C, 0x8018BFF8);
-	WREG32(0x6578, 0x20201);
-	WREG32(0x657C, 0x8F80BF08);
-	WREG32(0x6578, 0x20202);
-	WREG32(0x657C, 0xBFD081A0);
-	WREG32(0x6578, 0x20203);
-	WREG32(0x657C, 0xBFF88000);
-	WREG32(0x6578, 0x20300);
-	WREG32(0x657C, 0x80188000);
-	WREG32(0x6578, 0x20301);
-	WREG32(0x657C, 0x8EE0BEC0);
-	WREG32(0x6578, 0x20302);
-	WREG32(0x657C, 0xBFB082A0);
-	WREG32(0x6578, 0x20303);
-	WREG32(0x657C, 0x80008000);
-	WREG32(0x6578, 0x20400);
-	WREG32(0x657C, 0x80188000);
-	WREG32(0x6578, 0x20401);
-	WREG32(0x657C, 0x8E00BEA0);
-	WREG32(0x6578, 0x20402);
-	WREG32(0x657C, 0xBF8883C0);
-	WREG32(0x6578, 0x20403);
-	WREG32(0x657C, 0x80008000);
-	WREG32(0x6578, 0x20500);
-	WREG32(0x657C, 0x80188000);
-	WREG32(0x6578, 0x20501);
-	WREG32(0x657C, 0x8D00BE90);
-	WREG32(0x6578, 0x20502);
-	WREG32(0x657C, 0xBF588500);
-	WREG32(0x6578, 0x20503);
-	WREG32(0x657C, 0x80008008);
-	WREG32(0x6578, 0x20600);
-	WREG32(0x657C, 0x80188000);
-	WREG32(0x6578, 0x20601);
-	WREG32(0x657C, 0x8BC0BE98);
-	WREG32(0x6578, 0x20602);
-	WREG32(0x657C, 0xBF308660);
-	WREG32(0x6578, 0x20603);
-	WREG32(0x657C, 0x80008008);
-	WREG32(0x6578, 0x20700);
-	WREG32(0x657C, 0x80108000);
-	WREG32(0x6578, 0x20701);
-	WREG32(0x657C, 0x8A80BEB0);
-	WREG32(0x6578, 0x20702);
-	WREG32(0x657C, 0xBF0087C0);
-	WREG32(0x6578, 0x20703);
-	WREG32(0x657C, 0x80008008);
-	WREG32(0x6578, 0x20800);
-	WREG32(0x657C, 0x80108000);
-	WREG32(0x6578, 0x20801);
-	WREG32(0x657C, 0x8920BED0);
-	WREG32(0x6578, 0x20802);
-	WREG32(0x657C, 0xBED08920);
-	WREG32(0x6578, 0x20803);
-	WREG32(0x657C, 0x80008010);
-	WREG32(0x6578, 0x30000);
-	WREG32(0x657C, 0x90008000);
-	WREG32(0x6578, 0x30001);
-	WREG32(0x657C, 0x80008000);
-	WREG32(0x6578, 0x30100);
-	WREG32(0x657C, 0x8FE0BF90);
-	WREG32(0x6578, 0x30101);
-	WREG32(0x657C, 0xBFF880A0);
-	WREG32(0x6578, 0x30200);
-	WREG32(0x657C, 0x8F60BF40);
-	WREG32(0x6578, 0x30201);
-	WREG32(0x657C, 0xBFE88180);
-	WREG32(0x6578, 0x30300);
-	WREG32(0x657C, 0x8EC0BF00);
-	WREG32(0x6578, 0x30301);
-	WREG32(0x657C, 0xBFC88280);
-	WREG32(0x6578, 0x30400);
-	WREG32(0x657C, 0x8DE0BEE0);
-	WREG32(0x6578, 0x30401);
-	WREG32(0x657C, 0xBFA083A0);
-	WREG32(0x6578, 0x30500);
-	WREG32(0x657C, 0x8CE0BED0);
-	WREG32(0x6578, 0x30501);
-	WREG32(0x657C, 0xBF7884E0);
-	WREG32(0x6578, 0x30600);
-	WREG32(0x657C, 0x8BA0BED8);
-	WREG32(0x6578, 0x30601);
-	WREG32(0x657C, 0xBF508640);
-	WREG32(0x6578, 0x30700);
-	WREG32(0x657C, 0x8A60BEE8);
-	WREG32(0x6578, 0x30701);
-	WREG32(0x657C, 0xBF2087A0);
-	WREG32(0x6578, 0x30800);
-	WREG32(0x657C, 0x8900BF00);
-	WREG32(0x6578, 0x30801);
-	WREG32(0x657C, 0xBF008900);
-}
-
 static void
 atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
 {
@@ -1074,129 +843,6 @@ atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
 }
 
 static void
-atombios_overscan_setup(struct drm_encoder *encoder,
-			struct drm_display_mode *mode,
-			struct drm_display_mode *adjusted_mode)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-	SET_CRTC_OVERSCAN_PS_ALLOCATION args;
-	int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_OverScan);
-
-	memset(&args, 0, sizeof(args));
-
-	args.usOverscanRight = 0;
-	args.usOverscanLeft = 0;
-	args.usOverscanBottom = 0;
-	args.usOverscanTop = 0;
-	args.ucCRTC = radeon_crtc->crtc_id;
-
-	if (radeon_encoder->flags & RADEON_USE_RMX) {
-		if (radeon_encoder->rmx_type == RMX_FULL) {
-			args.usOverscanRight = 0;
-			args.usOverscanLeft = 0;
-			args.usOverscanBottom = 0;
-			args.usOverscanTop = 0;
-		} else if (radeon_encoder->rmx_type == RMX_CENTER) {
-			args.usOverscanTop = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
-			args.usOverscanBottom = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
-			args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
-			args.usOverscanRight = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
-		} else if (radeon_encoder->rmx_type == RMX_ASPECT) {
-			int a1 = mode->crtc_vdisplay * adjusted_mode->crtc_hdisplay;
-			int a2 = adjusted_mode->crtc_vdisplay * mode->crtc_hdisplay;
-
-			if (a1 > a2) {
-				args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
-				args.usOverscanRight = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
-			} else if (a2 > a1) {
-				args.usOverscanLeft = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
-				args.usOverscanRight = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
-			}
-		}
-	}
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-}
-
-static void
-atombios_scaler_setup(struct drm_encoder *encoder)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-	ENABLE_SCALER_PS_ALLOCATION args;
-	int index = GetIndexIntoMasterTable(COMMAND, EnableScaler);
-	/* fixme - fill in enc_priv for atom dac */
-	enum radeon_tv_std tv_std = TV_STD_NTSC;
-
-	if (!ASIC_IS_AVIVO(rdev) && radeon_crtc->crtc_id)
-		return;
-
-	memset(&args, 0, sizeof(args));
-
-	args.ucScaler = radeon_crtc->crtc_id;
-
-	if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT)) {
-		switch (tv_std) {
-		case TV_STD_NTSC:
-		default:
-			args.ucTVStandard = ATOM_TV_NTSC;
-			break;
-		case TV_STD_PAL:
-			args.ucTVStandard = ATOM_TV_PAL;
-			break;
-		case TV_STD_PAL_M:
-			args.ucTVStandard = ATOM_TV_PALM;
-			break;
-		case TV_STD_PAL_60:
-			args.ucTVStandard = ATOM_TV_PAL60;
-			break;
-		case TV_STD_NTSC_J:
-			args.ucTVStandard = ATOM_TV_NTSCJ;
-			break;
-		case TV_STD_SCART_PAL:
-			args.ucTVStandard = ATOM_TV_PAL; /* ??? */
-			break;
-		case TV_STD_SECAM:
-			args.ucTVStandard = ATOM_TV_SECAM;
-			break;
-		case TV_STD_PAL_CN:
-			args.ucTVStandard = ATOM_TV_PALCN;
-			break;
-		}
-		args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
-	} else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT)) {
-		args.ucTVStandard = ATOM_TV_CV;
-		args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
-	} else if (radeon_encoder->flags & RADEON_USE_RMX) {
-		if (radeon_encoder->rmx_type == RMX_FULL)
-			args.ucEnable = ATOM_SCALER_EXPANSION;
-		else if (radeon_encoder->rmx_type == RMX_CENTER)
-			args.ucEnable = ATOM_SCALER_CENTER;
-		else if (radeon_encoder->rmx_type == RMX_ASPECT)
-			args.ucEnable = ATOM_SCALER_EXPANSION;
-	} else {
-		if (ASIC_IS_AVIVO(rdev))
-			args.ucEnable = ATOM_SCALER_DISABLE;
-		else
-			args.ucEnable = ATOM_SCALER_CENTER;
-	}
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-	if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)
-	    && rdev->family >= CHIP_RV515 && rdev->family <= CHIP_RV570) {
-		atom_rv515_force_tv_scaler(rdev);
-	}
-
-}
-
-static void
 radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_device *dev = encoder->dev;
@@ -1448,8 +1094,6 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
 	radeon_encoder->pixel_clock = adjusted_mode->clock;
 
 	radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
-	atombios_overscan_setup(encoder, mode, adjusted_mode);
-	atombios_scaler_setup(encoder);
 	atombios_set_encoder_crtc_source(encoder);
 
 	if (ASIC_IS_AVIVO(rdev)) {
@@ -1667,6 +1311,7 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t su
 
 	radeon_encoder->encoder_id = encoder_id;
 	radeon_encoder->devices = supported_device;
+	radeon_encoder->rmx_type = RMX_OFF;
 
 	switch (radeon_encoder->encoder_id) {
 	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index fa86d398945..ec383edf5f3 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -101,9 +101,10 @@ static int radeonfb_setcolreg(unsigned regno,
 				break;
 			case 24:
 			case 32:
-				fb->pseudo_palette[regno] = ((red & 0xff00) << 8) |
-					(green & 0xff00) |
-					((blue  & 0xff00) >> 8);
+				fb->pseudo_palette[regno] =
+					(((red >> 8) & 0xff) << info->var.red.offset) |
+					(((green >> 8) & 0xff) << info->var.green.offset) |
+					(((blue >> 8) & 0xff) << info->var.blue.offset);
 				break;
 			}
 		}
@@ -154,6 +155,7 @@ static int radeonfb_check_var(struct fb_var_screeninfo *var,
 		var->transp.length = 0;
 		var->transp.offset = 0;
 		break;
+#ifdef __LITTLE_ENDIAN
 	case 15:
 		var->red.offset = 10;
 		var->green.offset = 5;
@@ -194,6 +196,28 @@ static int radeonfb_check_var(struct fb_var_screeninfo *var,
 		var->transp.length = 8;
 		var->transp.offset = 24;
 		break;
+#else
+	case 24:
+		var->red.offset = 8;
+		var->green.offset = 16;
+		var->blue.offset = 24;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		break;
+	case 32:
+		var->red.offset = 8;
+		var->green.offset = 16;
+		var->blue.offset = 24;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		var->transp.length = 8;
+		var->transp.offset = 0;
+		break;
+#endif
 	default:
 		return -EINVAL;
 	}
@@ -447,10 +471,10 @@ static struct notifier_block paniced = {
 	.notifier_call = radeonfb_panic,
 };
 
-static int radeon_align_pitch(struct radeon_device *rdev, int width, int bpp)
+static int radeon_align_pitch(struct radeon_device *rdev, int width, int bpp, bool tiled)
 {
 	int aligned = width;
-	int align_large = (ASIC_IS_AVIVO(rdev));
+	int align_large = (ASIC_IS_AVIVO(rdev)) || tiled;
 	int pitch_mask = 0;
 
 	switch (bpp / 8) {
@@ -478,36 +502,42 @@ int radeonfb_create(struct radeon_device *rdev,
 {
 	struct fb_info *info;
 	struct radeon_fb_device *rfbdev;
-	struct drm_framebuffer *fb;
+	struct drm_framebuffer *fb = NULL;
 	struct radeon_framebuffer *rfb;
 	struct drm_mode_fb_cmd mode_cmd;
 	struct drm_gem_object *gobj = NULL;
 	struct radeon_object *robj = NULL;
 	struct device *device = &rdev->pdev->dev;
 	int size, aligned_size, ret;
+	u64 fb_gpuaddr;
 	void *fbptr = NULL;
+	unsigned long tmp;
+	bool fb_tiled = false; /* useful for testing */
 
 	mode_cmd.width = surface_width;
 	mode_cmd.height = surface_height;
 	mode_cmd.bpp = 32;
 	/* need to align pitch with crtc limits */
-	mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp) * ((mode_cmd.bpp + 1) / 8);
+	mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp, fb_tiled) * ((mode_cmd.bpp + 1) / 8);
 	mode_cmd.depth = 24;
 
 	size = mode_cmd.pitch * mode_cmd.height;
 	aligned_size = ALIGN(size, PAGE_SIZE);
 
 	ret = radeon_gem_object_create(rdev, aligned_size, 0,
-				       RADEON_GEM_DOMAIN_VRAM,
-				       false, ttm_bo_type_kernel,
-				       false, &gobj);
+			RADEON_GEM_DOMAIN_VRAM,
+			false, ttm_bo_type_kernel,
+			false, &gobj);
 	if (ret) {
-		printk(KERN_ERR "failed to allocate framebuffer\n");
+		printk(KERN_ERR "failed to allocate framebuffer (%d %d)\n",
+		       surface_width, surface_height);
 		ret = -ENOMEM;
 		goto out;
 	}
 	robj = gobj->driver_private;
 
+	if (fb_tiled)
+		radeon_object_set_tiling_flags(robj, RADEON_TILING_MACRO|RADEON_TILING_SURFACE, mode_cmd.pitch);
 	mutex_lock(&rdev->ddev->struct_mutex);
 	fb = radeon_framebuffer_create(rdev->ddev, &mode_cmd, gobj);
 	if (fb == NULL) {
@@ -515,12 +545,19 @@ int radeonfb_create(struct radeon_device *rdev,
 		ret = -ENOMEM;
 		goto out_unref;
 	}
+	ret = radeon_object_pin(robj, RADEON_GEM_DOMAIN_VRAM, &fb_gpuaddr);
+	if (ret) {
+		printk(KERN_ERR "failed to pin framebuffer\n");
+		ret = -ENOMEM;
+		goto out_unref;
+	}
 
 	list_add(&fb->filp_head, &rdev->ddev->mode_config.fb_kernel_list);
 
 	rfb = to_radeon_framebuffer(fb);
 	*rfb_p = rfb;
 	rdev->fbdev_rfb = rfb;
+	rdev->fbdev_robj = robj;
 
 	info = framebuffer_alloc(sizeof(struct radeon_fb_device), device);
 	if (info == NULL) {
@@ -529,11 +566,16 @@ int radeonfb_create(struct radeon_device *rdev,
 	}
 	rfbdev = info->par;
 
+	if (fb_tiled)
+		radeon_object_check_tiling(robj, 0, 0);
+
 	ret = radeon_object_kmap(robj, &fbptr);
 	if (ret) {
 		goto out_unref;
 	}
 
+	memset_io(fbptr, 0, aligned_size);
+
 	strcpy(info->fix.id, "radeondrmfb");
 	info->fix.type = FB_TYPE_PACKED_PIXELS;
 	info->fix.visual = FB_VISUAL_TRUECOLOR;
@@ -541,13 +583,13 @@ int radeonfb_create(struct radeon_device *rdev,
 	info->fix.xpanstep = 1; /* doing it in hw */
 	info->fix.ypanstep = 1; /* doing it in hw */
 	info->fix.ywrapstep = 0;
-	info->fix.accel = FB_ACCEL_I830;
+	info->fix.accel = FB_ACCEL_NONE;
 	info->fix.type_aux = 0;
 	info->flags = FBINFO_DEFAULT;
 	info->fbops = &radeonfb_ops;
 	info->fix.line_length = fb->pitch;
-	info->screen_base = fbptr;
-	info->fix.smem_start = (unsigned long)fbptr;
+	tmp = fb_gpuaddr - rdev->mc.vram_location;
+	info->fix.smem_start = rdev->mc.aper_base + tmp;
 	info->fix.smem_len = size;
 	info->screen_base = fbptr;
 	info->screen_size = size;
@@ -562,8 +604,13 @@ int radeonfb_create(struct radeon_device *rdev,
 	info->var.width = -1;
 	info->var.xres = fb_width;
 	info->var.yres = fb_height;
-	info->fix.mmio_start = pci_resource_start(rdev->pdev, 2);
-	info->fix.mmio_len = pci_resource_len(rdev->pdev, 2);
+
+	/* setup aperture base/size for vesafb takeover */
+	info->aperture_base = rdev->ddev->mode_config.fb_base;
+	info->aperture_size = rdev->mc.real_vram_size;
+
+	info->fix.mmio_start = 0;
+	info->fix.mmio_len = 0;
 	info->pixmap.size = 64*1024;
 	info->pixmap.buf_align = 8;
 	info->pixmap.access_align = 32;
@@ -590,6 +637,7 @@ int radeonfb_create(struct radeon_device *rdev,
 		info->var.transp.offset = 0;
 		info->var.transp.length = 0;
 		break;
+#ifdef __LITTLE_ENDIAN
 	case 15:
 		info->var.red.offset = 10;
 		info->var.green.offset = 5;
@@ -629,7 +677,29 @@ int radeonfb_create(struct radeon_device *rdev,
 		info->var.transp.offset = 24;
 		info->var.transp.length = 8;
 		break;
+#else
+	case 24:
+		info->var.red.offset = 8;
+		info->var.green.offset = 16;
+		info->var.blue.offset = 24;
+		info->var.red.length = 8;
+		info->var.green.length = 8;
+		info->var.blue.length = 8;
+		info->var.transp.offset = 0;
+		info->var.transp.length = 0;
+		break;
+	case 32:
+		info->var.red.offset = 8;
+		info->var.green.offset = 16;
+		info->var.blue.offset = 24;
+		info->var.red.length = 8;
+		info->var.green.length = 8;
+		info->var.blue.length = 8;
+		info->var.transp.offset = 0;
+		info->var.transp.length = 8;
+		break;
 	default:
+#endif
 		break;
 	}
 
@@ -644,7 +714,7 @@ out_unref:
 	if (robj) {
 		radeon_object_kunmap(robj);
 	}
-	if (ret) {
+	if (fb && ret) {
 		list_del(&fb->filp_head);
 		drm_gem_object_unreference(gobj);
 		drm_framebuffer_cleanup(fb);
@@ -813,6 +883,7 @@ int radeonfb_remove(struct drm_device *dev, struct drm_framebuffer *fb)
 		robj = rfb->obj->driver_private;
 		unregister_framebuffer(info);
 		radeon_object_kunmap(robj);
+		radeon_object_unpin(robj);
 		framebuffer_release(info);
 	}
 
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 96afbf5ae2a..b4e48dd2e85 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -195,7 +195,7 @@ retry:
 		r = wait_event_interruptible_timeout(rdev->fence_drv.queue,
 				radeon_fence_signaled(fence), timeout);
 		if (unlikely(r == -ERESTARTSYS)) {
-			return -ERESTART;
+			return -EBUSY;
 		}
 	} else {
 		r = wait_event_timeout(rdev->fence_drv.queue,
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index d343a15316e..2977539880f 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -177,7 +177,7 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset,
 			return -ENOMEM;
 		}
 		rdev->gart.pages[p] = pagelist[i];
-		page_base = (uint32_t)rdev->gart.pages_addr[p];
+		page_base = rdev->gart.pages_addr[p];
 		for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) {
 			radeon_gart_set_page(rdev, t, page_base);
 			page_base += 4096;
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index eb516034235..d880edf254d 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -157,9 +157,9 @@ int radeon_gem_info_ioctl(struct drm_device *dev, void *data,
 	struct radeon_device *rdev = dev->dev_private;
 	struct drm_radeon_gem_info *args = data;
 
-	args->vram_size = rdev->mc.vram_size;
+	args->vram_size = rdev->mc.real_vram_size;
 	/* FIXME: report somethings that makes sense */
-	args->vram_visible = rdev->mc.vram_size - (4 * 1024 * 1024);
+	args->vram_visible = rdev->mc.real_vram_size - (4 * 1024 * 1024);
 	args->gart_size = rdev->mc.gtt_size;
 	return 0;
 }
@@ -262,8 +262,34 @@ int radeon_gem_mmap_ioctl(struct drm_device *dev, void *data,
 int radeon_gem_busy_ioctl(struct drm_device *dev, void *data,
 			  struct drm_file *filp)
 {
-	/* FIXME: implement */
-	return 0;
+	struct drm_radeon_gem_busy *args = data;
+	struct drm_gem_object *gobj;
+	struct radeon_object *robj;
+	int r;
+	uint32_t cur_placement;
+
+	gobj = drm_gem_object_lookup(dev, filp, args->handle);
+	if (gobj == NULL) {
+		return -EINVAL;
+	}
+	robj = gobj->driver_private;
+	r = radeon_object_busy_domain(robj, &cur_placement);
+	switch (cur_placement) {
+	case TTM_PL_VRAM:
+		args->domain = RADEON_GEM_DOMAIN_VRAM;
+		break;
+	case TTM_PL_TT:
+		args->domain = RADEON_GEM_DOMAIN_GTT;
+		break;
+	case TTM_PL_SYSTEM:
+		args->domain = RADEON_GEM_DOMAIN_CPU;
+	default:
+		break;
+	}
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_unreference(gobj);
+	mutex_unlock(&dev->struct_mutex);
+	return r;
 }
 
 int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
@@ -285,3 +311,44 @@ int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
 	mutex_unlock(&dev->struct_mutex);
 	return r;
 }
+
+int radeon_gem_set_tiling_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *filp)
+{
+	struct drm_radeon_gem_set_tiling *args = data;
+	struct drm_gem_object *gobj;
+	struct radeon_object *robj;
+	int r = 0;
+
+	DRM_DEBUG("%d \n", args->handle);
+	gobj = drm_gem_object_lookup(dev, filp, args->handle);
+	if (gobj == NULL)
+		return -EINVAL;
+	robj = gobj->driver_private;
+	radeon_object_set_tiling_flags(robj, args->tiling_flags, args->pitch);
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_unreference(gobj);
+	mutex_unlock(&dev->struct_mutex);
+	return r;
+}
+
+int radeon_gem_get_tiling_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *filp)
+{
+	struct drm_radeon_gem_get_tiling *args = data;
+	struct drm_gem_object *gobj;
+	struct radeon_object *robj;
+	int r = 0;
+
+	DRM_DEBUG("\n");
+	gobj = drm_gem_object_lookup(dev, filp, args->handle);
+	if (gobj == NULL)
+		return -EINVAL;
+	robj = gobj->driver_private;
+	radeon_object_get_tiling_flags(robj, &args->tiling_flags,
+				       &args->pitch);
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_unreference(gobj);
+	mutex_unlock(&dev->struct_mutex);
+	return r;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c
index 491d569deb0..9805e4b6ca1 100644
--- a/drivers/gpu/drm/radeon/radeon_irq_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c
@@ -32,60 +32,6 @@
 #include "radeon.h"
 #include "atom.h"
 
-static inline uint32_t r100_irq_ack(struct radeon_device *rdev)
-{
-	uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS);
-	uint32_t irq_mask = RADEON_SW_INT_TEST;
-
-	if (irqs) {
-		WREG32(RADEON_GEN_INT_STATUS, irqs);
-	}
-	return irqs & irq_mask;
-}
-
-int r100_irq_set(struct radeon_device *rdev)
-{
-	uint32_t tmp = 0;
-
-	if (rdev->irq.sw_int) {
-		tmp |= RADEON_SW_INT_ENABLE;
-	}
-	/* Todo go through CRTC and enable vblank int or not */
-	WREG32(RADEON_GEN_INT_CNTL, tmp);
-	return 0;
-}
-
-int r100_irq_process(struct radeon_device *rdev)
-{
-	uint32_t status;
-
-	status = r100_irq_ack(rdev);
-	if (!status) {
-		return IRQ_NONE;
-	}
-	while (status) {
-		/* SW interrupt */
-		if (status & RADEON_SW_INT_TEST) {
-			radeon_fence_process(rdev);
-		}
-		status = r100_irq_ack(rdev);
-	}
-	return IRQ_HANDLED;
-}
-
-int rs600_irq_set(struct radeon_device *rdev)
-{
-	uint32_t tmp = 0;
-
-	if (rdev->irq.sw_int) {
-		tmp |= RADEON_SW_INT_ENABLE;
-	}
-	WREG32(RADEON_GEN_INT_CNTL, tmp);
-	/* Todo go through CRTC and enable vblank int or not */
-	WREG32(R500_DxMODE_INT_MASK, 0);
-	return 0;
-}
-
 irqreturn_t radeon_driver_irq_handler_kms(DRM_IRQ_ARGS)
 {
 	struct drm_device *dev = (struct drm_device *) arg;
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 4612a7c146d..dce09ada32b 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -58,6 +58,8 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
 	if (r) {
 		DRM_ERROR("Failed to initialize radeon, disabling IOCTL\n");
 		radeon_device_fini(rdev);
+		kfree(rdev);
+		dev->dev_private = NULL;
 		return r;
 	}
 	return 0;
@@ -93,6 +95,9 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 	case RADEON_INFO_NUM_GB_PIPES:
 		value = rdev->num_gb_pipes;
 		break;
+	case RADEON_INFO_NUM_Z_PIPES:
+		value = rdev->num_z_pipes;
+		break;
 	default:
 		DRM_DEBUG("Invalid request %d\n", info->request);
 		return -EINVAL;
@@ -139,19 +144,42 @@ void radeon_driver_preclose_kms(struct drm_device *dev,
  */
 u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc)
 {
-	/* FIXME: implement */
-	return 0;
+	struct radeon_device *rdev = dev->dev_private;
+
+	if (crtc < 0 || crtc > 1) {
+		DRM_ERROR("Invalid crtc %d\n", crtc);
+		return -EINVAL;
+	}
+
+	return radeon_get_vblank_counter(rdev, crtc);
 }
 
 int radeon_enable_vblank_kms(struct drm_device *dev, int crtc)
 {
-	/* FIXME: implement */
-	return 0;
+	struct radeon_device *rdev = dev->dev_private;
+
+	if (crtc < 0 || crtc > 1) {
+		DRM_ERROR("Invalid crtc %d\n", crtc);
+		return -EINVAL;
+	}
+
+	rdev->irq.crtc_vblank_int[crtc] = true;
+
+	return radeon_irq_set(rdev);
 }
 
 void radeon_disable_vblank_kms(struct drm_device *dev, int crtc)
 {
-	/* FIXME: implement */
+	struct radeon_device *rdev = dev->dev_private;
+
+	if (crtc < 0 || crtc > 1) {
+		DRM_ERROR("Invalid crtc %d\n", crtc);
+		return;
+	}
+
+	rdev->irq.crtc_vblank_int[crtc] = false;
+
+	radeon_irq_set(rdev);
 }
 
 
@@ -291,5 +319,8 @@ struct drm_ioctl_desc radeon_ioctls_kms[] = {
 	DRM_IOCTL_DEF(DRM_RADEON_GEM_WAIT_IDLE, radeon_gem_wait_idle_ioctl, DRM_AUTH),
 	DRM_IOCTL_DEF(DRM_RADEON_CS, radeon_cs_ioctl, DRM_AUTH),
 	DRM_IOCTL_DEF(DRM_RADEON_INFO, radeon_info_ioctl, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_GEM_SET_TILING, radeon_gem_set_tiling_ioctl, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_GEM_GET_TILING, radeon_gem_get_tiling_ioctl, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_GEM_BUSY, radeon_gem_busy_ioctl, DRM_AUTH),
 };
 int radeon_max_kms_ioctl = DRM_ARRAY_SIZE(radeon_ioctls_kms);
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
index 8086ecf7f03..0da72f18fd3 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
@@ -29,6 +29,171 @@
 #include "radeon_fixed.h"
 #include "radeon.h"
 
+static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc,
+				       struct drm_display_mode *mode,
+				       struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	int xres = mode->hdisplay;
+	int yres = mode->vdisplay;
+	bool hscale = true, vscale = true;
+	int hsync_wid;
+	int vsync_wid;
+	int hsync_start;
+	int blank_width;
+	u32 scale, inc, crtc_more_cntl;
+	u32 fp_horz_stretch, fp_vert_stretch, fp_horz_vert_active;
+	u32 fp_h_sync_strt_wid, fp_crtc_h_total_disp;
+	u32 fp_v_sync_strt_wid, fp_crtc_v_total_disp;
+	struct radeon_native_mode *native_mode = &radeon_crtc->native_mode;
+
+	fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) &
+		(RADEON_VERT_STRETCH_RESERVED |
+		 RADEON_VERT_AUTO_RATIO_INC);
+	fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH) &
+		(RADEON_HORZ_FP_LOOP_STRETCH |
+		 RADEON_HORZ_AUTO_RATIO_INC);
+
+	crtc_more_cntl = 0;
+	if ((rdev->family == CHIP_RS100) ||
+	    (rdev->family == CHIP_RS200)) {
+		/* This is to workaround the asic bug for RMX, some versions
+		   of BIOS dosen't have this register initialized correctly. */
+		crtc_more_cntl |= RADEON_CRTC_H_CUTOFF_ACTIVE_EN;
+	}
+
+
+	fp_crtc_h_total_disp = ((((mode->crtc_htotal / 8) - 1) & 0x3ff)
+				| ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
+
+	hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
+	if (!hsync_wid)
+		hsync_wid = 1;
+	hsync_start = mode->crtc_hsync_start - 8;
+
+	fp_h_sync_strt_wid = ((hsync_start & 0x1fff)
+			      | ((hsync_wid & 0x3f) << 16)
+			      | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
+				 ? RADEON_CRTC_H_SYNC_POL
+				 : 0));
+
+	fp_crtc_v_total_disp = (((mode->crtc_vtotal - 1) & 0xffff)
+				| ((mode->crtc_vdisplay - 1) << 16));
+
+	vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
+	if (!vsync_wid)
+		vsync_wid = 1;
+
+	fp_v_sync_strt_wid = (((mode->crtc_vsync_start - 1) & 0xfff)
+			      | ((vsync_wid & 0x1f) << 16)
+			      | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
+				 ? RADEON_CRTC_V_SYNC_POL
+				 : 0));
+
+	fp_horz_vert_active = 0;
+
+	if (native_mode->panel_xres == 0 ||
+	    native_mode->panel_yres == 0) {
+		hscale = false;
+		vscale = false;
+	} else {
+		if (xres > native_mode->panel_xres)
+			xres = native_mode->panel_xres;
+		if (yres > native_mode->panel_yres)
+			yres = native_mode->panel_yres;
+
+		if (xres == native_mode->panel_xres)
+			hscale = false;
+		if (yres == native_mode->panel_yres)
+			vscale = false;
+	}
+
+	switch (radeon_crtc->rmx_type) {
+	case RMX_FULL:
+	case RMX_ASPECT:
+		if (!hscale)
+			fp_horz_stretch |= ((xres/8-1) << 16);
+		else {
+			inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0;
+			scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX)
+				/ native_mode->panel_xres + 1;
+			fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) |
+					RADEON_HORZ_STRETCH_BLEND |
+					RADEON_HORZ_STRETCH_ENABLE |
+					((native_mode->panel_xres/8-1) << 16));
+		}
+
+		if (!vscale)
+			fp_vert_stretch |= ((yres-1) << 12);
+		else {
+			inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0;
+			scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX)
+				/ native_mode->panel_yres + 1;
+			fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) |
+					RADEON_VERT_STRETCH_ENABLE |
+					RADEON_VERT_STRETCH_BLEND |
+					((native_mode->panel_yres-1) << 12));
+		}
+		break;
+	case RMX_CENTER:
+		fp_horz_stretch |= ((xres/8-1) << 16);
+		fp_vert_stretch |= ((yres-1) << 12);
+
+		crtc_more_cntl |= (RADEON_CRTC_AUTO_HORZ_CENTER_EN |
+				RADEON_CRTC_AUTO_VERT_CENTER_EN);
+
+		blank_width = (mode->crtc_hblank_end - mode->crtc_hblank_start) / 8;
+		if (blank_width > 110)
+			blank_width = 110;
+
+		fp_crtc_h_total_disp = (((blank_width) & 0x3ff)
+				| ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
+
+		hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
+		if (!hsync_wid)
+			hsync_wid = 1;
+
+		fp_h_sync_strt_wid = ((((mode->crtc_hsync_start - mode->crtc_hblank_start) / 8) & 0x1fff)
+				| ((hsync_wid & 0x3f) << 16)
+				| ((mode->flags & DRM_MODE_FLAG_NHSYNC)
+					? RADEON_CRTC_H_SYNC_POL
+					: 0));
+
+		fp_crtc_v_total_disp = (((mode->crtc_vblank_end - mode->crtc_vblank_start) & 0xffff)
+				| ((mode->crtc_vdisplay - 1) << 16));
+
+		vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
+		if (!vsync_wid)
+			vsync_wid = 1;
+
+		fp_v_sync_strt_wid = ((((mode->crtc_vsync_start - mode->crtc_vblank_start) & 0xfff)
+					| ((vsync_wid & 0x1f) << 16)
+					| ((mode->flags & DRM_MODE_FLAG_NVSYNC)
+						? RADEON_CRTC_V_SYNC_POL
+						: 0)));
+
+		fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) |
+				(((native_mode->panel_xres / 8) & 0x1ff) << 16));
+		break;
+	case RMX_OFF:
+	default:
+		fp_horz_stretch |= ((xres/8-1) << 16);
+		fp_vert_stretch |= ((yres-1) << 12);
+		break;
+	}
+
+	WREG32(RADEON_FP_HORZ_STRETCH,      fp_horz_stretch);
+	WREG32(RADEON_FP_VERT_STRETCH,      fp_vert_stretch);
+	WREG32(RADEON_CRTC_MORE_CNTL,       crtc_more_cntl);
+	WREG32(RADEON_FP_HORZ_VERT_ACTIVE,  fp_horz_vert_active);
+	WREG32(RADEON_FP_H_SYNC_STRT_WID,   fp_h_sync_strt_wid);
+	WREG32(RADEON_FP_V_SYNC_STRT_WID,   fp_v_sync_strt_wid);
+	WREG32(RADEON_FP_CRTC_H_TOTAL_DISP, fp_crtc_h_total_disp);
+	WREG32(RADEON_FP_CRTC_V_TOTAL_DISP, fp_crtc_v_total_disp);
+}
+
 void radeon_restore_common_regs(struct drm_device *dev)
 {
 	/* don't need this yet */
@@ -145,10 +310,13 @@ void radeon_crtc_dpms(struct drm_crtc *crtc, int mode)
 									 RADEON_CRTC_DISP_REQ_EN_B));
 			WREG32_P(RADEON_CRTC_EXT_CNTL, 0, ~mask);
 		}
+		drm_vblank_post_modeset(dev, radeon_crtc->crtc_id);
+		radeon_crtc_load_lut(crtc);
 		break;
 	case DRM_MODE_DPMS_STANDBY:
 	case DRM_MODE_DPMS_SUSPEND:
 	case DRM_MODE_DPMS_OFF:
+		drm_vblank_pre_modeset(dev, radeon_crtc->crtc_id);
 		if (radeon_crtc->crtc_id)
 			WREG32_P(RADEON_CRTC2_GEN_CNTL, mask, ~mask);
 		else {
@@ -158,10 +326,6 @@ void radeon_crtc_dpms(struct drm_crtc *crtc, int mode)
 		}
 		break;
 	}
-
-	if (mode != DRM_MODE_DPMS_OFF) {
-		radeon_crtc_load_lut(crtc);
-	}
 }
 
 /* properly set crtc bpp when using atombios */
@@ -235,6 +399,7 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 	uint64_t base;
 	uint32_t crtc_offset, crtc_offset_cntl, crtc_tile_x0_y0 = 0;
 	uint32_t crtc_pitch, pitch_pixels;
+	uint32_t tiling_flags;
 
 	DRM_DEBUG("\n");
 
@@ -244,7 +409,12 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 	if (radeon_gem_object_pin(obj, RADEON_GEM_DOMAIN_VRAM, &base)) {
 		return -EINVAL;
 	}
-	crtc_offset = (u32)base;
+	/* if scanout was in GTT this really wouldn't work */
+	/* crtc offset is from display base addr not FB location */
+	radeon_crtc->legacy_display_base_addr = rdev->mc.vram_location;
+
+	base -= radeon_crtc->legacy_display_base_addr;
+
 	crtc_offset_cntl = 0;
 
 	pitch_pixels = crtc->fb->pitch / (crtc->fb->bits_per_pixel / 8);
@@ -253,8 +423,12 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 		       (crtc->fb->bits_per_pixel * 8));
 	crtc_pitch |= crtc_pitch << 16;
 
-	/* TODO tiling */
-	if (0) {
+	radeon_object_get_tiling_flags(obj->driver_private,
+				       &tiling_flags, NULL);
+	if (tiling_flags & RADEON_TILING_MICRO)
+		DRM_ERROR("trying to scanout microtiled buffer\n");
+
+	if (tiling_flags & RADEON_TILING_MACRO) {
 		if (ASIC_IS_R300(rdev))
 			crtc_offset_cntl |= (R300_CRTC_X_Y_MODE_EN |
 					     R300_CRTC_MICRO_TILE_BUFFER_DIS |
@@ -270,15 +444,13 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 			crtc_offset_cntl &= ~RADEON_CRTC_TILE_EN;
 	}
 
-
-	/* TODO more tiling */
-	if (0) {
+	if (tiling_flags & RADEON_TILING_MACRO) {
 		if (ASIC_IS_R300(rdev)) {
 			crtc_tile_x0_y0 = x | (y << 16);
 			base &= ~0x7ff;
 		} else {
 			int byteshift = crtc->fb->bits_per_pixel >> 4;
-			int tile_addr = (((y >> 3) * crtc->fb->width + x) >> (8 - byteshift)) << 11;
+			int tile_addr = (((y >> 3) * pitch_pixels +  x) >> (8 - byteshift)) << 11;
 			base += tile_addr + ((x << byteshift) % 256) + ((y % 8) << 8);
 			crtc_offset_cntl |= (y % 16);
 		}
@@ -303,11 +475,9 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 
 	base &= ~7;
 
-	/* update sarea TODO */
-
 	crtc_offset = (u32)base;
 
-	WREG32(RADEON_DISPLAY_BASE_ADDR + radeon_crtc->crtc_offset, rdev->mc.vram_location);
+	WREG32(RADEON_DISPLAY_BASE_ADDR + radeon_crtc->crtc_offset, radeon_crtc->legacy_display_base_addr);
 
 	if (ASIC_IS_R300(rdev)) {
 		if (radeon_crtc->crtc_id)
@@ -751,6 +921,8 @@ static bool radeon_crtc_mode_fixup(struct drm_crtc *crtc,
 				   struct drm_display_mode *mode,
 				   struct drm_display_mode *adjusted_mode)
 {
+	if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
+		return false;
 	return true;
 }
 
@@ -759,16 +931,25 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc,
 				 struct drm_display_mode *adjusted_mode,
 				 int x, int y, struct drm_framebuffer *old_fb)
 {
-
-	DRM_DEBUG("\n");
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
 
 	/* TODO TV */
-
 	radeon_crtc_set_base(crtc, x, y, old_fb);
 	radeon_set_crtc_timing(crtc, adjusted_mode);
 	radeon_set_pll(crtc, adjusted_mode);
-	radeon_init_disp_bandwidth(crtc->dev);
-
+	radeon_bandwidth_update(rdev);
+	if (radeon_crtc->crtc_id == 0) {
+		radeon_legacy_rmx_mode_set(crtc, mode, adjusted_mode);
+	} else {
+		if (radeon_crtc->rmx_type != RMX_OFF) {
+			/* FIXME: only first crtc has rmx what should we
+			 * do ?
+			 */
+			DRM_ERROR("Mode need scaling but only first crtc can do that.\n");
+		}
+	}
 	return 0;
 }
 
@@ -799,478 +980,3 @@ void radeon_legacy_init_crtc(struct drm_device *dev,
 		radeon_crtc->crtc_offset = RADEON_CRTC2_H_TOTAL_DISP - RADEON_CRTC_H_TOTAL_DISP;
 	drm_crtc_helper_add(&radeon_crtc->base, &legacy_helper_funcs);
 }
-
-void radeon_init_disp_bw_legacy(struct drm_device *dev,
-				struct drm_display_mode *mode1,
-				uint32_t pixel_bytes1,
-				struct drm_display_mode *mode2,
-				uint32_t pixel_bytes2)
-{
-	struct radeon_device *rdev = dev->dev_private;
-	fixed20_12 trcd_ff, trp_ff, tras_ff, trbs_ff, tcas_ff;
-	fixed20_12 sclk_ff, mclk_ff, sclk_eff_ff, sclk_delay_ff;
-	fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff;
-	uint32_t temp, data, mem_trcd, mem_trp, mem_tras;
-	fixed20_12 memtcas_ff[8] = {
-		fixed_init(1),
-		fixed_init(2),
-		fixed_init(3),
-		fixed_init(0),
-		fixed_init_half(1),
-		fixed_init_half(2),
-		fixed_init(0),
-	};
-	fixed20_12 memtcas_rs480_ff[8] = {
-		fixed_init(0),
-		fixed_init(1),
-		fixed_init(2),
-		fixed_init(3),
-		fixed_init(0),
-		fixed_init_half(1),
-		fixed_init_half(2),
-		fixed_init_half(3),
-	};
-	fixed20_12 memtcas2_ff[8] = {
-		fixed_init(0),
-		fixed_init(1),
-		fixed_init(2),
-		fixed_init(3),
-		fixed_init(4),
-		fixed_init(5),
-		fixed_init(6),
-		fixed_init(7),
-	};
-	fixed20_12 memtrbs[8] = {
-		fixed_init(1),
-		fixed_init_half(1),
-		fixed_init(2),
-		fixed_init_half(2),
-		fixed_init(3),
-		fixed_init_half(3),
-		fixed_init(4),
-		fixed_init_half(4)
-	};
-	fixed20_12 memtrbs_r4xx[8] = {
-		fixed_init(4),
-		fixed_init(5),
-		fixed_init(6),
-		fixed_init(7),
-		fixed_init(8),
-		fixed_init(9),
-		fixed_init(10),
-		fixed_init(11)
-	};
-	fixed20_12 min_mem_eff;
-	fixed20_12 mc_latency_sclk, mc_latency_mclk, k1;
-	fixed20_12 cur_latency_mclk, cur_latency_sclk;
-	fixed20_12 disp_latency, disp_latency_overhead, disp_drain_rate,
-		disp_drain_rate2, read_return_rate;
-	fixed20_12 time_disp1_drop_priority;
-	int c;
-	int cur_size = 16;       /* in octawords */
-	int critical_point = 0, critical_point2;
-/* 	uint32_t read_return_rate, time_disp1_drop_priority; */
-	int stop_req, max_stop_req;
-
-	min_mem_eff.full = rfixed_const_8(0);
-	/* get modes */
-	if ((rdev->disp_priority == 2) && ASIC_IS_R300(rdev)) {
-		uint32_t mc_init_misc_lat_timer = RREG32(R300_MC_INIT_MISC_LAT_TIMER);
-		mc_init_misc_lat_timer &= ~(R300_MC_DISP1R_INIT_LAT_MASK << R300_MC_DISP1R_INIT_LAT_SHIFT);
-		mc_init_misc_lat_timer &= ~(R300_MC_DISP0R_INIT_LAT_MASK << R300_MC_DISP0R_INIT_LAT_SHIFT);
-		/* check crtc enables */
-		if (mode2)
-			mc_init_misc_lat_timer |= (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
-		if (mode1)
-			mc_init_misc_lat_timer |= (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
-		WREG32(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer);
-	}
-
-	/*
-	 * determine is there is enough bw for current mode
-	 */
-	mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
-	temp_ff.full = rfixed_const(100);
-	mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
-	sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
-	sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
-
-	temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
-	temp_ff.full = rfixed_const(temp);
-	mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
-
-	pix_clk.full = 0;
-	pix_clk2.full = 0;
-	peak_disp_bw.full = 0;
-	if (mode1) {
-		temp_ff.full = rfixed_const(1000);
-		pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */
-		pix_clk.full = rfixed_div(pix_clk, temp_ff);
-		temp_ff.full = rfixed_const(pixel_bytes1);
-		peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
-	}
-	if (mode2) {
-		temp_ff.full = rfixed_const(1000);
-		pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */
-		pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
-		temp_ff.full = rfixed_const(pixel_bytes2);
-		peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
-	}
-
-	mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
-	if (peak_disp_bw.full >= mem_bw.full) {
-		DRM_ERROR("You may not have enough display bandwidth for current mode\n"
-			  "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
-	}
-
-	/*  Get values from the EXT_MEM_CNTL register...converting its contents. */
-	temp = RREG32(RADEON_MEM_TIMING_CNTL);
-	if ((rdev->family == CHIP_RV100) || (rdev->flags & RADEON_IS_IGP)) { /* RV100, M6, IGPs */
-		mem_trcd = ((temp >> 2) & 0x3) + 1;
-		mem_trp  = ((temp & 0x3)) + 1;
-		mem_tras = ((temp & 0x70) >> 4) + 1;
-	} else if (rdev->family == CHIP_R300 ||
-		   rdev->family == CHIP_R350) { /* r300, r350 */
-		mem_trcd = (temp & 0x7) + 1;
-		mem_trp = ((temp >> 8) & 0x7) + 1;
-		mem_tras = ((temp >> 11) & 0xf) + 4;
-	} else if (rdev->family == CHIP_RV350 ||
-		   rdev->family <= CHIP_RV380) {
-		/* rv3x0 */
-		mem_trcd = (temp & 0x7) + 3;
-		mem_trp = ((temp >> 8) & 0x7) + 3;
-		mem_tras = ((temp >> 11) & 0xf) + 6;
-	} else if (rdev->family == CHIP_R420 ||
-		   rdev->family == CHIP_R423 ||
-		   rdev->family == CHIP_RV410) {
-		/* r4xx */
-		mem_trcd = (temp & 0xf) + 3;
-		if (mem_trcd > 15)
-			mem_trcd = 15;
-		mem_trp = ((temp >> 8) & 0xf) + 3;
-		if (mem_trp > 15)
-			mem_trp = 15;
-		mem_tras = ((temp >> 12) & 0x1f) + 6;
-		if (mem_tras > 31)
-			mem_tras = 31;
-	} else { /* RV200, R200 */
-		mem_trcd = (temp & 0x7) + 1;
-		mem_trp = ((temp >> 8) & 0x7) + 1;
-		mem_tras = ((temp >> 12) & 0xf) + 4;
-	}
-	/* convert to FF */
-	trcd_ff.full = rfixed_const(mem_trcd);
-	trp_ff.full = rfixed_const(mem_trp);
-	tras_ff.full = rfixed_const(mem_tras);
-
-	/* Get values from the MEM_SDRAM_MODE_REG register...converting its */
-	temp = RREG32(RADEON_MEM_SDRAM_MODE_REG);
-	data = (temp & (7 << 20)) >> 20;
-	if ((rdev->family == CHIP_RV100) || rdev->flags & RADEON_IS_IGP) {
-		if (rdev->family == CHIP_RS480) /* don't think rs400 */
-			tcas_ff = memtcas_rs480_ff[data];
-		else
-			tcas_ff = memtcas_ff[data];
-	} else
-		tcas_ff = memtcas2_ff[data];
-
-	if (rdev->family == CHIP_RS400 ||
-	    rdev->family == CHIP_RS480) {
-		/* extra cas latency stored in bits 23-25 0-4 clocks */
-		data = (temp >> 23) & 0x7;
-		if (data < 5)
-			tcas_ff.full += rfixed_const(data);
-	}
-
-	if (ASIC_IS_R300(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
-		/* on the R300, Tcas is included in Trbs.
-		 */
-		temp = RREG32(RADEON_MEM_CNTL);
-		data = (R300_MEM_NUM_CHANNELS_MASK & temp);
-		if (data == 1) {
-			if (R300_MEM_USE_CD_CH_ONLY & temp) {
-				temp = RREG32(R300_MC_IND_INDEX);
-				temp &= ~R300_MC_IND_ADDR_MASK;
-				temp |= R300_MC_READ_CNTL_CD_mcind;
-				WREG32(R300_MC_IND_INDEX, temp);
-				temp = RREG32(R300_MC_IND_DATA);
-				data = (R300_MEM_RBS_POSITION_C_MASK & temp);
-			} else {
-				temp = RREG32(R300_MC_READ_CNTL_AB);
-				data = (R300_MEM_RBS_POSITION_A_MASK & temp);
-			}
-		} else {
-			temp = RREG32(R300_MC_READ_CNTL_AB);
-			data = (R300_MEM_RBS_POSITION_A_MASK & temp);
-		}
-		if (rdev->family == CHIP_RV410 ||
-		    rdev->family == CHIP_R420 ||
-		    rdev->family == CHIP_R423)
-			trbs_ff = memtrbs_r4xx[data];
-		else
-			trbs_ff = memtrbs[data];
-		tcas_ff.full += trbs_ff.full;
-	}
-
-	sclk_eff_ff.full = sclk_ff.full;
-
-	if (rdev->flags & RADEON_IS_AGP) {
-		fixed20_12 agpmode_ff;
-		agpmode_ff.full = rfixed_const(radeon_agpmode);
-		temp_ff.full = rfixed_const_666(16);
-		sclk_eff_ff.full -= rfixed_mul(agpmode_ff, temp_ff);
-	}
-	/* TODO PCIE lanes may affect this - agpmode == 16?? */
-
-	if (ASIC_IS_R300(rdev)) {
-		sclk_delay_ff.full = rfixed_const(250);
-	} else {
-		if ((rdev->family == CHIP_RV100) ||
-		    rdev->flags & RADEON_IS_IGP) {
-			if (rdev->mc.vram_is_ddr)
-				sclk_delay_ff.full = rfixed_const(41);
-			else
-				sclk_delay_ff.full = rfixed_const(33);
-		} else {
-			if (rdev->mc.vram_width == 128)
-				sclk_delay_ff.full = rfixed_const(57);
-			else
-				sclk_delay_ff.full = rfixed_const(41);
-		}
-	}
-
-	mc_latency_sclk.full = rfixed_div(sclk_delay_ff, sclk_eff_ff);
-
-	if (rdev->mc.vram_is_ddr) {
-		if (rdev->mc.vram_width == 32) {
-			k1.full = rfixed_const(40);
-			c  = 3;
-		} else {
-			k1.full = rfixed_const(20);
-			c  = 1;
-		}
-	} else {
-		k1.full = rfixed_const(40);
-		c  = 3;
-	}
-
-	temp_ff.full = rfixed_const(2);
-	mc_latency_mclk.full = rfixed_mul(trcd_ff, temp_ff);
-	temp_ff.full = rfixed_const(c);
-	mc_latency_mclk.full += rfixed_mul(tcas_ff, temp_ff);
-	temp_ff.full = rfixed_const(4);
-	mc_latency_mclk.full += rfixed_mul(tras_ff, temp_ff);
-	mc_latency_mclk.full += rfixed_mul(trp_ff, temp_ff);
-	mc_latency_mclk.full += k1.full;
-
-	mc_latency_mclk.full = rfixed_div(mc_latency_mclk, mclk_ff);
-	mc_latency_mclk.full += rfixed_div(temp_ff, sclk_eff_ff);
-
-	/*
-	  HW cursor time assuming worst case of full size colour cursor.
-	*/
-	temp_ff.full = rfixed_const((2 * (cur_size - (rdev->mc.vram_is_ddr + 1))));
-	temp_ff.full += trcd_ff.full;
-	if (temp_ff.full < tras_ff.full)
-		temp_ff.full = tras_ff.full;
-	cur_latency_mclk.full = rfixed_div(temp_ff, mclk_ff);
-
-	temp_ff.full = rfixed_const(cur_size);
-	cur_latency_sclk.full = rfixed_div(temp_ff, sclk_eff_ff);
-	/*
-	  Find the total latency for the display data.
-	*/
-	disp_latency_overhead.full = rfixed_const(80);
-	disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff);
-	mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full;
-	mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full;
-
-	if (mc_latency_mclk.full > mc_latency_sclk.full)
-		disp_latency.full = mc_latency_mclk.full;
-	else
-		disp_latency.full = mc_latency_sclk.full;
-
-	/* setup Max GRPH_STOP_REQ default value */
-	if (ASIC_IS_RV100(rdev))
-		max_stop_req = 0x5c;
-	else
-		max_stop_req = 0x7c;
-
-	if (mode1) {
-		/*  CRTC1
-		    Set GRPH_BUFFER_CNTL register using h/w defined optimal values.
-		    GRPH_STOP_REQ <= MIN[ 0x7C, (CRTC_H_DISP + 1) * (bit depth) / 0x10 ]
-		*/
-		stop_req = mode1->hdisplay * pixel_bytes1 / 16;
-
-		if (stop_req > max_stop_req)
-			stop_req = max_stop_req;
-
-		/*
-		  Find the drain rate of the display buffer.
-		*/
-		temp_ff.full = rfixed_const((16/pixel_bytes1));
-		disp_drain_rate.full = rfixed_div(pix_clk, temp_ff);
-
-		/*
-		  Find the critical point of the display buffer.
-		*/
-		crit_point_ff.full = rfixed_mul(disp_drain_rate, disp_latency);
-		crit_point_ff.full += rfixed_const_half(0);
-
-		critical_point = rfixed_trunc(crit_point_ff);
-
-		if (rdev->disp_priority == 2) {
-			critical_point = 0;
-		}
-
-		/*
-		  The critical point should never be above max_stop_req-4.  Setting
-		  GRPH_CRITICAL_CNTL = 0 will thus force high priority all the time.
-		*/
-		if (max_stop_req - critical_point < 4)
-			critical_point = 0;
-
-		if (critical_point == 0 && mode2 && rdev->family == CHIP_R300) {
-			/* some R300 cards have problem with this set to 0, when CRTC2 is enabled.*/
-			critical_point = 0x10;
-		}
-
-		temp = RREG32(RADEON_GRPH_BUFFER_CNTL);
-		temp &= ~(RADEON_GRPH_STOP_REQ_MASK);
-		temp |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
-		temp &= ~(RADEON_GRPH_START_REQ_MASK);
-		if ((rdev->family == CHIP_R350) &&
-		    (stop_req > 0x15)) {
-			stop_req -= 0x10;
-		}
-		temp |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
-		temp |= RADEON_GRPH_BUFFER_SIZE;
-		temp &= ~(RADEON_GRPH_CRITICAL_CNTL   |
-			  RADEON_GRPH_CRITICAL_AT_SOF |
-			  RADEON_GRPH_STOP_CNTL);
-		/*
-		  Write the result into the register.
-		*/
-		WREG32(RADEON_GRPH_BUFFER_CNTL, ((temp & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
-						       (critical_point << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
-
-#if 0
-		if ((rdev->family == CHIP_RS400) ||
-		    (rdev->family == CHIP_RS480)) {
-			/* attempt to program RS400 disp regs correctly ??? */
-			temp = RREG32(RS400_DISP1_REG_CNTL);
-			temp &= ~(RS400_DISP1_START_REQ_LEVEL_MASK |
-				  RS400_DISP1_STOP_REQ_LEVEL_MASK);
-			WREG32(RS400_DISP1_REQ_CNTL1, (temp |
-						       (critical_point << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
-						       (critical_point << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
-			temp = RREG32(RS400_DMIF_MEM_CNTL1);
-			temp &= ~(RS400_DISP1_CRITICAL_POINT_START_MASK |
-				  RS400_DISP1_CRITICAL_POINT_STOP_MASK);
-			WREG32(RS400_DMIF_MEM_CNTL1, (temp |
-						      (critical_point << RS400_DISP1_CRITICAL_POINT_START_SHIFT) |
-						      (critical_point << RS400_DISP1_CRITICAL_POINT_STOP_SHIFT)));
-		}
-#endif
-
-		DRM_DEBUG("GRPH_BUFFER_CNTL from to %x\n",
-			  /* 	  (unsigned int)info->SavedReg->grph_buffer_cntl, */
-			  (unsigned int)RREG32(RADEON_GRPH_BUFFER_CNTL));
-	}
-
-	if (mode2) {
-		u32 grph2_cntl;
-		stop_req = mode2->hdisplay * pixel_bytes2 / 16;
-
-		if (stop_req > max_stop_req)
-			stop_req = max_stop_req;
-
-		/*
-		  Find the drain rate of the display buffer.
-		*/
-		temp_ff.full = rfixed_const((16/pixel_bytes2));
-		disp_drain_rate2.full = rfixed_div(pix_clk2, temp_ff);
-
-		grph2_cntl = RREG32(RADEON_GRPH2_BUFFER_CNTL);
-		grph2_cntl &= ~(RADEON_GRPH_STOP_REQ_MASK);
-		grph2_cntl |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
-		grph2_cntl &= ~(RADEON_GRPH_START_REQ_MASK);
-		if ((rdev->family == CHIP_R350) &&
-		    (stop_req > 0x15)) {
-			stop_req -= 0x10;
-		}
-		grph2_cntl |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
-		grph2_cntl |= RADEON_GRPH_BUFFER_SIZE;
-		grph2_cntl &= ~(RADEON_GRPH_CRITICAL_CNTL   |
-			  RADEON_GRPH_CRITICAL_AT_SOF |
-			  RADEON_GRPH_STOP_CNTL);
-
-		if ((rdev->family == CHIP_RS100) ||
-		    (rdev->family == CHIP_RS200))
-			critical_point2 = 0;
-		else {
-			temp = (rdev->mc.vram_width * rdev->mc.vram_is_ddr + 1)/128;
-			temp_ff.full = rfixed_const(temp);
-			temp_ff.full = rfixed_mul(mclk_ff, temp_ff);
-			if (sclk_ff.full < temp_ff.full)
-				temp_ff.full = sclk_ff.full;
-
-			read_return_rate.full = temp_ff.full;
-
-			if (mode1) {
-				temp_ff.full = read_return_rate.full - disp_drain_rate.full;
-				time_disp1_drop_priority.full = rfixed_div(crit_point_ff, temp_ff);
-			} else {
-				time_disp1_drop_priority.full = 0;
-			}
-			crit_point_ff.full = disp_latency.full + time_disp1_drop_priority.full + disp_latency.full;
-			crit_point_ff.full = rfixed_mul(crit_point_ff, disp_drain_rate2);
-			crit_point_ff.full += rfixed_const_half(0);
-
-			critical_point2 = rfixed_trunc(crit_point_ff);
-
-			if (rdev->disp_priority == 2) {
-				critical_point2 = 0;
-			}
-
-			if (max_stop_req - critical_point2 < 4)
-				critical_point2 = 0;
-
-		}
-
-		if (critical_point2 == 0 && rdev->family == CHIP_R300) {
-			/* some R300 cards have problem with this set to 0 */
-			critical_point2 = 0x10;
-		}
-
-		WREG32(RADEON_GRPH2_BUFFER_CNTL, ((grph2_cntl & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
-						  (critical_point2 << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
-
-		if ((rdev->family == CHIP_RS400) ||
-		    (rdev->family == CHIP_RS480)) {
-#if 0
-			/* attempt to program RS400 disp2 regs correctly ??? */
-			temp = RREG32(RS400_DISP2_REQ_CNTL1);
-			temp &= ~(RS400_DISP2_START_REQ_LEVEL_MASK |
-				  RS400_DISP2_STOP_REQ_LEVEL_MASK);
-			WREG32(RS400_DISP2_REQ_CNTL1, (temp |
-						       (critical_point2 << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
-						       (critical_point2 << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
-			temp = RREG32(RS400_DISP2_REQ_CNTL2);
-			temp &= ~(RS400_DISP2_CRITICAL_POINT_START_MASK |
-				  RS400_DISP2_CRITICAL_POINT_STOP_MASK);
-			WREG32(RS400_DISP2_REQ_CNTL2, (temp |
-						       (critical_point2 << RS400_DISP2_CRITICAL_POINT_START_SHIFT) |
-						       (critical_point2 << RS400_DISP2_CRITICAL_POINT_STOP_SHIFT)));
-#endif
-			WREG32(RS400_DISP2_REQ_CNTL1, 0x105DC1CC);
-			WREG32(RS400_DISP2_REQ_CNTL2, 0x2749D000);
-			WREG32(RS400_DMIF_MEM_CNTL1,  0x29CA71DC);
-			WREG32(RS400_DISP1_REQ_CNTL1, 0x28FBC3AC);
-		}
-
-		DRM_DEBUG("GRPH2_BUFFER_CNTL from to %x\n",
-			  (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL));
-	}
-}
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 2c2f42de1d4..9322675ef6d 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -30,170 +30,6 @@
 #include "atom.h"
 
 
-static void radeon_legacy_rmx_mode_set(struct drm_encoder *encoder,
-				       struct drm_display_mode *mode,
-				       struct drm_display_mode *adjusted_mode)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	int    xres = mode->hdisplay;
-	int    yres = mode->vdisplay;
-	bool   hscale = true, vscale = true;
-	int    hsync_wid;
-	int    vsync_wid;
-	int    hsync_start;
-	uint32_t scale, inc;
-	uint32_t fp_horz_stretch, fp_vert_stretch, crtc_more_cntl, fp_horz_vert_active;
-	uint32_t fp_h_sync_strt_wid, fp_v_sync_strt_wid, fp_crtc_h_total_disp, fp_crtc_v_total_disp;
-	struct radeon_native_mode *native_mode = &radeon_encoder->native_mode;
-
-	DRM_DEBUG("\n");
-
-	fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) &
-		(RADEON_VERT_STRETCH_RESERVED |
-		 RADEON_VERT_AUTO_RATIO_INC);
-	fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH) &
-		(RADEON_HORZ_FP_LOOP_STRETCH |
-		 RADEON_HORZ_AUTO_RATIO_INC);
-
-	crtc_more_cntl = 0;
-	if ((rdev->family == CHIP_RS100) ||
-	    (rdev->family == CHIP_RS200)) {
-		/* This is to workaround the asic bug for RMX, some versions
-		   of BIOS dosen't have this register initialized correctly. */
-		crtc_more_cntl |= RADEON_CRTC_H_CUTOFF_ACTIVE_EN;
-	}
-
-
-	fp_crtc_h_total_disp = ((((mode->crtc_htotal / 8) - 1) & 0x3ff)
-				| ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
-
-	hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
-	if (!hsync_wid)
-		hsync_wid = 1;
-	hsync_start = mode->crtc_hsync_start - 8;
-
-	fp_h_sync_strt_wid = ((hsync_start & 0x1fff)
-			      | ((hsync_wid & 0x3f) << 16)
-			      | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
-				 ? RADEON_CRTC_H_SYNC_POL
-				 : 0));
-
-	fp_crtc_v_total_disp = (((mode->crtc_vtotal - 1) & 0xffff)
-				| ((mode->crtc_vdisplay - 1) << 16));
-
-	vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
-	if (!vsync_wid)
-		vsync_wid = 1;
-
-	fp_v_sync_strt_wid = (((mode->crtc_vsync_start - 1) & 0xfff)
-			      | ((vsync_wid & 0x1f) << 16)
-			      | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
-				 ? RADEON_CRTC_V_SYNC_POL
-				 : 0));
-
-	fp_horz_vert_active = 0;
-
-	if (native_mode->panel_xres == 0 ||
-	    native_mode->panel_yres == 0) {
-		hscale = false;
-		vscale = false;
-	} else {
-		if (xres > native_mode->panel_xres)
-			xres = native_mode->panel_xres;
-		if (yres > native_mode->panel_yres)
-			yres = native_mode->panel_yres;
-
-		if (xres == native_mode->panel_xres)
-			hscale = false;
-		if (yres == native_mode->panel_yres)
-			vscale = false;
-	}
-
-	if (radeon_encoder->flags & RADEON_USE_RMX) {
-		if (radeon_encoder->rmx_type != RMX_CENTER) {
-			if (!hscale)
-				fp_horz_stretch |= ((xres/8-1) << 16);
-			else {
-				inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0;
-				scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX)
-					/ native_mode->panel_xres + 1;
-				fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) |
-						    RADEON_HORZ_STRETCH_BLEND |
-						    RADEON_HORZ_STRETCH_ENABLE |
-						    ((native_mode->panel_xres/8-1) << 16));
-			}
-
-			if (!vscale)
-				fp_vert_stretch |= ((yres-1) << 12);
-			else {
-				inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0;
-				scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX)
-					/ native_mode->panel_yres + 1;
-				fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) |
-						    RADEON_VERT_STRETCH_ENABLE |
-						    RADEON_VERT_STRETCH_BLEND |
-						    ((native_mode->panel_yres-1) << 12));
-			}
-		} else if (radeon_encoder->rmx_type == RMX_CENTER) {
-			int    blank_width;
-
-			fp_horz_stretch |= ((xres/8-1) << 16);
-			fp_vert_stretch |= ((yres-1) << 12);
-
-			crtc_more_cntl |= (RADEON_CRTC_AUTO_HORZ_CENTER_EN |
-					   RADEON_CRTC_AUTO_VERT_CENTER_EN);
-
-			blank_width = (mode->crtc_hblank_end - mode->crtc_hblank_start) / 8;
-			if (blank_width > 110)
-				blank_width = 110;
-
-			fp_crtc_h_total_disp = (((blank_width) & 0x3ff)
-						| ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
-
-			hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
-			if (!hsync_wid)
-				hsync_wid = 1;
-
-			fp_h_sync_strt_wid = ((((mode->crtc_hsync_start - mode->crtc_hblank_start) / 8) & 0x1fff)
-					      | ((hsync_wid & 0x3f) << 16)
-					      | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
-						 ? RADEON_CRTC_H_SYNC_POL
-						 : 0));
-
-			fp_crtc_v_total_disp = (((mode->crtc_vblank_end - mode->crtc_vblank_start) & 0xffff)
-						| ((mode->crtc_vdisplay - 1) << 16));
-
-			vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
-			if (!vsync_wid)
-				vsync_wid = 1;
-
-			fp_v_sync_strt_wid = ((((mode->crtc_vsync_start - mode->crtc_vblank_start) & 0xfff)
-					       | ((vsync_wid & 0x1f) << 16)
-					       | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
-						  ? RADEON_CRTC_V_SYNC_POL
-						  : 0)));
-
-			fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) |
-					       (((native_mode->panel_xres / 8) & 0x1ff) << 16));
-		}
-	} else {
-		fp_horz_stretch |= ((xres/8-1) << 16);
-		fp_vert_stretch |= ((yres-1) << 12);
-	}
-
-	WREG32(RADEON_FP_HORZ_STRETCH,      fp_horz_stretch);
-	WREG32(RADEON_FP_VERT_STRETCH,      fp_vert_stretch);
-	WREG32(RADEON_CRTC_MORE_CNTL,       crtc_more_cntl);
-	WREG32(RADEON_FP_HORZ_VERT_ACTIVE,  fp_horz_vert_active);
-	WREG32(RADEON_FP_H_SYNC_STRT_WID,   fp_h_sync_strt_wid);
-	WREG32(RADEON_FP_V_SYNC_STRT_WID,   fp_v_sync_strt_wid);
-	WREG32(RADEON_FP_CRTC_H_TOTAL_DISP, fp_crtc_h_total_disp);
-	WREG32(RADEON_FP_CRTC_V_TOTAL_DISP, fp_crtc_v_total_disp);
-
-}
-
 static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_device *dev = encoder->dev;
@@ -287,9 +123,6 @@ static void radeon_legacy_lvds_mode_set(struct drm_encoder *encoder,
 
 	DRM_DEBUG("\n");
 
-	if (radeon_crtc->crtc_id == 0)
-		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
 	lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL);
 	lvds_pll_cntl &= ~RADEON_LVDS_PLL_EN;
 
@@ -318,7 +151,7 @@ static void radeon_legacy_lvds_mode_set(struct drm_encoder *encoder,
 
 	if (radeon_crtc->crtc_id == 0) {
 		if (ASIC_IS_R300(rdev)) {
-			if (radeon_encoder->flags & RADEON_USE_RMX)
+			if (radeon_encoder->rmx_type != RMX_OFF)
 				lvds_pll_cntl |= R300_LVDS_SRC_SEL_RMX;
 		} else
 			lvds_gen_cntl &= ~RADEON_LVDS_SEL_CRTC2;
@@ -350,8 +183,6 @@ static bool radeon_legacy_lvds_mode_fixup(struct drm_encoder *encoder,
 
 	drm_mode_set_crtcinfo(adjusted_mode, 0);
 
-	radeon_encoder->flags &= ~RADEON_USE_RMX;
-
 	if (radeon_encoder->rmx_type != RMX_OFF)
 		radeon_rmx_mode_fixup(encoder, mode, adjusted_mode);
 
@@ -455,9 +286,6 @@ static void radeon_legacy_primary_dac_mode_set(struct drm_encoder *encoder,
 
 	DRM_DEBUG("\n");
 
-	if (radeon_crtc->crtc_id == 0)
-		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
 	if (radeon_crtc->crtc_id == 0) {
 		if (rdev->family == CHIP_R200 || ASIC_IS_R300(rdev)) {
 			disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL) &
@@ -653,9 +481,6 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder,
 
 	DRM_DEBUG("\n");
 
-	if (radeon_crtc->crtc_id == 0)
-		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
 	tmp = tmds_pll_cntl = RREG32(RADEON_TMDS_PLL_CNTL);
 	tmp &= 0xfffff;
 	if (rdev->family == CHIP_RV280) {
@@ -711,7 +536,7 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder,
     if (radeon_crtc->crtc_id == 0) {
 	    if (ASIC_IS_R300(rdev) || rdev->family == CHIP_R200) {
 		    fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK;
-		    if (radeon_encoder->flags & RADEON_USE_RMX)
+		    if (radeon_encoder->rmx_type != RMX_OFF)
 			    fp_gen_cntl |= R200_FP_SOURCE_SEL_RMX;
 		    else
 			    fp_gen_cntl |= R200_FP_SOURCE_SEL_CRTC1;
@@ -820,9 +645,6 @@ static void radeon_legacy_tmds_ext_mode_set(struct drm_encoder *encoder,
 
 	DRM_DEBUG("\n");
 
-	if (radeon_crtc->crtc_id == 0)
-		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
 	if (rdev->is_atom_bios) {
 		radeon_encoder->pixel_clock = adjusted_mode->clock;
 		atombios_external_tmds_setup(encoder, ATOM_ENABLE);
@@ -856,7 +678,7 @@ static void radeon_legacy_tmds_ext_mode_set(struct drm_encoder *encoder,
 	if (radeon_crtc->crtc_id == 0) {
 		if ((rdev->family == CHIP_R200) || ASIC_IS_R300(rdev)) {
 			fp2_gen_cntl &= ~R200_FP2_SOURCE_SEL_MASK;
-			if (radeon_encoder->flags & RADEON_USE_RMX)
+			if (radeon_encoder->rmx_type != RMX_OFF)
 				fp2_gen_cntl |= R200_FP2_SOURCE_SEL_RMX;
 			else
 				fp2_gen_cntl |= R200_FP2_SOURCE_SEL_CRTC1;
@@ -1014,9 +836,6 @@ static void radeon_legacy_tv_dac_mode_set(struct drm_encoder *encoder,
 
 	DRM_DEBUG("\n");
 
-	if (radeon_crtc->crtc_id == 0)
-		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
 	if (rdev->family != CHIP_R200) {
 		tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL);
 		if (rdev->family == CHIP_R420 ||
@@ -1243,9 +1062,11 @@ radeon_add_legacy_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t
 
 	radeon_encoder->encoder_id = encoder_id;
 	radeon_encoder->devices = supported_device;
+	radeon_encoder->rmx_type = RMX_OFF;
 
 	switch (radeon_encoder->encoder_id) {
 	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+		encoder->possible_crtcs = 0x1;
 		drm_encoder_init(dev, encoder, &radeon_legacy_lvds_enc_funcs, DRM_MODE_ENCODER_LVDS);
 		drm_encoder_helper_add(encoder, &radeon_legacy_lvds_helper_funcs);
 		if (rdev->is_atom_bios)
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 9173b687462..3b09a1f2d8f 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -36,6 +36,9 @@
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
 #include <linux/i2c-algo-bit.h>
+#include "radeon_fixed.h"
+
+struct radeon_device;
 
 #define to_radeon_crtc(x) container_of(x, struct radeon_crtc, base)
 #define to_radeon_connector(x) container_of(x, struct radeon_connector, base)
@@ -124,6 +127,7 @@ struct radeon_tmds_pll {
 #define RADEON_PLL_PREFER_LOW_POST_DIV  (1 << 8)
 #define RADEON_PLL_PREFER_HIGH_POST_DIV (1 << 9)
 #define RADEON_PLL_USE_FRAC_FB_DIV      (1 << 10)
+#define RADEON_PLL_PREFER_CLOSEST_LOWER (1 << 11)
 
 struct radeon_pll {
 	uint16_t reference_freq;
@@ -170,6 +174,18 @@ struct radeon_mode_info {
 	struct atom_context *atom_context;
 	enum radeon_connector_table connector_table;
 	bool mode_config_initialized;
+	struct radeon_crtc *crtcs[2];
+};
+
+struct radeon_native_mode {
+	/* preferred mode */
+	uint32_t panel_xres, panel_yres;
+	uint32_t hoverplus, hsync_width;
+	uint32_t hblank;
+	uint32_t voverplus, vsync_width;
+	uint32_t vblank;
+	uint32_t dotclock;
+	uint32_t flags;
 };
 
 struct radeon_crtc {
@@ -185,19 +201,13 @@ struct radeon_crtc {
 	uint64_t cursor_addr;
 	int cursor_width;
 	int cursor_height;
-};
-
-#define RADEON_USE_RMX 1
-
-struct radeon_native_mode {
-	/* preferred mode */
-	uint32_t panel_xres, panel_yres;
-	uint32_t hoverplus, hsync_width;
-	uint32_t hblank;
-	uint32_t voverplus, vsync_width;
-	uint32_t vblank;
-	uint32_t dotclock;
-	uint32_t flags;
+	uint32_t legacy_display_base_addr;
+	uint32_t legacy_cursor_offset;
+	enum radeon_rmx_type rmx_type;
+	uint32_t devices;
+	fixed20_12 vsc;
+	fixed20_12 hsc;
+	struct radeon_native_mode native_mode;
 };
 
 struct radeon_encoder_primary_dac {
@@ -383,16 +393,9 @@ void radeon_enc_destroy(struct drm_encoder *encoder);
 void radeon_copy_fb(struct drm_device *dev, struct drm_gem_object *dst_obj);
 void radeon_combios_asic_init(struct drm_device *dev);
 extern int radeon_static_clocks_init(struct drm_device *dev);
-void radeon_init_disp_bw_legacy(struct drm_device *dev,
-				struct drm_display_mode *mode1,
-				uint32_t pixel_bytes1,
-				struct drm_display_mode *mode2,
-				uint32_t pixel_bytes2);
-void radeon_init_disp_bw_avivo(struct drm_device *dev,
-			       struct drm_display_mode *mode1,
-			       uint32_t pixel_bytes1,
-			       struct drm_display_mode *mode2,
-			       uint32_t pixel_bytes2);
-void radeon_init_disp_bandwidth(struct drm_device *dev);
+bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
+					struct drm_display_mode *mode,
+					struct drm_display_mode *adjusted_mode);
+void atom_rv515_force_tv_scaler(struct radeon_device *rdev);
 
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 983e8df5e00..b85fb83d7ae 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -44,6 +44,9 @@ struct radeon_object {
 	uint64_t			gpu_addr;
 	void				*kptr;
 	bool				is_iomem;
+	uint32_t			tiling_flags;
+	uint32_t			pitch;
+	int				surface_reg;
 };
 
 int radeon_ttm_init(struct radeon_device *rdev);
@@ -70,6 +73,7 @@ static void radeon_ttm_object_object_destroy(struct ttm_buffer_object *tobj)
 
 	robj = container_of(tobj, struct radeon_object, tobj);
 	list_del_init(&robj->list);
+	radeon_object_clear_surface_reg(robj);
 	kfree(robj);
 }
 
@@ -99,16 +103,16 @@ static inline uint32_t radeon_object_flags_from_domain(uint32_t domain)
 {
 	uint32_t flags = 0;
 	if (domain & RADEON_GEM_DOMAIN_VRAM) {
-		flags |= TTM_PL_FLAG_VRAM;
+		flags |= TTM_PL_FLAG_VRAM | TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED;
 	}
 	if (domain & RADEON_GEM_DOMAIN_GTT) {
-		flags |= TTM_PL_FLAG_TT;
+		flags |= TTM_PL_FLAG_TT | TTM_PL_MASK_CACHING;
 	}
 	if (domain & RADEON_GEM_DOMAIN_CPU) {
-		flags |= TTM_PL_FLAG_SYSTEM;
+		flags |= TTM_PL_FLAG_SYSTEM | TTM_PL_MASK_CACHING;
 	}
 	if (!flags) {
-		flags |= TTM_PL_FLAG_SYSTEM;
+		flags |= TTM_PL_FLAG_SYSTEM | TTM_PL_MASK_CACHING;
 	}
 	return flags;
 }
@@ -141,6 +145,7 @@ int radeon_object_create(struct radeon_device *rdev,
 	}
 	robj->rdev = rdev;
 	robj->gobj = gobj;
+	robj->surface_reg = -1;
 	INIT_LIST_HEAD(&robj->list);
 
 	flags = radeon_object_flags_from_domain(domain);
@@ -223,7 +228,6 @@ int radeon_object_pin(struct radeon_object *robj, uint32_t domain,
 {
 	uint32_t flags;
 	uint32_t tmp;
-	void *fbptr;
 	int r;
 
 	flags = radeon_object_flags_from_domain(domain);
@@ -242,10 +246,6 @@ int radeon_object_pin(struct radeon_object *robj, uint32_t domain,
 		DRM_ERROR("radeon: failed to reserve object for pinning it.\n");
 		return r;
 	}
-	if (robj->rdev->fbdev_robj == robj) {
-		mutex_lock(&robj->rdev->fbdev_info->lock);
-		radeon_object_kunmap(robj);
-	}
 	tmp = robj->tobj.mem.placement;
 	ttm_flag_masked(&tmp, flags, TTM_PL_MASK_MEM);
 	robj->tobj.proposed_placement = tmp | TTM_PL_FLAG_NO_EVICT | TTM_PL_MASK_CACHING;
@@ -261,23 +261,12 @@ int radeon_object_pin(struct radeon_object *robj, uint32_t domain,
 		DRM_ERROR("radeon: failed to pin object.\n");
 	}
 	radeon_object_unreserve(robj);
-	if (robj->rdev->fbdev_robj == robj) {
-		if (!r) {
-			r = radeon_object_kmap(robj, &fbptr);
-		}
-		if (!r) {
-			robj->rdev->fbdev_info->screen_base = fbptr;
-			robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr;
-		}
-		mutex_unlock(&robj->rdev->fbdev_info->lock);
-	}
 	return r;
 }
 
 void radeon_object_unpin(struct radeon_object *robj)
 {
 	uint32_t flags;
-	void *fbptr;
 	int r;
 
 	spin_lock(&robj->tobj.lock);
@@ -297,10 +286,6 @@ void radeon_object_unpin(struct radeon_object *robj)
 		DRM_ERROR("radeon: failed to reserve object for unpinning it.\n");
 		return;
 	}
-	if (robj->rdev->fbdev_robj == robj) {
-		mutex_lock(&robj->rdev->fbdev_info->lock);
-		radeon_object_kunmap(robj);
-	}
 	flags = robj->tobj.mem.placement;
 	robj->tobj.proposed_placement = flags & ~TTM_PL_FLAG_NO_EVICT;
 	r = ttm_buffer_object_validate(&robj->tobj,
@@ -310,16 +295,6 @@ void radeon_object_unpin(struct radeon_object *robj)
 		DRM_ERROR("radeon: failed to unpin buffer.\n");
 	}
 	radeon_object_unreserve(robj);
-	if (robj->rdev->fbdev_robj == robj) {
-		if (!r) {
-			r = radeon_object_kmap(robj, &fbptr);
-		}
-		if (!r) {
-			robj->rdev->fbdev_info->screen_base = fbptr;
-			robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr;
-		}
-		mutex_unlock(&robj->rdev->fbdev_info->lock);
-	}
 }
 
 int radeon_object_wait(struct radeon_object *robj)
@@ -334,7 +309,26 @@ int radeon_object_wait(struct radeon_object *robj)
 	}
 	spin_lock(&robj->tobj.lock);
 	if (robj->tobj.sync_obj) {
-		r = ttm_bo_wait(&robj->tobj, true, false, false);
+		r = ttm_bo_wait(&robj->tobj, true, true, false);
+	}
+	spin_unlock(&robj->tobj.lock);
+	radeon_object_unreserve(robj);
+	return r;
+}
+
+int radeon_object_busy_domain(struct radeon_object *robj, uint32_t *cur_placement)
+{
+	int r = 0;
+
+	r = radeon_object_reserve(robj, true);
+	if (unlikely(r != 0)) {
+		DRM_ERROR("radeon: failed to reserve object for waiting.\n");
+		return r;
+	}
+	spin_lock(&robj->tobj.lock);
+	*cur_placement = robj->tobj.mem.mem_type;
+	if (robj->tobj.sync_obj) {
+		r = ttm_bo_wait(&robj->tobj, true, true, true);
 	}
 	spin_unlock(&robj->tobj.lock);
 	radeon_object_unreserve(robj);
@@ -433,7 +427,6 @@ int radeon_object_list_validate(struct list_head *head, void *fence)
 	struct radeon_object *robj;
 	struct radeon_fence *old_fence = NULL;
 	struct list_head *i;
-	uint32_t flags;
 	int r;
 
 	r = radeon_object_list_reserve(head);
@@ -444,27 +437,25 @@ int radeon_object_list_validate(struct list_head *head, void *fence)
 	list_for_each(i, head) {
 		lobj = list_entry(i, struct radeon_object_list, list);
 		robj = lobj->robj;
-		if (lobj->wdomain) {
-			flags = radeon_object_flags_from_domain(lobj->wdomain);
-			flags |= TTM_PL_FLAG_TT;
-		} else {
-			flags = radeon_object_flags_from_domain(lobj->rdomain);
-			flags |= TTM_PL_FLAG_TT;
-			flags |= TTM_PL_FLAG_VRAM;
-		}
 		if (!robj->pin_count) {
-			robj->tobj.proposed_placement = flags | TTM_PL_MASK_CACHING;
+			if (lobj->wdomain) {
+				robj->tobj.proposed_placement =
+					radeon_object_flags_from_domain(lobj->wdomain);
+			} else {
+				robj->tobj.proposed_placement =
+					radeon_object_flags_from_domain(lobj->rdomain);
+			}
 			r = ttm_buffer_object_validate(&robj->tobj,
 						       robj->tobj.proposed_placement,
 						       true, false);
 			if (unlikely(r)) {
-				radeon_object_list_unreserve(head);
 				DRM_ERROR("radeon: failed to validate.\n");
 				return r;
 			}
 			radeon_object_gpu_addr(robj);
 		}
 		lobj->gpu_offset = robj->gpu_addr;
+		lobj->tiling_flags = robj->tiling_flags;
 		if (fence) {
 			old_fence = (struct radeon_fence *)robj->tobj.sync_obj;
 			robj->tobj.sync_obj = radeon_fence_ref(fence);
@@ -509,3 +500,127 @@ unsigned long radeon_object_size(struct radeon_object *robj)
 {
 	return robj->tobj.num_pages << PAGE_SHIFT;
 }
+
+int radeon_object_get_surface_reg(struct radeon_object *robj)
+{
+	struct radeon_device *rdev = robj->rdev;
+	struct radeon_surface_reg *reg;
+	struct radeon_object *old_object;
+	int steal;
+	int i;
+
+	if (!robj->tiling_flags)
+		return 0;
+
+	if (robj->surface_reg >= 0) {
+		reg = &rdev->surface_regs[robj->surface_reg];
+		i = robj->surface_reg;
+		goto out;
+	}
+
+	steal = -1;
+	for (i = 0; i < RADEON_GEM_MAX_SURFACES; i++) {
+
+		reg = &rdev->surface_regs[i];
+		if (!reg->robj)
+			break;
+
+		old_object = reg->robj;
+		if (old_object->pin_count == 0)
+			steal = i;
+	}
+
+	/* if we are all out */
+	if (i == RADEON_GEM_MAX_SURFACES) {
+		if (steal == -1)
+			return -ENOMEM;
+		/* find someone with a surface reg and nuke their BO */
+		reg = &rdev->surface_regs[steal];
+		old_object = reg->robj;
+		/* blow away the mapping */
+		DRM_DEBUG("stealing surface reg %d from %p\n", steal, old_object);
+		ttm_bo_unmap_virtual(&old_object->tobj);
+		old_object->surface_reg = -1;
+		i = steal;
+	}
+
+	robj->surface_reg = i;
+	reg->robj = robj;
+
+out:
+	radeon_set_surface_reg(rdev, i, robj->tiling_flags, robj->pitch,
+			       robj->tobj.mem.mm_node->start << PAGE_SHIFT,
+			       robj->tobj.num_pages << PAGE_SHIFT);
+	return 0;
+}
+
+void radeon_object_clear_surface_reg(struct radeon_object *robj)
+{
+	struct radeon_device *rdev = robj->rdev;
+	struct radeon_surface_reg *reg;
+
+	if (robj->surface_reg == -1)
+		return;
+
+	reg = &rdev->surface_regs[robj->surface_reg];
+	radeon_clear_surface_reg(rdev, robj->surface_reg);
+
+	reg->robj = NULL;
+	robj->surface_reg = -1;
+}
+
+void radeon_object_set_tiling_flags(struct radeon_object *robj,
+				    uint32_t tiling_flags, uint32_t pitch)
+{
+	robj->tiling_flags = tiling_flags;
+	robj->pitch = pitch;
+}
+
+void radeon_object_get_tiling_flags(struct radeon_object *robj,
+				    uint32_t *tiling_flags,
+				    uint32_t *pitch)
+{
+	if (tiling_flags)
+		*tiling_flags = robj->tiling_flags;
+	if (pitch)
+		*pitch = robj->pitch;
+}
+
+int radeon_object_check_tiling(struct radeon_object *robj, bool has_moved,
+			       bool force_drop)
+{
+	if (!(robj->tiling_flags & RADEON_TILING_SURFACE))
+		return 0;
+
+	if (force_drop) {
+		radeon_object_clear_surface_reg(robj);
+		return 0;
+	}
+
+	if (robj->tobj.mem.mem_type != TTM_PL_VRAM) {
+		if (!has_moved)
+			return 0;
+
+		if (robj->surface_reg >= 0)
+			radeon_object_clear_surface_reg(robj);
+		return 0;
+	}
+
+	if ((robj->surface_reg >= 0) && !has_moved)
+		return 0;
+
+	return radeon_object_get_surface_reg(robj);
+}
+
+void radeon_bo_move_notify(struct ttm_buffer_object *bo,
+			  struct ttm_mem_reg *mem)
+{
+	struct radeon_object *robj = container_of(bo, struct radeon_object, tobj);
+	radeon_object_check_tiling(robj, 0, 1);
+}
+
+void radeon_bo_fault_reserve_notify(struct ttm_buffer_object *bo)
+{
+	struct radeon_object *robj = container_of(bo, struct radeon_object, tobj);
+	radeon_object_check_tiling(robj, 0, 0);
+}
diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h
index e1b61857446..4df43f62c67 100644
--- a/drivers/gpu/drm/radeon/radeon_reg.h
+++ b/drivers/gpu/drm/radeon/radeon_reg.h
@@ -982,12 +982,15 @@
 #       define RS400_TMDS2_PLLRST           (1 << 1)
 
 #define RADEON_GEN_INT_CNTL                 0x0040
+#	define RADEON_CRTC_VBLANK_MASK		(1 << 0)
+#	define RADEON_CRTC2_VBLANK_MASK		(1 << 9)
 #	define RADEON_SW_INT_ENABLE		(1 << 25)
 #define RADEON_GEN_INT_STATUS               0x0044
-#       define RADEON_VSYNC_INT_AK          (1 <<  2)
-#       define RADEON_VSYNC_INT             (1 <<  2)
-#       define RADEON_VSYNC2_INT_AK         (1 <<  6)
-#       define RADEON_VSYNC2_INT            (1 <<  6)
+#	define AVIVO_DISPLAY_INT_STATUS		(1 << 0)
+#	define RADEON_CRTC_VBLANK_STAT		(1 << 0)
+#	define RADEON_CRTC_VBLANK_STAT_ACK	(1 << 0)
+#	define RADEON_CRTC2_VBLANK_STAT		(1 << 9)
+#	define RADEON_CRTC2_VBLANK_STAT_ACK	(1 << 9)
 #	define RADEON_SW_INT_FIRE		(1 << 26)
 #	define RADEON_SW_INT_TEST		(1 << 25)
 #	define RADEON_SW_INT_TEST_ACK		(1 << 25)
@@ -2334,6 +2337,9 @@
 #       define RADEON_RE_WIDTH_SHIFT        0
 #       define RADEON_RE_HEIGHT_SHIFT       16
 
+#define RADEON_RB3D_ZPASS_DATA 0x3290
+#define RADEON_RB3D_ZPASS_ADDR 0x3294
+
 #define RADEON_SE_CNTL                      0x1c4c
 #       define RADEON_FFACE_CULL_CW          (0 <<  0)
 #       define RADEON_FFACE_CULL_CCW         (1 <<  0)
@@ -3568,4 +3574,6 @@
 #define RADEON_SCRATCH_REG4		0x15f0
 #define RADEON_SCRATCH_REG5		0x15f4
 
+#define RV530_GB_PIPE_SELECT2           0x4124
+
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index a853261d188..60d159308b8 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -126,32 +126,19 @@ static void radeon_ib_align(struct radeon_device *rdev, struct radeon_ib *ib)
 	}
 }
 
-static void radeon_ib_cpu_flush(struct radeon_device *rdev,
-				struct radeon_ib *ib)
-{
-	unsigned long tmp;
-	unsigned i;
-
-	/* To force CPU cache flush ugly but seems reliable */
-	for (i = 0; i < ib->length_dw; i += (rdev->cp.align_mask + 1)) {
-		tmp = readl(&ib->ptr[i]);
-	}
-}
-
 int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib)
 {
 	int r = 0;
 
 	mutex_lock(&rdev->ib_pool.mutex);
 	radeon_ib_align(rdev, ib);
-	radeon_ib_cpu_flush(rdev, ib);
 	if (!ib->length_dw || !rdev->cp.ready) {
 		/* TODO: Nothings in the ib we should report. */
 		mutex_unlock(&rdev->ib_pool.mutex);
 		DRM_ERROR("radeon: couldn't schedule IB(%lu).\n", ib->idx);
 		return -EINVAL;
 	}
-	/* 64 dwords should be enought for fence too */
+	/* 64 dwords should be enough for fence too */
 	r = radeon_ring_lock(rdev, 64);
 	if (r) {
 		DRM_ERROR("radeon: scheduling IB failled (%d).\n", r);
diff --git a/drivers/gpu/drm/radeon/radeon_share.h b/drivers/gpu/drm/radeon/radeon_share.h
new file mode 100644
index 00000000000..63a773578f1
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_share.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __RADEON_SHARE_H__
+#define __RADEON_SHARE_H__
+
+void r100_vram_init_sizes(struct radeon_device *rdev);
+
+void rs690_line_buffer_adjust(struct radeon_device *rdev,
+			      struct drm_display_mode *mode1,
+			      struct drm_display_mode *mode2);
+
+void rv515_bandwidth_avivo_update(struct radeon_device *rdev);
+
+#endif
diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c
index 46645f3e032..2882f40d5ec 100644
--- a/drivers/gpu/drm/radeon/radeon_state.c
+++ b/drivers/gpu/drm/radeon/radeon_state.c
@@ -3081,6 +3081,9 @@ static int radeon_cp_getparam(struct drm_device *dev, void *data, struct drm_fil
 	case RADEON_PARAM_NUM_GB_PIPES:
 		value = dev_priv->num_gb_pipes;
 		break;
+	case RADEON_PARAM_NUM_Z_PIPES:
+		value = dev_priv->num_z_pipes;
+		break;
 	default:
 		DRM_DEBUG("Invalid parameter %d\n", param->param);
 		return -EINVAL;
diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c
new file mode 100644
index 00000000000..03c33cf4e14
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_test.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2009 VMware, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Michel Dänzer
+ */
+#include <drm/drmP.h>
+#include <drm/radeon_drm.h>
+#include "radeon_reg.h"
+#include "radeon.h"
+
+
+/* Test BO GTT->VRAM and VRAM->GTT GPU copies across the whole GTT aperture */
+void radeon_test_moves(struct radeon_device *rdev)
+{
+	struct radeon_object *vram_obj = NULL;
+	struct radeon_object **gtt_obj = NULL;
+	struct radeon_fence *fence = NULL;
+	uint64_t gtt_addr, vram_addr;
+	unsigned i, n, size;
+	int r;
+
+	size = 1024 * 1024;
+
+	/* Number of tests =
+	 * (Total GTT - IB pool - writeback page - ring buffer) / test size
+	 */
+	n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - 4096 -
+	     rdev->cp.ring_size) / size;
+
+	gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL);
+	if (!gtt_obj) {
+		DRM_ERROR("Failed to allocate %d pointers\n", n);
+		r = 1;
+		goto out_cleanup;
+	}
+
+	r = radeon_object_create(rdev, NULL, size, true, RADEON_GEM_DOMAIN_VRAM,
+				 false, &vram_obj);
+	if (r) {
+		DRM_ERROR("Failed to create VRAM object\n");
+		goto out_cleanup;
+	}
+
+	r = radeon_object_pin(vram_obj, RADEON_GEM_DOMAIN_VRAM, &vram_addr);
+	if (r) {
+		DRM_ERROR("Failed to pin VRAM object\n");
+		goto out_cleanup;
+	}
+
+	for (i = 0; i < n; i++) {
+		void *gtt_map, *vram_map;
+		void **gtt_start, **gtt_end;
+		void **vram_start, **vram_end;
+
+		r = radeon_object_create(rdev, NULL, size, true,
+					 RADEON_GEM_DOMAIN_GTT, false, gtt_obj + i);
+		if (r) {
+			DRM_ERROR("Failed to create GTT object %d\n", i);
+			goto out_cleanup;
+		}
+
+		r = radeon_object_pin(gtt_obj[i], RADEON_GEM_DOMAIN_GTT, &gtt_addr);
+		if (r) {
+			DRM_ERROR("Failed to pin GTT object %d\n", i);
+			goto out_cleanup;
+		}
+
+		r = radeon_object_kmap(gtt_obj[i], &gtt_map);
+		if (r) {
+			DRM_ERROR("Failed to map GTT object %d\n", i);
+			goto out_cleanup;
+		}
+
+		for (gtt_start = gtt_map, gtt_end = gtt_map + size;
+		     gtt_start < gtt_end;
+		     gtt_start++)
+			*gtt_start = gtt_start;
+
+		radeon_object_kunmap(gtt_obj[i]);
+
+		r = radeon_fence_create(rdev, &fence);
+		if (r) {
+			DRM_ERROR("Failed to create GTT->VRAM fence %d\n", i);
+			goto out_cleanup;
+		}
+
+		r = radeon_copy(rdev, gtt_addr, vram_addr, size / 4096, fence);
+		if (r) {
+			DRM_ERROR("Failed GTT->VRAM copy %d\n", i);
+			goto out_cleanup;
+		}
+
+		r = radeon_fence_wait(fence, false);
+		if (r) {
+			DRM_ERROR("Failed to wait for GTT->VRAM fence %d\n", i);
+			goto out_cleanup;
+		}
+
+		radeon_fence_unref(&fence);
+
+		r = radeon_object_kmap(vram_obj, &vram_map);
+		if (r) {
+			DRM_ERROR("Failed to map VRAM object after copy %d\n", i);
+			goto out_cleanup;
+		}
+
+		for (gtt_start = gtt_map, gtt_end = gtt_map + size,
+		     vram_start = vram_map, vram_end = vram_map + size;
+		     vram_start < vram_end;
+		     gtt_start++, vram_start++) {
+			if (*vram_start != gtt_start) {
+				DRM_ERROR("Incorrect GTT->VRAM copy %d: Got 0x%p, "
+					  "expected 0x%p (GTT map 0x%p-0x%p)\n",
+					  i, *vram_start, gtt_start, gtt_map,
+					  gtt_end);
+				radeon_object_kunmap(vram_obj);
+				goto out_cleanup;
+			}
+			*vram_start = vram_start;
+		}
+
+		radeon_object_kunmap(vram_obj);
+
+		r = radeon_fence_create(rdev, &fence);
+		if (r) {
+			DRM_ERROR("Failed to create VRAM->GTT fence %d\n", i);
+			goto out_cleanup;
+		}
+
+		r = radeon_copy(rdev, vram_addr, gtt_addr, size / 4096, fence);
+		if (r) {
+			DRM_ERROR("Failed VRAM->GTT copy %d\n", i);
+			goto out_cleanup;
+		}
+
+		r = radeon_fence_wait(fence, false);
+		if (r) {
+			DRM_ERROR("Failed to wait for VRAM->GTT fence %d\n", i);
+			goto out_cleanup;
+		}
+
+		radeon_fence_unref(&fence);
+
+		r = radeon_object_kmap(gtt_obj[i], &gtt_map);
+		if (r) {
+			DRM_ERROR("Failed to map GTT object after copy %d\n", i);
+			goto out_cleanup;
+		}
+
+		for (gtt_start = gtt_map, gtt_end = gtt_map + size,
+		     vram_start = vram_map, vram_end = vram_map + size;
+		     gtt_start < gtt_end;
+		     gtt_start++, vram_start++) {
+			if (*gtt_start != vram_start) {
+				DRM_ERROR("Incorrect VRAM->GTT copy %d: Got 0x%p, "
+					  "expected 0x%p (VRAM map 0x%p-0x%p)\n",
+					  i, *gtt_start, vram_start, vram_map,
+					  vram_end);
+				radeon_object_kunmap(gtt_obj[i]);
+				goto out_cleanup;
+			}
+		}
+
+		radeon_object_kunmap(gtt_obj[i]);
+
+		DRM_INFO("Tested GTT->VRAM and VRAM->GTT copy for GTT offset 0x%llx\n",
+			 gtt_addr - rdev->mc.gtt_location);
+	}
+
+out_cleanup:
+	if (vram_obj) {
+		radeon_object_unpin(vram_obj);
+		radeon_object_unref(&vram_obj);
+	}
+	if (gtt_obj) {
+		for (i = 0; i < n; i++) {
+			if (gtt_obj[i]) {
+				radeon_object_unpin(gtt_obj[i]);
+				radeon_object_unref(&gtt_obj[i]);
+			}
+		}
+		kfree(gtt_obj);
+	}
+	if (fence) {
+		radeon_fence_unref(&fence);
+	}
+	if (r) {
+		printk(KERN_WARNING "Error while testing BO move.\n");
+	}
+}
+
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 1227a97f516..15c3531377e 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -355,23 +355,26 @@ static int radeon_bo_move(struct ttm_buffer_object *bo,
 	if (!rdev->cp.ready) {
 		/* use memcpy */
 		DRM_ERROR("CP is not ready use memcpy.\n");
-		return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+		goto memcpy;
 	}
 
 	if (old_mem->mem_type == TTM_PL_VRAM &&
 	    new_mem->mem_type == TTM_PL_SYSTEM) {
-		return radeon_move_vram_ram(bo, evict, interruptible,
+		r = radeon_move_vram_ram(bo, evict, interruptible,
 					    no_wait, new_mem);
 	} else if (old_mem->mem_type == TTM_PL_SYSTEM &&
 		   new_mem->mem_type == TTM_PL_VRAM) {
-		return radeon_move_ram_vram(bo, evict, interruptible,
+		r = radeon_move_ram_vram(bo, evict, interruptible,
 					    no_wait, new_mem);
 	} else {
 		r = radeon_move_blit(bo, evict, no_wait, new_mem, old_mem);
-		if (unlikely(r)) {
-			return r;
-		}
 	}
+
+	if (r) {
+memcpy:
+		r = ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+	}
+
 	return r;
 }
 
@@ -429,6 +432,8 @@ static struct ttm_bo_driver radeon_bo_driver = {
 	.sync_obj_flush = &radeon_sync_obj_flush,
 	.sync_obj_unref = &radeon_sync_obj_unref,
 	.sync_obj_ref = &radeon_sync_obj_ref,
+	.move_notify = &radeon_bo_move_notify,
+	.fault_reserve_notify = &radeon_bo_fault_reserve_notify,
 };
 
 int radeon_ttm_init(struct radeon_device *rdev)
@@ -442,13 +447,14 @@ int radeon_ttm_init(struct radeon_device *rdev)
 	/* No others user of address space so set it to 0 */
 	r = ttm_bo_device_init(&rdev->mman.bdev,
 			       rdev->mman.mem_global_ref.object,
-			       &radeon_bo_driver, DRM_FILE_PAGE_OFFSET);
+			       &radeon_bo_driver, DRM_FILE_PAGE_OFFSET,
+			       rdev->need_dma32);
 	if (r) {
 		DRM_ERROR("failed initializing buffer object driver(%d).\n", r);
 		return r;
 	}
 	r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_VRAM, 0,
-			   ((rdev->mc.aper_size) >> PAGE_SHIFT));
+			   ((rdev->mc.real_vram_size) >> PAGE_SHIFT));
 	if (r) {
 		DRM_ERROR("Failed initializing VRAM heap.\n");
 		return r;
@@ -465,7 +471,7 @@ int radeon_ttm_init(struct radeon_device *rdev)
 		return r;
 	}
 	DRM_INFO("radeon: %uM of VRAM memory ready\n",
-		 rdev->mc.vram_size / (1024 * 1024));
+		 rdev->mc.real_vram_size / (1024 * 1024));
 	r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_TT, 0,
 			   ((rdev->mc.gtt_size) >> PAGE_SHIFT));
 	if (r) {
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index cc074b5a8f7..b29affd9c5d 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -29,6 +29,7 @@
 #include <drm/drmP.h>
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "radeon_share.h"
 
 /* rs400,rs480 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -164,7 +165,9 @@ int rs400_gart_enable(struct radeon_device *rdev)
 		WREG32(RADEON_BUS_CNTL, tmp);
 	}
 	/* Table should be in 32bits address space so ignore bits above. */
-	tmp = rdev->gart.table_addr & 0xfffff000;
+	tmp = (u32)rdev->gart.table_addr & 0xfffff000;
+	tmp |= (upper_32_bits(rdev->gart.table_addr) & 0xff) << 4;
+
 	WREG32_MC(RS480_GART_BASE, tmp);
 	/* TODO: more tweaking here */
 	WREG32_MC(RS480_GART_FEATURE_ID,
@@ -201,10 +204,17 @@ void rs400_gart_disable(struct radeon_device *rdev)
 
 int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 {
+	uint32_t entry;
+
 	if (i < 0 || i > rdev->gart.num_gpu_pages) {
 		return -EINVAL;
 	}
-	rdev->gart.table.ram.ptr[i] = cpu_to_le32(((uint32_t)addr) | 0xC);
+
+	entry = (lower_32_bits(addr) & PAGE_MASK) |
+		((upper_32_bits(addr) & 0xff) << 4) |
+		0xc;
+	entry = cpu_to_le32(entry);
+	rdev->gart.table.ram.ptr[i] = entry;
 	return 0;
 }
 
@@ -223,10 +233,9 @@ int rs400_mc_init(struct radeon_device *rdev)
 
 	rs400_gpu_init(rdev);
 	rs400_gart_disable(rdev);
-	rdev->mc.gtt_location = rdev->mc.vram_size;
+	rdev->mc.gtt_location = rdev->mc.mc_vram_size;
 	rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
 	rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
-	rdev->mc.vram_location = 0xFFFFFFFFUL;
 	r = radeon_mc_setup(rdev);
 	if (r) {
 		return r;
@@ -238,7 +247,7 @@ int rs400_mc_init(struct radeon_device *rdev)
 		       "programming pipes. Bad things might happen.\n");
 	}
 
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
 	tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
 	WREG32(RADEON_MC_FB_LOCATION, tmp);
@@ -284,21 +293,12 @@ void rs400_gpu_init(struct radeon_device *rdev)
  */
 void rs400_vram_info(struct radeon_device *rdev)
 {
-	uint32_t tom;
-
 	rs400_gart_adjust_size(rdev);
 	/* DDR for all card after R300 & IGP */
 	rdev->mc.vram_is_ddr = true;
 	rdev->mc.vram_width = 128;
 
-	/* read NB_TOM to get the amount of ram stolen for the GPU */
-	tom = RREG32(RADEON_NB_TOM);
-	rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-
-	/* Could aper size report 0 ? */
-	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	r100_vram_init_sizes(rdev);
 }
 
 
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index ab0c967553e..02fd11aad6a 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -223,7 +223,7 @@ int rs600_mc_init(struct radeon_device *rdev)
 		printk(KERN_WARNING "Failed to wait MC idle while "
 		       "programming pipes. Bad things might happen.\n");
 	}
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	tmp = REG_SET(RS600_MC_FB_TOP, tmp >> 16);
 	tmp |= REG_SET(RS600_MC_FB_START, rdev->mc.vram_location >> 16);
 	WREG32_MC(RS600_MC_FB_LOCATION, tmp);
@@ -240,6 +240,88 @@ void rs600_mc_fini(struct radeon_device *rdev)
 
 
 /*
+ * Interrupts
+ */
+int rs600_irq_set(struct radeon_device *rdev)
+{
+	uint32_t tmp = 0;
+	uint32_t mode_int = 0;
+
+	if (rdev->irq.sw_int) {
+		tmp |= RADEON_SW_INT_ENABLE;
+	}
+	if (rdev->irq.crtc_vblank_int[0]) {
+		tmp |= AVIVO_DISPLAY_INT_STATUS;
+		mode_int |= AVIVO_D1MODE_INT_MASK;
+	}
+	if (rdev->irq.crtc_vblank_int[1]) {
+		tmp |= AVIVO_DISPLAY_INT_STATUS;
+		mode_int |= AVIVO_D2MODE_INT_MASK;
+	}
+	WREG32(RADEON_GEN_INT_CNTL, tmp);
+	WREG32(AVIVO_DxMODE_INT_MASK, mode_int);
+	return 0;
+}
+
+static inline uint32_t rs600_irq_ack(struct radeon_device *rdev, u32 *r500_disp_int)
+{
+	uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS);
+	uint32_t irq_mask = RADEON_SW_INT_TEST;
+
+	if (irqs & AVIVO_DISPLAY_INT_STATUS) {
+		*r500_disp_int = RREG32(AVIVO_DISP_INTERRUPT_STATUS);
+		if (*r500_disp_int & AVIVO_D1_VBLANK_INTERRUPT) {
+			WREG32(AVIVO_D1MODE_VBLANK_STATUS, AVIVO_VBLANK_ACK);
+		}
+		if (*r500_disp_int & AVIVO_D2_VBLANK_INTERRUPT) {
+			WREG32(AVIVO_D2MODE_VBLANK_STATUS, AVIVO_VBLANK_ACK);
+		}
+	} else {
+		*r500_disp_int = 0;
+	}
+
+	if (irqs) {
+		WREG32(RADEON_GEN_INT_STATUS, irqs);
+	}
+	return irqs & irq_mask;
+}
+
+int rs600_irq_process(struct radeon_device *rdev)
+{
+	uint32_t status;
+	uint32_t r500_disp_int;
+
+	status = rs600_irq_ack(rdev, &r500_disp_int);
+	if (!status && !r500_disp_int) {
+		return IRQ_NONE;
+	}
+	while (status || r500_disp_int) {
+		/* SW interrupt */
+		if (status & RADEON_SW_INT_TEST) {
+			radeon_fence_process(rdev);
+		}
+		/* Vertical blank interrupts */
+		if (r500_disp_int & AVIVO_D1_VBLANK_INTERRUPT) {
+			drm_handle_vblank(rdev->ddev, 0);
+		}
+		if (r500_disp_int & AVIVO_D2_VBLANK_INTERRUPT) {
+			drm_handle_vblank(rdev->ddev, 1);
+		}
+		status = rs600_irq_ack(rdev, &r500_disp_int);
+	}
+	return IRQ_HANDLED;
+}
+
+u32 rs600_get_vblank_counter(struct radeon_device *rdev, int crtc)
+{
+	if (crtc == 0)
+		return RREG32(AVIVO_D1CRTC_FRAME_COUNT);
+	else
+		return RREG32(AVIVO_D2CRTC_FRAME_COUNT);
+}
+
+
+/*
  * Global GPU functions
  */
 void rs600_disable_vga(struct radeon_device *rdev)
@@ -301,6 +383,11 @@ void rs600_vram_info(struct radeon_device *rdev)
 	rdev->mc.vram_width = 128;
 }
 
+void rs600_bandwidth_update(struct radeon_device *rdev)
+{
+	/* FIXME: implement, should this be like rs690 ? */
+}
+
 
 /*
  * Indirect registers accessor
@@ -322,3 +409,68 @@ void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 		((reg) & RS600_MC_ADDR_MASK));
 	WREG32(RS600_MC_DATA, v);
 }
+
+static const unsigned rs600_reg_safe_bm[219] = {
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0x17FF1FFF, 0xFFFFFFFC, 0xFFFFFFFF, 0xFF30FFBF,
+	0xFFFFFFF8, 0xC3E6FFFF, 0xFFFFF6DF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFF03F,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFEFCE, 0xF00EBFFF, 0x007C0000,
+	0xF0000078, 0xFF000009, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFF7FF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFC78, 0xFFFFFFFF, 0xFFFFFFFE, 0xFFFFFFFF,
+	0x38FF8F50, 0xFFF88082, 0xF000000C, 0xFAE009FF,
+	0x0000FFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000,
+	0x00000000, 0x0000C100, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0xFFFF0000, 0xFFFFFFFF, 0xFF80FFFF,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x0003FC01, 0xFFFFFCF8, 0xFF800B19, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+};
+
+int rs600_init(struct radeon_device *rdev)
+{
+	rdev->config.r300.reg_safe_bm = rs600_reg_safe_bm;
+	rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(rs600_reg_safe_bm);
+	return 0;
+}
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 79ba85042b5..879882533e4 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -28,6 +28,9 @@
 #include "drmP.h"
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "rs690r.h"
+#include "atom.h"
+#include "atom-bits.h"
 
 /* rs690,rs740 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -64,7 +67,7 @@ int rs690_mc_init(struct radeon_device *rdev)
 	rs400_gart_disable(rdev);
 
 	/* Setup GPU memory space */
-	rdev->mc.gtt_location = rdev->mc.vram_size;
+	rdev->mc.gtt_location = rdev->mc.mc_vram_size;
 	rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
 	rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
 	rdev->mc.vram_location = 0xFFFFFFFFUL;
@@ -79,7 +82,7 @@ int rs690_mc_init(struct radeon_device *rdev)
 		printk(KERN_WARNING "Failed to wait MC idle while "
 		       "programming pipes. Bad things might happen.\n");
 	}
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	tmp = REG_SET(RS690_MC_FB_TOP, tmp >> 16);
 	tmp |= REG_SET(RS690_MC_FB_START, rdev->mc.vram_location >> 16);
 	WREG32_MC(RS690_MCCFG_FB_LOCATION, tmp);
@@ -138,9 +141,82 @@ void rs690_gpu_init(struct radeon_device *rdev)
 /*
  * VRAM info.
  */
+void rs690_pm_info(struct radeon_device *rdev)
+{
+	int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo);
+	struct _ATOM_INTEGRATED_SYSTEM_INFO *info;
+	struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 *info_v2;
+	void *ptr;
+	uint16_t data_offset;
+	uint8_t frev, crev;
+	fixed20_12 tmp;
+
+	atom_parse_data_header(rdev->mode_info.atom_context, index, NULL,
+			       &frev, &crev, &data_offset);
+	ptr = rdev->mode_info.atom_context->bios + data_offset;
+	info = (struct _ATOM_INTEGRATED_SYSTEM_INFO *)ptr;
+	info_v2 = (struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 *)ptr;
+	/* Get various system informations from bios */
+	switch (crev) {
+	case 1:
+		tmp.full = rfixed_const(100);
+		rdev->pm.igp_sideport_mclk.full = rfixed_const(info->ulBootUpMemoryClock);
+		rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp);
+		rdev->pm.igp_system_mclk.full = rfixed_const(le16_to_cpu(info->usK8MemoryClock));
+		rdev->pm.igp_ht_link_clk.full = rfixed_const(le16_to_cpu(info->usFSBClock));
+		rdev->pm.igp_ht_link_width.full = rfixed_const(info->ucHTLinkWidth);
+		break;
+	case 2:
+		tmp.full = rfixed_const(100);
+		rdev->pm.igp_sideport_mclk.full = rfixed_const(info_v2->ulBootUpSidePortClock);
+		rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp);
+		rdev->pm.igp_system_mclk.full = rfixed_const(info_v2->ulBootUpUMAClock);
+		rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp);
+		rdev->pm.igp_ht_link_clk.full = rfixed_const(info_v2->ulHTLinkFreq);
+		rdev->pm.igp_ht_link_clk.full = rfixed_div(rdev->pm.igp_ht_link_clk, tmp);
+		rdev->pm.igp_ht_link_width.full = rfixed_const(le16_to_cpu(info_v2->usMinHTLinkWidth));
+		break;
+	default:
+		tmp.full = rfixed_const(100);
+		/* We assume the slower possible clock ie worst case */
+		/* DDR 333Mhz */
+		rdev->pm.igp_sideport_mclk.full = rfixed_const(333);
+		/* FIXME: system clock ? */
+		rdev->pm.igp_system_mclk.full = rfixed_const(100);
+		rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp);
+		rdev->pm.igp_ht_link_clk.full = rfixed_const(200);
+		rdev->pm.igp_ht_link_width.full = rfixed_const(8);
+		DRM_ERROR("No integrated system info for your GPU, using safe default\n");
+		break;
+	}
+	/* Compute various bandwidth */
+	/* k8_bandwidth = (memory_clk / 2) * 2 * 8 * 0.5 = memory_clk * 4  */
+	tmp.full = rfixed_const(4);
+	rdev->pm.k8_bandwidth.full = rfixed_mul(rdev->pm.igp_system_mclk, tmp);
+	/* ht_bandwidth = ht_clk * 2 * ht_width / 8 * 0.8
+	 *              = ht_clk * ht_width / 5
+	 */
+	tmp.full = rfixed_const(5);
+	rdev->pm.ht_bandwidth.full = rfixed_mul(rdev->pm.igp_ht_link_clk,
+						rdev->pm.igp_ht_link_width);
+	rdev->pm.ht_bandwidth.full = rfixed_div(rdev->pm.ht_bandwidth, tmp);
+	if (tmp.full < rdev->pm.max_bandwidth.full) {
+		/* HT link is a limiting factor */
+		rdev->pm.max_bandwidth.full = tmp.full;
+	}
+	/* sideport_bandwidth = (sideport_clk / 2) * 2 * 2 * 0.7
+	 *                    = (sideport_clk * 14) / 10
+	 */
+	tmp.full = rfixed_const(14);
+	rdev->pm.sideport_bandwidth.full = rfixed_mul(rdev->pm.igp_sideport_mclk, tmp);
+	tmp.full = rfixed_const(10);
+	rdev->pm.sideport_bandwidth.full = rfixed_div(rdev->pm.sideport_bandwidth, tmp);
+}
+
 void rs690_vram_info(struct radeon_device *rdev)
 {
 	uint32_t tmp;
+	fixed20_12 a;
 
 	rs400_gart_adjust_size(rdev);
 	/* DDR for all card after R300 & IGP */
@@ -152,12 +228,409 @@ void rs690_vram_info(struct radeon_device *rdev)
 	} else {
 		rdev->mc.vram_width = 64;
 	}
-	rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+	rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+	rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
 
 	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
 	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	rs690_pm_info(rdev);
+	/* FIXME: we should enforce default clock in case GPU is not in
+	 * default setup
+	 */
+	a.full = rfixed_const(100);
+	rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+	rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+	a.full = rfixed_const(16);
+	/* core_bandwidth = sclk(Mhz) * 16 */
+	rdev->pm.core_bandwidth.full = rfixed_div(rdev->pm.sclk, a);
+}
+
+void rs690_line_buffer_adjust(struct radeon_device *rdev,
+			      struct drm_display_mode *mode1,
+			      struct drm_display_mode *mode2)
+{
+	u32 tmp;
+
+	/*
+	 * Line Buffer Setup
+	 * There is a single line buffer shared by both display controllers.
+	 * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between
+	 * the display controllers.  The paritioning can either be done
+	 * manually or via one of four preset allocations specified in bits 1:0:
+	 *  0 - line buffer is divided in half and shared between crtc
+	 *  1 - D1 gets 3/4 of the line buffer, D2 gets 1/4
+	 *  2 - D1 gets the whole buffer
+	 *  3 - D1 gets 1/4 of the line buffer, D2 gets 3/4
+	 * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual
+	 * allocation mode. In manual allocation mode, D1 always starts at 0,
+	 * D1 end/2 is specified in bits 14:4; D2 allocation follows D1.
+	 */
+	tmp = RREG32(DC_LB_MEMORY_SPLIT) & ~DC_LB_MEMORY_SPLIT_MASK;
+	tmp &= ~DC_LB_MEMORY_SPLIT_SHIFT_MODE;
+	/* auto */
+	if (mode1 && mode2) {
+		if (mode1->hdisplay > mode2->hdisplay) {
+			if (mode1->hdisplay > 2560)
+				tmp |= DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
+			else
+				tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+		} else if (mode2->hdisplay > mode1->hdisplay) {
+			if (mode2->hdisplay > 2560)
+				tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+			else
+				tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+		} else
+			tmp |= AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+	} else if (mode1) {
+		tmp |= DC_LB_MEMORY_SPLIT_D1_ONLY;
+	} else if (mode2) {
+		tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+	}
+	WREG32(DC_LB_MEMORY_SPLIT, tmp);
+}
+
+struct rs690_watermark {
+	u32        lb_request_fifo_depth;
+	fixed20_12 num_line_pair;
+	fixed20_12 estimated_width;
+	fixed20_12 worst_case_latency;
+	fixed20_12 consumption_rate;
+	fixed20_12 active_time;
+	fixed20_12 dbpp;
+	fixed20_12 priority_mark_max;
+	fixed20_12 priority_mark;
+	fixed20_12 sclk;
+};
+
+void rs690_crtc_bandwidth_compute(struct radeon_device *rdev,
+				  struct radeon_crtc *crtc,
+				  struct rs690_watermark *wm)
+{
+	struct drm_display_mode *mode = &crtc->base.mode;
+	fixed20_12 a, b, c;
+	fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width;
+	fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency;
+	/* FIXME: detect IGP with sideport memory, i don't think there is any
+	 * such product available
+	 */
+	bool sideport = false;
+
+	if (!crtc->base.enabled) {
+		/* FIXME: wouldn't it better to set priority mark to maximum */
+		wm->lb_request_fifo_depth = 4;
+		return;
+	}
+
+	if (crtc->vsc.full > rfixed_const(2))
+		wm->num_line_pair.full = rfixed_const(2);
+	else
+		wm->num_line_pair.full = rfixed_const(1);
+
+	b.full = rfixed_const(mode->crtc_hdisplay);
+	c.full = rfixed_const(256);
+	a.full = rfixed_mul(wm->num_line_pair, b);
+	request_fifo_depth.full = rfixed_div(a, c);
+	if (a.full < rfixed_const(4)) {
+		wm->lb_request_fifo_depth = 4;
+	} else {
+		wm->lb_request_fifo_depth = rfixed_trunc(request_fifo_depth);
+	}
+
+	/* Determine consumption rate
+	 *  pclk = pixel clock period(ns) = 1000 / (mode.clock / 1000)
+	 *  vtaps = number of vertical taps,
+	 *  vsc = vertical scaling ratio, defined as source/destination
+	 *  hsc = horizontal scaling ration, defined as source/destination
+	 */
+	a.full = rfixed_const(mode->clock);
+	b.full = rfixed_const(1000);
+	a.full = rfixed_div(a, b);
+	pclk.full = rfixed_div(b, a);
+	if (crtc->rmx_type != RMX_OFF) {
+		b.full = rfixed_const(2);
+		if (crtc->vsc.full > b.full)
+			b.full = crtc->vsc.full;
+		b.full = rfixed_mul(b, crtc->hsc);
+		c.full = rfixed_const(2);
+		b.full = rfixed_div(b, c);
+		consumption_time.full = rfixed_div(pclk, b);
+	} else {
+		consumption_time.full = pclk.full;
+	}
+	a.full = rfixed_const(1);
+	wm->consumption_rate.full = rfixed_div(a, consumption_time);
+
+
+	/* Determine line time
+	 *  LineTime = total time for one line of displayhtotal
+	 *  LineTime = total number of horizontal pixels
+	 *  pclk = pixel clock period(ns)
+	 */
+	a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+	line_time.full = rfixed_mul(a, pclk);
+
+	/* Determine active time
+	 *  ActiveTime = time of active region of display within one line,
+	 *  hactive = total number of horizontal active pixels
+	 *  htotal = total number of horizontal pixels
+	 */
+	a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+	b.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+	wm->active_time.full = rfixed_mul(line_time, b);
+	wm->active_time.full = rfixed_div(wm->active_time, a);
+
+	/* Maximun bandwidth is the minimun bandwidth of all component */
+	rdev->pm.max_bandwidth = rdev->pm.core_bandwidth;
+	if (sideport) {
+		if (rdev->pm.max_bandwidth.full > rdev->pm.sideport_bandwidth.full &&
+			rdev->pm.sideport_bandwidth.full)
+			rdev->pm.max_bandwidth = rdev->pm.sideport_bandwidth;
+		read_delay_latency.full = rfixed_const(370 * 800 * 1000);
+		read_delay_latency.full = rfixed_div(read_delay_latency,
+			rdev->pm.igp_sideport_mclk);
+	} else {
+		if (rdev->pm.max_bandwidth.full > rdev->pm.k8_bandwidth.full &&
+			rdev->pm.k8_bandwidth.full)
+			rdev->pm.max_bandwidth = rdev->pm.k8_bandwidth;
+		if (rdev->pm.max_bandwidth.full > rdev->pm.ht_bandwidth.full &&
+			rdev->pm.ht_bandwidth.full)
+			rdev->pm.max_bandwidth = rdev->pm.ht_bandwidth;
+		read_delay_latency.full = rfixed_const(5000);
+	}
+
+	/* sclk = system clocks(ns) = 1000 / max_bandwidth / 16 */
+	a.full = rfixed_const(16);
+	rdev->pm.sclk.full = rfixed_mul(rdev->pm.max_bandwidth, a);
+	a.full = rfixed_const(1000);
+	rdev->pm.sclk.full = rfixed_div(a, rdev->pm.sclk);
+	/* Determine chunk time
+	 * ChunkTime = the time it takes the DCP to send one chunk of data
+	 * to the LB which consists of pipeline delay and inter chunk gap
+	 * sclk = system clock(ns)
+	 */
+	a.full = rfixed_const(256 * 13);
+	chunk_time.full = rfixed_mul(rdev->pm.sclk, a);
+	a.full = rfixed_const(10);
+	chunk_time.full = rfixed_div(chunk_time, a);
+
+	/* Determine the worst case latency
+	 * NumLinePair = Number of line pairs to request(1=2 lines, 2=4 lines)
+	 * WorstCaseLatency = worst case time from urgent to when the MC starts
+	 *                    to return data
+	 * READ_DELAY_IDLE_MAX = constant of 1us
+	 * ChunkTime = time it takes the DCP to send one chunk of data to the LB
+	 *             which consists of pipeline delay and inter chunk gap
+	 */
+	if (rfixed_trunc(wm->num_line_pair) > 1) {
+		a.full = rfixed_const(3);
+		wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+		wm->worst_case_latency.full += read_delay_latency.full;
+	} else {
+		a.full = rfixed_const(2);
+		wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+		wm->worst_case_latency.full += read_delay_latency.full;
+	}
+
+	/* Determine the tolerable latency
+	 * TolerableLatency = Any given request has only 1 line time
+	 *                    for the data to be returned
+	 * LBRequestFifoDepth = Number of chunk requests the LB can
+	 *                      put into the request FIFO for a display
+	 *  LineTime = total time for one line of display
+	 *  ChunkTime = the time it takes the DCP to send one chunk
+	 *              of data to the LB which consists of
+	 *  pipeline delay and inter chunk gap
+	 */
+	if ((2+wm->lb_request_fifo_depth) >= rfixed_trunc(request_fifo_depth)) {
+		tolerable_latency.full = line_time.full;
+	} else {
+		tolerable_latency.full = rfixed_const(wm->lb_request_fifo_depth - 2);
+		tolerable_latency.full = request_fifo_depth.full - tolerable_latency.full;
+		tolerable_latency.full = rfixed_mul(tolerable_latency, chunk_time);
+		tolerable_latency.full = line_time.full - tolerable_latency.full;
+	}
+	/* We assume worst case 32bits (4 bytes) */
+	wm->dbpp.full = rfixed_const(4 * 8);
+
+	/* Determine the maximum priority mark
+	 *  width = viewport width in pixels
+	 */
+	a.full = rfixed_const(16);
+	wm->priority_mark_max.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+	wm->priority_mark_max.full = rfixed_div(wm->priority_mark_max, a);
+
+	/* Determine estimated width */
+	estimated_width.full = tolerable_latency.full - wm->worst_case_latency.full;
+	estimated_width.full = rfixed_div(estimated_width, consumption_time);
+	if (rfixed_trunc(estimated_width) > crtc->base.mode.crtc_hdisplay) {
+		wm->priority_mark.full = rfixed_const(10);
+	} else {
+		a.full = rfixed_const(16);
+		wm->priority_mark.full = rfixed_div(estimated_width, a);
+		wm->priority_mark.full = wm->priority_mark_max.full - wm->priority_mark.full;
+	}
 }
 
+void rs690_bandwidth_update(struct radeon_device *rdev)
+{
+	struct drm_display_mode *mode0 = NULL;
+	struct drm_display_mode *mode1 = NULL;
+	struct rs690_watermark wm0;
+	struct rs690_watermark wm1;
+	u32 tmp;
+	fixed20_12 priority_mark02, priority_mark12, fill_rate;
+	fixed20_12 a, b;
+
+	if (rdev->mode_info.crtcs[0]->base.enabled)
+		mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+	if (rdev->mode_info.crtcs[1]->base.enabled)
+		mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+	/*
+	 * Set display0/1 priority up in the memory controller for
+	 * modes if the user specifies HIGH for displaypriority
+	 * option.
+	 */
+	if (rdev->disp_priority == 2) {
+		tmp = RREG32_MC(MC_INIT_MISC_LAT_TIMER);
+		tmp &= ~MC_DISP1R_INIT_LAT_MASK;
+		tmp &= ~MC_DISP0R_INIT_LAT_MASK;
+		if (mode1)
+			tmp |= (1 << MC_DISP1R_INIT_LAT_SHIFT);
+		if (mode0)
+			tmp |= (1 << MC_DISP0R_INIT_LAT_SHIFT);
+		WREG32_MC(MC_INIT_MISC_LAT_TIMER, tmp);
+	}
+	rs690_line_buffer_adjust(rdev, mode0, mode1);
+
+	if ((rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740))
+		WREG32(DCP_CONTROL, 0);
+	if ((rdev->family == CHIP_RS780) || (rdev->family == CHIP_RS880))
+		WREG32(DCP_CONTROL, 2);
+
+	rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[0], &wm0);
+	rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[1], &wm1);
+
+	tmp = (wm0.lb_request_fifo_depth - 1);
+	tmp |= (wm1.lb_request_fifo_depth - 1) << 16;
+	WREG32(LB_MAX_REQ_OUTSTANDING, tmp);
+
+	if (mode0 && mode1) {
+		if (rfixed_trunc(wm0.dbpp) > 64)
+			a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair);
+		else
+			a.full = wm0.num_line_pair.full;
+		if (rfixed_trunc(wm1.dbpp) > 64)
+			b.full = rfixed_mul(wm1.dbpp, wm1.num_line_pair);
+		else
+			b.full = wm1.num_line_pair.full;
+		a.full += b.full;
+		fill_rate.full = rfixed_div(wm0.sclk, a);
+		if (wm0.consumption_rate.full > fill_rate.full) {
+			b.full = wm0.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm0.active_time);
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			a.full = a.full + b.full;
+			b.full = rfixed_const(16 * 1000);
+			priority_mark02.full = rfixed_div(a, b);
+		} else {
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			b.full = rfixed_const(16 * 1000);
+			priority_mark02.full = rfixed_div(a, b);
+		}
+		if (wm1.consumption_rate.full > fill_rate.full) {
+			b.full = wm1.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm1.active_time);
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			a.full = a.full + b.full;
+			b.full = rfixed_const(16 * 1000);
+			priority_mark12.full = rfixed_div(a, b);
+		} else {
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			b.full = rfixed_const(16 * 1000);
+			priority_mark12.full = rfixed_div(a, b);
+		}
+		if (wm0.priority_mark.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark.full;
+		if (rfixed_trunc(priority_mark02) < 0)
+			priority_mark02.full = 0;
+		if (wm0.priority_mark_max.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark_max.full;
+		if (wm1.priority_mark.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark.full;
+		if (rfixed_trunc(priority_mark12) < 0)
+			priority_mark12.full = 0;
+		if (wm1.priority_mark_max.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark_max.full;
+		WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+		WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+	} else if (mode0) {
+		if (rfixed_trunc(wm0.dbpp) > 64)
+			a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair);
+		else
+			a.full = wm0.num_line_pair.full;
+		fill_rate.full = rfixed_div(wm0.sclk, a);
+		if (wm0.consumption_rate.full > fill_rate.full) {
+			b.full = wm0.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm0.active_time);
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			a.full = a.full + b.full;
+			b.full = rfixed_const(16 * 1000);
+			priority_mark02.full = rfixed_div(a, b);
+		} else {
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			b.full = rfixed_const(16 * 1000);
+			priority_mark02.full = rfixed_div(a, b);
+		}
+		if (wm0.priority_mark.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark.full;
+		if (rfixed_trunc(priority_mark02) < 0)
+			priority_mark02.full = 0;
+		if (wm0.priority_mark_max.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark_max.full;
+		WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+		WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+	} else {
+		if (rfixed_trunc(wm1.dbpp) > 64)
+			a.full = rfixed_mul(wm1.dbpp, wm1.num_line_pair);
+		else
+			a.full = wm1.num_line_pair.full;
+		fill_rate.full = rfixed_div(wm1.sclk, a);
+		if (wm1.consumption_rate.full > fill_rate.full) {
+			b.full = wm1.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm1.active_time);
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			a.full = a.full + b.full;
+			b.full = rfixed_const(16 * 1000);
+			priority_mark12.full = rfixed_div(a, b);
+		} else {
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			b.full = rfixed_const(16 * 1000);
+			priority_mark12.full = rfixed_div(a, b);
+		}
+		if (wm1.priority_mark.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark.full;
+		if (rfixed_trunc(priority_mark12) < 0)
+			priority_mark12.full = 0;
+		if (wm1.priority_mark_max.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark_max.full;
+		WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+		WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+		WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+		WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+	}
+}
 
 /*
  * Indirect registers accessor
@@ -179,3 +652,4 @@ void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 	WREG32(RS690_MC_DATA, v);
 	WREG32(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK);
 }
+
diff --git a/drivers/gpu/drm/radeon/rs690r.h b/drivers/gpu/drm/radeon/rs690r.h
new file mode 100644
index 00000000000..c0d9faa2175
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rs690r.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef RS690R_H
+#define RS690R_H
+
+/* RS690/RS740 registers */
+#define MC_INDEX			0x0078
+#	define MC_INDEX_MASK			0x1FF
+#	define MC_INDEX_WR_EN			(1 << 9)
+#	define MC_INDEX_WR_ACK			0x7F
+#define MC_DATA				0x007C
+#define HDP_FB_LOCATION			0x0134
+#define DC_LB_MEMORY_SPLIT		0x6520
+#define		DC_LB_MEMORY_SPLIT_MASK			0x00000003
+#define		DC_LB_MEMORY_SPLIT_SHIFT		0
+#define		DC_LB_MEMORY_SPLIT_D1HALF_D2HALF	0
+#define		DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q		1
+#define		DC_LB_MEMORY_SPLIT_D1_ONLY		2
+#define		DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q		3
+#define		DC_LB_MEMORY_SPLIT_SHIFT_MODE		(1 << 2)
+#define		DC_LB_DISP1_END_ADR_SHIFT		4
+#define		DC_LB_DISP1_END_ADR_MASK		0x00007FF0
+#define D1MODE_PRIORITY_A_CNT		0x6548
+#define		MODE_PRIORITY_MARK_MASK			0x00007FFF
+#define		MODE_PRIORITY_OFF			(1 << 16)
+#define		MODE_PRIORITY_ALWAYS_ON			(1 << 20)
+#define		MODE_PRIORITY_FORCE_MASK		(1 << 24)
+#define D1MODE_PRIORITY_B_CNT		0x654C
+#define LB_MAX_REQ_OUTSTANDING		0x6D58
+#define		LB_D1_MAX_REQ_OUTSTANDING_MASK		0x0000000F
+#define		LB_D1_MAX_REQ_OUTSTANDING_SHIFT		0
+#define		LB_D2_MAX_REQ_OUTSTANDING_MASK		0x000F0000
+#define		LB_D2_MAX_REQ_OUTSTANDING_SHIFT		16
+#define DCP_CONTROL			0x6C9C
+#define D2MODE_PRIORITY_A_CNT		0x6D48
+#define D2MODE_PRIORITY_B_CNT		0x6D4C
+
+/* MC indirect registers */
+#define MC_STATUS_IDLE				(1 << 0)
+#define MC_MISC_CNTL			0x18
+#define		DISABLE_GTW			(1 << 1)
+#define		GART_INDEX_REG_EN		(1 << 12)
+#define		BLOCK_GFX_D3_EN			(1 << 14)
+#define GART_FEATURE_ID			0x2B
+#define		HANG_EN				(1 << 11)
+#define		TLB_ENABLE			(1 << 18)
+#define		P2P_ENABLE			(1 << 19)
+#define		GTW_LAC_EN			(1 << 25)
+#define		LEVEL2_GART			(0 << 30)
+#define		LEVEL1_GART			(1 << 30)
+#define		PDC_EN				(1 << 31)
+#define GART_BASE			0x2C
+#define GART_CACHE_CNTRL		0x2E
+#	define GART_CACHE_INVALIDATE		(1 << 0)
+#define MC_STATUS			0x90
+#define MCCFG_FB_LOCATION		0x100
+#define		MC_FB_START_MASK		0x0000FFFF
+#define		MC_FB_START_SHIFT		0
+#define		MC_FB_TOP_MASK			0xFFFF0000
+#define		MC_FB_TOP_SHIFT			16
+#define MCCFG_AGP_LOCATION		0x101
+#define		MC_AGP_START_MASK		0x0000FFFF
+#define		MC_AGP_START_SHIFT		0
+#define		MC_AGP_TOP_MASK			0xFFFF0000
+#define		MC_AGP_TOP_SHIFT		16
+#define MCCFG_AGP_BASE			0x102
+#define MCCFG_AGP_BASE_2		0x103
+#define MC_INIT_MISC_LAT_TIMER		0x104
+#define		MC_DISP0R_INIT_LAT_SHIFT	8
+#define		MC_DISP0R_INIT_LAT_MASK		0x00000F00
+#define		MC_DISP1R_INIT_LAT_SHIFT	12
+#define		MC_DISP1R_INIT_LAT_MASK		0x0000F000
+
+#endif
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index ffea37b1b3e..0566fb67e46 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -27,8 +27,9 @@
  */
 #include <linux/seq_file.h>
 #include "drmP.h"
-#include "radeon_reg.h"
+#include "rv515r.h"
 #include "radeon.h"
+#include "radeon_share.h"
 
 /* rv515 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -99,26 +100,26 @@ int rv515_mc_init(struct radeon_device *rdev)
 		       "programming pipes. Bad things might happen.\n");
 	}
 	/* Write VRAM size in case we are limiting it */
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-	tmp = REG_SET(RV515_MC_FB_START, rdev->mc.vram_location >> 16);
+	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+	tmp = REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
 	WREG32(0x134, tmp);
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
-	tmp = REG_SET(RV515_MC_FB_TOP, tmp >> 16);
-	tmp |= REG_SET(RV515_MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32_MC(RV515_MC_FB_LOCATION, tmp);
-	WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
+	tmp = REG_SET(MC_FB_TOP, tmp >> 16);
+	tmp |= REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
+	WREG32_MC(MC_FB_LOCATION, tmp);
+	WREG32(HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
 	WREG32(0x310, rdev->mc.vram_location);
 	if (rdev->flags & RADEON_IS_AGP) {
 		tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
-		tmp = REG_SET(RV515_MC_AGP_TOP, tmp >> 16);
-		tmp |= REG_SET(RV515_MC_AGP_START, rdev->mc.gtt_location >> 16);
-		WREG32_MC(RV515_MC_AGP_LOCATION, tmp);
-		WREG32_MC(RV515_MC_AGP_BASE, rdev->mc.agp_base);
-		WREG32_MC(RV515_MC_AGP_BASE_2, 0);
+		tmp = REG_SET(MC_AGP_TOP, tmp >> 16);
+		tmp |= REG_SET(MC_AGP_START, rdev->mc.gtt_location >> 16);
+		WREG32_MC(MC_AGP_LOCATION, tmp);
+		WREG32_MC(MC_AGP_BASE, rdev->mc.agp_base);
+		WREG32_MC(MC_AGP_BASE_2, 0);
 	} else {
-		WREG32_MC(RV515_MC_AGP_LOCATION, 0x0FFFFFFF);
-		WREG32_MC(RV515_MC_AGP_BASE, 0);
-		WREG32_MC(RV515_MC_AGP_BASE_2, 0);
+		WREG32_MC(MC_AGP_LOCATION, 0x0FFFFFFF);
+		WREG32_MC(MC_AGP_BASE, 0);
+		WREG32_MC(MC_AGP_BASE_2, 0);
 	}
 	return 0;
 }
@@ -136,95 +137,67 @@ void rv515_mc_fini(struct radeon_device *rdev)
  */
 void rv515_ring_start(struct radeon_device *rdev)
 {
-	unsigned gb_tile_config;
 	int r;
 
-	/* Sub pixel 1/12 so we can have 4K rendering according to doc */
-	gb_tile_config = R300_ENABLE_TILING | R300_TILE_SIZE_16;
-	switch (rdev->num_gb_pipes) {
-	case 2:
-		gb_tile_config |= R300_PIPE_COUNT_R300;
-		break;
-	case 3:
-		gb_tile_config |= R300_PIPE_COUNT_R420_3P;
-		break;
-	case 4:
-		gb_tile_config |= R300_PIPE_COUNT_R420;
-		break;
-	case 1:
-	default:
-		gb_tile_config |= R300_PIPE_COUNT_RV350;
-		break;
-	}
-
 	r = radeon_ring_lock(rdev, 64);
 	if (r) {
 		return;
 	}
-	radeon_ring_write(rdev, PACKET0(RADEON_ISYNC_CNTL, 0));
-	radeon_ring_write(rdev,
-			  RADEON_ISYNC_ANY2D_IDLE3D |
-			  RADEON_ISYNC_ANY3D_IDLE2D |
-			  RADEON_ISYNC_WAIT_IDLEGUI |
-			  RADEON_ISYNC_CPSCRATCH_IDLEGUI);
-	radeon_ring_write(rdev, PACKET0(R300_GB_TILE_CONFIG, 0));
-	radeon_ring_write(rdev, gb_tile_config);
-	radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
+	radeon_ring_write(rdev, PACKET0(ISYNC_CNTL, 0));
 	radeon_ring_write(rdev,
-			  RADEON_WAIT_2D_IDLECLEAN |
-			  RADEON_WAIT_3D_IDLECLEAN);
+			  ISYNC_ANY2D_IDLE3D |
+			  ISYNC_ANY3D_IDLE2D |
+			  ISYNC_WAIT_IDLEGUI |
+			  ISYNC_CPSCRATCH_IDLEGUI);
+	radeon_ring_write(rdev, PACKET0(WAIT_UNTIL, 0));
+	radeon_ring_write(rdev, WAIT_2D_IDLECLEAN | WAIT_3D_IDLECLEAN);
 	radeon_ring_write(rdev, PACKET0(0x170C, 0));
 	radeon_ring_write(rdev, 1 << 31);
-	radeon_ring_write(rdev, PACKET0(R300_GB_SELECT, 0));
+	radeon_ring_write(rdev, PACKET0(GB_SELECT, 0));
 	radeon_ring_write(rdev, 0);
-	radeon_ring_write(rdev, PACKET0(R300_GB_ENABLE, 0));
+	radeon_ring_write(rdev, PACKET0(GB_ENABLE, 0));
 	radeon_ring_write(rdev, 0);
 	radeon_ring_write(rdev, PACKET0(0x42C8, 0));
 	radeon_ring_write(rdev, (1 << rdev->num_gb_pipes) - 1);
-	radeon_ring_write(rdev, PACKET0(R500_VAP_INDEX_OFFSET, 0));
+	radeon_ring_write(rdev, PACKET0(VAP_INDEX_OFFSET, 0));
 	radeon_ring_write(rdev, 0);
-	radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
-	radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);
-	radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
-	radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE);
-	radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
-	radeon_ring_write(rdev,
-			  RADEON_WAIT_2D_IDLECLEAN |
-			  RADEON_WAIT_3D_IDLECLEAN);
-	radeon_ring_write(rdev, PACKET0(R300_GB_AA_CONFIG, 0));
+	radeon_ring_write(rdev, PACKET0(RB3D_DSTCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, RB3D_DC_FLUSH | RB3D_DC_FREE);
+	radeon_ring_write(rdev, PACKET0(ZB_ZCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, ZC_FLUSH | ZC_FREE);
+	radeon_ring_write(rdev, PACKET0(WAIT_UNTIL, 0));
+	radeon_ring_write(rdev, WAIT_2D_IDLECLEAN | WAIT_3D_IDLECLEAN);
+	radeon_ring_write(rdev, PACKET0(GB_AA_CONFIG, 0));
 	radeon_ring_write(rdev, 0);
-	radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
-	radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);
-	radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
-	radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE);
-	radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS0, 0));
-	radeon_ring_write(rdev,
-			  ((6 << R300_MS_X0_SHIFT) |
-			   (6 << R300_MS_Y0_SHIFT) |
-			   (6 << R300_MS_X1_SHIFT) |
-			   (6 << R300_MS_Y1_SHIFT) |
-			   (6 << R300_MS_X2_SHIFT) |
-			   (6 << R300_MS_Y2_SHIFT) |
-			   (6 << R300_MSBD0_Y_SHIFT) |
-			   (6 << R300_MSBD0_X_SHIFT)));
-	radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS1, 0));
-	radeon_ring_write(rdev,
-			  ((6 << R300_MS_X3_SHIFT) |
-			   (6 << R300_MS_Y3_SHIFT) |
-			   (6 << R300_MS_X4_SHIFT) |
-			   (6 << R300_MS_Y4_SHIFT) |
-			   (6 << R300_MS_X5_SHIFT) |
-			   (6 << R300_MS_Y5_SHIFT) |
-			   (6 << R300_MSBD1_SHIFT)));
-	radeon_ring_write(rdev, PACKET0(R300_GA_ENHANCE, 0));
-	radeon_ring_write(rdev, R300_GA_DEADLOCK_CNTL | R300_GA_FASTSYNC_CNTL);
-	radeon_ring_write(rdev, PACKET0(R300_GA_POLY_MODE, 0));
+	radeon_ring_write(rdev, PACKET0(RB3D_DSTCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, RB3D_DC_FLUSH | RB3D_DC_FREE);
+	radeon_ring_write(rdev, PACKET0(ZB_ZCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, ZC_FLUSH | ZC_FREE);
+	radeon_ring_write(rdev, PACKET0(GB_MSPOS0, 0));
 	radeon_ring_write(rdev,
-			  R300_FRONT_PTYPE_TRIANGE | R300_BACK_PTYPE_TRIANGE);
-	radeon_ring_write(rdev, PACKET0(R300_GA_ROUND_MODE, 0));
+			  ((6 << MS_X0_SHIFT) |
+			   (6 << MS_Y0_SHIFT) |
+			   (6 << MS_X1_SHIFT) |
+			   (6 << MS_Y1_SHIFT) |
+			   (6 << MS_X2_SHIFT) |
+			   (6 << MS_Y2_SHIFT) |
+			   (6 << MSBD0_Y_SHIFT) |
+			   (6 << MSBD0_X_SHIFT)));
+	radeon_ring_write(rdev, PACKET0(GB_MSPOS1, 0));
 	radeon_ring_write(rdev,
-			  R300_GEOMETRY_ROUND_NEAREST |
-			  R300_COLOR_ROUND_NEAREST);
+			  ((6 << MS_X3_SHIFT) |
+			   (6 << MS_Y3_SHIFT) |
+			   (6 << MS_X4_SHIFT) |
+			   (6 << MS_Y4_SHIFT) |
+			   (6 << MS_X5_SHIFT) |
+			   (6 << MS_Y5_SHIFT) |
+			   (6 << MSBD1_SHIFT)));
+	radeon_ring_write(rdev, PACKET0(GA_ENHANCE, 0));
+	radeon_ring_write(rdev, GA_DEADLOCK_CNTL | GA_FASTSYNC_CNTL);
+	radeon_ring_write(rdev, PACKET0(GA_POLY_MODE, 0));
+	radeon_ring_write(rdev, FRONT_PTYPE_TRIANGE | BACK_PTYPE_TRIANGE);
+	radeon_ring_write(rdev, PACKET0(GA_ROUND_MODE, 0));
+	radeon_ring_write(rdev, GEOMETRY_ROUND_NEAREST | COLOR_ROUND_NEAREST);
 	radeon_ring_write(rdev, PACKET0(0x20C8, 0));
 	radeon_ring_write(rdev, 0);
 	radeon_ring_unlock_commit(rdev);
@@ -242,8 +215,8 @@ int rv515_mc_wait_for_idle(struct radeon_device *rdev)
 
 	for (i = 0; i < rdev->usec_timeout; i++) {
 		/* read MC_STATUS */
-		tmp = RREG32_MC(RV515_MC_STATUS);
-		if (tmp & RV515_MC_STATUS_IDLE) {
+		tmp = RREG32_MC(MC_STATUS);
+		if (tmp & MC_STATUS_IDLE) {
 			return 0;
 		}
 		DRM_UDELAY(1);
@@ -291,33 +264,33 @@ int rv515_ga_reset(struct radeon_device *rdev)
 	reinit_cp = rdev->cp.ready;
 	rdev->cp.ready = false;
 	for (i = 0; i < rdev->usec_timeout; i++) {
-		WREG32(RADEON_CP_CSQ_MODE, 0);
-		WREG32(RADEON_CP_CSQ_CNTL, 0);
-		WREG32(RADEON_RBBM_SOFT_RESET, 0x32005);
-		(void)RREG32(RADEON_RBBM_SOFT_RESET);
+		WREG32(CP_CSQ_MODE, 0);
+		WREG32(CP_CSQ_CNTL, 0);
+		WREG32(RBBM_SOFT_RESET, 0x32005);
+		(void)RREG32(RBBM_SOFT_RESET);
 		udelay(200);
-		WREG32(RADEON_RBBM_SOFT_RESET, 0);
+		WREG32(RBBM_SOFT_RESET, 0);
 		/* Wait to prevent race in RBBM_STATUS */
 		mdelay(1);
-		tmp = RREG32(RADEON_RBBM_STATUS);
+		tmp = RREG32(RBBM_STATUS);
 		if (tmp & ((1 << 20) | (1 << 26))) {
 			DRM_ERROR("VAP & CP still busy (RBBM_STATUS=0x%08X)\n", tmp);
 			/* GA still busy soft reset it */
 			WREG32(0x429C, 0x200);
-			WREG32(R300_VAP_PVS_STATE_FLUSH_REG, 0);
+			WREG32(VAP_PVS_STATE_FLUSH_REG, 0);
 			WREG32(0x43E0, 0);
 			WREG32(0x43E4, 0);
 			WREG32(0x24AC, 0);
 		}
 		/* Wait to prevent race in RBBM_STATUS */
 		mdelay(1);
-		tmp = RREG32(RADEON_RBBM_STATUS);
+		tmp = RREG32(RBBM_STATUS);
 		if (!(tmp & ((1 << 20) | (1 << 26)))) {
 			break;
 		}
 	}
 	for (i = 0; i < rdev->usec_timeout; i++) {
-		tmp = RREG32(RADEON_RBBM_STATUS);
+		tmp = RREG32(RBBM_STATUS);
 		if (!(tmp & ((1 << 20) | (1 << 26)))) {
 			DRM_INFO("GA reset succeed (RBBM_STATUS=0x%08X)\n",
 				 tmp);
@@ -331,7 +304,7 @@ int rv515_ga_reset(struct radeon_device *rdev)
 		}
 		DRM_UDELAY(1);
 	}
-	tmp = RREG32(RADEON_RBBM_STATUS);
+	tmp = RREG32(RBBM_STATUS);
 	DRM_ERROR("Failed to reset GA ! (RBBM_STATUS=0x%08X)\n", tmp);
 	return -1;
 }
@@ -341,7 +314,7 @@ int rv515_gpu_reset(struct radeon_device *rdev)
 	uint32_t status;
 
 	/* reset order likely matter */
-	status = RREG32(RADEON_RBBM_STATUS);
+	status = RREG32(RBBM_STATUS);
 	/* reset HDP */
 	r100_hdp_reset(rdev);
 	/* reset rb2d */
@@ -353,12 +326,12 @@ int rv515_gpu_reset(struct radeon_device *rdev)
 		rv515_ga_reset(rdev);
 	}
 	/* reset CP */
-	status = RREG32(RADEON_RBBM_STATUS);
+	status = RREG32(RBBM_STATUS);
 	if (status & (1 << 16)) {
 		r100_cp_reset(rdev);
 	}
 	/* Check if GPU is idle */
-	status = RREG32(RADEON_RBBM_STATUS);
+	status = RREG32(RBBM_STATUS);
 	if (status & (1 << 31)) {
 		DRM_ERROR("Failed to reset GPU (RBBM_STATUS=0x%08X)\n", status);
 		return -1;
@@ -377,8 +350,7 @@ static void rv515_vram_get_type(struct radeon_device *rdev)
 
 	rdev->mc.vram_width = 128;
 	rdev->mc.vram_is_ddr = true;
-	tmp = RREG32_MC(RV515_MC_CNTL);
-	tmp &= RV515_MEM_NUM_CHANNELS_MASK;
+	tmp = RREG32_MC(RV515_MC_CNTL) & MEM_NUM_CHANNELS_MASK;
 	switch (tmp) {
 	case 0:
 		rdev->mc.vram_width = 64;
@@ -394,11 +366,17 @@ static void rv515_vram_get_type(struct radeon_device *rdev)
 
 void rv515_vram_info(struct radeon_device *rdev)
 {
+	fixed20_12 a;
+
 	rv515_vram_get_type(rdev);
-	rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
 
-	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	r100_vram_init_sizes(rdev);
+	/* FIXME: we should enforce default clock in case GPU is not in
+	 * default setup
+	 */
+	a.full = rfixed_const(100);
+	rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+	rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
 }
 
 
@@ -409,38 +387,19 @@ uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg)
 {
 	uint32_t r;
 
-	WREG32(R520_MC_IND_INDEX, 0x7f0000 | (reg & 0xffff));
-	r = RREG32(R520_MC_IND_DATA);
-	WREG32(R520_MC_IND_INDEX, 0);
+	WREG32(MC_IND_INDEX, 0x7f0000 | (reg & 0xffff));
+	r = RREG32(MC_IND_DATA);
+	WREG32(MC_IND_INDEX, 0);
 	return r;
 }
 
 void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 {
-	WREG32(R520_MC_IND_INDEX, 0xff0000 | ((reg) & 0xffff));
-	WREG32(R520_MC_IND_DATA, (v));
-	WREG32(R520_MC_IND_INDEX, 0);
-}
-
-uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg)
-{
-	uint32_t r;
-
-	WREG32(RADEON_PCIE_INDEX, ((reg) & 0x7ff));
-	(void)RREG32(RADEON_PCIE_INDEX);
-	r = RREG32(RADEON_PCIE_DATA);
-	return r;
-}
-
-void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
-{
-	WREG32(RADEON_PCIE_INDEX, ((reg) & 0x7ff));
-	(void)RREG32(RADEON_PCIE_INDEX);
-	WREG32(RADEON_PCIE_DATA, (v));
-	(void)RREG32(RADEON_PCIE_DATA);
+	WREG32(MC_IND_INDEX, 0xff0000 | ((reg) & 0xffff));
+	WREG32(MC_IND_DATA, (v));
+	WREG32(MC_IND_INDEX, 0);
 }
 
-
 /*
  * Debugfs info
  */
@@ -452,13 +411,13 @@ static int rv515_debugfs_pipes_info(struct seq_file *m, void *data)
 	struct radeon_device *rdev = dev->dev_private;
 	uint32_t tmp;
 
-	tmp = RREG32(R400_GB_PIPE_SELECT);
+	tmp = RREG32(GB_PIPE_SELECT);
 	seq_printf(m, "GB_PIPE_SELECT 0x%08x\n", tmp);
-	tmp = RREG32(R500_SU_REG_DEST);
+	tmp = RREG32(SU_REG_DEST);
 	seq_printf(m, "SU_REG_DEST 0x%08x\n", tmp);
-	tmp = RREG32(R300_GB_TILE_CONFIG);
+	tmp = RREG32(GB_TILE_CONFIG);
 	seq_printf(m, "GB_TILE_CONFIG 0x%08x\n", tmp);
-	tmp = RREG32(R300_DST_PIPE_CONFIG);
+	tmp = RREG32(DST_PIPE_CONFIG);
 	seq_printf(m, "DST_PIPE_CONFIG 0x%08x\n", tmp);
 	return 0;
 }
@@ -509,9 +468,9 @@ int rv515_debugfs_ga_info_init(struct radeon_device *rdev)
 /*
  * Asic initialization
  */
-static const unsigned r500_reg_safe_bm[159] = {
+static const unsigned r500_reg_safe_bm[219] = {
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
@@ -549,14 +508,575 @@ static const unsigned r500_reg_safe_bm[159] = {
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFF80FFFF,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
-	0x0003FC01, 0x3FFFFCF8, 0xFE800B19,
+	0x0003FC01, 0x3FFFFCF8, 0xFF800B19, 0xFFDFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 };
 
-
-
 int rv515_init(struct radeon_device *rdev)
 {
 	rdev->config.r300.reg_safe_bm = r500_reg_safe_bm;
 	rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(r500_reg_safe_bm);
 	return 0;
 }
+
+void atom_rv515_force_tv_scaler(struct radeon_device *rdev)
+{
+
+	WREG32(0x659C, 0x0);
+	WREG32(0x6594, 0x705);
+	WREG32(0x65A4, 0x10001);
+	WREG32(0x65D8, 0x0);
+	WREG32(0x65B0, 0x0);
+	WREG32(0x65C0, 0x0);
+	WREG32(0x65D4, 0x0);
+	WREG32(0x6578, 0x0);
+	WREG32(0x657C, 0x841880A8);
+	WREG32(0x6578, 0x1);
+	WREG32(0x657C, 0x84208680);
+	WREG32(0x6578, 0x2);
+	WREG32(0x657C, 0xBFF880B0);
+	WREG32(0x6578, 0x100);
+	WREG32(0x657C, 0x83D88088);
+	WREG32(0x6578, 0x101);
+	WREG32(0x657C, 0x84608680);
+	WREG32(0x6578, 0x102);
+	WREG32(0x657C, 0xBFF080D0);
+	WREG32(0x6578, 0x200);
+	WREG32(0x657C, 0x83988068);
+	WREG32(0x6578, 0x201);
+	WREG32(0x657C, 0x84A08680);
+	WREG32(0x6578, 0x202);
+	WREG32(0x657C, 0xBFF080F8);
+	WREG32(0x6578, 0x300);
+	WREG32(0x657C, 0x83588058);
+	WREG32(0x6578, 0x301);
+	WREG32(0x657C, 0x84E08660);
+	WREG32(0x6578, 0x302);
+	WREG32(0x657C, 0xBFF88120);
+	WREG32(0x6578, 0x400);
+	WREG32(0x657C, 0x83188040);
+	WREG32(0x6578, 0x401);
+	WREG32(0x657C, 0x85008660);
+	WREG32(0x6578, 0x402);
+	WREG32(0x657C, 0xBFF88150);
+	WREG32(0x6578, 0x500);
+	WREG32(0x657C, 0x82D88030);
+	WREG32(0x6578, 0x501);
+	WREG32(0x657C, 0x85408640);
+	WREG32(0x6578, 0x502);
+	WREG32(0x657C, 0xBFF88180);
+	WREG32(0x6578, 0x600);
+	WREG32(0x657C, 0x82A08018);
+	WREG32(0x6578, 0x601);
+	WREG32(0x657C, 0x85808620);
+	WREG32(0x6578, 0x602);
+	WREG32(0x657C, 0xBFF081B8);
+	WREG32(0x6578, 0x700);
+	WREG32(0x657C, 0x82608010);
+	WREG32(0x6578, 0x701);
+	WREG32(0x657C, 0x85A08600);
+	WREG32(0x6578, 0x702);
+	WREG32(0x657C, 0x800081F0);
+	WREG32(0x6578, 0x800);
+	WREG32(0x657C, 0x8228BFF8);
+	WREG32(0x6578, 0x801);
+	WREG32(0x657C, 0x85E085E0);
+	WREG32(0x6578, 0x802);
+	WREG32(0x657C, 0xBFF88228);
+	WREG32(0x6578, 0x10000);
+	WREG32(0x657C, 0x82A8BF00);
+	WREG32(0x6578, 0x10001);
+	WREG32(0x657C, 0x82A08CC0);
+	WREG32(0x6578, 0x10002);
+	WREG32(0x657C, 0x8008BEF8);
+	WREG32(0x6578, 0x10100);
+	WREG32(0x657C, 0x81F0BF28);
+	WREG32(0x6578, 0x10101);
+	WREG32(0x657C, 0x83608CA0);
+	WREG32(0x6578, 0x10102);
+	WREG32(0x657C, 0x8018BED0);
+	WREG32(0x6578, 0x10200);
+	WREG32(0x657C, 0x8148BF38);
+	WREG32(0x6578, 0x10201);
+	WREG32(0x657C, 0x84408C80);
+	WREG32(0x6578, 0x10202);
+	WREG32(0x657C, 0x8008BEB8);
+	WREG32(0x6578, 0x10300);
+	WREG32(0x657C, 0x80B0BF78);
+	WREG32(0x6578, 0x10301);
+	WREG32(0x657C, 0x85008C20);
+	WREG32(0x6578, 0x10302);
+	WREG32(0x657C, 0x8020BEA0);
+	WREG32(0x6578, 0x10400);
+	WREG32(0x657C, 0x8028BF90);
+	WREG32(0x6578, 0x10401);
+	WREG32(0x657C, 0x85E08BC0);
+	WREG32(0x6578, 0x10402);
+	WREG32(0x657C, 0x8018BE90);
+	WREG32(0x6578, 0x10500);
+	WREG32(0x657C, 0xBFB8BFB0);
+	WREG32(0x6578, 0x10501);
+	WREG32(0x657C, 0x86C08B40);
+	WREG32(0x6578, 0x10502);
+	WREG32(0x657C, 0x8010BE90);
+	WREG32(0x6578, 0x10600);
+	WREG32(0x657C, 0xBF58BFC8);
+	WREG32(0x6578, 0x10601);
+	WREG32(0x657C, 0x87A08AA0);
+	WREG32(0x6578, 0x10602);
+	WREG32(0x657C, 0x8010BE98);
+	WREG32(0x6578, 0x10700);
+	WREG32(0x657C, 0xBF10BFF0);
+	WREG32(0x6578, 0x10701);
+	WREG32(0x657C, 0x886089E0);
+	WREG32(0x6578, 0x10702);
+	WREG32(0x657C, 0x8018BEB0);
+	WREG32(0x6578, 0x10800);
+	WREG32(0x657C, 0xBED8BFE8);
+	WREG32(0x6578, 0x10801);
+	WREG32(0x657C, 0x89408940);
+	WREG32(0x6578, 0x10802);
+	WREG32(0x657C, 0xBFE8BED8);
+	WREG32(0x6578, 0x20000);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20001);
+	WREG32(0x657C, 0x90008000);
+	WREG32(0x6578, 0x20002);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20003);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20100);
+	WREG32(0x657C, 0x80108000);
+	WREG32(0x6578, 0x20101);
+	WREG32(0x657C, 0x8FE0BF70);
+	WREG32(0x6578, 0x20102);
+	WREG32(0x657C, 0xBFE880C0);
+	WREG32(0x6578, 0x20103);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20200);
+	WREG32(0x657C, 0x8018BFF8);
+	WREG32(0x6578, 0x20201);
+	WREG32(0x657C, 0x8F80BF08);
+	WREG32(0x6578, 0x20202);
+	WREG32(0x657C, 0xBFD081A0);
+	WREG32(0x6578, 0x20203);
+	WREG32(0x657C, 0xBFF88000);
+	WREG32(0x6578, 0x20300);
+	WREG32(0x657C, 0x80188000);
+	WREG32(0x6578, 0x20301);
+	WREG32(0x657C, 0x8EE0BEC0);
+	WREG32(0x6578, 0x20302);
+	WREG32(0x657C, 0xBFB082A0);
+	WREG32(0x6578, 0x20303);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20400);
+	WREG32(0x657C, 0x80188000);
+	WREG32(0x6578, 0x20401);
+	WREG32(0x657C, 0x8E00BEA0);
+	WREG32(0x6578, 0x20402);
+	WREG32(0x657C, 0xBF8883C0);
+	WREG32(0x6578, 0x20403);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20500);
+	WREG32(0x657C, 0x80188000);
+	WREG32(0x6578, 0x20501);
+	WREG32(0x657C, 0x8D00BE90);
+	WREG32(0x6578, 0x20502);
+	WREG32(0x657C, 0xBF588500);
+	WREG32(0x6578, 0x20503);
+	WREG32(0x657C, 0x80008008);
+	WREG32(0x6578, 0x20600);
+	WREG32(0x657C, 0x80188000);
+	WREG32(0x6578, 0x20601);
+	WREG32(0x657C, 0x8BC0BE98);
+	WREG32(0x6578, 0x20602);
+	WREG32(0x657C, 0xBF308660);
+	WREG32(0x6578, 0x20603);
+	WREG32(0x657C, 0x80008008);
+	WREG32(0x6578, 0x20700);
+	WREG32(0x657C, 0x80108000);
+	WREG32(0x6578, 0x20701);
+	WREG32(0x657C, 0x8A80BEB0);
+	WREG32(0x6578, 0x20702);
+	WREG32(0x657C, 0xBF0087C0);
+	WREG32(0x6578, 0x20703);
+	WREG32(0x657C, 0x80008008);
+	WREG32(0x6578, 0x20800);
+	WREG32(0x657C, 0x80108000);
+	WREG32(0x6578, 0x20801);
+	WREG32(0x657C, 0x8920BED0);
+	WREG32(0x6578, 0x20802);
+	WREG32(0x657C, 0xBED08920);
+	WREG32(0x6578, 0x20803);
+	WREG32(0x657C, 0x80008010);
+	WREG32(0x6578, 0x30000);
+	WREG32(0x657C, 0x90008000);
+	WREG32(0x6578, 0x30001);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x30100);
+	WREG32(0x657C, 0x8FE0BF90);
+	WREG32(0x6578, 0x30101);
+	WREG32(0x657C, 0xBFF880A0);
+	WREG32(0x6578, 0x30200);
+	WREG32(0x657C, 0x8F60BF40);
+	WREG32(0x6578, 0x30201);
+	WREG32(0x657C, 0xBFE88180);
+	WREG32(0x6578, 0x30300);
+	WREG32(0x657C, 0x8EC0BF00);
+	WREG32(0x6578, 0x30301);
+	WREG32(0x657C, 0xBFC88280);
+	WREG32(0x6578, 0x30400);
+	WREG32(0x657C, 0x8DE0BEE0);
+	WREG32(0x6578, 0x30401);
+	WREG32(0x657C, 0xBFA083A0);
+	WREG32(0x6578, 0x30500);
+	WREG32(0x657C, 0x8CE0BED0);
+	WREG32(0x6578, 0x30501);
+	WREG32(0x657C, 0xBF7884E0);
+	WREG32(0x6578, 0x30600);
+	WREG32(0x657C, 0x8BA0BED8);
+	WREG32(0x6578, 0x30601);
+	WREG32(0x657C, 0xBF508640);
+	WREG32(0x6578, 0x30700);
+	WREG32(0x657C, 0x8A60BEE8);
+	WREG32(0x6578, 0x30701);
+	WREG32(0x657C, 0xBF2087A0);
+	WREG32(0x6578, 0x30800);
+	WREG32(0x657C, 0x8900BF00);
+	WREG32(0x6578, 0x30801);
+	WREG32(0x657C, 0xBF008900);
+}
+
+struct rv515_watermark {
+	u32        lb_request_fifo_depth;
+	fixed20_12 num_line_pair;
+	fixed20_12 estimated_width;
+	fixed20_12 worst_case_latency;
+	fixed20_12 consumption_rate;
+	fixed20_12 active_time;
+	fixed20_12 dbpp;
+	fixed20_12 priority_mark_max;
+	fixed20_12 priority_mark;
+	fixed20_12 sclk;
+};
+
+void rv515_crtc_bandwidth_compute(struct radeon_device *rdev,
+				  struct radeon_crtc *crtc,
+				  struct rv515_watermark *wm)
+{
+	struct drm_display_mode *mode = &crtc->base.mode;
+	fixed20_12 a, b, c;
+	fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width;
+	fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency;
+
+	if (!crtc->base.enabled) {
+		/* FIXME: wouldn't it better to set priority mark to maximum */
+		wm->lb_request_fifo_depth = 4;
+		return;
+	}
+
+	if (crtc->vsc.full > rfixed_const(2))
+		wm->num_line_pair.full = rfixed_const(2);
+	else
+		wm->num_line_pair.full = rfixed_const(1);
+
+	b.full = rfixed_const(mode->crtc_hdisplay);
+	c.full = rfixed_const(256);
+	a.full = rfixed_mul(wm->num_line_pair, b);
+	request_fifo_depth.full = rfixed_div(a, c);
+	if (a.full < rfixed_const(4)) {
+		wm->lb_request_fifo_depth = 4;
+	} else {
+		wm->lb_request_fifo_depth = rfixed_trunc(request_fifo_depth);
+	}
+
+	/* Determine consumption rate
+	 *  pclk = pixel clock period(ns) = 1000 / (mode.clock / 1000)
+	 *  vtaps = number of vertical taps,
+	 *  vsc = vertical scaling ratio, defined as source/destination
+	 *  hsc = horizontal scaling ration, defined as source/destination
+	 */
+	a.full = rfixed_const(mode->clock);
+	b.full = rfixed_const(1000);
+	a.full = rfixed_div(a, b);
+	pclk.full = rfixed_div(b, a);
+	if (crtc->rmx_type != RMX_OFF) {
+		b.full = rfixed_const(2);
+		if (crtc->vsc.full > b.full)
+			b.full = crtc->vsc.full;
+		b.full = rfixed_mul(b, crtc->hsc);
+		c.full = rfixed_const(2);
+		b.full = rfixed_div(b, c);
+		consumption_time.full = rfixed_div(pclk, b);
+	} else {
+		consumption_time.full = pclk.full;
+	}
+	a.full = rfixed_const(1);
+	wm->consumption_rate.full = rfixed_div(a, consumption_time);
+
+
+	/* Determine line time
+	 *  LineTime = total time for one line of displayhtotal
+	 *  LineTime = total number of horizontal pixels
+	 *  pclk = pixel clock period(ns)
+	 */
+	a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+	line_time.full = rfixed_mul(a, pclk);
+
+	/* Determine active time
+	 *  ActiveTime = time of active region of display within one line,
+	 *  hactive = total number of horizontal active pixels
+	 *  htotal = total number of horizontal pixels
+	 */
+	a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+	b.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+	wm->active_time.full = rfixed_mul(line_time, b);
+	wm->active_time.full = rfixed_div(wm->active_time, a);
+
+	/* Determine chunk time
+	 * ChunkTime = the time it takes the DCP to send one chunk of data
+	 * to the LB which consists of pipeline delay and inter chunk gap
+	 * sclk = system clock(Mhz)
+	 */
+	a.full = rfixed_const(600 * 1000);
+	chunk_time.full = rfixed_div(a, rdev->pm.sclk);
+	read_delay_latency.full = rfixed_const(1000);
+
+	/* Determine the worst case latency
+	 * NumLinePair = Number of line pairs to request(1=2 lines, 2=4 lines)
+	 * WorstCaseLatency = worst case time from urgent to when the MC starts
+	 *                    to return data
+	 * READ_DELAY_IDLE_MAX = constant of 1us
+	 * ChunkTime = time it takes the DCP to send one chunk of data to the LB
+	 *             which consists of pipeline delay and inter chunk gap
+	 */
+	if (rfixed_trunc(wm->num_line_pair) > 1) {
+		a.full = rfixed_const(3);
+		wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+		wm->worst_case_latency.full += read_delay_latency.full;
+	} else {
+		wm->worst_case_latency.full = chunk_time.full + read_delay_latency.full;
+	}
+
+	/* Determine the tolerable latency
+	 * TolerableLatency = Any given request has only 1 line time
+	 *                    for the data to be returned
+	 * LBRequestFifoDepth = Number of chunk requests the LB can
+	 *                      put into the request FIFO for a display
+	 *  LineTime = total time for one line of display
+	 *  ChunkTime = the time it takes the DCP to send one chunk
+	 *              of data to the LB which consists of
+	 *  pipeline delay and inter chunk gap
+	 */
+	if ((2+wm->lb_request_fifo_depth) >= rfixed_trunc(request_fifo_depth)) {
+		tolerable_latency.full = line_time.full;
+	} else {
+		tolerable_latency.full = rfixed_const(wm->lb_request_fifo_depth - 2);
+		tolerable_latency.full = request_fifo_depth.full - tolerable_latency.full;
+		tolerable_latency.full = rfixed_mul(tolerable_latency, chunk_time);
+		tolerable_latency.full = line_time.full - tolerable_latency.full;
+	}
+	/* We assume worst case 32bits (4 bytes) */
+	wm->dbpp.full = rfixed_const(2 * 16);
+
+	/* Determine the maximum priority mark
+	 *  width = viewport width in pixels
+	 */
+	a.full = rfixed_const(16);
+	wm->priority_mark_max.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+	wm->priority_mark_max.full = rfixed_div(wm->priority_mark_max, a);
+
+	/* Determine estimated width */
+	estimated_width.full = tolerable_latency.full - wm->worst_case_latency.full;
+	estimated_width.full = rfixed_div(estimated_width, consumption_time);
+	if (rfixed_trunc(estimated_width) > crtc->base.mode.crtc_hdisplay) {
+		wm->priority_mark.full = rfixed_const(10);
+	} else {
+		a.full = rfixed_const(16);
+		wm->priority_mark.full = rfixed_div(estimated_width, a);
+		wm->priority_mark.full = wm->priority_mark_max.full - wm->priority_mark.full;
+	}
+}
+
+void rv515_bandwidth_avivo_update(struct radeon_device *rdev)
+{
+	struct drm_display_mode *mode0 = NULL;
+	struct drm_display_mode *mode1 = NULL;
+	struct rv515_watermark wm0;
+	struct rv515_watermark wm1;
+	u32 tmp;
+	fixed20_12 priority_mark02, priority_mark12, fill_rate;
+	fixed20_12 a, b;
+
+	if (rdev->mode_info.crtcs[0]->base.enabled)
+		mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+	if (rdev->mode_info.crtcs[1]->base.enabled)
+		mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+	rs690_line_buffer_adjust(rdev, mode0, mode1);
+
+	rv515_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[0], &wm0);
+	rv515_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[1], &wm1);
+
+	tmp = wm0.lb_request_fifo_depth;
+	tmp |= wm1.lb_request_fifo_depth << 16;
+	WREG32(LB_MAX_REQ_OUTSTANDING, tmp);
+
+	if (mode0 && mode1) {
+		if (rfixed_trunc(wm0.dbpp) > 64)
+			a.full = rfixed_div(wm0.dbpp, wm0.num_line_pair);
+		else
+			a.full = wm0.num_line_pair.full;
+		if (rfixed_trunc(wm1.dbpp) > 64)
+			b.full = rfixed_div(wm1.dbpp, wm1.num_line_pair);
+		else
+			b.full = wm1.num_line_pair.full;
+		a.full += b.full;
+		fill_rate.full = rfixed_div(wm0.sclk, a);
+		if (wm0.consumption_rate.full > fill_rate.full) {
+			b.full = wm0.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm0.active_time);
+			a.full = rfixed_const(16);
+			b.full = rfixed_div(b, a);
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			priority_mark02.full = a.full + b.full;
+		} else {
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			b.full = rfixed_const(16 * 1000);
+			priority_mark02.full = rfixed_div(a, b);
+		}
+		if (wm1.consumption_rate.full > fill_rate.full) {
+			b.full = wm1.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm1.active_time);
+			a.full = rfixed_const(16);
+			b.full = rfixed_div(b, a);
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			priority_mark12.full = a.full + b.full;
+		} else {
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			b.full = rfixed_const(16 * 1000);
+			priority_mark12.full = rfixed_div(a, b);
+		}
+		if (wm0.priority_mark.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark.full;
+		if (rfixed_trunc(priority_mark02) < 0)
+			priority_mark02.full = 0;
+		if (wm0.priority_mark_max.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark_max.full;
+		if (wm1.priority_mark.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark.full;
+		if (rfixed_trunc(priority_mark12) < 0)
+			priority_mark12.full = 0;
+		if (wm1.priority_mark_max.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark_max.full;
+		WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+		WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+	} else if (mode0) {
+		if (rfixed_trunc(wm0.dbpp) > 64)
+			a.full = rfixed_div(wm0.dbpp, wm0.num_line_pair);
+		else
+			a.full = wm0.num_line_pair.full;
+		fill_rate.full = rfixed_div(wm0.sclk, a);
+		if (wm0.consumption_rate.full > fill_rate.full) {
+			b.full = wm0.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm0.active_time);
+			a.full = rfixed_const(16);
+			b.full = rfixed_div(b, a);
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			priority_mark02.full = a.full + b.full;
+		} else {
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			b.full = rfixed_const(16);
+			priority_mark02.full = rfixed_div(a, b);
+		}
+		if (wm0.priority_mark.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark.full;
+		if (rfixed_trunc(priority_mark02) < 0)
+			priority_mark02.full = 0;
+		if (wm0.priority_mark_max.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark_max.full;
+		WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+		WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+	} else {
+		if (rfixed_trunc(wm1.dbpp) > 64)
+			a.full = rfixed_div(wm1.dbpp, wm1.num_line_pair);
+		else
+			a.full = wm1.num_line_pair.full;
+		fill_rate.full = rfixed_div(wm1.sclk, a);
+		if (wm1.consumption_rate.full > fill_rate.full) {
+			b.full = wm1.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm1.active_time);
+			a.full = rfixed_const(16);
+			b.full = rfixed_div(b, a);
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			priority_mark12.full = a.full + b.full;
+		} else {
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			b.full = rfixed_const(16 * 1000);
+			priority_mark12.full = rfixed_div(a, b);
+		}
+		if (wm1.priority_mark.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark.full;
+		if (rfixed_trunc(priority_mark12) < 0)
+			priority_mark12.full = 0;
+		if (wm1.priority_mark_max.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark_max.full;
+		WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+		WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+		WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+		WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+	}
+}
+
+void rv515_bandwidth_update(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	struct drm_display_mode *mode0 = NULL;
+	struct drm_display_mode *mode1 = NULL;
+
+	if (rdev->mode_info.crtcs[0]->base.enabled)
+		mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+	if (rdev->mode_info.crtcs[1]->base.enabled)
+		mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+	/*
+	 * Set display0/1 priority up in the memory controller for
+	 * modes if the user specifies HIGH for displaypriority
+	 * option.
+	 */
+	if (rdev->disp_priority == 2) {
+		tmp = RREG32_MC(MC_MISC_LAT_TIMER);
+		tmp &= ~MC_DISP1R_INIT_LAT_MASK;
+		tmp &= ~MC_DISP0R_INIT_LAT_MASK;
+		if (mode1)
+			tmp |= (1 << MC_DISP1R_INIT_LAT_SHIFT);
+		if (mode0)
+			tmp |= (1 << MC_DISP0R_INIT_LAT_SHIFT);
+		WREG32_MC(MC_MISC_LAT_TIMER, tmp);
+	}
+	rv515_bandwidth_avivo_update(rdev);
+}
diff --git a/drivers/gpu/drm/radeon/rv515r.h b/drivers/gpu/drm/radeon/rv515r.h
new file mode 100644
index 00000000000..f3cf8403990
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rv515r.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef RV515R_H
+#define RV515R_H
+
+/* RV515 registers */
+#define PCIE_INDEX			0x0030
+#define PCIE_DATA			0x0034
+#define	MC_IND_INDEX			0x0070
+#define		MC_IND_WR_EN				(1 << 24)
+#define	MC_IND_DATA			0x0074
+#define	RBBM_SOFT_RESET			0x00F0
+#define	CONFIG_MEMSIZE			0x00F8
+#define HDP_FB_LOCATION			0x0134
+#define	CP_CSQ_CNTL			0x0740
+#define	CP_CSQ_MODE			0x0744
+#define	CP_CSQ_ADDR			0x07F0
+#define	CP_CSQ_DATA			0x07F4
+#define	CP_CSQ_STAT			0x07F8
+#define	CP_CSQ2_STAT			0x07FC
+#define	RBBM_STATUS			0x0E40
+#define	DST_PIPE_CONFIG			0x170C
+#define	WAIT_UNTIL			0x1720
+#define		WAIT_2D_IDLE				(1 << 14)
+#define		WAIT_3D_IDLE				(1 << 15)
+#define		WAIT_2D_IDLECLEAN			(1 << 16)
+#define		WAIT_3D_IDLECLEAN			(1 << 17)
+#define	ISYNC_CNTL			0x1724
+#define		ISYNC_ANY2D_IDLE3D			(1 << 0)
+#define		ISYNC_ANY3D_IDLE2D			(1 << 1)
+#define		ISYNC_TRIG2D_IDLE3D			(1 << 2)
+#define		ISYNC_TRIG3D_IDLE2D			(1 << 3)
+#define		ISYNC_WAIT_IDLEGUI			(1 << 4)
+#define		ISYNC_CPSCRATCH_IDLEGUI			(1 << 5)
+#define	VAP_INDEX_OFFSET		0x208C
+#define	VAP_PVS_STATE_FLUSH_REG		0x2284
+#define	GB_ENABLE			0x4008
+#define	GB_MSPOS0			0x4010
+#define		MS_X0_SHIFT				0
+#define		MS_Y0_SHIFT				4
+#define		MS_X1_SHIFT				8
+#define		MS_Y1_SHIFT				12
+#define		MS_X2_SHIFT				16
+#define		MS_Y2_SHIFT				20
+#define		MSBD0_Y_SHIFT				24
+#define		MSBD0_X_SHIFT				28
+#define	GB_MSPOS1			0x4014
+#define		MS_X3_SHIFT				0
+#define		MS_Y3_SHIFT				4
+#define		MS_X4_SHIFT				8
+#define		MS_Y4_SHIFT				12
+#define		MS_X5_SHIFT				16
+#define		MS_Y5_SHIFT				20
+#define		MSBD1_SHIFT				24
+#define GB_TILE_CONFIG			0x4018
+#define		ENABLE_TILING				(1 << 0)
+#define		PIPE_COUNT_MASK				0x0000000E
+#define		PIPE_COUNT_SHIFT			1
+#define		TILE_SIZE_8				(0 << 4)
+#define		TILE_SIZE_16				(1 << 4)
+#define		TILE_SIZE_32				(2 << 4)
+#define		SUBPIXEL_1_12				(0 << 16)
+#define		SUBPIXEL_1_16				(1 << 16)
+#define	GB_SELECT			0x401C
+#define	GB_AA_CONFIG			0x4020
+#define	GB_PIPE_SELECT			0x402C
+#define	GA_ENHANCE			0x4274
+#define		GA_DEADLOCK_CNTL			(1 << 0)
+#define		GA_FASTSYNC_CNTL			(1 << 1)
+#define	GA_POLY_MODE			0x4288
+#define		FRONT_PTYPE_POINT			(0 << 4)
+#define		FRONT_PTYPE_LINE			(1 << 4)
+#define		FRONT_PTYPE_TRIANGE			(2 << 4)
+#define		BACK_PTYPE_POINT			(0 << 7)
+#define		BACK_PTYPE_LINE				(1 << 7)
+#define		BACK_PTYPE_TRIANGE			(2 << 7)
+#define	GA_ROUND_MODE			0x428C
+#define		GEOMETRY_ROUND_TRUNC			(0 << 0)
+#define		GEOMETRY_ROUND_NEAREST			(1 << 0)
+#define		COLOR_ROUND_TRUNC			(0 << 2)
+#define		COLOR_ROUND_NEAREST			(1 << 2)
+#define	SU_REG_DEST			0x42C8
+#define	RB3D_DSTCACHE_CTLSTAT		0x4E4C
+#define		RB3D_DC_FLUSH				(2 << 0)
+#define		RB3D_DC_FREE				(2 << 2)
+#define		RB3D_DC_FINISH				(1 << 4)
+#define ZB_ZCACHE_CTLSTAT		0x4F18
+#define		ZC_FLUSH				(1 << 0)
+#define		ZC_FREE					(1 << 1)
+#define DC_LB_MEMORY_SPLIT		0x6520
+#define		DC_LB_MEMORY_SPLIT_MASK			0x00000003
+#define		DC_LB_MEMORY_SPLIT_SHIFT		0
+#define		DC_LB_MEMORY_SPLIT_D1HALF_D2HALF	0
+#define		DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q		1
+#define		DC_LB_MEMORY_SPLIT_D1_ONLY		2
+#define		DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q		3
+#define		DC_LB_MEMORY_SPLIT_SHIFT_MODE		(1 << 2)
+#define		DC_LB_DISP1_END_ADR_SHIFT		4
+#define		DC_LB_DISP1_END_ADR_MASK		0x00007FF0
+#define D1MODE_PRIORITY_A_CNT		0x6548
+#define		MODE_PRIORITY_MARK_MASK			0x00007FFF
+#define		MODE_PRIORITY_OFF			(1 << 16)
+#define		MODE_PRIORITY_ALWAYS_ON			(1 << 20)
+#define		MODE_PRIORITY_FORCE_MASK		(1 << 24)
+#define D1MODE_PRIORITY_B_CNT		0x654C
+#define LB_MAX_REQ_OUTSTANDING		0x6D58
+#define		LB_D1_MAX_REQ_OUTSTANDING_MASK		0x0000000F
+#define		LB_D1_MAX_REQ_OUTSTANDING_SHIFT		0
+#define		LB_D2_MAX_REQ_OUTSTANDING_MASK		0x000F0000
+#define		LB_D2_MAX_REQ_OUTSTANDING_SHIFT		16
+#define D2MODE_PRIORITY_A_CNT		0x6D48
+#define D2MODE_PRIORITY_B_CNT		0x6D4C
+
+/* ix[MC] registers */
+#define MC_FB_LOCATION			0x01
+#define		MC_FB_START_MASK			0x0000FFFF
+#define		MC_FB_START_SHIFT			0
+#define		MC_FB_TOP_MASK				0xFFFF0000
+#define		MC_FB_TOP_SHIFT				16
+#define MC_AGP_LOCATION			0x02
+#define		MC_AGP_START_MASK			0x0000FFFF
+#define		MC_AGP_START_SHIFT			0
+#define		MC_AGP_TOP_MASK				0xFFFF0000
+#define		MC_AGP_TOP_SHIFT			16
+#define MC_AGP_BASE			0x03
+#define MC_AGP_BASE_2			0x04
+#define	MC_CNTL				0x5
+#define		MEM_NUM_CHANNELS_MASK			0x00000003
+#define	MC_STATUS			0x08
+#define		MC_STATUS_IDLE				(1 << 4)
+#define	MC_MISC_LAT_TIMER		0x09
+#define		MC_CPR_INIT_LAT_MASK			0x0000000F
+#define		MC_VF_INIT_LAT_MASK			0x000000F0
+#define		MC_DISP0R_INIT_LAT_MASK			0x00000F00
+#define		MC_DISP0R_INIT_LAT_SHIFT		8
+#define		MC_DISP1R_INIT_LAT_MASK			0x0000F000
+#define		MC_DISP1R_INIT_LAT_SHIFT		12
+#define		MC_FIXED_INIT_LAT_MASK			0x000F0000
+#define		MC_E2R_INIT_LAT_MASK			0x00F00000
+#define		SAME_PAGE_PRIO_MASK			0x0F000000
+#define		MC_GLOBW_INIT_LAT_MASK			0xF0000000
+
+
+#endif
+
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index da50cc51ede..21d8ffd5730 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -67,7 +67,7 @@ int rv770_mc_init(struct radeon_device *rdev)
 		       "programming pipes. Bad things might happen.\n");
 	}
 
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	tmp = REG_SET(R700_MC_FB_TOP, tmp >> 24);
 	tmp |= REG_SET(R700_MC_FB_BASE, rdev->mc.vram_location >> 24);
 	WREG32(R700_MC_VM_FB_LOCATION, tmp);
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index c1c407f7cca..c2b0d710d10 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -43,7 +43,6 @@
 #define TTM_BO_HASH_ORDER 13
 
 static int ttm_bo_setup_vm(struct ttm_buffer_object *bo);
-static void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo);
 static int ttm_bo_swapout(struct ttm_mem_shrink *shrink);
 
 static inline uint32_t ttm_bo_type_flags(unsigned type)
@@ -224,6 +223,9 @@ static int ttm_bo_add_ttm(struct ttm_buffer_object *bo, bool zero_alloc)
 	TTM_ASSERT_LOCKED(&bo->mutex);
 	bo->ttm = NULL;
 
+	if (bdev->need_dma32)
+		page_flags |= TTM_PAGE_FLAG_DMA32;
+
 	switch (bo->type) {
 	case ttm_bo_type_device:
 		if (zero_alloc)
@@ -304,6 +306,9 @@ static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo,
 
 	}
 
+	if (bdev->driver->move_notify)
+		bdev->driver->move_notify(bo, mem);
+
 	if (!(old_man->flags & TTM_MEMTYPE_FLAG_FIXED) &&
 	    !(new_man->flags & TTM_MEMTYPE_FLAG_FIXED))
 		ret = ttm_bo_move_ttm(bo, evict, no_wait, mem);
@@ -655,31 +660,52 @@ retry_pre_get:
 	return 0;
 }
 
+static uint32_t ttm_bo_select_caching(struct ttm_mem_type_manager *man,
+				      uint32_t cur_placement,
+				      uint32_t proposed_placement)
+{
+	uint32_t caching = proposed_placement & TTM_PL_MASK_CACHING;
+	uint32_t result = proposed_placement & ~TTM_PL_MASK_CACHING;
+
+	/**
+	 * Keep current caching if possible.
+	 */
+
+	if ((cur_placement & caching) != 0)
+		result |= (cur_placement & caching);
+	else if ((man->default_caching & caching) != 0)
+		result |= man->default_caching;
+	else if ((TTM_PL_FLAG_CACHED & caching) != 0)
+		result |= TTM_PL_FLAG_CACHED;
+	else if ((TTM_PL_FLAG_WC & caching) != 0)
+		result |= TTM_PL_FLAG_WC;
+	else if ((TTM_PL_FLAG_UNCACHED & caching) != 0)
+		result |= TTM_PL_FLAG_UNCACHED;
+
+	return result;
+}
+
+
 static bool ttm_bo_mt_compatible(struct ttm_mem_type_manager *man,
 				 bool disallow_fixed,
 				 uint32_t mem_type,
-				 uint32_t mask, uint32_t *res_mask)
+				 uint32_t proposed_placement,
+				 uint32_t *masked_placement)
 {
 	uint32_t cur_flags = ttm_bo_type_flags(mem_type);
 
 	if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) && disallow_fixed)
 		return false;
 
-	if ((cur_flags & mask & TTM_PL_MASK_MEM) == 0)
+	if ((cur_flags & proposed_placement & TTM_PL_MASK_MEM) == 0)
 		return false;
 
-	if ((mask & man->available_caching) == 0)
+	if ((proposed_placement & man->available_caching) == 0)
 		return false;
-	if (mask & man->default_caching)
-		cur_flags |= man->default_caching;
-	else if (mask & TTM_PL_FLAG_CACHED)
-		cur_flags |= TTM_PL_FLAG_CACHED;
-	else if (mask & TTM_PL_FLAG_WC)
-		cur_flags |= TTM_PL_FLAG_WC;
-	else
-		cur_flags |= TTM_PL_FLAG_UNCACHED;
 
-	*res_mask = cur_flags;
+	cur_flags |= (proposed_placement & man->available_caching);
+
+	*masked_placement = cur_flags;
 	return true;
 }
 
@@ -723,6 +749,9 @@ int ttm_bo_mem_space(struct ttm_buffer_object *bo,
 		if (!type_ok)
 			continue;
 
+		cur_flags = ttm_bo_select_caching(man, bo->mem.placement,
+						  cur_flags);
+
 		if (mem_type == TTM_PL_SYSTEM)
 			break;
 
@@ -779,6 +808,9 @@ int ttm_bo_mem_space(struct ttm_buffer_object *bo,
 					  proposed_placement, &cur_flags))
 			continue;
 
+		cur_flags = ttm_bo_select_caching(man, bo->mem.placement,
+						  cur_flags);
+
 		ret = ttm_bo_mem_force_space(bdev, mem, mem_type,
 					     interruptible, no_wait);
 
@@ -1150,13 +1182,14 @@ static int ttm_bo_force_list_clean(struct ttm_bo_device *bdev,
 
 int ttm_bo_clean_mm(struct ttm_bo_device *bdev, unsigned mem_type)
 {
-	struct ttm_mem_type_manager *man = &bdev->man[mem_type];
+	struct ttm_mem_type_manager *man;
 	int ret = -EINVAL;
 
 	if (mem_type >= TTM_NUM_MEM_TYPES) {
 		printk(KERN_ERR TTM_PFX "Illegal memory type %d\n", mem_type);
 		return ret;
 	}
+	man = &bdev->man[mem_type];
 
 	if (!man->has_type) {
 		printk(KERN_ERR TTM_PFX "Trying to take down uninitialized "
@@ -1305,7 +1338,8 @@ EXPORT_SYMBOL(ttm_bo_device_release);
 
 int ttm_bo_device_init(struct ttm_bo_device *bdev,
 		       struct ttm_mem_global *mem_glob,
-		       struct ttm_bo_driver *driver, uint64_t file_page_offset)
+		       struct ttm_bo_driver *driver, uint64_t file_page_offset,
+		       bool need_dma32)
 {
 	int ret = -EINVAL;
 
@@ -1342,6 +1376,7 @@ int ttm_bo_device_init(struct ttm_bo_device *bdev,
 	INIT_LIST_HEAD(&bdev->ddestroy);
 	INIT_LIST_HEAD(&bdev->swap_lru);
 	bdev->dev_mapping = NULL;
+	bdev->need_dma32 = need_dma32;
 	ttm_mem_init_shrink(&bdev->shrink, ttm_bo_swapout);
 	ret = ttm_mem_register_shrink(mem_glob, &bdev->shrink);
 	if (unlikely(ret != 0)) {
@@ -1419,6 +1454,7 @@ void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo)
 
 	unmap_mapping_range(bdev->dev_mapping, offset, holelen, 1);
 }
+EXPORT_SYMBOL(ttm_bo_unmap_virtual);
 
 static void ttm_bo_vm_insert_rb(struct ttm_buffer_object *bo)
 {
@@ -1540,6 +1576,10 @@ int ttm_bo_wait(struct ttm_buffer_object *bo,
 			driver->sync_obj_unref(&sync_obj);
 			driver->sync_obj_unref(&tmp_obj);
 			spin_lock(&bo->lock);
+		} else {
+			spin_unlock(&bo->lock);
+			driver->sync_obj_unref(&sync_obj);
+			spin_lock(&bo->lock);
 		}
 	}
 	return 0;
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index 517c8455963..ad4ada07c6c 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -34,7 +34,6 @@
 #include <linux/highmem.h>
 #include <linux/wait.h>
 #include <linux/vmalloc.h>
-#include <linux/version.h>
 #include <linux/module.h>
 
 void ttm_bo_free_old_node(struct ttm_buffer_object *bo)
@@ -137,7 +136,8 @@ static int ttm_copy_io_page(void *dst, void *src, unsigned long page)
 }
 
 static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src,
-				unsigned long page)
+				unsigned long page,
+				pgprot_t prot)
 {
 	struct page *d = ttm_tt_get_page(ttm, page);
 	void *dst;
@@ -146,17 +146,35 @@ static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src,
 		return -ENOMEM;
 
 	src = (void *)((unsigned long)src + (page << PAGE_SHIFT));
-	dst = kmap(d);
+
+#ifdef CONFIG_X86
+	dst = kmap_atomic_prot(d, KM_USER0, prot);
+#else
+	if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
+		dst = vmap(&d, 1, 0, prot);
+	else
+		dst = kmap(d);
+#endif
 	if (!dst)
 		return -ENOMEM;
 
 	memcpy_fromio(dst, src, PAGE_SIZE);
-	kunmap(d);
+
+#ifdef CONFIG_X86
+	kunmap_atomic(dst, KM_USER0);
+#else
+	if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
+		vunmap(dst);
+	else
+		kunmap(d);
+#endif
+
 	return 0;
 }
 
 static int ttm_copy_ttm_io_page(struct ttm_tt *ttm, void *dst,
-				unsigned long page)
+				unsigned long page,
+				pgprot_t prot)
 {
 	struct page *s = ttm_tt_get_page(ttm, page);
 	void *src;
@@ -165,12 +183,28 @@ static int ttm_copy_ttm_io_page(struct ttm_tt *ttm, void *dst,
 		return -ENOMEM;
 
 	dst = (void *)((unsigned long)dst + (page << PAGE_SHIFT));
-	src = kmap(s);
+#ifdef CONFIG_X86
+	src = kmap_atomic_prot(s, KM_USER0, prot);
+#else
+	if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
+		src = vmap(&s, 1, 0, prot);
+	else
+		src = kmap(s);
+#endif
 	if (!src)
 		return -ENOMEM;
 
 	memcpy_toio(dst, src, PAGE_SIZE);
-	kunmap(s);
+
+#ifdef CONFIG_X86
+	kunmap_atomic(src, KM_USER0);
+#else
+	if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
+		vunmap(src);
+	else
+		kunmap(s);
+#endif
+
 	return 0;
 }
 
@@ -215,11 +249,17 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo,
 
 	for (i = 0; i < new_mem->num_pages; ++i) {
 		page = i * dir + add;
-		if (old_iomap == NULL)
-			ret = ttm_copy_ttm_io_page(ttm, new_iomap, page);
-		else if (new_iomap == NULL)
-			ret = ttm_copy_io_ttm_page(ttm, old_iomap, page);
-		else
+		if (old_iomap == NULL) {
+			pgprot_t prot = ttm_io_prot(old_mem->placement,
+						    PAGE_KERNEL);
+			ret = ttm_copy_ttm_io_page(ttm, new_iomap, page,
+						   prot);
+		} else if (new_iomap == NULL) {
+			pgprot_t prot = ttm_io_prot(new_mem->placement,
+						    PAGE_KERNEL);
+			ret = ttm_copy_io_ttm_page(ttm, old_iomap, page,
+						   prot);
+		} else
 			ret = ttm_copy_io_page(new_iomap, old_iomap, page);
 		if (ret)
 			goto out1;
@@ -510,8 +550,8 @@ int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo,
 	if (evict) {
 		ret = ttm_bo_wait(bo, false, false, false);
 		spin_unlock(&bo->lock);
-		driver->sync_obj_unref(&bo->sync_obj);
-
+		if (tmp_obj)
+			driver->sync_obj_unref(&tmp_obj);
 		if (ret)
 			return ret;
 
@@ -533,6 +573,8 @@ int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo,
 
 		set_bit(TTM_BO_PRIV_FLAG_MOVING, &bo->priv_flags);
 		spin_unlock(&bo->lock);
+		if (tmp_obj)
+			driver->sync_obj_unref(&tmp_obj);
 
 		ret = ttm_buffer_object_transfer(bo, &ghost_obj);
 		if (ret)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c
index 27b146c54fb..33de7637c0c 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_vm.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c
@@ -32,7 +32,6 @@
 #include <ttm/ttm_bo_driver.h>
 #include <ttm/ttm_placement.h>
 #include <linux/mm.h>
-#include <linux/version.h>
 #include <linux/rbtree.h>
 #include <linux/module.h>
 #include <linux/uaccess.h>
@@ -102,6 +101,9 @@ static int ttm_bo_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 		return VM_FAULT_NOPAGE;
 	}
 
+	if (bdev->driver->fault_reserve_notify)
+		bdev->driver->fault_reserve_notify(bo);
+
 	/*
 	 * Wait for buffer data in transit, due to a pipelined
 	 * move.
@@ -328,7 +330,7 @@ ssize_t ttm_bo_io(struct ttm_bo_device *bdev, struct file *filp,
 		goto out_unref;
 
 	kmap_offset = dev_offset - bo->vm_node->start;
-	if (unlikely(kmap_offset) >= bo->num_pages) {
+	if (unlikely(kmap_offset >= bo->num_pages)) {
 		ret = -EFBIG;
 		goto out_unref;
 	}
@@ -402,7 +404,7 @@ ssize_t ttm_bo_fbdev_io(struct ttm_buffer_object *bo, const char __user *wbuf,
 	bool dummy;
 
 	kmap_offset = (*f_pos >> PAGE_SHIFT);
-	if (unlikely(kmap_offset) >= bo->num_pages)
+	if (unlikely(kmap_offset >= bo->num_pages))
 		return -EFBIG;
 
 	page_offset = *f_pos & ~PAGE_MASK;
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 0331fa74cd3..b8b6c4a5f98 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -28,7 +28,6 @@
  * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
  */
 
-#include <linux/version.h>
 #include <linux/vmalloc.h>
 #include <linux/sched.h>
 #include <linux/highmem.h>
@@ -87,10 +86,16 @@ void ttm_tt_cache_flush(struct page *pages[], unsigned long num_pages)
 	unsigned long i;
 
 	for (i = 0; i < num_pages; ++i) {
-		if (pages[i]) {
-			unsigned long start = (unsigned long)page_address(pages[i]);
-			flush_dcache_range(start, start + PAGE_SIZE);
-		}
+		struct page *page = pages[i];
+		void *page_virtual;
+
+		if (unlikely(page == NULL))
+			continue;
+
+		page_virtual = kmap_atomic(page, KM_USER0);
+		flush_dcache_range((unsigned long) page_virtual,
+				   (unsigned long) page_virtual + PAGE_SIZE);
+		kunmap_atomic(page_virtual, KM_USER0);
 	}
 #else
 	if (on_each_cpu(ttm_tt_ipi_handler, NULL, 1) != 0)
@@ -132,10 +137,17 @@ static void ttm_tt_free_page_directory(struct ttm_tt *ttm)
 
 static struct page *ttm_tt_alloc_page(unsigned page_flags)
 {
+	gfp_t gfp_flags = GFP_USER;
+
 	if (page_flags & TTM_PAGE_FLAG_ZERO_ALLOC)
-		return alloc_page(GFP_HIGHUSER | __GFP_ZERO);
+		gfp_flags |= __GFP_ZERO;
+
+	if (page_flags & TTM_PAGE_FLAG_DMA32)
+		gfp_flags |= __GFP_DMA32;
+	else
+		gfp_flags |= __GFP_HIGHMEM;
 
-	return alloc_page(GFP_HIGHUSER);
+	return alloc_page(gfp_flags);
 }
 
 static void ttm_tt_free_user_pages(struct ttm_tt *ttm)
diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c
index c248c1d3726..5935b8842e8 100644
--- a/drivers/gpu/drm/via/via_irq.c
+++ b/drivers/gpu/drm/via/via_irq.c
@@ -183,7 +183,7 @@ int via_enable_vblank(struct drm_device *dev, int crtc)
 	}
 
 	status = VIA_READ(VIA_REG_INTERRUPT);
-	VIA_WRITE(VIA_REG_INTERRUPT, status & VIA_IRQ_VBLANK_ENABLE);
+	VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_VBLANK_ENABLE);
 
 	VIA_WRITE8(0x83d4, 0x11);
 	VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) | 0x30);
@@ -194,6 +194,10 @@ int via_enable_vblank(struct drm_device *dev, int crtc)
 void via_disable_vblank(struct drm_device *dev, int crtc)
 {
 	drm_via_private_t *dev_priv = dev->dev_private;
+	u32 status;
+
+	status = VIA_READ(VIA_REG_INTERRUPT);
+	VIA_WRITE(VIA_REG_INTERRUPT, status & ~VIA_IRQ_VBLANK_ENABLE);
 
 	VIA_WRITE8(0x83d4, 0x11);
 	VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) & ~0x30);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index f2c21d5d24e..5eb10c2ce66 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1075,14 +1075,16 @@ EXPORT_SYMBOL_GPL(hid_report_raw_event);
  */
 int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int interrupt)
 {
-	struct hid_report_enum *report_enum = hid->report_enum + type;
-	struct hid_driver *hdrv = hid->driver;
+	struct hid_report_enum *report_enum;
+	struct hid_driver *hdrv;
 	struct hid_report *report;
 	unsigned int i;
 	int ret;
 
 	if (!hid || !hid->driver)
 		return -ENODEV;
+	report_enum = hid->report_enum + type;
+	hdrv = hid->driver;
 
 	if (!size) {
 		dbg_hid("empty report\n");
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 76c4bbe9dcc..3c1fcb7640a 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -22,7 +22,6 @@
 #include <linux/list.h>
 #include <linux/mm.h>
 #include <linux/mutex.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <asm/unaligned.h>
 #include <asm/byteorder.h>
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 9e9421525fb..215b2addddb 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -527,8 +527,10 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd,
 			goto goodreturn;
 
 		case HIDIOCGCOLLECTIONINDEX:
+			i = field->usage[uref->usage_index].collection_index;
+			unlock_kernel();
 			kfree(uref_multi);
-			return field->usage[uref->usage_index].collection_index;
+			return i;
 		case HIDIOCGUSAGES:
 			for (i = 0; i < uref_multi->num_values; i++)
 				uref_multi->values[i] =
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index ad2b3431b72..7d3f15d32fd 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -357,7 +357,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX5 Fan",		39, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0014, NULL /* Abit AB9 Pro, need DMI string */, {
+	{ 0x0014, "AB9", /* + AB9 Pro */ {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -455,7 +455,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 FAN",		37, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0018, NULL /* Unknown, need DMI string */, {
+	{ 0x0018, "AB9 QuadGT", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -564,7 +564,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001C, NULL /* Unknown, need DMI string */, {
+	{ 0x001C, "IX38 QuadGT", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index bff0103610c..fe4fa29c921 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -593,7 +593,11 @@ static int atk_add_sensor(struct atk_data *data, union acpi_object *obj)
 	sensor->data = data;
 	sensor->id = flags->integer.value;
 	sensor->limit1 = limit1->integer.value;
-	sensor->limit2 = limit2->integer.value;
+	if (data->old_interface)
+		sensor->limit2 = limit2->integer.value;
+	else
+		/* The upper limit is expressed as delta from lower limit */
+		sensor->limit2 = sensor->limit1 + limit2->integer.value;
 
 	snprintf(sensor->input_attr_name, ATTR_NAME_SIZE,
 			"%s%d_input", base_name, start + *num);
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index 86142a85823..58f66be61b1 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -418,6 +418,7 @@ static ssize_t set_div(struct device *dev, struct device_attribute *devattr,
 		data->count = 3;
 		break;
 	default:
+		mutex_unlock(&data->update_lock);
 		dev_err(&client->dev,
 			"illegal value for fan divider (%d)\n", div);
 		return -EINVAL;
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 56cd6004da3..6290a259456 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -257,7 +257,7 @@ static inline int sht15_update_single_val(struct sht15_data *data,
 				 (data->flag == SHT15_READING_NOTHING),
 				 msecs_to_jiffies(timeout_msecs));
 	if (ret == 0) {/* timeout occurred */
-		disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));;
+		disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
 		sht15_connection_reset(data);
 		return -ETIME;
 	}
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index a92dbb97ee9..ba75bfcf14c 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -86,6 +86,7 @@ superio_exit(void)
 #define SUPERIO_REG_ACT		0x30
 #define SUPERIO_REG_BASE	0x60
 #define SUPERIO_REG_DEVID	0x20
+#define SUPERIO_REG_DEVREV	0x21
 
 /* Logical device registers */
 
@@ -429,6 +430,9 @@ static int __init smsc47m1_find(unsigned short *addr,
 	 * The LPC47M292 (device id 0x6B) is somewhat compatible, but it
 	 * supports a 3rd fan, and the pin configuration registers are
 	 * unfortunately different.
+	 * The LPC47M233 has the same device id (0x6B) but is not compatible.
+	 * We check the high bit of the device revision register to
+	 * differentiate them.
 	 */
 	switch (val) {
 	case 0x51:
@@ -448,6 +452,13 @@ static int __init smsc47m1_find(unsigned short *addr,
 		sio_data->type = smsc47m1;
 		break;
 	case 0x6B:
+		if (superio_inb(SUPERIO_REG_DEVREV) & 0x80) {
+			pr_debug(DRVNAME ": "
+				 "Found SMSC LPC47M233, unsupported\n");
+			superio_exit();
+			return -ENODEV;
+		}
+
 		pr_info(DRVNAME ": Found SMSC LPC47M292\n");
 		sio_data->type = smsc47m2;
 		break;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index aa87b6a3bbe..8206442fbab 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -328,6 +328,7 @@ config I2C_DAVINCI
 
 config I2C_DESIGNWARE
 	tristate "Synopsys DesignWare"
+	depends on HAVE_CLK
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 3fae3a91ce5..c89687a1083 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -187,6 +187,11 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh);
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl);
 
+	/* Respond at reserved "SMBus Host" slave address" (and zero);
+	 * we seem to have no option to not respond...
+	 */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_OAR_REG, 0x08);
+
 	dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
 	dev_dbg(dev->dev, "PSC  = %d\n",
 		davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG));
@@ -387,7 +392,7 @@ static void terminate_write(struct davinci_i2c_dev *dev)
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
 
 	if (!dev->terminate)
-		dev_err(dev->dev, "TDR IRQ while no data to send\n");
+		dev_dbg(dev->dev, "TDR IRQ while no data to send\n");
 }
 
 /*
@@ -473,9 +478,14 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
 			break;
 
 		case DAVINCI_I2C_IVR_AAS:
-			dev_warn(dev->dev, "Address as slave interrupt\n");
-		}/* switch */
-	}/* while */
+			dev_dbg(dev->dev, "Address as slave interrupt\n");
+			break;
+
+		default:
+			dev_warn(dev->dev, "Unrecognized irq stat %d\n", stat);
+			break;
+		}
+	}
 
 	return count ? IRQ_HANDLED : IRQ_NONE;
 }
@@ -505,7 +515,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
+	ioarea = request_mem_region(mem->start, resource_size(mem),
 				    pdev->name);
 	if (!ioarea) {
 		dev_err(&pdev->dev, "I2C region already claimed\n");
@@ -523,7 +533,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	dev->irq = irq->start;
 	platform_set_drvdata(pdev, dev);
 
-	dev->clk = clk_get(&pdev->dev, "I2CCLK");
+	dev->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk)) {
 		r = -ENODEV;
 		goto err_free_mem;
@@ -568,7 +578,7 @@ err_free_mem:
 	put_device(&pdev->dev);
 	kfree(dev);
 err_release_region:
-	release_mem_region(mem->start, (mem->end - mem->start) + 1);
+	release_mem_region(mem->start, resource_size(mem));
 
 	return r;
 }
@@ -591,7 +601,7 @@ static int davinci_i2c_remove(struct platform_device *pdev)
 	kfree(dev);
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem->start, (mem->end - mem->start) + 1);
+	release_mem_region(mem->start, resource_size(mem));
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index e4476743f20..b1bc6e277d2 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -85,10 +85,11 @@ static void dump_iic_regs(const char* header, struct ibm_iic_private* dev)
 {
 	volatile struct iic_regs __iomem *iic = dev->vaddr;
 	printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header);
-	printk(KERN_DEBUG "  cntl     = 0x%02x, mdcntl = 0x%02x\n"
-	       KERN_DEBUG "  sts      = 0x%02x, extsts = 0x%02x\n"
-	       KERN_DEBUG "  clkdiv   = 0x%02x, xfrcnt = 0x%02x\n"
-	       KERN_DEBUG "  xtcntlss = 0x%02x, directcntl = 0x%02x\n",
+	printk(KERN_DEBUG
+	       "  cntl     = 0x%02x, mdcntl = 0x%02x\n"
+	       "  sts      = 0x%02x, extsts = 0x%02x\n"
+	       "  clkdiv   = 0x%02x, xfrcnt = 0x%02x\n"
+	       "  xtcntlss = 0x%02x, directcntl = 0x%02x\n",
 		in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts),
 		in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt),
 		in_8(&iic->xtcntlss), in_8(&iic->directcntl));
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index ad8d2010c92..827da085813 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -672,9 +672,17 @@ omap_i2c_isr(int this_irq, void *dev_id)
 			break;
 		}
 
-		omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
-
 		err = 0;
+complete:
+		/*
+		 * Ack the stat in one go, but [R/X]DR and [R/X]RDY should be
+		 * acked after the data operation is complete.
+		 * Ref: TRM SWPU114Q Figure 18-31
+		 */
+		omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat &
+				~(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
+				OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+
 		if (stat & OMAP_I2C_STAT_NACK) {
 			err |= OMAP_I2C_STAT_NACK;
 			omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
@@ -685,16 +693,22 @@ omap_i2c_isr(int this_irq, void *dev_id)
 			err |= OMAP_I2C_STAT_AL;
 		}
 		if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
-					OMAP_I2C_STAT_AL))
+					OMAP_I2C_STAT_AL)) {
+			omap_i2c_ack_stat(dev, stat &
+				(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
+				OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
 			omap_i2c_complete_cmd(dev, err);
+			return IRQ_HANDLED;
+		}
 		if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
 			u8 num_bytes = 1;
 			if (dev->fifo_size) {
 				if (stat & OMAP_I2C_STAT_RRDY)
 					num_bytes = dev->fifo_size;
-				else
-					num_bytes = omap_i2c_read_reg(dev,
-							OMAP_I2C_BUFSTAT_REG);
+				else    /* read RXSTAT on RDR interrupt */
+					num_bytes = (omap_i2c_read_reg(dev,
+							OMAP_I2C_BUFSTAT_REG)
+							>> 8) & 0x3F;
 			}
 			while (num_bytes) {
 				num_bytes--;
@@ -731,9 +745,10 @@ omap_i2c_isr(int this_irq, void *dev_id)
 			if (dev->fifo_size) {
 				if (stat & OMAP_I2C_STAT_XRDY)
 					num_bytes = dev->fifo_size;
-				else
+				else    /* read TXSTAT on XDR interrupt */
 					num_bytes = omap_i2c_read_reg(dev,
-							OMAP_I2C_BUFSTAT_REG);
+							OMAP_I2C_BUFSTAT_REG)
+							& 0x3F;
 			}
 			while (num_bytes) {
 				num_bytes--;
@@ -760,6 +775,27 @@ omap_i2c_isr(int this_irq, void *dev_id)
 							"data to send\n");
 					break;
 				}
+
+				/*
+				 * OMAP3430 Errata 1.153: When an XRDY/XDR
+				 * is hit, wait for XUDF before writing data
+				 * to DATA_REG. Otherwise some data bytes can
+				 * be lost while transferring them from the
+				 * memory to the I2C interface.
+				 */
+
+				if (dev->rev <= OMAP_I2C_REV_ON_3430) {
+						while (!(stat & OMAP_I2C_STAT_XUDF)) {
+							if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
+								omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+								err |= OMAP_I2C_STAT_XUDF;
+								goto complete;
+							}
+							cpu_relax();
+							stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
+						}
+				}
+
 				omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
 			}
 			omap_i2c_ack_stat(dev,
@@ -806,7 +842,7 @@ omap_i2c_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
+	ioarea = request_mem_region(mem->start, resource_size(mem),
 			pdev->name);
 	if (!ioarea) {
 		dev_err(&pdev->dev, "I2C region already claimed\n");
@@ -879,7 +915,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(adap, dev);
 	adap->owner = THIS_MODULE;
 	adap->class = I2C_CLASS_HWMON;
-	strncpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
+	strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
 	adap->algo = &omap_i2c_algo;
 	adap->dev.parent = &pdev->dev;
 
@@ -905,7 +941,7 @@ err_free_mem:
 	platform_set_drvdata(pdev, NULL);
 	kfree(dev);
 err_release_region:
-	release_mem_region(mem->start, (mem->end - mem->start) + 1);
+	release_mem_region(mem->start, resource_size(mem));
 
 	return r;
 }
@@ -925,7 +961,7 @@ omap_i2c_remove(struct platform_device *pdev)
 	iounmap(dev->base);
 	kfree(dev);
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem->start, (mem->end - mem->start) + 1);
+	release_mem_region(mem->start, resource_size(mem));
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 8f42a4536cd..20bb0ceb027 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -763,11 +763,6 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 	dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
 	dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
 
-	/* check for s3c2440 i2c controller  */
-
-	if (s3c24xx_i2c_is2440(i2c))
-		writel(0x0, i2c->regs + S3C2440_IICLC);
-
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 1c01083b01b..820487d0d5c 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -563,7 +563,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 		goto err_irq;
 	}
 
-	size = (res->end - res->start) + 1;
+	size = resource_size(res);
 
 	pd->reg = ioremap(res->start, size);
 	if (pd->reg == NULL) {
@@ -637,7 +637,7 @@ static void __exit sh_mobile_i2c_adap_exit(void)
 	platform_driver_unregister(&sh_mobile_i2c_driver);
 }
 
-module_init(sh_mobile_i2c_adap_init);
+subsys_initcall(sh_mobile_i2c_adap_init);
 module_exit(sh_mobile_i2c_adap_exit);
 
 MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver");
diff --git a/drivers/i2c/busses/i2c-simtec.c b/drivers/i2c/busses/i2c-simtec.c
index 042fda295f3..6407f47bda8 100644
--- a/drivers/i2c/busses/i2c-simtec.c
+++ b/drivers/i2c/busses/i2c-simtec.c
@@ -92,7 +92,7 @@ static int simtec_i2c_probe(struct platform_device *dev)
 		goto err;
 	}
 
-	size = (res->end-res->start)+1;
+	size = resource_size(res);
 
 	pd->ioarea = request_mem_region(res->start, size, dev->name);
 	if (pd->ioarea == NULL) {
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 182e711318b..d2728a28a8d 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -117,7 +117,8 @@ enum stu300_error {
 	STU300_ERROR_NONE = 0,
 	STU300_ERROR_ACKNOWLEDGE_FAILURE,
 	STU300_ERROR_BUS_ERROR,
-	STU300_ERROR_ARBITRATION_LOST
+	STU300_ERROR_ARBITRATION_LOST,
+	STU300_ERROR_UNKNOWN
 };
 
 /* timeout waiting for the controller to respond */
@@ -127,7 +128,7 @@ enum stu300_error {
  * The number of address send athemps tried before giving up.
  * If the first one failes it seems like 5 to 8 attempts are required.
  */
-#define NUM_ADDR_RESEND_ATTEMPTS 10
+#define NUM_ADDR_RESEND_ATTEMPTS 12
 
 /* I2C clock speed, in Hz 0-400kHz*/
 static unsigned int scl_frequency = 100000;
@@ -149,6 +150,7 @@ module_param(scl_frequency, uint,  0644);
  * @msg_index: index of current message
  * @msg_len: length of current message
  */
+
 struct stu300_dev {
 	struct platform_device	*pdev;
 	struct i2c_adapter	adapter;
@@ -188,6 +190,27 @@ static inline u32 stu300_r8(void __iomem *address)
 	return readl(address) & 0x000000FFU;
 }
 
+static void stu300_irq_enable(struct stu300_dev *dev)
+{
+	u32 val;
+	val = stu300_r8(dev->virtbase + I2C_CR);
+	val |= I2C_CR_INTERRUPT_ENABLE;
+	/* Twice paranoia (possible HW glitch) */
+	stu300_wr8(val, dev->virtbase + I2C_CR);
+	stu300_wr8(val, dev->virtbase + I2C_CR);
+}
+
+static void stu300_irq_disable(struct stu300_dev *dev)
+{
+	u32 val;
+	val = stu300_r8(dev->virtbase + I2C_CR);
+	val &= ~I2C_CR_INTERRUPT_ENABLE;
+	/* Twice paranoia (possible HW glitch) */
+	stu300_wr8(val, dev->virtbase + I2C_CR);
+	stu300_wr8(val, dev->virtbase + I2C_CR);
+}
+
+
 /*
  * Tells whether a certain event or events occurred in
  * response to a command. The events represent states in
@@ -196,9 +219,10 @@ static inline u32 stu300_r8(void __iomem *address)
  * documentation and can only be treated as abstract state
  * machine states.
  *
- * @ret 0 = event has not occurred, any other value means
- * the event occurred.
+ * @ret 0 = event has not occurred or unknown error, any
+ * other value means the correct event occurred or an error.
  */
+
 static int stu300_event_occurred(struct stu300_dev *dev,
 				   enum stu300_event mr_event) {
 	u32 status1;
@@ -206,11 +230,28 @@ static int stu300_event_occurred(struct stu300_dev *dev,
 
 	/* What event happened? */
 	status1 = stu300_r8(dev->virtbase + I2C_SR1);
+
 	if (!(status1 & I2C_SR1_EVF_IND))
 		/* No event at all */
 		return 0;
+
 	status2 = stu300_r8(dev->virtbase + I2C_SR2);
 
+	/* Block any multiple interrupts */
+	stu300_irq_disable(dev);
+
+	/* Check for errors first */
+	if (status2 & I2C_SR2_AF_IND) {
+		dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;
+		return 1;
+	} else if (status2 & I2C_SR2_BERR_IND) {
+		dev->cmd_err = STU300_ERROR_BUS_ERROR;
+		return 1;
+	} else if (status2 & I2C_SR2_ARLO_IND) {
+		dev->cmd_err = STU300_ERROR_ARBITRATION_LOST;
+		return 1;
+	}
+
 	switch (mr_event) {
 	case STU300_EVENT_1:
 		if (status1 & I2C_SR1_ADSL_IND)
@@ -221,10 +262,6 @@ static int stu300_event_occurred(struct stu300_dev *dev,
 	case STU300_EVENT_7:
 	case STU300_EVENT_8:
 		if (status1 & I2C_SR1_BTF_IND) {
-			if (status2 & I2C_SR2_AF_IND)
-				dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;
-			else if (status2 & I2C_SR2_BERR_IND)
-				dev->cmd_err = STU300_ERROR_BUS_ERROR;
 			return 1;
 		}
 		break;
@@ -240,8 +277,6 @@ static int stu300_event_occurred(struct stu300_dev *dev,
 	case STU300_EVENT_6:
 		if (status2 & I2C_SR2_ENDAD_IND) {
 			/* First check for any errors */
-			if (status2 & I2C_SR2_AF_IND)
-				dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;
 			return 1;
 		}
 		break;
@@ -252,8 +287,15 @@ static int stu300_event_occurred(struct stu300_dev *dev,
 	default:
 		break;
 	}
-	if (status2 & I2C_SR2_ARLO_IND)
-		dev->cmd_err = STU300_ERROR_ARBITRATION_LOST;
+	/* If we get here, we're on thin ice.
+	 * Here we are in a status where we have
+	 * gotten a response that does not match
+	 * what we requested.
+	 */
+	dev->cmd_err = STU300_ERROR_UNKNOWN;
+	dev_err(&dev->pdev->dev,
+		"Unhandled interrupt! %d sr1: 0x%x sr2: 0x%x\n",
+		mr_event, status1, status2);
 	return 0;
 }
 
@@ -262,21 +304,20 @@ static irqreturn_t stu300_irh(int irq, void *data)
 	struct stu300_dev *dev = data;
 	int res;
 
+	/* Just make sure that the block is clocked */
+	clk_enable(dev->clk);
+
 	/* See if this was what we were waiting for */
 	spin_lock(&dev->cmd_issue_lock);
-	if (dev->cmd_event != STU300_EVENT_NONE) {
-		res = stu300_event_occurred(dev, dev->cmd_event);
-		if (res || dev->cmd_err != STU300_ERROR_NONE) {
-			u32 val;
-
-			complete(&dev->cmd_complete);
-			/* Block any multiple interrupts */
-			val = stu300_r8(dev->virtbase + I2C_CR);
-			val &= ~I2C_CR_INTERRUPT_ENABLE;
-			stu300_wr8(val, dev->virtbase + I2C_CR);
-		}
-	}
+
+	res = stu300_event_occurred(dev, dev->cmd_event);
+	if (res || dev->cmd_err != STU300_ERROR_NONE)
+		complete(&dev->cmd_complete);
+
 	spin_unlock(&dev->cmd_issue_lock);
+
+	clk_disable(dev->clk);
+
 	return IRQ_HANDLED;
 }
 
@@ -308,7 +349,6 @@ static int stu300_start_and_await_event(struct stu300_dev *dev,
 	stu300_wr8(cr_value, dev->virtbase + I2C_CR);
 	ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
 							STU300_TIMEOUT);
-
 	if (ret < 0) {
 		dev_err(&dev->pdev->dev,
 		       "wait_for_completion_interruptible_timeout() "
@@ -342,7 +382,6 @@ static int stu300_await_event(struct stu300_dev *dev,
 				enum stu300_event mr_event)
 {
 	int ret;
-	u32 val;
 
 	if (unlikely(irqs_disabled())) {
 		/* TODO: implement polling for this case if need be. */
@@ -354,36 +393,18 @@ static int stu300_await_event(struct stu300_dev *dev,
 	/* Is it already here? */
 	spin_lock_irq(&dev->cmd_issue_lock);
 	dev->cmd_err = STU300_ERROR_NONE;
-	if (stu300_event_occurred(dev, mr_event)) {
-		spin_unlock_irq(&dev->cmd_issue_lock);
-		goto exit_await_check_err;
-	}
-	init_completion(&dev->cmd_complete);
-	dev->cmd_err = STU300_ERROR_NONE;
 	dev->cmd_event = mr_event;
 
-	/* Turn on the I2C interrupt for current operation */
-	val = stu300_r8(dev->virtbase + I2C_CR);
-	val |= I2C_CR_INTERRUPT_ENABLE;
-	stu300_wr8(val, dev->virtbase + I2C_CR);
-
-	/* Twice paranoia (possible HW glitch) */
-	stu300_wr8(val, dev->virtbase + I2C_CR);
+	init_completion(&dev->cmd_complete);
 
-	/* Check again: is it already here? */
-	if (unlikely(stu300_event_occurred(dev, mr_event))) {
-		/* Disable IRQ again. */
-		val &= ~I2C_CR_INTERRUPT_ENABLE;
-		stu300_wr8(val, dev->virtbase + I2C_CR);
-		spin_unlock_irq(&dev->cmd_issue_lock);
-		goto exit_await_check_err;
-	}
+	/* Turn on the I2C interrupt for current operation */
+	stu300_irq_enable(dev);
 
 	/* Unlock the command block and wait for the event to occur */
 	spin_unlock_irq(&dev->cmd_issue_lock);
+
 	ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
 							STU300_TIMEOUT);
-
 	if (ret < 0) {
 		dev_err(&dev->pdev->dev,
 		       "wait_for_completion_interruptible_timeout()"
@@ -401,7 +422,6 @@ static int stu300_await_event(struct stu300_dev *dev,
 		return -ETIMEDOUT;
 	}
 
- exit_await_check_err:
 	if (dev->cmd_err != STU300_ERROR_NONE) {
 		if (mr_event != STU300_EVENT_6) {
 			dev_err(&dev->pdev->dev, "controller "
@@ -457,18 +477,19 @@ struct stu300_clkset {
 };
 
 static const struct stu300_clkset stu300_clktable[] = {
-	{ 0, 0xFFU },
-	{ 2500000, I2C_OAR2_FR_25_10MHZ },
-	{ 10000000, I2C_OAR2_FR_10_1667MHZ },
-	{ 16670000, I2C_OAR2_FR_1667_2667MHZ },
-	{ 26670000, I2C_OAR2_FR_2667_40MHZ },
-	{ 40000000, I2C_OAR2_FR_40_5333MHZ },
-	{ 53330000, I2C_OAR2_FR_5333_66MHZ },
-	{ 66000000, I2C_OAR2_FR_66_80MHZ },
-	{ 80000000, I2C_OAR2_FR_80_100MHZ },
+	{ 0,         0xFFU },
+	{ 2500000,   I2C_OAR2_FR_25_10MHZ },
+	{ 10000000,  I2C_OAR2_FR_10_1667MHZ },
+	{ 16670000,  I2C_OAR2_FR_1667_2667MHZ },
+	{ 26670000,  I2C_OAR2_FR_2667_40MHZ },
+	{ 40000000,  I2C_OAR2_FR_40_5333MHZ },
+	{ 53330000,  I2C_OAR2_FR_5333_66MHZ },
+	{ 66000000,  I2C_OAR2_FR_66_80MHZ },
+	{ 80000000,  I2C_OAR2_FR_80_100MHZ },
 	{ 100000000, 0xFFU },
 };
 
+
 static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
 {
 
@@ -494,10 +515,10 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
 
 	if (dev->speed > 100000)
 		/* Fast Mode I2C */
-		val = ((clkrate/dev->speed)-9)/3;
+		val = ((clkrate/dev->speed) - 9)/3 + 1;
 	else
 		/* Standard Mode I2C */
-		val = ((clkrate/dev->speed)-7)/2;
+		val = ((clkrate/dev->speed) - 7)/2 + 1;
 
 	/* According to spec the divider must be > 2 */
 	if (val < 0x002) {
@@ -557,6 +578,7 @@ static int stu300_init_hw(struct stu300_dev *dev)
 	 */
 	clkrate = clk_get_rate(dev->clk);
 	ret = stu300_set_clk(dev, clkrate);
+
 	if (ret)
 		return ret;
 	/*
@@ -641,7 +663,6 @@ static int stu300_xfer_msg(struct i2c_adapter *adap,
 	int attempts = 0;
 	struct stu300_dev *dev = i2c_get_adapdata(adap);
 
-
 	clk_enable(dev->clk);
 
 	/* Remove this if (0) to trace each and every message. */
@@ -715,14 +736,15 @@ static int stu300_xfer_msg(struct i2c_adapter *adap,
 
 	if (attempts < NUM_ADDR_RESEND_ATTEMPTS && attempts > 0) {
 		dev_dbg(&dev->pdev->dev, "managed to get address "
-		       "through after %d attempts\n", attempts);
+			"through after %d attempts\n", attempts);
 	} else if (attempts == NUM_ADDR_RESEND_ATTEMPTS) {
 		dev_dbg(&dev->pdev->dev, "I give up, tried %d times "
-		       "to resend address.\n",
-		       NUM_ADDR_RESEND_ATTEMPTS);
+			"to resend address.\n",
+			NUM_ADDR_RESEND_ATTEMPTS);
 		goto exit_disable;
 	}
 
+
 	if (msg->flags & I2C_M_RD) {
 		/* READ: we read the actual bytes one at a time */
 		for (i = 0; i < msg->len; i++) {
@@ -804,8 +826,10 @@ static int stu300_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 {
 	int ret = -1;
 	int i;
+
 	struct stu300_dev *dev = i2c_get_adapdata(adap);
 	dev->msg_len = num;
+
 	for (i = 0; i < num; i++) {
 		/*
 		 * Another driver appears to send stop for each message,
@@ -817,6 +841,7 @@ static int stu300_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 		dev->msg_index = i;
 
 		ret = stu300_xfer_msg(adap, &msgs[i], (i == (num - 1)));
+
 		if (ret != 0) {
 			num = ret;
 			break;
@@ -845,6 +870,7 @@ stu300_probe(struct platform_device *pdev)
 	struct resource *res;
 	int bus_nr;
 	int ret = 0;
+	char clk_name[] = "I2C0";
 
 	dev = kzalloc(sizeof(struct stu300_dev), GFP_KERNEL);
 	if (!dev) {
@@ -854,7 +880,8 @@ stu300_probe(struct platform_device *pdev)
 	}
 
 	bus_nr = pdev->id;
-	dev->clk = clk_get(&pdev->dev, NULL);
+	clk_name[3] += (char)bus_nr;
+	dev->clk = clk_get(&pdev->dev, clk_name);
 	if (IS_ERR(dev->clk)) {
 		ret = PTR_ERR(dev->clk);
 		dev_err(&pdev->dev, "could not retrieve i2c bus clock\n");
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c
index 1a9cc135219..b96f3025e58 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/i2c/chips/tsl2550.c
@@ -27,7 +27,7 @@
 #include <linux/delay.h>
 
 #define TSL2550_DRV_NAME	"tsl2550"
-#define DRIVER_VERSION		"1.1.1"
+#define DRIVER_VERSION		"1.1.2"
 
 /*
  * Defines
@@ -189,13 +189,16 @@ static int tsl2550_calculate_lux(u8 ch0, u8 ch1)
 	u8 r = 128;
 
 	/* Avoid division by 0 and count 1 cannot be greater than count 0 */
-	if (c0 && (c1 <= c0))
-		r = c1 * 128 / c0;
+	if (c1 <= c0)
+		if (c0) {
+			r = c1 * 128 / c0;
+
+			/* Calculate LUX */
+			lux = ((c0 - c1) * ratio_lut[r]) / 256;
+		} else
+			lux = 0;
 	else
-		return -1;
-
-	/* Calculate LUX */
-	lux = ((c0 - c1) * ratio_lut[r]) / 256;
+		return -EAGAIN;
 
 	/* LUX range check */
 	return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux;
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
index bd066bb9d61..09f98ed0731 100644
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -135,6 +135,7 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
 
 	ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
 	hw[0].irq = 14;
+	hw[1].irq = 15;
 
 	return ide_host_add(d, hws, 2, NULL);
 }
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 77f79d26b26..c509c991646 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -92,6 +92,11 @@ int ide_acpi_init(void)
 	return 0;
 }
 
+bool ide_port_acpi(ide_hwif_t *hwif)
+{
+	return ide_noacpi == 0 && hwif->acpidata;
+}
+
 /**
  * ide_get_dev_handle - finds acpi_handle and PCI device.function
  * @dev: device to locate
@@ -352,9 +357,6 @@ int ide_acpi_exec_tfs(ide_drive_t *drive)
 	unsigned long	gtf_address;
 	unsigned long	obj_loc;
 
-	if (ide_noacpi)
-		return 0;
-
 	DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn);
 
 	ret = do_drive_get_GTF(drive, &gtf_length, &gtf_address, &obj_loc);
@@ -389,16 +391,6 @@ void ide_acpi_get_timing(ide_hwif_t *hwif)
 	struct acpi_buffer	output;
 	union acpi_object 	*out_obj;
 
-	if (ide_noacpi)
-		return;
-
-	DEBPRINT("ENTER:\n");
-
-	if (!hwif->acpidata) {
-		DEBPRINT("no ACPI data for %s\n", hwif->name);
-		return;
-	}
-
 	/* Setting up output buffer for _GTM */
 	output.length = ACPI_ALLOCATE_BUFFER;
 	output.pointer = NULL;	/* ACPI-CA sets this; save/free it later */
@@ -479,16 +471,6 @@ void ide_acpi_push_timing(ide_hwif_t *hwif)
 	struct ide_acpi_drive_link	*master = &hwif->acpidata->master;
 	struct ide_acpi_drive_link	*slave = &hwif->acpidata->slave;
 
-	if (ide_noacpi)
-		return;
-
-	DEBPRINT("ENTER:\n");
-
-	if (!hwif->acpidata) {
-		DEBPRINT("no ACPI data for %s\n", hwif->name);
-		return;
-	}
-
 	/* Give the GTM buffer + drive Identify data to the channel via the
 	 * _STM method: */
 	/* setup input parameters buffer for _STM */
@@ -527,16 +509,11 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on)
 	ide_drive_t *drive;
 	int i;
 
-	if (ide_noacpi || ide_noacpi_psx)
+	if (ide_noacpi_psx)
 		return;
 
 	DEBPRINT("ENTER:\n");
 
-	if (!hwif->acpidata) {
-		DEBPRINT("no ACPI data for %s\n", hwif->name);
-		return;
-	}
-
 	/* channel first and then drives for power on and verse versa for power off */
 	if (on)
 		acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0);
@@ -616,7 +593,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif)
 				 drive->name, err);
 	}
 
-	if (!ide_acpionboot) {
+	if (ide_noacpi || ide_acpionboot == 0) {
 		DEBPRINT("ACPI methods disabled on boot\n");
 		return;
 	}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 4a19686fcfe..6a9a769bffc 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -592,9 +592,19 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 			}
 		} else if (!blk_pc_request(rq)) {
 			ide_cd_request_sense_fixup(drive, cmd);
-			/* complain if we still have data left to transfer */
+
 			uptodate = cmd->nleft ? 0 : 1;
-			if (uptodate == 0)
+
+			/*
+			 * suck out the remaining bytes from the drive in an
+			 * attempt to complete the data xfer. (see BZ#13399)
+			 */
+			if (!(stat & ATA_ERR) && !uptodate && thislen) {
+				ide_pio_bytes(drive, cmd, write, thislen);
+				uptodate = cmd->nleft ? 0 : 1;
+			}
+
+			if (!uptodate)
 				rq->cmd_flags |= REQ_FAILED;
 		}
 		goto out_end;
@@ -876,9 +886,12 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
 		return stat;
 
 	/*
-	 * Sanity check the given block size
+	 * Sanity check the given block size, in so far as making
+	 * sure the sectors_per_frame we give to the caller won't
+	 * end up being bogus.
 	 */
 	blocklen = be32_to_cpu(capbuf.blocklen);
+	blocklen = (blocklen >> SECTOR_BITS) << SECTOR_BITS;
 	switch (blocklen) {
 	case 512:
 	case 1024:
@@ -886,10 +899,9 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
 	case 4096:
 		break;
 	default:
-		printk(KERN_ERR PFX "%s: weird block size %u\n",
+		printk_once(KERN_ERR PFX "%s: weird block size %u; "
+				"setting default block size to 2048\n",
 				drive->name, blocklen);
-		printk(KERN_ERR PFX "%s: default to 2kb block size\n",
-				drive->name);
 		blocklen = 2048;
 		break;
 	}
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 527908ff298..063b933d864 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -408,6 +408,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
 	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
+	PCMCIA_DEVICE_PROD_ID12("CNF   ", "CD-ROM", 0x46d7db81, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
 	PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c
index 5bf958e5b1d..1099bf7cf96 100644
--- a/drivers/ide/ide-devsets.c
+++ b/drivers/ide/ide-devsets.c
@@ -183,6 +183,6 @@ ide_startstop_t ide_do_devset(ide_drive_t *drive, struct request *rq)
 	err = setfunc(drive, *(int *)&rq->cmd[1]);
 	if (err)
 		rq->errors = err;
-	ide_complete_rq(drive, err, ide_rq_bytes(rq));
+	ide_complete_rq(drive, err, blk_rq_bytes(rq));
 	return ide_stopped;
 }
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 695181120cd..7f878017b73 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -455,6 +455,7 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
 
 	rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
 	rq->special = cmd;
+	cmd->rq = rq;
 }
 
 ide_devset_get(multcount, mult_count);
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 219e6fb78dc..ee58c88dee5 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -361,9 +361,6 @@ static int ide_tune_dma(ide_drive_t *drive)
 	if (__ide_dma_bad_drive(drive))
 		return 0;
 
-	if (ide_id_dma_bug(drive))
-		return 0;
-
 	if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
 		return config_drive_for_dma(drive);
 
@@ -394,24 +391,6 @@ static int ide_dma_check(ide_drive_t *drive)
 	return -1;
 }
 
-int ide_id_dma_bug(ide_drive_t *drive)
-{
-	u16 *id = drive->id;
-
-	if (id[ATA_ID_FIELD_VALID] & 4) {
-		if ((id[ATA_ID_UDMA_MODES] >> 8) &&
-		    (id[ATA_ID_MWDMA_MODES] >> 8))
-			goto err_out;
-	} else if ((id[ATA_ID_MWDMA_MODES] >> 8) &&
-		   (id[ATA_ID_SWDMA_MODES] >> 8))
-		goto err_out;
-
-	return 0;
-err_out:
-	printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name);
-	return 1;
-}
-
 int ide_set_dma(ide_drive_t *drive)
 {
 	int rc;
diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c
index 2b914197961..e9abf2c3c33 100644
--- a/drivers/ide/ide-eh.c
+++ b/drivers/ide/ide-eh.c
@@ -149,7 +149,7 @@ static inline void ide_complete_drive_reset(ide_drive_t *drive, int err)
 	if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) {
 		if (err <= 0 && rq->errors == 0)
 			rq->errors = -EIO;
-		ide_complete_rq(drive, err ? err : 0, ide_rq_bytes(rq));
+		ide_complete_rq(drive, err ? err : 0, blk_rq_bytes(rq));
 	}
 }
 
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 8b3f204f7d7..fefbdfc8db0 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -293,7 +293,7 @@ out_end:
 	drive->failed_pc = NULL;
 	if (blk_fs_request(rq) == 0 && rq->errors == 0)
 		rq->errors = -EIO;
-	ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
+	ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
 	return ide_stopped;
 }
 
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 1059f809b80..db96138fefc 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -112,16 +112,6 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err)
 	}
 }
 
-/* obsolete, blk_rq_bytes() should be used instead */
-unsigned int ide_rq_bytes(struct request *rq)
-{
-	if (blk_pc_request(rq))
-		return blk_rq_bytes(rq);
-	else
-		return blk_rq_cur_sectors(rq) << 9;
-}
-EXPORT_SYMBOL_GPL(ide_rq_bytes);
-
 int ide_complete_rq(ide_drive_t *drive, int error, unsigned int nr_bytes)
 {
 	ide_hwif_t *hwif = drive->hwif;
@@ -152,14 +142,14 @@ void ide_kill_rq(ide_drive_t *drive, struct request *rq)
 
 	if ((media == ide_floppy || media == ide_tape) && drv_req) {
 		rq->errors = 0;
-		ide_complete_rq(drive, 0, blk_rq_bytes(rq));
 	} else {
 		if (media == ide_tape)
 			rq->errors = IDE_DRV_ERROR_GENERAL;
 		else if (blk_fs_request(rq) == 0 && rq->errors == 0)
 			rq->errors = -EIO;
-		ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
 	}
+
+	ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
 }
 
 static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index 82f252c3ee6..e246d3d3fbc 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -64,7 +64,8 @@ static int ide_get_identity_ioctl(ide_drive_t *drive, unsigned int cmd,
 		goto out;
 	}
 
-	id = kmalloc(size, GFP_KERNEL);
+	/* ata_id_to_hd_driveid() relies on 'id' to be fully allocated. */
+	id = kmalloc(ATA_ID_WORDS * 2, GFP_KERNEL);
 	if (id == NULL) {
 		rc = -ENOMEM;
 		goto out;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index fa047150a1c..2892b242bbe 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -210,6 +210,7 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list);
  */
 static const struct drive_list_entry ivb_list[] = {
 	{ "QUANTUM FIREBALLlct10 05"	, "A03.0900"	},
+	{ "QUANTUM FIREBALLlct20 30"	, "APL.0900"	},
 	{ "TSSTcorp CDDVDW SH-S202J"	, "SB00"	},
 	{ "TSSTcorp CDDVDW SH-S202J"	, "SB01"	},
 	{ "TSSTcorp CDDVDW SH-S202N"	, "SB00"	},
@@ -329,9 +330,6 @@ int ide_driveid_update(ide_drive_t *drive)
 
 	kfree(id);
 
-	if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive))
-		ide_dma_off(drive);
-
 	return 1;
 out_err:
 	if (rc == 2)
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index c14ca144cff..ad7be2669dc 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -10,9 +10,11 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg)
 	struct request_pm_state rqpm;
 	int ret;
 
-	/* call ACPI _GTM only once */
-	if ((drive->dn & 1) == 0 || pair == NULL)
-		ide_acpi_get_timing(hwif);
+	if (ide_port_acpi(hwif)) {
+		/* call ACPI _GTM only once */
+		if ((drive->dn & 1) == 0 || pair == NULL)
+			ide_acpi_get_timing(hwif);
+	}
 
 	memset(&rqpm, 0, sizeof(rqpm));
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
@@ -26,9 +28,11 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg)
 	ret = blk_execute_rq(drive->queue, NULL, rq, 0);
 	blk_put_request(rq);
 
-	/* call ACPI _PS3 only after both devices are suspended */
-	if (ret == 0 && ((drive->dn & 1) || pair == NULL))
-		ide_acpi_set_state(hwif, 0);
+	if (ret == 0 && ide_port_acpi(hwif)) {
+		/* call ACPI _PS3 only after both devices are suspended */
+		if ((drive->dn & 1) || pair == NULL)
+			ide_acpi_set_state(hwif, 0);
+	}
 
 	return ret;
 }
@@ -42,13 +46,15 @@ int generic_ide_resume(struct device *dev)
 	struct request_pm_state rqpm;
 	int err;
 
-	/* call ACPI _PS0 / _STM only once */
-	if ((drive->dn & 1) == 0 || pair == NULL) {
-		ide_acpi_set_state(hwif, 1);
-		ide_acpi_push_timing(hwif);
-	}
+	if (ide_port_acpi(hwif)) {
+		/* call ACPI _PS0 / _STM only once */
+		if ((drive->dn & 1) == 0 || pair == NULL) {
+			ide_acpi_set_state(hwif, 1);
+			ide_acpi_push_timing(hwif);
+		}
 
-	ide_acpi_exec_tfs(drive);
+		ide_acpi_exec_tfs(drive);
+	}
 
 	memset(&rqpm, 0, sizeof(rqpm));
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 51af4eea0d3..1bb106f6221 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -818,6 +818,24 @@ static int ide_port_setup_devices(ide_hwif_t *hwif)
 	return j;
 }
 
+static void ide_host_enable_irqs(struct ide_host *host)
+{
+	ide_hwif_t *hwif;
+	int i;
+
+	ide_host_for_each_port(i, hwif, host) {
+		if (hwif == NULL)
+			continue;
+
+		/* clear any pending IRQs */
+		hwif->tp_ops->read_status(hwif);
+
+		/* unmask IRQs */
+		if (hwif->io_ports.ctl_addr)
+			hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
+	}
+}
+
 /*
  * This routine sets up the IRQ for an IDE interface.
  */
@@ -831,9 +849,6 @@ static int init_irq (ide_hwif_t *hwif)
 	if (irq_handler == NULL)
 		irq_handler = ide_intr;
 
-	if (io_ports->ctl_addr)
-		hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-
 	if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
 		goto out_up;
 
@@ -1404,6 +1419,8 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 			ide_port_tune_devices(hwif);
 	}
 
+	ide_host_enable_irqs(host);
+
 	ide_host_for_each_port(i, hwif, host) {
 		if (hwif == NULL)
 			continue;
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 013dc595fab..bc5fb12b913 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1064,6 +1064,7 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd,
 		tape->best_dsc_rw_freq = config.dsc_rw_frequency;
 		break;
 	case 0x0350:
+		memset(&config, 0, sizeof(config));
 		config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
 		config.nr_stages = 1;
 		if (copy_to_user(argp, &config, sizeof(config)))
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 83b734aec92..52b25f8b111 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -880,6 +880,7 @@ static struct sbp2_lu *sbp2_alloc_device(struct unit_directory *ud)
 	}
 
 	shost->hostdata[0] = (unsigned long)lu;
+	shost->max_cmd_len = SBP2_MAX_CDB_SIZE;
 
 	if (!scsi_add_host(shost, &ud->device)) {
 		lu->shost = shost;
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index c5036f1cc5b..64a3a66a8a3 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -25,6 +25,12 @@
 #define SBP2_DEVICE_NAME		"sbp2"
 
 /*
+ * There is no transport protocol limit to the CDB length,  but we implement
+ * a fixed length only.  16 bytes is enough for disks larger than 2 TB.
+ */
+#define SBP2_MAX_CDB_SIZE		16
+
+/*
  * SBP-2 specific definitions
  */
 
@@ -51,7 +57,7 @@ struct sbp2_command_orb {
 	u32 data_descriptor_hi;
 	u32 data_descriptor_lo;
 	u32 misc;
-	u8 cdb[12];
+	u8 cdb[SBP2_MAX_CDB_SIZE];
 } __attribute__((packed));
 
 #define SBP2_LOGIN_REQUEST		0x0
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 114efd8dc8f..1148140d08a 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -608,8 +608,7 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 						    p, compat_mode);
 
 			if (_IOC_NR(cmd) == _IOC_NR(EVIOCGNAME(0)))
-				return str_to_user(dev_name(&evdev->dev),
-						   _IOC_SIZE(cmd), p);
+				return str_to_user(dev->name, _IOC_SIZE(cmd), p);
 
 			if (_IOC_NR(cmd) == _IOC_NR(EVIOCGPHYS(0)))
 				return str_to_user(dev->phys, _IOC_SIZE(cmd), p);
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 0e12f89276a..9a1d55b74d7 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -456,8 +456,11 @@ static int joydev_ioctl_common(struct joydev *joydev,
 				unsigned int cmd, void __user *argp)
 {
 	struct input_dev *dev = joydev->handle.dev;
+	size_t len;
 	int i, j;
+	const char *name;
 
+	/* Process fixed-sized commands. */
 	switch (cmd) {
 
 	case JS_SET_CAL:
@@ -499,9 +502,22 @@ static int joydev_ioctl_common(struct joydev *joydev,
 		return copy_to_user(argp, joydev->corr,
 			sizeof(joydev->corr[0]) * joydev->nabs) ? -EFAULT : 0;
 
-	case JSIOCSAXMAP:
-		if (copy_from_user(joydev->abspam, argp,
-				   sizeof(__u8) * (ABS_MAX + 1)))
+	}
+
+	/*
+	 * Process variable-sized commands (the axis and button map commands
+	 * are considered variable-sized to decouple them from the values of
+	 * ABS_MAX and KEY_MAX).
+	 */
+	switch (cmd & ~IOCSIZE_MASK) {
+
+	case (JSIOCSAXMAP & ~IOCSIZE_MASK):
+		len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam));
+		/*
+		 * FIXME: we should not copy into our axis map before
+		 * validating the data.
+		 */
+		if (copy_from_user(joydev->abspam, argp, len))
 			return -EFAULT;
 
 		for (i = 0; i < joydev->nabs; i++) {
@@ -511,13 +527,17 @@ static int joydev_ioctl_common(struct joydev *joydev,
 		}
 		return 0;
 
-	case JSIOCGAXMAP:
-		return copy_to_user(argp, joydev->abspam,
-			sizeof(__u8) * (ABS_MAX + 1)) ? -EFAULT : 0;
-
-	case JSIOCSBTNMAP:
-		if (copy_from_user(joydev->keypam, argp,
-				   sizeof(__u16) * (KEY_MAX - BTN_MISC + 1)))
+	case (JSIOCGAXMAP & ~IOCSIZE_MASK):
+		len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam));
+		return copy_to_user(argp, joydev->abspam, len) ? -EFAULT : 0;
+
+	case (JSIOCSBTNMAP & ~IOCSIZE_MASK):
+		len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam));
+		/*
+		 * FIXME: we should not copy into our keymap before
+		 * validating the data.
+		 */
+		if (copy_from_user(joydev->keypam, argp, len))
 			return -EFAULT;
 
 		for (i = 0; i < joydev->nkey; i++) {
@@ -529,25 +549,19 @@ static int joydev_ioctl_common(struct joydev *joydev,
 
 		return 0;
 
-	case JSIOCGBTNMAP:
-		return copy_to_user(argp, joydev->keypam,
-			sizeof(__u16) * (KEY_MAX - BTN_MISC + 1)) ? -EFAULT : 0;
+	case (JSIOCGBTNMAP & ~IOCSIZE_MASK):
+		len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam));
+		return copy_to_user(argp, joydev->keypam, len) ? -EFAULT : 0;
 
-	default:
-		if ((cmd & ~IOCSIZE_MASK) == JSIOCGNAME(0)) {
-			int len;
-			const char *name = dev_name(&dev->dev);
-
-			if (!name)
-				return 0;
-			len = strlen(name) + 1;
-			if (len > _IOC_SIZE(cmd))
-				len = _IOC_SIZE(cmd);
-			if (copy_to_user(argp, name, len))
-				return -EFAULT;
-			return len;
-		}
+	case JSIOCGNAME(0):
+		name = dev->name;
+		if (!name)
+			return 0;
+
+		len = min_t(size_t, _IOC_SIZE(cmd), strlen(name) + 1);
+		return copy_to_user(argp, name, len) ? -EFAULT : len;
 	}
+
 	return -EINVAL;
 }
 
diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c
index baabf830264..f6c688cae33 100644
--- a/drivers/input/joystick/iforce/iforce-main.c
+++ b/drivers/input/joystick/iforce/iforce-main.c
@@ -74,6 +74,7 @@ static struct iforce_device iforce_device[] = {
 	{ 0x05ef, 0x8884, "AVB Mag Turbo Force",			btn_avb_wheel, abs_wheel, ff_iforce },
 	{ 0x05ef, 0x8888, "AVB Top Shot Force Feedback Racing Wheel",	btn_avb_tw, abs_wheel, ff_iforce }, //?
 	{ 0x061c, 0xc0a4, "ACT LABS Force RS",                          btn_wheel, abs_wheel, ff_iforce }, //?
+	{ 0x061c, 0xc084, "ACT LABS Force RS",				btn_wheel, abs_wheel, ff_iforce },
 	{ 0x06f8, 0x0001, "Guillemot Race Leader Force Feedback",	btn_wheel, abs_wheel, ff_iforce }, //?
 	{ 0x06f8, 0x0004, "Guillemot Force Feedback Racing Wheel",	btn_wheel, abs_wheel, ff_iforce }, //?
 	{ 0x06f8, 0x0004, "Gullemot Jet Leader 3D",			btn_joystick, abs_joystick, ff_iforce }, //?
diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c
index f83185aeb51..9f289d8f52c 100644
--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -223,6 +223,7 @@ static struct usb_device_id iforce_usb_ids [] = {
 	{ USB_DEVICE(0x05ef, 0x8884) },		/* AVB Mag Turbo Force */
 	{ USB_DEVICE(0x05ef, 0x8888) },		/* AVB Top Shot FFB Racing Wheel */
 	{ USB_DEVICE(0x061c, 0xc0a4) },         /* ACT LABS Force RS */
+	{ USB_DEVICE(0x061c, 0xc084) },         /* ACT LABS Force RS */
 	{ USB_DEVICE(0x06f8, 0x0001) },		/* Guillemot Race Leader Force Feedback */
 	{ USB_DEVICE(0x06f8, 0x0004) },		/* Guillemot Force Feedback Racing Wheel */
 	{ USB_DEVICE(0x06f8, 0xa302) },		/* Guillemot Jet Leader 3D */
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index b868b8d5fbb..f155ad8cdae 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -470,20 +470,20 @@ static void xpad_irq_out(struct urb *urb)
 	status = urb->status;
 
 	switch (status) {
-		case 0:
+	case 0:
 		/* success */
-		break;
-		case -ECONNRESET:
-		case -ENOENT:
-		case -ESHUTDOWN:
-			/* this urb is terminated, clean up */
-			dbg("%s - urb shutting down with status: %d",
-				__func__, status);
-			return;
-		default:
-			dbg("%s - nonzero urb status received: %d",
-				__func__, status);
-			goto exit;
+		return;
+
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __func__, status);
+		return;
+
+	default:
+		dbg("%s - nonzero urb status received: %d", __func__, status);
+		goto exit;
 	}
 
 exit:
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 9d8f796c674..a6b989a9dc0 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -12,6 +12,42 @@ menuconfig INPUT_KEYBOARD
 
 if INPUT_KEYBOARD
 
+config KEYBOARD_AAED2000
+	tristate "AAED-2000 keyboard"
+	depends on MACH_AAED2000
+	select INPUT_POLLDEV
+	default y
+	help
+	  Say Y here to enable the keyboard on the Agilent AAED-2000
+	  development board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called aaed2000_kbd.
+
+config KEYBOARD_AMIGA
+	tristate "Amiga keyboard"
+	depends on AMIGA
+	help
+	  Say Y here if you are running Linux on any AMIGA and have a keyboard
+	  attached.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called amikbd.
+
+config ATARI_KBD_CORE
+	bool
+
+config KEYBOARD_ATARI
+	tristate "Atari keyboard"
+	depends on ATARI
+	select ATARI_KBD_CORE
+	help
+	  Say Y here if you are running Linux on any Atari and have a keyboard
+	  attached.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atakbd.
+
 config KEYBOARD_ATKBD
 	tristate "AT keyboard" if EMBEDDED || !X86
 	default y
@@ -68,69 +104,14 @@ config KEYBOARD_ATKBD_RDI_KEYCODES
 	  right-hand column will be interpreted as the key shown in the
 	  left-hand column.
 
-config KEYBOARD_SUNKBD
-	tristate "Sun Type 4 and Type 5 keyboard"
-	select SERIO
-	help
-	  Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
-	  connected either to the Sun keyboard connector or to an serial
-	  (RS-232) port via a simple adapter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sunkbd.
-
-config KEYBOARD_LKKBD
-	tristate "DECstation/VAXstation LK201/LK401 keyboard"
-	select SERIO
-	help
-	  Say Y here if you want to use a LK201 or LK401 style serial
-	  keyboard. This keyboard is also useable on PCs if you attach
-	  it with the inputattach program. The connector pinout is
-	  described within lkkbd.c.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called lkkbd.
-
-config KEYBOARD_LOCOMO
-	tristate "LoCoMo Keyboard Support"
-	depends on SHARP_LOCOMO && INPUT_KEYBOARD
-	help
-	  Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called locomokbd.
-
-config KEYBOARD_XTKBD
-	tristate "XT keyboard"
-	select SERIO
-	help
-	  Say Y here if you want to use the old IBM PC/XT keyboard (or
-	  compatible) on your system. This is only possible with a
-	  parallel port keyboard adapter, you cannot connect it to the
-	  keyboard port on a PC that runs Linux.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called xtkbd.
-
-config KEYBOARD_NEWTON
-	tristate "Newton keyboard"
-	select SERIO
-	help
-	  Say Y here if you have a Newton keyboard on a serial port.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called newtonkbd.
-
-config KEYBOARD_STOWAWAY
-	tristate "Stowaway keyboard"
-	select SERIO
+config KEYBOARD_BFIN
+	tristate "Blackfin BF54x keypad support"
+	depends on (BF54x && !BF544)
 	help
-	  Say Y here if you have a Stowaway keyboard on a serial port.
-	  Stowaway compatible keyboards like Dicota Input-PDA keyboard
-	  are also supported by this driver.
+	  Say Y here if you want to use the BF54x keypad.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called stowaway.
+	  module will be called bf54x-keys.
 
 config KEYBOARD_CORGI
 	tristate "Corgi keyboard"
@@ -143,61 +124,50 @@ config KEYBOARD_CORGI
 	  To compile this driver as a module, choose M here: the
 	  module will be called corgikbd.
 
-config KEYBOARD_SPITZ
-	tristate "Spitz keyboard"
-	depends on PXA_SHARPSL
-	default y
+config KEYBOARD_LKKBD
+	tristate "DECstation/VAXstation LK201/LK401 keyboard"
+	select SERIO
 	help
-	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
-	  SL-C3000 and Sl-C3100 series of PDAs.
+	  Say Y here if you want to use a LK201 or LK401 style serial
+	  keyboard. This keyboard is also useable on PCs if you attach
+	  it with the inputattach program. The connector pinout is
+	  described within lkkbd.c.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called spitzkbd.
+	  module will be called lkkbd.
 
-config KEYBOARD_TOSA
-	tristate "Tosa keyboard"
-	depends on MACH_TOSA
-	default y
+config KEYBOARD_EP93XX
+	tristate "EP93xx Matrix Keypad support"
+	depends on ARCH_EP93XX
 	help
-	  Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
+	  Say Y here to enable the matrix keypad on the Cirrus EP93XX.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called tosakbd.
+	  module will be called ep93xx_keypad.
 
-config KEYBOARD_TOSA_USE_EXT_KEYCODES
-	bool "Tosa keyboard: use extended keycodes"
-	depends on KEYBOARD_TOSA
-	default n
+config KEYBOARD_GPIO
+	tristate "GPIO Buttons"
+	depends on GENERIC_GPIO
 	help
-	  Say Y here to enable the tosa keyboard driver to generate extended
-	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
-	  by either console keyboard driver or by Kdrive keybd driver.
-
-	  Say Y only if you know, what you are doing!
+	  This driver implements support for buttons connected
+	  to GPIO pins of various CPUs (and some other chips).
 
-config KEYBOARD_AMIGA
-	tristate "Amiga keyboard"
-	depends on AMIGA
-	help
-	  Say Y here if you are running Linux on any AMIGA and have a keyboard
-	  attached.
+	  Say Y here if your device has buttons connected
+	  directly to such GPIO pins.  Your board-specific
+	  setup logic must also provide a platform device,
+	  with configuration data saying which GPIOs are used.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called amikbd.
+	  module will be called gpio_keys.
 
-config ATARI_KBD_CORE
-	bool
-
-config KEYBOARD_ATARI
-	tristate "Atari keyboard"
-	depends on ATARI
-	select ATARI_KBD_CORE
+config KEYBOARD_MATRIX
+	tristate "GPIO driven matrix keypad support"
+	depends on GENERIC_GPIO
 	help
-	  Say Y here if you are running Linux on any Atari and have a keyboard
-	  attached.
+	  Enable support for GPIO driven matrix keypad.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called atakbd.
+	  module will be called matrix_keypad.
 
 config KEYBOARD_HIL_OLD
 	tristate "HP HIL keyboard support (simple driver)"
@@ -261,20 +231,39 @@ config KEYBOARD_LM8323
 	  To compile this driver as a module, choose M here: the
 	  module will be called lm8323.
 
-config KEYBOARD_OMAP
-	tristate "TI OMAP keypad support"
-	depends on (ARCH_OMAP1 || ARCH_OMAP2)
+config KEYBOARD_LOCOMO
+	tristate "LoCoMo Keyboard Support"
+	depends on SHARP_LOCOMO
 	help
-	  Say Y here if you want to use the OMAP keypad.
+	  Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called omap-keypad.
+	  module will be called locomokbd.
+
+config KEYBOARD_MAPLE
+	tristate "Maple bus keyboard"
+	depends on SH_DREAMCAST && MAPLE
+	help
+	  Say Y here if you have a Dreamcast console running Linux and have
+	  a keyboard attached to its Maple bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called maple_keyb.
+
+config KEYBOARD_NEWTON
+	tristate "Newton keyboard"
+	select SERIO
+	help
+	  Say Y here if you have a Newton keyboard on a serial port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called newtonkbd.
 
 config KEYBOARD_PXA27x
 	tristate "PXA27x/PXA3xx keypad support"
 	depends on PXA27x || PXA3xx
 	help
-	  Enable support for PXA27x/PXA3xx keypad controller
+	  Enable support for PXA27x/PXA3xx keypad controller.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called pxa27x_keypad.
@@ -288,51 +277,38 @@ config KEYBOARD_PXA930_ROTARY
 	  To compile this driver as a module, choose M here: the
 	  module will be called pxa930_rotary.
 
-config KEYBOARD_AAED2000
-	tristate "AAED-2000 keyboard"
-	depends on MACH_AAED2000
-	select INPUT_POLLDEV
+config KEYBOARD_SPITZ
+	tristate "Spitz keyboard"
+	depends on PXA_SHARPSL
 	default y
 	help
-	  Say Y here to enable the keyboard on the Agilent AAED-2000
-	  development board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called aaed2000_kbd.
-
-config KEYBOARD_GPIO
-	tristate "GPIO Buttons"
-	depends on GENERIC_GPIO
-	help
-	  This driver implements support for buttons connected
-	  to GPIO pins of various CPUs (and some other chips).
-
-	  Say Y here if your device has buttons connected
-	  directly to such GPIO pins.  Your board-specific
-	  setup logic must also provide a platform device,
-	  with configuration data saying which GPIOs are used.
+	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
+	  SL-C3000 and Sl-C3100 series of PDAs.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called gpio-keys.
+	  module will be called spitzkbd.
 
-config KEYBOARD_MAPLE
-	tristate "Maple bus keyboard"
-	depends on SH_DREAMCAST && MAPLE
+config KEYBOARD_STOWAWAY
+	tristate "Stowaway keyboard"
+	select SERIO
 	help
-	  Say Y here if you have a Dreamcast console running Linux and have
-	  a keyboard attached to its Maple bus.
+	  Say Y here if you have a Stowaway keyboard on a serial port.
+	  Stowaway compatible keyboards like Dicota Input-PDA keyboard
+	  are also supported by this driver.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called maple_keyb.
+	  module will be called stowaway.
 
-config KEYBOARD_BFIN
-	tristate "Blackfin BF54x keypad support"
-	depends on (BF54x && !BF544)
+config KEYBOARD_SUNKBD
+	tristate "Sun Type 4 and Type 5 keyboard"
+	select SERIO
 	help
-	  Say Y here if you want to use the BF54x keypad.
+	  Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
+	  connected either to the Sun keyboard connector or to an serial
+	  (RS-232) port via a simple adapter.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called bf54x-keys.
+	  module will be called sunkbd.
 
 config KEYBOARD_SH_KEYSC
 	tristate "SuperH KEYSC keypad support"
@@ -344,13 +320,45 @@ config KEYBOARD_SH_KEYSC
 	  To compile this driver as a module, choose M here: the
 	  module will be called sh_keysc.
 
-config KEYBOARD_EP93XX
-	tristate "EP93xx Matrix Keypad support"
-	depends on ARCH_EP93XX
+config KEYBOARD_OMAP
+	tristate "TI OMAP keypad support"
+	depends on (ARCH_OMAP1 || ARCH_OMAP2)
 	help
-	  Say Y here to enable the matrix keypad on the Cirrus EP93XX.
+	  Say Y here if you want to use the OMAP keypad.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ep93xx_keypad.
+	  module will be called omap-keypad.
+
+config KEYBOARD_TOSA
+	tristate "Tosa keyboard"
+	depends on MACH_TOSA
+	default y
+	help
+	  Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tosakbd.
+
+config KEYBOARD_TOSA_USE_EXT_KEYCODES
+	bool "Tosa keyboard: use extended keycodes"
+	depends on KEYBOARD_TOSA
+	help
+	  Say Y here to enable the tosa keyboard driver to generate extended
+	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+	  by either console keyboard driver or by Kdrive keybd driver.
+
+	  Say Y only if you know, what you are doing!
+
+config KEYBOARD_XTKBD
+	tristate "XT keyboard"
+	select SERIO
+	help
+	  Say Y here if you want to use the old IBM PC/XT keyboard (or
+	  compatible) on your system. This is only possible with a
+	  parallel port keyboard adapter, you cannot connect it to the
+	  keyboard port on a PC that runs Linux.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xtkbd.
 
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 156b647a259..b5b5eae9724 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -4,29 +4,30 @@
 
 # Each configuration option enables a list of files.
 
-obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
-obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
-obj-$(CONFIG_KEYBOARD_LKKBD)		+= lkkbd.o
-obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o
+obj-$(CONFIG_KEYBOARD_AAED2000)		+= aaed2000_kbd.o
 obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
-obj-$(CONFIG_KEYBOARD_LOCOMO)		+= locomokbd.o
-obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
-obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
+obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
+obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_CORGI)		+= corgikbd.o
-obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkbd.o
-obj-$(CONFIG_KEYBOARD_TOSA)		+= tosakbd.o
+obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
+obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
+obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
+obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
+obj-$(CONFIG_KEYBOARD_LKKBD)		+= lkkbd.o
 obj-$(CONFIG_KEYBOARD_LM8323)		+= lm8323.o
+obj-$(CONFIG_KEYBOARD_LOCOMO)		+= locomokbd.o
+obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
+obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
+obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
 obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keypad.o
 obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
-obj-$(CONFIG_KEYBOARD_AAED2000)		+= aaed2000_kbd.o
-obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
-obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
-obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
-obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
-obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
-obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
+obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkbd.o
+obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
+obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
+obj-$(CONFIG_KEYBOARD_TOSA)		+= tosakbd.o
+obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index df3f8aa6811..6c6a09b1c0f 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -880,6 +880,14 @@ static unsigned int atkbd_hp_zv6100_forced_release_keys[] = {
 };
 
 /*
+ * Perform fixup for HP (Compaq) Presario R4000 R4100 R4200 that don't generate
+ * release for their volume buttons
+ */
+static unsigned int atkbd_hp_r4000_forced_release_keys[] = {
+	0xae, 0xb0, -1U
+};
+
+/*
  * Samsung NC10,NC20 with Fn+F? key release not working
  */
 static unsigned int atkbd_samsung_forced_release_keys[] = {
@@ -895,6 +903,13 @@ static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = {
 };
 
 /*
+ * Amilo Pi 3525 key release for Fn+Volume keys not working
+ */
+static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = {
+	0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U
+};
+
+/*
  * Amilo Xi 3650 key release for light touch bar not working
  */
 static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
@@ -902,6 +917,13 @@ static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
 };
 
 /*
+ * Soltech TA12 system with broken key release on volume keys and mute key
+ */
+static unsigned int atkdb_soltech_ta12_forced_release_keys[] = {
+	0xa0, 0xae, 0xb0, -1U
+};
+
+/*
  * atkbd_set_keycode_table() initializes keyboard's keycode table
  * according to the selected scancode set
  */
@@ -1523,6 +1545,33 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_hp_zv6100_forced_release_keys,
 	},
 	{
+		.ident = "HP Presario R4000",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_hp_r4000_forced_release_keys,
+	},
+	{
+		.ident = "HP Presario R4100",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_hp_r4000_forced_release_keys,
+	},
+	{
+		.ident = "HP Presario R4200",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_hp_r4000_forced_release_keys,
+	},
+	{
 		.ident = "Inventec Symphony",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
@@ -1568,6 +1617,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_amilo_pa1510_forced_release_keys,
 	},
 	{
+		.ident = "Fujitsu Amilo Pi 3525",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_amilo_pi3525_forced_release_keys,
+	},
+	{
 		.ident = "Fujitsu Amilo Xi 3650",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
@@ -1576,6 +1634,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.callback = atkbd_setup_forced_release,
 		.driver_data = atkbd_amilo_xi3650_forced_release_keys,
 	},
+	{
+		.ident = "Soltech Corporation TA12",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TA12"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkdb_soltech_ta12_forced_release_keys,
+	},
 	{ }
 };
 
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 2157cd7de00..efed0c9e242 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -29,7 +29,8 @@
 struct gpio_button_data {
 	struct gpio_keys_button *button;
 	struct input_dev *input;
-	struct delayed_work work;
+	struct timer_list timer;
+	struct work_struct work;
 };
 
 struct gpio_keys_drvdata {
@@ -40,7 +41,7 @@ struct gpio_keys_drvdata {
 static void gpio_keys_report_event(struct work_struct *work)
 {
 	struct gpio_button_data *bdata =
-		container_of(work, struct gpio_button_data, work.work);
+		container_of(work, struct gpio_button_data, work);
 	struct gpio_keys_button *button = bdata->button;
 	struct input_dev *input = bdata->input;
 	unsigned int type = button->type ?: EV_KEY;
@@ -50,17 +51,25 @@ static void gpio_keys_report_event(struct work_struct *work)
 	input_sync(input);
 }
 
+static void gpio_keys_timer(unsigned long _data)
+{
+	struct gpio_button_data *data = (struct gpio_button_data *)_data;
+
+	schedule_work(&data->work);
+}
+
 static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
 {
 	struct gpio_button_data *bdata = dev_id;
 	struct gpio_keys_button *button = bdata->button;
-	unsigned long delay;
 
 	BUG_ON(irq != gpio_to_irq(button->gpio));
 
-	delay = button->debounce_interval ?
-			msecs_to_jiffies(button->debounce_interval) : 0;
-	schedule_delayed_work(&bdata->work, delay);
+	if (button->debounce_interval)
+		mod_timer(&bdata->timer,
+			jiffies + msecs_to_jiffies(button->debounce_interval));
+	else
+		schedule_work(&bdata->work);
 
 	return IRQ_HANDLED;
 }
@@ -107,7 +116,9 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 
 		bdata->input = input;
 		bdata->button = button;
-		INIT_DELAYED_WORK(&bdata->work, gpio_keys_report_event);
+		setup_timer(&bdata->timer,
+			    gpio_keys_timer, (unsigned long)bdata);
+		INIT_WORK(&bdata->work, gpio_keys_report_event);
 
 		error = gpio_request(button->gpio, button->desc ?: "gpio_keys");
 		if (error < 0) {
@@ -166,7 +177,9 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
  fail2:
 	while (--i >= 0) {
 		free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
-		cancel_delayed_work_sync(&ddata->data[i].work);
+		if (pdata->buttons[i].debounce_interval)
+			del_timer_sync(&ddata->data[i].timer);
+		cancel_work_sync(&ddata->data[i].work);
 		gpio_free(pdata->buttons[i].gpio);
 	}
 
@@ -190,7 +203,9 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
 	for (i = 0; i < pdata->nbuttons; i++) {
 		int irq = gpio_to_irq(pdata->buttons[i].gpio);
 		free_irq(irq, &ddata->data[i]);
-		cancel_delayed_work_sync(&ddata->data[i].work);
+		if (pdata->buttons[i].debounce_interval)
+			del_timer_sync(&ddata->data[i].timer);
+		cancel_work_sync(&ddata->data[i].work);
 		gpio_free(pdata->buttons[i].gpio);
 	}
 
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
new file mode 100644
index 00000000000..541b981ff07
--- /dev/null
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -0,0 +1,453 @@
+/*
+ *  GPIO driven matrix keyboard driver
+ *
+ *  Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  Based on corgikbd.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
+
+struct matrix_keypad {
+	const struct matrix_keypad_platform_data *pdata;
+	struct input_dev *input_dev;
+	unsigned short *keycodes;
+	unsigned int row_shift;
+
+	uint32_t last_key_state[MATRIX_MAX_COLS];
+	struct delayed_work work;
+	bool scan_pending;
+	bool stopped;
+	spinlock_t lock;
+};
+
+/*
+ * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause
+ * minmal side effect when scanning other columns, here it is configured to
+ * be input, and it should work on most platforms.
+ */
+static void __activate_col(const struct matrix_keypad_platform_data *pdata,
+			   int col, bool on)
+{
+	bool level_on = !pdata->active_low;
+
+	if (on) {
+		gpio_direction_output(pdata->col_gpios[col], level_on);
+	} else {
+		gpio_set_value_cansleep(pdata->col_gpios[col], !level_on);
+		gpio_direction_input(pdata->col_gpios[col]);
+	}
+}
+
+static void activate_col(const struct matrix_keypad_platform_data *pdata,
+			 int col, bool on)
+{
+	__activate_col(pdata, col, on);
+
+	if (on && pdata->col_scan_delay_us)
+		udelay(pdata->col_scan_delay_us);
+}
+
+static void activate_all_cols(const struct matrix_keypad_platform_data *pdata,
+			      bool on)
+{
+	int col;
+
+	for (col = 0; col < pdata->num_col_gpios; col++)
+		__activate_col(pdata, col, on);
+}
+
+static bool row_asserted(const struct matrix_keypad_platform_data *pdata,
+			 int row)
+{
+	return gpio_get_value_cansleep(pdata->row_gpios[row]) ?
+			!pdata->active_low : pdata->active_low;
+}
+
+static void enable_row_irqs(struct matrix_keypad *keypad)
+{
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	for (i = 0; i < pdata->num_row_gpios; i++)
+		enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+}
+
+static void disable_row_irqs(struct matrix_keypad *keypad)
+{
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	for (i = 0; i < pdata->num_row_gpios; i++)
+		disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+}
+
+/*
+ * This gets the keys from keyboard and reports it to input subsystem
+ */
+static void matrix_keypad_scan(struct work_struct *work)
+{
+	struct matrix_keypad *keypad =
+		container_of(work, struct matrix_keypad, work.work);
+	struct input_dev *input_dev = keypad->input_dev;
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	uint32_t new_state[MATRIX_MAX_COLS];
+	int row, col, code;
+
+	/* de-activate all columns for scanning */
+	activate_all_cols(pdata, false);
+
+	memset(new_state, 0, sizeof(new_state));
+
+	/* assert each column and read the row status out */
+	for (col = 0; col < pdata->num_col_gpios; col++) {
+
+		activate_col(pdata, col, true);
+
+		for (row = 0; row < pdata->num_row_gpios; row++)
+			new_state[col] |=
+				row_asserted(pdata, row) ? (1 << row) : 0;
+
+		activate_col(pdata, col, false);
+	}
+
+	for (col = 0; col < pdata->num_col_gpios; col++) {
+		uint32_t bits_changed;
+
+		bits_changed = keypad->last_key_state[col] ^ new_state[col];
+		if (bits_changed == 0)
+			continue;
+
+		for (row = 0; row < pdata->num_row_gpios; row++) {
+			if ((bits_changed & (1 << row)) == 0)
+				continue;
+
+			code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+			input_event(input_dev, EV_MSC, MSC_SCAN, code);
+			input_report_key(input_dev,
+					 keypad->keycodes[code],
+					 new_state[col] & (1 << row));
+		}
+	}
+	input_sync(input_dev);
+
+	memcpy(keypad->last_key_state, new_state, sizeof(new_state));
+
+	activate_all_cols(pdata, true);
+
+	/* Enable IRQs again */
+	spin_lock_irq(&keypad->lock);
+	keypad->scan_pending = false;
+	enable_row_irqs(keypad);
+	spin_unlock_irq(&keypad->lock);
+}
+
+static irqreturn_t matrix_keypad_interrupt(int irq, void *id)
+{
+	struct matrix_keypad *keypad = id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&keypad->lock, flags);
+
+	/*
+	 * See if another IRQ beaten us to it and scheduled the
+	 * scan already. In that case we should not try to
+	 * disable IRQs again.
+	 */
+	if (unlikely(keypad->scan_pending || keypad->stopped))
+		goto out;
+
+	disable_row_irqs(keypad);
+	keypad->scan_pending = true;
+	schedule_delayed_work(&keypad->work,
+		msecs_to_jiffies(keypad->pdata->debounce_ms));
+
+out:
+	spin_unlock_irqrestore(&keypad->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static int matrix_keypad_start(struct input_dev *dev)
+{
+	struct matrix_keypad *keypad = input_get_drvdata(dev);
+
+	keypad->stopped = false;
+	mb();
+
+	/*
+	 * Schedule an immediate key scan to capture current key state;
+	 * columns will be activated and IRQs be enabled after the scan.
+	 */
+	schedule_delayed_work(&keypad->work, 0);
+
+	return 0;
+}
+
+static void matrix_keypad_stop(struct input_dev *dev)
+{
+	struct matrix_keypad *keypad = input_get_drvdata(dev);
+
+	keypad->stopped = true;
+	mb();
+	flush_work(&keypad->work.work);
+	/*
+	 * matrix_keypad_scan() will leave IRQs enabled;
+	 * we should disable them now.
+	 */
+	disable_row_irqs(keypad);
+}
+
+#ifdef CONFIG_PM
+static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	matrix_keypad_stop(keypad->input_dev);
+
+	if (device_may_wakeup(&pdev->dev))
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			enable_irq_wake(gpio_to_irq(pdata->row_gpios[i]));
+
+	return 0;
+}
+
+static int matrix_keypad_resume(struct platform_device *pdev)
+{
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	if (device_may_wakeup(&pdev->dev))
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			disable_irq_wake(gpio_to_irq(pdata->row_gpios[i]));
+
+	matrix_keypad_start(keypad->input_dev);
+
+	return 0;
+}
+#else
+#define matrix_keypad_suspend	NULL
+#define matrix_keypad_resume	NULL
+#endif
+
+static int __devinit init_matrix_gpio(struct platform_device *pdev,
+					struct matrix_keypad *keypad)
+{
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i, err = -EINVAL;
+
+	/* initialized strobe lines as outputs, activated */
+	for (i = 0; i < pdata->num_col_gpios; i++) {
+		err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col");
+		if (err) {
+			dev_err(&pdev->dev,
+				"failed to request GPIO%d for COL%d\n",
+				pdata->col_gpios[i], i);
+			goto err_free_cols;
+		}
+
+		gpio_direction_output(pdata->col_gpios[i], !pdata->active_low);
+	}
+
+	for (i = 0; i < pdata->num_row_gpios; i++) {
+		err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row");
+		if (err) {
+			dev_err(&pdev->dev,
+				"failed to request GPIO%d for ROW%d\n",
+				pdata->row_gpios[i], i);
+			goto err_free_rows;
+		}
+
+		gpio_direction_input(pdata->row_gpios[i]);
+	}
+
+	for (i = 0; i < pdata->num_row_gpios; i++) {
+		err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+				matrix_keypad_interrupt,
+				IRQF_DISABLED |
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"matrix-keypad", keypad);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Unable to acquire interrupt for GPIO line %i\n",
+				pdata->row_gpios[i]);
+			goto err_free_irqs;
+		}
+	}
+
+	/* initialized as disabled - enabled by input->open */
+	disable_row_irqs(keypad);
+	return 0;
+
+err_free_irqs:
+	while (--i >= 0)
+		free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+	i = pdata->num_row_gpios;
+err_free_rows:
+	while (--i >= 0)
+		gpio_free(pdata->row_gpios[i]);
+	i = pdata->num_col_gpios;
+err_free_cols:
+	while (--i >= 0)
+		gpio_free(pdata->col_gpios[i]);
+
+	return err;
+}
+
+static int __devinit matrix_keypad_probe(struct platform_device *pdev)
+{
+	const struct matrix_keypad_platform_data *pdata;
+	const struct matrix_keymap_data *keymap_data;
+	struct matrix_keypad *keypad;
+	struct input_dev *input_dev;
+	unsigned short *keycodes;
+	unsigned int row_shift;
+	int i;
+	int err;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	keymap_data = pdata->keymap_data;
+	if (!keymap_data) {
+		dev_err(&pdev->dev, "no keymap data defined\n");
+		return -EINVAL;
+	}
+
+	row_shift = get_count_order(pdata->num_col_gpios);
+
+	keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
+	keycodes = kzalloc((pdata->num_row_gpios << row_shift) *
+				sizeof(*keycodes),
+			   GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!keypad || !keycodes || !input_dev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	keypad->input_dev = input_dev;
+	keypad->pdata = pdata;
+	keypad->keycodes = keycodes;
+	keypad->row_shift = row_shift;
+	keypad->stopped = true;
+	INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
+	spin_lock_init(&keypad->lock);
+
+	input_dev->name		= pdev->name;
+	input_dev->id.bustype	= BUS_HOST;
+	input_dev->dev.parent	= &pdev->dev;
+	input_dev->evbit[0]	= BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_dev->open		= matrix_keypad_start;
+	input_dev->close	= matrix_keypad_stop;
+
+	input_dev->keycode	= keycodes;
+	input_dev->keycodesize	= sizeof(*keycodes);
+	input_dev->keycodemax	= pdata->num_row_gpios << keypad->row_shift;
+
+	for (i = 0; i < keymap_data->keymap_size; i++) {
+		unsigned int key = keymap_data->keymap[i];
+		unsigned int row = KEY_ROW(key);
+		unsigned int col = KEY_COL(key);
+		unsigned short code = KEY_VAL(key);
+
+		keycodes[MATRIX_SCAN_CODE(row, col, row_shift)] = code;
+		__set_bit(code, input_dev->keybit);
+	}
+	__clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input_dev, keypad);
+
+	err = init_matrix_gpio(pdev, keypad);
+	if (err)
+		goto err_free_mem;
+
+	err = input_register_device(keypad->input_dev);
+	if (err)
+		goto err_free_mem;
+
+	device_init_wakeup(&pdev->dev, pdata->wakeup);
+	platform_set_drvdata(pdev, keypad);
+
+	return 0;
+
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(keycodes);
+	kfree(keypad);
+	return err;
+}
+
+static int __devexit matrix_keypad_remove(struct platform_device *pdev)
+{
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	device_init_wakeup(&pdev->dev, 0);
+
+	for (i = 0; i < pdata->num_row_gpios; i++) {
+		free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+		gpio_free(pdata->row_gpios[i]);
+	}
+
+	for (i = 0; i < pdata->num_col_gpios; i++)
+		gpio_free(pdata->col_gpios[i]);
+
+	input_unregister_device(keypad->input_dev);
+	platform_set_drvdata(pdev, NULL);
+	kfree(keypad->keycodes);
+	kfree(keypad);
+
+	return 0;
+}
+
+static struct platform_driver matrix_keypad_driver = {
+	.probe		= matrix_keypad_probe,
+	.remove		= __devexit_p(matrix_keypad_remove),
+	.suspend	= matrix_keypad_suspend,
+	.resume		= matrix_keypad_resume,
+	.driver		= {
+		.name	= "matrix-keypad",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init matrix_keypad_init(void)
+{
+	return platform_driver_register(&matrix_keypad_driver);
+}
+
+static void __exit matrix_keypad_exit(void)
+{
+	platform_driver_unregister(&matrix_keypad_driver);
+}
+
+module_init(matrix_keypad_init);
+module_exit(matrix_keypad_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:matrix-keypad");
diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c
index 2adf9cb265d..d114d3a9e1e 100644
--- a/drivers/input/misc/cobalt_btns.c
+++ b/drivers/input/misc/cobalt_btns.c
@@ -1,7 +1,7 @@
 /*
  *  Cobalt button interface driver.
  *
- *  Copyright (C) 2007-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -148,7 +148,7 @@ static int __devexit cobalt_buttons_remove(struct platform_device *pdev)
 	return 0;
 }
 
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
 MODULE_DESCRIPTION("Cobalt button interface driver");
 MODULE_LICENSE("GPL");
 /* work with hotplug and coldplug */
diff --git a/drivers/input/misc/pcf50633-input.c b/drivers/input/misc/pcf50633-input.c
index 039dcb00ebd..008de0c5834 100644
--- a/drivers/input/misc/pcf50633-input.c
+++ b/drivers/input/misc/pcf50633-input.c
@@ -55,7 +55,6 @@ pcf50633_input_irq(int irq, void *data)
 static int __devinit pcf50633_input_probe(struct platform_device *pdev)
 {
 	struct pcf50633_input *input;
-	struct pcf50633_subdev_pdata *pdata = pdev->dev.platform_data;
 	struct input_dev *input_dev;
 	int ret;
 
@@ -71,7 +70,7 @@ static int __devinit pcf50633_input_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, input);
-	input->pcf = pdata->pcf;
+	input->pcf = dev_to_pcf50633(pdev->dev.parent);
 	input->input_dev = input_dev;
 
 	input_dev->name = "PCF50633 PMU events";
@@ -85,9 +84,9 @@ static int __devinit pcf50633_input_probe(struct platform_device *pdev)
 		kfree(input);
 		return ret;
 	}
-	pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ONKEYR,
+	pcf50633_register_irq(input->pcf, PCF50633_IRQ_ONKEYR,
 				pcf50633_input_irq, input);
-	pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ONKEYF,
+	pcf50633_register_irq(input->pcf, PCF50633_IRQ_ONKEYF,
 				pcf50633_input_irq, input);
 
 	return 0;
diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c
index 6d67af5387a..21cb755a54f 100644
--- a/drivers/input/misc/pcspkr.c
+++ b/drivers/input/misc/pcspkr.c
@@ -114,7 +114,7 @@ static int __devexit pcspkr_remove(struct platform_device *dev)
 	return 0;
 }
 
-static int pcspkr_suspend(struct platform_device *dev, pm_message_t state)
+static int pcspkr_suspend(struct device *dev)
 {
 	pcspkr_event(NULL, EV_SND, SND_BELL, 0);
 
@@ -127,14 +127,18 @@ static void pcspkr_shutdown(struct platform_device *dev)
 	pcspkr_event(NULL, EV_SND, SND_BELL, 0);
 }
 
+static struct dev_pm_ops pcspkr_pm_ops = {
+	.suspend = pcspkr_suspend,
+};
+
 static struct platform_driver pcspkr_platform_driver = {
 	.driver		= {
 		.name	= "pcspkr",
 		.owner	= THIS_MODULE,
+		.pm	= &pcspkr_pm_ops,
 	},
 	.probe		= pcspkr_probe,
 	.remove		= __devexit_p(pcspkr_remove),
-	.suspend	= pcspkr_suspend,
 	.shutdown	= pcspkr_shutdown,
 };
 
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 7c8957dd22c..27ee976eb54 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -611,6 +611,20 @@ static struct key_entry keymap_wistron_generic[] __initdata = {
 	{ KE_END, 0 }
 };
 
+static struct key_entry keymap_prestigio[] __initdata = {
+	{ KE_KEY,  0x11, {KEY_PROG1} },
+	{ KE_KEY,  0x12, {KEY_PROG2} },
+	{ KE_WIFI,  0x30 },
+	{ KE_KEY,  0x22, {KEY_REWIND} },
+	{ KE_KEY,  0x23, {KEY_FORWARD} },
+	{ KE_KEY,  0x24, {KEY_PLAYPAUSE} },
+	{ KE_KEY,  0x25, {KEY_STOPCD} },
+	{ KE_KEY,  0x31, {KEY_MAIL} },
+	{ KE_KEY,  0x36, {KEY_WWW} },
+	{ KE_END,  0 }
+};
+
+
 /*
  * If your machine is not here (which is currently rather likely), please send
  * a list of buttons and their key codes (reported when loading this module
@@ -646,6 +660,15 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 	},
 	{
 		.callback = dmi_matched,
+		.ident = "Maxdata Pro 7000 DX",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MAXDATA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Pro 7000"),
+		},
+		.driver_data = keymap_fs_amilo_pro_v2000
+	},
+	{
+		.callback = dmi_matched,
 		.ident = "Fujitsu N3510",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
@@ -962,6 +985,8 @@ static int __init select_keymap(void)
 	if (keymap_name != NULL) {
 		if (strcmp (keymap_name, "1557/MS2141") == 0)
 			keymap = keymap_wistron_ms2141;
+		else if (strcmp (keymap_name, "prestigio") == 0)
+			keymap = keymap_prestigio;
 		else if (strcmp (keymap_name, "generic") == 0)
 			keymap = keymap_wistron_generic;
 		else {
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 5e5eb88d8d1..7b6ce178f1b 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -46,7 +46,7 @@ static void gpio_mouse_scan(struct input_polled_dev *dev)
 	input_sync(input);
 }
 
-static int __init gpio_mouse_probe(struct platform_device *pdev)
+static int __devinit gpio_mouse_probe(struct platform_device *pdev)
 {
 	struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
 	struct input_polled_dev *input_poll;
@@ -170,10 +170,8 @@ static int __devexit gpio_mouse_remove(struct platform_device *pdev)
 	return 0;
 }
 
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:gpio_mouse");
-
 static struct platform_driver gpio_mouse_device_driver = {
+	.probe		= gpio_mouse_probe,
 	.remove		= __devexit_p(gpio_mouse_remove),
 	.driver		= {
 		.name	= "gpio_mouse",
@@ -183,8 +181,7 @@ static struct platform_driver gpio_mouse_device_driver = {
 
 static int __init gpio_mouse_init(void)
 {
-	return platform_driver_probe(&gpio_mouse_device_driver,
-			gpio_mouse_probe);
+	return platform_driver_register(&gpio_mouse_device_driver);
 }
 module_init(gpio_mouse_init);
 
@@ -197,3 +194,5 @@ module_exit(gpio_mouse_exit);
 MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
 MODULE_DESCRIPTION("GPIO mouse driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */
+
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index b587e2d576a..820e51673b2 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -296,7 +296,7 @@ static void hp_sdc_mlc_out(hil_mlc *mlc)
 	priv->tseq[3] = 0;
 	if (mlc->opacket & HIL_CTRL_APE) {
 		priv->tseq[3] |= HP_SDC_LPC_APE_IPF;
-		down_trylock(&mlc->csem);
+		BUG_ON(down_trylock(&mlc->csem));
 	}
  enqueue:
 	hp_sdc_enqueue_transaction(&priv->trans);
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index fb8a3cd3ffd..ccbf23ece8e 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -78,6 +78,14 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
+		.ident = "ASUS G1S",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc."),
+			DMI_MATCH(DMI_BOARD_NAME, "G1S"),
+			DMI_MATCH(DMI_BOARD_VERSION, "1.0"),
+		},
+	},
+	{
 		/* AUX LOOP command does not raise AUX IRQ */
 		.ident = "ASUS P65UP5",
 		.matches = {
@@ -374,6 +382,14 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro1510"),
 		},
 	},
+	{
+		.ident = "Acer Aspire 5536",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5536"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
+		},
+	},
 	{ }
 };
 
@@ -392,6 +408,34 @@ static struct dmi_system_id __initdata i8042_dmi_reset_table[] = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
 		},
 	},
+	{
+		.ident = "Acer Aspire One 150",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"),
+		},
+	},
+	{
+		.ident = "Advent 4211",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"),
+		},
+	},
+	{
+		.ident = "Medion Akoya Mini E1210",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E1210"),
+		},
+	},
+	{
+		.ident = "Mivvy M310",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "N10"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index f919bf57293..582245c497e 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -934,10 +934,11 @@ static bool i8042_suspended;
 
 static int i8042_suspend(struct platform_device *dev, pm_message_t state)
 {
-	if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) {
+	if (!i8042_suspended && state.event == PM_EVENT_SUSPEND)
 		i8042_controller_reset();
-		i8042_suspended = true;
-	}
+
+	i8042_suspended = state.event == PM_EVENT_SUSPEND ||
+			  state.event == PM_EVENT_FREEZE;
 
 	return 0;
 }
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index fb17573f8f2..d66f4944f2a 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -935,10 +935,11 @@ static int serio_suspend(struct device *dev, pm_message_t state)
 {
 	struct serio *serio = to_serio_port(dev);
 
-	if (!serio->suspended && state.event == PM_EVENT_SUSPEND) {
+	if (!serio->suspended && state.event == PM_EVENT_SUSPEND)
 		serio_cleanup(serio);
-		serio->suspended = true;
-	}
+
+	serio->suspended = state.event == PM_EVENT_SUSPEND ||
+			   state.event == PM_EVENT_FREEZE;
 
 	return 0;
 }
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index a9d5031b855..ea30c983a33 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -388,6 +388,32 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 	return result;
 }
 
+static int wacom_query_tablet_data(struct usb_interface *intf)
+{
+	unsigned char *rep_data;
+	int limit = 0;
+	int error;
+
+	rep_data = kmalloc(2, GFP_KERNEL);
+	if (!rep_data)
+		return -ENOMEM;
+
+	do {
+		rep_data[0] = 2;
+		rep_data[1] = 2;
+		error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
+					2, rep_data, 2);
+		if (error >= 0)
+			error = usb_get_report(intf,
+						WAC_HID_FEATURE_REPORT, 2,
+						rep_data, 2);
+	} while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
+
+	kfree(rep_data);
+
+	return error < 0 ? error : 0;
+}
+
 static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
 	struct usb_device *dev = interface_to_usbdev(intf);
@@ -398,7 +424,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	struct wacom_features *features;
 	struct input_dev *input_dev;
 	int error = -ENOMEM;
-	char rep_data[2], limit = 0;
 	struct hid_descriptor *hid_desc;
 
 	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
@@ -489,20 +514,10 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	/*
 	 * Ask the tablet to report tablet data if it is not a Tablet PC.
-	 * Repeat until it succeeds
+	 * Note that if query fails it is not a hard failure.
 	 */
-	if (wacom_wac->features->type != TABLETPC) {
-		do {
-			rep_data[0] = 2;
-			rep_data[1] = 2;
-			error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
-						2, rep_data, 2);
-			if (error >= 0)
-				error = usb_get_report(intf,
-						WAC_HID_FEATURE_REPORT, 2,
-						rep_data, 2);
-		} while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
-	}
+	if (wacom_wac->features->type != TABLETPC)
+		wacom_query_tablet_data(intf);
 
 	usb_set_intfdata(intf, wacom);
 	return 0;
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 38bf86384ae..c896d6a21b7 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -384,6 +384,8 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_key(wcombo, BTN_STYLUS2, 0);
 			wacom_report_key(wcombo, BTN_TOUCH, 0);
 			wacom_report_abs(wcombo, ABS_WHEEL, 0);
+			if (wacom->features->type >= INTUOS3S)
+				wacom_report_abs(wcombo, ABS_Z, 0);
 		}
 		wacom_report_key(wcombo, wacom->tool[idx], 0);
 		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
@@ -836,6 +838,7 @@ static struct wacom_features wacom_features[] = {
 	{ "Wacom DTU710",        8,  34080, 27660,  511,  0, PL },
 	{ "Wacom DTF521",        8,   6282,  4762,  511,  0, PL },
 	{ "Wacom DTF720",        8,   6858,  5506,  511,  0, PL },
+	{ "Wacom DTF720a",       8,   6858,  5506,  511,  0, PL },
 	{ "Wacom Cintiq Partner",8,  20480, 15360,  511,  0, PTU },
 	{ "Wacom Intuos2 4x5",   10, 12700, 10600, 1023, 31, INTUOS },
 	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 31, INTUOS },
@@ -897,8 +900,9 @@ static struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC2) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 72e2712c7e2..f8c4dd2226b 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -11,6 +11,68 @@ menuconfig INPUT_TOUCHSCREEN
 
 if INPUT_TOUCHSCREEN
 
+menuconfig TOUCHSCREEN_FILTER
+	boolean "Touchscreen Filtering"
+	depends on INPUT_TOUCHSCREEN
+	select TOUCHSCREEN_FILTER_GROUP
+	select TOUCHSCREEN_FILTER_MEDIAN
+	select TOUCHSCREEN_FILTER_MEAN
+	select TOUCHSCREEN_FILTER_LINEAR
+	help
+	  Select this to include kernel touchscreen filter support.  The filters
+	  can be combined in any order in your machine init and the parameters
+	  for them can also be set there.
+
+config TOUCHSCREEN_FILTER_GROUP
+	bool "Group Touchscreen Filter"
+	depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
+	default Y
+	help
+	  Say Y here if you want to use the Group touchscreen filter, it
+	  avoids using atypical samples.
+
+config TOUCHSCREEN_FILTER_MEDIAN
+	bool "Median Average Touchscreen Filter"
+	depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
+	default Y
+	help
+	  Say Y here if you want to use the Median touchscreen filter, it's
+	  highly effective if you data is noisy with occasional excursions.
+
+config TOUCHSCREEN_FILTER_MEAN
+	bool "Mean Average Touchscreen Filter"
+	depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
+	default Y
+	help
+	  Say Y here if you want to use the Mean touchscreen filter, it
+	  can further improve decent quality data by removing jitter
+
+config TOUCHSCREEN_FILTER_LINEAR
+	bool "Linear Touchscreen Filter"
+	depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
+	default Y
+	help
+	  Say Y here if you want to use the Linear touchscreen filter, it
+	  enables the use of calibration data for the touchscreen.
+
+config TOUCHSCREEN_S3C2410
+	tristate "Samsung S3C2410 touchscreen input driver"
+	depends on ARCH_S3C2410 && INPUT && INPUT_TOUCHSCREEN
+	select SERIO
+	help
+	  Say Y here if you have the s3c2410 touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called s3c2410_ts.
+
+config TOUCHSCREEN_S3C2410_DEBUG
+	boolean "Samsung S3C2410 touchscreen debug messages"
+	depends on TOUCHSCREEN_S3C2410
+	help
+	  Select this if you want debug messages
+
 config TOUCHSCREEN_ADS7846
 	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
 	depends on SPI_MASTER
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 3e1c5e0b952..dafec0b5e3f 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -40,3 +40,9 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL)	+= atmel-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_W90X900)	+= w90p910_ts.o
+obj-$(CONFIG_TOUCHSCREEN_FILTER)	+= ts_filter_chain.o
+obj-$(CONFIG_TOUCHSCREEN_FILTER_GROUP)	+= ts_filter_group.o
+obj-$(CONFIG_TOUCHSCREEN_FILTER_LINEAR)	+= ts_filter_linear.o
+obj-$(CONFIG_TOUCHSCREEN_FILTER_MEDIAN)	+= ts_filter_median.o
+obj-$(CONFIG_TOUCHSCREEN_FILTER_MEAN)	+= ts_filter_mean.o
+obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
new file mode 100644
index 00000000000..db083a16284
--- /dev/null
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -0,0 +1,552 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ * iPAQ H1940 touchscreen support
+ *
+ * ChangeLog
+ *
+ * 2004-09-05: Herbert Pötzl <herbert@13thfloor.at>
+ *      - Added clock (de-)allocation code
+ *
+ * 2005-03-06: Arnaud Patard <arnaud.patard@rtp-net.org>
+ *      - h1940_ -> s3c2410 (this driver is now also used on the n30
+ *        machines :P)
+ *      - Debug messages are now enabled with the config option
+ *        TOUCHSCREEN_S3C2410_DEBUG
+ *      - Changed the way the value are read
+ *      - Input subsystem should now work
+ *      - Use ioremap and readl/writel
+ *
+ * 2005-03-23: Arnaud Patard <arnaud.patard@rtp-net.org>
+ *      - Make use of some undocumented features of the touchscreen
+ *        controller
+ *
+ * 2007-05-23: Harald Welte <laforge@openmoko.org>
+ *      - Add proper support for S32440
+ *
+ * 2008-06-23: Andy Green <andy@warmcat.com>
+ *      - Removed averaging system
+ *      - Added generic Touchscreen filter stuff
+ *
+ * 2008-11-27: Nelson Castillo <arhuaco@freaks-unidos.net>
+ *      - Improve interrupt handling
+ *
+ * 2009-04-09: Nelson Castillo <arhuaco@freaks-unidos.net>
+ *      - Use s3c-adc API (Vasily Khoruzhick <anarsoul@gmail.com> provided
+ *        a working example for a simpler version of this driver).
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/timer.h>
+#include <linux/kfifo.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-nrs.h>
+#include <mach/gpio-fns.h>
+#include <mach/ts.h>
+#include <mach/hardware.h>
+#include <plat/regs-adc.h>
+#include <plat/adc.h>
+
+#include <linux/input/touchscreen/ts_filter_chain.h>
+
+/* For ts.dev.id.version */
+#define S3C2410TSVERSION	0x0101
+
+#define WAIT4INT(x)		(((x)<<8) | \
+				S3C2410_ADCTSC_YM_SEN | \
+				S3C2410_ADCTSC_YP_SEN | \
+				S3C2410_ADCTSC_XP_SEN | \
+				S3C2410_ADCTSC_XY_PST(3))
+
+#define TSPRINTK(fmt, args...) \
+	printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+#	define DPRINTK TSPRINTK
+#else
+#	define DPRINTK(fmt, args...)
+#endif
+
+
+MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
+MODULE_DESCRIPTION("s3c2410 touchscreen driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+static char *s3c2410ts_name = "s3c2410 TouchScreen";
+
+#define TS_RELEASE_TIMEOUT (HZ >> 7 ? HZ >> 7 : 1) /* 8ms (5ms if HZ is 200) */
+#define TS_EVENT_FIFO_SIZE (2 << 6) /* Must be a power of 2. */
+
+/*
+ * Per-touchscreen data.
+ */
+
+enum	ts_state {TS_STATE_STANDBY, TS_STATE_PRESSED, TS_STATE_RELEASE_PENDING,
+		  TS_STATE_RELEASE};
+
+struct s3c2410ts {
+	struct input_dev *dev;
+	struct ts_filter_chain *chain;
+	enum ts_state state;
+	int is_down;
+	struct kfifo *event_fifo;
+	struct s3c_adc_client *adc_client;
+	unsigned adc_selected;
+};
+
+static struct s3c2410ts ts;
+
+static void __iomem *base_addr;
+
+/*
+ * A few low level functions.
+ */
+
+static inline void s3c2410_ts_connect(void)
+{
+	s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
+}
+
+/*
+ * Code that starts ADC conversions.
+ */
+
+static void ts_adc_timer_f(unsigned long data);
+static struct timer_list ts_adc_timer = TIMER_INITIALIZER(ts_adc_timer_f, 0, 0);
+
+static void ts_adc_timer_f(unsigned long data)
+{
+	if (s3c_adc_start(ts.adc_client, 0, 1))
+		mod_timer(&ts_adc_timer, jiffies + 1);
+}
+
+static void s3c2410_ts_start_adc_conversion(void)
+{
+	if (ts.adc_selected)
+		mod_timer(&ts_adc_timer, jiffies + 1);
+	else
+		ts_adc_timer_f(0);
+}
+
+/* Callback for the s3c-adc API. */
+void adc_selected_f(unsigned selected)
+{
+	ts.adc_selected = selected;
+}
+
+/*
+ * Just send the input events.
+ */
+
+enum ts_input_event {IE_DOWN = 0, IE_UP};
+
+static void ts_input_report(int event, int coords[])
+{
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+	static char *s[] = {"down", "up"};
+	struct timeval tv;
+
+	do_gettimeofday(&tv);
+#endif
+
+	if (event == IE_DOWN) {
+		input_report_abs(ts.dev, ABS_X, coords[0]);
+		input_report_abs(ts.dev, ABS_Y, coords[1]);
+		input_report_key(ts.dev, BTN_TOUCH, 1);
+		input_report_abs(ts.dev, ABS_PRESSURE, 1);
+
+		DPRINTK("T:%06d %6s (X:%03d, Y:%03d)\n",
+			(int)tv.tv_usec, s[event], coords[0], coords[1]);
+	} else {
+		input_report_key(ts.dev, BTN_TOUCH, 0);
+		input_report_abs(ts.dev, ABS_PRESSURE, 0);
+
+		DPRINTK("T:%06d %6s\n",
+			(int)tv.tv_usec, s[event]);
+	}
+
+	input_sync(ts.dev);
+}
+
+/*
+ * Manage the state of the touchscreen.
+ */
+
+static void event_send_timer_f(unsigned long data);
+
+static struct timer_list event_send_timer =
+		TIMER_INITIALIZER(event_send_timer_f, 0, 0);
+
+static void event_send_timer_f(unsigned long data)
+{
+	static int noop_counter;
+	int event_type;
+
+	while (__kfifo_get(ts.event_fifo, (unsigned char *)&event_type,
+			   sizeof(int))) {
+		int buf[2];
+
+		switch (event_type) {
+		case 'D':
+			if (ts.state == TS_STATE_RELEASE_PENDING)
+				/* Ignore short UP event. */
+				ts.state = TS_STATE_PRESSED;
+			break;
+
+		case 'U':
+			ts.state = TS_STATE_RELEASE_PENDING;
+			break;
+
+		case 'P':
+			if (ts.is_down) /* Stylus_action needs a conversion. */
+				s3c2410_ts_start_adc_conversion();
+
+			if (unlikely(__kfifo_get(ts.event_fifo,
+						 (unsigned char *)buf,
+						 sizeof(int) * 2)
+				     != sizeof(int) * 2)) {
+				/* This will only happen if we have a bug. */
+				TSPRINTK("Invalid packet\n");
+				return;
+			}
+
+			ts_input_report(IE_DOWN, buf);
+			ts.state = TS_STATE_PRESSED;
+			break;
+		}
+
+		noop_counter = 0;
+	}
+
+	if (noop_counter++ >= 1) {
+		noop_counter = 0;
+		if (ts.state == TS_STATE_RELEASE_PENDING) {
+			/*
+			 * We delay the UP event for a while to avoid jitter.
+			 * If we get a DOWN event we do not send it.
+			 */
+			ts_input_report(IE_UP, NULL);
+			ts.state = TS_STATE_STANDBY;
+
+			ts_filter_chain_clear(ts.chain);
+		}
+	} else {
+		mod_timer(&event_send_timer, jiffies + TS_RELEASE_TIMEOUT);
+	}
+}
+
+/*
+ * Manage interrupts.
+ */
+
+static irqreturn_t stylus_updown(int irq, void *dev_id)
+{
+	unsigned long data0;
+	unsigned long data1;
+	int event_type;
+
+	data0 = readl(base_addr + S3C2410_ADCDAT0);
+	data1 = readl(base_addr + S3C2410_ADCDAT1);
+
+	ts.is_down = !(data0 & S3C2410_ADCDAT0_UPDOWN) &&
+		     !(data1 & S3C2410_ADCDAT0_UPDOWN);
+
+	event_type = ts.is_down ? 'D' : 'U';
+
+	if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)&event_type,
+		     sizeof(int)) != sizeof(int)))
+		/* Only happens if we have a bug. */
+		TSPRINTK("FIFO full\n");
+
+	if (ts.is_down)
+		s3c2410_ts_start_adc_conversion();
+	else
+		writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC);
+
+	mod_timer(&event_send_timer, jiffies + 1);
+
+	return IRQ_HANDLED;
+}
+
+static void stylus_adc_action(unsigned p0, unsigned p1, unsigned *conv_left)
+{
+	int buf[3];
+
+	/* TODO: Do we really need this? */
+	if (p0 & S3C2410_ADCDAT0_AUTO_PST ||
+	    p1 & S3C2410_ADCDAT1_AUTO_PST) {
+		*conv_left = 1;
+		return;
+	}
+
+	buf[1] = p0;
+	buf[2] = p1;
+
+	switch (ts_filter_chain_feed(ts.chain, &buf[1])) {
+	case 0:
+		/* The filter wants more points. */
+		*conv_left = 1;
+		return;
+	case 1:
+		/* We have a point from the filters or no filtering enabled. */
+		buf[0] = 'P';
+		break;
+	default:
+		TSPRINTK("invalid return value\n");
+	case -1:
+		/* Too much noise. Ignore the event. */
+		ts_filter_chain_clear(ts.chain);
+		writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC);
+		return;
+	};
+
+	if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)buf,
+		     sizeof(int) * 3) != sizeof(int) * 3))
+		/* This will only happen if we have a bug. */
+		TSPRINTK("FIFO full\n");
+
+	writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC);
+	mod_timer(&event_send_timer, jiffies + 1);
+
+	return;
+}
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init s3c2410ts_probe(struct platform_device *pdev)
+{
+	int rc;
+	struct s3c2410_ts_mach_info *info;
+	struct input_dev *input_dev;
+	int ret = 0;
+
+	dev_info(&pdev->dev, "Starting\n");
+
+	info = (struct s3c2410_ts_mach_info *)pdev->dev.platform_data;
+
+	if (!info) {
+		dev_err(&pdev->dev, "No platform data\n");
+		return -EINVAL;
+	}
+
+	base_addr = ioremap(S3C2410_PA_ADC, 0x20);
+	if (base_addr == NULL) {
+		dev_err(&pdev->dev, "Failed to remap register block\n");
+		ret = -ENOMEM;
+		goto bail0;
+	}
+
+	/* If we acutally are a S3C2410: Configure GPIOs */
+	if (!strcmp(pdev->name, "s3c2410-ts"))
+		s3c2410_ts_connect();
+
+	writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC);
+
+	/* Initialise input stuff */
+	memset(&ts, 0, sizeof(struct s3c2410ts));
+
+	ts.adc_client =
+		s3c_adc_register(pdev, adc_selected_f, stylus_adc_action, 1);
+	if (!ts.adc_client) {
+		dev_err(&pdev->dev,
+			"Unable to register s3c2410_ts as s3_adc client\n");
+		iounmap(base_addr);
+		ret = -EIO;
+		goto bail0;
+	}
+
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		dev_err(&pdev->dev, "Unable to allocate the input device\n");
+		ret = -ENOMEM;
+		goto bail1;
+	}
+
+	ts.dev = input_dev;
+	ts.dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) |
+			   BIT_MASK(EV_ABS);
+	ts.dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(ts.dev, ABS_X, 0, 0x3FF, 0, 0);
+	input_set_abs_params(ts.dev, ABS_Y, 0, 0x3FF, 0, 0);
+	input_set_abs_params(ts.dev, ABS_PRESSURE, 0, 1, 0, 0);
+
+	ts.dev->name = s3c2410ts_name;
+	ts.dev->id.bustype = BUS_RS232;
+	ts.dev->id.vendor = 0xDEAD;
+	ts.dev->id.product = 0xBEEF;
+	ts.dev->id.version = S3C2410TSVERSION;
+	ts.state = TS_STATE_STANDBY;
+	ts.event_fifo = kfifo_alloc(TS_EVENT_FIFO_SIZE, GFP_KERNEL, NULL);
+	if (IS_ERR(ts.event_fifo)) {
+		ret = -EIO;
+		goto bail2;
+	}
+
+	/* Create the filter chain set up for the 2 coordinates we produce. */
+	ts.chain = ts_filter_chain_create(pdev, info->filter_config, 2);
+
+	if (IS_ERR(ts.chain))
+		goto bail2;
+
+	ts_filter_chain_clear(ts.chain);
+
+	/* Get IRQ. */
+	if (request_irq(IRQ_TC, stylus_updown, 0, "s3c2410_action", ts.dev)) {
+		dev_err(&pdev->dev, "Could not allocate ts IRQ_TC !\n");
+		iounmap(base_addr);
+		ret = -EIO;
+		goto bail3;
+	}
+
+	dev_info(&pdev->dev, "Successfully loaded\n");
+
+	/* All went ok. Register to the input system. */
+	rc = input_register_device(ts.dev);
+	if (rc) {
+		dev_info(&pdev->dev, "Could not register input device\n");
+		ret = -EIO;
+		goto bail4;
+	}
+
+	return 0;
+
+bail4:
+	free_irq(IRQ_TC, ts.dev);
+	iounmap(base_addr);
+	disable_irq(IRQ_TC);
+bail3:
+	ts_filter_chain_destroy(ts.chain);
+	kfifo_free(ts.event_fifo);
+bail2:
+	input_unregister_device(ts.dev);
+bail1:
+	iounmap(base_addr);
+bail0:
+
+	return ret;
+}
+
+static int s3c2410ts_remove(struct platform_device *pdev)
+{
+	disable_irq(IRQ_TC);
+	free_irq(IRQ_TC, ts.dev);
+
+	s3c_adc_release(ts.adc_client);
+	input_unregister_device(ts.dev);
+	iounmap(base_addr);
+
+	ts_filter_chain_destroy(ts.chain);
+
+	kfifo_free(ts.event_fifo);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+#define TSC_SLEEP	(S3C2410_ADCTSC_PULL_UP_DISABLE | \
+			 S3C2410_ADCTSC_XY_PST(0))
+
+static int s3c2410ts_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	writel(TSC_SLEEP, base_addr + S3C2410_ADCTSC);
+	writel(readl(base_addr + S3C2410_ADCCON) | S3C2410_ADCCON_STDBM,
+	       base_addr + S3C2410_ADCCON);
+	disable_irq(IRQ_TC);
+
+	return 0;
+}
+
+static int s3c2410ts_resume(struct platform_device *pdev)
+{
+	ts_filter_chain_clear(ts.chain);
+	enable_irq(IRQ_TC);
+	writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC);
+
+	return 0;
+}
+
+#else
+#define s3c2410ts_suspend NULL
+#define s3c2410ts_resume  NULL
+#endif
+
+static struct platform_driver s3c2410ts_driver = {
+	.driver = {
+		.name	= "s3c2410-ts",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= s3c2410ts_probe,
+	.remove		= s3c2410ts_remove,
+	.suspend	= s3c2410ts_suspend,
+	.resume		= s3c2410ts_resume,
+};
+
+static struct platform_driver s3c2440ts_driver = {
+	.driver = {
+		.name	= "s3c2440-ts",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= s3c2410ts_probe,
+	.remove		= s3c2410ts_remove,
+	.suspend	= s3c2410ts_suspend,
+	.resume		= s3c2410ts_resume,
+};
+
+static int __init s3c2410ts_init(void)
+{
+	int rc;
+
+	rc = platform_driver_register(&s3c2410ts_driver);
+	if (rc < 0)
+		return rc;
+
+	rc = platform_driver_register(&s3c2440ts_driver);
+	if (rc < 0)
+		platform_driver_unregister(&s3c2410ts_driver);
+
+	return rc;
+}
+
+static void __exit s3c2410ts_exit(void)
+{
+	platform_driver_unregister(&s3c2440ts_driver);
+	platform_driver_unregister(&s3c2410ts_driver);
+}
+
+module_init(s3c2410ts_init);
+module_exit(s3c2410ts_exit);
+
diff --git a/drivers/input/touchscreen/ts_filter_chain.c b/drivers/input/touchscreen/ts_filter_chain.c
new file mode 100644
index 00000000000..8b5e2145b27
--- /dev/null
+++ b/drivers/input/touchscreen/ts_filter_chain.c
@@ -0,0 +1,183 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008,2009 Andy Green <andy@warmcat.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include <linux/input/touchscreen/ts_filter_chain.h>
+#include <linux/input/touchscreen/ts_filter.h>
+
+/*
+ * Tux, would you like the following function in /lib?
+ * It helps us avoid silly code.
+ */
+
+/**
+ * sptrlen - Count how many non-null pointers are in a pointer array
+ * @arr: The array of pointers
+ */
+static int sptrlen(const void *arr)
+{
+	/* All pointers have the same size. */
+	const int **p = (const int **)arr;
+	int len = 0;
+
+	while (*(p++))
+		len++;
+
+	return len;
+}
+
+
+struct ts_filter_chain {
+	/* All of the filters. */
+	struct ts_filter **arr;
+	/* Filters that can propagate values in the chain. */
+	struct ts_filter **pchain;
+	/* Length of the pchain array. */
+	int pchain_len;
+	/* FIXME: Add a spinlock and use it. */
+};
+
+struct ts_filter_chain *ts_filter_chain_create(
+	struct platform_device *pdev,
+	const struct ts_filter_chain_configuration conf[],
+	int count_coords)
+{
+	struct ts_filter_chain *c;
+	int count = 0;
+	int len;
+
+	BUG_ON((count_coords < 1));
+	BUG_ON(count_coords > MAX_TS_FILTER_COORDS);
+
+	c = kzalloc(sizeof(struct ts_filter_chain), GFP_KERNEL);
+	if (!c)
+		goto create_err_1;
+
+	len = (sptrlen(conf) + 1);
+	/* Memory for two null-terminated arrays of filters. */
+	c->arr = kzalloc(2 * sizeof(struct ts_filter *) * len, GFP_KERNEL);
+	if (!c->arr)
+		goto create_err_1;
+	c->pchain = c->arr + len;
+
+	while (conf->api) {
+		/* TODO: Can we get away with only sending pdev->dev? */
+		struct ts_filter *f =
+			(conf->api->create)(pdev, conf->config, count_coords);
+		if (!f) {
+			dev_info(&pdev->dev, "Filter %d creation failed\n",
+				 count);
+			goto create_err_2;
+		}
+
+		f->api = conf->api;
+		c->arr[count++] = f;
+
+		if (f->api->haspoint && f->api->getpoint && f->api->process)
+			c->pchain[c->pchain_len++] = f;
+
+		conf++;
+	}
+
+	dev_info(&pdev->dev, "%d filter(s) initialized\n", count);
+
+	return c;
+
+create_err_2:
+	ts_filter_chain_destroy(c); /* Also frees c. */
+create_err_1:
+	dev_info(&pdev->dev, "Error in filter chain initialization\n");
+	/*
+	 * FIXME: Individual filters have to return errors this way.
+	 * We only have to forward the errors we find.
+	 */
+	return ERR_PTR(-ENOMEM);
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_create);
+
+void ts_filter_chain_destroy(struct ts_filter_chain *c)
+{
+	if (c->arr) {
+		struct ts_filter **a = c->arr;
+		while (*a) {
+			((*a)->api->destroy)(*a);
+			a++;
+		}
+		kfree(c->arr);
+	}
+	kfree(c);
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_destroy);
+
+void ts_filter_chain_clear(struct ts_filter_chain *c)
+{
+	struct ts_filter **a = c->arr;
+
+	while (*a) {
+		if ((*a)->api->clear)
+			((*a)->api->clear)(*a);
+		a++;
+	}
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_clear);
+
+static void ts_filter_chain_scale(struct ts_filter_chain *c, int *coords)
+{
+	struct ts_filter **a = c->arr;
+	while (*a) {
+		if ((*a)->api->scale)
+			((*a)->api->scale)(*a, coords);
+		a++;
+	}
+}
+
+int ts_filter_chain_feed(struct ts_filter_chain *c, int *coords)
+{
+	int len = c->pchain_len;
+	int i = len - 1;
+
+	if (!c->pchain[0])
+		return 1; /* Nothing to do. */
+
+	BUG_ON(c->pchain[0]->api->haspoint(c->pchain[0]));
+
+	if (c->pchain[0]->api->process(c->pchain[0], coords))
+		return -1;
+
+	while (i >= 0 && i < len) {
+		if (c->pchain[i]->api->haspoint(c->pchain[i])) {
+			c->pchain[i]->api->getpoint(c->pchain[i], coords);
+			if (++i < len &&
+			    c->pchain[i]->api->process(c->pchain[i], coords))
+				return -1; /* Error. */
+		} else {
+			i--;
+		}
+	}
+
+	if (i >= 0) {	/* Same as i == len. */
+		ts_filter_chain_scale(c, coords);
+		return 1;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_feed);
+
diff --git a/drivers/input/touchscreen/ts_filter_group.c b/drivers/input/touchscreen/ts_filter_group.c
new file mode 100644
index 00000000000..9e344c5f19f
--- /dev/null
+++ b/drivers/input/touchscreen/ts_filter_group.c
@@ -0,0 +1,330 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ * All rights reserved.
+ *
+ *
+ * This filter is useful to reject samples that are not reliable. We consider
+ * that a sample is not reliable if it deviates form the Majority.
+ * This filter mixes information from all the available dimensions. It means
+ * that for two dimensions we draw a rectangle where the thought-to-be good
+ * points can be found.
+ *
+ * The implementation would be more efficient with a double-linked list but
+ * let's keep it simple for now.
+ *
+ * 1) We collect S samples and keep it in sorted sets.
+ *  - Points that are "close enough" are considered to be in the same set.
+ *    We don't actually keep the sets but ranges of points.
+ *
+ * 2) For each dimension:
+ *  - We choose the range with more elements. If more than "threshold"
+ *    points are in this range we use the minimum and the maximum point
+ *    of the range to define the valid range for this dimension [min, max],
+ *    otherwise we discard all the points and the ranges and go to step 1.
+ *
+ * 3) We consider the unsorted S samples and try to feed them to the next
+ *    filter in the chain. If one of the points of each sample
+ *    is not in the allowed range for its dimension we discard the sample.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input/touchscreen/ts_filter_group.h>
+
+struct coord_range {
+	int min;	/* Minimum value of the range. */
+	int max;	/* Maximum value of the range  */
+	int N;		/* Number of points in the range. */
+};
+
+struct ts_filter_group {
+	/* Private filter configuration. */
+	struct ts_filter_group_configuration *config;
+	/* Filter API. */
+	struct ts_filter tsf;
+
+	int N;			/* How many samples we have. */
+	int *samples[MAX_TS_FILTER_COORDS];	/* The samples: our input. */
+
+	/* Temporal values that help us compute range_min and range_max. */
+	struct coord_range *ranges[MAX_TS_FILTER_COORDS];	/* Ranges. */
+	int n_ranges[MAX_TS_FILTER_COORDS];		/* Number of ranges */
+
+	/* Computed ranges that help us filter the points. */
+	int range_max[MAX_TS_FILTER_COORDS];	/* Max. computed ranges. */
+	int range_min[MAX_TS_FILTER_COORDS];	/* Min. computed ranges. */
+
+	int tries_left;		/* We finish if we can't get enough samples. */
+	int ready;		/* If we are ready to deliver samples. */
+	int result;		/* Index of the point being returned. */
+};
+
+#define ts_filter_to_filter_group(f) \
+	container_of(f, struct ts_filter_group, tsf)
+
+
+static void ts_filter_group_clear_internal(struct ts_filter_group *tsfg,
+					   int attempts)
+{
+	int n;
+	tsfg->N = 0;
+	tsfg->tries_left = attempts;
+	tsfg->ready = 0;
+	tsfg->result = 0;
+	for (n = 0; n < tsfg->tsf.count_coords; n++)
+		tsfg->n_ranges[n] = 0;
+}
+
+static void ts_filter_group_clear(struct ts_filter *tsf)
+{
+	struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+
+	ts_filter_group_clear_internal(tsfg, tsfg->config->attempts);
+}
+
+static struct ts_filter *ts_filter_group_create(
+	struct platform_device *pdev,
+	const struct ts_filter_configuration *conf,
+	int count_coords)
+{
+	struct ts_filter_group *tsfg;
+	int i;
+
+	tsfg = kzalloc(sizeof(struct ts_filter_group), GFP_KERNEL);
+	if (!tsfg)
+		return NULL;
+
+	tsfg->config = container_of(conf,
+				    struct ts_filter_group_configuration,
+				    config);
+	tsfg->tsf.count_coords = count_coords;
+
+	BUG_ON(tsfg->config->attempts <= 0);
+	BUG_ON(tsfg->config->length < tsfg->config->threshold);
+
+	tsfg->samples[0] = kmalloc(count_coords * sizeof(int) *
+				   tsfg->config->length, GFP_KERNEL);
+	if (!tsfg->samples[0]) {
+		kfree(tsfg);
+		return NULL;
+	}
+	for (i = 1; i < count_coords; ++i)
+		tsfg->samples[i] = tsfg->samples[0] + i * tsfg->config->length;
+
+	tsfg->ranges[0] = kmalloc(count_coords * sizeof(struct coord_range) *
+				  tsfg->config->length, GFP_KERNEL);
+	if (!tsfg->ranges[0]) {
+		kfree(tsfg->samples[0]);
+		kfree(tsfg);
+		return NULL;
+	}
+	for (i = 1; i < count_coords; ++i)
+		tsfg->ranges[i] = tsfg->ranges[0] + i * tsfg->config->length;
+
+	ts_filter_group_clear_internal(tsfg, tsfg->config->attempts);
+
+	dev_info(&pdev->dev, "Created Group filter len:%d coords:%d close:%d "
+		 "thresh:%d\n", tsfg->config->length, count_coords,
+		 tsfg->config->close_enough, tsfg->config->threshold);
+
+	return &tsfg->tsf;
+}
+
+static void ts_filter_group_destroy(struct ts_filter *tsf)
+{
+	struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+
+	kfree(tsfg->samples[0]);
+	kfree(tsfg->ranges[0]);
+	kfree(tsf);
+}
+
+static void ts_filter_group_prepare_next(struct ts_filter *tsf);
+
+#define MIN(a, b) ((a) < (b) ? (a) : (b))
+#define MAX(a, b) ((a) > (b) ? (a) : (b))
+#define IN_RANGE(c, r) ((c) >= (r).min - tsfg->config->close_enough && \
+			(c) <= (r).max + tsfg->config->close_enough)
+
+static void delete_spot(struct coord_range *v, int n, int size)
+{
+	int i;
+	for (i = n; i < size - 1; ++i)
+		v[i] = v[i + 1];
+}
+
+static int ts_filter_group_process(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+	int n;
+	int j;
+
+	BUG_ON(tsfg->N >= tsfg->config->length);
+	BUG_ON(tsfg->ready);
+
+	for (n = 0; n < tsfg->tsf.count_coords; n++) {
+		int i;
+		struct coord_range *range = tsfg->ranges[n];
+		int *n_ranges = &tsfg->n_ranges[n];
+		int found = 0;
+
+		tsfg->samples[n][tsfg->N] = coords[n];
+
+		for (i = 0; i < *n_ranges; ++i) {
+			if (IN_RANGE(coords[n], range[i])) {
+				range[i].min  = MIN(range[i].min, coords[n]);
+				range[i].max  = MAX(range[i].max, coords[n]);
+				range[i].N++;
+				found = 1;
+				break;
+			} else if (coords[n] <= range[i].min)
+				break;	/* We need to insert a range. */
+		}
+		if (found) { /* We might need to melt ranges. */
+			if (i && range[i - 1].max + tsfg->config->close_enough
+			    >= range[i].min) {
+				BUG_ON(range[i - 1].max >= range[i].max);
+				range[i - 1].max = range[i].max;
+				range[i - 1].N += range[i].N;
+				delete_spot(range, i, *n_ranges);
+				(*n_ranges)--;
+				i--;
+			}
+			if (i < *n_ranges - 1 && range[i + 1].min -
+			    tsfg->config->close_enough <= range[i].max) {
+				range[i].max = range[i + 1].max;
+				range[i].N += range[i + 1].N;
+				delete_spot(range, i + 1, *n_ranges);
+				(*n_ranges)--;
+			}
+		} else {
+			BUG_ON((*n_ranges) >= tsfg->config->length);
+			(*n_ranges)++;
+			for (j = *n_ranges - 1; j > i; --j)
+				range[j] = range[j - 1];
+			range[i].N = 1;
+			range[i].min = coords[n];
+			range[i].max = coords[n];
+		}
+	}
+
+	if (++tsfg->N < tsfg->config->length)
+		return 0;
+
+	for (n = 0; n < tsfg->tsf.count_coords; ++n) {
+		int best = 0;
+		for (j = 1; j < tsfg->n_ranges[n]; ++j)
+			if (tsfg->ranges[n][best].N  < tsfg->ranges[n][j].N)
+				best = j;
+		if (tsfg->ranges[n][best].N < tsfg->config->threshold) {
+			/* This set of points is not good enough for us. */
+			if (--tsfg->tries_left) {
+				ts_filter_group_clear_internal
+					(tsfg, tsfg->tries_left);
+				/* No errors but we need more samples. */
+				return 0;
+			}
+			return 1; /* We give up: error. */
+		}
+		tsfg->range_min[n] = tsfg->ranges[n][best].min;
+		tsfg->range_max[n] = tsfg->ranges[n][best].max;
+	}
+
+	ts_filter_group_prepare_next(tsf);
+
+	return 0;
+}
+
+/*
+ * This private function prepares a point that will be returned
+ * in ts_filter_group_getpoint if it is available. It updates
+ * the priv->ready state also.
+ */
+static void ts_filter_group_prepare_next(struct ts_filter *tsf)
+{
+	struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+	int n;
+
+	while (priv->result < priv->N) {
+		for (n = 0; n < priv->tsf.count_coords; ++n) {
+			if (priv->samples[n][priv->result] <
+			    priv->range_min[n] ||
+			    priv->samples[n][priv->result] > priv->range_max[n])
+				break;
+		}
+
+		if (n == priv->tsf.count_coords) /* Sample is OK. */
+			break;
+
+		priv->result++;
+	}
+
+	if (unlikely(priv->result >= priv->N)) { /* No sample to deliver. */
+		ts_filter_group_clear_internal(priv, priv->config->attempts);
+		priv->ready = 0;
+	} else {
+		priv->ready = 1;
+	}
+}
+
+static int ts_filter_group_haspoint(struct ts_filter *tsf)
+{
+	struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+
+	return priv->ready;
+}
+
+static void ts_filter_group_getpoint(struct ts_filter *tsf, int *point)
+{
+	struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+	int n;
+
+	BUG_ON(!priv->ready);
+
+	for (n = 0; n < priv->tsf.count_coords; n++)
+		point[n] = priv->samples[n][priv->result];
+
+	priv->result++;
+
+	/* This call will update priv->ready. */
+	ts_filter_group_prepare_next(tsf);
+}
+
+/*
+ * Get ready to process the next batch of points, forget
+ * points we could have delivered.
+ */
+static void ts_filter_group_scale(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+
+	ts_filter_group_clear_internal(priv, priv->config->attempts);
+}
+
+const struct ts_filter_api ts_filter_group_api = {
+	.create =	ts_filter_group_create,
+	.destroy =	ts_filter_group_destroy,
+	.clear =	ts_filter_group_clear,
+	.process =	ts_filter_group_process,
+	.haspoint =	ts_filter_group_haspoint,
+	.getpoint =	ts_filter_group_getpoint,
+	.scale =	ts_filter_group_scale,
+};
+EXPORT_SYMBOL_GPL(ts_filter_group_api);
+
diff --git a/drivers/input/touchscreen/ts_filter_linear.c b/drivers/input/touchscreen/ts_filter_linear.c
new file mode 100644
index 00000000000..8b496591eec
--- /dev/null
+++ b/drivers/input/touchscreen/ts_filter_linear.c
@@ -0,0 +1,212 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ * All rights reserved.
+ *
+ * Linearly scale touchscreen values.
+ *
+ * Expose the TS_FILTER_LINEAR_NCONSTANTS for the linear transformation
+ * using sysfs.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <linux/input/touchscreen/ts_filter_linear.h>
+
+struct ts_filter_linear;
+
+/* Sysfs code. */
+
+struct const_obj {
+	/* The actual private object. */
+	struct ts_filter_linear *tsfl;
+	/* Our kobject. */
+	struct kobject kobj;
+};
+
+#define to_const_obj(x) container_of(x, struct const_obj, kobj)
+
+struct const_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct const_obj *const, struct const_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct const_obj *const, struct const_attribute *attr,
+			 const char *buf, size_t count);
+};
+
+#define to_const_attr(x) container_of(x, struct const_attribute, attr)
+
+
+/* Private linear filter structure. */
+
+struct ts_filter_linear {
+	/* Private configuration for this filter. */
+	struct ts_filter_linear_configuration *config;
+
+	/* Generic filter API. */
+	struct ts_filter tsf;
+
+	/* Linear constants for the transformation. */
+	int constants[TS_FILTER_LINEAR_NCONSTANTS];
+
+	/* Sysfs. */
+
+	/* Our const_object. */
+	struct const_obj c_obj;
+	/* Our type. We will stick operations to it. */
+	struct kobj_type const_ktype;
+	/* Attrs. of the virtual files. */
+	struct const_attribute kattrs[TS_FILTER_LINEAR_NCONSTANTS];
+	/* Default Attrs. Always NULL for us. */
+	struct attribute *attrs[TS_FILTER_LINEAR_NCONSTANTS + 1];
+	/* Storage for the name of the virtual files. */
+	char attr_names[TS_FILTER_LINEAR_NCONSTANTS][2];
+};
+
+#define ts_filter_to_filter_linear(f) \
+	container_of(f, struct ts_filter_linear, tsf)
+
+/* Sysfs functions. */
+
+static ssize_t const_attr_show(struct kobject *kobj,
+			       struct attribute *attr,
+			       char *buf)
+{
+	struct const_attribute *a = to_const_attr(attr);
+
+	return a->show(to_const_obj(kobj), a, buf);
+}
+
+static ssize_t const_attr_store(struct kobject *kobj,
+				struct attribute *attr,
+				const char *buf, size_t len)
+{
+	struct const_attribute *a = to_const_attr(attr);
+
+	return a->store(to_const_obj(kobj), a, buf, len);
+}
+
+static struct sysfs_ops const_sysfs_ops = {
+	.show =		const_attr_show,
+	.store =	const_attr_store,
+};
+
+static void const_release(struct kobject *kobj)
+{
+	kfree(to_const_obj(kobj)->tsfl);
+}
+
+static ssize_t const_show(struct const_obj *obj, struct const_attribute *attr,
+			  char *buf)
+{
+	int who;
+
+	sscanf(attr->attr.name, "%d", &who);
+	return sprintf(buf, "%d\n", obj->tsfl->constants[who]);
+}
+
+static ssize_t const_store(struct const_obj *obj, struct const_attribute *attr,
+			   const char *buf, size_t count)
+{
+	int who;
+
+	sscanf(attr->attr.name, "%d", &who);
+	sscanf(buf, "%d", &obj->tsfl->constants[who]);
+	return count;
+}
+
+/* Filter functions. */
+
+static struct ts_filter *ts_filter_linear_create(
+	struct platform_device *pdev,
+	const struct ts_filter_configuration *conf,
+	int count_coords)
+{
+	struct ts_filter_linear *tsfl;
+	int i;
+	int ret;
+
+	tsfl = kzalloc(sizeof(struct ts_filter_linear), GFP_KERNEL);
+	if (!tsfl)
+		return NULL;
+
+	tsfl->config = container_of(conf,
+				    struct ts_filter_linear_configuration,
+				    config);
+
+	tsfl->tsf.count_coords = count_coords;
+
+	for (i = 0; i < TS_FILTER_LINEAR_NCONSTANTS; ++i) {
+		tsfl->constants[i] = tsfl->config->constants[i];
+
+		/* sysfs */
+		sprintf(tsfl->attr_names[i], "%d", i);
+		tsfl->kattrs[i].attr.name = tsfl->attr_names[i];
+		tsfl->kattrs[i].attr.mode = 0666;
+		tsfl->kattrs[i].show = const_show;
+		tsfl->kattrs[i].store = const_store;
+		tsfl->attrs[i] = &tsfl->kattrs[i].attr;
+	}
+	tsfl->attrs[i] = NULL;
+
+	tsfl->const_ktype.sysfs_ops = &const_sysfs_ops;
+	tsfl->const_ktype.release = const_release;
+	tsfl->const_ktype.default_attrs = tsfl->attrs;
+	tsfl->c_obj.tsfl = tsfl; /* kernel frees tsfl in const_release */
+
+	ret = kobject_init_and_add(&tsfl->c_obj.kobj, &tsfl->const_ktype,
+				   &pdev->dev.kobj, "calibration");
+	if (ret) {
+		kobject_put(&tsfl->c_obj.kobj);
+		return NULL;
+	}
+
+	dev_info(&pdev->dev, "Created Linear filter coords:%d\n", count_coords);
+
+	return &tsfl->tsf;
+}
+
+static void ts_filter_linear_destroy(struct ts_filter *tsf)
+{
+	struct ts_filter_linear *tsfl = ts_filter_to_filter_linear(tsf);
+
+	/* Kernel frees tsfl in const_release. */
+	kobject_put(&tsfl->c_obj.kobj);
+}
+
+static void ts_filter_linear_scale(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_linear *tsfl = ts_filter_to_filter_linear(tsf);
+
+	int *k = tsfl->constants;
+	int c0 = coords[tsfl->config->coord0];
+	int c1 = coords[tsfl->config->coord1];
+
+	coords[tsfl->config->coord0] = (k[2] + k[0] * c0 + k[1] * c1) / k[6];
+	coords[tsfl->config->coord1] = (k[5] + k[3] * c0 + k[4] * c1) / k[6];
+}
+
+const struct ts_filter_api ts_filter_linear_api = {
+	.create =	ts_filter_linear_create,
+	.destroy =	ts_filter_linear_destroy,
+	.scale =	ts_filter_linear_scale,
+};
+EXPORT_SYMBOL_GPL(ts_filter_linear_api);
+
diff --git a/drivers/input/touchscreen/ts_filter_mean.c b/drivers/input/touchscreen/ts_filter_mean.c
new file mode 100644
index 00000000000..ad4e9c1207c
--- /dev/null
+++ b/drivers/input/touchscreen/ts_filter_mean.c
@@ -0,0 +1,174 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008,2009
+ *       Andy Green <andy@warmcat.com>
+ *       Nelson Castillo <arhuaco@freaks-unidos.net>
+ *
+ * Simple mean filter.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#include <linux/input/touchscreen/ts_filter_mean.h>
+
+struct ts_filter_mean {
+	/* Copy of the private filter configuration. */
+	struct ts_filter_mean_configuration *config;
+	/* Filter API. */
+	struct ts_filter tsf;
+
+	/* Index on a circular buffer. */
+	int curr;
+	/* Useful to tell if the circular buffer is full(read:ready). */
+	int count;
+	/* Sumation used to compute the mean. */
+	int sum[MAX_TS_FILTER_COORDS];
+	/* Keep point values and decrement them from the sum on time. */
+	int *fifo[MAX_TS_FILTER_COORDS];
+	/* Store the output of this filter. */
+	int ready;
+};
+
+#define ts_filter_to_filter_mean(f) container_of(f, struct ts_filter_mean, tsf)
+
+
+static void ts_filter_mean_clear(struct ts_filter *tsf);
+
+static struct ts_filter *ts_filter_mean_create(
+	struct platform_device *pdev,
+	const struct ts_filter_configuration *conf,
+	int count_coords)
+{
+	struct ts_filter_mean *priv;
+	int *v;
+	int n;
+
+	priv = kzalloc(sizeof(struct ts_filter_mean), GFP_KERNEL);
+	if (!priv)
+		return NULL;
+
+	priv->tsf.count_coords = count_coords;
+	priv->config = container_of(conf,
+				    struct ts_filter_mean_configuration,
+				    config);
+
+	BUG_ON(priv->config->length <= 0);
+
+	v = kmalloc(priv->config->length * sizeof(int) * count_coords,
+		    GFP_KERNEL);
+	if (!v)
+		return NULL;
+
+	for (n = 0; n < count_coords; n++) {
+		priv->fifo[n] = v;
+		v += priv->config->length;
+	}
+
+	ts_filter_mean_clear(&priv->tsf);
+
+	dev_info(&pdev->dev, "Created Mean filter len:%d coords:%d\n",
+		 priv->config->length, count_coords);
+
+	return &priv->tsf;
+}
+
+static void ts_filter_mean_destroy(struct ts_filter *tsf)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+	kfree(priv->fifo[0]); /* first guy has pointer from kmalloc */
+	kfree(tsf);
+}
+
+static void ts_filter_mean_clear(struct ts_filter *tsf)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+	priv->count = 0;
+	priv->curr = 0;
+	priv->ready = 0;
+	memset(priv->sum, 0, tsf->count_coords * sizeof(int));
+}
+
+static int ts_filter_mean_process(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+	int n;
+
+	BUG_ON(priv->ready);
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		priv->sum[n] += coords[n];
+		priv->fifo[n][priv->curr] = coords[n];
+	}
+
+	if (priv->count + 1 == priv->config->length)
+		priv->ready = 1;
+	else
+		priv->count++;
+
+	priv->curr = (priv->curr + 1) % priv->config->length;
+
+	return 0; /* No error. */
+}
+
+static int ts_filter_mean_haspoint(struct ts_filter *tsf)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+	return priv->ready;
+}
+
+static void ts_filter_mean_getpoint(struct ts_filter *tsf, int *point)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+	int n;
+
+	BUG_ON(!priv->ready);
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		point[n] = priv->sum[n];
+		priv->sum[n] -= priv->fifo[n][priv->curr];
+	}
+
+	priv->ready = 0;
+}
+
+static void ts_filter_mean_scale(struct ts_filter *tsf, int *coords)
+{
+	int n;
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		coords[n] += priv->config->length >> 1; /* Rounding. */
+		coords[n] /= priv->config->length;
+	}
+}
+
+const struct ts_filter_api ts_filter_mean_api = {
+	.create =	ts_filter_mean_create,
+	.destroy =	ts_filter_mean_destroy,
+	.clear =	ts_filter_mean_clear,
+	.process =	ts_filter_mean_process,
+	.scale =	ts_filter_mean_scale,
+	.haspoint =	ts_filter_mean_haspoint,
+	.getpoint =	ts_filter_mean_getpoint,
+};
+EXPORT_SYMBOL_GPL(ts_filter_mean_api);
+
diff --git a/drivers/input/touchscreen/ts_filter_median.c b/drivers/input/touchscreen/ts_filter_median.c
new file mode 100644
index 00000000000..c608f7a9794
--- /dev/null
+++ b/drivers/input/touchscreen/ts_filter_median.c
@@ -0,0 +1,261 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008 Andy Green <andy@warmcat.com>
+ *
+ *
+ * Median averaging stuff.  We sort incoming raw samples into an array of
+ * MEDIAN_SIZE length, discarding the oldest sample each time once we are full.
+ * We then return the sum of the middle three samples for X and Y.  It means
+ * the final result must be divided by (3 * scaling factor) to correct for
+ * avoiding the repeated /3.
+ *
+ * This strongly rejects brief excursions away from a central point that is
+ * sticky in time compared to the excursion duration.
+ *
+ * Thanks to Dale Schumacher (who wrote some example code) and Carl-Daniel
+ * Halifinger who pointed out this would be a good method.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input/touchscreen/ts_filter_median.h>
+
+struct ts_filter_median {
+	/* Private configuration. */
+	struct ts_filter_median_configuration *config;
+	/* Generic Filter API. */
+	struct ts_filter tsf;
+
+	/* Count raw samples we get. */
+	int samples_count;
+	/*
+	 * Remember the last coordinates we got in order to know if
+	 * we are moving slow or fast.
+	 */
+	int last_issued[MAX_TS_FILTER_COORDS];
+	/* How many samples in the sort buffer are valid. */
+	int valid;
+	/* Samples taken for median in sorted form. */
+	int *sort[MAX_TS_FILTER_COORDS];
+	/* Samples taken for median. */
+	int *fifo[MAX_TS_FILTER_COORDS];
+	/* Where we are in the fifo sample memory. */
+	int pos;
+	/* Do we have a sample to deliver? */
+	int ready;
+};
+
+#define ts_filter_to_filter_median(f) \
+	container_of(f, struct ts_filter_median, tsf)
+
+
+static void ts_filter_median_insert(int *p, int sample, int count)
+{
+	int n;
+
+	/* Search through what we got so far to find where to put sample. */
+	for (n = 0; n < count; n++)
+		if (sample < p[n]) {	/* We met somebody bigger than us? */
+			/* Starting from the end, push bigger guys down one. */
+			for (count--; count >= n; count--)
+				p[count + 1] = p[count];
+			p[n] = sample; /* Put us in place of first bigger. */
+			return;
+		}
+
+	p[count] = sample; /* Nobody was bigger than us, add us on the end. */
+}
+
+static void ts_filter_median_del(int *p, int value, int count)
+{
+	int index;
+
+	for (index = 0; index < count; index++)
+		if (p[index] == value) {
+			for (; index < count; index++)
+				p[index] = p[index + 1];
+			return;
+		}
+}
+
+
+static void ts_filter_median_clear(struct ts_filter *tsf)
+{
+	struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+
+	tsfm->pos = 0;
+	tsfm->valid = 0;
+	tsfm->ready = 0;
+	memset(&tsfm->last_issued[0], 1, tsf->count_coords * sizeof(int));
+}
+
+static struct ts_filter *ts_filter_median_create(
+	struct platform_device *pdev,
+	const struct ts_filter_configuration *conf,
+	int count_coords)
+{
+	int *p;
+	int n;
+	struct ts_filter_median *tsfm = kzalloc(sizeof(struct ts_filter_median),
+								    GFP_KERNEL);
+
+	if (!tsfm)
+		return NULL;
+
+	tsfm->config = container_of(conf,
+				    struct ts_filter_median_configuration,
+				    config);
+
+	tsfm->tsf.count_coords = count_coords;
+
+	tsfm->config->midpoint = (tsfm->config->extent >> 1) + 1;
+
+	p = kmalloc(2 * count_coords * sizeof(int) * (tsfm->config->extent + 1),
+		    GFP_KERNEL);
+	if (!p) {
+		kfree(tsfm);
+		return NULL;
+	}
+
+	for (n = 0; n < count_coords; n++) {
+		tsfm->sort[n] = p;
+		p += tsfm->config->extent + 1;
+		tsfm->fifo[n] = p;
+		p += tsfm->config->extent + 1;
+	}
+
+	ts_filter_median_clear(&tsfm->tsf);
+
+	dev_info(&pdev->dev,
+		 "Created Median filter len:%d coords:%d dec_threshold:%d\n",
+		 tsfm->config->extent, count_coords,
+		 tsfm->config->decimation_threshold);
+
+	return &tsfm->tsf;
+}
+
+static void ts_filter_median_destroy(struct ts_filter *tsf)
+{
+	struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+
+	kfree(tsfm->sort[0]); /* First guy has pointer from kmalloc. */
+	kfree(tsf);
+}
+
+static void ts_filter_median_scale(struct ts_filter *tsf, int *coords)
+{
+	int n;
+
+	for (n = 0; n < tsf->count_coords; n++)
+		coords[n] = (coords[n] + 2) / 3;
+}
+
+/*
+ * Give us the raw sample data coords, and if we return 1 then you can
+ * get a filtered coordinate from coords. If we return 0 you didn't
+ * fill all the filters with samples yet.
+ */
+
+static int ts_filter_median_process(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+	int n;
+	int movement = 1;
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		/* Grab copy in insertion order to remove when oldest. */
+		tsfm->fifo[n][tsfm->pos] = coords[n];
+		/* Insert these samples in sorted order in the median arrays. */
+		ts_filter_median_insert(tsfm->sort[n], coords[n], tsfm->valid);
+	}
+	/* Move us on in the fifo. */
+	if (++tsfm->pos == (tsfm->config->extent + 1))
+		tsfm->pos = 0;
+
+	/* Have we finished a median sampling? */
+	if (++tsfm->valid < tsfm->config->extent)
+		goto process_exit; /* No valid sample to use. */
+
+	BUG_ON(tsfm->valid != tsfm->config->extent);
+
+	tsfm->valid--;
+
+	/*
+	 * Sum the middle 3 in the median sorted arrays. We don't divide back
+	 * down which increases the sum resolution by a factor of 3 until the
+	 * scale API function is called.
+	 */
+	for (n = 0; n < tsf->count_coords; n++)
+		/* Perform the deletion of the oldest sample. */
+		ts_filter_median_del(tsfm->sort[n], tsfm->fifo[n][tsfm->pos],
+				     tsfm->valid);
+
+	tsfm->samples_count--;
+	if (tsfm->samples_count >= 0)
+		goto process_exit;
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		/* Give the coordinate result from summing median 3. */
+		coords[n] = tsfm->sort[n][tsfm->config->midpoint - 1] +
+			    tsfm->sort[n][tsfm->config->midpoint] +
+			    tsfm->sort[n][tsfm->config->midpoint + 1];
+
+		movement += abs(tsfm->last_issued[n] - coords[n]);
+	}
+
+	if (movement > tsfm->config->decimation_threshold) /* Moving fast. */
+		tsfm->samples_count = tsfm->config->decimation_above;
+	else
+		tsfm->samples_count = tsfm->config->decimation_below;
+
+	memcpy(&tsfm->last_issued[0], coords, tsf->count_coords * sizeof(int));
+
+	tsfm->ready = 1;
+
+process_exit:
+	return 0;
+}
+
+static int ts_filter_median_haspoint(struct ts_filter *tsf)
+{
+	struct ts_filter_median *priv = ts_filter_to_filter_median(tsf);
+
+	return priv->ready;
+}
+
+static void ts_filter_median_getpoint(struct ts_filter *tsf, int *point)
+{
+	struct ts_filter_median *priv = ts_filter_to_filter_median(tsf);
+
+	BUG_ON(!priv->ready);
+
+	memcpy(point, &priv->last_issued[0], tsf->count_coords * sizeof(int));
+
+	priv->ready = 0;
+}
+
+const struct ts_filter_api ts_filter_median_api = {
+	.create =	ts_filter_median_create,
+	.destroy =	ts_filter_median_destroy,
+	.clear =	ts_filter_median_clear,
+	.process =	ts_filter_median_process,
+	.scale =	ts_filter_median_scale,
+	.haspoint =	ts_filter_median_haspoint,
+	.getpoint =	ts_filter_median_getpoint,
+};
+EXPORT_SYMBOL_GPL(ts_filter_median_api);
+
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 6954f550010..3a7a58222f8 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -170,11 +170,11 @@ static void ucb1400_handle_pending_irq(struct ucb1400_ts *ucb)
 	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
 	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
 
-	if (isr & UCB_IE_TSPX) {
+	if (isr & UCB_IE_TSPX)
 		ucb1400_ts_irq_disable(ucb->ac97);
-		enable_irq(ucb->irq);
-	} else
-		printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr);
+	else
+		dev_dbg(&ucb->ts_idev->dev, "ucb1400: unexpected IE_STATUS = %#x\n", isr);
+	enable_irq(ucb->irq);
 }
 
 static int ucb1400_ts_thread(void *_ucb)
@@ -345,6 +345,7 @@ static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb)
 static int ucb1400_ts_probe(struct platform_device *dev)
 {
 	int error, x_res, y_res;
+	u16 fcsr;
 	struct ucb1400_ts *ucb = dev->dev.platform_data;
 
 	ucb->ts_idev = input_allocate_device();
@@ -382,6 +383,14 @@ static int ucb1400_ts_probe(struct platform_device *dev)
 	ucb->ts_idev->evbit[0]		= BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
 	ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 
+	/*
+	 * Enable ADC filter to prevent horrible jitter on Colibri.
+	 * This also further reduces jitter on boards where ADCSYNC
+	 * pin is connected.
+	 */
+	fcsr = ucb1400_reg_read(ucb->ac97, UCB_FCSR);
+	ucb1400_reg_write(ucb->ac97, UCB_FCSR, fcsr | UCB_FCSR_AVE);
+
 	ucb1400_adc_enable(ucb->ac97);
 	x_res = ucb1400_ts_read_xres(ucb);
 	y_res = ucb1400_ts_read_yres(ucb);
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index ec5169604a6..2d91049571a 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -294,32 +294,33 @@ struct reply_t gigaset_tab_cid[] =
 	{RSP_OK,      604,604, -1,                605, 5, {ACT_CMD+AT_MSN}},
 	{RSP_OK,      605,605, -1,                606, 5, {ACT_CMD+AT_ISO}},
 	{RSP_NULL,    605,605, -1,                606, 5, {ACT_CMD+AT_ISO}},
-	{RSP_OK,      606,606, -1,                607, 5, {0},             "+VLS=17\r"}, /* set "Endgeraetemodus" */
+	{RSP_OK,      606,606, -1,                607, 5, {0}, "+VLS=17\r"},
 	{RSP_OK,      607,607, -1,                608,-1},
-	//{RSP_ZSAU,    608,608,ZSAU_PROCEEDING,    608, 0, {ACT_ERROR}},//DELETE
 	{RSP_ZSAU,    608,608,ZSAU_PROCEEDING,    609, 5, {ACT_CMD+AT_DIAL}},
 	{RSP_OK,      609,609, -1,                650, 0, {ACT_DIALING}},
 
-	{RSP_ZVLS,    608,608, 17,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZCTP,    609,609, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZCPN,    609,609, -1,                 -1,-1, {ACT_DEBUG}},
 	{RSP_ERROR,   601,609, -1,                  0, 0, {ACT_ABORTDIAL}},
 	{EV_TIMEOUT,  601,609, -1,                  0, 0, {ACT_ABORTDIAL}},
 
-	/* dialing */
-	{RSP_ZCTP,    650,650, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZCPN,    650,650, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZSAU,    650,650,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}}, /* some devices don't send this */
-
-	/* connection established  */
-	{RSP_ZSAU,    650,650,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}}, //FIXME -> DLE1
-	{RSP_ZSAU,    750,750,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}}, //FIXME -> DLE1
-
-	{EV_BC_OPEN,  800,800, -1,                800,-1, {ACT_NOTIFY_BC_UP}}, //FIXME new constate + timeout
+	/* optional dialing responses */
+	{EV_BC_OPEN,  650,650, -1,                651,-1},
+	{RSP_ZVLS,    608,651, 17,                 -1,-1, {ACT_DEBUG}},
+	{RSP_ZCTP,    609,651, -1,                 -1,-1, {ACT_DEBUG}},
+	{RSP_ZCPN,    609,651, -1,                 -1,-1, {ACT_DEBUG}},
+	{RSP_ZSAU,    650,651,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}},
+
+	/* connect */
+	{RSP_ZSAU,    650,650,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}},
+	{RSP_ZSAU,    651,651,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT,
+							   ACT_NOTIFY_BC_UP}},
+	{RSP_ZSAU,    750,750,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}},
+	{RSP_ZSAU,    751,751,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT,
+							   ACT_NOTIFY_BC_UP}},
+	{EV_BC_OPEN,  800,800, -1,                800,-1, {ACT_NOTIFY_BC_UP}},
 
 	/* remote hangup */
-	{RSP_ZSAU,    650,650,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEREJECT}},
-	{RSP_ZSAU,    750,750,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEHUP}},
+	{RSP_ZSAU,    650,651,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEREJECT}},
+	{RSP_ZSAU,    750,751,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEHUP}},
 	{RSP_ZSAU,    800,800,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEHUP}},
 
 	/* hangup */
@@ -358,7 +359,8 @@ struct reply_t gigaset_tab_cid[] =
 	{RSP_ZSAU,    700,729,ZSAU_ACTIVE,          0, 0, {ACT_ABORTACCEPT}},
 	{RSP_ZSAU,    700,729,ZSAU_DISCONNECT_IND,  0, 0, {ACT_ABORTACCEPT}},
 
-	{EV_TIMEOUT,  750,750, -1,                  0, 0, {ACT_CONNTIMEOUT}},
+	{EV_BC_OPEN,  750,750, -1,                751,-1},
+	{EV_TIMEOUT,  750,751, -1,                  0, 0, {ACT_CONNTIMEOUT}},
 
 	/* B channel closed (general case) */
 	{EV_BC_CLOSED, -1, -1, -1,                 -1,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME
@@ -876,12 +878,6 @@ static void bchannel_down(struct bc_state *bcs)
 
 static void bchannel_up(struct bc_state *bcs)
 {
-	if (!(bcs->chstate & CHS_D_UP)) {
-		dev_notice(bcs->cs->dev, "%s: D channel not up\n", __func__);
-		bcs->chstate |= CHS_D_UP;
-		gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN);
-	}
-
 	if (bcs->chstate & CHS_B_UP) {
 		dev_notice(bcs->cs->dev, "%s: B channel already up\n",
 			   __func__);
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index 1ebfcab7466..8ff7e35c706 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -408,6 +408,8 @@ static int if_write_room(struct tty_struct *tty)
 	return retval;
 }
 
+/* FIXME: This function does not have error returns */
+
 static int if_chars_in_buffer(struct tty_struct *tty)
 {
 	struct cardstate *cs;
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index db3a1e4cd48..bed38fcc432 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -174,12 +174,6 @@ int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size)
 		pr_err("invalid size %d\n", size);
 		return -EINVAL;
 	}
-	src = iwb->read;
-	if (unlikely(limit >= BAS_OUTBUFSIZE + BAS_OUTBUFPAD ||
-		     (read < src && limit >= src))) {
-		pr_err("isoc write buffer frame reservation violated\n");
-		return -EFAULT;
-	}
 #endif
 
 	if (read < write) {
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index 8df889b0c1a..9de54202c90 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -37,7 +37,6 @@
 #include <linux/kernel_stat.h>
 #include <linux/usb.h>
 #include <linux/kernel.h>
-#include <linux/smp_lock.h>
 #include <linux/sched.h>
 #include <linux/moduleparam.h>
 #include "hisax.h"
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index b4d4522e507..2881a66c1aa 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -13,6 +13,7 @@
 
 #include <linux/isdn.h>
 #include <linux/delay.h>
+#include <linux/smp_lock.h>
 #include "isdn_common.h"
 #include "isdn_tty.h"
 #ifdef CONFIG_ISDN_AUDIO
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index 990e6a7e667..7e5f30dbc0a 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -731,10 +731,10 @@ l1oip_socket_thread(void *data)
 	while (!signal_pending(current)) {
 		struct kvec iov = {
 			.iov_base = recvbuf,
-			.iov_len = sizeof(recvbuf),
+			.iov_len = recvbuf_size,
 		};
 		recvlen = kernel_recvmsg(socket, &msg, &iov, 1,
-					 sizeof(recvbuf), 0);
+					 recvbuf_size, 0);
 		if (recvlen > 0) {
 			l1oip_socket_parse(hc, &sin_rx, recvbuf, recvlen);
 		} else {
@@ -1480,7 +1480,7 @@ l1oip_init(void)
 		return -ENOMEM;
 
 	l1oip_cnt = 0;
-	while (type[l1oip_cnt] && l1oip_cnt < MAX_CARDS) {
+	while (l1oip_cnt < MAX_CARDS && type[l1oip_cnt]) {
 		switch (type[l1oip_cnt] & 0xff) {
 		case 1:
 			pri = 0;
diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c
index e2f45019ebf..3e1532a180f 100644
--- a/drivers/isdn/mISDN/stack.c
+++ b/drivers/isdn/mISDN/stack.c
@@ -17,6 +17,7 @@
 
 #include <linux/mISDNif.h>
 #include <linux/kthread.h>
+#include <linux/smp_lock.h>
 #include "core.h"
 
 static u_int	*debug;
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9b60b6b684d..4ec74ef5e0b 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -75,6 +75,7 @@ config LEDS_ALIX2
 	depends on LEDS_CLASS && X86 && EXPERIMENTAL
 	help
 	  This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
+	  You have to set leds-alix2.force=1 for boards with Award BIOS.
 
 config LEDS_H1940
 	tristate "LED Support for iPAQ H1940 device"
@@ -145,15 +146,16 @@ config LEDS_GPIO_OF
 	  of_platform devices.  For instance, LEDs which are listed in a "dts"
 	  file.
 
-config LEDS_LP5521
-	tristate "LED Support for the LP5521 LEDs"
+config LEDS_LP3944
+	tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
 	depends on LEDS_CLASS && I2C
 	help
-	  If you say 'Y' here you get support for the National Semiconductor
-	  LP5521 LED driver used in n8x0 boards.
+    This option enables support for LEDs connected to the National
+    Semiconductor LP3944 Lighting Management Unit (LMU) also known as
+    Fun Light Chip.
 
-	  This driver can be built as a module by choosing 'M'. The module
-	  will be called leds-lp5521.
+	  To compile this driver as a module, choose M here: the
+	  module will be called leds-lp3944.
 
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook"
@@ -227,6 +229,12 @@ config LEDS_BD2802
 	  This option enables support for BD2802GU RGB LED driver chips
 	  accessed via the I2C bus.
 
+config LEDS_GTA02_VIBRATOR
+	tristate "Vibrator Support for the Openmoko Freerunner GSM phone"
+	depends on LEDS_CLASS && MACH_NEO1973_GTA02
+ 	help
+	  This option enables support for the vibrator on the Openmoko Freerunner.
+
 comment "LED Triggers"
 
 config LEDS_TRIGGERS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2d41c4dcf92..edc24c2bebe 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-cobalt-raq.o
 obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
 obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
 obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
+obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
 obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
@@ -30,6 +31,7 @@ obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
+obj-$(CONFIG_LEDS_GTA02_VIBRATOR)	+= leds-gta02-vibrator.o
 
 # LED Triggers
 obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c
index ddbd7730dfc..731d4eef342 100644
--- a/drivers/leds/leds-alix2.c
+++ b/drivers/leds/leds-alix2.c
@@ -14,7 +14,7 @@
 
 static int force = 0;
 module_param(force, bool, 0444);
-MODULE_PARM_DESC(force, "Assume system has ALIX.2 style LEDs");
+MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs");
 
 struct alix_led {
 	struct led_classdev cdev;
@@ -155,6 +155,11 @@ static int __init alix_led_init(void)
 		goto out;
 	}
 
+	/* enable output on GPIO for LED 1,2,3 */
+	outl(1 << 6, 0x6104);
+	outl(1 << 9, 0x6184);
+	outl(1 << 11, 0x6184);
+
 	pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
 	if (!IS_ERR(pdev)) {
 		ret = platform_driver_probe(&alix_led_driver, alix_led_probe);
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 4149ecb3a9b..779d7f262c0 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -97,6 +97,10 @@ struct bd2802_led {
 	enum led_ids			led_id;
 	enum led_colors			color;
 	enum led_bits			state;
+
+	/* General attributes of RGB LEDs */
+	int				wave_pattern;
+	int				rgb_current;
 };
 
 
@@ -254,7 +258,7 @@ static void bd2802_set_on(struct bd2802_led *led, enum led_ids id,
 		bd2802_reset_cancel(led);
 
 	reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
-	bd2802_write_byte(led->client, reg, BD2802_CURRENT_032);
+	bd2802_write_byte(led->client, reg, led->rgb_current);
 	reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
 	bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
 	reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
@@ -275,9 +279,9 @@ static void bd2802_set_blink(struct bd2802_led *led, enum led_ids id,
 	reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
 	bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
 	reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
-	bd2802_write_byte(led->client, reg, BD2802_CURRENT_032);
+	bd2802_write_byte(led->client, reg, led->rgb_current);
 	reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
-	bd2802_write_byte(led->client, reg, BD2802_PATTERN_HALF);
+	bd2802_write_byte(led->client, reg, led->wave_pattern);
 
 	bd2802_enable(led, id);
 	bd2802_update_state(led, id, color, BD2802_BLINK);
@@ -406,7 +410,7 @@ static void bd2802_enable_adv_conf(struct bd2802_led *led)
 		ret = device_create_file(&led->client->dev,
 						bd2802_addr_attributes[i]);
 		if (ret) {
-			dev_err(&led->client->dev, "failed to sysfs file %s\n",
+			dev_err(&led->client->dev, "failed: sysfs file %s\n",
 					bd2802_addr_attributes[i]->attr.name);
 			goto failed_remove_files;
 		}
@@ -483,6 +487,52 @@ static struct device_attribute bd2802_adv_conf_attr = {
 	.store = bd2802_store_adv_conf,
 };
 
+#define BD2802_CONTROL_ATTR(attr_name, name_str)			\
+static ssize_t bd2802_show_##attr_name(struct device *dev,		\
+	struct device_attribute *attr, char *buf)			\
+{									\
+	struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+	ssize_t ret;							\
+	down_read(&led->rwsem);						\
+	ret = sprintf(buf, "0x%02x\n", led->attr_name);			\
+	up_read(&led->rwsem);						\
+	return ret;							\
+}									\
+static ssize_t bd2802_store_##attr_name(struct device *dev,		\
+	struct device_attribute *attr, const char *buf, size_t count)	\
+{									\
+	struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+	unsigned long val;						\
+	int ret;							\
+	if (!count)							\
+		return -EINVAL;						\
+	ret = strict_strtoul(buf, 16, &val);				\
+	if (ret)							\
+		return ret;						\
+	down_write(&led->rwsem);					\
+	led->attr_name = val;						\
+	up_write(&led->rwsem);						\
+	return count;							\
+}									\
+static struct device_attribute bd2802_##attr_name##_attr = {		\
+	.attr = {							\
+		.name = name_str,					\
+		.mode = 0644,						\
+		.owner = THIS_MODULE					\
+	},								\
+	.show = bd2802_show_##attr_name,				\
+	.store = bd2802_store_##attr_name,				\
+};
+
+BD2802_CONTROL_ATTR(wave_pattern, "wave_pattern");
+BD2802_CONTROL_ATTR(rgb_current, "rgb_current");
+
+static struct device_attribute *bd2802_attributes[] = {
+	&bd2802_adv_conf_attr,
+	&bd2802_wave_pattern_attr,
+	&bd2802_rgb_current_attr,
+};
+
 static void bd2802_led_work(struct work_struct *work)
 {
 	struct bd2802_led *led = container_of(work, struct bd2802_led, work);
@@ -538,7 +588,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led)
 	led->cdev_led1r.brightness = LED_OFF;
 	led->cdev_led1r.brightness_set = bd2802_set_led1r_brightness;
 	led->cdev_led1r.blink_set = bd2802_set_led1r_blink;
-	led->cdev_led1r.flags |= LED_CORE_SUSPENDRESUME;
 
 	ret = led_classdev_register(&led->client->dev, &led->cdev_led1r);
 	if (ret < 0) {
@@ -551,7 +600,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led)
 	led->cdev_led1g.brightness = LED_OFF;
 	led->cdev_led1g.brightness_set = bd2802_set_led1g_brightness;
 	led->cdev_led1g.blink_set = bd2802_set_led1g_blink;
-	led->cdev_led1g.flags |= LED_CORE_SUSPENDRESUME;
 
 	ret = led_classdev_register(&led->client->dev, &led->cdev_led1g);
 	if (ret < 0) {
@@ -564,7 +612,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led)
 	led->cdev_led1b.brightness = LED_OFF;
 	led->cdev_led1b.brightness_set = bd2802_set_led1b_brightness;
 	led->cdev_led1b.blink_set = bd2802_set_led1b_blink;
-	led->cdev_led1b.flags |= LED_CORE_SUSPENDRESUME;
 
 	ret = led_classdev_register(&led->client->dev, &led->cdev_led1b);
 	if (ret < 0) {
@@ -577,7 +624,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led)
 	led->cdev_led2r.brightness = LED_OFF;
 	led->cdev_led2r.brightness_set = bd2802_set_led2r_brightness;
 	led->cdev_led2r.blink_set = bd2802_set_led2r_blink;
-	led->cdev_led2r.flags |= LED_CORE_SUSPENDRESUME;
 
 	ret = led_classdev_register(&led->client->dev, &led->cdev_led2r);
 	if (ret < 0) {
@@ -590,7 +636,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led)
 	led->cdev_led2g.brightness = LED_OFF;
 	led->cdev_led2g.brightness_set = bd2802_set_led2g_brightness;
 	led->cdev_led2g.blink_set = bd2802_set_led2g_blink;
-	led->cdev_led2g.flags |= LED_CORE_SUSPENDRESUME;
 
 	ret = led_classdev_register(&led->client->dev, &led->cdev_led2g);
 	if (ret < 0) {
@@ -640,7 +685,7 @@ static int __devinit bd2802_probe(struct i2c_client *client,
 {
 	struct bd2802_led *led;
 	struct bd2802_led_platform_data *pdata;
-	int ret;
+	int ret, i;
 
 	led = kzalloc(sizeof(struct bd2802_led), GFP_KERNEL);
 	if (!led) {
@@ -670,13 +715,20 @@ static int __devinit bd2802_probe(struct i2c_client *client,
 	/* To save the power, reset BD2802 after detecting */
 	gpio_set_value(led->pdata->reset_gpio, 0);
 
+	/* Default attributes */
+	led->wave_pattern = BD2802_PATTERN_HALF;
+	led->rgb_current = BD2802_CURRENT_032;
+
 	init_rwsem(&led->rwsem);
 
-	ret = device_create_file(&client->dev, &bd2802_adv_conf_attr);
-	if (ret) {
-		dev_err(&client->dev, "failed to create sysfs file %s\n",
-					bd2802_adv_conf_attr.attr.name);
-		goto failed_free;
+	for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) {
+		ret = device_create_file(&led->client->dev,
+						bd2802_attributes[i]);
+		if (ret) {
+			dev_err(&led->client->dev, "failed: sysfs file %s\n",
+					bd2802_attributes[i]->attr.name);
+			goto failed_unregister_dev_file;
+		}
 	}
 
 	ret = bd2802_register_led_classdev(led);
@@ -686,7 +738,8 @@ static int __devinit bd2802_probe(struct i2c_client *client,
 	return 0;
 
 failed_unregister_dev_file:
-	device_remove_file(&client->dev, &bd2802_adv_conf_attr);
+	for (i--; i >= 0; i--)
+		device_remove_file(&led->client->dev, bd2802_attributes[i]);
 failed_free:
 	i2c_set_clientdata(client, NULL);
 	kfree(led);
@@ -697,12 +750,14 @@ failed_free:
 static int __exit bd2802_remove(struct i2c_client *client)
 {
 	struct bd2802_led *led = i2c_get_clientdata(client);
+	int i;
 
-	bd2802_unregister_led_classdev(led);
 	gpio_set_value(led->pdata->reset_gpio, 0);
+	bd2802_unregister_led_classdev(led);
 	if (led->adf_on)
 		bd2802_disable_adv_conf(led);
-	device_remove_file(&client->dev, &bd2802_adv_conf_attr);
+	for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++)
+		device_remove_file(&led->client->dev, bd2802_attributes[i]);
 	i2c_set_clientdata(client, NULL);
 	kfree(led);
 
@@ -723,8 +778,7 @@ static int bd2802_resume(struct i2c_client *client)
 	struct bd2802_led *led = i2c_get_clientdata(client);
 
 	if (!bd2802_is_all_off(led) || led->adf_on) {
-		gpio_set_value(led->pdata->reset_gpio, 1);
-		udelay(100);
+		bd2802_reset_cancel(led);
 		bd2802_restore_state(led);
 	}
 
@@ -762,4 +816,4 @@ module_exit(bd2802_exit);
 
 MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
 MODULE_DESCRIPTION("BD2802 LED driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c
index ff0e8c3fbf9..5f1ce810815 100644
--- a/drivers/leds/leds-cobalt-raq.c
+++ b/drivers/leds/leds-cobalt-raq.c
@@ -1,7 +1,7 @@
 /*
  *  LEDs driver for the Cobalt Raq series.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index d2109054de8..6b06638eb5b 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -76,7 +76,7 @@ static int __devinit create_gpio_led(const struct gpio_led *template,
 	struct gpio_led_data *led_dat, struct device *parent,
 	int (*blink_set)(unsigned, unsigned long *, unsigned long *))
 {
-	int ret;
+	int ret, state;
 
 	/* skip leds that aren't available */
 	if (!gpio_is_valid(template->gpio)) {
@@ -99,11 +99,15 @@ static int __devinit create_gpio_led(const struct gpio_led *template,
 		led_dat->cdev.blink_set = gpio_blink_set;
 	}
 	led_dat->cdev.brightness_set = gpio_led_set;
-	led_dat->cdev.brightness = LED_OFF;
+	if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP)
+		state = !!gpio_get_value(led_dat->gpio) ^ led_dat->active_low;
+	else
+		state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
+	led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
 	if (!template->retain_state_suspended)
 		led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
 
-	ret = gpio_direction_output(led_dat->gpio, led_dat->active_low);
+	ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state);
 	if (ret < 0)
 		goto err;
 
@@ -129,7 +133,7 @@ static void delete_gpio_led(struct gpio_led_data *led)
 }
 
 #ifdef CONFIG_LEDS_GPIO_PLATFORM
-static int gpio_led_probe(struct platform_device *pdev)
+static int __devinit gpio_led_probe(struct platform_device *pdev)
 {
 	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
 	struct gpio_led_data *leds_data;
@@ -223,12 +227,22 @@ static int __devinit of_gpio_leds_probe(struct of_device *ofdev,
 	memset(&led, 0, sizeof(led));
 	for_each_child_of_node(np, child) {
 		enum of_gpio_flags flags;
+		const char *state;
 
 		led.gpio = of_get_gpio_flags(child, 0, &flags);
 		led.active_low = flags & OF_GPIO_ACTIVE_LOW;
 		led.name = of_get_property(child, "label", NULL) ? : child->name;
 		led.default_trigger =
 			of_get_property(child, "linux,default-trigger", NULL);
+		state = of_get_property(child, "default-state", NULL);
+		if (state) {
+			if (!strcmp(state, "keep"))
+				led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
+			else if(!strcmp(state, "on"))
+				led.default_state = LEDS_GPIO_DEFSTATE_ON;
+			else
+				led.default_state = LEDS_GPIO_DEFSTATE_OFF;
+		}
 
 		ret = create_gpio_led(&led, &pdata->led_data[pdata->num_leds++],
 				      &ofdev->dev, NULL);
diff --git a/drivers/leds/leds-gta02-vibrator.c b/drivers/leds/leds-gta02-vibrator.c
new file mode 100644
index 00000000000..138af6d1496
--- /dev/null
+++ b/drivers/leds/leds-gta02-vibrator.c
@@ -0,0 +1,191 @@
+/*
+ * LED driver for the vibrator of the Openmoko GTA01/GTA02 GSM Phones
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Javi Roman <javiroman@kernel-labs.org>:
+ *	Implement PWM support for GTA01Bv4 and later
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <plat/pwm.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-fns.h>
+#include <plat/regs-timer.h>
+#include <linux/gta02-vibrator.h>
+
+#define COUNTER 64
+
+static struct gta02_vib_priv {
+	struct led_classdev cdev;
+	unsigned int gpio;
+	spinlock_t lock;
+	unsigned int has_pwm;
+	struct s3c2410_pwm pwm;
+
+	unsigned long vib_gpio_pin; /* which pin to meddle with */
+	uint8_t vib_pwm; /* 0 = OFF -- will ensure GPIO deasserted and stop FIQ */
+	uint8_t vib_pwm_latched;
+	uint8_t fiq_count;
+
+	struct gta02_vib_platform_data *pdata;
+} gta02_vib_priv;
+
+int gta02_vibrator_fiq_handler(void)
+{
+	gta02_vib_priv.fiq_count++;
+
+	if (!gta02_vib_priv.vib_pwm_latched && !gta02_vib_priv.vib_pwm)
+		/* idle */
+		return 0;
+
+	if (gta02_vib_priv.fiq_count == gta02_vib_priv.vib_pwm_latched)
+		s3c2410_gpio_setpin(gta02_vib_priv.vib_gpio_pin, 0);
+
+	if (gta02_vib_priv.fiq_count)
+		return 1;
+
+	gta02_vib_priv.vib_pwm_latched = gta02_vib_priv.vib_pwm;
+	if (gta02_vib_priv.vib_pwm_latched)
+		s3c2410_gpio_setpin(gta02_vib_priv.vib_gpio_pin, 1);
+
+	return 1;
+}
+
+static void gta02_vib_vib_set(struct led_classdev *led_cdev,
+				enum led_brightness value)
+{
+	gta02_vib_priv.vib_pwm = value; /* set it for FIQ */
+	gta02_vib_priv.pdata->kick_fiq(); /* start up FIQs if not already going */
+}
+
+static struct gta02_vib_priv gta02_vib_led = {
+	.cdev = {
+		.name = "gta02:vibrator",
+		.brightness_set = gta02_vib_vib_set,
+	},
+};
+
+static int gta02_vib_init_hw(struct gta02_vib_priv *vp)
+{
+	int rc;
+
+	rc = s3c2410_pwm_init(&vp->pwm);
+	if (rc)
+		return rc;
+
+	vp->pwm.timerid = PWM3;
+	/* use same prescaler as arch/arm/plat-s3c24xx/time.c */
+	vp->pwm.prescaler = (6 - 1) / 2;
+	vp->pwm.divider = S3C2410_TCFG1_MUX3_DIV2;
+	vp->pwm.counter = COUNTER;
+	vp->pwm.comparer = COUNTER;
+
+	rc = s3c2410_pwm_enable(&vp->pwm);
+	if (rc)
+		return rc;
+
+	s3c2410_pwm_start(&vp->pwm);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int gta02_vib_suspend(struct platform_device *dev, pm_message_t state)
+{
+	led_classdev_suspend(&gta02_vib_led.cdev);
+	if (gta02_vib_priv.pdata)
+		gta02_vib_priv.pdata->disable_fiq();
+	return 0;
+}
+
+static int gta02_vib_resume(struct platform_device *dev)
+{
+	struct gta02_vib_priv *vp = platform_get_drvdata(dev);
+
+	if (vp->has_pwm)
+		gta02_vib_init_hw(vp);
+
+	led_classdev_resume(&gta02_vib_led.cdev);
+	if (gta02_vib_priv.pdata)
+		gta02_vib_priv.pdata->enable_fiq();
+
+	return 0;
+}
+#else
+#define gta02_vib_suspend NULL
+#define gta02_vib_resume NULL
+#endif /* CONFIG_PM */
+
+static int __init gta02_vib_probe(struct platform_device *pdev)
+{
+	struct resource *r;
+
+	r = platform_get_resource(pdev, 0, 0);
+	if (!r || !r->start)
+		return -EIO;
+
+	gta02_vib_led.gpio = r->start;
+
+	gta02_vib_priv.pdata = pdev->dev.platform_data;
+	platform_set_drvdata(pdev, &gta02_vib_led);
+
+	s3c2410_gpio_setpin(gta02_vib_led.gpio, 0); /* off */
+	s3c2410_gpio_cfgpin(gta02_vib_led.gpio, S3C2410_GPIO_OUTPUT);
+	/* safe, kmalloc'd copy needed for FIQ ISR */
+	gta02_vib_priv.vib_gpio_pin = gta02_vib_led.gpio;
+	gta02_vib_priv.vib_pwm = 0; /* off */
+	spin_lock_init(&gta02_vib_led.lock);
+
+	return led_classdev_register(&pdev->dev, &gta02_vib_led.cdev);
+}
+
+static int gta02_vib_remove(struct platform_device *pdev)
+{
+	gta02_vib_priv.vib_pwm = 0; /* off */
+	/* would only need kick if already off so no kick needed */
+
+	if (gta02_vib_led.has_pwm)
+		s3c2410_pwm_disable(&gta02_vib_led.pwm);
+
+	led_classdev_unregister(&gta02_vib_led.cdev);
+
+	return 0;
+}
+
+static struct platform_driver gta02_vib_driver = {
+	.probe		= gta02_vib_probe,
+	.remove		= gta02_vib_remove,
+	.suspend	= gta02_vib_suspend,
+	.resume		= gta02_vib_resume,
+	.driver		= {
+		.name		= "gta02-vibrator",
+	},
+};
+
+static int __init gta02_vib_init(void)
+{
+	return platform_driver_register(&gta02_vib_driver);
+}
+module_init(gta02_vib_init);
+
+static void __exit gta02_vib_exit(void)
+{
+	platform_driver_unregister(&gta02_vib_driver);
+}
+module_exit(gta02_vib_exit);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Openmoko Freerunner vibrator driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-lp3944.c b/drivers/leds/leds-lp3944.c
new file mode 100644
index 00000000000..5946208ba26
--- /dev/null
+++ b/drivers/leds/leds-lp3944.c
@@ -0,0 +1,466 @@
+/*
+ * leds-lp3944.c - driver for National Semiconductor LP3944 Funlight Chip
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * I2C driver for National Semiconductor LP3944 Funlight Chip
+ * http://www.national.com/pf/LP/LP3944.html
+ *
+ * This helper chip can drive up to 8 leds, with two programmable DIM modes;
+ * it could even be used as a gpio expander but this driver assumes it is used
+ * as a led controller.
+ *
+ * The DIM modes are used to set _blink_ patterns for leds, the pattern is
+ * specified supplying two parameters:
+ *   - period: from 0s to 1.6s
+ *   - duty cycle: percentage of the period the led is on, from 0 to 100
+ *
+ * LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+ * leds, the camera flash light and the displays backlights.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/leds-lp3944.h>
+
+/* Read Only Registers */
+#define LP3944_REG_INPUT1     0x00 /* LEDs 0-7 InputRegister (Read Only) */
+#define LP3944_REG_REGISTER1  0x01 /* None (Read Only) */
+
+#define LP3944_REG_PSC0       0x02 /* Frequency Prescaler 0 (R/W) */
+#define LP3944_REG_PWM0       0x03 /* PWM Register 0 (R/W) */
+#define LP3944_REG_PSC1       0x04 /* Frequency Prescaler 1 (R/W) */
+#define LP3944_REG_PWM1       0x05 /* PWM Register 1 (R/W) */
+#define LP3944_REG_LS0        0x06 /* LEDs 0-3 Selector (R/W) */
+#define LP3944_REG_LS1        0x07 /* LEDs 4-7 Selector (R/W) */
+
+/* These registers are not used to control leds in LP3944, they can store
+ * arbitrary values which the chip will ignore.
+ */
+#define LP3944_REG_REGISTER8  0x08
+#define LP3944_REG_REGISTER9  0x09
+
+#define LP3944_DIM0 0
+#define LP3944_DIM1 1
+
+/* period in ms */
+#define LP3944_PERIOD_MIN 0
+#define LP3944_PERIOD_MAX 1600
+
+/* duty cycle is a percentage */
+#define LP3944_DUTY_CYCLE_MIN 0
+#define LP3944_DUTY_CYCLE_MAX 100
+
+#define ldev_to_led(c)       container_of(c, struct lp3944_led_data, ldev)
+
+/* Saved data */
+struct lp3944_led_data {
+	u8 id;
+	enum lp3944_type type;
+	enum lp3944_status status;
+	struct led_classdev ldev;
+	struct i2c_client *client;
+	struct work_struct work;
+};
+
+struct lp3944_data {
+	struct mutex lock;
+	struct i2c_client *client;
+	struct lp3944_led_data leds[LP3944_LEDS_MAX];
+};
+
+static int lp3944_reg_read(struct i2c_client *client, u8 reg, u8 *value)
+{
+	int tmp;
+
+	tmp = i2c_smbus_read_byte_data(client, reg);
+	if (tmp < 0)
+		return -EINVAL;
+
+	*value = tmp;
+
+	return 0;
+}
+
+static int lp3944_reg_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/**
+ * Set the period for DIM status
+ *
+ * @client: the i2c client
+ * @dim: either LP3944_DIM0 or LP3944_DIM1
+ * @period: period of a blink, that is a on/off cycle, expressed in ms.
+ */
+static int lp3944_dim_set_period(struct i2c_client *client, u8 dim, u16 period)
+{
+	u8 psc_reg;
+	u8 psc_value;
+	int err;
+
+	if (dim == LP3944_DIM0)
+		psc_reg = LP3944_REG_PSC0;
+	else if (dim == LP3944_DIM1)
+		psc_reg = LP3944_REG_PSC1;
+	else
+		return -EINVAL;
+
+	/* Convert period to Prescaler value */
+	if (period > LP3944_PERIOD_MAX)
+		return -EINVAL;
+
+	psc_value = (period * 255) / LP3944_PERIOD_MAX;
+
+	err = lp3944_reg_write(client, psc_reg, psc_value);
+
+	return err;
+}
+
+/**
+ * Set the duty cycle for DIM status
+ *
+ * @client: the i2c client
+ * @dim: either LP3944_DIM0 or LP3944_DIM1
+ * @duty_cycle: percentage of a period during which a led is ON
+ */
+static int lp3944_dim_set_dutycycle(struct i2c_client *client, u8 dim,
+				    u8 duty_cycle)
+{
+	u8 pwm_reg;
+	u8 pwm_value;
+	int err;
+
+	if (dim == LP3944_DIM0)
+		pwm_reg = LP3944_REG_PWM0;
+	else if (dim == LP3944_DIM1)
+		pwm_reg = LP3944_REG_PWM1;
+	else
+		return -EINVAL;
+
+	/* Convert duty cycle to PWM value */
+	if (duty_cycle > LP3944_DUTY_CYCLE_MAX)
+		return -EINVAL;
+
+	pwm_value = (duty_cycle * 255) / LP3944_DUTY_CYCLE_MAX;
+
+	err = lp3944_reg_write(client, pwm_reg, pwm_value);
+
+	return err;
+}
+
+/**
+ * Set the led status
+ *
+ * @led: a lp3944_led_data structure
+ * @status: one of LP3944_LED_STATUS_OFF
+ *                 LP3944_LED_STATUS_ON
+ *                 LP3944_LED_STATUS_DIM0
+ *                 LP3944_LED_STATUS_DIM1
+ */
+static int lp3944_led_set(struct lp3944_led_data *led, u8 status)
+{
+	struct lp3944_data *data = i2c_get_clientdata(led->client);
+	u8 id = led->id;
+	u8 reg;
+	u8 val = 0;
+	int err;
+
+	dev_dbg(&led->client->dev, "%s: %s, status before normalization:%d\n",
+		__func__, led->ldev.name, status);
+
+	switch (id) {
+	case LP3944_LED0:
+	case LP3944_LED1:
+	case LP3944_LED2:
+	case LP3944_LED3:
+		reg = LP3944_REG_LS0;
+		break;
+	case LP3944_LED4:
+	case LP3944_LED5:
+	case LP3944_LED6:
+	case LP3944_LED7:
+		id -= LP3944_LED4;
+		reg = LP3944_REG_LS1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (status > LP3944_LED_STATUS_DIM1)
+		return -EINVAL;
+
+	/* invert only 0 and 1, leave unchanged the other values,
+	 * remember we are abusing status to set blink patterns
+	 */
+	if (led->type == LP3944_LED_TYPE_LED_INVERTED && status < 2)
+		status = 1 - status;
+
+	mutex_lock(&data->lock);
+	lp3944_reg_read(led->client, reg, &val);
+
+	val &= ~(LP3944_LED_STATUS_MASK << (id << 1));
+	val |= (status << (id << 1));
+
+	dev_dbg(&led->client->dev, "%s: %s, reg:%d id:%d status:%d val:%#x\n",
+		__func__, led->ldev.name, reg, id, status, val);
+
+	/* set led status */
+	err = lp3944_reg_write(led->client, reg, val);
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static int lp3944_led_set_blink(struct led_classdev *led_cdev,
+				unsigned long *delay_on,
+				unsigned long *delay_off)
+{
+	struct lp3944_led_data *led = ldev_to_led(led_cdev);
+	u16 period;
+	u8 duty_cycle;
+	int err;
+
+	/* units are in ms */
+	if (*delay_on + *delay_off > LP3944_PERIOD_MAX)
+		return -EINVAL;
+
+	if (*delay_on == 0 && *delay_off == 0) {
+		/* Special case: the leds subsystem requires a default user
+		 * friendly blink pattern for the LED.  Let's blink the led
+		 * slowly (1Hz).
+		 */
+		*delay_on = 500;
+		*delay_off = 500;
+	}
+
+	period = (*delay_on) + (*delay_off);
+
+	/* duty_cycle is the percentage of period during which the led is ON */
+	duty_cycle = 100 * (*delay_on) / period;
+
+	/* invert duty cycle for inverted leds, this has the same effect of
+	 * swapping delay_on and delay_off
+	 */
+	if (led->type == LP3944_LED_TYPE_LED_INVERTED)
+		duty_cycle = 100 - duty_cycle;
+
+	/* NOTE: using always the first DIM mode, this means that all leds
+	 * will have the same blinking pattern.
+	 *
+	 * We could find a way later to have two leds blinking in hardware
+	 * with different patterns at the same time, falling back to software
+	 * control for the other ones.
+	 */
+	err = lp3944_dim_set_period(led->client, LP3944_DIM0, period);
+	if (err)
+		return err;
+
+	err = lp3944_dim_set_dutycycle(led->client, LP3944_DIM0, duty_cycle);
+	if (err)
+		return err;
+
+	dev_dbg(&led->client->dev, "%s: OK hardware accelerated blink!\n",
+		__func__);
+
+	led->status = LP3944_LED_STATUS_DIM0;
+	schedule_work(&led->work);
+
+	return 0;
+}
+
+static void lp3944_led_set_brightness(struct led_classdev *led_cdev,
+				      enum led_brightness brightness)
+{
+	struct lp3944_led_data *led = ldev_to_led(led_cdev);
+
+	dev_dbg(&led->client->dev, "%s: %s, %d\n",
+		__func__, led_cdev->name, brightness);
+
+	led->status = brightness;
+	schedule_work(&led->work);
+}
+
+static void lp3944_led_work(struct work_struct *work)
+{
+	struct lp3944_led_data *led;
+
+	led = container_of(work, struct lp3944_led_data, work);
+	lp3944_led_set(led, led->status);
+}
+
+static int lp3944_configure(struct i2c_client *client,
+			    struct lp3944_data *data,
+			    struct lp3944_platform_data *pdata)
+{
+	int i, err = 0;
+
+	for (i = 0; i < pdata->leds_size; i++) {
+		struct lp3944_led *pled = &pdata->leds[i];
+		struct lp3944_led_data *led = &data->leds[i];
+		led->client = client;
+		led->id = i;
+
+		switch (pled->type) {
+
+		case LP3944_LED_TYPE_LED:
+		case LP3944_LED_TYPE_LED_INVERTED:
+			led->type = pled->type;
+			led->status = pled->status;
+			led->ldev.name = pled->name;
+			led->ldev.max_brightness = 1;
+			led->ldev.brightness_set = lp3944_led_set_brightness;
+			led->ldev.blink_set = lp3944_led_set_blink;
+			led->ldev.flags = LED_CORE_SUSPENDRESUME;
+
+			INIT_WORK(&led->work, lp3944_led_work);
+			err = led_classdev_register(&client->dev, &led->ldev);
+			if (err < 0) {
+				dev_err(&client->dev,
+					"couldn't register LED %s\n",
+					led->ldev.name);
+				goto exit;
+			}
+
+			/* to expose the default value to userspace */
+			led->ldev.brightness = led->status;
+
+			/* Set the default led status */
+			err = lp3944_led_set(led, led->status);
+			if (err < 0) {
+				dev_err(&client->dev,
+					"%s couldn't set STATUS %d\n",
+					led->ldev.name, led->status);
+				goto exit;
+			}
+			break;
+
+		case LP3944_LED_TYPE_NONE:
+		default:
+			break;
+
+		}
+	}
+	return 0;
+
+exit:
+	if (i > 0)
+		for (i = i - 1; i >= 0; i--)
+			switch (pdata->leds[i].type) {
+
+			case LP3944_LED_TYPE_LED:
+			case LP3944_LED_TYPE_LED_INVERTED:
+				led_classdev_unregister(&data->leds[i].ldev);
+				cancel_work_sync(&data->leds[i].work);
+				break;
+
+			case LP3944_LED_TYPE_NONE:
+			default:
+				break;
+			}
+
+	return err;
+}
+
+static int __devinit lp3944_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct lp3944_platform_data *lp3944_pdata = client->dev.platform_data;
+	struct lp3944_data *data;
+
+	if (lp3944_pdata == NULL) {
+		dev_err(&client->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	/* Let's see whether this adapter can support what we need. */
+	if (!i2c_check_functionality(client->adapter,
+				I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev, "insufficient functionality!\n");
+		return -ENODEV;
+	}
+
+	data = kzalloc(sizeof(struct lp3944_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	i2c_set_clientdata(client, data);
+
+	mutex_init(&data->lock);
+
+	dev_info(&client->dev, "lp3944 enabled\n");
+
+	lp3944_configure(client, data, lp3944_pdata);
+	return 0;
+}
+
+static int __devexit lp3944_remove(struct i2c_client *client)
+{
+	struct lp3944_platform_data *pdata = client->dev.platform_data;
+	struct lp3944_data *data = i2c_get_clientdata(client);
+	int i;
+
+	for (i = 0; i < pdata->leds_size; i++)
+		switch (data->leds[i].type) {
+		case LP3944_LED_TYPE_LED:
+		case LP3944_LED_TYPE_LED_INVERTED:
+			led_classdev_unregister(&data->leds[i].ldev);
+			cancel_work_sync(&data->leds[i].work);
+			break;
+
+		case LP3944_LED_TYPE_NONE:
+		default:
+			break;
+		}
+
+	kfree(data);
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+/* lp3944 i2c driver struct */
+static const struct i2c_device_id lp3944_id[] = {
+	{"lp3944", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, lp3944_id);
+
+static struct i2c_driver lp3944_driver = {
+	.driver   = {
+		   .name = "lp3944",
+	},
+	.probe    = lp3944_probe,
+	.remove   = __devexit_p(lp3944_remove),
+	.id_table = lp3944_id,
+};
+
+static int __init lp3944_module_init(void)
+{
+	return i2c_add_driver(&lp3944_driver);
+}
+
+static void __exit lp3944_module_exit(void)
+{
+	i2c_del_driver(&lp3944_driver);
+}
+
+module_init(lp3944_module_init);
+module_exit(lp3944_module_exit);
+
+MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>");
+MODULE_DESCRIPTION("LP3944 Fun Light Chip");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 3937244fdca..dba8921240f 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -35,7 +35,7 @@ struct pca9532_data {
 	struct pca9532_led leds[16];
 	struct mutex update_lock;
 	struct input_dev    *idev;
-       struct work_struct work;
+	struct work_struct work;
 	u8 pwm[2];
 	u8 psc[2];
 };
@@ -87,14 +87,14 @@ static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink,
 	if (b > 0xFF)
 		return -EINVAL;
 	data->pwm[pwm] = b;
-       data->psc[pwm] = blink;
-       return 0;
+	data->psc[pwm] = blink;
+	return 0;
 }
 
 static int pca9532_setpwm(struct i2c_client *client, int pwm)
 {
-       struct pca9532_data *data = i2c_get_clientdata(client);
-       mutex_lock(&data->update_lock);
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	mutex_lock(&data->update_lock);
 	i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm),
 		data->pwm[pwm]);
 	i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm),
@@ -132,11 +132,11 @@ static void pca9532_set_brightness(struct led_classdev *led_cdev,
 		led->state = PCA9532_ON;
 	else {
 		led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */
-               err = pca9532_calcpwm(led->client, 0, 0, value);
+		err = pca9532_calcpwm(led->client, 0, 0, value);
 		if (err)
 			return; /* XXX: led api doesn't allow error code? */
 	}
-       schedule_work(&led->work);
+	schedule_work(&led->work);
 }
 
 static int pca9532_set_blink(struct led_classdev *led_cdev,
@@ -145,7 +145,7 @@ static int pca9532_set_blink(struct led_classdev *led_cdev,
 	struct pca9532_led *led = ldev_to_led(led_cdev);
 	struct i2c_client *client = led->client;
 	int psc;
-       int err = 0;
+	int err = 0;
 
 	if (*delay_on == 0 && *delay_off == 0) {
 	/* led subsystem ask us for a blink rate */
@@ -157,11 +157,11 @@ static int pca9532_set_blink(struct led_classdev *led_cdev,
 
 	/* Thecus specific: only use PSC/PWM 0 */
 	psc = (*delay_on * 152-1)/1000;
-       err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
-       if (err)
-               return err;
-       schedule_work(&led->work);
-       return 0;
+	err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
+	if (err)
+		return err;
+	schedule_work(&led->work);
+	return 0;
 }
 
 static int pca9532_event(struct input_dev *dev, unsigned int type,
@@ -178,15 +178,15 @@ static int pca9532_event(struct input_dev *dev, unsigned int type,
 	else
 		data->pwm[1] = 0;
 
-       schedule_work(&data->work);
+	schedule_work(&data->work);
 
-       return 0;
+	return 0;
 }
 
 static void pca9532_input_work(struct work_struct *work)
 {
-       struct pca9532_data *data;
-       data = container_of(work, struct pca9532_data, work);
+	struct pca9532_data *data;
+	data = container_of(work, struct pca9532_data, work);
 	mutex_lock(&data->update_lock);
 	i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1),
 		data->pwm[1]);
@@ -195,11 +195,11 @@ static void pca9532_input_work(struct work_struct *work)
 
 static void pca9532_led_work(struct work_struct *work)
 {
-       struct pca9532_led *led;
-       led = container_of(work, struct pca9532_led, work);
-       if (led->state == PCA9532_PWM0)
-               pca9532_setpwm(led->client, 0);
-       pca9532_setled(led);
+	struct pca9532_led *led;
+	led = container_of(work, struct pca9532_led, work);
+	if (led->state == PCA9532_PWM0)
+		pca9532_setpwm(led->client, 0);
+	pca9532_setled(led);
 }
 
 static int pca9532_configure(struct i2c_client *client,
@@ -232,7 +232,7 @@ static int pca9532_configure(struct i2c_client *client,
 			led->ldev.brightness = LED_OFF;
 			led->ldev.brightness_set = pca9532_set_brightness;
 			led->ldev.blink_set = pca9532_set_blink;
-                       INIT_WORK(&led->work, pca9532_led_work);
+			INIT_WORK(&led->work, pca9532_led_work);
 			err = led_classdev_register(&client->dev, &led->ldev);
 			if (err < 0) {
 				dev_err(&client->dev,
@@ -262,11 +262,11 @@ static int pca9532_configure(struct i2c_client *client,
 						BIT_MASK(SND_TONE);
 			data->idev->event = pca9532_event;
 			input_set_drvdata(data->idev, data);
-                       INIT_WORK(&data->work, pca9532_input_work);
+			INIT_WORK(&data->work, pca9532_input_work);
 			err = input_register_device(data->idev);
 			if (err) {
 				input_free_device(data->idev);
-                               cancel_work_sync(&data->work);
+				cancel_work_sync(&data->work);
 				data->idev = NULL;
 				goto exit;
 			}
@@ -283,13 +283,13 @@ exit:
 				break;
 			case PCA9532_TYPE_LED:
 				led_classdev_unregister(&data->leds[i].ldev);
-                               cancel_work_sync(&data->leds[i].work);
+				cancel_work_sync(&data->leds[i].work);
 				break;
 			case PCA9532_TYPE_N2100_BEEP:
 				if (data->idev != NULL) {
 					input_unregister_device(data->idev);
 					input_free_device(data->idev);
-                                       cancel_work_sync(&data->work);
+					cancel_work_sync(&data->work);
 					data->idev = NULL;
 				}
 				break;
@@ -340,13 +340,13 @@ static int pca9532_remove(struct i2c_client *client)
 			break;
 		case PCA9532_TYPE_LED:
 			led_classdev_unregister(&data->leds[i].ldev);
-                       cancel_work_sync(&data->leds[i].work);
+			cancel_work_sync(&data->leds[i].work);
 			break;
 		case PCA9532_TYPE_N2100_BEEP:
 			if (data->idev != NULL) {
 				input_unregister_device(data->idev);
 				input_free_device(data->idev);
-                               cancel_work_sync(&data->work);
+				cancel_work_sync(&data->work);
 				data->idev = NULL;
 			}
 			break;
diff --git a/drivers/leds/ledtrig-gpio.c b/drivers/leds/ledtrig-gpio.c
index a247ae63374..1bc5db4ece0 100644
--- a/drivers/leds/ledtrig-gpio.c
+++ b/drivers/leds/ledtrig-gpio.c
@@ -117,6 +117,9 @@ static ssize_t gpio_trig_inverted_store(struct device *dev,
 
 	gpio_data->inverted = !!inverted;
 
+	/* After inverting, we need to update the LED. */
+	schedule_work(&gpio_data->work);
+
 	return n;
 }
 static DEVICE_ATTR(inverted, 0644, gpio_trig_inverted_show,
@@ -146,20 +149,26 @@ static ssize_t gpio_trig_gpio_store(struct device *dev,
 		return -EINVAL;
 	}
 
+	if (gpio_data->gpio == gpio)
+		return n;
+
 	if (!gpio) {
-		free_irq(gpio_to_irq(gpio_data->gpio), led);
+		if (gpio_data->gpio != 0)
+			free_irq(gpio_to_irq(gpio_data->gpio), led);
+		gpio_data->gpio = 0;
 		return n;
 	}
 
-	if (gpio_data->gpio > 0 && gpio_data->gpio != gpio)
-		free_irq(gpio_to_irq(gpio_data->gpio), led);
-
-	gpio_data->gpio = gpio;
 	ret = request_irq(gpio_to_irq(gpio), gpio_trig_irq,
 			IRQF_SHARED | IRQF_TRIGGER_RISING
 			| IRQF_TRIGGER_FALLING, "ledtrig-gpio", led);
-	if (ret)
+	if (ret) {
 		dev_err(dev, "request_irq failed with error %d\n", ret);
+	} else {
+		if (gpio_data->gpio != 0)
+			free_irq(gpio_to_irq(gpio_data->gpio), led);
+		gpio_data->gpio = gpio;
+	}
 
 	return ret ? ret : n;
 }
@@ -211,7 +220,8 @@ static void gpio_trig_deactivate(struct led_classdev *led)
 		device_remove_file(led->dev, &dev_attr_inverted);
 		device_remove_file(led->dev, &dev_attr_desired_brightness);
 		flush_work(&gpio_data->work);
-		free_irq(gpio_to_irq(gpio_data->gpio),led);
+		if (gpio_data->gpio != 0)
+			free_irq(gpio_to_irq(gpio_data->gpio), led);
 		kfree(gpio_data);
 	}
 }
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index a6974e9b8eb..1e2cb846b3c 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -1,6 +1,8 @@
-/*P:400 This contains run_guest() which actually calls into the Host<->Guest
+/*P:400
+ * This contains run_guest() which actually calls into the Host<->Guest
  * Switcher and analyzes the return, such as determining if the Guest wants the
- * Host to do something.  This file also contains useful helper routines. :*/
+ * Host to do something.  This file also contains useful helper routines.
+:*/
 #include <linux/module.h>
 #include <linux/stringify.h>
 #include <linux/stddef.h>
@@ -24,7 +26,8 @@ static struct page **switcher_page;
 /* This One Big lock protects all inter-guest data structures. */
 DEFINE_MUTEX(lguest_lock);
 
-/*H:010 We need to set up the Switcher at a high virtual address.  Remember the
+/*H:010
+ * We need to set up the Switcher at a high virtual address.  Remember the
  * Switcher is a few hundred bytes of assembler code which actually changes the
  * CPU to run the Guest, and then changes back to the Host when a trap or
  * interrupt happens.
@@ -33,7 +36,8 @@ DEFINE_MUTEX(lguest_lock);
  * Host since it will be running as the switchover occurs.
  *
  * Trying to map memory at a particular address is an unusual thing to do, so
- * it's not a simple one-liner. */
+ * it's not a simple one-liner.
+ */
 static __init int map_switcher(void)
 {
 	int i, err;
@@ -47,8 +51,10 @@ static __init int map_switcher(void)
 	 * easy.
 	 */
 
-	/* We allocate an array of struct page pointers.  map_vm_area() wants
-	 * this, rather than just an array of pages. */
+	/*
+	 * We allocate an array of struct page pointers.  map_vm_area() wants
+	 * this, rather than just an array of pages.
+	 */
 	switcher_page = kmalloc(sizeof(switcher_page[0])*TOTAL_SWITCHER_PAGES,
 				GFP_KERNEL);
 	if (!switcher_page) {
@@ -56,8 +62,10 @@ static __init int map_switcher(void)
 		goto out;
 	}
 
-	/* Now we actually allocate the pages.  The Guest will see these pages,
-	 * so we make sure they're zeroed. */
+	/*
+	 * Now we actually allocate the pages.  The Guest will see these pages,
+	 * so we make sure they're zeroed.
+	 */
 	for (i = 0; i < TOTAL_SWITCHER_PAGES; i++) {
 		unsigned long addr = get_zeroed_page(GFP_KERNEL);
 		if (!addr) {
@@ -67,19 +75,23 @@ static __init int map_switcher(void)
 		switcher_page[i] = virt_to_page(addr);
 	}
 
-	/* First we check that the Switcher won't overlap the fixmap area at
+	/*
+	 * First we check that the Switcher won't overlap the fixmap area at
 	 * the top of memory.  It's currently nowhere near, but it could have
-	 * very strange effects if it ever happened. */
+	 * very strange effects if it ever happened.
+	 */
 	if (SWITCHER_ADDR + (TOTAL_SWITCHER_PAGES+1)*PAGE_SIZE > FIXADDR_START){
 		err = -ENOMEM;
 		printk("lguest: mapping switcher would thwack fixmap\n");
 		goto free_pages;
 	}
 
-	/* Now we reserve the "virtual memory area" we want: 0xFFC00000
+	/*
+	 * Now we reserve the "virtual memory area" we want: 0xFFC00000
 	 * (SWITCHER_ADDR).  We might not get it in theory, but in practice
 	 * it's worked so far.  The end address needs +1 because __get_vm_area
-	 * allocates an extra guard page, so we need space for that. */
+	 * allocates an extra guard page, so we need space for that.
+	 */
 	switcher_vma = __get_vm_area(TOTAL_SWITCHER_PAGES * PAGE_SIZE,
 				     VM_ALLOC, SWITCHER_ADDR, SWITCHER_ADDR
 				     + (TOTAL_SWITCHER_PAGES+1) * PAGE_SIZE);
@@ -89,11 +101,13 @@ static __init int map_switcher(void)
 		goto free_pages;
 	}
 
-	/* This code actually sets up the pages we've allocated to appear at
+	/*
+	 * This code actually sets up the pages we've allocated to appear at
 	 * SWITCHER_ADDR.  map_vm_area() takes the vma we allocated above, the
 	 * kind of pages we're mapping (kernel pages), and a pointer to our
 	 * array of struct pages.  It increments that pointer, but we don't
-	 * care. */
+	 * care.
+	 */
 	pagep = switcher_page;
 	err = map_vm_area(switcher_vma, PAGE_KERNEL_EXEC, &pagep);
 	if (err) {
@@ -101,8 +115,10 @@ static __init int map_switcher(void)
 		goto free_vma;
 	}
 
-	/* Now the Switcher is mapped at the right address, we can't fail!
-	 * Copy in the compiled-in Switcher code (from <arch>_switcher.S). */
+	/*
+	 * Now the Switcher is mapped at the right address, we can't fail!
+	 * Copy in the compiled-in Switcher code (from <arch>_switcher.S).
+	 */
 	memcpy(switcher_vma->addr, start_switcher_text,
 	       end_switcher_text - start_switcher_text);
 
@@ -124,8 +140,7 @@ out:
 }
 /*:*/
 
-/* Cleaning up the mapping when the module is unloaded is almost...
- * too easy. */
+/* Cleaning up the mapping when the module is unloaded is almost... too easy. */
 static void unmap_switcher(void)
 {
 	unsigned int i;
@@ -151,16 +166,19 @@ static void unmap_switcher(void)
  * But we can't trust the Guest: it might be trying to access the Launcher
  * code.  We have to check that the range is below the pfn_limit the Launcher
  * gave us.  We have to make sure that addr + len doesn't give us a false
- * positive by overflowing, too. */
+ * positive by overflowing, too.
+ */
 bool lguest_address_ok(const struct lguest *lg,
 		       unsigned long addr, unsigned long len)
 {
 	return (addr+len) / PAGE_SIZE < lg->pfn_limit && (addr+len >= addr);
 }
 
-/* This routine copies memory from the Guest.  Here we can see how useful the
+/*
+ * This routine copies memory from the Guest.  Here we can see how useful the
  * kill_lguest() routine we met in the Launcher can be: we return a random
- * value (all zeroes) instead of needing to return an error. */
+ * value (all zeroes) instead of needing to return an error.
+ */
 void __lgread(struct lg_cpu *cpu, void *b, unsigned long addr, unsigned bytes)
 {
 	if (!lguest_address_ok(cpu->lg, addr, bytes)
@@ -181,9 +199,11 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
 }
 /*:*/
 
-/*H:030 Let's jump straight to the the main loop which runs the Guest.
+/*H:030
+ * Let's jump straight to the the main loop which runs the Guest.
  * Remember, this is called by the Launcher reading /dev/lguest, and we keep
- * going around and around until something interesting happens. */
+ * going around and around until something interesting happens.
+ */
 int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 {
 	/* We stop running once the Guest is dead. */
@@ -195,10 +215,17 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 		if (cpu->hcall)
 			do_hypercalls(cpu);
 
-		/* It's possible the Guest did a NOTIFY hypercall to the
-		 * Launcher, in which case we return from the read() now. */
+		/*
+		 * It's possible the Guest did a NOTIFY hypercall to the
+		 * Launcher.
+		 */
 		if (cpu->pending_notify) {
+			/*
+			 * Does it just needs to write to a registered
+			 * eventfd (ie. the appropriate virtqueue thread)?
+			 */
 			if (!send_notify_to_eventfd(cpu)) {
+				/* OK, we tell the main Laucher. */
 				if (put_user(cpu->pending_notify, user))
 					return -EFAULT;
 				return sizeof(cpu->pending_notify);
@@ -209,29 +236,39 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
-		/* Check if there are any interrupts which can be delivered now:
+		/*
+		 * Check if there are any interrupts which can be delivered now:
 		 * if so, this sets up the hander to be executed when we next
-		 * run the Guest. */
+		 * run the Guest.
+		 */
 		irq = interrupt_pending(cpu, &more);
 		if (irq < LGUEST_IRQS)
 			try_deliver_interrupt(cpu, irq, more);
 
-		/* All long-lived kernel loops need to check with this horrible
+		/*
+		 * All long-lived kernel loops need to check with this horrible
 		 * thing called the freezer.  If the Host is trying to suspend,
-		 * it stops us. */
+		 * it stops us.
+		 */
 		try_to_freeze();
 
-		/* Just make absolutely sure the Guest is still alive.  One of
-		 * those hypercalls could have been fatal, for example. */
+		/*
+		 * Just make absolutely sure the Guest is still alive.  One of
+		 * those hypercalls could have been fatal, for example.
+		 */
 		if (cpu->lg->dead)
 			break;
 
-		/* If the Guest asked to be stopped, we sleep.  The Guest's
-		 * clock timer will wake us. */
+		/*
+		 * If the Guest asked to be stopped, we sleep.  The Guest's
+		 * clock timer will wake us.
+		 */
 		if (cpu->halted) {
 			set_current_state(TASK_INTERRUPTIBLE);
-			/* Just before we sleep, make sure no interrupt snuck in
-			 * which we should be doing. */
+			/*
+			 * Just before we sleep, make sure no interrupt snuck in
+			 * which we should be doing.
+			 */
 			if (interrupt_pending(cpu, &more) < LGUEST_IRQS)
 				set_current_state(TASK_RUNNING);
 			else
@@ -239,8 +276,10 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 			continue;
 		}
 
-		/* OK, now we're ready to jump into the Guest.  First we put up
-		 * the "Do Not Disturb" sign: */
+		/*
+		 * OK, now we're ready to jump into the Guest.  First we put up
+		 * the "Do Not Disturb" sign:
+		 */
 		local_irq_disable();
 
 		/* Actually run the Guest until something happens. */
@@ -327,8 +366,10 @@ static void __exit fini(void)
 }
 /*:*/
 
-/* The Host side of lguest can be a module.  This is a nice way for people to
- * play with it.  */
+/*
+ * The Host side of lguest can be a module.  This is a nice way for people to
+ * play with it.
+ */
 module_init(init);
 module_exit(fini);
 MODULE_LICENSE("GPL");
diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c
index c29ffa19cb7..83511eb0923 100644
--- a/drivers/lguest/hypercalls.c
+++ b/drivers/lguest/hypercalls.c
@@ -1,8 +1,10 @@
-/*P:500 Just as userspace programs request kernel operations through a system
+/*P:500
+ * Just as userspace programs request kernel operations through a system
  * call, the Guest requests Host operations through a "hypercall".  You might
  * notice this nomenclature doesn't really follow any logic, but the name has
  * been around for long enough that we're stuck with it.  As you'd expect, this
- * code is basically a one big switch statement. :*/
+ * code is basically a one big switch statement.
+:*/
 
 /*  Copyright (C) 2006 Rusty Russell IBM Corporation
 
@@ -28,30 +30,41 @@
 #include <asm/pgtable.h>
 #include "lg.h"
 
-/*H:120 This is the core hypercall routine: where the Guest gets what it wants.
- * Or gets killed.  Or, in the case of LHCALL_SHUTDOWN, both. */
+/*H:120
+ * This is the core hypercall routine: where the Guest gets what it wants.
+ * Or gets killed.  Or, in the case of LHCALL_SHUTDOWN, both.
+ */
 static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
 {
 	switch (args->arg0) {
 	case LHCALL_FLUSH_ASYNC:
-		/* This call does nothing, except by breaking out of the Guest
-		 * it makes us process all the asynchronous hypercalls. */
+		/*
+		 * This call does nothing, except by breaking out of the Guest
+		 * it makes us process all the asynchronous hypercalls.
+		 */
 		break;
 	case LHCALL_SEND_INTERRUPTS:
-		/* This call does nothing too, but by breaking out of the Guest
-		 * it makes us process any pending interrupts. */
+		/*
+		 * This call does nothing too, but by breaking out of the Guest
+		 * it makes us process any pending interrupts.
+		 */
 		break;
 	case LHCALL_LGUEST_INIT:
-		/* You can't get here unless you're already initialized.  Don't
-		 * do that. */
+		/*
+		 * You can't get here unless you're already initialized.  Don't
+		 * do that.
+		 */
 		kill_guest(cpu, "already have lguest_data");
 		break;
 	case LHCALL_SHUTDOWN: {
-		/* Shutdown is such a trivial hypercall that we do it in four
-		 * lines right here. */
 		char msg[128];
-		/* If the lgread fails, it will call kill_guest() itself; the
-		 * kill_guest() with the message will be ignored. */
+		/*
+		 * Shutdown is such a trivial hypercall that we do it in five
+		 * lines right here.
+		 *
+		 * If the lgread fails, it will call kill_guest() itself; the
+		 * kill_guest() with the message will be ignored.
+		 */
 		__lgread(cpu, msg, args->arg1, sizeof(msg));
 		msg[sizeof(msg)-1] = '\0';
 		kill_guest(cpu, "CRASH: %s", msg);
@@ -60,16 +73,17 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
 		break;
 	}
 	case LHCALL_FLUSH_TLB:
-		/* FLUSH_TLB comes in two flavors, depending on the
-		 * argument: */
+		/* FLUSH_TLB comes in two flavors, depending on the argument: */
 		if (args->arg1)
 			guest_pagetable_clear_all(cpu);
 		else
 			guest_pagetable_flush_user(cpu);
 		break;
 
-	/* All these calls simply pass the arguments through to the right
-	 * routines. */
+	/*
+	 * All these calls simply pass the arguments through to the right
+	 * routines.
+	 */
 	case LHCALL_NEW_PGTABLE:
 		guest_new_pagetable(cpu, args->arg1);
 		break;
@@ -112,15 +126,16 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
 			kill_guest(cpu, "Bad hypercall %li\n", args->arg0);
 	}
 }
-/*:*/
 
-/*H:124 Asynchronous hypercalls are easy: we just look in the array in the
+/*H:124
+ * Asynchronous hypercalls are easy: we just look in the array in the
  * Guest's "struct lguest_data" to see if any new ones are marked "ready".
  *
  * We are careful to do these in order: obviously we respect the order the
  * Guest put them in the ring, but we also promise the Guest that they will
  * happen before any normal hypercall (which is why we check this before
- * checking for a normal hcall). */
+ * checking for a normal hcall).
+ */
 static void do_async_hcalls(struct lg_cpu *cpu)
 {
 	unsigned int i;
@@ -133,22 +148,28 @@ static void do_async_hcalls(struct lg_cpu *cpu)
 	/* We process "struct lguest_data"s hcalls[] ring once. */
 	for (i = 0; i < ARRAY_SIZE(st); i++) {
 		struct hcall_args args;
-		/* We remember where we were up to from last time.  This makes
+		/*
+		 * We remember where we were up to from last time.  This makes
 		 * sure that the hypercalls are done in the order the Guest
-		 * places them in the ring. */
+		 * places them in the ring.
+		 */
 		unsigned int n = cpu->next_hcall;
 
 		/* 0xFF means there's no call here (yet). */
 		if (st[n] == 0xFF)
 			break;
 
-		/* OK, we have hypercall.  Increment the "next_hcall" cursor,
-		 * and wrap back to 0 if we reach the end. */
+		/*
+		 * OK, we have hypercall.  Increment the "next_hcall" cursor,
+		 * and wrap back to 0 if we reach the end.
+		 */
 		if (++cpu->next_hcall == LHCALL_RING_SIZE)
 			cpu->next_hcall = 0;
 
-		/* Copy the hypercall arguments into a local copy of
-		 * the hcall_args struct. */
+		/*
+		 * Copy the hypercall arguments into a local copy of the
+		 * hcall_args struct.
+		 */
 		if (copy_from_user(&args, &cpu->lg->lguest_data->hcalls[n],
 				   sizeof(struct hcall_args))) {
 			kill_guest(cpu, "Fetching async hypercalls");
@@ -164,19 +185,25 @@ static void do_async_hcalls(struct lg_cpu *cpu)
 			break;
 		}
 
-		/* Stop doing hypercalls if they want to notify the Launcher:
-		 * it needs to service this first. */
+		/*
+		 * Stop doing hypercalls if they want to notify the Launcher:
+		 * it needs to service this first.
+		 */
 		if (cpu->pending_notify)
 			break;
 	}
 }
 
-/* Last of all, we look at what happens first of all.  The very first time the
- * Guest makes a hypercall, we end up here to set things up: */
+/*
+ * Last of all, we look at what happens first of all.  The very first time the
+ * Guest makes a hypercall, we end up here to set things up:
+ */
 static void initialize(struct lg_cpu *cpu)
 {
-	/* You can't do anything until you're initialized.  The Guest knows the
-	 * rules, so we're unforgiving here. */
+	/*
+	 * You can't do anything until you're initialized.  The Guest knows the
+	 * rules, so we're unforgiving here.
+	 */
 	if (cpu->hcall->arg0 != LHCALL_LGUEST_INIT) {
 		kill_guest(cpu, "hypercall %li before INIT", cpu->hcall->arg0);
 		return;
@@ -185,32 +212,44 @@ static void initialize(struct lg_cpu *cpu)
 	if (lguest_arch_init_hypercalls(cpu))
 		kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
 
-	/* The Guest tells us where we're not to deliver interrupts by putting
-	 * the range of addresses into "struct lguest_data". */
+	/*
+	 * The Guest tells us where we're not to deliver interrupts by putting
+	 * the range of addresses into "struct lguest_data".
+	 */
 	if (get_user(cpu->lg->noirq_start, &cpu->lg->lguest_data->noirq_start)
 	    || get_user(cpu->lg->noirq_end, &cpu->lg->lguest_data->noirq_end))
 		kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
 
-	/* We write the current time into the Guest's data page once so it can
-	 * set its clock. */
+	/*
+	 * We write the current time into the Guest's data page once so it can
+	 * set its clock.
+	 */
 	write_timestamp(cpu);
 
 	/* page_tables.c will also do some setup. */
 	page_table_guest_data_init(cpu);
 
-	/* This is the one case where the above accesses might have been the
+	/*
+	 * This is the one case where the above accesses might have been the
 	 * first write to a Guest page.  This may have caused a copy-on-write
 	 * fault, but the old page might be (read-only) in the Guest
-	 * pagetable. */
+	 * pagetable.
+	 */
 	guest_pagetable_clear_all(cpu);
 }
 /*:*/
 
-/*M:013 If a Guest reads from a page (so creates a mapping) that it has never
+/*M:013
+ * If a Guest reads from a page (so creates a mapping) that it has never
  * written to, and then the Launcher writes to it (ie. the output of a virtual
  * device), the Guest will still see the old page.  In practice, this never
  * happens: why would the Guest read a page which it has never written to?  But
- * a similar scenario might one day bite us, so it's worth mentioning. :*/
+ * a similar scenario might one day bite us, so it's worth mentioning.
+ *
+ * Note that if we used a shared anonymous mapping in the Launcher instead of
+ * mapping /dev/zero private, we wouldn't worry about cop-on-write.  And we
+ * need that to switch the Launcher to processes (away from threads) anyway.
+:*/
 
 /*H:100
  * Hypercalls
@@ -229,17 +268,22 @@ void do_hypercalls(struct lg_cpu *cpu)
 		return;
 	}
 
-	/* The Guest has initialized.
+	/*
+	 * The Guest has initialized.
 	 *
-	 * Look in the hypercall ring for the async hypercalls: */
+	 * Look in the hypercall ring for the async hypercalls:
+	 */
 	do_async_hcalls(cpu);
 
-	/* If we stopped reading the hypercall ring because the Guest did a
+	/*
+	 * If we stopped reading the hypercall ring because the Guest did a
 	 * NOTIFY to the Launcher, we want to return now.  Otherwise we do
-	 * the hypercall. */
+	 * the hypercall.
+	 */
 	if (!cpu->pending_notify) {
 		do_hcall(cpu, cpu->hcall);
-		/* Tricky point: we reset the hcall pointer to mark the
+		/*
+		 * Tricky point: we reset the hcall pointer to mark the
 		 * hypercall as "done".  We use the hcall pointer rather than
 		 * the trap number to indicate a hypercall is pending.
 		 * Normally it doesn't matter: the Guest will run again and
@@ -248,13 +292,16 @@ void do_hypercalls(struct lg_cpu *cpu)
 		 * However, if we are signalled or the Guest sends I/O to the
 		 * Launcher, the run_guest() loop will exit without running the
 		 * Guest.  When it comes back it would try to re-run the
-		 * hypercall.  Finding that bug sucked. */
+		 * hypercall.  Finding that bug sucked.
+		 */
 		cpu->hcall = NULL;
 	}
 }
 
-/* This routine supplies the Guest with time: it's used for wallclock time at
- * initial boot and as a rough time source if the TSC isn't available. */
+/*
+ * This routine supplies the Guest with time: it's used for wallclock time at
+ * initial boot and as a rough time source if the TSC isn't available.
+ */
 void write_timestamp(struct lg_cpu *cpu)
 {
 	struct timespec now;
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 0e9067b0d50..18648180db0 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -1,4 +1,5 @@
-/*P:800 Interrupts (traps) are complicated enough to earn their own file.
+/*P:800
+ * Interrupts (traps) are complicated enough to earn their own file.
  * There are three classes of interrupts:
  *
  * 1) Real hardware interrupts which occur while we're running the Guest,
@@ -10,7 +11,8 @@
  * just like real hardware would deliver them.  Traps from the Guest can be set
  * up to go directly back into the Guest, but sometimes the Host wants to see
  * them first, so we also have a way of "reflecting" them into the Guest as if
- * they had been delivered to it directly. :*/
+ * they had been delivered to it directly.
+:*/
 #include <linux/uaccess.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
@@ -26,8 +28,10 @@ static unsigned long idt_address(u32 lo, u32 hi)
 	return (lo & 0x0000FFFF) | (hi & 0xFFFF0000);
 }
 
-/* The "type" of the interrupt handler is a 4 bit field: we only support a
- * couple of types. */
+/*
+ * The "type" of the interrupt handler is a 4 bit field: we only support a
+ * couple of types.
+ */
 static int idt_type(u32 lo, u32 hi)
 {
 	return (hi >> 8) & 0xF;
@@ -39,8 +43,10 @@ static bool idt_present(u32 lo, u32 hi)
 	return (hi & 0x8000);
 }
 
-/* We need a helper to "push" a value onto the Guest's stack, since that's a
- * big part of what delivering an interrupt does. */
+/*
+ * We need a helper to "push" a value onto the Guest's stack, since that's a
+ * big part of what delivering an interrupt does.
+ */
 static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
 {
 	/* Stack grows upwards: move stack then write value. */
@@ -48,7 +54,8 @@ static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
 	lgwrite(cpu, *gstack, u32, val);
 }
 
-/*H:210 The set_guest_interrupt() routine actually delivers the interrupt or
+/*H:210
+ * The set_guest_interrupt() routine actually delivers the interrupt or
  * trap.  The mechanics of delivering traps and interrupts to the Guest are the
  * same, except some traps have an "error code" which gets pushed onto the
  * stack as well: the caller tells us if this is one.
@@ -59,7 +66,8 @@ static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
  *
  * We set up the stack just like the CPU does for a real interrupt, so it's
  * identical for the Guest (and the standard "iret" instruction will undo
- * it). */
+ * it).
+ */
 static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
 				bool has_err)
 {
@@ -67,20 +75,26 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
 	u32 eflags, ss, irq_enable;
 	unsigned long virtstack;
 
-	/* There are two cases for interrupts: one where the Guest is already
+	/*
+	 * There are two cases for interrupts: one where the Guest is already
 	 * in the kernel, and a more complex one where the Guest is in
-	 * userspace.  We check the privilege level to find out. */
+	 * userspace.  We check the privilege level to find out.
+	 */
 	if ((cpu->regs->ss&0x3) != GUEST_PL) {
-		/* The Guest told us their kernel stack with the SET_STACK
-		 * hypercall: both the virtual address and the segment */
+		/*
+		 * The Guest told us their kernel stack with the SET_STACK
+		 * hypercall: both the virtual address and the segment.
+		 */
 		virtstack = cpu->esp1;
 		ss = cpu->ss1;
 
 		origstack = gstack = guest_pa(cpu, virtstack);
-		/* We push the old stack segment and pointer onto the new
+		/*
+		 * We push the old stack segment and pointer onto the new
 		 * stack: when the Guest does an "iret" back from the interrupt
 		 * handler the CPU will notice they're dropping privilege
-		 * levels and expect these here. */
+		 * levels and expect these here.
+		 */
 		push_guest_stack(cpu, &gstack, cpu->regs->ss);
 		push_guest_stack(cpu, &gstack, cpu->regs->esp);
 	} else {
@@ -91,18 +105,22 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
 		origstack = gstack = guest_pa(cpu, virtstack);
 	}
 
-	/* Remember that we never let the Guest actually disable interrupts, so
+	/*
+	 * Remember that we never let the Guest actually disable interrupts, so
 	 * the "Interrupt Flag" bit is always set.  We copy that bit from the
 	 * Guest's "irq_enabled" field into the eflags word: we saw the Guest
-	 * copy it back in "lguest_iret". */
+	 * copy it back in "lguest_iret".
+	 */
 	eflags = cpu->regs->eflags;
 	if (get_user(irq_enable, &cpu->lg->lguest_data->irq_enabled) == 0
 	    && !(irq_enable & X86_EFLAGS_IF))
 		eflags &= ~X86_EFLAGS_IF;
 
-	/* An interrupt is expected to push three things on the stack: the old
+	/*
+	 * An interrupt is expected to push three things on the stack: the old
 	 * "eflags" word, the old code segment, and the old instruction
-	 * pointer. */
+	 * pointer.
+	 */
 	push_guest_stack(cpu, &gstack, eflags);
 	push_guest_stack(cpu, &gstack, cpu->regs->cs);
 	push_guest_stack(cpu, &gstack, cpu->regs->eip);
@@ -111,15 +129,19 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
 	if (has_err)
 		push_guest_stack(cpu, &gstack, cpu->regs->errcode);
 
-	/* Now we've pushed all the old state, we change the stack, the code
-	 * segment and the address to execute. */
+	/*
+	 * Now we've pushed all the old state, we change the stack, the code
+	 * segment and the address to execute.
+	 */
 	cpu->regs->ss = ss;
 	cpu->regs->esp = virtstack + (gstack - origstack);
 	cpu->regs->cs = (__KERNEL_CS|GUEST_PL);
 	cpu->regs->eip = idt_address(lo, hi);
 
-	/* There are two kinds of interrupt handlers: 0xE is an "interrupt
-	 * gate" which expects interrupts to be disabled on entry. */
+	/*
+	 * There are two kinds of interrupt handlers: 0xE is an "interrupt
+	 * gate" which expects interrupts to be disabled on entry.
+	 */
 	if (idt_type(lo, hi) == 0xE)
 		if (put_user(0, &cpu->lg->lguest_data->irq_enabled))
 			kill_guest(cpu, "Disabling interrupts");
@@ -130,7 +152,8 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
  *
  * interrupt_pending() returns the first pending interrupt which isn't blocked
  * by the Guest.  It is called before every entry to the Guest, and just before
- * we go to sleep when the Guest has halted itself. */
+ * we go to sleep when the Guest has halted itself.
+ */
 unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
 {
 	unsigned int irq;
@@ -140,8 +163,10 @@ unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
 	if (!cpu->lg->lguest_data)
 		return LGUEST_IRQS;
 
-	/* Take our "irqs_pending" array and remove any interrupts the Guest
-	 * wants blocked: the result ends up in "blk". */
+	/*
+	 * Take our "irqs_pending" array and remove any interrupts the Guest
+	 * wants blocked: the result ends up in "blk".
+	 */
 	if (copy_from_user(&blk, cpu->lg->lguest_data->blocked_interrupts,
 			   sizeof(blk)))
 		return LGUEST_IRQS;
@@ -154,16 +179,20 @@ unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
 	return irq;
 }
 
-/* This actually diverts the Guest to running an interrupt handler, once an
- * interrupt has been identified by interrupt_pending(). */
+/*
+ * This actually diverts the Guest to running an interrupt handler, once an
+ * interrupt has been identified by interrupt_pending().
+ */
 void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
 {
 	struct desc_struct *idt;
 
 	BUG_ON(irq >= LGUEST_IRQS);
 
-	/* They may be in the middle of an iret, where they asked us never to
-	 * deliver interrupts. */
+	/*
+	 * They may be in the middle of an iret, where they asked us never to
+	 * deliver interrupts.
+	 */
 	if (cpu->regs->eip >= cpu->lg->noirq_start &&
 	   (cpu->regs->eip < cpu->lg->noirq_end))
 		return;
@@ -187,29 +216,37 @@ void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
 		}
 	}
 
-	/* Look at the IDT entry the Guest gave us for this interrupt.  The
+	/*
+	 * Look at the IDT entry the Guest gave us for this interrupt.  The
 	 * first 32 (FIRST_EXTERNAL_VECTOR) entries are for traps, so we skip
-	 * over them. */
+	 * over them.
+	 */
 	idt = &cpu->arch.idt[FIRST_EXTERNAL_VECTOR+irq];
 	/* If they don't have a handler (yet?), we just ignore it */
 	if (idt_present(idt->a, idt->b)) {
 		/* OK, mark it no longer pending and deliver it. */
 		clear_bit(irq, cpu->irqs_pending);
-		/* set_guest_interrupt() takes the interrupt descriptor and a
+		/*
+		 * set_guest_interrupt() takes the interrupt descriptor and a
 		 * flag to say whether this interrupt pushes an error code onto
-		 * the stack as well: virtual interrupts never do. */
+		 * the stack as well: virtual interrupts never do.
+		 */
 		set_guest_interrupt(cpu, idt->a, idt->b, false);
 	}
 
-	/* Every time we deliver an interrupt, we update the timestamp in the
+	/*
+	 * Every time we deliver an interrupt, we update the timestamp in the
 	 * Guest's lguest_data struct.  It would be better for the Guest if we
 	 * did this more often, but it can actually be quite slow: doing it
 	 * here is a compromise which means at least it gets updated every
-	 * timer interrupt. */
+	 * timer interrupt.
+	 */
 	write_timestamp(cpu);
 
-	/* If there are no other interrupts we want to deliver, clear
-	 * the pending flag. */
+	/*
+	 * If there are no other interrupts we want to deliver, clear
+	 * the pending flag.
+	 */
 	if (!more)
 		put_user(0, &cpu->lg->lguest_data->irq_pending);
 }
@@ -217,24 +254,29 @@ void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
 /* And this is the routine when we want to set an interrupt for the Guest. */
 void set_interrupt(struct lg_cpu *cpu, unsigned int irq)
 {
-	/* Next time the Guest runs, the core code will see if it can deliver
-	 * this interrupt. */
+	/*
+	 * Next time the Guest runs, the core code will see if it can deliver
+	 * this interrupt.
+	 */
 	set_bit(irq, cpu->irqs_pending);
 
-	/* Make sure it sees it; it might be asleep (eg. halted), or
-	 * running the Guest right now, in which case kick_process()
-	 * will knock it out. */
+	/*
+	 * Make sure it sees it; it might be asleep (eg. halted), or running
+	 * the Guest right now, in which case kick_process() will knock it out.
+	 */
 	if (!wake_up_process(cpu->tsk))
 		kick_process(cpu->tsk);
 }
 /*:*/
 
-/* Linux uses trap 128 for system calls.  Plan9 uses 64, and Ron Minnich sent
+/*
+ * Linux uses trap 128 for system calls.  Plan9 uses 64, and Ron Minnich sent
  * me a patch, so we support that too.  It'd be a big step for lguest if half
  * the Plan 9 user base were to start using it.
  *
  * Actually now I think of it, it's possible that Ron *is* half the Plan 9
- * userbase.  Oh well. */
+ * userbase.  Oh well.
+ */
 static bool could_be_syscall(unsigned int num)
 {
 	/* Normal Linux SYSCALL_VECTOR or reserved vector? */
@@ -274,9 +316,11 @@ void free_interrupts(void)
 		clear_bit(syscall_vector, used_vectors);
 }
 
-/*H:220 Now we've got the routines to deliver interrupts, delivering traps like
+/*H:220
+ * Now we've got the routines to deliver interrupts, delivering traps like
  * page fault is easy.  The only trick is that Intel decided that some traps
- * should have error codes: */
+ * should have error codes:
+ */
 static bool has_err(unsigned int trap)
 {
 	return (trap == 8 || (trap >= 10 && trap <= 14) || trap == 17);
@@ -285,13 +329,17 @@ static bool has_err(unsigned int trap)
 /* deliver_trap() returns true if it could deliver the trap. */
 bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
 {
-	/* Trap numbers are always 8 bit, but we set an impossible trap number
-	 * for traps inside the Switcher, so check that here. */
+	/*
+	 * Trap numbers are always 8 bit, but we set an impossible trap number
+	 * for traps inside the Switcher, so check that here.
+	 */
 	if (num >= ARRAY_SIZE(cpu->arch.idt))
 		return false;
 
-	/* Early on the Guest hasn't set the IDT entries (or maybe it put a
-	 * bogus one in): if we fail here, the Guest will be killed. */
+	/*
+	 * Early on the Guest hasn't set the IDT entries (or maybe it put a
+	 * bogus one in): if we fail here, the Guest will be killed.
+	 */
 	if (!idt_present(cpu->arch.idt[num].a, cpu->arch.idt[num].b))
 		return false;
 	set_guest_interrupt(cpu, cpu->arch.idt[num].a,
@@ -299,7 +347,8 @@ bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
 	return true;
 }
 
-/*H:250 Here's the hard part: returning to the Host every time a trap happens
+/*H:250
+ * Here's the hard part: returning to the Host every time a trap happens
  * and then calling deliver_trap() and re-entering the Guest is slow.
  * Particularly because Guest userspace system calls are traps (usually trap
  * 128).
@@ -311,69 +360,87 @@ bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
  * the other hypervisors would beat it up at lunchtime.
  *
  * This routine indicates if a particular trap number could be delivered
- * directly. */
+ * directly.
+ */
 static bool direct_trap(unsigned int num)
 {
-	/* Hardware interrupts don't go to the Guest at all (except system
-	 * call). */
+	/*
+	 * Hardware interrupts don't go to the Guest at all (except system
+	 * call).
+	 */
 	if (num >= FIRST_EXTERNAL_VECTOR && !could_be_syscall(num))
 		return false;
 
-	/* The Host needs to see page faults (for shadow paging and to save the
+	/*
+	 * The Host needs to see page faults (for shadow paging and to save the
 	 * fault address), general protection faults (in/out emulation) and
 	 * device not available (TS handling), invalid opcode fault (kvm hcall),
-	 * and of course, the hypercall trap. */
+	 * and of course, the hypercall trap.
+	 */
 	return num != 14 && num != 13 && num != 7 &&
 			num != 6 && num != LGUEST_TRAP_ENTRY;
 }
 /*:*/
 
-/*M:005 The Guest has the ability to turn its interrupt gates into trap gates,
+/*M:005
+ * The Guest has the ability to turn its interrupt gates into trap gates,
  * if it is careful.  The Host will let trap gates can go directly to the
  * Guest, but the Guest needs the interrupts atomically disabled for an
  * interrupt gate.  It can do this by pointing the trap gate at instructions
- * within noirq_start and noirq_end, where it can safely disable interrupts. */
+ * within noirq_start and noirq_end, where it can safely disable interrupts.
+ */
 
-/*M:006 The Guests do not use the sysenter (fast system call) instruction,
+/*M:006
+ * The Guests do not use the sysenter (fast system call) instruction,
  * because it's hardcoded to enter privilege level 0 and so can't go direct.
  * It's about twice as fast as the older "int 0x80" system call, so it might
  * still be worthwhile to handle it in the Switcher and lcall down to the
  * Guest.  The sysenter semantics are hairy tho: search for that keyword in
- * entry.S :*/
+ * entry.S
+:*/
 
-/*H:260 When we make traps go directly into the Guest, we need to make sure
+/*H:260
+ * When we make traps go directly into the Guest, we need to make sure
  * the kernel stack is valid (ie. mapped in the page tables).  Otherwise, the
  * CPU trying to deliver the trap will fault while trying to push the interrupt
  * words on the stack: this is called a double fault, and it forces us to kill
  * the Guest.
  *
- * Which is deeply unfair, because (literally!) it wasn't the Guests' fault. */
+ * Which is deeply unfair, because (literally!) it wasn't the Guests' fault.
+ */
 void pin_stack_pages(struct lg_cpu *cpu)
 {
 	unsigned int i;
 
-	/* Depending on the CONFIG_4KSTACKS option, the Guest can have one or
-	 * two pages of stack space. */
+	/*
+	 * Depending on the CONFIG_4KSTACKS option, the Guest can have one or
+	 * two pages of stack space.
+	 */
 	for (i = 0; i < cpu->lg->stack_pages; i++)
-		/* The stack grows *upwards*, so the address we're given is the
+		/*
+		 * The stack grows *upwards*, so the address we're given is the
 		 * start of the page after the kernel stack.  Subtract one to
 		 * get back onto the first stack page, and keep subtracting to
-		 * get to the rest of the stack pages. */
+		 * get to the rest of the stack pages.
+		 */
 		pin_page(cpu, cpu->esp1 - 1 - i * PAGE_SIZE);
 }
 
-/* Direct traps also mean that we need to know whenever the Guest wants to use
+/*
+ * Direct traps also mean that we need to know whenever the Guest wants to use
  * a different kernel stack, so we can change the IDT entries to use that
  * stack.  The IDT entries expect a virtual address, so unlike most addresses
  * the Guest gives us, the "esp" (stack pointer) value here is virtual, not
  * physical.
  *
  * In Linux each process has its own kernel stack, so this happens a lot: we
- * change stacks on each context switch. */
+ * change stacks on each context switch.
+ */
 void guest_set_stack(struct lg_cpu *cpu, u32 seg, u32 esp, unsigned int pages)
 {
-	/* You are not allowed have a stack segment with privilege level 0: bad
-	 * Guest! */
+	/*
+	 * You're not allowed a stack segment with privilege level 0: bad Guest!
+	 */
 	if ((seg & 0x3) != GUEST_PL)
 		kill_guest(cpu, "bad stack segment %i", seg);
 	/* We only expect one or two stack pages. */
@@ -387,11 +454,15 @@ void guest_set_stack(struct lg_cpu *cpu, u32 seg, u32 esp, unsigned int pages)
 	pin_stack_pages(cpu);
 }
 
-/* All this reference to mapping stacks leads us neatly into the other complex
- * part of the Host: page table handling. */
+/*
+ * All this reference to mapping stacks leads us neatly into the other complex
+ * part of the Host: page table handling.
+ */
 
-/*H:235 This is the routine which actually checks the Guest's IDT entry and
- * transfers it into the entry in "struct lguest": */
+/*H:235
+ * This is the routine which actually checks the Guest's IDT entry and
+ * transfers it into the entry in "struct lguest":
+ */
 static void set_trap(struct lg_cpu *cpu, struct desc_struct *trap,
 		     unsigned int num, u32 lo, u32 hi)
 {
@@ -407,30 +478,38 @@ static void set_trap(struct lg_cpu *cpu, struct desc_struct *trap,
 	if (type != 0xE && type != 0xF)
 		kill_guest(cpu, "bad IDT type %i", type);
 
-	/* We only copy the handler address, present bit, privilege level and
+	/*
+	 * We only copy the handler address, present bit, privilege level and
 	 * type.  The privilege level controls where the trap can be triggered
 	 * manually with an "int" instruction.  This is usually GUEST_PL,
-	 * except for system calls which userspace can use. */
+	 * except for system calls which userspace can use.
+	 */
 	trap->a = ((__KERNEL_CS|GUEST_PL)<<16) | (lo&0x0000FFFF);
 	trap->b = (hi&0xFFFFEF00);
 }
 
-/*H:230 While we're here, dealing with delivering traps and interrupts to the
+/*H:230
+ * While we're here, dealing with delivering traps and interrupts to the
  * Guest, we might as well complete the picture: how the Guest tells us where
  * it wants them to go.  This would be simple, except making traps fast
  * requires some tricks.
  *
  * We saw the Guest setting Interrupt Descriptor Table (IDT) entries with the
- * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here. */
+ * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here.
+ */
 void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi)
 {
-	/* Guest never handles: NMI, doublefault, spurious interrupt or
-	 * hypercall.  We ignore when it tries to set them. */
+	/*
+	 * Guest never handles: NMI, doublefault, spurious interrupt or
+	 * hypercall.  We ignore when it tries to set them.
+	 */
 	if (num == 2 || num == 8 || num == 15 || num == LGUEST_TRAP_ENTRY)
 		return;
 
-	/* Mark the IDT as changed: next time the Guest runs we'll know we have
-	 * to copy this again. */
+	/*
+	 * Mark the IDT as changed: next time the Guest runs we'll know we have
+	 * to copy this again.
+	 */
 	cpu->changed |= CHANGED_IDT;
 
 	/* Check that the Guest doesn't try to step outside the bounds. */
@@ -440,9 +519,11 @@ void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi)
 		set_trap(cpu, &cpu->arch.idt[num], num, lo, hi);
 }
 
-/* The default entry for each interrupt points into the Switcher routines which
+/*
+ * The default entry for each interrupt points into the Switcher routines which
  * simply return to the Host.  The run_guest() loop will then call
- * deliver_trap() to bounce it back into the Guest. */
+ * deliver_trap() to bounce it back into the Guest.
+ */
 static void default_idt_entry(struct desc_struct *idt,
 			      int trap,
 			      const unsigned long handler,
@@ -451,13 +532,17 @@ static void default_idt_entry(struct desc_struct *idt,
 	/* A present interrupt gate. */
 	u32 flags = 0x8e00;
 
-	/* Set the privilege level on the entry for the hypercall: this allows
-	 * the Guest to use the "int" instruction to trigger it. */
+	/*
+	 * Set the privilege level on the entry for the hypercall: this allows
+	 * the Guest to use the "int" instruction to trigger it.
+	 */
 	if (trap == LGUEST_TRAP_ENTRY)
 		flags |= (GUEST_PL << 13);
 	else if (base)
-		/* Copy priv. level from what Guest asked for.  This allows
-		 * debug (int 3) traps from Guest userspace, for example. */
+		/*
+		 * Copy privilege level from what Guest asked for.  This allows
+		 * debug (int 3) traps from Guest userspace, for example.
+		 */
 		flags |= (base->b & 0x6000);
 
 	/* Now pack it into the IDT entry in its weird format. */
@@ -475,16 +560,20 @@ void setup_default_idt_entries(struct lguest_ro_state *state,
 		default_idt_entry(&state->guest_idt[i], i, def[i], NULL);
 }
 
-/*H:240 We don't use the IDT entries in the "struct lguest" directly, instead
+/*H:240
+ * We don't use the IDT entries in the "struct lguest" directly, instead
  * we copy them into the IDT which we've set up for Guests on this CPU, just
- * before we run the Guest.  This routine does that copy. */
+ * before we run the Guest.  This routine does that copy.
+ */
 void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
 		const unsigned long *def)
 {
 	unsigned int i;
 
-	/* We can simply copy the direct traps, otherwise we use the default
-	 * ones in the Switcher: they will return to the Host. */
+	/*
+	 * We can simply copy the direct traps, otherwise we use the default
+	 * ones in the Switcher: they will return to the Host.
+	 */
 	for (i = 0; i < ARRAY_SIZE(cpu->arch.idt); i++) {
 		const struct desc_struct *gidt = &cpu->arch.idt[i];
 
@@ -492,14 +581,16 @@ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
 		if (!direct_trap(i))
 			continue;
 
-		/* Only trap gates (type 15) can go direct to the Guest.
+		/*
+		 * Only trap gates (type 15) can go direct to the Guest.
 		 * Interrupt gates (type 14) disable interrupts as they are
 		 * entered, which we never let the Guest do.  Not present
 		 * entries (type 0x0) also can't go direct, of course.
 		 *
 		 * If it can't go direct, we still need to copy the priv. level:
 		 * they might want to give userspace access to a software
-		 * interrupt. */
+		 * interrupt.
+		 */
 		if (idt_type(gidt->a, gidt->b) == 0xF)
 			idt[i] = *gidt;
 		else
@@ -518,7 +609,8 @@ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
  * the next timer interrupt (in nanoseconds).  We use the high-resolution timer
  * infrastructure to set a callback at that time.
  *
- * 0 means "turn off the clock". */
+ * 0 means "turn off the clock".
+ */
 void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta)
 {
 	ktime_t expires;
@@ -529,9 +621,11 @@ void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta)
 		return;
 	}
 
-	/* We use wallclock time here, so the Guest might not be running for
+	/*
+	 * We use wallclock time here, so the Guest might not be running for
 	 * all the time between now and the timer interrupt it asked for.  This
-	 * is almost always the right thing to do. */
+	 * is almost always the right thing to do.
+	 */
 	expires = ktime_add_ns(ktime_get_real(), delta);
 	hrtimer_start(&cpu->hrt, expires, HRTIMER_MODE_ABS);
 }
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index d4e8979735c..bc28745d05a 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -16,15 +16,13 @@
 void free_pagetables(void);
 int init_pagetables(struct page **switcher_page, unsigned int pages);
 
-struct pgdir
-{
+struct pgdir {
 	unsigned long gpgdir;
 	pgd_t *pgdir;
 };
 
 /* We have two pages shared with guests, per cpu.  */
-struct lguest_pages
-{
+struct lguest_pages {
 	/* This is the stack page mapped rw in guest */
 	char spare[PAGE_SIZE - sizeof(struct lguest_regs)];
 	struct lguest_regs regs;
@@ -38,8 +36,6 @@ struct lguest_pages
 #define CHANGED_GDT_TLS		4 /* Actually a subset of CHANGED_GDT */
 #define CHANGED_ALL	        3
 
-struct lguest;
-
 struct lg_cpu {
 	unsigned int id;
 	struct lguest *lg;
@@ -56,13 +52,13 @@ struct lg_cpu {
 
 	unsigned long pending_notify; /* pfn from LHCALL_NOTIFY */
 
-	/* At end of a page shared mapped over lguest_pages in guest.  */
+	/* At end of a page shared mapped over lguest_pages in guest. */
 	unsigned long regs_page;
 	struct lguest_regs *regs;
 
 	struct lguest_pages *last_pages;
 
-	int cpu_pgd; /* which pgd this cpu is currently using */
+	int cpu_pgd; /* Which pgd this cpu is currently using */
 
 	/* If a hypercall was asked for, this points to the arguments. */
 	struct hcall_args *hcall;
@@ -82,7 +78,7 @@ struct lg_cpu {
 
 struct lg_eventfd {
 	unsigned long addr;
-	struct file *event;
+	struct eventfd_ctx *event;
 };
 
 struct lg_eventfd_map {
@@ -91,15 +87,17 @@ struct lg_eventfd_map {
 };
 
 /* The private info the thread maintains about the guest. */
-struct lguest
-{
+struct lguest {
 	struct lguest_data __user *lguest_data;
 	struct lg_cpu cpus[NR_CPUS];
 	unsigned int nr_cpus;
 
 	u32 pfn_limit;
-	/* This provides the offset to the base of guest-physical
-	 * memory in the Launcher. */
+
+	/*
+	 * This provides the offset to the base of guest-physical memory in the
+	 * Launcher.
+	 */
 	void __user *mem_base;
 	unsigned long kernel_address;
 
@@ -124,11 +122,13 @@ bool lguest_address_ok(const struct lguest *lg,
 void __lgread(struct lg_cpu *, void *, unsigned long, unsigned);
 void __lgwrite(struct lg_cpu *, unsigned long, const void *, unsigned);
 
-/*H:035 Using memory-copy operations like that is usually inconvient, so we
+/*H:035
+ * Using memory-copy operations like that is usually inconvient, so we
  * have the following helper macros which read and write a specific type (often
  * an unsigned long).
  *
- * This reads into a variable of the given type then returns that. */
+ * This reads into a variable of the given type then returns that.
+ */
 #define lgread(cpu, addr, type)						\
 	({ type _v; __lgread((cpu), &_v, (addr), sizeof(_v)); _v; })
 
@@ -142,9 +142,11 @@ void __lgwrite(struct lg_cpu *, unsigned long, const void *, unsigned);
 
 int run_guest(struct lg_cpu *cpu, unsigned long __user *user);
 
-/* Helper macros to obtain the first 12 or the last 20 bits, this is only the
+/*
+ * Helper macros to obtain the first 12 or the last 20 bits, this is only the
  * first step in the migration to the kernel types.  pte_pfn is already defined
- * in the kernel. */
+ * in the kernel.
+ */
 #define pgd_flags(x)	(pgd_val(x) & ~PAGE_MASK)
 #define pgd_pfn(x)	(pgd_val(x) >> PAGE_SHIFT)
 #define pmd_flags(x)    (pmd_val(x) & ~PAGE_MASK)
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index e082cdac88b..b6200bc39b5 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -1,10 +1,12 @@
-/*P:050 Lguest guests use a very simple method to describe devices.  It's a
+/*P:050
+ * Lguest guests use a very simple method to describe devices.  It's a
  * series of device descriptors contained just above the top of normal Guest
  * memory.
  *
  * We use the standard "virtio" device infrastructure, which provides us with a
  * console, a network and a block driver.  Each one expects some configuration
- * information and a "virtqueue" or two to send and receive data. :*/
+ * information and a "virtqueue" or two to send and receive data.
+:*/
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <linux/lguest_launcher.h>
@@ -20,8 +22,10 @@
 /* The pointer to our (page) of device descriptions. */
 static void *lguest_devices;
 
-/* For Guests, device memory can be used as normal memory, so we cast away the
- * __iomem to quieten sparse. */
+/*
+ * For Guests, device memory can be used as normal memory, so we cast away the
+ * __iomem to quieten sparse.
+ */
 static inline void *lguest_map(unsigned long phys_addr, unsigned long pages)
 {
 	return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages);
@@ -32,8 +36,10 @@ static inline void lguest_unmap(void *addr)
 	iounmap((__force void __iomem *)addr);
 }
 
-/*D:100 Each lguest device is just a virtio device plus a pointer to its entry
- * in the lguest_devices page. */
+/*D:100
+ * Each lguest device is just a virtio device plus a pointer to its entry
+ * in the lguest_devices page.
+ */
 struct lguest_device {
 	struct virtio_device vdev;
 
@@ -41,9 +47,11 @@ struct lguest_device {
 	struct lguest_device_desc *desc;
 };
 
-/* Since the virtio infrastructure hands us a pointer to the virtio_device all
+/*
+ * Since the virtio infrastructure hands us a pointer to the virtio_device all
  * the time, it helps to have a curt macro to get a pointer to the struct
- * lguest_device it's enclosed in.  */
+ * lguest_device it's enclosed in.
+ */
 #define to_lgdev(vd) container_of(vd, struct lguest_device, vdev)
 
 /*D:130
@@ -55,7 +63,8 @@ struct lguest_device {
  * the driver will look at them during setup.
  *
  * A convenient routine to return the device's virtqueue config array:
- * immediately after the descriptor. */
+ * immediately after the descriptor.
+ */
 static struct lguest_vqconfig *lg_vq(const struct lguest_device_desc *desc)
 {
 	return (void *)(desc + 1);
@@ -98,10 +107,12 @@ static u32 lg_get_features(struct virtio_device *vdev)
 	return features;
 }
 
-/* The virtio core takes the features the Host offers, and copies the
- * ones supported by the driver into the vdev->features array.  Once
- * that's all sorted out, this routine is called so we can tell the
- * Host which features we understand and accept. */
+/*
+ * The virtio core takes the features the Host offers, and copies the ones
+ * supported by the driver into the vdev->features array.  Once that's all
+ * sorted out, this routine is called so we can tell the Host which features we
+ * understand and accept.
+ */
 static void lg_finalize_features(struct virtio_device *vdev)
 {
 	unsigned int i, bits;
@@ -112,10 +123,11 @@ static void lg_finalize_features(struct virtio_device *vdev)
 	/* Give virtio_ring a chance to accept features. */
 	vring_transport_features(vdev);
 
-	/* The vdev->feature array is a Linux bitmask: this isn't the
-	 * same as a the simple array of bits used by lguest devices
-	 * for features.  So we do this slow, manual conversion which is
-	 * completely general. */
+	/*
+	 * The vdev->feature array is a Linux bitmask: this isn't the same as a
+	 * the simple array of bits used by lguest devices for features.  So we
+	 * do this slow, manual conversion which is completely general.
+	 */
 	memset(out_features, 0, desc->feature_len);
 	bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8;
 	for (i = 0; i < bits; i++) {
@@ -146,15 +158,19 @@ static void lg_set(struct virtio_device *vdev, unsigned int offset,
 	memcpy(lg_config(desc) + offset, buf, len);
 }
 
-/* The operations to get and set the status word just access the status field
- * of the device descriptor. */
+/*
+ * The operations to get and set the status word just access the status field
+ * of the device descriptor.
+ */
 static u8 lg_get_status(struct virtio_device *vdev)
 {
 	return to_lgdev(vdev)->desc->status;
 }
 
-/* To notify on status updates, we (ab)use the NOTIFY hypercall, with the
- * descriptor address of the device.  A zero status means "reset". */
+/*
+ * To notify on status updates, we (ab)use the NOTIFY hypercall, with the
+ * descriptor address of the device.  A zero status means "reset".
+ */
 static void set_status(struct virtio_device *vdev, u8 status)
 {
 	unsigned long offset = (void *)to_lgdev(vdev)->desc - lguest_devices;
@@ -191,8 +207,7 @@ static void lg_reset(struct virtio_device *vdev)
  */
 
 /*D:140 This is the information we remember about each virtqueue. */
-struct lguest_vq_info
-{
+struct lguest_vq_info {
 	/* A copy of the information contained in the device config. */
 	struct lguest_vqconfig config;
 
@@ -200,13 +215,17 @@ struct lguest_vq_info
 	void *pages;
 };
 
-/* When the virtio_ring code wants to prod the Host, it calls us here and we
+/*
+ * When the virtio_ring code wants to prod the Host, it calls us here and we
  * make a hypercall.  We hand the physical address of the virtqueue so the Host
- * knows which virtqueue we're talking about. */
+ * knows which virtqueue we're talking about.
+ */
 static void lg_notify(struct virtqueue *vq)
 {
-	/* We store our virtqueue information in the "priv" pointer of the
-	 * virtqueue structure. */
+	/*
+	 * We store our virtqueue information in the "priv" pointer of the
+	 * virtqueue structure.
+	 */
 	struct lguest_vq_info *lvq = vq->priv;
 
 	kvm_hypercall1(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT);
@@ -215,7 +234,8 @@ static void lg_notify(struct virtqueue *vq)
 /* An extern declaration inside a C file is bad form.  Don't do it. */
 extern void lguest_setup_irq(unsigned int irq);
 
-/* This routine finds the first virtqueue described in the configuration of
+/*
+ * This routine finds the Nth virtqueue described in the configuration of
  * this device and sets it up.
  *
  * This is kind of an ugly duckling.  It'd be nicer to have a standard
@@ -223,9 +243,7 @@ extern void lguest_setup_irq(unsigned int irq);
  * everyone wants to do it differently.  The KVM coders want the Guest to
  * allocate its own pages and tell the Host where they are, but for lguest it's
  * simpler for the Host to simply tell us where the pages are.
- *
- * So we provide drivers with a "find the Nth virtqueue and set it up"
- * function. */
+ */
 static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 				    unsigned index,
 				    void (*callback)(struct virtqueue *vq),
@@ -244,9 +262,11 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 	if (!lvq)
 		return ERR_PTR(-ENOMEM);
 
-	/* Make a copy of the "struct lguest_vqconfig" entry, which sits after
+	/*
+	 * Make a copy of the "struct lguest_vqconfig" entry, which sits after
 	 * the descriptor.  We need a copy because the config space might not
-	 * be aligned correctly. */
+	 * be aligned correctly.
+	 */
 	memcpy(&lvq->config, lg_vq(ldev->desc)+index, sizeof(lvq->config));
 
 	printk("Mapping virtqueue %i addr %lx\n", index,
@@ -261,8 +281,10 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 		goto free_lvq;
 	}
 
-	/* OK, tell virtio_ring.c to set up a virtqueue now we know its size
-	 * and we've got a pointer to its pages. */
+	/*
+	 * OK, tell virtio_ring.c to set up a virtqueue now we know its size
+	 * and we've got a pointer to its pages.
+	 */
 	vq = vring_new_virtqueue(lvq->config.num, LGUEST_VRING_ALIGN,
 				 vdev, lvq->pages, lg_notify, callback, name);
 	if (!vq) {
@@ -273,18 +295,23 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 	/* Make sure the interrupt is allocated. */
 	lguest_setup_irq(lvq->config.irq);
 
-	/* Tell the interrupt for this virtqueue to go to the virtio_ring
-	 * interrupt handler. */
-	/* FIXME: We used to have a flag for the Host to tell us we could use
+	/*
+	 * Tell the interrupt for this virtqueue to go to the virtio_ring
+	 * interrupt handler.
+	 *
+	 * FIXME: We used to have a flag for the Host to tell us we could use
 	 * the interrupt as a source of randomness: it'd be nice to have that
-	 * back.. */
+	 * back.
+	 */
 	err = request_irq(lvq->config.irq, vring_interrupt, IRQF_SHARED,
 			  dev_name(&vdev->dev), vq);
 	if (err)
 		goto destroy_vring;
 
-	/* Last of all we hook up our 'struct lguest_vq_info" to the
-	 * virtqueue's priv pointer. */
+	/*
+	 * Last of all we hook up our 'struct lguest_vq_info" to the
+	 * virtqueue's priv pointer.
+	 */
 	vq->priv = lvq;
 	return vq;
 
@@ -358,11 +385,14 @@ static struct virtio_config_ops lguest_config_ops = {
 	.del_vqs = lg_del_vqs,
 };
 
-/* The root device for the lguest virtio devices.  This makes them appear as
- * /sys/devices/lguest/0,1,2 not /sys/devices/0,1,2. */
+/*
+ * The root device for the lguest virtio devices.  This makes them appear as
+ * /sys/devices/lguest/0,1,2 not /sys/devices/0,1,2.
+ */
 static struct device *lguest_root;
 
-/*D:120 This is the core of the lguest bus: actually adding a new device.
+/*D:120
+ * This is the core of the lguest bus: actually adding a new device.
  * It's a separate function because it's neater that way, and because an
  * earlier version of the code supported hotplug and unplug.  They were removed
  * early on because they were never used.
@@ -371,14 +401,14 @@ static struct device *lguest_root;
  *
  * It's worth reading this carefully: we start with a pointer to the new device
  * descriptor in the "lguest_devices" page, and the offset into the device
- * descriptor page so we can uniquely identify it if things go badly wrong. */
+ * descriptor page so we can uniquely identify it if things go badly wrong.
+ */
 static void add_lguest_device(struct lguest_device_desc *d,
 			      unsigned int offset)
 {
 	struct lguest_device *ldev;
 
-	/* Start with zeroed memory; Linux's device layer seems to count on
-	 * it. */
+	/* Start with zeroed memory; Linux's device layer counts on it. */
 	ldev = kzalloc(sizeof(*ldev), GFP_KERNEL);
 	if (!ldev) {
 		printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n",
@@ -388,17 +418,25 @@ static void add_lguest_device(struct lguest_device_desc *d,
 
 	/* This devices' parent is the lguest/ dir. */
 	ldev->vdev.dev.parent = lguest_root;
-	/* We have a unique device index thanks to the dev_index counter. */
+	/*
+	 * The device type comes straight from the descriptor.  There's also a
+	 * device vendor field in the virtio_device struct, which we leave as
+	 * 0.
+	 */
 	ldev->vdev.id.device = d->type;
-	/* We have a simple set of routines for querying the device's
-	 * configuration information and setting its status. */
+	/*
+	 * We have a simple set of routines for querying the device's
+	 * configuration information and setting its status.
+	 */
 	ldev->vdev.config = &lguest_config_ops;
 	/* And we remember the device's descriptor for lguest_config_ops. */
 	ldev->desc = d;
 
-	/* register_virtio_device() sets up the generic fields for the struct
+	/*
+	 * register_virtio_device() sets up the generic fields for the struct
 	 * virtio_device and calls device_register().  This makes the bus
-	 * infrastructure look for a matching driver. */
+	 * infrastructure look for a matching driver.
+	 */
 	if (register_virtio_device(&ldev->vdev) != 0) {
 		printk(KERN_ERR "Failed to register lguest dev %u type %u\n",
 		       offset, d->type);
@@ -406,8 +444,10 @@ static void add_lguest_device(struct lguest_device_desc *d,
 	}
 }
 
-/*D:110 scan_devices() simply iterates through the device page.  The type 0 is
- * reserved to mean "end of devices". */
+/*D:110
+ * scan_devices() simply iterates through the device page.  The type 0 is
+ * reserved to mean "end of devices".
+ */
 static void scan_devices(void)
 {
 	unsigned int i;
@@ -426,7 +466,8 @@ static void scan_devices(void)
 	}
 }
 
-/*D:105 Fairly early in boot, lguest_devices_init() is called to set up the
+/*D:105
+ * Fairly early in boot, lguest_devices_init() is called to set up the
  * lguest device infrastructure.  We check that we are a Guest by checking
  * pv_info.name: there are other ways of checking, but this seems most
  * obvious to me.
@@ -437,7 +478,8 @@ static void scan_devices(void)
  * correct sysfs incantation).
  *
  * Finally we call scan_devices() which adds all the devices found in the
- * lguest_devices page. */
+ * lguest_devices page.
+ */
 static int __init lguest_devices_init(void)
 {
 	if (strcmp(pv_info.name, "lguest") != 0)
@@ -456,11 +498,13 @@ static int __init lguest_devices_init(void)
 /* We do this after core stuff, but before the drivers. */
 postcore_initcall(lguest_devices_init);
 
-/*D:150 At this point in the journey we used to now wade through the lguest
+/*D:150
+ * At this point in the journey we used to now wade through the lguest
  * devices themselves: net, block and console.  Since they're all now virtio
  * devices rather than lguest-specific, I've decided to ignore them.  Mostly,
  * they're kind of boring.  But this does mean you'll never experience the
  * thrill of reading the forbidden love scene buried deep in the block driver.
  *
  * "make Launcher" beckons, where we answer questions like "Where do Guests
- * come from?", and "What do you do when someone asks for optimization?". */
+ * come from?", and "What do you do when someone asks for optimization?".
+ */
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 32e29712105..b4d3f7ca554 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -1,8 +1,9 @@
 /*P:200 This contains all the /dev/lguest code, whereby the userspace launcher
  * controls and communicates with the Guest.  For example, the first write will
- * tell us the Guest's memory layout, pagetable, entry point and kernel address
- * offset.  A read will run the Guest until something happens, such as a signal
- * or the Guest doing a NOTIFY out to the Launcher. :*/
+ * tell us the Guest's memory layout and entry point.  A read will run the
+ * Guest until something happens, such as a signal or the Guest doing a NOTIFY
+ * out to the Launcher.
+:*/
 #include <linux/uaccess.h>
 #include <linux/miscdevice.h>
 #include <linux/fs.h>
@@ -11,14 +12,41 @@
 #include <linux/file.h>
 #include "lg.h"
 
+/*L:056
+ * Before we move on, let's jump ahead and look at what the kernel does when
+ * it needs to look up the eventfds.  That will complete our picture of how we
+ * use RCU.
+ *
+ * The notification value is in cpu->pending_notify: we return true if it went
+ * to an eventfd.
+ */
 bool send_notify_to_eventfd(struct lg_cpu *cpu)
 {
 	unsigned int i;
 	struct lg_eventfd_map *map;
 
-	/* lg->eventfds is RCU-protected */
+	/*
+	 * This "rcu_read_lock()" helps track when someone is still looking at
+	 * the (RCU-using) eventfds array.  It's not actually a lock at all;
+	 * indeed it's a noop in many configurations.  (You didn't expect me to
+	 * explain all the RCU secrets here, did you?)
+	 */
 	rcu_read_lock();
+	/*
+	 * rcu_dereference is the counter-side of rcu_assign_pointer(); it
+	 * makes sure we don't access the memory pointed to by
+	 * cpu->lg->eventfds before cpu->lg->eventfds is set.  Sounds crazy,
+	 * but Alpha allows this!  Paul McKenney points out that a really
+	 * aggressive compiler could have the same effect:
+	 *   http://lists.ozlabs.org/pipermail/lguest/2009-July/001560.html
+	 *
+	 * So play safe, use rcu_dereference to get the rcu-protected pointer:
+	 */
 	map = rcu_dereference(cpu->lg->eventfds);
+	/*
+	 * Simple array search: even if they add an eventfd while we do this,
+	 * we'll continue to use the old array and just won't see the new one.
+	 */
 	for (i = 0; i < map->num; i++) {
 		if (map->map[i].addr == cpu->pending_notify) {
 			eventfd_signal(map->map[i].event, 1);
@@ -26,19 +54,50 @@ bool send_notify_to_eventfd(struct lg_cpu *cpu)
 			break;
 		}
 	}
+	/* We're done with the rcu-protected variable cpu->lg->eventfds. */
 	rcu_read_unlock();
+
+	/* If we cleared the notification, it's because we found a match. */
 	return cpu->pending_notify == 0;
 }
 
+/*L:055
+ * One of the more tricksy tricks in the Linux Kernel is a technique called
+ * Read Copy Update.  Since one point of lguest is to teach lguest journeyers
+ * about kernel coding, I use it here.  (In case you're curious, other purposes
+ * include learning about virtualization and instilling a deep appreciation for
+ * simplicity and puppies).
+ *
+ * We keep a simple array which maps LHCALL_NOTIFY values to eventfds, but we
+ * add new eventfds without ever blocking readers from accessing the array.
+ * The current Launcher only does this during boot, so that never happens.  But
+ * Read Copy Update is cool, and adding a lock risks damaging even more puppies
+ * than this code does.
+ *
+ * We allocate a brand new one-larger array, copy the old one and add our new
+ * element.  Then we make the lg eventfd pointer point to the new array.
+ * That's the easy part: now we need to free the old one, but we need to make
+ * sure no slow CPU somewhere is still looking at it.  That's what
+ * synchronize_rcu does for us: waits until every CPU has indicated that it has
+ * moved on to know it's no longer using the old one.
+ *
+ * If that's unclear, see http://en.wikipedia.org/wiki/Read-copy-update.
+ */
 static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
 {
 	struct lg_eventfd_map *new, *old = lg->eventfds;
 
+	/*
+	 * We don't allow notifications on value 0 anyway (pending_notify of
+	 * 0 means "nothing pending").
+	 */
 	if (!addr)
 		return -EINVAL;
 
-	/* Replace the old array with the new one, carefully: others can
-	 * be accessing it at the same time */
+	/*
+	 * Replace the old array with the new one, carefully: others can
+	 * be accessing it at the same time.
+	 */
 	new = kmalloc(sizeof(*new) + sizeof(new->map[0]) * (old->num + 1),
 		      GFP_KERNEL);
 	if (!new)
@@ -50,24 +109,43 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
 
 	/* Now append new entry. */
 	new->map[new->num].addr = addr;
-	new->map[new->num].event = eventfd_fget(fd);
+	new->map[new->num].event = eventfd_ctx_fdget(fd);
 	if (IS_ERR(new->map[new->num].event)) {
+		int err =  PTR_ERR(new->map[new->num].event);
 		kfree(new);
-		return PTR_ERR(new->map[new->num].event);
+		return err;
 	}
 	new->num++;
 
-	/* Now put new one in place. */
+	/*
+	 * Now put new one in place: rcu_assign_pointer() is a fancy way of
+	 * doing "lg->eventfds = new", but it uses memory barriers to make
+	 * absolutely sure that the contents of "new" written above is nailed
+	 * down before we actually do the assignment.
+	 *
+	 * We have to think about these kinds of things when we're operating on
+	 * live data without locks.
+	 */
 	rcu_assign_pointer(lg->eventfds, new);
 
-	/* We're not in a big hurry.  Wait until noone's looking at old
-	 * version, then delete it. */
+	/*
+	 * We're not in a big hurry.  Wait until noone's looking at old
+	 * version, then free it.
+	 */
 	synchronize_rcu();
 	kfree(old);
 
 	return 0;
 }
 
+/*L:052
+ * Receiving notifications from the Guest is usually done by attaching a
+ * particular LHCALL_NOTIFY value to an event filedescriptor.  The eventfd will
+ * become readable when the Guest does an LHCALL_NOTIFY with that value.
+ *
+ * This is really convenient for processing each virtqueue in a separate
+ * thread.
+ */
 static int attach_eventfd(struct lguest *lg, const unsigned long __user *input)
 {
 	unsigned long addr, fd;
@@ -79,15 +157,22 @@ static int attach_eventfd(struct lguest *lg, const unsigned long __user *input)
 	if (get_user(fd, input) != 0)
 		return -EFAULT;
 
+	/*
+	 * Just make sure two callers don't add eventfds at once.  We really
+	 * only need to lock against callers adding to the same Guest, so using
+	 * the Big Lguest Lock is overkill.  But this is setup, not a fast path.
+	 */
 	mutex_lock(&lguest_lock);
 	err = add_eventfd(lg, addr, fd);
 	mutex_unlock(&lguest_lock);
 
-	return 0;
+	return err;
 }
 
-/*L:050 Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
- * number to /dev/lguest. */
+/*L:050
+ * Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
+ * number to /dev/lguest.
+ */
 static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input)
 {
 	unsigned long irq;
@@ -97,12 +182,18 @@ static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input)
 	if (irq >= LGUEST_IRQS)
 		return -EINVAL;
 
+	/*
+	 * Next time the Guest runs, the core code will see if it can deliver
+	 * this interrupt.
+	 */
 	set_interrupt(cpu, irq);
 	return 0;
 }
 
-/*L:040 Once our Guest is initialized, the Launcher makes it run by reading
- * from /dev/lguest. */
+/*L:040
+ * Once our Guest is initialized, the Launcher makes it run by reading
+ * from /dev/lguest.
+ */
 static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
 {
 	struct lguest *lg = file->private_data;
@@ -138,8 +229,10 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
 		return len;
 	}
 
-	/* If we returned from read() last time because the Guest sent I/O,
-	 * clear the flag. */
+	/*
+	 * If we returned from read() last time because the Guest sent I/O,
+	 * clear the flag.
+	 */
 	if (cpu->pending_notify)
 		cpu->pending_notify = 0;
 
@@ -147,8 +240,10 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
 	return run_guest(cpu, (unsigned long __user *)user);
 }
 
-/*L:025 This actually initializes a CPU.  For the moment, a Guest is only
- * uniprocessor, so "id" is always 0. */
+/*L:025
+ * This actually initializes a CPU.  For the moment, a Guest is only
+ * uniprocessor, so "id" is always 0.
+ */
 static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
 {
 	/* We have a limited number the number of CPUs in the lguest struct. */
@@ -163,8 +258,10 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
 	/* Each CPU has a timer it can set. */
 	init_clockdev(cpu);
 
-	/* We need a complete page for the Guest registers: they are accessible
-	 * to the Guest and we can only grant it access to whole pages. */
+	/*
+	 * We need a complete page for the Guest registers: they are accessible
+	 * to the Guest and we can only grant it access to whole pages.
+	 */
 	cpu->regs_page = get_zeroed_page(GFP_KERNEL);
 	if (!cpu->regs_page)
 		return -ENOMEM;
@@ -172,29 +269,38 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
 	/* We actually put the registers at the bottom of the page. */
 	cpu->regs = (void *)cpu->regs_page + PAGE_SIZE - sizeof(*cpu->regs);
 
-	/* Now we initialize the Guest's registers, handing it the start
-	 * address. */
+	/*
+	 * Now we initialize the Guest's registers, handing it the start
+	 * address.
+	 */
 	lguest_arch_setup_regs(cpu, start_ip);
 
-	/* We keep a pointer to the Launcher task (ie. current task) for when
-	 * other Guests want to wake this one (eg. console input). */
+	/*
+	 * We keep a pointer to the Launcher task (ie. current task) for when
+	 * other Guests want to wake this one (eg. console input).
+	 */
 	cpu->tsk = current;
 
-	/* We need to keep a pointer to the Launcher's memory map, because if
+	/*
+	 * We need to keep a pointer to the Launcher's memory map, because if
 	 * the Launcher dies we need to clean it up.  If we don't keep a
-	 * reference, it is destroyed before close() is called. */
+	 * reference, it is destroyed before close() is called.
+	 */
 	cpu->mm = get_task_mm(cpu->tsk);
 
-	/* We remember which CPU's pages this Guest used last, for optimization
-	 * when the same Guest runs on the same CPU twice. */
+	/*
+	 * We remember which CPU's pages this Guest used last, for optimization
+	 * when the same Guest runs on the same CPU twice.
+	 */
 	cpu->last_pages = NULL;
 
 	/* No error == success. */
 	return 0;
 }
 
-/*L:020 The initialization write supplies 3 pointer sized (32 or 64 bit)
- * values (in addition to the LHREQ_INITIALIZE value).  These are:
+/*L:020
+ * The initialization write supplies 3 pointer sized (32 or 64 bit) values (in
+ * addition to the LHREQ_INITIALIZE value).  These are:
  *
  * base: The start of the Guest-physical memory inside the Launcher memory.
  *
@@ -206,14 +312,15 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
  */
 static int initialize(struct file *file, const unsigned long __user *input)
 {
-	/* "struct lguest" contains everything we (the Host) know about a
-	 * Guest. */
+	/* "struct lguest" contains all we (the Host) know about a Guest. */
 	struct lguest *lg;
 	int err;
 	unsigned long args[3];
 
-	/* We grab the Big Lguest lock, which protects against multiple
-	 * simultaneous initializations. */
+	/*
+	 * We grab the Big Lguest lock, which protects against multiple
+	 * simultaneous initializations.
+	 */
 	mutex_lock(&lguest_lock);
 	/* You can't initialize twice!  Close the device and start again... */
 	if (file->private_data) {
@@ -248,8 +355,10 @@ static int initialize(struct file *file, const unsigned long __user *input)
 	if (err)
 		goto free_eventfds;
 
-	/* Initialize the Guest's shadow page tables, using the toplevel
-	 * address the Launcher gave us.  This allocates memory, so can fail. */
+	/*
+	 * Initialize the Guest's shadow page tables, using the toplevel
+	 * address the Launcher gave us.  This allocates memory, so can fail.
+	 */
 	err = init_guest_pagetable(lg);
 	if (err)
 		goto free_regs;
@@ -274,20 +383,24 @@ unlock:
 	return err;
 }
 
-/*L:010 The first operation the Launcher does must be a write.  All writes
+/*L:010
+ * The first operation the Launcher does must be a write.  All writes
  * start with an unsigned long number: for the first write this must be
  * LHREQ_INITIALIZE to set up the Guest.  After that the Launcher can use
- * writes of other values to send interrupts.
+ * writes of other values to send interrupts or set up receipt of notifications.
  *
  * Note that we overload the "offset" in the /dev/lguest file to indicate what
- * CPU number we're dealing with.  Currently this is always 0, since we only
+ * CPU number we're dealing with.  Currently this is always 0 since we only
  * support uniprocessor Guests, but you can see the beginnings of SMP support
- * here. */
+ * here.
+ */
 static ssize_t write(struct file *file, const char __user *in,
 		     size_t size, loff_t *off)
 {
-	/* Once the Guest is initialized, we hold the "struct lguest" in the
-	 * file private data. */
+	/*
+	 * Once the Guest is initialized, we hold the "struct lguest" in the
+	 * file private data.
+	 */
 	struct lguest *lg = file->private_data;
 	const unsigned long __user *input = (const unsigned long __user *)in;
 	unsigned long req;
@@ -322,13 +435,15 @@ static ssize_t write(struct file *file, const char __user *in,
 	}
 }
 
-/*L:060 The final piece of interface code is the close() routine.  It reverses
+/*L:060
+ * The final piece of interface code is the close() routine.  It reverses
  * everything done in initialize().  This is usually called because the
  * Launcher exited.
  *
  * Note that the close routine returns 0 or a negative error number: it can't
  * really fail, but it can whine.  I blame Sun for this wart, and K&R C for
- * letting them do it. :*/
+ * letting them do it.
+:*/
 static int close(struct inode *inode, struct file *file)
 {
 	struct lguest *lg = file->private_data;
@@ -338,8 +453,10 @@ static int close(struct inode *inode, struct file *file)
 	if (!lg)
 		return 0;
 
-	/* We need the big lock, to protect from inter-guest I/O and other
-	 * Launchers initializing guests. */
+	/*
+	 * We need the big lock, to protect from inter-guest I/O and other
+	 * Launchers initializing guests.
+	 */
 	mutex_lock(&lguest_lock);
 
 	/* Free up the shadow page tables for the Guest. */
@@ -350,18 +467,22 @@ static int close(struct inode *inode, struct file *file)
 		hrtimer_cancel(&lg->cpus[i].hrt);
 		/* We can free up the register page we allocated. */
 		free_page(lg->cpus[i].regs_page);
-		/* Now all the memory cleanups are done, it's safe to release
-		 * the Launcher's memory management structure. */
+		/*
+		 * Now all the memory cleanups are done, it's safe to release
+		 * the Launcher's memory management structure.
+		 */
 		mmput(lg->cpus[i].mm);
 	}
 
 	/* Release any eventfds they registered. */
 	for (i = 0; i < lg->eventfds->num; i++)
-		fput(lg->eventfds->map[i].event);
+		eventfd_ctx_put(lg->eventfds->map[i].event);
 	kfree(lg->eventfds);
 
-	/* If lg->dead doesn't contain an error code it will be NULL or a
-	 * kmalloc()ed string, either of which is ok to hand to kfree(). */
+	/*
+	 * If lg->dead doesn't contain an error code it will be NULL or a
+	 * kmalloc()ed string, either of which is ok to hand to kfree().
+	 */
 	if (!IS_ERR(lg->dead))
 		kfree(lg->dead);
 	/* Free the memory allocated to the lguest_struct */
@@ -385,7 +506,8 @@ static int close(struct inode *inode, struct file *file)
  *
  * We begin our understanding with the Host kernel interface which the Launcher
  * uses: reading and writing a character device called /dev/lguest.  All the
- * work happens in the read(), write() and close() routines: */
+ * work happens in the read(), write() and close() routines:
+ */
 static struct file_operations lguest_fops = {
 	.owner	 = THIS_MODULE,
 	.release = close,
@@ -393,8 +515,10 @@ static struct file_operations lguest_fops = {
 	.read	 = read,
 };
 
-/* This is a textbook example of a "misc" character device.  Populate a "struct
- * miscdevice" and register it with misc_register(). */
+/*
+ * This is a textbook example of a "misc" character device.  Populate a "struct
+ * miscdevice" and register it with misc_register().
+ */
 static struct miscdevice lguest_dev = {
 	.minor	= MISC_DYNAMIC_MINOR,
 	.name	= "lguest",
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index a6fe1abda24..a8d0aee3bc0 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -1,9 +1,11 @@
-/*P:700 The pagetable code, on the other hand, still shows the scars of
+/*P:700
+ * The pagetable code, on the other hand, still shows the scars of
  * previous encounters.  It's functional, and as neat as it can be in the
  * circumstances, but be wary, for these things are subtle and break easily.
  * The Guest provides a virtual to physical mapping, but we can neither trust
  * it nor use it: we verify and convert it here then point the CPU to the
- * converted Guest pages when running the Guest. :*/
+ * converted Guest pages when running the Guest.
+:*/
 
 /* Copyright (C) Rusty Russell IBM Corporation 2006.
  * GPL v2 and any later version */
@@ -17,18 +19,20 @@
 #include <asm/bootparam.h>
 #include "lg.h"
 
-/*M:008 We hold reference to pages, which prevents them from being swapped.
+/*M:008
+ * We hold reference to pages, which prevents them from being swapped.
  * It'd be nice to have a callback in the "struct mm_struct" when Linux wants
  * to swap out.  If we had this, and a shrinker callback to trim PTE pages, we
- * could probably consider launching Guests as non-root. :*/
+ * could probably consider launching Guests as non-root.
+:*/
 
 /*H:300
  * The Page Table Code
  *
- * We use two-level page tables for the Guest.  If you're not entirely
- * comfortable with virtual addresses, physical addresses and page tables then
- * I recommend you review arch/x86/lguest/boot.c's "Page Table Handling" (with
- * diagrams!).
+ * We use two-level page tables for the Guest, or three-level with PAE.  If
+ * you're not entirely comfortable with virtual addresses, physical addresses
+ * and page tables then I recommend you review arch/x86/lguest/boot.c's "Page
+ * Table Handling" (with diagrams!).
  *
  * The Guest keeps page tables, but we maintain the actual ones here: these are
  * called "shadow" page tables.  Which is a very Guest-centric name: these are
@@ -45,16 +49,18 @@
  *  (v) Flushing (throwing away) page tables,
  *  (vi) Mapping the Switcher when the Guest is about to run,
  *  (vii) Setting up the page tables initially.
- :*/
+:*/
 
-
-/* 1024 entries in a page table page maps 1024 pages: 4MB.  The Switcher is
- * conveniently placed at the top 4MB, so it uses a separate, complete PTE
- * page.  */
+/*
+ * The Switcher uses the complete top PTE page.  That's 1024 PTE entries (4MB)
+ * or 512 PTE entries with PAE (2MB).
+ */
 #define SWITCHER_PGD_INDEX (PTRS_PER_PGD - 1)
 
-/* For PAE we need the PMD index as well. We use the last 2MB, so we
- * will need the last pmd entry of the last pmd page.  */
+/*
+ * For PAE we need the PMD index as well. We use the last 2MB, so we
+ * will need the last pmd entry of the last pmd page.
+ */
 #ifdef CONFIG_X86_PAE
 #define SWITCHER_PMD_INDEX 	(PTRS_PER_PMD - 1)
 #define RESERVE_MEM 		2U
@@ -64,14 +70,18 @@
 #define CHECK_GPGD_MASK		_PAGE_TABLE
 #endif
 
-/* We actually need a separate PTE page for each CPU.  Remember that after the
+/*
+ * We actually need a separate PTE page for each CPU.  Remember that after the
  * Switcher code itself comes two pages for each CPU, and we don't want this
- * CPU's guest to see the pages of any other CPU. */
+ * CPU's guest to see the pages of any other CPU.
+ */
 static DEFINE_PER_CPU(pte_t *, switcher_pte_pages);
 #define switcher_pte_page(cpu) per_cpu(switcher_pte_pages, cpu)
 
-/*H:320 The page table code is curly enough to need helper functions to keep it
- * clear and clean.
+/*H:320
+ * The page table code is curly enough to need helper functions to keep it
+ * clear and clean.  The kernel itself provides many of them; one advantage
+ * of insisting that the Guest and Host use the same CONFIG_PAE setting.
  *
  * There are two functions which return pointers to the shadow (aka "real")
  * page tables.
@@ -79,7 +89,8 @@ static DEFINE_PER_CPU(pte_t *, switcher_pte_pages);
  * spgd_addr() takes the virtual address and returns a pointer to the top-level
  * page directory entry (PGD) for that address.  Since we keep track of several
  * page tables, the "i" argument tells us which one we're interested in (it's
- * usually the current one). */
+ * usually the current one).
+ */
 static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr)
 {
 	unsigned int index = pgd_index(vaddr);
@@ -96,9 +107,11 @@ static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr)
 }
 
 #ifdef CONFIG_X86_PAE
-/* This routine then takes the PGD entry given above, which contains the
+/*
+ * This routine then takes the PGD entry given above, which contains the
  * address of the PMD page.  It then returns a pointer to the PMD entry for the
- * given address. */
+ * given address.
+ */
 static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
 {
 	unsigned int index = pmd_index(vaddr);
@@ -119,9 +132,11 @@ static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
 }
 #endif
 
-/* This routine then takes the page directory entry returned above, which
+/*
+ * This routine then takes the page directory entry returned above, which
  * contains the address of the page table entry (PTE) page.  It then returns a
- * pointer to the PTE entry for the given address. */
+ * pointer to the PTE entry for the given address.
+ */
 static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
 {
 #ifdef CONFIG_X86_PAE
@@ -139,8 +154,10 @@ static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
 	return &page[pte_index(vaddr)];
 }
 
-/* These two functions just like the above two, except they access the Guest
- * page tables.  Hence they return a Guest address. */
+/*
+ * These functions are just like the above two, except they access the Guest
+ * page tables.  Hence they return a Guest address.
+ */
 static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
 {
 	unsigned int index = vaddr >> (PGDIR_SHIFT);
@@ -148,6 +165,7 @@ static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
 }
 
 #ifdef CONFIG_X86_PAE
+/* Follow the PGD to the PMD. */
 static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
 {
 	unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
@@ -155,6 +173,7 @@ static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
 	return gpage + pmd_index(vaddr) * sizeof(pmd_t);
 }
 
+/* Follow the PMD to the PTE. */
 static unsigned long gpte_addr(struct lg_cpu *cpu,
 			       pmd_t gpmd, unsigned long vaddr)
 {
@@ -164,6 +183,7 @@ static unsigned long gpte_addr(struct lg_cpu *cpu,
 	return gpage + pte_index(vaddr) * sizeof(pte_t);
 }
 #else
+/* Follow the PGD to the PTE (no mid-level for !PAE). */
 static unsigned long gpte_addr(struct lg_cpu *cpu,
 				pgd_t gpgd, unsigned long vaddr)
 {
@@ -175,17 +195,21 @@ static unsigned long gpte_addr(struct lg_cpu *cpu,
 #endif
 /*:*/
 
-/*M:014 get_pfn is slow: we could probably try to grab batches of pages here as
- * an optimization (ie. pre-faulting). :*/
+/*M:014
+ * get_pfn is slow: we could probably try to grab batches of pages here as
+ * an optimization (ie. pre-faulting).
+:*/
 
-/*H:350 This routine takes a page number given by the Guest and converts it to
+/*H:350
+ * This routine takes a page number given by the Guest and converts it to
  * an actual, physical page number.  It can fail for several reasons: the
  * virtual address might not be mapped by the Launcher, the write flag is set
  * and the page is read-only, or the write flag was set and the page was
  * shared so had to be copied, but we ran out of memory.
  *
  * This holds a reference to the page, so release_pte() is careful to put that
- * back. */
+ * back.
+ */
 static unsigned long get_pfn(unsigned long virtpfn, int write)
 {
 	struct page *page;
@@ -198,33 +222,41 @@ static unsigned long get_pfn(unsigned long virtpfn, int write)
 	return -1UL;
 }
 
-/*H:340 Converting a Guest page table entry to a shadow (ie. real) page table
+/*H:340
+ * Converting a Guest page table entry to a shadow (ie. real) page table
  * entry can be a little tricky.  The flags are (almost) the same, but the
  * Guest PTE contains a virtual page number: the CPU needs the real page
- * number. */
+ * number.
+ */
 static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write)
 {
 	unsigned long pfn, base, flags;
 
-	/* The Guest sets the global flag, because it thinks that it is using
+	/*
+	 * The Guest sets the global flag, because it thinks that it is using
 	 * PGE.  We only told it to use PGE so it would tell us whether it was
 	 * flushing a kernel mapping or a userspace mapping.  We don't actually
-	 * use the global bit, so throw it away. */
+	 * use the global bit, so throw it away.
+	 */
 	flags = (pte_flags(gpte) & ~_PAGE_GLOBAL);
 
 	/* The Guest's pages are offset inside the Launcher. */
 	base = (unsigned long)cpu->lg->mem_base / PAGE_SIZE;
 
-	/* We need a temporary "unsigned long" variable to hold the answer from
+	/*
+	 * We need a temporary "unsigned long" variable to hold the answer from
 	 * get_pfn(), because it returns 0xFFFFFFFF on failure, which wouldn't
 	 * fit in spte.pfn.  get_pfn() finds the real physical number of the
-	 * page, given the virtual number. */
+	 * page, given the virtual number.
+	 */
 	pfn = get_pfn(base + pte_pfn(gpte), write);
 	if (pfn == -1UL) {
 		kill_guest(cpu, "failed to get page %lu", pte_pfn(gpte));
-		/* When we destroy the Guest, we'll go through the shadow page
+		/*
+		 * When we destroy the Guest, we'll go through the shadow page
 		 * tables and release_pte() them.  Make sure we don't think
-		 * this one is valid! */
+		 * this one is valid!
+		 */
 		flags = 0;
 	}
 	/* Now we assemble our shadow PTE from the page number and flags. */
@@ -234,8 +266,10 @@ static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write)
 /*H:460 And to complete the chain, release_pte() looks like this: */
 static void release_pte(pte_t pte)
 {
-	/* Remember that get_user_pages_fast() took a reference to the page, in
-	 * get_pfn()?  We have to put it back now. */
+	/*
+	 * Remember that get_user_pages_fast() took a reference to the page, in
+	 * get_pfn()?  We have to put it back now.
+	 */
 	if (pte_flags(pte) & _PAGE_PRESENT)
 		put_page(pte_page(pte));
 }
@@ -273,7 +307,8 @@ static void check_gpmd(struct lg_cpu *cpu, pmd_t gpmd)
  * and return to the Guest without it knowing.
  *
  * If we fixed up the fault (ie. we mapped the address), this routine returns
- * true.  Otherwise, it was a real fault and we need to tell the Guest. */
+ * true.  Otherwise, it was a real fault and we need to tell the Guest.
+ */
 bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 {
 	pgd_t gpgd;
@@ -282,6 +317,7 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 	pte_t gpte;
 	pte_t *spte;
 
+	/* Mid level for PAE. */
 #ifdef CONFIG_X86_PAE
 	pmd_t *spmd;
 	pmd_t gpmd;
@@ -298,22 +334,26 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 	if (!(pgd_flags(*spgd) & _PAGE_PRESENT)) {
 		/* No shadow entry: allocate a new shadow PTE page. */
 		unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
-		/* This is not really the Guest's fault, but killing it is
-		 * simple for this corner case. */
+		/*
+		 * This is not really the Guest's fault, but killing it is
+		 * simple for this corner case.
+		 */
 		if (!ptepage) {
 			kill_guest(cpu, "out of memory allocating pte page");
 			return false;
 		}
 		/* We check that the Guest pgd is OK. */
 		check_gpgd(cpu, gpgd);
-		/* And we copy the flags to the shadow PGD entry.  The page
-		 * number in the shadow PGD is the page we just allocated. */
+		/*
+		 * And we copy the flags to the shadow PGD entry.  The page
+		 * number in the shadow PGD is the page we just allocated.
+		 */
 		set_pgd(spgd, __pgd(__pa(ptepage) | pgd_flags(gpgd)));
 	}
 
 #ifdef CONFIG_X86_PAE
 	gpmd = lgread(cpu, gpmd_addr(gpgd, vaddr), pmd_t);
-	/* middle level not present?  We can't map it in. */
+	/* Middle level not present?  We can't map it in. */
 	if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
 		return false;
 
@@ -324,8 +364,10 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 		/* No shadow entry: allocate a new shadow PTE page. */
 		unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
 
-		/* This is not really the Guest's fault, but killing it is
-		* simple for this corner case. */
+		/*
+		 * This is not really the Guest's fault, but killing it is
+		 * simple for this corner case.
+		 */
 		if (!ptepage) {
 			kill_guest(cpu, "out of memory allocating pte page");
 			return false;
@@ -334,27 +376,37 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 		/* We check that the Guest pmd is OK. */
 		check_gpmd(cpu, gpmd);
 
-		/* And we copy the flags to the shadow PMD entry.  The page
-		 * number in the shadow PMD is the page we just allocated. */
+		/*
+		 * And we copy the flags to the shadow PMD entry.  The page
+		 * number in the shadow PMD is the page we just allocated.
+		 */
 		native_set_pmd(spmd, __pmd(__pa(ptepage) | pmd_flags(gpmd)));
 	}
 
-	/* OK, now we look at the lower level in the Guest page table: keep its
-	 * address, because we might update it later. */
+	/*
+	 * OK, now we look at the lower level in the Guest page table: keep its
+	 * address, because we might update it later.
+	 */
 	gpte_ptr = gpte_addr(cpu, gpmd, vaddr);
 #else
-	/* OK, now we look at the lower level in the Guest page table: keep its
-	 * address, because we might update it later. */
+	/*
+	 * OK, now we look at the lower level in the Guest page table: keep its
+	 * address, because we might update it later.
+	 */
 	gpte_ptr = gpte_addr(cpu, gpgd, vaddr);
 #endif
+
+	/* Read the actual PTE value. */
 	gpte = lgread(cpu, gpte_ptr, pte_t);
 
 	/* If this page isn't in the Guest page tables, we can't page it in. */
 	if (!(pte_flags(gpte) & _PAGE_PRESENT))
 		return false;
 
-	/* Check they're not trying to write to a page the Guest wants
-	 * read-only (bit 2 of errcode == write). */
+	/*
+	 * Check they're not trying to write to a page the Guest wants
+	 * read-only (bit 2 of errcode == write).
+	 */
 	if ((errcode & 2) && !(pte_flags(gpte) & _PAGE_RW))
 		return false;
 
@@ -362,8 +414,10 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 	if ((errcode & 4) && !(pte_flags(gpte) & _PAGE_USER))
 		return false;
 
-	/* Check that the Guest PTE flags are OK, and the page number is below
-	 * the pfn_limit (ie. not mapping the Launcher binary). */
+	/*
+	 * Check that the Guest PTE flags are OK, and the page number is below
+	 * the pfn_limit (ie. not mapping the Launcher binary).
+	 */
 	check_gpte(cpu, gpte);
 
 	/* Add the _PAGE_ACCESSED and (for a write) _PAGE_DIRTY flag */
@@ -373,29 +427,40 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 
 	/* Get the pointer to the shadow PTE entry we're going to set. */
 	spte = spte_addr(cpu, *spgd, vaddr);
-	/* If there was a valid shadow PTE entry here before, we release it.
-	 * This can happen with a write to a previously read-only entry. */
+
+	/*
+	 * If there was a valid shadow PTE entry here before, we release it.
+	 * This can happen with a write to a previously read-only entry.
+	 */
 	release_pte(*spte);
 
-	/* If this is a write, we insist that the Guest page is writable (the
-	 * final arg to gpte_to_spte()). */
+	/*
+	 * If this is a write, we insist that the Guest page is writable (the
+	 * final arg to gpte_to_spte()).
+	 */
 	if (pte_dirty(gpte))
 		*spte = gpte_to_spte(cpu, gpte, 1);
 	else
-		/* If this is a read, don't set the "writable" bit in the page
+		/*
+		 * If this is a read, don't set the "writable" bit in the page
 		 * table entry, even if the Guest says it's writable.  That way
 		 * we will come back here when a write does actually occur, so
-		 * we can update the Guest's _PAGE_DIRTY flag. */
+		 * we can update the Guest's _PAGE_DIRTY flag.
+		 */
 		native_set_pte(spte, gpte_to_spte(cpu, pte_wrprotect(gpte), 0));
 
-	/* Finally, we write the Guest PTE entry back: we've set the
-	 * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. */
+	/*
+	 * Finally, we write the Guest PTE entry back: we've set the
+	 * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags.
+	 */
 	lgwrite(cpu, gpte_ptr, pte_t, gpte);
 
-	/* The fault is fixed, the page table is populated, the mapping
+	/*
+	 * The fault is fixed, the page table is populated, the mapping
 	 * manipulated, the result returned and the code complete.  A small
 	 * delay and a trace of alliteration are the only indications the Guest
-	 * has that a page fault occurred at all. */
+	 * has that a page fault occurred at all.
+	 */
 	return true;
 }
 
@@ -408,7 +473,8 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
  * mapped, so it's overkill.
  *
  * This is a quick version which answers the question: is this virtual address
- * mapped by the shadow page tables, and is it writable? */
+ * mapped by the shadow page tables, and is it writable?
+ */
 static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr)
 {
 	pgd_t *spgd;
@@ -428,21 +494,26 @@ static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr)
 		return false;
 #endif
 
-	/* Check the flags on the pte entry itself: it must be present and
-	 * writable. */
+	/*
+	 * Check the flags on the pte entry itself: it must be present and
+	 * writable.
+	 */
 	flags = pte_flags(*(spte_addr(cpu, *spgd, vaddr)));
 
 	return (flags & (_PAGE_PRESENT|_PAGE_RW)) == (_PAGE_PRESENT|_PAGE_RW);
 }
 
-/* So, when pin_stack_pages() asks us to pin a page, we check if it's already
+/*
+ * So, when pin_stack_pages() asks us to pin a page, we check if it's already
  * in the page tables, and if not, we call demand_page() with error code 2
- * (meaning "write"). */
+ * (meaning "write").
+ */
 void pin_page(struct lg_cpu *cpu, unsigned long vaddr)
 {
 	if (!page_writable(cpu, vaddr) && !demand_page(cpu, vaddr, 2))
 		kill_guest(cpu, "bad stack page %#lx", vaddr);
 }
+/*:*/
 
 #ifdef CONFIG_X86_PAE
 static void release_pmd(pmd_t *spmd)
@@ -479,15 +550,21 @@ static void release_pgd(pgd_t *spgd)
 }
 
 #else /* !CONFIG_X86_PAE */
-/*H:450 If we chase down the release_pgd() code, it looks like this: */
+/*H:450
+ * If we chase down the release_pgd() code, the non-PAE version looks like
+ * this.  The PAE version is almost identical, but instead of calling
+ * release_pte it calls release_pmd(), which looks much like this.
+ */
 static void release_pgd(pgd_t *spgd)
 {
 	/* If the entry's not present, there's nothing to release. */
 	if (pgd_flags(*spgd) & _PAGE_PRESENT) {
 		unsigned int i;
-		/* Converting the pfn to find the actual PTE page is easy: turn
+		/*
+		 * Converting the pfn to find the actual PTE page is easy: turn
 		 * the page number into a physical address, then convert to a
-		 * virtual address (easy for kernel pages like this one). */
+		 * virtual address (easy for kernel pages like this one).
+		 */
 		pte_t *ptepage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
 		/* For each entry in the page, we might need to release it. */
 		for (i = 0; i < PTRS_PER_PTE; i++)
@@ -499,9 +576,12 @@ static void release_pgd(pgd_t *spgd)
 	}
 }
 #endif
-/*H:445 We saw flush_user_mappings() twice: once from the flush_user_mappings()
+
+/*H:445
+ * We saw flush_user_mappings() twice: once from the flush_user_mappings()
  * hypercall and once in new_pgdir() when we re-used a top-level pgdir page.
- * It simply releases every PTE page from 0 up to the Guest's kernel address. */
+ * It simply releases every PTE page from 0 up to the Guest's kernel address.
+ */
 static void flush_user_mappings(struct lguest *lg, int idx)
 {
 	unsigned int i;
@@ -510,10 +590,12 @@ static void flush_user_mappings(struct lguest *lg, int idx)
 		release_pgd(lg->pgdirs[idx].pgdir + i);
 }
 
-/*H:440 (v) Flushing (throwing away) page tables,
+/*H:440
+ * (v) Flushing (throwing away) page tables,
  *
  * The Guest has a hypercall to throw away the page tables: it's used when a
- * large number of mappings have been changed. */
+ * large number of mappings have been changed.
+ */
 void guest_pagetable_flush_user(struct lg_cpu *cpu)
 {
 	/* Drop the userspace part of the current page table. */
@@ -551,9 +633,11 @@ unsigned long guest_pa(struct lg_cpu *cpu, unsigned long vaddr)
 	return pte_pfn(gpte) * PAGE_SIZE | (vaddr & ~PAGE_MASK);
 }
 
-/* We keep several page tables.  This is a simple routine to find the page
+/*
+ * We keep several page tables.  This is a simple routine to find the page
  * table (if any) corresponding to this top-level address the Guest has given
- * us. */
+ * us.
+ */
 static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable)
 {
 	unsigned int i;
@@ -563,9 +647,11 @@ static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable)
 	return i;
 }
 
-/*H:435 And this is us, creating the new page directory.  If we really do
+/*H:435
+ * And this is us, creating the new page directory.  If we really do
  * allocate a new one (and so the kernel parts are not there), we set
- * blank_pgdir. */
+ * blank_pgdir.
+ */
 static unsigned int new_pgdir(struct lg_cpu *cpu,
 			      unsigned long gpgdir,
 			      int *blank_pgdir)
@@ -575,8 +661,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 	pmd_t *pmd_table;
 #endif
 
-	/* We pick one entry at random to throw out.  Choosing the Least
-	 * Recently Used might be better, but this is easy. */
+	/*
+	 * We pick one entry at random to throw out.  Choosing the Least
+	 * Recently Used might be better, but this is easy.
+	 */
 	next = random32() % ARRAY_SIZE(cpu->lg->pgdirs);
 	/* If it's never been allocated at all before, try now. */
 	if (!cpu->lg->pgdirs[next].pgdir) {
@@ -587,8 +675,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 			next = cpu->cpu_pgd;
 		else {
 #ifdef CONFIG_X86_PAE
-			/* In PAE mode, allocate a pmd page and populate the
-			 * last pgd entry. */
+			/*
+			 * In PAE mode, allocate a pmd page and populate the
+			 * last pgd entry.
+			 */
 			pmd_table = (pmd_t *)get_zeroed_page(GFP_KERNEL);
 			if (!pmd_table) {
 				free_page((long)cpu->lg->pgdirs[next].pgdir);
@@ -598,8 +688,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 				set_pgd(cpu->lg->pgdirs[next].pgdir +
 					SWITCHER_PGD_INDEX,
 					__pgd(__pa(pmd_table) | _PAGE_PRESENT));
-				/* This is a blank page, so there are no kernel
-				 * mappings: caller must map the stack! */
+				/*
+				 * This is a blank page, so there are no kernel
+				 * mappings: caller must map the stack!
+				 */
 				*blank_pgdir = 1;
 			}
 #else
@@ -615,19 +707,23 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 	return next;
 }
 
-/*H:430 (iv) Switching page tables
+/*H:430
+ * (iv) Switching page tables
  *
  * Now we've seen all the page table setting and manipulation, let's see
  * what happens when the Guest changes page tables (ie. changes the top-level
- * pgdir).  This occurs on almost every context switch. */
+ * pgdir).  This occurs on almost every context switch.
+ */
 void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
 {
 	int newpgdir, repin = 0;
 
 	/* Look to see if we have this one already. */
 	newpgdir = find_pgdir(cpu->lg, pgtable);
-	/* If not, we allocate or mug an existing one: if it's a fresh one,
-	 * repin gets set to 1. */
+	/*
+	 * If not, we allocate or mug an existing one: if it's a fresh one,
+	 * repin gets set to 1.
+	 */
 	if (newpgdir == ARRAY_SIZE(cpu->lg->pgdirs))
 		newpgdir = new_pgdir(cpu, pgtable, &repin);
 	/* Change the current pgd index to the new one. */
@@ -637,9 +733,11 @@ void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
 		pin_stack_pages(cpu);
 }
 
-/*H:470 Finally, a routine which throws away everything: all PGD entries in all
+/*H:470
+ * Finally, a routine which throws away everything: all PGD entries in all
  * the shadow page tables, including the Guest's kernel mappings.  This is used
- * when we destroy the Guest. */
+ * when we destroy the Guest.
+ */
 static void release_all_pagetables(struct lguest *lg)
 {
 	unsigned int i, j;
@@ -656,8 +754,10 @@ static void release_all_pagetables(struct lguest *lg)
 			spgd = lg->pgdirs[i].pgdir + SWITCHER_PGD_INDEX;
 			pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
 
-			/* And release the pmd entries of that pmd page,
-			 * except for the switcher pmd. */
+			/*
+			 * And release the pmd entries of that pmd page,
+			 * except for the switcher pmd.
+			 */
 			for (k = 0; k < SWITCHER_PMD_INDEX; k++)
 				release_pmd(&pmdpage[k]);
 #endif
@@ -667,10 +767,12 @@ static void release_all_pagetables(struct lguest *lg)
 		}
 }
 
-/* We also throw away everything when a Guest tells us it's changed a kernel
+/*
+ * We also throw away everything when a Guest tells us it's changed a kernel
  * mapping.  Since kernel mappings are in every page table, it's easiest to
  * throw them all away.  This traps the Guest in amber for a while as
- * everything faults back in, but it's rare. */
+ * everything faults back in, but it's rare.
+ */
 void guest_pagetable_clear_all(struct lg_cpu *cpu)
 {
 	release_all_pagetables(cpu->lg);
@@ -678,15 +780,19 @@ void guest_pagetable_clear_all(struct lg_cpu *cpu)
 	pin_stack_pages(cpu);
 }
 /*:*/
-/*M:009 Since we throw away all mappings when a kernel mapping changes, our
+
+/*M:009
+ * Since we throw away all mappings when a kernel mapping changes, our
  * performance sucks for guests using highmem.  In fact, a guest with
  * PAGE_OFFSET 0xc0000000 (the default) and more than about 700MB of RAM is
  * usually slower than a Guest with less memory.
  *
  * This, of course, cannot be fixed.  It would take some kind of... well, I
- * don't know, but the term "puissant code-fu" comes to mind. :*/
+ * don't know, but the term "puissant code-fu" comes to mind.
+:*/
 
-/*H:420 This is the routine which actually sets the page table entry for then
+/*H:420
+ * This is the routine which actually sets the page table entry for then
  * "idx"'th shadow page table.
  *
  * Normally, we can just throw out the old entry and replace it with 0: if they
@@ -715,31 +821,36 @@ static void do_set_pte(struct lg_cpu *cpu, int idx,
 		spmd = spmd_addr(cpu, *spgd, vaddr);
 		if (pmd_flags(*spmd) & _PAGE_PRESENT) {
 #endif
-			/* Otherwise, we start by releasing
-			 * the existing entry. */
+			/* Otherwise, start by releasing the existing entry. */
 			pte_t *spte = spte_addr(cpu, *spgd, vaddr);
 			release_pte(*spte);
 
-			/* If they're setting this entry as dirty or accessed,
-			 * we might as well put that entry they've given us
-			 * in now.  This shaves 10% off a
-			 * copy-on-write micro-benchmark. */
+			/*
+			 * If they're setting this entry as dirty or accessed,
+			 * we might as well put that entry they've given us in
+			 * now.  This shaves 10% off a copy-on-write
+			 * micro-benchmark.
+			 */
 			if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
 				check_gpte(cpu, gpte);
 				native_set_pte(spte,
 						gpte_to_spte(cpu, gpte,
 						pte_flags(gpte) & _PAGE_DIRTY));
-			} else
-				/* Otherwise kill it and we can demand_page()
-				 * it in later. */
+			} else {
+				/*
+				 * Otherwise kill it and we can demand_page()
+				 * it in later.
+				 */
 				native_set_pte(spte, __pte(0));
+			}
 #ifdef CONFIG_X86_PAE
 		}
 #endif
 	}
 }
 
-/*H:410 Updating a PTE entry is a little trickier.
+/*H:410
+ * Updating a PTE entry is a little trickier.
  *
  * We keep track of several different page tables (the Guest uses one for each
  * process, so it makes sense to cache at least a few).  Each of these have
@@ -748,12 +859,15 @@ static void do_set_pte(struct lg_cpu *cpu, int idx,
  * all the page tables, not just the current one.  This is rare.
  *
  * The benefit is that when we have to track a new page table, we can keep all
- * the kernel mappings.  This speeds up context switch immensely. */
+ * the kernel mappings.  This speeds up context switch immensely.
+ */
 void guest_set_pte(struct lg_cpu *cpu,
 		   unsigned long gpgdir, unsigned long vaddr, pte_t gpte)
 {
-	/* Kernel mappings must be changed on all top levels.  Slow, but doesn't
-	 * happen often. */
+	/*
+	 * Kernel mappings must be changed on all top levels.  Slow, but doesn't
+	 * happen often.
+	 */
 	if (vaddr >= cpu->lg->kernel_address) {
 		unsigned int i;
 		for (i = 0; i < ARRAY_SIZE(cpu->lg->pgdirs); i++)
@@ -795,19 +909,25 @@ void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx)
 		/* ... throw it away. */
 		release_pgd(lg->pgdirs[pgdir].pgdir + idx);
 }
+
 #ifdef CONFIG_X86_PAE
+/* For setting a mid-level, we just throw everything away.  It's easy. */
 void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx)
 {
 	guest_pagetable_clear_all(&lg->cpus[0]);
 }
 #endif
 
-/* Once we know how much memory we have we can construct simple identity
- * (which set virtual == physical) and linear mappings
- * which will get the Guest far enough into the boot to create its own.
+/*H:505
+ * To get through boot, we construct simple identity page mappings (which
+ * set virtual == physical) and linear mappings which will get the Guest far
+ * enough into the boot to create its own.  The linear mapping means we
+ * simplify the Guest boot, but it makes assumptions about their PAGE_OFFSET,
+ * as you'll see.
  *
  * We lay them out of the way, just below the initrd (which is why we need to
- * know its size here). */
+ * know its size here).
+ */
 static unsigned long setup_pagetables(struct lguest *lg,
 				      unsigned long mem,
 				      unsigned long initrd_size)
@@ -825,8 +945,10 @@ static unsigned long setup_pagetables(struct lguest *lg,
 	unsigned int phys_linear;
 #endif
 
-	/* We have mapped_pages frames to map, so we need
-	 * linear_pages page tables to map them. */
+	/*
+	 * We have mapped_pages frames to map, so we need linear_pages page
+	 * tables to map them.
+	 */
 	mapped_pages = mem / PAGE_SIZE;
 	linear_pages = (mapped_pages + PTRS_PER_PTE - 1) / PTRS_PER_PTE;
 
@@ -837,10 +959,16 @@ static unsigned long setup_pagetables(struct lguest *lg,
 	linear = (void *)pgdir - linear_pages * PAGE_SIZE;
 
 #ifdef CONFIG_X86_PAE
+	/*
+	 * And the single mid page goes below that.  We only use one, but
+	 * that's enough to map 1G, which definitely gets us through boot.
+	 */
 	pmds = (void *)linear - PAGE_SIZE;
 #endif
-	/* Linear mapping is easy: put every page's address into the
-	 * mapping in order. */
+	/*
+	 * Linear mapping is easy: put every page's address into the
+	 * mapping in order.
+	 */
 	for (i = 0; i < mapped_pages; i++) {
 		pte_t pte;
 		pte = pfn_pte(i, __pgprot(_PAGE_PRESENT|_PAGE_RW|_PAGE_USER));
@@ -848,11 +976,14 @@ static unsigned long setup_pagetables(struct lguest *lg,
 			return -EFAULT;
 	}
 
-	/* The top level points to the linear page table pages above.
-	 * We setup the identity and linear mappings here. */
 #ifdef CONFIG_X86_PAE
+	/*
+	 * Make the Guest PMD entries point to the corresponding place in the
+	 * linear mapping (up to one page worth of PMD).
+	 */
 	for (i = j = 0; i < mapped_pages && j < PTRS_PER_PMD;
 	     i += PTRS_PER_PTE, j++) {
+		/* FIXME: native_set_pmd is overkill here. */
 		native_set_pmd(&pmd, __pmd(((unsigned long)(linear + i)
 		- mem_base) | _PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
 
@@ -860,18 +991,36 @@ static unsigned long setup_pagetables(struct lguest *lg,
 			return -EFAULT;
 	}
 
+	/* One PGD entry, pointing to that PMD page. */
 	set_pgd(&pgd, __pgd(((u32)pmds - mem_base) | _PAGE_PRESENT));
+	/* Copy it in as the first PGD entry (ie. addresses 0-1G). */
 	if (copy_to_user(&pgdir[0], &pgd, sizeof(pgd)) != 0)
 		return -EFAULT;
+	/*
+	 * And the third PGD entry (ie. addresses 3G-4G).
+	 *
+	 * FIXME: This assumes that PAGE_OFFSET for the Guest is 0xC0000000.
+	 */
 	if (copy_to_user(&pgdir[3], &pgd, sizeof(pgd)) != 0)
 		return -EFAULT;
 #else
+	/*
+	 * The top level points to the linear page table pages above.
+	 * We setup the identity and linear mappings here.
+	 */
 	phys_linear = (unsigned long)linear - mem_base;
 	for (i = 0; i < mapped_pages; i += PTRS_PER_PTE) {
 		pgd_t pgd;
+		/*
+		 * Create a PGD entry which points to the right part of the
+		 * linear PTE pages.
+		 */
 		pgd = __pgd((phys_linear + i * sizeof(pte_t)) |
 			    (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
 
+		/*
+		 * Copy it into the PGD page at 0 and PAGE_OFFSET.
+		 */
 		if (copy_to_user(&pgdir[i / PTRS_PER_PTE], &pgd, sizeof(pgd))
 		    || copy_to_user(&pgdir[pgd_index(PAGE_OFFSET)
 					   + i / PTRS_PER_PTE],
@@ -880,15 +1029,19 @@ static unsigned long setup_pagetables(struct lguest *lg,
 	}
 #endif
 
-	/* We return the top level (guest-physical) address: remember where
-	 * this is. */
+	/*
+	 * We return the top level (guest-physical) address: we remember where
+	 * this is to write it into lguest_data when the Guest initializes.
+	 */
 	return (unsigned long)pgdir - mem_base;
 }
 
-/*H:500 (vii) Setting up the page tables initially.
+/*H:500
+ * (vii) Setting up the page tables initially.
  *
  * When a Guest is first created, the Launcher tells us where the toplevel of
- * its first page table is.  We set some things up here: */
+ * its first page table is.  We set some things up here:
+ */
 int init_guest_pagetable(struct lguest *lg)
 {
 	u64 mem;
@@ -898,21 +1051,27 @@ int init_guest_pagetable(struct lguest *lg)
 	pgd_t *pgd;
 	pmd_t *pmd_table;
 #endif
-	/* Get the Guest memory size and the ramdisk size from the boot header
-	 * located at lg->mem_base (Guest address 0). */
+	/*
+	 * Get the Guest memory size and the ramdisk size from the boot header
+	 * located at lg->mem_base (Guest address 0).
+	 */
 	if (copy_from_user(&mem, &boot->e820_map[0].size, sizeof(mem))
 	    || get_user(initrd_size, &boot->hdr.ramdisk_size))
 		return -EFAULT;
 
-	/* We start on the first shadow page table, and give it a blank PGD
-	 * page. */
+	/*
+	 * We start on the first shadow page table, and give it a blank PGD
+	 * page.
+	 */
 	lg->pgdirs[0].gpgdir = setup_pagetables(lg, mem, initrd_size);
 	if (IS_ERR_VALUE(lg->pgdirs[0].gpgdir))
 		return lg->pgdirs[0].gpgdir;
 	lg->pgdirs[0].pgdir = (pgd_t *)get_zeroed_page(GFP_KERNEL);
 	if (!lg->pgdirs[0].pgdir)
 		return -ENOMEM;
+
 #ifdef CONFIG_X86_PAE
+	/* For PAE, we also create the initial mid-level. */
 	pgd = lg->pgdirs[0].pgdir;
 	pmd_table = (pmd_t *) get_zeroed_page(GFP_KERNEL);
 	if (!pmd_table)
@@ -921,27 +1080,33 @@ int init_guest_pagetable(struct lguest *lg)
 	set_pgd(pgd + SWITCHER_PGD_INDEX,
 		__pgd(__pa(pmd_table) | _PAGE_PRESENT));
 #endif
+
+	/* This is the current page table. */
 	lg->cpus[0].cpu_pgd = 0;
 	return 0;
 }
 
-/* When the Guest calls LHCALL_LGUEST_INIT we do more setup. */
+/*H:508 When the Guest calls LHCALL_LGUEST_INIT we do more setup. */
 void page_table_guest_data_init(struct lg_cpu *cpu)
 {
 	/* We get the kernel address: above this is all kernel memory. */
 	if (get_user(cpu->lg->kernel_address,
 		&cpu->lg->lguest_data->kernel_address)
-		/* We tell the Guest that it can't use the top 2 or 4 MB
-		 * of virtual addresses used by the Switcher. */
+		/*
+		 * We tell the Guest that it can't use the top 2 or 4 MB
+		 * of virtual addresses used by the Switcher.
+		 */
 		|| put_user(RESERVE_MEM * 1024 * 1024,
 			&cpu->lg->lguest_data->reserve_mem)
 		|| put_user(cpu->lg->pgdirs[0].gpgdir,
 			&cpu->lg->lguest_data->pgdir))
 		kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
 
-	/* In flush_user_mappings() we loop from 0 to
+	/*
+	 * In flush_user_mappings() we loop from 0 to
 	 * "pgd_index(lg->kernel_address)".  This assumes it won't hit the
-	 * Switcher mappings, so check that now. */
+	 * Switcher mappings, so check that now.
+	 */
 #ifdef CONFIG_X86_PAE
 	if (pgd_index(cpu->lg->kernel_address) == SWITCHER_PGD_INDEX &&
 		pmd_index(cpu->lg->kernel_address) == SWITCHER_PMD_INDEX)
@@ -964,12 +1129,14 @@ void free_guest_pagetable(struct lguest *lg)
 		free_page((long)lg->pgdirs[i].pgdir);
 }
 
-/*H:480 (vi) Mapping the Switcher when the Guest is about to run.
+/*H:480
+ * (vi) Mapping the Switcher when the Guest is about to run.
  *
  * The Switcher and the two pages for this CPU need to be visible in the
  * Guest (and not the pages for other CPUs).  We have the appropriate PTE pages
  * for each CPU already set up, we just need to hook them in now we know which
- * Guest is about to run on this CPU. */
+ * Guest is about to run on this CPU.
+ */
 void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
 {
 	pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages);
@@ -980,30 +1147,38 @@ void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
 	pmd_t switcher_pmd;
 	pmd_t *pmd_table;
 
+	/* FIXME: native_set_pmd is overkill here. */
 	native_set_pmd(&switcher_pmd, pfn_pmd(__pa(switcher_pte_page) >>
 		       PAGE_SHIFT, PAGE_KERNEL_EXEC));
 
+	/* Figure out where the pmd page is, by reading the PGD, and converting
+	 * it to a virtual address. */
 	pmd_table = __va(pgd_pfn(cpu->lg->
 			pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX])
 								<< PAGE_SHIFT);
+	/* Now write it into the shadow page table. */
 	native_set_pmd(&pmd_table[SWITCHER_PMD_INDEX], switcher_pmd);
 #else
 	pgd_t switcher_pgd;
 
-	/* Make the last PGD entry for this Guest point to the Switcher's PTE
-	 * page for this CPU (with appropriate flags). */
+	/*
+	 * Make the last PGD entry for this Guest point to the Switcher's PTE
+	 * page for this CPU (with appropriate flags).
+	 */
 	switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL_EXEC);
 
 	cpu->lg->pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX] = switcher_pgd;
 
 #endif
-	/* We also change the Switcher PTE page.  When we're running the Guest,
+	/*
+	 * We also change the Switcher PTE page.  When we're running the Guest,
 	 * we want the Guest's "regs" page to appear where the first Switcher
 	 * page for this CPU is.  This is an optimization: when the Switcher
 	 * saves the Guest registers, it saves them into the first page of this
 	 * CPU's "struct lguest_pages": if we make sure the Guest's register
 	 * page is already mapped there, we don't have to copy them out
-	 * again. */
+	 * again.
+	 */
 	pfn = __pa(cpu->regs_page) >> PAGE_SHIFT;
 	native_set_pte(&regs_pte, pfn_pte(pfn, PAGE_KERNEL));
 	native_set_pte(&switcher_pte_page[pte_index((unsigned long)pages)],
@@ -1019,10 +1194,12 @@ static void free_switcher_pte_pages(void)
 		free_page((long)switcher_pte_page(i));
 }
 
-/*H:520 Setting up the Switcher PTE page for given CPU is fairly easy, given
+/*H:520
+ * Setting up the Switcher PTE page for given CPU is fairly easy, given
  * the CPU number and the "struct page"s for the Switcher code itself.
  *
- * Currently the Switcher is less than a page long, so "pages" is always 1. */
+ * Currently the Switcher is less than a page long, so "pages" is always 1.
+ */
 static __init void populate_switcher_pte_page(unsigned int cpu,
 					      struct page *switcher_page[],
 					      unsigned int pages)
@@ -1043,13 +1220,16 @@ static __init void populate_switcher_pte_page(unsigned int cpu,
 	native_set_pte(&pte[i], pfn_pte(page_to_pfn(switcher_page[i]),
 			 __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW)));
 
-	/* The second page contains the "struct lguest_ro_state", and is
-	 * read-only. */
+	/*
+	 * The second page contains the "struct lguest_ro_state", and is
+	 * read-only.
+	 */
 	native_set_pte(&pte[i+1], pfn_pte(page_to_pfn(switcher_page[i+1]),
 			   __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
 }
 
-/* We've made it through the page table code.  Perhaps our tired brains are
+/*
+ * We've made it through the page table code.  Perhaps our tired brains are
  * still processing the details, or perhaps we're simply glad it's over.
  *
  * If nothing else, note that all this complexity in juggling shadow page tables
@@ -1058,10 +1238,13 @@ static __init void populate_switcher_pte_page(unsigned int cpu,
  * uses exotic direct Guest pagetable manipulation, and why both Intel and AMD
  * have implemented shadow page table support directly into hardware.
  *
- * There is just one file remaining in the Host. */
+ * There is just one file remaining in the Host.
+ */
 
-/*H:510 At boot or module load time, init_pagetables() allocates and populates
- * the Switcher PTE page for each CPU. */
+/*H:510
+ * At boot or module load time, init_pagetables() allocates and populates
+ * the Switcher PTE page for each CPU.
+ */
 __init int init_pagetables(struct page **switcher_page, unsigned int pages)
 {
 	unsigned int i;
diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c
index 482ed5a1875..951c57b0a7e 100644
--- a/drivers/lguest/segments.c
+++ b/drivers/lguest/segments.c
@@ -1,4 +1,5 @@
-/*P:600 The x86 architecture has segments, which involve a table of descriptors
+/*P:600
+ * The x86 architecture has segments, which involve a table of descriptors
  * which can be used to do funky things with virtual address interpretation.
  * We originally used to use segments so the Guest couldn't alter the
  * Guest<->Host Switcher, and then we had to trim Guest segments, and restore
@@ -8,7 +9,8 @@
  *
  * In these modern times, the segment handling code consists of simple sanity
  * checks, and the worst you'll experience reading this code is butterfly-rash
- * from frolicking through its parklike serenity. :*/
+ * from frolicking through its parklike serenity.
+:*/
 #include "lg.h"
 
 /*H:600
@@ -41,10 +43,12 @@
  * begin.
  */
 
-/* There are several entries we don't let the Guest set.  The TSS entry is the
+/*
+ * There are several entries we don't let the Guest set.  The TSS entry is the
  * "Task State Segment" which controls all kinds of delicate things.  The
  * LGUEST_CS and LGUEST_DS entries are reserved for the Switcher, and the
- * the Guest can't be trusted to deal with double faults. */
+ * the Guest can't be trusted to deal with double faults.
+ */
 static bool ignored_gdt(unsigned int num)
 {
 	return (num == GDT_ENTRY_TSS
@@ -53,42 +57,52 @@ static bool ignored_gdt(unsigned int num)
 		|| num == GDT_ENTRY_DOUBLEFAULT_TSS);
 }
 
-/*H:630 Once the Guest gave us new GDT entries, we fix them up a little.  We
+/*H:630
+ * Once the Guest gave us new GDT entries, we fix them up a little.  We
  * don't care if they're invalid: the worst that can happen is a General
  * Protection Fault in the Switcher when it restores a Guest segment register
  * which tries to use that entry.  Then we kill the Guest for causing such a
- * mess: the message will be "unhandled trap 256". */
+ * mess: the message will be "unhandled trap 256".
+ */
 static void fixup_gdt_table(struct lg_cpu *cpu, unsigned start, unsigned end)
 {
 	unsigned int i;
 
 	for (i = start; i < end; i++) {
-		/* We never copy these ones to real GDT, so we don't care what
-		 * they say */
+		/*
+		 * We never copy these ones to real GDT, so we don't care what
+		 * they say
+		 */
 		if (ignored_gdt(i))
 			continue;
 
-		/* Segment descriptors contain a privilege level: the Guest is
+		/*
+		 * Segment descriptors contain a privilege level: the Guest is
 		 * sometimes careless and leaves this as 0, even though it's
-		 * running at privilege level 1.  If so, we fix it here. */
+		 * running at privilege level 1.  If so, we fix it here.
+		 */
 		if ((cpu->arch.gdt[i].b & 0x00006000) == 0)
 			cpu->arch.gdt[i].b |= (GUEST_PL << 13);
 
-		/* Each descriptor has an "accessed" bit.  If we don't set it
+		/*
+		 * Each descriptor has an "accessed" bit.  If we don't set it
 		 * now, the CPU will try to set it when the Guest first loads
 		 * that entry into a segment register.  But the GDT isn't
-		 * writable by the Guest, so bad things can happen. */
+		 * writable by the Guest, so bad things can happen.
+		 */
 		cpu->arch.gdt[i].b |= 0x00000100;
 	}
 }
 
-/*H:610 Like the IDT, we never simply use the GDT the Guest gives us.  We keep
+/*H:610
+ * Like the IDT, we never simply use the GDT the Guest gives us.  We keep
  * a GDT for each CPU, and copy across the Guest's entries each time we want to
  * run the Guest on that CPU.
  *
  * This routine is called at boot or modprobe time for each CPU to set up the
  * constant GDT entries: the ones which are the same no matter what Guest we're
- * running. */
+ * running.
+ */
 void setup_default_gdt_entries(struct lguest_ro_state *state)
 {
 	struct desc_struct *gdt = state->guest_gdt;
@@ -98,30 +112,37 @@ void setup_default_gdt_entries(struct lguest_ro_state *state)
 	gdt[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
 	gdt[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
 
-	/* The TSS segment refers to the TSS entry for this particular CPU.
+	/*
+	 * The TSS segment refers to the TSS entry for this particular CPU.
 	 * Forgive the magic flags: the 0x8900 means the entry is Present, it's
 	 * privilege level 0 Available 386 TSS system segment, and the 0x67
-	 * means Saturn is eclipsed by Mercury in the twelfth house. */
+	 * means Saturn is eclipsed by Mercury in the twelfth house.
+	 */
 	gdt[GDT_ENTRY_TSS].a = 0x00000067 | (tss << 16);
 	gdt[GDT_ENTRY_TSS].b = 0x00008900 | (tss & 0xFF000000)
 		| ((tss >> 16) & 0x000000FF);
 }
 
-/* This routine sets up the initial Guest GDT for booting.  All entries start
- * as 0 (unusable). */
+/*
+ * This routine sets up the initial Guest GDT for booting.  All entries start
+ * as 0 (unusable).
+ */
 void setup_guest_gdt(struct lg_cpu *cpu)
 {
-	/* Start with full 0-4G segments... */
+	/*
+	 * Start with full 0-4G segments...except the Guest is allowed to use
+	 * them, so set the privilege level appropriately in the flags.
+	 */
 	cpu->arch.gdt[GDT_ENTRY_KERNEL_CS] = FULL_EXEC_SEGMENT;
 	cpu->arch.gdt[GDT_ENTRY_KERNEL_DS] = FULL_SEGMENT;
-	/* ...except the Guest is allowed to use them, so set the privilege
-	 * level appropriately in the flags. */
 	cpu->arch.gdt[GDT_ENTRY_KERNEL_CS].b |= (GUEST_PL << 13);
 	cpu->arch.gdt[GDT_ENTRY_KERNEL_DS].b |= (GUEST_PL << 13);
 }
 
-/*H:650 An optimization of copy_gdt(), for just the three "thead-local storage"
- * entries. */
+/*H:650
+ * An optimization of copy_gdt(), for just the three "thead-local storage"
+ * entries.
+ */
 void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt)
 {
 	unsigned int i;
@@ -130,26 +151,34 @@ void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt)
 		gdt[i] = cpu->arch.gdt[i];
 }
 
-/*H:640 When the Guest is run on a different CPU, or the GDT entries have
- * changed, copy_gdt() is called to copy the Guest's GDT entries across to this
- * CPU's GDT. */
+/*H:640
+ * When the Guest is run on a different CPU, or the GDT entries have changed,
+ * copy_gdt() is called to copy the Guest's GDT entries across to this CPU's
+ * GDT.
+ */
 void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt)
 {
 	unsigned int i;
 
-	/* The default entries from setup_default_gdt_entries() are not
-	 * replaced.  See ignored_gdt() above. */
+	/*
+	 * The default entries from setup_default_gdt_entries() are not
+	 * replaced.  See ignored_gdt() above.
+	 */
 	for (i = 0; i < GDT_ENTRIES; i++)
 		if (!ignored_gdt(i))
 			gdt[i] = cpu->arch.gdt[i];
 }
 
-/*H:620 This is where the Guest asks us to load a new GDT entry
- * (LHCALL_LOAD_GDT_ENTRY).  We tweak the entry and copy it in. */
+/*H:620
+ * This is where the Guest asks us to load a new GDT entry
+ * (LHCALL_LOAD_GDT_ENTRY).  We tweak the entry and copy it in.
+ */
 void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
 {
-	/* We assume the Guest has the same number of GDT entries as the
-	 * Host, otherwise we'd have to dynamically allocate the Guest GDT. */
+	/*
+	 * We assume the Guest has the same number of GDT entries as the
+	 * Host, otherwise we'd have to dynamically allocate the Guest GDT.
+	 */
 	if (num >= ARRAY_SIZE(cpu->arch.gdt))
 		kill_guest(cpu, "too many gdt entries %i", num);
 
@@ -157,15 +186,19 @@ void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
 	cpu->arch.gdt[num].a = lo;
 	cpu->arch.gdt[num].b = hi;
 	fixup_gdt_table(cpu, num, num+1);
-	/* Mark that the GDT changed so the core knows it has to copy it again,
-	 * even if the Guest is run on the same CPU. */
+	/*
+	 * Mark that the GDT changed so the core knows it has to copy it again,
+	 * even if the Guest is run on the same CPU.
+	 */
 	cpu->changed |= CHANGED_GDT;
 }
 
-/* This is the fast-track version for just changing the three TLS entries.
+/*
+ * This is the fast-track version for just changing the three TLS entries.
  * Remember that this happens on every context switch, so it's worth
  * optimizing.  But wouldn't it be neater to have a single hypercall to cover
- * both cases? */
+ * both cases?
+ */
 void guest_load_tls(struct lg_cpu *cpu, unsigned long gtls)
 {
 	struct desc_struct *tls = &cpu->arch.gdt[GDT_ENTRY_TLS_MIN];
@@ -175,7 +208,6 @@ void guest_load_tls(struct lg_cpu *cpu, unsigned long gtls)
 	/* Note that just the TLS entries have changed. */
 	cpu->changed |= CHANGED_GDT_TLS;
 }
-/*:*/
 
 /*H:660
  * With this, we have finished the Host.
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index eaf722fe309..6ae388849a3 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -17,13 +17,15 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-/*P:450 This file contains the x86-specific lguest code.  It used to be all
+/*P:450
+ * This file contains the x86-specific lguest code.  It used to be all
  * mixed in with drivers/lguest/core.c but several foolhardy code slashers
  * wrestled most of the dependencies out to here in preparation for porting
  * lguest to other architectures (see what I mean by foolhardy?).
  *
  * This also contains a couple of non-obvious setup and teardown pieces which
- * were implemented after days of debugging pain. :*/
+ * were implemented after days of debugging pain.
+:*/
 #include <linux/kernel.h>
 #include <linux/start_kernel.h>
 #include <linux/string.h>
@@ -82,25 +84,33 @@ static DEFINE_PER_CPU(struct lg_cpu *, last_cpu);
  */
 static void copy_in_guest_info(struct lg_cpu *cpu, struct lguest_pages *pages)
 {
-	/* Copying all this data can be quite expensive.  We usually run the
+	/*
+	 * Copying all this data can be quite expensive.  We usually run the
 	 * same Guest we ran last time (and that Guest hasn't run anywhere else
 	 * meanwhile).  If that's not the case, we pretend everything in the
-	 * Guest has changed. */
+	 * Guest has changed.
+	 */
 	if (__get_cpu_var(last_cpu) != cpu || cpu->last_pages != pages) {
 		__get_cpu_var(last_cpu) = cpu;
 		cpu->last_pages = pages;
 		cpu->changed = CHANGED_ALL;
 	}
 
-	/* These copies are pretty cheap, so we do them unconditionally: */
-	/* Save the current Host top-level page directory. */
+	/*
+	 * These copies are pretty cheap, so we do them unconditionally: */
+	/* Save the current Host top-level page directory.
+	 */
 	pages->state.host_cr3 = __pa(current->mm->pgd);
-	/* Set up the Guest's page tables to see this CPU's pages (and no
-	 * other CPU's pages). */
+	/*
+	 * Set up the Guest's page tables to see this CPU's pages (and no
+	 * other CPU's pages).
+	 */
 	map_switcher_in_guest(cpu, pages);
-	/* Set up the two "TSS" members which tell the CPU what stack to use
+	/*
+	 * Set up the two "TSS" members which tell the CPU what stack to use
 	 * for traps which do directly into the Guest (ie. traps at privilege
-	 * level 1). */
+	 * level 1).
+	 */
 	pages->state.guest_tss.sp1 = cpu->esp1;
 	pages->state.guest_tss.ss1 = cpu->ss1;
 
@@ -125,97 +135,126 @@ static void run_guest_once(struct lg_cpu *cpu, struct lguest_pages *pages)
 	/* This is a dummy value we need for GCC's sake. */
 	unsigned int clobber;
 
-	/* Copy the guest-specific information into this CPU's "struct
-	 * lguest_pages". */
+	/*
+	 * Copy the guest-specific information into this CPU's "struct
+	 * lguest_pages".
+	 */
 	copy_in_guest_info(cpu, pages);
 
-	/* Set the trap number to 256 (impossible value).  If we fault while
+	/*
+	 * Set the trap number to 256 (impossible value).  If we fault while
 	 * switching to the Guest (bad segment registers or bug), this will
-	 * cause us to abort the Guest. */
+	 * cause us to abort the Guest.
+	 */
 	cpu->regs->trapnum = 256;
 
-	/* Now: we push the "eflags" register on the stack, then do an "lcall".
+	/*
+	 * Now: we push the "eflags" register on the stack, then do an "lcall".
 	 * This is how we change from using the kernel code segment to using
 	 * the dedicated lguest code segment, as well as jumping into the
 	 * Switcher.
 	 *
 	 * The lcall also pushes the old code segment (KERNEL_CS) onto the
 	 * stack, then the address of this call.  This stack layout happens to
-	 * exactly match the stack layout created by an interrupt... */
+	 * exactly match the stack layout created by an interrupt...
+	 */
 	asm volatile("pushf; lcall *lguest_entry"
-		     /* This is how we tell GCC that %eax ("a") and %ebx ("b")
-		      * are changed by this routine.  The "=" means output. */
+		     /*
+		      * This is how we tell GCC that %eax ("a") and %ebx ("b")
+		      * are changed by this routine.  The "=" means output.
+		      */
 		     : "=a"(clobber), "=b"(clobber)
-		     /* %eax contains the pages pointer.  ("0" refers to the
+		     /*
+		      * %eax contains the pages pointer.  ("0" refers to the
 		      * 0-th argument above, ie "a").  %ebx contains the
 		      * physical address of the Guest's top-level page
-		      * directory. */
+		      * directory.
+		      */
 		     : "0"(pages), "1"(__pa(cpu->lg->pgdirs[cpu->cpu_pgd].pgdir))
-		     /* We tell gcc that all these registers could change,
+		     /*
+		      * We tell gcc that all these registers could change,
 		      * which means we don't have to save and restore them in
-		      * the Switcher. */
+		      * the Switcher.
+		      */
 		     : "memory", "%edx", "%ecx", "%edi", "%esi");
 }
 /*:*/
 
-/*M:002 There are hooks in the scheduler which we can register to tell when we
+/*M:002
+ * There are hooks in the scheduler which we can register to tell when we
  * get kicked off the CPU (preempt_notifier_register()).  This would allow us
  * to lazily disable SYSENTER which would regain some performance, and should
  * also simplify copy_in_guest_info().  Note that we'd still need to restore
  * things when we exit to Launcher userspace, but that's fairly easy.
  *
- * We could also try using this hooks for PGE, but that might be too expensive.
+ * We could also try using these hooks for PGE, but that might be too expensive.
  *
- * The hooks were designed for KVM, but we can also put them to good use. :*/
+ * The hooks were designed for KVM, but we can also put them to good use.
+:*/
 
-/*H:040 This is the i386-specific code to setup and run the Guest.  Interrupts
- * are disabled: we own the CPU. */
+/*H:040
+ * This is the i386-specific code to setup and run the Guest.  Interrupts
+ * are disabled: we own the CPU.
+ */
 void lguest_arch_run_guest(struct lg_cpu *cpu)
 {
-	/* Remember the awfully-named TS bit?  If the Guest has asked to set it
+	/*
+	 * Remember the awfully-named TS bit?  If the Guest has asked to set it
 	 * we set it now, so we can trap and pass that trap to the Guest if it
-	 * uses the FPU. */
+	 * uses the FPU.
+	 */
 	if (cpu->ts)
 		unlazy_fpu(current);
 
-	/* SYSENTER is an optimized way of doing system calls.  We can't allow
+	/*
+	 * SYSENTER is an optimized way of doing system calls.  We can't allow
 	 * it because it always jumps to privilege level 0.  A normal Guest
 	 * won't try it because we don't advertise it in CPUID, but a malicious
 	 * Guest (or malicious Guest userspace program) could, so we tell the
-	 * CPU to disable it before running the Guest. */
+	 * CPU to disable it before running the Guest.
+	 */
 	if (boot_cpu_has(X86_FEATURE_SEP))
 		wrmsr(MSR_IA32_SYSENTER_CS, 0, 0);
 
-	/* Now we actually run the Guest.  It will return when something
+	/*
+	 * Now we actually run the Guest.  It will return when something
 	 * interesting happens, and we can examine its registers to see what it
-	 * was doing. */
+	 * was doing.
+	 */
 	run_guest_once(cpu, lguest_pages(raw_smp_processor_id()));
 
-	/* Note that the "regs" structure contains two extra entries which are
+	/*
+	 * Note that the "regs" structure contains two extra entries which are
 	 * not really registers: a trap number which says what interrupt or
 	 * trap made the switcher code come back, and an error code which some
-	 * traps set.  */
+	 * traps set.
+	 */
 
 	 /* Restore SYSENTER if it's supposed to be on. */
 	 if (boot_cpu_has(X86_FEATURE_SEP))
 		wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
 
-	/* If the Guest page faulted, then the cr2 register will tell us the
+	/*
+	 * If the Guest page faulted, then the cr2 register will tell us the
 	 * bad virtual address.  We have to grab this now, because once we
 	 * re-enable interrupts an interrupt could fault and thus overwrite
-	 * cr2, or we could even move off to a different CPU. */
+	 * cr2, or we could even move off to a different CPU.
+	 */
 	if (cpu->regs->trapnum == 14)
 		cpu->arch.last_pagefault = read_cr2();
-	/* Similarly, if we took a trap because the Guest used the FPU,
+	/*
+	 * Similarly, if we took a trap because the Guest used the FPU,
 	 * we have to restore the FPU it expects to see.
 	 * math_state_restore() may sleep and we may even move off to
 	 * a different CPU. So all the critical stuff should be done
-	 * before this.  */
+	 * before this.
+	 */
 	else if (cpu->regs->trapnum == 7)
 		math_state_restore();
 }
 
-/*H:130 Now we've examined the hypercall code; our Guest can make requests.
+/*H:130
+ * Now we've examined the hypercall code; our Guest can make requests.
  * Our Guest is usually so well behaved; it never tries to do things it isn't
  * allowed to, and uses hypercalls instead.  Unfortunately, Linux's paravirtual
  * infrastructure isn't quite complete, because it doesn't contain replacements
@@ -225,26 +264,33 @@ void lguest_arch_run_guest(struct lg_cpu *cpu)
  *
  * When the Guest uses one of these instructions, we get a trap (General
  * Protection Fault) and come here.  We see if it's one of those troublesome
- * instructions and skip over it.  We return true if we did. */
+ * instructions and skip over it.  We return true if we did.
+ */
 static int emulate_insn(struct lg_cpu *cpu)
 {
 	u8 insn;
 	unsigned int insnlen = 0, in = 0, shift = 0;
-	/* The eip contains the *virtual* address of the Guest's instruction:
-	 * guest_pa just subtracts the Guest's page_offset. */
+	/*
+	 * The eip contains the *virtual* address of the Guest's instruction:
+	 * guest_pa just subtracts the Guest's page_offset.
+	 */
 	unsigned long physaddr = guest_pa(cpu, cpu->regs->eip);
 
-	/* This must be the Guest kernel trying to do something, not userspace!
+	/*
+	 * This must be the Guest kernel trying to do something, not userspace!
 	 * The bottom two bits of the CS segment register are the privilege
-	 * level. */
+	 * level.
+	 */
 	if ((cpu->regs->cs & 3) != GUEST_PL)
 		return 0;
 
 	/* Decoding x86 instructions is icky. */
 	insn = lgread(cpu, physaddr, u8);
 
-	/* 0x66 is an "operand prefix".  It means it's using the upper 16 bits
-	   of the eax register. */
+	/*
+	 * 0x66 is an "operand prefix".  It means it's using the upper 16 bits
+	 * of the eax register.
+	 */
 	if (insn == 0x66) {
 		shift = 16;
 		/* The instruction is 1 byte so far, read the next byte. */
@@ -252,8 +298,10 @@ static int emulate_insn(struct lg_cpu *cpu)
 		insn = lgread(cpu, physaddr + insnlen, u8);
 	}
 
-	/* We can ignore the lower bit for the moment and decode the 4 opcodes
-	 * we need to emulate. */
+	/*
+	 * We can ignore the lower bit for the moment and decode the 4 opcodes
+	 * we need to emulate.
+	 */
 	switch (insn & 0xFE) {
 	case 0xE4: /* in     <next byte>,%al */
 		insnlen += 2;
@@ -274,9 +322,11 @@ static int emulate_insn(struct lg_cpu *cpu)
 		return 0;
 	}
 
-	/* If it was an "IN" instruction, they expect the result to be read
+	/*
+	 * If it was an "IN" instruction, they expect the result to be read
 	 * into %eax, so we change %eax.  We always return all-ones, which
-	 * traditionally means "there's nothing there". */
+	 * traditionally means "there's nothing there".
+	 */
 	if (in) {
 		/* Lower bit tells is whether it's a 16 or 32 bit access */
 		if (insn & 0x1)
@@ -290,7 +340,8 @@ static int emulate_insn(struct lg_cpu *cpu)
 	return 1;
 }
 
-/* Our hypercalls mechanism used to be based on direct software interrupts.
+/*
+ * Our hypercalls mechanism used to be based on direct software interrupts.
  * After Anthony's "Refactor hypercall infrastructure" kvm patch, we decided to
  * change over to using kvm hypercalls.
  *
@@ -318,16 +369,20 @@ static int emulate_insn(struct lg_cpu *cpu)
  */
 static void rewrite_hypercall(struct lg_cpu *cpu)
 {
-	/* This are the opcodes we use to patch the Guest.  The opcode for "int
+	/*
+	 * This are the opcodes we use to patch the Guest.  The opcode for "int
 	 * $0x1f" is "0xcd 0x1f" but vmcall instruction is 3 bytes long, so we
-	 * complete the sequence with a NOP (0x90). */
+	 * complete the sequence with a NOP (0x90).
+	 */
 	u8 insn[3] = {0xcd, 0x1f, 0x90};
 
 	__lgwrite(cpu, guest_pa(cpu, cpu->regs->eip), insn, sizeof(insn));
-	/* The above write might have caused a copy of that page to be made
+	/*
+	 * The above write might have caused a copy of that page to be made
 	 * (if it was read-only).  We need to make sure the Guest has
 	 * up-to-date pagetables.  As this doesn't happen often, we can just
-	 * drop them all. */
+	 * drop them all.
+	 */
 	guest_pagetable_clear_all(cpu);
 }
 
@@ -335,9 +390,11 @@ static bool is_hypercall(struct lg_cpu *cpu)
 {
 	u8 insn[3];
 
-	/* This must be the Guest kernel trying to do something.
+	/*
+	 * This must be the Guest kernel trying to do something.
 	 * The bottom two bits of the CS segment register are the privilege
-	 * level. */
+	 * level.
+	 */
 	if ((cpu->regs->cs & 3) != GUEST_PL)
 		return false;
 
@@ -351,86 +408,105 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu)
 {
 	switch (cpu->regs->trapnum) {
 	case 13: /* We've intercepted a General Protection Fault. */
-		/* Check if this was one of those annoying IN or OUT
+		/*
+		 * Check if this was one of those annoying IN or OUT
 		 * instructions which we need to emulate.  If so, we just go
-		 * back into the Guest after we've done it. */
+		 * back into the Guest after we've done it.
+		 */
 		if (cpu->regs->errcode == 0) {
 			if (emulate_insn(cpu))
 				return;
 		}
-		/* If KVM is active, the vmcall instruction triggers a
-		 * General Protection Fault.  Normally it triggers an
-		 * invalid opcode fault (6): */
+		/*
+		 * If KVM is active, the vmcall instruction triggers a General
+		 * Protection Fault.  Normally it triggers an invalid opcode
+		 * fault (6):
+		 */
 	case 6:
-		/* We need to check if ring == GUEST_PL and
-		 * faulting instruction == vmcall. */
+		/*
+		 * We need to check if ring == GUEST_PL and faulting
+		 * instruction == vmcall.
+		 */
 		if (is_hypercall(cpu)) {
 			rewrite_hypercall(cpu);
 			return;
 		}
 		break;
 	case 14: /* We've intercepted a Page Fault. */
-		/* The Guest accessed a virtual address that wasn't mapped.
+		/*
+		 * The Guest accessed a virtual address that wasn't mapped.
 		 * This happens a lot: we don't actually set up most of the page
 		 * tables for the Guest at all when we start: as it runs it asks
 		 * for more and more, and we set them up as required. In this
 		 * case, we don't even tell the Guest that the fault happened.
 		 *
 		 * The errcode tells whether this was a read or a write, and
-		 * whether kernel or userspace code. */
+		 * whether kernel or userspace code.
+		 */
 		if (demand_page(cpu, cpu->arch.last_pagefault,
 				cpu->regs->errcode))
 			return;
 
-		/* OK, it's really not there (or not OK): the Guest needs to
+		/*
+		 * OK, it's really not there (or not OK): the Guest needs to
 		 * know.  We write out the cr2 value so it knows where the
 		 * fault occurred.
 		 *
 		 * Note that if the Guest were really messed up, this could
 		 * happen before it's done the LHCALL_LGUEST_INIT hypercall, so
-		 * lg->lguest_data could be NULL */
+		 * lg->lguest_data could be NULL
+		 */
 		if (cpu->lg->lguest_data &&
 		    put_user(cpu->arch.last_pagefault,
 			     &cpu->lg->lguest_data->cr2))
 			kill_guest(cpu, "Writing cr2");
 		break;
 	case 7: /* We've intercepted a Device Not Available fault. */
-		/* If the Guest doesn't want to know, we already restored the
-		 * Floating Point Unit, so we just continue without telling
-		 * it. */
+		/*
+		 * If the Guest doesn't want to know, we already restored the
+		 * Floating Point Unit, so we just continue without telling it.
+		 */
 		if (!cpu->ts)
 			return;
 		break;
 	case 32 ... 255:
-		/* These values mean a real interrupt occurred, in which case
+		/*
+		 * These values mean a real interrupt occurred, in which case
 		 * the Host handler has already been run. We just do a
 		 * friendly check if another process should now be run, then
-		 * return to run the Guest again */
+		 * return to run the Guest again
+		 */
 		cond_resched();
 		return;
 	case LGUEST_TRAP_ENTRY:
-		/* Our 'struct hcall_args' maps directly over our regs: we set
-		 * up the pointer now to indicate a hypercall is pending. */
+		/*
+		 * Our 'struct hcall_args' maps directly over our regs: we set
+		 * up the pointer now to indicate a hypercall is pending.
+		 */
 		cpu->hcall = (struct hcall_args *)cpu->regs;
 		return;
 	}
 
 	/* We didn't handle the trap, so it needs to go to the Guest. */
 	if (!deliver_trap(cpu, cpu->regs->trapnum))
-		/* If the Guest doesn't have a handler (either it hasn't
+		/*
+		 * If the Guest doesn't have a handler (either it hasn't
 		 * registered any yet, or it's one of the faults we don't let
-		 * it handle), it dies with this cryptic error message. */
+		 * it handle), it dies with this cryptic error message.
+		 */
 		kill_guest(cpu, "unhandled trap %li at %#lx (%#lx)",
 			   cpu->regs->trapnum, cpu->regs->eip,
 			   cpu->regs->trapnum == 14 ? cpu->arch.last_pagefault
 			   : cpu->regs->errcode);
 }
 
-/* Now we can look at each of the routines this calls, in increasing order of
+/*
+ * Now we can look at each of the routines this calls, in increasing order of
  * complexity: do_hypercalls(), emulate_insn(), maybe_do_interrupt(),
  * deliver_trap() and demand_page().  After all those, we'll be ready to
  * examine the Switcher, and our philosophical understanding of the Host/Guest
- * duality will be complete. :*/
+ * duality will be complete.
+:*/
 static void adjust_pge(void *on)
 {
 	if (on)
@@ -439,13 +515,16 @@ static void adjust_pge(void *on)
 		write_cr4(read_cr4() & ~X86_CR4_PGE);
 }
 
-/*H:020 Now the Switcher is mapped and every thing else is ready, we need to do
- * some more i386-specific initialization. */
+/*H:020
+ * Now the Switcher is mapped and every thing else is ready, we need to do
+ * some more i386-specific initialization.
+ */
 void __init lguest_arch_host_init(void)
 {
 	int i;
 
-	/* Most of the i386/switcher.S doesn't care that it's been moved; on
+	/*
+	 * Most of the i386/switcher.S doesn't care that it's been moved; on
 	 * Intel, jumps are relative, and it doesn't access any references to
 	 * external code or data.
 	 *
@@ -453,7 +532,8 @@ void __init lguest_arch_host_init(void)
 	 * addresses are placed in a table (default_idt_entries), so we need to
 	 * update the table with the new addresses.  switcher_offset() is a
 	 * convenience function which returns the distance between the
-	 * compiled-in switcher code and the high-mapped copy we just made. */
+	 * compiled-in switcher code and the high-mapped copy we just made.
+	 */
 	for (i = 0; i < IDT_ENTRIES; i++)
 		default_idt_entries[i] += switcher_offset();
 
@@ -468,63 +548,81 @@ void __init lguest_arch_host_init(void)
 	for_each_possible_cpu(i) {
 		/* lguest_pages() returns this CPU's two pages. */
 		struct lguest_pages *pages = lguest_pages(i);
-		/* This is a convenience pointer to make the code fit one
-		 * statement to a line. */
+		/* This is a convenience pointer to make the code neater. */
 		struct lguest_ro_state *state = &pages->state;
 
-		/* The Global Descriptor Table: the Host has a different one
+		/*
+		 * The Global Descriptor Table: the Host has a different one
 		 * for each CPU.  We keep a descriptor for the GDT which says
 		 * where it is and how big it is (the size is actually the last
-		 * byte, not the size, hence the "-1"). */
+		 * byte, not the size, hence the "-1").
+		 */
 		state->host_gdt_desc.size = GDT_SIZE-1;
 		state->host_gdt_desc.address = (long)get_cpu_gdt_table(i);
 
-		/* All CPUs on the Host use the same Interrupt Descriptor
+		/*
+		 * All CPUs on the Host use the same Interrupt Descriptor
 		 * Table, so we just use store_idt(), which gets this CPU's IDT
-		 * descriptor. */
+		 * descriptor.
+		 */
 		store_idt(&state->host_idt_desc);
 
-		/* The descriptors for the Guest's GDT and IDT can be filled
+		/*
+		 * The descriptors for the Guest's GDT and IDT can be filled
 		 * out now, too.  We copy the GDT & IDT into ->guest_gdt and
-		 * ->guest_idt before actually running the Guest. */
+		 * ->guest_idt before actually running the Guest.
+		 */
 		state->guest_idt_desc.size = sizeof(state->guest_idt)-1;
 		state->guest_idt_desc.address = (long)&state->guest_idt;
 		state->guest_gdt_desc.size = sizeof(state->guest_gdt)-1;
 		state->guest_gdt_desc.address = (long)&state->guest_gdt;
 
-		/* We know where we want the stack to be when the Guest enters
+		/*
+		 * We know where we want the stack to be when the Guest enters
 		 * the Switcher: in pages->regs.  The stack grows upwards, so
-		 * we start it at the end of that structure. */
+		 * we start it at the end of that structure.
+		 */
 		state->guest_tss.sp0 = (long)(&pages->regs + 1);
-		/* And this is the GDT entry to use for the stack: we keep a
-		 * couple of special LGUEST entries. */
+		/*
+		 * And this is the GDT entry to use for the stack: we keep a
+		 * couple of special LGUEST entries.
+		 */
 		state->guest_tss.ss0 = LGUEST_DS;
 
-		/* x86 can have a finegrained bitmap which indicates what I/O
+		/*
+		 * x86 can have a finegrained bitmap which indicates what I/O
 		 * ports the process can use.  We set it to the end of our
-		 * structure, meaning "none". */
+		 * structure, meaning "none".
+		 */
 		state->guest_tss.io_bitmap_base = sizeof(state->guest_tss);
 
-		/* Some GDT entries are the same across all Guests, so we can
-		 * set them up now. */
+		/*
+		 * Some GDT entries are the same across all Guests, so we can
+		 * set them up now.
+		 */
 		setup_default_gdt_entries(state);
 		/* Most IDT entries are the same for all Guests, too.*/
 		setup_default_idt_entries(state, default_idt_entries);
 
-		/* The Host needs to be able to use the LGUEST segments on this
-		 * CPU, too, so put them in the Host GDT. */
+		/*
+		 * The Host needs to be able to use the LGUEST segments on this
+		 * CPU, too, so put them in the Host GDT.
+		 */
 		get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
 		get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
 	}
 
-	/* In the Switcher, we want the %cs segment register to use the
+	/*
+	 * In the Switcher, we want the %cs segment register to use the
 	 * LGUEST_CS GDT entry: we've put that in the Host and Guest GDTs, so
 	 * it will be undisturbed when we switch.  To change %cs and jump we
-	 * need this structure to feed to Intel's "lcall" instruction. */
+	 * need this structure to feed to Intel's "lcall" instruction.
+	 */
 	lguest_entry.offset = (long)switch_to_guest + switcher_offset();
 	lguest_entry.segment = LGUEST_CS;
 
-	/* Finally, we need to turn off "Page Global Enable".  PGE is an
+	/*
+	 * Finally, we need to turn off "Page Global Enable".  PGE is an
 	 * optimization where page table entries are specially marked to show
 	 * they never change.  The Host kernel marks all the kernel pages this
 	 * way because it's always present, even when userspace is running.
@@ -534,16 +632,21 @@ void __init lguest_arch_host_init(void)
 	 * you'll get really weird bugs that you'll chase for two days.
 	 *
 	 * I used to turn PGE off every time we switched to the Guest and back
-	 * on when we return, but that slowed the Switcher down noticibly. */
+	 * on when we return, but that slowed the Switcher down noticibly.
+	 */
 
-	/* We don't need the complexity of CPUs coming and going while we're
-	 * doing this. */
+	/*
+	 * We don't need the complexity of CPUs coming and going while we're
+	 * doing this.
+	 */
 	get_online_cpus();
 	if (cpu_has_pge) { /* We have a broader idea of "global". */
 		/* Remember that this was originally set (for cleanup). */
 		cpu_had_pge = 1;
-		/* adjust_pge is a helper function which sets or unsets the PGE
-		 * bit on its CPU, depending on the argument (0 == unset). */
+		/*
+		 * adjust_pge is a helper function which sets or unsets the PGE
+		 * bit on its CPU, depending on the argument (0 == unset).
+		 */
 		on_each_cpu(adjust_pge, (void *)0, 1);
 		/* Turn off the feature in the global feature set. */
 		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PGE);
@@ -590,26 +693,32 @@ int lguest_arch_init_hypercalls(struct lg_cpu *cpu)
 {
 	u32 tsc_speed;
 
-	/* The pointer to the Guest's "struct lguest_data" is the only argument.
-	 * We check that address now. */
+	/*
+	 * The pointer to the Guest's "struct lguest_data" is the only argument.
+	 * We check that address now.
+	 */
 	if (!lguest_address_ok(cpu->lg, cpu->hcall->arg1,
 			       sizeof(*cpu->lg->lguest_data)))
 		return -EFAULT;
 
-	/* Having checked it, we simply set lg->lguest_data to point straight
+	/*
+	 * Having checked it, we simply set lg->lguest_data to point straight
 	 * into the Launcher's memory at the right place and then use
 	 * copy_to_user/from_user from now on, instead of lgread/write.  I put
 	 * this in to show that I'm not immune to writing stupid
-	 * optimizations. */
+	 * optimizations.
+	 */
 	cpu->lg->lguest_data = cpu->lg->mem_base + cpu->hcall->arg1;
 
-	/* We insist that the Time Stamp Counter exist and doesn't change with
+	/*
+	 * We insist that the Time Stamp Counter exist and doesn't change with
 	 * cpu frequency.  Some devious chip manufacturers decided that TSC
 	 * changes could be handled in software.  I decided that time going
 	 * backwards might be good for benchmarks, but it's bad for users.
 	 *
 	 * We also insist that the TSC be stable: the kernel detects unreliable
-	 * TSCs for its own purposes, and we use that here. */
+	 * TSCs for its own purposes, and we use that here.
+	 */
 	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) && !check_tsc_unstable())
 		tsc_speed = tsc_khz;
 	else
@@ -625,38 +734,47 @@ int lguest_arch_init_hypercalls(struct lg_cpu *cpu)
 }
 /*:*/
 
-/*L:030 lguest_arch_setup_regs()
+/*L:030
+ * lguest_arch_setup_regs()
  *
  * Most of the Guest's registers are left alone: we used get_zeroed_page() to
- * allocate the structure, so they will be 0. */
+ * allocate the structure, so they will be 0.
+ */
 void lguest_arch_setup_regs(struct lg_cpu *cpu, unsigned long start)
 {
 	struct lguest_regs *regs = cpu->regs;
 
-	/* There are four "segment" registers which the Guest needs to boot:
+	/*
+	 * There are four "segment" registers which the Guest needs to boot:
 	 * The "code segment" register (cs) refers to the kernel code segment
 	 * __KERNEL_CS, and the "data", "extra" and "stack" segment registers
 	 * refer to the kernel data segment __KERNEL_DS.
 	 *
 	 * The privilege level is packed into the lower bits.  The Guest runs
-	 * at privilege level 1 (GUEST_PL).*/
+	 * at privilege level 1 (GUEST_PL).
+	 */
 	regs->ds = regs->es = regs->ss = __KERNEL_DS|GUEST_PL;
 	regs->cs = __KERNEL_CS|GUEST_PL;
 
-	/* The "eflags" register contains miscellaneous flags.  Bit 1 (0x002)
+	/*
+	 * The "eflags" register contains miscellaneous flags.  Bit 1 (0x002)
 	 * is supposed to always be "1".  Bit 9 (0x200) controls whether
 	 * interrupts are enabled.  We always leave interrupts enabled while
-	 * running the Guest. */
+	 * running the Guest.
+	 */
 	regs->eflags = X86_EFLAGS_IF | 0x2;
 
-	/* The "Extended Instruction Pointer" register says where the Guest is
-	 * running. */
+	/*
+	 * The "Extended Instruction Pointer" register says where the Guest is
+	 * running.
+	 */
 	regs->eip = start;
 
-	/* %esi points to our boot information, at physical address 0, so don't
-	 * touch it. */
+	/*
+	 * %esi points to our boot information, at physical address 0, so don't
+	 * touch it.
+	 */
 
-	/* There are a couple of GDT entries the Guest expects when first
-	 * booting. */
+	/* There are a couple of GDT entries the Guest expects at boot. */
 	setup_guest_gdt(cpu);
 }
diff --git a/drivers/lguest/x86/switcher_32.S b/drivers/lguest/x86/switcher_32.S
index 3fc15318a80..40634b0db9f 100644
--- a/drivers/lguest/x86/switcher_32.S
+++ b/drivers/lguest/x86/switcher_32.S
@@ -1,12 +1,15 @@
-/*P:900 This is the Switcher: code which sits at 0xFFC00000 astride both the
- * Host and Guest to do the low-level Guest<->Host switch.  It is as simple as
- * it can be made, but it's naturally very specific to x86.
+/*P:900
+ * This is the Switcher: code which sits at 0xFFC00000 (or 0xFFE00000) astride
+ * both the Host and Guest to do the low-level Guest<->Host switch.  It is as
+ * simple as it can be made, but it's naturally very specific to x86.
  *
  * You have now completed Preparation.  If this has whet your appetite; if you
  * are feeling invigorated and refreshed then the next, more challenging stage
- * can be found in "make Guest". :*/
+ * can be found in "make Guest".
+ :*/
 
-/*M:012 Lguest is meant to be simple: my rule of thumb is that 1% more LOC must
+/*M:012
+ * Lguest is meant to be simple: my rule of thumb is that 1% more LOC must
  * gain at least 1% more performance.  Since neither LOC nor performance can be
  * measured beforehand, it generally means implementing a feature then deciding
  * if it's worth it.  And once it's implemented, who can say no?
@@ -31,11 +34,14 @@
  * Host (which is actually really easy).
  *
  * Two questions remain.  Would the performance gain outweigh the complexity?
- * And who would write the verse documenting it? :*/
+ * And who would write the verse documenting it?
+:*/
 
-/*M:011 Lguest64 handles NMI.  This gave me NMI envy (until I looked at their
+/*M:011
+ * Lguest64 handles NMI.  This gave me NMI envy (until I looked at their
  * code).  It's worth doing though, since it would let us use oprofile in the
- * Host when a Guest is running. :*/
+ * Host when a Guest is running.
+:*/
 
 /*S:100
  * Welcome to the Switcher itself!
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 6e149f4a1ff..a0f68386c12 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -378,6 +378,17 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
 	dev->ofdev.dev.bus = &macio_bus_type;
 	dev->ofdev.dev.release = macio_release_dev;
 
+#ifdef CONFIG_PCI
+	/* Set the DMA ops to the ones from the PCI device, this could be
+	 * fishy if we didn't know that on PowerMac it's always direct ops
+	 * or iommu ops that will work fine
+	 */
+	dev->ofdev.dev.archdata.dma_ops =
+		chip->lbus.pdev->dev.archdata.dma_ops;
+	dev->ofdev.dev.archdata.dma_data =
+		chip->lbus.pdev->dev.archdata.dma_data;
+#endif /* CONFIG_PCI */
+
 #ifdef DEBUG
 	printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n",
 	       dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj);
diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c
index 4d686c0bdea..9ab5b0c34f0 100644
--- a/drivers/macintosh/via-maciisi.c
+++ b/drivers/macintosh/via-maciisi.c
@@ -288,7 +288,7 @@ static void maciisi_sync(struct adb_request *req)
 	}
 	/* This could be BAD... when the ADB controller doesn't respond
 	 * for this long, it's probably not coming back :-( */
-	if(count >= 50) /* Hopefully shouldn't happen */
+	if (count > 50) /* Hopefully shouldn't happen */
 		printk(KERN_ERR "maciisi_send_request: poll timed out!\n");
 }
 
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 9933eb861c7..ed103816401 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -776,7 +776,7 @@ static void kcryptd_crypt_write_convert(struct dm_crypt_io *io)
 		 * But don't wait if split was due to the io size restriction
 		 */
 		if (unlikely(out_of_pages))
-			congestion_wait(WRITE, HZ/100);
+			congestion_wait(BLK_RW_ASYNC, HZ/100);
 
 		/*
 		 * With async crypto it is unsafe to share the crypto context
@@ -1318,7 +1318,7 @@ static int crypt_iterate_devices(struct dm_target *ti,
 {
 	struct crypt_config *cc = ti->private;
 
-	return fn(ti, cc->dev, cc->start, data);
+	return fn(ti, cc->dev, cc->start, ti->len, data);
 }
 
 static struct target_type crypt_target = {
diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c
index 4e5b843cd4d..ebe7381f47c 100644
--- a/drivers/md/dm-delay.c
+++ b/drivers/md/dm-delay.c
@@ -324,12 +324,12 @@ static int delay_iterate_devices(struct dm_target *ti,
 	struct delay_c *dc = ti->private;
 	int ret = 0;
 
-	ret = fn(ti, dc->dev_read, dc->start_read, data);
+	ret = fn(ti, dc->dev_read, dc->start_read, ti->len, data);
 	if (ret)
 		goto out;
 
 	if (dc->dev_write)
-		ret = fn(ti, dc->dev_write, dc->start_write, data);
+		ret = fn(ti, dc->dev_write, dc->start_write, ti->len, data);
 
 out:
 	return ret;
diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c
index c3ae51584b1..556acff3952 100644
--- a/drivers/md/dm-exception-store.c
+++ b/drivers/md/dm-exception-store.c
@@ -171,6 +171,14 @@ static int set_chunk_size(struct dm_exception_store *store,
 	 */
 	chunk_size_ulong = round_up(chunk_size_ulong, PAGE_SIZE >> 9);
 
+	return dm_exception_store_set_chunk_size(store, chunk_size_ulong,
+						 error);
+}
+
+int dm_exception_store_set_chunk_size(struct dm_exception_store *store,
+				      unsigned long chunk_size_ulong,
+				      char **error)
+{
 	/* Check chunk_size is a power of 2 */
 	if (!is_power_of_2(chunk_size_ulong)) {
 		*error = "Chunk size is not a power of 2";
@@ -183,6 +191,11 @@ static int set_chunk_size(struct dm_exception_store *store,
 		return -EINVAL;
 	}
 
+	if (chunk_size_ulong > INT_MAX >> SECTOR_SHIFT) {
+		*error = "Chunk size is too high";
+		return -EINVAL;
+	}
+
 	store->chunk_size = chunk_size_ulong;
 	store->chunk_mask = chunk_size_ulong - 1;
 	store->chunk_shift = ffs(chunk_size_ulong) - 1;
@@ -195,7 +208,7 @@ int dm_exception_store_create(struct dm_target *ti, int argc, char **argv,
 			      struct dm_exception_store **store)
 {
 	int r = 0;
-	struct dm_exception_store_type *type;
+	struct dm_exception_store_type *type = NULL;
 	struct dm_exception_store *tmp_store;
 	char persistent;
 
@@ -211,12 +224,15 @@ int dm_exception_store_create(struct dm_target *ti, int argc, char **argv,
 	}
 
 	persistent = toupper(*argv[1]);
-	if (persistent != 'P' && persistent != 'N') {
+	if (persistent == 'P')
+		type = get_type("P");
+	else if (persistent == 'N')
+		type = get_type("N");
+	else {
 		ti->error = "Persistent flag is not P or N";
 		return -EINVAL;
 	}
 
-	type = get_type(&persistent);
 	if (!type) {
 		ti->error = "Exception store type not recognised";
 		r = -EINVAL;
diff --git a/drivers/md/dm-exception-store.h b/drivers/md/dm-exception-store.h
index 2442c8c0789..812c71872ba 100644
--- a/drivers/md/dm-exception-store.h
+++ b/drivers/md/dm-exception-store.h
@@ -168,6 +168,10 @@ static inline chunk_t sector_to_chunk(struct dm_exception_store *store,
 int dm_exception_store_type_register(struct dm_exception_store_type *type);
 int dm_exception_store_type_unregister(struct dm_exception_store_type *type);
 
+int dm_exception_store_set_chunk_size(struct dm_exception_store *store,
+				      unsigned long chunk_size_ulong,
+				      char **error);
+
 int dm_exception_store_create(struct dm_target *ti, int argc, char **argv,
 			      unsigned *args_used,
 			      struct dm_exception_store **store);
diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index 9184b6deb86..82f7d6e6b1e 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -139,7 +139,7 @@ static int linear_iterate_devices(struct dm_target *ti,
 {
 	struct linear_c *lc = ti->private;
 
-	return fn(ti, lc->dev, lc->start, data);
+	return fn(ti, lc->dev, lc->start, ti->len, data);
 }
 
 static struct target_type linear_target = {
diff --git a/drivers/md/dm-log-userspace-base.c b/drivers/md/dm-log-userspace-base.c
index e69b9656099..6e186b1a062 100644
--- a/drivers/md/dm-log-userspace-base.c
+++ b/drivers/md/dm-log-userspace-base.c
@@ -21,6 +21,7 @@ struct log_c {
 	struct dm_target *ti;
 	uint32_t region_size;
 	region_t region_count;
+	uint64_t luid;
 	char uuid[DM_UUID_LEN];
 
 	char *usr_argv_str;
@@ -63,7 +64,7 @@ static int userspace_do_request(struct log_c *lc, const char *uuid,
 	 * restored.
 	 */
 retry:
-	r = dm_consult_userspace(uuid, request_type, data,
+	r = dm_consult_userspace(uuid, lc->luid, request_type, data,
 				 data_size, rdata, rdata_size);
 
 	if (r != -ESRCH)
@@ -74,14 +75,15 @@ retry:
 		set_current_state(TASK_INTERRUPTIBLE);
 		schedule_timeout(2*HZ);
 		DMWARN("Attempting to contact userspace log server...");
-		r = dm_consult_userspace(uuid, DM_ULOG_CTR, lc->usr_argv_str,
+		r = dm_consult_userspace(uuid, lc->luid, DM_ULOG_CTR,
+					 lc->usr_argv_str,
 					 strlen(lc->usr_argv_str) + 1,
 					 NULL, NULL);
 		if (!r)
 			break;
 	}
 	DMINFO("Reconnected to userspace log server... DM_ULOG_CTR complete");
-	r = dm_consult_userspace(uuid, DM_ULOG_RESUME, NULL,
+	r = dm_consult_userspace(uuid, lc->luid, DM_ULOG_RESUME, NULL,
 				 0, NULL, NULL);
 	if (!r)
 		goto retry;
@@ -111,10 +113,9 @@ static int build_constructor_string(struct dm_target *ti,
 		return -ENOMEM;
 	}
 
-	for (i = 0, str_size = 0; i < argc; i++)
-		str_size += sprintf(str + str_size, "%s ", argv[i]);
-	str_size += sprintf(str + str_size, "%llu",
-			    (unsigned long long)ti->len);
+	str_size = sprintf(str, "%llu", (unsigned long long)ti->len);
+	for (i = 0; i < argc; i++)
+		str_size += sprintf(str + str_size, " %s", argv[i]);
 
 	*ctr_str = str;
 	return str_size;
@@ -154,6 +155,9 @@ static int userspace_ctr(struct dm_dirty_log *log, struct dm_target *ti,
 		return -ENOMEM;
 	}
 
+	/* The ptr value is sufficient for local unique id */
+	lc->luid = (uint64_t)lc;
+
 	lc->ti = ti;
 
 	if (strlen(argv[0]) > (DM_UUID_LEN - 1)) {
@@ -173,7 +177,7 @@ static int userspace_ctr(struct dm_dirty_log *log, struct dm_target *ti,
 	}
 
 	/* Send table string */
-	r = dm_consult_userspace(lc->uuid, DM_ULOG_CTR,
+	r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_CTR,
 				 ctr_str, str_size, NULL, NULL);
 
 	if (r == -ESRCH) {
@@ -183,7 +187,7 @@ static int userspace_ctr(struct dm_dirty_log *log, struct dm_target *ti,
 
 	/* Since the region size does not change, get it now */
 	rdata_size = sizeof(rdata);
-	r = dm_consult_userspace(lc->uuid, DM_ULOG_GET_REGION_SIZE,
+	r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_GET_REGION_SIZE,
 				 NULL, 0, (char *)&rdata, &rdata_size);
 
 	if (r) {
@@ -212,7 +216,7 @@ static void userspace_dtr(struct dm_dirty_log *log)
 	int r;
 	struct log_c *lc = log->context;
 
-	r = dm_consult_userspace(lc->uuid, DM_ULOG_DTR,
+	r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_DTR,
 				 NULL, 0,
 				 NULL, NULL);
 
@@ -227,7 +231,7 @@ static int userspace_presuspend(struct dm_dirty_log *log)
 	int r;
 	struct log_c *lc = log->context;
 
-	r = dm_consult_userspace(lc->uuid, DM_ULOG_PRESUSPEND,
+	r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_PRESUSPEND,
 				 NULL, 0,
 				 NULL, NULL);
 
@@ -239,7 +243,7 @@ static int userspace_postsuspend(struct dm_dirty_log *log)
 	int r;
 	struct log_c *lc = log->context;
 
-	r = dm_consult_userspace(lc->uuid, DM_ULOG_POSTSUSPEND,
+	r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_POSTSUSPEND,
 				 NULL, 0,
 				 NULL, NULL);
 
@@ -252,7 +256,7 @@ static int userspace_resume(struct dm_dirty_log *log)
 	struct log_c *lc = log->context;
 
 	lc->in_sync_hint = 0;
-	r = dm_consult_userspace(lc->uuid, DM_ULOG_RESUME,
+	r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_RESUME,
 				 NULL, 0,
 				 NULL, NULL);
 
@@ -561,6 +565,7 @@ static int userspace_status(struct dm_dirty_log *log, status_type_t status_type,
 			    char *result, unsigned maxlen)
 {
 	int r = 0;
+	char *table_args;
 	size_t sz = (size_t)maxlen;
 	struct log_c *lc = log->context;
 
@@ -577,8 +582,12 @@ static int userspace_status(struct dm_dirty_log *log, status_type_t status_type,
 		break;
 	case STATUSTYPE_TABLE:
 		sz = 0;
-		DMEMIT("%s %u %s %s", log->type->name, lc->usr_argc + 1,
-		       lc->uuid, lc->usr_argv_str);
+		table_args = strstr(lc->usr_argv_str, " ");
+		BUG_ON(!table_args); /* There will always be a ' ' */
+		table_args++;
+
+		DMEMIT("%s %u %s %s ", log->type->name, lc->usr_argc,
+		       lc->uuid, table_args);
 		break;
 	}
 	return (r) ? 0 : (int)sz;
diff --git a/drivers/md/dm-log-userspace-transfer.c b/drivers/md/dm-log-userspace-transfer.c
index 0ca1ee768a1..ba0edad2d04 100644
--- a/drivers/md/dm-log-userspace-transfer.c
+++ b/drivers/md/dm-log-userspace-transfer.c
@@ -108,7 +108,7 @@ static int fill_pkg(struct cn_msg *msg, struct dm_ulog_request *tfr)
 				*(pkg->data_size) = 0;
 		} else if (tfr->data_size > *(pkg->data_size)) {
 			DMERR("Insufficient space to receive package [%u] "
-			      "(%u vs %lu)", tfr->request_type,
+			      "(%u vs %zu)", tfr->request_type,
 			      tfr->data_size, *(pkg->data_size));
 
 			*(pkg->data_size) = 0;
@@ -147,7 +147,8 @@ static void cn_ulog_callback(void *data)
 
 /**
  * dm_consult_userspace
- * @uuid: log's uuid (must be DM_UUID_LEN in size)
+ * @uuid: log's universal unique identifier (must be DM_UUID_LEN in size)
+ * @luid: log's local unique identifier
  * @request_type:  found in include/linux/dm-log-userspace.h
  * @data: data to tx to the server
  * @data_size: size of data in bytes
@@ -163,7 +164,7 @@ static void cn_ulog_callback(void *data)
  *
  * Returns: 0 on success, -EXXX on failure
  **/
-int dm_consult_userspace(const char *uuid, int request_type,
+int dm_consult_userspace(const char *uuid, uint64_t luid, int request_type,
 			 char *data, size_t data_size,
 			 char *rdata, size_t *rdata_size)
 {
@@ -190,6 +191,7 @@ resend:
 
 	memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - overhead_size);
 	memcpy(tfr->uuid, uuid, DM_UUID_LEN);
+	tfr->luid = luid;
 	tfr->seq = dm_ulog_seq++;
 
 	/*
diff --git a/drivers/md/dm-log-userspace-transfer.h b/drivers/md/dm-log-userspace-transfer.h
index c26d8e4e271..04ee874f915 100644
--- a/drivers/md/dm-log-userspace-transfer.h
+++ b/drivers/md/dm-log-userspace-transfer.h
@@ -11,7 +11,7 @@
 
 int dm_ulog_tfr_init(void);
 void dm_ulog_tfr_exit(void);
-int dm_consult_userspace(const char *uuid, int request_type,
+int dm_consult_userspace(const char *uuid, uint64_t luid, int request_type,
 			 char *data, size_t data_size,
 			 char *rdata, size_t *rdata_size);
 
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index c70604a2089..6f0d90d4a54 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1453,7 +1453,7 @@ static int multipath_iterate_devices(struct dm_target *ti,
 
 	list_for_each_entry(pg, &m->priority_groups, list) {
 		list_for_each_entry(p, &pg->pgpaths, list) {
-			ret = fn(ti, p->path.dev, ti->begin, data);
+			ret = fn(ti, p->path.dev, ti->begin, ti->len, data);
 			if (ret)
 				goto out;
 		}
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index ce8868c768c..33f179e66bf 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -638,6 +638,7 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes)
 		spin_lock_irq(&ms->lock);
 		bio_list_merge(&ms->writes, &requeue);
 		spin_unlock_irq(&ms->lock);
+		delayed_wake(ms);
 	}
 
 	/*
@@ -647,7 +648,13 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes)
 	 */
 	dm_rh_inc_pending(ms->rh, &sync);
 	dm_rh_inc_pending(ms->rh, &nosync);
-	ms->log_failure = dm_rh_flush(ms->rh) ? 1 : 0;
+
+	/*
+	 * If the flush fails on a previous call and succeeds here,
+	 * we must not reset the log_failure variable.  We need
+	 * userspace interaction to do that.
+	 */
+	ms->log_failure = dm_rh_flush(ms->rh) ? 1 : ms->log_failure;
 
 	/*
 	 * Dispatch io.
@@ -1292,7 +1299,7 @@ static int mirror_iterate_devices(struct dm_target *ti,
 
 	for (i = 0; !ret && i < ms->nr_mirrors; i++)
 		ret = fn(ti, ms->mirror[i].dev,
-			 ms->mirror[i].offset, data);
+			 ms->mirror[i].offset, ti->len, data);
 
 	return ret;
 }
diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c
index 6e3fe4f1493..d5b2e08750d 100644
--- a/drivers/md/dm-snap-persistent.c
+++ b/drivers/md/dm-snap-persistent.c
@@ -106,6 +106,13 @@ struct pstore {
 	void *zero_area;
 
 	/*
+	 * An area used for header. The header can be written
+	 * concurrently with metadata (when invalidating the snapshot),
+	 * so it needs a separate buffer.
+	 */
+	void *header_area;
+
+	/*
 	 * Used to keep track of which metadata area the data in
 	 * 'chunk' refers to.
 	 */
@@ -148,16 +155,27 @@ static int alloc_area(struct pstore *ps)
 	 */
 	ps->area = vmalloc(len);
 	if (!ps->area)
-		return r;
+		goto err_area;
 
 	ps->zero_area = vmalloc(len);
-	if (!ps->zero_area) {
-		vfree(ps->area);
-		return r;
-	}
+	if (!ps->zero_area)
+		goto err_zero_area;
 	memset(ps->zero_area, 0, len);
 
+	ps->header_area = vmalloc(len);
+	if (!ps->header_area)
+		goto err_header_area;
+
 	return 0;
+
+err_header_area:
+	vfree(ps->zero_area);
+
+err_zero_area:
+	vfree(ps->area);
+
+err_area:
+	return r;
 }
 
 static void free_area(struct pstore *ps)
@@ -169,6 +187,10 @@ static void free_area(struct pstore *ps)
 	if (ps->zero_area)
 		vfree(ps->zero_area);
 	ps->zero_area = NULL;
+
+	if (ps->header_area)
+		vfree(ps->header_area);
+	ps->header_area = NULL;
 }
 
 struct mdata_req {
@@ -188,7 +210,8 @@ static void do_metadata(struct work_struct *work)
 /*
  * Read or write a chunk aligned and sized block of data from a device.
  */
-static int chunk_io(struct pstore *ps, chunk_t chunk, int rw, int metadata)
+static int chunk_io(struct pstore *ps, void *area, chunk_t chunk, int rw,
+		    int metadata)
 {
 	struct dm_io_region where = {
 		.bdev = ps->store->cow->bdev,
@@ -198,7 +221,7 @@ static int chunk_io(struct pstore *ps, chunk_t chunk, int rw, int metadata)
 	struct dm_io_request io_req = {
 		.bi_rw = rw,
 		.mem.type = DM_IO_VMA,
-		.mem.ptr.vma = ps->area,
+		.mem.ptr.vma = area,
 		.client = ps->io_client,
 		.notify.fn = NULL,
 	};
@@ -240,7 +263,7 @@ static int area_io(struct pstore *ps, int rw)
 
 	chunk = area_location(ps, ps->current_area);
 
-	r = chunk_io(ps, chunk, rw, 0);
+	r = chunk_io(ps, ps->area, chunk, rw, 0);
 	if (r)
 		return r;
 
@@ -254,20 +277,7 @@ static void zero_memory_area(struct pstore *ps)
 
 static int zero_disk_area(struct pstore *ps, chunk_t area)
 {
-	struct dm_io_region where = {
-		.bdev = ps->store->cow->bdev,
-		.sector = ps->store->chunk_size * area_location(ps, area),
-		.count = ps->store->chunk_size,
-	};
-	struct dm_io_request io_req = {
-		.bi_rw = WRITE,
-		.mem.type = DM_IO_VMA,
-		.mem.ptr.vma = ps->zero_area,
-		.client = ps->io_client,
-		.notify.fn = NULL,
-	};
-
-	return dm_io(&io_req, 1, &where, NULL);
+	return chunk_io(ps, ps->zero_area, area_location(ps, area), WRITE, 0);
 }
 
 static int read_header(struct pstore *ps, int *new_snapshot)
@@ -276,6 +286,7 @@ static int read_header(struct pstore *ps, int *new_snapshot)
 	struct disk_header *dh;
 	chunk_t chunk_size;
 	int chunk_size_supplied = 1;
+	char *chunk_err;
 
 	/*
 	 * Use default chunk size (or hardsect_size, if larger) if none supplied
@@ -297,11 +308,11 @@ static int read_header(struct pstore *ps, int *new_snapshot)
 	if (r)
 		return r;
 
-	r = chunk_io(ps, 0, READ, 1);
+	r = chunk_io(ps, ps->header_area, 0, READ, 1);
 	if (r)
 		goto bad;
 
-	dh = (struct disk_header *) ps->area;
+	dh = ps->header_area;
 
 	if (le32_to_cpu(dh->magic) == 0) {
 		*new_snapshot = 1;
@@ -319,20 +330,25 @@ static int read_header(struct pstore *ps, int *new_snapshot)
 	ps->version = le32_to_cpu(dh->version);
 	chunk_size = le32_to_cpu(dh->chunk_size);
 
-	if (!chunk_size_supplied || ps->store->chunk_size == chunk_size)
+	if (ps->store->chunk_size == chunk_size)
 		return 0;
 
-	DMWARN("chunk size %llu in device metadata overrides "
-	       "table chunk size of %llu.",
-	       (unsigned long long)chunk_size,
-	       (unsigned long long)ps->store->chunk_size);
+	if (chunk_size_supplied)
+		DMWARN("chunk size %llu in device metadata overrides "
+		       "table chunk size of %llu.",
+		       (unsigned long long)chunk_size,
+		       (unsigned long long)ps->store->chunk_size);
 
 	/* We had a bogus chunk_size. Fix stuff up. */
 	free_area(ps);
 
-	ps->store->chunk_size = chunk_size;
-	ps->store->chunk_mask = chunk_size - 1;
-	ps->store->chunk_shift = ffs(chunk_size) - 1;
+	r = dm_exception_store_set_chunk_size(ps->store, chunk_size,
+					      &chunk_err);
+	if (r) {
+		DMERR("invalid on-disk chunk size %llu: %s.",
+		      (unsigned long long)chunk_size, chunk_err);
+		return r;
+	}
 
 	r = dm_io_client_resize(sectors_to_pages(ps->store->chunk_size),
 				ps->io_client);
@@ -351,15 +367,15 @@ static int write_header(struct pstore *ps)
 {
 	struct disk_header *dh;
 
-	memset(ps->area, 0, ps->store->chunk_size << SECTOR_SHIFT);
+	memset(ps->header_area, 0, ps->store->chunk_size << SECTOR_SHIFT);
 
-	dh = (struct disk_header *) ps->area;
+	dh = ps->header_area;
 	dh->magic = cpu_to_le32(SNAP_MAGIC);
 	dh->valid = cpu_to_le32(ps->valid);
 	dh->version = cpu_to_le32(ps->version);
 	dh->chunk_size = cpu_to_le32(ps->store->chunk_size);
 
-	return chunk_io(ps, 0, WRITE, 1);
+	return chunk_io(ps, ps->header_area, 0, WRITE, 1);
 }
 
 /*
@@ -679,6 +695,8 @@ static int persistent_ctr(struct dm_exception_store *store,
 	ps->valid = 1;
 	ps->version = SNAPSHOT_DISK_VERSION;
 	ps->area = NULL;
+	ps->zero_area = NULL;
+	ps->header_area = NULL;
 	ps->next_free = 2;	/* skipping the header and first area */
 	ps->current_committed = 0;
 
diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index d573165cd2b..57f1bf7f3b7 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -1176,6 +1176,15 @@ static int snapshot_status(struct dm_target *ti, status_type_t type,
 	return 0;
 }
 
+static int snapshot_iterate_devices(struct dm_target *ti,
+				    iterate_devices_callout_fn fn, void *data)
+{
+	struct dm_snapshot *snap = ti->private;
+
+	return fn(ti, snap->origin, 0, ti->len, data);
+}
+
+
 /*-----------------------------------------------------------------
  * Origin methods
  *---------------------------------------------------------------*/
@@ -1410,20 +1419,29 @@ static int origin_status(struct dm_target *ti, status_type_t type, char *result,
 	return 0;
 }
 
+static int origin_iterate_devices(struct dm_target *ti,
+				  iterate_devices_callout_fn fn, void *data)
+{
+	struct dm_dev *dev = ti->private;
+
+	return fn(ti, dev, 0, ti->len, data);
+}
+
 static struct target_type origin_target = {
 	.name    = "snapshot-origin",
-	.version = {1, 6, 0},
+	.version = {1, 7, 0},
 	.module  = THIS_MODULE,
 	.ctr     = origin_ctr,
 	.dtr     = origin_dtr,
 	.map     = origin_map,
 	.resume  = origin_resume,
 	.status  = origin_status,
+	.iterate_devices = origin_iterate_devices,
 };
 
 static struct target_type snapshot_target = {
 	.name    = "snapshot",
-	.version = {1, 6, 0},
+	.version = {1, 7, 0},
 	.module  = THIS_MODULE,
 	.ctr     = snapshot_ctr,
 	.dtr     = snapshot_dtr,
@@ -1431,6 +1449,7 @@ static struct target_type snapshot_target = {
 	.end_io  = snapshot_end_io,
 	.resume  = snapshot_resume,
 	.status  = snapshot_status,
+	.iterate_devices = snapshot_iterate_devices,
 };
 
 static int __init dm_snapshot_init(void)
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index b240e85ae39..3e563d25173 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -320,17 +320,28 @@ static int stripe_iterate_devices(struct dm_target *ti,
 	int ret = 0;
 	unsigned i = 0;
 
-	do
+	do {
 		ret = fn(ti, sc->stripe[i].dev,
-			 sc->stripe[i].physical_start, data);
-	while (!ret && ++i < sc->stripes);
+			 sc->stripe[i].physical_start,
+			 sc->stripe_width, data);
+	} while (!ret && ++i < sc->stripes);
 
 	return ret;
 }
 
+static void stripe_io_hints(struct dm_target *ti,
+			    struct queue_limits *limits)
+{
+	struct stripe_c *sc = ti->private;
+	unsigned chunk_size = (sc->chunk_mask + 1) << 9;
+
+	blk_limits_io_min(limits, chunk_size);
+	limits->io_opt = chunk_size * sc->stripes;
+}
+
 static struct target_type stripe_target = {
 	.name   = "striped",
-	.version = {1, 2, 0},
+	.version = {1, 3, 0},
 	.module = THIS_MODULE,
 	.ctr    = stripe_ctr,
 	.dtr    = stripe_dtr,
@@ -338,6 +349,7 @@ static struct target_type stripe_target = {
 	.end_io = stripe_end_io,
 	.status = stripe_status,
 	.iterate_devices = stripe_iterate_devices,
+	.io_hints = stripe_io_hints,
 };
 
 int __init dm_stripe_init(void)
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 4899ebe767c..1a6cb3c7822 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -343,10 +343,10 @@ static void close_dev(struct dm_dev_internal *d, struct mapped_device *md)
 }
 
 /*
- * If possible, this checks an area of a destination device is valid.
+ * If possible, this checks an area of a destination device is invalid.
  */
-static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
-				sector_t start, void *data)
+static int device_area_is_invalid(struct dm_target *ti, struct dm_dev *dev,
+				  sector_t start, sector_t len, void *data)
 {
 	struct queue_limits *limits = data;
 	struct block_device *bdev = dev->bdev;
@@ -357,36 +357,40 @@ static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
 	char b[BDEVNAME_SIZE];
 
 	if (!dev_size)
-		return 1;
-
-	if ((start >= dev_size) || (start + ti->len > dev_size)) {
-		DMWARN("%s: %s too small for target",
-		       dm_device_name(ti->table->md), bdevname(bdev, b));
 		return 0;
+
+	if ((start >= dev_size) || (start + len > dev_size)) {
+		DMWARN("%s: %s too small for target: "
+		       "start=%llu, len=%llu, dev_size=%llu",
+		       dm_device_name(ti->table->md), bdevname(bdev, b),
+		       (unsigned long long)start,
+		       (unsigned long long)len,
+		       (unsigned long long)dev_size);
+		return 1;
 	}
 
 	if (logical_block_size_sectors <= 1)
-		return 1;
+		return 0;
 
 	if (start & (logical_block_size_sectors - 1)) {
 		DMWARN("%s: start=%llu not aligned to h/w "
-		       "logical block size %hu of %s",
+		       "logical block size %u of %s",
 		       dm_device_name(ti->table->md),
 		       (unsigned long long)start,
 		       limits->logical_block_size, bdevname(bdev, b));
-		return 0;
+		return 1;
 	}
 
-	if (ti->len & (logical_block_size_sectors - 1)) {
+	if (len & (logical_block_size_sectors - 1)) {
 		DMWARN("%s: len=%llu not aligned to h/w "
-		       "logical block size %hu of %s",
+		       "logical block size %u of %s",
 		       dm_device_name(ti->table->md),
-		       (unsigned long long)ti->len,
+		       (unsigned long long)len,
 		       limits->logical_block_size, bdevname(bdev, b));
-		return 0;
+		return 1;
 	}
 
-	return 1;
+	return 0;
 }
 
 /*
@@ -482,7 +486,7 @@ static int __table_get_device(struct dm_table *t, struct dm_target *ti,
 #define min_not_zero(l, r) (l == 0) ? r : ((r == 0) ? l : min(l, r))
 
 int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
-			 sector_t start, void *data)
+			 sector_t start, sector_t len, void *data)
 {
 	struct queue_limits *limits = data;
 	struct block_device *bdev = dev->bdev;
@@ -495,9 +499,16 @@ int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
 		return 0;
 	}
 
-	if (blk_stack_limits(limits, &q->limits, start) < 0)
-		DMWARN("%s: target device %s is misaligned",
-		       dm_device_name(ti->table->md), bdevname(bdev, b));
+	if (blk_stack_limits(limits, &q->limits, start << 9) < 0)
+		DMWARN("%s: target device %s is misaligned: "
+		       "physical_block_size=%u, logical_block_size=%u, "
+		       "alignment_offset=%u, start=%llu",
+		       dm_device_name(ti->table->md), bdevname(bdev, b),
+		       q->limits.physical_block_size,
+		       q->limits.logical_block_size,
+		       q->limits.alignment_offset,
+		       (unsigned long long) start << 9);
+
 
 	/*
 	 * Check if merge fn is supported.
@@ -698,7 +709,7 @@ static int validate_hardware_logical_block_alignment(struct dm_table *table,
 
 	if (remaining) {
 		DMWARN("%s: table line %u (start sect %llu len %llu) "
-		       "not aligned to h/w logical block size %hu",
+		       "not aligned to h/w logical block size %u",
 		       dm_device_name(table->md), i,
 		       (unsigned long long) ti->begin,
 		       (unsigned long long) ti->len,
@@ -830,11 +841,6 @@ unsigned dm_table_get_type(struct dm_table *t)
 	return t->type;
 }
 
-bool dm_table_bio_based(struct dm_table *t)
-{
-	return dm_table_get_type(t) == DM_TYPE_BIO_BASED;
-}
-
 bool dm_table_request_based(struct dm_table *t)
 {
 	return dm_table_get_type(t) == DM_TYPE_REQUEST_BASED;
@@ -1001,12 +1007,16 @@ int dm_calculate_queue_limits(struct dm_table *table,
 		ti->type->iterate_devices(ti, dm_set_device_limits,
 					  &ti_limits);
 
+		/* Set I/O hints portion of queue limits */
+		if (ti->type->io_hints)
+			ti->type->io_hints(ti, &ti_limits);
+
 		/*
 		 * Check each device area is consistent with the target's
 		 * overall queue limits.
 		 */
-		if (!ti->type->iterate_devices(ti, device_area_is_valid,
-					       &ti_limits))
+		if (ti->type->iterate_devices(ti, device_area_is_invalid,
+					      &ti_limits))
 			return -EINVAL;
 
 combine_limits:
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 3c6d4ee8921..b4845b14740 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -738,16 +738,22 @@ static void rq_completed(struct mapped_device *md, int run_queue)
 	dm_put(md);
 }
 
+static void free_rq_clone(struct request *clone)
+{
+	struct dm_rq_target_io *tio = clone->end_io_data;
+
+	blk_rq_unprep_clone(clone);
+	free_rq_tio(tio);
+}
+
 static void dm_unprep_request(struct request *rq)
 {
 	struct request *clone = rq->special;
-	struct dm_rq_target_io *tio = clone->end_io_data;
 
 	rq->special = NULL;
 	rq->cmd_flags &= ~REQ_DONTPREP;
 
-	blk_rq_unprep_clone(clone);
-	free_rq_tio(tio);
+	free_rq_clone(clone);
 }
 
 /*
@@ -825,8 +831,7 @@ static void dm_end_request(struct request *clone, int error)
 			rq->sense_len = clone->sense_len;
 	}
 
-	BUG_ON(clone->bio);
-	free_rq_tio(tio);
+	free_rq_clone(clone);
 
 	blk_end_request_all(rq, error);
 
@@ -1017,7 +1022,7 @@ static struct bio *split_bvec(struct bio *bio, sector_t sector,
 	clone->bi_flags |= 1 << BIO_CLONED;
 
 	if (bio_integrity(bio)) {
-		bio_integrity_clone(clone, bio, GFP_NOIO);
+		bio_integrity_clone(clone, bio, GFP_NOIO, bs);
 		bio_integrity_trim(clone,
 				   bio_sector_offset(bio, idx, offset), len);
 	}
@@ -1045,7 +1050,7 @@ static struct bio *clone_bio(struct bio *bio, sector_t sector,
 	clone->bi_flags &= ~(1 << BIO_SEG_VALID);
 
 	if (bio_integrity(bio)) {
-		bio_integrity_clone(clone, bio, GFP_NOIO);
+		bio_integrity_clone(clone, bio, GFP_NOIO, bs);
 
 		if (idx != bio->bi_idx || clone->bi_size < bio->bi_size)
 			bio_integrity_trim(clone,
@@ -2203,16 +2208,6 @@ int dm_swap_table(struct mapped_device *md, struct dm_table *table)
 		goto out;
 	}
 
-	/*
-	 * It is enought that blk_queue_ordered() is called only once when
-	 * the first bio-based table is bound.
-	 *
-	 * This setting should be moved to alloc_dev() when request-based dm
-	 * supports barrier.
-	 */
-	if (!md->map && dm_table_bio_based(table))
-		blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN, NULL);
-
 	__unbind(md);
 	r = __bind(md, table, &limits);
 
diff --git a/drivers/md/dm.h b/drivers/md/dm.h
index 23278ae80f0..a7663eba17e 100644
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -61,7 +61,6 @@ int dm_table_any_congested(struct dm_table *t, int bdi_bits);
 int dm_table_any_busy_target(struct dm_table *t);
 int dm_table_set_type(struct dm_table *t);
 unsigned dm_table_get_type(struct dm_table *t);
-bool dm_table_bio_based(struct dm_table *t);
 bool dm_table_request_based(struct dm_table *t);
 int dm_table_alloc_md_mempools(struct dm_table *t);
 void dm_table_free_md_mempools(struct dm_table *t);
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 15c8b7b25a9..5fe39c2a3d2 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -166,8 +166,8 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks)
 			rdev->sectors = sectors * mddev->chunk_sectors;
 		}
 
-		blk_queue_stack_limits(mddev->queue,
-				       rdev->bdev->bd_disk->queue);
+		disk_stack_limits(mddev->gendisk, rdev->bdev,
+				  rdev->data_offset << 9);
 		/* as we don't honour merge_bvec_fn, we must never risk
 		 * violating it, so limit ->max_sector to one PAGE, as
 		 * a one page request is never in violation.
@@ -220,6 +220,7 @@ static int linear_run (mddev_t *mddev)
 	mddev->queue->unplug_fn = linear_unplug;
 	mddev->queue->backing_dev_info.congested_fn = linear_congested;
 	mddev->queue->backing_dev_info.congested_data = mddev;
+	md_integrity_register(mddev);
 	return 0;
 }
 
@@ -256,6 +257,7 @@ static int linear_add(mddev_t *mddev, mdk_rdev_t *rdev)
 	rcu_assign_pointer(mddev->private, newconf);
 	md_set_array_sectors(mddev, linear_size(mddev, 0, 0));
 	set_capacity(mddev->gendisk, mddev->array_sectors);
+	revalidate_disk(mddev->gendisk);
 	call_rcu(&oldconf->rcu, free_conf);
 	return 0;
 }
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 09be637d52c..9dd872000ce 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -359,6 +359,7 @@ static mddev_t * mddev_find(dev_t unit)
 	else
 		new->md_minor = MINOR(unit) >> MdpMinorShift;
 
+	mutex_init(&new->open_mutex);
 	mutex_init(&new->reconfig_mutex);
 	INIT_LIST_HEAD(&new->disks);
 	INIT_LIST_HEAD(&new->all_mddevs);
@@ -1308,7 +1309,12 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 	}
 	if (mddev->level != LEVEL_MULTIPATH) {
 		int role;
-		role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]);
+		if (rdev->desc_nr < 0 ||
+		    rdev->desc_nr >= le32_to_cpu(sb->max_dev)) {
+			role = 0xffff;
+			rdev->desc_nr = -1;
+		} else
+			role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]);
 		switch(role) {
 		case 0xffff: /* spare */
 			break;
@@ -1394,8 +1400,14 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev)
 		if (rdev2->desc_nr+1 > max_dev)
 			max_dev = rdev2->desc_nr+1;
 
-	if (max_dev > le32_to_cpu(sb->max_dev))
+	if (max_dev > le32_to_cpu(sb->max_dev)) {
+		int bmask;
 		sb->max_dev = cpu_to_le32(max_dev);
+		rdev->sb_size = max_dev * 2 + 256;
+		bmask = queue_logical_block_size(rdev->bdev->bd_disk->queue)-1;
+		if (rdev->sb_size & bmask)
+			rdev->sb_size = (rdev->sb_size | bmask) + 1;
+	}
 	for (i=0; i<max_dev;i++)
 		sb->dev_roles[i] = cpu_to_le16(0xfffe);
 	
@@ -1487,37 +1499,76 @@ static int match_mddev_units(mddev_t *mddev1, mddev_t *mddev2)
 
 static LIST_HEAD(pending_raid_disks);
 
-static void md_integrity_check(mdk_rdev_t *rdev, mddev_t *mddev)
+/*
+ * Try to register data integrity profile for an mddev
+ *
+ * This is called when an array is started and after a disk has been kicked
+ * from the array. It only succeeds if all working and active component devices
+ * are integrity capable with matching profiles.
+ */
+int md_integrity_register(mddev_t *mddev)
+{
+	mdk_rdev_t *rdev, *reference = NULL;
+
+	if (list_empty(&mddev->disks))
+		return 0; /* nothing to do */
+	if (blk_get_integrity(mddev->gendisk))
+		return 0; /* already registered */
+	list_for_each_entry(rdev, &mddev->disks, same_set) {
+		/* skip spares and non-functional disks */
+		if (test_bit(Faulty, &rdev->flags))
+			continue;
+		if (rdev->raid_disk < 0)
+			continue;
+		/*
+		 * If at least one rdev is not integrity capable, we can not
+		 * enable data integrity for the md device.
+		 */
+		if (!bdev_get_integrity(rdev->bdev))
+			return -EINVAL;
+		if (!reference) {
+			/* Use the first rdev as the reference */
+			reference = rdev;
+			continue;
+		}
+		/* does this rdev's profile match the reference profile? */
+		if (blk_integrity_compare(reference->bdev->bd_disk,
+				rdev->bdev->bd_disk) < 0)
+			return -EINVAL;
+	}
+	/*
+	 * All component devices are integrity capable and have matching
+	 * profiles, register the common profile for the md device.
+	 */
+	if (blk_integrity_register(mddev->gendisk,
+			bdev_get_integrity(reference->bdev)) != 0) {
+		printk(KERN_ERR "md: failed to register integrity for %s\n",
+			mdname(mddev));
+		return -EINVAL;
+	}
+	printk(KERN_NOTICE "md: data integrity on %s enabled\n",
+		mdname(mddev));
+	return 0;
+}
+EXPORT_SYMBOL(md_integrity_register);
+
+/* Disable data integrity if non-capable/non-matching disk is being added */
+void md_integrity_add_rdev(mdk_rdev_t *rdev, mddev_t *mddev)
 {
-	struct mdk_personality *pers = mddev->pers;
-	struct gendisk *disk = mddev->gendisk;
 	struct blk_integrity *bi_rdev = bdev_get_integrity(rdev->bdev);
-	struct blk_integrity *bi_mddev = blk_get_integrity(disk);
+	struct blk_integrity *bi_mddev = blk_get_integrity(mddev->gendisk);
 
-	/* Data integrity passthrough not supported on RAID 4, 5 and 6 */
-	if (pers && pers->level >= 4 && pers->level <= 6)
+	if (!bi_mddev) /* nothing to do */
 		return;
-
-	/* If rdev is integrity capable, register profile for mddev */
-	if (!bi_mddev && bi_rdev) {
-		if (blk_integrity_register(disk, bi_rdev))
-			printk(KERN_ERR "%s: %s Could not register integrity!\n",
-			       __func__, disk->disk_name);
-		else
-			printk(KERN_NOTICE "Enabling data integrity on %s\n",
-			       disk->disk_name);
+	if (rdev->raid_disk < 0) /* skip spares */
 		return;
-	}
-
-	/* Check that mddev and rdev have matching profiles */
-	if (blk_integrity_compare(disk, rdev->bdev->bd_disk) < 0) {
-		printk(KERN_ERR "%s: %s/%s integrity mismatch!\n", __func__,
-		       disk->disk_name, rdev->bdev->bd_disk->disk_name);
-		printk(KERN_NOTICE "Disabling data integrity on %s\n",
-		       disk->disk_name);
-		blk_integrity_unregister(disk);
-	}
+	if (bi_rdev && blk_integrity_compare(mddev->gendisk,
+					     rdev->bdev->bd_disk) >= 0)
+		return;
+	printk(KERN_NOTICE "disabling data integrity on %s\n", mdname(mddev));
+	blk_integrity_unregister(mddev->gendisk);
 }
+EXPORT_SYMBOL(md_integrity_add_rdev);
 
 static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev)
 {
@@ -1591,7 +1642,6 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev)
 	/* May as well allow recovery to be retried once */
 	mddev->recovery_disabled = 0;
 
-	md_integrity_check(rdev, mddev);
 	return 0;
 
  fail:
@@ -1756,9 +1806,10 @@ static void print_sb_1(struct mdp_superblock_1 *sb)
 	__u8 *uuid;
 
 	uuid = sb->set_uuid;
-	printk(KERN_INFO "md:  SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x"
-			":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n"
-	       KERN_INFO "md:    Name: \"%s\" CT:%llu\n",
+	printk(KERN_INFO
+	       "md:  SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x"
+	       ":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n"
+	       "md:    Name: \"%s\" CT:%llu\n",
 		le32_to_cpu(sb->major_version),
 		le32_to_cpu(sb->feature_map),
 		uuid[0], uuid[1], uuid[2], uuid[3],
@@ -1770,12 +1821,13 @@ static void print_sb_1(struct mdp_superblock_1 *sb)
 		       & MD_SUPERBLOCK_1_TIME_SEC_MASK);
 
 	uuid = sb->device_uuid;
-	printk(KERN_INFO "md:       L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu"
+	printk(KERN_INFO
+	       "md:       L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu"
 			" RO:%llu\n"
-	       KERN_INFO "md:     Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x"
-			":%02x%02x%02x%02x%02x%02x\n"
-	       KERN_INFO "md:       (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n"
-	       KERN_INFO "md:         (MaxDev:%u) \n",
+	       "md:     Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x"
+	                ":%02x%02x%02x%02x%02x%02x\n"
+	       "md:       (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n"
+	       "md:         (MaxDev:%u) \n",
 		le32_to_cpu(sb->level),
 		(unsigned long long)le64_to_cpu(sb->size),
 		le32_to_cpu(sb->raid_disks),
@@ -1923,17 +1975,14 @@ repeat:
 		/* otherwise we have to go forward and ... */
 		mddev->events ++;
 		if (!mddev->in_sync || mddev->recovery_cp != MaxSector) { /* not clean */
-			/* .. if the array isn't clean, insist on an odd 'events' */
-			if ((mddev->events&1)==0) {
-				mddev->events++;
+			/* .. if the array isn't clean, an 'even' event must also go
+			 * to spares. */
+			if ((mddev->events&1)==0)
 				nospares = 0;
-			}
 		} else {
-			/* otherwise insist on an even 'events' (for clean states) */
-			if ((mddev->events&1)) {
-				mddev->events++;
+			/* otherwise an 'odd' event must go to spares */
+			if ((mddev->events&1))
 				nospares = 0;
-			}
 		}
 	}
 
@@ -2655,6 +2704,7 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
 	ssize_t rv = len;
 	struct mdk_personality *pers;
 	void *priv;
+	mdk_rdev_t *rdev;
 
 	if (mddev->pers == NULL) {
 		if (len == 0)
@@ -2734,6 +2784,12 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
 	mddev_suspend(mddev);
 	mddev->pers->stop(mddev);
 	module_put(mddev->pers->owner);
+	/* Invalidate devices that are now superfluous */
+	list_for_each_entry(rdev, &mddev->disks, same_set)
+		if (rdev->raid_disk >= mddev->raid_disks) {
+			rdev->raid_disk = -1;
+			clear_bit(In_sync, &rdev->flags);
+		}
 	mddev->pers = pers;
 	mddev->private = priv;
 	strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
@@ -3543,6 +3599,7 @@ max_sync_store(mddev_t *mddev, const char *buf, size_t len)
 		if (max < mddev->resync_min)
 			return -EINVAL;
 		if (max < mddev->resync_max &&
+		    mddev->ro == 0 &&
 		    test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
 			return -EBUSY;
 
@@ -3573,7 +3630,8 @@ suspend_lo_store(mddev_t *mddev, const char *buf, size_t len)
 	char *e;
 	unsigned long long new = simple_strtoull(buf, &e, 10);
 
-	if (mddev->pers->quiesce == NULL)
+	if (mddev->pers == NULL || 
+	    mddev->pers->quiesce == NULL)
 		return -EINVAL;
 	if (buf == e || (*e && *e != '\n'))
 		return -EINVAL;
@@ -3601,7 +3659,8 @@ suspend_hi_store(mddev_t *mddev, const char *buf, size_t len)
 	char *e;
 	unsigned long long new = simple_strtoull(buf, &e, 10);
 
-	if (mddev->pers->quiesce == NULL)
+	if (mddev->pers == NULL ||
+	    mddev->pers->quiesce == NULL)
 		return -EINVAL;
 	if (buf == e || (*e && *e != '\n'))
 		return -EINVAL;
@@ -3681,17 +3740,8 @@ array_size_store(mddev_t *mddev, const char *buf, size_t len)
 
 	mddev->array_sectors = sectors;
 	set_capacity(mddev->gendisk, mddev->array_sectors);
-	if (mddev->pers) {
-		struct block_device *bdev = bdget_disk(mddev->gendisk, 0);
-
-		if (bdev) {
-			mutex_lock(&bdev->bd_inode->i_mutex);
-			i_size_write(bdev->bd_inode,
-				     (loff_t)mddev->array_sectors << 9);
-			mutex_unlock(&bdev->bd_inode->i_mutex);
-			bdput(bdev);
-		}
-	}
+	if (mddev->pers)
+		revalidate_disk(mddev->gendisk);
 
 	return len;
 }
@@ -3844,11 +3894,9 @@ static int md_alloc(dev_t dev, char *name)
 	flush_scheduled_work();
 
 	mutex_lock(&disks_mutex);
-	if (mddev->gendisk) {
-		mutex_unlock(&disks_mutex);
-		mddev_put(mddev);
-		return -EEXIST;
-	}
+	error = -EEXIST;
+	if (mddev->gendisk)
+		goto abort;
 
 	if (name) {
 		/* Need to ensure that 'name' is not a duplicate.
@@ -3860,17 +3908,15 @@ static int md_alloc(dev_t dev, char *name)
 			if (mddev2->gendisk &&
 			    strcmp(mddev2->gendisk->disk_name, name) == 0) {
 				spin_unlock(&all_mddevs_lock);
-				return -EEXIST;
+				goto abort;
 			}
 		spin_unlock(&all_mddevs_lock);
 	}
 
+	error = -ENOMEM;
 	mddev->queue = blk_alloc_queue(GFP_KERNEL);
-	if (!mddev->queue) {
-		mutex_unlock(&disks_mutex);
-		mddev_put(mddev);
-		return -ENOMEM;
-	}
+	if (!mddev->queue)
+		goto abort;
 	mddev->queue->queuedata = mddev;
 
 	/* Can be unlocked because the queue is new: no concurrency */
@@ -3880,11 +3926,9 @@ static int md_alloc(dev_t dev, char *name)
 
 	disk = alloc_disk(1 << shift);
 	if (!disk) {
-		mutex_unlock(&disks_mutex);
 		blk_cleanup_queue(mddev->queue);
 		mddev->queue = NULL;
-		mddev_put(mddev);
-		return -ENOMEM;
+		goto abort;
 	}
 	disk->major = MAJOR(mddev->unit);
 	disk->first_minor = unit << shift;
@@ -3906,16 +3950,22 @@ static int md_alloc(dev_t dev, char *name)
 	mddev->gendisk = disk;
 	error = kobject_init_and_add(&mddev->kobj, &md_ktype,
 				     &disk_to_dev(disk)->kobj, "%s", "md");
-	mutex_unlock(&disks_mutex);
-	if (error)
+	if (error) {
+		/* This isn't possible, but as kobject_init_and_add is marked
+		 * __must_check, we must do something with the result
+		 */
 		printk(KERN_WARNING "md: cannot register %s/md - name in use\n",
 		       disk->disk_name);
-	else {
+		error = 0;
+	}
+ abort:
+	mutex_unlock(&disks_mutex);
+	if (!error) {
 		kobject_uevent(&mddev->kobj, KOBJ_ADD);
 		mddev->sysfs_state = sysfs_get_dirent(mddev->kobj.sd, "array_state");
 	}
 	mddev_put(mddev);
-	return 0;
+	return error;
 }
 
 static struct kobject *md_probe(dev_t dev, int *part, void *data)
@@ -4044,10 +4094,6 @@ static int do_md_run(mddev_t * mddev)
 	}
 	strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
 
-	if (pers->level >= 4 && pers->level <= 6)
-		/* Cannot support integrity (yet) */
-		blk_integrity_unregister(mddev->gendisk);
-
 	if (mddev->reshape_position != MaxSector &&
 	    pers->start_reshape == NULL) {
 		/* This personality cannot handle reshaping... */
@@ -4185,6 +4231,7 @@ static int do_md_run(mddev_t * mddev)
 	md_wakeup_thread(mddev->thread);
 	md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
 
+	revalidate_disk(mddev->gendisk);
 	mddev->changed = 1;
 	md_new_event(mddev);
 	sysfs_notify_dirent(mddev->sysfs_state);
@@ -4256,12 +4303,11 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 	struct gendisk *disk = mddev->gendisk;
 	mdk_rdev_t *rdev;
 
+	mutex_lock(&mddev->open_mutex);
 	if (atomic_read(&mddev->openers) > is_open) {
 		printk("md: %s still in use.\n",mdname(mddev));
-		return -EBUSY;
-	}
-
-	if (mddev->pers) {
+		err = -EBUSY;
+	} else if (mddev->pers) {
 
 		if (mddev->sync_thread) {
 			set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
@@ -4318,8 +4364,12 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 		if (mode == 1)
 			set_disk_ro(disk, 1);
 		clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+		err = 0;
 	}
-
+out:
+	mutex_unlock(&mddev->open_mutex);
+	if (err)
+		return err;
 	/*
 	 * Free resources if final stop
 	 */
@@ -4385,7 +4435,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 	blk_integrity_unregister(disk);
 	md_new_event(mddev);
 	sysfs_notify_dirent(mddev->sysfs_state);
-out:
 	return err;
 }
 
@@ -5083,18 +5132,8 @@ static int update_size(mddev_t *mddev, sector_t num_sectors)
 			return -ENOSPC;
 	}
 	rv = mddev->pers->resize(mddev, num_sectors);
-	if (!rv) {
-		struct block_device *bdev;
-
-		bdev = bdget_disk(mddev->gendisk, 0);
-		if (bdev) {
-			mutex_lock(&bdev->bd_inode->i_mutex);
-			i_size_write(bdev->bd_inode,
-				     (loff_t)mddev->array_sectors << 9);
-			mutex_unlock(&bdev->bd_inode->i_mutex);
-			bdput(bdev);
-		}
-	}
+	if (!rv)
+		revalidate_disk(mddev->gendisk);
 	return rv;
 }
 
@@ -5480,12 +5519,12 @@ static int md_open(struct block_device *bdev, fmode_t mode)
 	}
 	BUG_ON(mddev != bdev->bd_disk->private_data);
 
-	if ((err = mutex_lock_interruptible_nested(&mddev->reconfig_mutex, 1)))
+	if ((err = mutex_lock_interruptible(&mddev->open_mutex)))
 		goto out;
 
 	err = 0;
 	atomic_inc(&mddev->openers);
-	mddev_unlock(mddev);
+	mutex_unlock(&mddev->open_mutex);
 
 	check_disk_change(bdev);
  out:
@@ -6334,10 +6373,16 @@ void md_do_sync(mddev_t *mddev)
 			sysfs_notify(&mddev->kobj, NULL, "sync_completed");
 		}
 
-		if (j >= mddev->resync_max)
-			wait_event(mddev->recovery_wait,
-				   mddev->resync_max > j
-				   || kthread_should_stop());
+		while (j >= mddev->resync_max && !kthread_should_stop()) {
+			/* As this condition is controlled by user-space,
+			 * we can block indefinitely, so use '_interruptible'
+			 * to avoid triggering warnings.
+			 */
+			flush_signals(current); /* just in case */
+			wait_event_interruptible(mddev->recovery_wait,
+						 mddev->resync_max > j
+						 || kthread_should_stop());
+		}
 
 		if (kthread_should_stop())
 			goto interrupted;
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 9430a110db9..f8fc188bc76 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -223,6 +223,16 @@ struct mddev_s
 							    * so we don't loop trying */
 
 	int				in_sync;	/* know to not need resync */
+	/* 'open_mutex' avoids races between 'md_open' and 'do_md_stop', so
+	 * that we are never stopping an array while it is open.
+	 * 'reconfig_mutex' protects all other reconfiguration.
+	 * These locks are separate due to conflicting interactions
+	 * with bdev->bd_mutex.
+	 * Lock ordering is:
+	 *  reconfig_mutex -> bd_mutex : e.g. do_md_run -> revalidate_disk
+	 *  bd_mutex -> open_mutex:  e.g. __blkdev_get -> md_open
+	 */
+	struct mutex			open_mutex;
 	struct mutex			reconfig_mutex;
 	atomic_t			active;		/* general refcount */
 	atomic_t			openers;	/* number of active opens */
@@ -431,5 +441,7 @@ extern int md_allow_write(mddev_t *mddev);
 extern void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
 extern void md_set_array_sectors(mddev_t *mddev, sector_t array_sectors);
 extern int md_check_no_bitmap(mddev_t *mddev);
+extern int md_integrity_register(mddev_t *mddev);
+void md_integrity_add_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
 
 #endif /* _MD_MD_H */
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index cbe368fa659..7140909f666 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -294,7 +294,8 @@ static int multipath_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 	for (path = first; path <= last; path++)
 		if ((p=conf->multipaths+path)->rdev == NULL) {
 			q = rdev->bdev->bd_disk->queue;
-			blk_queue_stack_limits(mddev->queue, q);
+			disk_stack_limits(mddev->gendisk, rdev->bdev,
+					  rdev->data_offset << 9);
 
 		/* as we don't honour merge_bvec_fn, we must never risk
 		 * violating it, so limit ->max_sector to one PAGE, as
@@ -312,6 +313,7 @@ static int multipath_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 			set_bit(In_sync, &rdev->flags);
 			rcu_assign_pointer(p->rdev, rdev);
 			err = 0;
+			md_integrity_add_rdev(rdev, mddev);
 			break;
 		}
 
@@ -344,7 +346,9 @@ static int multipath_remove_disk(mddev_t *mddev, int number)
 			/* lost the race, try later */
 			err = -EBUSY;
 			p->rdev = rdev;
+			goto abort;
 		}
+		md_integrity_register(mddev);
 	}
 abort:
 
@@ -463,9 +467,9 @@ static int multipath_run (mddev_t *mddev)
 
 		disk = conf->multipaths + disk_idx;
 		disk->rdev = rdev;
+		disk_stack_limits(mddev->gendisk, rdev->bdev,
+				  rdev->data_offset << 9);
 
-		blk_queue_stack_limits(mddev->queue,
-				       rdev->bdev->bd_disk->queue);
 		/* as we don't honour merge_bvec_fn, we must never risk
 		 * violating it, not that we ever expect a device with
 		 * a merge_bvec_fn to be involved in multipath */
@@ -518,7 +522,7 @@ static int multipath_run (mddev_t *mddev)
 	mddev->queue->unplug_fn = multipath_unplug;
 	mddev->queue->backing_dev_info.congested_fn = multipath_congested;
 	mddev->queue->backing_dev_info.congested_data = mddev;
-
+	md_integrity_register(mddev);
 	return 0;
 
 out_free_conf:
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index ab4a489d869..898e2bdfee4 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -170,8 +170,8 @@ static int create_strip_zones(mddev_t *mddev)
 		}
 		dev[j] = rdev1;
 
-		blk_queue_stack_limits(mddev->queue,
-				       rdev1->bdev->bd_disk->queue);
+		disk_stack_limits(mddev->gendisk, rdev1->bdev,
+				  rdev1->data_offset << 9);
 		/* as we don't honour merge_bvec_fn, we must never risk
 		 * violating it, so limit ->max_sector to one PAGE, as
 		 * a one page request is never in violation.
@@ -250,6 +250,11 @@ static int create_strip_zones(mddev_t *mddev)
 		       mddev->chunk_sectors << 9);
 		goto abort;
 	}
+
+	blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9);
+	blk_queue_io_opt(mddev->queue,
+			 (mddev->chunk_sectors << 9) * mddev->raid_disks);
+
 	printk(KERN_INFO "raid0: done.\n");
 	mddev->private = conf;
 	return 0;
@@ -346,6 +351,7 @@ static int raid0_run(mddev_t *mddev)
 
 	blk_queue_merge_bvec(mddev->queue, raid0_mergeable_bvec);
 	dump_zones(mddev);
+	md_integrity_register(mddev);
 	return 0;
 }
 
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 89939a7aef5..8726fd7ebce 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1123,8 +1123,8 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 	for (mirror = first; mirror <= last; mirror++)
 		if ( !(p=conf->mirrors+mirror)->rdev) {
 
-			blk_queue_stack_limits(mddev->queue,
-					       rdev->bdev->bd_disk->queue);
+			disk_stack_limits(mddev->gendisk, rdev->bdev,
+					  rdev->data_offset << 9);
 			/* as we don't honour merge_bvec_fn, we must never risk
 			 * violating it, so limit ->max_sector to one PAGE, as
 			 * a one page request is never in violation.
@@ -1144,7 +1144,7 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 			rcu_assign_pointer(p->rdev, rdev);
 			break;
 		}
-
+	md_integrity_add_rdev(rdev, mddev);
 	print_conf(conf);
 	return err;
 }
@@ -1178,7 +1178,9 @@ static int raid1_remove_disk(mddev_t *mddev, int number)
 			/* lost the race, try later */
 			err = -EBUSY;
 			p->rdev = rdev;
+			goto abort;
 		}
+		md_integrity_register(mddev);
 	}
 abort:
 
@@ -1988,9 +1990,8 @@ static int run(mddev_t *mddev)
 		disk = conf->mirrors + disk_idx;
 
 		disk->rdev = rdev;
-
-		blk_queue_stack_limits(mddev->queue,
-				       rdev->bdev->bd_disk->queue);
+		disk_stack_limits(mddev->gendisk, rdev->bdev,
+				  rdev->data_offset << 9);
 		/* as we don't honour merge_bvec_fn, we must never risk
 		 * violating it, so limit ->max_sector to one PAGE, as
 		 * a one page request is never in violation.
@@ -2068,7 +2069,7 @@ static int run(mddev_t *mddev)
 	mddev->queue->unplug_fn = raid1_unplug;
 	mddev->queue->backing_dev_info.congested_fn = raid1_congested;
 	mddev->queue->backing_dev_info.congested_data = mddev;
-
+	md_integrity_register(mddev);
 	return 0;
 
 out_no_mem:
@@ -2133,6 +2134,7 @@ static int raid1_resize(mddev_t *mddev, sector_t sectors)
 		return -EINVAL;
 	set_capacity(mddev->gendisk, mddev->array_sectors);
 	mddev->changed = 1;
+	revalidate_disk(mddev->gendisk);
 	if (sectors > mddev->dev_sectors &&
 	    mddev->recovery_cp == MaxSector) {
 		mddev->recovery_cp = mddev->dev_sectors;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index ae12ceafe10..3d9020cf6f6 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1151,8 +1151,8 @@ static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 	for ( ; mirror <= last ; mirror++)
 		if ( !(p=conf->mirrors+mirror)->rdev) {
 
-			blk_queue_stack_limits(mddev->queue,
-					       rdev->bdev->bd_disk->queue);
+			disk_stack_limits(mddev->gendisk, rdev->bdev,
+					  rdev->data_offset << 9);
 			/* as we don't honour merge_bvec_fn, we must never risk
 			 * violating it, so limit ->max_sector to one PAGE, as
 			 * a one page request is never in violation.
@@ -1170,6 +1170,7 @@ static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 			break;
 		}
 
+	md_integrity_add_rdev(rdev, mddev);
 	print_conf(conf);
 	return err;
 }
@@ -1203,7 +1204,9 @@ static int raid10_remove_disk(mddev_t *mddev, int number)
 			/* lost the race, try later */
 			err = -EBUSY;
 			p->rdev = rdev;
+			goto abort;
 		}
+		md_integrity_register(mddev);
 	}
 abort:
 
@@ -2044,7 +2047,7 @@ raid10_size(mddev_t *mddev, sector_t sectors, int raid_disks)
 static int run(mddev_t *mddev)
 {
 	conf_t *conf;
-	int i, disk_idx;
+	int i, disk_idx, chunk_size;
 	mirror_info_t *disk;
 	mdk_rdev_t *rdev;
 	int nc, fc, fo;
@@ -2130,6 +2133,14 @@ static int run(mddev_t *mddev)
 	spin_lock_init(&conf->device_lock);
 	mddev->queue->queue_lock = &conf->device_lock;
 
+	chunk_size = mddev->chunk_sectors << 9;
+	blk_queue_io_min(mddev->queue, chunk_size);
+	if (conf->raid_disks % conf->near_copies)
+		blk_queue_io_opt(mddev->queue, chunk_size * conf->raid_disks);
+	else
+		blk_queue_io_opt(mddev->queue, chunk_size *
+				 (conf->raid_disks / conf->near_copies));
+
 	list_for_each_entry(rdev, &mddev->disks, same_set) {
 		disk_idx = rdev->raid_disk;
 		if (disk_idx >= mddev->raid_disks
@@ -2138,9 +2149,8 @@ static int run(mddev_t *mddev)
 		disk = conf->mirrors + disk_idx;
 
 		disk->rdev = rdev;
-
-		blk_queue_stack_limits(mddev->queue,
-				       rdev->bdev->bd_disk->queue);
+		disk_stack_limits(mddev->gendisk, rdev->bdev,
+				  rdev->data_offset << 9);
 		/* as we don't honour merge_bvec_fn, we must never risk
 		 * violating it, so limit ->max_sector to one PAGE, as
 		 * a one page request is never in violation.
@@ -2218,6 +2228,7 @@ static int run(mddev_t *mddev)
 
 	if (conf->near_copies < mddev->raid_disks)
 		blk_queue_merge_bvec(mddev->queue, raid10_mergeable_bvec);
+	md_integrity_register(mddev);
 	return 0;
 
 out_free_conf:
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index f9f991e6e13..b8a2c5dc67b 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3699,13 +3699,21 @@ static int make_request(struct request_queue *q, struct bio * bi)
 					goto retry;
 				}
 			}
-			/* FIXME what if we get a false positive because these
-			 * are being updated.
-			 */
-			if (logical_sector >= mddev->suspend_lo &&
+
+			if (bio_data_dir(bi) == WRITE &&
+			    logical_sector >= mddev->suspend_lo &&
 			    logical_sector < mddev->suspend_hi) {
 				release_stripe(sh);
-				schedule();
+				/* As the suspend_* range is controlled by
+				 * userspace, we want an interruptible
+				 * wait.
+				 */
+				flush_signals(current);
+				prepare_to_wait(&conf->wait_for_overlap,
+						&w, TASK_INTERRUPTIBLE);
+				if (logical_sector >= mddev->suspend_lo &&
+				    logical_sector < mddev->suspend_hi)
+					schedule();
 				goto retry;
 			}
 
@@ -3777,7 +3785,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
 		    conf->reshape_progress < raid5_size(mddev, 0, 0)) {
 			sector_nr = raid5_size(mddev, 0, 0)
 				- conf->reshape_progress;
-		} else if (mddev->delta_disks > 0 &&
+		} else if (mddev->delta_disks >= 0 &&
 			   conf->reshape_progress > 0)
 			sector_nr = conf->reshape_progress;
 		sector_div(sector_nr, new_data_disks);
@@ -3991,6 +3999,9 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski
 		return 0;
 	}
 
+	/* Allow raid5_quiesce to complete */
+	wait_event(conf->wait_for_overlap, conf->quiesce != 2);
+
 	if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
 		return reshape_request(mddev, sector_nr, skipped);
 
@@ -4308,6 +4319,15 @@ raid5_size(mddev_t *mddev, sector_t sectors, int raid_disks)
 	return sectors * (raid_disks - conf->max_degraded);
 }
 
+static void free_conf(raid5_conf_t *conf)
+{
+	shrink_stripes(conf);
+	safe_put_page(conf->spare_page);
+	kfree(conf->disks);
+	kfree(conf->stripe_hashtbl);
+	kfree(conf);
+}
+
 static raid5_conf_t *setup_conf(mddev_t *mddev)
 {
 	raid5_conf_t *conf;
@@ -4439,11 +4459,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev)
 
  abort:
 	if (conf) {
-		shrink_stripes(conf);
-		safe_put_page(conf->spare_page);
-		kfree(conf->disks);
-		kfree(conf->stripe_hashtbl);
-		kfree(conf);
+		free_conf(conf);
 		return ERR_PTR(-EIO);
 	} else
 		return ERR_PTR(-ENOMEM);
@@ -4452,7 +4468,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev)
 static int run(mddev_t *mddev)
 {
 	raid5_conf_t *conf;
-	int working_disks = 0;
+	int working_disks = 0, chunk_size;
 	mdk_rdev_t *rdev;
 
 	if (mddev->recovery_cp != MaxSector)
@@ -4493,7 +4509,26 @@ static int run(mddev_t *mddev)
 			   (old_disks-max_degraded));
 		/* here_old is the first stripe that we might need to read
 		 * from */
-		if (here_new >= here_old) {
+		if (mddev->delta_disks == 0) {
+			/* We cannot be sure it is safe to start an in-place
+			 * reshape.  It is only safe if user-space if monitoring
+			 * and taking constant backups.
+			 * mdadm always starts a situation like this in
+			 * readonly mode so it can take control before
+			 * allowing any writes.  So just check for that.
+			 */
+			if ((here_new * mddev->new_chunk_sectors != 
+			     here_old * mddev->chunk_sectors) ||
+			    mddev->ro == 0) {
+				printk(KERN_ERR "raid5: in-place reshape must be started"
+				       " in read-only mode - aborting\n");
+				return -EINVAL;
+			}
+		} else if (mddev->delta_disks < 0
+		    ? (here_new * mddev->new_chunk_sectors <=
+		       here_old * mddev->chunk_sectors)
+		    : (here_new * mddev->new_chunk_sectors >=
+		       here_old * mddev->chunk_sectors)) {
 			/* Reading from the same stripe as writing to - bad */
 			printk(KERN_ERR "raid5: reshape_position too early for "
 			       "auto-recovery - aborting.\n");
@@ -4607,18 +4642,22 @@ static int run(mddev_t *mddev)
 	md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
 
 	blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec);
+	chunk_size = mddev->chunk_sectors << 9;
+	blk_queue_io_min(mddev->queue, chunk_size);
+	blk_queue_io_opt(mddev->queue, chunk_size *
+			 (conf->raid_disks - conf->max_degraded));
+
+	list_for_each_entry(rdev, &mddev->disks, same_set)
+		disk_stack_limits(mddev->gendisk, rdev->bdev,
+				  rdev->data_offset << 9);
 
 	return 0;
 abort:
 	md_unregister_thread(mddev->thread);
 	mddev->thread = NULL;
 	if (conf) {
-		shrink_stripes(conf);
 		print_raid5_conf(conf);
-		safe_put_page(conf->spare_page);
-		kfree(conf->disks);
-		kfree(conf->stripe_hashtbl);
-		kfree(conf);
+		free_conf(conf);
 	}
 	mddev->private = NULL;
 	printk(KERN_ALERT "raid5: failed to run raid set %s\n", mdname(mddev));
@@ -4633,13 +4672,10 @@ static int stop(mddev_t *mddev)
 
 	md_unregister_thread(mddev->thread);
 	mddev->thread = NULL;
-	shrink_stripes(conf);
-	kfree(conf->stripe_hashtbl);
 	mddev->queue->backing_dev_info.congested_fn = NULL;
 	blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
 	sysfs_remove_group(&mddev->kobj, &raid5_attrs_group);
-	kfree(conf->disks);
-	kfree(conf);
+	free_conf(conf);
 	mddev->private = NULL;
 	return 0;
 }
@@ -4841,6 +4877,7 @@ static int raid5_resize(mddev_t *mddev, sector_t sectors)
 		return -EINVAL;
 	set_capacity(mddev->gendisk, mddev->array_sectors);
 	mddev->changed = 1;
+	revalidate_disk(mddev->gendisk);
 	if (sectors > mddev->dev_sectors && mddev->recovery_cp == MaxSector) {
 		mddev->recovery_cp = mddev->dev_sectors;
 		set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
@@ -4986,7 +5023,7 @@ static int raid5_start_reshape(mddev_t *mddev)
 		spin_unlock_irqrestore(&conf->device_lock, flags);
 	}
 	mddev->raid_disks = conf->raid_disks;
-	mddev->reshape_position = 0;
+	mddev->reshape_position = conf->reshape_progress;
 	set_bit(MD_CHANGE_DEVS, &mddev->flags);
 
 	clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
@@ -5041,7 +5078,6 @@ static void end_reshape(raid5_conf_t *conf)
  */
 static void raid5_finish_reshape(mddev_t *mddev)
 {
-	struct block_device *bdev;
 	raid5_conf_t *conf = mddev->private;
 
 	if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
@@ -5050,15 +5086,7 @@ static void raid5_finish_reshape(mddev_t *mddev)
 			md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
 			set_capacity(mddev->gendisk, mddev->array_sectors);
 			mddev->changed = 1;
-
-			bdev = bdget_disk(mddev->gendisk, 0);
-			if (bdev) {
-				mutex_lock(&bdev->bd_inode->i_mutex);
-				i_size_write(bdev->bd_inode,
-					     (loff_t)mddev->array_sectors << 9);
-				mutex_unlock(&bdev->bd_inode->i_mutex);
-				bdput(bdev);
-			}
+			revalidate_disk(mddev->gendisk);
 		} else {
 			int d;
 			mddev->degraded = conf->raid_disks;
@@ -5069,8 +5097,15 @@ static void raid5_finish_reshape(mddev_t *mddev)
 					mddev->degraded--;
 			for (d = conf->raid_disks ;
 			     d < conf->raid_disks - mddev->delta_disks;
-			     d++)
-				raid5_remove_disk(mddev, d);
+			     d++) {
+				mdk_rdev_t *rdev = conf->disks[d].rdev;
+				if (rdev && raid5_remove_disk(mddev, d) == 0) {
+					char nm[20];
+					sprintf(nm, "rd%d", rdev->raid_disk);
+					sysfs_remove_link(&mddev->kobj, nm);
+					rdev->raid_disk = -1;
+				}
+			}
 		}
 		mddev->layout = conf->algorithm;
 		mddev->chunk_sectors = conf->chunk_sectors;
@@ -5090,12 +5125,18 @@ static void raid5_quiesce(mddev_t *mddev, int state)
 
 	case 1: /* stop all writes */
 		spin_lock_irq(&conf->device_lock);
-		conf->quiesce = 1;
+		/* '2' tells resync/reshape to pause so that all
+		 * active stripes can drain
+		 */
+		conf->quiesce = 2;
 		wait_event_lock_irq(conf->wait_for_stripe,
 				    atomic_read(&conf->active_stripes) == 0 &&
 				    atomic_read(&conf->active_aligned_reads) == 0,
 				    conf->device_lock, /* nothing */);
+		conf->quiesce = 1;
 		spin_unlock_irq(&conf->device_lock);
+		/* allow reshape to continue */
+		wake_up(&conf->wait_for_overlap);
 		break;
 
 	case 0: /* re-enable writes */
diff --git a/drivers/media/common/tuners/qt1010.c b/drivers/media/common/tuners/qt1010.c
index 825aa1412e6..9f5dba244cb 100644
--- a/drivers/media/common/tuners/qt1010.c
+++ b/drivers/media/common/tuners/qt1010.c
@@ -64,24 +64,22 @@ static int qt1010_writereg(struct qt1010_priv *priv, u8 reg, u8 val)
 /* dump all registers */
 static void qt1010_dump_regs(struct qt1010_priv *priv)
 {
-	char buf[52], buf2[4];
 	u8 reg, val;
 
 	for (reg = 0; ; reg++) {
 		if (reg % 16 == 0) {
 			if (reg)
-				printk("%s\n", buf);
-			sprintf(buf, "%02x: ", reg);
+				printk(KERN_CONT "\n");
+			printk(KERN_DEBUG "%02x:", reg);
 		}
 		if (qt1010_readreg(priv, reg, &val) == 0)
-			sprintf(buf2, "%02x ", val);
+			printk(KERN_CONT " %02x", val);
 		else
-			strcpy(buf2, "-- ");
-		strcat(buf, buf2);
+			printk(KERN_CONT " --");
 		if (reg == 0x2f)
 			break;
 	}
-	printk("%s\n", buf);
+	printk(KERN_CONT "\n");
 }
 
 static int qt1010_set_params(struct dvb_frontend *fe,
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c
index b6da9c3873f..f270e605da8 100644
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -1096,8 +1096,19 @@ static int xc2028_set_params(struct dvb_frontend *fe,
 	}
 
 	/* All S-code tables need a 200kHz shift */
-	if (priv->ctrl.demod)
+	if (priv->ctrl.demod) {
 		demod = priv->ctrl.demod + 200;
+		/*
+		 * The DTV7 S-code table needs a 700 kHz shift.
+		 * Thanks to Terry Wu <terrywu2009@gmail.com> for reporting this
+		 *
+		 * DTV7 is only used in Australia.  Germany or Italy may also
+		 * use this firmware after initialization, but a tune to a UHF
+		 * channel should then cause DTV78 to be used.
+		 */
+		if (type & DTV7)
+			demod += 500;
+	}
 
 	return generic_set_freq(fe, p->frequency,
 				T_DIGITAL_TV, type, 0, demod);
@@ -1108,8 +1119,8 @@ static int xc2028_sleep(struct dvb_frontend *fe)
 	struct xc2028_data *priv = fe->tuner_priv;
 	int rc = 0;
 
-	/* Avoid firmware reload on slow devices */
-	if (no_poweroff)
+	/* Avoid firmware reload on slow devices or if PM disabled */
+	if (no_poweroff || priv->ctrl.disable_power_mgmt)
 		return 0;
 
 	tuner_dbg("Putting xc2028/3028 into poweroff mode.\n");
diff --git a/drivers/media/common/tuners/tuner-xc2028.h b/drivers/media/common/tuners/tuner-xc2028.h
index 19de7928a74..a90c35d50ad 100644
--- a/drivers/media/common/tuners/tuner-xc2028.h
+++ b/drivers/media/common/tuners/tuner-xc2028.h
@@ -38,6 +38,7 @@ struct xc2028_ctrl {
 	unsigned int		input1:1;
 	unsigned int		vhfbw7:1;
 	unsigned int		uhfbw8:1;
+	unsigned int		disable_power_mgmt:1;
 	unsigned int		demod;
 	enum firmware_type	type:2;
 };
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index efb4a6c2b57..9a6307a347b 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -20,8 +20,14 @@
 #include "tuner-simple.h"
 #include "stv0297.h"
 
+
+/* Can we use the specified front-end?  Remember that if we are compiled
+ * into the kernel we can't call code that's in modules.  */
+#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \
+	(defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE)))
+
 /* lnb control */
-#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)
 static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
@@ -49,8 +55,7 @@ static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage
 }
 #endif
 
-#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \
-	|| defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312)
 static int flexcop_sleep(struct dvb_frontend* fe)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
@@ -61,7 +66,7 @@ static int flexcop_sleep(struct dvb_frontend* fe)
 #endif
 
 /* SkyStar2 DVB-S rev 2.3 */
-#if defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(MT312)
 static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
 {
 /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
@@ -193,10 +198,12 @@ static int skystar2_rev23_attach(struct flexcop_device *fc,
 	}
 	return 0;
 }
+#else
+#define skystar2_rev23_attach NULL
 #endif
 
 /* SkyStar2 DVB-S rev 2.6 */
-#if defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(STV0299)
 static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
 	u32 srate, u32 ratio)
 {
@@ -321,10 +328,12 @@ static int skystar2_rev26_attach(struct flexcop_device *fc,
 	}
 	return 0;
 }
+#else
+#define skystar2_rev26_attach NULL
 #endif
 
 /* SkyStar2 DVB-S rev 2.7 */
-#if defined(CONFIG_DVB_S5H1420_MODULE)
+#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000)
 static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
 	.demod_address = 0x53,
 	.invert = 1,
@@ -385,10 +394,12 @@ fail:
 	fc->fc_i2c_adap[0].no_base_addr = 0;
 	return 0;
 }
+#else
+#define skystar2_rev27_attach NULL
 #endif
 
 /* SkyStar2 rev 2.8 */
-#if defined(CONFIG_DVB_CX24123_MODULE)
+#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113)
 static struct cx24123_config skystar2_rev2_8_cx24123_config = {
 	.demod_address = 0x55,
 	.dont_use_pll = 1,
@@ -433,10 +444,12 @@ static int skystar2_rev28_attach(struct flexcop_device *fc,
 	 * IR-receiver (PIC16F818) - but the card has no input for that ??? */
 	return 1;
 }
+#else
+#define skystar2_rev28_attach NULL
 #endif
 
 /* AirStar DVB-T */
-#if defined(CONFIG_DVB_MT352_MODULE)
+#if FE_SUPPORTED(MT352)
 static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
 {
 	static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
@@ -495,10 +508,12 @@ static int airstar_dvbt_attach(struct flexcop_device *fc,
 	}
 	return 0;
 }
+#else
+#define airstar_dvbt_attach NULL
 #endif
 
 /* AirStar ATSC 1st generation */
-#if defined(CONFIG_DVB_BCM3510_MODULE)
+#if FE_SUPPORTED(BCM3510)
 static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
 	const struct firmware **fw, char* name)
 {
@@ -517,10 +532,12 @@ static int airstar_atsc1_attach(struct flexcop_device *fc,
 	fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
 	return fc->fe != NULL;
 }
+#else
+#define airstar_atsc1_attach NULL
 #endif
 
 /* AirStar ATSC 2nd generation */
-#if defined(CONFIG_DVB_NXT200X_MODULE)
+#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL)
 static struct nxt200x_config samsung_tbmv_config = {
 	.demod_address = 0x0a,
 };
@@ -535,10 +552,12 @@ static int airstar_atsc2_attach(struct flexcop_device *fc,
 	return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
 			    DVB_PLL_SAMSUNG_TBMV);
 }
+#else
+#define airstar_atsc2_attach NULL
 #endif
 
 /* AirStar ATSC 3rd generation */
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
+#if FE_SUPPORTED(LGDT330X)
 static struct lgdt330x_config air2pc_atsc_hd5000_config = {
 	.demod_address       = 0x59,
 	.demod_chip          = LGDT3303,
@@ -556,10 +575,12 @@ static int airstar_atsc3_attach(struct flexcop_device *fc,
 	return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
 			    TUNER_LG_TDVS_H06XF);
 }
+#else
+#define airstar_atsc3_attach NULL
 #endif
 
 /* CableStar2 DVB-C */
-#if defined(CONFIG_DVB_STV0297_MODULE)
+#if FE_SUPPORTED(STV0297)
 static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
 		struct dvb_frontend_parameters *fep)
 {
@@ -698,39 +719,23 @@ static int cablestar2_attach(struct flexcop_device *fc,
 	fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
 	return 1;
 }
+#else
+#define cablestar2_attach NULL
 #endif
 
 static struct {
 	flexcop_device_type_t type;
 	int (*attach)(struct flexcop_device *, struct i2c_adapter *);
 } flexcop_frontends[] = {
-#if defined(CONFIG_DVB_S5H1420_MODULE)
 	{ FC_SKY_REV27, skystar2_rev27_attach },
-#endif
-#if defined(CONFIG_DVB_CX24123_MODULE)
 	{ FC_SKY_REV28, skystar2_rev28_attach },
-#endif
-#if defined(CONFIG_DVB_STV0299_MODULE)
 	{ FC_SKY_REV26, skystar2_rev26_attach },
-#endif
-#if defined(CONFIG_DVB_MT352_MODULE)
 	{ FC_AIR_DVBT, airstar_dvbt_attach },
-#endif
-#if defined(CONFIG_DVB_NXT200X_MODULE)
 	{ FC_AIR_ATSC2, airstar_atsc2_attach },
-#endif
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
 	{ FC_AIR_ATSC3, airstar_atsc3_attach },
-#endif
-#if defined(CONFIG_DVB_BCM3510_MODULE)
 	{ FC_AIR_ATSC1, airstar_atsc1_attach },
-#endif
-#if defined(CONFIG_DVB_STV0297_MODULE)
 	{ FC_CABLE, cablestar2_attach },
-#endif
-#if defined(CONFIG_DVB_MT312_MODULE)
 	{ FC_SKY_REV23, skystar2_rev23_attach },
-#endif
 };
 
 /* try to figure out the frontend */
@@ -738,6 +743,8 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 {
 	int i;
 	for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
+		if (!flexcop_frontends[i].attach)
+			continue;
 		/* type needs to be set before, because of some workarounds
 		 * done based on the probed card type */
 		fc->dev_type = flexcop_frontends[i].type;
diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c
index 4601b059b2b..0e246eaad05 100644
--- a/drivers/media/dvb/bt8xx/dst_ca.c
+++ b/drivers/media/dvb/bt8xx/dst_ca.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/dvb/ca.h>
 #include "dvbdev.h"
diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h
index 79927305e84..487919bea7a 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.h
+++ b/drivers/media/dvb/dvb-core/dvbdev.h
@@ -27,7 +27,6 @@
 #include <linux/poll.h>
 #include <linux/fs.h>
 #include <linux/list.h>
-#include <linux/smp_lock.h>
 
 #define DVB_MAJOR 212
 
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 4cb31e7c13c..26690dfb326 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -81,7 +81,6 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 
 	switch (req->cmd) {
 	case GET_CONFIG:
-	case BOOT:
 	case READ_MEMORY:
 	case RECONNECT_USB:
 	case GET_IR_CODE:
@@ -100,6 +99,7 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 	case WRITE_VIRTUAL_MEMORY:
 	case COPY_FIRMWARE:
 	case DOWNLOAD_FIRMWARE:
+	case BOOT:
 		break;
 	default:
 		err("unknown command:%d", req->cmd);
diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c
index 136c5863d81..12e018b4107 100644
--- a/drivers/media/dvb/frontends/af9013.c
+++ b/drivers/media/dvb/frontends/af9013.c
@@ -527,6 +527,10 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 	u8 i, buf[3] = {0, 0, 0};
 	*auto_mode = 0; /* set if parameters are requested to auto set */
 
+	/* Try auto-detect transmission parameters in case of AUTO requested or
+	   garbage parameters given by application for compatibility.
+	   MPlayer seems to provide garbage parameters currently. */
+
 	switch (params->transmission_mode) {
 	case TRANSMISSION_MODE_AUTO:
 		*auto_mode = 1;
@@ -536,7 +540,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 		buf[0] |= (1 << 0);
 		break;
 	default:
-		return -EINVAL;
+		deb_info("%s: invalid transmission_mode\n", __func__);
+		*auto_mode = 1;
 	}
 
 	switch (params->guard_interval) {
@@ -554,7 +559,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 		buf[0] |= (3 << 2);
 		break;
 	default:
-		return -EINVAL;
+		deb_info("%s: invalid guard_interval\n", __func__);
+		*auto_mode = 1;
 	}
 
 	switch (params->hierarchy_information) {
@@ -572,7 +578,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 		buf[0] |= (3 << 4);
 		break;
 	default:
-		return -EINVAL;
+		deb_info("%s: invalid hierarchy_information\n", __func__);
+		*auto_mode = 1;
 	};
 
 	switch (params->constellation) {
@@ -587,7 +594,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 		buf[1] |= (2 << 6);
 		break;
 	default:
-		return -EINVAL;
+		deb_info("%s: invalid constellation\n", __func__);
+		*auto_mode = 1;
 	}
 
 	/* Use HP. How and which case we can switch to LP? */
@@ -611,7 +619,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 		buf[2] |= (4 << 0);
 		break;
 	default:
-		return -EINVAL;
+		deb_info("%s: invalid code_rate_HP\n", __func__);
+		*auto_mode = 1;
 	}
 
 	switch (params->code_rate_LP) {
@@ -638,7 +647,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 		if (params->hierarchy_information == HIERARCHY_AUTO)
 			break;
 	default:
-		return -EINVAL;
+		deb_info("%s: invalid code_rate_LP\n", __func__);
+		*auto_mode = 1;
 	}
 
 	switch (params->bandwidth) {
@@ -651,7 +661,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 		buf[1] |= (2 << 2);
 		break;
 	default:
-		return -EINVAL;
+		deb_info("%s: invalid bandwidth\n", __func__);
+		buf[1] |= (2 << 2); /* cannot auto-detect BW, try 8 MHz */
 	}
 
 	/* program */
diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c
index ace5cb17165..fbd838eca26 100644
--- a/drivers/media/dvb/frontends/cx22700.c
+++ b/drivers/media/dvb/frontends/cx22700.c
@@ -380,7 +380,7 @@ struct dvb_frontend* cx22700_attach(const struct cx22700_config* config,
 	struct cx22700_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct cx22700_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct cx22700_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c
index 5d1abe34bdd..00b5c7e91d5 100644
--- a/drivers/media/dvb/frontends/cx22702.c
+++ b/drivers/media/dvb/frontends/cx22702.c
@@ -580,7 +580,7 @@ struct dvb_frontend *cx22702_attach(const struct cx22702_config *config,
 	struct cx22702_state *state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct cx22702_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct cx22702_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index 87ae29db024..ffbcfabd83f 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -598,7 +598,7 @@ struct dvb_frontend* cx24110_attach(const struct cx24110_config* config,
 	int ret;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct cx24110_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct cx24110_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.c b/drivers/media/dvb/frontends/dvb_dummy_fe.c
index db8a937cc63..a7fc7e53a55 100644
--- a/drivers/media/dvb/frontends/dvb_dummy_fe.c
+++ b/drivers/media/dvb/frontends/dvb_dummy_fe.c
@@ -117,7 +117,7 @@ struct dvb_frontend* dvb_dummy_fe_ofdm_attach(void)
 	struct dvb_dummy_fe_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* create dvb_frontend */
@@ -137,7 +137,7 @@ struct dvb_frontend *dvb_dummy_fe_qpsk_attach(void)
 	struct dvb_dummy_fe_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* create dvb_frontend */
@@ -157,7 +157,7 @@ struct dvb_frontend *dvb_dummy_fe_qam_attach(void)
 	struct dvb_dummy_fe_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* create dvb_frontend */
diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c
index e1e70e9e0cb..3051b64aa17 100644
--- a/drivers/media/dvb/frontends/l64781.c
+++ b/drivers/media/dvb/frontends/l64781.c
@@ -501,7 +501,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config,
 			   { .addr = config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct l64781_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct l64781_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/lgs8gl5.c b/drivers/media/dvb/frontends/lgs8gl5.c
index 855852fddf2..bb37ed289a0 100644
--- a/drivers/media/dvb/frontends/lgs8gl5.c
+++ b/drivers/media/dvb/frontends/lgs8gl5.c
@@ -387,7 +387,7 @@ lgs8gl5_attach(const struct lgs8gl5_config *config, struct i2c_adapter *i2c)
 	dprintk("%s\n", __func__);
 
 	/* Allocate memory for the internal state */
-	state = kmalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index a621f727935..f69daaac78c 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -782,7 +782,7 @@ struct dvb_frontend *mt312_attach(const struct mt312_config *config,
 	struct mt312_state *state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct mt312_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 
diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c
index 0eef22dbf8a..a763ec756f7 100644
--- a/drivers/media/dvb/frontends/nxt6000.c
+++ b/drivers/media/dvb/frontends/nxt6000.c
@@ -545,7 +545,7 @@ struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config,
 	struct nxt6000_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index 8133ea3cddd..38e67accb8c 100644
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -562,7 +562,7 @@ struct dvb_frontend* or51132_attach(const struct or51132_config* config,
 	struct or51132_state* state = NULL;
 
 	/* Allocate memory for the internal state */
-	state = kmalloc(sizeof(struct or51132_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct or51132_state), GFP_KERNEL);
 	if (state == NULL)
 		return NULL;
 
diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb/frontends/or51211.c
index 16cf2fdd5d7..c709ce6771c 100644
--- a/drivers/media/dvb/frontends/or51211.c
+++ b/drivers/media/dvb/frontends/or51211.c
@@ -527,7 +527,7 @@ struct dvb_frontend* or51211_attach(const struct or51211_config* config,
 	struct or51211_state* state = NULL;
 
 	/* Allocate memory for the internal state */
-	state = kmalloc(sizeof(struct or51211_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct or51211_state), GFP_KERNEL);
 	if (state == NULL)
 		return NULL;
 
diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c
index 3e08d985d6e..fb301151842 100644
--- a/drivers/media/dvb/frontends/s5h1409.c
+++ b/drivers/media/dvb/frontends/s5h1409.c
@@ -796,7 +796,7 @@ struct dvb_frontend *s5h1409_attach(const struct s5h1409_config *config,
 	u16 reg;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct s5h1409_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct s5h1409_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 
diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c
index 66e2dd6d6fe..d8adf1e3201 100644
--- a/drivers/media/dvb/frontends/s5h1411.c
+++ b/drivers/media/dvb/frontends/s5h1411.c
@@ -844,7 +844,7 @@ struct dvb_frontend *s5h1411_attach(const struct s5h1411_config *config,
 	u16 reg;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct s5h1411_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct s5h1411_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 
diff --git a/drivers/media/dvb/frontends/si21xx.c b/drivers/media/dvb/frontends/si21xx.c
index 0bd16af8a6c..9552a22ccff 100644
--- a/drivers/media/dvb/frontends/si21xx.c
+++ b/drivers/media/dvb/frontends/si21xx.c
@@ -928,7 +928,7 @@ struct dvb_frontend *si21xx_attach(const struct si21xx_config *config,
 	dprintk("%s\n", __func__);
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct si21xx_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct si21xx_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 
diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c
index 1c9a9b4051b..b85eb60a893 100644
--- a/drivers/media/dvb/frontends/sp8870.c
+++ b/drivers/media/dvb/frontends/sp8870.c
@@ -557,7 +557,7 @@ struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
 	struct sp8870_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct sp8870_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct sp8870_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c
index 559509ab4da..4a7c3d84260 100644
--- a/drivers/media/dvb/frontends/sp887x.c
+++ b/drivers/media/dvb/frontends/sp887x.c
@@ -557,7 +557,7 @@ struct dvb_frontend* sp887x_attach(const struct sp887x_config* config,
 	struct sp887x_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct sp887x_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct sp887x_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/stv0288.c b/drivers/media/dvb/frontends/stv0288.c
index ff1194de34c..2930a5d6768 100644
--- a/drivers/media/dvb/frontends/stv0288.c
+++ b/drivers/media/dvb/frontends/stv0288.c
@@ -570,7 +570,7 @@ struct dvb_frontend *stv0288_attach(const struct stv0288_config *config,
 	int id;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct stv0288_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct stv0288_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 
diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c
index 62caf802ed9..4fd7479bb62 100644
--- a/drivers/media/dvb/frontends/stv0297.c
+++ b/drivers/media/dvb/frontends/stv0297.c
@@ -663,7 +663,7 @@ struct dvb_frontend *stv0297_attach(const struct stv0297_config *config,
 	struct stv0297_state *state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct stv0297_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct stv0297_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 
diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c
index 6c1cb1973c6..96887446972 100644
--- a/drivers/media/dvb/frontends/stv0299.c
+++ b/drivers/media/dvb/frontends/stv0299.c
@@ -667,7 +667,7 @@ struct dvb_frontend* stv0299_attach(const struct stv0299_config* config,
 	int id;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct stv0299_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct stv0299_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index f648fdb64bb..f5d7b3277a2 100644
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -413,7 +413,7 @@ struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config,
 	u8 id;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct tda10021_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tda10021_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c
index cc8862ce4aa..4e2a7c8b2f6 100644
--- a/drivers/media/dvb/frontends/tda10048.c
+++ b/drivers/media/dvb/frontends/tda10048.c
@@ -1095,7 +1095,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
 	dprintk(1, "%s()\n", __func__);
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct tda10048_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tda10048_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index 4981cef8b44..f2a8abe0a24 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -1269,7 +1269,7 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
 	int id;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
 	if (!state) {
 		printk(KERN_ERR "Can't alocate memory for tda10045 state\n");
 		return NULL;
@@ -1339,7 +1339,7 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
 	int id;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
 	if (!state) {
 		printk(KERN_ERR "Can't alocate memory for tda10046 state\n");
 		return NULL;
diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c
index a17ce3c4ad8..f2c8faac6f3 100644
--- a/drivers/media/dvb/frontends/tda10086.c
+++ b/drivers/media/dvb/frontends/tda10086.c
@@ -745,7 +745,7 @@ struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
 	dprintk ("%s\n", __func__);
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct tda10086_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tda10086_state), GFP_KERNEL);
 	if (!state)
 		return NULL;
 
diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c
index 5b843b2e67e..9369f7442f2 100644
--- a/drivers/media/dvb/frontends/tda8083.c
+++ b/drivers/media/dvb/frontends/tda8083.c
@@ -417,7 +417,7 @@ struct dvb_frontend* tda8083_attach(const struct tda8083_config* config,
 	struct tda8083_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct tda8083_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tda8083_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/ves1820.c b/drivers/media/dvb/frontends/ves1820.c
index a184597f1d9..6e78e486551 100644
--- a/drivers/media/dvb/frontends/ves1820.c
+++ b/drivers/media/dvb/frontends/ves1820.c
@@ -374,7 +374,7 @@ struct dvb_frontend* ves1820_attach(const struct ves1820_config* config,
 	struct ves1820_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct ves1820_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct ves1820_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 
diff --git a/drivers/media/dvb/frontends/ves1x93.c b/drivers/media/dvb/frontends/ves1x93.c
index bd558960bd8..8d7854c2fb0 100644
--- a/drivers/media/dvb/frontends/ves1x93.c
+++ b/drivers/media/dvb/frontends/ves1x93.c
@@ -456,7 +456,7 @@ struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
 	u8 identity;
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c
index 148b6f7f6cb..66f5c1fb307 100644
--- a/drivers/media/dvb/frontends/zl10353.c
+++ b/drivers/media/dvb/frontends/zl10353.c
@@ -98,7 +98,6 @@ static int zl10353_read_register(struct zl10353_state *state, u8 reg)
 static void zl10353_dump_regs(struct dvb_frontend *fe)
 {
 	struct zl10353_state *state = fe->demodulator_priv;
-	char buf[52], buf2[4];
 	int ret;
 	u8 reg;
 
@@ -106,19 +105,18 @@ static void zl10353_dump_regs(struct dvb_frontend *fe)
 	for (reg = 0; ; reg++) {
 		if (reg % 16 == 0) {
 			if (reg)
-				printk(KERN_DEBUG "%s\n", buf);
-			sprintf(buf, "%02x: ", reg);
+				printk(KERN_CONT "\n");
+			printk(KERN_DEBUG "%02x:", reg);
 		}
 		ret = zl10353_read_register(state, reg);
 		if (ret >= 0)
-			sprintf(buf2, "%02x ", (u8)ret);
+			printk(KERN_CONT " %02x", (u8)ret);
 		else
-			strcpy(buf2, "-- ");
-		strcat(buf, buf2);
+			printk(KERN_CONT " --");
 		if (reg == 0xff)
 			break;
 	}
-	printk(KERN_DEBUG "%s\n", buf);
+	printk(KERN_CONT "\n");
 }
 
 static void zl10353_calc_nominal_rate(struct dvb_frontend *fe,
diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig
index dd863f26167..8c1aed77ea3 100644
--- a/drivers/media/dvb/siano/Kconfig
+++ b/drivers/media/dvb/siano/Kconfig
@@ -2,25 +2,33 @@
 # Siano Mobile Silicon Digital TV device configuration
 #
 
-config DVB_SIANO_SMS1XXX
-	tristate "Siano SMS1XXX USB dongle support"
-	depends on DVB_CORE && USB
+config SMS_SIANO_MDTV
+	tristate "Siano SMS1xxx based MDTV receiver"
+	depends on DVB_CORE && INPUT
 	---help---
-	  Choose Y here if you have a USB dongle with a SMS1XXX chipset.
+	  Choose Y or M here if you have MDTV receiver with a Siano chipset.
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called sms1xxx.
+	  To compile this driver as a module, choose M here
+	  (The module will be called smsmdtv).
 
-config DVB_SIANO_SMS1XXX_SMS_IDS
-	bool "Enable support for Siano Mobile Silicon default USB IDs"
-	depends on DVB_SIANO_SMS1XXX
-	default y
-	---help---
-	  Choose Y here if you have a USB dongle with a SMS1XXX chipset
-	  that uses Siano Mobile Silicon's default usb vid:pid.
+	  Further documentation on this driver can be found on the WWW
+	  at http://www.siano-ms.com/
+
+if SMS_SIANO_MDTV
+menu "Siano module components"
 
-	  Choose N here if you would prefer to use Siano's external driver.
+# Hardware interfaces support
 
-	  Further documentation on this driver can be found on the WWW at
-	  <http://www.siano-ms.com/>.
+config SMS_USB_DRV
+	tristate "USB interface support"
+	depends on DVB_CORE && USB
+	---help---
+	  Choose if you would like to have Siano's support for USB interface
 
+config SMS_SDIO_DRV
+	tristate "SDIO interface support"
+	depends on DVB_CORE && MMC
+	---help---
+	  Choose if you would like to have Siano's support for SDIO interface
+endmenu
+endif # SMS_SIANO_MDTV
diff --git a/drivers/media/dvb/siano/Makefile b/drivers/media/dvb/siano/Makefile
index c6644d90943..c54140b5ab5 100644
--- a/drivers/media/dvb/siano/Makefile
+++ b/drivers/media/dvb/siano/Makefile
@@ -1,8 +1,9 @@
-sms1xxx-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
 
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += sms1xxx.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsusb.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsdvb.o
+smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
+
+obj-$(CONFIG_SMS_SIANO_MDTV) += smsmdtv.o smsdvb.o
+obj-$(CONFIG_SMS_USB_DRV) += smsusb.o
+obj-$(CONFIG_SMS_SDIO_DRV) += smssdio.o
 
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
 
diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
index d8b15d583bd..0420e2885e7 100644
--- a/drivers/media/dvb/siano/sms-cards.c
+++ b/drivers/media/dvb/siano/sms-cards.c
@@ -116,99 +116,21 @@ static inline void sms_gpio_assign_11xx_default_led_config(
 
 int sms_board_event(struct smscore_device_t *coredev,
 		enum SMS_BOARD_EVENTS gevent) {
-	int board_id = smscore_get_board_id(coredev);
-	struct sms_board *board = sms_get_board(board_id);
 	struct smscore_gpio_config MyGpioConfig;
 
 	sms_gpio_assign_11xx_default_led_config(&MyGpioConfig);
 
 	switch (gevent) {
 	case BOARD_EVENT_POWER_INIT: /* including hotplug */
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			/* set I/O and turn off all LEDs */
-			smscore_gpio_configure(coredev,
-					board->board_cfg.leds_power,
-					&MyGpioConfig);
-			smscore_gpio_set_level(coredev,
-					board->board_cfg.leds_power, 0);
-			smscore_gpio_configure(coredev, board->board_cfg.led0,
-					&MyGpioConfig);
-			smscore_gpio_set_level(coredev,
-					board->board_cfg.led0, 0);
-			smscore_gpio_configure(coredev, board->board_cfg.led1,
-					&MyGpioConfig);
-			smscore_gpio_set_level(coredev,
-					board->board_cfg.led1, 0);
-			break;
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
-			/* set I/O and turn off LNA */
-			smscore_gpio_configure(coredev,
-					board->board_cfg.foreign_lna0_ctrl,
-					&MyGpioConfig);
-			smscore_gpio_set_level(coredev,
-					board->board_cfg.foreign_lna0_ctrl,
-					0);
-			break;
-		}
 		break; /* BOARD_EVENT_BIND */
 
 	case BOARD_EVENT_POWER_SUSPEND:
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.leds_power, 0);
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.led0, 0);
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.led1, 0);
-			break;
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
-			smscore_gpio_set_level(coredev,
-					board->board_cfg.foreign_lna0_ctrl,
-					0);
-			break;
-		}
 		break; /* BOARD_EVENT_POWER_SUSPEND */
 
 	case BOARD_EVENT_POWER_RESUME:
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.leds_power, 1);
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.led0, 1);
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.led1, 0);
-			break;
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
-			smscore_gpio_set_level(coredev,
-					board->board_cfg.foreign_lna0_ctrl,
-					1);
-			break;
-		}
 		break; /* BOARD_EVENT_POWER_RESUME */
 
 	case BOARD_EVENT_BIND:
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			smscore_gpio_set_level(coredev,
-				board->board_cfg.leds_power, 1);
-			smscore_gpio_set_level(coredev,
-				board->board_cfg.led0, 1);
-			smscore_gpio_set_level(coredev,
-				board->board_cfg.led1, 0);
-			break;
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
-		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
-			smscore_gpio_set_level(coredev,
-					board->board_cfg.foreign_lna0_ctrl,
-					1);
-			break;
-		}
 		break; /* BOARD_EVENT_BIND */
 
 	case BOARD_EVENT_SCAN_PROG:
@@ -218,20 +140,8 @@ int sms_board_event(struct smscore_device_t *coredev,
 	case BOARD_EVENT_EMERGENCY_WARNING_SIGNAL:
 		break; /* BOARD_EVENT_EMERGENCY_WARNING_SIGNAL */
 	case BOARD_EVENT_FE_LOCK:
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			smscore_gpio_set_level(coredev,
-			board->board_cfg.led1, 1);
-			break;
-		}
 		break; /* BOARD_EVENT_FE_LOCK */
 	case BOARD_EVENT_FE_UNLOCK:
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.led1, 0);
-			break;
-		}
 		break; /* BOARD_EVENT_FE_UNLOCK */
 	case BOARD_EVENT_DEMOD_LOCK:
 		break; /* BOARD_EVENT_DEMOD_LOCK */
@@ -248,20 +158,8 @@ int sms_board_event(struct smscore_device_t *coredev,
 	case BOARD_EVENT_RECEPTION_LOST_0:
 		break; /* BOARD_EVENT_RECEPTION_LOST_0 */
 	case BOARD_EVENT_MULTIPLEX_OK:
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.led1, 1);
-			break;
-		}
 		break; /* BOARD_EVENT_MULTIPLEX_OK */
 	case BOARD_EVENT_MULTIPLEX_ERRORS:
-		switch (board_id) {
-		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
-			smscore_gpio_set_level(coredev,
-						board->board_cfg.led1, 0);
-			break;
-		}
 		break; /* BOARD_EVENT_MULTIPLEX_ERRORS */
 
 	default:
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index a246903c334..bd9ab9d0d12 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -816,7 +816,7 @@ int smscore_set_device_mode(struct smscore_device_t *coredev, int mode)
 
 	sms_debug("set device mode to %d", mode);
 	if (coredev->device_flags & SMS_DEVICE_FAMILY2) {
-		if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_RAW_TUNER) {
+		if (mode < DEVICE_MODE_DVBT || mode >= DEVICE_MODE_RAW_TUNER) {
 			sms_err("invalid mode specified %d", mode);
 			return -EINVAL;
 		}
diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c
index 3ee1c3902c5..266033ae278 100644
--- a/drivers/media/dvb/siano/smsdvb.c
+++ b/drivers/media/dvb/siano/smsdvb.c
@@ -325,6 +325,16 @@ static int smsdvb_sendrequest_and_wait(struct smsdvb_client_t *client,
 						0 : -ETIME;
 }
 
+static inline int led_feedback(struct smsdvb_client_t *client)
+{
+	if (client->fe_status & FE_HAS_LOCK)
+		return sms_board_led_feedback(client->coredev,
+			(client->sms_stat_dvb.ReceptionData.BER
+			== 0) ? SMS_LED_HI : SMS_LED_LO);
+	else
+		return sms_board_led_feedback(client->coredev, SMS_LED_OFF);
+}
+
 static int smsdvb_read_status(struct dvb_frontend *fe, fe_status_t *stat)
 {
 	struct smsdvb_client_t *client;
@@ -332,6 +342,8 @@ static int smsdvb_read_status(struct dvb_frontend *fe, fe_status_t *stat)
 
 	*stat = client->fe_status;
 
+	led_feedback(client);
+
 	return 0;
 }
 
@@ -342,6 +354,8 @@ static int smsdvb_read_ber(struct dvb_frontend *fe, u32 *ber)
 
 	*ber = client->sms_stat_dvb.ReceptionData.BER;
 
+	led_feedback(client);
+
 	return 0;
 }
 
@@ -359,6 +373,8 @@ static int smsdvb_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
 				(client->sms_stat_dvb.ReceptionData.InBandPwr
 				+ 95) * 3 / 2;
 
+	led_feedback(client);
+
 	return 0;
 }
 
@@ -369,6 +385,8 @@ static int smsdvb_read_snr(struct dvb_frontend *fe, u16 *snr)
 
 	*snr = client->sms_stat_dvb.ReceptionData.SNR;
 
+	led_feedback(client);
+
 	return 0;
 }
 
@@ -379,6 +397,8 @@ static int smsdvb_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
 
 	*ucblocks = client->sms_stat_dvb.ReceptionData.ErrorTSPackets;
 
+	led_feedback(client);
+
 	return 0;
 }
 
@@ -404,6 +424,8 @@ static int smsdvb_set_frontend(struct dvb_frontend *fe,
 		u32		Data[3];
 	} Msg;
 
+	int ret;
+
 	client->fe_status = FE_HAS_SIGNAL;
 	client->event_fe_state = -1;
 	client->event_unc_state = -1;
@@ -426,6 +448,23 @@ static int smsdvb_set_frontend(struct dvb_frontend *fe,
 	case BANDWIDTH_AUTO: return -EOPNOTSUPP;
 	default: return -EINVAL;
 	}
+	/* Disable LNA, if any. An error is returned if no LNA is present */
+	ret = sms_board_lna_control(client->coredev, 0);
+	if (ret == 0) {
+		fe_status_t status;
+
+		/* tune with LNA off at first */
+		ret = smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
+						  &client->tune_done);
+
+		smsdvb_read_status(fe, &status);
+
+		if (status & FE_HAS_LOCK)
+			return ret;
+
+		/* previous tune didnt lock - enable LNA and tune again */
+		sms_board_lna_control(client->coredev, 1);
+	}
 
 	return smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
 					   &client->tune_done);
@@ -451,6 +490,8 @@ static int smsdvb_init(struct dvb_frontend *fe)
 	struct smsdvb_client_t *client =
 		container_of(fe, struct smsdvb_client_t, frontend);
 
+	sms_board_power(client->coredev, 1);
+
 	sms_board_dvb3_event(client, DVB3_EVENT_INIT);
 	return 0;
 }
@@ -460,6 +501,9 @@ static int smsdvb_sleep(struct dvb_frontend *fe)
 	struct smsdvb_client_t *client =
 		container_of(fe, struct smsdvb_client_t, frontend);
 
+	sms_board_led_feedback(client->coredev, SMS_LED_OFF);
+	sms_board_power(client->coredev, 0);
+
 	sms_board_dvb3_event(client, DVB3_EVENT_SLEEP);
 
 	return 0;
diff --git a/drivers/media/dvb/siano/smssdio.c b/drivers/media/dvb/siano/smssdio.c
index dfaa49a53f3..d1d652e7f89 100644
--- a/drivers/media/dvb/siano/smssdio.c
+++ b/drivers/media/dvb/siano/smssdio.c
@@ -46,6 +46,7 @@
 
 #define SMSSDIO_DATA		0x00
 #define SMSSDIO_INT		0x04
+#define SMSSDIO_BLOCK_SIZE	128
 
 static const struct sdio_device_id smssdio_ids[] = {
 	{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR),
@@ -85,7 +86,8 @@ static int smssdio_sendrequest(void *context, void *buffer, size_t size)
 	sdio_claim_host(smsdev->func);
 
 	while (size >= smsdev->func->cur_blksize) {
-		ret = sdio_write_blocks(smsdev->func, SMSSDIO_DATA, buffer, 1);
+		ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
+					buffer, smsdev->func->cur_blksize);
 		if (ret)
 			goto out;
 
@@ -94,8 +96,8 @@ static int smssdio_sendrequest(void *context, void *buffer, size_t size)
 	}
 
 	if (size) {
-		ret = sdio_write_bytes(smsdev->func, SMSSDIO_DATA,
-				       buffer, size);
+		ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
+					buffer, size);
 	}
 
 out:
@@ -125,23 +127,23 @@ static void smssdio_interrupt(struct sdio_func *func)
 	 */
 	isr = sdio_readb(func, SMSSDIO_INT, &ret);
 	if (ret) {
-		dev_err(&smsdev->func->dev,
-			"Unable to read interrupt register!\n");
+		sms_err("Unable to read interrupt register!\n");
 		return;
 	}
 
 	if (smsdev->split_cb == NULL) {
 		cb = smscore_getbuffer(smsdev->coredev);
 		if (!cb) {
-			dev_err(&smsdev->func->dev,
-				"Unable to allocate data buffer!\n");
+			sms_err("Unable to allocate data buffer!\n");
 			return;
 		}
 
-		ret = sdio_read_blocks(smsdev->func, cb->p, SMSSDIO_DATA, 1);
+		ret = sdio_memcpy_fromio(smsdev->func,
+					 cb->p,
+					 SMSSDIO_DATA,
+					 SMSSDIO_BLOCK_SIZE);
 		if (ret) {
-			dev_err(&smsdev->func->dev,
-				"Error %d reading initial block!\n", ret);
+			sms_err("Error %d reading initial block!\n", ret);
 			return;
 		}
 
@@ -152,7 +154,10 @@ static void smssdio_interrupt(struct sdio_func *func)
 			return;
 		}
 
-		size = hdr->msgLength - smsdev->func->cur_blksize;
+		if (hdr->msgLength > smsdev->func->cur_blksize)
+			size = hdr->msgLength - smsdev->func->cur_blksize;
+		else
+			size = 0;
 	} else {
 		cb = smsdev->split_cb;
 		hdr = cb->p;
@@ -162,23 +167,24 @@ static void smssdio_interrupt(struct sdio_func *func)
 		smsdev->split_cb = NULL;
 	}
 
-	if (hdr->msgLength > smsdev->func->cur_blksize) {
+	if (size) {
 		void *buffer;
 
-		size = ALIGN(size, 128);
-		buffer = cb->p + hdr->msgLength;
+		buffer = cb->p + (hdr->msgLength - size);
+		size = ALIGN(size, SMSSDIO_BLOCK_SIZE);
 
-		BUG_ON(smsdev->func->cur_blksize != 128);
+		BUG_ON(smsdev->func->cur_blksize != SMSSDIO_BLOCK_SIZE);
 
 		/*
 		 * First attempt to transfer all of it in one go...
 		 */
-		ret = sdio_read_blocks(smsdev->func, buffer,
-				       SMSSDIO_DATA, size / 128);
+		ret = sdio_memcpy_fromio(smsdev->func,
+					 buffer,
+					 SMSSDIO_DATA,
+					 size);
 		if (ret && ret != -EINVAL) {
 			smscore_putbuffer(smsdev->coredev, cb);
-			dev_err(&smsdev->func->dev,
-				"Error %d reading data from card!\n", ret);
+			sms_err("Error %d reading data from card!\n", ret);
 			return;
 		}
 
@@ -191,12 +197,12 @@ static void smssdio_interrupt(struct sdio_func *func)
 		 */
 		if (ret == -EINVAL) {
 			while (size) {
-				ret = sdio_read_blocks(smsdev->func,
-						       buffer, SMSSDIO_DATA, 1);
+				ret = sdio_memcpy_fromio(smsdev->func,
+						  buffer, SMSSDIO_DATA,
+						  smsdev->func->cur_blksize);
 				if (ret) {
 					smscore_putbuffer(smsdev->coredev, cb);
-					dev_err(&smsdev->func->dev,
-						"Error %d reading "
+					sms_err("Error %d reading "
 						"data from card!\n", ret);
 					return;
 				}
@@ -269,7 +275,7 @@ static int smssdio_probe(struct sdio_func *func,
 	if (ret)
 		goto release;
 
-	ret = sdio_set_block_size(func, 128);
+	ret = sdio_set_block_size(func, SMSSDIO_BLOCK_SIZE);
 	if (ret)
 		goto disable;
 
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 68eb4493f99..d8d4214fd65 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -1,5 +1,6 @@
 config TTPCI_EEPROM
 	tristate
+	depends on I2C
 	default n
 
 config DVB_AV7110
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index d1d959ed37b..8d65c652ba5 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -36,7 +36,6 @@
 #include <linux/fs.h>
 #include <linux/timer.h>
 #include <linux/poll.h>
-#include <linux/smp_lock.h>
 
 #include <linux/kernel.h>
 #include <linux/sched.h>
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index 837467f9380..575bf9d8941 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -58,6 +58,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/input.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index 640421ceb24..e85f318b4d2 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -127,6 +127,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/hid.h>
@@ -1200,7 +1201,7 @@ static int si470x_fops_release(struct file *file)
 			video_unregister_device(radio->videodev);
 			kfree(radio->buffer);
 			kfree(radio);
-			goto done;
+			goto unlock;
 		}
 
 		/* stop rds reception */
@@ -1213,9 +1214,8 @@ static int si470x_fops_release(struct file *file)
 		retval = si470x_stop(radio);
 		usb_autopm_put_interface(radio->intf);
 	}
-
+unlock:
 	mutex_unlock(&radio->disconnect_lock);
-
 done:
 	return retval;
 }
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 061e147f6f2..dcf9fa9264b 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -312,6 +312,14 @@ config VIDEO_OV7670
 	  OV7670 VGA camera.  It currently only works with the M88ALP01
 	  controller.
 
+config VIDEO_MT9V011
+	tristate "Micron mt9v011 sensor support"
+	depends on I2C && VIDEO_V4L2
+	---help---
+	  This is a Video4Linux2 sensor-level driver for the Micron
+	  mt0v011 1.3 Mpixel camera.  It currently only works with the
+	  em28xx driver.
+
 config VIDEO_TCM825X
 	tristate "TCM825x camera sensor support"
 	depends on I2C && VIDEO_V4L2
@@ -912,6 +920,8 @@ source "drivers/media/video/pwc/Kconfig"
 config USB_ZR364XX
 	tristate "USB ZR364XX Camera support"
 	depends on VIDEO_V4L2
+	select VIDEOBUF_GEN
+	select VIDEOBUF_VMALLOC
 	---help---
 	  Say Y here if you want to connect this type of camera to your
 	  computer's USB port.
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 7fb3add1b38..9f2e3214a48 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
 obj-$(CONFIG_VIDEO_OV7670) 	+= ov7670.o
 obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
 obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
+obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o
 
 obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
 obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index fdb4adff3d2..ca6558c394b 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -3324,8 +3324,6 @@ void __devinit bttv_init_card1(struct bttv *btv)
 /* initialization part two -- after registering i2c bus */
 void __devinit bttv_init_card2(struct bttv *btv)
 {
-	int addr=ADDR_UNSET;
-
 	btv->tuner_type = UNSET;
 
 	if (BTTV_BOARD_UNKNOWN == btv->c.type) {
@@ -3470,9 +3468,6 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	btv->pll.pll_current = -1;
 
 	/* tuner configuration (from card list / autodetect / insmod option) */
-	if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
-		addr = bttv_tvcards[btv->c.type].tuner_addr;
-
 	if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
 		if (UNSET == btv->tuner_type)
 			btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
@@ -3496,40 +3491,6 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	if (UNSET == btv->tuner_type)
 		btv->tuner_type = TUNER_ABSENT;
 
-	if (btv->tuner_type != TUNER_ABSENT) {
-		struct tuner_setup tun_setup;
-
-		/* Load tuner module before issuing tuner config call! */
-		if (bttv_tvcards[btv->c.type].has_radio)
-			v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_RADIO));
-		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
-		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
-
-		tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
-		tun_setup.type = btv->tuner_type;
-		tun_setup.addr = addr;
-
-		if (bttv_tvcards[btv->c.type].has_radio)
-			tun_setup.mode_mask |= T_RADIO;
-
-		bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
-	}
-
-	if (btv->tda9887_conf) {
-		struct v4l2_priv_tun_config tda9887_cfg;
-
-		tda9887_cfg.tuner = TUNER_TDA9887;
-		tda9887_cfg.priv = &btv->tda9887_conf;
-
-		bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
-	}
-
 	btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
 		   bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
 	btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
@@ -3540,15 +3501,15 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		btv->has_remote = remote[btv->c.nr];
 
 	if (bttv_tvcards[btv->c.type].has_radio)
-		btv->has_radio=1;
+		btv->has_radio = 1;
 	if (bttv_tvcards[btv->c.type].has_remote)
-		btv->has_remote=1;
+		btv->has_remote = 1;
 	if (!bttv_tvcards[btv->c.type].no_gpioirq)
-		btv->gpioirq=1;
+		btv->gpioirq = 1;
 	if (bttv_tvcards[btv->c.type].volume_gpio)
-		btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
+		btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
 	if (bttv_tvcards[btv->c.type].audio_mode_gpio)
-		btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
+		btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
 
 	if (btv->tuner_type == TUNER_ABSENT)
 		return;  /* no tuner or related drivers to load */
@@ -3666,6 +3627,49 @@ no_audio:
 }
 
 
+/* initialize the tuner */
+void __devinit bttv_init_tuner(struct bttv *btv)
+{
+	int addr = ADDR_UNSET;
+
+	if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
+		addr = bttv_tvcards[btv->c.type].tuner_addr;
+
+	if (btv->tuner_type != TUNER_ABSENT) {
+		struct tuner_setup tun_setup;
+
+		/* Load tuner module before issuing tuner config call! */
+		if (bttv_tvcards[btv->c.type].has_radio)
+			v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tuner", "tuner",
+				v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tuner", "tuner",
+				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tuner", "tuner",
+				v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
+
+		tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
+		tun_setup.type = btv->tuner_type;
+		tun_setup.addr = addr;
+
+		if (bttv_tvcards[btv->c.type].has_radio)
+			tun_setup.mode_mask |= T_RADIO;
+
+		bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
+	}
+
+	if (btv->tda9887_conf) {
+		struct v4l2_priv_tun_config tda9887_cfg;
+
+		tda9887_cfg.tuner = TUNER_TDA9887;
+		tda9887_cfg.priv = &btv->tda9887_conf;
+
+		bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
+	}
+}
+
 /* ----------------------------------------------------------------------- */
 
 static void modtec_eeprom(struct bttv *btv)
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 5eb1464af67..8cc6dd28d6a 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -41,6 +41,7 @@
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/kdev_t.h>
 #include "bttvp.h"
@@ -4418,6 +4419,7 @@ static int __devinit bttv_probe(struct pci_dev *dev,
 
 	/* some card-specific stuff (needs working i2c) */
 	bttv_init_card2(btv);
+	bttv_init_tuner(btv);
 	init_irqreg(btv);
 
 	/* register video4linux + input */
diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h
index 3d36daf206f..3ec2402c6b4 100644
--- a/drivers/media/video/bt8xx/bttv.h
+++ b/drivers/media/video/bt8xx/bttv.h
@@ -283,6 +283,7 @@ extern struct tvcard bttv_tvcards[];
 extern void bttv_idcard(struct bttv *btv);
 extern void bttv_init_card1(struct bttv *btv);
 extern void bttv_init_card2(struct bttv *btv);
+extern void bttv_init_tuner(struct bttv *btv);
 
 /* card-specific funtions */
 extern void tea5757_set_freq(struct bttv *btv, unsigned short freq);
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index 10dbd4a11b3..9e39bc5f7b0 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -992,7 +992,7 @@ static int accept_bwqcam(struct parport *port)
 
 	if (parport[0] && strncmp(parport[0], "auto", 4) != 0) {
 		/* user gave parport parameters */
-		for(n=0; parport[n] && n<MAX_CAMS; n++){
+		for (n = 0; n < MAX_CAMS && parport[n]; n++) {
 			char *ep;
 			unsigned long r;
 			r = simple_strtoul(parport[n], &ep, 0);
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index c92a25036f0..36f2d76006f 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -198,11 +198,14 @@ static const struct cx18_card_pci_info cx18_pci_mpc718[] = {
 
 static const struct cx18_card cx18_card_mpc718 = {
 	.type = CX18_CARD_YUAN_MPC718,
-	.name = "Yuan MPC718",
-	.comment = "Analog video capture works; some audio line in may not.\n",
+	.name = "Yuan MPC718 MiniPCI DVB-T/Analog",
+	.comment = "Experimenters needed for device to work well.\n"
+		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
 	.v4l2_capabilities = CX18_CAP_ENCODER,
 	.hw_audio_ctrl = CX18_HW_418_AV,
-	.hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL,
+	.hw_muxer = CX18_HW_GPIO_MUX,
+	.hw_all = CX18_HW_418_AV | CX18_HW_TUNER |
+		  CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
 	.video_inputs = {
 		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
 		{ CX18_CARD_INPUT_SVIDEO1,    1,
@@ -211,27 +214,34 @@ static const struct cx18_card cx18_card_mpc718 = {
 		{ CX18_CARD_INPUT_SVIDEO2,    2,
 				CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
 		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
-		{ CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 },
 	},
 	.audio_inputs = {
 		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
-		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 0 },
-		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL1, 0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL2, 1 },
 	},
-	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 0 },
 	.tuners = {
 		/* XC3028 tuner */
 		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
 	},
+	/* FIXME - the FM radio is just a guess and driver doesn't use SIF */
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
 	.ddr = {
-		/* Probably Samsung K4D263238G-VC33 memory */
-		.chip_config = 0x003,
-		.refresh = 0x30c,
-		.timing1 = 0x23230b73,
-		.timing2 = 0x08,
+		/* Hynix HY5DU283222B DDR RAM */
+		.chip_config = 0x303,
+		.refresh = 0x3bd,
+		.timing1 = 0x36320966,
+		.timing2 = 0x1f,
 		.tune_lane = 0,
 		.initial_emrs = 2,
 	},
+	.gpio_init.initial_value = 0x1,
+	.gpio_init.direction = 0x3,
+	/* FIXME - these GPIO's are just guesses */
+	.gpio_audio_input = { .mask   = 0x3,
+			      .tuner  = 0x1,
+			      .linein = 0x3,
+			      .radio  = 0x1 },
 	.xceive_pin = 0,
 	.pci_list = cx18_pci_mpc718,
 	.i2c = &cx18_i2c_std,
diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c
index 5136df19833..93f0dae0135 100644
--- a/drivers/media/video/cx18/cx18-controls.c
+++ b/drivers/media/video/cx18/cx18-controls.c
@@ -20,6 +20,7 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
  *  02111-1307  USA
  */
+#include <linux/kernel.h>
 
 #include "cx18-driver.h"
 #include "cx18-cards.h"
@@ -317,7 +318,7 @@ int cx18_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
 		idx = p.audio_properties & 0x03;
 		/* The audio clock of the digitizer must match the codec sample
 		   rate otherwise you get some very strange effects. */
-		if (idx < sizeof(freqs))
+		if (idx < ARRAY_SIZE(freqs))
 			cx18_call_all(cx, audio, s_clock_freq, freqs[idx]);
 		return err;
 	}
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 6ea3fe623ef..51a0c33b25b 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -30,6 +30,10 @@
 #include "s5h1409.h"
 #include "mxl5005s.h"
 #include "zl10353.h"
+
+#include <linux/firmware.h>
+#include "mt352.h"
+#include "mt352_priv.h"
 #include "tuner-xc2028.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
@@ -38,6 +42,11 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 #define CX18_CLOCK_ENABLE2		 0xc71024
 #define CX18_DMUX_CLK_MASK		 0x0080
 
+/*
+ * CX18_CARD_HVR_1600_ESMT
+ * CX18_CARD_HVR_1600_SAMSUNG
+ */
+
 static struct mxl5005s_config hauppauge_hvr1600_tuner = {
 	.i2c_address     = 0xC6 >> 1,
 	.if_freq         = IF_FREQ_5380000HZ,
@@ -65,6 +74,9 @@ static struct s5h1409_config hauppauge_hvr1600_config = {
 	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
 };
 
+/*
+ * CX18_CARD_LEADTEK_DVR3100H
+ */
 /* Information/confirmation of proper config values provided by Terry Wu */
 static struct zl10353_config leadtek_dvr3100h_demod = {
 	.demod_address         = 0x1e >> 1, /* Datasheet suggested straps */
@@ -74,6 +86,121 @@ static struct zl10353_config leadtek_dvr3100h_demod = {
 	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
 };
 
+/*
+ * CX18_CARD_YUAN_MPC718
+ */
+/*
+ * Due to
+ *
+ * 1. an absence of information on how to prgram the MT352
+ * 2. the Linux mt352 module pushing MT352 initialzation off onto us here
+ *
+ * We have to use an init sequence that *you* must extract from the Windows
+ * driver (yuanrap.sys) and which we load as a firmware.
+ *
+ * If someone can provide me with a Zarlink MT352 (Intel CE6352?) Design Manual
+ * with chip programming details, then I can remove this annoyance.
+ */
+static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream,
+				   const struct firmware **fw)
+{
+	struct cx18 *cx = stream->cx;
+	const char *fn = "dvb-cx18-mpc718-mt352.fw";
+	int ret;
+
+	ret = request_firmware(fw, fn, &cx->pci_dev->dev);
+	if (ret)
+		CX18_ERR("Unable to open firmware file %s\n", fn);
+	else {
+		size_t sz = (*fw)->size;
+		if (sz < 2 || sz > 64 || (sz % 2) != 0) {
+			CX18_ERR("Firmware %s has a bad size: %lu bytes\n",
+				 fn, (unsigned long) sz);
+			ret = -EILSEQ;
+			release_firmware(*fw);
+			*fw = NULL;
+		}
+	}
+
+	if (ret) {
+		CX18_ERR("The MPC718 board variant with the MT352 DVB-T"
+			  "demodualtor will not work without it\n");
+		CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware "
+			  "mpc718' if you need the firmware\n");
+	}
+	return ret;
+}
+
+static int yuan_mpc718_mt352_init(struct dvb_frontend *fe)
+{
+	struct cx18_dvb *dvb = container_of(fe->dvb,
+					    struct cx18_dvb, dvb_adapter);
+	struct cx18_stream *stream = container_of(dvb, struct cx18_stream, dvb);
+	const struct firmware *fw = NULL;
+	int ret;
+	int i;
+	u8 buf[3];
+
+	ret = yuan_mpc718_mt352_reqfw(stream, &fw);
+	if (ret)
+		return ret;
+
+	/* Loop through all the register-value pairs in the firmware file */
+	for (i = 0; i < fw->size; i += 2) {
+		buf[0] = fw->data[i];
+		/* Intercept a few registers we want to set ourselves */
+		switch (buf[0]) {
+		case TRL_NOMINAL_RATE_0:
+			/* Set our custom OFDM bandwidth in the case below */
+			break;
+		case TRL_NOMINAL_RATE_1:
+			/* 6 MHz: 64/7 * 6/8 / 20.48 * 2^16 = 0x55b6.db6 */
+			/* 7 MHz: 64/7 * 7/8 / 20.48 * 2^16 = 0x6400 */
+			/* 8 MHz: 64/7 * 8/8 / 20.48 * 2^16 = 0x7249.249 */
+			buf[1] = 0x72;
+			buf[2] = 0x49;
+			mt352_write(fe, buf, 3);
+			break;
+		case INPUT_FREQ_0:
+			/* Set our custom IF in the case below */
+			break;
+		case INPUT_FREQ_1:
+			/* 4.56 MHz IF: (20.48 - 4.56)/20.48 * 2^14 = 0x31c0 */
+			buf[1] = 0x31;
+			buf[2] = 0xc0;
+			mt352_write(fe, buf, 3);
+			break;
+		default:
+			/* Pass through the register-value pair from the fw */
+			buf[1] = fw->data[i+1];
+			mt352_write(fe, buf, 2);
+			break;
+		}
+	}
+
+	buf[0] = (u8) TUNER_GO;
+	buf[1] = 0x01; /* Go */
+	mt352_write(fe, buf, 2);
+	release_firmware(fw);
+	return 0;
+}
+
+static struct mt352_config yuan_mpc718_mt352_demod = {
+	.demod_address = 0x1e >> 1,
+	.adc_clock     = 20480,     /* 20.480 MHz */
+	.if2           =  4560,     /*  4.560 MHz */
+	.no_tuner      = 1,         /* XC3028 is not behind the gate */
+	.demod_init    = yuan_mpc718_mt352_init,
+};
+
+static struct zl10353_config yuan_mpc718_zl10353_demod = {
+	.demod_address         = 0x1e >> 1, /* Datasheet suggested straps */
+	.if2                   = 45600,     /* 4.560 MHz IF from the XC3028 */
+	.parallel_ts           = 1,         /* Not a serial TS */
+	.no_tuner              = 1,         /* XC3028 is not behind the gate */
+	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
+};
+
 static int dvb_register(struct cx18_stream *stream);
 
 /* Kernel DVB framework calls this when the feed needs to start.
@@ -113,6 +240,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
 		break;
 
 	case CX18_CARD_LEADTEK_DVR3100H:
+	case CX18_CARD_YUAN_MPC718:
 	default:
 		/* Assumption - Parallel transport - Signalling
 		 * undefined or default.
@@ -326,6 +454,38 @@ static int dvb_register(struct cx18_stream *stream)
 				fe->ops.tuner_ops.set_config(fe, &ctrl);
 		}
 		break;
+	case CX18_CARD_YUAN_MPC718:
+		/*
+		 * TODO
+		 * Apparently, these cards also could instead have a
+		 * DiBcom demod supported by one of the db7000 drivers
+		 */
+		dvb->fe = dvb_attach(mt352_attach,
+				     &yuan_mpc718_mt352_demod,
+				     &cx->i2c_adap[1]);
+		if (dvb->fe == NULL)
+			dvb->fe = dvb_attach(zl10353_attach,
+					     &yuan_mpc718_zl10353_demod,
+					     &cx->i2c_adap[1]);
+		if (dvb->fe != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap = &cx->i2c_adap[1],
+				.i2c_addr = 0xc2 >> 1,
+				.ctrl = NULL,
+			};
+			static struct xc2028_ctrl ctrl = {
+				.fname   = XC2028_DEFAULT_FIRMWARE,
+				.max_len = 64,
+				.demod   = XC3028_FE_ZARLINK456,
+				.type    = XC2028_AUTO,
+			};
+
+			fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctrl);
+		}
+		break;
 	default:
 		/* No Digital Tv Support */
 		break;
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 2943bfd32a9..1a1048b18f7 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -31,6 +31,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
+#include <linux/smp_lock.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/cx2341x.h>
@@ -57,7 +58,8 @@ MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages");
 
 #define dprintk(level, fmt, arg...)\
 	do { if (v4l_debug >= level) \
-		printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg);\
+		printk(KERN_DEBUG "%s: " fmt, \
+		(dev) ? dev->name : "cx23885[?]", ## arg); \
 	} while (0)
 
 static struct cx23885_tvnorm cx23885_tvnorms[] = {
@@ -1676,6 +1678,7 @@ static struct v4l2_file_operations mpeg_fops = {
 	.read	       = mpeg_read,
 	.poll          = mpeg_poll,
 	.mmap	       = mpeg_mmap,
+	.ioctl	       = video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
@@ -1712,6 +1715,8 @@ static struct video_device cx23885_mpeg_template = {
 	.fops          = &mpeg_fops,
 	.ioctl_ops     = &mpeg_ioctl_ops,
 	.minor         = -1,
+	.tvnorms       = CX23885_NORMS,
+	.current_norm  = V4L2_STD_NTSC_M,
 };
 
 void cx23885_417_unregister(struct cx23885_dev *dev)
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 48a975134ac..86ac529e62b 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -463,6 +463,30 @@ static struct xc5000_config mygica_x8506_xc5000_config = {
 	.if_khz = 5380,
 };
 
+static int cx23885_dvb_set_frontend(struct dvb_frontend *fe,
+				    struct dvb_frontend_parameters *param)
+{
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+		switch (param->u.vsb.modulation) {
+		case VSB_8:
+			cx23885_gpio_clear(dev, GPIO_5);
+			break;
+		case QAM_64:
+		case QAM_256:
+		default:
+			cx23885_gpio_set(dev, GPIO_5);
+			break;
+		}
+		break;
+	}
+	return (port->set_frontend_save) ?
+		port->set_frontend_save(fe, param) : -ENODEV;
+}
+
 static int dvb_register(struct cx23885_tsport *port)
 {
 	struct cx23885_dev *dev = port->dev;
@@ -502,6 +526,12 @@ static int dvb_register(struct cx23885_tsport *port)
 				   0x60, &dev->i2c_bus[1].i2c_adap,
 				   &hauppauge_hvr127x_config);
 		}
+
+		/* FIXME: temporary hack */
+		/* define bridge override to set_frontend */
+		port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend;
+		fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend;
+
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 		i2c_bus = &dev->i2c_bus[0];
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 70836af3ab4..5d609333630 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -26,6 +26,7 @@
 #include <linux/kmod.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 1a2ac518a3f..214a55e943b 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -288,6 +288,10 @@ struct cx23885_tsport {
 	/* Allow a single tsport to have multiple frontends */
 	u32                        num_frontends;
 	void                       *port_priv;
+
+	/* FIXME: temporary hack */
+	int (*set_frontend_save) (struct dvb_frontend *,
+				  struct dvb_frontend_parameters *);
 };
 
 struct cx23885_dev {
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 44eacfb0d0d..356d6896da3 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -32,6 +32,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
+#include <linux/smp_lock.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/cx2341x.h>
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index a5cc1c1fc2d..39465301ec9 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -3003,6 +3003,14 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl)
 	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
 		ctl->demod = XC3028_FE_OREN538;
 		break;
+	case CX88_BOARD_GENIATECH_X8000_MT:
+		/* FIXME: For this board, the xc3028 never recovers after being
+		   powered down (the reset GPIO probably is not set properly).
+		   We don't have access to the hardware so we cannot determine
+		   which GPIO is used for xc3028, so just disable power xc3028
+		   power management for now */
+		ctl->disable_power_mgmt = 1;
+		break;
 	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 	case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
 	case CX88_BOARD_PROLINK_PV_8000GT:
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index c44e8760021..e237b507659 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -501,6 +501,7 @@ static struct zl10353_config cx88_pinnacle_hybrid_pctv = {
 static struct zl10353_config cx88_geniatech_x8000_mt = {
        .demod_address = (0x1e >> 1),
        .no_tuner = 1,
+       .disable_i2c_gate_ctrl = 1,
 };
 
 static struct s5h1411_config dvico_fusionhdtv7_config = {
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index da4e3912cd3..7172dcf2a4f 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -116,6 +116,10 @@ static int cx8802_start_dma(struct cx8802_dev    *dev,
 			udelay(100);
 			break;
 		case CX88_BOARD_HAUPPAUGE_HVR1300:
+			/* Enable MPEG parallel IO and video signal pins */
+			cx_write(MO_PINMUX_IO, 0x88);
+			cx_write(TS_SOP_STAT, 0);
+			cx_write(TS_VALERR_CNTRL, 0);
 			break;
 		case CX88_BOARD_PINNACLE_PCTV_HD_800i:
 			/* Enable MPEG parallel IO and video signal pins */
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index b12770848c0..2bb54c3ef5c 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -31,6 +31,7 @@
 #include <linux/kmod.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index ec2f45dde16..0664d111085 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -32,6 +32,7 @@
 #include <linux/list.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <asm/uaccess.h>
 #include <asm/atomic.h>
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 16a5af30e9d..6524b493e03 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -8,6 +8,8 @@ config VIDEO_EM28XX
 	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO
+
 	---help---
 	  This is a video4linux driver for Empia 28xx based TV cards.
 
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index c43fdb9bc88..1c2e544eda7 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -157,6 +157,20 @@ static struct em28xx_reg_seq evga_indtube_digital[] = {
 	{ -1,			-1,	-1,		-1},
 };
 
+/* Pinnacle Hybrid Pro eb1a:2881 */
+static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
+	{EM28XX_R08_GPIO,	0xfd,   ~EM_GPIO_4,	10},
+	{	-1,		-1,	-1,		-1},
+};
+
+static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
+	{EM28XX_R08_GPIO,	0x6e,	~EM_GPIO_4,	10},
+	{EM2880_R04_GPO,	0x04,	0xff,	       100},/* zl10353 reset */
+	{EM2880_R04_GPO,	0x0c,	0xff,		 1},
+	{	-1,		-1,	-1,		-1},
+};
+
+
 /* Callback for the most boards */
 static struct em28xx_reg_seq default_tuner_gpio[] = {
 	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
@@ -191,18 +205,27 @@ static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
 	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
 	{	-1,		-1,	-1,		-1},
 };
+
+static struct em28xx_reg_seq silvercrest_reg_seq[] = {
+	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
+	{EM28XX_R08_GPIO,	0x01,	0xf7,		10},
+	{	-1,		-1,	-1,		-1},
+};
+
 /*
  *  Board definitions
  */
 struct em28xx_board em28xx_boards[] = {
 	[EM2750_BOARD_UNKNOWN] = {
-		.name          = "Unknown EM2750/EM2751 webcam grabber",
-		.xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
-		.tuner_type    = TUNER_ABSENT,	/* This is a webcam */
+		.name          = "EM2710/EM2750/EM2751 webcam grabber",
+		.xclk          = EM28XX_XCLK_FREQUENCY_20MHZ,
+		.tuner_type    = TUNER_ABSENT,
+		.is_webcam     = 1,
 		.input         = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = silvercrest_reg_seq,
 		} },
 	},
 	[EM2800_BOARD_UNKNOWN] = {
@@ -224,13 +247,15 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2820_BOARD_UNKNOWN] = {
 		.name          = "Unknown EM2750/28xx video grabber",
 		.tuner_type    = TUNER_ABSENT,
+		.is_webcam     = 1,	/* To enable sensor probe */
 	},
 	[EM2750_BOARD_DLCW_130] = {
 		/* Beijing Huaqi Information Digital Technology Co., Ltd */
 		.name          = "Huaqi DLCW-130",
 		.valid         = EM28XX_BOARD_NOT_VALIDATED,
 		.xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
-		.tuner_type    = TUNER_ABSENT,	/* This is a webcam */
+		.tuner_type    = TUNER_ABSENT,
+		.is_webcam     = 1,
 		.input         = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
@@ -431,11 +456,23 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
 		.name         = "Videology 20K14XUSB USB2.0",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.tuner_type   = TUNER_ABSENT,	/* This is a webcam */
+		.tuner_type   = TUNER_ABSENT,
+		.is_webcam    = 1,
+		.input        = { {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
+		} },
+	},
+	[EM2820_BOARD_SILVERCREST_WEBCAM] = {
+		.name         = "Silvercrest Webcam 1.3mpix",
+		.tuner_type   = TUNER_ABSENT,
+		.is_webcam    = 1,
 		.input        = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = silvercrest_reg_seq,
 		} },
 	},
 	[EM2821_BOARD_SUPERCOMP_USB_2] = {
@@ -479,7 +516,8 @@ struct em28xx_board em28xx_boards[] = {
 		/* Beijing Huaqi Information Digital Technology Co., Ltd */
 		.name         = "NetGMBH Cam",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.tuner_type   = TUNER_ABSENT,	/* This is a webcam */
+		.tuner_type   = TUNER_ABSENT,
+		.is_webcam    = 1,
 		.input        = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
@@ -584,22 +622,27 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2861_BOARD_PLEXTOR_PX_TV100U] = {
 		.name         = "Plextor ConvertX PX-TV100U",
-		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.tuner_type   = TUNER_TNF_5335MF,
+		.xclk         = EM28XX_XCLK_I2S_MSB_TIMING |
+				EM28XX_XCLK_FREQUENCY_12MHZ,
 		.tda9887_conf = TDA9887_PRESENT,
 		.decoder      = EM28XX_TVP5150,
+		.has_msp34xx  = 1,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = pinnacle_hybrid_pro_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = pinnacle_hybrid_pro_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
+			.gpio     = pinnacle_hybrid_pro_analog,
 		} },
 	},
 
@@ -826,7 +869,7 @@ struct em28xx_board em28xx_boards[] = {
 		.tuner_gpio     = default_tuner_gpio,
 		.decoder        = EM28XX_TVP5150,
 		.has_dvb        = 1,
-		.dvb_gpio       = default_analog,
+		.dvb_gpio       = default_digital,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
@@ -1229,25 +1272,26 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
 		.name         = "Pinnacle Hybrid Pro",
-		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.tuner_type   = TUNER_XC2028,
 		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
+		.has_dvb      = 1,
+		.dvb_gpio     = pinnacle_hybrid_pro_digital,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
-			.gpio     = default_analog,
+			.gpio     = pinnacle_hybrid_pro_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
-			.gpio     = default_analog,
+			.gpio     = pinnacle_hybrid_pro_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
-			.gpio     = default_analog,
+			.gpio     = pinnacle_hybrid_pro_analog,
 		} },
 	},
 	[EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
@@ -1505,6 +1549,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2750_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2800),
 			.driver_info = EM2800_BOARD_UNKNOWN },
+	{ USB_DEVICE(0xeb1a, 0x2710),
+			.driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2820),
 			.driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2821),
@@ -1617,6 +1663,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = {
 	{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
 	{0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
 	{0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
+	{0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
 };
 
 /* I2C devicelist hash table for devices with generic USB IDs */
@@ -1639,6 +1686,11 @@ static unsigned short tvp5150_addrs[] = {
 	I2C_CLIENT_END
 };
 
+static unsigned short mt9v011_addrs[] = {
+	0xba >> 1,
+	I2C_CLIENT_END
+};
+
 static unsigned short msp3400_addrs[] = {
 	0x80 >> 1,
 	0x88 >> 1,
@@ -1678,65 +1730,150 @@ static inline void em28xx_set_model(struct em28xx *dev)
 				       EM28XX_I2C_FREQ_100_KHZ;
 }
 
-/* Since em28xx_pre_card_setup() requires a proper dev->model,
- * this won't work for boards with generic PCI IDs
+
+/* FIXME: Should be replaced by a proper mt9m111 driver */
+static int em28xx_initialize_mt9m111(struct em28xx *dev)
+{
+	int i;
+	unsigned char regs[][3] = {
+		{ 0x0d, 0x00, 0x01, },  /* reset and use defaults */
+		{ 0x0d, 0x00, 0x00, },
+		{ 0x0a, 0x00, 0x21, },
+		{ 0x21, 0x04, 0x00, },  /* full readout speed, no row/col skipping */
+	};
+
+	for (i = 0; i < ARRAY_SIZE(regs); i++)
+		i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
+
+	return 0;
+}
+
+
+/* FIXME: Should be replaced by a proper mt9m001 driver */
+static int em28xx_initialize_mt9m001(struct em28xx *dev)
+{
+	int i;
+	unsigned char regs[][3] = {
+		{ 0x0d, 0x00, 0x01, },
+		{ 0x0d, 0x00, 0x00, },
+		{ 0x04, 0x05, 0x00, },	/* hres = 1280 */
+		{ 0x03, 0x04, 0x00, },  /* vres = 1024 */
+		{ 0x20, 0x11, 0x00, },
+		{ 0x06, 0x00, 0x10, },
+		{ 0x2b, 0x00, 0x24, },
+		{ 0x2e, 0x00, 0x24, },
+		{ 0x35, 0x00, 0x24, },
+		{ 0x2d, 0x00, 0x20, },
+		{ 0x2c, 0x00, 0x20, },
+		{ 0x09, 0x0a, 0xd4, },
+		{ 0x35, 0x00, 0x57, },
+	};
+
+	for (i = 0; i < ARRAY_SIZE(regs); i++)
+		i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
+
+	return 0;
+}
+
+/* HINT method: webcam I2C chips
+ *
+ * This method works for webcams with Micron sensors
  */
-void em28xx_pre_card_setup(struct em28xx *dev)
+static int em28xx_hint_sensor(struct em28xx *dev)
 {
 	int rc;
+	char *sensor_name;
+	unsigned char cmd;
+	__be16 version_be;
+	u16 version;
+
+	/* Micron sensor detection */
+	dev->i2c_client.addr = 0xba >> 1;
+	cmd = 0;
+	i2c_master_send(&dev->i2c_client, &cmd, 1);
+	rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
+	if (rc != 2)
+		return -EINVAL;
+
+	version = be16_to_cpu(version_be);
+	switch (version) {
+	case 0x8232:		/* mt9v011 640x480 1.3 Mpix sensor */
+	case 0x8243:		/* mt9v011 rev B 640x480 1.3 Mpix sensor */
+		dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
+		em28xx_set_model(dev);
+
+		sensor_name = "mt9v011";
+		dev->em28xx_sensor = EM28XX_MT9V011;
+		dev->sensor_xres = 640;
+		dev->sensor_yres = 480;
+		/*
+		 * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
+		 * the Silvercrest cam I have here for testing - for higher
+		 * resolutions, a high clock cause horizontal artifacts, so we
+		 * need to use a lower xclk frequency.
+		 * Yet, it would be possible to adjust xclk depending on the
+		 * desired resolution, since this affects directly the
+		 * frame rate.
+		 */
+		dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
+		dev->sensor_xtal = 4300000;
 
-	em28xx_set_model(dev);
+		/* probably means GRGB 16 bit bayer */
+		dev->vinmode = 0x0d;
+		dev->vinctl = 0x00;
 
-	em28xx_info("Identified as %s (card=%d)\n",
-		    dev->board.name, dev->model);
+		break;
 
-	/* Set the default GPO/GPIO for legacy devices */
-	dev->reg_gpo_num = EM2880_R04_GPO;
-	dev->reg_gpio_num = EM28XX_R08_GPIO;
+	case 0x143a:    /* MT9M111 as found in the ECS G200 */
+		dev->model = EM2750_BOARD_UNKNOWN;
+		em28xx_set_model(dev);
 
-	dev->wait_after_write = 5;
+		sensor_name = "mt9m111";
+		dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
+		dev->em28xx_sensor = EM28XX_MT9M111;
+		em28xx_initialize_mt9m111(dev);
+		dev->sensor_xres = 640;
+		dev->sensor_yres = 512;
 
-	/* Based on the Chip ID, set the device configuration */
-	rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
-	if (rc > 0) {
-		dev->chip_id = rc;
+		dev->vinmode = 0x0a;
+		dev->vinctl = 0x00;
 
-		switch (dev->chip_id) {
-		case CHIP_ID_EM2750:
-			em28xx_info("chip ID is em2750\n");
-			break;
-		case CHIP_ID_EM2820:
-			em28xx_info("chip ID is em2820\n");
-			break;
-		case CHIP_ID_EM2840:
-			em28xx_info("chip ID is em2840\n");
-			break;
-		case CHIP_ID_EM2860:
-			em28xx_info("chip ID is em2860\n");
-			break;
-		case CHIP_ID_EM2870:
-			em28xx_info("chip ID is em2870\n");
-			dev->wait_after_write = 0;
-			break;
-		case CHIP_ID_EM2874:
-			em28xx_info("chip ID is em2874\n");
-			dev->reg_gpio_num = EM2874_R80_GPIO;
-			dev->wait_after_write = 0;
-			break;
-		case CHIP_ID_EM2883:
-			em28xx_info("chip ID is em2882/em2883\n");
-			dev->wait_after_write = 0;
-			break;
-		default:
-			em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
-		}
+		break;
+
+	case 0x8431:
+		dev->model = EM2750_BOARD_UNKNOWN;
+		em28xx_set_model(dev);
+
+		sensor_name = "mt9m001";
+		dev->em28xx_sensor = EM28XX_MT9M001;
+		em28xx_initialize_mt9m001(dev);
+		dev->sensor_xres = 1280;
+		dev->sensor_yres = 1024;
+
+		/* probably means BGGR 16 bit bayer */
+		dev->vinmode = 0x0c;
+		dev->vinctl = 0x00;
+
+		break;
+	default:
+		printk("Unknown Micron Sensor 0x%04x\n", version);
+		return -EINVAL;
 	}
 
-	/* Prepopulate cached GPO register content */
-	rc = em28xx_read_reg(dev, dev->reg_gpo_num);
-	if (rc >= 0)
-		dev->reg_gpo = rc;
+	/* Setup webcam defaults */
+	em28xx_pre_card_setup(dev);
+
+	em28xx_errdev("Sensor is %s, using model %s entry.\n",
+		      sensor_name, em28xx_boards[dev->model].name);
+
+	return 0;
+}
 
+/* Since em28xx_pre_card_setup() requires a proper dev->model,
+ * this won't work for boards with generic PCI IDs
+ */
+void em28xx_pre_card_setup(struct em28xx *dev)
+{
 	/* Set the initial XCLK and I2C clock values based on the board
 	   definition */
 	em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
@@ -1746,9 +1883,8 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 	/* request some modules */
 	switch (dev->model) {
 	case EM2861_BOARD_PLEXTOR_PX_TV100U:
-		/* FIXME guess */
-		/* Turn on analog audio output */
-		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+		/* Sets the msp34xx I2S speed */
+		dev->i2s_speed = 2048000;
 		break;
 	case EM2861_BOARD_KWORLD_PVRTV_300U:
 	case EM2880_BOARD_KWORLD_DVB_305U:
@@ -1860,6 +1996,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 		ctl->demod = XC3028_FE_ZARLINK456;
 		break;
 	case EM2880_BOARD_TERRATEC_HYBRID_XS:
+	case EM2881_BOARD_PINNACLE_HYBRID_PRO:
 		ctl->demod = XC3028_FE_ZARLINK456;
 		break;
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
@@ -2085,7 +2222,20 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
 
 void em28xx_card_setup(struct em28xx *dev)
 {
-	em28xx_set_model(dev);
+	/*
+	 * If the device can be a webcam, seek for a sensor.
+	 * If sensor is not found, then it isn't a webcam.
+	 */
+	if (dev->board.is_webcam) {
+		if (em28xx_hint_sensor(dev) < 0)
+			dev->board.is_webcam = 0;
+		else
+			dev->progressive = 1;
+	} else
+		em28xx_set_model(dev);
+
+	em28xx_info("Identified as %s (card=%d)\n",
+		    dev->board.name, dev->model);
 
 	dev->tuner_type = em28xx_boards[dev->model].tuner_type;
 	if (em28xx_boards[dev->model].tuner_addr)
@@ -2156,6 +2306,7 @@ void em28xx_card_setup(struct em28xx *dev)
 		   em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
 		   so make the call now so the analog GPIOs are set properly
 		   before probing the i2c bus. */
+		em28xx_gpio_set(dev, dev->board.tuner_gpio);
 		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
 		break;
 	}
@@ -2189,6 +2340,15 @@ void em28xx_card_setup(struct em28xx *dev)
 		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 			"tvp5150", "tvp5150", tvp5150_addrs);
 
+	if (dev->em28xx_sensor == EM28XX_MT9V011) {
+		struct v4l2_subdev *sd;
+
+		sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+			 &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs);
+		v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
+	}
+
+
 	if (dev->board.adecoder == EM28XX_TVAUDIO)
 		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 			"tvaudio", "tvaudio", dev->board.tvaudio_addr);
@@ -2222,7 +2382,9 @@ void em28xx_card_setup(struct em28xx *dev)
 	}
 
 	em28xx_tuner_setup(dev);
-	em28xx_ir_init(dev);
+
+	if(!disable_ir)
+		em28xx_ir_init(dev);
 }
 
 
@@ -2288,7 +2450,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 			   int minor)
 {
 	struct em28xx *dev = *devhandle;
-	int retval = -ENOMEM;
+	int retval;
 	int errCode;
 
 	dev->udev = udev;
@@ -2305,6 +2467,58 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	dev->em28xx_read_reg_req = em28xx_read_reg_req;
 	dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
 
+	em28xx_set_model(dev);
+
+	/* Set the default GPO/GPIO for legacy devices */
+	dev->reg_gpo_num = EM2880_R04_GPO;
+	dev->reg_gpio_num = EM28XX_R08_GPIO;
+
+	dev->wait_after_write = 5;
+
+	/* Based on the Chip ID, set the device configuration */
+	retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
+	if (retval > 0) {
+		dev->chip_id = retval;
+
+		switch (dev->chip_id) {
+		case CHIP_ID_EM2710:
+			em28xx_info("chip ID is em2710\n");
+			break;
+		case CHIP_ID_EM2750:
+			em28xx_info("chip ID is em2750\n");
+			break;
+		case CHIP_ID_EM2820:
+			em28xx_info("chip ID is em2820 (or em2710)\n");
+			break;
+		case CHIP_ID_EM2840:
+			em28xx_info("chip ID is em2840\n");
+			break;
+		case CHIP_ID_EM2860:
+			em28xx_info("chip ID is em2860\n");
+			break;
+		case CHIP_ID_EM2870:
+			em28xx_info("chip ID is em2870\n");
+			dev->wait_after_write = 0;
+			break;
+		case CHIP_ID_EM2874:
+			em28xx_info("chip ID is em2874\n");
+			dev->reg_gpio_num = EM2874_R80_GPIO;
+			dev->wait_after_write = 0;
+			break;
+		case CHIP_ID_EM2883:
+			em28xx_info("chip ID is em2882/em2883\n");
+			dev->wait_after_write = 0;
+			break;
+		default:
+			em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
+		}
+	}
+
+	/* Prepopulate cached GPO register content */
+	retval = em28xx_read_reg(dev, dev->reg_gpo_num);
+	if (retval >= 0)
+		dev->reg_gpo = retval;
+
 	em28xx_pre_card_setup(dev);
 
 	if (!dev->board.is_em2800) {
@@ -2333,6 +2547,12 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 		return errCode;
 	}
 
+	/*
+	 * Default format, used for tvp5150 or saa711x output formats
+	 */
+	dev->vinmode = 0x10;
+	dev->vinctl  = 0x11;
+
 	/* Do board specific init and eeprom reading */
 	em28xx_card_setup(dev);
 
@@ -2573,6 +2793,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	retval = em28xx_init_dev(&dev, udev, interface, nr);
 	if (retval) {
 		em28xx_devused &= ~(1<<dev->devno);
+		mutex_unlock(&dev->lock);
 		kfree(dev);
 		goto err;
 	}
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index c8d7ce8fbd3..98e140b5d95 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -632,6 +632,9 @@ int em28xx_capture_start(struct em28xx *dev, int start)
 		return rc;
 	}
 
+	if (dev->board.is_webcam)
+		rc = em28xx_write_reg(dev, 0x13, 0x0c);
+
 	/* enable video capture */
 	rc = em28xx_write_reg(dev, 0x48, 0x00);
 
@@ -650,15 +653,15 @@ int em28xx_set_outfmt(struct em28xx *dev)
 	int ret;
 
 	ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT,
-				    dev->format->reg | 0x20, 0x3f);
+				dev->format->reg | 0x20, 0xff);
 	if (ret < 0)
-		return ret;
+			return ret;
 
-	ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10);
+	ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, dev->vinmode);
 	if (ret < 0)
 		return ret;
 
-	return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11);
+	return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, dev->vinctl);
 }
 
 static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
@@ -695,13 +698,16 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
 {
 	u8 mode;
 	/* the em2800 scaler only supports scaling down to 50% */
-	if (dev->board.is_em2800)
+
+	if (dev->board.is_em2800) {
 		mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
-	else {
+	} else {
 		u8 buf[2];
+
 		buf[0] = h;
 		buf[1] = h >> 8;
 		em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2);
+
 		buf[0] = v;
 		buf[1] = v >> 8;
 		em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2);
@@ -717,11 +723,17 @@ int em28xx_resolution_set(struct em28xx *dev)
 {
 	int width, height;
 	width = norm_maxw(dev);
-	height = norm_maxh(dev) >> 1;
+	height = norm_maxh(dev);
+
+	if (!dev->progressive)
+		height >>= norm_maxh(dev);
 
 	em28xx_set_outfmt(dev);
+
+
 	em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2);
 	em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2);
+
 	return em28xx_scaler_set(dev, dev->hscale, dev->vscale);
 }
 
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index e7b47c8da8f..d603575431b 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -31,6 +31,8 @@
 #include "lgdt330x.h"
 #include "zl10353.h"
 #include "s5h1409.h"
+#include "mt352.h"
+#include "mt352_priv.h" /* FIXME */
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -243,6 +245,14 @@ static struct s5h1409_config em28xx_s5h1409_with_xc3028 = {
 	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
 };
 
+static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = {
+	.demod_address = (0x1e >> 1),
+	.no_tuner = 1,
+	.disable_i2c_gate_ctrl = 1,
+	.parallel_ts = 1,
+	.if2 = 45600,
+};
+
 #ifdef EM28XX_DRX397XD_SUPPORT
 /* [TODO] djh - not sure yet what the device config needs to contain */
 static struct drx397xD_config em28xx_drx397xD_with_xc3028 = {
@@ -250,6 +260,41 @@ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = {
 };
 #endif
 
+static int mt352_terratec_xs_init(struct dvb_frontend *fe)
+{
+	/* Values extracted from a USB trace of the Terratec Windows driver */
+	static u8 clock_config[]   = { CLOCK_CTL,  0x38, 0x2c };
+	static u8 reset[]          = { RESET,      0x80 };
+	static u8 adc_ctl_1_cfg[]  = { ADC_CTL_1,  0x40 };
+	static u8 agc_cfg[]        = { AGC_TARGET, 0x28, 0xa0 };
+	static u8 input_freq_cfg[] = { INPUT_FREQ_1, 0x31, 0xb8 };
+	static u8 rs_err_cfg[]     = { RS_ERR_PER_1, 0x00, 0x4d };
+	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+	static u8 trl_nom_cfg[]    = { TRL_NOMINAL_RATE_1, 0x64, 0x00 };
+	static u8 tps_given_cfg[]  = { TPS_GIVEN_1, 0x40, 0x80, 0x50 };
+	static u8 tuner_go[]       = { TUNER_GO, 0x01};
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(200);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	mt352_write(fe, input_freq_cfg, sizeof(input_freq_cfg));
+	mt352_write(fe, rs_err_cfg,     sizeof(rs_err_cfg));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+	mt352_write(fe, trl_nom_cfg,    sizeof(trl_nom_cfg));
+	mt352_write(fe, tps_given_cfg,  sizeof(tps_given_cfg));
+	mt352_write(fe, tuner_go,       sizeof(tuner_go));
+	return 0;
+}
+
+static struct mt352_config terratec_xs_mt352_cfg = {
+	.demod_address = (0x1e >> 1),
+	.no_tuner = 1,
+	.if2 = 45600,
+	.demod_init = mt352_terratec_xs_init,
+};
+
 /* ------------------------------------------------------------------ */
 
 static int attach_xc3028(u8 addr, struct em28xx *dev)
@@ -432,10 +477,7 @@ static int dvb_init(struct em28xx *dev)
 			goto out_free;
 		}
 		break;
-	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
-	case EM2880_BOARD_TERRATEC_HYBRID_XS:
 	case EM2880_BOARD_KWORLD_DVB_310U:
-	case EM2880_BOARD_EMPIRE_DUAL_TV:
 		dvb->frontend = dvb_attach(zl10353_attach,
 					   &em28xx_zl10353_with_xc3028,
 					   &dev->i2c_adap);
@@ -444,6 +486,34 @@ static int dvb_init(struct em28xx *dev)
 			goto out_free;
 		}
 		break;
+	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+	case EM2880_BOARD_EMPIRE_DUAL_TV:
+		dvb->frontend = dvb_attach(zl10353_attach,
+					   &em28xx_zl10353_xc3028_no_i2c_gate,
+					   &dev->i2c_adap);
+		if (attach_xc3028(0x61, dev) < 0) {
+			result = -EINVAL;
+			goto out_free;
+		}
+		break;
+	case EM2880_BOARD_TERRATEC_HYBRID_XS:
+	case EM2881_BOARD_PINNACLE_HYBRID_PRO:
+		dvb->frontend = dvb_attach(zl10353_attach,
+					   &em28xx_zl10353_xc3028_no_i2c_gate,
+					   &dev->i2c_adap);
+		if (dvb->frontend == NULL) {
+			/* This board could have either a zl10353 or a mt352.
+			   If the chip id isn't for zl10353, try mt352 */
+			dvb->frontend = dvb_attach(mt352_attach,
+						   &terratec_xs_mt352_cfg,
+						   &dev->i2c_adap);
+		}
+
+		if (attach_xc3028(0x61, dev) < 0) {
+			result = -EINVAL;
+			goto out_free;
+		}
+		break;
 	case EM2883_BOARD_KWORLD_HYBRID_330U:
 	case EM2882_BOARD_EVGA_INDTUBE:
 		dvb->frontend = dvb_attach(s5h1409_attach,
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 2c86fcf089f..27e33a287df 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -483,7 +483,7 @@ static char *i2c_devs[128] = {
 	[0xa0 >> 1] = "eeprom",
 	[0xb0 >> 1] = "tda9874",
 	[0xb8 >> 1] = "tvp5150a",
-	[0xba >> 1] = "tvp5150a",
+	[0xba >> 1] = "webcam sensor or tvp5150a",
 	[0xc0 >> 1] = "tuner (analog)",
 	[0xc2 >> 1] = "tuner (analog)",
 	[0xc4 >> 1] = "tuner (analog)",
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index a2676d63cfd..6bf84bd787d 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -176,7 +176,8 @@
 
 /* FIXME: Need to be populated with the other chip ID's */
 enum em28xx_chip_id {
-	CHIP_ID_EM2820 = 18,	/* Also used by em2710 */
+	CHIP_ID_EM2710 = 17,
+	CHIP_ID_EM2820 = 18,	/* Also used by some em2710 */
 	CHIP_ID_EM2840 = 20,
 	CHIP_ID_EM2750 = 33,
 	CHIP_ID_EM2860 = 34,
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 8fe1beecfff..ab079d9256c 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -90,10 +90,35 @@ MODULE_PARM_DESC(video_debug, "enable debug messages [video]");
 /* supported video standards */
 static struct em28xx_fmt format[] = {
 	{
-		.name     = "16bpp YUY2, 4:2:2, packed",
+		.name     = "16 bpp YUY2, 4:2:2, packed",
 		.fourcc   = V4L2_PIX_FMT_YUYV,
 		.depth    = 16,
 		.reg	  = EM28XX_OUTFMT_YUV422_Y0UY1V,
+	}, {
+		.name     = "16 bpp RGB 565, LE",
+		.fourcc   = V4L2_PIX_FMT_RGB565,
+		.depth    = 16,
+		.reg      = EM28XX_OUTFMT_RGB_16_656,
+	}, {
+		.name     = "8 bpp Bayer BGBG..GRGR",
+		.fourcc   = V4L2_PIX_FMT_SBGGR8,
+		.depth    = 8,
+		.reg      = EM28XX_OUTFMT_RGB_8_BGBG,
+	}, {
+		.name     = "8 bpp Bayer GRGR..BGBG",
+		.fourcc   = V4L2_PIX_FMT_SGRBG8,
+		.depth    = 8,
+		.reg      = EM28XX_OUTFMT_RGB_8_GRGR,
+	}, {
+		.name     = "8 bpp Bayer GBGB..RGRG",
+		.fourcc   = V4L2_PIX_FMT_SGBRG8,
+		.depth    = 8,
+		.reg      = EM28XX_OUTFMT_RGB_8_GBGB,
+	}, {
+		.name     = "12 bpp YUV411",
+		.fourcc   = V4L2_PIX_FMT_YUV411P,
+		.depth    = 12,
+		.reg      = EM28XX_OUTFMT_YUV411,
 	},
 };
 
@@ -169,15 +194,24 @@ static void em28xx_copy_video(struct em28xx *dev,
 	startread = p;
 	remain = len;
 
-	/* Interlaces frame */
-	if (buf->top_field)
+	if (dev->progressive)
 		fieldstart = outp;
-	else
-		fieldstart = outp + bytesperline;
+	else {
+		/* Interlaces two half frames */
+		if (buf->top_field)
+			fieldstart = outp;
+		else
+			fieldstart = outp + bytesperline;
+	}
 
 	linesdone = dma_q->pos / bytesperline;
 	currlinedone = dma_q->pos % bytesperline;
-	offset = linesdone * bytesperline * 2 + currlinedone;
+
+	if (dev->progressive)
+		offset = linesdone * bytesperline + currlinedone;
+	else
+		offset = linesdone * bytesperline * 2 + currlinedone;
+
 	startwrite = fieldstart + offset;
 	lencopy = bytesperline - currlinedone;
 	lencopy = lencopy > remain ? remain : lencopy;
@@ -351,7 +385,7 @@ static inline int em28xx_isoc_copy(struct em28xx *dev, struct urb *urb)
 			em28xx_isocdbg("Video frame %d, length=%i, %s\n", p[2],
 				       len, (p[2] & 1) ? "odd" : "even");
 
-			if (!(p[2] & 1)) {
+			if (dev->progressive || !(p[2] & 1)) {
 				if (buf != NULL)
 					buffer_filled(dev, dma_q, buf);
 				get_next_buf(dma_q, &buf);
@@ -632,8 +666,8 @@ static void get_scale(struct em28xx *dev,
 			unsigned int width, unsigned int height,
 			unsigned int *hscale, unsigned int *vscale)
 {
-	unsigned int          maxw   = norm_maxw(dev);
-	unsigned int          maxh   = norm_maxh(dev);
+	unsigned int          maxw = norm_maxw(dev);
+	unsigned int          maxh = norm_maxh(dev);
 
 	*hscale = (((unsigned long)maxw) << 12) / width - 4096L;
 	if (*hscale >= 0x4000)
@@ -664,7 +698,10 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
 	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
 
 	/* FIXME: TOP? NONE? BOTTOM? ALTENATE? */
-	f->fmt.pix.field = dev->interlaced ?
+	if (dev->progressive)
+		f->fmt.pix.field = V4L2_FIELD_NONE;
+	else
+		f->fmt.pix.field = dev->interlaced ?
 			   V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP;
 
 	mutex_unlock(&dev->lock);
@@ -728,7 +765,33 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	f->fmt.pix.bytesperline = (dev->width * fmt->depth + 7) >> 3;
 	f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * height;
 	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
-	f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+	if (dev->progressive)
+		f->fmt.pix.field = V4L2_FIELD_NONE;
+	else
+		f->fmt.pix.field = dev->interlaced ?
+			   V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP;
+
+	return 0;
+}
+
+static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc,
+				   unsigned width, unsigned height)
+{
+	struct em28xx_fmt     *fmt;
+
+	fmt = format_by_fourcc(fourcc);
+	if (!fmt)
+		return -EINVAL;
+
+	dev->format = fmt;
+	dev->width  = width;
+	dev->height = height;
+
+	/* set new image size */
+	get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
+
+	em28xx_set_alternate(dev);
+	em28xx_resolution_set(dev);
 
 	return 0;
 }
@@ -739,7 +802,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	struct em28xx_fh      *fh  = priv;
 	struct em28xx         *dev = fh->dev;
 	int                   rc;
-	struct em28xx_fmt     *fmt;
 
 	rc = check_dev(dev);
 	if (rc < 0)
@@ -749,12 +811,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 
 	vidioc_try_fmt_vid_cap(file, priv, f);
 
-	fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	if (!fmt) {
-		rc = -EINVAL;
-		goto out;
-	}
-
 	if (videobuf_queue_is_busy(&fh->vb_vidq)) {
 		em28xx_errdev("%s queue busy\n", __func__);
 		rc = -EBUSY;
@@ -767,16 +823,8 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 		goto out;
 	}
 
-	/* set new image size */
-	dev->width = f->fmt.pix.width;
-	dev->height = f->fmt.pix.height;
-	dev->format = fmt;
-	get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
-
-	em28xx_set_alternate(dev);
-	em28xx_resolution_set(dev);
-
-	rc = 0;
+	rc = em28xx_set_video_format(dev, f->fmt.pix.pixelformat,
+				f->fmt.pix.width, f->fmt.pix.height);
 
 out:
 	mutex_unlock(&dev->lock);
@@ -814,6 +862,41 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm)
 	return 0;
 }
 
+static int vidioc_g_parm(struct file *file, void *priv,
+			 struct v4l2_streamparm *p)
+{
+	struct em28xx_fh   *fh  = priv;
+	struct em28xx      *dev = fh->dev;
+	int rc = 0;
+
+	if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	if (dev->board.is_webcam)
+		rc = v4l2_device_call_until_err(&dev->v4l2_dev, 0,
+						video, g_parm, p);
+	else
+		v4l2_video_std_frame_period(dev->norm,
+						 &p->parm.capture.timeperframe);
+
+	return rc;
+}
+
+static int vidioc_s_parm(struct file *file, void *priv,
+			 struct v4l2_streamparm *p)
+{
+	struct em28xx_fh   *fh  = priv;
+	struct em28xx      *dev = fh->dev;
+
+	if (!dev->board.is_webcam)
+		return -EINVAL;
+
+	if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	return v4l2_device_call_until_err(&dev->v4l2_dev, 0, video, s_parm, p);
+}
+
 static const char *iname[] = {
 	[EM28XX_VMUX_COMPOSITE1] = "Composite1",
 	[EM28XX_VMUX_COMPOSITE2] = "Composite2",
@@ -1592,6 +1675,7 @@ static int em28xx_v4l2_open(struct file *filp)
 	struct em28xx *dev;
 	enum v4l2_buf_type fh_type;
 	struct em28xx_fh *fh;
+	enum v4l2_field field;
 
 	dev = em28xx_get_device(minor, &fh_type, &radio);
 
@@ -1616,11 +1700,6 @@ static int em28xx_v4l2_open(struct file *filp)
 	filp->private_data = fh;
 
 	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) {
-		dev->width = norm_maxw(dev);
-		dev->height = norm_maxh(dev);
-		dev->hscale = 0;
-		dev->vscale = 0;
-
 		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
 		em28xx_set_alternate(dev);
 		em28xx_resolution_set(dev);
@@ -1638,8 +1717,13 @@ static int em28xx_v4l2_open(struct file *filp)
 
 	dev->users++;
 
+	if (dev->progressive)
+		field = V4L2_FIELD_NONE;
+	else
+		field = V4L2_FIELD_INTERLACED;
+
 	videobuf_queue_vmalloc_init(&fh->vb_vidq, &em28xx_video_qops,
-			NULL, &dev->slock, fh->type, V4L2_FIELD_INTERLACED,
+			NULL, &dev->slock, fh->type, field,
 			sizeof(struct em28xx_buffer), fh);
 
 	mutex_unlock(&dev->lock);
@@ -1858,6 +1942,8 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_qbuf                = vidioc_qbuf,
 	.vidioc_dqbuf               = vidioc_dqbuf,
 	.vidioc_s_std               = vidioc_s_std,
+	.vidioc_g_parm		    = vidioc_g_parm,
+	.vidioc_s_parm		    = vidioc_s_parm,
 	.vidioc_enum_input          = vidioc_enum_input,
 	.vidioc_g_input             = vidioc_g_input,
 	.vidioc_s_input             = vidioc_s_input,
@@ -1962,15 +2048,14 @@ int em28xx_register_analog_devices(struct em28xx *dev)
 
 	/* set default norm */
 	dev->norm = em28xx_video_template.current_norm;
-	dev->width = norm_maxw(dev);
-	dev->height = norm_maxh(dev);
 	dev->interlaced = EM28XX_INTERLACED_DEFAULT;
-	dev->hscale = 0;
-	dev->vscale = 0;
 	dev->ctl_input = 0;
 
 	/* Analog specific initialization */
 	dev->format = &format[0];
+	em28xx_set_video_format(dev, format[0].fourcc,
+				norm_maxw(dev), norm_maxh(dev));
+
 	video_mux(dev, dev->ctl_input);
 
 	/* Audio defaults */
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 813ce45c2f9..a2add61f7d5 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -107,6 +107,7 @@
 #define EM2860_BOARD_TERRATEC_AV350		  68
 #define EM2882_BOARD_KWORLD_ATSC_315U		  69
 #define EM2882_BOARD_EVGA_INDTUBE		  70
+#define EM2820_BOARD_SILVERCREST_WEBCAM           71
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
@@ -357,11 +358,18 @@ struct em28xx_input {
 #define INPUT(nr) (&em28xx_boards[dev->model].input[nr])
 
 enum em28xx_decoder {
-	EM28XX_NODECODER,
+	EM28XX_NODECODER = 0,
 	EM28XX_TVP5150,
 	EM28XX_SAA711X,
 };
 
+enum em28xx_sensor {
+	EM28XX_NOSENSOR = 0,
+	EM28XX_MT9V011,
+	EM28XX_MT9M001,
+	EM28XX_MT9M111,
+};
+
 enum em28xx_adecoder {
 	EM28XX_NOADECODER = 0,
 	EM28XX_TVAUDIO,
@@ -388,6 +396,7 @@ struct em28xx_board {
 	unsigned int max_range_640_480:1;
 	unsigned int has_dvb:1;
 	unsigned int has_snapshot_button:1;
+	unsigned int is_webcam:1;
 	unsigned int valid:1;
 
 	unsigned char xclk, i2c_speed;
@@ -471,6 +480,17 @@ struct em28xx {
 	struct v4l2_device v4l2_dev;
 	struct em28xx_board board;
 
+	/* Webcam specific fields */
+	enum em28xx_sensor em28xx_sensor;
+	int sensor_xres, sensor_yres;
+	int sensor_xtal;
+
+	/* Allows progressive (e. g. non-interlaced) mode */
+	int progressive;
+
+	/* Vinmode/Vinctl used at the driver */
+	int vinmode, vinctl;
+
 	unsigned int stream_on:1;	/* Locks streams */
 	unsigned int has_audio_class:1;
 	unsigned int has_alsa_audio:1;
@@ -751,17 +771,23 @@ static inline int em28xx_gamma_set(struct em28xx *dev, s32 val)
 /*FIXME: maxw should be dependent of alt mode */
 static inline unsigned int norm_maxw(struct em28xx *dev)
 {
+	if (dev->board.is_webcam)
+		return dev->sensor_xres;
+
 	if (dev->board.max_range_640_480)
 		return 640;
-	else
-		return 720;
+
+	return 720;
 }
 
 static inline unsigned int norm_maxh(struct em28xx *dev)
 {
+	if (dev->board.is_webcam)
+		return dev->sensor_yres;
+
 	if (dev->board.max_range_640_480)
 		return 480;
-	else
-		return (dev->norm & V4L2_STD_625_50) ? 576 : 480;
+
+	return (dev->norm & V4L2_STD_625_50) ? 576 : 480;
 }
 #endif
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 578dc4ffc96..e994dcac43f 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -102,6 +102,22 @@ config USB_GSPCA_PAC7311
 	  To compile this driver as a module, choose M here: the
 	  module will be called gspca_pac7311.
 
+config USB_GSPCA_SN9C20X
+       tristate "SN9C20X USB Camera Driver"
+       depends on VIDEO_V4L2 && USB_GSPCA
+       help
+	 Say Y here if you want support for cameras based on the
+	 sn9c20x chips (SN9C201 and SN9C202).
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called gspca_sn9c20x.
+
+config USB_GSPCA_SN9C20X_EVDEV
+       bool "Enable evdev support"
+	depends on USB_GSPCA_SN9C20X && INPUT
+       ---help---
+	 Say Y here in order to enable evdev support for sn9c20x webcam button.
+
 config USB_GSPCA_SONIXB
 	tristate "SONIX Bayer USB Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index 8a6643e8eb9..f6d3b86e9ad 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_USB_GSPCA_OV519)    += gspca_ov519.o
 obj-$(CONFIG_USB_GSPCA_OV534)    += gspca_ov534.o
 obj-$(CONFIG_USB_GSPCA_PAC207)   += gspca_pac207.o
 obj-$(CONFIG_USB_GSPCA_PAC7311)  += gspca_pac7311.o
+obj-$(CONFIG_USB_GSPCA_SN9C20X)  += gspca_sn9c20x.o
 obj-$(CONFIG_USB_GSPCA_SONIXB)   += gspca_sonixb.o
 obj-$(CONFIG_USB_GSPCA_SONIXJ)   += gspca_sonixj.o
 obj-$(CONFIG_USB_GSPCA_SPCA500)  += gspca_spca500.o
@@ -35,6 +36,7 @@ gspca_ov519-objs    := ov519.o
 gspca_ov534-objs    := ov534.o
 gspca_pac207-objs   := pac207.o
 gspca_pac7311-objs  := pac7311.o
+gspca_sn9c20x-objs  := sn9c20x.o
 gspca_sonixb-objs   := sonixb.o
 gspca_sonixj-objs   := sonixj.o
 gspca_spca500-objs  := spca500.o
diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index 219cfa6fb87..8d48ea1742c 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -846,6 +846,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (!sd->jpeg_hdr)
+		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x22);		/* JPEG 411 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 1e89600986c..b8561dfb6c8 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -727,6 +727,74 @@ static int gspca_get_mode(struct gspca_dev *gspca_dev,
 	return -EINVAL;
 }
 
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int vidioc_g_register(struct file *file, void *priv,
+			struct v4l2_dbg_register *reg)
+{
+	int ret;
+	struct gspca_dev *gspca_dev = priv;
+
+	if (!gspca_dev->sd_desc->get_chip_ident)
+		return -EINVAL;
+
+	if (!gspca_dev->sd_desc->get_register)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+		return -ERESTARTSYS;
+	if (gspca_dev->present)
+		ret = gspca_dev->sd_desc->get_register(gspca_dev, reg);
+	else
+		ret = -ENODEV;
+	mutex_unlock(&gspca_dev->usb_lock);
+
+	return ret;
+}
+
+static int vidioc_s_register(struct file *file, void *priv,
+			struct v4l2_dbg_register *reg)
+{
+	int ret;
+	struct gspca_dev *gspca_dev = priv;
+
+	if (!gspca_dev->sd_desc->get_chip_ident)
+		return -EINVAL;
+
+	if (!gspca_dev->sd_desc->set_register)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+		return -ERESTARTSYS;
+	if (gspca_dev->present)
+		ret = gspca_dev->sd_desc->set_register(gspca_dev, reg);
+	else
+		ret = -ENODEV;
+	mutex_unlock(&gspca_dev->usb_lock);
+
+	return ret;
+}
+#endif
+
+static int vidioc_g_chip_ident(struct file *file, void *priv,
+			struct v4l2_dbg_chip_ident *chip)
+{
+	int ret;
+	struct gspca_dev *gspca_dev = priv;
+
+	if (!gspca_dev->sd_desc->get_chip_ident)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+		return -ERESTARTSYS;
+	if (gspca_dev->present)
+		ret = gspca_dev->sd_desc->get_chip_ident(gspca_dev, chip);
+	else
+		ret = -ENODEV;
+	mutex_unlock(&gspca_dev->usb_lock);
+
+	return ret;
+}
+
 static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
 				struct v4l2_fmtdesc *fmtdesc)
 {
@@ -1883,6 +1951,11 @@ static const struct v4l2_ioctl_ops dev_ioctl_ops = {
 	.vidioc_s_parm		= vidioc_s_parm,
 	.vidioc_s_std		= vidioc_s_std,
 	.vidioc_enum_framesizes = vidioc_enum_framesizes,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register	= vidioc_g_register,
+	.vidioc_s_register	= vidioc_s_register,
+#endif
+	.vidioc_g_chip_ident	= vidioc_g_chip_ident,
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
 	.vidiocgmbuf          = vidiocgmbuf,
 #endif
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index bd1faff8864..46c4effdfcd 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -69,6 +69,10 @@ typedef void (*cam_v_op) (struct gspca_dev *);
 typedef int (*cam_cf_op) (struct gspca_dev *, const struct usb_device_id *);
 typedef int (*cam_jpg_op) (struct gspca_dev *,
 				struct v4l2_jpegcompression *);
+typedef int (*cam_reg_op) (struct gspca_dev *,
+				struct v4l2_dbg_register *);
+typedef int (*cam_ident_op) (struct gspca_dev *,
+				struct v4l2_dbg_chip_ident *);
 typedef int (*cam_streamparm_op) (struct gspca_dev *,
 				  struct v4l2_streamparm *);
 typedef int (*cam_qmnu_op) (struct gspca_dev *,
@@ -105,6 +109,11 @@ struct sd_desc {
 	cam_qmnu_op querymenu;
 	cam_streamparm_op get_streamparm;
 	cam_streamparm_op set_streamparm;
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	cam_reg_op set_register;
+	cam_reg_op get_register;
+#endif
+	cam_ident_op get_chip_ident;
 };
 
 /* packet types when moving from iso buf to frame buf */
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index 191bcd71897..0163903d1c0 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -476,9 +476,6 @@ static int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
 	err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
 	if (err < 0)
 		return err;
-	err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
-	if (err < 0)
-		return err;
 
 	err = m5602_read_sensor(sd, S5K4AA_READ_MODE, &data, 1);
 	if (err < 0)
@@ -524,9 +521,6 @@ static int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
 	err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
 	if (err < 0)
 		return err;
-	err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
-	if (err < 0)
-		return err;
 
 	err = m5602_read_sensor(sd, S5K4AA_READ_MODE, &data, 1);
 	if (err < 0)
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index 75e8d14e4ac..de769caf013 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -201,6 +201,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (!sd->jpeg_hdr)
+		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x21);		/* JPEG 422 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
new file mode 100644
index 00000000000..fcfbbd329b4
--- /dev/null
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -0,0 +1,2434 @@
+/*
+ *	Sonix sn9c201 sn9c202 library
+ *	Copyright (C) 2008-2009 microdia project <microdia@googlegroups.com>
+ *	Copyright (C) 2009 Brian Johnson <brijohn@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/usb/input.h>
+#include <linux/input.h>
+#endif
+
+#include "gspca.h"
+#include "jpeg.h"
+
+#include <media/v4l2-chip-ident.h>
+
+MODULE_AUTHOR("Brian Johnson <brijohn@gmail.com>, "
+		"microdia project <microdia@googlegroups.com>");
+MODULE_DESCRIPTION("GSPCA/SN9C20X USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+#define MODULE_NAME "sn9c20x"
+
+#define MODE_RAW	0x10
+#define MODE_JPEG	0x20
+#define MODE_SXGA	0x80
+
+#define SENSOR_OV9650	0
+#define SENSOR_OV9655	1
+#define SENSOR_SOI968	2
+#define SENSOR_OV7660	3
+#define SENSOR_OV7670	4
+#define SENSOR_MT9V011	5
+#define SENSOR_MT9V111	6
+#define SENSOR_MT9V112	7
+#define SENSOR_MT9M001	8
+#define SENSOR_MT9M111	9
+#define SENSOR_HV7131R	10
+#define SENSOR_MT9VPRB	20
+
+/* specific webcam descriptor */
+struct sd {
+	struct gspca_dev gspca_dev;
+
+#define MIN_AVG_LUM 80
+#define MAX_AVG_LUM 130
+	atomic_t avg_lum;
+	u8 old_step;
+	u8 older_step;
+	u8 exposure_step;
+
+	u8 brightness;
+	u8 contrast;
+	u8 saturation;
+	s16 hue;
+	u8 gamma;
+	u8 red;
+	u8 blue;
+
+	u8 hflip;
+	u8 vflip;
+	u8 gain;
+	u16 exposure;
+	u8 auto_exposure;
+
+	u8 i2c_addr;
+	u8 sensor;
+	u8 hstart;
+	u8 vstart;
+
+	u8 *jpeg_hdr;
+	u8 quality;
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+	struct input_dev *input_dev;
+	u8 input_gpio;
+	struct task_struct *input_task;
+#endif
+};
+
+static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_sethue(struct gspca_dev *gspca_dev, s32 val);
+static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val);
+static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val);
+
+static struct ctrl sd_ctrls[] = {
+	{
+#define BRIGHTNESS_IDX 0
+	    {
+		.id      = V4L2_CID_BRIGHTNESS,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Brightness",
+		.minimum = 0,
+		.maximum = 0xff,
+		.step    = 1,
+#define BRIGHTNESS_DEFAULT 0x7f
+		.default_value = BRIGHTNESS_DEFAULT,
+	    },
+	    .set = sd_setbrightness,
+	    .get = sd_getbrightness,
+	},
+	{
+#define CONTRAST_IDX 1
+	    {
+		.id      = V4L2_CID_CONTRAST,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Contrast",
+		.minimum = 0,
+		.maximum = 0xff,
+		.step    = 1,
+#define CONTRAST_DEFAULT 0x7f
+		.default_value = CONTRAST_DEFAULT,
+	    },
+	    .set = sd_setcontrast,
+	    .get = sd_getcontrast,
+	},
+	{
+#define SATURATION_IDX 2
+	    {
+		.id      = V4L2_CID_SATURATION,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Saturation",
+		.minimum = 0,
+		.maximum = 0xff,
+		.step    = 1,
+#define SATURATION_DEFAULT 0x7f
+		.default_value = SATURATION_DEFAULT,
+	    },
+	    .set = sd_setsaturation,
+	    .get = sd_getsaturation,
+	},
+	{
+#define HUE_IDX 3
+	    {
+		.id      = V4L2_CID_HUE,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Hue",
+		.minimum = -180,
+		.maximum = 180,
+		.step    = 1,
+#define HUE_DEFAULT 0
+		.default_value = HUE_DEFAULT,
+	    },
+	    .set = sd_sethue,
+	    .get = sd_gethue,
+	},
+	{
+#define GAMMA_IDX 4
+	    {
+		.id      = V4L2_CID_GAMMA,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Gamma",
+		.minimum = 0,
+		.maximum = 0xff,
+		.step    = 1,
+#define GAMMA_DEFAULT 0x10
+		.default_value = GAMMA_DEFAULT,
+	    },
+	    .set = sd_setgamma,
+	    .get = sd_getgamma,
+	},
+	{
+#define BLUE_IDX 5
+	    {
+		.id	 = V4L2_CID_BLUE_BALANCE,
+		.type	 = V4L2_CTRL_TYPE_INTEGER,
+		.name	 = "Blue Balance",
+		.minimum = 0,
+		.maximum = 0x7f,
+		.step	 = 1,
+#define BLUE_DEFAULT 0x28
+		.default_value = BLUE_DEFAULT,
+	    },
+	    .set = sd_setbluebalance,
+	    .get = sd_getbluebalance,
+	},
+	{
+#define RED_IDX 6
+	    {
+		.id	 = V4L2_CID_RED_BALANCE,
+		.type	 = V4L2_CTRL_TYPE_INTEGER,
+		.name	 = "Red Balance",
+		.minimum = 0,
+		.maximum = 0x7f,
+		.step	 = 1,
+#define RED_DEFAULT 0x28
+		.default_value = RED_DEFAULT,
+	    },
+	    .set = sd_setredbalance,
+	    .get = sd_getredbalance,
+	},
+	{
+#define HFLIP_IDX 7
+	    {
+		.id      = V4L2_CID_HFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Horizontal Flip",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define HFLIP_DEFAULT 0
+		.default_value = HFLIP_DEFAULT,
+	    },
+	    .set = sd_sethflip,
+	    .get = sd_gethflip,
+	},
+	{
+#define VFLIP_IDX 8
+	    {
+		.id      = V4L2_CID_VFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Vertical Flip",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define VFLIP_DEFAULT 0
+		.default_value = VFLIP_DEFAULT,
+	    },
+	    .set = sd_setvflip,
+	    .get = sd_getvflip,
+	},
+	{
+#define EXPOSURE_IDX 9
+	    {
+		.id      = V4L2_CID_EXPOSURE,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Exposure",
+		.minimum = 0,
+		.maximum = 0x1780,
+		.step    = 1,
+#define EXPOSURE_DEFAULT 0x33
+		.default_value = EXPOSURE_DEFAULT,
+	    },
+	    .set = sd_setexposure,
+	    .get = sd_getexposure,
+	},
+	{
+#define GAIN_IDX 10
+	    {
+		.id      = V4L2_CID_GAIN,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Gain",
+		.minimum = 0,
+		.maximum = 28,
+		.step    = 1,
+#define GAIN_DEFAULT 0x00
+		.default_value = GAIN_DEFAULT,
+	    },
+	    .set = sd_setgain,
+	    .get = sd_getgain,
+	},
+	{
+#define AUTOGAIN_IDX 11
+	    {
+		.id      = V4L2_CID_AUTOGAIN,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Auto Exposure",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define AUTO_EXPOSURE_DEFAULT 1
+		.default_value = AUTO_EXPOSURE_DEFAULT,
+	    },
+	    .set = sd_setautoexposure,
+	    .get = sd_getautoexposure,
+	},
+};
+
+static const struct v4l2_pix_format vga_mode[] = {
+	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 240,
+		.sizeimage = 240 * 120,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 0 | MODE_JPEG},
+	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0 | MODE_RAW},
+	{160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+		.bytesperline = 240,
+		.sizeimage = 240 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0},
+	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 480,
+		.sizeimage = 480 * 240 ,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 1 | MODE_JPEG},
+	{320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 ,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1 | MODE_RAW},
+	{320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+		.bytesperline = 480,
+		.sizeimage = 480 * 240 ,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1},
+	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 960,
+		.sizeimage = 960 * 480,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 2 | MODE_JPEG},
+	{640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2 | MODE_RAW},
+	{640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+		.bytesperline = 960,
+		.sizeimage = 960 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2},
+};
+
+static const struct v4l2_pix_format sxga_mode[] = {
+	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 240,
+		.sizeimage = 240 * 120,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 0 | MODE_JPEG},
+	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0 | MODE_RAW},
+	{160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+		.bytesperline = 240,
+		.sizeimage = 240 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0},
+	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 480,
+		.sizeimage = 480 * 240 ,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 1 | MODE_JPEG},
+	{320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 ,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1 | MODE_RAW},
+	{320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+		.bytesperline = 480,
+		.sizeimage = 480 * 240 ,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1},
+	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 960,
+		.sizeimage = 960 * 480,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 2 | MODE_JPEG},
+	{640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2 | MODE_RAW},
+	{640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+		.bytesperline = 960,
+		.sizeimage = 960 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2},
+	{1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 1280,
+		.sizeimage = (1280 * 1024) + 64,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 3 | MODE_RAW | MODE_SXGA},
+};
+
+static const int hsv_red_x[] = {
+	41,  44,  46,  48,  50,  52,  54,  56,
+	58,  60,  62,  64,  66,  68,  70,  72,
+	74,  76,  78,  80,  81,  83,  85,  87,
+	88,  90,  92,  93,  95,  97,  98, 100,
+	101, 102, 104, 105, 107, 108, 109, 110,
+	112, 113, 114, 115, 116, 117, 118, 119,
+	120, 121, 122, 123, 123, 124, 125, 125,
+	126, 127, 127, 128, 128, 129, 129, 129,
+	130, 130, 130, 130, 131, 131, 131, 131,
+	131, 131, 131, 131, 130, 130, 130, 130,
+	129, 129, 129, 128, 128, 127, 127, 126,
+	125, 125, 124, 123, 122, 122, 121, 120,
+	119, 118, 117, 116, 115, 114, 112, 111,
+	110, 109, 107, 106, 105, 103, 102, 101,
+	99,  98,  96,  94,  93,  91,  90,  88,
+	86,  84,  83,  81,  79,  77,  75,  74,
+	72,  70,  68,  66,  64,  62,  60,  58,
+	56,  54,  52,  49,  47,  45,  43,  41,
+	39,  36,  34,  32,  30,  28,  25,  23,
+	21,  19,  16,  14,  12,   9,   7,   5,
+	3,   0,  -1,  -3,  -6,  -8, -10, -12,
+	-15, -17, -19, -22, -24, -26, -28, -30,
+	-33, -35, -37, -39, -41, -44, -46, -48,
+	-50, -52, -54, -56, -58, -60, -62, -64,
+	-66, -68, -70, -72, -74, -76, -78, -80,
+	-81, -83, -85, -87, -88, -90, -92, -93,
+	-95, -97, -98, -100, -101, -102, -104, -105,
+	-107, -108, -109, -110, -112, -113, -114, -115,
+	-116, -117, -118, -119, -120, -121, -122, -123,
+	-123, -124, -125, -125, -126, -127, -127, -128,
+	-128, -128, -128, -128, -128, -128, -128, -128,
+	-128, -128, -128, -128, -128, -128, -128, -128,
+	-128, -128, -128, -128, -128, -128, -128, -128,
+	-128, -127, -127, -126, -125, -125, -124, -123,
+	-122, -122, -121, -120, -119, -118, -117, -116,
+	-115, -114, -112, -111, -110, -109, -107, -106,
+	-105, -103, -102, -101, -99, -98, -96, -94,
+	-93, -91, -90, -88, -86, -84, -83, -81,
+	-79, -77, -75, -74, -72, -70, -68, -66,
+	-64, -62, -60, -58, -56, -54, -52, -49,
+	-47, -45, -43, -41, -39, -36, -34, -32,
+	-30, -28, -25, -23, -21, -19, -16, -14,
+	-12,  -9,  -7,  -5,  -3,   0,   1,   3,
+	6,   8,  10,  12,  15,  17,  19,  22,
+	24,  26,  28,  30,  33,  35,  37,  39, 41
+};
+
+static const int hsv_red_y[] = {
+	82,  80,  78,  76,  74,  73,  71,  69,
+	67,  65,  63,  61,  58,  56,  54,  52,
+	50,  48,  46,  44,  41,  39,  37,  35,
+	32,  30,  28,  26,  23,  21,  19,  16,
+	14,  12,  10,   7,   5,   3,   0,  -1,
+	-3,  -6,  -8, -10, -13, -15, -17, -19,
+	-22, -24, -26, -29, -31, -33, -35, -38,
+	-40, -42, -44, -46, -48, -51, -53, -55,
+	-57, -59, -61, -63, -65, -67, -69, -71,
+	-73, -75, -77, -79, -81, -82, -84, -86,
+	-88, -89, -91, -93, -94, -96, -98, -99,
+	-101, -102, -104, -105, -106, -108, -109, -110,
+	-112, -113, -114, -115, -116, -117, -119, -120,
+	-120, -121, -122, -123, -124, -125, -126, -126,
+	-127, -128, -128, -128, -128, -128, -128, -128,
+	-128, -128, -128, -128, -128, -128, -128, -128,
+	-128, -128, -128, -128, -128, -128, -128, -128,
+	-128, -128, -128, -128, -128, -128, -128, -128,
+	-127, -127, -126, -125, -125, -124, -123, -122,
+	-121, -120, -119, -118, -117, -116, -115, -114,
+	-113, -111, -110, -109, -107, -106, -105, -103,
+	-102, -100, -99, -97, -96, -94, -92, -91,
+	-89, -87, -85, -84, -82, -80, -78, -76,
+	-74, -73, -71, -69, -67, -65, -63, -61,
+	-58, -56, -54, -52, -50, -48, -46, -44,
+	-41, -39, -37, -35, -32, -30, -28, -26,
+	-23, -21, -19, -16, -14, -12, -10,  -7,
+	-5,  -3,   0,   1,   3,   6,   8,  10,
+	13,  15,  17,  19,  22,  24,  26,  29,
+	31,  33,  35,  38,  40,  42,  44,  46,
+	48,  51,  53,  55,  57,  59,  61,  63,
+	65,  67,  69,  71,  73,  75,  77,  79,
+	81,  82,  84,  86,  88,  89,  91,  93,
+	94,  96,  98,  99, 101, 102, 104, 105,
+	106, 108, 109, 110, 112, 113, 114, 115,
+	116, 117, 119, 120, 120, 121, 122, 123,
+	124, 125, 126, 126, 127, 128, 128, 129,
+	129, 130, 130, 131, 131, 131, 131, 132,
+	132, 132, 132, 132, 132, 132, 132, 132,
+	132, 132, 132, 131, 131, 131, 130, 130,
+	130, 129, 129, 128, 127, 127, 126, 125,
+	125, 124, 123, 122, 121, 120, 119, 118,
+	117, 116, 115, 114, 113, 111, 110, 109,
+	107, 106, 105, 103, 102, 100,  99,  97,
+	96, 94, 92, 91, 89, 87, 85, 84, 82
+};
+
+static const int hsv_green_x[] = {
+	-124, -124, -125, -125, -125, -125, -125, -125,
+	-125, -126, -126, -125, -125, -125, -125, -125,
+	-125, -124, -124, -124, -123, -123, -122, -122,
+	-121, -121, -120, -120, -119, -118, -117, -117,
+	-116, -115, -114, -113, -112, -111, -110, -109,
+	-108, -107, -105, -104, -103, -102, -100, -99,
+	-98, -96, -95, -93, -92, -91, -89, -87,
+	-86, -84, -83, -81, -79, -77, -76, -74,
+	-72, -70, -69, -67, -65, -63, -61, -59,
+	-57, -55, -53, -51, -49, -47, -45, -43,
+	-41, -39, -37, -35, -33, -30, -28, -26,
+	-24, -22, -20, -18, -15, -13, -11,  -9,
+	-7,  -4,  -2,   0,   1,   3,   6,   8,
+	10,  12,  14,  17,  19,  21,  23,  25,
+	27,  29,  32,  34,  36,  38,  40,  42,
+	44,  46,  48,  50,  52,  54,  56,  58,
+	60,  62,  64,  66,  68,  70,  71,  73,
+	75,  77,  78,  80,  82,  83,  85,  87,
+	88,  90,  91,  93,  94,  96,  97,  98,
+	100, 101, 102, 104, 105, 106, 107, 108,
+	109, 111, 112, 113, 113, 114, 115, 116,
+	117, 118, 118, 119, 120, 120, 121, 122,
+	122, 123, 123, 124, 124, 124, 125, 125,
+	125, 125, 125, 125, 125, 126, 126, 125,
+	125, 125, 125, 125, 125, 124, 124, 124,
+	123, 123, 122, 122, 121, 121, 120, 120,
+	119, 118, 117, 117, 116, 115, 114, 113,
+	112, 111, 110, 109, 108, 107, 105, 104,
+	103, 102, 100,  99,  98,  96,  95,  93,
+	92,  91,  89,  87,  86,  84,  83,  81,
+	79,  77,  76,  74,  72,  70,  69,  67,
+	65,  63,  61,  59,  57,  55,  53,  51,
+	49,  47,  45,  43,  41,  39,  37,  35,
+	33,  30,  28,  26,  24,  22,  20,  18,
+	15,  13,  11,   9,   7,   4,   2,   0,
+	-1,  -3,  -6,  -8, -10, -12, -14, -17,
+	-19, -21, -23, -25, -27, -29, -32, -34,
+	-36, -38, -40, -42, -44, -46, -48, -50,
+	-52, -54, -56, -58, -60, -62, -64, -66,
+	-68, -70, -71, -73, -75, -77, -78, -80,
+	-82, -83, -85, -87, -88, -90, -91, -93,
+	-94, -96, -97, -98, -100, -101, -102, -104,
+	-105, -106, -107, -108, -109, -111, -112, -113,
+	-113, -114, -115, -116, -117, -118, -118, -119,
+	-120, -120, -121, -122, -122, -123, -123, -124, -124
+};
+
+static const int hsv_green_y[] = {
+	-100, -99, -98, -97, -95, -94, -93, -91,
+	-90, -89, -87, -86, -84, -83, -81, -80,
+	-78, -76, -75, -73, -71, -70, -68, -66,
+	-64, -63, -61, -59, -57, -55, -53, -51,
+	-49, -48, -46, -44, -42, -40, -38, -36,
+	-34, -32, -30, -27, -25, -23, -21, -19,
+	-17, -15, -13, -11,  -9,  -7,  -4,  -2,
+	0,   1,   3,   5,   7,   9,  11,  14,
+	16,  18,  20,  22,  24,  26,  28,  30,
+	32,  34,  36,  38,  40,  42,  44,  46,
+	48,  50,  52,  54,  56,  58,  59,  61,
+	63,  65,  67,  68,  70,  72,  74,  75,
+	77,  78,  80,  82,  83,  85,  86,  88,
+	89,  90,  92,  93,  95,  96,  97,  98,
+	100, 101, 102, 103, 104, 105, 106, 107,
+	108, 109, 110, 111, 112, 112, 113, 114,
+	115, 115, 116, 116, 117, 117, 118, 118,
+	119, 119, 119, 120, 120, 120, 120, 120,
+	121, 121, 121, 121, 121, 121, 120, 120,
+	120, 120, 120, 119, 119, 119, 118, 118,
+	117, 117, 116, 116, 115, 114, 114, 113,
+	112, 111, 111, 110, 109, 108, 107, 106,
+	105, 104, 103, 102, 100,  99,  98,  97,
+	95,  94,  93,  91,  90,  89,  87,  86,
+	84,  83,  81,  80,  78,  76,  75,  73,
+	71,  70,  68,  66,  64,  63,  61,  59,
+	57,  55,  53,  51,  49,  48,  46,  44,
+	42,  40,  38,  36,  34,  32,  30,  27,
+	25,  23,  21,  19,  17,  15,  13,  11,
+	9,   7,   4,   2,   0,  -1,  -3,  -5,
+	-7,  -9, -11, -14, -16, -18, -20, -22,
+	-24, -26, -28, -30, -32, -34, -36, -38,
+	-40, -42, -44, -46, -48, -50, -52, -54,
+	-56, -58, -59, -61, -63, -65, -67, -68,
+	-70, -72, -74, -75, -77, -78, -80, -82,
+	-83, -85, -86, -88, -89, -90, -92, -93,
+	-95, -96, -97, -98, -100, -101, -102, -103,
+	-104, -105, -106, -107, -108, -109, -110, -111,
+	-112, -112, -113, -114, -115, -115, -116, -116,
+	-117, -117, -118, -118, -119, -119, -119, -120,
+	-120, -120, -120, -120, -121, -121, -121, -121,
+	-121, -121, -120, -120, -120, -120, -120, -119,
+	-119, -119, -118, -118, -117, -117, -116, -116,
+	-115, -114, -114, -113, -112, -111, -111, -110,
+	-109, -108, -107, -106, -105, -104, -103, -102, -100
+};
+
+static const int hsv_blue_x[] = {
+	112, 113, 114, 114, 115, 116, 117, 117,
+	118, 118, 119, 119, 120, 120, 120, 121,
+	121, 121, 122, 122, 122, 122, 122, 122,
+	122, 122, 122, 122, 122, 122, 121, 121,
+	121, 120, 120, 120, 119, 119, 118, 118,
+	117, 116, 116, 115, 114, 113, 113, 112,
+	111, 110, 109, 108, 107, 106, 105, 104,
+	103, 102, 100,  99,  98,  97,  95,  94,
+	93,  91,  90,  88,  87,  85,  84,  82,
+	80,  79,  77,  76,  74,  72,  70,  69,
+	67,  65,  63,  61,  60,  58,  56,  54,
+	52,  50,  48,  46,  44,  42,  40,  38,
+	36,  34,  32,  30,  28,  26,  24,  22,
+	19,  17,  15,  13,  11,   9,   7,   5,
+	2,   0,  -1,  -3,  -5,  -7,  -9, -12,
+	-14, -16, -18, -20, -22, -24, -26, -28,
+	-31, -33, -35, -37, -39, -41, -43, -45,
+	-47, -49, -51, -53, -54, -56, -58, -60,
+	-62, -64, -66, -67, -69, -71, -73, -74,
+	-76, -78, -79, -81, -83, -84, -86, -87,
+	-89, -90, -92, -93, -94, -96, -97, -98,
+	-99, -101, -102, -103, -104, -105, -106, -107,
+	-108, -109, -110, -111, -112, -113, -114, -114,
+	-115, -116, -117, -117, -118, -118, -119, -119,
+	-120, -120, -120, -121, -121, -121, -122, -122,
+	-122, -122, -122, -122, -122, -122, -122, -122,
+	-122, -122, -121, -121, -121, -120, -120, -120,
+	-119, -119, -118, -118, -117, -116, -116, -115,
+	-114, -113, -113, -112, -111, -110, -109, -108,
+	-107, -106, -105, -104, -103, -102, -100, -99,
+	-98, -97, -95, -94, -93, -91, -90, -88,
+	-87, -85, -84, -82, -80, -79, -77, -76,
+	-74, -72, -70, -69, -67, -65, -63, -61,
+	-60, -58, -56, -54, -52, -50, -48, -46,
+	-44, -42, -40, -38, -36, -34, -32, -30,
+	-28, -26, -24, -22, -19, -17, -15, -13,
+	-11,  -9,  -7,  -5,  -2,   0,   1,   3,
+	5,   7,   9,  12,  14,  16,  18,  20,
+	22,  24,  26,  28,  31,  33,  35,  37,
+	39,  41,  43,  45,  47,  49,  51,  53,
+	54,  56,  58,  60,  62,  64,  66,  67,
+	69,  71,  73,  74,  76,  78,  79,  81,
+	83,  84,  86,  87,  89,  90,  92,  93,
+	94,  96,  97,  98,  99, 101, 102, 103,
+	104, 105, 106, 107, 108, 109, 110, 111, 112
+};
+
+static const int hsv_blue_y[] = {
+	-11, -13, -15, -17, -19, -21, -23, -25,
+	-27, -29, -31, -33, -35, -37, -39, -41,
+	-43, -45, -46, -48, -50, -52, -54, -55,
+	-57, -59, -61, -62, -64, -66, -67, -69,
+	-71, -72, -74, -75, -77, -78, -80, -81,
+	-83, -84, -86, -87, -88, -90, -91, -92,
+	-93, -95, -96, -97, -98, -99, -100, -101,
+	-102, -103, -104, -105, -106, -106, -107, -108,
+	-109, -109, -110, -111, -111, -112, -112, -113,
+	-113, -114, -114, -114, -115, -115, -115, -115,
+	-116, -116, -116, -116, -116, -116, -116, -116,
+	-116, -115, -115, -115, -115, -114, -114, -114,
+	-113, -113, -112, -112, -111, -111, -110, -110,
+	-109, -108, -108, -107, -106, -105, -104, -103,
+	-102, -101, -100, -99, -98, -97, -96, -95,
+	-94, -93, -91, -90, -89, -88, -86, -85,
+	-84, -82, -81, -79, -78, -76, -75, -73,
+	-71, -70, -68, -67, -65, -63, -62, -60,
+	-58, -56, -55, -53, -51, -49, -47, -45,
+	-44, -42, -40, -38, -36, -34, -32, -30,
+	-28, -26, -24, -22, -20, -18, -16, -14,
+	-12, -10,  -8,  -6,  -4,  -2,   0,   1,
+	3,   5,   7,   9,  11,  13,  15,  17,
+	19,  21,  23,  25,  27,  29,  31,  33,
+	35,  37,  39,  41,  43,  45,  46,  48,
+	50,  52,  54,  55,  57,  59,  61,  62,
+	64,  66,  67,  69,  71,  72,  74,  75,
+	77,  78,  80,  81,  83,  84,  86,  87,
+	88,  90,  91,  92,  93,  95,  96,  97,
+	98,  99, 100, 101, 102, 103, 104, 105,
+	106, 106, 107, 108, 109, 109, 110, 111,
+	111, 112, 112, 113, 113, 114, 114, 114,
+	115, 115, 115, 115, 116, 116, 116, 116,
+	116, 116, 116, 116, 116, 115, 115, 115,
+	115, 114, 114, 114, 113, 113, 112, 112,
+	111, 111, 110, 110, 109, 108, 108, 107,
+	106, 105, 104, 103, 102, 101, 100,  99,
+	98,  97,  96,  95,  94,  93,  91,  90,
+	89,  88,  86,  85,  84,  82,  81,  79,
+	78,  76,  75,  73,  71,  70,  68,  67,
+	65,  63,  62,  60,  58,  56,  55,  53,
+	51,  49,  47,  45,  44,  42,  40,  38,
+	36,  34,  32,  30,  28,  26,  24,  22,
+	20,  18,  16,  14,  12,  10,   8,   6,
+	4,   2,   0,  -1,  -3,  -5,  -7,  -9, -11
+};
+
+static u16 i2c_ident[] = {
+	V4L2_IDENT_OV9650,
+	V4L2_IDENT_OV9655,
+	V4L2_IDENT_SOI968,
+	V4L2_IDENT_OV7660,
+	V4L2_IDENT_OV7670,
+	V4L2_IDENT_MT9V011,
+	V4L2_IDENT_MT9V111,
+	V4L2_IDENT_MT9V112,
+	V4L2_IDENT_MT9M001C12ST,
+	V4L2_IDENT_MT9M111,
+	V4L2_IDENT_HV7131R,
+};
+
+static u16 bridge_init[][2] = {
+	{0x1000, 0x78}, {0x1001, 0x40}, {0x1002, 0x1c},
+	{0x1020, 0x80}, {0x1061, 0x01}, {0x1067, 0x40},
+	{0x1068, 0x30}, {0x1069, 0x20},	{0x106a, 0x10},
+	{0x106b, 0x08},	{0x1188, 0x87},	{0x11a1, 0x00},
+	{0x11a2, 0x00},	{0x11a3, 0x6a},	{0x11a4, 0x50},
+	{0x11ab, 0x00},	{0x11ac, 0x00},	{0x11ad, 0x50},
+	{0x11ae, 0x3c},	{0x118a, 0x04},	{0x0395, 0x04},
+	{0x11b8, 0x3a},	{0x118b, 0x0e},	{0x10f7, 0x05},
+	{0x10f8, 0x14},	{0x10fa, 0xff},	{0x10f9, 0x00},
+	{0x11ba, 0x0a},	{0x11a5, 0x2d},	{0x11a6, 0x2d},
+	{0x11a7, 0x3a},	{0x11a8, 0x05},	{0x11a9, 0x04},
+	{0x11aa, 0x3f},	{0x11af, 0x28},	{0x11b0, 0xd8},
+	{0x11b1, 0x14},	{0x11b2, 0xec},	{0x11b3, 0x32},
+	{0x11b4, 0xdd},	{0x11b5, 0x32},	{0x11b6, 0xdd},
+	{0x10e0, 0x2c},	{0x11bc, 0x40},	{0x11bd, 0x01},
+	{0x11be, 0xf0},	{0x11bf, 0x00},	{0x118c, 0x1f},
+	{0x118d, 0x1f},	{0x118e, 0x1f},	{0x118f, 0x1f},
+	{0x1180, 0x01},	{0x1181, 0x00},	{0x1182, 0x01},
+	{0x1183, 0x00},	{0x1184, 0x50},	{0x1185, 0x80}
+};
+
+/* Gain = (bit[3:0] / 16 + 1) * (bit[4] + 1) * (bit[5] + 1) * (bit[6] + 1) */
+static u8 ov_gain[] = {
+	0x00 /* 1x */, 0x04 /* 1.25x */, 0x08 /* 1.5x */, 0x0c /* 1.75x */,
+	0x10 /* 2x */, 0x12 /* 2.25x */, 0x14 /* 2.5x */, 0x16 /* 2.75x */,
+	0x18 /* 3x */, 0x1a /* 3.25x */, 0x1c /* 3.5x */, 0x1e /* 3.75x */,
+	0x30 /* 4x */, 0x31 /* 4.25x */, 0x32 /* 4.5x */, 0x33 /* 4.75x */,
+	0x34 /* 5x */, 0x35 /* 5.25x */, 0x36 /* 5.5x */, 0x37 /* 5.75x */,
+	0x38 /* 6x */, 0x39 /* 6.25x */, 0x3a /* 6.5x */, 0x3b /* 6.75x */,
+	0x3c /* 7x */, 0x3d /* 7.25x */, 0x3e /* 7.5x */, 0x3f /* 7.75x */,
+	0x70 /* 8x */
+};
+
+/* Gain = (bit[8] + 1) * (bit[7] + 1) * (bit[6:0] * 0.03125) */
+static u16 micron1_gain[] = {
+	/* 1x   1.25x   1.5x    1.75x */
+	0x0020, 0x0028, 0x0030, 0x0038,
+	/* 2x   2.25x   2.5x    2.75x */
+	0x00a0, 0x00a4, 0x00a8, 0x00ac,
+	/* 3x   3.25x   3.5x    3.75x */
+	0x00b0, 0x00b4, 0x00b8, 0x00bc,
+	/* 4x   4.25x   4.5x    4.75x */
+	0x00c0, 0x00c4, 0x00c8, 0x00cc,
+	/* 5x   5.25x   5.5x    5.75x */
+	0x00d0, 0x00d4, 0x00d8, 0x00dc,
+	/* 6x   6.25x   6.5x    6.75x */
+	0x00e0, 0x00e4, 0x00e8, 0x00ec,
+	/* 7x   7.25x   7.5x    7.75x */
+	0x00f0, 0x00f4, 0x00f8, 0x00fc,
+	/* 8x */
+	0x01c0
+};
+
+/* mt9m001 sensor uses a different gain formula then other micron sensors */
+/* Gain = (bit[6] + 1) * (bit[5-0] * 0.125) */
+static u16 micron2_gain[] = {
+	/* 1x   1.25x   1.5x    1.75x */
+	0x0008, 0x000a, 0x000c, 0x000e,
+	/* 2x   2.25x   2.5x    2.75x */
+	0x0010, 0x0012, 0x0014, 0x0016,
+	/* 3x   3.25x   3.5x    3.75x */
+	0x0018, 0x001a, 0x001c, 0x001e,
+	/* 4x   4.25x   4.5x    4.75x */
+	0x0020, 0x0051, 0x0052, 0x0053,
+	/* 5x   5.25x   5.5x    5.75x */
+	0x0054, 0x0055, 0x0056, 0x0057,
+	/* 6x   6.25x   6.5x    6.75x */
+	0x0058, 0x0059, 0x005a, 0x005b,
+	/* 7x   7.25x   7.5x    7.75x */
+	0x005c, 0x005d, 0x005e, 0x005f,
+	/* 8x */
+	0x0060
+};
+
+/* Gain = .5 + bit[7:0] / 16 */
+static u8 hv7131r_gain[] = {
+	0x08 /* 1x */, 0x0c /* 1.25x */, 0x10 /* 1.5x */, 0x14 /* 1.75x */,
+	0x18 /* 2x */, 0x1c /* 2.25x */, 0x20 /* 2.5x */, 0x24 /* 2.75x */,
+	0x28 /* 3x */, 0x2c /* 3.25x */, 0x30 /* 3.5x */, 0x34 /* 3.75x */,
+	0x38 /* 4x */, 0x3c /* 4.25x */, 0x40 /* 4.5x */, 0x44 /* 4.75x */,
+	0x48 /* 5x */, 0x4c /* 5.25x */, 0x50 /* 5.5x */, 0x54 /* 5.75x */,
+	0x58 /* 6x */, 0x5c /* 6.25x */, 0x60 /* 6.5x */, 0x64 /* 6.75x */,
+	0x68 /* 7x */, 0x6c /* 7.25x */, 0x70 /* 7.5x */, 0x74 /* 7.75x */,
+	0x78 /* 8x */
+};
+
+static u8 soi968_init[][2] = {
+	{0x12, 0x80}, {0x0c, 0x00}, {0x0f, 0x1f},
+	{0x11, 0x80}, {0x38, 0x52}, {0x1e, 0x00},
+	{0x33, 0x08}, {0x35, 0x8c}, {0x36, 0x0c},
+	{0x37, 0x04}, {0x45, 0x04}, {0x47, 0xff},
+	{0x3e, 0x00}, {0x3f, 0x00}, {0x3b, 0x20},
+	{0x3a, 0x96}, {0x3d, 0x0a}, {0x14, 0x8e},
+	{0x13, 0x8a}, {0x12, 0x40}, {0x17, 0x13},
+	{0x18, 0x63}, {0x19, 0x01}, {0x1a, 0x79},
+	{0x32, 0x24}, {0x03, 0x00}, {0x11, 0x40},
+	{0x2a, 0x10}, {0x2b, 0xe0}, {0x10, 0x32},
+	{0x00, 0x00}, {0x01, 0x80}, {0x02, 0x80},
+};
+
+static u8 ov7660_init[][2] = {
+	{0x0e, 0x80}, {0x0d, 0x08}, {0x0f, 0xc3},
+	{0x04, 0xc3}, {0x10, 0x40}, {0x11, 0x40},
+	{0x12, 0x05}, {0x13, 0xba}, {0x14, 0x2a},
+	{0x37, 0x0f}, {0x38, 0x02}, {0x39, 0x43},
+	{0x3a, 0x00}, {0x69, 0x90}, {0x2d, 0xf6},
+	{0x2e, 0x0b}, {0x01, 0x78}, {0x02, 0x50},
+};
+
+static u8 ov7670_init[][2] = {
+	{0x12, 0x80}, {0x11, 0x80}, {0x3a, 0x04}, {0x12, 0x01},
+	{0x32, 0xb6}, {0x03, 0x0a}, {0x0c, 0x00}, {0x3e, 0x00},
+	{0x70, 0x3a}, {0x71, 0x35}, {0x72, 0x11}, {0x73, 0xf0},
+	{0xa2, 0x02}, {0x13, 0xe0}, {0x00, 0x00}, {0x10, 0x00},
+	{0x0d, 0x40}, {0x14, 0x28}, {0xa5, 0x05}, {0xab, 0x07},
+	{0x24, 0x95}, {0x25, 0x33}, {0x26, 0xe3}, {0x9f, 0x75},
+	{0xa0, 0x65}, {0xa1, 0x0b}, {0xa6, 0xd8}, {0xa7, 0xd8},
+	{0xa8, 0xf0}, {0xa9, 0x90}, {0xaa, 0x94}, {0x13, 0xe5},
+	{0x0e, 0x61}, {0x0f, 0x4b}, {0x16, 0x02}, {0x1e, 0x27},
+	{0x21, 0x02}, {0x22, 0x91}, {0x29, 0x07}, {0x33, 0x0b},
+	{0x35, 0x0b}, {0x37, 0x1d}, {0x38, 0x71}, {0x39, 0x2a},
+	{0x3c, 0x78}, {0x4d, 0x40}, {0x4e, 0x20}, {0x69, 0x00},
+	{0x74, 0x19}, {0x8d, 0x4f}, {0x8e, 0x00}, {0x8f, 0x00},
+	{0x90, 0x00}, {0x91, 0x00}, {0x96, 0x00}, {0x9a, 0x80},
+	{0xb0, 0x84}, {0xb1, 0x0c}, {0xb2, 0x0e}, {0xb3, 0x82},
+	{0xb8, 0x0a}, {0x43, 0x0a}, {0x44, 0xf0}, {0x45, 0x20},
+	{0x46, 0x7d}, {0x47, 0x29}, {0x48, 0x4a}, {0x59, 0x8c},
+	{0x5a, 0xa5}, {0x5b, 0xde}, {0x5c, 0x96}, {0x5d, 0x66},
+	{0x5e, 0x10}, {0x6c, 0x0a}, {0x6d, 0x55}, {0x6e, 0x11},
+	{0x6f, 0x9e}, {0x6a, 0x40}, {0x01, 0x40}, {0x02, 0x40},
+	{0x13, 0xe7}, {0x4f, 0x6e}, {0x50, 0x70}, {0x51, 0x02},
+	{0x52, 0x1d}, {0x53, 0x56}, {0x54, 0x73}, {0x55, 0x0a},
+	{0x56, 0x55}, {0x57, 0x80}, {0x58, 0x9e}, {0x41, 0x08},
+	{0x3f, 0x02}, {0x75, 0x03}, {0x76, 0x63}, {0x4c, 0x04},
+	{0x77, 0x06}, {0x3d, 0x02}, {0x4b, 0x09}, {0xc9, 0x30},
+	{0x41, 0x08}, {0x56, 0x48}, {0x34, 0x11}, {0xa4, 0x88},
+	{0x96, 0x00}, {0x97, 0x30}, {0x98, 0x20}, {0x99, 0x30},
+	{0x9a, 0x84}, {0x9b, 0x29}, {0x9c, 0x03}, {0x9d, 0x99},
+	{0x9e, 0x7f}, {0x78, 0x04}, {0x79, 0x01}, {0xc8, 0xf0},
+	{0x79, 0x0f}, {0xc8, 0x00}, {0x79, 0x10}, {0xc8, 0x7e},
+	{0x79, 0x0a}, {0xc8, 0x80}, {0x79, 0x0b}, {0xc8, 0x01},
+	{0x79, 0x0c}, {0xc8, 0x0f}, {0x79, 0x0d}, {0xc8, 0x20},
+	{0x79, 0x09}, {0xc8, 0x80}, {0x79, 0x02}, {0xc8, 0xc0},
+	{0x79, 0x03}, {0xc8, 0x40}, {0x79, 0x05}, {0xc8, 0x30},
+	{0x79, 0x26}, {0x62, 0x20}, {0x63, 0x00}, {0x64, 0x06},
+	{0x65, 0x00}, {0x66, 0x05}, {0x94, 0x05}, {0x95, 0x0a},
+	{0x17, 0x13}, {0x18, 0x01}, {0x19, 0x02}, {0x1a, 0x7a},
+	{0x46, 0x59}, {0x47, 0x30}, {0x58, 0x9a}, {0x59, 0x84},
+	{0x5a, 0x91}, {0x5b, 0x57}, {0x5c, 0x75}, {0x5d, 0x6d},
+	{0x5e, 0x13}, {0x64, 0x07}, {0x94, 0x07}, {0x95, 0x0d},
+	{0xa6, 0xdf}, {0xa7, 0xdf}, {0x48, 0x4d}, {0x51, 0x00},
+	{0x6b, 0x0a}, {0x11, 0x80}, {0x2a, 0x00}, {0x2b, 0x00},
+	{0x92, 0x00}, {0x93, 0x00}, {0x55, 0x0a}, {0x56, 0x60},
+	{0x4f, 0x6e}, {0x50, 0x70}, {0x51, 0x00}, {0x52, 0x1d},
+	{0x53, 0x56}, {0x54, 0x73}, {0x58, 0x9a}, {0x4f, 0x6e},
+	{0x50, 0x70}, {0x51, 0x00}, {0x52, 0x1d}, {0x53, 0x56},
+	{0x54, 0x73}, {0x58, 0x9a}, {0x3f, 0x01}, {0x7b, 0x03},
+	{0x7c, 0x09}, {0x7d, 0x16}, {0x7e, 0x38}, {0x7f, 0x47},
+	{0x80, 0x53}, {0x81, 0x5e}, {0x82, 0x6a}, {0x83, 0x74},
+	{0x84, 0x80}, {0x85, 0x8c}, {0x86, 0x9b}, {0x87, 0xb2},
+	{0x88, 0xcc}, {0x89, 0xe5}, {0x7a, 0x24}, {0x3b, 0x00},
+	{0x9f, 0x76}, {0xa0, 0x65}, {0x13, 0xe2}, {0x6b, 0x0a},
+	{0x11, 0x80}, {0x2a, 0x00}, {0x2b, 0x00}, {0x92, 0x00},
+	{0x93, 0x00},
+};
+
+static u8 ov9650_init[][2] = {
+	{0x12, 0x80}, {0x00, 0x00}, {0x01, 0x78},
+	{0x02, 0x78}, {0x03, 0x36}, {0x04, 0x03},
+	{0x05, 0x00}, {0x06, 0x00}, {0x08, 0x00},
+	{0x09, 0x01}, {0x0c, 0x00}, {0x0d, 0x00},
+	{0x0e, 0xa0}, {0x0f, 0x52}, {0x10, 0x7c},
+	{0x11, 0x80}, {0x12, 0x45}, {0x13, 0xc2},
+	{0x14, 0x2e}, {0x15, 0x00}, {0x16, 0x07},
+	{0x17, 0x24}, {0x18, 0xc5}, {0x19, 0x00},
+	{0x1a, 0x3c}, {0x1b, 0x00}, {0x1e, 0x04},
+	{0x1f, 0x00}, {0x24, 0x78}, {0x25, 0x68},
+	{0x26, 0xd4}, {0x27, 0x80}, {0x28, 0x80},
+	{0x29, 0x30}, {0x2a, 0x00}, {0x2b, 0x00},
+	{0x2c, 0x80}, {0x2d, 0x00}, {0x2e, 0x00},
+	{0x2f, 0x00}, {0x30, 0x08}, {0x31, 0x30},
+	{0x32, 0x84}, {0x33, 0xe2}, {0x34, 0xbf},
+	{0x35, 0x81}, {0x36, 0xf9}, {0x37, 0x00},
+	{0x38, 0x93}, {0x39, 0x50}, {0x3a, 0x01},
+	{0x3b, 0x01}, {0x3c, 0x73}, {0x3d, 0x19},
+	{0x3e, 0x0b}, {0x3f, 0x80}, {0x40, 0xc1},
+	{0x41, 0x00}, {0x42, 0x08}, {0x67, 0x80},
+	{0x68, 0x80}, {0x69, 0x40}, {0x6a, 0x00},
+	{0x6b, 0x0a}, {0x8b, 0x06}, {0x8c, 0x20},
+	{0x8d, 0x00}, {0x8e, 0x00}, {0x8f, 0xdf},
+	{0x92, 0x00}, {0x93, 0x00}, {0x94, 0x88},
+	{0x95, 0x88}, {0x96, 0x04}, {0xa1, 0x00},
+	{0xa5, 0x80}, {0xa8, 0x80}, {0xa9, 0xb8},
+	{0xaa, 0x92}, {0xab, 0x0a},
+};
+
+static u8 ov9655_init[][2] = {
+	{0x12, 0x80}, {0x12, 0x01}, {0x0d, 0x00}, {0x0e, 0x61},
+	{0x11, 0x80}, {0x13, 0xba}, {0x14, 0x2e}, {0x16, 0x24},
+	{0x1e, 0x04}, {0x1e, 0x04}, {0x1e, 0x04}, {0x27, 0x08},
+	{0x28, 0x08}, {0x29, 0x15}, {0x2c, 0x08}, {0x32, 0xbf},
+	{0x34, 0x3d}, {0x35, 0x00}, {0x36, 0xf8}, {0x38, 0x12},
+	{0x39, 0x57}, {0x3a, 0x00}, {0x3b, 0xcc}, {0x3c, 0x0c},
+	{0x3d, 0x19}, {0x3e, 0x0c}, {0x3f, 0x01}, {0x41, 0x40},
+	{0x42, 0x80}, {0x45, 0x46}, {0x46, 0x62}, {0x47, 0x2a},
+	{0x48, 0x3c}, {0x4a, 0xf0}, {0x4b, 0xdc}, {0x4c, 0xdc},
+	{0x4d, 0xdc}, {0x4e, 0xdc}, {0x69, 0x02}, {0x6c, 0x04},
+	{0x6f, 0x9e}, {0x70, 0x05}, {0x71, 0x78}, {0x77, 0x02},
+	{0x8a, 0x23}, {0x8c, 0x0d}, {0x90, 0x7e}, {0x91, 0x7c},
+	{0x9f, 0x6e}, {0xa0, 0x6e}, {0xa5, 0x68}, {0xa6, 0x60},
+	{0xa8, 0xc1}, {0xa9, 0xfa}, {0xaa, 0x92}, {0xab, 0x04},
+	{0xac, 0x80}, {0xad, 0x80}, {0xae, 0x80}, {0xaf, 0x80},
+	{0xb2, 0xf2}, {0xb3, 0x20}, {0xb5, 0x00}, {0xb6, 0xaf},
+	{0xbb, 0xae}, {0xbc, 0x44}, {0xbd, 0x44}, {0xbe, 0x3b},
+	{0xbf, 0x3a}, {0xc0, 0xe2}, {0xc1, 0xc8}, {0xc2, 0x01},
+	{0xc4, 0x00}, {0xc6, 0x85}, {0xc7, 0x81}, {0xc9, 0xe0},
+	{0xca, 0xe8}, {0xcc, 0xd8}, {0xcd, 0x93}, {0x12, 0x61},
+	{0x36, 0xfa}, {0x8c, 0x8d}, {0xc0, 0xaa}, {0x69, 0x0a},
+	{0x03, 0x12}, {0x17, 0x14}, {0x18, 0x00}, {0x19, 0x01},
+	{0x1a, 0x3d}, {0x32, 0xbf}, {0x11, 0x80}, {0x2a, 0x10},
+	{0x2b, 0x0a}, {0x92, 0x00}, {0x93, 0x00}, {0x1e, 0x04},
+	{0x1e, 0x04}, {0x10, 0x7c}, {0x04, 0x03}, {0xa1, 0x00},
+	{0x2d, 0x00}, {0x2e, 0x00}, {0x00, 0x00}, {0x01, 0x80},
+	{0x02, 0x80}, {0x12, 0x61}, {0x36, 0xfa}, {0x8c, 0x8d},
+	{0xc0, 0xaa}, {0x69, 0x0a}, {0x03, 0x12}, {0x17, 0x14},
+	{0x18, 0x00}, {0x19, 0x01}, {0x1a, 0x3d}, {0x32, 0xbf},
+	{0x11, 0x80}, {0x2a, 0x10}, {0x2b, 0x0a}, {0x92, 0x00},
+	{0x93, 0x00}, {0x04, 0x01}, {0x10, 0x1f}, {0xa1, 0x00},
+	{0x00, 0x0a}, {0xa1, 0x00}, {0x10, 0x5d}, {0x04, 0x03},
+	{0x00, 0x01}, {0xa1, 0x00}, {0x10, 0x7c}, {0x04, 0x03},
+	{0x00, 0x03}, {0x00, 0x0a}, {0x00, 0x10}, {0x00, 0x13},
+};
+
+static u16 mt9v112_init[][2] = {
+	{0xf0, 0x0000}, {0x0d, 0x0021}, {0x0d, 0x0020},
+	{0x34, 0xc019}, {0x0a, 0x0011}, {0x0b, 0x000b},
+	{0x20, 0x0703}, {0x35, 0x2022}, {0xf0, 0x0001},
+	{0x05, 0x0000}, {0x06, 0x340c}, {0x3b, 0x042a},
+	{0x3c, 0x0400}, {0xf0, 0x0002}, {0x2e, 0x0c58},
+	{0x5b, 0x0001}, {0xc8, 0x9f0b}, {0xf0, 0x0001},
+	{0x9b, 0x5300}, {0xf0, 0x0000}, {0x2b, 0x0020},
+	{0x2c, 0x002a}, {0x2d, 0x0032}, {0x2e, 0x0020},
+	{0x09, 0x01dc}, {0x01, 0x000c}, {0x02, 0x0020},
+	{0x03, 0x01e0}, {0x04, 0x0280}, {0x06, 0x000c},
+	{0x05, 0x0098}, {0x20, 0x0703}, {0x09, 0x01f2},
+	{0x2b, 0x00a0}, {0x2c, 0x00a0}, {0x2d, 0x00a0},
+	{0x2e, 0x00a0}, {0x01, 0x000c}, {0x02, 0x0020},
+	{0x03, 0x01e0}, {0x04, 0x0280}, {0x06, 0x000c},
+	{0x05, 0x0098}, {0x09, 0x01c1}, {0x2b, 0x00ae},
+	{0x2c, 0x00ae}, {0x2d, 0x00ae}, {0x2e, 0x00ae},
+};
+
+static u16 mt9v111_init[][2] = {
+	{0x01, 0x0004}, {0x0d, 0x0001}, {0x0d, 0x0000},
+	{0x01, 0x0001}, {0x02, 0x0016}, {0x03, 0x01e1},
+	{0x04, 0x0281}, {0x05, 0x0004}, {0x07, 0x3002},
+	{0x21, 0x0000}, {0x25, 0x4024}, {0x26, 0xff03},
+	{0x27, 0xff10}, {0x2b, 0x7828}, {0x2c, 0xb43c},
+	{0x2d, 0xf0a0},	{0x2e, 0x0c64},	{0x2f, 0x0064},
+	{0x67, 0x4010},	{0x06, 0x301e},	{0x08, 0x0480},
+	{0x01, 0x0004},	{0x02, 0x0016}, {0x03, 0x01e6},
+	{0x04, 0x0286},	{0x05, 0x0004}, {0x06, 0x0000},
+	{0x07, 0x3002},	{0x08, 0x0008}, {0x0c, 0x0000},
+	{0x0d, 0x0000}, {0x0e, 0x0000}, {0x0f, 0x0000},
+	{0x10, 0x0000},	{0x11, 0x0000},	{0x12, 0x00b0},
+	{0x13, 0x007c},	{0x14, 0x0000}, {0x15, 0x0000},
+	{0x16, 0x0000}, {0x17, 0x0000},	{0x18, 0x0000},
+	{0x19, 0x0000},	{0x1a, 0x0000},	{0x1b, 0x0000},
+	{0x1c, 0x0000},	{0x1d, 0x0000},	{0x30, 0x0000},
+	{0x30, 0x0005},	{0x31, 0x0000},	{0x02, 0x0016},
+	{0x03, 0x01e1},	{0x04, 0x0281}, {0x05, 0x0004},
+	{0x06, 0x0000},	{0x07, 0x3002},	{0x06, 0x002d},
+	{0x05, 0x0004},	{0x09, 0x0064},	{0x2b, 0x00a0},
+	{0x2c, 0x00a0},	{0x2d, 0x00a0},	{0x2e, 0x00a0},
+	{0x02, 0x0016},	{0x03, 0x01e1},	{0x04, 0x0281},
+	{0x05, 0x0004},	{0x06, 0x002d},	{0x07, 0x3002},
+	{0x0e, 0x0008},	{0x06, 0x002d},	{0x05, 0x0004},
+};
+
+static u16 mt9v011_init[][2] = {
+	{0x07, 0x0002},	{0x0d, 0x0001},	{0x0d, 0x0000},
+	{0x01, 0x0008},	{0x02, 0x0016},	{0x03, 0x01e1},
+	{0x04, 0x0281},	{0x05, 0x0083},	{0x06, 0x0006},
+	{0x0d, 0x0002}, {0x0a, 0x0000},	{0x0b, 0x0000},
+	{0x0c, 0x0000},	{0x0d, 0x0000},	{0x0e, 0x0000},
+	{0x0f, 0x0000},	{0x10, 0x0000},	{0x11, 0x0000},
+	{0x12, 0x0000},	{0x13, 0x0000},	{0x14, 0x0000},
+	{0x15, 0x0000},	{0x16, 0x0000},	{0x17, 0x0000},
+	{0x18, 0x0000},	{0x19, 0x0000},	{0x1a, 0x0000},
+	{0x1b, 0x0000},	{0x1c, 0x0000},	{0x1d, 0x0000},
+	{0x32, 0x0000},	{0x20, 0x1101},	{0x21, 0x0000},
+	{0x22, 0x0000},	{0x23, 0x0000},	{0x24, 0x0000},
+	{0x25, 0x0000},	{0x26, 0x0000},	{0x27, 0x0024},
+	{0x2f, 0xf7b0},	{0x30, 0x0005},	{0x31, 0x0000},
+	{0x32, 0x0000},	{0x33, 0x0000},	{0x34, 0x0100},
+	{0x3d, 0x068f},	{0x40, 0x01e0},	{0x41, 0x00d1},
+	{0x44, 0x0082},	{0x5a, 0x0000},	{0x5b, 0x0000},
+	{0x5c, 0x0000},	{0x5d, 0x0000},	{0x5e, 0x0000},
+	{0x5f, 0xa31d},	{0x62, 0x0611},	{0x0a, 0x0000},
+	{0x06, 0x0029},	{0x05, 0x0009},	{0x20, 0x1101},
+	{0x20, 0x1101},	{0x09, 0x0064},	{0x07, 0x0003},
+	{0x2b, 0x0033},	{0x2c, 0x00a0},	{0x2d, 0x00a0},
+	{0x2e, 0x0033},	{0x07, 0x0002},	{0x06, 0x0000},
+	{0x06, 0x0029},	{0x05, 0x0009},
+};
+
+static u16 mt9m001_init[][2] = {
+	{0x0d, 0x0001}, {0x0d, 0x0000}, {0x01, 0x000e},
+	{0x02, 0x0014}, {0x03, 0x03c1}, {0x04, 0x0501},
+	{0x05, 0x0083}, {0x06, 0x0006}, {0x0d, 0x0002},
+	{0x0a, 0x0000}, {0x0c, 0x0000}, {0x11, 0x0000},
+	{0x1e, 0x8000}, {0x5f, 0x8904}, {0x60, 0x0000},
+	{0x61, 0x0000}, {0x62, 0x0498}, {0x63, 0x0000},
+	{0x64, 0x0000}, {0x20, 0x111d}, {0x06, 0x00f2},
+	{0x05, 0x0013}, {0x09, 0x10f2}, {0x07, 0x0003},
+	{0x2b, 0x002a}, {0x2d, 0x002a}, {0x2c, 0x002a},
+	{0x2e, 0x0029}, {0x07, 0x0002},
+};
+
+static u16 mt9m111_init[][2] = {
+	{0xf0, 0x0000}, {0x0d, 0x0008}, {0x0d, 0x0009},
+	{0x0d, 0x0008}, {0xf0, 0x0001}, {0x3a, 0x4300},
+	{0x9b, 0x4300}, {0xa1, 0x0280}, {0xa4, 0x0200},
+	{0x06, 0x308e}, {0xf0, 0x0000},
+};
+
+static u8 hv7131r_init[][2] = {
+	{0x02, 0x08}, {0x02, 0x00}, {0x01, 0x08},
+	{0x02, 0x00}, {0x20, 0x00}, {0x21, 0xd0},
+	{0x22, 0x00}, {0x23, 0x09}, {0x01, 0x08},
+	{0x01, 0x08}, {0x01, 0x08}, {0x25, 0x07},
+	{0x26, 0xc3}, {0x27, 0x50}, {0x30, 0x62},
+	{0x31, 0x10}, {0x32, 0x06}, {0x33, 0x10},
+	{0x20, 0x00}, {0x21, 0xd0}, {0x22, 0x00},
+	{0x23, 0x09}, {0x01, 0x08},
+};
+
+int reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length)
+{
+	struct usb_device *dev = gspca_dev->dev;
+	int result;
+	result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			0x00,
+			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+			reg,
+			0x00,
+			gspca_dev->usb_buf,
+			length,
+			500);
+	if (unlikely(result < 0 || result != length)) {
+		err("Read register failed 0x%02X", reg);
+		return -EIO;
+	}
+	return 0;
+}
+
+int reg_w(struct gspca_dev *gspca_dev, u16 reg, const u8 *buffer, int length)
+{
+	struct usb_device *dev = gspca_dev->dev;
+	int result;
+	memcpy(gspca_dev->usb_buf, buffer, length);
+	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			0x08,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+			reg,
+			0x00,
+			gspca_dev->usb_buf,
+			length,
+			500);
+	if (unlikely(result < 0 || result != length)) {
+		err("Write register failed index 0x%02X", reg);
+		return -EIO;
+	}
+	return 0;
+}
+
+int reg_w1(struct gspca_dev *gspca_dev, u16 reg, const u8 value)
+{
+	u8 data[1] = {value};
+	return reg_w(gspca_dev, reg, data, 1);
+}
+
+int i2c_w(struct gspca_dev *gspca_dev, const u8 *buffer)
+{
+	int i;
+	reg_w(gspca_dev, 0x10c0, buffer, 8);
+	for (i = 0; i < 5; i++) {
+		reg_r(gspca_dev, 0x10c0, 1);
+		if (gspca_dev->usb_buf[0] & 0x04) {
+			if (gspca_dev->usb_buf[0] & 0x08)
+				return -1;
+			return 0;
+		}
+		msleep(1);
+	}
+	return -1;
+}
+
+int i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	u8 row[8];
+
+	/*
+	 * from the point of view of the bridge, the length
+	 * includes the address
+	 */
+	row[0] = 0x81 | (2 << 4);
+	row[1] = sd->i2c_addr;
+	row[2] = reg;
+	row[3] = val;
+	row[4] = 0x00;
+	row[5] = 0x00;
+	row[6] = 0x00;
+	row[7] = 0x10;
+
+	return i2c_w(gspca_dev, row);
+}
+
+int i2c_w2(struct gspca_dev *gspca_dev, u8 reg, u16 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 row[8];
+
+	/*
+	 * from the point of view of the bridge, the length
+	 * includes the address
+	 */
+	row[0] = 0x81 | (3 << 4);
+	row[1] = sd->i2c_addr;
+	row[2] = reg;
+	row[3] = (val >> 8) & 0xff;
+	row[4] = val & 0xff;
+	row[5] = 0x00;
+	row[6] = 0x00;
+	row[7] = 0x10;
+
+	return i2c_w(gspca_dev, row);
+}
+
+int i2c_r1(struct gspca_dev *gspca_dev, u8 reg, u8 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 row[8];
+
+	row[0] = 0x81 | 0x10;
+	row[1] = sd->i2c_addr;
+	row[2] = reg;
+	row[3] = 0;
+	row[4] = 0;
+	row[5] = 0;
+	row[6] = 0;
+	row[7] = 0x10;
+	reg_w(gspca_dev, 0x10c0, row, 8);
+	msleep(1);
+	row[0] = 0x81 | (2 << 4) | 0x02;
+	row[2] = 0;
+	reg_w(gspca_dev, 0x10c0, row, 8);
+	msleep(1);
+	reg_r(gspca_dev, 0x10c2, 5);
+	*val = gspca_dev->usb_buf[3];
+	return 0;
+}
+
+int i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 row[8];
+
+	row[0] = 0x81 | 0x10;
+	row[1] = sd->i2c_addr;
+	row[2] = reg;
+	row[3] = 0;
+	row[4] = 0;
+	row[5] = 0;
+	row[6] = 0;
+	row[7] = 0x10;
+	reg_w(gspca_dev, 0x10c0, row, 8);
+	msleep(1);
+	row[0] = 0x81 | (3 << 4) | 0x02;
+	row[2] = 0;
+	reg_w(gspca_dev, 0x10c0, row, 8);
+	msleep(1);
+	reg_r(gspca_dev, 0x10c2, 5);
+	*val = (gspca_dev->usb_buf[2] << 8) | gspca_dev->usb_buf[3];
+	return 0;
+}
+
+static int ov9650_init_sensor(struct gspca_dev *gspca_dev)
+{
+	int i;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	for (i = 0; i < ARRAY_SIZE(ov9650_init); i++) {
+		if (i2c_w1(gspca_dev, ov9650_init[i][0],
+				ov9650_init[i][1]) < 0) {
+			err("OV9650 sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	sd->hstart = 1;
+	sd->vstart = 7;
+	return 0;
+}
+
+static int ov9655_init_sensor(struct gspca_dev *gspca_dev)
+{
+	int i;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	for (i = 0; i < ARRAY_SIZE(ov9655_init); i++) {
+		if (i2c_w1(gspca_dev, ov9655_init[i][0],
+				ov9655_init[i][1]) < 0) {
+			err("OV9655 sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	/* disable hflip and vflip */
+	gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+	sd->hstart = 0;
+	sd->vstart = 7;
+	return 0;
+}
+
+static int soi968_init_sensor(struct gspca_dev *gspca_dev)
+{
+	int i;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	for (i = 0; i < ARRAY_SIZE(soi968_init); i++) {
+		if (i2c_w1(gspca_dev, soi968_init[i][0],
+				soi968_init[i][1]) < 0) {
+			err("SOI968 sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	/* disable hflip and vflip */
+	gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+	sd->hstart = 60;
+	sd->vstart = 11;
+	return 0;
+}
+
+static int ov7660_init_sensor(struct gspca_dev *gspca_dev)
+{
+	int i;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	for (i = 0; i < ARRAY_SIZE(ov7660_init); i++) {
+		if (i2c_w1(gspca_dev, ov7660_init[i][0],
+				ov7660_init[i][1]) < 0) {
+			err("OV7660 sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	/* disable hflip and vflip */
+	gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+	sd->hstart = 1;
+	sd->vstart = 1;
+	return 0;
+}
+
+static int ov7670_init_sensor(struct gspca_dev *gspca_dev)
+{
+	int i;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	for (i = 0; i < ARRAY_SIZE(ov7670_init); i++) {
+		if (i2c_w1(gspca_dev, ov7670_init[i][0],
+				ov7670_init[i][1]) < 0) {
+			err("OV7670 sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	/* disable hflip and vflip */
+	gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+	sd->hstart = 0;
+	sd->vstart = 1;
+	return 0;
+}
+
+static int mt9v_init_sensor(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	u16 value;
+	int ret;
+
+	sd->i2c_addr = 0x5d;
+	ret = i2c_r2(gspca_dev, 0xff, &value);
+	if ((ret == 0) && (value == 0x8243)) {
+		for (i = 0; i < ARRAY_SIZE(mt9v011_init); i++) {
+			if (i2c_w2(gspca_dev, mt9v011_init[i][0],
+					mt9v011_init[i][1]) < 0) {
+				err("MT9V011 sensor initialization failed");
+				return -ENODEV;
+			}
+		}
+		sd->hstart = 2;
+		sd->vstart = 2;
+		sd->sensor = SENSOR_MT9V011;
+		info("MT9V011 sensor detected");
+		return 0;
+	}
+
+	sd->i2c_addr = 0x5c;
+	i2c_w2(gspca_dev, 0x01, 0x0004);
+	ret = i2c_r2(gspca_dev, 0xff, &value);
+	if ((ret == 0) && (value == 0x823a)) {
+		for (i = 0; i < ARRAY_SIZE(mt9v111_init); i++) {
+			if (i2c_w2(gspca_dev, mt9v111_init[i][0],
+					mt9v111_init[i][1]) < 0) {
+				err("MT9V111 sensor initialization failed");
+				return -ENODEV;
+			}
+		}
+		sd->hstart = 2;
+		sd->vstart = 2;
+		sd->sensor = SENSOR_MT9V111;
+		info("MT9V111 sensor detected");
+		return 0;
+	}
+
+	sd->i2c_addr = 0x5d;
+	ret = i2c_w2(gspca_dev, 0xf0, 0x0000);
+	if (ret < 0) {
+		sd->i2c_addr = 0x48;
+		i2c_w2(gspca_dev, 0xf0, 0x0000);
+	}
+	ret = i2c_r2(gspca_dev, 0x00, &value);
+	if ((ret == 0) && (value == 0x1229)) {
+		for (i = 0; i < ARRAY_SIZE(mt9v112_init); i++) {
+			if (i2c_w2(gspca_dev, mt9v112_init[i][0],
+					mt9v112_init[i][1]) < 0) {
+				err("MT9V112 sensor initialization failed");
+				return -ENODEV;
+			}
+		}
+		sd->hstart = 6;
+		sd->vstart = 2;
+		sd->sensor = SENSOR_MT9V112;
+		info("MT9V112 sensor detected");
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static int mt9m111_init_sensor(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	for (i = 0; i < ARRAY_SIZE(mt9m111_init); i++) {
+		if (i2c_w2(gspca_dev, mt9m111_init[i][0],
+				mt9m111_init[i][1]) < 0) {
+			err("MT9M111 sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	sd->hstart = 0;
+	sd->vstart = 2;
+	return 0;
+}
+
+static int mt9m001_init_sensor(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	for (i = 0; i < ARRAY_SIZE(mt9m001_init); i++) {
+		if (i2c_w2(gspca_dev, mt9m001_init[i][0],
+				mt9m001_init[i][1]) < 0) {
+			err("MT9M001 sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	/* disable hflip and vflip */
+	gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+	sd->hstart = 2;
+	sd->vstart = 2;
+	return 0;
+}
+
+static int hv7131r_init_sensor(struct gspca_dev *gspca_dev)
+{
+	int i;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	for (i = 0; i < ARRAY_SIZE(hv7131r_init); i++) {
+		if (i2c_w1(gspca_dev, hv7131r_init[i][0],
+				hv7131r_init[i][1]) < 0) {
+			err("HV7131R Sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	sd->hstart = 0;
+	sd->vstart = 1;
+	return 0;
+}
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+static int input_kthread(void *data)
+{
+	struct gspca_dev *gspca_dev = (struct gspca_dev *)data;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	DECLARE_WAIT_QUEUE_HEAD(wait);
+	set_freezable();
+	for (;;) {
+		if (kthread_should_stop())
+			break;
+
+		if (reg_r(gspca_dev, 0x1005, 1) < 0)
+			continue;
+
+		input_report_key(sd->input_dev,
+				 KEY_CAMERA,
+				 gspca_dev->usb_buf[0] & sd->input_gpio);
+		input_sync(sd->input_dev);
+
+		wait_event_freezable_timeout(wait,
+					     kthread_should_stop(),
+					     msecs_to_jiffies(100));
+	}
+	return 0;
+}
+
+
+static int sn9c20x_input_init(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	if (sd->input_gpio == 0)
+		return 0;
+
+	sd->input_dev = input_allocate_device();
+	if (!sd->input_dev)
+		return -ENOMEM;
+
+	sd->input_dev->name = "SN9C20X Webcam";
+
+	sd->input_dev->phys = kasprintf(GFP_KERNEL, "usb-%s-%s",
+					 gspca_dev->dev->bus->bus_name,
+					 gspca_dev->dev->devpath);
+
+	if (!sd->input_dev->phys)
+		return -ENOMEM;
+
+	usb_to_input_id(gspca_dev->dev, &sd->input_dev->id);
+	sd->input_dev->dev.parent = &gspca_dev->dev->dev;
+
+	set_bit(EV_KEY, sd->input_dev->evbit);
+	set_bit(KEY_CAMERA, sd->input_dev->keybit);
+
+	if (input_register_device(sd->input_dev))
+		return -EINVAL;
+
+	sd->input_task = kthread_run(input_kthread, gspca_dev, "sn9c20x/%d",
+				     gspca_dev->vdev.minor);
+
+	if (IS_ERR(sd->input_task))
+		return -EINVAL;
+
+	return 0;
+}
+
+static void sn9c20x_input_cleanup(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	if (sd->input_task != NULL && !IS_ERR(sd->input_task))
+		kthread_stop(sd->input_task);
+
+	if (sd->input_dev != NULL) {
+		input_unregister_device(sd->input_dev);
+		kfree(sd->input_dev->phys);
+		input_free_device(sd->input_dev);
+		sd->input_dev = NULL;
+	}
+}
+#endif
+
+static int set_cmatrix(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 hue_coord, hue_index = 180 + sd->hue;
+	u8 cmatrix[21];
+	memset(cmatrix, 0, 21);
+
+	cmatrix[2] = (sd->contrast * 0x25 / 0x100) + 0x26;
+	cmatrix[0] = 0x13 + (cmatrix[2] - 0x26) * 0x13 / 0x25;
+	cmatrix[4] = 0x07 + (cmatrix[2] - 0x26) * 0x07 / 0x25;
+	cmatrix[18] = sd->brightness - 0x80;
+
+	hue_coord = (hsv_red_x[hue_index] * sd->saturation) >> 8;
+	cmatrix[6] = (unsigned char)(hue_coord & 0xff);
+	cmatrix[7] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+	hue_coord = (hsv_red_y[hue_index] * sd->saturation) >> 8;
+	cmatrix[8] = (unsigned char)(hue_coord & 0xff);
+	cmatrix[9] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+	hue_coord = (hsv_green_x[hue_index] * sd->saturation) >> 8;
+	cmatrix[10] = (unsigned char)(hue_coord & 0xff);
+	cmatrix[11] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+	hue_coord = (hsv_green_y[hue_index] * sd->saturation) >> 8;
+	cmatrix[12] = (unsigned char)(hue_coord & 0xff);
+	cmatrix[13] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+	hue_coord = (hsv_blue_x[hue_index] * sd->saturation) >> 8;
+	cmatrix[14] = (unsigned char)(hue_coord & 0xff);
+	cmatrix[15] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+	hue_coord = (hsv_blue_y[hue_index] * sd->saturation) >> 8;
+	cmatrix[16] = (unsigned char)(hue_coord & 0xff);
+	cmatrix[17] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+	return reg_w(gspca_dev, 0x10e1, cmatrix, 21);
+}
+
+static int set_gamma(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 gamma[17];
+	u8 gval = sd->gamma * 0xb8 / 0x100;
+
+
+	gamma[0] = 0x0a;
+	gamma[1] = 0x13 + (gval * (0xcb - 0x13) / 0xb8);
+	gamma[2] = 0x25 + (gval * (0xee - 0x25) / 0xb8);
+	gamma[3] = 0x37 + (gval * (0xfa - 0x37) / 0xb8);
+	gamma[4] = 0x45 + (gval * (0xfc - 0x45) / 0xb8);
+	gamma[5] = 0x55 + (gval * (0xfb - 0x55) / 0xb8);
+	gamma[6] = 0x65 + (gval * (0xfc - 0x65) / 0xb8);
+	gamma[7] = 0x74 + (gval * (0xfd - 0x74) / 0xb8);
+	gamma[8] = 0x83 + (gval * (0xfe - 0x83) / 0xb8);
+	gamma[9] = 0x92 + (gval * (0xfc - 0x92) / 0xb8);
+	gamma[10] = 0xa1 + (gval * (0xfc - 0xa1) / 0xb8);
+	gamma[11] = 0xb0 + (gval * (0xfc - 0xb0) / 0xb8);
+	gamma[12] = 0xbf + (gval * (0xfb - 0xbf) / 0xb8);
+	gamma[13] = 0xce + (gval * (0xfb - 0xce) / 0xb8);
+	gamma[14] = 0xdf + (gval * (0xfd - 0xdf) / 0xb8);
+	gamma[15] = 0xea + (gval * (0xf9 - 0xea) / 0xb8);
+	gamma[16] = 0xf5;
+
+	return reg_w(gspca_dev, 0x1190, gamma, 17);
+}
+
+static int set_redblue(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	reg_w1(gspca_dev, 0x118c, sd->red);
+	reg_w1(gspca_dev, 0x118f, sd->blue);
+	return 0;
+}
+
+static int set_hvflip(struct gspca_dev *gspca_dev)
+{
+	u8 value, tslb;
+	u16 value2;
+	struct sd *sd = (struct sd *) gspca_dev;
+	switch (sd->sensor) {
+	case SENSOR_OV9650:
+		i2c_r1(gspca_dev, 0x1e, &value);
+		value &= ~0x30;
+		tslb = 0x01;
+		if (sd->hflip)
+			value |= 0x20;
+		if (sd->vflip) {
+			value |= 0x10;
+			tslb = 0x49;
+		}
+		i2c_w1(gspca_dev, 0x1e, value);
+		i2c_w1(gspca_dev, 0x3a, tslb);
+		break;
+	case SENSOR_MT9V111:
+	case SENSOR_MT9V011:
+		i2c_r2(gspca_dev, 0x20, &value2);
+		value2 &= ~0xc0a0;
+		if (sd->hflip)
+			value2 |= 0x8080;
+		if (sd->vflip)
+			value2 |= 0x4020;
+		i2c_w2(gspca_dev, 0x20, value2);
+		break;
+	case SENSOR_MT9M111:
+	case SENSOR_MT9V112:
+		i2c_r2(gspca_dev, 0x20, &value2);
+		value2 &= ~0x0003;
+		if (sd->hflip)
+			value2 |= 0x0002;
+		if (sd->vflip)
+			value2 |= 0x0001;
+		i2c_w2(gspca_dev, 0x20, value2);
+		break;
+	case SENSOR_HV7131R:
+		i2c_r1(gspca_dev, 0x01, &value);
+		value &= ~0x03;
+		if (sd->vflip)
+			value |= 0x01;
+		if (sd->hflip)
+			value |= 0x02;
+		i2c_w1(gspca_dev, 0x01, value);
+		break;
+	}
+	return 0;
+}
+
+static int set_exposure(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 exp[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e};
+	switch (sd->sensor) {
+	case SENSOR_OV7660:
+	case SENSOR_OV7670:
+	case SENSOR_SOI968:
+	case SENSOR_OV9655:
+	case SENSOR_OV9650:
+		exp[0] |= (3 << 4);
+		exp[2] = 0x2d;
+		exp[3] = sd->exposure & 0xff;
+		exp[4] = sd->exposure >> 8;
+		break;
+	case SENSOR_MT9M001:
+	case SENSOR_MT9M111:
+	case SENSOR_MT9V112:
+	case SENSOR_MT9V111:
+	case SENSOR_MT9V011:
+		exp[0] |= (3 << 4);
+		exp[2] = 0x09;
+		exp[3] = sd->exposure >> 8;
+		exp[4] = sd->exposure & 0xff;
+		break;
+	case SENSOR_HV7131R:
+		exp[0] |= (4 << 4);
+		exp[2] = 0x25;
+		exp[3] = ((sd->exposure * 0xffffff) / 0xffff) >> 16;
+		exp[4] = ((sd->exposure * 0xffffff) / 0xffff) >> 8;
+		exp[5] = ((sd->exposure * 0xffffff) / 0xffff) & 0xff;
+		break;
+	}
+	i2c_w(gspca_dev, exp);
+	return 0;
+}
+
+static int set_gain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 gain[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1d};
+	switch (sd->sensor) {
+	case SENSOR_OV7660:
+	case SENSOR_OV7670:
+	case SENSOR_SOI968:
+	case SENSOR_OV9655:
+	case SENSOR_OV9650:
+		gain[0] |= (2 << 4);
+		gain[3] = ov_gain[sd->gain];
+		break;
+	case SENSOR_MT9V011:
+	case SENSOR_MT9V111:
+		gain[0] |= (3 << 4);
+		gain[2] = 0x35;
+		gain[3] = micron1_gain[sd->gain] >> 8;
+		gain[4] = micron1_gain[sd->gain] & 0xff;
+		break;
+	case SENSOR_MT9V112:
+	case SENSOR_MT9M111:
+		gain[0] |= (3 << 4);
+		gain[2] = 0x2f;
+		gain[3] = micron1_gain[sd->gain] >> 8;
+		gain[4] = micron1_gain[sd->gain] & 0xff;
+		break;
+	case SENSOR_MT9M001:
+		gain[0] |= (3 << 4);
+		gain[2] = 0x2f;
+		gain[3] = micron2_gain[sd->gain] >> 8;
+		gain[4] = micron2_gain[sd->gain] & 0xff;
+		break;
+	case SENSOR_HV7131R:
+		gain[0] |= (2 << 4);
+		gain[2] = 0x30;
+		gain[3] = hv7131r_gain[sd->gain];
+		break;
+	}
+	i2c_w(gspca_dev, gain);
+	return 0;
+}
+
+static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->brightness = val;
+	if (gspca_dev->streaming)
+		return set_cmatrix(gspca_dev);
+	return 0;
+}
+
+static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->brightness;
+	return 0;
+}
+
+
+static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->contrast = val;
+	if (gspca_dev->streaming)
+		return set_cmatrix(gspca_dev);
+	return 0;
+}
+
+static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->contrast;
+	return 0;
+}
+
+static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->saturation = val;
+	if (gspca_dev->streaming)
+		return set_cmatrix(gspca_dev);
+	return 0;
+}
+
+static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->saturation;
+	return 0;
+}
+
+static int sd_sethue(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->hue = val;
+	if (gspca_dev->streaming)
+		return set_cmatrix(gspca_dev);
+	return 0;
+}
+
+static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->hue;
+	return 0;
+}
+
+static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->gamma = val;
+	if (gspca_dev->streaming)
+		return set_gamma(gspca_dev);
+	return 0;
+}
+
+static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->gamma;
+	return 0;
+}
+
+static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->red = val;
+	if (gspca_dev->streaming)
+		return set_redblue(gspca_dev);
+	return 0;
+}
+
+static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->red;
+	return 0;
+}
+
+static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->blue = val;
+	if (gspca_dev->streaming)
+		return set_redblue(gspca_dev);
+	return 0;
+}
+
+static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->blue;
+	return 0;
+}
+
+static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->hflip = val;
+	if (gspca_dev->streaming)
+		return set_hvflip(gspca_dev);
+	return 0;
+}
+
+static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->hflip;
+	return 0;
+}
+
+static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->vflip = val;
+	if (gspca_dev->streaming)
+		return set_hvflip(gspca_dev);
+	return 0;
+}
+
+static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->vflip;
+	return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->exposure = val;
+	if (gspca_dev->streaming)
+		return set_exposure(gspca_dev);
+	return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->exposure;
+	return 0;
+}
+
+static int sd_setgain(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->gain = val;
+	if (gspca_dev->streaming)
+		return set_gain(gspca_dev);
+	return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->gain;
+	return 0;
+}
+
+static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	sd->auto_exposure = val;
+	return 0;
+}
+
+static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->auto_exposure;
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int sd_dbg_g_register(struct gspca_dev *gspca_dev,
+			struct v4l2_dbg_register *reg)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	switch (reg->match.type) {
+	case V4L2_CHIP_MATCH_HOST:
+		if (reg->match.addr != 0)
+			return -EINVAL;
+		if (reg->reg < 0x1000 || reg->reg > 0x11ff)
+			return -EINVAL;
+		if (reg_r(gspca_dev, reg->reg, 1) < 0)
+			return -EINVAL;
+		reg->val = gspca_dev->usb_buf[0];
+		return 0;
+	case V4L2_CHIP_MATCH_I2C_ADDR:
+		if (reg->match.addr != sd->i2c_addr)
+			return -EINVAL;
+		if (sd->sensor >= SENSOR_MT9V011 &&
+		    sd->sensor <= SENSOR_MT9M111) {
+			if (i2c_r2(gspca_dev, reg->reg, (u16 *)&reg->val) < 0)
+				return -EINVAL;
+		} else {
+			if (i2c_r1(gspca_dev, reg->reg, (u8 *)&reg->val) < 0)
+				return -EINVAL;
+		}
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
+			struct v4l2_dbg_register *reg)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	switch (reg->match.type) {
+	case V4L2_CHIP_MATCH_HOST:
+		if (reg->match.addr != 0)
+			return -EINVAL;
+		if (reg->reg < 0x1000 || reg->reg > 0x11ff)
+			return -EINVAL;
+		if (reg_w1(gspca_dev, reg->reg, reg->val) < 0)
+			return -EINVAL;
+		return 0;
+	case V4L2_CHIP_MATCH_I2C_ADDR:
+		if (reg->match.addr != sd->i2c_addr)
+			return -EINVAL;
+		if (sd->sensor >= SENSOR_MT9V011 &&
+		    sd->sensor <= SENSOR_MT9M111) {
+			if (i2c_w2(gspca_dev, reg->reg, reg->val) < 0)
+				return -EINVAL;
+		} else {
+			if (i2c_w1(gspca_dev, reg->reg, reg->val) < 0)
+				return -EINVAL;
+		}
+		return 0;
+	}
+	return -EINVAL;
+}
+#endif
+
+static int sd_chip_ident(struct gspca_dev *gspca_dev,
+			struct v4l2_dbg_chip_ident *chip)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	switch (chip->match.type) {
+	case V4L2_CHIP_MATCH_HOST:
+		if (chip->match.addr != 0)
+			return -EINVAL;
+		chip->revision = 0;
+		chip->ident = V4L2_IDENT_SN9C20X;
+		return 0;
+	case V4L2_CHIP_MATCH_I2C_ADDR:
+		if (chip->match.addr != sd->i2c_addr)
+			return -EINVAL;
+		chip->revision = 0;
+		chip->ident = i2c_ident[sd->sensor];
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int sd_config(struct gspca_dev *gspca_dev,
+			const struct usb_device_id *id)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct cam *cam;
+
+	cam = &gspca_dev->cam;
+
+	sd->sensor = (id->driver_info >> 8) & 0xff;
+	sd->i2c_addr = id->driver_info & 0xff;
+
+	switch (sd->sensor) {
+	case SENSOR_OV9650:
+		cam->cam_mode = sxga_mode;
+		cam->nmodes = ARRAY_SIZE(sxga_mode);
+		break;
+	default:
+		cam->cam_mode = vga_mode;
+		cam->nmodes = ARRAY_SIZE(vga_mode);
+	}
+
+	sd->old_step = 0;
+	sd->older_step = 0;
+	sd->exposure_step = 16;
+
+	sd->brightness = BRIGHTNESS_DEFAULT;
+	sd->contrast = CONTRAST_DEFAULT;
+	sd->saturation = SATURATION_DEFAULT;
+	sd->hue = HUE_DEFAULT;
+	sd->gamma = GAMMA_DEFAULT;
+	sd->red = RED_DEFAULT;
+	sd->blue = BLUE_DEFAULT;
+
+	sd->hflip = HFLIP_DEFAULT;
+	sd->vflip = VFLIP_DEFAULT;
+	sd->exposure = EXPOSURE_DEFAULT;
+	sd->gain = GAIN_DEFAULT;
+	sd->auto_exposure = AUTO_EXPOSURE_DEFAULT;
+
+	sd->quality = 95;
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+	sd->input_gpio = (id->driver_info >> 16) & 0xff;
+	if (sn9c20x_input_init(gspca_dev) < 0)
+		return -ENODEV;
+#endif
+	return 0;
+}
+
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	u8 value;
+	u8 i2c_init[9] =
+		{0x80, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03};
+
+	for (i = 0; i < ARRAY_SIZE(bridge_init); i++) {
+		value = bridge_init[i][1];
+		if (reg_w(gspca_dev, bridge_init[i][0], &value, 1) < 0) {
+			err("Device initialization failed");
+			return -ENODEV;
+		}
+	}
+
+	if (reg_w(gspca_dev, 0x10c0, i2c_init, 9) < 0) {
+		err("Device initialization failed");
+		return -ENODEV;
+	}
+
+	switch (sd->sensor) {
+	case SENSOR_OV9650:
+		if (ov9650_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("OV9650 sensor detected");
+		break;
+	case SENSOR_OV9655:
+		if (ov9655_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("OV9655 sensor detected");
+		break;
+	case SENSOR_SOI968:
+		if (soi968_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("SOI968 sensor detected");
+		break;
+	case SENSOR_OV7660:
+		if (ov7660_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("OV7660 sensor detected");
+		break;
+	case SENSOR_OV7670:
+		if (ov7670_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("OV7670 sensor detected");
+		break;
+	case SENSOR_MT9VPRB:
+		if (mt9v_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		break;
+	case SENSOR_MT9M111:
+		if (mt9m111_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("MT9M111 sensor detected");
+		break;
+	case SENSOR_MT9M001:
+		if (mt9m001_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("MT9M001 sensor detected");
+		break;
+	case SENSOR_HV7131R:
+		if (hv7131r_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("HV7131R sensor detected");
+		break;
+	default:
+		info("Unsupported Sensor");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void configure_sensor_output(struct gspca_dev *gspca_dev, int mode)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 value;
+	switch (sd->sensor) {
+	case SENSOR_OV9650:
+		if (mode & MODE_SXGA) {
+			i2c_w1(gspca_dev, 0x17, 0x1b);
+			i2c_w1(gspca_dev, 0x18, 0xbc);
+			i2c_w1(gspca_dev, 0x19, 0x01);
+			i2c_w1(gspca_dev, 0x1a, 0x82);
+			i2c_r1(gspca_dev, 0x12, &value);
+			i2c_w1(gspca_dev, 0x12, value & 0x07);
+		} else {
+			i2c_w1(gspca_dev, 0x17, 0x24);
+			i2c_w1(gspca_dev, 0x18, 0xc5);
+			i2c_w1(gspca_dev, 0x19, 0x00);
+			i2c_w1(gspca_dev, 0x1a, 0x3c);
+			i2c_r1(gspca_dev, 0x12, &value);
+			i2c_w1(gspca_dev, 0x12, (value & 0x7) | 0x40);
+		}
+		break;
+	}
+}
+
+#define HW_WIN(mode, hstart, vstart) \
+((const u8 []){hstart & 0xff, hstart >> 8, \
+vstart & 0xff, vstart >> 8, \
+(mode & MODE_SXGA ? 1280 >> 4 : 640 >> 4), \
+(mode & MODE_SXGA ? 1024 >> 3 : 480 >> 3)})
+
+#define CLR_WIN(width, height) \
+((const u8 [])\
+{0, width >> 2, 0, height >> 1,\
+((width >> 10) & 0x01) | ((height >> 8) & 0x6)})
+
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+	int width = gspca_dev->width;
+	int height = gspca_dev->height;
+	u8 fmt, scale = 0;
+
+	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (sd->jpeg_hdr == NULL)
+		return -ENOMEM;
+
+	jpeg_define(sd->jpeg_hdr, height, width,
+			0x21);
+	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
+
+	if (mode & MODE_RAW)
+		fmt = 0x2d;
+	else if (mode & MODE_JPEG)
+		fmt = 0x2c;
+	else
+		fmt = 0x2f;
+
+	switch (mode & 0x0f) {
+	case 3:
+		scale = 0xc0;
+		info("Set 1280x1024");
+		break;
+	case 2:
+		scale = 0x80;
+		info("Set 640x480");
+		break;
+	case 1:
+		scale = 0x90;
+		info("Set 320x240");
+		break;
+	case 0:
+		scale = 0xa0;
+		info("Set 160x120");
+		break;
+	}
+
+	configure_sensor_output(gspca_dev, mode);
+	reg_w(gspca_dev, 0x1100, sd->jpeg_hdr + JPEG_QT0_OFFSET, 64);
+	reg_w(gspca_dev, 0x1140, sd->jpeg_hdr + JPEG_QT1_OFFSET, 64);
+	reg_w(gspca_dev, 0x10fb, CLR_WIN(width, height), 5);
+	reg_w(gspca_dev, 0x1180, HW_WIN(mode, sd->hstart, sd->vstart), 6);
+	reg_w1(gspca_dev, 0x1189, scale);
+	reg_w1(gspca_dev, 0x10e0, fmt);
+
+	set_cmatrix(gspca_dev);
+	set_gamma(gspca_dev);
+	set_redblue(gspca_dev);
+	set_gain(gspca_dev);
+	set_exposure(gspca_dev);
+	set_hvflip(gspca_dev);
+
+	reg_r(gspca_dev, 0x1061, 1);
+	reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] | 0x02);
+	return 0;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+	reg_r(gspca_dev, 0x1061, 1);
+	reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] & ~0x02);
+}
+
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	kfree(sd->jpeg_hdr);
+}
+
+static void do_autoexposure(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int avg_lum, new_exp;
+
+	if (!sd->auto_exposure)
+		return;
+
+	avg_lum = atomic_read(&sd->avg_lum);
+
+	/*
+	 * some hardcoded values are present
+	 * like those for maximal/minimal exposure
+	 * and exposure steps
+	 */
+	if (avg_lum < MIN_AVG_LUM) {
+		if (sd->exposure > 0x1770)
+			return;
+
+		new_exp = sd->exposure + sd->exposure_step;
+		if (new_exp > 0x1770)
+			new_exp = 0x1770;
+		if (new_exp < 0x10)
+			new_exp = 0x10;
+		sd->exposure = new_exp;
+		set_exposure(gspca_dev);
+
+		sd->older_step = sd->old_step;
+		sd->old_step = 1;
+
+		if (sd->old_step ^ sd->older_step)
+			sd->exposure_step /= 2;
+		else
+			sd->exposure_step += 2;
+	}
+	if (avg_lum > MAX_AVG_LUM) {
+		if (sd->exposure < 0x10)
+			return;
+		new_exp = sd->exposure - sd->exposure_step;
+		if (new_exp > 0x1700)
+			new_exp = 0x1770;
+		if (new_exp < 0x10)
+			new_exp = 0x10;
+		sd->exposure = new_exp;
+		set_exposure(gspca_dev);
+		sd->older_step = sd->old_step;
+		sd->old_step = 0;
+
+		if (sd->old_step ^ sd->older_step)
+			sd->exposure_step /= 2;
+		else
+			sd->exposure_step += 2;
+	}
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+			struct gspca_frame *frame,	/* target */
+			u8 *data,			/* isoc packet */
+			int len)			/* iso packet length */
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int avg_lum;
+	static unsigned char frame_header[] =
+		{0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96};
+	if (len == 64 && memcmp(data, frame_header, 6) == 0) {
+		avg_lum = ((data[35] >> 2) & 3) |
+			   (data[20] << 2) |
+			   (data[19] << 10);
+		avg_lum += ((data[35] >> 4) & 3) |
+			    (data[22] << 2) |
+			    (data[21] << 10);
+		avg_lum += ((data[35] >> 6) & 3) |
+			    (data[24] << 2) |
+			    (data[23] << 10);
+		avg_lum += (data[36] & 3) |
+			   (data[26] << 2) |
+			   (data[25] << 10);
+		avg_lum += ((data[36] >> 2) & 3) |
+			    (data[28] << 2) |
+			    (data[27] << 10);
+		avg_lum += ((data[36] >> 4) & 3) |
+			    (data[30] << 2) |
+			    (data[29] << 10);
+		avg_lum += ((data[36] >> 6) & 3) |
+			    (data[32] << 2) |
+			    (data[31] << 10);
+		avg_lum += ((data[44] >> 4) & 3) |
+			    (data[34] << 2) |
+			    (data[33] << 10);
+		avg_lum >>= 9;
+		atomic_set(&sd->avg_lum, avg_lum);
+		gspca_frame_add(gspca_dev, LAST_PACKET,
+				frame, data, len);
+		return;
+	}
+	if (gspca_dev->last_packet_type == LAST_PACKET) {
+		if (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv
+				& MODE_JPEG) {
+			gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+				sd->jpeg_hdr, JPEG_HDR_SZ);
+			gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+				data, len);
+		} else {
+			gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+				data, len);
+		}
+	} else {
+		gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+	}
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+	.name = MODULE_NAME,
+	.ctrls = sd_ctrls,
+	.nctrls = ARRAY_SIZE(sd_ctrls),
+	.config = sd_config,
+	.init = sd_init,
+	.start = sd_start,
+	.stopN = sd_stopN,
+	.stop0 = sd_stop0,
+	.pkt_scan = sd_pkt_scan,
+	.dq_callback = do_autoexposure,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.set_register = sd_dbg_s_register,
+	.get_register = sd_dbg_g_register,
+#endif
+	.get_chip_ident = sd_chip_ident,
+};
+
+#define SN9C20X(sensor, i2c_addr, button_mask) \
+	.driver_info =  (button_mask << 16) \
+			| (SENSOR_ ## sensor << 8) \
+			| (i2c_addr)
+
+static const __devinitdata struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x0c45, 0x6240), SN9C20X(MT9M001, 0x5d, 0)},
+	{USB_DEVICE(0x0c45, 0x6242), SN9C20X(MT9M111, 0x5d, 0)},
+	{USB_DEVICE(0x0c45, 0x6248), SN9C20X(OV9655, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x624e), SN9C20X(SOI968, 0x30, 0x10)},
+	{USB_DEVICE(0x0c45, 0x624f), SN9C20X(OV9650, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x6251), SN9C20X(OV9650, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x6253), SN9C20X(OV9650, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x6260), SN9C20X(OV7670, 0x21, 0)},
+	{USB_DEVICE(0x0c45, 0x6270), SN9C20X(MT9VPRB, 0x00, 0)},
+	{USB_DEVICE(0x0c45, 0x627b), SN9C20X(OV7660, 0x21, 0)},
+	{USB_DEVICE(0x0c45, 0x627c), SN9C20X(HV7131R, 0x11, 0)},
+	{USB_DEVICE(0x0c45, 0x627f), SN9C20X(OV9650, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x6280), SN9C20X(MT9M001, 0x5d, 0)},
+	{USB_DEVICE(0x0c45, 0x6282), SN9C20X(MT9M111, 0x5d, 0)},
+	{USB_DEVICE(0x0c45, 0x6288), SN9C20X(OV9655, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x628e), SN9C20X(SOI968, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x628f), SN9C20X(OV9650, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x62a0), SN9C20X(OV7670, 0x21, 0)},
+	{USB_DEVICE(0x0c45, 0x62b0), SN9C20X(MT9VPRB, 0x00, 0)},
+	{USB_DEVICE(0x0c45, 0x62b3), SN9C20X(OV9655, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x62bb), SN9C20X(OV7660, 0x21, 0)},
+	{USB_DEVICE(0x0c45, 0x62bc), SN9C20X(HV7131R, 0x11, 0)},
+	{USB_DEVICE(0x045e, 0x00f4), SN9C20X(OV9650, 0x30, 0)},
+	{USB_DEVICE(0x145f, 0x013d), SN9C20X(OV7660, 0x21, 0)},
+	{USB_DEVICE(0x0458, 0x7029), SN9C20X(HV7131R, 0x11, 0)},
+	{USB_DEVICE(0xa168, 0x0610), SN9C20X(HV7131R, 0x11, 0)},
+	{USB_DEVICE(0xa168, 0x0611), SN9C20X(HV7131R, 0x11, 0)},
+	{USB_DEVICE(0xa168, 0x0613), SN9C20X(HV7131R, 0x11, 0)},
+	{USB_DEVICE(0xa168, 0x0618), SN9C20X(HV7131R, 0x11, 0)},
+	{USB_DEVICE(0xa168, 0x0614), SN9C20X(MT9M111, 0x5d, 0)},
+	{USB_DEVICE(0xa168, 0x0615), SN9C20X(MT9M111, 0x5d, 0)},
+	{USB_DEVICE(0xa168, 0x0617), SN9C20X(MT9M111, 0x5d, 0)},
+	{}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+		    const struct usb_device_id *id)
+{
+	return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+				THIS_MODULE);
+}
+
+static void sd_disconnect(struct usb_interface *intf)
+{
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+	struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+	sn9c20x_input_cleanup(gspca_dev);
+#endif
+
+	gspca_disconnect(intf);
+}
+
+static struct usb_driver sd_driver = {
+	.name = MODULE_NAME,
+	.id_table = device_table,
+	.probe = sd_probe,
+	.disconnect = sd_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+	.reset_resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+	int ret;
+	ret = usb_register(&sd_driver);
+	if (ret < 0)
+		return ret;
+	info("registered");
+	return 0;
+}
+static void __exit sd_mod_exit(void)
+{
+	usb_deregister(&sd_driver);
+	info("deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 0d02f41fa7d..d6332ab8066 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -1634,6 +1634,8 @@ static void setfreq(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	if (gspca_dev->ctrl_dis & (1 << FREQ_IDX))
+		return;
 	if (sd->sensor == SENSOR_OV7660) {
 		switch (sd->freq) {
 		case 0: /* Banding filter disabled */
@@ -1735,6 +1737,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (!sd->jpeg_hdr)
+		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x21);		/* JPEG 422 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 8806b2ff82b..fab7ef85a6c 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -670,6 +670,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (!sd->jpeg_hdr)
+		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x22);		/* JPEG 411 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c
index f25be20cf1a..47628964801 100644
--- a/drivers/media/video/gspca/stk014.c
+++ b/drivers/media/video/gspca/stk014.c
@@ -333,6 +333,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (!sd->jpeg_hdr)
+		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x22);		/* JPEG 411 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h
index 9df7137fe67..992ce530f13 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.h
@@ -36,10 +36,6 @@
 
 #define STV_ISOC_ENDPOINT_ADDR		0x81
 
-#ifndef V4L2_PIX_FMT_SGRBG8
-#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G')
-#endif
-
 #define STV_REG23 			0x0423
 
 /* Control registers of the STV0600 ASIC */
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index 3039ec208f3..e5024c8496e 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -64,7 +64,7 @@ static struct v4l2_pix_format hdcs1x00_mode[] = {
 	{
 		HDCS_1X00_DEF_WIDTH,
 		HDCS_1X00_DEF_HEIGHT,
-		V4L2_PIX_FMT_SBGGR8,
+		V4L2_PIX_FMT_SGRBG8,
 		V4L2_FIELD_NONE,
 		.sizeimage =
 			HDCS_1X00_DEF_WIDTH * HDCS_1X00_DEF_HEIGHT,
@@ -80,7 +80,7 @@ static struct v4l2_pix_format hdcs1020_mode[] = {
 	{
 		HDCS_1020_DEF_WIDTH,
 		HDCS_1020_DEF_HEIGHT,
-		V4L2_PIX_FMT_SBGGR8,
+		V4L2_PIX_FMT_SGRBG8,
 		V4L2_FIELD_NONE,
 		.sizeimage =
 			HDCS_1020_DEF_WIDTH * HDCS_1020_DEF_HEIGHT,
@@ -131,9 +131,11 @@ static int hdcs_reg_write_seq(struct sd *sd, u8 reg, u8 *vals, u8 len)
 		     (reg + len > 0xff)))
 		return -EINVAL;
 
-	for (i = 0; i < len; i++, reg++) {
-		regs[2*i] = reg;
-		regs[2*i+1] = vals[i];
+	for (i = 0; i < len; i++) {
+		regs[2 * i] = reg;
+		regs[2 * i + 1] = vals[i];
+		/* All addresses are shifted left one bit as bit 0 toggles r/w */
+		reg += 2;
 	}
 
 	return stv06xx_write_sensor_bytes(sd, regs, len);
@@ -174,7 +176,9 @@ static int hdcs_set_state(struct sd *sd, enum hdcs_power_state state)
 	}
 
 	ret = stv06xx_write_sensor(sd, HDCS_REG_CONTROL(sd), val);
-	if (ret < 0)
+
+	/* Update the state if the write succeeded */
+	if (!ret)
 		hdcs->state = state;
 
 	return ret;
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index 9623f294bda..5127bbf9dd2 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -973,6 +973,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (!sd->jpeg_hdr)
+		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x22);		/* JPEG 411 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 08422d315e6..3d2756f7874 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -7243,6 +7243,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (!sd->jpeg_hdr)
+		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x21);		/* JPEG 422 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index ccd47f57f42..d678765cbba 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -1220,6 +1220,8 @@ static const struct video_device hdpvr_video_template = {
 		V4L2_STD_PAL_G | V4L2_STD_PAL_H | V4L2_STD_PAL_I |
 		V4L2_STD_PAL_D | V4L2_STD_PAL_M | V4L2_STD_PAL_N |
 		V4L2_STD_PAL_60,
+	.current_norm 		= V4L2_STD_NTSC | V4L2_STD_PAL_M |
+		V4L2_STD_PAL_60,
 };
 
 int hdpvr_register_videodev(struct hdpvr_device *dev, struct device *parent,
diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c
index a3b77ed3f08..4a9c8ce0ecb 100644
--- a/drivers/media/video/ivtv/ivtv-controls.c
+++ b/drivers/media/video/ivtv/ivtv-controls.c
@@ -17,6 +17,7 @@
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/kernel.h>
 
 #include "ivtv-driver.h"
 #include "ivtv-cards.h"
@@ -281,7 +282,7 @@ int ivtv_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
 		idx = p.audio_properties & 0x03;
 		/* The audio clock of the digitizer must match the codec sample
 		   rate otherwise you get some very strange effects. */
-		if (idx < sizeof(freqs))
+		if (idx < ARRAY_SIZE(freqs))
 			ivtv_call_all(itv, audio, s_clock_freq, freqs[idx]);
 		return err;
 	}
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
new file mode 100644
index 00000000000..cc85f77a570
--- /dev/null
+++ b/drivers/media/video/mt9v011.c
@@ -0,0 +1,634 @@
+/*
+ * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor
+ *
+ * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
+ * This code is placed under the terms of the GNU General Public License v2
+ */
+
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <linux/delay.h>
+#include <asm/div64.h>
+#include <media/v4l2-device.h>
+#include "mt9v011.h"
+#include <media/v4l2-i2c-drv.h>
+#include <media/v4l2-chip-ident.h>
+
+MODULE_DESCRIPTION("Micron mt9v011 sensor driver");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
+
+
+static int debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0-2)");
+
+/* supported controls */
+static struct v4l2_queryctrl mt9v011_qctrl[] = {
+	{
+		.id = V4L2_CID_GAIN,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Gain",
+		.minimum = 0,
+		.maximum = (1 << 10) - 1,
+		.step = 1,
+		.default_value = 0x0020,
+		.flags = 0,
+	}, {
+		.id = V4L2_CID_RED_BALANCE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Red Balance",
+		.minimum = -1 << 9,
+		.maximum = (1 << 9) - 1,
+		.step = 1,
+		.default_value = 0,
+		.flags = 0,
+	}, {
+		.id = V4L2_CID_BLUE_BALANCE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Blue Balance",
+		.minimum = -1 << 9,
+		.maximum = (1 << 9) - 1,
+		.step = 1,
+		.default_value = 0,
+		.flags = 0,
+	}, {
+		.id      = V4L2_CID_HFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Mirror",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+		.default_value = 0,
+		.flags = 0,
+	}, {
+		.id      = V4L2_CID_VFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Vflip",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+		.default_value = 0,
+		.flags = 0,
+	}, {
+	}
+};
+
+struct mt9v011 {
+	struct v4l2_subdev sd;
+	unsigned width, height;
+	unsigned xtal;
+	unsigned hflip:1;
+	unsigned vflip:1;
+
+	u16 global_gain, red_bal, blue_bal;
+};
+
+static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct mt9v011, sd);
+}
+
+static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr)
+{
+	struct i2c_client *c = v4l2_get_subdevdata(sd);
+	__be16 buffer;
+	int rc, val;
+
+	rc = i2c_master_send(c, &addr, 1);
+	if (rc != 1)
+		v4l2_dbg(0, debug, sd,
+			 "i2c i/o error: rc == %d (should be 1)\n", rc);
+
+	msleep(10);
+
+	rc = i2c_master_recv(c, (char *)&buffer, 2);
+	if (rc != 2)
+		v4l2_dbg(0, debug, sd,
+			 "i2c i/o error: rc == %d (should be 2)\n", rc);
+
+	val = be16_to_cpu(buffer);
+
+	v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val);
+
+	return val;
+}
+
+static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr,
+				 u16 value)
+{
+	struct i2c_client *c = v4l2_get_subdevdata(sd);
+	unsigned char buffer[3];
+	int rc;
+
+	buffer[0] = addr;
+	buffer[1] = value >> 8;
+	buffer[2] = value & 0xff;
+
+	v4l2_dbg(2, debug, sd,
+		 "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value);
+	rc = i2c_master_send(c, buffer, 3);
+	if (rc != 3)
+		v4l2_dbg(0, debug, sd,
+			 "i2c i/o error: rc == %d (should be 3)\n", rc);
+}
+
+
+struct i2c_reg_value {
+	unsigned char reg;
+	u16           value;
+};
+
+/*
+ * Values used at the original driver
+ * Some values are marked as Reserved at the datasheet
+ */
+static const struct i2c_reg_value mt9v011_init_default[] = {
+		{ R0D_MT9V011_RESET, 0x0001 },
+		{ R0D_MT9V011_RESET, 0x0000 },
+
+		{ R0C_MT9V011_SHUTTER_DELAY, 0x0000 },
+		{ R09_MT9V011_SHUTTER_WIDTH, 0x1fc },
+
+		{ R0A_MT9V011_CLK_SPEED, 0x0000 },
+		{ R1E_MT9V011_DIGITAL_ZOOM,  0x0000 },
+
+		{ R07_MT9V011_OUT_CTRL, 0x0002 },	/* chip enable */
+};
+
+static void set_balance(struct v4l2_subdev *sd)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	u16 green1_gain, green2_gain, blue_gain, red_gain;
+
+	green1_gain = core->global_gain;
+	green2_gain = core->global_gain;
+
+	blue_gain = core->global_gain +
+		    core->global_gain * core->blue_bal / (1 << 9);
+
+	red_gain = core->global_gain +
+		   core->global_gain * core->blue_bal / (1 << 9);
+
+	mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain);
+	mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN,  green1_gain);
+	mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain);
+	mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
+}
+
+static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	unsigned height, width, hblank, vblank, speed;
+	unsigned row_time, t_time;
+	u64 frames_per_ms;
+	unsigned tmp;
+
+	height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
+	width = mt9v011_read(sd, R04_MT9V011_WIDTH);
+	hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
+	vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
+	speed = mt9v011_read(sd, R0A_MT9V011_CLK_SPEED);
+
+	row_time = (width + 113 + hblank) * (speed + 2);
+	t_time = row_time * (height + vblank + 1);
+
+	frames_per_ms = core->xtal * 1000l;
+	do_div(frames_per_ms, t_time);
+	tmp = frames_per_ms;
+
+	v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n",
+		tmp / 1000, tmp % 1000, t_time);
+
+	if (numerator && denominator) {
+		*numerator = 1000;
+		*denominator = (u32)frames_per_ms;
+	}
+}
+
+static u16 calc_speed(struct v4l2_subdev *sd, u32 numerator, u32 denominator)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	unsigned height, width, hblank, vblank;
+	unsigned row_time, line_time;
+	u64 t_time, speed;
+
+	/* Avoid bogus calculus */
+	if (!numerator || !denominator)
+		return 0;
+
+	height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
+	width = mt9v011_read(sd, R04_MT9V011_WIDTH);
+	hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
+	vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
+
+	row_time = width + 113 + hblank;
+	line_time = height + vblank + 1;
+
+	t_time = core->xtal * ((u64)numerator);
+	/* round to the closest value */
+	t_time += denominator / 2;
+	do_div(t_time, denominator);
+
+	speed = t_time;
+	do_div(speed, row_time * line_time);
+
+	/* Avoid having a negative value for speed */
+	if (speed < 2)
+		speed = 0;
+	else
+		speed -= 2;
+
+	/* Avoid speed overflow */
+	if (speed > 15)
+		return 15;
+
+	return (u16)speed;
+}
+
+static void set_res(struct v4l2_subdev *sd)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	unsigned vstart, hstart;
+
+	/*
+	 * The mt9v011 doesn't have scaling. So, in order to select the desired
+	 * resolution, we're cropping at the middle of the sensor.
+	 * hblank and vblank should be adjusted, in order to warrant that
+	 * we'll preserve the line timings for 30 fps, no matter what resolution
+	 * is selected.
+	 * NOTE: datasheet says that width (and height) should be filled with
+	 * width-1. However, this doesn't work, since one pixel per line will
+	 * be missing.
+	 */
+
+	hstart = 14 + (640 - core->width) / 2;
+	mt9v011_write(sd, R02_MT9V011_COLSTART, hstart);
+	mt9v011_write(sd, R04_MT9V011_WIDTH, core->width);
+	mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width);
+
+	vstart = 8 + (480 - core->height) / 2;
+	mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart);
+	mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height);
+	mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height);
+
+	calc_fps(sd, NULL, NULL);
+};
+
+static void set_read_mode(struct v4l2_subdev *sd)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	unsigned mode = 0x1000;
+
+	if (core->hflip)
+		mode |= 0x4000;
+
+	if (core->vflip)
+		mode |= 0x8000;
+
+	mt9v011_write(sd, R20_MT9V011_READ_MODE, mode);
+}
+
+static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++)
+		mt9v011_write(sd, mt9v011_init_default[i].reg,
+			       mt9v011_init_default[i].value);
+
+	set_balance(sd);
+	set_res(sd);
+	set_read_mode(sd);
+
+	return 0;
+};
+
+static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+
+	v4l2_dbg(1, debug, sd, "g_ctrl called\n");
+
+	switch (ctrl->id) {
+	case V4L2_CID_GAIN:
+		ctrl->value = core->global_gain;
+		return 0;
+	case V4L2_CID_RED_BALANCE:
+		ctrl->value = core->red_bal;
+		return 0;
+	case V4L2_CID_BLUE_BALANCE:
+		ctrl->value = core->blue_bal;
+		return 0;
+	case V4L2_CID_HFLIP:
+		ctrl->value = core->hflip ? 1 : 0;
+		return 0;
+	case V4L2_CID_VFLIP:
+		ctrl->value = core->vflip ? 1 : 0;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int mt9v011_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+	int i;
+
+	v4l2_dbg(1, debug, sd, "queryctrl called\n");
+
+	for (i = 0; i < ARRAY_SIZE(mt9v011_qctrl); i++)
+		if (qc->id && qc->id == mt9v011_qctrl[i].id) {
+			memcpy(qc, &(mt9v011_qctrl[i]),
+			       sizeof(*qc));
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+
+static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	u8 i, n;
+	n = ARRAY_SIZE(mt9v011_qctrl);
+
+	for (i = 0; i < n; i++) {
+		if (ctrl->id != mt9v011_qctrl[i].id)
+			continue;
+		if (ctrl->value < mt9v011_qctrl[i].minimum ||
+		    ctrl->value > mt9v011_qctrl[i].maximum)
+			return -ERANGE;
+		v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n",
+					ctrl->id, ctrl->value);
+		break;
+	}
+
+	switch (ctrl->id) {
+	case V4L2_CID_GAIN:
+		core->global_gain = ctrl->value;
+		break;
+	case V4L2_CID_RED_BALANCE:
+		core->red_bal = ctrl->value;
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		core->blue_bal = ctrl->value;
+		break;
+	case V4L2_CID_HFLIP:
+		core->hflip = ctrl->value;
+		set_read_mode(sd);
+		return 0;
+	case V4L2_CID_VFLIP:
+		core->vflip = ctrl->value;
+		set_read_mode(sd);
+		return 0;
+	default:
+		return -EINVAL;
+	}
+
+	set_balance(sd);
+
+	return 0;
+}
+
+static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt)
+{
+	if (fmt->index > 0)
+		return -EINVAL;
+
+	fmt->flags = 0;
+	strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG");
+	fmt->pixelformat = V4L2_PIX_FMT_SGRBG8;
+
+	return 0;
+}
+
+static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+	if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8)
+		return -EINVAL;
+
+	v4l_bound_align_image(&pix->width, 48, 639, 1,
+			      &pix->height, 32, 480, 1, 0);
+
+	return 0;
+}
+
+static int mt9v011_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
+{
+	struct v4l2_captureparm *cp = &parms->parm.capture;
+
+	if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	memset(cp, 0, sizeof(struct v4l2_captureparm));
+	cp->capability = V4L2_CAP_TIMEPERFRAME;
+	calc_fps(sd,
+		 &cp->timeperframe.numerator,
+		 &cp->timeperframe.denominator);
+
+	return 0;
+}
+
+static int mt9v011_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
+{
+	struct v4l2_captureparm *cp = &parms->parm.capture;
+	struct v4l2_fract *tpf = &cp->timeperframe;
+	u16 speed;
+
+	if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	if (cp->extendedmode != 0)
+		return -EINVAL;
+
+	speed = calc_speed(sd, tpf->numerator, tpf->denominator);
+
+	mt9v011_write(sd, R0A_MT9V011_CLK_SPEED, speed);
+	v4l2_dbg(1, debug, sd, "Setting speed to %d\n", speed);
+
+	/* Recalculate and update fps info */
+	calc_fps(sd, &tpf->numerator, &tpf->denominator);
+
+	return 0;
+}
+
+static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+	struct mt9v011 *core = to_mt9v011(sd);
+	int rc;
+
+	rc = mt9v011_try_fmt(sd, fmt);
+	if (rc < 0)
+		return -EINVAL;
+
+	core->width = pix->width;
+	core->height = pix->height;
+
+	set_res(sd);
+
+	return 0;
+}
+
+static int mt9v011_s_config(struct v4l2_subdev *sd, int dumb, void *data)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	unsigned *xtal = data;
+
+	v4l2_dbg(1, debug, sd, "s_config called\n");
+
+	if (xtal) {
+		core->xtal = *xtal;
+		v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n",
+			 *xtal / 1000000, (*xtal / 1000) % 1000);
+	}
+
+	return 0;
+}
+
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int mt9v011_g_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (!v4l2_chip_match_i2c_client(client, &reg->match))
+		return -EINVAL;
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	reg->val = mt9v011_read(sd, reg->reg & 0xff);
+	reg->size = 2;
+
+	return 0;
+}
+
+static int mt9v011_s_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (!v4l2_chip_match_i2c_client(client, &reg->match))
+		return -EINVAL;
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff);
+
+	return 0;
+}
+#endif
+
+static int mt9v011_g_chip_ident(struct v4l2_subdev *sd,
+				struct v4l2_dbg_chip_ident *chip)
+{
+	u16 version;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
+
+	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011,
+					  version);
+}
+
+static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
+	.queryctrl = mt9v011_queryctrl,
+	.g_ctrl = mt9v011_g_ctrl,
+	.s_ctrl = mt9v011_s_ctrl,
+	.reset = mt9v011_reset,
+	.s_config = mt9v011_s_config,
+	.g_chip_ident = mt9v011_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register = mt9v011_g_register,
+	.s_register = mt9v011_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_video_ops mt9v011_video_ops = {
+	.enum_fmt = mt9v011_enum_fmt,
+	.try_fmt = mt9v011_try_fmt,
+	.s_fmt = mt9v011_s_fmt,
+	.g_parm = mt9v011_g_parm,
+	.s_parm = mt9v011_s_parm,
+};
+
+static const struct v4l2_subdev_ops mt9v011_ops = {
+	.core  = &mt9v011_core_ops,
+	.video = &mt9v011_video_ops,
+};
+
+
+/****************************************************************************
+			I2C Client & Driver
+ ****************************************************************************/
+
+static int mt9v011_probe(struct i2c_client *c,
+			 const struct i2c_device_id *id)
+{
+	u16 version;
+	struct mt9v011 *core;
+	struct v4l2_subdev *sd;
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(c->adapter,
+	     I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+		return -EIO;
+
+	core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL);
+	if (!core)
+		return -ENOMEM;
+
+	sd = &core->sd;
+	v4l2_i2c_subdev_init(sd, c, &mt9v011_ops);
+
+	/* Check if the sensor is really a MT9V011 */
+	version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
+	if ((version != MT9V011_VERSION) &&
+	    (version != MT9V011_REV_B_VERSION)) {
+		v4l2_info(sd, "*** unknown micron chip detected (0x%04x).\n",
+			  version);
+		kfree(core);
+		return -EINVAL;
+	}
+
+	core->global_gain = 0x0024;
+	core->width  = 640;
+	core->height = 480;
+	core->xtal = 27000000;	/* Hz */
+
+	v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n",
+		 c->addr << 1, c->adapter->name, version);
+
+	return 0;
+}
+
+static int mt9v011_remove(struct i2c_client *c)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(c);
+
+	v4l2_dbg(1, debug, sd,
+		"mt9v011.c: removing mt9v011 adapter on address 0x%x\n",
+		c->addr << 1);
+
+	v4l2_device_unregister_subdev(sd);
+	kfree(to_mt9v011(sd));
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct i2c_device_id mt9v011_id[] = {
+	{ "mt9v011", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mt9v011_id);
+
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+	.name = "mt9v011",
+	.probe = mt9v011_probe,
+	.remove = mt9v011_remove,
+	.id_table = mt9v011_id,
+};
diff --git a/drivers/media/video/mt9v011.h b/drivers/media/video/mt9v011.h
new file mode 100644
index 00000000000..3350fd6083c
--- /dev/null
+++ b/drivers/media/video/mt9v011.h
@@ -0,0 +1,36 @@
+/*
+ * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor
+ *
+ * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
+ * This code is placed under the terms of the GNU General Public License v2
+ */
+
+#ifndef MT9V011_H_
+#define MT9V011_H_
+
+#define R00_MT9V011_CHIP_VERSION	0x00
+#define R01_MT9V011_ROWSTART		0x01
+#define R02_MT9V011_COLSTART		0x02
+#define R03_MT9V011_HEIGHT		0x03
+#define R04_MT9V011_WIDTH		0x04
+#define R05_MT9V011_HBLANK		0x05
+#define R06_MT9V011_VBLANK		0x06
+#define R07_MT9V011_OUT_CTRL		0x07
+#define R09_MT9V011_SHUTTER_WIDTH	0x09
+#define R0A_MT9V011_CLK_SPEED		0x0a
+#define R0B_MT9V011_RESTART		0x0b
+#define R0C_MT9V011_SHUTTER_DELAY	0x0c
+#define R0D_MT9V011_RESET		0x0d
+#define R1E_MT9V011_DIGITAL_ZOOM	0x1e
+#define R20_MT9V011_READ_MODE		0x20
+#define R2B_MT9V011_GREEN_1_GAIN	0x2b
+#define R2C_MT9V011_BLUE_GAIN		0x2c
+#define R2D_MT9V011_RED_GAIN		0x2d
+#define R2E_MT9V011_GREEN_2_GAIN	0x2e
+#define R35_MT9V011_GLOBAL_GAIN		0x35
+#define RF1_MT9V011_CHIP_ENABLE		0xf1
+
+#define MT9V011_VERSION			0x8232
+#define MT9V011_REV_B_VERSION		0x8243
+
+#endif
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 2d075205bdf..736c31d2319 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -234,6 +234,7 @@ static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
 	return ret;
 }
 
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
 static void mx1_videobuf_queue(struct videobuf_queue *vq,
 						struct videobuf_buffer *vb)
 {
@@ -241,13 +242,10 @@ static void mx1_videobuf_queue(struct videobuf_queue *vq,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
 	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
-	unsigned long flags;
 
 	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
-	spin_lock_irqsave(&pcdev->lock, flags);
-
 	list_add_tail(&vb->queue, &pcdev->capture);
 
 	vb->state = VIDEOBUF_ACTIVE;
@@ -264,8 +262,6 @@ static void mx1_videobuf_queue(struct videobuf_queue *vq,
 			__raw_writel(temp, pcdev->base + CSICR1);
 		}
 	}
-
-	spin_unlock_irqrestore(&pcdev->lock, flags);
 }
 
 static void mx1_videobuf_release(struct videobuf_queue *vq,
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index e605c076ed8..9770cb7932c 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -332,7 +332,10 @@ static enum pixel_fmt fourcc_to_ipu_pix(__u32 fourcc)
 	}
 }
 
-/* Called with .vb_lock held */
+/*
+ * Called with .vb_lock mutex held and
+ * under spinlock_irqsave(&mx3_cam->lock, ...)
+ */
 static void mx3_videobuf_queue(struct videobuf_queue *vq,
 			       struct videobuf_buffer *vb)
 {
@@ -346,7 +349,8 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq,
 	struct idmac_video_param *video = &ichan->params.video;
 	const struct soc_camera_data_format *data_fmt = icd->current_fmt;
 	dma_cookie_t cookie;
-	unsigned long flags;
+
+	BUG_ON(!irqs_disabled());
 
 	/* This is the configuration of one sg-element */
 	video->out_pixel_fmt	= fourcc_to_ipu_pix(data_fmt->fourcc);
@@ -359,8 +363,6 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq,
 	memset((void *)vb->baddr, 0xaa, vb->bsize);
 #endif
 
-	spin_lock_irqsave(&mx3_cam->lock, flags);
-
 	list_add_tail(&vb->queue, &mx3_cam->capture);
 
 	if (!mx3_cam->active) {
@@ -370,24 +372,23 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq,
 		vb->state = VIDEOBUF_QUEUED;
 	}
 
-	spin_unlock_irqrestore(&mx3_cam->lock, flags);
+	spin_unlock_irq(&mx3_cam->lock);
 
 	cookie = txd->tx_submit(txd);
 	dev_dbg(&icd->dev, "Submitted cookie %d DMA 0x%08x\n", cookie, sg_dma_address(&buf->sg));
+
+	spin_lock_irq(&mx3_cam->lock);
+
 	if (cookie >= 0)
 		return;
 
 	/* Submit error */
 	vb->state = VIDEOBUF_PREPARED;
 
-	spin_lock_irqsave(&mx3_cam->lock, flags);
-
 	list_del_init(&vb->queue);
 
 	if (mx3_cam->active == buf)
 		mx3_cam->active = NULL;
-
-	spin_unlock_irqrestore(&mx3_cam->lock, flags);
 }
 
 /* Called with .vb_lock held */
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index db25c3034c1..8d17cf61330 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -62,6 +62,7 @@
 #include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #ifdef CONFIG_USB_PWC_INPUT_EVDEV
 #include <linux/usb/input.h>
 #endif
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index 0be6f814f53..0b658dee05a 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -29,7 +29,6 @@
 #include <linux/usb.h>
 #include <linux/spinlock.h>
 #include <linux/wait.h>
-#include <linux/smp_lock.h>
 #include <linux/version.h>
 #include <linux/mutex.h>
 #include <linux/mm.h>
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 46e0d8ad880..016bb45ba0c 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -612,6 +612,7 @@ static void pxa_camera_stop_capture(struct pxa_camera_dev *pcdev)
 	dev_dbg(pcdev->soc_host.dev, "%s\n", __func__);
 }
 
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
 static void pxa_videobuf_queue(struct videobuf_queue *vq,
 			       struct videobuf_buffer *vb)
 {
@@ -619,13 +620,10 @@ static void pxa_videobuf_queue(struct videobuf_queue *vq,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
-	unsigned long flags;
 
 	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d active=%p\n", __func__,
 		vb, vb->baddr, vb->bsize, pcdev->active);
 
-	spin_lock_irqsave(&pcdev->lock, flags);
-
 	list_add_tail(&vb->queue, &pcdev->capture);
 
 	vb->state = VIDEOBUF_ACTIVE;
@@ -633,8 +631,6 @@ static void pxa_videobuf_queue(struct videobuf_queue *vq,
 
 	if (!pcdev->active)
 		pxa_camera_start_capture(pcdev);
-
-	spin_unlock_irqrestore(&pcdev->lock, flags);
 }
 
 static void pxa_videobuf_release(struct videobuf_queue *vq,
@@ -1579,6 +1575,7 @@ static int __devinit pxa_camera_probe(struct platform_device *pdev)
 		pcdev->mclk = 20000000;
 	}
 
+	pcdev->soc_host.dev = &pdev->dev;
 	pcdev->mclk_divisor = mclk_get_divisor(pcdev);
 
 	INIT_LIST_HEAD(&pcdev->capture);
@@ -1644,7 +1641,6 @@ static int __devinit pxa_camera_probe(struct platform_device *pdev)
 	pcdev->soc_host.drv_name	= PXA_CAM_DRV_NAME;
 	pcdev->soc_host.ops		= &pxa_soc_camera_host_ops;
 	pcdev->soc_host.priv		= pcdev;
-	pcdev->soc_host.dev		= &pdev->dev;
 	pcdev->soc_host.nr		= pdev->id;
 
 	err = soc_camera_host_register(&pcdev->soc_host);
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 6be845ccc7d..9e3262c0ba3 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -48,6 +48,7 @@
 #include <linux/videodev2.h>
 #include <linux/version.h>
 #include <linux/mm.h>
+#include <linux/smp_lock.h>
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c
index 155804b061e..b624a4c01fd 100644
--- a/drivers/media/video/saa5246a.c
+++ b/drivers/media/video/saa5246a.c
@@ -43,7 +43,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/videotext.h>
 #include <linux/videodev2.h>
diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c
index 271d6e931b7..12835fb82c9 100644
--- a/drivers/media/video/saa5249.c
+++ b/drivers/media/video/saa5249.c
@@ -46,7 +46,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/videotext.h>
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 06861b782b9..6eebe3ef97d 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3331,8 +3331,8 @@ struct saa7134_board saa7134_boards[] = {
 			.gpio = 0x0200100,
 		},
 	},
-	[SAA7134_BOARD_HAUPPAUGE_HVR1120] = {
-		.name           = "Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid",
+	[SAA7134_BOARD_HAUPPAUGE_HVR1150] = {
+		.name           = "Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid",
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_PHILIPS_TDA8290,
 		.radio_type     = UNSET,
@@ -3363,8 +3363,8 @@ struct saa7134_board saa7134_boards[] = {
 			.gpio = 0x0800100, /* GPIO 23 HI for FM */
 		},
 	},
-	[SAA7134_BOARD_HAUPPAUGE_HVR1110R3] = {
-		.name           = "Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid",
+	[SAA7134_BOARD_HAUPPAUGE_HVR1120] = {
+		.name           = "Hauppauge WinTV-HVR1120 DVB-T/Hybrid",
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_PHILIPS_TDA8290,
 		.radio_type     = UNSET,
@@ -5862,31 +5862,31 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x0070,
 		.subdevice    = 0x6706,
-		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1120,
+		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1150,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x0070,
 		.subdevice    = 0x6707,
-		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
+		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1120,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x0070,
 		.subdevice    = 0x6708,
-		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1120,
+		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1150,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x0070,
 		.subdevice    = 0x6709,
-		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
+		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1120,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x0070,
 		.subdevice    = 0x670a,
-		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
+		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1120,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
@@ -6363,8 +6363,8 @@ static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev,
 	switch (command) {
 	case TDA18271_CALLBACK_CMD_AGC_ENABLE: /* 0 */
 		switch (dev->board) {
+		case SAA7134_BOARD_HAUPPAUGE_HVR1150:
 		case SAA7134_BOARD_HAUPPAUGE_HVR1120:
-		case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
 			ret = saa7134_tda18271_hvr11x0_toggle_agc(dev, arg);
 			break;
 		default:
@@ -6384,8 +6384,8 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev,
 	int ret;
 
 	switch (dev->board) {
+	case SAA7134_BOARD_HAUPPAUGE_HVR1150:
 	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
-	case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
 		/* tda8290 + tda18271 */
 		ret = saa7134_tda8290_18271_callback(dev, command, arg);
 		break;
@@ -6427,7 +6427,7 @@ static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data)
 	switch (tv.model) {
 	case 67019: /* WinTV-HVR1110 (Retail, IR Blaster, hybrid, FM, SVid/Comp, 3.5mm audio in) */
 	case 67109: /* WinTV-HVR1000 (Retail, IR Receive, analog, no FM, SVid/Comp, 3.5mm audio in) */
-	case 67201: /* WinTV-HVR1120 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
+	case 67201: /* WinTV-HVR1150 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
 	case 67301: /* WinTV-HVR1000 (Retail, IR Receive, analog, no FM, SVid/Comp, 3.5mm audio in) */
 	case 67209: /* WinTV-HVR1110 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
 	case 67559: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
@@ -6435,7 +6435,7 @@ static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data)
 	case 67579: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM) */
 	case 67589: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM, SVid/Comp, RCA aud) */
 	case 67599: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM, SVid/Comp, RCA aud) */
-	case 67651: /* WinTV-HVR1120 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
+	case 67651: /* WinTV-HVR1150 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
 	case 67659: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
 		break;
 	default:
@@ -6625,8 +6625,8 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 
 		saa_writeb (SAA7134_PRODUCTION_TEST_MODE, 0x00);
 		break;
+	case SAA7134_BOARD_HAUPPAUGE_HVR1150:
 	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
-	case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
 		/* GPIO 26 high for digital, low for analog */
 		saa7134_set_gpio(dev, 26, 0);
 		msleep(1);
@@ -6891,8 +6891,8 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 		       dev->name, saa7134_boards[dev->board].name);
 	       }
 	       break;
+	case SAA7134_BOARD_HAUPPAUGE_HVR1150:
 	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
-	case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
 		hauppauge_eeprom(dev, dev->eedata+0x80);
 		break;
 	case SAA7134_BOARD_HAUPPAUGE_HVR1110:
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 31930f26ffc..98f3efd1e94 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -1119,7 +1119,7 @@ static int dvb_init(struct saa7134_dev *dev)
 					 &tda827x_cfg_2) < 0)
 			goto dettach_frontend;
 		break;
-	case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
+	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
 		fe0->dvb.frontend = dvb_attach(tda10048_attach,
 					       &hcw_tda10048_config,
 					       &dev->i2c_adap);
@@ -1147,7 +1147,7 @@ static int dvb_init(struct saa7134_dev *dev)
 					 &tda827x_cfg_1) < 0)
 			goto dettach_frontend;
 		break;
-	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
+	case SAA7134_BOARD_HAUPPAUGE_HVR1150:
 		fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
 					       &hcw_lgdt3305_config,
 					       &dev->i2c_adap);
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index add1757f893..296788c3bf0 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/delay.h>
 
 #include "saa7134-reg.h"
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 82268848f26..fb564f14887 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -278,8 +278,8 @@ struct saa7134_format {
 #define SAA7134_BOARD_ASUSTeK_TIGER         152
 #define SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG 153
 #define SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS 154
-#define SAA7134_BOARD_HAUPPAUGE_HVR1120     155
-#define SAA7134_BOARD_HAUPPAUGE_HVR1110R3   156
+#define SAA7134_BOARD_HAUPPAUGE_HVR1150     155
+#define SAA7134_BOARD_HAUPPAUGE_HVR1120   156
 #define SAA7134_BOARD_AVERMEDIA_STUDIO_507UA 157
 #define SAA7134_BOARD_AVERMEDIA_CARDBUS_501 158
 #define SAA7134_BOARD_BEHOLD_505RDS         159
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
index c8f05297d0f..85ffc2cba03 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/media/video/se401.c
@@ -31,6 +31,7 @@ static const char version[] = "0.24";
 #include <linux/init.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/pagemap.h>
 #include <linux/usb.h>
 #include "se401.h"
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 0db88a53d92..e86878deea7 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -282,27 +282,24 @@ out:
 	return ret;
 }
 
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
 static void sh_mobile_ceu_videobuf_queue(struct videobuf_queue *vq,
 					 struct videobuf_buffer *vb)
 {
 	struct soc_camera_device *icd = vq->priv_data;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-	unsigned long flags;
 
 	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	vb->state = VIDEOBUF_QUEUED;
-	spin_lock_irqsave(&pcdev->lock, flags);
 	list_add_tail(&vb->queue, &pcdev->capture);
 
 	if (!pcdev->active) {
 		pcdev->active = vb;
 		sh_mobile_ceu_capture(pcdev);
 	}
-
-	spin_unlock_irqrestore(&pcdev->lock, flags);
 }
 
 static void sh_mobile_ceu_videobuf_release(struct videobuf_queue *vq,
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 16f595d4337..9f5ae816785 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -237,11 +237,11 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd)
 		return -ENOMEM;
 
 	icd->num_user_formats = fmts;
-	fmts = 0;
 
 	dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts);
 
 	/* Second pass - actually fill data formats */
+	fmts = 0;
 	for (i = 0; i < icd->num_formats; i++)
 		if (!ici->ops->get_formats) {
 			icd->user_formats[i].host_fmt = icd->formats + i;
@@ -877,8 +877,11 @@ static int soc_camera_probe(struct device *dev)
 			(unsigned short)~0;
 
 		ret = soc_camera_init_user_formats(icd);
-		if (ret < 0)
+		if (ret < 0) {
+			if (icd->ops->remove)
+				icd->ops->remove(icd);
 			goto eiufmt;
+		}
 
 		icd->height	= DEFAULT_HEIGHT;
 		icd->width	= DEFAULT_WIDTH;
@@ -902,8 +905,10 @@ static int soc_camera_remove(struct device *dev)
 {
 	struct soc_camera_device *icd = to_soc_camera_dev(dev);
 
+	mutex_lock(&icd->video_lock);
 	if (icd->ops->remove)
 		icd->ops->remove(icd);
+	mutex_unlock(&icd->video_lock);
 
 	soc_camera_free_user_formats(icd);
 
@@ -1145,6 +1150,7 @@ evidallocd:
 }
 EXPORT_SYMBOL(soc_camera_video_start);
 
+/* Called from client .remove() methods with .video_lock held */
 void soc_camera_video_stop(struct soc_camera_device *icd)
 {
 	struct video_device *vdev = icd->vdev;
@@ -1154,10 +1160,8 @@ void soc_camera_video_stop(struct soc_camera_device *icd)
 	if (!icd->dev.parent || !vdev)
 		return;
 
-	mutex_lock(&icd->video_lock);
 	video_unregister_device(vdev);
 	icd->vdev = NULL;
-	mutex_unlock(&icd->video_lock);
 }
 EXPORT_SYMBOL(soc_camera_video_stop);
 
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index 2e593704727..b154bd961e3 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 
 #include <linux/usb.h>
 #include <linux/mm.h>
@@ -1049,8 +1050,8 @@ static int stk_setup_format(struct stk_camera *dev)
 		depth = 1;
 	else
 		depth = 2;
-	while (stk_sizes[i].m != dev->vsettings.mode
-			&& i < ARRAY_SIZE(stk_sizes))
+	while (i < ARRAY_SIZE(stk_sizes) &&
+			stk_sizes[i].m != dev->vsettings.mode)
 		i++;
 	if (i == ARRAY_SIZE(stk_sizes)) {
 		STK_ERROR("Something is broken in %s\n", __func__);
diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c
index 0eb313082c9..eaada39c76f 100644
--- a/drivers/media/video/stradis.c
+++ b/drivers/media/video/stradis.c
@@ -26,6 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/major.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/poll.h>
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
index 75f286f7a2e..8b4e7dafce7 100644
--- a/drivers/media/video/stv680.c
+++ b/drivers/media/video/stv680.c
@@ -62,6 +62,7 @@
 #include <linux/init.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/pagemap.h>
 #include <linux/errno.h>
 #include <linux/videodev.h>
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index 8d73979596f..45fce39ec9a 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -43,6 +43,7 @@
 #include <linux/vmalloc.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/firmware.h>
 #include <linux/ihex.h>
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 90b58914f98..90d9b5c0e9a 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -50,6 +50,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/utsname.h>
 #include <linux/highmem.h>
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index 89927b7aec2..04b47832fa0 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -1845,11 +1845,29 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_STREAM_NO_FID },
-	/* ViMicro */
-	{ .match_flags		= USB_DEVICE_ID_MATCH_VENDOR
+	/* ViMicro Vega */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x0ac8,
+	  .idProduct		= 0x332d,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_FIX_BANDWIDTH },
+	/* ViMicro - Minoru3D */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x0ac8,
+	  .idProduct		= 0x3410,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_FIX_BANDWIDTH },
+	/* ViMicro Venus - Minoru3D */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
 	  .idVendor		= 0x0ac8,
-	  .idProduct		= 0x0000,
+	  .idProduct		= 0x3420,
 	  .bInterfaceClass	= USB_CLASS_VIDEO,
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c
index f152a990386..1ca6dff7361 100644
--- a/drivers/media/video/uvc/uvc_status.c
+++ b/drivers/media/video/uvc/uvc_status.c
@@ -145,8 +145,8 @@ static void uvc_status_complete(struct urb *urb)
 			break;
 
 		default:
-			uvc_printk(KERN_INFO, "unknown event type %u.\n",
-				dev->status[0]);
+			uvc_trace(UVC_TRACE_STATUS, "Unknown status event "
+				"type %u.\n", dev->status[0]);
 			break;
 		}
 	}
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 31eac66411d..a7f1b69a7da 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -25,7 +25,6 @@
 #include <linux/init.h>
 #include <linux/kmod.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
 
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index be64a502ea2..f2afc4e0837 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -1081,8 +1081,10 @@ static long __video_do_ioctl(struct file *file,
 		/* Calls the specific handler */
 		if (ops->vidioc_g_std)
 			ret = ops->vidioc_g_std(file, fh, id);
-		else
+		else if (vfd->current_norm)
 			*id = vfd->current_norm;
+		else
+			ret = -EINVAL;
 
 		if (!ret)
 			dbgarg(cmd, "std=0x%08Lx\n", (long long unsigned)*id);
@@ -1553,12 +1555,19 @@ static long __video_do_ioctl(struct file *file,
 				break;
 			ret = ops->vidioc_g_parm(file, fh, p);
 		} else {
+			v4l2_std_id std = vfd->current_norm;
+
 			if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 				return -EINVAL;
 
-			v4l2_video_std_frame_period(vfd->current_norm,
-						    &p->parm.capture.timeperframe);
 			ret = 0;
+			if (ops->vidioc_g_std)
+				ret = ops->vidioc_g_std(file, fh, &std);
+			else if (std == 0)
+				ret = -EINVAL;
+			if (ret == 0)
+				v4l2_video_std_frame_period(std,
+						    &p->parm.capture.timeperframe);
 		}
 
 		dbgarg(cmd, "type=%d\n", p->type);
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index cd726685846..7705fc6baf0 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -343,6 +343,53 @@ static struct bar_std bars[] = {
 #define TO_U(r, g, b) \
 	(((-9714 * r - 19070 * g + 28784 * b + 32768) >> 16) + 128)
 
+/* precalculate color bar values to speed up rendering */
+static void precalculate_bars(struct vivi_fh *fh)
+{
+	struct vivi_dev *dev = fh->dev;
+	unsigned char r, g, b;
+	int k, is_yuv;
+
+	fh->input = dev->input;
+
+	for (k = 0; k < 8; k++) {
+		r = bars[fh->input].bar[k][0];
+		g = bars[fh->input].bar[k][1];
+		b = bars[fh->input].bar[k][2];
+		is_yuv = 0;
+
+		switch (fh->fmt->fourcc) {
+		case V4L2_PIX_FMT_YUYV:
+		case V4L2_PIX_FMT_UYVY:
+			is_yuv = 1;
+			break;
+		case V4L2_PIX_FMT_RGB565:
+		case V4L2_PIX_FMT_RGB565X:
+			r >>= 3;
+			g >>= 2;
+			b >>= 3;
+			break;
+		case V4L2_PIX_FMT_RGB555:
+		case V4L2_PIX_FMT_RGB555X:
+			r >>= 3;
+			g >>= 3;
+			b >>= 3;
+			break;
+		}
+
+		if (is_yuv) {
+			fh->bars[k][0] = TO_Y(r, g, b);	/* Luma */
+			fh->bars[k][1] = TO_U(r, g, b);	/* Cb */
+			fh->bars[k][2] = TO_V(r, g, b);	/* Cr */
+		} else {
+			fh->bars[k][0] = r;
+			fh->bars[k][1] = g;
+			fh->bars[k][2] = b;
+		}
+	}
+
+}
+
 #define TSTAMP_MIN_Y	24
 #define TSTAMP_MAX_Y	(TSTAMP_MIN_Y + 15)
 #define TSTAMP_INPUT_X	10
@@ -755,6 +802,8 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
 	buf->vb.height = fh->height;
 	buf->vb.field  = field;
 
+	precalculate_bars(fh);
+
 	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
 		rc = videobuf_iolock(vq, &buf->vb, NULL);
 		if (rc < 0)
@@ -893,53 +942,6 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	return 0;
 }
 
-/* precalculate color bar values to speed up rendering */
-static void precalculate_bars(struct vivi_fh *fh)
-{
-	struct vivi_dev *dev = fh->dev;
-	unsigned char r, g, b;
-	int k, is_yuv;
-
-	fh->input = dev->input;
-
-	for (k = 0; k < 8; k++) {
-		r = bars[fh->input].bar[k][0];
-		g = bars[fh->input].bar[k][1];
-		b = bars[fh->input].bar[k][2];
-		is_yuv = 0;
-
-		switch (fh->fmt->fourcc) {
-		case V4L2_PIX_FMT_YUYV:
-		case V4L2_PIX_FMT_UYVY:
-			is_yuv = 1;
-			break;
-		case V4L2_PIX_FMT_RGB565:
-		case V4L2_PIX_FMT_RGB565X:
-			r >>= 3;
-			g >>= 2;
-			b >>= 3;
-			break;
-		case V4L2_PIX_FMT_RGB555:
-		case V4L2_PIX_FMT_RGB555X:
-			r >>= 3;
-			g >>= 3;
-			b >>= 3;
-			break;
-		}
-
-		if (is_yuv) {
-			fh->bars[k][0] = TO_Y(r, g, b);	/* Luma */
-			fh->bars[k][1] = TO_U(r, g, b);	/* Cb */
-			fh->bars[k][2] = TO_V(r, g, b);	/* Cr */
-		} else {
-			fh->bars[k][0] = r;
-			fh->bars[k][1] = g;
-			fh->bars[k][2] = b;
-		}
-	}
-
-}
-
 /*FIXME: This seems to be generic enough to be at videodev2 */
 static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 					struct v4l2_format *f)
@@ -965,8 +967,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	fh->vb_vidq.field = f->fmt.pix.field;
 	fh->type          = f->type;
 
-	precalculate_bars(fh);
-
 	ret = 0;
 out:
 	mutex_unlock(&q->vb_lock);
@@ -1357,6 +1357,7 @@ static int __init vivi_create_instance(int inst)
 		goto unreg_dev;
 
 	*vfd = vivi_template;
+	vfd->debug = debug;
 
 	ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr);
 	if (ret < 0)
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 3d7df32a3d8..bcdefb1bcb3 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -49,6 +49,7 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/pci.h>
 #include <linux/vmalloc.h>
 #include <linux/wait.h>
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index fc976f42f43..2622a6e63da 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -695,7 +695,7 @@ static int zr364xx_release(struct file *file)
 	for (i = 0; i < 2; i++) {
 		err =
 		    send_control_msg(udev, 1, init[cam->method][i].value,
-				     0, init[i][cam->method].bytes,
+				     0, init[cam->method][i].bytes,
 				     init[cam->method][i].size);
 		if (err < 0) {
 			dev_err(&udev->dev, "error during release sequence\n");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 491ac0f800d..cc1f6edc916 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -263,6 +263,8 @@ config EZX_PCAP
 	  This enables the PCAP ASIC present on EZX Phones. This is
 	  needed for MMC, TouchScreen, Sound, USB, etc..
 
+source "drivers/mfd/glamo/Kconfig"
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 6f8a9a1af20..b72486106f9 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
 obj-$(CONFIG_MFD_ASIC3)		+= asic3.o
+obj-$(CONFIG_MFD_GLAMO)		+= glamo/
 
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 7ac12cb0be4..5b6e58a3ba4 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -32,8 +32,7 @@
  * This driver was tested with firmware revision A4.
  */
 
-#if defined(CONFIG_KEYBOARD_DM355EVM) \
-		|| defined(CONFIG_KEYBOARD_DM355EVM_MODULE)
+#if defined(CONFIG_INPUT_DM355EVM) || defined(CONFIG_INPUT_DM355EVM_MODULE)
 #define msp_has_keyboard()	true
 #else
 #define msp_has_keyboard()	false
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index 671a7efe86a..c1de4afa89a 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -238,8 +238,10 @@ static irqreturn_t pcap_adc_irq(int irq, void *_pcap)
 	mutex_lock(&pcap->adc_mutex);
 	req = pcap->adc_queue[pcap->adc_head];
 
-	if (WARN(!req, KERN_WARNING "adc irq without pending request\n"))
+	if (WARN(!req, KERN_WARNING "adc irq without pending request\n")) {
+		mutex_unlock(&pcap->adc_mutex);
 		return IRQ_HANDLED;
+	}
 
 	/* read requested channels results */
 	ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
diff --git a/drivers/mfd/glamo/Kconfig b/drivers/mfd/glamo/Kconfig
new file mode 100644
index 00000000000..8c93bcbdb46
--- /dev/null
+++ b/drivers/mfd/glamo/Kconfig
@@ -0,0 +1,41 @@
+config MFD_GLAMO
+	bool "Smedia Glamo 336x/337x support"
+	select MFD_CORE
+	help
+	  This enables the core driver for the Smedia Glamo 336x/337x
+	  multi-function device.  It includes irq_chip demultiplex as
+	  well as clock / power management and GPIO support.
+
+config MFD_GLAMO_FB
+	tristate "Smedia Glamo 336x/337x framebuffer support"
+	depends on FB && MFD_GLAMO
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Frame buffer driver for the LCD controller in the Smedia Glamo
+	  336x/337x.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called glamofb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/modules.txt>.
+
+	  If unsure, say N.
+
+config MFD_GLAMO_GPIO
+	tristate "Glamo GPIO support"
+	depends on MFD_GLAMO
+
+	help
+		Enable a bitbanging SPI adapter driver for the Smedia Glamo.
+
+config MFD_GLAMO_MCI
+	tristate "Glamo S3C SD/MMC Card Interface support"
+	depends on MFD_GLAMO && MMC && REGULATOR
+	help
+	  This selects a driver for the MCI interface found in
+	  the S-Media GLAMO chip, as used in Openmoko
+	  neo1973 GTA-02.
+
+	  If unsure, say N.
diff --git a/drivers/mfd/glamo/Makefile b/drivers/mfd/glamo/Makefile
new file mode 100644
index 00000000000..ebf26f7e473
--- /dev/null
+++ b/drivers/mfd/glamo/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Smedia Glamo framebuffer driver
+#
+
+obj-$(CONFIG_MFD_GLAMO)			+= glamo-core.o
+obj-$(CONFIG_MFD_GLAMO_GPIO)		+= glamo-gpio.o
+obj-$(CONFIG_MFD_GLAMO_SPI)		+= glamo-spi.o
+
+obj-$(CONFIG_MFD_GLAMO_FB)		+= glamo-fb.o
+obj-$(CONFIG_MFD_GLAMO_MCI)		+= glamo-mci.o
+
diff --git a/drivers/mfd/glamo/glamo-core.c b/drivers/mfd/glamo/glamo-core.c
new file mode 100644
index 00000000000..e0e39409595
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-core.c
@@ -0,0 +1,1284 @@
+/* Smedia Glamo 3362 driver
+ *
+ * (C) 2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/glamo.h>
+#include <linux/io.h>
+
+#include <linux/pm.h>
+
+#include "glamo-regs.h"
+#include "glamo-core.h"
+
+#define GLAMO_MEM_REFRESH_COUNT 0x100
+
+#define GLAMO_NR_IRQS 9
+
+#define GLAMO_IRQ_HOSTBUS	0
+#define GLAMO_IRQ_JPEG		1
+#define GLAMO_IRQ_MPEG		2
+#define GLAMO_IRQ_MPROC1	3
+#define GLAMO_IRQ_MPROC0	4
+#define GLAMO_IRQ_CMDQUEUE	5
+#define GLAMO_IRQ_2D		6
+#define GLAMO_IRQ_MMC		7
+#define GLAMO_IRQ_RISC		8
+
+/*
+ * Glamo internal settings
+ *
+ * We run the memory interface from the faster PLLB on 2.6.28 kernels and
+ * above.  Couple of GTA02 users report trouble with memory bus when they
+ * upgraded from 2.6.24.  So this parameter allows reversion to 2.6.24
+ * scheme if their Glamo chip needs it.
+ *
+ * you can override the faster default on kernel commandline using
+ *
+ *   glamo3362.slow_memory=1
+ *
+ * for example
+ */
+
+static int slow_memory;
+module_param(slow_memory, int, 0644);
+
+struct reg_range {
+	int start;
+	int count;
+	char *name;
+	unsigned dump:1;
+};
+
+static const struct reg_range reg_range[] = {
+	{ 0x0000, 0x76,		"General",	1 },
+	{ 0x0200, 0x18,		"Host Bus",	1 },
+	{ 0x0300, 0x38,		"Memory",	1 },
+/*	{ 0x0400, 0x100,	"Sensor",	0 }, */
+/*	{ 0x0500, 0x300,	"ISP",		0 }, */
+/*	{ 0x0800, 0x400,	"JPEG",		0 }, */
+/*	{ 0x0c00, 0xcc,		"MPEG",		0 }, */
+	{ 0x1100, 0xb2,		"LCD 1",	1 },
+	{ 0x1200, 0x64,		"LCD 2",	1 },
+	{ 0x1400, 0x42,		"MMC",		1 },
+/*	{ 0x1500, 0x080,	"MPU 0",	0 },
+	{ 0x1580, 0x080,	"MPU 1",	0 },
+	{ 0x1600, 0x080,	"Cmd Queue",	0 },
+	{ 0x1680, 0x080,	"RISC CPU",	0 },*/
+	{ 0x1700, 0x400,	"2D Unit",	1 },
+/*	{ 0x1b00, 0x900,	"3D Unit",	0 }, */
+};
+
+static inline void __reg_write(struct glamo_core *glamo,
+				uint16_t reg, uint16_t val)
+{
+	writew(val, glamo->base + reg);
+}
+
+void glamo_reg_write(struct glamo_core *glamo,
+				uint16_t reg, uint16_t val)
+{
+	spin_lock(&glamo->lock);
+	__reg_write(glamo, reg, val);
+	spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL_GPL(glamo_reg_write);
+
+
+static inline uint16_t __reg_read(struct glamo_core *glamo,
+					uint16_t reg)
+{
+	return readw(glamo->base + reg);
+}
+
+uint16_t glamo_reg_read(struct glamo_core *glamo, uint16_t reg)
+{
+	uint16_t val;
+	spin_lock(&glamo->lock);
+	val = __reg_read(glamo, reg);
+	spin_unlock(&glamo->lock);
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(glamo_reg_read);
+
+static void __reg_set_bit_mask(struct glamo_core *glamo,
+				uint16_t reg, uint16_t mask,
+				uint16_t val)
+{
+	uint16_t tmp;
+
+	val &= mask;
+
+	tmp = __reg_read(glamo, reg);
+	tmp &= ~mask;
+	tmp |= val;
+	__reg_write(glamo, reg, tmp);
+}
+
+static void reg_set_bit_mask(struct glamo_core *glamo,
+				uint16_t reg, uint16_t mask,
+				uint16_t val)
+{
+	spin_lock(&glamo->lock);
+	__reg_set_bit_mask(glamo, reg, mask, val);
+	spin_unlock(&glamo->lock);
+}
+
+static inline void __reg_set_bit(struct glamo_core *glamo,
+				 uint16_t reg, uint16_t bit)
+{
+	uint16_t tmp;
+	tmp = __reg_read(glamo, reg);
+	tmp |= bit;
+	__reg_write(glamo, reg, tmp);
+}
+
+static inline void __reg_clear_bit(struct glamo_core *glamo,
+					uint16_t reg, uint16_t bit)
+{
+	uint16_t tmp;
+	tmp = __reg_read(glamo, reg);
+	tmp &= ~bit;
+	__reg_write(glamo, reg, tmp);
+}
+
+static void __reg_write_batch(struct glamo_core *glamo, uint16_t reg,
+				uint16_t count, uint16_t *values)
+{
+	uint16_t end;
+	for (end = reg + count * 2; reg < end; reg += 2, ++values)
+		__reg_write(glamo, reg, *values);
+}
+
+static void __reg_read_batch(struct glamo_core *glamo, uint16_t reg,
+				uint16_t count, uint16_t *values)
+{
+	uint16_t end;
+	for (end = reg + count * 2; reg < end; reg += 2, ++values)
+		*values = __reg_read(glamo, reg);
+}
+
+void glamo_reg_write_batch(struct glamo_core *glamo, uint16_t reg,
+				uint16_t count, uint16_t *values)
+{
+	spin_lock(&glamo->lock);
+	__reg_write_batch(glamo, reg, count, values);
+	spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL(glamo_reg_write_batch);
+
+void glamo_reg_read_batch(struct glamo_core *glamo, uint16_t reg,
+				uint16_t count, uint16_t *values)
+{
+	spin_lock(&glamo->lock);
+	__reg_read_batch(glamo, reg, count, values);
+	spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL(glamo_reg_read_batch);
+
+/***********************************************************************
+ * resources of sibling devices
+ ***********************************************************************/
+
+static struct resource glamo_fb_resources[] = {
+	{
+		.name	= "glamo-fb-regs",
+		.start	= GLAMO_REGOFS_LCD,
+		.end	= GLAMO_REGOFS_MMC - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "glamo-fb-mem",
+		.start	= GLAMO_OFFSET_FB,
+		.end	= GLAMO_OFFSET_FB + GLAMO_FB_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource glamo_mmc_resources[] = {
+	{
+		.name	= "glamo-mmc-regs",
+		.start	= GLAMO_REGOFS_MMC,
+		.end	= GLAMO_REGOFS_MPROC0 - 1,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.name	= "glamo-mmc-mem",
+		.start	= GLAMO_OFFSET_FB + GLAMO_FB_SIZE,
+		.end	= GLAMO_OFFSET_FB + GLAMO_FB_SIZE +
+				  GLAMO_MMC_BUFFER_SIZE - 1,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= GLAMO_IRQ_MMC,
+		.end	= GLAMO_IRQ_MMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+enum glamo_cells {
+	GLAMO_CELL_FB,
+	GLAMO_CELL_MMC,
+	GLAMO_CELL_GPIO,
+};
+
+static const struct mfd_cell glamo_cells[] = {
+	[GLAMO_CELL_FB] = {
+		.name = "glamo-fb",
+		.num_resources = ARRAY_SIZE(glamo_fb_resources),
+		.resources = glamo_fb_resources,
+	},
+	[GLAMO_CELL_MMC] = {
+		.name = "glamo-mci",
+		.num_resources = ARRAY_SIZE(glamo_mmc_resources),
+		.resources = glamo_mmc_resources,
+	},
+	[GLAMO_CELL_GPIO] = {
+		.name = "glamo-gpio",
+	},
+};
+
+/***********************************************************************
+ * IRQ demultiplexer
+ ***********************************************************************/
+#define glamo_irq_bit(glamo, x)	BIT(x - glamo->irq_base)
+
+static inline struct glamo_core *irq_to_glamo(unsigned int irq)
+{
+	return (struct glamo_core *)get_irq_chip_data(irq);
+}
+
+static void glamo_ack_irq(unsigned int irq)
+{
+	struct glamo_core *glamo = irq_to_glamo(irq);
+	/* clear interrupt source */
+	__reg_write(glamo, GLAMO_REG_IRQ_CLEAR, glamo_irq_bit(glamo, irq));
+}
+
+static void glamo_mask_irq(unsigned int irq)
+{
+	struct glamo_core *glamo = irq_to_glamo(irq);
+
+	/* clear bit in enable register */
+	__reg_clear_bit(glamo, GLAMO_REG_IRQ_ENABLE, glamo_irq_bit(glamo, irq));
+}
+
+static void glamo_unmask_irq(unsigned int irq)
+{
+	struct glamo_core *glamo = irq_to_glamo(irq);
+
+	/* set bit in enable register */
+	__reg_set_bit(glamo, GLAMO_REG_IRQ_ENABLE, glamo_irq_bit(glamo, irq));
+}
+
+static struct irq_chip glamo_irq_chip = {
+	.name	= "glamo",
+	.ack	= glamo_ack_irq,
+	.mask	= glamo_mask_irq,
+	.unmask	= glamo_unmask_irq,
+};
+
+static void glamo_irq_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct glamo_core *glamo = get_irq_desc_data(desc);
+	desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
+
+	if (unlikely(desc->status & IRQ_INPROGRESS)) {
+		desc->status |= (IRQ_PENDING | IRQ_MASKED);
+		desc->chip->mask(irq);
+		desc->chip->ack(irq);
+		return;
+	}
+	kstat_incr_irqs_this_cpu(irq, desc);
+
+	desc->chip->ack(irq);
+	desc->status |= IRQ_INPROGRESS;
+
+	do {
+		uint16_t irqstatus;
+		int i;
+
+		if (unlikely((desc->status &
+				(IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) ==
+				(IRQ_PENDING | IRQ_MASKED))) {
+			/* dealing with pending IRQ, unmasking */
+			desc->chip->unmask(irq);
+			desc->status &= ~IRQ_MASKED;
+		}
+
+		desc->status &= ~IRQ_PENDING;
+
+		/* read IRQ status register */
+		irqstatus = __reg_read(glamo, GLAMO_REG_IRQ_STATUS);
+		for (i = 0; i < 9; ++i) {
+			if (irqstatus & BIT(i))
+				generic_handle_irq(glamo->irq_base + i);
+		}
+
+	} while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING);
+
+	desc->status &= ~IRQ_INPROGRESS;
+}
+
+/*
+sysfs
+*/
+
+static ssize_t regs_write(struct device *dev, struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct glamo_core *glamo = dev_get_drvdata(dev);
+	unsigned int reg;
+	unsigned int val;
+
+	sscanf(buf, "%u %u", &reg, &val);
+	printk(KERN_INFO"reg 0x%02x <-- 0x%04x\n",
+		reg, val);
+
+	glamo_reg_write(glamo, reg, val);
+
+	return count;
+}
+
+static ssize_t regs_read(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct glamo_core *glamo = dev_get_drvdata(dev);
+	int i, n;
+	char *end = buf;
+	const struct reg_range *rr = reg_range;
+
+	spin_lock(&glamo->lock);
+
+	for (i = 0; i < ARRAY_SIZE(reg_range); ++i, ++rr) {
+		if (!rr->dump)
+			continue;
+		end += sprintf(end, "\n%s\n", rr->name);
+		for (n = rr->start; n < rr->start + rr->count; n += 2) {
+			if ((n & 15) == 0)
+				end += sprintf(end, "\n%04X:  ", n);
+			end += sprintf(end, "%04x ", __reg_read(glamo, n));
+		}
+		end += sprintf(end, "\n");
+	}
+	spin_unlock(&glamo->lock);
+
+	return end - buf;
+}
+
+static DEVICE_ATTR(regs, 0644, regs_read, regs_write);
+
+struct glamo_engine_reg_set {
+	uint16_t reg;
+	uint16_t mask_suspended;
+	uint16_t mask_enabled;
+};
+
+struct glamo_engine_desc {
+	const char *name;
+	uint16_t hostbus;
+	const struct glamo_engine_reg_set *regs;
+	int num_regs;
+};
+
+static const struct glamo_engine_reg_set glamo_lcd_regs[] = {
+	{ GLAMO_REG_CLOCK_LCD,
+	GLAMO_CLOCK_LCD_EN_M5CLK |
+	GLAMO_CLOCK_LCD_DG_M5CLK |
+	GLAMO_CLOCK_LCD_EN_DMCLK,
+
+	GLAMO_CLOCK_LCD_EN_DHCLK |
+	GLAMO_CLOCK_LCD_EN_DCLK
+	},
+	{ GLAMO_REG_CLOCK_GEN5_1,
+	GLAMO_CLOCK_GEN51_EN_DIV_DMCLK,
+
+	GLAMO_CLOCK_GEN51_EN_DIV_DHCLK |
+	GLAMO_CLOCK_GEN51_EN_DIV_DCLK
+	}
+};
+
+static const struct glamo_engine_reg_set glamo_mmc_regs[] = {
+	{ GLAMO_REG_CLOCK_MMC,
+	GLAMO_CLOCK_MMC_EN_M9CLK |
+	GLAMO_CLOCK_MMC_DG_M9CLK,
+
+	GLAMO_CLOCK_MMC_EN_TCLK |
+	GLAMO_CLOCK_MMC_DG_TCLK
+	},
+	{ GLAMO_REG_CLOCK_GEN5_1,
+	0,
+	GLAMO_CLOCK_GEN51_EN_DIV_TCLK
+	}
+};
+
+static const struct glamo_engine_reg_set glamo_2d_regs[] = {
+	{ GLAMO_REG_CLOCK_2D,
+	GLAMO_CLOCK_2D_EN_M7CLK |
+	GLAMO_CLOCK_2D_DG_M7CLK,
+
+	GLAMO_CLOCK_2D_EN_GCLK |
+	GLAMO_CLOCK_2D_DG_GCLK
+	},
+	{ GLAMO_REG_CLOCK_GEN5_1,
+	0,
+	GLAMO_CLOCK_GEN51_EN_DIV_GCLK,
+	}
+};
+
+static const struct glamo_engine_reg_set glamo_cmdq_regs[] = {
+	{ GLAMO_REG_CLOCK_2D,
+	GLAMO_CLOCK_2D_EN_M6CLK,
+	0
+	},
+};
+
+#define GLAMO_ENGINE(xname, xhostbus, xregs) { \
+	.name = xname, \
+	.hostbus = xhostbus, \
+	.num_regs = ARRAY_SIZE(xregs), \
+	.regs = xregs, \
+}
+
+static const struct glamo_engine_desc glamo_engines[] = {
+	[GLAMO_ENGINE_LCD] = GLAMO_ENGINE("LCD", GLAMO_HOSTBUS2_MMIO_EN_LCD,
+					glamo_lcd_regs),
+	[GLAMO_ENGINE_MMC] = GLAMO_ENGINE("MMC", GLAMO_HOSTBUS2_MMIO_EN_MMC,
+					glamo_mmc_regs),
+	[GLAMO_ENGINE_2D] = GLAMO_ENGINE("2D", GLAMO_HOSTBUS2_MMIO_EN_2D,
+					glamo_2d_regs),
+	[GLAMO_ENGINE_CMDQ] = GLAMO_ENGINE("CMDQ", GLAMO_HOSTBUS2_MMIO_EN_CQ,
+					glamo_cmdq_regs),
+};
+
+static inline const char *glamo_engine_name(enum glamo_engine engine)
+{
+	return glamo_engines[engine].name;
+}
+
+/***********************************************************************
+ * 'engine' support
+ ***********************************************************************/
+
+int __glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	int i;
+	const struct glamo_engine_desc *engine_desc = &glamo_engines[engine];
+	const struct glamo_engine_reg_set *reg;
+
+	switch (engine) {
+	case GLAMO_ENGINE_LCD:
+	case GLAMO_ENGINE_MMC:
+	case GLAMO_ENGINE_2D:
+	case GLAMO_ENGINE_CMDQ:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	reg = engine_desc->regs;
+
+	__reg_set_bit(glamo, GLAMO_REG_HOSTBUS(2),
+			engine_desc->hostbus);
+	for (i = engine_desc->num_regs; i; --i, ++reg)
+		__reg_set_bit(glamo, reg->reg,
+				reg->mask_suspended | reg->mask_enabled);
+
+	return 0;
+}
+
+int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	int ret = 0;
+
+	spin_lock(&glamo->lock);
+
+	if (glamo->engine_state[engine] != GLAMO_ENGINE_ENABLED) {
+		ret = __glamo_engine_enable(glamo, engine);
+		if (!ret)
+			glamo->engine_state[engine] = GLAMO_ENGINE_ENABLED;
+	}
+
+	spin_unlock(&glamo->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(glamo_engine_enable);
+
+int __glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	int i;
+	const struct glamo_engine_desc *engine_desc = &glamo_engines[engine];
+	const struct glamo_engine_reg_set *reg;
+
+	switch (engine) {
+	case GLAMO_ENGINE_LCD:
+	case GLAMO_ENGINE_MMC:
+	case GLAMO_ENGINE_2D:
+	case GLAMO_ENGINE_CMDQ:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	reg = engine_desc->regs;
+
+	__reg_clear_bit(glamo, GLAMO_REG_HOSTBUS(2),
+			engine_desc->hostbus);
+	for (i = engine_desc->num_regs; i; --i, ++reg)
+		__reg_clear_bit(glamo, reg->reg,
+				reg->mask_suspended | reg->mask_enabled);
+
+	return 0;
+}
+int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	int ret = 0;
+
+	spin_lock(&glamo->lock);
+
+	if (glamo->engine_state[engine] != GLAMO_ENGINE_DISABLED) {
+		ret = __glamo_engine_disable(glamo, engine);
+		if (!ret)
+			glamo->engine_state[engine] = GLAMO_ENGINE_DISABLED;
+	}
+
+	spin_unlock(&glamo->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(glamo_engine_disable);
+
+int __glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	int i;
+	const struct glamo_engine_desc *engine_desc = &glamo_engines[engine];
+	const struct glamo_engine_reg_set *reg;
+
+	switch (engine) {
+	case GLAMO_ENGINE_LCD:
+	case GLAMO_ENGINE_MMC:
+	case GLAMO_ENGINE_2D:
+	case GLAMO_ENGINE_CMDQ:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	reg = engine_desc->regs;
+
+	__reg_set_bit(glamo, GLAMO_REG_HOSTBUS(2),
+			engine_desc->hostbus);
+	for (i = engine_desc->num_regs; i; --i, ++reg) {
+		__reg_set_bit(glamo, reg->reg, reg->mask_suspended);
+		__reg_clear_bit(glamo, reg->reg, reg->mask_enabled);
+	}
+
+	return 0;
+}
+
+int glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	int ret = 0;
+
+	spin_lock(&glamo->lock);
+
+	if (glamo->engine_state[engine] != GLAMO_ENGINE_SUSPENDED) {
+		ret = __glamo_engine_suspend(glamo, engine);
+		if (!ret)
+			glamo->engine_state[engine] = GLAMO_ENGINE_SUSPENDED;
+	}
+
+	spin_unlock(&glamo->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(glamo_engine_suspend);
+
+static const struct glamo_script reset_regs[] = {
+	[GLAMO_ENGINE_LCD] = {
+		GLAMO_REG_CLOCK_LCD, GLAMO_CLOCK_LCD_RESET
+	},
+	[GLAMO_ENGINE_MMC] = {
+		GLAMO_REG_CLOCK_MMC, GLAMO_CLOCK_MMC_RESET
+	},
+	[GLAMO_ENGINE_CMDQ] = {
+		GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_CQ_RESET
+	},
+	[GLAMO_ENGINE_2D] = {
+		GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_RESET
+	},
+	[GLAMO_ENGINE_JPEG] = {
+		GLAMO_REG_CLOCK_JPEG, GLAMO_CLOCK_JPEG_RESET
+	},
+};
+
+void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine)
+{
+	uint16_t reg = reset_regs[engine].reg;
+	uint16_t val = reset_regs[engine].val;
+
+	if (engine >= ARRAY_SIZE(reset_regs)) {
+		dev_warn(&glamo->pdev->dev, "unknown engine %u ", engine);
+		return;
+	}
+
+	spin_lock(&glamo->lock);
+	__reg_set_bit(glamo, reg, val);
+	__reg_clear_bit(glamo, reg, val);
+	spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL_GPL(glamo_engine_reset);
+
+int glamo_pll_rate(struct glamo_core *glamo,
+			  enum glamo_pll pll)
+{
+	uint16_t reg;
+	unsigned int osci = glamo->pdata->osci_clock_rate;
+
+	switch (pll) {
+	case GLAMO_PLL1:
+		reg = __reg_read(glamo, GLAMO_REG_PLL_GEN1);
+		break;
+	case GLAMO_PLL2:
+		reg = __reg_read(glamo, GLAMO_REG_PLL_GEN3);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return (int)osci * (int)reg;
+}
+EXPORT_SYMBOL_GPL(glamo_pll_rate);
+
+int glamo_engine_reclock(struct glamo_core *glamo,
+			 enum glamo_engine engine,
+			 int hz)
+{
+	int pll;
+	uint16_t reg, mask, div;
+
+	if (!hz)
+		return -EINVAL;
+
+	switch (engine) {
+	case GLAMO_ENGINE_LCD:
+		pll = GLAMO_PLL1;
+		reg = GLAMO_REG_CLOCK_GEN7;
+		mask = 0xff;
+		break;
+	case GLAMO_ENGINE_MMC:
+		pll = GLAMO_PLL1;
+		reg = GLAMO_REG_CLOCK_GEN8;
+		mask = 0xff;
+		break;
+	default:
+		dev_warn(&glamo->pdev->dev,
+			 "reclock of engine 0x%x not supported\n", engine);
+		return -EINVAL;
+		break;
+	}
+
+	pll = glamo_pll_rate(glamo, pll);
+
+	div = pll / hz;
+
+	if (div != 0 && pll / div <= hz)
+		--div;
+
+	if (div > mask)
+		div = mask;
+
+	dev_dbg(&glamo->pdev->dev,
+			"PLL %d, kHZ %d, div %d\n", pll, hz / 1000, div);
+
+	reg_set_bit_mask(glamo, reg, mask, div);
+	mdelay(5); /* wait some time to stabilize */
+
+	return pll / (div + 1);
+}
+EXPORT_SYMBOL_GPL(glamo_engine_reclock);
+
+/***********************************************************************
+ * script support
+ ***********************************************************************/
+
+#define GLAMO_SCRIPT_END	0xffff
+#define GLAMO_SCRIPT_WAIT	0xfffe
+#define GLAMO_SCRIPT_LOCK_PLL	0xfffd
+
+/*
+ * couple of people reported artefacts with 2.6.28 changes, this
+ * allows reversion to 2.6.24 settings
+*/
+static const uint16_t reg_0x200[] = {
+0xe03, /* 0 waits on Async BB R & W, Use PLL 2 for mem bus */
+0xef0, /* 3 waits on Async BB R & W, Use PLL 1 for mem bus */
+0xea0, /* 2 waits on Async BB R & W, Use PLL 1 for mem bus */
+0xe50, /* 1 waits on Async BB R & W, Use PLL 1 for mem bus */
+0xe00, /* 0 waits on Async BB R & W, Use PLL 1 for mem bus */
+0xef3, /* 3 waits on Async BB R & W, Use PLL 2 for mem bus */
+0xea3, /* 2 waits on Async BB R & W, Use PLL 2 for mem bus */
+0xe53, /* 1 waits on Async BB R & W, Use PLL 2 for mem bus */
+};
+
+static int glamo_run_script(struct glamo_core *glamo,
+				const struct glamo_script *script, int len,
+				int may_sleep)
+{
+	int i;
+	uint16_t status;
+	const struct glamo_script *line = script;
+
+	for (i = 0; i < len; ++i, ++line) {
+		switch (line->reg) {
+		case GLAMO_SCRIPT_END:
+			return 0;
+		case GLAMO_SCRIPT_WAIT:
+			if (may_sleep)
+				msleep(line->val);
+			else
+				mdelay(line->val * 4);
+			break;
+		case GLAMO_SCRIPT_LOCK_PLL:
+			/* spin until PLLs lock */
+			do {
+				status = __reg_read(glamo, GLAMO_REG_PLL_GEN5);
+			} while ((status & 3) != 3);
+			break;
+		case 0x200:
+			__reg_write(glamo, line->reg,
+					reg_0x200[slow_memory & 0x8]);
+			break;
+		default:
+			__reg_write(glamo, line->reg, line->val);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static const struct glamo_script glamo_init_script[] = {
+	{ GLAMO_REG_CLOCK_HOST,		0x1000 },
+	{ GLAMO_SCRIPT_WAIT,		     2 },
+	{ GLAMO_REG_CLOCK_MEMORY, 	0x1000 },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x2000 },
+	{ GLAMO_REG_CLOCK_LCD,		0x1000 },
+	{ GLAMO_REG_CLOCK_MMC,		0x1000 },
+	{ GLAMO_REG_CLOCK_ISP,		0x1000 },
+	{ GLAMO_REG_CLOCK_ISP,		0x3000 },
+	{ GLAMO_REG_CLOCK_JPEG,		0x1000 },
+	{ GLAMO_REG_CLOCK_3D,		0x1000 },
+	{ GLAMO_REG_CLOCK_3D,		0x3000 },
+	{ GLAMO_REG_CLOCK_2D,		0x1000 },
+	{ GLAMO_REG_CLOCK_2D,		0x3000 },
+	{ GLAMO_REG_CLOCK_RISC1,	0x1000 },
+	{ GLAMO_REG_CLOCK_MPEG,		0x1000 },
+	{ GLAMO_REG_CLOCK_MPEG,		0x3000 },
+	{ GLAMO_REG_CLOCK_MPROC,	0x1000 /*0x100f*/ },
+	{ GLAMO_SCRIPT_WAIT,		     2 },
+	{ GLAMO_REG_CLOCK_HOST,		0x0000 },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x0000 },
+	{ GLAMO_REG_CLOCK_LCD,		0x0000 },
+	{ GLAMO_REG_CLOCK_MMC,		0x0000 },
+	{ GLAMO_REG_PLL_GEN1,		0x05db },	/* 48MHz */
+	{ GLAMO_REG_PLL_GEN3,		0x0aba },	/* 90MHz */
+	{ GLAMO_SCRIPT_LOCK_PLL, 0 },
+	/*
+	 * b9 of this register MUST be zero to get any interrupts on INT#
+	 * the other set bits enable all the engine interrupt sources
+	 */
+	{ GLAMO_REG_IRQ_ENABLE,		0x0100 },
+	{ GLAMO_REG_CLOCK_GEN6,		0x2000 },
+	{ GLAMO_REG_CLOCK_GEN7,		0x0101 },
+	{ GLAMO_REG_CLOCK_GEN8,		0x0100 },
+	{ GLAMO_REG_CLOCK_HOST,		0x000d },
+	/*
+	 * b7..b4 = 0 = no wait states on read or write
+	 * b0 = 1 select PLL2 for Host interface, b1 = enable it
+	 */
+	{ GLAMO_REG_HOSTBUS(0),		0x0e03 /* this is replaced by script parser */ },
+	{ GLAMO_REG_HOSTBUS(1),		0x07ff }, /* TODO: Disable all */
+	{ GLAMO_REG_HOSTBUS(10),	0x0000 },
+	{ GLAMO_REG_HOSTBUS(11),	0x4000 },
+	{ GLAMO_REG_HOSTBUS(12),	0xf00e },
+
+	/* S-Media recommended "set tiling mode to 512 mode for memory access
+	 * more efficiency when 640x480" */
+	{ GLAMO_REG_MEM_TYPE,		0x0c74 }, /* 8MB, 16 word pg wr+rd */
+	{ GLAMO_REG_MEM_GEN,		0xafaf }, /* 63 grants min + max */
+
+	{ GLAMO_REG_MEM_TIMING1,	0x0108 },
+	{ GLAMO_REG_MEM_TIMING2,	0x0010 }, /* Taa = 3 MCLK */
+	{ GLAMO_REG_MEM_TIMING3,	0x0000 },
+	{ GLAMO_REG_MEM_TIMING4,	0x0000 }, /* CE1# delay fall/rise */
+	{ GLAMO_REG_MEM_TIMING5,	0x0000 }, /* UB# LB# */
+	{ GLAMO_REG_MEM_TIMING6,	0x0000 }, /* OE# */
+	{ GLAMO_REG_MEM_TIMING7,	0x0000 }, /* WE# */
+	{ GLAMO_REG_MEM_TIMING8,	0x1002 }, /* MCLK delay, was 0x1000 */
+	{ GLAMO_REG_MEM_TIMING9,	0x6006 },
+	{ GLAMO_REG_MEM_TIMING10,	0x00ff },
+	{ GLAMO_REG_MEM_TIMING11,	0x0001 },
+	{ GLAMO_REG_MEM_POWER1,		0x0020 },
+	{ GLAMO_REG_MEM_POWER2,		0x0000 },
+	{ GLAMO_REG_MEM_DRAM1,		0x0000 },
+	{ GLAMO_SCRIPT_WAIT,		     1 },
+	{ GLAMO_REG_MEM_DRAM1,		0xc100 },
+	{ GLAMO_SCRIPT_WAIT,		     1 },
+	{ GLAMO_REG_MEM_DRAM1,		0xe100 },
+	{ GLAMO_REG_MEM_DRAM2,		0x01d6 },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x000b },
+};
+
+/* Find out if we can support this version of the Glamo chip */
+static int __devinit glamo_supported(struct glamo_core *glamo)
+{
+	uint16_t dev_id, rev_id;
+
+	dev_id = __reg_read(glamo, GLAMO_REG_DEVICE_ID);
+	rev_id = __reg_read(glamo, GLAMO_REG_REVISION_ID);
+
+	switch (dev_id) {
+	case 0x3650:
+		switch (rev_id) {
+		case GLAMO_CORE_REV_A2:
+			break;
+		case GLAMO_CORE_REV_A0:
+		case GLAMO_CORE_REV_A1:
+		case GLAMO_CORE_REV_A3:
+			dev_warn(&glamo->pdev->dev, "untested core revision "
+				 "%04x, your mileage may vary\n", rev_id);
+			break;
+		default:
+			dev_warn(&glamo->pdev->dev, "unknown glamo revision "
+				 "%04x, your mileage may vary\n", rev_id);
+		}
+		break;
+	default:
+		dev_err(&glamo->pdev->dev, "unsupported Glamo device %04x\n",
+			dev_id);
+		return 0;
+	}
+
+	dev_dbg(&glamo->pdev->dev, "Detected Glamo core %04x Revision %04x "
+		 "(%uHz CPU / %uHz Memory)\n", dev_id, rev_id,
+		 glamo_pll_rate(glamo, GLAMO_PLL1),
+		 glamo_pll_rate(glamo, GLAMO_PLL2));
+
+	return 1;
+}
+
+static int __devinit glamo_probe(struct platform_device *pdev)
+{
+	int ret = 0, irq, irq_base;
+	struct glamo_core *glamo;
+	struct resource *mem;
+
+	glamo = kmalloc(GFP_KERNEL, sizeof(*glamo));
+	if (!glamo)
+		return -ENOMEM;
+
+	spin_lock_init(&glamo->lock);
+
+	glamo->pdev = pdev;
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	glamo->irq = platform_get_irq(pdev, 0);
+	glamo->irq_base = irq_base = platform_get_irq(pdev, 1);
+	glamo->pdata = pdev->dev.platform_data;
+
+	if (glamo->irq < 0) {
+		ret = glamo->irq;
+		dev_err(&pdev->dev, "Failed to get platform irq: %d\n", ret);
+		goto err_free;
+	}
+
+	if (irq_base < 0) {
+		ret = glamo->irq;
+		dev_err(&pdev->dev, "Failed to get glamo irq base: %d\n", ret);
+		goto err_free;
+	}
+
+	if (!mem) {
+		dev_err(&pdev->dev, "Failed to get platform memory\n");
+		ret = -ENOENT;
+		goto err_free;
+	}
+
+	if (!glamo->pdata) {
+		dev_err(&pdev->dev, "Missing platform data\n");
+		ret = -ENOENT;
+		goto err_free;
+	}
+
+	/* only request the generic, hostbus and memory controller registers */
+	glamo->mem = request_mem_region(mem->start, GLAMO_REGOFS_VIDCAP,
+					pdev->name);
+
+	if (!glamo->mem) {
+		dev_err(&pdev->dev, "Failed to request io memory region\n");
+		ret = -ENOENT;
+		goto err_free;
+	}
+
+	glamo->base = ioremap(glamo->mem->start, resource_size(glamo->mem));
+	if (!glamo->base) {
+		dev_err(&pdev->dev, "Failed to ioremap() memory region\n");
+		goto err_release_mem_region;
+	}
+
+	/* confirm it isn't insane version */
+	if (!glamo_supported(glamo)) {
+		dev_err(&pdev->dev,
+			"This version of the Glamo is not supported\n");
+		goto err_iounmap;
+	}
+
+	platform_set_drvdata(pdev, glamo);
+
+	/* sysfs */
+	ret = device_create_file(&pdev->dev, &dev_attr_regs);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to create sysfs file\n");
+		goto err_iounmap;
+	}
+
+	/* init the chip with canned register set */
+	glamo_run_script(glamo, glamo_init_script,
+			 ARRAY_SIZE(glamo_init_script), 1);
+
+	/*
+	 * finally set the mfd interrupts up
+	 */
+	for (irq = irq_base; irq < irq_base + GLAMO_NR_IRQS; ++irq) {
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID);
+#else
+		set_irq_noprobe(irq);
+#endif
+		set_irq_chip_data(irq, glamo);
+		set_irq_chip_and_handler(irq, &glamo_irq_chip,
+					handle_level_irq);
+	}
+
+	set_irq_type(glamo->irq, IRQ_TYPE_EDGE_FALLING);
+	set_irq_data(glamo->irq, glamo);
+	set_irq_chained_handler(glamo->irq, glamo_irq_demux_handler);
+	glamo->irq_works = 1;
+
+	ret = mfd_add_devices(&pdev->dev, pdev->id, glamo_cells,
+				ARRAY_SIZE(glamo_cells), mem, glamo->irq_base);
+
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add child devices: %d\n", ret);
+		goto err_free_irqs;
+	}
+
+	dev_info(&glamo->pdev->dev, "Glamo core PLL1: %uHz, PLL2: %uHz\n",
+		 glamo_pll_rate(glamo, GLAMO_PLL1),
+		 glamo_pll_rate(glamo, GLAMO_PLL2));
+
+	return 0;
+
+err_free_irqs:
+	disable_irq(glamo->irq);
+	set_irq_chained_handler(glamo->irq, NULL);
+	set_irq_chip_data(glamo->irq, NULL);
+
+	for (irq = irq_base; irq < irq_base + GLAMO_NR_IRQS; ++irq) {
+		set_irq_chip(irq, NULL);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, 0);
+#else
+		set_irq_probe(irq);
+#endif
+		set_irq_chip_data(irq, NULL);
+	}
+err_iounmap:
+	iounmap(glamo->base);
+err_release_mem_region:
+	release_mem_region(glamo->mem->start, resource_size(glamo->mem));
+err_free:
+	platform_set_drvdata(pdev, NULL);
+	kfree(glamo);
+
+	return ret;
+}
+
+static int __devexit glamo_remove(struct platform_device *pdev)
+{
+	struct glamo_core *glamo = platform_get_drvdata(pdev);
+	int irq;
+	int irq_base = glamo->irq_base;
+
+	mfd_remove_devices(&pdev->dev);
+
+	disable_irq(glamo->irq);
+	set_irq_chained_handler(glamo->irq, NULL);
+	set_irq_chip_data(glamo->irq, NULL);
+
+	for (irq = irq_base; irq < irq_base + GLAMO_NR_IRQS; ++irq) {
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, 0);
+#else
+		set_irq_noprobe();
+#endif
+		set_irq_chip(irq, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+
+	platform_set_drvdata(pdev, NULL);
+	iounmap(glamo->base);
+	release_mem_region(glamo->mem->start, resource_size(glamo->mem));
+	kfree(glamo);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+#if 0
+static struct glamo_script glamo_resume_script[] = {
+
+	{ GLAMO_REG_PLL_GEN1,		0x05db },	/* 48MHz */
+	{ GLAMO_REG_PLL_GEN3,		0x0aba },	/* 90MHz */
+	{ GLAMO_REG_DFT_GEN6, 1 },
+		{ 0xfffe, 100 },
+		{ 0xfffd, 0 },
+	{ 0x200,	0x0e03 },
+
+	/*
+	 * b9 of this register MUST be zero to get any interrupts on INT#
+	 * the other set bits enable all the engine interrupt sources
+	 */
+	{ GLAMO_REG_IRQ_ENABLE,		0x01ff },
+	{ GLAMO_REG_CLOCK_HOST,		0x0018 },
+	{ GLAMO_REG_CLOCK_GEN5_1, 0x18b1 },
+
+	{ GLAMO_REG_MEM_DRAM1,		0x0000 },
+		{ 0xfffe, 1 },
+	{ GLAMO_REG_MEM_DRAM1,		0xc100 },
+		{ 0xfffe, 1 },
+	{ GLAMO_REG_MEM_DRAM1,		0xe100 },
+	{ GLAMO_REG_MEM_DRAM2,		0x01d6 },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x000b },
+};
+#endif
+
+#if 0
+static void glamo_power(struct glamo_core *glamo)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&glamo->lock, flags);
+
+	/*
+Power management
+static const REG_VALUE_MASK_TYPE reg_powerOn[] =
+{
+	{ REG_GEN_DFT6,	    REG_BIT_ALL,    REG_DATA(1u << 0)		},
+	{ REG_GEN_PLL3,	    0u,		    REG_DATA(1u << 13)		},
+	{ REG_GEN_MEM_CLK,  REG_BIT_ALL,    REG_BIT_EN_MOCACLK		},
+	{ REG_MEM_DRAM2,    0u,		    REG_BIT_EN_DEEP_POWER_DOWN	},
+	{ REG_MEM_DRAM1,    0u,		    REG_BIT_SELF_REFRESH	}
+};
+
+static const REG_VALUE_MASK_TYPE reg_powerStandby[] =
+{
+	{ REG_MEM_DRAM1,    REG_BIT_ALL,    REG_BIT_SELF_REFRESH    },
+	{ REG_GEN_MEM_CLK,  0u,		    REG_BIT_EN_MOCACLK	    },
+	{ REG_GEN_PLL3,	    REG_BIT_ALL,    REG_DATA(1u << 13)	    },
+	{ REG_GEN_DFT5,	    REG_BIT_ALL,    REG_DATA(1u << 0)	    }
+};
+
+static const REG_VALUE_MASK_TYPE reg_powerSuspend[] =
+{
+	{ REG_MEM_DRAM2,    REG_BIT_ALL,    REG_BIT_EN_DEEP_POWER_DOWN  },
+	{ REG_GEN_MEM_CLK,  0u,		    REG_BIT_EN_MOCACLK		},
+	{ REG_GEN_PLL3,	    REG_BIT_ALL,    REG_DATA(1u << 13)		},
+	{ REG_GEN_DFT5,	    REG_BIT_ALL,    REG_DATA(1u << 0)		}
+};
+*/
+	switch (new_state) {
+	case GLAMO_POWER_ON:
+
+		/*
+		 * glamo state on resume is nondeterministic in some
+		 * fundamental way, it has also been observed that the
+		 * Glamo reset pin can get asserted by, eg, touching it with
+		 * a scope probe.  So the only answer is to roll with it and
+		 * force an external reset on the Glamo during resume.
+		 */
+
+
+		break;
+
+	case GLAMO_POWER_SUSPEND:
+
+		break;
+	}
+	spin_unlock_irqrestore(&glamo->lock, flags);
+}
+#endif
+
+static int glamo_suspend(struct device *dev)
+{
+	struct glamo_core *glamo = dev_get_drvdata(dev);
+	int n;
+
+	spin_lock(&glamo->lock);
+
+	/* nuke interrupts */
+	__reg_write(glamo, GLAMO_REG_IRQ_ENABLE, 0x200);
+
+	/* take down each engine before we kill mem and pll */
+	for (n = 0; n < __NUM_GLAMO_ENGINES; n++) {
+		if (glamo->engine_state != GLAMO_ENGINE_DISABLED)
+			__glamo_engine_disable(glamo, n);
+	}
+
+	/* enable self-refresh */
+
+	__reg_write(glamo, GLAMO_REG_MEM_DRAM1,
+				GLAMO_MEM_DRAM1_EN_DRAM_REFRESH |
+				GLAMO_MEM_DRAM1_EN_GATE_CKE |
+				GLAMO_MEM_DRAM1_SELF_REFRESH |
+				GLAMO_MEM_REFRESH_COUNT);
+	__reg_write(glamo, GLAMO_REG_MEM_DRAM1,
+				GLAMO_MEM_DRAM1_EN_MODEREG_SET |
+				GLAMO_MEM_DRAM1_EN_DRAM_REFRESH |
+				GLAMO_MEM_DRAM1_EN_GATE_CKE |
+				GLAMO_MEM_DRAM1_SELF_REFRESH |
+				GLAMO_MEM_REFRESH_COUNT);
+
+	/* force RAM into deep powerdown */
+	__reg_write(glamo, GLAMO_REG_MEM_DRAM2,
+				GLAMO_MEM_DRAM2_DEEP_PWRDOWN |
+				(7 << 6) | /* tRC */
+				(1 << 4) | /* tRP */
+				(1 << 2) | /* tRCD */
+				2); /* CAS latency */
+
+	/* disable clocks to memory */
+	__reg_write(glamo, GLAMO_REG_CLOCK_MEMORY, 0);
+
+	/* all dividers from OSCI */
+	__reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1, 0x400, 0x400);
+
+	/* PLL2 into bypass */
+	__reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 12, 1 << 12);
+
+	__reg_write(glamo, GLAMO_BASIC_MMC_EN_TCLK_DLYA1, 0x0e00);
+
+	/* kill PLLS 1 then 2 */
+	__reg_write(glamo, GLAMO_REG_DFT_GEN5, 0x0001);
+	__reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 13, 1 << 13);
+
+	spin_unlock(&glamo->lock);
+
+	return 0;
+}
+
+static int glamo_resume(struct device *dev)
+{
+	struct glamo_core *glamo = dev_get_drvdata(dev);
+	int n;
+
+	(glamo->pdata->glamo_external_reset)(0);
+	udelay(10);
+	(glamo->pdata->glamo_external_reset)(1);
+	mdelay(5);
+
+	spin_lock(&glamo->lock);
+
+	glamo_run_script(glamo, glamo_init_script,
+			 ARRAY_SIZE(glamo_init_script), 0);
+
+
+	for (n = 0; n < __NUM_GLAMO_ENGINES; n++) {
+		switch (glamo->engine_state[n]) {
+		case GLAMO_ENGINE_SUSPENDED:
+			__glamo_engine_suspend(glamo, n);
+			break;
+		case GLAMO_ENGINE_ENABLED:
+			__glamo_engine_enable(glamo, n);
+			break;
+		default:
+			break;
+		}
+	}
+
+	spin_unlock(&glamo->lock);
+
+	return 0;
+}
+
+static struct dev_pm_ops glamo_pm_ops = {
+	.suspend    = glamo_suspend,
+	.resume     = glamo_resume,
+	.poweroff   = glamo_suspend,
+	.restore    = glamo_resume,
+};
+
+#define GLAMO_PM_OPS (&glamo_pm_ops)
+
+#else
+#define GLAMO_PM_OPS NULL
+#endif
+
+static struct platform_driver glamo_driver = {
+	.probe		= glamo_probe,
+	.remove		= __devexit_p(glamo_remove),
+	.driver		= {
+		.name	= "glamo3362",
+		.owner	= THIS_MODULE,
+		.pm	= GLAMO_PM_OPS,
+	},
+};
+
+static int __devinit glamo_init(void)
+{
+	return platform_driver_register(&glamo_driver);
+}
+module_init(glamo_init);
+
+static void __exit glamo_exit(void)
+{
+	platform_driver_unregister(&glamo_driver);
+}
+module_exit(glamo_exit);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Smedia Glamo 3362 core/resource driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:glamo3362");
diff --git a/drivers/mfd/glamo/glamo-core.h b/drivers/mfd/glamo/glamo-core.h
new file mode 100644
index 00000000000..e5b1a35518a
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-core.h
@@ -0,0 +1,60 @@
+#ifndef __GLAMO_CORE_H
+#define __GLAMO_CORE_H
+
+#include <linux/mfd/glamo.h>
+
+/* for the time being, we put the on-screen framebuffer into the lowest
+ * VRAM space.  This should make the code easily compatible with the various
+ * 2MB/4MB/8MB variants of the Smedia chips */
+#define GLAMO_OFFSET_VRAM	0x800000
+#define GLAMO_OFFSET_FB	(GLAMO_OFFSET_VRAM)
+
+/* we only allocate the minimum possible size for the framebuffer to make
+ * sure we have sufficient memory for other functions of the chip */
+/*#define GLAMO_FB_SIZE	(640*480*4)	*//* == 0x12c000 */
+#define GLAMO_INTERNAL_RAM_SIZE 0x800000
+#define GLAMO_MMC_BUFFER_SIZE (64 * 1024)
+#define GLAMO_FB_SIZE	(GLAMO_INTERNAL_RAM_SIZE - GLAMO_MMC_BUFFER_SIZE)
+
+enum glamo_pll {
+    GLAMO_PLL1,
+    GLAMO_PLL2,
+};
+
+enum glamo_engine_state {
+    GLAMO_ENGINE_DISABLED,
+    GLAMO_ENGINE_SUSPENDED,
+    GLAMO_ENGINE_ENABLED,
+};
+
+struct glamo_core {
+	int irq;
+	int irq_base;
+	int irq_works; /* 0 means PCB does not support Glamo IRQ */
+	struct resource *mem;
+	void __iomem *base;
+	struct platform_device *pdev;
+	struct glamo_platform_data *pdata;
+	enum glamo_engine_state engine_state[__NUM_GLAMO_ENGINES];
+	spinlock_t lock;
+};
+
+struct glamo_script {
+	uint16_t reg;
+	uint16_t val;
+};
+
+int glamo_pll_rate(struct glamo_core *glamo, enum glamo_pll pll);
+
+int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine);
+int glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine);
+int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine);
+void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine);
+int glamo_engine_reclock(struct glamo_core *glamo,
+			 enum glamo_engine engine, int ps);
+
+void glamo_reg_read_batch(struct glamo_core *glamo, uint16_t reg,
+				uint16_t count, uint16_t *values);
+void glamo_reg_write_batch(struct glamo_core *glamo, uint16_t reg,
+				uint16_t count, uint16_t *values);
+#endif /* __GLAMO_CORE_H */
diff --git a/drivers/mfd/glamo/glamo-fb.c b/drivers/mfd/glamo/glamo-fb.c
new file mode 100644
index 00000000000..61a457760f1
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-fb.c
@@ -0,0 +1,981 @@
+/* Smedia Glamo 336x/337x driver
+ *
+ * (C) 2007-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/mfd/glamo.h>
+
+#include <asm/div64.h>
+
+#ifdef CONFIG_PM
+#include <linux/pm.h>
+#endif
+
+#include <linux/glamofb.h>
+
+#include "glamo-regs.h"
+#include "glamo-core.h"
+
+static void glamofb_program_mode(struct glamofb_handle *glamo);
+
+struct glamofb_handle {
+	struct glamo_core *core;
+	struct fb_info *fb;
+	struct device *dev;
+	struct resource *reg;
+	struct resource *fb_res;
+	char __iomem *base;
+	struct glamo_fb_platform_data *mach_info;
+	char __iomem *cursor_addr;
+	int cursor_on;
+	u_int32_t pseudo_pal[16];
+	spinlock_t lock_cmd;
+	int blank_mode;
+	int mode_set; /* 0 if the current display mode hasn't been set on the glamo */
+	int output_enabled; /* 0 if the video output is disabled */
+};
+
+static void glamo_output_enable(struct glamofb_handle *gfb)
+{
+	struct glamo_core *gcore = gfb->core;
+
+	if (gfb->output_enabled)
+		return;
+
+	/* enable the pixel clock if off */
+	glamo_engine_enable(gcore, GLAMO_ENGINE_LCD);
+
+	gfb->output_enabled = 1;
+	if (!gfb->mode_set)
+		glamofb_program_mode(gfb);
+}
+
+static void glamo_output_disable(struct glamofb_handle *gfb)
+{
+	struct glamo_core *gcore = gfb->core;
+
+	if (!gfb->output_enabled)
+		return;
+
+	/* enable the pixel clock if off */
+	glamo_engine_suspend(gcore, GLAMO_ENGINE_LCD);
+
+	gfb->output_enabled = 0;
+}
+
+
+static int reg_read(struct glamofb_handle *glamo,
+			   u_int16_t reg)
+{
+	int i = 0;
+
+	for (i = 0; i != 2; i++)
+		nop();
+
+	return readw(glamo->base + reg);
+}
+
+static void reg_write(struct glamofb_handle *glamo,
+			 uint16_t reg, uint16_t val)
+{
+	int i = 0;
+
+	for (i = 0; i != 2; i++)
+		nop();
+
+	writew(val, glamo->base + reg);
+}
+
+static struct glamo_script glamo_regs[] = {
+	{ GLAMO_REG_LCD_MODE1, 0x0020 },
+	/* no display rotation, no hardware cursor, no dither, no gamma,
+	 * no retrace flip, vsync low-active, hsync low active,
+	 * no TVCLK, no partial display, hw dest color from fb,
+	 * no partial display mode, LCD1, software flip,  */
+	{ GLAMO_REG_LCD_MODE2, 0x9020 },
+	  /* video flip, no ptr, no ptr, dhclk off,
+	   * normal mode,  no cpuif,
+	   * res, serial msb first, single fb, no fr ctrl,
+	   * cpu if bits all zero, no crc
+	   * 0000 0000 0010  0000 */
+	{ GLAMO_REG_LCD_MODE3, 0x0b40 },
+	  /* src data rgb565, res, 18bit rgb666
+	   * 000 01 011 0100 0000 */
+	{ GLAMO_REG_LCD_POLARITY, 0x440c },
+	  /* DE high active, no cpu/lcd if, cs0 force low, a0 low active,
+	   * np cpu if, 9bit serial data, sclk rising edge latch data
+	   * 01 00 0 100 0 000 01 0 0 */
+	/* The following values assume 640*480@16bpp */
+	{ GLAMO_REG_LCD_A_BASE1, 0x0000 }, /* display A base address 15:0 */
+	{ GLAMO_REG_LCD_A_BASE2, 0x0000 }, /* display A base address 22:16 */
+	{ GLAMO_REG_LCD_CURSOR_BASE1, 0xC000 }, /* cursor base address 15:0 */
+	{ GLAMO_REG_LCD_CURSOR_BASE2, 0x0012 }, /* cursor base address 22:16 */
+	{ GLAMO_REG_LCD_COMMAND2, 0x0000 }, /* display page A */
+};
+
+static int glamofb_run_script(struct glamofb_handle *glamo,
+				struct glamo_script *script, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		struct glamo_script *line = &script[i];
+
+		if (line->reg == 0xffff)
+			return 0;
+		else if (line->reg == 0xfffe)
+			msleep(line->val);
+		else
+			reg_write(glamo, script[i].reg, script[i].val);
+	}
+
+	return 0;
+}
+
+static int glamofb_check_var(struct fb_var_screeninfo *var,
+				 struct fb_info *info)
+{
+	struct glamofb_handle *glamo = info->par;
+
+	if (var->bits_per_pixel != 16)
+		var->bits_per_pixel = 16;
+
+	var->height = glamo->mach_info->height;
+	var->width = glamo->mach_info->width;
+
+	/* FIXME: set rgb positions */
+	switch (var->bits_per_pixel) {
+	case 16:
+		switch (reg_read(glamo, GLAMO_REG_LCD_MODE3) & 0xc000) {
+		case GLAMO_LCD_SRC_RGB565:
+			var->red.offset		= 11;
+			var->green.offset	= 5;
+			var->blue.offset	= 0;
+			var->red.length		= 5;
+			var->green.length	= 6;
+			var->blue.length	= 5;
+			var->transp.length	= 0;
+			break;
+		case GLAMO_LCD_SRC_ARGB1555:
+			var->transp.offset	= 15;
+			var->red.offset		= 10;
+			var->green.offset	= 5;
+			var->blue.offset	= 0;
+			var->transp.length	= 1;
+			var->red.length		= 5;
+			var->green.length	= 5;
+			var->blue.length	= 5;
+			break;
+		case GLAMO_LCD_SRC_ARGB4444:
+			var->transp.offset	= 12;
+			var->red.offset		= 8;
+			var->green.offset	= 4;
+			var->blue.offset	= 0;
+			var->transp.length	= 4;
+			var->red.length		= 4;
+			var->green.length	= 4;
+			var->blue.length	= 4;
+			break;
+		}
+		break;
+	case 24:
+	case 32:
+	default:
+		/* The Smedia Glamo doesn't support anything but 16bit color */
+		printk(KERN_ERR
+			"Smedia driver does not [yet?] support 24/32bpp\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void reg_set_bit_mask(struct glamofb_handle *glamo,
+				uint16_t reg, uint16_t mask,
+				uint16_t val)
+{
+	u_int16_t tmp;
+
+	val &= mask;
+
+	tmp = reg_read(glamo, reg);
+	tmp &= ~mask;
+	tmp |= val;
+	reg_write(glamo, reg, tmp);
+}
+
+#define GLAMO_LCD_WIDTH_MASK 0x03FF
+#define GLAMO_LCD_HEIGHT_MASK 0x03FF
+#define GLAMO_LCD_PITCH_MASK 0x07FE
+#define GLAMO_LCD_HV_TOTAL_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_START_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_END_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_DISP_START_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_DISP_END_MASK 0x03FF
+
+/* the caller has to enxure lock_cmd is held and we are in cmd mode */
+static void __rotate_lcd(struct glamofb_handle *glamo, __u32 rotation)
+{
+	int glamo_rot;
+
+	switch (rotation) {
+	case FB_ROTATE_CW:
+		glamo_rot = GLAMO_LCD_ROT_MODE_90;
+		break;
+	case FB_ROTATE_UD:
+		glamo_rot = GLAMO_LCD_ROT_MODE_180;
+		break;
+	case FB_ROTATE_CCW:
+		glamo_rot = GLAMO_LCD_ROT_MODE_270;
+		break;
+	default:
+		glamo_rot = GLAMO_LCD_ROT_MODE_0;
+		break;
+	}
+
+	reg_set_bit_mask(glamo,
+			 GLAMO_REG_LCD_WIDTH,
+			 GLAMO_LCD_ROT_MODE_MASK,
+			 glamo_rot);
+	reg_set_bit_mask(glamo,
+			 GLAMO_REG_LCD_MODE1,
+			 GLAMO_LCD_MODE1_ROTATE_EN,
+			 (glamo_rot != GLAMO_LCD_ROT_MODE_0) ?
+				 GLAMO_LCD_MODE1_ROTATE_EN : 0);
+}
+
+static void glamofb_program_mode(struct glamofb_handle *gfb)
+{
+	int sync, bp, disp, fp, total;
+	unsigned long flags;
+	struct glamo_core *gcore = gfb->core;
+	struct fb_var_screeninfo *var = &gfb->fb->var;
+
+	dev_dbg(&gcore->pdev->dev,
+			  "glamofb_program_mode spin_lock_irqsave\n");
+	spin_lock_irqsave(&gfb->lock_cmd, flags);
+
+	if (glamofb_cmd_mode(gfb, 1))
+		goto out_unlock;
+
+	if (var->pixclock)
+		glamo_engine_reclock(gcore, GLAMO_ENGINE_LCD,
+				 (1000000000UL / gfb->fb->var.pixclock) * 1000);
+
+	reg_set_bit_mask(gfb,
+			 GLAMO_REG_LCD_WIDTH,
+			 GLAMO_LCD_WIDTH_MASK,
+			 var->xres);
+	reg_set_bit_mask(gfb,
+			 GLAMO_REG_LCD_HEIGHT,
+			 GLAMO_LCD_HEIGHT_MASK,
+			 var->yres);
+	reg_set_bit_mask(gfb,
+			 GLAMO_REG_LCD_PITCH,
+			 GLAMO_LCD_PITCH_MASK,
+			 gfb->fb->fix.line_length);
+
+	/* honour the rotation request */
+	__rotate_lcd(gfb, var->rotate);
+
+	/* update scannout timings */
+	sync = 0;
+	bp = sync + var->hsync_len;
+	disp = bp + var->left_margin;
+	fp = disp + var->xres;
+	total = fp + var->right_margin;
+
+	reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_TOTAL,
+			 GLAMO_LCD_HV_TOTAL_MASK, total);
+	reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_RETR_START,
+			 GLAMO_LCD_HV_RETR_START_MASK, sync);
+	reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_RETR_END,
+			 GLAMO_LCD_HV_RETR_END_MASK, bp);
+	reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_DISP_START,
+			  GLAMO_LCD_HV_RETR_DISP_START_MASK, disp);
+	reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_DISP_END,
+			 GLAMO_LCD_HV_RETR_DISP_END_MASK, fp);
+
+	sync = 0;
+	bp = sync + var->vsync_len;
+	disp = bp + var->upper_margin;
+	fp = disp + var->yres;
+	total = fp + var->lower_margin;
+
+	reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_TOTAL,
+			 GLAMO_LCD_HV_TOTAL_MASK, total);
+	reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_RETR_START,
+			  GLAMO_LCD_HV_RETR_START_MASK, sync);
+	reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_RETR_END,
+			 GLAMO_LCD_HV_RETR_END_MASK, bp);
+	reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_DISP_START,
+			 GLAMO_LCD_HV_RETR_DISP_START_MASK, disp);
+	reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_DISP_END,
+			 GLAMO_LCD_HV_RETR_DISP_END_MASK, fp);
+
+	glamofb_cmd_mode(gfb, 0);
+
+	gfb->mode_set = 1;
+
+out_unlock:
+	dev_dbg(&gcore->pdev->dev,
+		  "glamofb_program_mode spin_unlock_irqrestore\n");
+	spin_unlock_irqrestore(&gfb->lock_cmd, flags);
+}
+
+
+static int glamofb_pan_display(struct fb_var_screeninfo *var,
+		struct fb_info *info)
+{
+	return 0;
+}
+
+static struct fb_videomode *glamofb_find_mode(struct fb_info *info,
+						struct fb_var_screeninfo *var)
+{
+	struct glamofb_handle *glamo = info->par;
+	struct glamo_fb_platform_data *pdata = glamo->mach_info;
+	struct fb_videomode *mode;
+	int i;
+
+	for (i = pdata->num_modes, mode = pdata->modes; i; --i, ++mode) {
+		if (mode->xres == var->xres &&
+			mode->yres == var->yres)
+			return mode;
+	}
+
+	return NULL;
+}
+
+static int glamofb_set_par(struct fb_info *info)
+{
+	struct glamofb_handle *glamo = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	struct fb_videomode *mode;
+
+	mode = glamofb_find_mode(info, var);
+	if (!mode)
+		return -EINVAL;
+
+	fb_videomode_to_var(var, mode);
+
+	info->mode = mode;
+
+	glamo->mode_set = 0;
+
+	switch (var->rotate) {
+	case FB_ROTATE_CW:
+	case FB_ROTATE_CCW:
+		info->fix.line_length = (var->yres * var->bits_per_pixel) / 8;
+		/* FIXME: Limit pixelclock */
+		var->pixclock *= 2;
+		break;
+	default:
+		info->fix.line_length = (var->xres * var->bits_per_pixel) / 8;
+		break;
+	}
+
+	if (glamo->output_enabled)
+		glamofb_program_mode(glamo);
+
+	return 0;
+}
+
+static int glamofb_blank(int blank_mode, struct fb_info *info)
+{
+	struct glamofb_handle *gfb = info->par;
+
+	dev_dbg(gfb->dev, "glamofb_blank(%u)\n", blank_mode);
+
+	switch (blank_mode) {
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+		/* FIXME: add pdata hook/flag to indicate whether
+		 * we should already switch off pixel clock here */
+		break;
+	case FB_BLANK_POWERDOWN:
+		/* disable the pixel clock */
+		glamo_output_disable(gfb);
+		gfb->blank_mode = blank_mode;
+		break;
+	case FB_BLANK_UNBLANK:
+	case FB_BLANK_NORMAL:
+		glamo_output_enable(gfb);
+		gfb->blank_mode = blank_mode;
+		break;
+	}
+
+	/* FIXME: once we have proper clock management in glamo-core,
+	 * we can determine if other units need MCLK1 or the PLL, and
+	 * disable it if not used. */
+	return 0;
+}
+
+static inline unsigned int chan_to_field(unsigned int chan,
+					 struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+static int glamofb_setcolreg(unsigned regno,
+				unsigned red, unsigned green, unsigned blue,
+				unsigned transp, struct fb_info *info)
+{
+	struct glamofb_handle *glamo = info->par;
+	unsigned int val;
+
+	switch (glamo->fb->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+	case FB_VISUAL_DIRECTCOLOR:
+		/* true-colour, use pseuo-palette */
+
+		if (regno < 16) {
+			u32 *pal = glamo->fb->pseudo_palette;
+
+			val  = chan_to_field(red, &glamo->fb->var.red);
+			val |= chan_to_field(green, &glamo->fb->var.green);
+			val |= chan_to_field(blue, &glamo->fb->var.blue);
+
+			pal[regno] = val;
+		};
+		break;
+	default:
+		return 1; /* unknown type */
+	}
+
+	return 0;
+}
+
+static int glamofb_ioctl(struct fb_info *info, unsigned int cmd,
+				unsigned long arg)
+{
+	struct glamofb_handle *gfb = (struct glamofb_handle *)info->par;
+	struct glamo_core *gcore = gfb->core;
+	int retval = -ENOTTY;
+
+	switch (cmd) {
+	case GLAMOFB_ENGINE_ENABLE:
+		retval = glamo_engine_enable(gcore, arg);
+		break;
+	case GLAMOFB_ENGINE_DISABLE:
+		retval = glamo_engine_disable(gcore, arg);
+		break;
+	case GLAMOFB_ENGINE_RESET:
+		glamo_engine_reset(gcore, arg);
+		retval = 0;
+		break;
+	default:
+		break;
+	}
+
+	return retval;
+}
+
+
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+static inline void glamofb_vsync_wait(struct glamofb_handle *glamo,
+		int line, int size, int range)
+{
+	int count[2];
+
+	do {
+		count[0] = reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff;
+		count[1] = reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff;
+	} while (count[0] != count[1] ||
+			(line < count[0] + range &&
+			 size > count[0] - range) ||
+			count[0] < range * 2);
+}
+
+/*
+ * Enable/disable the hardware cursor mode altogether
+ * (for blinking and such, use glamofb_cursor()).
+ */
+static void glamofb_cursor_onoff(struct glamofb_handle *glamo, int on)
+{
+	int y, size;
+
+	if (glamo->cursor_on) {
+		y = reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_POS);
+		size = reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE);
+
+		glamofb_vsync_wait(glamo, y, size, 30);
+	}
+
+	reg_set_bit_mask(glamo, GLAMO_REG_LCD_MODE1,
+			GLAMO_LCD_MODE1_CURSOR_EN,
+			on ? GLAMO_LCD_MODE1_CURSOR_EN : 0);
+	glamo->cursor_on = on;
+
+	/* Hide the cursor by default */
+	reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE, 0);
+}
+
+static int glamofb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+	struct glamofb_handle *glamo = info->par;
+	unsigned long flags;
+
+	spin_lock_irqsave(&glamo->lock_cmd, flags);
+
+	reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE,
+			cursor->enable ? cursor->image.width : 0);
+
+	if (cursor->set & FB_CUR_SETPOS) {
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_POS,
+			  cursor->image.dx);
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_POS,
+			  cursor->image.dy);
+	}
+
+	if (cursor->set & FB_CUR_SETCMAP) {
+		uint16_t fg = glamo->pseudo_pal[cursor->image.fg_color];
+		uint16_t bg = glamo->pseudo_pal[cursor->image.bg_color];
+
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_FG_COLOR, fg);
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_BG_COLOR, bg);
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_DST_COLOR, fg);
+	}
+
+	if (cursor->set & FB_CUR_SETHOT)
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_PRESET,
+				(cursor->hot.x << 8) | cursor->hot.y);
+
+	if ((cursor->set & FB_CUR_SETSIZE) ||
+	    (cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE))) {
+		int x, y, pitch, op;
+		const uint8_t *pcol = cursor->image.data;
+		const uint8_t *pmsk = cursor->mask;
+		uint8_t __iomem *dst = glamo->cursor_addr;
+		uint8_t dcol = 0;
+		uint8_t dmsk = 0;
+		uint8_t byte = 0;
+
+		if (cursor->image.depth > 1) {
+			spin_unlock_irqrestore(&glamo->lock_cmd, flags);
+			return -EINVAL;
+		}
+
+		pitch = ((cursor->image.width + 7) >> 2) & ~1;
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_PITCH,
+			pitch);
+		reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE,
+			cursor->image.height);
+
+		for (y = 0; y < cursor->image.height; y++) {
+			byte = 0;
+			for (x = 0; x < cursor->image.width; x++) {
+				if ((x % 8) == 0) {
+					dcol = *pcol++;
+					dmsk = *pmsk++;
+				} else {
+					dcol >>= 1;
+					dmsk >>= 1;
+				}
+
+				if (cursor->rop == ROP_COPY)
+					op = (dmsk & 1) ?
+						(dcol & 1) ? 1 : 3 : 0;
+				else
+					op = ((dmsk & 1) << 1) |
+						((dcol & 1) << 0);
+				byte |= op << ((x & 3) << 1);
+
+				if (x % 4 == 3) {
+					writeb(byte, dst + x / 4);
+					byte = 0;
+				}
+			}
+			if (x % 4) {
+				writeb(byte, dst + x / 4);
+				byte = 0;
+			}
+
+			dst += pitch;
+		}
+	}
+
+	spin_unlock_irqrestore(&glamo->lock_cmd, flags);
+
+	return 0;
+}
+#endif
+
+static inline int glamofb_cmdq_empty(struct glamofb_handle *gfb)
+{
+	/* DGCMdQempty -- 1 == command queue is empty */
+	return reg_read(gfb, GLAMO_REG_LCD_STATUS1) & (1 << 15);
+}
+
+/* call holding gfb->lock_cmd  when locking, until you unlock */
+int glamofb_cmd_mode(struct glamofb_handle *gfb, int on)
+{
+	int timeout = 2000000;
+
+	dev_dbg(gfb->dev, "glamofb_cmd_mode(gfb=%p, on=%d)\n", gfb, on);
+	if (on) {
+		dev_dbg(gfb->dev, "%s: waiting for cmdq empty: ",
+			__func__);
+		while (!glamofb_cmdq_empty(gfb) && (timeout--))
+			cpu_relax();
+		if (timeout < 0) {
+			printk(KERN_ERR "glamofb cmd_queue never got empty\n");
+			return -EIO;
+		}
+		dev_dbg(gfb->dev, "empty!\n");
+
+		/* display the entire frame then switch to command */
+		reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+			  GLAMO_LCD_CMD_TYPE_DISP |
+			  GLAMO_LCD_CMD_DATA_FIRE_VSYNC);
+
+		/* wait until lcd idle */
+		dev_dbg(gfb->dev, "waiting for lcd idle: ");
+		timeout = 2000000;
+		while (!(reg_read(gfb, GLAMO_REG_LCD_STATUS2) & (1 << 12)) &&
+		      (timeout--))
+			cpu_relax();
+		if (timeout < 0) {
+			printk(KERN_ERR"*************"
+				       "glamofb lcd never idle"
+				       "*************\n");
+			return -EIO;
+		}
+
+		mdelay(100);
+
+		dev_dbg(gfb->dev, "cmd mode entered\n");
+
+	} else {
+		/* RGB interface needs vsync/hsync */
+		if (reg_read(gfb, GLAMO_REG_LCD_MODE3) & GLAMO_LCD_MODE3_RGB)
+			reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+				  GLAMO_LCD_CMD_TYPE_DISP |
+				  GLAMO_LCD_CMD_DATA_DISP_SYNC);
+
+		reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+			  GLAMO_LCD_CMD_TYPE_DISP |
+			  GLAMO_LCD_CMD_DATA_DISP_FIRE);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(glamofb_cmd_mode);
+
+
+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val)
+{
+	int timeout = 200000;
+
+	dev_dbg(gfb->dev, "%s: waiting for cmdq empty\n", __func__);
+	while ((!glamofb_cmdq_empty(gfb)) && (timeout--))
+		yield();
+	if (timeout < 0) {
+		printk(KERN_ERR"*************"
+				"glamofb cmd_queue never got empty"
+				"*************\n");
+		return 1;
+	}
+	dev_dbg(gfb->dev, "idle, writing 0x%04x\n", val);
+
+	reg_write(gfb, GLAMO_REG_LCD_COMMAND1, val);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(glamofb_cmd_write);
+
+static struct fb_ops glamofb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= glamofb_check_var,
+	.fb_pan_display	= glamofb_pan_display,
+	.fb_set_par	= glamofb_set_par,
+	.fb_blank	= glamofb_blank,
+	.fb_setcolreg	= glamofb_setcolreg,
+	.fb_ioctl = glamofb_ioctl,
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+	.fb_cursor	= glamofb_cursor,
+#endif
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+static int glamofb_init_regs(struct glamofb_handle *glamo)
+{
+	struct fb_info *info = glamo->fb;
+
+	glamofb_check_var(&info->var, info);
+	glamofb_run_script(glamo, glamo_regs, ARRAY_SIZE(glamo_regs));
+	glamofb_set_par(info);
+
+	return 0;
+}
+
+static int __init glamofb_probe(struct platform_device *pdev)
+{
+	int rc = -EIO;
+	struct fb_info *fbinfo;
+	struct glamofb_handle *glamofb;
+	struct glamo_core *core = dev_get_drvdata(pdev->dev.parent);
+	struct glamo_fb_platform_data *mach_info;
+
+	printk(KERN_INFO "SMEDIA Glamo frame buffer driver (C) 2007 "
+		"Openmoko, Inc.\n");
+
+	if (!core->pdata || !core->pdata->fb_data)
+		return -ENOENT;
+
+
+	fbinfo = framebuffer_alloc(sizeof(struct glamofb_handle), &pdev->dev);
+	if (!fbinfo)
+		return -ENOMEM;
+
+
+	glamofb = fbinfo->par;
+	glamofb->fb = fbinfo;
+	glamofb->dev = &pdev->dev;
+
+	glamofb->blank_mode = FB_BLANK_POWERDOWN;
+
+	strcpy(fbinfo->fix.id, "SMedia Glamo");
+
+	glamofb->reg = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						    "glamo-fb-regs");
+	if (!glamofb->reg) {
+		dev_err(&pdev->dev, "platform device with no registers?\n");
+		rc = -ENOENT;
+		goto out_free;
+	}
+
+	glamofb->fb_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+							"glamo-fb-mem");
+	if (!glamofb->fb_res) {
+		dev_err(&pdev->dev, "platform device with no memory ?\n");
+		rc = -ENOENT;
+		goto out_free;
+	}
+
+	glamofb->reg = request_mem_region(glamofb->reg->start,
+					      resource_size(glamofb->reg),
+					      pdev->name);
+	if (!glamofb->reg) {
+		dev_err(&pdev->dev, "failed to request mmio region\n");
+		goto out_free;
+	}
+
+	glamofb->fb_res = request_mem_region(glamofb->fb_res->start,
+						 resource_size(glamofb->fb_res),
+						 pdev->name);
+	if (!glamofb->fb_res) {
+		dev_err(&pdev->dev, "failed to request vram region\n");
+		goto out_release_reg;
+	}
+
+	/* we want to remap only the registers required for this core
+	 * driver. */
+	glamofb->base = ioremap_nocache(glamofb->reg->start,
+					resource_size(glamofb->reg));
+	if (!glamofb->base) {
+		dev_err(&pdev->dev, "failed to ioremap() mmio memory\n");
+		goto out_release_fb;
+	}
+
+	fbinfo->fix.smem_start = (unsigned long) glamofb->fb_res->start;
+	fbinfo->fix.smem_len = (__u32) resource_size(glamofb->fb_res);
+
+	fbinfo->screen_base = ioremap(glamofb->fb_res->start,
+					   resource_size(glamofb->fb_res));
+	if (!fbinfo->screen_base) {
+		dev_err(&pdev->dev, "failed to ioremap() vram memory\n");
+		goto out_release_fb;
+	}
+	glamofb->cursor_addr = fbinfo->screen_base + 0x12C000;
+
+	platform_set_drvdata(pdev, glamofb);
+
+	mach_info = core->pdata->fb_data;
+	glamofb->core = core;
+	glamofb->mach_info = mach_info;
+
+	fbinfo->fix.visual = FB_VISUAL_TRUECOLOR;
+	fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
+	fbinfo->fix.type_aux = 0;
+	fbinfo->fix.xpanstep = 0;
+	fbinfo->fix.ypanstep = 0;
+	fbinfo->fix.ywrapstep = 0;
+	fbinfo->fix.accel = FB_ACCEL_GLAMO;
+
+
+	fbinfo->fbops = &glamofb_ops;
+	fbinfo->flags = FBINFO_FLAG_DEFAULT;
+	fbinfo->pseudo_palette = &glamofb->pseudo_pal;
+
+	fbinfo->mode = mach_info->modes;
+	fb_videomode_to_var(&fbinfo->var, fbinfo->mode);
+	fbinfo->var.bits_per_pixel = 16;
+	fbinfo->var.nonstd = 0;
+	fbinfo->var.activate = FB_ACTIVATE_NOW;
+	fbinfo->var.height = mach_info->height;
+	fbinfo->var.width = mach_info->width;
+	fbinfo->var.accel_flags = 0;
+	fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
+
+	glamo_engine_enable(core, GLAMO_ENGINE_LCD);
+	glamo_engine_reset(core, GLAMO_ENGINE_LCD);
+	glamofb->output_enabled = 1;
+	glamofb->mode_set = 1;
+
+	dev_info(&pdev->dev, "spin_lock_init\n");
+	spin_lock_init(&glamofb->lock_cmd);
+	glamofb_init_regs(glamofb);
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+	glamofb_cursor_onoff(glamofb, 1);
+#endif
+
+	fb_videomode_to_modelist(mach_info->modes, mach_info->num_modes,
+				 &fbinfo->modelist);
+
+	rc = register_framebuffer(fbinfo);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "failed to register framebuffer\n");
+		goto out_unmap_fb;
+	}
+
+	printk(KERN_INFO "fb%d: %s frame buffer device\n",
+		fbinfo->node, fbinfo->fix.id);
+
+	return 0;
+
+out_unmap_fb:
+	iounmap(fbinfo->screen_base);
+	iounmap(glamofb->base);
+out_release_fb:
+	release_mem_region(glamofb->fb_res->start,
+				resource_size(glamofb->fb_res));
+out_release_reg:
+	release_mem_region(glamofb->reg->start,
+				resource_size(glamofb->reg));
+out_free:
+	framebuffer_release(fbinfo);
+	return rc;
+}
+
+static int glamofb_remove(struct platform_device *pdev)
+{
+	struct glamofb_handle *glamofb = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	iounmap(glamofb->base);
+	release_mem_region(glamofb->reg->start, resource_size(glamofb->reg));
+	kfree(glamofb);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int glamofb_suspend(struct device *dev)
+{
+	struct glamofb_handle *gfb = dev_get_drvdata(dev);
+
+	acquire_console_sem();
+	fb_set_suspend(gfb->fb, 1);
+	release_console_sem();
+
+	/* seriously -- nobody is allowed to touch glamo memory when we
+	 * are suspended or we lock on nWAIT
+	 */
+	/* iounmap(gfb->fb->screen_base); */
+
+	return 0;
+}
+
+static int glamofb_resume(struct device *dev)
+{
+	struct glamofb_handle *gfb = dev_get_drvdata(dev);
+
+	/* OK let's allow framebuffer ops again */
+	/* gfb->fb->screen_base = ioremap(gfb->fb_res->start,
+					   resource_size(gfb->fb_res)); */
+	glamo_engine_enable(gfb->core, GLAMO_ENGINE_LCD);
+	glamo_engine_reset(gfb->core, GLAMO_ENGINE_LCD);
+
+	glamofb_init_regs(gfb);
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+	glamofb_cursor_onoff(gfb, 1);
+#endif
+
+	acquire_console_sem();
+	fb_set_suspend(gfb->fb, 0);
+	release_console_sem();
+
+	return 0;
+}
+
+static struct dev_pm_ops glamofb_pm_ops = {
+	.suspend = glamofb_suspend,
+	.resume = glamofb_resume,
+};
+
+#define GLAMOFB_PM_OPS (&glamofb_pm_ops)
+
+#else
+#define GLAMOFB_PM_OPS NULL
+#endif
+
+static struct platform_driver glamofb_driver = {
+	.probe		= glamofb_probe,
+	.remove		= glamofb_remove,
+	.driver		= {
+		.name	= "glamo-fb",
+		.owner	= THIS_MODULE,
+		.pm	= GLAMOFB_PM_OPS
+	},
+};
+
+static int __devinit glamofb_init(void)
+{
+	return platform_driver_register(&glamofb_driver);
+}
+
+static void __exit glamofb_cleanup(void)
+{
+	platform_driver_unregister(&glamofb_driver);
+}
+
+module_init(glamofb_init);
+module_exit(glamofb_cleanup);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Smedia Glamo 336x/337x framebuffer driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/glamo/glamo-gpio.c b/drivers/mfd/glamo/glamo-gpio.c
new file mode 100644
index 00000000000..1bcec99de41
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-gpio.c
@@ -0,0 +1,284 @@
+/* Smedia Glamo 336x/337x gpio driver
+ *
+ * (C) 2009 Lars-Peter Clausen
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio.h>
+#include <linux/mfd/glamo.h>
+
+#include "glamo-core.h"
+#include "glamo-regs.h"
+
+#define GLAMO_NR_GPIO 21
+#define GLAMO_NR_GPIO_REGS DIV_ROUND_UP(GLAMO_NR_GPIO, 4)
+
+#define GLAMO_REG_GPIO(x) (((x) * 2) + GLAMO_REG_GPIO_GEN1)
+
+struct glamo_gpio {
+	struct glamo_core *glamo;
+	struct gpio_chip chip;
+	uint16_t saved_regs[GLAMO_NR_GPIO_REGS];
+};
+
+#define REG_OF_GPIO(gpio)   (GLAMO_REG_GPIO(gpio >> 2))
+#define NUM_OF_GPIO(gpio)	(gpio & 0x3)
+#define DIRECTION_BIT(gpio)	(1 << (NUM_OF_GPIO(gpio) + 0))
+#define OUTPUT_BIT(gpio)	(1 << (NUM_OF_GPIO(gpio) + 4))
+#define INPUT_BIT(gpio)		(1 << (NUM_OF_GPIO(gpio) + 8))
+#define FUNC_BIT(gpio)		(1 << (NUM_OF_GPIO(gpio) + 12))
+
+
+static inline struct glamo_core *chip_to_glamo(struct gpio_chip *chip)
+{
+	return container_of(chip, struct glamo_gpio, chip)->glamo;
+}
+
+static void glamo_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct glamo_core *glamo = chip_to_glamo(chip);
+	unsigned int reg = REG_OF_GPIO(offset);
+	u_int16_t tmp;
+
+	spin_lock(&glamo->lock);
+	tmp = readw(glamo->base + reg);
+	if (value)
+		tmp |= OUTPUT_BIT(offset);
+	else
+		tmp &= ~OUTPUT_BIT(offset);
+	writew(tmp, glamo->base + reg);
+	spin_unlock(&glamo->lock);
+}
+
+static int glamo_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct glamo_core *glamo = chip_to_glamo(chip);
+	return !!(readw(glamo->base + REG_OF_GPIO(offset)) & INPUT_BIT(offset));
+}
+
+static int glamo_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct glamo_core *glamo = chip_to_glamo(chip);
+	unsigned int reg = REG_OF_GPIO(offset);
+	u_int16_t tmp;
+
+	spin_lock(&glamo->lock);
+	tmp = readw(glamo->base + reg);
+	if ((tmp & FUNC_BIT(offset)) == 0) {
+		tmp |= FUNC_BIT(offset);
+		writew(tmp, glamo->base + reg);
+	}
+	spin_unlock(&glamo->lock);
+
+	return 0;
+}
+
+static void glamo_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct glamo_core *glamo = chip_to_glamo(chip);
+	unsigned int reg = REG_OF_GPIO(offset);
+	u_int16_t tmp;
+
+	spin_lock(&glamo->lock);
+	tmp = readw(glamo->base + reg);
+	if ((tmp & FUNC_BIT(offset)) == 1) {
+		tmp &= ~FUNC_BIT(offset);
+		writew(tmp, glamo->base + reg);
+	}
+	spin_unlock(&glamo->lock);
+}
+
+static int glamo_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+						int value)
+{
+	struct glamo_core *glamo = chip_to_glamo(chip);
+	unsigned int reg = REG_OF_GPIO(offset);
+	u_int16_t tmp;
+
+	spin_lock(&glamo->lock);
+	tmp = readw(glamo->base + reg);
+    tmp &= ~DIRECTION_BIT(offset);
+
+	if (value)
+		tmp |= OUTPUT_BIT(offset);
+	else
+		tmp &= ~OUTPUT_BIT(offset);
+
+	writew(tmp, glamo->base + reg);
+	spin_unlock(&glamo->lock);
+
+	return 0;
+}
+
+static int glamo_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct glamo_core *glamo = chip_to_glamo(chip);
+	unsigned int reg = REG_OF_GPIO(offset);
+	u_int16_t tmp;
+
+	spin_lock(&glamo->lock);
+	tmp = readw(glamo->base + reg);
+	if ((tmp & DIRECTION_BIT(offset)) == 0) {
+		tmp |= DIRECTION_BIT(offset);
+		writew(tmp, glamo->base + reg);
+	}
+	spin_unlock(&glamo->lock);
+
+	return 0;
+}
+
+static const struct __devinit gpio_chip glamo_gpio_chip = {
+	.label				= "glamo",
+	.request			= glamo_gpio_request,
+	.free				= glamo_gpio_free,
+	.direction_input	= glamo_gpio_direction_input,
+	.get				= glamo_gpio_get,
+	.direction_output	= glamo_gpio_direction_output,
+	.set				= glamo_gpio_set,
+	.base				= -1,
+	.ngpio				= GLAMO_NR_GPIO,
+	.can_sleep			= 0,
+	.owner             = THIS_MODULE,
+};
+
+static int __devinit glamo_gpio_probe(struct platform_device *pdev)
+{
+	struct glamo_platform_data *pdata = pdev->dev.parent->platform_data;
+	struct glamo_gpio *glamo_gpio;
+	int ret;
+
+	glamo_gpio = kzalloc(sizeof(struct glamo_gpio), GFP_KERNEL);
+	if (!glamo_gpio)
+		return -ENOMEM;
+
+	glamo_gpio->glamo = dev_get_drvdata(pdev->dev.parent);
+	glamo_gpio->chip = glamo_gpio_chip;
+	glamo_gpio->chip.dev = &pdev->dev;
+	if (pdata && pdata->gpio_data)
+		glamo_gpio->chip.base = pdata->gpio_data->base;
+
+	ret = gpiochip_add(&glamo_gpio->chip);
+
+	if (ret) {
+		dev_err(&pdev->dev, "Could not register gpio chip: %d\n", ret);
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, glamo_gpio);
+
+	if (pdata && pdata->gpio_data && pdata->gpio_data->registered)
+		pdata->gpio_data->registered(&pdev->dev);
+
+	return 0;
+err:
+	kfree(glamo_gpio);
+	return ret;
+}
+
+static int __devexit glamo_gpio_remove(struct platform_device *pdev)
+{
+	struct glamo_gpio *glamo_gpio = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = gpiochip_remove(&glamo_gpio->chip);
+	if (!ret)
+		goto done;
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(glamo_gpio);
+
+done:
+	return ret;
+}
+
+#ifdef CONFIG_PM
+
+static int glamo_gpio_suspend(struct device *dev)
+{
+	struct glamo_gpio *glamo_gpio = dev_get_drvdata(dev);
+	struct glamo_core *glamo = glamo_gpio->glamo;
+	uint16_t *saved_regs = glamo_gpio->saved_regs;
+	int i;
+
+	spin_lock(&glamo->lock);
+	for (i = 0; i < GLAMO_NR_GPIO / 4; ++i)
+		saved_regs[i] = readw(glamo->base + GLAMO_REG_GPIO(i));
+	spin_unlock(&glamo->lock);
+
+	return 0;
+}
+
+static int glamo_gpio_resume(struct device *dev)
+{
+	struct glamo_gpio *glamo_gpio = dev_get_drvdata(dev);
+	struct glamo_core *glamo = glamo_gpio->glamo;
+	uint16_t *saved_regs = glamo_gpio->saved_regs;
+	int i;
+
+	spin_lock(&glamo->lock);
+	for (i = 0; i < GLAMO_NR_GPIO_REGS; ++i)
+		writew(saved_regs[i], glamo->base + GLAMO_REG_GPIO(i));
+	spin_unlock(&glamo->lock);
+	return 0;
+}
+
+static const struct dev_pm_ops glamo_pm_ops = {
+	.suspend = glamo_gpio_suspend,
+	.resume  = glamo_gpio_resume,
+	.freeze  = glamo_gpio_suspend,
+	.thaw    = glamo_gpio_resume,
+};
+
+#define GLAMO_GPIO_PM_OPS (&glamo_pm_ops)
+
+#else
+#define GLAMO_GPIO_PM_OPS NULL
+#endif
+
+static struct platform_driver glamo_gpio_driver = {
+	.driver = {
+		.name  = "glamo-gpio",
+		.owner = THIS_MODULE,
+		.pm    = GLAMO_GPIO_PM_OPS,
+	},
+	.probe = glamo_gpio_probe,
+	.remove = __devexit_p(glamo_gpio_remove),
+};
+
+static int __devinit glamo_gpio_init(void)
+{
+	return platform_driver_register(&glamo_gpio_driver);
+}
+module_init(glamo_gpio_init);
+
+static void __exit glamo_gpio_exit(void)
+{
+	platform_driver_unregister(&glamo_gpio_driver);
+}
+module_exit(glamo_gpio_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("GPIO interface for the Glamo multimedia device");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:glamo-gpio");
diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c
new file mode 100644
index 00000000000..34bdbebb9db
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-mci.c
@@ -0,0 +1,1024 @@
+/*
+ *  linux/drivers/mmc/host/glamo-mmc.c - Glamo MMC driver
+ *
+ *  Copyright (C) 2007 Openmoko, Inc,  Andy Green <andy@openmoko.com>
+ *  Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ *  Based on S3C MMC driver that was:
+ *  Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/crc7.h>
+#include <linux/scatterlist.h>
+#include <linux/io.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/mfd/glamo.h>
+
+#include "glamo-core.h"
+#include "glamo-regs.h"
+
+struct glamo_mci_host {
+	struct glamo_mmc_platform_data *pdata;
+	struct platform_device	*pdev;
+	struct glamo_core	*core;
+	struct mmc_host		*mmc;
+	struct resource		*mmio_mem;
+	struct resource		*data_mem;
+	void __iomem		*mmio_base;
+	uint16_t __iomem	*data_base;
+
+	unsigned int irq;
+
+	struct regulator *regulator;
+	struct mmc_request *mrq;
+
+	unsigned int clk_rate;
+
+	unsigned short vdd;
+	char power_mode;
+
+	unsigned char request_counter;
+
+	struct timer_list disable_timer;
+
+	struct work_struct irq_work;
+	struct work_struct read_work;
+
+	unsigned clk_enabled:1;
+};
+
+static void glamo_mci_send_request(struct mmc_host *mmc,
+				    struct mmc_request *mrq);
+static void glamo_mci_send_command(struct glamo_mci_host *host,
+				    struct mmc_command *cmd);
+
+/*
+ * Max SD clock rate
+ *
+ * held at /(3 + 1) due to concerns of 100R recommended series resistor
+ * allows 16MHz @ 4-bit --> 8MBytes/sec raw
+ *
+ * you can override this on kernel commandline using
+ *
+ *   glamo_mci.sd_max_clk=10000000
+ *
+ * for example
+ */
+
+static int sd_max_clk = 21000000;
+module_param(sd_max_clk, int, 0644);
+
+/*
+ * Slow SD clock rate
+ *
+ * you can override this on kernel commandline using
+ *
+ *   glamo_mci.sd_slow_ratio=8
+ *
+ * for example
+ *
+ * platform callback is used to decide effective clock rate, if not
+ * defined then max is used, if defined and returns nonzero, rate is
+ * divided by this factor
+ */
+
+static int sd_slow_ratio = 8;
+module_param(sd_slow_ratio, int, 0644);
+
+/*
+ * Post-power SD clock rate
+ *
+ * you can override this on kernel commandline using
+ *
+ *   glamo_mci.sd_post_power_clock=1000000
+ *
+ * for example
+ *
+ * After changing power to card, clock is held at this rate until first bulk
+ * transfer completes
+ */
+
+static int sd_post_power_clock = 1000000;
+module_param(sd_post_power_clock, int, 0644);
+
+
+static inline void glamo_reg_write(struct glamo_mci_host *glamo,
+				uint16_t reg, uint16_t val)
+{
+	writew(val, glamo->mmio_base + reg);
+}
+
+static inline uint16_t glamo_reg_read(struct glamo_mci_host *glamo,
+				   uint16_t reg)
+{
+	return readw(glamo->mmio_base + reg);
+}
+
+static void glamo_reg_set_bit_mask(struct glamo_mci_host *glamo,
+				uint16_t reg, uint16_t mask,
+				uint16_t val)
+{
+	uint16_t tmp;
+
+	val &= mask;
+
+	tmp = glamo_reg_read(glamo, reg);
+	tmp &= ~mask;
+	tmp |= val;
+	glamo_reg_write(glamo, reg, tmp);
+}
+
+static void glamo_mci_reset(struct glamo_mci_host *host)
+{
+	glamo_engine_reset(host->core, GLAMO_ENGINE_MMC);
+
+	glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1,
+			(uint16_t)(host->data_mem->start));
+	glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2,
+			(uint16_t)(host->data_mem->start >> 16));
+
+	glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1,
+			(uint16_t)(host->data_mem->start));
+	glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2,
+			(uint16_t)(host->data_mem->start >> 16));
+
+}
+
+static void glamo_mci_clock_disable(struct glamo_mci_host *host)
+{
+    glamo_engine_suspend(host->core, GLAMO_ENGINE_MMC);
+}
+
+static void glamo_mci_clock_enable(struct glamo_mci_host *host)
+{
+	del_timer_sync(&host->disable_timer);
+
+    glamo_engine_enable(host->core, GLAMO_ENGINE_MMC);
+}
+
+static void glamo_mci_disable_timer(unsigned long data)
+{
+	struct glamo_mci_host *host = (struct glamo_mci_host *)data;
+	glamo_mci_clock_disable(host);
+}
+
+
+static void do_pio_read(struct glamo_mci_host *host, struct mmc_data *data)
+{
+	struct sg_mapping_iter miter;
+	uint16_t __iomem *from_ptr = host->data_base;
+
+	dev_dbg(&host->pdev->dev, "pio_read():\n");
+
+	sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG);
+
+	while (sg_miter_next(&miter)) {
+		memcpy(miter.addr, from_ptr, miter.length);
+		from_ptr += miter.length >> 1;
+
+		data->bytes_xfered += miter.length;
+	}
+
+	sg_miter_stop(&miter);
+
+	dev_dbg(&host->pdev->dev, "pio_read(): "
+			"complete (no more data).\n");
+}
+
+static void do_pio_write(struct glamo_mci_host *host, struct mmc_data *data)
+{
+	struct sg_mapping_iter miter;
+	uint16_t __iomem *to_ptr = host->data_base;
+
+	dev_dbg(&host->pdev->dev, "pio_write():\n");
+	sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG);
+
+	while (sg_miter_next(&miter)) {
+		memcpy(to_ptr, miter.addr, miter.length);
+		to_ptr += miter.length >> 1;
+
+		data->bytes_xfered += miter.length;
+	}
+
+	sg_miter_stop(&miter);
+	dev_dbg(&host->pdev->dev, "pio_write(): complete\n");
+}
+
+static int glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq)
+{
+	int real_rate = 0;
+
+	if (freq) {
+		glamo_mci_clock_enable(host);
+		real_rate = glamo_engine_reclock(host->core, GLAMO_ENGINE_MMC,
+						freq);
+	} else {
+		glamo_mci_clock_disable(host);
+	}
+
+	return real_rate;
+}
+
+static int glamo_mci_wait_idle(struct glamo_mci_host *host,
+				unsigned long timeout)
+{
+	uint16_t status;
+	do {
+		status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+	} while (!(status & GLAMO_STAT1_MMC_IDLE) && jiffies < timeout);
+
+	if (jiffies >= timeout) {
+		glamo_mci_reset(host);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static void glamo_mci_request_done(struct glamo_mci_host *host, struct
+mmc_request *mrq)
+{
+	mod_timer(&host->disable_timer, jiffies + HZ / 16);
+	mmc_request_done(host->mmc, mrq);
+}
+
+
+static void glamo_mci_irq_worker(struct work_struct *work)
+{
+	struct glamo_mci_host *host = container_of(work, struct glamo_mci_host,
+						    irq_work);
+	struct mmc_request *mrq;
+	struct mmc_command *cmd;
+	uint16_t status;
+
+	if (!host->mrq || !host->mrq->cmd)
+		return;
+
+	mrq = host->mrq;
+	cmd = mrq->cmd;
+
+#if 0
+	if (cmd->data->flags & MMC_DATA_READ)
+		return;
+#endif
+
+	status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+	dev_dbg(&host->pdev->dev, "status = 0x%04x\n", status);
+
+	/* we ignore a data timeout report if we are also told the data came */
+	if (status & GLAMO_STAT1_MMC_RB_DRDY)
+		status &= ~GLAMO_STAT1_MMC_DTOUT;
+
+	if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT))
+		cmd->error = -ETIMEDOUT;
+	else if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR))
+		cmd->error = -EILSEQ;
+
+	if (cmd->error) {
+		dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
+		goto done;
+	}
+
+	/* issue STOP if we have been given one to use */
+	if (mrq->stop)
+		glamo_mci_send_command(host, mrq->stop);
+
+	if (cmd->data->flags & MMC_DATA_READ)
+		do_pio_read(host, cmd->data);
+
+	if (mrq->stop)
+		mrq->stop->error = glamo_mci_wait_idle(host, jiffies + HZ);
+
+done:
+	host->mrq = NULL;
+	glamo_mci_request_done(host, cmd->mrq);
+}
+
+static void glamo_mci_read_worker(struct work_struct *work)
+{
+	struct glamo_mci_host *host = container_of(work, struct glamo_mci_host,
+							read_work);
+	struct mmc_command *cmd;
+	uint16_t status;
+	uint16_t blocks_ready;
+	size_t data_read = 0;
+	size_t data_ready;
+	struct scatterlist *sg;
+	uint16_t __iomem *from_ptr = host->data_base;
+	void *sg_pointer;
+
+
+	cmd = host->mrq->cmd;
+	sg = cmd->data->sg;
+	do {
+		status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+
+		if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT))
+			cmd->error = -ETIMEDOUT;
+		if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR))
+			cmd->error = -EILSEQ;
+		if (cmd->error) {
+			dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n",
+				status);
+			goto done;
+		}
+
+		blocks_ready = glamo_reg_read(host, GLAMO_REG_MMC_RB_BLKCNT);
+		data_ready = blocks_ready * cmd->data->blksz;
+
+		if (data_ready == data_read)
+			yield();
+
+		while (sg && data_read + sg->length <= data_ready) {
+			sg_pointer = page_address(sg_page(sg)) + sg->offset;
+			memcpy(sg_pointer, from_ptr, sg->length);
+			from_ptr += sg->length >> 1;
+
+			data_read += sg->length;
+			sg = sg_next(sg);
+		}
+
+	} while (sg);
+	cmd->data->bytes_xfered = data_read;
+
+	do {
+		status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+	} while (!(status & GLAMO_STAT1_MMC_IDLE));
+
+	if (host->mrq->stop)
+		glamo_mci_send_command(host, host->mrq->stop);
+
+	do {
+		status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+	} while (!(status & GLAMO_STAT1_MMC_IDLE));
+done:
+	host->mrq = NULL;
+	glamo_mci_request_done(host, cmd->mrq);
+}
+
+static irqreturn_t glamo_mci_irq(int irq, void *devid)
+{
+	struct glamo_mci_host *host = (struct glamo_mci_host *)devid;
+	schedule_work(&host->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static void glamo_mci_send_command(struct glamo_mci_host *host,
+				  struct mmc_command *cmd)
+{
+	uint8_t u8a[6];
+	uint16_t fire = 0;
+	unsigned int timeout = 1000000;
+	uint16_t *reg_resp = (uint16_t *)(host->mmio_base + GLAMO_REG_MMC_CMD_RSP1);
+	uint16_t status;
+	int triggers_int = 1;
+
+	/* if we can't do it, reject as busy */
+	if (!(glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1) &
+		 GLAMO_STAT1_MMC_IDLE)) {
+		cmd->error = -EBUSY;
+		return;
+	}
+
+	/* create an array in wire order for CRC computation */
+	u8a[0] = 0x40 | (cmd->opcode & 0x3f);
+	u8a[1] = (uint8_t)(cmd->arg >> 24);
+	u8a[2] = (uint8_t)(cmd->arg >> 16);
+	u8a[3] = (uint8_t)(cmd->arg >> 8);
+	u8a[4] = (uint8_t)cmd->arg;
+	u8a[5] = (crc7(0, u8a, 5) << 1) | 0x01;
+
+	/* issue the wire-order array including CRC in register order */
+	glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG1, ((u8a[4] << 8) | u8a[5]));
+	glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG2, ((u8a[2] << 8) | u8a[3]));
+	glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG3, ((u8a[0] << 8) | u8a[1]));
+
+	/* command index toggle */
+	fire |= (host->request_counter & 1) << 12;
+
+	/* set type of command */
+	switch (mmc_cmd_type(cmd)) {
+	case MMC_CMD_BC:
+		fire |= GLAMO_FIRE_MMC_CMDT_BNR;
+		break;
+	case MMC_CMD_BCR:
+		fire |= GLAMO_FIRE_MMC_CMDT_BR;
+		break;
+	case MMC_CMD_AC:
+		fire |= GLAMO_FIRE_MMC_CMDT_AND;
+		break;
+	case MMC_CMD_ADTC:
+		fire |= GLAMO_FIRE_MMC_CMDT_AD;
+		break;
+	}
+	/*
+	 * if it expects a response, set the type expected
+	 *
+	 * R1, Length  : 48bit, Normal response
+	 * R1b, Length : 48bit, same R1, but added card busy status
+	 * R2, Length  : 136bit (really 128 bits with CRC snipped)
+	 * R3, Length  : 48bit (OCR register value)
+	 * R4, Length  : 48bit, SDIO_OP_CONDITION, Reverse SDIO Card
+	 * R5, Length  : 48bit, IO_RW_DIRECTION, Reverse SDIO Card
+	 * R6, Length  : 48bit (RCA register)
+	 * R7, Length  : 48bit (interface condition, VHS(voltage supplied),
+	 *                     check pattern, CRC7)
+	 */
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_R1: /* same index as R6 and R7 */
+		fire |= GLAMO_FIRE_MMC_RSPT_R1;
+		break;
+	case MMC_RSP_R1B:
+		fire |= GLAMO_FIRE_MMC_RSPT_R1b;
+		break;
+	case MMC_RSP_R2:
+		fire |= GLAMO_FIRE_MMC_RSPT_R2;
+		break;
+	case MMC_RSP_R3:
+		fire |= GLAMO_FIRE_MMC_RSPT_R3;
+		break;
+	/* R4 and R5 supported by chip not defined in linux/mmc/core.h (sdio) */
+	}
+	/*
+	 * From the command index, set up the command class in the host ctrllr
+	 *
+	 * missing guys present on chip but couldn't figure out how to use yet:
+	 *     0x0 "stream read"
+	 *     0x9 "cancel running command"
+	 */
+	switch (cmd->opcode) {
+	case MMC_READ_SINGLE_BLOCK:
+		fire |= GLAMO_FIRE_MMC_CC_SBR; /* single block read */
+		break;
+	case MMC_SWITCH: /* 64 byte payload */
+	case SD_APP_SEND_SCR:
+	case MMC_READ_MULTIPLE_BLOCK:
+		/* we will get an interrupt off this */
+		if (!cmd->mrq->stop) {
+			/* multiblock no stop */
+			fire |= GLAMO_FIRE_MMC_CC_MBRNS;
+		} else {
+			/* multiblock with stop */
+			fire |= GLAMO_FIRE_MMC_CC_MBRS;
+		}
+		break;
+	case MMC_WRITE_BLOCK:
+		fire |= GLAMO_FIRE_MMC_CC_SBW; /* single block write */
+		break;
+	case MMC_WRITE_MULTIPLE_BLOCK:
+		if (cmd->mrq->stop) {
+			/* multiblock with stop */
+			fire |= GLAMO_FIRE_MMC_CC_MBWS;
+		} else {
+			/* multiblock NO stop-- 'RESERVED'? */
+			fire |= GLAMO_FIRE_MMC_CC_MBWNS;
+		}
+		break;
+	case MMC_STOP_TRANSMISSION:
+		fire |= GLAMO_FIRE_MMC_CC_STOP; /* STOP */
+		triggers_int = 0;
+		break;
+	default:
+		fire |= GLAMO_FIRE_MMC_CC_BASIC; /* "basic command" */
+		triggers_int = 0;
+		break;
+	}
+
+	if (cmd->data)
+		host->mrq = cmd->mrq;
+
+	/* always largest timeout */
+	glamo_reg_write(host, GLAMO_REG_MMC_TIMEOUT, 0xfff);
+
+	/* Generate interrupt on txfer */
+	glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC, 0xff36,
+			0x0800 |
+			GLAMO_BASIC_MMC_NO_CLK_RD_WAIT |
+			GLAMO_BASIC_MMC_EN_COMPL_INT |
+			GLAMO_BASIC_MMC_EN_DATA_PUPS |
+			GLAMO_BASIC_MMC_EN_CMD_PUP);
+
+	/* send the command out on the wire */
+	/* dev_info(&host->pdev->dev, "Using FIRE %04X\n", fire); */
+	glamo_reg_write(host, GLAMO_REG_MMC_CMD_FIRE, fire);
+
+	/* we are deselecting card?  because it isn't going to ack then... */
+	if ((cmd->opcode == 7) && (cmd->arg == 0))
+		return;
+
+	/*
+	 * we must spin until response is ready or timed out
+	 * -- we don't get interrupts unless there is a bulk rx
+	 */
+	do
+		status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+	while (((((status >> 15) & 1) != (host->request_counter & 1)) ||
+		(!(status & (GLAMO_STAT1_MMC_RB_RRDY |
+				 GLAMO_STAT1_MMC_RTOUT |
+				 GLAMO_STAT1_MMC_DTOUT |
+				 GLAMO_STAT1_MMC_BWERR |
+				 GLAMO_STAT1_MMC_BRERR)))) && (timeout--));
+
+	if ((status & (GLAMO_STAT1_MMC_RTOUT |
+				   GLAMO_STAT1_MMC_DTOUT)) ||
+		(timeout == 0)) {
+		cmd->error = -ETIMEDOUT;
+	} else if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) {
+		cmd->error = -EILSEQ;
+	}
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
+			cmd->resp[3] = readw(&reg_resp[0]) |
+						   (readw(&reg_resp[1]) << 16);
+			cmd->resp[2] = readw(&reg_resp[2]) |
+						   (readw(&reg_resp[3]) << 16);
+			cmd->resp[1] = readw(&reg_resp[4]) |
+						   (readw(&reg_resp[5]) << 16);
+			cmd->resp[0] = readw(&reg_resp[6]) |
+						   (readw(&reg_resp[7]) << 16);
+		} else {
+			cmd->resp[0] = (readw(&reg_resp[0]) >> 8) |
+					   (readw(&reg_resp[1]) << 8) |
+					   (readw(&reg_resp[2]) << 24);
+		}
+	}
+
+#if 0
+	/* We'll only get an interrupt when all data has been transfered.
+	   By starting to copy data when it's avaiable we can increase
+	   throughput by up to 30%. */
+	if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
+		schedule_work(&host->read_work);
+#endif
+
+}
+
+static int glamo_mci_prepare_pio(struct glamo_mci_host *host,
+				 struct mmc_data *data)
+{
+	/* set up the block info */
+	glamo_reg_write(host, GLAMO_REG_MMC_DATBLKLEN, data->blksz);
+	glamo_reg_write(host, GLAMO_REG_MMC_DATBLKCNT, data->blocks);
+
+	data->bytes_xfered = 0;
+
+	/* if write, prep the write into the shared RAM before the command */
+	if (data->flags & MMC_DATA_WRITE)
+		do_pio_write(host, data);
+
+	dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n",
+				   data->blksz, data->blocks);
+	return 0;
+}
+
+static int glamo_mci_irq_poll(struct glamo_mci_host *host,
+				struct mmc_command *cmd)
+{
+	int timeout = 1000000;
+	uint16_t status;
+	/*
+	 * if the glamo INT# line isn't wired (*cough* it can happen)
+	 * I'm afraid we have to spin on the IRQ status bit and "be
+	 * our own INT# line"
+	 */
+	/*
+	 * we have faith we will get an "interrupt"...
+	 * but something insane like suspend problems can mean
+	 * we spin here forever, so we timeout after a LONG time
+	 */
+	do {
+		status = glamo_reg_read(host, GLAMO_REG_IRQ_STATUS);
+	} while ((--timeout) && !(status & GLAMO_IRQ_MMC));
+
+	if (timeout <= 0) {
+		if (cmd->data->error)
+			cmd->data->error = -ETIMEDOUT;
+		dev_err(&host->pdev->dev, "Payload timeout\n");
+		return -ETIMEDOUT;
+	}
+	/* ack this interrupt source */
+	writew(GLAMO_IRQ_MMC, host->core->base +
+		   GLAMO_REG_IRQ_CLEAR);
+
+	/* yay we are an interrupt controller! -- call the ISR
+	 * it will stop clock to card
+	 */
+	glamo_mci_irq(host->irq, host);
+
+	return 0;
+}
+
+static void glamo_mci_send_request(struct mmc_host *mmc,
+					struct mmc_request *mrq)
+{
+	struct glamo_mci_host *host = mmc_priv(mmc);
+	struct mmc_command *cmd = mrq->cmd;
+
+	glamo_mci_clock_enable(host);
+	host->request_counter++;
+	if (cmd->data) {
+		if (glamo_mci_prepare_pio(host, cmd->data)) {
+			cmd->error = -EIO;
+			cmd->data->error = -EIO;
+			goto done;
+		}
+	}
+
+	dev_dbg(&host->pdev->dev, "cmd 0x%x, "
+		 "arg 0x%x data=%p mrq->stop=%p flags 0x%x\n",
+		 cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop,
+		 cmd->flags);
+
+	glamo_mci_send_command(host, cmd);
+
+	/*
+	 * if we don't have bulk data to take care of, we're done
+	 */
+	if (!cmd->data || cmd->error)
+		goto done;
+
+
+	if (!host->core->irq_works) {
+		if (glamo_mci_irq_poll(host, mrq->cmd))
+			goto done;
+	}
+
+	/*
+	 * Otherwise can can use the interrupt as async completion --
+	 * if there is read data coming, or we wait for write data to complete,
+	 * exit without mmc_request_done() as the payload interrupt
+	 * will service it
+	 */
+	dev_dbg(&host->pdev->dev, "Waiting for payload data\n");
+	return;
+done:
+	if (!cmd->error)
+		cmd->error = glamo_mci_wait_idle(host, jiffies + 2 * HZ);
+	glamo_mci_request_done(host, mrq);
+}
+
+static void glamo_mci_set_power_mode(struct glamo_mci_host *host,
+				unsigned char power_mode)
+{
+	int ret;
+
+	if (power_mode == host->power_mode)
+		return;
+
+	switch (power_mode) {
+	case MMC_POWER_UP:
+		if (host->power_mode == MMC_POWER_OFF) {
+            printk("ENABLE\n");
+			ret = regulator_enable(host->regulator);
+			if (ret)
+				dev_err(&host->pdev->dev,
+					"Failed to enable regulator: %d\n",
+					ret);
+		}
+		break;
+	case MMC_POWER_ON:
+		break;
+	case MMC_POWER_OFF:
+	default:
+        printk("DISABLE\n");
+		glamo_engine_disable(host->core, GLAMO_ENGINE_MMC);
+
+		ret = regulator_disable(host->regulator);
+		if (ret)
+			dev_warn(&host->pdev->dev,
+				"Failed to disable regulator: %d\n",
+				ret);
+		break;
+	}
+	host->power_mode = power_mode;
+}
+
+static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct glamo_mci_host *host = mmc_priv(mmc);
+	int bus_width = 0;
+	int rate;
+	int sd_drive;
+	int ret;
+
+	/* Set power */
+	glamo_mci_set_power_mode(host, ios->power_mode);
+
+	if (host->vdd != ios->vdd) {
+		ret = mmc_regulator_set_ocr(host->regulator, ios->vdd);
+		if (ret)
+			dev_err(&host->pdev->dev,
+				"Failed to set regulator voltage: %d\n", ret);
+		else
+			host->vdd = ios->vdd;
+	}
+	rate = glamo_mci_set_card_clock(host, ios->clock);
+
+	if ((ios->power_mode == MMC_POWER_ON) ||
+		(ios->power_mode == MMC_POWER_UP)) {
+		dev_info(&host->pdev->dev,
+			"powered (vdd = %hu) clk: %dkHz div=%hu (req: %ukHz). "
+			"Bus width=%d\n", ios->vdd,
+			rate / 1000, 0,
+			ios->clock / 1000, (int)ios->bus_width);
+	} else {
+		dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n");
+	}
+
+	/* set bus width */
+	if (ios->bus_width == MMC_BUS_WIDTH_4)
+		bus_width = GLAMO_BASIC_MMC_EN_4BIT_DATA;
+
+	sd_drive = (rate * 4) / host->clk_rate;
+	if (sd_drive > 3)
+		sd_drive = 3;
+
+	glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC,
+				GLAMO_BASIC_MMC_EN_4BIT_DATA | 0xb0,
+						   bus_width | sd_drive << 6);
+}
+
+
+/*
+ * no physical write protect supported by us
+ */
+static int glamo_mci_get_ro(struct mmc_host *mmc)
+{
+	return 0;
+}
+
+static struct mmc_host_ops glamo_mci_ops = {
+	.request	= glamo_mci_send_request,
+	.set_ios	= glamo_mci_set_ios,
+	.get_ro		= glamo_mci_get_ro,
+};
+
+static int glamo_mci_probe(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct glamo_mci_host *host;
+	struct glamo_core *core = dev_get_drvdata(pdev->dev.parent);
+	int ret;
+
+	dev_info(&pdev->dev, "glamo_mci driver (C)2007 Openmoko, Inc\n");
+
+	mmc = mmc_alloc_host(sizeof(struct glamo_mci_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto probe_out;
+	}
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	host->pdev = pdev;
+	if (core->pdata)
+		host->pdata = core->pdata->mmc_data;
+	host->power_mode = MMC_POWER_OFF;
+	host->clk_enabled = 0;
+	host->core = core;
+	host->irq = platform_get_irq(pdev, 0);
+
+	INIT_WORK(&host->irq_work, glamo_mci_irq_worker);
+	INIT_WORK(&host->read_work, glamo_mci_read_worker);
+
+	host->regulator = regulator_get(pdev->dev.parent, "SD_3V3");
+	if (IS_ERR(host->regulator)) {
+		dev_err(&pdev->dev, "Cannot proceed without regulator.\n");
+		ret = PTR_ERR(host->regulator);
+		goto probe_free_host;
+	}
+
+	host->mmio_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!host->mmio_mem) {
+		dev_err(&pdev->dev,
+			"failed to get io memory region resouce.\n");
+		ret = -ENOENT;
+		goto probe_regulator_put;
+	}
+
+	host->mmio_mem = request_mem_region(host->mmio_mem->start,
+						resource_size(host->mmio_mem),
+						pdev->name);
+
+	if (!host->mmio_mem) {
+		dev_err(&pdev->dev, "failed to request io memory region.\n");
+		ret = -ENOENT;
+		goto probe_regulator_put;
+	}
+
+	host->mmio_base = ioremap(host->mmio_mem->start,
+				      resource_size(host->mmio_mem));
+	if (!host->mmio_base) {
+		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
+		ret = -EINVAL;
+		goto probe_free_mem_region_mmio;
+	}
+
+
+	/* Get ahold of our data buffer we use for data in and out on MMC */
+	host->data_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!host->data_mem) {
+		dev_err(&pdev->dev,
+			"failed to get io memory region resource.\n");
+		ret = -ENOENT;
+		goto probe_iounmap_mmio;
+	}
+
+	host->data_mem = request_mem_region(host->data_mem->start,
+						resource_size(host->data_mem),
+						pdev->name);
+
+	if (!host->data_mem) {
+		dev_err(&pdev->dev, "failed to request io memory region.\n");
+		ret = -ENOENT;
+		goto probe_iounmap_mmio;
+	}
+	host->data_base = ioremap(host->data_mem->start,
+				      resource_size(host->data_mem));
+
+	if (host->data_base == 0) {
+		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
+		ret = -EINVAL;
+		goto probe_free_mem_region_data;
+	}
+
+	ret = request_irq(host->irq, glamo_mci_irq, IRQF_SHARED,
+			   pdev->name, host);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register irq.\n");
+		goto probe_iounmap_data;
+	}
+
+
+	host->vdd = 0;
+	host->clk_rate = glamo_pll_rate(host->core, GLAMO_PLL1);
+
+	/* explain our host controller capabilities */
+	mmc->ops	= &glamo_mci_ops;
+	mmc->ocr_avail	= mmc_regulator_get_ocrmask(host->regulator);
+	mmc->caps	= MMC_CAP_4_BIT_DATA |
+			    MMC_CAP_MMC_HIGHSPEED |
+			    MMC_CAP_SD_HIGHSPEED;
+	mmc->f_min	= host->clk_rate / 256;
+	mmc->f_max	= sd_max_clk;
+
+	mmc->max_blk_count = (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */
+	mmc->max_blk_size  = (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */
+	mmc->max_req_size  = resource_size(host->data_mem);
+	mmc->max_seg_size  = mmc->max_req_size;
+	mmc->max_phys_segs = 128;
+	mmc->max_hw_segs   = 128;
+
+	if (mmc->ocr_avail < 0) {
+		dev_warn(&pdev->dev,
+			"Failed to get ocr list for regulator: %d.\n",
+			mmc->ocr_avail);
+		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	}
+
+	platform_set_drvdata(pdev, mmc);
+
+	glamo_engine_enable(host->core, GLAMO_ENGINE_MMC);
+	glamo_mci_reset(host);
+	glamo_engine_disable(host->core, GLAMO_ENGINE_MMC);
+
+	setup_timer(&host->disable_timer, glamo_mci_disable_timer,
+				(unsigned long)host);
+
+	ret = mmc_add_host(mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add mmc host.\n");
+		goto probe_freeirq;
+	}
+
+	return 0;
+
+probe_freeirq:
+	free_irq(host->irq, host);
+probe_iounmap_data:
+	iounmap(host->data_base);
+probe_free_mem_region_data:
+	release_mem_region(host->data_mem->start,
+				resource_size(host->data_mem));
+probe_iounmap_mmio:
+	iounmap(host->mmio_base);
+probe_free_mem_region_mmio:
+	release_mem_region(host->mmio_mem->start,
+				resource_size(host->mmio_mem));
+probe_regulator_put:
+	regulator_put(host->regulator);
+probe_free_host:
+	mmc_free_host(mmc);
+probe_out:
+	return ret;
+}
+
+static int glamo_mci_remove(struct platform_device *pdev)
+{
+	struct mmc_host	*mmc = platform_get_drvdata(pdev);
+	struct glamo_mci_host *host = mmc_priv(mmc);
+
+	free_irq(host->irq, host);
+
+	mmc_remove_host(mmc);
+	iounmap(host->mmio_base);
+	iounmap(host->data_base);
+	release_mem_region(host->mmio_mem->start,
+				resource_size(host->mmio_mem));
+	release_mem_region(host->data_mem->start,
+				resource_size(host->data_mem));
+
+	regulator_put(host->regulator);
+
+	mmc_free_host(mmc);
+
+	glamo_engine_disable(host->core, GLAMO_ENGINE_MMC);
+	return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+static int glamo_mci_suspend(struct device *dev)
+{
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct glamo_mci_host *host = mmc_priv(mmc);
+	int ret;
+
+	cancel_work_sync(&host->irq_work);
+
+	ret = mmc_suspend_host(mmc, PMSG_SUSPEND);
+
+	return ret;
+}
+
+static int glamo_mci_resume(struct device *dev)
+{
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct glamo_mci_host *host = mmc_priv(mmc);
+	int ret;
+
+
+	glamo_mci_reset(host);
+	glamo_engine_enable(host->core, GLAMO_ENGINE_MMC);
+    mdelay(10);
+
+	ret = mmc_resume_host(host->mmc);
+
+	return 0;
+}
+
+static struct dev_pm_ops glamo_mci_pm_ops = {
+	.suspend    = glamo_mci_suspend,
+	.resume     = glamo_mci_resume,
+    .freeze     = glamo_mci_suspend,
+    .thaw       = glamo_mci_resume,
+};
+#define GLAMO_MCI_PM_OPS (&glamo_mci_pm_ops)
+
+#else /* CONFIG_PM */
+#define GLAMO_MCI_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+
+static struct platform_driver glamo_mci_driver = {
+	.probe  = glamo_mci_probe,
+	.remove = glamo_mci_remove,
+	.driver = {
+		.name	= "glamo-mci",
+		.owner	= THIS_MODULE,
+		.pm	= GLAMO_MCI_PM_OPS,
+	},
+};
+
+static int __init glamo_mci_init(void)
+{
+	platform_driver_register(&glamo_mci_driver);
+	return 0;
+}
+module_init(glamo_mci_init);
+
+static void __exit glamo_mci_exit(void)
+{
+	platform_driver_unregister(&glamo_mci_driver);
+}
+module_exit(glamo_mci_exit);
+
+MODULE_DESCRIPTION("Glamo MMC/SD Card Interface driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
diff --git a/drivers/mfd/glamo/glamo-regs.h b/drivers/mfd/glamo/glamo-regs.h
new file mode 100644
index 00000000000..59848e1122e
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-regs.h
@@ -0,0 +1,630 @@
+#ifndef _GLAMO_REGS_H
+#define _GLAMO_REGS_H
+
+/* Smedia Glamo 336x/337x driver
+ *
+ * (C) 2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+enum glamo_regster_offsets {
+	GLAMO_REGOFS_GENERIC	= 0x0000,
+	GLAMO_REGOFS_HOSTBUS	= 0x0200,
+	GLAMO_REGOFS_MEMORY	= 0x0300,
+	GLAMO_REGOFS_VIDCAP	= 0x0400,
+	GLAMO_REGOFS_ISP	= 0x0500,
+	GLAMO_REGOFS_JPEG	= 0x0800,
+	GLAMO_REGOFS_MPEG	= 0x0c00,
+	GLAMO_REGOFS_LCD	= 0x1100,
+	GLAMO_REGOFS_MMC	= 0x1400,
+	GLAMO_REGOFS_MPROC0	= 0x1500,
+	GLAMO_REGOFS_MPROC1	= 0x1580,
+	GLAMO_REGOFS_CMDQUEUE	= 0x1600,
+	GLAMO_REGOFS_RISC	= 0x1680,
+	GLAMO_REGOFS_2D		= 0x1700,
+	GLAMO_REGOFS_3D		= 0x1b00,
+	GLAMO_REGOFS_END	= 0x2400,
+};
+
+
+enum glamo_register_generic {
+	GLAMO_REG_GCONF1	= 0x0000,
+	GLAMO_REG_GCONF2	= 0x0002,
+#define	GLAMO_REG_DEVICE_ID	GLAMO_REG_GCONF2
+	GLAMO_REG_GCONF3	= 0x0004,
+#define	GLAMO_REG_REVISION_ID	GLAMO_REG_GCONF3
+	GLAMO_REG_IRQ_GEN1	= 0x0006,
+#define GLAMO_REG_IRQ_ENABLE	GLAMO_REG_IRQ_GEN1
+	GLAMO_REG_IRQ_GEN2	= 0x0008,
+#define GLAMO_REG_IRQ_SET	GLAMO_REG_IRQ_GEN2
+	GLAMO_REG_IRQ_GEN3	= 0x000a,
+#define GLAMO_REG_IRQ_CLEAR	GLAMO_REG_IRQ_GEN3
+	GLAMO_REG_IRQ_GEN4	= 0x000c,
+#define GLAMO_REG_IRQ_STATUS	GLAMO_REG_IRQ_GEN4
+	GLAMO_REG_CLOCK_HOST	= 0x0010,
+	GLAMO_REG_CLOCK_MEMORY	= 0x0012,
+	GLAMO_REG_CLOCK_LCD	= 0x0014,
+	GLAMO_REG_CLOCK_MMC	= 0x0016,
+	GLAMO_REG_CLOCK_ISP	= 0x0018,
+	GLAMO_REG_CLOCK_JPEG	= 0x001a,
+	GLAMO_REG_CLOCK_3D	= 0x001c,
+	GLAMO_REG_CLOCK_2D	= 0x001e,
+	GLAMO_REG_CLOCK_RISC1	= 0x0020,	/* 3365 only? */
+	GLAMO_REG_CLOCK_RISC2	= 0x0022,	/* 3365 only? */
+	GLAMO_REG_CLOCK_MPEG	= 0x0024,
+	GLAMO_REG_CLOCK_MPROC	= 0x0026,
+
+	GLAMO_REG_CLOCK_GEN5_1	= 0x0030,
+	GLAMO_REG_CLOCK_GEN5_2	= 0x0032,
+	GLAMO_REG_CLOCK_GEN6	= 0x0034,
+	GLAMO_REG_CLOCK_GEN7	= 0x0036,
+	GLAMO_REG_CLOCK_GEN8	= 0x0038,
+	GLAMO_REG_CLOCK_GEN9	= 0x003a,
+	GLAMO_REG_CLOCK_GEN10	= 0x003c,
+	GLAMO_REG_CLOCK_GEN11	= 0x003e,
+	GLAMO_REG_PLL_GEN1	= 0x0040,
+	GLAMO_REG_PLL_GEN2	= 0x0042,
+	GLAMO_REG_PLL_GEN3	= 0x0044,
+	GLAMO_REG_PLL_GEN4	= 0x0046,
+	GLAMO_REG_PLL_GEN5	= 0x0048,
+	GLAMO_REG_GPIO_GEN1	= 0x0050,
+	GLAMO_REG_GPIO_GEN2	= 0x0052,
+	GLAMO_REG_GPIO_GEN3	= 0x0054,
+	GLAMO_REG_GPIO_GEN4	= 0x0056,
+	GLAMO_REG_GPIO_GEN5	= 0x0058,
+	GLAMO_REG_GPIO_GEN6	= 0x005a,
+	GLAMO_REG_GPIO_GEN7	= 0x005c,
+	GLAMO_REG_GPIO_GEN8	= 0x005e,
+	GLAMO_REG_GPIO_GEN9	= 0x0060,
+	GLAMO_REG_GPIO_GEN10	= 0x0062,
+	GLAMO_REG_DFT_GEN1	= 0x0070,
+	GLAMO_REG_DFT_GEN2	= 0x0072,
+	GLAMO_REG_DFT_GEN3	= 0x0074,
+	GLAMO_REG_DFT_GEN4	= 0x0076,
+
+	GLAMO_REG_DFT_GEN5	= 0x01e0,
+	GLAMO_REG_DFT_GEN6	= 0x01f0,
+};
+
+#define GLAMO_REG_HOSTBUS(x)	(GLAMO_REGOFS_HOSTBUS-2+(x*2))
+
+#define REG_MEM(x)		(GLAMO_REGOFS_MEMORY+(x))
+#define GLAMO_REG_MEM_TIMING(x)	(GLAMO_REG_MEM_TIMING1-2+(x*2))
+
+enum glamo_register_mem {
+	GLAMO_REG_MEM_TYPE	= REG_MEM(0x00),
+	GLAMO_REG_MEM_GEN	= REG_MEM(0x02),
+	GLAMO_REG_MEM_TIMING1	= REG_MEM(0x04),
+	GLAMO_REG_MEM_TIMING2	= REG_MEM(0x06),
+	GLAMO_REG_MEM_TIMING3	= REG_MEM(0x08),
+	GLAMO_REG_MEM_TIMING4	= REG_MEM(0x0a),
+	GLAMO_REG_MEM_TIMING5	= REG_MEM(0x0c),
+	GLAMO_REG_MEM_TIMING6	= REG_MEM(0x0e),
+	GLAMO_REG_MEM_TIMING7	= REG_MEM(0x10),
+	GLAMO_REG_MEM_TIMING8	= REG_MEM(0x12),
+	GLAMO_REG_MEM_TIMING9	= REG_MEM(0x14),
+	GLAMO_REG_MEM_TIMING10	= REG_MEM(0x16),
+	GLAMO_REG_MEM_TIMING11	= REG_MEM(0x18),
+	GLAMO_REG_MEM_POWER1	= REG_MEM(0x1a),
+	GLAMO_REG_MEM_POWER2	= REG_MEM(0x1c),
+	GLAMO_REG_MEM_LCD_BUF1	= REG_MEM(0x1e),
+	GLAMO_REG_MEM_LCD_BUF2	= REG_MEM(0x20),
+	GLAMO_REG_MEM_LCD_BUF3	= REG_MEM(0x22),
+	GLAMO_REG_MEM_LCD_BUF4	= REG_MEM(0x24),
+	GLAMO_REG_MEM_BIST1	= REG_MEM(0x26),
+	GLAMO_REG_MEM_BIST2	= REG_MEM(0x28),
+	GLAMO_REG_MEM_BIST3	= REG_MEM(0x2a),
+	GLAMO_REG_MEM_BIST4	= REG_MEM(0x2c),
+	GLAMO_REG_MEM_BIST5	= REG_MEM(0x2e),
+	GLAMO_REG_MEM_MAH1	= REG_MEM(0x30),
+	GLAMO_REG_MEM_MAH2	= REG_MEM(0x32),
+	GLAMO_REG_MEM_DRAM1	= REG_MEM(0x34),
+	GLAMO_REG_MEM_DRAM2	= REG_MEM(0x36),
+	GLAMO_REG_MEM_CRC	= REG_MEM(0x38),
+};
+
+#define GLAMO_MEM_TYPE_MASK	0x03
+
+enum glamo_reg_mem_dram1 {
+	/* b0 - b10 == refresh period, 1 -> 2048 clocks */
+	GLAMO_MEM_DRAM1_EN_GATE_CLK	= (1 << 11),
+	GLAMO_MEM_DRAM1_SELF_REFRESH	= (1 << 12),
+	GLAMO_MEM_DRAM1_EN_GATE_CKE	= (1 << 13),
+	GLAMO_MEM_DRAM1_EN_DRAM_REFRESH	= (1 << 14),
+	GLAMO_MEM_DRAM1_EN_MODEREG_SET	= (1 << 15),
+};
+
+enum glamo_reg_mem_dram2 {
+	GLAMO_MEM_DRAM2_DEEP_PWRDOWN	= (1 << 12),
+};
+
+enum glamo_irq_index {
+	GLAMO_IRQIDX_HOSTBUS	= 0,
+	GLAMO_IRQIDX_JPEG	= 1,
+	GLAMO_IRQIDX_MPEG	= 2,
+	GLAMO_IRQIDX_MPROC1	= 3,
+	GLAMO_IRQIDX_MPROC0	= 4,
+	GLAMO_IRQIDX_CMDQUEUE	= 5,
+	GLAMO_IRQIDX_2D		= 6,
+	GLAMO_IRQIDX_MMC	= 7,
+	GLAMO_IRQIDX_RISC	= 8,
+};
+
+enum glamo_irq {
+	GLAMO_IRQ_HOSTBUS	= (1 << GLAMO_IRQIDX_HOSTBUS),
+	GLAMO_IRQ_JPEG		= (1 << GLAMO_IRQIDX_JPEG),
+	GLAMO_IRQ_MPEG		= (1 << GLAMO_IRQIDX_MPEG),
+	GLAMO_IRQ_MPROC1	= (1 << GLAMO_IRQIDX_MPROC1),
+	GLAMO_IRQ_MPROC0	= (1 << GLAMO_IRQIDX_MPROC0),
+	GLAMO_IRQ_CMDQUEUE	= (1 << GLAMO_IRQIDX_CMDQUEUE),
+	GLAMO_IRQ_2D		= (1 << GLAMO_IRQIDX_2D),
+	GLAMO_IRQ_MMC		= (1 << GLAMO_IRQIDX_MMC),
+	GLAMO_IRQ_RISC		= (1 << GLAMO_IRQIDX_RISC),
+};
+
+enum glamo_reg_clock_host {
+	GLAMO_CLOCK_HOST_DG_BCLK	= 0x0001,
+	GLAMO_CLOCK_HOST_DG_M0CLK	= 0x0004,
+	GLAMO_CLOCK_HOST_RESET		= 0x1000,
+};
+
+enum glamo_reg_clock_mem {
+	GLAMO_CLOCK_MEM_DG_M1CLK	= 0x0001,
+	GLAMO_CLOCK_MEM_EN_M1CLK	= 0x0002,
+	GLAMO_CLOCK_MEM_DG_MOCACLK	= 0x0004,
+	GLAMO_CLOCK_MEM_EN_MOCACLK	= 0x0008,
+	GLAMO_CLOCK_MEM_RESET		= 0x1000,
+	GLAMO_CLOCK_MOCA_RESET		= 0x2000,
+};
+
+enum glamo_reg_clock_lcd {
+	GLAMO_CLOCK_LCD_DG_DCLK		= 0x0001,
+	GLAMO_CLOCK_LCD_EN_DCLK		= 0x0002,
+	GLAMO_CLOCK_LCD_DG_DMCLK	= 0x0004,
+	GLAMO_CLOCK_LCD_EN_DMCLK	= 0x0008,
+	GLAMO_CLOCK_LCD_EN_DHCLK	= 0x0020,
+	GLAMO_CLOCK_LCD_DG_M5CLK	= 0x0040,
+	GLAMO_CLOCK_LCD_EN_M5CLK	= 0x0080,
+	GLAMO_CLOCK_LCD_RESET		= 0x1000,
+};
+
+enum glamo_reg_clock_mmc {
+	GLAMO_CLOCK_MMC_DG_TCLK		= 0x0001,
+	GLAMO_CLOCK_MMC_EN_TCLK		= 0x0002,
+	GLAMO_CLOCK_MMC_DG_M9CLK	= 0x0004,
+	GLAMO_CLOCK_MMC_EN_M9CLK	= 0x0008,
+	GLAMO_CLOCK_MMC_RESET		= 0x1000,
+};
+
+enum glamo_reg_basic_mmc {
+	/* set to disable CRC error rejection */
+	GLAMO_BASIC_MMC_DISABLE_CRC	= 0x0001,
+	/* enable completion interrupt */
+	GLAMO_BASIC_MMC_EN_COMPL_INT	= 0x0002,
+	/* stop MMC clock while enforced idle waiting for data from card */
+	GLAMO_BASIC_MMC_NO_CLK_RD_WAIT	= 0x0004,
+	/* 0 = 1-bit bus to card, 1 = use 4-bit bus (has to be negotiated) */
+	GLAMO_BASIC_MMC_EN_4BIT_DATA	= 0x0008,
+	/* enable 75K pullups on D3..D0 */
+	GLAMO_BASIC_MMC_EN_DATA_PUPS	= 0x0010,
+	/* enable 75K pullup on CMD */
+	GLAMO_BASIC_MMC_EN_CMD_PUP	= 0x0020,
+	/* IO drive strength 00=weak -> 11=strongest */
+	GLAMO_BASIC_MMC_EN_DR_STR0	= 0x0040,
+	GLAMO_BASIC_MMC_EN_DR_STR1	= 0x0080,
+	/* TCLK delay stage A, 0000 = 500ps --> 1111 = 8ns */
+	GLAMO_BASIC_MMC_EN_TCLK_DLYA0	= 0x0100,
+	GLAMO_BASIC_MMC_EN_TCLK_DLYA1	= 0x0200,
+	GLAMO_BASIC_MMC_EN_TCLK_DLYA2	= 0x0400,
+	GLAMO_BASIC_MMC_EN_TCLK_DLYA3	= 0x0800,
+	/* TCLK delay stage B (cumulative), 0000 = 500ps --> 1111 = 8ns */
+	GLAMO_BASIC_MMC_EN_TCLK_DLYB0	= 0x1000,
+	GLAMO_BASIC_MMC_EN_TCLK_DLYB1	= 0x2000,
+	GLAMO_BASIC_MMC_EN_TCLK_DLYB2	= 0x4000,
+	GLAMO_BASIC_MMC_EN_TCLK_DLYB3	= 0x8000,
+};
+
+enum glamo_reg_stat1_mmc {
+	/* command "counter" (really: toggle) */
+	GLAMO_STAT1_MMC_CMD_CTR	= 0x8000,
+	/* engine is idle */
+	GLAMO_STAT1_MMC_IDLE	= 0x4000,
+	/* readback response is ready */
+	GLAMO_STAT1_MMC_RB_RRDY	= 0x0200,
+	/* readback data is ready */
+	GLAMO_STAT1_MMC_RB_DRDY	= 0x0100,
+	/* no response timeout */
+	GLAMO_STAT1_MMC_RTOUT	= 0x0020,
+	/* no data timeout */
+	GLAMO_STAT1_MMC_DTOUT	= 0x0010,
+	/* CRC error on block write */
+	GLAMO_STAT1_MMC_BWERR	= 0x0004,
+	/* CRC error on block read */
+	GLAMO_STAT1_MMC_BRERR	= 0x0002
+};
+
+enum glamo_reg_fire_mmc {
+	/* command "counter" (really: toggle)
+	 * the STAT1 register reflects this so you can ensure you don't look
+	 * at status for previous command
+	 */
+	GLAMO_FIRE_MMC_CMD_CTR	= 0x8000,
+	/* sets kind of response expected */
+	GLAMO_FIRE_MMC_RES_MASK	= 0x0700,
+	/* sets command type */
+	GLAMO_FIRE_MMC_TYP_MASK	= 0x00C0,
+	/* sets command class */
+	GLAMO_FIRE_MMC_CLS_MASK	= 0x000F,
+};
+
+enum glamo_fire_mmc_response_types {
+	GLAMO_FIRE_MMC_RSPT_R1	= 0x0000,
+	GLAMO_FIRE_MMC_RSPT_R1b	= 0x0100,
+	GLAMO_FIRE_MMC_RSPT_R2	= 0x0200,
+	GLAMO_FIRE_MMC_RSPT_R3	= 0x0300,
+	GLAMO_FIRE_MMC_RSPT_R4	= 0x0400,
+	GLAMO_FIRE_MMC_RSPT_R5	= 0x0500,
+};
+
+enum glamo_fire_mmc_command_types {
+	/* broadcast, no response */
+	GLAMO_FIRE_MMC_CMDT_BNR	= 0x0000,
+	/* broadcast, with response */
+	GLAMO_FIRE_MMC_CMDT_BR	= 0x0040,
+	/* addressed, no data */
+	GLAMO_FIRE_MMC_CMDT_AND	= 0x0080,
+	/* addressed, with data */
+	GLAMO_FIRE_MMC_CMDT_AD	= 0x00C0,
+};
+
+enum glamo_fire_mmc_command_class {
+	/* "Stream Read" */
+	GLAMO_FIRE_MMC_CC_STRR	= 0x0000,
+	/* Single Block Read */
+	GLAMO_FIRE_MMC_CC_SBR	= 0x0001,
+	/* Multiple Block Read With Stop */
+	GLAMO_FIRE_MMC_CC_MBRS	= 0x0002,
+	/* Multiple Block Read No Stop */
+	GLAMO_FIRE_MMC_CC_MBRNS	= 0x0003,
+	/* RESERVED for "Stream Write" */
+	GLAMO_FIRE_MMC_CC_STRW	= 0x0004,
+	/* "Stream Write" */
+	GLAMO_FIRE_MMC_CC_SBW	= 0x0005,
+	/* RESERVED for Multiple Block Write With Stop */
+	GLAMO_FIRE_MMC_CC_MBWS	= 0x0006,
+	/* Multiple Block Write No Stop */
+	GLAMO_FIRE_MMC_CC_MBWNS	= 0x0007,
+	/* STOP command */
+	GLAMO_FIRE_MMC_CC_STOP	= 0x0008,
+	/* Cancel on Running Command */
+	GLAMO_FIRE_MMC_CC_CANCL	= 0x0009,
+	/* "Basic Command" */
+	GLAMO_FIRE_MMC_CC_BASIC	= 0x000a,
+};
+
+/* these are offsets from the start of the MMC register region */
+enum glamo_register_mmc {
+	/* MMC command, b15..8 = cmd arg b7..0; b7..1 = CRC; b0 = end bit */
+	GLAMO_REG_MMC_CMD_REG1	= 0x00,
+	/* MMC command, b15..0 = cmd arg b23 .. 8 */
+	GLAMO_REG_MMC_CMD_REG2	= 0x02,
+	/* MMC command, b15=start, b14=transmission,
+	 * b13..8=cmd idx, b7..0=cmd arg b31..24
+	 */
+	GLAMO_REG_MMC_CMD_REG3	= 0x04,
+	GLAMO_REG_MMC_CMD_FIRE	= 0x06,
+	GLAMO_REG_MMC_CMD_RSP1	= 0x10,
+	GLAMO_REG_MMC_CMD_RSP2	= 0x12,
+	GLAMO_REG_MMC_CMD_RSP3	= 0x14,
+	GLAMO_REG_MMC_CMD_RSP4	= 0x16,
+	GLAMO_REG_MMC_CMD_RSP5	= 0x18,
+	GLAMO_REG_MMC_CMD_RSP6	= 0x1a,
+	GLAMO_REG_MMC_CMD_RSP7	= 0x1c,
+	GLAMO_REG_MMC_CMD_RSP8	= 0x1e,
+	GLAMO_REG_MMC_RB_STAT1	= 0x20,
+	GLAMO_REG_MMC_RB_BLKCNT	= 0x22,
+	GLAMO_REG_MMC_RB_BLKLEN	= 0x24,
+	GLAMO_REG_MMC_BASIC	= 0x30,
+	GLAMO_REG_MMC_RDATADS1	= 0x34,
+	GLAMO_REG_MMC_RDATADS2	= 0x36,
+	GLAMO_REG_MMC_WDATADS1	= 0x38,
+	GLAMO_REG_MMC_WDATADS2	= 0x3a,
+	GLAMO_REG_MMC_DATBLKCNT	= 0x3c,
+	GLAMO_REG_MMC_DATBLKLEN	= 0x3e,
+	GLAMO_REG_MMC_TIMEOUT	= 0x40,
+
+};
+
+enum glamo_reg_clock_isp {
+	GLAMO_CLOCK_ISP_DG_I1CLK	= 0x0001,
+	GLAMO_CLOCK_ISP_EN_I1CLK	= 0x0002,
+	GLAMO_CLOCK_ISP_DG_CCLK		= 0x0004,
+	GLAMO_CLOCK_ISP_EN_CCLK		= 0x0008,
+	GLAMO_CLOCK_ISP_EN_SCLK		= 0x0020,
+	GLAMO_CLOCK_ISP_DG_M2CLK	= 0x0040,
+	GLAMO_CLOCK_ISP_EN_M2CLK	= 0x0080,
+	GLAMO_CLOCK_ISP_DG_M15CLK	= 0x0100,
+	GLAMO_CLOCK_ISP_EN_M15CLK	= 0x0200,
+	GLAMO_CLOCK_ISP1_RESET		= 0x1000,
+	GLAMO_CLOCK_ISP2_RESET		= 0x2000,
+};
+
+enum glamo_reg_clock_jpeg {
+	GLAMO_CLOCK_JPEG_DG_JCLK	= 0x0001,
+	GLAMO_CLOCK_JPEG_EN_JCLK	= 0x0002,
+	GLAMO_CLOCK_JPEG_DG_M3CLK	= 0x0004,
+	GLAMO_CLOCK_JPEG_EN_M3CLK	= 0x0008,
+	GLAMO_CLOCK_JPEG_RESET		= 0x1000,
+};
+
+enum glamo_reg_clock_2d {
+	GLAMO_CLOCK_2D_DG_GCLK		= 0x0001,
+	GLAMO_CLOCK_2D_EN_GCLK		= 0x0002,
+	GLAMO_CLOCK_2D_DG_M7CLK		= 0x0004,
+	GLAMO_CLOCK_2D_EN_M7CLK		= 0x0008,
+	GLAMO_CLOCK_2D_DG_M6CLK		= 0x0010,
+	GLAMO_CLOCK_2D_EN_M6CLK		= 0x0020,
+	GLAMO_CLOCK_2D_RESET		= 0x1000,
+	GLAMO_CLOCK_2D_CQ_RESET		= 0x2000,
+};
+
+enum glamo_reg_clock_3d {
+	GLAMO_CLOCK_3D_DG_ECLK		= 0x0001,
+	GLAMO_CLOCK_3D_EN_ECLK		= 0x0002,
+	GLAMO_CLOCK_3D_DG_RCLK		= 0x0004,
+	GLAMO_CLOCK_3D_EN_RCLK		= 0x0008,
+	GLAMO_CLOCK_3D_DG_M8CLK		= 0x0010,
+	GLAMO_CLOCK_3D_EN_M8CLK		= 0x0020,
+	GLAMO_CLOCK_3D_BACK_RESET	= 0x1000,
+	GLAMO_CLOCK_3D_FRONT_RESET	= 0x2000,
+};
+
+enum glamo_reg_clock_mpeg {
+	GLAMO_CLOCK_MPEG_DG_X0CLK	= 0x0001,
+	GLAMO_CLOCK_MPEG_EN_X0CLK	= 0x0002,
+	GLAMO_CLOCK_MPEG_DG_X1CLK	= 0x0004,
+	GLAMO_CLOCK_MPEG_EN_X1CLK	= 0x0008,
+	GLAMO_CLOCK_MPEG_DG_X2CLK	= 0x0010,
+	GLAMO_CLOCK_MPEG_EN_X2CLK	= 0x0020,
+	GLAMO_CLOCK_MPEG_DG_X3CLK	= 0x0040,
+	GLAMO_CLOCK_MPEG_EN_X3CLK	= 0x0080,
+	GLAMO_CLOCK_MPEG_DG_X4CLK	= 0x0100,
+	GLAMO_CLOCK_MPEG_EN_X4CLK	= 0x0200,
+	GLAMO_CLOCK_MPEG_DG_X6CLK	= 0x0400,
+	GLAMO_CLOCK_MPEG_EN_X6CLK	= 0x0800,
+	GLAMO_CLOCK_MPEG_ENC_RESET	= 0x1000,
+	GLAMO_CLOCK_MPEG_DEC_RESET	= 0x2000,
+};
+
+enum glamo_reg_clock51 {
+	GLAMO_CLOCK_GEN51_EN_DIV_MCLK	= 0x0001,
+	GLAMO_CLOCK_GEN51_EN_DIV_SCLK	= 0x0002,
+	GLAMO_CLOCK_GEN51_EN_DIV_JCLK	= 0x0004,
+	GLAMO_CLOCK_GEN51_EN_DIV_DCLK	= 0x0008,
+	GLAMO_CLOCK_GEN51_EN_DIV_DMCLK	= 0x0010,
+	GLAMO_CLOCK_GEN51_EN_DIV_DHCLK	= 0x0020,
+	GLAMO_CLOCK_GEN51_EN_DIV_GCLK	= 0x0040,
+	GLAMO_CLOCK_GEN51_EN_DIV_TCLK	= 0x0080,
+	/* FIXME: higher bits */
+};
+
+enum glamo_reg_hostbus2 {
+	GLAMO_HOSTBUS2_MMIO_EN_ISP	= 0x0001,
+	GLAMO_HOSTBUS2_MMIO_EN_JPEG	= 0x0002,
+	GLAMO_HOSTBUS2_MMIO_EN_MPEG	= 0x0004,
+	GLAMO_HOSTBUS2_MMIO_EN_LCD	= 0x0008,
+	GLAMO_HOSTBUS2_MMIO_EN_MMC	= 0x0010,
+	GLAMO_HOSTBUS2_MMIO_EN_MICROP0	= 0x0020,
+	GLAMO_HOSTBUS2_MMIO_EN_MICROP1	= 0x0040,
+	GLAMO_HOSTBUS2_MMIO_EN_CQ	= 0x0080,
+	GLAMO_HOSTBUS2_MMIO_EN_RISC	= 0x0100,
+	GLAMO_HOSTBUS2_MMIO_EN_2D	= 0x0200,
+	GLAMO_HOSTBUS2_MMIO_EN_3D	= 0x0400,
+};
+
+/* LCD Controller */
+
+#define REG_LCD(x)	(x)
+enum glamo_reg_lcd {
+	GLAMO_REG_LCD_MODE1		= REG_LCD(0x00),
+	GLAMO_REG_LCD_MODE2		= REG_LCD(0x02),
+	GLAMO_REG_LCD_MODE3		= REG_LCD(0x04),
+	GLAMO_REG_LCD_WIDTH		= REG_LCD(0x06),
+	GLAMO_REG_LCD_HEIGHT		= REG_LCD(0x08),
+	GLAMO_REG_LCD_POLARITY		= REG_LCD(0x0a),
+	GLAMO_REG_LCD_A_BASE1		= REG_LCD(0x0c),
+	GLAMO_REG_LCD_A_BASE2		= REG_LCD(0x0e),
+	GLAMO_REG_LCD_B_BASE1		= REG_LCD(0x10),
+	GLAMO_REG_LCD_B_BASE2		= REG_LCD(0x12),
+	GLAMO_REG_LCD_C_BASE1		= REG_LCD(0x14),
+	GLAMO_REG_LCD_C_BASE2		= REG_LCD(0x16),
+	GLAMO_REG_LCD_PITCH		= REG_LCD(0x18),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_TOTAL	= REG_LCD(0x1c),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_RETR_START	= REG_LCD(0x20),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_RETR_END	= REG_LCD(0x24),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_DISP_START	= REG_LCD(0x28),
+	/* RES */
+	GLAMO_REG_LCD_HORIZ_DISP_END	= REG_LCD(0x2c),
+	/* RES */
+	GLAMO_REG_LCD_VERT_TOTAL	= REG_LCD(0x30),
+	/* RES */
+	GLAMO_REG_LCD_VERT_RETR_START	= REG_LCD(0x34),
+	/* RES */
+	GLAMO_REG_LCD_VERT_RETR_END	= REG_LCD(0x38),
+	/* RES */
+	GLAMO_REG_LCD_VERT_DISP_START	= REG_LCD(0x3c),
+	/* RES */
+	GLAMO_REG_LCD_VERT_DISP_END	= REG_LCD(0x40),
+	/* RES */
+	GLAMO_REG_LCD_POL		= REG_LCD(0x44),
+	GLAMO_REG_LCD_DATA_START	= REG_LCD(0x46),
+	GLAMO_REG_LCD_FRATE_CONTRO	= REG_LCD(0x48),
+	GLAMO_REG_LCD_DATA_CMD_HDR	= REG_LCD(0x4a),
+	GLAMO_REG_LCD_SP_START		= REG_LCD(0x4c),
+	GLAMO_REG_LCD_SP_END		= REG_LCD(0x4e),
+	GLAMO_REG_LCD_CURSOR_BASE1	= REG_LCD(0x50),
+	GLAMO_REG_LCD_CURSOR_BASE2	= REG_LCD(0x52),
+	GLAMO_REG_LCD_CURSOR_PITCH	= REG_LCD(0x54),
+	GLAMO_REG_LCD_CURSOR_X_SIZE	= REG_LCD(0x56),
+	GLAMO_REG_LCD_CURSOR_Y_SIZE	= REG_LCD(0x58),
+	GLAMO_REG_LCD_CURSOR_X_POS	= REG_LCD(0x5a),
+	GLAMO_REG_LCD_CURSOR_Y_POS	= REG_LCD(0x5c),
+	GLAMO_REG_LCD_CURSOR_PRESET	= REG_LCD(0x5e),
+	GLAMO_REG_LCD_CURSOR_FG_COLOR	= REG_LCD(0x60),
+	/* RES */
+	GLAMO_REG_LCD_CURSOR_BG_COLOR	= REG_LCD(0x64),
+	/* RES */
+	GLAMO_REG_LCD_CURSOR_DST_COLOR	= REG_LCD(0x68),
+	/* RES */
+	GLAMO_REG_LCD_STATUS1		= REG_LCD(0x80),
+	GLAMO_REG_LCD_STATUS2		= REG_LCD(0x82),
+	GLAMO_REG_LCD_STATUS3		= REG_LCD(0x84),
+	GLAMO_REG_LCD_STATUS4		= REG_LCD(0x86),
+	/* RES */
+	GLAMO_REG_LCD_COMMAND1		= REG_LCD(0xa0),
+	GLAMO_REG_LCD_COMMAND2		= REG_LCD(0xa2),
+	/* RES */
+	GLAMO_REG_LCD_WFORM_DELAY1	= REG_LCD(0xb0),
+	GLAMO_REG_LCD_WFORM_DELAY2	= REG_LCD(0xb2),
+	/* RES */
+	GLAMO_REG_LCD_GAMMA_CORR	= REG_LCD(0x100),
+	/* RES */
+	GLAMO_REG_LCD_GAMMA_R_ENTRY01	= REG_LCD(0x110),
+	GLAMO_REG_LCD_GAMMA_R_ENTRY23	= REG_LCD(0x112),
+	GLAMO_REG_LCD_GAMMA_R_ENTRY45	= REG_LCD(0x114),
+	GLAMO_REG_LCD_GAMMA_R_ENTRY67	= REG_LCD(0x116),
+	GLAMO_REG_LCD_GAMMA_R_ENTRY8	= REG_LCD(0x118),
+	/* RES */
+	GLAMO_REG_LCD_GAMMA_G_ENTRY01	= REG_LCD(0x130),
+	GLAMO_REG_LCD_GAMMA_G_ENTRY23	= REG_LCD(0x132),
+	GLAMO_REG_LCD_GAMMA_G_ENTRY45	= REG_LCD(0x134),
+	GLAMO_REG_LCD_GAMMA_G_ENTRY67	= REG_LCD(0x136),
+	GLAMO_REG_LCD_GAMMA_G_ENTRY8	= REG_LCD(0x138),
+	/* RES */
+	GLAMO_REG_LCD_GAMMA_B_ENTRY01	= REG_LCD(0x150),
+	GLAMO_REG_LCD_GAMMA_B_ENTRY23	= REG_LCD(0x152),
+	GLAMO_REG_LCD_GAMMA_B_ENTRY45	= REG_LCD(0x154),
+	GLAMO_REG_LCD_GAMMA_B_ENTRY67	= REG_LCD(0x156),
+	GLAMO_REG_LCD_GAMMA_B_ENTRY8	= REG_LCD(0x158),
+	/* RES */
+	GLAMO_REG_LCD_SRAM_DRIVING1	= REG_LCD(0x160),
+	GLAMO_REG_LCD_SRAM_DRIVING2	= REG_LCD(0x162),
+	GLAMO_REG_LCD_SRAM_DRIVING3	= REG_LCD(0x164),
+};
+
+enum glamo_reg_lcd_mode1 {
+	GLAMO_LCD_MODE1_PWRSAVE		= 0x0001,
+	GLAMO_LCD_MODE1_PARTIAL_PRT	= 0x0002,
+	GLAMO_LCD_MODE1_HWFLIP		= 0x0004,
+	GLAMO_LCD_MODE1_LCD2		= 0x0008,
+	/* RES */
+	GLAMO_LCD_MODE1_PARTIAL_MODE	= 0x0020,
+	GLAMO_LCD_MODE1_CURSOR_DSTCOLOR	= 0x0040,
+	GLAMO_LCD_MODE1_PARTIAL_ENABLE	= 0x0080,
+	GLAMO_LCD_MODE1_TVCLK_IN_ENABLE	= 0x0100,
+	GLAMO_LCD_MODE1_HSYNC_HIGH_ACT	= 0x0200,
+	GLAMO_LCD_MODE1_VSYNC_HIGH_ACT	= 0x0400,
+	GLAMO_LCD_MODE1_HSYNC_FLIP	= 0x0800,
+	GLAMO_LCD_MODE1_GAMMA_COR_EN	= 0x1000,
+	GLAMO_LCD_MODE1_DITHER_EN	= 0x2000,
+	GLAMO_LCD_MODE1_CURSOR_EN	= 0x4000,
+	GLAMO_LCD_MODE1_ROTATE_EN	= 0x8000,
+};
+
+enum glamo_reg_lcd_mode2 {
+	GLAMO_LCD_MODE2_CRC_CHECK_EN	= 0x0001,
+	GLAMO_LCD_MODE2_DCMD_PER_LINE	= 0x0002,
+	GLAMO_LCD_MODE2_NOUSE_BDEF	= 0x0004,
+	GLAMO_LCD_MODE2_OUT_POS_MODE	= 0x0008,
+	GLAMO_LCD_MODE2_FRATE_CTRL_EN	= 0x0010,
+	GLAMO_LCD_MODE2_SINGLE_BUFFER	= 0x0020,
+	GLAMO_LCD_MODE2_SER_LSB_TO_MSB	= 0x0040,
+	/* FIXME */
+};
+
+enum glamo_reg_lcd_mode3 {
+	/* LCD color source data format */
+	GLAMO_LCD_SRC_RGB565		= 0x0000,
+	GLAMO_LCD_SRC_ARGB1555		= 0x4000,
+	GLAMO_LCD_SRC_ARGB4444		= 0x8000,
+	/* interface type */
+	GLAMO_LCD_MODE3_LCD		= 0x1000,
+	GLAMO_LCD_MODE3_RGB		= 0x0800,
+	GLAMO_LCD_MODE3_CPU		= 0x0000,
+	/* mode */
+	GLAMO_LCD_MODE3_RGB332		= 0x0000,
+	GLAMO_LCD_MODE3_RGB444		= 0x0100,
+	GLAMO_LCD_MODE3_RGB565		= 0x0200,
+	GLAMO_LCD_MODE3_RGB666		= 0x0300,
+	/* depth */
+	GLAMO_LCD_MODE3_6BITS		= 0x0000,
+	GLAMO_LCD_MODE3_8BITS		= 0x0010,
+	GLAMO_LCD_MODE3_9BITS		= 0x0020,
+	GLAMO_LCD_MODE3_16BITS		= 0x0030,
+	GLAMO_LCD_MODE3_18BITS		= 0x0040,
+};
+
+enum glamo_lcd_rot_mode {
+	GLAMO_LCD_ROT_MODE_0            = 0x0000,
+	GLAMO_LCD_ROT_MODE_180          = 0x2000,
+	GLAMO_LCD_ROT_MODE_MIRROR       = 0x4000,
+	GLAMO_LCD_ROT_MODE_FLIP         = 0x6000,
+	GLAMO_LCD_ROT_MODE_90           = 0x8000,
+	GLAMO_LCD_ROT_MODE_270          = 0xa000,
+};
+#define GLAMO_LCD_ROT_MODE_MASK         0xe000
+
+enum glamo_lcd_cmd_type {
+	GLAMO_LCD_CMD_TYPE_DISP		 = 0x0000,
+	GLAMO_LCD_CMD_TYPE_PARALLEL	 = 0x4000,
+	GLAMO_LCD_CMD_TYPE_SERIAL	 = 0x8000,
+	GLAMO_LCD_CMD_TYPE_SERIAL_DIRECT = 0xc000,
+};
+#define GLAMO_LCD_CMD_TYPE_MASK		0xc000
+
+enum glamo_lcd_cmds {
+	GLAMO_LCD_CMD_DATA_DISP_FIRE	= 0x00,
+	GLAMO_LCD_CMD_DATA_DISP_SYNC	= 0x01,		/* RGB only */
+	/* switch to command mode, no display */
+	GLAMO_LCD_CMD_DATA_FIRE_NO_DISP	= 0x02,
+	/* display until VSYNC, switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_VSYNC	= 0x11,
+	/* display until HSYNC, switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_HSYNC	= 0x12,
+	/* display until VSYNC, 1 black frame, VSYNC, switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_VSYNC_B	= 0x13,
+	/* don't care about display and switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_FREE	= 0x14,		/* RGB only */
+	/* don't care about display, keep data display but disable data,
+	 * and switch to command */
+	GLAMO_LCD_CMD_DATA_FIRE_FREE_D	= 0x15,		/* RGB only */
+};
+
+enum glamo_core_revisions {
+	GLAMO_CORE_REV_A0		= 0x0000,
+	GLAMO_CORE_REV_A1		= 0x0001,
+	GLAMO_CORE_REV_A2		= 0x0002,
+	GLAMO_CORE_REV_A3		= 0x0003,
+};
+
+#endif /* _GLAMO_REGS_H */
diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
index c2d05becfa9..2bd6a3f4dc5 100644
--- a/drivers/mfd/pcf50633-adc.c
+++ b/drivers/mfd/pcf50633-adc.c
@@ -209,17 +209,16 @@ static void pcf50633_adc_irq(int irq, void *data)
 
 static int __devinit pcf50633_adc_probe(struct platform_device *pdev)
 {
-	struct pcf50633_subdev_pdata *pdata = pdev->dev.platform_data;
 	struct pcf50633_adc *adc;
 
 	adc = kzalloc(sizeof(*adc), GFP_KERNEL);
 	if (!adc)
 		return -ENOMEM;
 
-	adc->pcf = pdata->pcf;
+	adc->pcf = dev_to_pcf50633(pdev->dev.parent);
 	platform_set_drvdata(pdev, adc);
 
-	pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ADCRDY,
+	pcf50633_register_irq(adc->pcf, PCF50633_IRQ_ADCRDY,
 					pcf50633_adc_irq, adc);
 
 	mutex_init(&adc->queue_mutex);
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 8d3c38bf971..41ac3a52df1 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -290,7 +290,7 @@ out:
 
 int pcf50633_irq_mask(struct pcf50633 *pcf, int irq)
 {
-	dev_info(pcf->dev, "Masking IRQ %d\n", irq);
+	dev_dbg(pcf->dev, "Masking IRQ %d\n", irq);
 
 	return __pcf50633_irq_mask_set(pcf, irq, 1);
 }
@@ -298,7 +298,7 @@ EXPORT_SYMBOL_GPL(pcf50633_irq_mask);
 
 int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq)
 {
-	dev_info(pcf->dev, "Unmasking IRQ %d\n", irq);
+	dev_dbg(pcf->dev, "Unmasking IRQ %d\n", irq);
 
 	return __pcf50633_irq_mask_set(pcf, irq, 0);
 }
@@ -345,23 +345,26 @@ static void pcf50633_irq_worker(struct work_struct *work)
 		goto out;
 	}
 
+	/* defeat 8s death from lowsys on A5 */
+	pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN,  0x04);
+
 	/* We immediately read the usb and adapter status. We thus make sure
 	 * only of USBINS/USBREM IRQ handlers are called */
 	if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
 		chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
 		if (chgstat & (0x3 << 4))
-			pcf_int[0] &= ~(1 << PCF50633_INT1_USBREM);
+			pcf_int[0] &= ~PCF50633_INT1_USBREM;
 		else
-			pcf_int[0] &= ~(1 << PCF50633_INT1_USBINS);
+			pcf_int[0] &= ~PCF50633_INT1_USBINS;
 	}
 
 	/* Make sure only one of ADPINS or ADPREM is set */
 	if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) {
 		chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
 		if (chgstat & (0x3 << 4))
-			pcf_int[0] &= ~(1 << PCF50633_INT1_ADPREM);
+			pcf_int[0] &= ~PCF50633_INT1_ADPREM;
 		else
-			pcf_int[0] &= ~(1 << PCF50633_INT1_ADPINS);
+			pcf_int[0] &= ~PCF50633_INT1_ADPINS;
 	}
 
 	dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x "
@@ -444,7 +447,7 @@ static irqreturn_t pcf50633_irq(int irq, void *data)
 
 	get_device(pcf->dev);
 	disable_irq_nosync(pcf->irq);
-	schedule_work(&pcf->irq_work);
+	queue_work(pcf->work_queue, &pcf->irq_work);
 
 	return IRQ_HANDLED;
 }
@@ -453,7 +456,6 @@ static void
 pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
 						struct platform_device **pdev)
 {
-	struct pcf50633_subdev_pdata *subdev_pdata;
 	int ret;
 
 	*pdev = platform_device_alloc(name, -1);
@@ -462,15 +464,6 @@ pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
 		return;
 	}
 
-	subdev_pdata = kmalloc(sizeof(*subdev_pdata), GFP_KERNEL);
-	if (!subdev_pdata) {
-		dev_err(pcf->dev, "Error allocating subdev pdata\n");
-		platform_device_put(*pdev);
-	}
-
-	subdev_pdata->pcf = pcf;
-	platform_device_add_data(*pdev, subdev_pdata, sizeof(*subdev_pdata));
-
 	(*pdev)->dev.parent = pcf->dev;
 
 	ret = platform_device_add(*pdev);
@@ -482,13 +475,13 @@ pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
 }
 
 #ifdef CONFIG_PM
-static int pcf50633_suspend(struct device *dev, pm_message_t state)
+static int pcf50633_suspend(struct i2c_client *client, pm_message_t state)
 {
 	struct pcf50633 *pcf;
 	int ret = 0, i;
 	u8 res[5];
 
-	pcf = dev_get_drvdata(dev);
+	pcf = i2c_get_clientdata(client);
 
 	/* Make sure our interrupt handlers are not called
 	 * henceforth */
@@ -523,12 +516,12 @@ out:
 	return ret;
 }
 
-static int pcf50633_resume(struct device *dev)
+static int pcf50633_resume(struct i2c_client *client)
 {
 	struct pcf50633 *pcf;
 	int ret;
 
-	pcf = dev_get_drvdata(dev);
+	pcf = i2c_get_clientdata(client);
 
 	/* Write the saved mask registers */
 	ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
@@ -560,9 +553,14 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 {
 	struct pcf50633 *pcf;
 	struct pcf50633_platform_data *pdata = client->dev.platform_data;
-	int i, ret = 0;
+	int i, ret;
 	int version, variant;
 
+	if (!client->irq) {
+		dev_err(&client->dev, "Missing IRQ\n");
+		return -ENOENT;
+	}
+
 	pcf = kzalloc(sizeof(*pcf), GFP_KERNEL);
 	if (!pcf)
 		return -ENOMEM;
@@ -575,6 +573,12 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 	pcf->dev = &client->dev;
 	pcf->i2c_client = client;
 	pcf->irq = client->irq;
+	pcf->work_queue = create_singlethread_workqueue("pcf50633");
+
+	if (!pcf->work_queue) {
+		dev_err(&client->dev, "Failed to alloc workqueue\n");
+		goto err_free;
+	}
 
 	INIT_WORK(&pcf->irq_work, pcf50633_irq_worker);
 
@@ -583,7 +587,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 	if (version < 0 || variant < 0) {
 		dev_err(pcf->dev, "Unable to probe pcf50633\n");
 		ret = -ENODEV;
-		goto err;
+		goto err_destroy_workqueue;
 	}
 
 	dev_info(pcf->dev, "Probed device version %d variant %d\n",
@@ -597,6 +601,15 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 	pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00);
 	pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00);
 
+	set_irq_handler(client->irq, handle_level_irq);
+	ret = request_irq(client->irq, pcf50633_irq,
+					IRQF_TRIGGER_LOW, "pcf50633", pcf);
+
+	if (ret) {
+		dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
+		goto err_destroy_workqueue;
+	}
+
 	/* Create sub devices */
 	pcf50633_client_dev_register(pcf, "pcf50633-input",
 						&pcf->input_pdev);
@@ -606,52 +619,46 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 						&pcf->mbc_pdev);
 	pcf50633_client_dev_register(pcf, "pcf50633-adc",
 						&pcf->adc_pdev);
+	pcf50633_client_dev_register(pcf, "pcf50633-backlight",
+						&pcf->bl_pdev);
+
 
 	for (i = 0; i < PCF50633_NUM_REGULATORS; i++) {
 		struct platform_device *pdev;
 
 		pdev = platform_device_alloc("pcf50633-regltr", i);
 		if (!pdev) {
-			dev_err(pcf->dev, "Cannot create regulator\n");
+			dev_err(pcf->dev, "Cannot create regulator %d\n", i);
 			continue;
 		}
 
 		pdev->dev.parent = pcf->dev;
-		pdev->dev.platform_data = &pdata->reg_init_data[i];
-		dev_set_drvdata(&pdev->dev, pcf);
+		platform_device_add_data(pdev, &pdata->reg_init_data[i],
+					sizeof(pdata->reg_init_data[i]));
 		pcf->regulator_pdev[i] = pdev;
 
 		platform_device_add(pdev);
 	}
 
-	if (client->irq) {
-		ret = request_irq(client->irq, pcf50633_irq,
-				IRQF_TRIGGER_LOW, "pcf50633", pcf);
-
-		if (ret) {
-			dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
-			goto err;
-		}
-	} else {
-		dev_err(pcf->dev, "No IRQ configured\n");
-		goto err;
-	}
-
 	if (enable_irq_wake(client->irq) < 0)
-		dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
+		dev_info(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
 			"in this hardware revision", client->irq);
 
 	ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group);
 	if (ret)
-		dev_err(pcf->dev, "error creating sysfs entries\n");
+		dev_info(pcf->dev, "Failed to create sysfs entries\n");
 
 	if (pdata->probe_done)
 		pdata->probe_done(pcf);
 
 	return 0;
 
-err:
+err_destroy_workqueue:
+	destroy_workqueue(pcf->work_queue);
+err_free:
+	i2c_set_clientdata(client, NULL);
 	kfree(pcf);
+
 	return ret;
 }
 
@@ -661,6 +668,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client)
 	int i;
 
 	free_irq(pcf->irq, pcf);
+	destroy_workqueue(pcf->work_queue);
 
 	platform_device_unregister(pcf->input_pdev);
 	platform_device_unregister(pcf->rtc_pdev);
@@ -683,12 +691,12 @@ static struct i2c_device_id pcf50633_id_table[] = {
 static struct i2c_driver pcf50633_driver = {
 	.driver = {
 		.name	= "pcf50633",
-		.suspend = pcf50633_suspend,
-		.resume	= pcf50633_resume,
 	},
 	.id_table = pcf50633_id_table,
 	.probe = pcf50633_probe,
 	.remove = __devexit_p(pcf50633_remove),
+	.suspend = pcf50633_suspend,
+	.resume	= pcf50633_resume,
 };
 
 static int __init pcf50633_init(void)
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 4c7b7962f6b..0cc5eeff5ee 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -367,7 +367,8 @@ int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
 		break;
 
 	default:
-		return -1;
+		gate = -1;
+		goto already;
 	}
 
 	writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index bae61b22501..7d430835655 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -180,14 +180,9 @@ static struct completion irq_event;
 static int twl4030_irq_thread(void *data)
 {
 	long irq = (long)data;
-	struct irq_desc *desc = irq_to_desc(irq);
 	static unsigned i2c_errors;
 	static const unsigned max_i2c_errors = 100;
 
-	if (!desc) {
-		pr_err("twl4030: Invalid IRQ: %ld\n", irq);
-		return -EINVAL;
-	}
 
 	current->flags |= PF_NOFREEZE;
 
@@ -240,7 +235,7 @@ static int twl4030_irq_thread(void *data)
 		}
 		local_irq_enable();
 
-		desc->chip->unmask(irq);
+		enable_irq(irq);
 	}
 
 	return 0;
@@ -255,25 +250,13 @@ static int twl4030_irq_thread(void *data)
  * thread.  All we do here is acknowledge and mask the interrupt and wakeup
  * the kernel thread.
  */
-static void handle_twl4030_pih(unsigned int irq, struct irq_desc *desc)
+static irqreturn_t handle_twl4030_pih(int irq, void *devid)
 {
 	/* Acknowledge, clear *AND* mask the interrupt... */
-	desc->chip->ack(irq);
-	complete(&irq_event);
-}
-
-static struct task_struct *start_twl4030_irq_thread(long irq)
-{
-	struct task_struct *thread;
-
-	init_completion(&irq_event);
-	thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq");
-	if (!thread)
-		pr_err("twl4030: could not create irq %ld thread!\n", irq);
-
-	return thread;
+	disable_irq_nosync(irq);
+	complete(devid);
+	return IRQ_HANDLED;
 }
-
 /*----------------------------------------------------------------------*/
 
 /*
@@ -734,18 +717,28 @@ int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
 	}
 
 	/* install an irq handler to demultiplex the TWL4030 interrupt */
-	task = start_twl4030_irq_thread(irq_num);
-	if (!task) {
-		pr_err("twl4030: irq thread FAIL\n");
-		status = -ESRCH;
-		goto fail;
-	}
 
-	set_irq_data(irq_num, task);
-	set_irq_chained_handler(irq_num, handle_twl4030_pih);
 
-	return status;
+	init_completion(&irq_event);
 
+	status = request_irq(irq_num, handle_twl4030_pih, IRQF_DISABLED,
+				"TWL4030-PIH", &irq_event);
+	if (status < 0) {
+		pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
+		goto fail_rqirq;
+	}
+
+	task = kthread_run(twl4030_irq_thread, (void *)irq_num, "twl4030-irq");
+	if (IS_ERR(task)) {
+		pr_err("twl4030: could not create irq %d thread!\n", irq_num);
+		status = PTR_ERR(task);
+		goto fail_kthread;
+	}
+	return status;
+fail_kthread:
+	free_irq(irq_num, &irq_event);
+fail_rqirq:
+	/* clean up twl4030_sih_setup */
 fail:
 	for (i = irq_base; i < irq_end; i++)
 		set_irq_chip_and_handler(i, NULL, NULL);
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
index d38a7acdb6e..d019746551f 100644
--- a/drivers/misc/cb710/sgbuf2.c
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -114,7 +114,6 @@ static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data)
 		if (!left)
 			return;
 		addr += len;
-		flush_kernel_dcache_page(miter->page);
 	} while (sg_dwiter_next(miter));
 }
 
@@ -142,9 +141,6 @@ void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t da
 			return;
 	} else
 		sg_dwiter_write_slow(miter, data);
-
-	if (miter->length == miter->consumed)
-		flush_kernel_dcache_page(miter->page);
 }
 EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block);
 
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index b34cb5f79ee..2e535a0ccd5 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -173,6 +173,7 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
 		unsigned	segment;
 		unsigned	offset = (unsigned) off;
 		u8		*cp = bounce + 1;
+		int		sr;
 
 		*cp = AT25_WREN;
 		status = spi_write(at25->spi, cp, 1);
@@ -214,7 +215,6 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
 		timeout = jiffies + msecs_to_jiffies(EE_TIMEOUT);
 		retries = 0;
 		do {
-			int	sr;
 
 			sr = spi_w8r8(at25->spi, AT25_RDSR);
 			if (sr < 0 || (sr & AT25_SR_nRDY)) {
@@ -228,7 +228,7 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
 				break;
 		} while (retries++ < 3 || time_before_eq(jiffies, timeout));
 
-		if (time_after(jiffies, timeout)) {
+		if ((sr < 0) || (sr & AT25_SR_nRDY)) {
 			dev_err(&at25->spi->dev,
 				"write %d bytes offset %d, "
 				"timeout after %u msecs\n",
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index fa2d93a9fb8..aed609832bc 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -29,7 +29,6 @@
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/io.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
 #include <linux/miscdevice.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index eedbf9c3276..79689b10f93 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -24,7 +24,6 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
 #include <linux/miscdevice.h>
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 8d1c60a3f0d..5d778ec8cdb 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -235,7 +235,7 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg)
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 	dev_dbg(xpnet, "passing skb to network layer\n"
-		KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
+		"\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
 		"skb->end=0x%p skb->len=%d\n",
 		(void *)skb->head, (void *)skb->data, skb_tail_pointer(skb),
 		skb_end_pointer(skb), skb->len);
@@ -399,7 +399,7 @@ xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg,
 	msg->buf_pa = xp_pa((void *)start_addr);
 
 	dev_dbg(xpnet, "sending XPC message to %d:%d\n"
-		KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
+		"msg->buf_pa=0x%lx, msg->size=%u, "
 		"msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
 		dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
 		msg->leadin_ignore, msg->tailout_ignore);
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
index 11efefb1af5..4e72964a7b4 100644
--- a/drivers/mmc/host/cb710-mmc.c
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -278,7 +278,7 @@ static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
 	if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
 		return -EINVAL;
 
-	sg_miter_start(&miter, data->sg, data->sg_len, 0);
+	sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG);
 
 	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
 		15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
@@ -307,7 +307,7 @@ static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
 			goto out;
 	}
 out:
-	cb710_sg_miter_stop_writing(&miter);
+	sg_miter_stop(&miter);
 	return err;
 }
 
@@ -322,7 +322,7 @@ static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data)
 	if (unlikely(data->blocks > 1 && data->blksz & 15))
 		return -EINVAL;
 
-	sg_miter_start(&miter, data->sg, data->sg_len, 0);
+	sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG);
 
 	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
 		0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index e0be21a4a69..bf98d7cc928 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -652,7 +652,7 @@ static irqreturn_t imxmci_irq(int irq, void *devid)
 	set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
 	tasklet_schedule(&host->tasklet);
 
-	return IRQ_RETVAL(handled);;
+	return IRQ_RETVAL(handled);
 }
 
 static void imxmci_tasklet_fnc(unsigned long data)
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 240608cc7ae..a461017ce5c 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1313,6 +1313,12 @@ static int mmc_spi_probe(struct spi_device *spi)
 	struct mmc_spi_host	*host;
 	int			status;
 
+	/* We rely on full duplex transfers, mostly to reduce
+	 * per-transfer overheads (by making fewer transfers).
+	 */
+	if (spi->master->flags & SPI_MASTER_HALF_DUPLEX)
+		return -EINVAL;
+
 	/* MMC and SD specs only seem to care that sampling is on the
 	 * rising edge ... meaning SPI modes 0 or 3.  So either SPI mode
 	 * should be legit.  We'll use mode 0 since the steady state is 0,
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index b56d72ff06e..34e23489811 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -384,7 +384,7 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
 				u16 val[2] = {0, 0};
 				val[0] = mvsd_read(MVSD_FIFO);
 				val[1] = mvsd_read(MVSD_FIFO);
-				memcpy(p, &val, s);
+				memcpy(p, ((void *)&val) + 4 - s, s);
 				s = 0;
 				intr_status = mvsd_read(MVSD_NOR_INTR_STATUS);
 			}
@@ -423,7 +423,7 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
 		if (s < 4) {
 			if (s && (intr_status & MVSD_NOR_TX_AVAIL)) {
 				u16 val[2] = {0, 0};
-				memcpy(&val, p, s);
+				memcpy(((void *)&val) + 4 - s, p, s);
 				mvsd_write(MVSD_FIFO, val[0]);
 				mvsd_write(MVSD_FIFO, val[1]);
 				s = 0;
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index d7d7109ef47..e55ac792d68 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -168,12 +168,12 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 
 	if (data->flags & MMC_DATA_READ) {
 		host->dma_dir = DMA_FROM_DEVICE;
-		dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG;
+		dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC;
 		DRCMR(host->dma_drcmrtx) = 0;
 		DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
 	} else {
 		host->dma_dir = DMA_TO_DEVICE;
-		dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC;
+		dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG;
 		DRCMR(host->dma_drcmrrx) = 0;
 		DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
 	}
diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c
index d79fa55c3b8..1e8aa590bb3 100644
--- a/drivers/mmc/host/sdhci-of.c
+++ b/drivers/mmc/host/sdhci-of.c
@@ -158,6 +158,13 @@ static unsigned int esdhc_get_max_clock(struct sdhci_host *host)
 	return of_host->clock;
 }
 
+static unsigned int esdhc_get_min_clock(struct sdhci_host *host)
+{
+	struct sdhci_of_host *of_host = sdhci_priv(host);
+
+	return of_host->clock / 256 / 16;
+}
+
 static unsigned int esdhc_get_timeout_clock(struct sdhci_host *host)
 {
 	struct sdhci_of_host *of_host = sdhci_priv(host);
@@ -184,6 +191,7 @@ static struct sdhci_of_data sdhci_esdhc = {
 		.set_clock = esdhc_set_clock,
 		.enable_dma = esdhc_enable_dma,
 		.get_max_clock = esdhc_get_max_clock,
+		.get_min_clock = esdhc_get_min_clock,
 		.get_timeout_clock = esdhc_get_timeout_clock,
 	},
 };
@@ -226,7 +234,7 @@ static int __devinit sdhci_of_probe(struct of_device *ofdev,
 		return -ENODEV;
 
 	host = sdhci_alloc_host(&ofdev->dev, sizeof(*of_host));
-	if (!host)
+	if (IS_ERR(host))
 		return -ENOMEM;
 
 	of_host = sdhci_priv(host);
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6779b4ecab1..fc96f8cb9c0 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -773,8 +773,14 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 	}
 
 	if (!(host->flags & SDHCI_REQ_USE_DMA)) {
-		sg_miter_start(&host->sg_miter,
-			data->sg, data->sg_len, SG_MITER_ATOMIC);
+		int flags;
+
+		flags = SG_MITER_ATOMIC;
+		if (host->data->flags & MMC_DATA_READ)
+			flags |= SG_MITER_TO_SG;
+		else
+			flags |= SG_MITER_FROM_SG;
+		sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
 		host->blocks = data->blocks;
 	}
 
@@ -1766,7 +1772,10 @@ int sdhci_add_host(struct sdhci_host *host)
 	 * Set host parameters.
 	 */
 	mmc->ops = &sdhci_ops;
-	mmc->f_min = host->max_clk / 256;
+	if (host->ops->get_min_clock)
+		mmc->f_min = host->ops->get_min_clock(host);
+	else
+		mmc->f_min = host->max_clk / 256;
 	mmc->f_max = host->max_clk;
 	mmc->caps = MMC_CAP_SDIO_IRQ;
 
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 831ddf7dcb4..c77e9ff3022 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -302,6 +302,7 @@ struct sdhci_ops {
 
 	int		(*enable_dma)(struct sdhci_host *host);
 	unsigned int	(*get_max_clock)(struct sdhci_host *host);
+	unsigned int	(*get_min_clock)(struct sdhci_host *host);
 	unsigned int	(*get_timeout_clock)(struct sdhci_host *host);
 };
 
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index 5011fa73f91..1479da6d3aa 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -194,7 +194,7 @@ static struct mtd_partition * newpart(char *s,
 	parts[this_part].name = extra_mem;
 	extra_mem += name_len + 1;
 
-	dbg(("partition %d: name <%s>, offset %x, size %x, mask flags %x\n",
+	dbg(("partition %d: name <%s>, offset %llx, size %llx, mask flags %x\n",
 	     this_part,
 	     parts[this_part].name,
 	     parts[this_part].offset,
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 59c46126a5c..10ed195c0c1 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -54,7 +54,7 @@
 #define	SR_SRWD			0x80	/* SR write protect */
 
 /* Define max times to check status register before we give up. */
-#define	MAX_READY_WAIT_JIFFIES	(10 * HZ)	/* eg. M25P128 specs 6s max sector erase */
+#define	MAX_READY_WAIT_JIFFIES	(40 * HZ)	/* M25P16 specs 40s max chip erase */
 #define	CMD_SIZE		4
 
 #ifdef CONFIG_M25PXX_USE_FAST_READ
@@ -736,7 +736,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
 			flash->partitioned = 1;
 			return add_mtd_partitions(&flash->mtd, parts, nr_parts);
 		}
-	} else if (data->nr_parts)
+	} else if (data && data->nr_parts)
 		dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
 				data->nr_parts, data->name);
 
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index 73f05227dc8..d8cf29c01cc 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -226,7 +226,7 @@ static u16 INFTL_findfreeblock(struct INFTLrecord *inftl, int desperate)
 	if (!desperate && inftl->numfreeEUNs < 2) {
 		DEBUG(MTD_DEBUG_LEVEL1, "INFTL: there are too few free "
 			"EUNs (%d)\n", inftl->numfreeEUNs);
-		return 0xffff;
+		return BLOCK_NIL;
 	}
 
 	/* Scan for a free block */
@@ -281,7 +281,8 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
 	silly = MAX_LOOPS;
 	while (thisEUN < inftl->nb_blocks) {
 		for (block = 0; block < inftl->EraseSize/SECTORSIZE; block ++) {
-			if ((BlockMap[block] != 0xffff) || BlockDeleted[block])
+			if ((BlockMap[block] != BLOCK_NIL) ||
+			    BlockDeleted[block])
 				continue;
 
 			if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize)
@@ -525,7 +526,7 @@ static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block)
 			if (!silly--) {
 				printk(KERN_WARNING "INFTL: infinite loop in "
 					"Virtual Unit Chain 0x%x\n", thisVUC);
-				return 0xffff;
+				return BLOCK_NIL;
 			}
 
 			/* Skip to next block in chain */
@@ -549,7 +550,7 @@ hitused:
 			 * waiting to be picked up. We're going to have to fold
 			 * a chain to make room.
 			 */
-			thisEUN = INFTL_makefreeblock(inftl, 0xffff);
+			thisEUN = INFTL_makefreeblock(inftl, BLOCK_NIL);
 
 			/*
 			 * Hopefully we free something, lets try again.
@@ -631,7 +632,7 @@ hitused:
 
 	printk(KERN_WARNING "INFTL: error folding to make room for Virtual "
 		"Unit Chain 0x%x\n", thisVUC);
-	return 0xffff;
+	return BLOCK_NIL;
 }
 
 /*
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 0b98654d8ee..7a58bd5522f 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -284,13 +284,6 @@ config MTD_L440GX
 
 	  BE VERY CAREFUL.
 
-config MTD_SBC8240
-	tristate "Flash device on SBC8240"
-	depends on MTD_JEDECPROBE && 8260
-	help
-          Flash access on the SBC8240 board from Wind River.  See
-          <http://www.windriver.com/products/sbc8240/>
-
 config MTD_TQM8XXL
 	tristate "CFI Flash device mapped on TQM8XXL"
 	depends on MTD_CFI && TQM8xxL
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 8bae7f9850c..5beb0662d72 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -50,7 +50,6 @@ obj-$(CONFIG_MTD_UCLINUX)	+= uclinux.o
 obj-$(CONFIG_MTD_NETtel)	+= nettel.o
 obj-$(CONFIG_MTD_SCB2_FLASH)	+= scb2_flash.o
 obj-$(CONFIG_MTD_H720X)		+= h720x-flash.o
-obj-$(CONFIG_MTD_SBC8240)	+= sbc8240.o
 obj-$(CONFIG_MTD_IXP4XX)	+= ixp4xx.o
 obj-$(CONFIG_MTD_IXP2000)	+= ixp2000.o
 obj-$(CONFIG_MTD_WRSBC8260)	+= wr_sbc82xx_flash.o
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index b08a798ee25..2aac41bde8b 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -42,10 +42,8 @@
 #include <mach/hardware.h>
 #include <asm/system.h>
 
-#define SUBDEV_NAME_SIZE	(BUS_ID_SIZE + 2)
-
 struct armflash_subdev_info {
-	char			name[SUBDEV_NAME_SIZE];
+	char			*name;
 	struct mtd_info		*mtd;
 	struct map_info		map;
 	struct flash_platform_data *plat;
@@ -134,6 +132,8 @@ static void armflash_subdev_remove(struct armflash_subdev_info *subdev)
 		map_destroy(subdev->mtd);
 	if (subdev->map.virt)
 		iounmap(subdev->map.virt);
+	kfree(subdev->name);
+	subdev->name = NULL;
 	release_mem_region(subdev->map.phys, subdev->map.size);
 }
 
@@ -177,16 +177,22 @@ static int armflash_probe(struct platform_device *dev)
 
 		if (nr == 1)
 			/* No MTD concatenation, just use the default name */
-			snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s",
-				 dev_name(&dev->dev));
+			subdev->name = kstrdup(dev_name(&dev->dev), GFP_KERNEL);
 		else
-			snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s-%d",
-				 dev_name(&dev->dev), i);
+			subdev->name = kasprintf(GFP_KERNEL, "%s-%d",
+						 dev_name(&dev->dev), i);
+		if (!subdev->name) {
+			err = -ENOMEM;
+			break;
+		}
 		subdev->plat = plat;
 
 		err = armflash_subdev_probe(subdev, res);
-		if (err)
+		if (err) {
+			kfree(subdev->name);
+			subdev->name = NULL;
 			break;
+		}
 	}
 	info->nr_subdev = i;
 
diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c
deleted file mode 100644
index d5374cdcb16..00000000000
--- a/drivers/mtd/maps/sbc8240.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * Handle mapping of the flash memory access routines on the SBC8240 board.
- *
- * Carolyn Smith, Tektronix, Inc.
- *
- * This code is GPLed
- */
-
-/*
- * The SBC8240 has 2 flash banks.
- * Bank 0 is a 512 KiB AMD AM29F040B; 8 x 64 KiB sectors.
- * It contains the U-Boot code (7 sectors) and the environment (1 sector).
- * Bank 1 is 4 x 1 MiB AMD AM29LV800BT; 15 x 64 KiB sectors, 1 x 32 KiB sector,
- * 2 x 8 KiB sectors, 1 x 16 KiB sectors.
- * Both parts are JEDEC compatible.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/cfi.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-
-#define	DEBUG
-
-#ifdef	DEBUG
-# define debugk(fmt,args...)	printk(fmt ,##args)
-#else
-# define debugk(fmt,args...)
-#endif
-
-
-#define WINDOW_ADDR0	0xFFF00000		/* 512 KiB */
-#define WINDOW_SIZE0	0x00080000
-#define BUSWIDTH0	1
-
-#define WINDOW_ADDR1	0xFF000000		/* 4 MiB */
-#define WINDOW_SIZE1	0x00400000
-#define BUSWIDTH1	8
-
-#define MSG_PREFIX "sbc8240:"	/* prefix for our printk()'s */
-#define MTDID	   "sbc8240-%d"	/* for mtdparts= partitioning */
-
-
-static struct map_info sbc8240_map[2] = {
-	{
-		.name           = "sbc8240 Flash Bank #0",
-		.size           = WINDOW_SIZE0,
-		.bankwidth       = BUSWIDTH0,
-	},
-	{
-		.name           = "sbc8240 Flash Bank #1",
-		.size           = WINDOW_SIZE1,
-		.bankwidth       = BUSWIDTH1,
-	}
-};
-
-#define NUM_FLASH_BANKS	ARRAY_SIZE(sbc8240_map)
-
-/*
- * The following defines the partition layout of SBC8240 boards.
- *
- * See include/linux/mtd/partitions.h for definition of the
- * mtd_partition structure.
- *
- * The *_max_flash_size is the maximum possible mapped flash size
- * which is not necessarily the actual flash size. It must correspond
- * to the value specified in the mapping definition defined by the
- * "struct map_desc *_io_desc" for the corresponding machine.
- */
-
-#ifdef CONFIG_MTD_PARTITIONS
-
-static struct mtd_partition sbc8240_uboot_partitions [] = {
-	/* Bank 0 */
-	{
-		.name =	"U-boot",			/* U-Boot Firmware	*/
-		.offset =	0,
-		.size =	0x00070000,			/*  7 x 64 KiB sectors 	*/
-		.mask_flags = MTD_WRITEABLE,		/*  force read-only	*/
-	},
-	{
-		.name =	"environment",			/* U-Boot environment	*/
-		.offset =	0x00070000,
-		.size =	0x00010000,			/*  1 x 64 KiB sector	*/
-	},
-};
-
-static struct mtd_partition sbc8240_fs_partitions [] = {
-	{
-		.name =	"jffs",				/* JFFS  filesystem	*/
-		.offset =	0,
-		.size =	0x003C0000,			/*  4 * 15 * 64KiB	*/
-	},
-	{
-		.name =	"tmp32",
-		.offset =	0x003C0000,
-		.size =	0x00020000,			/*  4 * 32KiB		*/
-	},
-	{
-		.name =	"tmp8a",
-		.offset =	0x003E0000,
-		.size =	0x00008000,			/*  4 * 8KiB		*/
-	},
-	{
-		.name =	"tmp8b",
-		.offset =	0x003E8000,
-		.size =	0x00008000,			/*  4 * 8KiB		*/
-	},
-	{
-		.name =	"tmp16",
-		.offset =	0x003F0000,
-		.size =	0x00010000,			/*  4 * 16KiB		*/
-	}
-};
-
-/* trivial struct to describe partition information */
-struct mtd_part_def
-{
-	int nums;
-	unsigned char *type;
-	struct mtd_partition* mtd_part;
-};
-
-static struct mtd_info *sbc8240_mtd[NUM_FLASH_BANKS];
-static struct mtd_part_def sbc8240_part_banks[NUM_FLASH_BANKS];
-
-
-#endif	/* CONFIG_MTD_PARTITIONS */
-
-
-static int __init init_sbc8240_mtd (void)
-{
-	static struct _cjs {
-		u_long addr;
-		u_long size;
-	} pt[NUM_FLASH_BANKS] = {
-		{
-			.addr = WINDOW_ADDR0,
-			.size = WINDOW_SIZE0
-		},
-		{
-			.addr = WINDOW_ADDR1,
-			.size = WINDOW_SIZE1
-		},
-	};
-
-	int devicesfound = 0;
-	int i,j;
-
-	for (i = 0; i < NUM_FLASH_BANKS; i++) {
-		printk (KERN_NOTICE MSG_PREFIX
-			"Probing 0x%08lx at 0x%08lx\n", pt[i].size, pt[i].addr);
-
-		sbc8240_map[i].map_priv_1 =
-			(unsigned long) ioremap (pt[i].addr, pt[i].size);
-		if (!sbc8240_map[i].map_priv_1) {
-			printk (MSG_PREFIX "failed to ioremap\n");
-			for (j = 0; j < i; j++) {
-				iounmap((void *) sbc8240_map[j].map_priv_1);
-				sbc8240_map[j].map_priv_1 = 0;
-			}
-			return -EIO;
-		}
-		simple_map_init(&sbc8240_mtd[i]);
-
-		sbc8240_mtd[i] = do_map_probe("jedec_probe", &sbc8240_map[i]);
-
-		if (sbc8240_mtd[i]) {
-			sbc8240_mtd[i]->module = THIS_MODULE;
-			devicesfound++;
-		} else {
-			if (sbc8240_map[i].map_priv_1) {
-				iounmap((void *) sbc8240_map[i].map_priv_1);
-				sbc8240_map[i].map_priv_1 = 0;
-			}
-		}
-	}
-
-	if (!devicesfound) {
-		printk(KERN_NOTICE MSG_PREFIX
-		       "No suppported flash chips found!\n");
-		return -ENXIO;
-	}
-
-#ifdef CONFIG_MTD_PARTITIONS
-	sbc8240_part_banks[0].mtd_part   = sbc8240_uboot_partitions;
-	sbc8240_part_banks[0].type       = "static image";
-	sbc8240_part_banks[0].nums       = ARRAY_SIZE(sbc8240_uboot_partitions);
-	sbc8240_part_banks[1].mtd_part   = sbc8240_fs_partitions;
-	sbc8240_part_banks[1].type       = "static file system";
-	sbc8240_part_banks[1].nums       = ARRAY_SIZE(sbc8240_fs_partitions);
-
-	for (i = 0; i < NUM_FLASH_BANKS; i++) {
-
-		if (!sbc8240_mtd[i]) continue;
-		if (sbc8240_part_banks[i].nums == 0) {
-			printk (KERN_NOTICE MSG_PREFIX
-				"No partition info available, registering whole device\n");
-			add_mtd_device(sbc8240_mtd[i]);
-		} else {
-			printk (KERN_NOTICE MSG_PREFIX
-				"Using %s partition definition\n", sbc8240_part_banks[i].mtd_part->name);
-			add_mtd_partitions (sbc8240_mtd[i],
-					    sbc8240_part_banks[i].mtd_part,
-					    sbc8240_part_banks[i].nums);
-		}
-	}
-#else
-	printk(KERN_NOTICE MSG_PREFIX
-	       "Registering %d flash banks at once\n", devicesfound);
-
-	for (i = 0; i < devicesfound; i++) {
-		add_mtd_device(sbc8240_mtd[i]);
-	}
-#endif	/* CONFIG_MTD_PARTITIONS */
-
-	return devicesfound == 0 ? -ENXIO : 0;
-}
-
-static void __exit cleanup_sbc8240_mtd (void)
-{
-	int i;
-
-	for (i = 0; i < NUM_FLASH_BANKS; i++) {
-		if (sbc8240_mtd[i]) {
-			del_mtd_device (sbc8240_mtd[i]);
-			map_destroy (sbc8240_mtd[i]);
-		}
-		if (sbc8240_map[i].map_priv_1) {
-			iounmap ((void *) sbc8240_map[i].map_priv_1);
-			sbc8240_map[i].map_priv_1 = 0;
-		}
-	}
-}
-
-module_init (init_sbc8240_mtd);
-module_exit (cleanup_sbc8240_mtd);
-
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR ("Carolyn Smith <carolyn.smith@tektronix.com>");
-MODULE_DESCRIPTION ("MTD map driver for SBC8240 boards");
-
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index c3f62654b6d..7baba40c1ed 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -144,7 +144,7 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
 	struct mtd_blktrans_ops *tr = dev->tr;
 	int ret = -ENODEV;
 
-	if (!try_module_get(dev->mtd->owner))
+	if (!get_mtd_device(NULL, dev->mtd->index))
 		goto out;
 
 	if (!try_module_get(tr->owner))
@@ -158,7 +158,7 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
 	ret = 0;
 	if (tr->open && (ret = tr->open(dev))) {
 		dev->mtd->usecount--;
-		module_put(dev->mtd->owner);
+		put_mtd_device(dev->mtd);
 	out_tr:
 		module_put(tr->owner);
 	}
@@ -177,7 +177,7 @@ static int blktrans_release(struct gendisk *disk, fmode_t mode)
 
 	if (!ret) {
 		dev->mtd->usecount--;
-		module_put(dev->mtd->owner);
+		put_mtd_device(dev->mtd);
 		module_put(tr->owner);
 	}
 
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 208c6faa035..77db5ce24d9 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -29,6 +29,8 @@ static struct mtdblk_dev {
 	enum { STATE_EMPTY, STATE_CLEAN, STATE_DIRTY } cache_state;
 } *mtdblks[MAX_MTD_DEVICES];
 
+static struct mutex mtdblks_lock;
+
 /*
  * Cache stuff...
  *
@@ -270,15 +272,19 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd)
 
 	DEBUG(MTD_DEBUG_LEVEL1,"mtdblock_open\n");
 
+	mutex_lock(&mtdblks_lock);
 	if (mtdblks[dev]) {
 		mtdblks[dev]->count++;
+		mutex_unlock(&mtdblks_lock);
 		return 0;
 	}
 
 	/* OK, it's not open. Create cache info for it */
 	mtdblk = kzalloc(sizeof(struct mtdblk_dev), GFP_KERNEL);
-	if (!mtdblk)
+	if (!mtdblk) {
+		mutex_unlock(&mtdblks_lock);
 		return -ENOMEM;
+	}
 
 	mtdblk->count = 1;
 	mtdblk->mtd = mtd;
@@ -291,6 +297,7 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd)
 	}
 
 	mtdblks[dev] = mtdblk;
+	mutex_unlock(&mtdblks_lock);
 
 	DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
 
@@ -304,6 +311,8 @@ static int mtdblock_release(struct mtd_blktrans_dev *mbd)
 
    	DEBUG(MTD_DEBUG_LEVEL1, "mtdblock_release\n");
 
+	mutex_lock(&mtdblks_lock);
+
 	mutex_lock(&mtdblk->cache_mutex);
 	write_cached_data(mtdblk);
 	mutex_unlock(&mtdblk->cache_mutex);
@@ -316,6 +325,9 @@ static int mtdblock_release(struct mtd_blktrans_dev *mbd)
 		vfree(mtdblk->cache_data);
 		kfree(mtdblk);
 	}
+
+	mutex_unlock(&mtdblks_lock);
+
 	DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
 
 	return 0;
@@ -376,6 +388,8 @@ static struct mtd_blktrans_ops mtdblock_tr = {
 
 static int __init init_mtdblock(void)
 {
+	mutex_init(&mtdblks_lock);
+
 	return register_mtd_blktrans(&mtdblock_tr);
 }
 
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index fac54a3fa3f..00ebf7af746 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -65,8 +65,8 @@ static void mtd_release(struct device *dev)
 static int mtd_cls_suspend(struct device *dev, pm_message_t state)
 {
 	struct mtd_info *mtd = dev_to_mtd(dev);
-	
-	if (mtd->suspend)
+
+	if (mtd && mtd->suspend)
 		return mtd->suspend(mtd);
 	else
 		return 0;
@@ -76,7 +76,7 @@ static int mtd_cls_resume(struct device *dev)
 {
 	struct mtd_info *mtd = dev_to_mtd(dev);
 	
-	if (mtd->resume)
+	if (mtd && mtd->resume)
 		mtd->resume(mtd);
 	return 0;
 }
@@ -298,6 +298,7 @@ int add_mtd_device(struct mtd_info *mtd)
 			mtd->dev.class = &mtd_class;
 			mtd->dev.devt = MTD_DEVT(i);
 			dev_set_name(&mtd->dev, "mtd%d", i);
+			dev_set_drvdata(&mtd->dev, mtd);
 			if (device_register(&mtd->dev) != 0) {
 				mtd_table[i] = NULL;
 				break;
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 2802992b39d..20c828ba940 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -534,7 +534,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 							 &num_partitions);
 
 	if ((!partitions) || (num_partitions == 0)) {
-		printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
+		printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n");
 		res = ENXIO;
 		goto err_no_partitions;
 	}
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 0cd76f89f4b..ebd07e95b81 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -11,6 +11,8 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -541,7 +543,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
 	unsigned long timeo = jiffies;
-	int status, state = this->state;
+	int status = NAND_STATUS_FAIL, state = this->state;
 
 	if (state == FL_ERASING)
 		timeo += (HZ * 400) / 1000;
@@ -556,8 +558,9 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
 
 	while (time_before(jiffies, timeo)) {
 		status = __raw_readb(this->IO_ADDR_R);
-		if (!(status & 0x40))
+		if (status & NAND_STATUS_READY)
 			break;
+		cond_resched();
 	}
 	return status;
 }
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 7ad972229db..0d9d4bc9c76 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -61,7 +61,7 @@ static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 	buf64 = (uint64_t *)buf;
 	while (i < len/8) {
 		uint64_t x;
-		asm ("ldrd\t%0, [%1]" : "=r" (x) : "r" (io_base));
+		asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base));
 		buf64[i++] = x;
 	}
 	i *= 8;
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 11dc7e69c4f..7dc854c3fd8 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -816,7 +816,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 	nmtd->mtd.owner    = THIS_MODULE;
 	nmtd->set	   = set;
 
-	if (hardware_ecc) {
+	if (!(info->platform && info->platform->software_ecc) && hardware_ecc) {
 		chip->ecc.calculate = s3c2410_nand_calculate_ecc;
 		chip->ecc.correct   = s3c2410_nand_correct_data;
 		chip->ecc.mode	    = NAND_ECC_HW;
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index e3f8495a94c..1002e188299 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -135,16 +135,17 @@ static void nftl_remove_dev(struct mtd_blktrans_dev *dev)
 int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
 		  size_t *retlen, uint8_t *buf)
 {
+	loff_t mask = mtd->writesize - 1;
 	struct mtd_oob_ops ops;
 	int res;
 
 	ops.mode = MTD_OOB_PLACE;
-	ops.ooboffs = offs & (mtd->writesize - 1);
+	ops.ooboffs = offs & mask;
 	ops.ooblen = len;
 	ops.oobbuf = buf;
 	ops.datbuf = NULL;
 
-	res = mtd->read_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+	res = mtd->read_oob(mtd, offs & ~mask, &ops);
 	*retlen = ops.oobretlen;
 	return res;
 }
@@ -155,16 +156,17 @@ int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
 int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
 		   size_t *retlen, uint8_t *buf)
 {
+	loff_t mask = mtd->writesize - 1;
 	struct mtd_oob_ops ops;
 	int res;
 
 	ops.mode = MTD_OOB_PLACE;
-	ops.ooboffs = offs & (mtd->writesize - 1);
+	ops.ooboffs = offs & mask;
 	ops.ooblen = len;
 	ops.oobbuf = buf;
 	ops.datbuf = NULL;
 
-	res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+	res = mtd->write_oob(mtd, offs & ~mask, &ops);
 	*retlen = ops.oobretlen;
 	return res;
 }
@@ -177,17 +179,18 @@ int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
 static int nftl_write(struct mtd_info *mtd, loff_t offs, size_t len,
 		      size_t *retlen, uint8_t *buf, uint8_t *oob)
 {
+	loff_t mask = mtd->writesize - 1;
 	struct mtd_oob_ops ops;
 	int res;
 
 	ops.mode = MTD_OOB_PLACE;
-	ops.ooboffs = offs;
+	ops.ooboffs = offs & mask;
 	ops.ooblen = mtd->oobsize;
 	ops.oobbuf = oob;
 	ops.datbuf = buf;
 	ops.len = len;
 
-	res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+	res = mtd->write_oob(mtd, offs & ~mask, &ops);
 	*retlen = ops.retlen;
 	return res;
 }
@@ -208,7 +211,7 @@ static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate )
 	/* Normally, we force a fold to happen before we run out of free blocks completely */
 	if (!desperate && nftl->numfreeEUNs < 2) {
 		DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n");
-		return 0xffff;
+		return BLOCK_NIL;
 	}
 
 	/* Scan for a free block */
@@ -230,11 +233,11 @@ static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate )
 			printk("Argh! No free blocks found! LastFreeEUN = %d, "
 			       "FirstEUN = %d\n", nftl->LastFreeEUN,
 			       le16_to_cpu(nftl->MediaHdr.FirstPhysicalEUN));
-			return 0xffff;
+			return BLOCK_NIL;
 		}
 	} while (pot != nftl->LastFreeEUN);
 
-	return 0xffff;
+	return BLOCK_NIL;
 }
 
 static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned pendingblock )
@@ -431,7 +434,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
 
 	/* add the header so that it is now a valid chain */
 	oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC);
-	oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff;
+	oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = BLOCK_NIL;
 
 	nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 8,
 		       8, &retlen, (char *)&oob.u);
@@ -515,7 +518,7 @@ static u16 NFTL_makefreeblock( struct NFTLrecord *nftl , unsigned pendingblock)
 	if (ChainLength < 2) {
 		printk(KERN_WARNING "No Virtual Unit Chains available for folding. "
 		       "Failing request\n");
-		return 0xffff;
+		return BLOCK_NIL;
 	}
 
 	return NFTL_foldchain (nftl, LongestChain, pendingblock);
@@ -578,7 +581,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block)
 				printk(KERN_WARNING
 				       "Infinite loop in Virtual Unit Chain 0x%x\n",
 				       thisVUC);
-				return 0xffff;
+				return BLOCK_NIL;
 			}
 
 			/* Skip to next block in chain */
@@ -601,7 +604,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block)
 			//u16 startEUN = nftl->EUNtable[thisVUC];
 
 			//printk("Write to VirtualUnitChain %d, calling makefreeblock()\n", thisVUC);
-			writeEUN = NFTL_makefreeblock(nftl, 0xffff);
+			writeEUN = NFTL_makefreeblock(nftl, BLOCK_NIL);
 
 			if (writeEUN == BLOCK_NIL) {
 				/* OK, we accept that the above comment is
@@ -673,7 +676,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block)
 
 	printk(KERN_WARNING "Error folding to make room for Virtual Unit Chain 0x%x\n",
 	       thisVUC);
-	return 0xffff;
+	return BLOCK_NIL;
 }
 
 static int nftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block,
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 38d656b9b2e..0108ed42e87 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -266,7 +266,7 @@ static inline int omap2_onenand_bufferram_offset(struct mtd_info *mtd, int area)
 
 	if (ONENAND_CURRENT_BUFFERRAM(this)) {
 		if (area == ONENAND_DATARAM)
-			return mtd->writesize;
+			return this->writesize;
 		if (area == ONENAND_SPARERAM)
 			return mtd->oobsize;
 	}
@@ -770,6 +770,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
 	}
 	iounmap(c->onenand.base);
 	release_mem_region(c->phys_base, ONENAND_IO_SIZE);
+	gpmc_cs_free(c->gpmc_cs);
 	kfree(c);
 
 	return 0;
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 286ed594e5a..e1f7d0a78b9 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -657,6 +657,11 @@ static int io_init(struct ubi_device *ubi)
 	if (ubi->mtd->block_isbad && ubi->mtd->block_markbad)
 		ubi->bad_allowed = 1;
 
+	if (ubi->mtd->type == MTD_NORFLASH) {
+		ubi_assert(ubi->mtd->writesize == 1);
+		ubi->nor_flash = 1;
+	}
+
 	ubi->min_io_size = ubi->mtd->writesize;
 	ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft;
 
@@ -996,6 +1001,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	ubi_msg("number of PEBs reserved for bad PEB handling: %d",
 		ubi->beb_rsvd_pebs);
 	ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
+	ubi_msg("image sequence number: %d", ubi->image_seq);
 
 	/*
 	 * The below lock makes sure we do not race with 'ubi_thread()' which
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index c0ed60e8ade..54b0186915f 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -44,6 +44,8 @@ void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
 	       be32_to_cpu(ec_hdr->vid_hdr_offset));
 	printk(KERN_DEBUG "\tdata_offset    %d\n",
 	       be32_to_cpu(ec_hdr->data_offset));
+	printk(KERN_DEBUG "\timage_seq      %d\n",
+	       be32_to_cpu(ec_hdr->image_seq));
 	printk(KERN_DEBUG "\thdr_crc        %#08x\n",
 	       be32_to_cpu(ec_hdr->hdr_crc));
 	printk(KERN_DEBUG "erase counter header hexdump:\n");
diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h
index 13777e5beac..a4da7a09b94 100644
--- a/drivers/mtd/ubi/debug.h
+++ b/drivers/mtd/ubi/debug.h
@@ -93,6 +93,12 @@ void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
 #define UBI_IO_DEBUG 0
 #endif
 
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len);
+#else
+#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0
+#endif
+
 #ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
 #define DBG_DISABLE_BGT 1
 #else
@@ -167,6 +173,7 @@ static inline int ubi_dbg_is_erase_failure(void)
 #define ubi_dbg_is_bitflip()       0
 #define ubi_dbg_is_write_failure() 0
 #define ubi_dbg_is_erase_failure() 0
+#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0
 
 #endif /* !CONFIG_MTD_UBI_DEBUG */
 #endif /* !__UBI_DEBUG_H__ */
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 0f2034c3ed2..e4d9ef0c965 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -1254,6 +1254,7 @@ out_free:
 		if (!ubi->volumes[i])
 			continue;
 		kfree(ubi->volumes[i]->eba_tbl);
+		ubi->volumes[i]->eba_tbl = NULL;
 	}
 	return err;
 }
diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index 95aaac03f93..b5e478fa266 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -332,6 +332,7 @@ static int gluebi_create(struct ubi_device_info *di,
 	}
 
 	gluebi->vol_id = vi->vol_id;
+	gluebi->ubi_num = vi->ubi_num;
 	mtd->type = MTD_UBIVOLUME;
 	if (!di->ro_mode)
 		mtd->flags = MTD_WRITEABLE;
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index effaff28bab..4cb69925d8d 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -98,17 +98,12 @@ static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
 static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum);
 static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
 				  const struct ubi_vid_hdr *vid_hdr);
-static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
-				 int len);
-static int paranoid_check_empty(struct ubi_device *ubi, int pnum);
 #else
 #define paranoid_check_not_bad(ubi, pnum) 0
 #define paranoid_check_peb_ec_hdr(ubi, pnum)  0
 #define paranoid_check_ec_hdr(ubi, pnum, ec_hdr)  0
 #define paranoid_check_peb_vid_hdr(ubi, pnum) 0
 #define paranoid_check_vid_hdr(ubi, pnum, vid_hdr) 0
-#define paranoid_check_all_ff(ubi, pnum, offset, len) 0
-#define paranoid_check_empty(ubi, pnum) 0
 #endif
 
 /**
@@ -244,7 +239,7 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
 		return err > 0 ? -EINVAL : err;
 
 	/* The area we are writing to has to contain all 0xFF bytes */
-	err = paranoid_check_all_ff(ubi, pnum, offset, len);
+	err = ubi_dbg_check_all_ff(ubi, pnum, offset, len);
 	if (err)
 		return err > 0 ? -EINVAL : err;
 
@@ -271,8 +266,8 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
 	addr = (loff_t)pnum * ubi->peb_size + offset;
 	err = ubi->mtd->write(ubi->mtd, addr, len, &written, buf);
 	if (err) {
-		ubi_err("error %d while writing %d bytes to PEB %d:%d, written"
-			" %zd bytes", err, len, pnum, offset, written);
+		ubi_err("error %d while writing %d bytes to PEB %d:%d, written "
+			"%zd bytes", err, len, pnum, offset, written);
 		ubi_dbg_dump_stack();
 	} else
 		ubi_assert(written == len);
@@ -350,7 +345,7 @@ retry:
 		return -EIO;
 	}
 
-	err = paranoid_check_all_ff(ubi, pnum, 0, ubi->peb_size);
+	err = ubi_dbg_check_all_ff(ubi, pnum, 0, ubi->peb_size);
 	if (err)
 		return err > 0 ? -EINVAL : err;
 
@@ -459,6 +454,54 @@ out:
 }
 
 /**
+ * nor_erase_prepare - prepare a NOR flash PEB for erasure.
+ * @ubi: UBI device description object
+ * @pnum: physical eraseblock number to prepare
+ *
+ * NOR flash, or at least some of them, have peculiar embedded PEB erasure
+ * algorithm: the PEB is first filled with zeroes, then it is erased. And
+ * filling with zeroes starts from the end of the PEB. This was observed with
+ * Spansion S29GL512N NOR flash.
+ *
+ * This means that in case of a power cut we may end up with intact data at the
+ * beginning of the PEB, and all zeroes at the end of PEB. In other words, the
+ * EC and VID headers are OK, but a large chunk of data at the end of PEB is
+ * zeroed. This makes UBI mistakenly treat this PEB as used and associate it
+ * with an LEB, which leads to subsequent failures (e.g., UBIFS fails).
+ *
+ * This function is called before erasing NOR PEBs and it zeroes out EC and VID
+ * magic numbers in order to invalidate them and prevent the failures. Returns
+ * zero in case of success and a negative error code in case of failure.
+ */
+static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
+{
+	int err;
+	size_t written;
+	loff_t addr;
+	uint32_t data = 0;
+
+	addr = (loff_t)pnum * ubi->peb_size;
+	err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
+	if (err) {
+		ubi_err("error %d while writing 4 bytes to PEB %d:%d, written "
+			"%zd bytes", err, pnum, 0, written);
+		ubi_dbg_dump_stack();
+		return err;
+	}
+
+	addr += ubi->vid_hdr_aloffset;
+	err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
+	if (err) {
+		ubi_err("error %d while writing 4 bytes to PEB %d:%d, written "
+			"%zd bytes", err, pnum, ubi->vid_hdr_aloffset, written);
+		ubi_dbg_dump_stack();
+		return err;
+	}
+
+	return 0;
+}
+
+/**
  * ubi_io_sync_erase - synchronously erase a physical eraseblock.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock number to erase
@@ -489,6 +532,12 @@ int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture)
 		return -EROFS;
 	}
 
+	if (ubi->nor_flash) {
+		err = nor_erase_prepare(ubi, pnum);
+		if (err)
+			return err;
+	}
+
 	if (torture) {
 		ret = torture_peb(ubi, pnum);
 		if (ret < 0)
@@ -672,11 +721,6 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 		if (read_err != -EBADMSG &&
 		    check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
 			/* The physical eraseblock is supposedly empty */
-			err = paranoid_check_all_ff(ubi, pnum, 0,
-						    ubi->peb_size);
-			if (err)
-				return err > 0 ? UBI_IO_BAD_EC_HDR : err;
-
 			if (verbose)
 				ubi_warn("no EC header found at PEB %d, "
 					 "only 0xFF bytes", pnum);
@@ -752,6 +796,7 @@ int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum,
 	ec_hdr->version = UBI_VERSION;
 	ec_hdr->vid_hdr_offset = cpu_to_be32(ubi->vid_hdr_offset);
 	ec_hdr->data_offset = cpu_to_be32(ubi->leb_start);
+	ec_hdr->image_seq = cpu_to_be32(ubi->image_seq);
 	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
 	ec_hdr->hdr_crc = cpu_to_be32(crc);
 
@@ -947,15 +992,6 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
 		if (read_err != -EBADMSG &&
 		    check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
 			/* The physical eraseblock is supposedly free */
-
-			/*
-			 * The below is just a paranoid check, it has to be
-			 * compiled out if paranoid checks are disabled.
-			 */
-			err = paranoid_check_empty(ubi, pnum);
-			if (err)
-				return err > 0 ? UBI_IO_BAD_VID_HDR : err;
-
 			if (verbose)
 				ubi_warn("no VID header found at PEB %d, "
 					 "only 0xFF bytes", pnum);
@@ -1229,7 +1265,7 @@ exit:
 }
 
 /**
- * paranoid_check_all_ff - check that a region of flash is empty.
+ * ubi_dbg_check_all_ff - check that a region of flash is empty.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  * @offset: the starting offset within the physical eraseblock to check
@@ -1239,8 +1275,7 @@ exit:
  * @offset of the physical eraseblock @pnum, %1 if not, and a negative error
  * code if an error occurred.
  */
-static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
-				 int len)
+int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
 {
 	size_t read;
 	int err;
@@ -1276,74 +1311,4 @@ error:
 	return err;
 }
 
-/**
- * paranoid_check_empty - whether a PEB is empty.
- * @ubi: UBI device description object
- * @pnum: the physical eraseblock number to check
- *
- * This function makes sure PEB @pnum is empty, which means it contains only
- * %0xFF data bytes. Returns zero if the PEB is empty, %1 if not, and a
- * negative error code in case of failure.
- *
- * Empty PEBs have the EC header, and do not have the VID header. The caller of
- * this function should have already made sure the PEB does not have the VID
- * header. However, this function re-checks that, because it is possible that
- * the header and data has already been written to the PEB.
- *
- * Let's consider a possible scenario. Suppose there are 2 tasks - A and B.
- * Task A is in 'wear_leveling_worker()'. It is reading VID header of PEB X to
- * find which LEB it corresponds to. PEB X is currently unmapped, and has no
- * VID header. Task B is trying to write to PEB X.
- *
- * Task A: in 'ubi_io_read_vid_hdr()': reads the VID header from PEB X. The
- *         read data contain all 0xFF bytes;
- * Task B: writes VID header and some data to PEB X;
- * Task A: assumes PEB X is empty, calls 'paranoid_check_empty()'. And if we
- *         do not re-read the VID header, and do not cancel the checking if it
- *         is there, we fail.
- */
-static int paranoid_check_empty(struct ubi_device *ubi, int pnum)
-{
-	int err, offs = ubi->vid_hdr_aloffset, len = ubi->vid_hdr_alsize;
-	size_t read;
-	uint32_t magic;
-	const struct ubi_vid_hdr *vid_hdr;
-
-	mutex_lock(&ubi->dbg_buf_mutex);
-	err = ubi->mtd->read(ubi->mtd, offs, len, &read, ubi->dbg_peb_buf);
-	if (err && err != -EUCLEAN) {
-		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
-			"read %zd bytes", err, len, pnum, offs, read);
-		goto error;
-	}
-
-	vid_hdr = ubi->dbg_peb_buf;
-	magic = be32_to_cpu(vid_hdr->magic);
-	if (magic == UBI_VID_HDR_MAGIC)
-		/* The PEB contains VID header, so it is not empty */
-		goto out;
-
-	err = check_pattern(ubi->dbg_peb_buf, 0xFF, len);
-	if (err == 0) {
-		ubi_err("flash region at PEB %d:%d, length %d does not "
-			"contain all 0xFF bytes", pnum, offs, len);
-		goto fail;
-	}
-
-out:
-	mutex_unlock(&ubi->dbg_buf_mutex);
-	return 0;
-
-fail:
-	ubi_err("paranoid check failed for PEB %d", pnum);
-	ubi_msg("hex dump of the %d-%d region", offs, offs + len);
-	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
-		       ubi->dbg_peb_buf, len, 1);
-	err = 1;
-error:
-	ubi_dbg_dump_stack();
-	mutex_unlock(&ubi->dbg_buf_mutex);
-	return err;
-}
-
 #endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index c3d653ba5ca..b847745394b 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -757,6 +757,8 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 	si->is_empty = 0;
 
 	if (!ec_corr) {
+		int image_seq;
+
 		/* Make sure UBI version is OK */
 		if (ech->version != UBI_VERSION) {
 			ubi_err("this UBI version is %d, image version is %d",
@@ -778,6 +780,29 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 			ubi_dbg_dump_ec_hdr(ech);
 			return -EINVAL;
 		}
+
+		/*
+		 * Make sure that all PEBs have the same image sequence number.
+		 * This allows us to detect situations when users flash UBI
+		 * images incorrectly, so that the flash has the new UBI image
+		 * and leftovers from the old one. This feature was added
+		 * relatively recently, and the sequence number was always
+		 * zero, because old UBI implementations always set it to zero.
+		 * For this reasons, we do not panic if some PEBs have zero
+		 * sequence number, while other PEBs have non-zero sequence
+		 * number.
+		 */
+		image_seq = be32_to_cpu(ech->image_seq);
+		if (!si->image_seq_set) {
+			ubi->image_seq = image_seq;
+			si->image_seq_set = 1;
+		} else if (ubi->image_seq && ubi->image_seq != image_seq) {
+			ubi_err("bad image sequence number %d in PEB %d, "
+				"expected %d", image_seq, pnum, ubi->image_seq);
+			ubi_dbg_dump_ec_hdr(ech);
+			return -EINVAL;
+		}
+
 	}
 
 	/* OK, we've done with the EC header, let's look at the VID header */
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
index 61df208e2f2..1017cf12def 100644
--- a/drivers/mtd/ubi/scan.h
+++ b/drivers/mtd/ubi/scan.h
@@ -102,6 +102,7 @@ struct ubi_scan_volume {
  * @mean_ec: mean erase counter value
  * @ec_sum: a temporary variable used when calculating @mean_ec
  * @ec_count: a temporary variable used when calculating @mean_ec
+ * @image_seq_set: indicates @ubi->image_seq is known
  *
  * This data structure contains the result of scanning and may be used by other
  * UBI sub-systems to build final UBI data structures, further error-recovery
@@ -124,6 +125,7 @@ struct ubi_scan_info {
 	int mean_ec;
 	uint64_t ec_sum;
 	int ec_count;
+	int image_seq_set;
 };
 
 struct ubi_device;
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index 8419fdccc79..503ea9b2730 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -129,6 +129,7 @@ enum {
  * @ec: the erase counter
  * @vid_hdr_offset: where the VID header starts
  * @data_offset: where the user data start
+ * @image_seq: image sequence number
  * @padding2: reserved for future, zeroes
  * @hdr_crc: erase counter header CRC checksum
  *
@@ -144,6 +145,14 @@ enum {
  * volume identifier header and user data, relative to the beginning of the
  * physical eraseblock. These values have to be the same for all physical
  * eraseblocks.
+ *
+ * The @image_seq field is used to validate a UBI image that has been prepared
+ * for a UBI device. The @image_seq value can be any value, but it must be the
+ * same on all eraseblocks. UBI will ensure that all new erase counter headers
+ * also contain this value, and will check the value when scanning at start-up.
+ * One way to make use of @image_seq is to increase its value by one every time
+ * an image is flashed over an existing image, then, if the flashing does not
+ * complete, UBI will detect the error when scanning.
  */
 struct ubi_ec_hdr {
 	__be32  magic;
@@ -152,7 +161,8 @@ struct ubi_ec_hdr {
 	__be64  ec; /* Warning: the current limit is 31-bit anyway! */
 	__be32  vid_hdr_offset;
 	__be32  data_offset;
-	__u8    padding2[36];
+	__be32  image_seq;
+	__u8    padding2[32];
 	__be32  hdr_crc;
 } __attribute__ ((packed));
 
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 28acd133c99..6a5fe963378 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -301,6 +301,7 @@ struct ubi_wl_entry;
  *                @vol->readers, @vol->writers, @vol->exclusive,
  *                @vol->ref_count, @vol->mapping and @vol->eba_tbl.
  * @ref_count: count of references on the UBI device
+ * @image_seq: image sequence number recorded on EC headers
  *
  * @rsvd_pebs: count of reserved physical eraseblocks
  * @avail_pebs: count of available physical eraseblocks
@@ -372,6 +373,7 @@ struct ubi_wl_entry;
  * @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset
  * @bad_allowed: whether the MTD device admits of bad physical eraseblocks or
  *               not
+ * @nor_flash: non-zero if working on top of NOR flash
  * @mtd: MTD device descriptor
  *
  * @peb_buf1: a buffer of PEB size used for different purposes
@@ -390,6 +392,7 @@ struct ubi_device {
 	struct ubi_volume *volumes[UBI_MAX_VOLUMES+UBI_INT_VOL_COUNT];
 	spinlock_t volumes_lock;
 	int ref_count;
+	int image_seq;
 
 	int rsvd_pebs;
 	int avail_pebs;
@@ -452,7 +455,8 @@ struct ubi_device {
 	int vid_hdr_offset;
 	int vid_hdr_aloffset;
 	int vid_hdr_shift;
-	int bad_allowed;
+	unsigned int bad_allowed:1;
+	unsigned int nor_flash:1;
 	struct mtd_info *mtd;
 
 	void *peb_buf1;
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 2b247230061..600c7229d5c 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -459,6 +459,14 @@ retry:
 	dbg_wl("PEB %d EC %d", e->pnum, e->ec);
 	prot_queue_add(ubi, e);
 	spin_unlock(&ubi->wl_lock);
+
+	err = ubi_dbg_check_all_ff(ubi, e->pnum, ubi->vid_hdr_aloffset,
+				   ubi->peb_size - ubi->vid_hdr_aloffset);
+	if (err) {
+		ubi_err("new PEB %d does not contain all 0xFF bytes", e->pnum);
+		return err > 0 ? -EINVAL : err;
+	}
+
 	return e->pnum;
 }
 
diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
index 3e00fa8ea65..4a7c32895be 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/3c515.c
@@ -832,7 +832,9 @@ static int corkscrew_open(struct net_device *dev)
 			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
 			vp->rx_ring[i].addr = isa_virt_to_bus(skb->data);
 		}
-		vp->rx_ring[i - 1].next = isa_virt_to_bus(&vp->rx_ring[0]);	/* Wrap the ring. */
+		if (i != 0)
+			vp->rx_ring[i - 1].next =
+				isa_virt_to_bus(&vp->rx_ring[0]);	/* Wrap the ring. */
 		outl(isa_virt_to_bus(&vp->rx_ring[0]), ioaddr + UpListPtr);
 	}
 	if (vp->full_bus_master_tx) {	/* Boomerang bus master Tx. */
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index c34aee91250..45675889850 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -235,6 +235,7 @@ enum vortex_chips {
 	CH_3C900B_FL,
 	CH_3C905_1,
 	CH_3C905_2,
+	CH_3C905B_TX,
 	CH_3C905B_1,
 
 	CH_3C905B_2,
@@ -307,6 +308,8 @@ static struct vortex_chip_info {
 	 PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
 	{"3c905 Boomerang 100baseT4",
 	 PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
+	{"3C905B-TX Fast Etherlink XL PCI",
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
 	{"3c905B Cyclone 100baseTx",
 	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
 
@@ -389,6 +392,7 @@ static struct pci_device_id vortex_pci_tbl[] = {
 	{ 0x10B7, 0x900A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900B_FL },
 	{ 0x10B7, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_1 },
 	{ 0x10B7, 0x9051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_2 },
+	{ 0x10B7, 0x9054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_TX },
 	{ 0x10B7, 0x9055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_1 },
 
 	{ 0x10B7, 0x9058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_2 },
@@ -2721,13 +2725,15 @@ dump_tx_ring(struct net_device *dev)
 				   &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
 			issue_and_wait(dev, DownStall);
 			for (i = 0; i < TX_RING_SIZE; i++) {
-				pr_err("  %d: @%p  length %8.8x status %8.8x\n", i,
-					   &vp->tx_ring[i],
+				unsigned int length;
+
 #if DO_ZEROCOPY
-					   le32_to_cpu(vp->tx_ring[i].frag[0].length),
+				length = le32_to_cpu(vp->tx_ring[i].frag[0].length);
 #else
-					   le32_to_cpu(vp->tx_ring[i].length),
+				length = le32_to_cpu(vp->tx_ring[i].length);
 #endif
+				pr_err("  %d: @%p  length %8.8x status %8.8x\n",
+					   i, &vp->tx_ring[i], length,
 					   le32_to_cpu(vp->tx_ring[i].status));
 			}
 			if (!stalled)
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 50efde11ea6..d0dbbf39349 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -515,7 +515,7 @@ rx_status_loop:
 		dma_addr_t mapping;
 		struct sk_buff *skb, *new_skb;
 		struct cp_desc *desc;
-		unsigned buflen;
+		const unsigned buflen = cp->rx_buf_sz;
 
 		skb = cp->rx_skb[rx_tail];
 		BUG_ON(!skb);
@@ -549,8 +549,7 @@ rx_status_loop:
 			pr_debug("%s: rx slot %d status 0x%x len %d\n",
 			       dev->name, rx_tail, status, len);
 
-		buflen = cp->rx_buf_sz + NET_IP_ALIGN;
-		new_skb = netdev_alloc_skb(dev, buflen);
+		new_skb = netdev_alloc_skb(dev, buflen + NET_IP_ALIGN);
 		if (!new_skb) {
 			dev->stats.rx_dropped++;
 			goto rx_next;
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 8ae72ec1445..0e2ba21d444 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -908,6 +908,7 @@ static const struct net_device_ops rtl8139_netdev_ops = {
 	.ndo_open		= rtl8139_open,
 	.ndo_stop		= rtl8139_close,
 	.ndo_get_stats		= rtl8139_get_stats,
+	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= rtl8139_set_mac_address,
 	.ndo_start_xmit		= rtl8139_start_xmit,
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c155bd3ec9f..5ce7cbabd7a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1727,7 +1727,16 @@ config KS8842
 	tristate "Micrel KSZ8842"
 	depends on HAS_IOMEM
 	help
-	  This platform driver is for Micrel KSZ8842 chip.
+	  This platform driver is for Micrel KSZ8842 / KS8842
+	  2-port ethernet switch chip (managed, VLAN, QoS).
+
+config KS8851
+       tristate "Micrel KS8851 SPI"
+       depends on SPI
+       select MII
+	select CRC32
+       help
+         SPI driver for Micrel KS8851 SPI attached network chip.
 
 config VIA_RHINE
 	tristate "VIA Rhine support"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 4b58a59f211..ead8cab3cfe 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -88,6 +88,7 @@ obj-$(CONFIG_SKGE) += skge.o
 obj-$(CONFIG_SKY2) += sky2.o
 obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_KS8842)	+= ks8842.o
+obj-$(CONFIG_KS8851)	+= ks8851.o
 obj-$(CONFIG_VIA_RHINE) += via-rhine.o
 obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c
index 85a18175730..08787f5a22a 100644
--- a/drivers/net/a2065.c
+++ b/drivers/net/a2065.c
@@ -569,16 +569,8 @@ static int lance_start_xmit (struct sk_buff *skb, struct net_device *dev)
 
 #ifdef DEBUG_DRIVER
 	/* dump the packet */
-	{
-		int i;
-
-		for (i = 0; i < 64; i++) {
-			if ((i % 16) == 0)
-				printk("\n" KERN_DEBUG);
-			printk ("%2.2x ", skb->data [i]);
-		}
-		printk("\n");
-	}
+	print_hex_dump(KERN_DEBUG, "skb->data: ", DUMP_PREFIX_NONE,
+		       16, 1, skb->data, 64, true);
 #endif
 	entry = lp->tx_new & lp->tx_ring_mod_mask;
 	ib->btx_ring [entry].length = (-skblen) | 0xf000;
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index d6d4ab3b430..7d227cdab9f 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -158,15 +158,12 @@ module_exit(arcnet_exit);
 void arcnet_dump_skb(struct net_device *dev,
 		     struct sk_buff *skb, char *desc)
 {
-	int i;
+	char hdr[32];
 
-	printk(KERN_DEBUG "%6s: skb dump (%s) follows:", dev->name, desc);
-	for (i = 0; i < skb->len; i++) {
-		if (i % 16 == 0)
-			printk("\n" KERN_DEBUG "[%04X] ", i);
-		printk("%02X ", ((u_char *) skb->data)[i]);
-	}
-	printk("\n");
+	/* dump the packet */
+	snprintf(hdr, sizeof(hdr), "%6s:%s skb->data:", dev->name, desc);
+	print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET,
+		       16, 1, skb->data, skb->len, true);
 }
 
 EXPORT_SYMBOL(arcnet_dump_skb);
@@ -184,6 +181,7 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum,
 	int i, length;
 	unsigned long flags = 0;
 	static uint8_t buf[512];
+	char hdr[32];
 
 	/* hw.copy_from_card expects IRQ context so take the IRQ lock
 	   to keep it single threaded */
@@ -197,14 +195,10 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum,
 	/* if the offset[0] byte is nonzero, this is a 256-byte packet */
 	length = (buf[2] ? 256 : 512);
 
-	printk(KERN_DEBUG "%6s: packet dump (%s) follows:", dev->name, desc);
-	for (i = 0; i < length; i++) {
-		if (i % 16 == 0)
-			printk("\n" KERN_DEBUG "[%04X] ", i);
-		printk("%02X ", buf[i]);
-	}
-	printk("\n");
-
+	/* dump the packet */
+	snprintf(hdr, sizeof(hdr), "%6s:%s packet dump:", dev->name, desc);
+	print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET,
+		       16, 1, buf, length, true);
 }
 
 #else
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 2895db13bfa..c37ee9e6b67 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -63,3 +63,11 @@ config IXP4XX_ETH
 	help
 	  Say Y here if you want to use built-in Ethernet ports
 	  on IXP4xx processor.
+
+config W90P910_ETH
+	tristate "Nuvoton w90p910 Ethernet support"
+	depends on ARM && ARCH_W90X900
+	select PHYLIB
+	help
+	  Say Y here if you want to use built-in Ethernet ports
+	  on w90p910 processor.
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index 811a3ccd14c..303171f589e 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_ARM_AT91_ETHER)	+= at91_ether.o
 obj-$(CONFIG_ARM_KS8695_ETHER)	+= ks8695net.o
 obj-$(CONFIG_EP93XX_ETH)	+= ep93xx_eth.o
 obj-$(CONFIG_IXP4XX_ETH)	+= ixp4xx_eth.o
+obj-$(CONFIG_W90P910_ETH)	+= w90p910_ether.o
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 2e7419a6119..5041d10bae9 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -1228,7 +1228,6 @@ static int at91ether_resume(struct platform_device *pdev)
 #endif
 
 static struct platform_driver at91ether_driver = {
-	.probe		= at91ether_probe,
 	.remove		= __devexit_p(at91ether_remove),
 	.suspend	= at91ether_suspend,
 	.resume		= at91ether_resume,
@@ -1240,7 +1239,7 @@ static struct platform_driver at91ether_driver = {
 
 static int __init at91ether_init(void)
 {
-	return platform_driver_register(&at91ether_driver);
+	return platform_driver_probe(&at91ether_driver, at91ether_probe);
 }
 
 static void __exit at91ether_exit(void)
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 6f42ad72891..3fe09876e76 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -1142,7 +1142,9 @@ static const struct net_device_ops ixp4xx_netdev_ops = {
 	.ndo_start_xmit = eth_xmit,
 	.ndo_set_multicast_list = eth_set_mcast_list,
 	.ndo_do_ioctl = eth_ioctl,
-
+	.ndo_change_mtu = eth_change_mtu,
+	.ndo_set_mac_address = eth_mac_addr,
+	.ndo_validate_addr = eth_validate_addr,
 };
 
 static int __devinit eth_init_one(struct platform_device *pdev)
diff --git a/drivers/net/arm/w90p910_ether.c b/drivers/net/arm/w90p910_ether.c
new file mode 100644
index 00000000000..ddd231cb54b
--- /dev/null
+++ b/drivers/net/arm/w90p910_ether.c
@@ -0,0 +1,1105 @@
+/*
+ * Copyright (c) 2008-2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#define DRV_MODULE_NAME		"w90p910-emc"
+#define DRV_MODULE_VERSION	"0.1"
+
+/* Ethernet MAC Registers */
+#define REG_CAMCMR		0x00
+#define REG_CAMEN		0x04
+#define REG_CAMM_BASE		0x08
+#define REG_CAML_BASE		0x0c
+#define REG_TXDLSA		0x88
+#define REG_RXDLSA		0x8C
+#define REG_MCMDR		0x90
+#define REG_MIID		0x94
+#define REG_MIIDA		0x98
+#define REG_FFTCR		0x9C
+#define REG_TSDR		0xa0
+#define REG_RSDR		0xa4
+#define REG_DMARFC		0xa8
+#define REG_MIEN		0xac
+#define REG_MISTA		0xb0
+#define REG_CTXDSA		0xcc
+#define REG_CTXBSA		0xd0
+#define REG_CRXDSA		0xd4
+#define REG_CRXBSA		0xd8
+
+/* mac controller bit */
+#define MCMDR_RXON		0x01
+#define MCMDR_ACP		(0x01 << 3)
+#define MCMDR_SPCRC		(0x01 << 5)
+#define MCMDR_TXON		(0x01 << 8)
+#define MCMDR_FDUP		(0x01 << 18)
+#define MCMDR_ENMDC		(0x01 << 19)
+#define MCMDR_OPMOD		(0x01 << 20)
+#define SWR			(0x01 << 24)
+
+/* cam command regiser */
+#define CAMCMR_AUP		0x01
+#define CAMCMR_AMP		(0x01 << 1)
+#define CAMCMR_ABP		(0x01 << 2)
+#define CAMCMR_CCAM		(0x01 << 3)
+#define CAMCMR_ECMP		(0x01 << 4)
+#define CAM0EN			0x01
+
+/* mac mii controller bit */
+#define MDCCR			(0x0a << 20)
+#define PHYAD			(0x01 << 8)
+#define PHYWR			(0x01 << 16)
+#define PHYBUSY			(0x01 << 17)
+#define PHYPRESP		(0x01 << 18)
+#define CAM_ENTRY_SIZE		0x08
+
+/* rx and tx status */
+#define TXDS_TXCP		(0x01 << 19)
+#define RXDS_CRCE		(0x01 << 17)
+#define RXDS_PTLE		(0x01 << 19)
+#define RXDS_RXGD		(0x01 << 20)
+#define RXDS_ALIE		(0x01 << 21)
+#define RXDS_RP			(0x01 << 22)
+
+/* mac interrupt status*/
+#define MISTA_EXDEF		(0x01 << 19)
+#define MISTA_TXBERR		(0x01 << 24)
+#define MISTA_TDU		(0x01 << 23)
+#define MISTA_RDU		(0x01 << 10)
+#define MISTA_RXBERR		(0x01 << 11)
+
+#define ENSTART			0x01
+#define ENRXINTR		0x01
+#define ENRXGD			(0x01 << 4)
+#define ENRXBERR		(0x01 << 11)
+#define ENTXINTR		(0x01 << 16)
+#define ENTXCP			(0x01 << 18)
+#define ENTXABT			(0x01 << 21)
+#define ENTXBERR		(0x01 << 24)
+#define ENMDC			(0x01 << 19)
+#define PHYBUSY			(0x01 << 17)
+#define MDCCR_VAL		0xa00000
+
+/* rx and tx owner bit */
+#define RX_OWEN_DMA		(0x01 << 31)
+#define RX_OWEN_CPU		(~(0x03 << 30))
+#define TX_OWEN_DMA		(0x01 << 31)
+#define TX_OWEN_CPU		(~(0x01 << 31))
+
+/* tx frame desc controller bit */
+#define MACTXINTEN		0x04
+#define CRCMODE			0x02
+#define PADDINGMODE		0x01
+
+/* fftcr controller bit */
+#define TXTHD 			(0x03 << 8)
+#define BLENGTH			(0x01 << 20)
+
+/* global setting for driver */
+#define RX_DESC_SIZE		50
+#define TX_DESC_SIZE		10
+#define MAX_RBUFF_SZ		0x600
+#define MAX_TBUFF_SZ		0x600
+#define TX_TIMEOUT		50
+#define DELAY			1000
+#define CAM0			0x0
+
+static int w90p910_mdio_read(struct net_device *dev, int phy_id, int reg);
+
+struct w90p910_rxbd {
+	unsigned int sl;
+	unsigned int buffer;
+	unsigned int reserved;
+	unsigned int next;
+};
+
+struct w90p910_txbd {
+	unsigned int mode;
+	unsigned int buffer;
+	unsigned int sl;
+	unsigned int next;
+};
+
+struct recv_pdesc {
+	struct w90p910_rxbd desclist[RX_DESC_SIZE];
+	char recv_buf[RX_DESC_SIZE][MAX_RBUFF_SZ];
+};
+
+struct tran_pdesc {
+	struct w90p910_txbd desclist[TX_DESC_SIZE];
+	char tran_buf[RX_DESC_SIZE][MAX_TBUFF_SZ];
+};
+
+struct  w90p910_ether {
+	struct recv_pdesc *rdesc;
+	struct recv_pdesc *rdesc_phys;
+	struct tran_pdesc *tdesc;
+	struct tran_pdesc *tdesc_phys;
+	struct net_device_stats stats;
+	struct platform_device *pdev;
+	struct sk_buff *skb;
+	struct clk *clk;
+	struct clk *rmiiclk;
+	struct mii_if_info mii;
+	struct timer_list check_timer;
+	void __iomem *reg;
+	unsigned int rxirq;
+	unsigned int txirq;
+	unsigned int cur_tx;
+	unsigned int cur_rx;
+	unsigned int finish_tx;
+	unsigned int rx_packets;
+	unsigned int rx_bytes;
+	unsigned int start_tx_ptr;
+	unsigned int start_rx_ptr;
+	unsigned int linkflag;
+	spinlock_t lock;
+};
+
+static void update_linkspeed_register(struct net_device *dev,
+				unsigned int speed, unsigned int duplex)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	unsigned int val;
+
+	val = __raw_readl(ether->reg + REG_MCMDR);
+
+	if (speed == SPEED_100) {
+		/* 100 full/half duplex */
+		if (duplex == DUPLEX_FULL) {
+			val |= (MCMDR_OPMOD | MCMDR_FDUP);
+		} else {
+			val |= MCMDR_OPMOD;
+			val &= ~MCMDR_FDUP;
+		}
+	} else {
+		/* 10 full/half duplex */
+		if (duplex == DUPLEX_FULL) {
+			val |= MCMDR_FDUP;
+			val &= ~MCMDR_OPMOD;
+		} else {
+			val &= ~(MCMDR_FDUP | MCMDR_OPMOD);
+		}
+	}
+
+	__raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void update_linkspeed(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	struct platform_device *pdev;
+	unsigned int bmsr, bmcr, lpa, speed, duplex;
+
+	pdev = ether->pdev;
+
+	if (!mii_link_ok(&ether->mii)) {
+		ether->linkflag = 0x0;
+		netif_carrier_off(dev);
+		dev_warn(&pdev->dev, "%s: Link down.\n", dev->name);
+		return;
+	}
+
+	if (ether->linkflag == 1)
+		return;
+
+	bmsr = w90p910_mdio_read(dev, ether->mii.phy_id, MII_BMSR);
+	bmcr = w90p910_mdio_read(dev, ether->mii.phy_id, MII_BMCR);
+
+	if (bmcr & BMCR_ANENABLE) {
+		if (!(bmsr & BMSR_ANEGCOMPLETE))
+			return;
+
+		lpa = w90p910_mdio_read(dev, ether->mii.phy_id, MII_LPA);
+
+		if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF))
+			speed = SPEED_100;
+		else
+			speed = SPEED_10;
+
+		if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL))
+			duplex = DUPLEX_FULL;
+		else
+			duplex = DUPLEX_HALF;
+
+	} else {
+		speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
+		duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
+	}
+
+	update_linkspeed_register(dev, speed, duplex);
+
+	dev_info(&pdev->dev, "%s: Link now %i-%s\n", dev->name, speed,
+			(duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
+	ether->linkflag = 0x01;
+
+	netif_carrier_on(dev);
+}
+
+static void w90p910_check_link(unsigned long dev_id)
+{
+	struct net_device *dev = (struct net_device *) dev_id;
+	struct w90p910_ether *ether = netdev_priv(dev);
+
+	update_linkspeed(dev);
+	mod_timer(&ether->check_timer, jiffies + msecs_to_jiffies(1000));
+}
+
+static void w90p910_write_cam(struct net_device *dev,
+				unsigned int x, unsigned char *pval)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	unsigned int msw, lsw;
+
+	msw = (pval[0] << 24) | (pval[1] << 16) | (pval[2] << 8) | pval[3];
+
+	lsw = (pval[4] << 24) | (pval[5] << 16);
+
+	__raw_writel(lsw, ether->reg + REG_CAML_BASE + x * CAM_ENTRY_SIZE);
+	__raw_writel(msw, ether->reg + REG_CAMM_BASE + x * CAM_ENTRY_SIZE);
+}
+
+static void w90p910_init_desc(struct net_device *dev)
+{
+	struct w90p910_ether *ether;
+	struct w90p910_txbd  *tdesc, *tdesc_phys;
+	struct w90p910_rxbd  *rdesc, *rdesc_phys;
+	unsigned int i, j;
+
+	ether = netdev_priv(dev);
+
+	ether->tdesc = (struct tran_pdesc *)
+			dma_alloc_coherent(NULL, sizeof(struct tran_pdesc),
+				(dma_addr_t *) &ether->tdesc_phys, GFP_KERNEL);
+
+	ether->rdesc = (struct recv_pdesc *)
+			dma_alloc_coherent(NULL, sizeof(struct recv_pdesc),
+				(dma_addr_t *) &ether->rdesc_phys, GFP_KERNEL);
+
+	for (i = 0; i < TX_DESC_SIZE; i++) {
+		tdesc = &(ether->tdesc->desclist[i]);
+
+		j = ((i + 1) / TX_DESC_SIZE);
+
+		if (j != 0) {
+			tdesc_phys = &(ether->tdesc_phys->desclist[0]);
+			ether->start_tx_ptr = (unsigned int)tdesc_phys;
+			tdesc->next = (unsigned int)ether->start_tx_ptr;
+		} else {
+			tdesc_phys = &(ether->tdesc_phys->desclist[i+1]);
+			tdesc->next = (unsigned int)tdesc_phys;
+		}
+
+		tdesc->buffer = (unsigned int)ether->tdesc_phys->tran_buf[i];
+		tdesc->sl = 0;
+		tdesc->mode = 0;
+	}
+
+	for (i = 0; i < RX_DESC_SIZE; i++) {
+		rdesc = &(ether->rdesc->desclist[i]);
+
+		j = ((i + 1) / RX_DESC_SIZE);
+
+		if (j != 0) {
+			rdesc_phys = &(ether->rdesc_phys->desclist[0]);
+			ether->start_rx_ptr = (unsigned int)rdesc_phys;
+			rdesc->next = (unsigned int)ether->start_rx_ptr;
+		} else {
+			rdesc_phys = &(ether->rdesc_phys->desclist[i+1]);
+			rdesc->next = (unsigned int)rdesc_phys;
+		}
+
+		rdesc->sl = RX_OWEN_DMA;
+		rdesc->buffer = (unsigned int)ether->rdesc_phys->recv_buf[i];
+	  }
+}
+
+static void w90p910_set_fifo_threshold(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	unsigned int val;
+
+	val = TXTHD | BLENGTH;
+	__raw_writel(val, ether->reg + REG_FFTCR);
+}
+
+static void w90p910_return_default_idle(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	unsigned int val;
+
+	val = __raw_readl(ether->reg + REG_MCMDR);
+	val |= SWR;
+	__raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_trigger_rx(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+
+	__raw_writel(ENSTART, ether->reg + REG_RSDR);
+}
+
+static void w90p910_trigger_tx(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+
+	__raw_writel(ENSTART, ether->reg + REG_TSDR);
+}
+
+static void w90p910_enable_mac_interrupt(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	unsigned int val;
+
+	val = ENTXINTR | ENRXINTR | ENRXGD | ENTXCP;
+	val |= ENTXBERR | ENRXBERR | ENTXABT;
+
+	__raw_writel(val, ether->reg + REG_MIEN);
+}
+
+static void w90p910_get_and_clear_int(struct net_device *dev,
+							unsigned int *val)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+
+	*val = __raw_readl(ether->reg + REG_MISTA);
+	__raw_writel(*val, ether->reg + REG_MISTA);
+}
+
+static void w90p910_set_global_maccmd(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	unsigned int val;
+
+	val = __raw_readl(ether->reg + REG_MCMDR);
+	val |= MCMDR_SPCRC | MCMDR_ENMDC | MCMDR_ACP | ENMDC;
+	__raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_enable_cam(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	unsigned int val;
+
+	w90p910_write_cam(dev, CAM0, dev->dev_addr);
+
+	val = __raw_readl(ether->reg + REG_CAMEN);
+	val |= CAM0EN;
+	__raw_writel(val, ether->reg + REG_CAMEN);
+}
+
+static void w90p910_enable_cam_command(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	unsigned int val;
+
+	val = CAMCMR_ECMP | CAMCMR_ABP | CAMCMR_AMP;
+	__raw_writel(val, ether->reg + REG_CAMCMR);
+}
+
+static void w90p910_enable_tx(struct net_device *dev, unsigned int enable)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	unsigned int val;
+
+	val = __raw_readl(ether->reg + REG_MCMDR);
+
+	if (enable)
+		val |= MCMDR_TXON;
+	else
+		val &= ~MCMDR_TXON;
+
+	__raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_enable_rx(struct net_device *dev, unsigned int enable)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	unsigned int val;
+
+	val = __raw_readl(ether->reg + REG_MCMDR);
+
+	if (enable)
+		val |= MCMDR_RXON;
+	else
+		val &= ~MCMDR_RXON;
+
+	__raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_set_curdest(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+
+	__raw_writel(ether->start_rx_ptr, ether->reg + REG_RXDLSA);
+	__raw_writel(ether->start_tx_ptr, ether->reg + REG_TXDLSA);
+}
+
+static void w90p910_reset_mac(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+
+	spin_lock(&ether->lock);
+
+	w90p910_enable_tx(dev, 0);
+	w90p910_enable_rx(dev, 0);
+	w90p910_set_fifo_threshold(dev);
+	w90p910_return_default_idle(dev);
+
+	if (!netif_queue_stopped(dev))
+		netif_stop_queue(dev);
+
+	w90p910_init_desc(dev);
+
+	dev->trans_start = jiffies;
+	ether->cur_tx = 0x0;
+	ether->finish_tx = 0x0;
+	ether->cur_rx = 0x0;
+
+	w90p910_set_curdest(dev);
+	w90p910_enable_cam(dev);
+	w90p910_enable_cam_command(dev);
+	w90p910_enable_mac_interrupt(dev);
+	w90p910_enable_tx(dev, 1);
+	w90p910_enable_rx(dev, 1);
+	w90p910_trigger_tx(dev);
+	w90p910_trigger_rx(dev);
+
+	dev->trans_start = jiffies;
+
+	if (netif_queue_stopped(dev))
+		netif_wake_queue(dev);
+
+	spin_unlock(&ether->lock);
+}
+
+static void w90p910_mdio_write(struct net_device *dev,
+					int phy_id, int reg, int data)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	struct platform_device *pdev;
+	unsigned int val, i;
+
+	pdev = ether->pdev;
+
+	__raw_writel(data, ether->reg + REG_MIID);
+
+	val = (phy_id << 0x08) | reg;
+	val |= PHYBUSY | PHYWR | MDCCR_VAL;
+	__raw_writel(val, ether->reg + REG_MIIDA);
+
+	for (i = 0; i < DELAY; i++) {
+		if ((__raw_readl(ether->reg + REG_MIIDA) & PHYBUSY) == 0)
+			break;
+	}
+
+	if (i == DELAY)
+		dev_warn(&pdev->dev, "mdio write timed out\n");
+}
+
+static int w90p910_mdio_read(struct net_device *dev, int phy_id, int reg)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	struct platform_device *pdev;
+	unsigned int val, i, data;
+
+	pdev = ether->pdev;
+
+	val = (phy_id << 0x08) | reg;
+	val |= PHYBUSY | MDCCR_VAL;
+	__raw_writel(val, ether->reg + REG_MIIDA);
+
+	for (i = 0; i < DELAY; i++) {
+		if ((__raw_readl(ether->reg + REG_MIIDA) & PHYBUSY) == 0)
+			break;
+	}
+
+	if (i == DELAY) {
+		dev_warn(&pdev->dev, "mdio read timed out\n");
+		data = 0xffff;
+	} else {
+		data = __raw_readl(ether->reg + REG_MIID);
+	}
+
+	return data;
+}
+
+static int set_mac_address(struct net_device *dev, void *addr)
+{
+	struct sockaddr *address = addr;
+
+	if (!is_valid_ether_addr(address->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
+	w90p910_write_cam(dev, CAM0, dev->dev_addr);
+
+	return 0;
+}
+
+static int w90p910_ether_close(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+
+	dma_free_writecombine(NULL, sizeof(struct w90p910_rxbd),
+				ether->rdesc, (dma_addr_t)ether->rdesc_phys);
+	dma_free_writecombine(NULL, sizeof(struct w90p910_txbd),
+				ether->tdesc, (dma_addr_t)ether->tdesc_phys);
+
+	netif_stop_queue(dev);
+
+	del_timer_sync(&ether->check_timer);
+	clk_disable(ether->rmiiclk);
+	clk_disable(ether->clk);
+
+	free_irq(ether->txirq, dev);
+	free_irq(ether->rxirq, dev);
+
+	return 0;
+}
+
+static struct net_device_stats *w90p910_ether_stats(struct net_device *dev)
+{
+	struct w90p910_ether *ether;
+
+	ether = netdev_priv(dev);
+
+	return &ether->stats;
+}
+
+static int w90p910_send_frame(struct net_device *dev,
+					unsigned char *data, int length)
+{
+	struct w90p910_ether *ether;
+	struct w90p910_txbd *txbd;
+	struct platform_device *pdev;
+	unsigned char *buffer;
+
+	ether = netdev_priv(dev);
+	pdev = ether->pdev;
+
+	txbd = &ether->tdesc->desclist[ether->cur_tx];
+	buffer = ether->tdesc->tran_buf[ether->cur_tx];
+	if (length > 1514) {
+		dev_err(&pdev->dev, "send data %d bytes, check it\n", length);
+		length = 1514;
+	}
+
+	txbd->sl = length & 0xFFFF;
+
+	memcpy(buffer, data, length);
+
+	txbd->mode = TX_OWEN_DMA | PADDINGMODE | CRCMODE | MACTXINTEN;
+
+	w90p910_enable_tx(dev, 1);
+
+	w90p910_trigger_tx(dev);
+
+	ether->cur_tx = (ether->cur_tx+1) % TX_DESC_SIZE;
+	txbd = &ether->tdesc->desclist[ether->cur_tx];
+
+	dev->trans_start = jiffies;
+
+	if (txbd->mode & TX_OWEN_DMA)
+		netif_stop_queue(dev);
+
+	return 0;
+}
+
+static int w90p910_ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+
+	if (!(w90p910_send_frame(dev, skb->data, skb->len))) {
+		ether->skb = skb;
+		dev_kfree_skb_irq(skb);
+		return 0;
+	}
+	return -1;
+}
+
+static irqreturn_t w90p910_tx_interrupt(int irq, void *dev_id)
+{
+	struct w90p910_ether *ether;
+	struct w90p910_txbd  *txbd;
+	struct platform_device *pdev;
+	struct tran_pdesc *tran_pdesc;
+	struct net_device *dev;
+	unsigned int cur_entry, entry, status;
+
+	dev = (struct net_device *)dev_id;
+	ether = netdev_priv(dev);
+	pdev = ether->pdev;
+
+	spin_lock(&ether->lock);
+
+	w90p910_get_and_clear_int(dev, &status);
+
+	cur_entry = __raw_readl(ether->reg + REG_CTXDSA);
+
+	tran_pdesc = ether->tdesc_phys;
+	entry = (unsigned int)(&tran_pdesc->desclist[ether->finish_tx]);
+
+	while (entry != cur_entry) {
+		txbd = &ether->tdesc->desclist[ether->finish_tx];
+
+		ether->finish_tx = (ether->finish_tx + 1) % TX_DESC_SIZE;
+
+		if (txbd->sl & TXDS_TXCP) {
+			ether->stats.tx_packets++;
+			ether->stats.tx_bytes += txbd->sl & 0xFFFF;
+		} else {
+			ether->stats.tx_errors++;
+		}
+
+		txbd->sl = 0x0;
+		txbd->mode = 0x0;
+
+		if (netif_queue_stopped(dev))
+			netif_wake_queue(dev);
+
+		entry = (unsigned int)(&tran_pdesc->desclist[ether->finish_tx]);
+	}
+
+	if (status & MISTA_EXDEF) {
+		dev_err(&pdev->dev, "emc defer exceed interrupt\n");
+	} else if (status & MISTA_TXBERR) {
+			dev_err(&pdev->dev, "emc bus error interrupt\n");
+			w90p910_reset_mac(dev);
+		} else if (status & MISTA_TDU) {
+				if (netif_queue_stopped(dev))
+					netif_wake_queue(dev);
+			}
+
+	spin_unlock(&ether->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void netdev_rx(struct net_device *dev)
+{
+	struct w90p910_ether *ether;
+	struct w90p910_rxbd *rxbd;
+	struct platform_device *pdev;
+	struct recv_pdesc *rdesc_phys;
+	struct sk_buff *skb;
+	unsigned char *data;
+	unsigned int length, status, val, entry;
+
+	ether = netdev_priv(dev);
+	pdev = ether->pdev;
+	rdesc_phys = ether->rdesc_phys;
+
+	rxbd = &ether->rdesc->desclist[ether->cur_rx];
+
+	do {
+		val = __raw_readl(ether->reg + REG_CRXDSA);
+		entry = (unsigned int)&rdesc_phys->desclist[ether->cur_rx];
+
+		if (val == entry)
+			break;
+
+		status = rxbd->sl;
+		length = status & 0xFFFF;
+
+		if (status & RXDS_RXGD) {
+			data = ether->rdesc->recv_buf[ether->cur_rx];
+			skb = dev_alloc_skb(length+2);
+			if (!skb) {
+				dev_err(&pdev->dev, "get skb buffer error\n");
+				ether->stats.rx_dropped++;
+				return;
+			}
+
+			skb->dev = dev;
+			skb_reserve(skb, 2);
+			skb_put(skb, length);
+			skb_copy_to_linear_data(skb, data, length);
+			skb->protocol = eth_type_trans(skb, dev);
+			ether->stats.rx_packets++;
+			ether->stats.rx_bytes += length;
+			netif_rx(skb);
+		} else {
+			ether->stats.rx_errors++;
+
+			if (status & RXDS_RP) {
+				dev_err(&pdev->dev, "rx runt err\n");
+				ether->stats.rx_length_errors++;
+			} else if (status & RXDS_CRCE) {
+					dev_err(&pdev->dev, "rx crc err\n");
+					ether->stats.rx_crc_errors++;
+				}
+
+			if (status & RXDS_ALIE) {
+				dev_err(&pdev->dev, "rx aligment err\n");
+				ether->stats.rx_frame_errors++;
+			} else if (status & RXDS_PTLE) {
+					dev_err(&pdev->dev, "rx longer err\n");
+					ether->stats.rx_over_errors++;
+				}
+			}
+
+		rxbd->sl = RX_OWEN_DMA;
+		rxbd->reserved = 0x0;
+		ether->cur_rx = (ether->cur_rx+1) % RX_DESC_SIZE;
+		rxbd = &ether->rdesc->desclist[ether->cur_rx];
+
+		dev->last_rx = jiffies;
+	} while (1);
+}
+
+static irqreturn_t w90p910_rx_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev;
+	struct w90p910_ether  *ether;
+	struct platform_device *pdev;
+	unsigned int status;
+
+	dev = (struct net_device *)dev_id;
+	ether = netdev_priv(dev);
+	pdev = ether->pdev;
+
+	spin_lock(&ether->lock);
+
+	w90p910_get_and_clear_int(dev, &status);
+
+	if (status & MISTA_RDU) {
+		netdev_rx(dev);
+
+		w90p910_trigger_rx(dev);
+
+		spin_unlock(&ether->lock);
+		return IRQ_HANDLED;
+	} else if (status & MISTA_RXBERR) {
+			dev_err(&pdev->dev, "emc rx bus error\n");
+			w90p910_reset_mac(dev);
+		}
+
+	netdev_rx(dev);
+	spin_unlock(&ether->lock);
+	return IRQ_HANDLED;
+}
+
+static int w90p910_ether_open(struct net_device *dev)
+{
+	struct w90p910_ether *ether;
+	struct platform_device *pdev;
+
+	ether = netdev_priv(dev);
+	pdev = ether->pdev;
+
+	w90p910_reset_mac(dev);
+	w90p910_set_fifo_threshold(dev);
+	w90p910_set_curdest(dev);
+	w90p910_enable_cam(dev);
+	w90p910_enable_cam_command(dev);
+	w90p910_enable_mac_interrupt(dev);
+	w90p910_set_global_maccmd(dev);
+	w90p910_enable_rx(dev, 1);
+
+	ether->rx_packets = 0x0;
+	ether->rx_bytes = 0x0;
+
+	if (request_irq(ether->txirq, w90p910_tx_interrupt,
+						0x0, pdev->name, dev)) {
+		dev_err(&pdev->dev, "register irq tx failed\n");
+		return -EAGAIN;
+	}
+
+	if (request_irq(ether->rxirq, w90p910_rx_interrupt,
+						0x0, pdev->name, dev)) {
+		dev_err(&pdev->dev, "register irq rx failed\n");
+		return -EAGAIN;
+	}
+
+	mod_timer(&ether->check_timer, jiffies + msecs_to_jiffies(1000));
+	netif_start_queue(dev);
+	w90p910_trigger_rx(dev);
+
+	dev_info(&pdev->dev, "%s is OPENED\n", dev->name);
+
+	return 0;
+}
+
+static void w90p910_ether_set_multicast_list(struct net_device *dev)
+{
+	struct w90p910_ether *ether;
+	unsigned int rx_mode;
+
+	ether = netdev_priv(dev);
+
+	if (dev->flags & IFF_PROMISC)
+		rx_mode = CAMCMR_AUP | CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
+	else if ((dev->flags & IFF_ALLMULTI) || dev->mc_list)
+			rx_mode = CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
+		else
+				rx_mode = CAMCMR_ECMP | CAMCMR_ABP;
+	__raw_writel(rx_mode, ether->reg + REG_CAMCMR);
+}
+
+static int w90p910_ether_ioctl(struct net_device *dev,
+						struct ifreq *ifr, int cmd)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	struct mii_ioctl_data *data = if_mii(ifr);
+
+	return generic_mii_ioctl(&ether->mii, data, cmd, NULL);
+}
+
+static void w90p910_get_drvinfo(struct net_device *dev,
+					struct ethtool_drvinfo *info)
+{
+	strcpy(info->driver, DRV_MODULE_NAME);
+	strcpy(info->version, DRV_MODULE_VERSION);
+}
+
+static int w90p910_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	return mii_ethtool_gset(&ether->mii, cmd);
+}
+
+static int w90p910_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	return mii_ethtool_sset(&ether->mii, cmd);
+}
+
+static int w90p910_nway_reset(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	return mii_nway_restart(&ether->mii);
+}
+
+static u32 w90p910_get_link(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	return mii_link_ok(&ether->mii);
+}
+
+static const struct ethtool_ops w90p910_ether_ethtool_ops = {
+	.get_settings	= w90p910_get_settings,
+	.set_settings	= w90p910_set_settings,
+	.get_drvinfo	= w90p910_get_drvinfo,
+	.nway_reset	= w90p910_nway_reset,
+	.get_link	= w90p910_get_link,
+};
+
+static const struct net_device_ops w90p910_ether_netdev_ops = {
+	.ndo_open		= w90p910_ether_open,
+	.ndo_stop		= w90p910_ether_close,
+	.ndo_start_xmit		= w90p910_ether_start_xmit,
+	.ndo_get_stats		= w90p910_ether_stats,
+	.ndo_set_multicast_list	= w90p910_ether_set_multicast_list,
+	.ndo_set_mac_address	= set_mac_address,
+	.ndo_do_ioctl		= w90p910_ether_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
+static void __init get_mac_address(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+	struct platform_device *pdev;
+	char addr[6];
+
+	pdev = ether->pdev;
+
+	addr[0] = 0x00;
+	addr[1] = 0x02;
+	addr[2] = 0xac;
+	addr[3] = 0x55;
+	addr[4] = 0x88;
+	addr[5] = 0xa8;
+
+	if (is_valid_ether_addr(addr))
+		memcpy(dev->dev_addr, &addr, 0x06);
+	else
+		dev_err(&pdev->dev, "invalid mac address\n");
+}
+
+static int w90p910_ether_setup(struct net_device *dev)
+{
+	struct w90p910_ether *ether = netdev_priv(dev);
+
+	ether_setup(dev);
+	dev->netdev_ops = &w90p910_ether_netdev_ops;
+	dev->ethtool_ops = &w90p910_ether_ethtool_ops;
+
+	dev->tx_queue_len = 16;
+	dev->dma = 0x0;
+	dev->watchdog_timeo = TX_TIMEOUT;
+
+	get_mac_address(dev);
+
+	spin_lock_init(&ether->lock);
+
+	ether->cur_tx = 0x0;
+	ether->cur_rx = 0x0;
+	ether->finish_tx = 0x0;
+	ether->linkflag = 0x0;
+	ether->mii.phy_id = 0x01;
+	ether->mii.phy_id_mask = 0x1f;
+	ether->mii.reg_num_mask = 0x1f;
+	ether->mii.dev = dev;
+	ether->mii.mdio_read = w90p910_mdio_read;
+	ether->mii.mdio_write = w90p910_mdio_write;
+
+	setup_timer(&ether->check_timer, w90p910_check_link,
+						(unsigned long)dev);
+
+	return 0;
+}
+
+static int __devinit w90p910_ether_probe(struct platform_device *pdev)
+{
+	struct w90p910_ether *ether;
+	struct net_device *dev;
+	struct resource *res;
+	int error;
+
+	dev = alloc_etherdev(sizeof(struct w90p910_ether));
+	if (!dev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to get I/O memory\n");
+		error = -ENXIO;
+		goto failed_free;
+	}
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to request I/O memory\n");
+		error = -EBUSY;
+		goto failed_free;
+	}
+
+	ether = netdev_priv(dev);
+
+	ether->reg = ioremap(res->start, resource_size(res));
+	if (ether->reg == NULL) {
+		dev_err(&pdev->dev, "failed to remap I/O memory\n");
+		error = -ENXIO;
+		goto failed_free_mem;
+	}
+
+	ether->txirq = platform_get_irq(pdev, 0);
+	if (ether->txirq < 0) {
+		dev_err(&pdev->dev, "failed to get ether tx irq\n");
+		error = -ENXIO;
+		goto failed_free_io;
+	}
+
+	ether->rxirq = platform_get_irq(pdev, 1);
+	if (ether->rxirq < 0) {
+		dev_err(&pdev->dev, "failed to get ether rx irq\n");
+		error = -ENXIO;
+		goto failed_free_txirq;
+	}
+
+	platform_set_drvdata(pdev, dev);
+
+	ether->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ether->clk)) {
+		dev_err(&pdev->dev, "failed to get ether clock\n");
+		error = PTR_ERR(ether->clk);
+		goto failed_free_rxirq;
+	}
+
+	ether->rmiiclk = clk_get(&pdev->dev, "RMII");
+	if (IS_ERR(ether->rmiiclk)) {
+		dev_err(&pdev->dev, "failed to get ether clock\n");
+		error = PTR_ERR(ether->rmiiclk);
+		goto failed_put_clk;
+	}
+
+	ether->pdev = pdev;
+
+	w90p910_ether_setup(dev);
+
+	error = register_netdev(dev);
+	if (error != 0) {
+		dev_err(&pdev->dev, "Regiter EMC w90p910 FAILED\n");
+		error = -ENODEV;
+		goto failed_put_rmiiclk;
+	}
+
+	return 0;
+failed_put_rmiiclk:
+	clk_put(ether->rmiiclk);
+failed_put_clk:
+	clk_put(ether->clk);
+failed_free_rxirq:
+	free_irq(ether->rxirq, pdev);
+	platform_set_drvdata(pdev, NULL);
+failed_free_txirq:
+	free_irq(ether->txirq, pdev);
+failed_free_io:
+	iounmap(ether->reg);
+failed_free_mem:
+	release_mem_region(res->start, resource_size(res));
+failed_free:
+	free_netdev(dev);
+	return error;
+}
+
+static int __devexit w90p910_ether_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct w90p910_ether *ether = netdev_priv(dev);
+
+	unregister_netdev(dev);
+	clk_put(ether->rmiiclk);
+	clk_put(ether->clk);
+	del_timer_sync(&ether->check_timer);
+	platform_set_drvdata(pdev, NULL);
+	free_netdev(dev);
+	return 0;
+}
+
+static struct platform_driver w90p910_ether_driver = {
+	.probe		= w90p910_ether_probe,
+	.remove		= __devexit_p(w90p910_ether_remove),
+	.driver		= {
+		.name	= "nuc900-emc",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init w90p910_ether_init(void)
+{
+	return platform_driver_register(&w90p910_ether_driver);
+}
+
+static void __exit w90p910_ether_exit(void)
+{
+	platform_driver_unregister(&w90p910_ether_driver);
+}
+
+module_init(w90p910_ether_init);
+module_exit(w90p910_ether_exit);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("w90p910 MAC driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nuc900-emc");
+
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
index 18b566ad4fd..cf30e278f18 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/at1700.c
@@ -318,7 +318,7 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr)
 				pos3 = mca_read_stored_pos( slot, 3 );
 				pos4 = mca_read_stored_pos( slot, 4 );
 
-				for (l_i = 0; l_i < 0x09; l_i++)
+				for (l_i = 0; l_i < 8; l_i++)
 					if (( pos3 & 0x07) == at1700_ioaddr_pattern[l_i])
 						break;
 				ioaddr = at1700_mca_probe_list[l_i];
diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/atl1c/atl1c.h
index e1658ef3fcd..2a1120ad2e7 100644
--- a/drivers/net/atl1c/atl1c.h
+++ b/drivers/net/atl1c/atl1c.h
@@ -188,14 +188,14 @@ struct atl1c_tpd_ext_desc {
 #define RRS_HDS_TYPE_DATA	2
 
 #define RRS_IS_NO_HDS_TYPE(flag) \
-	(((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == 0)
+	((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == 0)
 
 #define RRS_IS_HDS_HEAD(flag) \
-	(((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \
+	((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == \
 			RRS_HDS_TYPE_HEAD)
 
 #define RRS_IS_HDS_DATA(flag) \
-	(((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \
+	((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == \
 			RRS_HDS_TYPE_DATA)
 
 /* rrs word 3 bit 0:31 */
@@ -245,7 +245,7 @@ struct atl1c_tpd_ext_desc {
 #define RRS_PACKET_TYPE_802_3  	1
 #define RRS_PACKET_TYPE_ETH	0
 #define RRS_PACKET_IS_ETH(word) \
-	(((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK == \
+	((((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK) == \
 			RRS_PACKET_TYPE_ETH)
 #define RRS_RXD_IS_VALID(word) \
 	((((word) >> RRS_RXD_UPDATED_SHIFT) & RRS_RXD_UPDATED_MASK) == 1)
diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c
index e4afbd628c2..00d11b480af 100644
--- a/drivers/net/atl1c/atl1c_ethtool.c
+++ b/drivers/net/atl1c/atl1c_ethtool.c
@@ -232,11 +232,11 @@ static void atl1c_get_drvinfo(struct net_device *netdev,
 {
 	struct atl1c_adapter *adapter = netdev_priv(netdev);
 
-	strncpy(drvinfo->driver,  atl1c_driver_name, sizeof(drvinfo->driver));
-	strncpy(drvinfo->version, atl1c_driver_version,
+	strlcpy(drvinfo->driver,  atl1c_driver_name, sizeof(drvinfo->driver));
+	strlcpy(drvinfo->version, atl1c_driver_version,
 		sizeof(drvinfo->version));
-	strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
-	strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+	strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
+	strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
 		sizeof(drvinfo->bus_info));
 	drvinfo->n_stats = 0;
 	drvinfo->testinfo_len = 0;
@@ -281,6 +281,8 @@ static int atl1c_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & WAKE_PHY)
 		adapter->wol |= AT_WUFC_LNKC;
 
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
 	return 0;
 }
 
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index cd547a205fb..a383122679d 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -1689,7 +1689,7 @@ static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, u8 que,
 		if (likely(RRS_RXD_IS_VALID(rrs->word3))) {
 			rfd_num = (rrs->word0 >> RRS_RX_RFD_CNT_SHIFT) &
 				RRS_RX_RFD_CNT_MASK;
-			if (unlikely(rfd_num) != 1)
+			if (unlikely(rfd_num != 1))
 				/* TODO support mul rfd*/
 				if (netif_msg_rx_err(adapter))
 					dev_warn(&pdev->dev,
diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c
index 619c6583e1a..4003955d7a9 100644
--- a/drivers/net/atl1e/atl1e_ethtool.c
+++ b/drivers/net/atl1e/atl1e_ethtool.c
@@ -365,6 +365,8 @@ static int atl1e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & WAKE_PHY)
 		adapter->wol |= AT_WUFC_LNKC;
 
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
 	return 0;
 }
 
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 94d7325caf4..8bca12f7139 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -3378,11 +3378,11 @@ static void atl1_get_drvinfo(struct net_device *netdev,
 {
 	struct atl1_adapter *adapter = netdev_priv(netdev);
 
-	strncpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver));
-	strncpy(drvinfo->version, ATLX_DRIVER_VERSION,
+	strlcpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver));
+	strlcpy(drvinfo->version, ATLX_DRIVER_VERSION,
 		sizeof(drvinfo->version));
-	strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
-	strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+	strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
+	strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
 		sizeof(drvinfo->bus_info));
 	drvinfo->eedump_len = ATL1_EEDUMP_LEN;
 }
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index c734b1983ec..204db961029 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -2071,7 +2071,7 @@ static int atl2_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
 		return -EOPNOTSUPP;
 
-	if (wol->wolopts & (WAKE_MCAST|WAKE_BCAST|WAKE_MCAST))
+	if (wol->wolopts & (WAKE_UCAST | WAKE_BCAST | WAKE_MCAST))
 		return -EOPNOTSUPP;
 
 	/* these settings will always override what we currently have */
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 36d4d377ec2..bafca672ea7 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -952,9 +952,10 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int rc = NETDEV_TX_OK;
 	dma_addr_t mapping;
 	u32 len, entry, ctrl;
+	unsigned long flags;
 
 	len = skb->len;
-	spin_lock_irq(&bp->lock);
+	spin_lock_irqsave(&bp->lock, flags);
 
 	/* This is a hard error, log it. */
 	if (unlikely(TX_BUFFS_AVAIL(bp) < 1)) {
@@ -1027,7 +1028,7 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	dev->trans_start = jiffies;
 
 out_unlock:
-	spin_unlock_irq(&bp->lock);
+	spin_unlock_irqrestore(&bp->lock, flags);
 
 	return rc;
 
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index f703758f0a6..5b4bf3d2cdc 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -73,7 +73,7 @@ static inline char *nic_name(struct pci_dev *pdev)
 #define RX_FRAGS_REFILL_WM	(RX_Q_LEN - MAX_RX_POST)
 
 #define BE_MAX_LRO_DESCRIPTORS  16
-#define BE_MAX_FRAGS_PER_FRAME  16
+#define BE_MAX_FRAGS_PER_FRAME  (min((u32) 16, (u32) MAX_SKB_FRAGS))
 
 struct be_dma_mem {
 	void *va;
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 9592f22e4c8..cccc5419ad7 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -162,8 +162,8 @@ be_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
 		return -EINVAL;
 
 	adapter->max_rx_coal = coalesce->rx_max_coalesced_frames;
-	if (adapter->max_rx_coal > MAX_SKB_FRAGS)
-		adapter->max_rx_coal = MAX_SKB_FRAGS - 1;
+	if (adapter->max_rx_coal > BE_MAX_FRAGS_PER_FRAME)
+		adapter->max_rx_coal = BE_MAX_FRAGS_PER_FRAME;
 
 	/* if AIC is being turned on now, start with an EQD of 0 */
 	if (rx_eq->enable_aic == 0 &&
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index b02e805c1db..29c33c709c6 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -55,6 +55,10 @@
 #define MEMBAR_CTRL_INT_CTRL_PFUNC_MASK  	0x7 	/* bits 26 - 28 */
 #define MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT	26
 
+/********* ISR0 Register offset **********/
+#define CEV_ISR0_OFFSET 			0xC18
+#define CEV_ISR_SIZE				4
+
 /********* Event Q door bell *************/
 #define DB_EQ_OFFSET			DB_CQ_OFFSET
 #define DB_EQ_RING_ID_MASK		0x1FF	/* bits 0 - 8 */
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 66c10c87f51..dea3155688b 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -666,8 +666,8 @@ static void skb_fill_rx_data(struct be_adapter *adapter,
 {
 	struct be_queue_info *rxq = &adapter->rx_obj.q;
 	struct be_rx_page_info *page_info;
-	u16 rxq_idx, i, num_rcvd;
-	u32 pktsize, hdr_len, curr_frag_len;
+	u16 rxq_idx, i, num_rcvd, j;
+	u32 pktsize, hdr_len, curr_frag_len, size;
 	u8 *start;
 
 	rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
@@ -708,23 +708,34 @@ static void skb_fill_rx_data(struct be_adapter *adapter,
 	}
 
 	/* More frags present for this completion */
-	pktsize -= curr_frag_len; /* account for above copied frag */
-	for (i = 1; i < num_rcvd; i++) {
+	size = pktsize;
+	for (i = 1, j = 0; i < num_rcvd; i++) {
+		size -= curr_frag_len;
 		index_inc(&rxq_idx, rxq->len);
 		page_info = get_rx_page_info(adapter, rxq_idx);
 
-		curr_frag_len = min(pktsize, rx_frag_size);
+		curr_frag_len = min(size, rx_frag_size);
+
+		/* Coalesce all frags from the same physical page in one slot */
+		if (page_info->page_offset == 0) {
+			/* Fresh page */
+			j++;
+			skb_shinfo(skb)->frags[j].page = page_info->page;
+			skb_shinfo(skb)->frags[j].page_offset =
+							page_info->page_offset;
+			skb_shinfo(skb)->frags[j].size = 0;
+			skb_shinfo(skb)->nr_frags++;
+		} else {
+			put_page(page_info->page);
+		}
 
-		skb_shinfo(skb)->frags[i].page = page_info->page;
-		skb_shinfo(skb)->frags[i].page_offset = page_info->page_offset;
-		skb_shinfo(skb)->frags[i].size = curr_frag_len;
+		skb_shinfo(skb)->frags[j].size += curr_frag_len;
 		skb->len += curr_frag_len;
 		skb->data_len += curr_frag_len;
-		skb_shinfo(skb)->nr_frags++;
-		pktsize -= curr_frag_len;
 
 		memset(page_info, 0, sizeof(*page_info));
 	}
+	BUG_ON(j > MAX_SKB_FRAGS);
 
 done:
 	be_rx_stats_update(adapter, pktsize, num_rcvd);
@@ -786,7 +797,7 @@ static void be_rx_compl_process_lro(struct be_adapter *adapter,
 	struct skb_frag_struct rx_frags[BE_MAX_FRAGS_PER_FRAME];
 	struct be_queue_info *rxq = &adapter->rx_obj.q;
 	u32 num_rcvd, pkt_size, remaining, vlanf, curr_frag_len;
-	u16 i, rxq_idx = 0, vid;
+	u16 i, rxq_idx = 0, vid, j;
 
 	num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
 	pkt_size = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
@@ -794,20 +805,28 @@ static void be_rx_compl_process_lro(struct be_adapter *adapter,
 	rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
 
 	remaining = pkt_size;
-	for (i = 0; i < num_rcvd; i++) {
+	for (i = 0, j = -1; i < num_rcvd; i++) {
 		page_info = get_rx_page_info(adapter, rxq_idx);
 
 		curr_frag_len = min(remaining, rx_frag_size);
 
-		rx_frags[i].page = page_info->page;
-		rx_frags[i].page_offset = page_info->page_offset;
-		rx_frags[i].size = curr_frag_len;
-		remaining -= curr_frag_len;
+		/* Coalesce all frags from the same physical page in one slot */
+		if (i == 0 || page_info->page_offset == 0) {
+			/* First frag or Fresh page */
+			j++;
+			rx_frags[j].page = page_info->page;
+			rx_frags[j].page_offset = page_info->page_offset;
+			rx_frags[j].size = 0;
+		} else {
+			put_page(page_info->page);
+		}
+		rx_frags[j].size += curr_frag_len;
 
+		remaining -= curr_frag_len;
 		index_inc(&rxq_idx, rxq->len);
-
 		memset(page_info, 0, sizeof(*page_info));
 	}
+	BUG_ON(j > MAX_SKB_FRAGS);
 
 	if (likely(!vlanf)) {
 		lro_receive_frags(&adapter->rx_obj.lro_mgr, rx_frags, pkt_size,
@@ -1255,15 +1274,17 @@ static irqreturn_t be_intx(int irq, void *dev)
 {
 	struct be_adapter *adapter = dev;
 	struct be_ctrl_info *ctrl = &adapter->ctrl;
-	int rx, tx;
+        int isr;
 
-	tx = event_handle(ctrl, &adapter->tx_eq);
-	rx = event_handle(ctrl, &adapter->rx_eq);
+	isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET +
+                      ctrl->pci_func * CEV_ISR_SIZE);
+	if (!isr)
+                return IRQ_NONE;
 
-	if (rx || tx)
-		return IRQ_HANDLED;
-	else
-		return IRQ_NONE;
+        event_handle(ctrl, &adapter->tx_eq);
+        event_handle(ctrl, &adapter->rx_eq);
+
+        return IRQ_HANDLED;
 }
 
 static irqreturn_t be_msix_rx(int irq, void *dev)
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 9578a3dfac0..206144f2470 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -428,10 +428,11 @@ bmac_init_phy(struct net_device *dev)
 	printk(KERN_DEBUG "phy registers:");
 	for (addr = 0; addr < 32; ++addr) {
 		if ((addr & 7) == 0)
-			printk("\n" KERN_DEBUG);
-		printk(" %.4x", bmac_mif_read(dev, addr));
+			printk(KERN_DEBUG);
+		printk(KERN_CONT " %.4x", bmac_mif_read(dev, addr));
 	}
-	printk("\n");
+	printk(KERN_CONT "\n");
+
 	if (bp->is_bmac_plus) {
 		unsigned int capable, ctrl;
 
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index b70cc99962f..06b901152d4 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -399,9 +399,11 @@ static int bnx2_unregister_cnic(struct net_device *dev)
 	struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
 	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
 
+	mutex_lock(&bp->cnic_lock);
 	cp->drv_state = 0;
 	bnapi->cnic_present = 0;
 	rcu_assign_pointer(bp->cnic_ops, NULL);
+	mutex_unlock(&bp->cnic_lock);
 	synchronize_rcu();
 	return 0;
 }
@@ -429,13 +431,13 @@ bnx2_cnic_stop(struct bnx2 *bp)
 	struct cnic_ops *c_ops;
 	struct cnic_ctl_info info;
 
-	rcu_read_lock();
-	c_ops = rcu_dereference(bp->cnic_ops);
+	mutex_lock(&bp->cnic_lock);
+	c_ops = bp->cnic_ops;
 	if (c_ops) {
 		info.cmd = CNIC_CTL_STOP_CMD;
 		c_ops->cnic_ctl(bp->cnic_data, &info);
 	}
-	rcu_read_unlock();
+	mutex_unlock(&bp->cnic_lock);
 }
 
 static void
@@ -444,8 +446,8 @@ bnx2_cnic_start(struct bnx2 *bp)
 	struct cnic_ops *c_ops;
 	struct cnic_ctl_info info;
 
-	rcu_read_lock();
-	c_ops = rcu_dereference(bp->cnic_ops);
+	mutex_lock(&bp->cnic_lock);
+	c_ops = bp->cnic_ops;
 	if (c_ops) {
 		if (!(bp->flags & BNX2_FLAG_USING_MSIX)) {
 			struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
@@ -455,7 +457,7 @@ bnx2_cnic_start(struct bnx2 *bp)
 		info.cmd = CNIC_CTL_START_CMD;
 		c_ops->cnic_ctl(bp->cnic_data, &info);
 	}
-	rcu_read_unlock();
+	mutex_unlock(&bp->cnic_lock);
 }
 
 #else
@@ -7663,6 +7665,9 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 
 	spin_lock_init(&bp->phy_lock);
 	spin_lock_init(&bp->indirect_lock);
+#ifdef BCM_CNIC
+	mutex_init(&bp->cnic_lock);
+#endif
 	INIT_WORK(&bp->reset_task, bnx2_reset_task);
 
 	dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0);
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index f1edfaa9e56..a4f12fd0ecd 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6902,6 +6902,7 @@ struct bnx2 {
 	u32			idle_chk_status_idx;
 
 #ifdef BCM_CNIC
+	struct mutex		cnic_lock;
 	struct cnic_eth_dev	cnic_eth_dev;
 #endif
 
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 8678457849f..85a737c5c23 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -902,6 +902,8 @@ struct bnx2x {
 	u16			rx_quick_cons_trip;
 	u16			rx_ticks_int;
 	u16			rx_ticks;
+/* Maximal coalescing timeout in us */
+#define BNX2X_MAX_COALESCE_TOUT		(0xf0*12)
 
 	u32			lin_cnt;
 
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index ed648acef7c..2ee581a2cde 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -4212,13 +4212,14 @@ static void bnx2x_turn_off_sf(struct bnx2x *bp, u8 port)
 u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
 			      u8 *version, u16 len)
 {
-	struct bnx2x *bp = params->bp;
+	struct bnx2x *bp;
 	u32 ext_phy_type = 0;
 	u32 spirom_ver = 0;
 	u8 status = 0 ;
 
 	if (version == NULL || params == NULL)
 		return -EINVAL;
+	bp = params->bp;
 
 	spirom_ver = REG_RD(bp, params->shmem_base +
 		   offsetof(struct shmem_region,
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index fbf1352e9c1..c36a5f33739 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -484,8 +484,9 @@ static void bnx2x_fw_dump(struct bnx2x *bp)
 
 	mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104);
 	mark = ((mark + 0x3) & ~0x3);
-	printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n" KERN_ERR, mark);
+	printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark);
 
+	printk(KERN_ERR PFX);
 	for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) {
 		for (word = 0; word < 8; word++)
 			data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
@@ -500,7 +501,7 @@ static void bnx2x_fw_dump(struct bnx2x *bp)
 		data[8] = 0x0;
 		printk(KERN_CONT "%s", (char *)data);
 	}
-	printk("\n" KERN_ERR PFX "end of fw dump\n");
+	printk(KERN_ERR PFX "end of fw dump\n");
 }
 
 static void bnx2x_panic_dump(struct bnx2x *bp)
@@ -4434,7 +4435,7 @@ static void bnx2x_update_coalesce(struct bnx2x *bp)
 		REG_WR16(bp, BAR_USTRORM_INTMEM +
 			 USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
 						     U_SB_ETH_RX_CQ_INDEX),
-			 bp->rx_ticks ? 0 : 1);
+			 (bp->rx_ticks/12) ? 0 : 1);
 
 		/* HC_INDEX_C_ETH_TX_CQ_CONS */
 		REG_WR8(bp, BAR_CSTRORM_INTMEM +
@@ -4444,7 +4445,7 @@ static void bnx2x_update_coalesce(struct bnx2x *bp)
 		REG_WR16(bp, BAR_CSTRORM_INTMEM +
 			 CSTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
 						     C_SB_ETH_TX_CQ_INDEX),
-			 bp->tx_ticks ? 0 : 1);
+			 (bp->tx_ticks/12) ? 0 : 1);
 	}
 }
 
@@ -7354,7 +7355,7 @@ static void bnx2x_reset_task(struct work_struct *work)
 #ifdef BNX2X_STOP_ON_ERROR
 	BNX2X_ERR("reset task called but STOP_ON_ERROR defined"
 		  " so reset not done to allow debug dump,\n"
-	 KERN_ERR " you will need to reboot when done\n");
+		  " you will need to reboot when done\n");
 	return;
 #endif
 
@@ -8637,6 +8638,14 @@ static int bnx2x_nway_reset(struct net_device *dev)
 	return 0;
 }
 
+static u32
+bnx2x_get_link(struct net_device *dev)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+
+	return bp->link_vars.link_up;
+}
+
 static int bnx2x_get_eeprom_len(struct net_device *dev)
 {
 	struct bnx2x *bp = netdev_priv(dev);
@@ -9061,12 +9070,12 @@ static int bnx2x_set_coalesce(struct net_device *dev,
 	struct bnx2x *bp = netdev_priv(dev);
 
 	bp->rx_ticks = (u16) coal->rx_coalesce_usecs;
-	if (bp->rx_ticks > 3000)
-		bp->rx_ticks = 3000;
+	if (bp->rx_ticks > BNX2X_MAX_COALESCE_TOUT)
+		bp->rx_ticks = BNX2X_MAX_COALESCE_TOUT;
 
 	bp->tx_ticks = (u16) coal->tx_coalesce_usecs;
-	if (bp->tx_ticks > 0x3000)
-		bp->tx_ticks = 0x3000;
+	if (bp->tx_ticks > BNX2X_MAX_COALESCE_TOUT)
+		bp->tx_ticks = BNX2X_MAX_COALESCE_TOUT;
 
 	if (netif_running(dev))
 		bnx2x_update_coalesce(bp);
@@ -10034,7 +10043,7 @@ static struct ethtool_ops bnx2x_ethtool_ops = {
 	.get_msglevel		= bnx2x_get_msglevel,
 	.set_msglevel		= bnx2x_set_msglevel,
 	.nway_reset		= bnx2x_nway_reset,
-	.get_link		= ethtool_op_get_link,
+	.get_link		= bnx2x_get_link,
 	.get_eeprom_len		= bnx2x_get_eeprom_len,
 	.get_eeprom		= bnx2x_get_eeprom,
 	.set_eeprom		= bnx2x_set_eeprom,
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index d927f71af8a..aa1be1fecee 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1459,8 +1459,16 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	 * ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
 	 */
 	if (bond->slave_cnt == 0) {
-		if (slave_dev->type != ARPHRD_ETHER)
-			bond_setup_by_slave(bond_dev, slave_dev);
+		if (bond_dev->type != slave_dev->type) {
+			dev_close(bond_dev);
+			pr_debug("%s: change device type from %d to %d\n",
+				bond_dev->name, bond_dev->type, slave_dev->type);
+			if (slave_dev->type != ARPHRD_ETHER)
+				bond_setup_by_slave(bond_dev, slave_dev);
+			else
+				ether_setup(bond_dev);
+			dev_open(bond_dev);
+		}
 	} else if (bond_dev->type != slave_dev->type) {
 		pr_err(DRV_NAME ": %s ether type (%d) is different "
 			"from other slaves (%d), can not enslave it.\n",
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 574daddc21b..e1a4f821423 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -346,7 +346,7 @@ void can_restart(unsigned long data)
 	skb = dev_alloc_skb(sizeof(struct can_frame));
 	if (skb == NULL) {
 		err = -ENOMEM;
-		goto out;
+		goto restart;
 	}
 	skb->dev = dev;
 	skb->protocol = htons(ETH_P_CAN);
@@ -361,13 +361,13 @@ void can_restart(unsigned long data)
 	stats->rx_packets++;
 	stats->rx_bytes += cf->can_dlc;
 
+restart:
 	dev_dbg(dev->dev.parent, "restarted\n");
 	priv->can_stats.restarts++;
 
 	/* Now restart the device */
 	err = priv->do_set_mode(dev, CAN_MODE_START);
 
-out:
 	netif_carrier_on(dev);
 	if (err)
 		dev_err(dev->dev.parent, "Error %d during restart", err);
@@ -473,6 +473,10 @@ int open_candev(struct net_device *dev)
 		return -EINVAL;
 	}
 
+	/* Switch carrier on if device was stopped while in bus-off state */
+	if (!netif_carrier_ok(dev))
+		netif_carrier_on(dev);
+
 	setup_timer(&priv->restart_timer, can_restart, (unsigned long)dev);
 
 	return 0;
@@ -607,11 +611,18 @@ nla_put_failure:
 	return -EMSGSIZE;
 }
 
+static int can_newlink(struct net_device *dev,
+		       struct nlattr *tb[], struct nlattr *data[])
+{
+	return -EOPNOTSUPP;
+}
+
 static struct rtnl_link_ops can_link_ops __read_mostly = {
 	.kind		= "can",
 	.maxtype	= IFLA_CAN_MAX,
 	.policy		= can_policy,
 	.setup		= can_setup,
+	.newlink	= can_newlink,
 	.changelink	= can_changelink,
 	.fill_info	= can_fill_info,
 	.fill_xstats	= can_fill_xstats,
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 571f133a8fe..08ebee79d8a 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -63,7 +63,6 @@
 #include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
-#include <linux/can/dev.h>
 
 #include "sja1000.h"
 
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 4d1515f45ba..74c342959b7 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -138,6 +138,16 @@ static struct cnic_dev *cnic_from_netdev(struct net_device *netdev)
 	return NULL;
 }
 
+static inline void ulp_get(struct cnic_ulp_ops *ulp_ops)
+{
+	atomic_inc(&ulp_ops->ref_count);
+}
+
+static inline void ulp_put(struct cnic_ulp_ops *ulp_ops)
+{
+	atomic_dec(&ulp_ops->ref_count);
+}
+
 static void cnic_ctx_wr(struct cnic_dev *dev, u32 cid_addr, u32 off, u32 val)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -227,7 +237,7 @@ static int cnic_send_nlmsg(struct cnic_local *cp, u32 type,
 	}
 
 	rcu_read_lock();
-	ulp_ops = rcu_dereference(cp->ulp_ops[CNIC_ULP_ISCSI]);
+	ulp_ops = rcu_dereference(cnic_ulp_tbl[CNIC_ULP_ISCSI]);
 	if (ulp_ops)
 		ulp_ops->iscsi_nl_send_msg(cp->dev, msg_type, buf, len);
 	rcu_read_unlock();
@@ -319,6 +329,20 @@ static int cnic_abort_prep(struct cnic_sock *csk)
 	return 0;
 }
 
+static void cnic_uio_stop(void)
+{
+	struct cnic_dev *dev;
+
+	read_lock(&cnic_dev_lock);
+	list_for_each_entry(dev, &cnic_dev_list, list) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		if (cp->cnic_uinfo)
+			cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+	}
+	read_unlock(&cnic_dev_lock);
+}
+
 int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
 {
 	struct cnic_dev *dev;
@@ -344,6 +368,7 @@ int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
 	}
 	read_unlock(&cnic_dev_lock);
 
+	atomic_set(&ulp_ops->ref_count, 0);
 	rcu_assign_pointer(cnic_ulp_tbl[ulp_type], ulp_ops);
 	mutex_unlock(&cnic_lock);
 
@@ -365,6 +390,8 @@ int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
 int cnic_unregister_driver(int ulp_type)
 {
 	struct cnic_dev *dev;
+	struct cnic_ulp_ops *ulp_ops;
+	int i = 0;
 
 	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
 		printk(KERN_ERR PFX "cnic_unregister_driver: Bad type %d\n",
@@ -372,7 +399,8 @@ int cnic_unregister_driver(int ulp_type)
 		return -EINVAL;
 	}
 	mutex_lock(&cnic_lock);
-	if (!cnic_ulp_tbl[ulp_type]) {
+	ulp_ops = cnic_ulp_tbl[ulp_type];
+	if (!ulp_ops) {
 		printk(KERN_ERR PFX "cnic_unregister_driver: Type %d has not "
 				    "been registered\n", ulp_type);
 		goto out_unlock;
@@ -390,10 +418,21 @@ int cnic_unregister_driver(int ulp_type)
 	}
 	read_unlock(&cnic_dev_lock);
 
+	if (ulp_type == CNIC_ULP_ISCSI)
+		cnic_uio_stop();
+
 	rcu_assign_pointer(cnic_ulp_tbl[ulp_type], NULL);
 
 	mutex_unlock(&cnic_lock);
 	synchronize_rcu();
+	while ((atomic_read(&ulp_ops->ref_count) != 0) && (i < 20)) {
+		msleep(100);
+		i++;
+	}
+
+	if (atomic_read(&ulp_ops->ref_count) != 0)
+		printk(KERN_WARNING PFX "%s: Failed waiting for ref count to go"
+					" to zero.\n", dev->netdev->name);
 	return 0;
 
 out_unlock:
@@ -449,6 +488,7 @@ EXPORT_SYMBOL(cnic_register_driver);
 static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
 {
 	struct cnic_local *cp = dev->cnic_priv;
+	int i = 0;
 
 	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
 		printk(KERN_ERR PFX "cnic_unregister_device: Bad type %d\n",
@@ -469,6 +509,15 @@ static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
 
 	synchronize_rcu();
 
+	while (test_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[ulp_type]) &&
+	       i < 20) {
+		msleep(100);
+		i++;
+	}
+	if (test_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[ulp_type]))
+		printk(KERN_WARNING PFX "%s: Failed waiting for ULP up call"
+					" to complete.\n", dev->netdev->name);
+
 	return 0;
 }
 EXPORT_SYMBOL(cnic_unregister_driver);
@@ -632,7 +681,6 @@ static void cnic_free_resc(struct cnic_dev *dev)
 	int i = 0;
 
 	if (cp->cnic_uinfo) {
-		cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
 		while (cp->uio_dev != -1 && i < 15) {
 			msleep(100);
 			i++;
@@ -1057,18 +1105,26 @@ static void cnic_ulp_stop(struct cnic_dev *dev)
 	struct cnic_local *cp = dev->cnic_priv;
 	int if_type;
 
-	rcu_read_lock();
+	if (cp->cnic_uinfo)
+		cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+
 	for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
 		struct cnic_ulp_ops *ulp_ops;
 
-		ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
-		if (!ulp_ops)
+		mutex_lock(&cnic_lock);
+		ulp_ops = cp->ulp_ops[if_type];
+		if (!ulp_ops) {
+			mutex_unlock(&cnic_lock);
 			continue;
+		}
+		set_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
+		mutex_unlock(&cnic_lock);
 
 		if (test_and_clear_bit(ULP_F_START, &cp->ulp_flags[if_type]))
 			ulp_ops->cnic_stop(cp->ulp_handle[if_type]);
+
+		clear_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
 	}
-	rcu_read_unlock();
 }
 
 static void cnic_ulp_start(struct cnic_dev *dev)
@@ -1076,18 +1132,23 @@ static void cnic_ulp_start(struct cnic_dev *dev)
 	struct cnic_local *cp = dev->cnic_priv;
 	int if_type;
 
-	rcu_read_lock();
 	for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
 		struct cnic_ulp_ops *ulp_ops;
 
-		ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
-		if (!ulp_ops || !ulp_ops->cnic_start)
+		mutex_lock(&cnic_lock);
+		ulp_ops = cp->ulp_ops[if_type];
+		if (!ulp_ops || !ulp_ops->cnic_start) {
+			mutex_unlock(&cnic_lock);
 			continue;
+		}
+		set_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
+		mutex_unlock(&cnic_lock);
 
 		if (!test_and_set_bit(ULP_F_START, &cp->ulp_flags[if_type]))
 			ulp_ops->cnic_start(cp->ulp_handle[if_type]);
+
+		clear_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
 	}
-	rcu_read_unlock();
 }
 
 static int cnic_ctl(void *data, struct cnic_ctl_info *info)
@@ -1097,22 +1158,18 @@ static int cnic_ctl(void *data, struct cnic_ctl_info *info)
 	switch (info->cmd) {
 	case CNIC_CTL_STOP_CMD:
 		cnic_hold(dev);
-		mutex_lock(&cnic_lock);
 
 		cnic_ulp_stop(dev);
 		cnic_stop_hw(dev);
 
-		mutex_unlock(&cnic_lock);
 		cnic_put(dev);
 		break;
 	case CNIC_CTL_START_CMD:
 		cnic_hold(dev);
-		mutex_lock(&cnic_lock);
 
 		if (!cnic_start_hw(dev))
 			cnic_ulp_start(dev);
 
-		mutex_unlock(&cnic_lock);
 		cnic_put(dev);
 		break;
 	default:
@@ -1126,19 +1183,23 @@ static void cnic_ulp_init(struct cnic_dev *dev)
 	int i;
 	struct cnic_local *cp = dev->cnic_priv;
 
-	rcu_read_lock();
 	for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) {
 		struct cnic_ulp_ops *ulp_ops;
 
-		ulp_ops = rcu_dereference(cnic_ulp_tbl[i]);
-		if (!ulp_ops || !ulp_ops->cnic_init)
+		mutex_lock(&cnic_lock);
+		ulp_ops = cnic_ulp_tbl[i];
+		if (!ulp_ops || !ulp_ops->cnic_init) {
+			mutex_unlock(&cnic_lock);
 			continue;
+		}
+		ulp_get(ulp_ops);
+		mutex_unlock(&cnic_lock);
 
 		if (!test_and_set_bit(ULP_F_INIT, &cp->ulp_flags[i]))
 			ulp_ops->cnic_init(dev);
 
+		ulp_put(ulp_ops);
 	}
-	rcu_read_unlock();
 }
 
 static void cnic_ulp_exit(struct cnic_dev *dev)
@@ -1146,19 +1207,23 @@ static void cnic_ulp_exit(struct cnic_dev *dev)
 	int i;
 	struct cnic_local *cp = dev->cnic_priv;
 
-	rcu_read_lock();
 	for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) {
 		struct cnic_ulp_ops *ulp_ops;
 
-		ulp_ops = rcu_dereference(cnic_ulp_tbl[i]);
-		if (!ulp_ops || !ulp_ops->cnic_exit)
+		mutex_lock(&cnic_lock);
+		ulp_ops = cnic_ulp_tbl[i];
+		if (!ulp_ops || !ulp_ops->cnic_exit) {
+			mutex_unlock(&cnic_lock);
 			continue;
+		}
+		ulp_get(ulp_ops);
+		mutex_unlock(&cnic_lock);
 
 		if (test_and_clear_bit(ULP_F_INIT, &cp->ulp_flags[i]))
 			ulp_ops->cnic_exit(dev);
 
+		ulp_put(ulp_ops);
 	}
-	rcu_read_unlock();
 }
 
 static int cnic_cm_offload_pg(struct cnic_sock *csk)
@@ -2374,21 +2439,45 @@ static int cnic_start_bnx2_hw(struct cnic_dev *dev)
 	return 0;
 }
 
-static int cnic_start_hw(struct cnic_dev *dev)
+static int cnic_register_netdev(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
 	struct cnic_eth_dev *ethdev = cp->ethdev;
 	int err;
 
-	if (test_bit(CNIC_F_CNIC_UP, &dev->flags))
-		return -EALREADY;
+	if (!ethdev)
+		return -ENODEV;
+
+	if (ethdev->drv_state & CNIC_DRV_STATE_REGD)
+		return 0;
 
 	err = ethdev->drv_register_cnic(dev->netdev, cp->cnic_ops, dev);
-	if (err) {
+	if (err)
 		printk(KERN_ERR PFX "%s: register_cnic failed\n",
 		       dev->netdev->name);
-		goto err2;
-	}
+
+	return err;
+}
+
+static void cnic_unregister_netdev(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	if (!ethdev)
+		return;
+
+	ethdev->drv_unregister_cnic(dev->netdev);
+}
+
+static int cnic_start_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	int err;
+
+	if (test_bit(CNIC_F_CNIC_UP, &dev->flags))
+		return -EALREADY;
 
 	dev->regview = ethdev->io_base;
 	cp->chip_id = ethdev->chip_id;
@@ -2419,18 +2508,13 @@ static int cnic_start_hw(struct cnic_dev *dev)
 	return 0;
 
 err1:
-	ethdev->drv_unregister_cnic(dev->netdev);
 	cp->free_resc(dev);
 	pci_dev_put(dev->pcidev);
-err2:
 	return err;
 }
 
 static void cnic_stop_bnx2_hw(struct cnic_dev *dev)
 {
-	struct cnic_local *cp = dev->cnic_priv;
-	struct cnic_eth_dev *ethdev = cp->ethdev;
-
 	cnic_disable_bnx2_int_sync(dev);
 
 	cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 0);
@@ -2442,8 +2526,6 @@ static void cnic_stop_bnx2_hw(struct cnic_dev *dev)
 	cnic_setup_5709_context(dev, 0);
 	cnic_free_irq(dev);
 
-	ethdev->drv_unregister_cnic(dev->netdev);
-
 	cnic_free_resc(dev);
 }
 
@@ -2524,7 +2606,7 @@ static struct cnic_dev *init_bnx2_cnic(struct net_device *dev)
 	probe = symbol_get(bnx2_cnic_probe);
 	if (probe) {
 		ethdev = (*probe)(dev);
-		symbol_put_addr(probe);
+		symbol_put(bnx2_cnic_probe);
 	}
 	if (!ethdev)
 		return NULL;
@@ -2627,10 +2709,12 @@ static int cnic_netdev_event(struct notifier_block *this, unsigned long event,
 		else if (event == NETDEV_UNREGISTER)
 			cnic_ulp_exit(dev);
 		else if (event == NETDEV_UP) {
-			mutex_lock(&cnic_lock);
+			if (cnic_register_netdev(dev) != 0) {
+				cnic_put(dev);
+				goto done;
+			}
 			if (!cnic_start_hw(dev))
 				cnic_ulp_start(dev);
-			mutex_unlock(&cnic_lock);
 		}
 
 		rcu_read_lock();
@@ -2649,10 +2733,9 @@ static int cnic_netdev_event(struct notifier_block *this, unsigned long event,
 		rcu_read_unlock();
 
 		if (event == NETDEV_GOING_DOWN) {
-			mutex_lock(&cnic_lock);
 			cnic_ulp_stop(dev);
 			cnic_stop_hw(dev);
-			mutex_unlock(&cnic_lock);
+			cnic_unregister_netdev(dev);
 		} else if (event == NETDEV_UNREGISTER) {
 			write_lock(&cnic_dev_lock);
 			list_del_init(&dev->list);
@@ -2684,6 +2767,7 @@ static void cnic_release(void)
 		}
 
 		cnic_ulp_exit(dev);
+		cnic_unregister_netdev(dev);
 		list_del_init(&dev->list);
 		cnic_free_dev(dev);
 	}
diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h
index 5192d4a9df5..a94b302bb46 100644
--- a/drivers/net/cnic.h
+++ b/drivers/net/cnic.h
@@ -176,6 +176,7 @@ struct cnic_local {
 	unsigned long ulp_flags[MAX_CNIC_ULP_TYPE];
 #define ULP_F_INIT	0
 #define ULP_F_START	1
+#define ULP_F_CALL_PENDING	2
 	struct cnic_ulp_ops *ulp_ops[MAX_CNIC_ULP_TYPE];
 
 	/* protected by ulp_lock */
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
index d1bce27ee99..a49235739ee 100644
--- a/drivers/net/cnic_if.h
+++ b/drivers/net/cnic_if.h
@@ -290,6 +290,7 @@ struct cnic_ulp_ops {
 	void (*iscsi_nl_send_msg)(struct cnic_dev *dev, u32 msg_type,
 				  char *data, u16 data_size);
 	struct module *owner;
+	atomic_t ref_count;
 };
 
 extern int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops);
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 58afafbd3b9..fd5e32cbcb8 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -1097,7 +1097,7 @@ static const struct net_device_ops cpmac_netdev_ops = {
 	.ndo_start_xmit		= cpmac_start_xmit,
 	.ndo_tx_timeout		= cpmac_tx_timeout,
 	.ndo_set_multicast_list	= cpmac_set_multicast_list,
-	.ndo_so_ioctl		= cpmac_ioctl,
+	.ndo_do_ioctl		= cpmac_ioctl,
 	.ndo_set_config		= cpmac_config,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 3eee666a9cd..55445f980f9 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -1524,6 +1524,7 @@ static void net_timeout(struct net_device *dev)
 static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
 {
 	struct net_local *lp = netdev_priv(dev);
+	unsigned long flags;
 
 	if (net_debug > 3) {
 		printk("%s: sent %d byte packet of type %x\n",
@@ -1535,7 +1536,7 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
                   ask the chip to start transmitting before the
                   whole packet has been completely uploaded. */
 
-	spin_lock_irq(&lp->lock);
+	spin_lock_irqsave(&lp->lock, flags);
 	netif_stop_queue(dev);
 
 	/* initiate a transmit sequence */
@@ -1549,13 +1550,13 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
 		 * we're waiting for TxOk, so return 1 and requeue this packet.
 		 */
 
-		spin_unlock_irq(&lp->lock);
+		spin_unlock_irqrestore(&lp->lock, flags);
 		if (net_debug) printk("cs89x0: Tx buffer not free!\n");
 		return NETDEV_TX_BUSY;
 	}
 	/* Write the contents of the packet */
 	writewords(dev->base_addr, TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
-	spin_unlock_irq(&lp->lock);
+	spin_unlock_irqrestore(&lp->lock, flags);
 	lp->stats.tx_bytes += skb->len;
 	dev->trans_start = jiffies;
 	dev_kfree_skb (skb);
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 538dda4422d..fb5df5c6203 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -642,8 +642,7 @@ static int setup_sge_qsets(struct adapter *adap)
 		struct port_info *pi = netdev_priv(dev);
 
 		pi->qs = &adap->sge.qs[pi->first_qset];
-		for (j = pi->first_qset; j < pi->first_qset + pi->nqsets;
-		     ++j, ++qset_idx) {
+		for (j = 0; j < pi->nqsets; ++j, ++qset_idx) {
 			set_qset_lro(dev, qset_idx, pi->rx_offload & T3_LRO);
 			err = t3_sge_alloc_qset(adap, qset_idx, 1,
 				(adap->flags & USING_MSIX) ? qset_idx + 1 :
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 2df8fb0af70..12fd446f989 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -1820,11 +1820,19 @@ static int emac_dev_setmac_addr(struct net_device *ndev, void *addr)
 	struct device *emac_dev = &priv->ndev->dev;
 	struct sockaddr *sa = addr;
 
+	if (!is_valid_ether_addr(sa->sa_data))
+		return -EINVAL;
+
 	/* Store mac addr in priv and rx channel and set it in EMAC hw */
 	memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len);
-	memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len);
 	memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len);
-	emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr);
+
+	/* If the interface is down - rxch is NULL. */
+	/* MAC address is configured only after the interface is enabled. */
+	if (netif_running(ndev)) {
+		memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len);
+		emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr);
+	}
 
 	if (netif_msg_drv(priv))
 		dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n",
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 895d72143ee..4b6a219fece 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -268,8 +268,9 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
 		printk(KERN_INFO "tx_coalesce:\t%d packets\n",
 				tx_coalesce);
 	if (np->coalesce)
-		printk(KERN_INFO "rx_coalesce:\t%d packets\n"
-		       KERN_INFO "rx_timeout: \t%d ns\n",
+		printk(KERN_INFO
+		       "rx_coalesce:\t%d packets\n"
+		       "rx_timeout: \t%d ns\n",
 				np->rx_coalesce, np->rx_timeout*640);
 	if (np->vlan)
 		printk(KERN_INFO "vlan(id):\t%d\n", np->vlan);
@@ -1522,9 +1523,9 @@ mii_get_media (struct net_device *dev)
 			printk (KERN_INFO "Operating at 10 Mbps, ");
 		}
 		if (bmcr & MII_BMCR_DUPLEX_MODE) {
-			printk ("Full duplex\n");
+			printk (KERN_CONT "Full duplex\n");
 		} else {
-			printk ("Half duplex\n");
+			printk (KERN_CONT "Half duplex\n");
 		}
 	}
 	if (np->tx_flow)
@@ -1614,9 +1615,9 @@ mii_set_media (struct net_device *dev)
 		}
 		if (np->full_duplex) {
 			bmcr |= MII_BMCR_DUPLEX_MODE;
-			printk ("Full duplex\n");
+			printk (KERN_CONT "Full duplex\n");
 		} else {
-			printk ("Half duplex\n");
+			printk (KERN_CONT "Half duplex\n");
 		}
 #if 0
 		/* Set 1000BaseT Master/Slave setting */
@@ -1669,9 +1670,9 @@ mii_get_media_pcs (struct net_device *dev)
 		__u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR);
 		printk (KERN_INFO "Operating at 1000 Mbps, ");
 		if (bmcr & MII_BMCR_DUPLEX_MODE) {
-			printk ("Full duplex\n");
+			printk (KERN_CONT "Full duplex\n");
 		} else {
-			printk ("Half duplex\n");
+			printk (KERN_CONT "Half duplex\n");
 		}
 	}
 	if (np->tx_flow)
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index efa680f4b8d..3a6735dc9f6 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1897,6 +1897,9 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 
 			if (ioread8(&nic->csr->scb.status) & rus_no_res)
 				nic->ru_running = RU_SUSPENDED;
+		pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+					       sizeof(struct rfd),
+					       PCI_DMA_FROMDEVICE);
 		return -ENODATA;
 	}
 
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 5e3356f8eb5..5b8cbdb4b52 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2185,12 +2185,16 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
 	/* Free all the Rx ring sk_buffs */
 	for (i = 0; i < rx_ring->count; i++) {
 		buffer_info = &rx_ring->buffer_info[i];
-		if (buffer_info->skb) {
+		if (buffer_info->dma) {
 			pci_unmap_single(pdev,
 					 buffer_info->dma,
 					 buffer_info->length,
 					 PCI_DMA_FROMDEVICE);
+		}
+
+		buffer_info->dma = 0;
 
+		if (buffer_info->skb) {
 			dev_kfree_skb(buffer_info->skb);
 			buffer_info->skb = NULL;
 		}
@@ -4033,6 +4037,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		                 buffer_info->dma,
 		                 buffer_info->length,
 		                 PCI_DMA_FROMDEVICE);
+		buffer_info->dma = 0;
 
 		length = le16_to_cpu(rx_desc->length);
 		/* !EOP means multiple descriptors were used to store a single
@@ -4222,6 +4227,7 @@ map_skb:
 			pci_unmap_single(pdev, buffer_info->dma,
 					 adapter->rx_buffer_len,
 					 PCI_DMA_FROMDEVICE);
+			buffer_info->dma = 0;
 
 			break; /* while !buffer_info->skb */
 		}
@@ -4817,6 +4823,9 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
 
 	netif_device_detach(netdev);
 
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
 	if (netif_running(netdev))
 		e1000_down(adapter);
 	pci_disable_device(pdev);
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 8890c97e112..c0f185beb8b 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -238,6 +238,7 @@
 #define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
 #define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
 #define E1000_STATUS_LAN_INIT_DONE 0x00000200   /* Lan Init Completion by NVM */
+#define E1000_STATUS_PHYRA      0x00000400      /* PHY Reset Asserted */
 #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
 
 /* Constants used to interpret the masked PCI-X bus speed. */
@@ -575,6 +576,8 @@
 #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
 #define PHY_EXT_STATUS   0x0F /* Extended Status Reg */
 
+#define PHY_CONTROL_LB   0x4000 /* PHY Loopback bit */
+
 /* NVM Control */
 #define E1000_EECD_SK        0x00000001 /* NVM Clock */
 #define E1000_EECD_CS        0x00000002 /* NVM Chip Select */
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 163c1c0cfee..fd44d9f9076 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -215,6 +215,7 @@ enum e1e_registers {
 	E1000_SWSM      = 0x05B50, /* SW Semaphore */
 	E1000_FWSM      = 0x05B54, /* FW Semaphore */
 	E1000_SWSM2     = 0x05B58, /* Driver-only SW semaphore */
+	E1000_CRC_OFFSET = 0x05F50, /* CRC Offset register */
 	E1000_HICR      = 0x08F00, /* Host Interface Control */
 };
 
@@ -302,6 +303,9 @@ enum e1e_registers {
 #define E1000_KMRNCTRLSTA_REN		0x00200000
 #define E1000_KMRNCTRLSTA_DIAG_OFFSET	0x3    /* Kumeran Diagnostic */
 #define E1000_KMRNCTRLSTA_DIAG_NELPBK	0x1000 /* Nearend Loopback mode */
+#define E1000_KMRNCTRLSTA_K1_CONFIG	0x7
+#define E1000_KMRNCTRLSTA_K1_ENABLE	0x140E
+#define E1000_KMRNCTRLSTA_K1_DISABLE	0x1400
 
 #define IFE_PHY_EXTENDED_STATUS_CONTROL	0x10
 #define IFE_PHY_SPECIAL_CONTROL		0x11 /* 100BaseTx PHY Special Control */
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 9e23f50fb9c..99df2abf82a 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -338,9 +338,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
 {
 	struct e1000_nvm_info *nvm = &hw->nvm;
 	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
-	u32 gfpreg;
-	u32 sector_base_addr;
-	u32 sector_end_addr;
+	u32 gfpreg, sector_base_addr, sector_end_addr;
 	u16 i;
 
 	/* Can't read flash registers if the register set isn't mapped. */
@@ -446,6 +444,95 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 	return 0;
 }
 
+/**
+ *  e1000_check_for_copper_link_ich8lan - Check for link (Copper)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks to see of the link status of the hardware has changed.  If a
+ *  change in link status has been detected, then we read the PHY registers
+ *  to get the current speed/duplex if link exists.
+ **/
+static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	bool link;
+
+	/*
+	 * We only want to go out to the PHY registers to see if Auto-Neg
+	 * has completed and/or if our link status has changed.  The
+	 * get_link_status flag is set upon receiving a Link Status
+	 * Change or Rx Sequence Error interrupt.
+	 */
+	if (!mac->get_link_status) {
+		ret_val = 0;
+		goto out;
+	}
+
+	if (hw->mac.type == e1000_pchlan) {
+		ret_val = e1000e_write_kmrn_reg(hw,
+		                                   E1000_KMRNCTRLSTA_K1_CONFIG,
+		                                   E1000_KMRNCTRLSTA_K1_ENABLE);
+		if (ret_val)
+			goto out;
+	}
+
+	/*
+	 * First we want to see if the MII Status Register reports
+	 * link.  If so, then we want to get the current speed/duplex
+	 * of the PHY.
+	 */
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (!link)
+		goto out; /* No link detected */
+
+	mac->get_link_status = false;
+
+	if (hw->phy.type == e1000_phy_82578) {
+		ret_val = e1000_link_stall_workaround_hv(hw);
+		if (ret_val)
+			goto out;
+	}
+
+	/*
+	 * Check if there was DownShift, must be checked
+	 * immediately after link-up
+	 */
+	e1000e_check_downshift(hw);
+
+	/*
+	 * If we are forcing speed/duplex, then we simply return since
+	 * we have already determined whether we have link or not.
+	 */
+	if (!mac->autoneg) {
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	/*
+	 * Auto-Neg is enabled.  Auto Speed Detection takes care
+	 * of MAC speed/duplex configuration.  So we only need to
+	 * configure Collision Distance in the MAC.
+	 */
+	e1000e_config_collision_dist(hw);
+
+	/*
+	 * Configure Flow Control now that Auto-Neg has completed.
+	 * First, we need to restore the desired flow control
+	 * settings because we may have had to re-autoneg with a
+	 * different link partner.
+	 */
+	ret_val = e1000e_config_fc_after_link_up(hw);
+	if (ret_val)
+		hw_dbg(hw, "Error configuring flow control\n");
+
+out:
+	return ret_val;
+}
+
 static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
@@ -490,8 +577,8 @@ static DEFINE_MUTEX(nvm_mutex);
  **/
 static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 {
-	u32 extcnf_ctrl;
-	u32 timeout = PHY_CFG_TIMEOUT;
+	u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT;
+	s32 ret_val = 0;
 
 	might_sleep();
 
@@ -499,28 +586,46 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 
 	while (timeout) {
 		extcnf_ctrl = er32(EXTCNF_CTRL);
+		if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG))
+			break;
 
-		if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)) {
-			extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
-			ew32(EXTCNF_CTRL, extcnf_ctrl);
+		mdelay(1);
+		timeout--;
+	}
+
+	if (!timeout) {
+		hw_dbg(hw, "SW/FW/HW has locked the resource for too long.\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	timeout = PHY_CFG_TIMEOUT * 2;
+
+	extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+	ew32(EXTCNF_CTRL, extcnf_ctrl);
+
+	while (timeout) {
+		extcnf_ctrl = er32(EXTCNF_CTRL);
+		if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+			break;
 
-			extcnf_ctrl = er32(EXTCNF_CTRL);
-			if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
-				break;
-		}
 		mdelay(1);
 		timeout--;
 	}
 
 	if (!timeout) {
-		hw_dbg(hw, "FW or HW has locked the resource for too long.\n");
+		hw_dbg(hw, "Failed to acquire the semaphore.\n");
 		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
 		ew32(EXTCNF_CTRL, extcnf_ctrl);
-		mutex_unlock(&nvm_mutex);
-		return -E1000_ERR_CONFIG;
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
 	}
 
-	return 0;
+out:
+	if (ret_val)
+		mutex_unlock(&nvm_mutex);
+
+	return ret_val;
 }
 
 /**
@@ -694,6 +799,38 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_lan_init_done_ich8lan - Check for PHY config completion
+ *  @hw: pointer to the HW structure
+ *
+ *  Check the appropriate indication the MAC has finished configuring the
+ *  PHY after a software reset.
+ **/
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
+{
+	u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT;
+
+	/* Wait for basic configuration completes before proceeding */
+	do {
+		data = er32(STATUS);
+		data &= E1000_STATUS_LAN_INIT_DONE;
+		udelay(100);
+	} while ((!data) && --loop);
+
+	/*
+	 * If basic configuration is incomplete before the above loop
+	 * count reaches 0, loading the configuration from NVM will
+	 * leave the PHY in a bad state possibly resulting in no link.
+	 */
+	if (loop == 0)
+		hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
+
+	/* Clear the Init Done bit for the next init event */
+	data = er32(STATUS);
+	data &= ~E1000_STATUS_LAN_INIT_DONE;
+	ew32(STATUS, data);
+}
+
+/**
  *  e1000_phy_hw_reset_ich8lan - Performs a PHY reset
  *  @hw: pointer to the HW structure
  *
@@ -707,13 +844,15 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
 	u32 i;
 	u32 data, cnf_size, cnf_base_addr, sw_cfg_mask;
 	s32 ret_val;
-	u16 loop = E1000_ICH8_LAN_INIT_TIMEOUT;
 	u16 word_addr, reg_data, reg_addr, phy_page = 0;
 
 	ret_val = e1000e_phy_hw_reset_generic(hw);
 	if (ret_val)
 		return ret_val;
 
+	/* Allow time for h/w to get to a quiescent state after reset */
+	mdelay(10);
+
 	if (hw->mac.type == e1000_pchlan) {
 		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
 		if (ret_val)
@@ -741,26 +880,8 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
 		if (!(data & sw_cfg_mask))
 			return 0;
 
-		/* Wait for basic configuration completes before proceeding*/
-		do {
-			data = er32(STATUS);
-			data &= E1000_STATUS_LAN_INIT_DONE;
-			udelay(100);
-		} while ((!data) && --loop);
-
-		/*
-		 * If basic configuration is incomplete before the above loop
-		 * count reaches 0, loading the configuration from NVM will
-		 * leave the PHY in a bad state possibly resulting in no link.
-		 */
-		if (loop == 0) {
-			hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
-		}
-
-		/* Clear the Init Done bit for the next init event */
-		data = er32(STATUS);
-		data &= ~E1000_STATUS_LAN_INIT_DONE;
-		ew32(STATUS, data);
+		/* Wait for basic configuration completes before proceeding */
+		e1000_lan_init_done_ich8lan(hw);
 
 		/*
 		 * Make sure HW does not configure LCD from PHY
@@ -961,12 +1082,14 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 		phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
 		ew32(PHY_CTRL, phy_ctrl);
 
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
 		/*
 		 * Call gig speed drop workaround on LPLU before accessing
 		 * any PHY registers
 		 */
-		if ((hw->mac.type == e1000_ich8lan) &&
-		    (hw->phy.type == e1000_phy_igp_3))
+		if (hw->mac.type == e1000_ich8lan)
 			e1000e_gig_downshift_workaround_ich8lan(hw);
 
 		/* When LPLU is enabled, we should disable SmartSpeed */
@@ -979,6 +1102,9 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 		phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
 		ew32(PHY_CTRL, phy_ctrl);
 
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
 		/*
 		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
 		 * during Dx states where the power conservation is most
@@ -1038,6 +1164,10 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 	if (!active) {
 		phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
 		ew32(PHY_CTRL, phy_ctrl);
+
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
 		/*
 		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
 		 * during Dx states where the power conservation is most
@@ -1073,12 +1203,14 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 		phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
 		ew32(PHY_CTRL, phy_ctrl);
 
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
 		/*
 		 * Call gig speed drop workaround on LPLU before accessing
 		 * any PHY registers
 		 */
-		if ((hw->mac.type == e1000_ich8lan) &&
-		    (hw->phy.type == e1000_phy_igp_3))
+		if (hw->mac.type == e1000_ich8lan)
 			e1000e_gig_downshift_workaround_ich8lan(hw);
 
 		/* When LPLU is enabled, we should disable SmartSpeed */
@@ -1175,7 +1307,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 	struct e1000_nvm_info *nvm = &hw->nvm;
 	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
 	u32 act_offset;
-	s32 ret_val;
+	s32 ret_val = 0;
 	u32 bank = 0;
 	u16 i, word;
 
@@ -1190,12 +1322,15 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 		goto out;
 
 	ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
-	if (ret_val)
-		goto release;
+	if (ret_val) {
+		hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n");
+		bank = 0;
+	}
 
 	act_offset = (bank) ? nvm->flash_bank_size : 0;
 	act_offset += offset;
 
+	ret_val = 0;
 	for (i = 0; i < words; i++) {
 		if ((dev_spec->shadow_ram) &&
 		    (dev_spec->shadow_ram[offset+i].modified)) {
@@ -1210,7 +1345,6 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 		}
 	}
 
-release:
 	e1000_release_swflag_ich8lan(hw);
 
 out:
@@ -1461,7 +1595,6 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 {
 	struct e1000_nvm_info *nvm = &hw->nvm;
 	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
-	s32 ret_val;
 	u16 i;
 
 	if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
@@ -1470,17 +1603,11 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 		return -E1000_ERR_NVM;
 	}
 
-	ret_val = e1000_acquire_swflag_ich8lan(hw);
-	if (ret_val)
-		return ret_val;
-
 	for (i = 0; i < words; i++) {
 		dev_spec->shadow_ram[offset+i].modified = 1;
 		dev_spec->shadow_ram[offset+i].value = data[i];
 	}
 
-	e1000_release_swflag_ich8lan(hw);
-
 	return 0;
 }
 
@@ -1521,8 +1648,8 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	 */
 	ret_val =  e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
 	if (ret_val) {
-		e1000_release_swflag_ich8lan(hw);
-		goto out;
+		hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n");
+		bank = 0;
 	}
 
 	if (bank == 0) {
@@ -1905,19 +2032,15 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
 		break;
 	case 1:
 		sector_size = ICH_FLASH_SEG_SIZE_4K;
-		iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_4K;
+		iteration = 1;
 		break;
 	case 2:
-		if (hw->mac.type == e1000_ich9lan) {
-			sector_size = ICH_FLASH_SEG_SIZE_8K;
-			iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_8K;
-		} else {
-			return -E1000_ERR_NVM;
-		}
+		sector_size = ICH_FLASH_SEG_SIZE_8K;
+		iteration = 1;
 		break;
 	case 3:
 		sector_size = ICH_FLASH_SEG_SIZE_64K;
-		iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_64K;
+		iteration = 1;
 		break;
 	default:
 		return -E1000_ERR_NVM;
@@ -1925,7 +2048,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
 
 	/* Start with the base address, then add the sector offset. */
 	flash_linear_addr = hw->nvm.flash_base_addr;
-	flash_linear_addr += (bank) ? (sector_size * iteration) : 0;
+	flash_linear_addr += (bank) ? flash_bank_size : 0;
 
 	for (j = 0; j < iteration ; j++) {
 		do {
@@ -2143,6 +2266,12 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	ctrl = er32(CTRL);
 
 	if (!e1000_check_reset_block(hw)) {
+		/* Clear PHY Reset Asserted bit */
+		if (hw->mac.type >= e1000_pchlan) {
+			u32 status = er32(STATUS);
+			ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+		}
+
 		/*
 		 * PHY HW reset requires MAC CORE reset at the same
 		 * time to make sure the interface between MAC and the
@@ -2156,23 +2285,34 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	ew32(CTRL, (ctrl | E1000_CTRL_RST));
 	msleep(20);
 
-	if (!ret_val) {
-		/* release the swflag because it is not reset by
-		 * hardware reset
-		 */
+	if (!ret_val)
 		e1000_release_swflag_ich8lan(hw);
-	}
 
-	ret_val = e1000e_get_auto_rd_done(hw);
-	if (ret_val) {
-		/*
-		 * When auto config read does not complete, do not
-		 * return with an error. This can happen in situations
-		 * where there is no eeprom and prevents getting link.
-		 */
-		hw_dbg(hw, "Auto Read Done did not complete\n");
+	if (ctrl & E1000_CTRL_PHY_RST)
+		ret_val = hw->phy.ops.get_cfg_done(hw);
+
+	if (hw->mac.type >= e1000_ich10lan) {
+		e1000_lan_init_done_ich8lan(hw);
+	} else {
+		ret_val = e1000e_get_auto_rd_done(hw);
+		if (ret_val) {
+			/*
+			 * When auto config read does not complete, do not
+			 * return with an error. This can happen in situations
+			 * where there is no eeprom and prevents getting link.
+			 */
+			hw_dbg(hw, "Auto Read Done did not complete\n");
+		}
 	}
 
+	/*
+	 * For PCH, this write will make sure that any noise
+	 * will be detected as a CRC error and be dropped rather than show up
+	 * as a bad packet to the DMA engine.
+	 */
+	if (hw->mac.type == e1000_pchlan)
+		ew32(CRC_OFFSET, 0x65656565);
+
 	ew32(IMC, 0xffffffff);
 	icr = er32(ICR);
 
@@ -2222,6 +2362,18 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 	for (i = 0; i < mac->mta_reg_count; i++)
 		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
+	/*
+	 * The 82578 Rx buffer will stall if wakeup is enabled in host and
+	 * the ME.  Reading the BM_WUC register will clear the host wakeup bit.
+	 * Reset the phy after disabling host wakeup to reset the Rx buffer.
+	 */
+	if (hw->phy.type == e1000_phy_82578) {
+		hw->phy.ops.read_phy_reg(hw, BM_WUC, &i);
+		ret_val = e1000_phy_hw_reset_ich8lan(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
 	/* Setup link and flow control */
 	ret_val = e1000_setup_link_ich8lan(hw);
 
@@ -2254,16 +2406,6 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 	ew32(CTRL_EXT, ctrl_ext);
 
 	/*
-	 * The 82578 Rx buffer will stall if wakeup is enabled in host and
-	 * the ME.  Reading the BM_WUC register will clear the host wakeup bit.
-	 * Reset the phy after disabling host wakeup to reset the Rx buffer.
-	 */
-	if (hw->phy.type == e1000_phy_82578) {
-		e1e_rphy(hw, BM_WUC, &i);
-		e1000e_phy_hw_reset_generic(hw);
-	}
-
-	/*
 	 * Clear all of the statistics registers (clear on read).  It is
 	 * important that we do this after we have tried to establish link
 	 * because the symbol error count will increment wildly if there
@@ -2485,6 +2627,14 @@ static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed,
 	if (ret_val)
 		return ret_val;
 
+	if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) {
+		ret_val = e1000e_write_kmrn_reg(hw,
+		                                  E1000_KMRNCTRLSTA_K1_CONFIG,
+		                                  E1000_KMRNCTRLSTA_K1_DISABLE);
+		if (ret_val)
+			return ret_val;
+	}
+
 	if ((hw->mac.type == e1000_ich8lan) &&
 	    (hw->phy.type == e1000_phy_igp_3) &&
 	    (*speed == SPEED_1000)) {
@@ -2850,6 +3000,16 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
 {
 	u32 bank = 0;
 
+	if (hw->mac.type >= e1000_pchlan) {
+		u32 status = er32(STATUS);
+
+		if (status & E1000_STATUS_PHYRA)
+			ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+		else
+			hw_dbg(hw,
+			       "PHY Reset Asserted not set - needs delay\n");
+	}
+
 	e1000e_get_cfg_done(hw);
 
 	/* If EEPROM is not marked present, init the IGP 3 PHY manually */
@@ -2921,7 +3081,7 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 static struct e1000_mac_operations ich8_mac_ops = {
 	.id_led_init		= e1000e_id_led_init,
 	.check_mng_mode		= e1000_check_mng_mode_ich8lan,
-	.check_for_link		= e1000e_check_for_copper_link,
+	.check_for_link		= e1000_check_for_copper_link_ich8lan,
 	/* cleanup_led dependent on mac type */
 	.clear_hw_cntrs		= e1000_clear_hw_cntrs_ich8lan,
 	.get_bus_info		= e1000_get_bus_info_ich8lan,
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index be6d9e99037..99ba2b8a2a0 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -378,12 +378,6 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
 
 	mac->get_link_status = 0;
 
-	if (hw->phy.type == e1000_phy_82578) {
-		ret_val = e1000_link_stall_workaround_hv(hw);
-		if (ret_val)
-			return ret_val;
-	}
-
 	/*
 	 * Check if there was DownShift, must be checked
 	 * immediately after link-up
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 679885a122b..fa92a683aef 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4538,8 +4538,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 		/* Allow time for pending master requests to run */
 		e1000e_disable_pcie_master(&adapter->hw);
 
-		if ((adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) &&
-		    !(hw->mac.ops.check_mng_mode(hw))) {
+		if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
 			/* enable wakeup by the PHY */
 			retval = e1000_init_phy_wakeup(adapter, wufc);
 			if (retval)
@@ -4557,7 +4556,8 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 	*enable_wake = !!wufc;
 
 	/* make sure adapter isn't asleep if manageability is enabled */
-	if (adapter->flags & FLAG_MNG_PT_ENABLED)
+	if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
+	    (hw->mac.ops.check_mng_mode(hw)))
 		*enable_wake = true;
 
 	if (adapter->hw.phy.type == e1000_phy_igp_3)
@@ -4670,14 +4670,6 @@ static int e1000_resume(struct pci_dev *pdev)
 		return err;
 	}
 
-	/* AER (Advanced Error Reporting) hooks */
-	err = pci_enable_pcie_error_reporting(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
-		                    "0x%x\n", err);
-		/* non-fatal, continue */
-	}
-
 	pci_set_master(pdev);
 
 	pci_enable_wake(pdev, PCI_D3hot, 0);
@@ -4785,6 +4777,9 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
 
 	netif_device_detach(netdev);
 
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
 	if (netif_running(netdev))
 		e1000e_down(adapter);
 	pci_disable_device(pdev);
@@ -4987,6 +4982,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	if (err)
 		goto err_pci_reg;
 
+	/* AER (Advanced Error Reporting) hooks */
+	err = pci_enable_pcie_error_reporting(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
+		        "0x%x\n", err);
+		/* non-fatal, continue */
+	}
+
 	pci_set_master(pdev);
 	/* PCI config space info */
 	err = pci_save_state(pdev);
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index e23459cf3d0..994401fd066 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1531,7 +1531,12 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
 		 */
 		ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
 		if (ret_val)
-			break;
+			/*
+			 * If the first read fails, another entity may have
+			 * ownership of the resources, wait and try again to
+			 * see if they have relinquished the resources yet.
+			 */
+			udelay(usec_interval);
 		ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
 		if (ret_val)
 			break;
@@ -2737,6 +2742,11 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
 	if (hw->phy.type != e1000_phy_82578)
 		goto out;
 
+	/* Do not apply workaround if in PHY loopback bit 14 set */
+	hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &data);
+	if (data & PHY_CONTROL_LB)
+		goto out;
+
 	/* check if link is up and at 1Gbps */
 	ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data);
 	if (ret_val)
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index cc2ab6412c7..4f700348534 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1784,7 +1784,7 @@ int __init init_module(void)
 		printk(KERN_INFO "eepro_init_module: Auto-detecting boards (May God protect us...)\n");
 	}
 
-	for (i = 0; io[i] != -1 && i < MAX_EEPRO; i++) {
+	for (i = 0; i < MAX_EEPRO && io[i] != -1; i++) {
 		dev = alloc_etherdev(sizeof(struct eepro_local));
 		if (!dev)
 			break;
diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
index 1686dca2874..1f016d66684 100644
--- a/drivers/net/eexpress.c
+++ b/drivers/net/eexpress.c
@@ -1474,13 +1474,13 @@ static void eexp_hw_init586(struct net_device *dev)
 	outw(0x0000, ioaddr + 0x800c);
 	outw(0x0000, ioaddr + 0x800e);
 
-	for (i = 0; i < (sizeof(start_code)); i+=32) {
+	for (i = 0; i < ARRAY_SIZE(start_code) * 2; i+=32) {
 		int j;
 		outw(i, ioaddr + SM_PTR);
-		for (j = 0; j < 16; j+=2)
+		for (j = 0; j < 16 && (i+j)/2 < ARRAY_SIZE(start_code); j+=2)
 			outw(start_code[(i+j)/2],
 			     ioaddr+0x4000+j);
-		for (j = 0; j < 16; j+=2)
+		for (j = 0; j < 16 && (i+j+16)/2 < ARRAY_SIZE(start_code); j+=2)
 			outw(start_code[(i+j+16)/2],
 			     ioaddr+0x8000+j);
 	}
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 78952f8324e..fa311a95099 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0101"
+#define DRV_VERSION	"EHEA_0102"
 
 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 147c4b088fb..977c3d35827 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -1545,6 +1545,9 @@ static int ehea_clean_portres(struct ehea_port *port, struct ehea_port_res *pr)
 {
 	int ret, i;
 
+	if (pr->qp)
+		netif_napi_del(&pr->napi);
+
 	ret = ehea_destroy_qp(pr->qp);
 
 	if (!ret) {
@@ -3080,7 +3083,9 @@ static const struct net_device_ops ehea_netdev_ops = {
 	.ndo_poll_controller	= ehea_netpoll,
 #endif
 	.ndo_get_stats		= ehea_get_stats,
+	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= ehea_set_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_multicast_list	= ehea_set_multicast_list,
 	.ndo_change_mtu		= ehea_change_mtu,
 	.ndo_vlan_rx_register	= ehea_vlan_rx_register,
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index b60e27dfcfa..88d7ebf3122 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -338,8 +338,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev,
 #ifndef MODULE
 	static int printed_version;
 	if (!printed_version++)
-		printk (KERN_INFO "%s" KERN_INFO "%s",
-			version, version2);
+		printk(KERN_INFO "%s%s", version, version2);
 #endif
 
 	card_idx++;
@@ -1600,7 +1599,7 @@ static int __init epic_init (void)
 {
 /* when a module, this is printed whether or not devices are found in probe */
 #ifdef MODULE
-	printk (KERN_INFO "%s" KERN_INFO "%s",
+	printk (KERN_INFO "%s%s",
 		version, version2);
 #endif
 
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index 891be28a7d4..160655d2458 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -584,7 +584,8 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev,
 	if (np->flags == HAS_MII_XCVR) {
 		int phy, phy_idx = 0;
 
-		for (phy = 1; phy < 32 && phy_idx < 4; phy++) {
+		for (phy = 1; phy < 32 && phy_idx < ARRAY_SIZE(np->phys);
+			       phy++) {
 			int mii_status = mdio_read(dev, phy, 1);
 
 			if (mii_status != 0xffff && mii_status != 0x0000) {
@@ -1209,17 +1210,20 @@ static void fealnx_tx_timeout(struct net_device *dev)
 	unsigned long flags;
 	int i;
 
-	printk(KERN_WARNING "%s: Transmit timed out, status %8.8x,"
-	       " resetting...\n", dev->name, ioread32(ioaddr + ISR));
+	printk(KERN_WARNING
+	       "%s: Transmit timed out, status %8.8x, resetting...\n",
+	       dev->name, ioread32(ioaddr + ISR));
 
 	{
 		printk(KERN_DEBUG "  Rx ring %p: ", np->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++)
-			printk(" %8.8x", (unsigned int) np->rx_ring[i].status);
-		printk("\n" KERN_DEBUG "  Tx ring %p: ", np->tx_ring);
+			printk(KERN_CONT " %8.8x",
+			       (unsigned int) np->rx_ring[i].status);
+		printk(KERN_CONT "\n");
+		printk(KERN_DEBUG "  Tx ring %p: ", np->tx_ring);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(" %4.4x", np->tx_ring[i].status);
-		printk("\n");
+			printk(KERN_CONT " %4.4x", np->tx_ring[i].status);
+		printk(KERN_CONT "\n");
 	}
 
 	spin_lock_irqsave(&np->lock, flags);
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 0f19b743749..c9fd82d3a80 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -285,6 +285,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
 	struct bufdesc *bdp;
+	void *bufaddr;
 	unsigned short	status;
 	unsigned long flags;
 
@@ -312,7 +313,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	status &= ~BD_ENET_TX_STATS;
 
 	/* Set buffer length and buffer pointer */
-	bdp->cbd_bufaddr = __pa(skb->data);
+	bufaddr = skb->data;
 	bdp->cbd_datlen = skb->len;
 
 	/*
@@ -320,11 +321,11 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 * 4-byte boundaries. Use bounce buffers to copy data
 	 * and get it aligned. Ugh.
 	 */
-	if (bdp->cbd_bufaddr & FEC_ALIGNMENT) {
+	if (((unsigned long) bufaddr) & FEC_ALIGNMENT) {
 		unsigned int index;
 		index = bdp - fep->tx_bd_base;
 		memcpy(fep->tx_bounce[index], (void *)skb->data, skb->len);
-		bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]);
+		bufaddr = fep->tx_bounce[index];
 	}
 
 	/* Save skb pointer */
@@ -336,7 +337,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Push the data cache so the CPM does not get stale memory
 	 * data.
 	 */
-	bdp->cbd_bufaddr = dma_map_single(&dev->dev, skb->data,
+	bdp->cbd_bufaddr = dma_map_single(&dev->dev, bufaddr,
 			FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
 
 	/* Send it on its way.  Tell FEC it's ready, interrupt when done,
@@ -1642,6 +1643,7 @@ static const struct net_device_ops fec_netdev_ops = {
 	.ndo_stop		= fec_enet_close,
 	.ndo_start_xmit		= fec_enet_start_xmit,
 	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_tx_timeout		= fec_timeout,
 	.ndo_set_mac_address	= fec_set_mac_address,
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index 30b7dd67133..cc47f3f057c 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -46,12 +46,12 @@
 
 #else
 
-#define FEC_ECNTRL;		0x000 /* Ethernet control reg */
-#define FEC_IEVENT;		0x004 /* Interrupt even reg */
-#define FEC_IMASK;		0x008 /* Interrupt mask reg */
-#define FEC_IVEC;		0x00c /* Interrupt vec status reg */
-#define FEC_R_DES_ACTIVE;	0x010 /* Receive descriptor reg */
-#define FEC_X_DES_ACTIVE;	0x01c /* Transmit descriptor reg */
+#define FEC_ECNTRL		0x000 /* Ethernet control reg */
+#define FEC_IEVENT		0x004 /* Interrupt even reg */
+#define FEC_IMASK		0x008 /* Interrupt mask reg */
+#define FEC_IVEC		0x00c /* Interrupt vec status reg */
+#define FEC_R_DES_ACTIVE	0x010 /* Receive descriptor reg */
+#define FEC_X_DES_ACTIVE	0x014 /* Transmit descriptor reg */
 #define FEC_MII_DATA		0x040 /* MII manage frame reg */
 #define FEC_MII_SPEED		0x044 /* MII speed control reg */
 #define FEC_R_BOUND		0x08c /* FIFO receive bound reg */
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index cc786333d95..c40113f5896 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -309,6 +309,7 @@ static int mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
 	struct bcom_fec_bd *bd;
+	unsigned long flags;
 
 	if (bcom_queue_full(priv->tx_dmatsk)) {
 		if (net_ratelimit())
@@ -316,7 +317,7 @@ static int mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		return NETDEV_TX_BUSY;
 	}
 
-	spin_lock_irq(&priv->lock);
+	spin_lock_irqsave(&priv->lock, flags);
 	dev->trans_start = jiffies;
 
 	bd = (struct bcom_fec_bd *)
@@ -332,7 +333,7 @@ static int mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		netif_stop_queue(dev);
 	}
 
-	spin_unlock_irq(&priv->lock);
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return NETDEV_TX_OK;
 }
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 1094d292630..3b4e0766c7b 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3514,11 +3514,13 @@ static irqreturn_t nv_nic_irq(int foo, void *data)
 	nv_msi_workaround(np);
 
 #ifdef CONFIG_FORCEDETH_NAPI
-	napi_schedule(&np->napi);
-
-	/* Disable furthur irq's
-	   (msix not enabled with napi) */
-	writel(0, base + NvRegIrqMask);
+	if (napi_schedule_prep(&np->napi)) {
+		/*
+		 * Disable further irq's (msix not enabled with napi)
+		 */
+		writel(0, base + NvRegIrqMask);
+		__napi_schedule(&np->napi);
+	}
 
 #else
 	do
@@ -3615,12 +3617,13 @@ static irqreturn_t nv_nic_irq_optimized(int foo, void *data)
 	nv_msi_workaround(np);
 
 #ifdef CONFIG_FORCEDETH_NAPI
-	napi_schedule(&np->napi);
-
-	/* Disable furthur irq's
-	   (msix not enabled with napi) */
-	writel(0, base + NvRegIrqMask);
-
+	if (napi_schedule_prep(&np->napi)) {
+		/*
+		 * Disable further irq's (msix not enabled with napi)
+		 */
+		writel(0, base + NvRegIrqMask);
+		__napi_schedule(&np->napi);
+	}
 #else
 	do
 	{
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index b892c3ad9a7..2bc2d2b2064 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -754,17 +754,16 @@ static int fs_init_phy(struct net_device *dev)
 	fep->oldlink = 0;
 	fep->oldspeed = 0;
 	fep->oldduplex = -1;
-	if(fep->fpi->phy_node)
-		phydev = of_phy_connect(dev, fep->fpi->phy_node,
-					&fs_adjust_link, 0,
-					PHY_INTERFACE_MODE_MII);
-	else {
-		printk("No phy bus ID specified in BSP code\n");
-		return -EINVAL;
+
+	phydev = of_phy_connect(dev, fep->fpi->phy_node, &fs_adjust_link, 0,
+				PHY_INTERFACE_MODE_MII);
+	if (!phydev) {
+		phydev = of_phy_connect_fixed_link(dev, &fs_adjust_link,
+						   PHY_INTERFACE_MODE_MII);
 	}
-	if (IS_ERR(phydev)) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-		return PTR_ERR(phydev);
+	if (!phydev) {
+		dev_err(&dev->dev, "Could not attach to PHY\n");
+		return -ENODEV;
 	}
 
 	fep->phydev = phydev;
@@ -1005,6 +1004,7 @@ static int __devinit fs_enet_probe(struct of_device *ofdev,
 		goto out_free_fpi;
 	}
 
+	SET_NETDEV_DEV(ndev, &ofdev->dev);
 	dev_set_drvdata(&ofdev->dev, ndev);
 
 	fep = netdev_priv(ndev);
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
index 3af581303ca..d167090248e 100644
--- a/drivers/net/fsl_pq_mdio.c
+++ b/drivers/net/fsl_pq_mdio.c
@@ -188,7 +188,7 @@ static int fsl_pq_mdio_find_free(struct mii_bus *new_bus)
 }
 
 
-#ifdef CONFIG_GIANFAR
+#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
 static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs)
 {
 	struct gfar __iomem *enet_regs;
@@ -206,7 +206,7 @@ static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs)
 #endif
 
 
-#ifdef CONFIG_UCC_GETH
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
 static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
 {
 	struct device_node *np = NULL;
@@ -291,7 +291,7 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev,
 	if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
 			of_device_is_compatible(np, "fsl,gianfar-tbi") ||
 			of_device_is_compatible(np, "gianfar")) {
-#ifdef CONFIG_GIANFAR
+#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
 		tbipa = get_gfar_tbipa(regs);
 #else
 		err = -ENODEV;
@@ -299,7 +299,7 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev,
 #endif
 	} else if (of_device_is_compatible(np, "fsl,ucc-mdio") ||
 			of_device_is_compatible(np, "ucc_geth_phy")) {
-#ifdef CONFIG_UCC_GETH
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
 		u32 id;
 		static u32 mii_mng_master;
 
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 4ae1d259fce..a00ec639c38 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -156,6 +156,8 @@ static const struct net_device_ops gfar_netdev_ops = {
 	.ndo_tx_timeout = gfar_timeout,
 	.ndo_do_ioctl = gfar_ioctl,
 	.ndo_vlan_rx_register = gfar_vlan_rx_register,
+	.ndo_set_mac_address = eth_mac_addr,
+	.ndo_validate_addr = eth_validate_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = gfar_netpoll,
 #endif
@@ -262,15 +264,6 @@ static int gfar_of_init(struct net_device *dev)
 		priv->device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
 
 	priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
-	if (!priv->phy_node) {
-		u32 *fixed_link;
-
-		fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL);
-		if (!fixed_link) {
-			err = -ENODEV;
-			goto err_out;
-		}
-	}
 
 	/* Find the TBI PHY.  If it's not there, we don't support SGMII */
 	priv->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
@@ -498,6 +491,7 @@ static int gfar_remove(struct of_device *ofdev)
 
 	dev_set_drvdata(&ofdev->dev, NULL);
 
+	unregister_netdev(priv->ndev);
 	iounmap(priv->regs);
 	free_netdev(priv->ndev);
 
@@ -657,13 +651,14 @@ static int init_phy(struct net_device *dev)
 
 	interface = gfar_get_interface(dev);
 
-	if (priv->phy_node) {
-		priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link,
-					      0, interface);
-		if (!priv->phydev) {
-			dev_err(&dev->dev, "error: Could not attach to PHY\n");
-			return -ENODEV;
-		}
+	priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link, 0,
+				      interface);
+	if (!priv->phydev)
+		priv->phydev = of_phy_connect_fixed_link(dev, &adjust_link,
+							 interface);
+	if (!priv->phydev) {
+		dev_err(&dev->dev, "could not attach to PHY\n");
+		return -ENODEV;
 	}
 
 	if (interface == PHY_INTERFACE_MODE_SGMII)
@@ -942,6 +937,7 @@ int startup_gfar(struct net_device *dev)
 	struct gfar __iomem *regs = priv->regs;
 	int err = 0;
 	u32 rctrl = 0;
+	u32 tctrl = 0;
 	u32 attrs = 0;
 
 	gfar_write(&regs->imask, IMASK_INIT_CLEAR);
@@ -1117,11 +1113,19 @@ int startup_gfar(struct net_device *dev)
 		rctrl |= RCTRL_PADDING(priv->padding);
 	}
 
+	/* keep vlan related bits if it's enabled */
+	if (priv->vlgrp) {
+		rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
+		tctrl |= TCTRL_VLINS;
+	}
+
 	/* Init rctrl based on our settings */
 	gfar_write(&priv->regs->rctrl, rctrl);
 
 	if (dev->features & NETIF_F_IP_CSUM)
-		gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM);
+		tctrl |= TCTRL_INIT_CSUM;
+
+	gfar_write(&priv->regs->tctrl, tctrl);
 
 	/* Set the extraction length and index */
 	attrs = ATTRELI_EL(priv->rx_stash_size) |
@@ -1456,7 +1460,6 @@ static void gfar_vlan_rx_register(struct net_device *dev,
 
 		/* Enable VLAN tag extraction */
 		tempval = gfar_read(&priv->regs->rctrl);
-		tempval |= RCTRL_VLEX;
 		tempval |= (RCTRL_VLEX | RCTRL_PRSDEP_INIT);
 		gfar_write(&priv->regs->rctrl, tempval);
 	} else {
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index dbf06e9313c..2234118eedb 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -366,9 +366,8 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
 		return -EINVAL;
 	}
 
-	priv->rxic = mk_ic_value(
-		gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs),
-		cvals->rx_max_coalesced_frames);
+	priv->rxic = mk_ic_value(cvals->rx_max_coalesced_frames,
+		gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs));
 
 	/* Set up tx coalescing */
 	if ((cvals->tx_coalesce_usecs == 0) ||
@@ -390,9 +389,8 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
 		return -EINVAL;
 	}
 
-	priv->txic = mk_ic_value(
-		gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs),
-		cvals->tx_max_coalesced_frames);
+	priv->txic = mk_ic_value(cvals->tx_max_coalesced_frames,
+		gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs));
 
 	gfar_write(&priv->regs->rxic, 0);
 	if (priv->rxcoalescing)
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 9d5b62cb30f..d62378cbc14 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -173,8 +173,8 @@ static int tx_params[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 
 static const char version[] __devinitconst =
 KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE "  Written by Donald Becker\n"
-KERN_INFO "   Some modifications by Eric kasten <kasten@nscl.msu.edu>\n"
-KERN_INFO "   Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n";
+"   Some modifications by Eric kasten <kasten@nscl.msu.edu>\n"
+"   Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n";
 
 
 /* IP_MF appears to be only defined in <netinet/ip.h>, however,
@@ -1080,11 +1080,14 @@ static void hamachi_tx_timeout(struct net_device *dev)
 	{
 		printk(KERN_DEBUG "  Rx ring %p: ", hmp->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++)
-			printk(" %8.8x", le32_to_cpu(hmp->rx_ring[i].status_n_length));
-		printk("\n"KERN_DEBUG"  Tx ring %p: ", hmp->tx_ring);
+			printk(KERN_CONT " %8.8x",
+			       le32_to_cpu(hmp->rx_ring[i].status_n_length));
+		printk(KERN_CONT "\n");
+		printk(KERN_DEBUG"  Tx ring %p: ", hmp->tx_ring);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(" %4.4x", le32_to_cpu(hmp->tx_ring[i].status_n_length));
-		printk("\n");
+			printk(KERN_CONT " %4.4x",
+			       le32_to_cpu(hmp->tx_ring[i].status_n_length));
+		printk(KERN_CONT "\n");
 	}
 
 	/* Reinit the hardware and make sure the Rx and Tx processes
@@ -1753,13 +1756,13 @@ static int hamachi_close(struct net_device *dev)
 
 #ifdef __i386__
 	if (hamachi_debug > 2) {
-		printk("\n"KERN_DEBUG"  Tx ring at %8.8x:\n",
+		printk(KERN_DEBUG "  Tx ring at %8.8x:\n",
 			   (int)hmp->tx_ring_dma);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(" %c #%d desc. %8.8x %8.8x.\n",
+			printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x.\n",
 				   readl(ioaddr + TxCurPtr) == (long)&hmp->tx_ring[i] ? '>' : ' ',
 				   i, hmp->tx_ring[i].status_n_length, hmp->tx_ring[i].addr);
-		printk("\n"KERN_DEBUG "  Rx ring %8.8x:\n",
+		printk(KERN_DEBUG "  Rx ring %8.8x:\n",
 			   (int)hmp->rx_ring_dma);
 		for (i = 0; i < RX_RING_SIZE; i++) {
 			printk(KERN_DEBUG " %c #%d desc. %4.4x %8.8x\n",
@@ -1770,7 +1773,7 @@ static int hamachi_close(struct net_device *dev)
 					u16 *addr = (u16 *)
 						hmp->rx_skbuff[i]->data;
 					int j;
-
+					printk(KERN_DEBUG "Addr: ");
 					for (j = 0; j < 0x50; j++)
 						printk(" %4.4x", addr[j]);
 					printk("\n");
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 155160052c8..981ab530e9a 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -3,7 +3,7 @@
  *		devices like TTY. It interfaces between a raw TTY and the
  *		kernel's AX.25 protocol layers.
  *
- * Authors:	Andreas Könsgen <ajk@iehk.rwth-aachen.de>
+ * Authors:	Andreas Könsgen <ajk@comnets.uni-bremen.de>
  *              Ralf Baechle DL5RB <ralf@linux-mips.org>
  *
  * Quite a lot of stuff "stolen" by Joerg Reuter from slip.c, written by
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 5e4b7afd068..352703255bb 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -68,7 +68,7 @@ static const char paranoia_str[] = KERN_ERR
 
 static const char bc_drvname[] = "baycom_epp";
 static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
 
 /* --------------------------------------------------------------------- */
 
diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c
index 2e6fc4dc74b..5f5af9a606f 100644
--- a/drivers/net/hamradio/baycom_par.c
+++ b/drivers/net/hamradio/baycom_par.c
@@ -102,7 +102,7 @@
 
 static const char bc_drvname[] = "baycom_par";
 static const char bc_drvinfo[] = KERN_INFO "baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n";
 
 /* --------------------------------------------------------------------- */
 
diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index b6a816e60c0..aa4488e871b 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -91,7 +91,7 @@
 
 static const char bc_drvname[] = "baycom_ser_fdx";
 static const char bc_drvinfo[] = KERN_INFO "baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
 
 /* --------------------------------------------------------------------- */
 
diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c
index 3bcc57acbe6..88c59359602 100644
--- a/drivers/net/hamradio/baycom_ser_hdx.c
+++ b/drivers/net/hamradio/baycom_ser_hdx.c
@@ -79,7 +79,7 @@
 
 static const char bc_drvname[] = "baycom_ser_hdx";
 static const char bc_drvinfo[] = KERN_INFO "baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
 
 /* --------------------------------------------------------------------- */
 
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index beb84213b67..f0f89080371 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1305,6 +1305,8 @@ static int emac_close(struct net_device *ndev)
 
 	free_irq(dev->emac_irq, dev);
 
+	netif_carrier_off(ndev);
+
 	return 0;
 }
 
diff --git a/drivers/net/ibm_newemac/rgmii.c b/drivers/net/ibm_newemac/rgmii.c
index 1d5379de690..8d76cb89dbd 100644
--- a/drivers/net/ibm_newemac/rgmii.c
+++ b/drivers/net/ibm_newemac/rgmii.c
@@ -188,11 +188,12 @@ void rgmii_put_mdio(struct of_device *ofdev, int input)
 void rgmii_detach(struct of_device *ofdev, int input)
 {
 	struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
-	struct rgmii_regs __iomem *p = dev->base;
-
-	mutex_lock(&dev->lock);
+	struct rgmii_regs __iomem *p;
 
 	BUG_ON(!dev || dev->users == 0);
+	p = dev->base;
+
+	mutex_lock(&dev->lock);
 
 	RGMII_DBG(dev, "detach(%d)" NL, input);
 
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index efd9be21488..ac28dd5a4fd 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -190,6 +190,10 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
 		phy->ops.write_reg          = igb_write_phy_reg_igp;
 	}
 
+	/* set lan id */
+	hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >>
+	               E1000_STATUS_FUNC_SHIFT;
+
 	/* Set phy->phy_addr and phy->id. */
 	ret_val = igb_get_phy_id_82575(hw);
 	if (ret_val)
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index ea17319624a..adb09d32625 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -127,14 +127,48 @@ static void igb_restore_vlan(struct igb_adapter *);
 static void igb_ping_all_vfs(struct igb_adapter *);
 static void igb_msg_task(struct igb_adapter *);
 static int igb_rcv_msg_from_vf(struct igb_adapter *, u32);
-static inline void igb_set_rah_pool(struct e1000_hw *, int , int);
 static void igb_set_mc_list_pools(struct igb_adapter *, int, u16);
 static void igb_vmm_control(struct igb_adapter *);
-static inline void igb_set_vmolr(struct e1000_hw *, int);
-static inline int igb_set_vf_rlpml(struct igb_adapter *, int, int);
 static int igb_set_vf_mac(struct igb_adapter *adapter, int, unsigned char *);
 static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
 
+static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn)
+{
+	u32 reg_data;
+
+	reg_data = rd32(E1000_VMOLR(vfn));
+	reg_data |= E1000_VMOLR_BAM |	 /* Accept broadcast */
+	            E1000_VMOLR_ROPE |   /* Accept packets matched in UTA */
+	            E1000_VMOLR_ROMPE |  /* Accept packets matched in MTA */
+	            E1000_VMOLR_AUPE |   /* Accept untagged packets */
+	            E1000_VMOLR_STRVLAN; /* Strip vlan tags */
+	wr32(E1000_VMOLR(vfn), reg_data);
+}
+
+static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
+                                 int vfn)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 vmolr;
+
+	vmolr = rd32(E1000_VMOLR(vfn));
+	vmolr &= ~E1000_VMOLR_RLPML_MASK;
+	vmolr |= size | E1000_VMOLR_LPE;
+	wr32(E1000_VMOLR(vfn), vmolr);
+
+	return 0;
+}
+
+static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry)
+{
+	u32 reg_data;
+
+	reg_data = rd32(E1000_RAH(entry));
+	reg_data &= ~E1000_RAH_POOL_MASK;
+	reg_data |= E1000_RAH_POOL_1 << pool;;
+	wr32(E1000_RAH(entry), reg_data);
+}
+
 #ifdef CONFIG_PM
 static int igb_suspend(struct pci_dev *, pm_message_t);
 static int igb_resume(struct pci_dev *);
@@ -4549,11 +4583,12 @@ static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring,
 		cleaned = true;
 		cleaned_count++;
 
+		/* this is the fast path for the non-packet split case */
 		if (!adapter->rx_ps_hdr_size) {
 			pci_unmap_single(pdev, buffer_info->dma,
-					 adapter->rx_buffer_len +
-					   NET_IP_ALIGN,
+					 adapter->rx_buffer_len,
 					 PCI_DMA_FROMDEVICE);
+			buffer_info->dma = 0;
 			skb_put(skb, length);
 			goto send_up;
 		}
@@ -4570,8 +4605,9 @@ static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring,
 
 		if (!skb_shinfo(skb)->nr_frags) {
 			pci_unmap_single(pdev, buffer_info->dma,
-					 adapter->rx_ps_hdr_size + NET_IP_ALIGN,
+					 adapter->rx_ps_hdr_size,
 					 PCI_DMA_FROMDEVICE);
+			buffer_info->dma = 0;
 			skb_put(skb, hlen);
 		}
 
@@ -4713,7 +4749,6 @@ static void igb_alloc_rx_buffers_adv(struct igb_ring *rx_ring,
 		bufsz = adapter->rx_ps_hdr_size;
 	else
 		bufsz = adapter->rx_buffer_len;
-	bufsz += NET_IP_ALIGN;
 
 	while (cleaned_count--) {
 		rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
@@ -4737,7 +4772,7 @@ static void igb_alloc_rx_buffers_adv(struct igb_ring *rx_ring,
 		}
 
 		if (!buffer_info->skb) {
-			skb = netdev_alloc_skb(netdev, bufsz);
+			skb = netdev_alloc_skb(netdev, bufsz + NET_IP_ALIGN);
 			if (!skb) {
 				adapter->alloc_rx_buff_failed++;
 				goto no_buffers;
@@ -5338,6 +5373,9 @@ static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev,
 
 	netif_device_detach(netdev);
 
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
 	if (netif_running(netdev))
 		igb_down(adapter);
 	pci_disable_device(pdev);
@@ -5414,43 +5452,6 @@ static void igb_io_resume(struct pci_dev *pdev)
 	igb_get_hw_control(adapter);
 }
 
-static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn)
-{
-	u32 reg_data;
-
-	reg_data = rd32(E1000_VMOLR(vfn));
-	reg_data |= E1000_VMOLR_BAM |	 /* Accept broadcast */
-	            E1000_VMOLR_ROPE |   /* Accept packets matched in UTA */
-	            E1000_VMOLR_ROMPE |  /* Accept packets matched in MTA */
-	            E1000_VMOLR_AUPE |   /* Accept untagged packets */
-	            E1000_VMOLR_STRVLAN; /* Strip vlan tags */
-	wr32(E1000_VMOLR(vfn), reg_data);
-}
-
-static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
-                                 int vfn)
-{
-	struct e1000_hw *hw = &adapter->hw;
-	u32 vmolr;
-
-	vmolr = rd32(E1000_VMOLR(vfn));
-	vmolr &= ~E1000_VMOLR_RLPML_MASK;
-	vmolr |= size | E1000_VMOLR_LPE;
-	wr32(E1000_VMOLR(vfn), vmolr);
-
-	return 0;
-}
-
-static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry)
-{
-	u32 reg_data;
-
-	reg_data = rd32(E1000_RAH(entry));
-	reg_data &= ~E1000_RAH_POOL_MASK;
-	reg_data |= E1000_RAH_POOL_1 << pool;;
-	wr32(E1000_RAH(entry), reg_data);
-}
-
 static void igb_set_mc_list_pools(struct igb_adapter *adapter,
 				  int entry_count, u16 total_rar_filters)
 {
diff --git a/drivers/net/igbvf/vf.c b/drivers/net/igbvf/vf.c
index 2a4faf9ade6..a9a61efa964 100644
--- a/drivers/net/igbvf/vf.c
+++ b/drivers/net/igbvf/vf.c
@@ -274,6 +274,8 @@ static s32 e1000_set_vfta_vf(struct e1000_hw *hw, u16 vid, bool set)
 
 	err = mbx->ops.read_posted(hw, msgbuf, 2);
 
+	msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
+
 	/* if nacked the vlan was rejected */
 	if (!err && (msgbuf[0] == (E1000_VF_SET_VLAN | E1000_VT_MSGTYPE_NACK)))
 		err = -E1000_ERR_MAC_INIT;
@@ -317,6 +319,8 @@ static void e1000_rar_set_vf(struct e1000_hw *hw, u8 * addr, u32 index)
 	if (!ret_val)
 		ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
 
+	msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
+
 	/* if nacked the address was rejected, use "perm_addr" */
 	if (!ret_val &&
 	    (msgbuf[0] == (E1000_VF_SET_MAC_ADDR | E1000_VT_MSGTYPE_NACK)))
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
index c4361d46659..ee1cff5c9b2 100644
--- a/drivers/net/irda/au1k_ir.c
+++ b/drivers/net/irda/au1k_ir.c
@@ -23,7 +23,6 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/netdevice.h>
-#include <linux/etherdevice.h>
 #include <linux/slab.h>
 #include <linux/rtnetlink.h>
 #include <linux/interrupt.h>
@@ -205,9 +204,6 @@ static const struct net_device_ops au1k_irda_netdev_ops = {
 	.ndo_start_xmit		= au1k_irda_hard_xmit,
 	.ndo_tx_timeout		= au1k_tx_timeout,
 	.ndo_do_ioctl		= au1k_irda_ioctl,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
 };
 
 static int au1k_irda_net_init(struct net_device *dev)
diff --git a/drivers/net/irda/bfin_sir.c b/drivers/net/irda/bfin_sir.c
index f3eed6a8fba..911c082cee5 100644
--- a/drivers/net/irda/bfin_sir.c
+++ b/drivers/net/irda/bfin_sir.c
@@ -677,6 +677,14 @@ static int bfin_sir_init_iobuf(iobuff_t *io, int size)
 	return 0;
 }
 
+static const struct net_device_ops bfin_sir_ndo = {
+	.ndo_open		= bfin_sir_open,
+	.ndo_stop		= bfin_sir_stop,
+	.ndo_start_xmit		= bfin_sir_hard_xmit,
+	.ndo_do_ioctl		= bfin_sir_ioctl,
+	.ndo_get_stats		= bfin_sir_stats,
+};
+
 static int __devinit bfin_sir_probe(struct platform_device *pdev)
 {
 	struct net_device *dev;
@@ -718,12 +726,8 @@ static int __devinit bfin_sir_probe(struct platform_device *pdev)
 	if (err)
 		goto err_mem_3;
 
-	dev->hard_start_xmit = bfin_sir_hard_xmit;
-	dev->open            = bfin_sir_open;
-	dev->stop            = bfin_sir_stop;
-	dev->do_ioctl        = bfin_sir_ioctl;
-	dev->get_stats       = bfin_sir_stats;
-	dev->irq             = sir_port->irq;
+	dev->netdev_ops = &bfin_sir_ndo;
+	dev->irq = sir_port->irq;
 
 	irda_init_max_qos_capabilies(&self->qos);
 
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index d53aa958213..20f9bc62668 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -31,7 +31,6 @@
 #include <linux/tty.h>
 #include <linux/init.h>
 #include <asm/uaccess.h>
-#include <linux/smp_lock.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 3376a4f39e0..77d10edefd2 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -803,9 +803,6 @@ static const struct net_device_ops pxa_irda_netdev_ops = {
 	.ndo_stop		= pxa_irda_stop,
 	.ndo_start_xmit		= pxa_irda_hard_xmit,
 	.ndo_do_ioctl		= pxa_irda_ioctl,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
 };
 
 static int pxa_irda_probe(struct platform_device *pdev)
@@ -830,6 +827,7 @@ static int pxa_irda_probe(struct platform_device *pdev)
 	if (!dev)
 		goto err_mem_3;
 
+	SET_NETDEV_DEV(dev, &pdev->dev);
 	si = netdev_priv(dev);
 	si->dev = &pdev->dev;
 	si->pdata = pdev->dev.platform_data;
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index 2aeb2e6aec1..b039cb081e9 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -24,7 +24,6 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/netdevice.h>
-#include <linux/etherdevice.h>
 #include <linux/slab.h>
 #include <linux/rtnetlink.h>
 #include <linux/interrupt.h>
@@ -881,9 +880,6 @@ static const struct net_device_ops sa1100_irda_netdev_ops = {
 	.ndo_stop		= sa1100_irda_stop,
 	.ndo_start_xmit		= sa1100_irda_hard_xmit,
 	.ndo_do_ioctl		= sa1100_irda_ioctl,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
 };
 
 static int sa1100_irda_probe(struct platform_device *pdev)
diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c
index d0883835b0c..fe4f2b2bff9 100644
--- a/drivers/net/irda/w83977af_ir.c
+++ b/drivers/net/irda/w83977af_ir.c
@@ -115,7 +115,7 @@ static int __init w83977af_init(void)
 
 	IRDA_DEBUG(0, "%s()\n", __func__ );
 
-	for (i=0; (io[i] < 2000) && (i < ARRAY_SIZE(dev_self)); i++) {
+	for (i=0; i < ARRAY_SIZE(dev_self) && io[i] < 2000; i++) {
 		if (w83977af_open(i, io[i], irq[i], dma[i]) == 0)
 			return 0;
 	}
diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c
index 73585fd8f29..d12377b8435 100644
--- a/drivers/net/isa-skeleton.c
+++ b/drivers/net/isa-skeleton.c
@@ -430,7 +430,8 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
 	 * hardware interrupt handler.  Queue flow control is
 	 * thus managed under this lock as well.
 	 */
-	spin_lock_irq(&np->lock);
+	unsigned long flags;
+	spin_lock_irqsave(&np->lock, flags);
 
 	add_to_tx_ring(np, skb, length);
 	dev->trans_start = jiffies;
@@ -446,7 +447,7 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
 	 * is when the transmit statistics are updated.
 	 */
 
-	spin_unlock_irq(&np->lock);
+	spin_unlock_irqrestore(&np->lock, flags);
 #else
 	/* This is the case for older hardware which takes
 	 * a single transmit buffer at a time, and it is
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index cd22323cfd2..2c4dc8221dc 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -96,6 +96,8 @@
 #define IXGBE_TX_FLAGS_VLAN_PRIO_MASK   0x0000e000
 #define IXGBE_TX_FLAGS_VLAN_SHIFT	16
 
+#define IXGBE_MAX_RSC_INT_RATE          162760
+
 /* wrapper around a pointer to a socket buffer,
  * so a DMA handle can be stored along with the buffer */
 struct ixgbe_tx_buffer {
@@ -134,6 +136,8 @@ struct ixgbe_ring {
 
 	u8 queue_index; /* needed for multiqueue queue management */
 
+#define IXGBE_RING_RX_PS_ENABLED                (u8)(1)
+	u8 flags;			/* per ring feature flags */
 	u16 head;
 	u16 tail;
 
@@ -327,6 +331,7 @@ struct ixgbe_adapter {
 #define IXGBE_FLAG_IN_SFP_MOD_TASK              (u32)(1 << 25)
 #define IXGBE_FLAG_FDIR_HASH_CAPABLE            (u32)(1 << 26)
 #define IXGBE_FLAG_FDIR_PERFECT_CAPABLE         (u32)(1 << 27)
+#define IXGBE_FLAG_FCOE_CAPABLE                 (u32)(1 << 28)
 #define IXGBE_FLAG_FCOE_ENABLED                 (u32)(1 << 29)
 
 	u32 flags2;
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index b9923047ce1..522c03bc1da 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -50,6 +50,51 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
                                        u8 *eeprom_data);
 
 /**
+ *  ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
+ *  @hw: pointer to the HW structure
+ *
+ *  The defaults for 82598 should be in the range of 50us to 50ms,
+ *  however the hardware default for these parts is 500us to 1ms which is less
+ *  than the 10ms recommended by the pci-e spec.  To address this we need to
+ *  increase the value to either 10ms to 250ms for capability version 1 config,
+ *  or 16ms to 55ms for version 2.
+ **/
+void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
+{
+	struct ixgbe_adapter *adapter = hw->back;
+	u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
+	u16 pcie_devctl2;
+
+	/* only take action if timeout value is defaulted to 0 */
+	if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
+		goto out;
+
+	/*
+	 * if capababilities version is type 1 we can write the
+	 * timeout of 10ms to 250ms through the GCR register
+	 */
+	if (!(gcr & IXGBE_GCR_CAP_VER2)) {
+		gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
+		goto out;
+	}
+
+	/*
+	 * for version 2 capabilities we need to write the config space
+	 * directly in order to set the completion timeout value for
+	 * 16ms to 55ms
+	 */
+	pci_read_config_word(adapter->pdev,
+	                     IXGBE_PCI_DEVICE_CONTROL2, &pcie_devctl2);
+	pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
+	pci_write_config_word(adapter->pdev,
+	                      IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
+out:
+	/* disable completion timeout resend */
+	gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
+	IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
+}
+
+/**
  *  ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count
  *  @hw: pointer to hardware structure
  *
@@ -153,6 +198,26 @@ out:
 }
 
 /**
+ *  ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware using the generic start_hw function.
+ *  Then set pcie completion timeout
+ **/
+s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
+{
+	s32 ret_val = 0;
+
+	ret_val = ixgbe_start_hw_generic(hw);
+
+	/* set the completion timeout for interface */
+	if (ret_val == 0)
+		ixgbe_set_pcie_completion_timeout(hw);
+
+	return ret_val;
+}
+
+/**
  *  ixgbe_get_link_capabilities_82598 - Determines link capabilities
  *  @hw: pointer to hardware structure
  *  @speed: pointer to link speed
@@ -1085,7 +1150,7 @@ out:
 static struct ixgbe_mac_operations mac_ops_82598 = {
 	.init_hw		= &ixgbe_init_hw_generic,
 	.reset_hw		= &ixgbe_reset_hw_82598,
-	.start_hw		= &ixgbe_start_hw_generic,
+	.start_hw		= &ixgbe_start_hw_82598,
 	.clear_hw_cntrs		= &ixgbe_clear_hw_cntrs_generic,
 	.get_media_type		= &ixgbe_get_media_type_82598,
 	.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index d56890f5c9d..1c726573290 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -106,8 +106,6 @@ static u8 ixgbe_dcbnl_get_state(struct net_device *netdev)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 
-	DPRINTK(DRV, INFO, "Get DCB Admin Mode.\n");
-
 	return !!(adapter->flags & IXGBE_FLAG_DCB_ENABLED);
 }
 
@@ -116,8 +114,6 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 	u8 err = 0;
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 
-	DPRINTK(DRV, INFO, "Set DCB Admin Mode.\n");
-
 	if (state > 0) {
 		/* Turn on DCB */
 		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
@@ -138,7 +134,23 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 			adapter->hw.fc.requested_mode = ixgbe_fc_none;
 		}
 		adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
+		if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+			adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+			adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+		}
 		adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
+#ifdef IXGBE_FCOE
+		/* Turn on FCoE offload */
+		if ((adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) &&
+		    (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))) {
+			adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
+			adapter->ring_feature[RING_F_FCOE].indices =
+				IXGBE_FCRETA_SIZE;
+			netdev->features |= NETIF_F_FCOE_CRC;
+			netdev->features |= NETIF_F_FSO;
+			netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
+		}
+#endif /* IXGBE_FCOE */
 		ixgbe_init_interrupt_scheme(adapter);
 		if (netif_running(netdev))
 			netdev->netdev_ops->ndo_open(netdev);
@@ -154,6 +166,20 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 			adapter->dcb_cfg.pfc_mode_enable = false;
 			adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
 			adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
+			if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+				adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+
+#ifdef IXGBE_FCOE
+			/* Turn off FCoE offload */
+			if (adapter->flags & (IXGBE_FLAG_FCOE_CAPABLE |
+			     IXGBE_FLAG_FCOE_ENABLED)) {
+				adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+				adapter->ring_feature[RING_F_FCOE].indices = 0;
+				netdev->features &= ~NETIF_F_FCOE_CRC;
+				netdev->features &= ~NETIF_F_FSO;
+				netdev->fcoe_ddp_xid = 0;
+			}
+#endif /* IXGBE_FCOE */
 			ixgbe_init_interrupt_scheme(adapter);
 			if (netif_running(netdev))
 				netdev->netdev_ops->ndo_open(netdev);
@@ -169,6 +195,8 @@ static void ixgbe_dcbnl_get_perm_hw_addr(struct net_device *netdev,
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	int i, j;
 
+	memset(perm_addr, 0xff, MAX_ADDR_LEN);
+
 	for (i = 0; i < netdev->addr_len; i++)
 		perm_addr[i] = adapter->hw.mac.perm_addr[i];
 
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 86f4f3e36f2..dff8dfac7ed 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -139,7 +139,7 @@ static int ixgbe_get_settings(struct net_device *netdev,
 	ecmd->autoneg = AUTONEG_ENABLE;
 	ecmd->transceiver = XCVR_EXTERNAL;
 	if ((hw->phy.media_type == ixgbe_media_type_copper) ||
-	    (hw->mac.type == ixgbe_mac_82599EB)) {
+	    (hw->phy.multispeed_fiber)) {
 		ecmd->supported |= (SUPPORTED_1000baseT_Full |
 		                    SUPPORTED_Autoneg);
 
@@ -217,7 +217,7 @@ static int ixgbe_set_settings(struct net_device *netdev,
 	s32 err = 0;
 
 	if ((hw->phy.media_type == ixgbe_media_type_copper) ||
-	    (hw->mac.type == ixgbe_mac_82599EB)) {
+	    (hw->phy.multispeed_fiber)) {
 		/* 10000/copper and 1000/copper must autoneg
 		 * this function does not support any duplex forcing, but can
 		 * limit the advertising of the adapter to only 10000 or 1000 */
@@ -245,6 +245,7 @@ static int ixgbe_set_settings(struct net_device *netdev,
 	} else {
 		/* in this case we currently only support 10Gb/FULL */
 		if ((ecmd->autoneg == AUTONEG_ENABLE) ||
+		    (ecmd->advertising != ADVERTISED_10000baseT_Full) ||
 		    (ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
 			return -EINVAL;
 	}
@@ -1829,7 +1830,6 @@ static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
 		break;
 	default:
 		wol->supported = 0;
-		retval = 0;
 	}
 
 	return retval;
@@ -1948,6 +1948,7 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
                               struct ethtool_coalesce *ec)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_q_vector *q_vector;
 	int i;
 
 	if (ec->tx_max_coalesced_frames_irq)
@@ -1975,18 +1976,31 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 		 * any other value means disable eitr, which is best
 		 * served by setting the interrupt rate very high
 		 */
-		adapter->eitr_param = IXGBE_MAX_INT_RATE;
+		if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
+			adapter->eitr_param = IXGBE_MAX_RSC_INT_RATE;
+		else
+			adapter->eitr_param = IXGBE_MAX_INT_RATE;
 		adapter->itr_setting = 0;
 	}
 
-	for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
-		struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
-		if (q_vector->txr_count && !q_vector->rxr_count)
-			/* tx vector gets half the rate */
-			q_vector->eitr = (adapter->eitr_param >> 1);
-		else
-			/* rx only or mixed */
-			q_vector->eitr = adapter->eitr_param;
+	/* MSI/MSIx Interrupt Mode */
+	if (adapter->flags &
+	    (IXGBE_FLAG_MSIX_ENABLED | IXGBE_FLAG_MSI_ENABLED)) {
+		int num_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+		for (i = 0; i < num_vectors; i++) {
+			q_vector = adapter->q_vector[i];
+			if (q_vector->txr_count && !q_vector->rxr_count)
+				/* tx vector gets half the rate */
+				q_vector->eitr = (adapter->eitr_param >> 1);
+			else
+				/* rx only or mixed */
+				q_vector->eitr = adapter->eitr_param;
+			ixgbe_write_eitr(q_vector);
+		}
+	/* Legacy Interrupt Mode */
+	} else {
+		q_vector = adapter->q_vector[0];
+		q_vector->eitr = adapter->eitr_param;
 		ixgbe_write_eitr(q_vector);
 	}
 
@@ -1999,13 +2013,13 @@ static int ixgbe_set_flags(struct net_device *netdev, u32 data)
 
 	ethtool_op_set_flags(netdev, data);
 
-	if (!(adapter->flags & IXGBE_FLAG2_RSC_CAPABLE))
+	if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
 		return 0;
 
 	/* if state changes we need to update adapter->flags and reset */
 	if ((!!(data & ETH_FLAG_LRO)) != 
-	    (!!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED))) {
-		adapter->flags ^= IXGBE_FLAG2_RSC_ENABLED;
+	    (!!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))) {
+		adapter->flags2 ^= IXGBE_FLAG2_RSC_ENABLED;
 		if (netif_running(netdev))
 			ixgbe_reinit_locked(adapter);
 		else
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index fa9f24e2368..28cf104e36c 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -336,7 +336,7 @@ int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
 		/* return 0 to bypass going to ULD for DDPed data */
 		if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_DDP)
 			rc = 0;
-		else
+		else if (ddp->len)
 			rc = ddp->len;
 	}
 
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index e756e220db3..77b0381a2b5 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -34,6 +34,7 @@
 #include <linux/in.h>
 #include <linux/ip.h>
 #include <linux/tcp.h>
+#include <linux/pkt_sched.h>
 #include <linux/ipv6.h>
 #include <net/checksum.h>
 #include <net/ip6_checksum.h>
@@ -491,12 +492,12 @@ static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector,
 
 	skb_record_rx_queue(skb, ring->queue_index);
 	if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) {
-		if (adapter->vlgrp && is_vlan && (tag != 0))
+		if (adapter->vlgrp && is_vlan && (tag & VLAN_VID_MASK))
 			vlan_gro_receive(napi, adapter->vlgrp, tag, skb);
 		else
 			napi_gro_receive(napi, skb);
 	} else {
-		if (adapter->vlgrp && is_vlan && (tag != 0))
+		if (adapter->vlgrp && is_vlan && (tag & VLAN_VID_MASK))
 			vlan_hwaccel_rx(skb, adapter->vlgrp, tag);
 		else
 			netif_rx(skb);
@@ -510,8 +511,11 @@ static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector,
  * @skb: skb currently being received and modified
  **/
 static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter,
-                                     u32 status_err, struct sk_buff *skb)
+				     union ixgbe_adv_rx_desc *rx_desc,
+				     struct sk_buff *skb)
 {
+	u32 status_err = le32_to_cpu(rx_desc->wb.upper.status_error);
+
 	skb->ip_summed = CHECKSUM_NONE;
 
 	/* Rx csum disabled */
@@ -529,6 +533,16 @@ static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter,
 		return;
 
 	if (status_err & IXGBE_RXDADV_ERR_TCPE) {
+		u16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
+
+		/*
+		 * 82599 errata, UDP frames with a 0 checksum can be marked as
+		 * checksum errors.
+		 */
+		if ((pkt_info & IXGBE_RXDADV_PKTTYPE_UDP) &&
+		    (adapter->hw.mac.type == ixgbe_mac_82599EB))
+			return;
+
 		adapter->hw_csum_rx_error++;
 		return;
 	}
@@ -563,7 +577,6 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
 	union ixgbe_adv_rx_desc *rx_desc;
 	struct ixgbe_rx_buffer *bi;
 	unsigned int i;
-	unsigned int bufsz = rx_ring->rx_buf_len + NET_IP_ALIGN;
 
 	i = rx_ring->next_to_use;
 	bi = &rx_ring->rx_buffer_info[i];
@@ -572,7 +585,7 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
 		rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
 
 		if (!bi->page_dma &&
-		    (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)) {
+		    (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED)) {
 			if (!bi->page) {
 				bi->page = alloc_page(GFP_ATOMIC);
 				if (!bi->page) {
@@ -593,7 +606,9 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
 
 		if (!bi->skb) {
 			struct sk_buff *skb;
-			skb = netdev_alloc_skb(adapter->netdev, bufsz);
+			skb = netdev_alloc_skb(adapter->netdev,
+			                       (rx_ring->rx_buf_len +
+			                        NET_IP_ALIGN));
 
 			if (!skb) {
 				adapter->alloc_rx_buff_failed++;
@@ -608,12 +623,13 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
 			skb_reserve(skb, NET_IP_ALIGN);
 
 			bi->skb = skb;
-			bi->dma = pci_map_single(pdev, skb->data, bufsz,
+			bi->dma = pci_map_single(pdev, skb->data,
+			                         rx_ring->rx_buf_len,
 			                         PCI_DMA_FROMDEVICE);
 		}
 		/* Refresh the desc even if buffer_addrs didn't change because
 		 * each write-back erases this info. */
-		if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+		if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
 			rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma);
 			rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
 		} else {
@@ -710,7 +726,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 			break;
 		(*work_done)++;
 
-		if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+		if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
 			hdr_info = le16_to_cpu(ixgbe_get_hdr_info(rx_desc));
 			len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
 			       IXGBE_RXDADV_HDRBUFLEN_SHIFT;
@@ -732,6 +748,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 			pci_unmap_single(pdev, rx_buffer_info->dma,
 			                 rx_ring->rx_buf_len,
 			                 PCI_DMA_FROMDEVICE);
+			rx_buffer_info->dma = 0;
 			skb_put(skb, len);
 		}
 
@@ -763,7 +780,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		prefetch(next_rxd);
 		cleaned_count++;
 
-		if (adapter->flags & IXGBE_FLAG2_RSC_CAPABLE)
+		if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)
 			rsc_count = ixgbe_get_rsc_count(rx_desc);
 
 		if (rsc_count) {
@@ -781,7 +798,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 			rx_ring->stats.packets++;
 			rx_ring->stats.bytes += skb->len;
 		} else {
-			if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+			if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
 				rx_buffer_info->skb = next_buffer->skb;
 				rx_buffer_info->dma = next_buffer->dma;
 				next_buffer->skb = skb;
@@ -799,7 +816,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 			goto next_desc;
 		}
 
-		ixgbe_rx_checksum(adapter, staterr, skb);
+		ixgbe_rx_checksum(adapter, rx_desc, skb);
 
 		/* probably a little skewed due to removing CRC */
 		total_rx_bytes += skb->len;
@@ -1881,46 +1898,19 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
 
 #define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
 
-static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index)
+static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter,
+                                   struct ixgbe_ring *rx_ring)
 {
-	struct ixgbe_ring *rx_ring;
 	u32 srrctl;
-	int queue0 = 0;
-	unsigned long mask;
+	int index;
 	struct ixgbe_ring_feature *feature = adapter->ring_feature;
 
-	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
-		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-			int dcb_i = feature[RING_F_DCB].indices;
-			if (dcb_i == 8)
-				queue0 = index >> 4;
-			else if (dcb_i == 4)
-				queue0 = index >> 5;
-			else
-				dev_err(&adapter->pdev->dev, "Invalid DCB "
-				        "configuration\n");
-#ifdef IXGBE_FCOE
-			if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
-				struct ixgbe_ring_feature *f;
-
-				rx_ring = &adapter->rx_ring[queue0];
-				f = &adapter->ring_feature[RING_F_FCOE];
-				if ((queue0 == 0) && (index > rx_ring->reg_idx))
-					queue0 = f->mask + index -
-					         rx_ring->reg_idx - 1;
-			}
-#endif /* IXGBE_FCOE */
-		} else {
-			queue0 = index;
-		}
-	} else {
+	index = rx_ring->reg_idx;
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+		unsigned long mask;
 		mask = (unsigned long) feature[RING_F_RSS].mask;
-		queue0 = index & mask;
 		index = index & mask;
 	}
-
-	rx_ring = &adapter->rx_ring[queue0];
-
 	srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(index));
 
 	srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
@@ -1929,7 +1919,7 @@ static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index)
 	srrctl |= (IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
 		  IXGBE_SRRCTL_BSIZEHDR_MASK;
 
-	if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+	if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
 #if (PAGE_SIZE / 2) > IXGBE_MAX_RXBUFFER
 		srrctl |= IXGBE_MAX_RXBUFFER >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
 #else
@@ -1985,6 +1975,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 {
 	u64 rdba;
 	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_ring *rx_ring;
 	struct net_device *netdev = adapter->netdev;
 	int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
 	int i, j;
@@ -2001,11 +1992,6 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	/* Decide whether to use packet split mode or not */
 	adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
 
-#ifdef IXGBE_FCOE
-	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
-		adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
-#endif /* IXGBE_FCOE */
-
 	/* Set the RX buffer length according to the mode */
 	if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
 		rx_buf_len = IXGBE_RX_HDR_SIZE;
@@ -2019,7 +2005,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 			IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
 		}
 	} else {
-		if (!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED) &&
+		if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
 		    (netdev->mtu <= ETH_DATA_LEN))
 			rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE;
 		else
@@ -2053,29 +2039,35 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	 * the Base and Length of the Rx Descriptor Ring
 	 */
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		rdba = adapter->rx_ring[i].dma;
-		j = adapter->rx_ring[i].reg_idx;
+		rx_ring = &adapter->rx_ring[i];
+		rdba = rx_ring->dma;
+		j = rx_ring->reg_idx;
 		IXGBE_WRITE_REG(hw, IXGBE_RDBAL(j), (rdba & DMA_BIT_MASK(32)));
 		IXGBE_WRITE_REG(hw, IXGBE_RDBAH(j), (rdba >> 32));
 		IXGBE_WRITE_REG(hw, IXGBE_RDLEN(j), rdlen);
 		IXGBE_WRITE_REG(hw, IXGBE_RDH(j), 0);
 		IXGBE_WRITE_REG(hw, IXGBE_RDT(j), 0);
-		adapter->rx_ring[i].head = IXGBE_RDH(j);
-		adapter->rx_ring[i].tail = IXGBE_RDT(j);
-		adapter->rx_ring[i].rx_buf_len = rx_buf_len;
+		rx_ring->head = IXGBE_RDH(j);
+		rx_ring->tail = IXGBE_RDT(j);
+		rx_ring->rx_buf_len = rx_buf_len;
+
+		if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)
+			rx_ring->flags |= IXGBE_RING_RX_PS_ENABLED;
 
 #ifdef IXGBE_FCOE
 		if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
 			struct ixgbe_ring_feature *f;
 			f = &adapter->ring_feature[RING_F_FCOE];
-			if ((rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE) &&
-			    (i >= f->mask) && (i < f->mask + f->indices))
-				adapter->rx_ring[i].rx_buf_len =
-				        IXGBE_FCOE_JUMBO_FRAME_SIZE;
+			if ((i >= f->mask) && (i < f->mask + f->indices)) {
+				rx_ring->flags &= ~IXGBE_RING_RX_PS_ENABLED;
+				if (rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE)
+					rx_ring->rx_buf_len =
+					        IXGBE_FCOE_JUMBO_FRAME_SIZE;
+			}
 		}
 
 #endif /* IXGBE_FCOE */
-		ixgbe_configure_srrctl(adapter, j);
+		ixgbe_configure_srrctl(adapter, rx_ring);
 	}
 
 	if (hw->mac.type == ixgbe_mac_82598EB) {
@@ -2148,10 +2140,11 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 		IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
 	}
 
-	if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED) {
+	if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
 		/* Enable 82599 HW-RSC */
 		for (i = 0; i < adapter->num_rx_queues; i++) {
-			j = adapter->rx_ring[i].reg_idx;
+			rx_ring = &adapter->rx_ring[i];
+			j = rx_ring->reg_idx;
 			rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
 			rscctrl |= IXGBE_RSCCTL_RSCEN;
 			/*
@@ -2159,7 +2152,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 			 * total size of max desc * buf_len is not greater
 			 * than 65535
 			 */
-			if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+			if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
 #if (MAX_SKB_FRAGS > 16)
 				rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
 #elif (MAX_SKB_FRAGS > 8)
@@ -2694,16 +2687,23 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 
 	/*
 	 * For hot-pluggable SFP+ devices, a new SFP+ module may have
-	 * arrived before interrupts were enabled.  We need to kick off
-	 * the SFP+ module setup first, then try to bring up link.
+	 * arrived before interrupts were enabled but after probe.  Such
+	 * devices wouldn't have their type identified yet. We need to
+	 * kick off the SFP+ module setup first, then try to bring up link.
 	 * If we're not hot-pluggable SFP+, we just need to configure link
 	 * and bring it up.
 	 */
-	err = hw->phy.ops.identify(hw);
-	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		DPRINTK(PROBE, ERR, "PHY not supported on this NIC %d\n", err);
-		ixgbe_down(adapter);
-		return err;
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		err = hw->phy.ops.identify(hw);
+		if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+			/*
+			 * Take the device down and schedule the sfp tasklet
+			 * which will unregister_netdev and log it.
+			 */
+			ixgbe_down(adapter);
+			schedule_work(&adapter->sfp_config_module_task);
+			return err;
+		}
 	}
 
 	if (ixgbe_is_sfp(hw)) {
@@ -2812,9 +2812,11 @@ static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter,
 		}
 		if (!rx_buffer_info->page)
 			continue;
-		pci_unmap_page(pdev, rx_buffer_info->page_dma, PAGE_SIZE / 2,
-		               PCI_DMA_FROMDEVICE);
-		rx_buffer_info->page_dma = 0;
+		if (rx_buffer_info->page_dma) {
+			pci_unmap_page(pdev, rx_buffer_info->page_dma,
+			               PAGE_SIZE / 2, PCI_DMA_FROMDEVICE);
+			rx_buffer_info->page_dma = 0;
+		}
 		put_page(rx_buffer_info->page);
 		rx_buffer_info->page = NULL;
 		rx_buffer_info->page_offset = 0;
@@ -3118,7 +3120,11 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
 #endif
 		if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
 			DPRINTK(PROBE, INFO, "FCOE enabled with RSS \n");
-			ixgbe_set_rss_queues(adapter);
+			if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+			    (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+				ixgbe_set_fdir_queues(adapter);
+			else
+				ixgbe_set_rss_queues(adapter);
 		}
 		/* adding FCoE rx rings to the end */
 		f->mask = adapter->num_rx_queues;
@@ -3376,7 +3382,12 @@ static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
 		}
 #endif /* CONFIG_IXGBE_DCB */
 		if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
-			ixgbe_cache_ring_rss(adapter);
+			if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+			    (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+				ixgbe_cache_ring_fdir(adapter);
+			else
+				ixgbe_cache_ring_rss(adapter);
+
 			fcoe_i = f->mask;
 		}
 		for (i = 0; i < f->indices; i++, fcoe_i++)
@@ -3716,14 +3727,15 @@ static void ixgbe_sfp_task(struct work_struct *work)
 	if ((hw->phy.type == ixgbe_phy_nl) &&
 	    (hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
 		s32 ret = hw->phy.ops.identify_sfp(hw);
-		if (ret)
+		if (ret == IXGBE_ERR_SFP_NOT_PRESENT)
 			goto reschedule;
 		ret = hw->phy.ops.reset(hw);
 		if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-			DPRINTK(PROBE, ERR, "failed to initialize because an "
-			        "unsupported SFP+ module type was detected.\n"
-			        "Reload the driver after installing a "
-			        "supported module.\n");
+			dev_err(&adapter->pdev->dev, "failed to initialize "
+				"because an unsupported SFP+ module type "
+				"was detected.\n"
+				"Reload the driver after installing a "
+				"supported module.\n");
 			unregister_netdev(adapter->netdev);
 		} else {
 			DPRINTK(PROBE, INFO, "detected SFP+: %d\n",
@@ -3776,16 +3788,17 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 		adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
 	} else if (hw->mac.type == ixgbe_mac_82599EB) {
 		adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
-		adapter->flags |= IXGBE_FLAG2_RSC_CAPABLE;
-		adapter->flags |= IXGBE_FLAG2_RSC_ENABLED;
+		adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
+		adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
 		adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
 		adapter->ring_feature[RING_F_FDIR].indices =
 		                                         IXGBE_MAX_FDIR_INDICES;
 		adapter->atr_sample_rate = 20;
 		adapter->fdir_pballoc = 0;
 #ifdef IXGBE_FCOE
-		adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
-		adapter->ring_feature[RING_F_FCOE].indices = IXGBE_FCRETA_SIZE;
+		adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE;
+		adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+		adapter->ring_feature[RING_F_FCOE].indices = 0;
 #endif /* IXGBE_FCOE */
 	}
 
@@ -4502,7 +4515,8 @@ static void ixgbe_multispeed_fiber_task(struct work_struct *work)
 	u32 autoneg;
 
 	adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK;
-	if (hw->mac.ops.get_link_capabilities)
+	autoneg = hw->phy.autoneg_advertised;
+	if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
 		hw->mac.ops.get_link_capabilities(hw, &autoneg,
 		                                  &hw->mac.autoneg);
 	if (hw->mac.ops.setup_link_speed)
@@ -4524,10 +4538,17 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work)
 	u32 err;
 
 	adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK;
+
+	/* Time for electrical oscillations to settle down */
+	msleep(100);
 	err = hw->phy.ops.identify_sfp(hw);
+
 	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		DPRINTK(PROBE, ERR, "PHY not supported on this NIC %d\n", err);
-		ixgbe_down(adapter);
+		dev_err(&adapter->pdev->dev, "failed to initialize because "
+			"an unsupported SFP+ module type was detected.\n"
+			"Reload the driver after installing a supported "
+			"module.\n");
+		unregister_netdev(adapter->netdev);
 		return;
 	}
 	hw->mac.ops.setup_sfp(hw);
@@ -5095,9 +5116,6 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	int count = 0;
 	unsigned int f;
 
-	r_idx = skb->queue_mapping;
-	tx_ring = &adapter->tx_ring[r_idx];
-
 	if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
 		tx_flags |= vlan_tx_tag_get(skb);
 		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
@@ -5107,11 +5125,19 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
 		tx_flags |= IXGBE_TX_FLAGS_VLAN;
 	} else if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-		tx_flags |= (skb->queue_mapping << 13);
-		tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
-		tx_flags |= IXGBE_TX_FLAGS_VLAN;
+		if (skb->priority != TC_PRIO_CONTROL) {
+			tx_flags |= (skb->queue_mapping << 13);
+			tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
+			tx_flags |= IXGBE_TX_FLAGS_VLAN;
+		} else {
+			skb->queue_mapping =
+				adapter->ring_feature[RING_F_DCB].indices-1;
+		}
 	}
 
+	r_idx = skb->queue_mapping;
+	tx_ring = &adapter->tx_ring[r_idx];
+
 	if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
 	    (skb->protocol == htons(ETH_P_FCOE)))
 		tx_flags |= IXGBE_TX_FLAGS_FCOE;
@@ -5310,12 +5336,19 @@ static int ixgbe_del_sanmac_netdev(struct net_device *dev)
 static void ixgbe_netpoll(struct net_device *netdev)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	int i;
 
-	disable_irq(adapter->pdev->irq);
 	adapter->flags |= IXGBE_FLAG_IN_NETPOLL;
-	ixgbe_intr(adapter->pdev->irq, netdev);
+	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+		int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+		for (i = 0; i < num_q_vectors; i++) {
+			struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
+			ixgbe_msix_clean_many(0, q_vector);
+		}
+	} else {
+		ixgbe_intr(adapter->pdev->irq, netdev);
+	}
 	adapter->flags &= ~IXGBE_FLAG_IN_NETPOLL;
-	enable_irq(adapter->pdev->irq);
 }
 #endif
 
@@ -5513,8 +5546,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 			  round_jiffies(jiffies + (2 * HZ)));
 		err = 0;
 	} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		dev_err(&adapter->pdev->dev, "failed to load because an "
-		        "unsupported SFP+ module type was detected.\n");
+		dev_err(&adapter->pdev->dev, "failed to initialize because "
+			"an unsupported SFP+ module type was detected.\n"
+			"Reload the driver after installing a supported "
+			"module.\n");
 		goto err_sw_init;
 	} else if (err) {
 		dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err);
@@ -5548,29 +5583,18 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 #endif
 
 #ifdef IXGBE_FCOE
-	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+	if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) {
 		if (hw->mac.ops.get_device_caps) {
 			hw->mac.ops.get_device_caps(hw, &device_caps);
-			if (!(device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)) {
-				netdev->features |= NETIF_F_FCOE_CRC;
-				netdev->features |= NETIF_F_FSO;
-				netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
-				DPRINTK(DRV, INFO, "FCoE enabled, "
-					"disabling Flow Director\n");
-				adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
-				adapter->flags &=
-				        ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
-				adapter->atr_sample_rate = 0;
-			} else {
-				adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
-			}
+			if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)
+				adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE;
 		}
 	}
 #endif /* IXGBE_FCOE */
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
-	if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED)
+	if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
 		netdev->features |= NETIF_F_LRO;
 
 	/* make sure the EEPROM is good */
@@ -5612,7 +5636,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		adapter->wol = 0;
 		break;
 	}
-	device_init_wakeup(&adapter->pdev->dev, true);
 	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
 	/* pick up the PCI bus settings for reporting later */
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 453e966762f..9ecad17522c 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -60,6 +60,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 
 	if (hw->phy.type == ixgbe_phy_unknown) {
 		for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+			hw->phy.mdio.prtad = phy_addr;
 			if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
 				ixgbe_get_phy_id(hw);
 				hw->phy.type =
@@ -68,6 +69,8 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 				break;
 			}
 		}
+		/* clear value if nothing found */
+		hw->phy.mdio.prtad = 0;
 	} else {
 		status = 0;
 	}
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index fa87309dc08..be90eb4575f 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -718,6 +718,12 @@
 #define IXGBE_ECC_STATUS_82599  0x110E0
 #define IXGBE_BAR_CTRL_82599    0x110F4
 
+/* PCI Express Control */
+#define IXGBE_GCR_CMPL_TMOUT_MASK       0x0000F000
+#define IXGBE_GCR_CMPL_TMOUT_10ms       0x00001000
+#define IXGBE_GCR_CMPL_TMOUT_RESEND     0x00010000
+#define IXGBE_GCR_CAP_VER2              0x00040000
+
 /* Time Sync Registers */
 #define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */
 #define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */
@@ -1521,6 +1527,7 @@
 
 /* PCI Bus Info */
 #define IXGBE_PCI_LINK_STATUS     0xB2
+#define IXGBE_PCI_DEVICE_CONTROL2 0xC8
 #define IXGBE_PCI_LINK_WIDTH      0x3F0
 #define IXGBE_PCI_LINK_WIDTH_1    0x10
 #define IXGBE_PCI_LINK_WIDTH_2    0x20
@@ -1531,6 +1538,7 @@
 #define IXGBE_PCI_LINK_SPEED_5000 0x2
 #define IXGBE_PCI_HEADER_TYPE_REGISTER  0x0E
 #define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define IXGBE_PCI_DEVICE_CONTROL2_16ms  0x0005
 
 /* Number of 100 microseconds we wait for PCI Express master disable */
 #define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index 2a0174b62e9..92fb8235c76 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -41,6 +41,7 @@ static int ixpdev_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct ixpdev_priv *ip = netdev_priv(dev);
 	struct ixpdev_tx_desc *desc;
 	int entry;
+	unsigned long flags;
 
 	if (unlikely(skb->len > PAGE_SIZE)) {
 		/* @@@ Count drops.  */
@@ -63,11 +64,11 @@ static int ixpdev_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	dev->trans_start = jiffies;
 
-	local_irq_disable();
+	local_irq_save(flags);
 	ip->tx_queue_entries++;
 	if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN)
 		netif_stop_queue(dev);
-	local_irq_enable();
+	local_irq_restore(flags);
 
 	return 0;
 }
diff --git a/drivers/net/jazzsonic.c b/drivers/net/jazzsonic.c
index d12106b47bf..2f286091394 100644
--- a/drivers/net/jazzsonic.c
+++ b/drivers/net/jazzsonic.c
@@ -229,6 +229,7 @@ static int __init jazz_sonic_probe(struct platform_device *pdev)
 	lp = netdev_priv(dev);
 	lp->device = &pdev->dev;
 	SET_NETDEV_DEV(dev, &pdev->dev);
+	platform_set_drvdata(pdev, dev);
 
 	netdev_boot_setup_check(dev);
 
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
new file mode 100644
index 00000000000..9a1dea60c1c
--- /dev/null
+++ b/drivers/net/ks8851.c
@@ -0,0 +1,1322 @@
+/* drivers/net/ks8651.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *	http://www.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/cache.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+
+#include <linux/spi/spi.h>
+
+#include "ks8851.h"
+
+/**
+ * struct ks8851_rxctrl - KS8851 driver rx control
+ * @mchash: Multicast hash-table data.
+ * @rxcr1: KS_RXCR1 register setting
+ * @rxcr2: KS_RXCR2 register setting
+ *
+ * Representation of the settings needs to control the receive filtering
+ * such as the multicast hash-filter and the receive register settings. This
+ * is used to make the job of working out if the receive settings change and
+ * then issuing the new settings to the worker that will send the necessary
+ * commands.
+ */
+struct ks8851_rxctrl {
+	u16	mchash[4];
+	u16	rxcr1;
+	u16	rxcr2;
+};
+
+/**
+ * union ks8851_tx_hdr - tx header data
+ * @txb: The header as bytes
+ * @txw: The header as 16bit, little-endian words
+ *
+ * A dual representation of the tx header data to allow
+ * access to individual bytes, and to allow 16bit accesses
+ * with 16bit alignment.
+ */
+union ks8851_tx_hdr {
+	u8	txb[6];
+	__le16	txw[3];
+};
+
+/**
+ * struct ks8851_net - KS8851 driver private data
+ * @netdev: The network device we're bound to
+ * @spidev: The spi device we're bound to.
+ * @lock: Lock to ensure that the device is not accessed when busy.
+ * @statelock: Lock on this structure for tx list.
+ * @mii: The MII state information for the mii calls.
+ * @rxctrl: RX settings for @rxctrl_work.
+ * @tx_work: Work queue for tx packets
+ * @irq_work: Work queue for servicing interrupts
+ * @rxctrl_work: Work queue for updating RX mode and multicast lists
+ * @txq: Queue of packets for transmission.
+ * @spi_msg1: pre-setup SPI transfer with one message, @spi_xfer1.
+ * @spi_msg2: pre-setup SPI transfer with two messages, @spi_xfer2.
+ * @txh: Space for generating packet TX header in DMA-able data
+ * @rxd: Space for receiving SPI data, in DMA-able space.
+ * @txd: Space for transmitting SPI data, in DMA-able space.
+ * @msg_enable: The message flags controlling driver output (see ethtool).
+ * @fid: Incrementing frame id tag.
+ * @rc_ier: Cached copy of KS_IER.
+ * @rc_rxqcr: Cached copy of KS_RXQCR.
+ *
+ * The @lock ensures that the chip is protected when certain operations are
+ * in progress. When the read or write packet transfer is in progress, most
+ * of the chip registers are not ccessible until the transfer is finished and
+ * the DMA has been de-asserted.
+ *
+ * The @statelock is used to protect information in the structure which may
+ * need to be accessed via several sources, such as the network driver layer
+ * or one of the work queues.
+ *
+ * We align the buffers we may use for rx/tx to ensure that if the SPI driver
+ * wants to DMA map them, it will not have any problems with data the driver
+ * modifies.
+ */
+struct ks8851_net {
+	struct net_device	*netdev;
+	struct spi_device	*spidev;
+	struct mutex		lock;
+	spinlock_t		statelock;
+
+	union ks8851_tx_hdr	txh ____cacheline_aligned;
+	u8			rxd[8];
+	u8			txd[8];
+
+	u32			msg_enable ____cacheline_aligned;
+	u16			tx_space;
+	u8			fid;
+
+	u16			rc_ier;
+	u16			rc_rxqcr;
+
+	struct mii_if_info	mii;
+	struct ks8851_rxctrl	rxctrl;
+
+	struct work_struct	tx_work;
+	struct work_struct	irq_work;
+	struct work_struct	rxctrl_work;
+
+	struct sk_buff_head	txq;
+
+	struct spi_message	spi_msg1;
+	struct spi_message	spi_msg2;
+	struct spi_transfer	spi_xfer1;
+	struct spi_transfer	spi_xfer2[2];
+};
+
+static int msg_enable;
+
+#define ks_info(_ks, _msg...) dev_info(&(_ks)->spidev->dev, _msg)
+#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->spidev->dev, _msg)
+#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->spidev->dev, _msg)
+#define ks_err(_ks, _msg...) dev_err(&(_ks)->spidev->dev, _msg)
+
+/* shift for byte-enable data */
+#define BYTE_EN(_x)	((_x) << 2)
+
+/* turn register number and byte-enable mask into data for start of packet */
+#define MK_OP(_byteen, _reg) (BYTE_EN(_byteen) | (_reg)  << (8+2) | (_reg) >> 6)
+
+/* SPI register read/write calls.
+ *
+ * All these calls issue SPI transactions to access the chip's registers. They
+ * all require that the necessary lock is held to prevent accesses when the
+ * chip is busy transfering packet data (RX/TX FIFO accesses).
+ */
+
+/**
+ * ks8851_wrreg16 - write 16bit register value to chip
+ * @ks: The chip state
+ * @reg: The register address
+ * @val: The value to write
+ *
+ * Issue a write to put the value @val into the register specified in @reg.
+ */
+static void ks8851_wrreg16(struct ks8851_net *ks, unsigned reg, unsigned val)
+{
+	struct spi_transfer *xfer = &ks->spi_xfer1;
+	struct spi_message *msg = &ks->spi_msg1;
+	__le16 txb[2];
+	int ret;
+
+	txb[0] = cpu_to_le16(MK_OP(reg & 2 ? 0xC : 0x03, reg) | KS_SPIOP_WR);
+	txb[1] = cpu_to_le16(val);
+
+	xfer->tx_buf = txb;
+	xfer->rx_buf = NULL;
+	xfer->len = 4;
+
+	ret = spi_sync(ks->spidev, msg);
+	if (ret < 0)
+		ks_err(ks, "spi_sync() failed\n");
+}
+
+/**
+ * ks8851_rx_1msg - select whether to use one or two messages for spi read
+ * @ks: The device structure
+ *
+ * Return whether to generate a single message with a tx and rx buffer
+ * supplied to spi_sync(), or alternatively send the tx and rx buffers
+ * as separate messages.
+ *
+ * Depending on the hardware in use, a single message may be more efficient
+ * on interrupts or work done by the driver.
+ *
+ * This currently always returns true until we add some per-device data passed
+ * from the platform code to specify which mode is better.
+ */
+static inline bool ks8851_rx_1msg(struct ks8851_net *ks)
+{
+	return true;
+}
+
+/**
+ * ks8851_rdreg - issue read register command and return the data
+ * @ks: The device state
+ * @op: The register address and byte enables in message format.
+ * @rxb: The RX buffer to return the result into
+ * @rxl: The length of data expected.
+ *
+ * This is the low level read call that issues the necessary spi message(s)
+ * to read data from the register specified in @op.
+ */
+static void ks8851_rdreg(struct ks8851_net *ks, unsigned op,
+			 u8 *rxb, unsigned rxl)
+{
+	struct spi_transfer *xfer;
+	struct spi_message *msg;
+	__le16 *txb = (__le16 *)ks->txd;
+	u8 *trx = ks->rxd;
+	int ret;
+
+	txb[0] = cpu_to_le16(op | KS_SPIOP_RD);
+
+	if (ks8851_rx_1msg(ks)) {
+		msg = &ks->spi_msg1;
+		xfer = &ks->spi_xfer1;
+
+		xfer->tx_buf = txb;
+		xfer->rx_buf = trx;
+		xfer->len = rxl + 2;
+	} else {
+		msg = &ks->spi_msg2;
+		xfer = ks->spi_xfer2;
+
+		xfer->tx_buf = txb;
+		xfer->rx_buf = NULL;
+		xfer->len = 2;
+
+		xfer++;
+		xfer->tx_buf = NULL;
+		xfer->rx_buf = trx;
+		xfer->len = rxl;
+	}
+
+	ret = spi_sync(ks->spidev, msg);
+	if (ret < 0)
+		ks_err(ks, "read: spi_sync() failed\n");
+	else if (ks8851_rx_1msg(ks))
+		memcpy(rxb, trx + 2, rxl);
+	else
+		memcpy(rxb, trx, rxl);
+}
+
+/**
+ * ks8851_rdreg8 - read 8 bit register from device
+ * @ks: The chip information
+ * @reg: The register address
+ *
+ * Read a 8bit register from the chip, returning the result
+*/
+static unsigned ks8851_rdreg8(struct ks8851_net *ks, unsigned reg)
+{
+	u8 rxb[1];
+
+	ks8851_rdreg(ks, MK_OP(1 << (reg & 3), reg), rxb, 1);
+	return rxb[0];
+}
+
+/**
+ * ks8851_rdreg16 - read 16 bit register from device
+ * @ks: The chip information
+ * @reg: The register address
+ *
+ * Read a 16bit register from the chip, returning the result
+*/
+static unsigned ks8851_rdreg16(struct ks8851_net *ks, unsigned reg)
+{
+	__le16 rx = 0;
+
+	ks8851_rdreg(ks, MK_OP(reg & 2 ? 0xC : 0x3, reg), (u8 *)&rx, 2);
+	return le16_to_cpu(rx);
+}
+
+/**
+ * ks8851_rdreg32 - read 32 bit register from device
+ * @ks: The chip information
+ * @reg: The register address
+ *
+ * Read a 32bit register from the chip.
+ *
+ * Note, this read requires the address be aligned to 4 bytes.
+*/
+static unsigned ks8851_rdreg32(struct ks8851_net *ks, unsigned reg)
+{
+	__le32 rx = 0;
+
+	WARN_ON(reg & 3);
+
+	ks8851_rdreg(ks, MK_OP(0xf, reg), (u8 *)&rx, 4);
+	return le32_to_cpu(rx);
+}
+
+/**
+ * ks8851_soft_reset - issue one of the soft reset to the device
+ * @ks: The device state.
+ * @op: The bit(s) to set in the GRR
+ *
+ * Issue the relevant soft-reset command to the device's GRR register
+ * specified by @op.
+ *
+ * Note, the delays are in there as a caution to ensure that the reset
+ * has time to take effect and then complete. Since the datasheet does
+ * not currently specify the exact sequence, we have chosen something
+ * that seems to work with our device.
+ */
+static void ks8851_soft_reset(struct ks8851_net *ks, unsigned op)
+{
+	ks8851_wrreg16(ks, KS_GRR, op);
+	mdelay(1);	/* wait a short time to effect reset */
+	ks8851_wrreg16(ks, KS_GRR, 0);
+	mdelay(1);	/* wait for condition to clear */
+}
+
+/**
+ * ks8851_write_mac_addr - write mac address to device registers
+ * @dev: The network device
+ *
+ * Update the KS8851 MAC address registers from the address in @dev.
+ *
+ * This call assumes that the chip is not running, so there is no need to
+ * shutdown the RXQ process whilst setting this.
+*/
+static int ks8851_write_mac_addr(struct net_device *dev)
+{
+	struct ks8851_net *ks = netdev_priv(dev);
+	u16 *mcp = (u16 *)dev->dev_addr;
+
+	mutex_lock(&ks->lock);
+
+	ks8851_wrreg16(ks, KS_MARL, mcp[0]);
+	ks8851_wrreg16(ks, KS_MARM, mcp[1]);
+	ks8851_wrreg16(ks, KS_MARH, mcp[2]);
+
+	mutex_unlock(&ks->lock);
+
+	return 0;
+}
+
+/**
+ * ks8851_init_mac - initialise the mac address
+ * @ks: The device structure
+ *
+ * Get or create the initial mac address for the device and then set that
+ * into the station address register. Currently we assume that the device
+ * does not have a valid mac address in it, and so we use random_ether_addr()
+ * to create a new one.
+ *
+ * In future, the driver should check to see if the device has an EEPROM
+ * attached and whether that has a valid ethernet address in it.
+ */
+static void ks8851_init_mac(struct ks8851_net *ks)
+{
+	struct net_device *dev = ks->netdev;
+
+	random_ether_addr(dev->dev_addr);
+	ks8851_write_mac_addr(dev);
+}
+
+/**
+ * ks8851_irq - device interrupt handler
+ * @irq: Interrupt number passed from the IRQ hnalder.
+ * @pw: The private word passed to register_irq(), our struct ks8851_net.
+ *
+ * Disable the interrupt from happening again until we've processed the
+ * current status by scheduling ks8851_irq_work().
+ */
+static irqreturn_t ks8851_irq(int irq, void *pw)
+{
+	struct ks8851_net *ks = pw;
+
+	disable_irq_nosync(irq);
+	schedule_work(&ks->irq_work);
+	return IRQ_HANDLED;
+}
+
+/**
+ * ks8851_rdfifo - read data from the receive fifo
+ * @ks: The device state.
+ * @buff: The buffer address
+ * @len: The length of the data to read
+ *
+ * Issue an RXQ FIFO read command and read the @len ammount of data from
+ * the FIFO into the buffer specified by @buff.
+ */
+static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len)
+{
+	struct spi_transfer *xfer = ks->spi_xfer2;
+	struct spi_message *msg = &ks->spi_msg2;
+	u8 txb[1];
+	int ret;
+
+	if (netif_msg_rx_status(ks))
+		ks_dbg(ks, "%s: %d@%p\n", __func__, len, buff);
+
+	/* set the operation we're issuing */
+	txb[0] = KS_SPIOP_RXFIFO;
+
+	xfer->tx_buf = txb;
+	xfer->rx_buf = NULL;
+	xfer->len = 1;
+
+	xfer++;
+	xfer->rx_buf = buff;
+	xfer->tx_buf = NULL;
+	xfer->len = len;
+
+	ret = spi_sync(ks->spidev, msg);
+	if (ret < 0)
+		ks_err(ks, "%s: spi_sync() failed\n", __func__);
+}
+
+/**
+ * ks8851_dbg_dumpkkt - dump initial packet contents to debug
+ * @ks: The device state
+ * @rxpkt: The data for the received packet
+ *
+ * Dump the initial data from the packet to dev_dbg().
+*/
+static void ks8851_dbg_dumpkkt(struct ks8851_net *ks, u8 *rxpkt)
+{
+	ks_dbg(ks, "pkt %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x\n",
+	       rxpkt[4], rxpkt[5], rxpkt[6], rxpkt[7],
+	       rxpkt[8], rxpkt[9], rxpkt[10], rxpkt[11],
+	       rxpkt[12], rxpkt[13], rxpkt[14], rxpkt[15]);
+}
+
+/**
+ * ks8851_rx_pkts - receive packets from the host
+ * @ks: The device information.
+ *
+ * This is called from the IRQ work queue when the system detects that there
+ * are packets in the receive queue. Find out how many packets there are and
+ * read them from the FIFO.
+ */
+static void ks8851_rx_pkts(struct ks8851_net *ks)
+{
+	struct sk_buff *skb;
+	unsigned rxfc;
+	unsigned rxlen;
+	unsigned rxstat;
+	u32 rxh;
+	u8 *rxpkt;
+
+	rxfc = ks8851_rdreg8(ks, KS_RXFC);
+
+	if (netif_msg_rx_status(ks))
+		ks_dbg(ks, "%s: %d packets\n", __func__, rxfc);
+
+	/* Currently we're issuing a read per packet, but we could possibly
+	 * improve the code by issuing a single read, getting the receive
+	 * header, allocating the packet and then reading the packet data
+	 * out in one go.
+	 *
+	 * This form of operation would require us to hold the SPI bus'
+	 * chipselect low during the entie transaction to avoid any
+	 * reset to the data stream comming from the chip.
+	 */
+
+	for (; rxfc != 0; rxfc--) {
+		rxh = ks8851_rdreg32(ks, KS_RXFHSR);
+		rxstat = rxh & 0xffff;
+		rxlen = rxh >> 16;
+
+		if (netif_msg_rx_status(ks))
+			ks_dbg(ks, "rx: stat 0x%04x, len 0x%04x\n",
+				rxstat, rxlen);
+
+		/* the length of the packet includes the 32bit CRC */
+
+		/* set dma read address */
+		ks8851_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI | 0x00);
+
+		/* start the packet dma process, and set auto-dequeue rx */
+		ks8851_wrreg16(ks, KS_RXQCR,
+			       ks->rc_rxqcr | RXQCR_SDA | RXQCR_ADRFE);
+
+		if (rxlen > 0) {
+			skb = netdev_alloc_skb(ks->netdev, rxlen + 2 + 8);
+			if (!skb) {
+				/* todo - dump frame and move on */
+			}
+
+			/* two bytes to ensure ip is aligned, and four bytes
+			 * for the status header and 4 bytes of garbage */
+			skb_reserve(skb, 2 + 4 + 4);
+
+			rxpkt = skb_put(skb, rxlen - 4) - 8;
+
+			/* align the packet length to 4 bytes, and add 4 bytes
+			 * as we're getting the rx status header as well */
+			ks8851_rdfifo(ks, rxpkt, ALIGN(rxlen, 4) + 8);
+
+			if (netif_msg_pktdata(ks))
+				ks8851_dbg_dumpkkt(ks, rxpkt);
+
+			skb->protocol = eth_type_trans(skb, ks->netdev);
+			netif_rx(skb);
+
+			ks->netdev->stats.rx_packets++;
+			ks->netdev->stats.rx_bytes += rxlen - 4;
+		}
+
+		ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+	}
+}
+
+/**
+ * ks8851_irq_work - work queue handler for dealing with interrupt requests
+ * @work: The work structure that was scheduled by schedule_work()
+ *
+ * This is the handler invoked when the ks8851_irq() is called to find out
+ * what happened, as we cannot allow ourselves to sleep whilst waiting for
+ * anything other process has the chip's lock.
+ *
+ * Read the interrupt status, work out what needs to be done and then clear
+ * any of the interrupts that are not needed.
+ */
+static void ks8851_irq_work(struct work_struct *work)
+{
+	struct ks8851_net *ks = container_of(work, struct ks8851_net, irq_work);
+	unsigned status;
+	unsigned handled = 0;
+
+	mutex_lock(&ks->lock);
+
+	status = ks8851_rdreg16(ks, KS_ISR);
+
+	if (netif_msg_intr(ks))
+		dev_dbg(&ks->spidev->dev, "%s: status 0x%04x\n",
+			__func__, status);
+
+	if (status & IRQ_LCI) {
+		/* should do something about checking link status */
+		handled |= IRQ_LCI;
+	}
+
+	if (status & IRQ_LDI) {
+		u16 pmecr = ks8851_rdreg16(ks, KS_PMECR);
+		pmecr &= ~PMECR_WKEVT_MASK;
+		ks8851_wrreg16(ks, KS_PMECR, pmecr | PMECR_WKEVT_LINK);
+
+		handled |= IRQ_LDI;
+	}
+
+	if (status & IRQ_RXPSI)
+		handled |= IRQ_RXPSI;
+
+	if (status & IRQ_TXI) {
+		handled |= IRQ_TXI;
+
+		/* no lock here, tx queue should have been stopped */
+
+		/* update our idea of how much tx space is available to the
+		 * system */
+		ks->tx_space = ks8851_rdreg16(ks, KS_TXMIR);
+
+		if (netif_msg_intr(ks))
+			ks_dbg(ks, "%s: txspace %d\n", __func__, ks->tx_space);
+	}
+
+	if (status & IRQ_RXI)
+		handled |= IRQ_RXI;
+
+	if (status & IRQ_SPIBEI) {
+		dev_err(&ks->spidev->dev, "%s: spi bus error\n", __func__);
+		handled |= IRQ_SPIBEI;
+	}
+
+	ks8851_wrreg16(ks, KS_ISR, handled);
+
+	if (status & IRQ_RXI) {
+		/* the datasheet says to disable the rx interrupt during
+		 * packet read-out, however we're masking the interrupt
+		 * from the device so do not bother masking just the RX
+		 * from the device. */
+
+		ks8851_rx_pkts(ks);
+	}
+
+	/* if something stopped the rx process, probably due to wanting
+	 * to change the rx settings, then do something about restarting
+	 * it. */
+	if (status & IRQ_RXPSI) {
+		struct ks8851_rxctrl *rxc = &ks->rxctrl;
+
+		/* update the multicast hash table */
+		ks8851_wrreg16(ks, KS_MAHTR0, rxc->mchash[0]);
+		ks8851_wrreg16(ks, KS_MAHTR1, rxc->mchash[1]);
+		ks8851_wrreg16(ks, KS_MAHTR2, rxc->mchash[2]);
+		ks8851_wrreg16(ks, KS_MAHTR3, rxc->mchash[3]);
+
+		ks8851_wrreg16(ks, KS_RXCR2, rxc->rxcr2);
+		ks8851_wrreg16(ks, KS_RXCR1, rxc->rxcr1);
+	}
+
+	mutex_unlock(&ks->lock);
+
+	if (status & IRQ_TXI)
+		netif_wake_queue(ks->netdev);
+
+	enable_irq(ks->netdev->irq);
+}
+
+/**
+ * calc_txlen - calculate size of message to send packet
+ * @len: Lenght of data
+ *
+ * Returns the size of the TXFIFO message needed to send
+ * this packet.
+ */
+static inline unsigned calc_txlen(unsigned len)
+{
+	return ALIGN(len + 4, 4);
+}
+
+/**
+ * ks8851_wrpkt - write packet to TX FIFO
+ * @ks: The device state.
+ * @txp: The sk_buff to transmit.
+ * @irq: IRQ on completion of the packet.
+ *
+ * Send the @txp to the chip. This means creating the relevant packet header
+ * specifying the length of the packet and the other information the chip
+ * needs, such as IRQ on completion. Send the header and the packet data to
+ * the device.
+ */
+static void ks8851_wrpkt(struct ks8851_net *ks, struct sk_buff *txp, bool irq)
+{
+	struct spi_transfer *xfer = ks->spi_xfer2;
+	struct spi_message *msg = &ks->spi_msg2;
+	unsigned fid = 0;
+	int ret;
+
+	if (netif_msg_tx_queued(ks))
+		dev_dbg(&ks->spidev->dev, "%s: skb %p, %d@%p, irq %d\n",
+			__func__, txp, txp->len, txp->data, irq);
+
+	fid = ks->fid++;
+	fid &= TXFR_TXFID_MASK;
+
+	if (irq)
+		fid |= TXFR_TXIC;	/* irq on completion */
+
+	/* start header at txb[1] to align txw entries */
+	ks->txh.txb[1] = KS_SPIOP_TXFIFO;
+	ks->txh.txw[1] = cpu_to_le16(fid);
+	ks->txh.txw[2] = cpu_to_le16(txp->len);
+
+	xfer->tx_buf = &ks->txh.txb[1];
+	xfer->rx_buf = NULL;
+	xfer->len = 5;
+
+	xfer++;
+	xfer->tx_buf = txp->data;
+	xfer->rx_buf = NULL;
+	xfer->len = ALIGN(txp->len, 4);
+
+	ret = spi_sync(ks->spidev, msg);
+	if (ret < 0)
+		ks_err(ks, "%s: spi_sync() failed\n", __func__);
+}
+
+/**
+ * ks8851_done_tx - update and then free skbuff after transmitting
+ * @ks: The device state
+ * @txb: The buffer transmitted
+ */
+static void ks8851_done_tx(struct ks8851_net *ks, struct sk_buff *txb)
+{
+	struct net_device *dev = ks->netdev;
+
+	dev->stats.tx_bytes += txb->len;
+	dev->stats.tx_packets++;
+
+	dev_kfree_skb(txb);
+}
+
+/**
+ * ks8851_tx_work - process tx packet(s)
+ * @work: The work strucutre what was scheduled.
+ *
+ * This is called when a number of packets have been scheduled for
+ * transmission and need to be sent to the device.
+ */
+static void ks8851_tx_work(struct work_struct *work)
+{
+	struct ks8851_net *ks = container_of(work, struct ks8851_net, tx_work);
+	struct sk_buff *txb;
+	bool last = false;
+
+	mutex_lock(&ks->lock);
+
+	while (!last) {
+		txb = skb_dequeue(&ks->txq);
+		last = skb_queue_empty(&ks->txq);
+
+		ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA);
+		ks8851_wrpkt(ks, txb, last);
+		ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+		ks8851_wrreg16(ks, KS_TXQCR, TXQCR_METFE);
+
+		ks8851_done_tx(ks, txb);
+	}
+
+	mutex_unlock(&ks->lock);
+}
+
+/**
+ * ks8851_set_powermode - set power mode of the device
+ * @ks: The device state
+ * @pwrmode: The power mode value to write to KS_PMECR.
+ *
+ * Change the power mode of the chip.
+ */
+static void ks8851_set_powermode(struct ks8851_net *ks, unsigned pwrmode)
+{
+	unsigned pmecr;
+
+	if (netif_msg_hw(ks))
+		ks_dbg(ks, "setting power mode %d\n", pwrmode);
+
+	pmecr = ks8851_rdreg16(ks, KS_PMECR);
+	pmecr &= ~PMECR_PM_MASK;
+	pmecr |= pwrmode;
+
+	ks8851_wrreg16(ks, KS_PMECR, pmecr);
+}
+
+/**
+ * ks8851_net_open - open network device
+ * @dev: The network device being opened.
+ *
+ * Called when the network device is marked active, such as a user executing
+ * 'ifconfig up' on the device.
+ */
+static int ks8851_net_open(struct net_device *dev)
+{
+	struct ks8851_net *ks = netdev_priv(dev);
+
+	/* lock the card, even if we may not actually be doing anything
+	 * else at the moment */
+	mutex_lock(&ks->lock);
+
+	if (netif_msg_ifup(ks))
+		ks_dbg(ks, "opening %s\n", dev->name);
+
+	/* bring chip out of any power saving mode it was in */
+	ks8851_set_powermode(ks, PMECR_PM_NORMAL);
+
+	/* issue a soft reset to the RX/TX QMU to put it into a known
+	 * state. */
+	ks8851_soft_reset(ks, GRR_QMU);
+
+	/* setup transmission parameters */
+
+	ks8851_wrreg16(ks, KS_TXCR, (TXCR_TXE | /* enable transmit process */
+				     TXCR_TXPE | /* pad to min length */
+				     TXCR_TXCRC | /* add CRC */
+				     TXCR_TXFCE)); /* enable flow control */
+
+	/* auto-increment tx data, reset tx pointer */
+	ks8851_wrreg16(ks, KS_TXFDPR, TXFDPR_TXFPAI);
+
+	/* setup receiver control */
+
+	ks8851_wrreg16(ks, KS_RXCR1, (RXCR1_RXPAFMA | /*  from mac filter */
+				      RXCR1_RXFCE | /* enable flow control */
+				      RXCR1_RXBE | /* broadcast enable */
+				      RXCR1_RXUE | /* unicast enable */
+				      RXCR1_RXE)); /* enable rx block */
+
+	/* transfer entire frames out in one go */
+	ks8851_wrreg16(ks, KS_RXCR2, RXCR2_SRDBL_FRAME);
+
+	/* set receive counter timeouts */
+	ks8851_wrreg16(ks, KS_RXDTTR, 1000); /* 1ms after first frame to IRQ */
+	ks8851_wrreg16(ks, KS_RXDBCTR, 4096); /* >4Kbytes in buffer to IRQ */
+	ks8851_wrreg16(ks, KS_RXFCTR, 10);  /* 10 frames to IRQ */
+
+	ks->rc_rxqcr = (RXQCR_RXFCTE |  /* IRQ on frame count exceeded */
+			RXQCR_RXDBCTE | /* IRQ on byte count exceeded */
+			RXQCR_RXDTTE);  /* IRQ on time exceeded */
+
+	ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+
+	/* clear then enable interrupts */
+
+#define STD_IRQ (IRQ_LCI |	/* Link Change */	\
+		 IRQ_TXI |	/* TX done */		\
+		 IRQ_RXI |	/* RX done */		\
+		 IRQ_SPIBEI |	/* SPI bus error */	\
+		 IRQ_TXPSI |	/* TX process stop */	\
+		 IRQ_RXPSI)	/* RX process stop */
+
+	ks->rc_ier = STD_IRQ;
+	ks8851_wrreg16(ks, KS_ISR, STD_IRQ);
+	ks8851_wrreg16(ks, KS_IER, STD_IRQ);
+
+	netif_start_queue(ks->netdev);
+
+	if (netif_msg_ifup(ks))
+		ks_dbg(ks, "network device %s up\n", dev->name);
+
+	mutex_unlock(&ks->lock);
+	return 0;
+}
+
+/**
+ * ks8851_net_stop - close network device
+ * @dev: The device being closed.
+ *
+ * Called to close down a network device which has been active. Cancell any
+ * work, shutdown the RX and TX process and then place the chip into a low
+ * power state whilst it is not being used.
+ */
+static int ks8851_net_stop(struct net_device *dev)
+{
+	struct ks8851_net *ks = netdev_priv(dev);
+
+	if (netif_msg_ifdown(ks))
+		ks_info(ks, "%s: shutting down\n", dev->name);
+
+	netif_stop_queue(dev);
+
+	mutex_lock(&ks->lock);
+
+	/* stop any outstanding work */
+	flush_work(&ks->irq_work);
+	flush_work(&ks->tx_work);
+	flush_work(&ks->rxctrl_work);
+
+	/* turn off the IRQs and ack any outstanding */
+	ks8851_wrreg16(ks, KS_IER, 0x0000);
+	ks8851_wrreg16(ks, KS_ISR, 0xffff);
+
+	/* shutdown RX process */
+	ks8851_wrreg16(ks, KS_RXCR1, 0x0000);
+
+	/* shutdown TX process */
+	ks8851_wrreg16(ks, KS_TXCR, 0x0000);
+
+	/* set powermode to soft power down to save power */
+	ks8851_set_powermode(ks, PMECR_PM_SOFTDOWN);
+
+	/* ensure any queued tx buffers are dumped */
+	while (!skb_queue_empty(&ks->txq)) {
+		struct sk_buff *txb = skb_dequeue(&ks->txq);
+
+		if (netif_msg_ifdown(ks))
+			ks_dbg(ks, "%s: freeing txb %p\n", __func__, txb);
+
+		dev_kfree_skb(txb);
+	}
+
+	mutex_unlock(&ks->lock);
+	return 0;
+}
+
+/**
+ * ks8851_start_xmit - transmit packet
+ * @skb: The buffer to transmit
+ * @dev: The device used to transmit the packet.
+ *
+ * Called by the network layer to transmit the @skb. Queue the packet for
+ * the device and schedule the necessary work to transmit the packet when
+ * it is free.
+ *
+ * We do this to firstly avoid sleeping with the network device locked,
+ * and secondly so we can round up more than one packet to transmit which
+ * means we can try and avoid generating too many transmit done interrupts.
+ */
+static int ks8851_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct ks8851_net *ks = netdev_priv(dev);
+	unsigned needed = calc_txlen(skb->len);
+	int ret = NETDEV_TX_OK;
+
+	if (netif_msg_tx_queued(ks))
+		ks_dbg(ks, "%s: skb %p, %d@%p\n", __func__,
+		       skb, skb->len, skb->data);
+
+	spin_lock(&ks->statelock);
+
+	if (needed > ks->tx_space) {
+		netif_stop_queue(dev);
+		ret = NETDEV_TX_BUSY;
+	} else {
+		ks->tx_space -= needed;
+		skb_queue_tail(&ks->txq, skb);
+	}
+
+	spin_unlock(&ks->statelock);
+	schedule_work(&ks->tx_work);
+
+	return ret;
+}
+
+/**
+ * ks8851_rxctrl_work - work handler to change rx mode
+ * @work: The work structure this belongs to.
+ *
+ * Lock the device and issue the necessary changes to the receive mode from
+ * the network device layer. This is done so that we can do this without
+ * having to sleep whilst holding the network device lock.
+ *
+ * Since the recommendation from Micrel is that the RXQ is shutdown whilst the
+ * receive parameters are programmed, we issue a write to disable the RXQ and
+ * then wait for the interrupt handler to be triggered once the RXQ shutdown is
+ * complete. The interrupt handler then writes the new values into the chip.
+ */
+static void ks8851_rxctrl_work(struct work_struct *work)
+{
+	struct ks8851_net *ks = container_of(work, struct ks8851_net, rxctrl_work);
+
+	mutex_lock(&ks->lock);
+
+	/* need to shutdown RXQ before modifying filter parameters */
+	ks8851_wrreg16(ks, KS_RXCR1, 0x00);
+
+	mutex_unlock(&ks->lock);
+}
+
+static void ks8851_set_rx_mode(struct net_device *dev)
+{
+	struct ks8851_net *ks = netdev_priv(dev);
+	struct ks8851_rxctrl rxctrl;
+
+	memset(&rxctrl, 0, sizeof(rxctrl));
+
+	if (dev->flags & IFF_PROMISC) {
+		/* interface to receive everything */
+
+		rxctrl.rxcr1 = RXCR1_RXAE | RXCR1_RXINVF;
+	} else if (dev->flags & IFF_ALLMULTI) {
+		/* accept all multicast packets */
+
+		rxctrl.rxcr1 = (RXCR1_RXME | RXCR1_RXAE |
+				RXCR1_RXPAFMA | RXCR1_RXMAFMA);
+	} else if (dev->flags & IFF_MULTICAST && dev->mc_count > 0) {
+		struct dev_mc_list *mcptr = dev->mc_list;
+		u32 crc;
+		int i;
+
+		/* accept some multicast */
+
+		for (i = dev->mc_count; i > 0; i--) {
+			crc = ether_crc(ETH_ALEN, mcptr->dmi_addr);
+			crc >>= (32 - 6);  /* get top six bits */
+
+			rxctrl.mchash[crc >> 4] |= (1 << (crc & 0xf));
+			mcptr = mcptr->next;
+		}
+
+		rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXAE | RXCR1_RXPAFMA;
+	} else {
+		/* just accept broadcast / unicast */
+		rxctrl.rxcr1 = RXCR1_RXPAFMA;
+	}
+
+	rxctrl.rxcr1 |= (RXCR1_RXUE | /* unicast enable */
+			 RXCR1_RXBE | /* broadcast enable */
+			 RXCR1_RXE | /* RX process enable */
+			 RXCR1_RXFCE); /* enable flow control */
+
+	rxctrl.rxcr2 |= RXCR2_SRDBL_FRAME;
+
+	/* schedule work to do the actual set of the data if needed */
+
+	spin_lock(&ks->statelock);
+
+	if (memcmp(&rxctrl, &ks->rxctrl, sizeof(rxctrl)) != 0) {
+		memcpy(&ks->rxctrl, &rxctrl, sizeof(ks->rxctrl));
+		schedule_work(&ks->rxctrl_work);
+	}
+
+	spin_unlock(&ks->statelock);
+}
+
+static int ks8851_set_mac_address(struct net_device *dev, void *addr)
+{
+	struct sockaddr *sa = addr;
+
+	if (netif_running(dev))
+		return -EBUSY;
+
+	if (!is_valid_ether_addr(sa->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN);
+	return ks8851_write_mac_addr(dev);
+}
+
+static int ks8851_net_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+	struct ks8851_net *ks = netdev_priv(dev);
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	return generic_mii_ioctl(&ks->mii, if_mii(req), cmd, NULL);
+}
+
+static const struct net_device_ops ks8851_netdev_ops = {
+	.ndo_open		= ks8851_net_open,
+	.ndo_stop		= ks8851_net_stop,
+	.ndo_do_ioctl		= ks8851_net_ioctl,
+	.ndo_start_xmit		= ks8851_start_xmit,
+	.ndo_set_mac_address	= ks8851_set_mac_address,
+	.ndo_set_rx_mode	= ks8851_set_rx_mode,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+/* ethtool support */
+
+static void ks8851_get_drvinfo(struct net_device *dev,
+			       struct ethtool_drvinfo *di)
+{
+	strlcpy(di->driver, "KS8851", sizeof(di->driver));
+	strlcpy(di->version, "1.00", sizeof(di->version));
+	strlcpy(di->bus_info, dev_name(dev->dev.parent), sizeof(di->bus_info));
+}
+
+static u32 ks8851_get_msglevel(struct net_device *dev)
+{
+	struct ks8851_net *ks = netdev_priv(dev);
+	return ks->msg_enable;
+}
+
+static void ks8851_set_msglevel(struct net_device *dev, u32 to)
+{
+	struct ks8851_net *ks = netdev_priv(dev);
+	ks->msg_enable = to;
+}
+
+static int ks8851_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct ks8851_net *ks = netdev_priv(dev);
+	return mii_ethtool_gset(&ks->mii, cmd);
+}
+
+static int ks8851_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct ks8851_net *ks = netdev_priv(dev);
+	return mii_ethtool_sset(&ks->mii, cmd);
+}
+
+static u32 ks8851_get_link(struct net_device *dev)
+{
+	struct ks8851_net *ks = netdev_priv(dev);
+	return mii_link_ok(&ks->mii);
+}
+
+static int ks8851_nway_reset(struct net_device *dev)
+{
+	struct ks8851_net *ks = netdev_priv(dev);
+	return mii_nway_restart(&ks->mii);
+}
+
+static const struct ethtool_ops ks8851_ethtool_ops = {
+	.get_drvinfo	= ks8851_get_drvinfo,
+	.get_msglevel	= ks8851_get_msglevel,
+	.set_msglevel	= ks8851_set_msglevel,
+	.get_settings	= ks8851_get_settings,
+	.set_settings	= ks8851_set_settings,
+	.get_link	= ks8851_get_link,
+	.nway_reset	= ks8851_nway_reset,
+};
+
+/* MII interface controls */
+
+/**
+ * ks8851_phy_reg - convert MII register into a KS8851 register
+ * @reg: MII register number.
+ *
+ * Return the KS8851 register number for the corresponding MII PHY register
+ * if possible. Return zero if the MII register has no direct mapping to the
+ * KS8851 register set.
+ */
+static int ks8851_phy_reg(int reg)
+{
+	switch (reg) {
+	case MII_BMCR:
+		return KS_P1MBCR;
+	case MII_BMSR:
+		return KS_P1MBSR;
+	case MII_PHYSID1:
+		return KS_PHY1ILR;
+	case MII_PHYSID2:
+		return KS_PHY1IHR;
+	case MII_ADVERTISE:
+		return KS_P1ANAR;
+	case MII_LPA:
+		return KS_P1ANLPR;
+	}
+
+	return 0x0;
+}
+
+/**
+ * ks8851_phy_read - MII interface PHY register read.
+ * @dev: The network device the PHY is on.
+ * @phy_addr: Address of PHY (ignored as we only have one)
+ * @reg: The register to read.
+ *
+ * This call reads data from the PHY register specified in @reg. Since the
+ * device does not support all the MII registers, the non-existant values
+ * are always returned as zero.
+ *
+ * We return zero for unsupported registers as the MII code does not check
+ * the value returned for any error status, and simply returns it to the
+ * caller. The mii-tool that the driver was tested with takes any -ve error
+ * as real PHY capabilities, thus displaying incorrect data to the user.
+ */
+static int ks8851_phy_read(struct net_device *dev, int phy_addr, int reg)
+{
+	struct ks8851_net *ks = netdev_priv(dev);
+	int ksreg;
+	int result;
+
+	ksreg = ks8851_phy_reg(reg);
+	if (!ksreg)
+		return 0x0;	/* no error return allowed, so use zero */
+
+	mutex_lock(&ks->lock);
+	result = ks8851_rdreg16(ks, ksreg);
+	mutex_unlock(&ks->lock);
+
+	return result;
+}
+
+static void ks8851_phy_write(struct net_device *dev,
+			     int phy, int reg, int value)
+{
+	struct ks8851_net *ks = netdev_priv(dev);
+	int ksreg;
+
+	ksreg = ks8851_phy_reg(reg);
+	if (ksreg) {
+		mutex_lock(&ks->lock);
+		ks8851_wrreg16(ks, ksreg, value);
+		mutex_unlock(&ks->lock);
+	}
+}
+
+/**
+ * ks8851_read_selftest - read the selftest memory info.
+ * @ks: The device state
+ *
+ * Read and check the TX/RX memory selftest information.
+ */
+static int ks8851_read_selftest(struct ks8851_net *ks)
+{
+	unsigned both_done = MBIR_TXMBF | MBIR_RXMBF;
+	int ret = 0;
+	unsigned rd;
+
+	rd = ks8851_rdreg16(ks, KS_MBIR);
+
+	if ((rd & both_done) != both_done) {
+		ks_warn(ks, "Memory selftest not finished\n");
+		return 0;
+	}
+
+	if (rd & MBIR_TXMBFA) {
+		ks_err(ks, "TX memory selftest fail\n");
+		ret |= 1;
+	}
+
+	if (rd & MBIR_RXMBFA) {
+		ks_err(ks, "RX memory selftest fail\n");
+		ret |= 2;
+	}
+
+	return 0;
+}
+
+/* driver bus management functions */
+
+static int __devinit ks8851_probe(struct spi_device *spi)
+{
+	struct net_device *ndev;
+	struct ks8851_net *ks;
+	int ret;
+
+	ndev = alloc_etherdev(sizeof(struct ks8851_net));
+	if (!ndev) {
+		dev_err(&spi->dev, "failed to alloc ethernet device\n");
+		return -ENOMEM;
+	}
+
+	spi->bits_per_word = 8;
+
+	ks = netdev_priv(ndev);
+
+	ks->netdev = ndev;
+	ks->spidev = spi;
+	ks->tx_space = 6144;
+
+	mutex_init(&ks->lock);
+	spin_lock_init(&ks->statelock);
+
+	INIT_WORK(&ks->tx_work, ks8851_tx_work);
+	INIT_WORK(&ks->irq_work, ks8851_irq_work);
+	INIT_WORK(&ks->rxctrl_work, ks8851_rxctrl_work);
+
+	/* initialise pre-made spi transfer messages */
+
+	spi_message_init(&ks->spi_msg1);
+	spi_message_add_tail(&ks->spi_xfer1, &ks->spi_msg1);
+
+	spi_message_init(&ks->spi_msg2);
+	spi_message_add_tail(&ks->spi_xfer2[0], &ks->spi_msg2);
+	spi_message_add_tail(&ks->spi_xfer2[1], &ks->spi_msg2);
+
+	/* setup mii state */
+	ks->mii.dev		= ndev;
+	ks->mii.phy_id		= 1,
+	ks->mii.phy_id_mask	= 1;
+	ks->mii.reg_num_mask	= 0xf;
+	ks->mii.mdio_read	= ks8851_phy_read;
+	ks->mii.mdio_write	= ks8851_phy_write;
+
+	dev_info(&spi->dev, "message enable is %d\n", msg_enable);
+
+	/* set the default message enable */
+	ks->msg_enable = netif_msg_init(msg_enable, (NETIF_MSG_DRV |
+						     NETIF_MSG_PROBE |
+						     NETIF_MSG_LINK));
+
+	skb_queue_head_init(&ks->txq);
+
+	SET_ETHTOOL_OPS(ndev, &ks8851_ethtool_ops);
+	SET_NETDEV_DEV(ndev, &spi->dev);
+
+	dev_set_drvdata(&spi->dev, ks);
+
+	ndev->if_port = IF_PORT_100BASET;
+	ndev->netdev_ops = &ks8851_netdev_ops;
+	ndev->irq = spi->irq;
+
+	/* simple check for a valid chip being connected to the bus */
+
+	if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) {
+		dev_err(&spi->dev, "failed to read device ID\n");
+		ret = -ENODEV;
+		goto err_id;
+	}
+
+	ks8851_read_selftest(ks);
+	ks8851_init_mac(ks);
+
+	ret = request_irq(spi->irq, ks8851_irq, IRQF_TRIGGER_LOW,
+			  ndev->name, ks);
+	if (ret < 0) {
+		dev_err(&spi->dev, "failed to get irq\n");
+		goto err_irq;
+	}
+
+	ret = register_netdev(ndev);
+	if (ret) {
+		dev_err(&spi->dev, "failed to register network device\n");
+		goto err_netdev;
+	}
+
+	dev_info(&spi->dev, "revision %d, MAC %pM, IRQ %d\n",
+		 CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)),
+		 ndev->dev_addr, ndev->irq);
+
+	return 0;
+
+
+err_netdev:
+	free_irq(ndev->irq, ndev);
+
+err_id:
+err_irq:
+	free_netdev(ndev);
+	return ret;
+}
+
+static int __devexit ks8851_remove(struct spi_device *spi)
+{
+	struct ks8851_net *priv = dev_get_drvdata(&spi->dev);
+
+	if (netif_msg_drv(priv))
+		dev_info(&spi->dev, "remove");
+
+	unregister_netdev(priv->netdev);
+	free_irq(spi->irq, priv);
+	free_netdev(priv->netdev);
+
+	return 0;
+}
+
+static struct spi_driver ks8851_driver = {
+	.driver = {
+		.name = "ks8851",
+		.owner = THIS_MODULE,
+	},
+	.probe = ks8851_probe,
+	.remove = __devexit_p(ks8851_remove),
+};
+
+static int __init ks8851_init(void)
+{
+	return spi_register_driver(&ks8851_driver);
+}
+
+static void __exit ks8851_exit(void)
+{
+	spi_unregister_driver(&ks8851_driver);
+}
+
+module_init(ks8851_init);
+module_exit(ks8851_exit);
+
+MODULE_DESCRIPTION("KS8851 Network driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+
+module_param_named(message, msg_enable, int, 0);
+MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)");
diff --git a/drivers/net/ks8851.h b/drivers/net/ks8851.h
new file mode 100644
index 00000000000..85abe147afb
--- /dev/null
+++ b/drivers/net/ks8851.h
@@ -0,0 +1,296 @@
+/* drivers/net/ks8851.h
+ *
+ * Copyright 2009 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8851 register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define KS_CCR					0x08
+#define CCR_EEPROM				(1 << 9)
+#define CCR_SPI					(1 << 8)
+#define CCR_32PIN				(1 << 0)
+
+/* MAC address registers */
+#define KS_MARL					0x10
+#define KS_MARM					0x12
+#define KS_MARH					0x14
+
+#define KS_OBCR					0x20
+#define OBCR_ODS_16mA				(1 << 6)
+
+#define KS_EEPCR				0x22
+#define EEPCR_EESA				(1 << 4)
+#define EEPCR_EESB				(1 << 3)
+#define EEPCR_EEDO				(1 << 2)
+#define EEPCR_EESCK				(1 << 1)
+#define EEPCR_EECS				(1 << 0)
+
+#define KS_MBIR					0x24
+#define MBIR_TXMBF				(1 << 12)
+#define MBIR_TXMBFA				(1 << 11)
+#define MBIR_RXMBF				(1 << 4)
+#define MBIR_RXMBFA				(1 << 3)
+
+#define KS_GRR					0x26
+#define GRR_QMU					(1 << 1)
+#define GRR_GSR					(1 << 0)
+
+#define KS_WFCR					0x2A
+#define WFCR_MPRXE				(1 << 7)
+#define WFCR_WF3E				(1 << 3)
+#define WFCR_WF2E				(1 << 2)
+#define WFCR_WF1E				(1 << 1)
+#define WFCR_WF0E				(1 << 0)
+
+#define KS_WF0CRC0				0x30
+#define KS_WF0CRC1				0x32
+#define KS_WF0BM0				0x34
+#define KS_WF0BM1				0x36
+#define KS_WF0BM2				0x38
+#define KS_WF0BM3				0x3A
+
+#define KS_WF1CRC0				0x40
+#define KS_WF1CRC1				0x42
+#define KS_WF1BM0				0x44
+#define KS_WF1BM1				0x46
+#define KS_WF1BM2				0x48
+#define KS_WF1BM3				0x4A
+
+#define KS_WF2CRC0				0x50
+#define KS_WF2CRC1				0x52
+#define KS_WF2BM0				0x54
+#define KS_WF2BM1				0x56
+#define KS_WF2BM2				0x58
+#define KS_WF2BM3				0x5A
+
+#define KS_WF3CRC0				0x60
+#define KS_WF3CRC1				0x62
+#define KS_WF3BM0				0x64
+#define KS_WF3BM1				0x66
+#define KS_WF3BM2				0x68
+#define KS_WF3BM3				0x6A
+
+#define KS_TXCR					0x70
+#define TXCR_TCGICMP				(1 << 8)
+#define TXCR_TCGUDP				(1 << 7)
+#define TXCR_TCGTCP				(1 << 6)
+#define TXCR_TCGIP				(1 << 5)
+#define TXCR_FTXQ				(1 << 4)
+#define TXCR_TXFCE				(1 << 3)
+#define TXCR_TXPE				(1 << 2)
+#define TXCR_TXCRC				(1 << 1)
+#define TXCR_TXE				(1 << 0)
+
+#define KS_TXSR					0x72
+#define TXSR_TXLC				(1 << 13)
+#define TXSR_TXMC				(1 << 12)
+#define TXSR_TXFID_MASK				(0x3f << 0)
+#define TXSR_TXFID_SHIFT			(0)
+#define TXSR_TXFID_GET(_v)			(((_v) >> 0) & 0x3f)
+
+#define KS_RXCR1				0x74
+#define RXCR1_FRXQ				(1 << 15)
+#define RXCR1_RXUDPFCC				(1 << 14)
+#define RXCR1_RXTCPFCC				(1 << 13)
+#define RXCR1_RXIPFCC				(1 << 12)
+#define RXCR1_RXPAFMA				(1 << 11)
+#define RXCR1_RXFCE				(1 << 10)
+#define RXCR1_RXEFE				(1 << 9)
+#define RXCR1_RXMAFMA				(1 << 8)
+#define RXCR1_RXBE				(1 << 7)
+#define RXCR1_RXME				(1 << 6)
+#define RXCR1_RXUE				(1 << 5)
+#define RXCR1_RXAE				(1 << 4)
+#define RXCR1_RXINVF				(1 << 1)
+#define RXCR1_RXE				(1 << 0)
+
+#define KS_RXCR2				0x76
+#define RXCR2_SRDBL_MASK			(0x7 << 5)
+#define RXCR2_SRDBL_SHIFT			(5)
+#define RXCR2_SRDBL_4B				(0x0 << 5)
+#define RXCR2_SRDBL_8B				(0x1 << 5)
+#define RXCR2_SRDBL_16B				(0x2 << 5)
+#define RXCR2_SRDBL_32B				(0x3 << 5)
+#define RXCR2_SRDBL_FRAME			(0x4 << 5)
+#define RXCR2_IUFFP				(1 << 4)
+#define RXCR2_RXIUFCEZ				(1 << 3)
+#define RXCR2_UDPLFE				(1 << 2)
+#define RXCR2_RXICMPFCC				(1 << 1)
+#define RXCR2_RXSAF				(1 << 0)
+
+#define KS_TXMIR				0x78
+
+#define KS_RXFHSR				0x7C
+#define RXFSHR_RXFV				(1 << 15)
+#define RXFSHR_RXICMPFCS			(1 << 13)
+#define RXFSHR_RXIPFCS				(1 << 12)
+#define RXFSHR_RXTCPFCS				(1 << 11)
+#define RXFSHR_RXUDPFCS				(1 << 10)
+#define RXFSHR_RXBF				(1 << 7)
+#define RXFSHR_RXMF				(1 << 6)
+#define RXFSHR_RXUF				(1 << 5)
+#define RXFSHR_RXMR				(1 << 4)
+#define RXFSHR_RXFT				(1 << 3)
+#define RXFSHR_RXFTL				(1 << 2)
+#define RXFSHR_RXRF				(1 << 1)
+#define RXFSHR_RXCE				(1 << 0)
+
+#define KS_RXFHBCR				0x7E
+#define KS_TXQCR				0x80
+#define TXQCR_AETFE				(1 << 2)
+#define TXQCR_TXQMAM				(1 << 1)
+#define TXQCR_METFE				(1 << 0)
+
+#define KS_RXQCR				0x82
+#define RXQCR_RXDTTS				(1 << 12)
+#define RXQCR_RXDBCTS				(1 << 11)
+#define RXQCR_RXFCTS				(1 << 10)
+#define RXQCR_RXIPHTOE				(1 << 9)
+#define RXQCR_RXDTTE				(1 << 7)
+#define RXQCR_RXDBCTE				(1 << 6)
+#define RXQCR_RXFCTE				(1 << 5)
+#define RXQCR_ADRFE				(1 << 4)
+#define RXQCR_SDA				(1 << 3)
+#define RXQCR_RRXEF				(1 << 0)
+
+#define KS_TXFDPR				0x84
+#define TXFDPR_TXFPAI				(1 << 14)
+#define TXFDPR_TXFP_MASK			(0x7ff << 0)
+#define TXFDPR_TXFP_SHIFT			(0)
+
+#define KS_RXFDPR				0x86
+#define RXFDPR_RXFPAI				(1 << 14)
+
+#define KS_RXDTTR				0x8C
+#define KS_RXDBCTR				0x8E
+
+#define KS_IER					0x90
+#define KS_ISR					0x92
+#define IRQ_LCI					(1 << 15)
+#define IRQ_TXI					(1 << 14)
+#define IRQ_RXI					(1 << 13)
+#define IRQ_RXOI				(1 << 11)
+#define IRQ_TXPSI				(1 << 9)
+#define IRQ_RXPSI				(1 << 8)
+#define IRQ_TXSAI				(1 << 6)
+#define IRQ_RXWFDI				(1 << 5)
+#define IRQ_RXMPDI				(1 << 4)
+#define IRQ_LDI					(1 << 3)
+#define IRQ_EDI					(1 << 2)
+#define IRQ_SPIBEI				(1 << 1)
+#define IRQ_DEDI				(1 << 0)
+
+#define KS_RXFCTR				0x9C
+#define KS_RXFC					0x9D
+#define RXFCTR_RXFC_MASK			(0xff << 8)
+#define RXFCTR_RXFC_SHIFT			(8)
+#define RXFCTR_RXFC_GET(_v)			(((_v) >> 8) & 0xff)
+#define RXFCTR_RXFCT_MASK			(0xff << 0)
+#define RXFCTR_RXFCT_SHIFT			(0)
+
+#define KS_TXNTFSR				0x9E
+
+#define KS_MAHTR0				0xA0
+#define KS_MAHTR1				0xA2
+#define KS_MAHTR2				0xA4
+#define KS_MAHTR3				0xA6
+
+#define KS_FCLWR				0xB0
+#define KS_FCHWR				0xB2
+#define KS_FCOWR				0xB4
+
+#define KS_CIDER				0xC0
+#define CIDER_ID				0x8870
+#define CIDER_REV_MASK				(0x7 << 1)
+#define CIDER_REV_SHIFT				(1)
+#define CIDER_REV_GET(_v)			(((_v) >> 1) & 0x7)
+
+#define KS_CGCR					0xC6
+
+#define KS_IACR					0xC8
+#define IACR_RDEN				(1 << 12)
+#define IACR_TSEL_MASK				(0x3 << 10)
+#define IACR_TSEL_SHIFT				(10)
+#define IACR_TSEL_MIB				(0x3 << 10)
+#define IACR_ADDR_MASK				(0x1f << 0)
+#define IACR_ADDR_SHIFT				(0)
+
+#define KS_IADLR				0xD0
+#define KS_IAHDR				0xD2
+
+#define KS_PMECR				0xD4
+#define PMECR_PME_DELAY				(1 << 14)
+#define PMECR_PME_POL				(1 << 12)
+#define PMECR_WOL_WAKEUP			(1 << 11)
+#define PMECR_WOL_MAGICPKT			(1 << 10)
+#define PMECR_WOL_LINKUP			(1 << 9)
+#define PMECR_WOL_ENERGY			(1 << 8)
+#define PMECR_AUTO_WAKE_EN			(1 << 7)
+#define PMECR_WAKEUP_NORMAL			(1 << 6)
+#define PMECR_WKEVT_MASK			(0xf << 2)
+#define PMECR_WKEVT_SHIFT			(2)
+#define PMECR_WKEVT_GET(_v)			(((_v) >> 2) & 0xf)
+#define PMECR_WKEVT_ENERGY			(0x1 << 2)
+#define PMECR_WKEVT_LINK			(0x2 << 2)
+#define PMECR_WKEVT_MAGICPKT			(0x4 << 2)
+#define PMECR_WKEVT_FRAME			(0x8 << 2)
+#define PMECR_PM_MASK				(0x3 << 0)
+#define PMECR_PM_SHIFT				(0)
+#define PMECR_PM_NORMAL				(0x0 << 0)
+#define PMECR_PM_ENERGY				(0x1 << 0)
+#define PMECR_PM_SOFTDOWN			(0x2 << 0)
+#define PMECR_PM_POWERSAVE			(0x3 << 0)
+
+/* Standard MII PHY data */
+#define KS_P1MBCR				0xE4
+#define KS_P1MBSR				0xE6
+#define KS_PHY1ILR				0xE8
+#define KS_PHY1IHR				0xEA
+#define KS_P1ANAR				0xEC
+#define KS_P1ANLPR				0xEE
+
+#define KS_P1SCLMD				0xF4
+#define P1SCLMD_LEDOFF				(1 << 15)
+#define P1SCLMD_TXIDS				(1 << 14)
+#define P1SCLMD_RESTARTAN			(1 << 13)
+#define P1SCLMD_DISAUTOMDIX			(1 << 10)
+#define P1SCLMD_FORCEMDIX			(1 << 9)
+#define P1SCLMD_AUTONEGEN			(1 << 7)
+#define P1SCLMD_FORCE100			(1 << 6)
+#define P1SCLMD_FORCEFDX			(1 << 5)
+#define P1SCLMD_ADV_FLOW			(1 << 4)
+#define P1SCLMD_ADV_100BT_FDX			(1 << 3)
+#define P1SCLMD_ADV_100BT_HDX			(1 << 2)
+#define P1SCLMD_ADV_10BT_FDX			(1 << 1)
+#define P1SCLMD_ADV_10BT_HDX			(1 << 0)
+
+#define KS_P1CR					0xF6
+#define P1CR_HP_MDIX				(1 << 15)
+#define P1CR_REV_POL				(1 << 13)
+#define P1CR_OP_100M				(1 << 10)
+#define P1CR_OP_FDX				(1 << 9)
+#define P1CR_OP_MDI				(1 << 7)
+#define P1CR_AN_DONE				(1 << 6)
+#define P1CR_LINK_GOOD				(1 << 5)
+#define P1CR_PNTR_FLOW				(1 << 4)
+#define P1CR_PNTR_100BT_FDX			(1 << 3)
+#define P1CR_PNTR_100BT_HDX			(1 << 2)
+#define P1CR_PNTR_10BT_FDX			(1 << 1)
+#define P1CR_PNTR_10BT_HDX			(1 << 0)
+
+/* TX Frame control */
+
+#define TXFR_TXIC				(1 << 15)
+#define TXFR_TXFID_MASK				(0x3f << 0)
+#define TXFR_TXFID_SHIFT			(0)
+
+/* SPI frame opcodes */
+#define KS_SPIOP_RD				(0x00)
+#define KS_SPIOP_WR				(0x40)
+#define KS_SPIOP_RXFIFO				(0x80)
+#define KS_SPIOP_TXFIFO				(0xC0)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 5b5c25368d1..e3601cf3f93 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -620,6 +620,7 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	dma_addr_t mapping;
 	unsigned int len, entry;
 	u32 ctrl;
+	unsigned long flags;
 
 #ifdef DEBUG
 	int i;
@@ -635,12 +636,12 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 
 	len = skb->len;
-	spin_lock_irq(&bp->lock);
+	spin_lock_irqsave(&bp->lock, flags);
 
 	/* This is a hard error, log it. */
 	if (TX_BUFFS_AVAIL(bp) < 1) {
 		netif_stop_queue(dev);
-		spin_unlock_irq(&bp->lock);
+		spin_unlock_irqrestore(&bp->lock, flags);
 		dev_err(&bp->pdev->dev,
 			"BUG! Tx Ring full when queue awake!\n");
 		dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n",
@@ -674,7 +675,7 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (TX_BUFFS_AVAIL(bp) < 1)
 		netif_stop_queue(dev);
 
-	spin_unlock_irq(&bp->lock);
+	spin_unlock_irqrestore(&bp->lock, flags);
 
 	dev->trans_start = jiffies;
 
diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c
index acd143da161..61eabcac734 100644
--- a/drivers/net/macsonic.c
+++ b/drivers/net/macsonic.c
@@ -179,7 +179,7 @@ static const struct net_device_ops macsonic_netdev_ops = {
 	.ndo_set_mac_address	= eth_mac_addr,
 };
 
-static int __init macsonic_init(struct net_device *dev)
+static int __devinit macsonic_init(struct net_device *dev)
 {
 	struct sonic_local* lp = netdev_priv(dev);
 
@@ -223,7 +223,7 @@ static int __init macsonic_init(struct net_device *dev)
 	return 0;
 }
 
-static int __init mac_onboard_sonic_ethernet_addr(struct net_device *dev)
+static int __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev)
 {
 	struct sonic_local *lp = netdev_priv(dev);
 	const int prom_addr = ONBOARD_SONIC_PROM_BASE;
@@ -288,7 +288,7 @@ static int __init mac_onboard_sonic_ethernet_addr(struct net_device *dev)
 	} else return 0;
 }
 
-static int __init mac_onboard_sonic_probe(struct net_device *dev)
+static int __devinit mac_onboard_sonic_probe(struct net_device *dev)
 {
 	/* Bwahahaha */
 	static int once_is_more_than_enough;
@@ -409,7 +409,7 @@ static int __init mac_onboard_sonic_probe(struct net_device *dev)
 	return macsonic_init(dev);
 }
 
-static int __init mac_nubus_sonic_ethernet_addr(struct net_device *dev,
+static int __devinit mac_nubus_sonic_ethernet_addr(struct net_device *dev,
 						unsigned long prom_addr,
 						int id)
 {
@@ -424,7 +424,7 @@ static int __init mac_nubus_sonic_ethernet_addr(struct net_device *dev,
 	return 0;
 }
 
-static int __init macsonic_ident(struct nubus_dev *ndev)
+static int __devinit macsonic_ident(struct nubus_dev *ndev)
 {
 	if (ndev->dr_hw == NUBUS_DRHW_ASANTE_LC &&
 	    ndev->dr_sw == NUBUS_DRSW_SONIC_LC)
@@ -449,7 +449,7 @@ static int __init macsonic_ident(struct nubus_dev *ndev)
 	return -1;
 }
 
-static int __init mac_nubus_sonic_probe(struct net_device *dev)
+static int __devinit mac_nubus_sonic_probe(struct net_device *dev)
 {
 	static int slots;
 	struct nubus_dev* ndev = NULL;
@@ -562,7 +562,7 @@ static int __init mac_nubus_sonic_probe(struct net_device *dev)
 	return macsonic_init(dev);
 }
 
-static int __init mac_sonic_probe(struct platform_device *pdev)
+static int __devinit mac_sonic_probe(struct platform_device *pdev)
 {
 	struct net_device *dev;
 	struct sonic_local *lp;
@@ -575,6 +575,7 @@ static int __init mac_sonic_probe(struct platform_device *pdev)
 	lp = netdev_priv(dev);
 	lp->device = &pdev->dev;
 	SET_NETDEV_DEV(dev, &pdev->dev);
+	platform_set_drvdata(pdev, dev);
 
 	/* This will catch fatal stuff like -ENOMEM as well as success */
 	err = mac_onboard_sonic_probe(dev);
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
index dc45e9856c3..6851bdb2ce2 100644
--- a/drivers/net/mdio.c
+++ b/drivers/net/mdio.c
@@ -14,6 +14,10 @@
 #include <linux/mdio.h>
 #include <linux/module.h>
 
+MODULE_DESCRIPTION("Generic support for MDIO-compatible transceivers");
+MODULE_AUTHOR("Copyright 2006-2009 Solarflare Communications Inc.");
+MODULE_LICENSE("GPL");
+
 /**
  * mdio45_probe - probe for an MDIO (clause 45) device
  * @mdio: MDIO interface
diff --git a/drivers/net/mlx4/cmd.c b/drivers/net/mlx4/cmd.c
index 2845a0560b8..65ec77dc31f 100644
--- a/drivers/net/mlx4/cmd.c
+++ b/drivers/net/mlx4/cmd.c
@@ -80,7 +80,9 @@ enum {
 	/* Bad management packet (silently discarded): */
 	CMD_STAT_BAD_PKT	= 0x30,
 	/* More outstanding CQEs in CQ than new CQ size: */
-	CMD_STAT_BAD_SIZE	= 0x40
+	CMD_STAT_BAD_SIZE	= 0x40,
+	/* Multi Function device support required: */
+	CMD_STAT_MULTI_FUNC_REQ	= 0x50,
 };
 
 enum {
@@ -128,6 +130,7 @@ static int mlx4_status_to_errno(u8 status)
 		[CMD_STAT_LAM_NOT_PRE]	  = -EAGAIN,
 		[CMD_STAT_BAD_PKT]	  = -EINVAL,
 		[CMD_STAT_BAD_SIZE]	  = -ENOMEM,
+		[CMD_STAT_MULTI_FUNC_REQ] = -EACCES,
 	};
 
 	if (status >= ARRAY_SIZE(trans_table) ||
diff --git a/drivers/net/mlx4/en_ethtool.c b/drivers/net/mlx4/en_ethtool.c
index 091f99052c9..86467b444ac 100644
--- a/drivers/net/mlx4/en_ethtool.c
+++ b/drivers/net/mlx4/en_ethtool.c
@@ -220,7 +220,7 @@ static int mlx4_en_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	cmd->autoneg = AUTONEG_DISABLE;
 	cmd->supported = SUPPORTED_10000baseT_Full;
-	cmd->advertising = SUPPORTED_10000baseT_Full;
+	cmd->advertising = ADVERTISED_1000baseT_Full;
 	if (netif_carrier_ok(dev)) {
 		cmd->speed = SPEED_10000;
 		cmd->duplex = DUPLEX_FULL;
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 91bdfdfd431..3ac0404d0d1 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -506,8 +506,9 @@ static int mlx4_en_complete_rx_desc(struct mlx4_en_priv *priv,
 				 PCI_DMA_FROMDEVICE);
 	}
 	/* Adjust size of last fragment to match actual length */
-	skb_frags_rx[nr - 1].size = length -
-		priv->frag_info[nr - 1].frag_prefix_size;
+	if (nr > 0)
+		skb_frags_rx[nr - 1].size = length -
+			priv->frag_info[nr - 1].frag_prefix_size;
 	return nr;
 
 fail:
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 08c43f2ae72..62208401c4d 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -249,6 +249,7 @@ static u32 mlx4_en_free_tx_desc(struct mlx4_en_priv *priv,
 				pci_unmap_page(mdev->pdev,
 					(dma_addr_t) be64_to_cpu(data->addr),
 					 frag->size, PCI_DMA_TODEVICE);
+				++data;
 			}
 		}
 		/* Stamp the freed descriptor */
@@ -436,6 +437,7 @@ static inline void mlx4_en_xmit_poll(struct mlx4_en_priv *priv, int tx_ind)
 {
 	struct mlx4_en_cq *cq = &priv->tx_cq[tx_ind];
 	struct mlx4_en_tx_ring *ring = &priv->tx_ring[tx_ind];
+	unsigned long flags;
 
 	/* If we don't have a pending timer, set one up to catch our recent
 	   post in case the interface becomes idle */
@@ -444,9 +446,9 @@ static inline void mlx4_en_xmit_poll(struct mlx4_en_priv *priv, int tx_ind)
 
 	/* Poll the CQ every mlx4_en_TX_MODER_POLL packets */
 	if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0)
-		if (spin_trylock_irq(&ring->comp_lock)) {
+		if (spin_trylock_irqsave(&ring->comp_lock, flags)) {
 			mlx4_en_process_tx_cq(priv->dev, cq);
-			spin_unlock_irq(&ring->comp_lock);
+			spin_unlock_irqrestore(&ring->comp_lock, flags);
 		}
 }
 
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 018348c0119..dac621b1e9f 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -729,7 +729,10 @@ static int mlx4_init_hca(struct mlx4_dev *dev)
 
 	err = mlx4_QUERY_FW(dev);
 	if (err) {
-		mlx4_err(dev, "QUERY_FW command failed, aborting.\n");
+		if (err == -EACCES)
+			mlx4_info(dev, "non-primary physical function, skipping.\n");
+		else
+			mlx4_err(dev, "QUERY_FW command failed, aborting.\n");
 		return err;
 	}
 
@@ -1285,6 +1288,7 @@ static struct pci_device_id mlx4_pci_table[] = {
 	{ PCI_VDEVICE(MELLANOX, 0x6750) }, /* MT25408 "Hermon" EN 10GigE PCIe gen2 */
 	{ PCI_VDEVICE(MELLANOX, 0x6372) }, /* MT25458 ConnectX EN 10GBASE-T 10GigE */
 	{ PCI_VDEVICE(MELLANOX, 0x675a) }, /* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */
+	{ PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/
 	{ 0, }
 };
 
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index c9bfe4eea18..78c088331f5 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -130,8 +130,8 @@ static int full_duplex[MAX_UNITS];
 static const char version[] __devinitconst =
   KERN_INFO DRV_NAME " dp8381x driver, version "
       DRV_VERSION ", " DRV_RELDATE "\n"
-  KERN_INFO "  originally by Donald Becker <becker@scyld.com>\n"
-  KERN_INFO "  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
+  "  originally by Donald Becker <becker@scyld.com>\n"
+  "  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
 
 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
 MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver");
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 5c3e242428f..992dbfffdb0 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -321,7 +321,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
 	}
 
 	if (ei_debug  &&  version_printed++ == 0)
-		printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2);
+		printk(KERN_INFO "%s%s", version1, version2);
 
 	printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr);
 
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 970cedeb5f3..a9c1fcca5e7 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -60,7 +60,18 @@
 #define _NETXEN_NIC_LINUX_SUBVERSION 30
 #define NETXEN_NIC_LINUX_VERSIONID  "4.0.30"
 
-#define NETXEN_VERSION_CODE(a, b, c)	(((a) << 16) + ((b) << 8) + (c))
+#define NETXEN_VERSION_CODE(a, b, c)	(((a) << 24) + ((b) << 16) + (c))
+#define _major(v)	(((v) >> 24) & 0xff)
+#define _minor(v)	(((v) >> 16) & 0xff)
+#define _build(v)	((v) & 0xffff)
+
+/* version in image has weird encoding:
+ *  7:0  - major
+ * 15:8  - minor
+ * 31:16 - build (little endian)
+ */
+#define NETXEN_DECODE_VERSION(v) \
+	NETXEN_VERSION_CODE(((v) & 0xff), (((v) >> 8) & 0xff), ((v) >> 16))
 
 #define NETXEN_NUM_FLASH_SECTORS (64)
 #define NETXEN_FLASH_SECTOR_SIZE (64 * 1024)
@@ -199,6 +210,7 @@
 #define NETXEN_CTX_SIGNATURE	0xdee0
 #define NETXEN_CTX_SIGNATURE_V2	0x0002dee0
 #define NETXEN_CTX_RESET	0xbad0
+#define NETXEN_CTX_D3_RESET	0xacc0
 #define NETXEN_RCV_PRODUCER(ringid)	(ringid)
 
 #define PHAN_PEG_RCV_INITIALIZED	0xff01
@@ -614,6 +626,7 @@ struct netxen_new_user_info {
 #define NX_P2_MN_ROMIMAGE	0
 #define NX_P3_CT_ROMIMAGE	1
 #define NX_P3_MN_ROMIMAGE	2
+#define NX_FLASH_ROMIMAGE	3
 
 #define NETXEN_USER_START_OLD NETXEN_PXE_START	/* for backward compatibility */
 
@@ -761,6 +774,8 @@ struct nx_host_tx_ring {
 	u32 crb_cmd_consumer;
 	u32 num_desc;
 
+	struct netdev_queue *txq;
+
 	struct netxen_cmd_buffer *cmd_buf_arr;
 	struct cmd_desc_type0 *desc_head;
 	dma_addr_t phys_addr;
@@ -1239,11 +1254,11 @@ struct netxen_adapter {
 	u8 mc_enabled;
 	u8 max_mc_count;
 	u8 rss_supported;
-	u8 resv2;
+	u8 link_changed;
 	u32 resv3;
 
 	u8 has_link_events;
-	u8 resv1;
+	u8 fw_type;
 	u16 tx_context_id;
 	u16 mtu;
 	u16 is_up;
@@ -1387,6 +1402,7 @@ void netxen_free_adapter_offload(struct netxen_adapter *adapter);
 int netxen_initialize_adapter_offload(struct netxen_adapter *adapter);
 int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val);
 int netxen_load_firmware(struct netxen_adapter *adapter);
+int netxen_need_fw_reset(struct netxen_adapter *adapter);
 void netxen_request_firmware(struct netxen_adapter *adapter);
 void netxen_release_firmware(struct netxen_adapter *adapter);
 int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index 4754f5cffad..9f8ae4719e2 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -684,10 +684,8 @@ int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
 			goto err_out_free;
 	} else {
 		err = netxen_init_old_ctx(adapter);
-		if (err) {
-			netxen_free_hw_resources(adapter);
-			return err;
-		}
+		if (err)
+			goto err_out_free;
 	}
 
 	return 0;
@@ -708,15 +706,18 @@ void netxen_free_hw_resources(struct netxen_adapter *adapter)
 	int port = adapter->portnum;
 
 	if (adapter->fw_major >= 4) {
-		nx_fw_cmd_destroy_tx_ctx(adapter);
 		nx_fw_cmd_destroy_rx_ctx(adapter);
+		nx_fw_cmd_destroy_tx_ctx(adapter);
 	} else {
 		netxen_api_lock(adapter);
 		NXWR32(adapter, CRB_CTX_SIGNATURE_REG(port),
-				NETXEN_CTX_RESET | port);
+				NETXEN_CTX_D3_RESET | port);
 		netxen_api_unlock(adapter);
 	}
 
+	/* Allow dma queues to drain after context reset */
+	msleep(20);
+
 	recv_ctx = &adapter->recv_ctx;
 
 	if (recv_ctx->hwctx != NULL) {
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 3cc047844af..82410367564 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -853,6 +853,7 @@ enum {
 #define NX_PEG_TUNE_CAPABILITY		(NETXEN_CAM_RAM(0x02c))
 
 #define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL		(0x14)
+#define NETXEN_PEG_ALIVE_COUNTER	(NETXEN_CAM_RAM(0xb0))
 
 #define	ISR_MSI_INT_TRIGGER(FUNC) (NETXEN_PCIX_PS_REG(PCIX_MSI_F(FUNC)))
 #define ISR_LEGACY_INT_TRIGGERED(VAL)	(((VAL) & 0x300) == 0x200)
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index ce3b89d2cbb..b9123d445c9 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -461,13 +461,14 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
 	i = 0;
 
 	tx_ring = adapter->tx_ring;
-	netif_tx_lock_bh(adapter->netdev);
+	__netif_tx_lock_bh(tx_ring->txq);
 
 	producer = tx_ring->producer;
 	consumer = tx_ring->sw_consumer;
 
-	if (nr_desc >= find_diff_among(producer, consumer, tx_ring->num_desc)) {
-		netif_tx_unlock_bh(adapter->netdev);
+	if (nr_desc >= netxen_tx_avail(tx_ring)) {
+		netif_tx_stop_queue(tx_ring->txq);
+		__netif_tx_unlock_bh(tx_ring->txq);
 		return -EBUSY;
 	}
 
@@ -490,7 +491,7 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
 
 	netxen_nic_update_cmd_producer(adapter, tx_ring);
 
-	netif_tx_unlock_bh(adapter->netdev);
+	__netif_tx_unlock_bh(tx_ring->txq);
 
 	return 0;
 }
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 055bb61d6e7..5d3343ef3d8 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -214,6 +214,7 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 	adapter->tx_ring = tx_ring;
 
 	tx_ring->num_desc = adapter->num_txd;
+	tx_ring->txq = netdev_get_tx_queue(netdev, 0);
 
 	cmd_buf_arr = vmalloc(TX_BUFF_RINGSIZE(tx_ring));
 	if (cmd_buf_arr == NULL) {
@@ -684,11 +685,84 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 }
 
 int
+netxen_need_fw_reset(struct netxen_adapter *adapter)
+{
+	u32 count, old_count;
+	u32 val, version, major, minor, build;
+	int i, timeout;
+	u8 fw_type;
+
+	/* NX2031 firmware doesn't support heartbit */
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+		return 1;
+
+	/* last attempt had failed */
+	if (NXRD32(adapter, CRB_CMDPEG_STATE) == PHAN_INITIALIZE_FAILED)
+		return 1;
+
+	old_count = count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+
+	for (i = 0; i < 10; i++) {
+
+		timeout = msleep_interruptible(200);
+		if (timeout) {
+			NXWR32(adapter, CRB_CMDPEG_STATE,
+					PHAN_INITIALIZE_FAILED);
+			return -EINTR;
+		}
+
+		count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+		if (count != old_count)
+			break;
+	}
+
+	/* firmware is dead */
+	if (count == old_count)
+		return 1;
+
+	/* check if we have got newer or different file firmware */
+	if (adapter->fw) {
+
+		const struct firmware *fw = adapter->fw;
+
+		val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
+		version = NETXEN_DECODE_VERSION(val);
+
+		major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
+		minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
+		build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
+
+		if (version > NETXEN_VERSION_CODE(major, minor, build))
+			return 1;
+
+		if (version == NETXEN_VERSION_CODE(major, minor, build)) {
+
+			val = NXRD32(adapter, NETXEN_MIU_MN_CONTROL);
+			fw_type = (val & 0x4) ?
+				NX_P3_CT_ROMIMAGE : NX_P3_MN_ROMIMAGE;
+
+			if (adapter->fw_type != fw_type)
+				return 1;
+		}
+	}
+
+	return 0;
+}
+
+static char *fw_name[] = {
+	"nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin", "flash",
+};
+
+int
 netxen_load_firmware(struct netxen_adapter *adapter)
 {
 	u64 *ptr64;
 	u32 i, flashaddr, size;
 	const struct firmware *fw = adapter->fw;
+	struct pci_dev *pdev = adapter->pdev;
+
+	dev_info(&pdev->dev, "loading firmware from %s\n",
+			fw_name[adapter->fw_type]);
 
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
 		NXWR32(adapter, NETXEN_ROMUSB_GLB_CAS_RST, 1);
@@ -756,7 +830,7 @@ static int
 netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname)
 {
 	__le32 val;
-	u32 major, minor, build, ver, min_ver, bios;
+	u32 ver, min_ver, bios;
 	struct pci_dev *pdev = adapter->pdev;
 	const struct firmware *fw = adapter->fw;
 
@@ -768,21 +842,18 @@ netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname)
 		return -EINVAL;
 
 	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
-	major = (__force u32)val & 0xff;
-	minor = ((__force u32)val >> 8) & 0xff;
-	build = (__force u32)val >> 16;
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		min_ver = NETXEN_VERSION_CODE(4, 0, 216);
 	else
 		min_ver = NETXEN_VERSION_CODE(3, 4, 216);
 
-	ver = NETXEN_VERSION_CODE(major, minor, build);
+	ver = NETXEN_DECODE_VERSION(val);
 
-	if ((major > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
+	if ((_major(ver) > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
 		dev_err(&pdev->dev,
 				"%s: firmware version %d.%d.%d unsupported\n",
-				fwname, major, minor, build);
+				fwname, _major(ver), _minor(ver), _build(ver));
 		return -EINVAL;
 	}
 
@@ -798,22 +869,21 @@ netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname)
 	if (netxen_rom_fast_read(adapter,
 			NX_FW_VERSION_OFFSET, (int *)&val))
 		return -EIO;
-	major = (__force u32)val & 0xff;
-	minor = ((__force u32)val >> 8) & 0xff;
-	build = (__force u32)val >> 16;
-	if (NETXEN_VERSION_CODE(major, minor, build) > ver)
+	val = NETXEN_DECODE_VERSION(val);
+	if (val > ver) {
+		dev_info(&pdev->dev, "%s: firmware is older than flash\n",
+				fwname);
 		return -EINVAL;
+	}
 
 	NXWR32(adapter, NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
 	return 0;
 }
 
-static char *fw_name[] = { "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin" };
-
 void netxen_request_firmware(struct netxen_adapter *adapter)
 {
 	u32 capability, flashed_ver;
-	int fw_type;
+	u8 fw_type;
 	struct pci_dev *pdev = adapter->pdev;
 	int rc = 0;
 
@@ -830,6 +900,8 @@ request_mn:
 
 	netxen_rom_fast_read(adapter,
 			NX_FW_VERSION_OFFSET, (int *)&flashed_ver);
+	flashed_ver = NETXEN_DECODE_VERSION(flashed_ver);
+
 	if (flashed_ver >= NETXEN_VERSION_CODE(4, 0, 220)) {
 		capability = NXRD32(adapter, NX_PEG_TUNE_CAPABILITY);
 		if (capability & NX_PEG_TUNE_MN_PRESENT) {
@@ -838,6 +910,10 @@ request_mn:
 		}
 	}
 
+	fw_type = NX_FLASH_ROMIMAGE;
+	adapter->fw = NULL;
+	goto done;
+
 request_fw:
 	rc = request_firmware(&adapter->fw, fw_name[fw_type], &pdev->dev);
 	if (rc != 0) {
@@ -846,6 +922,7 @@ request_fw:
 			goto request_mn;
 		}
 
+		fw_type = NX_FLASH_ROMIMAGE;
 		adapter->fw = NULL;
 		goto done;
 	}
@@ -859,16 +936,13 @@ request_fw:
 			goto request_mn;
 		}
 
+		fw_type = NX_FLASH_ROMIMAGE;
 		adapter->fw = NULL;
 		goto done;
 	}
 
 done:
-	if (adapter->fw)
-		dev_info(&pdev->dev, "loading firmware from file %s\n",
-				fw_name[fw_type]);
-	else
-		dev_info(&pdev->dev, "loading firmware from flash\n");
+	adapter->fw_type = fw_type;
 }
 
 
@@ -1327,10 +1401,10 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter)
 		smp_mb();
 
 		if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev)) {
-			netif_tx_lock(netdev);
+			__netif_tx_lock(tx_ring->txq, smp_processor_id());
 			if (netxen_tx_avail(tx_ring) > TX_STOP_THRESH)
 				netif_wake_queue(netdev);
-			netif_tx_unlock(netdev);
+			__netif_tx_unlock(tx_ring->txq);
 		}
 	}
 	/*
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 2919a2d12bf..28f270f5ac7 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -94,10 +94,6 @@ static struct pci_device_id netxen_pci_tbl[] __devinitdata = {
 
 MODULE_DEVICE_TABLE(pci, netxen_pci_tbl);
 
-static struct workqueue_struct *netxen_workq;
-#define SCHEDULE_WORK(tp)	queue_work(netxen_workq, tp)
-#define FLUSH_SCHEDULED_WORK()	flush_workqueue(netxen_workq)
-
 static void netxen_watchdog(unsigned long);
 
 static uint32_t crb_cmd_producer[4] = {
@@ -171,6 +167,8 @@ netxen_free_sds_rings(struct netxen_recv_context *recv_ctx)
 {
 	if (recv_ctx->sds_rings != NULL)
 		kfree(recv_ctx->sds_rings);
+
+	recv_ctx->sds_rings = NULL;
 }
 
 static int
@@ -193,6 +191,21 @@ netxen_napi_add(struct netxen_adapter *adapter, struct net_device *netdev)
 }
 
 static void
+netxen_napi_del(struct netxen_adapter *adapter)
+{
+	int ring;
+	struct nx_host_sds_ring *sds_ring;
+	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &recv_ctx->sds_rings[ring];
+		netif_napi_del(&sds_ring->napi);
+	}
+
+	netxen_free_sds_rings(&adapter->recv_ctx);
+}
+
+static void
 netxen_napi_enable(struct netxen_adapter *adapter)
 {
 	int ring;
@@ -215,13 +228,13 @@ netxen_napi_disable(struct netxen_adapter *adapter)
 
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
 		sds_ring = &recv_ctx->sds_rings[ring];
-		napi_disable(&sds_ring->napi);
 		netxen_nic_disable_int(sds_ring);
-		synchronize_irq(sds_ring->irq);
+		napi_synchronize(&sds_ring->napi);
+		napi_disable(&sds_ring->napi);
 	}
 }
 
-static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
+static int nx_set_dma_mask(struct netxen_adapter *adapter)
 {
 	struct pci_dev *pdev = adapter->pdev;
 	uint64_t mask, cmask;
@@ -229,19 +242,17 @@ static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
 	adapter->pci_using_dac = 0;
 
 	mask = DMA_BIT_MASK(32);
-	/*
-	 * Consistent DMA mask is set to 32 bit because it cannot be set to
-	 * 35 bits. For P3 also leave it at 32 bits for now. Only the rings
-	 * come off this pool.
-	 */
 	cmask = DMA_BIT_MASK(32);
 
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
 #ifndef CONFIG_IA64
-	if (revision_id >= NX_P3_B0)
-		mask = DMA_BIT_MASK(39);
-	else if (revision_id == NX_P2_C1)
 		mask = DMA_BIT_MASK(35);
 #endif
+	} else {
+		mask = DMA_BIT_MASK(39);
+		cmask = mask;
+	}
+
 	if (pci_set_dma_mask(pdev, mask) == 0 &&
 		pci_set_consistent_dma_mask(pdev, cmask) == 0) {
 		adapter->pci_using_dac = 1;
@@ -256,13 +267,13 @@ static int
 nx_update_dma_mask(struct netxen_adapter *adapter)
 {
 	int change, shift, err;
-	uint64_t mask, old_mask;
+	uint64_t mask, old_mask, old_cmask;
 	struct pci_dev *pdev = adapter->pdev;
 
 	change = 0;
 
 	shift = NXRD32(adapter, CRB_DMA_SHIFT);
-	if (shift >= 32)
+	if (shift > 32)
 		return 0;
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id) && (shift > 9))
@@ -272,14 +283,29 @@ nx_update_dma_mask(struct netxen_adapter *adapter)
 
 	if (change) {
 		old_mask = pdev->dma_mask;
-		mask = (1ULL<<(32+shift)) - 1;
+		old_cmask = pdev->dev.coherent_dma_mask;
+
+		mask = DMA_BIT_MASK(32+shift);
 
 		err = pci_set_dma_mask(pdev, mask);
 		if (err)
-			return pci_set_dma_mask(pdev, old_mask);
+			goto err_out;
+
+		if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+
+			err = pci_set_consistent_dma_mask(pdev, mask);
+			if (err)
+				goto err_out;
+		}
+		dev_info(&pdev->dev, "using %d-bit dma mask\n", 32+shift);
 	}
 
 	return 0;
+
+err_out:
+	pci_set_dma_mask(pdev, old_mask);
+	pci_set_consistent_dma_mask(pdev, old_cmask);
+	return err;
 }
 
 static void netxen_check_options(struct netxen_adapter *adapter)
@@ -718,6 +744,10 @@ netxen_start_firmware(struct netxen_adapter *adapter, int request_fw)
 	if (request_fw)
 		netxen_request_firmware(adapter);
 
+	err = netxen_need_fw_reset(adapter);
+	if (err <= 0)
+		return err;
+
 	if (first_boot != 0x55555555) {
 		NXWR32(adapter, CRB_CMDPEG_STATE, 0);
 		netxen_pinit_from_rom(adapter, 0);
@@ -829,11 +859,11 @@ netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev)
 
 	adapter->ahw.linkup = 0;
 
-	netxen_napi_enable(adapter);
-
 	if (adapter->max_sds_rings > 1)
 		netxen_config_rss(adapter, 1);
 
+	netxen_napi_enable(adapter);
+
 	if (adapter->capabilities & NX_FW_CAPABILITY_LINK_NOTIFICATION)
 		netxen_linkevent_request(adapter, 1);
 	else
@@ -847,8 +877,9 @@ netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev)
 static void
 netxen_nic_down(struct netxen_adapter *adapter, struct net_device *netdev)
 {
+	spin_lock(&adapter->tx_clean_lock);
 	netif_carrier_off(netdev);
-	netif_stop_queue(netdev);
+	netif_tx_disable(netdev);
 
 	if (adapter->stop_port)
 		adapter->stop_port(adapter);
@@ -859,8 +890,8 @@ netxen_nic_down(struct netxen_adapter *adapter, struct net_device *netdev)
 	netxen_napi_disable(adapter);
 
 	netxen_release_tx_buffers(adapter);
+	spin_unlock(&adapter->tx_clean_lock);
 
-	FLUSH_SCHEDULED_WORK();
 	del_timer_sync(&adapter->watchdog_timer);
 }
 
@@ -875,10 +906,12 @@ netxen_nic_attach(struct netxen_adapter *adapter)
 	struct nx_host_tx_ring *tx_ring;
 
 	err = netxen_init_firmware(adapter);
-	if (err != 0) {
-		printk(KERN_ERR "Failed to init firmware\n");
-		return -EIO;
-	}
+	if (err)
+		return err;
+
+	err = netxen_napi_add(adapter, netdev);
+	if (err)
+		return err;
 
 	if (adapter->fw_major < 4)
 		adapter->max_rds_rings = 3;
@@ -939,9 +972,10 @@ err_out_free_sw:
 static void
 netxen_nic_detach(struct netxen_adapter *adapter)
 {
-	netxen_release_rx_buffers(adapter);
 	netxen_free_hw_resources(adapter);
+	netxen_release_rx_buffers(adapter);
 	netxen_nic_free_irq(adapter);
+	netxen_napi_del(adapter);
 	netxen_free_sw_resources(adapter);
 
 	adapter->is_up = 0;
@@ -1000,7 +1034,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	revision_id = pdev->revision;
 	adapter->ahw.revision_id = revision_id;
 
-	err = nx_set_dma_mask(adapter, revision_id);
+	err = nx_set_dma_mask(adapter);
 	if (err)
 		goto err_out_free_netdev;
 
@@ -1086,9 +1120,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	netdev->irq = adapter->msix_entries[0].vector;
 
-	if (netxen_napi_add(adapter, netdev))
-		goto err_out_disable_msi;
-
 	init_timer(&adapter->watchdog_timer);
 	adapter->watchdog_timer.function = &netxen_watchdog;
 	adapter->watchdog_timer.data = (unsigned long)adapter;
@@ -1158,6 +1189,9 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 
 	unregister_netdev(netdev);
 
+	cancel_work_sync(&adapter->watchdog_task);
+	cancel_work_sync(&adapter->tx_timeout_task);
+
 	if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
 		netxen_nic_detach(adapter);
 	}
@@ -1166,7 +1200,6 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 		netxen_free_adapter_offload(adapter);
 
 	netxen_teardown_intr(adapter);
-	netxen_free_sds_rings(&adapter->recv_ctx);
 
 	netxen_cleanup_pci_map(adapter);
 
@@ -1192,6 +1225,9 @@ netxen_nic_suspend(struct pci_dev *pdev, pm_message_t state)
 	if (netif_running(netdev))
 		netxen_nic_down(adapter, netdev);
 
+	cancel_work_sync(&adapter->watchdog_task);
+	cancel_work_sync(&adapter->tx_timeout_task);
+
 	if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC)
 		netxen_nic_detach(adapter);
 
@@ -1529,10 +1565,7 @@ static int netxen_nic_check_temp(struct netxen_adapter *adapter)
 		printk(KERN_ALERT
 		       "%s: Device temperature %d degrees C exceeds"
 		       " maximum allowed. Hardware has been shut down.\n",
-		       netxen_nic_driver_name, temp_val);
-
-		netif_carrier_off(netdev);
-		netif_stop_queue(netdev);
+		       netdev->name, temp_val);
 		rv = 1;
 	} else if (temp_state == NX_TEMP_WARN) {
 		if (adapter->temp == NX_TEMP_NORMAL) {
@@ -1540,13 +1573,13 @@ static int netxen_nic_check_temp(struct netxen_adapter *adapter)
 			       "%s: Device temperature %d degrees C "
 			       "exceeds operating range."
 			       " Immediate action needed.\n",
-			       netxen_nic_driver_name, temp_val);
+			       netdev->name, temp_val);
 		}
 	} else {
 		if (adapter->temp == NX_TEMP_WARN) {
 			printk(KERN_INFO
 			       "%s: Device temperature is now %d degrees C"
-			       " in normal range.\n", netxen_nic_driver_name,
+			       " in normal range.\n", netdev->name,
 			       temp_val);
 		}
 	}
@@ -1566,10 +1599,7 @@ void netxen_advert_link_change(struct netxen_adapter *adapter, int linkup)
 			netif_carrier_off(netdev);
 			netif_stop_queue(netdev);
 		}
-
-		if (!adapter->has_link_events)
-			netxen_nic_set_link_parameters(adapter);
-
+		adapter->link_changed = !adapter->has_link_events;
 	} else if (!adapter->ahw.linkup && linkup) {
 		printk(KERN_INFO "%s: %s NIC Link is up\n",
 		       netxen_nic_driver_name, netdev->name);
@@ -1578,9 +1608,7 @@ void netxen_advert_link_change(struct netxen_adapter *adapter, int linkup)
 			netif_carrier_on(netdev);
 			netif_wake_queue(netdev);
 		}
-
-		if (!adapter->has_link_events)
-			netxen_nic_set_link_parameters(adapter);
+		adapter->link_changed = !adapter->has_link_events;
 	}
 }
 
@@ -1607,11 +1635,36 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
 	netxen_advert_link_change(adapter, linkup);
 }
 
+static void netxen_nic_thermal_shutdown(struct netxen_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	netif_device_detach(netdev);
+	netxen_nic_down(adapter, netdev);
+	netxen_nic_detach(adapter);
+}
+
 static void netxen_watchdog(unsigned long v)
 {
 	struct netxen_adapter *adapter = (struct netxen_adapter *)v;
 
-	SCHEDULE_WORK(&adapter->watchdog_task);
+	if (netxen_nic_check_temp(adapter))
+		goto do_sched;
+
+	if (!adapter->has_link_events) {
+		netxen_nic_handle_phy_intr(adapter);
+
+		if (adapter->link_changed)
+			goto do_sched;
+	}
+
+	if (netif_running(adapter->netdev))
+		mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
+
+	return;
+
+do_sched:
+	schedule_work(&adapter->watchdog_task);
 }
 
 void netxen_watchdog_task(struct work_struct *work)
@@ -1619,11 +1672,13 @@ void netxen_watchdog_task(struct work_struct *work)
 	struct netxen_adapter *adapter =
 		container_of(work, struct netxen_adapter, watchdog_task);
 
-	if ((adapter->portnum  == 0) && netxen_nic_check_temp(adapter))
+	if (adapter->temp == NX_TEMP_PANIC) {
+		netxen_nic_thermal_shutdown(adapter);
 		return;
+	}
 
-	if (!adapter->has_link_events)
-		netxen_nic_handle_phy_intr(adapter);
+	if (adapter->link_changed)
+		netxen_nic_set_link_parameters(adapter);
 
 	if (netif_running(adapter->netdev))
 		mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
@@ -1631,9 +1686,8 @@ void netxen_watchdog_task(struct work_struct *work)
 
 static void netxen_tx_timeout(struct net_device *netdev)
 {
-	struct netxen_adapter *adapter = (struct netxen_adapter *)
-						netdev_priv(netdev);
-	SCHEDULE_WORK(&adapter->tx_timeout_task);
+	struct netxen_adapter *adapter = netdev_priv(netdev);
+	schedule_work(&adapter->tx_timeout_task);
 }
 
 static void netxen_tx_timeout_task(struct work_struct *work)
@@ -1641,6 +1695,9 @@ static void netxen_tx_timeout_task(struct work_struct *work)
 	struct netxen_adapter *adapter =
 		container_of(work, struct netxen_adapter, tx_timeout_task);
 
+	if (!netif_running(adapter->netdev))
+		return;
+
 	printk(KERN_ERR "%s %s: transmit timeout, resetting.\n",
 	       netxen_nic_driver_name, adapter->netdev->name);
 
@@ -1753,7 +1810,8 @@ static int netxen_nic_poll(struct napi_struct *napi, int budget)
 
 	if ((work_done < budget) && tx_complete) {
 		napi_complete(&sds_ring->napi);
-		netxen_nic_enable_int(sds_ring);
+		if (netif_running(adapter->netdev))
+			netxen_nic_enable_int(sds_ring);
 	}
 
 	return work_done;
@@ -1786,9 +1844,6 @@ static int __init netxen_init_module(void)
 {
 	printk(KERN_INFO "%s\n", netxen_nic_driver_string);
 
-	if ((netxen_workq = create_singlethread_workqueue("netxen")) == NULL)
-		return -ENOMEM;
-
 	return pci_register_driver(&netxen_driver);
 }
 
@@ -1797,7 +1852,6 @@ module_init(netxen_init_module);
 static void __exit netxen_exit_module(void)
 {
 	pci_unregister_driver(&netxen_driver);
-	destroy_workqueue(netxen_workq);
 }
 
 module_exit(netxen_exit_module);
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 8c1f6988f39..89f7b2ad523 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -105,7 +105,7 @@ IVc. Errata
 
 static char version[] __devinitdata =
 KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
-KERN_INFO "  Support available from http://foo.com/bar/baz.html\n";
+"  Support available from http://foo.com/bar/baz.html\n";
 
 /* define to 1 to enable PIO instead of MMIO */
 #undef USE_IO_OPS
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index ec7cf5ac4f0..690b9c76d34 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -156,6 +156,7 @@ static struct net_device_stats *el3_get_stats(struct net_device *dev);
 static int el3_rx(struct net_device *dev);
 static int el3_close(struct net_device *dev);
 static void el3_tx_timeout(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
 static void set_multicast_list(struct net_device *dev);
 static const struct ethtool_ops netdev_ethtool_ops;
 
@@ -488,8 +489,7 @@ static void tc589_reset(struct net_device *dev)
     /* Switch to register set 1 for normal use. */
     EL3WINDOW(1);
 
-    /* Accept b-cast and phys addr only. */
-    outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
+    set_rx_mode(dev);
     outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
     outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
     outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
@@ -700,7 +700,7 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id)
 		if (fifo_diag & 0x2000) {
 		    /* Rx underrun */
 		    tc589_wait_for_completion(dev, RxReset);
-		    set_multicast_list(dev);
+		    set_rx_mode(dev);
 		    outw(RxEnable, ioaddr + EL3_CMD);
 		}
 		outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
@@ -905,14 +905,11 @@ static int el3_rx(struct net_device *dev)
     return 0;
 }
 
-static void set_multicast_list(struct net_device *dev)
+static void set_rx_mode(struct net_device *dev)
 {
-    struct el3_private *lp = netdev_priv(dev);
-    struct pcmcia_device *link = lp->p_dev;
     unsigned int ioaddr = dev->base_addr;
     u16 opts = SetRxFilter | RxStation | RxBroadcast;
 
-    if (!pcmcia_dev_present(link)) return;
     if (dev->flags & IFF_PROMISC)
 	opts |= RxMulticast | RxProm;
     else if (dev->mc_count || (dev->flags & IFF_ALLMULTI))
@@ -920,6 +917,16 @@ static void set_multicast_list(struct net_device *dev)
     outw(opts, ioaddr + EL3_CMD);
 }
 
+static void set_multicast_list(struct net_device *dev)
+{
+	struct el3_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	set_rx_mode(dev);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
 static int el3_close(struct net_device *dev)
 {
     struct el3_private *lp = netdev_priv(dev);
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index f51944b28cf..06618af1a46 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -298,14 +298,11 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
 
     strcpy(info->node.dev_name, dev->name);
 
-    printk(KERN_INFO "%s: port %#3lx, irq %d,",
-           dev->name, dev->base_addr, dev->irq);
-    printk (" mmio %#5lx,", (u_long)ti->mmio);
-    printk (" sram %#5lx,", (u_long)ti->sram_base << 12);
-    printk ("\n" KERN_INFO "  hwaddr=");
-    for (i = 0; i < TR_ALEN; i++)
-        printk("%02X", dev->dev_addr[i]);
-    printk("\n");
+    printk(KERN_INFO
+	   "%s: port %#3lx, irq %d,  mmio %#5lx, sram %#5lx, hwaddr=%pM\n",
+           dev->name, dev->base_addr, dev->irq,
+	   (u_long)ti->mmio, (u_long)(ti->sram_base << 12),
+	   dev->dev_addr);
     return 0;
 
 cs_failed:
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 02ef63ed1f9..36de91baf23 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -1425,15 +1425,12 @@ static void BuildLAF(int *ladrf, int *adr)
   ladrf[byte] |= (1 << (hashcode & 7));
 
 #ifdef PCMCIA_DEBUG
-  if (pc_debug > 2) {
-    printk(KERN_DEBUG "    adr =");
-    for (i = 0; i < 6; i++)
-      printk(" %02X", adr[i]);
-    printk("\n" KERN_DEBUG "    hashcode = %d(decimal), ladrf[0:63]"
-	   " =", hashcode);
-    for (i = 0; i < 8; i++)
-      printk(" %02X", ladrf[i]);
-    printk("\n");
+  if (pc_debug > 2)
+    printk(KERN_DEBUG "    adr =%pM\n", adr);
+  printk(KERN_DEBUG "    hashcode = %d(decimal), ladrf[0:63] =", hashcode);
+  for (i = 0; i < 8; i++)
+    printk(KERN_CONT " %02X", ladrf[i]);
+  printk(KERN_CONT "\n");
   }
 #endif
 } /* BuildLAF */
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 652a3688836..9ef1c1bfa83 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1727,6 +1727,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50),
 	PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110),
 	PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941),
+	PCMCIA_DEVICE_PROD_ID12("RIOS Systems Co.", "PC CARD3 ETHERNET", 0x7dd33481, 0x10b41826),
 	PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df),
 	PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0),
 	PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd),
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 1c35e1d637a..23e1a0750fe 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -485,7 +485,7 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev,
 					   &new_ring_dma_addr);
 	if (new_tx_ring == NULL) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR
+			printk(KERN_ERR
 			       "%s: Consistent memory allocation failed.\n",
 			       dev->name);
 		return;
@@ -496,7 +496,7 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev,
 				GFP_ATOMIC);
 	if (!new_dma_addr_list) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR
+			printk(KERN_ERR
 			       "%s: Memory allocation failed.\n", dev->name);
 		goto free_new_tx_ring;
 	}
@@ -505,7 +505,7 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev,
 				GFP_ATOMIC);
 	if (!new_skb_list) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR
+			printk(KERN_ERR
 			       "%s: Memory allocation failed.\n", dev->name);
 		goto free_new_lists;
 	}
@@ -563,7 +563,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 					   &new_ring_dma_addr);
 	if (new_rx_ring == NULL) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR
+			printk(KERN_ERR
 			       "%s: Consistent memory allocation failed.\n",
 			       dev->name);
 		return;
@@ -574,7 +574,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 				GFP_ATOMIC);
 	if (!new_dma_addr_list) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR
+			printk(KERN_ERR
 			       "%s: Memory allocation failed.\n", dev->name);
 		goto free_new_rx_ring;
 	}
@@ -583,7 +583,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 				GFP_ATOMIC);
 	if (!new_skb_list) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR
+			printk(KERN_ERR
 			       "%s: Memory allocation failed.\n", dev->name);
 		goto free_new_lists;
 	}
@@ -1611,8 +1611,11 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		if (pcnet32_dwio_read_csr(ioaddr, 0) == 4
 		    && pcnet32_dwio_check(ioaddr)) {
 			a = &pcnet32_dwio;
-		} else
+		} else {
+			if (pcnet32_debug & NETIF_MSG_PROBE)
+				printk(KERN_ERR PFX "No access methods\n");
 			goto err_release_region;
+		}
 	}
 
 	chip_version =
@@ -1719,7 +1722,9 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		ret = -ENOMEM;
 		goto err_release_region;
 	}
-	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	if (pdev)
+		SET_NETDEV_DEV(dev, &pdev->dev);
 
 	if (pcnet32_debug & NETIF_MSG_PROBE)
 		printk(KERN_INFO PFX "%s at %#3lx,", chipname, ioaddr);
@@ -1766,38 +1771,38 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		/* Version 0x2623 and 0x2624 */
 		if (((chip_version + 1) & 0xfffe) == 0x2624) {
 			i = a->read_csr(ioaddr, 80) & 0x0C00;	/* Check tx_start_pt */
-			printk("\n" KERN_INFO "    tx_start_pt(0x%04x):", i);
+			printk(KERN_INFO "    tx_start_pt(0x%04x):", i);
 			switch (i >> 10) {
 			case 0:
-				printk("  20 bytes,");
+				printk(KERN_CONT "  20 bytes,");
 				break;
 			case 1:
-				printk("  64 bytes,");
+				printk(KERN_CONT "  64 bytes,");
 				break;
 			case 2:
-				printk(" 128 bytes,");
+				printk(KERN_CONT " 128 bytes,");
 				break;
 			case 3:
-				printk("~220 bytes,");
+				printk(KERN_CONT "~220 bytes,");
 				break;
 			}
 			i = a->read_bcr(ioaddr, 18);	/* Check Burst/Bus control */
-			printk(" BCR18(%x):", i & 0xffff);
+			printk(KERN_CONT " BCR18(%x):", i & 0xffff);
 			if (i & (1 << 5))
-				printk("BurstWrEn ");
+				printk(KERN_CONT "BurstWrEn ");
 			if (i & (1 << 6))
-				printk("BurstRdEn ");
+				printk(KERN_CONT "BurstRdEn ");
 			if (i & (1 << 7))
-				printk("DWordIO ");
+				printk(KERN_CONT "DWordIO ");
 			if (i & (1 << 11))
-				printk("NoUFlow ");
+				printk(KERN_CONT "NoUFlow ");
 			i = a->read_bcr(ioaddr, 25);
-			printk("\n" KERN_INFO "    SRAMSIZE=0x%04x,", i << 8);
+			printk(KERN_INFO "    SRAMSIZE=0x%04x,", i << 8);
 			i = a->read_bcr(ioaddr, 26);
-			printk(" SRAM_BND=0x%04x,", i << 8);
+			printk(KERN_CONT " SRAM_BND=0x%04x,", i << 8);
 			i = a->read_bcr(ioaddr, 27);
 			if (i & (1 << 14))
-				printk("LowLatRx");
+				printk(KERN_CONT "LowLatRx");
 		}
 	}
 
@@ -1818,7 +1823,6 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 
 	spin_lock_init(&lp->lock);
 
-	SET_NETDEV_DEV(dev, &pdev->dev);
 	lp->name = chipname;
 	lp->shared_irq = shared;
 	lp->tx_ring_size = TX_RING_SIZE;	/* default tx ring size */
@@ -1835,7 +1839,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 	lp->chip_version = chip_version;
 	lp->msg_enable = pcnet32_debug;
 	if ((cards_found >= MAX_UNITS)
-	    || (options[cards_found] > sizeof(options_mapping)))
+	    || (options[cards_found] >= sizeof(options_mapping)))
 		lp->options = PCNET32_PORT_ASEL;
 	else
 		lp->options = options_mapping[options[cards_found]];
@@ -1852,12 +1856,6 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 	    ((cards_found >= MAX_UNITS) || full_duplex[cards_found]))
 		lp->options |= PCNET32_PORT_FD;
 
-	if (!a) {
-		if (pcnet32_debug & NETIF_MSG_PROBE)
-			printk(KERN_ERR PFX "No access methods\n");
-		ret = -ENODEV;
-		goto err_free_consistent;
-	}
 	lp->a = *a;
 
 	/* prior to register_netdev, dev->name is not yet correct */
@@ -1973,14 +1971,13 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 
 	return 0;
 
-      err_free_ring:
+err_free_ring:
 	pcnet32_free_ring(dev);
-      err_free_consistent:
 	pci_free_consistent(lp->pci_dev, sizeof(*lp->init_block),
 			    lp->init_block, lp->init_dma_addr);
-      err_free_netdev:
+err_free_netdev:
 	free_netdev(dev);
-      err_release_region:
+err_release_region:
 	release_region(ioaddr, PCNET32_TOTAL_SIZE);
 	return ret;
 }
@@ -1996,7 +1993,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name)
 					   &lp->tx_ring_dma_addr);
 	if (lp->tx_ring == NULL) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR PFX
+			printk(KERN_ERR PFX
 			       "%s: Consistent memory allocation failed.\n",
 			       name);
 		return -ENOMEM;
@@ -2008,7 +2005,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name)
 					   &lp->rx_ring_dma_addr);
 	if (lp->rx_ring == NULL) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR PFX
+			printk(KERN_ERR PFX
 			       "%s: Consistent memory allocation failed.\n",
 			       name);
 		return -ENOMEM;
@@ -2018,7 +2015,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name)
 				  GFP_ATOMIC);
 	if (!lp->tx_dma_addr) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR PFX
+			printk(KERN_ERR PFX
 			       "%s: Memory allocation failed.\n", name);
 		return -ENOMEM;
 	}
@@ -2027,7 +2024,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name)
 				  GFP_ATOMIC);
 	if (!lp->rx_dma_addr) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR PFX
+			printk(KERN_ERR PFX
 			       "%s: Memory allocation failed.\n", name);
 		return -ENOMEM;
 	}
@@ -2036,7 +2033,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name)
 				GFP_ATOMIC);
 	if (!lp->tx_skbuff) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR PFX
+			printk(KERN_ERR PFX
 			       "%s: Memory allocation failed.\n", name);
 		return -ENOMEM;
 	}
@@ -2045,7 +2042,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name)
 				GFP_ATOMIC);
 	if (!lp->rx_skbuff) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR PFX
+			printk(KERN_ERR PFX
 			       "%s: Memory allocation failed.\n", name);
 		return -ENOMEM;
 	}
@@ -2089,6 +2086,7 @@ static void pcnet32_free_ring(struct net_device *dev)
 static int pcnet32_open(struct net_device *dev)
 {
 	struct pcnet32_private *lp = netdev_priv(dev);
+	struct pci_dev *pdev = lp->pci_dev;
 	unsigned long ioaddr = dev->base_addr;
 	u16 val;
 	int i;
@@ -2149,9 +2147,9 @@ static int pcnet32_open(struct net_device *dev)
 	lp->a.write_csr(ioaddr, 124, val);
 
 	/* Allied Telesyn AT 2700/2701 FX are 100Mbit only and do not negotiate */
-	if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT &&
-	    (lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
-	     lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
+	if (pdev && pdev->subsystem_vendor == PCI_VENDOR_ID_AT &&
+	    (pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
+	     pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
 		if (lp->options & PCNET32_PORT_ASEL) {
 			lp->options = PCNET32_PORT_FD | PCNET32_PORT_100;
 			if (netif_msg_link(lp))
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 33984b73723..22cdd451fb8 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -30,6 +30,7 @@
 
 #ifdef CONFIG_OF_GPIO
 #include <linux/of_gpio.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 #endif
 
@@ -81,13 +82,12 @@ static struct mdiobb_ops mdio_gpio_ops = {
 	.get_mdio_data = mdio_get,
 };
 
-static int __devinit mdio_gpio_bus_init(struct device *dev,
+static struct mii_bus * __devinit mdio_gpio_bus_init(struct device *dev,
 					struct mdio_gpio_platform_data *pdata,
 					int bus_id)
 {
 	struct mii_bus *new_bus;
 	struct mdio_gpio_info *bitbang;
-	int ret = -ENOMEM;
 	int i;
 
 	bitbang = kzalloc(sizeof(*bitbang), GFP_KERNEL);
@@ -104,8 +104,6 @@ static int __devinit mdio_gpio_bus_init(struct device *dev,
 
 	new_bus->name = "GPIO Bitbanged MDIO",
 
-	ret = -ENODEV;
-
 	new_bus->phy_mask = pdata->phy_mask;
 	new_bus->irq = pdata->irqs;
 	new_bus->parent = dev;
@@ -129,15 +127,8 @@ static int __devinit mdio_gpio_bus_init(struct device *dev,
 
 	dev_set_drvdata(dev, new_bus);
 
-	ret = mdiobus_register(new_bus);
-	if (ret)
-		goto out_free_all;
-
-	return 0;
+	return new_bus;
 
-out_free_all:
-	dev_set_drvdata(dev, NULL);
-	gpio_free(bitbang->mdio);
 out_free_mdc:
 	gpio_free(bitbang->mdc);
 out_free_bus:
@@ -145,30 +136,47 @@ out_free_bus:
 out_free_bitbang:
 	kfree(bitbang);
 out:
-	return ret;
+	return NULL;
 }
 
-static void __devexit mdio_gpio_bus_destroy(struct device *dev)
+static void __devinit mdio_gpio_bus_deinit(struct device *dev)
 {
 	struct mii_bus *bus = dev_get_drvdata(dev);
 	struct mdio_gpio_info *bitbang = bus->priv;
 
-	mdiobus_unregister(bus);
-	free_mdio_bitbang(bus);
 	dev_set_drvdata(dev, NULL);
-	gpio_free(bitbang->mdc);
 	gpio_free(bitbang->mdio);
+	gpio_free(bitbang->mdc);
+	free_mdio_bitbang(bus);
 	kfree(bitbang);
 }
 
+static void __devexit mdio_gpio_bus_destroy(struct device *dev)
+{
+	struct mii_bus *bus = dev_get_drvdata(dev);
+
+	mdiobus_unregister(bus);
+	mdio_gpio_bus_deinit(dev);
+}
+
 static int __devinit mdio_gpio_probe(struct platform_device *pdev)
 {
 	struct mdio_gpio_platform_data *pdata = pdev->dev.platform_data;
+	struct mii_bus *new_bus;
+	int ret;
 
 	if (!pdata)
 		return -ENODEV;
 
-	return mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
+	new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
+	if (!new_bus)
+		return -ENODEV;
+
+	ret = mdiobus_register(new_bus);
+	if (ret)
+		mdio_gpio_bus_deinit(&pdev->dev);
+
+	return ret;
 }
 
 static int __devexit mdio_gpio_remove(struct platform_device *pdev)
@@ -179,29 +187,12 @@ static int __devexit mdio_gpio_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_OF_GPIO
-static void __devinit add_phy(struct mdio_gpio_platform_data *pdata,
-			      struct device_node *np)
-{
-	const u32 *data;
-	int len, id, irq;
-
-	data = of_get_property(np, "reg", &len);
-	if (!data || len != 4)
-		return;
-
-	id = *data;
-	pdata->phy_mask &= ~(1 << id);
-
-	irq = of_irq_to_resource(np, 0, NULL);
-	if (irq)
-		pdata->irqs[id] = irq;
-}
 
 static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
                                         const struct of_device_id *match)
 {
-	struct device_node *np = NULL;
 	struct mdio_gpio_platform_data *pdata;
+	struct mii_bus *new_bus;
 	int ret;
 
 	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
@@ -215,14 +206,18 @@ static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
 
 	ret = of_get_gpio(ofdev->node, 1);
 	if (ret < 0)
-                goto out_free;
+		goto out_free;
 	pdata->mdio = ret;
 
-	while ((np = of_get_next_child(ofdev->node, np)))
-		if (!strcmp(np->type, "ethernet-phy"))
-			add_phy(pdata, np);
+	new_bus = mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc);
+	if (!new_bus)
+		return -ENODEV;
 
-	return mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc);
+	ret = of_mdiobus_register(new_bus, ofdev->node);
+	if (ret)
+		mdio_gpio_bus_deinit(&ofdev->dev);
+
+	return ret;
 
 out_free:
 	kfree(pdata);
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 61755cbd978..eda94fcd406 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -928,13 +928,32 @@ static void phy_state_machine(struct work_struct *work)
 				 * Otherwise, it's 0, and we're
 				 * still waiting for AN */
 				if (err > 0) {
-					phydev->state = PHY_RUNNING;
+					err = phy_read_status(phydev);
+					if (err)
+						break;
+
+					if (phydev->link) {
+						phydev->state = PHY_RUNNING;
+						netif_carrier_on(phydev->attached_dev);
+					} else
+						phydev->state = PHY_NOLINK;
+					phydev->adjust_link(phydev->attached_dev);
 				} else {
 					phydev->state = PHY_AN;
 					phydev->link_timeout = PHY_AN_TIMEOUT;
 				}
-			} else
-				phydev->state = PHY_RUNNING;
+			} else {
+				err = phy_read_status(phydev);
+				if (err)
+					break;
+
+				if (phydev->link) {
+					phydev->state = PHY_RUNNING;
+					netif_carrier_on(phydev->attached_dev);
+				} else
+					phydev->state = PHY_NOLINK;
+				phydev->adjust_link(phydev->attached_dev);
+			}
 			break;
 	}
 
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index eba937c4637..b10fedd8214 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -134,8 +134,10 @@ int phy_scan_fixups(struct phy_device *phydev)
 
 			err = fixup->run(phydev);
 
-			if (err < 0)
+			if (err < 0) {
+				mutex_unlock(&phy_fixup_lock);
 				return err;
+			}
 		}
 	}
 	mutex_unlock(&phy_fixup_lock);
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index 7a62f781fef..2ca8b0d84ee 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -270,6 +270,9 @@ static const struct net_device_ops plip_netdev_ops = {
 	.ndo_stop		 = plip_close,
 	.ndo_start_xmit		 = plip_tx_packet,
 	.ndo_do_ioctl		 = plip_ioctl,
+	.ndo_change_mtu		 = eth_change_mtu,
+	.ndo_set_mac_address	 = eth_mac_addr,
+	.ndo_validate_addr	 = eth_validate_addr,
 };
 
 /* Entry point of PLIP driver.
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index 17c116bb332..6de8399d6dd 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -356,6 +356,7 @@ ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf,
 	if (!skb_queue_empty(&ap->rqueue))
 		tasklet_schedule(&ap->tsk);
 	ap_put(ap);
+	tty_unthrottle(tty);
 }
 
 static void
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 639d11bc444..cd37d739ac7 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1384,7 +1384,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 
 	/* create a	fragment for each channel */
 	bits = B;
-	while (nfree > 0 &&	len	> 0) {
+	while (len	> 0) {
 		list = list->next;
 		if (list ==	&ppp->channels)	{
 			i =	0;
@@ -1431,29 +1431,31 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 		*otherwise divide it according to the speed
 		*of the channel we are going to transmit on
 		*/
-		if (pch->speed == 0) {
-			flen = totlen/nfree	;
-			if (nbigger > 0) {
-				flen++;
-				nbigger--;
-			}
-		} else {
-			flen = (((totfree - nzero)*(totlen + hdrlen*totfree)) /
-				((totspeed*totfree)/pch->speed)) - hdrlen;
-			if (nbigger > 0) {
-				flen += ((totfree - nzero)*pch->speed)/totspeed;
-				nbigger -= ((totfree - nzero)*pch->speed)/
+		if (nfree > 0) {
+			if (pch->speed == 0) {
+				flen = totlen/nfree	;
+				if (nbigger > 0) {
+					flen++;
+					nbigger--;
+				}
+			} else {
+				flen = (((totfree - nzero)*(totlen + hdrlen*totfree)) /
+					((totspeed*totfree)/pch->speed)) - hdrlen;
+				if (nbigger > 0) {
+					flen += ((totfree - nzero)*pch->speed)/totspeed;
+					nbigger -= ((totfree - nzero)*pch->speed)/
 							totspeed;
+				}
 			}
+			nfree--;
 		}
-		nfree--;
 
 		/*
 		 *check	if we are on the last channel or
 		 *we exceded the lenght	of the data	to
 		 *fragment
 		 */
-		if ((nfree == 0) || (flen > len))
+		if ((nfree <= 0) || (flen > len))
 			flen = len;
 		/*
 		 *it is not worth to tx on slow channels:
@@ -1467,7 +1469,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 			continue;
 		}
 
-		mtu	= pch->chan->mtu + 2 - hdrlen;
+		mtu	= pch->chan->mtu - hdrlen;
 		if (mtu	< 4)
 			mtu	= 4;
 		if (flen > mtu)
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index aa3d39f38e2..d2fa2db1358 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -397,6 +397,7 @@ ppp_sync_receive(struct tty_struct *tty, const unsigned char *buf,
 	if (!skb_queue_empty(&ap->rqueue))
 		tasklet_schedule(&ap->tsk);
 	sp_put(ap);
+	tty_unthrottle(tty);
 }
 
 static void
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index f0031f1f97e..5f2090233d7 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -1063,6 +1063,7 @@ static void *pppoe_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 	else {
 		int hash = hash_item(po->pppoe_pa.sid, po->pppoe_pa.remote);
 
+		po = NULL;
 		while (++hash < PPPOE_HASH_SIZE) {
 			po = pn->hash_table[hash];
 			if (po)
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index e7935d09c89..e0f9219a0ae 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -2680,6 +2680,7 @@ out_unregister_pppol2tp_proto:
 static void __exit pppol2tp_exit(void)
 {
 	unregister_pppox_proto(PX_PROTO_OL2TP);
+	unregister_pernet_gen_device(pppol2tp_net_id, &pppol2tp_net_ops);
 	proto_unregister(&pppol2tp_sk_proto);
 }
 
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index d1a5fb4d6ac..a3932c9f340 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -1411,6 +1411,7 @@ static const struct net_device_ops gelic_netdevice_ops = {
 	.ndo_set_multicast_list = gelic_net_set_multi,
 	.ndo_change_mtu = gelic_net_change_mtu,
 	.ndo_tx_timeout = gelic_net_tx_timeout,
+	.ndo_set_mac_address = eth_mac_addr,
 	.ndo_validate_addr = eth_validate_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = gelic_net_poll_controller,
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index b6b3ca9bdb2..6932b08d746 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2707,6 +2707,7 @@ static const struct net_device_ops gelic_wl_netdevice_ops = {
 	.ndo_set_multicast_list = gelic_net_set_multi,
 	.ndo_change_mtu = gelic_net_change_mtu,
 	.ndo_tx_timeout = gelic_net_tx_timeout,
+	.ndo_set_mac_address = eth_mac_addr,
 	.ndo_validate_addr = eth_validate_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = gelic_net_poll_controller,
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 156e02e8905..6ed5317ab1c 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -1607,6 +1607,8 @@ int ql_mb_get_fw_state(struct ql_adapter *qdev);
 int ql_cam_route_initialize(struct ql_adapter *qdev);
 int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
 int ql_mb_about_fw(struct ql_adapter *qdev);
+void ql_link_on(struct ql_adapter *qdev);
+void ql_link_off(struct ql_adapter *qdev);
 
 #if 1
 #define QL_ALL_DUMP
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 37c99fe7977..eb6a9ee640e 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -59,7 +59,7 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev)
 			cqicb->pkt_delay =
 			    cpu_to_le16(qdev->tx_max_coalesced_frames);
 			cqicb->flags = FLAGS_LI;
-			status = ql_write_cfg(qdev, cqicb, sizeof(cqicb),
+			status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb),
 						CFG_LCQ, rx_ring->cq_id);
 			if (status) {
 				QPRINTK(qdev, IFUP, ERR,
@@ -82,7 +82,7 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev)
 			cqicb->pkt_delay =
 			    cpu_to_le16(qdev->rx_max_coalesced_frames);
 			cqicb->flags = FLAGS_LI;
-			status = ql_write_cfg(qdev, cqicb, sizeof(cqicb),
+			status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb),
 						CFG_LCQ, rx_ring->cq_id);
 			if (status) {
 				QPRINTK(qdev, IFUP, ERR,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 90d1f76c0e8..5768af17f16 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -214,6 +214,10 @@ int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit,
 		return -ENOMEM;
 	}
 
+	status = ql_sem_spinlock(qdev, SEM_ICB_MASK);
+	if (status)
+		return status;
+
 	status = ql_wait_cfg(qdev, bit);
 	if (status) {
 		QPRINTK(qdev, IFUP, ERR,
@@ -221,12 +225,8 @@ int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit,
 		goto exit;
 	}
 
-	status = ql_sem_spinlock(qdev, SEM_ICB_MASK);
-	if (status)
-		goto exit;
 	ql_write32(qdev, ICB_L, (u32) map);
 	ql_write32(qdev, ICB_H, (u32) (map >> 32));
-	ql_sem_unlock(qdev, SEM_ICB_MASK);	/* does flush too */
 
 	mask = CFG_Q_MASK | (bit << 16);
 	value = bit | (q_id << CFG_Q_SHIFT);
@@ -237,6 +237,7 @@ int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit,
 	 */
 	status = ql_wait_cfg(qdev, bit);
 exit:
+	ql_sem_unlock(qdev, SEM_ICB_MASK);	/* does flush too */
 	pci_unmap_single(qdev->pdev, map, size, direction);
 	return status;
 }
@@ -412,6 +413,57 @@ exit:
 	return status;
 }
 
+/* Set or clear MAC address in hardware. We sometimes
+ * have to clear it to prevent wrong frame routing
+ * especially in a bonding environment.
+ */
+static int ql_set_mac_addr(struct ql_adapter *qdev, int set)
+{
+	int status;
+	char zero_mac_addr[ETH_ALEN];
+	char *addr;
+
+	if (set) {
+		addr = &qdev->ndev->dev_addr[0];
+		QPRINTK(qdev, IFUP, DEBUG,
+			"Set Mac addr %02x:%02x:%02x:%02x:%02x:%02x\n",
+			addr[0], addr[1], addr[2], addr[3],
+			addr[4], addr[5]);
+	} else {
+		memset(zero_mac_addr, 0, ETH_ALEN);
+		addr = &zero_mac_addr[0];
+		QPRINTK(qdev, IFUP, DEBUG,
+				"Clearing MAC address on %s\n",
+				qdev->ndev->name);
+	}
+	status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		return status;
+	status = ql_set_mac_addr_reg(qdev, (u8 *) addr,
+			MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
+	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		QPRINTK(qdev, IFUP, ERR, "Failed to init mac "
+			"address.\n");
+	return status;
+}
+
+void ql_link_on(struct ql_adapter *qdev)
+{
+	QPRINTK(qdev, LINK, ERR, "%s: Link is up.\n",
+				 qdev->ndev->name);
+	netif_carrier_on(qdev->ndev);
+	ql_set_mac_addr(qdev, 1);
+}
+
+void ql_link_off(struct ql_adapter *qdev)
+{
+	QPRINTK(qdev, LINK, ERR, "%s: Link is down.\n",
+				 qdev->ndev->name);
+	netif_carrier_off(qdev->ndev);
+	ql_set_mac_addr(qdev, 0);
+}
+
 /* Get a specific frame routing value from the CAM.
  * Used for debug and reg dump.
  */
@@ -1628,7 +1680,7 @@ static void ql_process_mac_tx_intr(struct ql_adapter *qdev,
 	tx_ring = &qdev->tx_ring[mac_rsp->txq_idx];
 	tx_ring_desc = &tx_ring->q[mac_rsp->tid];
 	ql_unmap_send(qdev, tx_ring_desc, tx_ring_desc->map_cnt);
-	qdev->stats.tx_bytes += tx_ring_desc->map_cnt;
+	qdev->stats.tx_bytes += (tx_ring_desc->skb)->len;
 	qdev->stats.tx_packets++;
 	dev_kfree_skb(tx_ring_desc->skb);
 	tx_ring_desc->skb = NULL;
@@ -1660,13 +1712,13 @@ static void ql_process_mac_tx_intr(struct ql_adapter *qdev,
 /* Fire up a handler to reset the MPI processor. */
 void ql_queue_fw_error(struct ql_adapter *qdev)
 {
-	netif_carrier_off(qdev->ndev);
+	ql_link_off(qdev);
 	queue_delayed_work(qdev->workqueue, &qdev->mpi_reset_work, 0);
 }
 
 void ql_queue_asic_error(struct ql_adapter *qdev)
 {
-	netif_carrier_off(qdev->ndev);
+	ql_link_off(qdev);
 	ql_disable_interrupts(qdev);
 	/* Clear adapter up bit to signal the recovery
 	 * process that it shouldn't kill the reset worker
@@ -2104,7 +2156,7 @@ static int qlge_send(struct sk_buff *skb, struct net_device *ndev)
 	}
 	tx_ring_desc = &tx_ring->q[tx_ring->prod_idx];
 	mac_iocb_ptr = tx_ring_desc->queue_entry;
-	memset((void *)mac_iocb_ptr, 0, sizeof(mac_iocb_ptr));
+	memset((void *)mac_iocb_ptr, 0, sizeof(*mac_iocb_ptr));
 
 	mac_iocb_ptr->opcode = OPCODE_OB_MAC_IOCB;
 	mac_iocb_ptr->tid = tx_ring_desc->index;
@@ -2743,7 +2795,7 @@ static int ql_start_tx_ring(struct ql_adapter *qdev, struct tx_ring *tx_ring)
 
 	ql_init_tx_ring(qdev, tx_ring);
 
-	err = ql_write_cfg(qdev, wqicb, sizeof(wqicb), CFG_LRQ,
+	err = ql_write_cfg(qdev, wqicb, sizeof(*wqicb), CFG_LRQ,
 			   (u16) tx_ring->wq_id);
 	if (err) {
 		QPRINTK(qdev, IFUP, ERR, "Failed to load tx_ring.\n");
@@ -3008,7 +3060,7 @@ static int ql_start_rss(struct ql_adapter *qdev)
 	int i;
 	u8 *hash_id = (u8 *) ricb->hash_cq_id;
 
-	memset((void *)ricb, 0, sizeof(ricb));
+	memset((void *)ricb, 0, sizeof(*ricb));
 
 	ricb->base_cq = qdev->rss_ring_first_cq_id | RSS_L4K;
 	ricb->flags =
@@ -3030,7 +3082,7 @@ static int ql_start_rss(struct ql_adapter *qdev)
 
 	QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n");
 
-	status = ql_write_cfg(qdev, ricb, sizeof(ricb), CFG_LR, 0);
+	status = ql_write_cfg(qdev, ricb, sizeof(*ricb), CFG_LR, 0);
 	if (status) {
 		QPRINTK(qdev, IFUP, ERR, "Failed to load RICB.\n");
 		return status;
@@ -3039,25 +3091,40 @@ static int ql_start_rss(struct ql_adapter *qdev)
 	return status;
 }
 
-/* Initialize the frame-to-queue routing. */
-static int ql_route_initialize(struct ql_adapter *qdev)
+static int ql_clear_routing_entries(struct ql_adapter *qdev)
 {
-	int status = 0;
-	int i;
+	int i, status = 0;
 
 	status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
 	if (status)
 		return status;
-
 	/* Clear all the entries in the routing table. */
 	for (i = 0; i < 16; i++) {
 		status = ql_set_routing_reg(qdev, i, 0, 0);
 		if (status) {
 			QPRINTK(qdev, IFUP, ERR,
-				"Failed to init routing register for CAM packets.\n");
-			goto exit;
+				"Failed to init routing register for CAM "
+				"packets.\n");
+			break;
 		}
 	}
+	ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
+	return status;
+}
+
+/* Initialize the frame-to-queue routing. */
+static int ql_route_initialize(struct ql_adapter *qdev)
+{
+	int status = 0;
+
+	status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+	if (status)
+		return status;
+
+	/* Clear all the entries in the routing table. */
+	status = ql_clear_routing_entries(qdev);
+	if (status)
+		goto exit;
 
 	status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1);
 	if (status) {
@@ -3096,14 +3163,15 @@ exit:
 
 int ql_cam_route_initialize(struct ql_adapter *qdev)
 {
-	int status;
+	int status, set;
 
-	status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
-	if (status)
-		return status;
-	status = ql_set_mac_addr_reg(qdev, (u8 *) qdev->ndev->perm_addr,
-			     MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
-	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+	/* If check if the link is up and use to
+	 * determine if we are setting or clearing
+	 * the MAC address in the CAM.
+	 */
+	set = ql_read32(qdev, STS);
+	set &= qdev->port_link_up;
+	status = ql_set_mac_addr(qdev, set);
 	if (status) {
 		QPRINTK(qdev, IFUP, ERR, "Failed to init mac address.\n");
 		return status;
@@ -3210,9 +3278,17 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
 {
 	u32 value;
 	int status = 0;
-	unsigned long end_jiffies = jiffies +
-		max((unsigned long)1, usecs_to_jiffies(30));
+	unsigned long end_jiffies;
 
+	/* Clear all the entries in the routing table. */
+	status = ql_clear_routing_entries(qdev);
+	if (status) {
+		QPRINTK(qdev, IFUP, ERR, "Failed to clear routing bits.\n");
+		return status;
+	}
+
+	end_jiffies = jiffies +
+		max((unsigned long)1, usecs_to_jiffies(30));
 	ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
 
 	do {
@@ -3252,7 +3328,7 @@ static int ql_adapter_down(struct ql_adapter *qdev)
 	int i, status = 0;
 	struct rx_ring *rx_ring;
 
-	netif_carrier_off(qdev->ndev);
+	ql_link_off(qdev);
 
 	/* Don't kill the reset worker thread if we
 	 * are in the process of recovery.
@@ -3319,8 +3395,12 @@ static int ql_adapter_up(struct ql_adapter *qdev)
 	}
 	set_bit(QL_ADAPTER_UP, &qdev->flags);
 	ql_alloc_rx_buffers(qdev);
-	if ((ql_read32(qdev, STS) & qdev->port_init))
-		netif_carrier_on(qdev->ndev);
+	/* If the port is initialized and the
+	 * link is up the turn on the carrier.
+	 */
+	if ((ql_read32(qdev, STS) & qdev->port_init) &&
+			(ql_read32(qdev, STS) & qdev->port_link_up))
+		ql_link_on(qdev);
 	ql_enable_interrupts(qdev);
 	ql_enable_all_completion_interrupts(qdev);
 	netif_tx_start_all_queues(qdev->ndev);
@@ -3346,11 +3426,6 @@ static int ql_get_adapter_resources(struct ql_adapter *qdev)
 		return -ENOMEM;
 	}
 	status = ql_request_irq(qdev);
-	if (status)
-		goto err_irq;
-	return status;
-err_irq:
-	ql_free_mem_resources(qdev);
 	return status;
 }
 
@@ -3414,7 +3489,7 @@ static int ql_configure_rings(struct ql_adapter *qdev)
 
 	for (i = 0; i < qdev->tx_ring_count; i++) {
 		tx_ring = &qdev->tx_ring[i];
-		memset((void *)tx_ring, 0, sizeof(tx_ring));
+		memset((void *)tx_ring, 0, sizeof(*tx_ring));
 		tx_ring->qdev = qdev;
 		tx_ring->wq_id = i;
 		tx_ring->wq_len = qdev->tx_ring_size;
@@ -3430,7 +3505,7 @@ static int ql_configure_rings(struct ql_adapter *qdev)
 
 	for (i = 0; i < qdev->rx_ring_count; i++) {
 		rx_ring = &qdev->rx_ring[i];
-		memset((void *)rx_ring, 0, sizeof(rx_ring));
+		memset((void *)rx_ring, 0, sizeof(*rx_ring));
 		rx_ring->qdev = qdev;
 		rx_ring->cq_id = i;
 		rx_ring->cpu = i % cpu_cnt;	/* CPU to run handler on. */
@@ -3789,7 +3864,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	int pos, err = 0;
 	u16 val16;
 
-	memset((void *)qdev, 0, sizeof(qdev));
+	memset((void *)qdev, 0, sizeof(*qdev));
 	err = pci_enable_device(pdev);
 	if (err) {
 		dev_err(&pdev->dev, "PCI device enable failed.\n");
@@ -3976,7 +4051,7 @@ static int __devinit qlge_probe(struct pci_dev *pdev,
 		pci_disable_device(pdev);
 		return err;
 	}
-	netif_carrier_off(ndev);
+	ql_link_off(qdev);
 	ql_display_dev_info(ndev);
 	cards_found++;
 	return 0;
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 71afbf8b9c5..6685bd97da9 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -238,7 +238,7 @@ static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp)
 				&qdev->mpi_port_cfg_work, 0);
 	}
 
-	netif_carrier_on(qdev->ndev);
+	ql_link_on(qdev);
 }
 
 static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
@@ -251,7 +251,7 @@ static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	if (status)
 		QPRINTK(qdev, DRV, ERR, "Link down AEN broken!\n");
 
-	netif_carrier_off(qdev->ndev);
+	ql_link_off(qdev);
 }
 
 static int ql_sfp_in(struct ql_adapter *qdev, struct mbox_params *mbcp)
@@ -849,7 +849,7 @@ void ql_mpi_idc_work(struct work_struct *work)
 	case MB_CMD_PORT_RESET:
 	case MB_CMD_SET_PORT_CFG:
 	case MB_CMD_STOP_FW:
-		netif_carrier_off(qdev->ndev);
+		ql_link_off(qdev);
 		/* Signal the resulting link up AEN
 		 * that the frame routing and mac addr
 		 * needs to be set.
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index ed63d23a645..961b5397a53 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -49,8 +49,8 @@
 #include <asm/processor.h>
 
 #define DRV_NAME	"r6040"
-#define DRV_VERSION	"0.23"
-#define DRV_RELDATE	"05May2009"
+#define DRV_VERSION	"0.24"
+#define DRV_RELDATE	"08Jul2009"
 
 /* PHY CHIP Address */
 #define PHY1_ADDR	1	/* For MAC1 */
@@ -704,8 +704,11 @@ static irqreturn_t r6040_interrupt(int irq, void *dev_id)
 	/* Read MISR status and clear */
 	status = ioread16(ioaddr + MISR);
 
-	if (status == 0x0000 || status == 0xffff)
+	if (status == 0x0000 || status == 0xffff) {
+		/* Restore RDC MAC interrupt */
+		iowrite16(misr, ioaddr + MIER);
 		return IRQ_NONE;
+	}
 
 	/* RX interrupt request */
 	if (status & RX_INTS) {
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 4b53b58d75f..b82780d805f 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -2060,8 +2060,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
-	pci_set_master(pdev);
-
 	/* ioremap MMIO region */
 	ioaddr = ioremap(pci_resource_start(pdev, region), R8169_REGS_SIZE);
 	if (!ioaddr) {
@@ -2089,6 +2087,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	RTL_W16(IntrStatus, 0xffff);
 
+	pci_set_master(pdev);
+
 	/* Identify chip attached to board */
 	rtl8169_get_mac_version(tp, ioaddr);
 
@@ -3874,6 +3874,15 @@ static void rtl_shutdown(struct pci_dev *pdev)
 	spin_unlock_irq(&tp->lock);
 
 	if (system_state == SYSTEM_POWER_OFF) {
+		/* WoL fails with some 8168 when the receiver is disabled. */
+		if (tp->features & RTL_FEATURE_WOL) {
+			pci_clear_master(pdev);
+
+			RTL_W8(ChipCmd, CmdRxEnb);
+			/* PCI commit */
+			RTL_R8(ChipCmd);
+		}
+
 		pci_wake_from_d3(pdev, true);
 		pci_set_power_state(pdev, PCI_D3hot);
 	}
diff --git a/drivers/net/s6gmac.c b/drivers/net/s6gmac.c
index 5345e47b35a..4525cbe8dd6 100644
--- a/drivers/net/s6gmac.c
+++ b/drivers/net/s6gmac.c
@@ -793,7 +793,7 @@ static inline int s6gmac_phy_start(struct net_device *dev)
 	struct s6gmac *pd = netdev_priv(dev);
 	int i = 0;
 	struct phy_device *p = NULL;
-	while ((!(p = pd->mii.bus->phy_map[i])) && (i < PHY_MAX_ADDR))
+	while ((i < PHY_MAX_ADDR) && (!(p = pd->mii.bus->phy_map[i])))
 		i++;
 	p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link, 0,
 			PHY_INTERFACE_MODE_RGMII);
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 18821f217e1..e3156c97bb5 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -1593,6 +1593,7 @@ out:
 static struct pci_device_id sc92031_pci_device_id_table[] __devinitdata = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x2031) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x8139) },
+	{ PCI_DEVICE(0x1088, 0x2031) },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, sc92031_pci_device_id_table);
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 341882f959f..a2d82ddb3b4 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -865,8 +865,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 	struct sh_eth_cpu_data *cd = mdp->cd;
 	irqreturn_t ret = IRQ_NONE;
-	u32 ioaddr, boguscnt = RX_RING_SIZE;
-	u32 intr_status = 0;
+	u32 ioaddr, intr_status = 0;
 
 	ioaddr = ndev->base_addr;
 	spin_lock(&mdp->lock);
@@ -901,12 +900,6 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 	if (intr_status & cd->eesr_err_check)
 		sh_eth_error(ndev, intr_status);
 
-	if (--boguscnt < 0) {
-		printk(KERN_WARNING
-		       "%s: Too much work at interrupt, status=0x%4.4x.\n",
-		       ndev->name, intr_status);
-	}
-
 other_irq:
 	spin_unlock(&mdp->lock);
 
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 60d502eef4f..543af2044f4 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -3854,8 +3854,10 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
 	skge->speed = -1;
 	skge->advertising = skge_supported_modes(hw);
 
-	if (device_may_wakeup(&hw->pdev->dev))
+	if (device_can_wakeup(&hw->pdev->dev)) {
 		skge->wol = wol_supported(hw) & WAKE_MAGIC;
+		device_set_wakeup_enable(&hw->pdev->dev, skge->wol);
+	}
 
 	hw->dev[port] = dev;
 
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 7681d28c53d..0a551d8f5d9 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1151,14 +1151,7 @@ stopped:
 
 	/* reset the Rx prefetch unit */
 	sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
-
-	/* Reset the RAM Buffer receive queue */
-	sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_RST_SET);
-
-	/* Reset Rx MAC FIFO */
-	sky2_write8(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), GMF_RST_SET);
-
-	sky2_read8(hw, B0_CTST);
+	mmiowb();
 }
 
 /* Clean out receive buffer area, assumes receiver hardware stopped */
@@ -1495,6 +1488,8 @@ static int sky2_up(struct net_device *dev)
 	sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
 #endif
 
+	sky2->restarting = 0;
+
 	err = sky2_rx_start(sky2);
 	if (err)
 		goto err_out;
@@ -1507,6 +1502,9 @@ static int sky2_up(struct net_device *dev)
 
 	sky2_set_multicast(dev);
 
+	/* wake queue incase we are restarting */
+	netif_wake_queue(dev);
+
 	if (netif_msg_ifup(sky2))
 		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
 	return 0;
@@ -1540,6 +1538,8 @@ static inline int tx_dist(unsigned tail, unsigned head)
 /* Number of list elements available for next tx */
 static inline int tx_avail(const struct sky2_port *sky2)
 {
+	if (unlikely(sky2->restarting))
+		return 0;
 	return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod);
 }
 
@@ -1825,11 +1825,9 @@ static int sky2_down(struct net_device *dev)
 	if (netif_msg_ifdown(sky2))
 		printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
 
-	/* Disable port IRQ */
-	imask = sky2_read32(hw, B0_IMSK);
-	imask &= ~portirq_msk[port];
-	sky2_write32(hw, B0_IMSK, imask);
-	sky2_read32(hw, B0_IMSK);
+	/* explicitly shut off tx incase we're restarting */
+	sky2->restarting = 1;
+	netif_tx_disable(dev);
 
 	/* Force flow control off */
 	sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
@@ -1870,8 +1868,6 @@ static int sky2_down(struct net_device *dev)
 
 	sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
 
-	sky2_rx_stop(sky2);
-
 	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
 	sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
 
@@ -1881,6 +1877,14 @@ static int sky2_down(struct net_device *dev)
 	sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
 	sky2_read8(hw, STAT_ISR_TIMER_CTRL);
 
+	sky2_rx_stop(sky2);
+
+	/* Disable port IRQ */
+	imask = sky2_read32(hw, B0_IMSK);
+	imask &= ~portirq_msk[port];
+	sky2_write32(hw, B0_IMSK, imask);
+	sky2_read32(hw, B0_IMSK);
+
 	synchronize_irq(hw->pdev->irq);
 	napi_synchronize(&hw->napi);
 
@@ -2366,7 +2370,7 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
 
-	if (netif_running(dev)) {
+	if (likely(netif_running(dev) && !sky2->restarting)) {
 		netif_tx_lock(dev);
 		sky2_tx_complete(sky2, last);
 		netif_tx_unlock(dev);
@@ -2495,7 +2499,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 			if (likely(status >> 16 == (status & 0xffff))) {
 				skb = sky2->rx_ring[sky2->rx_next].skb;
 				skb->ip_summed = CHECKSUM_COMPLETE;
-				skb->csum = status & 0xffff;
+				skb->csum = le16_to_cpu(status);
 			} else {
 				printk(KERN_NOTICE PFX "%s: hardware receive "
 				       "checksum problem (status = %#x)\n",
@@ -4290,6 +4294,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 	spin_lock_init(&sky2->phy_lock);
 	sky2->tx_pending = TX_DEF_PENDING;
 	sky2->rx_pending = RX_DEF_PENDING;
+	sky2->restarting = 0;
 
 	hw->dev[port] = dev;
 
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index b5549c9e510..4486b066b43 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2051,6 +2051,7 @@ struct sky2_port {
 	u8		     duplex;	/* DUPLEX_HALF, DUPLEX_FULL */
 	u8		     rx_csum;
 	u8		     wol;
+	u8		     restarting;
  	enum flow_control    flow_mode;
  	enum flow_control    flow_status;
 
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index fdcbaf8dfa7..7567f510eff 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -196,21 +196,23 @@ static void PRINT_PKT(u_char *buf, int length)
 /* this enables an interrupt in the interrupt mask register */
 #define SMC_ENABLE_INT(lp, x) do {					\
 	unsigned char mask;						\
-	spin_lock_irq(&lp->lock);					\
+	unsigned long smc_enable_flags;					\
+	spin_lock_irqsave(&lp->lock, smc_enable_flags);			\
 	mask = SMC_GET_INT_MASK(lp);					\
 	mask |= (x);							\
 	SMC_SET_INT_MASK(lp, mask);					\
-	spin_unlock_irq(&lp->lock);					\
+	spin_unlock_irqrestore(&lp->lock, smc_enable_flags);		\
 } while (0)
 
 /* this disables an interrupt from the interrupt mask register */
 #define SMC_DISABLE_INT(lp, x) do {					\
 	unsigned char mask;						\
-	spin_lock_irq(&lp->lock);					\
+	unsigned long smc_disable_flags;				\
+	spin_lock_irqsave(&lp->lock, smc_disable_flags);		\
 	mask = SMC_GET_INT_MASK(lp);					\
 	mask &= ~(x);							\
 	SMC_SET_INT_MASK(lp, mask);					\
-	spin_unlock_irq(&lp->lock);					\
+	spin_unlock_irqrestore(&lp->lock, smc_disable_flags);		\
 } while (0)
 
 /*
@@ -520,21 +522,21 @@ static inline void  smc_rcv(struct net_device *dev)
  * any other concurrent access and C would always interrupt B. But life
  * isn't that easy in a SMP world...
  */
-#define smc_special_trylock(lock)					\
+#define smc_special_trylock(lock, flags)				\
 ({									\
 	int __ret;							\
-	local_irq_disable();						\
+	local_irq_save(flags);						\
 	__ret = spin_trylock(lock);					\
 	if (!__ret)							\
-		local_irq_enable();					\
+		local_irq_restore(flags);				\
 	__ret;								\
 })
-#define smc_special_lock(lock)		spin_lock_irq(lock)
-#define smc_special_unlock(lock)	spin_unlock_irq(lock)
+#define smc_special_lock(lock, flags)		spin_lock_irqsave(lock, flags)
+#define smc_special_unlock(lock, flags) 	spin_unlock_irqrestore(lock, flags)
 #else
-#define smc_special_trylock(lock)	(1)
-#define smc_special_lock(lock)		do { } while (0)
-#define smc_special_unlock(lock)	do { } while (0)
+#define smc_special_trylock(lock, flags)	(1)
+#define smc_special_lock(lock, flags)   	do { } while (0)
+#define smc_special_unlock(lock, flags)	do { } while (0)
 #endif
 
 /*
@@ -548,10 +550,11 @@ static void smc_hardware_send_pkt(unsigned long data)
 	struct sk_buff *skb;
 	unsigned int packet_no, len;
 	unsigned char *buf;
+	unsigned long flags;
 
 	DBG(3, "%s: %s\n", dev->name, __func__);
 
-	if (!smc_special_trylock(&lp->lock)) {
+	if (!smc_special_trylock(&lp->lock, flags)) {
 		netif_stop_queue(dev);
 		tasklet_schedule(&lp->tx_task);
 		return;
@@ -559,7 +562,7 @@ static void smc_hardware_send_pkt(unsigned long data)
 
 	skb = lp->pending_tx_skb;
 	if (unlikely(!skb)) {
-		smc_special_unlock(&lp->lock);
+		smc_special_unlock(&lp->lock, flags);
 		return;
 	}
 	lp->pending_tx_skb = NULL;
@@ -569,7 +572,7 @@ static void smc_hardware_send_pkt(unsigned long data)
 		printk("%s: Memory allocation failed.\n", dev->name);
 		dev->stats.tx_errors++;
 		dev->stats.tx_fifo_errors++;
-		smc_special_unlock(&lp->lock);
+		smc_special_unlock(&lp->lock, flags);
 		goto done;
 	}
 
@@ -608,7 +611,7 @@ static void smc_hardware_send_pkt(unsigned long data)
 
 	/* queue the packet for TX */
 	SMC_SET_MMU_CMD(lp, MC_ENQUEUE);
-	smc_special_unlock(&lp->lock);
+	smc_special_unlock(&lp->lock, flags);
 
 	dev->trans_start = jiffies;
 	dev->stats.tx_packets++;
@@ -633,6 +636,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct smc_local *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->base;
 	unsigned int numPages, poll_count, status;
+	unsigned long flags;
 
 	DBG(3, "%s: %s\n", dev->name, __func__);
 
@@ -658,7 +662,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		return 0;
 	}
 
-	smc_special_lock(&lp->lock);
+	smc_special_lock(&lp->lock, flags);
 
 	/* now, try to allocate the memory */
 	SMC_SET_MMU_CMD(lp, MC_ALLOC | numPages);
@@ -676,7 +680,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		}
    	} while (--poll_count);
 
-	smc_special_unlock(&lp->lock);
+	smc_special_unlock(&lp->lock, flags);
 
 	lp->pending_tx_skb = skb;
    	if (!poll_count) {
@@ -1774,6 +1778,7 @@ static const struct net_device_ops smc_netdev_ops = {
 	.ndo_start_xmit		= smc_hard_start_xmit,
 	.ndo_tx_timeout		= smc_timeout,
 	.ndo_set_multicast_list	= smc_set_multicast_list,
+	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index f1f773b17fe..57a159fac99 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -186,7 +186,8 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 #define SMC_outsb(a, r, p, l)	writesb((a) + (r), p, (l))
 #define SMC_IRQ_FLAGS		(-1)	/* from resource */
 
-#elif	defined(CONFIG_MACH_LOGICPD_PXA270)
+#elif	defined(CONFIG_MACH_LOGICPD_PXA270) \
+	|| defined(CONFIG_MACH_NOMADIK_8815NHK)
 
 #define SMC_CAN_USE_8BIT	0
 #define SMC_CAN_USE_16BIT	1
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index b60639bd181..94b6d2658dd 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1779,6 +1779,7 @@ static const struct net_device_ops smsc911x_netdev_ops = {
 	.ndo_get_stats		= smsc911x_get_stats,
 	.ndo_set_multicast_list	= smsc911x_set_multicast_list,
 	.ndo_do_ioctl		= smsc911x_do_ioctl,
+	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= smsc911x_set_mac_address,
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -1938,7 +1939,7 @@ static int __devexit smsc911x_drv_remove(struct platform_device *pdev)
 	if (!res)
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
-	release_mem_region(res->start, res->end - res->start);
+	release_mem_region(res->start, resource_size(res));
 
 	iounmap(pdata->ioaddr);
 
@@ -1976,7 +1977,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 		retval = -ENODEV;
 		goto out_0;
 	}
-	res_size = res->end - res->start + 1;
+	res_size = resource_size(res);
 
 	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!irq_res) {
@@ -2104,7 +2105,7 @@ out_unmap_io_3:
 out_free_netdev_2:
 	free_netdev(dev);
 out_release_io_1:
-	release_mem_region(res->start, res->end - res->start);
+	release_mem_region(res->start, resource_size(res));
 out_0:
 	return retval;
 }
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 838cce8b8ff..669253c7bd4 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -180,7 +180,7 @@ static int full_duplex[MAX_UNITS] = {0, };
 /* These identify the driver base version and may not be removed. */
 static const char version[] __devinitconst =
 KERN_INFO "starfire.c:v1.03 7/26/2000  Written by Donald Becker <becker@scyld.com>\n"
-KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
+" (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
 
 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
 MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver");
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 545f81b34ad..d1521c3875b 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -1698,13 +1698,13 @@ static int netdev_close(struct net_device *dev)
 
 #ifdef __i386__
 	if (netif_msg_hw(np)) {
-		printk("\n"KERN_DEBUG"  Tx ring at %8.8x:\n",
+		printk(KERN_DEBUG "  Tx ring at %8.8x:\n",
 			   (int)(np->tx_ring_dma));
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(" #%d desc. %4.4x %8.8x %8.8x.\n",
+			printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n",
 				   i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr,
 				   np->tx_ring[i].frag[0].length);
-		printk("\n"KERN_DEBUG "  Rx ring %8.8x:\n",
+		printk(KERN_DEBUG "  Rx ring %8.8x:\n",
 			   (int)(np->rx_ring_dma));
 		for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) {
 			printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
diff --git a/drivers/net/sunvnet.c b/drivers/net/sunvnet.c
index a82fb2aca4c..f1e5e4542c2 100644
--- a/drivers/net/sunvnet.c
+++ b/drivers/net/sunvnet.c
@@ -1016,7 +1016,9 @@ static const struct net_device_ops vnet_ops = {
 	.ndo_open		= vnet_open,
 	.ndo_stop		= vnet_close,
 	.ndo_set_multicast_list	= vnet_set_rx_mode,
+	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= vnet_set_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_tx_timeout		= vnet_tx_timeout,
 	.ndo_change_mtu		= vnet_change_mtu,
 	.ndo_start_xmit		= vnet_start_xmit,
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 9d896116cf7..08a6c41c159 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -1912,7 +1912,7 @@ static int __init ibmtr_init(void)
 
 	find_turbo_adapters(io);
 
-	for (i = 0; io[i] && (i < IBMTR_MAX_ADAPTERS); i++) {
+	for (i = 0; i < IBMTR_MAX_ADAPTERS && io[i]; i++) {
 		struct net_device *dev;
 		irq[i] = 0;
 		mem[i] = 0;
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 0f78f99f9b2..7030bd5e984 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -1132,7 +1132,9 @@ static int tsi108_get_mac(struct net_device *dev)
 	}
 
 	if (!is_valid_ether_addr(dev->dev_addr)) {
-		printk("KERN_ERR: word1: %08x, word2: %08x\n", word1, word2);
+		printk(KERN_ERR
+		       "%s: Invalid MAC address. word1: %08x, word2: %08x\n",
+		       dev->name, word1, word2);
 		return -EINVAL;
 	}
 
@@ -1201,8 +1203,8 @@ static void tsi108_set_rx_mode(struct net_device *dev)
 				__set_bit(hash, &data->mc_hash[0]);
 			} else {
 				printk(KERN_ERR
-				       "%s: got multicast address of length %d "
-				       "instead of 6.\n", dev->name,
+		"%s: got multicast address of length %d instead of 6.\n",
+				       dev->name,
 				       mc->dmi_addrlen);
 			}
 
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 81f054dbb88..ef49744a508 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -944,9 +944,10 @@ static void de_set_media (struct de_private *de)
 		macmode &= ~FullDuplex;
 
 	if (netif_msg_link(de)) {
-		printk(KERN_INFO "%s: set link %s\n"
-		       KERN_INFO "%s:    mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n"
-		       KERN_INFO "%s:    set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
+		printk(KERN_INFO
+		       "%s: set link %s\n"
+		       "%s:    mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n"
+		       "%s:    set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
 		       de->dev->name, media_name[media],
 		       de->dev->name, dr32(MacMode), dr32(SIAStatus),
 		       dr32(CSR13), dr32(CSR14), dr32(CSR15),
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index eb72d2e9ab3..acfdccd4456 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -5059,7 +5059,7 @@ mii_get_phy(struct net_device *dev)
 	if ((id == 0) || (id == 65535)) continue;  /* Valid ID? */
 	for (j=0; j<limit; j++) {                  /* Search PHY table */
 	    if (id != phy_info[j].id) continue;    /* ID match? */
-	    for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++);
+	    for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
 	    if (k < DE4X5_MAX_PHY) {
 		memcpy((char *)&lp->phy[k],
 		       (char *)&phy_info[j], sizeof(struct phy_table));
@@ -5072,7 +5072,7 @@ mii_get_phy(struct net_device *dev)
 	    break;
 	}
 	if ((j == limit) && (i < DE4X5_MAX_MII)) {
-	    for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++);
+	    for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
 	    lp->phy[k].addr = i;
 	    lp->phy[k].id = id;
 	    lp->phy[k].spd.reg = GENERIC_REG;      /* ANLPA register         */
@@ -5091,7 +5091,7 @@ mii_get_phy(struct net_device *dev)
   purgatory:
     lp->active = 0;
     if (lp->phy[0].id) {                           /* Reset the PHY devices */
-	for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++) { /*For each PHY*/
+	for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++) { /*For each PHY*/
 	    mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII);
 	    while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST);
 
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 2abb5d3becc..4cf9a658875 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -570,16 +570,18 @@ static void tulip_tx_timeout(struct net_device *dev)
 				   (unsigned int)tp->rx_ring[i].buffer2,
 				   buf[0], buf[1], buf[2]);
 			for (j = 0; buf[j] != 0xee && j < 1600; j++)
-				if (j < 100) printk(" %2.2x", buf[j]);
-			printk(" j=%d.\n", j);
+				if (j < 100)
+					printk(KERN_CONT " %2.2x", buf[j]);
+			printk(KERN_CONT " j=%d.\n", j);
 		}
 		printk(KERN_DEBUG "  Rx ring %8.8x: ", (int)tp->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++)
-			printk(" %8.8x", (unsigned int)tp->rx_ring[i].status);
-		printk("\n" KERN_DEBUG "  Tx ring %8.8x: ", (int)tp->tx_ring);
+			printk(KERN_CONT " %8.8x",
+			       (unsigned int)tp->rx_ring[i].status);
+		printk(KERN_DEBUG "  Tx ring %8.8x: ", (int)tp->tx_ring);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(" %8.8x", (unsigned int)tp->tx_ring[i].status);
-		printk("\n");
+			printk(KERN_CONT " %8.8x", (unsigned int)tp->tx_ring[i].status);
+		printk(KERN_CONT "\n");
 	}
 #endif
 
@@ -650,8 +652,9 @@ tulip_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int entry;
 	u32 flag;
 	dma_addr_t mapping;
+	unsigned long flags;
 
-	spin_lock_irq(&tp->lock);
+	spin_lock_irqsave(&tp->lock, flags);
 
 	/* Calculate the next Tx descriptor entry. */
 	entry = tp->cur_tx % TX_RING_SIZE;
@@ -686,7 +689,7 @@ tulip_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Trigger an immediate transmit demand. */
 	iowrite32(0, tp->base_addr + CSR1);
 
-	spin_unlock_irq(&tp->lock);
+	spin_unlock_irqrestore(&tp->lock, flags);
 
 	dev->trans_start = jiffies;
 
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 842b1a2c40d..0f15773dae5 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -142,7 +142,7 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 static const char version[] __initconst =
 	KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) "
 	DRV_RELDATE "  Donald Becker <becker@scyld.com>\n"
-	KERN_INFO "  http://www.scyld.com/network/drivers.html\n";
+	"  http://www.scyld.com/network/drivers.html\n";
 
 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
 MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver");
@@ -939,7 +939,7 @@ static void tx_timeout(struct net_device *dev)
 		printk(KERN_DEBUG "  Rx ring %p: ", np->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++)
 			printk(" %8.8x", (unsigned int)np->rx_ring[i].status);
-		printk("\n"KERN_DEBUG"  Tx ring %p: ", np->tx_ring);
+		printk(KERN_DEBUG"  Tx ring %p: ", np->tx_ring);
 		for (i = 0; i < TX_RING_SIZE; i++)
 			printk(" %8.8x", np->tx_ring[i].status);
 		printk("\n");
@@ -1520,7 +1520,7 @@ static int netdev_close(struct net_device *dev)
 			printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x.\n",
 				   i, np->tx_ring[i].length,
 				   np->tx_ring[i].status, np->tx_ring[i].buffer1);
-		printk("\n"KERN_DEBUG "  Rx ring %8.8x:\n",
+		printk(KERN_DEBUG "  Rx ring %8.8x:\n",
 			   (int)np->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++) {
 			printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 11a0ba47b67..42b6c6319bc 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -486,12 +486,14 @@ static unsigned int tun_chr_poll(struct file *file, poll_table * wait)
 {
 	struct tun_file *tfile = file->private_data;
 	struct tun_struct *tun = __tun_get(tfile);
-	struct sock *sk = tun->sk;
+	struct sock *sk;
 	unsigned int mask = 0;
 
 	if (!tun)
 		return POLLERR;
 
+	sk = tun->sk;
+
 	DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name);
 
 	poll_wait(file, &tun->socket.wait, wait);
@@ -1046,20 +1048,15 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 	return err;
 }
 
-static int tun_get_iff(struct net *net, struct file *file, struct ifreq *ifr)
+static int tun_get_iff(struct net *net, struct tun_struct *tun,
+		       struct ifreq *ifr)
 {
-	struct tun_struct *tun = tun_get(file);
-
-	if (!tun)
-		return -EBADFD;
-
 	DBG(KERN_INFO "%s: tun_get_iff\n", tun->dev->name);
 
 	strcpy(ifr->ifr_name, tun->dev->name);
 
 	ifr->ifr_flags = tun_flags(tun);
 
-	tun_put(tun);
 	return 0;
 }
 
@@ -1103,8 +1100,8 @@ static int set_offload(struct net_device *dev, unsigned long arg)
 	return 0;
 }
 
-static int tun_chr_ioctl(struct inode *inode, struct file *file,
-			 unsigned int cmd, unsigned long arg)
+static long tun_chr_ioctl(struct file *file, unsigned int cmd,
+			  unsigned long arg)
 {
 	struct tun_file *tfile = file->private_data;
 	struct tun_struct *tun;
@@ -1126,34 +1123,32 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 				(unsigned int __user*)argp);
 	}
 
+	rtnl_lock();
+
 	tun = __tun_get(tfile);
 	if (cmd == TUNSETIFF && !tun) {
-		int err;
-
 		ifr.ifr_name[IFNAMSIZ-1] = '\0';
 
-		rtnl_lock();
-		err = tun_set_iff(tfile->net, file, &ifr);
-		rtnl_unlock();
+		ret = tun_set_iff(tfile->net, file, &ifr);
 
-		if (err)
-			return err;
+		if (ret)
+			goto unlock;
 
 		if (copy_to_user(argp, &ifr, sizeof(ifr)))
-			return -EFAULT;
-		return 0;
+			ret = -EFAULT;
+		goto unlock;
 	}
 
-
+	ret = -EBADFD;
 	if (!tun)
-		return -EBADFD;
+		goto unlock;
 
 	DBG(KERN_INFO "%s: tun_chr_ioctl cmd %d\n", tun->dev->name, cmd);
 
 	ret = 0;
 	switch (cmd) {
 	case TUNGETIFF:
-		ret = tun_get_iff(current->nsproxy->net_ns, file, &ifr);
+		ret = tun_get_iff(current->nsproxy->net_ns, tun, &ifr);
 		if (ret)
 			break;
 
@@ -1199,7 +1194,6 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 
 	case TUNSETLINK:
 		/* Only allow setting the type when the interface is down */
-		rtnl_lock();
 		if (tun->dev->flags & IFF_UP) {
 			DBG(KERN_INFO "%s: Linktype set failed because interface is up\n",
 				tun->dev->name);
@@ -1209,7 +1203,6 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 			DBG(KERN_INFO "%s: linktype set to %d\n", tun->dev->name, tun->dev->type);
 			ret = 0;
 		}
-		rtnl_unlock();
 		break;
 
 #ifdef TUN_DEBUG
@@ -1218,9 +1211,7 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 		break;
 #endif
 	case TUNSETOFFLOAD:
-		rtnl_lock();
 		ret = set_offload(tun->dev, arg);
-		rtnl_unlock();
 		break;
 
 	case TUNSETTXFILTER:
@@ -1228,9 +1219,7 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 		ret = -EINVAL;
 		if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV)
 			break;
-		rtnl_lock();
 		ret = update_filter(&tun->txflt, (void __user *)arg);
-		rtnl_unlock();
 		break;
 
 	case SIOCGIFHWADDR:
@@ -1246,9 +1235,7 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 		DBG(KERN_DEBUG "%s: set hw address: %pM\n",
 			tun->dev->name, ifr.ifr_hwaddr.sa_data);
 
-		rtnl_lock();
 		ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr);
-		rtnl_unlock();
 		break;
 
 	case TUNGETSNDBUF:
@@ -1271,7 +1258,10 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 		break;
 	};
 
-	tun_put(tun);
+unlock:
+	rtnl_unlock();
+	if (tun)
+		tun_put(tun);
 	return ret;
 }
 
@@ -1324,20 +1314,22 @@ static int tun_chr_close(struct inode *inode, struct file *file)
 	struct tun_file *tfile = file->private_data;
 	struct tun_struct *tun;
 
-
-	rtnl_lock();
 	tun = __tun_get(tfile);
 	if (tun) {
-		DBG(KERN_INFO "%s: tun_chr_close\n", tun->dev->name);
+		struct net_device *dev = tun->dev;
+
+		DBG(KERN_INFO "%s: tun_chr_close\n", dev->name);
 
 		__tun_detach(tun);
 
 		/* If desireable, unregister the netdevice. */
-		if (!(tun->flags & TUN_PERSIST))
-			unregister_netdevice(tun->dev);
-
+		if (!(tun->flags & TUN_PERSIST)) {
+			rtnl_lock();
+			if (dev->reg_state == NETREG_REGISTERED)
+				unregister_netdevice(dev);
+			rtnl_unlock();
+		}
 	}
-	rtnl_unlock();
 
 	tun = tfile->tun;
 	if (tun)
@@ -1357,7 +1349,7 @@ static const struct file_operations tun_fops = {
 	.write = do_sync_write,
 	.aio_write = tun_chr_aio_write,
 	.poll	= tun_chr_poll,
-	.ioctl	= tun_chr_ioctl,
+	.unlocked_ioctl = tun_chr_ioctl,
 	.open	= tun_chr_open,
 	.release = tun_chr_close,
 	.fasync = tun_chr_fasync
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 40c6eba775c..8a7b8c7bd78 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1590,13 +1590,13 @@ static int init_phy(struct net_device *dev)
 	priv->oldspeed = 0;
 	priv->oldduplex = -1;
 
-	if (!ug_info->phy_node)
-		return 0;
-
 	phydev = of_phy_connect(dev, ug_info->phy_node, &adjust_link, 0,
 				priv->phy_interface);
+	if (!phydev)
+		phydev = of_phy_connect_fixed_link(dev, &adjust_link,
+						   priv->phy_interface);
 	if (!phydev) {
-		printk("%s: Could not attach to PHY\n", dev->name);
+		dev_err(&dev->dev, "Could not attach to PHY\n");
 		return -ENODEV;
 	}
 
@@ -3111,10 +3111,11 @@ static int ucc_geth_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	u8 __iomem *bd;			/* BD pointer */
 	u32 bd_status;
 	u8 txQ = 0;
+	unsigned long flags;
 
 	ugeth_vdbg("%s: IN", __func__);
 
-	spin_lock_irq(&ugeth->lock);
+	spin_lock_irqsave(&ugeth->lock, flags);
 
 	dev->stats.tx_bytes += skb->len;
 
@@ -3171,7 +3172,7 @@ static int ucc_geth_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	uccf = ugeth->uccf;
 	out_be16(uccf->p_utodr, UCC_FAST_TOD);
 #endif
-	spin_unlock_irq(&ugeth->lock);
+	spin_unlock_irqrestore(&ugeth->lock, flags);
 
 	return 0;
 }
@@ -3608,9 +3609,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 	struct ucc_geth_private *ugeth = NULL;
 	struct ucc_geth_info *ug_info;
 	struct resource res;
-	struct device_node *phy;
 	int err, ucc_num, max_speed = 0;
-	const u32 *fixed_link;
 	const unsigned int *prop;
 	const char *sprop;
 	const void *mac_addr;
@@ -3708,15 +3707,8 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 
 	ug_info->uf_info.regs = res.start;
 	ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
-	fixed_link = of_get_property(np, "fixed-link", NULL);
-	if (fixed_link) {
-		phy = NULL;
-	} else {
-		phy = of_parse_phandle(np, "phy-handle", 0);
-		if (phy == NULL)
-			return -ENODEV;
-	}
-	ug_info->phy_node = phy;
+
+	ug_info->phy_node = of_parse_phandle(np, "phy-handle", 0);
 
 	/* Find the TBI PHY node.  If it's not there, we don't support SGMII */
 	ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
@@ -3725,7 +3717,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 	prop = of_get_property(np, "phy-connection-type", NULL);
 	if (!prop) {
 		/* handle interface property present in old trees */
-		prop = of_get_property(phy, "interface", NULL);
+		prop = of_get_property(ug_info->phy_node, "interface", NULL);
 		if (prop != NULL) {
 			phy_interface = enet_to_phy_interface[*prop];
 			max_speed = enet_to_speed[*prop];
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index a906d399813..c47237c2d63 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -369,4 +369,12 @@ config USB_NET_INT51X1
 	  (Powerline Communications) solution with an Intellon
 	  INT51x1/INT5200 chip, like the "devolo dLan duo".
 
+config USB_CDC_PHONET
+	tristate "CDC Phonet support"
+	depends on PHONET
+	help
+	  Choose this option to support the Phonet interface to a Nokia
+	  cellular modem, as found on most Nokia handsets with the
+	  "PC suite" USB profile.
+
 endmenu
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index b870b0b1cbe..e17afb78f37 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -21,4 +21,5 @@ obj-$(CONFIG_USB_NET_ZAURUS)	+= zaurus.o
 obj-$(CONFIG_USB_NET_MCS7830)	+= mcs7830.o
 obj-$(CONFIG_USB_USBNET)	+= usbnet.o
 obj-$(CONFIG_USB_NET_INT51X1)	+= int51x1.o
+obj-$(CONFIG_USB_CDC_PHONET)	+= cdc-phonet.o
 
diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c
new file mode 100644
index 00000000000..792af72da8a
--- /dev/null
+++ b/drivers/net/usb/cdc-phonet.c
@@ -0,0 +1,461 @@
+/*
+ * phonet.c -- USB CDC Phonet host driver
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation. All rights reserved.
+ *
+ * Author: Rémi Denis-Courmont
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_phonet.h>
+
+#define PN_MEDIA_USB	0x1B
+
+static const unsigned rxq_size = 17;
+
+struct usbpn_dev {
+	struct net_device	*dev;
+
+	struct usb_interface	*intf, *data_intf;
+	struct usb_device	*usb;
+	unsigned int		tx_pipe, rx_pipe;
+	u8 active_setting;
+	u8 disconnected;
+
+	unsigned		tx_queue;
+	spinlock_t		tx_lock;
+
+	spinlock_t		rx_lock;
+	struct sk_buff		*rx_skb;
+	struct urb		*urbs[0];
+};
+
+static void tx_complete(struct urb *req);
+static void rx_complete(struct urb *req);
+
+/*
+ * Network device callbacks
+ */
+static int usbpn_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct usbpn_dev *pnd = netdev_priv(dev);
+	struct urb *req = NULL;
+	unsigned long flags;
+	int err;
+
+	if (skb->protocol != htons(ETH_P_PHONET))
+		goto drop;
+
+	req = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!req)
+		goto drop;
+	usb_fill_bulk_urb(req, pnd->usb, pnd->tx_pipe, skb->data, skb->len,
+				tx_complete, skb);
+	req->transfer_flags = URB_ZERO_PACKET;
+	err = usb_submit_urb(req, GFP_ATOMIC);
+	if (err) {
+		usb_free_urb(req);
+		goto drop;
+	}
+
+	spin_lock_irqsave(&pnd->tx_lock, flags);
+	pnd->tx_queue++;
+	if (pnd->tx_queue >= dev->tx_queue_len)
+		netif_stop_queue(dev);
+	spin_unlock_irqrestore(&pnd->tx_lock, flags);
+	return 0;
+
+drop:
+	dev_kfree_skb(skb);
+	dev->stats.tx_dropped++;
+	return 0;
+}
+
+static void tx_complete(struct urb *req)
+{
+	struct sk_buff *skb = req->context;
+	struct net_device *dev = skb->dev;
+	struct usbpn_dev *pnd = netdev_priv(dev);
+
+	switch (req->status) {
+	case 0:
+		dev->stats.tx_bytes += skb->len;
+		break;
+
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dev->stats.tx_aborted_errors++;
+	default:
+		dev->stats.tx_errors++;
+		dev_dbg(&dev->dev, "TX error (%d)\n", req->status);
+	}
+	dev->stats.tx_packets++;
+
+	spin_lock(&pnd->tx_lock);
+	pnd->tx_queue--;
+	netif_wake_queue(dev);
+	spin_unlock(&pnd->tx_lock);
+
+	dev_kfree_skb_any(skb);
+	usb_free_urb(req);
+}
+
+static int rx_submit(struct usbpn_dev *pnd, struct urb *req, gfp_t gfp_flags)
+{
+	struct net_device *dev = pnd->dev;
+	struct page *page;
+	int err;
+
+	page = __netdev_alloc_page(dev, gfp_flags);
+	if (!page)
+		return -ENOMEM;
+
+	usb_fill_bulk_urb(req, pnd->usb, pnd->rx_pipe, page_address(page),
+				PAGE_SIZE, rx_complete, dev);
+	req->transfer_flags = 0;
+	err = usb_submit_urb(req, gfp_flags);
+	if (unlikely(err)) {
+		dev_dbg(&dev->dev, "RX submit error (%d)\n", err);
+		netdev_free_page(dev, page);
+	}
+	return err;
+}
+
+static void rx_complete(struct urb *req)
+{
+	struct net_device *dev = req->context;
+	struct usbpn_dev *pnd = netdev_priv(dev);
+	struct page *page = virt_to_page(req->transfer_buffer);
+	struct sk_buff *skb;
+	unsigned long flags;
+
+	switch (req->status) {
+	case 0:
+		spin_lock_irqsave(&pnd->rx_lock, flags);
+		skb = pnd->rx_skb;
+		if (!skb) {
+			skb = pnd->rx_skb = netdev_alloc_skb(dev, 12);
+			if (likely(skb)) {
+				/* Can't use pskb_pull() on page in IRQ */
+				memcpy(skb_put(skb, 1), page_address(page), 1);
+				skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+						page, 1, req->actual_length);
+				page = NULL;
+			}
+		} else {
+			skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+					page, 0, req->actual_length);
+			page = NULL;
+		}
+		if (req->actual_length < PAGE_SIZE)
+			pnd->rx_skb = NULL; /* Last fragment */
+		else
+			skb = NULL;
+		spin_unlock_irqrestore(&pnd->rx_lock, flags);
+		if (skb) {
+			skb->protocol = htons(ETH_P_PHONET);
+			skb_reset_mac_header(skb);
+			__skb_pull(skb, 1);
+			skb->dev = dev;
+			dev->stats.rx_packets++;
+			dev->stats.rx_bytes += skb->len;
+
+			netif_rx(skb);
+		}
+		goto resubmit;
+
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		req = NULL;
+		break;
+
+	case -EOVERFLOW:
+		dev->stats.rx_over_errors++;
+		dev_dbg(&dev->dev, "RX overflow\n");
+		break;
+
+	case -EILSEQ:
+		dev->stats.rx_crc_errors++;
+		break;
+	}
+
+	dev->stats.rx_errors++;
+resubmit:
+	if (page)
+		netdev_free_page(dev, page);
+	if (req)
+		rx_submit(pnd, req, GFP_ATOMIC);
+}
+
+static int usbpn_close(struct net_device *dev);
+
+static int usbpn_open(struct net_device *dev)
+{
+	struct usbpn_dev *pnd = netdev_priv(dev);
+	int err;
+	unsigned i;
+	unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber;
+
+	err = usb_set_interface(pnd->usb, num, pnd->active_setting);
+	if (err)
+		return err;
+
+	for (i = 0; i < rxq_size; i++) {
+		struct urb *req = usb_alloc_urb(0, GFP_KERNEL);
+
+		if (!req || rx_submit(pnd, req, GFP_KERNEL)) {
+			usbpn_close(dev);
+			return -ENOMEM;
+		}
+		pnd->urbs[i] = req;
+	}
+
+	netif_wake_queue(dev);
+	return 0;
+}
+
+static int usbpn_close(struct net_device *dev)
+{
+	struct usbpn_dev *pnd = netdev_priv(dev);
+	unsigned i;
+	unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber;
+
+	netif_stop_queue(dev);
+
+	for (i = 0; i < rxq_size; i++) {
+		struct urb *req = pnd->urbs[i];
+
+		if (!req)
+			continue;
+		usb_kill_urb(req);
+		usb_free_urb(req);
+		pnd->urbs[i] = NULL;
+	}
+
+	return usb_set_interface(pnd->usb, num, !pnd->active_setting);
+}
+
+static int usbpn_set_mtu(struct net_device *dev, int new_mtu)
+{
+	if ((new_mtu < PHONET_MIN_MTU) || (new_mtu > PHONET_MAX_MTU))
+		return -EINVAL;
+
+	dev->mtu = new_mtu;
+	return 0;
+}
+
+static const struct net_device_ops usbpn_ops = {
+	.ndo_open	= usbpn_open,
+	.ndo_stop	= usbpn_close,
+	.ndo_start_xmit = usbpn_xmit,
+	.ndo_change_mtu = usbpn_set_mtu,
+};
+
+static void usbpn_setup(struct net_device *dev)
+{
+	dev->features		= 0;
+	dev->netdev_ops		= &usbpn_ops,
+	dev->header_ops		= &phonet_header_ops;
+	dev->type		= ARPHRD_PHONET;
+	dev->flags		= IFF_POINTOPOINT | IFF_NOARP;
+	dev->mtu		= PHONET_MAX_MTU;
+	dev->hard_header_len	= 1;
+	dev->dev_addr[0]	= PN_MEDIA_USB;
+	dev->addr_len		= 1;
+	dev->tx_queue_len	= 3;
+
+	dev->destructor		= free_netdev;
+}
+
+/*
+ * USB driver callbacks
+ */
+static struct usb_device_id usbpn_ids[] = {
+	{
+		.match_flags = USB_DEVICE_ID_MATCH_VENDOR
+			| USB_DEVICE_ID_MATCH_INT_CLASS
+			| USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+		.idVendor = 0x0421, /* Nokia */
+		.bInterfaceClass = USB_CLASS_COMM,
+		.bInterfaceSubClass = 0xFE,
+	},
+	{ },
+};
+
+MODULE_DEVICE_TABLE(usb, usbpn_ids);
+
+static struct usb_driver usbpn_driver;
+
+int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	static const char ifname[] = "usbpn%d";
+	const struct usb_cdc_union_desc *union_header = NULL;
+	const struct usb_cdc_header_desc *phonet_header = NULL;
+	const struct usb_host_interface *data_desc;
+	struct usb_interface *data_intf;
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct net_device *dev;
+	struct usbpn_dev *pnd;
+	u8 *data;
+	int len, err;
+
+	data = intf->altsetting->extra;
+	len = intf->altsetting->extralen;
+	while (len >= 3) {
+		u8 dlen = data[0];
+		if (dlen < 3)
+			return -EINVAL;
+
+		/* bDescriptorType */
+		if (data[1] == USB_DT_CS_INTERFACE) {
+			/* bDescriptorSubType */
+			switch (data[2]) {
+			case USB_CDC_UNION_TYPE:
+				if (union_header || dlen < 5)
+					break;
+				union_header =
+					(struct usb_cdc_union_desc *)data;
+				break;
+			case 0xAB:
+				if (phonet_header || dlen < 5)
+					break;
+				phonet_header =
+					(struct usb_cdc_header_desc *)data;
+				break;
+			}
+		}
+		data += dlen;
+		len -= dlen;
+	}
+
+	if (!union_header || !phonet_header)
+		return -EINVAL;
+
+	data_intf = usb_ifnum_to_if(usbdev, union_header->bSlaveInterface0);
+	if (data_intf == NULL)
+		return -ENODEV;
+	/* Data interface has one inactive and one active setting */
+	if (data_intf->num_altsetting != 2)
+		return -EINVAL;
+	if (data_intf->altsetting[0].desc.bNumEndpoints == 0
+	 && data_intf->altsetting[1].desc.bNumEndpoints == 2)
+		data_desc = data_intf->altsetting + 1;
+	else
+	if (data_intf->altsetting[0].desc.bNumEndpoints == 2
+	 && data_intf->altsetting[1].desc.bNumEndpoints == 0)
+		data_desc = data_intf->altsetting;
+	else
+		return -EINVAL;
+
+	dev = alloc_netdev(sizeof(*pnd) + sizeof(pnd->urbs[0]) * rxq_size,
+				ifname, usbpn_setup);
+	if (!dev)
+		return -ENOMEM;
+
+	pnd = netdev_priv(dev);
+	SET_NETDEV_DEV(dev, &intf->dev);
+	netif_stop_queue(dev);
+
+	pnd->dev = dev;
+	pnd->usb = usb_get_dev(usbdev);
+	pnd->intf = intf;
+	pnd->data_intf = data_intf;
+	spin_lock_init(&pnd->tx_lock);
+	spin_lock_init(&pnd->rx_lock);
+	/* Endpoints */
+	if (usb_pipein(data_desc->endpoint[0].desc.bEndpointAddress)) {
+		pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
+			data_desc->endpoint[0].desc.bEndpointAddress);
+		pnd->tx_pipe = usb_sndbulkpipe(usbdev,
+			data_desc->endpoint[1].desc.bEndpointAddress);
+	} else {
+		pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
+			data_desc->endpoint[1].desc.bEndpointAddress);
+		pnd->tx_pipe = usb_sndbulkpipe(usbdev,
+			data_desc->endpoint[0].desc.bEndpointAddress);
+	}
+	pnd->active_setting = data_desc - data_intf->altsetting;
+
+	err = usb_driver_claim_interface(&usbpn_driver, data_intf, pnd);
+	if (err)
+		goto out;
+
+	/* Force inactive mode until the network device is brought UP */
+	usb_set_interface(usbdev, union_header->bSlaveInterface0,
+				!pnd->active_setting);
+	usb_set_intfdata(intf, pnd);
+
+	err = register_netdev(dev);
+	if (err) {
+		usb_driver_release_interface(&usbpn_driver, data_intf);
+		goto out;
+	}
+
+	dev_dbg(&dev->dev, "USB CDC Phonet device found\n");
+	return 0;
+
+out:
+	usb_set_intfdata(intf, NULL);
+	free_netdev(dev);
+	return err;
+}
+
+static void usbpn_disconnect(struct usb_interface *intf)
+{
+	struct usbpn_dev *pnd = usb_get_intfdata(intf);
+	struct usb_device *usb = pnd->usb;
+
+	if (pnd->disconnected)
+		return;
+
+	pnd->disconnected = 1;
+	usb_driver_release_interface(&usbpn_driver,
+			(pnd->intf == intf) ? pnd->data_intf : pnd->intf);
+	unregister_netdev(pnd->dev);
+	usb_put_dev(usb);
+}
+
+static struct usb_driver usbpn_driver = {
+	.name =		"cdc_phonet",
+	.probe =	usbpn_probe,
+	.disconnect =	usbpn_disconnect,
+	.id_table =	usbpn_ids,
+};
+
+static int __init usbpn_init(void)
+{
+	return usb_register(&usbpn_driver);
+}
+
+static void __exit usbpn_exit(void)
+{
+	usb_deregister(&usbpn_driver);
+}
+
+module_init(usbpn_init);
+module_exit(usbpn_exit);
+
+MODULE_AUTHOR("Remi Denis-Courmont");
+MODULE_DESCRIPTION("USB CDC Phonet host interface");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index 80e01778dd3..45cebfb302c 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -311,7 +311,7 @@ static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 			 *	bmCRC = 0	: CRC = 0xDEADBEEF
 			 */
 			if (header & BIT(14))
-				crc2 = ~crc32_le(~0, skb2->data, len);
+				crc2 = ~crc32_le(~0, skb2->data, skb2->len);
 			else
 				crc2 = 0xdeadbeef;
 
@@ -319,7 +319,7 @@ static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 				return crc == crc2;
 
 			if (unlikely(crc != crc2)) {
-				dev->stats.rx_errors++;
+				dev->net->stats.rx_errors++;
 				dev_kfree_skb_any(skb2);
 			} else
 				usbnet_skb_return(dev, skb2);
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 7ae82446b93..1d3730d6690 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -513,11 +513,11 @@ static int dm9601_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	len = (skb->data[1] | (skb->data[2] << 8)) - 4;
 
 	if (unlikely(status & 0xbf)) {
-		if (status & 0x01) dev->stats.rx_fifo_errors++;
-		if (status & 0x02) dev->stats.rx_crc_errors++;
-		if (status & 0x04) dev->stats.rx_frame_errors++;
-		if (status & 0x20) dev->stats.rx_missed_errors++;
-		if (status & 0x90) dev->stats.rx_length_errors++;
+		if (status & 0x01) dev->net->stats.rx_fifo_errors++;
+		if (status & 0x02) dev->net->stats.rx_crc_errors++;
+		if (status & 0x04) dev->net->stats.rx_frame_errors++;
+		if (status & 0x20) dev->net->stats.rx_missed_errors++;
+		if (status & 0x90) dev->net->stats.rx_length_errors++;
 		return 0;
 	}
 
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index e0131478971..1f9ec29fce5 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -999,6 +999,9 @@ static const struct net_device_ops kaweth_netdev_ops = {
 	.ndo_tx_timeout =		kaweth_tx_timeout,
 	.ndo_set_multicast_list =	kaweth_set_rx_mode,
 	.ndo_get_stats =		kaweth_netdev_stats,
+	.ndo_change_mtu =		eth_change_mtu,
+	.ndo_set_mac_address =		eth_mac_addr,
+	.ndo_validate_addr =		eth_validate_addr,
 };
 
 static int kaweth_probe(
diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c
index 034e8a73ca6..aeb1ab03a9e 100644
--- a/drivers/net/usb/net1080.c
+++ b/drivers/net/usb/net1080.c
@@ -433,7 +433,7 @@ static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 		dbg("rx framesize %d range %d..%d mtu %d", skb->len,
 			net->hard_header_len, dev->hard_mtu, net->mtu);
 #endif
-		dev->stats.rx_frame_errors++;
+		dev->net->stats.rx_frame_errors++;
 		nc_ensure_sync(dev);
 		return 0;
 	}
@@ -442,12 +442,12 @@ static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	hdr_len = le16_to_cpup(&header->hdr_len);
 	packet_len = le16_to_cpup(&header->packet_len);
 	if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) {
-		dev->stats.rx_frame_errors++;
+		dev->net->stats.rx_frame_errors++;
 		dbg("packet too big, %d", packet_len);
 		nc_ensure_sync(dev);
 		return 0;
 	} else if (hdr_len < MIN_HEADER) {
-		dev->stats.rx_frame_errors++;
+		dev->net->stats.rx_frame_errors++;
 		dbg("header too short, %d", hdr_len);
 		nc_ensure_sync(dev);
 		return 0;
@@ -465,21 +465,21 @@ static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 
 	if ((packet_len & 0x01) == 0) {
 		if (skb->data [packet_len] != PAD_BYTE) {
-			dev->stats.rx_frame_errors++;
+			dev->net->stats.rx_frame_errors++;
 			dbg("bad pad");
 			return 0;
 		}
 		skb_trim(skb, skb->len - 1);
 	}
 	if (skb->len != packet_len) {
-		dev->stats.rx_frame_errors++;
+		dev->net->stats.rx_frame_errors++;
 		dbg("bad packet len %d (expected %d)",
 			skb->len, packet_len);
 		nc_ensure_sync(dev);
 		return 0;
 	}
 	if (header->packet_id != get_unaligned(&trailer->packet_id)) {
-		dev->stats.rx_fifo_errors++;
+		dev->net->stats.rx_fifo_errors++;
 		dbg("(2+ dropped) rx packet_id mismatch 0x%x 0x%x",
 			le16_to_cpu(header->packet_id),
 			le16_to_cpu(trailer->packet_id));
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 73acbd244aa..631d269ac98 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -1493,6 +1493,9 @@ static const struct net_device_ops pegasus_netdev_ops = {
 	.ndo_set_multicast_list =	pegasus_set_multicast,
 	.ndo_get_stats =		pegasus_netdev_stats,
 	.ndo_tx_timeout =		pegasus_tx_timeout,
+	.ndo_change_mtu =		eth_change_mtu,
+	.ndo_set_mac_address =		eth_mac_addr,
+	.ndo_validate_addr =		eth_validate_addr,
 };
 
 static struct usb_driver pegasus_driver = {
diff --git a/drivers/net/usb/pegasus.h b/drivers/net/usb/pegasus.h
index c7467823cd1..f968c834ff6 100644
--- a/drivers/net/usb/pegasus.h
+++ b/drivers/net/usb/pegasus.h
@@ -250,6 +250,8 @@ PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "IO DATA USB ETX-US2", VENDOR_IODATA, 0x092a,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
 		DEFAULT_GPIO_RESET)
 PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002,
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 1bf243ef950..2232232b798 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -487,7 +487,7 @@ int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 		if (unlikely(hdr->msg_type != RNDIS_MSG_PACKET
 				|| skb->len < msg_len
 				|| (data_offset + data_len + 8) > msg_len)) {
-			dev->stats.rx_frame_errors++;
+			dev->net->stats.rx_frame_errors++;
 			devdbg(dev, "bad rndis message %d/%d/%d/%d, len %d",
 				le32_to_cpu(hdr->msg_type),
 				msg_len, data_offset, data_len, skb->len);
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 89a91f8c22d..fe045896406 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1108,18 +1108,18 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 		if (unlikely(header & RX_STS_ES_)) {
 			if (netif_msg_rx_err(dev))
 				devdbg(dev, "Error header=0x%08x", header);
-			dev->stats.rx_errors++;
-			dev->stats.rx_dropped++;
+			dev->net->stats.rx_errors++;
+			dev->net->stats.rx_dropped++;
 
 			if (header & RX_STS_CRC_) {
-				dev->stats.rx_crc_errors++;
+				dev->net->stats.rx_crc_errors++;
 			} else {
 				if (header & (RX_STS_TL_ | RX_STS_RF_))
-					dev->stats.rx_frame_errors++;
+					dev->net->stats.rx_frame_errors++;
 
 				if ((header & RX_STS_LE_) &&
 					(!(header & RX_STS_FT_)))
-					dev->stats.rx_length_errors++;
+					dev->net->stats.rx_length_errors++;
 			}
 		} else {
 			/* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 22c0585a031..edfd9e10ceb 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -234,8 +234,8 @@ void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
 	int	status;
 
 	skb->protocol = eth_type_trans (skb, dev->net);
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += skb->len;
+	dev->net->stats.rx_packets++;
+	dev->net->stats.rx_bytes += skb->len;
 
 	if (netif_msg_rx_status (dev))
 		devdbg (dev, "< rx, len %zu, type 0x%x",
@@ -397,7 +397,7 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
 		if (netif_msg_rx_err (dev))
 			devdbg (dev, "drop");
 error:
-		dev->stats.rx_errors++;
+		dev->net->stats.rx_errors++;
 		skb_queue_tail (&dev->done, skb);
 	}
 }
@@ -420,8 +420,8 @@ static void rx_complete (struct urb *urb)
 	case 0:
 		if (skb->len < dev->net->hard_header_len) {
 			entry->state = rx_cleanup;
-			dev->stats.rx_errors++;
-			dev->stats.rx_length_errors++;
+			dev->net->stats.rx_errors++;
+			dev->net->stats.rx_length_errors++;
 			if (netif_msg_rx_err (dev))
 				devdbg (dev, "rx length %d", skb->len);
 		}
@@ -433,7 +433,7 @@ static void rx_complete (struct urb *urb)
 	 * storm, recovering as needed.
 	 */
 	case -EPIPE:
-		dev->stats.rx_errors++;
+		dev->net->stats.rx_errors++;
 		usbnet_defer_kevent (dev, EVENT_RX_HALT);
 		// FALLTHROUGH
 
@@ -451,7 +451,7 @@ static void rx_complete (struct urb *urb)
 	case -EPROTO:
 	case -ETIME:
 	case -EILSEQ:
-		dev->stats.rx_errors++;
+		dev->net->stats.rx_errors++;
 		if (!timer_pending (&dev->delay)) {
 			mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
 			if (netif_msg_link (dev))
@@ -465,12 +465,12 @@ block:
 
 	/* data overrun ... flush fifo? */
 	case -EOVERFLOW:
-		dev->stats.rx_over_errors++;
+		dev->net->stats.rx_over_errors++;
 		// FALLTHROUGH
 
 	default:
 		entry->state = rx_cleanup;
-		dev->stats.rx_errors++;
+		dev->net->stats.rx_errors++;
 		if (netif_msg_rx_err (dev))
 			devdbg (dev, "rx status %d", urb_status);
 		break;
@@ -583,8 +583,8 @@ int usbnet_stop (struct net_device *net)
 
 	if (netif_msg_ifdown (dev))
 		devinfo (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld",
-			dev->stats.rx_packets, dev->stats.tx_packets,
-			dev->stats.rx_errors, dev->stats.tx_errors
+			net->stats.rx_packets, net->stats.tx_packets,
+			net->stats.rx_errors, net->stats.tx_errors
 			);
 
 	// ensure there are no more active urbs
@@ -891,10 +891,10 @@ static void tx_complete (struct urb *urb)
 	struct usbnet		*dev = entry->dev;
 
 	if (urb->status == 0) {
-		dev->stats.tx_packets++;
-		dev->stats.tx_bytes += entry->length;
+		dev->net->stats.tx_packets++;
+		dev->net->stats.tx_bytes += entry->length;
 	} else {
-		dev->stats.tx_errors++;
+		dev->net->stats.tx_errors++;
 
 		switch (urb->status) {
 		case -EPIPE:
@@ -1020,7 +1020,7 @@ int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net)
 			devdbg (dev, "drop, code %d", retval);
 drop:
 		retval = NET_XMIT_SUCCESS;
-		dev->stats.tx_dropped++;
+		dev->net->stats.tx_dropped++;
 		if (skb)
 			dev_kfree_skb_any (skb);
 		usb_free_urb (urb);
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 87197dd9c78..1097c72e44d 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -208,11 +208,14 @@ rx_drop:
 
 static struct net_device_stats *veth_get_stats(struct net_device *dev)
 {
-	struct veth_priv *priv = netdev_priv(dev);
-	struct net_device_stats *dev_stats = &dev->stats;
-	unsigned int cpu;
+	struct veth_priv *priv;
+	struct net_device_stats *dev_stats;
+	int cpu;
 	struct veth_net_stats *stats;
 
+	priv = netdev_priv(dev);
+	dev_stats = &dev->stats;
+
 	dev_stats->rx_packets = 0;
 	dev_stats->tx_packets = 0;
 	dev_stats->rx_bytes = 0;
@@ -220,17 +223,16 @@ static struct net_device_stats *veth_get_stats(struct net_device *dev)
 	dev_stats->tx_dropped = 0;
 	dev_stats->rx_dropped = 0;
 
-	if (priv->stats)
-		for_each_online_cpu(cpu) {
-			stats = per_cpu_ptr(priv->stats, cpu);
+	for_each_online_cpu(cpu) {
+		stats = per_cpu_ptr(priv->stats, cpu);
 
-			dev_stats->rx_packets += stats->rx_packets;
-			dev_stats->tx_packets += stats->tx_packets;
-			dev_stats->rx_bytes += stats->rx_bytes;
-			dev_stats->tx_bytes += stats->tx_bytes;
-			dev_stats->tx_dropped += stats->tx_dropped;
-			dev_stats->rx_dropped += stats->rx_dropped;
-		}
+		dev_stats->rx_packets += stats->rx_packets;
+		dev_stats->tx_packets += stats->tx_packets;
+		dev_stats->rx_bytes += stats->rx_bytes;
+		dev_stats->tx_bytes += stats->tx_bytes;
+		dev_stats->tx_dropped += stats->tx_dropped;
+		dev_stats->rx_dropped += stats->rx_dropped;
+	}
 
 	return dev_stats;
 }
@@ -257,8 +259,6 @@ static int veth_close(struct net_device *dev)
 	netif_carrier_off(dev);
 	netif_carrier_off(priv->peer);
 
-	free_percpu(priv->stats);
-	priv->stats = NULL;
 	return 0;
 }
 
@@ -289,6 +289,15 @@ static int veth_dev_init(struct net_device *dev)
 	return 0;
 }
 
+static void veth_dev_free(struct net_device *dev)
+{
+	struct veth_priv *priv;
+
+	priv = netdev_priv(dev);
+	free_percpu(priv->stats);
+	free_netdev(dev);
+}
+
 static const struct net_device_ops veth_netdev_ops = {
 	.ndo_init            = veth_dev_init,
 	.ndo_open            = veth_open,
@@ -306,7 +315,7 @@ static void veth_setup(struct net_device *dev)
 	dev->netdev_ops = &veth_netdev_ops;
 	dev->ethtool_ops = &veth_ethtool_ops;
 	dev->features |= NETIF_F_LLTX;
-	dev->destructor = free_netdev;
+	dev->destructor = veth_dev_free;
 }
 
 /*
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index d3489a3c4c0..934f7671650 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -621,6 +621,7 @@ static const struct net_device_ops rhine_netdev_ops = {
 	.ndo_start_xmit		 = rhine_start_tx,
 	.ndo_get_stats		 = rhine_get_stats,
 	.ndo_set_multicast_list	 = rhine_set_rx_mode,
+	.ndo_change_mtu		 = eth_change_mtu,
 	.ndo_validate_addr	 = eth_validate_addr,
 	.ndo_set_mac_address 	 = eth_mac_addr,
 	.ndo_do_ioctl		 = netdev_ioctl,
@@ -1217,6 +1218,7 @@ static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev)
 	struct rhine_private *rp = netdev_priv(dev);
 	void __iomem *ioaddr = rp->base;
 	unsigned entry;
+	unsigned long flags;
 
 	/* Caution: the write order is important here, set the field
 	   with the "ownership" bits last. */
@@ -1260,7 +1262,7 @@ static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev)
 		cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
 
 	/* lock eth irq */
-	spin_lock_irq(&rp->lock);
+	spin_lock_irqsave(&rp->lock, flags);
 	wmb();
 	rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
 	wmb();
@@ -1279,7 +1281,7 @@ static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev)
 
 	dev->trans_start = jiffies;
 
-	spin_unlock_irq(&rp->lock);
+	spin_unlock_irqrestore(&rp->lock, flags);
 
 	if (debug > 4) {
 		printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 3ba35956327..cee08a1e497 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1778,7 +1778,7 @@ static void velocity_error(struct velocity_info *vptr, int status)
 			 *	 mode
 			 */
 			if (vptr->rev_id < REV_ID_VT3216_A0) {
-				if (vptr->mii_status | VELOCITY_DUPLEX_FULL)
+				if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
 					BYTE_REG_BITS_ON(TCR_TB2BDIS, &regs->TCR);
 				else
 					BYTE_REG_BITS_OFF(TCR_TB2BDIS, &regs->TCR);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 2a6e81d5b57..bbedf03a212 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -70,6 +70,9 @@ struct virtnet_info
 	struct sk_buff_head recv;
 	struct sk_buff_head send;
 
+	/* Work struct for refilling if we run low on memory. */
+	struct delayed_work refill;
+
 	/* Chain pages by the private ptr. */
 	struct page *pages;
 };
@@ -273,19 +276,22 @@ drop:
 	dev_kfree_skb(skb);
 }
 
-static void try_fill_recv_maxbufs(struct virtnet_info *vi)
+static bool try_fill_recv_maxbufs(struct virtnet_info *vi, gfp_t gfp)
 {
 	struct sk_buff *skb;
 	struct scatterlist sg[2+MAX_SKB_FRAGS];
 	int num, err, i;
+	bool oom = false;
 
 	sg_init_table(sg, 2+MAX_SKB_FRAGS);
 	for (;;) {
 		struct virtio_net_hdr *hdr;
 
 		skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN + NET_IP_ALIGN);
-		if (unlikely(!skb))
+		if (unlikely(!skb)) {
+			oom = true;
 			break;
+		}
 
 		skb_reserve(skb, NET_IP_ALIGN);
 		skb_put(skb, MAX_PACKET_LEN);
@@ -296,7 +302,7 @@ static void try_fill_recv_maxbufs(struct virtnet_info *vi)
 		if (vi->big_packets) {
 			for (i = 0; i < MAX_SKB_FRAGS; i++) {
 				skb_frag_t *f = &skb_shinfo(skb)->frags[i];
-				f->page = get_a_page(vi, GFP_ATOMIC);
+				f->page = get_a_page(vi, gfp);
 				if (!f->page)
 					break;
 
@@ -325,31 +331,35 @@ static void try_fill_recv_maxbufs(struct virtnet_info *vi)
 	if (unlikely(vi->num > vi->max))
 		vi->max = vi->num;
 	vi->rvq->vq_ops->kick(vi->rvq);
+	return !oom;
 }
 
-static void try_fill_recv(struct virtnet_info *vi)
+/* Returns false if we couldn't fill entirely (OOM). */
+static bool try_fill_recv(struct virtnet_info *vi, gfp_t gfp)
 {
 	struct sk_buff *skb;
 	struct scatterlist sg[1];
 	int err;
+	bool oom = false;
 
-	if (!vi->mergeable_rx_bufs) {
-		try_fill_recv_maxbufs(vi);
-		return;
-	}
+	if (!vi->mergeable_rx_bufs)
+		return try_fill_recv_maxbufs(vi, gfp);
 
 	for (;;) {
 		skb_frag_t *f;
 
 		skb = netdev_alloc_skb(vi->dev, GOOD_COPY_LEN + NET_IP_ALIGN);
-		if (unlikely(!skb))
+		if (unlikely(!skb)) {
+			oom = true;
 			break;
+		}
 
 		skb_reserve(skb, NET_IP_ALIGN);
 
 		f = &skb_shinfo(skb)->frags[0];
-		f->page = get_a_page(vi, GFP_ATOMIC);
+		f->page = get_a_page(vi, gfp);
 		if (!f->page) {
+			oom = true;
 			kfree_skb(skb);
 			break;
 		}
@@ -373,6 +383,7 @@ static void try_fill_recv(struct virtnet_info *vi)
 	if (unlikely(vi->num > vi->max))
 		vi->max = vi->num;
 	vi->rvq->vq_ops->kick(vi->rvq);
+	return !oom;
 }
 
 static void skb_recv_done(struct virtqueue *rvq)
@@ -385,6 +396,23 @@ static void skb_recv_done(struct virtqueue *rvq)
 	}
 }
 
+static void refill_work(struct work_struct *work)
+{
+	struct virtnet_info *vi;
+	bool still_empty;
+
+	vi = container_of(work, struct virtnet_info, refill.work);
+	napi_disable(&vi->napi);
+	try_fill_recv(vi, GFP_KERNEL);
+	still_empty = (vi->num == 0);
+	napi_enable(&vi->napi);
+
+	/* In theory, this can happen: if we don't get any buffers in
+	 * we will *never* try to fill again. */
+	if (still_empty)
+		schedule_delayed_work(&vi->refill, HZ/2);
+}
+
 static int virtnet_poll(struct napi_struct *napi, int budget)
 {
 	struct virtnet_info *vi = container_of(napi, struct virtnet_info, napi);
@@ -400,10 +428,10 @@ again:
 		received++;
 	}
 
-	/* FIXME: If we oom and completely run out of inbufs, we need
-	 * to start a timer trying to fill more. */
-	if (vi->num < vi->max / 2)
-		try_fill_recv(vi);
+	if (vi->num < vi->max / 2) {
+		if (!try_fill_recv(vi, GFP_ATOMIC))
+			schedule_delayed_work(&vi->refill, 0);
+	}
 
 	/* Out of packets? */
 	if (received < budget) {
@@ -893,6 +921,7 @@ static int virtnet_probe(struct virtio_device *vdev)
 	vi->vdev = vdev;
 	vdev->priv = vi;
 	vi->pages = NULL;
+	INIT_DELAYED_WORK(&vi->refill, refill_work);
 
 	/* If they give us a callback when all buffers are done, we don't need
 	 * the timer. */
@@ -941,7 +970,7 @@ static int virtnet_probe(struct virtio_device *vdev)
 	}
 
 	/* Last of all, set up some receive buffers. */
-	try_fill_recv(vi);
+	try_fill_recv(vi, GFP_KERNEL);
 
 	/* If we didn't even get one input buffer, we're useless. */
 	if (vi->num == 0) {
@@ -958,6 +987,7 @@ static int virtnet_probe(struct virtio_device *vdev)
 
 unregister:
 	unregister_netdev(dev);
+	cancel_delayed_work_sync(&vi->refill);
 free_vqs:
 	vdev->config->del_vqs(vdev);
 free:
@@ -986,6 +1016,7 @@ static void virtnet_remove(struct virtio_device *vdev)
 	BUG_ON(vi->num != 0);
 
 	unregister_netdev(vi->dev);
+	cancel_delayed_work_sync(&vi->refill);
 
 	vdev->config->del_vqs(vi->vdev);
 
diff --git a/drivers/net/wan/hd64570.c b/drivers/net/wan/hd64570.c
index 223238de475..1ea1ef6c3b9 100644
--- a/drivers/net/wan/hd64570.c
+++ b/drivers/net/wan/hd64570.c
@@ -584,8 +584,9 @@ static void sca_dump_rings(struct net_device *dev)
 	       sca_in(DSR_RX(phy_node(port)), card) & DSR_DE ? "" : "in");
 	for (cnt = 0; cnt < port_to_card(port)->rx_ring_buffers; cnt++)
 		printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
+	printk(KERN_CONT "\n");
 
-	printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
+	printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
 	       "last=%u %sactive",
 	       sca_inw(get_dmac_tx(port) + CDAL, card),
 	       sca_inw(get_dmac_tx(port) + EDAL, card),
diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c
index 497b003d723..f099c34a3ae 100644
--- a/drivers/net/wan/hd64572.c
+++ b/drivers/net/wan/hd64572.c
@@ -529,8 +529,9 @@ static void sca_dump_rings(struct net_device *dev)
 	       sca_in(DSR_RX(port->chan), card) & DSR_DE ? "" : "in");
 	for (cnt = 0; cnt < port->card->rx_ring_buffers; cnt++)
 		printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
+	printk(KERN_CONT "\n");
 
-	printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
+	printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
 	       "last=%u %sactive",
 	       sca_inl(get_dmac_tx(port) + CDAL, card),
 	       sca_inl(get_dmac_tx(port) + EDAL, card),
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index 3fb9dbc88a1..d14e95a08d6 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -326,11 +326,9 @@ sbni_pci_probe( struct net_device  *dev )
 		}
 
 		if (pci_irq_line <= 0 || pci_irq_line >= nr_irqs)
-			printk( KERN_WARNING "  WARNING: The PCI BIOS assigned "
-				"this PCI card to IRQ %d, which is unlikely "
-				"to work!.\n"
-				KERN_WARNING " You should use the PCI BIOS "
-				"setup to assign a valid IRQ line.\n",
+			printk( KERN_WARNING
+	"  WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n"
+	" You should use the PCI BIOS setup to assign a valid IRQ line.\n",
 				pci_irq_line );
 
 		/* avoiding re-enable dual adapters */
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index c70604f0329..8ce5e4cee16 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -5918,20 +5918,19 @@ static int airo_set_essid(struct net_device *dev,
 	readSsidRid(local, &SSID_rid);
 
 	/* Check if we asked for `any' */
-	if(dwrq->flags == 0) {
+	if (dwrq->flags == 0) {
 		/* Just send an empty SSID list */
 		memset(&SSID_rid, 0, sizeof(SSID_rid));
 	} else {
-		int	index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+		unsigned index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
 
 		/* Check the size of the string */
-		if(dwrq->length > IW_ESSID_MAX_SIZE) {
+		if (dwrq->length > IW_ESSID_MAX_SIZE)
 			return -E2BIG ;
-		}
+
 		/* Check if index is valid */
-		if((index < 0) || (index >= 4)) {
+		if (index >= ARRAY_SIZE(SSID_rid.ssids))
 			return -EINVAL;
-		}
 
 		/* Set the SSID */
 		memset(SSID_rid.ssids[index].ssid, 0,
@@ -6819,7 +6818,7 @@ static int airo_set_txpow(struct net_device *dev,
 		return -EINVAL;
 	}
 	clear_bit (FLAG_RADIO_OFF, &local->flags);
-	for (i = 0; cap_rid.txPowerLevels[i] && (i < 8); i++)
+	for (i = 0; i < 8 && cap_rid.txPowerLevels[i]; i++)
 		if (v == cap_rid.txPowerLevels[i]) {
 			readConfigRid(local, 1);
 			local->config.txPower = v;
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index d26e7b48531..eb0337c4954 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -1,5 +1,6 @@
 config ATH_COMMON
 	tristate "Atheros Wireless Cards"
+	depends on WLAN_80211
 	depends on ATH5K || ATH9K || AR9170_USB
 
 source "drivers/net/wireless/ath/ath5k/Kconfig"
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 9d38cf60a0d..88c3d857386 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -1967,13 +1967,14 @@ static int ar9170_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	int ret;
 
 	mutex_lock(&ar->mutex);
-	if ((param) && !(queue > __AR9170_NUM_TXQ)) {
+	if (queue < __AR9170_NUM_TXQ) {
 		memcpy(&ar->edcf[ar9170_qos_hwmap[queue]],
 		       param, sizeof(*param));
 
 		ret = ar9170_set_qos(ar);
-	} else
+	} else {
 		ret = -EINVAL;
+	}
 
 	mutex_unlock(&ar->mutex);
 	return ret;
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index 754b1f8d8da..007eb85fc67 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -598,11 +598,15 @@ static int ar9170_usb_request_firmware(struct ar9170_usb *aru)
 
 	err = request_firmware(&aru->init_values, "ar9170-1.fw",
 			       &aru->udev->dev);
+	if (err) {
+		dev_err(&aru->udev->dev, "file with init values not found.\n");
+		return err;
+	}
 
 	err = request_firmware(&aru->firmware, "ar9170-2.fw", &aru->udev->dev);
 	if (err) {
 		release_firmware(aru->init_values);
-		dev_err(&aru->udev->dev, "file with init values not found.\n");
+		dev_err(&aru->udev->dev, "firmware file not found.\n");
 		return err;
 	}
 
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index ea045151f95..029c1bc7468 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2970,6 +2970,9 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	if (modparam_nohwcrypt)
 		return -EOPNOTSUPP;
 
+	if (sc->opmode == NL80211_IFTYPE_AP)
+		return -EOPNOTSUPP;
+
 	switch (key->alg) {
 	case ALG_WEP:
 	case ALG_TKIP:
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 1aeafb511dd..aad259b4c19 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -478,6 +478,18 @@ void ath9k_ani_reset(struct ath_hw *ah)
 			"Reset ANI state opmode %u\n", ah->opmode);
 		ah->stats.ast_ani_reset++;
 
+		if (ah->opmode == NL80211_IFTYPE_AP) {
+			/*
+			 * ath9k_hw_ani_control() will only process items set on
+			 * ah->ani_function
+			 */
+			if (IS_CHAN_2GHZ(chan))
+				ah->ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL |
+						    ATH9K_ANI_FIRSTEP_LEVEL);
+			else
+				ah->ani_function = 0;
+		}
+
 		ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL, 0);
 		ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL, 0);
 		ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL, 0);
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c
index a2fda702b62..ce0e86c36a8 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
@@ -460,7 +460,7 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
 		integer = swab32(eep->modalHeader.antCtrlCommon);
 		eep->modalHeader.antCtrlCommon = integer;
 
-		for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+		for (i = 0; i < AR5416_EEP4K_MAX_CHAINS; i++) {
 			integer = swab32(eep->modalHeader.antCtrlChain[i]);
 			eep->modalHeader.antCtrlChain[i] = integer;
 		}
@@ -914,7 +914,7 @@ static void ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 			ctlMode, numCtlModes, isHt40CtlMode,
 			(pCtlMode[ctlMode] & EXT_ADDITIVE));
 
-		for (i = 0; (i < AR5416_NUM_CTLS) &&
+		for (i = 0; (i < AR5416_EEP4K_NUM_CTLS) &&
 				pEepData->ctlIndex[i]; i++) {
 			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 				"  LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index b61a071788a..4ccf48e396d 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -355,7 +355,14 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 		}
 
 		if (bf_next == NULL) {
-			INIT_LIST_HEAD(&bf_head);
+			/*
+			 * Make sure the last desc is reclaimed if it
+			 * not a holding desc.
+			 */
+			if (!bf_last->bf_stale)
+				list_move_tail(&bf->list, &bf_head);
+			else
+				INIT_LIST_HEAD(&bf_head);
 		} else {
 			ASSERT(!list_empty(bf_q));
 			list_move_tail(&bf->list, &bf_head);
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index eef370bd121..bf3d25ba7be 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -474,6 +474,21 @@ ath_regd_init_wiphy(struct ath_regulatory *reg,
 	return 0;
 }
 
+/*
+ * Some users have reported their EEPROM programmed with
+ * 0x8000 set, this is not a supported regulatory domain
+ * but since we have more than one user with it we need
+ * a solution for them. We default to 0x64, which is the
+ * default Atheros world regulatory domain.
+ */
+static void ath_regd_sanitize(struct ath_regulatory *reg)
+{
+	if (reg->current_rd != COUNTRY_ERD_FLAG)
+		return;
+	printk(KERN_DEBUG "ath: EEPROM regdomain sanitized\n");
+	reg->current_rd = 0x64;
+}
+
 int
 ath_regd_init(struct ath_regulatory *reg,
 	      struct wiphy *wiphy,
@@ -486,6 +501,8 @@ ath_regd_init(struct ath_regulatory *reg,
 	if (!reg)
 		return -EINVAL;
 
+	ath_regd_sanitize(reg);
+
 	printk(KERN_DEBUG "ath: EEPROM regdomain: 0x%0x\n", reg->current_rd);
 
 	if (!ath_regd_is_eeprom_valid(reg)) {
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index f580c2812d9..40448067e4c 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -648,6 +648,7 @@ struct b43_wl {
 	u8 nr_devs;
 
 	bool radiotap_enabled;
+	bool radio_enabled;
 
 	/* The beacon we are currently using (AP or IBSS mode).
 	 * This beacon stuff is protected by the irq_lock. */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 6456afebdba..e71c8d9cd70 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3497,8 +3497,8 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	if (phy->ops->set_rx_antenna)
 		phy->ops->set_rx_antenna(dev, antenna);
 
-	if (!!conf->radio_enabled != phy->radio_on) {
-		if (conf->radio_enabled) {
+	if (wl->radio_enabled != phy->radio_on) {
+		if (wl->radio_enabled) {
 			b43_software_rfkill(dev, false);
 			b43info(dev->wl, "Radio turned on by software\n");
 			if (!dev->radio_hw_enable) {
@@ -4339,6 +4339,7 @@ static int b43_op_start(struct ieee80211_hw *hw)
 	wl->beacon0_uploaded = 0;
 	wl->beacon1_uploaded = 0;
 	wl->beacon_templates_virgin = 1;
+	wl->radio_enabled = 1;
 
 	mutex_lock(&wl->mutex);
 
@@ -4378,6 +4379,7 @@ static void b43_op_stop(struct ieee80211_hw *hw)
 	if (b43_status(dev) >= B43_STAT_STARTED)
 		b43_wireless_core_stop(dev);
 	b43_wireless_core_exit(dev);
+	wl->radio_enabled = 0;
 	mutex_unlock(&wl->mutex);
 
 	cancel_work_sync(&(wl->txpower_adjust_work));
@@ -4560,6 +4562,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
 		B43_WARN_ON(1);
 
 	dev->phy.gmode = have_2ghz_phy;
+	dev->phy.radio_on = 1;
 	tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
 	b43_wireless_core_reset(dev, tmp);
 
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 3cfc30307a2..6c3a74964ab 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -35,6 +35,7 @@
 
 static /*const */ struct pcmcia_device_id b43_pcmcia_tbl[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x448),
+	PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x476),
 	PCMCIA_DEVICE_NULL,
 };
 
diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
index 77fda148ac4..038baa8869e 100644
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/b43legacy/b43legacy.h
@@ -607,6 +607,7 @@ struct b43legacy_wl {
 	u8 nr_devs;
 
 	bool radiotap_enabled;
+	bool radio_enabled;
 
 	/* The beacon we are currently using (AP or IBSS mode).
 	 * This beacon stuff is protected by the irq_lock. */
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index e5136fb65dd..c4973c1942b 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2689,8 +2689,8 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
 	/* Antennas for RX and management frame TX. */
 	b43legacy_mgmtframe_txantenna(dev, antenna_tx);
 
-	if (!!conf->radio_enabled != phy->radio_on) {
-		if (conf->radio_enabled) {
+	if (wl->radio_enabled != phy->radio_on) {
+		if (wl->radio_enabled) {
 			b43legacy_radio_turn_on(dev);
 			b43legacyinfo(dev->wl, "Radio turned on by software\n");
 			if (!dev->radio_hw_enable)
@@ -3441,6 +3441,7 @@ static int b43legacy_op_start(struct ieee80211_hw *hw)
 	wl->beacon0_uploaded = 0;
 	wl->beacon1_uploaded = 0;
 	wl->beacon_templates_virgin = 1;
+	wl->radio_enabled = 1;
 
 	mutex_lock(&wl->mutex);
 
@@ -3479,6 +3480,7 @@ static void b43legacy_op_stop(struct ieee80211_hw *hw)
 	if (b43legacy_status(dev) >= B43legacy_STAT_STARTED)
 		b43legacy_wireless_core_stop(dev);
 	b43legacy_wireless_core_exit(dev);
+	wl->radio_enabled = 0;
 	mutex_unlock(&wl->mutex);
 }
 
@@ -3620,6 +3622,7 @@ static int b43legacy_wireless_core_attach(struct b43legacy_wldev *dev)
 		have_bphy = 1;
 
 	dev->phy.gmode = (have_gphy || have_bphy);
+	dev->phy.radio_on = 1;
 	tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0;
 	b43legacy_wireless_core_reset(dev, tmp);
 
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 44c29b3f672..f593fbbb4e5 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -2874,45 +2874,27 @@ static int ipw_fw_dma_add_command_block(struct ipw_priv *priv,
 	return 0;
 }
 
-static int ipw_fw_dma_add_buffer(struct ipw_priv *priv,
-				 u32 src_phys, u32 dest_address, u32 length)
+static int ipw_fw_dma_add_buffer(struct ipw_priv *priv, dma_addr_t *src_address,
+				 int nr, u32 dest_address, u32 len)
 {
-	u32 bytes_left = length;
-	u32 src_offset = 0;
-	u32 dest_offset = 0;
-	int status = 0;
+	int ret, i;
+	u32 size;
+
 	IPW_DEBUG_FW(">> \n");
-	IPW_DEBUG_FW_INFO("src_phys=0x%x dest_address=0x%x length=0x%x\n",
-			  src_phys, dest_address, length);
-	while (bytes_left > CB_MAX_LENGTH) {
-		status = ipw_fw_dma_add_command_block(priv,
-						      src_phys + src_offset,
-						      dest_address +
-						      dest_offset,
-						      CB_MAX_LENGTH, 0, 0);
-		if (status) {
+	IPW_DEBUG_FW_INFO("nr=%d dest_address=0x%x len=0x%x\n",
+			  nr, dest_address, len);
+
+	for (i = 0; i < nr; i++) {
+		size = min_t(u32, len - i * CB_MAX_LENGTH, CB_MAX_LENGTH);
+		ret = ipw_fw_dma_add_command_block(priv, src_address[i],
+						   dest_address +
+						   i * CB_MAX_LENGTH, size,
+						   0, 0);
+		if (ret) {
 			IPW_DEBUG_FW_INFO(": Failed\n");
 			return -1;
 		} else
 			IPW_DEBUG_FW_INFO(": Added new cb\n");
-
-		src_offset += CB_MAX_LENGTH;
-		dest_offset += CB_MAX_LENGTH;
-		bytes_left -= CB_MAX_LENGTH;
-	}
-
-	/* add the buffer tail */
-	if (bytes_left > 0) {
-		status =
-		    ipw_fw_dma_add_command_block(priv, src_phys + src_offset,
-						 dest_address + dest_offset,
-						 bytes_left, 0, 0);
-		if (status) {
-			IPW_DEBUG_FW_INFO(": Failed on the buffer tail\n");
-			return -1;
-		} else
-			IPW_DEBUG_FW_INFO
-			    (": Adding new cb - the buffer tail\n");
 	}
 
 	IPW_DEBUG_FW("<< \n");
@@ -3160,59 +3142,91 @@ static int ipw_load_ucode(struct ipw_priv *priv, u8 * data, size_t len)
 
 static int ipw_load_firmware(struct ipw_priv *priv, u8 * data, size_t len)
 {
-	int rc = -1;
+	int ret = -1;
 	int offset = 0;
 	struct fw_chunk *chunk;
-	dma_addr_t shared_phys;
-	u8 *shared_virt;
+	int total_nr = 0;
+	int i;
+	struct pci_pool *pool;
+	u32 *virts[CB_NUMBER_OF_ELEMENTS_SMALL];
+	dma_addr_t phys[CB_NUMBER_OF_ELEMENTS_SMALL];
 
 	IPW_DEBUG_TRACE("<< : \n");
-	shared_virt = pci_alloc_consistent(priv->pci_dev, len, &shared_phys);
 
-	if (!shared_virt)
+	pool = pci_pool_create("ipw2200", priv->pci_dev, CB_MAX_LENGTH, 0, 0);
+	if (!pool) {
+		IPW_ERROR("pci_pool_create failed\n");
 		return -ENOMEM;
-
-	memmove(shared_virt, data, len);
+	}
 
 	/* Start the Dma */
-	rc = ipw_fw_dma_enable(priv);
+	ret = ipw_fw_dma_enable(priv);
 
 	/* the DMA is already ready this would be a bug. */
 	BUG_ON(priv->sram_desc.last_cb_index > 0);
 
 	do {
+		u32 chunk_len;
+		u8 *start;
+		int size;
+		int nr = 0;
+
 		chunk = (struct fw_chunk *)(data + offset);
 		offset += sizeof(struct fw_chunk);
+		chunk_len = le32_to_cpu(chunk->length);
+		start = data + offset;
+
+		nr = (chunk_len + CB_MAX_LENGTH - 1) / CB_MAX_LENGTH;
+		for (i = 0; i < nr; i++) {
+			virts[total_nr] = pci_pool_alloc(pool, GFP_KERNEL,
+							 &phys[total_nr]);
+			if (!virts[total_nr]) {
+				ret = -ENOMEM;
+				goto out;
+			}
+			size = min_t(u32, chunk_len - i * CB_MAX_LENGTH,
+				     CB_MAX_LENGTH);
+			memcpy(virts[total_nr], start, size);
+			start += size;
+			total_nr++;
+			/* We don't support fw chunk larger than 64*8K */
+			BUG_ON(total_nr > CB_NUMBER_OF_ELEMENTS_SMALL);
+		}
+
 		/* build DMA packet and queue up for sending */
 		/* dma to chunk->address, the chunk->length bytes from data +
 		 * offeset*/
 		/* Dma loading */
-		rc = ipw_fw_dma_add_buffer(priv, shared_phys + offset,
-					   le32_to_cpu(chunk->address),
-					   le32_to_cpu(chunk->length));
-		if (rc) {
+		ret = ipw_fw_dma_add_buffer(priv, &phys[total_nr - nr],
+					    nr, le32_to_cpu(chunk->address),
+					    chunk_len);
+		if (ret) {
 			IPW_DEBUG_INFO("dmaAddBuffer Failed\n");
 			goto out;
 		}
 
-		offset += le32_to_cpu(chunk->length);
+		offset += chunk_len;
 	} while (offset < len);
 
 	/* Run the DMA and wait for the answer */
-	rc = ipw_fw_dma_kick(priv);
-	if (rc) {
+	ret = ipw_fw_dma_kick(priv);
+	if (ret) {
 		IPW_ERROR("dmaKick Failed\n");
 		goto out;
 	}
 
-	rc = ipw_fw_dma_wait(priv);
-	if (rc) {
+	ret = ipw_fw_dma_wait(priv);
+	if (ret) {
 		IPW_ERROR("dmaWaitSync Failed\n");
 		goto out;
 	}
-      out:
-	pci_free_consistent(priv->pci_dev, len, shared_virt, shared_phys);
-	return rc;
+ out:
+	for (i = 0; i < total_nr; i++)
+		pci_pool_free(pool, virts[i], phys[i]);
+
+	pci_pool_destroy(pool);
+
+	return ret;
 }
 
 /* stop nic */
@@ -6226,7 +6240,7 @@ static void ipw_add_scan_channels(struct ipw_priv *priv,
 			};
 
 			u8 channel;
-			while (channel_index < IPW_SCAN_CHANNELS) {
+			while (channel_index < IPW_SCAN_CHANNELS - 1) {
 				channel =
 				    priv->speed_scan[priv->speed_scan_pos];
 				if (channel == 0) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index fbb3a573463..2de6471d4be 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -112,7 +112,7 @@ enum iwl3945_antenna {
 #define IWL_TX_FIFO_NONE	7
 
 /* Minimum number of queues. MAX_NUM is defined in hw specific files */
-#define IWL_MIN_NUM_QUEUES	4
+#define IWL39_MIN_NUM_QUEUES	4
 
 #define IEEE80211_DATA_LEN              2304
 #define IEEE80211_4ADDR_LEN             30
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 6d1519e1f01..355f50ea7fe 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2675,12 +2675,10 @@ static ssize_t show_power_level(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
-	int mode = priv->power_data.user_power_setting;
 	int level = priv->power_data.power_mode;
 	char *p = buf;
 
-	p += sprintf(p, "INDEX:%d\t", level);
-	p += sprintf(p, "USER:%d\n", mode);
+	p += sprintf(p, "%d\n", level);
 	return p - buf + 1;
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 6ab07165ea2..18b135f510e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1332,6 +1332,9 @@ int iwl_setup_mac(struct iwl_priv *priv)
 
 	hw->wiphy->custom_regulatory = true;
 
+	/* Firmware does not support this */
+	hw->wiphy->disable_beacon_hints = true;
+
 	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
 	/* we create the 802.11 header and a zero-length SSID element */
 	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 11e08c06891..ca00cc8ad4c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -308,18 +308,18 @@ static ssize_t iwl_dbgfs_nvm_read(struct file *file,
 		return -ENODATA;
 	}
 
+	ptr = priv->eeprom;
+	if (!ptr) {
+		IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
+		return -ENOMEM;
+	}
+
 	/* 4 characters for byte 0xYY */
 	buf = kzalloc(buf_size, GFP_KERNEL);
 	if (!buf) {
 		IWL_ERR(priv, "Can not allocate Buffer\n");
 		return -ENOMEM;
 	}
-
-	ptr = priv->eeprom;
-	if (!ptr) {
-		IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
-		return -ENOMEM;
-	}
 	pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s\n",
 			(priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
 			? "OTP" : "EEPROM");
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index e2d620f0b6e..650e20af20f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -258,8 +258,10 @@ struct iwl_channel_info {
 #define IWL_TX_FIFO_HCCA_2	6
 #define IWL_TX_FIFO_NONE	7
 
-/* Minimum number of queues. MAX_NUM is defined in hw specific files */
-#define IWL_MIN_NUM_QUEUES	4
+/* Minimum number of queues. MAX_NUM is defined in hw specific files.
+ * Set the minimum to accommodate the 4 standard TX queues, 1 command
+ * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
+#define IWL_MIN_NUM_QUEUES	10
 
 /* Power management (not Tx power) structures */
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 2addf735b19..ffd5c61a755 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -566,6 +566,8 @@ int iwl_remove_default_wep_key(struct iwl_priv *priv,
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->sta_lock, flags);
+	IWL_DEBUG_WEP(priv, "Removing default WEP key: idx=%d\n",
+		      keyconf->keyidx);
 
 	if (!test_and_clear_bit(keyconf->keyidx, &priv->ucode_key_table))
 		IWL_ERR(priv, "index %d not used in uCode key table.\n",
@@ -573,6 +575,11 @@ int iwl_remove_default_wep_key(struct iwl_priv *priv,
 
 	priv->default_wep_key--;
 	memset(&priv->wep_keys[keyconf->keyidx], 0, sizeof(priv->wep_keys[0]));
+	if (iwl_is_rfkill(priv)) {
+		IWL_DEBUG_WEP(priv, "Not sending REPLY_WEPKEY command due to RFKILL.\n");
+		spin_unlock_irqrestore(&priv->sta_lock, flags);
+		return 0;
+	}
 	ret = iwl_send_static_wepkey_cmd(priv, 1);
 	IWL_DEBUG_WEP(priv, "Remove default WEP key: idx=%d ret=%d\n",
 		      keyconf->keyidx, ret);
@@ -853,6 +860,11 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
 	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
 	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
 
+	if (iwl_is_rfkill(priv)) {
+		IWL_DEBUG_WEP(priv, "Not sending REPLY_ADD_STA command because RFKILL enabled. \n");
+		spin_unlock_irqrestore(&priv->sta_lock, flags);
+		return 0;
+	}
 	ret =  iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 	return ret;
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 85ae7a62109..2e89040e63b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -720,8 +720,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 		goto drop_unlock;
 	}
 
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	hdr_len = ieee80211_hdrlen(fc);
 
 	/* Find (or create) index into station table for destination station */
@@ -729,7 +727,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	if (sta_id == IWL_INVALID_STATION) {
 		IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
 			       hdr->addr1);
-		goto drop;
+		goto drop_unlock;
 	}
 
 	IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
@@ -750,14 +748,17 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 			txq_id = priv->stations[sta_id].tid[tid].agg.txq_id;
 			swq_id = iwl_virtual_agg_queue_num(swq_id, txq_id);
 		}
-		priv->stations[sta_id].tid[tid].tfds_in_queue++;
 	}
 
 	txq = &priv->txq[txq_id];
 	q = &txq->q;
 	txq->swq_id = swq_id;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	if (unlikely(iwl_queue_space(q) < q->high_mark))
+		goto drop_unlock;
+
+	if (ieee80211_is_data_qos(fc))
+		priv->stations[sta_id].tid[tid].tfds_in_queue++;
 
 	/* Set up driver data for this TFD */
 	memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info));
@@ -872,7 +873,8 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
 
 	/* Set up entry for this TFD in Tx byte-count array */
-	priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
+	if (info->flags & IEEE80211_TX_CTL_AMPDU)
+		priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
 						     le16_to_cpu(tx_cmd->len));
 
 	pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys,
@@ -901,7 +903,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 drop_unlock:
 	spin_unlock_irqrestore(&priv->lock, flags);
-drop:
 	return -1;
 }
 EXPORT_SYMBOL(iwl_tx_skb);
@@ -1170,6 +1171,8 @@ int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn)
 		IWL_ERR(priv, "Start AGG on invalid station\n");
 		return -ENXIO;
 	}
+	if (unlikely(tid >= MAX_TID_COUNT))
+		return -EINVAL;
 
 	if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_OFF) {
 		IWL_ERR(priv, "Start AGG when state is not IWL_AGG_OFF !\n");
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index cb9bd4c8f25..523843369ca 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3643,12 +3643,10 @@ static ssize_t show_power_level(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
-	int mode = priv->power_data.user_power_setting;
 	int level = priv->power_data.power_mode;
 	char *p = buf;
 
-	p += sprintf(p, "INDEX:%d\t", level);
-	p += sprintf(p, "USER:%d\n", mode);
+	p += sprintf(p, "%d\n", level);
 	return p - buf + 1;
 }
 
@@ -3970,6 +3968,9 @@ static int iwl3945_setup_mac(struct iwl_priv *priv)
 
 	hw->wiphy->custom_regulatory = true;
 
+	/* Firmware does not support this */
+	hw->wiphy->disable_beacon_hints = true;
+
 	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
 	/* we create the 802.11 header and a zero-length SSID element */
 	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
@@ -4020,10 +4021,10 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	SET_IEEE80211_DEV(hw, &pdev->dev);
 
 	if ((iwl3945_mod_params.num_of_queues > IWL39_MAX_NUM_QUEUES) ||
-	     (iwl3945_mod_params.num_of_queues < IWL_MIN_NUM_QUEUES)) {
+	     (iwl3945_mod_params.num_of_queues < IWL39_MIN_NUM_QUEUES)) {
 		IWL_ERR(priv,
 			"invalid queues_num, should be between %d and %d\n",
-			IWL_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
+			IWL39_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
 		err = -EINVAL;
 		goto out_ieee80211_free_hw;
 	}
diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig
index 1eccb6df46d..030401d367d 100644
--- a/drivers/net/wireless/iwmc3200wifi/Kconfig
+++ b/drivers/net/wireless/iwmc3200wifi/Kconfig
@@ -4,6 +4,15 @@ config IWM
 	depends on CFG80211
 	select WIRELESS_EXT
 	select FW_LOADER
+	help
+	  The Intel Wireless Multicomm 3200 hardware is a combo
+	  card with GPS, Bluetooth, WiMax and 802.11 radios. It
+	  runs over SDIO and is typically found on Moorestown
+	  based platform. This driver takes care of the 802.11
+	  part, which is a fullmac one.
+
+	  If you choose to build it as a module, it'll be called
+	  iwmc3200wifi.ko.
 
 config IWM_DEBUG
 	bool "Enable full debugging output in iwmc3200wifi"
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c
index 834a7f544e5..e2334d12359 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.c
+++ b/drivers/net/wireless/iwmc3200wifi/commands.c
@@ -220,6 +220,7 @@ int iwm_store_rxiq_calib_result(struct iwm_priv *iwm)
 	eeprom_rxiq = iwm_eeprom_access(iwm, IWM_EEPROM_CALIB_RXIQ);
 	if (IS_ERR(eeprom_rxiq)) {
 		IWM_ERR(iwm, "Couldn't access EEPROM RX IQ entry\n");
+		kfree(rxiq);
 		return PTR_ERR(eeprom_rxiq);
 	}
 
diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c
index aaa20c6885c..bf294e41753 100644
--- a/drivers/net/wireless/iwmc3200wifi/netdev.c
+++ b/drivers/net/wireless/iwmc3200wifi/netdev.c
@@ -106,10 +106,8 @@ void *iwm_if_alloc(int sizeof_bus, struct device *dev,
 	int ret = 0;
 
 	wdev = iwm_wdev_alloc(sizeof_bus, dev);
-	if (!wdev) {
-		dev_err(dev, "no memory for wireless device instance\n");
-		return ERR_PTR(-ENOMEM);
-	}
+	if (IS_ERR(wdev))
+		return wdev;
 
 	iwm = wdev_to_iwm(wdev);
 	iwm->bus_ops = if_ops;
@@ -151,8 +149,8 @@ void iwm_if_free(struct iwm_priv *iwm)
 		return;
 
 	free_netdev(iwm_to_ndev(iwm));
-	iwm_wdev_free(iwm);
 	iwm_priv_deinit(iwm);
+	iwm_wdev_free(iwm);
 }
 
 int iwm_if_add(struct iwm_priv *iwm)
diff --git a/drivers/net/wireless/libertas/11d.c b/drivers/net/wireless/libertas/11d.c
index 9a5408e7d94..5c6968101f0 100644
--- a/drivers/net/wireless/libertas/11d.c
+++ b/drivers/net/wireless/libertas/11d.c
@@ -47,7 +47,7 @@ static u8 lbs_region_2_code(u8 *region)
 {
 	u8 i;
 
-	for (i = 0; region[i] && i < COUNTRY_CODE_LEN; i++)
+	for (i = 0; i < COUNTRY_CODE_LEN && region[i]; i++)
 		region[i] = toupper(region[i]);
 
 	for (i = 0; i < ARRAY_SIZE(region_code_mapping); i++) {
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 01db705a38e..685098148e1 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -135,8 +135,14 @@ int lbs_update_hw_spec(struct lbs_private *priv)
 	/* Clamp region code to 8-bit since FW spec indicates that it should
 	 * only ever be 8-bit, even though the field size is 16-bit.  Some firmware
 	 * returns non-zero high 8 bits here.
+	 *
+	 * Firmware version 4.0.102 used in CF8381 has region code shifted.  We
+	 * need to check for this problem and handle it properly.
 	 */
-	priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF;
+	if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V4)
+		priv->regioncode = (le16_to_cpu(cmd.regioncode) >> 8) & 0xFF;
+	else
+		priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF;
 
 	for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) {
 		/* use the region code to search for the index */
diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
index 48da157d6cd..72f3479a4d7 100644
--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -234,6 +234,8 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in
 /** Mesh enable bit in FW capability */
 #define MESH_CAPINFO_ENABLE_MASK			(1<<16)
 
+/** FW definition from Marvell v4 */
+#define MRVL_FW_V4					(0x04)
 /** FW definition from Marvell v5 */
 #define MRVL_FW_V5					(0x05)
 /** FW definition from Marvell v10 */
diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h
index 0a2e29140ad..c8a1998d474 100644
--- a/drivers/net/wireless/libertas/hostcmd.h
+++ b/drivers/net/wireless/libertas/hostcmd.h
@@ -56,8 +56,8 @@ struct rxpd {
 			u8 bss_type;
 			/* BSS number */
 			u8 bss_num;
-		} bss;
-	} u;
+		} __attribute__ ((packed)) bss;
+	} __attribute__ ((packed)) u;
 
 	/* SNR */
 	u8 snr;
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index 601b5424967..6c95af3023c 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -5,6 +5,7 @@
   *  for sending scan commands to the firmware.
   */
 #include <linux/types.h>
+#include <linux/kernel.h>
 #include <linux/etherdevice.h>
 #include <linux/if_arp.h>
 #include <asm/unaligned.h>
@@ -876,7 +877,7 @@ static inline char *lbs_translate_scan(struct lbs_private *priv,
 	iwe.u.bitrate.disabled = 0;
 	iwe.u.bitrate.value = 0;
 
-	for (j = 0; bss->rates[j] && (j < sizeof(bss->rates)); j++) {
+	for (j = 0; j < ARRAY_SIZE(bss->rates) && bss->rates[j]; j++) {
 		/* Bit rate given in 500 kb/s units */
 		iwe.u.bitrate.value = bss->rates[j] * 500000;
 		current_val = iwe_stream_add_value(info, start, current_val,
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index e789c6e9938..7916ca3f84c 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -418,6 +418,7 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
 			continue;
 
 		if (!data2->started || !hwsim_ps_rx_ok(data2, skb) ||
+		    !data->channel || !data2->channel ||
 		    data->channel->center_freq != data2->channel->center_freq ||
 		    !(data->group & data2->group))
 			continue;
@@ -708,7 +709,7 @@ static const struct ieee80211_ops mac80211_hwsim_ops =
 static void mac80211_hwsim_free(void)
 {
 	struct list_head tmplist, *i, *tmp;
-	struct mac80211_hwsim_data *data;
+	struct mac80211_hwsim_data *data, *tmpdata;
 
 	INIT_LIST_HEAD(&tmplist);
 
@@ -717,7 +718,7 @@ static void mac80211_hwsim_free(void)
 		list_move(i, &tmplist);
 	spin_unlock_bh(&hwsim_radio_lock);
 
-	list_for_each_entry(data, &tmplist, list) {
+	list_for_each_entry_safe(data, tmpdata, &tmplist, list) {
 		debugfs_remove(data->debugfs_group);
 		debugfs_remove(data->debugfs_ps);
 		debugfs_remove(data->debugfs);
@@ -1166,8 +1167,8 @@ static void __exit exit_mac80211_hwsim(void)
 {
 	printk(KERN_DEBUG "mac80211_hwsim: unregister radios\n");
 
-	unregister_netdev(hwsim_mon);
 	mac80211_hwsim_free();
+	unregister_netdev(hwsim_mon);
 }
 
 
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index a263d5c84c0..83967afe082 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -261,7 +261,7 @@ struct mwl8k_vif {
 	 */
 };
 
-#define MWL8K_VIF(_vif) (struct mwl8k_vif *)(&((_vif)->drv_priv))
+#define MWL8K_VIF(_vif) ((struct mwl8k_vif *)&((_vif)->drv_priv))
 
 static const struct ieee80211_channel mwl8k_channels[] = {
 	{ .center_freq = 2412, .hw_value = 1, },
@@ -1012,6 +1012,8 @@ static int rxq_process(struct ieee80211_hw *hw, int index, int limit)
 		rmb();
 
 		skb = rxq->rx_skb[rxq->rx_head];
+		if (skb == NULL)
+			break;
 		rxq->rx_skb[rxq->rx_head] = NULL;
 
 		rxq->rx_head = (rxq->rx_head + 1) % MWL8K_RX_DESCS;
@@ -1591,6 +1593,9 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd)
 	timeout = wait_for_completion_timeout(&cmd_wait,
 				msecs_to_jiffies(MWL8K_CMD_TIMEOUT_MS));
 
+	pci_unmap_single(priv->pdev, dma_addr, dma_size,
+					PCI_DMA_BIDIRECTIONAL);
+
 	result = &cmd->result;
 	if (!timeout) {
 		spin_lock_irq(&priv->fw_lock);
@@ -1610,8 +1615,6 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd)
 			       *result);
 	}
 
-	pci_unmap_single(priv->pdev, dma_addr, dma_size,
-					PCI_DMA_BIDIRECTIONAL);
 	return rc;
 }
 
@@ -1654,18 +1657,18 @@ static int mwl8k_cmd_get_hw_spec(struct ieee80211_hw *hw)
 	memset(cmd->perm_addr, 0xff, sizeof(cmd->perm_addr));
 	cmd->ps_cookie = cpu_to_le32(priv->cookie_dma);
 	cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rx_desc_dma);
-	cmd->num_tx_queues = MWL8K_TX_QUEUES;
+	cmd->num_tx_queues = cpu_to_le32(MWL8K_TX_QUEUES);
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
 		cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].tx_desc_dma);
-	cmd->num_tx_desc_per_queue = MWL8K_TX_DESCS;
-	cmd->total_rx_desc = MWL8K_RX_DESCS;
+	cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS);
+	cmd->total_rx_desc = cpu_to_le32(MWL8K_RX_DESCS);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 
 	if (!rc) {
 		SET_IEEE80211_PERM_ADDR(hw, cmd->perm_addr);
 		priv->num_mcaddrs = le16_to_cpu(cmd->num_mcaddrs);
-		priv->fw_rev = cmd->fw_rev;
+		priv->fw_rev = le32_to_cpu(cmd->fw_rev);
 		priv->hw_rev = cmd->hw_rev;
 		priv->region_code = le16_to_cpu(cmd->region_code);
 	}
@@ -3216,15 +3219,19 @@ static int mwl8k_configure_filter_wt(struct work_struct *wt)
 	struct dev_addr_list *mclist = worker->mclist;
 
 	struct mwl8k_priv *priv = hw->priv;
-	struct mwl8k_vif *mv_vif;
 	int rc = 0;
 
 	if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
 		if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
 			rc = mwl8k_cmd_set_pre_scan(hw);
 		else {
-			mv_vif = MWL8K_VIF(priv->vif);
-			rc = mwl8k_cmd_set_post_scan(hw, mv_vif->bssid);
+			u8 *bssid;
+
+			bssid = "\x00\x00\x00\x00\x00\x00";
+			if (priv->vif != NULL)
+				bssid = MWL8K_VIF(priv->vif)->bssid;
+
+			rc = mwl8k_cmd_set_post_scan(hw, bssid);
 		}
 	}
 
@@ -3726,6 +3733,8 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev)
 
 	ieee80211_stop_queues(hw);
 
+	ieee80211_unregister_hw(hw);
+
 	/* Remove tx reclaim tasklet */
 	tasklet_kill(&priv->tx_reclaim_task);
 
@@ -3739,8 +3748,6 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev)
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
 		mwl8k_txq_reclaim(hw, i, 1);
 
-	ieee80211_unregister_hw(hw);
-
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
 		mwl8k_txq_deinit(hw, i);
 
diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c
index 632fac86a30..b3946272c72 100644
--- a/drivers/net/wireless/orinoco/hw.c
+++ b/drivers/net/wireless/orinoco/hw.c
@@ -70,7 +70,7 @@ int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc)
 	int err = 0;
 	u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE];
 
-	if ((key < 0) || (key > 4))
+	if ((key < 0) || (key >= 4))
 		return -EINVAL;
 
 	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index 345593c4acc..a370e510f19 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -2521,6 +2521,8 @@ static const struct net_device_ops orinoco_netdev_ops = {
 	.ndo_start_xmit		= orinoco_xmit,
 	.ndo_set_multicast_list	= orinoco_set_multicast_list,
 	.ndo_change_mtu		= orinoco_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_tx_timeout		= orinoco_tx_timeout,
 	.ndo_get_stats		= orinoco_get_stats,
 };
@@ -2555,7 +2557,6 @@ struct net_device
 	priv->wireless_data.spy_data = &priv->spy_data;
 	dev->wireless_data = &priv->wireless_data;
 #endif
-	/* we use the default eth_mac_addr for setting the MAC addr */
 
 	/* Reserve space in skb for the SNAP header */
 	dev->hard_header_len += ENCAPS_OVERHEAD;
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index b618bd14583..22ca122bd79 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -823,30 +823,30 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct p54_tx_info *range;
 	unsigned long flags;
 
-	if (unlikely(!skb || !dev || skb_queue_empty(&priv->tx_queue)))
+	if (unlikely(!skb || !dev || !skb_queue_len(&priv->tx_queue)))
 		return;
 
-	/* There used to be a check here to see if the SKB was on the
-	 * TX queue or not.  This can never happen because all SKBs we
-	 * see here successfully went through p54_assign_address()
-	 * which means the SKB is on the ->tx_queue.
+	/*
+	 * don't try to free an already unlinked skb
 	 */
+	if (unlikely((!skb->next) || (!skb->prev)))
+		return;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
 	info = IEEE80211_SKB_CB(skb);
 	range = (void *)info->rate_driver_data;
-	if (!skb_queue_is_first(&priv->tx_queue, skb)) {
+	if (skb->prev != (struct sk_buff *)&priv->tx_queue) {
 		struct ieee80211_tx_info *ni;
 		struct p54_tx_info *mr;
 
-		ni = IEEE80211_SKB_CB(skb_queue_prev(&priv->tx_queue, skb));
+		ni = IEEE80211_SKB_CB(skb->prev);
 		mr = (struct p54_tx_info *)ni->rate_driver_data;
 	}
-	if (!skb_queue_is_last(&priv->tx_queue, skb)) {
+	if (skb->next != (struct sk_buff *)&priv->tx_queue) {
 		struct ieee80211_tx_info *ni;
 		struct p54_tx_info *mr;
 
-		ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue, skb));
+		ni = IEEE80211_SKB_CB(skb->next);
 		mr = (struct p54_tx_info *)ni->rate_driver_data;
 	}
 	__skb_unlink(skb, &priv->tx_queue);
@@ -864,13 +864,15 @@ static struct sk_buff *p54_find_tx_entry(struct ieee80211_hw *dev,
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
-	skb_queue_walk(&priv->tx_queue, entry) {
+	entry = priv->tx_queue.next;
+	while (entry != (struct sk_buff *)&priv->tx_queue) {
 		struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
 
 		if (hdr->req_id == req_id) {
 			spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 			return entry;
 		}
+		entry = entry->next;
 	}
 	spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 	return NULL;
@@ -888,33 +890,36 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 	int count, idx;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
-	skb_queue_walk(&priv->tx_queue, entry) {
+	entry = (struct sk_buff *) priv->tx_queue.next;
+	while (entry != (struct sk_buff *)&priv->tx_queue) {
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
 		struct p54_hdr *entry_hdr;
 		struct p54_tx_data *entry_data;
 		unsigned int pad = 0, frame_len;
 
 		range = (void *)info->rate_driver_data;
-		if (range->start_addr != addr)
+		if (range->start_addr != addr) {
+			entry = entry->next;
 			continue;
+		}
 
-		if (!skb_queue_is_last(&priv->tx_queue, entry)) {
+		if (entry->next != (struct sk_buff *)&priv->tx_queue) {
 			struct ieee80211_tx_info *ni;
 			struct p54_tx_info *mr;
 
-			ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue,
-							     entry));
+			ni = IEEE80211_SKB_CB(entry->next);
 			mr = (struct p54_tx_info *)ni->rate_driver_data;
 		}
 
 		__skb_unlink(entry, &priv->tx_queue);
-		spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
 		frame_len = entry->len;
 		entry_hdr = (struct p54_hdr *) entry->data;
 		entry_data = (struct p54_tx_data *) entry_hdr->data;
-		priv->tx_stats[entry_data->hw_queue].len--;
+		if (priv->tx_stats[entry_data->hw_queue].len)
+			priv->tx_stats[entry_data->hw_queue].len--;
 		priv->stats.dot11ACKFailureCount += payload->tries - 1;
+		spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
 		/*
 		 * Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are
@@ -1164,21 +1169,23 @@ static int p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb,
 		}
 	}
 
-	skb_queue_walk(&priv->tx_queue, entry) {
+	entry = priv->tx_queue.next;
+	while (left--) {
 		u32 hole_size;
 		info = IEEE80211_SKB_CB(entry);
 		range = (void *)info->rate_driver_data;
 		hole_size = range->start_addr - last_addr;
 		if (!target_skb && hole_size >= len) {
-			target_skb = skb_queue_prev(&priv->tx_queue, entry);
+			target_skb = entry->prev;
 			hole_size -= len;
 			target_addr = last_addr;
 		}
 		largest_hole = max(largest_hole, hole_size);
 		last_addr = range->end_addr;
+		entry = entry->next;
 	}
 	if (!target_skb && priv->rx_end - last_addr >= len) {
-		target_skb = skb_peek_tail(&priv->tx_queue);
+		target_skb = priv->tx_queue.prev;
 		largest_hole = max(largest_hole, priv->rx_end - last_addr - len);
 		if (!skb_queue_empty(&priv->tx_queue)) {
 			info = IEEE80211_SKB_CB(target_skb);
@@ -2084,6 +2091,7 @@ out:
 static void p54_stop(struct ieee80211_hw *dev)
 {
 	struct p54_common *priv = dev->priv;
+	struct sk_buff *skb;
 
 	mutex_lock(&priv->conf_mutex);
 	priv->mode = NL80211_IFTYPE_UNSPECIFIED;
@@ -2098,7 +2106,8 @@ static void p54_stop(struct ieee80211_hw *dev)
 		p54_tx_cancel(dev, priv->cached_beacon);
 
 	priv->stop(dev);
-	skb_queue_purge(&priv->tx_queue);
+	while ((skb = skb_dequeue(&priv->tx_queue)))
+		kfree_skb(skb);
 	priv->cached_beacon = NULL;
 	priv->tsf_high32 = priv->tsf_low32 = 0;
 	mutex_unlock(&priv->conf_mutex);
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index 83116baeb11..72c7dbd39d0 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -635,7 +635,7 @@ static int __devinit p54spi_probe(struct spi_device *spi)
 
 	hw = p54_init_common(sizeof(*priv));
 	if (!hw) {
-		dev_err(&priv->spi->dev, "could not alloc ieee80211_hw");
+		dev_err(&spi->dev, "could not alloc ieee80211_hw");
 		return -ENOMEM;
 	}
 
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index b10b0383dfa..698b11b1cad 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -2427,11 +2427,10 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
 
 #ifdef PCMCIA_DEBUG
 	if (pc_debug > 3) {
-		int i;
-		printk(KERN_DEBUG "skb->data before untranslate");
-		for (i = 0; i < 64; i++)
-			printk("%02x ", skb->data[i]);
-		printk("\n" KERN_DEBUG
+		print_hex_dump(KERN_DEBUG, "skb->data before untranslate: ",
+			       DUMP_PREFIX_NONE, 16, 1,
+			       skb->data, 64, true);
+		printk(KERN_DEBUG
 		       "type = %08x, xsap = %02x%02x%02x, org = %02x02x02x\n",
 		       ntohs(type), psnap->dsap, psnap->ssap, psnap->ctrl,
 		       psnap->org[0], psnap->org[1], psnap->org[2]);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 66daf68ff0e..ce75426764a 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1550,7 +1550,9 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
 
-	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0)) {
+	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0) ||
+	    rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
+
 		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
 		return -ENODEV;
 	}
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index a498dde024e..49c9e2c1433 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -849,13 +849,15 @@ struct rt2x00_dev {
 static inline void rt2x00_rf_read(struct rt2x00_dev *rt2x00dev,
 				  const unsigned int word, u32 *data)
 {
-	*data = rt2x00dev->rf[word];
+	BUG_ON(word < 1 || word > rt2x00dev->ops->rf_size / sizeof(u32));
+	*data = rt2x00dev->rf[word - 1];
 }
 
 static inline void rt2x00_rf_write(struct rt2x00_dev *rt2x00dev,
 				   const unsigned int word, u32 data)
 {
-	rt2x00dev->rf[word] = data;
+	BUG_ON(word < 1 || word > rt2x00dev->ops->rf_size / sizeof(u32));
+	rt2x00dev->rf[word - 1] = data;
 }
 
 /*
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 294250e294d..87a95588a8e 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -869,6 +869,9 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev)
 	priv->aifsn[3] = 3; /* AIFSN[AC_BE] */
 	rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0);
 
+	/* ENEDCA flag must always be set, transmit issues? */
+	rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA);
+
 	return 0;
 }
 
@@ -1173,13 +1176,16 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
 			rtl818x_iowrite8(priv, &priv->map->BSSID[i],
 					 info->bssid[i]);
 
+		if (priv->is_rtl8187b)
+			reg = RTL818X_MSR_ENEDCA;
+		else
+			reg = 0;
+
 		if (is_valid_ether_addr(info->bssid)) {
-			reg = RTL818X_MSR_INFRA;
-			if (priv->is_rtl8187b)
-				reg |= RTL818X_MSR_ENEDCA;
+			reg |= RTL818X_MSR_INFRA;
 			rtl818x_iowrite8(priv, &priv->map->MSR, reg);
 		} else {
-			reg = RTL818X_MSR_NO_LINK;
+			reg |= RTL818X_MSR_NO_LINK;
 			rtl818x_iowrite8(priv, &priv->map->MSR, reg);
 		}
 
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c
index b4425359224..cf9f899fe0e 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c
@@ -208,11 +208,12 @@ void rtl8187_leds_exit(struct ieee80211_hw *dev)
 {
 	struct rtl8187_priv *priv = dev->priv;
 
-	rtl8187_unregister_led(&priv->led_tx);
 	/* turn the LED off before exiting */
 	queue_delayed_work(dev->workqueue, &priv->led_off, 0);
 	cancel_delayed_work_sync(&priv->led_off);
+	cancel_delayed_work_sync(&priv->led_on);
 	rtl8187_unregister_led(&priv->led_rx);
+	rtl8187_unregister_led(&priv->led_tx);
 }
 #endif /* def CONFIG_RTL8187_LED */
 
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 6af706408ac..c6d300666ad 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -3556,17 +3556,8 @@ wv_82593_config(struct net_device *	dev)
   cfblk.rcvstop = TRUE; 	/* Enable Receive Stop Register */
 
 #ifdef DEBUG_I82593_SHOW
-  {
-    u_char *c = (u_char *) &cfblk;
-    int i;
-    printk(KERN_DEBUG "wavelan_cs: config block:");
-    for(i = 0; i < sizeof(struct i82593_conf_block); i++,c++)
-      {
-	if((i % 16) == 0) printk("\n" KERN_DEBUG);
-	printk("%02x ", *c);
-      }
-    printk("\n");
-  }
+  print_hex_dump(KERN_DEBUG, "wavelan_cs: config block: ", DUMP_PREFIX_NONE,
+		 16, 1, &cfblk, sizeof(struct i82593_conf_block), false);
 #endif
 
   /* Copy the config block to the i82593 */
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 40b07b98822..3bd3c779fff 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -698,7 +698,7 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
 			&& !mac->pass_ctrl)
 		return 0;
 
-	fc = *(__le16 *)buffer;
+	fc = get_unaligned((__le16*)buffer);
 	need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc);
 
 	skb = dev_alloc_skb(length + (need_padding ? 2 : 0));
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 14a19baff21..0e6e44689cc 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -38,7 +38,6 @@ static struct usb_device_id usb_ids[] = {
 	/* ZD1211 */
 	{ USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 },
-	{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 },
@@ -61,6 +60,7 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
 	/* ZD1211B */
+	{ USB_DEVICE(0x054c, 0x0257), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
@@ -87,6 +87,7 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
+	{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211B },
 	/* "Driverless" devices that need ejecting */
 	{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
 	{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 3c7a5053f1d..c2fd6187773 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -109,7 +109,7 @@ static int gx_fix;
 /* These identify the driver base version and may not be removed. */
 static const char version[] __devinitconst =
   KERN_INFO DRV_NAME ".c:v1.05  1/09/2001  Written by Donald Becker <becker@scyld.com>\n"
-  KERN_INFO "  (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
+  "  (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
 
 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
 MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver");
@@ -346,7 +346,7 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 static int yellowfin_open(struct net_device *dev);
 static void yellowfin_timer(unsigned long data);
 static void yellowfin_tx_timeout(struct net_device *dev);
-static void yellowfin_init_ring(struct net_device *dev);
+static int yellowfin_init_ring(struct net_device *dev);
 static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance);
 static int yellowfin_rx(struct net_device *dev);
@@ -573,19 +573,24 @@ static int yellowfin_open(struct net_device *dev)
 {
 	struct yellowfin_private *yp = netdev_priv(dev);
 	void __iomem *ioaddr = yp->base;
-	int i;
+	int i, ret;
 
 	/* Reset the chip. */
 	iowrite32(0x80000000, ioaddr + DMACtrl);
 
-	i = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
-	if (i) return i;
+	ret = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
+	if (ret)
+		return ret;
 
 	if (yellowfin_debug > 1)
 		printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n",
 			   dev->name, dev->irq);
 
-	yellowfin_init_ring(dev);
+	ret = yellowfin_init_ring(dev);
+	if (ret) {
+		free_irq(dev->irq, dev);
+		return ret;
+	}
 
 	iowrite32(yp->rx_ring_dma, ioaddr + RxPtr);
 	iowrite32(yp->tx_ring_dma, ioaddr + TxPtr);
@@ -700,12 +705,15 @@ static void yellowfin_tx_timeout(struct net_device *dev)
 		int i;
 		printk(KERN_WARNING "  Rx ring %p: ", yp->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++)
-			printk(" %8.8x", yp->rx_ring[i].result_status);
-		printk("\n"KERN_WARNING"  Tx ring %p: ", yp->tx_ring);
+			printk(KERN_CONT " %8.8x",
+			       yp->rx_ring[i].result_status);
+		printk(KERN_CONT "\n");
+		printk(KERN_WARNING"  Tx ring %p: ", yp->tx_ring);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(" %4.4x /%8.8x", yp->tx_status[i].tx_errs,
-				   yp->tx_ring[i].result_status);
-		printk("\n");
+			printk(KERN_CONT " %4.4x /%8.8x",
+			       yp->tx_status[i].tx_errs,
+			       yp->tx_ring[i].result_status);
+		printk(KERN_CONT "\n");
 	}
 
 	/* If the hardware is found to hang regularly, we will update the code
@@ -722,10 +730,10 @@ static void yellowfin_tx_timeout(struct net_device *dev)
 }
 
 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void yellowfin_init_ring(struct net_device *dev)
+static int yellowfin_init_ring(struct net_device *dev)
 {
 	struct yellowfin_private *yp = netdev_priv(dev);
-	int i;
+	int i, j;
 
 	yp->tx_full = 0;
 	yp->cur_rx = yp->cur_tx = 0;
@@ -750,6 +758,11 @@ static void yellowfin_init_ring(struct net_device *dev)
 		yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
 			skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
 	}
+	if (i != RX_RING_SIZE) {
+		for (j = 0; j < i; j++)
+			dev_kfree_skb(yp->rx_skbuff[j]);
+		return -ENOMEM;
+	}
 	yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP);
 	yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
 
@@ -766,8 +779,6 @@ static void yellowfin_init_ring(struct net_device *dev)
 	yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS);
 #else
 {
-	int j;
-
 	/* Tx ring needs a pair of descriptors, the second for the status. */
 	for (i = 0; i < TX_RING_SIZE; i++) {
 		j = 2*i;
@@ -802,7 +813,7 @@ static void yellowfin_init_ring(struct net_device *dev)
 }
 #endif
 	yp->tx_tail_desc = &yp->tx_status[0];
-	return;
+	return 0;
 }
 
 static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -1216,20 +1227,20 @@ static int yellowfin_close(struct net_device *dev)
 
 #if defined(__i386__)
 	if (yellowfin_debug > 2) {
-		printk("\n"KERN_DEBUG"  Tx ring at %8.8llx:\n",
+		printk(KERN_DEBUG"  Tx ring at %8.8llx:\n",
 				(unsigned long long)yp->tx_ring_dma);
 		for (i = 0; i < TX_RING_SIZE*2; i++)
-			printk(" %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
+			printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
 				   ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ',
 				   i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr,
 				   yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status);
 		printk(KERN_DEBUG "  Tx status %p:\n", yp->tx_status);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk("   #%d status %4.4x %4.4x %4.4x %4.4x.\n",
+			printk(KERN_DEBUG "   #%d status %4.4x %4.4x %4.4x %4.4x.\n",
 				   i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs,
 				   yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused);
 
-		printk("\n"KERN_DEBUG "  Rx ring %8.8llx:\n",
+		printk(KERN_DEBUG "  Rx ring %8.8llx:\n",
 				(unsigned long long)yp->rx_ring_dma);
 		for (i = 0; i < RX_RING_SIZE; i++) {
 			printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n",
diff --git a/drivers/net/zorro8390.c b/drivers/net/zorro8390.c
index 37c84e3b8be..81c753a617a 100644
--- a/drivers/net/zorro8390.c
+++ b/drivers/net/zorro8390.c
@@ -120,6 +120,9 @@ static int __devinit zorro8390_init_one(struct zorro_dev *z,
     for (i = ARRAY_SIZE(cards)-1; i >= 0; i--)
 	if (z->id == cards[i].id)
 	    break;
+    if (i < 0)
+        return -ENODEV;
+
     board = z->resource.start;
     ioaddr = board+cards[i].offset;
     dev = alloc_ei_netdev();
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index aee967d7f76..bacaa536fd5 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -9,6 +9,10 @@
  * out of the OpenFirmware device tree and using it to populate an mii_bus.
  */
 
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/err.h>
 #include <linux/phy.h>
 #include <linux/of.h>
 #include <linux/of_mdio.h>
@@ -137,3 +141,41 @@ struct phy_device *of_phy_connect(struct net_device *dev,
 	return phy_connect_direct(dev, phy, hndlr, flags, iface) ? NULL : phy;
 }
 EXPORT_SYMBOL(of_phy_connect);
+
+/**
+ * of_phy_connect_fixed_link - Parse fixed-link property and return a dummy phy
+ * @dev: pointer to net_device claiming the phy
+ * @hndlr: Link state callback for the network device
+ * @iface: PHY data interface type
+ *
+ * This function is a temporary stop-gap and will be removed soon.  It is
+ * only to support the fs_enet, ucc_geth and gianfar Ethernet drivers.  Do
+ * not call this function from new drivers.
+ */
+struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
+					     void (*hndlr)(struct net_device *),
+					     phy_interface_t iface)
+{
+	struct device_node *net_np;
+	char bus_id[MII_BUS_ID_SIZE + 3];
+	struct phy_device *phy;
+	const u32 *phy_id;
+	int sz;
+
+	if (!dev->dev.parent)
+		return NULL;
+
+	net_np = dev_archdata_get_node(&dev->dev.parent->archdata);
+	if (!net_np)
+		return NULL;
+
+	phy_id = of_get_property(net_np, "fixed-link", &sz);
+	if (!phy_id || sz < sizeof(*phy_id))
+		return NULL;
+
+	sprintf(bus_id, PHY_ID_FMT, "0", phy_id[0]);
+
+	phy = phy_connect(dev, bus_id, hndlr, 0, iface);
+	return IS_ERR(phy) ? NULL : phy;
+}
+EXPORT_SYMBOL(of_phy_connect_fixed_link);
diff --git a/drivers/oprofile/oprofile_stats.c b/drivers/oprofile/oprofile_stats.c
index e1f6ce03705..3c2270a8300 100644
--- a/drivers/oprofile/oprofile_stats.c
+++ b/drivers/oprofile/oprofile_stats.c
@@ -33,6 +33,7 @@ void oprofile_reset_stats(void)
 	atomic_set(&oprofile_stats.sample_lost_no_mm, 0);
 	atomic_set(&oprofile_stats.sample_lost_no_mapping, 0);
 	atomic_set(&oprofile_stats.event_lost_overflow, 0);
+	atomic_set(&oprofile_stats.bt_lost_no_mapping, 0);
 }
 
 
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 5d610cbcfe8..a45b0c0d574 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -70,7 +70,6 @@
 #undef CCIO_COLLECT_STATS
 #endif
 
-#include <linux/proc_fs.h>
 #include <asm/runway.h>		/* for proc_runway_root */
 
 #ifdef DEBUG_CCIO_INIT
@@ -1134,7 +1133,7 @@ static const struct file_operations ccio_proc_bitmap_fops = {
 	.llseek = seq_lseek,
 	.release = single_release,
 };
-#endif
+#endif /* CONFIG_PROC_FS */
 
 /**
  * ccio_find_ioc - Find the ioc in the ioc_list
@@ -1568,14 +1567,15 @@ static int __init ccio_probe(struct parisc_device *dev)
 	/* if this fails, no I/O cards will work, so may as well bug */
 	BUG_ON(dev->dev.platform_data == NULL);
 	HBA_DATA(dev->dev.platform_data)->iommu = ioc;
-	
+
+#ifdef CONFIG_PROC_FS
 	if (ioc_count == 0) {
 		proc_create(MODULE_NAME, 0, proc_runway_root,
 			    &ccio_proc_info_fops);
 		proc_create(MODULE_NAME"-bitmap", 0, proc_runway_root,
 			    &ccio_proc_bitmap_fops);
 	}
-
+#endif
 	ioc_count++;
 
 	parisc_has_iommu();
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 52ae0b1d470..d69bde6a234 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -353,7 +353,7 @@ static unsigned int dino_startup_irq(unsigned int irq)
 	return 0;
 }
 
-static struct hw_interrupt_type dino_interrupt_type = {
+static struct irq_chip dino_interrupt_type = {
 	.typename	= "GSC-PCI",
 	.startup	= dino_startup_irq,
 	.shutdown	= dino_disable_irq,
@@ -614,7 +614,7 @@ dino_fixup_bus(struct pci_bus *bus)
 			    dev_name(&bus->self->dev), i,
 			    bus->self->resource[i].start,
 			    bus->self->resource[i].end);
-			pci_assign_resource(bus->self, i);
+			WARN_ON(pci_assign_resource(bus->self, i));
 			DBG("DEBUG %s after assign %d [0x%lx,0x%lx]\n",
 			    dev_name(&bus->self->dev), i,
 			    bus->self->resource[i].start,
@@ -1019,22 +1019,22 @@ static int __init dino_probe(struct parisc_device *dev)
 	** It's not used to avoid chicken/egg problems
 	** with configuration accessor functions.
 	*/
-	bus = pci_scan_bus_parented(&dev->dev, dino_current_bus,
-				    &dino_cfg_ops, NULL);
+	dino_dev->hba.hba_bus = bus = pci_scan_bus_parented(&dev->dev,
+			 dino_current_bus, &dino_cfg_ops, NULL);
+
 	if(bus) {
-		pci_bus_add_devices(bus);
 		/* This code *depends* on scanning being single threaded
 		 * if it isn't, this global bus number count will fail
 		 */
 		dino_current_bus = bus->subordinate + 1;
 		pci_bus_assign_resources(bus);
+		pci_bus_add_devices(bus);
 	} else {
-		printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n",
+		printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n",
 		       dev_name(&dev->dev), dino_current_bus);
 		/* increment the bus number in case of duplicates */
 		dino_current_bus++;
 	}
-	dino_dev->hba.hba_bus = bus;
 	return 0;
 }
 
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 5b89f404e66..51220749cb6 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -188,7 +188,7 @@ static unsigned int eisa_startup_irq(unsigned int irq)
 	return 0;
 }
 
-static struct hw_interrupt_type eisa_interrupt_type = {
+static struct irq_chip eisa_interrupt_type = {
 	.typename =	"EISA",
 	.startup =	eisa_startup_irq,
 	.shutdown =	eisa_disable_irq,
diff --git a/drivers/parisc/eisa_eeprom.c b/drivers/parisc/eisa_eeprom.c
index 685d94e69d4..8c0b26e9b98 100644
--- a/drivers/parisc/eisa_eeprom.c
+++ b/drivers/parisc/eisa_eeprom.c
@@ -55,7 +55,7 @@ static ssize_t eisa_eeprom_read(struct file * file,
 	ssize_t ret;
 	int i;
 	
-	if (*ppos >= HPEE_MAX_LENGTH)
+	if (*ppos < 0 || *ppos >= HPEE_MAX_LENGTH)
 		return 0;
 	
 	count = *ppos + count < HPEE_MAX_LENGTH ? count : HPEE_MAX_LENGTH - *ppos;
diff --git a/drivers/parisc/eisa_enumerator.c b/drivers/parisc/eisa_enumerator.c
index c709ecc2b7f..0be1d50645a 100644
--- a/drivers/parisc/eisa_enumerator.c
+++ b/drivers/parisc/eisa_enumerator.c
@@ -101,7 +101,7 @@ static int configure_memory(const unsigned char *buf,
 			printk("memory %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end);
 			result = request_resource(mem_parent, res);
 			if (result < 0) {
-				printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
+				printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
 				return result;
 			}
 		}
@@ -191,7 +191,7 @@ static int configure_port(const unsigned char *buf, struct resource *io_parent,
 			printk("ioports %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end);
 			result = request_resource(io_parent, res);
 			if (result < 0) {
-				printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
+				printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
 				return result;
 			}
 		}
@@ -224,7 +224,7 @@ static int configure_port_init(const unsigned char *buf)
 		 case HPEE_PORT_INIT_WIDTH_BYTE:
 			s=1;
 			if (c & HPEE_PORT_INIT_MASK) {
-				printk("\n" KERN_WARNING "port_init: unverified mask attribute\n");
+				printk(KERN_WARNING "port_init: unverified mask attribute\n");
 				outb((inb(get_16(buf+len+1) & 
 					  get_8(buf+len+3)) | 
 				      get_8(buf+len+4)), get_16(buf+len+1));
@@ -249,7 +249,7 @@ static int configure_port_init(const unsigned char *buf)
 		 case HPEE_PORT_INIT_WIDTH_DWORD:
 			s=4;
 			if (c & HPEE_PORT_INIT_MASK) {
- 				printk("\n" KERN_WARNING "port_init: unverified mask attribute\n");
+ 				printk(KERN_WARNING "port_init: unverified mask attribute\n");
 				outl((inl(get_16(buf+len+1) &
 					  get_32(buf+len+3)) |
 				      get_32(buf+len+7)), get_16(buf+len+1));
@@ -259,7 +259,7 @@ static int configure_port_init(const unsigned char *buf)
 
 			break;
 		 default:
-			printk("\n" KERN_ERR "Invalid port init word %02x\n", c);
+			printk(KERN_ERR "Invalid port init word %02x\n", c);
 			return 0;
 		}
 		
@@ -297,7 +297,7 @@ static int configure_type_string(const unsigned char *buf)
 	/* just skip past the type field */
 	len = get_8(buf);
 	if (len > 80) {
-		printk("\n" KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
+		printk(KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
 	}
 	
 	return 1+len;
@@ -398,7 +398,7 @@ static int parse_slot_config(int slot,
 		}
 		
 		if (p0 + function_len < pos) {
-			printk("\n" KERN_ERR "eisa_enumerator: function %d length mis-match "
+			printk(KERN_ERR "eisa_enumerator: function %d length mis-match "
 			       "got %d, expected %d\n",
 			       num_func, pos-p0, function_len);
 			res=-1;
diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c
index d3363291769..647adc9f85a 100644
--- a/drivers/parisc/gsc.c
+++ b/drivers/parisc/gsc.c
@@ -148,7 +148,7 @@ static unsigned int gsc_asic_startup_irq(unsigned int irq)
 	return 0;
 }
 
-static struct hw_interrupt_type gsc_asic_interrupt_type = {
+static struct irq_chip gsc_asic_interrupt_type = {
 	.typename =	"GSC-ASIC",
 	.startup =	gsc_asic_startup_irq,
 	.shutdown =	gsc_asic_disable_irq,
@@ -158,7 +158,7 @@ static struct hw_interrupt_type gsc_asic_interrupt_type = {
 	.end =		no_end_irq,
 };
 
-int gsc_assign_irq(struct hw_interrupt_type *type, void *data)
+int gsc_assign_irq(struct irq_chip *type, void *data)
 {
 	static int irq = GSC_IRQ_BASE;
 	struct irq_desc *desc;
diff --git a/drivers/parisc/gsc.h b/drivers/parisc/gsc.h
index 762a1babad6..b9d7bfb68e2 100644
--- a/drivers/parisc/gsc.h
+++ b/drivers/parisc/gsc.h
@@ -38,7 +38,7 @@ struct gsc_asic {
 int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic);
 int gsc_alloc_irq(struct gsc_irq *dev);			/* dev needs an irq */
 int gsc_claim_irq(struct gsc_irq *dev, int irq);	/* dev needs this irq */
-int gsc_assign_irq(struct hw_interrupt_type *type, void *data);
+int gsc_assign_irq(struct irq_chip *type, void *data);
 int gsc_find_local_irq(unsigned int irq, int *global_irq, int limit);
 void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl,
 		void (*choose)(struct parisc_device *child, void *ctrl));
diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c
index 13856415b43..815db175d42 100644
--- a/drivers/parisc/hppb.c
+++ b/drivers/parisc/hppb.c
@@ -62,7 +62,8 @@ static int hppb_probe(struct parisc_device *dev)
 		}
 		card = card->next;
 	}
-        printk(KERN_INFO "Found GeckoBoa at 0x%x\n", dev->hpa.start);
+	printk(KERN_INFO "Found GeckoBoa at 0x%llx\n",
+			(unsigned long long) dev->hpa.start);
 
 	card->hpa = dev->hpa.start;
 	card->mmio_region.name = "HP-PB Bus";
@@ -73,8 +74,10 @@ static int hppb_probe(struct parisc_device *dev)
 
 	status = ccio_request_resource(dev, &card->mmio_region);
 	if(status < 0) {
-		printk(KERN_ERR "%s: failed to claim HP-PB bus space (%08x, %08x)\n",
-			__FILE__, card->mmio_region.start, card->mmio_region.end);
+		printk(KERN_ERR "%s: failed to claim HP-PB "
+			"bus space (0x%08llx, 0x%08llx)\n",
+			__FILE__, (unsigned long long) card->mmio_region.start,
+			(unsigned long long) card->mmio_region.end);
 	}
 
         return 0;
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 4a9cc92d4d1..88e33355321 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -729,7 +729,7 @@ static int iosapic_set_affinity_irq(unsigned int irq,
 }
 #endif
 
-static struct hw_interrupt_type iosapic_interrupt_type = {
+static struct irq_chip iosapic_interrupt_type = {
 	.typename =	"IO-SAPIC-level",
 	.startup =	iosapic_startup_irq,
 	.shutdown =	iosapic_disable_irq,
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 59fbbf12836..3aeb3279c92 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -980,28 +980,38 @@ static void
 lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
 {
 	unsigned long bytecnt;
-	pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;	/* PA_VIEW */
-	pdc_pat_cell_mod_maddr_block_t io_pdc_cell;	/* IO_VIEW */
 	long io_count;
 	long status;	/* PDC return status */
 	long pa_count;
+	pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;	/* PA_VIEW */
+	pdc_pat_cell_mod_maddr_block_t *io_pdc_cell;	/* IO_VIEW */
 	int i;
 
+	pa_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
+	if (!pa_pdc_cell)
+		return;
+
+	io_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
+	if (!io_pdc_cell) {
+		kfree(pa_pdc_cell);
+		return;
+	}
+
 	/* return cell module (IO view) */
 	status = pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index,
-				PA_VIEW, & pa_pdc_cell);
-	pa_count = pa_pdc_cell.mod[1];
+				PA_VIEW, pa_pdc_cell);
+	pa_count = pa_pdc_cell->mod[1];
 
 	status |= pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index,
-				IO_VIEW, &io_pdc_cell);
-	io_count = io_pdc_cell.mod[1];
+				IO_VIEW, io_pdc_cell);
+	io_count = io_pdc_cell->mod[1];
 
 	/* We've already done this once for device discovery...*/
 	if (status != PDC_OK) {
 		panic("pdc_pat_cell_module() call failed for LBA!\n");
 	}
 
-	if (PAT_GET_ENTITY(pa_pdc_cell.mod_info) != PAT_ENTITY_LBA) {
+	if (PAT_GET_ENTITY(pa_pdc_cell->mod_info) != PAT_ENTITY_LBA) {
 		panic("pdc_pat_cell_module() entity returned != PAT_ENTITY_LBA!\n");
 	}
 
@@ -1016,8 +1026,8 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
 		} *p, *io;
 		struct resource *r;
 
-		p = (void *) &(pa_pdc_cell.mod[2+i*3]);
-		io = (void *) &(io_pdc_cell.mod[2+i*3]);
+		p = (void *) &(pa_pdc_cell->mod[2+i*3]);
+		io = (void *) &(io_pdc_cell->mod[2+i*3]);
 
 		/* Convert the PAT range data to PCI "struct resource" */
 		switch(p->type & 0xff) {
@@ -1096,6 +1106,9 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
 			break;
 		}
 	}
+
+	kfree(pa_pdc_cell);
+	kfree(io_pdc_cell);
 }
 #else
 /* keep compiler from complaining about missing declarations */
@@ -1509,10 +1522,6 @@ lba_driver_probe(struct parisc_device *dev)
 	lba_bus = lba_dev->hba.hba_bus =
 		pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start,
 				cfg_ops, NULL);
-	if (lba_bus) {
-		lba_next_bus = lba_bus->subordinate + 1;
-		pci_bus_add_devices(lba_bus);
-	}
 
 	/* This is in lieu of calling pci_assign_unassigned_resources() */
 	if (is_pdc_pat()) {
@@ -1533,7 +1542,6 @@ lba_driver_probe(struct parisc_device *dev)
 	}
 	pci_enable_bridges(lba_bus);
 
-
 	/*
 	** Once PCI register ops has walked the bus, access to config
 	** space is restricted. Avoids master aborts on config cycles.
@@ -1543,6 +1551,11 @@ lba_driver_probe(struct parisc_device *dev)
 		lba_dev->flags |= LBA_FLAG_SKIP_PROBE;
 	}
 
+	if (lba_bus) {
+		lba_next_bus = lba_bus->subordinate + 1;
+		pci_bus_add_devices(lba_bus);
+	}
+
 	/* Whew! Finally done! Tell services we got this one covered. */
 	return 0;
 }
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index f9f9a5f1bbd..13a64bc081b 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -370,7 +370,7 @@ pdcspath_layer_read(struct pdcspath_entry *entry, char *buf)
 	if (!i)	/* entry is not ready */
 		return -ENODATA;
 	
-	for (i = 0; devpath->layers[i] && (likely(i < 6)); i++)
+	for (i = 0; i < 6 && devpath->layers[i]; i++)
 		out += sprintf(out, "%u ", devpath->layers[i]);
 
 	out += sprintf(out, "\n");
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index d46dd57450a..123d8fe3427 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -2057,6 +2057,7 @@ void sba_directed_lmmio(struct parisc_device *pci_hba, struct resource *r)
 		r->start = (base & ~1UL) | PCI_F_EXTEND;
 		size = ~ READ_REG32(reg + LMMIO_DIRECT0_MASK);
 		r->end = r->start + size;
+		r->flags = IORESOURCE_MEM;
 	}
 }
 
@@ -2093,4 +2094,5 @@ void sba_distributed_lmmio(struct parisc_device *pci_hba, struct resource *r )
 	size = (~READ_REG32(sba->sba_hpa + LMMIO_DIST_MASK)) / ROPES_PER_IOC;
 	r->start += rope * (size + 1);	/* adjust base for this rope */
 	r->end = r->start + size;
+	r->flags = IORESOURCE_MEM;
 }
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 33e5ade774c..675f04e6597 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -325,7 +325,7 @@ static unsigned int superio_startup_irq(unsigned int irq)
 	return 0;
 }
 
-static struct hw_interrupt_type superio_interrupt_type = {
+static struct irq_chip superio_interrupt_type = {
 	.typename =	SUPERIO,
 	.startup =	superio_startup_irq,
 	.shutdown =	superio_disable_irq,
@@ -434,8 +434,8 @@ static void __init superio_parport_init(void)
 			0 /*base_hi*/,
 			PAR_IRQ, 
 			PARPORT_DMA_NONE /* dma */,
-			NULL /*struct pci_dev* */),
-			0 /* shared irq flags */ )
+			NULL /*struct pci_dev* */,
+			0 /* shared irq flags */))
 
 		printk(KERN_WARNING PFX "Probing parallel port failed.\n");
 #endif	/* CONFIG_PARPORT_PC */
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 1032d5fdbd4..2597145a066 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2907,6 +2907,7 @@ enum parport_pc_pci_cards {
 	netmos_9755,
 	netmos_9805,
 	netmos_9815,
+	netmos_9901,
 	quatech_sppxp100,
 };
 
@@ -2987,7 +2988,7 @@ static struct parport_pc_pci {
 	/* netmos_9755 */               { 2, { { 0, 1 }, { 2, 3 },} },
 	/* netmos_9805 */               { 1, { { 0, -1 }, } },
 	/* netmos_9815 */               { 2, { { 0, -1 }, { 2, -1 }, } },
-
+	/* netmos_9901 */               { 1, { { 0, -1 }, } },
 	/* quatech_sppxp100 */		{ 1, { { 0, 1 }, } },
 };
 
@@ -3089,6 +3090,8 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9805 },
 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9815,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
+	  0xA000, 0x2000, 0, 0, netmos_9901 },
 	/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
 	{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index a5b9f6ae507..d703e73fffa 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -32,7 +32,6 @@
 #include <linux/pci_hotplug.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/smp_lock.h>
 #include <asm/atomic.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 2fa47af992a..0ff689afa75 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -34,7 +34,6 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/wait.h>
-#include <linux/smp_lock.h>
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
 #include <linux/kthread.h>
diff --git a/drivers/pci/hotplug/cpqphp_sysfs.c b/drivers/pci/hotplug/cpqphp_sysfs.c
index 8450f4a6568..e6089bdb6e5 100644
--- a/drivers/pci/hotplug/cpqphp_sysfs.c
+++ b/drivers/pci/hotplug/cpqphp_sysfs.c
@@ -33,6 +33,7 @@
 #include <linux/workqueue.h>
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
+#include <linux/smp_lock.h>
 #include <linux/debugfs.h>
 #include "cpqphp.h"
 
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 844580489d4..5c5043f239c 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -555,6 +555,8 @@ static struct hotplug_slot *get_slot_from_name (const char *name)
  * @slot: pointer to the &struct hotplug_slot to register
  * @devnr: device number
  * @name: name registered with kobject core
+ * @owner: caller module owner
+ * @mod_name: caller module name
  *
  * Registers a hotplug slot with the pci hotplug subsystem, which will allow
  * userspace interaction to the slot.
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index ff4034502d2..8aab8edf123 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -30,7 +30,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/smp_lock.h>
 #include <linux/pci.h>
 #include <linux/workqueue.h>
 #include "../pci.h"
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index a4494d78e7c..8aebe1e9d3d 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -90,11 +90,10 @@ static struct hotplug_slot_ops sn_hotplug_slot_ops = {
 
 static DEFINE_MUTEX(sn_hotplug_mutex);
 
-static ssize_t path_show (struct hotplug_slot *bss_hotplug_slot,
-	       		  char *buf)
+static ssize_t path_show(struct pci_slot *pci_slot, char *buf)
 {
 	int retval = -ENOENT;
-	struct slot *slot = bss_hotplug_slot->private;
+	struct slot *slot = pci_slot->hotplug->private;
 
 	if (!slot)
 		return retval;
@@ -103,7 +102,7 @@ static ssize_t path_show (struct hotplug_slot *bss_hotplug_slot,
 	return retval;
 }
 
-static struct hotplug_slot_attribute sn_slot_path_attr = __ATTR_RO(path);
+static struct pci_slot_attribute sn_slot_path_attr = __ATTR_RO(path);
 
 static int sn_pci_slot_valid(struct pci_bus *pci_bus, int device)
 {
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index e53eacd75c8..2314ad7ee5f 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -39,7 +39,6 @@
 #include <linux/sysdev.h>
 #include <asm/cacheflush.h>
 #include <asm/iommu.h>
-#include <asm/e820.h>
 #include "pci.h"
 
 #define ROOT_SIZE		VTD_PAGE_SIZE
@@ -57,14 +56,32 @@
 #define MAX_AGAW_WIDTH 64
 
 #define DOMAIN_MAX_ADDR(gaw) ((((u64)1) << gaw) - 1)
+#define DOMAIN_MAX_PFN(gaw)  ((((u64)1) << (gaw-VTD_PAGE_SHIFT)) - 1)
 
 #define IOVA_PFN(addr)		((addr) >> PAGE_SHIFT)
 #define DMA_32BIT_PFN		IOVA_PFN(DMA_BIT_MASK(32))
 #define DMA_64BIT_PFN		IOVA_PFN(DMA_BIT_MASK(64))
 
-#ifndef PHYSICAL_PAGE_MASK
-#define PHYSICAL_PAGE_MASK PAGE_MASK
-#endif
+
+/* VT-d pages must always be _smaller_ than MM pages. Otherwise things
+   are never going to work. */
+static inline unsigned long dma_to_mm_pfn(unsigned long dma_pfn)
+{
+	return dma_pfn >> (PAGE_SHIFT - VTD_PAGE_SHIFT);
+}
+
+static inline unsigned long mm_to_dma_pfn(unsigned long mm_pfn)
+{
+	return mm_pfn << (PAGE_SHIFT - VTD_PAGE_SHIFT);
+}
+static inline unsigned long page_to_dma_pfn(struct page *pg)
+{
+	return mm_to_dma_pfn(page_to_pfn(pg));
+}
+static inline unsigned long virt_to_dma_pfn(void *p)
+{
+	return page_to_dma_pfn(virt_to_page(p));
+}
 
 /* global iommu list, set NULL for ignored DMAR units */
 static struct intel_iommu **g_iommus;
@@ -205,12 +222,17 @@ static inline void dma_set_pte_prot(struct dma_pte *pte, unsigned long prot)
 
 static inline u64 dma_pte_addr(struct dma_pte *pte)
 {
-	return (pte->val & VTD_PAGE_MASK);
+#ifdef CONFIG_64BIT
+	return pte->val & VTD_PAGE_MASK;
+#else
+	/* Must have a full atomic 64-bit read */
+	return  __cmpxchg64(pte, 0ULL, 0ULL) & VTD_PAGE_MASK;
+#endif
 }
 
-static inline void dma_set_pte_addr(struct dma_pte *pte, u64 addr)
+static inline void dma_set_pte_pfn(struct dma_pte *pte, unsigned long pfn)
 {
-	pte->val |= (addr & VTD_PAGE_MASK);
+	pte->val |= (uint64_t)pfn << VTD_PAGE_SHIFT;
 }
 
 static inline bool dma_pte_present(struct dma_pte *pte)
@@ -218,6 +240,11 @@ static inline bool dma_pte_present(struct dma_pte *pte)
 	return (pte->val & 3) != 0;
 }
 
+static inline int first_pte_in_page(struct dma_pte *pte)
+{
+	return !((unsigned long)pte & ~VTD_PAGE_MASK);
+}
+
 /*
  * This domain is a statically identity mapping domain.
  *	1. This domain creats a static 1:1 mapping to all usable memory.
@@ -245,7 +272,6 @@ struct dmar_domain {
 	struct iova_domain iovad;	/* iova's that belong to this domain */
 
 	struct dma_pte	*pgd;		/* virtual address */
-	spinlock_t	mapping_lock;	/* page table lock */
 	int		gaw;		/* max guest address width */
 
 	/* adjusted guest address width, 0 is level 2 30-bit */
@@ -649,80 +675,78 @@ static inline int width_to_agaw(int width)
 
 static inline unsigned int level_to_offset_bits(int level)
 {
-	return (12 + (level - 1) * LEVEL_STRIDE);
+	return (level - 1) * LEVEL_STRIDE;
 }
 
-static inline int address_level_offset(u64 addr, int level)
+static inline int pfn_level_offset(unsigned long pfn, int level)
 {
-	return ((addr >> level_to_offset_bits(level)) & LEVEL_MASK);
+	return (pfn >> level_to_offset_bits(level)) & LEVEL_MASK;
 }
 
-static inline u64 level_mask(int level)
+static inline unsigned long level_mask(int level)
 {
-	return ((u64)-1 << level_to_offset_bits(level));
+	return -1UL << level_to_offset_bits(level);
 }
 
-static inline u64 level_size(int level)
+static inline unsigned long level_size(int level)
 {
-	return ((u64)1 << level_to_offset_bits(level));
+	return 1UL << level_to_offset_bits(level);
 }
 
-static inline u64 align_to_level(u64 addr, int level)
+static inline unsigned long align_to_level(unsigned long pfn, int level)
 {
-	return ((addr + level_size(level) - 1) & level_mask(level));
+	return (pfn + level_size(level) - 1) & level_mask(level);
 }
 
-static struct dma_pte * addr_to_dma_pte(struct dmar_domain *domain, u64 addr)
+static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
+				      unsigned long pfn)
 {
-	int addr_width = agaw_to_width(domain->agaw);
+	int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
 	struct dma_pte *parent, *pte = NULL;
 	int level = agaw_to_level(domain->agaw);
 	int offset;
-	unsigned long flags;
 
 	BUG_ON(!domain->pgd);
-
-	addr &= (((u64)1) << addr_width) - 1;
+	BUG_ON(addr_width < BITS_PER_LONG && pfn >> addr_width);
 	parent = domain->pgd;
 
-	spin_lock_irqsave(&domain->mapping_lock, flags);
 	while (level > 0) {
 		void *tmp_page;
 
-		offset = address_level_offset(addr, level);
+		offset = pfn_level_offset(pfn, level);
 		pte = &parent[offset];
 		if (level == 1)
 			break;
 
 		if (!dma_pte_present(pte)) {
+			uint64_t pteval;
+
 			tmp_page = alloc_pgtable_page();
 
-			if (!tmp_page) {
-				spin_unlock_irqrestore(&domain->mapping_lock,
-					flags);
+			if (!tmp_page)
 				return NULL;
+
+			domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE);
+			pteval = (virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
+			if (cmpxchg64(&pte->val, 0ULL, pteval)) {
+				/* Someone else set it while we were thinking; use theirs. */
+				free_pgtable_page(tmp_page);
+			} else {
+				dma_pte_addr(pte);
+				domain_flush_cache(domain, pte, sizeof(*pte));
 			}
-			domain_flush_cache(domain, tmp_page, PAGE_SIZE);
-			dma_set_pte_addr(pte, virt_to_phys(tmp_page));
-			/*
-			 * high level table always sets r/w, last level page
-			 * table control read/write
-			 */
-			dma_set_pte_readable(pte);
-			dma_set_pte_writable(pte);
-			domain_flush_cache(domain, pte, sizeof(*pte));
 		}
 		parent = phys_to_virt(dma_pte_addr(pte));
 		level--;
 	}
 
-	spin_unlock_irqrestore(&domain->mapping_lock, flags);
 	return pte;
 }
 
 /* return address's pte at specific level */
-static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr,
-		int level)
+static struct dma_pte *dma_pfn_level_pte(struct dmar_domain *domain,
+					 unsigned long pfn,
+					 int level)
 {
 	struct dma_pte *parent, *pte = NULL;
 	int total = agaw_to_level(domain->agaw);
@@ -730,7 +754,7 @@ static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr,
 
 	parent = domain->pgd;
 	while (level <= total) {
-		offset = address_level_offset(addr, total);
+		offset = pfn_level_offset(pfn, total);
 		pte = &parent[offset];
 		if (level == total)
 			return pte;
@@ -743,74 +767,82 @@ static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr,
 	return NULL;
 }
 
-/* clear one page's page table */
-static void dma_pte_clear_one(struct dmar_domain *domain, u64 addr)
-{
-	struct dma_pte *pte = NULL;
-
-	/* get last level pte */
-	pte = dma_addr_level_pte(domain, addr, 1);
-
-	if (pte) {
-		dma_clear_pte(pte);
-		domain_flush_cache(domain, pte, sizeof(*pte));
-	}
-}
-
 /* clear last level pte, a tlb flush should be followed */
-static void dma_pte_clear_range(struct dmar_domain *domain, u64 start, u64 end)
+static void dma_pte_clear_range(struct dmar_domain *domain,
+				unsigned long start_pfn,
+				unsigned long last_pfn)
 {
-	int addr_width = agaw_to_width(domain->agaw);
-	int npages;
+	int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
+	struct dma_pte *first_pte, *pte;
 
-	start &= (((u64)1) << addr_width) - 1;
-	end &= (((u64)1) << addr_width) - 1;
-	/* in case it's partial page */
-	start &= PAGE_MASK;
-	end = PAGE_ALIGN(end);
-	npages = (end - start) / VTD_PAGE_SIZE;
+	BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width);
+	BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width);
 
-	/* we don't need lock here, nobody else touches the iova range */
-	while (npages--) {
-		dma_pte_clear_one(domain, start);
-		start += VTD_PAGE_SIZE;
+	/* we don't need lock here; nobody else touches the iova range */
+	while (start_pfn <= last_pfn) {
+		first_pte = pte = dma_pfn_level_pte(domain, start_pfn, 1);
+		if (!pte) {
+			start_pfn = align_to_level(start_pfn + 1, 2);
+			continue;
+		}
+		do { 
+			dma_clear_pte(pte);
+			start_pfn++;
+			pte++;
+		} while (start_pfn <= last_pfn && !first_pte_in_page(pte));
+
+		domain_flush_cache(domain, first_pte,
+				   (void *)pte - (void *)first_pte);
 	}
 }
 
 /* free page table pages. last level pte should already be cleared */
 static void dma_pte_free_pagetable(struct dmar_domain *domain,
-	u64 start, u64 end)
+				   unsigned long start_pfn,
+				   unsigned long last_pfn)
 {
-	int addr_width = agaw_to_width(domain->agaw);
-	struct dma_pte *pte;
+	int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
+	struct dma_pte *first_pte, *pte;
 	int total = agaw_to_level(domain->agaw);
 	int level;
-	u64 tmp;
+	unsigned long tmp;
 
-	start &= (((u64)1) << addr_width) - 1;
-	end &= (((u64)1) << addr_width) - 1;
+	BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width);
+	BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width);
 
-	/* we don't need lock here, nobody else touches the iova range */
+	/* We don't need lock here; nobody else touches the iova range */
 	level = 2;
 	while (level <= total) {
-		tmp = align_to_level(start, level);
-		if (tmp >= end || (tmp + level_size(level) > end))
+		tmp = align_to_level(start_pfn, level);
+
+		/* If we can't even clear one PTE at this level, we're done */
+		if (tmp + level_size(level) - 1 > last_pfn)
 			return;
 
-		while (tmp < end) {
-			pte = dma_addr_level_pte(domain, tmp, level);
-			if (pte) {
-				free_pgtable_page(
-					phys_to_virt(dma_pte_addr(pte)));
-				dma_clear_pte(pte);
-				domain_flush_cache(domain, pte, sizeof(*pte));
+		while (tmp + level_size(level) - 1 <= last_pfn) {
+			first_pte = pte = dma_pfn_level_pte(domain, tmp, level);
+			if (!pte) {
+				tmp = align_to_level(tmp + 1, level + 1);
+				continue;
 			}
-			tmp += level_size(level);
+			do {
+				if (dma_pte_present(pte)) {
+					free_pgtable_page(phys_to_virt(dma_pte_addr(pte)));
+					dma_clear_pte(pte);
+				}
+				pte++;
+				tmp += level_size(level);
+			} while (!first_pte_in_page(pte) &&
+				 tmp + level_size(level) - 1 <= last_pfn);
+
+			domain_flush_cache(domain, first_pte,
+					   (void *)pte - (void *)first_pte);
+			
 		}
 		level++;
 	}
 	/* free pgd */
-	if (start == 0 && end >= ((((u64)1) << addr_width) - 1)) {
+	if (start_pfn == 0 && last_pfn == DOMAIN_MAX_PFN(domain->gaw)) {
 		free_pgtable_page(domain->pgd);
 		domain->pgd = NULL;
 	}
@@ -1036,11 +1068,11 @@ static void iommu_flush_dev_iotlb(struct dmar_domain *domain,
 }
 
 static void iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did,
-				  u64 addr, unsigned int pages)
+				  unsigned long pfn, unsigned int pages)
 {
 	unsigned int mask = ilog2(__roundup_pow_of_two(pages));
+	uint64_t addr = (uint64_t)pfn << VTD_PAGE_SHIFT;
 
-	BUG_ON(addr & (~VTD_PAGE_MASK));
 	BUG_ON(pages == 0);
 
 	/*
@@ -1055,7 +1087,12 @@ static void iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did,
 	else
 		iommu->flush.flush_iotlb(iommu, did, addr, mask,
 						DMA_TLB_PSI_FLUSH);
-	if (did)
+
+	/*
+	 * In caching mode, domain ID 0 is reserved for non-present to present
+	 * mapping flush. Device IOTLB doesn't need to be flushed in this case.
+	 */
+	if (!cap_caching_mode(iommu->cap) || did)
 		iommu_flush_dev_iotlb(iommu->domains[did], addr, mask);
 }
 
@@ -1280,7 +1317,6 @@ static void dmar_init_reserved_ranges(void)
 	struct pci_dev *pdev = NULL;
 	struct iova *iova;
 	int i;
-	u64 addr, size;
 
 	init_iova_domain(&reserved_iova_list, DMA_32BIT_PFN);
 
@@ -1303,12 +1339,9 @@ static void dmar_init_reserved_ranges(void)
 			r = &pdev->resource[i];
 			if (!r->flags || !(r->flags & IORESOURCE_MEM))
 				continue;
-			addr = r->start;
-			addr &= PHYSICAL_PAGE_MASK;
-			size = r->end - addr;
-			size = PAGE_ALIGN(size);
-			iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr),
-				IOVA_PFN(size + addr) - 1);
+			iova = reserve_iova(&reserved_iova_list,
+					    IOVA_PFN(r->start),
+					    IOVA_PFN(r->end));
 			if (!iova)
 				printk(KERN_ERR "Reserve iova failed\n");
 		}
@@ -1342,7 +1375,6 @@ static int domain_init(struct dmar_domain *domain, int guest_width)
 	unsigned long sagaw;
 
 	init_iova_domain(&domain->iovad, DMA_32BIT_PFN);
-	spin_lock_init(&domain->mapping_lock);
 	spin_lock_init(&domain->iommu_lock);
 
 	domain_reserve_special_ranges(domain);
@@ -1389,7 +1421,6 @@ static void domain_exit(struct dmar_domain *domain)
 {
 	struct dmar_drhd_unit *drhd;
 	struct intel_iommu *iommu;
-	u64 end;
 
 	/* Domain 0 is reserved, so dont process it */
 	if (!domain)
@@ -1398,14 +1429,12 @@ static void domain_exit(struct dmar_domain *domain)
 	domain_remove_dev_info(domain);
 	/* destroy iovas */
 	put_iova_domain(&domain->iovad);
-	end = DOMAIN_MAX_ADDR(domain->gaw);
-	end = end & (~PAGE_MASK);
 
 	/* clear ptes */
-	dma_pte_clear_range(domain, 0, end);
+	dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
 
 	/* free page tables */
-	dma_pte_free_pagetable(domain, 0, end);
+	dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
 
 	for_each_active_iommu(iommu, drhd)
 		if (test_bit(iommu->seq_id, &domain->iommu_bmp))
@@ -1476,7 +1505,6 @@ static int domain_context_mapping_one(struct dmar_domain *domain, int segment,
 			}
 
 			set_bit(num, iommu->domain_ids);
-			set_bit(iommu->seq_id, &domain->iommu_bmp);
 			iommu->domains[num] = domain;
 			id = num;
 		}
@@ -1619,42 +1647,94 @@ static int domain_context_mapped(struct pci_dev *pdev)
 					     tmp->devfn);
 }
 
-static int
-domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova,
-			u64 hpa, size_t size, int prot)
+/* Returns a number of VTD pages, but aligned to MM page size */
+static inline unsigned long aligned_nrpages(unsigned long host_addr,
+					    size_t size)
 {
-	u64 start_pfn, end_pfn;
-	struct dma_pte *pte;
-	int index;
-	int addr_width = agaw_to_width(domain->agaw);
+	host_addr &= ~PAGE_MASK;
+	return PAGE_ALIGN(host_addr + size) >> VTD_PAGE_SHIFT;
+}
 
-	hpa &= (((u64)1) << addr_width) - 1;
+static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
+			    struct scatterlist *sg, unsigned long phys_pfn,
+			    unsigned long nr_pages, int prot)
+{
+	struct dma_pte *first_pte = NULL, *pte = NULL;
+	phys_addr_t uninitialized_var(pteval);
+	int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
+	unsigned long sg_res;
+
+	BUG_ON(addr_width < BITS_PER_LONG && (iov_pfn + nr_pages - 1) >> addr_width);
 
 	if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0)
 		return -EINVAL;
-	iova &= PAGE_MASK;
-	start_pfn = ((u64)hpa) >> VTD_PAGE_SHIFT;
-	end_pfn = (VTD_PAGE_ALIGN(((u64)hpa) + size)) >> VTD_PAGE_SHIFT;
-	index = 0;
-	while (start_pfn < end_pfn) {
-		pte = addr_to_dma_pte(domain, iova + VTD_PAGE_SIZE * index);
-		if (!pte)
-			return -ENOMEM;
+
+	prot &= DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP;
+
+	if (sg)
+		sg_res = 0;
+	else {
+		sg_res = nr_pages + 1;
+		pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | prot;
+	}
+
+	while (nr_pages--) {
+		uint64_t tmp;
+
+		if (!sg_res) {
+			sg_res = aligned_nrpages(sg->offset, sg->length);
+			sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + sg->offset;
+			sg->dma_length = sg->length;
+			pteval = page_to_phys(sg_page(sg)) | prot;
+		}
+		if (!pte) {
+			first_pte = pte = pfn_to_dma_pte(domain, iov_pfn);
+			if (!pte)
+				return -ENOMEM;
+		}
 		/* We don't need lock here, nobody else
 		 * touches the iova range
 		 */
-		BUG_ON(dma_pte_addr(pte));
-		dma_set_pte_addr(pte, start_pfn << VTD_PAGE_SHIFT);
-		dma_set_pte_prot(pte, prot);
-		if (prot & DMA_PTE_SNP)
-			dma_set_pte_snp(pte);
-		domain_flush_cache(domain, pte, sizeof(*pte));
-		start_pfn++;
-		index++;
+		tmp = cmpxchg64_local(&pte->val, 0ULL, pteval);
+		if (tmp) {
+			static int dumps = 5;
+			printk(KERN_CRIT "ERROR: DMA PTE for vPFN 0x%lx already set (to %llx not %llx)\n",
+			       iov_pfn, tmp, (unsigned long long)pteval);
+			if (dumps) {
+				dumps--;
+				debug_dma_dump_mappings(NULL);
+			}
+			WARN_ON(1);
+		}
+		pte++;
+		if (!nr_pages || first_pte_in_page(pte)) {
+			domain_flush_cache(domain, first_pte,
+					   (void *)pte - (void *)first_pte);
+			pte = NULL;
+		}
+		iov_pfn++;
+		pteval += VTD_PAGE_SIZE;
+		sg_res--;
+		if (!sg_res)
+			sg = sg_next(sg);
 	}
 	return 0;
 }
 
+static inline int domain_sg_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
+				    struct scatterlist *sg, unsigned long nr_pages,
+				    int prot)
+{
+	return __domain_mapping(domain, iov_pfn, sg, 0, nr_pages, prot);
+}
+
+static inline int domain_pfn_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
+				     unsigned long phys_pfn, unsigned long nr_pages,
+				     int prot)
+{
+	return __domain_mapping(domain, iov_pfn, NULL, phys_pfn, nr_pages, prot);
+}
+
 static void iommu_detach_dev(struct intel_iommu *iommu, u8 bus, u8 devfn)
 {
 	if (!iommu)
@@ -1845,58 +1925,61 @@ error:
 
 static int iommu_identity_mapping;
 
+static int iommu_domain_identity_map(struct dmar_domain *domain,
+				     unsigned long long start,
+				     unsigned long long end)
+{
+	unsigned long first_vpfn = start >> VTD_PAGE_SHIFT;
+	unsigned long last_vpfn = end >> VTD_PAGE_SHIFT;
+
+	if (!reserve_iova(&domain->iovad, dma_to_mm_pfn(first_vpfn),
+			  dma_to_mm_pfn(last_vpfn))) {
+		printk(KERN_ERR "IOMMU: reserve iova failed\n");
+		return -ENOMEM;
+	}
+
+	pr_debug("Mapping reserved region %llx-%llx for domain %d\n",
+		 start, end, domain->id);
+	/*
+	 * RMRR range might have overlap with physical memory range,
+	 * clear it first
+	 */
+	dma_pte_clear_range(domain, first_vpfn, last_vpfn);
+
+	return domain_pfn_mapping(domain, first_vpfn, first_vpfn,
+				  last_vpfn - first_vpfn + 1,
+				  DMA_PTE_READ|DMA_PTE_WRITE);
+}
+
 static int iommu_prepare_identity_map(struct pci_dev *pdev,
 				      unsigned long long start,
 				      unsigned long long end)
 {
 	struct dmar_domain *domain;
-	unsigned long size;
-	unsigned long long base;
 	int ret;
 
 	printk(KERN_INFO
-		"IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n",
-		pci_name(pdev), start, end);
-	if (iommu_identity_mapping)
-		domain = si_domain;
-	else
-		/* page table init */
-		domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH);
+	       "IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n",
+	       pci_name(pdev), start, end);
+
+	domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH);
 	if (!domain)
 		return -ENOMEM;
 
-	/* The address might not be aligned */
-	base = start & PAGE_MASK;
-	size = end - base;
-	size = PAGE_ALIGN(size);
-	if (!reserve_iova(&domain->iovad, IOVA_PFN(base),
-			IOVA_PFN(base + size) - 1)) {
-		printk(KERN_ERR "IOMMU: reserve iova failed\n");
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	pr_debug("Mapping reserved region %lx@%llx for %s\n",
-		size, base, pci_name(pdev));
-	/*
-	 * RMRR range might have overlap with physical memory range,
-	 * clear it first
-	 */
-	dma_pte_clear_range(domain, base, base + size);
-
-	ret = domain_page_mapping(domain, base, base, size,
-		DMA_PTE_READ|DMA_PTE_WRITE);
+	ret = iommu_domain_identity_map(domain, start, end);
 	if (ret)
 		goto error;
 
 	/* context entry init */
 	ret = domain_context_mapping(domain, pdev, CONTEXT_TT_MULTI_LEVEL);
-	if (!ret)
-		return 0;
-error:
+	if (ret)
+		goto error;
+
+	return 0;
+
+ error:
 	domain_exit(domain);
 	return ret;
-
 }
 
 static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr,
@@ -1908,64 +1991,6 @@ static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr,
 		rmrr->end_address + 1);
 }
 
-#ifdef CONFIG_DMAR_GFX_WA
-struct iommu_prepare_data {
-	struct pci_dev *pdev;
-	int ret;
-};
-
-static int __init iommu_prepare_work_fn(unsigned long start_pfn,
-					 unsigned long end_pfn, void *datax)
-{
-	struct iommu_prepare_data *data;
-
-	data = (struct iommu_prepare_data *)datax;
-
-	data->ret = iommu_prepare_identity_map(data->pdev,
-				start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
-	return data->ret;
-
-}
-
-static int __init iommu_prepare_with_active_regions(struct pci_dev *pdev)
-{
-	int nid;
-	struct iommu_prepare_data data;
-
-	data.pdev = pdev;
-	data.ret = 0;
-
-	for_each_online_node(nid) {
-		work_with_active_regions(nid, iommu_prepare_work_fn, &data);
-		if (data.ret)
-			return data.ret;
-	}
-	return data.ret;
-}
-
-static void __init iommu_prepare_gfx_mapping(void)
-{
-	struct pci_dev *pdev = NULL;
-	int ret;
-
-	for_each_pci_dev(pdev) {
-		if (pdev->dev.archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO ||
-				!IS_GFX_DEVICE(pdev))
-			continue;
-		printk(KERN_INFO "IOMMU: gfx device %s 1-1 mapping\n",
-			pci_name(pdev));
-		ret = iommu_prepare_with_active_regions(pdev);
-		if (ret)
-			printk(KERN_ERR "IOMMU: mapping reserved region failed\n");
-	}
-}
-#else /* !CONFIG_DMAR_GFX_WA */
-static inline void iommu_prepare_gfx_mapping(void)
-{
-	return;
-}
-#endif
-
 #ifdef CONFIG_DMAR_FLOPPY_WA
 static inline void iommu_prepare_isa(void)
 {
@@ -1976,12 +2001,12 @@ static inline void iommu_prepare_isa(void)
 	if (!pdev)
 		return;
 
-	printk(KERN_INFO "IOMMU: Prepare 0-16M unity mapping for LPC\n");
+	printk(KERN_INFO "IOMMU: Prepare 0-16MiB unity mapping for LPC\n");
 	ret = iommu_prepare_identity_map(pdev, 0, 16*1024*1024);
 
 	if (ret)
-		printk(KERN_ERR "IOMMU: Failed to create 0-64M identity map, "
-			"floppy might not work\n");
+		printk(KERN_ERR "IOMMU: Failed to create 0-16MiB identity map; "
+		       "floppy might not work\n");
 
 }
 #else
@@ -2009,16 +2034,30 @@ static int __init init_context_pass_through(void)
 }
 
 static int md_domain_init(struct dmar_domain *domain, int guest_width);
+
+static int __init si_domain_work_fn(unsigned long start_pfn,
+				    unsigned long end_pfn, void *datax)
+{
+	int *ret = datax;
+
+	*ret = iommu_domain_identity_map(si_domain,
+					 (uint64_t)start_pfn << PAGE_SHIFT,
+					 (uint64_t)end_pfn << PAGE_SHIFT);
+	return *ret;
+
+}
+
 static int si_domain_init(void)
 {
 	struct dmar_drhd_unit *drhd;
 	struct intel_iommu *iommu;
-	int ret = 0;
+	int nid, ret = 0;
 
 	si_domain = alloc_domain();
 	if (!si_domain)
 		return -EFAULT;
 
+	pr_debug("Identity mapping domain is domain %d\n", si_domain->id);
 
 	for_each_active_iommu(iommu, drhd) {
 		ret = iommu_attach_domain(si_domain, iommu);
@@ -2035,6 +2074,12 @@ static int si_domain_init(void)
 
 	si_domain->flags = DOMAIN_FLAG_STATIC_IDENTITY;
 
+	for_each_online_node(nid) {
+		work_with_active_regions(nid, si_domain_work_fn, &ret);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
@@ -2079,9 +2124,49 @@ static int domain_add_dev_info(struct dmar_domain *domain,
 	return 0;
 }
 
+static int iommu_should_identity_map(struct pci_dev *pdev, int startup)
+{
+	if (iommu_identity_mapping == 2)
+		return IS_GFX_DEVICE(pdev);
+
+	/*
+	 * We want to start off with all devices in the 1:1 domain, and
+	 * take them out later if we find they can't access all of memory.
+	 *
+	 * However, we can't do this for PCI devices behind bridges,
+	 * because all PCI devices behind the same bridge will end up
+	 * with the same source-id on their transactions.
+	 *
+	 * Practically speaking, we can't change things around for these
+	 * devices at run-time, because we can't be sure there'll be no
+	 * DMA transactions in flight for any of their siblings.
+	 * 
+	 * So PCI devices (unless they're on the root bus) as well as
+	 * their parent PCI-PCI or PCIe-PCI bridges must be left _out_ of
+	 * the 1:1 domain, just in _case_ one of their siblings turns out
+	 * not to be able to map all of memory.
+	 */
+	if (!pdev->is_pcie) {
+		if (!pci_is_root_bus(pdev->bus))
+			return 0;
+		if (pdev->class >> 8 == PCI_CLASS_BRIDGE_PCI)
+			return 0;
+	} else if (pdev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE)
+		return 0;
+
+	/* 
+	 * At boot time, we don't yet know if devices will be 64-bit capable.
+	 * Assume that they will -- if they turn out not to be, then we can 
+	 * take them out of the 1:1 domain later.
+	 */
+	if (!startup)
+		return pdev->dma_mask > DMA_BIT_MASK(32);
+
+	return 1;
+}
+
 static int iommu_prepare_static_identity_mapping(void)
 {
-	int i;
 	struct pci_dev *pdev = NULL;
 	int ret;
 
@@ -2089,23 +2174,19 @@ static int iommu_prepare_static_identity_mapping(void)
 	if (ret)
 		return -EFAULT;
 
-	printk(KERN_INFO "IOMMU: Setting identity map:\n");
 	for_each_pci_dev(pdev) {
-		for (i = 0; i < e820.nr_map; i++) {
-			struct e820entry *ei = &e820.map[i];
-
-			if (ei->type == E820_RAM) {
-				ret = iommu_prepare_identity_map(pdev,
-					ei->addr, ei->addr + ei->size);
-				if (ret)  {
-					printk(KERN_INFO "1:1 mapping to one domain failed.\n");
-					return -EFAULT;
-				}
-			}
+		if (iommu_should_identity_map(pdev, 1)) {
+			printk(KERN_INFO "IOMMU: identity mapping for device %s\n",
+			       pci_name(pdev));
+
+			ret = domain_context_mapping(si_domain, pdev,
+						     CONTEXT_TT_MULTI_LEVEL);
+			if (ret)
+				return ret;
+			ret = domain_add_dev_info(si_domain, pdev);
+			if (ret)
+				return ret;
 		}
-		ret = domain_add_dev_info(si_domain, pdev);
-		if (ret)
-			return ret;
 	}
 
 	return 0;
@@ -2260,6 +2341,10 @@ int __init init_dmars(void)
 	 * identity mapping if iommu_identity_mapping is set.
 	 */
 	if (!iommu_pass_through) {
+#ifdef CONFIG_DMAR_BROKEN_GFX_WA
+		if (!iommu_identity_mapping)
+			iommu_identity_mapping = 2;
+#endif
 		if (iommu_identity_mapping)
 			iommu_prepare_static_identity_mapping();
 		/*
@@ -2293,8 +2378,6 @@ int __init init_dmars(void)
 			}
 		}
 
-		iommu_prepare_gfx_mapping();
-
 		iommu_prepare_isa();
 	}
 
@@ -2339,50 +2422,32 @@ error:
 	return ret;
 }
 
-static inline u64 aligned_size(u64 host_addr, size_t size)
-{
-	u64 addr;
-	addr = (host_addr & (~PAGE_MASK)) + size;
-	return PAGE_ALIGN(addr);
-}
-
-struct iova *
-iommu_alloc_iova(struct dmar_domain *domain, size_t size, u64 end)
-{
-	struct iova *piova;
-
-	/* Make sure it's in range */
-	end = min_t(u64, DOMAIN_MAX_ADDR(domain->gaw), end);
-	if (!size || (IOVA_START_ADDR + size > end))
-		return NULL;
-
-	piova = alloc_iova(&domain->iovad,
-			size >> PAGE_SHIFT, IOVA_PFN(end), 1);
-	return piova;
-}
-
-static struct iova *
-__intel_alloc_iova(struct device *dev, struct dmar_domain *domain,
-		   size_t size, u64 dma_mask)
+/* This takes a number of _MM_ pages, not VTD pages */
+static struct iova *intel_alloc_iova(struct device *dev,
+				     struct dmar_domain *domain,
+				     unsigned long nrpages, uint64_t dma_mask)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct iova *iova = NULL;
 
-	if (dma_mask <= DMA_BIT_MASK(32) || dmar_forcedac)
-		iova = iommu_alloc_iova(domain, size, dma_mask);
-	else {
+	/* Restrict dma_mask to the width that the iommu can handle */
+	dma_mask = min_t(uint64_t, DOMAIN_MAX_ADDR(domain->gaw), dma_mask);
+
+	if (!dmar_forcedac && dma_mask > DMA_BIT_MASK(32)) {
 		/*
 		 * First try to allocate an io virtual address in
 		 * DMA_BIT_MASK(32) and if that fails then try allocating
 		 * from higher range
 		 */
-		iova = iommu_alloc_iova(domain, size, DMA_BIT_MASK(32));
-		if (!iova)
-			iova = iommu_alloc_iova(domain, size, dma_mask);
-	}
-
-	if (!iova) {
-		printk(KERN_ERR"Allocating iova for %s failed", pci_name(pdev));
+		iova = alloc_iova(&domain->iovad, nrpages,
+				  IOVA_PFN(DMA_BIT_MASK(32)), 1);
+		if (iova)
+			return iova;
+	}
+	iova = alloc_iova(&domain->iovad, nrpages, IOVA_PFN(dma_mask), 1);
+	if (unlikely(!iova)) {
+		printk(KERN_ERR "Allocating %ld-page iova for %s failed",
+		       nrpages, pci_name(pdev));
 		return NULL;
 	}
 
@@ -2424,16 +2489,24 @@ static int iommu_dummy(struct pci_dev *pdev)
 }
 
 /* Check if the pdev needs to go through non-identity map and unmap process.*/
-static int iommu_no_mapping(struct pci_dev *pdev)
+static int iommu_no_mapping(struct device *dev)
 {
+	struct pci_dev *pdev;
 	int found;
 
+	if (unlikely(dev->bus != &pci_bus_type))
+		return 1;
+
+	pdev = to_pci_dev(dev);
+	if (iommu_dummy(pdev))
+		return 1;
+
 	if (!iommu_identity_mapping)
-		return iommu_dummy(pdev);
+		return 0;
 
 	found = identity_mapping(pdev);
 	if (found) {
-		if (pdev->dma_mask > DMA_BIT_MASK(32))
+		if (iommu_should_identity_map(pdev, 0))
 			return 1;
 		else {
 			/*
@@ -2450,9 +2523,12 @@ static int iommu_no_mapping(struct pci_dev *pdev)
 		 * In case of a detached 64 bit DMA device from vm, the device
 		 * is put into si_domain for identity mapping.
 		 */
-		if (pdev->dma_mask > DMA_BIT_MASK(32)) {
+		if (iommu_should_identity_map(pdev, 0)) {
 			int ret;
 			ret = domain_add_dev_info(si_domain, pdev);
+			if (ret)
+				return 0;
+			ret = domain_context_mapping(si_domain, pdev, CONTEXT_TT_MULTI_LEVEL);
 			if (!ret) {
 				printk(KERN_INFO "64bit %s uses identity mapping\n",
 				       pci_name(pdev));
@@ -2461,7 +2537,7 @@ static int iommu_no_mapping(struct pci_dev *pdev)
 		}
 	}
 
-	return iommu_dummy(pdev);
+	return 0;
 }
 
 static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
@@ -2474,10 +2550,11 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
 	int prot = 0;
 	int ret;
 	struct intel_iommu *iommu;
+	unsigned long paddr_pfn = paddr >> PAGE_SHIFT;
 
 	BUG_ON(dir == DMA_NONE);
 
-	if (iommu_no_mapping(pdev))
+	if (iommu_no_mapping(hwdev))
 		return paddr;
 
 	domain = get_valid_domain_for_dev(pdev);
@@ -2485,14 +2562,13 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
 		return 0;
 
 	iommu = domain_get_iommu(domain);
-	size = aligned_size((u64)paddr, size);
+	size = aligned_nrpages(paddr, size);
 
-	iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask);
+	iova = intel_alloc_iova(hwdev, domain, dma_to_mm_pfn(size),
+				pdev->dma_mask);
 	if (!iova)
 		goto error;
 
-	start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT;
-
 	/*
 	 * Check if DMAR supports zero-length reads on write only
 	 * mappings..
@@ -2508,20 +2584,20 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
 	 * might have two guest_addr mapping to the same host paddr, but this
 	 * is not a big problem
 	 */
-	ret = domain_page_mapping(domain, start_paddr,
-				  ((u64)paddr) & PHYSICAL_PAGE_MASK,
-				  size, prot);
+	ret = domain_pfn_mapping(domain, mm_to_dma_pfn(iova->pfn_lo),
+				 mm_to_dma_pfn(paddr_pfn), size, prot);
 	if (ret)
 		goto error;
 
 	/* it's a non-present to present mapping. Only flush if caching mode */
 	if (cap_caching_mode(iommu->cap))
-		iommu_flush_iotlb_psi(iommu, 0, start_paddr,
-				      size >> VTD_PAGE_SHIFT);
+		iommu_flush_iotlb_psi(iommu, 0, mm_to_dma_pfn(iova->pfn_lo), size);
 	else
 		iommu_flush_write_buffer(iommu);
 
-	return start_paddr + ((u64)paddr & (~PAGE_MASK));
+	start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT;
+	start_paddr += paddr & ~PAGE_MASK;
+	return start_paddr;
 
 error:
 	if (iova)
@@ -2614,11 +2690,11 @@ static void intel_unmap_page(struct device *dev, dma_addr_t dev_addr,
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct dmar_domain *domain;
-	unsigned long start_addr;
+	unsigned long start_pfn, last_pfn;
 	struct iova *iova;
 	struct intel_iommu *iommu;
 
-	if (iommu_no_mapping(pdev))
+	if (iommu_no_mapping(dev))
 		return;
 
 	domain = find_domain(pdev);
@@ -2627,22 +2703,25 @@ static void intel_unmap_page(struct device *dev, dma_addr_t dev_addr,
 	iommu = domain_get_iommu(domain);
 
 	iova = find_iova(&domain->iovad, IOVA_PFN(dev_addr));
-	if (!iova)
+	if (WARN_ONCE(!iova, "Driver unmaps unmatched page at PFN %llx\n",
+		      (unsigned long long)dev_addr))
 		return;
 
-	start_addr = iova->pfn_lo << PAGE_SHIFT;
-	size = aligned_size((u64)dev_addr, size);
+	start_pfn = mm_to_dma_pfn(iova->pfn_lo);
+	last_pfn = mm_to_dma_pfn(iova->pfn_hi + 1) - 1;
 
-	pr_debug("Device %s unmapping: %zx@%llx\n",
-		pci_name(pdev), size, (unsigned long long)start_addr);
+	pr_debug("Device %s unmapping: pfn %lx-%lx\n",
+		 pci_name(pdev), start_pfn, last_pfn);
 
 	/*  clear the whole page */
-	dma_pte_clear_range(domain, start_addr, start_addr + size);
+	dma_pte_clear_range(domain, start_pfn, last_pfn);
+
 	/* free page tables */
-	dma_pte_free_pagetable(domain, start_addr, start_addr + size);
+	dma_pte_free_pagetable(domain, start_pfn, last_pfn);
+
 	if (intel_iommu_strict) {
-		iommu_flush_iotlb_psi(iommu, domain->id, start_addr,
-				      size >> VTD_PAGE_SHIFT);
+		iommu_flush_iotlb_psi(iommu, domain->id, start_pfn,
+				      last_pfn - start_pfn + 1);
 		/* free iova */
 		__free_iova(&domain->iovad, iova);
 	} else {
@@ -2700,17 +2779,13 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist,
 			   int nelems, enum dma_data_direction dir,
 			   struct dma_attrs *attrs)
 {
-	int i;
 	struct pci_dev *pdev = to_pci_dev(hwdev);
 	struct dmar_domain *domain;
-	unsigned long start_addr;
+	unsigned long start_pfn, last_pfn;
 	struct iova *iova;
-	size_t size = 0;
-	phys_addr_t addr;
-	struct scatterlist *sg;
 	struct intel_iommu *iommu;
 
-	if (iommu_no_mapping(pdev))
+	if (iommu_no_mapping(hwdev))
 		return;
 
 	domain = find_domain(pdev);
@@ -2719,22 +2794,21 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist,
 	iommu = domain_get_iommu(domain);
 
 	iova = find_iova(&domain->iovad, IOVA_PFN(sglist[0].dma_address));
-	if (!iova)
+	if (WARN_ONCE(!iova, "Driver unmaps unmatched sglist at PFN %llx\n",
+		      (unsigned long long)sglist[0].dma_address))
 		return;
-	for_each_sg(sglist, sg, nelems, i) {
-		addr = page_to_phys(sg_page(sg)) + sg->offset;
-		size += aligned_size((u64)addr, sg->length);
-	}
 
-	start_addr = iova->pfn_lo << PAGE_SHIFT;
+	start_pfn = mm_to_dma_pfn(iova->pfn_lo);
+	last_pfn = mm_to_dma_pfn(iova->pfn_hi + 1) - 1;
 
 	/*  clear the whole page */
-	dma_pte_clear_range(domain, start_addr, start_addr + size);
+	dma_pte_clear_range(domain, start_pfn, last_pfn);
+
 	/* free page tables */
-	dma_pte_free_pagetable(domain, start_addr, start_addr + size);
+	dma_pte_free_pagetable(domain, start_pfn, last_pfn);
 
-	iommu_flush_iotlb_psi(iommu, domain->id, start_addr,
-			      size >> VTD_PAGE_SHIFT);
+	iommu_flush_iotlb_psi(iommu, domain->id, start_pfn,
+			      (last_pfn - start_pfn + 1));
 
 	/* free iova */
 	__free_iova(&domain->iovad, iova);
@@ -2757,21 +2831,20 @@ static int intel_nontranslate_map_sg(struct device *hddev,
 static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int nelems,
 			enum dma_data_direction dir, struct dma_attrs *attrs)
 {
-	phys_addr_t addr;
 	int i;
 	struct pci_dev *pdev = to_pci_dev(hwdev);
 	struct dmar_domain *domain;
 	size_t size = 0;
 	int prot = 0;
-	size_t offset = 0;
+	size_t offset_pfn = 0;
 	struct iova *iova = NULL;
 	int ret;
 	struct scatterlist *sg;
-	unsigned long start_addr;
+	unsigned long start_vpfn;
 	struct intel_iommu *iommu;
 
 	BUG_ON(dir == DMA_NONE);
-	if (iommu_no_mapping(pdev))
+	if (iommu_no_mapping(hwdev))
 		return intel_nontranslate_map_sg(hwdev, sglist, nelems, dir);
 
 	domain = get_valid_domain_for_dev(pdev);
@@ -2780,12 +2853,11 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne
 
 	iommu = domain_get_iommu(domain);
 
-	for_each_sg(sglist, sg, nelems, i) {
-		addr = page_to_phys(sg_page(sg)) + sg->offset;
-		size += aligned_size((u64)addr, sg->length);
-	}
+	for_each_sg(sglist, sg, nelems, i)
+		size += aligned_nrpages(sg->offset, sg->length);
 
-	iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask);
+	iova = intel_alloc_iova(hwdev, domain, dma_to_mm_pfn(size),
+				pdev->dma_mask);
 	if (!iova) {
 		sglist->dma_length = 0;
 		return 0;
@@ -2801,35 +2873,24 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne
 	if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)
 		prot |= DMA_PTE_WRITE;
 
-	start_addr = iova->pfn_lo << PAGE_SHIFT;
-	offset = 0;
-	for_each_sg(sglist, sg, nelems, i) {
-		addr = page_to_phys(sg_page(sg)) + sg->offset;
-		size = aligned_size((u64)addr, sg->length);
-		ret = domain_page_mapping(domain, start_addr + offset,
-					  ((u64)addr) & PHYSICAL_PAGE_MASK,
-					  size, prot);
-		if (ret) {
-			/*  clear the page */
-			dma_pte_clear_range(domain, start_addr,
-				  start_addr + offset);
-			/* free page tables */
-			dma_pte_free_pagetable(domain, start_addr,
-				  start_addr + offset);
-			/* free iova */
-			__free_iova(&domain->iovad, iova);
-			return 0;
-		}
-		sg->dma_address = start_addr + offset +
-				((u64)addr & (~PAGE_MASK));
-		sg->dma_length = sg->length;
-		offset += size;
+	start_vpfn = mm_to_dma_pfn(iova->pfn_lo);
+
+	ret = domain_sg_mapping(domain, start_vpfn, sglist, size, prot);
+	if (unlikely(ret)) {
+		/*  clear the page */
+		dma_pte_clear_range(domain, start_vpfn,
+				    start_vpfn + size - 1);
+		/* free page tables */
+		dma_pte_free_pagetable(domain, start_vpfn,
+				       start_vpfn + size - 1);
+		/* free iova */
+		__free_iova(&domain->iovad, iova);
+		return 0;
 	}
 
 	/* it's a non-present to present mapping. Only flush if caching mode */
 	if (cap_caching_mode(iommu->cap))
-		iommu_flush_iotlb_psi(iommu, 0, start_addr,
-				      offset >> VTD_PAGE_SHIFT);
+		iommu_flush_iotlb_psi(iommu, 0, start_vpfn, offset_pfn);
 	else
 		iommu_flush_write_buffer(iommu);
 
@@ -3334,7 +3395,6 @@ static int md_domain_init(struct dmar_domain *domain, int guest_width)
 	int adjust_width;
 
 	init_iova_domain(&domain->iovad, DMA_32BIT_PFN);
-	spin_lock_init(&domain->mapping_lock);
 	spin_lock_init(&domain->iommu_lock);
 
 	domain_reserve_special_ranges(domain);
@@ -3348,6 +3408,7 @@ static int md_domain_init(struct dmar_domain *domain, int guest_width)
 
 	domain->iommu_count = 0;
 	domain->iommu_coherency = 0;
+	domain->iommu_snooping = 0;
 	domain->max_addr = 0;
 
 	/* always allocate the top pgd */
@@ -3388,8 +3449,6 @@ static void iommu_free_vm_domain(struct dmar_domain *domain)
 
 static void vm_domain_exit(struct dmar_domain *domain)
 {
-	u64 end;
-
 	/* Domain 0 is reserved, so dont process it */
 	if (!domain)
 		return;
@@ -3397,14 +3456,12 @@ static void vm_domain_exit(struct dmar_domain *domain)
 	vm_domain_remove_all_dev_info(domain);
 	/* destroy iovas */
 	put_iova_domain(&domain->iovad);
-	end = DOMAIN_MAX_ADDR(domain->gaw);
-	end = end & (~VTD_PAGE_MASK);
 
 	/* clear ptes */
-	dma_pte_clear_range(domain, 0, end);
+	dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
 
 	/* free page tables */
-	dma_pte_free_pagetable(domain, 0, end);
+	dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
 
 	iommu_free_vm_domain(domain);
 	free_domain_mem(domain);
@@ -3513,7 +3570,7 @@ static int intel_iommu_map_range(struct iommu_domain *domain,
 	if ((iommu_prot & IOMMU_CACHE) && dmar_domain->iommu_snooping)
 		prot |= DMA_PTE_SNP;
 
-	max_addr = (iova & VTD_PAGE_MASK) + VTD_PAGE_ALIGN(size);
+	max_addr = iova + size;
 	if (dmar_domain->max_addr < max_addr) {
 		int min_agaw;
 		u64 end;
@@ -3531,8 +3588,11 @@ static int intel_iommu_map_range(struct iommu_domain *domain,
 		}
 		dmar_domain->max_addr = max_addr;
 	}
-
-	ret = domain_page_mapping(dmar_domain, iova, hpa, size, prot);
+	/* Round up size to next multiple of PAGE_SIZE, if it and
+	   the low bits of hpa would take us onto the next page */
+	size = aligned_nrpages(hpa, size);
+	ret = domain_pfn_mapping(dmar_domain, iova >> VTD_PAGE_SHIFT,
+				 hpa >> VTD_PAGE_SHIFT, size, prot);
 	return ret;
 }
 
@@ -3540,15 +3600,15 @@ static void intel_iommu_unmap_range(struct iommu_domain *domain,
 				    unsigned long iova, size_t size)
 {
 	struct dmar_domain *dmar_domain = domain->priv;
-	dma_addr_t base;
 
-	/* The address might not be aligned */
-	base = iova & VTD_PAGE_MASK;
-	size = VTD_PAGE_ALIGN(size);
-	dma_pte_clear_range(dmar_domain, base, base + size);
+	if (!size)
+		return;
+
+	dma_pte_clear_range(dmar_domain, iova >> VTD_PAGE_SHIFT,
+			    (iova + size - 1) >> VTD_PAGE_SHIFT);
 
-	if (dmar_domain->max_addr == base + size)
-		dmar_domain->max_addr = base;
+	if (dmar_domain->max_addr == iova + size)
+		dmar_domain->max_addr = iova;
 }
 
 static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain,
@@ -3558,7 +3618,7 @@ static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain,
 	struct dma_pte *pte;
 	u64 phys = 0;
 
-	pte = addr_to_dma_pte(dmar_domain, iova);
+	pte = pfn_to_dma_pte(dmar_domain, iova >> VTD_PAGE_SHIFT);
 	if (pte)
 		phys = dma_pte_addr(pte);
 
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index e3a87210e94..e03fe98f061 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -598,6 +598,29 @@ int pci_iov_resource_bar(struct pci_dev *dev, int resno,
 }
 
 /**
+ * pci_sriov_resource_alignment - get resource alignment for VF BAR
+ * @dev: the PCI device
+ * @resno: the resource number
+ *
+ * Returns the alignment of the VF BAR found in the SR-IOV capability.
+ * This is not the same as the resource size which is defined as
+ * the VF BAR size multiplied by the number of VFs.  The alignment
+ * is just the VF BAR size.
+ */
+int pci_sriov_resource_alignment(struct pci_dev *dev, int resno)
+{
+	struct resource tmp;
+	enum pci_bar_type type;
+	int reg = pci_iov_resource_bar(dev, resno, &type);
+	
+	if (!reg)
+		return 0;
+
+	 __pci_read_base(dev, type, &tmp, reg);
+	return resource_alignment(&tmp);
+}
+
+/**
  * pci_restore_iov_state - restore the state of the IOV capability
  * @dev: the PCI device
  */
diff --git a/drivers/pci/iova.c b/drivers/pci/iova.c
index 2287116e982..46dd440e231 100644
--- a/drivers/pci/iova.c
+++ b/drivers/pci/iova.c
@@ -1,9 +1,19 @@
 /*
- * Copyright (c) 2006, Intel Corporation.
+ * Copyright © 2006-2009, Intel Corporation.
  *
- * This file is released under the GPLv2.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
  *
- * Copyright (C) 2006-2008 Intel Corporation
  * Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
  */
 
@@ -123,7 +133,15 @@ move_left:
 	/* Insert the new_iova into domain rbtree by holding writer lock */
 	/* Add new node and rebalance tree. */
 	{
-		struct rb_node **entry = &((prev)), *parent = NULL;
+		struct rb_node **entry, *parent = NULL;
+
+		/* If we have 'prev', it's a valid place to start the
+		   insertion. Otherwise, start from the root. */
+		if (prev)
+			entry = &prev;
+		else
+			entry = &iovad->rbroot.rb_node;
+
 		/* Figure out where to put new node */
 		while (*entry) {
 			struct iova *this = container_of(*entry,
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d9f06fbfa0b..d986afb7032 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -127,17 +127,23 @@ static inline __attribute_const__ u32 msi_enabled_mask(u16 control)
  * reliably as devices without an INTx disable bit will then generate a
  * level IRQ which will never be cleared.
  */
-static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+static u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 
 	if (!desc->msi_attrib.maskbit)
-		return;
+		return 0;
 
 	mask_bits &= ~mask;
 	mask_bits |= flag;
 	pci_write_config_dword(desc->dev, desc->mask_pos, mask_bits);
-	desc->masked = mask_bits;
+
+	return mask_bits;
+}
+
+static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+{
+	desc->masked = __msi_mask_irq(desc, mask, flag);
 }
 
 /*
@@ -147,15 +153,21 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
  * file.  This saves a few milliseconds when initialising devices with lots
  * of MSI-X interrupts.
  */
-static void msix_mask_irq(struct msi_desc *desc, u32 flag)
+static u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
-					PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET;
+						PCI_MSIX_ENTRY_VECTOR_CTRL;
 	mask_bits &= ~1;
 	mask_bits |= flag;
 	writel(mask_bits, desc->mask_base + offset);
-	desc->masked = mask_bits;
+
+	return mask_bits;
+}
+
+static void msix_mask_irq(struct msi_desc *desc, u32 flag)
+{
+	desc->masked = __msix_mask_irq(desc, flag);
 }
 
 static void msi_set_mask_bit(unsigned irq, u32 flag)
@@ -188,9 +200,9 @@ void read_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg)
 		void __iomem *base = entry->mask_base +
 			entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
 
-		msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
-		msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
-		msg->data = readl(base + PCI_MSIX_ENTRY_DATA_OFFSET);
+		msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR);
+		msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR);
+		msg->data = readl(base + PCI_MSIX_ENTRY_DATA);
 	} else {
 		struct pci_dev *dev = entry->dev;
 		int pos = entry->msi_attrib.pos;
@@ -225,11 +237,9 @@ void write_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg)
 		base = entry->mask_base +
 			entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
 
-		writel(msg->address_lo,
-			base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
-		writel(msg->address_hi,
-			base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
-		writel(msg->data, base + PCI_MSIX_ENTRY_DATA_OFFSET);
+		writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR);
+		writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR);
+		writel(msg->data, base + PCI_MSIX_ENTRY_DATA);
 	} else {
 		struct pci_dev *dev = entry->dev;
 		int pos = entry->msi_attrib.pos;
@@ -385,6 +395,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 	/* Configure MSI capability structure */
 	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
 	if (ret) {
+		msi_mask_irq(entry, mask, ~mask);
 		msi_free_irqs(dev);
 		return ret;
 	}
@@ -439,8 +450,14 @@ static int msix_capability_init(struct pci_dev *dev,
 
 	for (i = 0; i < nvec; i++) {
 		entry = alloc_msi_entry(dev);
-		if (!entry)
-			break;
+		if (!entry) {
+			if (!i)
+				iounmap(base);
+			else
+				msi_free_irqs(dev);
+			/* No enough memory. Don't try again */
+			return -ENOMEM;
+		}
 
  		j = entries[i].entry;
 		entry->msi_attrib.is_msix = 1;
@@ -487,7 +504,7 @@ static int msix_capability_init(struct pci_dev *dev,
 		set_irq_msi(entry->irq, entry);
 		j = entries[i].entry;
 		entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE +
-					PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
+						PCI_MSIX_ENTRY_VECTOR_CTRL);
 		msix_mask_irq(entry, 1);
 		i++;
 	}
@@ -611,9 +628,11 @@ void pci_msi_shutdown(struct pci_dev *dev)
 	pci_intx_for_msi(dev, 1);
 	dev->msi_enabled = 0;
 
+	/* Return the device with MSI unmasked as initial states */
 	pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &ctrl);
 	mask = msi_capable_mask(ctrl);
-	msi_mask_irq(desc, mask, ~mask);
+	/* Keep cached state to be restored */
+	__msi_mask_irq(desc, mask, ~mask);
 
 	/* Restore dev->irq to its default pin-assertion irq */
 	dev->irq = desc->msi_attrib.default_irq;
@@ -653,7 +672,6 @@ static int msi_free_irqs(struct pci_dev* dev)
 
 	list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
 		if (entry->msi_attrib.is_msix) {
-			msix_mask_irq(entry, 1);
 			if (list_is_last(&entry->list, &dev->msi_list))
 				iounmap(entry->mask_base);
 		}
@@ -741,9 +759,17 @@ static void msix_free_all_irqs(struct pci_dev *dev)
 
 void pci_msix_shutdown(struct pci_dev* dev)
 {
+	struct msi_desc *entry;
+
 	if (!pci_msi_enable || !dev || !dev->msix_enabled)
 		return;
 
+	/* Return the device with MSI-X masked as initial states */
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		/* Keep cached states to be restored */
+		__msix_mask_irq(entry, 1);
+	}
+
 	msix_set_enable(dev, 0);
 	pci_intx_for_msi(dev, 1);
 	dev->msix_enabled = 0;
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index a0662842550..de27c1cb5a2 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -6,11 +6,11 @@
 #ifndef MSI_H
 #define MSI_H
 
-#define PCI_MSIX_ENTRY_SIZE			16
-#define  PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET	0
-#define  PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET	4
-#define  PCI_MSIX_ENTRY_DATA_OFFSET		8
-#define  PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET	12
+#define PCI_MSIX_ENTRY_SIZE		16
+#define  PCI_MSIX_ENTRY_LOWER_ADDR	0
+#define  PCI_MSIX_ENTRY_UPPER_ADDR	4
+#define  PCI_MSIX_ENTRY_DATA		8
+#define  PCI_MSIX_ENTRY_VECTOR_CTRL	12
 
 #define msi_control_reg(base)		(base + PCI_MSI_FLAGS)
 #define msi_lower_address_reg(base)	(base + PCI_MSI_ADDRESS_LO)
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index d76c4c85367..f99bc7f089f 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -508,7 +508,7 @@ static int pci_restore_standard_config(struct pci_dev *pci_dev)
 			return error;
 	}
 
-	return pci_dev->state_saved ? pci_restore_state(pci_dev) : 0;
+	return pci_restore_state(pci_dev);
 }
 
 static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6c93af5ced1..7b70312181d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -846,6 +846,8 @@ pci_restore_state(struct pci_dev *dev)
 	int i;
 	u32 val;
 
+	if (!dev->state_saved)
+		return 0;
 	/* PCI Express register must be restored first */
 	pci_restore_pcie_state(dev);
 
@@ -1517,11 +1519,20 @@ void pci_enable_ari(struct pci_dev *dev)
  *
  * Perform INTx swizzling for a device behind one level of bridge.  This is
  * required by section 9.1 of the PCI-to-PCI bridge specification for devices
- * behind bridges on add-in cards.
+ * behind bridges on add-in cards.  For devices with ARI enabled, the slot
+ * number is always 0 (see the Implementation Note in section 2.2.8.1 of
+ * the PCI Express Base Specification, Revision 2.1)
  */
 u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin)
 {
-	return (((pin - 1) + PCI_SLOT(dev->devfn)) % 4) + 1;
+	int slot;
+
+	if (pci_ari_enabled(dev->bus))
+		slot = 0;
+	else
+		slot = PCI_SLOT(dev->devfn);
+
+	return (((pin - 1) + slot) % 4) + 1;
 }
 
 int
@@ -2171,7 +2182,7 @@ static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
 	u16 ctrl;
 	struct pci_dev *pdev;
 
-	if (dev->subordinate)
+	if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self)
 		return -ENOTTY;
 
 	list_for_each_entry(pdev, &dev->bus->devices, bus_list)
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index f73bcbedf37..5ff4d25bf0e 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -243,6 +243,7 @@ extern int pci_iov_init(struct pci_dev *dev);
 extern void pci_iov_release(struct pci_dev *dev);
 extern int pci_iov_resource_bar(struct pci_dev *dev, int resno,
 				enum pci_bar_type *type);
+extern int pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
 extern void pci_restore_iov_state(struct pci_dev *dev);
 extern int pci_iov_bus_range(struct pci_bus *bus);
 
@@ -298,4 +299,16 @@ static inline int pci_ats_enabled(struct pci_dev *dev)
 }
 #endif /* CONFIG_PCI_IOV */
 
+static inline int pci_resource_alignment(struct pci_dev *dev,
+					 struct resource *res)
+{
+#ifdef CONFIG_PCI_IOV
+	int resno = res - dev->resource;
+
+	if (resno >= PCI_IOV_RESOURCES && resno <= PCI_IOV_RESOURCE_END)
+		return pci_sriov_resource_alignment(dev, resno);
+#endif
+	return resource_alignment(res);
+}
+
 #endif /* DRIVERS_PCI_H */
diff --git a/drivers/pci/pcie/aer/ecrc.c b/drivers/pci/pcie/aer/ecrc.c
index ece97df4df6..a928d8ab6bd 100644
--- a/drivers/pci/pcie/aer/ecrc.c
+++ b/drivers/pci/pcie/aer/ecrc.c
@@ -106,7 +106,7 @@ void pcie_set_ecrc_checking(struct pci_dev *dev)
 		disable_ecrc_checking(dev);
 		break;
 	case ECRC_POLICY_ON:
-		enable_ecrc_checking(dev);;
+		enable_ecrc_checking(dev);
 		break;
 	default:
 		return;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 56552d74abe..06b96562396 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1058,6 +1058,11 @@ static void __devinit quirk_no_ata_d3(struct pci_dev *pdev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3);
+/* ALi loses some register settings that we cannot then restore */
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, quirk_no_ata_d3);
+/* VIA comes back fine but we need to keep it alive or ACPI GTM failures
+   occur when mode detecting */
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_no_ata_d3);
 
 /* This was originally an Alpha specific thing, but it really fits here.
  * The i82375 PCI/EISA bridge appears as non-classified. Fix that.
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index b636e245445..7c443b4583a 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -25,7 +25,7 @@
 #include <linux/ioport.h>
 #include <linux/cache.h>
 #include <linux/slab.h>
-
+#include "pci.h"
 
 static void pbus_assign_resources_sorted(const struct pci_bus *bus)
 {
@@ -384,7 +384,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long
 				continue;
 			r_size = resource_size(r);
 			/* For bridges size != alignment */
-			align = resource_alignment(r);
+			align = pci_resource_alignment(dev, r);
 			order = __ffs(align) - 20;
 			if (order > 11) {
 				dev_warn(&dev->dev, "BAR %d bad alignment %llx: "
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index b711fb7181e..88cdd1a937d 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -100,16 +100,16 @@ int pci_claim_resource(struct pci_dev *dev, int resource)
 {
 	struct resource *res = &dev->resource[resource];
 	struct resource *root;
-	char *dtype = resource < PCI_BRIDGE_RESOURCES ? "device" : "bridge";
 	int err;
 
 	root = pci_find_parent_resource(dev, res);
 
 	err = -EINVAL;
 	if (root != NULL)
-		err = insert_resource(root, res);
+		err = request_resource(root, res);
 
 	if (err) {
+		const char *dtype = resource < PCI_BRIDGE_RESOURCES ? "device" : "bridge";
 		dev_err(&dev->dev, "BAR %d: %s of %s %pR\n",
 			resource,
 			root ? "address space collision on" :
@@ -144,7 +144,7 @@ static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
 
 	size = resource_size(res);
 	min = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM;
-	align = resource_alignment(res);
+	align = pci_resource_alignment(dev, res);
 
 	/* First, try exact prefetching match.. */
 	ret = pci_bus_alloc_resource(bus, res, size, align, min,
@@ -178,7 +178,7 @@ int pci_assign_resource(struct pci_dev *dev, int resno)
 	struct pci_bus *bus;
 	int ret;
 
-	align = resource_alignment(res);
+	align = pci_resource_alignment(dev, res);
 	if (!align) {
 		dev_info(&dev->dev, "BAR %d: can't allocate resource (bogus "
 			"alignment) %pR flags %#lx\n",
@@ -259,7 +259,7 @@ void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head)
 		if (!(r->flags) || r->parent)
 			continue;
 
-		r_align = resource_alignment(r);
+		r_align = pci_resource_alignment(dev, r);
 		if (!r_align) {
 			dev_warn(&dev->dev, "BAR %d: bogus alignment "
 				"%pR flags %#lx\n",
@@ -271,7 +271,7 @@ void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head)
 			struct resource_list *ln = list->next;
 
 			if (ln)
-				align = resource_alignment(ln->res);
+				align = pci_resource_alignment(ln->dev, ln->res);
 
 			if (r_align > align) {
 				tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index eddb0748b0e..8c02b6c53bd 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -311,7 +311,7 @@ EXPORT_SYMBOL_GPL(pci_destroy_slot);
 #include <linux/pci_hotplug.h>
 /**
  * pci_hp_create_link - create symbolic link to the hotplug driver module.
- * @slot: struct pci_slot
+ * @pci_slot: struct pci_slot
  *
  * Helper function for pci_hotplug_core.c to create symbolic link to
  * the hotplug driver module.
@@ -334,7 +334,7 @@ EXPORT_SYMBOL_GPL(pci_hp_create_module_link);
 
 /**
  * pci_hp_remove_link - remove symbolic link to the hotplug driver module.
- * @slot: struct pci_slot
+ * @pci_slot: struct pci_slot
  *
  * Helper function for pci_hotplug_core.c to remove symbolic link to
  * the hotplug driver module.
diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
index ec22284eed3..e1c1ec54089 100644
--- a/drivers/pci/syscall.c
+++ b/drivers/pci/syscall.c
@@ -9,7 +9,6 @@
 
 #include <linux/errno.h>
 #include <linux/pci.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <asm/uaccess.h>
 #include "pci.h"
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index 9ad97ea836e..8eb04230fec 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -472,7 +472,8 @@ static int __init init_tcic(void)
     init_timer(&poll_timer);
 
     /* Build interrupt mask */
-    printk(", %d sockets\n" KERN_INFO "  irq list (", sockets);
+    printk(KERN_CONT ", %d sockets\n", sockets);
+    printk(KERN_INFO "  irq list (");
     if (irq_list_count == 0)
 	mask = irq_mask;
     else
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index 659421d0ca4..d4ad50d737b 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -1,7 +1,7 @@
 /*
  * vrc4171_card.c, NEC VRC4171 Card Controller driver for Socket Services.
  *
- * Copyright (C) 2003-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -32,7 +32,7 @@
 #include "i82365.h"
 
 MODULE_DESCRIPTION("NEC VRC4171 Card Controllers driver for Socket Services");
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
 MODULE_LICENSE("GPL");
 
 #define CARD_MAX_SLOTS		2
diff --git a/drivers/pcmcia/vrc4173_cardu.c b/drivers/pcmcia/vrc4173_cardu.c
index 812f038e9bd..9b3c15827e5 100644
--- a/drivers/pcmcia/vrc4173_cardu.c
+++ b/drivers/pcmcia/vrc4173_cardu.c
@@ -6,7 +6,7 @@
  * 	NEC VRC4173 CARDU driver for Socket Services
  *	(This device doesn't support CardBus. it is supporting only 16bit PC Card.)
  *
- * Copyright 2002,2003 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright 2002,2003 Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License as published by the
@@ -41,7 +41,7 @@
 #include "vrc4173_cardu.h"
 
 MODULE_DESCRIPTION("NEC VRC4173 CARDU driver for Socket Services");
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
 MODULE_LICENSE("GPL");
 
 static int vrc4173_cardu_slots;
diff --git a/drivers/pcmcia/vrc4173_cardu.h b/drivers/pcmcia/vrc4173_cardu.h
index 7d77c74120c..a7d96018ed8 100644
--- a/drivers/pcmcia/vrc4173_cardu.h
+++ b/drivers/pcmcia/vrc4173_cardu.h
@@ -5,7 +5,7 @@
  * BRIEF MODULE DESCRIPTION
  *	Include file for NEC VRC4173 CARDU.
  *
- * Copyright 2002 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright 2002 Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License as published by the
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 7232fe7104a..77c6097ced8 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -277,31 +277,6 @@ config THINKPAD_ACPI_UNSAFE_LEDS
 	  Say N here, unless you are building a kernel for your own
 	  use, and need to control the important firmware LEDs.
 
-config THINKPAD_ACPI_DOCK
-	bool "Legacy Docking Station Support"
-	depends on THINKPAD_ACPI
-	depends on ACPI_DOCK=n
-	default n
-	---help---
-	  Allows the thinkpad_acpi driver to handle docking station events.
-	  This support was made obsolete by the generic ACPI docking station
-	  support (CONFIG_ACPI_DOCK).  It will allow locking and removing the
-	  laptop from the docking station, but will not properly connect PCI
-	  devices.
-
-	  If you are not sure, say N here.
-
-config THINKPAD_ACPI_BAY
-	bool "Legacy Removable Bay Support"
-	depends on THINKPAD_ACPI
-	default y
-	---help---
-	  Allows the thinkpad_acpi driver to handle removable bays.  It will
-	  electrically disable the device in the bay, and also generate
-	  notifications when the bay lever is ejected or inserted.
-
-	  If you are not sure, say Y here.
-
 config THINKPAD_ACPI_VIDEO
 	bool "Video output control support"
 	depends on THINKPAD_ACPI
@@ -355,6 +330,7 @@ config EEEPC_LAPTOP
 	depends on INPUT
 	depends on EXPERIMENTAL
 	depends on RFKILL || RFKILL = n
+	depends on HOTPLUG_PCI
 	select BACKLIGHT_CLASS_DEVICE
 	select HWMON
 	---help---
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index be2fd6f9163..fb45f5ee8df 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -973,7 +973,7 @@ static int acer_rfkill_set(void *data, bool blocked)
 {
 	acpi_status status;
 	u32 cap = (unsigned long)data;
-	status = set_u32(!!blocked, cap);
+	status = set_u32(!blocked, cap);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 	return 0;
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 4207b26ff99..222ffb892f2 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -16,6 +16,8 @@
  *  GNU General Public License for more details.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -31,6 +33,7 @@
 #include <linux/input.h>
 #include <linux/rfkill.h>
 #include <linux/pci.h>
+#include <linux/pci_hotplug.h>
 
 #define EEEPC_LAPTOP_VERSION	"0.1"
 
@@ -40,11 +43,6 @@
 #define EEEPC_HOTK_DEVICE_NAME	"Hotkey"
 #define EEEPC_HOTK_HID		"ASUS010"
 
-#define EEEPC_LOG	EEEPC_HOTK_FILE ": "
-#define EEEPC_ERR	KERN_ERR	EEEPC_LOG
-#define EEEPC_WARNING	KERN_WARNING	EEEPC_LOG
-#define EEEPC_NOTICE	KERN_NOTICE	EEEPC_LOG
-#define EEEPC_INFO	KERN_INFO	EEEPC_LOG
 
 /*
  * Definitions for Asus EeePC
@@ -141,8 +139,11 @@ struct eeepc_hotk {
 	u16 event_count[128];		/* count for each event */
 	struct input_dev *inputdev;
 	u16 *keycode_map;
-	struct rfkill *eeepc_wlan_rfkill;
-	struct rfkill *eeepc_bluetooth_rfkill;
+	struct rfkill *wlan_rfkill;
+	struct rfkill *bluetooth_rfkill;
+	struct rfkill *wwan3g_rfkill;
+	struct hotplug_slot *hotplug_slot;
+	struct work_struct hotplug_work;
 };
 
 /* The actual device the driver binds to */
@@ -213,6 +214,15 @@ static struct acpi_driver eeepc_hotk_driver = {
 	},
 };
 
+/* PCI hotplug ops */
+static int eeepc_get_adapter_status(struct hotplug_slot *slot, u8 *value);
+
+static struct hotplug_slot_ops eeepc_hotplug_slot_ops = {
+	.owner = THIS_MODULE,
+	.get_adapter_status = eeepc_get_adapter_status,
+	.get_power_status = eeepc_get_adapter_status,
+};
+
 /* The backlight device /sys/class/backlight */
 static struct backlight_device *eeepc_backlight_device;
 
@@ -274,20 +284,20 @@ static int set_acpi(int cm, int value)
 		if (method == NULL)
 			return -ENODEV;
 		if (write_acpi_int(ehotk->handle, method, value, NULL))
-			printk(EEEPC_WARNING "Error writing %s\n", method);
+			pr_warning("Error writing %s\n", method);
 	}
 	return 0;
 }
 
 static int get_acpi(int cm)
 {
-	int value = -1;
+	int value = -ENODEV;
 	if ((ehotk->cm_supported & (0x1 << cm))) {
 		const char *method = cm_getv[cm];
 		if (method == NULL)
 			return -ENODEV;
 		if (read_acpi_int(ehotk->handle, method, &value))
-			printk(EEEPC_WARNING "Error reading %s\n", method);
+			pr_warning("Error reading %s\n", method);
 	}
 	return value;
 }
@@ -359,13 +369,19 @@ static ssize_t store_sys_acpi(int cm, const char *buf, size_t count)
 
 	rv = parse_arg(buf, count, &value);
 	if (rv > 0)
-		set_acpi(cm, value);
+		value = set_acpi(cm, value);
+	if (value < 0)
+		return value;
 	return rv;
 }
 
 static ssize_t show_sys_acpi(int cm, char *buf)
 {
-	return sprintf(buf, "%d\n", get_acpi(cm));
+	int value = get_acpi(cm);
+
+	if (value < 0)
+		return value;
+	return sprintf(buf, "%d\n", value);
 }
 
 #define EEEPC_CREATE_DEVICE_ATTR(_name, _cm)				\
@@ -539,6 +555,28 @@ static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode)
 	return -EINVAL;
 }
 
+static void cmsg_quirk(int cm, const char *name)
+{
+	int dummy;
+
+	/* Some BIOSes do not report cm although it is avaliable.
+	   Check if cm_getv[cm] works and, if yes, assume cm should be set. */
+	if (!(ehotk->cm_supported & (1 << cm))
+	    && !read_acpi_int(ehotk->handle, cm_getv[cm], &dummy)) {
+		pr_info("%s (%x) not reported by BIOS,"
+			" enabling anyway\n", name, 1 << cm);
+		ehotk->cm_supported |= 1 << cm;
+	}
+}
+
+static void cmsg_quirks(void)
+{
+	cmsg_quirk(CM_ASL_LID, "LID");
+	cmsg_quirk(CM_ASL_TYPE, "TYPE");
+	cmsg_quirk(CM_ASL_PANELPOWER, "PANELPOWER");
+	cmsg_quirk(CM_ASL_TPD, "TPD");
+}
+
 static int eeepc_hotk_check(void)
 {
 	const struct key_entry *key;
@@ -551,26 +589,24 @@ static int eeepc_hotk_check(void)
 	if (ehotk->device->status.present) {
 		if (write_acpi_int(ehotk->handle, "INIT", ehotk->init_flag,
 				    &buffer)) {
-			printk(EEEPC_ERR "Hotkey initialization failed\n");
+			pr_err("Hotkey initialization failed\n");
 			return -ENODEV;
 		} else {
-			printk(EEEPC_NOTICE "Hotkey init flags 0x%x\n",
-			       ehotk->init_flag);
+			pr_notice("Hotkey init flags 0x%x\n", ehotk->init_flag);
 		}
 		/* get control methods supported */
 		if (read_acpi_int(ehotk->handle, "CMSG"
 				   , &ehotk->cm_supported)) {
-			printk(EEEPC_ERR
-			       "Get control methods supported failed\n");
+			pr_err("Get control methods supported failed\n");
 			return -ENODEV;
 		} else {
-			printk(EEEPC_INFO
-			       "Get control methods supported: 0x%x\n",
-			       ehotk->cm_supported);
+			cmsg_quirks();
+			pr_info("Get control methods supported: 0x%x\n",
+				ehotk->cm_supported);
 		}
 		ehotk->inputdev = input_allocate_device();
 		if (!ehotk->inputdev) {
-			printk(EEEPC_INFO "Unable to allocate input device\n");
+			pr_info("Unable to allocate input device\n");
 			return 0;
 		}
 		ehotk->inputdev->name = "Asus EeePC extra buttons";
@@ -589,12 +625,12 @@ static int eeepc_hotk_check(void)
 		}
 		result = input_register_device(ehotk->inputdev);
 		if (result) {
-			printk(EEEPC_INFO "Unable to register input device\n");
+			pr_info("Unable to register input device\n");
 			input_free_device(ehotk->inputdev);
 			return 0;
 		}
 	} else {
-		printk(EEEPC_ERR "Hotkey device not present, aborting\n");
+		pr_err("Hotkey device not present, aborting\n");
 		return -EINVAL;
 	}
 	return 0;
@@ -612,14 +648,27 @@ static int notify_brn(void)
 	return -1;
 }
 
-static void eeepc_rfkill_hotplug(void)
+static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot,
+				    u8 *value)
+{
+	int val = get_acpi(CM_ASL_WLAN);
+
+	if (val == 1 || val == 0)
+		*value = val;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static void eeepc_hotplug_work(struct work_struct *work)
 {
 	struct pci_dev *dev;
 	struct pci_bus *bus = pci_find_bus(0, 1);
 	bool blocked;
 
 	if (!bus) {
-		printk(EEEPC_WARNING "Unable to find PCI bus 1?\n");
+		pr_warning("Unable to find PCI bus 1?\n");
 		return;
 	}
 
@@ -635,7 +684,7 @@ static void eeepc_rfkill_hotplug(void)
 		if (dev) {
 			pci_bus_assign_resources(bus);
 			if (pci_bus_add_device(dev))
-				printk(EEEPC_ERR "Unable to hotplug wifi\n");
+				pr_err("Unable to hotplug wifi\n");
 		}
 	} else {
 		dev = pci_get_slot(bus, 0);
@@ -645,7 +694,7 @@ static void eeepc_rfkill_hotplug(void)
 		}
 	}
 
-	rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, blocked);
+	rfkill_set_sw_state(ehotk->wlan_rfkill, blocked);
 }
 
 static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
@@ -653,7 +702,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 	if (event != ACPI_NOTIFY_BUS_CHECK)
 		return;
 
-	eeepc_rfkill_hotplug();
+	schedule_work(&ehotk->hotplug_work);
 }
 
 static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
@@ -718,8 +767,7 @@ static int eeepc_register_rfkill_notifier(char *node)
 						     eeepc_rfkill_notify,
 						     NULL);
 		if (ACPI_FAILURE(status))
-			printk(EEEPC_WARNING
-			       "Failed to register notify on %s\n", node);
+			pr_warning("Failed to register notify on %s\n", node);
 	} else
 		return -ENODEV;
 
@@ -738,19 +786,66 @@ static void eeepc_unregister_rfkill_notifier(char *node)
 						     ACPI_SYSTEM_NOTIFY,
 						     eeepc_rfkill_notify);
 		if (ACPI_FAILURE(status))
-			printk(EEEPC_ERR
-			       "Error removing rfkill notify handler %s\n",
+			pr_err("Error removing rfkill notify handler %s\n",
 				node);
 	}
 }
 
+static void eeepc_cleanup_pci_hotplug(struct hotplug_slot *hotplug_slot)
+{
+	kfree(hotplug_slot->info);
+	kfree(hotplug_slot);
+}
+
+static int eeepc_setup_pci_hotplug(void)
+{
+	int ret = -ENOMEM;
+	struct pci_bus *bus = pci_find_bus(0, 1);
+
+	if (!bus) {
+		pr_err("Unable to find wifi PCI bus\n");
+		return -ENODEV;
+	}
+
+	ehotk->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL);
+	if (!ehotk->hotplug_slot)
+		goto error_slot;
+
+	ehotk->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info),
+					    GFP_KERNEL);
+	if (!ehotk->hotplug_slot->info)
+		goto error_info;
+
+	ehotk->hotplug_slot->private = ehotk;
+	ehotk->hotplug_slot->release = &eeepc_cleanup_pci_hotplug;
+	ehotk->hotplug_slot->ops = &eeepc_hotplug_slot_ops;
+	eeepc_get_adapter_status(ehotk->hotplug_slot,
+				 &ehotk->hotplug_slot->info->adapter_status);
+
+	ret = pci_hp_register(ehotk->hotplug_slot, bus, 0, "eeepc-wifi");
+	if (ret) {
+		pr_err("Unable to register hotplug slot - %d\n", ret);
+		goto error_register;
+	}
+
+	return 0;
+
+error_register:
+	kfree(ehotk->hotplug_slot->info);
+error_info:
+	kfree(ehotk->hotplug_slot);
+	ehotk->hotplug_slot = NULL;
+error_slot:
+	return ret;
+}
+
 static int eeepc_hotk_add(struct acpi_device *device)
 {
 	int result;
 
 	if (!device)
 		 return -EINVAL;
-	printk(EEEPC_NOTICE EEEPC_HOTK_NAME "\n");
+	pr_notice(EEEPC_HOTK_NAME "\n");
 	ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL);
 	if (!ehotk)
 		return -ENOMEM;
@@ -764,53 +859,8 @@ static int eeepc_hotk_add(struct acpi_device *device)
 	if (result)
 		goto ehotk_fail;
 
-	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
-	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
-
-	if (get_acpi(CM_ASL_WLAN) != -1) {
-		ehotk->eeepc_wlan_rfkill = rfkill_alloc("eeepc-wlan",
-							&device->dev,
-							RFKILL_TYPE_WLAN,
-							&eeepc_rfkill_ops,
-							(void *)CM_ASL_WLAN);
-
-		if (!ehotk->eeepc_wlan_rfkill)
-			goto wlan_fail;
-
-		rfkill_init_sw_state(ehotk->eeepc_wlan_rfkill,
-				     get_acpi(CM_ASL_WLAN) != 1);
-		result = rfkill_register(ehotk->eeepc_wlan_rfkill);
-		if (result)
-			goto wlan_fail;
-	}
-
-	if (get_acpi(CM_ASL_BLUETOOTH) != -1) {
-		ehotk->eeepc_bluetooth_rfkill =
-			rfkill_alloc("eeepc-bluetooth",
-				     &device->dev,
-				     RFKILL_TYPE_BLUETOOTH,
-				     &eeepc_rfkill_ops,
-				     (void *)CM_ASL_BLUETOOTH);
-
-		if (!ehotk->eeepc_bluetooth_rfkill)
-			goto bluetooth_fail;
-
-		rfkill_init_sw_state(ehotk->eeepc_bluetooth_rfkill,
-				     get_acpi(CM_ASL_BLUETOOTH) != 1);
-		result = rfkill_register(ehotk->eeepc_bluetooth_rfkill);
-		if (result)
-			goto bluetooth_fail;
-	}
-
 	return 0;
 
- bluetooth_fail:
-	rfkill_destroy(ehotk->eeepc_bluetooth_rfkill);
-	rfkill_unregister(ehotk->eeepc_wlan_rfkill);
- wlan_fail:
-	rfkill_destroy(ehotk->eeepc_wlan_rfkill);
-	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
-	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
  ehotk_fail:
 	kfree(ehotk);
 	ehotk = NULL;
@@ -823,16 +873,13 @@ static int eeepc_hotk_remove(struct acpi_device *device, int type)
 	if (!device || !acpi_driver_data(device))
 		 return -EINVAL;
 
-	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
-	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
-
 	kfree(ehotk);
 	return 0;
 }
 
 static int eeepc_hotk_resume(struct acpi_device *device)
 {
-	if (ehotk->eeepc_wlan_rfkill) {
+	if (ehotk->wlan_rfkill) {
 		bool wlan;
 
 		/* Workaround - it seems that _PTS disables the wireless
@@ -844,14 +891,13 @@ static int eeepc_hotk_resume(struct acpi_device *device)
 		wlan = get_acpi(CM_ASL_WLAN);
 		set_acpi(CM_ASL_WLAN, wlan);
 
-		rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill,
-				    wlan != 1);
+		rfkill_set_sw_state(ehotk->wlan_rfkill, wlan != 1);
 
-		eeepc_rfkill_hotplug();
+		schedule_work(&ehotk->hotplug_work);
 	}
 
-	if (ehotk->eeepc_bluetooth_rfkill)
-		rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill,
+	if (ehotk->bluetooth_rfkill)
+		rfkill_set_sw_state(ehotk->bluetooth_rfkill,
 				    get_acpi(CM_ASL_BLUETOOTH) != 1);
 
 	return 0;
@@ -973,10 +1019,16 @@ static void eeepc_backlight_exit(void)
 
 static void eeepc_rfkill_exit(void)
 {
-	if (ehotk->eeepc_wlan_rfkill)
-		rfkill_unregister(ehotk->eeepc_wlan_rfkill);
-	if (ehotk->eeepc_bluetooth_rfkill)
-		rfkill_unregister(ehotk->eeepc_bluetooth_rfkill);
+	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
+	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
+	if (ehotk->wlan_rfkill)
+		rfkill_unregister(ehotk->wlan_rfkill);
+	if (ehotk->bluetooth_rfkill)
+		rfkill_unregister(ehotk->bluetooth_rfkill);
+	if (ehotk->wwan3g_rfkill)
+		rfkill_unregister(ehotk->wwan3g_rfkill);
+	if (ehotk->hotplug_slot)
+		pci_hp_deregister(ehotk->hotplug_slot);
 }
 
 static void eeepc_input_exit(void)
@@ -1011,6 +1063,77 @@ static void __exit eeepc_laptop_exit(void)
 	platform_driver_unregister(&platform_driver);
 }
 
+static int eeepc_new_rfkill(struct rfkill **rfkill,
+			    const char *name, struct device *dev,
+			    enum rfkill_type type, int cm)
+{
+	int result;
+
+	result = get_acpi(cm);
+	if (result < 0)
+		return result;
+
+	*rfkill = rfkill_alloc(name, dev, type,
+			       &eeepc_rfkill_ops, (void *)(unsigned long)cm);
+
+	if (!*rfkill)
+		return -EINVAL;
+
+	rfkill_init_sw_state(*rfkill, get_acpi(cm) != 1);
+	result = rfkill_register(*rfkill);
+	if (result) {
+		rfkill_destroy(*rfkill);
+		*rfkill = NULL;
+		return result;
+	}
+	return 0;
+}
+
+
+static int eeepc_rfkill_init(struct device *dev)
+{
+	int result = 0;
+
+	INIT_WORK(&ehotk->hotplug_work, eeepc_hotplug_work);
+
+	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
+	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
+
+	result = eeepc_new_rfkill(&ehotk->wlan_rfkill,
+				  "eeepc-wlan", dev,
+				  RFKILL_TYPE_WLAN, CM_ASL_WLAN);
+
+	if (result && result != -ENODEV)
+		goto exit;
+
+	result = eeepc_new_rfkill(&ehotk->bluetooth_rfkill,
+				  "eeepc-bluetooth", dev,
+				  RFKILL_TYPE_BLUETOOTH, CM_ASL_BLUETOOTH);
+
+	if (result && result != -ENODEV)
+		goto exit;
+
+	result = eeepc_new_rfkill(&ehotk->wwan3g_rfkill,
+				  "eeepc-wwan3g", dev,
+				  RFKILL_TYPE_WWAN, CM_ASL_3G);
+
+	if (result && result != -ENODEV)
+		goto exit;
+
+	result = eeepc_setup_pci_hotplug();
+	/*
+	 * If we get -EBUSY then something else is handling the PCI hotplug -
+	 * don't fail in this case
+	 */
+	if (result == -EBUSY)
+		result = 0;
+
+exit:
+	if (result && result != -ENODEV)
+		eeepc_rfkill_exit();
+	return result;
+}
+
 static int eeepc_backlight_init(struct device *dev)
 {
 	struct backlight_device *bd;
@@ -1018,8 +1141,7 @@ static int eeepc_backlight_init(struct device *dev)
 	bd = backlight_device_register(EEEPC_HOTK_FILE, dev,
 				       NULL, &eeepcbl_ops);
 	if (IS_ERR(bd)) {
-		printk(EEEPC_ERR
-		       "Could not register eeepc backlight device\n");
+		pr_err("Could not register eeepc backlight device\n");
 		eeepc_backlight_device = NULL;
 		return PTR_ERR(bd);
 	}
@@ -1038,8 +1160,7 @@ static int eeepc_hwmon_init(struct device *dev)
 
 	hwmon = hwmon_device_register(dev);
 	if (IS_ERR(hwmon)) {
-		printk(EEEPC_ERR
-		       "Could not register eeepc hwmon device\n");
+		pr_err("Could not register eeepc hwmon device\n");
 		eeepc_hwmon_device = NULL;
 		return PTR_ERR(hwmon);
 	}
@@ -1065,19 +1186,6 @@ static int __init eeepc_laptop_init(void)
 		acpi_bus_unregister_driver(&eeepc_hotk_driver);
 		return -ENODEV;
 	}
-	dev = acpi_get_physical_device(ehotk->device->handle);
-
-	if (!acpi_video_backlight_support()) {
-		result = eeepc_backlight_init(dev);
-		if (result)
-			goto fail_backlight;
-	} else
-		printk(EEEPC_INFO "Backlight controlled by ACPI video "
-		       "driver\n");
-
-	result = eeepc_hwmon_init(dev);
-	if (result)
-		goto fail_hwmon;
 
 	eeepc_enable_camera();
 
@@ -1097,7 +1205,33 @@ static int __init eeepc_laptop_init(void)
 				    &platform_attribute_group);
 	if (result)
 		goto fail_sysfs;
+
+	dev = &platform_device->dev;
+
+	if (!acpi_video_backlight_support()) {
+		result = eeepc_backlight_init(dev);
+		if (result)
+			goto fail_backlight;
+	} else
+		pr_info("Backlight controlled by ACPI video "
+			"driver\n");
+
+	result = eeepc_hwmon_init(dev);
+	if (result)
+		goto fail_hwmon;
+
+	result = eeepc_rfkill_init(dev);
+	if (result)
+		goto fail_rfkill;
+
 	return 0;
+fail_rfkill:
+	eeepc_hwmon_exit();
+fail_hwmon:
+	eeepc_backlight_exit();
+fail_backlight:
+	sysfs_remove_group(&platform_device->dev.kobj,
+			   &platform_attribute_group);
 fail_sysfs:
 	platform_device_del(platform_device);
 fail_platform_device2:
@@ -1105,12 +1239,7 @@ fail_platform_device2:
 fail_platform_device1:
 	platform_driver_unregister(&platform_driver);
 fail_platform_driver:
-	eeepc_hwmon_exit();
-fail_hwmon:
-	eeepc_backlight_exit();
-fail_backlight:
 	eeepc_input_exit();
-	eeepc_rfkill_exit();
 	return result;
 }
 
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 4ac2311c00a..a2ad53e1587 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -171,7 +171,7 @@ static int hp_wmi_tablet_state(void)
 static int hp_wmi_set_block(void *data, bool blocked)
 {
 	unsigned long b = (unsigned long) data;
-	int query = BIT(b + 8) | ((!!blocked) << b);
+	int query = BIT(b + 8) | ((!blocked) << b);
 
 	return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query);
 }
@@ -520,11 +520,13 @@ static int hp_wmi_resume_handler(struct platform_device *device)
 	 * the input layer will only actually pass it on if the state
 	 * changed.
 	 */
-
-	input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
-	input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
-			    hp_wmi_tablet_state());
-	input_sync(hp_wmi_input_dev);
+	if (hp_wmi_input_dev) {
+		input_report_switch(hp_wmi_input_dev, SW_DOCK,
+				    hp_wmi_dock_state());
+		input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+				    hp_wmi_tablet_state());
+		input_sync(hp_wmi_input_dev);
+	}
 
 	return 0;
 }
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index a463fd72c49..e8560085250 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -239,12 +239,6 @@ struct ibm_init_struct {
 };
 
 static struct {
-#ifdef CONFIG_THINKPAD_ACPI_BAY
-	u32 bay_status:1;
-	u32 bay_eject:1;
-	u32 bay_status2:1;
-	u32 bay_eject2:1;
-#endif
 	u32 bluetooth:1;
 	u32 hotkey:1;
 	u32 hotkey_mask:1;
@@ -589,18 +583,6 @@ static int acpi_ec_write(int i, u8 v)
 	return 1;
 }
 
-#if defined(CONFIG_THINKPAD_ACPI_DOCK) || defined(CONFIG_THINKPAD_ACPI_BAY)
-static int _sta(acpi_handle handle)
-{
-	int status;
-
-	if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
-		status = 0;
-
-	return status;
-}
-#endif
-
 static int issue_thinkpad_cmos_command(int cmos_cmd)
 {
 	if (!cmos_handle)
@@ -784,6 +766,8 @@ static int dispatch_procfs_write(struct file *file,
 
 	if (!ibm || !ibm->write)
 		return -EINVAL;
+	if (count > PAGE_SIZE - 2)
+		return -EINVAL;
 
 	kernbuf = kmalloc(count + 2, GFP_KERNEL);
 	if (!kernbuf)
@@ -4442,293 +4426,6 @@ static struct ibm_struct light_driver_data = {
 };
 
 /*************************************************************************
- * Dock subdriver
- */
-
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
-
-static void dock_notify(struct ibm_struct *ibm, u32 event);
-static int dock_read(char *p);
-static int dock_write(char *buf);
-
-TPACPI_HANDLE(dock, root, "\\_SB.GDCK",	/* X30, X31, X40 */
-	   "\\_SB.PCI0.DOCK",	/* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
-	   "\\_SB.PCI0.PCI1.DOCK",	/* all others */
-	   "\\_SB.PCI.ISA.SLCE",	/* 570 */
-    );				/* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
-
-/* don't list other alternatives as we install a notify handler on the 570 */
-TPACPI_HANDLE(pci, root, "\\_SB.PCI");	/* 570 */
-
-static const struct acpi_device_id ibm_pci_device_ids[] = {
-	{PCI_ROOT_HID_STRING, 0},
-	{"", 0},
-};
-
-static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = {
-	{
-	 .notify = dock_notify,
-	 .handle = &dock_handle,
-	 .type = ACPI_SYSTEM_NOTIFY,
-	},
-	{
-	/* THIS ONE MUST NEVER BE USED FOR DRIVER AUTOLOADING.
-	 * We just use it to get notifications of dock hotplug
-	 * in very old thinkpads */
-	 .hid = ibm_pci_device_ids,
-	 .notify = dock_notify,
-	 .handle = &pci_handle,
-	 .type = ACPI_SYSTEM_NOTIFY,
-	},
-};
-
-static struct ibm_struct dock_driver_data[2] = {
-	{
-	 .name = "dock",
-	 .read = dock_read,
-	 .write = dock_write,
-	 .acpi = &ibm_dock_acpidriver[0],
-	},
-	{
-	 .name = "dock",
-	 .acpi = &ibm_dock_acpidriver[1],
-	},
-};
-
-#define dock_docked() (_sta(dock_handle) & 1)
-
-static int __init dock_init(struct ibm_init_struct *iibm)
-{
-	vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver\n");
-
-	TPACPI_ACPIHANDLE_INIT(dock);
-
-	vdbg_printk(TPACPI_DBG_INIT, "dock is %s\n",
-		str_supported(dock_handle != NULL));
-
-	return (dock_handle)? 0 : 1;
-}
-
-static int __init dock_init2(struct ibm_init_struct *iibm)
-{
-	int dock2_needed;
-
-	vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver part 2\n");
-
-	if (dock_driver_data[0].flags.acpi_driver_registered &&
-	    dock_driver_data[0].flags.acpi_notify_installed) {
-		TPACPI_ACPIHANDLE_INIT(pci);
-		dock2_needed = (pci_handle != NULL);
-		vdbg_printk(TPACPI_DBG_INIT,
-			    "dock PCI handler for the TP 570 is %s\n",
-			    str_supported(dock2_needed));
-	} else {
-		vdbg_printk(TPACPI_DBG_INIT,
-		"dock subdriver part 2 not required\n");
-		dock2_needed = 0;
-	}
-
-	return (dock2_needed)? 0 : 1;
-}
-
-static void dock_notify(struct ibm_struct *ibm, u32 event)
-{
-	int docked = dock_docked();
-	int pci = ibm->acpi->hid && ibm->acpi->device &&
-		acpi_match_device_ids(ibm->acpi->device, ibm_pci_device_ids);
-	int data;
-
-	if (event == 1 && !pci)	/* 570 */
-		data = 1;	/* button */
-	else if (event == 1 && pci)	/* 570 */
-		data = 3;	/* dock */
-	else if (event == 3 && docked)
-		data = 1;	/* button */
-	else if (event == 3 && !docked)
-		data = 2;	/* undock */
-	else if (event == 0 && docked)
-		data = 3;	/* dock */
-	else {
-		printk(TPACPI_ERR "unknown dock event %d, status %d\n",
-		       event, _sta(dock_handle));
-		data = 0;	/* unknown */
-	}
-	acpi_bus_generate_proc_event(ibm->acpi->device, event, data);
-	acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
-					  dev_name(&ibm->acpi->device->dev),
-					  event, data);
-}
-
-static int dock_read(char *p)
-{
-	int len = 0;
-	int docked = dock_docked();
-
-	if (!dock_handle)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else if (!docked)
-		len += sprintf(p + len, "status:\t\tundocked\n");
-	else {
-		len += sprintf(p + len, "status:\t\tdocked\n");
-		len += sprintf(p + len, "commands:\tdock, undock\n");
-	}
-
-	return len;
-}
-
-static int dock_write(char *buf)
-{
-	char *cmd;
-
-	if (!dock_docked())
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "undock") == 0) {
-			if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
-			    !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
-				return -EIO;
-		} else if (strlencmp(cmd, "dock") == 0) {
-			if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
-				return -EIO;
-		} else
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-#endif /* CONFIG_THINKPAD_ACPI_DOCK */
-
-/*************************************************************************
- * Bay subdriver
- */
-
-#ifdef CONFIG_THINKPAD_ACPI_BAY
-
-TPACPI_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST",	/* 570 */
-	   "\\_SB.PCI0.IDE0.IDES.IDSM",	/* 600e/x, 770e, 770x */
-	   "\\_SB.PCI0.SATA.SCND.MSTR",	/* T60, X60, Z60 */
-	   "\\_SB.PCI0.IDE0.SCND.MSTR",	/* all others */
-	   );				/* A21e, R30, R31 */
-TPACPI_HANDLE(bay_ej, bay, "_EJ3",	/* 600e/x, A2xm/p, A3x */
-	   "_EJ0",		/* all others */
-	   );			/* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
-TPACPI_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV",	/* A3x, R32 */
-	   "\\_SB.PCI0.IDE0.IDEP.IDPS",	/* 600e/x, 770e, 770x */
-	   );				/* all others */
-TPACPI_HANDLE(bay2_ej, bay2, "_EJ3",	/* 600e/x, 770e, A3x */
-	   "_EJ0",			/* 770x */
-	   );				/* all others */
-
-static int __init bay_init(struct ibm_init_struct *iibm)
-{
-	vdbg_printk(TPACPI_DBG_INIT, "initializing bay subdriver\n");
-
-	TPACPI_ACPIHANDLE_INIT(bay);
-	if (bay_handle)
-		TPACPI_ACPIHANDLE_INIT(bay_ej);
-	TPACPI_ACPIHANDLE_INIT(bay2);
-	if (bay2_handle)
-		TPACPI_ACPIHANDLE_INIT(bay2_ej);
-
-	tp_features.bay_status = bay_handle &&
-		acpi_evalf(bay_handle, NULL, "_STA", "qv");
-	tp_features.bay_status2 = bay2_handle &&
-		acpi_evalf(bay2_handle, NULL, "_STA", "qv");
-
-	tp_features.bay_eject = bay_handle && bay_ej_handle &&
-		(strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
-	tp_features.bay_eject2 = bay2_handle && bay2_ej_handle &&
-		(strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
-
-	vdbg_printk(TPACPI_DBG_INIT,
-		"bay 1: status %s, eject %s; bay 2: status %s, eject %s\n",
-		str_supported(tp_features.bay_status),
-		str_supported(tp_features.bay_eject),
-		str_supported(tp_features.bay_status2),
-		str_supported(tp_features.bay_eject2));
-
-	return (tp_features.bay_status || tp_features.bay_eject ||
-		tp_features.bay_status2 || tp_features.bay_eject2)? 0 : 1;
-}
-
-static void bay_notify(struct ibm_struct *ibm, u32 event)
-{
-	acpi_bus_generate_proc_event(ibm->acpi->device, event, 0);
-	acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
-					  dev_name(&ibm->acpi->device->dev),
-					  event, 0);
-}
-
-#define bay_occupied(b) (_sta(b##_handle) & 1)
-
-static int bay_read(char *p)
-{
-	int len = 0;
-	int occupied = bay_occupied(bay);
-	int occupied2 = bay_occupied(bay2);
-	int eject, eject2;
-
-	len += sprintf(p + len, "status:\t\t%s\n",
-		tp_features.bay_status ?
-			(occupied ? "occupied" : "unoccupied") :
-				"not supported");
-	if (tp_features.bay_status2)
-		len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
-			       "occupied" : "unoccupied");
-
-	eject = tp_features.bay_eject && occupied;
-	eject2 = tp_features.bay_eject2 && occupied2;
-
-	if (eject && eject2)
-		len += sprintf(p + len, "commands:\teject, eject2\n");
-	else if (eject)
-		len += sprintf(p + len, "commands:\teject\n");
-	else if (eject2)
-		len += sprintf(p + len, "commands:\teject2\n");
-
-	return len;
-}
-
-static int bay_write(char *buf)
-{
-	char *cmd;
-
-	if (!tp_features.bay_eject && !tp_features.bay_eject2)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (tp_features.bay_eject && strlencmp(cmd, "eject") == 0) {
-			if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
-				return -EIO;
-		} else if (tp_features.bay_eject2 &&
-			   strlencmp(cmd, "eject2") == 0) {
-			if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
-				return -EIO;
-		} else
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct tp_acpi_drv_struct ibm_bay_acpidriver = {
-	.notify = bay_notify,
-	.handle = &bay_handle,
-	.type = ACPI_SYSTEM_NOTIFY,
-};
-
-static struct ibm_struct bay_driver_data = {
-	.name = "bay",
-	.read = bay_read,
-	.write = bay_write,
-	.acpi = &ibm_bay_acpidriver,
-};
-
-#endif /* CONFIG_THINKPAD_ACPI_BAY */
-
-/*************************************************************************
  * CMOS subdriver
  */
 
@@ -5945,14 +5642,48 @@ static struct backlight_ops ibm_backlight_data = {
 
 /* --------------------------------------------------------------------- */
 
+/*
+ * These are only useful for models that have only one possibility
+ * of GPU.  If the BIOS model handles both ATI and Intel, don't use
+ * these quirks.
+ */
+#define TPACPI_BRGHT_Q_NOEC	0x0001	/* Must NOT use EC HBRV */
+#define TPACPI_BRGHT_Q_EC	0x0002  /* Should or must use EC HBRV */
+#define TPACPI_BRGHT_Q_ASK	0x8000	/* Ask for user report */
+
+static const struct tpacpi_quirk brightness_quirk_table[] __initconst = {
+	/* Models with ATI GPUs known to require ECNVRAM mode */
+	TPACPI_Q_IBM('1', 'Y', TPACPI_BRGHT_Q_EC),	/* T43/p ATI */
+
+	/* Models with ATI GPUs (waiting confirmation) */
+	TPACPI_Q_IBM('1', 'R', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+	TPACPI_Q_IBM('1', 'Q', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+	TPACPI_Q_IBM('7', '6', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+	TPACPI_Q_IBM('7', '8', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+
+	/* Models with Intel Extreme Graphics 2 (waiting confirmation) */
+	TPACPI_Q_IBM('1', 'V', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+	TPACPI_Q_IBM('1', 'W', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+	TPACPI_Q_IBM('1', 'U', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+
+	/* Models with Intel GMA900 */
+	TPACPI_Q_IBM('7', '0', TPACPI_BRGHT_Q_NOEC),	/* T43, R52 */
+	TPACPI_Q_IBM('7', '4', TPACPI_BRGHT_Q_NOEC),	/* X41 */
+	TPACPI_Q_IBM('7', '5', TPACPI_BRGHT_Q_NOEC),	/* X41 Tablet */
+};
+
 static int __init brightness_init(struct ibm_init_struct *iibm)
 {
 	int b;
+	unsigned long quirks;
 
 	vdbg_printk(TPACPI_DBG_INIT, "initializing brightness subdriver\n");
 
 	mutex_init(&brightness_mutex);
 
+	quirks = tpacpi_check_quirks(brightness_quirk_table,
+				ARRAY_SIZE(brightness_quirk_table));
+
 	/*
 	 * We always attempt to detect acpi support, so as to switch
 	 * Lenovo Vista BIOS to ACPI brightness mode even if we are not
@@ -6009,23 +5740,13 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
 	/* TPACPI_BRGHT_MODE_AUTO not implemented yet, just use default */
 	if (brightness_mode == TPACPI_BRGHT_MODE_AUTO ||
 	    brightness_mode == TPACPI_BRGHT_MODE_MAX) {
-		if (thinkpad_id.vendor == PCI_VENDOR_ID_IBM) {
-			/*
-			 * IBM models that define HBRV probably have
-			 * EC-based backlight level control
-			 */
-			if (acpi_evalf(ec_handle, NULL, "HBRV", "qd"))
-				/* T40-T43, R50-R52, R50e, R51e, X31-X41 */
-				brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM;
-			else
-				/* all other IBM ThinkPads */
-				brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
-		} else
-			/* All Lenovo ThinkPads */
+		if (quirks & TPACPI_BRGHT_Q_EC)
+			brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM;
+		else
 			brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
 
 		dbg_printk(TPACPI_DBG_BRGHT,
-			   "selected brightness_mode=%d\n",
+			   "driver auto-selected brightness_mode=%d\n",
 			   brightness_mode);
 	}
 
@@ -6052,6 +5773,15 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
 			"brightness is supported\n");
 
+	if (quirks & TPACPI_BRGHT_Q_ASK) {
+		printk(TPACPI_NOTICE
+			"brightness: will use unverified default: "
+			"brightness_mode=%d\n", brightness_mode);
+		printk(TPACPI_NOTICE
+			"brightness: please report to %s whether it works well "
+			"or not on your ThinkPad\n", TPACPI_MAIL);
+	}
+
 	ibm_backlight_device->props.max_brightness =
 				(tp_features.bright_16levels)? 15 : 7;
 	ibm_backlight_device->props.brightness = b & TP_EC_BACKLIGHT_LVLMSK;
@@ -7854,22 +7584,6 @@ static struct ibm_init_struct ibms_init[] __initdata = {
 		.init = light_init,
 		.data = &light_driver_data,
 	},
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
-	{
-		.init = dock_init,
-		.data = &dock_driver_data[0],
-	},
-	{
-		.init = dock_init2,
-		.data = &dock_driver_data[1],
-	},
-#endif
-#ifdef CONFIG_THINKPAD_ACPI_BAY
-	{
-		.init = bay_init,
-		.data = &bay_driver_data,
-	},
-#endif
 	{
 		.init = cmos_init,
 		.data = &cmos_driver_data,
@@ -7968,12 +7682,6 @@ TPACPI_PARAM(hotkey);
 TPACPI_PARAM(bluetooth);
 TPACPI_PARAM(video);
 TPACPI_PARAM(light);
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
-TPACPI_PARAM(dock);
-#endif
-#ifdef CONFIG_THINKPAD_ACPI_BAY
-TPACPI_PARAM(bay);
-#endif /* CONFIG_THINKPAD_ACPI_BAY */
 TPACPI_PARAM(cmos);
 TPACPI_PARAM(led);
 TPACPI_PARAM(beep);
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 81d31ea507d..51c0a8bee41 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -335,6 +335,7 @@ static void bt_rfkill_poll(struct rfkill *rfkill, void *data)
 	if (hci_result != HCI_SUCCESS) {
 		/* Can't do anything useful */
 		mutex_unlock(&dev->mutex);
+		return;
 	}
 
 	new_rfk_state = value;
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 043b208d971..f215a591919 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -270,7 +270,7 @@ u32 method_id, const struct acpi_buffer *in, struct acpi_buffer *out)
 	acpi_status status;
 	struct acpi_object_list input;
 	union acpi_object params[3];
-	char method[4] = "WM";
+	char method[5] = "WM";
 
 	if (!find_guid(guid_string, &wblock))
 		return AE_ERROR;
@@ -328,8 +328,8 @@ struct acpi_buffer *out)
 	acpi_status status, wc_status = AE_ERROR;
 	struct acpi_object_list input, wc_input;
 	union acpi_object wc_params[1], wq_params[1];
-	char method[4];
-	char wc_method[4] = "WC";
+	char method[5];
+	char wc_method[5] = "WC";
 
 	if (!guid_string || !out)
 		return AE_BAD_PARAMETER;
@@ -410,7 +410,7 @@ const struct acpi_buffer *in)
 	acpi_handle handle;
 	struct acpi_object_list input;
 	union acpi_object params[2];
-	char method[4] = "WS";
+	char method[5] = "WS";
 
 	if (!guid_string || !in)
 		return AE_BAD_DATA;
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 7eda34838bf..2acfcd12e48 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -43,6 +43,13 @@ config BATTERY_DS2760
 	help
 	  Say Y here to enable support for batteries with ds2760 chip.
 
+config BATTERY_DS2782
+	tristate "DS2782 standalone gas-gauge"
+	depends on I2C
+	help
+	  Say Y here to enable support for the DS2782 standalone battery
+	  gas-gauge.
+
 config BATTERY_PMU
 	tristate "Apple PMU battery"
 	depends on PPC32 && ADB_PMU
@@ -96,4 +103,16 @@ config CHARGER_PCF50633
 	help
 	 Say Y to include support for NXP PCF50633 Main Battery Charger.
 
+config BATTERY_BQ27000_HDQ
+	tristate "BQ27000 HDQ battery monitor driver"
+	help
+	  Say Y to enable support for the battery on the Neo Freerunner
+
+config HDQ_GPIO_BITBANG
+	bool "Generic gpio based HDQ bitbang"
+	help
+	  Say Y to enable supoort for generic gpio based HDQ bitbang driver.
+	  This can not be built as a module.
+
 endif # POWER_SUPPLY
+
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index daf3179689a..027ee9fdbcd 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_APM_POWER)		+= apm_power.o
 obj-$(CONFIG_WM8350_POWER)	+= wm8350_power.o
 
 obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
+obj-$(CONFIG_BATTERY_DS2782)	+= ds2782_battery.o
 obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
 obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o
@@ -27,3 +28,6 @@ obj-$(CONFIG_BATTERY_BQ27x00)	+= bq27x00_battery.o
 obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
 obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
 obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
+obj-$(CONFIG_BATTERY_BQ27000_HDQ)	+= bq27000_battery.o
+
+obj-$(CONFIG_HDQ_GPIO_BITBANG)  += hdq.o
diff --git a/drivers/power/bq27000_battery.c b/drivers/power/bq27000_battery.c
new file mode 100644
index 00000000000..32655dce1f3
--- /dev/null
+++ b/drivers/power/bq27000_battery.c
@@ -0,0 +1,477 @@
+/*
+ * Driver for batteries with bq27000 chips inside via HDQ
+ *
+ * Copyright 2008 Openmoko, Inc
+ * Andy Green <andy@openmoko.com>
+ *
+ * based on ds2760 driver, original copyright notice for that --->
+ *
+ * Copyright © 2007 Anton Vorontsov
+ *	       2004-2007 Matt Reimer
+ *	       2004 Szabolcs Gyurko
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * Author:  Anton Vorontsov <cbou@mail.ru>
+ *	    February 2007
+ *
+ *	    Matt Reimer <mreimer@vpop.net>
+ *	    April 2004, 2005, 2007
+ *
+ *	    Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
+ *	    September 2004
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/bq27000_battery.h>
+
+enum bq27000_regs {
+	/* RAM regs */
+		/* read-write after this */
+	BQ27000_CTRL = 0, /* Device Control Register */
+	BQ27000_MODE, /* Device Mode Register */
+	BQ27000_AR_L, /* At-Rate H L */
+	BQ27000_AR_H,
+		/* read-only after this */
+	BQ27000_ARTTE_L, /* At-Rate Time To Empty H L */
+	BQ27000_ARTTE_H,
+	BQ27000_TEMP_L, /* Reported Temperature H L */
+	BQ27000_TEMP_H,
+	BQ27000_VOLT_L, /* Reported Voltage H L */
+	BQ27000_VOLT_H,
+	BQ27000_FLAGS, /* Status Flags */
+	BQ27000_RSOC, /* Relative State of Charge */
+	BQ27000_NAC_L, /* Nominal Available Capacity H L */
+	BQ27000_NAC_H,
+	BQ27000_CACD_L, /* Discharge Compensated H L */
+	BQ27000_CACD_H,
+	BQ27000_CACT_L, /* Temperature Compensated H L */
+	BQ27000_CACT_H,
+	BQ27000_LMD_L, /* Last measured discharge H L */
+	BQ27000_LMD_H,
+	BQ27000_AI_L, /* Average Current H L */
+	BQ27000_AI_H,
+	BQ27000_TTE_L, /* Time to Empty H L */
+	BQ27000_TTE_H,
+	BQ27000_TTF_L, /* Time to Full H L */
+	BQ27000_TTF_H,
+	BQ27000_SI_L, /* Standby Current H L */
+	BQ27000_SI_H,
+	BQ27000_STTE_L, /* Standby Time To Empty H L */
+	BQ27000_STTE_H,
+	BQ27000_MLI_L, /* Max Load Current H L */
+	BQ27000_MLI_H,
+	BQ27000_MLTTE_L, /* Max Load Time To Empty H L */
+	BQ27000_MLTTE_H,
+	BQ27000_SAE_L, /* Available Energy H L */
+	BQ27000_SAE_H,
+	BQ27000_AP_L, /* Available Power H L */
+	BQ27000_AP_H,
+	BQ27000_TTECP_L, /* Time to Empty at Constant Power H L */
+	BQ27000_TTECP_H,
+	BQ27000_CYCL_L, /* Cycle count since learning cycle H L */
+	BQ27000_CYCL_H,
+	BQ27000_CYCT_L, /* Cycle Count Total H L */
+	BQ27000_CYCT_H,
+	BQ27000_CSOC, /* Compensated State Of Charge */
+	/* EEPROM regs */
+		/* read-write after this */
+	BQ27000_EE_EE_EN = 0x6e, /* EEPROM Program Enable */
+	BQ27000_EE_ILMD = 0x76, /* Initial Last Measured Discharge High Byte */
+	BQ27000_EE_SEDVF, /* Scaled EDVF Threshold */
+	BQ27000_EE_SEDV1, /* Scaled EDV1 Threshold */
+	BQ27000_EE_ISLC, /* Initial Standby Load Current */
+	BQ27000_EE_DMFSD, /* Digital Magnitude Filter and Self Discharge */
+	BQ27000_EE_TAPER, /* Aging Estimate Enable, Charge Termination Taper */
+	BQ27000_EE_PKCFG, /* Pack Configuration Values */
+	BQ27000_EE_IMLC, /* Initial Max Load Current or ID #3 */
+	BQ27000_EE_DCOMP, /* Discharge rate compensation constants or ID #2 */
+	BQ27000_EE_TCOMP, /* Temperature Compensation constants or ID #1 */
+};
+
+enum bq27000_status_flags {
+	BQ27000_STATUS_CHGS = 0x80, /* 1 = being charged */
+	BQ27000_STATUS_NOACT = 0x40, /* 1 = no activity */
+	BQ27000_STATUS_IMIN = 0x20, /* 1 = Lion taper current mode */
+	BQ27000_STATUS_CI = 0x10, /* 1 = capacity likely  innacurate */
+	BQ27000_STATUS_CALIP = 0x08, /* 1 = calibration in progress */
+	BQ27000_STATUS_VDQ = 0x04, /* 1 = capacity should be accurate */
+	BQ27000_STATUS_EDV1 = 0x02, /* 1 = end of discharge.. <6% left */
+	BQ27000_STATUS_EDVF = 0x01, /* 1 = no, it's really empty now */
+};
+
+#define NANOVOLTS_UNIT 3750
+
+struct bq27000_bat_regs {
+	int		ai;
+	int		flags;
+	int		lmd;
+	int		rsoc;
+	int		temp;
+	int		tte;
+	int		ttf;
+	int		volt;
+};
+
+struct bq27000_device_info {
+	struct device *dev;
+	struct power_supply bat;
+	struct power_supply ac;
+	struct power_supply usb;
+	struct delayed_work work;
+	struct bq27000_platform_data *pdata;
+
+	struct bq27000_bat_regs regs;
+};
+
+static unsigned int cache_time = 5000;
+module_param(cache_time, uint, 0644);
+MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+
+/*
+ * reading 16 bit values over HDQ has a special hazard where the
+ * hdq device firmware can update the 16-bit register during the time we
+ * read the two halves.  TI document SLUS556D recommends the algorithm here
+ * to avoid trouble
+ */
+
+static int hdq_read16(struct bq27000_device_info *di, int address)
+{
+	int acc;
+	int high;
+	int retries = 3;
+
+	while (retries--) {
+
+		high = (di->pdata->hdq_read)(address + 1); /* high part */
+
+		if (high < 0)
+			return high;
+		acc = (di->pdata->hdq_read)(address);
+		if (acc < 0)
+			return acc;
+
+		/* confirm high didn't change between reading it and low */
+		if (high == (di->pdata->hdq_read)(address + 1))
+			return (high << 8) | acc;
+	}
+
+	return -ETIME;
+}
+
+static void bq27000_battery_external_power_changed(struct power_supply *psy)
+{
+	struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat);
+
+	dev_dbg(di->dev, "%s\n", __FUNCTION__);
+	schedule_delayed_work(&di->work, 0);
+}
+
+static int bq27000_battery_get_property(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       union power_supply_propval *val)
+{
+	int n;
+	struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat);
+
+	if (di->regs.rsoc < 0 && psp != POWER_SUPPLY_PROP_PRESENT)
+		return -ENODEV;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+		if (!di->pdata->get_charger_online_status)
+			goto use_bat;
+		if ((di->pdata->get_charger_online_status)()) {
+			/*
+			 * charger is definitively present
+			 * we report our state in terms of what it says it
+			 * is doing
+			 */
+			if (!di->pdata->get_charger_active_status)
+				goto use_bat;
+
+			if ((di->pdata->get_charger_active_status)()) {
+				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+				break;
+			}
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		}
+
+		/*
+		 * platform provided definite indication of charger presence,
+		 * and it is telling us it isn't there... but we are on so we
+		 * must be running from battery --->
+		 */
+
+		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+
+use_bat:
+		/*
+		 * either the charger is not connected, or the
+		 * platform doesn't give info about charger, use battery state
+		 * but... battery state can be out of date by 4 seconds or
+		 * so... use the platform callbacks if possible.
+		 */
+
+		/* no real activity on the battery */
+		if (di->regs.ai < 2) {
+			if (!di->regs.ttf)
+				val->intval = POWER_SUPPLY_STATUS_FULL;
+			else
+				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		}
+		/* power is actually going in or out... */
+		if (di->regs.flags < 0)
+			return di->regs.flags;
+		if (di->regs.flags & BQ27000_STATUS_CHGS)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+		/* Do we have accurate readings... */
+		if (di->regs.flags < 0)
+			return di->regs.flags;
+		if (di->regs.flags & BQ27000_STATUS_VDQ)
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (di->regs.volt < 0)
+			return di->regs.volt;
+		/* mV -> uV */
+		val->intval = di->regs.volt * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (di->regs.flags < 0)
+			return di->regs.flags;
+		if (di->regs.flags & BQ27000_STATUS_CHGS)
+			n = -NANOVOLTS_UNIT;
+		else
+			n = NANOVOLTS_UNIT;
+		if (di->regs.ai < 0)
+			return di->regs.ai;
+		val->intval = (di->regs.ai * n) / di->pdata->rsense_mohms;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		if (di->regs.lmd < 0)
+			return di->regs.lmd;
+		val->intval = (di->regs.lmd * 3570) / di->pdata->rsense_mohms;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		if (di->regs.temp < 0)
+			return di->regs.temp;
+		/* K (in 0.25K units) is 273.15 up from C (in 0.1C)*/
+		/* 10926 = 27315 * 4 / 10 */
+		val->intval = (((long)di->regs.temp * 10l) - 10926) / 4;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = di->regs.rsoc;
+		if (val->intval < 0)
+			return val->intval;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = !(di->regs.rsoc < 0);
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+		if (di->regs.tte < 0)
+			return di->regs.tte;
+		val->intval = 60 * di->regs.tte;
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+		if (di->regs.ttf < 0)
+			return di->regs.ttf;
+		val->intval = 60 * di->regs.ttf;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		if (di->pdata->get_charger_online_status)
+			val->intval = (di->pdata->get_charger_online_status)();
+		else
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void bq27000_battery_work(struct work_struct *work)
+{
+	struct bq27000_device_info *di =
+		container_of(work, struct bq27000_device_info, work.work);
+
+	if ((di->pdata->hdq_initialized)()) {
+		struct bq27000_bat_regs regs;
+
+		regs.ai    = hdq_read16(di, BQ27000_AI_L);
+		regs.flags = (di->pdata->hdq_read)(BQ27000_FLAGS);
+		regs.lmd   = hdq_read16(di, BQ27000_LMD_L);
+		regs.rsoc  = (di->pdata->hdq_read)(BQ27000_RSOC);
+		regs.temp  = hdq_read16(di, BQ27000_TEMP_L);
+		regs.tte   = hdq_read16(di, BQ27000_TTE_L);
+		regs.ttf   = hdq_read16(di, BQ27000_TTF_L);
+		regs.volt  = hdq_read16(di, BQ27000_VOLT_L);
+
+		if (memcmp (&regs, &di->regs, sizeof(regs)) != 0) {
+			di->regs = regs;
+			power_supply_changed(&di->bat);
+		}
+	}
+
+	if (!schedule_delayed_work(&di->work, cache_time))
+		dev_err(di->dev, "battery service reschedule failed\n");
+}
+
+static enum power_supply_property bq27000_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_ONLINE
+};
+
+static int bq27000_battery_probe(struct platform_device *pdev)
+{
+	int retval = 0;
+	struct bq27000_device_info *di;
+	struct bq27000_platform_data *pdata;
+
+	dev_info(&pdev->dev, "BQ27000 Battery Driver (C) 2008 Openmoko, Inc\n");
+
+	di = kzalloc(sizeof(*di), GFP_KERNEL);
+	if (!di) {
+		retval = -ENOMEM;
+		goto di_alloc_failed;
+	}
+
+	platform_set_drvdata(pdev, di);
+
+	pdata = pdev->dev.platform_data;
+	di->dev		= &pdev->dev;
+	/* di->w1_dev	     = pdev->dev.parent; */
+	di->bat.name	   = pdata->name;
+	di->bat.type	   = POWER_SUPPLY_TYPE_BATTERY;
+	di->bat.properties     = bq27000_battery_props;
+	di->bat.num_properties = ARRAY_SIZE(bq27000_battery_props);
+	di->bat.get_property   = bq27000_battery_get_property;
+	di->bat.external_power_changed =
+				  bq27000_battery_external_power_changed;
+	di->bat.use_for_apm = 1;
+	di->pdata = pdata;
+
+	retval = power_supply_register(&pdev->dev, &di->bat);
+	if (retval) {
+		dev_err(di->dev, "failed to register battery\n");
+		goto batt_failed;
+	}
+
+	INIT_DELAYED_WORK(&di->work, bq27000_battery_work);
+
+	if (!schedule_delayed_work(&di->work, 0))
+		dev_err(di->dev, "failed to schedule bq27000_battery_work\n");
+
+	return 0;
+
+batt_failed:
+	kfree(di);
+di_alloc_failed:
+	return retval;
+}
+
+static int bq27000_battery_remove(struct platform_device *pdev)
+{
+	struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+	cancel_delayed_work(&di->work);
+
+	power_supply_unregister(&di->bat);
+
+	return 0;
+}
+
+void bq27000_charging_state_change(struct platform_device *pdev)
+{
+	struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+	if (!di)
+	    return;
+}
+EXPORT_SYMBOL_GPL(bq27000_charging_state_change);
+
+#ifdef CONFIG_PM
+
+static int bq27000_battery_suspend(struct platform_device *pdev,
+				  pm_message_t state)
+{
+	struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+	cancel_delayed_work(&di->work);
+	return 0;
+}
+
+static int bq27000_battery_resume(struct platform_device *pdev)
+{
+	struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+	schedule_delayed_work(&di->work, 0);
+	return 0;
+}
+
+#else
+
+#define bq27000_battery_suspend NULL
+#define bq27000_battery_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct platform_driver bq27000_battery_driver = {
+	.driver = {
+		.name = "bq27000-battery",
+	},
+	.probe	  = bq27000_battery_probe,
+	.remove   = bq27000_battery_remove,
+	.suspend  = bq27000_battery_suspend,
+	.resume	  = bq27000_battery_resume,
+};
+
+static int __init bq27000_battery_init(void)
+{
+	return platform_driver_register(&bq27000_battery_driver);
+}
+
+static void __exit bq27000_battery_exit(void)
+{
+	platform_driver_unregister(&bq27000_battery_driver);
+}
+
+module_init(bq27000_battery_init);
+module_exit(bq27000_battery_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("bq27000 battery driver");
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
new file mode 100644
index 00000000000..da14f374cb6
--- /dev/null
+++ b/drivers/power/ds2782_battery.c
@@ -0,0 +1,330 @@
+/*
+ * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ *
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/swab.h>
+#include <linux/i2c.h>
+#include <linux/idr.h>
+#include <linux/power_supply.h>
+
+#define DS2782_REG_RARC		0x06	/* Remaining active relative capacity */
+
+#define DS2782_REG_VOLT_MSB	0x0c
+#define DS2782_REG_TEMP_MSB	0x0a
+#define DS2782_REG_CURRENT_MSB	0x0e
+
+/* EEPROM Block */
+#define DS2782_REG_RSNSP	0x69	/* Sense resistor value */
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2782_CURRENT_UNITS	1563
+
+#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery)
+
+struct ds2782_info {
+	struct i2c_client	*client;
+	struct power_supply	battery;
+	int			id;
+};
+
+static DEFINE_IDR(battery_id);
+static DEFINE_MUTEX(battery_lock);
+
+static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(info->client, reg);
+	if (ret < 0) {
+		dev_err(&info->client->dev, "register read failed\n");
+		return ret;
+	}
+
+	*val = ret;
+	return 0;
+}
+
+static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb,
+				    s16 *val)
+{
+	int ret;
+
+	ret = swab16(i2c_smbus_read_word_data(info->client, reg_msb));
+	if (ret < 0) {
+		dev_err(&info->client->dev, "register read failed\n");
+		return ret;
+	}
+
+	*val = ret;
+	return 0;
+}
+
+static int ds2782_get_temp(struct ds2782_info *info, int *temp)
+{
+	s16 raw;
+	int err;
+
+	/*
+	 * Temperature is measured in units of 0.125 degrees celcius, the
+	 * power_supply class measures temperature in tenths of degrees
+	 * celsius. The temperature value is stored as a 10 bit number, plus
+	 * sign in the upper bits of a 16 bit register.
+	 */
+	err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw);
+	if (err)
+		return err;
+	*temp = ((raw / 32) * 125) / 100;
+	return 0;
+}
+
+static int ds2782_get_current(struct ds2782_info *info, int *current_uA)
+{
+	int sense_res;
+	int err;
+	u8 sense_res_raw;
+	s16 raw;
+
+	/*
+	 * The units of measurement for current are dependent on the value of
+	 * the sense resistor.
+	 */
+	err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
+	if (err)
+		return err;
+	if (sense_res_raw == 0) {
+		dev_err(&info->client->dev, "sense resistor value is 0\n");
+		return -ENXIO;
+	}
+	sense_res = 1000 / sense_res_raw;
+
+	dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
+		sense_res);
+	err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw);
+	if (err)
+		return err;
+	*current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
+	return 0;
+}
+
+static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA)
+{
+	s16 raw;
+	int err;
+
+	/*
+	 * Voltage is measured in units of 4.88mV. The voltage is stored as
+	 * a 10-bit number plus sign, in the upper bits of a 16-bit register
+	 */
+	err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw);
+	if (err)
+		return err;
+	*voltage_uA = (raw / 32) * 4800;
+	return 0;
+}
+
+static int ds2782_get_capacity(struct ds2782_info *info, int *capacity)
+{
+	int err;
+	u8 raw;
+
+	err = ds2782_read_reg(info, DS2782_REG_RARC, &raw);
+	if (err)
+		return err;
+	*capacity = raw;
+	return raw;
+}
+
+static int ds2782_get_status(struct ds2782_info *info, int *status)
+{
+	int err;
+	int current_uA;
+	int capacity;
+
+	err = ds2782_get_current(info, &current_uA);
+	if (err)
+		return err;
+
+	err = ds2782_get_capacity(info, &capacity);
+	if (err)
+		return err;
+
+	if (capacity == 100)
+		*status = POWER_SUPPLY_STATUS_FULL;
+	else if (current_uA == 0)
+		*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	else if (current_uA < 0)
+		*status = POWER_SUPPLY_STATUS_DISCHARGING;
+	else
+		*status = POWER_SUPPLY_STATUS_CHARGING;
+
+	return 0;
+}
+
+static int ds2782_battery_get_property(struct power_supply *psy,
+				       enum power_supply_property prop,
+				       union power_supply_propval *val)
+{
+	struct ds2782_info *info = to_ds2782_info(psy);
+	int ret;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = ds2782_get_status(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = ds2782_get_capacity(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = ds2782_get_voltage(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = ds2782_get_current(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = ds2782_get_temp(info, &val->intval);
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property ds2782_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static void ds2782_power_supply_init(struct power_supply *battery)
+{
+	battery->type			= POWER_SUPPLY_TYPE_BATTERY;
+	battery->properties		= ds2782_battery_props;
+	battery->num_properties		= ARRAY_SIZE(ds2782_battery_props);
+	battery->get_property		= ds2782_battery_get_property;
+	battery->external_power_changed	= NULL;
+}
+
+static int ds2782_battery_remove(struct i2c_client *client)
+{
+	struct ds2782_info *info = i2c_get_clientdata(client);
+
+	power_supply_unregister(&info->battery);
+	kfree(info->battery.name);
+
+	mutex_lock(&battery_lock);
+	idr_remove(&battery_id, info->id);
+	mutex_unlock(&battery_lock);
+
+	i2c_set_clientdata(client, info);
+
+	kfree(info);
+	return 0;
+}
+
+static int ds2782_battery_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct ds2782_info *info;
+	int ret;
+	int num;
+
+	/* Get an ID for this battery */
+	ret = idr_pre_get(&battery_id, GFP_KERNEL);
+	if (ret == 0) {
+		ret = -ENOMEM;
+		goto fail_id;
+	}
+
+	mutex_lock(&battery_lock);
+	ret = idr_get_new(&battery_id, client, &num);
+	mutex_unlock(&battery_lock);
+	if (ret < 0)
+		goto fail_id;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		ret = -ENOMEM;
+		goto fail_info;
+	}
+
+	info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num);
+	if (!info->battery.name) {
+		ret = -ENOMEM;
+		goto fail_name;
+	}
+
+	i2c_set_clientdata(client, info);
+	info->client = client;
+	ds2782_power_supply_init(&info->battery);
+
+	ret = power_supply_register(&client->dev, &info->battery);
+	if (ret) {
+		dev_err(&client->dev, "failed to register battery\n");
+		goto fail_register;
+	}
+
+	return 0;
+
+fail_register:
+	kfree(info->battery.name);
+fail_name:
+	i2c_set_clientdata(client, info);
+	kfree(info);
+fail_info:
+	mutex_lock(&battery_lock);
+	idr_remove(&battery_id, num);
+	mutex_unlock(&battery_lock);
+fail_id:
+	return ret;
+}
+
+static const struct i2c_device_id ds2782_id[] = {
+	{"ds2782", 0},
+	{},
+};
+
+static struct i2c_driver ds2782_battery_driver = {
+	.driver 	= {
+		.name	= "ds2782-battery",
+	},
+	.probe		= ds2782_battery_probe,
+	.remove		= ds2782_battery_remove,
+	.id_table	= ds2782_id,
+};
+
+static int __init ds2782_init(void)
+{
+	return i2c_add_driver(&ds2782_battery_driver);
+}
+module_init(ds2782_init);
+
+static void __exit ds2782_exit(void)
+{
+	i2c_del_driver(&ds2782_battery_driver);
+}
+module_exit(ds2782_exit);
+
+MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/hdq.c b/drivers/power/hdq.c
new file mode 100644
index 00000000000..f03fabfb1aa
--- /dev/null
+++ b/drivers/power/hdq.c
@@ -0,0 +1,515 @@
+/*
+ * HDQ generic GPIO bitbang driver using FIQ
+ *
+ * (C) 2006-2007 by Openmoko, Inc.
+ * Author: Andy Green <andy@openmoko.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/hdq.h>
+
+#define HDQ_READ 0
+#define HDQ_WRITE 0x80
+
+enum hdq_bitbang_states {
+	HDQB_IDLE = 0,
+	HDQB_TX_BREAK,
+	HDQB_TX_BREAK_RECOVERY,
+	HDQB_ADS_CALC,
+	HDQB_ADS_LOW,
+	HDQB_ADS_HIGH,
+	HDQB_WAIT_RX,
+	HDQB_DATA_RX_LOW,
+	HDQB_DATA_RX_HIGH,
+	HDQB_WAIT_TX,
+};
+
+static struct hdq_priv {
+	u8 hdq_probed; /* nonzero after HDQ driver probed */
+	struct mutex hdq_lock; /* if you want to use hdq, you have to take lock */
+	unsigned long hdq_gpio_pin; /* GTA02 = GPD14 which pin to meddle with */
+	u8 hdq_ads; /* b7..b6 = register address, b0 = r/w */
+	u8 hdq_tx_data; /* data to tx for write action */
+	u8 hdq_rx_data; /* data received in read action */
+	u8 hdq_request_ctr; /* incremented by "user" to request a transfer */
+	u8 hdq_transaction_ctr; /* incremented after each transfer */
+	u8 hdq_error; /* 0 = no error */
+	u8 hdq_ctr;
+	u8 hdq_ctr2;
+	u8 hdq_bit;
+	u8 hdq_shifter;
+	u8 hdq_tx_data_done;
+	enum hdq_bitbang_states hdq_state;
+	int reported_error;
+
+	struct hdq_platform_data *pdata;
+} hdq_priv;
+
+
+static void hdq_bad(void)
+{
+	if (!hdq_priv.reported_error)
+		printk(KERN_ERR "HDQ error: %d\n", hdq_priv.hdq_error);
+	hdq_priv.reported_error = 1;
+}
+
+static void hdq_good(void)
+{
+	if (hdq_priv.reported_error)
+		printk(KERN_INFO "HDQ responds again\n");
+	hdq_priv.reported_error = 0;
+}
+
+int hdq_fiq_handler(void)
+{
+	if (!hdq_priv.hdq_probed)
+		return 0;
+
+	switch (hdq_priv.hdq_state) {
+	case HDQB_IDLE:
+		if (hdq_priv.hdq_request_ctr == hdq_priv.hdq_transaction_ctr)
+			break;
+		hdq_priv.hdq_ctr = 250 / HDQ_SAMPLE_PERIOD_US;
+		hdq_priv.pdata->gpio_set(0);
+		hdq_priv.pdata->gpio_dir_out();
+		hdq_priv.hdq_tx_data_done = 0;
+		hdq_priv.hdq_state = HDQB_TX_BREAK;
+		break;
+
+	case HDQB_TX_BREAK: /* issue low for > 190us */
+		if (--hdq_priv.hdq_ctr == 0) {
+			hdq_priv.hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US;
+			hdq_priv.hdq_state = HDQB_TX_BREAK_RECOVERY;
+			hdq_priv.pdata->gpio_set(1);
+		}
+		break;
+
+	case HDQB_TX_BREAK_RECOVERY: /* issue low for > 40us */
+		if (--hdq_priv.hdq_ctr)
+			break;
+		hdq_priv.hdq_shifter = hdq_priv.hdq_ads;
+		hdq_priv.hdq_bit = 8; /* 8 bits of ads / rw */
+		hdq_priv.hdq_tx_data_done = 0; /* doing ads */
+		/* fallthru on last one */
+	case HDQB_ADS_CALC:
+		if (hdq_priv.hdq_shifter & 1)
+			hdq_priv.hdq_ctr = 50 / HDQ_SAMPLE_PERIOD_US;
+		else
+			hdq_priv.hdq_ctr = 120 / HDQ_SAMPLE_PERIOD_US;
+		/* carefully precompute the other phase length */
+		hdq_priv.hdq_ctr2 = (210 - (hdq_priv.hdq_ctr * HDQ_SAMPLE_PERIOD_US)) /
+				HDQ_SAMPLE_PERIOD_US;
+		hdq_priv.hdq_state = HDQB_ADS_LOW;
+		hdq_priv.hdq_shifter >>= 1;
+		hdq_priv.hdq_bit--;
+		hdq_priv.pdata->gpio_set(0);
+		break;
+
+	case HDQB_ADS_LOW:
+		if (--hdq_priv.hdq_ctr)
+			break;
+		hdq_priv.pdata->gpio_set(1);
+		hdq_priv.hdq_state = HDQB_ADS_HIGH;
+		break;
+
+	case HDQB_ADS_HIGH:
+		if (--hdq_priv.hdq_ctr2 > 1) /* account for HDQB_ADS_CALC */
+			break;
+		if (hdq_priv.hdq_bit) { /* more bits to do */
+			hdq_priv.hdq_state = HDQB_ADS_CALC;
+			break;
+		}
+		/* no more bits, wait it out until hdq_priv.hdq_ctr2 exhausted */
+		if (hdq_priv.hdq_ctr2)
+			break;
+		/* ok no more bits and very last state */
+		hdq_priv.hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US;
+		/* FIXME 0 = read */
+		if (hdq_priv.hdq_ads & 0x80) { /* write the byte out */
+			 /* set delay before payload */
+			hdq_priv.hdq_ctr = 300 / HDQ_SAMPLE_PERIOD_US;
+ 			/* already high, no need to write */
+			hdq_priv.hdq_state = HDQB_WAIT_TX;
+			break;
+		}
+		/* read the next byte */
+		hdq_priv.hdq_bit = 8; /* 8 bits of data */
+		hdq_priv.hdq_ctr = 2500 / HDQ_SAMPLE_PERIOD_US;
+		hdq_priv.hdq_state = HDQB_WAIT_RX;
+		hdq_priv.pdata->gpio_dir_in();
+		break;
+
+	case HDQB_WAIT_TX: /* issue low for > 40us */
+		if (--hdq_priv.hdq_ctr)
+			break;
+		if (!hdq_priv.hdq_tx_data_done) { /* was that the data sent? */
+			hdq_priv.hdq_tx_data_done++;
+			hdq_priv.hdq_shifter = hdq_priv.hdq_tx_data;
+			hdq_priv.hdq_bit = 8; /* 8 bits of data */
+			hdq_priv.hdq_state = HDQB_ADS_CALC; /* start sending */
+			break;
+		}
+		hdq_priv.hdq_error = 0;
+		hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+		hdq_priv.hdq_state = HDQB_IDLE; /* all tx is done */
+		/* idle in input mode, it's pulled up by 10K */
+		hdq_priv.pdata->gpio_dir_in();
+		break;
+
+	case HDQB_WAIT_RX: /* wait for battery to talk to us */
+		if (hdq_priv.pdata->gpio_get() == 0) {
+			/* it talks to us! */
+			hdq_priv.hdq_ctr2 = 1;
+			hdq_priv.hdq_bit = 8; /* 8 bits of data */
+			/* timeout */
+			hdq_priv.hdq_ctr = 500 / HDQ_SAMPLE_PERIOD_US;
+			hdq_priv.hdq_state = HDQB_DATA_RX_LOW;
+			break;
+		}
+		if (--hdq_priv.hdq_ctr == 0) { /* timed out, error */
+			hdq_priv.hdq_error = 1;
+			hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+			hdq_priv.hdq_state = HDQB_IDLE; /* abort */
+		}
+		break;
+
+	/*
+	 * HDQ basically works by measuring the low time of the bit cell
+	 * 32-50us --> '1', 80 - 145us --> '0'
+	 */
+
+	case HDQB_DATA_RX_LOW:
+		if (hdq_priv.pdata->gpio_get()) {
+			hdq_priv.hdq_rx_data >>= 1;
+			if (hdq_priv.hdq_ctr2 <= (65 / HDQ_SAMPLE_PERIOD_US))
+				hdq_priv.hdq_rx_data |= 0x80;
+
+			if (--hdq_priv.hdq_bit == 0) {
+				hdq_priv.hdq_error = 0;
+				hdq_priv.hdq_transaction_ctr =
+							hdq_priv.hdq_request_ctr;
+
+				hdq_priv.hdq_state = HDQB_IDLE;
+			} else
+				hdq_priv.hdq_state = HDQB_DATA_RX_HIGH;
+			/* timeout */
+			hdq_priv.hdq_ctr = 1000 / HDQ_SAMPLE_PERIOD_US;
+			hdq_priv.hdq_ctr2 = 1;
+			break;
+		}
+		hdq_priv.hdq_ctr2++;
+		if (--hdq_priv.hdq_ctr)
+			break;
+		 /* timed out, error */
+		hdq_priv.hdq_error = 2;
+		hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+		hdq_priv.hdq_state = HDQB_IDLE; /* abort */
+		break;
+
+	case HDQB_DATA_RX_HIGH:
+		if (!hdq_priv.pdata->gpio_get()) {
+			/* it talks to us! */
+			hdq_priv.hdq_ctr2 = 1;
+			/* timeout */
+			hdq_priv.hdq_ctr = 400 / HDQ_SAMPLE_PERIOD_US;
+			hdq_priv.hdq_state = HDQB_DATA_RX_LOW;
+			break;
+		}
+		if (--hdq_priv.hdq_ctr)
+			break;
+		/* timed out, error */
+		hdq_priv.hdq_error = 3;
+		hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+
+		/* we're in input mode already */
+		hdq_priv.hdq_state = HDQB_IDLE; /* abort */
+		break;
+	}
+
+	/* Are we interested in keeping the FIQ source alive ? */
+	if (hdq_priv.hdq_state != HDQB_IDLE)
+		return 1;
+	else
+		return 0;
+}
+static int fiq_busy(void)
+{
+	int request = (volatile u8)hdq_priv.hdq_request_ctr;
+	int transact = (volatile u8)hdq_priv.hdq_transaction_ctr;
+
+
+	return (request != transact);
+}
+
+int hdq_initialized(void)
+{
+	return hdq_priv.hdq_probed;
+}
+EXPORT_SYMBOL_GPL(hdq_initialized);
+
+int hdq_read(int address)
+{
+	int count_sleeps = 5;
+	int ret = -ETIME;
+
+	if (!hdq_priv.hdq_probed)
+		return -EINVAL;
+
+	mutex_lock(&hdq_priv.hdq_lock);
+
+	hdq_priv.hdq_error = 0;
+	hdq_priv.hdq_ads = address | HDQ_READ;
+	hdq_priv.hdq_request_ctr++;
+	hdq_priv.pdata->kick_fiq();
+	/*
+	 * FIQ takes care of it while we block our calling process
+	 * But we're not spinning -- other processes run normally while
+	 * we wait for the result
+	 */
+	while (count_sleeps--) {
+		msleep(10); /* valid transaction always completes in < 10ms */
+
+		if (fiq_busy())
+			continue;
+
+		if (hdq_priv.hdq_error) {
+			hdq_bad();
+			goto done; /* didn't see a response in good time */
+		}
+		hdq_good();
+
+		ret = hdq_priv.hdq_rx_data;
+		goto done;
+	}
+
+done:
+	mutex_unlock(&hdq_priv.hdq_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(hdq_read);
+
+int hdq_write(int address, u8 data)
+{
+	int count_sleeps = 5;
+	int ret = -ETIME;
+
+	if (!hdq_priv.hdq_probed)
+		return -EINVAL;
+
+	mutex_lock(&hdq_priv.hdq_lock);
+
+	hdq_priv.hdq_error = 0;
+	hdq_priv.hdq_ads = address | HDQ_WRITE;
+	hdq_priv.hdq_tx_data = data;
+	hdq_priv.hdq_request_ctr++;
+	hdq_priv.pdata->kick_fiq();
+	/*
+	 * FIQ takes care of it while we block our calling process
+	 * But we're not spinning -- other processes run normally while
+	 * we wait for the result
+	 */
+	while (count_sleeps--) {
+		msleep(10); /* valid transaction always completes in < 10ms */
+
+		if (fiq_busy())
+			continue; /* something bad with FIQ */
+
+		if (hdq_priv.hdq_error) {
+			hdq_bad();
+			goto done; /* didn't see a response in good time */
+		}
+		hdq_good();
+
+		ret = 0;
+		goto done;
+	}
+
+done:
+	mutex_unlock(&hdq_priv.hdq_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(hdq_write);
+
+/* sysfs */
+
+static ssize_t hdq_sysfs_dump(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	int n;
+	int v;
+	u8 u8a[128]; /* whole address space for HDQ */
+	char *end = buf;
+
+	if (!hdq_priv.hdq_probed)
+		return -EINVAL;
+
+	/* the dump does not take care about 16 bit regs, because at this
+	 * bus level we don't know about the chip details
+	 */
+	for (n = 0; n < sizeof(u8a); n++) {
+		v = hdq_read(n);
+		if (v < 0)
+			goto bail;
+		u8a[n] = v;
+	}
+
+	for (n = 0; n < sizeof(u8a); n += 16) {
+		hex_dump_to_buffer(u8a + n, sizeof(u8a), 16, 1, end, 4096, 0);
+		end += strlen(end);
+		*end++ = '\n';
+		*end = '\0';
+	}
+	return (end - buf);
+
+bail:
+	return sprintf(buf, "ERROR %d\n", v);
+}
+
+/* you write by <address> <data>, eg, "34 128" */
+
+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
+
+static ssize_t hdq_sysfs_write(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	const char *end = buf + count;
+	int address = atoi(buf);
+
+	if (!hdq_priv.hdq_probed)
+		return -EINVAL;
+
+	while ((buf != end) && (*buf != ' '))
+		buf++;
+	if (buf >= end)
+		return 0;
+	while ((buf < end) && (*buf == ' '))
+		buf++;
+	if (buf >= end)
+		return 0;
+
+	hdq_write(address, atoi(buf));
+
+	return count;
+}
+
+static DEVICE_ATTR(dump, 0400, hdq_sysfs_dump, NULL);
+static DEVICE_ATTR(write, 0600, NULL, hdq_sysfs_write);
+
+static struct attribute *hdq_sysfs_entries[] = {
+	&dev_attr_dump.attr,
+	&dev_attr_write.attr,
+	NULL
+};
+
+static struct attribute_group hdq_attr_group = {
+	.name	= "hdq",
+	.attrs	= hdq_sysfs_entries,
+};
+
+
+#ifdef CONFIG_PM
+static int hdq_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	/* after 18s of this, the battery monitor will also go to sleep */
+	hdq_priv.pdata->gpio_dir_in();
+	hdq_priv.pdata->disable_fiq();
+	return 0;
+}
+
+static int hdq_resume(struct platform_device *pdev)
+{
+	hdq_priv.pdata->gpio_set(1);
+	hdq_priv.pdata->gpio_dir_out();
+	hdq_priv.pdata->enable_fiq();
+	return 0;
+}
+#endif
+
+static int __init hdq_probe(struct platform_device *pdev)
+{
+	struct resource *r = platform_get_resource(pdev, 0, 0);
+	int ret;
+	struct hdq_platform_data *pdata = pdev->dev.platform_data;
+
+	if (!r || !pdata)
+		return -EINVAL;
+
+	platform_set_drvdata(pdev, NULL);
+
+	mutex_init(&hdq_priv.hdq_lock);
+
+	/* set our HDQ comms pin from the platform data */
+	hdq_priv.hdq_gpio_pin = r->start;
+	hdq_priv.pdata = pdata;
+
+	hdq_priv.pdata->gpio_set(1);
+	hdq_priv.pdata->gpio_dir_out();
+
+	/* Initialize FIQ */
+	if (hdq_priv.pdata->enable_fiq() < 0) {
+		dev_err(&pdev->dev, "Could not enable FIQ source\n");
+		return -EINVAL;
+	}
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &hdq_attr_group);
+	if (ret)
+		return ret;
+
+	hdq_priv.hdq_probed = 1; /* we are ready to do stuff now */
+
+	/*
+	 * if wanted, users can defer registration of devices
+	 * that depend on HDQ until after we register, and can use our
+	 * device as parent so suspend-resume ordering is correct
+	 */
+	if (pdata->attach_child_devices)
+		(pdata->attach_child_devices)(&pdev->dev);
+
+	hdq_priv.pdata = pdata;
+
+	return 0;
+}
+
+static int hdq_remove(struct platform_device *pdev)
+{
+	sysfs_remove_group(&pdev->dev.kobj, &hdq_attr_group);
+	return 0;
+}
+
+static struct platform_driver hdq_driver = {
+	.probe		= hdq_probe,
+	.remove		= hdq_remove,
+#ifdef CONFIG_PM
+	.suspend	= hdq_suspend,
+	.resume		= hdq_resume,
+#endif
+	.driver		= {
+		.name		= "hdq",
+	},
+};
+
+static int __init hdq_init(void)
+{
+	return platform_driver_register(&hdq_driver);
+}
+
+static void __exit hdq_exit(void)
+{
+ 	platform_driver_unregister(&hdq_driver);
+}
+
+module_init(hdq_init);
+module_exit(hdq_exit);
+
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("HDQ driver");
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index 5fbca2681ba..58e419299cd 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
@@ -35,6 +36,7 @@
 #define BAT_STAT_AC		0x10
 #define BAT_STAT_CHARGING	0x20
 #define BAT_STAT_DISCHARGING	0x40
+#define BAT_STAT_TRICKLE	0x80
 
 #define BAT_ERR_INFOFAIL	0x02
 #define BAT_ERR_OVERVOLTAGE	0x04
@@ -89,7 +91,7 @@ static char bat_serial[17]; /* Ick */
 static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
 {
 	if (olpc_platform_info.ecver > 0x44) {
-		if (ec_byte & BAT_STAT_CHARGING)
+		if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE))
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else if (ec_byte & BAT_STAT_DISCHARGING)
 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
@@ -219,7 +221,8 @@ static int olpc_bat_get_property(struct power_supply *psy,
 	   It doesn't matter though -- the EC will return the last-known
 	   information, and it's as if we just ran that _little_ bit faster
 	   and managed to read it out before the battery went away. */
-	if (!(ec_byte & BAT_STAT_PRESENT) && psp != POWER_SUPPLY_PROP_PRESENT)
+	if (!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)) &&
+			psp != POWER_SUPPLY_PROP_PRESENT)
 		return -ENODEV;
 
 	switch (psp) {
@@ -229,7 +232,8 @@ static int olpc_bat_get_property(struct power_supply *psy,
 			return ret;
 		break;
 	case POWER_SUPPLY_PROP_PRESENT:
-		val->intval = !!(ec_byte & BAT_STAT_PRESENT);
+		val->intval = !!(ec_byte & (BAT_STAT_PRESENT |
+					    BAT_STAT_TRICKLE));
 		break;
 
 	case POWER_SUPPLY_PROP_HEALTH:
@@ -334,21 +338,21 @@ static ssize_t olpc_bat_eeprom_read(struct kobject *kobj,
 		struct bin_attribute *attr, char *buf, loff_t off, size_t count)
 {
 	uint8_t ec_byte;
-	int ret, end;
+	int ret;
+	int i;
 
 	if (off >= EEPROM_SIZE)
 		return 0;
 	if (off + count > EEPROM_SIZE)
 		count = EEPROM_SIZE - off;
 
-	end = EEPROM_START + off + count;
-	for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
-		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
-				&buf[ec_byte - EEPROM_START], 1);
+	for (i = 0; i < count; i++) {
+		ec_byte = EEPROM_START + off + i;
+		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &buf[i], 1);
 		if (ret) {
-			printk(KERN_ERR "olpc-battery:  EC command "
-					"EC_BAT_EEPROM @ 0x%x failed -"
-					" %d!\n", ec_byte, ret);
+			pr_err("olpc-battery: "
+			       "EC_BAT_EEPROM cmd @ 0x%x failed - %d!\n",
+			       ec_byte, ret);
 			return -EIO;
 		}
 	}
diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c
index e8b278f7178..8424c40672a 100644
--- a/drivers/power/pcf50633-charger.c
+++ b/drivers/power/pcf50633-charger.c
@@ -29,15 +29,12 @@
 struct pcf50633_mbc {
 	struct pcf50633 *pcf;
 
-	int adapter_active;
 	int adapter_online;
-	int usb_active;
 	int usb_online;
 
 	struct power_supply usb;
 	struct power_supply adapter;
-
-	struct delayed_work charging_restart_work;
+	struct power_supply ac;
 };
 
 int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
@@ -47,16 +44,21 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
 	u8 bits;
 	int charging_start = 1;
 	u8 mbcs2, chgmod;
+	unsigned int mbcc5;
 
-	if (ma >= 1000)
+	if (ma >= 1000) {
 		bits = PCF50633_MBCC7_USB_1000mA;
-	else if (ma >= 500)
+		ma = 1000;
+	} else if (ma >= 500) {
 		bits = PCF50633_MBCC7_USB_500mA;
-	else if (ma >= 100)
+		ma = 500;
+	} else if (ma >= 100) {
 		bits = PCF50633_MBCC7_USB_100mA;
-	else {
+		ma = 100;
+	} else {
 		bits = PCF50633_MBCC7_USB_SUSPEND;
 		charging_start = 0;
+		ma = 0;
 	}
 
 	ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7,
@@ -66,21 +68,40 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
 	else
 		dev_info(pcf->dev, "usb curlim to %d mA\n", ma);
 
-	/* Manual charging start */
-	mbcs2 = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
+	/*
+	 * We limit the charging current to be the USB current limit.
+	 * The reason is that on pcf50633, when it enters PMU Standby mode,
+	 * which it does when the device goes "off", the USB current limit
+	 * reverts to the variant default.  In at least one common case, that
+	 * default is 500mA.  By setting the charging current to be the same
+	 * as the USB limit we set here before PMU standby, we enforce it only
+	 * using the correct amount of current even when the USB current limit
+	 * gets reset to the wrong thing
+	 */
+
+	if (mbc->pcf->pdata->chg_ref_current_ma) {
+		mbcc5 = (ma << 8) / mbc->pcf->pdata->chg_ref_current_ma;
+		if (mbcc5 > 255)
+			mbcc5 = 255;
+		pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
+	}
+
+	mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
 	chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
 
 	/* If chgmod == BATFULL, setting chgena has no effect.
-	 * We need to set resume instead.
+	 * Datasheet says we need to set resume instead but when autoresume is
+	 * used resume doesn't work. Clear and set chgena instead.
 	 */
 	if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL)
 		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
 				PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
-	else
+	else {
+		pcf50633_reg_clear_bits(pcf, PCF50633_REG_MBCC1,
+				PCF50633_MBCC1_CHGENA);
 		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
-				PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME);
-
-	mbc->usb_active = charging_start;
+				PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
+	}
 
 	power_supply_changed(&mbc->usb);
 
@@ -92,20 +113,44 @@ int pcf50633_mbc_get_status(struct pcf50633 *pcf)
 {
 	struct pcf50633_mbc *mbc  = platform_get_drvdata(pcf->mbc_pdev);
 	int status = 0;
+	u8 chgmod;
+
+	if (!mbc)
+		return 0;
+
+	chgmod = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2)
+		& PCF50633_MBCS2_MBC_MASK;
 
 	if (mbc->usb_online)
 		status |= PCF50633_MBC_USB_ONLINE;
-	if (mbc->usb_active)
+	if (chgmod == PCF50633_MBCS2_MBC_USB_PRE ||
+	    chgmod == PCF50633_MBCS2_MBC_USB_PRE_WAIT ||
+	    chgmod == PCF50633_MBCS2_MBC_USB_FAST ||
+	    chgmod == PCF50633_MBCS2_MBC_USB_FAST_WAIT)
 		status |= PCF50633_MBC_USB_ACTIVE;
 	if (mbc->adapter_online)
 		status |= PCF50633_MBC_ADAPTER_ONLINE;
-	if (mbc->adapter_active)
+	if (chgmod == PCF50633_MBCS2_MBC_ADP_PRE ||
+	    chgmod == PCF50633_MBCS2_MBC_ADP_PRE_WAIT ||
+	    chgmod == PCF50633_MBCS2_MBC_ADP_FAST ||
+	    chgmod == PCF50633_MBCS2_MBC_ADP_FAST_WAIT)
 		status |= PCF50633_MBC_ADAPTER_ACTIVE;
 
 	return status;
 }
 EXPORT_SYMBOL_GPL(pcf50633_mbc_get_status);
 
+int pcf50633_mbc_get_usb_online_status(struct pcf50633 *pcf)
+{
+	struct pcf50633_mbc *mbc  = platform_get_drvdata(pcf->mbc_pdev);
+
+	if (!mbc)
+		return 0;
+
+	return mbc->usb_online;
+}
+EXPORT_SYMBOL_GPL(pcf50633_mbc_get_usb_online_status);
+
 static ssize_t
 show_chgmode(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -156,9 +201,50 @@ static ssize_t set_usblim(struct device *dev,
 
 static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, set_usblim);
 
+static ssize_t
+show_chglim(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+	u8 mbcc5 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC5);
+	unsigned int ma;
+
+	if (!mbc->pcf->pdata->chg_ref_current_ma)
+		return -ENODEV;
+
+	ma = (mbc->pcf->pdata->chg_ref_current_ma *  mbcc5) >> 8;
+
+	return sprintf(buf, "%u\n", ma);
+}
+
+static ssize_t set_chglim(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+	unsigned long ma;
+	unsigned int mbcc5;
+	int ret;
+
+	if (!mbc->pcf->pdata->chg_ref_current_ma)
+		return -ENODEV;
+
+	ret = strict_strtoul(buf, 10, &ma);
+	if (ret)
+		return -EINVAL;
+
+	mbcc5 = (ma << 8) / mbc->pcf->pdata->chg_ref_current_ma;
+	if (mbcc5 > 255)
+		mbcc5 = 255;
+	pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
+
+	return count;
+}
+
+static DEVICE_ATTR(chg_curlim, S_IRUGO | S_IWUSR, show_chglim, set_chglim);
+
 static struct attribute *pcf50633_mbc_sysfs_entries[] = {
 	&dev_attr_chgmode.attr,
 	&dev_attr_usb_curlim.attr,
+	&dev_attr_chg_curlim.attr,
 	NULL,
 };
 
@@ -167,76 +253,26 @@ static struct attribute_group mbc_attr_group = {
 	.attrs	= pcf50633_mbc_sysfs_entries,
 };
 
-/* MBC state machine switches into charging mode when the battery voltage
- * falls below 96% of a battery float voltage. But the voltage drop in Li-ion
- * batteries is marginal(1~2 %) till about 80% of its capacity - which means,
- * after a BATFULL, charging won't be restarted until 80%.
- *
- * This work_struct function restarts charging at regular intervals to make
- * sure we don't discharge too much
- */
-
-static void pcf50633_mbc_charging_restart(struct work_struct *work)
-{
-	struct pcf50633_mbc *mbc;
-	u8 mbcs2, chgmod;
-
-	mbc = container_of(work, struct pcf50633_mbc,
-				charging_restart_work.work);
-
-	mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
-	chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
-
-	if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL)
-		return;
-
-	/* Restart charging */
-	pcf50633_reg_set_bit_mask(mbc->pcf, PCF50633_REG_MBCC1,
-				PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME);
-	mbc->usb_active = 1;
-	power_supply_changed(&mbc->usb);
-
-	dev_info(mbc->pcf->dev, "Charging restarted\n");
-}
-
 static void
 pcf50633_mbc_irq_handler(int irq, void *data)
 {
 	struct pcf50633_mbc *mbc = data;
-	int chg_restart_interval =
-			mbc->pcf->pdata->charging_restart_interval;
 
 	/* USB */
 	if (irq == PCF50633_IRQ_USBINS) {
 		mbc->usb_online = 1;
 	} else if (irq == PCF50633_IRQ_USBREM) {
 		mbc->usb_online = 0;
-		mbc->usb_active = 0;
 		pcf50633_mbc_usb_curlim_set(mbc->pcf, 0);
-		cancel_delayed_work_sync(&mbc->charging_restart_work);
 	}
 
 	/* Adapter */
-	if (irq == PCF50633_IRQ_ADPINS) {
+	if (irq == PCF50633_IRQ_ADPINS)
 		mbc->adapter_online = 1;
-		mbc->adapter_active = 1;
-	} else if (irq == PCF50633_IRQ_ADPREM) {
+	else if (irq == PCF50633_IRQ_ADPREM)
 		mbc->adapter_online = 0;
-		mbc->adapter_active = 0;
-	}
-
-	if (irq == PCF50633_IRQ_BATFULL) {
-		mbc->usb_active = 0;
-		mbc->adapter_active = 0;
-
-		if (chg_restart_interval > 0)
-			schedule_delayed_work(&mbc->charging_restart_work,
-							chg_restart_interval);
-	} else if (irq == PCF50633_IRQ_USBLIMON)
-		mbc->usb_active = 0;
-	else if (irq == PCF50633_IRQ_USBLIMOFF)
-		mbc->usb_active = 1;
 
+	power_supply_changed(&mbc->ac);
 	power_supply_changed(&mbc->usb);
 	power_supply_changed(&mbc->adapter);
 
@@ -269,10 +305,34 @@ static int usb_get_property(struct power_supply *psy,
 {
 	struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, usb);
 	int ret = 0;
+	u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
+						PCF50633_MBCC7_USB_MASK;
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_ONLINE:
-		val->intval = mbc->usb_online;
+		val->intval = mbc->usb_online &&
+				(usblim <= PCF50633_MBCC7_USB_500mA);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int ac_get_property(struct power_supply *psy,
+			enum power_supply_property psp,
+			union power_supply_propval *val)
+{
+	struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, ac);
+	int ret = 0;
+	u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
+						PCF50633_MBCC7_USB_MASK;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = mbc->usb_online &&
+				(usblim == PCF50633_MBCC7_USB_1000mA);
 		break;
 	default:
 		ret = -EINVAL;
@@ -303,7 +363,6 @@ static const u8 mbc_irq_handlers[] = {
 static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
 {
 	struct pcf50633_mbc *mbc;
-	struct pcf50633_subdev_pdata *pdata = pdev->dev.platform_data;
 	int ret;
 	int i;
 	u8 mbcs1;
@@ -313,7 +372,7 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	platform_set_drvdata(pdev, mbc);
-	mbc->pcf = pdata->pcf;
+	mbc->pcf = dev_to_pcf50633(pdev->dev.parent);
 
 	/* Set up IRQ handlers */
 	for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
@@ -337,6 +396,14 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
 	mbc->usb.supplied_to		= mbc->pcf->pdata->batteries;
 	mbc->usb.num_supplicants	= mbc->pcf->pdata->num_batteries;
 
+	mbc->ac.name			= "ac";
+	mbc->ac.type			= POWER_SUPPLY_TYPE_MAINS;
+	mbc->ac.properties		= power_props;
+	mbc->ac.num_properties		= ARRAY_SIZE(power_props);
+	mbc->ac.get_property		= ac_get_property;
+	mbc->ac.supplied_to		= mbc->pcf->pdata->batteries;
+	mbc->ac.num_supplicants		= mbc->pcf->pdata->num_batteries;
+
 	ret = power_supply_register(&pdev->dev, &mbc->adapter);
 	if (ret) {
 		dev_err(mbc->pcf->dev, "failed to register adapter\n");
@@ -352,8 +419,14 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	INIT_DELAYED_WORK(&mbc->charging_restart_work,
-				pcf50633_mbc_charging_restart);
+	ret = power_supply_register(&pdev->dev, &mbc->ac);
+	if (ret) {
+		dev_err(mbc->pcf->dev, "failed to register ac\n");
+		power_supply_unregister(&mbc->adapter);
+		power_supply_unregister(&mbc->usb);
+		kfree(mbc);
+		return ret;
+	}
 
 	ret = sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group);
 	if (ret)
@@ -379,8 +452,7 @@ static int __devexit pcf50633_mbc_remove(struct platform_device *pdev)
 
 	power_supply_unregister(&mbc->usb);
 	power_supply_unregister(&mbc->adapter);
-
-	cancel_delayed_work_sync(&mbc->charging_restart_work);
+	power_supply_unregister(&mbc->ac);
 
 	kfree(mbc);
 
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c
index 8bde92126d3..b787335a841 100644
--- a/drivers/power/wm97xx_battery.c
+++ b/drivers/power/wm97xx_battery.c
@@ -33,14 +33,14 @@ static enum power_supply_property *prop;
 
 static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
 {
-	return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+	return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent),
 					pdata->batt_aux) * pdata->batt_mult /
 					pdata->batt_div;
 }
 
 static unsigned long wm97xx_read_temp(struct power_supply *bat_ps)
 {
-	return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+	return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent),
 					pdata->temp_aux) * pdata->temp_mult /
 					pdata->temp_div;
 }
diff --git a/drivers/pps/pps.c b/drivers/pps/pps.c
index ac8cc8cea1e..fea17e7805e 100644
--- a/drivers/pps/pps.c
+++ b/drivers/pps/pps.c
@@ -244,7 +244,7 @@ int pps_register_cdev(struct pps_device *pps)
 	}
 	pps->dev = device_create(pps_class, pps->info.dev, pps->devno, NULL,
 							"pps%d", pps->id);
-	if (err)
+	if (IS_ERR(pps->dev))
 		goto del_cdev;
 	dev_set_drvdata(pps->dev, pps);
 
diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
index 8e14900eb68..5b6ade952f0 100644
--- a/drivers/regulator/pcf50633-regulator.c
+++ b/drivers/regulator/pcf50633-regulator.c
@@ -24,11 +24,12 @@
 #include <linux/mfd/pcf50633/core.h>
 #include <linux/mfd/pcf50633/pmic.h>
 
-#define PCF50633_REGULATOR(_name, _id) 		\
+#define PCF50633_REGULATOR(_name, _id, _n) 		\
 	{					\
 		.name = _name, 			\
 		.id = _id,			\
 		.ops = &pcf50633_regulator_ops,	\
+		.n_voltages = _n, \
 		.type = REGULATOR_VOLTAGE, 	\
 		.owner = THIS_MODULE, 		\
 	}
@@ -149,11 +150,42 @@ static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev,
 	return pcf50633_reg_write(pcf, regnr, volt_bits);
 }
 
+static int pcf50633_regulator_voltage_value(enum pcf50633_regulator_id id,
+						u8 bits)
+{
+	int millivolts;
+
+	switch (id) {
+	case PCF50633_REGULATOR_AUTO:
+		millivolts = auto_voltage_value(bits);
+		break;
+	case PCF50633_REGULATOR_DOWN1:
+		millivolts = down_voltage_value(bits);
+		break;
+	case PCF50633_REGULATOR_DOWN2:
+		millivolts = down_voltage_value(bits);
+		break;
+	case PCF50633_REGULATOR_LDO1:
+	case PCF50633_REGULATOR_LDO2:
+	case PCF50633_REGULATOR_LDO3:
+	case PCF50633_REGULATOR_LDO4:
+	case PCF50633_REGULATOR_LDO5:
+	case PCF50633_REGULATOR_LDO6:
+	case PCF50633_REGULATOR_HCLDO:
+		millivolts = ldo_voltage_value(bits);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return millivolts * 1000;
+}
+
 static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev)
 {
 	struct pcf50633 *pcf;
-	int regulator_id, millivolts, volt_bits;
-	u8 regnr;
+	int regulator_id;
+	u8 volt_bits, regnr;
 
 	pcf = rdev_get_drvdata(rdev);;
 
@@ -164,33 +196,32 @@ static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev)
 	regnr = pcf50633_regulator_registers[regulator_id];
 
 	volt_bits = pcf50633_reg_read(pcf, regnr);
-	if (volt_bits < 0)
-		return -1;
+
+	return pcf50633_regulator_voltage_value(regulator_id, volt_bits);
+}
+
+static int pcf50633_regulator_list_voltage(struct regulator_dev *rdev,
+						unsigned int index)
+{
+	struct pcf50633 *pcf;
+	int regulator_id;
+
+	pcf = rdev_get_drvdata(rdev);
+
+	regulator_id = rdev_get_id(rdev);
 
 	switch (regulator_id) {
 	case PCF50633_REGULATOR_AUTO:
-		millivolts = auto_voltage_value(volt_bits);
-		break;
-	case PCF50633_REGULATOR_DOWN1:
-		millivolts = down_voltage_value(volt_bits);
+		index += 0x2f;
 		break;
-	case PCF50633_REGULATOR_DOWN2:
-		millivolts = down_voltage_value(volt_bits);
-		break;
-	case PCF50633_REGULATOR_LDO1:
-	case PCF50633_REGULATOR_LDO2:
-	case PCF50633_REGULATOR_LDO3:
-	case PCF50633_REGULATOR_LDO4:
-	case PCF50633_REGULATOR_LDO5:
-	case PCF50633_REGULATOR_LDO6:
 	case PCF50633_REGULATOR_HCLDO:
-		millivolts = ldo_voltage_value(volt_bits);
+		index += 0x01;
 		break;
 	default:
-		return -EINVAL;
+		break;
 	}
 
-	return millivolts * 1000;
+	return pcf50633_regulator_voltage_value(regulator_id, index);
 }
 
 static int pcf50633_regulator_enable(struct regulator_dev *rdev)
@@ -246,6 +277,7 @@ static int pcf50633_regulator_is_enabled(struct regulator_dev *rdev)
 static struct regulator_ops pcf50633_regulator_ops = {
 	.set_voltage = pcf50633_regulator_set_voltage,
 	.get_voltage = pcf50633_regulator_get_voltage,
+	.list_voltage = pcf50633_regulator_list_voltage,
 	.enable = pcf50633_regulator_enable,
 	.disable = pcf50633_regulator_disable,
 	.is_enabled = pcf50633_regulator_is_enabled,
@@ -253,27 +285,27 @@ static struct regulator_ops pcf50633_regulator_ops = {
 
 static struct regulator_desc regulators[] = {
 	[PCF50633_REGULATOR_AUTO] =
-		PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO),
+		PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO, 80),
 	[PCF50633_REGULATOR_DOWN1] =
-		PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1),
+		PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1, 95),
 	[PCF50633_REGULATOR_DOWN2] =
-		PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2),
+		PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2, 95),
 	[PCF50633_REGULATOR_LDO1] =
-		PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1),
+		PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1, 27),
 	[PCF50633_REGULATOR_LDO2] =
-		PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2),
+		PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2, 27),
 	[PCF50633_REGULATOR_LDO3] =
-		PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3),
+		PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3, 27),
 	[PCF50633_REGULATOR_LDO4] =
-		PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4),
+		PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4, 27),
 	[PCF50633_REGULATOR_LDO5] =
-		PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5),
+		PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5, 27),
 	[PCF50633_REGULATOR_LDO6] =
-		PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6),
+		PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6, 27),
 	[PCF50633_REGULATOR_HCLDO] =
-		PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO),
+		PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO, 26),
 	[PCF50633_REGULATOR_MEMLDO] =
-		PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO),
+		PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO, 0),
 };
 
 static int __devinit pcf50633_regulator_probe(struct platform_device *pdev)
@@ -282,13 +314,15 @@ static int __devinit pcf50633_regulator_probe(struct platform_device *pdev)
 	struct pcf50633 *pcf;
 
 	/* Already set by core driver */
-	pcf = platform_get_drvdata(pdev);
+	pcf = dev_to_pcf50633(pdev->dev.parent);
 
 	rdev = regulator_register(&regulators[pdev->id], &pdev->dev,
 				  pdev->dev.platform_data, pcf);
 	if (IS_ERR(rdev))
 		return PTR_ERR(rdev);
 
+	platform_set_drvdata(pdev, rdev);
+
 	if (pcf->pdata->regulator_registered)
 		pcf->pdata->regulator_registered(pcf, pdev->id);
 
@@ -299,6 +333,7 @@ static int __devexit pcf50633_regulator_remove(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);
 
+	platform_set_drvdata(pdev, NULL);
 	regulator_unregister(rdev);
 
 	return 0;
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index aafd3e6ebb0..a118eb0f1e6 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -1,8 +1,8 @@
 /*
  * Blackfin On-Chip Real Time Clock Driver
- *  Supports BF52[257]/BF53[123]/BF53[467]/BF54[24789]
+ *  Supports BF51x/BF52x/BF53[123]/BF53[467]/BF54x
  *
- * Copyright 2004-2008 Analog Devices Inc.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
  *
@@ -363,7 +363,7 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev)
 	struct bfin_rtc *rtc;
 	struct device *dev = &pdev->dev;
 	int ret = 0;
-	unsigned long timeout;
+	unsigned long timeout = jiffies + HZ;
 
 	dev_dbg_stamp(dev);
 
@@ -374,32 +374,32 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, rtc);
 	device_init_wakeup(dev, 1);
 
+	/* Register our RTC with the RTC framework */
+	rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops,
+						THIS_MODULE);
+	if (unlikely(IS_ERR(rtc->rtc_dev))) {
+		ret = PTR_ERR(rtc->rtc_dev);
+		goto err;
+	}
+
 	/* Grab the IRQ and init the hardware */
 	ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev);
 	if (unlikely(ret))
-		goto err;
+		goto err_reg;
 	/* sometimes the bootloader touched things, but the write complete was not
 	 * enabled, so let's just do a quick timeout here since the IRQ will not fire ...
 	 */
-	timeout = jiffies + HZ;
 	while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
 		if (time_after(jiffies, timeout))
 			break;
 	bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
 	bfin_write_RTC_SWCNT(0);
 
-	/* Register our RTC with the RTC framework */
-	rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, THIS_MODULE);
-	if (unlikely(IS_ERR(rtc->rtc_dev))) {
-		ret = PTR_ERR(rtc->rtc_dev);
-		goto err_irq;
-	}
-
 	return 0;
 
- err_irq:
-	free_irq(IRQ_RTC, dev);
- err:
+err_reg:
+	rtc_device_unregister(rtc->rtc_dev);
+err:
 	kfree(rtc);
 	return ret;
 }
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 23e10b6263d..f7a4701bf86 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -1174,23 +1174,34 @@ static struct platform_driver cmos_platform_driver = {
 	}
 };
 
+#ifdef CONFIG_PNP
+static bool pnp_driver_registered;
+#endif
+static bool platform_driver_registered;
+
 static int __init cmos_init(void)
 {
 	int retval = 0;
 
 #ifdef	CONFIG_PNP
-	pnp_register_driver(&cmos_pnp_driver);
+	retval = pnp_register_driver(&cmos_pnp_driver);
+	if (retval == 0)
+		pnp_driver_registered = true;
 #endif
 
-	if (!cmos_rtc.dev)
+	if (!cmos_rtc.dev) {
 		retval = platform_driver_probe(&cmos_platform_driver,
 					       cmos_platform_probe);
+		if (retval == 0)
+			platform_driver_registered = true;
+	}
 
 	if (retval == 0)
 		return 0;
 
 #ifdef	CONFIG_PNP
-	pnp_unregister_driver(&cmos_pnp_driver);
+	if (pnp_driver_registered)
+		pnp_unregister_driver(&cmos_pnp_driver);
 #endif
 	return retval;
 }
@@ -1199,9 +1210,11 @@ module_init(cmos_init);
 static void __exit cmos_exit(void)
 {
 #ifdef	CONFIG_PNP
-	pnp_unregister_driver(&cmos_pnp_driver);
+	if (pnp_driver_registered)
+		pnp_unregister_driver(&cmos_pnp_driver);
 #endif
-	platform_driver_unregister(&cmos_platform_driver);
+	if (platform_driver_registered)
+		platform_driver_unregister(&cmos_platform_driver);
 }
 module_exit(cmos_exit);
 
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 32b27739ec2..713f7bf5afb 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -283,7 +283,7 @@ static void ds1374_work(struct work_struct *work)
 
 	stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
 	if (stat < 0)
-		return;
+		goto unlock;
 
 	if (stat & DS1374_REG_SR_AF) {
 		stat &= ~DS1374_REG_SR_AF;
@@ -302,7 +302,7 @@ static void ds1374_work(struct work_struct *work)
 out:
 	if (!ds1374->exiting)
 		enable_irq(client->irq);
-
+unlock:
 	mutex_unlock(&ds1374->mutex);
 }
 
diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c
index f4dd87e2907..2d573e95f4f 100644
--- a/drivers/rtc/rtc-pcf50633.c
+++ b/drivers/rtc/rtc-pcf50633.c
@@ -58,6 +58,7 @@ struct pcf50633_time {
 struct pcf50633_rtc {
 	int alarm_enabled;
 	int second_enabled;
+	int alarm_pending;
 
 	struct pcf50633 *pcf;
 	struct rtc_device *rtc_dev;
@@ -70,7 +71,7 @@ static void pcf2rtc_time(struct rtc_time *rtc, struct pcf50633_time *pcf)
 	rtc->tm_hour = bcd2bin(pcf->time[PCF50633_TI_HOUR]);
 	rtc->tm_wday = bcd2bin(pcf->time[PCF50633_TI_WKDAY]);
 	rtc->tm_mday = bcd2bin(pcf->time[PCF50633_TI_DAY]);
-	rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]);
+	rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]) - 1;
 	rtc->tm_year = bcd2bin(pcf->time[PCF50633_TI_YEAR]) + 100;
 }
 
@@ -81,7 +82,7 @@ static void rtc2pcf_time(struct pcf50633_time *pcf, struct rtc_time *rtc)
 	pcf->time[PCF50633_TI_HOUR] = bin2bcd(rtc->tm_hour);
 	pcf->time[PCF50633_TI_WKDAY] = bin2bcd(rtc->tm_wday);
 	pcf->time[PCF50633_TI_DAY] = bin2bcd(rtc->tm_mday);
-	pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon);
+	pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon + 1);
 	pcf->time[PCF50633_TI_YEAR] = bin2bcd(rtc->tm_year % 100);
 }
 
@@ -209,6 +210,7 @@ static int pcf50633_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	rtc = dev_get_drvdata(dev);
 
 	alrm->enabled = rtc->alarm_enabled;
+	alrm->pending = rtc->alarm_pending;
 
 	ret = pcf50633_read_block(rtc->pcf, PCF50633_REG_RTCSCA,
 				PCF50633_TI_EXTENT, &pcf_tm.time[0]);
@@ -244,9 +246,12 @@ static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	/* Returns 0 on success */
 	ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSCA,
 				PCF50633_TI_EXTENT, &pcf_tm.time[0]);
+	if (!alrm->enabled)
+		rtc->alarm_pending = 0;
 
-	if (!alarm_masked)
+	if (!alarm_masked || alrm->enabled)
 		pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
+	rtc->alarm_enabled = alrm->enabled;
 
 	return ret;
 }
@@ -267,6 +272,7 @@ static void pcf50633_rtc_irq(int irq, void *data)
 	switch (irq) {
 	case PCF50633_IRQ_ALARM:
 		rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
+		rtc->alarm_pending = 1;
 		break;
 	case PCF50633_IRQ_SECOND:
 		rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF);
@@ -276,16 +282,13 @@ static void pcf50633_rtc_irq(int irq, void *data)
 
 static int __devinit pcf50633_rtc_probe(struct platform_device *pdev)
 {
-	struct pcf50633_subdev_pdata *pdata;
 	struct pcf50633_rtc *rtc;
 
-
 	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
 	if (!rtc)
 		return -ENOMEM;
 
-	pdata = pdev->dev.platform_data;
-	rtc->pcf = pdata->pcf;
+	rtc->pcf = dev_to_pcf50633(pdev->dev.parent);
 	platform_set_drvdata(pdev, rtc);
 	rtc->rtc_dev = rtc_device_register("pcf50633-rtc", &pdev->dev,
 				&pcf50633_rtc_ops, THIS_MODULE);
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index f11297aff85..2c839d0d21b 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for NEC VR4100 series Real Time Clock unit.
  *
- *  Copyright (C) 2003-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2003-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -33,7 +33,7 @@
 #include <asm/io.h>
 #include <asm/uaccess.h>
 
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
 MODULE_DESCRIPTION("NEC VR4100 series RTC driver");
 MODULE_LICENSE("GPL v2");
 
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 74983666865..3f62dd50bbb 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2135,9 +2135,9 @@ static int dasd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 	struct dasd_device *base;
 
 	block = bdev->bd_disk->private_data;
-	base = block->base;
 	if (!block)
 		return -ENODEV;
+	base = block->base;
 
 	if (!base->discipline ||
 	    !base->discipline->fill_geometry)
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index f8b1f04f26b..c11770f5b36 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -1696,8 +1696,7 @@ static void dasd_eckd_handle_unsolicited_interrupt(struct dasd_device *device,
 		DBF_DEV_EVENT(DBF_ERR, device, "%s",
 			    "unsolicited interrupt received "
 			    "(sense available)");
-		device->discipline->dump_sense_dbf(device, NULL, irb,
-						   "unsolicited");
+		device->discipline->dump_sense_dbf(device, irb, "unsolicited");
 	}
 
 	dasd_schedule_device_bh(device);
@@ -2941,42 +2940,20 @@ dasd_eckd_dump_ccw_range(struct ccw1 *from, struct ccw1 *to, char *page)
 }
 
 static void
-dasd_eckd_dump_sense_dbf(struct dasd_device *device, struct dasd_ccw_req *req,
-			 struct irb *irb, char *reason)
+dasd_eckd_dump_sense_dbf(struct dasd_device *device, struct irb *irb,
+			 char *reason)
 {
 	u64 *sense;
-	int sl;
-	struct tsb *tsb;
 
-	sense = NULL;
-	tsb = NULL;
-	if (req && scsw_is_tm(&req->irb.scsw)) {
-		if (irb->scsw.tm.tcw)
-			tsb = tcw_get_tsb(
-				(struct tcw *)(unsigned long)irb->scsw.tm.tcw);
-		if (tsb && (irb->scsw.tm.fcxs == 0x01)) {
-			switch (tsb->flags & 0x07) {
-			case 1:	/* tsa_iostat */
-				sense = (u64 *)tsb->tsa.iostat.sense;
-			break;
-			case 2: /* ts_ddpc */
-				sense = (u64 *)tsb->tsa.ddpc.sense;
-			break;
-			case 3: /* tsa_intrg */
-			break;
-			}
-		}
-	} else {
-		if (irb->esw.esw0.erw.cons)
-			sense = (u64 *)irb->ecw;
-	}
+	sense = (u64 *) dasd_get_sense(irb);
 	if (sense) {
-		for (sl = 0; sl < 4; sl++) {
-			DBF_DEV_EVENT(DBF_EMERG, device,
-				      "%s: %016llx %016llx %016llx %016llx",
-				      reason, sense[0], sense[1], sense[2],
-				      sense[3]);
-		}
+		DBF_DEV_EVENT(DBF_EMERG, device,
+			      "%s: %s %02x%02x%02x %016llx %016llx %016llx "
+			      "%016llx", reason,
+			      scsw_is_tm(&irb->scsw) ? "t" : "c",
+			      scsw_cc(&irb->scsw), scsw_cstat(&irb->scsw),
+			      scsw_dstat(&irb->scsw), sense[0], sense[1],
+			      sense[2], sense[3]);
 	} else {
 		DBF_DEV_EVENT(DBF_EMERG, device, "%s",
 			      "SORRY - NO VALID SENSE AVAILABLE\n");
diff --git a/drivers/s390/block/dasd_erp.c b/drivers/s390/block/dasd_erp.c
index d970ce2814b..cb8f9cef742 100644
--- a/drivers/s390/block/dasd_erp.c
+++ b/drivers/s390/block/dasd_erp.c
@@ -172,7 +172,7 @@ dasd_log_sense_dbf(struct dasd_ccw_req *cqr, struct irb *irb)
 	device = cqr->startdev;
 	/* dump sense data to s390 debugfeature*/
 	if (device->discipline && device->discipline->dump_sense_dbf)
-		device->discipline->dump_sense_dbf(device, cqr, irb, "log");
+		device->discipline->dump_sense_dbf(device, irb, "log");
 }
 EXPORT_SYMBOL(dasd_log_sense_dbf);
 
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index e21ee735f92..31849ad5e59 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -241,7 +241,7 @@ static void dasd_fba_handle_unsolicited_interrupt(struct dasd_device *device,
 	/* check for unsolicited interrupts */
 	DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 		    "unsolicited interrupt received");
-	device->discipline->dump_sense_dbf(device, NULL, irb, "unsolicited");
+	device->discipline->dump_sense_dbf(device, irb, "unsolicited");
 	dasd_schedule_device_bh(device);
 	return;
 };
@@ -444,17 +444,20 @@ dasd_fba_fill_info(struct dasd_device * device,
 }
 
 static void
-dasd_fba_dump_sense_dbf(struct dasd_device *device, struct dasd_ccw_req *req,
-			 struct irb *irb, char *reason)
+dasd_fba_dump_sense_dbf(struct dasd_device *device, struct irb *irb,
+			char *reason)
 {
-	int sl;
-	if (irb->esw.esw0.erw.cons) {
-		for (sl = 0; sl < 4; sl++) {
-			DBF_DEV_EVENT(DBF_EMERG, device,
-				      "%s: %08x %08x %08x %08x",
-				      reason, irb->ecw[8 * 0], irb->ecw[8 * 1],
-				      irb->ecw[8 * 2], irb->ecw[8 * 3]);
-		}
+	u64 *sense;
+
+	sense = (u64 *) dasd_get_sense(irb);
+	if (sense) {
+		DBF_DEV_EVENT(DBF_EMERG, device,
+			      "%s: %s %02x%02x%02x %016llx %016llx %016llx "
+			      "%016llx", reason,
+			      scsw_is_tm(&irb->scsw) ? "t" : "c",
+			      scsw_cc(&irb->scsw), scsw_cstat(&irb->scsw),
+			      scsw_dstat(&irb->scsw), sense[0], sense[1],
+			      sense[2], sense[3]);
 	} else {
 		DBF_DEV_EVENT(DBF_EMERG, device, "%s",
 			      "SORRY - NO VALID SENSE AVAILABLE\n");
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index fd63b2f2bda..b699ca356ac 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -284,8 +284,7 @@ struct dasd_discipline {
 	dasd_erp_fn_t(*erp_postaction) (struct dasd_ccw_req *);
 	void (*dump_sense) (struct dasd_device *, struct dasd_ccw_req *,
 			    struct irb *);
-	void (*dump_sense_dbf) (struct dasd_device *, struct dasd_ccw_req *,
-			    struct irb *, char *);
+	void (*dump_sense_dbf) (struct dasd_device *, struct irb *, char *);
 
 	void (*handle_unsolicited_interrupt) (struct dasd_device *,
 					      struct irb *);
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index 4ce3f72ee1c..df918ef2796 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -16,6 +16,7 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/blkpg.h>
+#include <linux/smp_lock.h>
 
 #include <asm/ccwdev.h>
 #include <asm/cmb.h>
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index 016f9e9d259..d34617682a6 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -964,7 +964,8 @@ static int dcssblk_freeze(struct device *dev)
 			break;
 	}
 	if (rc)
-		pr_err("Suspend failed because device %s is writeable.\n",
+		pr_err("Suspending the system failed because DCSS device %s "
+		       "is writable\n",
 		       dev_info->segment_name);
 	return rc;
 }
@@ -987,8 +988,8 @@ static int dcssblk_restore(struct device *dev)
 				goto out_panic;
 			}
 			if (start != entry->start || end != entry->end) {
-				pr_err("Mismatch of start / end address after "
-				       "resuming device %s\n",
+				pr_err("The address range of DCSS %s changed "
+				       "while the system was suspended\n",
 				       entry->segment_name);
 				goto out_panic;
 			}
diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c
index 2e9e1ecd6d8..db442cd6621 100644
--- a/drivers/s390/block/xpram.c
+++ b/drivers/s390/block/xpram.c
@@ -443,7 +443,7 @@ fail:
  */
 static void xpram_resume_error(const char *message)
 {
-	pr_err("Resume error: %s\n", message);
+	pr_err("Resuming the system failed: %s\n", message);
 	panic("xpram resume error\n");
 }
 
diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c
index 7892550d793..3234e90bd7f 100644
--- a/drivers/s390/char/monreader.c
+++ b/drivers/s390/char/monreader.c
@@ -320,7 +320,7 @@ static int mon_open(struct inode *inode, struct file *filp)
 		goto out_path;
 	}
 	filp->private_data = monpriv;
-	dev_set_drvdata(&monreader_device, monpriv);
+	dev_set_drvdata(monreader_device, monpriv);
 	unlock_kernel();
 	return nonseekable_open(inode, filp);
 
@@ -463,7 +463,7 @@ static struct miscdevice mon_dev = {
  *****************************************************************************/
 static int monreader_freeze(struct device *dev)
 {
-	struct mon_private *monpriv = dev_get_drvdata(&dev);
+	struct mon_private *monpriv = dev_get_drvdata(dev);
 	int rc;
 
 	if (!monpriv)
diff --git a/drivers/s390/char/sclp_rw.h b/drivers/s390/char/sclp_rw.h
index 85f491ea929..7a7bfc947d9 100644
--- a/drivers/s390/char/sclp_rw.h
+++ b/drivers/s390/char/sclp_rw.h
@@ -92,5 +92,10 @@ void sclp_set_columns(struct sclp_buffer *, unsigned short);
 void sclp_set_htab(struct sclp_buffer *, unsigned short);
 int sclp_chars_in_buffer(struct sclp_buffer *);
 
+#ifdef CONFIG_SCLP_CONSOLE
 void sclp_console_pm_event(enum sclp_pm_event sclp_pm_event);
+#else
+static inline void sclp_console_pm_event(enum sclp_pm_event sclp_pm_event) { }
+#endif
+
 #endif	/* __SCLP_RW_H__ */
diff --git a/drivers/s390/char/vmwatchdog.c b/drivers/s390/char/vmwatchdog.c
index cb7854c10c0..f2bc287b69e 100644
--- a/drivers/s390/char/vmwatchdog.c
+++ b/drivers/s390/char/vmwatchdog.c
@@ -250,14 +250,14 @@ static int vmwdt_resume(void)
 static int vmwdt_suspend(void)
 {
 	if (test_and_set_bit(VMWDT_OPEN, &vmwdt_is_open)) {
-		pr_err("The watchdog is in use. "
-			"This prevents hibernation or suspend.\n");
+		pr_err("The system cannot be suspended while the watchdog"
+			" is in use\n");
 		return NOTIFY_BAD;
 	}
 	if (test_bit(VMWDT_RUNNING, &vmwdt_is_open)) {
 		clear_bit(VMWDT_OPEN, &vmwdt_is_open);
-		pr_err("The watchdog is running. "
-			"This prevents hibernation or suspend.\n");
+		pr_err("The system cannot be suspended while the watchdog"
+			" is running\n");
 		return NOTIFY_BAD;
 	}
 	return NOTIFY_DONE;
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 3c57c1a18bb..d593bc76afe 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -772,10 +772,8 @@ static struct ccw_device * io_subchannel_create_ccwdev(struct subchannel *sch)
 	cdev = io_subchannel_allocate_dev(sch);
 	if (!IS_ERR(cdev)) {
 		ret = io_subchannel_initialize_dev(sch, cdev);
-		if (ret) {
-			kfree(cdev);
+		if (ret)
 			cdev = ERR_PTR(ret);
-		}
 	}
 	return cdev;
 }
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 727a809636d..ed3dcdea7fe 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -1145,12 +1145,17 @@ ap_config_timeout(unsigned long ptr)
  */
 static inline void ap_schedule_poll_timer(void)
 {
+	ktime_t hr_time;
 	if (ap_using_interrupts() || ap_suspend_flag)
 		return;
 	if (hrtimer_is_queued(&ap_poll_timer))
 		return;
-	hrtimer_start(&ap_poll_timer, ktime_set(0, poll_timeout),
-		      HRTIMER_MODE_ABS);
+	if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) {
+		hr_time = ktime_set(0, poll_timeout);
+		hrtimer_forward_now(&ap_poll_timer, hr_time);
+		hrtimer_restart(&ap_poll_timer);
+	}
+	return;
 }
 
 /**
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 8030e25152f..c75d6f35cb5 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -553,40 +553,35 @@ static void _zfcp_erp_unit_reopen_all(struct zfcp_port *port, int clear,
 		_zfcp_erp_unit_reopen(unit, clear, id, ref);
 }
 
-static void zfcp_erp_strategy_followup_actions(struct zfcp_erp_action *act)
+static void zfcp_erp_strategy_followup_failed(struct zfcp_erp_action *act)
 {
-	struct zfcp_adapter *adapter = act->adapter;
-	struct zfcp_port *port = act->port;
-	struct zfcp_unit *unit = act->unit;
-	u32 status = act->status;
-
-	/* initiate follow-up actions depending on success of finished action */
 	switch (act->action) {
-
 	case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
-		if (status == ZFCP_ERP_SUCCEEDED)
-			_zfcp_erp_port_reopen_all(adapter, 0, "ersfa_1", NULL);
-		else
-			_zfcp_erp_adapter_reopen(adapter, 0, "ersfa_2", NULL);
+		_zfcp_erp_adapter_reopen(act->adapter, 0, "ersff_1", NULL);
 		break;
-
 	case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
-		if (status == ZFCP_ERP_SUCCEEDED)
-			_zfcp_erp_port_reopen(port, 0, "ersfa_3", NULL);
-		else
-			_zfcp_erp_adapter_reopen(adapter, 0, "ersfa_4", NULL);
+		_zfcp_erp_port_forced_reopen(act->port, 0, "ersff_2", NULL);
 		break;
-
 	case ZFCP_ERP_ACTION_REOPEN_PORT:
-		if (status == ZFCP_ERP_SUCCEEDED)
-			_zfcp_erp_unit_reopen_all(port, 0, "ersfa_5", NULL);
-		else
-			_zfcp_erp_port_forced_reopen(port, 0, "ersfa_6", NULL);
+		_zfcp_erp_port_reopen(act->port, 0, "ersff_3", NULL);
 		break;
-
 	case ZFCP_ERP_ACTION_REOPEN_UNIT:
-		if (status != ZFCP_ERP_SUCCEEDED)
-			_zfcp_erp_port_reopen(unit->port, 0, "ersfa_7", NULL);
+		_zfcp_erp_unit_reopen(act->unit, 0, "ersff_4", NULL);
+		break;
+	}
+}
+
+static void zfcp_erp_strategy_followup_success(struct zfcp_erp_action *act)
+{
+	switch (act->action) {
+	case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
+		_zfcp_erp_port_reopen_all(act->adapter, 0, "ersfs_1", NULL);
+		break;
+	case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
+		_zfcp_erp_port_reopen(act->port, 0, "ersfs_2", NULL);
+		break;
+	case ZFCP_ERP_ACTION_REOPEN_PORT:
+		_zfcp_erp_unit_reopen_all(act->port, 0, "ersfs_3", NULL);
 		break;
 	}
 }
@@ -801,7 +796,7 @@ static int zfcp_erp_port_forced_strategy(struct zfcp_erp_action *erp_action)
 			return ZFCP_ERP_FAILED;
 
 	case ZFCP_ERP_STEP_PHYS_PORT_CLOSING:
-		if (status & ZFCP_STATUS_PORT_PHYS_OPEN)
+		if (!(status & ZFCP_STATUS_PORT_PHYS_OPEN))
 			return ZFCP_ERP_SUCCEEDED;
 	}
 	return ZFCP_ERP_FAILED;
@@ -853,11 +848,17 @@ void zfcp_erp_port_strategy_open_lookup(struct work_struct *work)
 					      gid_pn_work);
 
 	retval = zfcp_fc_ns_gid_pn(&port->erp_action);
-	if (retval == -ENOMEM)
-		zfcp_erp_notify(&port->erp_action, ZFCP_ERP_NOMEM);
-	port->erp_action.step = ZFCP_ERP_STEP_NAMESERVER_LOOKUP;
-	if (retval)
-		zfcp_erp_notify(&port->erp_action, ZFCP_ERP_FAILED);
+	if (!retval) {
+		port->erp_action.step = ZFCP_ERP_STEP_NAMESERVER_LOOKUP;
+		goto out;
+	}
+	if (retval == -ENOMEM) {
+		zfcp_erp_notify(&port->erp_action, ZFCP_STATUS_ERP_LOWMEM);
+		goto out;
+	}
+	/* all other error condtions */
+	zfcp_erp_notify(&port->erp_action, 0);
+out:
 	zfcp_port_put(port);
 }
 
@@ -1289,7 +1290,10 @@ static int zfcp_erp_strategy(struct zfcp_erp_action *erp_action)
 	retval = zfcp_erp_strategy_statechange(erp_action, retval);
 	if (retval == ZFCP_ERP_EXIT)
 		goto unlock;
-	zfcp_erp_strategy_followup_actions(erp_action);
+	if (retval == ZFCP_ERP_SUCCEEDED)
+		zfcp_erp_strategy_followup_success(erp_action);
+	if (retval == ZFCP_ERP_FAILED)
+		zfcp_erp_strategy_followup_failed(erp_action);
 
  unlock:
 	write_unlock(&adapter->erp_lock);
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 2f0705d76b7..47daebfa7e5 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -79,11 +79,9 @@ static int zfcp_wka_port_get(struct zfcp_wka_port *wka_port)
 
 	mutex_unlock(&wka_port->mutex);
 
-	wait_event_timeout(
-		wka_port->completion_wq,
-		wka_port->status == ZFCP_WKA_PORT_ONLINE ||
-		wka_port->status == ZFCP_WKA_PORT_OFFLINE,
-		HZ >> 1);
+	wait_event(wka_port->completion_wq,
+		   wka_port->status == ZFCP_WKA_PORT_ONLINE ||
+		   wka_port->status == ZFCP_WKA_PORT_OFFLINE);
 
 	if (wka_port->status == ZFCP_WKA_PORT_ONLINE) {
 		atomic_inc(&wka_port->refcount);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index c57658f3d34..47795fbf081 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -670,8 +670,11 @@ static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
 			       zfcp_fsf_sbal_check(adapter), 5 * HZ);
 	if (ret > 0)
 		return 0;
-	if (!ret)
+	if (!ret) {
 		atomic_inc(&adapter->qdio_outb_full);
+		/* assume hanging outbound queue, try queue recovery */
+		zfcp_erp_adapter_reopen(adapter, 0, "fsrsg_1", NULL);
+	}
 
 	spin_lock_bh(&adapter->req_q_lock);
 	return -EIO;
@@ -722,7 +725,7 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_adapter *adapter,
 		req = zfcp_fsf_alloc_qtcb(pool);
 
 	if (unlikely(!req))
-		return ERR_PTR(-EIO);
+		return ERR_PTR(-ENOMEM);
 
 	if (adapter->req_no == 0)
 		adapter->req_no++;
@@ -1010,6 +1013,23 @@ skip_fsfstatus:
 		send_ct->handler(send_ct->handler_data);
 }
 
+static void zfcp_fsf_setup_ct_els_unchained(struct qdio_buffer_element *sbale,
+					    struct scatterlist *sg_req,
+					    struct scatterlist *sg_resp)
+{
+	sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ;
+	sbale[2].addr   = sg_virt(sg_req);
+	sbale[2].length = sg_req->length;
+	sbale[3].addr   = sg_virt(sg_resp);
+	sbale[3].length = sg_resp->length;
+	sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY;
+}
+
+static int zfcp_fsf_one_sbal(struct scatterlist *sg)
+{
+	return sg_is_last(sg) && sg->length <= PAGE_SIZE;
+}
+
 static int zfcp_fsf_setup_ct_els_sbals(struct zfcp_fsf_req *req,
 				       struct scatterlist *sg_req,
 				       struct scatterlist *sg_resp,
@@ -1020,30 +1040,30 @@ static int zfcp_fsf_setup_ct_els_sbals(struct zfcp_fsf_req *req,
 	int bytes;
 
 	if (!(feat & FSF_FEATURE_ELS_CT_CHAINED_SBALS)) {
-		if (sg_req->length > PAGE_SIZE || sg_resp->length > PAGE_SIZE ||
-		    !sg_is_last(sg_req) || !sg_is_last(sg_resp))
+		if (!zfcp_fsf_one_sbal(sg_req) || !zfcp_fsf_one_sbal(sg_resp))
 			return -EOPNOTSUPP;
 
-		sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ;
-		sbale[2].addr   = sg_virt(sg_req);
-		sbale[2].length = sg_req->length;
-		sbale[3].addr   = sg_virt(sg_resp);
-		sbale[3].length = sg_resp->length;
-		sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY;
+		zfcp_fsf_setup_ct_els_unchained(sbale, sg_req, sg_resp);
+		return 0;
+	}
+
+	/* use single, unchained SBAL if it can hold the request */
+	if (zfcp_fsf_one_sbal(sg_req) && zfcp_fsf_one_sbal(sg_resp)) {
+		zfcp_fsf_setup_ct_els_unchained(sbale, sg_req, sg_resp);
 		return 0;
 	}
 
 	bytes = zfcp_qdio_sbals_from_sg(req, SBAL_FLAGS0_TYPE_WRITE_READ,
 					sg_req, max_sbals);
 	if (bytes <= 0)
-		return -ENOMEM;
+		return -EIO;
 	req->qtcb->bottom.support.req_buf_length = bytes;
 	req->sbale_curr = ZFCP_LAST_SBALE_PER_SBAL;
 
 	bytes = zfcp_qdio_sbals_from_sg(req, SBAL_FLAGS0_TYPE_WRITE_READ,
 					sg_resp, max_sbals);
 	if (bytes <= 0)
-		return -ENOMEM;
+		return -EIO;
 	req->qtcb->bottom.support.resp_buf_length = bytes;
 
 	return 0;
@@ -1607,10 +1627,10 @@ static void zfcp_fsf_open_wka_port_handler(struct zfcp_fsf_req *req)
 	case FSF_ACCESS_DENIED:
 		wka_port->status = ZFCP_WKA_PORT_OFFLINE;
 		break;
-	case FSF_PORT_ALREADY_OPEN:
-		break;
 	case FSF_GOOD:
 		wka_port->handle = header->port_handle;
+		/* fall through */
+	case FSF_PORT_ALREADY_OPEN:
 		wka_port->status = ZFCP_WKA_PORT_ONLINE;
 	}
 out:
@@ -1731,15 +1751,16 @@ static void zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *req)
 		zfcp_fsf_access_denied_port(req, port);
 		break;
 	case FSF_PORT_BOXED:
-		zfcp_erp_port_boxed(port, "fscpph2", req);
-		req->status |= ZFCP_STATUS_FSFREQ_ERROR |
-			       ZFCP_STATUS_FSFREQ_RETRY;
 		/* can't use generic zfcp_erp_modify_port_status because
 		 * ZFCP_STATUS_COMMON_OPEN must not be reset for the port */
 		atomic_clear_mask(ZFCP_STATUS_PORT_PHYS_OPEN, &port->status);
 		list_for_each_entry(unit, &port->unit_list_head, list)
 			atomic_clear_mask(ZFCP_STATUS_COMMON_OPEN,
 					  &unit->status);
+		zfcp_erp_port_boxed(port, "fscpph2", req);
+		req->status |= ZFCP_STATUS_FSFREQ_ERROR |
+			       ZFCP_STATUS_FSFREQ_RETRY;
+
 		break;
 	case FSF_ADAPTER_STATUS_AVAILABLE:
 		switch (header->fsf_status_qual.word[0]) {
@@ -2541,7 +2562,6 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter,
 	bytes = zfcp_qdio_sbals_from_sg(req, direction, fsf_cfdc->sg,
 					FSF_MAX_SBALS_PER_REQ);
 	if (bytes != ZFCP_CFDC_MAX_SIZE) {
-		retval = -ENOMEM;
 		zfcp_fsf_req_free(req);
 		goto out;
 	}
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 967ede73f4c..6925a178468 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -167,20 +167,21 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
 	struct zfcp_unit *unit = scpnt->device->hostdata;
 	struct zfcp_fsf_req *old_req, *abrt_req;
 	unsigned long flags;
-	unsigned long old_req_id = (unsigned long) scpnt->host_scribble;
+	unsigned long old_reqid = (unsigned long) scpnt->host_scribble;
 	int retval = SUCCESS;
 	int retry = 3;
+	char *dbf_tag;
 
 	/* avoid race condition between late normal completion and abort */
 	write_lock_irqsave(&adapter->abort_lock, flags);
 
 	spin_lock(&adapter->req_list_lock);
-	old_req = zfcp_reqlist_find(adapter, old_req_id);
+	old_req = zfcp_reqlist_find(adapter, old_reqid);
 	spin_unlock(&adapter->req_list_lock);
 	if (!old_req) {
 		write_unlock_irqrestore(&adapter->abort_lock, flags);
 		zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL,
-					  old_req_id);
+					  old_reqid);
 		return FAILED; /* completion could be in progress */
 	}
 	old_req->data = NULL;
@@ -189,7 +190,7 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
 	write_unlock_irqrestore(&adapter->abort_lock, flags);
 
 	while (retry--) {
-		abrt_req = zfcp_fsf_abort_fcp_command(old_req_id, unit);
+		abrt_req = zfcp_fsf_abort_fcp_command(old_reqid, unit);
 		if (abrt_req)
 			break;
 
@@ -197,7 +198,7 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
 		if (!(atomic_read(&adapter->status) &
 		      ZFCP_STATUS_COMMON_RUNNING)) {
 			zfcp_scsi_dbf_event_abort("nres", adapter, scpnt, NULL,
-						  old_req_id);
+						  old_reqid);
 			return SUCCESS;
 		}
 	}
@@ -208,13 +209,14 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
 		   abrt_req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
 
 	if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED)
-		zfcp_scsi_dbf_event_abort("okay", adapter, scpnt, abrt_req, 0);
+		dbf_tag = "okay";
 	else if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED)
-		zfcp_scsi_dbf_event_abort("lte2", adapter, scpnt, abrt_req, 0);
+		dbf_tag = "lte2";
 	else {
-		zfcp_scsi_dbf_event_abort("fail", adapter, scpnt, abrt_req, 0);
+		dbf_tag = "fail";
 		retval = FAILED;
 	}
+	zfcp_scsi_dbf_event_abort(dbf_tag, adapter, scpnt, abrt_req, old_reqid);
 	zfcp_fsf_req_free(abrt_req);
 	return retval;
 }
@@ -534,6 +536,9 @@ static void zfcp_scsi_rport_register(struct zfcp_port *port)
 	struct fc_rport_identifiers ids;
 	struct fc_rport *rport;
 
+	if (port->rport)
+		return;
+
 	ids.node_name = port->wwnn;
 	ids.port_name = port->wwpn;
 	ids.port_id = port->d_id;
@@ -557,8 +562,10 @@ static void zfcp_scsi_rport_block(struct zfcp_port *port)
 {
 	struct fc_rport *rport = port->rport;
 
-	if (rport)
+	if (rport) {
 		fc_remote_port_delete(rport);
+		port->rport = NULL;
+	}
 }
 
 void zfcp_scsi_schedule_rport_register(struct zfcp_port *port)
diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c
index 3e51e64d110..0fe5cce818c 100644
--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -494,9 +494,14 @@ static ssize_t zfcp_sysfs_adapter_q_full_show(struct device *dev,
 	struct Scsi_Host *scsi_host = class_to_shost(dev);
 	struct zfcp_adapter *adapter =
 		(struct zfcp_adapter *) scsi_host->hostdata[0];
+	u64 util;
+
+	spin_lock_bh(&adapter->qdio_stat_lock);
+	util = adapter->req_q_util;
+	spin_unlock_bh(&adapter->qdio_stat_lock);
 
 	return sprintf(buf, "%d %llu\n", atomic_read(&adapter->qdio_outb_full),
-		       (unsigned long long)adapter->req_q_util);
+		       (unsigned long long)util);
 }
 static DEVICE_ATTR(queue_full, S_IRUGO, zfcp_sysfs_adapter_q_full_show, NULL);
 
diff --git a/drivers/sbus/char/bbc_envctrl.c b/drivers/sbus/char/bbc_envctrl.c
index 15dab96d05e..7c815d3327f 100644
--- a/drivers/sbus/char/bbc_envctrl.c
+++ b/drivers/sbus/char/bbc_envctrl.c
@@ -537,8 +537,12 @@ int bbc_envctrl_init(struct bbc_i2c_bus *bp)
 	}
 	if (temp_index != 0 && fan_index != 0) {
 		kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
-		if (IS_ERR(kenvctrld_task))
-			return PTR_ERR(kenvctrld_task);
+		if (IS_ERR(kenvctrld_task)) {
+			int err = PTR_ERR(kenvctrld_task);
+
+			kenvctrld_task = NULL;
+			return err;
+		}
 	}
 
 	return 0;
@@ -561,7 +565,8 @@ void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp)
 	struct bbc_cpu_temperature *tp, *tpos;
 	struct bbc_fan_control *fp, *fpos;
 
-	kthread_stop(kenvctrld_task);
+	if (kenvctrld_task)
+		kthread_stop(kenvctrld_task);
 
 	list_for_each_entry_safe(tp, tpos, &bp->temps, bp_list) {
 		list_del(&tp->bp_list);
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 0471f880048..4240b05aef6 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -2826,8 +2826,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
 	 */
 
 	local_irq_restore(flags);
-	printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n"
-	       KERN_INFO "        before abortion\n", HOSTNO);
+	printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);
 
 	/* Maybe it is sufficient just to release the ST-DMA lock... (if
 	 * possible at all) At least, we should check if the lock could be
diff --git a/drivers/scsi/cxgb3i/Kbuild b/drivers/scsi/cxgb3i/Kbuild
index 25a2032bfa2..70d060b7ff4 100644
--- a/drivers/scsi/cxgb3i/Kbuild
+++ b/drivers/scsi/cxgb3i/Kbuild
@@ -1,4 +1,4 @@
-EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/cxgb3
+EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb3
 
 cxgb3i-y := cxgb3i_init.o cxgb3i_iscsi.o cxgb3i_pdu.o cxgb3i_offload.o cxgb3i_ddp.o
 obj-$(CONFIG_SCSI_CXGB3_ISCSI) += cxgb3i.o
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index 74369a3f963..c399f485aa7 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -13,6 +13,7 @@
 
 #include <linux/inet.h>
 #include <linux/crypto.h>
+#include <linux/if_vlan.h>
 #include <net/dst.h>
 #include <net/tcp.h>
 #include <scsi/scsi_cmnd.h>
@@ -184,6 +185,9 @@ static struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev)
 	struct cxgb3i_adapter *snic;
 	int i;
 
+	if (ndev->priv_flags & IFF_802_1Q_VLAN)
+		ndev = vlan_dev_real_dev(ndev);
+
 	read_lock(&cxgb3i_snic_rwlock);
 	list_for_each_entry(snic, &cxgb3i_snic_list, list_head) {
 		for (i = 0; i < snic->hba_cnt; i++) {
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index a84072865fc..2c266c01dc5 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -473,16 +473,16 @@ static int __devinit fnic_probe(struct pci_dev *pdev,
 	 * limitation for the device.  Try 40-bit first, and
 	 * fail to 32-bit.
 	 */
-	err = pci_set_dma_mask(pdev, DMA_40BIT_MASK);
+	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(40));
 	if (err) {
-		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (err) {
 			shost_printk(KERN_ERR, fnic->lport->host,
 				     "No usable DMA configuration "
 				     "aborting\n");
 			goto err_out_release_regions;
 		}
-		err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (err) {
 			shost_printk(KERN_ERR, fnic->lport->host,
 				     "Unable to obtain 32-bit DMA "
@@ -490,7 +490,7 @@ static int __devinit fnic_probe(struct pci_dev *pdev,
 			goto err_out_release_regions;
 		}
 	} else {
-		err = pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK);
+		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40));
 		if (err) {
 			shost_printk(KERN_ERR, fnic->lport->host,
 				     "Unable to obtain 40-bit DMA "
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index eabf3650285..bfc996971b8 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -245,7 +245,7 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
 					  struct vnic_wq_copy *wq,
 					  struct fnic_io_req *io_req,
 					  struct scsi_cmnd *sc,
-					  u32 sg_count)
+					  int sg_count)
 {
 	struct scatterlist *sg;
 	struct fc_rport *rport = starget_to_rport(scsi_target(sc->device));
@@ -260,9 +260,6 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
 	char msg[2];
 
 	if (sg_count) {
-		BUG_ON(sg_count < 0);
-		BUG_ON(sg_count > FNIC_MAX_SG_DESC_CNT);
-
 		/* For each SGE, create a device desc entry */
 		desc = io_req->sgl_list;
 		for_each_sg(scsi_sglist(sc), sg, sg_count, i) {
@@ -344,7 +341,7 @@ int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 	struct fnic *fnic;
 	struct vnic_wq_copy *wq;
 	int ret;
-	u32 sg_count;
+	int sg_count;
 	unsigned long flags;
 	unsigned long ptr;
 
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 869a11bdccb..9928704e235 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1095,9 +1095,14 @@ static void adapter_info_rsp(struct srp_event_struct *evt_struct)
 				MAX_INDIRECT_BUFS);
 			hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS;
 		}
+
+		if (hostdata->madapter_info.os_type == 3) {
+			enable_fast_fail(hostdata);
+			return;
+		}
 	}
 
-	enable_fast_fail(hostdata);
+	send_srp_login(hostdata);
 }
 
 /**
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 2bc22be5f84..145ab9ba55e 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -415,9 +415,9 @@ static void fc_exch_timeout(struct work_struct *work)
 	e_stat = ep->esb_stat;
 	if (e_stat & ESB_ST_COMPLETE) {
 		ep->esb_stat = e_stat & ~ESB_ST_REC_QUAL;
+		spin_unlock_bh(&ep->ex_lock);
 		if (e_stat & ESB_ST_REC_QUAL)
 			fc_exch_rrq(ep);
-		spin_unlock_bh(&ep->ex_lock);
 		goto done;
 	} else {
 		resp = ep->resp;
@@ -1624,14 +1624,14 @@ static void fc_exch_rrq(struct fc_exch *ep)
 	struct fc_lport *lp;
 	struct fc_els_rrq *rrq;
 	struct fc_frame *fp;
-	struct fc_seq *rrq_sp;
 	u32 did;
 
 	lp = ep->lp;
 
 	fp = fc_frame_alloc(lp, sizeof(*rrq));
 	if (!fp)
-		return;
+		goto retry;
+
 	rrq = fc_frame_payload_get(fp, sizeof(*rrq));
 	memset(rrq, 0, sizeof(*rrq));
 	rrq->rrq_cmd = ELS_RRQ;
@@ -1647,13 +1647,20 @@ static void fc_exch_rrq(struct fc_exch *ep)
 		       fc_host_port_id(lp->host), FC_TYPE_ELS,
 		       FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
 
-	rrq_sp = fc_exch_seq_send(lp, fp, fc_exch_rrq_resp, NULL, ep,
-				  lp->e_d_tov);
-	if (!rrq_sp) {
-		ep->esb_stat |= ESB_ST_REC_QUAL;
-		fc_exch_timer_set_locked(ep, ep->r_a_tov);
+	if (fc_exch_seq_send(lp, fp, fc_exch_rrq_resp, NULL, ep, lp->e_d_tov))
+		return;
+
+retry:
+	spin_lock_bh(&ep->ex_lock);
+	if (ep->state & (FC_EX_RST_CLEANUP | FC_EX_DONE)) {
+		spin_unlock_bh(&ep->ex_lock);
+		/* drop hold for rec qual */
+		fc_exch_release(ep);
 		return;
 	}
+	ep->esb_stat |= ESB_ST_REC_QUAL;
+	fc_exch_timer_set_locked(ep, ep->r_a_tov);
+	spin_unlock_bh(&ep->ex_lock);
 }
 
 
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 716cc344c5d..a751f6230c2 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1974,10 +1974,10 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 		 * good and have never sent us a successful tmf response
 		 * then sent more data for the cmd.
 		 */
-		spin_lock(&session->lock);
+		spin_lock_bh(&session->lock);
 		fail_scsi_task(task, DID_ABORT);
 		conn->tmf_state = TMF_INITIAL;
-		spin_unlock(&session->lock);
+		spin_unlock_bh(&session->lock);
 		iscsi_start_tx(conn);
 		goto success_unlocked;
 	case TMF_TIMEDOUT:
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 54fa1e42dc4..b3381959acc 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -766,6 +766,7 @@ static int sas_ex_join_wide_port(struct domain_device *parent, int phy_id)
 		if (!memcmp(phy->attached_sas_addr, ephy->attached_sas_addr,
 			    SAS_ADDR_SIZE) && ephy->port) {
 			sas_port_add_phy(ephy->port, phy->phy);
+			phy->port = ephy->port;
 			phy->phy_state = PHY_DEVICE_DISCOVERED;
 			return 0;
 		}
@@ -945,11 +946,21 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
 			if (ex->ex_phy[i].phy_state == PHY_VACANT ||
 			    ex->ex_phy[i].phy_state == PHY_NOT_PRESENT)
 				continue;
-
+			/*
+			 * Due to races, the phy might not get added to the
+			 * wide port, so we add the phy to the wide port here.
+			 */
 			if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) ==
-			    SAS_ADDR(child->sas_addr))
+			    SAS_ADDR(child->sas_addr)) {
 				ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
+				res = sas_ex_join_wide_port(dev, i);
+				if (!res)
+					SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n",
+						    i, SAS_ADDR(ex->ex_phy[i].attached_sas_addr));
+
+			}
 		}
+		res = 0;
 	}
 
 	return res;
@@ -1598,7 +1609,7 @@ static int sas_get_phy_attached_sas_addr(struct domain_device *dev,
 }
 
 static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
-			      int from_phy)
+			      int from_phy, bool update)
 {
 	struct expander_device *ex = &dev->ex_dev;
 	int res = 0;
@@ -1611,7 +1622,9 @@ static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
 		if (res)
 			goto out;
 		else if (phy_change_count != ex->ex_phy[i].phy_change_count) {
-			ex->ex_phy[i].phy_change_count = phy_change_count;
+			if (update)
+				ex->ex_phy[i].phy_change_count =
+					phy_change_count;
 			*phy_id = i;
 			return 0;
 		}
@@ -1653,31 +1666,52 @@ out:
 	kfree(rg_req);
 	return res;
 }
+/**
+ * sas_find_bcast_dev -  find the device issue BROADCAST(CHANGE).
+ * @dev:domain device to be detect.
+ * @src_dev: the device which originated BROADCAST(CHANGE).
+ *
+ * Add self-configuration expander suport. Suppose two expander cascading,
+ * when the first level expander is self-configuring, hotplug the disks in
+ * second level expander, BROADCAST(CHANGE) will not only be originated
+ * in the second level expander, but also be originated in the first level
+ * expander (see SAS protocol SAS 2r-14, 7.11 for detail), it is to say,
+ * expander changed count in two level expanders will all increment at least
+ * once, but the phy which chang count has changed is the source device which
+ * we concerned.
+ */
 
 static int sas_find_bcast_dev(struct domain_device *dev,
 			      struct domain_device **src_dev)
 {
 	struct expander_device *ex = &dev->ex_dev;
 	int ex_change_count = -1;
+	int phy_id = -1;
 	int res;
+	struct domain_device *ch;
 
 	res = sas_get_ex_change_count(dev, &ex_change_count);
 	if (res)
 		goto out;
-	if (ex_change_count != -1 &&
-	    ex_change_count != ex->ex_change_count) {
-		*src_dev = dev;
-		ex->ex_change_count = ex_change_count;
-	} else {
-		struct domain_device *ch;
-
-		list_for_each_entry(ch, &ex->children, siblings) {
-			if (ch->dev_type == EDGE_DEV ||
-			    ch->dev_type == FANOUT_DEV) {
-				res = sas_find_bcast_dev(ch, src_dev);
-				if (src_dev)
-					return res;
-			}
+	if (ex_change_count != -1 && ex_change_count != ex->ex_change_count) {
+		/* Just detect if this expander phys phy change count changed,
+		* in order to determine if this expander originate BROADCAST,
+		* and do not update phy change count field in our structure.
+		*/
+		res = sas_find_bcast_phy(dev, &phy_id, 0, false);
+		if (phy_id != -1) {
+			*src_dev = dev;
+			ex->ex_change_count = ex_change_count;
+			SAS_DPRINTK("Expander phy change count has changed\n");
+			return res;
+		} else
+			SAS_DPRINTK("Expander phys DID NOT change\n");
+	}
+	list_for_each_entry(ch, &ex->children, siblings) {
+		if (ch->dev_type == EDGE_DEV || ch->dev_type == FANOUT_DEV) {
+			res = sas_find_bcast_dev(ch, src_dev);
+			if (src_dev)
+				return res;
 		}
 	}
 out:
@@ -1700,24 +1734,26 @@ static void sas_unregister_ex_tree(struct domain_device *dev)
 }
 
 static void sas_unregister_devs_sas_addr(struct domain_device *parent,
-					 int phy_id)
+					 int phy_id, bool last)
 {
 	struct expander_device *ex_dev = &parent->ex_dev;
 	struct ex_phy *phy = &ex_dev->ex_phy[phy_id];
 	struct domain_device *child, *n;
-
-	list_for_each_entry_safe(child, n, &ex_dev->children, siblings) {
-		if (SAS_ADDR(child->sas_addr) ==
-		    SAS_ADDR(phy->attached_sas_addr)) {
-			if (child->dev_type == EDGE_DEV ||
-			    child->dev_type == FANOUT_DEV)
-				sas_unregister_ex_tree(child);
-			else
-				sas_unregister_dev(child);
-			break;
+	if (last) {
+		list_for_each_entry_safe(child, n,
+			&ex_dev->children, siblings) {
+			if (SAS_ADDR(child->sas_addr) ==
+			    SAS_ADDR(phy->attached_sas_addr)) {
+				if (child->dev_type == EDGE_DEV ||
+				    child->dev_type == FANOUT_DEV)
+					sas_unregister_ex_tree(child);
+				else
+					sas_unregister_dev(child);
+				break;
+			}
 		}
+		sas_disable_routing(parent, phy->attached_sas_addr);
 	}
-	sas_disable_routing(parent, phy->attached_sas_addr);
 	memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
 	sas_port_delete_phy(phy->port, phy->phy);
 	if (phy->port->num_phys == 0)
@@ -1770,15 +1806,31 @@ static int sas_discover_new(struct domain_device *dev, int phy_id)
 {
 	struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id];
 	struct domain_device *child;
-	int res;
+	bool found = false;
+	int res, i;
 
 	SAS_DPRINTK("ex %016llx phy%d new device attached\n",
 		    SAS_ADDR(dev->sas_addr), phy_id);
 	res = sas_ex_phy_discover(dev, phy_id);
 	if (res)
 		goto out;
+	/* to support the wide port inserted */
+	for (i = 0; i < dev->ex_dev.num_phys; i++) {
+		struct ex_phy *ex_phy_temp = &dev->ex_dev.ex_phy[i];
+		if (i == phy_id)
+			continue;
+		if (SAS_ADDR(ex_phy_temp->attached_sas_addr) ==
+		    SAS_ADDR(ex_phy->attached_sas_addr)) {
+			found = true;
+			break;
+		}
+	}
+	if (found) {
+		sas_ex_join_wide_port(dev, phy_id);
+		return 0;
+	}
 	res = sas_ex_discover_devices(dev, phy_id);
-	if (res)
+	if (!res)
 		goto out;
 	list_for_each_entry(child, &dev->ex_dev.children, siblings) {
 		if (SAS_ADDR(child->sas_addr) ==
@@ -1793,7 +1845,7 @@ out:
 	return res;
 }
 
-static int sas_rediscover_dev(struct domain_device *dev, int phy_id)
+static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
 {
 	struct expander_device *ex = &dev->ex_dev;
 	struct ex_phy *phy = &ex->ex_phy[phy_id];
@@ -1804,11 +1856,11 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id)
 	switch (res) {
 	case SMP_RESP_NO_PHY:
 		phy->phy_state = PHY_NOT_PRESENT;
-		sas_unregister_devs_sas_addr(dev, phy_id);
+		sas_unregister_devs_sas_addr(dev, phy_id, last);
 		goto out; break;
 	case SMP_RESP_PHY_VACANT:
 		phy->phy_state = PHY_VACANT;
-		sas_unregister_devs_sas_addr(dev, phy_id);
+		sas_unregister_devs_sas_addr(dev, phy_id, last);
 		goto out; break;
 	case SMP_RESP_FUNC_ACC:
 		break;
@@ -1816,7 +1868,7 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id)
 
 	if (SAS_ADDR(attached_sas_addr) == 0) {
 		phy->phy_state = PHY_EMPTY;
-		sas_unregister_devs_sas_addr(dev, phy_id);
+		sas_unregister_devs_sas_addr(dev, phy_id, last);
 	} else if (SAS_ADDR(attached_sas_addr) ==
 		   SAS_ADDR(phy->attached_sas_addr)) {
 		SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n",
@@ -1828,12 +1880,27 @@ out:
 	return res;
 }
 
+/**
+ * sas_rediscover - revalidate the domain.
+ * @dev:domain device to be detect.
+ * @phy_id: the phy id will be detected.
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered.  Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.For plugging out, we un-register the device only when it is
+ * the last phy in the port, for other phys in this port, we just delete it
+ * from the port.For inserting, we do discovery when it is the
+ * first phy,for other phys in this port, we add it to the port to
+ * forming the wide-port.
+ */
 static int sas_rediscover(struct domain_device *dev, const int phy_id)
 {
 	struct expander_device *ex = &dev->ex_dev;
 	struct ex_phy *changed_phy = &ex->ex_phy[phy_id];
 	int res = 0;
 	int i;
+	bool last = true;	/* is this the last phy of the port */
 
 	SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
 		    SAS_ADDR(dev->sas_addr), phy_id);
@@ -1848,13 +1915,13 @@ static int sas_rediscover(struct domain_device *dev, const int phy_id)
 			    SAS_ADDR(changed_phy->attached_sas_addr)) {
 				SAS_DPRINTK("phy%d part of wide port with "
 					    "phy%d\n", phy_id, i);
-				goto out;
+				last = false;
+				break;
 			}
 		}
-		res = sas_rediscover_dev(dev, phy_id);
+		res = sas_rediscover_dev(dev, phy_id, last);
 	} else
 		res = sas_discover_new(dev, phy_id);
-out:
 	return res;
 }
 
@@ -1881,7 +1948,7 @@ int sas_ex_revalidate_domain(struct domain_device *port_dev)
 
 		do {
 			phy_id = -1;
-			res = sas_find_bcast_phy(dev, &phy_id, i);
+			res = sas_find_bcast_phy(dev, &phy_id, i, true);
 			if (phy_id == -1)
 				break;
 			res = sas_rediscover(dev, phy_id);
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index e6ac59c023f..fe8b74c706d 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -56,7 +56,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
 		}
 	}
 
-	/* find a port */
+	/* see if the phy should be part of a wide port */
 	spin_lock_irqsave(&sas_ha->phy_port_lock, flags);
 	for (i = 0; i < sas_ha->num_phys; i++) {
 		port = sas_ha->sas_port[i];
@@ -69,12 +69,23 @@ static void sas_form_port(struct asd_sas_phy *phy)
 			SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
 				    port->id);
 			break;
-		} else if (*(u64 *) port->sas_addr == 0 && port->num_phys==0) {
-			memcpy(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE);
-			break;
 		}
 		spin_unlock(&port->phy_list_lock);
 	}
+	/* The phy does not match any existing port, create a new one */
+	if (i == sas_ha->num_phys) {
+		for (i = 0; i < sas_ha->num_phys; i++) {
+			port = sas_ha->sas_port[i];
+			spin_lock(&port->phy_list_lock);
+			if (*(u64 *)port->sas_addr == 0
+				&& port->num_phys == 0) {
+				memcpy(port->sas_addr, phy->sas_addr,
+					SAS_ADDR_SIZE);
+				break;
+			}
+			spin_unlock(&port->phy_list_lock);
+		}
+	}
 
 	if (i >= sas_ha->num_phys) {
 		printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index b12ad7c7c67..18735b39b3d 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -75,8 +75,9 @@ static int mac53c94_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *
 		int i;
 		printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd);
 		for (i = 0; i < cmd->cmd_len; ++i)
-			printk(" %.2x", cmd->cmnd[i]);
-		printk("\n" KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
+			printk(KERN_CONT " %.2x", cmd->cmnd[i]);
+		printk(KERN_CONT "\n");
+		printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
 		       scsi_sg_count(cmd), scsi_bufflen(cmd), scsi_sglist(cmd));
 	}
 #endif
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index f3da592f7bc..35a13867495 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -119,6 +119,64 @@ _base_fault_reset_work(struct work_struct *work)
 	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 }
 
+/**
+ * mpt2sas_base_start_watchdog - start the fault_reset_work_q
+ * @ioc: pointer to scsi command object
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc)
+{
+	unsigned long	 flags;
+
+	if (ioc->fault_reset_work_q)
+		return;
+
+	/* initialize fault polling */
+	INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
+	snprintf(ioc->fault_reset_work_q_name,
+	    sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
+	ioc->fault_reset_work_q =
+		create_singlethread_workqueue(ioc->fault_reset_work_q_name);
+	if (!ioc->fault_reset_work_q) {
+		printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
+		    ioc->name, __func__, __LINE__);
+			return;
+	}
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	if (ioc->fault_reset_work_q)
+		queue_delayed_work(ioc->fault_reset_work_q,
+		    &ioc->fault_reset_work,
+		    msecs_to_jiffies(FAULT_POLLING_INTERVAL));
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+}
+
+/**
+ * mpt2sas_base_stop_watchdog - stop the fault_reset_work_q
+ * @ioc: pointer to scsi command object
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc)
+{
+	unsigned long	 flags;
+	struct workqueue_struct *wq;
+
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	wq = ioc->fault_reset_work_q;
+	ioc->fault_reset_work_q = NULL;
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+	if (wq) {
+		if (!cancel_delayed_work(&ioc->fault_reset_work))
+			flush_workqueue(wq);
+		destroy_workqueue(wq);
+	}
+}
+
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 /**
  * _base_sas_ioc_info - verbose translation of the ioc status
@@ -440,6 +498,10 @@ _base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info)
 	if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
 		return;
 
+	/* each nexus loss loginfo */
+	if (log_info == 0x31170000)
+		return;
+
 	/* eat the loginfos associated with task aborts */
 	if (ioc->ignore_loginfos && (log_info == 30050000 || log_info ==
 	    0x31140000 || log_info == 0x31130000))
@@ -1109,7 +1171,6 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
 		}
 	}
 
-	pci_set_drvdata(pdev, ioc->shost);
 	_base_mask_interrupts(ioc);
 	r = _base_enable_msix(ioc);
 	if (r)
@@ -1132,7 +1193,6 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
 	ioc->pci_irq = -1;
 	pci_release_selected_regions(ioc->pdev, ioc->bars);
 	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
 	return r;
 }
 
@@ -3191,7 +3251,6 @@ mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc)
 	ioc->chip_phys = 0;
 	pci_release_selected_regions(ioc->pdev, ioc->bars);
 	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
 	return;
 }
 
@@ -3205,7 +3264,6 @@ int
 mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 {
 	int r, i;
-	unsigned long	 flags;
 
 	dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
 	    __func__));
@@ -3214,6 +3272,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	if (r)
 		return r;
 
+	pci_set_drvdata(ioc->pdev, ioc->shost);
 	r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
 	if (r)
 		goto out_free_resources;
@@ -3288,23 +3347,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	if (r)
 		goto out_free_resources;
 
-	/* initialize fault polling */
-	INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
-	snprintf(ioc->fault_reset_work_q_name,
-	    sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
-	ioc->fault_reset_work_q =
-		create_singlethread_workqueue(ioc->fault_reset_work_q_name);
-	if (!ioc->fault_reset_work_q) {
-		printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
-		    ioc->name, __func__, __LINE__);
-			goto out_free_resources;
-	}
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-	if (ioc->fault_reset_work_q)
-		queue_delayed_work(ioc->fault_reset_work_q,
-		    &ioc->fault_reset_work,
-		    msecs_to_jiffies(FAULT_POLLING_INTERVAL));
-	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+	mpt2sas_base_start_watchdog(ioc);
 	return 0;
 
  out_free_resources:
@@ -3312,6 +3355,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	ioc->remove_host = 1;
 	mpt2sas_base_free_resources(ioc);
 	_base_release_memory_pools(ioc);
+	pci_set_drvdata(ioc->pdev, NULL);
 	kfree(ioc->tm_cmds.reply);
 	kfree(ioc->transport_cmds.reply);
 	kfree(ioc->config_cmds.reply);
@@ -3337,22 +3381,14 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 void
 mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
 {
-	unsigned long	 flags;
-	struct workqueue_struct *wq;
 
 	dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
 	    __func__));
 
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-	wq = ioc->fault_reset_work_q;
-	ioc->fault_reset_work_q = NULL;
-	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
-	if (!cancel_delayed_work(&ioc->fault_reset_work))
-		flush_workqueue(wq);
-	destroy_workqueue(wq);
-
+	mpt2sas_base_stop_watchdog(ioc);
 	mpt2sas_base_free_resources(ioc);
 	_base_release_memory_pools(ioc);
+	pci_set_drvdata(ioc->pdev, NULL);
 	kfree(ioc->pfacts);
 	kfree(ioc->ctl_cmds.reply);
 	kfree(ioc->base_cmds.reply);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 286c185fa9e..acdcff150a3 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -69,10 +69,10 @@
 #define MPT2SAS_DRIVER_NAME		"mpt2sas"
 #define MPT2SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
 #define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION		"01.100.03.00"
+#define MPT2SAS_DRIVER_VERSION		"01.100.04.00"
 #define MPT2SAS_MAJOR_VERSION		01
 #define MPT2SAS_MINOR_VERSION		100
-#define MPT2SAS_BUILD_VERSION		03
+#define MPT2SAS_BUILD_VERSION		04
 #define MPT2SAS_RELEASE_VERSION		00
 
 /*
@@ -673,6 +673,8 @@ typedef void (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID,
 
 /* base shared API */
 extern struct list_head mpt2sas_ioc_list;
+void mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc);
+void mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc);
 
 int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc);
 void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 58cfb97846f..6ddee161beb 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -236,17 +236,25 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	Mpi2ConfigRequest_t *config_request;
 	int r;
 	u8 retry_count;
-	u8 issue_reset;
+	u8 issue_host_reset = 0;
 	u16 wait_state_count;
 
+	mutex_lock(&ioc->config_cmds.mutex);
 	if (ioc->config_cmds.status != MPT2_CMD_NOT_USED) {
 		printk(MPT2SAS_ERR_FMT "%s: config_cmd in use\n",
 		    ioc->name, __func__);
+		mutex_unlock(&ioc->config_cmds.mutex);
 		return -EAGAIN;
 	}
 	retry_count = 0;
 
  retry_config:
+	if (retry_count) {
+		if (retry_count > 2) /* attempt only 2 retries */
+			return -EFAULT;
+		printk(MPT2SAS_INFO_FMT "%s: attempting retry (%d)\n",
+		    ioc->name, __func__, retry_count);
+	}
 	wait_state_count = 0;
 	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
 	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
@@ -254,8 +262,8 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 			printk(MPT2SAS_ERR_FMT
 			    "%s: failed due to ioc not operational\n",
 			    ioc->name, __func__);
-			ioc->config_cmds.status = MPT2_CMD_NOT_USED;
-			return -EFAULT;
+			r = -EFAULT;
+			goto out;
 		}
 		ssleep(1);
 		ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
@@ -271,8 +279,8 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	if (!smid) {
 		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
 		    ioc->name, __func__);
-		ioc->config_cmds.status = MPT2_CMD_NOT_USED;
-		return -EAGAIN;
+		r = -EAGAIN;
+		goto out;
 	}
 
 	r = 0;
@@ -292,9 +300,15 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 		    ioc->name, __func__);
 		_debug_dump_mf(mpi_request,
 		    sizeof(Mpi2ConfigRequest_t)/4);
-		if (!(ioc->config_cmds.status & MPT2_CMD_RESET))
-			issue_reset = 1;
-		goto issue_host_reset;
+		retry_count++;
+		if (ioc->config_cmds.smid == smid)
+			mpt2sas_base_free_smid(ioc, smid);
+		if ((ioc->shost_recovery) ||
+		    (ioc->config_cmds.status & MPT2_CMD_RESET))
+			goto retry_config;
+		issue_host_reset = 1;
+		r = -EFAULT;
+		goto out;
 	}
 	if (ioc->config_cmds.status & MPT2_CMD_REPLY_VALID)
 		memcpy(mpi_reply, ioc->config_cmds.reply,
@@ -302,21 +316,13 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	if (retry_count)
 		printk(MPT2SAS_INFO_FMT "%s: retry completed!!\n",
 		    ioc->name, __func__);
+out:
 	ioc->config_cmds.status = MPT2_CMD_NOT_USED;
-	return r;
-
- issue_host_reset:
-	if (issue_reset)
+	mutex_unlock(&ioc->config_cmds.mutex);
+	if (issue_host_reset)
 		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 		    FORCE_BIG_HAMMER);
-	ioc->config_cmds.status = MPT2_CMD_NOT_USED;
-	if (!retry_count) {
-		printk(MPT2SAS_INFO_FMT "%s: attempting retry\n",
-		    ioc->name, __func__);
-		retry_count++;
-		goto retry_config;
-	}
-	return -EFAULT;
+	return r;
 }
 
 /**
@@ -375,7 +381,6 @@ mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2ManufacturingPage0_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -417,7 +422,6 @@ mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -438,7 +442,6 @@ mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2BiosPage2_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -480,7 +483,6 @@ mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -501,7 +503,6 @@ mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2BiosPage3_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -543,7 +544,6 @@ mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -564,7 +564,6 @@ mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2IOUnitPage0_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -606,7 +605,6 @@ mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -627,7 +625,6 @@ mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2IOUnitPage1_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -669,7 +666,6 @@ mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -690,7 +686,6 @@ mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
 	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
@@ -732,7 +727,6 @@ mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -753,7 +747,6 @@ mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2IOCPage8_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -795,7 +788,6 @@ mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -818,7 +810,6 @@ mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2SasDevicePage0_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -863,7 +854,6 @@ mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -886,7 +876,6 @@ mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2SasDevicePage1_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -931,7 +920,6 @@ mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -953,7 +941,6 @@ mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys)
 	Mpi2ConfigReply_t mpi_reply;
 	Mpi2SasIOUnitPage0_t config_page;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
 	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
@@ -1002,7 +989,6 @@ mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys)
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1026,8 +1012,6 @@ mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	Mpi2ConfigRequest_t mpi_request;
 	int r;
 	struct config_request mem;
-
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sz);
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1070,7 +1054,6 @@ mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1095,7 +1078,6 @@ mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sz);
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1138,7 +1120,6 @@ mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1161,7 +1142,6 @@ mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2ExpanderPage0_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1206,7 +1186,6 @@ mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1230,7 +1209,6 @@ mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2ExpanderPage1_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1277,7 +1255,6 @@ mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1300,7 +1277,6 @@ mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2SasEnclosurePage0_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1345,7 +1321,6 @@ mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1367,7 +1342,6 @@ mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2SasPhyPage0_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1413,7 +1387,6 @@ mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1435,7 +1408,6 @@ mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2SasPhyPage1_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1481,7 +1453,6 @@ mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1505,7 +1476,6 @@ mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2RaidVolPage1_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1548,7 +1518,6 @@ mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1572,7 +1541,6 @@ mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle,
 	struct config_request mem;
 	u16 ioc_status;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	*num_pds = 0;
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1620,7 +1588,6 @@ mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1645,7 +1612,6 @@ mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	memset(config_page, 0, sz);
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1687,7 +1653,6 @@ mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1711,7 +1676,6 @@ mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	memset(config_page, 0, sizeof(Mpi2RaidPhysDiskPage0_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1754,7 +1718,6 @@ mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1778,7 +1741,6 @@ mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
 	struct config_request mem;
 	u16 ioc_status;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	*volume_handle = 0;
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1842,7 +1804,6 @@ mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 2a01a5f2a84..2e9a4445596 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2767,6 +2767,10 @@ _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
 	char *desc_ioc_state = NULL;
 	char *desc_scsi_status = NULL;
 	char *desc_scsi_state = ioc->tmp_string;
+	u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
+
+	if (log_info == 0x31170000)
+		return;
 
 	switch (ioc_status) {
 	case MPI2_IOCSTATUS_SUCCESS:
@@ -3426,7 +3430,7 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 	__le64 sas_address;
 	int i;
 	unsigned long flags;
-	struct _sas_port *mpt2sas_port;
+	struct _sas_port *mpt2sas_port = NULL;
 	int rc = 0;
 
 	if (!handle)
@@ -3518,12 +3522,20 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 		    &expander_pg1, i, handle))) {
 			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
 			    ioc->name, __FILE__, __LINE__, __func__);
-			continue;
+			rc = -1;
+			goto out_fail;
 		}
 		sas_expander->phy[i].handle = handle;
 		sas_expander->phy[i].phy_id = i;
-		mpt2sas_transport_add_expander_phy(ioc, &sas_expander->phy[i],
-		    expander_pg1, sas_expander->parent_dev);
+
+		if ((mpt2sas_transport_add_expander_phy(ioc,
+		    &sas_expander->phy[i], expander_pg1,
+		    sas_expander->parent_dev))) {
+			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			rc = -1;
+			goto out_fail;
+		}
 	}
 
 	if (sas_expander->enclosure_handle) {
@@ -3540,8 +3552,9 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 
  out_fail:
 
-	if (sas_expander)
-		kfree(sas_expander->phy);
+	if (mpt2sas_port)
+		mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
+		    sas_expander->parent_handle);
 	kfree(sas_expander);
 	return rc;
 }
@@ -3663,12 +3676,11 @@ _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd)
 	sas_device->hidden_raid_component = is_pd;
 
 	/* get enclosure_logical_id */
-	if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, &enclosure_pg0,
-	   MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
-	   sas_device->enclosure_handle))) {
+	if (sas_device->enclosure_handle && !(mpt2sas_config_get_enclosure_pg0(
+	   ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+	   sas_device->enclosure_handle)))
 		sas_device->enclosure_logical_id =
 		    le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
-	}
 
 	/* get device name */
 	sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
@@ -4250,12 +4262,6 @@ _scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc,
 	u16 handle = le16_to_cpu(element->VolDevHandle);
 	int rc;
 
-#if 0 /* RAID_HACKS */
-	if (le32_to_cpu(event_data->Flags) &
-	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
-		return;
-#endif
-
 	mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
 	if (!wwid) {
 		printk(MPT2SAS_ERR_FMT
@@ -4310,12 +4316,6 @@ _scsih_sas_volume_delete(struct MPT2SAS_ADAPTER *ioc,
 	unsigned long flags;
 	struct MPT2SAS_TARGET *sas_target_priv_data;
 
-#if 0 /* RAID_HACKS */
-	if (le32_to_cpu(event_data->Flags) &
-	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
-		return;
-#endif
-
 	spin_lock_irqsave(&ioc->raid_device_lock, flags);
 	raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
 	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
@@ -4428,14 +4428,38 @@ _scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc,
 	struct _sas_device *sas_device;
 	unsigned long flags;
 	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	u32 ioc_status;
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
 	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	if (sas_device)
+	if (sas_device) {
 		sas_device->hidden_raid_component = 1;
-	else
-		_scsih_add_device(ioc, handle, 0, 1);
+		return;
+	}
+
+	if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	_scsih_link_change(ioc,
+	    le16_to_cpu(sas_device_pg0.ParentDevHandle),
+	    handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+
+	_scsih_add_device(ioc, handle, 0, 1);
 }
 
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
@@ -4535,12 +4559,15 @@ _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 {
 	Mpi2EventIrConfigElement_t *element;
 	int i;
+	u8 foreign_config;
 
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
 		_scsih_sas_ir_config_change_event_debug(ioc, event_data);
 
 #endif
+	foreign_config = (le32_to_cpu(event_data->Flags) &
+	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
 
 	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
 	for (i = 0; i < event_data->NumElements; i++, element++) {
@@ -4548,11 +4575,13 @@ _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 		switch (element->ReasonCode) {
 		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
 		case MPI2_EVENT_IR_CHANGE_RC_ADDED:
-			_scsih_sas_volume_add(ioc, element);
+			if (!foreign_config)
+				_scsih_sas_volume_add(ioc, element);
 			break;
 		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
 		case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
-			_scsih_sas_volume_delete(ioc, element);
+			if (!foreign_config)
+				_scsih_sas_volume_delete(ioc, element);
 			break;
 		case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
 			_scsih_sas_pd_hide(ioc, element);
@@ -4671,6 +4700,9 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 	u32 state;
 	struct _sas_device *sas_device;
 	unsigned long flags;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	u32 ioc_status;
 
 	if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
 		return;
@@ -4687,22 +4719,40 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
 	switch (state) {
-#if 0
-	case MPI2_RAID_PD_STATE_OFFLINE:
-		if (sas_device)
-			_scsih_remove_device(ioc, handle);
-		break;
-#endif
 	case MPI2_RAID_PD_STATE_ONLINE:
 	case MPI2_RAID_PD_STATE_DEGRADED:
 	case MPI2_RAID_PD_STATE_REBUILDING:
 	case MPI2_RAID_PD_STATE_OPTIMAL:
-		if (sas_device)
+		if (sas_device) {
 			sas_device->hidden_raid_component = 1;
-		else
-			_scsih_add_device(ioc, handle, 0, 1);
+			return;
+		}
+
+		if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+		    handle))) {
+			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			return;
+		}
+
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			return;
+		}
+
+		_scsih_link_change(ioc,
+		    le16_to_cpu(sas_device_pg0.ParentDevHandle),
+		    handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+
+		_scsih_add_device(ioc, handle, 0, 1);
+
 		break;
 
+	case MPI2_RAID_PD_STATE_OFFLINE:
 	case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
 	case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
 	case MPI2_RAID_PD_STATE_HOT_SPARE:
@@ -5774,6 +5824,7 @@ _scsih_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 	u32 device_state;
 
+	mpt2sas_base_stop_watchdog(ioc);
 	flush_scheduled_work();
 	scsi_block_requests(shost);
 	device_state = pci_choose_state(pdev, state);
@@ -5816,6 +5867,7 @@ _scsih_resume(struct pci_dev *pdev)
 
 	mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET);
 	scsi_unblock_requests(shost);
+	mpt2sas_base_start_watchdog(ioc);
 	return 0;
 }
 #endif /* CONFIG_PM */
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 650bcef08f2..cd78c501803 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -9,7 +9,6 @@
 
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
-#include <linux/smp_lock.h>
 #include <linux/list.h>
 
 #include <scsi/scsi_tcq.h>
diff --git a/drivers/scsi/qla4xxx/ql4_dbg.c b/drivers/scsi/qla4xxx/ql4_dbg.c
index fcc184cd066..cbceb0ebabf 100644
--- a/drivers/scsi/qla4xxx/ql4_dbg.c
+++ b/drivers/scsi/qla4xxx/ql4_dbg.c
@@ -15,19 +15,18 @@ void qla4xxx_dump_buffer(void *b, uint32_t size)
 	uint32_t cnt;
 	uint8_t *c = b;
 
-	printk(" 0   1	 2   3	 4   5	 6   7	 8   9	Ah  Bh	Ch  Dh	Eh  "
+	printk(" 0   1   2   3   4   5   6   7   8   9  Ah  Bh  Ch  Dh  Eh  "
 	       "Fh\n");
 	printk("------------------------------------------------------------"
 	       "--\n");
-	for (cnt = 0; cnt < size; cnt++, c++) {
-		printk(KERN_DEBUG "%02x", *c);
-		if (!(cnt % 16))
-			printk(KERN_DEBUG "\n");
+	for (cnt = 0; cnt < size; c++) {
+		printk(KERN_INFO "%02x", *c);
+		if (!(++cnt % 16))
+			printk(KERN_INFO "\n");
 
 		else
-			printk(KERN_DEBUG "  ");
+			printk(KERN_INFO "  ");
 	}
-	if (cnt % 16)
-		printk(KERN_DEBUG "\n");
+	printk(KERN_INFO "\n");
 }
 
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index b586f27c3bd..81b5f29254e 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -100,7 +100,6 @@
 #define MAX_SRBS		MAX_CMDS_TO_RISC
 #define MBOX_AEN_REG_COUNT	5
 #define MAX_INIT_RETRIES	5
-#define IOCB_HIWAT_CUSHION	16
 
 /*
  * Buffer sizes
@@ -184,6 +183,11 @@ struct srb {
 	uint16_t cc_stat;
 	u_long r_start;		/* Time we recieve a cmd from OS */
 	u_long u_start;		/* Time when we handed the cmd to F/W */
+
+	/* Used for extended sense / status continuation */
+	uint8_t *req_sense_ptr;
+	uint16_t req_sense_len;
+	uint16_t reserved2;
 };
 
 /*
@@ -302,7 +306,6 @@ struct scsi_qla_host {
 	uint32_t tot_ddbs;
 
 	uint16_t	iocb_cnt;
-	uint16_t	iocb_hiwat;
 
 	/* SRB cache. */
 #define SRB_MIN_REQ	128
@@ -436,6 +439,8 @@ struct scsi_qla_host {
 	/* Map ddb_list entry by FW ddb index */
 	struct ddb_entry *fw_ddb_index_map[MAX_DDB_ENTRIES];
 
+	/* Saved srb for status continuation entry processing */
+	struct srb *status_srb;
 };
 
 static inline int is_qla4010(struct scsi_qla_host *ha)
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index 1b667a70cff..9cd7a608df3 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -572,6 +572,7 @@ struct conn_event_log_entry {
  *************************************************************************/
 #define IOCB_MAX_CDB_LEN	    16	/* Bytes in a CBD */
 #define IOCB_MAX_SENSEDATA_LEN	    32	/* Bytes of sense data */
+#define IOCB_MAX_EXT_SENSEDATA_LEN  60  /* Bytes of extended sense data */
 
 /* IOCB header structure */
 struct qla4_header {
@@ -733,6 +734,12 @@ struct status_entry {
 
 };
 
+/* Status Continuation entry */
+struct status_cont_entry {
+       struct qla4_header hdr; /* 00-03 */
+       uint8_t ext_sense_data[IOCB_MAX_EXT_SENSEDATA_LEN]; /* 04-63 */
+};
+
 struct passthru0 {
 	struct qla4_header hdr;		       /* 00-03 */
 	uint32_t handle;	/* 04-07 */
diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c
index 912a67494ad..e0c32159749 100644
--- a/drivers/scsi/qla4xxx/ql4_iocb.c
+++ b/drivers/scsi/qla4xxx/ql4_iocb.c
@@ -10,9 +10,42 @@
 #include "ql4_dbg.h"
 #include "ql4_inline.h"
 
-
 #include <scsi/scsi_tcq.h>
 
+static int
+qla4xxx_space_in_req_ring(struct scsi_qla_host *ha, uint16_t req_cnt)
+{
+	uint16_t cnt;
+
+	/* Calculate number of free request entries. */
+	if ((req_cnt + 2) >= ha->req_q_count) {
+		cnt = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out);
+		if (ha->request_in < cnt)
+			ha->req_q_count = cnt - ha->request_in;
+		else
+			ha->req_q_count = REQUEST_QUEUE_DEPTH -
+						(ha->request_in - cnt);
+	}
+
+	/* Check if room for request in request ring. */
+	if ((req_cnt + 2) < ha->req_q_count)
+		return 1;
+	else
+		return 0;
+}
+
+static void qla4xxx_advance_req_ring_ptr(struct scsi_qla_host *ha)
+{
+	/* Advance request queue pointer */
+	if (ha->request_in == (REQUEST_QUEUE_DEPTH - 1)) {
+		ha->request_in = 0;
+		ha->request_ptr = ha->request_ring;
+	} else {
+		ha->request_in++;
+		ha->request_ptr++;
+	}
+}
+
 /**
  * qla4xxx_get_req_pkt - returns a valid entry in request queue.
  * @ha: Pointer to host adapter structure.
@@ -26,35 +59,18 @@
 static int qla4xxx_get_req_pkt(struct scsi_qla_host *ha,
 			       struct queue_entry **queue_entry)
 {
-	uint16_t request_in;
-	uint8_t status = QLA_SUCCESS;
-
-	*queue_entry = ha->request_ptr;
+	uint16_t req_cnt = 1;
 
-	/* get the latest request_in and request_out index */
-	request_in = ha->request_in;
-	ha->request_out = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out);
-
-	/* Advance request queue pointer and check for queue full */
-	if (request_in == (REQUEST_QUEUE_DEPTH - 1)) {
-		request_in = 0;
-		ha->request_ptr = ha->request_ring;
-	} else {
-		request_in++;
-		ha->request_ptr++;
-	}
-
-	/* request queue is full, try again later */
-	if ((ha->iocb_cnt + 1) >= ha->iocb_hiwat) {
-		/* restore request pointer */
-		ha->request_ptr = *queue_entry;
-		status = QLA_ERROR;
-	} else {
-		ha->request_in = request_in;
+	if (qla4xxx_space_in_req_ring(ha, req_cnt)) {
+		*queue_entry = ha->request_ptr;
 		memset(*queue_entry, 0, sizeof(**queue_entry));
+
+		qla4xxx_advance_req_ring_ptr(ha);
+		ha->req_q_count -= req_cnt;
+		return QLA_SUCCESS;
 	}
 
-	return status;
+	return QLA_ERROR;
 }
 
 /**
@@ -100,21 +116,14 @@ exit_send_marker:
 	return status;
 }
 
-static struct continuation_t1_entry* qla4xxx_alloc_cont_entry(
-	struct scsi_qla_host *ha)
+static struct continuation_t1_entry *
+qla4xxx_alloc_cont_entry(struct scsi_qla_host *ha)
 {
 	struct continuation_t1_entry *cont_entry;
 
 	cont_entry = (struct continuation_t1_entry *)ha->request_ptr;
 
-	/* Advance request queue pointer */
-	if (ha->request_in == (REQUEST_QUEUE_DEPTH - 1)) {
-		ha->request_in = 0;
-		ha->request_ptr = ha->request_ring;
-	} else {
-		ha->request_in++;
-		ha->request_ptr++;
-	}
+	qla4xxx_advance_req_ring_ptr(ha);
 
 	/* Load packet defaults */
 	cont_entry->hdr.entryType = ET_CONTINUE;
@@ -197,13 +206,10 @@ int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb)
 	struct scsi_cmnd *cmd = srb->cmd;
 	struct ddb_entry *ddb_entry;
 	struct command_t3_entry *cmd_entry;
-
 	int nseg;
 	uint16_t tot_dsds;
 	uint16_t req_cnt;
-
 	unsigned long flags;
-	uint16_t cnt;
 	uint32_t index;
 	char tag[2];
 
@@ -217,6 +223,19 @@ int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb)
 
 	index = (uint32_t)cmd->request->tag;
 
+	/*
+	 * Check to see if adapter is online before placing request on
+	 * request queue.  If a reset occurs and a request is in the queue,
+	 * the firmware will still attempt to process the request, retrieving
+	 * garbage for pointers.
+	 */
+	if (!test_bit(AF_ONLINE, &ha->flags)) {
+		DEBUG2(printk("scsi%ld: %s: Adapter OFFLINE! "
+			      "Do not issue command.\n",
+			      ha->host_no, __func__));
+		goto queuing_error;
+	}
+
 	/* Calculate the number of request entries needed. */
 	nseg = scsi_dma_map(cmd);
 	if (nseg < 0)
@@ -224,17 +243,7 @@ int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb)
 	tot_dsds = nseg;
 
 	req_cnt = qla4xxx_calc_request_entries(tot_dsds);
-
-	if (ha->req_q_count < (req_cnt + 2)) {
-		cnt = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out);
-		if (ha->request_in < cnt)
-			ha->req_q_count = cnt - ha->request_in;
-		else
-			ha->req_q_count = REQUEST_QUEUE_DEPTH -
-				(ha->request_in - cnt);
-	}
-
-	if (ha->req_q_count < (req_cnt + 2))
+	if (!qla4xxx_space_in_req_ring(ha, req_cnt))
 		goto queuing_error;
 
 	/* total iocbs active */
@@ -286,32 +295,10 @@ int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb)
 			break;
 		}
 
-
-	/* Advance request queue pointer */
-	ha->request_in++;
-	if (ha->request_in == REQUEST_QUEUE_DEPTH) {
-		ha->request_in = 0;
-		ha->request_ptr = ha->request_ring;
-	} else
-		ha->request_ptr++;
-
-
+	qla4xxx_advance_req_ring_ptr(ha);
 	qla4xxx_build_scsi_iocbs(srb, cmd_entry, tot_dsds);
 	wmb();
 
-	/*
-	 * Check to see if adapter is online before placing request on
-	 * request queue.  If a reset occurs and a request is in the queue,
-	 * the firmware will still attempt to process the request, retrieving
-	 * garbage for pointers.
-	 */
-	if (!test_bit(AF_ONLINE, &ha->flags)) {
-		DEBUG2(printk("scsi%ld: %s: Adapter OFFLINE! "
-			      "Do not issue command.\n",
-			      ha->host_no, __func__));
-		goto queuing_error;
-	}
-
 	srb->cmd->host_scribble = (unsigned char *)srb;
 
 	/* update counters */
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index 799120fcb9b..8025ee16588 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -11,6 +11,98 @@
 #include "ql4_inline.h"
 
 /**
+ * qla4xxx_copy_sense - copy sense data	into cmd sense buffer
+ * @ha: Pointer to host adapter structure.
+ * @sts_entry: Pointer to status entry structure.
+ * @srb: Pointer to srb structure.
+ **/
+static void qla4xxx_copy_sense(struct scsi_qla_host *ha,
+                               struct status_entry *sts_entry,
+                               struct srb *srb)
+{
+	struct scsi_cmnd *cmd = srb->cmd;
+	uint16_t sense_len;
+
+	memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
+	sense_len = le16_to_cpu(sts_entry->senseDataByteCnt);
+	if (sense_len == 0)
+		return;
+
+	/* Save total available sense length,
+	 * not to exceed cmd's sense buffer size */
+	sense_len = min_t(uint16_t, sense_len, SCSI_SENSE_BUFFERSIZE);
+	srb->req_sense_ptr = cmd->sense_buffer;
+	srb->req_sense_len = sense_len;
+
+	/* Copy sense from sts_entry pkt */
+	sense_len = min_t(uint16_t, sense_len, IOCB_MAX_SENSEDATA_LEN);
+	memcpy(cmd->sense_buffer, sts_entry->senseData, sense_len);
+
+	DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%d: %s: sense key = %x, "
+		"ASL= %02x, ASC/ASCQ = %02x/%02x\n", ha->host_no,
+		cmd->device->channel, cmd->device->id,
+		cmd->device->lun, __func__,
+		sts_entry->senseData[2] & 0x0f,
+		sts_entry->senseData[7],
+		sts_entry->senseData[12],
+		sts_entry->senseData[13]));
+
+	DEBUG5(qla4xxx_dump_buffer(cmd->sense_buffer, sense_len));
+	srb->flags |= SRB_GOT_SENSE;
+
+	/* Update srb, in case a sts_cont pkt follows */
+	srb->req_sense_ptr += sense_len;
+	srb->req_sense_len -= sense_len;
+	if (srb->req_sense_len != 0)
+		ha->status_srb = srb;
+	else
+		ha->status_srb = NULL;
+}
+
+/**
+ * qla4xxx_status_cont_entry - Process a Status Continuations entry.
+ * @ha: SCSI driver HA context
+ * @sts_cont: Entry pointer
+ *
+ * Extended sense data.
+ */
+static void
+qla4xxx_status_cont_entry(struct scsi_qla_host *ha,
+			  struct status_cont_entry *sts_cont)
+{
+	struct srb *srb = ha->status_srb;
+	struct scsi_cmnd *cmd;
+	uint8_t sense_len;
+
+	if (srb == NULL)
+		return;
+
+	cmd = srb->cmd;
+	if (cmd == NULL) {
+		DEBUG2(printk(KERN_INFO "scsi%ld: %s: Cmd already returned "
+			"back to OS srb=%p srb->state:%d\n", ha->host_no,
+			__func__, srb, srb->state));
+		ha->status_srb = NULL;
+		return;
+	}
+
+	/* Copy sense data. */
+	sense_len = min_t(uint16_t, srb->req_sense_len,
+			  IOCB_MAX_EXT_SENSEDATA_LEN);
+	memcpy(srb->req_sense_ptr, sts_cont->ext_sense_data, sense_len);
+	DEBUG5(qla4xxx_dump_buffer(srb->req_sense_ptr, sense_len));
+
+	srb->req_sense_ptr += sense_len;
+	srb->req_sense_len -= sense_len;
+
+	/* Place command on done queue. */
+	if (srb->req_sense_len == 0) {
+		qla4xxx_srb_compl(ha, srb);
+		ha->status_srb = NULL;
+	}
+}
+
+/**
  * qla4xxx_status_entry - processes status IOCBs
  * @ha: Pointer to host adapter structure.
  * @sts_entry: Pointer to status entry structure.
@@ -23,7 +115,6 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha,
 	struct srb *srb;
 	struct ddb_entry *ddb_entry;
 	uint32_t residual;
-	uint16_t sensebytecnt;
 
 	srb = qla4xxx_del_from_active_array(ha, le32_to_cpu(sts_entry->handle));
 	if (!srb) {
@@ -92,24 +183,7 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha,
 			break;
 
 		/* Copy Sense Data into sense buffer. */
-		memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
-
-		sensebytecnt = le16_to_cpu(sts_entry->senseDataByteCnt);
-		if (sensebytecnt == 0)
-			break;
-
-		memcpy(cmd->sense_buffer, sts_entry->senseData,
-		       min_t(uint16_t, sensebytecnt, SCSI_SENSE_BUFFERSIZE));
-
-		DEBUG2(printk("scsi%ld:%d:%d:%d: %s: sense key = %x, "
-			      "ASC/ASCQ = %02x/%02x\n", ha->host_no,
-			      cmd->device->channel, cmd->device->id,
-			      cmd->device->lun, __func__,
-			      sts_entry->senseData[2] & 0x0f,
-			      sts_entry->senseData[12],
-			      sts_entry->senseData[13]));
-
-		srb->flags |= SRB_GOT_SENSE;
+		qla4xxx_copy_sense(ha, sts_entry, srb);
 		break;
 
 	case SCS_INCOMPLETE:
@@ -176,23 +250,7 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha,
 				break;
 
 			/* Copy Sense Data into sense buffer. */
-			memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
-
-			sensebytecnt =
-				le16_to_cpu(sts_entry->senseDataByteCnt);
-			if (sensebytecnt == 0)
-				break;
-
-			memcpy(cmd->sense_buffer, sts_entry->senseData,
-			       min_t(uint16_t, sensebytecnt, SCSI_SENSE_BUFFERSIZE));
-
-			DEBUG2(printk("scsi%ld:%d:%d:%d: %s: sense key = %x, "
-				      "ASC/ASCQ = %02x/%02x\n", ha->host_no,
-				      cmd->device->channel, cmd->device->id,
-				      cmd->device->lun, __func__,
-				      sts_entry->senseData[2] & 0x0f,
-				      sts_entry->senseData[12],
-				      sts_entry->senseData[13]));
+			qla4xxx_copy_sense(ha, sts_entry, srb);
 		} else {
 			/*
 			 * If RISC reports underrun and target does not
@@ -268,9 +326,10 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha,
 
 status_entry_exit:
 
-	/* complete the request */
+	/* complete the request, if not waiting for status_continuation pkt */
 	srb->cc_stat = sts_entry->completionStatus;
-	qla4xxx_srb_compl(ha, srb);
+	if (ha->status_srb == NULL)
+		qla4xxx_srb_compl(ha, srb);
 }
 
 /**
@@ -305,10 +364,7 @@ static void qla4xxx_process_response_queue(struct scsi_qla_host * ha)
 		/* process entry */
 		switch (sts_entry->hdr.entryType) {
 		case ET_STATUS:
-			/*
-			 * Common status - Single completion posted in single
-			 * IOSB.
-			 */
+			/* Common status */
 			qla4xxx_status_entry(ha, sts_entry);
 			break;
 
@@ -316,9 +372,8 @@ static void qla4xxx_process_response_queue(struct scsi_qla_host * ha)
 			break;
 
 		case ET_STATUS_CONTINUATION:
-			/* Just throw away the status continuation entries */
-			DEBUG2(printk("scsi%ld: %s: Status Continuation entry "
-				      "- ignoring\n", ha->host_no, __func__));
+			qla4xxx_status_cont_entry(ha,
+				(struct status_cont_entry *) sts_entry);
 			break;
 
 		case ET_COMMAND:
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 051b0f5e8c8..09d6d4b76f3 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -385,16 +385,6 @@ int qla4xxx_get_firmware_status(struct scsi_qla_host * ha)
 			      mbox_sts[0]));
 		return QLA_ERROR;
 	}
-
-	/* High-water mark of IOCBs */
-	ha->iocb_hiwat = mbox_sts[2];
-	if (ha->iocb_hiwat > IOCB_HIWAT_CUSHION)
-		ha->iocb_hiwat -= IOCB_HIWAT_CUSHION;
-	else
-		dev_info(&ha->pdev->dev, "WARNING!!!  You have less than %d "
-			   "firmware IOCBs available (%d).\n",
-			   IOCB_HIWAT_CUSHION, ha->iocb_hiwat);
-
 	return QLA_SUCCESS;
 }
 
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index ec9da6ce848..40e3cafb3a9 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -66,6 +66,7 @@ static int qla4xxx_sess_get_param(struct iscsi_cls_session *sess,
 static int qla4xxx_host_get_param(struct Scsi_Host *shost,
 				  enum iscsi_host_param param, char *buf);
 static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session);
+static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc);
 
 /*
  * SCSI host template entry points
@@ -89,6 +90,7 @@ static struct scsi_host_template qla4xxx_driver_template = {
 	.eh_device_reset_handler = qla4xxx_eh_device_reset,
 	.eh_target_reset_handler = qla4xxx_eh_target_reset,
 	.eh_host_reset_handler	= qla4xxx_eh_host_reset,
+	.eh_timed_out		= qla4xxx_eh_cmd_timed_out,
 
 	.slave_configure	= qla4xxx_slave_configure,
 	.slave_alloc		= qla4xxx_slave_alloc,
@@ -124,6 +126,21 @@ static struct iscsi_transport qla4xxx_iscsi_transport = {
 
 static struct scsi_transport_template *qla4xxx_scsi_transport;
 
+static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc)
+{
+	struct iscsi_cls_session *session;
+	struct ddb_entry *ddb_entry;
+
+	session = starget_to_session(scsi_target(sc->device));
+	ddb_entry = session->dd_data;
+
+	/* if we are not logged in then the LLD is going to clean up the cmd */
+	if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE)
+		return BLK_EH_RESET_TIMER;
+	else
+		return BLK_EH_NOT_HANDLED;
+}
+
 static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session)
 {
 	struct ddb_entry *ddb_entry = session->dd_data;
@@ -904,18 +921,17 @@ static int qla4xxx_recover_adapter(struct scsi_qla_host *ha,
 	/* Flush any pending ddb changed AENs */
 	qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
 
+	qla4xxx_flush_active_srbs(ha);
+
 	/* Reset the firmware.	If successful, function
 	 * returns with ISP interrupts enabled.
 	 */
-	if (status == QLA_SUCCESS) {
-		DEBUG2(printk("scsi%ld: %s - Performing soft reset..\n",
-			      ha->host_no, __func__));
-		qla4xxx_flush_active_srbs(ha);
-		if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS)
-			status = qla4xxx_soft_reset(ha);
-		else
-			status = QLA_ERROR;
-	}
+	DEBUG2(printk("scsi%ld: %s - Performing soft reset..\n",
+		      ha->host_no, __func__));
+	if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS)
+		status = qla4xxx_soft_reset(ha);
+	else
+		status = QLA_ERROR;
 
 	/* Flush any pending ddb changed AENs */
 	qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
@@ -1527,11 +1543,9 @@ static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd)
 {
 	struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
 	struct ddb_entry *ddb_entry = cmd->device->hostdata;
-	struct srb *sp;
 	int ret = FAILED, stat;
 
-	sp = (struct srb *) cmd->SCp.ptr;
-	if (!sp || !ddb_entry)
+	if (!ddb_entry)
 		return ret;
 
 	dev_info(&ha->pdev->dev,
@@ -1644,7 +1658,7 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
 	ha = (struct scsi_qla_host *) cmd->device->host->hostdata;
 
 	dev_info(&ha->pdev->dev,
-		   "scsi(%ld:%d:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no,
+		   "scsi(%ld:%d:%d:%d): HOST RESET ISSUED.\n", ha->host_no,
 		   cmd->device->channel, cmd->device->id, cmd->device->lun);
 
 	if (qla4xxx_wait_for_hba_online(ha) != QLA_SUCCESS) {
diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h
index ab984cb89ce..6980cb279c8 100644
--- a/drivers/scsi/qla4xxx/ql4_version.h
+++ b/drivers/scsi/qla4xxx/ql4_version.h
@@ -5,5 +5,5 @@
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
 
-#define QLA4XXX_DRIVER_VERSION	"5.01.00-k8"
+#define QLA4XXX_DRIVER_VERSION	"5.01.00-k9"
 
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 2eee9e6e4fe..292c02f810d 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -3670,13 +3670,14 @@ static void
 fc_bsg_goose_queue(struct fc_rport *rport)
 {
 	int flagset;
+	unsigned long flags;
 
 	if (!rport->rqst_q)
 		return;
 
 	get_device(&rport->dev);
 
-	spin_lock(rport->rqst_q->queue_lock);
+	spin_lock_irqsave(rport->rqst_q->queue_lock, flags);
 	flagset = test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags) &&
 		  !test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags);
 	if (flagset)
@@ -3684,7 +3685,7 @@ fc_bsg_goose_queue(struct fc_rport *rport)
 	__blk_run_queue(rport->rqst_q);
 	if (flagset)
 		queue_flag_clear(QUEUE_FLAG_REENTER, rport->rqst_q);
-	spin_unlock(rport->rqst_q->queue_lock);
+	spin_unlock_irqrestore(rport->rqst_q->queue_lock, flags);
 
 	put_device(&rport->dev);
 }
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 783e33c65eb..b47240ca4b1 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -990,7 +990,7 @@ int iscsi_offload_mesg(struct Scsi_Host *shost,
 	struct iscsi_uevent *ev;
 	int len = NLMSG_SPACE(sizeof(*ev) + data_size);
 
-	skb = alloc_skb(len, GFP_NOIO);
+	skb = alloc_skb(len, GFP_ATOMIC);
 	if (!skb) {
 		printk(KERN_ERR "can not deliver iscsi offload message:OOM\n");
 		return -ENOMEM;
@@ -1012,7 +1012,7 @@ int iscsi_offload_mesg(struct Scsi_Host *shost,
 
 	memcpy((char *)ev + sizeof(*ev), data, data_size);
 
-	return iscsi_multicast_skb(skb, ISCSI_NL_GRP_UIP, GFP_NOIO);
+	return iscsi_multicast_skb(skb, ISCSI_NL_GRP_UIP, GFP_ATOMIC);
 }
 EXPORT_SYMBOL_GPL(iscsi_offload_mesg);
 
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 5616cd780ff..b7b9fec67a9 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1840,6 +1840,18 @@ static void sd_read_block_characteristics(struct scsi_disk *sdkp)
 	kfree(buffer);
 }
 
+static int sd_try_extended_inquiry(struct scsi_device *sdp)
+{
+	/*
+	 * Although VPD inquiries can go to SCSI-2 type devices,
+	 * some USB ones crash on receiving them, and the pages
+	 * we currently ask for are for SPC-3 and beyond
+	 */
+	if (sdp->scsi_level > SCSI_SPC_2)
+		return 1;
+	return 0;
+}
+
 /**
  *	sd_revalidate_disk - called the first time a new disk is seen,
  *	performs disk spin up, read_capacity, etc.
@@ -1877,8 +1889,12 @@ static int sd_revalidate_disk(struct gendisk *disk)
 	 */
 	if (sdkp->media_present) {
 		sd_read_capacity(sdkp, buffer);
-		sd_read_block_limits(sdkp);
-		sd_read_block_characteristics(sdkp);
+
+		if (sd_try_extended_inquiry(sdp)) {
+			sd_read_block_limits(sdkp);
+			sd_read_block_characteristics(sdkp);
+		}
+
 		sd_read_write_protect_flag(sdkp, buffer);
 		sd_read_cache_type(sdkp, buffer);
 		sd_read_app_tag_own(sdkp, buffer);
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 8201387b4da..9230402c45a 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -210,13 +210,11 @@ static void sg_put_dev(Sg_device *sdp);
 static int sg_allow_access(struct file *filp, unsigned char *cmd)
 {
 	struct sg_fd *sfp = (struct sg_fd *)filp->private_data;
-	struct request_queue *q = sfp->parentdp->device->request_queue;
 
 	if (sfp->parentdp->device->type == TYPE_SCANNER)
 		return 0;
 
-	return blk_verify_command(&q->cmd_filter,
-				  cmd, filp->f_mode & FMODE_WRITE);
+	return blk_verify_command(cmd, filp->f_mode & FMODE_WRITE);
 }
 
 static int
@@ -621,7 +619,7 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
 		if (strcmp(current->comm, cmd) && printk_ratelimit()) {
 			printk(KERN_WARNING
 			       "sg_write: data in/out %d/%d bytes for SCSI command 0x%x--"
-			       "guessing data in;\n" KERN_WARNING "   "
+			       "guessing data in;\n   "
 			       "program %s not setting count and/or reply_len properly\n",
 			       old_hdr.reply_len - (int)SZ_SG_HEADER,
 			       input_size, (unsigned int) cmnd[0],
@@ -1658,6 +1656,10 @@ static int sg_start_req(Sg_request *srp, unsigned char *cmd)
 		md->nr_entries = req_schp->k_use_sg;
 		md->offset = 0;
 		md->null_mapped = hp->dxferp ? 0 : 1;
+		if (dxfer_dir == SG_DXFER_TO_FROM_DEV)
+			md->from_user = 1;
+		else
+			md->from_user = 0;
 	}
 
 	if (iov_count) {
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index bcaba86060a..75da6e58ce5 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -2860,8 +2860,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
  */
 
     local_irq_restore(flags);
-    printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n"
-           KERN_INFO "        before abortion\n", HOSTNO); 
+    printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO); 
 
     return SCSI_ABORT_NOT_RUNNING;
 }
diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c
index 97f3158fa7b..27e84e4b1fa 100644
--- a/drivers/scsi/zalon.c
+++ b/drivers/scsi/zalon.c
@@ -134,7 +134,7 @@ zalon_probe(struct parisc_device *dev)
 
 	host = ncr_attach(&zalon7xx_template, unit, &device);
 	if (!host)
-		goto fail;
+		return -ENODEV;
 
 	if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) {
 	  dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching\n ",
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index a07015d646d..e7108e75653 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -60,11 +60,12 @@ struct serial_private {
 
 static void moan_device(const char *str, struct pci_dev *dev)
 {
-	printk(KERN_WARNING "%s: %s\n"
-	       KERN_WARNING "Please send the output of lspci -vv, this\n"
-	       KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
-	       KERN_WARNING "manufacturer and name of serial board or\n"
-	       KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n",
+	printk(KERN_WARNING
+	       "%s: %s\n"
+	       "Please send the output of lspci -vv, this\n"
+	       "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
+	       "manufacturer and name of serial board or\n"
+	       "modem board to rmk+serial@arm.linux.org.uk.\n",
 	       pci_name(dev), str, dev->vendor, dev->device,
 	       dev->subsystem_vendor, dev->subsystem_device);
 }
@@ -759,6 +760,8 @@ static int pci_netmos_init(struct pci_dev *dev)
 	/* subdevice 0x00PS means <P> parallel, <S> serial */
 	unsigned int num_serial = dev->subsystem_device & 0xf;
 
+	if (dev->device == PCI_DEVICE_ID_NETMOS_9901)
+		return 0;
 	if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
 			dev->subsystem_device == 0x0299)
 		return 0;
@@ -3557,6 +3560,10 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_VENDOR_ID_IBM, 0x0299,
 		0, 0, pbn_b0_bt_2_115200 },
 
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
 	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 037c1e0b7c4..6553833c12d 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -527,7 +527,7 @@ config SERIAL_S3C24A0
 
 config SERIAL_S3C6400
 	tristate "Samsung S3C6400/S3C6410 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410)
+	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410)
 	default y
 	help
 	  Serial port support for the Samsung S3C6400 and S3C6410
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 338b15c0a54..607d43a3104 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1551,6 +1551,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_add_port;
 
+#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
 	if (atmel_is_console_port(&port->uart)
 			&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
 		/*
@@ -1559,6 +1560,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
 		 */
 		clk_disable(port->clk);
 	}
+#endif
 
 	device_init_wakeup(&pdev->dev, 1);
 	platform_set_drvdata(pdev, port);
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 34b4ae0fe76..c108b1a0ce9 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -236,7 +236,6 @@ static int sport_startup(struct uart_port *port)
 	int retval;
 
 	pr_debug("%s enter\n", __func__);
-	memset(buffer, 20, '\0');
 	snprintf(buffer, 20, "%s rx", up->name);
 	retval = request_irq(up->rx_irq, sport_uart_rx_irq, IRQF_SAMPLE_RANDOM, buffer, up);
 	if (retval) {
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 141c0a3333a..a9802e76b5f 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -132,7 +132,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 	memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
 	    L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
 	if (is_con) {
-		mem_addr = alloc_bootmem(memsz);
+		mem_addr = kzalloc(memsz, GFP_NOWAIT);
 		dma_addr = virt_to_bus(mem_addr);
 	}
 	else
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
index 698048f64f5..f7c24baa141 100644
--- a/drivers/serial/msm_serial.c
+++ b/drivers/serial/msm_serial.c
@@ -730,7 +730,6 @@ static int __devexit msm_serial_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver msm_platform_driver = {
-	.probe = msm_serial_probe,
 	.remove = msm_serial_remove,
 	.driver = {
 		.name = "msm_serial",
diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c
index fb00ed5296e..fed1a9a1ffb 100644
--- a/drivers/serial/s3c2400.c
+++ b/drivers/serial/s3c2400.c
@@ -76,7 +76,7 @@ static int s3c2400_serial_probe(struct platform_device *dev)
 	return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
 }
 
-static struct platform_driver s3c2400_serial_drv = {
+static struct platform_driver s3c2400_serial_driver = {
 	.probe		= s3c2400_serial_probe,
 	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
@@ -85,16 +85,16 @@ static struct platform_driver s3c2400_serial_drv = {
 	},
 };
 
-s3c24xx_console_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
+s3c24xx_console_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
 
 static inline int s3c2400_serial_init(void)
 {
-	return s3c24xx_serial_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
+	return s3c24xx_serial_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
 }
 
 static inline void s3c2400_serial_exit(void)
 {
-	platform_driver_unregister(&s3c2400_serial_drv);
+	platform_driver_unregister(&s3c2400_serial_driver);
 }
 
 module_init(s3c2400_serial_init);
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index b5d7cbcba2a..c99f0821cae 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -88,7 +88,7 @@ static int s3c2410_serial_probe(struct platform_device *dev)
 	return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
 }
 
-static struct platform_driver s3c2410_serial_drv = {
+static struct platform_driver s3c2410_serial_driver = {
 	.probe		= s3c2410_serial_probe,
 	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
@@ -97,16 +97,16 @@ static struct platform_driver s3c2410_serial_drv = {
 	},
 };
 
-s3c24xx_console_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
+s3c24xx_console_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
 
 static int __init s3c2410_serial_init(void)
 {
-	return s3c24xx_serial_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
+	return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
 }
 
 static void __exit s3c2410_serial_exit(void)
 {
-	platform_driver_unregister(&s3c2410_serial_drv);
+	platform_driver_unregister(&s3c2410_serial_driver);
 }
 
 module_init(s3c2410_serial_init);
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index 11dcb90bdfe..6e057d8809d 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -121,7 +121,7 @@ static int s3c2412_serial_probe(struct platform_device *dev)
 	return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
 }
 
-static struct platform_driver s3c2412_serial_drv = {
+static struct platform_driver s3c2412_serial_driver = {
 	.probe		= s3c2412_serial_probe,
 	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
@@ -130,16 +130,16 @@ static struct platform_driver s3c2412_serial_drv = {
 	},
 };
 
-s3c24xx_console_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
+s3c24xx_console_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
 
 static inline int s3c2412_serial_init(void)
 {
-	return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
+	return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
 }
 
 static inline void s3c2412_serial_exit(void)
 {
-	platform_driver_unregister(&s3c2412_serial_drv);
+	platform_driver_unregister(&s3c2412_serial_driver);
 }
 
 module_init(s3c2412_serial_init);
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 06c5b0cc47a..69ff5d340f0 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -151,7 +151,7 @@ static int s3c2440_serial_probe(struct platform_device *dev)
 	return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
 }
 
-static struct platform_driver s3c2440_serial_drv = {
+static struct platform_driver s3c2440_serial_driver = {
 	.probe		= s3c2440_serial_probe,
 	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
@@ -160,16 +160,16 @@ static struct platform_driver s3c2440_serial_drv = {
 	},
 };
 
-s3c24xx_console_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
+s3c24xx_console_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
 
 static int __init s3c2440_serial_init(void)
 {
-	return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
+	return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
 }
 
 static void __exit s3c2440_serial_exit(void)
 {
-	platform_driver_unregister(&s3c2440_serial_drv);
+	platform_driver_unregister(&s3c2440_serial_driver);
 }
 
 module_init(s3c2440_serial_init);
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
index 786a067d62a..26c49e18bdd 100644
--- a/drivers/serial/s3c24a0.c
+++ b/drivers/serial/s3c24a0.c
@@ -92,7 +92,7 @@ static int s3c24a0_serial_probe(struct platform_device *dev)
 	return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf);
 }
 
-static struct platform_driver s3c24a0_serial_drv = {
+static struct platform_driver s3c24a0_serial_driver = {
 	.probe		= s3c24a0_serial_probe,
 	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
@@ -101,16 +101,16 @@ static struct platform_driver s3c24a0_serial_drv = {
 	},
 };
 
-s3c24xx_console_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+s3c24xx_console_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
 
 static int __init s3c24a0_serial_init(void)
 {
-	return s3c24xx_serial_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+	return s3c24xx_serial_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
 }
 
 static void __exit s3c24a0_serial_exit(void)
 {
-	platform_driver_unregister(&s3c24a0_serial_drv);
+	platform_driver_unregister(&s3c24a0_serial_driver);
 }
 
 module_init(s3c24a0_serial_init);
diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
index 48f1a3781f0..4be92ab5005 100644
--- a/drivers/serial/s3c6400.c
+++ b/drivers/serial/s3c6400.c
@@ -122,7 +122,7 @@ static int s3c6400_serial_probe(struct platform_device *dev)
 	return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
 }
 
-static struct platform_driver s3c6400_serial_drv = {
+static struct platform_driver s3c6400_serial_driver = {
 	.probe		= s3c6400_serial_probe,
 	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
@@ -131,16 +131,16 @@ static struct platform_driver s3c6400_serial_drv = {
 	},
 };
 
-s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+s3c24xx_console_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
 
 static int __init s3c6400_serial_init(void)
 {
-	return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+	return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
 }
 
 static void __exit s3c6400_serial_exit(void)
 {
-	platform_driver_unregister(&s3c6400_serial_drv);
+	platform_driver_unregister(&s3c6400_serial_driver);
 }
 
 module_init(s3c6400_serial_init);
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index c8851a0db63..7d0616495bf 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1263,6 +1263,13 @@ module_exit(s3c24xx_serial_modexit);
 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
 
 static struct uart_port *cons_uart;
+static int cons_silenced;
+
+void s3c24xx_serial_console_set_silence(int silenced)
+{
+	cons_silenced = silenced;
+}
+EXPORT_SYMBOL(s3c24xx_serial_console_set_silence);
 
 static int
 s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
@@ -1287,9 +1294,21 @@ static void
 s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
 {
 	unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
+	unsigned int umcon = rd_regl(cons_uart, S3C2410_UMCON);
+
+	if (cons_silenced)
+		return;
+
+	/* If auto HW flow control enabled, temporarily turn it off */
+	if (umcon & S3C2410_UMCOM_AFC)
+		wr_regl(port, S3C2410_UMCON, (umcon & !S3C2410_UMCOM_AFC));
+
 	while (!s3c24xx_serial_console_txrdy(port, ufcon))
 		barrier();
 	wr_regb(cons_uart, S3C2410_UTXH, ch);
+
+	if (umcon & S3C2410_UMCOM_AFC)
+		wr_regl(port, S3C2410_UMCON, umcon);
 }
 
 static void
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 998e89dc5aa..e0665630e4d 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -549,7 +549,7 @@ static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
 		.mapbase	= KS8695_UART_VA,
 		.iotype		= SERIAL_IO_MEM,
 		.irq		= KS8695_IRQ_UART_TX,
-		.uartclk	= CLOCK_TICK_RATE * 16,
+		.uartclk	= KS8695_CLOCK_RATE * 16,
 		.fifosize	= 16,
 		.ops		= &ks8695uart_pops,
 		.flags		= ASYNC_BOOT_AUTOCONF,
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 66f52674ca0..8e2feb56334 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -707,24 +707,25 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr)
 
 static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 {
-	unsigned short ssr_status, scr_status;
+	unsigned short ssr_status, scr_status, err_enabled;
 	struct uart_port *port = ptr;
 	irqreturn_t ret = IRQ_NONE;
 
 	ssr_status = sci_in(port, SCxSR);
 	scr_status = sci_in(port, SCSCR);
+	err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE);
 
 	/* Tx Interrupt */
-	if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
+	if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE))
 		ret = sci_tx_interrupt(irq, ptr);
 	/* Rx Interrupt */
-	if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE))
+	if ((ssr_status & SCxSR_RDxF(port)) && (scr_status & SCI_CTRL_FLAGS_RIE))
 		ret = sci_rx_interrupt(irq, ptr);
 	/* Error Interrupt */
-	if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE))
+	if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
 		ret = sci_er_interrupt(irq, ptr);
 	/* Break Interrupt */
-	if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE))
+	if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
 		ret = sci_br_interrupt(irq, ptr);
 
 	return ret;
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 0573f3b5175..dac550e57c2 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for NEC VR4100 series Serial Interface Unit.
  *
- *  Copyright (C) 2004-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2004-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  Based on drivers/serial/8250.c, by Russell King.
  *
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index eee4b6e0af2..9b80ad36dbb 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -59,6 +59,8 @@
 
 /* per-register bitmasks: */
 
+#define OMAP2_MCSPI_SYSCONFIG_SMARTIDLE	(2 << 3)
+#define OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP	(1 << 2)
 #define OMAP2_MCSPI_SYSCONFIG_AUTOIDLE	(1 << 0)
 #define OMAP2_MCSPI_SYSCONFIG_SOFTRESET	(1 << 1)
 
@@ -90,6 +92,7 @@
 
 #define OMAP2_MCSPI_CHCTRL_EN		(1 << 0)
 
+#define OMAP2_MCSPI_WAKEUPENABLE_WKEN	(1 << 0)
 
 /* We have 2 DMA channels per CS, one for RX and one for TX */
 struct omap2_mcspi_dma {
@@ -269,7 +272,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 
 	if (rx != NULL) {
 		omap_set_dma_transfer_params(mcspi_dma->dma_rx_channel,
-				data_type, element_count, 1,
+				data_type, element_count - 1, 1,
 				OMAP_DMA_SYNC_ELEMENT,
 				mcspi_dma->dma_rx_sync_dev, 1);
 
@@ -300,6 +303,25 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 	if (rx != NULL) {
 		wait_for_completion(&mcspi_dma->dma_rx_completion);
 		dma_unmap_single(NULL, xfer->rx_dma, count, DMA_FROM_DEVICE);
+		omap2_mcspi_set_enable(spi, 0);
+		if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0)
+				& OMAP2_MCSPI_CHSTAT_RXS)) {
+			u32 w;
+
+			w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
+			if (word_len <= 8)
+				((u8 *)xfer->rx_buf)[element_count - 1] = w;
+			else if (word_len <= 16)
+				((u16 *)xfer->rx_buf)[element_count - 1] = w;
+			else /* word_len <= 32 */
+				((u32 *)xfer->rx_buf)[element_count - 1] = w;
+		} else {
+			dev_err(&spi->dev, "DMA RX last word empty");
+			count -= (word_len <= 8)  ? 1 :
+				 (word_len <= 16) ? 2 :
+			       /* word_len <= 32 */ 4;
+		}
+		omap2_mcspi_set_enable(spi, 1);
 	}
 	return count;
 }
@@ -873,8 +895,12 @@ static int __init omap2_mcspi_reset(struct omap2_mcspi *mcspi)
 	} while (!(tmp & OMAP2_MCSPI_SYSSTATUS_RESETDONE));
 
 	mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG,
-			/* (3 << 8) | (2 << 3) | */
-			OMAP2_MCSPI_SYSCONFIG_AUTOIDLE);
+			OMAP2_MCSPI_SYSCONFIG_AUTOIDLE |
+			OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP |
+			OMAP2_MCSPI_SYSCONFIG_SMARTIDLE);
+
+	mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
+			OMAP2_MCSPI_WAKEUPENABLE_WKEN);
 
 	omap2_mcspi_set_master_mode(master);
 
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index aa90ddb3706..8980a5640bd 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -514,6 +514,8 @@ static int __init uwire_probe(struct platform_device *pdev)
 	/* the spi->mode bits understood by this driver: */
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 
+	master->flags = SPI_MASTER_HALF_DUPLEX;
+
 	master->bus_num = 2;	/* "official" */
 	master->num_chipselect = 4;
 	master->setup = uwire_setup;
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c
index 2a5abc08e85..f1db395dd88 100644
--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@@ -258,6 +258,11 @@ static void bitbang_work(struct work_struct *work)
 	struct spi_bitbang	*bitbang =
 		container_of(work, struct spi_bitbang, work);
 	unsigned long		flags;
+	int			do_setup = -1;
+	int			(*setup_transfer)(struct spi_device *,
+					struct spi_transfer *);
+
+	setup_transfer = bitbang->setup_transfer;
 
 	spin_lock_irqsave(&bitbang->lock, flags);
 	bitbang->busy = 1;
@@ -269,8 +274,6 @@ static void bitbang_work(struct work_struct *work)
 		unsigned		tmp;
 		unsigned		cs_change;
 		int			status;
-		int			(*setup_transfer)(struct spi_device *,
-						struct spi_transfer *);
 
 		m = container_of(bitbang->queue.next, struct spi_message,
 				queue);
@@ -287,19 +290,19 @@ static void bitbang_work(struct work_struct *work)
 		tmp = 0;
 		cs_change = 1;
 		status = 0;
-		setup_transfer = NULL;
 
 		list_for_each_entry (t, &m->transfers, transfer_list) {
 
-			/* override or restore speed and wordsize */
-			if (t->speed_hz || t->bits_per_word) {
-				setup_transfer = bitbang->setup_transfer;
+			/* override speed or wordsize? */
+			if (t->speed_hz || t->bits_per_word)
+				do_setup = 1;
+
+			/* init (-1) or override (1) transfer params */
+			if (do_setup != 0) {
 				if (!setup_transfer) {
 					status = -ENOPROTOOPT;
 					break;
 				}
-			}
-			if (setup_transfer) {
 				status = setup_transfer(spi, t);
 				if (status < 0)
 					break;
@@ -363,9 +366,10 @@ static void bitbang_work(struct work_struct *work)
 		m->status = status;
 		m->complete(m->context);
 
-		/* restore speed and wordsize */
-		if (setup_transfer)
+		/* restore speed and wordsize if it was overridden */
+		if (do_setup == 1)
 			setup_transfer(spi, NULL);
+		do_setup = 0;
 
 		/* normally deactivate chipselect ... unless no error and
 		 * cs_change has hinted that the next message will probably
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index e0d44af4745..3f3119d760d 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -111,29 +111,32 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi,
 	unsigned int bpw;
 	unsigned int hz;
 	unsigned int div;
+	unsigned long clk;
 
 	bpw = t ? t->bits_per_word : spi->bits_per_word;
 	hz  = t ? t->speed_hz : spi->max_speed_hz;
 
+	if (!bpw)
+		bpw = 8;
+
+	if (!hz)
+		hz = spi->max_speed_hz;
+
 	if (bpw != 8) {
 		dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
 		return -EINVAL;
 	}
 
-	div = clk_get_rate(hw->clk) / hz;
-
-	/* is clk = pclk / (2 * (pre+1)), or is it
-	 *    clk = (pclk * 2) / ( pre + 1) */
-
-	div /= 2;
-
-	if (div > 0)
-		div -= 1;
+	clk = clk_get_rate(hw->clk);
+	div = DIV_ROUND_UP(clk, hz * 2) - 1;
 
 	if (div > 255)
 		div = 255;
 
-	dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
+	dev_dbg(&spi->dev, "setting pre-scaler to %d (wanted %d, got %ld)\n",
+		div, hz, clk / (2 * (div + 1)));
+
+
 	writeb(div, hw->regs + S3C2410_SPPRE);
 
 	spin_lock(&hw->bitbang.lock);
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 5d869c4d3eb..606e7a40a8d 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -58,15 +58,20 @@ static unsigned long	minors[N_SPI_MINORS / BITS_PER_LONG];
 
 
 /* Bit masks for spi_device.mode management.  Note that incorrect
- * settings for CS_HIGH and 3WIRE can cause *lots* of trouble for other
- * devices on a shared bus:  CS_HIGH, because this device will be
- * active when it shouldn't be;  3WIRE, because when active it won't
- * behave as it should.
+ * settings for some settings can cause *lots* of trouble for other
+ * devices on a shared bus:
  *
- * REVISIT should changing those two modes be privileged?
+ *  - CS_HIGH ... this device will be active when it shouldn't be
+ *  - 3WIRE ... when active, it won't behave as it should
+ *  - NO_CS ... there will be no explicit message boundaries; this
+ *	is completely incompatible with the shared bus model
+ *  - READY ... transfers may proceed when they shouldn't.
+ *
+ * REVISIT should changing those flags be privileged?
  */
 #define SPI_MODE_MASK		(SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \
-				| SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP)
+				| SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \
+				| SPI_NO_CS | SPI_READY)
 
 struct spidev_data {
 	dev_t			devt;
diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c
index 3fd3e3b412b..3c6feed46f6 100644
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -49,29 +49,54 @@ static const u32 ipsflag_irq_shift[] = {
 
 static inline u32 ssb_irqflag(struct ssb_device *dev)
 {
-	return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
+	u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG);
+	if (tpsflag)
+		return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
+	else
+		/* not irq supported */
+		return 0x3f;
+}
+
+static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag)
+{
+	struct ssb_bus *bus = rdev->bus;
+	int i;
+	for (i = 0; i < bus->nr_devices; i++) {
+		struct ssb_device *dev;
+		dev = &(bus->devices[i]);
+		if (ssb_irqflag(dev) == irqflag)
+			return dev;
+	}
+	return NULL;
 }
 
 /* Get the MIPS IRQ assignment for a specified device.
  * If unassigned, 0 is returned.
+ * If disabled, 5 is returned.
+ * If not supported, 6 is returned.
  */
 unsigned int ssb_mips_irq(struct ssb_device *dev)
 {
 	struct ssb_bus *bus = dev->bus;
+	struct ssb_device *mdev = bus->mipscore.dev;
 	u32 irqflag;
 	u32 ipsflag;
 	u32 tmp;
 	unsigned int irq;
 
 	irqflag = ssb_irqflag(dev);
+	if (irqflag == 0x3f)
+		return 6;
 	ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG);
 	for (irq = 1; irq <= 4; irq++) {
 		tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]);
 		if (tmp == irqflag)
 			break;
 	}
-	if (irq	== 5)
-		irq = 0;
+	if (irq	== 5) {
+		if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))
+			irq = 0;
+	}
 
 	return irq;
 }
@@ -97,25 +122,56 @@ static void set_irq(struct ssb_device *dev, unsigned int irq)
 	struct ssb_device *mdev = bus->mipscore.dev;
 	u32 irqflag = ssb_irqflag(dev);
 
+	BUG_ON(oldirq == 6);
+
 	dev->irq = irq + 2;
 
-	ssb_dprintk(KERN_INFO PFX
-		    "set_irq: core 0x%04x, irq %d => %d\n",
-		    dev->id.coreid, oldirq, irq);
 	/* clear the old irq */
 	if (oldirq == 0)
 		ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
-	else
+	else if (oldirq != 5)
 		clear_irq(bus, oldirq);
 
 	/* assign the new one */
 	if (irq == 0) {
 		ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC)));
 	} else {
+		u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG);
+		if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) {
+			u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq];
+			struct ssb_device *olddev = find_device(dev, oldipsflag);
+			if (olddev)
+				set_irq(olddev, 0);
+		}
 		irqflag <<= ipsflag_irq_shift[irq];
-		irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
+		irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
 		ssb_write32(mdev, SSB_IPSFLAG, irqflag);
 	}
+	ssb_dprintk(KERN_INFO PFX
+		    "set_irq: core 0x%04x, irq %d => %d\n",
+		    dev->id.coreid, oldirq+2, irq+2);
+}
+
+static void print_irq(struct ssb_device *dev, unsigned int irq)
+{
+	int i;
+	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+	ssb_dprintk(KERN_INFO PFX
+		"core 0x%04x, irq :", dev->id.coreid);
+	for (i = 0; i <= 6; i++) {
+		ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
+	}
+	ssb_dprintk("\n");
+}
+
+static void dump_irq(struct ssb_bus *bus)
+{
+	int i;
+	for (i = 0; i < bus->nr_devices; i++) {
+		struct ssb_device *dev;
+		dev = &(bus->devices[i]);
+		print_irq(dev, ssb_mips_irq(dev));
+	}
 }
 
 static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
@@ -197,16 +253,23 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore)
 
 	/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
 	for (irq = 2, i = 0; i < bus->nr_devices; i++) {
+		int mips_irq;
 		dev = &(bus->devices[i]);
-		dev->irq = ssb_mips_irq(dev) + 2;
+		mips_irq = ssb_mips_irq(dev);
+		if (mips_irq > 4)
+			dev->irq = 0;
+		else
+			dev->irq = mips_irq + 2;
+		if (dev->irq > 5)
+			continue;
 		switch (dev->id.coreid) {
 		case SSB_DEV_USB11_HOST:
 			/* shouldn't need a separate irq line for non-4710, most of them have a proper
 			 * external usb controller on the pci */
 			if ((bus->chip_id == 0x4710) && (irq <= 4)) {
 				set_irq(dev, irq++);
-				break;
 			}
+			break;
 			/* fallthrough */
 		case SSB_DEV_PCI:
 		case SSB_DEV_ETHERNET:
@@ -220,6 +283,8 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore)
 			}
 		}
 	}
+	ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
+	dump_irq(bus);
 
 	ssb_mips_serial_init(mcore);
 	ssb_mips_flash_detect(mcore);
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index fbfadbac67e..100e7a5c5ea 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(struct ssb_bus *bus, const u16 *sprom)
 			ssb_printk(".");
 		err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
 		if (err) {
-			ssb_printk("\n" KERN_NOTICE PFX
+			ssb_printk(KERN_NOTICE PFX
 				   "Failed to write to SPROM.\n");
 			failed = 1;
 			break;
@@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(struct ssb_bus *bus, const u16 *sprom)
 	}
 	err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
 	if (err) {
-		ssb_printk("\n" KERN_NOTICE PFX
+		ssb_printk(KERN_NOTICE PFX
 			   "Could not disable SPROM write access.\n");
 		failed = 1;
 	}
@@ -678,7 +678,8 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
 			sprom->board_rev = tuple.TupleData[1];
 			break;
 		case SSB_PCMCIA_CIS_PA:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 9,
+			GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
+				      (tuple.TupleDataLen != 10),
 				      "pa tpl size");
 			sprom->pa0b0 = tuple.TupleData[1] |
 				 ((u16)tuple.TupleData[2] << 8);
@@ -718,7 +719,8 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
 			sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
 			break;
 		case SSB_PCMCIA_CIS_BFLAGS:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 3,
+			GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
+				      (tuple.TupleDataLen != 5),
 				      "bfl tpl size");
 			sprom->boardflags_lo = tuple.TupleData[1] |
 					 ((u16)tuple.TupleData[2] << 8);
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 348bf61a8fe..975ecddbce3 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -103,8 +103,6 @@ source "drivers/staging/pohmelfs/Kconfig"
 
 source "drivers/staging/stlc45xx/Kconfig"
 
-source "drivers/staging/uc2322/Kconfig"
-
 source "drivers/staging/b3dfg/Kconfig"
 
 source "drivers/staging/phison/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 8d61d7b4deb..2241ae1b21e 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -34,7 +34,6 @@ obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_DST)		+= dst/
 obj-$(CONFIG_POHMELFS)		+= pohmelfs/
 obj-$(CONFIG_STLC45XX)		+= stlc45xx/
-obj-$(CONFIG_USB_SERIAL_ATEN2011)	+= uc2322/
 obj-$(CONFIG_B3DFG)		+= b3dfg/
 obj-$(CONFIG_IDE_PHISON)	+= phison/
 obj-$(CONFIG_PLAN9AUTH)		+= p9auth/
diff --git a/drivers/staging/android/lowmemorykiller.c b/drivers/staging/android/lowmemorykiller.c
index fe72240f5a9..f934393f395 100644
--- a/drivers/staging/android/lowmemorykiller.c
+++ b/drivers/staging/android/lowmemorykiller.c
@@ -96,19 +96,21 @@ static int lowmem_shrink(int nr_to_scan, gfp_t gfp_mask)
 
 	read_lock(&tasklist_lock);
 	for_each_process(p) {
+		struct mm_struct *mm;
 		int oom_adj;
 
 		task_lock(p);
-		if (!p->mm) {
+		mm = p->mm;
+		if (!mm) {
 			task_unlock(p);
 			continue;
 		}
-		oom_adj = p->oomkilladj;
+		oom_adj = mm->oom_adj;
 		if (oom_adj < min_adj) {
 			task_unlock(p);
 			continue;
 		}
-		tasksize = get_mm_rss(p->mm);
+		tasksize = get_mm_rss(mm);
 		task_unlock(p);
 		if (tasksize <= 0)
 			continue;
diff --git a/drivers/staging/b3dfg/Kconfig b/drivers/staging/b3dfg/Kconfig
index 524231047de..9e6573cf97d 100644
--- a/drivers/staging/b3dfg/Kconfig
+++ b/drivers/staging/b3dfg/Kconfig
@@ -1,5 +1,6 @@
 config B3DFG
        tristate "Brontes 3d Frame Framegrabber"
+       depends on PCI
        default n
        ---help---
          This driver provides support for the Brontes 3d Framegrabber
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index baf83c6a941..e3c3adc282e 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -45,6 +45,8 @@ Devices: [JR3] PCI force sensor board (jr3_pci)
 #include <linux/delay.h>
 #include <linux/ctype.h>
 #include <linux/firmware.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
 #include "comedi_pci.h"
 #include "jr3_pci.h"
 
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 92121cf8c45..5d9bab352c1 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -111,9 +111,13 @@ static const struct s626_board s626_boards[] = {
 #define PCI_VENDOR_ID_S626 0x1131
 #define PCI_DEVICE_ID_S626 0x7146
 
+/*
+ * For devices with vendor:device id == 0x1131:0x7146 you must specify
+ * also subvendor:subdevice ids, because otherwise it will conflict with
+ * Philips SAA7146 media/dvb based cards.
+ */
 static DEFINE_PCI_DEVICE_TABLE(s626_pci_table) = {
-	{PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		0},
+	{PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, 0x6000, 0x0272, 0, 0, 0},
 	{0}
 };
 
@@ -499,25 +503,26 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	resource_size_t resourceStart;
 	dma_addr_t appdma;
 	struct comedi_subdevice *s;
-	struct pci_dev *pdev;
+	const struct pci_device_id *ids;
+	struct pci_dev *pdev = NULL;
 
 	if (alloc_private(dev, sizeof(struct s626_private)) < 0)
 		return -ENOMEM;
 
-	for (pdev = pci_get_device(PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626,
-			NULL); pdev != NULL;
-		pdev = pci_get_device(PCI_VENDOR_ID_S626,
-			PCI_DEVICE_ID_S626, pdev)) {
-		if (it->options[0] || it->options[1]) {
-			if (pdev->bus->number == it->options[0] &&
-				PCI_SLOT(pdev->devfn) == it->options[1]) {
+	for (i = 0; i < (ARRAY_SIZE(s626_pci_table) - 1) && !pdev; i++) {
+		ids = &s626_pci_table[i];
+		do {
+			pdev = pci_get_subsys(ids->vendor, ids->device, ids->subvendor,
+					      ids->subdevice, pdev);
+
+			if ((it->options[0] || it->options[1]) && pdev) {
 				/* matches requested bus/slot */
+				if (pdev->bus->number == it->options[0] &&
+				    PCI_SLOT(pdev->devfn) == it->options[1])
+					break;
+			} else
 				break;
-			}
-		} else {
-			/* no bus/slot specified */
-			break;
-		}
+		} while (1);
 	}
 	devpriv->pdev = pdev;
 
diff --git a/drivers/staging/go7007/s2250-loader.c b/drivers/staging/go7007/s2250-loader.c
index a5e4acab089..bb22347af60 100644
--- a/drivers/staging/go7007/s2250-loader.c
+++ b/drivers/staging/go7007/s2250-loader.c
@@ -17,6 +17,7 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/smp_lock.h>
 #include <linux/usb.h>
 #include <dvb-usb.h>
 
diff --git a/drivers/staging/heci/Kconfig b/drivers/staging/heci/Kconfig
index ae8d588d3a2..c7206f8bcd9 100644
--- a/drivers/staging/heci/Kconfig
+++ b/drivers/staging/heci/Kconfig
@@ -1,5 +1,6 @@
 config HECI
 	tristate "Intel Management Engine Interface (MEI) Support"
+	depends on PCI
 	---help---
 	  The Intel Management Engine Interface (Intel MEI) driver allows
 	  applications to access the Active Management Technology
diff --git a/drivers/staging/meilhaus/TODO b/drivers/staging/meilhaus/TODO
index 6ec25203089..d6ce39823de 100644
--- a/drivers/staging/meilhaus/TODO
+++ b/drivers/staging/meilhaus/TODO
@@ -7,4 +7,4 @@ TODO:
 	- possible comedi merge
 
 Please send cleanup patches to Greg Kroah-Hartman <greg@kroah.com>
-and CC: David Kiliani <mail@davidkiliani.de>
+and CC: David Kiliani <mail@davidkiliani.de> and Meilhaus Support <support@meilhaus.de>
diff --git a/drivers/staging/rspiusb/rspiusb.c b/drivers/staging/rspiusb/rspiusb.c
index 1cdfe69585e..04e2f92c0f6 100644
--- a/drivers/staging/rspiusb/rspiusb.c
+++ b/drivers/staging/rspiusb/rspiusb.c
@@ -444,8 +444,7 @@ static void piusb_write_bulk_callback(struct urb *urb)
 			__func__, status);
 
 	pdx->pendingWrite = 0;
-	usb_buffer_free(urb->dev, urb->transfer_buffer_length,
-			urb->transfer_buffer, urb->transfer_dma);
+	kfree(urb->transfer_buffer);
 }
 
 int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len,
@@ -457,9 +456,7 @@ int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len,
 
 	urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (urb != NULL) {
-		kbuf =
-		    usb_buffer_alloc(pdx->udev, len, GFP_KERNEL,
-				     &urb->transfer_dma);
+		kbuf = kmalloc(len, GFP_KERNEL);
 		if (!kbuf) {
 			dev_err(&pdx->udev->dev, "buffer_alloc failed\n");
 			return -ENOMEM;
@@ -470,7 +467,6 @@ int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len,
 		}
 		usb_fill_bulk_urb(urb, pdx->udev, pdx->hEP[io->endpoint], kbuf,
 				  len, piusb_write_bulk_callback, pdx);
-		urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 		err = usb_submit_urb(urb, GFP_KERNEL);
 		if (err) {
 			dev_err(&pdx->udev->dev,
@@ -641,7 +637,7 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
 	numPagesRequired =
 	    ((uaddr & ~PAGE_MASK) + count + ~PAGE_MASK) >> PAGE_SHIFT;
 	dbg("Number of pages needed = %d", numPagesRequired);
-	maplist_p = vmalloc(numPagesRequired * sizeof(struct page));
+	maplist_p = vmalloc(numPagesRequired * sizeof(struct page *));
 	if (!maplist_p) {
 		dbg("Can't Allocate Memory for maplist_p");
 		return -ENOMEM;
@@ -712,9 +708,7 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
 		usb_fill_bulk_urb(pdx->PixelUrb[frameInfo][i],
 				  pdx->udev,
 				  epAddr,
-				  (dma_addr_t *) sg_dma_address(&pdx->
-								sgl[frameInfo]
-								[i]),
+				  NULL, // non-DMA HC? buy a better hardware
 				  sg_dma_len(&pdx->sgl[frameInfo][i]),
 				  piusb_readPIXEL_callback, (void *)pdx);
 		pdx->PixelUrb[frameInfo][i]->transfer_dma =
@@ -722,6 +716,8 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
 		pdx->PixelUrb[frameInfo][i]->transfer_flags =
 		    URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT;
 	}
+	if (i == 0)
+		return -EINVAL;
 	/* only interrupt when last URB completes */
 	pdx->PixelUrb[frameInfo][--i]->transfer_flags &= ~URB_NO_INTERRUPT;
 	pdx->pendedPixelUrbs[frameInfo] =
diff --git a/drivers/staging/rt2860/rt_linux.h b/drivers/staging/rt2860/rt_linux.h
index 85175c18243..25b53ac3f82 100644
--- a/drivers/staging/rt2860/rt_linux.h
+++ b/drivers/staging/rt2860/rt_linux.h
@@ -43,9 +43,6 @@
 #include "rtmp_type.h"
 #include <linux/module.h>
 #include <linux/kernel.h>
-#if !defined(RT2860) && !defined(RT30xx)
-#include <linux/kthread.h>
-#endif
 
 #include <linux/spinlock.h>
 #include <linux/init.h>
@@ -166,9 +163,7 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_
 
 #ifndef RT30xx
 typedef	struct pid *	THREAD_PID;
-#ifdef RT2860
 #define	THREAD_PID_INIT_VALUE	NULL
-#endif
 #define	GET_PID(_v)	find_get_pid(_v)
 #define	GET_PID_NUMBER(_v)	pid_nr(_v)
 #define CHECK_PID_LEGALITY(_pid)	if (pid_nr(_pid) >= 0)
@@ -188,12 +183,12 @@ struct os_cookie {
 	dma_addr_t		  		pAd_pa;
 #endif
 #ifdef RT2870
-	struct usb_device	*pUsb_Dev;
+	struct usb_device		*pUsb_Dev;
 
 #ifndef RT30xx
-	struct task_struct	*MLMEThr_task;
-	struct task_struct	*RTUSBCmdThr_task;
-	struct task_struct	*TimerQThr_task;
+	THREAD_PID				MLMEThr_pid;
+	THREAD_PID				RTUSBCmdThr_pid;
+	THREAD_PID				TimerQThr_pid;
 #endif
 #ifdef RT30xx
 	struct pid	*MLMEThr_pid;
diff --git a/drivers/staging/rt2870/2870_main_dev.c b/drivers/staging/rt2870/2870_main_dev.c
index dd01c64fbf6..a4e8696ca39 100644
--- a/drivers/staging/rt2870/2870_main_dev.c
+++ b/drivers/staging/rt2870/2870_main_dev.c
@@ -235,7 +235,7 @@ INT MlmeThread(
 	DBGPRINT(RT_DEBUG_TRACE,( "<---%s\n",__func__));
 
 #ifndef RT30xx
-	pObj->MLMEThr_task = NULL;
+	pObj->MLMEThr_pid = THREAD_PID_INIT_VALUE;
 #endif
 #ifdef RT30xx
 	pObj->MLMEThr_pid = NULL;
@@ -348,7 +348,7 @@ INT RTUSBCmdThread(
 	DBGPRINT(RT_DEBUG_TRACE,( "<---RTUSBCmdThread\n"));
 
 #ifndef RT30xx
-	pObj->RTUSBCmdThr_task = NULL;
+	pObj->RTUSBCmdThr_pid = THREAD_PID_INIT_VALUE;
 #endif
 #ifdef RT30xx
 	pObj->RTUSBCmdThr_pid = NULL;
@@ -447,7 +447,7 @@ INT TimerQThread(
 	DBGPRINT(RT_DEBUG_TRACE,( "<---%s\n",__func__));
 
 #ifndef RT30xx
-	pObj->TimerQThr_task = NULL;
+	pObj->TimerQThr_pid = THREAD_PID_INIT_VALUE;
 #endif
 #ifdef RT30xx
 	pObj->TimerQThr_pid = NULL;
@@ -883,46 +883,69 @@ VOID RT28xxThreadTerminate(
 
 	// Terminate Threads
 #ifndef RT30xx
-	BUG_ON(pObj->TimerQThr_task == NULL);
-	CHECK_PID_LEGALITY(task_pid(pObj->TimerQThr_task))
+	CHECK_PID_LEGALITY(pObj->TimerQThr_pid)
 	{
 		POS_COOKIE pObj = (POS_COOKIE)pAd->OS_Cookie;
 
-		printk(KERN_DEBUG "Terminate the TimerQThr pid=%d!\n",
-			pid_nr(task_pid(pObj->TimerQThr_task)));
+		printk("Terminate the TimerQThr_pid=%d!\n", GET_PID_NUMBER(pObj->TimerQThr_pid));
 		mb();
 		pAd->TimerFunc_kill = 1;
 		mb();
-		kthread_stop(pObj->TimerQThr_task);
-		pObj->TimerQThr_task = NULL;
+		ret = KILL_THREAD_PID(pObj->TimerQThr_pid, SIGTERM, 1);
+		if (ret)
+		{
+			printk(KERN_WARNING "%s: unable to stop TimerQThread, pid=%d, ret=%d!\n",
+					pAd->net_dev->name, GET_PID_NUMBER(pObj->TimerQThr_pid), ret);
+		}
+		else
+		{
+			wait_for_completion(&pAd->TimerQComplete);
+			pObj->TimerQThr_pid = THREAD_PID_INIT_VALUE;
+		}
 	}
 
-	BUG_ON(pObj->MLMEThr_task == NULL);
-	CHECK_PID_LEGALITY(task_pid(pObj->MLMEThr_task))
+	CHECK_PID_LEGALITY(pObj->MLMEThr_pid)
 	{
-		printk(KERN_DEBUG "Terminate the MLMEThr pid=%d!\n",
-			pid_nr(task_pid(pObj->MLMEThr_task)));
+		printk("Terminate the MLMEThr_pid=%d!\n", GET_PID_NUMBER(pObj->MLMEThr_pid));
 		mb();
 		pAd->mlme_kill = 1;
 		//RT28XX_MLME_HANDLER(pAd);
 		mb();
-		kthread_stop(pObj->MLMEThr_task);
-		pObj->MLMEThr_task = NULL;
+		ret = KILL_THREAD_PID(pObj->MLMEThr_pid, SIGTERM, 1);
+		if (ret)
+		{
+			printk (KERN_WARNING "%s: unable to Mlme thread, pid=%d, ret=%d!\n",
+					pAd->net_dev->name, GET_PID_NUMBER(pObj->MLMEThr_pid), ret);
+		}
+		else
+		{
+			//wait_for_completion (&pAd->notify);
+			wait_for_completion (&pAd->mlmeComplete);
+			pObj->MLMEThr_pid = THREAD_PID_INIT_VALUE;
+		}
 	}
 
-	BUG_ON(pObj->RTUSBCmdThr_task == NULL);
-	CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task))
+	CHECK_PID_LEGALITY(pObj->RTUSBCmdThr_pid)
 	{
-		printk(KERN_DEBUG "Terminate the RTUSBCmdThr pid=%d!\n",
-			pid_nr(task_pid(pObj->RTUSBCmdThr_task)));
+		printk("Terminate the RTUSBCmdThr_pid=%d!\n", GET_PID_NUMBER(pObj->RTUSBCmdThr_pid));
 		mb();
 		NdisAcquireSpinLock(&pAd->CmdQLock);
 		pAd->CmdQ.CmdQState = RT2870_THREAD_STOPED;
 		NdisReleaseSpinLock(&pAd->CmdQLock);
 		mb();
 		//RTUSBCMDUp(pAd);
-		kthread_stop(pObj->RTUSBCmdThr_task);
-		pObj->RTUSBCmdThr_task = NULL;
+		ret = KILL_THREAD_PID(pObj->RTUSBCmdThr_pid, SIGTERM, 1);
+		if (ret)
+		{
+			printk(KERN_WARNING "%s: unable to RTUSBCmd thread, pid=%d, ret=%d!\n",
+					pAd->net_dev->name, GET_PID_NUMBER(pObj->RTUSBCmdThr_pid), ret);
+		}
+		else
+		{
+			//wait_for_completion (&pAd->notify);
+			wait_for_completion (&pAd->CmdQComplete);
+			pObj->RTUSBCmdThr_pid = THREAD_PID_INIT_VALUE;
+		}
 	}
 #endif
 #ifdef RT30xx
@@ -1045,7 +1068,7 @@ BOOLEAN RT28XXChipsetCheck(
 			dev_p->descriptor.idProduct == rtusb_usb_id[i].idProduct)
 		{
 #ifndef RT30xx
-			printk(KERN_DEBUG "rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
+			printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
 #endif
 #ifdef RT30xx
 			printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
diff --git a/drivers/staging/rt2870/common/2870_rtmp_init.c b/drivers/staging/rt2870/common/2870_rtmp_init.c
index 0f4c8af97e4..80909e9ab5a 100644
--- a/drivers/staging/rt2870/common/2870_rtmp_init.c
+++ b/drivers/staging/rt2870/common/2870_rtmp_init.c
@@ -700,8 +700,8 @@ NDIS_STATUS AdapterBlockAllocateMemory(
 	usb_dev = pObj->pUsb_Dev;
 
 #ifndef RT30xx
-	pObj->MLMEThr_task		= NULL;
-	pObj->RTUSBCmdThr_task	= NULL;
+	pObj->MLMEThr_pid		= THREAD_PID_INIT_VALUE;
+	pObj->RTUSBCmdThr_pid	= THREAD_PID_INIT_VALUE;
 #endif
 #ifdef RT30xx
 	pObj->MLMEThr_pid	= NULL;
@@ -743,7 +743,7 @@ NDIS_STATUS	 CreateThreads(
 	PRTMP_ADAPTER pAd = net_dev->ml_priv;
 	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
 #ifndef RT30xx
-	struct task_struct *tsk;
+	pid_t pid_number = -1;
 #endif
 #ifdef RT30xx
 	pid_t pid_number;
@@ -762,10 +762,10 @@ NDIS_STATUS	 CreateThreads(
 
 	// Creat MLME Thread
 #ifndef RT30xx
-	pObj->MLMEThr_task = NULL;
-	tsk = kthread_run(MlmeThread, pAd, "%s", pAd->net_dev->name);
-
-	if (IS_ERR(tsk)) {
+	pObj->MLMEThr_pid= THREAD_PID_INIT_VALUE;
+	pid_number = kernel_thread(MlmeThread, pAd, CLONE_VM);
+	if (pid_number < 0)
+	{
 #endif
 #ifdef RT30xx
 	pObj->MLMEThr_pid = NULL;
@@ -778,7 +778,7 @@ NDIS_STATUS	 CreateThreads(
 	}
 
 #ifndef RT30xx
-	pObj->MLMEThr_task = tsk;
+	pObj->MLMEThr_pid = GET_PID(pid_number);
 #endif
 #ifdef RT30xx
 	pObj->MLMEThr_pid = find_get_pid(pid_number);
@@ -788,10 +788,9 @@ NDIS_STATUS	 CreateThreads(
 
 	// Creat Command Thread
 #ifndef RT30xx
-	pObj->RTUSBCmdThr_task = NULL;
-	tsk = kthread_run(RTUSBCmdThread, pAd, "%s", pAd->net_dev->name);
-
-	if (IS_ERR(tsk) < 0)
+	pObj->RTUSBCmdThr_pid= THREAD_PID_INIT_VALUE;
+	pid_number = kernel_thread(RTUSBCmdThread, pAd, CLONE_VM);
+	if (pid_number < 0)
 #endif
 #ifdef RT30xx
 	pObj->RTUSBCmdThr_pid = NULL;
@@ -804,7 +803,7 @@ NDIS_STATUS	 CreateThreads(
 	}
 
 #ifndef RT30xx
-	pObj->RTUSBCmdThr_task = tsk;
+	pObj->RTUSBCmdThr_pid = GET_PID(pid_number);
 #endif
 #ifdef RT30xx
 	pObj->RTUSBCmdThr_pid = find_get_pid(pid_number);
@@ -812,9 +811,9 @@ NDIS_STATUS	 CreateThreads(
 	wait_for_completion(&(pAd->CmdQComplete));
 
 #ifndef RT30xx
-	pObj->TimerQThr_task = NULL;
-	tsk = kthread_run(TimerQThread, pAd, "%s", pAd->net_dev->name);
-	if (IS_ERR(tsk) < 0)
+	pObj->TimerQThr_pid= THREAD_PID_INIT_VALUE;
+	pid_number = kernel_thread(TimerQThread, pAd, CLONE_VM);
+	if (pid_number < 0)
 #endif
 #ifdef RT30xx
 	pObj->TimerQThr_pid = NULL;
@@ -826,7 +825,7 @@ NDIS_STATUS	 CreateThreads(
 		return NDIS_STATUS_FAILURE;
 	}
 #ifndef RT30xx
-	pObj->TimerQThr_task = tsk;
+	pObj->TimerQThr_pid = GET_PID(pid_number);
 #endif
 #ifdef RT30xx
 	pObj->TimerQThr_pid = find_get_pid(pid_number);
diff --git a/drivers/staging/rt2870/common/rtusb_io.c b/drivers/staging/rt2870/common/rtusb_io.c
index fd1b0c18f2a..704b5c2d509 100644
--- a/drivers/staging/rt2870/common/rtusb_io.c
+++ b/drivers/staging/rt2870/common/rtusb_io.c
@@ -984,8 +984,7 @@ NDIS_STATUS	RTUSBEnqueueCmdFromNdis(
 	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
 
 #ifndef RT30xx
-	BUG_ON(pObj->RTUSBCmdThr_task == NULL);
-	CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task))
+	CHECK_PID_LEGALITY(pObj->RTUSBCmdThr_pid)
 #endif
 #ifdef RT30xx
 	if (pObj->RTUSBCmdThr_pid < 0)
diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h
index 5e5b3f2b7eb..2b8872b2fd9 100644
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -79,6 +79,7 @@
 {	\
 	{USB_DEVICE(0x148F,0x2770)}, /* Ralink */		\
 	{USB_DEVICE(0x1737,0x0071)}, /* Linksys WUSB600N */	\
+	{USB_DEVICE(0x1737,0x0070)}, /* Linksys */	\
 	{USB_DEVICE(0x148F,0x2870)}, /* Ralink */		\
 	{USB_DEVICE(0x148F,0x3070)}, /* Ralink */		\
 	{USB_DEVICE(0x0B05,0x1731)}, /* Asus */			\
@@ -89,15 +90,18 @@
 	{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */		\
 	{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */		\
 	{USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom */		\
+	{USB_DEVICE(0x0DF6,0x003F)}, /* Sitecom WL-608 */	\
 	{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */		\
 	{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */		\
 	{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */		\
+	{USB_DEVICE(0x2019,0xED14)}, /* Planex Communications, Inc. */		\
 	{USB_DEVICE(0x2019,0xAB25)}, /* Planex Communications, Inc. RT3070 */		\
 	{USB_DEVICE(0x07D1,0x3C09)}, /* D-Link */		\
 	{USB_DEVICE(0x07D1,0x3C11)}, /* D-Link */		\
 	{USB_DEVICE(0x14B2,0x3C07)}, /* AL */			\
 	{USB_DEVICE(0x14B2,0x3C12)}, /* AL */           \
 	{USB_DEVICE(0x050D,0x8053)}, /* Belkin */		\
+	{USB_DEVICE(0x050D,0x815C)}, /* Belkin */		\
 	{USB_DEVICE(0x14B2,0x3C23)}, /* Airlink */		\
 	{USB_DEVICE(0x14B2,0x3C27)}, /* Airlink */		\
 	{USB_DEVICE(0x07AA,0x002F)}, /* Corega */		\
@@ -586,16 +590,14 @@ VOID RTUSBBulkRxComplete(purbb_t pUrb, struct pt_regs *pt_regs);
 #define RTUSBMlmeUp(pAd)	        \
 {								    \
 	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;	\
-	BUG_ON(pObj->MLMEThr_task == NULL);		    \
-	CHECK_PID_LEGALITY(task_pid(pObj->MLMEThr_task))		    \
+	CHECK_PID_LEGALITY(pObj->MLMEThr_pid)		    \
         up(&(pAd->mlme_semaphore)); \
 }
 
 #define RTUSBCMDUp(pAd)	                \
 {									    \
 	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;	\
-	BUG_ON(pObj->RTUSBCmdThr_task == NULL);	    \
-	CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task))	    \
+	CHECK_PID_LEGALITY(pObj->RTUSBCmdThr_pid)	    \
 	    up(&(pAd->RTUSBCmd_semaphore)); \
 }
 #endif
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
index 93af37e2d31..54b4b718f84 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
@@ -461,19 +461,19 @@ int ieee80211_wx_get_name(struct ieee80211_device *ieee,
 			     struct iw_request_info *info,
 			     union iwreq_data *wrqu, char *extra)
 {
-	strcpy(wrqu->name, "802.11");
+	strlcpy(wrqu->name, "802.11", IFNAMSIZ);
 	if(ieee->modulation & IEEE80211_CCK_MODULATION){
-		strcat(wrqu->name, "b");
+		strlcat(wrqu->name, "b", IFNAMSIZ);
 		if(ieee->modulation & IEEE80211_OFDM_MODULATION)
-			strcat(wrqu->name, "/g");
+			strlcat(wrqu->name, "/g", IFNAMSIZ);
 	}else if(ieee->modulation & IEEE80211_OFDM_MODULATION)
-		strcat(wrqu->name, "g");
+		strlcat(wrqu->name, "g", IFNAMSIZ);
 
 	if((ieee->state == IEEE80211_LINKED) ||
 		(ieee->state == IEEE80211_LINKED_SCANNING))
-		strcat(wrqu->name," linked");
+		strlcat(wrqu->name,"  link", IFNAMSIZ);
 	else if(ieee->state != IEEE80211_NOLINK)
-		strcat(wrqu->name," link..");
+		strlcat(wrqu->name," .....", IFNAMSIZ);
 
 
 	return 0;
diff --git a/drivers/staging/rtl8192su/Kconfig b/drivers/staging/rtl8192su/Kconfig
index 4b5552c5926..770f41280f2 100644
--- a/drivers/staging/rtl8192su/Kconfig
+++ b/drivers/staging/rtl8192su/Kconfig
@@ -1,6 +1,6 @@
 config RTL8192SU
 	tristate "RealTek RTL8192SU Wireless LAN NIC driver"
 	depends on PCI
-	depends on WIRELESS_EXT && COMPAT_NET_DEV_OPS
+	depends on WIRELESS_EXT
 	default N
 	---help---
diff --git a/drivers/staging/rtl8192su/ieee80211.h b/drivers/staging/rtl8192su/ieee80211.h
index 0edb09a536f..ea973931803 100644
--- a/drivers/staging/rtl8192su/ieee80211.h
+++ b/drivers/staging/rtl8192su/ieee80211.h
@@ -2645,7 +2645,7 @@ extern int ieee80211_encrypt_fragment(
 	struct sk_buff *frag,
 	int hdr_len);
 
-extern int ieee80211_xmit(struct sk_buff *skb,
+extern int rtl8192_ieee80211_xmit(struct sk_buff *skb,
 			  struct net_device *dev);
 extern void ieee80211_txb_free(struct ieee80211_txb *);
 
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211.h b/drivers/staging/rtl8192su/ieee80211/ieee80211.h
index 720bfcbfadc..5e3a2cbed2b 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211.h
@@ -2645,7 +2645,7 @@ extern int ieee80211_encrypt_fragment(
 	struct sk_buff *frag,
 	int hdr_len);
 
-extern int ieee80211_xmit(struct sk_buff *skb,
+extern int rtl8192_ieee80211_xmit(struct sk_buff *skb,
 			  struct net_device *dev);
 extern void ieee80211_txb_free(struct ieee80211_txb *);
 
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
index f408b4583b8..759032db4a3 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
@@ -118,7 +118,6 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
 #else
 	ieee = (struct ieee80211_device *)dev->priv;
 #endif
-	dev->hard_start_xmit = ieee80211_xmit;
 
 	memset(ieee, 0, sizeof(struct ieee80211_device)+sizeof_priv);
 	ieee->dev = dev;
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
index 1f50c46dcb9..191dc3fbbe3 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
@@ -548,21 +548,21 @@ int ieee80211_wx_get_name(struct ieee80211_device *ieee,
 			     struct iw_request_info *info,
 			     union iwreq_data *wrqu, char *extra)
 {
-	strcpy(wrqu->name, "802.11");
+	strlcpy(wrqu->name, "802.11", IFNAMSIZ);
 	if(ieee->modulation & IEEE80211_CCK_MODULATION){
-		strcat(wrqu->name, "b");
+		strlcat(wrqu->name, "b", IFNAMSIZ);
 		if(ieee->modulation & IEEE80211_OFDM_MODULATION)
-			strcat(wrqu->name, "/g");
+			strlcat(wrqu->name, "/g", IFNAMSIZ);
 	}else if(ieee->modulation & IEEE80211_OFDM_MODULATION)
-		strcat(wrqu->name, "g");
+		strlcat(wrqu->name, "g", IFNAMSIZ);
 	if (ieee->mode & (IEEE_N_24G | IEEE_N_5G))
-		strcat(wrqu->name, "/n");
+		strlcat(wrqu->name, "/n", IFNAMSIZ);
 
 	if((ieee->state == IEEE80211_LINKED) ||
 		(ieee->state == IEEE80211_LINKED_SCANNING))
-		strcat(wrqu->name," linked");
+		strlcat(wrqu->name, "  link", IFNAMSIZ);
 	else if(ieee->state != IEEE80211_NOLINK)
-		strcat(wrqu->name," link..");
+		strlcat(wrqu->name, " .....", IFNAMSIZ);
 
 
 	return 0;
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
index 7294572b990..cba12b84be5 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
@@ -618,7 +618,7 @@ void ieee80211_query_seqnum(struct ieee80211_device*ieee, struct sk_buff* skb, u
 	}
 }
 
-int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
+int rtl8192_ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
 	struct ieee80211_device *ieee = netdev_priv(dev);
@@ -943,5 +943,6 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
 	return 1;
 
 }
+EXPORT_SYMBOL(rtl8192_ieee80211_xmit);
 
 EXPORT_SYMBOL(ieee80211_txb_free);
diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
index f1423d71449..70f81a8f129 100644
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -12132,6 +12132,19 @@ static void HalUsbSetQueuePipeMapping8192SUsb(struct usb_interface *intf, struct
 }
 #endif
 
+static const struct net_device_ops rtl8192_netdev_ops = {
+	.ndo_open		= rtl8192_open,
+	.ndo_stop		= rtl8192_close,
+	.ndo_get_stats		= rtl8192_stats,
+	.ndo_tx_timeout		= tx_timeout,
+	.ndo_do_ioctl		= rtl8192_ioctl,
+	.ndo_set_multicast_list	= r8192_set_multicast,
+	.ndo_set_mac_address	= r8192_set_mac_adr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_start_xmit		= rtl8192_ieee80211_xmit,
+};
+
 #if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id)
@@ -12186,15 +12199,7 @@ static void * __devinit rtl8192_usb_probe(struct usb_device *udev,
 	priv->ops = &rtl8192u_ops;
 #endif
 
-	dev->open = rtl8192_open;
-	dev->stop = rtl8192_close;
-	//dev->hard_start_xmit = rtl8192_8023_hard_start_xmit;
-	dev->tx_timeout = tx_timeout;
-	//dev->wireless_handlers = &r8192_wx_handlers_def;
-	dev->do_ioctl = rtl8192_ioctl;
-	dev->set_multicast_list = r8192_set_multicast;
-	dev->set_mac_address = r8192_set_mac_adr;
-	dev->get_stats = rtl8192_stats;
+	dev->netdev_ops = &rtl8192_netdev_ops;
 
          //DMESG("Oops: i'm coming\n");
 #if WIRELESS_EXT >= 12
diff --git a/drivers/staging/rtl8192su/r8192U_pm.c b/drivers/staging/rtl8192su/r8192U_pm.c
index 92c95aa3663..b1531a8d0cd 100644
--- a/drivers/staging/rtl8192su/r8192U_pm.c
+++ b/drivers/staging/rtl8192su/r8192U_pm.c
@@ -35,7 +35,9 @@ int rtl8192U_suspend(struct usb_interface *intf, pm_message_t state)
 		      return 0;
 		 }
 
-		dev->stop(dev);
+		if (dev->netdev_ops->ndo_stop)
+			dev->netdev_ops->ndo_stop(dev);
+
 		mdelay(10);
 
 		netif_device_detach(dev);
@@ -61,7 +63,9 @@ int rtl8192U_resume (struct usb_interface *intf)
 		}
 
 		netif_device_attach(dev);
-		dev->open(dev);
+
+		if (dev->netdev_ops->ndo_open)
+			dev->netdev_ops->ndo_open(dev);
 	}
 
         return 0;
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index 90b29b56463..0fdf8c6dc64 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -360,18 +360,18 @@ static void qt_read_bulk_callback(struct urb *urb)
 	if (port_paranoia_check(port, __func__) != 0) {
 		dbg("%s - port_paranoia_check, exiting\n", __func__);
 		qt_port->ReadBulkStopped = 1;
-		return;
+		goto exit;
 	}
 
 	if (!serial) {
 		dbg("%s - bad serial pointer, exiting\n", __func__);
-		return;
+		goto exit;
 	}
 	if (qt_port->closePending == 1) {
 		/* Were closing , stop reading */
 		dbg("%s - (qt_port->closepending == 1\n", __func__);
 		qt_port->ReadBulkStopped = 1;
-		return;
+		goto exit;
 	}
 
 	/*
@@ -381,7 +381,7 @@ static void qt_read_bulk_callback(struct urb *urb)
 	 */
 	if (qt_port->RxHolding == 1) {
 		qt_port->ReadBulkStopped = 1;
-		return;
+		goto exit;
 	}
 
 	if (urb->status) {
@@ -389,7 +389,7 @@ static void qt_read_bulk_callback(struct urb *urb)
 
 		dbg("%s - nonzero read bulk status received: %d\n",
 		    __func__, urb->status);
-		return;
+		goto exit;
 	}
 
 	if (tty && RxCount) {
@@ -463,6 +463,8 @@ static void qt_read_bulk_callback(struct urb *urb)
 	}
 
 	schedule_work(&port->work);
+exit:
+	tty_kref_put(tty);
 }
 
 /*
@@ -736,6 +738,11 @@ static int qt_startup(struct usb_serial *serial)
 		if (!qt_port) {
 			dbg("%s: kmalloc for quatech_port (%d) failed!.",
 			    __func__, i);
+			for(--i; i >= 0; i--) {
+				port = serial->port[i];
+				kfree(usb_get_serial_port_data(port));
+				usb_set_serial_port_data(port, NULL);
+			}
 			return -ENOMEM;
 		}
 		spin_lock_init(&qt_port->lock);
@@ -866,7 +873,7 @@ static void qt_release(struct usb_serial *serial)
 
 }
 
-int qt_open(struct tty_struct *tty,
+static int qt_open(struct tty_struct *tty,
 	    struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial;
@@ -1041,17 +1048,19 @@ static void qt_block_until_empty(struct tty_struct *tty,
 	}
 }
 
-static void qt_close(struct tty_struct *tty, struct usb_serial_port *port,
-		     struct file *filp)
+static void qt_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct quatech_port *qt_port;
 	struct quatech_port *port0;
+	struct tty_struct *tty;
 	int status;
 	unsigned int index;
 	status = 0;
 
 	dbg("%s - port %d\n", __func__, port->number);
+
+	tty = tty_port_tty_get(&port->port);
 	index = tty->index - serial->minor;
 
 	qt_port = qt_get_port_private(port);
@@ -1066,6 +1075,7 @@ static void qt_close(struct tty_struct *tty, struct usb_serial_port *port,
 	/* wait up to for transmitter to empty */
 	if (serial->dev)
 		qt_block_until_empty(tty, qt_port);
+	tty_kref_put(tty);
 
 	/* Close uart channel */
 	status = qt_close_channel(serial, index);
diff --git a/drivers/staging/stlc45xx/stlc45xx.c b/drivers/staging/stlc45xx/stlc45xx.c
index cfdaac9b747..a137c78fac0 100644
--- a/drivers/staging/stlc45xx/stlc45xx.c
+++ b/drivers/staging/stlc45xx/stlc45xx.c
@@ -2235,24 +2235,6 @@ static void stlc45xx_op_remove_interface(struct ieee80211_hw *hw,
 	stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
 }
 
-static int stlc45xx_op_config_interface(struct ieee80211_hw *hw,
-					struct ieee80211_vif *vif,
-					struct ieee80211_if_conf *conf)
-{
-	struct stlc45xx *stlc = hw->priv;
-
-	stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
-	mutex_lock(&stlc->mutex);
-
-	memcpy(stlc->bssid, conf->bssid, ETH_ALEN);
-	stlc45xx_tx_setup(stlc);
-
-	mutex_unlock(&stlc->mutex);
-
-	return 0;
-}
-
 static int stlc45xx_op_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct stlc45xx *stlc = hw->priv;
@@ -2295,6 +2277,14 @@ static void stlc45xx_op_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct stlc45xx *stlc = hw->priv;
 
+	stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
+	mutex_lock(&stlc->mutex);
+
+	memcpy(stlc->bssid, info->bssid, ETH_ALEN);
+	stlc45xx_tx_setup(stlc);
+
+	mutex_unlock(&stlc->mutex);
+
 	if (changed & BSS_CHANGED_ASSOC) {
 		stlc->associated = info->assoc;
 		if (info->assoc)
@@ -2357,7 +2347,6 @@ static const struct ieee80211_ops stlc45xx_ops = {
 	.add_interface = stlc45xx_op_add_interface,
 	.remove_interface = stlc45xx_op_remove_interface,
 	.config = stlc45xx_op_config,
-	.config_interface = stlc45xx_op_config_interface,
 	.configure_filter = stlc45xx_op_configure_filter,
 	.tx = stlc45xx_op_tx,
 	.bss_info_changed = stlc45xx_op_bss_info_changed,
diff --git a/drivers/staging/uc2322/Kconfig b/drivers/staging/uc2322/Kconfig
deleted file mode 100644
index 2e0c6e79df2..00000000000
--- a/drivers/staging/uc2322/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config USB_SERIAL_ATEN2011
-	tristate "ATEN 2011 USB to serial device support"
-	depends on USB_SERIAL
-	default N
-	---help---
-	  Say Y here if you want to use a ATEN 2011 dual port USB to serial
-	  adapter.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called aten2011.
diff --git a/drivers/staging/uc2322/Makefile b/drivers/staging/uc2322/Makefile
deleted file mode 100644
index 49c18d6e579..00000000000
--- a/drivers/staging/uc2322/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_USB_SERIAL_ATEN2011)	+= aten2011.o
diff --git a/drivers/staging/uc2322/TODO b/drivers/staging/uc2322/TODO
deleted file mode 100644
index c189a64c418..00000000000
--- a/drivers/staging/uc2322/TODO
+++ /dev/null
@@ -1,7 +0,0 @@
-TODO:
-	- checkpatch.pl cleanups
-	- remove dead and useless code (auditing the tty ioctls to
-	  verify that they really are correct and needed.)
-
-Please send any patches to Greg Kroah-Hartman <greg@kroah.com> and
-Russell Lang <gsview@ghostgum.com.au>.
diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c
deleted file mode 100644
index 39d0926d1a9..00000000000
--- a/drivers/staging/uc2322/aten2011.c
+++ /dev/null
@@ -1,2430 +0,0 @@
-/*
- * Aten 2011 USB serial driver for 4 port devices
- *
- * Copyright (C) 2000 Inside Out Networks
- * Copyright (C) 2001-2002, 2009 Greg Kroah-Hartman <greg@kroah.com>
- * Copyright (C) 2009 Novell Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <linux/serial.h>
-#include <linux/uaccess.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-
-#define ZLP_REG1		0x3A	/* Zero_Flag_Reg1 58 */
-#define ZLP_REG2		0x3B	/* Zero_Flag_Reg2 59 */
-#define ZLP_REG3		0x3C	/* Zero_Flag_Reg3 60 */
-#define ZLP_REG4		0x3D	/* Zero_Flag_Reg4 61 */
-#define ZLP_REG5		0x3E	/* Zero_Flag_Reg5 62 */
-
-/* Interrupt Rotinue Defines	*/
-#define SERIAL_IIR_RLS		0x06
-#define SERIAL_IIR_RDA		0x04
-#define SERIAL_IIR_CTI		0x0c
-#define SERIAL_IIR_THR		0x02
-#define SERIAL_IIR_MS		0x00
-
-/* Emulation of the bit mask on the LINE STATUS REGISTER.  */
-#define SERIAL_LSR_DR		0x0001
-#define SERIAL_LSR_OE		0x0002
-#define SERIAL_LSR_PE		0x0004
-#define SERIAL_LSR_FE		0x0008
-#define SERIAL_LSR_BI		0x0010
-#define SERIAL_LSR_THRE		0x0020
-#define SERIAL_LSR_TEMT		0x0040
-#define SERIAL_LSR_FIFOERR	0x0080
-
-/* MSR bit defines(place holders) */
-#define ATEN_MSR_DELTA_CTS	0x10
-#define ATEN_MSR_DELTA_DSR	0x20
-#define ATEN_MSR_DELTA_RI	0x40
-#define ATEN_MSR_DELTA_CD	0x80
-
-/* Serial Port register Address */
-#define RECEIVE_BUFFER_REGISTER		((__u16)(0x00))
-#define TRANSMIT_HOLDING_REGISTER	((__u16)(0x00))
-#define INTERRUPT_ENABLE_REGISTER	((__u16)(0x01))
-#define INTERRUPT_IDENT_REGISTER	((__u16)(0x02))
-#define FIFO_CONTROL_REGISTER		((__u16)(0x02))
-#define LINE_CONTROL_REGISTER		((__u16)(0x03))
-#define MODEM_CONTROL_REGISTER		((__u16)(0x04))
-#define LINE_STATUS_REGISTER		((__u16)(0x05))
-#define MODEM_STATUS_REGISTER		((__u16)(0x06))
-#define SCRATCH_PAD_REGISTER		((__u16)(0x07))
-#define DIVISOR_LATCH_LSB		((__u16)(0x00))
-#define DIVISOR_LATCH_MSB		((__u16)(0x01))
-
-#define SP1_REGISTER			((__u16)(0x00))
-#define CONTROL1_REGISTER		((__u16)(0x01))
-#define CLK_MULTI_REGISTER		((__u16)(0x02))
-#define CLK_START_VALUE_REGISTER	((__u16)(0x03))
-#define DCR1_REGISTER			((__u16)(0x04))
-#define GPIO_REGISTER			((__u16)(0x07))
-
-#define SERIAL_LCR_DLAB			((__u16)(0x0080))
-
-/*
- * URB POOL related defines
- */
-#define NUM_URBS			16	/* URB Count */
-#define URB_TRANSFER_BUFFER_SIZE	32	/* URB Size  */
-
-#define USB_VENDOR_ID_ATENINTL		0x0557
-#define ATENINTL_DEVICE_ID_2011		0x2011
-#define ATENINTL_DEVICE_ID_7820		0x7820
-
-static struct usb_device_id id_table[] = {
-	{ USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_2011) },
-	{ USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_7820) },
-	{ } /* terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-/* This structure holds all of the local port information */
-struct ATENINTL_port {
-	int		port_num;          /*Actual port number in the device(1,2,etc)*/
-	__u8		bulk_out_endpoint;   	/* the bulk out endpoint handle */
-	unsigned char	*bulk_out_buffer;     	/* buffer used for the bulk out endpoint */
-	struct urb	*write_urb;	     	/* write URB for this port */
-	__u8		bulk_in_endpoint;	/* the bulk in endpoint handle */
-	unsigned char	*bulk_in_buffer;	/* the buffer we use for the bulk in endpoint */
-	struct urb	*read_urb;	     	/* read URB for this port */
-	__u8		shadowLCR;		/* last LCR value received */
-	__u8		shadowMCR;		/* last MCR value received */
-	char		open;
-	char		chaseResponsePending;
-	wait_queue_head_t	wait_chase;		/* for handling sleeping while waiting for chase to finish */
-	wait_queue_head_t	wait_command;		/* for handling sleeping while waiting for command to finish */
-	struct async_icount	icount;
-	struct usb_serial_port	*port;			/* loop back to the owner of this object */
-	/*Offsets*/
-	__u8		SpRegOffset;
-	__u8		ControlRegOffset;
-	__u8		DcrRegOffset;
-	/* for processing control URBS in interrupt context */
-	struct urb 	*control_urb;
-	char		*ctrl_buf;
-	int		MsrLsr;
-
-	struct urb	*write_urb_pool[NUM_URBS];
-	/* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
-	struct ktermios	tmp_termios;        /* stores the old termios settings */
-	spinlock_t 	lock;                   /* private lock */
-};
-
-/* This structure holds all of the individual serial device information */
-struct ATENINTL_serial {
-	__u8		interrupt_in_endpoint;		/* the interrupt endpoint handle */
-	unsigned char	*interrupt_in_buffer;		/* the buffer we use for the interrupt endpoint */
-	struct urb	*interrupt_read_urb;	/* our interrupt urb */
-	__u8		bulk_in_endpoint;	/* the bulk in endpoint handle */
-	unsigned char	*bulk_in_buffer;		/* the buffer we use for the bulk in endpoint */
-	struct urb 	*read_urb;		/* our bulk read urb */
-	__u8		bulk_out_endpoint;	/* the bulk out endpoint handle */
-	struct usb_serial	*serial;	/* loop back to the owner of this object */
-	int	ATEN2011_spectrum_2or4ports; 	/* this says the number of ports in the device */
-	/* Indicates about the no.of opened ports of an individual USB-serial adapater. */
-	unsigned int	NoOfOpenPorts;
-	/* a flag for Status endpoint polling */
-	unsigned char	status_polling_started;
-};
-
-static void ATEN2011_set_termios(struct tty_struct *tty,
-				 struct usb_serial_port *port,
-				 struct ktermios *old_termios);
-static void ATEN2011_change_port_settings(struct tty_struct *tty,
-					  struct ATENINTL_port *ATEN2011_port,
-					  struct ktermios *old_termios);
-
-/*************************************
- * Bit definitions for each register *
- *************************************/
-#define LCR_BITS_5		0x00	/* 5 bits/char */
-#define LCR_BITS_6		0x01	/* 6 bits/char */
-#define LCR_BITS_7		0x02	/* 7 bits/char */
-#define LCR_BITS_8		0x03	/* 8 bits/char */
-#define LCR_BITS_MASK		0x03	/* Mask for bits/char field */
-
-#define LCR_STOP_1		0x00	/* 1 stop bit */
-#define LCR_STOP_1_5		0x04	/* 1.5 stop bits (if 5   bits/char) */
-#define LCR_STOP_2		0x04	/* 2 stop bits   (if 6-8 bits/char) */
-#define LCR_STOP_MASK		0x04	/* Mask for stop bits field */
-
-#define LCR_PAR_NONE		0x00	/* No parity */
-#define LCR_PAR_ODD		0x08	/* Odd parity */
-#define LCR_PAR_EVEN		0x18	/* Even parity */
-#define LCR_PAR_MARK		0x28	/* Force parity bit to 1 */
-#define LCR_PAR_SPACE		0x38	/* Force parity bit to 0 */
-#define LCR_PAR_MASK		0x38	/* Mask for parity field */
-
-#define LCR_SET_BREAK		0x40	/* Set Break condition */
-#define LCR_DL_ENABLE		0x80	/* Enable access to divisor latch */
-
-#define MCR_DTR			0x01	/* Assert DTR */
-#define MCR_RTS			0x02	/* Assert RTS */
-#define MCR_OUT1		0x04	/* Loopback only: Sets state of RI */
-#define MCR_MASTER_IE		0x08	/* Enable interrupt outputs */
-#define MCR_LOOPBACK		0x10	/* Set internal (digital) loopback mode */
-#define MCR_XON_ANY		0x20	/* Enable any char to exit XOFF mode */
-
-#define ATEN2011_MSR_CTS	0x10	/* Current state of CTS */
-#define ATEN2011_MSR_DSR	0x20	/* Current state of DSR */
-#define ATEN2011_MSR_RI		0x40	/* Current state of RI */
-#define ATEN2011_MSR_CD		0x80	/* Current state of CD */
-
-
-static int debug;
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "2.0"
-#define DRIVER_DESC "ATENINTL 2011 USB Serial Adapter"
-
-/*
- * Defines used for sending commands to port
- */
-
-#define ATEN_WDR_TIMEOUT	(50)	/* default urb timeout */
-
-/* Requests */
-#define ATEN_RD_RTYPE		0xC0
-#define ATEN_WR_RTYPE		0x40
-#define ATEN_RDREQ		0x0D
-#define ATEN_WRREQ		0x0E
-#define ATEN_CTRL_TIMEOUT	500
-#define VENDOR_READ_LENGTH	(0x01)
-
-/* set to 1 for RS485 mode and 0 for RS232 mode */
-/* FIXME make this somehow dynamic and not build time specific */
-static int RS485mode;
-
-static int set_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 val)
-{
-	struct usb_device *dev = port->serial->dev;
-	val = val & 0x00ff;
-
-	dbg("%s: is %x, value %x", __func__, reg, val);
-
-	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ,
-			       ATEN_WR_RTYPE, val, reg, NULL, 0,
-			       ATEN_WDR_TIMEOUT);
-}
-
-static int get_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 *val)
-{
-	struct usb_device *dev = port->serial->dev;
-	int ret;
-
-	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
-			      ATEN_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
-			      ATEN_WDR_TIMEOUT);
-	dbg("%s: offset is %x, return val %x", __func__, reg, *val);
-	*val = (*val) & 0x00ff;
-	return ret;
-}
-
-static int set_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 val)
-{
-	struct usb_device *dev = port->serial->dev;
-	struct ATENINTL_serial *a_serial;
-	__u16 minor;
-
-	a_serial = usb_get_serial_data(port->serial);
-	minor = port->serial->minor;
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-	val = val & 0x00ff;
-
-	/*
-	 * For the UART control registers,
-	 * the application number need to be Or'ed
-	 */
-	if (a_serial->ATEN2011_spectrum_2or4ports == 4)
-		val |= (((__u16)port->number - minor) + 1) << 8;
-	else {
-		if (((__u16) port->number - minor) == 0)
-			val |= (((__u16)port->number - minor) + 1) << 8;
-		else
-			val |= (((__u16)port->number - minor) + 2) << 8;
-	}
-	dbg("%s: application number is %x", __func__, val);
-
-	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ,
-			       ATEN_WR_RTYPE, val, reg, NULL, 0,
-			       ATEN_WDR_TIMEOUT);
-}
-
-static int get_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 *val)
-{
-	struct usb_device *dev = port->serial->dev;
-	int ret = 0;
-	__u16 wval;
-	struct ATENINTL_serial *a_serial;
-	__u16 minor = port->serial->minor;
-
-	a_serial = usb_get_serial_data(port->serial);
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-
-	/* wval is same as application number */
-	if (a_serial->ATEN2011_spectrum_2or4ports == 4)
-		wval = (((__u16)port->number - minor) + 1) << 8;
-	else {
-		if (((__u16) port->number - minor) == 0)
-			wval = (((__u16) port->number - minor) + 1) << 8;
-		else
-			wval = (((__u16) port->number - minor) + 2) << 8;
-	}
-	dbg("%s: application number is %x", __func__, wval);
-	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
-			      ATEN_RD_RTYPE, wval, reg, val, VENDOR_READ_LENGTH,
-			      ATEN_WDR_TIMEOUT);
-	*val = (*val) & 0x00ff;
-	return ret;
-}
-
-static int handle_newMsr(struct ATENINTL_port *port, __u8 newMsr)
-{
-	struct ATENINTL_port *ATEN2011_port;
-	struct async_icount *icount;
-	ATEN2011_port = port;
-	icount = &ATEN2011_port->icount;
-	if (newMsr &
-	    (ATEN_MSR_DELTA_CTS | ATEN_MSR_DELTA_DSR | ATEN_MSR_DELTA_RI |
-	     ATEN_MSR_DELTA_CD)) {
-		icount = &ATEN2011_port->icount;
-
-		/* update input line counters */
-		if (newMsr & ATEN_MSR_DELTA_CTS)
-			icount->cts++;
-		if (newMsr & ATEN_MSR_DELTA_DSR)
-			icount->dsr++;
-		if (newMsr & ATEN_MSR_DELTA_CD)
-			icount->dcd++;
-		if (newMsr & ATEN_MSR_DELTA_RI)
-			icount->rng++;
-	}
-
-	return 0;
-}
-
-static int handle_newLsr(struct ATENINTL_port *port, __u8 newLsr)
-{
-	struct async_icount *icount;
-
-	dbg("%s - %02x", __func__, newLsr);
-
-	if (newLsr & SERIAL_LSR_BI) {
-		/*
-		 * Parity and Framing errors only count if they occur exclusive
-		 * of a break being received.
-		 */
-		newLsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI);
-	}
-
-	/* update input line counters */
-	icount = &port->icount;
-	if (newLsr & SERIAL_LSR_BI)
-		icount->brk++;
-	if (newLsr & SERIAL_LSR_OE)
-		icount->overrun++;
-	if (newLsr & SERIAL_LSR_PE)
-		icount->parity++;
-	if (newLsr & SERIAL_LSR_FE)
-		icount->frame++;
-
-	return 0;
-}
-
-static void ATEN2011_control_callback(struct urb *urb)
-{
-	unsigned char *data;
-	struct ATENINTL_port *ATEN2011_port;
-	__u8 regval = 0x0;
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-		    urb->status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d", __func__,
-		    urb->status);
-		goto exit;
-	}
-
-	ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
-	dbg("%s urb buffer size is %d", __func__, urb->actual_length);
-	dbg("%s ATEN2011_port->MsrLsr is %d port %d", __func__,
-		ATEN2011_port->MsrLsr, ATEN2011_port->port_num);
-	data = urb->transfer_buffer;
-	regval = (__u8) data[0];
-	dbg("%s data is %x", __func__, regval);
-	if (ATEN2011_port->MsrLsr == 0)
-		handle_newMsr(ATEN2011_port, regval);
-	else if (ATEN2011_port->MsrLsr == 1)
-		handle_newLsr(ATEN2011_port, regval);
-
-exit:
-	return;
-}
-
-static int ATEN2011_get_reg(struct ATENINTL_port *ATEN, __u16 Wval, __u16 reg,
-			    __u16 *val)
-{
-	struct usb_device *dev = ATEN->port->serial->dev;
-	struct usb_ctrlrequest *dr = NULL;
-	unsigned char *buffer = NULL;
-	int ret = 0;
-	buffer = (__u8 *) ATEN->ctrl_buf;
-
-	dr = (void *)(buffer + 2);
-	dr->bRequestType = ATEN_RD_RTYPE;
-	dr->bRequest = ATEN_RDREQ;
-	dr->wValue = cpu_to_le16(Wval);
-	dr->wIndex = cpu_to_le16(reg);
-	dr->wLength = cpu_to_le16(2);
-
-	usb_fill_control_urb(ATEN->control_urb, dev, usb_rcvctrlpipe(dev, 0),
-			     (unsigned char *)dr, buffer, 2,
-			     ATEN2011_control_callback, ATEN);
-	ATEN->control_urb->transfer_buffer_length = 2;
-	ret = usb_submit_urb(ATEN->control_urb, GFP_ATOMIC);
-	return ret;
-}
-
-static void ATEN2011_interrupt_callback(struct urb *urb)
-{
-	int result;
-	int length;
-	struct ATENINTL_port *ATEN2011_port;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct usb_serial *serial;
-	__u16 Data;
-	unsigned char *data;
-	__u8 sp[5], st;
-	int i;
-	__u16 wval;
-	int minor;
-
-	dbg("%s", " : Entering");
-
-	ATEN2011_serial = (struct ATENINTL_serial *)urb->context;
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-		    urb->status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d", __func__,
-		    urb->status);
-		goto exit;
-	}
-	length = urb->actual_length;
-	data = urb->transfer_buffer;
-
-	serial = ATEN2011_serial->serial;
-
-	/* ATENINTL get 5 bytes
-	 * Byte 1 IIR Port 1 (port.number is 0)
-	 * Byte 2 IIR Port 2 (port.number is 1)
-	 * Byte 3 IIR Port 3 (port.number is 2)
-	 * Byte 4 IIR Port 4 (port.number is 3)
-	 * Byte 5 FIFO status for both */
-
-	if (length && length > 5) {
-		dbg("%s", "Wrong data !!!");
-		return;
-	}
-
-	/* MATRIX */
-	if (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 4) {
-		sp[0] = (__u8) data[0];
-		sp[1] = (__u8) data[1];
-		sp[2] = (__u8) data[2];
-		sp[3] = (__u8) data[3];
-		st = (__u8) data[4];
-	} else {
-		sp[0] = (__u8) data[0];
-		sp[1] = (__u8) data[2];
-		/* sp[2]=(__u8)data[2]; */
-		/* sp[3]=(__u8)data[3]; */
-		st = (__u8) data[4];
-
-	}
-	for (i = 0; i < serial->num_ports; i++) {
-		ATEN2011_port = usb_get_serial_port_data(serial->port[i]);
-		minor = serial->minor;
-		if (minor == SERIAL_TTY_NO_MINOR)
-			minor = 0;
-		if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
-		    && (i != 0))
-			wval =
-			    (((__u16) serial->port[i]->number -
-			      (__u16) (minor)) + 2) << 8;
-		else
-			wval =
-			    (((__u16) serial->port[i]->number -
-			      (__u16) (minor)) + 1) << 8;
-		if (ATEN2011_port->open != 0) {
-			if (sp[i] & 0x01) {
-				dbg("SP%d No Interrupt !!!", i);
-			} else {
-				switch (sp[i] & 0x0f) {
-				case SERIAL_IIR_RLS:
-					dbg("Serial Port %d: Receiver status error or address bit detected in 9-bit mode", i);
-					ATEN2011_port->MsrLsr = 1;
-					ATEN2011_get_reg(ATEN2011_port, wval,
-							 LINE_STATUS_REGISTER,
-							 &Data);
-					break;
-				case SERIAL_IIR_MS:
-					dbg("Serial Port %d: Modem status change", i);
-					ATEN2011_port->MsrLsr = 0;
-					ATEN2011_get_reg(ATEN2011_port, wval,
-							 MODEM_STATUS_REGISTER,
-							 &Data);
-					break;
-				}
-			}
-		}
-
-	}
-exit:
-	if (ATEN2011_serial->status_polling_started == 0)
-		return;
-
-	result = usb_submit_urb(urb, GFP_ATOMIC);
-	if (result) {
-		dev_err(&urb->dev->dev,
-			"%s - Error %d submitting interrupt urb\n",
-			__func__, result);
-	}
-
-	return;
-}
-
-static void ATEN2011_bulk_in_callback(struct urb *urb)
-{
-	int status;
-	unsigned char *data;
-	struct usb_serial *serial;
-	struct usb_serial_port *port;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-	struct tty_struct *tty;
-
-	if (urb->status) {
-		dbg("nonzero read bulk status received: %d", urb->status);
-		return;
-	}
-
-	ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
-	port = (struct usb_serial_port *)ATEN2011_port->port;
-	serial = port->serial;
-
-	dbg("%s", "Entering...");
-
-	data = urb->transfer_buffer;
-	ATEN2011_serial = usb_get_serial_data(serial);
-
-	if (urb->actual_length) {
-		tty = tty_port_tty_get(&ATEN2011_port->port->port);
-		if (tty) {
-			tty_buffer_request_room(tty, urb->actual_length);
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
-			tty_kref_put(tty);
-		}
-
-		ATEN2011_port->icount.rx += urb->actual_length;
-		dbg("ATEN2011_port->icount.rx is %d:",
-			ATEN2011_port->icount.rx);
-	}
-
-	if (!ATEN2011_port->read_urb) {
-		dbg("%s", "URB KILLED !!!");
-		return;
-	}
-
-	if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
-		ATEN2011_port->read_urb->dev = serial->dev;
-
-		status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
-		if (status)
-			dbg("usb_submit_urb(read bulk) failed, status = %d", status);
-	}
-}
-
-static void ATEN2011_bulk_out_data_callback(struct urb *urb)
-{
-	struct ATENINTL_port *ATEN2011_port;
-	struct tty_struct *tty;
-
-	if (urb->status) {
-		dbg("nonzero write bulk status received:%d", urb->status);
-		return;
-	}
-
-	ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
-	dbg("%s", "Entering .........");
-
-	tty = tty_port_tty_get(&ATEN2011_port->port->port);
-
-	if (tty && ATEN2011_port->open)
-		/* tell the tty driver that something has changed */
-		tty_wakeup(tty);
-
-	/* schedule_work(&ATEN2011_port->port->work); */
-	tty_kref_put(tty);
-
-}
-
-#ifdef ATENSerialProbe
-static int ATEN2011_serial_probe(struct usb_serial *serial,
-				 const struct usb_device_id *id)
-{
-
-	/*need to implement the mode_reg reading and updating\
-	   structures usb_serial_ device_type\
-	   (i.e num_ports, num_bulkin,bulkout etc) */
-	/* Also we can update the changes  attach */
-	return 1;
-}
-#endif
-
-static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port,
-			 struct file *filp)
-{
-	int response;
-	int j;
-	struct usb_serial *serial;
-	struct urb *urb;
-	__u16 Data;
-	int status;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-	struct ktermios tmp_termios;
-	int minor;
-
-	serial = port->serial;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return -ENODEV;
-
-	ATEN2011_serial = usb_get_serial_data(serial);
-	if (ATEN2011_serial == NULL)
-		return -ENODEV;
-
-	/* increment the number of opened ports counter here */
-	ATEN2011_serial->NoOfOpenPorts++;
-
-	usb_clear_halt(serial->dev, port->write_urb->pipe);
-	usb_clear_halt(serial->dev, port->read_urb->pipe);
-
-	/* Initialising the write urb pool */
-	for (j = 0; j < NUM_URBS; ++j) {
-		urb = usb_alloc_urb(0, GFP_ATOMIC);
-		ATEN2011_port->write_urb_pool[j] = urb;
-
-		if (urb == NULL) {
-			err("No more urbs???");
-			continue;
-		}
-
-		urb->transfer_buffer = NULL;
-		urb->transfer_buffer =
-		    kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
-		if (!urb->transfer_buffer) {
-			err("%s-out of memory for urb buffers.", __func__);
-			continue;
-		}
-	}
-
-/*****************************************************************************
- * Initialize ATEN2011 -- Write Init values to corresponding Registers
- *
- * Register Index
- * 1 : IER
- * 2 : FCR
- * 3 : LCR
- * 4 : MCR
- *
- * 0x08 : SP1/2 Control Reg
- *****************************************************************************/
-
-/* NEED to check the fallowing Block */
-
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
-	if (status < 0) {
-		dbg("Reading Spreg failed");
-		return -1;
-	}
-	Data |= 0x80;
-	status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-	if (status < 0) {
-		dbg("writing Spreg failed");
-		return -1;
-	}
-
-	Data &= ~0x80;
-	status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-	if (status < 0) {
-		dbg("writing Spreg failed");
-		return -1;
-	}
-
-/* End of block to be checked */
-/**************************CHECK***************************/
-
-	if (RS485mode == 0)
-		Data = 0xC0;
-	else
-		Data = 0x00;
-	status = set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
-	if (status < 0) {
-		dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x", status);
-		return -1;
-	} else
-		dbg("SCRATCH_PAD_REGISTER Writing success status%d", status);
-
-/**************************CHECK***************************/
-
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
-	if (status < 0) {
-		dbg("Reading Controlreg failed");
-		return -1;
-	}
-	Data |= 0x08;		/* Driver done bit */
-	Data |= 0x20;		/* rx_disable */
-	status = 0;
-	status =
-	    set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-	if (status < 0) {
-		dbg("writing Controlreg failed");
-		return -1;
-	}
-	/*
-	 * do register settings here
-	 * Set all regs to the device default values.
-	 * First Disable all interrupts.
-	 */
-
-	Data = 0x00;
-	status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-	if (status < 0) {
-		dbg("disableing interrupts failed");
-		return -1;
-	}
-	/* Set FIFO_CONTROL_REGISTER to the default value */
-	Data = 0x00;
-	status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-	if (status < 0) {
-		dbg("Writing FIFO_CONTROL_REGISTER  failed");
-		return -1;
-	}
-
-	Data = 0xcf;		/* chk */
-	status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-	if (status < 0) {
-		dbg("Writing FIFO_CONTROL_REGISTER  failed");
-		return -1;
-	}
-
-	Data = 0x03;		/* LCR_BITS_8 */
-	status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-	ATEN2011_port->shadowLCR = Data;
-
-	Data = 0x0b;		/* MCR_DTR|MCR_RTS|MCR_MASTER_IE */
-	status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	ATEN2011_port->shadowMCR = Data;
-
-#ifdef Check
-	Data = 0x00;
-	status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
-	ATEN2011_port->shadowLCR = Data;
-
-	Data |= SERIAL_LCR_DLAB;	/* data latch enable in LCR 0x80 */
-	status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-	Data = 0x0c;
-	status = set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
-
-	Data = 0x0;
-	status = set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
-
-	Data = 0x00;
-	status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
-
-/*      Data = ATEN2011_port->shadowLCR; */	/* data latch disable */
-	Data = Data & ~SERIAL_LCR_DLAB;
-	status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-	ATEN2011_port->shadowLCR = Data;
-#endif
-	/* clearing Bulkin and Bulkout Fifo */
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
-
-	Data = Data | 0x0c;
-	status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-
-	Data = Data & ~0x0c;
-	status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-	/* Finally enable all interrupts */
-	Data = 0x0;
-	Data = 0x0c;
-	status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-	/* clearing rx_disable */
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
-	Data = Data & ~0x20;
-	status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-
-	/* rx_negate */
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
-	Data = Data | 0x10;
-	status = 0;
-	status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-
-	/*
-	 * Check to see if we've set up our endpoint info yet
-	 * (can't set it up in ATEN2011_startup as the structures
-	 * were not set up at that time.)
-	 */
-	if (ATEN2011_serial->NoOfOpenPorts == 1) {
-		/* start the status polling here */
-		ATEN2011_serial->status_polling_started = 1;
-		/* If not yet set, Set here */
-		ATEN2011_serial->interrupt_in_buffer =
-		    serial->port[0]->interrupt_in_buffer;
-		ATEN2011_serial->interrupt_in_endpoint =
-		    serial->port[0]->interrupt_in_endpointAddress;
-		ATEN2011_serial->interrupt_read_urb =
-		    serial->port[0]->interrupt_in_urb;
-
-		/* set up interrupt urb */
-		usb_fill_int_urb(ATEN2011_serial->interrupt_read_urb,
-				 serial->dev,
-				 usb_rcvintpipe(serial->dev,
-						ATEN2011_serial->
-						interrupt_in_endpoint),
-				 ATEN2011_serial->interrupt_in_buffer,
-				 ATEN2011_serial->interrupt_read_urb->
-				 transfer_buffer_length,
-				 ATEN2011_interrupt_callback, ATEN2011_serial,
-				 ATEN2011_serial->interrupt_read_urb->interval);
-
-		/* start interrupt read for ATEN2011               *
-		 * will continue as long as ATEN2011 is connected  */
-
-		response =
-		    usb_submit_urb(ATEN2011_serial->interrupt_read_urb,
-				   GFP_KERNEL);
-		if (response) {
-			dbg("%s - Error %d submitting interrupt urb",
-				__func__, response);
-		}
-
-	}
-
-	/*
-	 * See if we've set up our endpoint info yet
-	 * (can't set it up in ATEN2011_startup as the
-	 * structures were not set up at that time.)
-	 */
-
-	dbg("port number is %d", port->number);
-	dbg("serial number is %d", port->serial->minor);
-	dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress);
-	dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress);
-	dbg("Interrupt endpoint is %d",
-		port->interrupt_in_endpointAddress);
-	dbg("port's number in the device is %d", ATEN2011_port->port_num);
-	ATEN2011_port->bulk_in_buffer = port->bulk_in_buffer;
-	ATEN2011_port->bulk_in_endpoint = port->bulk_in_endpointAddress;
-	ATEN2011_port->read_urb = port->read_urb;
-	ATEN2011_port->bulk_out_endpoint = port->bulk_out_endpointAddress;
-
-	minor = port->serial->minor;
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-
-	/* set up our bulk in urb */
-	if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
-	    && (((__u16) port->number - (__u16) (minor)) != 0)) {
-		usb_fill_bulk_urb(ATEN2011_port->read_urb, serial->dev,
-				  usb_rcvbulkpipe(serial->dev,
-						  (port->
-						   bulk_in_endpointAddress +
-						   2)), port->bulk_in_buffer,
-				  ATEN2011_port->read_urb->
-				  transfer_buffer_length,
-				  ATEN2011_bulk_in_callback, ATEN2011_port);
-	} else
-		usb_fill_bulk_urb(ATEN2011_port->read_urb,
-				  serial->dev,
-				  usb_rcvbulkpipe(serial->dev,
-						  port->
-						  bulk_in_endpointAddress),
-				  port->bulk_in_buffer,
-				  ATEN2011_port->read_urb->
-				  transfer_buffer_length,
-				  ATEN2011_bulk_in_callback, ATEN2011_port);
-
-	dbg("ATEN2011_open: bulkin endpoint is %d",
-		port->bulk_in_endpointAddress);
-	response = usb_submit_urb(ATEN2011_port->read_urb, GFP_KERNEL);
-	if (response) {
-		err("%s - Error %d submitting control urb", __func__,
-		    response);
-	}
-
-	/* initialize our wait queues */
-	init_waitqueue_head(&ATEN2011_port->wait_chase);
-	init_waitqueue_head(&ATEN2011_port->wait_command);
-
-	/* initialize our icount structure */
-	memset(&(ATEN2011_port->icount), 0x00, sizeof(ATEN2011_port->icount));
-
-	/* initialize our port settings */
-	ATEN2011_port->shadowMCR = MCR_MASTER_IE;	/* Must set to enable ints! */
-	ATEN2011_port->chaseResponsePending = 0;
-	/* send a open port command */
-	ATEN2011_port->open = 1;
-	/* ATEN2011_change_port_settings(ATEN2011_port,old_termios); */
-	/* Setup termios */
-	ATEN2011_set_termios(tty, port, &tmp_termios);
-	ATEN2011_port->icount.tx = 0;
-	ATEN2011_port->icount.rx = 0;
-
-	dbg("usb_serial serial:%x       ATEN2011_port:%x\nATEN2011_serial:%x      usb_serial_port port:%x",
-	     (unsigned int)serial, (unsigned int)ATEN2011_port,
-	     (unsigned int)ATEN2011_serial, (unsigned int)port);
-
-	return 0;
-
-}
-
-static int ATEN2011_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int i;
-	int chars = 0;
-	struct ATENINTL_port *ATEN2011_port;
-
-	/* dbg("%s"," ATEN2011_chars_in_buffer:entering ..........."); */
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-	if (ATEN2011_port == NULL) {
-		dbg("%s", "ATEN2011_break:leaving ...........");
-		return -1;
-	}
-
-	for (i = 0; i < NUM_URBS; ++i)
-		if (ATEN2011_port->write_urb_pool[i]->status == -EINPROGRESS)
-			chars += URB_TRANSFER_BUFFER_SIZE;
-
-	dbg("%s - returns %d", __func__, chars);
-	return chars;
-
-}
-
-static void ATEN2011_block_until_tx_empty(struct tty_struct *tty,
-					  struct ATENINTL_port *ATEN2011_port)
-{
-	int timeout = HZ / 10;
-	int wait = 30;
-	int count;
-
-	while (1) {
-		count = ATEN2011_chars_in_buffer(tty);
-
-		/* Check for Buffer status */
-		if (count <= 0)
-			return;
-
-		/* Block the thread for a while */
-		interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase,
-					       timeout);
-
-		/* No activity.. count down section */
-		wait--;
-		if (wait == 0) {
-			dbg("%s - TIMEOUT", __func__);
-			return;
-		} else {
-			/* Reset timout value back to seconds */
-			wait = 30;
-		}
-	}
-}
-
-static void ATEN2011_close(struct tty_struct *tty, struct usb_serial_port *port,
-			   struct file *filp)
-{
-	struct usb_serial *serial;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-	int no_urbs;
-	__u16 Data;
-
-	dbg("%s", "ATEN2011_close:entering...");
-	serial = port->serial;
-
-	/* take the Adpater and port's private data */
-	ATEN2011_serial = usb_get_serial_data(serial);
-	ATEN2011_port = usb_get_serial_port_data(port);
-	if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL))
-		return;
-
-	if (serial->dev) {
-		/* flush and block(wait) until tx is empty */
-		ATEN2011_block_until_tx_empty(tty, ATEN2011_port);
-	}
-	/* kill the ports URB's */
-	for (no_urbs = 0; no_urbs < NUM_URBS; no_urbs++)
-		usb_kill_urb(ATEN2011_port->write_urb_pool[no_urbs]);
-	/* Freeing Write URBs */
-	for (no_urbs = 0; no_urbs < NUM_URBS; ++no_urbs) {
-		kfree(ATEN2011_port->write_urb_pool[no_urbs]->transfer_buffer);
-		usb_free_urb(ATEN2011_port->write_urb_pool[no_urbs]);
-	}
-	/* While closing port, shutdown all bulk read, write  *
-	 * and interrupt read if they exists                  */
-	if (serial->dev) {
-		if (ATEN2011_port->write_urb) {
-			dbg("%s", "Shutdown bulk write");
-			usb_kill_urb(ATEN2011_port->write_urb);
-		}
-		if (ATEN2011_port->read_urb) {
-			dbg("%s", "Shutdown bulk read");
-			usb_kill_urb(ATEN2011_port->read_urb);
-		}
-		if ((&ATEN2011_port->control_urb)) {
-			dbg("%s", "Shutdown control read");
-			/* usb_kill_urb (ATEN2011_port->control_urb); */
-
-		}
-	}
-	/* if(ATEN2011_port->ctrl_buf != NULL) */
-		/* kfree(ATEN2011_port->ctrl_buf); */
-	/* decrement the no.of open ports counter of an individual USB-serial adapter. */
-	ATEN2011_serial->NoOfOpenPorts--;
-	dbg("NoOfOpenPorts in close%d:in port%d",
-		ATEN2011_serial->NoOfOpenPorts, port->number);
-	if (ATEN2011_serial->NoOfOpenPorts == 0) {
-		/* stop the stus polling here */
-		ATEN2011_serial->status_polling_started = 0;
-		if (ATEN2011_serial->interrupt_read_urb) {
-			dbg("%s", "Shutdown interrupt_read_urb");
-			/* ATEN2011_serial->interrupt_in_buffer=NULL; */
-			/* usb_kill_urb (ATEN2011_serial->interrupt_read_urb); */
-		}
-	}
-	if (ATEN2011_port->write_urb) {
-		/* if this urb had a transfer buffer already (old tx) free it */
-		kfree(ATEN2011_port->write_urb->transfer_buffer);
-		usb_free_urb(ATEN2011_port->write_urb);
-	}
-
-	/* clear the MCR & IER */
-	Data = 0x00;
-	set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	Data = 0x00;
-	set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-	ATEN2011_port->open = 0;
-	dbg("%s", "Leaving ............");
-
-}
-
-static void ATEN2011_block_until_chase_response(struct tty_struct *tty,
-						struct ATENINTL_port
-						*ATEN2011_port)
-{
-	int timeout = 1 * HZ;
-	int wait = 10;
-	int count;
-
-	while (1) {
-		count = ATEN2011_chars_in_buffer(tty);
-
-		/* Check for Buffer status */
-		if (count <= 0) {
-			ATEN2011_port->chaseResponsePending = 0;
-			return;
-		}
-
-		/* Block the thread for a while */
-		interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase,
-					       timeout);
-		/* No activity.. count down section */
-		wait--;
-		if (wait == 0) {
-			dbg("%s - TIMEOUT", __func__);
-			return;
-		} else {
-			/* Reset timout value back to seconds */
-			wait = 10;
-		}
-	}
-
-}
-
-static void ATEN2011_break(struct tty_struct *tty, int break_state)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned char data;
-	struct usb_serial *serial;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-
-	dbg("%s", "Entering ...........");
-	dbg("ATEN2011_break: Start");
-
-	serial = port->serial;
-
-	ATEN2011_serial = usb_get_serial_data(serial);
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL))
-		return;
-
-	/* flush and chase */
-	ATEN2011_port->chaseResponsePending = 1;
-
-	if (serial->dev) {
-		/* flush and block until tx is empty */
-		ATEN2011_block_until_chase_response(tty, ATEN2011_port);
-	}
-
-	if (break_state == -1)
-		data = ATEN2011_port->shadowLCR | LCR_SET_BREAK;
-	else
-		data = ATEN2011_port->shadowLCR & ~LCR_SET_BREAK;
-
-	ATEN2011_port->shadowLCR = data;
-	dbg("ATEN2011_break ATEN2011_port->shadowLCR is %x",
-		ATEN2011_port->shadowLCR);
-	set_uart_reg(port, LINE_CONTROL_REGISTER, ATEN2011_port->shadowLCR);
-
-	return;
-}
-
-static int ATEN2011_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int i;
-	int room = 0;
-	struct ATENINTL_port *ATEN2011_port;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-	if (ATEN2011_port == NULL) {
-		dbg("%s", "ATEN2011_break:leaving ...........");
-		return -1;
-	}
-
-	for (i = 0; i < NUM_URBS; ++i)
-		if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS)
-			room += URB_TRANSFER_BUFFER_SIZE;
-
-	dbg("%s - returns %d", __func__, room);
-	return room;
-
-}
-
-static int ATEN2011_write(struct tty_struct *tty, struct usb_serial_port *port,
-			  const unsigned char *data, int count)
-{
-	int status;
-	int i;
-	int bytes_sent = 0;
-	int transfer_size;
-	int minor;
-
-	struct ATENINTL_port *ATEN2011_port;
-	struct usb_serial *serial;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct urb *urb;
-	const unsigned char *current_position = data;
-	unsigned char *data1;
-	dbg("%s", "entering ...........");
-
-	serial = port->serial;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-	if (ATEN2011_port == NULL) {
-		dbg("%s", "ATEN2011_port is NULL");
-		return -1;
-	}
-
-	ATEN2011_serial = usb_get_serial_data(serial);
-	if (ATEN2011_serial == NULL) {
-		dbg("%s", "ATEN2011_serial is NULL");
-		return -1;
-	}
-
-	/* try to find a free urb in the list */
-	urb = NULL;
-
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS) {
-			urb = ATEN2011_port->write_urb_pool[i];
-			dbg("URB:%d", i);
-			break;
-		}
-	}
-
-	if (urb == NULL) {
-		dbg("%s - no more free urbs", __func__);
-		goto exit;
-	}
-
-	if (urb->transfer_buffer == NULL) {
-		urb->transfer_buffer =
-		    kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
-
-		if (urb->transfer_buffer == NULL) {
-			err("%s no more kernel memory...", __func__);
-			goto exit;
-		}
-	}
-	transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
-
-	memcpy(urb->transfer_buffer, current_position, transfer_size);
-	/* usb_serial_debug_data (__FILE__, __func__, transfer_size, urb->transfer_buffer); */
-
-	/* fill urb with data and submit  */
-	minor = port->serial->minor;
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-	if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
-	    && (((__u16) port->number - (__u16) (minor)) != 0)) {
-		usb_fill_bulk_urb(urb, ATEN2011_serial->serial->dev,
-				  usb_sndbulkpipe(ATEN2011_serial->serial->dev,
-						  (port->
-						   bulk_out_endpointAddress) +
-						  2), urb->transfer_buffer,
-				  transfer_size,
-				  ATEN2011_bulk_out_data_callback,
-				  ATEN2011_port);
-	} else
-
-		usb_fill_bulk_urb(urb,
-				  ATEN2011_serial->serial->dev,
-				  usb_sndbulkpipe(ATEN2011_serial->serial->dev,
-						  port->
-						  bulk_out_endpointAddress),
-				  urb->transfer_buffer, transfer_size,
-				  ATEN2011_bulk_out_data_callback,
-				  ATEN2011_port);
-
-	data1 = urb->transfer_buffer;
-	dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
-	/* for(i=0;i < urb->actual_length;i++) */
-		/* dbg("Data is %c ",data1[i]); */
-
-	/* send it down the pipe */
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-
-	if (status) {
-		err("%s - usb_submit_urb(write bulk) failed with status = %d",
-		    __func__, status);
-		bytes_sent = status;
-		goto exit;
-	}
-	bytes_sent = transfer_size;
-	ATEN2011_port->icount.tx += transfer_size;
-	dbg("ATEN2011_port->icount.tx is %d:", ATEN2011_port->icount.tx);
-
-exit:
-	return bytes_sent;
-}
-
-static void ATEN2011_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ATENINTL_port *ATEN2011_port;
-	int status;
-
-	dbg("- port %d", port->number);
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return;
-
-	if (!ATEN2011_port->open) {
-		dbg("%s", "port not opened");
-		return;
-	}
-
-	dbg("%s", "Entering .......... ");
-
-	if (!tty) {
-		dbg("%s - no tty available", __func__);
-		return;
-	}
-
-	/* if we are implementing XON/XOFF, send the stop character */
-	if (I_IXOFF(tty)) {
-		unsigned char stop_char = STOP_CHAR(tty);
-		status = ATEN2011_write(tty, port, &stop_char, 1);
-		if (status <= 0)
-			return;
-	}
-
-	/* if we are implementing RTS/CTS, toggle that line */
-	if (tty->termios->c_cflag & CRTSCTS) {
-		ATEN2011_port->shadowMCR &= ~MCR_RTS;
-		status = set_uart_reg(port, MODEM_CONTROL_REGISTER,
-				      ATEN2011_port->shadowMCR);
-		if (status < 0)
-			return;
-	}
-
-	return;
-}
-
-static void ATEN2011_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int status;
-	struct ATENINTL_port *ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return;
-
-	if (!ATEN2011_port->open) {
-		dbg("%s - port not opened", __func__);
-		return;
-	}
-
-	dbg("%s", "Entering .......... ");
-
-	if (!tty) {
-		dbg("%s - no tty available", __func__);
-		return;
-	}
-
-	/* if we are implementing XON/XOFF, send the start character */
-	if (I_IXOFF(tty)) {
-		unsigned char start_char = START_CHAR(tty);
-		status = ATEN2011_write(tty, port, &start_char, 1);
-		if (status <= 0)
-			return;
-	}
-
-	/* if we are implementing RTS/CTS, toggle that line */
-	if (tty->termios->c_cflag & CRTSCTS) {
-		ATEN2011_port->shadowMCR |= MCR_RTS;
-		status = set_uart_reg(port, MODEM_CONTROL_REGISTER,
-				      ATEN2011_port->shadowMCR);
-		if (status < 0)
-			return;
-	}
-
-	return;
-}
-
-static int ATEN2011_tiocmget(struct tty_struct *tty, struct file *file)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ATENINTL_port *ATEN2011_port;
-	unsigned int result;
-	__u16 msr;
-	__u16 mcr;
-	/* unsigned int mcr; */
-	int status = 0;
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (ATEN2011_port == NULL)
-		return -ENODEV;
-
-	status = get_uart_reg(port, MODEM_STATUS_REGISTER, &msr);
-	status = get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr);
-	/* mcr = ATEN2011_port->shadowMCR; */
-	/* COMMENT2: the Fallowing three line are commented for updating only MSR values */
-	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
-	    | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
-	    | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0)
-	    | ((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0)
-	    | ((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0)
-	    | ((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0)
-	    | ((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0);
-
-	dbg("%s - 0x%04X", __func__, result);
-
-	return result;
-}
-
-static int ATEN2011_tiocmset(struct tty_struct *tty, struct file *file,
-			     unsigned int set, unsigned int clear)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ATENINTL_port *ATEN2011_port;
-	unsigned int mcr;
-	unsigned int status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return -ENODEV;
-
-	mcr = ATEN2011_port->shadowMCR;
-	if (clear & TIOCM_RTS)
-		mcr &= ~MCR_RTS;
-	if (clear & TIOCM_DTR)
-		mcr &= ~MCR_DTR;
-	if (clear & TIOCM_LOOP)
-		mcr &= ~MCR_LOOPBACK;
-
-	if (set & TIOCM_RTS)
-		mcr |= MCR_RTS;
-	if (set & TIOCM_DTR)
-		mcr |= MCR_DTR;
-	if (set & TIOCM_LOOP)
-		mcr |= MCR_LOOPBACK;
-
-	ATEN2011_port->shadowMCR = mcr;
-
-	status = set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
-	if (status < 0) {
-		dbg("setting MODEM_CONTROL_REGISTER Failed");
-		return -1;
-	}
-
-	return 0;
-}
-
-static void ATEN2011_set_termios(struct tty_struct *tty,
-				 struct usb_serial_port *port,
-				 struct ktermios *old_termios)
-{
-	int status;
-	unsigned int cflag;
-	struct usb_serial *serial;
-	struct ATENINTL_port *ATEN2011_port;
-
-	dbg("ATEN2011_set_termios: START");
-
-	serial = port->serial;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return;
-
-	if (!ATEN2011_port->open) {
-		dbg("%s - port not opened", __func__);
-		return;
-	}
-
-	dbg("%s", "setting termios - ");
-
-	cflag = tty->termios->c_cflag;
-
-	dbg("%s - cflag %08x iflag %08x", __func__,
-	    tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
-
-	if (old_termios) {
-		dbg("%s - old clfag %08x old iflag %08x", __func__,
-		    old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
-	}
-
-	dbg("%s - port %d", __func__, port->number);
-
-	/* change the port settings to the new ones specified */
-
-	ATEN2011_change_port_settings(tty, ATEN2011_port, old_termios);
-
-	if (!ATEN2011_port->read_urb) {
-		dbg("%s", "URB KILLED !!!!!");
-		return;
-	}
-
-	if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
-		ATEN2011_port->read_urb->dev = serial->dev;
-		status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
-		if (status) {
-			dbg
-			    (" usb_submit_urb(read bulk) failed, status = %d",
-			     status);
-		}
-	}
-	return;
-}
-
-static int get_lsr_info(struct tty_struct *tty,
-			struct ATENINTL_port *ATEN2011_port,
-			unsigned int __user *value)
-{
-	int count;
-	unsigned int result = 0;
-
-	count = ATEN2011_chars_in_buffer(tty);
-	if (count == 0) {
-		dbg("%s -- Empty", __func__);
-		result = TIOCSER_TEMT;
-	}
-
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	return 0;
-}
-
-static int get_number_bytes_avail(struct tty_struct *tty,
-				  struct ATENINTL_port *ATEN2011_port,
-				  unsigned int __user *value)
-{
-	unsigned int result = 0;
-
-	if (!tty)
-		return -ENOIOCTLCMD;
-
-	result = tty->read_cnt;
-
-	dbg("%s(%d) = %d", __func__, ATEN2011_port->port->number, result);
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-
-	return -ENOIOCTLCMD;
-}
-
-static int set_modem_info(struct ATENINTL_port *ATEN2011_port, unsigned int cmd,
-			  unsigned int __user *value)
-{
-	unsigned int mcr;
-	unsigned int arg;
-	__u16 Data;
-	int status;
-	struct usb_serial_port *port;
-
-	if (ATEN2011_port == NULL)
-		return -1;
-
-	port = (struct usb_serial_port *)ATEN2011_port->port;
-
-	mcr = ATEN2011_port->shadowMCR;
-
-	if (copy_from_user(&arg, value, sizeof(int)))
-		return -EFAULT;
-
-	switch (cmd) {
-	case TIOCMBIS:
-		if (arg & TIOCM_RTS)
-			mcr |= MCR_RTS;
-		if (arg & TIOCM_DTR)
-			mcr |= MCR_RTS;
-		if (arg & TIOCM_LOOP)
-			mcr |= MCR_LOOPBACK;
-		break;
-
-	case TIOCMBIC:
-		if (arg & TIOCM_RTS)
-			mcr &= ~MCR_RTS;
-		if (arg & TIOCM_DTR)
-			mcr &= ~MCR_RTS;
-		if (arg & TIOCM_LOOP)
-			mcr &= ~MCR_LOOPBACK;
-		break;
-
-	case TIOCMSET:
-		/* turn off the RTS and DTR and LOOPBACK
-		 * and then only turn on what was asked to */
-		mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK);
-		mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0);
-		mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0);
-		mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0);
-		break;
-	}
-
-	ATEN2011_port->shadowMCR = mcr;
-
-	Data = ATEN2011_port->shadowMCR;
-	status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	if (status < 0) {
-		dbg("setting MODEM_CONTROL_REGISTER Failed");
-		return -1;
-	}
-
-	return 0;
-}
-
-static int get_modem_info(struct ATENINTL_port *ATEN2011_port,
-			  unsigned int __user *value)
-{
-	unsigned int result = 0;
-	__u16 msr;
-	unsigned int mcr = ATEN2011_port->shadowMCR;
-	int status;
-
-	status = get_uart_reg(ATEN2011_port->port, MODEM_STATUS_REGISTER, &msr);
-	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)	/* 0x002 */
-	    |((mcr & MCR_RTS) ? TIOCM_RTS : 0)	/* 0x004 */
-	    |((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0)	/* 0x020 */
-	    |((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0)	/* 0x040 */
-	    |((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0)	/* 0x080 */
-	    |((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0);	/* 0x100 */
-
-	dbg("%s -- %x", __func__, result);
-
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	return 0;
-}
-
-static int get_serial_info(struct ATENINTL_port *ATEN2011_port,
-			   struct serial_struct __user *retinfo)
-{
-	struct serial_struct tmp;
-
-	if (ATEN2011_port == NULL)
-		return -1;
-
-	if (!retinfo)
-		return -EFAULT;
-
-	memset(&tmp, 0, sizeof(tmp));
-
-	tmp.type = PORT_16550A;
-	tmp.line = ATEN2011_port->port->serial->minor;
-	if (tmp.line == SERIAL_TTY_NO_MINOR)
-		tmp.line = 0;
-	tmp.port = ATEN2011_port->port->number;
-	tmp.irq = 0;
-	tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
-	tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
-	tmp.baud_base = 9600;
-	tmp.close_delay = 5 * HZ;
-	tmp.closing_wait = 30 * HZ;
-
-	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
-		return -EFAULT;
-	return 0;
-}
-
-static int ATEN2011_ioctl(struct tty_struct *tty, struct file *file,
-			  unsigned int cmd, unsigned long arg)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ATENINTL_port *ATEN2011_port;
-	struct async_icount cnow;
-	struct async_icount cprev;
-	struct serial_icounter_struct icount;
-	int ATENret = 0;
-	unsigned int __user *user_arg = (unsigned int __user *)arg;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return -1;
-
-	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
-
-	switch (cmd) {
-		/* return number of bytes available */
-
-	case TIOCINQ:
-		dbg("%s (%d) TIOCINQ", __func__, port->number);
-		return get_number_bytes_avail(tty, ATEN2011_port, user_arg);
-		break;
-
-	case TIOCOUTQ:
-		dbg("%s (%d) TIOCOUTQ", __func__, port->number);
-		return put_user(ATEN2011_chars_in_buffer(tty), user_arg);
-		break;
-
-	case TIOCSERGETLSR:
-		dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
-		return get_lsr_info(tty, ATEN2011_port, user_arg);
-		return 0;
-
-	case TIOCMBIS:
-	case TIOCMBIC:
-	case TIOCMSET:
-		dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__,
-		    port->number);
-		ATENret = set_modem_info(ATEN2011_port, cmd, user_arg);
-		return ATENret;
-
-	case TIOCMGET:
-		dbg("%s (%d) TIOCMGET", __func__, port->number);
-		return get_modem_info(ATEN2011_port, user_arg);
-
-	case TIOCGSERIAL:
-		dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
-		return get_serial_info(ATEN2011_port,
-				       (struct serial_struct __user *)arg);
-
-	case TIOCSSERIAL:
-		dbg("%s (%d) TIOCSSERIAL", __func__, port->number);
-		break;
-
-	case TIOCMIWAIT:
-		dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
-		cprev = ATEN2011_port->icount;
-		while (1) {
-			/* see if a signal did it */
-			if (signal_pending(current))
-				return -ERESTARTSYS;
-			cnow = ATEN2011_port->icount;
-			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-				return -EIO;	/* no change => error */
-			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-			    ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
-			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
-				return 0;
-			}
-			cprev = cnow;
-		}
-		/* NOTREACHED */
-		break;
-
-	case TIOCGICOUNT:
-		cnow = ATEN2011_port->icount;
-		icount.cts = cnow.cts;
-		icount.dsr = cnow.dsr;
-		icount.rng = cnow.rng;
-		icount.dcd = cnow.dcd;
-		icount.rx = cnow.rx;
-		icount.tx = cnow.tx;
-		icount.frame = cnow.frame;
-		icount.overrun = cnow.overrun;
-		icount.parity = cnow.parity;
-		icount.brk = cnow.brk;
-		icount.buf_overrun = cnow.buf_overrun;
-
-		dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
-		    port->number, icount.rx, icount.tx);
-		if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
-			return -EFAULT;
-		return 0;
-
-	default:
-		break;
-	}
-
-	return -ENOIOCTLCMD;
-}
-
-static int ATEN2011_calc_baud_rate_divisor(int baudRate, int *divisor,
-					   __u16 *clk_sel_val)
-{
-	dbg("%s - %d", __func__, baudRate);
-
-	if (baudRate <= 115200) {
-		*divisor = 115200 / baudRate;
-		*clk_sel_val = 0x0;
-	}
-	if ((baudRate > 115200) && (baudRate <= 230400)) {
-		*divisor = 230400 / baudRate;
-		*clk_sel_val = 0x10;
-	} else if ((baudRate > 230400) && (baudRate <= 403200)) {
-		*divisor = 403200 / baudRate;
-		*clk_sel_val = 0x20;
-	} else if ((baudRate > 403200) && (baudRate <= 460800)) {
-		*divisor = 460800 / baudRate;
-		*clk_sel_val = 0x30;
-	} else if ((baudRate > 460800) && (baudRate <= 806400)) {
-		*divisor = 806400 / baudRate;
-		*clk_sel_val = 0x40;
-	} else if ((baudRate > 806400) && (baudRate <= 921600)) {
-		*divisor = 921600 / baudRate;
-		*clk_sel_val = 0x50;
-	} else if ((baudRate > 921600) && (baudRate <= 1572864)) {
-		*divisor = 1572864 / baudRate;
-		*clk_sel_val = 0x60;
-	} else if ((baudRate > 1572864) && (baudRate <= 3145728)) {
-		*divisor = 3145728 / baudRate;
-		*clk_sel_val = 0x70;
-	}
-	return 0;
-}
-
-static int ATEN2011_send_cmd_write_baud_rate(struct ATENINTL_port
-					     *ATEN2011_port, int baudRate)
-{
-	int divisor = 0;
-	int status;
-	__u16 Data;
-	unsigned char number;
-	__u16 clk_sel_val;
-	struct usb_serial_port *port;
-	int minor;
-
-	if (ATEN2011_port == NULL)
-		return -1;
-
-	port = (struct usb_serial_port *)ATEN2011_port->port;
-
-	dbg("%s", "Entering .......... ");
-
-	minor = ATEN2011_port->port->serial->minor;
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-	number = ATEN2011_port->port->number - minor;
-
-	dbg("%s - port = %d, baud = %d", __func__,
-	    ATEN2011_port->port->number, baudRate);
-	/* reset clk_uart_sel in spregOffset */
-	if (baudRate > 115200) {
-#ifdef HW_flow_control
-		/*
-		 * NOTE: need to see the pther register to modify
-		 * setting h/w flow control bit to 1;
-		 */
-		/* Data = ATEN2011_port->shadowMCR; */
-		Data = 0x2b;
-		ATEN2011_port->shadowMCR = Data;
-		status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud");
-			return -1;
-		}
-#endif
-
-	} else {
-#ifdef HW_flow_control
-		/* setting h/w flow control bit to 0; */
-		/* Data = ATEN2011_port->shadowMCR; */
-		Data = 0xb;
-		ATEN2011_port->shadowMCR = Data;
-		status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud");
-			return -1;
-		}
-#endif
-
-	}
-
-	if (1)			/* baudRate <= 115200) */ {
-		clk_sel_val = 0x0;
-		Data = 0x0;
-		status =
-		    ATEN2011_calc_baud_rate_divisor(baudRate, &divisor,
-						    &clk_sel_val);
-		status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
-		if (status < 0) {
-			dbg("reading spreg failed in set_serial_baud");
-			return -1;
-		}
-		Data = (Data & 0x8f) | clk_sel_val;
-		status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud");
-			return -1;
-		}
-		/* Calculate the Divisor */
-
-		if (status) {
-			err("%s - bad baud rate", __func__);
-			dbg("%s", "bad baud rate");
-			return status;
-		}
-		/* Enable access to divisor latch */
-		Data = ATEN2011_port->shadowLCR | SERIAL_LCR_DLAB;
-		ATEN2011_port->shadowLCR = Data;
-		set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-		/* Write the divisor */
-		Data = (unsigned char)(divisor & 0xff);
-		dbg("set_serial_baud Value to write DLL is %x", Data);
-		set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
-
-		Data = (unsigned char)((divisor & 0xff00) >> 8);
-		dbg("set_serial_baud Value to write DLM is %x", Data);
-		set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
-
-		/* Disable access to divisor latch */
-		Data = ATEN2011_port->shadowLCR & ~SERIAL_LCR_DLAB;
-		ATEN2011_port->shadowLCR = Data;
-		set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-	}
-
-	return status;
-}
-
-static void ATEN2011_change_port_settings(struct tty_struct *tty,
-					  struct ATENINTL_port *ATEN2011_port,
-					  struct ktermios *old_termios)
-{
-	int baud;
-	unsigned cflag;
-	unsigned iflag;
-	__u8 lData;
-	__u8 lParity;
-	__u8 lStop;
-	int status;
-	__u16 Data;
-	struct usb_serial_port *port;
-	struct usb_serial *serial;
-
-	if (ATEN2011_port == NULL)
-		return;
-
-	port = (struct usb_serial_port *)ATEN2011_port->port;
-
-	serial = port->serial;
-
-	dbg("%s - port %d", __func__, ATEN2011_port->port->number);
-
-	if (!ATEN2011_port->open) {
-		dbg("%s - port not opened", __func__);
-		return;
-	}
-
-	if ((!tty) || (!tty->termios)) {
-		dbg("%s - no tty structures", __func__);
-		return;
-	}
-
-	dbg("%s", "Entering .......... ");
-
-	lData = LCR_BITS_8;
-	lStop = LCR_STOP_1;
-	lParity = LCR_PAR_NONE;
-
-	cflag = tty->termios->c_cflag;
-	iflag = tty->termios->c_iflag;
-
-	/* Change the number of bits */
-
-	/* COMMENT1: the below Line"if(cflag & CSIZE)" is added for the errors we get for serial loop data test i.e serial_loopback.pl -v */
-	/* if(cflag & CSIZE) */
-	{
-		switch (cflag & CSIZE) {
-		case CS5:
-			lData = LCR_BITS_5;
-			break;
-
-		case CS6:
-			lData = LCR_BITS_6;
-			break;
-
-		case CS7:
-			lData = LCR_BITS_7;
-			break;
-		default:
-		case CS8:
-			lData = LCR_BITS_8;
-			break;
-		}
-	}
-	/* Change the Parity bit */
-	if (cflag & PARENB) {
-		if (cflag & PARODD) {
-			lParity = LCR_PAR_ODD;
-			dbg("%s - parity = odd", __func__);
-		} else {
-			lParity = LCR_PAR_EVEN;
-			dbg("%s - parity = even", __func__);
-		}
-
-	} else {
-		dbg("%s - parity = none", __func__);
-	}
-
-	if (cflag & CMSPAR)
-		lParity = lParity | 0x20;
-
-	/* Change the Stop bit */
-	if (cflag & CSTOPB) {
-		lStop = LCR_STOP_2;
-		dbg("%s - stop bits = 2", __func__);
-	} else {
-		lStop = LCR_STOP_1;
-		dbg("%s - stop bits = 1", __func__);
-	}
-
-	/* Update the LCR with the correct value */
-	ATEN2011_port->shadowLCR &=
-	    ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
-	ATEN2011_port->shadowLCR |= (lData | lParity | lStop);
-
-	dbg
-	    ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is %x",
-	     ATEN2011_port->shadowLCR);
-	/* Disable Interrupts */
-	Data = 0x00;
-	set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-	Data = 0x00;
-	set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-
-	Data = 0xcf;
-	set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-
-	/* Send the updated LCR value to the ATEN2011 */
-	Data = ATEN2011_port->shadowLCR;
-
-	set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-	Data = 0x00b;
-	ATEN2011_port->shadowMCR = Data;
-	set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	Data = 0x00b;
-	set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-
-	/* set up the MCR register and send it to the ATEN2011 */
-
-	ATEN2011_port->shadowMCR = MCR_MASTER_IE;
-	if (cflag & CBAUD)
-		ATEN2011_port->shadowMCR |= (MCR_DTR | MCR_RTS);
-
-	if (cflag & CRTSCTS)
-		ATEN2011_port->shadowMCR |= (MCR_XON_ANY);
-	else
-		ATEN2011_port->shadowMCR &= ~(MCR_XON_ANY);
-
-	Data = ATEN2011_port->shadowMCR;
-	set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-
-	/* Determine divisor based on baud rate */
-	baud = tty_get_baud_rate(tty);
-
-	if (!baud) {
-		/* pick a default, any default... */
-		dbg("%s", "Picked default baud...");
-		baud = 9600;
-	}
-
-	dbg("%s - baud rate = %d", __func__, baud);
-	status = ATEN2011_send_cmd_write_baud_rate(ATEN2011_port, baud);
-
-	/* Enable Interrupts */
-	Data = 0x0c;
-	set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-	if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
-		ATEN2011_port->read_urb->dev = serial->dev;
-
-		status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
-
-		if (status) {
-			dbg
-			    (" usb_submit_urb(read bulk) failed, status = %d",
-			     status);
-		}
-	}
-	dbg
-	    ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is End %x",
-	     ATEN2011_port->shadowLCR);
-
-	return;
-}
-
-static int ATEN2011_calc_num_ports(struct usb_serial *serial)
-{
-
-	__u16 Data = 0x00;
-	int ret = 0;
-	int ATEN2011_2or4ports;
-	ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-			      ATEN_RDREQ, ATEN_RD_RTYPE, 0, GPIO_REGISTER,
-			      &Data, VENDOR_READ_LENGTH, ATEN_WDR_TIMEOUT);
-
-/* ghostgum: here is where the problem appears to bet */
-/* Which of the following are needed? */
-/* Greg used the serial->type->num_ports=2 */
-/* But the code in the ATEN2011_open relies on serial->num_ports=2 */
-	if ((Data & 0x01) == 0) {
-		ATEN2011_2or4ports = 2;
-		serial->type->num_ports = 2;
-		serial->num_ports = 2;
-	}
-	/* else if(serial->interface->cur_altsetting->desc.bNumEndpoints == 9) */
-	else {
-		ATEN2011_2or4ports = 4;
-		serial->type->num_ports = 4;
-		serial->num_ports = 4;
-
-	}
-
-	return ATEN2011_2or4ports;
-}
-
-static int ATEN2011_startup(struct usb_serial *serial)
-{
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-	struct usb_device *dev;
-	int i, status;
-	int minor;
-
-	__u16 Data;
-	dbg("%s", " ATEN2011_startup :entering..........");
-
-	if (!serial) {
-		dbg("%s", "Invalid Handler");
-		return -1;
-	}
-
-	dev = serial->dev;
-
-	dbg("%s", "Entering...");
-
-	/* create our private serial structure */
-	ATEN2011_serial = kzalloc(sizeof(struct ATENINTL_serial), GFP_KERNEL);
-	if (ATEN2011_serial == NULL) {
-		err("%s - Out of memory", __func__);
-		return -ENOMEM;
-	}
-
-	/* resetting the private structure field values to zero */
-	memset(ATEN2011_serial, 0, sizeof(struct ATENINTL_serial));
-
-	ATEN2011_serial->serial = serial;
-	/* initilize status polling flag to 0 */
-	ATEN2011_serial->status_polling_started = 0;
-
-	usb_set_serial_data(serial, ATEN2011_serial);
-	ATEN2011_serial->ATEN2011_spectrum_2or4ports =
-	    ATEN2011_calc_num_ports(serial);
-	/* we set up the pointers to the endpoints in the ATEN2011_open *
-	 * function, as the structures aren't created yet.             */
-
-	/* set up port private structures */
-	for (i = 0; i < serial->num_ports; ++i) {
-		ATEN2011_port =
-		    kmalloc(sizeof(struct ATENINTL_port), GFP_KERNEL);
-		if (ATEN2011_port == NULL) {
-			err("%s - Out of memory", __func__);
-			usb_set_serial_data(serial, NULL);
-			kfree(ATEN2011_serial);
-			return -ENOMEM;
-		}
-		memset(ATEN2011_port, 0, sizeof(struct ATENINTL_port));
-
-		/*
-		 * Initialize all port interrupt end point to port 0
-		 * int endpoint. Our device has only one interrupt end point
-		 * comman to all port
-		 */
-		/* serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress; */
-
-		ATEN2011_port->port = serial->port[i];
-		usb_set_serial_port_data(serial->port[i], ATEN2011_port);
-
-		minor = serial->port[i]->serial->minor;
-		if (minor == SERIAL_TTY_NO_MINOR)
-			minor = 0;
-		ATEN2011_port->port_num =
-		    ((serial->port[i]->number - minor) + 1);
-
-		if (ATEN2011_port->port_num == 1) {
-			ATEN2011_port->SpRegOffset = 0x0;
-			ATEN2011_port->ControlRegOffset = 0x1;
-			ATEN2011_port->DcrRegOffset = 0x4;
-		} else if ((ATEN2011_port->port_num == 2)
-			   && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-			       4)) {
-			ATEN2011_port->SpRegOffset = 0x8;
-			ATEN2011_port->ControlRegOffset = 0x9;
-			ATEN2011_port->DcrRegOffset = 0x16;
-		} else if ((ATEN2011_port->port_num == 2)
-			   && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-			       2)) {
-			ATEN2011_port->SpRegOffset = 0xa;
-			ATEN2011_port->ControlRegOffset = 0xb;
-			ATEN2011_port->DcrRegOffset = 0x19;
-		} else if ((ATEN2011_port->port_num == 3)
-			   && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-			       4)) {
-			ATEN2011_port->SpRegOffset = 0xa;
-			ATEN2011_port->ControlRegOffset = 0xb;
-			ATEN2011_port->DcrRegOffset = 0x19;
-		} else if ((ATEN2011_port->port_num == 4)
-			   && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-			       4)) {
-			ATEN2011_port->SpRegOffset = 0xc;
-			ATEN2011_port->ControlRegOffset = 0xd;
-			ATEN2011_port->DcrRegOffset = 0x1c;
-		}
-
-		usb_set_serial_port_data(serial->port[i], ATEN2011_port);
-
-		/* enable rx_disable bit in control register */
-
-		status = get_reg_sync(serial->port[i],
-				      ATEN2011_port->ControlRegOffset, &Data);
-		if (status < 0) {
-			dbg("Reading ControlReg failed status-0x%x",
-				status);
-			break;
-		} else
-			dbg
-			    ("ControlReg Reading success val is %x, status%d",
-			     Data, status);
-		Data |= 0x08;	/* setting driver done bit */
-		Data |= 0x04;	/* sp1_bit to have cts change reflect in modem status reg */
-
-		/* Data |= 0x20; */	/* rx_disable bit */
-		status = set_reg_sync(serial->port[i],
-				      ATEN2011_port->ControlRegOffset, Data);
-		if (status < 0) {
-			dbg
-			    ("Writing ControlReg failed(rx_disable) status-0x%x",
-			     status);
-			break;
-		} else
-			dbg
-			    ("ControlReg Writing success(rx_disable) status%d",
-			     status);
-
-		/*
-		 * Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
-		 * and 0x24 in DCR3
-		 */
-		Data = 0x01;
-		status = set_reg_sync(serial->port[i],
-				      (__u16)(ATEN2011_port->DcrRegOffset + 0),
-				      Data);
-		if (status < 0) {
-			dbg("Writing DCR0 failed status-0x%x", status);
-			break;
-		} else
-			dbg("DCR0 Writing success status%d", status);
-
-		Data = 0x05;
-		status = set_reg_sync(serial->port[i],
-				      (__u16)(ATEN2011_port->DcrRegOffset + 1),
-				      Data);
-		if (status < 0) {
-			dbg("Writing DCR1 failed status-0x%x", status);
-			break;
-		} else
-			dbg("DCR1 Writing success status%d", status);
-
-		Data = 0x24;
-		status = set_reg_sync(serial->port[i],
-				      (__u16)(ATEN2011_port->DcrRegOffset + 2),
-				      Data);
-		if (status < 0) {
-			dbg("Writing DCR2 failed status-0x%x", status);
-			break;
-		} else
-			dbg("DCR2 Writing success status%d", status);
-
-		/* write values in clkstart0x0 and clkmulti 0x20 */
-		Data = 0x0;
-		status = set_reg_sync(serial->port[i], CLK_START_VALUE_REGISTER,
-				      Data);
-		if (status < 0) {
-			dbg
-			    ("Writing CLK_START_VALUE_REGISTER failed status-0x%x",
-			     status);
-			break;
-		} else
-			dbg
-			    ("CLK_START_VALUE_REGISTER Writing success status%d",
-			     status);
-
-		Data = 0x20;
-		status = set_reg_sync(serial->port[i], CLK_MULTI_REGISTER,
-				      Data);
-		if (status < 0) {
-			dbg
-			    ("Writing CLK_MULTI_REGISTER failed status-0x%x",
-			     status);
-			break;
-		} else
-			dbg("CLK_MULTI_REGISTER Writing success status%d",
-				status);
-
-		/* Zero Length flag register */
-		if ((ATEN2011_port->port_num != 1)
-		    && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)) {
-
-			Data = 0xff;
-			status = set_reg_sync(serial->port[i],
-					      (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num)),
-					      Data);
-			dbg("ZLIP offset%x",
-				(__u16) (ZLP_REG1 +
-					 ((__u16) ATEN2011_port->port_num)));
-			if (status < 0) {
-				dbg
-				    ("Writing ZLP_REG%d failed status-0x%x",
-				     i + 2, status);
-				break;
-			} else
-				dbg("ZLP_REG%d Writing success status%d",
-					i + 2, status);
-		} else {
-			Data = 0xff;
-			status = set_reg_sync(serial->port[i],
-					      (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num) - 0x1),
-					      Data);
-			dbg("ZLIP offset%x",
-				(__u16) (ZLP_REG1 +
-					 ((__u16) ATEN2011_port->port_num) -
-					 0x1));
-			if (status < 0) {
-				dbg
-				    ("Writing ZLP_REG%d failed status-0x%x",
-				     i + 1, status);
-				break;
-			} else
-				dbg("ZLP_REG%d Writing success status%d",
-					i + 1, status);
-
-		}
-		ATEN2011_port->control_urb = usb_alloc_urb(0, GFP_ATOMIC);
-		ATEN2011_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
-
-	}
-
-	/* Zero Length flag enable */
-	Data = 0x0f;
-	status = set_reg_sync(serial->port[0], ZLP_REG5, Data);
-	if (status < 0) {
-		dbg("Writing ZLP_REG5 failed status-0x%x", status);
-		return -1;
-	} else
-		dbg("ZLP_REG5 Writing success status%d", status);
-
-	/* setting configuration feature to one */
-	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			(__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ);
-	return 0;
-}
-
-static void ATEN2011_release(struct usb_serial *serial)
-{
-	int i;
-	struct ATENINTL_port *ATEN2011_port;
-
-	/* check for the ports to be closed,close the ports and disconnect */
-
-	/* free private structure allocated for serial port  *
-	 * stop reads and writes on all ports                */
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		ATEN2011_port = usb_get_serial_port_data(serial->port[i]);
-		kfree(ATEN2011_port->ctrl_buf);
-		usb_kill_urb(ATEN2011_port->control_urb);
-		kfree(ATEN2011_port);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-
-	/* free private structure allocated for serial device */
-
-	kfree(usb_get_serial_data(serial));
-	usb_set_serial_data(serial, NULL);
-}
-
-static struct usb_serial_driver aten_serial_driver = {
-	.driver = {
-		.owner =	THIS_MODULE,
-		.name =		"aten2011",
-		},
-	.description =		DRIVER_DESC,
-	.id_table =		id_table,
-	.open =			ATEN2011_open,
-	.close =		ATEN2011_close,
-	.write =		ATEN2011_write,
-	.write_room =		ATEN2011_write_room,
-	.chars_in_buffer =	ATEN2011_chars_in_buffer,
-	.throttle =		ATEN2011_throttle,
-	.unthrottle =		ATEN2011_unthrottle,
-	.calc_num_ports =	ATEN2011_calc_num_ports,
-
-	.ioctl =		ATEN2011_ioctl,
-	.set_termios =		ATEN2011_set_termios,
-	.break_ctl =		ATEN2011_break,
-	.tiocmget =		ATEN2011_tiocmget,
-	.tiocmset =		ATEN2011_tiocmset,
-	.attach =		ATEN2011_startup,
-	.release =		ATEN2011_release,
-	.read_bulk_callback =	ATEN2011_bulk_in_callback,
-	.read_int_callback =	ATEN2011_interrupt_callback,
-};
-
-static struct usb_driver aten_driver = {
-	.name =		"aten2011",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
-static int __init aten_init(void)
-{
-	int retval;
-
-	/* Register with the usb serial */
-	retval = usb_serial_register(&aten_serial_driver);
-	if (retval)
-		return retval;
-
-	printk(KERN_INFO KBUILD_MODNAME ":"
-	       DRIVER_DESC " " DRIVER_VERSION "\n");
-
-	/* Register with the usb */
-	retval = usb_register(&aten_driver);
-	if (retval)
-		usb_serial_deregister(&aten_serial_driver);
-
-	return retval;
-}
-
-static void __exit aten_exit(void)
-{
-	usb_deregister(&aten_driver);
-	usb_serial_deregister(&aten_serial_driver);
-}
-
-module_init(aten_init);
-module_exit(aten_exit);
-
-/* Module information */
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c
index 0ab9d15f343..f5416af1e90 100644
--- a/drivers/staging/udlfb/udlfb.c
+++ b/drivers/staging/udlfb/udlfb.c
@@ -21,6 +21,7 @@
 #include <linux/mm.h>
 #include <linux/fb.h>
 #include <linux/mutex.h>
+#include <linux/vmalloc.h>
 
 #include "udlfb.h"
 
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index 22f93dd0ba0..251220dc885 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/smp_lock.h>
 #include <linux/file.h>
 #include <linux/tcp.h>
 #include <linux/in.h>
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index a10ed27acbc..f43ca416e4a 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -344,7 +344,7 @@ static CHIP_INFO chip_info_table[]= {
 };
 
 static struct pci_device_id device_id_table[] __devinitdata = {
-{ 0x1106, 0x3253, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (int)&chip_info_table[0]},
+{ 0x1106, 0x3253, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long)&chip_info_table[0]},
 { 0, }
 };
 #endif
@@ -369,7 +369,7 @@ static int  device_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 
 #ifdef CONFIG_PM
 static int device_notify_reboot(struct notifier_block *, unsigned long event, void *ptr);
-static int viawget_suspend(struct pci_dev *pcid, u32 state);
+static int viawget_suspend(struct pci_dev *pcid, pm_message_t state);
 static int viawget_resume(struct pci_dev *pcid);
 struct notifier_block device_notifier = {
         notifier_call:  device_notify_reboot,
@@ -3941,7 +3941,7 @@ device_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
         while ((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) {
             if(pci_dev_driver(pdev) == &device_driver) {
                 if (pci_get_drvdata(pdev))
-                    viawget_suspend(pdev, 3);
+                    viawget_suspend(pdev, PMSG_HIBERNATE);
             }
         }
     }
@@ -3949,7 +3949,7 @@ device_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
 }
 
 static int
-viawget_suspend(struct pci_dev *pcid, u32 state)
+viawget_suspend(struct pci_dev *pcid, pm_message_t state)
 {
     int power_status;   // to silence the compiler
 
@@ -3971,7 +3971,7 @@ viawget_suspend(struct pci_dev *pcid, u32 state)
     memset(pMgmt->abyCurrBSSID, 0, 6);
     pMgmt->eCurrState = WMAC_STATE_IDLE;
     pci_disable_device(pcid);
-    power_status = pci_set_power_state(pcid, state);
+    power_status = pci_set_power_state(pcid, pci_choose_state(pcid, state));
     spin_unlock_irq(&pDevice->lock);
     return 0;
 }
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index a913efc6966..40de151f278 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -257,6 +257,7 @@
 #include <linux/fs.h>		/* everything... */
 #include <linux/errno.h>	/* error codes */
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
diff --git a/drivers/telephony/phonedev.c b/drivers/telephony/phonedev.c
index b52cc830c0b..f3873f650bb 100644
--- a/drivers/telephony/phonedev.c
+++ b/drivers/telephony/phonedev.c
@@ -23,7 +23,6 @@
 #include <linux/errno.h>
 #include <linux/phonedev.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
 
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 0a69672097a..4e83c297ec9 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -953,7 +953,12 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
 
 	mutex_lock(&tz->lock);
 
-	tz->ops->get_temp(tz, &temp);
+	if (tz->ops->get_temp(tz, &temp)) {
+		/* get_temp failed - retry it later */
+		printk(KERN_WARNING PREFIX "failed to read out thermal zone "
+		       "%d\n", tz->id);
+		goto leave;
+	}
 
 	for (count = 0; count < tz->trips; count++) {
 		tz->ops->get_trip_type(tz, count, &trip_type);
@@ -1005,6 +1010,8 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
 					    THERMAL_TRIPS_NONE);
 
 	tz->last_temperature = temp;
+
+      leave:
 	if (tz->passive)
 		thermal_zone_device_set_polling(tz, tz->passive_delay);
 	else if (tz->polling_delay)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 38bfdb0f666..2bfc41ece0e 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -462,11 +462,18 @@ urbs:
 
 		rcv->buffer = buf;
 
-		usb_fill_bulk_urb(rcv->urb, acm->dev,
-				  acm->rx_endpoint,
-				  buf->base,
-				  acm->readsize,
-				  acm_read_bulk, rcv);
+		if (acm->is_int_ep)
+			usb_fill_int_urb(rcv->urb, acm->dev,
+					 acm->rx_endpoint,
+					 buf->base,
+					 acm->readsize,
+					 acm_read_bulk, rcv, acm->bInterval);
+		else
+			usb_fill_bulk_urb(rcv->urb, acm->dev,
+					  acm->rx_endpoint,
+					  buf->base,
+					  acm->readsize,
+					  acm_read_bulk, rcv);
 		rcv->urb->transfer_dma = buf->dma;
 		rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
@@ -550,7 +557,7 @@ static void acm_waker(struct work_struct *waker)
 static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 {
 	struct acm *acm;
-	int rv = -EINVAL;
+	int rv = -ENODEV;
 	int i;
 	dbg("Entering acm_tty_open.");
 
@@ -677,7 +684,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 
 	/* Perform the closing process and see if we need to do the hardware
 	   shutdown */
-	if (tty_port_close_start(&acm->port, tty, filp) == 0)
+	if (!acm || tty_port_close_start(&acm->port, tty, filp) == 0)
 		return;
 	acm_port_down(acm, 0);
 	tty_port_close_end(&acm->port, tty);
@@ -740,7 +747,7 @@ static int acm_tty_chars_in_buffer(struct tty_struct *tty)
 {
 	struct acm *acm = tty->driver_data;
 	if (!ACM_READY(acm))
-		return -EINVAL;
+		return 0;
 	/*
 	 * This is inaccurate (overcounts), but it works.
 	 */
@@ -1173,6 +1180,9 @@ made_compressed_probe:
 	spin_lock_init(&acm->read_lock);
 	mutex_init(&acm->mutex);
 	acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
+	acm->is_int_ep = usb_endpoint_xfer_int(epread);
+	if (acm->is_int_ep)
+		acm->bInterval = epread->bInterval;
 	tty_port_init(&acm->port);
 	acm->port.ops = &acm_port_ops;
 
@@ -1227,9 +1237,14 @@ made_compressed_probe:
 			goto alloc_fail7;
 		}
 
-		usb_fill_bulk_urb(snd->urb, usb_dev,
-			usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
-			NULL, acm->writesize, acm_write_bulk, snd);
+		if (usb_endpoint_xfer_int(epwrite))
+			usb_fill_int_urb(snd->urb, usb_dev,
+				usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+				NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval);
+		else
+			usb_fill_bulk_urb(snd->urb, usb_dev,
+				usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+				NULL, acm->writesize, acm_write_bulk, snd);
 		snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 		snd->instance = acm;
 	}
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 1602324808b..c4a0ee8ffcc 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -126,6 +126,8 @@ struct acm {
 	unsigned int ctrl_caps;				/* control capabilities from the class specific header */
 	unsigned int susp_count;			/* number of suspended interfaces */
 	int combined_interfaces:1;			/* control and data collapsed */
+	int is_int_ep:1;				/* interrupt endpoints contrary to spec used */
+	u8 bInterval;
 	struct acm_wb *delayed_wb;			/* write queued for a device about to be woken */
 };
 
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 0fe434505ac..ba589d4ca8b 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -15,7 +15,6 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
 #include <linux/bitops.h>
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 3703789d0d2..b09a527f734 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -751,7 +751,7 @@ static int get_capabilities(struct usbtmc_device_data *data)
 {
 	struct device *dev = &data->usb_dev->dev;
 	char *buffer;
-	int rv;
+	int rv = 0;
 
 	buffer = kmalloc(0x18, GFP_KERNEL);
 	if (!buffer)
@@ -763,7 +763,7 @@ static int get_capabilities(struct usbtmc_device_data *data)
 			     0, 0, buffer, 0x18, USBTMC_TIMEOUT);
 	if (rv < 0) {
 		dev_err(dev, "usb_control_msg returned %d\n", rv);
-		return rv;
+		goto err_out;
 	}
 
 	dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
@@ -773,7 +773,8 @@ static int get_capabilities(struct usbtmc_device_data *data)
 	dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]);
 	if (buffer[0] != USBTMC_STATUS_SUCCESS) {
 		dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
-		return -EPERM;
+		rv = -EPERM;
+		goto err_out;
 	}
 
 	data->capabilities.interface_capabilities = buffer[4];
@@ -781,8 +782,9 @@ static int get_capabilities(struct usbtmc_device_data *data)
 	data->capabilities.usb488_interface_capabilities = buffer[14];
 	data->capabilities.usb488_device_capabilities = buffer[15];
 
+err_out:
 	kfree(buffer);
-	return 0;
+	return rv;
 }
 
 #define capability_attribute(name)					\
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 69280c35b5c..ad925946f86 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -28,7 +28,7 @@ comment "Miscellaneous USB options"
 	depends on USB
 
 config USB_DEVICEFS
-	bool "USB device filesystem (DEPRECATED)" if EMBEDDED
+	bool "USB device filesystem (DEPRECATED)"
 	depends on USB
 	---help---
 	  If you say Y here (and to "/proc file system support" in the "File
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 24dfb33f90c..a16c538d013 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -80,38 +80,18 @@ static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 	int max_tx;
 	int i;
 
-	/* Allocate space for the SS endpoint companion descriptor */
-	ep->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
-			GFP_KERNEL);
-	if (!ep->ss_ep_comp)
-		return -ENOMEM;
 	desc = (struct usb_ss_ep_comp_descriptor *) buffer;
 	if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP) {
 		dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
 				" interface %d altsetting %d ep %d: "
 				"using minimum values\n",
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
-		ep->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
-		ep->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
-		ep->ss_ep_comp->desc.bMaxBurst = 0;
-		/*
-		 * Leave bmAttributes as zero, which will mean no streams for
-		 * bulk, and isoc won't support multiple bursts of packets.
-		 * With bursts of only one packet, and a Mult of 1, the max
-		 * amount of data moved per endpoint service interval is one
-		 * packet.
-		 */
-		if (usb_endpoint_xfer_isoc(&ep->desc) ||
-				usb_endpoint_xfer_int(&ep->desc))
-			ep->ss_ep_comp->desc.wBytesPerInterval =
-				ep->desc.wMaxPacketSize;
 		/*
 		 * The next descriptor is for an Endpoint or Interface,
 		 * no extra descriptors to copy into the companion structure,
 		 * and we didn't eat up any of the buffer.
 		 */
-		retval = 0;
-		goto valid;
+		return 0;
 	}
 	memcpy(&ep->ss_ep_comp->desc, desc, USB_DT_SS_EP_COMP_SIZE);
 	desc = &ep->ss_ep_comp->desc;
@@ -320,6 +300,28 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 		buffer += i;
 		size -= i;
 
+		/* Allocate space for the SS endpoint companion descriptor */
+		endpoint->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
+				GFP_KERNEL);
+		if (!endpoint->ss_ep_comp)
+			return -ENOMEM;
+
+		/* Fill in some default values (may be overwritten later) */
+		endpoint->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
+		endpoint->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
+		endpoint->ss_ep_comp->desc.bMaxBurst = 0;
+		/*
+		 * Leave bmAttributes as zero, which will mean no streams for
+		 * bulk, and isoc won't support multiple bursts of packets.
+		 * With bursts of only one packet, and a Mult of 1, the max
+		 * amount of data moved per endpoint service interval is one
+		 * packet.
+		 */
+		if (usb_endpoint_xfer_isoc(&endpoint->desc) ||
+				usb_endpoint_xfer_int(&endpoint->desc))
+			endpoint->ss_ep_comp->desc.wBytesPerInterval =
+				endpoint->desc.wMaxPacketSize;
+
 		if (size > 0) {
 			retval = usb_parse_ss_endpoint_companion(ddev, cfgno,
 					inum, asnum, endpoint, num_ep, buffer,
@@ -329,6 +331,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 				retval = buffer - buffer0;
 			}
 		} else {
+			dev_warn(ddev, "config %d interface %d altsetting %d "
+				"endpoint 0x%X has no "
+				"SuperSpeed companion descriptor\n",
+				cfgno, inum, asnum, d->bEndpointAddress);
 			retval = buffer - buffer0;
 		}
 	} else {
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 73c108d117b..96f11715cd2 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -136,17 +136,19 @@ static const struct class_info clas_info[] =
 	{USB_CLASS_AUDIO,		"audio"},
 	{USB_CLASS_COMM,		"comm."},
 	{USB_CLASS_HID,			"HID"},
-	{USB_CLASS_HUB,			"hub"},
 	{USB_CLASS_PHYSICAL,		"PID"},
+	{USB_CLASS_STILL_IMAGE,		"still"},
 	{USB_CLASS_PRINTER,		"print"},
 	{USB_CLASS_MASS_STORAGE,	"stor."},
+	{USB_CLASS_HUB,			"hub"},
 	{USB_CLASS_CDC_DATA,		"data"},
-	{USB_CLASS_APP_SPEC,		"app."},
-	{USB_CLASS_VENDOR_SPEC,		"vend."},
-	{USB_CLASS_STILL_IMAGE,		"still"},
 	{USB_CLASS_CSCID,		"scard"},
 	{USB_CLASS_CONTENT_SEC,		"c-sec"},
 	{USB_CLASS_VIDEO,		"video"},
+	{USB_CLASS_WIRELESS_CONTROLLER,	"wlcon"},
+	{USB_CLASS_MISC,		"misc"},
+	{USB_CLASS_APP_SPEC,		"app."},
+	{USB_CLASS_VENDOR_SPEC,		"vend."},
 	{-1,				"unk."}		/* leave as last */
 };
 
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 308609039c7..4247eccf858 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -325,21 +325,34 @@ static void async_completed(struct urb *urb)
 	struct async *as = urb->context;
 	struct dev_state *ps = as->ps;
 	struct siginfo sinfo;
+	struct pid *pid = NULL;
+	uid_t uid = 0;
+	uid_t euid = 0;
+	u32 secid = 0;
+	int signr;
 
 	spin_lock(&ps->lock);
 	list_move_tail(&as->asynclist, &ps->async_completed);
-	spin_unlock(&ps->lock);
 	as->status = urb->status;
-	if (as->signr) {
+	signr = as->signr;
+	if (signr) {
 		sinfo.si_signo = as->signr;
 		sinfo.si_errno = as->status;
 		sinfo.si_code = SI_ASYNCIO;
 		sinfo.si_addr = as->userurb;
-		kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
-				      as->euid, as->secid);
+		pid = as->pid;
+		uid = as->uid;
+		euid = as->euid;
+		secid = as->secid;
 	}
 	snoop(&urb->dev->dev, "urb complete\n");
 	snoop_urb(urb, as->userurb);
+	spin_unlock(&ps->lock);
+
+	if (signr)
+		kill_pid_info_as_uid(sinfo.si_signo, &sinfo, pid, uid,
+				      euid, secid);
+
 	wake_up(&ps->wait);
 }
 
@@ -582,7 +595,7 @@ static int usbdev_open(struct inode *inode, struct file *file)
 	if (!ps)
 		goto out;
 
-	ret = -ENOENT;
+	ret = -ENODEV;
 
 	/* usbdev device-node */
 	if (imajor(inode) == USB_DEVICE_MAJOR)
@@ -982,7 +995,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 				USBDEVFS_URB_ZERO_PACKET |
 				USBDEVFS_URB_NO_INTERRUPT))
 		return -EINVAL;
-	if (!uurb->buffer)
+	if (uurb->buffer_length > 0 && !uurb->buffer)
 		return -EINVAL;
 	if (!(uurb->type == USBDEVFS_URB_TYPE_CONTROL &&
 	    (uurb->endpoint & ~USB_ENDPOINT_DIR_MASK) == 0)) {
@@ -1038,11 +1051,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			is_in = 0;
 			uurb->endpoint &= ~USB_DIR_IN;
 		}
-		if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
-				uurb->buffer, uurb->buffer_length)) {
-			kfree(dr);
-			return -EFAULT;
-		}
 		snoop(&ps->dev->dev, "control urb: bRequest=%02x "
 			"bRrequestType=%02x wValue=%04x "
 			"wIndex=%04x wLength=%04x\n",
@@ -1062,9 +1070,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 		uurb->number_of_packets = 0;
 		if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
 			return -EINVAL;
-		if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
-				uurb->buffer, uurb->buffer_length))
-			return -EFAULT;
 		snoop(&ps->dev->dev, "bulk urb\n");
 		break;
 
@@ -1106,28 +1111,35 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			return -EINVAL;
 		if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
 			return -EINVAL;
-		if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
-				uurb->buffer, uurb->buffer_length))
-			return -EFAULT;
 		snoop(&ps->dev->dev, "interrupt urb\n");
 		break;
 
 	default:
 		return -EINVAL;
 	}
-	as = alloc_async(uurb->number_of_packets);
-	if (!as) {
+	if (uurb->buffer_length > 0 &&
+			!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
+				uurb->buffer, uurb->buffer_length)) {
 		kfree(isopkt);
 		kfree(dr);
-		return -ENOMEM;
+		return -EFAULT;
 	}
-	as->urb->transfer_buffer = kmalloc(uurb->buffer_length, GFP_KERNEL);
-	if (!as->urb->transfer_buffer) {
+	as = alloc_async(uurb->number_of_packets);
+	if (!as) {
 		kfree(isopkt);
 		kfree(dr);
-		free_async(as);
 		return -ENOMEM;
 	}
+	if (uurb->buffer_length > 0) {
+		as->urb->transfer_buffer = kmalloc(uurb->buffer_length,
+				GFP_KERNEL);
+		if (!as->urb->transfer_buffer) {
+			kfree(isopkt);
+			kfree(dr);
+			free_async(as);
+			return -ENOMEM;
+		}
+	}
 	as->urb->dev = ps->dev;
 	as->urb->pipe = (uurb->type << 30) |
 			__create_pipe(ps->dev, uurb->endpoint & 0xf) |
@@ -1169,7 +1181,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 	kfree(isopkt);
 	as->ps = ps;
 	as->userurb = arg;
-	if (uurb->endpoint & USB_DIR_IN)
+	if (is_in && uurb->buffer_length > 0)
 		as->userbuffer = uurb->buffer;
 	else
 		as->userbuffer = NULL;
@@ -1179,9 +1191,9 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 	as->uid = cred->uid;
 	as->euid = cred->euid;
 	security_task_getsecid(current, &as->secid);
-	if (!is_in) {
+	if (!is_in && uurb->buffer_length > 0) {
 		if (copy_from_user(as->urb->transfer_buffer, uurb->buffer,
-				as->urb->transfer_buffer_length)) {
+				uurb->buffer_length)) {
 			free_async(as);
 			return -EFAULT;
 		}
@@ -1231,22 +1243,22 @@ static int processcompl(struct async *as, void __user * __user *arg)
 	if (as->userbuffer)
 		if (copy_to_user(as->userbuffer, urb->transfer_buffer,
 				 urb->transfer_buffer_length))
-			return -EFAULT;
+			goto err_out;
 	if (put_user(as->status, &userurb->status))
-		return -EFAULT;
+		goto err_out;
 	if (put_user(urb->actual_length, &userurb->actual_length))
-		return -EFAULT;
+		goto err_out;
 	if (put_user(urb->error_count, &userurb->error_count))
-		return -EFAULT;
+		goto err_out;
 
 	if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
 		for (i = 0; i < urb->number_of_packets; i++) {
 			if (put_user(urb->iso_frame_desc[i].actual_length,
 				     &userurb->iso_frame_desc[i].actual_length))
-				return -EFAULT;
+				goto err_out;
 			if (put_user(urb->iso_frame_desc[i].status,
 				     &userurb->iso_frame_desc[i].status))
-				return -EFAULT;
+				goto err_out;
 		}
 	}
 
@@ -1255,6 +1267,10 @@ static int processcompl(struct async *as, void __user * __user *arg)
 	if (put_user(addr, (void __user * __user *)arg))
 		return -EFAULT;
 	return 0;
+
+err_out:
+	free_async(as);
+	return -EFAULT;
 }
 
 static struct async *reap_as(struct dev_state *ps)
@@ -1305,7 +1321,8 @@ static int get_urb32(struct usbdevfs_urb *kurb,
 		     struct usbdevfs_urb32 __user *uurb)
 {
 	__u32  uptr;
-	if (get_user(kurb->type, &uurb->type) ||
+	if (!access_ok(VERIFY_READ, uurb, sizeof(*uurb)) ||
+	    __get_user(kurb->type, &uurb->type) ||
 	    __get_user(kurb->endpoint, &uurb->endpoint) ||
 	    __get_user(kurb->status, &uurb->status) ||
 	    __get_user(kurb->flags, &uurb->flags) ||
@@ -1520,8 +1537,9 @@ static int proc_ioctl_compat(struct dev_state *ps, compat_uptr_t arg)
 	u32 udata;
 
 	uioc = compat_ptr((long)arg);
-	if (get_user(ctrl.ifno, &uioc->ifno) ||
-	    get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
+	if (!access_ok(VERIFY_READ, uioc, sizeof(*uioc)) ||
+	    __get_user(ctrl.ifno, &uioc->ifno) ||
+	    __get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
 	    __get_user(udata, &uioc->data))
 		return -EFAULT;
 	ctrl.data = compat_ptr(udata);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index ce3f453f02e..95ccfa0b9fc 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -648,7 +648,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
 	struct urb	*urb;
 	int		length;
 	unsigned long	flags;
-	char		buffer[4];	/* Any root hubs with > 31 ports? */
+	char		buffer[6];	/* Any root hubs with > 31 ports? */
 
 	if (unlikely(!hcd->rh_registered))
 		return;
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index d397ecfd5b1..ec5c67ea07b 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -227,6 +227,10 @@ struct hc_driver {
 		/* has a port been handed over to a companion? */
 	int	(*port_handed_over)(struct usb_hcd *, int);
 
+		/* CLEAR_TT_BUFFER completion callback */
+	void	(*clear_tt_buffer_complete)(struct usb_hcd *,
+				struct usb_host_endpoint *);
+
 	/* xHCI specific functions */
 		/* Called by usb_alloc_dev to alloc HC device structures */
 	int	(*alloc_dev)(struct usb_hcd *, struct usb_device *);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 2af3b4f0605..71f86c60d83 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -450,10 +450,10 @@ hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
  * talking to TTs must queue control transfers (not just bulk and iso), so
  * both can talk to the same hub concurrently.
  */
-static void hub_tt_kevent (struct work_struct *work)
+static void hub_tt_work(struct work_struct *work)
 {
 	struct usb_hub		*hub =
-		container_of(work, struct usb_hub, tt.kevent);
+		container_of(work, struct usb_hub, tt.clear_work);
 	unsigned long		flags;
 	int			limit = 100;
 
@@ -462,6 +462,7 @@ static void hub_tt_kevent (struct work_struct *work)
 		struct list_head	*next;
 		struct usb_tt_clear	*clear;
 		struct usb_device	*hdev = hub->hdev;
+		const struct hc_driver	*drv;
 		int			status;
 
 		next = hub->tt.clear_list.next;
@@ -471,21 +472,25 @@ static void hub_tt_kevent (struct work_struct *work)
 		/* drop lock so HCD can concurrently report other TT errors */
 		spin_unlock_irqrestore (&hub->tt.lock, flags);
 		status = hub_clear_tt_buffer (hdev, clear->devinfo, clear->tt);
-		spin_lock_irqsave (&hub->tt.lock, flags);
-
 		if (status)
 			dev_err (&hdev->dev,
 				"clear tt %d (%04x) error %d\n",
 				clear->tt, clear->devinfo, status);
+
+		/* Tell the HCD, even if the operation failed */
+		drv = clear->hcd->driver;
+		if (drv->clear_tt_buffer_complete)
+			(drv->clear_tt_buffer_complete)(clear->hcd, clear->ep);
+
 		kfree(clear);
+		spin_lock_irqsave(&hub->tt.lock, flags);
 	}
 	spin_unlock_irqrestore (&hub->tt.lock, flags);
 }
 
 /**
- * usb_hub_tt_clear_buffer - clear control/bulk TT state in high speed hub
- * @udev: the device whose split transaction failed
- * @pipe: identifies the endpoint of the failed transaction
+ * usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub
+ * @urb: an URB associated with the failed or incomplete split transaction
  *
  * High speed HCDs use this to tell the hub driver that some split control or
  * bulk transaction failed in a way that requires clearing internal state of
@@ -495,8 +500,10 @@ static void hub_tt_kevent (struct work_struct *work)
  * It may not be possible for that hub to handle additional full (or low)
  * speed transactions until that state is fully cleared out.
  */
-void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
+int usb_hub_clear_tt_buffer(struct urb *urb)
 {
+	struct usb_device	*udev = urb->dev;
+	int			pipe = urb->pipe;
 	struct usb_tt		*tt = udev->tt;
 	unsigned long		flags;
 	struct usb_tt_clear	*clear;
@@ -508,7 +515,7 @@ void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
 	if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) {
 		dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
 		/* FIXME recover somehow ... RESET_TT? */
-		return;
+		return -ENOMEM;
 	}
 
 	/* info that CLEAR_TT_BUFFER needs */
@@ -520,14 +527,19 @@ void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
 			: (USB_ENDPOINT_XFER_BULK << 11);
 	if (usb_pipein (pipe))
 		clear->devinfo |= 1 << 15;
-	
+
+	/* info for completion callback */
+	clear->hcd = bus_to_hcd(udev->bus);
+	clear->ep = urb->ep;
+
 	/* tell keventd to clear state for this TT */
 	spin_lock_irqsave (&tt->lock, flags);
 	list_add_tail (&clear->clear_list, &tt->clear_list);
-	schedule_work (&tt->kevent);
+	schedule_work(&tt->clear_work);
 	spin_unlock_irqrestore (&tt->lock, flags);
+	return 0;
 }
-EXPORT_SYMBOL_GPL(usb_hub_tt_clear_buffer);
+EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer);
 
 /* If do_delay is false, return the number of milliseconds the caller
  * needs to delay.
@@ -818,7 +830,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
 	if (hub->has_indicators)
 		cancel_delayed_work_sync(&hub->leds);
 	if (hub->tt.hub)
-		cancel_work_sync(&hub->tt.kevent);
+		cancel_work_sync(&hub->tt.clear_work);
 }
 
 /* caller has locked the hub device */
@@ -935,7 +947,7 @@ static int hub_configure(struct usb_hub *hub,
 
 	spin_lock_init (&hub->tt.lock);
 	INIT_LIST_HEAD (&hub->tt.clear_list);
-	INIT_WORK (&hub->tt.kevent, hub_tt_kevent);
+	INIT_WORK(&hub->tt.clear_work, hub_tt_work);
 	switch (hdev->descriptor.bDeviceProtocol) {
 		case 0:
 			break;
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 889c0f32a40..de8081f065e 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -188,16 +188,18 @@ struct usb_tt {
 	/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
 	spinlock_t		lock;
 	struct list_head	clear_list;	/* of usb_tt_clear */
-	struct work_struct			kevent;
+	struct work_struct	clear_work;
 };
 
 struct usb_tt_clear {
 	struct list_head	clear_list;
 	unsigned		tt;
 	u16			devinfo;
+	struct usb_hcd		*hcd;
+	struct usb_host_endpoint	*ep;
 };
 
-extern void usb_hub_tt_clear_buffer(struct usb_device *dev, int pipe);
+extern int usb_hub_clear_tt_buffer(struct urb *urb);
 extern void usb_ep0_reinit(struct usb_device *);
 
 #endif /* __LINUX_HUB_H */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 2bed83caacb..9720e699f47 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -806,6 +806,48 @@ static int usb_string_sub(struct usb_device *dev, unsigned int langid,
 	return rc;
 }
 
+static int usb_get_langid(struct usb_device *dev, unsigned char *tbuf)
+{
+	int err;
+
+	if (dev->have_langid)
+		return 0;
+
+	if (dev->string_langid < 0)
+		return -EPIPE;
+
+	err = usb_string_sub(dev, 0, 0, tbuf);
+
+	/* If the string was reported but is malformed, default to english
+	 * (0x0409) */
+	if (err == -ENODATA || (err > 0 && err < 4)) {
+		dev->string_langid = 0x0409;
+		dev->have_langid = 1;
+		dev_err(&dev->dev,
+			"string descriptor 0 malformed (err = %d), "
+			"defaulting to 0x%04x\n",
+				err, dev->string_langid);
+		return 0;
+	}
+
+	/* In case of all other errors, we assume the device is not able to
+	 * deal with strings at all. Set string_langid to -1 in order to
+	 * prevent any string to be retrieved from the device */
+	if (err < 0) {
+		dev_err(&dev->dev, "string descriptor 0 read error: %d\n",
+					err);
+		dev->string_langid = -1;
+		return -EPIPE;
+	}
+
+	/* always use the first langid listed */
+	dev->string_langid = tbuf[2] | (tbuf[3] << 8);
+	dev->have_langid = 1;
+	dev_dbg(&dev->dev, "default language 0x%04x\n",
+				dev->string_langid);
+	return 0;
+}
+
 /**
  * usb_string - returns UTF-8 version of a string descriptor
  * @dev: the device whose string descriptor is being retrieved
@@ -837,24 +879,9 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
 	if (!tbuf)
 		return -ENOMEM;
 
-	/* get langid for strings if it's not yet known */
-	if (!dev->have_langid) {
-		err = usb_string_sub(dev, 0, 0, tbuf);
-		if (err < 0) {
-			dev_err(&dev->dev,
-				"string descriptor 0 read error: %d\n",
-				err);
-		} else if (err < 4) {
-			dev_err(&dev->dev, "string descriptor 0 too short\n");
-		} else {
-			dev->string_langid = tbuf[2] | (tbuf[3] << 8);
-			/* always use the first langid listed */
-			dev_dbg(&dev->dev, "default language 0x%04x\n",
-				dev->string_langid);
-		}
-
-		dev->have_langid = 1;
-	}
+	err = usb_get_langid(dev, tbuf);
+	if (err < 0)
+		goto errout;
 
 	err = usb_string_sub(dev, dev->string_langid, index, tbuf);
 	if (err < 0)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 5d1ddf485d1..7f8e83a954a 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -286,6 +286,27 @@ config USB_S3C_HSOTG
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_GADGET_IMX
+	boolean "Freescale IMX USB Peripheral Controller"
+	depends on ARCH_MX1
+	help
+	   Freescale's IMX series include an integrated full speed
+	   USB 1.1 device controller.  The controller in the IMX series
+	   is register-compatible.
+
+	   It has Six fixed-function endpoints, as well as endpoint
+	   zero (for control transfers).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "imx_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_IMX
+	tristate
+	depends on USB_GADGET_IMX
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 config USB_GADGET_S3C2410
 	boolean "S3C2410 USB Device Controller"
 	depends on ARCH_S3C2410
@@ -321,27 +342,6 @@ config USB_GADGET_MUSB_HDRC
 	  This OTG-capable silicon IP is used in dual designs including
 	  the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
 
-config USB_GADGET_IMX
-	boolean "Freescale IMX USB Peripheral Controller"
-	depends on ARCH_MX1
-	help
-	   Freescale's IMX series include an integrated full speed
-	   USB 1.1 device controller.  The controller in the IMX series
-	   is register-compatible.
-
-	   It has Six fixed-function endpoints, as well as endpoint
-	   zero (for control transfers).
-
-	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "imx_udc" and force all
-	   gadget drivers to also be dynamically linked.
-
-config USB_IMX
-	tristate
-	depends on USB_GADGET_IMX
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
 config USB_GADGET_M66592
 	boolean "Renesas M66592 USB Peripheral Controller"
 	select USB_GADGET_DUALSPEED
@@ -604,6 +604,7 @@ config USB_ZERO_HNPTEST
 config USB_AUDIO
 	tristate "Audio Gadget (EXPERIMENTAL)"
 	depends on SND
+	select SND_PCM
 	help
 	  Gadget Audio is compatible with USB Audio Class specification 1.0.
 	  It will include at least one AudioControl interface, zero or more
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 826f3adde5d..77352ccc245 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -48,7 +48,6 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/timer.h>
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 94de7e86461..9f80f4e970b 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -42,9 +42,9 @@
  * Instead:  allocate your own, using normal USB-IF procedures.
  */
 
-/* Thanks to NetChip Technologies for donating this product ID. */
-#define AUDIO_VENDOR_NUM		0x0525	/* NetChip */
-#define AUDIO_PRODUCT_NUM		0xa4a1	/* Linux-USB Audio Gadget */
+/* Thanks to Linux Foundation for donating this product ID. */
+#define AUDIO_VENDOR_NUM		0x1d6b	/* Linux Foundation */
+#define AUDIO_PRODUCT_NUM		0x0101	/* Linux-USB Audio Gadget */
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index d006dc652e0..bd102f5052b 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -293,15 +293,16 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 		/* CDC Subset */
 		eth_config_driver.label = "CDC Subset/SAFE";
 
-		device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM),
-		device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM),
-		device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+		device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM);
+		device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM);
+		if (!has_rndis())
+			device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
 	}
 
 	if (has_rndis()) {
 		/* RNDIS plus ECM-or-Subset */
-		device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM),
-		device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM),
+		device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM);
+		device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM);
 		device_desc.bNumConfigurations = 2;
 	}
 
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 6829d596135..a3913519fd5 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -34,7 +34,6 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/timer.h>
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 0ce4e281984..ed21e263f83 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -139,7 +139,7 @@ static int is_vbus_present(void)
 {
 	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
 
-	if (mach->gpio_vbus) {
+	if (gpio_is_valid(mach->gpio_vbus)) {
 		int value = gpio_get_value(mach->gpio_vbus);
 
 		if (mach->gpio_vbus_inverted)
@@ -158,7 +158,7 @@ static void pullup_off(void)
 	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
 	int off_level = mach->gpio_pullup_inverted;
 
-	if (mach->gpio_pullup)
+	if (gpio_is_valid(mach->gpio_pullup))
 		gpio_set_value(mach->gpio_pullup, off_level);
 	else if (mach->udc_command)
 		mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
@@ -169,7 +169,7 @@ static void pullup_on(void)
 	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
 	int on_level = !mach->gpio_pullup_inverted;
 
-	if (mach->gpio_pullup)
+	if (gpio_is_valid(mach->gpio_pullup))
 		gpio_set_value(mach->gpio_pullup, on_level);
 	else if (mach->udc_command)
 		mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
@@ -1000,7 +1000,7 @@ static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active)
 	udc = container_of(_gadget, struct pxa25x_udc, gadget);
 
 	/* not all boards support pullup control */
-	if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+	if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
 		return -EOPNOTSUPP;
 
 	udc->pullup = (is_active != 0);
@@ -1802,11 +1802,13 @@ pxa25x_udc_irq(int irq, void *_dev)
 					USIR0 |= tmp;
 					handled = 1;
 				}
+#ifndef	CONFIG_USB_PXA25X_SMALL
 				if (usir1 & tmp) {
 					handle_ep(&dev->ep[i+8]);
 					USIR1 |= tmp;
 					handled = 1;
 				}
+#endif
 			}
 		}
 
@@ -2160,7 +2162,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	dev->dev = &pdev->dev;
 	dev->mach = pdev->dev.platform_data;
 
-	if (dev->mach->gpio_vbus) {
+	if (gpio_is_valid(dev->mach->gpio_vbus)) {
 		if ((retval = gpio_request(dev->mach->gpio_vbus,
 				"pxa25x_udc GPIO VBUS"))) {
 			dev_dbg(&pdev->dev,
@@ -2173,7 +2175,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	} else
 		vbus_irq = 0;
 
-	if (dev->mach->gpio_pullup) {
+	if (gpio_is_valid(dev->mach->gpio_pullup)) {
 		if ((retval = gpio_request(dev->mach->gpio_pullup,
 				"pca25x_udc GPIO PULLUP"))) {
 			dev_dbg(&pdev->dev,
@@ -2256,10 +2258,10 @@ lubbock_fail0:
 #endif
 	free_irq(irq, dev);
  err_irq1:
-	if (dev->mach->gpio_pullup)
+	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
  err_gpio_pullup:
-	if (dev->mach->gpio_vbus)
+	if (gpio_is_valid(dev->mach->gpio_vbus))
 		gpio_free(dev->mach->gpio_vbus);
  err_gpio_vbus:
 	clk_put(dev->clk);
@@ -2294,11 +2296,11 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
 		free_irq(LUBBOCK_USB_IRQ, dev);
 	}
 #endif
-	if (dev->mach->gpio_vbus) {
+	if (gpio_is_valid(dev->mach->gpio_vbus)) {
 		free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev);
 		gpio_free(dev->mach->gpio_vbus);
 	}
-	if (dev->mach->gpio_pullup)
+	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
 
 	clk_put(dev->clk);
@@ -2329,7 +2331,7 @@ static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state)
 	struct pxa25x_udc	*udc = platform_get_drvdata(dev);
 	unsigned long flags;
 
-	if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+	if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
 		WARNING("USB host won't detect disconnect!\n");
 	udc->suspended = 1;
 
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 2b4660e08c4..ca41b0b5afb 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -442,6 +442,8 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 
 	case OID_802_3_MAC_OPTIONS:
 		pr_debug("%s: OID_802_3_MAC_OPTIONS\n", __func__);
+		*outbuf = cpu_to_le32(0);
+		retval = 0;
 		break;
 
 	/* ieee802.3 statistics OIDs (table 4-4) */
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 9a2b8920532..e7739a605c6 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -28,7 +28,6 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/timer.h>
@@ -843,6 +842,7 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
 	u32			ep_csr1;
 	u32			idx;
 
+handle_ep_again:
 	if (likely (!list_empty(&ep->queue)))
 		req = list_entry(ep->queue.next,
 				struct s3c2410_request, queue);
@@ -882,6 +882,8 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
 
 		if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) {
 			s3c2410_udc_read_fifo(ep,req);
+			if (s3c2410_udc_fifo_count_out())
+				goto handle_ep_again;
 		}
 	}
 }
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1576a0520ad..1a920c70b5a 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -181,26 +181,27 @@ config USB_OHCI_HCD_PPC_SOC
 	  Enables support for the USB controller on the MPC52xx or
 	  STB03xxx processor chip.  If unsure, say Y.
 
-config USB_OHCI_HCD_PPC_OF
-	bool "OHCI support for PPC USB controller on OF platform bus"
-	depends on USB_OHCI_HCD && PPC_OF
-	default y
-	---help---
-	  Enables support for the USB controller PowerPC present on the
-	  OpenFirmware platform bus.
-
 config USB_OHCI_HCD_PPC_OF_BE
-	bool "Support big endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default y
+	bool "OHCI support for OF platform bus (big endian)"
+	depends on USB_OHCI_HCD && PPC_OF
 	select USB_OHCI_BIG_ENDIAN_DESC
 	select USB_OHCI_BIG_ENDIAN_MMIO
+	---help---
+	  Enables support for big-endian USB controllers present on the
+	  OpenFirmware platform bus.
 
 config USB_OHCI_HCD_PPC_OF_LE
-	bool "Support little endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default n
+	bool "OHCI support for OF platform bus (little endian)"
+	depends on USB_OHCI_HCD && PPC_OF
 	select USB_OHCI_LITTLE_ENDIAN
+	---help---
+	  Enables support for little-endian USB controllers present on the
+	  OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF
+	bool
+	depends on USB_OHCI_HCD && PPC_OF
+	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
 
 config USB_OHCI_HCD_PCI
 	bool "OHCI support for PCI-bus USB controllers"
@@ -337,10 +338,10 @@ config USB_R8A66597_HCD
 
 config SUPERH_ON_CHIP_R8A66597
 	boolean "Enable SuperH on-chip R8A66597 USB"
-	depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
+	depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724)
 	help
 	   This driver enables support for the on-chip R8A66597 in the
-	   SH7366 and SH7723 processors.
+	   SH7366, SH7723 and SH7724 processors.
 
 config USB_WHCI_HCD
 	tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index c3a778bd359..59d208d94d4 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -113,6 +113,8 @@ static const struct hc_driver ehci_au1xxx_hc_driver = {
 	.bus_resume		= ehci_bus_resume,
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
 static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index bf86809c512..991174937db 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -325,6 +325,8 @@ static const struct hc_driver ehci_fsl_hc_driver = {
 	.bus_resume = ehci_bus_resume,
 	.relinquish_port = ehci_relinquish_port,
 	.port_handed_over = ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
 static int ehci_fsl_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 2b72473544d..11c627ce602 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -903,7 +903,8 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 			/* already started */
 			break;
 		case QH_STATE_IDLE:
-			WARN_ON(1);
+			/* QH might be waiting for a Clear-TT-Buffer */
+			qh_completions(ehci, qh);
 			break;
 		}
 		break;
@@ -1003,6 +1004,8 @@ idle_timeout:
 		schedule_timeout_uninterruptible(1);
 		goto rescan;
 	case QH_STATE_IDLE:		/* fully unlinked */
+		if (qh->clearing_tt)
+			goto idle_timeout;
 		if (list_empty (&qh->qtd_list)) {
 			qh_put (qh);
 			break;
@@ -1030,12 +1033,14 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	struct ehci_qh		*qh;
 	int			eptype = usb_endpoint_type(&ep->desc);
+	int			epnum = usb_endpoint_num(&ep->desc);
+	int			is_out = usb_endpoint_dir_out(&ep->desc);
+	unsigned long		flags;
 
 	if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
 		return;
 
- rescan:
-	spin_lock_irq(&ehci->lock);
+	spin_lock_irqsave(&ehci->lock, flags);
 	qh = ep->hcpriv;
 
 	/* For Bulk and Interrupt endpoints we maintain the toggle state
@@ -1044,29 +1049,24 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 	 * the toggle bit in the QH.
 	 */
 	if (qh) {
+		usb_settoggle(qh->dev, epnum, is_out, 0);
 		if (!list_empty(&qh->qtd_list)) {
 			WARN_ONCE(1, "clear_halt for a busy endpoint\n");
-		} else if (qh->qh_state == QH_STATE_IDLE) {
-			qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
-		} else {
-			/* It's not safe to write into the overlay area
-			 * while the QH is active.  Unlink it first and
-			 * wait for the unlink to complete.
+		} else if (qh->qh_state == QH_STATE_LINKED) {
+
+			/* The toggle value in the QH can't be updated
+			 * while the QH is active.  Unlink it now;
+			 * re-linking will call qh_refresh().
 			 */
-			if (qh->qh_state == QH_STATE_LINKED) {
-				if (eptype == USB_ENDPOINT_XFER_BULK) {
-					unlink_async(ehci, qh);
-				} else {
-					intr_deschedule(ehci, qh);
-					(void) qh_schedule(ehci, qh);
-				}
+			if (eptype == USB_ENDPOINT_XFER_BULK) {
+				unlink_async(ehci, qh);
+			} else {
+				intr_deschedule(ehci, qh);
+				(void) qh_schedule(ehci, qh);
 			}
-			spin_unlock_irq(&ehci->lock);
-			schedule_timeout_uninterruptible(1);
-			goto rescan;
 		}
 	}
-	spin_unlock_irq(&ehci->lock);
+	spin_unlock_irqrestore(&ehci->lock, flags);
 }
 
 static int ehci_get_frame (struct usb_hcd *hcd)
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
index a44bb4a9495..89b7c70c6ed 100644
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ b/drivers/usb/host/ehci-ixp4xx.c
@@ -61,6 +61,8 @@ static const struct hc_driver ixp4xx_ehci_hc_driver = {
 #endif
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
 static int ixp4xx_ehci_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 770dd9aba62..1d283e1b2b8 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -105,6 +105,7 @@ static int ehci_orion_setup(struct usb_hcd *hcd)
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	int retval;
 
+	ehci_reset(ehci);
 	retval = ehci_halt(ehci);
 	if (retval)
 		return retval;
@@ -118,7 +119,6 @@ static int ehci_orion_setup(struct usb_hcd *hcd)
 
 	hcd->has_tt = 1;
 
-	ehci_reset(ehci);
 	ehci_port_power(ehci, 0);
 
 	return retval;
@@ -165,6 +165,8 @@ static const struct hc_driver ehci_orion_hc_driver = {
 	.bus_resume = ehci_bus_resume,
 	.relinquish_port = ehci_relinquish_port,
 	.port_handed_over = ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
 static void __init
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index f3683e1da16..c2f1b7df918 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -404,6 +404,8 @@ static const struct hc_driver ehci_pci_hc_driver = {
 	.bus_resume =		ehci_bus_resume,
 	.relinquish_port =	ehci_relinquish_port,
 	.port_handed_over =	ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index fbd272288fc..36f96da129f 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -79,6 +79,8 @@ static const struct hc_driver ehci_ppc_of_hc_driver = {
 #endif
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
 
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 93f7035d00a..1dee33b9139 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -75,6 +75,8 @@ static const struct hc_driver ps3_ehci_hc_driver = {
 #endif
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
 static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev)
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 3192f683f80..7673554fa64 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -93,6 +93,22 @@ qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
 	qh->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
 	qh->hw_alt_next = EHCI_LIST_END(ehci);
 
+	/* Except for control endpoints, we make hardware maintain data
+	 * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
+	 * and set the pseudo-toggle in udev. Only usb_clear_halt() will
+	 * ever clear it.
+	 */
+	if (!(qh->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
+		unsigned	is_out, epnum;
+
+		is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8));
+		epnum = (hc32_to_cpup(ehci, &qh->hw_info1) >> 8) & 0x0f;
+		if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
+			qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
+			usb_settoggle (qh->dev, epnum, is_out, 1);
+		}
+	}
+
 	/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
 	wmb ();
 	qh->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
@@ -123,6 +139,55 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 /*-------------------------------------------------------------------------*/
 
+static void qh_link_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
+
+static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd,
+		struct usb_host_endpoint *ep)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	struct ehci_qh		*qh = ep->hcpriv;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&ehci->lock, flags);
+	qh->clearing_tt = 0;
+	if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
+			&& HC_IS_RUNNING(hcd->state))
+		qh_link_async(ehci, qh);
+	spin_unlock_irqrestore(&ehci->lock, flags);
+}
+
+static void ehci_clear_tt_buffer(struct ehci_hcd *ehci, struct ehci_qh *qh,
+		struct urb *urb, u32 token)
+{
+
+	/* If an async split transaction gets an error or is unlinked,
+	 * the TT buffer may be left in an indeterminate state.  We
+	 * have to clear the TT buffer.
+	 *
+	 * Note: this routine is never called for Isochronous transfers.
+	 */
+	if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) {
+#ifdef DEBUG
+		struct usb_device *tt = urb->dev->tt->hub;
+		dev_dbg(&tt->dev,
+			"clear tt buffer port %d, a%d ep%d t%08x\n",
+			urb->dev->ttport, urb->dev->devnum,
+			usb_pipeendpoint(urb->pipe), token);
+#endif /* DEBUG */
+		if (!ehci_is_TDI(ehci)
+				|| urb->dev->tt->hub !=
+				   ehci_to_hcd(ehci)->self.root_hub) {
+			if (usb_hub_clear_tt_buffer(urb) == 0)
+				qh->clearing_tt = 1;
+		} else {
+
+			/* REVISIT ARC-derived cores don't clear the root
+			 * hub TT buffer in this way...
+			 */
+		}
+	}
+}
+
 static int qtd_copy_status (
 	struct ehci_hcd *ehci,
 	struct urb *urb,
@@ -149,6 +214,14 @@ static int qtd_copy_status (
 		if (token & QTD_STS_BABBLE) {
 			/* FIXME "must" disable babbling device's port too */
 			status = -EOVERFLOW;
+		/* CERR nonzero + halt --> stall */
+		} else if (QTD_CERR(token)) {
+			status = -EPIPE;
+
+		/* In theory, more than one of the following bits can be set
+		 * since they are sticky and the transaction is retried.
+		 * Which to test first is rather arbitrary.
+		 */
 		} else if (token & QTD_STS_MMF) {
 			/* fs/ls interrupt xfer missed the complete-split */
 			status = -EPROTO;
@@ -157,21 +230,15 @@ static int qtd_copy_status (
 				? -ENOSR  /* hc couldn't read data */
 				: -ECOMM; /* hc couldn't write data */
 		} else if (token & QTD_STS_XACT) {
-			/* timeout, bad crc, wrong PID, etc; retried */
-			if (QTD_CERR (token))
-				status = -EPIPE;
-			else {
-				ehci_dbg (ehci, "devpath %s ep%d%s 3strikes\n",
-					urb->dev->devpath,
-					usb_pipeendpoint (urb->pipe),
-					usb_pipein (urb->pipe) ? "in" : "out");
-				status = -EPROTO;
-			}
-		/* CERR nonzero + no errors + halt --> stall */
-		} else if (QTD_CERR (token))
-			status = -EPIPE;
-		else	/* unknown */
+			/* timeout, bad CRC, wrong PID, etc */
+			ehci_dbg(ehci, "devpath %s ep%d%s 3strikes\n",
+				urb->dev->devpath,
+				usb_pipeendpoint(urb->pipe),
+				usb_pipein(urb->pipe) ? "in" : "out");
 			status = -EPROTO;
+		} else {	/* unknown */
+			status = -EPROTO;
+		}
 
 		ehci_vdbg (ehci,
 			"dev%d ep%d%s qtd token %08x --> status %d\n",
@@ -179,28 +246,6 @@ static int qtd_copy_status (
 			usb_pipeendpoint (urb->pipe),
 			usb_pipein (urb->pipe) ? "in" : "out",
 			token, status);
-
-		/* if async CSPLIT failed, try cleaning out the TT buffer */
-		if (status != -EPIPE
-				&& urb->dev->tt
-				&& !usb_pipeint(urb->pipe)
-				&& ((token & QTD_STS_MMF) != 0
-					|| QTD_CERR(token) == 0)
-				&& (!ehci_is_TDI(ehci)
-			                || urb->dev->tt->hub !=
-					   ehci_to_hcd(ehci)->self.root_hub)) {
-#ifdef DEBUG
-			struct usb_device *tt = urb->dev->tt->hub;
-			dev_dbg (&tt->dev,
-				"clear tt buffer port %d, a%d ep%d t%08x\n",
-				urb->dev->ttport, urb->dev->devnum,
-				usb_pipeendpoint (urb->pipe), token);
-#endif /* DEBUG */
-			/* REVISIT ARC-derived cores don't clear the root
-			 * hub TT buffer in this way...
-			 */
-			usb_hub_tt_clear_buffer (urb->dev, urb->pipe);
-		}
 	}
 
 	return status;
@@ -330,12 +375,11 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 				 */
 				if ((token & QTD_STS_XACT) &&
 						QTD_CERR(token) == 0 &&
-						--qh->xacterrs > 0 &&
+						++qh->xacterrs < QH_XACTERR_MAX &&
 						!urb->unlinked) {
 					ehci_dbg(ehci,
 	"detected XactErr len %zu/%zu retry %d\n",
-	qtd->length - QTD_LENGTH(token), qtd->length,
-	QH_XACTERR_MAX - qh->xacterrs);
+	qtd->length - QTD_LENGTH(token), qtd->length, qh->xacterrs);
 
 					/* reset the token in the qtd and the
 					 * qh overlay (which still contains
@@ -391,9 +435,16 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			/* qh unlinked; token in overlay may be most current */
 			if (state == QH_STATE_IDLE
 					&& cpu_to_hc32(ehci, qtd->qtd_dma)
-						== qh->hw_current)
+						== qh->hw_current) {
 				token = hc32_to_cpu(ehci, qh->hw_token);
 
+				/* An unlink may leave an incomplete
+				 * async transaction in the TT buffer.
+				 * We have to clear it.
+				 */
+				ehci_clear_tt_buffer(ehci, qh, urb, token);
+			}
+
 			/* force halt for unlinked or blocked qh, so we'll
 			 * patch the qh later and so that completions can't
 			 * activate it while we "know" it's stopped.
@@ -419,6 +470,13 @@ halt:
 					&& (qtd->hw_alt_next
 						& EHCI_LIST_END(ehci)))
 				last_status = -EINPROGRESS;
+
+			/* As part of low/full-speed endpoint-halt processing
+			 * we must clear the TT buffer (11.17.5).
+			 */
+			if (unlikely(last_status != -EINPROGRESS &&
+					last_status != -EREMOTEIO))
+				ehci_clear_tt_buffer(ehci, qh, urb, token);
 		}
 
 		/* if we're removing something not at the queue head,
@@ -435,7 +493,7 @@ halt:
 		last = qtd;
 
 		/* reinit the xacterr counter for the next qtd */
-		qh->xacterrs = QH_XACTERR_MAX;
+		qh->xacterrs = 0;
 	}
 
 	/* last urb's completion might still need calling */
@@ -834,6 +892,7 @@ done:
 	qh->qh_state = QH_STATE_IDLE;
 	qh->hw_info1 = cpu_to_hc32(ehci, info1);
 	qh->hw_info2 = cpu_to_hc32(ehci, info2);
+	usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
 	qh_refresh (ehci, qh);
 	return qh;
 }
@@ -847,6 +906,10 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	__hc32		dma = QH_NEXT(ehci, qh->qh_dma);
 	struct ehci_qh	*head;
 
+	/* Don't link a QH if there's a Clear-TT-Buffer pending */
+	if (unlikely(qh->clearing_tt))
+		return;
+
 	/* (re)start the async schedule? */
 	head = ehci->async;
 	timer_action_done (ehci, TIMER_ASYNC_OFF);
@@ -864,7 +927,7 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		}
 	}
 
-	/* clear halt and maybe recover from silicon quirk */
+	/* clear halt and/or toggle; and maybe recover from silicon quirk */
 	if (qh->qh_state == QH_STATE_IDLE)
 		qh_refresh (ehci, qh);
 
@@ -876,7 +939,8 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	head->qh_next.qh = qh;
 	head->hw_next = dma;
 
-	qh->xacterrs = QH_XACTERR_MAX;
+	qh_get(qh);
+	qh->xacterrs = 0;
 	qh->qh_state = QH_STATE_LINKED;
 	/* qtd completions reported later by interrupt */
 }
@@ -1016,7 +1080,7 @@ submit_async (
 	 * the HC and TT handle it when the TT has a buffer ready.
 	 */
 	if (likely (qh->qh_state == QH_STATE_IDLE))
-		qh_link_async (ehci, qh_get (qh));
+		qh_link_async(ehci, qh);
  done:
 	spin_unlock_irqrestore (&ehci->lock, flags);
 	if (unlikely (qh == NULL))
@@ -1051,8 +1115,6 @@ static void end_unlink_async (struct ehci_hcd *ehci)
 			&& HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
 		qh_link_async (ehci, qh);
 	else {
-		qh_put (qh);		// refcount from async list
-
 		/* it's not free to turn the async schedule on/off; leave it
 		 * active but idle for a while once it empties.
 		 */
@@ -1060,6 +1122,7 @@ static void end_unlink_async (struct ehci_hcd *ehci)
 				&& ehci->async->qh_next.qh == NULL)
 			timer_action (ehci, TIMER_ASYNC_OFF);
 	}
+	qh_put(qh);			/* refcount from async list */
 
 	if (next) {
 		ehci->reclaim = NULL;
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 9d1babc7ff6..edd61ee9032 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -542,6 +542,7 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		}
 	}
 	qh->qh_state = QH_STATE_LINKED;
+	qh->xacterrs = 0;
 	qh_get (qh);
 
 	/* update per-qh bandwidth for usbfs */
@@ -1619,11 +1620,14 @@ itd_complete (
 				desc->status = -EPROTO;
 
 			/* HC need not update length with this error */
-			if (!(t & EHCI_ISOC_BABBLE))
-				desc->actual_length = EHCI_ITD_LENGTH (t);
+			if (!(t & EHCI_ISOC_BABBLE)) {
+				desc->actual_length = EHCI_ITD_LENGTH(t);
+				urb->actual_length += desc->actual_length;
+			}
 		} else if (likely ((t & EHCI_ISOC_ACTIVE) == 0)) {
 			desc->status = 0;
-			desc->actual_length = EHCI_ITD_LENGTH (t);
+			desc->actual_length = EHCI_ITD_LENGTH(t);
+			urb->actual_length += desc->actual_length;
 		} else {
 			/* URB was too late */
 			desc->status = -EXDEV;
@@ -2014,7 +2018,8 @@ sitd_complete (
 			desc->status = -EPROTO;
 	} else {
 		desc->status = 0;
-		desc->actual_length = desc->length - SITD_LENGTH (t);
+		desc->actual_length = desc->length - SITD_LENGTH(t);
+		urb->actual_length += desc->actual_length;
 	}
 	stream->depth -= stream->interval << 3;
 
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 90ad3395bb2..2bfff30f470 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -354,7 +354,9 @@ struct ehci_qh {
 	unsigned short		period;		/* polling interval */
 	unsigned short		start;		/* where polling starts */
 #define NO_FRAME ((unsigned short)~0)			/* pick new start */
+
 	struct usb_device	*dev;		/* access to TT */
+	unsigned		clearing_tt:1;	/* Clear-TT-Buf in progress */
 } __attribute__ ((aligned (32)));
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index bb63b68ddb7..62a226b6167 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -576,9 +576,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd)
 			out_be16(&usb->fhci->regs->usb_event,
 				 usb->saved_msk);
 		} else if (usb->port_status == FHCI_PORT_DISABLED) {
-			if (fhci_ioports_check_bus_state(fhci) == 1 &&
-					usb->port_status != FHCI_PORT_LOW &&
-					usb->port_status != FHCI_PORT_FULL)
+			if (fhci_ioports_check_bus_state(fhci) == 1)
 				fhci_device_connected_interrupt(fhci);
 		}
 		usb_er &= ~USB_E_RESET_MASK;
@@ -605,9 +603,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd)
 	}
 
 	if (usb_er & USB_E_IDLE_MASK) {
-		if (usb->port_status == FHCI_PORT_DISABLED &&
-				usb->port_status != FHCI_PORT_LOW &&
-				usb->port_status != FHCI_PORT_FULL) {
+		if (usb->port_status == FHCI_PORT_DISABLED) {
 			usb_er &= ~USB_E_RESET_MASK;
 			fhci_device_connected_interrupt(fhci);
 		} else if (usb->port_status ==
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 3fa3a170279..d4feebfc63b 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -361,7 +361,7 @@ static int __devexit isp1760_plat_remove(struct platform_device *pdev)
 
 static struct platform_driver isp1760_plat_driver = {
 	.probe	= isp1760_plat_probe,
-	.remove	= isp1760_plat_remove,
+	.remove	= __devexit_p(isp1760_plat_remove),
 	.driver	= {
 		.name	= "isp1760",
 	},
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index f3aaba35e91..83cbecd2a1e 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -282,6 +282,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 static void ohci_omap_stop(struct usb_hcd *hcd)
 {
 	dev_dbg(hcd->self.controller, "stopping USB Controller\n");
+	ohci_stop(hcd);
 	omap_ohci_clock_power(0);
 }
 
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 56976cc0352..e18f74946e6 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -26,7 +26,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/timer.h>
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 2501c571f85..705e3432415 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -173,6 +173,7 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int
 {
 	void *addr;
 	u32 temp;
+	u64 temp_64;
 
 	addr = &ir_set->irq_pending;
 	temp = xhci_readl(xhci, addr);
@@ -200,25 +201,15 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int
 		xhci_dbg(xhci, "  WARN: %p: ir_set.rsvd = 0x%x\n",
 				addr, (unsigned int)temp);
 
-	addr = &ir_set->erst_base[0];
-	temp = xhci_readl(xhci, addr);
-	xhci_dbg(xhci, "  %p: ir_set.erst_base[0] = 0x%x\n",
-			addr, (unsigned int) temp);
-
-	addr = &ir_set->erst_base[1];
-	temp = xhci_readl(xhci, addr);
-	xhci_dbg(xhci, "  %p: ir_set.erst_base[1] = 0x%x\n",
-			addr, (unsigned int) temp);
+	addr = &ir_set->erst_base;
+	temp_64 = xhci_read_64(xhci, addr);
+	xhci_dbg(xhci, "  %p: ir_set.erst_base = @%08llx\n",
+			addr, temp_64);
 
-	addr = &ir_set->erst_dequeue[0];
-	temp = xhci_readl(xhci, addr);
-	xhci_dbg(xhci, "  %p: ir_set.erst_dequeue[0] = 0x%x\n",
-			addr, (unsigned int) temp);
-
-	addr = &ir_set->erst_dequeue[1];
-	temp = xhci_readl(xhci, addr);
-	xhci_dbg(xhci, "  %p: ir_set.erst_dequeue[1] = 0x%x\n",
-			addr, (unsigned int) temp);
+	addr = &ir_set->erst_dequeue;
+	temp_64 = xhci_read_64(xhci, addr);
+	xhci_dbg(xhci, "  %p: ir_set.erst_dequeue = @%08llx\n",
+			addr, temp_64);
 }
 
 void xhci_print_run_regs(struct xhci_hcd *xhci)
@@ -268,8 +259,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
 		xhci_dbg(xhci, "Link TRB:\n");
 		xhci_print_trb_offsets(xhci, trb);
 
-		address = trb->link.segment_ptr[0] +
-			(((u64) trb->link.segment_ptr[1]) << 32);
+		address = trb->link.segment_ptr;
 		xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address);
 
 		xhci_dbg(xhci, "Interrupter target = 0x%x\n",
@@ -282,8 +272,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
 				(unsigned int) (trb->link.control & TRB_NO_SNOOP));
 		break;
 	case TRB_TYPE(TRB_TRANSFER):
-		address = trb->trans_event.buffer[0] +
-			(((u64) trb->trans_event.buffer[1]) << 32);
+		address = trb->trans_event.buffer;
 		/*
 		 * FIXME: look at flags to figure out if it's an address or if
 		 * the data is directly in the buffer field.
@@ -291,8 +280,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
 		xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address);
 		break;
 	case TRB_TYPE(TRB_COMPLETION):
-		address = trb->event_cmd.cmd_trb[0] +
-			(((u64) trb->event_cmd.cmd_trb[1]) << 32);
+		address = trb->event_cmd.cmd_trb;
 		xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
 		xhci_dbg(xhci, "Completion status = %u\n",
 				(unsigned int) GET_COMP_CODE(trb->event_cmd.status));
@@ -328,8 +316,8 @@ void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg)
 	for (i = 0; i < TRBS_PER_SEGMENT; ++i) {
 		trb = &seg->trbs[i];
 		xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n", addr,
-				(unsigned int) trb->link.segment_ptr[0],
-				(unsigned int) trb->link.segment_ptr[1],
+				lower_32_bits(trb->link.segment_ptr),
+				upper_32_bits(trb->link.segment_ptr),
 				(unsigned int) trb->link.intr_target,
 				(unsigned int) trb->link.control);
 		addr += sizeof(*trb);
@@ -386,8 +374,8 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
 		entry = &erst->entries[i];
 		xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n",
 				(unsigned int) addr,
-				(unsigned int) entry->seg_addr[0],
-				(unsigned int) entry->seg_addr[1],
+				lower_32_bits(entry->seg_addr),
+				upper_32_bits(entry->seg_addr),
 				(unsigned int) entry->seg_size,
 				(unsigned int) entry->rsvd);
 		addr += sizeof(*entry);
@@ -396,90 +384,147 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
 
 void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci)
 {
-	u32 val;
+	u64 val;
 
-	val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
-	xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = 0x%x\n", val);
-	val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[1]);
-	xhci_dbg(xhci, "// xHC command ring deq ptr high bits = 0x%x\n", val);
+	val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = @%08x\n",
+			lower_32_bits(val));
+	xhci_dbg(xhci, "// xHC command ring deq ptr high bits = @%08x\n",
+			upper_32_bits(val));
 }
 
-void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep)
+/* Print the last 32 bytes for 64-byte contexts */
+static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma)
+{
+	int i;
+	for (i = 0; i < 4; ++i) {
+		xhci_dbg(xhci, "@%p (virt) @%08llx "
+			 "(dma) %#08llx - rsvd64[%d]\n",
+			 &ctx[4 + i], (unsigned long long)dma,
+			 ctx[4 + i], i);
+		dma += 8;
+	}
+}
+
+void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
 {
-	int i, j;
-	int last_ep_ctx = 31;
 	/* Fields are 32 bits wide, DMA addresses are in bytes */
 	int field_size = 32 / 8;
+	int i;
 
-	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
-			&ctx->drop_flags, (unsigned long long)dma,
-			ctx->drop_flags);
-	dma += field_size;
-	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
-			&ctx->add_flags, (unsigned long long)dma,
-			ctx->add_flags);
-	dma += field_size;
-	for (i = 0; i > 6; ++i) {
-		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
-				&ctx->rsvd[i], (unsigned long long)dma,
-				ctx->rsvd[i], i);
-		dma += field_size;
-	}
+	struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+	dma_addr_t dma = ctx->dma + ((unsigned long)slot_ctx - (unsigned long)ctx);
+	int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
 
 	xhci_dbg(xhci, "Slot Context:\n");
 	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info\n",
-			&ctx->slot.dev_info,
-			(unsigned long long)dma, ctx->slot.dev_info);
+			&slot_ctx->dev_info,
+			(unsigned long long)dma, slot_ctx->dev_info);
 	dma += field_size;
 	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info2\n",
-			&ctx->slot.dev_info2,
-			(unsigned long long)dma, ctx->slot.dev_info2);
+			&slot_ctx->dev_info2,
+			(unsigned long long)dma, slot_ctx->dev_info2);
 	dma += field_size;
 	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tt_info\n",
-			&ctx->slot.tt_info,
-			(unsigned long long)dma, ctx->slot.tt_info);
+			&slot_ctx->tt_info,
+			(unsigned long long)dma, slot_ctx->tt_info);
 	dma += field_size;
 	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_state\n",
-			&ctx->slot.dev_state,
-			(unsigned long long)dma, ctx->slot.dev_state);
+			&slot_ctx->dev_state,
+			(unsigned long long)dma, slot_ctx->dev_state);
 	dma += field_size;
-	for (i = 0; i > 4; ++i) {
+	for (i = 0; i < 4; ++i) {
 		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
-				&ctx->slot.reserved[i], (unsigned long long)dma,
-				ctx->slot.reserved[i], i);
+				&slot_ctx->reserved[i], (unsigned long long)dma,
+				slot_ctx->reserved[i], i);
 		dma += field_size;
 	}
 
+	if (csz)
+		dbg_rsvd64(xhci, (u64 *)slot_ctx, dma);
+}
+
+void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
+		     struct xhci_container_ctx *ctx,
+		     unsigned int last_ep)
+{
+	int i, j;
+	int last_ep_ctx = 31;
+	/* Fields are 32 bits wide, DMA addresses are in bytes */
+	int field_size = 32 / 8;
+	int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
+
 	if (last_ep < 31)
 		last_ep_ctx = last_ep + 1;
 	for (i = 0; i < last_ep_ctx; ++i) {
+		struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i);
+		dma_addr_t dma = ctx->dma +
+			((unsigned long)ep_ctx - (unsigned long)ctx);
+
 		xhci_dbg(xhci, "Endpoint %02d Context:\n", i);
 		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",
-				&ctx->ep[i].ep_info,
-				(unsigned long long)dma, ctx->ep[i].ep_info);
+				&ep_ctx->ep_info,
+				(unsigned long long)dma, ep_ctx->ep_info);
 		dma += field_size;
 		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info2\n",
-				&ctx->ep[i].ep_info2,
-				(unsigned long long)dma, ctx->ep[i].ep_info2);
-		dma += field_size;
-		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[0]\n",
-				&ctx->ep[i].deq[0],
-				(unsigned long long)dma, ctx->ep[i].deq[0]);
-		dma += field_size;
-		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[1]\n",
-				&ctx->ep[i].deq[1],
-				(unsigned long long)dma, ctx->ep[i].deq[1]);
+				&ep_ctx->ep_info2,
+				(unsigned long long)dma, ep_ctx->ep_info2);
 		dma += field_size;
+		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08llx - deq\n",
+				&ep_ctx->deq,
+				(unsigned long long)dma, ep_ctx->deq);
+		dma += 2*field_size;
 		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tx_info\n",
-				&ctx->ep[i].tx_info,
-				(unsigned long long)dma, ctx->ep[i].tx_info);
+				&ep_ctx->tx_info,
+				(unsigned long long)dma, ep_ctx->tx_info);
 		dma += field_size;
 		for (j = 0; j < 3; ++j) {
 			xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
-					&ctx->ep[i].reserved[j],
+					&ep_ctx->reserved[j],
 					(unsigned long long)dma,
-					ctx->ep[i].reserved[j], j);
+					ep_ctx->reserved[j], j);
+			dma += field_size;
+		}
+
+		if (csz)
+			dbg_rsvd64(xhci, (u64 *)ep_ctx, dma);
+	}
+}
+
+void xhci_dbg_ctx(struct xhci_hcd *xhci,
+		  struct xhci_container_ctx *ctx,
+		  unsigned int last_ep)
+{
+	int i;
+	/* Fields are 32 bits wide, DMA addresses are in bytes */
+	int field_size = 32 / 8;
+	struct xhci_slot_ctx *slot_ctx;
+	dma_addr_t dma = ctx->dma;
+	int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
+
+	if (ctx->type == XHCI_CTX_TYPE_INPUT) {
+		struct xhci_input_control_ctx *ctrl_ctx =
+			xhci_get_input_control_ctx(xhci, ctx);
+		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
+			 &ctrl_ctx->drop_flags, (unsigned long long)dma,
+			 ctrl_ctx->drop_flags);
+		dma += field_size;
+		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
+			 &ctrl_ctx->add_flags, (unsigned long long)dma,
+			 ctrl_ctx->add_flags);
+		dma += field_size;
+		for (i = 0; i < 6; ++i) {
+			xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd2[%d]\n",
+				 &ctrl_ctx->rsvd2[i], (unsigned long long)dma,
+				 ctrl_ctx->rsvd2[i], i);
 			dma += field_size;
 		}
+
+		if (csz)
+			dbg_rsvd64(xhci, (u64 *)ctrl_ctx, dma);
 	}
+
+	slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+	xhci_dbg_slot_ctx(xhci, ctx);
+	xhci_dbg_ep_ctx(xhci, ctx, last_ep);
 }
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
index dba3e07ccd0..816c39caca1 100644
--- a/drivers/usb/host/xhci-hcd.c
+++ b/drivers/usb/host/xhci-hcd.c
@@ -103,7 +103,10 @@ int xhci_reset(struct xhci_hcd *xhci)
 	u32 state;
 
 	state = xhci_readl(xhci, &xhci->op_regs->status);
-	BUG_ON((state & STS_HALT) == 0);
+	if ((state & STS_HALT) == 0) {
+		xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
+		return 0;
+	}
 
 	xhci_dbg(xhci, "// Reset the HC\n");
 	command = xhci_readl(xhci, &xhci->op_regs->command);
@@ -226,6 +229,7 @@ int xhci_init(struct usb_hcd *hcd)
 static void xhci_work(struct xhci_hcd *xhci)
 {
 	u32 temp;
+	u64 temp_64;
 
 	/*
 	 * Clear the op reg interrupt status first,
@@ -248,9 +252,9 @@ static void xhci_work(struct xhci_hcd *xhci)
 	/* FIXME this should be a delayed service routine that clears the EHB */
 	xhci_handle_event(xhci);
 
-	/* Clear the event handler busy flag; the event ring should be empty. */
-	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
-	xhci_writel(xhci, temp & ~ERST_EHB, &xhci->ir_set->erst_dequeue[0]);
+	/* Clear the event handler busy flag (RW1C); the event ring should be empty. */
+	temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
 	/* Flush posted writes -- FIXME is this necessary? */
 	xhci_readl(xhci, &xhci->ir_set->irq_pending);
 }
@@ -266,19 +270,34 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	u32 temp, temp2;
+	union xhci_trb *trb;
 
 	spin_lock(&xhci->lock);
+	trb = xhci->event_ring->dequeue;
 	/* Check if the xHC generated the interrupt, or the irq is shared */
 	temp = xhci_readl(xhci, &xhci->op_regs->status);
 	temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+	if (temp == 0xffffffff && temp2 == 0xffffffff)
+		goto hw_died;
+
 	if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
 		spin_unlock(&xhci->lock);
 		return IRQ_NONE;
 	}
+	xhci_dbg(xhci, "op reg status = %08x\n", temp);
+	xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
+	xhci_dbg(xhci, "Event ring dequeue ptr:\n");
+	xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
+			(unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
+			lower_32_bits(trb->link.segment_ptr),
+			upper_32_bits(trb->link.segment_ptr),
+			(unsigned int) trb->link.intr_target,
+			(unsigned int) trb->link.control);
 
 	if (temp & STS_FATAL) {
 		xhci_warn(xhci, "WARNING: Host System Error\n");
 		xhci_halt(xhci);
+hw_died:
 		xhci_to_hcd(xhci)->state = HC_STATE_HALT;
 		spin_unlock(&xhci->lock);
 		return -ESHUTDOWN;
@@ -295,6 +314,7 @@ void xhci_event_ring_work(unsigned long arg)
 {
 	unsigned long flags;
 	int temp;
+	u64 temp_64;
 	struct xhci_hcd *xhci = (struct xhci_hcd *) arg;
 	int i, j;
 
@@ -311,9 +331,9 @@ void xhci_event_ring_work(unsigned long arg)
 	xhci_dbg(xhci, "Event ring:\n");
 	xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
 	xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
-	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
-	temp &= ERST_PTR_MASK;
-	xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
+	temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	temp_64 &= ~ERST_PTR_MASK;
+	xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
 	xhci_dbg(xhci, "Command ring:\n");
 	xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg);
 	xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
@@ -356,6 +376,7 @@ void xhci_event_ring_work(unsigned long arg)
 int xhci_run(struct usb_hcd *hcd)
 {
 	u32 temp;
+	u64 temp_64;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	void (*doorbell)(struct xhci_hcd *) = NULL;
 
@@ -382,6 +403,20 @@ int xhci_run(struct usb_hcd *hcd)
 	add_timer(&xhci->event_ring_timer);
 #endif
 
+	xhci_dbg(xhci, "Command ring memory map follows:\n");
+	xhci_debug_ring(xhci, xhci->cmd_ring);
+	xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+	xhci_dbg_cmd_ptrs(xhci);
+
+	xhci_dbg(xhci, "ERST memory map follows:\n");
+	xhci_dbg_erst(xhci, &xhci->erst);
+	xhci_dbg(xhci, "Event ring:\n");
+	xhci_debug_ring(xhci, xhci->event_ring);
+	xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+	temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	temp_64 &= ~ERST_PTR_MASK;
+	xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
+
 	xhci_dbg(xhci, "// Set the interrupt modulation register\n");
 	temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
 	temp &= ~ER_IRQ_INTERVAL_MASK;
@@ -406,22 +441,6 @@ int xhci_run(struct usb_hcd *hcd)
 	if (NUM_TEST_NOOPS > 0)
 		doorbell = xhci_setup_one_noop(xhci);
 
-	xhci_dbg(xhci, "Command ring memory map follows:\n");
-	xhci_debug_ring(xhci, xhci->cmd_ring);
-	xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
-	xhci_dbg_cmd_ptrs(xhci);
-
-	xhci_dbg(xhci, "ERST memory map follows:\n");
-	xhci_dbg_erst(xhci, &xhci->erst);
-	xhci_dbg(xhci, "Event ring:\n");
-	xhci_debug_ring(xhci, xhci->event_ring);
-	xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
-	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
-	temp &= ERST_PTR_MASK;
-	xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
-	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[1]);
-	xhci_dbg(xhci, "ERST deq upper = 0x%x\n", temp);
-
 	temp = xhci_readl(xhci, &xhci->op_regs->command);
 	temp |= (CMD_RUN);
 	xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
@@ -601,10 +620,13 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 		goto exit;
 	}
 	if (usb_endpoint_xfer_control(&urb->ep->desc))
-		ret = xhci_queue_ctrl_tx(xhci, mem_flags, urb,
+		/* We have a spinlock and interrupts disabled, so we must pass
+		 * atomic context to this function, which may allocate memory.
+		 */
+		ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
 				slot_id, ep_index);
 	else if (usb_endpoint_xfer_bulk(&urb->ep->desc))
-		ret = xhci_queue_bulk_tx(xhci, mem_flags, urb,
+		ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
 				slot_id, ep_index);
 	else
 		ret = -EINVAL;
@@ -661,8 +683,12 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 		goto done;
 
 	xhci_dbg(xhci, "Cancel URB %p\n", urb);
+	xhci_dbg(xhci, "Event ring:\n");
+	xhci_debug_ring(xhci, xhci->event_ring);
 	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
 	ep_ring = xhci->devs[urb->dev->slot_id]->ep_rings[ep_index];
+	xhci_dbg(xhci, "Endpoint ring:\n");
+	xhci_debug_ring(xhci, ep_ring);
 	td = (struct xhci_td *) urb->hcpriv;
 
 	ep_ring->cancels_pending++;
@@ -696,7 +722,9 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
 	struct xhci_hcd *xhci;
-	struct xhci_device_control *in_ctx;
+	struct xhci_container_ctx *in_ctx, *out_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_slot_ctx *slot_ctx;
 	unsigned int last_ctx;
 	unsigned int ep_index;
 	struct xhci_ep_ctx *ep_ctx;
@@ -724,31 +752,34 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	}
 
 	in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+	out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
 	ep_index = xhci_get_endpoint_index(&ep->desc);
-	ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
 	/* If the HC already knows the endpoint is disabled,
 	 * or the HCD has noted it is disabled, ignore this request
 	 */
 	if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED ||
-			in_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
+			ctrl_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
 		xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
 				__func__, ep);
 		return 0;
 	}
 
-	in_ctx->drop_flags |= drop_flag;
-	new_drop_flags = in_ctx->drop_flags;
+	ctrl_ctx->drop_flags |= drop_flag;
+	new_drop_flags = ctrl_ctx->drop_flags;
 
-	in_ctx->add_flags = ~drop_flag;
-	new_add_flags = in_ctx->add_flags;
+	ctrl_ctx->add_flags = ~drop_flag;
+	new_add_flags = ctrl_ctx->add_flags;
 
-	last_ctx = xhci_last_valid_endpoint(in_ctx->add_flags);
+	last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags);
+	slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
 	/* Update the last valid endpoint context, if we deleted the last one */
-	if ((in_ctx->slot.dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
-		in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
-		in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+	if ((slot_ctx->dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
+		slot_ctx->dev_info &= ~LAST_CTX_MASK;
+		slot_ctx->dev_info |= LAST_CTX(last_ctx);
 	}
-	new_slot_info = in_ctx->slot.dev_info;
+	new_slot_info = slot_ctx->dev_info;
 
 	xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
 
@@ -778,17 +809,22 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
 	struct xhci_hcd *xhci;
-	struct xhci_device_control *in_ctx;
+	struct xhci_container_ctx *in_ctx, *out_ctx;
 	unsigned int ep_index;
 	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_slot_ctx *slot_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
 	u32 added_ctxs;
 	unsigned int last_ctx;
 	u32 new_add_flags, new_drop_flags, new_slot_info;
 	int ret = 0;
 
 	ret = xhci_check_args(hcd, udev, ep, 1, __func__);
-	if (ret <= 0)
+	if (ret <= 0) {
+		/* So we won't queue a reset ep command for a root hub */
+		ep->hcpriv = NULL;
 		return ret;
+	}
 	xhci = hcd_to_xhci(hcd);
 
 	added_ctxs = xhci_get_endpoint_flag(&ep->desc);
@@ -810,12 +846,14 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	}
 
 	in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+	out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
 	ep_index = xhci_get_endpoint_index(&ep->desc);
-	ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
 	/* If the HCD has already noted the endpoint is enabled,
 	 * ignore this request.
 	 */
-	if (in_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
+	if (ctrl_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
 		xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
 				__func__, ep);
 		return 0;
@@ -833,8 +871,8 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 		return -ENOMEM;
 	}
 
-	in_ctx->add_flags |= added_ctxs;
-	new_add_flags = in_ctx->add_flags;
+	ctrl_ctx->add_flags |= added_ctxs;
+	new_add_flags = ctrl_ctx->add_flags;
 
 	/* If xhci_endpoint_disable() was called for this endpoint, but the
 	 * xHC hasn't been notified yet through the check_bandwidth() call,
@@ -842,14 +880,18 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	 * descriptors.  We must drop and re-add this endpoint, so we leave the
 	 * drop flags alone.
 	 */
-	new_drop_flags = in_ctx->drop_flags;
+	new_drop_flags = ctrl_ctx->drop_flags;
 
+	slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
 	/* Update the last valid endpoint context, if we just added one past */
-	if ((in_ctx->slot.dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
-		in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
-		in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+	if ((slot_ctx->dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
+		slot_ctx->dev_info &= ~LAST_CTX_MASK;
+		slot_ctx->dev_info |= LAST_CTX(last_ctx);
 	}
-	new_slot_info = in_ctx->slot.dev_info;
+	new_slot_info = slot_ctx->dev_info;
+
+	/* Store the usb_device pointer for later use */
+	ep->hcpriv = udev;
 
 	xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
 			(unsigned int) ep->desc.bEndpointAddress,
@@ -860,9 +902,11 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	return 0;
 }
 
-static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
+static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev)
 {
+	struct xhci_input_control_ctx *ctrl_ctx;
 	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_slot_ctx *slot_ctx;
 	int i;
 
 	/* When a device's add flag and drop flag are zero, any subsequent
@@ -870,17 +914,18 @@ static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
 	 * untouched.  Make sure we don't leave any old state in the input
 	 * endpoint contexts.
 	 */
-	virt_dev->in_ctx->drop_flags = 0;
-	virt_dev->in_ctx->add_flags = 0;
-	virt_dev->in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+	ctrl_ctx->drop_flags = 0;
+	ctrl_ctx->add_flags = 0;
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+	slot_ctx->dev_info &= ~LAST_CTX_MASK;
 	/* Endpoint 0 is always valid */
-	virt_dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+	slot_ctx->dev_info |= LAST_CTX(1);
 	for (i = 1; i < 31; ++i) {
-		ep_ctx = &virt_dev->in_ctx->ep[i];
+		ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i);
 		ep_ctx->ep_info = 0;
 		ep_ctx->ep_info2 = 0;
-		ep_ctx->deq[0] = 0;
-		ep_ctx->deq[1] = 0;
+		ep_ctx->deq = 0;
 		ep_ctx->tx_info = 0;
 	}
 }
@@ -903,6 +948,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	unsigned long flags;
 	struct xhci_hcd *xhci;
 	struct xhci_virt_device	*virt_dev;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_slot_ctx *slot_ctx;
 
 	ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
 	if (ret <= 0)
@@ -918,16 +965,18 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	virt_dev = xhci->devs[udev->slot_id];
 
 	/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
-	virt_dev->in_ctx->add_flags |= SLOT_FLAG;
-	virt_dev->in_ctx->add_flags &= ~EP0_FLAG;
-	virt_dev->in_ctx->drop_flags &= ~SLOT_FLAG;
-	virt_dev->in_ctx->drop_flags &= ~EP0_FLAG;
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+	ctrl_ctx->add_flags |= SLOT_FLAG;
+	ctrl_ctx->add_flags &= ~EP0_FLAG;
+	ctrl_ctx->drop_flags &= ~SLOT_FLAG;
+	ctrl_ctx->drop_flags &= ~EP0_FLAG;
 	xhci_dbg(xhci, "New Input Control Context:\n");
-	xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma,
-			LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+	xhci_dbg_ctx(xhci, virt_dev->in_ctx,
+			LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
 
 	spin_lock_irqsave(&xhci->lock, flags);
-	ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx_dma,
+	ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx->dma,
 			udev->slot_id);
 	if (ret < 0) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
@@ -982,10 +1031,10 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	}
 
 	xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
-	xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma,
-			LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+	xhci_dbg_ctx(xhci, virt_dev->out_ctx,
+			LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
 
-	xhci_zero_in_ctx(virt_dev);
+	xhci_zero_in_ctx(xhci, virt_dev);
 	/* Free any old rings */
 	for (i = 1; i < 31; ++i) {
 		if (virt_dev->new_ep_rings[i]) {
@@ -1023,7 +1072,67 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 			virt_dev->new_ep_rings[i] = NULL;
 		}
 	}
-	xhci_zero_in_ctx(virt_dev);
+	xhci_zero_in_ctx(xhci, virt_dev);
+}
+
+/* Deal with stalled endpoints.  The core should have sent the control message
+ * to clear the halt condition.  However, we need to make the xHCI hardware
+ * reset its sequence number, since a device will expect a sequence number of
+ * zero after the halt condition is cleared.
+ * Context: in_interrupt
+ */
+void xhci_endpoint_reset(struct usb_hcd *hcd,
+		struct usb_host_endpoint *ep)
+{
+	struct xhci_hcd *xhci;
+	struct usb_device *udev;
+	unsigned int ep_index;
+	unsigned long flags;
+	int ret;
+	struct xhci_dequeue_state deq_state;
+	struct xhci_ring *ep_ring;
+
+	xhci = hcd_to_xhci(hcd);
+	udev = (struct usb_device *) ep->hcpriv;
+	/* Called with a root hub endpoint (or an endpoint that wasn't added
+	 * with xhci_add_endpoint()
+	 */
+	if (!ep->hcpriv)
+		return;
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	ep_ring = xhci->devs[udev->slot_id]->ep_rings[ep_index];
+	if (!ep_ring->stopped_td) {
+		xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n",
+				ep->desc.bEndpointAddress);
+		return;
+	}
+
+	xhci_dbg(xhci, "Queueing reset endpoint command\n");
+	spin_lock_irqsave(&xhci->lock, flags);
+	ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index);
+	/*
+	 * Can't change the ring dequeue pointer until it's transitioned to the
+	 * stopped state, which is only upon a successful reset endpoint
+	 * command.  Better hope that last command worked!
+	 */
+	if (!ret) {
+		xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
+		/* We need to move the HW's dequeue pointer past this TD,
+		 * or it will attempt to resend it on the next doorbell ring.
+		 */
+		xhci_find_new_dequeue_state(xhci, udev->slot_id,
+				ep_index, ep_ring->stopped_td, &deq_state);
+		xhci_dbg(xhci, "Queueing new dequeue state\n");
+		xhci_queue_new_dequeue_state(xhci, ep_ring,
+				udev->slot_id,
+				ep_index, &deq_state);
+		kfree(ep_ring->stopped_td);
+		xhci_ring_cmd_db(xhci);
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	if (ret)
+		xhci_warn(xhci, "FIXME allocate a new ring segment\n");
 }
 
 /*
@@ -1120,7 +1229,9 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	struct xhci_virt_device *virt_dev;
 	int ret = 0;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-	u32 temp;
+	struct xhci_slot_ctx *slot_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	u64 temp_64;
 
 	if (!udev->slot_id) {
 		xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
@@ -1133,10 +1244,12 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	if (!udev->config)
 		xhci_setup_addressable_virt_dev(xhci, udev);
 	/* Otherwise, assume the core has the device configured how it wants */
+	xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
+	xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
 
 	spin_lock_irqsave(&xhci->lock, flags);
-	ret = xhci_queue_address_device(xhci, virt_dev->in_ctx_dma,
-			udev->slot_id);
+	ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
+					udev->slot_id);
 	if (ret) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
@@ -1176,41 +1289,37 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	default:
 		xhci_err(xhci, "ERROR: unexpected command completion "
 				"code 0x%x.\n", virt_dev->cmd_status);
+		xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
+		xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
 		ret = -EINVAL;
 		break;
 	}
 	if (ret) {
 		return ret;
 	}
-	temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[0]);
-	xhci_dbg(xhci, "Op regs DCBAA ptr[0] = %#08x\n", temp);
-	temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[1]);
-	xhci_dbg(xhci, "Op regs DCBAA ptr[1] = %#08x\n", temp);
-	xhci_dbg(xhci, "Slot ID %d dcbaa entry[0] @%p = %#08x\n",
-			udev->slot_id,
-			&xhci->dcbaa->dev_context_ptrs[2*udev->slot_id],
-			xhci->dcbaa->dev_context_ptrs[2*udev->slot_id]);
-	xhci_dbg(xhci, "Slot ID %d dcbaa entry[1] @%p = %#08x\n",
+	temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+	xhci_dbg(xhci, "Op regs DCBAA ptr = %#016llx\n", temp_64);
+	xhci_dbg(xhci, "Slot ID %d dcbaa entry @%p = %#016llx\n",
 			udev->slot_id,
-			&xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1],
-			xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1]);
+			&xhci->dcbaa->dev_context_ptrs[udev->slot_id],
+			(unsigned long long)
+				xhci->dcbaa->dev_context_ptrs[udev->slot_id]);
 	xhci_dbg(xhci, "Output Context DMA address = %#08llx\n",
-			(unsigned long long)virt_dev->out_ctx_dma);
+			(unsigned long long)virt_dev->out_ctx->dma);
 	xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
-	xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, 2);
+	xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
 	xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
-	xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2);
+	xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
 	/*
 	 * USB core uses address 1 for the roothubs, so we add one to the
 	 * address given back to us by the HC.
 	 */
-	udev->devnum = (virt_dev->out_ctx->slot.dev_state & DEV_ADDR_MASK) + 1;
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+	udev->devnum = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1;
 	/* Zero the input context control for later use */
-	virt_dev->in_ctx->add_flags = 0;
-	virt_dev->in_ctx->drop_flags = 0;
-	/* Mirror flags in the output context for future ep enable/disable */
-	virt_dev->out_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
-	virt_dev->out_ctx->drop_flags = 0;
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+	ctrl_ctx->add_flags = 0;
+	ctrl_ctx->drop_flags = 0;
 
 	xhci_dbg(xhci, "Device address = %d\n", udev->devnum);
 	/* XXX Meh, not sure if anyone else but choose_address uses this. */
@@ -1252,7 +1361,6 @@ static int __init xhci_hcd_init(void)
 	/* xhci_device_control has eight fields, and also
 	 * embeds one xhci_slot_ctx and 31 xhci_ep_ctx
 	 */
-	BUILD_BUG_ON(sizeof(struct xhci_device_control) != (8+8+8*31)*32/8);
 	BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
 	BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
 	BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index c8a72de1c50..e6b9a1c6002 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -88,7 +88,7 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
 		return;
 	prev->next = next;
 	if (link_trbs) {
-		prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr[0] = next->dma;
+		prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = next->dma;
 
 		/* Set the last TRB in the segment to have a TRB type ID of Link TRB */
 		val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
@@ -189,6 +189,63 @@ fail:
 	return 0;
 }
 
+#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
+
+struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
+						    int type, gfp_t flags)
+{
+	struct xhci_container_ctx *ctx = kzalloc(sizeof(*ctx), flags);
+	if (!ctx)
+		return NULL;
+
+	BUG_ON((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT));
+	ctx->type = type;
+	ctx->size = HCC_64BYTE_CONTEXT(xhci->hcc_params) ? 2048 : 1024;
+	if (type == XHCI_CTX_TYPE_INPUT)
+		ctx->size += CTX_SIZE(xhci->hcc_params);
+
+	ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma);
+	memset(ctx->bytes, 0, ctx->size);
+	return ctx;
+}
+
+void xhci_free_container_ctx(struct xhci_hcd *xhci,
+			     struct xhci_container_ctx *ctx)
+{
+	dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma);
+	kfree(ctx);
+}
+
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
+					      struct xhci_container_ctx *ctx)
+{
+	BUG_ON(ctx->type != XHCI_CTX_TYPE_INPUT);
+	return (struct xhci_input_control_ctx *)ctx->bytes;
+}
+
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci,
+					struct xhci_container_ctx *ctx)
+{
+	if (ctx->type == XHCI_CTX_TYPE_DEVICE)
+		return (struct xhci_slot_ctx *)ctx->bytes;
+
+	return (struct xhci_slot_ctx *)
+		(ctx->bytes + CTX_SIZE(xhci->hcc_params));
+}
+
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci,
+				    struct xhci_container_ctx *ctx,
+				    unsigned int ep_index)
+{
+	/* increment ep index by offset of start of ep ctx array */
+	ep_index++;
+	if (ctx->type == XHCI_CTX_TYPE_INPUT)
+		ep_index++;
+
+	return (struct xhci_ep_ctx *)
+		(ctx->bytes + (ep_index * CTX_SIZE(xhci->hcc_params)));
+}
+
 /* All the xhci_tds in the ring's TD list should be freed at this point */
 void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 {
@@ -200,8 +257,7 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 		return;
 
 	dev = xhci->devs[slot_id];
-	xhci->dcbaa->dev_context_ptrs[2*slot_id] = 0;
-	xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+	xhci->dcbaa->dev_context_ptrs[slot_id] = 0;
 	if (!dev)
 		return;
 
@@ -210,11 +266,10 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 			xhci_ring_free(xhci, dev->ep_rings[i]);
 
 	if (dev->in_ctx)
-		dma_pool_free(xhci->device_pool,
-				dev->in_ctx, dev->in_ctx_dma);
+		xhci_free_container_ctx(xhci, dev->in_ctx);
 	if (dev->out_ctx)
-		dma_pool_free(xhci->device_pool,
-				dev->out_ctx, dev->out_ctx_dma);
+		xhci_free_container_ctx(xhci, dev->out_ctx);
+
 	kfree(xhci->devs[slot_id]);
 	xhci->devs[slot_id] = 0;
 }
@@ -222,7 +277,6 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 		struct usb_device *udev, gfp_t flags)
 {
-	dma_addr_t	dma;
 	struct xhci_virt_device *dev;
 
 	/* Slot ID 0 is reserved */
@@ -236,23 +290,21 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 		return 0;
 	dev = xhci->devs[slot_id];
 
-	/* Allocate the (output) device context that will be used in the HC */
-	dev->out_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+	/* Allocate the (output) device context that will be used in the HC. */
+	dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags);
 	if (!dev->out_ctx)
 		goto fail;
-	dev->out_ctx_dma = dma;
+
 	xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
-			(unsigned long long)dma);
-	memset(dev->out_ctx, 0, sizeof(*dev->out_ctx));
+			(unsigned long long)dev->out_ctx->dma);
 
 	/* Allocate the (input) device context for address device command */
-	dev->in_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+	dev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, flags);
 	if (!dev->in_ctx)
 		goto fail;
-	dev->in_ctx_dma = dma;
+
 	xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
-			(unsigned long long)dma);
-	memset(dev->in_ctx, 0, sizeof(*dev->in_ctx));
+			(unsigned long long)dev->in_ctx->dma);
 
 	/* Allocate endpoint 0 ring */
 	dev->ep_rings[0] = xhci_ring_alloc(xhci, 1, true, flags);
@@ -261,17 +313,12 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 
 	init_completion(&dev->cmd_completion);
 
-	/*
-	 * Point to output device context in dcbaa; skip the output control
-	 * context, which is eight 32 bit fields (or 32 bytes long)
-	 */
-	xhci->dcbaa->dev_context_ptrs[2*slot_id] =
-		(u32) dev->out_ctx_dma + (32);
+	/* Point to output device context in dcbaa. */
+	xhci->dcbaa->dev_context_ptrs[slot_id] = dev->out_ctx->dma;
 	xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
 			slot_id,
-			&xhci->dcbaa->dev_context_ptrs[2*slot_id],
-			(unsigned long long)dev->out_ctx_dma);
-	xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+			&xhci->dcbaa->dev_context_ptrs[slot_id],
+			(unsigned long long) xhci->dcbaa->dev_context_ptrs[slot_id]);
 
 	return 1;
 fail:
@@ -285,6 +332,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	struct xhci_virt_device *dev;
 	struct xhci_ep_ctx	*ep0_ctx;
 	struct usb_device	*top_dev;
+	struct xhci_slot_ctx    *slot_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
 
 	dev = xhci->devs[udev->slot_id];
 	/* Slot ID 0 is reserved */
@@ -293,27 +342,29 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 				udev->slot_id);
 		return -EINVAL;
 	}
-	ep0_ctx = &dev->in_ctx->ep[0];
+	ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx);
+	slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
 
 	/* 2) New slot context and endpoint 0 context are valid*/
-	dev->in_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
+	ctrl_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
 
 	/* 3) Only the control endpoint is valid - one endpoint context */
-	dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+	slot_ctx->dev_info |= LAST_CTX(1);
 
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-		dev->in_ctx->slot.dev_info |= (u32) udev->route;
-		dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_SS;
+		slot_ctx->dev_info |= (u32) udev->route;
+		slot_ctx->dev_info |= (u32) SLOT_SPEED_SS;
 		break;
 	case USB_SPEED_HIGH:
-		dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_HS;
+		slot_ctx->dev_info |= (u32) SLOT_SPEED_HS;
 		break;
 	case USB_SPEED_FULL:
-		dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_FS;
+		slot_ctx->dev_info |= (u32) SLOT_SPEED_FS;
 		break;
 	case USB_SPEED_LOW:
-		dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_LS;
+		slot_ctx->dev_info |= (u32) SLOT_SPEED_LS;
 		break;
 	case USB_SPEED_VARIABLE:
 		xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
@@ -327,7 +378,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
 			top_dev = top_dev->parent)
 		/* Found device below root hub */;
-	dev->in_ctx->slot.dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
+	slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
 	xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
 
 	/* Is this a LS/FS device under a HS hub? */
@@ -337,8 +388,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	 */
 	if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
 			udev->tt) {
-		dev->in_ctx->slot.tt_info = udev->tt->hub->slot_id;
-		dev->in_ctx->slot.tt_info |= udev->ttport << 8;
+		slot_ctx->tt_info = udev->tt->hub->slot_id;
+		slot_ctx->tt_info |= udev->ttport << 8;
 	}
 	xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
 	xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
@@ -360,10 +411,9 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	ep0_ctx->ep_info2 |= MAX_BURST(0);
 	ep0_ctx->ep_info2 |= ERROR_COUNT(3);
 
-	ep0_ctx->deq[0] =
+	ep0_ctx->deq =
 		dev->ep_rings[0]->first_seg->dma;
-	ep0_ctx->deq[0] |= dev->ep_rings[0]->cycle_state;
-	ep0_ctx->deq[1] = 0;
+	ep0_ctx->deq |= dev->ep_rings[0]->cycle_state;
 
 	/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
 
@@ -470,25 +520,26 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	unsigned int max_burst;
 
 	ep_index = xhci_get_endpoint_index(&ep->desc);
-	ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+	ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
 
 	/* Set up the endpoint ring */
 	virt_dev->new_ep_rings[ep_index] = xhci_ring_alloc(xhci, 1, true, mem_flags);
 	if (!virt_dev->new_ep_rings[ep_index])
 		return -ENOMEM;
 	ep_ring = virt_dev->new_ep_rings[ep_index];
-	ep_ctx->deq[0] = ep_ring->first_seg->dma | ep_ring->cycle_state;
-	ep_ctx->deq[1] = 0;
+	ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
 
 	ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
 
 	/* FIXME dig Mult and streams info out of ep companion desc */
 
-	/* Allow 3 retries for everything but isoc */
+	/* Allow 3 retries for everything but isoc;
+	 * error count = 0 means infinite retries.
+	 */
 	if (!usb_endpoint_xfer_isoc(&ep->desc))
 		ep_ctx->ep_info2 = ERROR_COUNT(3);
 	else
-		ep_ctx->ep_info2 = ERROR_COUNT(0);
+		ep_ctx->ep_info2 = ERROR_COUNT(1);
 
 	ep_ctx->ep_info2 |= xhci_get_endpoint_type(udev, ep);
 
@@ -498,7 +549,12 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		max_packet = ep->desc.wMaxPacketSize;
 		ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
 		/* dig out max burst from ep companion desc */
-		max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+		if (!ep->ss_ep_comp) {
+			xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n");
+			max_packet = 0;
+		} else {
+			max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+		}
 		ep_ctx->ep_info2 |= MAX_BURST(max_packet);
 		break;
 	case USB_SPEED_HIGH:
@@ -531,18 +587,114 @@ void xhci_endpoint_zero(struct xhci_hcd *xhci,
 	struct xhci_ep_ctx *ep_ctx;
 
 	ep_index = xhci_get_endpoint_index(&ep->desc);
-	ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+	ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
 
 	ep_ctx->ep_info = 0;
 	ep_ctx->ep_info2 = 0;
-	ep_ctx->deq[0] = 0;
-	ep_ctx->deq[1] = 0;
+	ep_ctx->deq = 0;
 	ep_ctx->tx_info = 0;
 	/* Don't free the endpoint ring until the set interface or configuration
 	 * request succeeds.
 	 */
 }
 
+/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
+static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
+{
+	int i;
+	struct device *dev = xhci_to_hcd(xhci)->self.controller;
+	int num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
+
+	xhci_dbg(xhci, "Allocating %d scratchpad buffers\n", num_sp);
+
+	if (!num_sp)
+		return 0;
+
+	xhci->scratchpad = kzalloc(sizeof(*xhci->scratchpad), flags);
+	if (!xhci->scratchpad)
+		goto fail_sp;
+
+	xhci->scratchpad->sp_array =
+		pci_alloc_consistent(to_pci_dev(dev),
+				     num_sp * sizeof(u64),
+				     &xhci->scratchpad->sp_dma);
+	if (!xhci->scratchpad->sp_array)
+		goto fail_sp2;
+
+	xhci->scratchpad->sp_buffers = kzalloc(sizeof(void *) * num_sp, flags);
+	if (!xhci->scratchpad->sp_buffers)
+		goto fail_sp3;
+
+	xhci->scratchpad->sp_dma_buffers =
+		kzalloc(sizeof(dma_addr_t) * num_sp, flags);
+
+	if (!xhci->scratchpad->sp_dma_buffers)
+		goto fail_sp4;
+
+	xhci->dcbaa->dev_context_ptrs[0] = xhci->scratchpad->sp_dma;
+	for (i = 0; i < num_sp; i++) {
+		dma_addr_t dma;
+		void *buf = pci_alloc_consistent(to_pci_dev(dev),
+						 xhci->page_size, &dma);
+		if (!buf)
+			goto fail_sp5;
+
+		xhci->scratchpad->sp_array[i] = dma;
+		xhci->scratchpad->sp_buffers[i] = buf;
+		xhci->scratchpad->sp_dma_buffers[i] = dma;
+	}
+
+	return 0;
+
+ fail_sp5:
+	for (i = i - 1; i >= 0; i--) {
+		pci_free_consistent(to_pci_dev(dev), xhci->page_size,
+				    xhci->scratchpad->sp_buffers[i],
+				    xhci->scratchpad->sp_dma_buffers[i]);
+	}
+	kfree(xhci->scratchpad->sp_dma_buffers);
+
+ fail_sp4:
+	kfree(xhci->scratchpad->sp_buffers);
+
+ fail_sp3:
+	pci_free_consistent(to_pci_dev(dev), num_sp * sizeof(u64),
+			    xhci->scratchpad->sp_array,
+			    xhci->scratchpad->sp_dma);
+
+ fail_sp2:
+	kfree(xhci->scratchpad);
+	xhci->scratchpad = NULL;
+
+ fail_sp:
+	return -ENOMEM;
+}
+
+static void scratchpad_free(struct xhci_hcd *xhci)
+{
+	int num_sp;
+	int i;
+	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+	if (!xhci->scratchpad)
+		return;
+
+	num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
+
+	for (i = 0; i < num_sp; i++) {
+		pci_free_consistent(pdev, xhci->page_size,
+				    xhci->scratchpad->sp_buffers[i],
+				    xhci->scratchpad->sp_dma_buffers[i]);
+	}
+	kfree(xhci->scratchpad->sp_dma_buffers);
+	kfree(xhci->scratchpad->sp_buffers);
+	pci_free_consistent(pdev, num_sp * sizeof(u64),
+			    xhci->scratchpad->sp_array,
+			    xhci->scratchpad->sp_dma);
+	kfree(xhci->scratchpad);
+	xhci->scratchpad = NULL;
+}
+
 void xhci_mem_cleanup(struct xhci_hcd *xhci)
 {
 	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
@@ -551,10 +703,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
 	xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
-	xhci_writel(xhci, 0, &xhci->ir_set->erst_base[0]);
-	xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
-	xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[0]);
-	xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
+	xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
+	xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
 	if (xhci->erst.entries)
 		pci_free_consistent(pdev, size,
@@ -566,8 +716,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->event_ring = NULL;
 	xhci_dbg(xhci, "Freed event ring\n");
 
-	xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[0]);
-	xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[1]);
+	xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
 	if (xhci->cmd_ring)
 		xhci_ring_free(xhci, xhci->cmd_ring);
 	xhci->cmd_ring = NULL;
@@ -586,8 +735,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->device_pool = NULL;
 	xhci_dbg(xhci, "Freed device context pool\n");
 
-	xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[0]);
-	xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[1]);
+	xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
 	if (xhci->dcbaa)
 		pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
 				xhci->dcbaa, xhci->dcbaa->dma);
@@ -595,6 +743,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 
 	xhci->page_size = 0;
 	xhci->page_shift = 0;
+	scratchpad_free(xhci);
 }
 
 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
@@ -602,6 +751,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	dma_addr_t	dma;
 	struct device	*dev = xhci_to_hcd(xhci)->self.controller;
 	unsigned int	val, val2;
+	u64		val_64;
 	struct xhci_segment	*seg;
 	u32 page_size;
 	int i;
@@ -647,8 +797,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	xhci->dcbaa->dma = dma;
 	xhci_dbg(xhci, "// Device context base array address = 0x%llx (DMA), %p (virt)\n",
 			(unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
-	xhci_writel(xhci, dma, &xhci->op_regs->dcbaa_ptr[0]);
-	xhci_writel(xhci, (u32) 0, &xhci->op_regs->dcbaa_ptr[1]);
+	xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
 
 	/*
 	 * Initialize the ring segment pool.  The ring must be a contiguous
@@ -658,11 +807,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	 */
 	xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
 			SEGMENT_SIZE, 64, xhci->page_size);
+
 	/* See Table 46 and Note on Figure 55 */
-	/* FIXME support 64-byte contexts */
 	xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
-			sizeof(struct xhci_device_control),
-			64, xhci->page_size);
+			2112, 64, xhci->page_size);
 	if (!xhci->segment_pool || !xhci->device_pool)
 		goto fail;
 
@@ -675,14 +823,12 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 			(unsigned long long)xhci->cmd_ring->first_seg->dma);
 
 	/* Set the address in the Command Ring Control register */
-	val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
-	val = (val & ~CMD_RING_ADDR_MASK) |
-		(xhci->cmd_ring->first_seg->dma & CMD_RING_ADDR_MASK) |
+	val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+		(xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
 		xhci->cmd_ring->cycle_state;
-	xhci_dbg(xhci, "// Setting command ring address low bits to 0x%x\n", val);
-	xhci_writel(xhci, val, &xhci->op_regs->cmd_ring[0]);
-	xhci_dbg(xhci, "// Setting command ring address high bits to 0x0\n");
-	xhci_writel(xhci, (u32) 0, &xhci->op_regs->cmd_ring[1]);
+	xhci_dbg(xhci, "// Setting command ring address to 0x%x\n", val);
+	xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
 	xhci_dbg_cmd_ptrs(xhci);
 
 	val = xhci_readl(xhci, &xhci->cap_regs->db_off);
@@ -722,8 +868,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	/* set ring base address and size for each segment table entry */
 	for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) {
 		struct xhci_erst_entry *entry = &xhci->erst.entries[val];
-		entry->seg_addr[0] = seg->dma;
-		entry->seg_addr[1] = 0;
+		entry->seg_addr = seg->dma;
 		entry->seg_size = TRBS_PER_SEGMENT;
 		entry->rsvd = 0;
 		seg = seg->next;
@@ -741,11 +886,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	/* set the segment table base address */
 	xhci_dbg(xhci, "// Set ERST base address for ir_set 0 = 0x%llx\n",
 			(unsigned long long)xhci->erst.erst_dma_addr);
-	val = xhci_readl(xhci, &xhci->ir_set->erst_base[0]);
-	val &= ERST_PTR_MASK;
-	val |= (xhci->erst.erst_dma_addr & ~ERST_PTR_MASK);
-	xhci_writel(xhci, val, &xhci->ir_set->erst_base[0]);
-	xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
+	val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base);
+	val_64 &= ERST_PTR_MASK;
+	val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK);
+	xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base);
 
 	/* Set the event ring dequeue address */
 	xhci_set_hc_event_deq(xhci);
@@ -761,7 +905,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	for (i = 0; i < MAX_HC_SLOTS; ++i)
 		xhci->devs[i] = 0;
 
+	if (scratchpad_alloc(xhci, flags))
+		goto fail;
+
 	return 0;
+
 fail:
 	xhci_warn(xhci, "Couldn't initialize memory\n");
 	xhci_mem_cleanup(xhci);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 1462709e26c..592fe7e623f 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -117,6 +117,7 @@ static const struct hc_driver xhci_pci_hc_driver = {
 	.free_dev =		xhci_free_dev,
 	.add_endpoint =		xhci_add_endpoint,
 	.drop_endpoint =	xhci_drop_endpoint,
+	.endpoint_reset =	xhci_endpoint_reset,
 	.check_bandwidth =	xhci_check_bandwidth,
 	.reset_bandwidth =	xhci_reset_bandwidth,
 	.address_device =	xhci_address_device,
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 02d81985c45..aa88a067148 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -135,6 +135,7 @@ static void next_trb(struct xhci_hcd *xhci,
 static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
 {
 	union xhci_trb *next = ++(ring->dequeue);
+	unsigned long long addr;
 
 	ring->deq_updates++;
 	/* Update the dequeue pointer further if that was a link TRB or we're at
@@ -152,6 +153,13 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
 		ring->dequeue = ring->deq_seg->trbs;
 		next = ring->dequeue;
 	}
+	addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
+	if (ring == xhci->event_ring)
+		xhci_dbg(xhci, "Event ring deq = 0x%llx (DMA)\n", addr);
+	else if (ring == xhci->cmd_ring)
+		xhci_dbg(xhci, "Command ring deq = 0x%llx (DMA)\n", addr);
+	else
+		xhci_dbg(xhci, "Ring deq = 0x%llx (DMA)\n", addr);
 }
 
 /*
@@ -171,6 +179,7 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
 {
 	u32 chain;
 	union xhci_trb *next;
+	unsigned long long addr;
 
 	chain = ring->enqueue->generic.field[3] & TRB_CHAIN;
 	next = ++(ring->enqueue);
@@ -204,6 +213,13 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
 		ring->enqueue = ring->enq_seg->trbs;
 		next = ring->enqueue;
 	}
+	addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
+	if (ring == xhci->event_ring)
+		xhci_dbg(xhci, "Event ring enq = 0x%llx (DMA)\n", addr);
+	else if (ring == xhci->cmd_ring)
+		xhci_dbg(xhci, "Command ring enq = 0x%llx (DMA)\n", addr);
+	else
+		xhci_dbg(xhci, "Ring enq = 0x%llx (DMA)\n", addr);
 }
 
 /*
@@ -237,7 +253,7 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
 
 void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
 {
-	u32 temp;
+	u64 temp;
 	dma_addr_t deq;
 
 	deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
@@ -246,13 +262,15 @@ void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
 		xhci_warn(xhci, "WARN something wrong with SW event ring "
 				"dequeue ptr.\n");
 	/* Update HC event ring dequeue pointer */
-	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+	temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
 	temp &= ERST_PTR_MASK;
-	if (!in_interrupt())
-		xhci_dbg(xhci, "// Write event ring dequeue pointer\n");
-	xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
-	xhci_writel(xhci, (deq & ~ERST_PTR_MASK) | temp,
-			&xhci->ir_set->erst_dequeue[0]);
+	/* Don't clear the EHB bit (which is RW1C) because
+	 * there might be more events to service.
+	 */
+	temp &= ~ERST_EHB;
+	xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n");
+	xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
+			&xhci->ir_set->erst_dequeue);
 }
 
 /* Ring the host controller doorbell after placing a command on the ring */
@@ -279,7 +297,8 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci,
 	/* Don't ring the doorbell for this endpoint if there are pending
 	 * cancellations because the we don't want to interrupt processing.
 	 */
-	if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)) {
+	if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)
+			&& !(ep_ring->state & EP_HALTED)) {
 		field = xhci_readl(xhci, db_addr) & DB_MASK;
 		xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr);
 		/* Flush PCI posted writes - FIXME Matthew Wilcox says this
@@ -316,12 +335,6 @@ static struct xhci_segment *find_trb_seg(
 	return cur_seg;
 }
 
-struct dequeue_state {
-	struct xhci_segment *new_deq_seg;
-	union xhci_trb *new_deq_ptr;
-	int new_cycle_state;
-};
-
 /*
  * Move the xHC's endpoint ring dequeue pointer past cur_td.
  * Record the new state of the xHC's endpoint ring dequeue segment,
@@ -336,24 +349,30 @@ struct dequeue_state {
  *  - Finally we move the dequeue state one TRB further, toggling the cycle bit
  *    if we've moved it past a link TRB with the toggle cycle bit set.
  */
-static void find_new_dequeue_state(struct xhci_hcd *xhci,
+void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
-		struct xhci_td *cur_td, struct dequeue_state *state)
+		struct xhci_td *cur_td, struct xhci_dequeue_state *state)
 {
 	struct xhci_virt_device *dev = xhci->devs[slot_id];
 	struct xhci_ring *ep_ring = dev->ep_rings[ep_index];
 	struct xhci_generic_trb *trb;
+	struct xhci_ep_ctx *ep_ctx;
+	dma_addr_t addr;
 
 	state->new_cycle_state = 0;
+	xhci_dbg(xhci, "Finding segment containing stopped TRB.\n");
 	state->new_deq_seg = find_trb_seg(cur_td->start_seg,
 			ep_ring->stopped_trb,
 			&state->new_cycle_state);
 	if (!state->new_deq_seg)
 		BUG();
 	/* Dig out the cycle state saved by the xHC during the stop ep cmd */
-	state->new_cycle_state = 0x1 & dev->out_ctx->ep[ep_index].deq[0];
+	xhci_dbg(xhci, "Finding endpoint context\n");
+	ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+	state->new_cycle_state = 0x1 & ep_ctx->deq;
 
 	state->new_deq_ptr = cur_td->last_trb;
+	xhci_dbg(xhci, "Finding segment containing last TRB in TD.\n");
 	state->new_deq_seg = find_trb_seg(state->new_deq_seg,
 			state->new_deq_ptr,
 			&state->new_cycle_state);
@@ -367,6 +386,12 @@ static void find_new_dequeue_state(struct xhci_hcd *xhci,
 	next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
 
 	/* Don't update the ring cycle state for the producer (us). */
+	xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n",
+			state->new_deq_seg);
+	addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr);
+	xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n",
+			(unsigned long long) addr);
+	xhci_dbg(xhci, "Setting dequeue pointer in internal ring state.\n");
 	ep_ring->dequeue = state->new_deq_ptr;
 	ep_ring->deq_seg = state->new_deq_seg;
 }
@@ -416,6 +441,30 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
 		unsigned int ep_index, struct xhci_segment *deq_seg,
 		union xhci_trb *deq_ptr, u32 cycle_state);
 
+void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
+		struct xhci_ring *ep_ring, unsigned int slot_id,
+		unsigned int ep_index, struct xhci_dequeue_state *deq_state)
+{
+	xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
+			"new deq ptr = %p (0x%llx dma), new cycle = %u\n",
+			deq_state->new_deq_seg,
+			(unsigned long long)deq_state->new_deq_seg->dma,
+			deq_state->new_deq_ptr,
+			(unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr),
+			deq_state->new_cycle_state);
+	queue_set_tr_deq(xhci, slot_id, ep_index,
+			deq_state->new_deq_seg,
+			deq_state->new_deq_ptr,
+			(u32) deq_state->new_cycle_state);
+	/* Stop the TD queueing code from ringing the doorbell until
+	 * this command completes.  The HC won't set the dequeue pointer
+	 * if the ring is running, and ringing the doorbell starts the
+	 * ring running.
+	 */
+	ep_ring->state |= SET_DEQ_PENDING;
+	xhci_ring_cmd_db(xhci);
+}
+
 /*
  * When we get a command completion for a Stop Endpoint Command, we need to
  * unlink any cancelled TDs from the ring.  There are two ways to do that:
@@ -436,7 +485,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 	struct xhci_td *cur_td = 0;
 	struct xhci_td *last_unlinked_td;
 
-	struct dequeue_state deq_state;
+	struct xhci_dequeue_state deq_state;
 #ifdef CONFIG_USB_HCD_STAT
 	ktime_t stop_time = ktime_get();
 #endif
@@ -464,7 +513,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 		 * move the xHC endpoint ring dequeue pointer past this TD.
 		 */
 		if (cur_td == ep_ring->stopped_td)
-			find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
+			xhci_find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
 					&deq_state);
 		else
 			td_to_noop(xhci, ep_ring, cur_td);
@@ -480,24 +529,8 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 
 	/* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
 	if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
-		xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
-				"new deq ptr = %p (0x%llx dma), new cycle = %u\n",
-				deq_state.new_deq_seg,
-				(unsigned long long)deq_state.new_deq_seg->dma,
-				deq_state.new_deq_ptr,
-				(unsigned long long)xhci_trb_virt_to_dma(deq_state.new_deq_seg, deq_state.new_deq_ptr),
-				deq_state.new_cycle_state);
-		queue_set_tr_deq(xhci, slot_id, ep_index,
-				deq_state.new_deq_seg,
-				deq_state.new_deq_ptr,
-				(u32) deq_state.new_cycle_state);
-		/* Stop the TD queueing code from ringing the doorbell until
-		 * this command completes.  The HC won't set the dequeue pointer
-		 * if the ring is running, and ringing the doorbell starts the
-		 * ring running.
-		 */
-		ep_ring->state |= SET_DEQ_PENDING;
-		xhci_ring_cmd_db(xhci);
+		xhci_queue_new_dequeue_state(xhci, ep_ring,
+				slot_id, ep_index, &deq_state);
 	} else {
 		/* Otherwise just ring the doorbell to restart the ring */
 		ring_ep_doorbell(xhci, slot_id, ep_index);
@@ -551,11 +584,15 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
 	unsigned int ep_index;
 	struct xhci_ring *ep_ring;
 	struct xhci_virt_device *dev;
+	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_slot_ctx *slot_ctx;
 
 	slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
 	ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
 	dev = xhci->devs[slot_id];
 	ep_ring = dev->ep_rings[ep_index];
+	ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+	slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
 
 	if (GET_COMP_CODE(event->status) != COMP_SUCCESS) {
 		unsigned int ep_state;
@@ -569,9 +606,9 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
 		case COMP_CTX_STATE:
 			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due "
 					"to incorrect slot or ep state.\n");
-			ep_state = dev->out_ctx->ep[ep_index].ep_info;
+			ep_state = ep_ctx->ep_info;
 			ep_state &= EP_STATE_MASK;
-			slot_state = dev->out_ctx->slot.dev_state;
+			slot_state = slot_ctx->dev_state;
 			slot_state = GET_SLOT_STATE(slot_state);
 			xhci_dbg(xhci, "Slot state = %u, EP state = %u\n",
 					slot_state, ep_state);
@@ -593,16 +630,33 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
 		 * cancelling URBs, which might not be an error...
 		 */
 	} else {
-		xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq[0] = 0x%x, "
-				"deq[1] = 0x%x.\n",
-				dev->out_ctx->ep[ep_index].deq[0],
-				dev->out_ctx->ep[ep_index].deq[1]);
+		xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n",
+				ep_ctx->deq);
 	}
 
 	ep_ring->state &= ~SET_DEQ_PENDING;
 	ring_ep_doorbell(xhci, slot_id, ep_index);
 }
 
+static void handle_reset_ep_completion(struct xhci_hcd *xhci,
+		struct xhci_event_cmd *event,
+		union xhci_trb *trb)
+{
+	int slot_id;
+	unsigned int ep_index;
+
+	slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
+	ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+	/* This command will only fail if the endpoint wasn't halted,
+	 * but we don't care.
+	 */
+	xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
+			(unsigned int) GET_COMP_CODE(event->status));
+
+	/* Clear our internal halted state and restart the ring */
+	xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED;
+	ring_ep_doorbell(xhci, slot_id, ep_index);
+}
 
 static void handle_cmd_completion(struct xhci_hcd *xhci,
 		struct xhci_event_cmd *event)
@@ -611,7 +665,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 	u64 cmd_dma;
 	dma_addr_t cmd_dequeue_dma;
 
-	cmd_dma = (((u64) event->cmd_trb[1]) << 32) + event->cmd_trb[0];
+	cmd_dma = event->cmd_trb;
 	cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
 			xhci->cmd_ring->dequeue);
 	/* Is the command ring deq ptr out of sync with the deq seg ptr? */
@@ -653,6 +707,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 	case TRB_TYPE(TRB_CMD_NOOP):
 		++xhci->noops_handled;
 		break;
+	case TRB_TYPE(TRB_RESET_EP):
+		handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue);
+		break;
 	default:
 		/* Skip over unknown commands on the event ring */
 		xhci->error_bitmask |= 1 << 6;
@@ -756,7 +813,9 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	union xhci_trb *event_trb;
 	struct urb *urb = 0;
 	int status = -EINPROGRESS;
+	struct xhci_ep_ctx *ep_ctx;
 
+	xhci_dbg(xhci, "In %s\n", __func__);
 	xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)];
 	if (!xdev) {
 		xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
@@ -765,17 +824,17 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 
 	/* Endpoint ID is 1 based, our index is zero based */
 	ep_index = TRB_TO_EP_ID(event->flags) - 1;
+	xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index);
 	ep_ring = xdev->ep_rings[ep_index];
-	if (!ep_ring || (xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
+	ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+	if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
 		xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n");
 		return -ENODEV;
 	}
 
-	event_dma = event->buffer[0];
-	if (event->buffer[1] != 0)
-		xhci_warn(xhci, "WARN ignoring upper 32-bits of 64-bit TRB dma address\n");
-
+	event_dma = event->buffer;
 	/* This TRB should be in the TD at the head of this ring's TD list */
+	xhci_dbg(xhci, "%s - checking for list empty\n", __func__);
 	if (list_empty(&ep_ring->td_list)) {
 		xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
 				TRB_TO_SLOT_ID(event->flags), ep_index);
@@ -785,11 +844,14 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		urb = NULL;
 		goto cleanup;
 	}
+	xhci_dbg(xhci, "%s - getting list entry\n", __func__);
 	td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
 
 	/* Is this a TRB in the currently executing TD? */
+	xhci_dbg(xhci, "%s - looking for TD\n", __func__);
 	event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
 			td->last_trb, event_dma);
+	xhci_dbg(xhci, "%s - found event_seg = %p\n", __func__, event_seg);
 	if (!event_seg) {
 		/* HC is busted, give up! */
 		xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
@@ -798,10 +860,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
 	xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
 			(unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
-	xhci_dbg(xhci, "Offset 0x00 (buffer[0]) = 0x%x\n",
-			(unsigned int) event->buffer[0]);
-	xhci_dbg(xhci, "Offset 0x04 (buffer[0]) = 0x%x\n",
-			(unsigned int) event->buffer[1]);
+	xhci_dbg(xhci, "Offset 0x00 (buffer lo) = 0x%x\n",
+			lower_32_bits(event->buffer));
+	xhci_dbg(xhci, "Offset 0x04 (buffer hi) = 0x%x\n",
+			upper_32_bits(event->buffer));
 	xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n",
 			(unsigned int) event->transfer_len);
 	xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n",
@@ -823,6 +885,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		break;
 	case COMP_STALL:
 		xhci_warn(xhci, "WARN: Stalled endpoint\n");
+		ep_ring->state |= EP_HALTED;
 		status = -EPIPE;
 		break;
 	case COMP_TRB_ERR:
@@ -833,6 +896,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		xhci_warn(xhci, "WARN: transfer error on endpoint\n");
 		status = -EPROTO;
 		break;
+	case COMP_BABBLE:
+		xhci_warn(xhci, "WARN: babble error on endpoint\n");
+		status = -EOVERFLOW;
+		break;
 	case COMP_DB_ERR:
 		xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
 		status = -ENOSR;
@@ -874,15 +941,26 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		if (event_trb != ep_ring->dequeue) {
 			/* The event was for the status stage */
 			if (event_trb == td->last_trb) {
-				td->urb->actual_length =
-					td->urb->transfer_buffer_length;
+				if (td->urb->actual_length != 0) {
+					/* Don't overwrite a previously set error code */
+					if (status == -EINPROGRESS || status == 0)
+						/* Did we already see a short data stage? */
+						status = -EREMOTEIO;
+				} else {
+					td->urb->actual_length =
+						td->urb->transfer_buffer_length;
+				}
 			} else {
 			/* Maybe the event was for the data stage? */
-				if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+				if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) {
 					/* We didn't stop on a link TRB in the middle */
 					td->urb->actual_length =
 						td->urb->transfer_buffer_length -
 						TRB_LEN(event->transfer_len);
+					xhci_dbg(xhci, "Waiting for status stage event\n");
+					urb = NULL;
+					goto cleanup;
+				}
 			}
 		}
 	} else {
@@ -929,16 +1007,20 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 							TRB_LEN(event->transfer_len));
 					td->urb->actual_length = 0;
 				}
-				if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
-					status = -EREMOTEIO;
-				else
-					status = 0;
+				/* Don't overwrite a previously set error code */
+				if (status == -EINPROGRESS) {
+					if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+						status = -EREMOTEIO;
+					else
+						status = 0;
+				}
 			} else {
 				td->urb->actual_length = td->urb->transfer_buffer_length;
 				/* Ignore a short packet completion if the
 				 * untransferred length was zero.
 				 */
-				status = 0;
+				if (status == -EREMOTEIO)
+					status = 0;
 			}
 		} else {
 			/* Slow path - walk the list, starting from the dequeue
@@ -965,19 +1047,30 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 					TRB_LEN(event->transfer_len);
 		}
 	}
-	/* The Endpoint Stop Command completion will take care of
-	 * any stopped TDs.  A stopped TD may be restarted, so don't update the
-	 * ring dequeue pointer or take this TD off any lists yet.
-	 */
 	if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL ||
 			GET_COMP_CODE(event->transfer_len) == COMP_STOP) {
+		/* The Endpoint Stop Command completion will take care of any
+		 * stopped TDs.  A stopped TD may be restarted, so don't update
+		 * the ring dequeue pointer or take this TD off any lists yet.
+		 */
 		ep_ring->stopped_td = td;
 		ep_ring->stopped_trb = event_trb;
 	} else {
-		/* Update ring dequeue pointer */
-		while (ep_ring->dequeue != td->last_trb)
+		if (GET_COMP_CODE(event->transfer_len) == COMP_STALL) {
+			/* The transfer is completed from the driver's
+			 * perspective, but we need to issue a set dequeue
+			 * command for this stalled endpoint to move the dequeue
+			 * pointer past the TD.  We can't do that here because
+			 * the halt condition must be cleared first.
+			 */
+			ep_ring->stopped_td = td;
+			ep_ring->stopped_trb = event_trb;
+		} else {
+			/* Update ring dequeue pointer */
+			while (ep_ring->dequeue != td->last_trb)
+				inc_deq(xhci, ep_ring, false);
 			inc_deq(xhci, ep_ring, false);
-		inc_deq(xhci, ep_ring, false);
+		}
 
 		/* Clean up the endpoint's TD list */
 		urb = td->urb;
@@ -987,7 +1080,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			list_del(&td->cancelled_td_list);
 			ep_ring->cancels_pending--;
 		}
-		kfree(td);
+		/* Leave the TD around for the reset endpoint function to use */
+		if (GET_COMP_CODE(event->transfer_len) != COMP_STALL) {
+			kfree(td);
+		}
 		urb->hcpriv = NULL;
 	}
 cleanup:
@@ -997,6 +1093,8 @@ cleanup:
 	/* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
 	if (urb) {
 		usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
+		xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n",
+				urb, td->urb->actual_length, status);
 		spin_unlock(&xhci->lock);
 		usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
 		spin_lock(&xhci->lock);
@@ -1014,6 +1112,7 @@ void xhci_handle_event(struct xhci_hcd *xhci)
 	int update_ptrs = 1;
 	int ret;
 
+	xhci_dbg(xhci, "In %s\n", __func__);
 	if (!xhci->event_ring || !xhci->event_ring->dequeue) {
 		xhci->error_bitmask |= 1 << 1;
 		return;
@@ -1026,18 +1125,25 @@ void xhci_handle_event(struct xhci_hcd *xhci)
 		xhci->error_bitmask |= 1 << 2;
 		return;
 	}
+	xhci_dbg(xhci, "%s - OS owns TRB\n", __func__);
 
 	/* FIXME: Handle more event types. */
 	switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) {
 	case TRB_TYPE(TRB_COMPLETION):
+		xhci_dbg(xhci, "%s - calling handle_cmd_completion\n", __func__);
 		handle_cmd_completion(xhci, &event->event_cmd);
+		xhci_dbg(xhci, "%s - returned from handle_cmd_completion\n", __func__);
 		break;
 	case TRB_TYPE(TRB_PORT_STATUS):
+		xhci_dbg(xhci, "%s - calling handle_port_status\n", __func__);
 		handle_port_status(xhci, event);
+		xhci_dbg(xhci, "%s - returned from handle_port_status\n", __func__);
 		update_ptrs = 0;
 		break;
 	case TRB_TYPE(TRB_TRANSFER):
+		xhci_dbg(xhci, "%s - calling handle_tx_event\n", __func__);
 		ret = handle_tx_event(xhci, &event->trans_event);
+		xhci_dbg(xhci, "%s - returned from handle_tx_event\n", __func__);
 		if (ret < 0)
 			xhci->error_bitmask |= 1 << 9;
 		else
@@ -1093,13 +1199,13 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
 		 */
 		xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
 		return -ENOENT;
-	case EP_STATE_HALTED:
 	case EP_STATE_ERROR:
-		xhci_warn(xhci, "WARN waiting for halt or error on ep "
-				"to be cleared\n");
+		xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
 		/* FIXME event handling code for error needs to clear it */
 		/* XXX not sure if this should be -ENOENT or not */
 		return -EINVAL;
+	case EP_STATE_HALTED:
+		xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
 	case EP_STATE_STOPPED:
 	case EP_STATE_RUNNING:
 		break;
@@ -1128,9 +1234,9 @@ static int prepare_transfer(struct xhci_hcd *xhci,
 		gfp_t mem_flags)
 {
 	int ret;
-
+	struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
 	ret = prepare_ring(xhci, xdev->ep_rings[ep_index],
-			xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK,
+			ep_ctx->ep_info & EP_STATE_MASK,
 			num_trbs, mem_flags);
 	if (ret)
 		return ret;
@@ -1285,6 +1391,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	/* Queue the first TRB, even if it's zero-length */
 	do {
 		u32 field = 0;
+		u32 length_field = 0;
 
 		/* Don't change the cycle bit of the first TRB until later */
 		if (first_trb)
@@ -1314,10 +1421,13 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 					(unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
 					(unsigned int) addr + trb_buff_len);
 		}
+		length_field = TRB_LEN(trb_buff_len) |
+			TD_REMAINDER(urb->transfer_buffer_length - running_total) |
+			TRB_INTR_TARGET(0);
 		queue_trb(xhci, ep_ring, false,
-				(u32) addr,
-				(u32) ((u64) addr >> 32),
-				TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+				lower_32_bits(addr),
+				upper_32_bits(addr),
+				length_field,
 				/* We always want to know if the TRB was short,
 				 * or we won't get an event when it completes.
 				 * (Unless we use event data TRBs, which are a
@@ -1365,7 +1475,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	struct xhci_generic_trb *start_trb;
 	bool first_trb;
 	int start_cycle;
-	u32 field;
+	u32 field, length_field;
 
 	int running_total, trb_buff_len, ret;
 	u64 addr;
@@ -1443,10 +1553,13 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			td->last_trb = ep_ring->enqueue;
 			field |= TRB_IOC;
 		}
+		length_field = TRB_LEN(trb_buff_len) |
+			TD_REMAINDER(urb->transfer_buffer_length - running_total) |
+			TRB_INTR_TARGET(0);
 		queue_trb(xhci, ep_ring, false,
-				(u32) addr,
-				(u32) ((u64) addr >> 32),
-				TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+				lower_32_bits(addr),
+				upper_32_bits(addr),
+				length_field,
 				/* We always want to know if the TRB was short,
 				 * or we won't get an event when it completes.
 				 * (Unless we use event data TRBs, which are a
@@ -1478,7 +1591,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	struct usb_ctrlrequest *setup;
 	struct xhci_generic_trb *start_trb;
 	int start_cycle;
-	u32 field;
+	u32 field, length_field;
 	struct xhci_td *td;
 
 	ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
@@ -1528,13 +1641,16 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 	/* If there's data, queue data TRBs */
 	field = 0;
+	length_field = TRB_LEN(urb->transfer_buffer_length) |
+		TD_REMAINDER(urb->transfer_buffer_length) |
+		TRB_INTR_TARGET(0);
 	if (urb->transfer_buffer_length > 0) {
 		if (setup->bRequestType & USB_DIR_IN)
 			field |= TRB_DIR_IN;
 		queue_trb(xhci, ep_ring, false,
 				lower_32_bits(urb->transfer_dma),
 				upper_32_bits(urb->transfer_dma),
-				TRB_LEN(urb->transfer_buffer_length) | TRB_INTR_TARGET(0),
+				length_field,
 				/* Event on short tx */
 				field | TRB_ISP | TRB_TYPE(TRB_DATA) | ep_ring->cycle_state);
 	}
@@ -1603,7 +1719,8 @@ int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
 int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id)
 {
-	return queue_command(xhci, in_ctx_ptr, 0, 0,
+	return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+			upper_32_bits(in_ctx_ptr), 0,
 			TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id));
 }
 
@@ -1611,7 +1728,8 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id)
 {
-	return queue_command(xhci, in_ctx_ptr, 0, 0,
+	return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+			upper_32_bits(in_ctx_ptr), 0,
 			TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id));
 }
 
@@ -1639,10 +1757,23 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
 	u32 type = TRB_TYPE(TRB_SET_DEQ);
 
 	addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
-	if (addr == 0)
+	if (addr == 0) {
 		xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
 		xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
 				deq_seg, deq_ptr);
-	return queue_command(xhci, (u32) addr | cycle_state, 0, 0,
+		return 0;
+	}
+	return queue_command(xhci, lower_32_bits(addr) | cycle_state,
+			upper_32_bits(addr), 0,
 			trb_slot_id | trb_ep_index | type);
 }
+
+int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
+		unsigned int ep_index)
+{
+	u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
+	u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+	u32 type = TRB_TYPE(TRB_RESET_EP);
+
+	return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type);
+}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8936eeb5588..d31d32206ba 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -25,6 +25,7 @@
 
 #include <linux/usb.h>
 #include <linux/timer.h>
+#include <linux/kernel.h>
 
 #include "../core/hcd.h"
 /* Code sharing between pci-quirks and xhci hcd */
@@ -42,14 +43,6 @@
  * xHCI register interface.
  * This corresponds to the eXtensible Host Controller Interface (xHCI)
  * Revision 0.95 specification
- *
- * Registers should always be accessed with double word or quad word accesses.
- *
- * Some xHCI implementations may support 64-bit address pointers.  Registers
- * with 64-bit address pointers should be written to with dword accesses by
- * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
- * xHCI implementations that do not support 64-bit address pointers will ignore
- * the high dword, and write order is irrelevant.
  */
 
 /**
@@ -96,6 +89,7 @@ struct xhci_cap_regs {
 #define HCS_ERST_MAX(p)		(((p) >> 4) & 0xf)
 /* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
 /* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p)   (((p) >> 27) & 0x1f)
 
 /* HCSPARAMS3 - hcs_params3 - bitmasks */
 /* bits 0:7, Max U1 to U0 latency for the roothub ports */
@@ -166,10 +160,10 @@ struct xhci_op_regs {
 	u32	reserved1;
 	u32	reserved2;
 	u32	dev_notification;
-	u32	cmd_ring[2];
+	u64	cmd_ring;
 	/* rsvd: offset 0x20-2F */
 	u32	reserved3[4];
-	u32	dcbaa_ptr[2];
+	u64	dcbaa_ptr;
 	u32	config_reg;
 	/* rsvd: offset 0x3C-3FF */
 	u32	reserved4[241];
@@ -254,7 +248,7 @@ struct xhci_op_regs {
 #define CMD_RING_RUNNING	(1 << 3)
 /* bits 4:5 reserved and should be preserved */
 /* Command Ring pointer - bit mask for the lower 32 bits. */
-#define CMD_RING_ADDR_MASK	(0xffffffc0)
+#define CMD_RING_RSVD_BITS	(0x3f)
 
 /* CONFIG - Configure Register - config_reg bitmasks */
 /* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
@@ -382,8 +376,8 @@ struct xhci_intr_reg {
 	u32	irq_control;
 	u32	erst_size;
 	u32	rsvd;
-	u32	erst_base[2];
-	u32	erst_dequeue[2];
+	u64	erst_base;
+	u64	erst_dequeue;
 };
 
 /* irq_pending bitmasks */
@@ -453,6 +447,27 @@ struct xhci_doorbell_array {
 
 
 /**
+ * struct xhci_container_ctx
+ * @type: Type of context.  Used to calculated offsets to contained contexts.
+ * @size: Size of the context data
+ * @bytes: The raw context data given to HW
+ * @dma: dma address of the bytes
+ *
+ * Represents either a Device or Input context.  Holds a pointer to the raw
+ * memory used for the context (bytes) and dma address of it (dma).
+ */
+struct xhci_container_ctx {
+	unsigned type;
+#define XHCI_CTX_TYPE_DEVICE  0x1
+#define XHCI_CTX_TYPE_INPUT   0x2
+
+	int size;
+
+	u8 *bytes;
+	dma_addr_t dma;
+};
+
+/**
  * struct xhci_slot_ctx
  * @dev_info:	Route string, device speed, hub info, and last valid endpoint
  * @dev_info2:	Max exit latency for device number, root hub port number
@@ -538,7 +553,7 @@ struct xhci_slot_ctx {
 struct xhci_ep_ctx {
 	u32	ep_info;
 	u32	ep_info2;
-	u32	deq[2];
+	u64	deq;
 	u32	tx_info;
 	/* offset 0x14 - 0x1f reserved for HC internal use */
 	u32	reserved[3];
@@ -589,18 +604,16 @@ struct xhci_ep_ctx {
 
 
 /**
- * struct xhci_device_control
- * Input/Output context; see section 6.2.5.
+ * struct xhci_input_control_context
+ * Input control context; see section 6.2.5.
  *
  * @drop_context:	set the bit of the endpoint context you want to disable
  * @add_context:	set the bit of the endpoint context you want to enable
  */
-struct xhci_device_control {
+struct xhci_input_control_ctx {
 	u32	drop_flags;
 	u32	add_flags;
-	u32	rsvd[6];
-	struct xhci_slot_ctx	slot;
-	struct xhci_ep_ctx	ep[31];
+	u32	rsvd2[6];
 };
 
 /* drop context bitmasks */
@@ -608,7 +621,6 @@ struct xhci_device_control {
 /* add context bitmasks */
 #define	ADD_EP(x)	(0x1 << x)
 
-
 struct xhci_virt_device {
 	/*
 	 * Commands to the hardware are passed an "input context" that
@@ -618,11 +630,10 @@ struct xhci_virt_device {
 	 * track of input and output contexts separately because
 	 * these commands might fail and we don't trust the hardware.
 	 */
-	struct xhci_device_control	*out_ctx;
-	dma_addr_t			out_ctx_dma;
+	struct xhci_container_ctx       *out_ctx;
 	/* Used for addressing devices and configuration changes */
-	struct xhci_device_control	*in_ctx;
-	dma_addr_t			in_ctx_dma;
+	struct xhci_container_ctx       *in_ctx;
+
 	/* FIXME when stream support is added */
 	struct xhci_ring		*ep_rings[31];
 	/* Temporary storage in case the configure endpoint command fails and we
@@ -641,7 +652,7 @@ struct xhci_virt_device {
  */
 struct xhci_device_context_array {
 	/* 64-bit device addresses; we only write 32-bit addresses */
-	u32			dev_context_ptrs[2*MAX_HC_SLOTS];
+	u64			dev_context_ptrs[MAX_HC_SLOTS];
 	/* private xHCD pointers */
 	dma_addr_t	dma;
 };
@@ -654,7 +665,7 @@ struct xhci_device_context_array {
 
 struct xhci_stream_ctx {
 	/* 64-bit stream ring address, cycle state, and stream type */
-	u32	stream_ring[2];
+	u64	stream_ring;
 	/* offset 0x14 - 0x1f reserved for HC internal use */
 	u32	reserved[2];
 };
@@ -662,7 +673,7 @@ struct xhci_stream_ctx {
 
 struct xhci_transfer_event {
 	/* 64-bit buffer address, or immediate data */
-	u32	buffer[2];
+	u64	buffer;
 	u32	transfer_len;
 	/* This field is interpreted differently based on the type of TRB */
 	u32	flags;
@@ -744,7 +755,7 @@ struct xhci_transfer_event {
 
 struct xhci_link_trb {
 	/* 64-bit segment pointer*/
-	u32 segment_ptr[2];
+	u64 segment_ptr;
 	u32 intr_target;
 	u32 control;
 };
@@ -755,7 +766,7 @@ struct xhci_link_trb {
 /* Command completion event TRB */
 struct xhci_event_cmd {
 	/* Pointer to command TRB, or the value passed by the event data trb */
-	u32 cmd_trb[2];
+	u64 cmd_trb;
 	u32 status;
 	u32 flags;
 };
@@ -848,8 +859,8 @@ union xhci_trb {
 #define TRB_CONFIG_EP		12
 /* Evaluate Context Command */
 #define TRB_EVAL_CONTEXT	13
-/* Reset Transfer Ring Command */
-#define TRB_RESET_RING		14
+/* Reset Endpoint Command */
+#define TRB_RESET_EP		14
 /* Stop Transfer Ring Command */
 #define TRB_STOP_RING		15
 /* Set Transfer Ring Dequeue Pointer Command */
@@ -929,6 +940,7 @@ struct xhci_ring {
 	unsigned int		cancels_pending;
 	unsigned int		state;
 #define SET_DEQ_PENDING		(1 << 0)
+#define EP_HALTED		(1 << 1)
 	/* The TRB that was last reported in a stopped endpoint ring */
 	union xhci_trb		*stopped_trb;
 	struct xhci_td		*stopped_td;
@@ -940,9 +952,15 @@ struct xhci_ring {
 	u32			cycle_state;
 };
 
+struct xhci_dequeue_state {
+	struct xhci_segment *new_deq_seg;
+	union xhci_trb *new_deq_ptr;
+	int new_cycle_state;
+};
+
 struct xhci_erst_entry {
 	/* 64-bit event ring segment address */
-	u32	seg_addr[2];
+	u64	seg_addr;
 	u32	seg_size;
 	/* Set to zero */
 	u32	rsvd;
@@ -957,6 +975,13 @@ struct xhci_erst {
 	unsigned int		erst_size;
 };
 
+struct xhci_scratchpad {
+	u64 *sp_array;
+	dma_addr_t sp_dma;
+	void **sp_buffers;
+	dma_addr_t *sp_dma_buffers;
+};
+
 /*
  * Each segment table entry is 4*32bits long.  1K seems like an ok size:
  * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
@@ -1011,6 +1036,9 @@ struct xhci_hcd {
 	struct xhci_ring	*cmd_ring;
 	struct xhci_ring	*event_ring;
 	struct xhci_erst	erst;
+	/* Scratchpad */
+	struct xhci_scratchpad  *scratchpad;
+
 	/* slot enabling and address device helpers */
 	struct completion	addr_dev;
 	int slot_id;
@@ -1071,13 +1099,43 @@ static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
 static inline void xhci_writel(struct xhci_hcd *xhci,
 		const unsigned int val, __u32 __iomem *regs)
 {
-	if (!in_interrupt())
-		xhci_dbg(xhci,
-			 "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
-			 regs, val);
+	xhci_dbg(xhci,
+			"`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
+			regs, val);
 	writel(val, regs);
 }
 
+/*
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Some xHCI implementations may support 64-bit address pointers.  Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
+		__u64 __iomem *regs)
+{
+	__u32 __iomem *ptr = (__u32 __iomem *) regs;
+	u64 val_lo = readl(ptr);
+	u64 val_hi = readl(ptr + 1);
+	return val_lo + (val_hi << 32);
+}
+static inline void xhci_write_64(struct xhci_hcd *xhci,
+		const u64 val, __u64 __iomem *regs)
+{
+	__u32 __iomem *ptr = (__u32 __iomem *) regs;
+	u32 val_lo = lower_32_bits(val);
+	u32 val_hi = upper_32_bits(val);
+
+	xhci_dbg(xhci,
+			"`MEM_WRITE_DWORD(3'b000, 64'h%p, 64'h%0lx, 4'hf);\n",
+			regs, (long unsigned int) val);
+	writel(val_lo, ptr);
+	writel(val_hi, ptr + 1);
+}
+
 /* xHCI debugging */
 void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
 void xhci_print_registers(struct xhci_hcd *xhci);
@@ -1090,7 +1148,7 @@ void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring);
 void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
 void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
 void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
-void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep);
+void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
 
 /* xHCI memory managment */
 void xhci_mem_cleanup(struct xhci_hcd *xhci);
@@ -1128,6 +1186,7 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
 int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
 int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
 int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
+void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
 int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
 void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
 
@@ -1148,10 +1207,23 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
 		int slot_id, unsigned int ep_index);
 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id);
+int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
+		unsigned int ep_index);
+void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		struct xhci_td *cur_td, struct xhci_dequeue_state *state);
+void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
+		struct xhci_ring *ep_ring, unsigned int slot_id,
+		unsigned int ep_index, struct xhci_dequeue_state *deq_state);
 
 /* xHCI roothub code */
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
 		char *buf, u16 wLength);
 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
 
+/* xHCI contexts */
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
+
 #endif /* __LINUX_XHCI_HCD_H */
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a68d91a11be..abe3aa67ed0 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -220,7 +220,7 @@ config USB_IOWARRIOR
 
 config USB_TEST
 	tristate "USB testing driver"
-	depends on USB && USB_DEVICEFS
+	depends on USB
 	help
 	  This driver is for testing host controller software.  It is used
 	  with specialized device firmware for regression and stress testing,
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 3c5fe5cee05..90e1a8dedfa 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/poll.h>
 #include <linux/usb/iowarrior.h>
 
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index deb95bb49fd..d645f3899fe 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -32,6 +32,7 @@
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/random.h>
 #include <linux/poll.h>
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index e0ff9ccd866..29092b8e59c 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index f8d9045d668..0f7a30b7d2d 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -1261,7 +1261,7 @@ static int mon_alloc_buff(struct mon_pgmap *map, int npages)
 			return -ENOMEM;
 		}
 		map[n].ptr = (unsigned char *) vaddr;
-		map[n].pg = virt_to_page(vaddr);
+		map[n].pg = virt_to_page((void *) vaddr);
 	}
 	return 0;
 }
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 70073b157f0..803adcb5ac1 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -12,6 +12,7 @@ config USB_MUSB_HDRC
 	depends on !SUPERH
 	select NOP_USB_XCEIV if ARCH_DAVINCI
 	select TWL4030_USB if MACH_OMAP_3430SDP
+	select NOP_USB_XCEIV if MACH_OMAP3EVM
 	select USB_OTG_UTILS
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	help
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
index 8a39de3e6e4..59bf949e589 100644
--- a/drivers/usb/musb/cppi_dma.h
+++ b/drivers/usb/musb/cppi_dma.h
@@ -5,7 +5,6 @@
 
 #include <linux/slab.h>
 #include <linux/list.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/dmapool.h>
 
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 180d7daa409..e16ff605c45 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -35,13 +35,14 @@
 #include <mach/hardware.h>
 #include <mach/memory.h>
 #include <mach/gpio.h>
+#include <mach/cputype.h>
 
 #include <asm/mach-types.h>
 
 #include "musb_core.h"
 
 #ifdef CONFIG_MACH_DAVINCI_EVM
-#define GPIO_nVBUS_DRV		87
+#define GPIO_nVBUS_DRV		144
 #endif
 
 #include "davinci.h"
@@ -329,7 +330,6 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
 			WARNING("VBUS error workaround (delay coming)\n");
 		} else if (is_host_enabled(musb) && drvvbus) {
-			musb->is_active = 1;
 			MUSB_HST_MODE(musb);
 			musb->xceiv->default_a = 1;
 			musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
@@ -343,7 +343,9 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 			portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
 		}
 
-		/* NOTE:  this must complete poweron within 100 msec */
+		/* NOTE:  this must complete poweron within 100 msec
+		 * (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
+		 */
 		davinci_source_power(musb, drvvbus, 0);
 		DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
 				drvvbus ? "on" : "off",
@@ -411,6 +413,21 @@ int __init musb_platform_init(struct musb *musb)
 		__raw_writel(phy_ctrl, USB_PHY_CTRL);
 	}
 
+	/* On dm355, the default-A state machine needs DRVVBUS control.
+	 * If we won't be a host, there's no need to turn it on.
+	 */
+	if (cpu_is_davinci_dm355()) {
+		u32	deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+		if (is_host_enabled(musb)) {
+			deepsleep &= ~DRVVBUS_OVERRIDE;
+		} else {
+			deepsleep &= ~DRVVBUS_FORCE;
+			deepsleep |= DRVVBUS_OVERRIDE;
+		}
+		__raw_writel(deepsleep, DM355_DEEPSLEEP);
+	}
+
 	/* reset the controller */
 	musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
 
@@ -437,6 +454,15 @@ int musb_platform_exit(struct musb *musb)
 	if (is_host_enabled(musb))
 		del_timer_sync(&otg_workaround);
 
+	/* force VBUS off */
+	if (cpu_is_davinci_dm355()) {
+		u32	deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+		deepsleep &= ~DRVVBUS_FORCE;
+		deepsleep |= DRVVBUS_OVERRIDE;
+		__raw_writel(deepsleep, DM355_DEEPSLEEP);
+	}
+
 	davinci_source_power(musb, 0 /*off*/, 1);
 
 	/* delay, to avoid problems with module reload */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 554a414f65d..c7c1ca0494c 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1326,7 +1326,6 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 	int		i;
 
 	/* log core options (read using indexed model) */
-	musb_ep_select(mbase, 0);
 	reg = musb_read_configdata(mbase);
 
 	strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
@@ -1990,7 +1989,7 @@ bad_config:
 	if (status < 0)
 		goto fail2;
 
-#ifdef CONFIG_USB_OTG
+#ifdef CONFIG_USB_MUSB_OTG
 	setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
 #endif
 
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index f3772ca3b2c..381d648a36b 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -38,7 +38,6 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/timer.h>
 #include <linux/clk.h>
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 40ed50ecedf..7a6778675ad 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -407,7 +407,7 @@ stall:
 					csr |= MUSB_RXCSR_P_SENDSTALL
 						| MUSB_RXCSR_FLUSHFIFO
 						| MUSB_RXCSR_CLRDATATOG
-						| MUSB_TXCSR_P_WZC_BITS;
+						| MUSB_RXCSR_P_WZC_BITS;
 					musb_writew(regs, MUSB_RXCSR,
 							csr);
 				}
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 94a2a350a41..cf94511485f 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -373,7 +373,7 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb,
 		musb_save_toggle(qh, is_in, urb);
 		break;
 	case USB_ENDPOINT_XFER_ISOC:
-		if (urb->error_count)
+		if (status == 0 && urb->error_count)
 			status = -EXDEV;
 		break;
 	}
@@ -2235,13 +2235,30 @@ static void musb_h_stop(struct usb_hcd *hcd)
 static int musb_bus_suspend(struct usb_hcd *hcd)
 {
 	struct musb	*musb = hcd_to_musb(hcd);
+	u8		devctl;
 
-	if (musb->xceiv->state == OTG_STATE_A_SUSPEND)
+	if (!is_host_active(musb))
 		return 0;
 
-	if (is_host_active(musb) && musb->is_active) {
-		WARNING("trying to suspend as %s is_active=%i\n",
-			otg_state_string(musb), musb->is_active);
+	switch (musb->xceiv->state) {
+	case OTG_STATE_A_SUSPEND:
+		return 0;
+	case OTG_STATE_A_WAIT_VRISE:
+		/* ID could be grounded even if there's no device
+		 * on the other end of the cable.  NOTE that the
+		 * A_WAIT_VRISE timers are messy with MUSB...
+		 */
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+		break;
+	default:
+		break;
+	}
+
+	if (musb->is_active) {
+		WARNING("trying to suspend as %s while active\n",
+				otg_state_string(musb));
 		return -EBUSY;
 	} else
 		return 0;
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index de3b2f18db4..fbfd3fd9ce1 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -323,6 +323,7 @@ static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
 
 static inline u8 musb_read_configdata(void __iomem *mbase)
 {
+	musb_writeb(mbase, MUSB_INDEX, 0);
 	return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
 }
 
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 69feeec1628..aa884d072f0 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -59,18 +59,4 @@ config NOP_USB_XCEIV
 	 built-in with usb ip or which are autonomous and doesn't require any
 	 phy programming such as ISP1x04 etc.
 
-config USB_LANGWELL_OTG
-	tristate "Intel Langwell USB OTG dual-role support"
-	depends on USB && MRST
-	select USB_OTG
-	select USB_OTG_UTILS
-	help
-	  Say Y here if you want to build Intel Langwell USB OTG
-	  transciever driver in kernel. This driver implements role
-	  switch between EHCI host driver and Langwell USB OTG
-	  client driver.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called langwell_otg.
-
 endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 6d1abdd3c0a..20816785652 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_USB_OTG_UTILS)	+= otg.o
 obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
-obj-$(CONFIG_USB_LANGWELL_OTG)	+= langwell_otg.o
 obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
 
 ccflags-$(CONFIG_USB_DEBUG)	+= -DDEBUG
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
deleted file mode 100644
index 6f628d0e9f3..00000000000
--- a/drivers/usb/otg/langwell_otg.c
+++ /dev/null
@@ -1,1915 +0,0 @@
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008 - 2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-/* This driver helps to switch Langwell OTG controller function between host
- * and peripheral. It works with EHCI driver and Langwell client controller
- * driver together.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/moduleparam.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/notifier.h>
-#include <asm/ipc_defs.h>
-#include <linux/delay.h>
-#include "../core/hcd.h"
-
-#include <linux/usb/langwell_otg.h>
-
-#define	DRIVER_DESC		"Intel Langwell USB OTG transceiver driver"
-#define	DRIVER_VERSION		"3.0.0.32L.0002"
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
-
-static const char driver_name[] = "langwell_otg";
-
-static int langwell_otg_probe(struct pci_dev *pdev,
-			const struct pci_device_id *id);
-static void langwell_otg_remove(struct pci_dev *pdev);
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message);
-static int langwell_otg_resume(struct pci_dev *pdev);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
-				struct usb_bus *host);
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
-				struct usb_gadget *gadget);
-static int langwell_otg_start_srp(struct otg_transceiver *otg);
-
-static const struct pci_device_id pci_ids[] = {{
-	.class =        ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
-	.class_mask =   ~0,
-	.vendor =	0x8086,
-	.device =	0x0811,
-	.subvendor =	PCI_ANY_ID,
-	.subdevice =	PCI_ANY_ID,
-}, { /* end: all zeroes */ }
-};
-
-static struct pci_driver otg_pci_driver = {
-	.name =		(char *) driver_name,
-	.id_table =	pci_ids,
-
-	.probe =	langwell_otg_probe,
-	.remove =	langwell_otg_remove,
-
-	.suspend =	langwell_otg_suspend,
-	.resume =	langwell_otg_resume,
-};
-
-static const char *state_string(enum usb_otg_state state)
-{
-	switch (state) {
-	case OTG_STATE_A_IDLE:
-		return "a_idle";
-	case OTG_STATE_A_WAIT_VRISE:
-		return "a_wait_vrise";
-	case OTG_STATE_A_WAIT_BCON:
-		return "a_wait_bcon";
-	case OTG_STATE_A_HOST:
-		return "a_host";
-	case OTG_STATE_A_SUSPEND:
-		return "a_suspend";
-	case OTG_STATE_A_PERIPHERAL:
-		return "a_peripheral";
-	case OTG_STATE_A_WAIT_VFALL:
-		return "a_wait_vfall";
-	case OTG_STATE_A_VBUS_ERR:
-		return "a_vbus_err";
-	case OTG_STATE_B_IDLE:
-		return "b_idle";
-	case OTG_STATE_B_SRP_INIT:
-		return "b_srp_init";
-	case OTG_STATE_B_PERIPHERAL:
-		return "b_peripheral";
-	case OTG_STATE_B_WAIT_ACON:
-		return "b_wait_acon";
-	case OTG_STATE_B_HOST:
-		return "b_host";
-	default:
-		return "UNDEFINED";
-	}
-}
-
-/* HSM timers */
-static inline struct langwell_otg_timer *otg_timer_initializer
-(void (*function)(unsigned long), unsigned long expires, unsigned long data)
-{
-	struct langwell_otg_timer *timer;
-	timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL);
-	timer->function = function;
-	timer->expires = expires;
-	timer->data = data;
-	return timer;
-}
-
-static struct langwell_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr,
-	*a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_res_tmr,
-	*b_bus_suspend_tmr;
-
-static struct list_head active_timers;
-
-static struct langwell_otg *the_transceiver;
-
-/* host/client notify transceiver when event affects HNP state */
-void langwell_update_transceiver()
-{
-	otg_dbg("transceiver driver is notified\n");
-	queue_work(the_transceiver->qwork, &the_transceiver->work);
-}
-EXPORT_SYMBOL(langwell_update_transceiver);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
-					struct usb_bus *host)
-{
-	otg->host = host;
-
-	return 0;
-}
-
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
-					struct usb_gadget *gadget)
-{
-	otg->gadget = gadget;
-
-	return 0;
-}
-
-static int langwell_otg_set_power(struct otg_transceiver *otg,
-				unsigned mA)
-{
-	return 0;
-}
-
-/* A-device drives vbus, controlled through PMIC CHRGCNTL register*/
-static void langwell_otg_drv_vbus(int on)
-{
-	struct ipc_pmic_reg_data	pmic_data = {0};
-	struct ipc_pmic_reg_data	battery_data;
-
-	/* Check if battery is attached or not */
-	battery_data.pmic_reg_data[0].register_address = 0xd2;
-	battery_data.ioc = 0;
-	battery_data.num_entries = 1;
-	if (ipc_pmic_register_read(&battery_data)) {
-		otg_dbg("Failed to read PMIC register 0xd2.\n");
-		return;
-	}
-
-	if ((battery_data.pmic_reg_data[0].value & 0x20) == 0) {
-		otg_dbg("no battery attached\n");
-		return;
-	}
-
-	/* Workaround for battery attachment issue */
-	if (battery_data.pmic_reg_data[0].value == 0x34) {
-		otg_dbg("battery \n");
-		return;
-	}
-
-	otg_dbg("battery attached\n");
-
-	pmic_data.ioc = 0;
-	pmic_data.pmic_reg_data[0].register_address = 0xD4;
-	pmic_data.num_entries = 1;
-	if (on)
-		pmic_data.pmic_reg_data[0].value = 0x20;
-	else
-		pmic_data.pmic_reg_data[0].value = 0xc0;
-
-	if (ipc_pmic_register_write(&pmic_data, TRUE))
-		otg_dbg("Failed to write PMIC.\n");
-
-}
-
-/* charge vbus or discharge vbus through a resistor to ground */
-static void langwell_otg_chrg_vbus(int on)
-{
-
-	u32	val;
-
-	val = readl(the_transceiver->regs + CI_OTGSC);
-
-	if (on)
-		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC,
-				the_transceiver->regs + CI_OTGSC);
-	else
-		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD,
-				the_transceiver->regs + CI_OTGSC);
-
-}
-
-/* Start SRP */
-static int langwell_otg_start_srp(struct otg_transceiver *otg)
-{
-	u32	val;
-
-	otg_dbg("Start SRP ->\n");
-
-	val = readl(the_transceiver->regs + CI_OTGSC);
-
-	writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP,
-		the_transceiver->regs + CI_OTGSC);
-
-	/* Check if the data plus is finished or not */
-	msleep(8);
-	val = readl(the_transceiver->regs + CI_OTGSC);
-	if (val & (OTGSC_HADP | OTGSC_DP))
-		otg_dbg("DataLine SRP Error\n");
-
-	/* FIXME: VBus SRP */
-
-	return 0;
-}
-
-
-/* stop SOF via bus_suspend */
-static void langwell_otg_loc_sof(int on)
-{
-	struct usb_hcd	*hcd;
-	int		err;
-
-	otg_dbg("loc_sof -> %d\n", on);
-
-	hcd = bus_to_hcd(the_transceiver->otg.host);
-	if (on)
-		err = hcd->driver->bus_resume(hcd);
-	else
-		err = hcd->driver->bus_suspend(hcd);
-
-	if (err)
-		otg_dbg("Failed to resume/suspend bus - %d\n", err);
-}
-
-static void langwell_otg_phy_low_power(int on)
-{
-	u32	val;
-
-	otg_dbg("phy low power mode-> %d\n", on);
-
-	val = readl(the_transceiver->regs + CI_HOSTPC1);
-	if (on)
-		writel(val | HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
-	else
-		writel(val & ~HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
-}
-
-/* Enable/Disable OTG interrupt */
-static void langwell_otg_intr(int on)
-{
-	u32 val;
-
-	otg_dbg("interrupt -> %d\n", on);
-
-	val = readl(the_transceiver->regs + CI_OTGSC);
-	if (on) {
-		val = val | (OTGSC_INTEN_MASK | OTGSC_IDPU);
-		writel(val, the_transceiver->regs + CI_OTGSC);
-	} else {
-		val = val & ~(OTGSC_INTEN_MASK | OTGSC_IDPU);
-		writel(val, the_transceiver->regs + CI_OTGSC);
-	}
-}
-
-/* set HAAR: Hardware Assist Auto-Reset */
-static void langwell_otg_HAAR(int on)
-{
-	u32	val;
-
-	otg_dbg("HAAR -> %d\n", on);
-
-	val = readl(the_transceiver->regs + CI_OTGSC);
-	if (on)
-		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR,
-				the_transceiver->regs + CI_OTGSC);
-	else
-		writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR,
-				the_transceiver->regs + CI_OTGSC);
-}
-
-/* set HABA: Hardware Assist B-Disconnect to A-Connect */
-static void langwell_otg_HABA(int on)
-{
-	u32	val;
-
-	otg_dbg("HABA -> %d\n", on);
-
-	val = readl(the_transceiver->regs + CI_OTGSC);
-	if (on)
-		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA,
-				the_transceiver->regs + CI_OTGSC);
-	else
-		writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA,
-				the_transceiver->regs + CI_OTGSC);
-}
-
-static int langwell_otg_check_se0_srp(int on)
-{
-	u32 val;
-
-	int delay_time = TB_SE0_SRP * 10; /* step is 100us */
-
-	otg_dbg("check_se0_srp -> \n");
-
-	do {
-		udelay(100);
-		if (!delay_time--)
-			break;
-		val = readl(the_transceiver->regs + CI_PORTSC1);
-		val &= PORTSC_LS;
-	} while (!val);
-
-	otg_dbg("check_se0_srp <- \n");
-	return val;
-}
-
-/* The timeout callback function to set time out bit */
-static void set_tmout(unsigned long indicator)
-{
-	*(int *)indicator = 1;
-}
-
-void langwell_otg_nsf_msg(unsigned long indicator)
-{
-	switch (indicator) {
-	case 2:
-	case 4:
-	case 6:
-	case 7:
-		printk(KERN_ERR "OTG:NSF-%lu - deivce not responding\n",
-				indicator);
-		break;
-	case 3:
-		printk(KERN_ERR "OTG:NSF-%lu - deivce not supported\n",
-				indicator);
-		break;
-	default:
-		printk(KERN_ERR "Do not have this kind of NSF\n");
-		break;
-	}
-}
-
-/* Initialize timers */
-static void langwell_otg_init_timers(struct otg_hsm *hsm)
-{
-	/* HSM used timers */
-	a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
-				(unsigned long)&hsm->a_wait_vrise_tmout);
-	a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
-				(unsigned long)&hsm->a_wait_bcon_tmout);
-	a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
-				(unsigned long)&hsm->a_aidl_bdis_tmout);
-	b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
-				(unsigned long)&hsm->b_ase0_brst_tmout);
-	b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
-				(unsigned long)&hsm->b_se0_srp);
-	b_srp_res_tmr = otg_timer_initializer(&set_tmout, TB_SRP_RES,
-				(unsigned long)&hsm->b_srp_res_tmout);
-	b_bus_suspend_tmr = otg_timer_initializer(&set_tmout, TB_BUS_SUSPEND,
-				(unsigned long)&hsm->b_bus_suspend_tmout);
-}
-
-/* Free timers */
-static void langwell_otg_free_timers(void)
-{
-	kfree(a_wait_vrise_tmr);
-	kfree(a_wait_bcon_tmr);
-	kfree(a_aidl_bdis_tmr);
-	kfree(b_ase0_brst_tmr);
-	kfree(b_se0_srp_tmr);
-	kfree(b_srp_res_tmr);
-	kfree(b_bus_suspend_tmr);
-}
-
-/* Add timer to timer list */
-static void langwell_otg_add_timer(void *gtimer)
-{
-	struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
-	struct langwell_otg_timer *tmp_timer;
-	u32	val32;
-
-	/* Check if the timer is already in the active list,
-	 * if so update timer count
-	 */
-	list_for_each_entry(tmp_timer, &active_timers, list)
-		if (tmp_timer == timer) {
-			timer->count = timer->expires;
-			return;
-		}
-	timer->count = timer->expires;
-
-	if (list_empty(&active_timers)) {
-		val32 = readl(the_transceiver->regs + CI_OTGSC);
-		writel(val32 | OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
-	}
-
-	list_add_tail(&timer->list, &active_timers);
-}
-
-/* Remove timer from the timer list; clear timeout status */
-static void langwell_otg_del_timer(void *gtimer)
-{
-	struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
-	struct langwell_otg_timer *tmp_timer, *del_tmp;
-	u32 val32;
-
-	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
-		if (tmp_timer == timer)
-			list_del(&timer->list);
-
-	if (list_empty(&active_timers)) {
-		val32 = readl(the_transceiver->regs + CI_OTGSC);
-		writel(val32 & ~OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
-	}
-}
-
-/* Reduce timer count by 1, and find timeout conditions.*/
-static int langwell_otg_tick_timer(u32 *int_sts)
-{
-	struct langwell_otg_timer *tmp_timer, *del_tmp;
-	int expired = 0;
-
-	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
-		tmp_timer->count--;
-		/* check if timer expires */
-		if (!tmp_timer->count) {
-			list_del(&tmp_timer->list);
-			tmp_timer->function(tmp_timer->data);
-			expired = 1;
-		}
-	}
-
-	if (list_empty(&active_timers)) {
-		otg_dbg("tick timer: disable 1ms int\n");
-		*int_sts = *int_sts & ~OTGSC_1MSE;
-	}
-	return expired;
-}
-
-static void reset_otg(void)
-{
-	u32	val;
-	int	delay_time = 1000;
-
-	otg_dbg("reseting OTG controller ...\n");
-	val = readl(the_transceiver->regs + CI_USBCMD);
-	writel(val | USBCMD_RST, the_transceiver->regs + CI_USBCMD);
-	do {
-		udelay(100);
-		if (!delay_time--)
-			otg_dbg("reset timeout\n");
-		val = readl(the_transceiver->regs + CI_USBCMD);
-		val &= USBCMD_RST;
-	} while (val != 0);
-	otg_dbg("reset done.\n");
-}
-
-static void set_host_mode(void)
-{
-	u32 	val;
-
-	reset_otg();
-	val = readl(the_transceiver->regs + CI_USBMODE);
-	val = (val & (~USBMODE_CM)) | USBMODE_HOST;
-	writel(val, the_transceiver->regs + CI_USBMODE);
-}
-
-static void set_client_mode(void)
-{
-	u32 	val;
-
-	reset_otg();
-	val = readl(the_transceiver->regs + CI_USBMODE);
-	val = (val & (~USBMODE_CM)) | USBMODE_DEVICE;
-	writel(val, the_transceiver->regs + CI_USBMODE);
-}
-
-static void init_hsm(void)
-{
-	struct langwell_otg	*langwell = the_transceiver;
-	u32			val32;
-
-	/* read OTGSC after reset */
-	val32 = readl(langwell->regs + CI_OTGSC);
-	otg_dbg("%s: OTGSC init value = 0x%x\n", __func__, val32);
-
-	/* set init state */
-	if (val32 & OTGSC_ID) {
-		langwell->hsm.id = 1;
-		langwell->otg.default_a = 0;
-		set_client_mode();
-		langwell->otg.state = OTG_STATE_B_IDLE;
-		langwell_otg_drv_vbus(0);
-	} else {
-		langwell->hsm.id = 0;
-		langwell->otg.default_a = 1;
-		set_host_mode();
-		langwell->otg.state = OTG_STATE_A_IDLE;
-	}
-
-	/* set session indicator */
-	if (val32 & OTGSC_BSE)
-		langwell->hsm.b_sess_end = 1;
-	if (val32 & OTGSC_BSV)
-		langwell->hsm.b_sess_vld = 1;
-	if (val32 & OTGSC_ASV)
-		langwell->hsm.a_sess_vld = 1;
-	if (val32 & OTGSC_AVV)
-		langwell->hsm.a_vbus_vld = 1;
-
-	/* defautly power the bus */
-	langwell->hsm.a_bus_req = 1;
-	langwell->hsm.a_bus_drop = 0;
-	/* defautly don't request bus as B device */
-	langwell->hsm.b_bus_req = 0;
-	/* no system error */
-	langwell->hsm.a_clr_err = 0;
-}
-
-static irqreturn_t otg_dummy_irq(int irq, void *_dev)
-{
-	void __iomem	*reg_base = _dev;
-	u32	val;
-	u32	int_mask = 0;
-
-	val = readl(reg_base + CI_USBMODE);
-	if ((val & USBMODE_CM) != USBMODE_DEVICE)
-		return IRQ_NONE;
-
-	val = readl(reg_base + CI_USBSTS);
-	int_mask = val & INTR_DUMMY_MASK;
-
-	if (int_mask == 0)
-		return IRQ_NONE;
-
-	/* clear hsm.b_conn here since host driver can't detect it
-	*  otg_dummy_irq called means B-disconnect happened.
-	*/
-	if (the_transceiver->hsm.b_conn) {
-		the_transceiver->hsm.b_conn = 0;
-		if (spin_trylock(&the_transceiver->wq_lock)) {
-			queue_work(the_transceiver->qwork,
-				&the_transceiver->work);
-			spin_unlock(&the_transceiver->wq_lock);
-		}
-	}
-	/* Clear interrupts */
-	writel(int_mask, reg_base + CI_USBSTS);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t otg_irq(int irq, void *_dev)
-{
-	struct	langwell_otg *langwell = _dev;
-	u32	int_sts, int_en;
-	u32	int_mask = 0;
-	int	flag = 0;
-
-	int_sts = readl(langwell->regs + CI_OTGSC);
-	int_en = (int_sts & OTGSC_INTEN_MASK) >> 8;
-	int_mask = int_sts & int_en;
-	if (int_mask == 0)
-		return IRQ_NONE;
-
-	if (int_mask & OTGSC_IDIS) {
-		otg_dbg("%s: id change int\n", __func__);
-		langwell->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0;
-		flag = 1;
-	}
-	if (int_mask & OTGSC_DPIS) {
-		otg_dbg("%s: data pulse int\n", __func__);
-		langwell->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0;
-		flag = 1;
-	}
-	if (int_mask & OTGSC_BSEIS) {
-		otg_dbg("%s: b session end int\n", __func__);
-		langwell->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0;
-		flag = 1;
-	}
-	if (int_mask & OTGSC_BSVIS) {
-		otg_dbg("%s: b session valid int\n", __func__);
-		langwell->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0;
-		flag = 1;
-	}
-	if (int_mask & OTGSC_ASVIS) {
-		otg_dbg("%s: a session valid int\n", __func__);
-		langwell->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0;
-		flag = 1;
-	}
-	if (int_mask & OTGSC_AVVIS) {
-		otg_dbg("%s: a vbus valid int\n", __func__);
-		langwell->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0;
-		flag = 1;
-	}
-
-	if (int_mask & OTGSC_1MSS) {
-		/* need to schedule otg_work if any timer is expired */
-		if (langwell_otg_tick_timer(&int_sts))
-			flag = 1;
-	}
-
-	writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask,
-			langwell->regs + CI_OTGSC);
-	if (flag)
-		queue_work(langwell->qwork, &langwell->work);
-
-	return IRQ_HANDLED;
-}
-
-static void langwell_otg_work(struct work_struct *work)
-{
-	struct langwell_otg *langwell = container_of(work,
-					struct langwell_otg, work);
-	int	retval;
-
-	otg_dbg("%s: old state = %s\n", __func__,
-			state_string(langwell->otg.state));
-
-	switch (langwell->otg.state) {
-	case OTG_STATE_UNDEFINED:
-	case OTG_STATE_B_IDLE:
-		if (!langwell->hsm.id) {
-			langwell_otg_del_timer(b_srp_res_tmr);
-			langwell->otg.default_a = 1;
-			langwell->hsm.a_srp_det = 0;
-
-			langwell_otg_chrg_vbus(0);
-			langwell_otg_drv_vbus(0);
-
-			set_host_mode();
-			langwell->otg.state = OTG_STATE_A_IDLE;
-			queue_work(langwell->qwork, &langwell->work);
-		} else if (langwell->hsm.b_srp_res_tmout) {
-			langwell->hsm.b_srp_res_tmout = 0;
-			langwell->hsm.b_bus_req = 0;
-			langwell_otg_nsf_msg(6);
-		} else if (langwell->hsm.b_sess_vld) {
-			langwell_otg_del_timer(b_srp_res_tmr);
-			langwell->hsm.b_sess_end = 0;
-			langwell->hsm.a_bus_suspend = 0;
-
-			langwell_otg_chrg_vbus(0);
-			if (langwell->client_ops) {
-				langwell->client_ops->resume(langwell->pdev);
-				langwell->otg.state = OTG_STATE_B_PERIPHERAL;
-			} else
-				otg_dbg("client driver not loaded.\n");
-
-		} else if (langwell->hsm.b_bus_req &&
-				(langwell->hsm.b_sess_end)) {
-			/* workaround for b_se0_srp detection */
-			retval = langwell_otg_check_se0_srp(0);
-			if (retval) {
-				langwell->hsm.b_bus_req = 0;
-				otg_dbg("LS is not SE0, try again later\n");
-			} else {
-				/* Start SRP */
-				langwell_otg_start_srp(&langwell->otg);
-				langwell_otg_add_timer(b_srp_res_tmr);
-			}
-		}
-		break;
-	case OTG_STATE_B_SRP_INIT:
-		if (!langwell->hsm.id) {
-			langwell->otg.default_a = 1;
-			langwell->hsm.a_srp_det = 0;
-
-			langwell_otg_drv_vbus(0);
-			langwell_otg_chrg_vbus(0);
-
-			langwell->otg.state = OTG_STATE_A_IDLE;
-			queue_work(langwell->qwork, &langwell->work);
-		} else if (langwell->hsm.b_sess_vld) {
-			langwell_otg_chrg_vbus(0);
-			if (langwell->client_ops) {
-				langwell->client_ops->resume(langwell->pdev);
-				langwell->otg.state = OTG_STATE_B_PERIPHERAL;
-			} else
-				otg_dbg("client driver not loaded.\n");
-		}
-		break;
-	case OTG_STATE_B_PERIPHERAL:
-		if (!langwell->hsm.id) {
-			langwell->otg.default_a = 1;
-			langwell->hsm.a_srp_det = 0;
-
-			langwell_otg_drv_vbus(0);
-			langwell_otg_chrg_vbus(0);
-			set_host_mode();
-
-			if (langwell->client_ops) {
-				langwell->client_ops->suspend(langwell->pdev,
-					PMSG_FREEZE);
-			} else
-				otg_dbg("client driver has been removed.\n");
-
-			langwell->otg.state = OTG_STATE_A_IDLE;
-			queue_work(langwell->qwork, &langwell->work);
-		} else if (!langwell->hsm.b_sess_vld) {
-			langwell->hsm.b_hnp_enable = 0;
-
-			if (langwell->client_ops) {
-				langwell->client_ops->suspend(langwell->pdev,
-					PMSG_FREEZE);
-			} else
-				otg_dbg("client driver has been removed.\n");
-
-			langwell->otg.state = OTG_STATE_B_IDLE;
-		} else if (langwell->hsm.b_bus_req && langwell->hsm.b_hnp_enable
-			&& langwell->hsm.a_bus_suspend) {
-
-			if (langwell->client_ops) {
-				langwell->client_ops->suspend(langwell->pdev,
-					PMSG_FREEZE);
-			} else
-				otg_dbg("client driver has been removed.\n");
-
-			langwell_otg_HAAR(1);
-			langwell->hsm.a_conn = 0;
-
-			if (langwell->host_ops) {
-				langwell->host_ops->probe(langwell->pdev,
-					langwell->host_ops->id_table);
-				langwell->otg.state = OTG_STATE_B_WAIT_ACON;
-			} else
-				otg_dbg("host driver not loaded.\n");
-
-			langwell->hsm.a_bus_resume = 0;
-			langwell->hsm.b_ase0_brst_tmout = 0;
-			langwell_otg_add_timer(b_ase0_brst_tmr);
-		}
-		break;
-
-	case OTG_STATE_B_WAIT_ACON:
-		if (!langwell->hsm.id) {
-			langwell_otg_del_timer(b_ase0_brst_tmr);
-			langwell->otg.default_a = 1;
-			langwell->hsm.a_srp_det = 0;
-
-			langwell_otg_drv_vbus(0);
-			langwell_otg_chrg_vbus(0);
-			set_host_mode();
-
-			langwell_otg_HAAR(0);
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-			langwell->otg.state = OTG_STATE_A_IDLE;
-			queue_work(langwell->qwork, &langwell->work);
-		} else if (!langwell->hsm.b_sess_vld) {
-			langwell_otg_del_timer(b_ase0_brst_tmr);
-			langwell->hsm.b_hnp_enable = 0;
-			langwell->hsm.b_bus_req = 0;
-			langwell_otg_chrg_vbus(0);
-			langwell_otg_HAAR(0);
-
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-			langwell->otg.state = OTG_STATE_B_IDLE;
-		} else if (langwell->hsm.a_conn) {
-			langwell_otg_del_timer(b_ase0_brst_tmr);
-			langwell_otg_HAAR(0);
-			langwell->otg.state = OTG_STATE_B_HOST;
-			queue_work(langwell->qwork, &langwell->work);
-		} else if (langwell->hsm.a_bus_resume ||
-				langwell->hsm.b_ase0_brst_tmout) {
-			langwell_otg_del_timer(b_ase0_brst_tmr);
-			langwell_otg_HAAR(0);
-			langwell_otg_nsf_msg(7);
-
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-
-			langwell->hsm.a_bus_suspend = 0;
-			langwell->hsm.b_bus_req = 0;
-
-			if (langwell->client_ops)
-				langwell->client_ops->resume(langwell->pdev);
-			else
-				otg_dbg("client driver not loaded.\n");
-
-			langwell->otg.state = OTG_STATE_B_PERIPHERAL;
-		}
-		break;
-
-	case OTG_STATE_B_HOST:
-		if (!langwell->hsm.id) {
-			langwell->otg.default_a = 1;
-			langwell->hsm.a_srp_det = 0;
-
-			langwell_otg_drv_vbus(0);
-			langwell_otg_chrg_vbus(0);
-			set_host_mode();
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-			langwell->otg.state = OTG_STATE_A_IDLE;
-			queue_work(langwell->qwork, &langwell->work);
-		} else if (!langwell->hsm.b_sess_vld) {
-			langwell->hsm.b_hnp_enable = 0;
-			langwell->hsm.b_bus_req = 0;
-			langwell_otg_chrg_vbus(0);
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-			langwell->otg.state = OTG_STATE_B_IDLE;
-		} else if ((!langwell->hsm.b_bus_req) ||
-				(!langwell->hsm.a_conn)) {
-			langwell->hsm.b_bus_req = 0;
-			langwell_otg_loc_sof(0);
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-
-			langwell->hsm.a_bus_suspend = 0;
-
-			if (langwell->client_ops)
-				langwell->client_ops->resume(langwell->pdev);
-			else
-				otg_dbg("client driver not loaded.\n");
-
-			langwell->otg.state = OTG_STATE_B_PERIPHERAL;
-		}
-		break;
-
-	case OTG_STATE_A_IDLE:
-		langwell->otg.default_a = 1;
-		if (langwell->hsm.id) {
-			langwell->otg.default_a = 0;
-			langwell->hsm.b_bus_req = 0;
-			langwell_otg_drv_vbus(0);
-			langwell_otg_chrg_vbus(0);
-
-			langwell->otg.state = OTG_STATE_B_IDLE;
-			queue_work(langwell->qwork, &langwell->work);
-		} else if (langwell->hsm.a_sess_vld) {
-			langwell_otg_drv_vbus(1);
-			langwell->hsm.a_srp_det = 1;
-			langwell->hsm.a_wait_vrise_tmout = 0;
-			langwell_otg_add_timer(a_wait_vrise_tmr);
-			langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
-			queue_work(langwell->qwork, &langwell->work);
-		} else if (!langwell->hsm.a_bus_drop &&
-			(langwell->hsm.a_srp_det || langwell->hsm.a_bus_req)) {
-			langwell_otg_drv_vbus(1);
-			langwell->hsm.a_wait_vrise_tmout = 0;
-			langwell_otg_add_timer(a_wait_vrise_tmr);
-			langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
-			queue_work(langwell->qwork, &langwell->work);
-		}
-		break;
-	case OTG_STATE_A_WAIT_VRISE:
-		if (langwell->hsm.id) {
-			langwell_otg_del_timer(a_wait_vrise_tmr);
-			langwell->hsm.b_bus_req = 0;
-			langwell->otg.default_a = 0;
-			langwell_otg_drv_vbus(0);
-			langwell->otg.state = OTG_STATE_B_IDLE;
-		} else if (langwell->hsm.a_vbus_vld) {
-			langwell_otg_del_timer(a_wait_vrise_tmr);
-			if (langwell->host_ops)
-				langwell->host_ops->probe(langwell->pdev,
-						langwell->host_ops->id_table);
-			else
-				otg_dbg("host driver not loaded.\n");
-			langwell->hsm.b_conn = 0;
-			langwell->hsm.a_set_b_hnp_en = 0;
-			langwell->hsm.a_wait_bcon_tmout = 0;
-			langwell_otg_add_timer(a_wait_bcon_tmr);
-			langwell->otg.state = OTG_STATE_A_WAIT_BCON;
-		} else if (langwell->hsm.a_wait_vrise_tmout) {
-			if (langwell->hsm.a_vbus_vld) {
-				if (langwell->host_ops)
-					langwell->host_ops->probe(
-						langwell->pdev,
-						langwell->host_ops->id_table);
-				else
-					otg_dbg("host driver not loaded.\n");
-				langwell->hsm.b_conn = 0;
-				langwell->hsm.a_set_b_hnp_en = 0;
-				langwell->hsm.a_wait_bcon_tmout = 0;
-				langwell_otg_add_timer(a_wait_bcon_tmr);
-				langwell->otg.state = OTG_STATE_A_WAIT_BCON;
-			} else {
-				langwell_otg_drv_vbus(0);
-				langwell->otg.state = OTG_STATE_A_VBUS_ERR;
-			}
-		}
-		break;
-	case OTG_STATE_A_WAIT_BCON:
-		if (langwell->hsm.id) {
-			langwell_otg_del_timer(a_wait_bcon_tmr);
-
-			langwell->otg.default_a = 0;
-			langwell->hsm.b_bus_req = 0;
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-			langwell_otg_drv_vbus(0);
-			langwell->otg.state = OTG_STATE_B_IDLE;
-			queue_work(langwell->qwork, &langwell->work);
-		} else if (!langwell->hsm.a_vbus_vld) {
-			langwell_otg_del_timer(a_wait_bcon_tmr);
-
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-			langwell_otg_drv_vbus(0);
-			langwell->otg.state = OTG_STATE_A_VBUS_ERR;
-		} else if (langwell->hsm.a_bus_drop ||
-				(langwell->hsm.a_wait_bcon_tmout &&
-				!langwell->hsm.a_bus_req)) {
-			langwell_otg_del_timer(a_wait_bcon_tmr);
-
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-			langwell_otg_drv_vbus(0);
-			langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
-		} else if (langwell->hsm.b_conn) {
-			langwell_otg_del_timer(a_wait_bcon_tmr);
-
-			langwell->hsm.a_suspend_req = 0;
-			langwell->otg.state = OTG_STATE_A_HOST;
-			if (!langwell->hsm.a_bus_req &&
-				langwell->hsm.a_set_b_hnp_en) {
-				/* It is not safe enough to do a fast
-				 * transistion from A_WAIT_BCON to
-				 * A_SUSPEND */
-				msleep(10000);
-				if (langwell->hsm.a_bus_req)
-					break;
-
-				if (request_irq(langwell->pdev->irq,
-					otg_dummy_irq, IRQF_SHARED,
-					driver_name, langwell->regs) != 0) {
-					otg_dbg("request interrupt %d fail\n",
-					langwell->pdev->irq);
-				}
-
-				langwell_otg_HABA(1);
-				langwell->hsm.b_bus_resume = 0;
-				langwell->hsm.a_aidl_bdis_tmout = 0;
-				langwell_otg_add_timer(a_aidl_bdis_tmr);
-
-				langwell_otg_loc_sof(0);
-				langwell->otg.state = OTG_STATE_A_SUSPEND;
-			} else if (!langwell->hsm.a_bus_req &&
-				!langwell->hsm.a_set_b_hnp_en) {
-				struct pci_dev *pdev = langwell->pdev;
-				if (langwell->host_ops)
-					langwell->host_ops->remove(pdev);
-				else
-					otg_dbg("host driver removed.\n");
-				langwell_otg_drv_vbus(0);
-				langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
-			}
-		}
-		break;
-	case OTG_STATE_A_HOST:
-		if (langwell->hsm.id) {
-			langwell->otg.default_a = 0;
-			langwell->hsm.b_bus_req = 0;
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-			langwell_otg_drv_vbus(0);
-			langwell->otg.state = OTG_STATE_B_IDLE;
-			queue_work(langwell->qwork, &langwell->work);
-		} else if (langwell->hsm.a_bus_drop ||
-		(!langwell->hsm.a_set_b_hnp_en && !langwell->hsm.a_bus_req)) {
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-			langwell_otg_drv_vbus(0);
-			langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
-		} else if (!langwell->hsm.a_vbus_vld) {
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-			langwell_otg_drv_vbus(0);
-			langwell->otg.state = OTG_STATE_A_VBUS_ERR;
-		} else if (langwell->hsm.a_set_b_hnp_en
-				&& !langwell->hsm.a_bus_req) {
-			/* Set HABA to enable hardware assistance to signal
-			 *  A-connect after receiver B-disconnect. Hardware
-			 *  will then set client mode and enable URE, SLE and
-			 *  PCE after the assistance. otg_dummy_irq is used to
-			 *  clean these ints when client driver is not resumed.
-			 */
-			if (request_irq(langwell->pdev->irq,
-				otg_dummy_irq, IRQF_SHARED, driver_name,
-				langwell->regs) != 0) {
-				otg_dbg("request interrupt %d failed\n",
-						langwell->pdev->irq);
-			}
-
-			/* set HABA */
-			langwell_otg_HABA(1);
-			langwell->hsm.b_bus_resume = 0;
-			langwell->hsm.a_aidl_bdis_tmout = 0;
-			langwell_otg_add_timer(a_aidl_bdis_tmr);
-			langwell_otg_loc_sof(0);
-			langwell->otg.state = OTG_STATE_A_SUSPEND;
-		} else if (!langwell->hsm.b_conn || !langwell->hsm.a_bus_req) {
-			langwell->hsm.a_wait_bcon_tmout = 0;
-			langwell->hsm.a_set_b_hnp_en = 0;
-			langwell_otg_add_timer(a_wait_bcon_tmr);
-			langwell->otg.state = OTG_STATE_A_WAIT_BCON;
-		}
-		break;
-	case OTG_STATE_A_SUSPEND:
-		if (langwell->hsm.id) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(langwell->pdev->irq, langwell->regs);
-			langwell->otg.default_a = 0;
-			langwell->hsm.b_bus_req = 0;
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-			langwell_otg_drv_vbus(0);
-			langwell->otg.state = OTG_STATE_B_IDLE;
-			queue_work(langwell->qwork, &langwell->work);
-		} else if (langwell->hsm.a_bus_req ||
-				langwell->hsm.b_bus_resume) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(langwell->pdev->irq, langwell->regs);
-			langwell->hsm.a_suspend_req = 0;
-			langwell_otg_loc_sof(1);
-			langwell->otg.state = OTG_STATE_A_HOST;
-		} else if (langwell->hsm.a_aidl_bdis_tmout ||
-				langwell->hsm.a_bus_drop) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(langwell->pdev->irq, langwell->regs);
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-			langwell_otg_drv_vbus(0);
-			langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
-		} else if (!langwell->hsm.b_conn &&
-				langwell->hsm.a_set_b_hnp_en) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(langwell->pdev->irq, langwell->regs);
-
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-
-			langwell->hsm.b_bus_suspend = 0;
-			langwell->hsm.b_bus_suspend_vld = 0;
-			langwell->hsm.b_bus_suspend_tmout = 0;
-
-			/* msleep(200); */
-			if (langwell->client_ops)
-				langwell->client_ops->resume(langwell->pdev);
-			else
-				otg_dbg("client driver not loaded.\n");
-
-			langwell_otg_add_timer(b_bus_suspend_tmr);
-			langwell->otg.state = OTG_STATE_A_PERIPHERAL;
-			break;
-		} else if (!langwell->hsm.a_vbus_vld) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(langwell->pdev->irq, langwell->regs);
-			if (langwell->host_ops)
-				langwell->host_ops->remove(langwell->pdev);
-			else
-				otg_dbg("host driver has been removed.\n");
-			langwell_otg_drv_vbus(0);
-			langwell->otg.state = OTG_STATE_A_VBUS_ERR;
-		}
-		break;
-	case OTG_STATE_A_PERIPHERAL:
-		if (langwell->hsm.id) {
-			langwell_otg_del_timer(b_bus_suspend_tmr);
-			langwell->otg.default_a = 0;
-			langwell->hsm.b_bus_req = 0;
-			if (langwell->client_ops)
-				langwell->client_ops->suspend(langwell->pdev,
-					PMSG_FREEZE);
-			else
-				otg_dbg("client driver has been removed.\n");
-			langwell_otg_drv_vbus(0);
-			langwell->otg.state = OTG_STATE_B_IDLE;
-			queue_work(langwell->qwork, &langwell->work);
-		} else if (!langwell->hsm.a_vbus_vld) {
-			langwell_otg_del_timer(b_bus_suspend_tmr);
-			if (langwell->client_ops)
-				langwell->client_ops->suspend(langwell->pdev,
-					PMSG_FREEZE);
-			else
-				otg_dbg("client driver has been removed.\n");
-			langwell_otg_drv_vbus(0);
-			langwell->otg.state = OTG_STATE_A_VBUS_ERR;
-		} else if (langwell->hsm.a_bus_drop) {
-			langwell_otg_del_timer(b_bus_suspend_tmr);
-			if (langwell->client_ops)
-				langwell->client_ops->suspend(langwell->pdev,
-					PMSG_FREEZE);
-			else
-				otg_dbg("client driver has been removed.\n");
-			langwell_otg_drv_vbus(0);
-			langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
-		} else if (langwell->hsm.b_bus_suspend) {
-			langwell_otg_del_timer(b_bus_suspend_tmr);
-			if (langwell->client_ops)
-				langwell->client_ops->suspend(langwell->pdev,
-					PMSG_FREEZE);
-			else
-				otg_dbg("client driver has been removed.\n");
-
-			if (langwell->host_ops)
-				langwell->host_ops->probe(langwell->pdev,
-						langwell->host_ops->id_table);
-			else
-				otg_dbg("host driver not loaded.\n");
-			langwell->hsm.a_set_b_hnp_en = 0;
-			langwell->hsm.a_wait_bcon_tmout = 0;
-			langwell_otg_add_timer(a_wait_bcon_tmr);
-			langwell->otg.state = OTG_STATE_A_WAIT_BCON;
-		} else if (langwell->hsm.b_bus_suspend_tmout) {
-			u32	val;
-			val = readl(langwell->regs + CI_PORTSC1);
-			if (!(val & PORTSC_SUSP))
-				break;
-			if (langwell->client_ops)
-				langwell->client_ops->suspend(langwell->pdev,
-						PMSG_FREEZE);
-			else
-				otg_dbg("client driver has been removed.\n");
-			if (langwell->host_ops)
-				langwell->host_ops->probe(langwell->pdev,
-						langwell->host_ops->id_table);
-			else
-				otg_dbg("host driver not loaded.\n");
-			langwell->hsm.a_set_b_hnp_en = 0;
-			langwell->hsm.a_wait_bcon_tmout = 0;
-			langwell_otg_add_timer(a_wait_bcon_tmr);
-			langwell->otg.state = OTG_STATE_A_WAIT_BCON;
-		}
-		break;
-	case OTG_STATE_A_VBUS_ERR:
-		if (langwell->hsm.id) {
-			langwell->otg.default_a = 0;
-			langwell->hsm.a_clr_err = 0;
-			langwell->hsm.a_srp_det = 0;
-			langwell->otg.state = OTG_STATE_B_IDLE;
-			queue_work(langwell->qwork, &langwell->work);
-		} else if (langwell->hsm.a_clr_err) {
-			langwell->hsm.a_clr_err = 0;
-			langwell->hsm.a_srp_det = 0;
-			reset_otg();
-			init_hsm();
-			if (langwell->otg.state == OTG_STATE_A_IDLE)
-				queue_work(langwell->qwork, &langwell->work);
-		}
-		break;
-	case OTG_STATE_A_WAIT_VFALL:
-		if (langwell->hsm.id) {
-			langwell->otg.default_a = 0;
-			langwell->otg.state = OTG_STATE_B_IDLE;
-			queue_work(langwell->qwork, &langwell->work);
-		} else if (langwell->hsm.a_bus_req) {
-			langwell_otg_drv_vbus(1);
-			langwell->hsm.a_wait_vrise_tmout = 0;
-			langwell_otg_add_timer(a_wait_vrise_tmr);
-			langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
-		} else if (!langwell->hsm.a_sess_vld) {
-			langwell->hsm.a_srp_det = 0;
-			langwell_otg_drv_vbus(0);
-			set_host_mode();
-			langwell->otg.state = OTG_STATE_A_IDLE;
-		}
-		break;
-	default:
-		;
-	}
-
-	otg_dbg("%s: new state = %s\n", __func__,
-			state_string(langwell->otg.state));
-}
-
-	static ssize_t
-show_registers(struct device *_dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg *langwell;
-	char *next;
-	unsigned size;
-	unsigned t;
-
-	langwell = the_transceiver;
-	next = buf;
-	size = PAGE_SIZE;
-
-	t = scnprintf(next, size,
-		"\n"
-		"USBCMD = 0x%08x \n"
-		"USBSTS = 0x%08x \n"
-		"USBINTR = 0x%08x \n"
-		"ASYNCLISTADDR = 0x%08x \n"
-		"PORTSC1 = 0x%08x \n"
-		"HOSTPC1 = 0x%08x \n"
-		"OTGSC = 0x%08x \n"
-		"USBMODE = 0x%08x \n",
-		readl(langwell->regs + 0x30),
-		readl(langwell->regs + 0x34),
-		readl(langwell->regs + 0x38),
-		readl(langwell->regs + 0x48),
-		readl(langwell->regs + 0x74),
-		readl(langwell->regs + 0xb4),
-		readl(langwell->regs + 0xf4),
-		readl(langwell->regs + 0xf8)
-		);
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
-
-static ssize_t
-show_hsm(struct device *_dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg *langwell;
-	char *next;
-	unsigned size;
-	unsigned t;
-
-	langwell = the_transceiver;
-	next = buf;
-	size = PAGE_SIZE;
-
-	t = scnprintf(next, size,
-		"\n"
-		"current state = %s\n"
-		"a_bus_resume = \t%d\n"
-		"a_bus_suspend = \t%d\n"
-		"a_conn = \t%d\n"
-		"a_sess_vld = \t%d\n"
-		"a_srp_det = \t%d\n"
-		"a_vbus_vld = \t%d\n"
-		"b_bus_resume = \t%d\n"
-		"b_bus_suspend = \t%d\n"
-		"b_conn = \t%d\n"
-		"b_se0_srp = \t%d\n"
-		"b_sess_end = \t%d\n"
-		"b_sess_vld = \t%d\n"
-		"id = \t%d\n"
-		"a_set_b_hnp_en = \t%d\n"
-		"b_srp_done = \t%d\n"
-		"b_hnp_enable = \t%d\n"
-		"a_wait_vrise_tmout = \t%d\n"
-		"a_wait_bcon_tmout = \t%d\n"
-		"a_aidl_bdis_tmout = \t%d\n"
-		"b_ase0_brst_tmout = \t%d\n"
-		"a_bus_drop = \t%d\n"
-		"a_bus_req = \t%d\n"
-		"a_clr_err = \t%d\n"
-		"a_suspend_req = \t%d\n"
-		"b_bus_req = \t%d\n"
-		"b_bus_suspend_tmout = \t%d\n"
-		"b_bus_suspend_vld = \t%d\n",
-		state_string(langwell->otg.state),
-		langwell->hsm.a_bus_resume,
-		langwell->hsm.a_bus_suspend,
-		langwell->hsm.a_conn,
-		langwell->hsm.a_sess_vld,
-		langwell->hsm.a_srp_det,
-		langwell->hsm.a_vbus_vld,
-		langwell->hsm.b_bus_resume,
-		langwell->hsm.b_bus_suspend,
-		langwell->hsm.b_conn,
-		langwell->hsm.b_se0_srp,
-		langwell->hsm.b_sess_end,
-		langwell->hsm.b_sess_vld,
-		langwell->hsm.id,
-		langwell->hsm.a_set_b_hnp_en,
-		langwell->hsm.b_srp_done,
-		langwell->hsm.b_hnp_enable,
-		langwell->hsm.a_wait_vrise_tmout,
-		langwell->hsm.a_wait_bcon_tmout,
-		langwell->hsm.a_aidl_bdis_tmout,
-		langwell->hsm.b_ase0_brst_tmout,
-		langwell->hsm.a_bus_drop,
-		langwell->hsm.a_bus_req,
-		langwell->hsm.a_clr_err,
-		langwell->hsm.a_suspend_req,
-		langwell->hsm.b_bus_req,
-		langwell->hsm.b_bus_suspend_tmout,
-		langwell->hsm.b_bus_suspend_vld
-		);
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL);
-
-static ssize_t
-get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg *langwell;
-	char *next;
-	unsigned size;
-	unsigned t;
-
-	langwell =  the_transceiver;
-	next = buf;
-	size = PAGE_SIZE;
-
-	t = scnprintf(next, size, "%d", langwell->hsm.a_bus_req);
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_req(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct langwell_otg *langwell;
-	langwell = the_transceiver;
-	if (!langwell->otg.default_a)
-		return -1;
-	if (count > 2)
-		return -1;
-
-	if (buf[0] == '0') {
-		langwell->hsm.a_bus_req = 0;
-		otg_dbg("a_bus_req = 0\n");
-	} else if (buf[0] == '1') {
-		/* If a_bus_drop is TRUE, a_bus_req can't be set */
-		if (langwell->hsm.a_bus_drop)
-			return -1;
-		langwell->hsm.a_bus_req = 1;
-		otg_dbg("a_bus_req = 1\n");
-	}
-	if (spin_trylock(&langwell->wq_lock)) {
-		queue_work(langwell->qwork, &langwell->work);
-		spin_unlock(&langwell->wq_lock);
-	}
-	return count;
-}
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
-
-static ssize_t
-get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg *langwell;
-	char *next;
-	unsigned size;
-	unsigned t;
-
-	langwell =  the_transceiver;
-	next = buf;
-	size = PAGE_SIZE;
-
-	t = scnprintf(next, size, "%d", langwell->hsm.a_bus_drop);
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_drop(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct langwell_otg *langwell;
-	langwell = the_transceiver;
-	if (!langwell->otg.default_a)
-		return -1;
-	if (count > 2)
-		return -1;
-
-	if (buf[0] == '0') {
-		langwell->hsm.a_bus_drop = 0;
-		otg_dbg("a_bus_drop = 0\n");
-	} else if (buf[0] == '1') {
-		langwell->hsm.a_bus_drop = 1;
-		langwell->hsm.a_bus_req = 0;
-		otg_dbg("a_bus_drop = 1, then a_bus_req = 0\n");
-	}
-	if (spin_trylock(&langwell->wq_lock)) {
-		queue_work(langwell->qwork, &langwell->work);
-		spin_unlock(&langwell->wq_lock);
-	}
-	return count;
-}
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
-	get_a_bus_drop, set_a_bus_drop);
-
-static ssize_t
-get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg *langwell;
-	char *next;
-	unsigned size;
-	unsigned t;
-
-	langwell =  the_transceiver;
-	next = buf;
-	size = PAGE_SIZE;
-
-	t = scnprintf(next, size, "%d", langwell->hsm.b_bus_req);
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_b_bus_req(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct langwell_otg *langwell;
-	langwell = the_transceiver;
-
-	if (langwell->otg.default_a)
-		return -1;
-
-	if (count > 2)
-		return -1;
-
-	if (buf[0] == '0') {
-		langwell->hsm.b_bus_req = 0;
-		otg_dbg("b_bus_req = 0\n");
-	} else if (buf[0] == '1') {
-		langwell->hsm.b_bus_req = 1;
-		otg_dbg("b_bus_req = 1\n");
-	}
-	if (spin_trylock(&langwell->wq_lock)) {
-		queue_work(langwell->qwork, &langwell->work);
-		spin_unlock(&langwell->wq_lock);
-	}
-	return count;
-}
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
-
-static ssize_t
-set_a_clr_err(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct langwell_otg *langwell;
-	langwell = the_transceiver;
-
-	if (!langwell->otg.default_a)
-		return -1;
-	if (count > 2)
-		return -1;
-
-	if (buf[0] == '1') {
-		langwell->hsm.a_clr_err = 1;
-		otg_dbg("a_clr_err = 1\n");
-	}
-	if (spin_trylock(&langwell->wq_lock)) {
-		queue_work(langwell->qwork, &langwell->work);
-		spin_unlock(&langwell->wq_lock);
-	}
-	return count;
-}
-static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
-
-static struct attribute *inputs_attrs[] = {
-	&dev_attr_a_bus_req.attr,
-	&dev_attr_a_bus_drop.attr,
-	&dev_attr_b_bus_req.attr,
-	&dev_attr_a_clr_err.attr,
-	NULL,
-};
-
-static struct attribute_group debug_dev_attr_group = {
-	.name = "inputs",
-	.attrs = inputs_attrs,
-};
-
-int langwell_register_host(struct pci_driver *host_driver)
-{
-	int	ret = 0;
-
-	the_transceiver->host_ops = host_driver;
-	queue_work(the_transceiver->qwork, &the_transceiver->work);
-	otg_dbg("host controller driver is registered\n");
-
-	return ret;
-}
-EXPORT_SYMBOL(langwell_register_host);
-
-void langwell_unregister_host(struct pci_driver *host_driver)
-{
-	if (the_transceiver->host_ops)
-		the_transceiver->host_ops->remove(the_transceiver->pdev);
-	the_transceiver->host_ops = NULL;
-	the_transceiver->hsm.a_bus_drop = 1;
-	queue_work(the_transceiver->qwork, &the_transceiver->work);
-	otg_dbg("host controller driver is unregistered\n");
-}
-EXPORT_SYMBOL(langwell_unregister_host);
-
-int langwell_register_peripheral(struct pci_driver *client_driver)
-{
-	int	ret = 0;
-
-	if (client_driver)
-		ret = client_driver->probe(the_transceiver->pdev,
-				client_driver->id_table);
-	if (!ret) {
-		the_transceiver->client_ops = client_driver;
-		queue_work(the_transceiver->qwork, &the_transceiver->work);
-		otg_dbg("client controller driver is registered\n");
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(langwell_register_peripheral);
-
-void langwell_unregister_peripheral(struct pci_driver *client_driver)
-{
-	if (the_transceiver->client_ops)
-		the_transceiver->client_ops->remove(the_transceiver->pdev);
-	the_transceiver->client_ops = NULL;
-	the_transceiver->hsm.b_bus_req = 0;
-	queue_work(the_transceiver->qwork, &the_transceiver->work);
-	otg_dbg("client controller driver is unregistered\n");
-}
-EXPORT_SYMBOL(langwell_unregister_peripheral);
-
-static int langwell_otg_probe(struct pci_dev *pdev,
-		const struct pci_device_id *id)
-{
-	unsigned long		resource, len;
-	void __iomem 		*base = NULL;
-	int			retval;
-	u32			val32;
-	struct langwell_otg	*langwell;
-	char			qname[] = "langwell_otg_queue";
-
-	retval = 0;
-	otg_dbg("\notg controller is detected.\n");
-	if (pci_enable_device(pdev) < 0) {
-		retval = -ENODEV;
-		goto done;
-	}
-
-	langwell = kzalloc(sizeof *langwell, GFP_KERNEL);
-	if (langwell == NULL) {
-		retval = -ENOMEM;
-		goto done;
-	}
-	the_transceiver = langwell;
-
-	/* control register: BAR 0 */
-	resource = pci_resource_start(pdev, 0);
-	len = pci_resource_len(pdev, 0);
-	if (!request_mem_region(resource, len, driver_name)) {
-		retval = -EBUSY;
-		goto err;
-	}
-	langwell->region = 1;
-
-	base = ioremap_nocache(resource, len);
-	if (base == NULL) {
-		retval = -EFAULT;
-		goto err;
-	}
-	langwell->regs = base;
-
-	if (!pdev->irq) {
-		otg_dbg("No IRQ.\n");
-		retval = -ENODEV;
-		goto err;
-	}
-
-	langwell->qwork = create_workqueue(qname);
-	if (!langwell->qwork) {
-		otg_dbg("cannot create workqueue %s\n", qname);
-		retval = -ENOMEM;
-		goto err;
-	}
-	INIT_WORK(&langwell->work, langwell_otg_work);
-
-	/* OTG common part */
-	langwell->pdev = pdev;
-	langwell->otg.dev = &pdev->dev;
-	langwell->otg.label = driver_name;
-	langwell->otg.set_host = langwell_otg_set_host;
-	langwell->otg.set_peripheral = langwell_otg_set_peripheral;
-	langwell->otg.set_power = langwell_otg_set_power;
-	langwell->otg.start_srp = langwell_otg_start_srp;
-	langwell->otg.state = OTG_STATE_UNDEFINED;
-	if (otg_set_transceiver(&langwell->otg)) {
-		otg_dbg("can't set transceiver\n");
-		retval = -EBUSY;
-		goto err;
-	}
-
-	reset_otg();
-	init_hsm();
-
-	spin_lock_init(&langwell->lock);
-	spin_lock_init(&langwell->wq_lock);
-	INIT_LIST_HEAD(&active_timers);
-	langwell_otg_init_timers(&langwell->hsm);
-
-	if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
-				driver_name, langwell) != 0) {
-		otg_dbg("request interrupt %d failed\n", pdev->irq);
-		retval = -EBUSY;
-		goto err;
-	}
-
-	/* enable OTGSC int */
-	val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE |
-		OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU;
-	writel(val32, langwell->regs + CI_OTGSC);
-
-	retval = device_create_file(&pdev->dev, &dev_attr_registers);
-	if (retval < 0) {
-		otg_dbg("Can't register sysfs attribute: %d\n", retval);
-		goto err;
-	}
-
-	retval = device_create_file(&pdev->dev, &dev_attr_hsm);
-	if (retval < 0) {
-		otg_dbg("Can't hsm sysfs attribute: %d\n", retval);
-		goto err;
-	}
-
-	retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group);
-	if (retval < 0) {
-		otg_dbg("Can't register sysfs attr group: %d\n", retval);
-		goto err;
-	}
-
-	if (langwell->otg.state == OTG_STATE_A_IDLE)
-		queue_work(langwell->qwork, &langwell->work);
-
-	return 0;
-
-err:
-	if (the_transceiver)
-		langwell_otg_remove(pdev);
-done:
-	return retval;
-}
-
-static void langwell_otg_remove(struct pci_dev *pdev)
-{
-	struct langwell_otg *langwell;
-
-	langwell = the_transceiver;
-
-	if (langwell->qwork) {
-		flush_workqueue(langwell->qwork);
-		destroy_workqueue(langwell->qwork);
-	}
-	langwell_otg_free_timers();
-
-	/* disable OTGSC interrupt as OTGSC doesn't change in reset */
-	writel(0, langwell->regs + CI_OTGSC);
-
-	if (pdev->irq)
-		free_irq(pdev->irq, langwell);
-	if (langwell->regs)
-		iounmap(langwell->regs);
-	if (langwell->region)
-		release_mem_region(pci_resource_start(pdev, 0),
-				pci_resource_len(pdev, 0));
-
-	otg_set_transceiver(NULL);
-	pci_disable_device(pdev);
-	sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group);
-	device_remove_file(&pdev->dev, &dev_attr_hsm);
-	device_remove_file(&pdev->dev, &dev_attr_registers);
-	kfree(langwell);
-	langwell = NULL;
-}
-
-static void transceiver_suspend(struct pci_dev *pdev)
-{
-	pci_save_state(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-	langwell_otg_phy_low_power(1);
-}
-
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message)
-{
-	int 	ret = 0;
-	struct langwell_otg *langwell;
-
-	langwell = the_transceiver;
-
-	/* Disbale OTG interrupts */
-	langwell_otg_intr(0);
-
-	if (pdev->irq)
-		free_irq(pdev->irq, langwell);
-
-	/* Prevent more otg_work */
-	flush_workqueue(langwell->qwork);
-	spin_lock(&langwell->wq_lock);
-
-	/* start actions */
-	switch (langwell->otg.state) {
-	case OTG_STATE_A_IDLE:
-	case OTG_STATE_B_IDLE:
-	case OTG_STATE_A_WAIT_VFALL:
-	case OTG_STATE_A_VBUS_ERR:
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_A_WAIT_VRISE:
-		langwell_otg_del_timer(a_wait_vrise_tmr);
-		langwell->hsm.a_srp_det = 0;
-		langwell_otg_drv_vbus(0);
-		langwell->otg.state = OTG_STATE_A_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_A_WAIT_BCON:
-		langwell_otg_del_timer(a_wait_bcon_tmr);
-		if (langwell->host_ops)
-			ret = langwell->host_ops->suspend(pdev, message);
-		langwell_otg_drv_vbus(0);
-		break;
-	case OTG_STATE_A_HOST:
-		if (langwell->host_ops)
-			ret = langwell->host_ops->suspend(pdev, message);
-		langwell_otg_drv_vbus(0);
-		langwell_otg_phy_low_power(1);
-		break;
-	case OTG_STATE_A_SUSPEND:
-		langwell_otg_del_timer(a_aidl_bdis_tmr);
-		langwell_otg_HABA(0);
-		if (langwell->host_ops)
-			langwell->host_ops->remove(pdev);
-		else
-			otg_dbg("host driver has been removed.\n");
-		langwell_otg_drv_vbus(0);
-		transceiver_suspend(pdev);
-		langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
-		break;
-	case OTG_STATE_A_PERIPHERAL:
-		if (langwell->client_ops)
-			ret = langwell->client_ops->suspend(pdev, message);
-		else
-			otg_dbg("client driver has been removed.\n");
-		langwell_otg_drv_vbus(0);
-		transceiver_suspend(pdev);
-		langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
-		break;
-	case OTG_STATE_B_HOST:
-		if (langwell->host_ops)
-			langwell->host_ops->remove(pdev);
-		else
-			otg_dbg("host driver has been removed.\n");
-		langwell->hsm.b_bus_req = 0;
-		transceiver_suspend(pdev);
-		langwell->otg.state = OTG_STATE_B_IDLE;
-		break;
-	case OTG_STATE_B_PERIPHERAL:
-		if (langwell->client_ops)
-			ret = langwell->client_ops->suspend(pdev, message);
-		else
-			otg_dbg("client driver has been removed.\n");
-		break;
-	case OTG_STATE_B_WAIT_ACON:
-		langwell_otg_del_timer(b_ase0_brst_tmr);
-		langwell_otg_HAAR(0);
-		if (langwell->host_ops)
-			langwell->host_ops->remove(pdev);
-		else
-			otg_dbg("host driver has been removed.\n");
-		langwell->hsm.b_bus_req = 0;
-		langwell->otg.state = OTG_STATE_B_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	default:
-		otg_dbg("error state before suspend\n ");
-		break;
-	}
-	spin_unlock(&langwell->wq_lock);
-
-	return ret;
-}
-
-static void transceiver_resume(struct pci_dev *pdev)
-{
-	pci_restore_state(pdev);
-	pci_set_power_state(pdev, PCI_D0);
-	langwell_otg_phy_low_power(0);
-}
-
-static int langwell_otg_resume(struct pci_dev *pdev)
-{
-	int 	ret = 0;
-	struct langwell_otg *langwell;
-
-	langwell = the_transceiver;
-
-	spin_lock(&langwell->wq_lock);
-
-	switch (langwell->otg.state) {
-	case OTG_STATE_A_IDLE:
-	case OTG_STATE_B_IDLE:
-	case OTG_STATE_A_WAIT_VFALL:
-	case OTG_STATE_A_VBUS_ERR:
-		transceiver_resume(pdev);
-		break;
-	case OTG_STATE_A_WAIT_BCON:
-		langwell_otg_add_timer(a_wait_bcon_tmr);
-		langwell_otg_drv_vbus(1);
-		if (langwell->host_ops)
-			ret = langwell->host_ops->resume(pdev);
-		break;
-	case OTG_STATE_A_HOST:
-		langwell_otg_drv_vbus(1);
-		langwell_otg_phy_low_power(0);
-		if (langwell->host_ops)
-			ret = langwell->host_ops->resume(pdev);
-		break;
-	case OTG_STATE_B_PERIPHERAL:
-		if (langwell->client_ops)
-			ret = langwell->client_ops->resume(pdev);
-		else
-			otg_dbg("client driver not loaded.\n");
-		break;
-	default:
-		otg_dbg("error state before suspend\n ");
-		break;
-	}
-
-	if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
-				driver_name, the_transceiver) != 0) {
-		otg_dbg("request interrupt %d failed\n", pdev->irq);
-		ret = -EBUSY;
-	}
-
-	/* enable OTG interrupts */
-	langwell_otg_intr(1);
-
-	spin_unlock(&langwell->wq_lock);
-
-	queue_work(langwell->qwork, &langwell->work);
-
-
-	return ret;
-}
-
-static int __init langwell_otg_init(void)
-{
-	return pci_register_driver(&otg_pci_driver);
-}
-module_init(langwell_otg_init);
-
-static void __exit langwell_otg_cleanup(void)
-{
-	pci_unregister_driver(&otg_pci_driver);
-}
-module_exit(langwell_otg_cleanup);
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index 9ed5ea56867..af456b48985 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -53,6 +53,7 @@ EXPORT_SYMBOL(usb_nop_xceiv_register);
 void usb_nop_xceiv_unregister(void)
 {
 	platform_device_unregister(pd);
+	pd = NULL;
 }
 EXPORT_SYMBOL(usb_nop_xceiv_unregister);
 
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 247b61bfb7f..0e4f2e41ace 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -169,9 +169,11 @@ static int usb_console_setup(struct console *co, char *options)
 			kfree(tty);
 		}
 	}
-	/* So we know not to kill the hardware on a hangup on this
-	   port. We have also bumped the use count by one so it won't go
-	   idle */
+	/* Now that any required fake tty operations are completed restore
+	 * the tty port count */
+	--port->port.count;
+	/* The console is special in terms of closing the device so
+	 * indicate this port is now acting as a system console. */
 	port->console = 1;
 	retval = 0;
 
@@ -204,7 +206,7 @@ static void usb_console_write(struct console *co,
 
 	dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 
-	if (!port->port.count) {
+	if (!port->console) {
 		dbg("%s - port not opened", __func__);
 		return;
 	}
@@ -300,8 +302,7 @@ void usb_serial_console_exit(void)
 {
 	if (usbcons_info.port) {
 		unregister_console(&usbcons);
-		if (usbcons_info.port->port.count)
-			usbcons_info.port->port.count--;
+		usbcons_info.port->console = 0;
 		usbcons_info.port = NULL;
 	}
 }
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 2b9eeda62bf..985cbcf48bd 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -67,6 +67,8 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
 	{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
 	{ USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
+	{ USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
+	{ USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
 	{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
 	{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
 	{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
@@ -78,6 +80,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
 	{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
 	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+	{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
@@ -94,7 +97,9 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
+	{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 9734085fd2f..59adfe12311 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1228,8 +1228,8 @@ static void cypress_read_int_callback(struct urb *urb)
 		/* precursor to disconnect so just go away */
 		return;
 	case -EPIPE:
-		usb_clear_halt(port->serial->dev, 0x81);
-		break;
+		/* Can't call usb_clear_halt while in_interrupt */
+		/* FALLS THROUGH */
 	default:
 		/* something ugly is going on... */
 		dev_err(&urb->dev->dev,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 3dc3768ca71..8fec5d4455c 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -33,6 +33,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
@@ -107,6 +108,7 @@ struct ftdi_sio_quirk {
 
 static int   ftdi_jtag_probe(struct usb_serial *serial);
 static int   ftdi_mtxorb_hack_setup(struct usb_serial *serial);
+static int   ftdi_NDI_device_setup(struct usb_serial *serial);
 static void  ftdi_USB_UIRT_setup(struct ftdi_private *priv);
 static void  ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
 
@@ -118,6 +120,10 @@ static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = {
 	.probe  = ftdi_mtxorb_hack_setup,
 };
 
+static struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
+	.probe	= ftdi_NDI_device_setup,
+};
+
 static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
 	.port_probe = ftdi_USB_UIRT_setup,
 };
@@ -191,6 +197,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
@@ -579,6 +586,9 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
 	{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
 	{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
 	{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
@@ -644,6 +654,16 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
 	{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
@@ -660,6 +680,8 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
@@ -667,7 +689,6 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
 	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
 	{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
-	{ USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) },
 	{ USB_DEVICE(ATMEL_VID, STK541_PID) },
 	{ USB_DEVICE(DE_VID, STB_PID) },
 	{ USB_DEVICE(DE_VID, WHT_PID) },
@@ -677,6 +698,10 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
+	{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
+	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -1023,6 +1048,16 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
 	case FT2232C: /* FT2232C chip */
 	case FT232RL:
 		if (baud <= 3000000) {
+			__u16 product_id = le16_to_cpu(
+				port->serial->dev->descriptor.idProduct);
+			if (((FTDI_NDI_HUC_PID == product_id) ||
+			     (FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
+			     (FTDI_NDI_FUTURE_2_PID == product_id) ||
+			     (FTDI_NDI_FUTURE_3_PID == product_id) ||
+			     (FTDI_NDI_AURORA_SCU_PID == product_id)) &&
+			    (baud == 19200)) {
+				baud = 1200000;
+			}
 			div_value = ftdi_232bm_baud_to_divisor(baud);
 		} else {
 			dbg("%s - Baud rate too high!", __func__);
@@ -1554,6 +1589,39 @@ static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
 } /* ftdi_HE_TIRA1_setup */
 
 /*
+ * Module parameter to control latency timer for NDI FTDI-based USB devices.
+ * If this value is not set in modprobe.conf.local its value will be set to 1ms.
+ */
+static int ndi_latency_timer = 1;
+
+/* Setup for the NDI FTDI-based USB devices, which requires hardwired
+ * baudrate (19200 gets mapped to 1200000).
+ *
+ * Called from usbserial:serial_probe.
+ */
+static int ftdi_NDI_device_setup(struct usb_serial *serial)
+{
+	struct usb_device *udev = serial->dev;
+	int latency = ndi_latency_timer;
+	int rv = 0;
+	char buf[1];
+
+	if (latency == 0)
+		latency = 1;
+	if (latency > 99)
+		latency = 99;
+
+	dbg("%s setting NDI device latency to %d", __func__, latency);
+	dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
+
+	rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+				FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+				latency, 0, buf, 0, WDR_TIMEOUT);
+	return 0;
+}
+
+/*
  * First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
  * Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
  * userspace using openocd.
@@ -2121,7 +2189,7 @@ static void ftdi_process_read(struct work_struct *work)
 				/* Note that the error flag is duplicated for
 				   every character received since we don't know
 				   which character it applied to */
-				if (!usb_serial_handle_sysrq_char(port,
+				if (!usb_serial_handle_sysrq_char(tty, port,
 						data[packet_offset + i]))
 					tty_insert_flip_char(tty,
 						data[packet_offset + i],
@@ -2622,3 +2690,5 @@ MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
 module_param(product, ushort, 0);
 MODULE_PARM_DESC(product, "User specified product ID");
 
+module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override");
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index f1d440a728a..8c92b88166a 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -506,6 +506,7 @@
  *
  * Armin Laeuger originally sent the PID for the UM 100 module.
  */
+#define FTDI_R2000KU_TRUE_RNG	0xFB80  /* R2000KU TRUE RNG */
 #define FTDI_ELV_UR100_PID	0xFB58	/* USB-RS232-Umsetzer (UR 100) */
 #define FTDI_ELV_UM100_PID	0xFB5A	/* USB-Modul UM 100 */
 #define FTDI_ELV_UO100_PID	0xFB5B	/* USB-Modul UO 100 */
@@ -614,6 +615,9 @@
 #define FTDI_CCSICDU20_0_PID    0xF9D0
 #define FTDI_CCSICDU40_1_PID    0xF9D1
 #define FTDI_CCSMACHX_2_PID     0xF9D2
+#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
+#define FTDI_CCSICDU64_4_PID    0xF9D4
+#define FTDI_CCSPRIME8_5_PID    0xF9D5
 
 /* Inside Accesso contactless reader (http://www.insidefr.com) */
 #define INSIDE_ACCESSO		0xFAD0
@@ -736,6 +740,15 @@
 #define FTDI_PYRAMID_PID	0xE6C8	/* Pyramid Appliance Display */
 
 /*
+ * NDI (www.ndigital.com) product ids
+ */
+#define FTDI_NDI_HUC_PID		0xDA70	/* NDI Host USB Converter */
+#define FTDI_NDI_SPECTRA_SCU_PID	0xDA71	/* NDI Spectra SCU */
+#define FTDI_NDI_FUTURE_2_PID		0xDA72	/* NDI future device #2 */
+#define FTDI_NDI_FUTURE_3_PID		0xDA73	/* NDI future device #3 */
+#define FTDI_NDI_AURORA_SCU_PID		0xDA74	/* NDI Aurora SCU */
+
+/*
  * Posiflex inc retail equipment (http://www.posiflex.com.tw)
  */
 #define POSIFLEX_VID		0x0d3a  /* Vendor ID */
@@ -848,9 +861,6 @@
 #define TML_VID			0x1B91	/* Vendor ID */
 #define TML_USB_SERIAL_PID	0x0064	/* USB - Serial Converter */
 
-/* NDI Polaris System */
-#define FTDI_NDI_HUC_PID        0xDA70
-
 /* Propox devices */
 #define FTDI_PROPOX_JTAGCABLEII_PID	0xD738
 
@@ -934,6 +944,29 @@
 #define MARVELL_VID		0x9e88
 #define MARVELL_SHEEVAPLUG_PID	0x9e8f
 
+#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+
+/*
+ * GN Otometrics (http://www.otometrics.com)
+ * Submitted by Ville Sundberg.
+ */
+#define GN_OTOMETRICS_VID	0x0c33	/* Vendor ID */
+#define AURICAL_USB_PID		0x0010	/* Aurical USB Audiometer */
+
+/*
+ * Bayer Ascensia Contour blood glucose meter USB-converter cable.
+ * http://winglucofacts.com/cables/
+ */
+#define BAYER_VID                      0x1A79
+#define BAYER_CONTOUR_CABLE_PID        0x6001
+
+/*
+ * Marvell OpenRD Base, Client
+ * http://www.open-rd.org
+ * OpenRD Base, Client use VID 0x0403
+ */
+#define MARVELL_OPENRD_PID	0x9e90
+
 /*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 932d6241b78..ce57f6a32bd 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -424,10 +424,17 @@ static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
 	if (!tty)
 		goto done;
 
-	/* Push data to tty */
-	for (i = 0; i < urb->actual_length; i++, ch++) {
-		if (!usb_serial_handle_sysrq_char(port, *ch))
-			tty_insert_flip_char(tty, *ch, TTY_NORMAL);
+	/* The per character mucking around with sysrq path it too slow for
+	   stuff like 3G modems, so shortcircuit it in the 99.9999999% of cases
+	   where the USB serial is not a console anyway */
+	if (!port->console || !port->sysrq)
+		tty_insert_flip_string(tty, ch, urb->actual_length);
+	else {
+		/* Push data to tty */
+		for (i = 0; i < urb->actual_length; i++, ch++) {
+			if (!usb_serial_handle_sysrq_char(tty, port, *ch))
+				tty_insert_flip_char(tty, *ch, TTY_NORMAL);
+		}
 	}
 	tty_flip_buffer_push(tty);
 	tty_kref_put(tty);
@@ -527,11 +534,12 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty)
 	}
 }
 
-int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch)
+int usb_serial_handle_sysrq_char(struct tty_struct *tty,
+			struct usb_serial_port *port, unsigned int ch)
 {
 	if (port->sysrq && port->console) {
 		if (ch && time_before(jiffies, port->sysrq)) {
-			handle_sysrq(ch, tty_port_tty_get(&port->port));
+			handle_sysrq(ch, tty);
 			port->sysrq = 0;
 			return 1;
 		}
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index bfc5ce000ef..ccd4dd340d2 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -521,7 +521,7 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty)
 	mos7720_port = usb_get_serial_port_data(port);
 	if (mos7720_port == NULL) {
 		dbg("%s:leaving ...........", __func__);
-		return -ENODEV;
+		return 0;
 	}
 
 	for (i = 0; i < NUM_URBS; ++i) {
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index c40f95c1951..270009afdf7 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -26,6 +26,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
@@ -123,10 +124,13 @@
 #define BANDB_DEVICE_ID_USOPTL4_4       0xAC44
 #define BANDB_DEVICE_ID_USOPTL4_2       0xAC42
 
-/* This driver also supports the ATEN UC2324 device since it is mos7840 based
- *  - if I knew the device id it would also support the ATEN UC2322 */
+/* This driver also supports
+ * ATEN UC2324 device using Moschip MCS7840
+ * ATEN UC2322 device using Moschip MCS7820
+ */
 #define USB_VENDOR_ID_ATENINTL		0x0557
 #define ATENINTL_DEVICE_ID_UC2324	0x2011
+#define ATENINTL_DEVICE_ID_UC2322	0x7820
 
 /* Interrupt Routine Defines    */
 
@@ -176,6 +180,7 @@ static struct usb_device_id moschip_port_id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
+	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */
 };
 
@@ -185,6 +190,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
+	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */
 };
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 575816e6ba3..c784ddbe7b6 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -66,8 +66,10 @@ static int  option_tiocmget(struct tty_struct *tty, struct file *file);
 static int  option_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear);
 static int  option_send_setup(struct usb_serial_port *port);
+#ifdef CONFIG_PM
 static int  option_suspend(struct usb_serial *serial, pm_message_t message);
 static int  option_resume(struct usb_serial *serial);
+#endif
 
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID			0x0AF0
@@ -205,7 +207,9 @@ static int  option_resume(struct usb_serial *serial);
 #define NOVATELWIRELESS_PRODUCT_MC727		0x4100
 #define NOVATELWIRELESS_PRODUCT_MC950D		0x4400
 #define NOVATELWIRELESS_PRODUCT_U727		0x5010
+#define NOVATELWIRELESS_PRODUCT_MC727_NEW	0x5100
 #define NOVATELWIRELESS_PRODUCT_MC760		0x6000
+#define NOVATELWIRELESS_PRODUCT_OVMC760		0x6002
 
 /* FUTURE NOVATEL PRODUCTS */
 #define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED	0X6001
@@ -258,11 +262,6 @@ static int  option_resume(struct usb_serial *serial);
 #define AXESSTEL_VENDOR_ID			0x1726
 #define AXESSTEL_PRODUCT_MV110H			0x1000
 
-#define ONDA_VENDOR_ID				0x19d2
-#define ONDA_PRODUCT_MSA501HS			0x0001
-#define ONDA_PRODUCT_ET502HS			0x0002
-#define ONDA_PRODUCT_MT503HS			0x2000
-
 #define BANDRICH_VENDOR_ID			0x1A8D
 #define BANDRICH_PRODUCT_C100_1			0x1002
 #define BANDRICH_PRODUCT_C100_2			0x1003
@@ -300,6 +299,7 @@ static int  option_resume(struct usb_serial *serial);
 #define ZTE_PRODUCT_MF628			0x0015
 #define ZTE_PRODUCT_MF626			0x0031
 #define ZTE_PRODUCT_CDMA_TECH			0xfffe
+#define ZTE_PRODUCT_AC8710			0xfff1
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -307,11 +307,25 @@ static int  option_resume(struct usb_serial *serial);
 #define DLINK_VENDOR_ID				0x1186
 #define DLINK_PRODUCT_DWM_652			0x3e04
 
+#define QISDA_VENDOR_ID				0x1da5
+#define QISDA_PRODUCT_H21_4512			0x4512
+#define QISDA_PRODUCT_H21_4523			0x4523
+#define QISDA_PRODUCT_H20_4515			0x4515
+#define QISDA_PRODUCT_H20_4519			0x4519
+
 
 /* TOSHIBA PRODUCTS */
 #define TOSHIBA_VENDOR_ID			0x0930
 #define TOSHIBA_PRODUCT_HSDPA_MINICARD		0x1302
 
+#define ALINK_VENDOR_ID				0x1e0e
+#define ALINK_PRODUCT_3GU			0x9200
+
+/* ALCATEL PRODUCTS */
+#define ALCATEL_VENDOR_ID			0x1bbb
+#define ALCATEL_PRODUCT_X060S			0x0000
+
+
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -428,8 +442,10 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727_NEW) }, /* Novatel MC727/U727/USB727 refresh */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) }, /* Novatel Ovation MC760 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */
@@ -463,42 +479,6 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
 	{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0003) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0004) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0005) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0006) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0007) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0008) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0009) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000a) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000b) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000c) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000d) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000e) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000f) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0010) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0011) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0012) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0013) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0014) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0015) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0016) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0017) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0018) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0019) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0020) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0021) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0022) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0023) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0024) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0025) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0026) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0027) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0028) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0029) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) },
 	{ USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
@@ -523,14 +503,85 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
-	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622) },
-	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
-	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
-	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0006, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0007, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0008, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0009, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000a, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000b, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000c, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000d, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000e, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000f, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0082, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
-	{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
+	{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -539,8 +590,10 @@ static struct usb_driver option_driver = {
 	.name       = "option",
 	.probe      = usb_serial_probe,
 	.disconnect = usb_serial_disconnect,
+#ifdef CONFIG_PM
 	.suspend    = usb_serial_suspend,
 	.resume     = usb_serial_resume,
+#endif
 	.id_table   = option_ids,
 	.no_dynamic_id = 	1,
 };
@@ -572,8 +625,10 @@ static struct usb_serial_driver option_1port_device = {
 	.disconnect        = option_disconnect,
 	.release           = option_release,
 	.read_int_callback = option_instat_callback,
+#ifdef CONFIG_PM
 	.suspend           = option_suspend,
 	.resume            = option_resume,
+#endif
 };
 
 static int debug;
@@ -732,7 +787,6 @@ static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
 		memcpy(this_urb->transfer_buffer, buf, todo);
 		this_urb->transfer_buffer_length = todo;
 
-		this_urb->dev = port->serial->dev;
 		err = usb_submit_urb(this_urb, GFP_ATOMIC);
 		if (err) {
 			dbg("usb_submit_urb %p (write bulk) failed "
@@ -816,7 +870,6 @@ static void option_instat_callback(struct urb *urb)
 	int status = urb->status;
 	struct usb_serial_port *port =  urb->context;
 	struct option_port_private *portdata = usb_get_serial_port_data(port);
-	struct usb_serial *serial = port->serial;
 
 	dbg("%s", __func__);
 	dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
@@ -860,7 +913,6 @@ static void option_instat_callback(struct urb *urb)
 
 	/* Resubmit urb so we continue receiving IRQ data */
 	if (status != -ESHUTDOWN && status != -ENOENT) {
-		urb->dev = serial->dev;
 		err = usb_submit_urb(urb, GFP_ATOMIC);
 		if (err)
 			dbg("%s: resubmit intr urb failed. (%d)",
@@ -913,7 +965,6 @@ static int option_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
 {
 	struct option_port_private *portdata;
-	struct usb_serial *serial = port->serial;
 	int i, err;
 	struct urb *urb;
 
@@ -921,23 +972,11 @@ static int option_open(struct tty_struct *tty,
 
 	dbg("%s", __func__);
 
-	/* Reset low level data toggle and start reading from endpoints */
+	/* Start reading from the IN endpoint */
 	for (i = 0; i < N_IN_URB; i++) {
 		urb = portdata->in_urbs[i];
 		if (!urb)
 			continue;
-		if (urb->dev != serial->dev) {
-			dbg("%s: dev %p != %p", __func__,
-				urb->dev, serial->dev);
-			continue;
-		}
-
-		/*
-		 * make sure endpoint data toggle is synchronized with the
-		 * device
-		 */
-		usb_clear_halt(urb->dev, urb->pipe);
-
 		err = usb_submit_urb(urb, GFP_KERNEL);
 		if (err) {
 			dbg("%s: submit urb %d failed (%d) %d",
@@ -946,16 +985,6 @@ static int option_open(struct tty_struct *tty,
 		}
 	}
 
-	/* Reset low level data toggle on out endpoints */
-	for (i = 0; i < N_OUT_URB; i++) {
-		urb = portdata->out_urbs[i];
-		if (!urb)
-			continue;
-		urb->dev = serial->dev;
-		/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
-				usb_pipeout(urb->pipe), 0); */
-	}
-
 	option_send_setup(port);
 
 	return 0;
@@ -1195,6 +1224,7 @@ static void option_release(struct usb_serial *serial)
 	}
 }
 
+#ifdef CONFIG_PM
 static int option_suspend(struct usb_serial *serial, pm_message_t message)
 {
 	dbg("%s entered", __func__);
@@ -1218,7 +1248,6 @@ static int option_resume(struct usb_serial *serial)
 			dbg("%s: No interrupt URB for port %d\n", __func__, i);
 			continue;
 		}
-		port->interrupt_in_urb->dev = serial->dev;
 		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
 		dbg("Submitted interrupt URB for port %d (result %d)", i, err);
 		if (err < 0) {
@@ -1254,6 +1283,7 @@ static int option_resume(struct usb_serial *serial)
 	}
 	return 0;
 }
+#endif
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ec6c132a25b..3e86815b270 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -94,6 +94,8 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
 	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
@@ -971,18 +973,46 @@ exit:
 			__func__, retval);
 }
 
+static void pl2303_push_data(struct tty_struct *tty,
+		struct usb_serial_port *port, struct urb *urb,
+		u8 line_status)
+{
+	unsigned char *data = urb->transfer_buffer;
+	/* get tty_flag from status */
+	char tty_flag = TTY_NORMAL;
+	/* break takes precedence over parity, */
+	/* which takes precedence over framing errors */
+	if (line_status & UART_BREAK_ERROR)
+		tty_flag = TTY_BREAK;
+	else if (line_status & UART_PARITY_ERROR)
+		tty_flag = TTY_PARITY;
+	else if (line_status & UART_FRAME_ERROR)
+		tty_flag = TTY_FRAME;
+	dbg("%s - tty_flag = %d", __func__, tty_flag);
+
+	tty_buffer_request_room(tty, urb->actual_length + 1);
+	/* overrun is special, not associated with a char */
+	if (line_status & UART_OVERRUN_ERROR)
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+	if (port->console && port->sysrq) {
+		int i;
+		for (i = 0; i < urb->actual_length; ++i)
+			if (!usb_serial_handle_sysrq_char(tty, port, data[i]))
+				tty_insert_flip_char(tty, data[i], tty_flag);
+	} else
+		tty_insert_flip_string(tty, data, urb->actual_length);
+	tty_flip_buffer_push(tty);
+}
+
 static void pl2303_read_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port =  urb->context;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	struct tty_struct *tty;
-	unsigned char *data = urb->transfer_buffer;
 	unsigned long flags;
-	int i;
 	int result;
 	int status = urb->status;
 	u8 line_status;
-	char tty_flag;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -1010,10 +1040,7 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 	}
 
 	usb_serial_debug_data(debug, &port->dev, __func__,
-			      urb->actual_length, data);
-
-	/* get tty_flag from status */
-	tty_flag = TTY_NORMAL;
+			      urb->actual_length, urb->transfer_buffer);
 
 	spin_lock_irqsave(&priv->lock, flags);
 	line_status = priv->line_status;
@@ -1021,26 +1048,9 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 	spin_unlock_irqrestore(&priv->lock, flags);
 	wake_up_interruptible(&priv->delta_msr_wait);
 
-	/* break takes precedence over parity, */
-	/* which takes precedence over framing errors */
-	if (line_status & UART_BREAK_ERROR)
-		tty_flag = TTY_BREAK;
-	else if (line_status & UART_PARITY_ERROR)
-		tty_flag = TTY_PARITY;
-	else if (line_status & UART_FRAME_ERROR)
-		tty_flag = TTY_FRAME;
-	dbg("%s - tty_flag = %d", __func__, tty_flag);
-
 	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length + 1);
-		/* overrun is special, not associated with a char */
-		if (line_status & UART_OVERRUN_ERROR)
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		for (i = 0; i < urb->actual_length; ++i)
-			if (!usb_serial_handle_sysrq_char(port, data[i]))
-				tty_insert_flip_char(tty, data[i], tty_flag);
-		tty_flip_buffer_push(tty);
+		pl2303_push_data(tty, port, urb, line_status);
 	}
 	tty_kref_put(tty);
 	/* Schedule the next read _if_ we are still open */
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 1d7a22e3a9f..ee9505e1dd9 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -122,3 +122,11 @@
 /* Hewlett-Packard LD220-HP POS Pole Display */
 #define HP_VENDOR_ID		0x03f0
 #define HP_LD220_PRODUCT_ID	0x3524
+
+/* Cressi Edy (diving computer) PC interface */
+#define CRESSI_VENDOR_ID	0x04b8
+#define CRESSI_EDY_PRODUCT_ID	0x0521
+
+/* Sony, USB data cable for CMD-Jxx mobile phones */
+#define SONY_VENDOR_ID		0x054c
+#define SONY_QN3USB_PRODUCT_ID	0x0437
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 032f7aeb40a..f48d05e0acc 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -181,35 +181,50 @@ static const struct sierra_iface_info direct_ip_interface_blacklist = {
 };
 
 static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
+	{ USB_DEVICE(0x03F0, 0x1B1D) },	/* HP ev2200 a.k.a MC5720 */
+	{ USB_DEVICE(0x03F0, 0x1E1D) },	/* HP hs2300 a.k.a MC8775 */
+
 	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
 	{ USB_DEVICE(0x1199, 0x0018) },	/* Sierra Wireless MC5720 */
 	{ USB_DEVICE(0x1199, 0x0218) },	/* Sierra Wireless MC5720 */
-	{ USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */
 	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
-	{ USB_DEVICE(0x1199, 0x0024) },	/* Sierra Wireless MC5727 */
 	{ USB_DEVICE(0x1199, 0x0220) },	/* Sierra Wireless MC5725 */
+	{ USB_DEVICE(0x1199, 0x0022) },	/* Sierra Wireless EM5725 */
+	{ USB_DEVICE(0x1199, 0x0024) },	/* Sierra Wireless MC5727 */
+	{ USB_DEVICE(0x1199, 0x0224) },	/* Sierra Wireless MC5727 */
 	{ USB_DEVICE(0x1199, 0x0019) },	/* Sierra Wireless AirCard 595 */
 	{ USB_DEVICE(0x1199, 0x0021) },	/* Sierra Wireless AirCard 597E */
+	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
 	{ USB_DEVICE(0x1199, 0x0120) },	/* Sierra Wireless USB Dongle 595U */
-	 /* Sierra Wireless C597 */
+	/* Sierra Wireless C597 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
-	 /* Sierra Wireless Device */
+	/* Sierra Wireless T598 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
-	{ USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
-	{ USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */
-	{ USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */
+	{ USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless T11 */
+	{ USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless AC402 */
+	{ USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless MC5728 */
+	{ USB_DEVICE(0x1199, 0x0029) }, /* Sierra Wireless Device */
 
 	{ USB_DEVICE(0x1199, 0x6802) },	/* Sierra Wireless MC8755 */
-	{ USB_DEVICE(0x1199, 0x6804) },	/* Sierra Wireless MC8755 */
 	{ USB_DEVICE(0x1199, 0x6803) },	/* Sierra Wireless MC8765 */
+	{ USB_DEVICE(0x1199, 0x6804) },	/* Sierra Wireless MC8755 */
+	{ USB_DEVICE(0x1199, 0x6805) },	/* Sierra Wireless MC8765 */
+	{ USB_DEVICE(0x1199, 0x6808) },	/* Sierra Wireless MC8755 */
+	{ USB_DEVICE(0x1199, 0x6809) },	/* Sierra Wireless MC8765 */
 	{ USB_DEVICE(0x1199, 0x6812) },	/* Sierra Wireless MC8775 & AC 875U */
-	{ USB_DEVICE(0x1199, 0x6813) },	/* Sierra Wireless MC8775 (Lenovo) */
+	{ USB_DEVICE(0x1199, 0x6813) },	/* Sierra Wireless MC8775 */
 	{ USB_DEVICE(0x1199, 0x6815) },	/* Sierra Wireless MC8775 */
-	{ USB_DEVICE(0x03f0, 0x1e1d) },	/* HP hs2300 a.k.a MC8775 */
+	{ USB_DEVICE(0x1199, 0x6816) },	/* Sierra Wireless MC8775 */
 	{ USB_DEVICE(0x1199, 0x6820) },	/* Sierra Wireless AirCard 875 */
 	{ USB_DEVICE(0x1199, 0x6821) },	/* Sierra Wireless AirCard 875U */
+	{ USB_DEVICE(0x1199, 0x6822) },	/* Sierra Wireless AirCard 875E */
 	{ USB_DEVICE(0x1199, 0x6832) },	/* Sierra Wireless MC8780 */
 	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781 */
+	{ USB_DEVICE(0x1199, 0x6834) },	/* Sierra Wireless MC8780 */
+	{ USB_DEVICE(0x1199, 0x6835) },	/* Sierra Wireless MC8781 */
+	{ USB_DEVICE(0x1199, 0x6838) },	/* Sierra Wireless MC8780 */
+	{ USB_DEVICE(0x1199, 0x6839) },	/* Sierra Wireless MC8781 */
 	{ USB_DEVICE(0x1199, 0x683A) },	/* Sierra Wireless MC8785 */
 	{ USB_DEVICE(0x1199, 0x683B) },	/* Sierra Wireless MC8785 Composite */
 	/* Sierra Wireless MC8790, MC8791, MC8792 Composite */
@@ -227,16 +242,13 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x685A) },	/* Sierra Wireless AirCard 885 E */
 	/* Sierra Wireless C885 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
-	/* Sierra Wireless Device */
+	/* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
-	/* Sierra Wireless Device */
+	/* Sierra Wireless C22/C33 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)},
-	/* Sierra Wireless Device */
+	/* Sierra Wireless HSPA Non-Composite Device */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
-
-	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
-	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
-
+	{ USB_DEVICE(0x1199, 0x6893) },	/* Sierra Wireless Device */
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
@@ -814,7 +826,7 @@ static int sierra_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static void sierra_disconnect(struct usb_serial *serial)
+static void sierra_release(struct usb_serial *serial)
 {
 	int i;
 	struct usb_serial_port *port;
@@ -830,7 +842,6 @@ static void sierra_disconnect(struct usb_serial *serial)
 		if (!portdata)
 			continue;
 		kfree(portdata);
-		usb_set_serial_port_data(port, NULL);
 	}
 }
 
@@ -853,7 +864,7 @@ static struct usb_serial_driver sierra_device = {
 	.tiocmget          = sierra_tiocmget,
 	.tiocmset          = sierra_tiocmset,
 	.attach            = sierra_startup,
-	.disconnect        = sierra_disconnect,
+	.release           = sierra_release,
 	.read_int_callback = sierra_instat_callback,
 };
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 991d8232e37..3bc609fe224 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -191,7 +191,6 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
-	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = {
@@ -728,7 +727,7 @@ static int ti_write_room(struct tty_struct *tty)
 	dbg("%s - port %d", __func__, port->number);
 
 	if (tport == NULL)
-		return -ENODEV;
+		return 0;
 
 	spin_lock_irqsave(&tport->tp_lock, flags);
 	room = ti_buf_space_avail(tport->tp_write_buf);
@@ -749,7 +748,7 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
 	dbg("%s - port %d", __func__, port->number);
 
 	if (tport == NULL)
-		return -ENODEV;
+		return 0;
 
 	spin_lock_irqsave(&tport->tp_lock, flags);
 	chars = ti_buf_data_avail(tport->tp_write_buf);
@@ -1658,7 +1657,7 @@ static int ti_do_download(struct usb_device *dev, int pipe,
 	u8 cs = 0;
 	int done;
 	struct ti_firmware_header *header;
-	int status;
+	int status = 0;
 	int len;
 
 	for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index d595aa5586a..99188c92068 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -21,6 +21,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
@@ -31,6 +32,7 @@
 #include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/uaccess.h>
+#include <linux/serial.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include "pl2303.h"
@@ -183,6 +185,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 	struct usb_serial_port *port;
 	unsigned int portNumber;
 	int retval = 0;
+	int first = 0;
 
 	dbg("%s", __func__);
 
@@ -220,8 +223,9 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 	tty->driver_data = port;
 	tty_port_tty_set(&port->port, tty);
 
-	if (port->port.count == 1) {
-
+	/* If the console is attached, the device is already open */
+	if (port->port.count == 1 && !port->console) {
+		first = 1;
 		/* lock this module before we call it
 		 * this may fail, which means we must bail out,
 		 * safe because we are called with BKL held */
@@ -244,13 +248,21 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 		if (retval)
 			goto bailout_interface_put;
 		mutex_unlock(&serial->disc_mutex);
+		set_bit(ASYNCB_INITIALIZED, &port->port.flags);
 	}
 	mutex_unlock(&port->mutex);
 	/* Now do the correct tty layer semantics */
 	retval = tty_port_block_til_ready(&port->port, tty, filp);
-	if (retval == 0)
+	if (retval == 0) {
+		if (!first)
+			usb_serial_put(serial);
 		return 0;
-
+	}
+	mutex_lock(&port->mutex);
+	if (first == 0)
+		goto bailout_mutex_unlock;
+	/* Undo the initial port actions */
+	mutex_lock(&serial->disc_mutex);
 bailout_interface_put:
 	usb_autopm_put_interface(serial->interface);
 bailout_module_put:
@@ -333,8 +345,27 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
+	if (!port)
+		return;
+
 	dbg("%s - port %d", __func__, port->number);
 
+	/* FIXME:
+	   This leaves a very narrow race. Really we should do the
+	   serial_do_free() on tty->shutdown(), but tty->shutdown can
+	   be called from IRQ context and serial_do_free can sleep.
+
+	   The right fix is probably to make the tty free (which is rare)
+	   and thus tty->shutdown() occur via a work queue and simplify all
+	   the drivers that use it.
+	*/
+	if (tty_hung_up_p(filp)) {
+		/* serial_hangup already called serial_down at this point.
+		   Another user may have already reopened the port but
+		   serial_do_free is refcounted */
+		serial_do_free(port);
+		return;
+	}
 
 	if (tty_port_close_start(&port->port, tty, filp) == 0)
 		return;
@@ -350,7 +381,8 @@ static void serial_hangup(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	serial_do_down(port);
 	tty_port_hangup(&port->port);
-	serial_do_free(port);
+	/* We must not free port yet - the USB serial layer depends on it's
+	   continued existence */
 }
 
 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -389,7 +421,6 @@ static int serial_chars_in_buffer(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s = port %d", __func__, port->number);
 
-	WARN_ON(!port->port.count);
 	/* if the device was unplugged then any remaining characters
 	   fell out of the connector ;) */
 	if (port->serial->disconnected)
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
index d41cc0a970f..773a5cd38c5 100644
--- a/drivers/usb/storage/option_ms.c
+++ b/drivers/usb/storage/option_ms.c
@@ -118,6 +118,9 @@ static int option_inquiry(struct us_data *us)
 
 	result = memcmp(buffer+8, "Option", 6);
 
+	if (result != 0)
+		result = memcmp(buffer+8, "ZCOPTION", 8);
+
 	/* Read the CSW */
 	usb_stor_bulk_transfer_buf(us,
 			us->recv_bulk_pipe,
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index fcb32021721..e20dc525d17 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -961,7 +961,7 @@ int usb_stor_Bulk_max_lun(struct us_data *us)
 				 US_BULK_GET_MAX_LUN, 
 				 USB_DIR_IN | USB_TYPE_CLASS | 
 				 USB_RECIP_INTERFACE,
-				 0, us->ifnum, us->iobuf, 1, HZ);
+				 0, us->ifnum, us->iobuf, 1, 10*HZ);
 
 	US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", 
 		  result, us->iobuf[0]);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1b9c5dd0fb2..7477d411959 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -838,6 +838,13 @@ UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Rogerio Brito <rbrito@ime.usp.br> */
+UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
+		"Prolific Technology, Inc.",
+		"Mass Storage Device",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_NOT_LOCKABLE ),
+
 /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
 /* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
  * Thomas Bartosik <tbartdev@gmx-topmail.de> */
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d6d65ef85f5..3b54b394017 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -616,6 +616,8 @@ config FB_STI
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select STI_CONSOLE
+	select VT
 	default y
 	---help---
 	  STI refers to the HP "Standard Text Interface" which is a set of
@@ -1117,12 +1119,13 @@ config FB_CARILLO_RANCH
 
 config FB_INTEL
 	tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL
+	depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EMBEDDED
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
+	depends on !DRM_I915
 	help
 	  This driver supports the on-board graphics built in to the Intel
           830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index fb8163d181a..a21efcd10b7 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -226,9 +226,10 @@ static int clcdfb_set_par(struct fb_info *info)
 	clcdfb_enable(fb, regs.cntl);
 
 #ifdef DEBUG
-	printk(KERN_INFO "CLCD: Registers set to\n"
-	       KERN_INFO "  %08x %08x %08x %08x\n"
-	       KERN_INFO "  %08x %08x %08x %08x\n",
+	printk(KERN_INFO
+	       "CLCD: Registers set to\n"
+	       "  %08x %08x %08x %08x\n"
+	       "  %08x %08x %08x %08x\n",
 		readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
 		readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
 		readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 018850c116c..8cd279be74e 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -2405,6 +2405,9 @@ static int do_fb_set_var(struct fb_var_screeninfo *var, int isactive)
 	return 0;
 }
 
+/* fbhw->encode_fix() must be called with fb_info->mm_lock held
+ * if it is called after the register_framebuffer() - not a case here
+ */
 static int atafb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info)
 {
 	struct atafb_par par;
@@ -2414,7 +2417,8 @@ static int atafb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info)
 	if (err)
 		return err;
 	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
-	return fbhw->encode_fix(fix, &par);
+	err = fbhw->encode_fix(fix, &par);
+	return err;
 }
 
 static int atafb_get_var(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -2743,7 +2747,9 @@ static int atafb_set_par(struct fb_info *info)
 
 	/* Decode wanted screen parameters */
 	fbhw->decode_var(&info->var, par);
+	mutex_lock(&info->mm_lock);
 	fbhw->encode_fix(&info->fix, par);
+	mutex_unlock(&info->mm_lock);
 
 	/* Set new videomode */
 	ata_set_par(par);
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 5afd64482f5..da05f0801bb 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -261,6 +261,9 @@ static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
 /**
  *	atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
  *	@sinfo: the frame buffer to allocate memory for
+ * 	
+ * 	This function is called only from the atmel_lcdfb_probe()
+ * 	so no locking by fb_info->mm_lock around smem_len setting is needed.
  */
 static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
 {
diff --git a/drivers/video/aty/atyfb.h b/drivers/video/aty/atyfb.h
index 7691e73823d..1f39a62f899 100644
--- a/drivers/video/aty/atyfb.h
+++ b/drivers/video/aty/atyfb.h
@@ -187,6 +187,8 @@ struct atyfb_par {
 	int mtrr_reg;
 #endif
 	u32 mem_cntl;
+	struct crtc saved_crtc;
+	union aty_pll saved_pll;
 };
 
     /*
@@ -217,6 +219,7 @@ struct atyfb_par {
 #define M64F_XL_DLL		0x00080000
 #define M64F_MFB_FORCE_4	0x00100000
 #define M64F_HW_TRIPLE		0x00200000
+#define M64F_XL_MEM		0x00400000
     /*
      *  Register access
      */
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 1207c208a30..63d3739d43a 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -66,6 +66,8 @@
 #include <linux/spinlock.h>
 #include <linux/wait.h>
 #include <linux/backlight.h>
+#include <linux/reboot.h>
+#include <linux/dmi.h>
 
 #include <asm/io.h>
 #include <linux/uaccess.h>
@@ -249,8 +251,6 @@ static int aty_init(struct fb_info *info);
 static int store_video_par(char *videopar, unsigned char m64_num);
 #endif
 
-static struct crtc saved_crtc;
-static union aty_pll saved_pll;
 static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc);
 
 static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc);
@@ -261,6 +261,8 @@ static void set_off_pitch(struct atyfb_par *par, const struct fb_info *info);
 static int read_aty_sense(const struct atyfb_par *par);
 #endif
 
+static DEFINE_MUTEX(reboot_lock);
+static struct fb_info *reboot_info;
 
     /*
      *  Interface used by the world
@@ -361,8 +363,8 @@ static unsigned long phys_guiregbase[FB_MAX] __devinitdata = { 0, };
 #define ATI_CHIP_264GTPRO  (ATI_MODERN_SET | M64F_SDRAM_MAGIC_PLL | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D)
 #define ATI_CHIP_264LTPRO  (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D)
 
-#define ATI_CHIP_264XL     (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4)
-#define ATI_CHIP_MOBILITY  (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_MOBIL_BUS)
+#define ATI_CHIP_264XL     (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM)
+#define ATI_CHIP_MOBILITY  (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM | M64F_MOBIL_BUS)
 
 static struct {
 	u16 pci_id;
@@ -539,6 +541,7 @@ static char ram_edo[] __devinitdata = "EDO";
 static char ram_sdram[] __devinitdata = "SDRAM (1:1)";
 static char ram_sgram[] __devinitdata = "SGRAM (1:1)";
 static char ram_sdram32[] __devinitdata = "SDRAM (2:1) (32-bit)";
+static char ram_wram[] __devinitdata = "WRAM";
 static char ram_off[] __devinitdata = "OFF";
 #endif /* CONFIG_FB_ATY_CT */
 
@@ -553,6 +556,10 @@ static char *aty_gx_ram[8] __devinitdata = {
 #ifdef CONFIG_FB_ATY_CT
 static char *aty_ct_ram[8] __devinitdata = {
 	ram_off, ram_dram, ram_edo, ram_edo,
+	ram_sdram, ram_sgram, ram_wram, ram_resv
+};
+static char *aty_xl_ram[8] __devinitdata = {
+	ram_off, ram_dram, ram_edo, ram_edo,
 	ram_sdram, ram_sgram, ram_sdram32, ram_resv
 };
 #endif /* CONFIG_FB_ATY_CT */
@@ -760,6 +767,17 @@ static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc)
 #endif /* CONFIG_FB_ATY_GENERIC_LCD */
 }
 
+static u32 calc_line_length(struct atyfb_par *par, u32 vxres, u32 bpp)
+{
+	u32 line_length = vxres * bpp / 8;
+
+	if (par->ram_type == SGRAM ||
+	    (!M64_HAS(XL_MEM) && par->ram_type == WRAM))
+		line_length = (line_length + 63) & ~63;
+
+	return line_length;
+}
+
 static int aty_var_to_crtc(const struct fb_info *info,
 	const struct fb_var_screeninfo *var, struct crtc *crtc)
 {
@@ -769,13 +787,14 @@ static int aty_var_to_crtc(const struct fb_info *info,
 	u32 h_total, h_disp, h_sync_strt, h_sync_end, h_sync_dly, h_sync_wid, h_sync_pol;
 	u32 v_total, v_disp, v_sync_strt, v_sync_end, v_sync_wid, v_sync_pol, c_sync;
 	u32 pix_width, dp_pix_width, dp_chain_mask;
+	u32 line_length;
 
 	/* input */
-	xres = var->xres;
+	xres = (var->xres + 7) & ~7;
 	yres = var->yres;
-	vxres = var->xres_virtual;
+	vxres = (var->xres_virtual + 7) & ~7;
 	vyres = var->yres_virtual;
-	xoffset = var->xoffset;
+	xoffset = (var->xoffset + 7) & ~7;
 	yoffset = var->yoffset;
 	bpp = var->bits_per_pixel;
 	if (bpp == 16)
@@ -827,7 +846,9 @@ static int aty_var_to_crtc(const struct fb_info *info,
 	} else
 		FAIL("invalid bpp");
 
-	if (vxres * vyres * bpp / 8 > info->fix.smem_len)
+	line_length = calc_line_length(par, vxres, bpp);
+
+	if (vyres * line_length > info->fix.smem_len)
 		FAIL("not enough video RAM");
 
 	h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
@@ -969,7 +990,9 @@ static int aty_var_to_crtc(const struct fb_info *info,
 	crtc->xoffset = xoffset;
 	crtc->yoffset = yoffset;
 	crtc->bpp = bpp;
-	crtc->off_pitch = ((yoffset*vxres+xoffset)*bpp/64) | (vxres<<19);
+	crtc->off_pitch =
+		((yoffset * line_length + xoffset * bpp / 8) / 8) |
+		((line_length / bpp) << 22);
 	crtc->vline_crnt_vline = 0;
 
 	crtc->h_tot_disp = h_total | (h_disp<<16);
@@ -1394,7 +1417,9 @@ static int atyfb_set_par(struct fb_info *info)
 	}
 	aty_st_8(DAC_MASK, 0xff, par);
 
-	info->fix.line_length = var->xres_virtual * var->bits_per_pixel/8;
+	info->fix.line_length = calc_line_length(par, var->xres_virtual,
+						 var->bits_per_pixel);
+
 	info->fix.visual = var->bits_per_pixel <= 8 ?
 		FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
 
@@ -1505,10 +1530,12 @@ static void set_off_pitch(struct atyfb_par *par, const struct fb_info *info)
 {
 	u32 xoffset = info->var.xoffset;
 	u32 yoffset = info->var.yoffset;
-	u32 vxres = par->crtc.vxres;
+	u32 line_length = info->fix.line_length;
 	u32 bpp = info->var.bits_per_pixel;
 
-	par->crtc.off_pitch = ((yoffset * vxres + xoffset) * bpp / 64) | (vxres << 19);
+	par->crtc.off_pitch =
+		((yoffset * line_length + xoffset * bpp / 8) / 8) |
+		((line_length / bpp) << 22);
 }
 
 
@@ -2201,7 +2228,7 @@ static void __devinit aty_calc_mem_refresh(struct atyfb_par *par, int xclk)
 	const int *refresh_tbl;
 	int i, size;
 
-	if (IS_XL(par->pci_id) || IS_MOBILITY(par->pci_id)) {
+	if (M64_HAS(XL_MEM)) {
 		refresh_tbl = ragexl_tbl;
 		size = ARRAY_SIZE(ragexl_tbl);
 	} else {
@@ -2335,7 +2362,10 @@ static int __devinit aty_init(struct fb_info *info)
 		par->pll_ops = &aty_pll_ct;
 		par->bus_type = PCI;
 		par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07);
-		ramname = aty_ct_ram[par->ram_type];
+		if (M64_HAS(XL_MEM))
+			ramname = aty_xl_ram[par->ram_type];
+		else
+			ramname = aty_ct_ram[par->ram_type];
 		/* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */
 		if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM)
 			par->pll_limits.mclk = 63;
@@ -2390,9 +2420,9 @@ static int __devinit aty_init(struct fb_info *info)
 #endif /* CONFIG_FB_ATY_CT */
 
 	/* save previous video mode */
-	aty_get_crtc(par, &saved_crtc);
+	aty_get_crtc(par, &par->saved_crtc);
 	if(par->pll_ops->get_pll)
-		par->pll_ops->get_pll(info, &saved_pll);
+		par->pll_ops->get_pll(info, &par->saved_pll);
 
 	par->mem_cntl = aty_ld_le32(MEM_CNTL, par);
 	gtb_memsize = M64_HAS(GTB_DSP);
@@ -2667,8 +2697,8 @@ static int __devinit aty_init(struct fb_info *info)
 
 aty_init_exit:
 	/* restore video mode */
-	aty_set_crtc(par, &saved_crtc);
-	par->pll_ops->set_pll(info, &saved_pll);
+	aty_set_crtc(par, &par->saved_crtc);
+	par->pll_ops->set_pll(info, &par->saved_pll);
 
 #ifdef CONFIG_MTRR
 	if (par->mtrr_reg >= 0) {
@@ -3502,6 +3532,11 @@ static int __devinit atyfb_pci_probe(struct pci_dev *pdev, const struct pci_devi
 	par->mmap_map[1].prot_flag = _PAGE_E;
 #endif /* __sparc__ */
 
+	mutex_lock(&reboot_lock);
+	if (!reboot_info)
+		reboot_info = info;
+	mutex_unlock(&reboot_lock);
+
 	return 0;
 
 err_release_io:
@@ -3614,8 +3649,8 @@ static void __devexit atyfb_remove(struct fb_info *info)
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
 
 	/* restore video mode */
-	aty_set_crtc(par, &saved_crtc);
-	par->pll_ops->set_pll(info, &saved_pll);
+	aty_set_crtc(par, &par->saved_crtc);
+	par->pll_ops->set_pll(info, &par->saved_pll);
 
 	unregister_framebuffer(info);
 
@@ -3661,6 +3696,11 @@ static void __devexit atyfb_pci_remove(struct pci_dev *pdev)
 {
 	struct fb_info *info = pci_get_drvdata(pdev);
 
+	mutex_lock(&reboot_lock);
+	if (reboot_info == info)
+		reboot_info = NULL;
+	mutex_unlock(&reboot_lock);
+
 	atyfb_remove(info);
 }
 
@@ -3808,6 +3848,56 @@ static int __init atyfb_setup(char *options)
 }
 #endif  /*  MODULE  */
 
+static int atyfb_reboot_notify(struct notifier_block *nb,
+			       unsigned long code, void *unused)
+{
+	struct atyfb_par *par;
+
+	if (code != SYS_RESTART)
+		return NOTIFY_DONE;
+
+	mutex_lock(&reboot_lock);
+
+	if (!reboot_info)
+		goto out;
+
+	if (!lock_fb_info(reboot_info))
+		goto out;
+
+	par = reboot_info->par;
+
+	/*
+	 * HP OmniBook 500's BIOS doesn't like the state of the
+	 * hardware after atyfb has been used. Restore the hardware
+	 * to the original state to allow successful reboots.
+	 */
+	aty_set_crtc(par, &par->saved_crtc);
+	par->pll_ops->set_pll(reboot_info, &par->saved_pll);
+
+	unlock_fb_info(reboot_info);
+ out:
+	mutex_unlock(&reboot_lock);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block atyfb_reboot_notifier = {
+	.notifier_call = atyfb_reboot_notify,
+};
+
+static const struct dmi_system_id atyfb_reboot_ids[] = {
+	{
+		.ident = "HP OmniBook 500",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP OmniBook PC"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "HP OmniBook 500 FA"),
+		},
+	},
+
+	{ }
+};
+
 static int __init atyfb_init(void)
 {
     int err1 = 1, err2 = 1;
@@ -3826,11 +3916,20 @@ static int __init atyfb_init(void)
     err2 = atyfb_atari_probe();
 #endif
 
-    return (err1 && err2) ? -ENODEV : 0;
+    if (err1 && err2)
+	return -ENODEV;
+
+    if (dmi_check_system(atyfb_reboot_ids))
+	register_reboot_notifier(&atyfb_reboot_notifier);
+
+    return 0;
 }
 
 static void __exit atyfb_exit(void)
 {
+	if (dmi_check_system(atyfb_reboot_ids))
+		unregister_reboot_notifier(&atyfb_reboot_notifier);
+
 #ifdef CONFIG_PCI
 	pci_unregister_driver(&atyfb_driver);
 #endif
diff --git a/drivers/video/aty/mach64_accel.c b/drivers/video/aty/mach64_accel.c
index 0cc9724e61a..51fcc0a2c94 100644
--- a/drivers/video/aty/mach64_accel.c
+++ b/drivers/video/aty/mach64_accel.c
@@ -63,14 +63,17 @@ static void reset_GTC_3D_engine(const struct atyfb_par *par)
 void aty_init_engine(struct atyfb_par *par, struct fb_info *info)
 {
 	u32 pitch_value;
+	u32 vxres;
 
 	/* determine modal information from global mode structure */
-	pitch_value = info->var.xres_virtual;
+	pitch_value = info->fix.line_length / (info->var.bits_per_pixel / 8);
+	vxres = info->var.xres_virtual;
 
 	if (info->var.bits_per_pixel == 24) {
 		/* In 24 bpp, the engine is in 8 bpp - this requires that all */
 		/* horizontal coordinates and widths must be adjusted */
 		pitch_value *= 3;
+		vxres *= 3;
 	}
 
 	/* On GTC (RagePro), we need to reset the 3D engine before */
@@ -133,7 +136,7 @@ void aty_init_engine(struct atyfb_par *par, struct fb_info *info)
 	aty_st_le32(SC_LEFT, 0, par);
 	aty_st_le32(SC_TOP, 0, par);
 	aty_st_le32(SC_BOTTOM, par->crtc.vyres - 1, par);
-	aty_st_le32(SC_RIGHT, pitch_value - 1, par);
+	aty_st_le32(SC_RIGHT, vxres - 1, par);
 
 	/* set background color to minimum value (usually BLACK) */
 	aty_st_le32(DP_BKGD_CLR, 0, par);
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index f9d19be0554..3e9923c1735 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -93,6 +93,20 @@ config LCD_HP700
 	  If you have an HP Jornada 700 series handheld (710/720/728)
 	  say Y to enable LCD control driver.
 
+config LCD_JBT6K74
+	tristate "TPO JBT6K74-AS TFT display ASIC control interface"
+	depends on SPI_MASTER && SYSFS && LCD_CLASS_DEVICE
+	help
+	  SPI driver for the control interface of TFT panels containing
+	  the TPO JBT6K74-AS controller ASIC, such as the TPO TD028TTEC1
+	  TFT diplay module used in the Openmoko Freerunner GSM phone.
+
+	  The control interface is required for display operation, as it
+	  controls power management, display timing and gamma calibration.
+
+	  This driver can also be build as a module, if so it will be called
+	  jbt6k74.
+
 #
 # Backlight
 #
@@ -229,3 +243,10 @@ config BACKLIGHT_SAHARA
 	help
 	  If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
 	  backlight driver.
+
+config BACKLIGHT_PCF50633
+	tristate "Backlight driver for NXP PCF50533 MFD"
+	depends on MFD_PCF50633
+	help
+	  If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
+	  enable its driver.
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 4eb178c1d68..63de1884d90 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_LCD_PLATFORM)	   += platform_lcd.o
 obj-$(CONFIG_LCD_VGG2432A4)	   += vgg2432a4.o
 obj-$(CONFIG_LCD_TDO24M)	   += tdo24m.o
 obj-$(CONFIG_LCD_TOSA)		   += tosa_lcd.o
+obj-$(CONFIG_LCD_JBT6K74) 	   += jbt6k74.o
 
 obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
 obj-$(CONFIG_BACKLIGHT_ATMEL_PWM)    += atmel-pwm-bl.o
@@ -24,4 +25,5 @@ obj-$(CONFIG_BACKLIGHT_DA903X)	+= da903x_bl.o
 obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
 obj-$(CONFIG_BACKLIGHT_TOSA)	+= tosa_bl.o
 obj-$(CONFIG_BACKLIGHT_SAHARA)	+= kb3886_bl.o
+obj-$(CONFIG_BACKLIGHT_PCF50633)	+= pcf50633-backlight.o
 
diff --git a/drivers/video/backlight/jbt6k74.c b/drivers/video/backlight/jbt6k74.c
new file mode 100644
index 00000000000..b1aacb7ebcd
--- /dev/null
+++ b/drivers/video/backlight/jbt6k74.c
@@ -0,0 +1,885 @@
+/* Linux kernel driver for the tpo JBT6K74-AS LCM ASIC
+ *
+ * Copyright (C) 2006-2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>,
+ * 	   Stefan Schmidt <stefan@openmoko.org>
+ * Copyright (C) 2008 by Harald Welte <laforge@openmoko.org>
+ * Copyright (C) 2009 by Lars-Peter Clausen <lars@metafoo.de>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/jbt6k74.h>
+#include <linux/fb.h>
+#include <linux/lcd.h>
+#include <linux/time.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio.h>
+
+enum jbt_register {
+	JBT_REG_SLEEP_IN		= 0x10,
+	JBT_REG_SLEEP_OUT		= 0x11,
+
+	JBT_REG_DISPLAY_OFF		= 0x28,
+	JBT_REG_DISPLAY_ON		= 0x29,
+
+	JBT_REG_RGB_FORMAT		= 0x3a,
+	JBT_REG_QUAD_RATE		= 0x3b,
+
+	JBT_REG_POWER_ON_OFF		= 0xb0,
+	JBT_REG_BOOSTER_OP		= 0xb1,
+	JBT_REG_BOOSTER_MODE		= 0xb2,
+	JBT_REG_BOOSTER_FREQ		= 0xb3,
+	JBT_REG_OPAMP_SYSCLK		= 0xb4,
+	JBT_REG_VSC_VOLTAGE		= 0xb5,
+	JBT_REG_VCOM_VOLTAGE		= 0xb6,
+	JBT_REG_EXT_DISPL		= 0xb7,
+	JBT_REG_OUTPUT_CONTROL		= 0xb8,
+	JBT_REG_DCCLK_DCEV		= 0xb9,
+	JBT_REG_DISPLAY_MODE1		= 0xba,
+	JBT_REG_DISPLAY_MODE2		= 0xbb,
+	JBT_REG_DISPLAY_MODE		= 0xbc,
+	JBT_REG_ASW_SLEW		= 0xbd,
+	JBT_REG_DUMMY_DISPLAY		= 0xbe,
+	JBT_REG_DRIVE_SYSTEM		= 0xbf,
+
+	JBT_REG_SLEEP_OUT_FR_A		= 0xc0,
+	JBT_REG_SLEEP_OUT_FR_B		= 0xc1,
+	JBT_REG_SLEEP_OUT_FR_C		= 0xc2,
+	JBT_REG_SLEEP_IN_LCCNT_D	= 0xc3,
+	JBT_REG_SLEEP_IN_LCCNT_E	= 0xc4,
+	JBT_REG_SLEEP_IN_LCCNT_F	= 0xc5,
+	JBT_REG_SLEEP_IN_LCCNT_G	= 0xc6,
+
+	JBT_REG_GAMMA1_FINE_1		= 0xc7,
+	JBT_REG_GAMMA1_FINE_2		= 0xc8,
+	JBT_REG_GAMMA1_INCLINATION	= 0xc9,
+	JBT_REG_GAMMA1_BLUE_OFFSET	= 0xca,
+
+	/* VGA */
+	JBT_REG_BLANK_CONTROL		= 0xcf,
+	JBT_REG_BLANK_TH_TV		= 0xd0,
+	JBT_REG_CKV_ON_OFF		= 0xd1,
+	JBT_REG_CKV_1_2			= 0xd2,
+	JBT_REG_OEV_TIMING		= 0xd3,
+	JBT_REG_ASW_TIMING_1		= 0xd4,
+	JBT_REG_ASW_TIMING_2		= 0xd5,
+
+	/* QVGA */
+	JBT_REG_BLANK_CONTROL_QVGA	= 0xd6,
+	JBT_REG_BLANK_TH_TV_QVGA	= 0xd7,
+	JBT_REG_CKV_ON_OFF_QVGA		= 0xd8,
+	JBT_REG_CKV_1_2_QVGA		= 0xd9,
+	JBT_REG_OEV_TIMING_QVGA		= 0xde,
+	JBT_REG_ASW_TIMING_1_QVGA	= 0xdf,
+	JBT_REG_ASW_TIMING_2_QVGA	= 0xe0,
+
+
+	JBT_REG_HCLOCK_VGA		= 0xec,
+	JBT_REG_HCLOCK_QVGA		= 0xed,
+};
+
+enum jbt_resolution {
+	JBT_RESOLUTION_VGA,
+	JBT_RESOLUTION_QVGA,
+};
+
+enum jbt_power_mode {
+	JBT_POWER_MODE_DEEP_STANDBY,
+	JBT_POWER_MODE_SLEEP,
+	JBT_POWER_MODE_NORMAL,
+};
+
+static const char *jbt_power_mode_names[] = {
+	[JBT_POWER_MODE_DEEP_STANDBY]	= "deep-standby",
+	[JBT_POWER_MODE_SLEEP]		= "sleep",
+	[JBT_POWER_MODE_NORMAL]		= "normal",
+};
+
+static const char *jbt_resolution_names[] = {
+	[JBT_RESOLUTION_VGA] = "vga",
+	[JBT_RESOLUTION_QVGA] = "qvga",
+};
+
+struct jbt_info {
+	struct mutex lock;		/* protects this structure */
+	enum jbt_resolution resolution;
+	enum jbt_power_mode power_mode;
+	enum jbt_power_mode suspend_mode;
+	int suspended;
+
+	struct spi_device *spi;
+	struct lcd_device *lcd_dev;
+
+	unsigned long next_sleep;
+	struct delayed_work blank_work;
+	int blank_mode;
+	struct regulator_bulk_data supplies[2];
+	uint16_t tx_buf[3];
+	uint16_t reg_cache[0xEE];
+};
+
+#define JBT_COMMAND	0x000
+#define JBT_DATA	0x100
+
+static int jbt_reg_write_nodata(struct jbt_info *jbt, uint8_t reg)
+{
+	int ret;
+
+	jbt->tx_buf[0] = JBT_COMMAND | reg;
+	ret = spi_write(jbt->spi, (uint8_t *)jbt->tx_buf,
+					sizeof(uint16_t));
+	if (ret == 0)
+		jbt->reg_cache[reg] = 0;
+	else
+		dev_err(&jbt->spi->dev, "Write failed: %d\n", ret);
+
+	return ret;
+}
+
+
+static int jbt_reg_write(struct jbt_info *jbt, uint8_t reg, uint8_t data)
+{
+	int ret;
+
+	jbt->tx_buf[0] = JBT_COMMAND | reg;
+	jbt->tx_buf[1] = JBT_DATA | data;
+	ret = spi_write(jbt->spi, (uint8_t *)jbt->tx_buf,
+			2*sizeof(uint16_t));
+	if (ret == 0)
+		jbt->reg_cache[reg] = data;
+	else
+		dev_err(&jbt->spi->dev, "Write failed: %d\n", ret);
+
+	return ret;
+}
+
+static int jbt_reg_write16(struct jbt_info *jbt, uint8_t reg, uint16_t data)
+{
+	int ret;
+
+	jbt->tx_buf[0] = JBT_COMMAND | reg;
+	jbt->tx_buf[1] = JBT_DATA | (data >> 8);
+	jbt->tx_buf[2] = JBT_DATA | (data & 0xff);
+
+	ret = spi_write(jbt->spi, (uint8_t *)jbt->tx_buf,
+			3*sizeof(uint16_t));
+	if (ret == 0)
+		jbt->reg_cache[reg] = data;
+	else
+		dev_err(&jbt->spi->dev, "Write failed: %d\n", ret);
+
+	return ret;
+}
+
+static int jbt_init_regs(struct jbt_info *jbt)
+{
+	int ret;
+
+	dev_dbg(&jbt->spi->dev, "entering %cVGA mode\n",
+			jbt->resolution == JBT_RESOLUTION_QVGA ? 'Q' : ' ');
+
+	ret = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE1, 0x01);
+	ret |= jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE2, 0x00);
+	ret |= jbt_reg_write(jbt, JBT_REG_RGB_FORMAT, 0x60);
+	ret |= jbt_reg_write(jbt, JBT_REG_DRIVE_SYSTEM, 0x10);
+	ret |= jbt_reg_write(jbt, JBT_REG_BOOSTER_OP, 0x56);
+	ret |= jbt_reg_write(jbt, JBT_REG_BOOSTER_MODE, 0x33);
+	ret |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11);
+	ret |= jbt_reg_write(jbt, JBT_REG_OPAMP_SYSCLK, 0x02);
+	ret |= jbt_reg_write(jbt, JBT_REG_VSC_VOLTAGE, 0x2b);
+	ret |= jbt_reg_write(jbt, JBT_REG_VCOM_VOLTAGE, 0x40);
+	ret |= jbt_reg_write(jbt, JBT_REG_EXT_DISPL, 0x03);
+	ret |= jbt_reg_write(jbt, JBT_REG_DCCLK_DCEV, 0x04);
+	/*
+	 * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
+	 * to avoid red / blue flicker
+	 */
+	ret |= jbt_reg_write(jbt, JBT_REG_ASW_SLEW, 0x00 | (1 << 5));
+	ret |= jbt_reg_write(jbt, JBT_REG_DUMMY_DISPLAY, 0x00);
+
+	ret |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_A, 0x11);
+	ret |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_B, 0x11);
+	ret |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_C, 0x11);
+	ret |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
+	ret |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
+	ret |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
+	ret |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
+
+	ret |= jbt_reg_write16(jbt, JBT_REG_GAMMA1_FINE_1, 0x5533);
+	ret |= jbt_reg_write(jbt, JBT_REG_GAMMA1_FINE_2, 0x00);
+	ret |= jbt_reg_write(jbt, JBT_REG_GAMMA1_INCLINATION, 0x00);
+	ret |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
+
+	if (jbt->resolution != JBT_RESOLUTION_QVGA) {
+		ret |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_VGA, 0x1f0);
+		ret |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL, 0x02);
+		ret |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804);
+
+		ret |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF, 0x01);
+		ret |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2, 0x0000);
+
+		ret |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING, 0x0d0e);
+		ret |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1, 0x11a4);
+		ret |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2, 0x0e);
+	} else {
+		ret |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff);
+		ret |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL_QVGA, 0x02);
+		ret |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV_QVGA, 0x0804);
+
+		ret |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF_QVGA, 0x01);
+		ret |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2_QVGA, 0x0008);
+
+		ret |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING_QVGA, 0x050a);
+		ret |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1_QVGA, 0x0a19);
+		ret |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2_QVGA, 0x0a);
+	}
+
+	return ret ? -EIO : 0;
+}
+
+static int jbt_standby_to_sleep(struct jbt_info *jbt)
+{
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(jbt->supplies), jbt->supplies);
+
+	/* three times command zero */
+	ret |= jbt_reg_write_nodata(jbt, 0x00);
+	mdelay(1);
+	ret |= jbt_reg_write_nodata(jbt, 0x00);
+	mdelay(1);
+	ret |= jbt_reg_write_nodata(jbt, 0x00);
+	mdelay(1);
+
+	/* deep standby out */
+	ret |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x11);
+	mdelay(1);
+	ret = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x28);
+
+	/* (re)initialize register set */
+	ret |= jbt_init_regs(jbt);
+
+	return ret ? -EIO : 0;
+}
+
+static int jbt_sleep_to_normal(struct jbt_info *jbt)
+{
+	int ret;
+
+	/* Make sure we are 120 ms after SLEEP_OUT */
+	if (time_before(jiffies, jbt->next_sleep))
+		mdelay(jiffies_to_msecs(jbt->next_sleep - jiffies));
+
+	if (jbt->resolution == JBT_RESOLUTION_VGA) {
+		/* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
+		ret = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x80);
+
+		/* Quad mode off */
+		ret |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x00);
+	} else {
+		/* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
+		ret = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x81);
+
+		/* Quad mode on */
+		ret |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x22);
+	}
+
+	/* AVDD on, XVDD on */
+	ret |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16);
+
+	/* Output control */
+	ret |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xdff9);
+
+	/* Turn on display */
+	ret |= jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_ON);
+
+	/* Sleep mode off */
+	ret |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT);
+	jbt->next_sleep = jiffies + msecs_to_jiffies(120);
+
+	/* Allow the booster and display controller to restart stably */
+	mdelay(5);
+
+	return ret ? -EIO : 0;
+}
+
+static int jbt_normal_to_sleep(struct jbt_info *jbt)
+{
+	int ret;
+
+	/* Make sure we are 120 ms after SLEEP_OUT */
+	while (time_before(jiffies, jbt->next_sleep))
+		cpu_relax();
+
+	ret = jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
+	ret |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0x8000 | 1 << 3);
+	ret |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_IN);
+	jbt->next_sleep = jiffies + msecs_to_jiffies(120);
+
+	/* Allow the internal circuits to stop automatically */
+	mdelay(5);
+
+	return ret ? -EIO : 0;
+}
+
+static int jbt_sleep_to_standby(struct jbt_info *jbt)
+{
+	int ret;
+	ret = jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x00);
+	ret |= regulator_bulk_disable(ARRAY_SIZE(jbt->supplies), jbt->supplies);
+
+	return ret;
+}
+
+static int jbt6k74_enter_power_mode(struct jbt_info *jbt,
+					enum jbt_power_mode new_mode)
+{
+	struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data;
+	int ret = -EINVAL;
+
+	dev_dbg(&jbt->spi->dev, "entering (old_state=%s, new_state=%s)\n",
+			jbt_power_mode_names[jbt->power_mode],
+			jbt_power_mode_names[new_mode]);
+
+	mutex_lock(&jbt->lock);
+
+	if (jbt->suspended) {
+		switch (new_mode) {
+		case JBT_POWER_MODE_DEEP_STANDBY:
+		case JBT_POWER_MODE_SLEEP:
+		case JBT_POWER_MODE_NORMAL:
+			ret = 0;
+			jbt->suspend_mode = new_mode;
+			break;
+		default:
+			break;
+		}
+	} else if (new_mode == JBT_POWER_MODE_NORMAL &&
+			pdata->enable_pixel_clock) {
+		pdata->enable_pixel_clock(&jbt->spi->dev, 1);
+	}
+
+	switch (jbt->power_mode) {
+	case JBT_POWER_MODE_DEEP_STANDBY:
+		switch (new_mode) {
+		case JBT_POWER_MODE_DEEP_STANDBY:
+			ret = 0;
+			break;
+		case JBT_POWER_MODE_SLEEP:
+			ret = jbt_standby_to_sleep(jbt);
+			break;
+		case JBT_POWER_MODE_NORMAL:
+			/* first transition into sleep */
+			ret = jbt_standby_to_sleep(jbt);
+			/* then transition into normal */
+			ret |= jbt_sleep_to_normal(jbt);
+			break;
+		}
+		break;
+	case JBT_POWER_MODE_SLEEP:
+		switch (new_mode) {
+		case JBT_POWER_MODE_SLEEP:
+			ret = 0;
+			break;
+		case JBT_POWER_MODE_DEEP_STANDBY:
+			ret = jbt_sleep_to_standby(jbt);
+			break;
+		case JBT_POWER_MODE_NORMAL:
+			ret = jbt_sleep_to_normal(jbt);
+			break;
+		}
+		break;
+	case JBT_POWER_MODE_NORMAL:
+		switch (new_mode) {
+		case JBT_POWER_MODE_NORMAL:
+			ret = 0;
+			break;
+		case JBT_POWER_MODE_DEEP_STANDBY:
+			/* first transition into sleep */
+			ret = jbt_normal_to_sleep(jbt);
+			/* then transition into deep standby */
+			ret |= jbt_sleep_to_standby(jbt);
+			break;
+		case JBT_POWER_MODE_SLEEP:
+			ret = jbt_normal_to_sleep(jbt);
+			break;
+		}
+	}
+
+	if (ret == 0) {
+		jbt->power_mode = new_mode;
+		if (new_mode != JBT_POWER_MODE_NORMAL &&
+			pdata->enable_pixel_clock)
+			pdata->enable_pixel_clock(&jbt->spi->dev, 0);
+	} else {
+		dev_err(&jbt->spi->dev, "Failed enter state '%s')\n",
+				jbt_power_mode_names[new_mode]);
+	}
+
+	mutex_unlock(&jbt->lock);
+
+	return ret;
+}
+
+static int jbt6k74_set_resolution(struct jbt_info *jbt,
+					enum jbt_resolution new_resolution)
+{
+	int ret = 0;
+	enum jbt_resolution old_resolution;
+
+	mutex_lock(&jbt->lock);
+
+	if (jbt->resolution == new_resolution)
+		goto out_unlock;
+
+	old_resolution = jbt->resolution;
+	jbt->resolution = new_resolution;
+
+	if (jbt->power_mode == JBT_POWER_MODE_NORMAL) {
+
+		/* first transition into sleep */
+		ret = jbt_normal_to_sleep(jbt);
+		ret |= jbt_sleep_to_normal(jbt);
+
+		if (ret) {
+			jbt->resolution = old_resolution;
+			dev_err(&jbt->spi->dev, "Failed to set resolution '%s')\n",
+				jbt_resolution_names[new_resolution]);
+		}
+	}
+
+out_unlock:
+	mutex_unlock(&jbt->lock);
+
+	return ret;
+}
+
+static ssize_t resolution_read(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct jbt_info *jbt = dev_get_drvdata(dev);
+
+	if (jbt->resolution >= ARRAY_SIZE(jbt_resolution_names))
+		return -EIO;
+
+	return sprintf(buf, "%s\n", jbt_resolution_names[jbt->resolution]);
+}
+
+static ssize_t resolution_write(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct jbt_info *jbt = dev_get_drvdata(dev);
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(jbt_resolution_names); i++) {
+		if (!strncmp(buf, jbt_resolution_names[i],
+			strlen(jbt_resolution_names[i]))) {
+			ret = jbt6k74_set_resolution(jbt, i);
+			if (ret)
+				return ret;
+			return count;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static DEVICE_ATTR(resolution, 0644, resolution_read, resolution_write);
+
+static int reg_by_string(const char *name)
+{
+	if (!strcmp(name, "gamma_fine1"))
+		return JBT_REG_GAMMA1_FINE_1;
+	else if (!strcmp(name, "gamma_fine2"))
+		return JBT_REG_GAMMA1_FINE_2;
+	else if (!strcmp(name, "gamma_inclination"))
+		return JBT_REG_GAMMA1_INCLINATION;
+	else
+		return JBT_REG_GAMMA1_BLUE_OFFSET;
+}
+
+static ssize_t gamma_read(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct jbt_info *jbt = dev_get_drvdata(dev);
+	int reg = reg_by_string(attr->attr.name);
+	uint16_t val;
+
+	mutex_lock(&jbt->lock);
+	val = jbt->reg_cache[reg];
+	mutex_unlock(&jbt->lock);
+
+	return sprintf(buf, "0x%04x\n", val);
+}
+
+static ssize_t gamma_write(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	int ret;
+	struct jbt_info *jbt = dev_get_drvdata(dev);
+	int reg = reg_by_string(attr->attr.name);
+	unsigned long val;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	mutex_lock(&jbt->lock);
+	jbt_reg_write(jbt, reg, val & 0xff);
+	mutex_unlock(&jbt->lock);
+
+	return count;
+}
+
+static ssize_t reset_write(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	int ret;
+	struct jbt_info *jbt = dev_get_drvdata(dev);
+	struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data;
+	enum jbt_power_mode old_power_mode = jbt->power_mode;
+
+	mutex_lock(&jbt->lock);
+
+	if (gpio_is_valid(pdata->gpio_reset)) {
+		/* hard reset the jbt6k74 */
+		gpio_set_value_cansleep(pdata->gpio_reset, 0);
+		mdelay(120);
+		gpio_set_value_cansleep(pdata->gpio_reset, 1);
+		mdelay(120);
+	}
+
+	ret = jbt_reg_write_nodata(jbt, 0x01);
+	if (ret < 0)
+		dev_err(&jbt->spi->dev, "cannot soft reset\n");
+	mdelay(120);
+
+	mutex_unlock(&jbt->lock);
+
+	jbt->power_mode = JBT_POWER_MODE_DEEP_STANDBY;
+	jbt6k74_enter_power_mode(jbt, old_power_mode);
+
+	return count;
+}
+
+static DEVICE_ATTR(gamma_fine1, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_fine2, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_inclination, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_blue_offset, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(reset, 0600, NULL, reset_write);
+
+static struct attribute *jbt_sysfs_entries[] = {
+	&dev_attr_resolution.attr,
+	&dev_attr_gamma_fine1.attr,
+	&dev_attr_gamma_fine2.attr,
+	&dev_attr_gamma_inclination.attr,
+	&dev_attr_gamma_blue_offset.attr,
+	&dev_attr_reset.attr,
+	NULL,
+};
+
+static struct attribute_group jbt_attr_group = {
+	.name	= NULL,
+	.attrs	= jbt_sysfs_entries,
+};
+
+/* FIXME: This in an ugly hack to delay display blanking.
+  When the jbt is in sleep mode it displays an all white screen and thus one
+  will a see a short flash.
+  By delaying the blanking we will give the backlight a chance to turn off and
+  thus avoid getting the flash */
+static void jbt_blank_worker(struct work_struct *work)
+{
+	struct jbt_info *jbt  = container_of(work, struct jbt_info,
+						blank_work.work);
+
+	switch (jbt->blank_mode) {
+	case FB_BLANK_NORMAL:
+		jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_SLEEP);
+		break;
+	case FB_BLANK_POWERDOWN:
+		jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_DEEP_STANDBY);
+		break;
+	default:
+		break;
+	}
+}
+
+static int jbt6k74_set_mode(struct lcd_device *ld, struct fb_videomode *m)
+{
+	int ret = -EINVAL;
+	struct jbt_info *jbt = dev_get_drvdata(&ld->dev);
+
+	if (m->xres == 240 && m->yres == 320) {
+		ret = jbt6k74_set_resolution(jbt, JBT_RESOLUTION_QVGA);
+	} else if (m->xres == 480 && m->yres == 640) {
+		ret = jbt6k74_set_resolution(jbt, JBT_RESOLUTION_VGA);
+	} else {
+		dev_err(&jbt->spi->dev, "Unknown resolution.\n");
+		jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_SLEEP);
+	}
+
+	return ret;
+}
+
+static int jbt6k74_set_power(struct lcd_device *ld, int power)
+{
+	int ret = -EINVAL;
+	struct jbt_info *jbt = dev_get_drvdata(&ld->dev);
+
+	jbt->blank_mode = power;
+	cancel_rearming_delayed_work(&jbt->blank_work);
+
+	switch (power) {
+	case FB_BLANK_UNBLANK:
+		dev_dbg(&jbt->spi->dev, "unblank\n");
+		ret = jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL);
+		break;
+	case FB_BLANK_NORMAL:
+		dev_dbg(&jbt->spi->dev, "blank\n");
+		ret = schedule_delayed_work(&jbt->blank_work, HZ);
+		break;
+	case FB_BLANK_POWERDOWN:
+		dev_dbg(&jbt->spi->dev, "powerdown\n");
+		ret = schedule_delayed_work(&jbt->blank_work, HZ);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static int jbt6k74_get_power(struct lcd_device *ld)
+{
+	struct jbt_info *jbt = dev_get_drvdata(&ld->dev);
+
+	switch (jbt->power_mode) {
+	case JBT_POWER_MODE_NORMAL:
+		return FB_BLANK_UNBLANK;
+	case JBT_POWER_MODE_SLEEP:
+		return FB_BLANK_NORMAL;
+	default:
+		return JBT_POWER_MODE_DEEP_STANDBY;
+	}
+}
+
+struct lcd_ops jbt6k74_lcd_ops = {
+	.set_power = jbt6k74_set_power,
+	.get_power = jbt6k74_get_power,
+	.set_mode  = jbt6k74_set_mode,
+};
+
+/* linux device model infrastructure */
+
+static int __devinit jbt_probe(struct spi_device *spi)
+{
+	int ret;
+	struct jbt_info *jbt;
+	struct jbt6k74_platform_data *pdata = spi->dev.platform_data;
+
+	/* the controller doesn't have a MISO pin; we can't do detection */
+
+	spi->mode = SPI_CPOL | SPI_CPHA;
+	spi->bits_per_word = 9;
+
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		dev_err(&spi->dev,
+			"Failed to setup spi\n");
+		return ret;
+	}
+
+	jbt = kzalloc(sizeof(*jbt), GFP_KERNEL);
+	if (!jbt)
+		return -ENOMEM;
+
+	jbt->spi = spi;
+
+	jbt->lcd_dev = lcd_device_register("jbt6k74-lcd", &spi->dev, jbt,
+						&jbt6k74_lcd_ops);
+
+	if (IS_ERR(jbt->lcd_dev)) {
+		ret = PTR_ERR(jbt->lcd_dev);
+		goto err_free_drvdata;
+	}
+
+	INIT_DELAYED_WORK(&jbt->blank_work, jbt_blank_worker);
+
+	jbt->resolution = JBT_RESOLUTION_VGA;
+	jbt->power_mode = JBT_POWER_MODE_DEEP_STANDBY;
+	jbt->next_sleep = jiffies + msecs_to_jiffies(120);
+	mutex_init(&jbt->lock);
+
+	dev_set_drvdata(&spi->dev, jbt);
+
+	jbt->supplies[0].supply = "VDC";
+	jbt->supplies[1].supply = "VDDIO";
+
+	ret = regulator_bulk_get(NULL, ARRAY_SIZE(jbt->supplies),
+					jbt->supplies);
+	if (ret) {
+		dev_err(&spi->dev, "Failed to power get supplies: %d\n", ret);
+		goto err_unregister_lcd;
+	}
+
+	if (gpio_is_valid(pdata->gpio_reset)) {
+		ret = gpio_request(pdata->gpio_reset, "jbt6k74 reset");
+		if (ret) {
+			dev_err(&spi->dev, "Failed to request reset gpio: %d\n",
+				ret);
+			goto err_free_supplies;
+		}
+
+		ret = gpio_direction_output(pdata->gpio_reset, 1);
+		if (ret) {
+			dev_err(&spi->dev, "Failed to set reset gpio direction: %d\n",
+				ret);
+			goto err_gpio_free;
+		}
+	}
+
+	ret = jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL);
+	if (ret < 0) {
+		dev_err(&spi->dev, "cannot enter NORMAL state\n");
+		goto err_gpio_free;
+	}
+
+	ret = sysfs_create_group(&spi->dev.kobj, &jbt_attr_group);
+	if (ret < 0) {
+		dev_err(&spi->dev, "cannot create sysfs group\n");
+		goto err_standby;
+	}
+
+
+	if (pdata->probe_completed)
+		(pdata->probe_completed)(&spi->dev);
+
+	return 0;
+
+err_standby:
+	jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_DEEP_STANDBY);
+err_gpio_free:
+	gpio_free(pdata->gpio_reset);
+err_free_supplies:
+	regulator_bulk_free(ARRAY_SIZE(jbt->supplies), jbt->supplies);
+err_unregister_lcd:
+	lcd_device_unregister(jbt->lcd_dev);
+err_free_drvdata:
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(jbt);
+
+	return ret;
+}
+
+static int __devexit jbt_remove(struct spi_device *spi)
+{
+	struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+	struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data;
+
+	/* We don't want to switch off the display in case the user
+	 * accidentially unloads the module (whose use count normally is 0) */
+	jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL);
+
+	sysfs_remove_group(&spi->dev.kobj, &jbt_attr_group);
+
+	if (gpio_is_valid(pdata->gpio_reset))
+		gpio_free(pdata->gpio_reset);
+
+	lcd_device_unregister(jbt->lcd_dev);
+
+	dev_set_drvdata(&spi->dev, NULL);
+
+	regulator_bulk_free(ARRAY_SIZE(jbt->supplies), jbt->supplies);
+	kfree(jbt);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int jbt_suspend(struct spi_device *spi, pm_message_t state)
+{
+	struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+
+	jbt->suspend_mode = jbt->power_mode;
+
+	jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_DEEP_STANDBY);
+	jbt->suspended = 1;
+
+	dev_info(&spi->dev, "suspended\n");
+
+	return 0;
+}
+
+int jbt6k74_resume(struct spi_device *spi)
+{
+	struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+	dev_info(&spi->dev, "starting resume: %d\n", jbt->suspend_mode);
+
+	mdelay(20);
+
+	jbt->suspended = 0;
+	jbt6k74_enter_power_mode(jbt, jbt->suspend_mode);
+
+	dev_info(&spi->dev, "resumed: %d\n", jbt->suspend_mode);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(jbt6k74_resume);
+
+#else
+#define jbt_suspend	NULL
+#define jbt6k74_resume	NULL
+#endif
+
+static struct spi_driver jbt6k74_driver = {
+	.driver = {
+		.name	= "jbt6k74",
+		.owner	= THIS_MODULE,
+	},
+
+	.probe	 = jbt_probe,
+	.remove	 = __devexit_p(jbt_remove),
+	.suspend = jbt_suspend,
+	.resume	 = jbt6k74_resume,
+};
+
+static int __init jbt_init(void)
+{
+	return spi_register_driver(&jbt6k74_driver);
+}
+module_init(jbt_init);
+
+static void __exit jbt_exit(void)
+{
+	spi_unregister_driver(&jbt6k74_driver);
+}
+module_exit(jbt_exit);
+
+MODULE_DESCRIPTION("SPI driver for tpo JBT6K74-AS LCM control interface");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/jornada720_bl.c b/drivers/video/backlight/jornada720_bl.c
index c3ebb6b41ce..7aed2565c1b 100644
--- a/drivers/video/backlight/jornada720_bl.c
+++ b/drivers/video/backlight/jornada720_bl.c
@@ -72,7 +72,7 @@ static int jornada_bl_update_status(struct backlight_device *bd)
 		if (jornada_ssp_byte(SETBRIGHTNESS) != TXDUMMY) {
 			printk(KERN_INFO "bl : failed to set brightness\n");
 			ret = -ETIMEDOUT;
-			goto out
+			goto out;
 		}
 
 		/* at this point we expect that the mcu has accepted
diff --git a/drivers/video/backlight/pcf50633-backlight.c b/drivers/video/backlight/pcf50633-backlight.c
new file mode 100644
index 00000000000..10b9c31bc43
--- /dev/null
+++ b/drivers/video/backlight/pcf50633-backlight.c
@@ -0,0 +1,185 @@
+/*
+ *  Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ *  	PCF50633 backlight device driver
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/backlight.h>
+
+struct pcf50633_bl {
+	struct pcf50633 *pcf;
+	struct backlight_device *bl;
+
+	unsigned int brightness;
+	unsigned int brightness_limit;
+};
+
+/*
+ * pcf50633_bl_set_brightness_limit
+ *
+ * Update the brightness limit for the pc50633 backlight. The actuall brightness
+ * will not go above the limit. This is useful to limit power drain for example
+ * on low battery.
+ *
+ * @dev: Pointer to a pcf50633 device
+ * @limit: The brightness limit. Valid values are 0-63
+ */
+int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit)
+{
+	struct pcf50633_bl *pcf_bl = platform_get_drvdata(pcf->bl_pdev);
+
+	if (!pcf_bl)
+		return -ENODEV;
+
+	pcf_bl->brightness_limit = limit & 0x3f;
+	backlight_update_status(pcf_bl->bl);
+
+    return 0;
+}
+
+static int pcf50633_bl_update_status(struct backlight_device *bl)
+{
+	struct pcf50633_bl *pcf_bl = bl_get_data(bl);
+	unsigned int new_brightness;
+
+
+	if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK) ||
+		bl->props.power != FB_BLANK_UNBLANK)
+		new_brightness = 0;
+	else if (bl->props.brightness < pcf_bl->brightness_limit)
+		new_brightness = bl->props.brightness;
+	else
+		new_brightness = pcf_bl->brightness_limit;
+
+
+	if (pcf_bl->brightness == new_brightness)
+		return 0;
+
+	if (new_brightness) {
+		pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDOUT,
+					new_brightness);
+		if (!pcf_bl->brightness)
+			pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 1);
+	} else {
+		pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 0);
+	}
+
+	pcf_bl->brightness = new_brightness;
+
+	return 0;
+}
+
+static int pcf50633_bl_get_brightness(struct backlight_device *bl)
+{
+	struct pcf50633_bl *pcf_bl = bl_get_data(bl);
+	return pcf_bl->brightness;
+}
+
+static struct backlight_ops pcf50633_bl_ops = {
+	.get_brightness = pcf50633_bl_get_brightness,
+	.update_status	= pcf50633_bl_update_status,
+	.options	= BL_CORE_SUSPENDRESUME,
+};
+
+static int __devinit pcf50633_bl_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct pcf50633_bl *pcf_bl;
+	struct pcf50633_platform_data *pcf50633_data = pdev->dev.parent->platform_data;
+	struct pcf50633_bl_platform_data *pdata = pcf50633_data->backlight_data;
+
+	pcf_bl = kzalloc(sizeof(*pcf_bl), GFP_KERNEL);
+	if (!pcf_bl)
+		return -ENOMEM;
+
+	pcf_bl->pcf = dev_to_pcf50633(pdev->dev.parent);
+
+	pcf_bl->bl = backlight_device_register(pdev->name, &pdev->dev, pcf_bl,
+						&pcf50633_bl_ops);
+
+	if (IS_ERR(pcf_bl->bl)) {
+		ret = PTR_ERR(pcf_bl->bl);
+		goto err_free;
+	}
+
+	platform_set_drvdata(pdev, pcf_bl);
+
+	pcf_bl->bl->props.max_brightness = 0x3f;
+	pcf_bl->bl->props.power = FB_BLANK_UNBLANK;
+
+	if (pdata) {
+		pcf_bl->bl->props.brightness = pdata->default_brightness;
+		pcf_bl->brightness_limit = pdata->default_brightness_limit;
+	} else {
+		pcf_bl->bl->props.brightness = 0x3f;
+		pcf_bl->brightness_limit = 0x3f;
+	}
+
+	pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDDIM, pdata->ramp_time);
+
+	/* Should be different from props.brightness, so we don't
+	 * update_status early the first time it's called */
+	pcf_bl->brightness = pcf_bl->bl->props.brightness + 1;
+
+	backlight_update_status(pcf_bl->bl);
+
+	return 0;
+
+err_free:
+	kfree(pcf_bl);
+
+	return ret;
+}
+
+static int __devexit pcf50633_bl_remove(struct platform_device *pdev)
+{
+	struct pcf50633_bl *pcf_bl = platform_get_drvdata(pdev);
+
+	backlight_device_unregister(pcf_bl->bl);
+
+	platform_set_drvdata(pdev, NULL);
+
+	kfree(pcf_bl);
+
+	return 0;
+}
+
+static struct platform_driver pcf50633_bl_driver = {
+	.probe =	pcf50633_bl_probe,
+	.remove =	__devexit_p(pcf50633_bl_remove),
+	.driver = {
+		.name = "pcf50633-backlight",
+	},
+};
+
+static int __init pcf50633_bl_init(void)
+{
+	return platform_driver_register(&pcf50633_bl_driver);
+}
+module_init(pcf50633_bl_init);
+
+static void __exit pcf50633_bl_exit(void)
+{
+	platform_driver_unregister(&pcf50633_bl_driver);
+}
+module_exit(pcf50633_bl_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("PCF50633 backlight driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcf50633-backlight");
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index e641584e212..88716626744 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -145,6 +145,8 @@ static int pwm_backlight_suspend(struct platform_device *pdev,
 	struct backlight_device *bl = platform_get_drvdata(pdev);
 	struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
 
+	if (pb->notify)
+		pb->notify(0);
 	pwm_config(pb->pwm, 0, pb->period);
 	pwm_disable(pb->pwm);
 	return 0;
diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c
index 1dae7f8f3c6..51422fc4f60 100644
--- a/drivers/video/backlight/tdo24m.c
+++ b/drivers/video/backlight/tdo24m.c
@@ -356,7 +356,7 @@ static int __devinit tdo24m_probe(struct spi_device *spi)
 	lcd->power = FB_BLANK_POWERDOWN;
 	lcd->mode = MODE_VGA;	/* default to VGA */
 
-	lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, sizeof(GFP_KERNEL));
+	lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, GFP_KERNEL);
 	if (lcd->buf == NULL) {
 		kfree(lcd);
 		return -ENOMEM;
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c
index 7bad24ed04e..108b89e09a8 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/cobalt_lcdfb.c
@@ -1,7 +1,7 @@
 /*
  *  Cobalt server LCD frame buffer driver.
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 471a9a60376..3a44695b9c0 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -1082,7 +1082,6 @@ static void fbcon_init(struct vc_data *vc, int init)
 	new_rows = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres);
 	new_cols /= vc->vc_font.width;
 	new_rows /= vc->vc_font.height;
-	vc_resize(vc, new_cols, new_rows);
 
 	/*
 	 * We must always set the mode. The mode of the previous console
@@ -1111,10 +1110,11 @@ static void fbcon_init(struct vc_data *vc, int init)
 	 *  vc_{cols,rows}, but we must not set those if we are only
 	 *  resizing the console.
 	 */
-	if (!init) {
+	if (init) {
 		vc->vc_cols = new_cols;
 		vc->vc_rows = new_rows;
-	}
+	} else
+		vc_resize(vc, new_cols, new_rows);
 
 	if (logo)
 		fbcon_prepare_logo(vc, info, cols, rows, new_cols, new_rows);
diff --git a/drivers/video/console/fbcon_rotate.h b/drivers/video/console/fbcon_rotate.h
index 75be5ce53dc..e233444cda6 100644
--- a/drivers/video/console/fbcon_rotate.h
+++ b/drivers/video/console/fbcon_rotate.h
@@ -45,7 +45,7 @@ static inline void rotate_ud(const char *in, char *out, u32 width, u32 height)
 	width = (width + 7) & ~7;
 
 	for (i = 0; i < height; i++) {
-		for (j = 0; j < width; j++) {
+		for (j = 0; j < width - shift; j++) {
 			if (pattern_test_bit(j, i, width, in))
 				pattern_set_bit(width - (1 + j + shift),
 						height - (1 + i),
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index ef7870f5ea0..857b3668b3b 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -957,9 +957,14 @@ static int __devinit sticore_pci_init(struct pci_dev *pd,
 #ifdef CONFIG_PCI
 	unsigned long fb_base, rom_base;
 	unsigned int fb_len, rom_len;
+	int err;
 	struct sti_struct *sti;
 	
-	pci_enable_device(pd);
+	err = pci_enable_device(pd);
+	if (err < 0) {
+		dev_err(&pd->dev, "Cannot enable PCI device\n");
+		return err;
+	}
 
 	fb_base = pci_resource_start(pd, 0);
 	fb_len = pci_resource_len(pd, 0);
@@ -1048,7 +1053,7 @@ static void __devinit sti_init_roms(void)
 
 	/* Register drivers for native & PCI cards */
 	register_parisc_driver(&pa_sti_driver);
-	pci_register_driver(&pci_sti_driver);
+	WARN_ON(pci_register_driver(&pci_sti_driver));
 
 	/* if we didn't find the given default sti, take the first one */
 	if (!default_sti)
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index f8a09bf8d0c..a85c818be94 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -16,7 +16,6 @@
 #include <linux/compat.h>
 #include <linux/types.h>
 #include <linux/errno.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/major.h>
 #include <linux/slab.h>
@@ -1310,8 +1309,6 @@ static long fb_compat_ioctl(struct file *file, unsigned int cmd,
 
 static int
 fb_mmap(struct file *file, struct vm_area_struct * vma)
-__acquires(&info->lock)
-__releases(&info->lock)
 {
 	int fbidx = iminor(file->f_path.dentry->d_inode);
 	struct fb_info *info = registered_fb[fbidx];
@@ -1325,16 +1322,14 @@ __releases(&info->lock)
 	off = vma->vm_pgoff << PAGE_SHIFT;
 	if (!fb)
 		return -ENODEV;
+	mutex_lock(&info->mm_lock);
 	if (fb->fb_mmap) {
 		int res;
-		mutex_lock(&info->lock);
 		res = fb->fb_mmap(info, vma);
-		mutex_unlock(&info->lock);
+		mutex_unlock(&info->mm_lock);
 		return res;
 	}
 
-	mutex_lock(&info->lock);
-
 	/* frame buffer memory */
 	start = info->fix.smem_start;
 	len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.smem_len);
@@ -1342,13 +1337,13 @@ __releases(&info->lock)
 		/* memory mapped io */
 		off -= len;
 		if (info->var.accel_flags) {
-			mutex_unlock(&info->lock);
+			mutex_unlock(&info->mm_lock);
 			return -EINVAL;
 		}
 		start = info->fix.mmio_start;
 		len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.mmio_len);
 	}
-	mutex_unlock(&info->lock);
+	mutex_unlock(&info->mm_lock);
 	start &= PAGE_MASK;
 	if ((vma->vm_end - vma->vm_start + off) > len)
 		return -EINVAL;
@@ -1518,6 +1513,7 @@ register_framebuffer(struct fb_info *fb_info)
 			break;
 	fb_info->node = i;
 	mutex_init(&fb_info->lock);
+	mutex_init(&fb_info->mm_lock);
 
 	fb_info->dev = device_create(fb_class, fb_info->device,
 				     MKDEV(FB_MAJOR, i), NULL, "fb%d", i);
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 5c1a2c01778..9ae9cd32bd0 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -256,8 +256,8 @@ static void fix_edid(unsigned char *edid, int fix)
 
 static int edid_checksum(unsigned char *edid)
 {
-	unsigned char i, csum = 0, all_null = 0;
-	int err = 0, fix = check_edid(edid);
+	unsigned char csum = 0, all_null = 0;
+	int i, err = 0, fix = check_edid(edid);
 
 	if (fix)
 		fix_edid(edid, fix);
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index f153c581cbd..72d68b3dc47 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -750,24 +750,26 @@ static void update_lcdc(struct fb_info *info)
 static int map_video_memory(struct fb_info *info)
 {
 	phys_addr_t phys;
+	u32 smem_len = info->fix.line_length * info->var.yres_virtual;
 
 	pr_debug("info->var.xres_virtual = %d\n", info->var.xres_virtual);
 	pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
 	pr_debug("info->fix.line_length  = %d\n", info->fix.line_length);
+	pr_debug("MAP_VIDEO_MEMORY: smem_len = %u\n", smem_len);
 
-	info->fix.smem_len = info->fix.line_length * info->var.yres_virtual;
-	pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len);
-	info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys);
+	info->screen_base = fsl_diu_alloc(smem_len, &phys);
 	if (info->screen_base == NULL) {
 		printk(KERN_ERR "Unable to allocate fb memory\n");
 		return -ENOMEM;
 	}
+	mutex_lock(&info->mm_lock);
 	info->fix.smem_start = (unsigned long) phys;
+	info->fix.smem_len = smem_len;
+	mutex_unlock(&info->mm_lock);
 	info->screen_size = info->fix.smem_len;
 
 	pr_debug("Allocated fb @ paddr=0x%08lx, size=%d.\n",
-				info->fix.smem_start,
-		info->fix.smem_len);
+		 info->fix.smem_start, info->fix.smem_len);
 	pr_debug("screen base %p\n", info->screen_base);
 
 	return 0;
@@ -776,9 +778,11 @@ static int map_video_memory(struct fb_info *info)
 static void unmap_video_memory(struct fb_info *info)
 {
 	fsl_diu_free(info->screen_base, info->fix.smem_len);
+	mutex_lock(&info->mm_lock);
 	info->screen_base = NULL;
 	info->fix.smem_start = 0;
 	info->fix.smem_len = 0;
+	mutex_unlock(&info->mm_lock);
 }
 
 /*
@@ -1219,12 +1223,6 @@ static int __devinit install_fb(struct fb_info *info)
 		return -EINVAL;
 	}
 
-	if (fsl_diu_set_par(info)) {
-		printk(KERN_ERR "fb_set_par failed");
-		fb_dealloc_cmap(&info->cmap);
-		return -EINVAL;
-	}
-
 	if (register_framebuffer(info) < 0) {
 		printk(KERN_ERR "register_framebuffer failed");
 		unmap_video_memory(info);
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 020db7fc915..e7116a6d82d 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -44,9 +44,6 @@ static struct fb_fix_screeninfo hitfb_fix __initdata = {
 	.accel		= FB_ACCEL_NONE,
 };
 
-static u32 pseudo_palette[16];
-static struct fb_info fb_info;
-
 static inline void hitfb_accel_wait(void)
 {
 	while (fb_readw(HD64461_GRCFGR) & HD64461_GRCFGR_ACCSTATUS) ;
@@ -331,6 +328,8 @@ static struct fb_ops hitfb_ops = {
 static int __init hitfb_probe(struct platform_device *dev)
 {
 	unsigned short lcdclor, ldr3, ldvndr;
+	struct fb_info *info;
+	int ret;
 
 	if (fb_get_options("hitfb", NULL))
 		return -ENODEV;
@@ -384,32 +383,53 @@ static int __init hitfb_probe(struct platform_device *dev)
 		break;
 	}
 
-	fb_info.fbops = &hitfb_ops;
-	fb_info.var = hitfb_var;
-	fb_info.fix = hitfb_fix;
-	fb_info.pseudo_palette = pseudo_palette;
-	fb_info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
+	info = framebuffer_alloc(sizeof(u32) * 16, &dev->dev);
+	if (unlikely(!info))
+		return -ENOMEM;
+
+	info->fbops = &hitfb_ops;
+	info->var = hitfb_var;
+	info->fix = hitfb_fix;
+	info->pseudo_palette = info->par;
+	info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
 		FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
 
-	fb_info.screen_base = (void *)hitfb_fix.smem_start;
+	info->screen_base = (void *)hitfb_fix.smem_start;
 
-	fb_alloc_cmap(&fb_info.cmap, 256, 0);
+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (unlikely(ret < 0))
+		goto err_fb;
 
-	if (register_framebuffer(&fb_info) < 0)
-		return -EINVAL;
+	ret = register_framebuffer(info);
+	if (unlikely(ret < 0))
+		goto err;
+
+	platform_set_drvdata(dev, info);
 
 	printk(KERN_INFO "fb%d: %s frame buffer device\n",
-	       fb_info.node, fb_info.fix.id);
+	       info->node, info->fix.id);
+
 	return 0;
+
+err:
+	fb_dealloc_cmap(&info->cmap);
+err_fb:
+	framebuffer_release(info);
+	return ret;
 }
 
 static int __exit hitfb_remove(struct platform_device *dev)
 {
-	return unregister_framebuffer(&fb_info);
+	struct fb_info *info = platform_get_drvdata(dev);
+
+	unregister_framebuffer(info);
+	fb_dealloc_cmap(&info->cmap);
+	framebuffer_release(info);
+
+	return 0;
 }
 
-#ifdef CONFIG_PM
-static int hitfb_suspend(struct platform_device *dev, pm_message_t state)
+static int hitfb_suspend(struct device *dev)
 {
 	u16 v;
 
@@ -421,7 +441,7 @@ static int hitfb_suspend(struct platform_device *dev, pm_message_t state)
 	return 0;
 }
 
-static int hitfb_resume(struct platform_device *dev)
+static int hitfb_resume(struct device *dev)
 {
 	u16 v;
 
@@ -435,17 +455,19 @@ static int hitfb_resume(struct platform_device *dev)
 
 	return 0;
 }
-#endif
+
+static struct dev_pm_ops hitfb_dev_pm_ops = {
+	.suspend	= hitfb_suspend,
+	.resume		= hitfb_resume,
+};
 
 static struct platform_driver hitfb_driver = {
 	.probe		= hitfb_probe,
 	.remove		= __exit_p(hitfb_remove),
-#ifdef CONFIG_PM
-	.suspend	= hitfb_suspend,
-	.resume		= hitfb_resume,
-#endif
 	.driver		= {
 		.name	= "hitfb",
+		.owner	= THIS_MODULE,
+		.pm	= &hitfb_dev_pm_ops,
 	},
 };
 
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 2e940199fc8..5743ea25e81 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -1090,8 +1090,10 @@ static int encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info)
     	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
 
     	strcpy(fix->id, "I810");
+	mutex_lock(&info->mm_lock);
     	fix->smem_start = par->fb.physical;
     	fix->smem_len = par->fb.size;
+	mutex_unlock(&info->mm_lock);
     	fix->type = FB_TYPE_PACKED_PIXELS;
     	fix->type_aux = 0;
 	fix->xpanstep = 8;
@@ -2058,8 +2060,7 @@ static int __devinit i810fb_init_pci (struct pci_dev *dev,
 
 	fb_var_to_videomode(&mode, &info->var);
 	fb_add_videomode(&mode, &info->modelist);
-	encode_fix(&info->fix, info); 
-	 	    
+
 	i810fb_init_ringbuffer(info);
 	err = register_framebuffer(info);
 
diff --git a/drivers/video/matrox/matroxfb_DAC1064.c b/drivers/video/matrox/matroxfb_DAC1064.c
index 0ce3b0a8979..a74e5da17aa 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.c
+++ b/drivers/video/matrox/matroxfb_DAC1064.c
@@ -454,9 +454,9 @@ static void DAC1064_restore_2(WPMINFO2) {
 	dprintk(KERN_DEBUG "DAC1064regs ");
 	for (i = 0; i < sizeof(MGA1064_DAC_regs); i++) {
 		dprintk("R%02X=%02X ", MGA1064_DAC_regs[i], ACCESS_FBINFO(hw).DACreg[i]);
-		if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... ");
+		if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... ");
 	}
-	dprintk("\n" KERN_DEBUG "DAC1064clk ");
+	dprintk(KERN_DEBUG "DAC1064clk ");
 	for (i = 0; i < 6; i++)
 		dprintk("C%02X=%02X ", i, ACCESS_FBINFO(hw).DACclk[i]);
 	dprintk("\n");
diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/matrox/matroxfb_Ti3026.c
index 13524821e24..4e825112a60 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.c
+++ b/drivers/video/matrox/matroxfb_Ti3026.c
@@ -651,9 +651,9 @@ static void Ti3026_restore(WPMINFO2) {
 	dprintk(KERN_DEBUG "3026DACregs ");
 	for (i = 0; i < 21; i++) {
 		dprintk("R%02X=%02X ", DACseq[i], hw->DACreg[i]);
-		if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... ");
+		if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... ");
 	}
-	dprintk("\n" KERN_DEBUG "DACclk ");
+	dprintk(KERN_DEBUG "DACclk ");
 	for (i = 0; i < 6; i++)
 		dprintk("C%02X=%02X ", i, hw->DACclk[i]);
 	dprintk("\n");
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 8e7a275df50..0c1049b308b 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -724,8 +724,10 @@ static void matroxfb_update_fix(WPMINFO2)
 	struct fb_fix_screeninfo *fix = &ACCESS_FBINFO(fbcon).fix;
 	DBG(__func__)
 
+	mutex_lock(&ACCESS_FBINFO(fbcon).mm_lock);
 	fix->smem_start = ACCESS_FBINFO(video.base) + ACCESS_FBINFO(curr.ydstorg.bytes);
 	fix->smem_len = ACCESS_FBINFO(video.len_usable) - ACCESS_FBINFO(curr.ydstorg.bytes);
+	mutex_unlock(&ACCESS_FBINFO(fbcon).mm_lock);
 }
 
 static int matroxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -1874,7 +1876,6 @@ static int initMatrox2(WPMINFO struct board* b){
 	}
 	matroxfb_init_fix(PMINFO2);
 	ACCESS_FBINFO(fbcon.screen_base) = vaddr_va(ACCESS_FBINFO(video.vbase));
-	matroxfb_update_fix(PMINFO2);
 	/* Normalize values (namely yres_virtual) */
 	matroxfb_check_var(&vesafb_defined, &ACCESS_FBINFO(fbcon));
 	/* And put it into "current" var. Do NOT program hardware yet, or we'll not take over
@@ -2081,6 +2082,7 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm
 	spin_lock_init(&ACCESS_FBINFO(lock.accel));
 	init_rwsem(&ACCESS_FBINFO(crtc2.lock));
 	init_rwsem(&ACCESS_FBINFO(altout.lock));
+	mutex_init(&ACCESS_FBINFO(fbcon).mm_lock);
 	ACCESS_FBINFO(irq_flags) = 0;
 	init_waitqueue_head(&ACCESS_FBINFO(crtc1.vsync.wait));
 	init_waitqueue_head(&ACCESS_FBINFO(crtc2.vsync.wait));
diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/matrox/matroxfb_crtc2.c
index 7ac4c5f6145..ebcb5c6b496 100644
--- a/drivers/video/matrox/matroxfb_crtc2.c
+++ b/drivers/video/matrox/matroxfb_crtc2.c
@@ -289,7 +289,12 @@ static int matroxfb_dh_release(struct fb_info* info, int user) {
 #undef m2info
 }
 
-static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info) {
+/*
+ * This function is called before the register_framebuffer so
+ * no locking is needed.
+ */
+static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info)
+{
 	struct fb_fix_screeninfo *fix = &m2info->fbcon.fix;
 
 	strcpy(fix->id, "MATROX DH");
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index b7af5256e88..054ef29be47 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -669,7 +669,8 @@ static uint32_t bpp_to_pixfmt(int bpp)
 }
 
 static int mx3fb_blank(int blank, struct fb_info *fbi);
-static int mx3fb_map_video_memory(struct fb_info *fbi);
+static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len,
+				  bool lock);
 static int mx3fb_unmap_video_memory(struct fb_info *fbi);
 
 /**
@@ -711,12 +712,7 @@ static void mx3fb_dma_done(void *arg)
 	complete(&mx3_fbi->flip_cmpl);
 }
 
-/**
- * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
- * @fbi:	framebuffer information pointer.
- * @return:	0 on success or negative error code on failure.
- */
-static int mx3fb_set_par(struct fb_info *fbi)
+static int __set_par(struct fb_info *fbi, bool lock)
 {
 	u32 mem_len;
 	struct ipu_di_signal_cfg sig_cfg;
@@ -727,10 +723,6 @@ static int mx3fb_set_par(struct fb_info *fbi)
 	struct idmac_video_param *video = &ichan->params.video;
 	struct scatterlist *sg = mx3_fbi->sg;
 
-	dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
-
-	mutex_lock(&mx3_fbi->mutex);
-
 	/* Total cleanup */
 	if (mx3_fbi->txd)
 		sdc_disable_channel(mx3_fbi);
@@ -742,11 +734,8 @@ static int mx3fb_set_par(struct fb_info *fbi)
 		if (fbi->fix.smem_start)
 			mx3fb_unmap_video_memory(fbi);
 
-		fbi->fix.smem_len = mem_len;
-		if (mx3fb_map_video_memory(fbi) < 0) {
-			mutex_unlock(&mx3_fbi->mutex);
+		if (mx3fb_map_video_memory(fbi, mem_len, lock) < 0)
 			return -ENOMEM;
-		}
 	}
 
 	sg_init_table(&sg[0], 1);
@@ -792,7 +781,6 @@ static int mx3fb_set_par(struct fb_info *fbi)
 				   fbi->var.vsync_len,
 				   fbi->var.lower_margin +
 				   fbi->var.vsync_len, sig_cfg) != 0) {
-			mutex_unlock(&mx3_fbi->mutex);
 			dev_err(fbi->device,
 				"mx3fb: Error initializing panel.\n");
 			return -EINVAL;
@@ -811,9 +799,30 @@ static int mx3fb_set_par(struct fb_info *fbi)
 	if (mx3_fbi->blank == FB_BLANK_UNBLANK)
 		sdc_enable_channel(mx3_fbi);
 
+	return 0;
+}
+
+/**
+ * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
+ * @fbi:	framebuffer information pointer.
+ * @return:	0 on success or negative error code on failure.
+ */
+static int mx3fb_set_par(struct fb_info *fbi)
+{
+	struct mx3fb_info *mx3_fbi = fbi->par;
+	struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+	struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+	int ret;
+
+	dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
+
+	mutex_lock(&mx3_fbi->mutex);
+
+	ret = __set_par(fbi, true);
+
 	mutex_unlock(&mx3_fbi->mutex);
 
-	return 0;
+	return ret;
 }
 
 /**
@@ -967,21 +976,11 @@ static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
 	return ret;
 }
 
-/**
- * mx3fb_blank() - blank the display.
- */
-static int mx3fb_blank(int blank, struct fb_info *fbi)
+static void __blank(int blank, struct fb_info *fbi)
 {
 	struct mx3fb_info *mx3_fbi = fbi->par;
 	struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
 
-	dev_dbg(fbi->device, "%s, blank = %d, base %p, len %u\n", __func__,
-		blank, fbi->screen_base, fbi->fix.smem_len);
-
-	if (mx3_fbi->blank == blank)
-		return 0;
-
-	mutex_lock(&mx3_fbi->mutex);
 	mx3_fbi->blank = blank;
 
 	switch (blank) {
@@ -1000,6 +999,23 @@ static int mx3fb_blank(int blank, struct fb_info *fbi)
 		sdc_set_brightness(mx3fb, mx3fb->backlight_level);
 		break;
 	}
+}
+
+/**
+ * mx3fb_blank() - blank the display.
+ */
+static int mx3fb_blank(int blank, struct fb_info *fbi)
+{
+	struct mx3fb_info *mx3_fbi = fbi->par;
+
+	dev_dbg(fbi->device, "%s, blank = %d, base %p, len %u\n", __func__,
+		blank, fbi->screen_base, fbi->fix.smem_len);
+
+	if (mx3_fbi->blank == blank)
+		return 0;
+
+	mutex_lock(&mx3_fbi->mutex);
+	__blank(blank, fbi);
 	mutex_unlock(&mx3_fbi->mutex);
 
 	return 0;
@@ -1198,6 +1214,8 @@ static int mx3fb_resume(struct platform_device *pdev)
 /**
  * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
  * @fbi:	framebuffer information pointer
+ * @mem_len:	length of mapped memory
+ * @lock:	do not lock during initialisation
  * @return:	Error code indicating success or failure
  *
  * This buffer is remapped into a non-cached, non-buffered, memory region to
@@ -1205,23 +1223,29 @@ static int mx3fb_resume(struct platform_device *pdev)
  * area is remapped, all virtual memory access to the video memory should occur
  * at the new region.
  */
-static int mx3fb_map_video_memory(struct fb_info *fbi)
+static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len,
+				  bool lock)
 {
 	int retval = 0;
 	dma_addr_t addr;
 
 	fbi->screen_base = dma_alloc_writecombine(fbi->device,
-						  fbi->fix.smem_len,
+						  mem_len,
 						  &addr, GFP_DMA);
 
 	if (!fbi->screen_base) {
 		dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
-			fbi->fix.smem_len);
+			mem_len);
 		retval = -EBUSY;
 		goto err0;
 	}
 
+	if (lock)
+		mutex_lock(&fbi->mm_lock);
 	fbi->fix.smem_start = addr;
+	fbi->fix.smem_len = mem_len;
+	if (lock)
+		mutex_unlock(&fbi->mm_lock);
 
 	dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
 		(uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
@@ -1251,8 +1275,10 @@ static int mx3fb_unmap_video_memory(struct fb_info *fbi)
 			      fbi->screen_base, fbi->fix.smem_start);
 
 	fbi->screen_base = 0;
+	mutex_lock(&fbi->mm_lock);
 	fbi->fix.smem_start = 0;
 	fbi->fix.smem_len = 0;
+	mutex_unlock(&fbi->mm_lock);
 	return 0;
 }
 
@@ -1360,11 +1386,11 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 	init_completion(&mx3fbi->flip_cmpl);
 	disable_irq(ichan->eof_irq);
 	dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
-	ret = mx3fb_set_par(fbi);
+	ret = __set_par(fbi, false);
 	if (ret < 0)
 		goto esetpar;
 
-	mx3fb_blank(FB_BLANK_UNBLANK, fbi);
+	__blank(FB_BLANK_UNBLANK, fbi);
 
 	dev_info(dev, "registered, using mode %s\n", fb_mode);
 
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 060d72fe57c..8862233d57b 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -393,8 +393,10 @@ static void set_fb_fix(struct fb_info *fbi)
 
 	rg = &plane->fbdev->mem_desc.region[plane->idx];
 	fbi->screen_base	= rg->vaddr;
+	mutex_lock(&fbi->mm_lock);
 	fix->smem_start		= rg->paddr;
 	fix->smem_len		= rg->size;
+	mutex_unlock(&fbi->mm_lock);
 
 	fix->type = FB_TYPE_PACKED_PIXELS;
 	bpp = var->bits_per_pixel;
@@ -886,8 +888,10 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 				 * plane memory is dealloce'd, the other
 				 * screen parameters in var / fix are invalid.
 				 */
+				mutex_lock(&fbi->mm_lock);
 				fbi->fix.smem_start = 0;
 				fbi->fix.smem_len = 0;
+				mutex_unlock(&fbi->mm_lock);
 			}
 		}
 	}
@@ -1250,7 +1254,7 @@ static struct fb_ops omapfb_ops = {
 static ssize_t omapfb_show_caps_num(struct device *dev,
 				    struct device_attribute *attr, char *buf)
 {
-	struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+	struct omapfb_device *fbdev = dev_get_drvdata(dev);
 	int plane;
 	size_t size;
 	struct omapfb_caps caps;
@@ -1270,7 +1274,7 @@ static ssize_t omapfb_show_caps_num(struct device *dev,
 static ssize_t omapfb_show_caps_text(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
-	struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+	struct omapfb_device *fbdev = dev_get_drvdata(dev);
 	int i;
 	struct omapfb_caps caps;
 	int plane;
@@ -1317,7 +1321,7 @@ static DEVICE_ATTR(caps_text, 0444, omapfb_show_caps_text, NULL);
 static ssize_t omapfb_show_panel_name(struct device *dev,
 				      struct device_attribute *attr, char *buf)
 {
-	struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+	struct omapfb_device *fbdev = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "%s\n", fbdev->panel->name);
 }
@@ -1326,7 +1330,7 @@ static ssize_t omapfb_show_bklight_level(struct device *dev,
 					 struct device_attribute *attr,
 					 char *buf)
 {
-	struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+	struct omapfb_device *fbdev = dev_get_drvdata(dev);
 	int r;
 
 	if (fbdev->panel->get_bklight_level) {
@@ -1341,7 +1345,7 @@ static ssize_t omapfb_store_bklight_level(struct device *dev,
 					  struct device_attribute *attr,
 					  const char *buf, size_t size)
 {
-	struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+	struct omapfb_device *fbdev = dev_get_drvdata(dev);
 	int r;
 
 	if (fbdev->panel->set_bklight_level) {
@@ -1360,7 +1364,7 @@ static ssize_t omapfb_store_bklight_level(struct device *dev,
 static ssize_t omapfb_show_bklight_max(struct device *dev,
 				       struct device_attribute *attr, char *buf)
 {
-	struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+	struct omapfb_device *fbdev = dev_get_drvdata(dev);
 	int r;
 
 	if (fbdev->panel->get_bklight_level) {
@@ -1393,7 +1397,7 @@ static struct attribute_group panel_attr_grp = {
 static ssize_t omapfb_show_ctrl_name(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
-	struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+	struct omapfb_device *fbdev = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "%s\n", fbdev->ctrl->name);
 }
diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c
index 03b3670130a..bacfabd9ce1 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/platinumfb.c
@@ -141,7 +141,9 @@ static int platinumfb_set_par (struct fb_info *info)
   		offset = 0x10;
 
 	info->screen_base = pinfo->frame_buffer + init->fb_offset + offset;
+	mutex_lock(&info->mm_lock);
 	info->fix.smem_start = (pinfo->frame_buffer_phys) + init->fb_offset + offset;
+	mutex_unlock(&info->mm_lock);
 	info->fix.visual = (pinfo->cmode == CMODE_8) ?
 		FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
  	info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode)
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 0889d50c328..6506117c134 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -815,8 +815,10 @@ static int overlayfb_map_video_memory(struct pxafb_layer *ofb)
 	ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
 	ofb->video_mem_size = size;
 
+	mutex_lock(&ofb->fb.mm_lock);
 	ofb->fb.fix.smem_start	= ofb->video_mem_phys;
 	ofb->fb.fix.smem_len	= ofb->fb.fix.line_length * var->yres_virtual;
+	mutex_unlock(&ofb->fb.mm_lock);
 	ofb->fb.screen_base	= ofb->video_mem;
 	return 0;
 }
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 43680e54542..5a72083dc67 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -211,23 +211,21 @@ static int s3c_fb_check_var(struct fb_var_screeninfo *var,
 
 /**
  * s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock.
+ * @id: window id.
  * @sfb: The hardware state.
  * @pixclock: The pixel clock wanted, in picoseconds.
  *
  * Given the specified pixel clock, work out the necessary divider to get
  * close to the output frequency.
  */
-static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
+static int s3c_fb_calc_pixclk(unsigned char id, struct s3c_fb *sfb, unsigned int pixclk)
 {
+	struct s3c_fb_pd_win *win = sfb->pdata->win[id];
 	unsigned long clk = clk_get_rate(sfb->bus_clk);
-	unsigned long long tmp;
 	unsigned int result;
 
-	tmp = (unsigned long long)clk;
-	tmp *= pixclk;
-
-	do_div(tmp, 1000000000UL);
-	result = (unsigned int)tmp / 1000;
+	pixclk *= win->win_mode.refresh;
+	result = clk / pixclk;
 
 	dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
 		pixclk, clk, result, clk / result);
@@ -267,6 +265,7 @@ static int s3c_fb_set_par(struct fb_info *info)
 	struct s3c_fb *sfb = win->parent;
 	void __iomem *regs = sfb->regs;
 	int win_no = win->index;
+	u32 osdc_data = 0;
 	u32 data;
 	u32 pagewidth;
 	int clkdiv;
@@ -302,7 +301,7 @@ static int s3c_fb_set_par(struct fb_info *info)
 	/* use window 0 as the basis for the lcd output timings */
 
 	if (win_no == 0) {
-		clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock);
+		clkdiv = s3c_fb_calc_pixclk(win_no, sfb, var->pixclock);
 
 		data = sfb->pdata->vidcon0;
 		data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
@@ -359,8 +358,6 @@ static int s3c_fb_set_par(struct fb_info *info)
 
 	data = var->xres * var->yres;
 
-	u32 osdc_data = 0;
-
 	osdc_data = VIDISD14C_ALPHA1_R(0xf) |
 		VIDISD14C_ALPHA1_G(0xf) |
 		VIDISD14C_ALPHA1_B(0xf);
@@ -967,7 +964,7 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev)
 	struct s3c_fb *sfb = platform_get_drvdata(pdev);
 	int win;
 
-	for (win = 0; win <= S3C_FB_MAX_WIN; win++)
+	for (win = 0; win < S3C_FB_MAX_WIN; win++)
 		if (sfb->windows[win])
 			s3c_fb_release_win(sfb, sfb->windows[win]);
 
@@ -991,7 +988,7 @@ static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state)
 	struct s3c_fb_win *win;
 	int win_no;
 
-	for (win_no = S3C_FB_MAX_WIN; win_no >= 0; win_no--) {
+	for (win_no = S3C_FB_MAX_WIN - 1; win_no >= 0; win_no--) {
 		win = sfb->windows[win_no];
 		if (!win)
 			continue;
diff --git a/drivers/video/sh7760fb.c b/drivers/video/sh7760fb.c
index 653bdfee305..9f6d6e61f0c 100644
--- a/drivers/video/sh7760fb.c
+++ b/drivers/video/sh7760fb.c
@@ -120,18 +120,6 @@ static int sh7760_setcolreg (u_int regno,
 	return 0;
 }
 
-static void encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info,
-		       unsigned long stride)
-{
-	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
-	strcpy(fix->id, "sh7760-lcdc");
-
-	fix->smem_start = (unsigned long)info->screen_base;
-	fix->smem_len = info->screen_size;
-
-	fix->line_length = stride;
-}
-
 static int sh7760fb_get_color_info(struct device *dev,
 				   u16 lddfr, int *bpp, int *gray)
 {
@@ -334,7 +322,8 @@ static int sh7760fb_set_par(struct fb_info *info)
 
 	iowrite32(ldsarl, par->base + LDSARL);	/* mem for lower half of DSTN */
 
-	encode_fix(&info->fix, info, stride);
+	info->fix.line_length = stride;
+
 	sh7760fb_check_var(&info->var, info);
 
 	sh7760fb_blank(FB_BLANK_UNBLANK, info);	/* panel on! */
@@ -435,6 +424,8 @@ static int sh7760fb_alloc_mem(struct fb_info *info)
 
 	info->screen_base = fbmem;
 	info->screen_size = vram;
+	info->fix.smem_start = (unsigned long)info->screen_base;
+	info->fix.smem_len = info->screen_size;
 
 	return 0;
 }
@@ -520,6 +511,8 @@ static int __devinit sh7760fb_probe(struct platform_device *pdev)
 	info->var.transp.length = 0;
 	info->var.transp.msb_right = 0;
 
+	strcpy(info->fix.id, "sh7760-lcdc");
+
 	/* set the DON2 bit now, before cmap allocation, as it will randomize
 	 * palette memory.
 	 */
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index f10d2fbeda0..07f22b62563 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
+#include <linux/vmalloc.h>
 #include <video/sh_mobile_lcdc.h>
 #include <asm/atomic.h>
 
@@ -30,9 +31,10 @@ struct sh_mobile_lcdc_chan {
 	unsigned long enabled; /* ME and SE in LDCNT2R */
 	struct sh_mobile_lcdc_chan_cfg cfg;
 	u32 pseudo_palette[PALETTE_NR];
-	struct fb_info info;
+	struct fb_info *info;
 	dma_addr_t dma_handle;
 	struct fb_deferred_io defio;
+	struct scatterlist *sglist;
 	unsigned long frame_end;
 	wait_queue_head_t frame_end_wait;
 };
@@ -206,16 +208,38 @@ static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv) {}
 static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv) {}
 #endif
 
+static int sh_mobile_lcdc_sginit(struct fb_info *info,
+				  struct list_head *pagelist)
+{
+	struct sh_mobile_lcdc_chan *ch = info->par;
+	unsigned int nr_pages_max = info->fix.smem_len >> PAGE_SHIFT;
+	struct page *page;
+	int nr_pages = 0;
+
+	sg_init_table(ch->sglist, nr_pages_max);
+
+	list_for_each_entry(page, pagelist, lru)
+		sg_set_page(&ch->sglist[nr_pages++], page, PAGE_SIZE, 0);
+
+	return nr_pages;
+}
+
 static void sh_mobile_lcdc_deferred_io(struct fb_info *info,
 				       struct list_head *pagelist)
 {
 	struct sh_mobile_lcdc_chan *ch = info->par;
+	unsigned int nr_pages;
 
 	/* enable clocks before accessing hardware */
 	sh_mobile_lcdc_clk_on(ch->lcdc);
 
+	nr_pages = sh_mobile_lcdc_sginit(info, pagelist);
+	dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
+
 	/* trigger panel update */
 	lcdc_write_chan(ch, LDSM2R, 1);
+
+	dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
 }
 
 static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info)
@@ -418,22 +442,22 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		/* set bpp format in PKF[4:0] */
 		tmp = lcdc_read_chan(ch, LDDFR);
 		tmp &= ~(0x0001001f);
-		tmp |= (priv->ch[k].info.var.bits_per_pixel == 16) ? 3 : 0;
+		tmp |= (ch->info->var.bits_per_pixel == 16) ? 3 : 0;
 		lcdc_write_chan(ch, LDDFR, tmp);
 
 		/* point out our frame buffer */
-		lcdc_write_chan(ch, LDSA1R, ch->info.fix.smem_start);
+		lcdc_write_chan(ch, LDSA1R, ch->info->fix.smem_start);
 
 		/* set line size */
-		lcdc_write_chan(ch, LDMLSR, ch->info.fix.line_length);
+		lcdc_write_chan(ch, LDMLSR, ch->info->fix.line_length);
 
 		/* setup deferred io if SYS bus */
 		tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
 		if (ch->ldmt1r_value & (1 << 12) && tmp) {
 			ch->defio.deferred_io = sh_mobile_lcdc_deferred_io;
 			ch->defio.delay = msecs_to_jiffies(tmp);
-			ch->info.fbdefio = &ch->defio;
-			fb_deferred_io_init(&ch->info);
+			ch->info->fbdefio = &ch->defio;
+			fb_deferred_io_init(ch->info);
 
 			/* one-shot mode */
 			lcdc_write_chan(ch, LDSM1R, 1);
@@ -457,6 +481,9 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 	/* tell the board code to enable the panel */
 	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
 		ch = &priv->ch[k];
+		if (!ch->enabled)
+			continue;
+
 		board_cfg = &ch->cfg.board_cfg;
 		if (board_cfg->display_on)
 			board_cfg->display_on(board_cfg->board_data);
@@ -474,17 +501,19 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
 	/* clean up deferred io and ask board code to disable panel */
 	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
 		ch = &priv->ch[k];
+		if (!ch->enabled)
+			continue;
 
 		/* deferred io mode:
 		 * flush frame, and wait for frame end interrupt
 		 * clean up deferred io and enable clock
 		 */
-		if (ch->info.fbdefio) {
+		if (ch->info->fbdefio) {
 			ch->frame_end = 0;
-			schedule_delayed_work(&ch->info.deferred_work, 0);
+			schedule_delayed_work(&ch->info->deferred_work, 0);
 			wait_event(ch->frame_end_wait, ch->frame_end);
-			fb_deferred_io_cleanup(&ch->info);
-			ch->info.fbdefio = NULL;
+			fb_deferred_io_cleanup(ch->info);
+			ch->info->fbdefio = NULL;
 			sh_mobile_lcdc_clk_on(priv);
 		}
 
@@ -793,9 +822,16 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 	priv->base = ioremap_nocache(res->start, (res->end - res->start) + 1);
 
 	for (i = 0; i < j; i++) {
-		info = &priv->ch[i].info;
 		cfg = &priv->ch[i].cfg;
 
+		priv->ch[i].info = framebuffer_alloc(0, &pdev->dev);
+		if (!priv->ch[i].info) {
+			dev_err(&pdev->dev, "unable to allocate fb_info\n");
+			error = -ENOMEM;
+			break;
+		}
+
+		info = priv->ch[i].info;
 		info->fbops = &sh_mobile_lcdc_ops;
 		info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
 		info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres;
@@ -846,21 +882,31 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 	}
 
 	for (i = 0; i < j; i++) {
-		error = register_framebuffer(&priv->ch[i].info);
+		struct sh_mobile_lcdc_chan *ch = priv->ch + i;
+
+		info = ch->info;
+
+		if (info->fbdefio) {
+			priv->ch->sglist = vmalloc(sizeof(struct scatterlist) *
+					info->fix.smem_len >> PAGE_SHIFT);
+			if (!priv->ch->sglist) {
+				dev_err(&pdev->dev, "cannot allocate sglist\n");
+				goto err1;
+			}
+		}
+
+		error = register_framebuffer(info);
 		if (error < 0)
 			goto err1;
-	}
 
-	for (i = 0; i < j; i++) {
-		info = &priv->ch[i].info;
 		dev_info(info->dev,
 			 "registered %s/%s as %dx%d %dbpp.\n",
 			 pdev->name,
-			 (priv->ch[i].cfg.chan == LCDC_CHAN_MAINLCD) ?
+			 (ch->cfg.chan == LCDC_CHAN_MAINLCD) ?
 			 "mainlcd" : "sublcd",
-			 (int) priv->ch[i].cfg.lcd_cfg.xres,
-			 (int) priv->ch[i].cfg.lcd_cfg.yres,
-			 priv->ch[i].cfg.bpp);
+			 (int) ch->cfg.lcd_cfg.xres,
+			 (int) ch->cfg.lcd_cfg.yres,
+			 ch->cfg.bpp);
 
 		/* deferred io mode: disable clock to save power */
 		if (info->fbdefio)
@@ -881,20 +927,24 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(priv->ch); i++)
-		if (priv->ch[i].info.dev)
-			unregister_framebuffer(&priv->ch[i].info);
+		if (priv->ch[i].info->dev)
+			unregister_framebuffer(priv->ch[i].info);
 
 	sh_mobile_lcdc_stop(priv);
 
 	for (i = 0; i < ARRAY_SIZE(priv->ch); i++) {
-		info = &priv->ch[i].info;
+		info = priv->ch[i].info;
 
-		if (!info->device)
+		if (!info || !info->device)
 			continue;
 
+		if (priv->ch[i].sglist)
+			vfree(priv->ch[i].sglist);
+
 		dma_free_coherent(&pdev->dev, info->fix.smem_len,
 				  info->screen_base, priv->ch[i].dma_handle);
 		fb_dealloc_cmap(&info->cmap);
+		framebuffer_release(info);
 	}
 
 #ifdef CONFIG_HAVE_CLK
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 7072d19080d..4a067f0d0ce 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -1847,8 +1847,10 @@ sisfb_get_fix(struct fb_fix_screeninfo *fix, int con, struct fb_info *info)
 
 	strcpy(fix->id, ivideo->myid);
 
+	mutex_lock(&info->mm_lock);
 	fix->smem_start  = ivideo->video_base + ivideo->video_offset;
 	fix->smem_len    = ivideo->sisfb_mem;
+	mutex_unlock(&info->mm_lock);
 	fix->type        = FB_TYPE_PACKED_PIXELS;
 	fix->type_aux    = 0;
 	fix->visual      = (ivideo->video_bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
@@ -6365,7 +6367,6 @@ error_3:	vfree(ivideo->bios_abase);
 		sis_fb_info->fix = ivideo->sisfb_fix;
 		sis_fb_info->screen_base = ivideo->video_vbase + ivideo->video_offset;
 		sis_fb_info->fbops = &sisfb_ops;
-		sisfb_get_fix(&sis_fb_info->fix, -1, sis_fb_info);
 		sis_fb_info->pseudo_palette = ivideo->pseudo_palette;
 
 		fb_alloc_cmap(&sis_fb_info->cmap, 256 , 0);
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index eb5d73a0670..924d7946278 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -145,7 +145,7 @@ static inline void sm501fb_sync_regs(struct sm501fb_info *info)
 #define SM501_MEMF_ACCEL		(8)
 
 static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
-			   unsigned int why, size_t size)
+			   unsigned int why, size_t size, u32 smem_len)
 {
 	struct sm501fb_par *par;
 	struct fb_info *fbi;
@@ -172,7 +172,7 @@ static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
 		if (ptr > 0)
 			ptr &= ~(PAGE_SIZE - 1);
 
-		if (fbi && ptr < fbi->fix.smem_len)
+		if (fbi && ptr < smem_len)
 			return -ENOMEM;
 
 		break;
@@ -197,7 +197,7 @@ static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
 
 	case SM501_MEMF_ACCEL:
 		fbi = inf->fb[HEAD_CRT];
-		ptr = fbi ? fbi->fix.smem_len : 0;
+		ptr = fbi ? smem_len : 0;
 
 		fbi = inf->fb[HEAD_PANEL];
 		if (fbi) {
@@ -413,6 +413,7 @@ static int sm501fb_set_par_common(struct fb_info *info,
 	unsigned int mem_type;
 	unsigned int clock_type;
 	unsigned int head_addr;
+	unsigned int smem_len;
 
 	dev_dbg(fbi->dev, "%s: %dx%d, bpp = %d, virtual %dx%d\n",
 		__func__, var->xres, var->yres, var->bits_per_pixel,
@@ -453,18 +454,20 @@ static int sm501fb_set_par_common(struct fb_info *info,
 
 	/* allocate fb memory within 501 */
 	info->fix.line_length = (var->xres_virtual * var->bits_per_pixel)/8;
-	info->fix.smem_len    = info->fix.line_length * var->yres_virtual;
+	smem_len = info->fix.line_length * var->yres_virtual;
 
 	dev_dbg(fbi->dev, "%s: line length = %u\n", __func__,
 		info->fix.line_length);
 
-	if (sm501_alloc_mem(fbi, &par->screen, mem_type,
-			    info->fix.smem_len)) {
+	if (sm501_alloc_mem(fbi, &par->screen, mem_type, smem_len, smem_len)) {
 		dev_err(fbi->dev, "no memory available\n");
 		return -ENOMEM;
 	}
 
+	mutex_lock(&info->mm_lock);
 	info->fix.smem_start = fbi->fbmem_res->start + par->screen.sm_addr;
+	info->fix.smem_len   = smem_len;
+	mutex_unlock(&info->mm_lock);
 
 	info->screen_base = fbi->fbmem + par->screen.sm_addr;
 	info->screen_size = info->fix.smem_len;
@@ -637,7 +640,8 @@ static int sm501fb_set_par_crt(struct fb_info *info)
 	if ((control & SM501_DC_CRT_CONTROL_SEL) == 0) {
 		/* the head is displaying panel data... */
 
-		sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0);
+		sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0,
+				info->fix.smem_len);
 		goto out_update;
 	}
 
@@ -1289,7 +1293,8 @@ static int sm501_init_cursor(struct fb_info *fbi, unsigned int reg_base)
 
 	par->cursor_regs = info->regs + reg_base;
 
-	ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024);
+	ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024,
+			      fbi->fix.smem_len);
 	if (ret < 0)
 		return ret;
 
@@ -1535,9 +1540,6 @@ static int sm501fb_init_fb(struct fb_info *fb,
 	if (ret)
 		dev_err(info->dev, "check_var() failed on initial setup?\n");
 
-	/* ensure we've activated our new configuration */
-	(fb->fbops->fb_set_par)(fb);
-
 	return 0;
 }
 
@@ -1619,6 +1621,8 @@ static int __devinit sm501fb_start_one(struct sm501fb_info *info,
 	if (!fbi)
 		return 0;
 
+	mutex_init(&info->fb[head]->mm_lock);
+
 	ret = sm501fb_init_fb(info->fb[head], head, drvname);
 	if (ret) {
 		dev_err(info->dev, "cannot initialise fb %s\n", drvname);
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index eec9dcb7f59..6120f0c526f 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -1115,10 +1115,9 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
 		  if the device name contains the string "DX" and tell the
 		  user how to reconfigure the card. */
 		if (strstr(sti->outptr.dev_name, "DX")) {
-		   printk(KERN_WARNING "WARNING: stifb framebuffer driver does not "
-			"support '%s' in double-buffer mode.\n"
-			KERN_WARNING "WARNING: Please disable the double-buffer mode "
-			"in IPL menu (the PARISC-BIOS).\n",
+		   printk(KERN_WARNING
+"WARNING: stifb framebuffer driver does not support '%s' in double-buffer mode.\n"
+"WARNING: Please disable the double-buffer mode in IPL menu (the PARISC-BIOS).\n",
 			sti->outptr.dev_name);
 		   goto out_err0;
 		}
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index fcd53ceb88f..c8960003f47 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -2407,14 +2407,14 @@ int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
 			viafb_dvi_set_mode(viafb_get_mode_index
 				     (viaparinfo->tmds_setting_info->h_active,
 				      viaparinfo->tmds_setting_info->
-				      v_active, 1),
+				      v_active),
 				     video_bpp1, viaparinfo->
 				     tmds_setting_info->iga_path);
 		} else {
 			viafb_dvi_set_mode(viafb_get_mode_index
 				     (viaparinfo->tmds_setting_info->h_active,
 				      viaparinfo->
-				      tmds_setting_info->v_active, 0),
+				      tmds_setting_info->v_active),
 				     video_bpp, viaparinfo->
 				     tmds_setting_info->iga_path);
 		}
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 6c7290a6a44..78c6b338794 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -580,10 +580,7 @@ static void load_lcd_k400_patch_tbl(int set_hres, int set_vres,
 	int reg_num = 0;
 	struct io_reg *lcd_patch_reg = NULL;
 
-	if (viaparinfo->lvds_setting_info->iga_path == IGA2)
-		vmode_index = viafb_get_mode_index(set_hres, set_vres, 1);
-	else
-		vmode_index = viafb_get_mode_index(set_hres, set_vres, 0);
+	vmode_index = viafb_get_mode_index(set_hres, set_vres);
 	switch (panel_id) {
 		/* LCD 800x600 */
 	case LCD_PANEL_ID1_800X600:
@@ -761,10 +758,7 @@ static void load_lcd_p880_patch_tbl(int set_hres, int set_vres,
 	int reg_num = 0;
 	struct io_reg *lcd_patch_reg = NULL;
 
-	if (viaparinfo->lvds_setting_info->iga_path == IGA2)
-		vmode_index = viafb_get_mode_index(set_hres, set_vres, 1);
-	else
-		vmode_index = viafb_get_mode_index(set_hres, set_vres, 0);
+	vmode_index = viafb_get_mode_index(set_hres, set_vres);
 
 	switch (panel_id) {
 	case LCD_PANEL_ID5_1400X1050:
@@ -832,10 +826,7 @@ static void load_lcd_patch_regs(int set_hres, int set_vres,
 {
 	int vmode_index;
 
-	if (viaparinfo->lvds_setting_info->iga_path == IGA2)
-		vmode_index = viafb_get_mode_index(set_hres, set_vres, 1);
-	else
-		vmode_index = viafb_get_mode_index(set_hres, set_vres, 0);
+	vmode_index = viafb_get_mode_index(set_hres, set_vres);
 
 	viafb_unlock_crt();
 
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index a0fec298216..72833f3334b 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -32,7 +32,6 @@ static u32 pseudo_pal[17];
 /* video mode */
 static char *viafb_mode = "640x480";
 static char *viafb_mode1 = "640x480";
-static int viafb_resMode = VIA_RES_640X480;
 
 /* Added for specifying active devices.*/
 char *viafb_active_dev = "";
@@ -56,47 +55,47 @@ static void viafb_get_video_device(u32 *video_dev_info);
 
 /* Mode information */
 static const struct viafb_modeinfo viafb_modentry[] = {
-	{480, 640, VIA_RES_480X640, "480x640"},
-	{640, 480, VIA_RES_640X480, "640x480"},
-	{800, 480, VIA_RES_800X480, "800x480"},
-	{800, 600, VIA_RES_800X600, "800x600"},
-	{1024, 768, VIA_RES_1024X768, "1024x768"},
-	{1152, 864, VIA_RES_1152X864, "1152x864"},
-	{1280, 1024, VIA_RES_1280X1024, "1280x1024"},
-	{1600, 1200, VIA_RES_1600X1200, "1600x1200"},
-	{1440, 1050, VIA_RES_1440X1050, "1440x1050"},
-	{1280, 768, VIA_RES_1280X768, "1280x768"},
-	{1280, 800, VIA_RES_1280X800, "1280x800"},
-	{1280, 960, VIA_RES_1280X960, "1280x960"},
-	{1920, 1440, VIA_RES_1920X1440, "1920x1440"},
-	{848, 480, VIA_RES_848X480, "848x480"},
-	{1400, 1050, VIA_RES_1400X1050, "1400x1050"},
-	{720, 480, VIA_RES_720X480, "720x480"},
-	{720, 576, VIA_RES_720X576, "720x576"},
-	{1024, 512, VIA_RES_1024X512, "1024x512"},
-	{1024, 576, VIA_RES_1024X576, "1024x576"},
-	{1024, 600, VIA_RES_1024X600, "1024x600"},
-	{1280, 720, VIA_RES_1280X720, "1280x720"},
-	{1920, 1080, VIA_RES_1920X1080, "1920x1080"},
-	{1366, 768, VIA_RES_1368X768, "1368x768"},
-	{1680, 1050, VIA_RES_1680X1050, "1680x1050"},
-	{960, 600, VIA_RES_960X600, "960x600"},
-	{1000, 600, VIA_RES_1000X600, "1000x600"},
-	{1024, 576, VIA_RES_1024X576, "1024x576"},
-	{1024, 600, VIA_RES_1024X600, "1024x600"},
-	{1088, 612, VIA_RES_1088X612, "1088x612"},
-	{1152, 720, VIA_RES_1152X720, "1152x720"},
-	{1200, 720, VIA_RES_1200X720, "1200x720"},
-	{1280, 600, VIA_RES_1280X600, "1280x600"},
-	{1360, 768, VIA_RES_1360X768, "1360x768"},
-	{1440, 900, VIA_RES_1440X900, "1440x900"},
-	{1600, 900, VIA_RES_1600X900, "1600x900"},
-	{1600, 1024, VIA_RES_1600X1024, "1600x1024"},
-	{1792, 1344, VIA_RES_1792X1344, "1792x1344"},
-	{1856, 1392, VIA_RES_1856X1392, "1856x1392"},
-	{1920, 1200, VIA_RES_1920X1200, "1920x1200"},
-	{2048, 1536, VIA_RES_2048X1536, "2048x1536"},
-	{0, 0, VIA_RES_INVALID, "640x480"}
+	{480, 640, VIA_RES_480X640},
+	{640, 480, VIA_RES_640X480},
+	{800, 480, VIA_RES_800X480},
+	{800, 600, VIA_RES_800X600},
+	{1024, 768, VIA_RES_1024X768},
+	{1152, 864, VIA_RES_1152X864},
+	{1280, 1024, VIA_RES_1280X1024},
+	{1600, 1200, VIA_RES_1600X1200},
+	{1440, 1050, VIA_RES_1440X1050},
+	{1280, 768, VIA_RES_1280X768,},
+	{1280, 800, VIA_RES_1280X800},
+	{1280, 960, VIA_RES_1280X960},
+	{1920, 1440, VIA_RES_1920X1440},
+	{848, 480, VIA_RES_848X480},
+	{1400, 1050, VIA_RES_1400X1050},
+	{720, 480, VIA_RES_720X480},
+	{720, 576, VIA_RES_720X576},
+	{1024, 512, VIA_RES_1024X512},
+	{1024, 576, VIA_RES_1024X576},
+	{1024, 600, VIA_RES_1024X600},
+	{1280, 720, VIA_RES_1280X720},
+	{1920, 1080, VIA_RES_1920X1080},
+	{1366, 768, VIA_RES_1368X768},
+	{1680, 1050, VIA_RES_1680X1050},
+	{960, 600, VIA_RES_960X600},
+	{1000, 600, VIA_RES_1000X600},
+	{1024, 576, VIA_RES_1024X576},
+	{1024, 600, VIA_RES_1024X600},
+	{1088, 612, VIA_RES_1088X612},
+	{1152, 720, VIA_RES_1152X720},
+	{1200, 720, VIA_RES_1200X720},
+	{1280, 600, VIA_RES_1280X600},
+	{1360, 768, VIA_RES_1360X768},
+	{1440, 900, VIA_RES_1440X900},
+	{1600, 900, VIA_RES_1600X900},
+	{1600, 1024, VIA_RES_1600X1024},
+	{1792, 1344, VIA_RES_1792X1344},
+	{1856, 1392, VIA_RES_1856X1392},
+	{1920, 1200, VIA_RES_1920X1200},
+	{2048, 1536, VIA_RES_2048X1536},
+	{0, 0, VIA_RES_INVALID}
 };
 
 static struct fb_ops viafb_ops;
@@ -177,7 +176,7 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
 	if (var->vmode & FB_VMODE_INTERLACED || var->vmode & FB_VMODE_DOUBLE)
 		return -EINVAL;
 
-	vmode_index = viafb_get_mode_index(var->xres, var->yres, 0);
+	vmode_index = viafb_get_mode_index(var->xres, var->yres);
 	if (vmode_index == VIA_RES_INVALID) {
 		DEBUG_MSG(KERN_INFO
 			  "viafb: Mode %dx%dx%d not supported!!\n",
@@ -233,14 +232,14 @@ static int viafb_set_par(struct fb_info *info)
 	viafb_update_device_setting(info->var.xres, info->var.yres,
 			      info->var.bits_per_pixel, viafb_refresh, 0);
 
-	vmode_index = viafb_get_mode_index(info->var.xres, info->var.yres, 0);
+	vmode_index = viafb_get_mode_index(info->var.xres, info->var.yres);
 
 	if (viafb_SAMM_ON == 1) {
 		DEBUG_MSG(KERN_INFO
 		"viafb_second_xres = %d, viafb_second_yres = %d, bpp = %d\n",
 			  viafb_second_xres, viafb_second_yres, viafb_bpp1);
 		vmode_index1 = viafb_get_mode_index(viafb_second_xres,
-			viafb_second_yres, 1);
+			viafb_second_yres);
 		DEBUG_MSG(KERN_INFO "->viafb_SAMM_ON: index=%d\n",
 			vmode_index1);
 
@@ -1262,7 +1261,7 @@ static int viafb_sync(struct fb_info *info)
 	return 0;
 }
 
-int viafb_get_mode_index(int hres, int vres, int flag)
+int viafb_get_mode_index(int hres, int vres)
 {
 	u32 i;
 	DEBUG_MSG(KERN_INFO "viafb_get_mode_index!\n");
@@ -1272,13 +1271,7 @@ int viafb_get_mode_index(int hres, int vres, int flag)
 			viafb_modentry[i].yres == vres)
 			break;
 
-	viafb_resMode = viafb_modentry[i].mode_index;
-	if (flag)
-		viafb_mode1 = viafb_modentry[i].mode_res;
-	else
-		viafb_mode = viafb_modentry[i].mode_res;
-
-	return viafb_resMode;
+	return viafb_modentry[i].mode_index;
 }
 
 static void check_available_device_to_enable(int device_id)
@@ -2199,7 +2192,7 @@ static int __devinit via_pci_probe(void)
 	strict_strtoul(tmpc, 0, &default_xres);
 	strict_strtoul(tmpm, 0, &default_yres);
 
-	vmode_index = viafb_get_mode_index(default_xres, default_yres, 0);
+	vmode_index = viafb_get_mode_index(default_xres, default_yres);
 	DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index);
 
 	if (viafb_SAMM_ON == 1) {
diff --git a/drivers/video/via/viafbdev.h b/drivers/video/via/viafbdev.h
index a4158e87287..227b000feb3 100644
--- a/drivers/video/via/viafbdev.h
+++ b/drivers/video/via/viafbdev.h
@@ -81,7 +81,6 @@ struct viafb_modeinfo {
 	u32 xres;
 	u32 yres;
 	int mode_index;
-	char *mode_res;
 };
 extern unsigned int viafb_second_virtual_yres;
 extern unsigned int viafb_second_virtual_xres;
@@ -102,7 +101,7 @@ extern int strict_strtoul(const char *cp, unsigned int base,
 void viafb_memory_pitch_patch(struct fb_info *info);
 void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
 			  int mode_index);
-int viafb_get_mode_index(int hres, int vres, int flag);
+int viafb_get_mode_index(int hres, int vres);
 u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
 	*plvds_setting_info, struct lvds_chip_information
 	*plvds_chip_info, u8 index);
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index d0674f1e3f1..2376f688ec8 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -523,6 +523,7 @@ static int w100fb_set_par(struct fb_info *info)
 		info->fix.ywrapstep = 0;
 		info->fix.line_length = par->xres * BITS_PER_PIXEL / 8;
 
+		mutex_lock(&info->mm_lock);
 		if ((par->xres*par->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)) {
 			par->extmem_active = 1;
 			info->fix.smem_len = par->mach->mem->size+1;
@@ -530,6 +531,7 @@ static int w100fb_set_par(struct fb_info *info)
 			par->extmem_active = 0;
 			info->fix.smem_len = MEM_INT_SIZE+1;
 		}
+		mutex_unlock(&info->mm_lock);
 
 		w100fb_activate_var(par);
 	}
@@ -746,8 +748,6 @@ int __init w100fb_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	w100fb_set_par(info);
-
 	if (register_framebuffer(info) < 0) {
 		err = -EINVAL;
 		goto out;
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index 15502d5e364..54cd9161017 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -454,6 +454,10 @@ static int __devinit xenfb_probe(struct xenbus_device *dev,
 
 	xenfb_init_shared_page(info, fb_info);
 
+	ret = xenfb_connect_backend(dev, info);
+	if (ret < 0)
+		goto error;
+
 	ret = register_framebuffer(fb_info);
 	if (ret) {
 		fb_deferred_io_cleanup(fb_info);
@@ -464,10 +468,6 @@ static int __devinit xenfb_probe(struct xenbus_device *dev,
 	}
 	info->fb_info = fb_info;
 
-	ret = xenfb_connect_backend(dev, info);
-	if (ret < 0)
-		goto error;
-
 	xenfb_make_preferred_console();
 	return 0;
 
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 193c8f0e5cc..248e00ec4dc 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -52,8 +52,10 @@ struct virtio_pci_device
 	char (*msix_names)[256];
 	/* Number of available vectors */
 	unsigned msix_vectors;
-	/* Vectors allocated */
+	/* Vectors allocated, excluding per-vq vectors if any */
 	unsigned msix_used_vectors;
+	/* Whether we have vector per vq */
+	bool per_vq_vectors;
 };
 
 /* Constants for MSI-X */
@@ -258,7 +260,6 @@ static void vp_free_vectors(struct virtio_device *vdev)
 
 	for (i = 0; i < vp_dev->msix_used_vectors; ++i)
 		free_irq(vp_dev->msix_entries[i].vector, vp_dev);
-	vp_dev->msix_used_vectors = 0;
 
 	if (vp_dev->msix_enabled) {
 		/* Disable the vector used for configuration */
@@ -267,80 +268,77 @@ static void vp_free_vectors(struct virtio_device *vdev)
 		/* Flush the write out to device */
 		ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
 
-		vp_dev->msix_enabled = 0;
 		pci_disable_msix(vp_dev->pci_dev);
+		vp_dev->msix_enabled = 0;
+		vp_dev->msix_vectors = 0;
 	}
-}
 
-static int vp_enable_msix(struct pci_dev *dev, struct msix_entry *entries,
-			  int *options, int noptions)
-{
-	int i;
-	for (i = 0; i < noptions; ++i)
-		if (!pci_enable_msix(dev, entries, options[i]))
-			return options[i];
-	return -EBUSY;
+	vp_dev->msix_used_vectors = 0;
+	kfree(vp_dev->msix_names);
+	vp_dev->msix_names = NULL;
+	kfree(vp_dev->msix_entries);
+	vp_dev->msix_entries = NULL;
 }
 
-static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs)
+static int vp_request_vectors(struct virtio_device *vdev, int nvectors,
+			      bool per_vq_vectors)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 	const char *name = dev_name(&vp_dev->vdev.dev);
 	unsigned i, v;
 	int err = -ENOMEM;
-	/* We want at most one vector per queue and one for config changes.
-	 * Fallback to separate vectors for config and a shared for queues.
-	 * Finally fall back to regular interrupts. */
-	int options[] = { max_vqs + 1, 2 };
-	int nvectors = max(options[0], options[1]);
+
+	if (!nvectors) {
+		/* Can't allocate MSI-X vectors, use regular interrupt */
+		vp_dev->msix_vectors = 0;
+		err = request_irq(vp_dev->pci_dev->irq, vp_interrupt,
+				  IRQF_SHARED, name, vp_dev);
+		if (err)
+			return err;
+		vp_dev->intx_enabled = 1;
+		return 0;
+	}
 
 	vp_dev->msix_entries = kmalloc(nvectors * sizeof *vp_dev->msix_entries,
 				       GFP_KERNEL);
 	if (!vp_dev->msix_entries)
-		goto error_entries;
+		goto error;
 	vp_dev->msix_names = kmalloc(nvectors * sizeof *vp_dev->msix_names,
 				     GFP_KERNEL);
 	if (!vp_dev->msix_names)
-		goto error_names;
+		goto error;
 
 	for (i = 0; i < nvectors; ++i)
 		vp_dev->msix_entries[i].entry = i;
 
-	err = vp_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries,
-			     options, ARRAY_SIZE(options));
-	if (err < 0) {
-		/* Can't allocate enough MSI-X vectors, use regular interrupt */
-		vp_dev->msix_vectors = 0;
-		err = request_irq(vp_dev->pci_dev->irq, vp_interrupt,
-				  IRQF_SHARED, name, vp_dev);
-		if (err)
-			goto error_irq;
-		vp_dev->intx_enabled = 1;
-	} else {
-		vp_dev->msix_vectors = err;
-		vp_dev->msix_enabled = 1;
-
-		/* Set the vector used for configuration */
-		v = vp_dev->msix_used_vectors;
-		snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
-			 "%s-config", name);
-		err = request_irq(vp_dev->msix_entries[v].vector,
-				  vp_config_changed, 0, vp_dev->msix_names[v],
-				  vp_dev);
-		if (err)
-			goto error_irq;
-		++vp_dev->msix_used_vectors;
-
-		iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
-		/* Verify we had enough resources to assign the vector */
-		v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
-		if (v == VIRTIO_MSI_NO_VECTOR) {
-			err = -EBUSY;
-			goto error_irq;
-		}
+	err = pci_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries, nvectors);
+	if (err > 0)
+		err = -ENOSPC;
+	if (err)
+		goto error;
+	vp_dev->msix_vectors = nvectors;
+	vp_dev->msix_enabled = 1;
+
+	/* Set the vector used for configuration */
+	v = vp_dev->msix_used_vectors;
+	snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
+		 "%s-config", name);
+	err = request_irq(vp_dev->msix_entries[v].vector,
+			  vp_config_changed, 0, vp_dev->msix_names[v],
+			  vp_dev);
+	if (err)
+		goto error;
+	++vp_dev->msix_used_vectors;
+
+	iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+	/* Verify we had enough resources to assign the vector */
+	v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+	if (v == VIRTIO_MSI_NO_VECTOR) {
+		err = -EBUSY;
+		goto error;
 	}
 
-	if (vp_dev->msix_vectors && vp_dev->msix_vectors != max_vqs + 1) {
+	if (!per_vq_vectors) {
 		/* Shared vector for all VQs */
 		v = vp_dev->msix_used_vectors;
 		snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
@@ -349,28 +347,25 @@ static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs)
 				  vp_vring_interrupt, 0, vp_dev->msix_names[v],
 				  vp_dev);
 		if (err)
-			goto error_irq;
+			goto error;
 		++vp_dev->msix_used_vectors;
 	}
 	return 0;
-error_irq:
+error:
 	vp_free_vectors(vdev);
-	kfree(vp_dev->msix_names);
-error_names:
-	kfree(vp_dev->msix_entries);
-error_entries:
 	return err;
 }
 
 static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 				    void (*callback)(struct virtqueue *vq),
-				    const char *name)
+				    const char *name,
+				    u16 vector)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 	struct virtio_pci_vq_info *info;
 	struct virtqueue *vq;
 	unsigned long flags, size;
-	u16 num, vector;
+	u16 num;
 	int err;
 
 	/* Select the queue we're interested in */
@@ -389,7 +384,7 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 
 	info->queue_index = index;
 	info->num = num;
-	info->vector = VIRTIO_MSI_NO_VECTOR;
+	info->vector = vector;
 
 	size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN));
 	info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO);
@@ -413,22 +408,7 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 	vq->priv = info;
 	info->vq = vq;
 
-	/* allocate per-vq vector if available and necessary */
-	if (callback && vp_dev->msix_used_vectors < vp_dev->msix_vectors) {
-		vector = vp_dev->msix_used_vectors;
-		snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
-			 "%s-%s", dev_name(&vp_dev->vdev.dev), name);
-		err = request_irq(vp_dev->msix_entries[vector].vector,
-				  vring_interrupt, 0,
-				  vp_dev->msix_names[vector], vq);
-		if (err)
-			goto out_request_irq;
-		info->vector = vector;
-		++vp_dev->msix_used_vectors;
-	} else
-		vector = VP_MSIX_VQ_VECTOR;
-
-	 if (callback && vp_dev->msix_enabled) {
+	 if (vector != VIRTIO_MSI_NO_VECTOR) {
 		iowrite16(vector, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
 		vector = ioread16(vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
 		if (vector == VIRTIO_MSI_NO_VECTOR) {
@@ -444,11 +424,6 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 	return vq;
 
 out_assign:
-	if (info->vector != VIRTIO_MSI_NO_VECTOR) {
-		free_irq(vp_dev->msix_entries[info->vector].vector, vq);
-		--vp_dev->msix_used_vectors;
-	}
-out_request_irq:
 	vring_del_virtqueue(vq);
 out_activate_queue:
 	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
@@ -462,12 +437,13 @@ static void vp_del_vq(struct virtqueue *vq)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
 	struct virtio_pci_vq_info *info = vq->priv;
-	unsigned long size;
+	unsigned long flags, size;
 
-	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
+	spin_lock_irqsave(&vp_dev->lock, flags);
+	list_del(&info->node);
+	spin_unlock_irqrestore(&vp_dev->lock, flags);
 
-	if (info->vector != VIRTIO_MSI_NO_VECTOR)
-		free_irq(vp_dev->msix_entries[info->vector].vector, vq);
+	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
 
 	if (vp_dev->msix_enabled) {
 		iowrite16(VIRTIO_MSI_NO_VECTOR,
@@ -489,36 +465,62 @@ static void vp_del_vq(struct virtqueue *vq)
 /* the config->del_vqs() implementation */
 static void vp_del_vqs(struct virtio_device *vdev)
 {
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 	struct virtqueue *vq, *n;
+	struct virtio_pci_vq_info *info;
 
-	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list) {
+		info = vq->priv;
+		if (vp_dev->per_vq_vectors)
+			free_irq(vp_dev->msix_entries[info->vector].vector, vq);
 		vp_del_vq(vq);
+	}
+	vp_dev->per_vq_vectors = false;
 
 	vp_free_vectors(vdev);
 }
 
-/* the config->find_vqs() implementation */
-static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
-		       struct virtqueue *vqs[],
-		       vq_callback_t *callbacks[],
-		       const char *names[])
+static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+			      struct virtqueue *vqs[],
+			      vq_callback_t *callbacks[],
+			      const char *names[],
+			      int nvectors,
+			      bool per_vq_vectors)
 {
-	int vectors = 0;
-	int i, err;
-
-	/* How many vectors would we like? */
-	for (i = 0; i < nvqs; ++i)
-		if (callbacks[i])
-			++vectors;
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	u16 vector;
+	int i, err, allocated_vectors;
 
-	err = vp_request_vectors(vdev, vectors);
+	err = vp_request_vectors(vdev, nvectors, per_vq_vectors);
 	if (err)
 		goto error_request;
 
+	vp_dev->per_vq_vectors = per_vq_vectors;
+	allocated_vectors = vp_dev->msix_used_vectors;
 	for (i = 0; i < nvqs; ++i) {
-		vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i]);
-		if (IS_ERR(vqs[i]))
+		if (!callbacks[i] || !vp_dev->msix_enabled)
+			vector = VIRTIO_MSI_NO_VECTOR;
+		else if (vp_dev->per_vq_vectors)
+			vector = allocated_vectors++;
+		else
+			vector = VP_MSIX_VQ_VECTOR;
+		vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i], vector);
+		if (IS_ERR(vqs[i])) {
+			err = PTR_ERR(vqs[i]);
 			goto error_find;
+		}
+		/* allocate per-vq irq if available and necessary */
+		if (vp_dev->per_vq_vectors && vector != VIRTIO_MSI_NO_VECTOR) {
+			snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
+				 "%s-%s", dev_name(&vp_dev->vdev.dev), names[i]);
+			err = request_irq(vp_dev->msix_entries[vector].vector,
+					  vring_interrupt, 0,
+					  vp_dev->msix_names[vector], vqs[i]);
+			if (err) {
+				vp_del_vq(vqs[i]);
+				goto error_find;
+			}
+		}
 	}
 	return 0;
 
@@ -526,7 +528,37 @@ error_find:
 	vp_del_vqs(vdev);
 
 error_request:
-	return PTR_ERR(vqs[i]);
+	return err;
+}
+
+/* the config->find_vqs() implementation */
+static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+		       struct virtqueue *vqs[],
+		       vq_callback_t *callbacks[],
+		       const char *names[])
+{
+	int vectors = 0;
+	int i, uninitialized_var(err);
+
+	/* How many vectors would we like? */
+	for (i = 0; i < nvqs; ++i)
+		if (callbacks[i])
+			++vectors;
+
+	/* We want at most one vector per queue and one for config changes. */
+	err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+				 vectors + 1, true);
+	if (!err)
+		return 0;
+	/* Fallback to separate vectors for config and a shared for queues. */
+	err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+				 2, false);
+	if (!err)
+		return 0;
+	/* Finally fall back to regular interrupts. */
+	err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+				 0, false);
+	return err;
 }
 
 static struct virtio_config_ops virtio_pci_config_ops = {
@@ -669,7 +701,7 @@ static int __init virtio_pci_init(void)
 
 	err = pci_register_driver(&virtio_pci_driver);
 	if (err)
-		device_unregister(virtio_pci_root);
+		root_device_unregister(virtio_pci_root);
 
 	return err;
 }
diff --git a/drivers/vlynq/Kconfig b/drivers/vlynq/Kconfig
index f6542211db4..a9efb162532 100644
--- a/drivers/vlynq/Kconfig
+++ b/drivers/vlynq/Kconfig
@@ -13,7 +13,7 @@ config VLYNQ
 
 config VLYNQ_DEBUG
 	bool "VLYNQ bus debug"
-	depends on VLYNQ && KERNEL_DEBUG
+	depends on VLYNQ && DEBUG_KERNEL
 	help
 	  Turn on VLYNQ bus debugging.
 
diff --git a/drivers/vlynq/vlynq.c b/drivers/vlynq/vlynq.c
index 7335433b067..f05d2a36836 100644
--- a/drivers/vlynq/vlynq.c
+++ b/drivers/vlynq/vlynq.c
@@ -76,7 +76,7 @@ struct vlynq_regs {
 	u32 int_device[8];
 };
 
-#ifdef VLYNQ_DEBUG
+#ifdef CONFIG_VLYNQ_DEBUG
 static void vlynq_dump_regs(struct vlynq_device *dev)
 {
 	int i;
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index a7e3b706b9d..0d92969404c 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -687,6 +687,7 @@ static int omap_hdq_remove(struct platform_device *pdev)
 
 	if (hdq_data->hdq_usecount) {
 		dev_dbg(&pdev->dev, "removed when use count is not zero\n");
+		mutex_unlock(&hdq_data->hdq_mutex);
 		return -EBUSY;
 	}
 
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
index 3fe9742c23c..2f8643efe92 100644
--- a/drivers/watchdog/ar7_wdt.c
+++ b/drivers/watchdog/ar7_wdt.c
@@ -37,7 +37,7 @@
 #include <linux/uaccess.h>
 
 #include <asm/addrspace.h>
-#include <asm/ar7/ar7.h>
+#include <asm/mach-ar7/ar7.h>
 
 #define DRVNAME "ar7_wdt"
 #define LONGNAME "TI AR7 Watchdog Timer"
diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c
index 5c7011cda6a..751c003864a 100644
--- a/drivers/watchdog/bcm47xx_wdt.c
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -161,7 +161,7 @@ static long bcm47xx_wdt_ioctl(struct file *file,
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	int new_value, retval = -EINVAL;;
+	int new_value, retval = -EINVAL;
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
index fecb307d28e..aec7cefdef2 100644
--- a/drivers/watchdog/coh901327_wdt.c
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -18,6 +18,7 @@
 #include <linux/bitops.h>
 #include <linux/uaccess.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 
 #define DRV_NAME "WDOG COH 901 327"
 
@@ -92,6 +93,8 @@ static struct clk *clk;
 static void coh901327_enable(u16 timeout)
 {
 	u16 val;
+	unsigned long freq;
+	unsigned long delay_ns;
 
 	clk_enable(clk);
 	/* Restart timer if it is disabled */
@@ -102,6 +105,14 @@ static void coh901327_enable(u16 timeout)
 	/* Acknowledge any pending interrupt so it doesn't just fire off */
 	writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
 	       virtbase + U300_WDOG_IER);
+	/*
+	 * The interrupt is cleared in the 32 kHz clock domain.
+	 * Wait 3 32 kHz cycles for it to take effect
+	 */
+	freq = clk_get_rate(clk);
+	delay_ns = (1000000000 + freq - 1) / freq; /* Freq to ns and round up */
+	delay_ns = 3 * delay_ns; /* Wait 3 cycles */
+	ndelay(delay_ns);
 	/* Enable the watchdog interrupt */
 	writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR);
 	/* Activate the watchdog timer */
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
index e9f950ff86e..cdd55e0d09f 100644
--- a/drivers/watchdog/ep93xx_wdt.c
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -29,6 +29,7 @@
 #include <linux/watchdog.h>
 #include <linux/timer.h>
 #include <linux/uaccess.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 
 #define WDT_VERSION	"0.3"
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index 00b03eb43bf..e1c82769b08 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -66,7 +66,7 @@ static inline void ks8695_wdt_stop(void)
 static inline void ks8695_wdt_start(void)
 {
 	unsigned long tmcon;
-	unsigned long tval = wdt_time * CLOCK_TICK_RATE;
+	unsigned long tval = wdt_time * KS8695_CLOCK_RATE;
 
 	spin_lock(&ks8695_lock);
 	/* disable timer0 */
@@ -103,7 +103,7 @@ static inline void ks8695_wdt_reload(void)
 static int ks8695_wdt_settimeout(int new_time)
 {
 	/*
-	 * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz
+	 * All counting occurs at KS8695_CLOCK_RATE / 128 = 0.256 Hz
 	 *
 	 * Since WDV is a 16-bit counter, the maximum period is
 	 * 65536 / 0.256 = 256 seconds.
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index ee1caae4d33..016245419fa 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -38,7 +38,7 @@
 
 static unsigned long oscr_freq;
 static unsigned long sa1100wdt_users;
-static int pre_margin;
+static unsigned int pre_margin;
 static int boot_status;
 
 /*
@@ -84,6 +84,7 @@ static const struct watchdog_info ident = {
 	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT
 				| WDIOF_KEEPALIVEPING,
 	.identity	= "SA1100/PXA255 Watchdog",
+	.firmware_version	= 1,
 };
 
 static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
@@ -118,7 +119,7 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
 		if (ret)
 			break;
 
-		if (time <= 0 || time > 255) {
+		if (time <= 0 || (oscr_freq * (long long)time >= 0xffffffff)) {
 			ret = -EINVAL;
 			break;
 		}
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 916890abffd..f201accc4e3 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -89,6 +89,11 @@ static void w83627hf_select_wd_register(void)
 		c = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */
 		outb_p(0x2b, WDT_EFER);
 		outb_p(c, WDT_EFDR);	/* set GPIO3 to WDT0 */
+	} else if (c == 0x88) {	/* W83627EHF */
+		outb_p(0x2d, WDT_EFER); /* select GPIO5 */
+		c = inb_p(WDT_EFDR) & ~0x01; /* PIN77 -> WDT0# */
+		outb_p(0x2d, WDT_EFER);
+		outb_p(c, WDT_EFDR); /* set GPIO5 to WDT0 */
 	}
 
 	outb_p(0x07, WDT_EFER); /* point to logical device number reg */
diff --git a/drivers/watchdog/w83697ug_wdt.c b/drivers/watchdog/w83697ug_wdt.c
index 883b5f79673..a6c12dec91a 100644
--- a/drivers/watchdog/w83697ug_wdt.c
+++ b/drivers/watchdog/w83697ug_wdt.c
@@ -149,8 +149,10 @@ static void wdt_ctrl(int timeout)
 {
 	spin_lock(&io_lock);
 
-	if (w83697ug_select_wd_register() < 0)
+	if (w83697ug_select_wd_register() < 0) {
+		spin_unlock(&io_lock);
 		return;
+	}
 
 	outb_p(0xF4, WDT_EFER);    /* Select CRF4 */
 	outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF4 */
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
index a4fe7a38d9b..3bde56bce63 100644
--- a/drivers/watchdog/wdrtas.c
+++ b/drivers/watchdog/wdrtas.c
@@ -218,16 +218,14 @@ static void wdrtas_timer_keepalive(void)
  */
 static int wdrtas_get_temperature(void)
 {
-	long result;
+	int result;
 	int temperature = 0;
 
-	result = rtas_call(wdrtas_token_get_sensor_state, 2, 2,
-			   (void *)__pa(&temperature),
-			   WDRTAS_THERMAL_SENSOR, 0);
+	result = rtas_get_sensor(WDRTAS_THERMAL_SENSOR, 0, &temperature);
 
 	if (result < 0)
 		printk(KERN_WARNING "wdrtas: reading the thermal sensor "
-		       "faild: %li\n", result);
+		       "failed: %i\n", result);
 	else
 		temperature = ((temperature * 9) / 5) + 32; /* fahrenheit */
 
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 891d2e90753..abad71b1632 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -927,9 +927,9 @@ static struct irq_chip xen_dynamic_chip __read_mostly = {
 void __init xen_init_IRQ(void)
 {
 	int i;
-	size_t size = nr_cpu_ids * sizeof(struct cpu_evtchn_s);
 
-	cpu_evtchn_mask_p = alloc_bootmem(size);
+	cpu_evtchn_mask_p = kcalloc(nr_cpu_ids, sizeof(struct cpu_evtchn_s),
+				    GFP_KERNEL);
 	BUG_ON(cpu_evtchn_mask_p == NULL);
 
 	init_evtchn_cpu_bindings();
diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c
index 332b5ff02fe..f7003cfac63 100644
--- a/fs/9p/v9fs.c
+++ b/fs/9p/v9fs.c
@@ -76,7 +76,7 @@ static const match_table_t tokens = {
  * Return 0 upon success, -ERRNO upon failure.
  */
 
-static int v9fs_parse_options(struct v9fs_session_info *v9ses)
+static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts)
 {
 	char *options;
 	substring_t args[MAX_OPT_ARGS];
@@ -90,10 +90,10 @@ static int v9fs_parse_options(struct v9fs_session_info *v9ses)
 	v9ses->debug = 0;
 	v9ses->cache = 0;
 
-	if (!v9ses->options)
+	if (!opts)
 		return 0;
 
-	options = kstrdup(v9ses->options, GFP_KERNEL);
+	options = kstrdup(opts, GFP_KERNEL);
 	if (!options) {
 		P9_DPRINTK(P9_DEBUG_ERROR,
 			   "failed to allocate copy of option string\n");
@@ -206,24 +206,14 @@ struct p9_fid *v9fs_session_init(struct v9fs_session_info *v9ses,
 	v9ses->uid = ~0;
 	v9ses->dfltuid = V9FS_DEFUID;
 	v9ses->dfltgid = V9FS_DEFGID;
-	if (data) {
-		v9ses->options = kstrdup(data, GFP_KERNEL);
-		if (!v9ses->options) {
-			P9_DPRINTK(P9_DEBUG_ERROR,
-			   "failed to allocate copy of option string\n");
-			retval = -ENOMEM;
-			goto error;
-		}
-	}
 
-	rc = v9fs_parse_options(v9ses);
+	rc = v9fs_parse_options(v9ses, data);
 	if (rc < 0) {
 		retval = rc;
 		goto error;
 	}
 
-	v9ses->clnt = p9_client_create(dev_name, v9ses->options);
-
+	v9ses->clnt = p9_client_create(dev_name, data);
 	if (IS_ERR(v9ses->clnt)) {
 		retval = PTR_ERR(v9ses->clnt);
 		v9ses->clnt = NULL;
@@ -280,7 +270,6 @@ void v9fs_session_close(struct v9fs_session_info *v9ses)
 
 	__putname(v9ses->uname);
 	__putname(v9ses->aname);
-	kfree(v9ses->options);
 }
 
 /**
diff --git a/fs/9p/v9fs.h b/fs/9p/v9fs.h
index a7d56719299..38762bf102a 100644
--- a/fs/9p/v9fs.h
+++ b/fs/9p/v9fs.h
@@ -85,7 +85,6 @@ struct v9fs_session_info {
 	unsigned int afid;
 	unsigned int cache;
 
-	char *options;		/* copy of mount options */
 	char *uname;		/* user name to mount as */
 	char *aname;		/* name of remote hierarchy being mounted */
 	unsigned int maxdata;	/* max data for client interface */
diff --git a/fs/9p/vfs_addr.c b/fs/9p/vfs_addr.c
index 6fcb1e7095c..92828281a30 100644
--- a/fs/9p/vfs_addr.c
+++ b/fs/9p/vfs_addr.c
@@ -57,7 +57,7 @@ static int v9fs_vfs_readpage(struct file *filp, struct page *page)
 	buffer = kmap(page);
 	offset = page_offset(page);
 
-	retval = v9fs_file_readn(filp, buffer, NULL, offset, PAGE_CACHE_SIZE);
+	retval = v9fs_file_readn(filp, buffer, NULL, PAGE_CACHE_SIZE, offset);
 	if (retval < 0)
 		goto done;
 
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 81f8bbf12f9..06a223d50a8 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -171,7 +171,6 @@ int v9fs_uflags2omode(int uflags, int extended)
 
 /**
  * v9fs_blank_wstat - helper function to setup a 9P stat structure
- * @v9ses: 9P session info (for determining extended mode)
  * @wstat: structure to initialize
  *
  */
@@ -207,65 +206,72 @@ v9fs_blank_wstat(struct p9_wstat *wstat)
 
 struct inode *v9fs_get_inode(struct super_block *sb, int mode)
 {
+	int err;
 	struct inode *inode;
 	struct v9fs_session_info *v9ses = sb->s_fs_info;
 
 	P9_DPRINTK(P9_DEBUG_VFS, "super block: %p mode: %o\n", sb, mode);
 
 	inode = new_inode(sb);
-	if (inode) {
-		inode->i_mode = mode;
-		inode->i_uid = current_fsuid();
-		inode->i_gid = current_fsgid();
-		inode->i_blocks = 0;
-		inode->i_rdev = 0;
-		inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
-		inode->i_mapping->a_ops = &v9fs_addr_operations;
-
-		switch (mode & S_IFMT) {
-		case S_IFIFO:
-		case S_IFBLK:
-		case S_IFCHR:
-		case S_IFSOCK:
-			if (!v9fs_extended(v9ses)) {
-				P9_DPRINTK(P9_DEBUG_ERROR,
-				      "special files without extended mode\n");
-				return ERR_PTR(-EINVAL);
-			}
-			init_special_inode(inode, inode->i_mode,
-					   inode->i_rdev);
-			break;
-		case S_IFREG:
-			inode->i_op = &v9fs_file_inode_operations;
-			inode->i_fop = &v9fs_file_operations;
-			break;
-		case S_IFLNK:
-			if (!v9fs_extended(v9ses)) {
-				P9_DPRINTK(P9_DEBUG_ERROR,
-					"extended modes used w/o 9P2000.u\n");
-				return ERR_PTR(-EINVAL);
-			}
-			inode->i_op = &v9fs_symlink_inode_operations;
-			break;
-		case S_IFDIR:
-			inc_nlink(inode);
-			if (v9fs_extended(v9ses))
-				inode->i_op = &v9fs_dir_inode_operations_ext;
-			else
-				inode->i_op = &v9fs_dir_inode_operations;
-			inode->i_fop = &v9fs_dir_operations;
-			break;
-		default:
-			P9_DPRINTK(P9_DEBUG_ERROR,
-				"BAD mode 0x%x S_IFMT 0x%x\n",
-				mode, mode & S_IFMT);
-			return ERR_PTR(-EINVAL);
-		}
-	} else {
+	if (!inode) {
 		P9_EPRINTK(KERN_WARNING, "Problem allocating inode\n");
 		return ERR_PTR(-ENOMEM);
 	}
+
+	inode->i_mode = mode;
+	inode->i_uid = current_fsuid();
+	inode->i_gid = current_fsgid();
+	inode->i_blocks = 0;
+	inode->i_rdev = 0;
+	inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+	inode->i_mapping->a_ops = &v9fs_addr_operations;
+
+	switch (mode & S_IFMT) {
+	case S_IFIFO:
+	case S_IFBLK:
+	case S_IFCHR:
+	case S_IFSOCK:
+		if (!v9fs_extended(v9ses)) {
+			P9_DPRINTK(P9_DEBUG_ERROR,
+				   "special files without extended mode\n");
+			err = -EINVAL;
+			goto error;
+		}
+		init_special_inode(inode, inode->i_mode, inode->i_rdev);
+		break;
+	case S_IFREG:
+		inode->i_op = &v9fs_file_inode_operations;
+		inode->i_fop = &v9fs_file_operations;
+		break;
+	case S_IFLNK:
+		if (!v9fs_extended(v9ses)) {
+			P9_DPRINTK(P9_DEBUG_ERROR,
+				   "extended modes used w/o 9P2000.u\n");
+			err = -EINVAL;
+			goto error;
+		}
+		inode->i_op = &v9fs_symlink_inode_operations;
+		break;
+	case S_IFDIR:
+		inc_nlink(inode);
+		if (v9fs_extended(v9ses))
+			inode->i_op = &v9fs_dir_inode_operations_ext;
+		else
+			inode->i_op = &v9fs_dir_inode_operations;
+		inode->i_fop = &v9fs_dir_operations;
+		break;
+	default:
+		P9_DPRINTK(P9_DEBUG_ERROR, "BAD mode 0x%x S_IFMT 0x%x\n",
+			   mode, mode & S_IFMT);
+		err = -EINVAL;
+		goto error;
+	}
+
 	return inode;
+
+error:
+	iput(inode);
+	return ERR_PTR(err);
 }
 
 /*
@@ -338,30 +344,25 @@ v9fs_inode_from_fid(struct v9fs_session_info *v9ses, struct p9_fid *fid,
 
 	ret = NULL;
 	st = p9_client_stat(fid);
-	if (IS_ERR(st)) {
-		err = PTR_ERR(st);
-		st = NULL;
-		goto error;
-	}
+	if (IS_ERR(st))
+		return ERR_CAST(st);
 
 	umode = p9mode2unixmode(v9ses, st->mode);
 	ret = v9fs_get_inode(sb, umode);
 	if (IS_ERR(ret)) {
 		err = PTR_ERR(ret);
-		ret = NULL;
 		goto error;
 	}
 
 	v9fs_stat2inode(st, ret, sb);
 	ret->i_ino = v9fs_qid2ino(&st->qid);
+	p9stat_free(st);
 	kfree(st);
 	return ret;
 
 error:
+	p9stat_free(st);
 	kfree(st);
-	if (ret)
-		iput(ret);
-
 	return ERR_PTR(err);
 }
 
@@ -403,9 +404,9 @@ v9fs_open_created(struct inode *inode, struct file *file)
  * @v9ses: session information
  * @dir: directory that dentry is being created in
  * @dentry:  dentry that is being created
+ * @extension: 9p2000.u extension string to support devices, etc.
  * @perm: create permissions
  * @mode: open mode
- * @extension: 9p2000.u extension string to support devices, etc.
  *
  */
 static struct p9_fid *
@@ -470,7 +471,10 @@ v9fs_create(struct v9fs_session_info *v9ses, struct inode *dir,
 		dentry->d_op = &v9fs_dentry_operations;
 
 	d_instantiate(dentry, inode);
-	v9fs_fid_add(dentry, fid);
+	err = v9fs_fid_add(dentry, fid);
+	if (err < 0)
+		goto error;
+
 	return ofid;
 
 error:
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 38d695d66a0..8961f1a8f66 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -81,7 +81,7 @@ static int v9fs_set_super(struct super_block *s, void *data)
 
 static void
 v9fs_fill_super(struct super_block *sb, struct v9fs_session_info *v9ses,
-		int flags)
+		int flags, void *data)
 {
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
 	sb->s_blocksize_bits = fls(v9ses->maxdata - 1);
@@ -91,6 +91,8 @@ v9fs_fill_super(struct super_block *sb, struct v9fs_session_info *v9ses,
 
 	sb->s_flags = flags | MS_ACTIVE | MS_SYNCHRONOUS | MS_DIRSYNC |
 	    MS_NOATIME;
+
+	save_mount_options(sb, data);
 }
 
 /**
@@ -113,14 +115,11 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags,
 	struct v9fs_session_info *v9ses = NULL;
 	struct p9_wstat *st = NULL;
 	int mode = S_IRWXUGO | S_ISVTX;
-	uid_t uid = current_fsuid();
-	gid_t gid = current_fsgid();
 	struct p9_fid *fid;
 	int retval = 0;
 
 	P9_DPRINTK(P9_DEBUG_VFS, " \n");
 
-	st = NULL;
 	v9ses = kzalloc(sizeof(struct v9fs_session_info), GFP_KERNEL);
 	if (!v9ses)
 		return -ENOMEM;
@@ -142,7 +141,7 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags,
 		retval = PTR_ERR(sb);
 		goto free_stat;
 	}
-	v9fs_fill_super(sb, v9ses, flags);
+	v9fs_fill_super(sb, v9ses, flags, data);
 
 	inode = v9fs_get_inode(sb, S_IFDIR | mode);
 	if (IS_ERR(inode)) {
@@ -150,9 +149,6 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags,
 		goto release_sb;
 	}
 
-	inode->i_uid = uid;
-	inode->i_gid = gid;
-
 	root = d_alloc_root(inode);
 	if (!root) {
 		iput(inode);
@@ -173,10 +169,8 @@ P9_DPRINTK(P9_DEBUG_VFS, " simple set mount, return 0\n");
 	simple_set_mnt(mnt, sb);
 	return 0;
 
-release_sb:
-	deactivate_locked_super(sb);
-
 free_stat:
+	p9stat_free(st);
 	kfree(st);
 
 clunk_fid:
@@ -185,7 +179,12 @@ clunk_fid:
 close_session:
 	v9fs_session_close(v9ses);
 	kfree(v9ses);
+	return retval;
 
+release_sb:
+	p9stat_free(st);
+	kfree(st);
+	deactivate_locked_super(sb);
 	return retval;
 }
 
@@ -207,24 +206,10 @@ static void v9fs_kill_super(struct super_block *s)
 
 	v9fs_session_close(v9ses);
 	kfree(v9ses);
+	s->s_fs_info = NULL;
 	P9_DPRINTK(P9_DEBUG_VFS, "exiting kill_super\n");
 }
 
-/**
- * v9fs_show_options - Show mount options in /proc/mounts
- * @m: seq_file to write to
- * @mnt: mount descriptor
- *
- */
-
-static int v9fs_show_options(struct seq_file *m, struct vfsmount *mnt)
-{
-	struct v9fs_session_info *v9ses = mnt->mnt_sb->s_fs_info;
-
-	seq_printf(m, "%s", v9ses->options);
-	return 0;
-}
-
 static void
 v9fs_umount_begin(struct super_block *sb)
 {
@@ -237,7 +222,7 @@ v9fs_umount_begin(struct super_block *sb)
 static const struct super_operations v9fs_super_ops = {
 	.statfs = simple_statfs,
 	.clear_inode = v9fs_clear_inode,
-	.show_options = v9fs_show_options,
+	.show_options = generic_show_options,
 	.umount_begin = v9fs_umount_begin,
 };
 
diff --git a/fs/Kconfig b/fs/Kconfig
index a97263be6a9..0e7da7bb5d9 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -186,32 +186,7 @@ source "fs/romfs/Kconfig"
 source "fs/sysv/Kconfig"
 source "fs/ufs/Kconfig"
 source "fs/exofs/Kconfig"
-
-config NILFS2_FS
-	tristate "NILFS2 file system support (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	select CRC32
-	help
-	  NILFS2 is a log-structured file system (LFS) supporting continuous
-	  snapshotting.  In addition to versioning capability of the entire
-	  file system, users can even restore files mistakenly overwritten or
-	  destroyed just a few seconds ago.  Since this file system can keep
-	  consistency like conventional LFS, it achieves quick recovery after
-	  system crashes.
-
-	  NILFS2 creates a number of checkpoints every few seconds or per
-	  synchronous write basis (unless there is no change).  Users can
-	  select significant versions among continuously created checkpoints,
-	  and can change them into snapshots which will be preserved for long
-	  periods until they are changed back to checkpoints.  Each
-	  snapshot is mountable as a read-only file system concurrently with
-	  its writable mount, and this feature is convenient for online backup.
-
-	  Some features including atime, extended attributes, and POSIX ACLs,
-	  are not supported yet.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called nilfs2.  If unsure, say N.
+source "fs/nilfs2/Kconfig"
 
 endif # MISC_FILESYSTEMS
 
diff --git a/fs/adfs/super.c b/fs/adfs/super.c
index aad92f0a104..6910a98bd73 100644
--- a/fs/adfs/super.c
+++ b/fs/adfs/super.c
@@ -13,6 +13,7 @@
 #include <linux/parser.h>
 #include <linux/mount.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 #include <linux/statfs.h>
 #include "adfs.h"
 #include "dir_f.h"
diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index 9bd757774c9..88067f36e5e 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -564,7 +564,7 @@ static struct dentry *afs_lookup(struct inode *dir, struct dentry *dentry,
 static int afs_d_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
 	struct afs_vnode *vnode, *dir;
-	struct afs_fid fid;
+	struct afs_fid uninitialized_var(fid);
 	struct dentry *parent;
 	struct key *key;
 	void *dir_version;
diff --git a/fs/afs/file.c b/fs/afs/file.c
index 0149dab365e..681c2a7b013 100644
--- a/fs/afs/file.c
+++ b/fs/afs/file.c
@@ -134,9 +134,16 @@ static int afs_readpage(struct file *file, struct page *page)
 
 	inode = page->mapping->host;
 
-	ASSERT(file != NULL);
-	key = file->private_data;
-	ASSERT(key != NULL);
+	if (file) {
+		key = file->private_data;
+		ASSERT(key != NULL);
+	} else {
+		key = afs_request_key(AFS_FS_S(inode->i_sb)->volume->cell);
+		if (IS_ERR(key)) {
+			ret = PTR_ERR(key);
+			goto error_nokey;
+		}
+	}
 
 	_enter("{%x},{%lu},{%lu}", key_serial(key), inode->i_ino, page->index);
 
@@ -207,12 +214,17 @@ static int afs_readpage(struct file *file, struct page *page)
 		unlock_page(page);
 	}
 
+	if (!file)
+		key_put(key);
 	_leave(" = 0");
 	return 0;
 
 error:
 	SetPageError(page);
 	unlock_page(page);
+	if (!file)
+		key_put(key);
+error_nokey:
 	_leave(" = %d", ret);
 	return ret;
 }
diff --git a/fs/afs/flock.c b/fs/afs/flock.c
index 210acafe4a9..3ff8bdd18fb 100644
--- a/fs/afs/flock.c
+++ b/fs/afs/flock.c
@@ -432,7 +432,6 @@ vfs_rejected_lock:
 	list_del_init(&fl->fl_u.afs.link);
 	if (list_empty(&vnode->granted_locks))
 		afs_defer_unlock(vnode, key);
-	spin_unlock(&vnode->lock);
 	goto abort_attempt;
 }
 
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index c52be53f694..5ffb570cd3a 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -17,7 +17,6 @@
 #include <linux/pagemap.h>
 #include <linux/mount.h>
 #include <linux/namei.h>
-#include <linux/mnt_namespace.h>
 #include "internal.h"
 
 
diff --git a/fs/afs/super.c b/fs/afs/super.c
index ad0514d0115..e1ea1c240b6 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/fs.h>
 #include <linux/pagemap.h>
 #include <linux/parser.h>
diff --git a/fs/aio.c b/fs/aio.c
index 76da1253795..d065b2c3273 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -485,6 +485,8 @@ static inline void really_put_req(struct kioctx *ctx, struct kiocb *req)
 {
 	assert_spin_locked(&ctx->ctx_lock);
 
+	if (req->ki_eventfd != NULL)
+		eventfd_ctx_put(req->ki_eventfd);
 	if (req->ki_dtor)
 		req->ki_dtor(req);
 	if (req->ki_iovec != &req->ki_inline_vec)
@@ -509,8 +511,6 @@ static void aio_fput_routine(struct work_struct *data)
 		/* Complete the fput(s) */
 		if (req->ki_filp != NULL)
 			__fput(req->ki_filp);
-		if (req->ki_eventfd != NULL)
-			__fput(req->ki_eventfd);
 
 		/* Link the iocb into the context's free list */
 		spin_lock_irq(&ctx->ctx_lock);
@@ -528,8 +528,6 @@ static void aio_fput_routine(struct work_struct *data)
  */
 static int __aio_put_req(struct kioctx *ctx, struct kiocb *req)
 {
-	int schedule_putreq = 0;
-
 	dprintk(KERN_DEBUG "aio_put(%p): f_count=%ld\n",
 		req, atomic_long_read(&req->ki_filp->f_count));
 
@@ -549,24 +547,16 @@ static int __aio_put_req(struct kioctx *ctx, struct kiocb *req)
 	 * we would not be holding the last reference to the file*, so
 	 * this function will be executed w/out any aio kthread wakeup.
 	 */
-	if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count)))
-		schedule_putreq++;
-	else
-		req->ki_filp = NULL;
-	if (req->ki_eventfd != NULL) {
-		if (unlikely(atomic_long_dec_and_test(&req->ki_eventfd->f_count)))
-			schedule_putreq++;
-		else
-			req->ki_eventfd = NULL;
-	}
-	if (unlikely(schedule_putreq)) {
+	if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count))) {
 		get_ioctx(ctx);
 		spin_lock(&fput_lock);
 		list_add(&req->ki_list, &fput_head);
 		spin_unlock(&fput_lock);
 		queue_work(aio_wq, &fput_work);
-	} else
+	} else {
+		req->ki_filp = NULL;
 		really_put_req(ctx, req);
+	}
 	return 1;
 }
 
@@ -1622,7 +1612,7 @@ static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb,
 		 * an eventfd() fd, and will be signaled for each completed
 		 * event using the eventfd_signal() function.
 		 */
-		req->ki_eventfd = eventfd_fget((int) iocb->aio_resfd);
+		req->ki_eventfd = eventfd_ctx_fdget((int) iocb->aio_resfd);
 		if (IS_ERR(req->ki_eventfd)) {
 			ret = PTR_ERR(req->ki_eventfd);
 			req->ki_eventfd = NULL;
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index f3da2eb51f5..00bf8fcb245 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -19,7 +19,6 @@
 #include <linux/sched.h>
 #include <linux/compat.h>
 #include <linux/syscalls.h>
-#include <linux/smp_lock.h>
 #include <linux/magic.h>
 #include <linux/dcache.h>
 #include <linux/uaccess.h>
diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index aa39ae83f01..3da18d45348 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -77,7 +77,7 @@ static int autofs4_mount_busy(struct vfsmount *mnt, struct dentry *dentry)
 	}
 
 	/* Update the expiry counter if fs is busy */
-	if (!may_umount_tree(mnt)) {
+	if (!may_umount_tree(path.mnt)) {
 		struct autofs_info *ino = autofs4_dentry_ino(top);
 		ino->last_used = jiffies;
 		goto done;
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index 54bd07d44e6..1e41aadb106 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -8,7 +8,6 @@
 #include <linux/time.h>
 #include <linux/string.h>
 #include <linux/fs.h>
-#include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/sched.h>
 #include "bfs.h"
diff --git a/fs/bfs/file.c b/fs/bfs/file.c
index 6a021265f01..88b9a3ff44e 100644
--- a/fs/bfs/file.c
+++ b/fs/bfs/file.c
@@ -11,7 +11,6 @@
 
 #include <linux/fs.h>
 #include <linux/buffer_head.h>
-#include <linux/smp_lock.h>
 #include "bfs.h"
 
 #undef DEBUG
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 9fa212b014a..b7c1603cd4b 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1522,11 +1522,11 @@ static int fill_note_info(struct elfhdr *elf, int phdrs,
 	info->thread = NULL;
 
 	psinfo = kmalloc(sizeof(*psinfo), GFP_KERNEL);
-	fill_note(&info->psinfo, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo);
-
 	if (psinfo == NULL)
 		return 0;
 
+	fill_note(&info->psinfo, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo);
+
 	/*
 	 * Figure out how many notes we're going to need for each thread.
 	 */
@@ -1929,7 +1929,10 @@ static int elf_core_dump(long signr, struct pt_regs *regs, struct file *file, un
 	elf = kmalloc(sizeof(*elf), GFP_KERNEL);
 	if (!elf)
 		goto out;
-	
+	/*
+	 * The number of segs are recored into ELF header as 16bit value.
+	 * Please check DEFAULT_MAX_MAP_COUNT definition when you modify here.
+	 */
 	segs = current->mm->map_count;
 #ifdef ELF_CORE_EXTRA_PHDRS
 	segs += ELF_CORE_EXTRA_PHDRS;
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 697f6b5f131..e92f229e3c6 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -828,15 +828,22 @@ static int load_flat_shared_library(int id, struct lib_info *libs)
 	if (IS_ERR(bprm.file))
 		return res;
 
+	bprm.cred = prepare_exec_creds();
+	res = -ENOMEM;
+	if (!bprm.cred)
+		goto out;
+
 	res = prepare_binprm(&bprm);
 
 	if (res <= (unsigned long)-4096)
 		res = load_flat_file(&bprm, libs, id, NULL);
-	if (bprm.file) {
-		allow_write_access(bprm.file);
-		fput(bprm.file);
-		bprm.file = NULL;
-	}
+
+	abort_creds(bprm.cred);
+
+out:
+	allow_write_access(bprm.file);
+	fput(bprm.file);
+
 	return(res);
 }
 
diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
index 31c46a241ba..49a34e7f730 100644
--- a/fs/bio-integrity.c
+++ b/fs/bio-integrity.c
@@ -1,7 +1,7 @@
 /*
  * bio-integrity.c - bio data integrity extensions
  *
- * Copyright (C) 2007, 2008 Oracle Corporation
+ * Copyright (C) 2007, 2008, 2009 Oracle Corporation
  * Written by: Martin K. Petersen <martin.petersen@oracle.com>
  *
  * This program is free software; you can redistribute it and/or
@@ -25,63 +25,121 @@
 #include <linux/bio.h>
 #include <linux/workqueue.h>
 
-static struct kmem_cache *bio_integrity_slab __read_mostly;
-static mempool_t *bio_integrity_pool;
-static struct bio_set *integrity_bio_set;
+struct integrity_slab {
+	struct kmem_cache *slab;
+	unsigned short nr_vecs;
+	char name[8];
+};
+
+#define IS(x) { .nr_vecs = x, .name = "bip-"__stringify(x) }
+struct integrity_slab bip_slab[BIOVEC_NR_POOLS] __read_mostly = {
+	IS(1), IS(4), IS(16), IS(64), IS(128), IS(BIO_MAX_PAGES),
+};
+#undef IS
+
 static struct workqueue_struct *kintegrityd_wq;
 
+static inline unsigned int vecs_to_idx(unsigned int nr)
+{
+	switch (nr) {
+	case 1:
+		return 0;
+	case 2 ... 4:
+		return 1;
+	case 5 ... 16:
+		return 2;
+	case 17 ... 64:
+		return 3;
+	case 65 ... 128:
+		return 4;
+	case 129 ... BIO_MAX_PAGES:
+		return 5;
+	default:
+		BUG();
+	}
+}
+
+static inline int use_bip_pool(unsigned int idx)
+{
+	if (idx == BIOVEC_NR_POOLS)
+		return 1;
+
+	return 0;
+}
+
 /**
- * bio_integrity_alloc - Allocate integrity payload and attach it to bio
+ * bio_integrity_alloc_bioset - Allocate integrity payload and attach it to bio
  * @bio:	bio to attach integrity metadata to
  * @gfp_mask:	Memory allocation mask
  * @nr_vecs:	Number of integrity metadata scatter-gather elements
+ * @bs:		bio_set to allocate from
  *
  * Description: This function prepares a bio for attaching integrity
  * metadata.  nr_vecs specifies the maximum number of pages containing
  * integrity metadata that can be attached.
  */
-struct bio_integrity_payload *bio_integrity_alloc(struct bio *bio,
-						  gfp_t gfp_mask,
-						  unsigned int nr_vecs)
+struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *bio,
+							 gfp_t gfp_mask,
+							 unsigned int nr_vecs,
+							 struct bio_set *bs)
 {
 	struct bio_integrity_payload *bip;
-	struct bio_vec *iv;
-	unsigned long idx;
+	unsigned int idx = vecs_to_idx(nr_vecs);
 
 	BUG_ON(bio == NULL);
+	bip = NULL;
 
-	bip = mempool_alloc(bio_integrity_pool, gfp_mask);
-	if (unlikely(bip == NULL)) {
-		printk(KERN_ERR "%s: could not alloc bip\n", __func__);
-		return NULL;
-	}
+	/* Lower order allocations come straight from slab */
+	if (!use_bip_pool(idx))
+		bip = kmem_cache_alloc(bip_slab[idx].slab, gfp_mask);
 
-	memset(bip, 0, sizeof(*bip));
+	/* Use mempool if lower order alloc failed or max vecs were requested */
+	if (bip == NULL) {
+		bip = mempool_alloc(bs->bio_integrity_pool, gfp_mask);
 
-	iv = bvec_alloc_bs(gfp_mask, nr_vecs, &idx, integrity_bio_set);
-	if (unlikely(iv == NULL)) {
-		printk(KERN_ERR "%s: could not alloc bip_vec\n", __func__);
-		mempool_free(bip, bio_integrity_pool);
-		return NULL;
+		if (unlikely(bip == NULL)) {
+			printk(KERN_ERR "%s: could not alloc bip\n", __func__);
+			return NULL;
+		}
 	}
 
-	bip->bip_pool = idx;
-	bip->bip_vec = iv;
+	memset(bip, 0, sizeof(*bip));
+
+	bip->bip_slab = idx;
 	bip->bip_bio = bio;
 	bio->bi_integrity = bip;
 
 	return bip;
 }
+EXPORT_SYMBOL(bio_integrity_alloc_bioset);
+
+/**
+ * bio_integrity_alloc - Allocate integrity payload and attach it to bio
+ * @bio:	bio to attach integrity metadata to
+ * @gfp_mask:	Memory allocation mask
+ * @nr_vecs:	Number of integrity metadata scatter-gather elements
+ *
+ * Description: This function prepares a bio for attaching integrity
+ * metadata.  nr_vecs specifies the maximum number of pages containing
+ * integrity metadata that can be attached.
+ */
+struct bio_integrity_payload *bio_integrity_alloc(struct bio *bio,
+						  gfp_t gfp_mask,
+						  unsigned int nr_vecs)
+{
+	return bio_integrity_alloc_bioset(bio, gfp_mask, nr_vecs, fs_bio_set);
+}
 EXPORT_SYMBOL(bio_integrity_alloc);
 
 /**
  * bio_integrity_free - Free bio integrity payload
  * @bio:	bio containing bip to be freed
+ * @bs:		bio_set this bio was allocated from
  *
  * Description: Used to free the integrity portion of a bio. Usually
  * called from bio_free().
  */
-void bio_integrity_free(struct bio *bio)
+void bio_integrity_free(struct bio *bio, struct bio_set *bs)
 {
 	struct bio_integrity_payload *bip = bio->bi_integrity;
 
@@ -92,8 +150,10 @@ void bio_integrity_free(struct bio *bio)
 	    && bip->bip_buf != NULL)
 		kfree(bip->bip_buf);
 
-	bvec_free_bs(integrity_bio_set, bip->bip_vec, bip->bip_pool);
-	mempool_free(bip, bio_integrity_pool);
+	if (use_bip_pool(bip->bip_slab))
+		mempool_free(bip, bs->bio_integrity_pool);
+	else
+		kmem_cache_free(bip_slab[bip->bip_slab].slab, bip);
 
 	bio->bi_integrity = NULL;
 }
@@ -114,7 +174,7 @@ int bio_integrity_add_page(struct bio *bio, struct page *page,
 	struct bio_integrity_payload *bip = bio->bi_integrity;
 	struct bio_vec *iv;
 
-	if (bip->bip_vcnt >= bvec_nr_vecs(bip->bip_pool)) {
+	if (bip->bip_vcnt >= bvec_nr_vecs(bip->bip_slab)) {
 		printk(KERN_ERR "%s: bip_vec full\n", __func__);
 		return 0;
 	}
@@ -647,8 +707,8 @@ void bio_integrity_split(struct bio *bio, struct bio_pair *bp, int sectors)
 	bp->iv1 = bip->bip_vec[0];
 	bp->iv2 = bip->bip_vec[0];
 
-	bp->bip1.bip_vec = &bp->iv1;
-	bp->bip2.bip_vec = &bp->iv2;
+	bp->bip1.bip_vec[0] = bp->iv1;
+	bp->bip2.bip_vec[0] = bp->iv2;
 
 	bp->iv1.bv_len = sectors * bi->tuple_size;
 	bp->iv2.bv_offset += sectors * bi->tuple_size;
@@ -667,17 +727,19 @@ EXPORT_SYMBOL(bio_integrity_split);
  * @bio:	New bio
  * @bio_src:	Original bio
  * @gfp_mask:	Memory allocation mask
+ * @bs:		bio_set to allocate bip from
  *
  * Description:	Called to allocate a bip when cloning a bio
  */
-int bio_integrity_clone(struct bio *bio, struct bio *bio_src, gfp_t gfp_mask)
+int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
+			gfp_t gfp_mask, struct bio_set *bs)
 {
 	struct bio_integrity_payload *bip_src = bio_src->bi_integrity;
 	struct bio_integrity_payload *bip;
 
 	BUG_ON(bip_src == NULL);
 
-	bip = bio_integrity_alloc(bio, gfp_mask, bip_src->bip_vcnt);
+	bip = bio_integrity_alloc_bioset(bio, gfp_mask, bip_src->bip_vcnt, bs);
 
 	if (bip == NULL)
 		return -EIO;
@@ -693,25 +755,43 @@ int bio_integrity_clone(struct bio *bio, struct bio *bio_src, gfp_t gfp_mask)
 }
 EXPORT_SYMBOL(bio_integrity_clone);
 
-static int __init bio_integrity_init(void)
+int bioset_integrity_create(struct bio_set *bs, int pool_size)
 {
-	kintegrityd_wq = create_workqueue("kintegrityd");
+	unsigned int max_slab = vecs_to_idx(BIO_MAX_PAGES);
+
+	bs->bio_integrity_pool =
+		mempool_create_slab_pool(pool_size, bip_slab[max_slab].slab);
 
+	if (!bs->bio_integrity_pool)
+		return -1;
+
+	return 0;
+}
+EXPORT_SYMBOL(bioset_integrity_create);
+
+void bioset_integrity_free(struct bio_set *bs)
+{
+	if (bs->bio_integrity_pool)
+		mempool_destroy(bs->bio_integrity_pool);
+}
+EXPORT_SYMBOL(bioset_integrity_free);
+
+void __init bio_integrity_init(void)
+{
+	unsigned int i;
+
+	kintegrityd_wq = create_workqueue("kintegrityd");
 	if (!kintegrityd_wq)
 		panic("Failed to create kintegrityd\n");
 
-	bio_integrity_slab = KMEM_CACHE(bio_integrity_payload,
-					SLAB_HWCACHE_ALIGN|SLAB_PANIC);
+	for (i = 0 ; i < BIOVEC_NR_POOLS ; i++) {
+		unsigned int size;
 
-	bio_integrity_pool = mempool_create_slab_pool(BIO_POOL_SIZE,
-						      bio_integrity_slab);
-	if (!bio_integrity_pool)
-		panic("bio_integrity: can't allocate bip pool\n");
+		size = sizeof(struct bio_integrity_payload)
+			+ bip_slab[i].nr_vecs * sizeof(struct bio_vec);
 
-	integrity_bio_set = bioset_create(BIO_POOL_SIZE, 0);
-	if (!integrity_bio_set)
-		panic("bio_integrity: can't allocate bio_set\n");
-
-	return 0;
+		bip_slab[i].slab =
+			kmem_cache_create(bip_slab[i].name, size, 0,
+					  SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
+	}
 }
-subsys_initcall(bio_integrity_init);
diff --git a/fs/bio.c b/fs/bio.c
index 24c91404353..76738005c8e 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -238,7 +238,7 @@ void bio_free(struct bio *bio, struct bio_set *bs)
 		bvec_free_bs(bs, bio->bi_io_vec, BIO_POOL_IDX(bio));
 
 	if (bio_integrity(bio))
-		bio_integrity_free(bio);
+		bio_integrity_free(bio, bs);
 
 	/*
 	 * If we have front padding, adjust the bio pointer before freeing
@@ -341,7 +341,7 @@ struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
 static void bio_kmalloc_destructor(struct bio *bio)
 {
 	if (bio_integrity(bio))
-		bio_integrity_free(bio);
+		bio_integrity_free(bio, fs_bio_set);
 	kfree(bio);
 }
 
@@ -472,7 +472,7 @@ struct bio *bio_clone(struct bio *bio, gfp_t gfp_mask)
 	if (bio_integrity(bio)) {
 		int ret;
 
-		ret = bio_integrity_clone(b, bio, gfp_mask);
+		ret = bio_integrity_clone(b, bio, gfp_mask, fs_bio_set);
 
 		if (ret < 0) {
 			bio_put(b);
@@ -705,14 +705,13 @@ static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count,
 }
 
 static int __bio_copy_iov(struct bio *bio, struct bio_vec *iovecs,
-			  struct sg_iovec *iov, int iov_count, int uncopy,
-			  int do_free_page)
+			  struct sg_iovec *iov, int iov_count,
+			  int to_user, int from_user, int do_free_page)
 {
 	int ret = 0, i;
 	struct bio_vec *bvec;
 	int iov_idx = 0;
 	unsigned int iov_off = 0;
-	int read = bio_data_dir(bio) == READ;
 
 	__bio_for_each_segment(bvec, bio, i, 0) {
 		char *bv_addr = page_address(bvec->bv_page);
@@ -727,13 +726,14 @@ static int __bio_copy_iov(struct bio *bio, struct bio_vec *iovecs,
 			iov_addr = iov[iov_idx].iov_base + iov_off;
 
 			if (!ret) {
-				if (!read && !uncopy)
-					ret = copy_from_user(bv_addr, iov_addr,
-							     bytes);
-				if (read && uncopy)
+				if (to_user)
 					ret = copy_to_user(iov_addr, bv_addr,
 							   bytes);
 
+				if (from_user)
+					ret = copy_from_user(bv_addr, iov_addr,
+							     bytes);
+
 				if (ret)
 					ret = -EFAULT;
 			}
@@ -770,7 +770,8 @@ int bio_uncopy_user(struct bio *bio)
 
 	if (!bio_flagged(bio, BIO_NULL_MAPPED))
 		ret = __bio_copy_iov(bio, bmd->iovecs, bmd->sgvecs,
-				     bmd->nr_sgvecs, 1, bmd->is_our_pages);
+				     bmd->nr_sgvecs, bio_data_dir(bio) == READ,
+				     0, bmd->is_our_pages);
 	bio_free_map_data(bmd);
 	bio_put(bio);
 	return ret;
@@ -875,8 +876,9 @@ struct bio *bio_copy_user_iov(struct request_queue *q,
 	/*
 	 * success
 	 */
-	if (!write_to_vm && (!map_data || !map_data->null_mapped)) {
-		ret = __bio_copy_iov(bio, bio->bi_io_vec, iov, iov_count, 0, 0);
+	if ((!write_to_vm && (!map_data || !map_data->null_mapped)) ||
+	    (map_data && map_data->from_user)) {
+		ret = __bio_copy_iov(bio, bio->bi_io_vec, iov, iov_count, 0, 1, 0);
 		if (ret)
 			goto cleanup;
 	}
@@ -1539,6 +1541,7 @@ void bioset_free(struct bio_set *bs)
 	if (bs->bio_pool)
 		mempool_destroy(bs->bio_pool);
 
+	bioset_integrity_free(bs);
 	biovec_free_pools(bs);
 	bio_put_slab(bs);
 
@@ -1579,6 +1582,9 @@ struct bio_set *bioset_create(unsigned int pool_size, unsigned int front_pad)
 	if (!bs->bio_pool)
 		goto bad;
 
+	if (bioset_integrity_create(bs, pool_size))
+		goto bad;
+
 	if (!biovec_create_pools(bs, pool_size))
 		return bs;
 
@@ -1616,6 +1622,7 @@ static int __init init_bio(void)
 	if (!bio_slabs)
 		panic("bio: can't allocate bios\n");
 
+	bio_integrity_init();
 	biovec_init_slabs();
 
 	fs_bio_set = bioset_create(BIO_POOL_SIZE, 0);
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 3a6d4fb2a32..94dfda24c06 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -564,6 +564,16 @@ struct block_device *bdget(dev_t dev)
 
 EXPORT_SYMBOL(bdget);
 
+/**
+ * bdgrab -- Grab a reference to an already referenced block device
+ * @bdev:	Block device to grab a reference to.
+ */
+struct block_device *bdgrab(struct block_device *bdev)
+{
+	atomic_inc(&bdev->bd_inode->i_count);
+	return bdev;
+}
+
 long nr_blockdev_pages(void)
 {
 	struct block_device *bdev;
diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 7f88628a1a7..019e8af449a 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -299,8 +299,8 @@ int btrfs_start_workers(struct btrfs_workers *workers, int num_workers)
 					   "btrfs-%s-%d", workers->name,
 					   workers->num_workers + i);
 		if (IS_ERR(worker->task)) {
-			kfree(worker);
 			ret = PTR_ERR(worker->task);
+			kfree(worker);
 			goto fail;
 		}
 
@@ -424,11 +424,11 @@ int btrfs_requeue_work(struct btrfs_work *work)
 	 * list
 	 */
 	if (worker->idle) {
-		spin_lock_irqsave(&worker->workers->lock, flags);
+		spin_lock(&worker->workers->lock);
 		worker->idle = 0;
 		list_move_tail(&worker->worker_list,
 			       &worker->workers->worker_list);
-		spin_unlock_irqrestore(&worker->workers->lock, flags);
+		spin_unlock(&worker->workers->lock);
 	}
 	if (!worker->working) {
 		wake = 1;
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index de1e2fd3208..9d8ba4d54a3 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -26,7 +26,6 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/string.h>
-#include <linux/smp_lock.h>
 #include <linux/backing-dev.h>
 #include <linux/mpage.h>
 #include <linux/swap.h>
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 60a45f3a4e9..3fdcc0512d3 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -557,19 +557,7 @@ static int comp_keys(struct btrfs_disk_key *disk, struct btrfs_key *k2)
 
 	btrfs_disk_key_to_cpu(&k1, disk);
 
-	if (k1.objectid > k2->objectid)
-		return 1;
-	if (k1.objectid < k2->objectid)
-		return -1;
-	if (k1.type > k2->type)
-		return 1;
-	if (k1.type < k2->type)
-		return -1;
-	if (k1.offset > k2->offset)
-		return 1;
-	if (k1.offset < k2->offset)
-		return -1;
-	return 0;
+	return btrfs_comp_cpu_keys(&k1, k2);
 }
 
 /*
@@ -1052,9 +1040,6 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 	    BTRFS_NODEPTRS_PER_BLOCK(root) / 4)
 		return 0;
 
-	if (btrfs_header_nritems(mid) > 2)
-		return 0;
-
 	if (btrfs_header_nritems(mid) < 2)
 		err_on_enospc = 1;
 
@@ -1701,6 +1686,7 @@ int btrfs_search_slot(struct btrfs_trans_handle *trans, struct btrfs_root
 	struct extent_buffer *b;
 	int slot;
 	int ret;
+	int err;
 	int level;
 	int lowest_unlock = 1;
 	u8 lowest_level = 0;
@@ -1737,8 +1723,6 @@ again:
 			p->locks[level] = 1;
 
 		if (cow) {
-			int wret;
-
 			/*
 			 * if we don't really need to cow this block
 			 * then we don't want to set the path blocking,
@@ -1749,12 +1733,12 @@ again:
 
 			btrfs_set_path_blocking(p);
 
-			wret = btrfs_cow_block(trans, root, b,
-					       p->nodes[level + 1],
-					       p->slots[level + 1], &b);
-			if (wret) {
+			err = btrfs_cow_block(trans, root, b,
+					      p->nodes[level + 1],
+					      p->slots[level + 1], &b);
+			if (err) {
 				free_extent_buffer(b);
-				ret = wret;
+				ret = err;
 				goto done;
 			}
 		}
@@ -1793,41 +1777,45 @@ cow_done:
 		ret = bin_search(b, key, level, &slot);
 
 		if (level != 0) {
-			if (ret && slot > 0)
+			int dec = 0;
+			if (ret && slot > 0) {
+				dec = 1;
 				slot -= 1;
+			}
 			p->slots[level] = slot;
-			ret = setup_nodes_for_search(trans, root, p, b, level,
+			err = setup_nodes_for_search(trans, root, p, b, level,
 						     ins_len);
-			if (ret == -EAGAIN)
+			if (err == -EAGAIN)
 				goto again;
-			else if (ret)
+			if (err) {
+				ret = err;
 				goto done;
+			}
 			b = p->nodes[level];
 			slot = p->slots[level];
 
 			unlock_up(p, level, lowest_unlock);
 
-			/* this is only true while dropping a snapshot */
 			if (level == lowest_level) {
-				ret = 0;
+				if (dec)
+					p->slots[level]++;
 				goto done;
 			}
 
-			ret = read_block_for_search(trans, root, p,
+			err = read_block_for_search(trans, root, p,
 						    &b, level, slot, key);
-			if (ret == -EAGAIN)
+			if (err == -EAGAIN)
 				goto again;
-
-			if (ret == -EIO)
+			if (err) {
+				ret = err;
 				goto done;
+			}
 
 			if (!p->skip_locking) {
-				int lret;
-
 				btrfs_clear_path_blocking(p, NULL);
-				lret = btrfs_try_spin_lock(b);
+				err = btrfs_try_spin_lock(b);
 
-				if (!lret) {
+				if (!err) {
 					btrfs_set_path_blocking(p);
 					btrfs_tree_lock(b);
 					btrfs_clear_path_blocking(p, b);
@@ -1837,16 +1825,14 @@ cow_done:
 			p->slots[level] = slot;
 			if (ins_len > 0 &&
 			    btrfs_leaf_free_space(root, b) < ins_len) {
-				int sret;
-
 				btrfs_set_path_blocking(p);
-				sret = split_leaf(trans, root, key,
-						      p, ins_len, ret == 0);
+				err = split_leaf(trans, root, key,
+						 p, ins_len, ret == 0);
 				btrfs_clear_path_blocking(p, NULL);
 
-				BUG_ON(sret > 0);
-				if (sret) {
-					ret = sret;
+				BUG_ON(err > 0);
+				if (err) {
+					ret = err;
 					goto done;
 				}
 			}
@@ -3807,7 +3793,7 @@ int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 		}
 
 		/* delete the leaf if it is mostly empty */
-		if (used < BTRFS_LEAF_DATA_SIZE(root) / 2) {
+		if (used < BTRFS_LEAF_DATA_SIZE(root) / 3) {
 			/* push_leaf_left fixes the path.
 			 * make sure the path still points to our leaf
 			 * for possible call to del_ptr below
@@ -4042,10 +4028,9 @@ out:
  * calling this function.
  */
 int btrfs_find_next_key(struct btrfs_root *root, struct btrfs_path *path,
-			struct btrfs_key *key, int lowest_level,
+			struct btrfs_key *key, int level,
 			int cache_only, u64 min_trans)
 {
-	int level = lowest_level;
 	int slot;
 	struct extent_buffer *c;
 
@@ -4058,11 +4043,40 @@ int btrfs_find_next_key(struct btrfs_root *root, struct btrfs_path *path,
 		c = path->nodes[level];
 next:
 		if (slot >= btrfs_header_nritems(c)) {
-			level++;
-			if (level == BTRFS_MAX_LEVEL)
+			int ret;
+			int orig_lowest;
+			struct btrfs_key cur_key;
+			if (level + 1 >= BTRFS_MAX_LEVEL ||
+			    !path->nodes[level + 1])
 				return 1;
-			continue;
+
+			if (path->locks[level + 1]) {
+				level++;
+				continue;
+			}
+
+			slot = btrfs_header_nritems(c) - 1;
+			if (level == 0)
+				btrfs_item_key_to_cpu(c, &cur_key, slot);
+			else
+				btrfs_node_key_to_cpu(c, &cur_key, slot);
+
+			orig_lowest = path->lowest_level;
+			btrfs_release_path(root, path);
+			path->lowest_level = level;
+			ret = btrfs_search_slot(NULL, root, &cur_key, path,
+						0, 0);
+			path->lowest_level = orig_lowest;
+			if (ret < 0)
+				return ret;
+
+			c = path->nodes[level];
+			slot = path->slots[level];
+			if (ret == 0)
+				slot++;
+			goto next;
 		}
+
 		if (level == 0)
 			btrfs_item_key_to_cpu(c, key, slot);
 		else {
@@ -4146,7 +4160,8 @@ again:
 	 * advance the path if there are now more items available.
 	 */
 	if (nritems > 0 && path->slots[0] < nritems - 1) {
-		path->slots[0]++;
+		if (ret == 0)
+			path->slots[0]++;
 		ret = 0;
 		goto done;
 	}
@@ -4278,10 +4293,10 @@ int btrfs_previous_item(struct btrfs_root *root,
 			path->slots[0]--;
 
 		btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
-		if (found_key.type == type)
-			return 0;
 		if (found_key.objectid < min_objectid)
 			break;
+		if (found_key.type == type)
+			return 0;
 		if (found_key.objectid == min_objectid &&
 		    found_key.type < type)
 			break;
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 2779c2f5360..837435ce84c 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -481,7 +481,7 @@ struct btrfs_shared_data_ref {
 
 struct btrfs_extent_inline_ref {
 	u8 type;
-	u64 offset;
+	__le64 offset;
 } __attribute__ ((__packed__));
 
 /* old style backrefs item */
@@ -689,6 +689,7 @@ struct btrfs_space_info {
 	struct list_head block_groups;
 	spinlock_t lock;
 	struct rw_semaphore groups_sem;
+	atomic_t caching_threads;
 };
 
 /*
@@ -707,6 +708,9 @@ struct btrfs_free_cluster {
 	/* first extent starting offset */
 	u64 window_start;
 
+	/* if this cluster simply points at a bitmap in the block group */
+	bool points_to_bitmap;
+
 	struct btrfs_block_group_cache *block_group;
 	/*
 	 * when a cluster is allocated from a block group, we put the
@@ -716,24 +720,37 @@ struct btrfs_free_cluster {
 	struct list_head block_group_list;
 };
 
+enum btrfs_caching_type {
+	BTRFS_CACHE_NO		= 0,
+	BTRFS_CACHE_STARTED	= 1,
+	BTRFS_CACHE_FINISHED	= 2,
+};
+
 struct btrfs_block_group_cache {
 	struct btrfs_key key;
 	struct btrfs_block_group_item item;
+	struct btrfs_fs_info *fs_info;
 	spinlock_t lock;
-	struct mutex cache_mutex;
 	u64 pinned;
 	u64 reserved;
 	u64 flags;
-	int cached;
+	u64 sectorsize;
+	int extents_thresh;
+	int free_extents;
+	int total_bitmaps;
 	int ro;
 	int dirty;
 
+	/* cache tracking stuff */
+	wait_queue_head_t caching_q;
+	int cached;
+
 	struct btrfs_space_info *space_info;
 
 	/* free space cache stuff */
 	spinlock_t tree_lock;
-	struct rb_root free_space_bytes;
 	struct rb_root free_space_offset;
+	u64 free_space;
 
 	/* block group cache stuff */
 	struct rb_node cache_node;
@@ -808,6 +825,7 @@ struct btrfs_fs_info {
 	struct mutex drop_mutex;
 	struct mutex volume_mutex;
 	struct mutex tree_reloc_mutex;
+	struct rw_semaphore extent_commit_sem;
 
 	/*
 	 * this protects the ordered operations list only while we are
@@ -1988,6 +2006,7 @@ void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
 				 u64 bytes);
 void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
 			      u64 bytes);
+void btrfs_free_pinned_extents(struct btrfs_fs_info *info);
 /* ctree.c */
 int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key,
 		     int level, int *slot);
@@ -2074,8 +2093,7 @@ static inline int btrfs_insert_empty_item(struct btrfs_trans_handle *trans,
 int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path);
 int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path);
 int btrfs_leaf_free_space(struct btrfs_root *root, struct extent_buffer *leaf);
-int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
-			*root);
+int btrfs_drop_snapshot(struct btrfs_root *root, int update_ref);
 int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
 			struct btrfs_root *root,
 			struct extent_buffer *node,
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index d28d29c95f7..e83be2e4602 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1639,6 +1639,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	mutex_init(&fs_info->cleaner_mutex);
 	mutex_init(&fs_info->volume_mutex);
 	mutex_init(&fs_info->tree_reloc_mutex);
+	init_rwsem(&fs_info->extent_commit_sem);
 
 	btrfs_init_free_cluster(&fs_info->meta_alloc_cluster);
 	btrfs_init_free_cluster(&fs_info->data_alloc_cluster);
@@ -1799,6 +1800,11 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 					   btrfs_super_chunk_root(disk_super),
 					   blocksize, generation);
 	BUG_ON(!chunk_root->node);
+	if (!test_bit(EXTENT_BUFFER_UPTODATE, &chunk_root->node->bflags)) {
+		printk(KERN_WARNING "btrfs: failed to read chunk root on %s\n",
+		       sb->s_id);
+		goto fail_chunk_root;
+	}
 	btrfs_set_root_node(&chunk_root->root_item, chunk_root->node);
 	chunk_root->commit_root = btrfs_root_node(chunk_root);
 
@@ -1826,6 +1832,11 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 					  blocksize, generation);
 	if (!tree_root->node)
 		goto fail_chunk_root;
+	if (!test_bit(EXTENT_BUFFER_UPTODATE, &tree_root->node->bflags)) {
+		printk(KERN_WARNING "btrfs: failed to read tree root on %s\n",
+		       sb->s_id);
+		goto fail_tree_root;
+	}
 	btrfs_set_root_node(&tree_root->root_item, tree_root->node);
 	tree_root->commit_root = btrfs_root_node(tree_root);
 
@@ -2322,6 +2333,9 @@ int close_ctree(struct btrfs_root *root)
 			printk(KERN_ERR "btrfs: commit super ret %d\n", ret);
 	}
 
+	fs_info->closing = 2;
+	smp_mb();
+
 	if (fs_info->delalloc_bytes) {
 		printk(KERN_INFO "btrfs: at unmount delalloc count %llu\n",
 		       (unsigned long long)fs_info->delalloc_bytes);
@@ -2343,6 +2357,7 @@ int close_ctree(struct btrfs_root *root)
 	free_extent_buffer(root->fs_info->csum_root->commit_root);
 
 	btrfs_free_block_groups(root->fs_info);
+	btrfs_free_pinned_extents(root->fs_info);
 
 	del_fs_roots(fs_info);
 
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index edc7d208c5c..72a2b9c28e9 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -21,6 +21,7 @@
 #include <linux/blkdev.h>
 #include <linux/sort.h>
 #include <linux/rcupdate.h>
+#include <linux/kthread.h>
 #include "compat.h"
 #include "hash.h"
 #include "ctree.h"
@@ -61,6 +62,13 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans,
 			  struct btrfs_root *extent_root, u64 alloc_bytes,
 			  u64 flags, int force);
 
+static noinline int
+block_group_cache_done(struct btrfs_block_group_cache *cache)
+{
+	smp_mb();
+	return cache->cached == BTRFS_CACHE_FINISHED;
+}
+
 static int block_group_bits(struct btrfs_block_group_cache *cache, u64 bits)
 {
 	return (cache->flags & bits) == bits;
@@ -146,20 +154,70 @@ block_group_cache_tree_search(struct btrfs_fs_info *info, u64 bytenr,
 }
 
 /*
+ * We always set EXTENT_LOCKED for the super mirror extents so we don't
+ * overwrite them, so those bits need to be unset.  Also, if we are unmounting
+ * with pinned extents still sitting there because we had a block group caching,
+ * we need to clear those now, since we are done.
+ */
+void btrfs_free_pinned_extents(struct btrfs_fs_info *info)
+{
+	u64 start, end, last = 0;
+	int ret;
+
+	while (1) {
+		ret = find_first_extent_bit(&info->pinned_extents, last,
+					    &start, &end,
+					    EXTENT_LOCKED|EXTENT_DIRTY);
+		if (ret)
+			break;
+
+		clear_extent_bits(&info->pinned_extents, start, end,
+				  EXTENT_LOCKED|EXTENT_DIRTY, GFP_NOFS);
+		last = end+1;
+	}
+}
+
+static int remove_sb_from_cache(struct btrfs_root *root,
+				struct btrfs_block_group_cache *cache)
+{
+	struct btrfs_fs_info *fs_info = root->fs_info;
+	u64 bytenr;
+	u64 *logical;
+	int stripe_len;
+	int i, nr, ret;
+
+	for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
+		bytenr = btrfs_sb_offset(i);
+		ret = btrfs_rmap_block(&root->fs_info->mapping_tree,
+				       cache->key.objectid, bytenr,
+				       0, &logical, &nr, &stripe_len);
+		BUG_ON(ret);
+		while (nr--) {
+			try_lock_extent(&fs_info->pinned_extents,
+					logical[nr],
+					logical[nr] + stripe_len - 1, GFP_NOFS);
+		}
+		kfree(logical);
+	}
+
+	return 0;
+}
+
+/*
  * this is only called by cache_block_group, since we could have freed extents
  * we need to check the pinned_extents for any extents that can't be used yet
  * since their free space will be released as soon as the transaction commits.
  */
-static int add_new_free_space(struct btrfs_block_group_cache *block_group,
+static u64 add_new_free_space(struct btrfs_block_group_cache *block_group,
 			      struct btrfs_fs_info *info, u64 start, u64 end)
 {
-	u64 extent_start, extent_end, size;
+	u64 extent_start, extent_end, size, total_added = 0;
 	int ret;
 
 	while (start < end) {
 		ret = find_first_extent_bit(&info->pinned_extents, start,
 					    &extent_start, &extent_end,
-					    EXTENT_DIRTY);
+					    EXTENT_DIRTY|EXTENT_LOCKED);
 		if (ret)
 			break;
 
@@ -167,6 +225,7 @@ static int add_new_free_space(struct btrfs_block_group_cache *block_group,
 			start = extent_end + 1;
 		} else if (extent_start > start && extent_start < end) {
 			size = extent_start - start;
+			total_added += size;
 			ret = btrfs_add_free_space(block_group, start,
 						   size);
 			BUG_ON(ret);
@@ -178,84 +237,93 @@ static int add_new_free_space(struct btrfs_block_group_cache *block_group,
 
 	if (start < end) {
 		size = end - start;
+		total_added += size;
 		ret = btrfs_add_free_space(block_group, start, size);
 		BUG_ON(ret);
 	}
 
-	return 0;
+	return total_added;
 }
 
-static int remove_sb_from_cache(struct btrfs_root *root,
-				struct btrfs_block_group_cache *cache)
-{
-	u64 bytenr;
-	u64 *logical;
-	int stripe_len;
-	int i, nr, ret;
-
-	for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
-		bytenr = btrfs_sb_offset(i);
-		ret = btrfs_rmap_block(&root->fs_info->mapping_tree,
-				       cache->key.objectid, bytenr, 0,
-				       &logical, &nr, &stripe_len);
-		BUG_ON(ret);
-		while (nr--) {
-			btrfs_remove_free_space(cache, logical[nr],
-						stripe_len);
-		}
-		kfree(logical);
-	}
-	return 0;
-}
-
-static int cache_block_group(struct btrfs_root *root,
-			     struct btrfs_block_group_cache *block_group)
+static int caching_kthread(void *data)
 {
+	struct btrfs_block_group_cache *block_group = data;
+	struct btrfs_fs_info *fs_info = block_group->fs_info;
+	u64 last = 0;
 	struct btrfs_path *path;
 	int ret = 0;
 	struct btrfs_key key;
 	struct extent_buffer *leaf;
 	int slot;
-	u64 last;
+	u64 total_found = 0;
 
-	if (!block_group)
-		return 0;
-
-	root = root->fs_info->extent_root;
-
-	if (block_group->cached)
-		return 0;
+	BUG_ON(!fs_info);
 
 	path = btrfs_alloc_path();
 	if (!path)
 		return -ENOMEM;
 
-	path->reada = 2;
+	atomic_inc(&block_group->space_info->caching_threads);
+	last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET);
 	/*
-	 * we get into deadlocks with paths held by callers of this function.
-	 * since the alloc_mutex is protecting things right now, just
-	 * skip the locking here
+	 * We don't want to deadlock with somebody trying to allocate a new
+	 * extent for the extent root while also trying to search the extent
+	 * root to add free space.  So we skip locking and search the commit
+	 * root, since its read-only
 	 */
 	path->skip_locking = 1;
-	last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET);
+	path->search_commit_root = 1;
+	path->reada = 2;
+
 	key.objectid = last;
 	key.offset = 0;
 	btrfs_set_key_type(&key, BTRFS_EXTENT_ITEM_KEY);
-	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+again:
+	/* need to make sure the commit_root doesn't disappear */
+	down_read(&fs_info->extent_commit_sem);
+
+	ret = btrfs_search_slot(NULL, fs_info->extent_root, &key, path, 0, 0);
 	if (ret < 0)
 		goto err;
 
 	while (1) {
+		smp_mb();
+		if (block_group->fs_info->closing > 1) {
+			last = (u64)-1;
+			break;
+		}
+
 		leaf = path->nodes[0];
 		slot = path->slots[0];
 		if (slot >= btrfs_header_nritems(leaf)) {
-			ret = btrfs_next_leaf(root, path);
+			ret = btrfs_next_leaf(fs_info->extent_root, path);
 			if (ret < 0)
 				goto err;
-			if (ret == 0)
-				continue;
-			else
+			else if (ret)
 				break;
+
+			if (need_resched() ||
+			    btrfs_transaction_in_commit(fs_info)) {
+				leaf = path->nodes[0];
+
+				/* this shouldn't happen, but if the
+				 * leaf is empty just move on.
+				 */
+				if (btrfs_header_nritems(leaf) == 0)
+					break;
+				/*
+				 * we need to copy the key out so that
+				 * we are sure the next search advances
+				 * us forward in the btree.
+				 */
+				btrfs_item_key_to_cpu(leaf, &key, 0);
+				btrfs_release_path(fs_info->extent_root, path);
+				up_read(&fs_info->extent_commit_sem);
+				schedule_timeout(1);
+				goto again;
+			}
+
+			continue;
 		}
 		btrfs_item_key_to_cpu(leaf, &key, slot);
 		if (key.objectid < block_group->key.objectid)
@@ -266,24 +334,59 @@ static int cache_block_group(struct btrfs_root *root,
 			break;
 
 		if (btrfs_key_type(&key) == BTRFS_EXTENT_ITEM_KEY) {
-			add_new_free_space(block_group, root->fs_info, last,
-					   key.objectid);
-
+			total_found += add_new_free_space(block_group,
+							  fs_info, last,
+							  key.objectid);
 			last = key.objectid + key.offset;
 		}
+
+		if (total_found > (1024 * 1024 * 2)) {
+			total_found = 0;
+			wake_up(&block_group->caching_q);
+		}
 next:
 		path->slots[0]++;
 	}
+	ret = 0;
 
-	add_new_free_space(block_group, root->fs_info, last,
-			   block_group->key.objectid +
-			   block_group->key.offset);
+	total_found += add_new_free_space(block_group, fs_info, last,
+					  block_group->key.objectid +
+					  block_group->key.offset);
+
+	spin_lock(&block_group->lock);
+	block_group->cached = BTRFS_CACHE_FINISHED;
+	spin_unlock(&block_group->lock);
 
-	block_group->cached = 1;
-	remove_sb_from_cache(root, block_group);
-	ret = 0;
 err:
 	btrfs_free_path(path);
+	up_read(&fs_info->extent_commit_sem);
+	atomic_dec(&block_group->space_info->caching_threads);
+	wake_up(&block_group->caching_q);
+
+	return 0;
+}
+
+static int cache_block_group(struct btrfs_block_group_cache *cache)
+{
+	struct task_struct *tsk;
+	int ret = 0;
+
+	spin_lock(&cache->lock);
+	if (cache->cached != BTRFS_CACHE_NO) {
+		spin_unlock(&cache->lock);
+		return ret;
+	}
+	cache->cached = BTRFS_CACHE_STARTED;
+	spin_unlock(&cache->lock);
+
+	tsk = kthread_run(caching_kthread, cache, "btrfs-cache-%llu\n",
+			  cache->key.objectid);
+	if (IS_ERR(tsk)) {
+		ret = PTR_ERR(tsk);
+		printk(KERN_ERR "error running thread %d\n", ret);
+		BUG();
+	}
+
 	return ret;
 }
 
@@ -990,15 +1093,13 @@ static inline int extent_ref_type(u64 parent, u64 owner)
 	return type;
 }
 
-static int find_next_key(struct btrfs_path *path, struct btrfs_key *key)
+static int find_next_key(struct btrfs_path *path, int level,
+			 struct btrfs_key *key)
 
 {
-	int level;
-	BUG_ON(!path->keep_locks);
-	for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
+	for (; level < BTRFS_MAX_LEVEL; level++) {
 		if (!path->nodes[level])
 			break;
-		btrfs_assert_tree_locked(path->nodes[level]);
 		if (path->slots[level] + 1 >=
 		    btrfs_header_nritems(path->nodes[level]))
 			continue;
@@ -1158,7 +1259,8 @@ int lookup_inline_extent_backref(struct btrfs_trans_handle *trans,
 		 * For simplicity, we just do not add new inline back
 		 * ref if there is any kind of item for this block
 		 */
-		if (find_next_key(path, &key) == 0 && key.objectid == bytenr &&
+		if (find_next_key(path, 0, &key) == 0 &&
+		    key.objectid == bytenr &&
 		    key.type < BTRFS_BLOCK_GROUP_ITEM_KEY) {
 			err = -EAGAIN;
 			goto out;
@@ -2388,13 +2490,29 @@ fail:
 
 }
 
+static struct btrfs_block_group_cache *
+next_block_group(struct btrfs_root *root,
+		 struct btrfs_block_group_cache *cache)
+{
+	struct rb_node *node;
+	spin_lock(&root->fs_info->block_group_cache_lock);
+	node = rb_next(&cache->cache_node);
+	btrfs_put_block_group(cache);
+	if (node) {
+		cache = rb_entry(node, struct btrfs_block_group_cache,
+				 cache_node);
+		atomic_inc(&cache->count);
+	} else
+		cache = NULL;
+	spin_unlock(&root->fs_info->block_group_cache_lock);
+	return cache;
+}
+
 int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
 				   struct btrfs_root *root)
 {
-	struct btrfs_block_group_cache *cache, *entry;
-	struct rb_node *n;
+	struct btrfs_block_group_cache *cache;
 	int err = 0;
-	int werr = 0;
 	struct btrfs_path *path;
 	u64 last = 0;
 
@@ -2403,39 +2521,35 @@ int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
 		return -ENOMEM;
 
 	while (1) {
-		cache = NULL;
-		spin_lock(&root->fs_info->block_group_cache_lock);
-		for (n = rb_first(&root->fs_info->block_group_cache_tree);
-		     n; n = rb_next(n)) {
-			entry = rb_entry(n, struct btrfs_block_group_cache,
-					 cache_node);
-			if (entry->dirty) {
-				cache = entry;
-				break;
-			}
+		if (last == 0) {
+			err = btrfs_run_delayed_refs(trans, root,
+						     (unsigned long)-1);
+			BUG_ON(err);
 		}
-		spin_unlock(&root->fs_info->block_group_cache_lock);
 
-		if (!cache)
-			break;
+		cache = btrfs_lookup_first_block_group(root->fs_info, last);
+		while (cache) {
+			if (cache->dirty)
+				break;
+			cache = next_block_group(root, cache);
+		}
+		if (!cache) {
+			if (last == 0)
+				break;
+			last = 0;
+			continue;
+		}
 
 		cache->dirty = 0;
-		last += cache->key.offset;
+		last = cache->key.objectid + cache->key.offset;
 
-		err = write_one_cache_group(trans, root,
-					    path, cache);
-		/*
-		 * if we fail to write the cache group, we want
-		 * to keep it marked dirty in hopes that a later
-		 * write will work
-		 */
-		if (err) {
-			werr = err;
-			continue;
-		}
+		err = write_one_cache_group(trans, root, path, cache);
+		BUG_ON(err);
+		btrfs_put_block_group(cache);
 	}
+
 	btrfs_free_path(path);
-	return werr;
+	return 0;
 }
 
 int btrfs_extent_readonly(struct btrfs_root *root, u64 bytenr)
@@ -2485,6 +2599,7 @@ static int update_space_info(struct btrfs_fs_info *info, u64 flags,
 	found->force_alloc = 0;
 	*space_info = found;
 	list_add_rcu(&found->list, &info->space_info);
+	atomic_set(&found->caching_threads, 0);
 	return 0;
 }
 
@@ -2697,7 +2812,7 @@ again:
 
 		printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
 		       ", %llu bytes_used, %llu bytes_reserved, "
-		       "%llu bytes_pinned, %llu bytes_readonly, %llu may use"
+		       "%llu bytes_pinned, %llu bytes_readonly, %llu may use "
 		       "%llu total\n", (unsigned long long)bytes,
 		       (unsigned long long)data_sinfo->bytes_delalloc,
 		       (unsigned long long)data_sinfo->bytes_used,
@@ -2948,13 +3063,9 @@ int btrfs_update_pinned_extents(struct btrfs_root *root,
 	struct btrfs_block_group_cache *cache;
 	struct btrfs_fs_info *fs_info = root->fs_info;
 
-	if (pin) {
+	if (pin)
 		set_extent_dirty(&fs_info->pinned_extents,
 				bytenr, bytenr + num - 1, GFP_NOFS);
-	} else {
-		clear_extent_dirty(&fs_info->pinned_extents,
-				bytenr, bytenr + num - 1, GFP_NOFS);
-	}
 
 	while (num > 0) {
 		cache = btrfs_lookup_block_group(fs_info, bytenr);
@@ -2970,14 +3081,34 @@ int btrfs_update_pinned_extents(struct btrfs_root *root,
 			spin_unlock(&cache->space_info->lock);
 			fs_info->total_pinned += len;
 		} else {
+			int unpin = 0;
+
+			/*
+			 * in order to not race with the block group caching, we
+			 * only want to unpin the extent if we are cached.  If
+			 * we aren't cached, we want to start async caching this
+			 * block group so we can free the extent the next time
+			 * around.
+			 */
 			spin_lock(&cache->space_info->lock);
 			spin_lock(&cache->lock);
-			cache->pinned -= len;
-			cache->space_info->bytes_pinned -= len;
+			unpin = (cache->cached == BTRFS_CACHE_FINISHED);
+			if (likely(unpin)) {
+				cache->pinned -= len;
+				cache->space_info->bytes_pinned -= len;
+				fs_info->total_pinned -= len;
+			}
 			spin_unlock(&cache->lock);
 			spin_unlock(&cache->space_info->lock);
-			fs_info->total_pinned -= len;
-			if (cache->cached)
+
+			if (likely(unpin))
+				clear_extent_dirty(&fs_info->pinned_extents,
+						   bytenr, bytenr + len -1,
+						   GFP_NOFS);
+			else
+				cache_block_group(cache);
+
+			if (unpin)
 				btrfs_add_free_space(cache, bytenr, len);
 		}
 		btrfs_put_block_group(cache);
@@ -3031,6 +3162,7 @@ int btrfs_copy_pinned(struct btrfs_root *root, struct extent_io_tree *copy)
 					    &start, &end, EXTENT_DIRTY);
 		if (ret)
 			break;
+
 		set_extent_dirty(copy, start, end, GFP_NOFS);
 		last = end + 1;
 	}
@@ -3059,6 +3191,7 @@ int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans,
 
 		cond_resched();
 	}
+
 	return ret;
 }
 
@@ -3437,6 +3570,45 @@ static u64 stripe_align(struct btrfs_root *root, u64 val)
 }
 
 /*
+ * when we wait for progress in the block group caching, its because
+ * our allocation attempt failed at least once.  So, we must sleep
+ * and let some progress happen before we try again.
+ *
+ * This function will sleep at least once waiting for new free space to
+ * show up, and then it will check the block group free space numbers
+ * for our min num_bytes.  Another option is to have it go ahead
+ * and look in the rbtree for a free extent of a given size, but this
+ * is a good start.
+ */
+static noinline int
+wait_block_group_cache_progress(struct btrfs_block_group_cache *cache,
+				u64 num_bytes)
+{
+	DEFINE_WAIT(wait);
+
+	prepare_to_wait(&cache->caching_q, &wait, TASK_UNINTERRUPTIBLE);
+
+	if (block_group_cache_done(cache)) {
+		finish_wait(&cache->caching_q, &wait);
+		return 0;
+	}
+	schedule();
+	finish_wait(&cache->caching_q, &wait);
+
+	wait_event(cache->caching_q, block_group_cache_done(cache) ||
+		   (cache->free_space >= num_bytes));
+	return 0;
+}
+
+enum btrfs_loop_type {
+	LOOP_CACHED_ONLY = 0,
+	LOOP_CACHING_NOWAIT = 1,
+	LOOP_CACHING_WAIT = 2,
+	LOOP_ALLOC_CHUNK = 3,
+	LOOP_NO_EMPTY_SIZE = 4,
+};
+
+/*
  * walks the btree of allocated extents and find a hole of a given size.
  * The key ins is changed to record the hole:
  * ins->objectid == block start
@@ -3461,6 +3633,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans,
 	struct btrfs_space_info *space_info;
 	int last_ptr_loop = 0;
 	int loop = 0;
+	bool found_uncached_bg = false;
 
 	WARN_ON(num_bytes < root->sectorsize);
 	btrfs_set_key_type(ins, BTRFS_EXTENT_ITEM_KEY);
@@ -3492,15 +3665,18 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans,
 	search_start = max(search_start, first_logical_byte(root, 0));
 	search_start = max(search_start, hint_byte);
 
-	if (!last_ptr) {
+	if (!last_ptr)
 		empty_cluster = 0;
-		loop = 1;
-	}
 
 	if (search_start == hint_byte) {
 		block_group = btrfs_lookup_block_group(root->fs_info,
 						       search_start);
-		if (block_group && block_group_bits(block_group, data)) {
+		/*
+		 * we don't want to use the block group if it doesn't match our
+		 * allocation bits, or if its not cached.
+		 */
+		if (block_group && block_group_bits(block_group, data) &&
+		    block_group_cache_done(block_group)) {
 			down_read(&space_info->groups_sem);
 			if (list_empty(&block_group->list) ||
 			    block_group->ro) {
@@ -3523,21 +3699,35 @@ search:
 	down_read(&space_info->groups_sem);
 	list_for_each_entry(block_group, &space_info->block_groups, list) {
 		u64 offset;
+		int cached;
 
 		atomic_inc(&block_group->count);
 		search_start = block_group->key.objectid;
 
 have_block_group:
-		if (unlikely(!block_group->cached)) {
-			mutex_lock(&block_group->cache_mutex);
-			ret = cache_block_group(root, block_group);
-			mutex_unlock(&block_group->cache_mutex);
-			if (ret) {
-				btrfs_put_block_group(block_group);
-				break;
+		if (unlikely(block_group->cached == BTRFS_CACHE_NO)) {
+			/*
+			 * we want to start caching kthreads, but not too many
+			 * right off the bat so we don't overwhelm the system,
+			 * so only start them if there are less than 2 and we're
+			 * in the initial allocation phase.
+			 */
+			if (loop > LOOP_CACHING_NOWAIT ||
+			    atomic_read(&space_info->caching_threads) < 2) {
+				ret = cache_block_group(block_group);
+				BUG_ON(ret);
 			}
 		}
 
+		cached = block_group_cache_done(block_group);
+		if (unlikely(!cached)) {
+			found_uncached_bg = true;
+
+			/* if we only want cached bgs, loop */
+			if (loop == LOOP_CACHED_ONLY)
+				goto loop;
+		}
+
 		if (unlikely(block_group->ro))
 			goto loop;
 
@@ -3616,14 +3806,21 @@ refill_cluster:
 					spin_unlock(&last_ptr->refill_lock);
 					goto checks;
 				}
+			} else if (!cached && loop > LOOP_CACHING_NOWAIT) {
+				spin_unlock(&last_ptr->refill_lock);
+
+				wait_block_group_cache_progress(block_group,
+				       num_bytes + empty_cluster + empty_size);
+				goto have_block_group;
 			}
+
 			/*
 			 * at this point we either didn't find a cluster
 			 * or we weren't able to allocate a block from our
 			 * cluster.  Free the cluster we've been trying
 			 * to use, and go to the next block group
 			 */
-			if (loop < 2) {
+			if (loop < LOOP_NO_EMPTY_SIZE) {
 				btrfs_return_cluster_to_free_space(NULL,
 								   last_ptr);
 				spin_unlock(&last_ptr->refill_lock);
@@ -3634,11 +3831,17 @@ refill_cluster:
 
 		offset = btrfs_find_space_for_alloc(block_group, search_start,
 						    num_bytes, empty_size);
-		if (!offset)
+		if (!offset && (cached || (!cached &&
+					   loop == LOOP_CACHING_NOWAIT))) {
 			goto loop;
+		} else if (!offset && (!cached &&
+				       loop > LOOP_CACHING_NOWAIT)) {
+			wait_block_group_cache_progress(block_group,
+					num_bytes + empty_size);
+			goto have_block_group;
+		}
 checks:
 		search_start = stripe_align(root, offset);
-
 		/* move on to the next group */
 		if (search_start + num_bytes >= search_end) {
 			btrfs_add_free_space(block_group, offset, num_bytes);
@@ -3684,13 +3887,26 @@ loop:
 	}
 	up_read(&space_info->groups_sem);
 
-	/* loop == 0, try to find a clustered alloc in every block group
-	 * loop == 1, try again after forcing a chunk allocation
-	 * loop == 2, set empty_size and empty_cluster to 0 and try again
+	/* LOOP_CACHED_ONLY, only search fully cached block groups
+	 * LOOP_CACHING_NOWAIT, search partially cached block groups, but
+	 *			dont wait foR them to finish caching
+	 * LOOP_CACHING_WAIT, search everything, and wait if our bg is caching
+	 * LOOP_ALLOC_CHUNK, force a chunk allocation and try again
+	 * LOOP_NO_EMPTY_SIZE, set empty_size and empty_cluster to 0 and try
+	 *			again
 	 */
-	if (!ins->objectid && loop < 3 &&
-	    (empty_size || empty_cluster || allowed_chunk_alloc)) {
-		if (loop >= 2) {
+	if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE &&
+	    (found_uncached_bg || empty_size || empty_cluster ||
+	     allowed_chunk_alloc)) {
+		if (found_uncached_bg) {
+			found_uncached_bg = false;
+			if (loop < LOOP_CACHING_WAIT) {
+				loop++;
+				goto search;
+			}
+		}
+
+		if (loop == LOOP_ALLOC_CHUNK) {
 			empty_size = 0;
 			empty_cluster = 0;
 		}
@@ -3703,7 +3919,7 @@ loop:
 			space_info->force_alloc = 1;
 		}
 
-		if (loop < 3) {
+		if (loop < LOOP_NO_EMPTY_SIZE) {
 			loop++;
 			goto search;
 		}
@@ -3799,7 +4015,7 @@ again:
 			       num_bytes, data, 1);
 		goto again;
 	}
-	if (ret) {
+	if (ret == -ENOSPC) {
 		struct btrfs_space_info *sinfo;
 
 		sinfo = __find_space_info(root->fs_info, data);
@@ -3807,7 +4023,6 @@ again:
 		       "wanted %llu\n", (unsigned long long)data,
 		       (unsigned long long)num_bytes);
 		dump_space_info(sinfo, num_bytes);
-		BUG();
 	}
 
 	return ret;
@@ -3845,7 +4060,9 @@ int btrfs_reserve_extent(struct btrfs_trans_handle *trans,
 	ret = __btrfs_reserve_extent(trans, root, num_bytes, min_alloc_size,
 				     empty_size, hint_byte, search_end, ins,
 				     data);
-	update_reserved_extents(root, ins->objectid, ins->offset, 1);
+	if (!ret)
+		update_reserved_extents(root, ins->objectid, ins->offset, 1);
+
 	return ret;
 }
 
@@ -4007,9 +4224,9 @@ int btrfs_alloc_logged_file_extent(struct btrfs_trans_handle *trans,
 	struct btrfs_block_group_cache *block_group;
 
 	block_group = btrfs_lookup_block_group(root->fs_info, ins->objectid);
-	mutex_lock(&block_group->cache_mutex);
-	cache_block_group(root, block_group);
-	mutex_unlock(&block_group->cache_mutex);
+	cache_block_group(block_group);
+	wait_event(block_group->caching_q,
+		   block_group_cache_done(block_group));
 
 	ret = btrfs_remove_free_space(block_group, ins->objectid,
 				      ins->offset);
@@ -4040,7 +4257,8 @@ static int alloc_tree_block(struct btrfs_trans_handle *trans,
 	ret = __btrfs_reserve_extent(trans, root, num_bytes, num_bytes,
 				     empty_size, hint_byte, search_end,
 				     ins, 0);
-	BUG_ON(ret);
+	if (ret)
+		return ret;
 
 	if (root_objectid == BTRFS_TREE_RELOC_OBJECTID) {
 		if (parent == 0)
@@ -4128,6 +4346,7 @@ struct extent_buffer *btrfs_alloc_free_block(struct btrfs_trans_handle *trans,
 	return buf;
 }
 
+#if 0
 int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
 			struct btrfs_root *root, struct extent_buffer *leaf)
 {
@@ -4171,8 +4390,6 @@ int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
 	return 0;
 }
 
-#if 0
-
 static noinline int cache_drop_leaf_ref(struct btrfs_trans_handle *trans,
 					struct btrfs_root *root,
 					struct btrfs_leaf_ref *ref)
@@ -4553,262 +4770,471 @@ out:
 }
 #endif
 
+struct walk_control {
+	u64 refs[BTRFS_MAX_LEVEL];
+	u64 flags[BTRFS_MAX_LEVEL];
+	struct btrfs_key update_progress;
+	int stage;
+	int level;
+	int shared_level;
+	int update_ref;
+	int keep_locks;
+};
+
+#define DROP_REFERENCE	1
+#define UPDATE_BACKREF	2
+
 /*
- * helper function for drop_subtree, this function is similar to
- * walk_down_tree. The main difference is that it checks reference
- * counts while tree blocks are locked.
+ * hepler to process tree block while walking down the tree.
+ *
+ * when wc->stage == DROP_REFERENCE, this function checks
+ * reference count of the block. if the block is shared and
+ * we need update back refs for the subtree rooted at the
+ * block, this function changes wc->stage to UPDATE_BACKREF
+ *
+ * when wc->stage == UPDATE_BACKREF, this function updates
+ * back refs for pointers in the block.
+ *
+ * NOTE: return value 1 means we should stop walking down.
  */
-static noinline int walk_down_tree(struct btrfs_trans_handle *trans,
+static noinline int walk_down_proc(struct btrfs_trans_handle *trans,
 				   struct btrfs_root *root,
-				   struct btrfs_path *path, int *level)
+				   struct btrfs_path *path,
+				   struct walk_control *wc)
 {
-	struct extent_buffer *next;
-	struct extent_buffer *cur;
-	struct extent_buffer *parent;
-	u64 bytenr;
-	u64 ptr_gen;
-	u64 refs;
-	u64 flags;
-	u32 blocksize;
+	int level = wc->level;
+	struct extent_buffer *eb = path->nodes[level];
+	struct btrfs_key key;
+	u64 flag = BTRFS_BLOCK_FLAG_FULL_BACKREF;
 	int ret;
 
-	cur = path->nodes[*level];
-	ret = btrfs_lookup_extent_info(trans, root, cur->start, cur->len,
-				       &refs, &flags);
-	BUG_ON(ret);
-	if (refs > 1)
-		goto out;
+	if (wc->stage == UPDATE_BACKREF &&
+	    btrfs_header_owner(eb) != root->root_key.objectid)
+		return 1;
 
-	BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
+	/*
+	 * when reference count of tree block is 1, it won't increase
+	 * again. once full backref flag is set, we never clear it.
+	 */
+	if ((wc->stage == DROP_REFERENCE && wc->refs[level] != 1) ||
+	    (wc->stage == UPDATE_BACKREF && !(wc->flags[level] & flag))) {
+		BUG_ON(!path->locks[level]);
+		ret = btrfs_lookup_extent_info(trans, root,
+					       eb->start, eb->len,
+					       &wc->refs[level],
+					       &wc->flags[level]);
+		BUG_ON(ret);
+		BUG_ON(wc->refs[level] == 0);
+	}
 
-	while (*level >= 0) {
-		cur = path->nodes[*level];
-		if (*level == 0) {
-			ret = btrfs_drop_leaf_ref(trans, root, cur);
-			BUG_ON(ret);
-			clean_tree_block(trans, root, cur);
-			break;
-		}
-		if (path->slots[*level] >= btrfs_header_nritems(cur)) {
-			clean_tree_block(trans, root, cur);
-			break;
+	if (wc->stage == DROP_REFERENCE &&
+	    wc->update_ref && wc->refs[level] > 1) {
+		BUG_ON(eb == root->node);
+		BUG_ON(path->slots[level] > 0);
+		if (level == 0)
+			btrfs_item_key_to_cpu(eb, &key, path->slots[level]);
+		else
+			btrfs_node_key_to_cpu(eb, &key, path->slots[level]);
+		if (btrfs_header_owner(eb) == root->root_key.objectid &&
+		    btrfs_comp_cpu_keys(&key, &wc->update_progress) >= 0) {
+			wc->stage = UPDATE_BACKREF;
+			wc->shared_level = level;
 		}
+	}
 
-		bytenr = btrfs_node_blockptr(cur, path->slots[*level]);
-		blocksize = btrfs_level_size(root, *level - 1);
-		ptr_gen = btrfs_node_ptr_generation(cur, path->slots[*level]);
+	if (wc->stage == DROP_REFERENCE) {
+		if (wc->refs[level] > 1)
+			return 1;
 
-		next = read_tree_block(root, bytenr, blocksize, ptr_gen);
-		btrfs_tree_lock(next);
-		btrfs_set_lock_blocking(next);
+		if (path->locks[level] && !wc->keep_locks) {
+			btrfs_tree_unlock(eb);
+			path->locks[level] = 0;
+		}
+		return 0;
+	}
 
-		ret = btrfs_lookup_extent_info(trans, root, bytenr, blocksize,
-					       &refs, &flags);
+	/* wc->stage == UPDATE_BACKREF */
+	if (!(wc->flags[level] & flag)) {
+		BUG_ON(!path->locks[level]);
+		ret = btrfs_inc_ref(trans, root, eb, 1);
 		BUG_ON(ret);
-		if (refs > 1) {
-			parent = path->nodes[*level];
-			ret = btrfs_free_extent(trans, root, bytenr,
-						blocksize, parent->start,
-						btrfs_header_owner(parent),
-						*level - 1, 0);
+		ret = btrfs_dec_ref(trans, root, eb, 0);
+		BUG_ON(ret);
+		ret = btrfs_set_disk_extent_flags(trans, root, eb->start,
+						  eb->len, flag, 0);
+		BUG_ON(ret);
+		wc->flags[level] |= flag;
+	}
+
+	/*
+	 * the block is shared by multiple trees, so it's not good to
+	 * keep the tree lock
+	 */
+	if (path->locks[level] && level > 0) {
+		btrfs_tree_unlock(eb);
+		path->locks[level] = 0;
+	}
+	return 0;
+}
+
+/*
+ * hepler to process tree block while walking up the tree.
+ *
+ * when wc->stage == DROP_REFERENCE, this function drops
+ * reference count on the block.
+ *
+ * when wc->stage == UPDATE_BACKREF, this function changes
+ * wc->stage back to DROP_REFERENCE if we changed wc->stage
+ * to UPDATE_BACKREF previously while processing the block.
+ *
+ * NOTE: return value 1 means we should stop walking up.
+ */
+static noinline int walk_up_proc(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_path *path,
+				 struct walk_control *wc)
+{
+	int ret = 0;
+	int level = wc->level;
+	struct extent_buffer *eb = path->nodes[level];
+	u64 parent = 0;
+
+	if (wc->stage == UPDATE_BACKREF) {
+		BUG_ON(wc->shared_level < level);
+		if (level < wc->shared_level)
+			goto out;
+
+		BUG_ON(wc->refs[level] <= 1);
+		ret = find_next_key(path, level + 1, &wc->update_progress);
+		if (ret > 0)
+			wc->update_ref = 0;
+
+		wc->stage = DROP_REFERENCE;
+		wc->shared_level = -1;
+		path->slots[level] = 0;
+
+		/*
+		 * check reference count again if the block isn't locked.
+		 * we should start walking down the tree again if reference
+		 * count is one.
+		 */
+		if (!path->locks[level]) {
+			BUG_ON(level == 0);
+			btrfs_tree_lock(eb);
+			btrfs_set_lock_blocking(eb);
+			path->locks[level] = 1;
+
+			ret = btrfs_lookup_extent_info(trans, root,
+						       eb->start, eb->len,
+						       &wc->refs[level],
+						       &wc->flags[level]);
 			BUG_ON(ret);
-			path->slots[*level]++;
-			btrfs_tree_unlock(next);
-			free_extent_buffer(next);
-			continue;
+			BUG_ON(wc->refs[level] == 0);
+			if (wc->refs[level] == 1) {
+				btrfs_tree_unlock(eb);
+				path->locks[level] = 0;
+				return 1;
+			}
+		} else {
+			BUG_ON(level != 0);
 		}
+	}
 
-		BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
+	/* wc->stage == DROP_REFERENCE */
+	BUG_ON(wc->refs[level] > 1 && !path->locks[level]);
 
-		*level = btrfs_header_level(next);
-		path->nodes[*level] = next;
-		path->slots[*level] = 0;
-		path->locks[*level] = 1;
-		cond_resched();
+	if (wc->refs[level] == 1) {
+		if (level == 0) {
+			if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
+				ret = btrfs_dec_ref(trans, root, eb, 1);
+			else
+				ret = btrfs_dec_ref(trans, root, eb, 0);
+			BUG_ON(ret);
+		}
+		/* make block locked assertion in clean_tree_block happy */
+		if (!path->locks[level] &&
+		    btrfs_header_generation(eb) == trans->transid) {
+			btrfs_tree_lock(eb);
+			btrfs_set_lock_blocking(eb);
+			path->locks[level] = 1;
+		}
+		clean_tree_block(trans, root, eb);
 	}
-out:
-	if (path->nodes[*level] == root->node)
-		parent = path->nodes[*level];
-	else
-		parent = path->nodes[*level + 1];
-	bytenr = path->nodes[*level]->start;
-	blocksize = path->nodes[*level]->len;
 
-	ret = btrfs_free_extent(trans, root, bytenr, blocksize, parent->start,
-				btrfs_header_owner(parent), *level, 0);
+	if (eb == root->node) {
+		if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
+			parent = eb->start;
+		else
+			BUG_ON(root->root_key.objectid !=
+			       btrfs_header_owner(eb));
+	} else {
+		if (wc->flags[level + 1] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
+			parent = path->nodes[level + 1]->start;
+		else
+			BUG_ON(root->root_key.objectid !=
+			       btrfs_header_owner(path->nodes[level + 1]));
+	}
+
+	ret = btrfs_free_extent(trans, root, eb->start, eb->len, parent,
+				root->root_key.objectid, level, 0);
 	BUG_ON(ret);
+out:
+	wc->refs[level] = 0;
+	wc->flags[level] = 0;
+	return ret;
+}
+
+static noinline int walk_down_tree(struct btrfs_trans_handle *trans,
+				   struct btrfs_root *root,
+				   struct btrfs_path *path,
+				   struct walk_control *wc)
+{
+	struct extent_buffer *next;
+	struct extent_buffer *cur;
+	u64 bytenr;
+	u64 ptr_gen;
+	u32 blocksize;
+	int level = wc->level;
+	int ret;
+
+	while (level >= 0) {
+		cur = path->nodes[level];
+		BUG_ON(path->slots[level] >= btrfs_header_nritems(cur));
+
+		ret = walk_down_proc(trans, root, path, wc);
+		if (ret > 0)
+			break;
+
+		if (level == 0)
+			break;
+
+		bytenr = btrfs_node_blockptr(cur, path->slots[level]);
+		blocksize = btrfs_level_size(root, level - 1);
+		ptr_gen = btrfs_node_ptr_generation(cur, path->slots[level]);
+
+		next = read_tree_block(root, bytenr, blocksize, ptr_gen);
+		btrfs_tree_lock(next);
+		btrfs_set_lock_blocking(next);
 
-	if (path->locks[*level]) {
-		btrfs_tree_unlock(path->nodes[*level]);
-		path->locks[*level] = 0;
+		level--;
+		BUG_ON(level != btrfs_header_level(next));
+		path->nodes[level] = next;
+		path->slots[level] = 0;
+		path->locks[level] = 1;
+		wc->level = level;
 	}
-	free_extent_buffer(path->nodes[*level]);
-	path->nodes[*level] = NULL;
-	*level += 1;
-	cond_resched();
 	return 0;
 }
 
-/*
- * helper for dropping snapshots.  This walks back up the tree in the path
- * to find the first node higher up where we haven't yet gone through
- * all the slots
- */
 static noinline int walk_up_tree(struct btrfs_trans_handle *trans,
 				 struct btrfs_root *root,
 				 struct btrfs_path *path,
-				 int *level, int max_level)
+				 struct walk_control *wc, int max_level)
 {
-	struct btrfs_root_item *root_item = &root->root_item;
-	int i;
-	int slot;
+	int level = wc->level;
 	int ret;
 
-	for (i = *level; i < max_level && path->nodes[i]; i++) {
-		slot = path->slots[i];
-		if (slot + 1 < btrfs_header_nritems(path->nodes[i])) {
-			/*
-			 * there is more work to do in this level.
-			 * Update the drop_progress marker to reflect
-			 * the work we've done so far, and then bump
-			 * the slot number
-			 */
-			path->slots[i]++;
-			WARN_ON(*level == 0);
-			if (max_level == BTRFS_MAX_LEVEL) {
-				btrfs_node_key(path->nodes[i],
-					       &root_item->drop_progress,
-					       path->slots[i]);
-				root_item->drop_level = i;
-			}
-			*level = i;
+	path->slots[level] = btrfs_header_nritems(path->nodes[level]);
+	while (level < max_level && path->nodes[level]) {
+		wc->level = level;
+		if (path->slots[level] + 1 <
+		    btrfs_header_nritems(path->nodes[level])) {
+			path->slots[level]++;
 			return 0;
 		} else {
-			struct extent_buffer *parent;
-
-			/*
-			 * this whole node is done, free our reference
-			 * on it and go up one level
-			 */
-			if (path->nodes[*level] == root->node)
-				parent = path->nodes[*level];
-			else
-				parent = path->nodes[*level + 1];
+			ret = walk_up_proc(trans, root, path, wc);
+			if (ret > 0)
+				return 0;
 
-			clean_tree_block(trans, root, path->nodes[i]);
-			ret = btrfs_free_extent(trans, root,
-						path->nodes[i]->start,
-						path->nodes[i]->len,
-						parent->start,
-						btrfs_header_owner(parent),
-						*level, 0);
-			BUG_ON(ret);
-			if (path->locks[*level]) {
-				btrfs_tree_unlock(path->nodes[i]);
-				path->locks[i] = 0;
+			if (path->locks[level]) {
+				btrfs_tree_unlock(path->nodes[level]);
+				path->locks[level] = 0;
 			}
-			free_extent_buffer(path->nodes[i]);
-			path->nodes[i] = NULL;
-			*level = i + 1;
+			free_extent_buffer(path->nodes[level]);
+			path->nodes[level] = NULL;
+			level++;
 		}
 	}
 	return 1;
 }
 
 /*
- * drop the reference count on the tree rooted at 'snap'.  This traverses
- * the tree freeing any blocks that have a ref count of zero after being
- * decremented.
+ * drop a subvolume tree.
+ *
+ * this function traverses the tree freeing any blocks that only
+ * referenced by the tree.
+ *
+ * when a shared tree block is found. this function decreases its
+ * reference count by one. if update_ref is true, this function
+ * also make sure backrefs for the shared block and all lower level
+ * blocks are properly updated.
  */
-int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
-			*root)
+int btrfs_drop_snapshot(struct btrfs_root *root, int update_ref)
 {
-	int ret = 0;
-	int wret;
-	int level;
 	struct btrfs_path *path;
-	int update_count;
+	struct btrfs_trans_handle *trans;
+	struct btrfs_root *tree_root = root->fs_info->tree_root;
 	struct btrfs_root_item *root_item = &root->root_item;
+	struct walk_control *wc;
+	struct btrfs_key key;
+	int err = 0;
+	int ret;
+	int level;
 
 	path = btrfs_alloc_path();
 	BUG_ON(!path);
 
-	level = btrfs_header_level(root->node);
+	wc = kzalloc(sizeof(*wc), GFP_NOFS);
+	BUG_ON(!wc);
+
+	trans = btrfs_start_transaction(tree_root, 1);
+
 	if (btrfs_disk_key_objectid(&root_item->drop_progress) == 0) {
+		level = btrfs_header_level(root->node);
 		path->nodes[level] = btrfs_lock_root_node(root);
 		btrfs_set_lock_blocking(path->nodes[level]);
 		path->slots[level] = 0;
 		path->locks[level] = 1;
+		memset(&wc->update_progress, 0,
+		       sizeof(wc->update_progress));
 	} else {
-		struct btrfs_key key;
-		struct btrfs_disk_key found_key;
-		struct extent_buffer *node;
-
 		btrfs_disk_key_to_cpu(&key, &root_item->drop_progress);
+		memcpy(&wc->update_progress, &key,
+		       sizeof(wc->update_progress));
+
 		level = root_item->drop_level;
+		BUG_ON(level == 0);
 		path->lowest_level = level;
-		wret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
-		if (wret < 0) {
-			ret = wret;
+		ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+		path->lowest_level = 0;
+		if (ret < 0) {
+			err = ret;
 			goto out;
 		}
-		node = path->nodes[level];
-		btrfs_node_key(node, &found_key, path->slots[level]);
-		WARN_ON(memcmp(&found_key, &root_item->drop_progress,
-			       sizeof(found_key)));
+		btrfs_node_key_to_cpu(path->nodes[level], &key,
+				      path->slots[level]);
+		WARN_ON(memcmp(&key, &wc->update_progress, sizeof(key)));
+
 		/*
 		 * unlock our path, this is safe because only this
 		 * function is allowed to delete this snapshot
 		 */
 		btrfs_unlock_up_safe(path, 0);
+
+		level = btrfs_header_level(root->node);
+		while (1) {
+			btrfs_tree_lock(path->nodes[level]);
+			btrfs_set_lock_blocking(path->nodes[level]);
+
+			ret = btrfs_lookup_extent_info(trans, root,
+						path->nodes[level]->start,
+						path->nodes[level]->len,
+						&wc->refs[level],
+						&wc->flags[level]);
+			BUG_ON(ret);
+			BUG_ON(wc->refs[level] == 0);
+
+			if (level == root_item->drop_level)
+				break;
+
+			btrfs_tree_unlock(path->nodes[level]);
+			WARN_ON(wc->refs[level] != 1);
+			level--;
+		}
 	}
+
+	wc->level = level;
+	wc->shared_level = -1;
+	wc->stage = DROP_REFERENCE;
+	wc->update_ref = update_ref;
+	wc->keep_locks = 0;
+
 	while (1) {
-		unsigned long update;
-		wret = walk_down_tree(trans, root, path, &level);
-		if (wret > 0)
+		ret = walk_down_tree(trans, root, path, wc);
+		if (ret < 0) {
+			err = ret;
 			break;
-		if (wret < 0)
-			ret = wret;
+		}
 
-		wret = walk_up_tree(trans, root, path, &level,
-				    BTRFS_MAX_LEVEL);
-		if (wret > 0)
+		ret = walk_up_tree(trans, root, path, wc, BTRFS_MAX_LEVEL);
+		if (ret < 0) {
+			err = ret;
 			break;
-		if (wret < 0)
-			ret = wret;
-		if (trans->transaction->in_commit ||
-		    trans->transaction->delayed_refs.flushing) {
-			ret = -EAGAIN;
+		}
+
+		if (ret > 0) {
+			BUG_ON(wc->stage != DROP_REFERENCE);
 			break;
 		}
-		for (update_count = 0; update_count < 16; update_count++) {
+
+		if (wc->stage == DROP_REFERENCE) {
+			level = wc->level;
+			btrfs_node_key(path->nodes[level],
+				       &root_item->drop_progress,
+				       path->slots[level]);
+			root_item->drop_level = level;
+		}
+
+		BUG_ON(wc->level == 0);
+		if (trans->transaction->in_commit ||
+		    trans->transaction->delayed_refs.flushing) {
+			ret = btrfs_update_root(trans, tree_root,
+						&root->root_key,
+						root_item);
+			BUG_ON(ret);
+
+			btrfs_end_transaction(trans, tree_root);
+			trans = btrfs_start_transaction(tree_root, 1);
+		} else {
+			unsigned long update;
 			update = trans->delayed_ref_updates;
 			trans->delayed_ref_updates = 0;
 			if (update)
-				btrfs_run_delayed_refs(trans, root, update);
-			else
-				break;
+				btrfs_run_delayed_refs(trans, tree_root,
+						       update);
 		}
 	}
+	btrfs_release_path(root, path);
+	BUG_ON(err);
+
+	ret = btrfs_del_root(trans, tree_root, &root->root_key);
+	BUG_ON(ret);
+
+	free_extent_buffer(root->node);
+	free_extent_buffer(root->commit_root);
+	kfree(root);
 out:
+	btrfs_end_transaction(trans, tree_root);
+	kfree(wc);
 	btrfs_free_path(path);
-	return ret;
+	return err;
 }
 
+/*
+ * drop subtree rooted at tree block 'node'.
+ *
+ * NOTE: this function will unlock and release tree block 'node'
+ */
 int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
 			struct btrfs_root *root,
 			struct extent_buffer *node,
 			struct extent_buffer *parent)
 {
 	struct btrfs_path *path;
+	struct walk_control *wc;
 	int level;
 	int parent_level;
 	int ret = 0;
 	int wret;
 
+	BUG_ON(root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID);
+
 	path = btrfs_alloc_path();
 	BUG_ON(!path);
 
+	wc = kzalloc(sizeof(*wc), GFP_NOFS);
+	BUG_ON(!wc);
+
 	btrfs_assert_tree_locked(parent);
 	parent_level = btrfs_header_level(parent);
 	extent_buffer_get(parent);
@@ -4817,24 +5243,33 @@ int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
 
 	btrfs_assert_tree_locked(node);
 	level = btrfs_header_level(node);
-	extent_buffer_get(node);
 	path->nodes[level] = node;
 	path->slots[level] = 0;
+	path->locks[level] = 1;
+
+	wc->refs[parent_level] = 1;
+	wc->flags[parent_level] = BTRFS_BLOCK_FLAG_FULL_BACKREF;
+	wc->level = level;
+	wc->shared_level = -1;
+	wc->stage = DROP_REFERENCE;
+	wc->update_ref = 0;
+	wc->keep_locks = 1;
 
 	while (1) {
-		wret = walk_down_tree(trans, root, path, &level);
-		if (wret < 0)
+		wret = walk_down_tree(trans, root, path, wc);
+		if (wret < 0) {
 			ret = wret;
-		if (wret != 0)
 			break;
+		}
 
-		wret = walk_up_tree(trans, root, path, &level, parent_level);
+		wret = walk_up_tree(trans, root, path, wc, parent_level);
 		if (wret < 0)
 			ret = wret;
 		if (wret != 0)
 			break;
 	}
 
+	kfree(wc);
 	btrfs_free_path(path);
 	return ret;
 }
@@ -6739,11 +7174,16 @@ int btrfs_free_block_groups(struct btrfs_fs_info *info)
 			 &info->block_group_cache_tree);
 		spin_unlock(&info->block_group_cache_lock);
 
-		btrfs_remove_free_space_cache(block_group);
 		down_write(&block_group->space_info->groups_sem);
 		list_del(&block_group->list);
 		up_write(&block_group->space_info->groups_sem);
 
+		if (block_group->cached == BTRFS_CACHE_STARTED)
+			wait_event(block_group->caching_q,
+				   block_group_cache_done(block_group));
+
+		btrfs_remove_free_space_cache(block_group);
+
 		WARN_ON(atomic_read(&block_group->count) != 1);
 		kfree(block_group);
 
@@ -6809,9 +7249,19 @@ int btrfs_read_block_groups(struct btrfs_root *root)
 		atomic_set(&cache->count, 1);
 		spin_lock_init(&cache->lock);
 		spin_lock_init(&cache->tree_lock);
-		mutex_init(&cache->cache_mutex);
+		cache->fs_info = info;
+		init_waitqueue_head(&cache->caching_q);
 		INIT_LIST_HEAD(&cache->list);
 		INIT_LIST_HEAD(&cache->cluster_list);
+
+		/*
+		 * we only want to have 32k of ram per block group for keeping
+		 * track of free space, and if we pass 1/2 of that we want to
+		 * start converting things over to using bitmaps
+		 */
+		cache->extents_thresh = ((1024 * 32) / 2) /
+			sizeof(struct btrfs_free_space);
+
 		read_extent_buffer(leaf, &cache->item,
 				   btrfs_item_ptr_offset(leaf, path->slots[0]),
 				   sizeof(cache->item));
@@ -6820,6 +7270,26 @@ int btrfs_read_block_groups(struct btrfs_root *root)
 		key.objectid = found_key.objectid + found_key.offset;
 		btrfs_release_path(root, path);
 		cache->flags = btrfs_block_group_flags(&cache->item);
+		cache->sectorsize = root->sectorsize;
+
+		remove_sb_from_cache(root, cache);
+
+		/*
+		 * check for two cases, either we are full, and therefore
+		 * don't need to bother with the caching work since we won't
+		 * find any space, or we are empty, and we can just add all
+		 * the space in and be done with it.  This saves us _alot_ of
+		 * time, particularly in the full case.
+		 */
+		if (found_key.offset == btrfs_block_group_used(&cache->item)) {
+			cache->cached = BTRFS_CACHE_FINISHED;
+		} else if (btrfs_block_group_used(&cache->item) == 0) {
+			cache->cached = BTRFS_CACHE_FINISHED;
+			add_new_free_space(cache, root->fs_info,
+					   found_key.objectid,
+					   found_key.objectid +
+					   found_key.offset);
+		}
 
 		ret = update_space_info(info, cache->flags, found_key.offset,
 					btrfs_block_group_used(&cache->item),
@@ -6863,10 +7333,19 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans,
 	cache->key.objectid = chunk_offset;
 	cache->key.offset = size;
 	cache->key.type = BTRFS_BLOCK_GROUP_ITEM_KEY;
+	cache->sectorsize = root->sectorsize;
+
+	/*
+	 * we only want to have 32k of ram per block group for keeping track
+	 * of free space, and if we pass 1/2 of that we want to start
+	 * converting things over to using bitmaps
+	 */
+	cache->extents_thresh = ((1024 * 32) / 2) /
+		sizeof(struct btrfs_free_space);
 	atomic_set(&cache->count, 1);
 	spin_lock_init(&cache->lock);
 	spin_lock_init(&cache->tree_lock);
-	mutex_init(&cache->cache_mutex);
+	init_waitqueue_head(&cache->caching_q);
 	INIT_LIST_HEAD(&cache->list);
 	INIT_LIST_HEAD(&cache->cluster_list);
 
@@ -6875,6 +7354,12 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans,
 	cache->flags = type;
 	btrfs_set_block_group_flags(&cache->item, type);
 
+	cache->cached = BTRFS_CACHE_FINISHED;
+	remove_sb_from_cache(root, cache);
+
+	add_new_free_space(cache, root->fs_info, chunk_offset,
+			   chunk_offset + size);
+
 	ret = update_space_info(root->fs_info, cache->flags, size, bytes_used,
 				&cache->space_info);
 	BUG_ON(ret);
@@ -6933,7 +7418,7 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 	rb_erase(&block_group->cache_node,
 		 &root->fs_info->block_group_cache_tree);
 	spin_unlock(&root->fs_info->block_group_cache_lock);
-	btrfs_remove_free_space_cache(block_group);
+
 	down_write(&block_group->space_info->groups_sem);
 	/*
 	 * we must use list_del_init so people can check to see if they
@@ -6942,11 +7427,18 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 	list_del_init(&block_group->list);
 	up_write(&block_group->space_info->groups_sem);
 
+	if (block_group->cached == BTRFS_CACHE_STARTED)
+		wait_event(block_group->caching_q,
+			   block_group_cache_done(block_group));
+
+	btrfs_remove_free_space_cache(block_group);
+
 	spin_lock(&block_group->space_info->lock);
 	block_group->space_info->total_bytes -= block_group->key.offset;
 	block_group->space_info->bytes_readonly -= block_group->key.offset;
 	spin_unlock(&block_group->space_info->lock);
-	block_group->space_info->full = 0;
+
+	btrfs_clear_space_info_full(root->fs_info);
 
 	btrfs_put_block_group(block_group);
 	btrfs_put_block_group(block_group);
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 126477eaecf..4b833972273 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -22,7 +22,6 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/string.h>
-#include <linux/smp_lock.h>
 #include <linux/backing-dev.h>
 #include <linux/mpage.h>
 #include <linux/swap.h>
@@ -151,7 +150,10 @@ static noinline int dirty_and_release_pages(struct btrfs_trans_handle *trans,
 	}
 	if (end_pos > isize) {
 		i_size_write(inode, end_pos);
-		btrfs_update_inode(trans, root, inode);
+		/* we've only changed i_size in ram, and we haven't updated
+		 * the disk i_size.  There is no need to log the inode
+		 * at this time.
+		 */
 	}
 	err = btrfs_end_transaction(trans, root);
 out_unlock:
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 4538e48581a..5edcee3a617 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -16,45 +16,46 @@
  * Boston, MA 021110-1307, USA.
  */
 
+#include <linux/pagemap.h>
 #include <linux/sched.h>
+#include <linux/math64.h>
 #include "ctree.h"
 #include "free-space-cache.h"
 #include "transaction.h"
 
-struct btrfs_free_space {
-	struct rb_node bytes_index;
-	struct rb_node offset_index;
-	u64 offset;
-	u64 bytes;
-};
+#define BITS_PER_BITMAP		(PAGE_CACHE_SIZE * 8)
+#define MAX_CACHE_BYTES_PER_GIG	(32 * 1024)
 
-static int tree_insert_offset(struct rb_root *root, u64 offset,
-			      struct rb_node *node)
+static inline unsigned long offset_to_bit(u64 bitmap_start, u64 sectorsize,
+					  u64 offset)
 {
-	struct rb_node **p = &root->rb_node;
-	struct rb_node *parent = NULL;
-	struct btrfs_free_space *info;
+	BUG_ON(offset < bitmap_start);
+	offset -= bitmap_start;
+	return (unsigned long)(div64_u64(offset, sectorsize));
+}
 
-	while (*p) {
-		parent = *p;
-		info = rb_entry(parent, struct btrfs_free_space, offset_index);
+static inline unsigned long bytes_to_bits(u64 bytes, u64 sectorsize)
+{
+	return (unsigned long)(div64_u64(bytes, sectorsize));
+}
 
-		if (offset < info->offset)
-			p = &(*p)->rb_left;
-		else if (offset > info->offset)
-			p = &(*p)->rb_right;
-		else
-			return -EEXIST;
-	}
+static inline u64 offset_to_bitmap(struct btrfs_block_group_cache *block_group,
+				   u64 offset)
+{
+	u64 bitmap_start;
+	u64 bytes_per_bitmap;
 
-	rb_link_node(node, parent, p);
-	rb_insert_color(node, root);
+	bytes_per_bitmap = BITS_PER_BITMAP * block_group->sectorsize;
+	bitmap_start = offset - block_group->key.objectid;
+	bitmap_start = div64_u64(bitmap_start, bytes_per_bitmap);
+	bitmap_start *= bytes_per_bitmap;
+	bitmap_start += block_group->key.objectid;
 
-	return 0;
+	return bitmap_start;
 }
 
-static int tree_insert_bytes(struct rb_root *root, u64 bytes,
-			     struct rb_node *node)
+static int tree_insert_offset(struct rb_root *root, u64 offset,
+			      struct rb_node *node, int bitmap)
 {
 	struct rb_node **p = &root->rb_node;
 	struct rb_node *parent = NULL;
@@ -62,12 +63,34 @@ static int tree_insert_bytes(struct rb_root *root, u64 bytes,
 
 	while (*p) {
 		parent = *p;
-		info = rb_entry(parent, struct btrfs_free_space, bytes_index);
+		info = rb_entry(parent, struct btrfs_free_space, offset_index);
 
-		if (bytes < info->bytes)
+		if (offset < info->offset) {
 			p = &(*p)->rb_left;
-		else
+		} else if (offset > info->offset) {
 			p = &(*p)->rb_right;
+		} else {
+			/*
+			 * we could have a bitmap entry and an extent entry
+			 * share the same offset.  If this is the case, we want
+			 * the extent entry to always be found first if we do a
+			 * linear search through the tree, since we want to have
+			 * the quickest allocation time, and allocating from an
+			 * extent is faster than allocating from a bitmap.  So
+			 * if we're inserting a bitmap and we find an entry at
+			 * this offset, we want to go right, or after this entry
+			 * logically.  If we are inserting an extent and we've
+			 * found a bitmap, we want to go left, or before
+			 * logically.
+			 */
+			if (bitmap) {
+				WARN_ON(info->bitmap);
+				p = &(*p)->rb_right;
+			} else {
+				WARN_ON(!info->bitmap);
+				p = &(*p)->rb_left;
+			}
+		}
 	}
 
 	rb_link_node(node, parent, p);
@@ -79,110 +102,143 @@ static int tree_insert_bytes(struct rb_root *root, u64 bytes,
 /*
  * searches the tree for the given offset.
  *
- * fuzzy == 1: this is used for allocations where we are given a hint of where
- * to look for free space.  Because the hint may not be completely on an offset
- * mark, or the hint may no longer point to free space we need to fudge our
- * results a bit.  So we look for free space starting at or after offset with at
- * least bytes size.  We prefer to find as close to the given offset as we can.
- * Also if the offset is within a free space range, then we will return the free
- * space that contains the given offset, which means we can return a free space
- * chunk with an offset before the provided offset.
- *
- * fuzzy == 0: this is just a normal tree search.  Give us the free space that
- * starts at the given offset which is at least bytes size, and if its not there
- * return NULL.
+ * fuzzy - If this is set, then we are trying to make an allocation, and we just
+ * want a section that has at least bytes size and comes at or after the given
+ * offset.
  */
-static struct btrfs_free_space *tree_search_offset(struct rb_root *root,
-						   u64 offset, u64 bytes,
-						   int fuzzy)
+static struct btrfs_free_space *
+tree_search_offset(struct btrfs_block_group_cache *block_group,
+		   u64 offset, int bitmap_only, int fuzzy)
 {
-	struct rb_node *n = root->rb_node;
-	struct btrfs_free_space *entry, *ret = NULL;
+	struct rb_node *n = block_group->free_space_offset.rb_node;
+	struct btrfs_free_space *entry, *prev = NULL;
+
+	/* find entry that is closest to the 'offset' */
+	while (1) {
+		if (!n) {
+			entry = NULL;
+			break;
+		}
 
-	while (n) {
 		entry = rb_entry(n, struct btrfs_free_space, offset_index);
+		prev = entry;
 
-		if (offset < entry->offset) {
-			if (fuzzy &&
-			    (!ret || entry->offset < ret->offset) &&
-			    (bytes <= entry->bytes))
-				ret = entry;
+		if (offset < entry->offset)
 			n = n->rb_left;
-		} else if (offset > entry->offset) {
-			if (fuzzy &&
-			    (entry->offset + entry->bytes - 1) >= offset &&
-			    bytes <= entry->bytes) {
-				ret = entry;
-				break;
-			}
+		else if (offset > entry->offset)
 			n = n->rb_right;
-		} else {
-			if (bytes > entry->bytes) {
-				n = n->rb_right;
-				continue;
-			}
-			ret = entry;
+		else
 			break;
-		}
 	}
 
-	return ret;
-}
+	if (bitmap_only) {
+		if (!entry)
+			return NULL;
+		if (entry->bitmap)
+			return entry;
 
-/*
- * return a chunk at least bytes size, as close to offset that we can get.
- */
-static struct btrfs_free_space *tree_search_bytes(struct rb_root *root,
-						  u64 offset, u64 bytes)
-{
-	struct rb_node *n = root->rb_node;
-	struct btrfs_free_space *entry, *ret = NULL;
-
-	while (n) {
-		entry = rb_entry(n, struct btrfs_free_space, bytes_index);
+		/*
+		 * bitmap entry and extent entry may share same offset,
+		 * in that case, bitmap entry comes after extent entry.
+		 */
+		n = rb_next(n);
+		if (!n)
+			return NULL;
+		entry = rb_entry(n, struct btrfs_free_space, offset_index);
+		if (entry->offset != offset)
+			return NULL;
 
-		if (bytes < entry->bytes) {
+		WARN_ON(!entry->bitmap);
+		return entry;
+	} else if (entry) {
+		if (entry->bitmap) {
 			/*
-			 * We prefer to get a hole size as close to the size we
-			 * are asking for so we don't take small slivers out of
-			 * huge holes, but we also want to get as close to the
-			 * offset as possible so we don't have a whole lot of
-			 * fragmentation.
+			 * if previous extent entry covers the offset,
+			 * we should return it instead of the bitmap entry
 			 */
-			if (offset <= entry->offset) {
-				if (!ret)
-					ret = entry;
-				else if (entry->bytes < ret->bytes)
-					ret = entry;
-				else if (entry->offset < ret->offset)
-					ret = entry;
+			n = &entry->offset_index;
+			while (1) {
+				n = rb_prev(n);
+				if (!n)
+					break;
+				prev = rb_entry(n, struct btrfs_free_space,
+						offset_index);
+				if (!prev->bitmap) {
+					if (prev->offset + prev->bytes > offset)
+						entry = prev;
+					break;
+				}
 			}
-			n = n->rb_left;
-		} else if (bytes > entry->bytes) {
-			n = n->rb_right;
+		}
+		return entry;
+	}
+
+	if (!prev)
+		return NULL;
+
+	/* find last entry before the 'offset' */
+	entry = prev;
+	if (entry->offset > offset) {
+		n = rb_prev(&entry->offset_index);
+		if (n) {
+			entry = rb_entry(n, struct btrfs_free_space,
+					offset_index);
+			BUG_ON(entry->offset > offset);
 		} else {
-			/*
-			 * Ok we may have multiple chunks of the wanted size,
-			 * so we don't want to take the first one we find, we
-			 * want to take the one closest to our given offset, so
-			 * keep searching just in case theres a better match.
-			 */
-			n = n->rb_right;
-			if (offset > entry->offset)
-				continue;
-			else if (!ret || entry->offset < ret->offset)
-				ret = entry;
+			if (fuzzy)
+				return entry;
+			else
+				return NULL;
 		}
 	}
 
-	return ret;
+	if (entry->bitmap) {
+		n = &entry->offset_index;
+		while (1) {
+			n = rb_prev(n);
+			if (!n)
+				break;
+			prev = rb_entry(n, struct btrfs_free_space,
+					offset_index);
+			if (!prev->bitmap) {
+				if (prev->offset + prev->bytes > offset)
+					return prev;
+				break;
+			}
+		}
+		if (entry->offset + BITS_PER_BITMAP *
+		    block_group->sectorsize > offset)
+			return entry;
+	} else if (entry->offset + entry->bytes > offset)
+		return entry;
+
+	if (!fuzzy)
+		return NULL;
+
+	while (1) {
+		if (entry->bitmap) {
+			if (entry->offset + BITS_PER_BITMAP *
+			    block_group->sectorsize > offset)
+				break;
+		} else {
+			if (entry->offset + entry->bytes > offset)
+				break;
+		}
+
+		n = rb_next(&entry->offset_index);
+		if (!n)
+			return NULL;
+		entry = rb_entry(n, struct btrfs_free_space, offset_index);
+	}
+	return entry;
 }
 
 static void unlink_free_space(struct btrfs_block_group_cache *block_group,
 			      struct btrfs_free_space *info)
 {
 	rb_erase(&info->offset_index, &block_group->free_space_offset);
-	rb_erase(&info->bytes_index, &block_group->free_space_bytes);
+	block_group->free_extents--;
+	block_group->free_space -= info->bytes;
 }
 
 static int link_free_space(struct btrfs_block_group_cache *block_group,
@@ -190,17 +246,353 @@ static int link_free_space(struct btrfs_block_group_cache *block_group,
 {
 	int ret = 0;
 
-
-	BUG_ON(!info->bytes);
+	BUG_ON(!info->bitmap && !info->bytes);
 	ret = tree_insert_offset(&block_group->free_space_offset, info->offset,
-				 &info->offset_index);
+				 &info->offset_index, (info->bitmap != NULL));
 	if (ret)
 		return ret;
 
-	ret = tree_insert_bytes(&block_group->free_space_bytes, info->bytes,
-				&info->bytes_index);
-	if (ret)
-		return ret;
+	block_group->free_space += info->bytes;
+	block_group->free_extents++;
+	return ret;
+}
+
+static void recalculate_thresholds(struct btrfs_block_group_cache *block_group)
+{
+	u64 max_bytes, possible_bytes;
+
+	/*
+	 * The goal is to keep the total amount of memory used per 1gb of space
+	 * at or below 32k, so we need to adjust how much memory we allow to be
+	 * used by extent based free space tracking
+	 */
+	max_bytes = MAX_CACHE_BYTES_PER_GIG *
+		(div64_u64(block_group->key.offset, 1024 * 1024 * 1024));
+
+	possible_bytes = (block_group->total_bitmaps * PAGE_CACHE_SIZE) +
+		(sizeof(struct btrfs_free_space) *
+		 block_group->extents_thresh);
+
+	if (possible_bytes > max_bytes) {
+		int extent_bytes = max_bytes -
+			(block_group->total_bitmaps * PAGE_CACHE_SIZE);
+
+		if (extent_bytes <= 0) {
+			block_group->extents_thresh = 0;
+			return;
+		}
+
+		block_group->extents_thresh = extent_bytes /
+			(sizeof(struct btrfs_free_space));
+	}
+}
+
+static void bitmap_clear_bits(struct btrfs_block_group_cache *block_group,
+			      struct btrfs_free_space *info, u64 offset,
+			      u64 bytes)
+{
+	unsigned long start, end;
+	unsigned long i;
+
+	start = offset_to_bit(info->offset, block_group->sectorsize, offset);
+	end = start + bytes_to_bits(bytes, block_group->sectorsize);
+	BUG_ON(end > BITS_PER_BITMAP);
+
+	for (i = start; i < end; i++)
+		clear_bit(i, info->bitmap);
+
+	info->bytes -= bytes;
+	block_group->free_space -= bytes;
+}
+
+static void bitmap_set_bits(struct btrfs_block_group_cache *block_group,
+			    struct btrfs_free_space *info, u64 offset,
+			    u64 bytes)
+{
+	unsigned long start, end;
+	unsigned long i;
+
+	start = offset_to_bit(info->offset, block_group->sectorsize, offset);
+	end = start + bytes_to_bits(bytes, block_group->sectorsize);
+	BUG_ON(end > BITS_PER_BITMAP);
+
+	for (i = start; i < end; i++)
+		set_bit(i, info->bitmap);
+
+	info->bytes += bytes;
+	block_group->free_space += bytes;
+}
+
+static int search_bitmap(struct btrfs_block_group_cache *block_group,
+			 struct btrfs_free_space *bitmap_info, u64 *offset,
+			 u64 *bytes)
+{
+	unsigned long found_bits = 0;
+	unsigned long bits, i;
+	unsigned long next_zero;
+
+	i = offset_to_bit(bitmap_info->offset, block_group->sectorsize,
+			  max_t(u64, *offset, bitmap_info->offset));
+	bits = bytes_to_bits(*bytes, block_group->sectorsize);
+
+	for (i = find_next_bit(bitmap_info->bitmap, BITS_PER_BITMAP, i);
+	     i < BITS_PER_BITMAP;
+	     i = find_next_bit(bitmap_info->bitmap, BITS_PER_BITMAP, i + 1)) {
+		next_zero = find_next_zero_bit(bitmap_info->bitmap,
+					       BITS_PER_BITMAP, i);
+		if ((next_zero - i) >= bits) {
+			found_bits = next_zero - i;
+			break;
+		}
+		i = next_zero;
+	}
+
+	if (found_bits) {
+		*offset = (u64)(i * block_group->sectorsize) +
+			bitmap_info->offset;
+		*bytes = (u64)(found_bits) * block_group->sectorsize;
+		return 0;
+	}
+
+	return -1;
+}
+
+static struct btrfs_free_space *find_free_space(struct btrfs_block_group_cache
+						*block_group, u64 *offset,
+						u64 *bytes, int debug)
+{
+	struct btrfs_free_space *entry;
+	struct rb_node *node;
+	int ret;
+
+	if (!block_group->free_space_offset.rb_node)
+		return NULL;
+
+	entry = tree_search_offset(block_group,
+				   offset_to_bitmap(block_group, *offset),
+				   0, 1);
+	if (!entry)
+		return NULL;
+
+	for (node = &entry->offset_index; node; node = rb_next(node)) {
+		entry = rb_entry(node, struct btrfs_free_space, offset_index);
+		if (entry->bytes < *bytes)
+			continue;
+
+		if (entry->bitmap) {
+			ret = search_bitmap(block_group, entry, offset, bytes);
+			if (!ret)
+				return entry;
+			continue;
+		}
+
+		*offset = entry->offset;
+		*bytes = entry->bytes;
+		return entry;
+	}
+
+	return NULL;
+}
+
+static void add_new_bitmap(struct btrfs_block_group_cache *block_group,
+			   struct btrfs_free_space *info, u64 offset)
+{
+	u64 bytes_per_bg = BITS_PER_BITMAP * block_group->sectorsize;
+	int max_bitmaps = (int)div64_u64(block_group->key.offset +
+					 bytes_per_bg - 1, bytes_per_bg);
+	BUG_ON(block_group->total_bitmaps >= max_bitmaps);
+
+	info->offset = offset_to_bitmap(block_group, offset);
+	link_free_space(block_group, info);
+	block_group->total_bitmaps++;
+
+	recalculate_thresholds(block_group);
+}
+
+static noinline int remove_from_bitmap(struct btrfs_block_group_cache *block_group,
+			      struct btrfs_free_space *bitmap_info,
+			      u64 *offset, u64 *bytes)
+{
+	u64 end;
+	u64 search_start, search_bytes;
+	int ret;
+
+again:
+	end = bitmap_info->offset +
+		(u64)(BITS_PER_BITMAP * block_group->sectorsize) - 1;
+
+	/*
+	 * XXX - this can go away after a few releases.
+	 *
+	 * since the only user of btrfs_remove_free_space is the tree logging
+	 * stuff, and the only way to test that is under crash conditions, we
+	 * want to have this debug stuff here just in case somethings not
+	 * working.  Search the bitmap for the space we are trying to use to
+	 * make sure its actually there.  If its not there then we need to stop
+	 * because something has gone wrong.
+	 */
+	search_start = *offset;
+	search_bytes = *bytes;
+	ret = search_bitmap(block_group, bitmap_info, &search_start,
+			    &search_bytes);
+	BUG_ON(ret < 0 || search_start != *offset);
+
+	if (*offset > bitmap_info->offset && *offset + *bytes > end) {
+		bitmap_clear_bits(block_group, bitmap_info, *offset,
+				  end - *offset + 1);
+		*bytes -= end - *offset + 1;
+		*offset = end + 1;
+	} else if (*offset >= bitmap_info->offset && *offset + *bytes <= end) {
+		bitmap_clear_bits(block_group, bitmap_info, *offset, *bytes);
+		*bytes = 0;
+	}
+
+	if (*bytes) {
+		struct rb_node *next = rb_next(&bitmap_info->offset_index);
+		if (!bitmap_info->bytes) {
+			unlink_free_space(block_group, bitmap_info);
+			kfree(bitmap_info->bitmap);
+			kfree(bitmap_info);
+			block_group->total_bitmaps--;
+			recalculate_thresholds(block_group);
+		}
+
+		/*
+		 * no entry after this bitmap, but we still have bytes to
+		 * remove, so something has gone wrong.
+		 */
+		if (!next)
+			return -EINVAL;
+
+		bitmap_info = rb_entry(next, struct btrfs_free_space,
+				       offset_index);
+
+		/*
+		 * if the next entry isn't a bitmap we need to return to let the
+		 * extent stuff do its work.
+		 */
+		if (!bitmap_info->bitmap)
+			return -EAGAIN;
+
+		/*
+		 * Ok the next item is a bitmap, but it may not actually hold
+		 * the information for the rest of this free space stuff, so
+		 * look for it, and if we don't find it return so we can try
+		 * everything over again.
+		 */
+		search_start = *offset;
+		search_bytes = *bytes;
+		ret = search_bitmap(block_group, bitmap_info, &search_start,
+				    &search_bytes);
+		if (ret < 0 || search_start != *offset)
+			return -EAGAIN;
+
+		goto again;
+	} else if (!bitmap_info->bytes) {
+		unlink_free_space(block_group, bitmap_info);
+		kfree(bitmap_info->bitmap);
+		kfree(bitmap_info);
+		block_group->total_bitmaps--;
+		recalculate_thresholds(block_group);
+	}
+
+	return 0;
+}
+
+static int insert_into_bitmap(struct btrfs_block_group_cache *block_group,
+			      struct btrfs_free_space *info)
+{
+	struct btrfs_free_space *bitmap_info;
+	int added = 0;
+	u64 bytes, offset, end;
+	int ret;
+
+	/*
+	 * If we are below the extents threshold then we can add this as an
+	 * extent, and don't have to deal with the bitmap
+	 */
+	if (block_group->free_extents < block_group->extents_thresh &&
+	    info->bytes > block_group->sectorsize * 4)
+		return 0;
+
+	/*
+	 * some block groups are so tiny they can't be enveloped by a bitmap, so
+	 * don't even bother to create a bitmap for this
+	 */
+	if (BITS_PER_BITMAP * block_group->sectorsize >
+	    block_group->key.offset)
+		return 0;
+
+	bytes = info->bytes;
+	offset = info->offset;
+
+again:
+	bitmap_info = tree_search_offset(block_group,
+					 offset_to_bitmap(block_group, offset),
+					 1, 0);
+	if (!bitmap_info) {
+		BUG_ON(added);
+		goto new_bitmap;
+	}
+
+	end = bitmap_info->offset +
+		(u64)(BITS_PER_BITMAP * block_group->sectorsize);
+
+	if (offset >= bitmap_info->offset && offset + bytes > end) {
+		bitmap_set_bits(block_group, bitmap_info, offset,
+				end - offset);
+		bytes -= end - offset;
+		offset = end;
+		added = 0;
+	} else if (offset >= bitmap_info->offset && offset + bytes <= end) {
+		bitmap_set_bits(block_group, bitmap_info, offset, bytes);
+		bytes = 0;
+	} else {
+		BUG();
+	}
+
+	if (!bytes) {
+		ret = 1;
+		goto out;
+	} else
+		goto again;
+
+new_bitmap:
+	if (info && info->bitmap) {
+		add_new_bitmap(block_group, info, offset);
+		added = 1;
+		info = NULL;
+		goto again;
+	} else {
+		spin_unlock(&block_group->tree_lock);
+
+		/* no pre-allocated info, allocate a new one */
+		if (!info) {
+			info = kzalloc(sizeof(struct btrfs_free_space),
+				       GFP_NOFS);
+			if (!info) {
+				spin_lock(&block_group->tree_lock);
+				ret = -ENOMEM;
+				goto out;
+			}
+		}
+
+		/* allocate the bitmap */
+		info->bitmap = kzalloc(PAGE_CACHE_SIZE, GFP_NOFS);
+		spin_lock(&block_group->tree_lock);
+		if (!info->bitmap) {
+			ret = -ENOMEM;
+			goto out;
+		}
+		goto again;
+	}
+
+out:
+	if (info) {
+		if (info->bitmap)
+			kfree(info->bitmap);
+		kfree(info);
+	}
 
 	return ret;
 }
@@ -208,8 +600,8 @@ static int link_free_space(struct btrfs_block_group_cache *block_group,
 int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
 			 u64 offset, u64 bytes)
 {
-	struct btrfs_free_space *right_info;
-	struct btrfs_free_space *left_info;
+	struct btrfs_free_space *right_info = NULL;
+	struct btrfs_free_space *left_info = NULL;
 	struct btrfs_free_space *info = NULL;
 	int ret = 0;
 
@@ -227,18 +619,38 @@ int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
 	 * are adding, if there is remove that struct and add a new one to
 	 * cover the entire range
 	 */
-	right_info = tree_search_offset(&block_group->free_space_offset,
-					offset+bytes, 0, 0);
-	left_info = tree_search_offset(&block_group->free_space_offset,
-				       offset-1, 0, 1);
+	right_info = tree_search_offset(block_group, offset + bytes, 0, 0);
+	if (right_info && rb_prev(&right_info->offset_index))
+		left_info = rb_entry(rb_prev(&right_info->offset_index),
+				     struct btrfs_free_space, offset_index);
+	else
+		left_info = tree_search_offset(block_group, offset - 1, 0, 0);
+
+	/*
+	 * If there was no extent directly to the left or right of this new
+	 * extent then we know we're going to have to allocate a new extent, so
+	 * before we do that see if we need to drop this into a bitmap
+	 */
+	if ((!left_info || left_info->bitmap) &&
+	    (!right_info || right_info->bitmap)) {
+		ret = insert_into_bitmap(block_group, info);
+
+		if (ret < 0) {
+			goto out;
+		} else if (ret) {
+			ret = 0;
+			goto out;
+		}
+	}
 
-	if (right_info) {
+	if (right_info && !right_info->bitmap) {
 		unlink_free_space(block_group, right_info);
 		info->bytes += right_info->bytes;
 		kfree(right_info);
 	}
 
-	if (left_info && left_info->offset + left_info->bytes == offset) {
+	if (left_info && !left_info->bitmap &&
+	    left_info->offset + left_info->bytes == offset) {
 		unlink_free_space(block_group, left_info);
 		info->offset = left_info->offset;
 		info->bytes += left_info->bytes;
@@ -248,11 +660,11 @@ int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
 	ret = link_free_space(block_group, info);
 	if (ret)
 		kfree(info);
-
+out:
 	spin_unlock(&block_group->tree_lock);
 
 	if (ret) {
-		printk(KERN_ERR "btrfs: unable to add free space :%d\n", ret);
+		printk(KERN_CRIT "btrfs: unable to add free space :%d\n", ret);
 		BUG_ON(ret == -EEXIST);
 	}
 
@@ -263,40 +675,74 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
 			    u64 offset, u64 bytes)
 {
 	struct btrfs_free_space *info;
+	struct btrfs_free_space *next_info = NULL;
 	int ret = 0;
 
 	spin_lock(&block_group->tree_lock);
 
-	info = tree_search_offset(&block_group->free_space_offset, offset, 0,
-				  1);
-	if (info && info->offset == offset) {
-		if (info->bytes < bytes) {
-			printk(KERN_ERR "Found free space at %llu, size %llu,"
-			       "trying to use %llu\n",
-			       (unsigned long long)info->offset,
-			       (unsigned long long)info->bytes,
-			       (unsigned long long)bytes);
+again:
+	info = tree_search_offset(block_group, offset, 0, 0);
+	if (!info) {
+		/*
+		 * oops didn't find an extent that matched the space we wanted
+		 * to remove, look for a bitmap instead
+		 */
+		info = tree_search_offset(block_group,
+					  offset_to_bitmap(block_group, offset),
+					  1, 0);
+		if (!info) {
+			WARN_ON(1);
+			goto out_lock;
+		}
+	}
+
+	if (info->bytes < bytes && rb_next(&info->offset_index)) {
+		u64 end;
+		next_info = rb_entry(rb_next(&info->offset_index),
+					     struct btrfs_free_space,
+					     offset_index);
+
+		if (next_info->bitmap)
+			end = next_info->offset + BITS_PER_BITMAP *
+				block_group->sectorsize - 1;
+		else
+			end = next_info->offset + next_info->bytes;
+
+		if (next_info->bytes < bytes ||
+		    next_info->offset > offset || offset > end) {
+			printk(KERN_CRIT "Found free space at %llu, size %llu,"
+			      " trying to use %llu\n",
+			      (unsigned long long)info->offset,
+			      (unsigned long long)info->bytes,
+			      (unsigned long long)bytes);
 			WARN_ON(1);
 			ret = -EINVAL;
-			spin_unlock(&block_group->tree_lock);
-			goto out;
+			goto out_lock;
 		}
-		unlink_free_space(block_group, info);
 
-		if (info->bytes == bytes) {
-			kfree(info);
-			spin_unlock(&block_group->tree_lock);
-			goto out;
+		info = next_info;
+	}
+
+	if (info->bytes == bytes) {
+		unlink_free_space(block_group, info);
+		if (info->bitmap) {
+			kfree(info->bitmap);
+			block_group->total_bitmaps--;
 		}
+		kfree(info);
+		goto out_lock;
+	}
 
+	if (!info->bitmap && info->offset == offset) {
+		unlink_free_space(block_group, info);
 		info->offset += bytes;
 		info->bytes -= bytes;
+		link_free_space(block_group, info);
+		goto out_lock;
+	}
 
-		ret = link_free_space(block_group, info);
-		spin_unlock(&block_group->tree_lock);
-		BUG_ON(ret);
-	} else if (info && info->offset < offset &&
-		   info->offset + info->bytes >= offset + bytes) {
+	if (!info->bitmap && info->offset <= offset &&
+	    info->offset + info->bytes >= offset + bytes) {
 		u64 old_start = info->offset;
 		/*
 		 * we're freeing space in the middle of the info,
@@ -312,7 +758,9 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
 			info->offset = offset + bytes;
 			info->bytes = old_end - info->offset;
 			ret = link_free_space(block_group, info);
-			BUG_ON(ret);
+			WARN_ON(ret);
+			if (ret)
+				goto out_lock;
 		} else {
 			/* the hole we're creating ends at the end
 			 * of the info struct, just free the info
@@ -320,32 +768,22 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
 			kfree(info);
 		}
 		spin_unlock(&block_group->tree_lock);
-		/* step two, insert a new info struct to cover anything
-		 * before the hole
+
+		/* step two, insert a new info struct to cover
+		 * anything before the hole
 		 */
 		ret = btrfs_add_free_space(block_group, old_start,
 					   offset - old_start);
-		BUG_ON(ret);
-	} else {
-		spin_unlock(&block_group->tree_lock);
-		if (!info) {
-			printk(KERN_ERR "couldn't find space %llu to free\n",
-			       (unsigned long long)offset);
-			printk(KERN_ERR "cached is %d, offset %llu bytes %llu\n",
-			       block_group->cached,
-			       (unsigned long long)block_group->key.objectid,
-			       (unsigned long long)block_group->key.offset);
-			btrfs_dump_free_space(block_group, bytes);
-		} else if (info) {
-			printk(KERN_ERR "hmm, found offset=%llu bytes=%llu, "
-			       "but wanted offset=%llu bytes=%llu\n",
-			       (unsigned long long)info->offset,
-			       (unsigned long long)info->bytes,
-			       (unsigned long long)offset,
-			       (unsigned long long)bytes);
-		}
-		WARN_ON(1);
+		WARN_ON(ret);
+		goto out;
 	}
+
+	ret = remove_from_bitmap(block_group, info, &offset, &bytes);
+	if (ret == -EAGAIN)
+		goto again;
+	BUG_ON(ret);
+out_lock:
+	spin_unlock(&block_group->tree_lock);
 out:
 	return ret;
 }
@@ -361,10 +799,13 @@ void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group,
 		info = rb_entry(n, struct btrfs_free_space, offset_index);
 		if (info->bytes >= bytes)
 			count++;
-		printk(KERN_ERR "entry offset %llu, bytes %llu\n",
+		printk(KERN_CRIT "entry offset %llu, bytes %llu, bitmap %s\n",
 		       (unsigned long long)info->offset,
-		       (unsigned long long)info->bytes);
+		       (unsigned long long)info->bytes,
+		       (info->bitmap) ? "yes" : "no");
 	}
+	printk(KERN_INFO "block group has cluster?: %s\n",
+	       list_empty(&block_group->cluster_list) ? "no" : "yes");
 	printk(KERN_INFO "%d blocks of free space at or bigger than bytes is"
 	       "\n", count);
 }
@@ -397,26 +838,35 @@ __btrfs_return_cluster_to_free_space(
 {
 	struct btrfs_free_space *entry;
 	struct rb_node *node;
+	bool bitmap;
 
 	spin_lock(&cluster->lock);
 	if (cluster->block_group != block_group)
 		goto out;
 
+	bitmap = cluster->points_to_bitmap;
+	cluster->block_group = NULL;
 	cluster->window_start = 0;
+	list_del_init(&cluster->block_group_list);
+	cluster->points_to_bitmap = false;
+
+	if (bitmap)
+		goto out;
+
 	node = rb_first(&cluster->root);
-	while(node) {
+	while (node) {
 		entry = rb_entry(node, struct btrfs_free_space, offset_index);
 		node = rb_next(&entry->offset_index);
 		rb_erase(&entry->offset_index, &cluster->root);
-		link_free_space(block_group, entry);
+		BUG_ON(entry->bitmap);
+		tree_insert_offset(&block_group->free_space_offset,
+				   entry->offset, &entry->offset_index, 0);
 	}
-	list_del_init(&cluster->block_group_list);
-
-	btrfs_put_block_group(cluster->block_group);
-	cluster->block_group = NULL;
 	cluster->root.rb_node = NULL;
+
 out:
 	spin_unlock(&cluster->lock);
+	btrfs_put_block_group(block_group);
 	return 0;
 }
 
@@ -425,20 +875,28 @@ void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group)
 	struct btrfs_free_space *info;
 	struct rb_node *node;
 	struct btrfs_free_cluster *cluster;
-	struct btrfs_free_cluster *safe;
+	struct list_head *head;
 
 	spin_lock(&block_group->tree_lock);
-
-	list_for_each_entry_safe(cluster, safe, &block_group->cluster_list,
-				 block_group_list) {
+	while ((head = block_group->cluster_list.next) !=
+	       &block_group->cluster_list) {
+		cluster = list_entry(head, struct btrfs_free_cluster,
+				     block_group_list);
 
 		WARN_ON(cluster->block_group != block_group);
 		__btrfs_return_cluster_to_free_space(block_group, cluster);
+		if (need_resched()) {
+			spin_unlock(&block_group->tree_lock);
+			cond_resched();
+			spin_lock(&block_group->tree_lock);
+		}
 	}
 
-	while ((node = rb_last(&block_group->free_space_bytes)) != NULL) {
-		info = rb_entry(node, struct btrfs_free_space, bytes_index);
+	while ((node = rb_last(&block_group->free_space_offset)) != NULL) {
+		info = rb_entry(node, struct btrfs_free_space, offset_index);
 		unlink_free_space(block_group, info);
+		if (info->bitmap)
+			kfree(info->bitmap);
 		kfree(info);
 		if (need_resched()) {
 			spin_unlock(&block_group->tree_lock);
@@ -446,6 +904,7 @@ void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group)
 			spin_lock(&block_group->tree_lock);
 		}
 	}
+
 	spin_unlock(&block_group->tree_lock);
 }
 
@@ -453,25 +912,35 @@ u64 btrfs_find_space_for_alloc(struct btrfs_block_group_cache *block_group,
 			       u64 offset, u64 bytes, u64 empty_size)
 {
 	struct btrfs_free_space *entry = NULL;
+	u64 bytes_search = bytes + empty_size;
 	u64 ret = 0;
 
 	spin_lock(&block_group->tree_lock);
-	entry = tree_search_offset(&block_group->free_space_offset, offset,
-				   bytes + empty_size, 1);
+	entry = find_free_space(block_group, &offset, &bytes_search, 0);
 	if (!entry)
-		entry = tree_search_bytes(&block_group->free_space_bytes,
-					  offset, bytes + empty_size);
-	if (entry) {
+		goto out;
+
+	ret = offset;
+	if (entry->bitmap) {
+		bitmap_clear_bits(block_group, entry, offset, bytes);
+		if (!entry->bytes) {
+			unlink_free_space(block_group, entry);
+			kfree(entry->bitmap);
+			kfree(entry);
+			block_group->total_bitmaps--;
+			recalculate_thresholds(block_group);
+		}
+	} else {
 		unlink_free_space(block_group, entry);
-		ret = entry->offset;
 		entry->offset += bytes;
 		entry->bytes -= bytes;
-
 		if (!entry->bytes)
 			kfree(entry);
 		else
 			link_free_space(block_group, entry);
 	}
+
+out:
 	spin_unlock(&block_group->tree_lock);
 
 	return ret;
@@ -517,6 +986,54 @@ int btrfs_return_cluster_to_free_space(
 	return ret;
 }
 
+static u64 btrfs_alloc_from_bitmap(struct btrfs_block_group_cache *block_group,
+				   struct btrfs_free_cluster *cluster,
+				   u64 bytes, u64 min_start)
+{
+	struct btrfs_free_space *entry;
+	int err;
+	u64 search_start = cluster->window_start;
+	u64 search_bytes = bytes;
+	u64 ret = 0;
+
+	spin_lock(&block_group->tree_lock);
+	spin_lock(&cluster->lock);
+
+	if (!cluster->points_to_bitmap)
+		goto out;
+
+	if (cluster->block_group != block_group)
+		goto out;
+
+	/*
+	 * search_start is the beginning of the bitmap, but at some point it may
+	 * be a good idea to point to the actual start of the free area in the
+	 * bitmap, so do the offset_to_bitmap trick anyway, and set bitmap_only
+	 * to 1 to make sure we get the bitmap entry
+	 */
+	entry = tree_search_offset(block_group,
+				   offset_to_bitmap(block_group, search_start),
+				   1, 0);
+	if (!entry || !entry->bitmap)
+		goto out;
+
+	search_start = min_start;
+	search_bytes = bytes;
+
+	err = search_bitmap(block_group, entry, &search_start,
+			    &search_bytes);
+	if (err)
+		goto out;
+
+	ret = search_start;
+	bitmap_clear_bits(block_group, entry, ret, bytes);
+out:
+	spin_unlock(&cluster->lock);
+	spin_unlock(&block_group->tree_lock);
+
+	return ret;
+}
+
 /*
  * given a cluster, try to allocate 'bytes' from it, returns 0
  * if it couldn't find anything suitably large, or a logical disk offset
@@ -530,6 +1047,10 @@ u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group,
 	struct rb_node *node;
 	u64 ret = 0;
 
+	if (cluster->points_to_bitmap)
+		return btrfs_alloc_from_bitmap(block_group, cluster, bytes,
+					       min_start);
+
 	spin_lock(&cluster->lock);
 	if (bytes > cluster->max_size)
 		goto out;
@@ -567,9 +1088,73 @@ u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group,
 	}
 out:
 	spin_unlock(&cluster->lock);
+
 	return ret;
 }
 
+static int btrfs_bitmap_cluster(struct btrfs_block_group_cache *block_group,
+				struct btrfs_free_space *entry,
+				struct btrfs_free_cluster *cluster,
+				u64 offset, u64 bytes, u64 min_bytes)
+{
+	unsigned long next_zero;
+	unsigned long i;
+	unsigned long search_bits;
+	unsigned long total_bits;
+	unsigned long found_bits;
+	unsigned long start = 0;
+	unsigned long total_found = 0;
+	bool found = false;
+
+	i = offset_to_bit(entry->offset, block_group->sectorsize,
+			  max_t(u64, offset, entry->offset));
+	search_bits = bytes_to_bits(min_bytes, block_group->sectorsize);
+	total_bits = bytes_to_bits(bytes, block_group->sectorsize);
+
+again:
+	found_bits = 0;
+	for (i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, i);
+	     i < BITS_PER_BITMAP;
+	     i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, i + 1)) {
+		next_zero = find_next_zero_bit(entry->bitmap,
+					       BITS_PER_BITMAP, i);
+		if (next_zero - i >= search_bits) {
+			found_bits = next_zero - i;
+			break;
+		}
+		i = next_zero;
+	}
+
+	if (!found_bits)
+		return -1;
+
+	if (!found) {
+		start = i;
+		found = true;
+	}
+
+	total_found += found_bits;
+
+	if (cluster->max_size < found_bits * block_group->sectorsize)
+		cluster->max_size = found_bits * block_group->sectorsize;
+
+	if (total_found < total_bits) {
+		i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, next_zero);
+		if (i - start > total_bits * 2) {
+			total_found = 0;
+			cluster->max_size = 0;
+			found = false;
+		}
+		goto again;
+	}
+
+	cluster->window_start = start * block_group->sectorsize +
+		entry->offset;
+	cluster->points_to_bitmap = true;
+
+	return 0;
+}
+
 /*
  * here we try to find a cluster of blocks in a block group.  The goal
  * is to find at least bytes free and up to empty_size + bytes free.
@@ -587,12 +1172,12 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans,
 	struct btrfs_free_space *entry = NULL;
 	struct rb_node *node;
 	struct btrfs_free_space *next;
-	struct btrfs_free_space *last;
+	struct btrfs_free_space *last = NULL;
 	u64 min_bytes;
 	u64 window_start;
 	u64 window_free;
 	u64 max_extent = 0;
-	int total_retries = 0;
+	bool found_bitmap = false;
 	int ret;
 
 	/* for metadata, allow allocates with more holes */
@@ -620,31 +1205,80 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans,
 		goto out;
 	}
 again:
-	min_bytes = min(min_bytes, bytes + empty_size);
-	entry = tree_search_bytes(&block_group->free_space_bytes,
-				  offset, min_bytes);
+	entry = tree_search_offset(block_group, offset, found_bitmap, 1);
 	if (!entry) {
 		ret = -ENOSPC;
 		goto out;
 	}
+
+	/*
+	 * If found_bitmap is true, we exhausted our search for extent entries,
+	 * and we just want to search all of the bitmaps that we can find, and
+	 * ignore any extent entries we find.
+	 */
+	while (entry->bitmap || found_bitmap ||
+	       (!entry->bitmap && entry->bytes < min_bytes)) {
+		struct rb_node *node = rb_next(&entry->offset_index);
+
+		if (entry->bitmap && entry->bytes > bytes + empty_size) {
+			ret = btrfs_bitmap_cluster(block_group, entry, cluster,
+						   offset, bytes + empty_size,
+						   min_bytes);
+			if (!ret)
+				goto got_it;
+		}
+
+		if (!node) {
+			ret = -ENOSPC;
+			goto out;
+		}
+		entry = rb_entry(node, struct btrfs_free_space, offset_index);
+	}
+
+	/*
+	 * We already searched all the extent entries from the passed in offset
+	 * to the end and didn't find enough space for the cluster, and we also
+	 * didn't find any bitmaps that met our criteria, just go ahead and exit
+	 */
+	if (found_bitmap) {
+		ret = -ENOSPC;
+		goto out;
+	}
+
+	cluster->points_to_bitmap = false;
 	window_start = entry->offset;
 	window_free = entry->bytes;
 	last = entry;
 	max_extent = entry->bytes;
 
-	while(1) {
+	while (1) {
 		/* out window is just right, lets fill it */
 		if (window_free >= bytes + empty_size)
 			break;
 
 		node = rb_next(&last->offset_index);
 		if (!node) {
+			if (found_bitmap)
+				goto again;
 			ret = -ENOSPC;
 			goto out;
 		}
 		next = rb_entry(node, struct btrfs_free_space, offset_index);
 
 		/*
+		 * we found a bitmap, so if this search doesn't result in a
+		 * cluster, we know to go and search again for the bitmaps and
+		 * start looking for space there
+		 */
+		if (next->bitmap) {
+			if (!found_bitmap)
+				offset = next->offset;
+			found_bitmap = true;
+			last = next;
+			continue;
+		}
+
+		/*
 		 * we haven't filled the empty size and the window is
 		 * very large.  reset and try again
 		 */
@@ -655,19 +1289,6 @@ again:
 			window_free = entry->bytes;
 			last = entry;
 			max_extent = 0;
-			total_retries++;
-			if (total_retries % 64 == 0) {
-				if (min_bytes >= (bytes + empty_size)) {
-					ret = -ENOSPC;
-					goto out;
-				}
-				/*
-				 * grow our allocation a bit, we're not having
-				 * much luck
-				 */
-				min_bytes *= 2;
-				goto again;
-			}
 		} else {
 			last = next;
 			window_free += next->bytes;
@@ -685,11 +1306,19 @@ again:
 	 * The cluster includes an rbtree, but only uses the offset index
 	 * of each free space cache entry.
 	 */
-	while(1) {
+	while (1) {
 		node = rb_next(&entry->offset_index);
-		unlink_free_space(block_group, entry);
+		if (entry->bitmap && node) {
+			entry = rb_entry(node, struct btrfs_free_space,
+					 offset_index);
+			continue;
+		} else if (entry->bitmap && !node) {
+			break;
+		}
+
+		rb_erase(&entry->offset_index, &block_group->free_space_offset);
 		ret = tree_insert_offset(&cluster->root, entry->offset,
-					 &entry->offset_index);
+					 &entry->offset_index, 0);
 		BUG_ON(ret);
 
 		if (!node || entry == last)
@@ -697,8 +1326,10 @@ again:
 
 		entry = rb_entry(node, struct btrfs_free_space, offset_index);
 	}
-	ret = 0;
+
 	cluster->max_size = max_extent;
+got_it:
+	ret = 0;
 	atomic_inc(&block_group->count);
 	list_add_tail(&cluster->block_group_list, &block_group->cluster_list);
 	cluster->block_group = block_group;
@@ -718,6 +1349,7 @@ void btrfs_init_free_cluster(struct btrfs_free_cluster *cluster)
 	spin_lock_init(&cluster->refill_lock);
 	cluster->root.rb_node = NULL;
 	cluster->max_size = 0;
+	cluster->points_to_bitmap = false;
 	INIT_LIST_HEAD(&cluster->block_group_list);
 	cluster->block_group = NULL;
 }
diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h
index 266fb876405..890a8e79011 100644
--- a/fs/btrfs/free-space-cache.h
+++ b/fs/btrfs/free-space-cache.h
@@ -19,6 +19,14 @@
 #ifndef __BTRFS_FREE_SPACE_CACHE
 #define __BTRFS_FREE_SPACE_CACHE
 
+struct btrfs_free_space {
+	struct rb_node offset_index;
+	u64 offset;
+	u64 bytes;
+	unsigned long *bitmap;
+	struct list_head list;
+};
+
 int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
 			 u64 bytenr, u64 size);
 int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index dbe1aabf96c..59cba180fe8 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -26,7 +26,6 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/string.h>
-#include <linux/smp_lock.h>
 #include <linux/backing-dev.h>
 #include <linux/mpage.h>
 #include <linux/swap.h>
@@ -2604,8 +2603,8 @@ noinline int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans,
 	if (root->ref_cows)
 		btrfs_drop_extent_cache(inode, new_size & (~mask), (u64)-1, 0);
 	path = btrfs_alloc_path();
-	path->reada = -1;
 	BUG_ON(!path);
+	path->reada = -1;
 
 	/* FIXME, add redo link to tree so we don't leak on crash */
 	key.objectid = inode->i_ino;
@@ -3100,8 +3099,12 @@ static void inode_tree_add(struct inode *inode)
 {
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	struct btrfs_inode *entry;
-	struct rb_node **p = &root->inode_tree.rb_node;
-	struct rb_node *parent = NULL;
+	struct rb_node **p;
+	struct rb_node *parent;
+
+again:
+	p = &root->inode_tree.rb_node;
+	parent = NULL;
 
 	spin_lock(&root->inode_lock);
 	while (*p) {
@@ -3109,13 +3112,16 @@ static void inode_tree_add(struct inode *inode)
 		entry = rb_entry(parent, struct btrfs_inode, rb_node);
 
 		if (inode->i_ino < entry->vfs_inode.i_ino)
-			p = &(*p)->rb_left;
+			p = &parent->rb_left;
 		else if (inode->i_ino > entry->vfs_inode.i_ino)
-			p = &(*p)->rb_right;
+			p = &parent->rb_right;
 		else {
 			WARN_ON(!(entry->vfs_inode.i_state &
 				  (I_WILL_FREE | I_FREEING | I_CLEAR)));
-			break;
+			rb_erase(parent, &root->inode_tree);
+			RB_CLEAR_NODE(parent);
+			spin_unlock(&root->inode_lock);
+			goto again;
 		}
 	}
 	rb_link_node(&BTRFS_I(inode)->rb_node, parent, p);
@@ -3127,12 +3133,12 @@ static void inode_tree_del(struct inode *inode)
 {
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 
+	spin_lock(&root->inode_lock);
 	if (!RB_EMPTY_NODE(&BTRFS_I(inode)->rb_node)) {
-		spin_lock(&root->inode_lock);
 		rb_erase(&BTRFS_I(inode)->rb_node, &root->inode_tree);
-		spin_unlock(&root->inode_lock);
 		RB_CLEAR_NODE(&BTRFS_I(inode)->rb_node);
 	}
+	spin_unlock(&root->inode_lock);
 }
 
 static noinline void init_btrfs_i(struct inode *inode)
@@ -3580,12 +3586,6 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans,
 		owner = 1;
 	BTRFS_I(inode)->block_group =
 			btrfs_find_block_group(root, 0, alloc_hint, owner);
-	if ((mode & S_IFREG)) {
-		if (btrfs_test_opt(root, NODATASUM))
-			BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM;
-		if (btrfs_test_opt(root, NODATACOW))
-			BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW;
-	}
 
 	key[0].objectid = objectid;
 	btrfs_set_key_type(&key[0], BTRFS_INODE_ITEM_KEY);
@@ -3640,6 +3640,13 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans,
 
 	btrfs_inherit_iflags(inode, dir);
 
+	if ((mode & S_IFREG)) {
+		if (btrfs_test_opt(root, NODATASUM))
+			BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM;
+		if (btrfs_test_opt(root, NODATACOW))
+			BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW;
+	}
+
 	insert_inode_hash(inode);
 	inode_tree_add(inode);
 	return inode;
@@ -4785,8 +4792,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	 * and the replacement file is large.  Start IO on it now so
 	 * we don't add too much work to the end of the transaction
 	 */
-	if (new_inode && old_inode && S_ISREG(old_inode->i_mode) &&
-	    new_inode->i_size &&
+	if (new_inode && S_ISREG(old_inode->i_mode) && new_inode->i_size &&
 	    old_inode->i_size > BTRFS_ORDERED_OPERATIONS_FLUSH_LIMIT)
 		filemap_flush(old_inode->i_mapping);
 
@@ -5082,6 +5088,7 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 	u64 mask = BTRFS_I(inode)->root->sectorsize - 1;
 	struct extent_map *em;
 	struct btrfs_trans_handle *trans;
+	struct btrfs_root *root;
 	int ret;
 
 	alloc_start = offset & ~mask;
@@ -5100,6 +5107,13 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 			goto out;
 	}
 
+	root = BTRFS_I(inode)->root;
+
+	ret = btrfs_check_data_free_space(root, inode,
+					  alloc_end - alloc_start);
+	if (ret)
+		goto out;
+
 	locked_end = alloc_end - 1;
 	while (1) {
 		struct btrfs_ordered_extent *ordered;
@@ -5107,7 +5121,7 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 		trans = btrfs_start_transaction(BTRFS_I(inode)->root, 1);
 		if (!trans) {
 			ret = -EIO;
-			goto out;
+			goto out_free;
 		}
 
 		/* the extent lock is ordered inside the running
@@ -5168,6 +5182,8 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 		      GFP_NOFS);
 
 	btrfs_end_transaction(trans, BTRFS_I(inode)->root);
+out_free:
+	btrfs_free_reserved_data_space(root, inode, alloc_end - alloc_start);
 out:
 	mutex_unlock(&inode->i_mutex);
 	return ret;
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index eff18f5b536..bd88f25889f 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -27,7 +27,6 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/string.h>
-#include <linux/smp_lock.h>
 #include <linux/backing-dev.h>
 #include <linux/mount.h>
 #include <linux/mpage.h>
@@ -1028,7 +1027,8 @@ static long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
 						struct btrfs_file_extent_item);
 			comp = btrfs_file_extent_compression(leaf, extent);
 			type = btrfs_file_extent_type(leaf, extent);
-			if (type == BTRFS_FILE_EXTENT_REG) {
+			if (type == BTRFS_FILE_EXTENT_REG ||
+			    type == BTRFS_FILE_EXTENT_PREALLOC) {
 				disko = btrfs_file_extent_disk_bytenr(leaf,
 								      extent);
 				diskl = btrfs_file_extent_disk_num_bytes(leaf,
@@ -1051,7 +1051,8 @@ static long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
 			new_key.objectid = inode->i_ino;
 			new_key.offset = key.offset + destoff - off;
 
-			if (type == BTRFS_FILE_EXTENT_REG) {
+			if (type == BTRFS_FILE_EXTENT_REG ||
+			    type == BTRFS_FILE_EXTENT_PREALLOC) {
 				ret = btrfs_insert_empty_item(trans, root, path,
 							      &new_key, size);
 				if (ret)
diff --git a/fs/btrfs/print-tree.c b/fs/btrfs/print-tree.c
index 6d6523da0a3..0d126be22b6 100644
--- a/fs/btrfs/print-tree.c
+++ b/fs/btrfs/print-tree.c
@@ -309,7 +309,7 @@ void btrfs_print_tree(struct btrfs_root *root, struct extent_buffer *c)
 	}
 	printk(KERN_INFO "node %llu level %d total ptrs %d free spc %u\n",
 	       (unsigned long long)btrfs_header_bytenr(c),
-	       btrfs_header_level(c), nr,
+	      level, nr,
 	       (u32)BTRFS_NODEPTRS_PER_BLOCK(root) - nr);
 	for (i = 0; i < nr; i++) {
 		btrfs_node_key_to_cpu(c, &key, i);
@@ -326,10 +326,10 @@ void btrfs_print_tree(struct btrfs_root *root, struct extent_buffer *c)
 					btrfs_level_size(root, level - 1),
 					btrfs_node_ptr_generation(c, i));
 		if (btrfs_is_leaf(next) &&
-		    btrfs_header_level(c) != 1)
+		   level != 1)
 			BUG();
 		if (btrfs_header_level(next) !=
-			btrfs_header_level(c) - 1)
+		       level - 1)
 			BUG();
 		btrfs_print_tree(root, next);
 		free_extent_buffer(next);
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index b23dc209ae1..c04f7f21260 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -670,6 +670,8 @@ again:
 			err = ret;
 			goto out;
 		}
+		if (ret > 0 && path2->slots[level] > 0)
+			path2->slots[level]--;
 
 		eb = path2->nodes[level];
 		WARN_ON(btrfs_node_blockptr(eb, path2->slots[level]) !=
@@ -1609,6 +1611,7 @@ static noinline_for_stack int merge_reloc_root(struct reloc_control *rc,
 		BUG_ON(level == 0);
 		path->lowest_level = level;
 		ret = btrfs_search_slot(NULL, reloc_root, &key, path, 0, 0);
+		path->lowest_level = 0;
 		if (ret < 0) {
 			btrfs_free_path(path);
 			return ret;
@@ -1788,7 +1791,7 @@ static void merge_func(struct btrfs_work *work)
 		btrfs_end_transaction(trans, root);
 	}
 
-	btrfs_drop_dead_root(reloc_root);
+	btrfs_drop_snapshot(reloc_root, 0);
 
 	if (atomic_dec_and_test(async->num_pending))
 		complete(async->done);
@@ -2075,9 +2078,6 @@ static int do_relocation(struct btrfs_trans_handle *trans,
 
 			ret = btrfs_drop_subtree(trans, root, eb, upper->eb);
 			BUG_ON(ret);
-
-			btrfs_tree_unlock(eb);
-			free_extent_buffer(eb);
 		}
 		if (!lowest) {
 			btrfs_tree_unlock(upper->eb);
@@ -2553,8 +2553,13 @@ int relocate_inode_pages(struct inode *inode, u64 start, u64 len)
 	last_index = (start + len - 1) >> PAGE_CACHE_SHIFT;
 
 	/* make sure the dirty trick played by the caller work */
-	ret = invalidate_inode_pages2_range(inode->i_mapping,
-					    first_index, last_index);
+	while (1) {
+		ret = invalidate_inode_pages2_range(inode->i_mapping,
+						    first_index, last_index);
+		if (ret != -EBUSY)
+			break;
+		schedule_timeout(HZ/10);
+	}
 	if (ret)
 		goto out_unlock;
 
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 9f179d4832d..6d6d06cb6df 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -26,7 +26,6 @@
 #include <linux/init.h>
 #include <linux/seq_file.h>
 #include <linux/string.h>
-#include <linux/smp_lock.h>
 #include <linux/backing-dev.h>
 #include <linux/mount.h>
 #include <linux/mpage.h>
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 4e83457ea25..cdbb5022da5 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -40,6 +40,12 @@ static noinline void put_transaction(struct btrfs_transaction *transaction)
 	}
 }
 
+static noinline void switch_commit_root(struct btrfs_root *root)
+{
+	free_extent_buffer(root->commit_root);
+	root->commit_root = btrfs_root_node(root);
+}
+
 /*
  * either allocate a new transaction or hop into the existing one
  */
@@ -444,9 +450,6 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans,
 
 	btrfs_write_dirty_block_groups(trans, root);
 
-	ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
-	BUG_ON(ret);
-
 	while (1) {
 		old_root_bytenr = btrfs_root_bytenr(&root->root_item);
 		if (old_root_bytenr == root->node->start)
@@ -457,13 +460,14 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans,
 					&root->root_key,
 					&root->root_item);
 		BUG_ON(ret);
-		btrfs_write_dirty_block_groups(trans, root);
 
-		ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
+		ret = btrfs_write_dirty_block_groups(trans, root);
 		BUG_ON(ret);
 	}
-	free_extent_buffer(root->commit_root);
-	root->commit_root = btrfs_root_node(root);
+
+	if (root != root->fs_info->extent_root)
+		switch_commit_root(root);
+
 	return 0;
 }
 
@@ -495,10 +499,12 @@ static noinline int commit_cowonly_roots(struct btrfs_trans_handle *trans,
 		root = list_entry(next, struct btrfs_root, dirty_list);
 
 		update_cowonly_root(trans, root);
-
-		ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
-		BUG_ON(ret);
 	}
+
+	down_write(&fs_info->extent_commit_sem);
+	switch_commit_root(fs_info->extent_root);
+	up_write(&fs_info->extent_commit_sem);
+
 	return 0;
 }
 
@@ -544,8 +550,7 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans,
 			btrfs_update_reloc_root(trans, root);
 
 			if (root->commit_root != root->node) {
-				free_extent_buffer(root->commit_root);
-				root->commit_root = btrfs_root_node(root);
+				switch_commit_root(root);
 				btrfs_set_root_node(&root->root_item,
 						    root->node);
 			}
@@ -593,6 +598,7 @@ int btrfs_defrag_root(struct btrfs_root *root, int cacheonly)
 	return 0;
 }
 
+#if 0
 /*
  * when dropping snapshots, we generate a ton of delayed refs, and it makes
  * sense not to join the transaction while it is trying to flush the current
@@ -681,6 +687,7 @@ int btrfs_drop_dead_root(struct btrfs_root *root)
 	btrfs_btree_balance_dirty(tree_root, nr);
 	return ret;
 }
+#endif
 
 /*
  * new snapshots need to be created at a very specific time in the
@@ -850,6 +857,16 @@ static void update_super_roots(struct btrfs_root *root)
 	super->root_level = root_item->level;
 }
 
+int btrfs_transaction_in_commit(struct btrfs_fs_info *info)
+{
+	int ret = 0;
+	spin_lock(&info->new_trans_lock);
+	if (info->running_transaction)
+		ret = info->running_transaction->in_commit;
+	spin_unlock(&info->new_trans_lock);
+	return ret;
+}
+
 int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 			     struct btrfs_root *root)
 {
@@ -941,9 +958,11 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 
 		mutex_unlock(&root->fs_info->trans_mutex);
 
-		if (flush_on_commit || snap_pending) {
-			if (flush_on_commit)
-				btrfs_start_delalloc_inodes(root);
+		if (flush_on_commit) {
+			btrfs_start_delalloc_inodes(root);
+			ret = btrfs_wait_ordered_extents(root, 0);
+			BUG_ON(ret);
+		} else if (snap_pending) {
 			ret = btrfs_wait_ordered_extents(root, 1);
 			BUG_ON(ret);
 		}
@@ -1007,15 +1026,11 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 
 	btrfs_set_root_node(&root->fs_info->tree_root->root_item,
 			    root->fs_info->tree_root->node);
-	free_extent_buffer(root->fs_info->tree_root->commit_root);
-	root->fs_info->tree_root->commit_root =
-				btrfs_root_node(root->fs_info->tree_root);
+	switch_commit_root(root->fs_info->tree_root);
 
 	btrfs_set_root_node(&root->fs_info->chunk_root->root_item,
 			    root->fs_info->chunk_root->node);
-	free_extent_buffer(root->fs_info->chunk_root->commit_root);
-	root->fs_info->chunk_root->commit_root =
-				btrfs_root_node(root->fs_info->chunk_root);
+	switch_commit_root(root->fs_info->chunk_root);
 
 	update_super_roots(root);
 
@@ -1055,6 +1070,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 	cur_trans->commit_done = 1;
 
 	root->fs_info->last_trans_committed = cur_trans->transid;
+
 	wake_up(&cur_trans->commit_wait);
 
 	put_transaction(cur_trans);
@@ -1081,7 +1097,7 @@ int btrfs_clean_old_snapshots(struct btrfs_root *root)
 	while (!list_empty(&list)) {
 		root = list_entry(list.next, struct btrfs_root, root_list);
 		list_del_init(&root->root_list);
-		btrfs_drop_dead_root(root);
+		btrfs_drop_snapshot(root, 0);
 	}
 	return 0;
 }
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index 961c3ee5a2e..663c6740491 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -107,4 +107,5 @@ int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
 				struct btrfs_root *root);
 int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
 					struct extent_io_tree *dirty_pages);
+int btrfs_transaction_in_commit(struct btrfs_fs_info *info);
 #endif
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index c13922206d1..d91b0de7c50 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -797,7 +797,7 @@ static noinline int add_inode_ref(struct btrfs_trans_handle *trans,
 		return -ENOENT;
 
 	inode = read_one_inode(root, key->objectid);
-	BUG_ON(!dir);
+	BUG_ON(!inode);
 
 	ref_ptr = btrfs_item_ptr_offset(eb, slot);
 	ref_end = ref_ptr + btrfs_item_size_nr(eb, slot);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 3ab80e9cd76..5dbefd11b4a 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -721,7 +721,8 @@ error:
  */
 static noinline int find_free_dev_extent(struct btrfs_trans_handle *trans,
 					 struct btrfs_device *device,
-					 u64 num_bytes, u64 *start)
+					 u64 num_bytes, u64 *start,
+					 u64 *max_avail)
 {
 	struct btrfs_key key;
 	struct btrfs_root *root = device->dev_root;
@@ -758,9 +759,13 @@ static noinline int find_free_dev_extent(struct btrfs_trans_handle *trans,
 	ret = btrfs_search_slot(trans, root, &key, path, 0, 0);
 	if (ret < 0)
 		goto error;
-	ret = btrfs_previous_item(root, path, 0, key.type);
-	if (ret < 0)
-		goto error;
+	if (ret > 0) {
+		ret = btrfs_previous_item(root, path, key.objectid, key.type);
+		if (ret < 0)
+			goto error;
+		if (ret > 0)
+			start_found = 1;
+	}
 	l = path->nodes[0];
 	btrfs_item_key_to_cpu(l, &key, path->slots[0]);
 	while (1) {
@@ -803,6 +808,10 @@ no_more_items:
 			if (last_byte < search_start)
 				last_byte = search_start;
 			hole_size = key.offset - last_byte;
+
+			if (hole_size > *max_avail)
+				*max_avail = hole_size;
+
 			if (key.offset > last_byte &&
 			    hole_size >= num_bytes) {
 				*start = last_byte;
@@ -1621,6 +1630,7 @@ static int __btrfs_grow_device(struct btrfs_trans_handle *trans,
 	device->fs_devices->total_rw_bytes += diff;
 
 	device->total_bytes = new_size;
+	device->disk_total_bytes = new_size;
 	btrfs_clear_space_info_full(device->dev_root->fs_info);
 
 	return btrfs_update_device(trans, device);
@@ -2007,7 +2017,7 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size)
 			goto done;
 		if (ret) {
 			ret = 0;
-			goto done;
+			break;
 		}
 
 		l = path->nodes[0];
@@ -2015,7 +2025,7 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size)
 		btrfs_item_key_to_cpu(l, &key, path->slots[0]);
 
 		if (key.objectid != device->devid)
-			goto done;
+			break;
 
 		dev_extent = btrfs_item_ptr(l, slot, struct btrfs_dev_extent);
 		length = btrfs_dev_extent_length(l, dev_extent);
@@ -2171,6 +2181,7 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans,
 			     max_chunk_size);
 
 again:
+	max_avail = 0;
 	if (!map || map->num_stripes != num_stripes) {
 		kfree(map);
 		map = kmalloc(map_lookup_size(num_stripes), GFP_NOFS);
@@ -2219,7 +2230,8 @@ again:
 
 		if (device->in_fs_metadata && avail >= min_free) {
 			ret = find_free_dev_extent(trans, device,
-						   min_free, &dev_offset);
+						   min_free, &dev_offset,
+						   &max_avail);
 			if (ret == 0) {
 				list_move_tail(&device->dev_alloc_list,
 					       &private_devs);
@@ -2795,26 +2807,6 @@ int btrfs_rmap_block(struct btrfs_mapping_tree *map_tree,
 		}
 	}
 
-	for (i = 0; i > nr; i++) {
-		struct btrfs_multi_bio *multi;
-		struct btrfs_bio_stripe *stripe;
-		int ret;
-
-		length = 1;
-		ret = btrfs_map_block(map_tree, WRITE, buf[i],
-				      &length, &multi, 0);
-		BUG_ON(ret);
-
-		stripe = multi->stripes;
-		for (j = 0; j < multi->num_stripes; j++) {
-			if (stripe->physical >= physical &&
-			    physical < stripe->physical + length)
-				break;
-		}
-		BUG_ON(j >= multi->num_stripes);
-		kfree(multi);
-	}
-
 	*logical = buf;
 	*naddrs = nr;
 	*stripe_len = map->stripe_len;
diff --git a/fs/btrfs/zlib.c b/fs/btrfs/zlib.c
index ecfbce836d3..3e2b90eaa23 100644
--- a/fs/btrfs/zlib.c
+++ b/fs/btrfs/zlib.c
@@ -208,7 +208,7 @@ int btrfs_zlib_compress_pages(struct address_space *mapping,
 	*total_in = 0;
 
 	workspace = find_zlib_workspace();
-	if (!workspace)
+	if (IS_ERR(workspace))
 		return -1;
 
 	if (Z_OK != zlib_deflateInit(&workspace->def_strm, 3)) {
@@ -366,7 +366,7 @@ int btrfs_zlib_decompress_biovec(struct page **pages_in,
 	char *kaddr;
 
 	workspace = find_zlib_workspace();
-	if (!workspace)
+	if (IS_ERR(workspace))
 		return -ENOMEM;
 
 	data_in = kmap(pages_in[page_in_index]);
@@ -547,7 +547,7 @@ int btrfs_zlib_decompress(unsigned char *data_in,
 		return -ENOMEM;
 
 	workspace = find_zlib_workspace();
-	if (!workspace)
+	if (IS_ERR(workspace))
 		return -ENOMEM;
 
 	workspace->inf_strm.next_in = data_in;
diff --git a/fs/buffer.c b/fs/buffer.c
index a3ef091a45b..28f320fac4d 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1165,8 +1165,11 @@ void mark_buffer_dirty(struct buffer_head *bh)
 
 	if (!test_set_buffer_dirty(bh)) {
 		struct page *page = bh->b_page;
-		if (!TestSetPageDirty(page))
-			__set_page_dirty(page, page_mapping(page), 0);
+		if (!TestSetPageDirty(page)) {
+			struct address_space *mapping = page_mapping(page);
+			if (mapping)
+				__set_page_dirty(page, mapping, 0);
+		}
 	}
 }
 
diff --git a/fs/char_dev.c b/fs/char_dev.c
index b7c9d5187a7..a173551e19d 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -13,7 +13,6 @@
 #include <linux/major.h>
 #include <linux/errno.h>
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/seq_file.h>
 
 #include <linux/kobject.h>
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index b4868983942..e85b1e4389e 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,10 @@
+Version 1.60
+-------------
+Fix memory leak in reconnect.  Fix oops in DFS mount error path.
+Set s_maxbytes to smaller (the max that vfs can handle) so that
+sendfile will now work over cifs mounts again.  Add noforcegid
+and noforceuid mount parameters.
+
 Version 1.59
 ------------
 Client uses server inode numbers (which are persistent) rather than
@@ -5,7 +12,11 @@ client generated ones by default (mount option "serverino" turned
 on by default if server supports it).  Add forceuid and forcegid
 mount options (so that when negotiating unix extensions specifying
 which uid mounted does not immediately force the server's reported
-uids to be overridden).
+uids to be overridden).  Add support for scope mount parm. Improve
+hard link detection to use same inode for both.  Do not set
+read-only dos attribute on directories (for chmod) since Windows
+explorer special cases this attribute bit for directories for
+a different purpose.
 
 Version 1.58
 ------------
diff --git a/fs/cifs/README b/fs/cifs/README
index ad92921dbde..79c1a93400b 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -262,11 +262,11 @@ A partial list of the supported mount options follows:
 		mount.	
   domain	Set the SMB/CIFS workgroup name prepended to the
 		username during CIFS session establishment
-  forceuid	Set the default uid for inodes based on the uid
-		passed in. For mounts to servers
+  forceuid	Set the default uid for inodes to the uid
+		passed in on mount. For mounts to servers
 		which do support the CIFS Unix extensions, such as a
 		properly configured Samba server, the server provides
-		the uid, gid and mode so this parameter should  not be
+		the uid, gid and mode so this parameter should not be
 		specified unless the server and clients uid and gid
 		numbering differ.  If the server and client are in the
 		same domain (e.g. running winbind or nss_ldap) and
@@ -278,11 +278,7 @@ A partial list of the supported mount options follows:
 		of existing files will be the uid (gid) of the person
 		who executed the mount (root, except when mount.cifs
 		is configured setuid for user mounts) unless the "uid=" 
-		(gid) mount option is specified.  For the uid (gid) of newly
-		created files and directories, ie files created since 
-		the last mount of the server share, the expected uid 
-		(gid) is cached as long as the inode remains in 
-		memory on the client.   Also note that permission
+		(gid) mount option is specified. Also note that permission
 		checks (authorization checks) on accesses to a file occur
 		at the server, but there are cases in which an administrator
 		may want to restrict at the client as well.  For those
@@ -290,12 +286,15 @@ A partial list of the supported mount options follows:
 		(such as Windows), permissions can also be checked at the
 		client, and a crude form of client side permission checking 
 		can be enabled by specifying file_mode and dir_mode on 
-		the client.  Note that the mount.cifs helper must be
-		at version 1.10 or higher to support specifying the uid
-		(or gid) in non-numeric form.
-  forcegid	(similar to above but for the groupid instead of uid)
+		the client.  (default)
+  forcegid	(similar to above but for the groupid instead of uid) (default)
+  noforceuid	Fill in file owner information (uid) by requesting it from
+		the server if possible. With this option, the value given in
+		the uid= option (on mount) will only be used if the server
+		can not support returning uids on inodes.
+  noforcegid	(similar to above but for the group owner, gid, instead of uid)
   uid		Set the default uid for inodes, and indicate to the
-		cifs kernel driver which local user mounted . If the server
+		cifs kernel driver which local user mounted. If the server
 		supports the unix extensions the default uid is
 		not used to fill in the owner fields of inodes (files)
 		unless the "forceuid" parameter is specified.
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index 1b09f167006..20692fbfdb2 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -49,6 +49,7 @@
 #define ASN1_OJI	6	/* Object Identifier  */
 #define ASN1_OJD	7	/* Object Description */
 #define ASN1_EXT	8	/* External */
+#define ASN1_ENUM	10	/* Enumerated */
 #define ASN1_SEQ	16	/* Sequence */
 #define ASN1_SET	17	/* Set */
 #define ASN1_NUMSTR	18	/* Numerical String */
@@ -78,10 +79,12 @@
 #define SPNEGO_OID_LEN 7
 #define NTLMSSP_OID_LEN  10
 #define KRB5_OID_LEN  7
+#define KRB5U2U_OID_LEN  8
 #define MSKRB5_OID_LEN  7
 static unsigned long SPNEGO_OID[7] = { 1, 3, 6, 1, 5, 5, 2 };
 static unsigned long NTLMSSP_OID[10] = { 1, 3, 6, 1, 4, 1, 311, 2, 2, 10 };
 static unsigned long KRB5_OID[7] = { 1, 2, 840, 113554, 1, 2, 2 };
+static unsigned long KRB5U2U_OID[8] = { 1, 2, 840, 113554, 1, 2, 2, 3 };
 static unsigned long MSKRB5_OID[7] = { 1, 2, 840, 48018, 1, 2, 2 };
 
 /*
@@ -122,6 +125,28 @@ asn1_octet_decode(struct asn1_ctx *ctx, unsigned char *ch)
 	return 1;
 }
 
+#if 0 /* will be needed later by spnego decoding/encoding of ntlmssp */
+static unsigned char
+asn1_enum_decode(struct asn1_ctx *ctx, __le32 *val)
+{
+	unsigned char ch;
+
+	if (ctx->pointer >= ctx->end) {
+		ctx->error = ASN1_ERR_DEC_EMPTY;
+		return 0;
+	}
+
+	ch = *(ctx->pointer)++; /* ch has 0xa, ptr points to lenght octet */
+	if ((ch) == ASN1_ENUM)  /* if ch value is ENUM, 0xa */
+		*val = *(++(ctx->pointer)); /* value has enum value */
+	else
+		return 0;
+
+	ctx->pointer++;
+	return 1;
+}
+#endif
+
 static unsigned char
 asn1_tag_decode(struct asn1_ctx *ctx, unsigned int *tag)
 {
@@ -476,10 +501,9 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 	unsigned int cls, con, tag, oidlen, rc;
 	bool use_ntlmssp = false;
 	bool use_kerberos = false;
+	bool use_kerberosu2u = false;
 	bool use_mskerberos = false;
 
-	*secType = NTLM; /* BB eventually make Kerberos or NLTMSSP the default*/
-
 	/* cifs_dump_mem(" Received SecBlob ", security_blob, length); */
 
 	asn1_open(&ctx, security_blob, length);
@@ -515,6 +539,7 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 		return 0;
 	}
 
+	/* SPNEGO */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding negTokenInit"));
 		return 0;
@@ -526,6 +551,7 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 		return 0;
 	}
 
+	/* negTokenInit */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding negTokenInit"));
 		return 0;
@@ -537,6 +563,7 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 		return 0;
 	}
 
+	/* sequence */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding 2nd part of negTokenInit"));
 		return 0;
@@ -548,6 +575,7 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 		return 0;
 	}
 
+	/* sequence of */
 	if (asn1_header_decode
 	    (&ctx, &sequence_end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding 2nd part of negTokenInit"));
@@ -560,6 +588,7 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 		return 0;
 	}
 
+	/* list of security mechanisms */
 	while (!asn1_eoc_decode(&ctx, sequence_end)) {
 		rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
 		if (!rc) {
@@ -576,11 +605,15 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 
 				if (compare_oid(oid, oidlen, MSKRB5_OID,
 						MSKRB5_OID_LEN) &&
-						!use_kerberos)
+						!use_mskerberos)
 					use_mskerberos = true;
+				else if (compare_oid(oid, oidlen, KRB5U2U_OID,
+						     KRB5U2U_OID_LEN) &&
+						     !use_kerberosu2u)
+					use_kerberosu2u = true;
 				else if (compare_oid(oid, oidlen, KRB5_OID,
 						     KRB5_OID_LEN) &&
-						     !use_mskerberos)
+						     !use_kerberos)
 					use_kerberos = true;
 				else if (compare_oid(oid, oidlen, NTLMSSP_OID,
 						     NTLMSSP_OID_LEN))
@@ -593,7 +626,12 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 		}
 	}
 
+	/* mechlistMIC */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		/* Check if we have reached the end of the blob, but with
+		   no mechListMic (e.g. NTLMSSP instead of KRB5) */
+		if (ctx.error == ASN1_ERR_DEC_EMPTY)
+			goto decode_negtoken_exit;
 		cFYI(1, ("Error decoding last part negTokenInit exit3"));
 		return 0;
 	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
@@ -602,6 +640,8 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 			 cls, con, tag, end, *end));
 		return 0;
 	}
+
+	/* sequence */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding last part negTokenInit exit5"));
 		return 0;
@@ -611,6 +651,7 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 			cls, con, tag, end, *end));
 	}
 
+	/* sequence of */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding last part negTokenInit exit 7"));
 		return 0;
@@ -619,6 +660,8 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 			 cls, con, tag, end, *end));
 		return 0;
 	}
+
+	/* general string */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding last part negTokenInit exit9"));
 		return 0;
@@ -630,13 +673,13 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 	}
 	cFYI(1, ("Need to call asn1_octets_decode() function for %s",
 		 ctx.pointer));	/* is this UTF-8 or ASCII? */
-
+decode_negtoken_exit:
 	if (use_kerberos)
 		*secType = Kerberos;
 	else if (use_mskerberos)
 		*secType = MSKerberos;
 	else if (use_ntlmssp)
-		*secType = NTLMSSP;
+		*secType = RawNTLMSSP;
 
 	return 1;
 }
diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index 7f19fefd3d4..42cec2a7c0c 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -261,6 +261,8 @@ static ssize_t cifs_stats_proc_write(struct file *file,
 					atomic_set(&tcon->num_reads, 0);
 					atomic_set(&tcon->num_oplock_brks, 0);
 					atomic_set(&tcon->num_opens, 0);
+					atomic_set(&tcon->num_posixopens, 0);
+					atomic_set(&tcon->num_posixmkdirs, 0);
 					atomic_set(&tcon->num_closes, 0);
 					atomic_set(&tcon->num_deletes, 0);
 					atomic_set(&tcon->num_mkdirs, 0);
@@ -347,11 +349,15 @@ static int cifs_stats_proc_show(struct seq_file *m, void *v)
 					atomic_read(&tcon->num_locks),
 					atomic_read(&tcon->num_hardlinks),
 					atomic_read(&tcon->num_symlinks));
-				seq_printf(m, "\nOpens: %d Closes: %d"
+				seq_printf(m, "\nOpens: %d Closes: %d "
 					      "Deletes: %d",
 					atomic_read(&tcon->num_opens),
 					atomic_read(&tcon->num_closes),
 					atomic_read(&tcon->num_deletes));
+				seq_printf(m, "\nPosix Opens: %d "
+					      "Posix Mkdirs: %d",
+					atomic_read(&tcon->num_posixopens),
+					atomic_read(&tcon->num_posixmkdirs));
 				seq_printf(m, "\nMkdirs: %d Rmdirs: %d",
 					atomic_read(&tcon->num_mkdirs),
 					atomic_read(&tcon->num_rmdirs));
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 3bb11be8b6a..606912d8f2a 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -55,7 +55,7 @@ void cifs_dfs_release_automount_timer(void)
  * i.e. strips from UNC trailing path that is not part of share
  * name and fixup missing '\' in the begining of DFS node refferal
  * if neccessary.
- * Returns pointer to share name on success or NULL on error.
+ * Returns pointer to share name on success or ERR_PTR on error.
  * Caller is responsible for freeing returned string.
  */
 static char *cifs_get_share_name(const char *node_name)
@@ -68,7 +68,7 @@ static char *cifs_get_share_name(const char *node_name)
 	UNC = kmalloc(len+2 /*for term null and additional \ if it's missed */,
 			 GFP_KERNEL);
 	if (!UNC)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	/* get share name and server name */
 	if (node_name[1] != '\\') {
@@ -87,7 +87,7 @@ static char *cifs_get_share_name(const char *node_name)
 		cERROR(1, ("%s: no server name end in node name: %s",
 			__func__, node_name));
 		kfree(UNC);
-		return NULL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	/* find sharename end */
@@ -133,6 +133,12 @@ char *cifs_compose_mount_options(const char *sb_mountdata,
 		return ERR_PTR(-EINVAL);
 
 	*devname = cifs_get_share_name(ref->node_name);
+	if (IS_ERR(*devname)) {
+		rc = PTR_ERR(*devname);
+		*devname = NULL;
+		goto compose_mount_options_err;
+	}
+
 	rc = dns_resolve_server_name_to_ip(*devname, &srvIP);
 	if (rc != 0) {
 		cERROR(1, ("%s: Failed to resolve server part of %s to IP: %d",
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 4a4581cb2b5..051caecf7d6 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -86,6 +86,9 @@ struct key_type cifs_spnego_key_type = {
 /* strlen of ";user=" */
 #define USER_KEY_LEN		6
 
+/* strlen of ";pid=0x" */
+#define PID_KEY_LEN		7
+
 /* get a key struct with a SPNEGO security blob, suitable for session setup */
 struct key *
 cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
@@ -103,7 +106,8 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
 		   IP_KEY_LEN + INET6_ADDRSTRLEN +
 		   MAX_MECH_STR_LEN +
 		   UID_KEY_LEN + (sizeof(uid_t) * 2) +
-		   USER_KEY_LEN + strlen(sesInfo->userName) + 1;
+		   USER_KEY_LEN + strlen(sesInfo->userName) +
+		   PID_KEY_LEN + (sizeof(pid_t) * 2) + 1;
 
 	spnego_key = ERR_PTR(-ENOMEM);
 	description = kzalloc(desc_len, GFP_KERNEL);
@@ -141,6 +145,9 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
 	dp = description + strlen(description);
 	sprintf(dp, ";user=%s", sesInfo->userName);
 
+	dp = description + strlen(description);
+	sprintf(dp, ";pid=0x%x", current->pid);
+
 	cFYI(1, ("key description = %s", description));
 	spnego_key = request_key(&cifs_spnego_key_type, description, "");
 
diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 60e3c4253de..714a542cbaf 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -44,7 +44,7 @@ cifs_ucs2_bytes(const __le16 *from, int maxbytes,
 	int maxwords = maxbytes / 2;
 	char tmp[NLS_MAX_CHARSET_SIZE];
 
-	for (i = 0; from[i] && i < maxwords; i++) {
+	for (i = 0; i < maxwords && from[i]; i++) {
 		charlen = codepage->uni2char(le16_to_cpu(from[i]), tmp,
 					     NLS_MAX_CHARSET_SIZE);
 		if (charlen > 0)
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index 1403b5d86a7..6941c22398a 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -327,7 +327,7 @@ static void dump_ace(struct cifs_ace *pace, char *end_of_acl)
 
 static void parse_dacl(struct cifs_acl *pdacl, char *end_of_acl,
 		       struct cifs_sid *pownersid, struct cifs_sid *pgrpsid,
-		       struct inode *inode)
+		       struct cifs_fattr *fattr)
 {
 	int i;
 	int num_aces = 0;
@@ -340,7 +340,7 @@ static void parse_dacl(struct cifs_acl *pdacl, char *end_of_acl,
 	if (!pdacl) {
 		/* no DACL in the security descriptor, set
 		   all the permissions for user/group/other */
-		inode->i_mode |= S_IRWXUGO;
+		fattr->cf_mode |= S_IRWXUGO;
 		return;
 	}
 
@@ -357,7 +357,7 @@ static void parse_dacl(struct cifs_acl *pdacl, char *end_of_acl,
 	/* reset rwx permissions for user/group/other.
 	   Also, if num_aces is 0 i.e. DACL has no ACEs,
 	   user/group/other have no permissions */
-	inode->i_mode &= ~(S_IRWXUGO);
+	fattr->cf_mode &= ~(S_IRWXUGO);
 
 	acl_base = (char *)pdacl;
 	acl_size = sizeof(struct cifs_acl);
@@ -379,17 +379,17 @@ static void parse_dacl(struct cifs_acl *pdacl, char *end_of_acl,
 			if (compare_sids(&(ppace[i]->sid), pownersid))
 				access_flags_to_mode(ppace[i]->access_req,
 						     ppace[i]->type,
-						     &(inode->i_mode),
+						     &fattr->cf_mode,
 						     &user_mask);
 			if (compare_sids(&(ppace[i]->sid), pgrpsid))
 				access_flags_to_mode(ppace[i]->access_req,
 						     ppace[i]->type,
-						     &(inode->i_mode),
+						     &fattr->cf_mode,
 						     &group_mask);
 			if (compare_sids(&(ppace[i]->sid), &sid_everyone))
 				access_flags_to_mode(ppace[i]->access_req,
 						     ppace[i]->type,
-						     &(inode->i_mode),
+						     &fattr->cf_mode,
 						     &other_mask);
 
 /*			memcpy((void *)(&(cifscred->aces[i])),
@@ -464,7 +464,7 @@ static int parse_sid(struct cifs_sid *psid, char *end_of_acl)
 
 /* Convert CIFS ACL to POSIX form */
 static int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len,
-			  struct inode *inode)
+			  struct cifs_fattr *fattr)
 {
 	int rc;
 	struct cifs_sid *owner_sid_ptr, *group_sid_ptr;
@@ -472,7 +472,7 @@ static int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len,
 	char *end_of_acl = ((char *)pntsd) + acl_len;
 	__u32 dacloffset;
 
-	if ((inode == NULL) || (pntsd == NULL))
+	if (pntsd == NULL)
 		return -EIO;
 
 	owner_sid_ptr = (struct cifs_sid *)((char *)pntsd +
@@ -497,7 +497,7 @@ static int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len,
 
 	if (dacloffset)
 		parse_dacl(dacl_ptr, end_of_acl, owner_sid_ptr,
-			   group_sid_ptr, inode);
+			   group_sid_ptr, fattr);
 	else
 		cFYI(1, ("no ACL")); /* BB grant all or default perms? */
 
@@ -508,7 +508,6 @@ static int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len,
 	memcpy((void *)(&(cifscred->gsid)), (void *)group_sid_ptr,
 			sizeof(struct cifs_sid)); */
 
-
 	return 0;
 }
 
@@ -671,8 +670,9 @@ static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
 }
 
 /* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */
-void acl_to_uid_mode(struct cifs_sb_info *cifs_sb, struct inode *inode,
-		     const char *path, const __u16 *pfid)
+void
+cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr,
+		  struct inode *inode, const char *path, const __u16 *pfid)
 {
 	struct cifs_ntsd *pntsd = NULL;
 	u32 acllen = 0;
@@ -687,7 +687,7 @@ void acl_to_uid_mode(struct cifs_sb_info *cifs_sb, struct inode *inode,
 
 	/* if we can retrieve the ACL, now parse Access Control Entries, ACEs */
 	if (pntsd)
-		rc = parse_sec_desc(pntsd, acllen, inode);
+		rc = parse_sec_desc(pntsd, acllen, fattr);
 	if (rc)
 		cFYI(1, ("parse sec desc failed rc = %d", rc));
 
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 0d92114195a..84b75253b05 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -308,7 +308,6 @@ cifs_alloc_inode(struct super_block *sb)
 	if (!cifs_inode)
 		return NULL;
 	cifs_inode->cifsAttrs = 0x20;	/* default */
-	atomic_set(&cifs_inode->inUse, 0);
 	cifs_inode->time = 0;
 	cifs_inode->write_behind_rc = 0;
 	/* Until the file is open and we have gotten oplock
@@ -333,6 +332,27 @@ cifs_destroy_inode(struct inode *inode)
 	kmem_cache_free(cifs_inode_cachep, CIFS_I(inode));
 }
 
+static void
+cifs_show_address(struct seq_file *s, struct TCP_Server_Info *server)
+{
+	seq_printf(s, ",addr=");
+
+	switch (server->addr.sockAddr.sin_family) {
+	case AF_INET:
+		seq_printf(s, "%pI4", &server->addr.sockAddr.sin_addr.s_addr);
+		break;
+	case AF_INET6:
+		seq_printf(s, "%pI6",
+			   &server->addr.sockAddr6.sin6_addr.s6_addr);
+		if (server->addr.sockAddr6.sin6_scope_id)
+			seq_printf(s, "%%%u",
+				   server->addr.sockAddr6.sin6_scope_id);
+		break;
+	default:
+		seq_printf(s, "(unknown)");
+	}
+}
+
 /*
  * cifs_show_options() is for displaying mount options in /proc/mounts.
  * Not all settable options are displayed but most of the important
@@ -343,83 +363,68 @@ cifs_show_options(struct seq_file *s, struct vfsmount *m)
 {
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *tcon;
-	struct TCP_Server_Info *server;
 
 	cifs_sb = CIFS_SB(m->mnt_sb);
+	tcon = cifs_sb->tcon;
 
-	if (cifs_sb) {
-		tcon = cifs_sb->tcon;
-		if (tcon) {
-			seq_printf(s, ",unc=%s", cifs_sb->tcon->treeName);
-			if (tcon->ses) {
-				if (tcon->ses->userName)
-					seq_printf(s, ",username=%s",
-					   tcon->ses->userName);
-				if (tcon->ses->domainName)
-					seq_printf(s, ",domain=%s",
-					   tcon->ses->domainName);
-				server = tcon->ses->server;
-				if (server) {
-					seq_printf(s, ",addr=");
-					switch (server->addr.sockAddr6.
-						sin6_family) {
-					case AF_INET6:
-						seq_printf(s, "%pI6",
-							   &server->addr.sockAddr6.sin6_addr);
-						break;
-					case AF_INET:
-						seq_printf(s, "%pI4",
-							   &server->addr.sockAddr.sin_addr.s_addr);
-						break;
-					}
-				}
-			}
-			if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID) ||
-			   !(tcon->unix_ext))
-				seq_printf(s, ",uid=%d", cifs_sb->mnt_uid);
-			if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) ||
-			   !(tcon->unix_ext))
-				seq_printf(s, ",gid=%d", cifs_sb->mnt_gid);
-			if (!tcon->unix_ext) {
-				seq_printf(s, ",file_mode=0%o,dir_mode=0%o",
+	seq_printf(s, ",unc=%s", cifs_sb->tcon->treeName);
+	if (tcon->ses->userName)
+		seq_printf(s, ",username=%s", tcon->ses->userName);
+	if (tcon->ses->domainName)
+		seq_printf(s, ",domain=%s", tcon->ses->domainName);
+
+	seq_printf(s, ",uid=%d", cifs_sb->mnt_uid);
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID)
+		seq_printf(s, ",forceuid");
+	else
+		seq_printf(s, ",noforceuid");
+
+	seq_printf(s, ",gid=%d", cifs_sb->mnt_gid);
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID)
+		seq_printf(s, ",forcegid");
+	else
+		seq_printf(s, ",noforcegid");
+
+	cifs_show_address(s, tcon->ses->server);
+
+	if (!tcon->unix_ext)
+		seq_printf(s, ",file_mode=0%o,dir_mode=0%o",
 					   cifs_sb->mnt_file_mode,
 					   cifs_sb->mnt_dir_mode);
-			}
-			if (tcon->seal)
-				seq_printf(s, ",seal");
-			if (tcon->nocase)
-				seq_printf(s, ",nocase");
-			if (tcon->retry)
-				seq_printf(s, ",hard");
-		}
-		if (cifs_sb->prepath)
-			seq_printf(s, ",prepath=%s", cifs_sb->prepath);
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
-			seq_printf(s, ",posixpaths");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)
-			seq_printf(s, ",setuids");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
-			seq_printf(s, ",serverino");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
-			seq_printf(s, ",directio");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
-			seq_printf(s, ",nouser_xattr");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
-			seq_printf(s, ",mapchars");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
-			seq_printf(s, ",sfu");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
-			seq_printf(s, ",nobrl");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
-			seq_printf(s, ",cifsacl");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
-			seq_printf(s, ",dynperm");
-		if (m->mnt_sb->s_flags & MS_POSIXACL)
-			seq_printf(s, ",acl");
-
-		seq_printf(s, ",rsize=%d", cifs_sb->rsize);
-		seq_printf(s, ",wsize=%d", cifs_sb->wsize);
-	}
+	if (tcon->seal)
+		seq_printf(s, ",seal");
+	if (tcon->nocase)
+		seq_printf(s, ",nocase");
+	if (tcon->retry)
+		seq_printf(s, ",hard");
+	if (cifs_sb->prepath)
+		seq_printf(s, ",prepath=%s", cifs_sb->prepath);
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
+		seq_printf(s, ",posixpaths");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)
+		seq_printf(s, ",setuids");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+		seq_printf(s, ",serverino");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
+		seq_printf(s, ",directio");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
+		seq_printf(s, ",nouser_xattr");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
+		seq_printf(s, ",mapchars");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
+		seq_printf(s, ",sfu");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
+		seq_printf(s, ",nobrl");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
+		seq_printf(s, ",cifsacl");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
+		seq_printf(s, ",dynperm");
+	if (m->mnt_sb->s_flags & MS_POSIXACL)
+		seq_printf(s, ",acl");
+
+	seq_printf(s, ",rsize=%d", cifs_sb->rsize);
+	seq_printf(s, ",wsize=%d", cifs_sb->wsize);
+
 	return 0;
 }
 
@@ -535,9 +540,14 @@ static void cifs_umount_begin(struct super_block *sb)
 	if (tcon == NULL)
 		return;
 
-	lock_kernel();
 	read_lock(&cifs_tcp_ses_lock);
-	if (tcon->tc_count == 1)
+	if ((tcon->tc_count > 1) || (tcon->tidStatus == CifsExiting)) {
+		/* we have other mounts to same share or we have
+		   already tried to force umount this and woken up
+		   all waiting network requests, nothing to do */
+		read_unlock(&cifs_tcp_ses_lock);
+		return;
+	} else if (tcon->tc_count == 1)
 		tcon->tidStatus = CifsExiting;
 	read_unlock(&cifs_tcp_ses_lock);
 
@@ -552,9 +562,7 @@ static void cifs_umount_begin(struct super_block *sb)
 		wake_up_all(&tcon->ses->server->response_q);
 		msleep(1);
 	}
-/* BB FIXME - finish add checks for tidStatus BB */
 
-	unlock_kernel();
 	return;
 }
 
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 9570a0e8023..6c170948300 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -24,6 +24,19 @@
 
 #define ROOT_I 2
 
+/*
+ * ino_t is 32-bits on 32-bit arch. We have to squash the 64-bit value down
+ * so that it will fit.
+ */
+static inline ino_t
+cifs_uniqueid_to_ino_t(u64 fileid)
+{
+	ino_t ino = (ino_t) fileid;
+	if (sizeof(ino_t) < sizeof(u64))
+		ino ^= fileid >> (sizeof(u64)-sizeof(ino_t)) * 8;
+	return ino;
+}
+
 extern struct file_system_type cifs_fs_type;
 extern const struct address_space_operations cifs_addr_ops;
 extern const struct address_space_operations cifs_addr_ops_smallbuf;
@@ -100,5 +113,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
 extern const struct export_operations cifs_export_ops;
 #endif /* EXPERIMENTAL */
 
-#define CIFS_VERSION   "1.59"
+#define CIFS_VERSION   "1.60"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index a61ab772c6f..6084d6379c0 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -83,7 +83,7 @@ enum securityEnum {
 	NTLM,			/* Legacy NTLM012 auth with NTLM hash */
 	NTLMv2,			/* Legacy NTLM auth with NTLMv2 hash */
 	RawNTLMSSP,		/* NTLMSSP without SPNEGO, NTLMv2 hash */
-	NTLMSSP,		/* NTLMSSP via SPNEGO, NTLMv2 hash */
+/*	NTLMSSP, */ /* can use rawNTLMSSP instead of NTLMSSP via SPNEGO */
 	Kerberos,		/* Kerberos via SPNEGO */
 	MSKerberos,		/* MS Kerberos via SPNEGO */
 };
@@ -260,6 +260,8 @@ struct cifsTconInfo {
 	atomic_t num_closes;
 	atomic_t num_deletes;
 	atomic_t num_mkdirs;
+	atomic_t num_posixopens;
+	atomic_t num_posixmkdirs;
 	atomic_t num_rmdirs;
 	atomic_t num_renames;
 	atomic_t num_t2renames;
@@ -364,13 +366,13 @@ struct cifsInodeInfo {
 	struct list_head openFileList;
 	int write_behind_rc;
 	__u32 cifsAttrs; /* e.g. DOS archive bit, sparse, compressed, system */
-	atomic_t inUse;	 /* num concurrent users (local openers cifs) of file*/
 	unsigned long time;	/* jiffies of last update/check of inode */
 	bool clientCanCacheRead:1;	/* read oplock */
 	bool clientCanCacheAll:1;	/* read and writebehind oplock */
 	bool oplockPending:1;
 	bool delete_pending:1;		/* DELETE_ON_CLOSE is set */
 	u64  server_eof;		/* current file size on server */
+	u64  uniqueid;			/* server inode number */
 	struct inode vfs_inode;
 };
 
@@ -472,6 +474,32 @@ struct dfs_info3_param {
 	char *node_name;
 };
 
+/*
+ * common struct for holding inode info when searching for or updating an
+ * inode with new info
+ */
+
+#define CIFS_FATTR_DFS_REFERRAL		0x1
+#define CIFS_FATTR_DELETE_PENDING	0x2
+#define CIFS_FATTR_NEED_REVAL		0x4
+
+struct cifs_fattr {
+	u32		cf_flags;
+	u32		cf_cifsattrs;
+	u64		cf_uniqueid;
+	u64		cf_eof;
+	u64		cf_bytes;
+	uid_t		cf_uid;
+	gid_t		cf_gid;
+	umode_t		cf_mode;
+	dev_t		cf_rdev;
+	unsigned int	cf_nlink;
+	unsigned int	cf_dtype;
+	struct timespec	cf_atime;
+	struct timespec	cf_mtime;
+	struct timespec	cf_ctime;
+};
+
 static inline void free_dfs_info_param(struct dfs_info3_param *param)
 {
 	if (param) {
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index a785f69dbc9..2d07f890a84 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -2328,19 +2328,7 @@ struct file_attrib_tag {
 typedef struct {
 	__le32 NextEntryOffset;
 	__u32 ResumeKey; /* as with FileIndex - no need to convert */
-	__le64 EndOfFile;
-	__le64 NumOfBytes;
-	__le64 LastStatusChange; /*SNIA specs DCE time for the 3 time fields */
-	__le64 LastAccessTime;
-	__le64 LastModificationTime;
-	__le64 Uid;
-	__le64 Gid;
-	__le32 Type;
-	__le64 DevMajor;
-	__le64 DevMinor;
-	__le64 UniqueId;
-	__le64 Permissions;
-	__le64 Nlinks;
+	FILE_UNIX_BASIC_INFO basic;
 	char FileName[1];
 } __attribute__((packed)) FILE_UNIX_INFO; /* level 0x202 */
 
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index f9452329bcc..da8fbf56599 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -74,7 +74,7 @@ extern unsigned int smbCalcSize(struct smb_hdr *ptr);
 extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
 extern int decode_negTokenInit(unsigned char *security_blob, int length,
 			enum securityEnum *secType);
-extern int cifs_inet_pton(const int, const char *source, void *dst);
+extern int cifs_convert_address(char *src, void *dst);
 extern int map_smb_to_linux_error(struct smb_hdr *smb, int logErr);
 extern void header_assemble(struct smb_hdr *, char /* command */ ,
 			    const struct cifsTconInfo *, int /* length of
@@ -98,9 +98,13 @@ extern struct timespec cnvrtDosUnixTm(__le16 le_date, __le16 le_time,
 extern int cifs_posix_open(char *full_path, struct inode **pinode,
 			   struct super_block *sb, int mode, int oflags,
 			   int *poplock, __u16 *pnetfid, int xid);
-extern void posix_fill_in_inode(struct inode *tmp_inode,
-				FILE_UNIX_BASIC_INFO *pData, int isNewInode);
-extern struct inode *cifs_new_inode(struct super_block *sb, __u64 *inum);
+extern void cifs_unix_basic_to_fattr(struct cifs_fattr *fattr,
+				     FILE_UNIX_BASIC_INFO *info,
+				     struct cifs_sb_info *cifs_sb);
+extern void cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr);
+extern struct inode *cifs_iget(struct super_block *sb,
+			       struct cifs_fattr *fattr);
+
 extern int cifs_get_inode_info(struct inode **pinode,
 			const unsigned char *search_path,
 			FILE_ALL_INFO *pfile_info,
@@ -108,8 +112,9 @@ extern int cifs_get_inode_info(struct inode **pinode,
 extern int cifs_get_inode_info_unix(struct inode **pinode,
 			const unsigned char *search_path,
 			struct super_block *sb, int xid);
-extern void acl_to_uid_mode(struct cifs_sb_info *cifs_sb, struct inode *inode,
-			    const char *path, const __u16 *pfid);
+extern void cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
+			      struct cifs_fattr *fattr, struct inode *inode,
+			      const char *path, const __u16 *pfid);
 extern int mode_to_acl(struct inode *inode, const char *path, __u64);
 
 extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *,
@@ -215,7 +220,11 @@ struct cifs_unix_set_info_args {
 	dev_t	device;
 };
 
-extern int CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *pTcon,
+extern int CIFSSMBUnixSetFileInfo(const int xid, struct cifsTconInfo *tcon,
+				  const struct cifs_unix_set_info_args *args,
+				  u16 fid, u32 pid_of_opener);
+
+extern int CIFSSMBUnixSetPathInfo(const int xid, struct cifsTconInfo *pTcon,
 			char *fileName,
 			const struct cifs_unix_set_info_args *args,
 			const struct nls_table *nls_codepage,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index b84c61d5bca..1866bc2927d 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -594,7 +594,7 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
 	else if (secFlags & CIFSSEC_MAY_KRB5)
 		server->secType = Kerberos;
 	else if (secFlags & CIFSSEC_MAY_NTLMSSP)
-		server->secType = NTLMSSP;
+		server->secType = RawNTLMSSP;
 	else if (secFlags & CIFSSEC_MAY_LANMAN)
 		server->secType = LANMAN;
 /* #ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -729,7 +729,7 @@ CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon)
 	 * the tcon is no longer on the list, so no need to take lock before
 	 * checking this.
 	 */
-	if (tcon->need_reconnect)
+	if ((tcon->need_reconnect) || (tcon->ses->need_reconnect))
 		return 0;
 
 	rc = small_smb_init(SMB_COM_TREE_DISCONNECT, 0, tcon,
@@ -1113,7 +1113,10 @@ PsxCreat:
 psx_create_err:
 	cifs_buf_release(pSMB);
 
-	cifs_stats_inc(&tcon->num_mkdirs);
+	if (posix_flags & SMB_O_DIRECTORY)
+		cifs_stats_inc(&tcon->num_posixmkdirs);
+	else
+		cifs_stats_inc(&tcon->num_posixopens);
 
 	if (rc == -EAGAIN)
 		goto PsxCreat;
@@ -5074,10 +5077,114 @@ SetAttrLgcyRetry:
 }
 #endif /* temporarily unneeded SetAttr legacy function */
 
+static void
+cifs_fill_unix_set_info(FILE_UNIX_BASIC_INFO *data_offset,
+			const struct cifs_unix_set_info_args *args)
+{
+	u64 mode = args->mode;
+
+	/*
+	 * Samba server ignores set of file size to zero due to bugs in some
+	 * older clients, but we should be precise - we use SetFileSize to
+	 * set file size and do not want to truncate file size to zero
+	 * accidently as happened on one Samba server beta by putting
+	 * zero instead of -1 here
+	 */
+	data_offset->EndOfFile = cpu_to_le64(NO_CHANGE_64);
+	data_offset->NumOfBytes = cpu_to_le64(NO_CHANGE_64);
+	data_offset->LastStatusChange = cpu_to_le64(args->ctime);
+	data_offset->LastAccessTime = cpu_to_le64(args->atime);
+	data_offset->LastModificationTime = cpu_to_le64(args->mtime);
+	data_offset->Uid = cpu_to_le64(args->uid);
+	data_offset->Gid = cpu_to_le64(args->gid);
+	/* better to leave device as zero when it is  */
+	data_offset->DevMajor = cpu_to_le64(MAJOR(args->device));
+	data_offset->DevMinor = cpu_to_le64(MINOR(args->device));
+	data_offset->Permissions = cpu_to_le64(mode);
+
+	if (S_ISREG(mode))
+		data_offset->Type = cpu_to_le32(UNIX_FILE);
+	else if (S_ISDIR(mode))
+		data_offset->Type = cpu_to_le32(UNIX_DIR);
+	else if (S_ISLNK(mode))
+		data_offset->Type = cpu_to_le32(UNIX_SYMLINK);
+	else if (S_ISCHR(mode))
+		data_offset->Type = cpu_to_le32(UNIX_CHARDEV);
+	else if (S_ISBLK(mode))
+		data_offset->Type = cpu_to_le32(UNIX_BLOCKDEV);
+	else if (S_ISFIFO(mode))
+		data_offset->Type = cpu_to_le32(UNIX_FIFO);
+	else if (S_ISSOCK(mode))
+		data_offset->Type = cpu_to_le32(UNIX_SOCKET);
+}
+
 int
-CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *tcon, char *fileName,
-		   const struct cifs_unix_set_info_args *args,
-		   const struct nls_table *nls_codepage, int remap)
+CIFSSMBUnixSetFileInfo(const int xid, struct cifsTconInfo *tcon,
+		       const struct cifs_unix_set_info_args *args,
+		       u16 fid, u32 pid_of_opener)
+{
+	struct smb_com_transaction2_sfi_req *pSMB  = NULL;
+	FILE_UNIX_BASIC_INFO *data_offset;
+	int rc = 0;
+	u16 params, param_offset, offset, byte_count, count;
+
+	cFYI(1, ("Set Unix Info (via SetFileInfo)"));
+	rc = small_smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB);
+
+	if (rc)
+		return rc;
+
+	pSMB->hdr.Pid = cpu_to_le16((__u16)pid_of_opener);
+	pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid_of_opener >> 16));
+
+	params = 6;
+	pSMB->MaxSetupCount = 0;
+	pSMB->Reserved = 0;
+	pSMB->Flags = 0;
+	pSMB->Timeout = 0;
+	pSMB->Reserved2 = 0;
+	param_offset = offsetof(struct smb_com_transaction2_sfi_req, Fid) - 4;
+	offset = param_offset + params;
+
+	data_offset = (FILE_UNIX_BASIC_INFO *)
+				((char *)(&pSMB->hdr.Protocol) + offset);
+	count = sizeof(FILE_UNIX_BASIC_INFO);
+
+	pSMB->MaxParameterCount = cpu_to_le16(2);
+	/* BB find max SMB PDU from sess */
+	pSMB->MaxDataCount = cpu_to_le16(1000);
+	pSMB->SetupCount = 1;
+	pSMB->Reserved3 = 0;
+	pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FILE_INFORMATION);
+	byte_count = 3 /* pad */  + params + count;
+	pSMB->DataCount = cpu_to_le16(count);
+	pSMB->ParameterCount = cpu_to_le16(params);
+	pSMB->TotalDataCount = pSMB->DataCount;
+	pSMB->TotalParameterCount = pSMB->ParameterCount;
+	pSMB->ParameterOffset = cpu_to_le16(param_offset);
+	pSMB->DataOffset = cpu_to_le16(offset);
+	pSMB->Fid = fid;
+	pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_BASIC);
+	pSMB->Reserved4 = 0;
+	pSMB->hdr.smb_buf_length += byte_count;
+	pSMB->ByteCount = cpu_to_le16(byte_count);
+
+	cifs_fill_unix_set_info(data_offset, args);
+
+	rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
+	if (rc)
+		cFYI(1, ("Send error in Set Time (SetFileInfo) = %d", rc));
+
+	/* Note: On -EAGAIN error only caller can retry on handle based calls
+		since file handle passed in no longer valid */
+
+	return rc;
+}
+
+int
+CIFSSMBUnixSetPathInfo(const int xid, struct cifsTconInfo *tcon, char *fileName,
+		       const struct cifs_unix_set_info_args *args,
+		       const struct nls_table *nls_codepage, int remap)
 {
 	TRANSACTION2_SPI_REQ *pSMB = NULL;
 	TRANSACTION2_SPI_RSP *pSMBr = NULL;
@@ -5086,7 +5193,6 @@ CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *tcon, char *fileName,
 	int bytes_returned = 0;
 	FILE_UNIX_BASIC_INFO *data_offset;
 	__u16 params, param_offset, offset, count, byte_count;
-	__u64 mode = args->mode;
 
 	cFYI(1, ("In SetUID/GID/Mode"));
 setPermsRetry:
@@ -5137,38 +5243,8 @@ setPermsRetry:
 	pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_BASIC);
 	pSMB->Reserved4 = 0;
 	pSMB->hdr.smb_buf_length += byte_count;
-	/* Samba server ignores set of file size to zero due to bugs in some
-	older clients, but we should be precise - we use SetFileSize to
-	set file size and do not want to truncate file size to zero
-	accidently as happened on one Samba server beta by putting
-	zero instead of -1 here */
-	data_offset->EndOfFile = cpu_to_le64(NO_CHANGE_64);
-	data_offset->NumOfBytes = cpu_to_le64(NO_CHANGE_64);
-	data_offset->LastStatusChange = cpu_to_le64(args->ctime);
-	data_offset->LastAccessTime = cpu_to_le64(args->atime);
-	data_offset->LastModificationTime = cpu_to_le64(args->mtime);
-	data_offset->Uid = cpu_to_le64(args->uid);
-	data_offset->Gid = cpu_to_le64(args->gid);
-	/* better to leave device as zero when it is  */
-	data_offset->DevMajor = cpu_to_le64(MAJOR(args->device));
-	data_offset->DevMinor = cpu_to_le64(MINOR(args->device));
-	data_offset->Permissions = cpu_to_le64(mode);
-
-	if (S_ISREG(mode))
-		data_offset->Type = cpu_to_le32(UNIX_FILE);
-	else if (S_ISDIR(mode))
-		data_offset->Type = cpu_to_le32(UNIX_DIR);
-	else if (S_ISLNK(mode))
-		data_offset->Type = cpu_to_le32(UNIX_SYMLINK);
-	else if (S_ISCHR(mode))
-		data_offset->Type = cpu_to_le32(UNIX_CHARDEV);
-	else if (S_ISBLK(mode))
-		data_offset->Type = cpu_to_le32(UNIX_BLOCKDEV);
-	else if (S_ISFIFO(mode))
-		data_offset->Type = cpu_to_le32(UNIX_FIFO);
-	else if (S_ISSOCK(mode))
-		data_offset->Type = cpu_to_le32(UNIX_SOCKET);
 
+	cifs_fill_unix_set_info(data_offset, args);
 
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 97f4311b9a8..1f3345d7fa7 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -70,7 +70,6 @@ struct smb_vol {
 	mode_t file_mode;
 	mode_t dir_mode;
 	unsigned secFlg;
-	bool rw:1;
 	bool retry:1;
 	bool intr:1;
 	bool setuids:1;
@@ -804,6 +803,10 @@ cifs_parse_mount_options(char *options, const char *devname,
 	char *data;
 	unsigned int  temp_len, i, j;
 	char separator[2];
+	short int override_uid = -1;
+	short int override_gid = -1;
+	bool uid_specified = false;
+	bool gid_specified = false;
 
 	separator[0] = ',';
 	separator[1] = 0;
@@ -832,7 +835,6 @@ cifs_parse_mount_options(char *options, const char *devname,
 	vol->dir_mode = vol->file_mode = S_IRUGO | S_IXUGO | S_IWUSR;
 
 	/* vol->retry default is 0 (i.e. "soft" limited retry not hard retry) */
-	vol->rw = true;
 	/* default is always to request posix paths. */
 	vol->posix_paths = 1;
 	/* default to using server inode numbers where available */
@@ -1095,18 +1097,20 @@ cifs_parse_mount_options(char *options, const char *devname,
 						    "too long.\n");
 				return 1;
 			}
-		} else if (strnicmp(data, "uid", 3) == 0) {
-			if (value && *value)
-				vol->linux_uid =
-					simple_strtoul(value, &value, 0);
-		} else if (strnicmp(data, "forceuid", 8) == 0) {
-				vol->override_uid = 1;
-		} else if (strnicmp(data, "gid", 3) == 0) {
-			if (value && *value)
-				vol->linux_gid =
-					simple_strtoul(value, &value, 0);
-		} else if (strnicmp(data, "forcegid", 8) == 0) {
-				vol->override_gid = 1;
+		} else if (!strnicmp(data, "uid", 3) && value && *value) {
+			vol->linux_uid = simple_strtoul(value, &value, 0);
+			uid_specified = true;
+		} else if (!strnicmp(data, "forceuid", 8)) {
+			override_uid = 1;
+		} else if (!strnicmp(data, "noforceuid", 10)) {
+			override_uid = 0;
+		} else if (!strnicmp(data, "gid", 3) && value && *value) {
+			vol->linux_gid = simple_strtoul(value, &value, 0);
+			gid_specified = true;
+		} else if (!strnicmp(data, "forcegid", 8)) {
+			override_gid = 1;
+		} else if (!strnicmp(data, "noforcegid", 10)) {
+			override_gid = 0;
 		} else if (strnicmp(data, "file_mode", 4) == 0) {
 			if (value && *value) {
 				vol->file_mode =
@@ -1199,7 +1203,9 @@ cifs_parse_mount_options(char *options, const char *devname,
 		} else if (strnicmp(data, "guest", 5) == 0) {
 			/* ignore */
 		} else if (strnicmp(data, "rw", 2) == 0) {
-			vol->rw = true;
+			/* ignore */
+		} else if (strnicmp(data, "ro", 2) == 0) {
+			/* ignore */
 		} else if (strnicmp(data, "noblocksend", 11) == 0) {
 			vol->noblocksnd = 1;
 		} else if (strnicmp(data, "noautotune", 10) == 0) {
@@ -1218,8 +1224,6 @@ cifs_parse_mount_options(char *options, const char *devname,
 			    parse these options again and set anything and it
 			    is ok to just ignore them */
 			continue;
-		} else if (strnicmp(data, "ro", 2) == 0) {
-			vol->rw = false;
 		} else if (strnicmp(data, "hard", 4) == 0) {
 			vol->retry = 1;
 		} else if (strnicmp(data, "soft", 4) == 0) {
@@ -1357,6 +1361,18 @@ cifs_parse_mount_options(char *options, const char *devname,
 	if (vol->UNCip == NULL)
 		vol->UNCip = &vol->UNC[2];
 
+	if (uid_specified)
+		vol->override_uid = override_uid;
+	else if (override_uid == 1)
+		printk(KERN_NOTICE "CIFS: ignoring forceuid mount option "
+				   "specified with no uid= option.\n");
+
+	if (gid_specified)
+		vol->override_gid = override_gid;
+	else if (override_gid == 1)
+		printk(KERN_NOTICE "CIFS: ignoring forcegid mount option "
+				   "specified with no gid= option.\n");
+
 	return 0;
 }
 
@@ -1386,8 +1402,10 @@ cifs_find_tcp_session(struct sockaddr_storage *addr)
 		     server->addr.sockAddr.sin_addr.s_addr))
 			continue;
 		else if (addr->ss_family == AF_INET6 &&
-			 !ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr,
-					  &addr6->sin6_addr))
+			 (!ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr,
+					   &addr6->sin6_addr) ||
+			  server->addr.sockAddr6.sin6_scope_id !=
+					   addr6->sin6_scope_id))
 			continue;
 
 		++server->srv_count;
@@ -1433,28 +1451,15 @@ cifs_get_tcp_session(struct smb_vol *volume_info)
 
 	memset(&addr, 0, sizeof(struct sockaddr_storage));
 
-	if (volume_info->UNCip && volume_info->UNC) {
-		rc = cifs_inet_pton(AF_INET, volume_info->UNCip,
-				    &sin_server->sin_addr.s_addr);
-
-		if (rc <= 0) {
-			/* not ipv4 address, try ipv6 */
-			rc = cifs_inet_pton(AF_INET6, volume_info->UNCip,
-					    &sin_server6->sin6_addr.in6_u);
-			if (rc > 0)
-				addr.ss_family = AF_INET6;
-		} else {
-			addr.ss_family = AF_INET;
-		}
+	cFYI(1, ("UNC: %s ip: %s", volume_info->UNC, volume_info->UNCip));
 
-		if (rc <= 0) {
+	if (volume_info->UNCip && volume_info->UNC) {
+		rc = cifs_convert_address(volume_info->UNCip, &addr);
+		if (!rc) {
 			/* we failed translating address */
 			rc = -EINVAL;
 			goto out_err;
 		}
-
-		cFYI(1, ("UNC: %s ip: %s", volume_info->UNC,
-			 volume_info->UNCip));
 	} else if (volume_info->UNCip) {
 		/* BB using ip addr as tcp_ses name to connect to the
 		   DFS root below */
@@ -1513,14 +1518,14 @@ cifs_get_tcp_session(struct smb_vol *volume_info)
 		cFYI(1, ("attempting ipv6 connect"));
 		/* BB should we allow ipv6 on port 139? */
 		/* other OS never observed in Wild doing 139 with v6 */
+		sin_server6->sin6_port = htons(volume_info->port);
 		memcpy(&tcp_ses->addr.sockAddr6, sin_server6,
 			sizeof(struct sockaddr_in6));
-		sin_server6->sin6_port = htons(volume_info->port);
 		rc = ipv6_connect(tcp_ses);
 	} else {
+		sin_server->sin_port = htons(volume_info->port);
 		memcpy(&tcp_ses->addr.sockAddr, sin_server,
 			sizeof(struct sockaddr_in));
-		sin_server->sin_port = htons(volume_info->port);
 		rc = ipv4_connect(tcp_ses);
 	}
 	if (rc < 0) {
@@ -2465,10 +2470,10 @@ try_mount_again:
 		tcon->local_lease = volume_info->local_lease;
 	}
 	if (pSesInfo) {
-		if (pSesInfo->capabilities & CAP_LARGE_FILES) {
-			sb->s_maxbytes = (u64) 1 << 63;
-		} else
-			sb->s_maxbytes = (u64) 1 << 31;	/* 2 GB */
+		if (pSesInfo->capabilities & CAP_LARGE_FILES)
+			sb->s_maxbytes = MAX_LFS_FILESIZE;
+		else
+			sb->s_maxbytes = MAX_NON_LFS;
 	}
 
 	/* BB FIXME fix time_gran to be larger for LANMAN sessions */
@@ -2557,11 +2562,20 @@ remote_path_check:
 
 			if (mount_data != mount_data_global)
 				kfree(mount_data);
+
 			mount_data = cifs_compose_mount_options(
 					cifs_sb->mountdata, full_path + 1,
 					referrals, &fake_devname);
-			kfree(fake_devname);
+
 			free_dfs_info_array(referrals, num_referrals);
+			kfree(fake_devname);
+			kfree(full_path);
+
+			if (IS_ERR(mount_data)) {
+				rc = PTR_ERR(mount_data);
+				mount_data = NULL;
+				goto mount_fail_check;
+			}
 
 			if (tcon)
 				cifs_put_tcon(tcon);
@@ -2569,8 +2583,6 @@ remote_path_check:
 				cifs_put_smb_ses(pSesInfo);
 
 			cleanup_volume_info(&volume_info);
-			FreeXid(xid);
-			kfree(full_path);
 			referral_walks_count++;
 			goto try_mount_again;
 		}
@@ -2739,6 +2751,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 		strncpy(tcon->treeName, tree, MAX_TREE_SIZE);
 
 		/* mostly informational -- no need to fail on error here */
+		kfree(tcon->nativeFileSystem);
 		tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr,
 						      bytes_left, is_unicode,
 						      nls_codepage);
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 3758965d73d..4326ffd90fa 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -188,6 +188,7 @@ int cifs_posix_open(char *full_path, struct inode **pinode,
 	FILE_UNIX_BASIC_INFO *presp_data;
 	__u32 posix_flags = 0;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
+	struct cifs_fattr fattr;
 
 	cFYI(1, ("posix open %s", full_path));
 
@@ -236,22 +237,21 @@ int cifs_posix_open(char *full_path, struct inode **pinode,
 	if (presp_data->Type == cpu_to_le32(-1))
 		goto posix_open_ret; /* open ok, caller does qpathinfo */
 
-	/* get new inode and set it up */
 	if (!pinode)
 		goto posix_open_ret; /* caller does not need info */
 
+	cifs_unix_basic_to_fattr(&fattr, presp_data, cifs_sb);
+
+	/* get new inode and set it up */
 	if (*pinode == NULL) {
-		__u64 unique_id = le64_to_cpu(presp_data->UniqueId);
-		*pinode = cifs_new_inode(sb, &unique_id);
+		*pinode = cifs_iget(sb, &fattr);
+		if (!*pinode) {
+			rc = -ENOMEM;
+			goto posix_open_ret;
+		}
+	} else {
+		cifs_fattr_to_inode(*pinode, &fattr);
 	}
-	/* else an inode was passed in. Update its info, don't create one */
-
-	/* We do not need to close the file if new_inode fails since
-	   the caller will retry qpathinfo as long as inode is null */
-	if (*pinode == NULL)
-		goto posix_open_ret;
-
-	posix_fill_in_inode(*pinode, presp_data, 1);
 
 	cifs_fill_fileinfo(*pinode, *pnetfid, cifs_sb->tcon, write_only);
 
@@ -307,8 +307,9 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 
 	if (oplockEnabled)
@@ -424,9 +425,10 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 			args.uid = NO_CHANGE_64;
 			args.gid = NO_CHANGE_64;
 		}
-		CIFSSMBUnixSetInfo(xid, tcon, full_path, &args,
-			cifs_sb->local_nls,
-			cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+		CIFSSMBUnixSetPathInfo(xid, tcon, full_path, &args,
+					cifs_sb->local_nls,
+					cifs_sb->mnt_cifs_flags &
+						CIFS_MOUNT_MAP_SPECIAL_CHR);
 	} else {
 		/* BB implement mode setting via Windows security
 		   descriptors e.g. */
@@ -514,10 +516,10 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode,
 			args.uid = NO_CHANGE_64;
 			args.gid = NO_CHANGE_64;
 		}
-		rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path,
-			&args, cifs_sb->local_nls,
-			cifs_sb->mnt_cifs_flags &
-				CIFS_MOUNT_MAP_SPECIAL_CHR);
+		rc = CIFSSMBUnixSetPathInfo(xid, pTcon, full_path, &args,
+					    cifs_sb->local_nls,
+					    cifs_sb->mnt_cifs_flags &
+						CIFS_MOUNT_MAP_SPECIAL_CHR);
 
 		if (!rc) {
 			rc = cifs_get_inode_info_unix(&newinode, full_path,
@@ -540,8 +542,9 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode,
 			buf = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
 			if (buf == NULL) {
 				kfree(full_path);
+				rc = -ENOMEM;
 				FreeXid(xid);
-				return -ENOMEM;
+				return rc;
 			}
 
 			rc = CIFSSMBOpen(xid, pTcon, full_path,
@@ -641,6 +644,15 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 			}
 	}
 
+	/*
+	 * O_EXCL: optimize away the lookup, but don't hash the dentry. Let
+	 * the VFS handle the create.
+	 */
+	if (nd->flags & LOOKUP_EXCL) {
+		d_instantiate(direntry, NULL);
+		return 0;
+	}
+
 	/* can not grab the rename sem here since it would
 	deadlock in the cases (beginning of sys_rename itself)
 	in which we already have the sb rename sem */
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index df4a306f697..87948147d7e 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -35,26 +35,11 @@
  * 		0 - name is not IP
  */
 static int
-is_ip(const char *name)
+is_ip(char *name)
 {
-	int rc;
-	struct sockaddr_in sin_server;
-	struct sockaddr_in6 sin_server6;
-
-	rc = cifs_inet_pton(AF_INET, name,
-			&sin_server.sin_addr.s_addr);
-
-	if (rc <= 0) {
-		/* not ipv4 address, try ipv6 */
-		rc = cifs_inet_pton(AF_INET6, name,
-				&sin_server6.sin6_addr.in6_u);
-		if (rc > 0)
-			return 1;
-	} else {
-		return 1;
-	}
-	/* we failed translating address */
-	return 0;
+	struct sockaddr_storage ss;
+
+	return cifs_convert_address(name, &ss);
 }
 
 static int
@@ -72,7 +57,7 @@ dns_resolver_instantiate(struct key *key, const void *data,
 	ip[datalen] = '\0';
 
 	/* make sure this looks like an address */
-	if (!is_ip((const char *) ip)) {
+	if (!is_ip(ip)) {
 		kfree(ip);
 		return -EINVAL;
 	}
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 06866841b97..c34b7f8a217 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -300,14 +300,16 @@ int cifs_open(struct inode *inode, struct file *file)
 	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
 	pCifsFile = cifs_fill_filedata(file);
 	if (pCifsFile) {
+		rc = 0;
 		FreeXid(xid);
-		return 0;
+		return rc;
 	}
 
 	full_path = build_path_from_dentry(file->f_path.dentry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 
 	cFYI(1, ("inode = 0x%p file flags are 0x%x for %s",
@@ -446,9 +448,9 @@ int cifs_open(struct inode *inode, struct file *file)
 				.mtime	= NO_CHANGE_64,
 				.device	= 0,
 			};
-			CIFSSMBUnixSetInfo(xid, tcon, full_path, &args,
-					    cifs_sb->local_nls,
-					    cifs_sb->mnt_cifs_flags &
+			CIFSSMBUnixSetPathInfo(xid, tcon, full_path, &args,
+					       cifs_sb->local_nls,
+					       cifs_sb->mnt_cifs_flags &
 						CIFS_MOUNT_MAP_SPECIAL_CHR);
 		}
 	}
@@ -491,11 +493,12 @@ static int cifs_reopen_file(struct file *file, bool can_flush)
 		return -EBADF;
 
 	xid = GetXid();
-	mutex_unlock(&pCifsFile->fh_mutex);
+	mutex_lock(&pCifsFile->fh_mutex);
 	if (!pCifsFile->invalidHandle) {
-		mutex_lock(&pCifsFile->fh_mutex);
+		mutex_unlock(&pCifsFile->fh_mutex);
+		rc = 0;
 		FreeXid(xid);
-		return 0;
+		return rc;
 	}
 
 	if (file->f_path.dentry == NULL) {
@@ -524,7 +527,7 @@ static int cifs_reopen_file(struct file *file, bool can_flush)
 	if (full_path == NULL) {
 		rc = -ENOMEM;
 reopen_error_exit:
-		mutex_lock(&pCifsFile->fh_mutex);
+		mutex_unlock(&pCifsFile->fh_mutex);
 		FreeXid(xid);
 		return rc;
 	}
@@ -566,14 +569,14 @@ reopen_error_exit:
 			 cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
 				CIFS_MOUNT_MAP_SPECIAL_CHR);
 	if (rc) {
-		mutex_lock(&pCifsFile->fh_mutex);
+		mutex_unlock(&pCifsFile->fh_mutex);
 		cFYI(1, ("cifs_open returned 0x%x", rc));
 		cFYI(1, ("oplock: %d", oplock));
 	} else {
 reopen_success:
 		pCifsFile->netfid = netfid;
 		pCifsFile->invalidHandle = false;
-		mutex_lock(&pCifsFile->fh_mutex);
+		mutex_unlock(&pCifsFile->fh_mutex);
 		pCifsInode = CIFS_I(inode);
 		if (pCifsInode) {
 			if (can_flush) {
@@ -845,8 +848,9 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock)
 	tcon = cifs_sb->tcon;
 
 	if (file->private_data == NULL) {
+		rc = -EBADF;
 		FreeXid(xid);
-		return -EBADF;
+		return rc;
 	}
 	netfid = ((struct cifsFileInfo *)file->private_data)->netfid;
 
@@ -1805,8 +1809,9 @@ ssize_t cifs_user_read(struct file *file, char __user *read_data,
 	pTcon = cifs_sb->tcon;
 
 	if (file->private_data == NULL) {
+		rc = -EBADF;
 		FreeXid(xid);
-		return -EBADF;
+		return rc;
 	}
 	open_file = (struct cifsFileInfo *)file->private_data;
 
@@ -1885,8 +1890,9 @@ static ssize_t cifs_read(struct file *file, char *read_data, size_t read_size,
 	pTcon = cifs_sb->tcon;
 
 	if (file->private_data == NULL) {
+		rc = -EBADF;
 		FreeXid(xid);
-		return -EBADF;
+		return rc;
 	}
 	open_file = (struct cifsFileInfo *)file->private_data;
 
@@ -2019,8 +2025,9 @@ static int cifs_readpages(struct file *file, struct address_space *mapping,
 
 	xid = GetXid();
 	if (file->private_data == NULL) {
+		rc = -EBADF;
 		FreeXid(xid);
-		return -EBADF;
+		return rc;
 	}
 	open_file = (struct cifsFileInfo *)file->private_data;
 	cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
@@ -2185,8 +2192,9 @@ static int cifs_readpage(struct file *file, struct page *page)
 	xid = GetXid();
 
 	if (file->private_data == NULL) {
+		rc = -EBADF;
 		FreeXid(xid);
-		return -EBADF;
+		return rc;
 	}
 
 	cFYI(1, ("readpage %p at offset %d 0x%x\n",
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index fad882b075b..82d83839655 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -77,239 +77,202 @@ static void cifs_set_ops(struct inode *inode, const bool is_dfs_referral)
 	}
 }
 
-static void cifs_unix_info_to_inode(struct inode *inode,
-		FILE_UNIX_BASIC_INFO *info, int force_uid_gid)
+/* populate an inode with info from a cifs_fattr struct */
+void
+cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr)
 {
+	struct cifsInodeInfo *cifs_i = CIFS_I(inode);
 	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
-	struct cifsInodeInfo *cifsInfo = CIFS_I(inode);
-	__u64 num_of_bytes = le64_to_cpu(info->NumOfBytes);
-	__u64 end_of_file = le64_to_cpu(info->EndOfFile);
+	unsigned long oldtime = cifs_i->time;
+
+	inode->i_atime = fattr->cf_atime;
+	inode->i_mtime = fattr->cf_mtime;
+	inode->i_ctime = fattr->cf_ctime;
+	inode->i_rdev = fattr->cf_rdev;
+	inode->i_nlink = fattr->cf_nlink;
+	inode->i_uid = fattr->cf_uid;
+	inode->i_gid = fattr->cf_gid;
+
+	/* if dynperm is set, don't clobber existing mode */
+	if (inode->i_state & I_NEW ||
+	    !(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM))
+		inode->i_mode = fattr->cf_mode;
+
+	cifs_i->cifsAttrs = fattr->cf_cifsattrs;
+	cifs_i->uniqueid = fattr->cf_uniqueid;
+
+	if (fattr->cf_flags & CIFS_FATTR_NEED_REVAL)
+		cifs_i->time = 0;
+	else
+		cifs_i->time = jiffies;
+
+	cFYI(1, ("inode 0x%p old_time=%ld new_time=%ld", inode,
+		 oldtime, cifs_i->time));
 
-	inode->i_atime = cifs_NTtimeToUnix(info->LastAccessTime);
-	inode->i_mtime =
-		cifs_NTtimeToUnix(info->LastModificationTime);
-	inode->i_ctime = cifs_NTtimeToUnix(info->LastStatusChange);
-	inode->i_mode = le64_to_cpu(info->Permissions);
+	cifs_i->delete_pending = fattr->cf_flags & CIFS_FATTR_DELETE_PENDING;
+
+	/*
+	 * Can't safely change the file size here if the client is writing to
+	 * it due to potential races.
+	 */
+	spin_lock(&inode->i_lock);
+	if (is_size_safe_to_change(cifs_i, fattr->cf_eof)) {
+		i_size_write(inode, fattr->cf_eof);
+
+		/*
+		 * i_blocks is not related to (i_size / i_blksize),
+		 * but instead 512 byte (2**9) size is required for
+		 * calculating num blocks.
+		 */
+		inode->i_blocks = (512 - 1 + fattr->cf_bytes) >> 9;
+	}
+	spin_unlock(&inode->i_lock);
+
+	cifs_set_ops(inode, fattr->cf_flags & CIFS_FATTR_DFS_REFERRAL);
+}
+
+/* Fill a cifs_fattr struct with info from FILE_UNIX_BASIC_INFO. */
+void
+cifs_unix_basic_to_fattr(struct cifs_fattr *fattr, FILE_UNIX_BASIC_INFO *info,
+			 struct cifs_sb_info *cifs_sb)
+{
+	memset(fattr, 0, sizeof(*fattr));
+	fattr->cf_uniqueid = le64_to_cpu(info->UniqueId);
+	fattr->cf_bytes = le64_to_cpu(info->NumOfBytes);
+	fattr->cf_eof = le64_to_cpu(info->EndOfFile);
+
+	fattr->cf_atime = cifs_NTtimeToUnix(info->LastAccessTime);
+	fattr->cf_mtime = cifs_NTtimeToUnix(info->LastModificationTime);
+	fattr->cf_ctime = cifs_NTtimeToUnix(info->LastStatusChange);
+	fattr->cf_mode = le64_to_cpu(info->Permissions);
 
 	/*
 	 * Since we set the inode type below we need to mask off
 	 * to avoid strange results if bits set above.
 	 */
-	inode->i_mode &= ~S_IFMT;
+	fattr->cf_mode &= ~S_IFMT;
 	switch (le32_to_cpu(info->Type)) {
 	case UNIX_FILE:
-		inode->i_mode |= S_IFREG;
+		fattr->cf_mode |= S_IFREG;
+		fattr->cf_dtype = DT_REG;
 		break;
 	case UNIX_SYMLINK:
-		inode->i_mode |= S_IFLNK;
+		fattr->cf_mode |= S_IFLNK;
+		fattr->cf_dtype = DT_LNK;
 		break;
 	case UNIX_DIR:
-		inode->i_mode |= S_IFDIR;
+		fattr->cf_mode |= S_IFDIR;
+		fattr->cf_dtype = DT_DIR;
 		break;
 	case UNIX_CHARDEV:
-		inode->i_mode |= S_IFCHR;
-		inode->i_rdev = MKDEV(le64_to_cpu(info->DevMajor),
-				      le64_to_cpu(info->DevMinor) & MINORMASK);
+		fattr->cf_mode |= S_IFCHR;
+		fattr->cf_dtype = DT_CHR;
+		fattr->cf_rdev = MKDEV(le64_to_cpu(info->DevMajor),
+				       le64_to_cpu(info->DevMinor) & MINORMASK);
 		break;
 	case UNIX_BLOCKDEV:
-		inode->i_mode |= S_IFBLK;
-		inode->i_rdev = MKDEV(le64_to_cpu(info->DevMajor),
-				      le64_to_cpu(info->DevMinor) & MINORMASK);
+		fattr->cf_mode |= S_IFBLK;
+		fattr->cf_dtype = DT_BLK;
+		fattr->cf_rdev = MKDEV(le64_to_cpu(info->DevMajor),
+				       le64_to_cpu(info->DevMinor) & MINORMASK);
 		break;
 	case UNIX_FIFO:
-		inode->i_mode |= S_IFIFO;
+		fattr->cf_mode |= S_IFIFO;
+		fattr->cf_dtype = DT_FIFO;
 		break;
 	case UNIX_SOCKET:
-		inode->i_mode |= S_IFSOCK;
+		fattr->cf_mode |= S_IFSOCK;
+		fattr->cf_dtype = DT_SOCK;
 		break;
 	default:
 		/* safest to call it a file if we do not know */
-		inode->i_mode |= S_IFREG;
+		fattr->cf_mode |= S_IFREG;
+		fattr->cf_dtype = DT_REG;
 		cFYI(1, ("unknown type %d", le32_to_cpu(info->Type)));
 		break;
 	}
 
-	if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID) &&
-	    !force_uid_gid)
-		inode->i_uid = cifs_sb->mnt_uid;
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID)
+		fattr->cf_uid = cifs_sb->mnt_uid;
 	else
-		inode->i_uid = le64_to_cpu(info->Uid);
+		fattr->cf_uid = le64_to_cpu(info->Uid);
 
-	if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) &&
-	    !force_uid_gid)
-		inode->i_gid = cifs_sb->mnt_gid;
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID)
+		fattr->cf_gid = cifs_sb->mnt_gid;
 	else
-		inode->i_gid = le64_to_cpu(info->Gid);
-
-	inode->i_nlink = le64_to_cpu(info->Nlinks);
-
-	cifsInfo->server_eof = end_of_file;
-	spin_lock(&inode->i_lock);
-	if (is_size_safe_to_change(cifsInfo, end_of_file)) {
-		/*
-		 * We can not safely change the file size here if the client
-		 * is writing to it due to potential races.
-		 */
-		i_size_write(inode, end_of_file);
+		fattr->cf_gid = le64_to_cpu(info->Gid);
 
-		/*
-		 * i_blocks is not related to (i_size / i_blksize),
-		 * but instead 512 byte (2**9) size is required for
-		 * calculating num blocks.
-		 */
-		inode->i_blocks = (512 - 1 + num_of_bytes) >> 9;
-	}
-	spin_unlock(&inode->i_lock);
+	fattr->cf_nlink = le64_to_cpu(info->Nlinks);
 }
 
-
 /*
- *	Needed to setup inode data for the directory which is the
- *	junction to the new submount (ie to setup the fake directory
- *      which represents a DFS referral)
- */
-static void fill_fake_finddataunix(FILE_UNIX_BASIC_INFO *pfnd_dat,
-			       struct super_block *sb)
-{
-	struct inode *pinode = NULL;
-
-	memset(pfnd_dat, 0, sizeof(FILE_UNIX_BASIC_INFO));
-
-/*	__le64 pfnd_dat->EndOfFile = cpu_to_le64(0);
-	__le64 pfnd_dat->NumOfBytes = cpu_to_le64(0);
-	__u64 UniqueId = 0;  */
-	pfnd_dat->LastStatusChange =
-		cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
-	pfnd_dat->LastAccessTime =
-		cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
-	pfnd_dat->LastModificationTime =
-		cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
-	pfnd_dat->Type = cpu_to_le32(UNIX_DIR);
-	pfnd_dat->Permissions = cpu_to_le64(S_IXUGO | S_IRWXU);
-	pfnd_dat->Nlinks = cpu_to_le64(2);
-	if (sb->s_root)
-		pinode = sb->s_root->d_inode;
-	if (pinode == NULL)
-		return;
-
-	/* fill in default values for the remaining based on root
-	   inode since we can not query the server for this inode info */
-	pfnd_dat->DevMajor = cpu_to_le64(MAJOR(pinode->i_rdev));
-	pfnd_dat->DevMinor = cpu_to_le64(MINOR(pinode->i_rdev));
-	pfnd_dat->Uid = cpu_to_le64(pinode->i_uid);
-	pfnd_dat->Gid = cpu_to_le64(pinode->i_gid);
-}
-
-/**
- * cifs_new inode - create new inode, initialize, and hash it
- * @sb - pointer to superblock
- * @inum - if valid pointer and serverino is enabled, replace i_ino with val
- *
- * Create a new inode, initialize it for CIFS and hash it. Returns the new
- * inode or NULL if one couldn't be allocated.
+ * Fill a cifs_fattr struct with fake inode info.
  *
- * If the share isn't mounted with "serverino" or inum is a NULL pointer then
- * we'll just use the inode number assigned by new_inode(). Note that this can
- * mean i_ino collisions since the i_ino assigned by new_inode is not
- * guaranteed to be unique.
+ * Needed to setup cifs_fattr data for the directory which is the
+ * junction to the new submount (ie to setup the fake directory
+ * which represents a DFS referral).
  */
-struct inode *
-cifs_new_inode(struct super_block *sb, __u64 *inum)
+static void
+cifs_create_dfs_fattr(struct cifs_fattr *fattr, struct super_block *sb)
 {
-	struct inode *inode;
-
-	inode = new_inode(sb);
-	if (inode == NULL)
-		return NULL;
-
-	/*
-	 * BB: Is i_ino == 0 legal? Here, we assume that it is. If it isn't we
-	 *     stop passing inum as ptr. Are there sanity checks we can use to
-	 *     ensure that the server is really filling in that field? Also,
-	 *     if serverino is disabled, perhaps we should be using iunique()?
-	 */
-	if (inum && (CIFS_SB(sb)->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM))
-		inode->i_ino = (unsigned long) *inum;
-
-	/*
-	 * must set this here instead of cifs_alloc_inode since VFS will
-	 * clobber i_flags
-	 */
-	if (sb->s_flags & MS_NOATIME)
-		inode->i_flags |= S_NOATIME | S_NOCMTIME;
-
-	insert_inode_hash(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
 
-	return inode;
+	cFYI(1, ("creating fake fattr for DFS referral"));
+
+	memset(fattr, 0, sizeof(*fattr));
+	fattr->cf_mode = S_IFDIR | S_IXUGO | S_IRWXU;
+	fattr->cf_uid = cifs_sb->mnt_uid;
+	fattr->cf_gid = cifs_sb->mnt_gid;
+	fattr->cf_atime = CURRENT_TIME;
+	fattr->cf_ctime = CURRENT_TIME;
+	fattr->cf_mtime = CURRENT_TIME;
+	fattr->cf_nlink = 2;
+	fattr->cf_flags |= CIFS_FATTR_DFS_REFERRAL;
 }
 
 int cifs_get_inode_info_unix(struct inode **pinode,
-	const unsigned char *full_path, struct super_block *sb, int xid)
+			     const unsigned char *full_path,
+			     struct super_block *sb, int xid)
 {
-	int rc = 0;
+	int rc;
 	FILE_UNIX_BASIC_INFO find_data;
-	struct cifsTconInfo *pTcon;
-	struct inode *inode;
+	struct cifs_fattr fattr;
+	struct cifsTconInfo *tcon;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
-	bool is_dfs_referral = false;
-	struct cifsInodeInfo *cifsInfo;
-	__u64 num_of_bytes;
-	__u64 end_of_file;
 
-	pTcon = cifs_sb->tcon;
+	tcon = cifs_sb->tcon;
 	cFYI(1, ("Getting info on %s", full_path));
 
 	/* could have done a find first instead but this returns more info */
-	rc = CIFSSMBUnixQPathInfo(xid, pTcon, full_path, &find_data,
+	rc = CIFSSMBUnixQPathInfo(xid, tcon, full_path, &find_data,
 				  cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
 					CIFS_MOUNT_MAP_SPECIAL_CHR);
-	if (rc == -EREMOTE && !is_dfs_referral) {
-		is_dfs_referral = true;
-		cFYI(DBG2, ("DFS ref"));
-		/* for DFS, server does not give us real inode data */
-		fill_fake_finddataunix(&find_data, sb);
-		rc = 0;
-	} else if (rc)
-		goto cgiiu_exit;
 
-	num_of_bytes = le64_to_cpu(find_data.NumOfBytes);
-	end_of_file = le64_to_cpu(find_data.EndOfFile);
+	if (!rc) {
+		cifs_unix_basic_to_fattr(&fattr, &find_data, cifs_sb);
+	} else if (rc == -EREMOTE) {
+		cifs_create_dfs_fattr(&fattr, sb);
+		rc = 0;
+	} else {
+		return rc;
+	}
 
-	/* get new inode */
 	if (*pinode == NULL) {
-		__u64 unique_id = le64_to_cpu(find_data.UniqueId);
-		*pinode = cifs_new_inode(sb, &unique_id);
-		if (*pinode == NULL) {
+		/* get new inode */
+		*pinode = cifs_iget(sb, &fattr);
+		if (!*pinode)
 			rc = -ENOMEM;
-			goto cgiiu_exit;
-		}
+	} else {
+		/* we already have inode, update it */
+		cifs_fattr_to_inode(*pinode, &fattr);
 	}
 
-	inode = *pinode;
-	cifsInfo = CIFS_I(inode);
-
-	cFYI(1, ("Old time %ld", cifsInfo->time));
-	cifsInfo->time = jiffies;
-	cFYI(1, ("New time %ld", cifsInfo->time));
-	/* this is ok to set on every inode revalidate */
-	atomic_set(&cifsInfo->inUse, 1);
-
-	cifs_unix_info_to_inode(inode, &find_data, 0);
-
-	if (num_of_bytes < end_of_file)
-		cFYI(1, ("allocation size less than end of file"));
-	cFYI(1, ("Size %ld and blocks %llu",
-		(unsigned long) inode->i_size,
-		(unsigned long long)inode->i_blocks));
-
-	cifs_set_ops(inode, is_dfs_referral);
-cgiiu_exit:
 	return rc;
 }
 
-static int decode_sfu_inode(struct inode *inode, __u64 size,
-			    const unsigned char *path,
-			    struct cifs_sb_info *cifs_sb, int xid)
+static int
+cifs_sfu_type(struct cifs_fattr *fattr, const unsigned char *path,
+	      struct cifs_sb_info *cifs_sb, int xid)
 {
 	int rc;
 	int oplock = 0;
@@ -321,10 +284,15 @@ static int decode_sfu_inode(struct inode *inode, __u64 size,
 
 	pbuf = buf;
 
-	if (size == 0) {
-		inode->i_mode |= S_IFIFO;
+	fattr->cf_mode &= ~S_IFMT;
+
+	if (fattr->cf_eof == 0) {
+		fattr->cf_mode |= S_IFIFO;
+		fattr->cf_dtype = DT_FIFO;
 		return 0;
-	} else if (size < 8) {
+	} else if (fattr->cf_eof < 8) {
+		fattr->cf_mode |= S_IFREG;
+		fattr->cf_dtype = DT_REG;
 		return -EINVAL;	 /* EOPNOTSUPP? */
 	}
 
@@ -336,42 +304,46 @@ static int decode_sfu_inode(struct inode *inode, __u64 size,
 	if (rc == 0) {
 		int buf_type = CIFS_NO_BUFFER;
 			/* Read header */
-		rc = CIFSSMBRead(xid, pTcon,
-				 netfid,
+		rc = CIFSSMBRead(xid, pTcon, netfid,
 				 24 /* length */, 0 /* offset */,
 				 &bytes_read, &pbuf, &buf_type);
 		if ((rc == 0) && (bytes_read >= 8)) {
 			if (memcmp("IntxBLK", pbuf, 8) == 0) {
 				cFYI(1, ("Block device"));
-				inode->i_mode |= S_IFBLK;
+				fattr->cf_mode |= S_IFBLK;
+				fattr->cf_dtype = DT_BLK;
 				if (bytes_read == 24) {
 					/* we have enough to decode dev num */
 					__u64 mjr; /* major */
 					__u64 mnr; /* minor */
 					mjr = le64_to_cpu(*(__le64 *)(pbuf+8));
 					mnr = le64_to_cpu(*(__le64 *)(pbuf+16));
-					inode->i_rdev = MKDEV(mjr, mnr);
+					fattr->cf_rdev = MKDEV(mjr, mnr);
 				}
 			} else if (memcmp("IntxCHR", pbuf, 8) == 0) {
 				cFYI(1, ("Char device"));
-				inode->i_mode |= S_IFCHR;
+				fattr->cf_mode |= S_IFCHR;
+				fattr->cf_dtype = DT_CHR;
 				if (bytes_read == 24) {
 					/* we have enough to decode dev num */
 					__u64 mjr; /* major */
 					__u64 mnr; /* minor */
 					mjr = le64_to_cpu(*(__le64 *)(pbuf+8));
 					mnr = le64_to_cpu(*(__le64 *)(pbuf+16));
-					inode->i_rdev = MKDEV(mjr, mnr);
+					fattr->cf_rdev = MKDEV(mjr, mnr);
 				}
 			} else if (memcmp("IntxLNK", pbuf, 7) == 0) {
 				cFYI(1, ("Symlink"));
-				inode->i_mode |= S_IFLNK;
+				fattr->cf_mode |= S_IFLNK;
+				fattr->cf_dtype = DT_LNK;
 			} else {
-				inode->i_mode |= S_IFREG; /* file? */
+				fattr->cf_mode |= S_IFREG; /* file? */
+				fattr->cf_dtype = DT_REG;
 				rc = -EOPNOTSUPP;
 			}
 		} else {
-			inode->i_mode |= S_IFREG; /* then it is a file */
+			fattr->cf_mode |= S_IFREG; /* then it is a file */
+			fattr->cf_dtype = DT_REG;
 			rc = -EOPNOTSUPP; /* or some unknown SFU type */
 		}
 		CIFSSMBClose(xid, pTcon, netfid);
@@ -381,9 +353,13 @@ static int decode_sfu_inode(struct inode *inode, __u64 size,
 
 #define SFBITS_MASK (S_ISVTX | S_ISGID | S_ISUID)  /* SETFILEBITS valid bits */
 
-static int get_sfu_mode(struct inode *inode,
-			const unsigned char *path,
-			struct cifs_sb_info *cifs_sb, int xid)
+/*
+ * Fetch mode bits as provided by SFU.
+ *
+ * FIXME: Doesn't this clobber the type bit we got from cifs_sfu_type ?
+ */
+static int cifs_sfu_mode(struct cifs_fattr *fattr, const unsigned char *path,
+			 struct cifs_sb_info *cifs_sb, int xid)
 {
 #ifdef CONFIG_CIFS_XATTR
 	ssize_t rc;
@@ -391,68 +367,80 @@ static int get_sfu_mode(struct inode *inode,
 	__u32 mode;
 
 	rc = CIFSSMBQueryEA(xid, cifs_sb->tcon, path, "SETFILEBITS",
-			ea_value, 4 /* size of buf */, cifs_sb->local_nls,
-		cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+			    ea_value, 4 /* size of buf */, cifs_sb->local_nls,
+			    cifs_sb->mnt_cifs_flags &
+				CIFS_MOUNT_MAP_SPECIAL_CHR);
 	if (rc < 0)
 		return (int)rc;
 	else if (rc > 3) {
 		mode = le32_to_cpu(*((__le32 *)ea_value));
-		inode->i_mode &= ~SFBITS_MASK;
-		cFYI(1, ("special bits 0%o org mode 0%o", mode, inode->i_mode));
-		inode->i_mode = (mode &  SFBITS_MASK) | inode->i_mode;
+		fattr->cf_mode &= ~SFBITS_MASK;
+		cFYI(1, ("special bits 0%o org mode 0%o", mode,
+			 fattr->cf_mode));
+		fattr->cf_mode = (mode & SFBITS_MASK) | fattr->cf_mode;
 		cFYI(1, ("special mode bits 0%o", mode));
-		return 0;
-	} else {
-		return 0;
 	}
+
+	return 0;
 #else
 	return -EOPNOTSUPP;
 #endif
 }
 
-/*
- *	Needed to setup inode data for the directory which is the
- *	junction to the new submount (ie to setup the fake directory
- *      which represents a DFS referral)
- */
-static void fill_fake_finddata(FILE_ALL_INFO *pfnd_dat,
-			       struct super_block *sb)
+/* Fill a cifs_fattr struct with info from FILE_ALL_INFO */
+static void
+cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info,
+		       struct cifs_sb_info *cifs_sb, bool adjust_tz)
 {
-	memset(pfnd_dat, 0, sizeof(FILE_ALL_INFO));
-
-/*	__le64 pfnd_dat->AllocationSize = cpu_to_le64(0);
-	__le64 pfnd_dat->EndOfFile = cpu_to_le64(0);
-	__u8 pfnd_dat->DeletePending = 0;
-	__u8 pfnd_data->Directory = 0;
-	__le32 pfnd_dat->EASize = 0;
-	__u64 pfnd_dat->IndexNumber = 0;
-	__u64 pfnd_dat->IndexNumber1 = 0;  */
-	pfnd_dat->CreationTime =
-		cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
-	pfnd_dat->LastAccessTime =
-		cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
-	pfnd_dat->LastWriteTime =
-		cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
-	pfnd_dat->ChangeTime =
-		cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
-	pfnd_dat->Attributes = cpu_to_le32(ATTR_DIRECTORY);
-	pfnd_dat->NumberOfLinks = cpu_to_le32(2);
+	memset(fattr, 0, sizeof(*fattr));
+	fattr->cf_cifsattrs = le32_to_cpu(info->Attributes);
+	if (info->DeletePending)
+		fattr->cf_flags |= CIFS_FATTR_DELETE_PENDING;
+
+	if (info->LastAccessTime)
+		fattr->cf_atime = cifs_NTtimeToUnix(info->LastAccessTime);
+	else
+		fattr->cf_atime = CURRENT_TIME;
+
+	fattr->cf_ctime = cifs_NTtimeToUnix(info->ChangeTime);
+	fattr->cf_mtime = cifs_NTtimeToUnix(info->LastWriteTime);
+
+	if (adjust_tz) {
+		fattr->cf_ctime.tv_sec += cifs_sb->tcon->ses->server->timeAdj;
+		fattr->cf_mtime.tv_sec += cifs_sb->tcon->ses->server->timeAdj;
+	}
+
+	fattr->cf_eof = le64_to_cpu(info->EndOfFile);
+	fattr->cf_bytes = le64_to_cpu(info->AllocationSize);
+
+	if (fattr->cf_cifsattrs & ATTR_DIRECTORY) {
+		fattr->cf_mode = S_IFDIR | cifs_sb->mnt_dir_mode;
+		fattr->cf_dtype = DT_DIR;
+	} else {
+		fattr->cf_mode = S_IFREG | cifs_sb->mnt_file_mode;
+		fattr->cf_dtype = DT_REG;
+
+		/* clear write bits if ATTR_READONLY is set */
+		if (fattr->cf_cifsattrs & ATTR_READONLY)
+			fattr->cf_mode &= ~(S_IWUGO);
+	}
+
+	fattr->cf_nlink = le32_to_cpu(info->NumberOfLinks);
+
+	fattr->cf_uid = cifs_sb->mnt_uid;
+	fattr->cf_gid = cifs_sb->mnt_gid;
 }
 
 int cifs_get_inode_info(struct inode **pinode,
 	const unsigned char *full_path, FILE_ALL_INFO *pfindData,
 	struct super_block *sb, int xid, const __u16 *pfid)
 {
-	int rc = 0;
-	__u32 attr;
-	struct cifsInodeInfo *cifsInfo;
+	int rc = 0, tmprc;
 	struct cifsTconInfo *pTcon;
-	struct inode *inode;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
 	char *buf = NULL;
 	bool adjustTZ = false;
-	bool is_dfs_referral = false;
-	umode_t default_mode;
+	struct cifs_fattr fattr;
 
 	pTcon = cifs_sb->tcon;
 	cFYI(1, ("Getting info on %s", full_path));
@@ -487,163 +475,85 @@ int cifs_get_inode_info(struct inode **pinode,
 			adjustTZ = true;
 		}
 	}
-	/* dump_mem("\nQPathInfo return data",&findData, sizeof(findData)); */
-	if (rc == -EREMOTE) {
-		is_dfs_referral = true;
-		fill_fake_finddata(pfindData, sb);
+
+	if (!rc) {
+		cifs_all_info_to_fattr(&fattr, (FILE_ALL_INFO *) pfindData,
+				       cifs_sb, adjustTZ);
+	} else if (rc == -EREMOTE) {
+		cifs_create_dfs_fattr(&fattr, sb);
 		rc = 0;
-	} else if (rc)
+	} else {
 		goto cgii_exit;
+	}
 
-	attr = le32_to_cpu(pfindData->Attributes);
-
-	/* get new inode */
+	/*
+	 * If an inode wasn't passed in, then get the inode number
+	 *
+	 * Is an i_ino of zero legal? Can we use that to check if the server
+	 * supports returning inode numbers?  Are there other sanity checks we
+	 * can use to ensure that the server is really filling in that field?
+	 *
+	 * We can not use the IndexNumber field by default from Windows or
+	 * Samba (in ALL_INFO buf) but we can request it explicitly. The SNIA
+	 * CIFS spec claims that this value is unique within the scope of a
+	 * share, and the windows docs hint that it's actually unique
+	 * per-machine.
+	 *
+	 * There may be higher info levels that work but are there Windows
+	 * server or network appliances for which IndexNumber field is not
+	 * guaranteed unique?
+	 */
 	if (*pinode == NULL) {
-		__u64 inode_num;
-		__u64 *pinum = &inode_num;
-
-		/* Is an i_ino of zero legal? Can we use that to check
-		   if the server supports returning inode numbers?  Are
-		   there other sanity checks we can use to ensure that
-		   the server is really filling in that field? */
-
-		/* We can not use the IndexNumber field by default from
-		   Windows or Samba (in ALL_INFO buf) but we can request
-		   it explicitly.  It may not be unique presumably if
-		   the server has multiple devices mounted under one share */
-
-		/* There may be higher info levels that work but are
-		   there Windows server or network appliances for which
-		   IndexNumber field is not guaranteed unique? */
-
 		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
 			int rc1 = 0;
 
 			rc1 = CIFSGetSrvInodeNumber(xid, pTcon,
-					full_path, pinum,
+					full_path, &fattr.cf_uniqueid,
 					cifs_sb->local_nls,
 					cifs_sb->mnt_cifs_flags &
 						CIFS_MOUNT_MAP_SPECIAL_CHR);
 			if (rc1) {
 				cFYI(1, ("GetSrvInodeNum rc %d", rc1));
-				pinum = NULL;
-				/* BB EOPNOSUPP disable SERVER_INUM? */
+				fattr.cf_uniqueid = iunique(sb, ROOT_I);
+				/* disable serverino if call not supported */
+				if (rc1 == -EINVAL)
+					cifs_sb->mnt_cifs_flags &=
+							~CIFS_MOUNT_SERVER_INUM;
 			}
 		} else {
-			pinum = NULL;
-		}
-
-		*pinode = cifs_new_inode(sb, pinum);
-		if (*pinode == NULL) {
-			rc = -ENOMEM;
-			goto cgii_exit;
+			fattr.cf_uniqueid = iunique(sb, ROOT_I);
 		}
-	}
-	inode = *pinode;
-	cifsInfo = CIFS_I(inode);
-	cifsInfo->cifsAttrs = attr;
-	cifsInfo->delete_pending = pfindData->DeletePending ? true : false;
-	cFYI(1, ("Old time %ld", cifsInfo->time));
-	cifsInfo->time = jiffies;
-	cFYI(1, ("New time %ld", cifsInfo->time));
-
-	/* blksize needs to be multiple of two. So safer to default to
-	blksize and blkbits set in superblock so 2**blkbits and blksize
-	will match rather than setting to:
-	(pTcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFE00;*/
-
-	/* Linux can not store file creation time so ignore it */
-	if (pfindData->LastAccessTime)
-		inode->i_atime = cifs_NTtimeToUnix(pfindData->LastAccessTime);
-	else /* do not need to use current_fs_time - time not stored */
-		inode->i_atime = CURRENT_TIME;
-	inode->i_mtime = cifs_NTtimeToUnix(pfindData->LastWriteTime);
-	inode->i_ctime = cifs_NTtimeToUnix(pfindData->ChangeTime);
-	cFYI(DBG2, ("Attributes came in as 0x%x", attr));
-	if (adjustTZ && (pTcon->ses) && (pTcon->ses->server)) {
-		inode->i_ctime.tv_sec += pTcon->ses->server->timeAdj;
-		inode->i_mtime.tv_sec += pTcon->ses->server->timeAdj;
-	}
-
-	/* get default inode mode */
-	if (attr & ATTR_DIRECTORY)
-		default_mode = cifs_sb->mnt_dir_mode;
-	else
-		default_mode = cifs_sb->mnt_file_mode;
-
-	/* set permission bits */
-	if (atomic_read(&cifsInfo->inUse) == 0 ||
-	    (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
-		inode->i_mode = default_mode;
-	else {
-		/* just reenable write bits if !ATTR_READONLY */
-		if ((inode->i_mode & S_IWUGO) == 0 &&
-		    (attr & ATTR_READONLY) == 0)
-			inode->i_mode |= (S_IWUGO & default_mode);
-
-		inode->i_mode &= ~S_IFMT;
-	}
-	/* clear write bits if ATTR_READONLY is set */
-	if (attr & ATTR_READONLY)
-		inode->i_mode &= ~S_IWUGO;
-
-	/* set inode type */
-	if ((attr & ATTR_SYSTEM) &&
-	    (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) {
-		/* no need to fix endianness on 0 */
-		if (pfindData->EndOfFile == 0)
-			inode->i_mode |= S_IFIFO;
-		else if (decode_sfu_inode(inode,
-				le64_to_cpu(pfindData->EndOfFile),
-				full_path, cifs_sb, xid))
-			cFYI(1, ("unknown SFU file type\n"));
 	} else {
-		if (attr & ATTR_DIRECTORY)
-			inode->i_mode |= S_IFDIR;
-		else
-			inode->i_mode |= S_IFREG;
+		fattr.cf_uniqueid = CIFS_I(*pinode)->uniqueid;
 	}
 
-	cifsInfo->server_eof = le64_to_cpu(pfindData->EndOfFile);
-	spin_lock(&inode->i_lock);
-	if (is_size_safe_to_change(cifsInfo, cifsInfo->server_eof)) {
-		/* can not safely shrink the file size here if the
-		   client is writing to it due to potential races */
-		i_size_write(inode, cifsInfo->server_eof);
-
-		/* 512 bytes (2**9) is the fake blocksize that must be
-		   used for this calculation */
-		inode->i_blocks = (512 - 1 + le64_to_cpu(
-				   pfindData->AllocationSize)) >> 9;
+	/* query for SFU type info if supported and needed */
+	if (fattr.cf_cifsattrs & ATTR_SYSTEM &&
+	    cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
+		tmprc = cifs_sfu_type(&fattr, full_path, cifs_sb, xid);
+		if (tmprc)
+			cFYI(1, ("cifs_sfu_type failed: %d", tmprc));
 	}
-	spin_unlock(&inode->i_lock);
 
-	inode->i_nlink = le32_to_cpu(pfindData->NumberOfLinks);
-
-	/* BB fill in uid and gid here? with help from winbind?
-	   or retrieve from NTFS stream extended attribute */
 #ifdef CONFIG_CIFS_EXPERIMENTAL
 	/* fill in 0777 bits from ACL */
 	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
 		cFYI(1, ("Getting mode bits from ACL"));
-		acl_to_uid_mode(cifs_sb, inode, full_path, pfid);
+		cifs_acl_to_fattr(cifs_sb, &fattr, *pinode, full_path, pfid);
 	}
 #endif
-	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
-		/* fill in remaining high mode bits e.g. SUID, VTX */
-		get_sfu_mode(inode, full_path, cifs_sb, xid);
-	} else if (atomic_read(&cifsInfo->inUse) == 0) {
-		inode->i_uid = cifs_sb->mnt_uid;
-		inode->i_gid = cifs_sb->mnt_gid;
-		/* set so we do not keep refreshing these fields with
-		   bad data after user has changed them in memory */
-		atomic_set(&cifsInfo->inUse, 1);
-	}
-
-	cifs_set_ops(inode, is_dfs_referral);
-
 
+	/* fill in remaining high mode bits e.g. SUID, VTX */
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
+		cifs_sfu_mode(&fattr, full_path, cifs_sb, xid);
 
+	if (!*pinode) {
+		*pinode = cifs_iget(sb, &fattr);
+		if (!*pinode)
+			rc = -ENOMEM;
+	} else {
+		cifs_fattr_to_inode(*pinode, &fattr);
+	}
 
 cgii_exit:
 	kfree(buf);
@@ -695,33 +605,78 @@ char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb)
 	return full_path;
 }
 
+static int
+cifs_find_inode(struct inode *inode, void *opaque)
+{
+	struct cifs_fattr *fattr = (struct cifs_fattr *) opaque;
+
+	if (CIFS_I(inode)->uniqueid != fattr->cf_uniqueid)
+		return 0;
+
+	return 1;
+}
+
+static int
+cifs_init_inode(struct inode *inode, void *opaque)
+{
+	struct cifs_fattr *fattr = (struct cifs_fattr *) opaque;
+
+	CIFS_I(inode)->uniqueid = fattr->cf_uniqueid;
+	return 0;
+}
+
+/* Given fattrs, get a corresponding inode */
+struct inode *
+cifs_iget(struct super_block *sb, struct cifs_fattr *fattr)
+{
+	unsigned long hash;
+	struct inode *inode;
+
+	cFYI(1, ("looking for uniqueid=%llu", fattr->cf_uniqueid));
+
+	/* hash down to 32-bits on 32-bit arch */
+	hash = cifs_uniqueid_to_ino_t(fattr->cf_uniqueid);
+
+	inode = iget5_locked(sb, hash, cifs_find_inode, cifs_init_inode, fattr);
+
+	/* we have fattrs in hand, update the inode */
+	if (inode) {
+		cifs_fattr_to_inode(inode, fattr);
+		if (sb->s_flags & MS_NOATIME)
+			inode->i_flags |= S_NOATIME | S_NOCMTIME;
+		if (inode->i_state & I_NEW) {
+			inode->i_ino = hash;
+			unlock_new_inode(inode);
+		}
+	}
+
+	return inode;
+}
+
 /* gets root inode */
 struct inode *cifs_root_iget(struct super_block *sb, unsigned long ino)
 {
 	int xid;
 	struct cifs_sb_info *cifs_sb;
-	struct inode *inode;
+	struct inode *inode = NULL;
 	long rc;
 	char *full_path;
 
-	inode = iget_locked(sb, ino);
-	if (!inode)
-		return ERR_PTR(-ENOMEM);
-	if (!(inode->i_state & I_NEW))
-		return inode;
-
-	cifs_sb = CIFS_SB(inode->i_sb);
+	cifs_sb = CIFS_SB(sb);
 	full_path = cifs_build_path_to_root(cifs_sb);
 	if (full_path == NULL)
 		return ERR_PTR(-ENOMEM);
 
 	xid = GetXid();
 	if (cifs_sb->tcon->unix_ext)
-		rc = cifs_get_inode_info_unix(&inode, full_path, inode->i_sb,
-						xid);
+		rc = cifs_get_inode_info_unix(&inode, full_path, sb, xid);
 	else
-		rc = cifs_get_inode_info(&inode, full_path, NULL, inode->i_sb,
+		rc = cifs_get_inode_info(&inode, full_path, NULL, sb,
 						xid, NULL);
+
+	if (!inode)
+		return ERR_PTR(-ENOMEM);
+
 	if (rc && cifs_sb->tcon->ipc) {
 		cFYI(1, ("ipc connection - fake read inode"));
 		inode->i_mode |= S_IFDIR;
@@ -737,7 +692,6 @@ struct inode *cifs_root_iget(struct super_block *sb, unsigned long ino)
 		return ERR_PTR(rc);
 	}
 
-	unlock_new_inode(inode);
 
 	kfree(full_path);
 	/* can not call macro FreeXid here since in a void func
@@ -988,8 +942,9 @@ int cifs_unlink(struct inode *dir, struct dentry *dentry)
 	 * sb->s_vfs_rename_mutex here */
 	full_path = build_path_from_dentry(dentry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 
 	if ((tcon->ses->capabilities & CAP_UNIX) &&
@@ -1062,44 +1017,6 @@ out_reval:
 	return rc;
 }
 
-void posix_fill_in_inode(struct inode *tmp_inode,
-	FILE_UNIX_BASIC_INFO *pData, int isNewInode)
-{
-	struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
-	loff_t local_size;
-	struct timespec local_mtime;
-
-	cifsInfo->time = jiffies;
-	atomic_inc(&cifsInfo->inUse);
-
-	/* save mtime and size */
-	local_mtime = tmp_inode->i_mtime;
-	local_size  = tmp_inode->i_size;
-
-	cifs_unix_info_to_inode(tmp_inode, pData, 1);
-	cifs_set_ops(tmp_inode, false);
-
-	if (!S_ISREG(tmp_inode->i_mode))
-		return;
-
-	/*
-	 * No sense invalidating pages for new inode
-	 * since we we have not started caching
-	 * readahead file data yet.
-	 */
-	if (isNewInode)
-		return;
-
-	if (timespec_equal(&tmp_inode->i_mtime, &local_mtime) &&
-		(local_size == tmp_inode->i_size)) {
-		cFYI(1, ("inode exists but unchanged"));
-	} else {
-		/* file may have changed on server */
-		cFYI(1, ("invalidate inode, readdir detected change"));
-		invalidate_remote_inode(tmp_inode);
-	}
-}
-
 int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode)
 {
 	int rc = 0, tmprc;
@@ -1108,6 +1025,7 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode)
 	struct cifsTconInfo *pTcon;
 	char *full_path = NULL;
 	struct inode *newinode = NULL;
+	struct cifs_fattr fattr;
 
 	cFYI(1, ("In cifs_mkdir, mode = 0x%x inode = 0x%p", mode, inode));
 
@@ -1118,8 +1036,9 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode)
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 
 	if ((pTcon->ses->capabilities & CAP_UNIX) &&
@@ -1146,7 +1065,6 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode)
 			cFYI(1, ("posix mkdir returned 0x%x", rc));
 			d_drop(direntry);
 		} else {
-			__u64 unique_id;
 			if (pInfo->Type == cpu_to_le32(-1)) {
 				/* no return info, go query for it */
 				kfree(pInfo);
@@ -1160,20 +1078,15 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode)
 			else
 				direntry->d_op = &cifs_dentry_ops;
 
-			unique_id = le64_to_cpu(pInfo->UniqueId);
-			newinode = cifs_new_inode(inode->i_sb, &unique_id);
-			if (newinode == NULL) {
+			cifs_unix_basic_to_fattr(&fattr, pInfo, cifs_sb);
+			newinode = cifs_iget(inode->i_sb, &fattr);
+			if (!newinode) {
 				kfree(pInfo);
 				goto mkdir_get_info;
 			}
 
-			newinode->i_nlink = 2;
 			d_instantiate(direntry, newinode);
 
-			/* we already checked in POSIXCreate whether
-			   frame was long enough */
-			posix_fill_in_inode(direntry->d_inode,
-					pInfo, 1 /* NewInode */);
 #ifdef CONFIG_CIFS_DEBUG2
 			cFYI(1, ("instantiated dentry %p %s to inode %p",
 				direntry, direntry->d_name.name, newinode));
@@ -1236,10 +1149,10 @@ mkdir_get_info:
 				args.uid = NO_CHANGE_64;
 				args.gid = NO_CHANGE_64;
 			}
-			CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args,
-					    cifs_sb->local_nls,
-					    cifs_sb->mnt_cifs_flags &
-					    CIFS_MOUNT_MAP_SPECIAL_CHR);
+			CIFSSMBUnixSetPathInfo(xid, pTcon, full_path, &args,
+					       cifs_sb->local_nls,
+					       cifs_sb->mnt_cifs_flags &
+						CIFS_MOUNT_MAP_SPECIAL_CHR);
 		} else {
 			if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) &&
 			    (mode & S_IWUGO) == 0) {
@@ -1303,8 +1216,9 @@ int cifs_rmdir(struct inode *inode, struct dentry *direntry)
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 
 	rc = CIFSSMBRmDir(xid, pTcon, full_path, cifs_sb->local_nls,
@@ -1508,8 +1422,9 @@ int cifs_revalidate(struct dentry *direntry)
 	   since that would deadlock */
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 	cFYI(1, ("Revalidate: %s inode 0x%p count %d dentry: 0x%p d_time %ld "
 		 "jiffies %ld", full_path, direntry->d_inode,
@@ -1618,6 +1533,7 @@ int cifs_getattr(struct vfsmount *mnt, struct dentry *dentry,
 	if (!err) {
 		generic_fillattr(dentry->d_inode, stat);
 		stat->blksize = CIFS_MAX_MSGSIZE;
+		stat->ino = CIFS_I(dentry->d_inode)->uniqueid;
 	}
 	return err;
 }
@@ -1782,6 +1698,7 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs)
 	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 	struct cifsTconInfo *pTcon = cifs_sb->tcon;
 	struct cifs_unix_set_info_args *args = NULL;
+	struct cifsFileInfo *open_file;
 
 	cFYI(1, ("setattr_unix on file %s attrs->ia_valid=0x%x",
 		 direntry->d_name.name, attrs->ia_valid));
@@ -1868,10 +1785,18 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs)
 		args->ctime = NO_CHANGE_64;
 
 	args->device = 0;
-	rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path, args,
-				cifs_sb->local_nls,
-				cifs_sb->mnt_cifs_flags &
-				CIFS_MOUNT_MAP_SPECIAL_CHR);
+	open_file = find_writable_file(cifsInode);
+	if (open_file) {
+		u16 nfid = open_file->netfid;
+		u32 npid = open_file->pid;
+		rc = CIFSSMBUnixSetFileInfo(xid, pTcon, args, nfid, npid);
+		atomic_dec(&open_file->wrtPending);
+	} else {
+		rc = CIFSSMBUnixSetPathInfo(xid, pTcon, full_path, args,
+				    cifs_sb->local_nls,
+				    cifs_sb->mnt_cifs_flags &
+					CIFS_MOUNT_MAP_SPECIAL_CHR);
+	}
 
 	if (!rc)
 		rc = inode_setattr(inode, attrs);
@@ -1911,8 +1836,9 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs)
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 
 	/*
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index cd83c53fcbb..fc1e0487eae 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -172,8 +172,9 @@ cifs_symlink(struct inode *inode, struct dentry *direntry, const char *symname)
 	full_path = build_path_from_dentry(direntry);
 
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 
 	cFYI(1, ("Full path: %s", full_path));
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 32d6baa0a54..bd6d6895730 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -133,10 +133,12 @@ static const struct smb_to_posix_error mapping_table_ERRHRD[] = {
 	{0, 0}
 };
 
-/* Convert string containing dotted ip address to binary form */
-/* returns 0 if invalid address */
-
-int
+/*
+ * Convert a string containing text IPv4 or IPv6 address to binary form.
+ *
+ * Returns 0 on failure.
+ */
+static int
 cifs_inet_pton(const int address_family, const char *cp, void *dst)
 {
 	int ret = 0;
@@ -153,6 +155,52 @@ cifs_inet_pton(const int address_family, const char *cp, void *dst)
 	return ret;
 }
 
+/*
+ * Try to convert a string to an IPv4 address and then attempt to convert
+ * it to an IPv6 address if that fails. Set the family field if either
+ * succeeds. If it's an IPv6 address and it has a '%' sign in it, try to
+ * treat the part following it as a numeric sin6_scope_id.
+ *
+ * Returns 0 on failure.
+ */
+int
+cifs_convert_address(char *src, void *dst)
+{
+	int rc;
+	char *pct, *endp;
+	struct sockaddr_in *s4 = (struct sockaddr_in *) dst;
+	struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) dst;
+
+	/* IPv4 address */
+	if (cifs_inet_pton(AF_INET, src, &s4->sin_addr.s_addr)) {
+		s4->sin_family = AF_INET;
+		return 1;
+	}
+
+	/* temporarily terminate string */
+	pct = strchr(src, '%');
+	if (pct)
+		*pct = '\0';
+
+	rc = cifs_inet_pton(AF_INET6, src, &s6->sin6_addr.s6_addr);
+
+	/* repair temp termination (if any) and make pct point to scopeid */
+	if (pct)
+		*pct++ = '%';
+
+	if (!rc)
+		return rc;
+
+	s6->sin6_family = AF_INET6;
+	if (pct) {
+		s6->sin6_scope_id = (u32) simple_strtoul(pct, &endp, 0);
+		if (!*pct || *endp)
+			return 0;
+	}
+
+	return rc;
+}
+
 /*****************************************************************************
 convert a NT status code to a dos class/code
  *****************************************************************************/
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 86d0055dc52..f823a4a208a 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -63,374 +63,123 @@ static inline void dump_cifs_file_struct(struct file *file, char *label)
 }
 #endif /* DEBUG2 */
 
-/* Returns 1 if new inode created, 2 if both dentry and inode were */
-/* Might check in the future if inode number changed so we can rehash inode */
-static int
-construct_dentry(struct qstr *qstring, struct file *file,
-		 struct inode **ptmp_inode, struct dentry **pnew_dentry,
-		 __u64 *inum)
+/*
+ * Find the dentry that matches "name". If there isn't one, create one. If it's
+ * a negative dentry or the uniqueid changed, then drop it and recreate it.
+ */
+static struct dentry *
+cifs_readdir_lookup(struct dentry *parent, struct qstr *name,
+		    struct cifs_fattr *fattr)
 {
-	struct dentry *tmp_dentry = NULL;
-	struct super_block *sb = file->f_path.dentry->d_sb;
-	int rc = 0;
+	struct dentry *dentry, *alias;
+	struct inode *inode;
+	struct super_block *sb = parent->d_inode->i_sb;
+
+	cFYI(1, ("For %s", name->name));
+
+	dentry = d_lookup(parent, name);
+	if (dentry) {
+		/* FIXME: check for inode number changes? */
+		if (dentry->d_inode != NULL)
+			return dentry;
+		d_drop(dentry);
+		dput(dentry);
+	}
 
-	cFYI(1, ("For %s", qstring->name));
-
-	qstring->hash = full_name_hash(qstring->name, qstring->len);
-	tmp_dentry = d_lookup(file->f_path.dentry, qstring);
-	if (tmp_dentry) {
-		/* BB: overwrite old name? i.e. tmp_dentry->d_name and
-		 * tmp_dentry->d_name.len??
-		 */
-		cFYI(0, ("existing dentry with inode 0x%p",
-			 tmp_dentry->d_inode));
-		*ptmp_inode = tmp_dentry->d_inode;
-		if (*ptmp_inode == NULL) {
-			*ptmp_inode = cifs_new_inode(sb, inum);
-			if (*ptmp_inode == NULL)
-				return rc;
-			rc = 1;
-		}
-	} else {
-		tmp_dentry = d_alloc(file->f_path.dentry, qstring);
-		if (tmp_dentry == NULL) {
-			cERROR(1, ("Failed allocating dentry"));
-			*ptmp_inode = NULL;
-			return rc;
-		}
+	dentry = d_alloc(parent, name);
+	if (dentry == NULL)
+		return NULL;
 
-		if (CIFS_SB(sb)->tcon->nocase)
-			tmp_dentry->d_op = &cifs_ci_dentry_ops;
-		else
-			tmp_dentry->d_op = &cifs_dentry_ops;
+	inode = cifs_iget(sb, fattr);
+	if (!inode) {
+		dput(dentry);
+		return NULL;
+	}
 
-		*ptmp_inode = cifs_new_inode(sb, inum);
-		if (*ptmp_inode == NULL)
-			return rc;
-		rc = 2;
+	if (CIFS_SB(sb)->tcon->nocase)
+		dentry->d_op = &cifs_ci_dentry_ops;
+	else
+		dentry->d_op = &cifs_dentry_ops;
+
+	alias = d_materialise_unique(dentry, inode);
+	if (alias != NULL) {
+		dput(dentry);
+		if (IS_ERR(alias))
+			return NULL;
+		dentry = alias;
 	}
 
-	tmp_dentry->d_time = jiffies;
-	*pnew_dentry = tmp_dentry;
-	return rc;
+	return dentry;
 }
 
-static void fill_in_inode(struct inode *tmp_inode, int new_buf_type,
-			  char *buf, unsigned int *pobject_type, int isNewInode)
+static void
+cifs_fill_common_info(struct cifs_fattr *fattr, struct cifs_sb_info *cifs_sb)
 {
-	loff_t local_size;
-	struct timespec local_mtime;
-
-	struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
-	struct cifs_sb_info *cifs_sb = CIFS_SB(tmp_inode->i_sb);
-	__u32 attr;
-	__u64 allocation_size;
-	__u64 end_of_file;
-	umode_t default_mode;
-
-	/* save mtime and size */
-	local_mtime = tmp_inode->i_mtime;
-	local_size  = tmp_inode->i_size;
-
-	if (new_buf_type) {
-		FILE_DIRECTORY_INFO *pfindData = (FILE_DIRECTORY_INFO *)buf;
-
-		attr = le32_to_cpu(pfindData->ExtFileAttributes);
-		allocation_size = le64_to_cpu(pfindData->AllocationSize);
-		end_of_file = le64_to_cpu(pfindData->EndOfFile);
-		tmp_inode->i_atime =
-			cifs_NTtimeToUnix(pfindData->LastAccessTime);
-		tmp_inode->i_mtime =
-			cifs_NTtimeToUnix(pfindData->LastWriteTime);
-		tmp_inode->i_ctime =
-			cifs_NTtimeToUnix(pfindData->ChangeTime);
-	} else { /* legacy, OS2 and DOS style */
-		int offset = cifs_sb->tcon->ses->server->timeAdj;
-		FIND_FILE_STANDARD_INFO *pfindData =
-			(FIND_FILE_STANDARD_INFO *)buf;
-
-		tmp_inode->i_mtime = cnvrtDosUnixTm(pfindData->LastWriteDate,
-						    pfindData->LastWriteTime,
-						    offset);
-		tmp_inode->i_atime = cnvrtDosUnixTm(pfindData->LastAccessDate,
-						    pfindData->LastAccessTime,
-						    offset);
-		tmp_inode->i_ctime = cnvrtDosUnixTm(pfindData->LastWriteDate,
-						    pfindData->LastWriteTime,
-						    offset);
-		attr = le16_to_cpu(pfindData->Attributes);
-		allocation_size = le32_to_cpu(pfindData->AllocationSize);
-		end_of_file = le32_to_cpu(pfindData->DataSize);
-	}
+	fattr->cf_uid = cifs_sb->mnt_uid;
+	fattr->cf_gid = cifs_sb->mnt_gid;
 
-	/* Linux can not store file creation time unfortunately so ignore it */
-
-	cifsInfo->cifsAttrs = attr;
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
-		/* get more accurate mode via ACL - so force inode refresh */
-		cifsInfo->time = 0;
-	} else
-#endif /* CONFIG_CIFS_EXPERIMENTAL */
-		cifsInfo->time = jiffies;
-
-	/* treat dos attribute of read-only as read-only mode bit e.g. 555? */
-	/* 2767 perms - indicate mandatory locking */
-		/* BB fill in uid and gid here? with help from winbind?
-		   or retrieve from NTFS stream extended attribute */
-	if (atomic_read(&cifsInfo->inUse) == 0) {
-		tmp_inode->i_uid = cifs_sb->mnt_uid;
-		tmp_inode->i_gid = cifs_sb->mnt_gid;
-	}
-
-	if (attr & ATTR_DIRECTORY)
-		default_mode = cifs_sb->mnt_dir_mode;
-	else
-		default_mode = cifs_sb->mnt_file_mode;
-
-	/* set initial permissions */
-	if ((atomic_read(&cifsInfo->inUse) == 0) ||
-	    (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
-		tmp_inode->i_mode = default_mode;
-	else {
-		/* just reenable write bits if !ATTR_READONLY */
-		if ((tmp_inode->i_mode & S_IWUGO) == 0 &&
-		    (attr & ATTR_READONLY) == 0)
-			tmp_inode->i_mode |= (S_IWUGO & default_mode);
-
-		tmp_inode->i_mode &= ~S_IFMT;
+	if (fattr->cf_cifsattrs & ATTR_DIRECTORY) {
+		fattr->cf_mode = S_IFDIR | cifs_sb->mnt_dir_mode;
+		fattr->cf_dtype = DT_DIR;
+	} else {
+		fattr->cf_mode = S_IFREG | cifs_sb->mnt_file_mode;
+		fattr->cf_dtype = DT_REG;
 	}
 
-	/* clear write bits if ATTR_READONLY is set */
-	if (attr & ATTR_READONLY)
-		tmp_inode->i_mode &= ~S_IWUGO;
+	if (fattr->cf_cifsattrs & ATTR_READONLY)
+		fattr->cf_mode &= ~S_IWUGO;
 
-	/* set inode type */
-	if ((attr & ATTR_SYSTEM) &&
-	    (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) {
-		if (end_of_file == 0)  {
-			tmp_inode->i_mode |= S_IFIFO;
-			*pobject_type = DT_FIFO;
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL &&
+	    fattr->cf_cifsattrs & ATTR_SYSTEM) {
+		if (fattr->cf_eof == 0)  {
+			fattr->cf_mode &= ~S_IFMT;
+			fattr->cf_mode |= S_IFIFO;
+			fattr->cf_dtype = DT_FIFO;
 		} else {
 			/*
-			 * trying to get the type can be slow, so just call
-			 * this a regular file for now, and mark for reval
+			 * trying to get the type and mode via SFU can be slow,
+			 * so just call those regular files for now, and mark
+			 * for reval
 			 */
-			tmp_inode->i_mode |= S_IFREG;
-			*pobject_type = DT_REG;
-			cifsInfo->time = 0;
-		}
-	} else {
-		if (attr & ATTR_DIRECTORY) {
-			tmp_inode->i_mode |= S_IFDIR;
-			*pobject_type = DT_DIR;
-		} else {
-			tmp_inode->i_mode |= S_IFREG;
-			*pobject_type = DT_REG;
+			fattr->cf_flags |= CIFS_FATTR_NEED_REVAL;
 		}
 	}
+}
 
-	/* can not fill in nlink here as in qpathinfo version and Unx search */
-	if (atomic_read(&cifsInfo->inUse) == 0)
-		atomic_set(&cifsInfo->inUse, 1);
-
-	cifsInfo->server_eof = end_of_file;
-	spin_lock(&tmp_inode->i_lock);
-	if (is_size_safe_to_change(cifsInfo, end_of_file)) {
-		/* can not safely change the file size here if the
-		client is writing to it due to potential races */
-		i_size_write(tmp_inode, end_of_file);
-
-	/* 512 bytes (2**9) is the fake blocksize that must be used */
-	/* for this calculation, even though the reported blocksize is larger */
-		tmp_inode->i_blocks = (512 - 1 + allocation_size) >> 9;
-	}
-	spin_unlock(&tmp_inode->i_lock);
-
-	if (allocation_size < end_of_file)
-		cFYI(1, ("May be sparse file, allocation less than file size"));
-	cFYI(1, ("File Size %ld and blocks %llu",
-		(unsigned long)tmp_inode->i_size,
-		(unsigned long long)tmp_inode->i_blocks));
-	if (S_ISREG(tmp_inode->i_mode)) {
-		cFYI(1, ("File inode"));
-		tmp_inode->i_op = &cifs_file_inode_ops;
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) {
-			if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
-				tmp_inode->i_fop = &cifs_file_direct_nobrl_ops;
-			else
-				tmp_inode->i_fop = &cifs_file_direct_ops;
-		} else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
-			tmp_inode->i_fop = &cifs_file_nobrl_ops;
-		else
-			tmp_inode->i_fop = &cifs_file_ops;
-
-		if ((cifs_sb->tcon) && (cifs_sb->tcon->ses) &&
-		   (cifs_sb->tcon->ses->server->maxBuf <
-			PAGE_CACHE_SIZE + MAX_CIFS_HDR_SIZE))
-			tmp_inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
-		else
-			tmp_inode->i_data.a_ops = &cifs_addr_ops;
-
-		if (isNewInode)
-			return; /* No sense invalidating pages for new inode
-				   since have not started caching readahead file
-				   data yet */
-
-		if (timespec_equal(&tmp_inode->i_mtime, &local_mtime) &&
-			(local_size == tmp_inode->i_size)) {
-			cFYI(1, ("inode exists but unchanged"));
-		} else {
-			/* file may have changed on server */
-			cFYI(1, ("invalidate inode, readdir detected change"));
-			invalidate_remote_inode(tmp_inode);
-		}
-	} else if (S_ISDIR(tmp_inode->i_mode)) {
-		cFYI(1, ("Directory inode"));
-		tmp_inode->i_op = &cifs_dir_inode_ops;
-		tmp_inode->i_fop = &cifs_dir_ops;
-	} else if (S_ISLNK(tmp_inode->i_mode)) {
-		cFYI(1, ("Symbolic Link inode"));
-		tmp_inode->i_op = &cifs_symlink_inode_ops;
-	} else {
-		cFYI(1, ("Init special inode"));
-		init_special_inode(tmp_inode, tmp_inode->i_mode,
-				   tmp_inode->i_rdev);
-	}
+void
+cifs_dir_info_to_fattr(struct cifs_fattr *fattr, FILE_DIRECTORY_INFO *info,
+		       struct cifs_sb_info *cifs_sb)
+{
+	memset(fattr, 0, sizeof(*fattr));
+	fattr->cf_cifsattrs = le32_to_cpu(info->ExtFileAttributes);
+	fattr->cf_eof = le64_to_cpu(info->EndOfFile);
+	fattr->cf_bytes = le64_to_cpu(info->AllocationSize);
+	fattr->cf_atime = cifs_NTtimeToUnix(info->LastAccessTime);
+	fattr->cf_ctime = cifs_NTtimeToUnix(info->ChangeTime);
+	fattr->cf_mtime = cifs_NTtimeToUnix(info->LastWriteTime);
+
+	cifs_fill_common_info(fattr, cifs_sb);
 }
 
-static void unix_fill_in_inode(struct inode *tmp_inode,
-	FILE_UNIX_INFO *pfindData, unsigned int *pobject_type, int isNewInode)
+void
+cifs_std_info_to_fattr(struct cifs_fattr *fattr, FIND_FILE_STANDARD_INFO *info,
+		       struct cifs_sb_info *cifs_sb)
 {
-	loff_t local_size;
-	struct timespec local_mtime;
-
-	struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
-	struct cifs_sb_info *cifs_sb = CIFS_SB(tmp_inode->i_sb);
-
-	__u32 type = le32_to_cpu(pfindData->Type);
-	__u64 num_of_bytes = le64_to_cpu(pfindData->NumOfBytes);
-	__u64 end_of_file = le64_to_cpu(pfindData->EndOfFile);
-	cifsInfo->time = jiffies;
-	atomic_inc(&cifsInfo->inUse);
-
-	/* save mtime and size */
-	local_mtime = tmp_inode->i_mtime;
-	local_size  = tmp_inode->i_size;
-
-	tmp_inode->i_atime =
-	    cifs_NTtimeToUnix(pfindData->LastAccessTime);
-	tmp_inode->i_mtime =
-	    cifs_NTtimeToUnix(pfindData->LastModificationTime);
-	tmp_inode->i_ctime =
-	    cifs_NTtimeToUnix(pfindData->LastStatusChange);
-
-	tmp_inode->i_mode = le64_to_cpu(pfindData->Permissions);
-	/* since we set the inode type below we need to mask off type
-	   to avoid strange results if bits above were corrupt */
-	tmp_inode->i_mode &= ~S_IFMT;
-	if (type == UNIX_FILE) {
-		*pobject_type = DT_REG;
-		tmp_inode->i_mode |= S_IFREG;
-	} else if (type == UNIX_SYMLINK) {
-		*pobject_type = DT_LNK;
-		tmp_inode->i_mode |= S_IFLNK;
-	} else if (type == UNIX_DIR) {
-		*pobject_type = DT_DIR;
-		tmp_inode->i_mode |= S_IFDIR;
-	} else if (type == UNIX_CHARDEV) {
-		*pobject_type = DT_CHR;
-		tmp_inode->i_mode |= S_IFCHR;
-		tmp_inode->i_rdev = MKDEV(le64_to_cpu(pfindData->DevMajor),
-				le64_to_cpu(pfindData->DevMinor) & MINORMASK);
-	} else if (type == UNIX_BLOCKDEV) {
-		*pobject_type = DT_BLK;
-		tmp_inode->i_mode |= S_IFBLK;
-		tmp_inode->i_rdev = MKDEV(le64_to_cpu(pfindData->DevMajor),
-				le64_to_cpu(pfindData->DevMinor) & MINORMASK);
-	} else if (type == UNIX_FIFO) {
-		*pobject_type = DT_FIFO;
-		tmp_inode->i_mode |= S_IFIFO;
-	} else if (type == UNIX_SOCKET) {
-		*pobject_type = DT_SOCK;
-		tmp_inode->i_mode |= S_IFSOCK;
-	} else {
-		/* safest to just call it a file */
-		*pobject_type = DT_REG;
-		tmp_inode->i_mode |= S_IFREG;
-		cFYI(1, ("unknown inode type %d", type));
-	}
+	int offset = cifs_sb->tcon->ses->server->timeAdj;
 
-	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID)
-		tmp_inode->i_uid = cifs_sb->mnt_uid;
-	else
-		tmp_inode->i_uid = le64_to_cpu(pfindData->Uid);
-	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID)
-		tmp_inode->i_gid = cifs_sb->mnt_gid;
-	else
-		tmp_inode->i_gid = le64_to_cpu(pfindData->Gid);
-	tmp_inode->i_nlink = le64_to_cpu(pfindData->Nlinks);
-
-	cifsInfo->server_eof = end_of_file;
-	spin_lock(&tmp_inode->i_lock);
-	if (is_size_safe_to_change(cifsInfo, end_of_file)) {
-		/* can not safely change the file size here if the
-		client is writing to it due to potential races */
-		i_size_write(tmp_inode, end_of_file);
-
-	/* 512 bytes (2**9) is the fake blocksize that must be used */
-	/* for this calculation, not the real blocksize */
-		tmp_inode->i_blocks = (512 - 1 + num_of_bytes) >> 9;
-	}
-	spin_unlock(&tmp_inode->i_lock);
+	memset(fattr, 0, sizeof(*fattr));
+	fattr->cf_atime = cnvrtDosUnixTm(info->LastAccessDate,
+					    info->LastAccessTime, offset);
+	fattr->cf_ctime = cnvrtDosUnixTm(info->LastWriteDate,
+					    info->LastWriteTime, offset);
+	fattr->cf_mtime = cnvrtDosUnixTm(info->LastWriteDate,
+					    info->LastWriteTime, offset);
 
-	if (S_ISREG(tmp_inode->i_mode)) {
-		cFYI(1, ("File inode"));
-		tmp_inode->i_op = &cifs_file_inode_ops;
+	fattr->cf_cifsattrs = le16_to_cpu(info->Attributes);
+	fattr->cf_bytes = le32_to_cpu(info->AllocationSize);
+	fattr->cf_eof = le32_to_cpu(info->DataSize);
 
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) {
-			if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
-				tmp_inode->i_fop = &cifs_file_direct_nobrl_ops;
-			else
-				tmp_inode->i_fop = &cifs_file_direct_ops;
-		} else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
-			tmp_inode->i_fop = &cifs_file_nobrl_ops;
-		else
-			tmp_inode->i_fop = &cifs_file_ops;
-
-		if ((cifs_sb->tcon) && (cifs_sb->tcon->ses) &&
-		   (cifs_sb->tcon->ses->server->maxBuf <
-			PAGE_CACHE_SIZE + MAX_CIFS_HDR_SIZE))
-			tmp_inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
-		else
-			tmp_inode->i_data.a_ops = &cifs_addr_ops;
-
-		if (isNewInode)
-			return; /* No sense invalidating pages for new inode
-				   since we have not started caching readahead
-				   file data for it yet */
-
-		if (timespec_equal(&tmp_inode->i_mtime, &local_mtime) &&
-			(local_size == tmp_inode->i_size)) {
-			cFYI(1, ("inode exists but unchanged"));
-		} else {
-			/* file may have changed on server */
-			cFYI(1, ("invalidate inode, readdir detected change"));
-			invalidate_remote_inode(tmp_inode);
-		}
-	} else if (S_ISDIR(tmp_inode->i_mode)) {
-		cFYI(1, ("Directory inode"));
-		tmp_inode->i_op = &cifs_dir_inode_ops;
-		tmp_inode->i_fop = &cifs_dir_ops;
-	} else if (S_ISLNK(tmp_inode->i_mode)) {
-		cFYI(1, ("Symbolic Link inode"));
-		tmp_inode->i_op = &cifs_symlink_inode_ops;
-/* tmp_inode->i_fop = *//* do not need to set to anything */
-	} else {
-		cFYI(1, ("Special inode"));
-		init_special_inode(tmp_inode, tmp_inode->i_mode,
-				   tmp_inode->i_rdev);
-	}
+	cifs_fill_common_info(fattr, cifs_sb);
 }
 
 /* BB eventually need to add the following helper function to
@@ -872,7 +621,7 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst,
 			len = strnlen(filename, PATH_MAX);
 		}
 
-		*pinum = le64_to_cpu(pFindData->UniqueId);
+		*pinum = le64_to_cpu(pFindData->basic.UniqueId);
 	} else if (level == SMB_FIND_FILE_DIRECTORY_INFO) {
 		FILE_DIRECTORY_INFO *pFindData =
 			(FILE_DIRECTORY_INFO *)current_entry;
@@ -932,11 +681,12 @@ static int cifs_filldir(char *pfindEntry, struct file *file, filldir_t filldir,
 	int rc = 0;
 	struct qstr qstring;
 	struct cifsFileInfo *pCifsF;
-	unsigned int obj_type;
-	__u64  inum;
+	u64    inum;
+	ino_t  ino;
+	struct super_block *sb;
 	struct cifs_sb_info *cifs_sb;
-	struct inode *tmp_inode;
 	struct dentry *tmp_dentry;
+	struct cifs_fattr fattr;
 
 	/* get filename and len into qstring */
 	/* get dentry */
@@ -954,60 +704,53 @@ static int cifs_filldir(char *pfindEntry, struct file *file, filldir_t filldir,
 	if (rc != 0)
 		return 0;
 
-	cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
+	sb = file->f_path.dentry->d_sb;
+	cifs_sb = CIFS_SB(sb);
 
 	qstring.name = scratch_buf;
 	rc = cifs_get_name_from_search_buf(&qstring, pfindEntry,
 			pCifsF->srch_inf.info_level,
 			pCifsF->srch_inf.unicode, cifs_sb,
-			max_len,
-			&inum /* returned */);
+			max_len, &inum /* returned */);
 
 	if (rc)
 		return rc;
 
-	/* only these two infolevels return valid inode numbers */
-	if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_UNIX ||
-	    pCifsF->srch_inf.info_level == SMB_FIND_FILE_ID_FULL_DIR_INFO)
-		rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry,
-					&inum);
-	else
-		rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry,
-					NULL);
-
-	if ((tmp_inode == NULL) || (tmp_dentry == NULL))
-		return -ENOMEM;
-
-	/* we pass in rc below, indicating whether it is a new inode,
-	   so we can figure out whether to invalidate the inode cached
-	   data if the file has changed */
 	if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_UNIX)
-		unix_fill_in_inode(tmp_inode,
-				   (FILE_UNIX_INFO *)pfindEntry,
-				   &obj_type, rc);
+		cifs_unix_basic_to_fattr(&fattr,
+				 &((FILE_UNIX_INFO *) pfindEntry)->basic,
+				 cifs_sb);
 	else if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_INFO_STANDARD)
-		fill_in_inode(tmp_inode, 0 /* old level 1 buffer type */,
-				pfindEntry, &obj_type, rc);
+		cifs_std_info_to_fattr(&fattr, (FIND_FILE_STANDARD_INFO *)
+					pfindEntry, cifs_sb);
 	else
-		fill_in_inode(tmp_inode, 1 /* NT */, pfindEntry, &obj_type, rc);
+		cifs_dir_info_to_fattr(&fattr, (FILE_DIRECTORY_INFO *)
+					pfindEntry, cifs_sb);
 
-	if (rc) /* new inode - needs to be tied to dentry */ {
-		d_instantiate(tmp_dentry, tmp_inode);
-		if (rc == 2)
-			d_rehash(tmp_dentry);
-	}
+	/* FIXME: make _to_fattr functions fill this out */
+	if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_ID_FULL_DIR_INFO)
+		fattr.cf_uniqueid = inum;
+	else
+		fattr.cf_uniqueid = iunique(sb, ROOT_I);
 
+	ino = cifs_uniqueid_to_ino_t(fattr.cf_uniqueid);
+	tmp_dentry = cifs_readdir_lookup(file->f_dentry, &qstring, &fattr);
 
 	rc = filldir(direntry, qstring.name, qstring.len, file->f_pos,
-		     tmp_inode->i_ino, obj_type);
+		     ino, fattr.cf_dtype);
+
+	/*
+	 * we can not return filldir errors to the caller since they are
+	 * "normal" when the stat blocksize is too small - we return remapped
+	 * error instead
+	 *
+	 * FIXME: This looks bogus. filldir returns -EOVERFLOW in the above
+	 * case already. Why should we be clobbering other errors from it?
+	 */
 	if (rc) {
 		cFYI(1, ("filldir rc = %d", rc));
-		/* we can not return filldir errors to the caller
-		since they are "normal" when the stat blocksize
-		is too small - we return remapped error instead */
 		rc = -EOVERFLOW;
 	}
-
 	dput(tmp_dentry);
 	return rc;
 }
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 897a052270f..7085a6275c4 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -802,7 +802,7 @@ ssetup_ntlmssp_authenticate:
 #endif /* CONFIG_CIFS_UPCALL */
 	} else {
 #ifdef CONFIG_CIFS_EXPERIMENTAL
-		if ((experimEnabled > 1) && (type == RawNTLMSSP)) {
+		if (type == RawNTLMSSP) {
 			if ((pSMB->req.hdr.Flags2 & SMBFLG2_UNICODE) == 0) {
 				cERROR(1, ("NTLMSSP requires Unicode support"));
 				rc = -ENOSYS;
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index e9527eedc63..a75afa3dd9e 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -64,8 +64,9 @@ int cifs_removexattr(struct dentry *direntry, const char *ea_name)
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 	if (ea_name == NULL) {
 		cFYI(1, ("Null xattr names not supported"));
@@ -118,8 +119,9 @@ int cifs_setxattr(struct dentry *direntry, const char *ea_name,
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 	/* return dos attributes as pseudo xattr */
 	/* return alt name if available as pseudo attr */
@@ -225,8 +227,9 @@ ssize_t cifs_getxattr(struct dentry *direntry, const char *ea_name,
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 	/* return dos attributes as pseudo xattr */
 	/* return alt name if available as pseudo attr */
@@ -351,8 +354,9 @@ ssize_t cifs_listxattr(struct dentry *direntry, char *data, size_t buf_size)
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 	/* return dos attributes as pseudo xattr */
 	/* return alt name if available as pseudo attr */
diff --git a/fs/compat.c b/fs/compat.c
index cdd51a3a7c5..6d6f98fe64a 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -32,7 +32,6 @@
 #include <linux/smb_mount.h>
 #include <linux/ncp_mount.h>
 #include <linux/nfs4_mount.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/ctype.h>
 #include <linux/module.h>
@@ -1486,20 +1485,15 @@ int compat_do_execve(char * filename,
 	if (!bprm)
 		goto out_files;
 
-	retval = mutex_lock_interruptible(&current->cred_guard_mutex);
-	if (retval < 0)
+	retval = prepare_bprm_creds(bprm);
+	if (retval)
 		goto out_free;
-	current->in_execve = 1;
-
-	retval = -ENOMEM;
-	bprm->cred = prepare_exec_creds();
-	if (!bprm->cred)
-		goto out_unlock;
 
 	retval = check_unsafe_exec(bprm);
 	if (retval < 0)
-		goto out_unlock;
+		goto out_free;
 	clear_in_exec = retval;
+	current->in_execve = 1;
 
 	file = open_exec(filename);
 	retval = PTR_ERR(file);
@@ -1548,7 +1542,6 @@ int compat_do_execve(char * filename,
 	/* execve succeeded */
 	current->fs->in_exec = 0;
 	current->in_execve = 0;
-	mutex_unlock(&current->cred_guard_mutex);
 	acct_update_integrals(current);
 	free_bprm(bprm);
 	if (displaced)
@@ -1568,10 +1561,7 @@ out_file:
 out_unmark:
 	if (clear_in_exec)
 		current->fs->in_exec = 0;
-
-out_unlock:
 	current->in_execve = 0;
-	mutex_unlock(&current->cred_guard_mutex);
 
 out_free:
 	free_bprm(bprm);
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 626c7483b4d..f91fd51b32e 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -19,6 +19,7 @@
 #include <linux/compiler.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
+#include <linux/smp_lock.h>
 #include <linux/ioctl.h>
 #include <linux/if.h>
 #include <linux/if_bridge.h>
@@ -1904,6 +1905,7 @@ COMPATIBLE_IOCTL(FIONCLEX)
 COMPATIBLE_IOCTL(FIOASYNC)
 COMPATIBLE_IOCTL(FIONBIO)
 COMPATIBLE_IOCTL(FIONREAD)  /* This is also TIOCINQ */
+COMPATIBLE_IOCTL(FS_IOC_FIEMAP)
 /* 0x00 */
 COMPATIBLE_IOCTL(FIBMAP)
 COMPATIBLE_IOCTL(FIGETBSZ)
diff --git a/fs/dlm/lock.c b/fs/dlm/lock.c
index 205ec95b347..eb507c453c5 100644
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -435,7 +435,7 @@ static int search_rsb(struct dlm_ls *ls, char *name, int len, int b,
 static int find_rsb(struct dlm_ls *ls, char *name, int namelen,
 		    unsigned int flags, struct dlm_rsb **r_ret)
 {
-	struct dlm_rsb *r, *tmp;
+	struct dlm_rsb *r = NULL, *tmp;
 	uint32_t hash, bucket;
 	int error = -EINVAL;
 
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index cdb580a9c7a..618a60f0388 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -902,7 +902,7 @@ static void tcp_connect_to_sock(struct connection *con)
 	int result = -EHOSTUNREACH;
 	struct sockaddr_storage saddr, src_addr;
 	int addr_len;
-	struct socket *sock;
+	struct socket *sock = NULL;
 
 	if (con->nodeid == 0) {
 		log_print("attempt to connect sock 0 foiled");
@@ -962,6 +962,8 @@ out_err:
 	if (con->sock) {
 		sock_release(con->sock);
 		con->sock = NULL;
+	} else if (sock) {
+		sock_release(sock);
 	}
 	/*
 	 * Some errors are fatal and this list might need adjusting. For other
diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c
index 894a32d438d..16f682e26c0 100644
--- a/fs/dlm/plock.c
+++ b/fs/dlm/plock.c
@@ -353,7 +353,7 @@ static ssize_t dev_write(struct file *file, const char __user *u, size_t count,
 {
 	struct dlm_plock_info info;
 	struct plock_op *op;
-	int found = 0;
+	int found = 0, do_callback = 0;
 
 	if (count != sizeof(info))
 		return -EINVAL;
@@ -366,21 +366,24 @@ static ssize_t dev_write(struct file *file, const char __user *u, size_t count,
 
 	spin_lock(&ops_lock);
 	list_for_each_entry(op, &recv_list, list) {
-		if (op->info.fsid == info.fsid && op->info.number == info.number &&
+		if (op->info.fsid == info.fsid &&
+		    op->info.number == info.number &&
 		    op->info.owner == info.owner) {
+			struct plock_xop *xop = (struct plock_xop *)op;
 			list_del_init(&op->list);
-			found = 1;
-			op->done = 1;
 			memcpy(&op->info, &info, sizeof(info));
+			if (xop->callback)
+				do_callback = 1;
+			else
+				op->done = 1;
+			found = 1;
 			break;
 		}
 	}
 	spin_unlock(&ops_lock);
 
 	if (found) {
-		struct plock_xop *xop;
-		xop = (struct plock_xop *)op;
-		if (xop->callback)
+		if (do_callback)
 			dlm_plock_callback(op);
 		else
 			wake_up(&recv_wq);
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index af737bb56cb..259525c9abb 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -1303,6 +1303,13 @@ parse_tag_3_packet(struct ecryptfs_crypt_stat *crypt_stat,
 	}
 	(*new_auth_tok)->session_key.encrypted_key_size =
 		(body_size - (ECRYPTFS_SALT_SIZE + 5));
+	if ((*new_auth_tok)->session_key.encrypted_key_size
+	    > ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES) {
+		printk(KERN_WARNING "Tag 3 packet contains key larger "
+		       "than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES\n");
+		rc = -EINVAL;
+		goto out_free;
+	}
 	if (unlikely(data[(*packet_size)++] != 0x04)) {
 		printk(KERN_WARNING "Unknown version number [%d]\n",
 		       data[(*packet_size) - 1]);
@@ -1449,6 +1456,12 @@ parse_tag_11_packet(unsigned char *data, unsigned char *contents,
 		rc = -EINVAL;
 		goto out;
 	}
+	if (unlikely((*tag_11_contents_size) > max_contents_bytes)) {
+		printk(KERN_ERR "Literal data section in tag 11 packet exceeds "
+		       "expected size\n");
+		rc = -EINVAL;
+		goto out;
+	}
 	if (data[(*packet_size)++] != 0x62) {
 		printk(KERN_WARNING "Unrecognizable packet\n");
 		rc = -EINVAL;
diff --git a/fs/eventfd.c b/fs/eventfd.c
index 3f0e1974abd..31d12de83a2 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -14,35 +14,44 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/anon_inodes.h>
-#include <linux/eventfd.h>
 #include <linux/syscalls.h>
 #include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/eventfd.h>
 
 struct eventfd_ctx {
+	struct kref kref;
 	wait_queue_head_t wqh;
 	/*
 	 * Every time that a write(2) is performed on an eventfd, the
 	 * value of the __u64 being written is added to "count" and a
 	 * wakeup is performed on "wqh". A read(2) will return the "count"
 	 * value to userspace, and will reset "count" to zero. The kernel
-	 * size eventfd_signal() also, adds to the "count" counter and
+	 * side eventfd_signal() also, adds to the "count" counter and
 	 * issue a wakeup.
 	 */
 	__u64 count;
 	unsigned int flags;
 };
 
-/*
- * Adds "n" to the eventfd counter "count". Returns "n" in case of
- * success, or a value lower then "n" in case of coutner overflow.
- * This function is supposed to be called by the kernel in paths
- * that do not allow sleeping. In this function we allow the counter
- * to reach the ULLONG_MAX value, and we signal this as overflow
- * condition by returining a POLLERR to poll(2).
+/**
+ * eventfd_signal - Adds @n to the eventfd counter.
+ * @ctx: [in] Pointer to the eventfd context.
+ * @n: [in] Value of the counter to be added to the eventfd internal counter.
+ *          The value cannot be negative.
+ *
+ * This function is supposed to be called by the kernel in paths that do not
+ * allow sleeping. In this function we allow the counter to reach the ULLONG_MAX
+ * value, and we signal this as overflow condition by returining a POLLERR
+ * to poll(2).
+ *
+ * Returns @n in case of success, a non-negative number lower than @n in case
+ * of overflow, or the following error codes:
+ *
+ * -EINVAL    : The value of @n is negative.
  */
-int eventfd_signal(struct file *file, int n)
+int eventfd_signal(struct eventfd_ctx *ctx, int n)
 {
-	struct eventfd_ctx *ctx = file->private_data;
 	unsigned long flags;
 
 	if (n < 0)
@@ -59,9 +68,45 @@ int eventfd_signal(struct file *file, int n)
 }
 EXPORT_SYMBOL_GPL(eventfd_signal);
 
+static void eventfd_free(struct kref *kref)
+{
+	struct eventfd_ctx *ctx = container_of(kref, struct eventfd_ctx, kref);
+
+	kfree(ctx);
+}
+
+/**
+ * eventfd_ctx_get - Acquires a reference to the internal eventfd context.
+ * @ctx: [in] Pointer to the eventfd context.
+ *
+ * Returns: In case of success, returns a pointer to the eventfd context.
+ */
+struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx)
+{
+	kref_get(&ctx->kref);
+	return ctx;
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_get);
+
+/**
+ * eventfd_ctx_put - Releases a reference to the internal eventfd context.
+ * @ctx: [in] Pointer to eventfd context.
+ *
+ * The eventfd context reference must have been previously acquired either
+ * with eventfd_ctx_get() or eventfd_ctx_fdget()).
+ */
+void eventfd_ctx_put(struct eventfd_ctx *ctx)
+{
+	kref_put(&ctx->kref, eventfd_free);
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_put);
+
 static int eventfd_release(struct inode *inode, struct file *file)
 {
-	kfree(file->private_data);
+	struct eventfd_ctx *ctx = file->private_data;
+
+	wake_up_poll(&ctx->wqh, POLLHUP);
+	eventfd_ctx_put(ctx);
 	return 0;
 }
 
@@ -185,6 +230,16 @@ static const struct file_operations eventfd_fops = {
 	.write		= eventfd_write,
 };
 
+/**
+ * eventfd_fget - Acquire a reference of an eventfd file descriptor.
+ * @fd: [in] Eventfd file descriptor.
+ *
+ * Returns a pointer to the eventfd file structure in case of success, or the
+ * following error pointer:
+ *
+ * -EBADF    : Invalid @fd file descriptor.
+ * -EINVAL   : The @fd file descriptor is not an eventfd file.
+ */
 struct file *eventfd_fget(int fd)
 {
 	struct file *file;
@@ -201,6 +256,48 @@ struct file *eventfd_fget(int fd)
 }
 EXPORT_SYMBOL_GPL(eventfd_fget);
 
+/**
+ * eventfd_ctx_fdget - Acquires a reference to the internal eventfd context.
+ * @fd: [in] Eventfd file descriptor.
+ *
+ * Returns a pointer to the internal eventfd context, otherwise the error
+ * pointers returned by the following functions:
+ *
+ * eventfd_fget
+ */
+struct eventfd_ctx *eventfd_ctx_fdget(int fd)
+{
+	struct file *file;
+	struct eventfd_ctx *ctx;
+
+	file = eventfd_fget(fd);
+	if (IS_ERR(file))
+		return (struct eventfd_ctx *) file;
+	ctx = eventfd_ctx_get(file->private_data);
+	fput(file);
+
+	return ctx;
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_fdget);
+
+/**
+ * eventfd_ctx_fileget - Acquires a reference to the internal eventfd context.
+ * @file: [in] Eventfd file pointer.
+ *
+ * Returns a pointer to the internal eventfd context, otherwise the error
+ * pointer:
+ *
+ * -EINVAL   : The @fd file descriptor is not an eventfd file.
+ */
+struct eventfd_ctx *eventfd_ctx_fileget(struct file *file)
+{
+	if (file->f_op != &eventfd_fops)
+		return ERR_PTR(-EINVAL);
+
+	return eventfd_ctx_get(file->private_data);
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_fileget);
+
 SYSCALL_DEFINE2(eventfd2, unsigned int, count, int, flags)
 {
 	int fd;
@@ -217,6 +314,7 @@ SYSCALL_DEFINE2(eventfd2, unsigned int, count, int, flags)
 	if (!ctx)
 		return -ENOMEM;
 
+	kref_init(&ctx->kref);
 	init_waitqueue_head(&ctx->wqh);
 	ctx->count = count;
 	ctx->flags = flags;
diff --git a/fs/exec.c b/fs/exec.c
index e639957d7a5..172ceb6edde 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -678,8 +678,8 @@ exit:
 }
 EXPORT_SYMBOL(open_exec);
 
-int kernel_read(struct file *file, unsigned long offset,
-	char *addr, unsigned long count)
+int kernel_read(struct file *file, loff_t offset,
+		char *addr, unsigned long count)
 {
 	mm_segment_t old_fs;
 	loff_t pos = offset;
@@ -1016,6 +1016,35 @@ out:
 EXPORT_SYMBOL(flush_old_exec);
 
 /*
+ * Prepare credentials and lock ->cred_guard_mutex.
+ * install_exec_creds() commits the new creds and drops the lock.
+ * Or, if exec fails before, free_bprm() should release ->cred and
+ * and unlock.
+ */
+int prepare_bprm_creds(struct linux_binprm *bprm)
+{
+	if (mutex_lock_interruptible(&current->cred_guard_mutex))
+		return -ERESTARTNOINTR;
+
+	bprm->cred = prepare_exec_creds();
+	if (likely(bprm->cred))
+		return 0;
+
+	mutex_unlock(&current->cred_guard_mutex);
+	return -ENOMEM;
+}
+
+void free_bprm(struct linux_binprm *bprm)
+{
+	free_arg_pages(bprm);
+	if (bprm->cred) {
+		mutex_unlock(&current->cred_guard_mutex);
+		abort_creds(bprm->cred);
+	}
+	kfree(bprm);
+}
+
+/*
  * install the new credentials for this executable
  */
 void install_exec_creds(struct linux_binprm *bprm)
@@ -1024,12 +1053,13 @@ void install_exec_creds(struct linux_binprm *bprm)
 
 	commit_creds(bprm->cred);
 	bprm->cred = NULL;
-
-	/* cred_guard_mutex must be held at least to this point to prevent
+	/*
+	 * cred_guard_mutex must be held at least to this point to prevent
 	 * ptrace_attach() from altering our determination of the task's
-	 * credentials; any time after this it may be unlocked */
-
+	 * credentials; any time after this it may be unlocked.
+	 */
 	security_bprm_committed_creds(bprm);
+	mutex_unlock(&current->cred_guard_mutex);
 }
 EXPORT_SYMBOL(install_exec_creds);
 
@@ -1246,14 +1276,6 @@ int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs)
 
 EXPORT_SYMBOL(search_binary_handler);
 
-void free_bprm(struct linux_binprm *bprm)
-{
-	free_arg_pages(bprm);
-	if (bprm->cred)
-		abort_creds(bprm->cred);
-	kfree(bprm);
-}
-
 /*
  * sys_execve() executes a new program.
  */
@@ -1277,20 +1299,15 @@ int do_execve(char * filename,
 	if (!bprm)
 		goto out_files;
 
-	retval = mutex_lock_interruptible(&current->cred_guard_mutex);
-	if (retval < 0)
+	retval = prepare_bprm_creds(bprm);
+	if (retval)
 		goto out_free;
-	current->in_execve = 1;
-
-	retval = -ENOMEM;
-	bprm->cred = prepare_exec_creds();
-	if (!bprm->cred)
-		goto out_unlock;
 
 	retval = check_unsafe_exec(bprm);
 	if (retval < 0)
-		goto out_unlock;
+		goto out_free;
 	clear_in_exec = retval;
+	current->in_execve = 1;
 
 	file = open_exec(filename);
 	retval = PTR_ERR(file);
@@ -1340,7 +1357,6 @@ int do_execve(char * filename,
 	/* execve succeeded */
 	current->fs->in_exec = 0;
 	current->in_execve = 0;
-	mutex_unlock(&current->cred_guard_mutex);
 	acct_update_integrals(current);
 	free_bprm(bprm);
 	if (displaced)
@@ -1360,10 +1376,7 @@ out_file:
 out_unmark:
 	if (clear_in_exec)
 		current->fs->in_exec = 0;
-
-out_unlock:
 	current->in_execve = 0;
-	mutex_unlock(&current->cred_guard_mutex);
 
 out_free:
 	free_bprm(bprm);
diff --git a/fs/exofs/common.h b/fs/exofs/common.h
index 24667eedc02..c6718e4817f 100644
--- a/fs/exofs/common.h
+++ b/fs/exofs/common.h
@@ -2,9 +2,7 @@
  * common.h - Common definitions for both Kernel and user-mode utilities
  *
  * Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
  * Copyright (C) 2008, 2009
  * Boaz Harrosh <bharrosh@panasas.com>
  *
diff --git a/fs/exofs/dir.c b/fs/exofs/dir.c
index 65b0c8c776a..4cfab1cc75c 100644
--- a/fs/exofs/dir.c
+++ b/fs/exofs/dir.c
@@ -1,8 +1,6 @@
 /*
  * Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
  * Copyright (C) 2008, 2009
  * Boaz Harrosh <bharrosh@panasas.com>
  *
diff --git a/fs/exofs/exofs.h b/fs/exofs/exofs.h
index 0fd4c785967..5ec72e020b2 100644
--- a/fs/exofs/exofs.h
+++ b/fs/exofs/exofs.h
@@ -1,8 +1,6 @@
 /*
  * Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
  * Copyright (C) 2008, 2009
  * Boaz Harrosh <bharrosh@panasas.com>
  *
@@ -156,6 +154,9 @@ ino_t exofs_parent_ino(struct dentry *child);
 int exofs_set_link(struct inode *, struct exofs_dir_entry *, struct page *,
 		    struct inode *);
 
+/* super.c               */
+int exofs_sync_fs(struct super_block *sb, int wait);
+
 /*********************
  * operation vectors *
  *********************/
diff --git a/fs/exofs/file.c b/fs/exofs/file.c
index 6ed7fe48475..839b9dc1e70 100644
--- a/fs/exofs/file.c
+++ b/fs/exofs/file.c
@@ -1,8 +1,6 @@
 /*
  * Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
  * Copyright (C) 2008, 2009
  * Boaz Harrosh <bharrosh@panasas.com>
  *
@@ -47,16 +45,23 @@ static int exofs_file_fsync(struct file *filp, struct dentry *dentry,
 {
 	int ret;
 	struct address_space *mapping = filp->f_mapping;
+	struct inode *inode = dentry->d_inode;
+	struct super_block *sb;
 
 	ret = filemap_write_and_wait(mapping);
 	if (ret)
 		return ret;
 
-	/*Note: file_fsync below also calles sync_blockdev, which is a no-op
-	 *      for exofs, but other then that it does sync_inode and
-	 *      sync_superblock which is what we need here.
-	 */
-	return file_fsync(filp, dentry, datasync);
+	/* sync the inode attributes */
+	ret = write_inode_now(inode, 1);
+
+	/* This is a good place to write the sb */
+	/* TODO: Sechedule an sb-sync on create */
+	sb = inode->i_sb;
+	if (sb->s_dirt)
+		exofs_sync_fs(sb, 1);
+
+	return ret;
 }
 
 static int exofs_flush(struct file *file, fl_owner_t id)
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index 77d0a295eb1..6c10f747669 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -1,8 +1,6 @@
 /*
  * Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
  * Copyright (C) 2008, 2009
  * Boaz Harrosh <bharrosh@panasas.com>
  *
@@ -295,6 +293,9 @@ static int read_exec(struct page_collect *pcol, bool is_sync)
 err:
 	if (!is_sync)
 		_unlock_pcol_pages(pcol, ret, READ);
+	else /* Pages unlocked by caller in sync mode only free bio */
+		pcol_free(pcol);
+
 	kfree(pcol_copy);
 	if (or)
 		osd_end_request(or);
diff --git a/fs/exofs/namei.c b/fs/exofs/namei.c
index 77fdd765e76..b7dd0c23686 100644
--- a/fs/exofs/namei.c
+++ b/fs/exofs/namei.c
@@ -1,8 +1,6 @@
 /*
  * Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
  * Copyright (C) 2008, 2009
  * Boaz Harrosh <bharrosh@panasas.com>
  *
diff --git a/fs/exofs/osd.c b/fs/exofs/osd.c
index b3d2ccb87aa..4372542df28 100644
--- a/fs/exofs/osd.c
+++ b/fs/exofs/osd.c
@@ -1,8 +1,6 @@
 /*
  * Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
  * Copyright (C) 2008, 2009
  * Boaz Harrosh <bharrosh@panasas.com>
  *
diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index 8216c5b77b5..5ab10c3bbeb 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -1,8 +1,6 @@
 /*
  * Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
  * Copyright (C) 2008, 2009
  * Boaz Harrosh <bharrosh@panasas.com>
  *
@@ -33,6 +31,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/parser.h>
 #include <linux/vfs.h>
@@ -200,7 +199,7 @@ static const struct export_operations exofs_export_ops;
 /*
  * Write the superblock to the OSD
  */
-static int exofs_sync_fs(struct super_block *sb, int wait)
+int exofs_sync_fs(struct super_block *sb, int wait)
 {
 	struct exofs_sb_info *sbi;
 	struct exofs_fscb *fscb;
diff --git a/fs/exofs/symlink.c b/fs/exofs/symlink.c
index 36e2d7bc7f7..4dd687c3e74 100644
--- a/fs/exofs/symlink.c
+++ b/fs/exofs/symlink.c
@@ -1,8 +1,6 @@
 /*
  * Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
  * Copyright (C) 2008, 2009
  * Boaz Harrosh <bharrosh@panasas.com>
  *
diff --git a/fs/ext2/ioctl.c b/fs/ext2/ioctl.c
index 7cb4badef92..e7431309bdc 100644
--- a/fs/ext2/ioctl.c
+++ b/fs/ext2/ioctl.c
@@ -13,7 +13,6 @@
 #include <linux/sched.h>
 #include <linux/compat.h>
 #include <linux/mount.h>
-#include <linux/smp_lock.h>
 #include <asm/current.h>
 #include <asm/uaccess.h>
 
diff --git a/fs/ext2/namei.c b/fs/ext2/namei.c
index 6524ecaebb7..78d9b925fc9 100644
--- a/fs/ext2/namei.c
+++ b/fs/ext2/namei.c
@@ -66,8 +66,16 @@ static struct dentry *ext2_lookup(struct inode * dir, struct dentry *dentry, str
 	inode = NULL;
 	if (ino) {
 		inode = ext2_iget(dir->i_sb, ino);
-		if (IS_ERR(inode))
-			return ERR_CAST(inode);
+		if (unlikely(IS_ERR(inode))) {
+			if (PTR_ERR(inode) == -ESTALE) {
+				ext2_error(dir->i_sb, __func__,
+						"deleted inode referenced: %lu",
+						ino);
+				return ERR_PTR(-EIO);
+			} else {
+				return ERR_CAST(inode);
+			}
+		}
 	}
 	return d_splice_alias(inode, dentry);
 }
@@ -354,6 +362,10 @@ static int ext2_rename (struct inode * old_dir, struct dentry * old_dentry,
 	if (dir_de) {
 		if (old_dir != new_dir)
 			ext2_set_link(old_inode, dir_de, dir_page, new_dir, 0);
+		else {
+			kunmap(dir_page);
+			page_cache_release(dir_page);
+		}
 		inode_dec_link_count(old_dir);
 	}
 	return 0;
diff --git a/fs/ext3/Kconfig b/fs/ext3/Kconfig
index fb3c1a21b13..522b15498f4 100644
--- a/fs/ext3/Kconfig
+++ b/fs/ext3/Kconfig
@@ -29,23 +29,25 @@ config EXT3_FS
 	  module will be called ext3.
 
 config EXT3_DEFAULTS_TO_ORDERED
-	bool "Default to 'data=ordered' in ext3 (legacy option)"
+	bool "Default to 'data=ordered' in ext3"
 	depends on EXT3_FS
 	help
-	  If a filesystem does not explicitly specify a data ordering
-	  mode, and the journal capability allowed it, ext3 used to
-	  historically default to 'data=ordered'.
-
-	  That was a rather unfortunate choice, because it leads to all
-	  kinds of latency problems, and the 'data=writeback' mode is more
-	  appropriate these days.
-
-	  You should probably always answer 'n' here, and if you really
-	  want to use 'data=ordered' mode, set it in the filesystem itself
-	  with 'tune2fs -o journal_data_ordered'.
-
-	  But if you really want to enable the legacy default, you can do
-	  so by answering 'y' to this question.
+	  The journal mode options for ext3 have different tradeoffs
+	  between when data is guaranteed to be on disk and
+	  performance.	The use of "data=writeback" can cause
+	  unwritten data to appear in files after an system crash or
+	  power failure, which can be a security issue.	 However,
+	  "data=ordered" mode can also result in major performance
+	  problems, including seconds-long delays before an fsync()
+	  call returns.	 For details, see:
+
+	  http://ext4.wiki.kernel.org/index.php/Ext3_data_mode_tradeoffs
+
+	  If you have been historically happy with ext3's performance,
+	  data=ordered mode will be a safe choice and you should
+	  answer 'y' here.  If you understand the reliability and data
+	  privacy issues of data=writeback and are willing to make
+	  that trade off, answer 'n'.
 
 config EXT3_FS_XATTR
 	bool "Ext3 extended attributes"
diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c
index 3d724a95882..373fa90c796 100644
--- a/fs/ext3/dir.c
+++ b/fs/ext3/dir.c
@@ -130,8 +130,7 @@ static int ext3_readdir(struct file * filp,
 		struct buffer_head *bh = NULL;
 
 		map_bh.b_state = 0;
-		err = ext3_get_blocks_handle(NULL, inode, blk, 1,
-						&map_bh, 0, 0);
+		err = ext3_get_blocks_handle(NULL, inode, blk, 1, &map_bh, 0);
 		if (err > 0) {
 			pgoff_t index = map_bh.b_blocknr >>
 					(PAGE_CACHE_SHIFT - inode->i_blkbits);
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 5f51fed5c75..b49908a167a 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -788,7 +788,7 @@ err_out:
 int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
 		sector_t iblock, unsigned long maxblocks,
 		struct buffer_head *bh_result,
-		int create, int extend_disksize)
+		int create)
 {
 	int err = -EIO;
 	int offsets[4];
@@ -911,13 +911,6 @@ int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
 	if (!err)
 		err = ext3_splice_branch(handle, inode, iblock,
 					partial, indirect_blks, count);
-	/*
-	 * i_disksize growing is protected by truncate_mutex.  Don't forget to
-	 * protect it if you're about to implement concurrent
-	 * ext3_get_block() -bzzz
-	*/
-	if (!err && extend_disksize && inode->i_size > ei->i_disksize)
-		ei->i_disksize = inode->i_size;
 	mutex_unlock(&ei->truncate_mutex);
 	if (err)
 		goto cleanup;
@@ -972,7 +965,7 @@ static int ext3_get_block(struct inode *inode, sector_t iblock,
 	}
 
 	ret = ext3_get_blocks_handle(handle, inode, iblock,
-					max_blocks, bh_result, create, 0);
+					max_blocks, bh_result, create);
 	if (ret > 0) {
 		bh_result->b_size = (ret << inode->i_blkbits);
 		ret = 0;
@@ -1005,7 +998,7 @@ struct buffer_head *ext3_getblk(handle_t *handle, struct inode *inode,
 	dummy.b_blocknr = -1000;
 	buffer_trace_init(&dummy.b_history);
 	err = ext3_get_blocks_handle(handle, inode, block, 1,
-					&dummy, create, 1);
+					&dummy, create);
 	/*
 	 * ext3_get_blocks_handle() returns number of blocks
 	 * mapped. 0 in case of a HOLE.
@@ -1193,15 +1186,16 @@ write_begin_failed:
 		 * i_size_read because we hold i_mutex.
 		 *
 		 * Add inode to orphan list in case we crash before truncate
-		 * finishes.
+		 * finishes. Do this only if ext3_can_truncate() agrees so
+		 * that orphan processing code is happy.
 		 */
-		if (pos + len > inode->i_size)
+		if (pos + len > inode->i_size && ext3_can_truncate(inode))
 			ext3_orphan_add(handle, inode);
 		ext3_journal_stop(handle);
 		unlock_page(page);
 		page_cache_release(page);
 		if (pos + len > inode->i_size)
-			vmtruncate(inode, inode->i_size);
+			ext3_truncate(inode);
 	}
 	if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries))
 		goto retry;
@@ -1287,7 +1281,7 @@ static int ext3_ordered_write_end(struct file *file,
 	 * There may be allocated blocks outside of i_size because
 	 * we failed to copy some data. Prepare for truncate.
 	 */
-	if (pos + len > inode->i_size)
+	if (pos + len > inode->i_size && ext3_can_truncate(inode))
 		ext3_orphan_add(handle, inode);
 	ret2 = ext3_journal_stop(handle);
 	if (!ret)
@@ -1296,7 +1290,7 @@ static int ext3_ordered_write_end(struct file *file,
 	page_cache_release(page);
 
 	if (pos + len > inode->i_size)
-		vmtruncate(inode, inode->i_size);
+		ext3_truncate(inode);
 	return ret ? ret : copied;
 }
 
@@ -1315,14 +1309,14 @@ static int ext3_writeback_write_end(struct file *file,
 	 * There may be allocated blocks outside of i_size because
 	 * we failed to copy some data. Prepare for truncate.
 	 */
-	if (pos + len > inode->i_size)
+	if (pos + len > inode->i_size && ext3_can_truncate(inode))
 		ext3_orphan_add(handle, inode);
 	ret = ext3_journal_stop(handle);
 	unlock_page(page);
 	page_cache_release(page);
 
 	if (pos + len > inode->i_size)
-		vmtruncate(inode, inode->i_size);
+		ext3_truncate(inode);
 	return ret ? ret : copied;
 }
 
@@ -1358,7 +1352,7 @@ static int ext3_journalled_write_end(struct file *file,
 	 * There may be allocated blocks outside of i_size because
 	 * we failed to copy some data. Prepare for truncate.
 	 */
-	if (pos + len > inode->i_size)
+	if (pos + len > inode->i_size && ext3_can_truncate(inode))
 		ext3_orphan_add(handle, inode);
 	EXT3_I(inode)->i_state |= EXT3_STATE_JDATA;
 	if (inode->i_size > EXT3_I(inode)->i_disksize) {
@@ -1375,7 +1369,7 @@ static int ext3_journalled_write_end(struct file *file,
 	page_cache_release(page);
 
 	if (pos + len > inode->i_size)
-		vmtruncate(inode, inode->i_size);
+		ext3_truncate(inode);
 	return ret ? ret : copied;
 }
 
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 524b349c629..a8d80a7f110 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -543,6 +543,19 @@ static inline void ext3_show_quota_options(struct seq_file *seq, struct super_bl
 #endif
 }
 
+static char *data_mode_string(unsigned long mode)
+{
+	switch (mode) {
+	case EXT3_MOUNT_JOURNAL_DATA:
+		return "journal";
+	case EXT3_MOUNT_ORDERED_DATA:
+		return "ordered";
+	case EXT3_MOUNT_WRITEBACK_DATA:
+		return "writeback";
+	}
+	return "unknown";
+}
+
 /*
  * Show an option if
  *  - it's set to a non-default value OR
@@ -616,13 +629,8 @@ static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	if (test_opt(sb, NOBH))
 		seq_puts(seq, ",nobh");
 
-	if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA)
-		seq_puts(seq, ",data=journal");
-	else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA)
-		seq_puts(seq, ",data=ordered");
-	else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
-		seq_puts(seq, ",data=writeback");
-
+	seq_printf(seq, ",data=%s", data_mode_string(sbi->s_mount_opt &
+						     EXT3_MOUNT_DATA_FLAGS));
 	if (test_opt(sb, DATA_ERR_ABORT))
 		seq_puts(seq, ",data_err=abort");
 
@@ -1024,12 +1032,18 @@ static int parse_options (char *options, struct super_block *sb,
 		datacheck:
 			if (is_remount) {
 				if ((sbi->s_mount_opt & EXT3_MOUNT_DATA_FLAGS)
-						!= data_opt) {
-					printk(KERN_ERR
-						"EXT3-fs: cannot change data "
-						"mode on remount\n");
-					return 0;
-				}
+						== data_opt)
+					break;
+				printk(KERN_ERR
+					"EXT3-fs (device %s): Cannot change "
+					"data mode on remount. The filesystem "
+					"is mounted in data=%s mode and you "
+					"try to remount it in data=%s mode.\n",
+					sb->s_id,
+					data_mode_string(sbi->s_mount_opt &
+							EXT3_MOUNT_DATA_FLAGS),
+					data_mode_string(data_opt));
+				return 0;
 			} else {
 				sbi->s_mount_opt &= ~EXT3_MOUNT_DATA_FLAGS;
 				sbi->s_mount_opt |= data_opt;
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 0ddf7e55abe..9714db393ef 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -93,20 +93,20 @@ typedef unsigned int ext4_group_t;
 struct ext4_allocation_request {
 	/* target inode for block we're allocating */
 	struct inode *inode;
+	/* how many blocks we want to allocate */
+	unsigned int len;
 	/* logical block in target inode */
 	ext4_lblk_t logical;
-	/* phys. target (a hint) */
-	ext4_fsblk_t goal;
 	/* the closest logical allocated block to the left */
 	ext4_lblk_t lleft;
-	/* phys. block for ^^^ */
-	ext4_fsblk_t pleft;
 	/* the closest logical allocated block to the right */
 	ext4_lblk_t lright;
-	/* phys. block for ^^^ */
+	/* phys. target (a hint) */
+	ext4_fsblk_t goal;
+	/* phys. block for the closest logical allocated block to the left */
+	ext4_fsblk_t pleft;
+	/* phys. block for the closest logical allocated block to the right */
 	ext4_fsblk_t pright;
-	/* how many blocks we want to allocate */
-	unsigned int len;
 	/* flags. see above EXT4_MB_HINT_* */
 	unsigned int flags;
 };
diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c
index ad13a84644e..eb27fd0f2ee 100644
--- a/fs/ext4/ext4_jbd2.c
+++ b/fs/ext4/ext4_jbd2.c
@@ -43,6 +43,8 @@ int __ext4_journal_forget(const char *where, handle_t *handle,
 			ext4_journal_abort_handle(where, __func__, bh,
 						  handle, err);
 	}
+	else
+		brelse(bh);
 	return err;
 }
 
@@ -57,6 +59,8 @@ int __ext4_journal_revoke(const char *where, handle_t *handle,
 			ext4_journal_abort_handle(where, __func__, bh,
 						  handle, err);
 	}
+	else
+		brelse(bh);
 	return err;
 }
 
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index be2f426f680..139fb8cb87e 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -131,9 +131,11 @@ int __ext4_journal_get_undo_access(const char *where, handle_t *handle,
 int __ext4_journal_get_write_access(const char *where, handle_t *handle,
 				struct buffer_head *bh);
 
+/* When called with an invalid handle, this will still do a put on the BH */
 int __ext4_journal_forget(const char *where, handle_t *handle,
 				struct buffer_head *bh);
 
+/* When called with an invalid handle, this will still do a put on the BH */
 int __ext4_journal_revoke(const char *where, handle_t *handle,
 				ext4_fsblk_t blocknr, struct buffer_head *bh);
 
@@ -281,10 +283,10 @@ static inline int ext4_should_order_data(struct inode *inode)
 
 static inline int ext4_should_writeback_data(struct inode *inode)
 {
-	if (EXT4_JOURNAL(inode) == NULL)
-		return 0;
 	if (!S_ISREG(inode->i_mode))
 		return 0;
+	if (EXT4_JOURNAL(inode) == NULL)
+		return 1;
 	if (EXT4_I(inode)->i_flags & EXT4_JOURNAL_DATA_FL)
 		return 0;
 	if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 50322a09bd0..73ebfb44ad7 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1977,6 +1977,7 @@ int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int nrblocks,
 			 */
 			/* 1 bitmap, 1 block group descriptor */
 			ret = 2 + EXT4_META_TRANS_BLOCKS(inode->i_sb);
+			return ret;
 		}
 	}
 
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 2f645732e3b..29e6dc7299b 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -833,7 +833,7 @@ struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode,
 	if (!goal)
 		goal = sbi->s_inode_goal;
 
-	if (goal && goal < le32_to_cpu(sbi->s_es->s_inodes_count)) {
+	if (goal && goal <= le32_to_cpu(sbi->s_es->s_inodes_count)) {
 		group = (goal - 1) / EXT4_INODES_PER_GROUP(sb);
 		ino = (goal - 1) % EXT4_INODES_PER_GROUP(sb);
 		ret2 = 0;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 60a26f3a6f8..f9c642b22ef 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -78,16 +78,14 @@ static int ext4_inode_is_fast_symlink(struct inode *inode)
  * but there may still be a record of it in the journal, and that record
  * still needs to be revoked.
  *
- * If the handle isn't valid we're not journaling so there's nothing to do.
+ * If the handle isn't valid we're not journaling, but we still need to
+ * call into ext4_journal_revoke() to put the buffer head.
  */
 int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode,
 		struct buffer_head *bh, ext4_fsblk_t blocknr)
 {
 	int err;
 
-	if (!ext4_handle_valid(handle))
-		return 0;
-
 	might_sleep();
 
 	BUFFER_TRACE(bh, "enter");
@@ -1513,14 +1511,14 @@ retry:
 		 * Add inode to orphan list in case we crash before
 		 * truncate finishes
 		 */
-		if (pos + len > inode->i_size)
+		if (pos + len > inode->i_size && ext4_can_truncate(inode))
 			ext4_orphan_add(handle, inode);
 
 		ext4_journal_stop(handle);
 		if (pos + len > inode->i_size) {
-			vmtruncate(inode, inode->i_size);
+			ext4_truncate(inode);
 			/*
-			 * If vmtruncate failed early the inode might
+			 * If truncate failed early the inode might
 			 * still be on the orphan list; we need to
 			 * make sure the inode is removed from the
 			 * orphan list in that case.
@@ -1614,7 +1612,7 @@ static int ext4_ordered_write_end(struct file *file,
 		ret2 = ext4_generic_write_end(file, mapping, pos, len, copied,
 							page, fsdata);
 		copied = ret2;
-		if (pos + len > inode->i_size)
+		if (pos + len > inode->i_size && ext4_can_truncate(inode))
 			/* if we have allocated more blocks and copied
 			 * less. We will have blocks allocated outside
 			 * inode->i_size. So truncate them
@@ -1628,9 +1626,9 @@ static int ext4_ordered_write_end(struct file *file,
 		ret = ret2;
 
 	if (pos + len > inode->i_size) {
-		vmtruncate(inode, inode->i_size);
+		ext4_truncate(inode);
 		/*
-		 * If vmtruncate failed early the inode might still be
+		 * If truncate failed early the inode might still be
 		 * on the orphan list; we need to make sure the inode
 		 * is removed from the orphan list in that case.
 		 */
@@ -1655,7 +1653,7 @@ static int ext4_writeback_write_end(struct file *file,
 	ret2 = ext4_generic_write_end(file, mapping, pos, len, copied,
 							page, fsdata);
 	copied = ret2;
-	if (pos + len > inode->i_size)
+	if (pos + len > inode->i_size && ext4_can_truncate(inode))
 		/* if we have allocated more blocks and copied
 		 * less. We will have blocks allocated outside
 		 * inode->i_size. So truncate them
@@ -1670,9 +1668,9 @@ static int ext4_writeback_write_end(struct file *file,
 		ret = ret2;
 
 	if (pos + len > inode->i_size) {
-		vmtruncate(inode, inode->i_size);
+		ext4_truncate(inode);
 		/*
-		 * If vmtruncate failed early the inode might still be
+		 * If truncate failed early the inode might still be
 		 * on the orphan list; we need to make sure the inode
 		 * is removed from the orphan list in that case.
 		 */
@@ -1722,7 +1720,7 @@ static int ext4_journalled_write_end(struct file *file,
 
 	unlock_page(page);
 	page_cache_release(page);
-	if (pos + len > inode->i_size)
+	if (pos + len > inode->i_size && ext4_can_truncate(inode))
 		/* if we have allocated more blocks and copied
 		 * less. We will have blocks allocated outside
 		 * inode->i_size. So truncate them
@@ -1733,9 +1731,9 @@ static int ext4_journalled_write_end(struct file *file,
 	if (!ret)
 		ret = ret2;
 	if (pos + len > inode->i_size) {
-		vmtruncate(inode, inode->i_size);
+		ext4_truncate(inode);
 		/*
-		 * If vmtruncate failed early the inode might still be
+		 * If truncate failed early the inode might still be
 		 * on the orphan list; we need to make sure the inode
 		 * is removed from the orphan list in that case.
 		 */
@@ -2305,15 +2303,9 @@ flush_it:
 	return;
 }
 
-static int ext4_bh_unmapped_or_delay(handle_t *handle, struct buffer_head *bh)
+static int ext4_bh_delay_or_unwritten(handle_t *handle, struct buffer_head *bh)
 {
-	/*
-	 * unmapped buffer is possible for holes.
-	 * delay buffer is possible with delayed allocation.
-	 * We also need to consider unwritten buffer as unmapped.
-	 */
-	return (!buffer_mapped(bh) || buffer_delay(bh) ||
-				buffer_unwritten(bh)) && buffer_dirty(bh);
+	return (buffer_delay(bh) || buffer_unwritten(bh)) && buffer_dirty(bh);
 }
 
 /*
@@ -2398,9 +2390,9 @@ static int __mpage_da_writepage(struct page *page,
 			 * We need to try to allocate
 			 * unmapped blocks in the same page.
 			 * Otherwise we won't make progress
-			 * with the page in ext4_da_writepage
+			 * with the page in ext4_writepage
 			 */
-			if (ext4_bh_unmapped_or_delay(NULL, bh)) {
+			if (ext4_bh_delay_or_unwritten(NULL, bh)) {
 				mpage_add_bh_to_extent(mpd, logical,
 						       bh->b_size,
 						       bh->b_state);
@@ -2517,7 +2509,6 @@ static int noalloc_get_block_write(struct inode *inode, sector_t iblock,
 	 * so call get_block_wrap with create = 0
 	 */
 	ret = ext4_get_blocks(NULL, inode, iblock, max_blocks, bh_result, 0);
-	BUG_ON(create && ret == 0);
 	if (ret > 0) {
 		bh_result->b_size = (ret << inode->i_blkbits);
 		ret = 0;
@@ -2525,15 +2516,102 @@ static int noalloc_get_block_write(struct inode *inode, sector_t iblock,
 	return ret;
 }
 
+static int bget_one(handle_t *handle, struct buffer_head *bh)
+{
+	get_bh(bh);
+	return 0;
+}
+
+static int bput_one(handle_t *handle, struct buffer_head *bh)
+{
+	put_bh(bh);
+	return 0;
+}
+
+static int __ext4_journalled_writepage(struct page *page,
+				       struct writeback_control *wbc,
+				       unsigned int len)
+{
+	struct address_space *mapping = page->mapping;
+	struct inode *inode = mapping->host;
+	struct buffer_head *page_bufs;
+	handle_t *handle = NULL;
+	int ret = 0;
+	int err;
+
+	page_bufs = page_buffers(page);
+	BUG_ON(!page_bufs);
+	walk_page_buffers(handle, page_bufs, 0, len, NULL, bget_one);
+	/* As soon as we unlock the page, it can go away, but we have
+	 * references to buffers so we are safe */
+	unlock_page(page);
+
+	handle = ext4_journal_start(inode, ext4_writepage_trans_blocks(inode));
+	if (IS_ERR(handle)) {
+		ret = PTR_ERR(handle);
+		goto out;
+	}
+
+	ret = walk_page_buffers(handle, page_bufs, 0, len, NULL,
+				do_journal_get_write_access);
+
+	err = walk_page_buffers(handle, page_bufs, 0, len, NULL,
+				write_end_fn);
+	if (ret == 0)
+		ret = err;
+	err = ext4_journal_stop(handle);
+	if (!ret)
+		ret = err;
+
+	walk_page_buffers(handle, page_bufs, 0, len, NULL, bput_one);
+	EXT4_I(inode)->i_state |= EXT4_STATE_JDATA;
+out:
+	return ret;
+}
+
 /*
+ * Note that we don't need to start a transaction unless we're journaling data
+ * because we should have holes filled from ext4_page_mkwrite(). We even don't
+ * need to file the inode to the transaction's list in ordered mode because if
+ * we are writing back data added by write(), the inode is already there and if
+ * we are writing back data modified via mmap(), noone guarantees in which
+ * transaction the data will hit the disk. In case we are journaling data, we
+ * cannot start transaction directly because transaction start ranks above page
+ * lock so we have to do some magic.
+ *
  * This function can get called via...
  *   - ext4_da_writepages after taking page lock (have journal handle)
  *   - journal_submit_inode_data_buffers (no journal handle)
  *   - shrink_page_list via pdflush (no journal handle)
  *   - grab_page_cache when doing write_begin (have journal handle)
+ *
+ * We don't do any block allocation in this function. If we have page with
+ * multiple blocks we need to write those buffer_heads that are mapped. This
+ * is important for mmaped based write. So if we do with blocksize 1K
+ * truncate(f, 1024);
+ * a = mmap(f, 0, 4096);
+ * a[0] = 'a';
+ * truncate(f, 4096);
+ * we have in the page first buffer_head mapped via page_mkwrite call back
+ * but other bufer_heads would be unmapped but dirty(dirty done via the
+ * do_wp_page). So writepage should write the first block. If we modify
+ * the mmap area beyond 1024 we will again get a page_fault and the
+ * page_mkwrite callback will do the block allocation and mark the
+ * buffer_heads mapped.
+ *
+ * We redirty the page if we have any buffer_heads that is either delay or
+ * unwritten in the page.
+ *
+ * We can get recursively called as show below.
+ *
+ *	ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() ->
+ *		ext4_writepage()
+ *
+ * But since we don't do any block allocation we should not deadlock.
+ * Page also have the dirty flag cleared so we don't get recurive page_lock.
  */
-static int ext4_da_writepage(struct page *page,
-				struct writeback_control *wbc)
+static int ext4_writepage(struct page *page,
+			  struct writeback_control *wbc)
 {
 	int ret = 0;
 	loff_t size;
@@ -2541,7 +2619,7 @@ static int ext4_da_writepage(struct page *page,
 	struct buffer_head *page_bufs;
 	struct inode *inode = page->mapping->host;
 
-	trace_ext4_da_writepage(inode, page);
+	trace_ext4_writepage(inode, page);
 	size = i_size_read(inode);
 	if (page->index == size >> PAGE_CACHE_SHIFT)
 		len = size & ~PAGE_CACHE_MASK;
@@ -2551,7 +2629,7 @@ static int ext4_da_writepage(struct page *page,
 	if (page_has_buffers(page)) {
 		page_bufs = page_buffers(page);
 		if (walk_page_buffers(NULL, page_bufs, 0, len, NULL,
-					ext4_bh_unmapped_or_delay)) {
+					ext4_bh_delay_or_unwritten)) {
 			/*
 			 * We don't want to do  block allocation
 			 * So redirty the page and return
@@ -2578,13 +2656,13 @@ static int ext4_da_writepage(struct page *page,
 		 * all are mapped and non delay. We don't want to
 		 * do block allocation here.
 		 */
-		ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE,
+		ret = block_prepare_write(page, 0, len,
 					  noalloc_get_block_write);
 		if (!ret) {
 			page_bufs = page_buffers(page);
 			/* check whether all are mapped and non delay */
 			if (walk_page_buffers(NULL, page_bufs, 0, len, NULL,
-						ext4_bh_unmapped_or_delay)) {
+						ext4_bh_delay_or_unwritten)) {
 				redirty_page_for_writepage(wbc, page);
 				unlock_page(page);
 				return 0;
@@ -2600,7 +2678,16 @@ static int ext4_da_writepage(struct page *page,
 			return 0;
 		}
 		/* now mark the buffer_heads as dirty and uptodate */
-		block_commit_write(page, 0, PAGE_CACHE_SIZE);
+		block_commit_write(page, 0, len);
+	}
+
+	if (PageChecked(page) && ext4_should_journal_data(inode)) {
+		/*
+		 * It's mmapped pagecache.  Add buffers and journal it.  There
+		 * doesn't seem much point in redirtying the page here.
+		 */
+		ClearPageChecked(page);
+		return __ext4_journalled_writepage(page, wbc, len);
 	}
 
 	if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode))
@@ -2907,7 +2994,7 @@ retry:
 		 * i_size_read because we hold i_mutex.
 		 */
 		if (pos + len > inode->i_size)
-			vmtruncate(inode, inode->i_size);
+			ext4_truncate(inode);
 	}
 
 	if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
@@ -3130,222 +3217,6 @@ static sector_t ext4_bmap(struct address_space *mapping, sector_t block)
 	return generic_block_bmap(mapping, block, ext4_get_block);
 }
 
-static int bget_one(handle_t *handle, struct buffer_head *bh)
-{
-	get_bh(bh);
-	return 0;
-}
-
-static int bput_one(handle_t *handle, struct buffer_head *bh)
-{
-	put_bh(bh);
-	return 0;
-}
-
-/*
- * Note that we don't need to start a transaction unless we're journaling data
- * because we should have holes filled from ext4_page_mkwrite(). We even don't
- * need to file the inode to the transaction's list in ordered mode because if
- * we are writing back data added by write(), the inode is already there and if
- * we are writing back data modified via mmap(), noone guarantees in which
- * transaction the data will hit the disk. In case we are journaling data, we
- * cannot start transaction directly because transaction start ranks above page
- * lock so we have to do some magic.
- *
- * In all journaling modes block_write_full_page() will start the I/O.
- *
- * Problem:
- *
- *	ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() ->
- *		ext4_writepage()
- *
- * Similar for:
- *
- *	ext4_file_write() -> generic_file_write() -> __alloc_pages() -> ...
- *
- * Same applies to ext4_get_block().  We will deadlock on various things like
- * lock_journal and i_data_sem
- *
- * Setting PF_MEMALLOC here doesn't work - too many internal memory
- * allocations fail.
- *
- * 16May01: If we're reentered then journal_current_handle() will be
- *	    non-zero. We simply *return*.
- *
- * 1 July 2001: @@@ FIXME:
- *   In journalled data mode, a data buffer may be metadata against the
- *   current transaction.  But the same file is part of a shared mapping
- *   and someone does a writepage() on it.
- *
- *   We will move the buffer onto the async_data list, but *after* it has
- *   been dirtied. So there's a small window where we have dirty data on
- *   BJ_Metadata.
- *
- *   Note that this only applies to the last partial page in the file.  The
- *   bit which block_write_full_page() uses prepare/commit for.  (That's
- *   broken code anyway: it's wrong for msync()).
- *
- *   It's a rare case: affects the final partial page, for journalled data
- *   where the file is subject to bith write() and writepage() in the same
- *   transction.  To fix it we'll need a custom block_write_full_page().
- *   We'll probably need that anyway for journalling writepage() output.
- *
- * We don't honour synchronous mounts for writepage().  That would be
- * disastrous.  Any write() or metadata operation will sync the fs for
- * us.
- *
- */
-static int __ext4_normal_writepage(struct page *page,
-				   struct writeback_control *wbc)
-{
-	struct inode *inode = page->mapping->host;
-
-	if (test_opt(inode->i_sb, NOBH))
-		return nobh_writepage(page, noalloc_get_block_write, wbc);
-	else
-		return block_write_full_page(page, noalloc_get_block_write,
-					     wbc);
-}
-
-static int ext4_normal_writepage(struct page *page,
-				 struct writeback_control *wbc)
-{
-	struct inode *inode = page->mapping->host;
-	loff_t size = i_size_read(inode);
-	loff_t len;
-
-	trace_ext4_normal_writepage(inode, page);
-	J_ASSERT(PageLocked(page));
-	if (page->index == size >> PAGE_CACHE_SHIFT)
-		len = size & ~PAGE_CACHE_MASK;
-	else
-		len = PAGE_CACHE_SIZE;
-
-	if (page_has_buffers(page)) {
-		/* if page has buffers it should all be mapped
-		 * and allocated. If there are not buffers attached
-		 * to the page we know the page is dirty but it lost
-		 * buffers. That means that at some moment in time
-		 * after write_begin() / write_end() has been called
-		 * all buffers have been clean and thus they must have been
-		 * written at least once. So they are all mapped and we can
-		 * happily proceed with mapping them and writing the page.
-		 */
-		BUG_ON(walk_page_buffers(NULL, page_buffers(page), 0, len, NULL,
-					ext4_bh_unmapped_or_delay));
-	}
-
-	if (!ext4_journal_current_handle())
-		return __ext4_normal_writepage(page, wbc);
-
-	redirty_page_for_writepage(wbc, page);
-	unlock_page(page);
-	return 0;
-}
-
-static int __ext4_journalled_writepage(struct page *page,
-				       struct writeback_control *wbc)
-{
-	struct address_space *mapping = page->mapping;
-	struct inode *inode = mapping->host;
-	struct buffer_head *page_bufs;
-	handle_t *handle = NULL;
-	int ret = 0;
-	int err;
-
-	ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE,
-				  noalloc_get_block_write);
-	if (ret != 0)
-		goto out_unlock;
-
-	page_bufs = page_buffers(page);
-	walk_page_buffers(handle, page_bufs, 0, PAGE_CACHE_SIZE, NULL,
-								bget_one);
-	/* As soon as we unlock the page, it can go away, but we have
-	 * references to buffers so we are safe */
-	unlock_page(page);
-
-	handle = ext4_journal_start(inode, ext4_writepage_trans_blocks(inode));
-	if (IS_ERR(handle)) {
-		ret = PTR_ERR(handle);
-		goto out;
-	}
-
-	ret = walk_page_buffers(handle, page_bufs, 0,
-			PAGE_CACHE_SIZE, NULL, do_journal_get_write_access);
-
-	err = walk_page_buffers(handle, page_bufs, 0,
-				PAGE_CACHE_SIZE, NULL, write_end_fn);
-	if (ret == 0)
-		ret = err;
-	err = ext4_journal_stop(handle);
-	if (!ret)
-		ret = err;
-
-	walk_page_buffers(handle, page_bufs, 0,
-				PAGE_CACHE_SIZE, NULL, bput_one);
-	EXT4_I(inode)->i_state |= EXT4_STATE_JDATA;
-	goto out;
-
-out_unlock:
-	unlock_page(page);
-out:
-	return ret;
-}
-
-static int ext4_journalled_writepage(struct page *page,
-				     struct writeback_control *wbc)
-{
-	struct inode *inode = page->mapping->host;
-	loff_t size = i_size_read(inode);
-	loff_t len;
-
-	trace_ext4_journalled_writepage(inode, page);
-	J_ASSERT(PageLocked(page));
-	if (page->index == size >> PAGE_CACHE_SHIFT)
-		len = size & ~PAGE_CACHE_MASK;
-	else
-		len = PAGE_CACHE_SIZE;
-
-	if (page_has_buffers(page)) {
-		/* if page has buffers it should all be mapped
-		 * and allocated. If there are not buffers attached
-		 * to the page we know the page is dirty but it lost
-		 * buffers. That means that at some moment in time
-		 * after write_begin() / write_end() has been called
-		 * all buffers have been clean and thus they must have been
-		 * written at least once. So they are all mapped and we can
-		 * happily proceed with mapping them and writing the page.
-		 */
-		BUG_ON(walk_page_buffers(NULL, page_buffers(page), 0, len, NULL,
-					ext4_bh_unmapped_or_delay));
-	}
-
-	if (ext4_journal_current_handle())
-		goto no_write;
-
-	if (PageChecked(page)) {
-		/*
-		 * It's mmapped pagecache.  Add buffers and journal it.  There
-		 * doesn't seem much point in redirtying the page here.
-		 */
-		ClearPageChecked(page);
-		return __ext4_journalled_writepage(page, wbc);
-	} else {
-		/*
-		 * It may be a page full of checkpoint-mode buffers.  We don't
-		 * really know unless we go poke around in the buffer_heads.
-		 * But block_write_full_page will do the right thing.
-		 */
-		return block_write_full_page(page, noalloc_get_block_write,
-					     wbc);
-	}
-no_write:
-	redirty_page_for_writepage(wbc, page);
-	unlock_page(page);
-	return 0;
-}
-
 static int ext4_readpage(struct file *file, struct page *page)
 {
 	return mpage_readpage(page, ext4_get_block);
@@ -3492,7 +3363,7 @@ static int ext4_journalled_set_page_dirty(struct page *page)
 static const struct address_space_operations ext4_ordered_aops = {
 	.readpage		= ext4_readpage,
 	.readpages		= ext4_readpages,
-	.writepage		= ext4_normal_writepage,
+	.writepage		= ext4_writepage,
 	.sync_page		= block_sync_page,
 	.write_begin		= ext4_write_begin,
 	.write_end		= ext4_ordered_write_end,
@@ -3507,7 +3378,7 @@ static const struct address_space_operations ext4_ordered_aops = {
 static const struct address_space_operations ext4_writeback_aops = {
 	.readpage		= ext4_readpage,
 	.readpages		= ext4_readpages,
-	.writepage		= ext4_normal_writepage,
+	.writepage		= ext4_writepage,
 	.sync_page		= block_sync_page,
 	.write_begin		= ext4_write_begin,
 	.write_end		= ext4_writeback_write_end,
@@ -3522,7 +3393,7 @@ static const struct address_space_operations ext4_writeback_aops = {
 static const struct address_space_operations ext4_journalled_aops = {
 	.readpage		= ext4_readpage,
 	.readpages		= ext4_readpages,
-	.writepage		= ext4_journalled_writepage,
+	.writepage		= ext4_writepage,
 	.sync_page		= block_sync_page,
 	.write_begin		= ext4_write_begin,
 	.write_end		= ext4_journalled_write_end,
@@ -3536,7 +3407,7 @@ static const struct address_space_operations ext4_journalled_aops = {
 static const struct address_space_operations ext4_da_aops = {
 	.readpage		= ext4_readpage,
 	.readpages		= ext4_readpages,
-	.writepage		= ext4_da_writepage,
+	.writepage		= ext4_writepage,
 	.writepages		= ext4_da_writepages,
 	.sync_page		= block_sync_page,
 	.write_begin		= ext4_da_write_begin,
@@ -3583,7 +3454,8 @@ int ext4_block_truncate_page(handle_t *handle,
 	struct page *page;
 	int err = 0;
 
-	page = grab_cache_page(mapping, from >> PAGE_CACHE_SHIFT);
+	page = find_or_create_page(mapping, from >> PAGE_CACHE_SHIFT,
+				   mapping_gfp_mask(mapping) & ~__GFP_FS);
 	if (!page)
 		return -EINVAL;
 
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index bb415408fdb..7050a9cd04a 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -12,7 +12,6 @@
 #include <linux/capability.h>
 #include <linux/time.h>
 #include <linux/compat.h>
-#include <linux/smp_lock.h>
 #include <linux/mount.h>
 #include <linux/file.h>
 #include <asm/uaccess.h>
@@ -192,7 +191,7 @@ setversion_out:
 	case EXT4_IOC_GROUP_EXTEND: {
 		ext4_fsblk_t n_blocks_count;
 		struct super_block *sb = inode->i_sb;
-		int err, err2;
+		int err, err2=0;
 
 		if (!capable(CAP_SYS_RESOURCE))
 			return -EPERM;
@@ -205,9 +204,11 @@ setversion_out:
 			return err;
 
 		err = ext4_group_extend(sb, EXT4_SB(sb)->s_es, n_blocks_count);
-		jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
-		err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
-		jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+		if (EXT4_SB(sb)->s_journal) {
+			jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
+			err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
+			jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+		}
 		if (err == 0)
 			err = err2;
 		mnt_drop_write(filp->f_path.mnt);
@@ -252,7 +253,7 @@ setversion_out:
 	case EXT4_IOC_GROUP_ADD: {
 		struct ext4_new_group_data input;
 		struct super_block *sb = inode->i_sb;
-		int err, err2;
+		int err, err2=0;
 
 		if (!capable(CAP_SYS_RESOURCE))
 			return -EPERM;
@@ -266,9 +267,11 @@ setversion_out:
 			return err;
 
 		err = ext4_group_add(sb, &input);
-		jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
-		err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
-		jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+		if (EXT4_SB(sb)->s_journal) {
+			jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
+			err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
+			jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+		}
 		if (err == 0)
 			err = err2;
 		mnt_drop_write(filp->f_path.mnt);
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 519a0a686d9..cd258463e2a 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -657,7 +657,8 @@ static void ext4_mb_mark_free_simple(struct super_block *sb,
 	}
 }
 
-static void ext4_mb_generate_buddy(struct super_block *sb,
+static noinline_for_stack
+void ext4_mb_generate_buddy(struct super_block *sb,
 				void *buddy, void *bitmap, ext4_group_t group)
 {
 	struct ext4_group_info *grp = ext4_get_group_info(sb, group);
@@ -1480,7 +1481,8 @@ static void ext4_mb_measure_extent(struct ext4_allocation_context *ac,
 	ext4_mb_check_limits(ac, e4b, 0);
 }
 
-static int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
+static noinline_for_stack
+int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
 					struct ext4_buddy *e4b)
 {
 	struct ext4_free_extent ex = ac->ac_b_ex;
@@ -1507,7 +1509,8 @@ static int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
 	return 0;
 }
 
-static int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
+static noinline_for_stack
+int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
 				struct ext4_buddy *e4b)
 {
 	ext4_group_t group = ac->ac_g_ex.fe_group;
@@ -1566,7 +1569,8 @@ static int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
  * The routine scans buddy structures (not bitmap!) from given order
  * to max order and tries to find big enough chunk to satisfy the req
  */
-static void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac,
+static noinline_for_stack
+void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac,
 					struct ext4_buddy *e4b)
 {
 	struct super_block *sb = ac->ac_sb;
@@ -1609,7 +1613,8 @@ static void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac,
  * In order to optimize scanning, caller must pass number of
  * free blocks in the group, so the routine can know upper limit.
  */
-static void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
+static noinline_for_stack
+void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
 					struct ext4_buddy *e4b)
 {
 	struct super_block *sb = ac->ac_sb;
@@ -1668,7 +1673,8 @@ static void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
  * we try to find stripe-aligned chunks for stripe-size requests
  * XXX should do so at least for multiples of stripe size as well
  */
-static void ext4_mb_scan_aligned(struct ext4_allocation_context *ac,
+static noinline_for_stack
+void ext4_mb_scan_aligned(struct ext4_allocation_context *ac,
 				 struct ext4_buddy *e4b)
 {
 	struct super_block *sb = ac->ac_sb;
@@ -1831,7 +1837,8 @@ void ext4_mb_put_buddy_cache_lock(struct super_block *sb,
 
 }
 
-static int ext4_mb_init_group(struct super_block *sb, ext4_group_t group)
+static noinline_for_stack
+int ext4_mb_init_group(struct super_block *sb, ext4_group_t group)
 {
 
 	int ret;
@@ -2902,7 +2909,11 @@ int __init init_ext4_mballoc(void)
 
 void exit_ext4_mballoc(void)
 {
-	/* XXX: synchronize_rcu(); */
+	/* 
+	 * Wait for completion of call_rcu()'s on ext4_pspace_cachep
+	 * before destroying the slab cache.
+	 */
+	rcu_barrier();
 	kmem_cache_destroy(ext4_pspace_cachep);
 	kmem_cache_destroy(ext4_ac_cachep);
 	kmem_cache_destroy(ext4_free_ext_cachep);
@@ -3457,7 +3468,8 @@ static void ext4_mb_generate_from_freelist(struct super_block *sb, void *bitmap,
  * used in in-core bitmap. buddy must be generated from this bitmap
  * Need to be called with ext4 group lock held
  */
-static void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap,
+static noinline_for_stack
+void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap,
 					ext4_group_t group)
 {
 	struct ext4_group_info *grp = ext4_get_group_info(sb, group);
@@ -4215,14 +4227,9 @@ ext4_mb_initialize_context(struct ext4_allocation_context *ac,
 	ext4_get_group_no_and_offset(sb, goal, &group, &block);
 
 	/* set up allocation goals */
+	memset(ac, 0, sizeof(struct ext4_allocation_context));
 	ac->ac_b_ex.fe_logical = ar->logical;
-	ac->ac_b_ex.fe_group = 0;
-	ac->ac_b_ex.fe_start = 0;
-	ac->ac_b_ex.fe_len = 0;
 	ac->ac_status = AC_STATUS_CONTINUE;
-	ac->ac_groups_scanned = 0;
-	ac->ac_ex_scanned = 0;
-	ac->ac_found = 0;
 	ac->ac_sb = sb;
 	ac->ac_inode = ar->inode;
 	ac->ac_o_ex.fe_logical = ar->logical;
@@ -4233,15 +4240,7 @@ ext4_mb_initialize_context(struct ext4_allocation_context *ac,
 	ac->ac_g_ex.fe_group = group;
 	ac->ac_g_ex.fe_start = block;
 	ac->ac_g_ex.fe_len = len;
-	ac->ac_f_ex.fe_len = 0;
 	ac->ac_flags = ar->flags;
-	ac->ac_2order = 0;
-	ac->ac_criteria = 0;
-	ac->ac_pa = NULL;
-	ac->ac_bitmap_page = NULL;
-	ac->ac_buddy_page = NULL;
-	ac->alloc_semp = NULL;
-	ac->ac_lg = NULL;
 
 	/* we have to define context: we'll we work with a file or
 	 * locality group. this is a policy, actually */
@@ -4509,10 +4508,7 @@ ext4_fsblk_t ext4_mb_new_blocks(handle_t *handle,
 	}
 
 	ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
-	if (ac) {
-		ac->ac_sb = sb;
-		ac->ac_inode = ar->inode;
-	} else {
+	if (!ac) {
 		ar->len = 0;
 		*errp = -ENOMEM;
 		goto out1;
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 38ff75a0fe2..530b4ca0151 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -16,7 +16,6 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/time.h>
-#include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/compat.h>
 #include <asm/uaccess.h>
diff --git a/fs/fat/file.c b/fs/fat/file.c
index b28ea646ff6..f042b965c95 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -134,7 +134,7 @@ static int fat_file_release(struct inode *inode, struct file *filp)
 	if ((filp->f_mode & FMODE_WRITE) &&
 	     MSDOS_SB(inode->i_sb)->options.flush) {
 		fat_flush_inodes(inode->i_sb, inode, NULL);
-		congestion_wait(WRITE, HZ/10);
+		congestion_wait(BLK_RW_ASYNC, HZ/10);
 	}
 	return 0;
 }
diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c
index 82f88733b68..bbc94ae4fd7 100644
--- a/fs/fat/namei_msdos.c
+++ b/fs/fat/namei_msdos.c
@@ -9,7 +9,6 @@
 #include <linux/module.h>
 #include <linux/time.h>
 #include <linux/buffer_head.h>
-#include <linux/smp_lock.h>
 #include "fat.h"
 
 /* Characters that are undesirable in an MS-DOS file name */
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index 73471b7ecc8..cb6e8355711 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -19,7 +19,6 @@
 #include <linux/jiffies.h>
 #include <linux/ctype.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/namei.h>
 #include "fat.h"
diff --git a/fs/fcntl.c b/fs/fcntl.c
index a040b764f8e..ae413086db9 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -19,7 +19,6 @@
 #include <linux/signal.h>
 #include <linux/rcupdate.h>
 #include <linux/pid_namespace.h>
-#include <linux/smp_lock.h>
 
 #include <asm/poll.h>
 #include <asm/siginfo.h>
diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c
index cdbd1654e4c..1e8af939b3e 100644
--- a/fs/freevxfs/vxfs_super.c
+++ b/fs/freevxfs/vxfs_super.c
@@ -38,6 +38,7 @@
 #include <linux/buffer_head.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/stat.h>
 #include <linux/vfs.h>
 #include <linux/mount.h>
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 8fed2ed12f3..6484eb75acd 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -286,8 +286,8 @@ __releases(&fc->lock)
 		}
 		if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
 		    fc->connected && fc->bdi_initialized) {
-			clear_bdi_congested(&fc->bdi, READ);
-			clear_bdi_congested(&fc->bdi, WRITE);
+			clear_bdi_congested(&fc->bdi, BLK_RW_SYNC);
+			clear_bdi_congested(&fc->bdi, BLK_RW_ASYNC);
 		}
 		fc->num_background--;
 		fc->active_background--;
@@ -414,8 +414,8 @@ static void fuse_request_send_nowait_locked(struct fuse_conn *fc,
 		fc->blocked = 1;
 	if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
 	    fc->bdi_initialized) {
-		set_bdi_congested(&fc->bdi, READ);
-		set_bdi_congested(&fc->bdi, WRITE);
+		set_bdi_congested(&fc->bdi, BLK_RW_SYNC);
+		set_bdi_congested(&fc->bdi, BLK_RW_ASYNC);
 	}
 	list_add_tail(&req->list, &fc->bg_queue);
 	flush_bg_queue(fc);
@@ -849,6 +849,81 @@ err:
 	return err;
 }
 
+static int fuse_notify_inval_inode(struct fuse_conn *fc, unsigned int size,
+				   struct fuse_copy_state *cs)
+{
+	struct fuse_notify_inval_inode_out outarg;
+	int err = -EINVAL;
+
+	if (size != sizeof(outarg))
+		goto err;
+
+	err = fuse_copy_one(cs, &outarg, sizeof(outarg));
+	if (err)
+		goto err;
+	fuse_copy_finish(cs);
+
+	down_read(&fc->killsb);
+	err = -ENOENT;
+	if (!fc->sb)
+		goto err_unlock;
+
+	err = fuse_reverse_inval_inode(fc->sb, outarg.ino,
+				       outarg.off, outarg.len);
+
+err_unlock:
+	up_read(&fc->killsb);
+	return err;
+
+err:
+	fuse_copy_finish(cs);
+	return err;
+}
+
+static int fuse_notify_inval_entry(struct fuse_conn *fc, unsigned int size,
+				   struct fuse_copy_state *cs)
+{
+	struct fuse_notify_inval_entry_out outarg;
+	int err = -EINVAL;
+	char buf[FUSE_NAME_MAX+1];
+	struct qstr name;
+
+	if (size < sizeof(outarg))
+		goto err;
+
+	err = fuse_copy_one(cs, &outarg, sizeof(outarg));
+	if (err)
+		goto err;
+
+	err = -ENAMETOOLONG;
+	if (outarg.namelen > FUSE_NAME_MAX)
+		goto err;
+
+	name.name = buf;
+	name.len = outarg.namelen;
+	err = fuse_copy_one(cs, buf, outarg.namelen + 1);
+	if (err)
+		goto err;
+	fuse_copy_finish(cs);
+	buf[outarg.namelen] = 0;
+	name.hash = full_name_hash(name.name, name.len);
+
+	down_read(&fc->killsb);
+	err = -ENOENT;
+	if (!fc->sb)
+		goto err_unlock;
+
+	err = fuse_reverse_inval_entry(fc->sb, outarg.parent, &name);
+
+err_unlock:
+	up_read(&fc->killsb);
+	return err;
+
+err:
+	fuse_copy_finish(cs);
+	return err;
+}
+
 static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code,
 		       unsigned int size, struct fuse_copy_state *cs)
 {
@@ -856,6 +931,12 @@ static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code,
 	case FUSE_NOTIFY_POLL:
 		return fuse_notify_poll(fc, size, cs);
 
+	case FUSE_NOTIFY_INVAL_INODE:
+		return fuse_notify_inval_inode(fc, size, cs);
+
+	case FUSE_NOTIFY_INVAL_ENTRY:
+		return fuse_notify_inval_entry(fc, size, cs);
+
 	default:
 		fuse_copy_finish(cs);
 		return -EINVAL;
@@ -910,7 +991,7 @@ static ssize_t fuse_dev_write(struct kiocb *iocb, const struct iovec *iov,
 			       unsigned long nr_segs, loff_t pos)
 {
 	int err;
-	unsigned nbytes = iov_length(iov, nr_segs);
+	size_t nbytes = iov_length(iov, nr_segs);
 	struct fuse_req *req;
 	struct fuse_out_header oh;
 	struct fuse_copy_state cs;
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index b3089a083d3..e703654e7f4 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -375,7 +375,7 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, int mode,
 	struct fuse_conn *fc = get_fuse_conn(dir);
 	struct fuse_req *req;
 	struct fuse_req *forget_req;
-	struct fuse_open_in inarg;
+	struct fuse_create_in inarg;
 	struct fuse_open_out outopen;
 	struct fuse_entry_out outentry;
 	struct fuse_file *ff;
@@ -399,15 +399,20 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, int mode,
 	if (!ff)
 		goto out_put_request;
 
+	if (!fc->dont_mask)
+		mode &= ~current_umask();
+
 	flags &= ~O_NOCTTY;
 	memset(&inarg, 0, sizeof(inarg));
 	memset(&outentry, 0, sizeof(outentry));
 	inarg.flags = flags;
 	inarg.mode = mode;
+	inarg.umask = current_umask();
 	req->in.h.opcode = FUSE_CREATE;
 	req->in.h.nodeid = get_node_id(dir);
 	req->in.numargs = 2;
-	req->in.args[0].size = sizeof(inarg);
+	req->in.args[0].size = fc->minor < 12 ? sizeof(struct fuse_open_in) :
+						sizeof(inarg);
 	req->in.args[0].value = &inarg;
 	req->in.args[1].size = entry->d_name.len + 1;
 	req->in.args[1].value = entry->d_name.name;
@@ -546,12 +551,17 @@ static int fuse_mknod(struct inode *dir, struct dentry *entry, int mode,
 	if (IS_ERR(req))
 		return PTR_ERR(req);
 
+	if (!fc->dont_mask)
+		mode &= ~current_umask();
+
 	memset(&inarg, 0, sizeof(inarg));
 	inarg.mode = mode;
 	inarg.rdev = new_encode_dev(rdev);
+	inarg.umask = current_umask();
 	req->in.h.opcode = FUSE_MKNOD;
 	req->in.numargs = 2;
-	req->in.args[0].size = sizeof(inarg);
+	req->in.args[0].size = fc->minor < 12 ? FUSE_COMPAT_MKNOD_IN_SIZE :
+						sizeof(inarg);
 	req->in.args[0].value = &inarg;
 	req->in.args[1].size = entry->d_name.len + 1;
 	req->in.args[1].value = entry->d_name.name;
@@ -578,8 +588,12 @@ static int fuse_mkdir(struct inode *dir, struct dentry *entry, int mode)
 	if (IS_ERR(req))
 		return PTR_ERR(req);
 
+	if (!fc->dont_mask)
+		mode &= ~current_umask();
+
 	memset(&inarg, 0, sizeof(inarg));
 	inarg.mode = mode;
+	inarg.umask = current_umask();
 	req->in.h.opcode = FUSE_MKDIR;
 	req->in.numargs = 2;
 	req->in.args[0].size = sizeof(inarg);
@@ -845,6 +859,43 @@ int fuse_update_attributes(struct inode *inode, struct kstat *stat,
 	return err;
 }
 
+int fuse_reverse_inval_entry(struct super_block *sb, u64 parent_nodeid,
+			     struct qstr *name)
+{
+	int err = -ENOTDIR;
+	struct inode *parent;
+	struct dentry *dir;
+	struct dentry *entry;
+
+	parent = ilookup5(sb, parent_nodeid, fuse_inode_eq, &parent_nodeid);
+	if (!parent)
+		return -ENOENT;
+
+	mutex_lock(&parent->i_mutex);
+	if (!S_ISDIR(parent->i_mode))
+		goto unlock;
+
+	err = -ENOENT;
+	dir = d_find_alias(parent);
+	if (!dir)
+		goto unlock;
+
+	entry = d_lookup(dir, name);
+	dput(dir);
+	if (!entry)
+		goto unlock;
+
+	fuse_invalidate_attr(parent);
+	fuse_invalidate_entry(entry);
+	dput(entry);
+	err = 0;
+
+ unlock:
+	mutex_unlock(&parent->i_mutex);
+	iput(parent);
+	return err;
+}
+
 /*
  * Calling into a user-controlled filesystem gives the filesystem
  * daemon ptrace-like capabilities over the requester process.  This
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index fce6ce694fd..cbc464043b6 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1922,7 +1922,7 @@ unsigned fuse_file_poll(struct file *file, poll_table *wait)
 
 	req = fuse_get_req(fc);
 	if (IS_ERR(req))
-		return PTR_ERR(req);
+		return POLLERR;
 
 	req->in.h.opcode = FUSE_POLL;
 	req->in.h.nodeid = ff->nodeid;
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index aaf2f9ff970..52b641fc0fa 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -446,6 +446,9 @@ struct fuse_conn {
 	/** Do multi-page cached writes */
 	unsigned big_writes:1;
 
+	/** Don't apply umask to creation modes */
+	unsigned dont_mask:1;
+
 	/** The number of requests waiting for completion */
 	atomic_t num_waiting;
 
@@ -481,6 +484,12 @@ struct fuse_conn {
 
 	/** Called on final put */
 	void (*release)(struct fuse_conn *);
+
+	/** Super block for this connection. */
+	struct super_block *sb;
+
+	/** Read/write semaphore to hold when accessing sb. */
+	struct rw_semaphore killsb;
 };
 
 static inline struct fuse_conn *get_fuse_conn_super(struct super_block *sb)
@@ -509,6 +518,11 @@ extern const struct file_operations fuse_dev_operations;
 extern const struct dentry_operations fuse_dentry_operations;
 
 /**
+ * Inode to nodeid comparison.
+ */
+int fuse_inode_eq(struct inode *inode, void *_nodeidp);
+
+/**
  * Get a filled in inode
  */
 struct inode *fuse_iget(struct super_block *sb, u64 nodeid,
@@ -708,6 +722,19 @@ void fuse_release_nowrite(struct inode *inode);
 
 u64 fuse_get_attr_version(struct fuse_conn *fc);
 
+/**
+ * File-system tells the kernel to invalidate cache for the given node id.
+ */
+int fuse_reverse_inval_inode(struct super_block *sb, u64 nodeid,
+			     loff_t offset, loff_t len);
+
+/**
+ * File-system tells the kernel to invalidate parent attributes and
+ * the dentry matching parent/name.
+ */
+int fuse_reverse_inval_entry(struct super_block *sb, u64 parent_nodeid,
+			     struct qstr *name);
+
 int fuse_do_open(struct fuse_conn *fc, u64 nodeid, struct file *file,
 		 bool isdir);
 ssize_t fuse_direct_io(struct file *file, const char __user *buf,
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index d8673ccf90b..f91ccc4a189 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -206,7 +206,7 @@ static void fuse_init_inode(struct inode *inode, struct fuse_attr *attr)
 		BUG();
 }
 
-static int fuse_inode_eq(struct inode *inode, void *_nodeidp)
+int fuse_inode_eq(struct inode *inode, void *_nodeidp)
 {
 	u64 nodeid = *(u64 *) _nodeidp;
 	if (get_node_id(inode) == nodeid)
@@ -257,6 +257,31 @@ struct inode *fuse_iget(struct super_block *sb, u64 nodeid,
 	return inode;
 }
 
+int fuse_reverse_inval_inode(struct super_block *sb, u64 nodeid,
+			     loff_t offset, loff_t len)
+{
+	struct inode *inode;
+	pgoff_t pg_start;
+	pgoff_t pg_end;
+
+	inode = ilookup5(sb, nodeid, fuse_inode_eq, &nodeid);
+	if (!inode)
+		return -ENOENT;
+
+	fuse_invalidate_attr(inode);
+	if (offset >= 0) {
+		pg_start = offset >> PAGE_CACHE_SHIFT;
+		if (len <= 0)
+			pg_end = -1;
+		else
+			pg_end = (offset + len - 1) >> PAGE_CACHE_SHIFT;
+		invalidate_inode_pages2_range(inode->i_mapping,
+					      pg_start, pg_end);
+	}
+	iput(inode);
+	return 0;
+}
+
 static void fuse_umount_begin(struct super_block *sb)
 {
 	fuse_abort_conn(get_fuse_conn_super(sb));
@@ -480,6 +505,7 @@ void fuse_conn_init(struct fuse_conn *fc)
 	memset(fc, 0, sizeof(*fc));
 	spin_lock_init(&fc->lock);
 	mutex_init(&fc->inst_mutex);
+	init_rwsem(&fc->killsb);
 	atomic_set(&fc->count, 1);
 	init_waitqueue_head(&fc->waitq);
 	init_waitqueue_head(&fc->blocked_waitq);
@@ -725,6 +751,8 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req)
 			}
 			if (arg->flags & FUSE_BIG_WRITES)
 				fc->big_writes = 1;
+			if (arg->flags & FUSE_DONT_MASK)
+				fc->dont_mask = 1;
 		} else {
 			ra_pages = fc->max_read / PAGE_CACHE_SIZE;
 			fc->no_lock = 1;
@@ -748,7 +776,7 @@ static void fuse_send_init(struct fuse_conn *fc, struct fuse_req *req)
 	arg->minor = FUSE_KERNEL_MINOR_VERSION;
 	arg->max_readahead = fc->bdi.ra_pages * PAGE_CACHE_SIZE;
 	arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC |
-		FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES;
+		FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES | FUSE_DONT_MASK;
 	req->in.h.opcode = FUSE_INIT;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(*arg);
@@ -860,10 +888,16 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
 	fuse_conn_init(fc);
 
 	fc->dev = sb->s_dev;
+	fc->sb = sb;
 	err = fuse_bdi_init(fc, sb);
 	if (err)
 		goto err_put_conn;
 
+	/* Handle umasking inside the fuse code */
+	if (sb->s_flags & MS_POSIXACL)
+		fc->dont_mask = 1;
+	sb->s_flags |= MS_POSIXACL;
+
 	fc->release = fuse_free_conn;
 	fc->flags = d.flags;
 	fc->user_id = d.user_id;
@@ -941,12 +975,25 @@ static int fuse_get_sb(struct file_system_type *fs_type,
 	return get_sb_nodev(fs_type, flags, raw_data, fuse_fill_super, mnt);
 }
 
+static void fuse_kill_sb_anon(struct super_block *sb)
+{
+	struct fuse_conn *fc = get_fuse_conn_super(sb);
+
+	if (fc) {
+		down_write(&fc->killsb);
+		fc->sb = NULL;
+		up_write(&fc->killsb);
+	}
+
+	kill_anon_super(sb);
+}
+
 static struct file_system_type fuse_fs_type = {
 	.owner		= THIS_MODULE,
 	.name		= "fuse",
 	.fs_flags	= FS_HAS_SUBTYPE,
 	.get_sb		= fuse_get_sb,
-	.kill_sb	= kill_anon_super,
+	.kill_sb	= fuse_kill_sb_anon,
 };
 
 #ifdef CONFIG_BLOCK
@@ -958,11 +1005,24 @@ static int fuse_get_sb_blk(struct file_system_type *fs_type,
 			   mnt);
 }
 
+static void fuse_kill_sb_blk(struct super_block *sb)
+{
+	struct fuse_conn *fc = get_fuse_conn_super(sb);
+
+	if (fc) {
+		down_write(&fc->killsb);
+		fc->sb = NULL;
+		up_write(&fc->killsb);
+	}
+
+	kill_block_super(sb);
+}
+
 static struct file_system_type fuseblk_fs_type = {
 	.owner		= THIS_MODULE,
 	.name		= "fuseblk",
 	.get_sb		= fuse_get_sb_blk,
-	.kill_sb	= kill_block_super,
+	.kill_sb	= fuse_kill_sb_blk,
 	.fs_flags	= FS_REQUIRES_DEV | FS_HAS_SUBTYPE,
 };
 
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index 03ebb439ace..7ebae9a4ecc 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -624,6 +624,7 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping,
 {
 	struct gfs2_inode *ip = GFS2_I(mapping->host);
 	struct gfs2_sbd *sdp = GFS2_SB(mapping->host);
+	struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
 	unsigned int data_blocks = 0, ind_blocks = 0, rblocks;
 	int alloc_required;
 	int error = 0;
@@ -637,6 +638,14 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping,
 	error = gfs2_glock_nq(&ip->i_gh);
 	if (unlikely(error))
 		goto out_uninit;
+	if (&ip->i_inode == sdp->sd_rindex) {
+		error = gfs2_glock_nq_init(m_ip->i_gl, LM_ST_EXCLUSIVE,
+					   GL_NOCACHE, &m_ip->i_gh);
+		if (unlikely(error)) {
+			gfs2_glock_dq(&ip->i_gh);
+			goto out_uninit;
+		}
+	}
 
 	error = gfs2_write_alloc_required(ip, pos, len, &alloc_required);
 	if (error)
@@ -667,6 +676,8 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping,
 		rblocks += data_blocks ? data_blocks : 1;
 	if (ind_blocks || data_blocks)
 		rblocks += RES_STATFS + RES_QUOTA;
+	if (&ip->i_inode == sdp->sd_rindex)
+		rblocks += 2 * RES_STATFS;
 
 	error = gfs2_trans_begin(sdp, rblocks,
 				 PAGE_CACHE_SIZE/sdp->sd_sb.sb_bsize);
@@ -712,6 +723,10 @@ out_alloc_put:
 		gfs2_alloc_put(ip);
 	}
 out_unlock:
+	if (&ip->i_inode == sdp->sd_rindex) {
+		gfs2_glock_dq(&m_ip->i_gh);
+		gfs2_holder_uninit(&m_ip->i_gh);
+	}
 	gfs2_glock_dq(&ip->i_gh);
 out_uninit:
 	gfs2_holder_uninit(&ip->i_gh);
@@ -725,14 +740,21 @@ out_uninit:
 static void adjust_fs_space(struct inode *inode)
 {
 	struct gfs2_sbd *sdp = inode->i_sb->s_fs_info;
+	struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
+	struct gfs2_inode *l_ip = GFS2_I(sdp->sd_sc_inode);
 	struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
 	struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local;
+	struct buffer_head *m_bh, *l_bh;
 	u64 fs_total, new_free;
 
 	/* Total up the file system space, according to the latest rindex. */
 	fs_total = gfs2_ri_total(sdp);
+	if (gfs2_meta_inode_buffer(m_ip, &m_bh) != 0)
+		return;
 
 	spin_lock(&sdp->sd_statfs_spin);
+	gfs2_statfs_change_in(m_sc, m_bh->b_data +
+			      sizeof(struct gfs2_dinode));
 	if (fs_total > (m_sc->sc_total + l_sc->sc_total))
 		new_free = fs_total - (m_sc->sc_total + l_sc->sc_total);
 	else
@@ -741,6 +763,13 @@ static void adjust_fs_space(struct inode *inode)
 	fs_warn(sdp, "File system extended by %llu blocks.\n",
 		(unsigned long long)new_free);
 	gfs2_statfs_change(sdp, new_free, new_free, 0);
+
+	if (gfs2_meta_inode_buffer(l_ip, &l_bh) != 0)
+		goto out;
+	update_statfs(sdp, m_bh, l_bh);
+	brelse(l_bh);
+out:
+	brelse(m_bh);
 }
 
 /**
@@ -763,6 +792,7 @@ static int gfs2_stuffed_write_end(struct inode *inode, struct buffer_head *dibh,
 {
 	struct gfs2_inode *ip = GFS2_I(inode);
 	struct gfs2_sbd *sdp = GFS2_SB(inode);
+	struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
 	u64 to = pos + copied;
 	void *kaddr;
 	unsigned char *buf = dibh->b_data + sizeof(struct gfs2_dinode);
@@ -794,6 +824,10 @@ static int gfs2_stuffed_write_end(struct inode *inode, struct buffer_head *dibh,
 
 	brelse(dibh);
 	gfs2_trans_end(sdp);
+	if (inode == sdp->sd_rindex) {
+		gfs2_glock_dq(&m_ip->i_gh);
+		gfs2_holder_uninit(&m_ip->i_gh);
+	}
 	gfs2_glock_dq(&ip->i_gh);
 	gfs2_holder_uninit(&ip->i_gh);
 	return copied;
@@ -823,6 +857,7 @@ static int gfs2_write_end(struct file *file, struct address_space *mapping,
 	struct inode *inode = page->mapping->host;
 	struct gfs2_inode *ip = GFS2_I(inode);
 	struct gfs2_sbd *sdp = GFS2_SB(inode);
+	struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
 	struct buffer_head *dibh;
 	struct gfs2_alloc *al = ip->i_alloc;
 	unsigned int from = pos & (PAGE_CACHE_SIZE - 1);
@@ -865,6 +900,10 @@ failed:
 		gfs2_quota_unlock(ip);
 		gfs2_alloc_put(ip);
 	}
+	if (inode == sdp->sd_rindex) {
+		gfs2_glock_dq(&m_ip->i_gh);
+		gfs2_holder_uninit(&m_ip->i_gh);
+	}
 	gfs2_glock_dq(&ip->i_gh);
 	gfs2_holder_uninit(&ip->i_gh);
 	return ret;
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 297421c0427..8b674b1f3a5 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -63,6 +63,7 @@ static void do_xmote(struct gfs2_glock *gl, struct gfs2_holder *gh, unsigned int
 static DECLARE_RWSEM(gfs2_umount_flush_sem);
 static struct dentry *gfs2_root;
 static struct workqueue_struct *glock_workqueue;
+struct workqueue_struct *gfs2_delete_workqueue;
 static LIST_HEAD(lru_list);
 static atomic_t lru_count = ATOMIC_INIT(0);
 static DEFINE_SPINLOCK(lru_lock);
@@ -167,13 +168,33 @@ static void glock_free(struct gfs2_glock *gl)
  *
  */
 
-static void gfs2_glock_hold(struct gfs2_glock *gl)
+void gfs2_glock_hold(struct gfs2_glock *gl)
 {
 	GLOCK_BUG_ON(gl, atomic_read(&gl->gl_ref) == 0);
 	atomic_inc(&gl->gl_ref);
 }
 
 /**
+ * demote_ok - Check to see if it's ok to unlock a glock
+ * @gl: the glock
+ *
+ * Returns: 1 if it's ok
+ */
+
+static int demote_ok(const struct gfs2_glock *gl)
+{
+	const struct gfs2_glock_operations *glops = gl->gl_ops;
+
+	if (gl->gl_state == LM_ST_UNLOCKED)
+		return 0;
+	if (!list_empty(&gl->gl_holders))
+		return 0;
+	if (glops->go_demote_ok)
+		return glops->go_demote_ok(gl);
+	return 1;
+}
+
+/**
  * gfs2_glock_schedule_for_reclaim - Add a glock to the reclaim list
  * @gl: the glock
  *
@@ -181,8 +202,13 @@ static void gfs2_glock_hold(struct gfs2_glock *gl)
 
 static void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl)
 {
+	int may_reclaim;
+	may_reclaim = (demote_ok(gl) &&
+		       (atomic_read(&gl->gl_ref) == 1 ||
+			(gl->gl_name.ln_type == LM_TYPE_INODE &&
+			 atomic_read(&gl->gl_ref) <= 2)));
 	spin_lock(&lru_lock);
-	if (list_empty(&gl->gl_lru) && gl->gl_state != LM_ST_UNLOCKED) {
+	if (list_empty(&gl->gl_lru) && may_reclaim) {
 		list_add_tail(&gl->gl_lru, &lru_list);
 		atomic_inc(&lru_count);
 	}
@@ -190,6 +216,21 @@ static void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl)
 }
 
 /**
+ * gfs2_glock_put_nolock() - Decrement reference count on glock
+ * @gl: The glock to put
+ *
+ * This function should only be used if the caller has its own reference
+ * to the glock, in addition to the one it is dropping.
+ */
+
+void gfs2_glock_put_nolock(struct gfs2_glock *gl)
+{
+	if (atomic_dec_and_test(&gl->gl_ref))
+		GLOCK_BUG_ON(gl, 1);
+	gfs2_glock_schedule_for_reclaim(gl);
+}
+
+/**
  * gfs2_glock_put() - Decrement reference count on glock
  * @gl: The glock to put
  *
@@ -214,9 +255,9 @@ int gfs2_glock_put(struct gfs2_glock *gl)
 		rv = 1;
 		goto out;
 	}
-	/* 1 for being hashed, 1 for having state != LM_ST_UNLOCKED */
-	if (atomic_read(&gl->gl_ref) == 2)
-		gfs2_glock_schedule_for_reclaim(gl);
+	spin_lock(&gl->gl_spin);
+	gfs2_glock_schedule_for_reclaim(gl);
+	spin_unlock(&gl->gl_spin);
 	write_unlock(gl_lock_addr(gl->gl_hash));
 out:
 	return rv;
@@ -398,7 +439,7 @@ static void state_change(struct gfs2_glock *gl, unsigned int new_state)
 		if (held2)
 			gfs2_glock_hold(gl);
 		else
-			gfs2_glock_put(gl);
+			gfs2_glock_put_nolock(gl);
 	}
 
 	gl->gl_state = new_state;
@@ -633,12 +674,35 @@ out:
 out_sched:
 	gfs2_glock_hold(gl);
 	if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
-		gfs2_glock_put(gl);
+		gfs2_glock_put_nolock(gl);
 out_unlock:
 	clear_bit(GLF_LOCK, &gl->gl_flags);
 	goto out;
 }
 
+static void delete_work_func(struct work_struct *work)
+{
+	struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_delete);
+	struct gfs2_sbd *sdp = gl->gl_sbd;
+	struct gfs2_inode *ip = NULL;
+	struct inode *inode;
+	u64 no_addr = 0;
+
+	spin_lock(&gl->gl_spin);
+	ip = (struct gfs2_inode *)gl->gl_object;
+	if (ip)
+		no_addr = ip->i_no_addr;
+	spin_unlock(&gl->gl_spin);
+	if (ip) {
+		inode = gfs2_ilookup(sdp->sd_vfs, no_addr);
+		if (inode) {
+			d_prune_aliases(inode);
+			iput(inode);
+		}
+	}
+	gfs2_glock_put(gl);
+}
+
 static void glock_work_func(struct work_struct *work)
 {
 	unsigned long delay = 0;
@@ -717,6 +781,7 @@ int gfs2_glock_get(struct gfs2_sbd *sdp, u64 number,
 	gl->gl_sbd = sdp;
 	gl->gl_aspace = NULL;
 	INIT_DELAYED_WORK(&gl->gl_work, glock_work_func);
+	INIT_WORK(&gl->gl_delete, delete_work_func);
 
 	/* If this glock protects actual on-disk data or metadata blocks,
 	   create a VFS inode to manage the pages/buffers holding them. */
@@ -858,6 +923,8 @@ static void handle_callback(struct gfs2_glock *gl, unsigned int state,
 			gl->gl_demote_state != state) {
 		gl->gl_demote_state = LM_ST_UNLOCKED;
 	}
+	if (gl->gl_ops->go_callback)
+		gl->gl_ops->go_callback(gl);
 	trace_gfs2_demote_rq(gl);
 }
 
@@ -1274,33 +1341,12 @@ void gfs2_glock_complete(struct gfs2_glock *gl, int ret)
 		gfs2_glock_put(gl);
 }
 
-/**
- * demote_ok - Check to see if it's ok to unlock a glock
- * @gl: the glock
- *
- * Returns: 1 if it's ok
- */
-
-static int demote_ok(const struct gfs2_glock *gl)
-{
-	const struct gfs2_glock_operations *glops = gl->gl_ops;
-
-	if (gl->gl_state == LM_ST_UNLOCKED)
-		return 0;
-	if (!list_empty(&gl->gl_holders))
-		return 0;
-	if (glops->go_demote_ok)
-		return glops->go_demote_ok(gl);
-	return 1;
-}
-
 
 static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
 {
 	struct gfs2_glock *gl;
 	int may_demote;
 	int nr_skipped = 0;
-	int got_ref = 0;
 	LIST_HEAD(skipped);
 
 	if (nr == 0)
@@ -1315,37 +1361,29 @@ static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
 		list_del_init(&gl->gl_lru);
 		atomic_dec(&lru_count);
 
+		/* Check if glock is about to be freed */
+		if (atomic_read(&gl->gl_ref) == 0)
+			continue;
+
 		/* Test for being demotable */
 		if (!test_and_set_bit(GLF_LOCK, &gl->gl_flags)) {
 			gfs2_glock_hold(gl);
-			got_ref = 1;
 			spin_unlock(&lru_lock);
 			spin_lock(&gl->gl_spin);
 			may_demote = demote_ok(gl);
-			spin_unlock(&gl->gl_spin);
-			clear_bit(GLF_LOCK, &gl->gl_flags);
 			if (may_demote) {
 				handle_callback(gl, LM_ST_UNLOCKED, 0);
 				nr--;
-				if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
-					gfs2_glock_put(gl);
-				got_ref = 0;
 			}
+			if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
+				gfs2_glock_put_nolock(gl);
+			spin_unlock(&gl->gl_spin);
+			clear_bit(GLF_LOCK, &gl->gl_flags);
 			spin_lock(&lru_lock);
-			if (may_demote)
-				continue;
-		}
-		if (list_empty(&gl->gl_lru) &&
-		    (atomic_read(&gl->gl_ref) <= (2 + got_ref))) {
-			nr_skipped++;
-			list_add(&gl->gl_lru, &skipped);
-		}
-		if (got_ref) {
-			spin_unlock(&lru_lock);
-			gfs2_glock_put(gl);
-			spin_lock(&lru_lock);
-			got_ref = 0;
+			continue;
 		}
+		nr_skipped++;
+		list_add(&gl->gl_lru, &skipped);
 	}
 	list_splice(&skipped, &lru_list);
 	atomic_add(nr_skipped, &lru_count);
@@ -1727,6 +1765,11 @@ int __init gfs2_glock_init(void)
 	glock_workqueue = create_workqueue("glock_workqueue");
 	if (IS_ERR(glock_workqueue))
 		return PTR_ERR(glock_workqueue);
+	gfs2_delete_workqueue = create_workqueue("delete_workqueue");
+	if (IS_ERR(gfs2_delete_workqueue)) {
+		destroy_workqueue(glock_workqueue);
+		return PTR_ERR(gfs2_delete_workqueue);
+	}
 
 	register_shrinker(&glock_shrinker);
 
@@ -1737,6 +1780,7 @@ void gfs2_glock_exit(void)
 {
 	unregister_shrinker(&glock_shrinker);
 	destroy_workqueue(glock_workqueue);
+	destroy_workqueue(gfs2_delete_workqueue);
 }
 
 static int gfs2_glock_iter_next(struct gfs2_glock_iter *gi)
diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h
index a602a28f6f0..c609894ec0d 100644
--- a/fs/gfs2/glock.h
+++ b/fs/gfs2/glock.h
@@ -143,6 +143,7 @@ struct lm_lockops {
 
 #define GLR_TRYFAILED		13
 
+extern struct workqueue_struct *gfs2_delete_workqueue;
 static inline struct gfs2_holder *gfs2_glock_is_locked_by_me(struct gfs2_glock *gl)
 {
 	struct gfs2_holder *gh;
@@ -191,6 +192,8 @@ static inline int gfs2_glock_is_blocking(struct gfs2_glock *gl)
 int gfs2_glock_get(struct gfs2_sbd *sdp,
 		   u64 number, const struct gfs2_glock_operations *glops,
 		   int create, struct gfs2_glock **glp);
+void gfs2_glock_hold(struct gfs2_glock *gl);
+void gfs2_glock_put_nolock(struct gfs2_glock *gl);
 int gfs2_glock_put(struct gfs2_glock *gl);
 void gfs2_holder_init(struct gfs2_glock *gl, unsigned int state, unsigned flags,
 		      struct gfs2_holder *gh);
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index d5e4ab155ca..6985eef06c3 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -323,6 +323,7 @@ static void trans_go_sync(struct gfs2_glock *gl)
 
 	if (gl->gl_state != LM_ST_UNLOCKED &&
 	    test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags)) {
+		flush_workqueue(gfs2_delete_workqueue);
 		gfs2_meta_syncfs(sdp);
 		gfs2_log_shutdown(sdp);
 	}
@@ -372,6 +373,25 @@ static int trans_go_demote_ok(const struct gfs2_glock *gl)
 	return 0;
 }
 
+/**
+ * iopen_go_callback - schedule the dcache entry for the inode to be deleted
+ * @gl: the glock
+ *
+ * gl_spin lock is held while calling this
+ */
+static void iopen_go_callback(struct gfs2_glock *gl)
+{
+	struct gfs2_inode *ip = (struct gfs2_inode *)gl->gl_object;
+
+	if (gl->gl_demote_state == LM_ST_UNLOCKED &&
+	    gl->gl_state == LM_ST_SHARED &&
+	    ip && test_bit(GIF_USER, &ip->i_flags)) {
+		gfs2_glock_hold(gl);
+		if (queue_work(gfs2_delete_workqueue, &gl->gl_delete) == 0)
+			gfs2_glock_put_nolock(gl);
+	}
+}
+
 const struct gfs2_glock_operations gfs2_meta_glops = {
 	.go_type = LM_TYPE_META,
 };
@@ -406,6 +426,7 @@ const struct gfs2_glock_operations gfs2_trans_glops = {
 
 const struct gfs2_glock_operations gfs2_iopen_glops = {
 	.go_type = LM_TYPE_IOPEN,
+	.go_callback = iopen_go_callback,
 };
 
 const struct gfs2_glock_operations gfs2_flock_glops = {
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 225347fbff3..61801ada36f 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -159,6 +159,7 @@ struct gfs2_glock_operations {
 	int (*go_lock) (struct gfs2_holder *gh);
 	void (*go_unlock) (struct gfs2_holder *gh);
 	int (*go_dump)(struct seq_file *seq, const struct gfs2_glock *gl);
+	void (*go_callback) (struct gfs2_glock *gl);
 	const int go_type;
 	const unsigned long go_min_hold_time;
 };
@@ -228,6 +229,7 @@ struct gfs2_glock {
 	struct list_head gl_ail_list;
 	atomic_t gl_ail_count;
 	struct delayed_work gl_work;
+	struct work_struct gl_delete;
 };
 
 #define GFS2_MIN_LVB_SIZE 32	/* Min size of LVB that gfs2 supports */
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index daa4ae341a2..fba795798d3 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -285,27 +285,19 @@ void gfs2_rgrp_verify(struct gfs2_rgrpd *rgd)
 	}
 
 	tmp = rgd->rd_data - rgd->rd_free - rgd->rd_dinodes;
-	if (count[1] + count[2] != tmp) {
+	if (count[1] != tmp) {
 		if (gfs2_consist_rgrpd(rgd))
 			fs_err(sdp, "used data mismatch:  %u != %u\n",
 			       count[1], tmp);
 		return;
 	}
 
-	if (count[3] != rgd->rd_dinodes) {
+	if (count[2] + count[3] != rgd->rd_dinodes) {
 		if (gfs2_consist_rgrpd(rgd))
 			fs_err(sdp, "used metadata mismatch:  %u != %u\n",
-			       count[3], rgd->rd_dinodes);
+			       count[2] + count[3], rgd->rd_dinodes);
 		return;
 	}
-
-	if (count[2] > count[3]) {
-		if (gfs2_consist_rgrpd(rgd))
-			fs_err(sdp, "unlinked inodes > inodes:  %u\n",
-			       count[2]);
-		return;
-	}
-
 }
 
 static inline int rgrp_contains_block(struct gfs2_rgrpd *rgd, u64 block)
@@ -961,7 +953,8 @@ static int try_rgrp_fit(struct gfs2_rgrpd *rgd, struct gfs2_alloc *al)
  * Returns: The inode, if one has been found
  */
 
-static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked)
+static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked,
+				     u64 skip)
 {
 	struct inode *inode;
 	u32 goal = 0, block;
@@ -985,6 +978,8 @@ static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked)
 		goal++;
 		if (*last_unlinked != NO_BLOCK && no_addr <= *last_unlinked)
 			continue;
+		if (no_addr == skip)
+			continue;
 		*last_unlinked = no_addr;
 		inode = gfs2_inode_lookup(rgd->rd_sbd->sd_vfs, DT_UNKNOWN,
 					  no_addr, -1, 1);
@@ -1104,7 +1099,7 @@ static struct inode *get_local_rgrp(struct gfs2_inode *ip, u64 *last_unlinked)
 			if (try_rgrp_fit(rgd, al))
 				goto out;
 			if (rgd->rd_flags & GFS2_RDF_CHECK)
-				inode = try_rgrp_unlink(rgd, last_unlinked);
+				inode = try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
 			if (!rg_locked)
 				gfs2_glock_dq_uninit(&al->al_rgd_gh);
 			if (inode)
@@ -1138,7 +1133,7 @@ static struct inode *get_local_rgrp(struct gfs2_inode *ip, u64 *last_unlinked)
 			if (try_rgrp_fit(rgd, al))
 				goto out;
 			if (rgd->rd_flags & GFS2_RDF_CHECK)
-				inode = try_rgrp_unlink(rgd, last_unlinked);
+				inode = try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
 			if (!rg_locked)
 				gfs2_glock_dq_uninit(&al->al_rgd_gh);
 			if (inode)
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 0a680133647..f522bb01797 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -353,7 +353,7 @@ fail:
 	return error;
 }
 
-static void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc, const void *buf)
+void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc, const void *buf)
 {
 	const struct gfs2_statfs_change *str = buf;
 
@@ -441,6 +441,29 @@ void gfs2_statfs_change(struct gfs2_sbd *sdp, s64 total, s64 free,
 	brelse(l_bh);
 }
 
+void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh,
+		   struct buffer_head *l_bh)
+{
+	struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
+	struct gfs2_inode *l_ip = GFS2_I(sdp->sd_sc_inode);
+	struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
+	struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local;
+
+	gfs2_trans_add_bh(l_ip->i_gl, l_bh, 1);
+
+	spin_lock(&sdp->sd_statfs_spin);
+	m_sc->sc_total += l_sc->sc_total;
+	m_sc->sc_free += l_sc->sc_free;
+	m_sc->sc_dinodes += l_sc->sc_dinodes;
+	memset(l_sc, 0, sizeof(struct gfs2_statfs_change));
+	memset(l_bh->b_data + sizeof(struct gfs2_dinode),
+	       0, sizeof(struct gfs2_statfs_change));
+	spin_unlock(&sdp->sd_statfs_spin);
+
+	gfs2_trans_add_bh(m_ip->i_gl, m_bh, 1);
+	gfs2_statfs_change_out(m_sc, m_bh->b_data + sizeof(struct gfs2_dinode));
+}
+
 int gfs2_statfs_sync(struct gfs2_sbd *sdp)
 {
 	struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
@@ -477,19 +500,7 @@ int gfs2_statfs_sync(struct gfs2_sbd *sdp)
 	if (error)
 		goto out_bh2;
 
-	gfs2_trans_add_bh(l_ip->i_gl, l_bh, 1);
-
-	spin_lock(&sdp->sd_statfs_spin);
-	m_sc->sc_total += l_sc->sc_total;
-	m_sc->sc_free += l_sc->sc_free;
-	m_sc->sc_dinodes += l_sc->sc_dinodes;
-	memset(l_sc, 0, sizeof(struct gfs2_statfs_change));
-	memset(l_bh->b_data + sizeof(struct gfs2_dinode),
-	       0, sizeof(struct gfs2_statfs_change));
-	spin_unlock(&sdp->sd_statfs_spin);
-
-	gfs2_trans_add_bh(m_ip->i_gl, m_bh, 1);
-	gfs2_statfs_change_out(m_sc, m_bh->b_data + sizeof(struct gfs2_dinode));
+	update_statfs(sdp, m_bh, l_bh);
 
 	gfs2_trans_end(sdp);
 
@@ -680,6 +691,7 @@ static int gfs2_make_fs_ro(struct gfs2_sbd *sdp)
 	struct gfs2_holder t_gh;
 	int error;
 
+	flush_workqueue(gfs2_delete_workqueue);
 	gfs2_quota_sync(sdp);
 	gfs2_statfs_sync(sdp);
 
diff --git a/fs/gfs2/super.h b/fs/gfs2/super.h
index b56413e3e40..22e0417ed99 100644
--- a/fs/gfs2/super.h
+++ b/fs/gfs2/super.h
@@ -40,6 +40,10 @@ extern int gfs2_make_fs_rw(struct gfs2_sbd *sdp);
 extern int gfs2_statfs_init(struct gfs2_sbd *sdp);
 extern void gfs2_statfs_change(struct gfs2_sbd *sdp, s64 total, s64 free,
 			       s64 dinodes);
+extern void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc,
+				  const void *buf);
+extern void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh,
+			  struct buffer_head *l_bh);
 extern int gfs2_statfs_sync(struct gfs2_sbd *sdp);
 
 extern int gfs2_freeze_fs(struct gfs2_sbd *sdp);
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index 23419dc3027..a7cbfbd340c 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -386,16 +386,16 @@ static ssize_t jid_show(struct gfs2_sbd *sdp, char *buf)
 #define GDLM_ATTR(_name,_mode,_show,_store) \
 static struct gfs2_attr gdlm_attr_##_name = __ATTR(_name,_mode,_show,_store)
 
-GDLM_ATTR(proto_name,     0444, proto_name_show,	NULL);
-GDLM_ATTR(block,          0644, block_show,		block_store);
-GDLM_ATTR(withdraw,       0644, withdraw_show,		withdraw_store);
-GDLM_ATTR(id,             0444, lkid_show,		NULL);
-GDLM_ATTR(jid,		  0444, jid_show,		NULL);
-GDLM_ATTR(first,          0444, lkfirst_show,		NULL);
-GDLM_ATTR(first_done,     0444, first_done_show,	NULL);
-GDLM_ATTR(recover,        0200, NULL,			recover_store);
-GDLM_ATTR(recover_done,   0444, recover_done_show,	NULL);
-GDLM_ATTR(recover_status, 0444, recover_status_show,	NULL);
+GDLM_ATTR(proto_name,		0444, proto_name_show,		NULL);
+GDLM_ATTR(block,		0644, block_show,		block_store);
+GDLM_ATTR(withdraw,		0644, withdraw_show,		withdraw_store);
+GDLM_ATTR(id,			0444, lkid_show,		NULL);
+GDLM_ATTR(jid,			0444, jid_show,			NULL);
+GDLM_ATTR(first,		0444, lkfirst_show,		NULL);
+GDLM_ATTR(first_done,		0444, first_done_show,		NULL);
+GDLM_ATTR(recover,		0600, NULL,			recover_store);
+GDLM_ATTR(recover_done,		0444, recover_done_show,	NULL);
+GDLM_ATTR(recover_status,	0444, recover_status_show,	NULL);
 
 static struct attribute *lock_module_attrs[] = {
 	&gdlm_attr_proto_name.attr,
diff --git a/fs/gfs2/trace_gfs2.h b/fs/gfs2/trace_gfs2.h
index 98d6ef1c1dc..148d55c1417 100644
--- a/fs/gfs2/trace_gfs2.h
+++ b/fs/gfs2/trace_gfs2.h
@@ -1,12 +1,11 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM gfs2
+
 #if !defined(_TRACE_GFS2_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_GFS2_H
 
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM gfs2
-#define TRACE_INCLUDE_FILE trace_gfs2
-
 #include <linux/fs.h>
 #include <linux/buffer_head.h>
 #include <linux/dlmconstants.h>
@@ -403,5 +402,6 @@ TRACE_EVENT(gfs2_block_alloc,
 /* This part must be outside protection */
 #undef TRACE_INCLUDE_PATH
 #define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace_gfs2
 #include <trace/define_trace.h>
 
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index 6f833dc8e91..f7fcbe49da7 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -19,6 +19,7 @@
 #include <linux/nls.h>
 #include <linux/parser.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 #include <linux/vfs.h>
 
 #include "hfs_fs.h"
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index 9fc3af0c0da..c0759fe0855 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -12,6 +12,7 @@
 #include <linux/pagemap.h>
 #include <linux/fs.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/vfs.h>
 #include <linux/nls.h>
 
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index fe02ad4740e..032604e5ef2 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -972,6 +972,7 @@ static int hostfs_fill_sb_common(struct super_block *sb, void *d, int silent)
 	sb->s_blocksize_bits = 10;
 	sb->s_magic = HOSTFS_SUPER_MAGIC;
 	sb->s_op = &hostfs_sbops;
+	sb->s_maxbytes = MAX_LFS_FILESIZE;
 
 	/* NULL is printed as <NULL> by sprintf: avoid that. */
 	if (req_root == NULL)
diff --git a/fs/hpfs/dir.c b/fs/hpfs/dir.c
index 6916c41d701..8865c94f55f 100644
--- a/fs/hpfs/dir.c
+++ b/fs/hpfs/dir.c
@@ -6,6 +6,7 @@
  *  directory VFS functions
  */
 
+#include <linux/smp_lock.h>
 #include "hpfs_fn.h"
 
 static int hpfs_dir_release(struct inode *inode, struct file *filp)
diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c
index 64ab5225920..3efabff0036 100644
--- a/fs/hpfs/file.c
+++ b/fs/hpfs/file.c
@@ -6,6 +6,7 @@
  *  file VFS functions
  */
 
+#include <linux/smp_lock.h>
 #include "hpfs_fn.h"
 
 #define BLOCKS(size) (((size) + 511) >> 9)
diff --git a/fs/hpfs/hpfs_fn.h b/fs/hpfs/hpfs_fn.h
index c2ea31bae31..701ca54c086 100644
--- a/fs/hpfs/hpfs_fn.h
+++ b/fs/hpfs/hpfs_fn.h
@@ -13,7 +13,6 @@
 #include <linux/pagemap.h>
 #include <linux/buffer_head.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 
 #include "hpfs.h"
 
diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c
index 39a1bfbea31..fe703ae46bc 100644
--- a/fs/hpfs/inode.c
+++ b/fs/hpfs/inode.c
@@ -6,6 +6,7 @@
  *  inode VFS functions
  */
 
+#include <linux/smp_lock.h>
 #include "hpfs_fn.h"
 
 void hpfs_init_inode(struct inode *i)
diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c
index b649232dde9..82b9c4ba9ed 100644
--- a/fs/hpfs/namei.c
+++ b/fs/hpfs/namei.c
@@ -6,6 +6,7 @@
  *  adding & removing files & directories
  */
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include "hpfs_fn.h"
 
 static int hpfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 941c8425c10..cb88dac8cca 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -935,26 +935,28 @@ static int can_do_hugetlb_shm(void)
 	return capable(CAP_IPC_LOCK) || in_group_p(sysctl_hugetlb_shm_group);
 }
 
-struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag)
+struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag,
+						struct user_struct **user)
 {
 	int error = -ENOMEM;
-	int unlock_shm = 0;
 	struct file *file;
 	struct inode *inode;
 	struct dentry *dentry, *root;
 	struct qstr quick_string;
-	struct user_struct *user = current_user();
 
+	*user = NULL;
 	if (!hugetlbfs_vfsmount)
 		return ERR_PTR(-ENOENT);
 
 	if (!can_do_hugetlb_shm()) {
-		if (user_shm_lock(size, user)) {
-			unlock_shm = 1;
+		*user = current_user();
+		if (user_shm_lock(size, *user)) {
 			WARN_ONCE(1,
 			  "Using mlock ulimits for SHM_HUGETLB deprecated\n");
-		} else
+		} else {
+			*user = NULL;
 			return ERR_PTR(-EPERM);
+		}
 	}
 
 	root = hugetlbfs_vfsmount->mnt_root;
@@ -996,8 +998,10 @@ out_inode:
 out_dentry:
 	dput(dentry);
 out_shm_unlock:
-	if (unlock_shm)
-		user_shm_unlock(size, user);
+	if (*user) {
+		user_shm_unlock(size, *user);
+		*user = NULL;
+	}
 	return ERR_PTR(error);
 }
 
diff --git a/fs/inode.c b/fs/inode.c
index 901bad1e5f1..ae7b67e4866 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -120,12 +120,11 @@ static void wake_up_inode(struct inode *inode)
  * These are initializations that need to be done on every inode
  * allocation as the fields are not initialised by slab allocation.
  */
-struct inode *inode_init_always(struct super_block *sb, struct inode *inode)
+int inode_init_always(struct super_block *sb, struct inode *inode)
 {
 	static const struct address_space_operations empty_aops;
 	static struct inode_operations empty_iops;
 	static const struct file_operations empty_fops;
-
 	struct address_space *const mapping = &inode->i_data;
 
 	inode->i_sb = sb;
@@ -152,7 +151,7 @@ struct inode *inode_init_always(struct super_block *sb, struct inode *inode)
 	inode->dirtied_when = 0;
 
 	if (security_inode_alloc(inode))
-		goto out_free_inode;
+		goto out;
 
 	/* allocate and initialize an i_integrity */
 	if (ima_inode_alloc(inode))
@@ -198,16 +197,12 @@ struct inode *inode_init_always(struct super_block *sb, struct inode *inode)
 	inode->i_fsnotify_mask = 0;
 #endif
 
-	return inode;
+	return 0;
 
 out_free_security:
 	security_inode_free(inode);
-out_free_inode:
-	if (inode->i_sb->s_op->destroy_inode)
-		inode->i_sb->s_op->destroy_inode(inode);
-	else
-		kmem_cache_free(inode_cachep, (inode));
-	return NULL;
+out:
+	return -ENOMEM;
 }
 EXPORT_SYMBOL(inode_init_always);
 
@@ -220,12 +215,21 @@ static struct inode *alloc_inode(struct super_block *sb)
 	else
 		inode = kmem_cache_alloc(inode_cachep, GFP_KERNEL);
 
-	if (inode)
-		return inode_init_always(sb, inode);
-	return NULL;
+	if (!inode)
+		return NULL;
+
+	if (unlikely(inode_init_always(sb, inode))) {
+		if (inode->i_sb->s_op->destroy_inode)
+			inode->i_sb->s_op->destroy_inode(inode);
+		else
+			kmem_cache_free(inode_cachep, inode);
+		return NULL;
+	}
+
+	return inode;
 }
 
-void destroy_inode(struct inode *inode)
+void __destroy_inode(struct inode *inode)
 {
 	BUG_ON(inode_has_buffers(inode));
 	ima_inode_free(inode);
@@ -237,13 +241,17 @@ void destroy_inode(struct inode *inode)
 	if (inode->i_default_acl && inode->i_default_acl != ACL_NOT_CACHED)
 		posix_acl_release(inode->i_default_acl);
 #endif
+}
+EXPORT_SYMBOL(__destroy_inode);
+
+void destroy_inode(struct inode *inode)
+{
+	__destroy_inode(inode);
 	if (inode->i_sb->s_op->destroy_inode)
 		inode->i_sb->s_op->destroy_inode(inode);
 	else
 		kmem_cache_free(inode_cachep, (inode));
 }
-EXPORT_SYMBOL(destroy_inode);
-
 
 /*
  * These are initializations that only need to be done
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 58a7963e168..85f96bc651c 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -142,6 +142,7 @@ static const struct dentry_operations isofs_dentry_ops[] = {
 
 struct iso9660_options{
 	unsigned int rock:1;
+	unsigned int joliet:1;
 	unsigned int cruft:1;
 	unsigned int hide:1;
 	unsigned int showassoc:1;
@@ -151,7 +152,6 @@ struct iso9660_options{
 	unsigned int gid_set:1;
 	unsigned int utf8:1;
 	unsigned char map;
-	char joliet;
 	unsigned char check;
 	unsigned int blocksize;
 	mode_t fmode;
@@ -632,7 +632,7 @@ static int isofs_fill_super(struct super_block *s, void *data, int silent)
 			else if (isonum_711(vdp->type) == ISO_VD_SUPPLEMENTARY) {
 				sec = (struct iso_supplementary_descriptor *)vdp;
 				if (sec->escape[0] == 0x25 && sec->escape[1] == 0x2f) {
-					if (opt.joliet == 'y') {
+					if (opt.joliet) {
 						if (sec->escape[2] == 0x40)
 							joliet_level = 1;
 						else if (sec->escape[2] == 0x43)
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index 737f7246a4b..f96f85092d1 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -287,6 +287,7 @@ int journal_write_metadata_buffer(transaction_t *transaction,
 	struct page *new_page;
 	unsigned int new_offset;
 	struct buffer_head *bh_in = jh2bh(jh_in);
+	journal_t *journal = transaction->t_journal;
 
 	/*
 	 * The buffer really shouldn't be locked: only the current committing
@@ -300,6 +301,11 @@ int journal_write_metadata_buffer(transaction_t *transaction,
 	J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in));
 
 	new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL);
+	/* keep subsequent assertions sane */
+	new_bh->b_state = 0;
+	init_buffer(new_bh, NULL, NULL);
+	atomic_set(&new_bh->b_count, 1);
+	new_jh = journal_add_journal_head(new_bh);	/* This sleeps */
 
 	/*
 	 * If a new transaction has already done a buffer copy-out, then
@@ -361,14 +367,6 @@ repeat:
 		kunmap_atomic(mapped_data, KM_USER0);
 	}
 
-	/* keep subsequent assertions sane */
-	new_bh->b_state = 0;
-	init_buffer(new_bh, NULL, NULL);
-	atomic_set(&new_bh->b_count, 1);
-	jbd_unlock_bh_state(bh_in);
-
-	new_jh = journal_add_journal_head(new_bh);	/* This sleeps */
-
 	set_bh_page(new_bh, new_page, new_offset);
 	new_jh->b_transaction = NULL;
 	new_bh->b_size = jh2bh(jh_in)->b_size;
@@ -385,7 +383,11 @@ repeat:
 	 * copying is moved to the transaction's shadow queue.
 	 */
 	JBUFFER_TRACE(jh_in, "file as BJ_Shadow");
-	journal_file_buffer(jh_in, transaction, BJ_Shadow);
+	spin_lock(&journal->j_list_lock);
+	__journal_file_buffer(jh_in, transaction, BJ_Shadow);
+	spin_unlock(&journal->j_list_lock);
+	jbd_unlock_bh_state(bh_in);
+
 	JBUFFER_TRACE(new_jh, "file as BJ_IO");
 	journal_file_buffer(new_jh, transaction, BJ_IO);
 
@@ -848,6 +850,12 @@ static int journal_reset(journal_t *journal)
 
 	first = be32_to_cpu(sb->s_first);
 	last = be32_to_cpu(sb->s_maxlen);
+	if (first + JFS_MIN_JOURNAL_BLOCKS > last + 1) {
+		printk(KERN_ERR "JBD: Journal too short (blocks %lu-%lu).\n",
+		       first, last);
+		journal_fail_superblock(journal);
+		return -EINVAL;
+	}
 
 	journal->j_first = first;
 	journal->j_last = last;
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 73242ba7c7b..c03ac11f74b 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -489,34 +489,15 @@ void journal_unlock_updates (journal_t *journal)
 	wake_up(&journal->j_wait_transaction_locked);
 }
 
-/*
- * Report any unexpected dirty buffers which turn up.  Normally those
- * indicate an error, but they can occur if the user is running (say)
- * tune2fs to modify the live filesystem, so we need the option of
- * continuing as gracefully as possible.  #
- *
- * The caller should already hold the journal lock and
- * j_list_lock spinlock: most callers will need those anyway
- * in order to probe the buffer's journaling state safely.
- */
-static void jbd_unexpected_dirty_buffer(struct journal_head *jh)
+static void warn_dirty_buffer(struct buffer_head *bh)
 {
-	int jlist;
-
-	/* If this buffer is one which might reasonably be dirty
-	 * --- ie. data, or not part of this journal --- then
-	 * we're OK to leave it alone, but otherwise we need to
-	 * move the dirty bit to the journal's own internal
-	 * JBDDirty bit. */
-	jlist = jh->b_jlist;
+	char b[BDEVNAME_SIZE];
 
-	if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
-	    jlist == BJ_Shadow || jlist == BJ_Forget) {
-		struct buffer_head *bh = jh2bh(jh);
-
-		if (test_clear_buffer_dirty(bh))
-			set_buffer_jbddirty(bh);
-	}
+	printk(KERN_WARNING
+	       "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). "
+	       "There's a risk of filesystem corruption in case of system "
+	       "crash.\n",
+	       bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr);
 }
 
 /*
@@ -583,14 +564,16 @@ repeat:
 			if (jh->b_next_transaction)
 				J_ASSERT_JH(jh, jh->b_next_transaction ==
 							transaction);
+			warn_dirty_buffer(bh);
 		}
 		/*
 		 * In any case we need to clean the dirty flag and we must
 		 * do it under the buffer lock to be sure we don't race
 		 * with running write-out.
 		 */
-		JBUFFER_TRACE(jh, "Unexpected dirty buffer");
-		jbd_unexpected_dirty_buffer(jh);
+		JBUFFER_TRACE(jh, "Journalling dirty buffer");
+		clear_buffer_dirty(bh);
+		set_buffer_jbddirty(bh);
 	}
 
 	unlock_buffer(bh);
@@ -826,6 +809,15 @@ int journal_get_create_access(handle_t *handle, struct buffer_head *bh)
 	J_ASSERT_JH(jh, buffer_locked(jh2bh(jh)));
 
 	if (jh->b_transaction == NULL) {
+		/*
+		 * Previous journal_forget() could have left the buffer
+		 * with jbddirty bit set because it was being committed. When
+		 * the commit finished, we've filed the buffer for
+		 * checkpointing and marked it dirty. Now we are reallocating
+		 * the buffer so the transaction freeing it must have
+		 * committed and so it's safe to clear the dirty bit.
+		 */
+		clear_buffer_dirty(jh2bh(jh));
 		jh->b_transaction = transaction;
 
 		/* first access by this transaction */
@@ -1782,8 +1774,13 @@ static int __dispose_buffer(struct journal_head *jh, transaction_t *transaction)
 
 	if (jh->b_cp_transaction) {
 		JBUFFER_TRACE(jh, "on running+cp transaction");
+		/*
+		 * We don't want to write the buffer anymore, clear the
+		 * bit so that we don't confuse checks in
+		 * __journal_file_buffer
+		 */
+		clear_buffer_dirty(bh);
 		__journal_file_buffer(jh, transaction, BJ_Forget);
-		clear_buffer_jbddirty(bh);
 		may_free = 0;
 	} else {
 		JBUFFER_TRACE(jh, "on running transaction");
@@ -2041,12 +2038,17 @@ void __journal_file_buffer(struct journal_head *jh,
 	if (jh->b_transaction && jh->b_jlist == jlist)
 		return;
 
-	/* The following list of buffer states needs to be consistent
-	 * with __jbd_unexpected_dirty_buffer()'s handling of dirty
-	 * state. */
-
 	if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
 	    jlist == BJ_Shadow || jlist == BJ_Forget) {
+		/*
+		 * For metadata buffers, we track dirty bit in buffer_jbddirty
+		 * instead of buffer_dirty. We should not see a dirty bit set
+		 * here because we clear it in do_get_write_access but e.g.
+		 * tune2fs can modify the sb and set the dirty bit at any time
+		 * so we try to gracefully handle that.
+		 */
+		if (buffer_dirty(bh))
+			warn_dirty_buffer(bh);
 		if (test_clear_buffer_dirty(bh) ||
 		    test_clear_buffer_jbddirty(bh))
 			was_dirty = 1;
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 18bfd5dab64..e378cb38397 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -297,6 +297,7 @@ int jbd2_journal_write_metadata_buffer(transaction_t *transaction,
 	unsigned int new_offset;
 	struct buffer_head *bh_in = jh2bh(jh_in);
 	struct jbd2_buffer_trigger_type *triggers;
+	journal_t *journal = transaction->t_journal;
 
 	/*
 	 * The buffer really shouldn't be locked: only the current committing
@@ -310,6 +311,11 @@ int jbd2_journal_write_metadata_buffer(transaction_t *transaction,
 	J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in));
 
 	new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL);
+	/* keep subsequent assertions sane */
+	new_bh->b_state = 0;
+	init_buffer(new_bh, NULL, NULL);
+	atomic_set(&new_bh->b_count, 1);
+	new_jh = jbd2_journal_add_journal_head(new_bh);	/* This sleeps */
 
 	/*
 	 * If a new transaction has already done a buffer copy-out, then
@@ -388,14 +394,6 @@ repeat:
 		kunmap_atomic(mapped_data, KM_USER0);
 	}
 
-	/* keep subsequent assertions sane */
-	new_bh->b_state = 0;
-	init_buffer(new_bh, NULL, NULL);
-	atomic_set(&new_bh->b_count, 1);
-	jbd_unlock_bh_state(bh_in);
-
-	new_jh = jbd2_journal_add_journal_head(new_bh);	/* This sleeps */
-
 	set_bh_page(new_bh, new_page, new_offset);
 	new_jh->b_transaction = NULL;
 	new_bh->b_size = jh2bh(jh_in)->b_size;
@@ -412,7 +410,11 @@ repeat:
 	 * copying is moved to the transaction's shadow queue.
 	 */
 	JBUFFER_TRACE(jh_in, "file as BJ_Shadow");
-	jbd2_journal_file_buffer(jh_in, transaction, BJ_Shadow);
+	spin_lock(&journal->j_list_lock);
+	__jbd2_journal_file_buffer(jh_in, transaction, BJ_Shadow);
+	spin_unlock(&journal->j_list_lock);
+	jbd_unlock_bh_state(bh_in);
+
 	JBUFFER_TRACE(new_jh, "file as BJ_IO");
 	jbd2_journal_file_buffer(new_jh, transaction, BJ_IO);
 
@@ -2410,6 +2412,7 @@ const char *jbd2_dev_to_name(dev_t device)
 	int	i = hash_32(device, CACHE_SIZE_BITS);
 	char	*ret;
 	struct block_device *bd;
+	static struct devname_cache *new_dev;
 
 	rcu_read_lock();
 	if (devcache[i] && devcache[i]->device == device) {
@@ -2419,20 +2422,20 @@ const char *jbd2_dev_to_name(dev_t device)
 	}
 	rcu_read_unlock();
 
+	new_dev = kmalloc(sizeof(struct devname_cache), GFP_KERNEL);
+	if (!new_dev)
+		return "NODEV-ALLOCFAILURE"; /* Something non-NULL */
 	spin_lock(&devname_cache_lock);
 	if (devcache[i]) {
 		if (devcache[i]->device == device) {
+			kfree(new_dev);
 			ret = devcache[i]->devname;
 			spin_unlock(&devname_cache_lock);
 			return ret;
 		}
 		call_rcu(&devcache[i]->rcu, free_devcache);
 	}
-	devcache[i] = kmalloc(sizeof(struct devname_cache), GFP_KERNEL);
-	if (!devcache[i]) {
-		spin_unlock(&devname_cache_lock);
-		return "NODEV-ALLOCFAILURE"; /* Something non-NULL */
-	}
+	devcache[i] = new_dev;
 	devcache[i]->device = device;
 	bd = bdget(device);
 	if (bd) {
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 494501edba6..6213ac728f3 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -499,34 +499,15 @@ void jbd2_journal_unlock_updates (journal_t *journal)
 	wake_up(&journal->j_wait_transaction_locked);
 }
 
-/*
- * Report any unexpected dirty buffers which turn up.  Normally those
- * indicate an error, but they can occur if the user is running (say)
- * tune2fs to modify the live filesystem, so we need the option of
- * continuing as gracefully as possible.  #
- *
- * The caller should already hold the journal lock and
- * j_list_lock spinlock: most callers will need those anyway
- * in order to probe the buffer's journaling state safely.
- */
-static void jbd_unexpected_dirty_buffer(struct journal_head *jh)
+static void warn_dirty_buffer(struct buffer_head *bh)
 {
-	int jlist;
-
-	/* If this buffer is one which might reasonably be dirty
-	 * --- ie. data, or not part of this journal --- then
-	 * we're OK to leave it alone, but otherwise we need to
-	 * move the dirty bit to the journal's own internal
-	 * JBDDirty bit. */
-	jlist = jh->b_jlist;
+	char b[BDEVNAME_SIZE];
 
-	if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
-	    jlist == BJ_Shadow || jlist == BJ_Forget) {
-		struct buffer_head *bh = jh2bh(jh);
-
-		if (test_clear_buffer_dirty(bh))
-			set_buffer_jbddirty(bh);
-	}
+	printk(KERN_WARNING
+	       "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). "
+	       "There's a risk of filesystem corruption in case of system "
+	       "crash.\n",
+	       bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr);
 }
 
 /*
@@ -593,14 +574,16 @@ repeat:
 			if (jh->b_next_transaction)
 				J_ASSERT_JH(jh, jh->b_next_transaction ==
 							transaction);
+			warn_dirty_buffer(bh);
 		}
 		/*
 		 * In any case we need to clean the dirty flag and we must
 		 * do it under the buffer lock to be sure we don't race
 		 * with running write-out.
 		 */
-		JBUFFER_TRACE(jh, "Unexpected dirty buffer");
-		jbd_unexpected_dirty_buffer(jh);
+		JBUFFER_TRACE(jh, "Journalling dirty buffer");
+		clear_buffer_dirty(bh);
+		set_buffer_jbddirty(bh);
 	}
 
 	unlock_buffer(bh);
@@ -843,6 +826,15 @@ int jbd2_journal_get_create_access(handle_t *handle, struct buffer_head *bh)
 	J_ASSERT_JH(jh, buffer_locked(jh2bh(jh)));
 
 	if (jh->b_transaction == NULL) {
+		/*
+		 * Previous jbd2_journal_forget() could have left the buffer
+		 * with jbddirty bit set because it was being committed. When
+		 * the commit finished, we've filed the buffer for
+		 * checkpointing and marked it dirty. Now we are reallocating
+		 * the buffer so the transaction freeing it must have
+		 * committed and so it's safe to clear the dirty bit.
+		 */
+		clear_buffer_dirty(jh2bh(jh));
 		jh->b_transaction = transaction;
 
 		/* first access by this transaction */
@@ -1644,8 +1636,13 @@ static int __dispose_buffer(struct journal_head *jh, transaction_t *transaction)
 
 	if (jh->b_cp_transaction) {
 		JBUFFER_TRACE(jh, "on running+cp transaction");
+		/*
+		 * We don't want to write the buffer anymore, clear the
+		 * bit so that we don't confuse checks in
+		 * __journal_file_buffer
+		 */
+		clear_buffer_dirty(bh);
 		__jbd2_journal_file_buffer(jh, transaction, BJ_Forget);
-		clear_buffer_jbddirty(bh);
 		may_free = 0;
 	} else {
 		JBUFFER_TRACE(jh, "on running transaction");
@@ -1896,12 +1893,17 @@ void __jbd2_journal_file_buffer(struct journal_head *jh,
 	if (jh->b_transaction && jh->b_jlist == jlist)
 		return;
 
-	/* The following list of buffer states needs to be consistent
-	 * with __jbd_unexpected_dirty_buffer()'s handling of dirty
-	 * state. */
-
 	if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
 	    jlist == BJ_Shadow || jlist == BJ_Forget) {
+		/*
+		 * For metadata buffers, we track dirty bit in buffer_jbddirty
+		 * instead of buffer_dirty. We should not see a dirty bit set
+		 * here because we clear it in do_get_write_access but e.g.
+		 * tune2fs can modify the sb and set the dirty bit at any time
+		 * so we try to gracefully handle that.
+		 */
+		if (buffer_dirty(bh))
+			warn_dirty_buffer(bh);
 		if (test_clear_buffer_dirty(bh) ||
 		    test_clear_buffer_jbddirty(bh))
 			was_dirty = 1;
diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index a0244740b75..b47679be118 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -270,19 +270,21 @@ static inline void jffs2_remove_node_refs_from_ino_list(struct jffs2_sb_info *c,
 	D2({
 		int i=0;
 		struct jffs2_raw_node_ref *this;
-		printk(KERN_DEBUG "After remove_node_refs_from_ino_list: \n" KERN_DEBUG);
+		printk(KERN_DEBUG "After remove_node_refs_from_ino_list: \n");
 
 		this = ic->nodes;
 
+		printk(KERN_DEBUG);
 		while(this) {
-			printk( "0x%08x(%d)->", ref_offset(this), ref_flags(this));
+			printk(KERN_CONT "0x%08x(%d)->",
+			       ref_offset(this), ref_flags(this));
 			if (++i == 5) {
-				printk("\n" KERN_DEBUG);
+				printk(KERN_DEBUG);
 				i=0;
 			}
 			this = this->next_in_ino;
 		}
-		printk("\n");
+		printk(KERN_CONT "\n");
 	});
 
 	switch (ic->class) {
diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index 5edc2bf2058..23c94753986 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -99,7 +99,7 @@ static int jffs2_do_readpage_nolock (struct inode *inode, struct page *pg)
 	kunmap(pg);
 
 	D2(printk(KERN_DEBUG "readpage finished\n"));
-	return 0;
+	return ret;
 }
 
 int jffs2_do_readpage_unlock(struct inode *inode, struct page *pg)
diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
index 7515e73e2bf..696686cc206 100644
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -130,9 +130,9 @@ int jffs2_scan_medium(struct jffs2_sb_info *c)
 	if (jffs2_sum_active()) {
 		s = kzalloc(sizeof(struct jffs2_summary), GFP_KERNEL);
 		if (!s) {
-			kfree(flashbuf);
 			JFFS2_WARNING("Can't allocate memory for summary\n");
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto out;
 		}
 	}
 
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index 07a22caf268..0035c021395 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/fs.h>
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index d9a721e6db7..5ef7bac265e 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -1268,10 +1268,20 @@ int jffs2_nor_wbuf_flash_setup(struct jffs2_sb_info *c) {
 	if (!c->wbuf)
 		return -ENOMEM;
 
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+	c->wbuf_verify = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
+	if (!c->wbuf_verify) {
+		kfree(c->wbuf);
+		return -ENOMEM;
+	}
+#endif
 	return 0;
 }
 
 void jffs2_nor_wbuf_flash_cleanup(struct jffs2_sb_info *c) {
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+	kfree(c->wbuf_verify);
+#endif
 	kfree(c->wbuf);
 }
 
diff --git a/fs/jfs/acl.c b/fs/jfs/acl.c
index 91fa3ad6e8c..a29c7c3e3fb 100644
--- a/fs/jfs/acl.c
+++ b/fs/jfs/acl.c
@@ -67,10 +67,8 @@ static struct posix_acl *jfs_get_acl(struct inode *inode, int type)
 		acl = posix_acl_from_xattr(value, size);
 	}
 	kfree(value);
-	if (!IS_ERR(acl)) {
+	if (!IS_ERR(acl))
 		set_cached_acl(inode, type, acl);
-		posix_acl_release(acl);
-	}
 	return acl;
 }
 
diff --git a/fs/libfs.c b/fs/libfs.c
index ddfa89948c3..dcec3d3ea64 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -217,7 +217,7 @@ int get_sb_pseudo(struct file_system_type *fs_type, char *name,
 		return PTR_ERR(s);
 
 	s->s_flags = MS_NOUSER;
-	s->s_maxbytes = ~0ULL;
+	s->s_maxbytes = MAX_LFS_FILESIZE;
 	s->s_blocksize = PAGE_SIZE;
 	s->s_blocksize_bits = PAGE_SHIFT;
 	s->s_magic = magic;
diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c
index f2fdcbce143..4336adba952 100644
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
diff --git a/fs/lockd/svc4proc.c b/fs/lockd/svc4proc.c
index 1725037374c..bd173a6ca3b 100644
--- a/fs/lockd/svc4proc.c
+++ b/fs/lockd/svc4proc.c
@@ -10,6 +10,7 @@
 #include <linux/types.h>
 #include <linux/time.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/in.h>
 #include <linux/sunrpc/svc.h>
 #include <linux/sunrpc/clnt.h>
diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c
index 3688e55901f..e1d28ddd216 100644
--- a/fs/lockd/svcproc.c
+++ b/fs/lockd/svcproc.c
@@ -10,6 +10,7 @@
 #include <linux/types.h>
 #include <linux/time.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/in.h>
 #include <linux/sunrpc/svc.h>
 #include <linux/sunrpc/clnt.h>
diff --git a/fs/namei.c b/fs/namei.c
index 5b961eb71cb..1f13751693a 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1542,28 +1542,31 @@ int may_open(struct path *path, int acc_mode, int flag)
 	 * An append-only file must be opened in append mode for writing.
 	 */
 	if (IS_APPEND(inode)) {
+		error = -EPERM;
 		if  ((flag & FMODE_WRITE) && !(flag & O_APPEND))
-			return -EPERM;
+			goto err_out;
 		if (flag & O_TRUNC)
-			return -EPERM;
+			goto err_out;
 	}
 
 	/* O_NOATIME can only be set by the owner or superuser */
 	if (flag & O_NOATIME)
-		if (!is_owner_or_cap(inode))
-			return -EPERM;
+		if (!is_owner_or_cap(inode)) {
+			error = -EPERM;
+			goto err_out;
+		}
 
 	/*
 	 * Ensure there are no outstanding leases on the file.
 	 */
 	error = break_lease(inode, flag);
 	if (error)
-		return error;
+		goto err_out;
 
 	if (flag & O_TRUNC) {
 		error = get_write_access(inode);
 		if (error)
-			return error;
+			goto err_out;
 
 		/*
 		 * Refuse to truncate files with mandatory locks held on them.
@@ -1581,12 +1584,17 @@ int may_open(struct path *path, int acc_mode, int flag)
 		}
 		put_write_access(inode);
 		if (error)
-			return error;
+			goto err_out;
 	} else
 		if (flag & FMODE_WRITE)
 			vfs_dq_init(inode);
 
 	return 0;
+err_out:
+	ima_counts_put(path, acc_mode ?
+		       acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC) :
+		       ACC_MODE(flag) & (MAY_READ | MAY_WRITE));
+	return error;
 }
 
 /*
@@ -1761,6 +1769,10 @@ do_last:
 			goto exit;
 		}
 		filp = nameidata_to_filp(&nd, open_flag);
+		if (IS_ERR(filp))
+			ima_counts_put(&nd.path,
+				       acc_mode & (MAY_READ | MAY_WRITE |
+						   MAY_EXEC));
 		mnt_drop_write(nd.path.mnt);
 		if (nd.root.mnt)
 			path_put(&nd.root);
@@ -1817,6 +1829,9 @@ ok:
 		goto exit;
 	}
 	filp = nameidata_to_filp(&nd, open_flag);
+	if (IS_ERR(filp))
+		ima_counts_put(&nd.path,
+			       acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC));
 	/*
 	 * It is now safe to drop the mnt write
 	 * because the filp has had a write taken
diff --git a/fs/namespace.c b/fs/namespace.c
index 3dc283fd471..7230787d18b 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -22,6 +22,7 @@
 #include <linux/seq_file.h>
 #include <linux/mnt_namespace.h>
 #include <linux/namei.h>
+#include <linux/nsproxy.h>
 #include <linux/security.h>
 #include <linux/mount.h>
 #include <linux/ramfs.h>
@@ -315,7 +316,8 @@ EXPORT_SYMBOL_GPL(mnt_clone_write);
  */
 int mnt_want_write_file(struct file *file)
 {
-	if (!(file->f_mode & FMODE_WRITE))
+	struct inode *inode = file->f_dentry->d_inode;
+	if (!(file->f_mode & FMODE_WRITE) || special_file(inode->i_mode))
 		return mnt_want_write(file->f_path.mnt);
 	else
 		return mnt_clone_write(file->f_path.mnt);
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index c2d061675d8..8d25ccb2d51 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -1242,20 +1242,6 @@ error:
 	return error;
 }
 
-/*
- * Initialize a session.
- * Note: save the mount rsize and wsize for create_server negotiation.
- */
-static void nfs4_init_session(struct nfs_client *clp,
-			      unsigned int wsize, unsigned int rsize)
-{
-#if defined(CONFIG_NFS_V4_1)
-	if (nfs4_has_session(clp)) {
-		clp->cl_session->fc_attrs.max_rqst_sz = wsize;
-		clp->cl_session->fc_attrs.max_resp_sz = rsize;
-	}
-#endif /* CONFIG_NFS_V4_1 */
-}
 
 /*
  * Session has been established, and the client marked ready.
@@ -1350,7 +1336,9 @@ struct nfs_server *nfs4_create_server(const struct nfs_parsed_mount_data *data,
 	BUG_ON(!server->nfs_client->rpc_ops);
 	BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
 
-	nfs4_init_session(server->nfs_client, server->wsize, server->rsize);
+	error = nfs4_init_session(server);
+	if (error < 0)
+		goto error;
 
 	/* Probe the root fh to retrieve its FSID */
 	error = nfs4_path_walk(server, mntfh, data->nfs_server.export_path);
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index af05b918cb5..6dd48a4405b 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -10,6 +10,7 @@
 #include <linux/kthread.h>
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 
 #include <linux/nfs4.h>
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 89f98e9a024..32062c33c85 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -29,7 +29,6 @@
 #include <linux/nfs_fs.h>
 #include <linux/nfs_mount.h>
 #include <linux/pagemap.h>
-#include <linux/smp_lock.h>
 #include <linux/pagevec.h>
 #include <linux/namei.h>
 #include <linux/mount.h>
@@ -1026,12 +1025,12 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry
 				res = NULL;
 				goto out;
 			/* This turned out not to be a regular file */
-			case -EISDIR:
 			case -ENOTDIR:
 				goto no_open;
 			case -ELOOP:
 				if (!(nd->intent.open.flags & O_NOFOLLOW))
 					goto no_open;
+			/* case -EISDIR: */
 			/* case -EINVAL: */
 			default:
 				goto out;
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 489fc01a320..e4e089a8f29 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -255,7 +255,7 @@ static void nfs_direct_read_release(void *calldata)
 
 	if (put_dreq(dreq))
 		nfs_direct_complete(dreq);
-	nfs_readdata_release(calldata);
+	nfs_readdata_free(data);
 }
 
 static const struct rpc_call_ops nfs_read_direct_ops = {
@@ -314,14 +314,14 @@ static ssize_t nfs_direct_read_schedule_segment(struct nfs_direct_req *dreq,
 					data->npages, 1, 0, data->pagevec, NULL);
 		up_read(&current->mm->mmap_sem);
 		if (result < 0) {
-			nfs_readdata_release(data);
+			nfs_readdata_free(data);
 			break;
 		}
 		if ((unsigned)result < data->npages) {
 			bytes = result * PAGE_SIZE;
 			if (bytes <= pgbase) {
 				nfs_direct_release_pages(data->pagevec, result);
-				nfs_readdata_release(data);
+				nfs_readdata_free(data);
 				break;
 			}
 			bytes -= pgbase;
@@ -334,7 +334,7 @@ static ssize_t nfs_direct_read_schedule_segment(struct nfs_direct_req *dreq,
 		data->inode = inode;
 		data->cred = msg.rpc_cred;
 		data->args.fh = NFS_FH(inode);
-		data->args.context = get_nfs_open_context(ctx);
+		data->args.context = ctx;
 		data->args.offset = pos;
 		data->args.pgbase = pgbase;
 		data->args.pages = data->pagevec;
@@ -441,7 +441,7 @@ static void nfs_direct_free_writedata(struct nfs_direct_req *dreq)
 		struct nfs_write_data *data = list_entry(dreq->rewrite_list.next, struct nfs_write_data, pages);
 		list_del(&data->pages);
 		nfs_direct_release_pages(data->pagevec, data->npages);
-		nfs_writedata_release(data);
+		nfs_writedata_free(data);
 	}
 }
 
@@ -534,7 +534,7 @@ static void nfs_direct_commit_release(void *calldata)
 
 	dprintk("NFS: %5u commit returned %d\n", data->task.tk_pid, status);
 	nfs_direct_write_complete(dreq, data->inode);
-	nfs_commitdata_release(calldata);
+	nfs_commit_free(data);
 }
 
 static const struct rpc_call_ops nfs_commit_direct_ops = {
@@ -570,7 +570,7 @@ static void nfs_direct_commit_schedule(struct nfs_direct_req *dreq)
 	data->args.fh = NFS_FH(data->inode);
 	data->args.offset = 0;
 	data->args.count = 0;
-	data->args.context = get_nfs_open_context(dreq->ctx);
+	data->args.context = dreq->ctx;
 	data->res.count = 0;
 	data->res.fattr = &data->fattr;
 	data->res.verf = &data->verf;
@@ -734,14 +734,14 @@ static ssize_t nfs_direct_write_schedule_segment(struct nfs_direct_req *dreq,
 					data->npages, 0, 0, data->pagevec, NULL);
 		up_read(&current->mm->mmap_sem);
 		if (result < 0) {
-			nfs_writedata_release(data);
+			nfs_writedata_free(data);
 			break;
 		}
 		if ((unsigned)result < data->npages) {
 			bytes = result * PAGE_SIZE;
 			if (bytes <= pgbase) {
 				nfs_direct_release_pages(data->pagevec, result);
-				nfs_writedata_release(data);
+				nfs_writedata_free(data);
 				break;
 			}
 			bytes -= pgbase;
@@ -756,7 +756,7 @@ static ssize_t nfs_direct_write_schedule_segment(struct nfs_direct_req *dreq,
 		data->inode = inode;
 		data->cred = msg.rpc_cred;
 		data->args.fh = NFS_FH(inode);
-		data->args.context = get_nfs_open_context(ctx);
+		data->args.context = ctx;
 		data->args.offset = pos;
 		data->args.pgbase = pgbase;
 		data->args.pages = data->pagevec;
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 0055b813ec2..05062329b67 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -26,7 +26,6 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/pagemap.h>
-#include <linux/smp_lock.h>
 #include <linux/aio.h>
 
 #include <asm/uaccess.h>
diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c
index 46177cb8706..b35d2a61606 100644
--- a/fs/nfs/getroot.c
+++ b/fs/nfs/getroot.c
@@ -30,7 +30,6 @@
 #include <linux/nfs_idmap.h>
 #include <linux/vfs.h>
 #include <linux/namei.h>
-#include <linux/mnt_namespace.h>
 #include <linux/security.h>
 
 #include <asm/system.h>
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 64f87194d39..bd7938eda6a 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -30,7 +30,6 @@
 #include <linux/nfs_mount.h>
 #include <linux/nfs4_mount.h>
 #include <linux/lockd/bind.h>
-#include <linux/smp_lock.h>
 #include <linux/seq_file.h>
 #include <linux/mount.h>
 #include <linux/nfs_idmap.h>
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index 61bc3a32e1e..6ea07a3c75d 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -220,6 +220,7 @@ extern void nfs4_destroy_session(struct nfs4_session *session);
 extern struct nfs4_session *nfs4_alloc_session(struct nfs_client *clp);
 extern int nfs4_proc_create_session(struct nfs_client *, int reset);
 extern int nfs4_proc_destroy_session(struct nfs4_session *);
+extern int nfs4_init_session(struct nfs_server *server);
 #else /* CONFIG_NFS_v4_1 */
 static inline int nfs4_setup_sequence(struct nfs_client *clp,
 		struct nfs4_sequence_args *args, struct nfs4_sequence_res *res,
@@ -227,6 +228,11 @@ static inline int nfs4_setup_sequence(struct nfs_client *clp,
 {
 	return 0;
 }
+
+static inline int nfs4_init_session(struct nfs_server *server)
+{
+	return 0;
+}
 #endif /* CONFIG_NFS_V4_1 */
 
 extern struct nfs4_state_maintenance_ops *nfs4_state_renewal_ops[];
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 92ce4351781..6917311f201 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -45,7 +45,6 @@
 #include <linux/nfs4.h>
 #include <linux/nfs_fs.h>
 #include <linux/nfs_page.h>
-#include <linux/smp_lock.h>
 #include <linux/namei.h>
 #include <linux/mount.h>
 #include <linux/module.h>
@@ -2041,15 +2040,9 @@ static int _nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle,
 		.rpc_argp = &args,
 		.rpc_resp = &res,
 	};
-	int status;
 
 	nfs_fattr_init(info->fattr);
-	status = nfs4_recover_expired_lease(server);
-	if (!status)
-		status = nfs4_check_client_ready(server->nfs_client);
-	if (!status)
-		status = nfs4_call_sync(server, &msg, &args, &res, 0);
-	return status;
+	return nfs4_call_sync(server, &msg, &args, &res, 0);
 }
 
 static int nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle,
@@ -4100,15 +4093,23 @@ nfs4_proc_lock(struct file *filp, int cmd, struct file_lock *request)
 	if (request->fl_start < 0 || request->fl_end < 0)
 		return -EINVAL;
 
-	if (IS_GETLK(cmd))
-		return nfs4_proc_getlk(state, F_GETLK, request);
+	if (IS_GETLK(cmd)) {
+		if (state != NULL)
+			return nfs4_proc_getlk(state, F_GETLK, request);
+		return 0;
+	}
 
 	if (!(IS_SETLK(cmd) || IS_SETLKW(cmd)))
 		return -EINVAL;
 
-	if (request->fl_type == F_UNLCK)
-		return nfs4_proc_unlck(state, cmd, request);
+	if (request->fl_type == F_UNLCK) {
+		if (state != NULL)
+			return nfs4_proc_unlck(state, cmd, request);
+		return 0;
+	}
 
+	if (state == NULL)
+		return -ENOLCK;
 	do {
 		status = nfs4_proc_setlk(state, cmd, request);
 		if ((status != -EAGAIN) || IS_SETLK(cmd))
@@ -4794,6 +4795,22 @@ int nfs4_proc_destroy_session(struct nfs4_session *session)
 	return status;
 }
 
+int nfs4_init_session(struct nfs_server *server)
+{
+	struct nfs_client *clp = server->nfs_client;
+	int ret;
+
+	if (!nfs4_has_session(clp))
+		return 0;
+
+	clp->cl_session->fc_attrs.max_rqst_sz = server->wsize;
+	clp->cl_session->fc_attrs.max_resp_sz = server->rsize;
+	ret = nfs4_recover_expired_lease(server);
+	if (!ret)
+		ret = nfs4_check_client_ready(clp);
+	return ret;
+}
+
 /*
  * Renew the cl_session lease.
  */
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index b73c5a72865..1434080aefe 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -553,6 +553,7 @@ static struct nfs4_lock_state *nfs4_alloc_lock_state(struct nfs4_state *state, f
 	INIT_LIST_HEAD(&lsp->ls_sequence.list);
 	lsp->ls_seqid.sequence = &lsp->ls_sequence;
 	atomic_set(&lsp->ls_count, 1);
+	lsp->ls_state = state;
 	lsp->ls_owner = fl_owner;
 	spin_lock(&clp->cl_lock);
 	nfs_alloc_unique_id(&clp->cl_lockowner_id, &lsp->ls_id, 1, 64);
@@ -587,7 +588,6 @@ static struct nfs4_lock_state *nfs4_get_lock_state(struct nfs4_state *state, fl_
 		if (lsp != NULL)
 			break;
 		if (new != NULL) {
-			new->ls_state = state;
 			list_add(&new->ls_locks, &state->lock_states);
 			set_bit(LK_STATE_IN_USE, &state->flags);
 			lsp = new;
@@ -1250,8 +1250,8 @@ static void nfs4_state_manager(struct nfs_client *clp)
 				continue;
 		}
 		/* Initialize or reset the session */
-		if (nfs4_has_session(clp) &&
-		   test_and_clear_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state)) {
+		if (test_and_clear_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state)
+		   && nfs4_has_session(clp)) {
 			if (clp->cl_cons_state == NFS_CS_SESSION_INITING)
 				status = nfs4_initialize_session(clp);
 			else
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 96c4ebfa46f..12c9e66d3f1 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -18,7 +18,6 @@
 #include <linux/sunrpc/clnt.h>
 #include <linux/nfs_fs.h>
 #include <linux/nfs_page.h>
-#include <linux/smp_lock.h>
 
 #include <asm/system.h>
 
@@ -61,17 +60,15 @@ struct nfs_read_data *nfs_readdata_alloc(unsigned int pagecount)
 	return p;
 }
 
-static void nfs_readdata_free(struct nfs_read_data *p)
+void nfs_readdata_free(struct nfs_read_data *p)
 {
 	if (p && (p->pagevec != &p->page_array[0]))
 		kfree(p->pagevec);
 	mempool_free(p, nfs_rdata_mempool);
 }
 
-void nfs_readdata_release(void *data)
+static void nfs_readdata_release(struct nfs_read_data *rdata)
 {
-	struct nfs_read_data *rdata = data;
-
 	put_nfs_open_context(rdata->args.context);
 	nfs_readdata_free(rdata);
 }
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index ce728829f79..a34fae21fe1 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -87,17 +87,15 @@ struct nfs_write_data *nfs_writedata_alloc(unsigned int pagecount)
 	return p;
 }
 
-static void nfs_writedata_free(struct nfs_write_data *p)
+void nfs_writedata_free(struct nfs_write_data *p)
 {
 	if (p && (p->pagevec != &p->page_array[0]))
 		kfree(p->pagevec);
 	mempool_free(p, nfs_wdata_mempool);
 }
 
-void nfs_writedata_release(void *data)
+static void nfs_writedata_release(struct nfs_write_data *wdata)
 {
-	struct nfs_write_data *wdata = data;
-
 	put_nfs_open_context(wdata->args.context);
 	nfs_writedata_free(wdata);
 }
@@ -202,8 +200,10 @@ static int nfs_set_page_writeback(struct page *page)
 		struct nfs_server *nfss = NFS_SERVER(inode);
 
 		if (atomic_long_inc_return(&nfss->writeback) >
-				NFS_CONGESTION_ON_THRESH)
-			set_bdi_congested(&nfss->backing_dev_info, WRITE);
+				NFS_CONGESTION_ON_THRESH) {
+			set_bdi_congested(&nfss->backing_dev_info,
+						BLK_RW_ASYNC);
+		}
 	}
 	return ret;
 }
@@ -215,7 +215,7 @@ static void nfs_end_page_writeback(struct page *page)
 
 	end_page_writeback(page);
 	if (atomic_long_dec_return(&nfss->writeback) < NFS_CONGESTION_OFF_THRESH)
-		clear_bdi_congested(&nfss->backing_dev_info, WRITE);
+		clear_bdi_congested(&nfss->backing_dev_info, BLK_RW_ASYNC);
 }
 
 /*
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 1250fb978ac..6d0847562d8 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -25,7 +25,6 @@
 #include <linux/init.h>
 #include <linux/inet.h>
 #include <linux/string.h>
-#include <linux/smp_lock.h>
 #include <linux/ctype.h>
 
 #include <linux/nfs.h>
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index d4c9884cd54..492c79b7800 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -18,7 +18,6 @@
 #include <linux/unistd.h>
 #include <linux/slab.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/freezer.h>
 #include <linux/fs_struct.h>
 #include <linux/kthread.h>
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 4145083dcf8..23341c1063b 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -678,7 +678,6 @@ __be32
 nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, int type,
 			int access, struct file **filp)
 {
-	const struct cred *cred = current_cred();
 	struct dentry	*dentry;
 	struct inode	*inode;
 	int		flags = O_RDONLY|O_LARGEFILE;
@@ -733,7 +732,7 @@ nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, int type,
 		vfs_dq_init(inode);
 	}
 	*filp = dentry_open(dget(dentry), mntget(fhp->fh_export->ex_path.mnt),
-			    flags, cred);
+			    flags, current_cred());
 	if (IS_ERR(*filp))
 		host_err = PTR_ERR(*filp);
 	else
diff --git a/fs/nilfs2/Kconfig b/fs/nilfs2/Kconfig
new file mode 100644
index 00000000000..72da095d400
--- /dev/null
+++ b/fs/nilfs2/Kconfig
@@ -0,0 +1,25 @@
+config NILFS2_FS
+	tristate "NILFS2 file system support (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	select CRC32
+	help
+	  NILFS2 is a log-structured file system (LFS) supporting continuous
+	  snapshotting.  In addition to versioning capability of the entire
+	  file system, users can even restore files mistakenly overwritten or
+	  destroyed just a few seconds ago.  Since this file system can keep
+	  consistency like conventional LFS, it achieves quick recovery after
+	  system crashes.
+
+	  NILFS2 creates a number of checkpoints every few seconds or per
+	  synchronous write basis (unless there is no change).  Users can
+	  select significant versions among continuously created checkpoints,
+	  and can change them into snapshots which will be preserved for long
+	  periods until they are changed back to checkpoints.  Each
+	  snapshot is mountable as a read-only file system concurrently with
+	  its writable mount, and this feature is convenient for online backup.
+
+	  Some features including atime, extended attributes, and POSIX ACLs,
+	  are not supported yet.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called nilfs2.  If unsure, say N.
diff --git a/fs/nilfs2/bmap.c b/fs/nilfs2/bmap.c
index 36df60b6d8a..99d58a028b9 100644
--- a/fs/nilfs2/bmap.c
+++ b/fs/nilfs2/bmap.c
@@ -568,6 +568,7 @@ void nilfs_bmap_abort_update_v(struct nilfs_bmap *bmap,
 }
 
 static struct lock_class_key nilfs_bmap_dat_lock_key;
+static struct lock_class_key nilfs_bmap_mdt_lock_key;
 
 /**
  * nilfs_bmap_read - read a bmap from an inode
@@ -603,7 +604,11 @@ int nilfs_bmap_read(struct nilfs_bmap *bmap, struct nilfs_inode *raw_inode)
 		bmap->b_ptr_type = NILFS_BMAP_PTR_VS;
 		bmap->b_last_allocated_key = 0;
 		bmap->b_last_allocated_ptr = NILFS_BMAP_INVALID_PTR;
+		lockdep_set_class(&bmap->b_sem, &nilfs_bmap_mdt_lock_key);
 		break;
+	case NILFS_IFILE_INO:
+		lockdep_set_class(&bmap->b_sem, &nilfs_bmap_mdt_lock_key);
+		/* Fall through */
 	default:
 		bmap->b_ptr_type = NILFS_BMAP_PTR_VM;
 		bmap->b_last_allocated_key = 0;
diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c
index 7e0b61be212..c668bca579c 100644
--- a/fs/nilfs2/btnode.c
+++ b/fs/nilfs2/btnode.c
@@ -209,6 +209,7 @@ int nilfs_btnode_prepare_change_key(struct address_space *btnc,
 		 * We cannot call radix_tree_preload for the kernels older
 		 * than 2.6.23, because it is not exported for modules.
 		 */
+retry:
 		err = radix_tree_preload(GFP_NOFS & ~__GFP_HIGHMEM);
 		if (err)
 			goto failed_unlock;
@@ -219,7 +220,6 @@ int nilfs_btnode_prepare_change_key(struct address_space *btnc,
 				       (unsigned long long)oldkey,
 				       (unsigned long long)newkey);
 
-retry:
 		spin_lock_irq(&btnc->tree_lock);
 		err = radix_tree_insert(&btnc->page_tree, newkey, obh->b_page);
 		spin_unlock_irq(&btnc->tree_lock);
diff --git a/fs/nilfs2/cpfile.c b/fs/nilfs2/cpfile.c
index 7d49813f66d..aec942cf79e 100644
--- a/fs/nilfs2/cpfile.c
+++ b/fs/nilfs2/cpfile.c
@@ -307,7 +307,7 @@ int nilfs_cpfile_delete_checkpoints(struct inode *cpfile,
 		ret = nilfs_cpfile_get_checkpoint_block(cpfile, cno, 0, &cp_bh);
 		if (ret < 0) {
 			if (ret != -ENOENT)
-				goto out_header;
+				break;
 			/* skip hole */
 			ret = 0;
 			continue;
@@ -340,7 +340,7 @@ int nilfs_cpfile_delete_checkpoints(struct inode *cpfile,
 					continue;
 				printk(KERN_ERR "%s: cannot delete block\n",
 				       __func__);
-				goto out_header;
+				break;
 			}
 		}
 
@@ -358,7 +358,6 @@ int nilfs_cpfile_delete_checkpoints(struct inode *cpfile,
 		kunmap_atomic(kaddr, KM_USER0);
 	}
 
- out_header:
 	brelse(header_bh);
 
  out_sem:
diff --git a/fs/nilfs2/dat.c b/fs/nilfs2/dat.c
index 0b2710e2d56..8927ca27e6f 100644
--- a/fs/nilfs2/dat.c
+++ b/fs/nilfs2/dat.c
@@ -134,15 +134,6 @@ void nilfs_dat_commit_start(struct inode *dat, struct nilfs_palloc_req *req,
 	entry = nilfs_palloc_block_get_entry(dat, req->pr_entry_nr,
 					     req->pr_entry_bh, kaddr);
 	entry->de_start = cpu_to_le64(nilfs_mdt_cno(dat));
-	if (entry->de_blocknr != cpu_to_le64(0) ||
-	    entry->de_end != cpu_to_le64(NILFS_CNO_MAX)) {
-		printk(KERN_CRIT
-		       "%s: vbn = %llu, start = %llu, end = %llu, pbn = %llu\n",
-		       __func__, (unsigned long long)req->pr_entry_nr,
-		       (unsigned long long)le64_to_cpu(entry->de_start),
-		       (unsigned long long)le64_to_cpu(entry->de_end),
-		       (unsigned long long)le64_to_cpu(entry->de_blocknr));
-	}
 	entry->de_blocknr = cpu_to_le64(blocknr);
 	kunmap_atomic(kaddr, KM_USER0);
 
diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c
index 54100acc110..1a4fa04cf07 100644
--- a/fs/nilfs2/dir.c
+++ b/fs/nilfs2/dir.c
@@ -43,7 +43,6 @@
  */
 
 #include <linux/pagemap.h>
-#include <linux/smp_lock.h>
 #include "nilfs.h"
 #include "page.h"
 
diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index 3d3ddb3f517..2dfd47714ae 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -412,8 +412,10 @@ nilfs_mdt_write_page(struct page *page, struct writeback_control *wbc)
 		return 0; /* Do not request flush for shadow page cache */
 	if (!sb) {
 		writer = nilfs_get_writer(NILFS_MDT(inode)->mi_nilfs);
-		if (!writer)
+		if (!writer) {
+			nilfs_put_writer(NILFS_MDT(inode)->mi_nilfs);
 			return -EROFS;
+		}
 		sb = writer->s_super;
 	}
 
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index aa977549919..51ff3d0a4ee 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -1829,26 +1829,13 @@ static int nilfs_segctor_write(struct nilfs_sc_info *sci,
 		err = nilfs_segbuf_write(segbuf, &wi);
 
 		res = nilfs_segbuf_wait(segbuf, &wi);
-		err = unlikely(err) ? : res;
-		if (unlikely(err))
+		err = err ? : res;
+		if (err)
 			return err;
 	}
 	return 0;
 }
 
-static int nilfs_page_has_uncleared_buffer(struct page *page)
-{
-	struct buffer_head *head, *bh;
-
-	head = bh = page_buffers(page);
-	do {
-		if (buffer_dirty(bh) && !list_empty(&bh->b_assoc_buffers))
-			return 1;
-		bh = bh->b_this_page;
-	} while (bh != head);
-	return 0;
-}
-
 static void __nilfs_end_page_io(struct page *page, int err)
 {
 	if (!err) {
@@ -1872,13 +1859,26 @@ static void nilfs_end_page_io(struct page *page, int err)
 	if (!page)
 		return;
 
-	if (buffer_nilfs_node(page_buffers(page)) &&
-	    nilfs_page_has_uncleared_buffer(page))
-		/* For b-tree node pages, this function may be called twice
-		   or more because they might be split in a segment.
-		   This check assures that cleanup has been done for all
-		   buffers in a split btnode page. */
+	if (buffer_nilfs_node(page_buffers(page)) && !PageWriteback(page)) {
+		/*
+		 * For b-tree node pages, this function may be called twice
+		 * or more because they might be split in a segment.
+		 */
+		if (PageDirty(page)) {
+			/*
+			 * For pages holding split b-tree node buffers, dirty
+			 * flag on the buffers may be cleared discretely.
+			 * In that case, the page is once redirtied for
+			 * remaining buffers, and it must be cancelled if
+			 * all the buffers get cleaned later.
+			 */
+			lock_page(page);
+			if (nilfs_page_buffers_clean(page))
+				__nilfs_clear_page_dirty(page);
+			unlock_page(page);
+		}
 		return;
+	}
 
 	__nilfs_end_page_io(page, err);
 }
@@ -1940,7 +1940,7 @@ static void nilfs_segctor_abort_write(struct nilfs_sc_info *sci,
 			}
 			if (bh->b_page != fs_page) {
 				nilfs_end_page_io(fs_page, err);
-				if (unlikely(fs_page == failed_page))
+				if (fs_page && fs_page == failed_page)
 					goto done;
 				fs_page = bh->b_page;
 			}
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 8e2ec43b18f..151964f0de4 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -416,8 +416,10 @@ int nilfs_attach_checkpoint(struct nilfs_sb_info *sbi, __u64 cno)
 	if (unlikely(err))
 		goto failed;
 
+	down_read(&nilfs->ns_segctor_sem);
 	err = nilfs_cpfile_get_checkpoint(nilfs->ns_cpfile, cno, 0, &raw_cp,
 					  &bh_cp);
+	up_read(&nilfs->ns_segctor_sem);
 	if (unlikely(err)) {
 		if (err == -ENOENT || err == -EINVAL) {
 			printk(KERN_ERR
diff --git a/fs/nilfs2/the_nilfs.h b/fs/nilfs2/the_nilfs.h
index e8adbffc626..1b9caafb866 100644
--- a/fs/nilfs2/the_nilfs.h
+++ b/fs/nilfs2/the_nilfs.h
@@ -253,7 +253,7 @@ nilfs_detach_writer(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi)
 
 static inline void nilfs_put_sbinfo(struct nilfs_sb_info *sbi)
 {
-	if (!atomic_dec_and_test(&sbi->s_count))
+	if (atomic_dec_and_test(&sbi->s_count))
 		kfree(sbi);
 }
 
diff --git a/fs/notify/Kconfig b/fs/notify/Kconfig
index 31dac7e3b0f..dffbb0911d0 100644
--- a/fs/notify/Kconfig
+++ b/fs/notify/Kconfig
@@ -1,15 +1,5 @@
 config FSNOTIFY
-	bool "Filesystem notification backend"
-	default y
-	---help---
-	   fsnotify is a backend for filesystem notification.  fsnotify does
-	   not provide any userspace interface but does provide the basis
-	   needed for other notification schemes such as dnotify, inotify,
-	   and fanotify.
-
-	   Say Y here to enable fsnotify suport.
-
-	   If unsure, say Y.
+	def_bool n
 
 source "fs/notify/dnotify/Kconfig"
 source "fs/notify/inotify/Kconfig"
diff --git a/fs/notify/dnotify/Kconfig b/fs/notify/dnotify/Kconfig
index 904ff8d5405..f9c1ca139d8 100644
--- a/fs/notify/dnotify/Kconfig
+++ b/fs/notify/dnotify/Kconfig
@@ -1,6 +1,6 @@
 config DNOTIFY
 	bool "Dnotify support"
-	depends on FSNOTIFY
+	select FSNOTIFY
 	default y
 	help
 	  Dnotify is a directory-based per-fd file change notification system
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index ec2f7bd7681..037e878e03f 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -159,7 +159,9 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const
 			if (!group->ops->should_send_event(group, to_tell, mask))
 				continue;
 			if (!event) {
-				event = fsnotify_create_event(to_tell, mask, data, data_is, file_name, cookie);
+				event = fsnotify_create_event(to_tell, mask, data,
+							      data_is, file_name, cookie,
+							      GFP_KERNEL);
 				/* shit, we OOM'd and now we can't tell, maybe
 				 * someday someone else will want to do something
 				 * here */
diff --git a/fs/notify/inotify/Kconfig b/fs/notify/inotify/Kconfig
index 5356884289a..3e56dbffe72 100644
--- a/fs/notify/inotify/Kconfig
+++ b/fs/notify/inotify/Kconfig
@@ -15,7 +15,7 @@ config INOTIFY
 
 config INOTIFY_USER
 	bool "Inotify support for userspace"
-	depends on FSNOTIFY
+	select FSNOTIFY
 	default y
 	---help---
 	  Say Y here to enable inotify support for userspace, including the
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 47cd258fd24..c9ee67b442e 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -62,13 +62,14 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev
 	event_priv->wd = wd;
 
 	ret = fsnotify_add_notify_event(group, event, fsn_event_priv);
-	/* EEXIST is not an error */
-	if (ret == -EEXIST)
-		ret = 0;
-
-	/* did event_priv get attached? */
-	if (list_empty(&fsn_event_priv->event_list))
+	if (ret) {
 		inotify_free_event_priv(fsn_event_priv);
+		/* EEXIST says we tail matched, EOVERFLOW isn't something
+		 * to report up the stack. */
+		if ((ret == -EEXIST) ||
+		    (ret == -EOVERFLOW))
+			ret = 0;
+	}
 
 	/*
 	 * If we hold the entry until after the event is on the queue
@@ -104,16 +105,45 @@ static bool inotify_should_send_event(struct fsnotify_group *group, struct inode
 	return send;
 }
 
+/*
+ * This is NEVER supposed to be called.  Inotify marks should either have been
+ * removed from the idr when the watch was removed or in the
+ * fsnotify_destroy_mark_by_group() call when the inotify instance was being
+ * torn down.  This is only called if the idr is about to be freed but there
+ * are still marks in it.
+ */
 static int idr_callback(int id, void *p, void *data)
 {
-	BUG();
+	struct fsnotify_mark_entry *entry;
+	struct inotify_inode_mark_entry *ientry;
+	static bool warned = false;
+
+	if (warned)
+		return 0;
+
+	warned = false;
+	entry = p;
+	ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+
+	WARN(1, "inotify closing but id=%d for entry=%p in group=%p still in "
+		"idr.  Probably leaking memory\n", id, p, data);
+
+	/*
+	 * I'm taking the liberty of assuming that the mark in question is a
+	 * valid address and I'm dereferencing it.  This might help to figure
+	 * out why we got here and the panic is no worse than the original
+	 * BUG() that was here.
+	 */
+	if (entry)
+		printk(KERN_WARNING "entry->group=%p inode=%p wd=%d\n",
+			entry->group, entry->inode, ientry->wd);
 	return 0;
 }
 
 static void inotify_free_group_priv(struct fsnotify_group *group)
 {
 	/* ideally the idr is empty and we won't hit the BUG in teh callback */
-	idr_for_each(&group->inotify_data.idr, idr_callback, NULL);
+	idr_for_each(&group->inotify_data.idr, idr_callback, group);
 	idr_remove_all(&group->inotify_data.idr);
 	idr_destroy(&group->inotify_data.idr);
 }
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index ff231ad2389..dcd2040d330 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -47,9 +47,6 @@
 
 static struct vfsmount *inotify_mnt __read_mostly;
 
-/* this just sits here and wastes global memory.  used to just pad userspace messages with zeros */
-static struct inotify_event nul_inotify_event;
-
 /* these are configurable via /proc/sys/fs/inotify/ */
 static int inotify_max_user_instances __read_mostly;
 static int inotify_max_queued_events __read_mostly;
@@ -57,7 +54,6 @@ int inotify_max_user_watches __read_mostly;
 
 static struct kmem_cache *inotify_inode_mark_cachep __read_mostly;
 struct kmem_cache *event_priv_cachep __read_mostly;
-static struct fsnotify_event *inotify_ignored_event;
 
 /*
  * When inotify registers a new group it increments this and uses that
@@ -158,7 +154,8 @@ static struct fsnotify_event *get_one_event(struct fsnotify_group *group,
 
 	event = fsnotify_peek_notify_event(group);
 
-	event_size += roundup(event->name_len, event_size);
+	if (event->name_len)
+		event_size += roundup(event->name_len + 1, event_size);
 
 	if (event_size > count)
 		return ERR_PTR(-EINVAL);
@@ -184,7 +181,7 @@ static ssize_t copy_event_to_user(struct fsnotify_group *group,
 	struct fsnotify_event_private_data *fsn_priv;
 	struct inotify_event_private_data *priv;
 	size_t event_size = sizeof(struct inotify_event);
-	size_t name_len;
+	size_t name_len = 0;
 
 	/* we get the inotify watch descriptor from the event private data */
 	spin_lock(&event->lock);
@@ -200,8 +197,12 @@ static ssize_t copy_event_to_user(struct fsnotify_group *group,
 		inotify_free_event_priv(fsn_priv);
 	}
 
-	/* round up event->name_len so it is a multiple of event_size */
-	name_len = roundup(event->name_len, event_size);
+	/*
+	 * round up event->name_len so it is a multiple of event_size
+	 * plus an extra byte for the terminating '\0'.
+	 */
+	if (event->name_len)
+		name_len = roundup(event->name_len + 1, event_size);
 	inotify_event.len = name_len;
 
 	inotify_event.mask = inotify_mask_to_arg(event->mask);
@@ -225,8 +226,8 @@ static ssize_t copy_event_to_user(struct fsnotify_group *group,
 			return -EFAULT;
 		buf += event->name_len;
 
-		/* fill userspace with 0's from nul_inotify_event */
-		if (copy_to_user(buf, &nul_inotify_event, len_to_zero))
+		/* fill userspace with 0's */
+		if (clear_user(buf, len_to_zero))
 			return -EFAULT;
 		buf += len_to_zero;
 		event_size += name_len;
@@ -296,12 +297,15 @@ static int inotify_fasync(int fd, struct file *file, int on)
 static int inotify_release(struct inode *ignored, struct file *file)
 {
 	struct fsnotify_group *group = file->private_data;
+	struct user_struct *user = group->inotify_data.user;
 
 	fsnotify_clear_marks_by_group(group);
 
 	/* free this group, matching get was inotify_init->fsnotify_obtain_group */
 	fsnotify_put_group(group);
 
+	atomic_dec(&user->inotify_devs);
+
 	return 0;
 }
 
@@ -324,8 +328,9 @@ static long inotify_ioctl(struct file *file, unsigned int cmd,
 		list_for_each_entry(holder, &group->notification_list, event_list) {
 			event = holder->event;
 			send_len += sizeof(struct inotify_event);
-			send_len += roundup(event->name_len,
-					     sizeof(struct inotify_event));
+			if (event->name_len)
+				send_len += roundup(event->name_len + 1,
+						sizeof(struct inotify_event));
 		}
 		mutex_unlock(&group->notification_mutex);
 		ret = put_user(send_len, (int __user *) p);
@@ -363,20 +368,71 @@ static int inotify_find_inode(const char __user *dirname, struct path *path, uns
 }
 
 /*
- * Send IN_IGNORED for this wd, remove this wd from the idr, and drop the
- * internal reference help on the mark because it is in the idr.
+ * Remove the mark from the idr (if present) and drop the reference
+ * on the mark because it was in the idr.
+ */
+static void inotify_remove_from_idr(struct fsnotify_group *group,
+				    struct inotify_inode_mark_entry *ientry)
+{
+	struct idr *idr;
+	struct fsnotify_mark_entry *entry;
+	struct inotify_inode_mark_entry *found_ientry;
+	int wd;
+
+	spin_lock(&group->inotify_data.idr_lock);
+	idr = &group->inotify_data.idr;
+	wd = ientry->wd;
+
+	if (wd == -1)
+		goto out;
+
+	entry = idr_find(&group->inotify_data.idr, wd);
+	if (unlikely(!entry))
+		goto out;
+
+	found_ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+	if (unlikely(found_ientry != ientry)) {
+		/* We found an entry in the idr with the right wd, but it's
+		 * not the entry we were told to remove.  eparis seriously
+		 * fucked up somewhere. */
+		WARN_ON(1);
+		ientry->wd = -1;
+		goto out;
+	}
+
+	/* One ref for being in the idr, one ref held by the caller */
+	BUG_ON(atomic_read(&entry->refcnt) < 2);
+
+	idr_remove(idr, wd);
+	ientry->wd = -1;
+
+	/* removed from the idr, drop that ref */
+	fsnotify_put_mark(entry);
+out:
+	spin_unlock(&group->inotify_data.idr_lock);
+}
+
+/*
+ * Send IN_IGNORED for this wd, remove this wd from the idr.
  */
 void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
 				    struct fsnotify_group *group)
 {
 	struct inotify_inode_mark_entry *ientry;
+	struct fsnotify_event *ignored_event;
 	struct inotify_event_private_data *event_priv;
 	struct fsnotify_event_private_data *fsn_event_priv;
-	struct idr *idr;
+	int ret;
+
+	ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL,
+					      FSNOTIFY_EVENT_NONE, NULL, 0,
+					      GFP_NOFS);
+	if (!ignored_event)
+		return;
 
 	ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
 
-	event_priv = kmem_cache_alloc(event_priv_cachep, GFP_KERNEL);
+	event_priv = kmem_cache_alloc(event_priv_cachep, GFP_NOFS);
 	if (unlikely(!event_priv))
 		goto skip_send_ignore;
 
@@ -385,22 +441,19 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
 	fsn_event_priv->group = group;
 	event_priv->wd = ientry->wd;
 
-	fsnotify_add_notify_event(group, inotify_ignored_event, fsn_event_priv);
-
-	/* did the private data get added? */
-	if (list_empty(&fsn_event_priv->event_list))
+	ret = fsnotify_add_notify_event(group, ignored_event, fsn_event_priv);
+	if (ret)
 		inotify_free_event_priv(fsn_event_priv);
 
 skip_send_ignore:
 
+	/* matches the reference taken when the event was created */
+	fsnotify_put_event(ignored_event);
+
 	/* remove this entry from the idr */
-	spin_lock(&group->inotify_data.idr_lock);
-	idr = &group->inotify_data.idr;
-	idr_remove(idr, ientry->wd);
-	spin_unlock(&group->inotify_data.idr_lock);
+	inotify_remove_from_idr(group, ientry);
 
-	/* removed from idr, drop that reference */
-	fsnotify_put_mark(entry);
+	atomic_dec(&group->inotify_data.user->inotify_watches);
 }
 
 /* ding dong the mark is dead */
@@ -411,67 +464,29 @@ static void inotify_free_mark(struct fsnotify_mark_entry *entry)
 	kmem_cache_free(inotify_inode_mark_cachep, ientry);
 }
 
-static int inotify_update_watch(struct fsnotify_group *group, struct inode *inode, u32 arg)
+static int inotify_update_existing_watch(struct fsnotify_group *group,
+					 struct inode *inode,
+					 u32 arg)
 {
-	struct fsnotify_mark_entry *entry = NULL;
+	struct fsnotify_mark_entry *entry;
 	struct inotify_inode_mark_entry *ientry;
-	int ret = 0;
-	int add = (arg & IN_MASK_ADD);
-	__u32 mask;
 	__u32 old_mask, new_mask;
+	__u32 mask;
+	int add = (arg & IN_MASK_ADD);
+	int ret;
 
 	/* don't allow invalid bits: we don't want flags set */
 	mask = inotify_arg_to_mask(arg);
 	if (unlikely(!mask))
 		return -EINVAL;
 
-	ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
-	if (unlikely(!ientry))
-		return -ENOMEM;
-	/* we set the mask at the end after attaching it */
-	fsnotify_init_mark(&ientry->fsn_entry, inotify_free_mark);
-	ientry->wd = 0;
-
-find_entry:
 	spin_lock(&inode->i_lock);
 	entry = fsnotify_find_mark_entry(group, inode);
 	spin_unlock(&inode->i_lock);
-	if (entry) {
-		kmem_cache_free(inotify_inode_mark_cachep, ientry);
-		ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
-	} else {
-		if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches) {
-			ret = -ENOSPC;
-			goto out_err;
-		}
+	if (!entry)
+		return -ENOENT;
 
-		ret = fsnotify_add_mark(&ientry->fsn_entry, group, inode);
-		if (ret == -EEXIST)
-			goto find_entry;
-		else if (ret)
-			goto out_err;
-
-		entry = &ientry->fsn_entry;
-retry:
-		ret = -ENOMEM;
-		if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
-			goto out_err;
-
-		spin_lock(&group->inotify_data.idr_lock);
-		/* if entry is added to the idr we keep the reference obtained
-		 * through fsnotify_mark_add.  remember to drop this reference
-		 * when entry is removed from idr */
-		ret = idr_get_new_above(&group->inotify_data.idr, entry,
-					++group->inotify_data.last_wd,
-					&ientry->wd);
-		spin_unlock(&group->inotify_data.idr_lock);
-		if (ret) {
-			if (ret == -EAGAIN)
-				goto retry;
-			goto out_err;
-		}
-		atomic_inc(&group->inotify_data.user->inotify_watches);
-	}
+	ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
 
 	spin_lock(&entry->lock);
 
@@ -503,14 +518,108 @@ retry:
 			fsnotify_recalc_group_mask(group);
 	}
 
-	return ientry->wd;
+	/* return the wd */
+	ret = ientry->wd;
 
-out_err:
-	/* see this isn't supposed to happen, just kill the watch */
-	if (entry) {
-		fsnotify_destroy_mark_by_entry(entry);
-		fsnotify_put_mark(entry);
+	/* match the get from fsnotify_find_mark_entry() */
+	fsnotify_put_mark(entry);
+
+	return ret;
+}
+
+static int inotify_new_watch(struct fsnotify_group *group,
+			     struct inode *inode,
+			     u32 arg)
+{
+	struct inotify_inode_mark_entry *tmp_ientry;
+	__u32 mask;
+	int ret;
+
+	/* don't allow invalid bits: we don't want flags set */
+	mask = inotify_arg_to_mask(arg);
+	if (unlikely(!mask))
+		return -EINVAL;
+
+	tmp_ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
+	if (unlikely(!tmp_ientry))
+		return -ENOMEM;
+
+	fsnotify_init_mark(&tmp_ientry->fsn_entry, inotify_free_mark);
+	tmp_ientry->fsn_entry.mask = mask;
+	tmp_ientry->wd = -1;
+
+	ret = -ENOSPC;
+	if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches)
+		goto out_err;
+retry:
+	ret = -ENOMEM;
+	if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
+		goto out_err;
+
+	spin_lock(&group->inotify_data.idr_lock);
+	ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
+				group->inotify_data.last_wd,
+				&tmp_ientry->wd);
+	spin_unlock(&group->inotify_data.idr_lock);
+	if (ret) {
+		/* idr was out of memory allocate and try again */
+		if (ret == -EAGAIN)
+			goto retry;
+		goto out_err;
 	}
+
+	/* we put the mark on the idr, take a reference */
+	fsnotify_get_mark(&tmp_ientry->fsn_entry);
+
+	/* we are on the idr, now get on the inode */
+	ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode);
+	if (ret) {
+		/* we failed to get on the inode, get off the idr */
+		inotify_remove_from_idr(group, tmp_ientry);
+		goto out_err;
+	}
+
+	/* update the idr hint, who cares about races, it's just a hint */
+	group->inotify_data.last_wd = tmp_ientry->wd;
+
+	/* increment the number of watches the user has */
+	atomic_inc(&group->inotify_data.user->inotify_watches);
+
+	/* return the watch descriptor for this new entry */
+	ret = tmp_ientry->wd;
+
+	/* match the ref from fsnotify_init_markentry() */
+	fsnotify_put_mark(&tmp_ientry->fsn_entry);
+
+	/* if this mark added a new event update the group mask */
+	if (mask & ~group->mask)
+		fsnotify_recalc_group_mask(group);
+
+out_err:
+	if (ret < 0)
+		kmem_cache_free(inotify_inode_mark_cachep, tmp_ientry);
+
+	return ret;
+}
+
+static int inotify_update_watch(struct fsnotify_group *group, struct inode *inode, u32 arg)
+{
+	int ret = 0;
+
+retry:
+	/* try to update and existing watch with the new arg */
+	ret = inotify_update_existing_watch(group, inode, arg);
+	/* no mark present, try to add a new one */
+	if (ret == -ENOENT)
+		ret = inotify_new_watch(group, inode, arg);
+	/*
+	 * inotify_new_watch could race with another thread which did an
+	 * inotify_new_watch between the update_existing and the add watch
+	 * here, go back and try to update an existing mark again.
+	 */
+	if (ret == -EEXIST)
+		goto retry;
+
 	return ret;
 }
 
@@ -529,7 +638,7 @@ static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsign
 
 	spin_lock_init(&group->inotify_data.idr_lock);
 	idr_init(&group->inotify_data.idr);
-	group->inotify_data.last_wd = 0;
+	group->inotify_data.last_wd = 1;
 	group->inotify_data.user = user;
 	group->inotify_data.fa = NULL;
 
@@ -718,9 +827,6 @@ static int __init inotify_user_setup(void)
 
 	inotify_inode_mark_cachep = KMEM_CACHE(inotify_inode_mark_entry, SLAB_PANIC);
 	event_priv_cachep = KMEM_CACHE(inotify_event_private_data, SLAB_PANIC);
-	inotify_ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL, FSNOTIFY_EVENT_NONE, NULL, 0);
-	if (!inotify_ignored_event)
-		panic("unable to allocate the inotify ignored event\n");
 
 	inotify_max_queued_events = 16384;
 	inotify_max_user_instances = 128;
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index 959b73e756f..3816d5750dd 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -136,18 +136,28 @@ static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new
 {
 	if ((old->mask == new->mask) &&
 	    (old->to_tell == new->to_tell) &&
-	    (old->data_type == new->data_type)) {
+	    (old->data_type == new->data_type) &&
+	    (old->name_len == new->name_len)) {
 		switch (old->data_type) {
 		case (FSNOTIFY_EVENT_INODE):
-			if (old->inode == new->inode)
+			/* remember, after old was put on the wait_q we aren't
+			 * allowed to look at the inode any more, only thing
+			 * left to check was if the file_name is the same */
+			if (old->name_len &&
+			    !strcmp(old->file_name, new->file_name))
 				return true;
 			break;
 		case (FSNOTIFY_EVENT_PATH):
 			if ((old->path.mnt == new->path.mnt) &&
 			    (old->path.dentry == new->path.dentry))
 				return true;
+			break;
 		case (FSNOTIFY_EVENT_NONE):
-			return true;
+			if (old->mask & FS_Q_OVERFLOW)
+				return true;
+			else if (old->mask & FS_IN_IGNORED)
+				return false;
+			return false;
 		};
 	}
 	return false;
@@ -165,9 +175,7 @@ int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_even
 	struct list_head *list = &group->notification_list;
 	struct fsnotify_event_holder *last_holder;
 	struct fsnotify_event *last_event;
-
-	/* easy to tell if priv was attached to the event */
-	INIT_LIST_HEAD(&priv->event_list);
+	int ret = 0;
 
 	/*
 	 * There is one fsnotify_event_holder embedded inside each fsnotify_event.
@@ -188,6 +196,7 @@ alloc_holder:
 
 	if (group->q_len >= group->max_events) {
 		event = &q_overflow_event;
+		ret = -EOVERFLOW;
 		/* sorry, no private data on the overflow event */
 		priv = NULL;
 	}
@@ -229,7 +238,7 @@ alloc_holder:
 	mutex_unlock(&group->notification_mutex);
 
 	wake_up(&group->notification_waitq);
-	return 0;
+	return ret;
 }
 
 /*
@@ -339,18 +348,19 @@ static void initialize_event(struct fsnotify_event *event)
  * @name the filename, if available
  */
 struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, void *data,
-					     int data_type, const char *name, u32 cookie)
+					     int data_type, const char *name, u32 cookie,
+					     gfp_t gfp)
 {
 	struct fsnotify_event *event;
 
-	event = kmem_cache_alloc(fsnotify_event_cachep, GFP_KERNEL);
+	event = kmem_cache_alloc(fsnotify_event_cachep, gfp);
 	if (!event)
 		return NULL;
 
 	initialize_event(event);
 
 	if (name) {
-		event->file_name = kstrdup(name, GFP_KERNEL);
+		event->file_name = kstrdup(name, gfp);
 		if (!event->file_name) {
 			kmem_cache_free(fsnotify_event_cachep, event);
 			return NULL;
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 9edcde4974a..ab513ddaeff 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -1914,7 +1914,8 @@ static void ocfs2_adjust_adjacent_records(struct ocfs2_extent_rec *left_rec,
 	 * immediately to their right.
 	 */
 	left_clusters = le32_to_cpu(right_child_el->l_recs[0].e_cpos);
-	if (ocfs2_is_empty_extent(&right_child_el->l_recs[0])) {
+	if (!ocfs2_rec_clusters(right_child_el, &right_child_el->l_recs[0])) {
+		BUG_ON(right_child_el->l_tree_depth);
 		BUG_ON(le16_to_cpu(right_child_el->l_next_free_rec) <= 1);
 		left_clusters = le32_to_cpu(right_child_el->l_recs[1].e_cpos);
 	}
@@ -2476,15 +2477,37 @@ out_ret_path:
 	return ret;
 }
 
-static void ocfs2_update_edge_lengths(struct inode *inode, handle_t *handle,
-				      struct ocfs2_path *path)
+static int ocfs2_update_edge_lengths(struct inode *inode, handle_t *handle,
+				     int subtree_index, struct ocfs2_path *path)
 {
-	int i, idx;
+	int i, idx, ret;
 	struct ocfs2_extent_rec *rec;
 	struct ocfs2_extent_list *el;
 	struct ocfs2_extent_block *eb;
 	u32 range;
 
+	/*
+	 * In normal tree rotation process, we will never touch the
+	 * tree branch above subtree_index and ocfs2_extend_rotate_transaction
+	 * doesn't reserve the credits for them either.
+	 *
+	 * But we do have a special case here which will update the rightmost
+	 * records for all the bh in the path.
+	 * So we have to allocate extra credits and access them.
+	 */
+	ret = ocfs2_extend_trans(handle,
+				 handle->h_buffer_credits + subtree_index);
+	if (ret) {
+		mlog_errno(ret);
+		goto out;
+	}
+
+	ret = ocfs2_journal_access_path(inode, handle, path);
+	if (ret) {
+		mlog_errno(ret);
+		goto out;
+	}
+
 	/* Path should always be rightmost. */
 	eb = (struct ocfs2_extent_block *)path_leaf_bh(path)->b_data;
 	BUG_ON(eb->h_next_leaf_blk != 0ULL);
@@ -2505,6 +2528,8 @@ static void ocfs2_update_edge_lengths(struct inode *inode, handle_t *handle,
 
 		ocfs2_journal_dirty(handle, path->p_node[i].bh);
 	}
+out:
+	return ret;
 }
 
 static void ocfs2_unlink_path(struct inode *inode, handle_t *handle,
@@ -2717,7 +2742,12 @@ static int ocfs2_rotate_subtree_left(struct inode *inode, handle_t *handle,
 	if (del_right_subtree) {
 		ocfs2_unlink_subtree(inode, handle, left_path, right_path,
 				     subtree_index, dealloc);
-		ocfs2_update_edge_lengths(inode, handle, left_path);
+		ret = ocfs2_update_edge_lengths(inode, handle, subtree_index,
+						left_path);
+		if (ret) {
+			mlog_errno(ret);
+			goto out;
+		}
 
 		eb = (struct ocfs2_extent_block *)path_leaf_bh(left_path)->b_data;
 		ocfs2_et_set_last_eb_blk(et, le64_to_cpu(eb->h_blkno));
@@ -3034,7 +3064,12 @@ static int ocfs2_remove_rightmost_path(struct inode *inode, handle_t *handle,
 
 		ocfs2_unlink_subtree(inode, handle, left_path, path,
 				     subtree_index, dealloc);
-		ocfs2_update_edge_lengths(inode, handle, left_path);
+		ret = ocfs2_update_edge_lengths(inode, handle, subtree_index,
+						left_path);
+		if (ret) {
+			mlog_errno(ret);
+			goto out;
+		}
 
 		eb = (struct ocfs2_extent_block *)path_leaf_bh(left_path)->b_data;
 		ocfs2_et_set_last_eb_blk(et, le64_to_cpu(eb->h_blkno));
@@ -6816,7 +6851,7 @@ static int ocfs2_do_truncate(struct ocfs2_super *osb,
 	}
 	status = 0;
 bail:
-
+	brelse(last_eb_bh);
 	mlog_exit(status);
 	return status;
 }
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index b2c52b3a148..8a1e61545f4 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -193,6 +193,7 @@ static int ocfs2_get_block(struct inode *inode, sector_t iblock,
 			     (unsigned long long)OCFS2_I(inode)->ip_blkno);
 			mlog(ML_ERROR, "Size %llu, clusters %u\n", (unsigned long long)i_size_read(inode), OCFS2_I(inode)->ip_clusters);
 			dump_stack();
+			goto bail;
 		}
 
 		past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
@@ -894,18 +895,17 @@ struct ocfs2_write_cluster_desc {
 	 */
 	unsigned	c_new;
 	unsigned	c_unwritten;
+	unsigned	c_needs_zero;
 };
 
-static inline int ocfs2_should_zero_cluster(struct ocfs2_write_cluster_desc *d)
-{
-	return d->c_new || d->c_unwritten;
-}
-
 struct ocfs2_write_ctxt {
 	/* Logical cluster position / len of write */
 	u32				w_cpos;
 	u32				w_clen;
 
+	/* First cluster allocated in a nonsparse extend */
+	u32				w_first_new_cpos;
+
 	struct ocfs2_write_cluster_desc	w_desc[OCFS2_MAX_CLUSTERS_PER_PAGE];
 
 	/*
@@ -983,6 +983,7 @@ static int ocfs2_alloc_write_ctxt(struct ocfs2_write_ctxt **wcp,
 		return -ENOMEM;
 
 	wc->w_cpos = pos >> osb->s_clustersize_bits;
+	wc->w_first_new_cpos = UINT_MAX;
 	cend = (pos + len - 1) >> osb->s_clustersize_bits;
 	wc->w_clen = cend - wc->w_cpos + 1;
 	get_bh(di_bh);
@@ -1217,20 +1218,18 @@ out:
  */
 static int ocfs2_write_cluster(struct address_space *mapping,
 			       u32 phys, unsigned int unwritten,
+			       unsigned int should_zero,
 			       struct ocfs2_alloc_context *data_ac,
 			       struct ocfs2_alloc_context *meta_ac,
 			       struct ocfs2_write_ctxt *wc, u32 cpos,
 			       loff_t user_pos, unsigned user_len)
 {
-	int ret, i, new, should_zero = 0;
+	int ret, i, new;
 	u64 v_blkno, p_blkno;
 	struct inode *inode = mapping->host;
 	struct ocfs2_extent_tree et;
 
 	new = phys == 0 ? 1 : 0;
-	if (new || unwritten)
-		should_zero = 1;
-
 	if (new) {
 		u32 tmp_pos;
 
@@ -1301,7 +1300,7 @@ static int ocfs2_write_cluster(struct address_space *mapping,
 		if (tmpret) {
 			mlog_errno(tmpret);
 			if (ret == 0)
-				tmpret = ret;
+				ret = tmpret;
 		}
 	}
 
@@ -1341,7 +1340,9 @@ static int ocfs2_write_cluster_by_desc(struct address_space *mapping,
 			local_len = osb->s_clustersize - cluster_off;
 
 		ret = ocfs2_write_cluster(mapping, desc->c_phys,
-					  desc->c_unwritten, data_ac, meta_ac,
+					  desc->c_unwritten,
+					  desc->c_needs_zero,
+					  data_ac, meta_ac,
 					  wc, desc->c_cpos, pos, local_len);
 		if (ret) {
 			mlog_errno(ret);
@@ -1391,14 +1392,14 @@ static void ocfs2_set_target_boundaries(struct ocfs2_super *osb,
 		 * newly allocated cluster.
 		 */
 		desc = &wc->w_desc[0];
-		if (ocfs2_should_zero_cluster(desc))
+		if (desc->c_needs_zero)
 			ocfs2_figure_cluster_boundaries(osb,
 							desc->c_cpos,
 							&wc->w_target_from,
 							NULL);
 
 		desc = &wc->w_desc[wc->w_clen - 1];
-		if (ocfs2_should_zero_cluster(desc))
+		if (desc->c_needs_zero)
 			ocfs2_figure_cluster_boundaries(osb,
 							desc->c_cpos,
 							NULL,
@@ -1466,13 +1467,28 @@ static int ocfs2_populate_write_desc(struct inode *inode,
 			phys++;
 		}
 
+		/*
+		 * If w_first_new_cpos is < UINT_MAX, we have a non-sparse
+		 * file that got extended.  w_first_new_cpos tells us
+		 * where the newly allocated clusters are so we can
+		 * zero them.
+		 */
+		if (desc->c_cpos >= wc->w_first_new_cpos) {
+			BUG_ON(phys == 0);
+			desc->c_needs_zero = 1;
+		}
+
 		desc->c_phys = phys;
 		if (phys == 0) {
 			desc->c_new = 1;
+			desc->c_needs_zero = 1;
 			*clusters_to_alloc = *clusters_to_alloc + 1;
 		}
-		if (ext_flags & OCFS2_EXT_UNWRITTEN)
+
+		if (ext_flags & OCFS2_EXT_UNWRITTEN) {
 			desc->c_unwritten = 1;
+			desc->c_needs_zero = 1;
+		}
 
 		num_clusters--;
 	}
@@ -1632,10 +1648,13 @@ static int ocfs2_expand_nonsparse_inode(struct inode *inode, loff_t pos,
 	if (newsize <= i_size_read(inode))
 		return 0;
 
-	ret = ocfs2_extend_no_holes(inode, newsize, newsize - len);
+	ret = ocfs2_extend_no_holes(inode, newsize, pos);
 	if (ret)
 		mlog_errno(ret);
 
+	wc->w_first_new_cpos =
+		ocfs2_clusters_for_bytes(inode->i_sb, i_size_read(inode));
+
 	return ret;
 }
 
@@ -1644,7 +1663,7 @@ int ocfs2_write_begin_nolock(struct address_space *mapping,
 			     struct page **pagep, void **fsdata,
 			     struct buffer_head *di_bh, struct page *mmap_page)
 {
-	int ret, credits = OCFS2_INODE_UPDATE_CREDITS;
+	int ret, cluster_of_pages, credits = OCFS2_INODE_UPDATE_CREDITS;
 	unsigned int clusters_to_alloc, extents_to_split;
 	struct ocfs2_write_ctxt *wc;
 	struct inode *inode = mapping->host;
@@ -1722,8 +1741,19 @@ int ocfs2_write_begin_nolock(struct address_space *mapping,
 
 	}
 
-	ocfs2_set_target_boundaries(osb, wc, pos, len,
-				    clusters_to_alloc + extents_to_split);
+	/*
+	 * We have to zero sparse allocated clusters, unwritten extent clusters,
+	 * and non-sparse clusters we just extended.  For non-sparse writes,
+	 * we know zeros will only be needed in the first and/or last cluster.
+	 */
+	if (clusters_to_alloc || extents_to_split ||
+	    (wc->w_clen && (wc->w_desc[0].c_needs_zero ||
+			    wc->w_desc[wc->w_clen - 1].c_needs_zero)))
+		cluster_of_pages = 1;
+	else
+		cluster_of_pages = 0;
+
+	ocfs2_set_target_boundaries(osb, wc, pos, len, cluster_of_pages);
 
 	handle = ocfs2_start_trans(osb, credits);
 	if (IS_ERR(handle)) {
@@ -1756,8 +1786,7 @@ int ocfs2_write_begin_nolock(struct address_space *mapping,
 	 * extent.
 	 */
 	ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos,
-					 clusters_to_alloc + extents_to_split,
-					 mmap_page);
+					 cluster_of_pages, mmap_page);
 	if (ret) {
 		mlog_errno(ret);
 		goto out_quota;
diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c
index b574431a031..b4957c7d9fe 100644
--- a/fs/ocfs2/dcache.c
+++ b/fs/ocfs2/dcache.c
@@ -85,6 +85,17 @@ static int ocfs2_dentry_revalidate(struct dentry *dentry,
 		goto bail;
 	}
 
+	/*
+	 * If the last lookup failed to create dentry lock, let us
+	 * redo it.
+	 */
+	if (!dentry->d_fsdata) {
+		mlog(0, "Inode %llu doesn't have dentry lock, "
+		     "returning false\n",
+		     (unsigned long long)OCFS2_I(inode)->ip_blkno);
+		goto bail;
+	}
+
 	ret = 1;
 
 bail:
@@ -310,22 +321,19 @@ out_attach:
 	return ret;
 }
 
-static DEFINE_SPINLOCK(dentry_list_lock);
+DEFINE_SPINLOCK(dentry_list_lock);
 
 /* We limit the number of dentry locks to drop in one go. We have
  * this limit so that we don't starve other users of ocfs2_wq. */
 #define DL_INODE_DROP_COUNT 64
 
 /* Drop inode references from dentry locks */
-void ocfs2_drop_dl_inodes(struct work_struct *work)
+static void __ocfs2_drop_dl_inodes(struct ocfs2_super *osb, int drop_count)
 {
-	struct ocfs2_super *osb = container_of(work, struct ocfs2_super,
-					       dentry_lock_work);
 	struct ocfs2_dentry_lock *dl;
-	int drop_count = DL_INODE_DROP_COUNT;
 
 	spin_lock(&dentry_list_lock);
-	while (osb->dentry_lock_list && drop_count--) {
+	while (osb->dentry_lock_list && (drop_count < 0 || drop_count--)) {
 		dl = osb->dentry_lock_list;
 		osb->dentry_lock_list = dl->dl_next;
 		spin_unlock(&dentry_list_lock);
@@ -333,11 +341,32 @@ void ocfs2_drop_dl_inodes(struct work_struct *work)
 		kfree(dl);
 		spin_lock(&dentry_list_lock);
 	}
-	if (osb->dentry_lock_list)
+	spin_unlock(&dentry_list_lock);
+}
+
+void ocfs2_drop_dl_inodes(struct work_struct *work)
+{
+	struct ocfs2_super *osb = container_of(work, struct ocfs2_super,
+					       dentry_lock_work);
+
+	__ocfs2_drop_dl_inodes(osb, DL_INODE_DROP_COUNT);
+	/*
+	 * Don't queue dropping if umount is in progress. We flush the
+	 * list in ocfs2_dismount_volume
+	 */
+	spin_lock(&dentry_list_lock);
+	if (osb->dentry_lock_list &&
+	    !ocfs2_test_osb_flag(osb, OCFS2_OSB_DROP_DENTRY_LOCK_IMMED))
 		queue_work(ocfs2_wq, &osb->dentry_lock_work);
 	spin_unlock(&dentry_list_lock);
 }
 
+/* Flush the whole work queue */
+void ocfs2_drop_all_dl_inodes(struct ocfs2_super *osb)
+{
+	__ocfs2_drop_dl_inodes(osb, -1);
+}
+
 /*
  * ocfs2_dentry_iput() and friends.
  *
@@ -368,7 +397,8 @@ static void ocfs2_drop_dentry_lock(struct ocfs2_super *osb,
 	/* We leave dropping of inode reference to ocfs2_wq as that can
 	 * possibly lead to inode deletion which gets tricky */
 	spin_lock(&dentry_list_lock);
-	if (!osb->dentry_lock_list)
+	if (!osb->dentry_lock_list &&
+	    !ocfs2_test_osb_flag(osb, OCFS2_OSB_DROP_DENTRY_LOCK_IMMED))
 		queue_work(ocfs2_wq, &osb->dentry_lock_work);
 	dl->dl_next = osb->dentry_lock_list;
 	osb->dentry_lock_list = dl;
diff --git a/fs/ocfs2/dcache.h b/fs/ocfs2/dcache.h
index faa12e75f98..f5dd1789acf 100644
--- a/fs/ocfs2/dcache.h
+++ b/fs/ocfs2/dcache.h
@@ -49,10 +49,13 @@ struct ocfs2_dentry_lock {
 int ocfs2_dentry_attach_lock(struct dentry *dentry, struct inode *inode,
 			     u64 parent_blkno);
 
+extern spinlock_t dentry_list_lock;
+
 void ocfs2_dentry_lock_put(struct ocfs2_super *osb,
 			   struct ocfs2_dentry_lock *dl);
 
 void ocfs2_drop_dl_inodes(struct work_struct *work);
+void ocfs2_drop_all_dl_inodes(struct ocfs2_super *osb);
 
 struct dentry *ocfs2_find_local_alias(struct inode *inode, u64 parent_blkno,
 				      int skip_unhashed);
diff --git a/fs/ocfs2/dlm/dlmast.c b/fs/ocfs2/dlm/dlmast.c
index d07ddbe4b28..81eff8e5832 100644
--- a/fs/ocfs2/dlm/dlmast.c
+++ b/fs/ocfs2/dlm/dlmast.c
@@ -103,7 +103,6 @@ static void __dlm_queue_ast(struct dlm_ctxt *dlm, struct dlm_lock *lock)
 		     lock->ast_pending, lock->ml.type);
 		BUG();
 	}
-	BUG_ON(!list_empty(&lock->ast_list));
 	if (lock->ast_pending)
 		mlog(0, "lock has an ast getting flushed right now\n");
 
diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c
index bcb9260c373..43e6e328056 100644
--- a/fs/ocfs2/dlm/dlmrecovery.c
+++ b/fs/ocfs2/dlm/dlmrecovery.c
@@ -1118,7 +1118,7 @@ static int dlm_send_mig_lockres_msg(struct dlm_ctxt *dlm,
 
 	mlog(0, "%s:%.*s: sending mig lockres (%s) to %u\n",
 	     dlm->name, res->lockname.len, res->lockname.name,
-	     orig_flags & DLM_MRES_MIGRATION ? "migrate" : "recovery",
+	     orig_flags & DLM_MRES_MIGRATION ? "migration" : "recovery",
 	     send_to);
 
 	/* send it */
diff --git a/fs/ocfs2/dlm/dlmunlock.c b/fs/ocfs2/dlm/dlmunlock.c
index fcf879ed693..756f5b0998e 100644
--- a/fs/ocfs2/dlm/dlmunlock.c
+++ b/fs/ocfs2/dlm/dlmunlock.c
@@ -122,7 +122,7 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm,
 	 * that still has AST's pending... */
 	in_use = !list_empty(&lock->ast_list);
 	spin_unlock(&dlm->ast_lock);
-	if (in_use) {
+	if (in_use && !(flags & LKM_CANCEL)) {
 	       mlog(ML_ERROR, "lockres %.*s: Someone is calling dlmunlock "
 		    "while waiting for an ast!", res->lockname.len,
 		    res->lockname.name);
@@ -131,7 +131,7 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm,
 
 	spin_lock(&res->spinlock);
 	if (res->state & DLM_LOCK_RES_IN_PROGRESS) {
-		if (master_node) {
+		if (master_node && !(flags & LKM_CANCEL)) {
 			mlog(ML_ERROR, "lockres in progress!\n");
 			spin_unlock(&res->spinlock);
 			return DLM_FORWARD;
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 62442e413a0..aa501d3f93f 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1851,6 +1851,7 @@ relock:
 		if (ret)
 			goto out_dio;
 
+		count = ocount;
 		ret = generic_write_checks(file, ppos, &count,
 					   S_ISBLK(inode->i_mode));
 		if (ret)
@@ -1918,8 +1919,10 @@ out_sems:
 
 	mutex_unlock(&inode->i_mutex);
 
+	if (written)
+		ret = written;
 	mlog_exit(ret);
-	return written ? written : ret;
+	return ret;
 }
 
 static int ocfs2_splice_to_file(struct pipe_inode_info *pipe,
diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c
index 9fcd36dcc9a..467b413bec2 100644
--- a/fs/ocfs2/ioctl.c
+++ b/fs/ocfs2/ioctl.c
@@ -7,7 +7,6 @@
 
 #include <linux/fs.h>
 #include <linux/mount.h>
-#include <linux/smp_lock.h>
 
 #define MLOG_MASK_PREFIX ML_INODE
 #include <cluster/masklog.h>
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index f033760ecbe..c48b93ac6b6 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -1954,10 +1954,16 @@ void ocfs2_orphan_scan_init(struct ocfs2_super *osb)
 	os->os_osb = osb;
 	os->os_count = 0;
 	os->os_seqno = 0;
-	os->os_scantime = CURRENT_TIME;
 	mutex_init(&os->os_lock);
 	INIT_DELAYED_WORK(&os->os_orphan_scan_work, ocfs2_orphan_scan_work);
+}
 
+void ocfs2_orphan_scan_start(struct ocfs2_super *osb)
+{
+	struct ocfs2_orphan_scan *os;
+
+	os = &osb->osb_orphan_scan;
+	os->os_scantime = CURRENT_TIME;
 	if (ocfs2_is_hard_readonly(osb) || ocfs2_mount_local(osb))
 		atomic_set(&os->os_state, ORPHAN_SCAN_INACTIVE);
 	else {
diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h
index 5432c7f79cc..2c3222aec62 100644
--- a/fs/ocfs2/journal.h
+++ b/fs/ocfs2/journal.h
@@ -145,6 +145,7 @@ static inline void ocfs2_inode_set_new(struct ocfs2_super *osb,
 
 /* Exported only for the journal struct init code in super.c. Do not call. */
 void ocfs2_orphan_scan_init(struct ocfs2_super *osb);
+void ocfs2_orphan_scan_start(struct ocfs2_super *osb);
 void ocfs2_orphan_scan_stop(struct ocfs2_super *osb);
 void ocfs2_orphan_scan_exit(struct ocfs2_super *osb);
 
@@ -329,20 +330,27 @@ int                  ocfs2_journal_dirty(handle_t *handle,
 /* extended attribute block update */
 #define OCFS2_XATTR_BLOCK_UPDATE_CREDITS 1
 
+/* Update of a single quota block */
+#define OCFS2_QUOTA_BLOCK_UPDATE_CREDITS 1
+
 /* global quotafile inode update, data block */
-#define OCFS2_QINFO_WRITE_CREDITS (OCFS2_INODE_UPDATE_CREDITS + 1)
+#define OCFS2_QINFO_WRITE_CREDITS (OCFS2_INODE_UPDATE_CREDITS + \
+				   OCFS2_QUOTA_BLOCK_UPDATE_CREDITS)
 
+#define OCFS2_LOCAL_QINFO_WRITE_CREDITS OCFS2_QUOTA_BLOCK_UPDATE_CREDITS
 /*
  * The two writes below can accidentally see global info dirty due
  * to set_info() quotactl so make them prepared for the writes.
  */
 /* quota data block, global info */
 /* Write to local quota file */
-#define OCFS2_QWRITE_CREDITS (OCFS2_QINFO_WRITE_CREDITS + 1)
+#define OCFS2_QWRITE_CREDITS (OCFS2_QINFO_WRITE_CREDITS + \
+			      OCFS2_QUOTA_BLOCK_UPDATE_CREDITS)
 
 /* global quota data block, local quota data block, global quota inode,
  * global quota info */
-#define OCFS2_QSYNC_CREDITS (OCFS2_INODE_UPDATE_CREDITS + 3)
+#define OCFS2_QSYNC_CREDITS (OCFS2_QINFO_WRITE_CREDITS + \
+			     2 * OCFS2_QUOTA_BLOCK_UPDATE_CREDITS)
 
 static inline int ocfs2_quota_trans_credits(struct super_block *sb)
 {
@@ -355,11 +363,6 @@ static inline int ocfs2_quota_trans_credits(struct super_block *sb)
 	return credits;
 }
 
-/* Number of credits needed for removing quota structure from file */
-int ocfs2_calc_qdel_credits(struct super_block *sb, int type);
-/* Number of credits needed for initialization of new quota structure */
-int ocfs2_calc_qinit_credits(struct super_block *sb, int type);
-
 /* group extend. inode update and last group update. */
 #define OCFS2_GROUP_EXTEND_CREDITS	(OCFS2_INODE_UPDATE_CREDITS + 1)
 
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index c9345ebb849..39e1d5a3950 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -224,10 +224,12 @@ enum ocfs2_mount_options
 	OCFS2_MOUNT_GRPQUOTA = 1 << 10, /* We support group quotas */
 };
 
-#define OCFS2_OSB_SOFT_RO	0x0001
-#define OCFS2_OSB_HARD_RO	0x0002
-#define OCFS2_OSB_ERROR_FS	0x0004
-#define OCFS2_DEFAULT_ATIME_QUANTUM	60
+#define OCFS2_OSB_SOFT_RO			0x0001
+#define OCFS2_OSB_HARD_RO			0x0002
+#define OCFS2_OSB_ERROR_FS			0x0004
+#define OCFS2_OSB_DROP_DENTRY_LOCK_IMMED	0x0008
+
+#define OCFS2_DEFAULT_ATIME_QUANTUM		60
 
 struct ocfs2_journal;
 struct ocfs2_slot_info;
@@ -490,6 +492,18 @@ static inline void ocfs2_set_osb_flag(struct ocfs2_super *osb,
 	spin_unlock(&osb->osb_lock);
 }
 
+
+static inline unsigned long  ocfs2_test_osb_flag(struct ocfs2_super *osb,
+						 unsigned long flag)
+{
+	unsigned long ret;
+
+	spin_lock(&osb->osb_lock);
+	ret = osb->osb_flags & flag;
+	spin_unlock(&osb->osb_lock);
+	return ret;
+}
+
 static inline void ocfs2_set_ro_flag(struct ocfs2_super *osb,
 				     int hard)
 {
diff --git a/fs/ocfs2/ocfs2_lockid.h b/fs/ocfs2/ocfs2_lockid.h
index fcdba091af3..c212cf5a2bd 100644
--- a/fs/ocfs2/ocfs2_lockid.h
+++ b/fs/ocfs2/ocfs2_lockid.h
@@ -108,6 +108,7 @@ static char *ocfs2_lock_type_strings[] = {
 	[OCFS2_LOCK_TYPE_OPEN] = "Open",
 	[OCFS2_LOCK_TYPE_FLOCK] = "Flock",
 	[OCFS2_LOCK_TYPE_QINFO] = "Quota",
+	[OCFS2_LOCK_TYPE_NFS_SYNC] = "NFSSync",
 	[OCFS2_LOCK_TYPE_ORPHAN_SCAN] = "OrphanScan",
 };
 
diff --git a/fs/ocfs2/quota.h b/fs/ocfs2/quota.h
index 7365e2e0870..3fb96fcd4c8 100644
--- a/fs/ocfs2/quota.h
+++ b/fs/ocfs2/quota.h
@@ -50,7 +50,6 @@ struct ocfs2_mem_dqinfo {
 	unsigned int dqi_chunks;	/* Number of chunks in local quota file */
 	unsigned int dqi_blocks;	/* Number of blocks allocated for local quota file */
 	unsigned int dqi_syncms;	/* How often should we sync with other nodes */
-	unsigned int dqi_syncjiff;	/* Precomputed dqi_syncms in jiffies */
 	struct list_head dqi_chunk;	/* List of chunks */
 	struct inode *dqi_gqinode;	/* Global quota file inode */
 	struct ocfs2_lock_res dqi_gqlock;	/* Lock protecting quota information structure */
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index edfa60cd155..44f2a5e1d04 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -23,6 +23,7 @@
 #include "sysfile.h"
 #include "dlmglue.h"
 #include "uptodate.h"
+#include "super.h"
 #include "quota.h"
 
 static struct workqueue_struct *ocfs2_quota_wq = NULL;
@@ -69,6 +70,7 @@ static void ocfs2_global_mem2diskdqb(void *dp, struct dquot *dquot)
 	d->dqb_curspace = cpu_to_le64(m->dqb_curspace);
 	d->dqb_btime = cpu_to_le64(m->dqb_btime);
 	d->dqb_itime = cpu_to_le64(m->dqb_itime);
+	d->dqb_pad1 = d->dqb_pad2 = 0;
 }
 
 static int ocfs2_global_is_id(void *dp, struct dquot *dquot)
@@ -113,6 +115,15 @@ int ocfs2_read_quota_block(struct inode *inode, u64 v_block,
 	int rc = 0;
 	struct buffer_head *tmp = *bh;
 
+	if (i_size_read(inode) >> inode->i_sb->s_blocksize_bits <= v_block) {
+		ocfs2_error(inode->i_sb,
+			    "Quota file %llu is probably corrupted! Requested "
+			    "to read block %Lu but file has size only %Lu\n",
+			    (unsigned long long)OCFS2_I(inode)->ip_blkno,
+			    (unsigned long long)v_block,
+			    (unsigned long long)i_size_read(inode));
+		return -EIO;
+	}
 	rc = ocfs2_read_virt_blocks(inode, v_block, 1, &tmp, 0,
 				    ocfs2_validate_quota_block);
 	if (rc)
@@ -211,14 +222,13 @@ ssize_t ocfs2_quota_write(struct super_block *sb, int type,
 
 	mutex_lock_nested(&gqinode->i_mutex, I_MUTEX_QUOTA);
 	if (gqinode->i_size < off + len) {
-		down_write(&OCFS2_I(gqinode)->ip_alloc_sem);
-		err = ocfs2_extend_no_holes(gqinode, off + len, off);
-		up_write(&OCFS2_I(gqinode)->ip_alloc_sem);
-		if (err < 0)
-			goto out;
+		loff_t rounded_end =
+				ocfs2_align_bytes_to_blocks(sb, off + len);
+
+		/* Space is already allocated in ocfs2_global_read_dquot() */
 		err = ocfs2_simple_size_update(gqinode,
 					       oinfo->dqi_gqi_bh,
-					       off + len);
+					       rounded_end);
 		if (err < 0)
 			goto out;
 		new = 1;
@@ -234,7 +244,7 @@ ssize_t ocfs2_quota_write(struct super_block *sb, int type,
 	}
 	if (err) {
 		mlog_errno(err);
-		return err;
+		goto out;
 	}
 	lock_buffer(bh);
 	if (new)
@@ -342,7 +352,6 @@ int ocfs2_global_read_info(struct super_block *sb, int type)
 	info->dqi_bgrace = le32_to_cpu(dinfo.dqi_bgrace);
 	info->dqi_igrace = le32_to_cpu(dinfo.dqi_igrace);
 	oinfo->dqi_syncms = le32_to_cpu(dinfo.dqi_syncms);
-	oinfo->dqi_syncjiff = msecs_to_jiffies(oinfo->dqi_syncms);
 	oinfo->dqi_gi.dqi_blocks = le32_to_cpu(dinfo.dqi_blocks);
 	oinfo->dqi_gi.dqi_free_blk = le32_to_cpu(dinfo.dqi_free_blk);
 	oinfo->dqi_gi.dqi_free_entry = le32_to_cpu(dinfo.dqi_free_entry);
@@ -352,7 +361,7 @@ int ocfs2_global_read_info(struct super_block *sb, int type)
 	oinfo->dqi_gi.dqi_qtree_depth = qtree_depth(&oinfo->dqi_gi);
 	INIT_DELAYED_WORK(&oinfo->dqi_sync_work, qsync_work_fn);
 	queue_delayed_work(ocfs2_quota_wq, &oinfo->dqi_sync_work,
-			   oinfo->dqi_syncjiff);
+			   msecs_to_jiffies(oinfo->dqi_syncms));
 
 out_err:
 	mlog_exit(status);
@@ -402,13 +411,36 @@ int ocfs2_global_write_info(struct super_block *sb, int type)
 	return err;
 }
 
+static int ocfs2_global_qinit_alloc(struct super_block *sb, int type)
+{
+	struct ocfs2_mem_dqinfo *oinfo = sb_dqinfo(sb, type)->dqi_priv;
+
+	/*
+	 * We may need to allocate tree blocks and a leaf block but not the
+	 * root block
+	 */
+	return oinfo->dqi_gi.dqi_qtree_depth;
+}
+
+static int ocfs2_calc_global_qinit_credits(struct super_block *sb, int type)
+{
+	/* We modify all the allocated blocks, tree root, and info block */
+	return (ocfs2_global_qinit_alloc(sb, type) + 2) *
+			OCFS2_QUOTA_BLOCK_UPDATE_CREDITS;
+}
+
 /* Read in information from global quota file and acquire a reference to it.
  * dquot_acquire() has already started the transaction and locked quota file */
 int ocfs2_global_read_dquot(struct dquot *dquot)
 {
 	int err, err2, ex = 0;
-	struct ocfs2_mem_dqinfo *info =
-			sb_dqinfo(dquot->dq_sb, dquot->dq_type)->dqi_priv;
+	struct super_block *sb = dquot->dq_sb;
+	int type = dquot->dq_type;
+	struct ocfs2_mem_dqinfo *info = sb_dqinfo(sb, type)->dqi_priv;
+	struct ocfs2_super *osb = OCFS2_SB(sb);
+	struct inode *gqinode = info->dqi_gqinode;
+	int need_alloc = ocfs2_global_qinit_alloc(sb, type);
+	handle_t *handle = NULL;
 
 	err = ocfs2_qinfo_lock(info, 0);
 	if (err < 0)
@@ -419,14 +451,33 @@ int ocfs2_global_read_dquot(struct dquot *dquot)
 	OCFS2_DQUOT(dquot)->dq_use_count++;
 	OCFS2_DQUOT(dquot)->dq_origspace = dquot->dq_dqb.dqb_curspace;
 	OCFS2_DQUOT(dquot)->dq_originodes = dquot->dq_dqb.dqb_curinodes;
+	ocfs2_qinfo_unlock(info, 0);
+
 	if (!dquot->dq_off) {	/* No real quota entry? */
-		/* Upgrade to exclusive lock for allocation */
-		ocfs2_qinfo_unlock(info, 0);
-		err = ocfs2_qinfo_lock(info, 1);
-		if (err < 0)
-			goto out_qlock;
 		ex = 1;
+		/*
+		 * Add blocks to quota file before we start a transaction since
+		 * locking allocators ranks above a transaction start
+		 */
+		WARN_ON(journal_current_handle());
+		down_write(&OCFS2_I(gqinode)->ip_alloc_sem);
+		err = ocfs2_extend_no_holes(gqinode,
+			gqinode->i_size + (need_alloc << sb->s_blocksize_bits),
+			gqinode->i_size);
+		up_write(&OCFS2_I(gqinode)->ip_alloc_sem);
+		if (err < 0)
+			goto out;
 	}
+
+	handle = ocfs2_start_trans(osb,
+				   ocfs2_calc_global_qinit_credits(sb, type));
+	if (IS_ERR(handle)) {
+		err = PTR_ERR(handle);
+		goto out;
+	}
+	err = ocfs2_qinfo_lock(info, ex);
+	if (err < 0)
+		goto out_trans;
 	err = qtree_write_dquot(&info->dqi_gi, dquot);
 	if (ex && info_dirty(sb_dqinfo(dquot->dq_sb, dquot->dq_type))) {
 		err2 = __ocfs2_global_write_info(dquot->dq_sb, dquot->dq_type);
@@ -438,6 +489,9 @@ out_qlock:
 		ocfs2_qinfo_unlock(info, 1);
 	else
 		ocfs2_qinfo_unlock(info, 0);
+out_trans:
+	if (handle)
+		ocfs2_commit_trans(osb, handle);
 out:
 	if (err < 0)
 		mlog_errno(err);
@@ -607,7 +661,7 @@ static void qsync_work_fn(struct work_struct *work)
 
 	dquot_scan_active(sb, ocfs2_sync_dquot_helper, oinfo->dqi_type);
 	queue_delayed_work(ocfs2_quota_wq, &oinfo->dqi_sync_work,
-			   oinfo->dqi_syncjiff);
+			   msecs_to_jiffies(oinfo->dqi_syncms));
 }
 
 /*
@@ -635,20 +689,18 @@ out:
 	return status;
 }
 
-int ocfs2_calc_qdel_credits(struct super_block *sb, int type)
+static int ocfs2_calc_qdel_credits(struct super_block *sb, int type)
 {
-	struct ocfs2_mem_dqinfo *oinfo;
-	int features[MAXQUOTAS] = { OCFS2_FEATURE_RO_COMPAT_USRQUOTA,
-				    OCFS2_FEATURE_RO_COMPAT_GRPQUOTA };
-
-	if (!OCFS2_HAS_RO_COMPAT_FEATURE(sb, features[type]))
-		return 0;
-
-	oinfo = sb_dqinfo(sb, type)->dqi_priv;
-	/* We modify tree, leaf block, global info, local chunk header,
-	 * global and local inode */
-	return oinfo->dqi_gi.dqi_qtree_depth + 2 + 1 +
-	       2 * OCFS2_INODE_UPDATE_CREDITS;
+	struct ocfs2_mem_dqinfo *oinfo = sb_dqinfo(sb, type)->dqi_priv;
+	/*
+	 * We modify tree, leaf block, global info, local chunk header,
+	 * global and local inode; OCFS2_QINFO_WRITE_CREDITS already
+	 * accounts for inode update
+	 */
+	return (oinfo->dqi_gi.dqi_qtree_depth + 2) *
+	       OCFS2_QUOTA_BLOCK_UPDATE_CREDITS +
+	       OCFS2_QINFO_WRITE_CREDITS +
+	       OCFS2_INODE_UPDATE_CREDITS;
 }
 
 static int ocfs2_release_dquot(struct dquot *dquot)
@@ -680,33 +732,10 @@ out:
 	return status;
 }
 
-int ocfs2_calc_qinit_credits(struct super_block *sb, int type)
-{
-	struct ocfs2_mem_dqinfo *oinfo;
-	int features[MAXQUOTAS] = { OCFS2_FEATURE_RO_COMPAT_USRQUOTA,
-				    OCFS2_FEATURE_RO_COMPAT_GRPQUOTA };
-	struct ocfs2_dinode *lfe, *gfe;
-
-	if (!OCFS2_HAS_RO_COMPAT_FEATURE(sb, features[type]))
-		return 0;
-
-	oinfo = sb_dqinfo(sb, type)->dqi_priv;
-	gfe = (struct ocfs2_dinode *)oinfo->dqi_gqi_bh->b_data;
-	lfe = (struct ocfs2_dinode *)oinfo->dqi_lqi_bh->b_data;
-	/* We can extend local file + global file. In local file we
-	 * can modify info, chunk header block and dquot block. In
-	 * global file we can modify info, tree and leaf block */
-	return ocfs2_calc_extend_credits(sb, &lfe->id2.i_list, 0) +
-	       ocfs2_calc_extend_credits(sb, &gfe->id2.i_list, 0) +
-	       3 + oinfo->dqi_gi.dqi_qtree_depth + 2;
-}
-
 static int ocfs2_acquire_dquot(struct dquot *dquot)
 {
-	handle_t *handle;
 	struct ocfs2_mem_dqinfo *oinfo =
 			sb_dqinfo(dquot->dq_sb, dquot->dq_type)->dqi_priv;
-	struct ocfs2_super *osb = OCFS2_SB(dquot->dq_sb);
 	int status = 0;
 
 	mlog_entry("id=%u, type=%d", dquot->dq_id, dquot->dq_type);
@@ -715,16 +744,7 @@ static int ocfs2_acquire_dquot(struct dquot *dquot)
 	status = ocfs2_lock_global_qf(oinfo, 1);
 	if (status < 0)
 		goto out;
-	handle = ocfs2_start_trans(osb,
-		ocfs2_calc_qinit_credits(dquot->dq_sb, dquot->dq_type));
-	if (IS_ERR(handle)) {
-		status = PTR_ERR(handle);
-		mlog_errno(status);
-		goto out_ilock;
-	}
 	status = dquot_acquire(dquot);
-	ocfs2_commit_trans(osb, handle);
-out_ilock:
 	ocfs2_unlock_global_qf(oinfo, 1);
 out:
 	mlog_exit(status);
diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index 5a460fa8255..bdb09cb6e1f 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -20,6 +20,7 @@
 #include "sysfile.h"
 #include "dlmglue.h"
 #include "quota.h"
+#include "uptodate.h"
 
 /* Number of local quota structures per block */
 static inline unsigned int ol_quota_entries_per_block(struct super_block *sb)
@@ -100,7 +101,8 @@ static int ocfs2_modify_bh(struct inode *inode, struct buffer_head *bh,
 	handle_t *handle;
 	int status;
 
-	handle = ocfs2_start_trans(OCFS2_SB(sb), 1);
+	handle = ocfs2_start_trans(OCFS2_SB(sb),
+				   OCFS2_QUOTA_BLOCK_UPDATE_CREDITS);
 	if (IS_ERR(handle)) {
 		status = PTR_ERR(handle);
 		mlog_errno(status);
@@ -610,7 +612,8 @@ int ocfs2_finish_quota_recovery(struct ocfs2_super *osb,
 			goto out_bh;
 		/* Mark quota file as clean if we are recovering quota file of
 		 * some other node. */
-		handle = ocfs2_start_trans(osb, 1);
+		handle = ocfs2_start_trans(osb,
+					   OCFS2_LOCAL_QINFO_WRITE_CREDITS);
 		if (IS_ERR(handle)) {
 			status = PTR_ERR(handle);
 			mlog_errno(status);
@@ -940,7 +943,7 @@ static struct ocfs2_quota_chunk *ocfs2_local_quota_add_chunk(
 	struct ocfs2_local_disk_chunk *dchunk;
 	int status;
 	handle_t *handle;
-	struct buffer_head *bh = NULL;
+	struct buffer_head *bh = NULL, *dbh = NULL;
 	u64 p_blkno;
 
 	/* We are protected by dqio_sem so no locking needed */
@@ -964,32 +967,35 @@ static struct ocfs2_quota_chunk *ocfs2_local_quota_add_chunk(
 		mlog_errno(status);
 		goto out;
 	}
+	/* Local quota info and two new blocks we initialize */
+	handle = ocfs2_start_trans(OCFS2_SB(sb),
+			OCFS2_LOCAL_QINFO_WRITE_CREDITS +
+			2 * OCFS2_QUOTA_BLOCK_UPDATE_CREDITS);
+	if (IS_ERR(handle)) {
+		status = PTR_ERR(handle);
+		mlog_errno(status);
+		goto out;
+	}
 
+	/* Initialize chunk header */
 	down_read(&OCFS2_I(lqinode)->ip_alloc_sem);
 	status = ocfs2_extent_map_get_blocks(lqinode, oinfo->dqi_blocks,
 					     &p_blkno, NULL, NULL);
 	up_read(&OCFS2_I(lqinode)->ip_alloc_sem);
 	if (status < 0) {
 		mlog_errno(status);
-		goto out;
+		goto out_trans;
 	}
 	bh = sb_getblk(sb, p_blkno);
 	if (!bh) {
 		status = -ENOMEM;
 		mlog_errno(status);
-		goto out;
+		goto out_trans;
 	}
 	dchunk = (struct ocfs2_local_disk_chunk *)bh->b_data;
-
-	handle = ocfs2_start_trans(OCFS2_SB(sb), 2);
-	if (IS_ERR(handle)) {
-		status = PTR_ERR(handle);
-		mlog_errno(status);
-		goto out;
-	}
-
+	ocfs2_set_new_buffer_uptodate(lqinode, bh);
 	status = ocfs2_journal_access_dq(handle, lqinode, bh,
-					 OCFS2_JOURNAL_ACCESS_WRITE);
+					 OCFS2_JOURNAL_ACCESS_CREATE);
 	if (status < 0) {
 		mlog_errno(status);
 		goto out_trans;
@@ -999,7 +1005,6 @@ static struct ocfs2_quota_chunk *ocfs2_local_quota_add_chunk(
 	memset(dchunk->dqc_bitmap, 0,
 	       sb->s_blocksize - sizeof(struct ocfs2_local_disk_chunk) -
 	       OCFS2_QBLK_RESERVED_SPACE);
-	set_buffer_uptodate(bh);
 	unlock_buffer(bh);
 	status = ocfs2_journal_dirty(handle, bh);
 	if (status < 0) {
@@ -1007,6 +1012,38 @@ static struct ocfs2_quota_chunk *ocfs2_local_quota_add_chunk(
 		goto out_trans;
 	}
 
+	/* Initialize new block with structures */
+	down_read(&OCFS2_I(lqinode)->ip_alloc_sem);
+	status = ocfs2_extent_map_get_blocks(lqinode, oinfo->dqi_blocks + 1,
+					     &p_blkno, NULL, NULL);
+	up_read(&OCFS2_I(lqinode)->ip_alloc_sem);
+	if (status < 0) {
+		mlog_errno(status);
+		goto out_trans;
+	}
+	dbh = sb_getblk(sb, p_blkno);
+	if (!dbh) {
+		status = -ENOMEM;
+		mlog_errno(status);
+		goto out_trans;
+	}
+	ocfs2_set_new_buffer_uptodate(lqinode, dbh);
+	status = ocfs2_journal_access_dq(handle, lqinode, dbh,
+					 OCFS2_JOURNAL_ACCESS_CREATE);
+	if (status < 0) {
+		mlog_errno(status);
+		goto out_trans;
+	}
+	lock_buffer(dbh);
+	memset(dbh->b_data, 0, sb->s_blocksize - OCFS2_QBLK_RESERVED_SPACE);
+	unlock_buffer(dbh);
+	status = ocfs2_journal_dirty(handle, dbh);
+	if (status < 0) {
+		mlog_errno(status);
+		goto out_trans;
+	}
+
+	/* Update local quotafile info */
 	oinfo->dqi_blocks += 2;
 	oinfo->dqi_chunks++;
 	status = ocfs2_local_write_info(sb, type);
@@ -1031,6 +1068,7 @@ out_trans:
 	ocfs2_commit_trans(OCFS2_SB(sb), handle);
 out:
 	brelse(bh);
+	brelse(dbh);
 	kmem_cache_free(ocfs2_qf_chunk_cachep, chunk);
 	return ERR_PTR(status);
 }
@@ -1048,6 +1086,8 @@ static struct ocfs2_quota_chunk *ocfs2_extend_local_quota_file(
 	struct ocfs2_local_disk_chunk *dchunk;
 	int epb = ol_quota_entries_per_block(sb);
 	unsigned int chunk_blocks;
+	struct buffer_head *bh;
+	u64 p_blkno;
 	int status;
 	handle_t *handle;
 
@@ -1075,12 +1115,49 @@ static struct ocfs2_quota_chunk *ocfs2_extend_local_quota_file(
 		mlog_errno(status);
 		goto out;
 	}
-	handle = ocfs2_start_trans(OCFS2_SB(sb), 2);
+
+	/* Get buffer from the just added block */
+	down_read(&OCFS2_I(lqinode)->ip_alloc_sem);
+	status = ocfs2_extent_map_get_blocks(lqinode, oinfo->dqi_blocks,
+					     &p_blkno, NULL, NULL);
+	up_read(&OCFS2_I(lqinode)->ip_alloc_sem);
+	if (status < 0) {
+		mlog_errno(status);
+		goto out;
+	}
+	bh = sb_getblk(sb, p_blkno);
+	if (!bh) {
+		status = -ENOMEM;
+		mlog_errno(status);
+		goto out;
+	}
+	ocfs2_set_new_buffer_uptodate(lqinode, bh);
+
+	/* Local quota info, chunk header and the new block we initialize */
+	handle = ocfs2_start_trans(OCFS2_SB(sb),
+			OCFS2_LOCAL_QINFO_WRITE_CREDITS +
+			2 * OCFS2_QUOTA_BLOCK_UPDATE_CREDITS);
 	if (IS_ERR(handle)) {
 		status = PTR_ERR(handle);
 		mlog_errno(status);
 		goto out;
 	}
+	/* Zero created block */
+	status = ocfs2_journal_access_dq(handle, lqinode, bh,
+				 OCFS2_JOURNAL_ACCESS_CREATE);
+	if (status < 0) {
+		mlog_errno(status);
+		goto out_trans;
+	}
+	lock_buffer(bh);
+	memset(bh->b_data, 0, sb->s_blocksize);
+	unlock_buffer(bh);
+	status = ocfs2_journal_dirty(handle, bh);
+	if (status < 0) {
+		mlog_errno(status);
+		goto out_trans;
+	}
+	/* Update chunk header */
 	status = ocfs2_journal_access_dq(handle, lqinode, chunk->qc_headerbh,
 				 OCFS2_JOURNAL_ACCESS_WRITE);
 	if (status < 0) {
@@ -1097,6 +1174,7 @@ static struct ocfs2_quota_chunk *ocfs2_extend_local_quota_file(
 		mlog_errno(status);
 		goto out_trans;
 	}
+	/* Update file header */
 	oinfo->dqi_blocks++;
 	status = ocfs2_local_write_info(sb, type);
 	if (status < 0) {
diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c
index 3f661376a2d..e49c4105026 100644
--- a/fs/ocfs2/stack_o2cb.c
+++ b/fs/ocfs2/stack_o2cb.c
@@ -17,6 +17,7 @@
  * General Public License for more details.
  */
 
+#include <linux/kernel.h>
 #include <linux/crc32.h>
 #include <linux/module.h>
 
@@ -153,7 +154,7 @@ static int status_map[] = {
 
 static int dlm_status_to_errno(enum dlm_status status)
 {
-	BUG_ON(status > (sizeof(status_map) / sizeof(status_map[0])));
+	BUG_ON(status < 0 || status >= ARRAY_SIZE(status_map));
 
 	return status_map[status];
 }
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 7efb349fb9b..a3f8871d21f 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -777,6 +777,7 @@ static int ocfs2_sb_probe(struct super_block *sb,
 		}
 		di = (struct ocfs2_dinode *) (*bh)->b_data;
 		memset(stats, 0, sizeof(struct ocfs2_blockcheck_stats));
+		spin_lock_init(&stats->b_lock);
 		status = ocfs2_verify_volume(di, *bh, blksize, stats);
 		if (status >= 0)
 			goto bail;
@@ -1182,7 +1183,7 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 	wake_up(&osb->osb_mount_event);
 
 	/* Start this when the mount is almost sure of being successful */
-	ocfs2_orphan_scan_init(osb);
+	ocfs2_orphan_scan_start(osb);
 
 	mlog_exit(status);
 	return status;
@@ -1213,14 +1214,31 @@ static int ocfs2_get_sb(struct file_system_type *fs_type,
 			   mnt);
 }
 
+static void ocfs2_kill_sb(struct super_block *sb)
+{
+	struct ocfs2_super *osb = OCFS2_SB(sb);
+
+	/* Failed mount? */
+	if (!osb || atomic_read(&osb->vol_state) == VOLUME_DISABLED)
+		goto out;
+
+	/* Prevent further queueing of inode drop events */
+	spin_lock(&dentry_list_lock);
+	ocfs2_set_osb_flag(osb, OCFS2_OSB_DROP_DENTRY_LOCK_IMMED);
+	spin_unlock(&dentry_list_lock);
+	/* Wait for work to finish and/or remove it */
+	cancel_work_sync(&osb->dentry_lock_work);
+out:
+	kill_block_super(sb);
+}
+
 static struct file_system_type ocfs2_fs_type = {
 	.owner          = THIS_MODULE,
 	.name           = "ocfs2",
 	.get_sb         = ocfs2_get_sb, /* is this called when we mount
 					* the fs? */
-	.kill_sb        = kill_block_super, /* set to the generic one
-					     * right now, but do we
-					     * need to change that? */
+	.kill_sb        = ocfs2_kill_sb,
+
 	.fs_flags       = FS_REQUIRES_DEV|FS_RENAME_DOES_D_MOVE,
 	.next           = NULL
 };
@@ -1819,6 +1837,12 @@ static void ocfs2_dismount_volume(struct super_block *sb, int mnt_err)
 
 	debugfs_remove(osb->osb_ctxt);
 
+	/*
+	 * Flush inode dropping work queue so that deletes are
+	 * performed while the filesystem is still working
+	 */
+	ocfs2_drop_all_dl_inodes(osb);
+
 	/* Orphan scan should be stopped as early as possible */
 	ocfs2_orphan_scan_stop(osb);
 
@@ -1981,6 +2005,8 @@ static int ocfs2_initialize_super(struct super_block *sb,
 	snprintf(osb->dev_str, sizeof(osb->dev_str), "%u,%u",
 		 MAJOR(osb->sb->s_dev), MINOR(osb->sb->s_dev));
 
+	ocfs2_orphan_scan_init(osb);
+
 	status = ocfs2_recovery_init(osb);
 	if (status) {
 		mlog(ML_ERROR, "Unable to initialize recovery state\n");
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index ba320e25074..d1a27cda984 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -1052,7 +1052,8 @@ static int ocfs2_xattr_block_get(struct inode *inode,
 	struct ocfs2_xattr_block *xb;
 	struct ocfs2_xattr_value_root *xv;
 	size_t size;
-	int ret = -ENODATA, name_offset, name_len, block_off, i;
+	int ret = -ENODATA, name_offset, name_len, i;
+	int uninitialized_var(block_off);
 
 	xs->bucket = ocfs2_xattr_bucket_new(inode);
 	if (!xs->bucket) {
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 1a9c7878f86..ea4e6cb29e1 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -436,7 +436,7 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno,
 	rcu_assign_pointer(ptbl->part[partno], p);
 
 	/* suppress uevent if the disk supresses it */
-	if (!dev_get_uevent_suppress(pdev))
+	if (!dev_get_uevent_suppress(ddev))
 		kobject_uevent(&pdev->kobj, KOBJ_ADD);
 
 	return p;
diff --git a/fs/pipe.c b/fs/pipe.c
index f7dd21ad85a..52c41511483 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -68,8 +68,8 @@ void pipe_double_lock(struct pipe_inode_info *pipe1,
 		pipe_lock_nested(pipe1, I_MUTEX_PARENT);
 		pipe_lock_nested(pipe2, I_MUTEX_CHILD);
 	} else {
-		pipe_lock_nested(pipe2, I_MUTEX_CHILD);
-		pipe_lock_nested(pipe1, I_MUTEX_PARENT);
+		pipe_lock_nested(pipe2, I_MUTEX_PARENT);
+		pipe_lock_nested(pipe1, I_MUTEX_CHILD);
 	}
 }
 
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 3ce5ae9e3d2..6f742f6658a 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -234,23 +234,20 @@ static int check_mem_permission(struct task_struct *task)
 
 struct mm_struct *mm_for_maps(struct task_struct *task)
 {
-	struct mm_struct *mm = get_task_mm(task);
-	if (!mm)
+	struct mm_struct *mm;
+
+	if (mutex_lock_killable(&task->cred_guard_mutex))
 		return NULL;
-	down_read(&mm->mmap_sem);
-	task_lock(task);
-	if (task->mm != mm)
-		goto out;
-	if (task->mm != current->mm &&
-	    __ptrace_may_access(task, PTRACE_MODE_READ) < 0)
-		goto out;
-	task_unlock(task);
+
+	mm = get_task_mm(task);
+	if (mm && mm != current->mm &&
+			!ptrace_may_access(task, PTRACE_MODE_READ)) {
+		mmput(mm);
+		mm = NULL;
+	}
+	mutex_unlock(&task->cred_guard_mutex);
+
 	return mm;
-out:
-	task_unlock(task);
-	up_read(&mm->mmap_sem);
-	mmput(mm);
-	return NULL;
 }
 
 static int proc_pid_cmdline(struct task_struct *task, char * buffer)
@@ -1006,12 +1003,7 @@ static ssize_t oom_adjust_read(struct file *file, char __user *buf,
 
 	if (!task)
 		return -ESRCH;
-	task_lock(task);
-	if (task->mm)
-		oom_adjust = task->mm->oom_adj;
-	else
-		oom_adjust = OOM_DISABLE;
-	task_unlock(task);
+	oom_adjust = task->oomkilladj;
 	put_task_struct(task);
 
 	len = snprintf(buffer, sizeof(buffer), "%i\n", oom_adjust);
@@ -1040,19 +1032,11 @@ static ssize_t oom_adjust_write(struct file *file, const char __user *buf,
 	task = get_proc_task(file->f_path.dentry->d_inode);
 	if (!task)
 		return -ESRCH;
-	task_lock(task);
-	if (!task->mm) {
-		task_unlock(task);
-		put_task_struct(task);
-		return -EINVAL;
-	}
-	if (oom_adjust < task->mm->oom_adj && !capable(CAP_SYS_RESOURCE)) {
-		task_unlock(task);
+	if (oom_adjust < task->oomkilladj && !capable(CAP_SYS_RESOURCE)) {
 		put_task_struct(task);
 		return -EACCES;
 	}
-	task->mm->oom_adj = oom_adjust;
-	task_unlock(task);
+	task->oomkilladj = oom_adjust;
 	put_task_struct(task);
 	if (end - buffer == 0)
 		return -EIO;
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 6f61b7cc32e..9bd8be1d235 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -119,6 +119,7 @@ static void *m_start(struct seq_file *m, loff_t *pos)
 	mm = mm_for_maps(priv->task);
 	if (!mm)
 		return NULL;
+	down_read(&mm->mmap_sem);
 
 	tail_vma = get_gate_vma(priv->task);
 	priv->tail_vma = tail_vma;
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
index 64a72e2e765..8f5c05d3dbd 100644
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -189,6 +189,7 @@ static void *m_start(struct seq_file *m, loff_t *pos)
 		priv->task = NULL;
 		return NULL;
 	}
+	down_read(&mm->mmap_sem);
 
 	/* start from the Nth VMA */
 	for (p = rb_first(&mm->mm_rb); p; p = rb_next(p))
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 607c579e5ec..38f7bd559f3 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -2042,7 +2042,6 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id,
 		 * changes */
 		invalidate_bdev(sb->s_bdev);
 	}
-	mutex_lock(&inode->i_mutex);
 	mutex_lock(&dqopt->dqonoff_mutex);
 	if (sb_has_quota_loaded(sb, type)) {
 		error = -EBUSY;
@@ -2054,9 +2053,11 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id,
 		 * possible) Also nobody should write to the file - we use
 		 * special IO operations which ignore the immutable bit. */
 		down_write(&dqopt->dqptr_sem);
+		mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
 		oldflags = inode->i_flags & (S_NOATIME | S_IMMUTABLE |
 					     S_NOQUOTA);
 		inode->i_flags |= S_NOQUOTA | S_NOATIME | S_IMMUTABLE;
+		mutex_unlock(&inode->i_mutex);
 		up_write(&dqopt->dqptr_sem);
 		sb->dq_op->drop(inode);
 	}
@@ -2080,7 +2081,6 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id,
 		goto out_file_init;
 	}
 	mutex_unlock(&dqopt->dqio_mutex);
-	mutex_unlock(&inode->i_mutex);
 	spin_lock(&dq_state_lock);
 	dqopt->flags |= dquot_state_flag(flags, type);
 	spin_unlock(&dq_state_lock);
@@ -2094,16 +2094,17 @@ out_file_init:
 	dqopt->files[type] = NULL;
 	iput(inode);
 out_lock:
-	mutex_unlock(&dqopt->dqonoff_mutex);
 	if (oldflags != -1) {
 		down_write(&dqopt->dqptr_sem);
+		mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
 		/* Set the flags back (in the case of accidental quotaon()
 		 * on a wrong file we don't want to mess up the flags) */
 		inode->i_flags &= ~(S_NOATIME | S_NOQUOTA | S_IMMUTABLE);
 		inode->i_flags |= oldflags;
+		mutex_unlock(&inode->i_mutex);
 		up_write(&dqopt->dqptr_sem);
 	}
-	mutex_unlock(&inode->i_mutex);
+	mutex_unlock(&dqopt->dqonoff_mutex);
 out_fmt:
 	put_quota_format(fmt);
 
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index ebb2c417912..11f0c06316d 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -20,6 +20,7 @@
 #include <linux/ramfs.h>
 #include <linux/pagevec.h>
 #include <linux/mman.h>
+#include <linux/sched.h>
 
 #include <asm/uaccess.h>
 #include "internal.h"
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index 77f5bb746bf..90622200b39 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -997,7 +997,7 @@ static int reiserfs_async_progress_wait(struct super_block *s)
 	DEFINE_WAIT(wait);
 	struct reiserfs_journal *j = SB_JOURNAL(s);
 	if (atomic_read(&j->j_async_throttle))
-		congestion_wait(WRITE, HZ / 10);
+		congestion_wait(BLK_RW_ASYNC, HZ / 10);
 	return 0;
 }
 
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index d3aeb061612..7adea74d6a8 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -24,7 +24,6 @@
 #include <linux/exportfs.h>
 #include <linux/quotaops.h>
 #include <linux/vfs.h>
-#include <linux/mnt_namespace.h>
 #include <linux/mount.h>
 #include <linux/namei.h>
 #include <linux/crc32.h>
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index f3d47d85684..6925b835a43 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -46,7 +46,6 @@
 #include <linux/reiserfs_acl.h>
 #include <asm/uaccess.h>
 #include <net/checksum.h>
-#include <linux/smp_lock.h>
 #include <linux/stat.h>
 #include <linux/quotaops.h>
 
diff --git a/fs/select.c b/fs/select.c
index d870237e42c..8084834e123 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -110,6 +110,7 @@ void poll_initwait(struct poll_wqueues *pwq)
 {
 	init_poll_funcptr(&pwq->pt, __pollwait);
 	pwq->polling_task = current;
+	pwq->triggered = 0;
 	pwq->error = 0;
 	pwq->table = NULL;
 	pwq->inline_index = 0;
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 3b52770f46f..cb5fc57e370 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -30,6 +30,7 @@
 #include <linux/fs.h>
 #include <linux/vfs.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/pagemap.h>
 #include <linux/init.h>
diff --git a/fs/sync.c b/fs/sync.c
index dd200025af8..3422ba61d86 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -112,8 +112,13 @@ restart:
 	mutex_unlock(&mutex);
 }
 
+/*
+ * sync everything.  Start out by waking pdflush, because that writes back
+ * all queues in parallel.
+ */
 SYSCALL_DEFINE0(sync)
 {
+	wakeup_pdflush(0);
 	sync_filesystems(0);
 	sync_filesystems(1);
 	if (unlikely(laptop_mode))
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index 9345806c885..2524714bece 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -171,6 +171,7 @@ static ssize_t write(struct file *file, const char __user *userbuf,
 	if (count > 0)
 		*off = offs + count;
 
+	kfree(temp);
 	return count;
 }
 
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index d88d0fac9fa..14f2d71ea3c 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -939,8 +939,10 @@ again:
 	/* Remove from old parent's list and insert into new parent's list. */
 	sysfs_unlink_sibling(sd);
 	sysfs_get(new_parent_sd);
+	drop_nlink(old_parent->d_inode);
 	sysfs_put(sd->s_parent);
 	sd->s_parent = new_parent_sd;
+	inc_nlink(new_parent->d_inode);
 	sysfs_link_sibling(sd);
 
  out_unlock:
diff --git a/fs/ubifs/io.c b/fs/ubifs/io.c
index bc5857199ec..762a7d6cec7 100644
--- a/fs/ubifs/io.c
+++ b/fs/ubifs/io.c
@@ -297,6 +297,7 @@ static enum hrtimer_restart wbuf_timer_callback_nolock(struct hrtimer *timer)
 {
 	struct ubifs_wbuf *wbuf = container_of(timer, struct ubifs_wbuf, timer);
 
+	dbg_io("jhead %d", wbuf->jhead);
 	wbuf->need_sync = 1;
 	wbuf->c->need_wbuf_sync = 1;
 	ubifs_wake_up_bgt(wbuf->c);
@@ -311,8 +312,12 @@ static void new_wbuf_timer_nolock(struct ubifs_wbuf *wbuf)
 {
 	ubifs_assert(!hrtimer_active(&wbuf->timer));
 
-	if (!ktime_to_ns(wbuf->softlimit))
+	if (wbuf->no_timer)
 		return;
+	dbg_io("set timer for jhead %d, %llu-%llu millisecs", wbuf->jhead,
+	       div_u64(ktime_to_ns(wbuf->softlimit), USEC_PER_SEC),
+	       div_u64(ktime_to_ns(wbuf->softlimit) + wbuf->delta,
+		       USEC_PER_SEC));
 	hrtimer_start_range_ns(&wbuf->timer, wbuf->softlimit, wbuf->delta,
 			       HRTIMER_MODE_REL);
 }
@@ -323,11 +328,8 @@ static void new_wbuf_timer_nolock(struct ubifs_wbuf *wbuf)
  */
 static void cancel_wbuf_timer_nolock(struct ubifs_wbuf *wbuf)
 {
-	/*
-	 * If the syncer is waiting for the lock (from the background thread's
-	 * context) and another task is changing write-buffer then the syncing
-	 * should be canceled.
-	 */
+	if (wbuf->no_timer)
+		return;
 	wbuf->need_sync = 0;
 	hrtimer_cancel(&wbuf->timer);
 }
@@ -349,8 +351,8 @@ int ubifs_wbuf_sync_nolock(struct ubifs_wbuf *wbuf)
 		/* Write-buffer is empty or not seeked */
 		return 0;
 
-	dbg_io("LEB %d:%d, %d bytes",
-	       wbuf->lnum, wbuf->offs, wbuf->used);
+	dbg_io("LEB %d:%d, %d bytes, jhead %d",
+	       wbuf->lnum, wbuf->offs, wbuf->used, wbuf->jhead);
 	ubifs_assert(!(c->vfs_sb->s_flags & MS_RDONLY));
 	ubifs_assert(!(wbuf->avail & 7));
 	ubifs_assert(wbuf->offs + c->min_io_size <= c->leb_size);
@@ -390,7 +392,7 @@ int ubifs_wbuf_sync_nolock(struct ubifs_wbuf *wbuf)
  * @offs: logical eraseblock offset to seek to
  * @dtype: data type
  *
- * This function targets the write buffer to logical eraseblock @lnum:@offs.
+ * This function targets the write-buffer to logical eraseblock @lnum:@offs.
  * The write-buffer is synchronized if it is not empty. Returns zero in case of
  * success and a negative error code in case of failure.
  */
@@ -399,7 +401,7 @@ int ubifs_wbuf_seek_nolock(struct ubifs_wbuf *wbuf, int lnum, int offs,
 {
 	const struct ubifs_info *c = wbuf->c;
 
-	dbg_io("LEB %d:%d", lnum, offs);
+	dbg_io("LEB %d:%d, jhead %d", lnum, offs, wbuf->jhead);
 	ubifs_assert(lnum >= 0 && lnum < c->leb_cnt);
 	ubifs_assert(offs >= 0 && offs <= c->leb_size);
 	ubifs_assert(offs % c->min_io_size == 0 && !(offs & 7));
@@ -506,9 +508,9 @@ int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len)
 	struct ubifs_info *c = wbuf->c;
 	int err, written, n, aligned_len = ALIGN(len, 8), offs;
 
-	dbg_io("%d bytes (%s) to wbuf at LEB %d:%d", len,
-	       dbg_ntype(((struct ubifs_ch *)buf)->node_type), wbuf->lnum,
-	       wbuf->offs + wbuf->used);
+	dbg_io("%d bytes (%s) to jhead %d wbuf at LEB %d:%d", len,
+	       dbg_ntype(((struct ubifs_ch *)buf)->node_type), wbuf->jhead,
+	       wbuf->lnum, wbuf->offs + wbuf->used);
 	ubifs_assert(len > 0 && wbuf->lnum >= 0 && wbuf->lnum < c->leb_cnt);
 	ubifs_assert(wbuf->offs >= 0 && wbuf->offs % c->min_io_size == 0);
 	ubifs_assert(!(wbuf->offs & 7) && wbuf->offs <= c->leb_size);
@@ -533,8 +535,8 @@ int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len)
 		memcpy(wbuf->buf + wbuf->used, buf, len);
 
 		if (aligned_len == wbuf->avail) {
-			dbg_io("flush wbuf to LEB %d:%d", wbuf->lnum,
-				wbuf->offs);
+			dbg_io("flush jhead %d wbuf to LEB %d:%d",
+			       wbuf->jhead, wbuf->lnum, wbuf->offs);
 			err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf,
 					    wbuf->offs, c->min_io_size,
 					    wbuf->dtype);
@@ -562,7 +564,8 @@ int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len)
 	 * minimal I/O unit. We have to fill and flush write-buffer and switch
 	 * to the next min. I/O unit.
 	 */
-	dbg_io("flush wbuf to LEB %d:%d", wbuf->lnum, wbuf->offs);
+	dbg_io("flush jhead %d wbuf to LEB %d:%d",
+	       wbuf->jhead, wbuf->lnum, wbuf->offs);
 	memcpy(wbuf->buf + wbuf->used, buf, wbuf->avail);
 	err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs,
 			    c->min_io_size, wbuf->dtype);
@@ -695,7 +698,8 @@ int ubifs_read_node_wbuf(struct ubifs_wbuf *wbuf, void *buf, int type, int len,
 	int err, rlen, overlap;
 	struct ubifs_ch *ch = buf;
 
-	dbg_io("LEB %d:%d, %s, length %d", lnum, offs, dbg_ntype(type), len);
+	dbg_io("LEB %d:%d, %s, length %d, jhead %d", lnum, offs,
+	       dbg_ntype(type), len, wbuf->jhead);
 	ubifs_assert(wbuf && lnum >= 0 && lnum < c->leb_cnt && offs >= 0);
 	ubifs_assert(!(offs & 7) && offs < c->leb_size);
 	ubifs_assert(type >= 0 && type < UBIFS_NODE_TYPES_CNT);
@@ -819,13 +823,12 @@ out:
  * @c: UBIFS file-system description object
  * @wbuf: write-buffer to initialize
  *
- * This function initializes write buffer. Returns zero in case of success
+ * This function initializes write-buffer. Returns zero in case of success
  * %-ENOMEM in case of failure.
  */
 int ubifs_wbuf_init(struct ubifs_info *c, struct ubifs_wbuf *wbuf)
 {
 	size_t size;
-	ktime_t hardlimit;
 
 	wbuf->buf = kmalloc(c->min_io_size, GFP_KERNEL);
 	if (!wbuf->buf)
@@ -851,22 +854,16 @@ int ubifs_wbuf_init(struct ubifs_info *c, struct ubifs_wbuf *wbuf)
 
 	hrtimer_init(&wbuf->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	wbuf->timer.function = wbuf_timer_callback_nolock;
-	/*
-	 * Make write-buffer soft limit to be 20% of the hard limit. The
-	 * write-buffer timer is allowed to expire any time between the soft
-	 * and hard limits.
-	 */
-	hardlimit = ktime_set(DEFAULT_WBUF_TIMEOUT_SECS, 0);
-	wbuf->delta = (DEFAULT_WBUF_TIMEOUT_SECS * NSEC_PER_SEC) * 2 / 10;
-	wbuf->softlimit = ktime_sub_ns(hardlimit, wbuf->delta);
-	hrtimer_set_expires_range_ns(&wbuf->timer,  wbuf->softlimit,
-				     wbuf->delta);
+	wbuf->softlimit = ktime_set(WBUF_TIMEOUT_SOFTLIMIT, 0);
+	wbuf->delta = WBUF_TIMEOUT_HARDLIMIT - WBUF_TIMEOUT_SOFTLIMIT;
+	wbuf->delta *= 1000000000ULL;
+	ubifs_assert(wbuf->delta <= ULONG_MAX);
 	return 0;
 }
 
 /**
  * ubifs_wbuf_add_ino_nolock - add an inode number into the wbuf inode array.
- * @wbuf: the write-buffer whereto add
+ * @wbuf: the write-buffer where to add
  * @inum: the inode number
  *
  * This function adds an inode number to the inode array of the write-buffer.
diff --git a/fs/ubifs/ioctl.c b/fs/ubifs/ioctl.c
index 6db7a6be6c9..8aacd64957a 100644
--- a/fs/ubifs/ioctl.c
+++ b/fs/ubifs/ioctl.c
@@ -25,7 +25,6 @@
 /* This file implements EXT2-compatible extended attribute ioctl() calls */
 
 #include <linux/compat.h>
-#include <linux/smp_lock.h>
 #include <linux/mount.h>
 #include "ubifs.h"
 
diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c
index 805605250f1..e5f6cf8a115 100644
--- a/fs/ubifs/recovery.c
+++ b/fs/ubifs/recovery.c
@@ -53,6 +53,25 @@ static int is_empty(void *buf, int len)
 }
 
 /**
+ * first_non_ff - find offset of the first non-0xff byte.
+ * @buf: buffer to search in
+ * @len: length of buffer
+ *
+ * This function returns offset of the first non-0xff byte in @buf or %-1 if
+ * the buffer contains only 0xff bytes.
+ */
+static int first_non_ff(void *buf, int len)
+{
+	uint8_t *p = buf;
+	int i;
+
+	for (i = 0; i < len; i++)
+		if (*p++ != 0xff)
+			return i;
+	return -1;
+}
+
+/**
  * get_master_node - get the last valid master node allowing for corruption.
  * @c: UBIFS file-system description object
  * @lnum: LEB number
@@ -357,11 +376,7 @@ static int is_last_write(const struct ubifs_info *c, void *buf, int offs)
 	empty_offs = ALIGN(offs + 1, c->min_io_size);
 	check_len = c->leb_size - empty_offs;
 	p = buf + empty_offs - offs;
-
-	for (; check_len > 0; check_len--)
-		if (*p++ != 0xff)
-			return 0;
-	return 1;
+	return is_empty(p, check_len);
 }
 
 /**
@@ -543,8 +558,8 @@ static int drop_incomplete_group(struct ubifs_scan_leb *sleb, int *offs)
  *
  * This function does a scan of a LEB, but caters for errors that might have
  * been caused by the unclean unmount from which we are attempting to recover.
- *
- * This function returns %0 on success and a negative error code on failure.
+ * Returns %0 in case of success, %-EUCLEAN if an unrecoverable corruption is
+ * found, and a negative error code in case of failure.
  */
 struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum,
 					 int offs, void *sbuf, int grouped)
@@ -643,7 +658,8 @@ struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum,
 			goto corrupted;
 		default:
 			dbg_err("unknown");
-			goto corrupted;
+			err = -EINVAL;
+			goto error;
 		}
 	}
 
@@ -652,8 +668,13 @@ struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum,
 			clean_buf(c, &buf, lnum, &offs, &len);
 			need_clean = 1;
 		} else {
-			ubifs_err("corrupt empty space at LEB %d:%d",
-				  lnum, offs);
+			int corruption = first_non_ff(buf, len);
+
+			ubifs_err("corrupt empty space LEB %d:%d, corruption "
+				  "starts at %d", lnum, offs, corruption);
+			/* Make sure we dump interesting non-0xFF data */
+			offs = corruption;
+			buf += corruption;
 			goto corrupted;
 		}
 	}
@@ -813,7 +834,7 @@ struct ubifs_scan_leb *ubifs_recover_log_leb(struct ubifs_info *c, int lnum,
 static int recover_head(const struct ubifs_info *c, int lnum, int offs,
 			void *sbuf)
 {
-	int len, err, need_clean = 0;
+	int len, err;
 
 	if (c->min_io_size > 1)
 		len = c->min_io_size;
@@ -827,19 +848,7 @@ static int recover_head(const struct ubifs_info *c, int lnum, int offs,
 
 	/* Read at the head location and check it is empty flash */
 	err = ubi_read(c->ubi, lnum, sbuf, offs, len);
-	if (err)
-		need_clean = 1;
-	else {
-		uint8_t *p = sbuf;
-
-		while (len--)
-			if (*p++ != 0xff) {
-				need_clean = 1;
-				break;
-			}
-	}
-
-	if (need_clean) {
+	if (err || !is_empty(sbuf, len)) {
 		dbg_rcvry("cleaning head at %d:%d", lnum, offs);
 		if (offs == 0)
 			return ubifs_leb_unmap(c, lnum);
diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c
index 11cc80125a4..2970500f32d 100644
--- a/fs/ubifs/replay.c
+++ b/fs/ubifs/replay.c
@@ -837,9 +837,10 @@ static int replay_log_leb(struct ubifs_info *c, int lnum, int offs, void *sbuf)
 
 	dbg_mnt("replay log LEB %d:%d", lnum, offs);
 	sleb = ubifs_scan(c, lnum, offs, sbuf);
-	if (IS_ERR(sleb)) {
-		if (c->need_recovery)
-			sleb = ubifs_recover_log_leb(c, lnum, offs, sbuf);
+	if (IS_ERR(sleb) ) {
+		if (PTR_ERR(sleb) != -EUCLEAN || !c->need_recovery)
+			return PTR_ERR(sleb);
+		sleb = ubifs_recover_log_leb(c, lnum, offs, sbuf);
 		if (IS_ERR(sleb))
 			return PTR_ERR(sleb);
 	}
@@ -957,7 +958,7 @@ out:
 	return err;
 
 out_dump:
-	ubifs_err("log error detected while replying the log at LEB %d:%d",
+	ubifs_err("log error detected while replaying the log at LEB %d:%d",
 		  lnum, offs + snod->offs);
 	dbg_dump_node(c, snod->node);
 	ubifs_scan_destroy(sleb);
diff --git a/fs/ubifs/scan.c b/fs/ubifs/scan.c
index 0ed82479b44..892ebfee4fe 100644
--- a/fs/ubifs/scan.c
+++ b/fs/ubifs/scan.c
@@ -238,12 +238,12 @@ void ubifs_scanned_corruption(const struct ubifs_info *c, int lnum, int offs,
 {
 	int len;
 
-	ubifs_err("corrupted data at LEB %d:%d", lnum, offs);
+	ubifs_err("corruption at LEB %d:%d", lnum, offs);
 	if (dbg_failure_mode)
 		return;
 	len = c->leb_size - offs;
-	if (len > 4096)
-		len = 4096;
+	if (len > 8192)
+		len = 8192;
 	dbg_err("first %d bytes from LEB %d:%d", len, lnum, offs);
 	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 4, buf, len, 1);
 }
@@ -256,7 +256,9 @@ void ubifs_scanned_corruption(const struct ubifs_info *c, int lnum, int offs,
  * @sbuf: scan buffer (must be c->leb_size)
  *
  * This function scans LEB number @lnum and returns complete information about
- * its contents. Returns an error code in case of failure.
+ * its contents. Returns the scaned information in case of success and,
+ * %-EUCLEAN if the LEB neads recovery, and other negative error codes in case
+ * of failure.
  */
 struct ubifs_scan_leb *ubifs_scan(const struct ubifs_info *c, int lnum,
 				  int offs, void *sbuf)
@@ -279,7 +281,6 @@ struct ubifs_scan_leb *ubifs_scan(const struct ubifs_info *c, int lnum,
 		cond_resched();
 
 		ret = ubifs_scan_a_node(c, buf, len, lnum, offs, 0);
-
 		if (ret > 0) {
 			/* Padding bytes or a valid padding node */
 			offs += ret;
@@ -304,7 +305,8 @@ struct ubifs_scan_leb *ubifs_scan(const struct ubifs_info *c, int lnum,
 			goto corrupted;
 		default:
 			dbg_err("unknown");
-			goto corrupted;
+			err = -EINVAL;
+			goto error;
 		}
 
 		err = ubifs_add_snod(c, sleb, buf, offs);
@@ -317,8 +319,10 @@ struct ubifs_scan_leb *ubifs_scan(const struct ubifs_info *c, int lnum,
 		len -= node_len;
 	}
 
-	if (offs % c->min_io_size)
-		goto corrupted;
+	if (offs % c->min_io_size) {
+		ubifs_err("empty space starts at non-aligned offset %d", offs);
+		goto corrupted;;
+	}
 
 	ubifs_end_scan(c, sleb, lnum, offs);
 
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 79fad43f3c5..26d2e0d8046 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -797,7 +797,7 @@ static int alloc_wbufs(struct ubifs_info *c)
 	 * does not need to be synchronized by timer.
 	 */
 	c->jheads[GCHD].wbuf.dtype = UBI_LONGTERM;
-	c->jheads[GCHD].wbuf.softlimit = ktime_set(0, 0);
+	c->jheads[GCHD].wbuf.no_timer = 1;
 
 	return 0;
 }
@@ -986,7 +986,7 @@ static int ubifs_parse_options(struct ubifs_info *c, char *options,
 		switch (token) {
 		/*
 		 * %Opt_fast_unmount and %Opt_norm_unmount options are ignored.
-		 * We accepte them in order to be backware-compatible. But this
+		 * We accept them in order to be backward-compatible. But this
 		 * should be removed at some point.
 		 */
 		case Opt_fast_unmount:
@@ -1287,6 +1287,9 @@ static int mount_ubifs(struct ubifs_info *c)
 	if (err)
 		goto out_journal;
 
+	/* Calculate 'min_idx_lebs' after journal replay */
+	c->min_idx_lebs = ubifs_calc_min_idx_lebs(c);
+
 	err = ubifs_mount_orphans(c, c->need_recovery, mounted_read_only);
 	if (err)
 		goto out_orphans;
@@ -1754,10 +1757,8 @@ static void ubifs_put_super(struct super_block *sb)
 
 		/* Synchronize write-buffers */
 		if (c->jheads)
-			for (i = 0; i < c->jhead_cnt; i++) {
+			for (i = 0; i < c->jhead_cnt; i++)
 				ubifs_wbuf_sync(&c->jheads[i].wbuf);
-				hrtimer_cancel(&c->jheads[i].wbuf.timer);
-			}
 
 		/*
 		 * On fatal errors c->ro_media is set to 1, in which case we do
@@ -1975,7 +1976,8 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
 	err  = bdi_init(&c->bdi);
 	if (err)
 		goto out_close;
-	err = bdi_register(&c->bdi, NULL, "ubifs");
+	err = bdi_register(&c->bdi, NULL, "ubifs_%d_%d",
+			   c->vi.ubi_num, c->vi.vol_id);
 	if (err)
 		goto out_bdi;
 
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 1bf01d82006..a2934909442 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -95,8 +95,9 @@
  */
 #define BGT_NAME_PATTERN "ubifs_bgt%d_%d"
 
-/* Default write-buffer synchronization timeout in seconds */
-#define DEFAULT_WBUF_TIMEOUT_SECS 5
+/* Write-buffer synchronization timeout interval in seconds */
+#define WBUF_TIMEOUT_SOFTLIMIT 3
+#define WBUF_TIMEOUT_HARDLIMIT 5
 
 /* Maximum possible inode number (only 32-bit inodes are supported now) */
 #define MAX_INUM 0xFFFFFFFF
@@ -654,7 +655,8 @@ typedef int (*ubifs_lpt_scan_callback)(struct ubifs_info *c,
  * @delta: hard and soft timeouts delta (the timer expire inteval is @softlimit
  *         and @softlimit + @delta)
  * @timer: write-buffer timer
- * @need_sync: it is set if its timer expired and needs sync
+ * @no_timer: non-zero if this write-buffer does not have a timer
+ * @need_sync: non-zero if the timer expired and the wbuf needs sync'ing
  * @next_ino: points to the next position of the following inode number
  * @inodes: stores the inode numbers of the nodes which are in wbuf
  *
@@ -683,7 +685,8 @@ struct ubifs_wbuf {
 	ktime_t softlimit;
 	unsigned long long delta;
 	struct hrtimer timer;
-	int need_sync;
+	unsigned int no_timer:1;
+	unsigned int need_sync:1;
 	int next_ino;
 	ino_t *inodes;
 };
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 6832135159b..9d1b8c2e6c4 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -1087,11 +1087,23 @@ static int udf_load_vat(struct super_block *sb, int p_index, int type1_index)
 	struct udf_inode_info *vati;
 	uint32_t pos;
 	struct virtualAllocationTable20 *vat20;
+	sector_t blocks = sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits;
 
 	/* VAT file entry is in the last recorded block */
 	ino.partitionReferenceNum = type1_index;
 	ino.logicalBlockNum = sbi->s_last_block - map->s_partition_root;
 	sbi->s_vat_inode = udf_iget(sb, &ino);
+	if (!sbi->s_vat_inode &&
+	    sbi->s_last_block != blocks - 1) {
+		printk(KERN_NOTICE "UDF-fs: Failed to read VAT inode from the"
+		       " last recorded block (%lu), retrying with the last "
+		       "block of the device (%lu).\n",
+		       (unsigned long)sbi->s_last_block,
+		       (unsigned long)blocks - 1);
+		ino.partitionReferenceNum = type1_index;
+		ino.logicalBlockNum = blocks - 1 - map->s_partition_root;
+		sbi->s_vat_inode = udf_iget(sb, &ino);
+	}
 	if (!sbi->s_vat_inode)
 		return 1;
 
diff --git a/fs/xfs/linux-2.6/kmem.c b/fs/xfs/linux-2.6/kmem.c
index 1cd3b55ee3d..2d3f90afe5f 100644
--- a/fs/xfs/linux-2.6/kmem.c
+++ b/fs/xfs/linux-2.6/kmem.c
@@ -53,7 +53,7 @@ kmem_alloc(size_t size, unsigned int __nocast flags)
 			printk(KERN_ERR "XFS: possible memory allocation "
 					"deadlock in %s (mode:0x%x)\n",
 					__func__, lflags);
-		congestion_wait(WRITE, HZ/50);
+		congestion_wait(BLK_RW_ASYNC, HZ/50);
 	} while (1);
 }
 
@@ -130,7 +130,7 @@ kmem_zone_alloc(kmem_zone_t *zone, unsigned int __nocast flags)
 			printk(KERN_ERR "XFS: possible memory allocation "
 					"deadlock in %s (mode:0x%x)\n",
 					__func__, lflags);
-		congestion_wait(WRITE, HZ/50);
+		congestion_wait(BLK_RW_ASYNC, HZ/50);
 	} while (1);
 }
 
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 7ec89fc05b2..aecf2519db7 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -1268,6 +1268,14 @@ xfs_vm_writepage(
 	if (!page_has_buffers(page))
 		create_empty_buffers(page, 1 << inode->i_blkbits, 0);
 
+
+	/*
+	 *  VM calculation for nr_to_write seems off.  Bump it way
+	 *  up, this gets simple streaming writes zippy again.
+	 *  To be reviewed again after Jens' writeback changes.
+	 */
+	wbc->nr_to_write *= 4;
+
 	/*
 	 * Convert delayed allocate, unwritten or unmapped space
 	 * to real space and flush out to disk.
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 1418b916fc2..965df1227d6 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -412,7 +412,7 @@ _xfs_buf_lookup_pages(
 
 			XFS_STATS_INC(xb_page_retries);
 			xfsbufd_wakeup(0, gfp_mask);
-			congestion_wait(WRITE, HZ/50);
+			congestion_wait(BLK_RW_ASYNC, HZ/50);
 			goto retry;
 		}
 
@@ -770,7 +770,7 @@ xfs_buf_associate_memory(
 	bp->b_pages = NULL;
 	bp->b_addr = mem;
 
-	rval = _xfs_buf_get_pages(bp, page_count, 0);
+	rval = _xfs_buf_get_pages(bp, page_count, XBF_DONT_BLOCK);
 	if (rval)
 		return rval;
 
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index f4e25544157..0542fd50764 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -41,7 +41,6 @@
 #include "xfs_ioctl.h"
 
 #include <linux/dcache.h>
-#include <linux/smp_lock.h>
 
 static struct vm_operations_struct xfs_file_vm_ops;
 
diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c
index 0882d166239..eafcc7c1870 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl32.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl32.c
@@ -619,7 +619,7 @@ xfs_file_compat_ioctl(
 	case XFS_IOC_GETVERSION_32:
 		cmd = _NATIVE_IOC(cmd, long);
 		return xfs_file_ioctl(filp, cmd, p);
-	case XFS_IOC_SWAPEXT: {
+	case XFS_IOC_SWAPEXT_32: {
 		struct xfs_swapext	  sxp;
 		struct compat_xfs_swapext __user *sxu = arg;
 
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 58973bb4603..8070b34cc28 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -680,8 +680,8 @@ xfs_vn_fiemap(
 	else
 		bm.bmv_length = BTOBB(length);
 
-	/* our formatter will tell xfs_getbmap when to stop. */
-	bm.bmv_count = MAXEXTNUM;
+	/* We add one because in getbmap world count includes the header */
+	bm.bmv_count = fieinfo->fi_extents_max + 1;
 	bm.bmv_iflags = BMV_IF_PREALLOC;
 	if (fieinfo->fi_flags & FIEMAP_FLAG_XATTR)
 		bm.bmv_iflags |= BMV_IF_ATTRFORK;
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index b619d6b8ca4..98ef624d9ba 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -708,6 +708,16 @@ xfs_reclaim_inode(
 	return 0;
 }
 
+void
+__xfs_inode_set_reclaim_tag(
+	struct xfs_perag	*pag,
+	struct xfs_inode	*ip)
+{
+	radix_tree_tag_set(&pag->pag_ici_root,
+			   XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino),
+			   XFS_ICI_RECLAIM_TAG);
+}
+
 /*
  * We set the inode flag atomically with the radix tree tag.
  * Once we get tag lookups on the radix tree, this inode flag
@@ -722,8 +732,7 @@ xfs_inode_set_reclaim_tag(
 
 	read_lock(&pag->pag_ici_lock);
 	spin_lock(&ip->i_flags_lock);
-	radix_tree_tag_set(&pag->pag_ici_root,
-			XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
+	__xfs_inode_set_reclaim_tag(pag, ip);
 	__xfs_iflags_set(ip, XFS_IRECLAIMABLE);
 	spin_unlock(&ip->i_flags_lock);
 	read_unlock(&pag->pag_ici_lock);
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index 2a10301c99c..59120602588 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -48,6 +48,7 @@ int xfs_reclaim_inode(struct xfs_inode *ip, int locked, int sync_mode);
 int xfs_reclaim_inodes(struct xfs_mount *mp, int mode);
 
 void xfs_inode_set_reclaim_tag(struct xfs_inode *ip);
+void __xfs_inode_set_reclaim_tag(struct xfs_perag *pag, struct xfs_inode *ip);
 void xfs_inode_clear_reclaim_tag(struct xfs_inode *ip);
 void __xfs_inode_clear_reclaim_tag(struct xfs_mount *mp, struct xfs_perag *pag,
 				struct xfs_inode *ip);
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index db15feb906f..4ece1906bd4 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -2010,7 +2010,9 @@ xfs_attr_rmtval_get(xfs_da_args_t *args)
 			dblkno = XFS_FSB_TO_DADDR(mp, map[i].br_startblock);
 			blkcnt = XFS_FSB_TO_BB(mp, map[i].br_blockcount);
 			error = xfs_read_buf(mp, mp->m_ddev_targp, dblkno,
-					     blkcnt, XFS_BUF_LOCK, &bp);
+					     blkcnt,
+					     XFS_BUF_LOCK | XBF_DONT_BLOCK,
+					     &bp);
 			if (error)
 				return(error);
 
@@ -2141,8 +2143,8 @@ xfs_attr_rmtval_set(xfs_da_args_t *args)
 		dblkno = XFS_FSB_TO_DADDR(mp, map.br_startblock),
 		blkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount);
 
-		bp = xfs_buf_get_flags(mp->m_ddev_targp, dblkno,
-							blkcnt, XFS_BUF_LOCK);
+		bp = xfs_buf_get_flags(mp->m_ddev_targp, dblkno, blkcnt,
+				       XFS_BUF_LOCK | XBF_DONT_BLOCK);
 		ASSERT(bp);
 		ASSERT(!XFS_BUF_GETERROR(bp));
 
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 7928b9983c1..8ee5b5a76a2 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -6009,7 +6009,7 @@ xfs_getbmap(
 	 */
 	error = ENOMEM;
 	subnex = 16;
-	map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL);
+	map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL | KM_NOFS);
 	if (!map)
 		goto out_unlock_ilock;
 
diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c
index e9df9957482..26717388acf 100644
--- a/fs/xfs/xfs_btree.c
+++ b/fs/xfs/xfs_btree.c
@@ -120,8 +120,8 @@ xfs_btree_check_sblock(
 			XFS_RANDOM_BTREE_CHECK_SBLOCK))) {
 		if (bp)
 			xfs_buftrace("SBTREE ERROR", bp);
-		XFS_ERROR_REPORT("xfs_btree_check_sblock", XFS_ERRLEVEL_LOW,
-				 cur->bc_mp);
+		XFS_CORRUPTION_ERROR("xfs_btree_check_sblock",
+			XFS_ERRLEVEL_LOW, cur->bc_mp, block);
 		return XFS_ERROR(EFSCORRUPTED);
 	}
 	return 0;
diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c
index 9ff6e57a507..2847bbc1c53 100644
--- a/fs/xfs/xfs_da_btree.c
+++ b/fs/xfs/xfs_da_btree.c
@@ -2201,7 +2201,7 @@ kmem_zone_t *xfs_dabuf_zone;		/* dabuf zone */
 xfs_da_state_t *
 xfs_da_state_alloc(void)
 {
-	return kmem_zone_zalloc(xfs_da_state_zone, KM_SLEEP);
+	return kmem_zone_zalloc(xfs_da_state_zone, KM_NOFS);
 }
 
 /*
@@ -2261,9 +2261,9 @@ xfs_da_buf_make(int nbuf, xfs_buf_t **bps, inst_t *ra)
 	int		off;
 
 	if (nbuf == 1)
-		dabuf = kmem_zone_alloc(xfs_dabuf_zone, KM_SLEEP);
+		dabuf = kmem_zone_alloc(xfs_dabuf_zone, KM_NOFS);
 	else
-		dabuf = kmem_alloc(XFS_DA_BUF_SIZE(nbuf), KM_SLEEP);
+		dabuf = kmem_alloc(XFS_DA_BUF_SIZE(nbuf), KM_NOFS);
 	dabuf->dirty = 0;
 #ifdef XFS_DABUF_DEBUG
 	dabuf->ra = ra;
diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c
index c657bec6d95..bb1d58eb398 100644
--- a/fs/xfs/xfs_dir2.c
+++ b/fs/xfs/xfs_dir2.c
@@ -256,7 +256,7 @@ xfs_dir_cilookup_result(
 					!(args->op_flags & XFS_DA_OP_CILOOKUP))
 		return EEXIST;
 
-	args->value = kmem_alloc(len, KM_MAYFAIL);
+	args->value = kmem_alloc(len, KM_NOFS | KM_MAYFAIL);
 	if (!args->value)
 		return ENOMEM;
 
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index cbd451bb484..2d0b3e1da9e 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -167,17 +167,25 @@ xfs_growfs_data_private(
 	new = nb - mp->m_sb.sb_dblocks;
 	oagcount = mp->m_sb.sb_agcount;
 	if (nagcount > oagcount) {
+		void *new_perag, *old_perag;
+
 		xfs_filestream_flush(mp);
+
+		new_perag = kmem_zalloc(sizeof(xfs_perag_t) * nagcount,
+					KM_MAYFAIL);
+		if (!new_perag)
+			return XFS_ERROR(ENOMEM);
+
 		down_write(&mp->m_peraglock);
-		mp->m_perag = kmem_realloc(mp->m_perag,
-			sizeof(xfs_perag_t) * nagcount,
-			sizeof(xfs_perag_t) * oagcount,
-			KM_SLEEP);
-		memset(&mp->m_perag[oagcount], 0,
-			(nagcount - oagcount) * sizeof(xfs_perag_t));
+		memcpy(new_perag, mp->m_perag, sizeof(xfs_perag_t) * oagcount);
+		old_perag = mp->m_perag;
+		mp->m_perag = new_perag;
+
 		mp->m_flags |= XFS_MOUNT_32BITINODES;
 		nagimax = xfs_initialize_perag(mp, nagcount);
 		up_write(&mp->m_peraglock);
+
+		kmem_free(old_perag);
 	}
 	tp = xfs_trans_alloc(mp, XFS_TRANS_GROWFS);
 	tp->t_flags |= XFS_TRANS_RESERVE;
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 5fcec6f020a..ecbf8b4d2e2 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -64,6 +64,10 @@ xfs_inode_alloc(
 	ip = kmem_zone_alloc(xfs_inode_zone, KM_SLEEP);
 	if (!ip)
 		return NULL;
+	if (inode_init_always(mp->m_super, VFS_I(ip))) {
+		kmem_zone_free(xfs_inode_zone, ip);
+		return NULL;
+	}
 
 	ASSERT(atomic_read(&ip->i_iocount) == 0);
 	ASSERT(atomic_read(&ip->i_pincount) == 0);
@@ -105,17 +109,6 @@ xfs_inode_alloc(
 #ifdef XFS_DIR2_TRACE
 	ip->i_dir_trace = ktrace_alloc(XFS_DIR2_KTRACE_SIZE, KM_NOFS);
 #endif
-	/*
-	* Now initialise the VFS inode. We do this after the xfs_inode
-	* initialisation as internal failures will result in ->destroy_inode
-	* being called and that will pass down through the reclaim path and
-	* free the XFS inode. This path requires the XFS inode to already be
-	* initialised. Hence if this call fails, the xfs_inode has already
-	* been freed and we should not reference it at all in the error
-	* handling.
-	*/
-	if (!inode_init_always(mp->m_super, VFS_I(ip)))
-		return NULL;
 
 	/* prevent anyone from using this yet */
 	VFS_I(ip)->i_state = I_NEW|I_LOCK;
@@ -123,6 +116,71 @@ xfs_inode_alloc(
 	return ip;
 }
 
+STATIC void
+xfs_inode_free(
+	struct xfs_inode	*ip)
+{
+	switch (ip->i_d.di_mode & S_IFMT) {
+	case S_IFREG:
+	case S_IFDIR:
+	case S_IFLNK:
+		xfs_idestroy_fork(ip, XFS_DATA_FORK);
+		break;
+	}
+
+	if (ip->i_afp)
+		xfs_idestroy_fork(ip, XFS_ATTR_FORK);
+
+#ifdef XFS_INODE_TRACE
+	ktrace_free(ip->i_trace);
+#endif
+#ifdef XFS_BMAP_TRACE
+	ktrace_free(ip->i_xtrace);
+#endif
+#ifdef XFS_BTREE_TRACE
+	ktrace_free(ip->i_btrace);
+#endif
+#ifdef XFS_RW_TRACE
+	ktrace_free(ip->i_rwtrace);
+#endif
+#ifdef XFS_ILOCK_TRACE
+	ktrace_free(ip->i_lock_trace);
+#endif
+#ifdef XFS_DIR2_TRACE
+	ktrace_free(ip->i_dir_trace);
+#endif
+
+	if (ip->i_itemp) {
+		/*
+		 * Only if we are shutting down the fs will we see an
+		 * inode still in the AIL. If it is there, we should remove
+		 * it to prevent a use-after-free from occurring.
+		 */
+		xfs_log_item_t	*lip = &ip->i_itemp->ili_item;
+		struct xfs_ail	*ailp = lip->li_ailp;
+
+		ASSERT(((lip->li_flags & XFS_LI_IN_AIL) == 0) ||
+				       XFS_FORCED_SHUTDOWN(ip->i_mount));
+		if (lip->li_flags & XFS_LI_IN_AIL) {
+			spin_lock(&ailp->xa_lock);
+			if (lip->li_flags & XFS_LI_IN_AIL)
+				xfs_trans_ail_delete(ailp, lip);
+			else
+				spin_unlock(&ailp->xa_lock);
+		}
+		xfs_inode_item_destroy(ip);
+		ip->i_itemp = NULL;
+	}
+
+	/* asserts to verify all state is correct here */
+	ASSERT(atomic_read(&ip->i_iocount) == 0);
+	ASSERT(atomic_read(&ip->i_pincount) == 0);
+	ASSERT(!spin_is_locked(&ip->i_flags_lock));
+	ASSERT(completion_done(&ip->i_flush));
+
+	kmem_zone_free(xfs_inode_zone, ip);
+}
+
 /*
  * Check the validity of the inode we just found it the cache
  */
@@ -133,80 +191,82 @@ xfs_iget_cache_hit(
 	int			flags,
 	int			lock_flags) __releases(pag->pag_ici_lock)
 {
+	struct inode		*inode = VFS_I(ip);
 	struct xfs_mount	*mp = ip->i_mount;
-	int			error = EAGAIN;
+	int			error;
+
+	spin_lock(&ip->i_flags_lock);
 
 	/*
-	 * If INEW is set this inode is being set up
-	 * If IRECLAIM is set this inode is being torn down
-	 * Pause and try again.
+	 * If we are racing with another cache hit that is currently
+	 * instantiating this inode or currently recycling it out of
+	 * reclaimabe state, wait for the initialisation to complete
+	 * before continuing.
+	 *
+	 * XXX(hch): eventually we should do something equivalent to
+	 *	     wait_on_inode to wait for these flags to be cleared
+	 *	     instead of polling for it.
 	 */
-	if (xfs_iflags_test(ip, (XFS_INEW|XFS_IRECLAIM))) {
+	if (ip->i_flags & (XFS_INEW|XFS_IRECLAIM)) {
 		XFS_STATS_INC(xs_ig_frecycle);
+		error = EAGAIN;
 		goto out_error;
 	}
 
-	/* If IRECLAIMABLE is set, we've torn down the vfs inode part */
-	if (xfs_iflags_test(ip, XFS_IRECLAIMABLE)) {
-
-		/*
-		 * If lookup is racing with unlink, then we should return an
-		 * error immediately so we don't remove it from the reclaim
-		 * list and potentially leak the inode.
-		 */
-		if ((ip->i_d.di_mode == 0) && !(flags & XFS_IGET_CREATE)) {
-			error = ENOENT;
-			goto out_error;
-		}
+	/*
+	 * If lookup is racing with unlink return an error immediately.
+	 */
+	if (ip->i_d.di_mode == 0 && !(flags & XFS_IGET_CREATE)) {
+		error = ENOENT;
+		goto out_error;
+	}
 
+	/*
+	 * If IRECLAIMABLE is set, we've torn down the VFS inode already.
+	 * Need to carefully get it back into useable state.
+	 */
+	if (ip->i_flags & XFS_IRECLAIMABLE) {
 		xfs_itrace_exit_tag(ip, "xfs_iget.alloc");
 
 		/*
-		 * We need to re-initialise the VFS inode as it has been
-		 * 'freed' by the VFS. Do this here so we can deal with
-		 * errors cleanly, then tag it so it can be set up correctly
-		 * later.
+		 * We need to set XFS_INEW atomically with clearing the
+		 * reclaimable tag so that we do have an indicator of the
+		 * inode still being initialized.
 		 */
-		if (!inode_init_always(mp->m_super, VFS_I(ip))) {
-			error = ENOMEM;
-			goto out_error;
-		}
+		ip->i_flags |= XFS_INEW;
+		ip->i_flags &= ~XFS_IRECLAIMABLE;
+		__xfs_inode_clear_reclaim_tag(mp, pag, ip);
 
-		/*
-		 * We must set the XFS_INEW flag before clearing the
-		 * XFS_IRECLAIMABLE flag so that if a racing lookup does
-		 * not find the XFS_IRECLAIMABLE above but has the igrab()
-		 * below succeed we can safely check XFS_INEW to detect
-		 * that this inode is still being initialised.
-		 */
-		xfs_iflags_set(ip, XFS_INEW);
-		xfs_iflags_clear(ip, XFS_IRECLAIMABLE);
+		spin_unlock(&ip->i_flags_lock);
+		read_unlock(&pag->pag_ici_lock);
 
-		/* clear the radix tree reclaim flag as well. */
-		__xfs_inode_clear_reclaim_tag(mp, pag, ip);
-	} else if (!igrab(VFS_I(ip))) {
+		error = -inode_init_always(mp->m_super, inode);
+		if (error) {
+			/*
+			 * Re-initializing the inode failed, and we are in deep
+			 * trouble.  Try to re-add it to the reclaim list.
+			 */
+			read_lock(&pag->pag_ici_lock);
+			spin_lock(&ip->i_flags_lock);
+
+			ip->i_flags &= ~XFS_INEW;
+			ip->i_flags |= XFS_IRECLAIMABLE;
+			__xfs_inode_set_reclaim_tag(pag, ip);
+			goto out_error;
+		}
+		inode->i_state = I_LOCK|I_NEW;
+	} else {
 		/* If the VFS inode is being torn down, pause and try again. */
-		XFS_STATS_INC(xs_ig_frecycle);
-		goto out_error;
-	} else if (xfs_iflags_test(ip, XFS_INEW)) {
-		/*
-		 * We are racing with another cache hit that is
-		 * currently recycling this inode out of the XFS_IRECLAIMABLE
-		 * state. Wait for the initialisation to complete before
-		 * continuing.
-		 */
-		wait_on_inode(VFS_I(ip));
-	}
+		if (!igrab(inode)) {
+			error = EAGAIN;
+			goto out_error;
+		}
 
-	if (ip->i_d.di_mode == 0 && !(flags & XFS_IGET_CREATE)) {
-		error = ENOENT;
-		iput(VFS_I(ip));
-		goto out_error;
+		/* We've got a live one. */
+		spin_unlock(&ip->i_flags_lock);
+		read_unlock(&pag->pag_ici_lock);
 	}
 
-	/* We've got a live one. */
-	read_unlock(&pag->pag_ici_lock);
-
 	if (lock_flags != 0)
 		xfs_ilock(ip, lock_flags);
 
@@ -216,6 +276,7 @@ xfs_iget_cache_hit(
 	return 0;
 
 out_error:
+	spin_unlock(&ip->i_flags_lock);
 	read_unlock(&pag->pag_ici_lock);
 	return error;
 }
@@ -299,7 +360,8 @@ out_preload_end:
 	if (lock_flags)
 		xfs_iunlock(ip, lock_flags);
 out_destroy:
-	xfs_destroy_inode(ip);
+	__destroy_inode(VFS_I(ip));
+	xfs_inode_free(ip);
 	return error;
 }
 
@@ -504,62 +566,7 @@ xfs_ireclaim(
 	xfs_qm_dqdetach(ip);
 	xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
 
-	switch (ip->i_d.di_mode & S_IFMT) {
-	case S_IFREG:
-	case S_IFDIR:
-	case S_IFLNK:
-		xfs_idestroy_fork(ip, XFS_DATA_FORK);
-		break;
-	}
-
-	if (ip->i_afp)
-		xfs_idestroy_fork(ip, XFS_ATTR_FORK);
-
-#ifdef XFS_INODE_TRACE
-	ktrace_free(ip->i_trace);
-#endif
-#ifdef XFS_BMAP_TRACE
-	ktrace_free(ip->i_xtrace);
-#endif
-#ifdef XFS_BTREE_TRACE
-	ktrace_free(ip->i_btrace);
-#endif
-#ifdef XFS_RW_TRACE
-	ktrace_free(ip->i_rwtrace);
-#endif
-#ifdef XFS_ILOCK_TRACE
-	ktrace_free(ip->i_lock_trace);
-#endif
-#ifdef XFS_DIR2_TRACE
-	ktrace_free(ip->i_dir_trace);
-#endif
-	if (ip->i_itemp) {
-		/*
-		 * Only if we are shutting down the fs will we see an
-		 * inode still in the AIL. If it is there, we should remove
-		 * it to prevent a use-after-free from occurring.
-		 */
-		xfs_log_item_t	*lip = &ip->i_itemp->ili_item;
-		struct xfs_ail	*ailp = lip->li_ailp;
-
-		ASSERT(((lip->li_flags & XFS_LI_IN_AIL) == 0) ||
-				       XFS_FORCED_SHUTDOWN(ip->i_mount));
-		if (lip->li_flags & XFS_LI_IN_AIL) {
-			spin_lock(&ailp->xa_lock);
-			if (lip->li_flags & XFS_LI_IN_AIL)
-				xfs_trans_ail_delete(ailp, lip);
-			else
-				spin_unlock(&ailp->xa_lock);
-		}
-		xfs_inode_item_destroy(ip);
-		ip->i_itemp = NULL;
-	}
-	/* asserts to verify all state is correct here */
-	ASSERT(atomic_read(&ip->i_iocount) == 0);
-	ASSERT(atomic_read(&ip->i_pincount) == 0);
-	ASSERT(!spin_is_locked(&ip->i_flags_lock));
-	ASSERT(completion_done(&ip->i_flush));
-	kmem_zone_free(xfs_inode_zone, ip);
+	xfs_inode_free(ip);
 }
 
 /*
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 1f22d65fed0..da428b3fe0f 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -343,6 +343,16 @@ xfs_iformat(
 		return XFS_ERROR(EFSCORRUPTED);
 	}
 
+	if (unlikely((ip->i_d.di_flags & XFS_DIFLAG_REALTIME) &&
+		     !ip->i_mount->m_rtdev_targp)) {
+		xfs_fs_repair_cmn_err(CE_WARN, ip->i_mount,
+			"corrupt dinode %Lu, has realtime flag set.",
+			ip->i_ino);
+		XFS_CORRUPTION_ERROR("xfs_iformat(realtime)",
+				     XFS_ERRLEVEL_LOW, ip->i_mount, dip);
+		return XFS_ERROR(EFSCORRUPTED);
+	}
+
 	switch (ip->i_d.di_mode & S_IFMT) {
 	case S_IFIFO:
 	case S_IFCHR:
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 1804f866a71..65f24a3cc99 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -310,23 +310,6 @@ static inline struct inode *VFS_I(struct xfs_inode *ip)
 }
 
 /*
- * Get rid of a partially initialized inode.
- *
- * We have to go through destroy_inode to make sure allocations
- * from init_inode_always like the security data are undone.
- *
- * We mark the inode bad so that it takes the short cut in
- * the reclaim path instead of going through the flush path
- * which doesn't make sense for an inode that has never seen the
- * light of day.
- */
-static inline void xfs_destroy_inode(struct xfs_inode *ip)
-{
-	make_bad_inode(VFS_I(ip));
-	return destroy_inode(VFS_I(ip));
-}
-
-/*
  * i_flags helper functions
  */
 static inline void
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 3750f04ede0..9dbdff3ea48 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -3180,7 +3180,7 @@ try_again:
 STATIC void
 xlog_state_want_sync(xlog_t *log, xlog_in_core_t *iclog)
 {
-	ASSERT(spin_is_locked(&log->l_icloglock));
+	assert_spin_locked(&log->l_icloglock);
 
 	if (iclog->ic_state == XLOG_STATE_ACTIVE) {
 		xlog_state_switch_iclogs(log, iclog, 0);
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index c4eca5ed5da..492d75bae2b 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -538,7 +538,9 @@ xfs_readlink_bmap(
 		d = XFS_FSB_TO_DADDR(mp, mval[n].br_startblock);
 		byte_cnt = XFS_FSB_TO_B(mp, mval[n].br_blockcount);
 
-		bp = xfs_buf_read(mp->m_ddev_targp, d, BTOBB(byte_cnt), 0);
+		bp = xfs_buf_read_flags(mp->m_ddev_targp, d, BTOBB(byte_cnt),
+					XBF_LOCK | XBF_MAPPED |
+					XBF_DONT_BLOCK);
 		error = XFS_BUF_GETERROR(bp);
 		if (error) {
 			xfs_ioerror_alert("xfs_readlink",
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index 3e798593b17..ab0b85cf21f 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -242,6 +242,10 @@ acpi_os_derive_pci_id(acpi_handle rhandle,
 acpi_status acpi_os_validate_interface(char *interface);
 acpi_status acpi_osi_invalidate(char* interface);
 
+acpi_status
+acpi_os_validate_address(u8 space_id, acpi_physical_address address,
+			 acpi_size length, char *name);
+
 u64 acpi_os_get_timer(void);
 
 acpi_status acpi_os_signal(u32 function, void *info);
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index baf1e0a9a7e..740ac3ad8fd 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -174,7 +174,7 @@ struct acpi_processor_throttling {
 	cpumask_var_t shared_cpu_map;
 	int (*acpi_processor_get_throttling) (struct acpi_processor * pr);
 	int (*acpi_processor_set_throttling) (struct acpi_processor * pr,
-					      int state);
+					      int state, bool force);
 
 	u32 address;
 	u8 duty_offset;
@@ -321,7 +321,8 @@ static inline int acpi_processor_ppc_has_changed(struct acpi_processor *pr)
 /* in processor_throttling.c */
 int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
 int acpi_processor_get_throttling_info(struct acpi_processor *pr);
-extern int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
+extern int acpi_processor_set_throttling(struct acpi_processor *pr,
+					 int state, bool force);
 extern const struct file_operations acpi_processor_throttling_fops;
 extern void acpi_processor_throttling_init(void);
 /* in processor_idle.c */
diff --git a/include/asm-generic/4level-fixup.h b/include/asm-generic/4level-fixup.h
index 9d40e879f99..77ff547730a 100644
--- a/include/asm-generic/4level-fixup.h
+++ b/include/asm-generic/4level-fixup.h
@@ -27,9 +27,9 @@
 #define pud_page_vaddr(pud)		pgd_page_vaddr(pud)
 
 #undef pud_free_tlb
-#define pud_free_tlb(tlb, x)            do { } while (0)
+#define pud_free_tlb(tlb, x, addr)	do { } while (0)
 #define pud_free(mm, x)			do { } while (0)
-#define __pud_free_tlb(tlb, x)		do { } while (0)
+#define __pud_free_tlb(tlb, x, addr)	do { } while (0)
 
 #undef  pud_addr_end
 #define pud_addr_end(addr, end)		(end)
diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h
index d7d50d7ee51..aa00800adac 100644
--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -97,4 +97,8 @@ extern void setup_per_cpu_areas(void);
 #define PER_CPU_ATTRIBUTES
 #endif
 
+#ifndef PER_CPU_DEF_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
+#endif
+
 #endif /* _ASM_GENERIC_PERCPU_H_ */
diff --git a/include/asm-generic/pgtable-nopmd.h b/include/asm-generic/pgtable-nopmd.h
index a7cdc48e8b7..725612b793c 100644
--- a/include/asm-generic/pgtable-nopmd.h
+++ b/include/asm-generic/pgtable-nopmd.h
@@ -59,7 +59,7 @@ static inline pmd_t * pmd_offset(pud_t * pud, unsigned long address)
 static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 {
 }
-#define __pmd_free_tlb(tlb, x)			do { } while (0)
+#define __pmd_free_tlb(tlb, x, a)		do { } while (0)
 
 #undef  pmd_addr_end
 #define pmd_addr_end(addr, end)			(end)
diff --git a/include/asm-generic/pgtable-nopud.h b/include/asm-generic/pgtable-nopud.h
index 87cf449a6df..810431d8351 100644
--- a/include/asm-generic/pgtable-nopud.h
+++ b/include/asm-generic/pgtable-nopud.h
@@ -52,7 +52,7 @@ static inline pud_t * pud_offset(pgd_t * pgd, unsigned long address)
  */
 #define pud_alloc_one(mm, address)		NULL
 #define pud_free(mm, x)				do { } while (0)
-#define __pud_free_tlb(tlb, x)			do { } while (0)
+#define __pud_free_tlb(tlb, x, a)		do { } while (0)
 
 #undef  pud_addr_end
 #define pud_addr_end(addr, end)			(end)
diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h
index f490e43a90b..e43f9766259 100644
--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -123,24 +123,24 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
 		__tlb_remove_tlb_entry(tlb, ptep, address);	\
 	} while (0)
 
-#define pte_free_tlb(tlb, ptep)					\
+#define pte_free_tlb(tlb, ptep, address)			\
 	do {							\
 		tlb->need_flush = 1;				\
-		__pte_free_tlb(tlb, ptep);			\
+		__pte_free_tlb(tlb, ptep, address);		\
 	} while (0)
 
 #ifndef __ARCH_HAS_4LEVEL_HACK
-#define pud_free_tlb(tlb, pudp)					\
+#define pud_free_tlb(tlb, pudp, address)			\
 	do {							\
 		tlb->need_flush = 1;				\
-		__pud_free_tlb(tlb, pudp);			\
+		__pud_free_tlb(tlb, pudp, address);		\
 	} while (0)
 #endif
 
-#define pmd_free_tlb(tlb, pmdp)					\
+#define pmd_free_tlb(tlb, pmdp, address)			\
 	do {							\
 		tlb->need_flush = 1;				\
-		__pmd_free_tlb(tlb, pmdp);			\
+		__pmd_free_tlb(tlb, pmdp, address);		\
 	} while (0)
 
 #define tlb_migrate_finish(mm) do {} while (0)
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 92b73b6140f..6ad76bf5fb4 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -30,9 +30,7 @@
  *	EXCEPTION_TABLE(...)
  *	NOTES
  *
- *	__bss_start = .;
- *	BSS_SECTION(0, 0)
- *	__bss_stop = .;
+ *	BSS_SECTION(0, 0, 0)
  *	_end = .;
  *
  *	/DISCARD/ : {
@@ -191,7 +189,7 @@
 	. = ALIGN(align);						\
 	*(.data.cacheline_aligned)
 
-#define INIT_TASK(align)						\
+#define INIT_TASK_DATA(align)						\
 	. = ALIGN(align);						\
 	*(.data.init_task)
 
@@ -434,14 +432,15 @@
 /*
  * Init task
  */
-#define INIT_TASK_DATA(align)						\
+#define INIT_TASK_DATA_SECTION(align)					\
 	. = ALIGN(align);						\
 	.data.init_task : {						\
-		INIT_TASK						\
+		INIT_TASK_DATA(align)					\
 	}
 
 #ifdef CONFIG_CONSTRUCTORS
-#define KERNEL_CTORS()	VMLINUX_SYMBOL(__ctors_start) = .; \
+#define KERNEL_CTORS()	. = ALIGN(8);			   \
+			VMLINUX_SYMBOL(__ctors_start) = .; \
 			*(.ctors)			   \
 			VMLINUX_SYMBOL(__ctors_end) = .;
 #else
@@ -488,7 +487,8 @@
  * bss (Block Started by Symbol) - uninitialized data
  * zeroed during startup
  */
-#define SBSS								\
+#define SBSS(sbss_align)						\
+	. = ALIGN(sbss_align);						\
 	.sbss : AT(ADDR(.sbss) - LOAD_OFFSET) {				\
 		*(.sbss)						\
 		*(.scommon)						\
@@ -497,12 +497,10 @@
 #define BSS(bss_align)							\
 	. = ALIGN(bss_align);						\
 	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {				\
-		VMLINUX_SYMBOL(__bss_start) = .;			\
 		*(.bss.page_aligned)					\
 		*(.dynbss)						\
 		*(.bss)							\
 		*(COMMON)						\
-		VMLINUX_SYMBOL(__bss_stop) = .;				\
 	}
 
 /*
@@ -704,15 +702,15 @@
  * matches the requirment of PAGE_ALIGNED_DATA.
  *
  * use 0 as page_align if page_aligned data is not used */
-#define RW_DATA_SECTION(cacheline, nosave, pagealigned, inittask)	\
+#define RW_DATA_SECTION(cacheline, pagealigned, inittask)		\
 	. = ALIGN(PAGE_SIZE);						\
 	.data : AT(ADDR(.data) - LOAD_OFFSET) {				\
-		INIT_TASK(inittask)					\
+		INIT_TASK_DATA(inittask)				\
 		CACHELINE_ALIGNED_DATA(cacheline)			\
 		READ_MOSTLY_DATA(cacheline)				\
 		DATA_DATA						\
 		CONSTRUCTORS						\
-		NOSAVE_DATA(nosave)					\
+		NOSAVE_DATA						\
 		PAGE_ALIGNED_DATA(pagealigned)				\
 	}
 
@@ -734,8 +732,10 @@
 		INIT_RAM_FS						\
 	}
 
-#define BSS_SECTION(sbss_align, bss_align)				\
-	SBSS								\
+#define BSS_SECTION(sbss_align, bss_align, stop_align)			\
+	. = ALIGN(sbss_align);						\
+	VMLINUX_SYMBOL(__bss_start) = .;				\
+	SBSS(sbss_align)						\
 	BSS(bss_align)							\
-	. = ALIGN(4);
-
+	. = ALIGN(stop_align);						\
+	VMLINUX_SYMBOL(__bss_stop) = .;
diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h
index 010545436ef..5a2bd1cc965 100644
--- a/include/crypto/algapi.h
+++ b/include/crypto/algapi.h
@@ -137,6 +137,7 @@ struct crypto_instance *crypto_alloc_instance(const char *name,
 void crypto_init_queue(struct crypto_queue *queue, unsigned int max_qlen);
 int crypto_enqueue_request(struct crypto_queue *queue,
 			   struct crypto_async_request *request);
+void *__crypto_dequeue_request(struct crypto_queue *queue, unsigned int offset);
 struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue);
 int crypto_tfm_in_queue(struct crypto_queue *queue, struct crypto_tfm *tfm);
 
diff --git a/include/crypto/internal/skcipher.h b/include/crypto/internal/skcipher.h
index 2ba42cd7d6a..3a748a6bf77 100644
--- a/include/crypto/internal/skcipher.h
+++ b/include/crypto/internal/skcipher.h
@@ -79,8 +79,8 @@ static inline int skcipher_enqueue_givcrypt(
 static inline struct skcipher_givcrypt_request *skcipher_dequeue_givcrypt(
 	struct crypto_queue *queue)
 {
-	return container_of(ablkcipher_dequeue_request(queue),
-			    struct skcipher_givcrypt_request, creq);
+	return __crypto_dequeue_request(
+		queue, offsetof(struct skcipher_givcrypt_request, creq.base));
 }
 
 static inline void *skcipher_givcrypt_reqctx(
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index c263e4d7175..7d6c9a2dfcb 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -35,11 +35,11 @@ struct est_timings {
 } __attribute__((packed));
 
 /* 00=16:10, 01=4:3, 10=5:4, 11=16:9 */
-#define EDID_TIMING_ASPECT_SHIFT 0
+#define EDID_TIMING_ASPECT_SHIFT 6
 #define EDID_TIMING_ASPECT_MASK  (0x3 << EDID_TIMING_ASPECT_SHIFT)
 
 /* need to add 60 */
-#define EDID_TIMING_VFREQ_SHIFT  2
+#define EDID_TIMING_VFREQ_SHIFT  0
 #define EDID_TIMING_VFREQ_MASK   (0x3f << EDID_TIMING_VFREQ_SHIFT)
 
 struct std_timing {
@@ -47,11 +47,11 @@ struct std_timing {
 	u8 vfreq_aspect;
 } __attribute__((packed));
 
-#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 6)
-#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 5)
+#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 1)
+#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 2)
 #define DRM_EDID_PT_SEPARATE_SYNC  (3 << 3)
-#define DRM_EDID_PT_STEREO         (1 << 2)
-#define DRM_EDID_PT_INTERLACED     (1 << 1)
+#define DRM_EDID_PT_STEREO         (1 << 5)
+#define DRM_EDID_PT_INTERLACED     (1 << 7)
 
 /* If detailed data is pixel timing */
 struct detailed_pixel_timing {
@@ -93,7 +93,7 @@ struct detailed_data_monitor_range {
 } __attribute__((packed));
 
 struct detailed_data_wpindex {
-	u8 white_xy_lo; /* Upper 2 bits each */
+	u8 white_yx_lo; /* Lower 2 bits each */
 	u8 white_x_hi;
 	u8 white_y_hi;
 	u8 gamma; /* need to divide by 100 then add 1 */
@@ -135,21 +135,21 @@ struct detailed_timing {
 	} data;
 } __attribute__((packed));
 
-#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 7)
-#define DRM_EDID_INPUT_SYNC_ON_GREEN   (1 << 5)
-#define DRM_EDID_INPUT_COMPOSITE_SYNC  (1 << 4)
+#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 0)
+#define DRM_EDID_INPUT_SYNC_ON_GREEN   (1 << 1)
+#define DRM_EDID_INPUT_COMPOSITE_SYNC  (1 << 2)
 #define DRM_EDID_INPUT_SEPARATE_SYNCS  (1 << 3)
-#define DRM_EDID_INPUT_BLANK_TO_BLACK  (1 << 2)
-#define DRM_EDID_INPUT_VIDEO_LEVEL     (3 << 1)
-#define DRM_EDID_INPUT_DIGITAL         (1 << 0) /* bits above must be zero if set */
+#define DRM_EDID_INPUT_BLANK_TO_BLACK  (1 << 4)
+#define DRM_EDID_INPUT_VIDEO_LEVEL     (3 << 5)
+#define DRM_EDID_INPUT_DIGITAL         (1 << 7) /* bits below must be zero if set */
 
-#define DRM_EDID_FEATURE_DEFAULT_GTF      (1 << 7)
-#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 6)
-#define DRM_EDID_FEATURE_STANDARD_COLOR   (1 << 5)
+#define DRM_EDID_FEATURE_DEFAULT_GTF      (1 << 0)
+#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 1)
+#define DRM_EDID_FEATURE_STANDARD_COLOR   (1 << 2)
 #define DRM_EDID_FEATURE_DISPLAY_TYPE     (3 << 3) /* 00=mono, 01=rgb, 10=non-rgb, 11=unknown */
-#define DRM_EDID_FEATURE_PM_ACTIVE_OFF    (1 << 2)
-#define DRM_EDID_FEATURE_PM_SUSPEND       (1 << 1)
-#define DRM_EDID_FEATURE_PM_STANDBY       (1 << 0)
+#define DRM_EDID_FEATURE_PM_ACTIVE_OFF    (1 << 5)
+#define DRM_EDID_FEATURE_PM_SUSPEND       (1 << 6)
+#define DRM_EDID_FEATURE_PM_STANDBY       (1 << 7)
 
 struct edid {
 	u8 header[8];
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 45c18672b09..853508499d2 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -43,6 +43,7 @@
 	{0x1002, 0x4A4F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x4A50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x4A54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4B48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x4B49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x4B4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x4B4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
@@ -256,12 +257,16 @@
 	{0x1002, 0x940F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x94A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x94A1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94A3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x94B1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x94B3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94B4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x94B5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94B9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9440, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9441, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9442, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9443, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9444, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x944A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -286,6 +291,7 @@
 	{0x1002, 0x948F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9490, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9491, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9495, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9498, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x949C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x949E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
@@ -323,6 +329,7 @@
 	{0x1002, 0x9552, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9553, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9555, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9557, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9580, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9581, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9583, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -346,12 +353,12 @@
 	{0x1002, 0x9599, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x959B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x95C0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x95C2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x95C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x95C5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x95C6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x95C7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x95C9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
-	{0x1002, 0x95C2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
-	{0x1002, 0x95C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x95CC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x95CD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x95CE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
@@ -363,6 +370,11 @@
 	{0x1002, 0x9614, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
 	{0x1002, 0x9615, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
 	{0x1002, 0x9616, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9710, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9711, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9713, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9714, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
 	{0, 0, 0}
 
 #define r128_PCI_IDS \
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
index 41862e9a4c2..2ba61e18fc8 100644
--- a/include/drm/radeon_drm.h
+++ b/include/drm/radeon_drm.h
@@ -506,6 +506,9 @@ typedef struct {
 #define DRM_RADEON_GEM_WAIT_IDLE	0x24
 #define DRM_RADEON_CS			0x26
 #define DRM_RADEON_INFO			0x27
+#define DRM_RADEON_GEM_SET_TILING	0x28
+#define DRM_RADEON_GEM_GET_TILING	0x29
+#define DRM_RADEON_GEM_BUSY		0x2a
 
 #define DRM_IOCTL_RADEON_CP_INIT    DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_INIT, drm_radeon_init_t)
 #define DRM_IOCTL_RADEON_CP_START   DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_CP_START)
@@ -544,7 +547,9 @@ typedef struct {
 #define DRM_IOCTL_RADEON_GEM_WAIT_IDLE	DRM_IOW(DRM_COMMAND_BASE + DRM_RADEON_GEM_WAIT_IDLE, struct drm_radeon_gem_wait_idle)
 #define DRM_IOCTL_RADEON_CS		DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_CS, struct drm_radeon_cs)
 #define DRM_IOCTL_RADEON_INFO		DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_INFO, struct drm_radeon_info)
-
+#define DRM_IOCTL_RADEON_SET_TILING	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_SET_TILING, struct drm_radeon_gem_set_tiling)
+#define DRM_IOCTL_RADEON_GET_TILING	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_GET_TILING, struct drm_radeon_gem_get_tiling)
+#define DRM_IOCTL_RADEON_GEM_BUSY	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_BUSY, struct drm_radeon_gem_busy)
 
 typedef struct drm_radeon_init {
 	enum {
@@ -704,6 +709,7 @@ typedef struct drm_radeon_indirect {
 #define RADEON_PARAM_FB_LOCATION           14   /* FB location */
 #define RADEON_PARAM_NUM_GB_PIPES          15   /* num GB pipes */
 #define RADEON_PARAM_DEVICE_ID             16
+#define RADEON_PARAM_NUM_Z_PIPES           17   /* num Z pipes */
 
 typedef struct drm_radeon_getparam {
 	int param;
@@ -796,6 +802,24 @@ struct drm_radeon_gem_create {
 	uint32_t	flags;
 };
 
+#define RADEON_TILING_MACRO 0x1
+#define RADEON_TILING_MICRO 0x2
+#define RADEON_TILING_SWAP  0x4
+#define RADEON_TILING_SURFACE  0x8 /* this object requires a surface
+				    * when mapped - i.e. front buffer */
+
+struct drm_radeon_gem_set_tiling {
+	uint32_t	handle;
+	uint32_t	tiling_flags;
+	uint32_t	pitch;
+};
+
+struct drm_radeon_gem_get_tiling {
+	uint32_t	handle;
+	uint32_t	tiling_flags;
+	uint32_t	pitch;
+};
+
 struct drm_radeon_gem_mmap {
 	uint32_t	handle;
 	uint32_t	pad;
@@ -817,7 +841,7 @@ struct drm_radeon_gem_wait_idle {
 
 struct drm_radeon_gem_busy {
 	uint32_t	handle;
-	uint32_t	busy;
+	uint32_t        domain;
 };
 
 struct drm_radeon_gem_pread {
@@ -874,6 +898,7 @@ struct drm_radeon_cs {
 
 #define RADEON_INFO_DEVICE_ID		0x00
 #define RADEON_INFO_NUM_GB_PIPES	0x01
+#define RADEON_INFO_NUM_Z_PIPES 	0x02
 
 struct drm_radeon_info {
 	uint32_t		request;
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
index 62ed733c52a..a68829db381 100644
--- a/include/drm/ttm/ttm_bo_driver.h
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -121,6 +121,7 @@ struct ttm_backend {
 #define TTM_PAGE_FLAG_SWAPPED         (1 << 4)
 #define TTM_PAGE_FLAG_PERSISTANT_SWAP (1 << 5)
 #define TTM_PAGE_FLAG_ZERO_ALLOC      (1 << 6)
+#define TTM_PAGE_FLAG_DMA32           (1 << 7)
 
 enum ttm_caching_state {
 	tt_uncached,
@@ -353,6 +354,14 @@ struct ttm_bo_driver {
 	int (*sync_obj_flush) (void *sync_obj, void *sync_arg);
 	void (*sync_obj_unref) (void **sync_obj);
 	void *(*sync_obj_ref) (void *sync_obj);
+
+	/* hook to notify driver about a driver move so it
+	 * can do tiling things */
+	void (*move_notify)(struct ttm_buffer_object *bo,
+			    struct ttm_mem_reg *new_mem);
+	/* notify the driver we are taking a fault on this BO
+	 * and have reserved it */
+	void (*fault_reserve_notify)(struct ttm_buffer_object *bo);
 };
 
 #define TTM_NUM_MEM_TYPES 8
@@ -429,6 +438,8 @@ struct ttm_bo_device {
 	 */
 
 	struct delayed_work wq;
+
+	bool need_dma32;
 };
 
 /**
@@ -648,7 +659,14 @@ extern int ttm_bo_device_release(struct ttm_bo_device *bdev);
 extern int ttm_bo_device_init(struct ttm_bo_device *bdev,
 			      struct ttm_mem_global *mem_glob,
 			      struct ttm_bo_driver *driver,
-			      uint64_t file_page_offset);
+			      uint64_t file_page_offset, bool need_dma32);
+
+/**
+ * ttm_bo_unmap_virtual
+ *
+ * @bo: tear down the virtual mappings for this BO
+ */
+extern void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo);
 
 /**
  * ttm_bo_reserve:
diff --git a/include/drm/ttm/ttm_module.h b/include/drm/ttm/ttm_module.h
index 889a4c7958a..d1d433834e4 100644
--- a/include/drm/ttm/ttm_module.h
+++ b/include/drm/ttm/ttm_module.h
@@ -33,7 +33,7 @@
 
 #include <linux/kernel.h>
 
-#define TTM_PFX "[TTM]"
+#define TTM_PFX "[TTM] "
 
 enum ttm_global_types {
 	TTM_GLOBAL_TTM_MEM = 0,
diff --git a/include/linux/aio.h b/include/linux/aio.h
index b16a957030f..47f7d932a01 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -121,9 +121,9 @@ struct kiocb {
 
 	/*
 	 * If the aio_resfd field of the userspace iocb is not zero,
-	 * this is the underlying file* to deliver event to.
+	 * this is the underlying eventfd context to deliver events to.
 	 */
-	struct file		*ki_eventfd;
+	struct eventfd_ctx	*ki_eventfd;
 };
 
 #define is_sync_kiocb(iocb)	((iocb)->ki_key == KIOCB_SYNC_KEY)
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 0ec2c594868..1d52425a611 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -229,9 +229,14 @@ static inline int bdi_rw_congested(struct backing_dev_info *bdi)
 				  (1 << BDI_async_congested));
 }
 
-void clear_bdi_congested(struct backing_dev_info *bdi, int rw);
-void set_bdi_congested(struct backing_dev_info *bdi, int rw);
-long congestion_wait(int rw, long timeout);
+enum {
+	BLK_RW_ASYNC	= 0,
+	BLK_RW_SYNC	= 1,
+};
+
+void clear_bdi_congested(struct backing_dev_info *bdi, int sync);
+void set_bdi_congested(struct backing_dev_info *bdi, int sync);
+long congestion_wait(int sync, long timeout);
 
 
 static inline bool bdi_cap_writeback_dirty(struct backing_dev_info *bdi)
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index 61ee18c1bdb..2046b5b8af4 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -117,6 +117,7 @@ extern int setup_arg_pages(struct linux_binprm * bprm,
 			   int executable_stack);
 extern int bprm_mm_init(struct linux_binprm *bprm);
 extern int copy_strings_kernel(int argc,char ** argv,struct linux_binprm *bprm);
+extern int prepare_bprm_creds(struct linux_binprm *bprm);
 extern void install_exec_creds(struct linux_binprm *bprm);
 extern void do_coredump(long signr, int exit_code, struct pt_regs *regs);
 extern int set_binfmt(struct linux_binfmt *new);
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 2a04eb54c0d..2892b710771 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -319,7 +319,6 @@ static inline int bio_has_allocated_vec(struct bio *bio)
  */
 struct bio_integrity_payload {
 	struct bio		*bip_bio;	/* parent bio */
-	struct bio_vec		*bip_vec;	/* integrity data vector */
 
 	sector_t		bip_sector;	/* virtual start sector */
 
@@ -328,11 +327,12 @@ struct bio_integrity_payload {
 
 	unsigned int		bip_size;
 
-	unsigned short		bip_pool;	/* pool the ivec came from */
+	unsigned short		bip_slab;	/* slab the bip came from */
 	unsigned short		bip_vcnt;	/* # of integrity bio_vecs */
 	unsigned short		bip_idx;	/* current bip_vec index */
 
 	struct work_struct	bip_work;	/* I/O completion */
+	struct bio_vec		bip_vec[0];	/* embedded bvec array */
 };
 #endif /* CONFIG_BLK_DEV_INTEGRITY */
 
@@ -430,6 +430,9 @@ struct bio_set {
 	unsigned int front_pad;
 
 	mempool_t *bio_pool;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+	mempool_t *bio_integrity_pool;
+#endif
 	mempool_t *bvec_pool;
 };
 
@@ -634,8 +637,9 @@ static inline struct bio *bio_list_get(struct bio_list *bl)
 
 #define bio_integrity(bio) (bio->bi_integrity != NULL)
 
+extern struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *, gfp_t, unsigned int, struct bio_set *);
 extern struct bio_integrity_payload *bio_integrity_alloc(struct bio *, gfp_t, unsigned int);
-extern void bio_integrity_free(struct bio *);
+extern void bio_integrity_free(struct bio *, struct bio_set *);
 extern int bio_integrity_add_page(struct bio *, struct page *, unsigned int, unsigned int);
 extern int bio_integrity_enabled(struct bio *bio);
 extern int bio_integrity_set_tag(struct bio *, void *, unsigned int);
@@ -645,21 +649,27 @@ extern void bio_integrity_endio(struct bio *, int);
 extern void bio_integrity_advance(struct bio *, unsigned int);
 extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int);
 extern void bio_integrity_split(struct bio *, struct bio_pair *, int);
-extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t);
+extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t, struct bio_set *);
+extern int bioset_integrity_create(struct bio_set *, int);
+extern void bioset_integrity_free(struct bio_set *);
+extern void bio_integrity_init(void);
 
 #else /* CONFIG_BLK_DEV_INTEGRITY */
 
 #define bio_integrity(a)		(0)
+#define bioset_integrity_create(a, b)	(0)
 #define bio_integrity_prep(a)		(0)
 #define bio_integrity_enabled(a)	(0)
-#define bio_integrity_clone(a, b, c)	(0)
-#define bio_integrity_free(a)		do { } while (0)
+#define bio_integrity_clone(a, b, c, d)	(0)
+#define bioset_integrity_free(a)	do { } while (0)
+#define bio_integrity_free(a, b)	do { } while (0)
 #define bio_integrity_endio(a, b)	do { } while (0)
 #define bio_integrity_advance(a, b)	do { } while (0)
 #define bio_integrity_trim(a, b, c)	do { } while (0)
 #define bio_integrity_split(a, b, c)	do { } while (0)
 #define bio_integrity_set_tag(a, b, c)	do { } while (0)
 #define bio_integrity_get_tag(a, b, c)	do { } while (0)
+#define bio_integrity_init(a)		do { } while (0)
 
 #endif /* CONFIG_BLK_DEV_INTEGRITY */
 
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index 2878811c613..756d78b8c1c 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -94,13 +94,13 @@ extern void __bitmap_shift_right(unsigned long *dst,
                         const unsigned long *src, int shift, int bits);
 extern void __bitmap_shift_left(unsigned long *dst,
                         const unsigned long *src, int shift, int bits);
-extern void __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
+extern int __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
 			const unsigned long *bitmap2, int bits);
 extern void __bitmap_or(unsigned long *dst, const unsigned long *bitmap1,
 			const unsigned long *bitmap2, int bits);
 extern void __bitmap_xor(unsigned long *dst, const unsigned long *bitmap1,
 			const unsigned long *bitmap2, int bits);
-extern void __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
+extern int __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
 			const unsigned long *bitmap2, int bits);
 extern int __bitmap_intersects(const unsigned long *bitmap1,
 			const unsigned long *bitmap2, int bits);
@@ -171,13 +171,12 @@ static inline void bitmap_copy(unsigned long *dst, const unsigned long *src,
 	}
 }
 
-static inline void bitmap_and(unsigned long *dst, const unsigned long *src1,
+static inline int bitmap_and(unsigned long *dst, const unsigned long *src1,
 			const unsigned long *src2, int nbits)
 {
 	if (small_const_nbits(nbits))
-		*dst = *src1 & *src2;
-	else
-		__bitmap_and(dst, src1, src2, nbits);
+		return (*dst = *src1 & *src2) != 0;
+	return __bitmap_and(dst, src1, src2, nbits);
 }
 
 static inline void bitmap_or(unsigned long *dst, const unsigned long *src1,
@@ -198,13 +197,12 @@ static inline void bitmap_xor(unsigned long *dst, const unsigned long *src1,
 		__bitmap_xor(dst, src1, src2, nbits);
 }
 
-static inline void bitmap_andnot(unsigned long *dst, const unsigned long *src1,
+static inline int bitmap_andnot(unsigned long *dst, const unsigned long *src1,
 			const unsigned long *src2, int nbits)
 {
 	if (small_const_nbits(nbits))
-		*dst = *src1 & ~(*src2);
-	else
-		__bitmap_andnot(dst, src1, src2, nbits);
+		return (*dst = *src1 & ~(*src2)) != 0;
+	return __bitmap_andnot(dst, src1, src2, nbits);
 }
 
 static inline void bitmap_complement(unsigned long *dst, const unsigned long *src,
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 8963d9149b5..69103e053c9 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -70,11 +70,6 @@ enum rq_cmd_type_bits {
 	REQ_TYPE_ATA_PC,
 };
 
-enum {
-	BLK_RW_ASYNC	= 0,
-	BLK_RW_SYNC	= 1,
-};
-
 /*
  * For request of type REQ_TYPE_LINUX_BLOCK, rq->cmd[0] is the opcode being
  * sent down (similar to how REQ_TYPE_BLOCK_PC means that ->cmd[] holds a
@@ -301,12 +296,6 @@ struct blk_queue_tag {
 #define BLK_SCSI_MAX_CMDS	(256)
 #define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
 
-struct blk_cmd_filter {
-	unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
-	unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
-	struct kobject kobj;
-};
-
 struct queue_limits {
 	unsigned long		bounce_pfn;
 	unsigned long		seg_boundary_mask;
@@ -445,7 +434,6 @@ struct request_queue
 #if defined(CONFIG_BLK_DEV_BSG)
 	struct bsg_class_device bsg_dev;
 #endif
-	struct blk_cmd_filter cmd_filter;
 };
 
 #define QUEUE_FLAG_CLUSTER	0	/* cluster several segments into 1 */
@@ -730,6 +718,7 @@ struct rq_map_data {
 	int nr_entries;
 	unsigned long offset;
 	int null_mapped;
+	int from_user;
 };
 
 struct req_iterator {
@@ -786,18 +775,18 @@ extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t,
  * congested queues, and wake up anyone who was waiting for requests to be
  * put back.
  */
-static inline void blk_clear_queue_congested(struct request_queue *q, int rw)
+static inline void blk_clear_queue_congested(struct request_queue *q, int sync)
 {
-	clear_bdi_congested(&q->backing_dev_info, rw);
+	clear_bdi_congested(&q->backing_dev_info, sync);
 }
 
 /*
  * A queue has just entered congestion.  Flag that in the queue's VM-visible
  * state flags and increment the global gounter of congested queues.
  */
-static inline void blk_set_queue_congested(struct request_queue *q, int rw)
+static inline void blk_set_queue_congested(struct request_queue *q, int sync)
 {
-	set_bdi_congested(&q->backing_dev_info, rw);
+	set_bdi_congested(&q->backing_dev_info, sync);
 }
 
 extern void blk_start_queue(struct request_queue *q);
@@ -924,6 +913,7 @@ extern void blk_queue_logical_block_size(struct request_queue *, unsigned short)
 extern void blk_queue_physical_block_size(struct request_queue *, unsigned short);
 extern void blk_queue_alignment_offset(struct request_queue *q,
 				       unsigned int alignment);
+extern void blk_limits_io_min(struct queue_limits *limits, unsigned int min);
 extern void blk_queue_io_min(struct request_queue *q, unsigned int min);
 extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt);
 extern void blk_set_default_limits(struct queue_limits *lim);
@@ -998,13 +988,7 @@ static inline int sb_issue_discard(struct super_block *sb,
 	return blkdev_issue_discard(sb->s_bdev, block, nr_blocks, GFP_KERNEL);
 }
 
-/*
-* command filter functions
-*/
-extern int blk_verify_command(struct blk_cmd_filter *filter,
-			      unsigned char *cmd, fmode_t has_write_perm);
-extern void blk_unregister_filter(struct gendisk *disk);
-extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
+extern int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm);
 
 #define MAX_PHYS_SEGMENTS 128
 #define MAX_HW_SEGMENTS 128
diff --git a/include/linux/bq27000_battery.h b/include/linux/bq27000_battery.h
new file mode 100644
index 00000000000..a617466a517
--- /dev/null
+++ b/include/linux/bq27000_battery.h
@@ -0,0 +1,16 @@
+#ifndef __BQ27000_BATTERY_H__
+#define __BQ27000_BATTERY_H__
+
+void bq27000_charging_state_change(struct platform_device *pdev);
+
+struct bq27000_platform_data {
+	const char 	*name;
+	int		rsense_mohms;
+	int (*hdq_read)(int);
+	int (*hdq_write)(int, u8);
+	int (*hdq_initialized)(void);
+	int (*get_charger_online_status)(void);
+	int (*get_charger_active_status)(void);
+};
+
+#endif
diff --git a/include/linux/cb710.h b/include/linux/cb710.h
index 63bc9a4d292..8cc10411bab 100644
--- a/include/linux/cb710.h
+++ b/include/linux/cb710.h
@@ -140,29 +140,6 @@ void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
 #include <linux/highmem.h>
 #include <linux/scatterlist.h>
 
-/**
- * cb710_sg_miter_stop_writing - stop mapping iteration after writing
- * @miter: sg mapping iter to be stopped
- *
- * Description:
- *   Stops mapping iterator @miter.  @miter should have been started
- *   started using sg_miter_start().  A stopped iteration can be
- *   resumed by calling sg_miter_next() on it.  This is useful when
- *   resources (kmap) need to be released during iteration.
- *
- *   This is a convenience wrapper that will be optimized out for arches
- *   that don't need flush_kernel_dcache_page().
- *
- * Context:
- *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
- */
-static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
-{
-	if (miter->page)
-		flush_kernel_dcache_page(miter->page);
-	sg_miter_stop(miter);
-}
-
 /*
  * 32-bit PIO mapping sg iterator
  *
@@ -171,12 +148,12 @@ static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
  * without DMA support).
  *
  * Best-case reading (transfer from device):
- *   sg_miter_start();
+ *   sg_miter_start(, SG_MITER_TO_SG);
  *   cb710_sg_dwiter_write_from_io();
- *   cb710_sg_miter_stop_writing();
+ *   sg_miter_stop();
  *
  * Best-case writing (transfer to device):
- *   sg_miter_start();
+ *   sg_miter_start(, SG_MITER_FROM_SG);
  *   cb710_sg_dwiter_read_to_io();
  *   sg_miter_stop();
  */
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 665fa70e409..90bba9e6228 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -179,14 +179,11 @@ struct cgroup {
 	 */
 	struct list_head release_list;
 
-	/* pids_mutex protects the fields below */
+	/* pids_mutex protects pids_list and cached pid arrays. */
 	struct rw_semaphore pids_mutex;
-	/* Array of process ids in the cgroup */
-	pid_t *tasks_pids;
-	/* How many files are using the current tasks_pids array */
-	int pids_use_count;
-	/* Length of the current tasks_pids array */
-	int pids_length;
+
+	/* Linked list of struct cgroup_pids */
+	struct list_head pids_list;
 
 	/* For RCU-protected deletion */
 	struct rcu_head rcu_head;
@@ -366,6 +363,23 @@ int cgroup_task_count(const struct cgroup *cgrp);
 int cgroup_is_descendant(const struct cgroup *cgrp, struct task_struct *task);
 
 /*
+ * When the subsys has to access css and may add permanent refcnt to css,
+ * it should take care of racy conditions with rmdir(). Following set of
+ * functions, is for stop/restart rmdir if necessary.
+ * Because these will call css_get/put, "css" should be alive css.
+ *
+ *  cgroup_exclude_rmdir();
+ *  ...do some jobs which may access arbitrary empty cgroup
+ *  cgroup_release_and_wakeup_rmdir();
+ *
+ *  When someone removes a cgroup while cgroup_exclude_rmdir() holds it,
+ *  it sleeps and cgroup_release_and_wakeup_rmdir() will wake him up.
+ */
+
+void cgroup_exclude_rmdir(struct cgroup_subsys_state *css);
+void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css);
+
+/*
  * Control Group subsystem type.
  * See Documentation/cgroups/cgroups.txt for details
  */
diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h
index 20a100fe2b4..3a1dbba4d3a 100644
--- a/include/linux/clockchips.h
+++ b/include/linux/clockchips.h
@@ -143,12 +143,3 @@ extern void clockevents_notify(unsigned long reason, void *arg);
 #endif
 
 #endif
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
-extern ktime_t clockevents_get_next_event(int cpu);
-#else
-static inline ktime_t clockevents_get_next_event(int cpu)
-{
-	return (ktime_t) { .tv64 = KTIME_MAX };
-}
-#endif
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index c56457c8334..1219be4fb42 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -293,7 +293,12 @@ static inline int clocksource_enable(struct clocksource *cs)
 	if (cs->enable)
 		ret = cs->enable(cs);
 
-	/* save mult_orig on enable */
+	/*
+	 * The frequency may have changed while the clocksource
+	 * was disabled. If so the code in ->enable() must update
+	 * the mult value to reflect the new frequency. Make sure
+	 * mult_orig follows this change.
+	 */
 	cs->mult_orig = cs->mult;
 
 	return ret;
@@ -309,6 +314,13 @@ static inline int clocksource_enable(struct clocksource *cs)
  */
 static inline void clocksource_disable(struct clocksource *cs)
 {
+	/*
+	 * Save mult_orig in mult so clocksource_enable() can
+	 * restore the value regardless if ->enable() updates
+	 * the value of mult or not.
+	 */
+	cs->mult = cs->mult_orig;
+
 	if (cs->disable)
 		cs->disable(cs);
 }
diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h
index d71f7c0f931..38fe59dc89a 100644
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -89,7 +89,6 @@ struct vc_data {
 	unsigned int	vc_need_wrap	: 1;
 	unsigned int	vc_can_do_color	: 1;
 	unsigned int	vc_report_mouse : 2;
-	unsigned int	vc_kmalloced	: 1;
 	unsigned char	vc_utf		: 1;	/* Unicode UTF-8 encoding */
 	unsigned char	vc_utf_count;
 		 int	vc_utf_char;
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index c5ac87ca7bc..796df12091b 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -43,10 +43,10 @@
  * int cpu_isset(cpu, mask)		true iff bit 'cpu' set in mask
  * int cpu_test_and_set(cpu, mask)	test and set bit 'cpu' in mask
  *
- * void cpus_and(dst, src1, src2)	dst = src1 & src2  [intersection]
+ * int cpus_and(dst, src1, src2)	dst = src1 & src2  [intersection]
  * void cpus_or(dst, src1, src2)	dst = src1 | src2  [union]
  * void cpus_xor(dst, src1, src2)	dst = src1 ^ src2
- * void cpus_andnot(dst, src1, src2)	dst = src1 & ~src2
+ * int cpus_andnot(dst, src1, src2)	dst = src1 & ~src2
  * void cpus_complement(dst, src)	dst = ~src
  *
  * int cpus_equal(mask1, mask2)		Does mask1 == mask2?
@@ -179,10 +179,10 @@ static inline int __cpu_test_and_set(int cpu, cpumask_t *addr)
 }
 
 #define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS)
-static inline void __cpus_and(cpumask_t *dstp, const cpumask_t *src1p,
+static inline int __cpus_and(cpumask_t *dstp, const cpumask_t *src1p,
 					const cpumask_t *src2p, int nbits)
 {
-	bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
+	return bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
 }
 
 #define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS)
@@ -201,10 +201,10 @@ static inline void __cpus_xor(cpumask_t *dstp, const cpumask_t *src1p,
 
 #define cpus_andnot(dst, src1, src2) \
 				__cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS)
-static inline void __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p,
+static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p,
 					const cpumask_t *src2p, int nbits)
 {
-	bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
+	return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
 }
 
 #define cpus_complement(dst, src) __cpus_complement(&(dst), &(src), NR_CPUS)
@@ -738,11 +738,11 @@ static inline void cpumask_clear(struct cpumask *dstp)
  * @src1p: the first input
  * @src2p: the second input
  */
-static inline void cpumask_and(struct cpumask *dstp,
+static inline int cpumask_and(struct cpumask *dstp,
 			       const struct cpumask *src1p,
 			       const struct cpumask *src2p)
 {
-	bitmap_and(cpumask_bits(dstp), cpumask_bits(src1p),
+	return bitmap_and(cpumask_bits(dstp), cpumask_bits(src1p),
 				       cpumask_bits(src2p), nr_cpumask_bits);
 }
 
@@ -779,11 +779,11 @@ static inline void cpumask_xor(struct cpumask *dstp,
  * @src1p: the first input
  * @src2p: the second input
  */
-static inline void cpumask_andnot(struct cpumask *dstp,
+static inline int cpumask_andnot(struct cpumask *dstp,
 				  const struct cpumask *src1p,
 				  const struct cpumask *src2p)
 {
-	bitmap_andnot(cpumask_bits(dstp), cpumask_bits(src1p),
+	return bitmap_andnot(cpumask_bits(dstp), cpumask_bits(src1p),
 					  cpumask_bits(src2p), nr_cpumask_bits);
 }
 
diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h
index 2dac064d835..0026f267da2 100644
--- a/include/linux/crash_dump.h
+++ b/include/linux/crash_dump.h
@@ -3,7 +3,6 @@
 
 #ifdef CONFIG_CRASH_DUMP
 #include <linux/kexec.h>
-#include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/proc_fs.h>
 
diff --git a/include/linux/decompress/generic.h b/include/linux/decompress/generic.h
index 6dfb856327b..0c7111a55a1 100644
--- a/include/linux/decompress/generic.h
+++ b/include/linux/decompress/generic.h
@@ -1,31 +1,37 @@
 #ifndef DECOMPRESS_GENERIC_H
 #define DECOMPRESS_GENERIC_H
 
-/* Minimal chunksize to be read.
- *Bzip2 prefers at least 4096
- *Lzma prefers 0x10000 */
-#define COMPR_IOBUF_SIZE	4096
-
 typedef int (*decompress_fn) (unsigned char *inbuf, int len,
 			      int(*fill)(void*, unsigned int),
-			      int(*writebb)(void*, unsigned int),
-			      unsigned char *output,
+			      int(*flush)(void*, unsigned int),
+			      unsigned char *outbuf,
 			      int *posp,
 			      void(*error)(char *x));
 
 /* inbuf   - input buffer
  *len     - len of pre-read data in inbuf
- *fill    - function to fill inbuf if empty
- *writebb - function to write out outbug
+ *fill    - function to fill inbuf when empty
+ *flush   - function to write out outbuf
+ *outbuf  - output buffer
  *posp    - if non-null, input position (number of bytes read) will be
  *	  returned here
  *
- *If len != 0, the inbuf is initialized (with as much data), and fill
- *should not be called
- *If len = 0, the inbuf is allocated, but empty. Its size is IOBUF_SIZE
- *fill should be called (repeatedly...) to read data, at most IOBUF_SIZE
+ *If len != 0, inbuf should contain all the necessary input data, and fill
+ *should be NULL
+ *If len = 0, inbuf can be NULL, in which case the decompressor will allocate
+ *the input buffer.  If inbuf != NULL it must be at least XXX_IOBUF_SIZE bytes.
+ *fill will be called (repeatedly...) to read data, at most XXX_IOBUF_SIZE
+ *bytes should be read per call.  Replace XXX with the appropriate decompressor
+ *name, i.e. LZMA_IOBUF_SIZE.
+ *
+ *If flush = NULL, outbuf must be large enough to buffer all the expected
+ *output.  If flush != NULL, the output buffer will be allocated by the
+ *decompressor (outbuf = NULL), and the flush function will be called to
+ *flush the output buffer at the appropriate time (decompressor and stream
+ *dependent).
  */
 
+
 /* Utility routine to detect the decompression method */
 decompress_fn decompress_method(const unsigned char *inbuf, int len,
 				const char **name);
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 0d6310657f3..df7607e6dce 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -84,13 +84,16 @@ typedef int (*dm_merge_fn) (struct dm_target *ti, struct bvec_merge_data *bvm,
 
 typedef int (*iterate_devices_callout_fn) (struct dm_target *ti,
 					   struct dm_dev *dev,
-					   sector_t physical_start,
+					   sector_t start, sector_t len,
 					   void *data);
 
 typedef int (*dm_iterate_devices_fn) (struct dm_target *ti,
 				      iterate_devices_callout_fn fn,
 				      void *data);
 
+typedef void (*dm_io_hints_fn) (struct dm_target *ti,
+				struct queue_limits *limits);
+
 /*
  * Returns:
  *    0: The target can handle the next I/O immediately.
@@ -104,7 +107,7 @@ void dm_error(const char *message);
  * Combine device limits.
  */
 int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
-			 sector_t start, void *data);
+			 sector_t start, sector_t len, void *data);
 
 struct dm_dev {
 	struct block_device *bdev;
@@ -151,6 +154,7 @@ struct target_type {
 	dm_merge_fn merge;
 	dm_busy_fn busy;
 	dm_iterate_devices_fn iterate_devices;
+	dm_io_hints_fn io_hints;
 
 	/* For internal device-mapper use. */
 	struct list_head list;
diff --git a/include/linux/device.h b/include/linux/device.h
index ed4e39f2c42..aebb81036db 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -25,8 +25,6 @@
 #include <asm/atomic.h>
 #include <asm/device.h>
 
-#define BUS_ID_SIZE		20
-
 struct device;
 struct device_private;
 struct device_driver;
diff --git a/include/linux/dm-log-userspace.h b/include/linux/dm-log-userspace.h
index 642e3017b51..8a1f972c0fe 100644
--- a/include/linux/dm-log-userspace.h
+++ b/include/linux/dm-log-userspace.h
@@ -371,7 +371,18 @@
 	(DM_ULOG_REQUEST_MASK & (request_type))
 
 struct dm_ulog_request {
-	char uuid[DM_UUID_LEN]; /* Ties a request to a specific mirror log */
+	/*
+	 * The local unique identifier (luid) and the universally unique
+	 * identifier (uuid) are used to tie a request to a specific
+	 * mirror log.  A single machine log could probably make due with
+	 * just the 'luid', but a cluster-aware log must use the 'uuid' and
+	 * the 'luid'.  The uuid is what is required for node to node
+	 * communication concerning a particular log, but the 'luid' helps
+	 * differentiate between logs that are being swapped and have the
+	 * same 'uuid'.  (Think "live" and "inactive" device-mapper tables.)
+	 */
+	uint64_t luid;
+	char uuid[DM_UUID_LEN];
 	char padding[7];        /* Padding because DM_UUID_LEN = 129 */
 
 	int32_t error;          /* Used to report back processing errors */
diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h
index 7605c5e9589..00d6a68d042 100644
--- a/include/linux/elfcore.h
+++ b/include/linux/elfcore.h
@@ -122,9 +122,10 @@ static inline void elf_core_copy_kernel_regs(elf_gregset_t *elfregs, struct pt_r
 
 static inline int elf_core_copy_task_regs(struct task_struct *t, elf_gregset_t* elfregs)
 {
-#ifdef ELF_CORE_COPY_TASK_REGS
-	
+#if defined (ELF_CORE_COPY_TASK_REGS)
 	return ELF_CORE_COPY_TASK_REGS(t, elfregs);
+#elif defined (task_pt_regs)
+	elf_core_copy_regs(elfregs, task_pt_regs(t));
 #endif
 	return 0;
 }
diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h
index f45a8ae5f82..3b85ba6479f 100644
--- a/include/linux/eventfd.h
+++ b/include/linux/eventfd.h
@@ -8,10 +8,8 @@
 #ifndef _LINUX_EVENTFD_H
 #define _LINUX_EVENTFD_H
 
-#ifdef CONFIG_EVENTFD
-
-/* For O_CLOEXEC and O_NONBLOCK */
 #include <linux/fcntl.h>
+#include <linux/file.h>
 
 /*
  * CAREFUL: Check include/asm-generic/fcntl.h when defining
@@ -27,16 +25,37 @@
 #define EFD_SHARED_FCNTL_FLAGS (O_CLOEXEC | O_NONBLOCK)
 #define EFD_FLAGS_SET (EFD_SHARED_FCNTL_FLAGS | EFD_SEMAPHORE)
 
+#ifdef CONFIG_EVENTFD
+
+struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx);
+void eventfd_ctx_put(struct eventfd_ctx *ctx);
 struct file *eventfd_fget(int fd);
-int eventfd_signal(struct file *file, int n);
+struct eventfd_ctx *eventfd_ctx_fdget(int fd);
+struct eventfd_ctx *eventfd_ctx_fileget(struct file *file);
+int eventfd_signal(struct eventfd_ctx *ctx, int n);
 
 #else /* CONFIG_EVENTFD */
 
-#define eventfd_fget(fd) ERR_PTR(-ENOSYS)
-static inline int eventfd_signal(struct file *file, int n)
-{ return 0; }
+/*
+ * Ugly ugly ugly error layer to support modules that uses eventfd but
+ * pretend to work in !CONFIG_EVENTFD configurations. Namely, AIO.
+ */
+static inline struct eventfd_ctx *eventfd_ctx_fdget(int fd)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline int eventfd_signal(struct eventfd_ctx *ctx, int n)
+{
+	return -ENOSYS;
+}
+
+static inline void eventfd_ctx_put(struct eventfd_ctx *ctx)
+{
+
+}
 
-#endif /* CONFIG_EVENTFD */
+#endif
 
 #endif /* _LINUX_EVENTFD_H */
 
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 634a5e5aba3..7499b366779 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -874,7 +874,7 @@ struct buffer_head * ext3_getblk (handle_t *, struct inode *, long, int, int *);
 struct buffer_head * ext3_bread (handle_t *, struct inode *, int, int, int *);
 int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
 	sector_t iblock, unsigned long maxblocks, struct buffer_head *bh_result,
-	int create, int extend_disksize);
+	int create);
 
 extern struct inode *ext3_iget(struct super_block *, unsigned long);
 extern int  ext3_write_inode (struct inode *, int);
diff --git a/include/linux/fb.h b/include/linux/fb.h
index dd68358996b..3d4c7048d2e 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -133,6 +133,7 @@ struct dentry;
 #define FB_ACCEL_NEOMAGIC_NM2230 96	/* NeoMagic NM2230              */
 #define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
 #define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
+#define FB_ACCEL_GLAMO		99	/* Smedia Glamo 3362            */
 
 #define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
 #define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
@@ -819,6 +820,7 @@ struct fb_info {
 	int node;
 	int flags;
 	struct mutex lock;		/* Lock for open/release/ioctl funcs */
+	struct mutex mm_lock;		/* Lock for fb_mmap and smem_* fields */
 	struct fb_var_screeninfo var;	/* Current var */
 	struct fb_fix_screeninfo fix;	/* Current fix */
 	struct fb_monspecs monspecs;	/* Current Monitor specs */
diff --git a/include/linux/firewire.h b/include/linux/firewire.h
index 9823946adbc..192d1e43c43 100644
--- a/include/linux/firewire.h
+++ b/include/linux/firewire.h
@@ -127,6 +127,7 @@ struct fw_card {
 	struct delayed_work work;
 	int bm_retries;
 	int bm_generation;
+	__be32 bm_transaction_data[2];
 
 	bool broadcast_channel_allocated;
 	u32 broadcast_channel;
diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h
new file mode 100644
index 00000000000..45ff1849151
--- /dev/null
+++ b/include/linux/flex_array.h
@@ -0,0 +1,49 @@
+#ifndef _FLEX_ARRAY_H
+#define _FLEX_ARRAY_H
+
+#include <linux/types.h>
+#include <asm/page.h>
+
+#define FLEX_ARRAY_PART_SIZE PAGE_SIZE
+#define FLEX_ARRAY_BASE_SIZE PAGE_SIZE
+
+struct flex_array_part;
+
+/*
+ * This is meant to replace cases where an array-like
+ * structure has gotten too big to fit into kmalloc()
+ * and the developer is getting tempted to use
+ * vmalloc().
+ */
+
+struct flex_array {
+	union {
+		struct {
+			int element_size;
+			int total_nr_elements;
+			struct flex_array_part *parts[];
+		};
+		/*
+		 * This little trick makes sure that
+		 * sizeof(flex_array) == PAGE_SIZE
+		 */
+		char padding[FLEX_ARRAY_BASE_SIZE];
+	};
+};
+
+#define FLEX_ARRAY_INIT(size, total) { { {\
+	.element_size = (size),		\
+	.total_nr_elements = (total),	\
+} } }
+
+struct flex_array *flex_array_alloc(int element_size, unsigned int total,
+		gfp_t flags);
+int flex_array_prealloc(struct flex_array *fa, unsigned int start,
+		unsigned int end, gfp_t flags);
+void flex_array_free(struct flex_array *fa);
+void flex_array_free_parts(struct flex_array *fa);
+int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,
+		gfp_t flags);
+void *flex_array_get(struct flex_array *fa, unsigned int element_nr);
+
+#endif /* _FLEX_ARRAY_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0872372184f..73e9b643e45 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1946,6 +1946,7 @@ extern void putname(const char *name);
 extern int register_blkdev(unsigned int, const char *);
 extern void unregister_blkdev(unsigned int, const char *);
 extern struct block_device *bdget(dev_t);
+extern struct block_device *bdgrab(struct block_device *bdev);
 extern void bd_set_size(struct block_device *, loff_t size);
 extern void bd_forget(struct inode *inode);
 extern void bdput(struct block_device *);
@@ -2122,7 +2123,7 @@ extern struct file *do_filp_open(int dfd, const char *pathname,
 		int open_flag, int mode, int acc_mode);
 extern int may_open(struct path *, int, int);
 
-extern int kernel_read(struct file *, unsigned long, char *, unsigned long);
+extern int kernel_read(struct file *, loff_t, char *, unsigned long);
 extern struct file * open_exec(const char *);
  
 /* fs/dcache.c -- generic fs support functions */
@@ -2136,7 +2137,7 @@ extern loff_t default_llseek(struct file *file, loff_t offset, int origin);
 
 extern loff_t vfs_llseek(struct file *file, loff_t offset, int origin);
 
-extern struct inode * inode_init_always(struct super_block *, struct inode *);
+extern int inode_init_always(struct super_block *, struct inode *);
 extern void inode_init_once(struct inode *);
 extern void inode_add_to_lists(struct super_block *, struct inode *);
 extern void iput(struct inode *);
@@ -2163,6 +2164,7 @@ extern void __iget(struct inode * inode);
 extern void iget_failed(struct inode *);
 extern void clear_inode(struct inode *);
 extern void destroy_inode(struct inode *);
+extern void __destroy_inode(struct inode *);
 extern struct inode *new_inode(struct super_block *);
 extern int should_remove_suid(struct dentry *);
 extern int file_remove_suid(struct file *);
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 44848aa830d..4d6f47b5118 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -280,7 +280,7 @@ static inline void __fsnotify_update_dcache_flags(struct dentry *dentry)
 	assert_spin_locked(&dentry->d_lock);
 
 	parent = dentry->d_parent;
-	if (fsnotify_inode_watches_children(parent->d_inode))
+	if (parent->d_inode && fsnotify_inode_watches_children(parent->d_inode))
 		dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED;
 	else
 		dentry->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED;
@@ -352,7 +352,7 @@ extern void fsnotify_unmount_inodes(struct list_head *list);
 /* put here because inotify does some weird stuff when destroying watches */
 extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
 						    void *data, int data_is, const char *name,
-						    u32 cookie);
+						    u32 cookie, gfp_t gfp);
 
 #else
 
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 5c093ffc655..a81170de7f6 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -89,7 +89,9 @@ enum print_line_t {
 	TRACE_TYPE_NO_CONSUME	= 3	/* Handled but ask to not consume */
 };
 
-
+void tracing_generic_entry_update(struct trace_entry *entry,
+				  unsigned long flags,
+				  int pc);
 struct ring_buffer_event *
 trace_current_buffer_lock_reserve(int type, unsigned long len,
 				  unsigned long flags, int pc);
@@ -119,11 +121,9 @@ struct ftrace_event_call {
 	void			*filter;
 	void			*mod;
 
-#ifdef CONFIG_EVENT_PROFILE
-	atomic_t	profile_count;
-	int		(*profile_enable)(struct ftrace_event_call *);
-	void		(*profile_disable)(struct ftrace_event_call *);
-#endif
+	atomic_t		profile_count;
+	int			(*profile_enable)(struct ftrace_event_call *);
+	void			(*profile_disable)(struct ftrace_event_call *);
 };
 
 #define MAX_FILTER_PRED		32
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index d41ed593f79..cf593bf9fd3 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -25,6 +25,11 @@
  *  - add IOCTL message
  *  - add unsolicited notification support
  *  - add POLL message and NOTIFY_POLL notification
+ *
+ * 7.12
+ *  - add umask flag to input argument of open, mknod and mkdir
+ *  - add notification messages for invalidation of inodes and
+ *    directory entries
  */
 
 #ifndef _LINUX_FUSE_H
@@ -36,7 +41,7 @@
 #define FUSE_KERNEL_VERSION 7
 
 /** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 11
+#define FUSE_KERNEL_MINOR_VERSION 12
 
 /** The node ID of the root inode */
 #define FUSE_ROOT_ID 1
@@ -112,6 +117,7 @@ struct fuse_file_lock {
  * INIT request/reply flags
  *
  * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
+ * FUSE_DONT_MASK: don't apply umask to file mode on create operations
  */
 #define FUSE_ASYNC_READ		(1 << 0)
 #define FUSE_POSIX_LOCKS	(1 << 1)
@@ -119,6 +125,7 @@ struct fuse_file_lock {
 #define FUSE_ATOMIC_O_TRUNC	(1 << 3)
 #define FUSE_EXPORT_SUPPORT	(1 << 4)
 #define FUSE_BIG_WRITES		(1 << 5)
+#define FUSE_DONT_MASK		(1 << 6)
 
 /**
  * CUSE INIT request/reply flags
@@ -224,6 +231,8 @@ enum fuse_opcode {
 
 enum fuse_notify_code {
 	FUSE_NOTIFY_POLL   = 1,
+	FUSE_NOTIFY_INVAL_INODE = 2,
+	FUSE_NOTIFY_INVAL_ENTRY = 3,
 	FUSE_NOTIFY_CODE_MAX,
 };
 
@@ -262,14 +271,18 @@ struct fuse_attr_out {
 	struct fuse_attr attr;
 };
 
+#define FUSE_COMPAT_MKNOD_IN_SIZE 8
+
 struct fuse_mknod_in {
 	__u32	mode;
 	__u32	rdev;
+	__u32	umask;
+	__u32	padding;
 };
 
 struct fuse_mkdir_in {
 	__u32	mode;
-	__u32	padding;
+	__u32	umask;
 };
 
 struct fuse_rename_in {
@@ -301,7 +314,14 @@ struct fuse_setattr_in {
 
 struct fuse_open_in {
 	__u32	flags;
+	__u32	unused;
+};
+
+struct fuse_create_in {
+	__u32	flags;
 	__u32	mode;
+	__u32	umask;
+	__u32	padding;
 };
 
 struct fuse_open_out {
@@ -508,4 +528,16 @@ struct fuse_dirent {
 #define FUSE_DIRENT_SIZE(d) \
 	FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen)
 
+struct fuse_notify_inval_inode_out {
+	__u64	ino;
+	__s64	off;
+	__s64	len;
+};
+
+struct fuse_notify_inval_entry_out {
+	__u64	parent;
+	__u32	namelen;
+	__u32	padding;
+};
+
 #endif /* _LINUX_FUSE_H */
diff --git a/include/linux/gen_stats.h b/include/linux/gen_stats.h
index 0ffa41df0ee..710e901085d 100644
--- a/include/linux/gen_stats.h
+++ b/include/linux/gen_stats.h
@@ -22,6 +22,11 @@ struct gnet_stats_basic
 {
 	__u64	bytes;
 	__u32	packets;
+};
+struct gnet_stats_basic_packed
+{
+	__u64	bytes;
+	__u32	packets;
 } __attribute__ ((packed));
 
 /**
diff --git a/include/linux/glamofb.h b/include/linux/glamofb.h
new file mode 100644
index 00000000000..5f9fab5a487
--- /dev/null
+++ b/include/linux/glamofb.h
@@ -0,0 +1,35 @@
+#ifndef _LINUX_GLAMOFB_H
+#define _LINUX_GLAMOFB_H
+
+#include <linux/fb.h>
+
+#ifdef __KERNEL__
+
+struct glamo_core;
+struct glamofb_handle;
+
+struct glamo_fb_platform_data {
+    int width, height;
+
+    int num_modes;
+    struct fb_videomode *modes;
+
+    struct glamo_core *core;
+};
+
+int glamofb_cmd_mode(struct glamofb_handle *gfb, int on);
+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val);
+
+#ifdef CONFIG_MFD_GLAMO
+void glamo_lcm_reset(struct platform_device *pdev, int level);
+#else
+#define glamo_lcm_reset(...) do {} while (0)
+#endif
+
+#endif
+
+#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32)
+#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32)
+#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32)
+
+#endif
diff --git a/include/linux/gta02-vibrator.h b/include/linux/gta02-vibrator.h
new file mode 100644
index 00000000000..be7300b3a39
--- /dev/null
+++ b/include/linux/gta02-vibrator.h
@@ -0,0 +1,10 @@
+#ifndef __LINUX_GTA02_VIBRATOR
+#define __LINUX_GTA02_VIBRATOR
+
+struct gta02_vib_platform_data {
+	int (* enable_fiq)(void);
+	void (*disable_fiq)(void);
+	void (*kick_fiq)(void);
+};
+
+#endif
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 45257475623..8246c697863 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -2,7 +2,9 @@
 #define LINUX_HARDIRQ_H
 
 #include <linux/preempt.h>
+#ifdef CONFIG_PREEMPT
 #include <linux/smp_lock.h>
+#endif
 #include <linux/lockdep.h>
 #include <linux/ftrace_irq.h>
 #include <asm/hardirq.h>
diff --git a/include/linux/hdq.h b/include/linux/hdq.h
new file mode 100644
index 00000000000..377ab387eb3
--- /dev/null
+++ b/include/linux/hdq.h
@@ -0,0 +1,32 @@
+#ifndef __LINUX_HDQ_H__
+#define __LINUX_HDQ_H__
+
+#include <linux/device.h>
+
+#define HDQ_SAMPLE_PERIOD_US	10
+
+/* platform data */
+
+struct hdq_platform_data {
+	/*
+	 * give an opportunity to use us as parent for
+	 * devices that depend on us
+	 */
+	void (*attach_child_devices)(struct device *parent_device);
+	
+	void (*gpio_dir_out)(void);
+	void (*gpio_dir_in)(void);
+	void (*gpio_set)(int);
+	int (*gpio_get)(void);
+
+	int (*enable_fiq)(void);
+	void (*disable_fiq)(void);
+	void (*kick_fiq)(void);
+
+};
+
+int hdq_read(int address);
+int hdq_write(int address, u8 data);
+int hdq_initialized(void);
+
+#endif
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 7400900de94..4759917adc7 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -21,6 +21,7 @@
 #include <linux/list.h>
 #include <linux/wait.h>
 #include <linux/percpu.h>
+#include <linux/timer.h>
 
 
 struct hrtimer_clock_base;
@@ -447,6 +448,8 @@ extern void timer_stats_update_stats(void *timer, pid_t pid, void *startf,
 
 static inline void timer_stats_account_hrtimer(struct hrtimer *timer)
 {
+	if (likely(!timer->start_site))
+		return;
 	timer_stats_update_stats(timer, timer->start_pid, timer->start_site,
 				 timer->function, timer->start_comm, 0);
 }
@@ -456,6 +459,8 @@ extern void __timer_stats_hrtimer_set_start_info(struct hrtimer *timer,
 
 static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer)
 {
+	if (likely(!timer_stats_active))
+		return;
 	__timer_stats_hrtimer_set_start_info(timer, __builtin_return_address(0));
 }
 
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 2723513a565..5cbc620bdfe 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -10,6 +10,7 @@
 #include <asm/tlbflush.h>
 
 struct ctl_table;
+struct user_struct;
 
 int PageHuge(struct page *page);
 
@@ -146,7 +147,8 @@ static inline struct hugetlbfs_sb_info *HUGETLBFS_SB(struct super_block *sb)
 
 extern const struct file_operations hugetlbfs_file_operations;
 extern struct vm_operations_struct hugetlb_vm_ops;
-struct file *hugetlb_file_setup(const char *name, size_t, int);
+struct file *hugetlb_file_setup(const char *name, size_t size, int acct,
+						struct user_struct **user);
 int hugetlb_get_quota(struct address_space *mapping, long delta);
 void hugetlb_put_quota(struct address_space *mapping, long delta);
 
@@ -168,7 +170,7 @@ static inline void set_file_hugepages(struct file *file)
 
 #define is_file_hugepages(file)			0
 #define set_file_hugepages(file)		BUG()
-#define hugetlb_file_setup(name,size,acctflag)	ERR_PTR(-ENOSYS)
+#define hugetlb_file_setup(name,size,acct,user)	ERR_PTR(-ENOSYS)
 
 #endif /* !CONFIG_HUGETLBFS */
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 95c6e00a72e..edc93a6d931 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1062,7 +1062,6 @@ int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned l
 extern int ide_vlb_clk;
 extern int ide_pci_clk;
 
-unsigned int ide_rq_bytes(struct request *);
 int ide_end_rq(ide_drive_t *, struct request *, int, unsigned int);
 void ide_kill_rq(ide_drive_t *, struct request *);
 
@@ -1361,7 +1360,6 @@ int ide_in_drive_list(u16 *, const struct drive_list_entry *);
 #ifdef CONFIG_BLK_DEV_IDEDMA
 int ide_dma_good_drive(ide_drive_t *);
 int __ide_dma_bad_drive(ide_drive_t *);
-int ide_id_dma_bug(ide_drive_t *);
 
 u8 ide_find_dma_mode(ide_drive_t *, u8);
 
@@ -1402,7 +1400,6 @@ void ide_dma_lost_irq(ide_drive_t *);
 ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
 
 #else
-static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
 static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
 static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
@@ -1422,6 +1419,7 @@ static inline void ide_dma_unmap_sg(ide_drive_t *drive,
 
 #ifdef CONFIG_BLK_DEV_IDEACPI
 int ide_acpi_init(void);
+bool ide_port_acpi(ide_hwif_t *hwif);
 extern int ide_acpi_exec_tfs(ide_drive_t *drive);
 extern void ide_acpi_get_timing(ide_hwif_t *hwif);
 extern void ide_acpi_push_timing(ide_hwif_t *hwif);
@@ -1430,6 +1428,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *);
 extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
 #else
 static inline int ide_acpi_init(void) { return 0; }
+static inline bool ide_port_acpi(ide_hwif_t *hwif) { return 0; }
 static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
 static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
 static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index ae3a1871413..70fdba2bbf7 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -78,6 +78,7 @@
 #define ETH_P_PAE	0x888E		/* Port Access Entity (IEEE 802.1X) */
 #define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
 #define ETH_P_TIPC	0x88CA		/* TIPC 			*/
+#define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
 #define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
 #define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
 #define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
diff --git a/include/linux/ima.h b/include/linux/ima.h
index b1b827d091a..0e3f2a4c25f 100644
--- a/include/linux/ima.h
+++ b/include/linux/ima.h
@@ -24,6 +24,7 @@ extern int ima_path_check(struct path *path, int mask, int update_counts);
 extern void ima_file_free(struct file *file);
 extern int ima_file_mmap(struct file *file, unsigned long prot);
 extern void ima_counts_get(struct file *file);
+extern void ima_counts_put(struct path *path, int mask);
 
 #else
 static inline int ima_bprm_check(struct linux_binprm *bprm)
@@ -60,5 +61,10 @@ static inline void ima_counts_get(struct file *file)
 {
 	return;
 }
+
+static inline void ima_counts_put(struct path *path, int mask)
+{
+	return;
+}
 #endif /* CONFIG_IMA_H */
 #endif /* _LINUX_IMA_H */
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index acef2a770b6..ad27c7da879 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -82,7 +82,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev)
 
 #define IN_DEV_FORWARD(in_dev)		IN_DEV_CONF_GET((in_dev), FORWARDING)
 #define IN_DEV_MFORWARD(in_dev)		IN_DEV_ANDCONF((in_dev), MC_FORWARDING)
-#define IN_DEV_RPFILTER(in_dev)		IN_DEV_ANDCONF((in_dev), RP_FILTER)
+#define IN_DEV_RPFILTER(in_dev)		IN_DEV_MAXCONF((in_dev), RP_FILTER)
 #define IN_DEV_SOURCE_ROUTE(in_dev)	IN_DEV_ANDCONF((in_dev), \
 						       ACCEPT_SOURCE_ROUTE)
 #define IN_DEV_BOOTP_RELAY(in_dev)	IN_DEV_ANDCONF((in_dev), BOOTP_RELAY)
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 5368fbdc780..7fc01b13be4 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -183,5 +183,8 @@ extern struct cred init_cred;
 	LIST_HEAD_INIT(cpu_timers[2]),					\
 }
 
+/* Attach to the init_task data structure for proper alignment */
+#define __init_task_data __attribute__((__section__(".data.init_task")))
+
 
 #endif
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
new file mode 100644
index 00000000000..15d5903af2d
--- /dev/null
+++ b/include/linux/input/matrix_keypad.h
@@ -0,0 +1,66 @@
+#ifndef _MATRIX_KEYPAD_H
+#define _MATRIX_KEYPAD_H
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+#define MATRIX_MAX_ROWS		16
+#define MATRIX_MAX_COLS		16
+
+#define KEY(row, col, val)	((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\
+				 (((col) & (MATRIX_MAX_COLS - 1)) << 16) |\
+				 (val & 0xffff))
+
+#define KEY_ROW(k)		(((k) >> 24) & 0xff)
+#define KEY_COL(k)		(((k) >> 16) & 0xff)
+#define KEY_VAL(k)		((k) & 0xffff)
+
+#define MATRIX_SCAN_CODE(row, col, row_shift)	(((row) << (row_shift)) + (col))
+
+/**
+ * struct matrix_keymap_data - keymap for matrix keyboards
+ * @keymap: pointer to array of uint32 values encoded with KEY() macro
+ *	representing keymap
+ * @keymap_size: number of entries (initialized) in this keymap
+ *
+ * This structure is supposed to be used by platform code to supply
+ * keymaps to drivers that implement matrix-like keypads/keyboards.
+ */
+struct matrix_keymap_data {
+	const uint32_t *keymap;
+	unsigned int	keymap_size;
+};
+
+/**
+ * struct matrix_keypad_platform_data - platform-dependent keypad data
+ * @keymap_data: pointer to &matrix_keymap_data
+ * @row_gpios: pointer to array of gpio numbers representing rows
+ * @col_gpios: pointer to array of gpio numbers reporesenting colums
+ * @num_row_gpios: actual number of row gpios used by device
+ * @num_col_gpios: actual number of col gpios used by device
+ * @col_scan_delay_us: delay, measured in microseconds, that is
+ *	needed before we can keypad after activating column gpio
+ * @debounce_ms: debounce interval in milliseconds
+ *
+ * This structure represents platform-specific data that use used by
+ * matrix_keypad driver to perform proper initialization.
+ */
+struct matrix_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
+
+	const unsigned int *row_gpios;
+	const unsigned int *col_gpios;
+
+	unsigned int	num_row_gpios;
+	unsigned int	num_col_gpios;
+
+	unsigned int	col_scan_delay_us;
+
+	/* key debounce interval in milli-second */
+	unsigned int	debounce_ms;
+
+	bool		active_low;
+	bool		wakeup;
+};
+
+#endif /* _MATRIX_KEYPAD_H */
diff --git a/include/linux/input/touchscreen/ts_filter.h b/include/linux/input/touchscreen/ts_filter.h
new file mode 100644
index 00000000000..632e5fb3f4e
--- /dev/null
+++ b/include/linux/input/touchscreen/ts_filter.h
@@ -0,0 +1,74 @@
+#ifndef __TS_FILTER_H__
+#define __TS_FILTER_H__
+
+/*
+ * Touchscreen filter.
+ *
+ * (c) 2008,2009 Andy Green <andy@warmcat.com>
+ */
+
+#include <linux/platform_device.h>
+
+#define MAX_TS_FILTER_COORDS		3  /* X, Y and Z (pressure). */
+
+struct ts_filter;
+struct ts_filter_configuration;
+
+/* Operations that a filter can perform. */
+
+struct ts_filter_api {
+	/* Create the filter - mandatory. */
+	struct ts_filter * (*create)(
+		struct platform_device *pdev,
+		const struct ts_filter_configuration *config,
+		int count_coords);
+	/* Destroy the filter - mandatory. */
+	void (*destroy)(struct ts_filter *filter);
+	/* Clear the filter - optional. */
+	void (*clear)(struct ts_filter *filter);
+
+
+	/*
+	 * The next three API functions only make sense if all of them are
+	 * set for a filter. If a filter has the next three methods then
+	 * it can propagate coordinates in the chain.
+	 */
+
+	/*
+	 * Process the filter.
+	 * It returns non-zero if the filter reaches an error.
+	 */
+	int (*process)(struct ts_filter *filter, int *coords);
+	/*
+	 * Is the filter ready to return a point?
+	 * Please do not code side effects in this function.
+	 */
+	int (*haspoint)(struct ts_filter *filter);
+	/*
+	 * Get a point.
+	 * Do not call unless the filter actually has a point to deliver.
+	 */
+	void (*getpoint)(struct ts_filter *filter, int *coords);
+
+	/*
+	 * Scale the points - optional.
+	 * A filter could only scale coordinates.
+	 */
+	void (*scale)(struct ts_filter *filter, int *coords);
+};
+
+/*
+ * Generic filter configuration. Actual configurations have this structure
+ * as a member.
+ */
+struct ts_filter_configuration {
+};
+
+struct ts_filter {
+	/* Operations for this filter. */
+	const struct ts_filter_api *api;
+	/* Number of coordinates to process. */
+	int count_coords;
+};
+
+#endif
diff --git a/include/linux/input/touchscreen/ts_filter_chain.h b/include/linux/input/touchscreen/ts_filter_chain.h
new file mode 100644
index 00000000000..a021ba25bd4
--- /dev/null
+++ b/include/linux/input/touchscreen/ts_filter_chain.h
@@ -0,0 +1,58 @@
+#ifndef __TS_FILTER_CHAIN_H__
+#define __TS_FILTER_CHAIN_H__
+
+/*
+ * Touchscreen filter chains.
+ *
+ * (c) 2008,2009 Andy Green <andy@warmcat.com>
+ */
+
+#include <linux/input/touchscreen/ts_filter.h>
+
+#include <linux/err.h>
+
+struct ts_filter_chain_configuration {
+	/* API to use. */
+	const struct ts_filter_api *api;
+	/* Generic filter configuration. Different for each filter. */
+	const struct ts_filter_configuration *config;
+};
+
+struct ts_filter_chain;
+
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+
+/*
+ * Create a filter chain. It will allocate an array of
+ * null-terminated pointers to filters. On error it will return
+ * an error you can check with IS_ERR.
+ */
+extern struct ts_filter_chain *ts_filter_chain_create(
+	struct platform_device *pdev,
+	const struct ts_filter_chain_configuration conf[],
+	int count_coords);
+
+/* Destroy the chain. */
+extern void ts_filter_chain_destroy(struct ts_filter_chain *c);
+
+/* Clear the filter chain. */
+extern void ts_filter_chain_clear(struct ts_filter_chain *c);
+
+/*
+ * Try to get one point. Returns 0 if no points are available.
+ * coords will be used as temporal space, thus you supply a point
+ * using coords but you shouldn't rely on its value on return unless
+ * it returns a nonzero value that is not -1.
+ * If one of the filters find an error then this function will
+ * return -1.
+ */
+int ts_filter_chain_feed(struct ts_filter_chain *c, int *coords);
+
+#else /* !CONFIG_TOUCHSCREEN_FILTER */
+#define ts_filter_chain_create(pdev, config, count_coords) (NULL)
+#define ts_filter_chain_destroy(c) do { } while (0)
+#define ts_filter_chain_clear(c) do { } while (0)
+#define ts_filter_chain_feed(c, coords) (1)
+#endif
+
+#endif
diff --git a/include/linux/input/touchscreen/ts_filter_group.h b/include/linux/input/touchscreen/ts_filter_group.h
new file mode 100644
index 00000000000..2d727f30086
--- /dev/null
+++ b/include/linux/input/touchscreen/ts_filter_group.h
@@ -0,0 +1,36 @@
+#ifndef __TS_FILTER_GROUP_H__
+#define __TS_FILTER_GROUP_H__
+
+#include <linux/input/touchscreen/ts_filter.h>
+
+/*
+ * Touchscreen group filter.
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ *
+ */
+
+struct ts_filter_group_configuration {
+	/* Size of the filter. */
+	int length;
+	/*
+	 * If two points are separated by this distance or less they
+	 * are considered to be members of the same group.
+	 */
+	int close_enough;
+	/* Minimum allowed size for the biggest group in the sample set. */
+	int threshold;
+	/*
+	 * Number of times we try to get a group of points with at least
+	 * threshold points.
+	 */
+	int attempts;
+
+	/* Generic filter configuration. */
+	struct ts_filter_configuration config;
+};
+
+extern const struct ts_filter_api ts_filter_group_api;
+
+#endif
diff --git a/include/linux/input/touchscreen/ts_filter_linear.h b/include/linux/input/touchscreen/ts_filter_linear.h
new file mode 100644
index 00000000000..6f5e8307456
--- /dev/null
+++ b/include/linux/input/touchscreen/ts_filter_linear.h
@@ -0,0 +1,31 @@
+#ifndef __TS_FILTER_LINEAR_H__
+#define __TS_FILTER_LINEAR_H__
+
+#include <linux/input/touchscreen/ts_filter.h>
+#include <linux/kobject.h>
+
+/*
+ * Touchscreen linear filter.
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ *
+ */
+
+#define TS_FILTER_LINEAR_NCONSTANTS 7
+
+struct ts_filter_linear_configuration {
+	/* Calibration constants. */
+	int constants[TS_FILTER_LINEAR_NCONSTANTS];
+	/* First coordinate. */
+	int coord0;
+	/* Second coordinate. */
+	int coord1;
+
+	/* Generic filter configuration. */
+	struct ts_filter_configuration config;
+};
+
+extern const struct ts_filter_api ts_filter_linear_api;
+
+#endif
diff --git a/include/linux/input/touchscreen/ts_filter_mean.h b/include/linux/input/touchscreen/ts_filter_mean.h
new file mode 100644
index 00000000000..d4870413987
--- /dev/null
+++ b/include/linux/input/touchscreen/ts_filter_mean.h
@@ -0,0 +1,28 @@
+#ifndef __TS_FILTER_MEAN_H__
+#define __TS_FILTER_MEAN_H__
+
+#include <linux/input/touchscreen/ts_filter.h>
+
+/*
+ * Touchscreen filter.
+ *
+ * mean
+ *
+ * (c) 2008,2009
+ *     Andy Green <andy@warmcat.com>
+ *     Nelson Castillo <arhuaco@freaks-unidos.net>
+ */
+
+/* Configuration for this filter. */
+struct ts_filter_mean_configuration {
+	/* Number of points for the mean. */
+	int length;
+
+	/* Generic filter configuration. */
+	struct ts_filter_configuration config;
+};
+
+/* API functions for the mean filter */
+extern const struct ts_filter_api ts_filter_mean_api;
+
+#endif /* __TS_FILTER_MEAN_H__ */
diff --git a/include/linux/input/touchscreen/ts_filter_median.h b/include/linux/input/touchscreen/ts_filter_median.h
new file mode 100644
index 00000000000..08051619531
--- /dev/null
+++ b/include/linux/input/touchscreen/ts_filter_median.h
@@ -0,0 +1,32 @@
+#ifndef __TS_FILTER_MEDIAN_H__
+#define __TS_FILTER_MEDIAN_H__
+
+#include <linux/input/touchscreen/ts_filter.h>
+
+/*
+ * Touchscreen filter.
+ *
+ * median
+ *
+ * (c) 2008 Andy Green <andy@warmcat.com>
+ */
+
+struct ts_filter_median_configuration {
+	/* Size of the filter. */
+	int extent;
+	/* Precomputed midpoint. */
+	int midpoint;
+	/* A reference value for us to check if we are going fast or slow. */
+	int decimation_threshold;
+	/* How many points to replace if we're going fast. */
+	int decimation_above;
+	/* How many points to replace if we're going slow. */
+	int decimation_below;
+
+	/* Generic configuration. */
+	struct ts_filter_configuration config;
+};
+
+extern const struct ts_filter_api ts_filter_median_api;
+
+#endif
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 2721f07e935..35e7df1e9f3 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -14,6 +14,7 @@
 #include <linux/irqflags.h>
 #include <linux/smp.h>
 #include <linux/percpu.h>
+#include <linux/hrtimer.h>
 
 #include <asm/atomic.h>
 #include <asm/ptrace.h>
@@ -64,11 +65,13 @@
  * IRQTF_RUNTHREAD - signals that the interrupt handler thread should run
  * IRQTF_DIED      - handler thread died
  * IRQTF_WARNED    - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed
+ * IRQTF_AFFINITY  - irq thread is requested to adjust affinity
  */
 enum {
 	IRQTF_RUNTHREAD,
 	IRQTF_DIED,
 	IRQTF_WARNED,
+	IRQTF_AFFINITY,
 };
 
 typedef irqreturn_t (*irq_handler_t)(int, void *);
@@ -517,6 +520,31 @@ extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
 extern void tasklet_init(struct tasklet_struct *t,
 			 void (*func)(unsigned long), unsigned long data);
 
+struct tasklet_hrtimer {
+	struct hrtimer		timer;
+	struct tasklet_struct	tasklet;
+	enum hrtimer_restart	(*function)(struct hrtimer *);
+};
+
+extern void
+tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer,
+		     enum hrtimer_restart (*function)(struct hrtimer *),
+		     clockid_t which_clock, enum hrtimer_mode mode);
+
+static inline
+int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time,
+			  const enum hrtimer_mode mode)
+{
+	return hrtimer_start(&ttimer->timer, time, mode);
+}
+
+static inline
+void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer)
+{
+	hrtimer_cancel(&ttimer->timer);
+	tasklet_kill(&ttimer->tasklet);
+}
+
 /*
  * Autoprobing for irqs:
  *
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index dd05434fa45..4da4a75c3f1 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -92,7 +92,7 @@ static inline struct io_context *ioc_task_link(struct io_context *ioc)
 	 * a race).
 	 */
 	if (ioc && atomic_long_inc_not_zero(&ioc->refcount)) {
-		atomic_long_inc(&ioc->refcount);
+		atomic_inc(&ioc->nr_tasks);
 		return ioc;
 	}
 
diff --git a/include/linux/jbt6k74.h b/include/linux/jbt6k74.h
new file mode 100644
index 00000000000..75488c41136
--- /dev/null
+++ b/include/linux/jbt6k74.h
@@ -0,0 +1,21 @@
+#ifndef __JBT6K74_H__
+#define __JBT6K74_H__
+
+#include <linux/spi/spi.h>
+
+/*
+ *  struct jbt6k74_platform_data - Platform data for jbt6k74 driver
+ *  @probe_completed: Callback to be called when the driver has been
+ *  successfully probed.
+ *  @enable_pixel_clock: Callback to enable or disable the pixelclock of the
+ *  gpu.
+ *  @gpio_reset: Reset gpio pin number.
+ */
+struct jbt6k74_platform_data {
+	void (*probe_completed)(struct device *dev);
+	void (*enable_pixel_clock)(struct device *dev, int enable);
+
+	int gpio_reset;
+};
+
+#endif
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index fac104e7186..d6320a3e8de 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -303,6 +303,7 @@ extern int oops_in_progress;		/* If set, an oops, panic(), BUG() or die() is in
 extern int panic_timeout;
 extern int panic_on_oops;
 extern int panic_on_unrecovered_nmi;
+extern int panic_on_io_nmi;
 extern const char *print_tainted(void);
 extern void add_taint(unsigned flag);
 extern int test_taint(unsigned flag);
diff --git a/include/linux/kmemleak.h b/include/linux/kmemleak.h
index 7796aed6cdd..6a63807f714 100644
--- a/include/linux/kmemleak.h
+++ b/include/linux/kmemleak.h
@@ -27,6 +27,7 @@ extern void kmemleak_init(void);
 extern void kmemleak_alloc(const void *ptr, size_t size, int min_count,
 			   gfp_t gfp);
 extern void kmemleak_free(const void *ptr);
+extern void kmemleak_free_part(const void *ptr, size_t size);
 extern void kmemleak_padding(const void *ptr, unsigned long offset,
 			     size_t size);
 extern void kmemleak_not_leak(const void *ptr);
@@ -71,6 +72,9 @@ static inline void kmemleak_alloc_recursive(const void *ptr, size_t size,
 static inline void kmemleak_free(const void *ptr)
 {
 }
+static inline void kmemleak_free_part(const void *ptr, size_t size)
+{
+}
 static inline void kmemleak_free_recursive(const void *ptr, unsigned long flags)
 {
 }
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index aacc5449f58..3060bdc35ff 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -110,6 +110,7 @@ struct kvm_memory_slot {
 
 struct kvm_kernel_irq_routing_entry {
 	u32 gsi;
+	u32 type;
 	int (*set)(struct kvm_kernel_irq_routing_entry *e,
 		    struct kvm *kvm, int level);
 	union {
@@ -125,6 +126,7 @@ struct kvm_kernel_irq_routing_entry {
 struct kvm {
 	struct mutex lock; /* protects the vcpus array and APIC accesses */
 	spinlock_t mmu_lock;
+	spinlock_t requests_lock;
 	struct rw_semaphore slots_lock;
 	struct mm_struct *mm; /* userspace tied to this vm */
 	int nmemslots;
diff --git a/include/linux/leds-lp3944.h b/include/linux/leds-lp3944.h
new file mode 100644
index 00000000000..afc9f9fd70f
--- /dev/null
+++ b/include/linux/leds-lp3944.h
@@ -0,0 +1,53 @@
+/*
+ * leds-lp3944.h - platform data structure for lp3944 led controller
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LINUX_LEDS_LP3944_H
+#define __LINUX_LEDS_LP3944_H
+
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+
+#define LP3944_LED0 0
+#define LP3944_LED1 1
+#define LP3944_LED2 2
+#define LP3944_LED3 3
+#define LP3944_LED4 4
+#define LP3944_LED5 5
+#define LP3944_LED6 6
+#define LP3944_LED7 7
+#define LP3944_LEDS_MAX 8
+
+#define LP3944_LED_STATUS_MASK	0x03
+enum lp3944_status {
+	LP3944_LED_STATUS_OFF  = 0x0,
+	LP3944_LED_STATUS_ON   = 0x1,
+	LP3944_LED_STATUS_DIM0 = 0x2,
+	LP3944_LED_STATUS_DIM1 = 0x3
+};
+
+enum lp3944_type {
+	LP3944_LED_TYPE_NONE,
+	LP3944_LED_TYPE_LED,
+	LP3944_LED_TYPE_LED_INVERTED,
+};
+
+struct lp3944_led {
+	char *name;
+	enum lp3944_type type;
+	enum lp3944_status status;
+};
+
+struct lp3944_platform_data {
+	struct lp3944_led leds[LP3944_LEDS_MAX];
+	u8 leds_size;
+};
+
+#endif /* __LINUX_LEDS_LP3944_H */
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 376fe07732e..d8bf9665e70 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -45,7 +45,10 @@ struct led_classdev {
 	/* Get LED brightness level */
 	enum led_brightness (*brightness_get)(struct led_classdev *led_cdev);
 
-	/* Activate hardware accelerated blink */
+	/* Activate hardware accelerated blink, delays are in
+	 * miliseconds and if none is provided then a sensible default
+	 * should be chosen. The call can adjust the timings if it can't
+	 * match the values specified exactly. */
 	int		(*blink_set)(struct led_classdev *led_cdev,
 				     unsigned long *delay_on,
 				     unsigned long *delay_off);
@@ -141,9 +144,14 @@ struct gpio_led {
 	const char *name;
 	const char *default_trigger;
 	unsigned 	gpio;
-	u8 		active_low : 1;
-	u8		retain_state_suspended : 1;
+	unsigned	active_low : 1;
+	unsigned	retain_state_suspended : 1;
+	unsigned	default_state : 2;
+	/* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
 };
+#define LEDS_GPIO_DEFSTATE_OFF	0
+#define LEDS_GPIO_DEFSTATE_ON	1
+#define LEDS_GPIO_DEFSTATE_KEEP	2
 
 struct gpio_led_platform_data {
 	int 		num_leds;
diff --git a/include/linux/lguest.h b/include/linux/lguest.h
index 7bc1440fc47..2fb1dcbcb5a 100644
--- a/include/linux/lguest.h
+++ b/include/linux/lguest.h
@@ -1,5 +1,7 @@
-/* Things the lguest guest needs to know.  Note: like all lguest interfaces,
- * this is subject to wild and random change between versions. */
+/*
+ * Things the lguest guest needs to know.  Note: like all lguest interfaces,
+ * this is subject to wild and random change between versions.
+ */
 #ifndef _LINUX_LGUEST_H
 #define _LINUX_LGUEST_H
 
@@ -11,32 +13,41 @@
 #define LG_CLOCK_MIN_DELTA	100UL
 #define LG_CLOCK_MAX_DELTA	ULONG_MAX
 
-/*G:032 The second method of communicating with the Host is to via "struct
+/*G:031
+ * The second method of communicating with the Host is to via "struct
  * lguest_data".  Once the Guest's initialization hypercall tells the Host where
- * this is, the Guest and Host both publish information in it. :*/
-struct lguest_data
-{
-	/* 512 == enabled (same as eflags in normal hardware).  The Guest
-	 * changes interrupts so often that a hypercall is too slow. */
+ * this is, the Guest and Host both publish information in it.
+:*/
+struct lguest_data {
+	/*
+	 * 512 == enabled (same as eflags in normal hardware).  The Guest
+	 * changes interrupts so often that a hypercall is too slow.
+	 */
 	unsigned int irq_enabled;
 	/* Fine-grained interrupt disabling by the Guest */
 	DECLARE_BITMAP(blocked_interrupts, LGUEST_IRQS);
 
-	/* The Host writes the virtual address of the last page fault here,
+	/*
+	 * The Host writes the virtual address of the last page fault here,
 	 * which saves the Guest a hypercall.  CR2 is the native register where
-	 * this address would normally be found. */
+	 * this address would normally be found.
+	 */
 	unsigned long cr2;
 
 	/* Wallclock time set by the Host. */
 	struct timespec time;
 
-	/* Interrupt pending set by the Host.  The Guest should do a hypercall
-	 * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF). */
+	/*
+	 * Interrupt pending set by the Host.  The Guest should do a hypercall
+	 * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF).
+	 */
 	int irq_pending;
 
-	/* Async hypercall ring.  Instead of directly making hypercalls, we can
+	/*
+	 * Async hypercall ring.  Instead of directly making hypercalls, we can
 	 * place them in here for processing the next time the Host wants.
-	 * This batching can be quite efficient. */
+	 * This batching can be quite efficient.
+	 */
 
 	/* 0xFF == done (set by Host), 0 == pending (set by Guest). */
 	u8 hcall_status[LHCALL_RING_SIZE];
diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h
index bfefbdf7498..495203ff221 100644
--- a/include/linux/lguest_launcher.h
+++ b/include/linux/lguest_launcher.h
@@ -29,8 +29,10 @@ struct lguest_device_desc {
 	__u8 type;
 	/* The number of virtqueues (first in config array) */
 	__u8 num_vq;
-	/* The number of bytes of feature bits.  Multiply by 2: one for host
-	 * features and one for Guest acknowledgements. */
+	/*
+	 * The number of bytes of feature bits.  Multiply by 2: one for host
+	 * features and one for Guest acknowledgements.
+	 */
 	__u8 feature_len;
 	/* The number of bytes of the config array after virtqueues. */
 	__u8 config_len;
@@ -39,8 +41,10 @@ struct lguest_device_desc {
 	__u8 config[0];
 };
 
-/*D:135 This is how we expect the device configuration field for a virtqueue
- * to be laid out in config space. */
+/*D:135
+ * This is how we expect the device configuration field for a virtqueue
+ * to be laid out in config space.
+ */
 struct lguest_vqconfig {
 	/* The number of entries in the virtio_ring */
 	__u16 num;
@@ -61,7 +65,9 @@ enum lguest_req
 	LHREQ_EVENTFD, /* + address, fd. */
 };
 
-/* The alignment to use between consumer and producer parts of vring.
- * x86 pagesize for historical reasons. */
+/*
+ * The alignment to use between consumer and producer parts of vring.
+ * x86 pagesize for historical reasons.
+ */
 #define LGUEST_VRING_ALIGN	4096
 #endif /* _LINUX_LGUEST_LAUNCHER */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 3d501db36a2..e5b6e33c657 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -385,6 +385,7 @@ enum {
 						    not multiple of 16 bytes */
 	ATA_HORKAGE_FIRMWARE_WARN = (1 << 12),	/* firmware update warning */
 	ATA_HORKAGE_1_5_GBPS	= (1 << 13),	/* force 1.5 Gbps */
+	ATA_HORKAGE_NOSETXFER	= (1 << 14),	/* skip SETXFER, SATA only */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */
@@ -588,6 +589,7 @@ struct ata_device {
 #endif
 	/* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
 	u64			n_sectors;	/* size of device, if ATA */
+	u64			n_native_sectors; /* native size, if ATA */
 	unsigned int		class;		/* ATA_DEV_xxx */
 	unsigned long		unpark_deadline;
 
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index fee9e59649c..691f59171c6 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -22,6 +22,15 @@
 #define __page_aligned_bss	__section(.bss.page_aligned) __aligned(PAGE_SIZE)
 
 /*
+ * For assembly routines.
+ *
+ * Note when using these that you must specify the appropriate
+ * alignment directives yourself
+ */
+#define __PAGE_ALIGNED_DATA	.section ".data.page_aligned", "aw"
+#define __PAGE_ALIGNED_BSS	.section ".bss.page_aligned", "aw"
+
+/*
  * This is used by architectures to keep arguments on the stack
  * untouched by the compiler by keeping them live until the end.
  * The argument stack may be owned by the assembly-language
diff --git a/include/linux/lmb.h b/include/linux/lmb.h
index c46c89505da..2442e3f3d03 100644
--- a/include/linux/lmb.h
+++ b/include/linux/lmb.h
@@ -51,7 +51,7 @@ extern u64 __init lmb_alloc_base(u64 size,
 extern u64 __init __lmb_alloc_base(u64 size,
 		u64 align, u64 max_addr);
 extern u64 __init lmb_phys_mem_size(void);
-extern u64 __init lmb_end_of_DRAM(void);
+extern u64 lmb_end_of_DRAM(void);
 extern void __init lmb_enforce_memory_limit(u64 memory_limit);
 extern int __init lmb_is_reserved(u64 addr);
 extern int lmb_find(struct lmb_property *res);
diff --git a/include/linux/mfd/glamo.h b/include/linux/mfd/glamo.h
new file mode 100644
index 00000000000..529d4f07f03
--- /dev/null
+++ b/include/linux/mfd/glamo.h
@@ -0,0 +1,52 @@
+#ifndef __GLAMO_MFD_H
+#define __GLAMO_MFD_H
+
+struct glamo_core;
+struct glamo_spigpio_platform_data;
+struct glamo_fb_platform_data;
+
+struct glamo_mmc_platform_data {
+	int	(*glamo_mmc_use_slow)(void);
+
+	struct glamo_core *core;
+};
+
+struct glamo_gpio_platform_data {
+	int base;
+	void (*registered)(struct device *dev);
+};
+
+struct glamo_platform_data {
+	struct glamo_fb_platform_data	*fb_data;
+	struct glamo_mmc_platform_data	*mmc_data;
+	struct glamo_gpio_platform_data	*gpio_data;
+
+	unsigned int osci_clock_rate;
+
+	void (*glamo_external_reset)(int);
+};
+
+enum glamo_engine {
+	GLAMO_ENGINE_CAPTURE = 0,
+	GLAMO_ENGINE_ISP = 1,
+	GLAMO_ENGINE_JPEG = 2,
+	GLAMO_ENGINE_MPEG_ENC = 3,
+	GLAMO_ENGINE_MPEG_DEC = 4,
+	GLAMO_ENGINE_LCD = 5,
+	GLAMO_ENGINE_CMDQ = 6,
+	GLAMO_ENGINE_2D = 7,
+	GLAMO_ENGINE_3D = 8,
+	GLAMO_ENGINE_MMC = 9,
+	GLAMO_ENGINE_MICROP0 = 10,
+	GLAMO_ENGINE_RISC = 11,
+	GLAMO_ENGINE_MICROP1_MPEG_ENC = 12,
+	GLAMO_ENGINE_MICROP1_MPEG_DEC = 13,
+#if 0
+	GLAMO_ENGINE_H264_DEC = 14,
+	GLAMO_ENGINE_RISC1 = 15,
+	GLAMO_ENGINE_SPI = 16,
+#endif
+	__NUM_GLAMO_ENGINES
+};
+
+#endif
diff --git a/include/linux/mfd/pcf50633/backlight.h b/include/linux/mfd/pcf50633/backlight.h
new file mode 100644
index 00000000000..9d3646af056
--- /dev/null
+++ b/include/linux/mfd/pcf50633/backlight.h
@@ -0,0 +1,44 @@
+/*
+ *  Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ *  	PCF50633 backlight device driver
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __LINUX_MFD_PCF50633_BACKLIGHT
+#define __LINUX_MFD_PCF50633_BACKLIGHT
+
+/*
+* @default_brightness:       Brightness to be used after the driver has been
+                             probed. Valid range 0-63.
+* @default_brightness_limit: Brightness limit to be used after the driver has
+*                            been probed. This is usfull when it is not known
+*                            how much power is available for the backlight
+*                            during probe. Valid range 0-63
+* @ramp_time:                When changing the backlights brightness the change
+*                            is not instant, instead it fades smooth from one
+*                            state to another. This value specifies how long the
+*                            fade should take. The lower the value the higher
+*                            the fade time. Valid range 0-255
+*/
+struct pcf50633_bl_platform_data {
+	unsigned int	default_brightness;
+	unsigned int	default_brightness_limit;
+	uint8_t		ramp_time;
+};
+
+
+struct pcf50633;
+
+int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit);
+
+#endif
+
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
index c8f51c3c0a7..42f9af553ed 100644
--- a/include/linux/mfd/pcf50633/core.h
+++ b/include/linux/mfd/pcf50633/core.h
@@ -18,6 +18,7 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/power_supply.h>
+#include <linux/mfd/pcf50633/backlight.h>
 
 struct pcf50633;
 
@@ -29,7 +30,7 @@ struct pcf50633_platform_data {
 	char **batteries;
 	int num_batteries;
 
-	int charging_restart_interval;
+	int chg_ref_current_ma;
 
 	/* Callbacks */
 	void (*probe_done)(struct pcf50633 *);
@@ -38,10 +39,8 @@ struct pcf50633_platform_data {
 	void (*force_shutdown)(struct pcf50633 *);
 
 	u8 resumers[5];
-};
 
-struct pcf50633_subdev_pdata {
-	struct pcf50633 *pcf;
+	struct pcf50633_bl_platform_data *backlight_data;
 };
 
 struct pcf50633_irq {
@@ -136,6 +135,7 @@ struct pcf50633 {
 	int irq;
 	struct pcf50633_irq irq_handler[PCF50633_NUM_IRQ];
 	struct work_struct irq_work;
+	struct workqueue_struct *work_queue;
 	struct mutex lock;
 
 	u8 mask_regs[5];
@@ -150,6 +150,7 @@ struct pcf50633 {
 	struct platform_device *mbc_pdev;
 	struct platform_device *adc_pdev;
 	struct platform_device *input_pdev;
+	struct platform_device *bl_pdev;
 	struct platform_device *regulator_pdev[PCF50633_NUM_REGULATORS];
 };
 
@@ -216,5 +217,9 @@ enum pcf50633_reg_int5 {
 #define PCF50633_REG_LEDCTL 0x2a
 #define PCF50633_REG_LEDDIM 0x2b
 
-#endif
+static inline struct pcf50633 *dev_to_pcf50633(struct device *dev)
+{
+	return dev_get_drvdata(dev);
+}
 
+#endif
diff --git a/include/linux/mfd/pcf50633/mbc.h b/include/linux/mfd/pcf50633/mbc.h
index 4119579acf2..df4f5fa88de 100644
--- a/include/linux/mfd/pcf50633/mbc.h
+++ b/include/linux/mfd/pcf50633/mbc.h
@@ -128,6 +128,7 @@ enum pcf50633_reg_mbcs3 {
 int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma);
 
 int pcf50633_mbc_get_status(struct pcf50633 *);
+int pcf50633_mbc_get_usb_online_status(struct pcf50633 *);
 
 #endif
 
diff --git a/include/linux/mm.h b/include/linux/mm.h
index d006e93d5c9..9a72cc78e6b 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -34,8 +34,6 @@ extern int sysctl_legacy_va_layout;
 #define sysctl_legacy_va_layout 0
 #endif
 
-extern unsigned long mmap_min_addr;
-
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -575,19 +573,6 @@ static inline void set_page_links(struct page *page, enum zone_type zone,
 }
 
 /*
- * If a hint addr is less than mmap_min_addr change hint to be as
- * low as possible but still greater than mmap_min_addr
- */
-static inline unsigned long round_hint_to_min(unsigned long hint)
-{
-	hint &= PAGE_MASK;
-	if (((void *)hint != NULL) &&
-	    (hint < mmap_min_addr))
-		return PAGE_ALIGN(mmap_min_addr);
-	return hint;
-}
-
-/*
  * Some inline functions in vmstat.h depend on page_zone()
  */
 #include <linux/vmstat.h>
@@ -826,7 +811,7 @@ extern int make_pages_present(unsigned long addr, unsigned long end);
 extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write);
 
 int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-			unsigned long start, int len, int write, int force,
+			unsigned long start, int nr_pages, int write, int force,
 			struct page **pages, struct vm_area_struct **vmas);
 int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 			struct page **pages);
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 7acc8439d9b..0042090a4d7 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -240,8 +240,6 @@ struct mm_struct {
 
 	unsigned long saved_auxv[AT_VECTOR_SIZE]; /* for /proc/PID/auxv */
 
-	s8 oom_adj;	/* OOM kill score adjustment (bit shift) */
-
 	cpumask_t cpu_vm_mask;
 
 	/* Architecture-specific MM context */
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index 39751c8cde9..944260c7d03 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -36,4 +36,9 @@
 #define SDIO_DEVICE_ID_SIANO_NOVA_A0		0x1100
 #define SDIO_DEVICE_ID_SIANO_STELLAR 		0x5347
 
+#define SDIO_DEVICE_ID_MARVELL_88W8688		0x9104
+#define SDIO_VENDOR_ID_ATHEROS			0x0271
+#define SDIO_DEVICE_ID_ATHEROS_AR6001		0x0100
+#define SDIO_DEVICE_ID_ATHEROS_AR6002		0x0200
+
 #endif
diff --git a/include/linux/mnt_namespace.h b/include/linux/mnt_namespace.h
index 3beb2592b03..d74785c2393 100644
--- a/include/linux/mnt_namespace.h
+++ b/include/linux/mnt_namespace.h
@@ -2,10 +2,9 @@
 #define _NAMESPACE_H_
 #ifdef __KERNEL__
 
-#include <linux/mount.h>
-#include <linux/sched.h>
-#include <linux/nsproxy.h>
+#include <linux/path.h>
 #include <linux/seq_file.h>
+#include <linux/wait.h>
 
 struct mnt_namespace {
 	atomic_t		count;
@@ -28,14 +27,6 @@ extern struct mnt_namespace *create_mnt_ns(struct vfsmount *mnt);
 extern struct mnt_namespace *copy_mnt_ns(unsigned long, struct mnt_namespace *,
 		struct fs_struct *);
 extern void put_mnt_ns(struct mnt_namespace *ns);
-
-static inline void exit_mnt_ns(struct task_struct *p)
-{
-	struct mnt_namespace *ns = p->nsproxy->mnt_ns;
-	if (ns)
-		put_mnt_ns(ns);
-}
-
 static inline void get_mnt_ns(struct mnt_namespace *ns)
 {
 	atomic_inc(&ns->count);
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 5675b63a063..0f32a9b6ff5 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -251,7 +251,7 @@ struct mtd_info {
 
 static inline struct mtd_info *dev_to_mtd(struct device *dev)
 {
-	return dev ? container_of(dev, struct mtd_info, dev) : NULL;
+	return dev ? dev_get_drvdata(dev) : NULL;
 }
 
 static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index af6dcb992bc..b70313d33ff 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -47,6 +47,8 @@ struct mtd_partition {
 #define MTDPART_SIZ_FULL	(0)
 
 
+struct mtd_info;
+
 int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
 int del_mtd_partitions(struct mtd_info *);
 
diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h
index 3430c775194..7ae05338e94 100644
--- a/include/linux/netfilter/xt_conntrack.h
+++ b/include/linux/netfilter/xt_conntrack.h
@@ -81,4 +81,17 @@ struct xt_conntrack_mtinfo1 {
 	__u8 state_mask, status_mask;
 };
 
+struct xt_conntrack_mtinfo2 {
+	union nf_inet_addr origsrc_addr, origsrc_mask;
+	union nf_inet_addr origdst_addr, origdst_mask;
+	union nf_inet_addr replsrc_addr, replsrc_mask;
+	union nf_inet_addr repldst_addr, repldst_mask;
+	__u32 expires_min, expires_max;
+	__u16 l4proto;
+	__be16 origsrc_port, origdst_port;
+	__be16 replsrc_port, repldst_port;
+	__u16 match_flags, invert_flags;
+	__u16 state_mask, status_mask;
+};
+
 #endif /*_XT_CONNTRACK_H*/
diff --git a/include/linux/netfilter/xt_osf.h b/include/linux/netfilter/xt_osf.h
index fd2272e0959..18afa495f97 100644
--- a/include/linux/netfilter/xt_osf.h
+++ b/include/linux/netfilter/xt_osf.h
@@ -20,6 +20,8 @@
 #ifndef _XT_OSF_H
 #define _XT_OSF_H
 
+#include <linux/types.h>
+
 #define MAXGENRELEN		32
 
 #define XT_OSF_GENRE		(1<<0)
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index fdffb413b19..f6b90240dd4 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -473,7 +473,6 @@ extern int  nfs_writepages(struct address_space *, struct writeback_control *);
 extern int  nfs_flush_incompatible(struct file *file, struct page *page);
 extern int  nfs_updatepage(struct file *, struct page *, unsigned int, unsigned int);
 extern int nfs_writeback_done(struct rpc_task *, struct nfs_write_data *);
-extern void nfs_writedata_release(void *);
 
 /*
  * Try to write back everything synchronously (but check the
@@ -488,7 +487,6 @@ extern int nfs_wb_page_cancel(struct inode *inode, struct page* page);
 extern int  nfs_commit_inode(struct inode *, int);
 extern struct nfs_write_data *nfs_commitdata_alloc(void);
 extern void nfs_commit_free(struct nfs_write_data *wdata);
-extern void nfs_commitdata_release(void *wdata);
 #else
 static inline int
 nfs_commit_inode(struct inode *inode, int how)
@@ -507,6 +505,7 @@ nfs_have_writebacks(struct inode *inode)
  * Allocate nfs_write_data structures
  */
 extern struct nfs_write_data *nfs_writedata_alloc(unsigned int npages);
+extern void nfs_writedata_free(struct nfs_write_data *);
 
 /*
  * linux/fs/nfs/read.c
@@ -515,7 +514,6 @@ extern int  nfs_readpage(struct file *, struct page *);
 extern int  nfs_readpages(struct file *, struct address_space *,
 		struct list_head *, unsigned);
 extern int  nfs_readpage_result(struct rpc_task *, struct nfs_read_data *);
-extern void nfs_readdata_release(void *data);
 extern int  nfs_readpage_async(struct nfs_open_context *, struct inode *,
 			       struct page *);
 
@@ -523,6 +521,7 @@ extern int  nfs_readpage_async(struct nfs_open_context *, struct inode *,
  * Allocate nfs_read_data structures
  */
 extern struct nfs_read_data *nfs_readdata_alloc(unsigned int npages);
+extern void nfs_readdata_free(struct nfs_read_data *);
 
 /*
  * linux/fs/nfs3proc.c
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index 829b94b156f..b359c4a9ec9 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -82,6 +82,12 @@
  *    to generate slightly worse code.  So use a simple one-line #define
  *    for node_isset(), instead of wrapping an inline inside a macro, the
  *    way we do the other calls.
+ *
+ * NODEMASK_SCRATCH
+ * When doing above logical AND, OR, XOR, Remap operations the callers tend to
+ * need temporary nodemask_t's on the stack. But if NODES_SHIFT is large,
+ * nodemask_t's consume too much stack space.  NODEMASK_SCRATCH is a helper
+ * for such situations. See below and CPUMASK_ALLOC also.
  */
 
 #include <linux/kernel.h>
@@ -473,4 +479,26 @@ static inline int num_node_state(enum node_states state)
 #define for_each_node(node)	   for_each_node_state(node, N_POSSIBLE)
 #define for_each_online_node(node) for_each_node_state(node, N_ONLINE)
 
+/*
+ * For nodemask scrach area.(See CPUMASK_ALLOC() in cpumask.h)
+ */
+
+#if NODES_SHIFT > 8 /* nodemask_t > 64 bytes */
+#define NODEMASK_ALLOC(x, m) struct x *m = kmalloc(sizeof(*m), GFP_KERNEL)
+#define NODEMASK_FREE(m) kfree(m)
+#else
+#define NODEMASK_ALLOC(x, m) struct x _m, *m = &_m
+#define NODEMASK_FREE(m)
+#endif
+
+/* A example struture for using NODEMASK_ALLOC, used in mempolicy. */
+struct nodemask_scratch {
+	nodemask_t	mask1;
+	nodemask_t	mask2;
+};
+
+#define NODEMASK_SCRATCH(x) NODEMASK_ALLOC(nodemask_scratch, x)
+#define NODEMASK_SCRATCH_FREE(x)  NODEMASK_FREE(x)
+
+
 #endif /* __LINUX_NODEMASK_H */
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
index c9663c69030..53b94e025c7 100644
--- a/include/linux/of_mdio.h
+++ b/include/linux/of_mdio.h
@@ -18,5 +18,8 @@ extern struct phy_device *of_phy_connect(struct net_device *dev,
 					 struct device_node *phy_np,
 					 void (*hndlr)(struct net_device *),
 					 u32 flags, phy_interface_t iface);
+extern struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
+					 void (*hndlr)(struct net_device *),
+					 phy_interface_t iface);
 
 #endif /* __LINUX_OF_MDIO_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index d304ddf412d..115fb7ba508 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1145,7 +1145,7 @@ static inline void pci_set_drvdata(struct pci_dev *pdev, void *data)
 /* If you want to know what to call your pci_dev, ask this function.
  * Again, it's a wrapper around the generic device.
  */
-static inline const char *pci_name(struct pci_dev *pdev)
+static inline const char *pci_name(const struct pci_dev *pdev)
 {
 	return dev_name(&pdev->dev);
 }
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index a3b00036579..73b46b6b904 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2645,6 +2645,7 @@
 #define PCI_DEVICE_ID_NETMOS_9835	0x9835
 #define PCI_DEVICE_ID_NETMOS_9845	0x9845
 #define PCI_DEVICE_ID_NETMOS_9855	0x9855
+#define PCI_DEVICE_ID_NETMOS_9901	0x9901
 
 #define PCI_VENDOR_ID_3COM_2		0xa727
 
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
index 8f921d74f49..68438e18fff 100644
--- a/include/linux/percpu-defs.h
+++ b/include/linux/percpu-defs.h
@@ -24,7 +24,8 @@
 
 #define DEFINE_PER_CPU_SECTION(type, name, section)			\
 	__attribute__((__section__(PER_CPU_BASE_SECTION section)))	\
-	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+	PER_CPU_ATTRIBUTES PER_CPU_DEF_ATTRIBUTES			\
+	__typeof__(type) per_cpu__##name
 
 /*
  * Variant on the per-CPU variable declaration/definition theme used for
diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h
index 89698d8aba5..b53f7006cc4 100644
--- a/include/linux/perf_counter.h
+++ b/include/linux/perf_counter.h
@@ -115,26 +115,44 @@ enum perf_counter_sample_format {
 	PERF_SAMPLE_TID				= 1U << 1,
 	PERF_SAMPLE_TIME			= 1U << 2,
 	PERF_SAMPLE_ADDR			= 1U << 3,
-	PERF_SAMPLE_GROUP			= 1U << 4,
+	PERF_SAMPLE_READ			= 1U << 4,
 	PERF_SAMPLE_CALLCHAIN			= 1U << 5,
 	PERF_SAMPLE_ID				= 1U << 6,
 	PERF_SAMPLE_CPU				= 1U << 7,
 	PERF_SAMPLE_PERIOD			= 1U << 8,
+	PERF_SAMPLE_STREAM_ID			= 1U << 9,
+	PERF_SAMPLE_RAW				= 1U << 10,
 
-	PERF_SAMPLE_MAX = 1U << 9,		/* non-ABI */
+	PERF_SAMPLE_MAX = 1U << 11,		/* non-ABI */
 };
 
 /*
- * Bits that can be set in attr.read_format to request that
- * reads on the counter should return the indicated quantities,
- * in increasing order of bit value, after the counter value.
+ * The format of the data returned by read() on a perf counter fd,
+ * as specified by attr.read_format:
+ *
+ * struct read_format {
+ * 	{ u64		value;
+ * 	  { u64		time_enabled; } && PERF_FORMAT_ENABLED
+ * 	  { u64		time_running; } && PERF_FORMAT_RUNNING
+ * 	  { u64		id;           } && PERF_FORMAT_ID
+ * 	} && !PERF_FORMAT_GROUP
+ *
+ * 	{ u64		nr;
+ * 	  { u64		time_enabled; } && PERF_FORMAT_ENABLED
+ * 	  { u64		time_running; } && PERF_FORMAT_RUNNING
+ * 	  { u64		value;
+ * 	    { u64	id;           } && PERF_FORMAT_ID
+ * 	  }		cntr[nr];
+ * 	} && PERF_FORMAT_GROUP
+ * };
  */
 enum perf_counter_read_format {
 	PERF_FORMAT_TOTAL_TIME_ENABLED		= 1U << 0,
 	PERF_FORMAT_TOTAL_TIME_RUNNING		= 1U << 1,
 	PERF_FORMAT_ID				= 1U << 2,
+	PERF_FORMAT_GROUP			= 1U << 3,
 
-	PERF_FORMAT_MAX = 1U << 3, 		/* non-ABI */
+	PERF_FORMAT_MAX = 1U << 4, 		/* non-ABI */
 };
 
 #define PERF_ATTR_SIZE_VER0	64	/* sizeof first published struct */
@@ -178,8 +196,11 @@ struct perf_counter_attr {
 				mmap           :  1, /* include mmap data     */
 				comm	       :  1, /* include comm data     */
 				freq           :  1, /* use freq, not period  */
+				inherit_stat   :  1, /* per task counts       */
+				enable_on_exec :  1, /* next exec enables     */
+				task           :  1, /* trace fork/exit       */
 
-				__reserved_1   : 53;
+				__reserved_1   : 50;
 
 	__u32			wakeup_events;	/* wakeup every n events */
 	__u32			__reserved_2;
@@ -232,6 +253,14 @@ struct perf_counter_mmap_page {
 	__u32	lock;			/* seqlock for synchronization */
 	__u32	index;			/* hardware counter identifier */
 	__s64	offset;			/* add to hardware counter value */
+	__u64	time_enabled;		/* time counter active */
+	__u64	time_running;		/* time counter on cpu */
+
+		/*
+		 * Hole for extension of the self monitor capabilities
+		 */
+
+	__u64	__reserved[123];	/* align to 1k */
 
 	/*
 	 * Control data for the mmap() data buffer.
@@ -253,7 +282,6 @@ struct perf_counter_mmap_page {
 #define PERF_EVENT_MISC_KERNEL			(1 << 0)
 #define PERF_EVENT_MISC_USER			(2 << 0)
 #define PERF_EVENT_MISC_HYPERVISOR		(3 << 0)
-#define PERF_EVENT_MISC_OVERFLOW		(1 << 2)
 
 struct perf_event_header {
 	__u32	type;
@@ -301,18 +329,18 @@ enum perf_event_type {
 	/*
 	 * struct {
 	 *	struct perf_event_header	header;
-	 *	u64				time;
-	 *	u64				id;
-	 *	u64				sample_period;
+	 *	u32				pid, ppid;
+	 *	u32				tid, ptid;
 	 * };
 	 */
-	PERF_EVENT_PERIOD		= 4,
+	PERF_EVENT_EXIT			= 4,
 
 	/*
 	 * struct {
 	 *	struct perf_event_header	header;
 	 *	u64				time;
 	 *	u64				id;
+	 *	u64				stream_id;
 	 * };
 	 */
 	PERF_EVENT_THROTTLE		= 5,
@@ -322,14 +350,22 @@ enum perf_event_type {
 	 * struct {
 	 *	struct perf_event_header	header;
 	 *	u32				pid, ppid;
+	 *	u32				tid, ptid;
 	 * };
 	 */
 	PERF_EVENT_FORK			= 7,
 
 	/*
-	 * When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field
-	 * will be PERF_SAMPLE_*
+	 * struct {
+	 * 	struct perf_event_header	header;
+	 * 	u32				pid, tid;
 	 *
+	 * 	struct read_format		values;
+	 * };
+	 */
+	PERF_EVENT_READ			= 8,
+
+	/*
 	 * struct {
 	 *	struct perf_event_header	header;
 	 *
@@ -337,16 +373,34 @@ enum perf_event_type {
 	 *	{ u32			pid, tid; } && PERF_SAMPLE_TID
 	 *	{ u64			time;     } && PERF_SAMPLE_TIME
 	 *	{ u64			addr;     } && PERF_SAMPLE_ADDR
-	 *	{ u64			config;   } && PERF_SAMPLE_CONFIG
+	 *	{ u64			id;	  } && PERF_SAMPLE_ID
+	 *	{ u64			stream_id;} && PERF_SAMPLE_STREAM_ID
 	 *	{ u32			cpu, res; } && PERF_SAMPLE_CPU
+	 * 	{ u64			period;   } && PERF_SAMPLE_PERIOD
 	 *
-	 *	{ u64			nr;
-	 *	  { u64 id, val; }	cnt[nr];  } && PERF_SAMPLE_GROUP
+	 *	{ struct read_format	values;	  } && PERF_SAMPLE_READ
 	 *
 	 *	{ u64			nr,
 	 *	  u64			ips[nr];  } && PERF_SAMPLE_CALLCHAIN
+	 *
+	 * 	#
+	 * 	# The RAW record below is opaque data wrt the ABI
+	 * 	#
+	 * 	# That is, the ABI doesn't make any promises wrt to
+	 * 	# the stability of its content, it may vary depending
+	 * 	# on event, hardware, kernel version and phase of
+	 * 	# the moon.
+	 * 	#
+	 * 	# In other words, PERF_SAMPLE_RAW contents are not an ABI.
+	 * 	#
+	 *
+	 *	{ u32			size;
+	 *	  char                  data[size];}&& PERF_SAMPLE_RAW
 	 * };
 	 */
+	PERF_EVENT_SAMPLE		= 9,
+
+	PERF_EVENT_MAX,			/* non-ABI */
 };
 
 enum perf_callchain_context {
@@ -387,6 +441,11 @@ struct perf_callchain_entry {
 	__u64				ip[PERF_MAX_STACK_DEPTH];
 };
 
+struct perf_raw_record {
+	u32				size;
+	void				*data;
+};
+
 struct task_struct;
 
 /**
@@ -582,6 +641,7 @@ struct perf_counter_context {
 	int				nr_counters;
 	int				nr_active;
 	int				is_active;
+	int				nr_stat;
 	atomic_t			refcount;
 	struct task_struct		*task;
 
@@ -654,10 +714,13 @@ struct perf_sample_data {
 	struct pt_regs			*regs;
 	u64				addr;
 	u64				period;
+	struct perf_raw_record		*raw;
 };
 
 extern int perf_counter_overflow(struct perf_counter *counter, int nmi,
 				 struct perf_sample_data *data);
+extern void perf_counter_output(struct perf_counter *counter, int nmi,
+				struct perf_sample_data *data);
 
 /*
  * Return 1 for a software counter, 0 for a hardware counter
@@ -669,7 +732,16 @@ static inline int is_software_counter(struct perf_counter *counter)
 		(counter->attr.type != PERF_TYPE_HW_CACHE);
 }
 
-extern void perf_swcounter_event(u32, u64, int, struct pt_regs *, u64);
+extern atomic_t perf_swcounter_enabled[PERF_COUNT_SW_MAX];
+
+extern void __perf_swcounter_event(u32, u64, int, struct pt_regs *, u64);
+
+static inline void
+perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
+{
+	if (atomic_read(&perf_swcounter_enabled[event]))
+		__perf_swcounter_event(event, nr, nmi, regs, addr);
+}
 
 extern void __perf_counter_mmap(struct vm_area_struct *vma);
 
diff --git a/include/linux/personality.h b/include/linux/personality.h
index a84e9ff9b27..126120819a0 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -40,7 +40,10 @@ enum {
  * Security-relevant compatibility flags that must be
  * cleared upon setuid or setgid exec:
  */
-#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE)
+#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC  | \
+			    ADDR_NO_RANDOMIZE  | \
+			    ADDR_COMPAT_LAYOUT | \
+			    MMAP_PAGE_ZERO)
 
 /*
  * Personality types.
diff --git a/include/linux/pps.h b/include/linux/pps.h
index cfe5c7214ec..0194ab06177 100644
--- a/include/linux/pps.h
+++ b/include/linux/pps.h
@@ -22,6 +22,8 @@
 #ifndef _PPS_H_
 #define _PPS_H_
 
+#include <linux/types.h>
+
 #define PPS_VERSION		"5.3.6"
 #define PPS_MAX_SOURCES		16		/* should be enough... */
 
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 7bc45759368..26361c4c037 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -7,7 +7,6 @@
 #ifndef _LINUX_QUOTAOPS_
 #define _LINUX_QUOTAOPS_
 
-#include <linux/smp_lock.h>
 #include <linux/fs.h>
 
 static inline struct quota_info *sb_dqopt(struct super_block *sb)
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index e73e2429a1b..278777fa8a3 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -99,7 +99,6 @@ enum rfkill_user_states {
 #undef RFKILL_STATE_UNBLOCKED
 #undef RFKILL_STATE_HARD_BLOCKED
 
-#include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/mutex.h>
@@ -225,7 +224,7 @@ void rfkill_destroy(struct rfkill *rfkill);
  * should be blocked) so that drivers need not keep track of the soft
  * block state -- which they might not be able to.
  */
-bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
+bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
 
 /**
  * rfkill_set_sw_state - Set the internal rfkill software block state
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index e5996984ddd..9aaf5bfdad1 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -242,6 +242,8 @@ size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents,
  */
 
 #define SG_MITER_ATOMIC		(1 << 0)	 /* use kmap_atomic */
+#define SG_MITER_TO_SG		(1 << 1)	/* flush back to phys on unmap */
+#define SG_MITER_FROM_SG	(1 << 2)	/* nop */
 
 struct sg_mapping_iter {
 	/* the following three fields can be accessed directly */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4d075426988..0f1ea4a6695 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -209,7 +209,7 @@ extern unsigned long long time_sync_thresh;
 			((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0)
 #define task_contributes_to_load(task)	\
 				((task->state & TASK_UNINTERRUPTIBLE) != 0 && \
-				 (task->flags & PF_FROZEN) == 0)
+				 (task->flags & PF_FREEZING) == 0)
 
 #define __set_task_state(tsk, state_value)		\
 	do { (tsk)->state = (state_value); } while (0)
@@ -349,8 +349,20 @@ extern int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner);
 struct nsproxy;
 struct user_namespace;
 
-/* Maximum number of active map areas.. This is a random (large) number */
-#define DEFAULT_MAX_MAP_COUNT	65536
+/*
+ * Default maximum number of active map areas, this limits the number of vmas
+ * per mm struct. Users can overwrite this number by sysctl but there is a
+ * problem.
+ *
+ * When a program's coredump is generated as ELF format, a section is created
+ * per a vma. In ELF, the number of sections is represented in unsigned short.
+ * This means the number of sections should be smaller than 65535 at coredump.
+ * Because the kernel adds some informative sections to a image of program at
+ * generating coredump, we need some margin. The number of extra sections is
+ * 1-3 now and depends on arch. We use "5" as safe margin, here.
+ */
+#define MAPCOUNT_ELF_CORE_MARGIN	(5)
+#define DEFAULT_MAX_MAP_COUNT	(USHORT_MAX - MAPCOUNT_ELF_CORE_MARGIN)
 
 extern int sysctl_max_map_count;
 
@@ -486,6 +498,15 @@ struct task_cputime {
 		.sum_exec_runtime = 0,				\
 	}
 
+/*
+ * Disable preemption until the scheduler is running.
+ * Reset by start_kernel()->sched_init()->init_idle().
+ *
+ * We include PREEMPT_ACTIVE to avoid cond_resched() from working
+ * before the scheduler is active -- see should_resched().
+ */
+#define INIT_PREEMPT_COUNT	(1 + PREEMPT_ACTIVE)
+
 /**
  * struct thread_group_cputimer - thread group interval timer counts
  * @cputime:		thread group interval timers.
@@ -1177,6 +1198,7 @@ struct task_struct {
 	 * a short time
 	 */
 	unsigned char fpu_counter;
+	s8 oomkilladj; /* OOM kill score adjustment (bit shift). */
 #ifdef CONFIG_BLK_DEV_IO_TRACE
 	unsigned int btrace_seq;
 #endif
@@ -1659,6 +1681,7 @@ extern cputime_t task_gtime(struct task_struct *p);
 #define PF_MEMALLOC	0x00000800	/* Allocating memory */
 #define PF_FLUSHER	0x00001000	/* responsible for disk writeback */
 #define PF_USED_MATH	0x00002000	/* if unset the fpu must be initialized before use */
+#define PF_FREEZING	0x00004000	/* freeze in progress. do not account to load */
 #define PF_NOFREEZE	0x00008000	/* this thread should not be frozen */
 #define PF_FROZEN	0x00010000	/* frozen for system suspend */
 #define PF_FSTRANS	0x00020000	/* inside a filesystem transaction */
diff --git a/include/linux/security.h b/include/linux/security.h
index 5eff459b383..1f16eea2017 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -28,6 +28,7 @@
 #include <linux/resource.h>
 #include <linux/sem.h>
 #include <linux/shm.h>
+#include <linux/mm.h> /* PAGE_ALIGN */
 #include <linux/msg.h>
 #include <linux/sched.h>
 #include <linux/key.h>
@@ -66,6 +67,9 @@ extern int cap_inode_setxattr(struct dentry *dentry, const char *name,
 extern int cap_inode_removexattr(struct dentry *dentry, const char *name);
 extern int cap_inode_need_killpriv(struct dentry *dentry);
 extern int cap_inode_killpriv(struct dentry *dentry);
+extern int cap_file_mmap(struct file *file, unsigned long reqprot,
+			 unsigned long prot, unsigned long flags,
+			 unsigned long addr, unsigned long addr_only);
 extern int cap_task_fix_setuid(struct cred *new, const struct cred *old, int flags);
 extern int cap_task_prctl(int option, unsigned long arg2, unsigned long arg3,
 			  unsigned long arg4, unsigned long arg5);
@@ -92,6 +96,7 @@ extern int cap_netlink_send(struct sock *sk, struct sk_buff *skb);
 extern int cap_netlink_recv(struct sk_buff *skb, int cap);
 
 extern unsigned long mmap_min_addr;
+extern unsigned long dac_mmap_min_addr;
 /*
  * Values used in the task_security_ops calls
  */
@@ -116,6 +121,21 @@ struct request_sock;
 #define LSM_UNSAFE_PTRACE	2
 #define LSM_UNSAFE_PTRACE_CAP	4
 
+/*
+ * If a hint addr is less than mmap_min_addr change hint to be as
+ * low as possible but still greater than mmap_min_addr
+ */
+static inline unsigned long round_hint_to_min(unsigned long hint)
+{
+	hint &= PAGE_MASK;
+	if (((void *)hint != NULL) &&
+	    (hint < mmap_min_addr))
+		return PAGE_ALIGN(mmap_min_addr);
+	return hint;
+}
+extern int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp,
+				 void __user *buffer, size_t *lenp, loff_t *ppos);
+
 #ifdef CONFIG_SECURITY
 
 struct security_mnt_opts {
@@ -2197,9 +2217,7 @@ static inline int security_file_mmap(struct file *file, unsigned long reqprot,
 				     unsigned long addr,
 				     unsigned long addr_only)
 {
-	if ((addr < mmap_min_addr) && !capable(CAP_SYS_RAWIO))
-		return -EACCES;
-	return 0;
+	return cap_file_mmap(file, reqprot, prot, flags, addr, addr_only);
 }
 
 static inline int security_file_mprotect(struct vm_area_struct *vma,
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index b47b3f039d1..f2c69a2cca1 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1342,12 +1342,12 @@ static inline int skb_network_offset(const struct sk_buff *skb)
  * shifting the start of the packet by 2 bytes. Drivers should do this
  * with:
  *
- * skb_reserve(NET_IP_ALIGN);
+ * skb_reserve(skb, NET_IP_ALIGN);
  *
  * The downside to this alignment of the IP header is that the DMA is now
  * unaligned. On some architectures the cost of an unaligned DMA is high
  * and this cost outweighs the gains made by aligning the IP header.
- * 
+ *
  * Since this trade off varies between architectures, we allow NET_IP_ALIGN
  * to be overridden.
  */
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index 4dcbc2c7149..c1c862b1d01 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -11,6 +11,7 @@
 #include <linux/workqueue.h>
 #include <linux/kobject.h>
 #include <linux/kmemtrace.h>
+#include <linux/kmemleak.h>
 
 enum stat_item {
 	ALLOC_FASTPATH,		/* Allocation from cpu slab */
@@ -233,6 +234,7 @@ static __always_inline void *kmalloc_large(size_t size, gfp_t flags)
 	unsigned int order = get_order(size);
 	void *ret = (void *) __get_free_pages(flags | __GFP_COMP, order);
 
+	kmemleak_alloc(ret, size, 1, flags);
 	trace_kmalloc(_THIS_IP_, ret, size, PAGE_SIZE << order, flags);
 
 	return ret;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 9c4cd27f468..c47c4b4da97 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -80,6 +80,8 @@ struct spi_device {
 #define	SPI_LSB_FIRST	0x08			/* per-word bits-on-wire */
 #define	SPI_3WIRE	0x10			/* SI/SO signals shared */
 #define	SPI_LOOP	0x20			/* loopback mode */
+#define	SPI_NO_CS	0x40			/* 1 dev/bus, no chipselect */
+#define	SPI_READY	0x80			/* slave pulls low to pause */
 	u8			bits_per_word;
 	int			irq;
 	void			*controller_state;
@@ -248,6 +250,10 @@ struct spi_master {
 	/* spi_device.mode flags understood by this controller driver */
 	u16			mode_bits;
 
+	/* other constraints relevant to this driver */
+	u16			flags;
+#define SPI_MASTER_HALF_DUPLEX	BIT(0)		/* can't do full duplex */
+
 	/* Setup mode and clock, etc (spi driver may call many times).
 	 *
 	 * IMPORTANT:  this may be called when transfers to another
diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h
index 95251ccd5a0..bf0570a84f7 100644
--- a/include/linux/spi/spidev.h
+++ b/include/linux/spi/spidev.h
@@ -40,6 +40,8 @@
 #define SPI_LSB_FIRST		0x08
 #define SPI_3WIRE		0x10
 #define SPI_LOOP		0x20
+#define SPI_NO_CS		0x40
+#define SPI_READY		0x80
 
 /*---------------------------------------------------------------------------*/
 
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 252b245cfcf..4be57ab0347 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -132,6 +132,11 @@ do {								\
 #endif /*__raw_spin_is_contended*/
 #endif
 
+/* The lock does not imply full memory barrier. */
+#ifndef ARCH_HAS_SMP_MB_AFTER_LOCK
+static inline void smp_mb__after_lock(void) { smp_mb(); }
+#endif
+
 /**
  * spin_unlock_wait - wait until the spinlock gets unlocked
  * @lock: the spinlock in question.
diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h
index d8910b68e1b..b99c625fddf 100644
--- a/include/linux/sunrpc/xdr.h
+++ b/include/linux/sunrpc/xdr.h
@@ -12,7 +12,6 @@
 #include <linux/uio.h>
 #include <asm/byteorder.h>
 #include <linux/scatterlist.h>
-#include <linux/smp_lock.h>
 
 /*
  * Buffer adjustment
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index fa4242cdade..80de7003d8c 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -321,6 +321,8 @@ asmlinkage long sys_rt_sigtimedwait(const sigset_t __user *uthese,
 				siginfo_t __user *uinfo,
 				const struct timespec __user *uts,
 				size_t sigsetsize);
+asmlinkage long sys_rt_tgsigqueueinfo(pid_t tgid, pid_t  pid, int sig,
+		siginfo_t __user *uinfo);
 asmlinkage long sys_kill(int pid, int sig);
 asmlinkage long sys_tgkill(int tgid, int pid, int sig);
 asmlinkage long sys_tkill(int pid, int sig);
diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
index 98a1d8cfb73..99adcdc0d3c 100644
--- a/include/linux/sysrq.h
+++ b/include/linux/sysrq.h
@@ -14,6 +14,8 @@
 #ifndef _LINUX_SYSRQ_H
 #define _LINUX_SYSRQ_H
 
+#include <linux/errno.h>
+
 struct pt_regs;
 struct tty_struct;
 
diff --git a/include/linux/timer.h b/include/linux/timer.h
index ccf882eed8f..be62ec2ebea 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -190,6 +190,8 @@ extern unsigned long get_next_timer_interrupt(unsigned long now);
  */
 #ifdef CONFIG_TIMER_STATS
 
+extern int timer_stats_active;
+
 #define TIMER_STATS_FLAG_DEFERRABLE	0x1
 
 extern void init_timer_stats(void);
@@ -203,6 +205,8 @@ extern void __timer_stats_timer_set_start_info(struct timer_list *timer,
 
 static inline void timer_stats_timer_set_start_info(struct timer_list *timer)
 {
+	if (likely(!timer_stats_active))
+		return;
 	__timer_stats_timer_set_start_info(timer, __builtin_return_address(0));
 }
 
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 1488d8c81aa..e8c6c9136c9 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -394,6 +394,7 @@ extern void __do_SAK(struct tty_struct *tty);
 extern void disassociate_ctty(int priv);
 extern void no_tty(void);
 extern void tty_flip_buffer_push(struct tty_struct *tty);
+extern void tty_flush_to_ldisc(struct tty_struct *tty);
 extern void tty_buffer_free_all(struct tty_struct *tty);
 extern void tty_buffer_flush(struct tty_struct *tty);
 extern void tty_buffer_init(struct tty_struct *tty);
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 40f38d89677..0c4ee9b88f8 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -144,7 +144,7 @@ struct tty_ldisc_ops {
 
 struct tty_ldisc {
 	struct tty_ldisc_ops *ops;
-	int refcount;
+	atomic_t users;
 };
 
 #define TTY_LDISC_MAGIC	0x5403
diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
index ed889f4168f..ae779bb8cc0 100644
--- a/include/linux/ucb1400.h
+++ b/include/linux/ucb1400.h
@@ -73,6 +73,10 @@
 
 #define UCB_ADC_DATA		0x68
 #define UCB_ADC_DAT_VALID	(1 << 15)
+
+#define UCB_FCSR		0x6c
+#define UCB_FCSR_AVE		(1 << 12)
+
 #define UCB_ADC_DAT_MASK	0x3ff
 
 #define UCB_ID			0x7e
diff --git a/include/linux/uio.h b/include/linux/uio.h
index b7fe13883bd..98c114323a8 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -19,15 +19,6 @@ struct iovec
 	__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
 };
 
-#ifdef __KERNEL__
-
-struct kvec {
-	void *iov_base; /* and that should *never* hold a userland pointer */
-	size_t iov_len;
-};
-
-#endif
-
 /*
  *	UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
  */
@@ -35,6 +26,13 @@ struct kvec {
 #define UIO_FASTIOV	8
 #define UIO_MAXIOV	1024
 
+#ifdef __KERNEL__
+
+struct kvec {
+	void *iov_base; /* and that should *never* hold a userland pointer */
+	size_t iov_len;
+};
+
 /*
  * Total number of bytes covered by an iovec.
  *
@@ -53,5 +51,6 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs)
 }
 
 unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
+#endif
 
 #endif
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 84929e91403..b1e3c2fbfe1 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -888,8 +888,6 @@ struct usb_driver {
  * struct usb_device_driver - identifies USB device driver to usbcore
  * @name: The driver name should be unique among USB drivers,
  *	and should normally be the same as the module name.
- * @nodename: Callback to provide a naming hint for a possible
- *	device node to create.
  * @probe: Called to see if the driver is willing to manage a particular
  *	device.  If it is, probe returns zero and uses dev_set_drvdata()
  *	to associate driver-specific data with the device.  If unwilling
@@ -924,6 +922,8 @@ extern struct bus_type usb_bus_type;
 /**
  * struct usb_class_driver - identifies a USB driver that wants to use the USB major number
  * @name: the usb class device name for this driver.  Will show up in sysfs.
+ * @nodename: Callback to provide a naming hint for a possible
+ *	device node to create.
  * @fops: pointer to the struct file_operations of this driver.
  * @minor_base: the start of the minor range for this driver.
  *
@@ -1046,6 +1046,8 @@ typedef void (*usb_complete_t)(struct urb *);
  *	the device driver is saying that it provided this DMA address,
  *	which the host controller driver should use in preference to the
  *	transfer_buffer.
+ * @sg: scatter gather buffer list
+ * @num_sgs: number of entries in the sg list
  * @transfer_buffer_length: How big is transfer_buffer.  The transfer may
  *	be broken up into chunks according to the current maximum packet
  *	size for the endpoint, which is a function of the configuration
diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h
deleted file mode 100644
index e115ae6df1d..00000000000
--- a/include/linux/usb/langwell_otg.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __LANGWELL_OTG_H__
-#define __LANGWELL_OTG_H__
-
-/* notify transceiver driver about OTG events */
-extern void langwell_update_transceiver(void);
-/* HCD register bus driver */
-extern int langwell_register_host(struct pci_driver *host_driver);
-/* HCD unregister bus driver */
-extern void langwell_unregister_host(struct pci_driver *host_driver);
-/* DCD register bus driver */
-extern int langwell_register_peripheral(struct pci_driver *client_driver);
-/* DCD unregister bus driver */
-extern void langwell_unregister_peripheral(struct pci_driver *client_driver);
-/* No silent failure, output warning message */
-extern void langwell_otg_nsf_msg(unsigned long message);
-
-#define CI_USBCMD		0x30
-#	define USBCMD_RST		BIT(1)
-#	define USBCMD_RS		BIT(0)
-#define CI_USBSTS		0x34
-#	define USBSTS_SLI		BIT(8)
-#	define USBSTS_URI		BIT(6)
-#	define USBSTS_PCI		BIT(2)
-#define CI_PORTSC1		0x74
-#	define PORTSC_PP		BIT(12)
-#	define PORTSC_LS		(BIT(11) | BIT(10))
-#	define PORTSC_SUSP		BIT(7)
-#	define PORTSC_CCS		BIT(0)
-#define CI_HOSTPC1		0xb4
-#	define HOSTPC1_PHCD		BIT(22)
-#define CI_OTGSC		0xf4
-#	define OTGSC_DPIE		BIT(30)
-#	define OTGSC_1MSE		BIT(29)
-#	define OTGSC_BSEIE		BIT(28)
-#	define OTGSC_BSVIE		BIT(27)
-#	define OTGSC_ASVIE		BIT(26)
-#	define OTGSC_AVVIE		BIT(25)
-#	define OTGSC_IDIE		BIT(24)
-#	define OTGSC_DPIS		BIT(22)
-#	define OTGSC_1MSS		BIT(21)
-#	define OTGSC_BSEIS		BIT(20)
-#	define OTGSC_BSVIS		BIT(19)
-#	define OTGSC_ASVIS		BIT(18)
-#	define OTGSC_AVVIS		BIT(17)
-#	define OTGSC_IDIS		BIT(16)
-#	define OTGSC_DPS		BIT(14)
-#	define OTGSC_1MST		BIT(13)
-#	define OTGSC_BSE		BIT(12)
-#	define OTGSC_BSV		BIT(11)
-#	define OTGSC_ASV		BIT(10)
-#	define OTGSC_AVV		BIT(9)
-#	define OTGSC_ID			BIT(8)
-#	define OTGSC_HABA		BIT(7)
-#	define OTGSC_HADP		BIT(6)
-#	define OTGSC_IDPU		BIT(5)
-#	define OTGSC_DP			BIT(4)
-#	define OTGSC_OT			BIT(3)
-#	define OTGSC_HAAR		BIT(2)
-#	define OTGSC_VC			BIT(1)
-#	define OTGSC_VD			BIT(0)
-#	define OTGSC_INTEN_MASK		(0x7f << 24)
-#	define OTGSC_INTSTS_MASK	(0x7f << 16)
-#define CI_USBMODE		0xf8
-#	define USBMODE_CM		(BIT(1) | BIT(0))
-#	define USBMODE_IDLE		0
-#	define USBMODE_DEVICE		0x2
-#	define USBMODE_HOST		0x3
-
-#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI)
-
-struct otg_hsm {
-	/* Input */
-	int a_bus_resume;
-	int a_bus_suspend;
-	int a_conn;
-	int a_sess_vld;
-	int a_srp_det;
-	int a_vbus_vld;
-	int b_bus_resume;
-	int b_bus_suspend;
-	int b_conn;
-	int b_se0_srp;
-	int b_sess_end;
-	int b_sess_vld;
-	int id;
-
-	/* Internal variables */
-	int a_set_b_hnp_en;
-	int b_srp_done;
-	int b_hnp_enable;
-
-	/* Timeout indicator for timers */
-	int a_wait_vrise_tmout;
-	int a_wait_bcon_tmout;
-	int a_aidl_bdis_tmout;
-	int b_ase0_brst_tmout;
-	int b_bus_suspend_tmout;
-	int b_srp_res_tmout;
-
-	/* Informative variables */
-	int a_bus_drop;
-	int a_bus_req;
-	int a_clr_err;
-	int a_suspend_req;
-	int b_bus_req;
-
-	/* Output */
-	int drv_vbus;
-	int loc_conn;
-	int loc_sof;
-
-	/* Others */
-	int b_bus_suspend_vld;
-};
-
-#define TA_WAIT_VRISE	100
-#define TA_WAIT_BCON	30000
-#define TA_AIDL_BDIS	15000
-#define TB_ASE0_BRST	5000
-#define TB_SE0_SRP	2
-#define TB_SRP_RES	100
-#define TB_BUS_SUSPEND	500
-
-struct langwell_otg_timer {
-	unsigned long expires;	/* Number of count increase to timeout */
-	unsigned long count;	/* Tick counter */
-	void (*function)(unsigned long);	/* Timeout function */
-	unsigned long data;	/* Data passed to function */
-	struct list_head list;
-};
-
-struct langwell_otg {
-	struct otg_transceiver 	otg;
-	struct otg_hsm 		hsm;
-	void __iomem 		*regs;
-	unsigned 		region;
-	struct pci_driver	*host_ops;
-	struct pci_driver	*client_ops;
-	struct pci_dev		*pdev;
-	struct work_struct 	work;
-	struct workqueue_struct	*qwork;
-	spinlock_t 		lock;
-	spinlock_t 		wq_lock;
-};
-
-static inline struct langwell_otg *otg_to_langwell(struct otg_transceiver *otg)
-{
-	return container_of(otg, struct langwell_otg, otg);
-}
-
-#ifdef DEBUG
-#define otg_dbg(fmt, args...) \
-	printk(KERN_DEBUG fmt , ## args)
-#else
-#define otg_dbg(fmt, args...) \
-	do { } while (0)
-#endif /* DEBUG */
-#endif /* __LANGWELL_OTG_H__ */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 44801d26a37..0ec50ba6213 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -317,7 +317,8 @@ extern int usb_serial_generic_register(int debug);
 extern void usb_serial_generic_deregister(void);
 extern void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
 						 gfp_t mem_flags);
-extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port,
+extern int usb_serial_handle_sysrq_char(struct tty_struct *tty,
+					struct usb_serial_port *port,
 					unsigned int ch);
 extern int usb_serial_handle_break(struct usb_serial_port *port);
 
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 5d44059f6d6..310e18a880f 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -42,7 +42,6 @@ struct usbnet {
 
 	/* protocol/interface state */
 	struct net_device	*net;
-	struct net_device_stats	stats;
 	int			msg_enable;
 	unsigned long		data [5];
 	u32			xid;
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 8a025d51090..74f16876f38 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -318,6 +318,8 @@ struct v4l2_pix_format {
 /* see http://www.siliconimaging.com/RGB%20Bayer.htm */
 #define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
 #define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG8  v4l2_fourcc('G', 'R', 'B', 'G') /*  8  GRGR.. BGBG.. */
+
 /*
  * 10bit raw bayer, expanded to 16 bits
  * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
@@ -336,6 +338,7 @@ struct v4l2_pix_format {
 /*  Vendor-specific formats   */
 #define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
 #define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
+#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
 #define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
 #define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
 #define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index be7d255fc7c..8dab9f2b883 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -20,8 +20,7 @@
 
 #define VIRTIO_BLK_ID_BYTES	(sizeof(__u16[256]))	/* IDENTIFY DATA */
 
-struct virtio_blk_config
-{
+struct virtio_blk_config {
 	/* The capacity (in 512-byte sectors). */
 	__u64 capacity;
 	/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
@@ -50,8 +49,7 @@ struct virtio_blk_config
 #define VIRTIO_BLK_T_BARRIER	0x80000000
 
 /* This is the first element of the read scatter-gather list. */
-struct virtio_blk_outhdr
-{
+struct virtio_blk_outhdr {
 	/* VIRTIO_BLK_T* */
 	__u32 type;
 	/* io priority. */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 99f514575f6..e547e3c8ee9 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -79,8 +79,7 @@
  *	the dev->feature bits if it wants.
  */
 typedef void vq_callback_t(struct virtqueue *);
-struct virtio_config_ops
-{
+struct virtio_config_ops {
 	void (*get)(struct virtio_device *vdev, unsigned offset,
 		    void *buf, unsigned len);
 	void (*set)(struct virtio_device *vdev, unsigned offset,
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index cec79adbe3e..d8dd539c9f4 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -27,11 +27,11 @@
 #define VIRTIO_NET_F_CTRL_VQ	17	/* Control channel available */
 #define VIRTIO_NET_F_CTRL_RX	18	/* Control channel RX mode support */
 #define VIRTIO_NET_F_CTRL_VLAN	19	/* Control channel VLAN filtering */
+#define VIRTIO_NET_F_CTRL_RX_EXTRA 20	/* Extra RX mode control support */
 
 #define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
 
-struct virtio_net_config
-{
+struct virtio_net_config {
 	/* The config defining mac address (if VIRTIO_NET_F_MAC) */
 	__u8 mac[6];
 	/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
@@ -40,8 +40,7 @@ struct virtio_net_config
 
 /* This is the first element of the scatter-gather list.  If you don't
  * specify GSO or CSUM features, you can simply ignore the header. */
-struct virtio_net_hdr
-{
+struct virtio_net_hdr {
 #define VIRTIO_NET_HDR_F_NEEDS_CSUM	1	// Use csum_start, csum_offset
 	__u8 flags;
 #define VIRTIO_NET_HDR_GSO_NONE		0	// Not a GSO frame
@@ -81,14 +80,19 @@ typedef __u8 virtio_net_ctrl_ack;
 #define VIRTIO_NET_ERR    1
 
 /*
- * Control the RX mode, ie. promisucous and allmulti.  PROMISC and
- * ALLMULTI commands require an "out" sg entry containing a 1 byte
- * state value, zero = disable, non-zero = enable.  These commands
- * are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Control the RX mode, ie. promisucous, allmulti, etc...
+ * All commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable.  Commands
+ * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
  */
 #define VIRTIO_NET_CTRL_RX    0
  #define VIRTIO_NET_CTRL_RX_PROMISC      0
  #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
+ #define VIRTIO_NET_CTRL_RX_ALLUNI       2
+ #define VIRTIO_NET_CTRL_RX_NOMULTI      3
+ #define VIRTIO_NET_CTRL_RX_NOUNI        4
+ #define VIRTIO_NET_CTRL_RX_NOBCAST      5
 
 /*
  * Control the MAC filter table.
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index 693e0ec5afa..e4d144b132b 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -30,8 +30,7 @@
 #define VIRTIO_RING_F_INDIRECT_DESC	28
 
 /* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
-struct vring_desc
-{
+struct vring_desc {
 	/* Address (guest-physical). */
 	__u64 addr;
 	/* Length. */
@@ -42,24 +41,21 @@ struct vring_desc
 	__u16 next;
 };
 
-struct vring_avail
-{
+struct vring_avail {
 	__u16 flags;
 	__u16 idx;
 	__u16 ring[];
 };
 
 /* u32 is used here for ids for padding reasons. */
-struct vring_used_elem
-{
+struct vring_used_elem {
 	/* Index of start of used descriptor chain. */
 	__u32 id;
 	/* Total length of the descriptor chain which was used (written to) */
 	__u32 len;
 };
 
-struct vring_used
-{
+struct vring_used {
 	__u16 flags;
 	__u16 idx;
 	struct vring_used_elem ring[];
diff --git a/include/linux/wait.h b/include/linux/wait.h
index 6788e1a4d4c..cf3c2f5dba5 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -77,7 +77,14 @@ struct task_struct;
 #define __WAIT_BIT_KEY_INITIALIZER(word, bit)				\
 	{ .flags = word, .bit_nr = bit, }
 
-extern void init_waitqueue_head(wait_queue_head_t *q);
+extern void __init_waitqueue_head(wait_queue_head_t *q, struct lock_class_key *);
+
+#define init_waitqueue_head(q)				\
+	do {						\
+		static struct lock_class_key __key;	\
+							\
+		__init_waitqueue_head((q), &__key);	\
+	} while (0)
 
 #ifdef CONFIG_LOCKDEP
 # define __WAIT_QUEUE_HEAD_INIT_ONSTACK(name) \
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 13e1adf55c4..6273fa97b52 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -240,6 +240,21 @@ static inline int cancel_delayed_work(struct delayed_work *work)
 	return ret;
 }
 
+/*
+ * Like above, but uses del_timer() instead of del_timer_sync(). This means,
+ * if it returns 0 the timer function may be running and the queueing is in
+ * progress.
+ */
+static inline int __cancel_delayed_work(struct delayed_work *work)
+{
+	int ret;
+
+	ret = del_timer(&work->timer);
+	if (ret)
+		work_clear_pending(&work->work);
+	return ret;
+}
+
 extern int cancel_delayed_work_sync(struct delayed_work *work);
 
 /* Obsolete. use cancel_delayed_work_sync() */
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 4d7e2272c42..94e908c0d7a 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -60,6 +60,10 @@ enum {
 	V4L2_IDENT_OV7670 = 250,
 	V4L2_IDENT_OV7720 = 251,
 	V4L2_IDENT_OV7725 = 252,
+	V4L2_IDENT_OV7660 = 253,
+	V4L2_IDENT_OV9650 = 254,
+	V4L2_IDENT_OV9655 = 255,
+	V4L2_IDENT_SOI968 = 256,
 
 	/* module saa7146: reserved range 300-309 */
 	V4L2_IDENT_SAA7146 = 300,
@@ -155,9 +159,15 @@ enum {
 	/* module cafe_ccic, just ident 8801 */
 	V4L2_IDENT_CAFE = 8801,
 
+	/* module mt9v011, just ident 8243 */
+	V4L2_IDENT_MT9V011 = 8243,
+
 	/* module tw9910: just ident 9910 */
 	V4L2_IDENT_TW9910 = 9910,
 
+	/* module sn9c20x: just ident 10000 */
+	V4L2_IDENT_SN9C20X = 10000,
+
 	/* module msp3400: reserved range 34000-34999 and 44000-44999 */
 	V4L2_IDENT_MSPX4XX  = 34000, /* generic MSPX4XX identifier, only
 					use internally (tveeprom.c). */
@@ -234,6 +244,11 @@ enum {
 	V4L2_IDENT_MT9V022IX7ATC	= 45010, /* No way to detect "normal" I77ATx */
 	V4L2_IDENT_MT9V022IX7ATM	= 45015, /* and "lead free" IA7ATx chips */
 	V4L2_IDENT_MT9T031		= 45020,
+	V4L2_IDENT_MT9V111		= 45031,
+	V4L2_IDENT_MT9V112		= 45032,
+
+	/* HV7131R CMOS sensor: just ident 46000 */
+	V4L2_IDENT_HV7131R		= 46000,
 
 	/* module cs53132a: just ident 53132 */
 	V4L2_IDENT_CS53l32A = 53132,
diff --git a/include/net/act_api.h b/include/net/act_api.h
index 565eed8fe49..c05fd717c58 100644
--- a/include/net/act_api.h
+++ b/include/net/act_api.h
@@ -16,7 +16,7 @@ struct tcf_common {
 	u32				tcfc_capab;
 	int				tcfc_action;
 	struct tcf_t			tcfc_tm;
-	struct gnet_stats_basic		tcfc_bstats;
+	struct gnet_stats_basic_packed	tcfc_bstats;
 	struct gnet_stats_queue		tcfc_qstats;
 	struct gnet_stats_rate_est	tcfc_rate_est;
 	spinlock_t			tcfc_lock;
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
index 80072611d26..c274993234e 100644
--- a/include/net/bluetooth/rfcomm.h
+++ b/include/net/bluetooth/rfcomm.h
@@ -355,7 +355,17 @@ struct rfcomm_dev_list_req {
 };
 
 int  rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
+
+#ifdef CONFIG_BT_RFCOMM_TTY
 int  rfcomm_init_ttys(void);
 void rfcomm_cleanup_ttys(void);
-
+#else
+static inline int rfcomm_init_ttys(void)
+{
+	return 0;
+}
+static inline void rfcomm_cleanup_ttys(void)
+{
+}
+#endif
 #endif /* __RFCOMM_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1a21895b732..d1892d66701 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -979,6 +979,10 @@ struct cfg80211_ops {
  * 	channels at a later time. This can be used for devices which do not
  * 	have calibration information gauranteed for frequencies or settings
  * 	outside of its regulatory domain.
+ * @disable_beacon_hints: enable this if your driver needs to ensure that
+ *	passive scan flags and beaconing flags may not be lifted by cfg80211
+ *	due to regulatory beacon hints. For more information on beacon
+ *	hints read the documenation for regulatory_hint_found_beacon()
  * @reg_notifier: the driver's regulatory notification callback
  * @regd: the driver's regulatory domain, if one was requested via
  * 	the regulatory_hint() API. This can be used by the driver
@@ -1004,6 +1008,7 @@ struct wiphy {
 
 	bool custom_regulatory;
 	bool strict_regulatory;
+	bool disable_beacon_hints;
 
 	enum cfg80211_signal_type signal_type;
 
diff --git a/include/net/gen_stats.h b/include/net/gen_stats.h
index d136b5240ef..c1488553e34 100644
--- a/include/net/gen_stats.h
+++ b/include/net/gen_stats.h
@@ -28,7 +28,7 @@ extern int gnet_stats_start_copy_compat(struct sk_buff *skb, int type,
 					spinlock_t *lock, struct gnet_dump *d);
 
 extern int gnet_stats_copy_basic(struct gnet_dump *d,
-				 struct gnet_stats_basic *b);
+				 struct gnet_stats_basic_packed *b);
 extern int gnet_stats_copy_rate_est(struct gnet_dump *d,
 				    struct gnet_stats_rate_est *r);
 extern int gnet_stats_copy_queue(struct gnet_dump *d,
@@ -37,14 +37,14 @@ extern int gnet_stats_copy_app(struct gnet_dump *d, void *st, int len);
 
 extern int gnet_stats_finish_copy(struct gnet_dump *d);
 
-extern int gen_new_estimator(struct gnet_stats_basic *bstats,
+extern int gen_new_estimator(struct gnet_stats_basic_packed *bstats,
 			     struct gnet_stats_rate_est *rate_est,
 			     spinlock_t *stats_lock, struct nlattr *opt);
-extern void gen_kill_estimator(struct gnet_stats_basic *bstats,
+extern void gen_kill_estimator(struct gnet_stats_basic_packed *bstats,
 			       struct gnet_stats_rate_est *rate_est);
-extern int gen_replace_estimator(struct gnet_stats_basic *bstats,
+extern int gen_replace_estimator(struct gnet_stats_basic_packed *bstats,
 				 struct gnet_stats_rate_est *rate_est,
 				 spinlock_t *stats_lock, struct nlattr *opt);
-extern bool gen_estimator_active(const struct gnet_stats_basic *bstats,
+extern bool gen_estimator_active(const struct gnet_stats_basic_packed *bstats,
 				 const struct gnet_stats_rate_est *rate_est);
 #endif
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index a632689b61b..cbdd6284996 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -258,8 +258,8 @@ static inline bool nf_ct_kill(struct nf_conn *ct)
 /* Update TCP window tracking data when NAT mangles the packet */
 extern void nf_conntrack_tcp_update(const struct sk_buff *skb,
 				    unsigned int dataoff,
-				    struct nf_conn *ct,
-				    int dir);
+				    struct nf_conn *ct, int dir,
+				    s16 offset);
 
 /* Fake conntrack entry for untracked connections */
 extern struct nf_conn nf_conntrack_untracked;
diff --git a/include/net/netfilter/xt_rateest.h b/include/net/netfilter/xt_rateest.h
index 65d594dffbf..ddbf37e1961 100644
--- a/include/net/netfilter/xt_rateest.h
+++ b/include/net/netfilter/xt_rateest.h
@@ -8,7 +8,7 @@ struct xt_rateest {
 	spinlock_t			lock;
 	struct gnet_estimator		params;
 	struct gnet_stats_rate_est	rstats;
-	struct gnet_stats_basic		bstats;
+	struct gnet_stats_basic_packed	bstats;
 };
 
 extern struct xt_rateest *xt_rateest_lookup(const char *name);
diff --git a/include/net/phonet/pn_dev.h b/include/net/phonet/pn_dev.h
index 5054dc5ea2c..29d12673661 100644
--- a/include/net/phonet/pn_dev.h
+++ b/include/net/phonet/pn_dev.h
@@ -45,6 +45,7 @@ int phonet_address_add(struct net_device *dev, u8 addr);
 int phonet_address_del(struct net_device *dev, u8 addr);
 u8 phonet_address_get(struct net_device *dev, u8 addr);
 int phonet_address_lookup(struct net *net, u8 addr);
+void phonet_address_notify(int event, struct net_device *dev, u8 addr);
 
 #define PN_NO_ADDR	0xff
 
diff --git a/include/net/rose.h b/include/net/rose.h
index cbd5364b2c8..5ba9f02731e 100644
--- a/include/net/rose.h
+++ b/include/net/rose.h
@@ -156,7 +156,7 @@ extern int  sysctl_rose_maximum_vcs;
 extern int  sysctl_rose_window_size;
 extern int  rosecmp(rose_address *, rose_address *);
 extern int  rosecmpm(rose_address *, rose_address *, unsigned short);
-extern const char *rose2asc(const rose_address *);
+extern char *rose2asc(char *buf, const rose_address *);
 extern struct sock *rose_find_socket(unsigned int, struct rose_neigh *);
 extern void rose_kill_by_neigh(struct rose_neigh *);
 extern unsigned int rose_new_lci(struct rose_neigh *);
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 964ffa0d881..5482e9582f5 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -72,7 +72,7 @@ struct Qdisc
 	 */
 	unsigned long		state;
 	struct sk_buff_head	q;
-	struct gnet_stats_basic bstats;
+	struct gnet_stats_basic_packed bstats;
 	struct gnet_stats_queue	qstats;
 };
 
diff --git a/include/net/sock.h b/include/net/sock.h
index 352f06bbd7a..950409dcec3 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -54,6 +54,7 @@
 
 #include <linux/filter.h>
 #include <linux/rculist_nulls.h>
+#include <linux/poll.h>
 
 #include <asm/atomic.h>
 #include <net/dst.h>
@@ -103,15 +104,15 @@ struct net;
 
 /**
  *	struct sock_common - minimal network layer representation of sockets
+ *	@skc_node: main hash linkage for various protocol lookup tables
+ *	@skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol
+ *	@skc_refcnt: reference count
+ *	@skc_hash: hash value used with various protocol lookup tables
  *	@skc_family: network address family
  *	@skc_state: Connection state
  *	@skc_reuse: %SO_REUSEADDR setting
  *	@skc_bound_dev_if: bound device index if != 0
- *	@skc_node: main hash linkage for various protocol lookup tables
- *	@skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol
  *	@skc_bind_node: bind hash linkage for various protocol lookup tables
- *	@skc_refcnt: reference count
- *	@skc_hash: hash value used with various protocol lookup tables
  *	@skc_prot: protocol handlers inside a network family
  *	@skc_net: reference to the network namespace of this socket
  *
@@ -119,17 +120,21 @@ struct net;
  *	for struct sock and struct inet_timewait_sock.
  */
 struct sock_common {
-	unsigned short		skc_family;
-	volatile unsigned char	skc_state;
-	unsigned char		skc_reuse;
-	int			skc_bound_dev_if;
+	/*
+	 * first fields are not copied in sock_copy()
+	 */
 	union {
 		struct hlist_node	skc_node;
 		struct hlist_nulls_node skc_nulls_node;
 	};
-	struct hlist_node	skc_bind_node;
 	atomic_t		skc_refcnt;
+
 	unsigned int		skc_hash;
+	unsigned short		skc_family;
+	volatile unsigned char	skc_state;
+	unsigned char		skc_reuse;
+	int			skc_bound_dev_if;
+	struct hlist_node	skc_bind_node;
 	struct proto		*skc_prot;
 #ifdef CONFIG_NET_NS
 	struct net	 	*skc_net;
@@ -207,15 +212,17 @@ struct sock {
 	 * don't add nothing before this first member (__sk_common) --acme
 	 */
 	struct sock_common	__sk_common;
+#define sk_node			__sk_common.skc_node
+#define sk_nulls_node		__sk_common.skc_nulls_node
+#define sk_refcnt		__sk_common.skc_refcnt
+
+#define sk_copy_start		__sk_common.skc_hash
+#define sk_hash			__sk_common.skc_hash
 #define sk_family		__sk_common.skc_family
 #define sk_state		__sk_common.skc_state
 #define sk_reuse		__sk_common.skc_reuse
 #define sk_bound_dev_if		__sk_common.skc_bound_dev_if
-#define sk_node			__sk_common.skc_node
-#define sk_nulls_node		__sk_common.skc_nulls_node
 #define sk_bind_node		__sk_common.skc_bind_node
-#define sk_refcnt		__sk_common.skc_refcnt
-#define sk_hash			__sk_common.skc_hash
 #define sk_prot			__sk_common.skc_prot
 #define sk_net			__sk_common.skc_net
 	kmemcheck_bitfield_begin(flags);
@@ -1241,6 +1248,74 @@ static inline int sk_has_allocations(const struct sock *sk)
 	return sk_wmem_alloc_get(sk) || sk_rmem_alloc_get(sk);
 }
 
+/**
+ * sk_has_sleeper - check if there are any waiting processes
+ * @sk: socket
+ *
+ * Returns true if socket has waiting processes
+ *
+ * The purpose of the sk_has_sleeper and sock_poll_wait is to wrap the memory
+ * barrier call. They were added due to the race found within the tcp code.
+ *
+ * Consider following tcp code paths:
+ *
+ * CPU1                  CPU2
+ *
+ * sys_select            receive packet
+ *   ...                 ...
+ *   __add_wait_queue    update tp->rcv_nxt
+ *   ...                 ...
+ *   tp->rcv_nxt check   sock_def_readable
+ *   ...                 {
+ *   schedule               ...
+ *                          if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ *                              wake_up_interruptible(sk->sk_sleep)
+ *                          ...
+ *                       }
+ *
+ * The race for tcp fires when the __add_wait_queue changes done by CPU1 stay
+ * in its cache, and so does the tp->rcv_nxt update on CPU2 side.  The CPU1
+ * could then endup calling schedule and sleep forever if there are no more
+ * data on the socket.
+ *
+ * The sk_has_sleeper is always called right after a call to read_lock, so we
+ * can use smp_mb__after_lock barrier.
+ */
+static inline int sk_has_sleeper(struct sock *sk)
+{
+	/*
+	 * We need to be sure we are in sync with the
+	 * add_wait_queue modifications to the wait queue.
+	 *
+	 * This memory barrier is paired in the sock_poll_wait.
+	 */
+	smp_mb__after_lock();
+	return sk->sk_sleep && waitqueue_active(sk->sk_sleep);
+}
+
+/**
+ * sock_poll_wait - place memory barrier behind the poll_wait call.
+ * @filp:           file
+ * @wait_address:   socket wait queue
+ * @p:              poll_table
+ *
+ * See the comments in the sk_has_sleeper function.
+ */
+static inline void sock_poll_wait(struct file *filp,
+		wait_queue_head_t *wait_address, poll_table *p)
+{
+	if (p && wait_address) {
+		poll_wait(filp, wait_address, p);
+		/*
+		 * We need to be sure we are in sync with the
+		 * socket flags modification.
+		 *
+		 * This memory barrier is paired in the sk_has_sleeper.
+		*/
+		smp_mb();
+	}
+}
+
 /*
  * 	Queue a received datagram if it will fit. Stream and sequenced
  *	protocols can't normally use this as they need to fit buffers in
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 19f4150f4d4..88af8430647 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1425,6 +1425,11 @@ struct tcp_request_sock_ops {
 #ifdef CONFIG_TCP_MD5SIG
 	struct tcp_md5sig_key	*(*md5_lookup) (struct sock *sk,
 						struct request_sock *req);
+	int			(*calc_md5_hash) (char *location,
+						  struct tcp_md5sig_key *md5,
+						  struct sock *sk,
+						  struct request_sock *req,
+						  struct sk_buff *skb);
 #endif
 };
 
diff --git a/include/trace/events/block.h b/include/trace/events/block.h
index d6b05f42dd4..9a74b468a22 100644
--- a/include/trace/events/block.h
+++ b/include/trace/events/block.h
@@ -1,3 +1,6 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM block
+
 #if !defined(_TRACE_BLOCK_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_BLOCK_H
 
@@ -5,9 +8,6 @@
 #include <linux/blkdev.h>
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM block
-
 TRACE_EVENT(block_rq_abort,
 
 	TP_PROTO(struct request_queue *q, struct request *rq),
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index acf4cc9cd36..7d8b5bc7418 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -1,9 +1,9 @@
-#if !defined(_TRACE_EXT4_H) || defined(TRACE_HEADER_MULTI_READ)
-#define _TRACE_EXT4_H
-
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM ext4
 
+#if !defined(_TRACE_EXT4_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EXT4_H
+
 #include <linux/writeback.h>
 #include "../../../fs/ext4/ext4.h"
 #include "../../../fs/ext4/mballoc.h"
@@ -34,7 +34,8 @@ TRACE_EVENT(ext4_free_inode,
 
 	TP_printk("dev %s ino %lu mode %d uid %u gid %u blocks %llu",
 		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->mode,
-		  __entry->uid, __entry->gid, __entry->blocks)
+		  __entry->uid, __entry->gid,
+		  (unsigned long long) __entry->blocks)
 );
 
 TRACE_EVENT(ext4_request_inode,
@@ -189,7 +190,7 @@ TRACE_EVENT(ext4_journalled_write_end,
 		  __entry->copied)
 );
 
-TRACE_EVENT(ext4_da_writepage,
+TRACE_EVENT(ext4_writepage,
 	TP_PROTO(struct inode *inode, struct page *page),
 
 	TP_ARGS(inode, page),
@@ -341,49 +342,6 @@ TRACE_EVENT(ext4_da_write_end,
 		  __entry->copied)
 );
 
-TRACE_EVENT(ext4_normal_writepage,
-	TP_PROTO(struct inode *inode, struct page *page),
-
-	TP_ARGS(inode, page),
-
-	TP_STRUCT__entry(
-		__field(	dev_t,	dev			)
-		__field(	ino_t,	ino			)
-		__field(	pgoff_t, index			)
-	),
-
-	TP_fast_assign(
-		__entry->dev	= inode->i_sb->s_dev;
-		__entry->ino	= inode->i_ino;
-		__entry->index	= page->index;
-	),
-
-	TP_printk("dev %s ino %lu page_index %lu",
-		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->index)
-);
-
-TRACE_EVENT(ext4_journalled_writepage,
-	TP_PROTO(struct inode *inode, struct page *page),
-
-	TP_ARGS(inode, page),
-
-	TP_STRUCT__entry(
-		__field(	dev_t,	dev			)
-		__field(	ino_t,	ino			)
-		__field(	pgoff_t, index			)
-
-	),
-
-	TP_fast_assign(
-		__entry->dev	= inode->i_sb->s_dev;
-		__entry->ino	= inode->i_ino;
-		__entry->index	= page->index;
-	),
-
-	TP_printk("dev %s ino %lu page_index %lu",
-		  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->index)
-);
-
 TRACE_EVENT(ext4_discard_blocks,
 	TP_PROTO(struct super_block *sb, unsigned long long blk,
 			unsigned long long count),
diff --git a/include/trace/events/irq.h b/include/trace/events/irq.h
index b0c7ede55eb..1cb0c3aa11e 100644
--- a/include/trace/events/irq.h
+++ b/include/trace/events/irq.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM irq
+
 #if !defined(_TRACE_IRQ_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_IRQ_H
 
 #include <linux/tracepoint.h>
 #include <linux/interrupt.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM irq
-
 #define softirq_name(sirq) { sirq##_SOFTIRQ, #sirq }
 #define show_softirq_name(val)			\
 	__print_symbolic(val,			\
diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h
index 845b0b4b48f..10813fa0c8d 100644
--- a/include/trace/events/jbd2.h
+++ b/include/trace/events/jbd2.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM jbd2
+
 #if !defined(_TRACE_JBD2_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_JBD2_H
 
 #include <linux/jbd2.h>
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM jbd2
-
 TRACE_EVENT(jbd2_checkpoint,
 
 	TP_PROTO(journal_t *journal, int result),
diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h
index 9baba50d651..1493c541f9c 100644
--- a/include/trace/events/kmem.h
+++ b/include/trace/events/kmem.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kmem
+
 #if !defined(_TRACE_KMEM_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_KMEM_H
 
 #include <linux/types.h>
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM kmem
-
 /*
  * The order of these masks is important. Matching masks will be seen
  * first and the left over flags will end up showing by themselves.
diff --git a/include/trace/events/lockdep.h b/include/trace/events/lockdep.h
index 0e956c9dfd7..bcf1d209a00 100644
--- a/include/trace/events/lockdep.h
+++ b/include/trace/events/lockdep.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM lockdep
+
 #if !defined(_TRACE_LOCKDEP_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_LOCKDEP_H
 
 #include <linux/lockdep.h>
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM lockdep
-
 #ifdef CONFIG_LOCKDEP
 
 TRACE_EVENT(lock_acquire,
diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h
index 24ab5bcff7b..8949bb7eb08 100644
--- a/include/trace/events/sched.h
+++ b/include/trace/events/sched.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM sched
+
 #if !defined(_TRACE_SCHED_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_SCHED_H
 
 #include <linux/sched.h>
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM sched
-
 /*
  * Tracepoint for calling kthread_stop, performed to end a kthread:
  */
diff --git a/include/trace/events/skb.h b/include/trace/events/skb.h
index 1e8fabb57c0..e499863b966 100644
--- a/include/trace/events/skb.h
+++ b/include/trace/events/skb.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM skb
+
 #if !defined(_TRACE_SKB_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_SKB_H
 
 #include <linux/skbuff.h>
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM skb
-
 /*
  * Tracepoint for free an sk_buff:
  */
diff --git a/include/trace/events/workqueue.h b/include/trace/events/workqueue.h
index 035f1bff288..fcfd9a1e4b9 100644
--- a/include/trace/events/workqueue.h
+++ b/include/trace/events/workqueue.h
@@ -1,3 +1,6 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM workqueue
+
 #if !defined(_TRACE_WORKQUEUE_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_WORKQUEUE_H
 
@@ -5,9 +8,6 @@
 #include <linux/sched.h>
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM workqueue
-
 TRACE_EVENT(workqueue_insertion,
 
 	TP_PROTO(struct task_struct *wq_thread, struct work_struct *work),
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index 1867553c61e..f64fbaae781 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -144,6 +144,9 @@
 #undef TP_fast_assign
 #define TP_fast_assign(args...) args
 
+#undef TP_perf_assign
+#define TP_perf_assign(args...)
+
 #undef TRACE_EVENT
 #define TRACE_EVENT(call, proto, args, tstruct, func, print)		\
 static int								\
@@ -345,6 +348,56 @@ static inline int ftrace_get_offsets_##call(				\
 
 #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
 
+#ifdef CONFIG_EVENT_PROFILE
+
+/*
+ * Generate the functions needed for tracepoint perf_counter support.
+ *
+ * NOTE: The insertion profile callback (ftrace_profile_<call>) is defined later
+ *
+ * static int ftrace_profile_enable_<call>(struct ftrace_event_call *event_call)
+ * {
+ * 	int ret = 0;
+ *
+ * 	if (!atomic_inc_return(&event_call->profile_count))
+ * 		ret = register_trace_<call>(ftrace_profile_<call>);
+ *
+ * 	return ret;
+ * }
+ *
+ * static void ftrace_profile_disable_<call>(struct ftrace_event_call *event_call)
+ * {
+ * 	if (atomic_add_negative(-1, &event->call->profile_count))
+ * 		unregister_trace_<call>(ftrace_profile_<call>);
+ * }
+ *
+ */
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
+									\
+static void ftrace_profile_##call(proto);				\
+									\
+static int ftrace_profile_enable_##call(struct ftrace_event_call *event_call) \
+{									\
+	int ret = 0;							\
+									\
+	if (!atomic_inc_return(&event_call->profile_count))		\
+		ret = register_trace_##call(ftrace_profile_##call);	\
+									\
+	return ret;							\
+}									\
+									\
+static void ftrace_profile_disable_##call(struct ftrace_event_call *event_call)\
+{									\
+	if (atomic_add_negative(-1, &event_call->profile_count))	\
+		unregister_trace_##call(ftrace_profile_##call);		\
+}
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+#endif
+
 /*
  * Stage 4 of the trace events.
  *
@@ -447,28 +500,6 @@ static inline int ftrace_get_offsets_##call(				\
 #define TP_FMT(fmt, args...)	fmt "\n", ##args
 
 #ifdef CONFIG_EVENT_PROFILE
-#define _TRACE_PROFILE(call, proto, args)				\
-static void ftrace_profile_##call(proto)				\
-{									\
-	extern void perf_tpcounter_event(int);				\
-	perf_tpcounter_event(event_##call.id);				\
-}									\
-									\
-static int ftrace_profile_enable_##call(struct ftrace_event_call *event_call) \
-{									\
-	int ret = 0;							\
-									\
-	if (!atomic_inc_return(&event_call->profile_count))		\
-		ret = register_trace_##call(ftrace_profile_##call);	\
-									\
-	return ret;							\
-}									\
-									\
-static void ftrace_profile_disable_##call(struct ftrace_event_call *event_call)\
-{									\
-	if (atomic_add_negative(-1, &event_call->profile_count))	\
-		unregister_trace_##call(ftrace_profile_##call);		\
-}
 
 #define _TRACE_PROFILE_INIT(call)					\
 	.profile_count = ATOMIC_INIT(-1),				\
@@ -476,7 +507,6 @@ static void ftrace_profile_disable_##call(struct ftrace_event_call *event_call)\
 	.profile_disable = ftrace_profile_disable_##call,
 
 #else
-#define _TRACE_PROFILE(call, proto, args)
 #define _TRACE_PROFILE_INIT(call)
 #endif
 
@@ -502,7 +532,6 @@ static void ftrace_profile_disable_##call(struct ftrace_event_call *event_call)\
 
 #undef TRACE_EVENT
 #define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
-_TRACE_PROFILE(call, PARAMS(proto), PARAMS(args))			\
 									\
 static struct ftrace_event_call event_##call;				\
 									\
@@ -586,6 +615,110 @@ __attribute__((section("_ftrace_events"))) event_##call = {		\
 
 #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
 
-#undef _TRACE_PROFILE
+/*
+ * Define the insertion callback to profile events
+ *
+ * The job is very similar to ftrace_raw_event_<call> except that we don't
+ * insert in the ring buffer but in a perf counter.
+ *
+ * static void ftrace_profile_<call>(proto)
+ * {
+ *	struct ftrace_data_offsets_<call> __maybe_unused __data_offsets;
+ *	struct ftrace_event_call *event_call = &event_<call>;
+ *	extern void perf_tpcounter_event(int, u64, u64, void *, int);
+ *	struct ftrace_raw_##call *entry;
+ *	u64 __addr = 0, __count = 1;
+ *	unsigned long irq_flags;
+ *	int __entry_size;
+ *	int __data_size;
+ *	int pc;
+ *
+ *	local_save_flags(irq_flags);
+ *	pc = preempt_count();
+ *
+ *	__data_size = ftrace_get_offsets_<call>(&__data_offsets, args);
+ *
+ *	// Below we want to get the aligned size by taking into account
+ *	// the u32 field that will later store the buffer size
+ *	__entry_size = ALIGN(__data_size + sizeof(*entry) + sizeof(u32),
+ *			     sizeof(u64));
+ *	__entry_size -= sizeof(u32);
+ *
+ *	do {
+ *		char raw_data[__entry_size]; <- allocate our sample in the stack
+ *		struct trace_entry *ent;
+ *
+ *		zero dead bytes from alignment to avoid stack leak to userspace:
+ *
+ *		*(u64 *)(&raw_data[__entry_size - sizeof(u64)]) = 0ULL;
+ *		entry = (struct ftrace_raw_<call> *)raw_data;
+ *		ent = &entry->ent;
+ *		tracing_generic_entry_update(ent, irq_flags, pc);
+ *		ent->type = event_call->id;
+ *
+ *		<tstruct> <- do some jobs with dynamic arrays
+ *
+ *		<assign>  <- affect our values
+ *
+ *		perf_tpcounter_event(event_call->id, __addr, __count, entry,
+ *			     __entry_size);  <- submit them to perf counter
+ *	} while (0);
+ *
+ * }
+ */
+
+#ifdef CONFIG_EVENT_PROFILE
+
+#undef __perf_addr
+#define __perf_addr(a) __addr = (a)
+
+#undef __perf_count
+#define __perf_count(c) __count = (c)
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
+static void ftrace_profile_##call(proto)				\
+{									\
+	struct ftrace_data_offsets_##call __maybe_unused __data_offsets;\
+	struct ftrace_event_call *event_call = &event_##call;		\
+	extern void perf_tpcounter_event(int, u64, u64, void *, int);	\
+	struct ftrace_raw_##call *entry;				\
+	u64 __addr = 0, __count = 1;					\
+	unsigned long irq_flags;					\
+	int __entry_size;						\
+	int __data_size;						\
+	int pc;								\
+									\
+	local_save_flags(irq_flags);					\
+	pc = preempt_count();						\
+									\
+	__data_size = ftrace_get_offsets_##call(&__data_offsets, args); \
+	__entry_size = ALIGN(__data_size + sizeof(*entry) + sizeof(u32),\
+			     sizeof(u64));				\
+	__entry_size -= sizeof(u32);					\
+									\
+	do {								\
+		char raw_data[__entry_size];				\
+		struct trace_entry *ent;				\
+									\
+		*(u64 *)(&raw_data[__entry_size - sizeof(u64)]) = 0ULL;	\
+		entry = (struct ftrace_raw_##call *)raw_data;		\
+		ent = &entry->ent;					\
+		tracing_generic_entry_update(ent, irq_flags, pc);	\
+		ent->type = event_call->id;				\
+									\
+		tstruct							\
+									\
+		{ assign; }						\
+									\
+		perf_tpcounter_event(event_call->id, __addr, __count, entry,\
+			     __entry_size);				\
+	} while (0);							\
+									\
+}
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+#endif /* CONFIG_EVENT_PROFILE */
+
 #undef _TRACE_PROFILE_INIT
 
diff --git a/init/Kconfig b/init/Kconfig
index 1ce05a4cb5f..3f7e60995c8 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -940,6 +940,7 @@ menu "Performance Counters"
 
 config PERF_COUNTERS
 	bool "Kernel Performance Counters"
+	default y if PROFILING
 	depends on HAVE_PERF_COUNTERS
 	select ANON_INODES
 	help
@@ -961,9 +962,17 @@ config PERF_COUNTERS
 	  Say Y if unsure.
 
 config EVENT_PROFILE
-	bool "Tracepoint profile sources"
-	depends on PERF_COUNTERS && EVENT_TRACER
+	bool "Tracepoint profiling sources"
+	depends on PERF_COUNTERS && EVENT_TRACING
 	default y
+	help
+	 Allow the use of tracepoints as software performance counters.
+
+	 When this is enabled, you can create perf counters based on
+	 tracepoints using PERF_TYPE_TRACEPOINT and the tracepoint ID
+	 found in debugfs://tracing/events/*/*/id. (The -e/--events
+	 option to the perf tool can parse and interpret symbolic
+	 tracepoints, in the subsystem:tracepoint_name format.)
 
 endmenu
 
diff --git a/init/main.c b/init/main.c
index 2c5ade79eb8..11f4f145be3 100644
--- a/init/main.c
+++ b/init/main.c
@@ -584,8 +584,8 @@ asmlinkage void __init start_kernel(void)
 	setup_arch(&command_line);
 	mm_init_owner(&init_mm, &init_task);
 	setup_command_line(command_line);
-	setup_per_cpu_areas();
 	setup_nr_cpu_ids();
+	setup_per_cpu_areas();
 	smp_prepare_boot_cpu();	/* arch-specific boot-cpu hooks */
 
 	build_all_zonelists();
@@ -733,13 +733,14 @@ static void __init do_ctors(void)
 int initcall_debug;
 core_param(initcall_debug, initcall_debug, bool, 0644);
 
+static char msgbuf[64];
+static struct boot_trace_call call;
+static struct boot_trace_ret ret;
+
 int do_one_initcall(initcall_t fn)
 {
 	int count = preempt_count();
 	ktime_t calltime, delta, rettime;
-	char msgbuf[64];
-	struct boot_trace_call call;
-	struct boot_trace_ret ret;
 
 	if (initcall_debug) {
 		call.caller = task_pid_nr(current);
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index e35ba2c3a8d..c5e68adc673 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -32,6 +32,7 @@
 #include <linux/nsproxy.h>
 #include <linux/pid.h>
 #include <linux/ipc_namespace.h>
+#include <linux/ima.h>
 
 #include <net/sock.h>
 #include "util.h"
@@ -733,6 +734,7 @@ SYSCALL_DEFINE4(mq_open, const char __user *, u_name, int, oflag, mode_t, mode,
 		error = PTR_ERR(filp);
 		goto out_putfd;
 	}
+	ima_counts_get(filp);
 
 	fd_install(fd, filp);
 	goto out_upsem;
diff --git a/ipc/shm.c b/ipc/shm.c
index 15dd238e533..1bc4701ef4f 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -174,7 +174,7 @@ static void shm_destroy(struct ipc_namespace *ns, struct shmid_kernel *shp)
 	shm_unlock(shp);
 	if (!is_file_hugepages(shp->shm_file))
 		shmem_lock(shp->shm_file, 0, shp->mlock_user);
-	else
+	else if (shp->mlock_user)
 		user_shm_unlock(shp->shm_file->f_path.dentry->d_inode->i_size,
 						shp->mlock_user);
 	fput (shp->shm_file);
@@ -369,8 +369,8 @@ static int newseg(struct ipc_namespace *ns, struct ipc_params *params)
 		/* hugetlb_file_setup applies strict accounting */
 		if (shmflg & SHM_NORESERVE)
 			acctflag = VM_NORESERVE;
-		file = hugetlb_file_setup(name, size, acctflag);
-		shp->mlock_user = current_user();
+		file = hugetlb_file_setup(name, size, acctflag,
+							&shp->mlock_user);
 	} else {
 		/*
 		 * Do not allow no accounting for OVERCOMMIT_NEVER, even
@@ -410,6 +410,8 @@ static int newseg(struct ipc_namespace *ns, struct ipc_params *params)
 	return error;
 
 no_id:
+	if (shp->mlock_user)	/* shmflg & SHM_HUGETLB case */
+		user_shm_unlock(size, shp->mlock_user);
 	fput(file);
 no_file:
 	security_shm_free(shp);
diff --git a/kernel/Makefile b/kernel/Makefile
index 780c8dcf451..2093a691f1c 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -96,6 +96,7 @@ obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o
 obj-$(CONFIG_FUNCTION_TRACER) += trace/
 obj-$(CONFIG_TRACING) += trace/
 obj-$(CONFIG_X86_DS) += trace/
+obj-$(CONFIG_RING_BUFFER) += trace/
 obj-$(CONFIG_SMP) += sched_cpupri.o
 obj-$(CONFIG_SLOW_WORK) += slow-work.o
 obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o
diff --git a/kernel/acct.c b/kernel/acct.c
index 7afa3156416..9f3391090b3 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -215,6 +215,7 @@ static void acct_file_reopen(struct bsd_acct_struct *acct, struct file *file,
 static int acct_on(char *name)
 {
 	struct file *file;
+	struct vfsmount *mnt;
 	int error;
 	struct pid_namespace *ns;
 	struct bsd_acct_struct *acct = NULL;
@@ -256,11 +257,12 @@ static int acct_on(char *name)
 		acct = NULL;
 	}
 
-	mnt_pin(file->f_path.mnt);
+	mnt = file->f_path.mnt;
+	mnt_pin(mnt);
 	acct_file_reopen(ns->bacct, file, ns);
 	spin_unlock(&acct_lock);
 
-	mntput(file->f_path.mnt); /* it's pinned, now give up active reference */
+	mntput(mnt); /* it's pinned, now give up active reference */
 	kfree(acct);
 
 	return 0;
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 3737a682cdf..b6eadfe30e7 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -47,6 +47,7 @@
 #include <linux/hash.h>
 #include <linux/namei.h>
 #include <linux/smp_lock.h>
+#include <linux/pid_namespace.h>
 
 #include <asm/atomic.h>
 
@@ -734,16 +735,28 @@ static void cgroup_d_remove_dir(struct dentry *dentry)
  * reference to css->refcnt. In general, this refcnt is expected to goes down
  * to zero, soon.
  *
- * CGRP_WAIT_ON_RMDIR flag is modified under cgroup's inode->i_mutex;
+ * CGRP_WAIT_ON_RMDIR flag is set under cgroup's inode->i_mutex;
  */
 DECLARE_WAIT_QUEUE_HEAD(cgroup_rmdir_waitq);
 
-static void cgroup_wakeup_rmdir_waiters(const struct cgroup *cgrp)
+static void cgroup_wakeup_rmdir_waiter(struct cgroup *cgrp)
 {
-	if (unlikely(test_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags)))
+	if (unlikely(test_and_clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags)))
 		wake_up_all(&cgroup_rmdir_waitq);
 }
 
+void cgroup_exclude_rmdir(struct cgroup_subsys_state *css)
+{
+	css_get(css);
+}
+
+void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css)
+{
+	cgroup_wakeup_rmdir_waiter(css->cgroup);
+	css_put(css);
+}
+
+
 static int rebind_subsystems(struct cgroupfs_root *root,
 			      unsigned long final_bits)
 {
@@ -960,6 +973,7 @@ static void init_cgroup_housekeeping(struct cgroup *cgrp)
 	INIT_LIST_HEAD(&cgrp->children);
 	INIT_LIST_HEAD(&cgrp->css_sets);
 	INIT_LIST_HEAD(&cgrp->release_list);
+	INIT_LIST_HEAD(&cgrp->pids_list);
 	init_rwsem(&cgrp->pids_mutex);
 }
 static void init_cgroup_root(struct cgroupfs_root *root)
@@ -1357,7 +1371,7 @@ int cgroup_attach_task(struct cgroup *cgrp, struct task_struct *tsk)
 	 * wake up rmdir() waiter. the rmdir should fail since the cgroup
 	 * is no longer empty.
 	 */
-	cgroup_wakeup_rmdir_waiters(cgrp);
+	cgroup_wakeup_rmdir_waiter(cgrp);
 	return 0;
 }
 
@@ -2201,12 +2215,30 @@ err:
 	return ret;
 }
 
+/*
+ * Cache pids for all threads in the same pid namespace that are
+ * opening the same "tasks" file.
+ */
+struct cgroup_pids {
+	/* The node in cgrp->pids_list */
+	struct list_head list;
+	/* The cgroup those pids belong to */
+	struct cgroup *cgrp;
+	/* The namepsace those pids belong to */
+	struct pid_namespace *ns;
+	/* Array of process ids in the cgroup */
+	pid_t *tasks_pids;
+	/* How many files are using the this tasks_pids array */
+	int use_count;
+	/* Length of the current tasks_pids array */
+	int length;
+};
+
 static int cmppid(const void *a, const void *b)
 {
 	return *(pid_t *)a - *(pid_t *)b;
 }
 
-
 /*
  * seq_file methods for the "tasks" file. The seq_file position is the
  * next pid to display; the seq_file iterator is a pointer to the pid
@@ -2221,45 +2253,47 @@ static void *cgroup_tasks_start(struct seq_file *s, loff_t *pos)
 	 * after a seek to the start). Use a binary-search to find the
 	 * next pid to display, if any
 	 */
-	struct cgroup *cgrp = s->private;
+	struct cgroup_pids *cp = s->private;
+	struct cgroup *cgrp = cp->cgrp;
 	int index = 0, pid = *pos;
 	int *iter;
 
 	down_read(&cgrp->pids_mutex);
 	if (pid) {
-		int end = cgrp->pids_length;
+		int end = cp->length;
 
 		while (index < end) {
 			int mid = (index + end) / 2;
-			if (cgrp->tasks_pids[mid] == pid) {
+			if (cp->tasks_pids[mid] == pid) {
 				index = mid;
 				break;
-			} else if (cgrp->tasks_pids[mid] <= pid)
+			} else if (cp->tasks_pids[mid] <= pid)
 				index = mid + 1;
 			else
 				end = mid;
 		}
 	}
 	/* If we're off the end of the array, we're done */
-	if (index >= cgrp->pids_length)
+	if (index >= cp->length)
 		return NULL;
 	/* Update the abstract position to be the actual pid that we found */
-	iter = cgrp->tasks_pids + index;
+	iter = cp->tasks_pids + index;
 	*pos = *iter;
 	return iter;
 }
 
 static void cgroup_tasks_stop(struct seq_file *s, void *v)
 {
-	struct cgroup *cgrp = s->private;
+	struct cgroup_pids *cp = s->private;
+	struct cgroup *cgrp = cp->cgrp;
 	up_read(&cgrp->pids_mutex);
 }
 
 static void *cgroup_tasks_next(struct seq_file *s, void *v, loff_t *pos)
 {
-	struct cgroup *cgrp = s->private;
+	struct cgroup_pids *cp = s->private;
 	int *p = v;
-	int *end = cgrp->tasks_pids + cgrp->pids_length;
+	int *end = cp->tasks_pids + cp->length;
 
 	/*
 	 * Advance to the next pid in the array. If this goes off the
@@ -2286,26 +2320,33 @@ static struct seq_operations cgroup_tasks_seq_operations = {
 	.show = cgroup_tasks_show,
 };
 
-static void release_cgroup_pid_array(struct cgroup *cgrp)
+static void release_cgroup_pid_array(struct cgroup_pids *cp)
 {
+	struct cgroup *cgrp = cp->cgrp;
+
 	down_write(&cgrp->pids_mutex);
-	BUG_ON(!cgrp->pids_use_count);
-	if (!--cgrp->pids_use_count) {
-		kfree(cgrp->tasks_pids);
-		cgrp->tasks_pids = NULL;
-		cgrp->pids_length = 0;
+	BUG_ON(!cp->use_count);
+	if (!--cp->use_count) {
+		list_del(&cp->list);
+		put_pid_ns(cp->ns);
+		kfree(cp->tasks_pids);
+		kfree(cp);
 	}
 	up_write(&cgrp->pids_mutex);
 }
 
 static int cgroup_tasks_release(struct inode *inode, struct file *file)
 {
-	struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
+	struct seq_file *seq;
+	struct cgroup_pids *cp;
 
 	if (!(file->f_mode & FMODE_READ))
 		return 0;
 
-	release_cgroup_pid_array(cgrp);
+	seq = file->private_data;
+	cp = seq->private;
+
+	release_cgroup_pid_array(cp);
 	return seq_release(inode, file);
 }
 
@@ -2324,6 +2365,8 @@ static struct file_operations cgroup_tasks_operations = {
 static int cgroup_tasks_open(struct inode *unused, struct file *file)
 {
 	struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
+	struct pid_namespace *ns = current->nsproxy->pid_ns;
+	struct cgroup_pids *cp;
 	pid_t *pidarray;
 	int npids;
 	int retval;
@@ -2350,20 +2393,37 @@ static int cgroup_tasks_open(struct inode *unused, struct file *file)
 	 * array if necessary
 	 */
 	down_write(&cgrp->pids_mutex);
-	kfree(cgrp->tasks_pids);
-	cgrp->tasks_pids = pidarray;
-	cgrp->pids_length = npids;
-	cgrp->pids_use_count++;
+
+	list_for_each_entry(cp, &cgrp->pids_list, list) {
+		if (ns == cp->ns)
+			goto found;
+	}
+
+	cp = kzalloc(sizeof(*cp), GFP_KERNEL);
+	if (!cp) {
+		up_write(&cgrp->pids_mutex);
+		kfree(pidarray);
+		return -ENOMEM;
+	}
+	cp->cgrp = cgrp;
+	cp->ns = ns;
+	get_pid_ns(ns);
+	list_add(&cp->list, &cgrp->pids_list);
+found:
+	kfree(cp->tasks_pids);
+	cp->tasks_pids = pidarray;
+	cp->length = npids;
+	cp->use_count++;
 	up_write(&cgrp->pids_mutex);
 
 	file->f_op = &cgroup_tasks_operations;
 
 	retval = seq_open(file, &cgroup_tasks_seq_operations);
 	if (retval) {
-		release_cgroup_pid_array(cgrp);
+		release_cgroup_pid_array(cp);
 		return retval;
 	}
-	((struct seq_file *)file->private_data)->private = cgrp;
+	((struct seq_file *)file->private_data)->private = cp;
 	return 0;
 }
 
@@ -2696,33 +2756,42 @@ again:
 	mutex_unlock(&cgroup_mutex);
 
 	/*
+	 * In general, subsystem has no css->refcnt after pre_destroy(). But
+	 * in racy cases, subsystem may have to get css->refcnt after
+	 * pre_destroy() and it makes rmdir return with -EBUSY. This sometimes
+	 * make rmdir return -EBUSY too often. To avoid that, we use waitqueue
+	 * for cgroup's rmdir. CGRP_WAIT_ON_RMDIR is for synchronizing rmdir
+	 * and subsystem's reference count handling. Please see css_get/put
+	 * and css_tryget() and cgroup_wakeup_rmdir_waiter() implementation.
+	 */
+	set_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
+
+	/*
 	 * Call pre_destroy handlers of subsys. Notify subsystems
 	 * that rmdir() request comes.
 	 */
 	ret = cgroup_call_pre_destroy(cgrp);
-	if (ret)
+	if (ret) {
+		clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
 		return ret;
+	}
 
 	mutex_lock(&cgroup_mutex);
 	parent = cgrp->parent;
 	if (atomic_read(&cgrp->count) || !list_empty(&cgrp->children)) {
+		clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
 		mutex_unlock(&cgroup_mutex);
 		return -EBUSY;
 	}
-	/*
-	 * css_put/get is provided for subsys to grab refcnt to css. In typical
-	 * case, subsystem has no reference after pre_destroy(). But, under
-	 * hierarchy management, some *temporal* refcnt can be hold.
-	 * To avoid returning -EBUSY to a user, waitqueue is used. If subsys
-	 * is really busy, it should return -EBUSY at pre_destroy(). wake_up
-	 * is called when css_put() is called and refcnt goes down to 0.
-	 */
-	set_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
 	prepare_to_wait(&cgroup_rmdir_waitq, &wait, TASK_INTERRUPTIBLE);
-
 	if (!cgroup_clear_css_refs(cgrp)) {
 		mutex_unlock(&cgroup_mutex);
-		schedule();
+		/*
+		 * Because someone may call cgroup_wakeup_rmdir_waiter() before
+		 * prepare_to_wait(), we need to check this flag.
+		 */
+		if (test_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags))
+			schedule();
 		finish_wait(&cgroup_rmdir_waitq, &wait);
 		clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
 		if (signal_pending(current))
@@ -3294,7 +3363,7 @@ void __css_put(struct cgroup_subsys_state *css)
 			set_bit(CGRP_RELEASABLE, &cgrp->flags);
 			check_for_release(cgrp);
 		}
-		cgroup_wakeup_rmdir_waiters(cgrp);
+		cgroup_wakeup_rmdir_waiter(cgrp);
 	}
 	rcu_read_unlock();
 }
diff --git a/kernel/exit.c b/kernel/exit.c
index 628d41f0dd5..869dc221733 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -12,7 +12,6 @@
 #include <linux/completion.h>
 #include <linux/personality.h>
 #include <linux/tty.h>
-#include <linux/mnt_namespace.h>
 #include <linux/iocontext.h>
 #include <linux/key.h>
 #include <linux/security.h>
diff --git a/kernel/fork.c b/kernel/fork.c
index 467746b3f0a..e6c04d462ab 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -17,7 +17,6 @@
 #include <linux/module.h>
 #include <linux/vmalloc.h>
 #include <linux/completion.h>
-#include <linux/mnt_namespace.h>
 #include <linux/personality.h>
 #include <linux/mempolicy.h>
 #include <linux/sem.h>
@@ -568,18 +567,18 @@ void mm_release(struct task_struct *tsk, struct mm_struct *mm)
 	 * the value intact in a core dump, and to save the unnecessary
 	 * trouble otherwise.  Userland only wants this done for a sys_exit.
 	 */
-	if (tsk->clear_child_tid
-	    && !(tsk->flags & PF_SIGNALED)
-	    && atomic_read(&mm->mm_users) > 1) {
-		u32 __user * tidptr = tsk->clear_child_tid;
+	if (tsk->clear_child_tid) {
+		if (!(tsk->flags & PF_SIGNALED) &&
+		    atomic_read(&mm->mm_users) > 1) {
+			/*
+			 * We don't check the error code - if userspace has
+			 * not set up a proper pointer then tough luck.
+			 */
+			put_user(0, tsk->clear_child_tid);
+			sys_futex(tsk->clear_child_tid, FUTEX_WAKE,
+					1, NULL, NULL, 0);
+		}
 		tsk->clear_child_tid = NULL;
-
-		/*
-		 * We don't check the error code - if userspace has
-		 * not set up a proper pointer then tough luck.
-		 */
-		put_user(0, tidptr);
-		sys_futex(tidptr, FUTEX_WAKE, 1, NULL, NULL, 0);
 	}
 }
 
@@ -816,11 +815,8 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
 {
 	struct signal_struct *sig;
 
-	if (clone_flags & CLONE_THREAD) {
-		atomic_inc(&current->signal->count);
-		atomic_inc(&current->signal->live);
+	if (clone_flags & CLONE_THREAD)
 		return 0;
-	}
 
 	sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL);
 	tsk->signal = sig;
@@ -878,16 +874,6 @@ void __cleanup_signal(struct signal_struct *sig)
 	kmem_cache_free(signal_cachep, sig);
 }
 
-static void cleanup_signal(struct task_struct *tsk)
-{
-	struct signal_struct *sig = tsk->signal;
-
-	atomic_dec(&sig->live);
-
-	if (atomic_dec_and_test(&sig->count))
-		__cleanup_signal(sig);
-}
-
 static void copy_flags(unsigned long clone_flags, struct task_struct *p)
 {
 	unsigned long new_flags = p->flags;
@@ -1240,6 +1226,8 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 	}
 
 	if (clone_flags & CLONE_THREAD) {
+		atomic_inc(&current->signal->count);
+		atomic_inc(&current->signal->live);
 		p->group_leader = current->group_leader;
 		list_add_tail_rcu(&p->thread_group, &p->group_leader->thread_group);
 	}
@@ -1269,6 +1257,7 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 	write_unlock_irq(&tasklist_lock);
 	proc_fork_connector(p);
 	cgroup_post_fork(p);
+	perf_counter_fork(p);
 	return p;
 
 bad_fork_free_pid:
@@ -1282,7 +1271,8 @@ bad_fork_cleanup_mm:
 	if (p->mm)
 		mmput(p->mm);
 bad_fork_cleanup_signal:
-	cleanup_signal(p);
+	if (!(clone_flags & CLONE_THREAD))
+		__cleanup_signal(p->signal);
 bad_fork_cleanup_sighand:
 	__cleanup_sighand(p->sighand);
 bad_fork_cleanup_fs:
@@ -1408,12 +1398,6 @@ long do_fork(unsigned long clone_flags,
 		if (clone_flags & CLONE_VFORK) {
 			p->vfork_done = &vfork;
 			init_completion(&vfork);
-		} else if (!(clone_flags & CLONE_VM)) {
-			/*
-			 * vfork will do an exec which will call
-			 * set_task_comm()
-			 */
-			perf_counter_fork(p);
 		}
 
 		audit_finish_fork(p);
diff --git a/kernel/freezer.c b/kernel/freezer.c
index 2f4936cf708..bd1d42b17cb 100644
--- a/kernel/freezer.c
+++ b/kernel/freezer.c
@@ -44,12 +44,19 @@ void refrigerator(void)
 	recalc_sigpending(); /* We sent fake signal, clean it up */
 	spin_unlock_irq(&current->sighand->siglock);
 
+	/* prevent accounting of that task to load */
+	current->flags |= PF_FREEZING;
+
 	for (;;) {
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		if (!frozen(current))
 			break;
 		schedule();
 	}
+
+	/* Remove the accounting blocker */
+	current->flags &= ~PF_FREEZING;
+
 	pr_debug("%s left refrigerator\n", current->comm);
 	__set_current_state(save);
 }
diff --git a/kernel/futex.c b/kernel/futex.c
index 1c337112335..e18cfbdc719 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -247,6 +247,7 @@ again:
 	if (err < 0)
 		return err;
 
+	page = compound_head(page);
 	lock_page(page);
 	if (!page->mapping) {
 		unlock_page(page);
@@ -299,7 +300,7 @@ void put_futex_key(int fshared, union futex_key *key)
 static int fault_in_user_writeable(u32 __user *uaddr)
 {
 	int ret = get_user_pages(current, current->mm, (unsigned long)uaddr,
-				 sizeof(*uaddr), 1, 0, NULL, NULL);
+				 1, 1, 0, NULL, NULL);
 	return ret < 0 ? ret : 0;
 }
 
@@ -1009,15 +1010,19 @@ void requeue_futex(struct futex_q *q, struct futex_hash_bucket *hb1,
  * requeue_pi_wake_futex() - Wake a task that acquired the lock during requeue
  * q:	the futex_q
  * key:	the key of the requeue target futex
+ * hb:  the hash_bucket of the requeue target futex
  *
  * During futex_requeue, with requeue_pi=1, it is possible to acquire the
  * target futex if it is uncontended or via a lock steal.  Set the futex_q key
  * to the requeue target futex so the waiter can detect the wakeup on the right
  * futex, but remove it from the hb and NULL the rt_waiter so it can detect
- * atomic lock acquisition.  Must be called with the q->lock_ptr held.
+ * atomic lock acquisition.  Set the q->lock_ptr to the requeue target hb->lock
+ * to protect access to the pi_state to fixup the owner later.  Must be called
+ * with both q->lock_ptr and hb->lock held.
  */
 static inline
-void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key)
+void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key,
+			   struct futex_hash_bucket *hb)
 {
 	drop_futex_key_refs(&q->key);
 	get_futex_key_refs(key);
@@ -1029,6 +1034,11 @@ void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key)
 	WARN_ON(!q->rt_waiter);
 	q->rt_waiter = NULL;
 
+	q->lock_ptr = &hb->lock;
+#ifdef CONFIG_DEBUG_PI_LIST
+	q->list.plist.lock = &hb->lock;
+#endif
+
 	wake_up_state(q->task, TASK_NORMAL);
 }
 
@@ -1087,7 +1097,7 @@ static int futex_proxy_trylock_atomic(u32 __user *pifutex,
 	ret = futex_lock_pi_atomic(pifutex, hb2, key2, ps, top_waiter->task,
 				   set_waiters);
 	if (ret == 1)
-		requeue_pi_wake_futex(top_waiter, key2);
+		requeue_pi_wake_futex(top_waiter, key2, hb2);
 
 	return ret;
 }
@@ -1246,8 +1256,15 @@ retry_private:
 		if (!match_futex(&this->key, &key1))
 			continue;
 
-		WARN_ON(!requeue_pi && this->rt_waiter);
-		WARN_ON(requeue_pi && !this->rt_waiter);
+		/*
+		 * FUTEX_WAIT_REQEUE_PI and FUTEX_CMP_REQUEUE_PI should always
+		 * be paired with each other and no other futex ops.
+		 */
+		if ((requeue_pi && !this->rt_waiter) ||
+		    (!requeue_pi && this->rt_waiter)) {
+			ret = -EINVAL;
+			break;
+		}
 
 		/*
 		 * Wake nr_wake waiters.  For requeue_pi, if we acquired the
@@ -1272,7 +1289,7 @@ retry_private:
 							this->task, 1);
 			if (ret == 1) {
 				/* We got the lock. */
-				requeue_pi_wake_futex(this, &key2);
+				requeue_pi_wake_futex(this, &key2, hb2);
 				continue;
 			} else if (ret) {
 				/* -EDEADLK */
diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c
index d607a5b9ee2..235716556bf 100644
--- a/kernel/futex_compat.c
+++ b/kernel/futex_compat.c
@@ -180,7 +180,8 @@ asmlinkage long compat_sys_futex(u32 __user *uaddr, int op, u32 val,
 	int cmd = op & FUTEX_CMD_MASK;
 
 	if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI ||
-		      cmd == FUTEX_WAIT_BITSET)) {
+		      cmd == FUTEX_WAIT_BITSET ||
+		      cmd == FUTEX_WAIT_REQUEUE_PI)) {
 		if (get_compat_timespec(&ts, utime))
 			return -EFAULT;
 		if (!timespec_valid(&ts))
@@ -191,7 +192,8 @@ asmlinkage long compat_sys_futex(u32 __user *uaddr, int op, u32 val,
 			t = ktime_add_safe(ktime_get(), t);
 		tp = &t;
 	}
-	if (cmd == FUTEX_REQUEUE || cmd == FUTEX_CMP_REQUEUE)
+	if (cmd == FUTEX_REQUEUE || cmd == FUTEX_CMP_REQUEUE ||
+	    cmd == FUTEX_CMP_REQUEUE_PI || cmd == FUTEX_WAKE_OP)
 		val2 = (int) (unsigned long) utime;
 
 	return do_futex(uaddr, op, val, tp, uaddr2, val2, val3);
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 9002958a96e..49da79ab848 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -191,6 +191,46 @@ struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
 	}
 }
 
+
+/*
+ * Get the preferred target CPU for NOHZ
+ */
+static int hrtimer_get_target(int this_cpu, int pinned)
+{
+#ifdef CONFIG_NO_HZ
+	if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu)) {
+		int preferred_cpu = get_nohz_load_balancer();
+
+		if (preferred_cpu >= 0)
+			return preferred_cpu;
+	}
+#endif
+	return this_cpu;
+}
+
+/*
+ * With HIGHRES=y we do not migrate the timer when it is expiring
+ * before the next event on the target cpu because we cannot reprogram
+ * the target cpu hardware and we would cause it to fire late.
+ *
+ * Called with cpu_base->lock of target cpu held.
+ */
+static int
+hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base)
+{
+#ifdef CONFIG_HIGH_RES_TIMERS
+	ktime_t expires;
+
+	if (!new_base->cpu_base->hres_active)
+		return 0;
+
+	expires = ktime_sub(hrtimer_get_expires(timer), new_base->offset);
+	return expires.tv64 <= new_base->cpu_base->expires_next.tv64;
+#else
+	return 0;
+#endif
+}
+
 /*
  * Switch the timer base to the current CPU when possible.
  */
@@ -200,16 +240,8 @@ switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
 {
 	struct hrtimer_clock_base *new_base;
 	struct hrtimer_cpu_base *new_cpu_base;
-	int cpu, preferred_cpu = -1;
-
-	cpu = smp_processor_id();
-#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
-	if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu)) {
-		preferred_cpu = get_nohz_load_balancer();
-		if (preferred_cpu >= 0)
-			cpu = preferred_cpu;
-	}
-#endif
+	int this_cpu = smp_processor_id();
+	int cpu = hrtimer_get_target(this_cpu, pinned);
 
 again:
 	new_cpu_base = &per_cpu(hrtimer_bases, cpu);
@@ -217,7 +249,7 @@ again:
 
 	if (base != new_base) {
 		/*
-		 * We are trying to schedule the timer on the local CPU.
+		 * We are trying to move timer to new_base.
 		 * However we can't change timer's base while it is running,
 		 * so we keep it on the same CPU. No hassle vs. reprogramming
 		 * the event source in the high resolution case. The softirq
@@ -233,38 +265,12 @@ again:
 		spin_unlock(&base->cpu_base->lock);
 		spin_lock(&new_base->cpu_base->lock);
 
-		/* Optimized away for NOHZ=n SMP=n */
-		if (cpu == preferred_cpu) {
-			/* Calculate clock monotonic expiry time */
-#ifdef CONFIG_HIGH_RES_TIMERS
-			ktime_t expires = ktime_sub(hrtimer_get_expires(timer),
-							new_base->offset);
-#else
-			ktime_t expires = hrtimer_get_expires(timer);
-#endif
-
-			/*
-			 * Get the next event on target cpu from the
-			 * clock events layer.
-			 * This covers the highres=off nohz=on case as well.
-			 */
-			ktime_t next = clockevents_get_next_event(cpu);
-
-			ktime_t delta = ktime_sub(expires, next);
-
-			/*
-			 * We do not migrate the timer when it is expiring
-			 * before the next event on the target cpu because
-			 * we cannot reprogram the target cpu hardware and
-			 * we would cause it to fire late.
-			 */
-			if (delta.tv64 < 0) {
-				cpu = smp_processor_id();
-				spin_unlock(&new_base->cpu_base->lock);
-				spin_lock(&base->cpu_base->lock);
-				timer->base = base;
-				goto again;
-			}
+		if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) {
+			cpu = this_cpu;
+			spin_unlock(&new_base->cpu_base->lock);
+			spin_lock(&base->cpu_base->lock);
+			timer->base = base;
+			goto again;
 		}
 		timer->base = new_base;
 	}
@@ -1276,14 +1282,22 @@ void hrtimer_interrupt(struct clock_event_device *dev)
 
 	expires_next.tv64 = KTIME_MAX;
 
+	spin_lock(&cpu_base->lock);
+	/*
+	 * We set expires_next to KTIME_MAX here with cpu_base->lock
+	 * held to prevent that a timer is enqueued in our queue via
+	 * the migration code. This does not affect enqueueing of
+	 * timers which run their callback and need to be requeued on
+	 * this CPU.
+	 */
+	cpu_base->expires_next.tv64 = KTIME_MAX;
+
 	base = cpu_base->clock_base;
 
 	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
 		ktime_t basenow;
 		struct rb_node *node;
 
-		spin_lock(&cpu_base->lock);
-
 		basenow = ktime_add(now, base->offset);
 
 		while ((node = base->first)) {
@@ -1316,11 +1330,15 @@ void hrtimer_interrupt(struct clock_event_device *dev)
 
 			__run_hrtimer(timer);
 		}
-		spin_unlock(&cpu_base->lock);
 		base++;
 	}
 
+	/*
+	 * Store the new expiry value so the migration code can verify
+	 * against it.
+	 */
 	cpu_base->expires_next = expires_next;
+	spin_unlock(&cpu_base->lock);
 
 	/* Reprogramming necessary ? */
 	if (expires_next.tv64 != KTIME_MAX) {
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 73468253143..e70ed5592eb 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -42,8 +42,7 @@ static inline void unregister_handler_proc(unsigned int irq,
 
 extern int irq_select_affinity_usr(unsigned int irq);
 
-extern void
-irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask);
+extern void irq_set_thread_affinity(struct irq_desc *desc);
 
 /*
  * Debugging printout:
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 50da6767290..0ec9ed83173 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -80,14 +80,22 @@ int irq_can_set_affinity(unsigned int irq)
 	return 1;
 }
 
-void
-irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask)
+/**
+ *	irq_set_thread_affinity - Notify irq threads to adjust affinity
+ *	@desc:		irq descriptor which has affitnity changed
+ *
+ *	We just set IRQTF_AFFINITY and delegate the affinity setting
+ *	to the interrupt thread itself. We can not call
+ *	set_cpus_allowed_ptr() here as we hold desc->lock and this
+ *	code can be called from hard interrupt context.
+ */
+void irq_set_thread_affinity(struct irq_desc *desc)
 {
 	struct irqaction *action = desc->action;
 
 	while (action) {
 		if (action->thread)
-			set_cpus_allowed_ptr(action->thread, cpumask);
+			set_bit(IRQTF_AFFINITY, &action->thread_flags);
 		action = action->next;
 	}
 }
@@ -112,7 +120,7 @@ int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 	if (desc->status & IRQ_MOVE_PCNTXT) {
 		if (!desc->chip->set_affinity(irq, cpumask)) {
 			cpumask_copy(desc->affinity, cpumask);
-			irq_set_thread_affinity(desc, cpumask);
+			irq_set_thread_affinity(desc);
 		}
 	}
 	else {
@@ -122,7 +130,7 @@ int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 #else
 	if (!desc->chip->set_affinity(irq, cpumask)) {
 		cpumask_copy(desc->affinity, cpumask);
-		irq_set_thread_affinity(desc, cpumask);
+		irq_set_thread_affinity(desc);
 	}
 #endif
 	desc->status |= IRQ_AFFINITY_SET;
@@ -176,7 +184,7 @@ int irq_select_affinity_usr(unsigned int irq)
 	spin_lock_irqsave(&desc->lock, flags);
 	ret = setup_affinity(irq, desc);
 	if (!ret)
-		irq_set_thread_affinity(desc, desc->affinity);
+		irq_set_thread_affinity(desc);
 	spin_unlock_irqrestore(&desc->lock, flags);
 
 	return ret;
@@ -443,6 +451,39 @@ static int irq_wait_for_interrupt(struct irqaction *action)
 	return -1;
 }
 
+#ifdef CONFIG_SMP
+/*
+ * Check whether we need to change the affinity of the interrupt thread.
+ */
+static void
+irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
+{
+	cpumask_var_t mask;
+
+	if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
+		return;
+
+	/*
+	 * In case we are out of memory we set IRQTF_AFFINITY again and
+	 * try again next time
+	 */
+	if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
+		set_bit(IRQTF_AFFINITY, &action->thread_flags);
+		return;
+	}
+
+	spin_lock_irq(&desc->lock);
+	cpumask_copy(mask, desc->affinity);
+	spin_unlock_irq(&desc->lock);
+
+	set_cpus_allowed_ptr(current, mask);
+	free_cpumask_var(mask);
+}
+#else
+static inline void
+irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
+#endif
+
 /*
  * Interrupt handler thread
  */
@@ -458,6 +499,8 @@ static int irq_thread(void *data)
 
 	while (!irq_wait_for_interrupt(action)) {
 
+		irq_thread_check_affinity(desc, action);
+
 		atomic_inc(&desc->threads_active);
 
 		spin_lock_irq(&desc->lock);
@@ -564,7 +607,6 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
 		 */
 		get_task_struct(t);
 		new->thread = t;
-		wake_up_process(t);
 	}
 
 	/*
@@ -647,6 +689,7 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
 				(int)(new->flags & IRQF_TRIGGER_MASK));
 	}
 
+	new->irq = irq;
 	*old_ptr = new;
 
 	/* Reset broken irq detection when installing new handler */
@@ -664,7 +707,13 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
 
 	spin_unlock_irqrestore(&desc->lock, flags);
 
-	new->irq = irq;
+	/*
+	 * Strictly no need to wake it up, but hung_task complains
+	 * when no hard interrupt wakes the thread up.
+	 */
+	if (new->thread)
+		wake_up_process(new->thread);
+
 	register_irq_proc(irq, desc);
 	new->dir = NULL;
 	register_handler_proc(irq, new);
@@ -718,7 +767,6 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
 	struct irqaction *action, **action_ptr;
-	struct task_struct *irqthread;
 	unsigned long flags;
 
 	WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
@@ -766,9 +814,6 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
 			desc->chip->disable(irq);
 	}
 
-	irqthread = action->thread;
-	action->thread = NULL;
-
 	spin_unlock_irqrestore(&desc->lock, flags);
 
 	unregister_handler_proc(irq, action);
@@ -776,12 +821,6 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
 	/* Make sure it's not being used on another CPU: */
 	synchronize_irq(irq);
 
-	if (irqthread) {
-		if (!test_bit(IRQTF_DIED, &action->thread_flags))
-			kthread_stop(irqthread);
-		put_task_struct(irqthread);
-	}
-
 #ifdef CONFIG_DEBUG_SHIRQ
 	/*
 	 * It's a shared IRQ -- the driver ought to be prepared for an IRQ
@@ -797,6 +836,13 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
 		local_irq_restore(flags);
 	}
 #endif
+
+	if (action->thread) {
+		if (!test_bit(IRQTF_DIED, &action->thread_flags))
+			kthread_stop(action->thread);
+		put_task_struct(action->thread);
+	}
+
 	return action;
 }
 
diff --git a/kernel/irq/migration.c b/kernel/irq/migration.c
index cfe767ca154..fcb6c96f262 100644
--- a/kernel/irq/migration.c
+++ b/kernel/irq/migration.c
@@ -45,7 +45,7 @@ void move_masked_irq(int irq)
 		   < nr_cpu_ids))
 		if (!desc->chip->set_affinity(irq, desc->pending_mask)) {
 			cpumask_copy(desc->affinity, desc->pending_mask);
-			irq_set_thread_affinity(desc, desc->pending_mask);
+			irq_set_thread_affinity(desc);
 		}
 
 	cpumask_clear(desc->pending_mask);
diff --git a/kernel/irq/numa_migrate.c b/kernel/irq/numa_migrate.c
index 2f69bee57bf..3fd30197da2 100644
--- a/kernel/irq/numa_migrate.c
+++ b/kernel/irq/numa_migrate.c
@@ -107,8 +107,8 @@ out_unlock:
 
 struct irq_desc *move_irq_desc(struct irq_desc *desc, int node)
 {
-	/* those all static, do move them */
-	if (desc->irq < NR_IRQS_LEGACY)
+	/* those static or target node is -1, do not move them */
+	if (desc->irq < NR_IRQS_LEGACY || node == -1)
 		return desc;
 
 	if (desc->node != node)
diff --git a/kernel/kexec.c b/kernel/kexec.c
index ae1c35201cc..f336e2107f9 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1228,7 +1228,7 @@ static int __init parse_crashkernel_mem(char 			*cmdline,
 	} while (*cur++ == ',');
 
 	if (*crash_size > 0) {
-		while (*cur != ' ' && *cur != '@')
+		while (*cur && *cur != ' ' && *cur != '@')
 			cur++;
 		if (*cur == '@') {
 			cur++;
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 7e95bedb2bf..385c31a1bdb 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -24,7 +24,6 @@
 #include <linux/unistd.h>
 #include <linux/kmod.h>
 #include <linux/slab.h>
-#include <linux/mnt_namespace.h>
 #include <linux/completion.h>
 #include <linux/file.h>
 #include <linux/fdtable.h>
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index c0fa54b276d..0540948e29a 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -237,13 +237,9 @@ static int __kprobes collect_garbage_slots(void)
 {
 	struct kprobe_insn_page *kip;
 	struct hlist_node *pos, *next;
-	int safety;
 
 	/* Ensure no-one is preepmted on the garbages */
-	mutex_unlock(&kprobe_insn_mutex);
-	safety = check_safety();
-	mutex_lock(&kprobe_insn_mutex);
-	if (safety != 0)
+	if (check_safety())
 		return -EAGAIN;
 
 	hlist_for_each_entry_safe(kip, pos, next, &kprobe_insn_pages, hlist) {
@@ -698,7 +694,7 @@ int __kprobes register_kprobe(struct kprobe *p)
 	p->addr = addr;
 
 	preempt_disable();
-	if (!__kernel_text_address((unsigned long) p->addr) ||
+	if (!kernel_text_address((unsigned long) p->addr) ||
 	    in_kprobes_functions((unsigned long) p->addr)) {
 		preempt_enable();
 		return -EINVAL;
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 9b1a7de2697..eb8751aa041 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -180,10 +180,12 @@ EXPORT_SYMBOL(kthread_bind);
  * @k: thread created by kthread_create().
  *
  * Sets kthread_should_stop() for @k to return true, wakes it, and
- * waits for it to exit.  Your threadfn() must not call do_exit()
- * itself if you use this function!  This can also be called after
- * kthread_create() instead of calling wake_up_process(): the thread
- * will exit without calling threadfn().
+ * waits for it to exit. This can also be called after kthread_create()
+ * instead of calling wake_up_process(): the thread will exit without
+ * calling threadfn().
+ *
+ * If threadfn() may call do_exit() itself, the caller must ensure
+ * task_struct can't go away.
  *
  * Returns the result of threadfn(), or %-EINTR if wake_up_process()
  * was never called.
diff --git a/kernel/lockdep_proc.c b/kernel/lockdep_proc.c
index d7135aa2d2c..e94caa666db 100644
--- a/kernel/lockdep_proc.c
+++ b/kernel/lockdep_proc.c
@@ -758,7 +758,8 @@ static int __init lockdep_proc_init(void)
 		    &proc_lockdep_stats_operations);
 
 #ifdef CONFIG_LOCK_STAT
-	proc_create("lock_stat", S_IRUSR, NULL, &proc_lock_stat_operations);
+	proc_create("lock_stat", S_IRUSR | S_IWUSR, NULL,
+		    &proc_lock_stat_operations);
 #endif
 
 	return 0;
diff --git a/kernel/module.c b/kernel/module.c
index 38928fcaff2..2d537186191 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -909,16 +909,18 @@ void __symbol_put(const char *symbol)
 }
 EXPORT_SYMBOL(__symbol_put);
 
+/* Note this assumes addr is a function, which it currently always is. */
 void symbol_put_addr(void *addr)
 {
 	struct module *modaddr;
+	unsigned long a = (unsigned long)dereference_function_descriptor(addr);
 
-	if (core_kernel_text((unsigned long)addr))
+	if (core_kernel_text(a))
 		return;
 
 	/* module_text_address is safe here: we're supposed to have reference
 	 * to module from symbol_get, so it can't go away. */
-	modaddr = __module_text_address((unsigned long)addr);
+	modaddr = __module_text_address(a);
 	BUG_ON(!modaddr);
 	module_put(modaddr);
 }
@@ -1068,7 +1070,8 @@ static inline int check_modstruct_version(Elf_Shdr *sechdrs,
 {
 	const unsigned long *crc;
 
-	if (!find_symbol("module_layout", NULL, &crc, true, false))
+	if (!find_symbol(MODULE_SYMBOL_PREFIX "module_layout", NULL,
+			 &crc, true, false))
 		BUG();
 	return check_version(sechdrs, versindex, "module_layout", mod, crc);
 }
@@ -1271,6 +1274,10 @@ static void add_notes_attrs(struct module *mod, unsigned int nsect,
 	struct module_notes_attrs *notes_attrs;
 	struct bin_attribute *nattr;
 
+	/* failed to create section attributes, so can't create notes */
+	if (!mod->sect_attrs)
+		return;
+
 	/* Count notes sections and allocate structures.  */
 	notes = 0;
 	for (i = 0; i < nsect; i++)
@@ -2451,9 +2458,9 @@ SYSCALL_DEFINE3(init_module, void __user *, umod,
 		return ret;
 	}
 	if (ret > 0) {
-		printk(KERN_WARNING "%s: '%s'->init suspiciously returned %d, "
-				    "it should follow 0/-E convention\n"
-		       KERN_WARNING "%s: loading module anyway...\n",
+		printk(KERN_WARNING
+"%s: '%s'->init suspiciously returned %d, it should follow 0/-E convention\n"
+"%s: loading module anyway...\n",
 		       __func__, mod->name, ret,
 		       __func__);
 		dump_stack();
diff --git a/kernel/panic.c b/kernel/panic.c
index 984b3ecbd72..512ab73b0ca 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -301,6 +301,7 @@ int oops_may_print(void)
  */
 void oops_enter(void)
 {
+	tracing_off();
 	/* can't trust the integrity of the kernel anymore: */
 	debug_locks_off();
 	do_oops_enter_exit();
diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c
index 1a933a221ea..d7cbc579fc8 100644
--- a/kernel/perf_counter.c
+++ b/kernel/perf_counter.c
@@ -42,6 +42,7 @@ static int perf_overcommit __read_mostly = 1;
 static atomic_t nr_counters __read_mostly;
 static atomic_t nr_mmap_counters __read_mostly;
 static atomic_t nr_comm_counters __read_mostly;
+static atomic_t nr_task_counters __read_mostly;
 
 /*
  * perf counter paranoia level:
@@ -49,7 +50,7 @@ static atomic_t nr_comm_counters __read_mostly;
  *  1 - disallow cpu counters to unpriv
  *  2 - disallow kernel profiling to unpriv
  */
-int sysctl_perf_counter_paranoid __read_mostly;
+int sysctl_perf_counter_paranoid __read_mostly = 1;
 
 static inline bool perf_paranoid_cpu(void)
 {
@@ -87,6 +88,7 @@ void __weak hw_perf_disable(void)		{ barrier(); }
 void __weak hw_perf_enable(void)		{ barrier(); }
 
 void __weak hw_perf_counter_setup(int cpu)	{ barrier(); }
+void __weak hw_perf_counter_setup_online(int cpu)	{ barrier(); }
 
 int __weak
 hw_perf_group_sched_in(struct perf_counter *group_leader,
@@ -146,6 +148,28 @@ static void put_ctx(struct perf_counter_context *ctx)
 	}
 }
 
+static void unclone_ctx(struct perf_counter_context *ctx)
+{
+	if (ctx->parent_ctx) {
+		put_ctx(ctx->parent_ctx);
+		ctx->parent_ctx = NULL;
+	}
+}
+
+/*
+ * If we inherit counters we want to return the parent counter id
+ * to userspace.
+ */
+static u64 primary_counter_id(struct perf_counter *counter)
+{
+	u64 id = counter->id;
+
+	if (counter->parent)
+		id = counter->parent->id;
+
+	return id;
+}
+
 /*
  * Get the perf_counter_context for a task and lock it.
  * This has to cope with with the fact that until it is locked,
@@ -236,6 +260,8 @@ list_add_counter(struct perf_counter *counter, struct perf_counter_context *ctx)
 
 	list_add_rcu(&counter->event_entry, &ctx->event_list);
 	ctx->nr_counters++;
+	if (counter->attr.inherit_stat)
+		ctx->nr_stat++;
 }
 
 /*
@@ -250,6 +276,8 @@ list_del_counter(struct perf_counter *counter, struct perf_counter_context *ctx)
 	if (list_empty(&counter->list_entry))
 		return;
 	ctx->nr_counters--;
+	if (counter->attr.inherit_stat)
+		ctx->nr_stat--;
 
 	list_del_init(&counter->list_entry);
 	list_del_rcu(&counter->event_entry);
@@ -279,6 +307,10 @@ counter_sched_out(struct perf_counter *counter,
 		return;
 
 	counter->state = PERF_COUNTER_STATE_INACTIVE;
+	if (counter->pending_disable) {
+		counter->pending_disable = 0;
+		counter->state = PERF_COUNTER_STATE_OFF;
+	}
 	counter->tstamp_stopped = ctx->time;
 	counter->pmu->disable(counter);
 	counter->oncpu = -1;
@@ -1006,6 +1038,81 @@ static int context_equiv(struct perf_counter_context *ctx1,
 		&& !ctx1->pin_count && !ctx2->pin_count;
 }
 
+static void __perf_counter_read(void *counter);
+
+static void __perf_counter_sync_stat(struct perf_counter *counter,
+				     struct perf_counter *next_counter)
+{
+	u64 value;
+
+	if (!counter->attr.inherit_stat)
+		return;
+
+	/*
+	 * Update the counter value, we cannot use perf_counter_read()
+	 * because we're in the middle of a context switch and have IRQs
+	 * disabled, which upsets smp_call_function_single(), however
+	 * we know the counter must be on the current CPU, therefore we
+	 * don't need to use it.
+	 */
+	switch (counter->state) {
+	case PERF_COUNTER_STATE_ACTIVE:
+		__perf_counter_read(counter);
+		break;
+
+	case PERF_COUNTER_STATE_INACTIVE:
+		update_counter_times(counter);
+		break;
+
+	default:
+		break;
+	}
+
+	/*
+	 * In order to keep per-task stats reliable we need to flip the counter
+	 * values when we flip the contexts.
+	 */
+	value = atomic64_read(&next_counter->count);
+	value = atomic64_xchg(&counter->count, value);
+	atomic64_set(&next_counter->count, value);
+
+	swap(counter->total_time_enabled, next_counter->total_time_enabled);
+	swap(counter->total_time_running, next_counter->total_time_running);
+
+	/*
+	 * Since we swizzled the values, update the user visible data too.
+	 */
+	perf_counter_update_userpage(counter);
+	perf_counter_update_userpage(next_counter);
+}
+
+#define list_next_entry(pos, member) \
+	list_entry(pos->member.next, typeof(*pos), member)
+
+static void perf_counter_sync_stat(struct perf_counter_context *ctx,
+				   struct perf_counter_context *next_ctx)
+{
+	struct perf_counter *counter, *next_counter;
+
+	if (!ctx->nr_stat)
+		return;
+
+	counter = list_first_entry(&ctx->event_list,
+				   struct perf_counter, event_entry);
+
+	next_counter = list_first_entry(&next_ctx->event_list,
+					struct perf_counter, event_entry);
+
+	while (&counter->event_entry != &ctx->event_list &&
+	       &next_counter->event_entry != &next_ctx->event_list) {
+
+		__perf_counter_sync_stat(counter, next_counter);
+
+		counter = list_next_entry(counter, event_entry);
+		next_counter = list_next_entry(next_counter, event_entry);
+	}
+}
+
 /*
  * Called from scheduler to remove the counters of the current task,
  * with interrupts disabled.
@@ -1061,6 +1168,8 @@ void perf_counter_task_sched_out(struct task_struct *task,
 			ctx->task = next;
 			next_ctx->task = task;
 			do_switch = 0;
+
+			perf_counter_sync_stat(ctx, next_ctx);
 		}
 		spin_unlock(&next_ctx->lock);
 		spin_unlock(&ctx->lock);
@@ -1207,7 +1316,6 @@ static void perf_counter_cpu_sched_in(struct perf_cpu_context *cpuctx, int cpu)
 #define MAX_INTERRUPTS (~0ULL)
 
 static void perf_log_throttle(struct perf_counter *counter, int enable);
-static void perf_log_period(struct perf_counter *counter, u64 period);
 
 static void perf_adjust_period(struct perf_counter *counter, u64 events)
 {
@@ -1226,8 +1334,6 @@ static void perf_adjust_period(struct perf_counter *counter, u64 events)
 	if (!sample_period)
 		sample_period = 1;
 
-	perf_log_period(counter, sample_period);
-
 	hwc->sample_period = sample_period;
 }
 
@@ -1348,14 +1454,70 @@ void perf_counter_task_tick(struct task_struct *curr, int cpu)
 }
 
 /*
+ * Enable all of a task's counters that have been marked enable-on-exec.
+ * This expects task == current.
+ */
+static void perf_counter_enable_on_exec(struct task_struct *task)
+{
+	struct perf_counter_context *ctx;
+	struct perf_counter *counter;
+	unsigned long flags;
+	int enabled = 0;
+
+	local_irq_save(flags);
+	ctx = task->perf_counter_ctxp;
+	if (!ctx || !ctx->nr_counters)
+		goto out;
+
+	__perf_counter_task_sched_out(ctx);
+
+	spin_lock(&ctx->lock);
+
+	list_for_each_entry(counter, &ctx->counter_list, list_entry) {
+		if (!counter->attr.enable_on_exec)
+			continue;
+		counter->attr.enable_on_exec = 0;
+		if (counter->state >= PERF_COUNTER_STATE_INACTIVE)
+			continue;
+		counter->state = PERF_COUNTER_STATE_INACTIVE;
+		counter->tstamp_enabled =
+			ctx->time - counter->total_time_enabled;
+		enabled = 1;
+	}
+
+	/*
+	 * Unclone this context if we enabled any counter.
+	 */
+	if (enabled)
+		unclone_ctx(ctx);
+
+	spin_unlock(&ctx->lock);
+
+	perf_counter_task_sched_in(task, smp_processor_id());
+ out:
+	local_irq_restore(flags);
+}
+
+/*
  * Cross CPU call to read the hardware counter
  */
-static void __read(void *info)
+static void __perf_counter_read(void *info)
 {
+	struct perf_cpu_context *cpuctx = &__get_cpu_var(perf_cpu_context);
 	struct perf_counter *counter = info;
 	struct perf_counter_context *ctx = counter->ctx;
 	unsigned long flags;
 
+	/*
+	 * If this is a task context, we need to check whether it is
+	 * the current task context of this cpu.  If not it has been
+	 * scheduled out before the smp call arrived.  In that case
+	 * counter->count would have been updated to a recent sample
+	 * when the counter was scheduled out.
+	 */
+	if (ctx->task && cpuctx->task_ctx != ctx)
+		return;
+
 	local_irq_save(flags);
 	if (ctx->is_active)
 		update_context_time(ctx);
@@ -1372,7 +1534,7 @@ static u64 perf_counter_read(struct perf_counter *counter)
 	 */
 	if (counter->state == PERF_COUNTER_STATE_ACTIVE) {
 		smp_call_function_single(counter->oncpu,
-					 __read, counter, 1);
+					 __perf_counter_read, counter, 1);
 	} else if (counter->state == PERF_COUNTER_STATE_INACTIVE) {
 		update_counter_times(counter);
 	}
@@ -1398,7 +1560,6 @@ __perf_counter_init_context(struct perf_counter_context *ctx,
 
 static struct perf_counter_context *find_get_context(pid_t pid, int cpu)
 {
-	struct perf_counter_context *parent_ctx;
 	struct perf_counter_context *ctx;
 	struct perf_cpu_context *cpuctx;
 	struct task_struct *task;
@@ -1458,11 +1619,7 @@ static struct perf_counter_context *find_get_context(pid_t pid, int cpu)
  retry:
 	ctx = perf_lock_task_context(task, &flags);
 	if (ctx) {
-		parent_ctx = ctx->parent_ctx;
-		if (parent_ctx) {
-			put_ctx(parent_ctx);
-			ctx->parent_ctx = NULL;		/* no longer a clone */
-		}
+		unclone_ctx(ctx);
 		spin_unlock_irqrestore(&ctx->lock, flags);
 	}
 
@@ -1508,11 +1665,15 @@ static void free_counter(struct perf_counter *counter)
 {
 	perf_pending_sync(counter);
 
-	atomic_dec(&nr_counters);
-	if (counter->attr.mmap)
-		atomic_dec(&nr_mmap_counters);
-	if (counter->attr.comm)
-		atomic_dec(&nr_comm_counters);
+	if (!counter->parent) {
+		atomic_dec(&nr_counters);
+		if (counter->attr.mmap)
+			atomic_dec(&nr_mmap_counters);
+		if (counter->attr.comm)
+			atomic_dec(&nr_comm_counters);
+		if (counter->attr.task)
+			atomic_dec(&nr_task_counters);
+	}
 
 	if (counter->destroy)
 		counter->destroy(counter);
@@ -1546,14 +1707,133 @@ static int perf_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
+static int perf_counter_read_size(struct perf_counter *counter)
+{
+	int entry = sizeof(u64); /* value */
+	int size = 0;
+	int nr = 1;
+
+	if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
+		size += sizeof(u64);
+
+	if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
+		size += sizeof(u64);
+
+	if (counter->attr.read_format & PERF_FORMAT_ID)
+		entry += sizeof(u64);
+
+	if (counter->attr.read_format & PERF_FORMAT_GROUP) {
+		nr += counter->group_leader->nr_siblings;
+		size += sizeof(u64);
+	}
+
+	size += entry * nr;
+
+	return size;
+}
+
+static u64 perf_counter_read_value(struct perf_counter *counter)
+{
+	struct perf_counter *child;
+	u64 total = 0;
+
+	total += perf_counter_read(counter);
+	list_for_each_entry(child, &counter->child_list, child_list)
+		total += perf_counter_read(child);
+
+	return total;
+}
+
+static int perf_counter_read_entry(struct perf_counter *counter,
+				   u64 read_format, char __user *buf)
+{
+	int n = 0, count = 0;
+	u64 values[2];
+
+	values[n++] = perf_counter_read_value(counter);
+	if (read_format & PERF_FORMAT_ID)
+		values[n++] = primary_counter_id(counter);
+
+	count = n * sizeof(u64);
+
+	if (copy_to_user(buf, values, count))
+		return -EFAULT;
+
+	return count;
+}
+
+static int perf_counter_read_group(struct perf_counter *counter,
+				   u64 read_format, char __user *buf)
+{
+	struct perf_counter *leader = counter->group_leader, *sub;
+	int n = 0, size = 0, err = -EFAULT;
+	u64 values[3];
+
+	values[n++] = 1 + leader->nr_siblings;
+	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
+		values[n++] = leader->total_time_enabled +
+			atomic64_read(&leader->child_total_time_enabled);
+	}
+	if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
+		values[n++] = leader->total_time_running +
+			atomic64_read(&leader->child_total_time_running);
+	}
+
+	size = n * sizeof(u64);
+
+	if (copy_to_user(buf, values, size))
+		return -EFAULT;
+
+	err = perf_counter_read_entry(leader, read_format, buf + size);
+	if (err < 0)
+		return err;
+
+	size += err;
+
+	list_for_each_entry(sub, &leader->sibling_list, list_entry) {
+		err = perf_counter_read_entry(sub, read_format,
+				buf + size);
+		if (err < 0)
+			return err;
+
+		size += err;
+	}
+
+	return size;
+}
+
+static int perf_counter_read_one(struct perf_counter *counter,
+				 u64 read_format, char __user *buf)
+{
+	u64 values[4];
+	int n = 0;
+
+	values[n++] = perf_counter_read_value(counter);
+	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
+		values[n++] = counter->total_time_enabled +
+			atomic64_read(&counter->child_total_time_enabled);
+	}
+	if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
+		values[n++] = counter->total_time_running +
+			atomic64_read(&counter->child_total_time_running);
+	}
+	if (read_format & PERF_FORMAT_ID)
+		values[n++] = primary_counter_id(counter);
+
+	if (copy_to_user(buf, values, n * sizeof(u64)))
+		return -EFAULT;
+
+	return n * sizeof(u64);
+}
+
 /*
  * Read the performance counter - simple non blocking version for now
  */
 static ssize_t
 perf_read_hw(struct perf_counter *counter, char __user *buf, size_t count)
 {
-	u64 values[4];
-	int n;
+	u64 read_format = counter->attr.read_format;
+	int ret;
 
 	/*
 	 * Return end-of-file for a read on a counter that is in
@@ -1563,28 +1843,18 @@ perf_read_hw(struct perf_counter *counter, char __user *buf, size_t count)
 	if (counter->state == PERF_COUNTER_STATE_ERROR)
 		return 0;
 
+	if (count < perf_counter_read_size(counter))
+		return -ENOSPC;
+
 	WARN_ON_ONCE(counter->ctx->parent_ctx);
 	mutex_lock(&counter->child_mutex);
-	values[0] = perf_counter_read(counter);
-	n = 1;
-	if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
-		values[n++] = counter->total_time_enabled +
-			atomic64_read(&counter->child_total_time_enabled);
-	if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
-		values[n++] = counter->total_time_running +
-			atomic64_read(&counter->child_total_time_running);
-	if (counter->attr.read_format & PERF_FORMAT_ID)
-		values[n++] = counter->id;
+	if (read_format & PERF_FORMAT_GROUP)
+		ret = perf_counter_read_group(counter, read_format, buf);
+	else
+		ret = perf_counter_read_one(counter, read_format, buf);
 	mutex_unlock(&counter->child_mutex);
 
-	if (count < n * sizeof(u64))
-		return -EINVAL;
-	count = n * sizeof(u64);
-
-	if (copy_to_user(buf, values, count))
-		return -EFAULT;
-
-	return count;
+	return ret;
 }
 
 static ssize_t
@@ -1681,8 +1951,6 @@ static int perf_counter_period(struct perf_counter *counter, u64 __user *arg)
 
 		counter->attr.sample_freq = value;
 	} else {
-		perf_log_period(counter, value);
-
 		counter->attr.sample_period = value;
 		counter->hw.sample_period = value;
 	}
@@ -1751,6 +2019,18 @@ int perf_counter_task_disable(void)
 	return 0;
 }
 
+#ifndef PERF_COUNTER_INDEX_OFFSET
+# define PERF_COUNTER_INDEX_OFFSET 0
+#endif
+
+static int perf_counter_index(struct perf_counter *counter)
+{
+	if (counter->state != PERF_COUNTER_STATE_ACTIVE)
+		return 0;
+
+	return counter->hw.idx + 1 - PERF_COUNTER_INDEX_OFFSET;
+}
+
 /*
  * Callers need to ensure there can be no nesting of this function, otherwise
  * the seqlock logic goes bad. We can not serialize this because the arch
@@ -1775,11 +2055,17 @@ void perf_counter_update_userpage(struct perf_counter *counter)
 	preempt_disable();
 	++userpg->lock;
 	barrier();
-	userpg->index = counter->hw.idx;
+	userpg->index = perf_counter_index(counter);
 	userpg->offset = atomic64_read(&counter->count);
 	if (counter->state == PERF_COUNTER_STATE_ACTIVE)
 		userpg->offset -= atomic64_read(&counter->hw.prev_count);
 
+	userpg->time_enabled = counter->total_time_enabled +
+			atomic64_read(&counter->child_total_time_enabled);
+
+	userpg->time_running = counter->total_time_running +
+			atomic64_read(&counter->child_total_time_running);
+
 	barrier();
 	++userpg->lock;
 	preempt_enable();
@@ -1876,7 +2162,7 @@ fail:
 
 static void perf_mmap_free_page(unsigned long addr)
 {
-	struct page *page = virt_to_page(addr);
+	struct page *page = virt_to_page((void *)addr);
 
 	page->mapping = NULL;
 	__free_page(page);
@@ -2076,7 +2362,7 @@ static void perf_pending_counter(struct perf_pending_entry *entry)
 
 	if (counter->pending_disable) {
 		counter->pending_disable = 0;
-		perf_counter_disable(counter);
+		__perf_counter_disable(counter);
 	}
 
 	if (counter->pending_wakeup) {
@@ -2461,7 +2747,80 @@ static u32 perf_counter_tid(struct perf_counter *counter, struct task_struct *p)
 	return task_pid_nr_ns(p, counter->ns);
 }
 
-static void perf_counter_output(struct perf_counter *counter, int nmi,
+static void perf_output_read_one(struct perf_output_handle *handle,
+				 struct perf_counter *counter)
+{
+	u64 read_format = counter->attr.read_format;
+	u64 values[4];
+	int n = 0;
+
+	values[n++] = atomic64_read(&counter->count);
+	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
+		values[n++] = counter->total_time_enabled +
+			atomic64_read(&counter->child_total_time_enabled);
+	}
+	if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
+		values[n++] = counter->total_time_running +
+			atomic64_read(&counter->child_total_time_running);
+	}
+	if (read_format & PERF_FORMAT_ID)
+		values[n++] = primary_counter_id(counter);
+
+	perf_output_copy(handle, values, n * sizeof(u64));
+}
+
+/*
+ * XXX PERF_FORMAT_GROUP vs inherited counters seems difficult.
+ */
+static void perf_output_read_group(struct perf_output_handle *handle,
+			    struct perf_counter *counter)
+{
+	struct perf_counter *leader = counter->group_leader, *sub;
+	u64 read_format = counter->attr.read_format;
+	u64 values[5];
+	int n = 0;
+
+	values[n++] = 1 + leader->nr_siblings;
+
+	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
+		values[n++] = leader->total_time_enabled;
+
+	if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
+		values[n++] = leader->total_time_running;
+
+	if (leader != counter)
+		leader->pmu->read(leader);
+
+	values[n++] = atomic64_read(&leader->count);
+	if (read_format & PERF_FORMAT_ID)
+		values[n++] = primary_counter_id(leader);
+
+	perf_output_copy(handle, values, n * sizeof(u64));
+
+	list_for_each_entry(sub, &leader->sibling_list, list_entry) {
+		n = 0;
+
+		if (sub != counter)
+			sub->pmu->read(sub);
+
+		values[n++] = atomic64_read(&sub->count);
+		if (read_format & PERF_FORMAT_ID)
+			values[n++] = primary_counter_id(sub);
+
+		perf_output_copy(handle, values, n * sizeof(u64));
+	}
+}
+
+static void perf_output_read(struct perf_output_handle *handle,
+			     struct perf_counter *counter)
+{
+	if (counter->attr.read_format & PERF_FORMAT_GROUP)
+		perf_output_read_group(handle, counter);
+	else
+		perf_output_read_one(handle, counter);
+}
+
+void perf_counter_output(struct perf_counter *counter, int nmi,
 				struct perf_sample_data *data)
 {
 	int ret;
@@ -2472,10 +2831,6 @@ static void perf_counter_output(struct perf_counter *counter, int nmi,
 	struct {
 		u32 pid, tid;
 	} tid_entry;
-	struct {
-		u64 id;
-		u64 counter;
-	} group_entry;
 	struct perf_callchain_entry *callchain = NULL;
 	int callchain_size = 0;
 	u64 time;
@@ -2483,15 +2838,14 @@ static void perf_counter_output(struct perf_counter *counter, int nmi,
 		u32 cpu, reserved;
 	} cpu_entry;
 
-	header.type = 0;
+	header.type = PERF_EVENT_SAMPLE;
 	header.size = sizeof(header);
 
-	header.misc = PERF_EVENT_MISC_OVERFLOW;
+	header.misc = 0;
 	header.misc |= perf_misc_flags(data->regs);
 
 	if (sample_type & PERF_SAMPLE_IP) {
 		ip = perf_instruction_pointer(data->regs);
-		header.type |= PERF_SAMPLE_IP;
 		header.size += sizeof(ip);
 	}
 
@@ -2500,7 +2854,6 @@ static void perf_counter_output(struct perf_counter *counter, int nmi,
 		tid_entry.pid = perf_counter_pid(counter, current);
 		tid_entry.tid = perf_counter_tid(counter, current);
 
-		header.type |= PERF_SAMPLE_TID;
 		header.size += sizeof(tid_entry);
 	}
 
@@ -2510,47 +2863,51 @@ static void perf_counter_output(struct perf_counter *counter, int nmi,
 		 */
 		time = sched_clock();
 
-		header.type |= PERF_SAMPLE_TIME;
 		header.size += sizeof(u64);
 	}
 
-	if (sample_type & PERF_SAMPLE_ADDR) {
-		header.type |= PERF_SAMPLE_ADDR;
+	if (sample_type & PERF_SAMPLE_ADDR)
 		header.size += sizeof(u64);
-	}
 
-	if (sample_type & PERF_SAMPLE_ID) {
-		header.type |= PERF_SAMPLE_ID;
+	if (sample_type & PERF_SAMPLE_ID)
+		header.size += sizeof(u64);
+
+	if (sample_type & PERF_SAMPLE_STREAM_ID)
 		header.size += sizeof(u64);
-	}
 
 	if (sample_type & PERF_SAMPLE_CPU) {
-		header.type |= PERF_SAMPLE_CPU;
 		header.size += sizeof(cpu_entry);
 
 		cpu_entry.cpu = raw_smp_processor_id();
+		cpu_entry.reserved = 0;
 	}
 
-	if (sample_type & PERF_SAMPLE_PERIOD) {
-		header.type |= PERF_SAMPLE_PERIOD;
+	if (sample_type & PERF_SAMPLE_PERIOD)
 		header.size += sizeof(u64);
-	}
 
-	if (sample_type & PERF_SAMPLE_GROUP) {
-		header.type |= PERF_SAMPLE_GROUP;
-		header.size += sizeof(u64) +
-			counter->nr_siblings * sizeof(group_entry);
-	}
+	if (sample_type & PERF_SAMPLE_READ)
+		header.size += perf_counter_read_size(counter);
 
 	if (sample_type & PERF_SAMPLE_CALLCHAIN) {
 		callchain = perf_callchain(data->regs);
 
 		if (callchain) {
 			callchain_size = (1 + callchain->nr) * sizeof(u64);
-
-			header.type |= PERF_SAMPLE_CALLCHAIN;
 			header.size += callchain_size;
-		}
+		} else
+			header.size += sizeof(u64);
+	}
+
+	if (sample_type & PERF_SAMPLE_RAW) {
+		int size = sizeof(u32);
+
+		if (data->raw)
+			size += data->raw->size;
+		else
+			size += sizeof(u32);
+
+		WARN_ON_ONCE(size & (sizeof(u64)-1));
+		header.size += size;
 	}
 
 	ret = perf_output_begin(&handle, counter, header.size, nmi, 1);
@@ -2571,7 +2928,13 @@ static void perf_counter_output(struct perf_counter *counter, int nmi,
 	if (sample_type & PERF_SAMPLE_ADDR)
 		perf_output_put(&handle, data->addr);
 
-	if (sample_type & PERF_SAMPLE_ID)
+	if (sample_type & PERF_SAMPLE_ID) {
+		u64 id = primary_counter_id(counter);
+
+		perf_output_put(&handle, id);
+	}
+
+	if (sample_type & PERF_SAMPLE_STREAM_ID)
 		perf_output_put(&handle, counter->id);
 
 	if (sample_type & PERF_SAMPLE_CPU)
@@ -2580,76 +2943,125 @@ static void perf_counter_output(struct perf_counter *counter, int nmi,
 	if (sample_type & PERF_SAMPLE_PERIOD)
 		perf_output_put(&handle, data->period);
 
-	/*
-	 * XXX PERF_SAMPLE_GROUP vs inherited counters seems difficult.
-	 */
-	if (sample_type & PERF_SAMPLE_GROUP) {
-		struct perf_counter *leader, *sub;
-		u64 nr = counter->nr_siblings;
-
-		perf_output_put(&handle, nr);
+	if (sample_type & PERF_SAMPLE_READ)
+		perf_output_read(&handle, counter);
 
-		leader = counter->group_leader;
-		list_for_each_entry(sub, &leader->sibling_list, list_entry) {
-			if (sub != counter)
-				sub->pmu->read(sub);
-
-			group_entry.id = sub->id;
-			group_entry.counter = atomic64_read(&sub->count);
+	if (sample_type & PERF_SAMPLE_CALLCHAIN) {
+		if (callchain)
+			perf_output_copy(&handle, callchain, callchain_size);
+		else {
+			u64 nr = 0;
+			perf_output_put(&handle, nr);
+		}
+	}
 
-			perf_output_put(&handle, group_entry);
+	if (sample_type & PERF_SAMPLE_RAW) {
+		if (data->raw) {
+			perf_output_put(&handle, data->raw->size);
+			perf_output_copy(&handle, data->raw->data, data->raw->size);
+		} else {
+			struct {
+				u32	size;
+				u32	data;
+			} raw = {
+				.size = sizeof(u32),
+				.data = 0,
+			};
+			perf_output_put(&handle, raw);
 		}
 	}
 
-	if (callchain)
-		perf_output_copy(&handle, callchain, callchain_size);
+	perf_output_end(&handle);
+}
+
+/*
+ * read event
+ */
+
+struct perf_read_event {
+	struct perf_event_header	header;
+
+	u32				pid;
+	u32				tid;
+};
+
+static void
+perf_counter_read_event(struct perf_counter *counter,
+			struct task_struct *task)
+{
+	struct perf_output_handle handle;
+	struct perf_read_event event = {
+		.header = {
+			.type = PERF_EVENT_READ,
+			.misc = 0,
+			.size = sizeof(event) + perf_counter_read_size(counter),
+		},
+		.pid = perf_counter_pid(counter, task),
+		.tid = perf_counter_tid(counter, task),
+	};
+	int ret;
+
+	ret = perf_output_begin(&handle, counter, event.header.size, 0, 0);
+	if (ret)
+		return;
+
+	perf_output_put(&handle, event);
+	perf_output_read(&handle, counter);
 
 	perf_output_end(&handle);
 }
 
 /*
- * fork tracking
+ * task tracking -- fork/exit
+ *
+ * enabled by: attr.comm | attr.mmap | attr.task
  */
 
-struct perf_fork_event {
-	struct task_struct	*task;
+struct perf_task_event {
+	struct task_struct		*task;
+	struct perf_counter_context	*task_ctx;
 
 	struct {
 		struct perf_event_header	header;
 
 		u32				pid;
 		u32				ppid;
+		u32				tid;
+		u32				ptid;
 	} event;
 };
 
-static void perf_counter_fork_output(struct perf_counter *counter,
-				     struct perf_fork_event *fork_event)
+static void perf_counter_task_output(struct perf_counter *counter,
+				     struct perf_task_event *task_event)
 {
 	struct perf_output_handle handle;
-	int size = fork_event->event.header.size;
-	struct task_struct *task = fork_event->task;
+	int size = task_event->event.header.size;
+	struct task_struct *task = task_event->task;
 	int ret = perf_output_begin(&handle, counter, size, 0, 0);
 
 	if (ret)
 		return;
 
-	fork_event->event.pid = perf_counter_pid(counter, task);
-	fork_event->event.ppid = perf_counter_pid(counter, task->real_parent);
+	task_event->event.pid = perf_counter_pid(counter, task);
+	task_event->event.ppid = perf_counter_pid(counter, current);
+
+	task_event->event.tid = perf_counter_tid(counter, task);
+	task_event->event.ptid = perf_counter_tid(counter, current);
 
-	perf_output_put(&handle, fork_event->event);
+	perf_output_put(&handle, task_event->event);
 	perf_output_end(&handle);
 }
 
-static int perf_counter_fork_match(struct perf_counter *counter)
+static int perf_counter_task_match(struct perf_counter *counter)
 {
-	if (counter->attr.comm || counter->attr.mmap)
+	if (counter->attr.comm || counter->attr.mmap || counter->attr.task)
 		return 1;
 
 	return 0;
 }
 
-static void perf_counter_fork_ctx(struct perf_counter_context *ctx,
-				  struct perf_fork_event *fork_event)
+static void perf_counter_task_ctx(struct perf_counter_context *ctx,
+				  struct perf_task_event *task_event)
 {
 	struct perf_counter *counter;
 
@@ -2658,51 +3070,62 @@ static void perf_counter_fork_ctx(struct perf_counter_context *ctx,
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(counter, &ctx->event_list, event_entry) {
-		if (perf_counter_fork_match(counter))
-			perf_counter_fork_output(counter, fork_event);
+		if (perf_counter_task_match(counter))
+			perf_counter_task_output(counter, task_event);
 	}
 	rcu_read_unlock();
 }
 
-static void perf_counter_fork_event(struct perf_fork_event *fork_event)
+static void perf_counter_task_event(struct perf_task_event *task_event)
 {
 	struct perf_cpu_context *cpuctx;
-	struct perf_counter_context *ctx;
+	struct perf_counter_context *ctx = task_event->task_ctx;
 
 	cpuctx = &get_cpu_var(perf_cpu_context);
-	perf_counter_fork_ctx(&cpuctx->ctx, fork_event);
+	perf_counter_task_ctx(&cpuctx->ctx, task_event);
 	put_cpu_var(perf_cpu_context);
 
 	rcu_read_lock();
-	/*
-	 * doesn't really matter which of the child contexts the
-	 * events ends up in.
-	 */
-	ctx = rcu_dereference(current->perf_counter_ctxp);
+	if (!ctx)
+		ctx = rcu_dereference(task_event->task->perf_counter_ctxp);
 	if (ctx)
-		perf_counter_fork_ctx(ctx, fork_event);
+		perf_counter_task_ctx(ctx, task_event);
 	rcu_read_unlock();
 }
 
-void perf_counter_fork(struct task_struct *task)
+static void perf_counter_task(struct task_struct *task,
+			      struct perf_counter_context *task_ctx,
+			      int new)
 {
-	struct perf_fork_event fork_event;
+	struct perf_task_event task_event;
 
 	if (!atomic_read(&nr_comm_counters) &&
-	    !atomic_read(&nr_mmap_counters))
+	    !atomic_read(&nr_mmap_counters) &&
+	    !atomic_read(&nr_task_counters))
 		return;
 
-	fork_event = (struct perf_fork_event){
-		.task	= task,
-		.event  = {
+	task_event = (struct perf_task_event){
+		.task	  = task,
+		.task_ctx = task_ctx,
+		.event    = {
 			.header = {
-				.type = PERF_EVENT_FORK,
-				.size = sizeof(fork_event.event),
+				.type = new ? PERF_EVENT_FORK : PERF_EVENT_EXIT,
+				.misc = 0,
+				.size = sizeof(task_event.event),
 			},
+			/* .pid  */
+			/* .ppid */
+			/* .tid  */
+			/* .ptid */
 		},
 	};
 
-	perf_counter_fork_event(&fork_event);
+	perf_counter_task_event(&task_event);
+}
+
+void perf_counter_fork(struct task_struct *task)
+{
+	perf_counter_task(task, NULL, 1);
 }
 
 /*
@@ -2770,8 +3193,10 @@ static void perf_counter_comm_event(struct perf_comm_event *comm_event)
 	struct perf_cpu_context *cpuctx;
 	struct perf_counter_context *ctx;
 	unsigned int size;
-	char *comm = comm_event->task->comm;
+	char comm[TASK_COMM_LEN];
 
+	memset(comm, 0, sizeof(comm));
+	strncpy(comm, comm_event->task->comm, sizeof(comm));
 	size = ALIGN(strlen(comm)+1, sizeof(u64));
 
 	comm_event->comm = comm;
@@ -2798,13 +3223,24 @@ void perf_counter_comm(struct task_struct *task)
 {
 	struct perf_comm_event comm_event;
 
+	if (task->perf_counter_ctxp)
+		perf_counter_enable_on_exec(task);
+
 	if (!atomic_read(&nr_comm_counters))
 		return;
 
 	comm_event = (struct perf_comm_event){
 		.task	= task,
+		/* .comm      */
+		/* .comm_size */
 		.event  = {
-			.header = { .type = PERF_EVENT_COMM, },
+			.header = {
+				.type = PERF_EVENT_COMM,
+				.misc = 0,
+				/* .size */
+			},
+			/* .pid */
+			/* .tid */
 		},
 	};
 
@@ -2887,8 +3323,15 @@ static void perf_counter_mmap_event(struct perf_mmap_event *mmap_event)
 	char *buf = NULL;
 	const char *name;
 
+	memset(tmp, 0, sizeof(tmp));
+
 	if (file) {
-		buf = kzalloc(PATH_MAX, GFP_KERNEL);
+		/*
+		 * d_path works from the end of the buffer backwards, so we
+		 * need to add enough zero bytes after the string to handle
+		 * the 64bit alignment we do later.
+		 */
+		buf = kzalloc(PATH_MAX + sizeof(u64), GFP_KERNEL);
 		if (!buf) {
 			name = strncpy(tmp, "//enomem", sizeof(tmp));
 			goto got_name;
@@ -2899,9 +3342,11 @@ static void perf_counter_mmap_event(struct perf_mmap_event *mmap_event)
 			goto got_name;
 		}
 	} else {
-		name = arch_vma_name(mmap_event->vma);
-		if (name)
+		if (arch_vma_name(mmap_event->vma)) {
+			name = strncpy(tmp, arch_vma_name(mmap_event->vma),
+				       sizeof(tmp));
 			goto got_name;
+		}
 
 		if (!vma->vm_mm) {
 			name = strncpy(tmp, "[vdso]", sizeof(tmp));
@@ -2946,8 +3391,16 @@ void __perf_counter_mmap(struct vm_area_struct *vma)
 
 	mmap_event = (struct perf_mmap_event){
 		.vma	= vma,
+		/* .file_name */
+		/* .file_size */
 		.event  = {
-			.header = { .type = PERF_EVENT_MMAP, },
+			.header = {
+				.type = PERF_EVENT_MMAP,
+				.misc = 0,
+				/* .size */
+			},
+			/* .pid */
+			/* .tid */
 			.start  = vma->vm_start,
 			.len    = vma->vm_end - vma->vm_start,
 			.pgoff  = vma->vm_pgoff,
@@ -2958,49 +3411,6 @@ void __perf_counter_mmap(struct vm_area_struct *vma)
 }
 
 /*
- * Log sample_period changes so that analyzing tools can re-normalize the
- * event flow.
- */
-
-struct freq_event {
-	struct perf_event_header	header;
-	u64				time;
-	u64				id;
-	u64				period;
-};
-
-static void perf_log_period(struct perf_counter *counter, u64 period)
-{
-	struct perf_output_handle handle;
-	struct freq_event event;
-	int ret;
-
-	if (counter->hw.sample_period == period)
-		return;
-
-	if (counter->attr.sample_type & PERF_SAMPLE_PERIOD)
-		return;
-
-	event = (struct freq_event) {
-		.header = {
-			.type = PERF_EVENT_PERIOD,
-			.misc = 0,
-			.size = sizeof(event),
-		},
-		.time = sched_clock(),
-		.id = counter->id,
-		.period = period,
-	};
-
-	ret = perf_output_begin(&handle, counter, sizeof(event), 1, 0);
-	if (ret)
-		return;
-
-	perf_output_put(&handle, event);
-	perf_output_end(&handle);
-}
-
-/*
  * IRQ throttle logging
  */
 
@@ -3013,16 +3423,21 @@ static void perf_log_throttle(struct perf_counter *counter, int enable)
 		struct perf_event_header	header;
 		u64				time;
 		u64				id;
+		u64				stream_id;
 	} throttle_event = {
 		.header = {
-			.type = PERF_EVENT_THROTTLE + 1,
+			.type = PERF_EVENT_THROTTLE,
 			.misc = 0,
 			.size = sizeof(throttle_event),
 		},
-		.time	= sched_clock(),
-		.id	= counter->id,
+		.time		= sched_clock(),
+		.id		= primary_counter_id(counter),
+		.stream_id	= counter->id,
 	};
 
+	if (enable)
+		throttle_event.header.type = PERF_EVENT_UNTHROTTLE;
+
 	ret = perf_output_begin(&handle, counter, sizeof(throttle_event), 1, 0);
 	if (ret)
 		return;
@@ -3099,125 +3514,111 @@ int perf_counter_overflow(struct perf_counter *counter, int nmi,
  * Generic software counter infrastructure
  */
 
-static void perf_swcounter_update(struct perf_counter *counter)
+/*
+ * We directly increment counter->count and keep a second value in
+ * counter->hw.period_left to count intervals. This period counter
+ * is kept in the range [-sample_period, 0] so that we can use the
+ * sign as trigger.
+ */
+
+static u64 perf_swcounter_set_period(struct perf_counter *counter)
 {
 	struct hw_perf_counter *hwc = &counter->hw;
-	u64 prev, now;
-	s64 delta;
+	u64 period = hwc->last_period;
+	u64 nr, offset;
+	s64 old, val;
+
+	hwc->last_period = hwc->sample_period;
 
 again:
-	prev = atomic64_read(&hwc->prev_count);
-	now = atomic64_read(&hwc->count);
-	if (atomic64_cmpxchg(&hwc->prev_count, prev, now) != prev)
-		goto again;
+	old = val = atomic64_read(&hwc->period_left);
+	if (val < 0)
+		return 0;
 
-	delta = now - prev;
+	nr = div64_u64(period + val, period);
+	offset = nr * period;
+	val -= offset;
+	if (atomic64_cmpxchg(&hwc->period_left, old, val) != old)
+		goto again;
 
-	atomic64_add(delta, &counter->count);
-	atomic64_sub(delta, &hwc->period_left);
+	return nr;
 }
 
-static void perf_swcounter_set_period(struct perf_counter *counter)
+static void perf_swcounter_overflow(struct perf_counter *counter,
+				    int nmi, struct perf_sample_data *data)
 {
 	struct hw_perf_counter *hwc = &counter->hw;
-	s64 left = atomic64_read(&hwc->period_left);
-	s64 period = hwc->sample_period;
+	u64 overflow;
 
-	if (unlikely(left <= -period)) {
-		left = period;
-		atomic64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-	}
+	data->period = counter->hw.last_period;
+	overflow = perf_swcounter_set_period(counter);
 
-	if (unlikely(left <= 0)) {
-		left += period;
-		atomic64_add(period, &hwc->period_left);
-		hwc->last_period = period;
-	}
+	if (hwc->interrupts == MAX_INTERRUPTS)
+		return;
 
-	atomic64_set(&hwc->prev_count, -left);
-	atomic64_set(&hwc->count, -left);
+	for (; overflow; overflow--) {
+		if (perf_counter_overflow(counter, nmi, data)) {
+			/*
+			 * We inhibit the overflow from happening when
+			 * hwc->interrupts == MAX_INTERRUPTS.
+			 */
+			break;
+		}
+	}
 }
 
-static enum hrtimer_restart perf_swcounter_hrtimer(struct hrtimer *hrtimer)
+static void perf_swcounter_unthrottle(struct perf_counter *counter)
 {
-	enum hrtimer_restart ret = HRTIMER_RESTART;
-	struct perf_sample_data data;
-	struct perf_counter *counter;
-	u64 period;
-
-	counter	= container_of(hrtimer, struct perf_counter, hw.hrtimer);
-	counter->pmu->read(counter);
-
-	data.addr = 0;
-	data.regs = get_irq_regs();
 	/*
-	 * In case we exclude kernel IPs or are somehow not in interrupt
-	 * context, provide the next best thing, the user IP.
+	 * Nothing to do, we already reset hwc->interrupts.
 	 */
-	if ((counter->attr.exclude_kernel || !data.regs) &&
-			!counter->attr.exclude_user)
-		data.regs = task_pt_regs(current);
+}
 
-	if (data.regs) {
-		if (perf_counter_overflow(counter, 0, &data))
-			ret = HRTIMER_NORESTART;
-	}
+static void perf_swcounter_add(struct perf_counter *counter, u64 nr,
+			       int nmi, struct perf_sample_data *data)
+{
+	struct hw_perf_counter *hwc = &counter->hw;
 
-	period = max_t(u64, 10000, counter->hw.sample_period);
-	hrtimer_forward_now(hrtimer, ns_to_ktime(period));
+	atomic64_add(nr, &counter->count);
 
-	return ret;
-}
+	if (!hwc->sample_period)
+		return;
 
-static void perf_swcounter_overflow(struct perf_counter *counter,
-				    int nmi, struct perf_sample_data *data)
-{
-	data->period = counter->hw.last_period;
+	if (!data->regs)
+		return;
 
-	perf_swcounter_update(counter);
-	perf_swcounter_set_period(counter);
-	if (perf_counter_overflow(counter, nmi, data))
-		/* soft-disable the counter */
-		;
+	if (!atomic64_add_negative(nr, &hwc->period_left))
+		perf_swcounter_overflow(counter, nmi, data);
 }
 
 static int perf_swcounter_is_counting(struct perf_counter *counter)
 {
-	struct perf_counter_context *ctx;
-	unsigned long flags;
-	int count;
-
+	/*
+	 * The counter is active, we're good!
+	 */
 	if (counter->state == PERF_COUNTER_STATE_ACTIVE)
 		return 1;
 
+	/*
+	 * The counter is off/error, not counting.
+	 */
 	if (counter->state != PERF_COUNTER_STATE_INACTIVE)
 		return 0;
 
 	/*
-	 * If the counter is inactive, it could be just because
-	 * its task is scheduled out, or because it's in a group
-	 * which could not go on the PMU.  We want to count in
-	 * the first case but not the second.  If the context is
-	 * currently active then an inactive software counter must
-	 * be the second case.  If it's not currently active then
-	 * we need to know whether the counter was active when the
-	 * context was last active, which we can determine by
-	 * comparing counter->tstamp_stopped with ctx->time.
-	 *
-	 * We are within an RCU read-side critical section,
-	 * which protects the existence of *ctx.
+	 * The counter is inactive, if the context is active
+	 * we're part of a group that didn't make it on the 'pmu',
+	 * not counting.
 	 */
-	ctx = counter->ctx;
-	spin_lock_irqsave(&ctx->lock, flags);
-	count = 1;
-	/* Re-check state now we have the lock */
-	if (counter->state < PERF_COUNTER_STATE_INACTIVE ||
-	    counter->ctx->is_active ||
-	    counter->tstamp_stopped < ctx->time)
-		count = 0;
-	spin_unlock_irqrestore(&ctx->lock, flags);
-	return count;
+	if (counter->ctx->is_active)
+		return 0;
+
+	/*
+	 * We're inactive and the context is too, this means the
+	 * task is scheduled out, we're counting events that happen
+	 * to us, like migration events.
+	 */
+	return 1;
 }
 
 static int perf_swcounter_match(struct perf_counter *counter,
@@ -3243,15 +3644,6 @@ static int perf_swcounter_match(struct perf_counter *counter,
 	return 1;
 }
 
-static void perf_swcounter_add(struct perf_counter *counter, u64 nr,
-			       int nmi, struct perf_sample_data *data)
-{
-	int neg = atomic64_add_negative(nr, &counter->hw.count);
-
-	if (counter->hw.sample_period && !neg && data->regs)
-		perf_swcounter_overflow(counter, nmi, data);
-}
-
 static void perf_swcounter_ctx_event(struct perf_counter_context *ctx,
 				     enum perf_type_id type,
 				     u32 event, u64 nr, int nmi,
@@ -3317,8 +3709,8 @@ out:
 	put_cpu_var(perf_cpu_context);
 }
 
-void
-perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
+void __perf_swcounter_event(u32 event, u64 nr, int nmi,
+			    struct pt_regs *regs, u64 addr)
 {
 	struct perf_sample_data data = {
 		.regs = regs,
@@ -3330,27 +3722,66 @@ perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
 
 static void perf_swcounter_read(struct perf_counter *counter)
 {
-	perf_swcounter_update(counter);
 }
 
 static int perf_swcounter_enable(struct perf_counter *counter)
 {
-	perf_swcounter_set_period(counter);
+	struct hw_perf_counter *hwc = &counter->hw;
+
+	if (hwc->sample_period) {
+		hwc->last_period = hwc->sample_period;
+		perf_swcounter_set_period(counter);
+	}
 	return 0;
 }
 
 static void perf_swcounter_disable(struct perf_counter *counter)
 {
-	perf_swcounter_update(counter);
 }
 
 static const struct pmu perf_ops_generic = {
 	.enable		= perf_swcounter_enable,
 	.disable	= perf_swcounter_disable,
 	.read		= perf_swcounter_read,
+	.unthrottle	= perf_swcounter_unthrottle,
 };
 
 /*
+ * hrtimer based swcounter callback
+ */
+
+static enum hrtimer_restart perf_swcounter_hrtimer(struct hrtimer *hrtimer)
+{
+	enum hrtimer_restart ret = HRTIMER_RESTART;
+	struct perf_sample_data data;
+	struct perf_counter *counter;
+	u64 period;
+
+	counter	= container_of(hrtimer, struct perf_counter, hw.hrtimer);
+	counter->pmu->read(counter);
+
+	data.addr = 0;
+	data.regs = get_irq_regs();
+	/*
+	 * In case we exclude kernel IPs or are somehow not in interrupt
+	 * context, provide the next best thing, the user IP.
+	 */
+	if ((counter->attr.exclude_kernel || !data.regs) &&
+			!counter->attr.exclude_user)
+		data.regs = task_pt_regs(current);
+
+	if (data.regs) {
+		if (perf_counter_overflow(counter, 0, &data))
+			ret = HRTIMER_NORESTART;
+	}
+
+	period = max_t(u64, 10000, counter->hw.sample_period);
+	hrtimer_forward_now(hrtimer, ns_to_ktime(period));
+
+	return ret;
+}
+
+/*
  * Software counter: cpu wall time clock
  */
 
@@ -3467,17 +3898,24 @@ static const struct pmu perf_ops_task_clock = {
 };
 
 #ifdef CONFIG_EVENT_PROFILE
-void perf_tpcounter_event(int event_id)
+void perf_tpcounter_event(int event_id, u64 addr, u64 count, void *record,
+			  int entry_size)
 {
+	struct perf_raw_record raw = {
+		.size = entry_size,
+		.data = record,
+	};
+
 	struct perf_sample_data data = {
-		.regs = get_irq_regs();
-		.addr = 0,
+		.regs = get_irq_regs(),
+		.addr = addr,
+		.raw = &raw,
 	};
 
 	if (!data.regs)
 		data.regs = task_pt_regs(current);
 
-	do_perf_swcounter_event(PERF_TYPE_TRACEPOINT, event_id, 1, 1, &data);
+	do_perf_swcounter_event(PERF_TYPE_TRACEPOINT, event_id, count, 1, &data);
 }
 EXPORT_SYMBOL_GPL(perf_tpcounter_event);
 
@@ -3486,16 +3924,20 @@ extern void ftrace_profile_disable(int);
 
 static void tp_perf_counter_destroy(struct perf_counter *counter)
 {
-	ftrace_profile_disable(perf_event_id(&counter->attr));
+	ftrace_profile_disable(counter->attr.config);
 }
 
 static const struct pmu *tp_perf_counter_init(struct perf_counter *counter)
 {
-	int event_id = perf_event_id(&counter->attr);
-	int ret;
+	/*
+	 * Raw tracepoint data is a severe data leak, only allow root to
+	 * have these.
+	 */
+	if ((counter->attr.sample_type & PERF_SAMPLE_RAW) &&
+			!capable(CAP_SYS_ADMIN))
+		return ERR_PTR(-EPERM);
 
-	ret = ftrace_profile_enable(event_id);
-	if (ret)
+	if (ftrace_profile_enable(counter->attr.config))
 		return NULL;
 
 	counter->destroy = tp_perf_counter_destroy;
@@ -3509,9 +3951,21 @@ static const struct pmu *tp_perf_counter_init(struct perf_counter *counter)
 }
 #endif
 
+atomic_t perf_swcounter_enabled[PERF_COUNT_SW_MAX];
+
+static void sw_perf_counter_destroy(struct perf_counter *counter)
+{
+	u64 event = counter->attr.config;
+
+	WARN_ON(counter->parent);
+
+	atomic_dec(&perf_swcounter_enabled[event]);
+}
+
 static const struct pmu *sw_perf_counter_init(struct perf_counter *counter)
 {
 	const struct pmu *pmu = NULL;
+	u64 event = counter->attr.config;
 
 	/*
 	 * Software counters (currently) can't in general distinguish
@@ -3520,7 +3974,7 @@ static const struct pmu *sw_perf_counter_init(struct perf_counter *counter)
 	 * to be kernel events, and page faults are never hypervisor
 	 * events.
 	 */
-	switch (counter->attr.config) {
+	switch (event) {
 	case PERF_COUNT_SW_CPU_CLOCK:
 		pmu = &perf_ops_cpu_clock;
 
@@ -3541,6 +3995,10 @@ static const struct pmu *sw_perf_counter_init(struct perf_counter *counter)
 	case PERF_COUNT_SW_PAGE_FAULTS_MAJ:
 	case PERF_COUNT_SW_CONTEXT_SWITCHES:
 	case PERF_COUNT_SW_CPU_MIGRATIONS:
+		if (!counter->parent) {
+			atomic_inc(&perf_swcounter_enabled[event]);
+			counter->destroy = sw_perf_counter_destroy;
+		}
 		pmu = &perf_ops_generic;
 		break;
 	}
@@ -3556,6 +4014,7 @@ perf_counter_alloc(struct perf_counter_attr *attr,
 		   int cpu,
 		   struct perf_counter_context *ctx,
 		   struct perf_counter *group_leader,
+		   struct perf_counter *parent_counter,
 		   gfp_t gfpflags)
 {
 	const struct pmu *pmu;
@@ -3591,6 +4050,8 @@ perf_counter_alloc(struct perf_counter_attr *attr,
 	counter->ctx		= ctx;
 	counter->oncpu		= -1;
 
+	counter->parent		= parent_counter;
+
 	counter->ns		= get_pid_ns(current->nsproxy->pid_ns);
 	counter->id		= atomic64_inc_return(&perf_counter_id);
 
@@ -3605,13 +4066,14 @@ perf_counter_alloc(struct perf_counter_attr *attr,
 	hwc->sample_period = attr->sample_period;
 	if (attr->freq && attr->sample_freq)
 		hwc->sample_period = 1;
+	hwc->last_period = hwc->sample_period;
 
 	atomic64_set(&hwc->period_left, hwc->sample_period);
 
 	/*
-	 * we currently do not support PERF_SAMPLE_GROUP on inherited counters
+	 * we currently do not support PERF_FORMAT_GROUP on inherited counters
 	 */
-	if (attr->inherit && (attr->sample_type & PERF_SAMPLE_GROUP))
+	if (attr->inherit && (attr->read_format & PERF_FORMAT_GROUP))
 		goto done;
 
 	switch (attr->type) {
@@ -3648,11 +4110,15 @@ done:
 
 	counter->pmu = pmu;
 
-	atomic_inc(&nr_counters);
-	if (counter->attr.mmap)
-		atomic_inc(&nr_mmap_counters);
-	if (counter->attr.comm)
-		atomic_inc(&nr_comm_counters);
+	if (!counter->parent) {
+		atomic_inc(&nr_counters);
+		if (counter->attr.mmap)
+			atomic_inc(&nr_mmap_counters);
+		if (counter->attr.comm)
+			atomic_inc(&nr_comm_counters);
+		if (counter->attr.task)
+			atomic_inc(&nr_task_counters);
+	}
 
 	return counter;
 }
@@ -3815,7 +4281,7 @@ SYSCALL_DEFINE5(perf_counter_open,
 	}
 
 	counter = perf_counter_alloc(&attr, cpu, ctx, group_leader,
-				     GFP_KERNEL);
+				     NULL, GFP_KERNEL);
 	ret = PTR_ERR(counter);
 	if (IS_ERR(counter))
 		goto err_put_context;
@@ -3881,7 +4347,8 @@ inherit_counter(struct perf_counter *parent_counter,
 
 	child_counter = perf_counter_alloc(&parent_counter->attr,
 					   parent_counter->cpu, child_ctx,
-					   group_leader, GFP_KERNEL);
+					   group_leader, parent_counter,
+					   GFP_KERNEL);
 	if (IS_ERR(child_counter))
 		return child_counter;
 	get_ctx(child_ctx);
@@ -3904,12 +4371,6 @@ inherit_counter(struct perf_counter *parent_counter,
 	 */
 	add_counter_to_ctx(child_counter, child_ctx);
 
-	child_counter->parent = parent_counter;
-	/*
-	 * inherit into child's child as well:
-	 */
-	child_counter->attr.inherit = 1;
-
 	/*
 	 * Get a reference to the parent filp - we will fput it
 	 * when the child counter exits. This is safe to do because
@@ -3953,10 +4414,14 @@ static int inherit_group(struct perf_counter *parent_counter,
 }
 
 static void sync_child_counter(struct perf_counter *child_counter,
-			       struct perf_counter *parent_counter)
+			       struct task_struct *child)
 {
+	struct perf_counter *parent_counter = child_counter->parent;
 	u64 child_val;
 
+	if (child_counter->attr.inherit_stat)
+		perf_counter_read_event(child_counter, child);
+
 	child_val = atomic64_read(&child_counter->count);
 
 	/*
@@ -3985,7 +4450,8 @@ static void sync_child_counter(struct perf_counter *child_counter,
 
 static void
 __perf_counter_exit_task(struct perf_counter *child_counter,
-			 struct perf_counter_context *child_ctx)
+			 struct perf_counter_context *child_ctx,
+			 struct task_struct *child)
 {
 	struct perf_counter *parent_counter;
 
@@ -3999,7 +4465,7 @@ __perf_counter_exit_task(struct perf_counter *child_counter,
 	 * counters need to be zapped - but otherwise linger.
 	 */
 	if (parent_counter) {
-		sync_child_counter(child_counter, parent_counter);
+		sync_child_counter(child_counter, child);
 		free_counter(child_counter);
 	}
 }
@@ -4013,8 +4479,10 @@ void perf_counter_exit_task(struct task_struct *child)
 	struct perf_counter_context *child_ctx;
 	unsigned long flags;
 
-	if (likely(!child->perf_counter_ctxp))
+	if (likely(!child->perf_counter_ctxp)) {
+		perf_counter_task(child, NULL, 0);
 		return;
+	}
 
 	local_irq_save(flags);
 	/*
@@ -4033,17 +4501,20 @@ void perf_counter_exit_task(struct task_struct *child)
 	 */
 	spin_lock(&child_ctx->lock);
 	child->perf_counter_ctxp = NULL;
-	if (child_ctx->parent_ctx) {
-		/*
-		 * This context is a clone; unclone it so it can't get
-		 * swapped to another process while we're removing all
-		 * the counters from it.
-		 */
-		put_ctx(child_ctx->parent_ctx);
-		child_ctx->parent_ctx = NULL;
-	}
-	spin_unlock(&child_ctx->lock);
-	local_irq_restore(flags);
+	/*
+	 * If this context is a clone; unclone it so it can't get
+	 * swapped to another process while we're removing all
+	 * the counters from it.
+	 */
+	unclone_ctx(child_ctx);
+	spin_unlock_irqrestore(&child_ctx->lock, flags);
+
+	/*
+	 * Report the task dead after unscheduling the counters so that we
+	 * won't get any samples after PERF_EVENT_EXIT. We can however still
+	 * get a few PERF_EVENT_READ events.
+	 */
+	perf_counter_task(child, child_ctx, 0);
 
 	/*
 	 * We can recurse on the same lock type through:
@@ -4061,7 +4532,7 @@ void perf_counter_exit_task(struct task_struct *child)
 again:
 	list_for_each_entry_safe(child_counter, tmp, &child_ctx->counter_list,
 				 list_entry)
-		__perf_counter_exit_task(child_counter, child_ctx);
+		__perf_counter_exit_task(child_counter, child_ctx, child);
 
 	/*
 	 * If the last counter was a group counter, it will have appended all
@@ -4264,6 +4735,11 @@ perf_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu)
 		perf_counter_init_cpu(cpu);
 		break;
 
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+		hw_perf_counter_setup_online(cpu);
+		break;
+
 	case CPU_DOWN_PREPARE:
 	case CPU_DOWN_PREPARE_FROZEN:
 		perf_counter_exit_cpu(cpu);
@@ -4288,6 +4764,8 @@ void __init perf_counter_init(void)
 {
 	perf_cpu_notify(&perf_cpu_nb, (unsigned long)CPU_UP_PREPARE,
 			(void *)(long)smp_processor_id());
+	perf_cpu_notify(&perf_cpu_nb, (unsigned long)CPU_ONLINE,
+			(void *)(long)smp_processor_id());
 	register_cpu_notifier(&perf_cpu_nb);
 }
 
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index bece7c0b67b..e33a21cb940 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -521,11 +521,12 @@ void posix_cpu_timers_exit(struct task_struct *tsk)
 }
 void posix_cpu_timers_exit_group(struct task_struct *tsk)
 {
-	struct task_cputime cputime;
+	struct signal_struct *const sig = tsk->signal;
 
-	thread_group_cputimer(tsk, &cputime);
 	cleanup_timers(tsk->signal->cpu_timers,
-		       cputime.utime, cputime.stime, cputime.sum_exec_runtime);
+		       cputime_add(tsk->utime, sig->utime),
+		       cputime_add(tsk->stime, sig->stime),
+		       tsk->se.sum_exec_runtime + sig->sum_sched_runtime);
 }
 
 static void clear_dead_task(struct k_itimer *timer, union cpu_time_count now)
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 052ec4d195c..d089d052c4a 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -202,6 +202,12 @@ static int no_timer_create(struct k_itimer *new_timer)
 	return -EOPNOTSUPP;
 }
 
+static int no_nsleep(const clockid_t which_clock, int flags,
+		     struct timespec *tsave, struct timespec __user *rmtp)
+{
+	return -EOPNOTSUPP;
+}
+
 /*
  * Return nonzero if we know a priori this clockid_t value is bogus.
  */
@@ -254,6 +260,7 @@ static __init int init_posix_timers(void)
 		.clock_get = posix_get_monotonic_raw,
 		.clock_set = do_posix_clock_nosettime,
 		.timer_create = no_timer_create,
+		.nsleep = no_nsleep,
 	};
 
 	register_posix_clock(CLOCK_REALTIME, &clock_realtime);
diff --git a/kernel/power/user.c b/kernel/power/user.c
index ed97375daae..bf0014d6a5f 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -23,7 +23,6 @@
 #include <linux/console.h>
 #include <linux/cpu.h>
 #include <linux/freezer.h>
-#include <linux/smp_lock.h>
 #include <scsi/scsi_scan.h>
 
 #include <asm/uaccess.h>
diff --git a/kernel/profile.c b/kernel/profile.c
index 69911b5745e..419250ebec4 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -117,11 +117,12 @@ int __ref profile_init(void)
 
 	cpumask_copy(prof_cpu_mask, cpu_possible_mask);
 
-	prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL);
+	prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL|__GFP_NOWARN);
 	if (prof_buffer)
 		return 0;
 
-	prof_buffer = alloc_pages_exact(buffer_bytes, GFP_KERNEL|__GFP_ZERO);
+	prof_buffer = alloc_pages_exact(buffer_bytes,
+					GFP_KERNEL|__GFP_ZERO|__GFP_NOWARN);
 	if (prof_buffer)
 		return 0;
 
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 61c78b2c07b..082c320e4db 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -181,8 +181,8 @@ int ptrace_attach(struct task_struct *task)
 	 * interference; SUID, SGID and LSM creds get determined differently
 	 * under ptrace.
 	 */
-	retval = mutex_lock_interruptible(&task->cred_guard_mutex);
-	if (retval < 0)
+	retval = -ERESTARTNOINTR;
+	if (mutex_lock_interruptible(&task->cred_guard_mutex))
 		goto out;
 
 	task_lock(task);
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 0dccfbba6d2..7717b95c202 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -1533,7 +1533,7 @@ void __init __rcu_init(void)
 	int j;
 	struct rcu_node *rnp;
 
-	printk(KERN_WARNING "Experimental hierarchical RCU implementation.\n");
+	printk(KERN_INFO "Hierarchical RCU implementation.\n");
 #ifdef CONFIG_RCU_CPU_STALL_DETECTOR
 	printk(KERN_INFO "RCU-based detection of stalled CPUs is enabled.\n");
 #endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
@@ -1546,7 +1546,6 @@ void __init __rcu_init(void)
 		rcu_cpu_notify(&rcu_nb, CPU_UP_PREPARE, (void *)(long)i);
 	/* Register notifier for non-boot CPUs */
 	register_cpu_notifier(&rcu_nb);
-	printk(KERN_WARNING "Experimental hierarchical RCU init done.\n");
 }
 
 module_param(blimit, int, 0);
diff --git a/kernel/resource.c b/kernel/resource.c
index ac5f3a36923..78b087221c1 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -787,7 +787,7 @@ static int __init reserve_setup(char *str)
 	static struct resource reserve[MAXRESERVE];
 
 	for (;;) {
-		int io_start, io_num;
+		unsigned int io_start, io_num;
 		int x = reserved;
 
 		if (get_option (&str, &io_start) != 2)
diff --git a/kernel/rtmutex.c b/kernel/rtmutex.c
index fcd107a78c5..29bd4baf9e7 100644
--- a/kernel/rtmutex.c
+++ b/kernel/rtmutex.c
@@ -1039,16 +1039,14 @@ int rt_mutex_start_proxy_lock(struct rt_mutex *lock,
 	if (!rt_mutex_owner(lock) || try_to_steal_lock(lock, task)) {
 		/* We got the lock for task. */
 		debug_rt_mutex_lock(lock);
-
 		rt_mutex_set_owner(lock, task, 0);
-
+		spin_unlock(&lock->wait_lock);
 		rt_mutex_deadlock_account_lock(lock, task);
 		return 1;
 	}
 
 	ret = task_blocks_on_rt_mutex(lock, waiter, task, detect_deadlock);
 
-
 	if (ret && !waiter->task) {
 		/*
 		 * Reset the return value. We might have
diff --git a/kernel/sched.c b/kernel/sched.c
index 7c9098d186e..1b59e265273 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -493,6 +493,7 @@ struct rt_rq {
 #endif
 #ifdef CONFIG_SMP
 	unsigned long rt_nr_migratory;
+	unsigned long rt_nr_total;
 	int overloaded;
 	struct plist_head pushable_tasks;
 #endif
@@ -2571,15 +2572,37 @@ static void __sched_fork(struct task_struct *p)
 	p->se.avg_wakeup		= sysctl_sched_wakeup_granularity;
 
 #ifdef CONFIG_SCHEDSTATS
-	p->se.wait_start		= 0;
-	p->se.sum_sleep_runtime		= 0;
-	p->se.sleep_start		= 0;
-	p->se.block_start		= 0;
-	p->se.sleep_max			= 0;
-	p->se.block_max			= 0;
-	p->se.exec_max			= 0;
-	p->se.slice_max			= 0;
-	p->se.wait_max			= 0;
+	p->se.wait_start			= 0;
+	p->se.wait_max				= 0;
+	p->se.wait_count			= 0;
+	p->se.wait_sum				= 0;
+
+	p->se.sleep_start			= 0;
+	p->se.sleep_max				= 0;
+	p->se.sum_sleep_runtime			= 0;
+
+	p->se.block_start			= 0;
+	p->se.block_max				= 0;
+	p->se.exec_max				= 0;
+	p->se.slice_max				= 0;
+
+	p->se.nr_migrations_cold		= 0;
+	p->se.nr_failed_migrations_affine	= 0;
+	p->se.nr_failed_migrations_running	= 0;
+	p->se.nr_failed_migrations_hot		= 0;
+	p->se.nr_forced_migrations		= 0;
+	p->se.nr_forced2_migrations		= 0;
+
+	p->se.nr_wakeups			= 0;
+	p->se.nr_wakeups_sync			= 0;
+	p->se.nr_wakeups_migrate		= 0;
+	p->se.nr_wakeups_local			= 0;
+	p->se.nr_wakeups_remote			= 0;
+	p->se.nr_wakeups_affine			= 0;
+	p->se.nr_wakeups_affine_attempts	= 0;
+	p->se.nr_wakeups_passive		= 0;
+	p->se.nr_wakeups_idle			= 0;
+
 #endif
 
 	INIT_LIST_HEAD(&p->rt.run_list);
@@ -6541,6 +6564,11 @@ SYSCALL_DEFINE0(sched_yield)
 	return 0;
 }
 
+static inline int should_resched(void)
+{
+	return need_resched() && !(preempt_count() & PREEMPT_ACTIVE);
+}
+
 static void __cond_resched(void)
 {
 #ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
@@ -6560,8 +6588,7 @@ static void __cond_resched(void)
 
 int __sched _cond_resched(void)
 {
-	if (need_resched() && !(preempt_count() & PREEMPT_ACTIVE) &&
-					system_state == SYSTEM_RUNNING) {
+	if (should_resched()) {
 		__cond_resched();
 		return 1;
 	}
@@ -6579,12 +6606,12 @@ EXPORT_SYMBOL(_cond_resched);
  */
 int cond_resched_lock(spinlock_t *lock)
 {
-	int resched = need_resched() && system_state == SYSTEM_RUNNING;
+	int resched = should_resched();
 	int ret = 0;
 
 	if (spin_needbreak(lock) || resched) {
 		spin_unlock(lock);
-		if (resched && need_resched())
+		if (resched)
 			__cond_resched();
 		else
 			cpu_relax();
@@ -6599,7 +6626,7 @@ int __sched cond_resched_softirq(void)
 {
 	BUG_ON(!in_softirq());
 
-	if (need_resched() && system_state == SYSTEM_RUNNING) {
+	if (should_resched()) {
 		local_bh_enable();
 		__cond_resched();
 		local_bh_disable();
@@ -7262,6 +7289,7 @@ static void migrate_dead_tasks(unsigned int dead_cpu)
 static void calc_global_load_remove(struct rq *rq)
 {
 	atomic_long_sub(rq->calc_load_active, &calc_load_tasks);
+	rq->calc_load_active = 0;
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
@@ -7488,6 +7516,7 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
 		task_rq_unlock(rq, &flags);
 		get_task_struct(p);
 		cpu_rq(cpu)->migration_thread = p;
+		rq->calc_load_update = calc_load_update;
 		break;
 
 	case CPU_ONLINE:
@@ -7498,8 +7527,6 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
 		/* Update our root-domain */
 		rq = cpu_rq(cpu);
 		spin_lock_irqsave(&rq->lock, flags);
-		rq->calc_load_update = calc_load_update;
-		rq->calc_load_active = 0;
 		if (rq->rd) {
 			BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
 
@@ -9070,7 +9097,7 @@ static void init_rt_rq(struct rt_rq *rt_rq, struct rq *rq)
 #ifdef CONFIG_SMP
 	rt_rq->rt_nr_migratory = 0;
 	rt_rq->overloaded = 0;
-	plist_head_init(&rq->rt.pushable_tasks, &rq->lock);
+	plist_head_init(&rt_rq->pushable_tasks, &rq->lock);
 #endif
 
 	rt_rq->rt_time = 0;
diff --git a/kernel/sched_cpupri.c b/kernel/sched_cpupri.c
index e6c251790dd..d014efbf947 100644
--- a/kernel/sched_cpupri.c
+++ b/kernel/sched_cpupri.c
@@ -81,8 +81,21 @@ int cpupri_find(struct cpupri *cp, struct task_struct *p,
 		if (cpumask_any_and(&p->cpus_allowed, vec->mask) >= nr_cpu_ids)
 			continue;
 
-		if (lowest_mask)
+		if (lowest_mask) {
 			cpumask_and(lowest_mask, &p->cpus_allowed, vec->mask);
+
+			/*
+			 * We have to ensure that we have at least one bit
+			 * still set in the array, since the map could have
+			 * been concurrently emptied between the first and
+			 * second reads of vec->mask.  If we hit this
+			 * condition, simply act as though we never hit this
+			 * priority level and continue on.
+			 */
+			if (cpumask_any(lowest_mask) >= nr_cpu_ids)
+				continue;
+		}
+
 		return 1;
 	}
 
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index ba7fd6e9556..652e8bdef9a 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -266,6 +266,12 @@ static inline u64 min_vruntime(u64 min_vruntime, u64 vruntime)
 	return min_vruntime;
 }
 
+static inline int entity_before(struct sched_entity *a,
+				struct sched_entity *b)
+{
+	return (s64)(a->vruntime - b->vruntime) < 0;
+}
+
 static inline s64 entity_key(struct cfs_rq *cfs_rq, struct sched_entity *se)
 {
 	return se->vruntime - cfs_rq->min_vruntime;
@@ -605,9 +611,13 @@ account_entity_dequeue(struct cfs_rq *cfs_rq, struct sched_entity *se)
 static void enqueue_sleeper(struct cfs_rq *cfs_rq, struct sched_entity *se)
 {
 #ifdef CONFIG_SCHEDSTATS
+	struct task_struct *tsk = NULL;
+
+	if (entity_is_task(se))
+		tsk = task_of(se);
+
 	if (se->sleep_start) {
 		u64 delta = rq_of(cfs_rq)->clock - se->sleep_start;
-		struct task_struct *tsk = task_of(se);
 
 		if ((s64)delta < 0)
 			delta = 0;
@@ -618,11 +628,11 @@ static void enqueue_sleeper(struct cfs_rq *cfs_rq, struct sched_entity *se)
 		se->sleep_start = 0;
 		se->sum_sleep_runtime += delta;
 
-		account_scheduler_latency(tsk, delta >> 10, 1);
+		if (tsk)
+			account_scheduler_latency(tsk, delta >> 10, 1);
 	}
 	if (se->block_start) {
 		u64 delta = rq_of(cfs_rq)->clock - se->block_start;
-		struct task_struct *tsk = task_of(se);
 
 		if ((s64)delta < 0)
 			delta = 0;
@@ -633,17 +643,19 @@ static void enqueue_sleeper(struct cfs_rq *cfs_rq, struct sched_entity *se)
 		se->block_start = 0;
 		se->sum_sleep_runtime += delta;
 
-		/*
-		 * Blocking time is in units of nanosecs, so shift by 20 to
-		 * get a milliseconds-range estimation of the amount of
-		 * time that the task spent sleeping:
-		 */
-		if (unlikely(prof_on == SLEEP_PROFILING)) {
-
-			profile_hits(SLEEP_PROFILING, (void *)get_wchan(tsk),
-				     delta >> 20);
+		if (tsk) {
+			/*
+			 * Blocking time is in units of nanosecs, so shift by
+			 * 20 to get a milliseconds-range estimation of the
+			 * amount of time that the task spent sleeping:
+			 */
+			if (unlikely(prof_on == SLEEP_PROFILING)) {
+				profile_hits(SLEEP_PROFILING,
+						(void *)get_wchan(tsk),
+						delta >> 20);
+			}
+			account_scheduler_latency(tsk, delta >> 10, 0);
 		}
-		account_scheduler_latency(tsk, delta >> 10, 0);
 	}
 #endif
 }
@@ -687,7 +699,8 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial)
 			 * all of which have the same weight.
 			 */
 			if (sched_feat(NORMALIZED_SLEEPER) &&
-					task_of(se)->policy != SCHED_IDLE)
+					(!entity_is_task(se) ||
+					 task_of(se)->policy != SCHED_IDLE))
 				thresh = calc_delta_fair(thresh, se);
 
 			vruntime -= thresh;
@@ -1016,7 +1029,7 @@ static void yield_task_fair(struct rq *rq)
 	/*
 	 * Already in the rightmost position?
 	 */
-	if (unlikely(!rightmost || rightmost->vruntime < se->vruntime))
+	if (unlikely(!rightmost || entity_before(rightmost, se)))
 		return;
 
 	/*
@@ -1712,7 +1725,7 @@ static void task_new_fair(struct rq *rq, struct task_struct *p)
 
 	/* 'curr' will be NULL if the child belongs to a different group */
 	if (sysctl_sched_child_runs_first && this_cpu == task_cpu(p) &&
-			curr && curr->vruntime < se->vruntime) {
+			curr && entity_before(curr, se)) {
 		/*
 		 * Upon rescheduling, sched_class::put_prev_task() will place
 		 * 'current' within the tree based on its new key value.
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 9bf0d2a7304..3918e01994e 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -10,6 +10,8 @@ static inline struct task_struct *rt_task_of(struct sched_rt_entity *rt_se)
 
 #ifdef CONFIG_RT_GROUP_SCHED
 
+#define rt_entity_is_task(rt_se) (!(rt_se)->my_q)
+
 static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq)
 {
 	return rt_rq->rq;
@@ -22,6 +24,8 @@ static inline struct rt_rq *rt_rq_of_se(struct sched_rt_entity *rt_se)
 
 #else /* CONFIG_RT_GROUP_SCHED */
 
+#define rt_entity_is_task(rt_se) (1)
+
 static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq)
 {
 	return container_of(rt_rq, struct rq, rt);
@@ -73,7 +77,7 @@ static inline void rt_clear_overload(struct rq *rq)
 
 static void update_rt_migration(struct rt_rq *rt_rq)
 {
-	if (rt_rq->rt_nr_migratory && (rt_rq->rt_nr_running > 1)) {
+	if (rt_rq->rt_nr_migratory && rt_rq->rt_nr_total > 1) {
 		if (!rt_rq->overloaded) {
 			rt_set_overload(rq_of_rt_rq(rt_rq));
 			rt_rq->overloaded = 1;
@@ -86,6 +90,12 @@ static void update_rt_migration(struct rt_rq *rt_rq)
 
 static void inc_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
 {
+	if (!rt_entity_is_task(rt_se))
+		return;
+
+	rt_rq = &rq_of_rt_rq(rt_rq)->rt;
+
+	rt_rq->rt_nr_total++;
 	if (rt_se->nr_cpus_allowed > 1)
 		rt_rq->rt_nr_migratory++;
 
@@ -94,6 +104,12 @@ static void inc_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
 
 static void dec_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
 {
+	if (!rt_entity_is_task(rt_se))
+		return;
+
+	rt_rq = &rq_of_rt_rq(rt_rq)->rt;
+
+	rt_rq->rt_nr_total--;
 	if (rt_se->nr_cpus_allowed > 1)
 		rt_rq->rt_nr_migratory--;
 
diff --git a/kernel/signal.c b/kernel/signal.c
index ccf1ceedaeb..64c5deeaca5 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2454,11 +2454,9 @@ do_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, unsigned long s
 	stack_t oss;
 	int error;
 
-	if (uoss) {
-		oss.ss_sp = (void __user *) current->sas_ss_sp;
-		oss.ss_size = current->sas_ss_size;
-		oss.ss_flags = sas_ss_flags(sp);
-	}
+	oss.ss_sp = (void __user *) current->sas_ss_sp;
+	oss.ss_size = current->sas_ss_size;
+	oss.ss_flags = sas_ss_flags(sp);
 
 	if (uss) {
 		void __user *ss_sp;
@@ -2466,10 +2464,12 @@ do_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, unsigned long s
 		int ss_flags;
 
 		error = -EFAULT;
-		if (!access_ok(VERIFY_READ, uss, sizeof(*uss))
-		    || __get_user(ss_sp, &uss->ss_sp)
-		    || __get_user(ss_flags, &uss->ss_flags)
-		    || __get_user(ss_size, &uss->ss_size))
+		if (!access_ok(VERIFY_READ, uss, sizeof(*uss)))
+			goto out;
+		error = __get_user(ss_sp, &uss->ss_sp) |
+			__get_user(ss_flags, &uss->ss_flags) |
+			__get_user(ss_size, &uss->ss_size);
+		if (error)
 			goto out;
 
 		error = -EPERM;
@@ -2501,13 +2501,16 @@ do_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, unsigned long s
 		current->sas_ss_size = ss_size;
 	}
 
+	error = 0;
 	if (uoss) {
 		error = -EFAULT;
-		if (copy_to_user(uoss, &oss, sizeof(oss)))
+		if (!access_ok(VERIFY_WRITE, uoss, sizeof(*uoss)))
 			goto out;
+		error = __put_user(oss.ss_sp, &uoss->ss_sp) |
+			__put_user(oss.ss_size, &uoss->ss_size) |
+			__put_user(oss.ss_flags, &uoss->ss_flags);
 	}
 
-	error = 0;
 out:
 	return error;
 }
diff --git a/kernel/smp.c b/kernel/smp.c
index ad63d850120..94188b8ecc3 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -57,7 +57,7 @@ hotplug_cfd(struct notifier_block *nfb, unsigned long action, void *hcpu)
 			return NOTIFY_BAD;
 		break;
 
-#ifdef CONFIG_CPU_HOTPLUG
+#ifdef CONFIG_HOTPLUG_CPU
 	case CPU_UP_CANCELED:
 	case CPU_UP_CANCELED_FROZEN:
 
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 3a94905fa5d..eb5e131a048 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -345,7 +345,9 @@ void open_softirq(int nr, void (*action)(struct softirq_action *))
 	softirq_vec[nr].action = action;
 }
 
-/* Tasklets */
+/*
+ * Tasklets
+ */
 struct tasklet_head
 {
 	struct tasklet_struct *head;
@@ -493,6 +495,66 @@ void tasklet_kill(struct tasklet_struct *t)
 
 EXPORT_SYMBOL(tasklet_kill);
 
+/*
+ * tasklet_hrtimer
+ */
+
+/*
+ * The trampoline is called when the hrtimer expires. If this is
+ * called from the hrtimer interrupt then we schedule the tasklet as
+ * the timer callback function expects to run in softirq context. If
+ * it's called in softirq context anyway (i.e. high resolution timers
+ * disabled) then the hrtimer callback is called right away.
+ */
+static enum hrtimer_restart __hrtimer_tasklet_trampoline(struct hrtimer *timer)
+{
+	struct tasklet_hrtimer *ttimer =
+		container_of(timer, struct tasklet_hrtimer, timer);
+
+	if (hrtimer_is_hres_active(timer)) {
+		tasklet_hi_schedule(&ttimer->tasklet);
+		return HRTIMER_NORESTART;
+	}
+	return ttimer->function(timer);
+}
+
+/*
+ * Helper function which calls the hrtimer callback from
+ * tasklet/softirq context
+ */
+static void __tasklet_hrtimer_trampoline(unsigned long data)
+{
+	struct tasklet_hrtimer *ttimer = (void *)data;
+	enum hrtimer_restart restart;
+
+	restart = ttimer->function(&ttimer->timer);
+	if (restart != HRTIMER_NORESTART)
+		hrtimer_restart(&ttimer->timer);
+}
+
+/**
+ * tasklet_hrtimer_init - Init a tasklet/hrtimer combo for softirq callbacks
+ * @ttimer:	 tasklet_hrtimer which is initialized
+ * @function:	 hrtimer callback funtion which gets called from softirq context
+ * @which_clock: clock id (CLOCK_MONOTONIC/CLOCK_REALTIME)
+ * @mode:	 hrtimer mode (HRTIMER_MODE_ABS/HRTIMER_MODE_REL)
+ */
+void tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer,
+			  enum hrtimer_restart (*function)(struct hrtimer *),
+			  clockid_t which_clock, enum hrtimer_mode mode)
+{
+	hrtimer_init(&ttimer->timer, which_clock, mode);
+	ttimer->timer.function = __hrtimer_tasklet_trampoline;
+	tasklet_init(&ttimer->tasklet, __tasklet_hrtimer_trampoline,
+		     (unsigned long)ttimer);
+	ttimer->function = function;
+}
+EXPORT_SYMBOL_GPL(tasklet_hrtimer_init);
+
+/*
+ * Remote softirq bits
+ */
+
 DEFINE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list);
 EXPORT_PER_CPU_SYMBOL(softirq_work_list);
 
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 62e4ff9968b..58be76017fd 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -49,6 +49,7 @@
 #include <linux/acpi.h>
 #include <linux/reboot.h>
 #include <linux/ftrace.h>
+#include <linux/security.h>
 #include <linux/slow-work.h>
 #include <linux/perf_counter.h>
 
@@ -335,7 +336,10 @@ static struct ctl_table kern_table[] = {
 		.data		= &sysctl_timer_migration,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &zero,
+		.extra2		= &one,
 	},
 #endif
 	{
@@ -744,6 +748,14 @@ static struct ctl_table kern_table[] = {
 		.proc_handler	= &proc_dointvec,
 	},
 	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "panic_on_io_nmi",
+		.data		= &panic_on_io_nmi,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
+	{
 		.ctl_name	= KERN_BOOTLOADER_TYPE,
 		.procname	= "bootloader_type",
 		.data		= &bootloader_type,
@@ -1295,10 +1307,10 @@ static struct ctl_table vm_table[] = {
 	{
 		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "mmap_min_addr",
-		.data		= &mmap_min_addr,
-		.maxlen         = sizeof(unsigned long),
+		.data		= &dac_mmap_min_addr,
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0644,
-		.proc_handler	= &proc_doulongvec_minmax,
+		.proc_handler	= &mmap_min_addr_handler,
 	},
 #ifdef CONFIG_NUMA
 	{
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 1ad6dd46111..620b58abdc3 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -137,11 +137,12 @@ int clockevents_program_event(struct clock_event_device *dev, ktime_t expires,
  */
 int clockevents_register_notifier(struct notifier_block *nb)
 {
+	unsigned long flags;
 	int ret;
 
-	spin_lock(&clockevents_lock);
+	spin_lock_irqsave(&clockevents_lock, flags);
 	ret = raw_notifier_chain_register(&clockevents_chain, nb);
-	spin_unlock(&clockevents_lock);
+	spin_unlock_irqrestore(&clockevents_lock, flags);
 
 	return ret;
 }
@@ -178,16 +179,18 @@ static void clockevents_notify_released(void)
  */
 void clockevents_register_device(struct clock_event_device *dev)
 {
+	unsigned long flags;
+
 	BUG_ON(dev->mode != CLOCK_EVT_MODE_UNUSED);
 	BUG_ON(!dev->cpumask);
 
-	spin_lock(&clockevents_lock);
+	spin_lock_irqsave(&clockevents_lock, flags);
 
 	list_add(&dev->list, &clockevent_devices);
 	clockevents_do_notify(CLOCK_EVT_NOTIFY_ADD, dev);
 	clockevents_notify_released();
 
-	spin_unlock(&clockevents_lock);
+	spin_unlock_irqrestore(&clockevents_lock, flags);
 }
 EXPORT_SYMBOL_GPL(clockevents_register_device);
 
@@ -235,8 +238,9 @@ void clockevents_exchange_device(struct clock_event_device *old,
 void clockevents_notify(unsigned long reason, void *arg)
 {
 	struct list_head *node, *tmp;
+	unsigned long flags;
 
-	spin_lock(&clockevents_lock);
+	spin_lock_irqsave(&clockevents_lock, flags);
 	clockevents_do_notify(reason, arg);
 
 	switch (reason) {
@@ -251,18 +255,7 @@ void clockevents_notify(unsigned long reason, void *arg)
 	default:
 		break;
 	}
-	spin_unlock(&clockevents_lock);
+	spin_unlock_irqrestore(&clockevents_lock, flags);
 }
 EXPORT_SYMBOL_GPL(clockevents_notify);
-
-ktime_t clockevents_get_next_event(int cpu)
-{
-	struct tick_device *td;
-	struct clock_event_device *dev;
-
-	td = &per_cpu(tick_cpu_device, cpu);
-	dev = td->evtdev;
-
-	return dev->next_event;
-}
 #endif
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 592bf584d1d..7466cb81125 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -513,7 +513,7 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev,
 	 * Check to make sure we don't switch to a non-highres capable
 	 * clocksource if the tick code is in oneshot mode (highres or nohz)
 	 */
-	if (tick_oneshot_mode_active() &&
+	if (tick_oneshot_mode_active() && ovr &&
 	    !(ovr->flags & CLOCK_SOURCE_VALID_FOR_HRES)) {
 		printk(KERN_WARNING "%s clocksource is not HRT compatible. "
 			"Cannot switch while in HRT/NOHZ mode\n", ovr->name);
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 877dbedc311..c2ec25087a3 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -205,11 +205,11 @@ static void tick_handle_periodic_broadcast(struct clock_event_device *dev)
  * Powerstate information: The system enters/leaves a state, where
  * affected devices might stop
  */
-static void tick_do_broadcast_on_off(void *why)
+static void tick_do_broadcast_on_off(unsigned long *reason)
 {
 	struct clock_event_device *bc, *dev;
 	struct tick_device *td;
-	unsigned long flags, *reason = why;
+	unsigned long flags;
 	int cpu, bc_stopped;
 
 	spin_lock_irqsave(&tick_broadcast_lock, flags);
@@ -276,8 +276,7 @@ void tick_broadcast_on_off(unsigned long reason, int *oncpu)
 		printk(KERN_ERR "tick-broadcast: ignoring broadcast for "
 		       "offline CPU #%d\n", *oncpu);
 	else
-		smp_call_function_single(*oncpu, tick_do_broadcast_on_off,
-					 &reason, 1);
+		tick_do_broadcast_on_off(&reason);
 }
 
 /*
diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c
index a999b92a127..fddd69d16e0 100644
--- a/kernel/time/timer_list.c
+++ b/kernel/time/timer_list.c
@@ -286,7 +286,7 @@ static int __init init_timer_list_procfs(void)
 {
 	struct proc_dir_entry *pe;
 
-	pe = proc_create("timer_list", 0644, NULL, &timer_list_fops);
+	pe = proc_create("timer_list", 0444, NULL, &timer_list_fops);
 	if (!pe)
 		return -ENOMEM;
 	return 0;
diff --git a/kernel/time/timer_stats.c b/kernel/time/timer_stats.c
index c994530d166..4cde8b9c716 100644
--- a/kernel/time/timer_stats.c
+++ b/kernel/time/timer_stats.c
@@ -96,7 +96,7 @@ static DEFINE_MUTEX(show_mutex);
 /*
  * Collection status, active/inactive:
  */
-static int __read_mostly active;
+int __read_mostly timer_stats_active;
 
 /*
  * Beginning/end timestamps of measurement:
@@ -242,7 +242,7 @@ void timer_stats_update_stats(void *timer, pid_t pid, void *startf,
 	struct entry *entry, input;
 	unsigned long flags;
 
-	if (likely(!active))
+	if (likely(!timer_stats_active))
 		return;
 
 	lock = &per_cpu(lookup_lock, raw_smp_processor_id());
@@ -254,7 +254,7 @@ void timer_stats_update_stats(void *timer, pid_t pid, void *startf,
 	input.timer_flag = timer_flag;
 
 	spin_lock_irqsave(lock, flags);
-	if (!active)
+	if (!timer_stats_active)
 		goto out_unlock;
 
 	entry = tstat_lookup(&input, comm);
@@ -290,7 +290,7 @@ static int tstats_show(struct seq_file *m, void *v)
 	/*
 	 * If still active then calculate up to now:
 	 */
-	if (active)
+	if (timer_stats_active)
 		time_stop = ktime_get();
 
 	time = ktime_sub(time_stop, time_start);
@@ -368,18 +368,18 @@ static ssize_t tstats_write(struct file *file, const char __user *buf,
 	mutex_lock(&show_mutex);
 	switch (ctl[0]) {
 	case '0':
-		if (active) {
-			active = 0;
+		if (timer_stats_active) {
+			timer_stats_active = 0;
 			time_stop = ktime_get();
 			sync_access();
 		}
 		break;
 	case '1':
-		if (!active) {
+		if (!timer_stats_active) {
 			reset_entries();
 			time_start = ktime_get();
 			smp_mb();
-			active = 1;
+			timer_stats_active = 1;
 		}
 		break;
 	default:
diff --git a/kernel/timer.c b/kernel/timer.c
index 54d3912f8ca..a7f07d5a624 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -380,6 +380,8 @@ static void timer_stats_account_timer(struct timer_list *timer)
 {
 	unsigned int flag = 0;
 
+	if (likely(!timer->start_site))
+		return;
 	if (unlikely(tbase_get_deferrable(timer->base)))
 		flag |= TIMER_STATS_FLAG_DEFERRABLE;
 
@@ -712,7 +714,7 @@ int mod_timer(struct timer_list *timer, unsigned long expires)
 	 * networking code - if the timer is re-modified
 	 * to be the same thing then just return:
 	 */
-	if (timer->expires == expires && timer_pending(timer))
+	if (timer_pending(timer) && timer->expires == expires)
 		return 1;
 
 	return __mod_timer(timer, expires, false, TIMER_NOT_PINNED);
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 1551f47e766..019f380fd76 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -226,13 +226,13 @@ config BOOT_TRACER
 	  the timings of the initcalls and traces key events and the identity
 	  of tasks that can cause boot delays, such as context-switches.
 
-	  Its aim is to be parsed by the /scripts/bootgraph.pl tool to
+	  Its aim is to be parsed by the scripts/bootgraph.pl tool to
 	  produce pretty graphics about boot inefficiencies, giving a visual
 	  representation of the delays during initcalls - but the raw
 	  /debug/tracing/trace text output is readable too.
 
-	  You must pass in ftrace=initcall to the kernel command line
-	  to enable this on bootup.
+	  You must pass in initcall_debug and ftrace=initcall to the kernel
+	  command line to enable this on bootup.
 
 config TRACE_BRANCH_PROFILING
 	bool
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 39af8af6fc3..7a34cb563fe 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/debugfs.h>
+#include <linux/smp_lock.h>
 #include <linux/time.h>
 #include <linux/uaccess.h>
 
@@ -266,8 +267,8 @@ static void blk_trace_free(struct blk_trace *bt)
 {
 	debugfs_remove(bt->msg_file);
 	debugfs_remove(bt->dropped_file);
-	debugfs_remove(bt->dir);
 	relay_close(bt->rchan);
+	debugfs_remove(bt->dir);
 	free_percpu(bt->sequence);
 	free_percpu(bt->msg_data);
 	kfree(bt);
@@ -377,18 +378,8 @@ static int blk_subbuf_start_callback(struct rchan_buf *buf, void *subbuf,
 
 static int blk_remove_buf_file_callback(struct dentry *dentry)
 {
-	struct dentry *parent = dentry->d_parent;
 	debugfs_remove(dentry);
 
-	/*
-	* this will fail for all but the last file, but that is ok. what we
-	* care about is the top level buts->name directory going away, when
-	* the last trace file is gone. Then we don't have to rmdir() that
-	* manually on trace stop, so it nicely solves the issue with
-	* force killing of running traces.
-	*/
-
-	debugfs_remove(parent);
 	return 0;
 }
 
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 3718d55fb4c..25edd5cc593 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -291,7 +291,9 @@ function_stat_next(void *v, int idx)
 	pg = (struct ftrace_profile_page *)((unsigned long)rec & PAGE_MASK);
 
  again:
-	rec++;
+	if (idx != 0)
+		rec++;
+
 	if ((void *)rec >= (void *)&pg->records[pg->index]) {
 		pg = pg->next;
 		if (!pg)
@@ -766,7 +768,7 @@ static struct tracer_stat function_stats __initdata = {
 	.stat_show	= function_stat_show
 };
 
-static void ftrace_profile_debugfs(struct dentry *d_tracer)
+static __init void ftrace_profile_debugfs(struct dentry *d_tracer)
 {
 	struct ftrace_profile_stat *stat;
 	struct dentry *entry;
@@ -784,7 +786,6 @@ static void ftrace_profile_debugfs(struct dentry *d_tracer)
 			 * The files created are permanent, if something happens
 			 * we still do not free memory.
 			 */
-			kfree(stat);
 			WARN(1,
 			     "Could not allocate stat file for cpu %d\n",
 			     cpu);
@@ -811,7 +812,7 @@ static void ftrace_profile_debugfs(struct dentry *d_tracer)
 }
 
 #else /* CONFIG_FUNCTION_PROFILER */
-static void ftrace_profile_debugfs(struct dentry *d_tracer)
+static __init void ftrace_profile_debugfs(struct dentry *d_tracer)
 {
 }
 #endif /* CONFIG_FUNCTION_PROFILER */
@@ -1417,10 +1418,20 @@ static void *t_hash_start(struct seq_file *m, loff_t *pos)
 {
 	struct ftrace_iterator *iter = m->private;
 	void *p = NULL;
+	loff_t l;
+
+	if (!(iter->flags & FTRACE_ITER_HASH))
+		*pos = 0;
 
 	iter->flags |= FTRACE_ITER_HASH;
 
-	return t_hash_next(m, p, pos);
+	iter->hidx = 0;
+	for (l = 0; l <= *pos; ) {
+		p = t_hash_next(m, p, &l);
+		if (!p)
+			break;
+	}
+	return p;
 }
 
 static int t_hash_show(struct seq_file *m, void *v)
@@ -1467,8 +1478,6 @@ t_next(struct seq_file *m, void *v, loff_t *pos)
 			iter->pg = iter->pg->next;
 			iter->idx = 0;
 			goto retry;
-		} else {
-			iter->idx = -1;
 		}
 	} else {
 		rec = &iter->pg->records[iter->idx++];
@@ -1497,6 +1506,7 @@ static void *t_start(struct seq_file *m, loff_t *pos)
 {
 	struct ftrace_iterator *iter = m->private;
 	void *p = NULL;
+	loff_t l;
 
 	mutex_lock(&ftrace_lock);
 	/*
@@ -1508,23 +1518,21 @@ static void *t_start(struct seq_file *m, loff_t *pos)
 		if (*pos > 0)
 			return t_hash_start(m, pos);
 		iter->flags |= FTRACE_ITER_PRINTALL;
-		(*pos)++;
 		return iter;
 	}
 
 	if (iter->flags & FTRACE_ITER_HASH)
 		return t_hash_start(m, pos);
 
-	if (*pos > 0) {
-		if (iter->idx < 0)
-			return p;
-		(*pos)--;
-		iter->idx--;
+	iter->pg = ftrace_pages_start;
+	iter->idx = 0;
+	for (l = 0; l <= *pos; ) {
+		p = t_next(m, p, &l);
+		if (!p)
+			break;
 	}
 
-	p = t_next(m, p, pos);
-
-	if (!p)
+	if (!p && iter->flags & FTRACE_ITER_FILTER)
 		return t_hash_start(m, pos);
 
 	return p;
@@ -1654,7 +1662,7 @@ ftrace_regex_open(struct inode *inode, struct file *file, int enable)
 
 	mutex_lock(&ftrace_regex_lock);
 	if ((file->f_mode & FMODE_WRITE) &&
-	    !(file->f_flags & O_APPEND))
+	    (file->f_flags & O_TRUNC))
 		ftrace_filter_reset(enable);
 
 	if (file->f_mode & FMODE_READ) {
@@ -2270,7 +2278,11 @@ ftrace_regex_write(struct file *file, const char __user *ubuf,
 	read++;
 	cnt--;
 
-	if (!(iter->flags & ~FTRACE_ITER_CONT)) {
+	/*
+	 * If the parser haven't finished with the last write,
+	 * continue reading the user input without skipping spaces.
+	 */
+	if (!(iter->flags & FTRACE_ITER_CONT)) {
 		/* skip white space */
 		while (cnt && isspace(ch)) {
 			ret = get_user(ch, ubuf++);
@@ -2280,8 +2292,9 @@ ftrace_regex_write(struct file *file, const char __user *ubuf,
 			cnt--;
 		}
 
+		/* only spaces were written */
 		if (isspace(ch)) {
-			file->f_pos += read;
+			*ppos += read;
 			ret = read;
 			goto out;
 		}
@@ -2311,12 +2324,12 @@ ftrace_regex_write(struct file *file, const char __user *ubuf,
 		if (ret)
 			goto out;
 		iter->buffer_idx = 0;
-	} else
+	} else {
 		iter->flags |= FTRACE_ITER_CONT;
+		iter->buffer[iter->buffer_idx++] = ch;
+	}
 
-
-	file->f_pos += read;
-
+	*ppos += read;
 	ret = read;
  out:
 	mutex_unlock(&ftrace_regex_lock);
@@ -2500,32 +2513,31 @@ int ftrace_graph_count;
 unsigned long ftrace_graph_funcs[FTRACE_GRAPH_MAX_FUNCS] __read_mostly;
 
 static void *
-g_next(struct seq_file *m, void *v, loff_t *pos)
+__g_next(struct seq_file *m, loff_t *pos)
 {
 	unsigned long *array = m->private;
-	int index = *pos;
 
-	(*pos)++;
-
-	if (index >= ftrace_graph_count)
+	if (*pos >= ftrace_graph_count)
 		return NULL;
+	return &array[*pos];
+}
 
-	return &array[index];
+static void *
+g_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	(*pos)++;
+	return __g_next(m, pos);
 }
 
 static void *g_start(struct seq_file *m, loff_t *pos)
 {
-	void *p = NULL;
-
 	mutex_lock(&graph_lock);
 
 	/* Nothing, tell g_show to print all functions are enabled */
 	if (!ftrace_graph_count && !*pos)
 		return (void *)1;
 
-	p = g_next(m, p, pos);
-
-	return p;
+	return __g_next(m, pos);
 }
 
 static void g_stop(struct seq_file *m, void *p)
@@ -2570,7 +2582,7 @@ ftrace_graph_open(struct inode *inode, struct file *file)
 
 	mutex_lock(&graph_lock);
 	if ((file->f_mode & FMODE_WRITE) &&
-	    !(file->f_flags & O_APPEND)) {
+	    (file->f_flags & O_TRUNC)) {
 		ftrace_graph_count = 0;
 		memset(ftrace_graph_funcs, 0, sizeof(ftrace_graph_funcs));
 	}
@@ -2589,6 +2601,14 @@ ftrace_graph_open(struct inode *inode, struct file *file)
 }
 
 static int
+ftrace_graph_release(struct inode *inode, struct file *file)
+{
+	if (file->f_mode & FMODE_READ)
+		seq_release(inode, file);
+	return 0;
+}
+
+static int
 ftrace_set_func(unsigned long *array, int *idx, char *buffer)
 {
 	struct dyn_ftrace *rec;
@@ -2717,9 +2737,10 @@ ftrace_graph_write(struct file *file, const char __user *ubuf,
 }
 
 static const struct file_operations ftrace_graph_fops = {
-	.open = ftrace_graph_open,
-	.read = seq_read,
-	.write = ftrace_graph_write,
+	.open		= ftrace_graph_open,
+	.read		= seq_read,
+	.write		= ftrace_graph_write,
+	.release	= ftrace_graph_release,
 };
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
@@ -3152,10 +3173,10 @@ ftrace_enable_sysctl(struct ctl_table *table, int write,
 
 	ret  = proc_dointvec(table, write, file, buffer, lenp, ppos);
 
-	if (ret || !write || (last_ftrace_enabled == ftrace_enabled))
+	if (ret || !write || (last_ftrace_enabled == !!ftrace_enabled))
 		goto out;
 
-	last_ftrace_enabled = ftrace_enabled;
+	last_ftrace_enabled = !!ftrace_enabled;
 
 	if (ftrace_enabled) {
 
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 04dac263825..a330513d96c 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -735,6 +735,7 @@ ring_buffer_free(struct ring_buffer *buffer)
 
 	put_online_cpus();
 
+	kfree(buffer->buffers);
 	free_cpumask_var(buffer->cpumask);
 
 	kfree(buffer);
@@ -1563,6 +1564,8 @@ rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer,
 	return NULL;
 }
 
+#ifdef CONFIG_TRACING
+
 #define TRACE_RECURSIVE_DEPTH 16
 
 static int trace_recursive_lock(void)
@@ -1593,6 +1596,13 @@ static void trace_recursive_unlock(void)
 	current->trace_recursion--;
 }
 
+#else
+
+#define trace_recursive_lock()		(0)
+#define trace_recursive_unlock()	do { } while (0)
+
+#endif
+
 static DEFINE_PER_CPU(int, rb_need_resched);
 
 /**
@@ -1776,7 +1786,7 @@ void ring_buffer_discard_commit(struct ring_buffer *buffer,
 	 */
 	RB_WARN_ON(buffer, !local_read(&cpu_buffer->committing));
 
-	if (!rb_try_to_discard(cpu_buffer, event))
+	if (rb_try_to_discard(cpu_buffer, event))
 		goto out;
 
 	/*
@@ -2374,7 +2384,6 @@ rb_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts)
 		 * the box. Return the padding, and we will release
 		 * the current locks, and try again.
 		 */
-		rb_advance_reader(cpu_buffer);
 		return event;
 
 	case RINGBUF_TYPE_TIME_EXTEND:
@@ -2477,7 +2486,7 @@ static inline int rb_ok_to_lock(void)
 	 * buffer too. A one time deal is all you get from reading
 	 * the ring buffer from an NMI.
 	 */
-	if (likely(!in_nmi() && !oops_in_progress))
+	if (likely(!in_nmi()))
 		return 1;
 
 	tracing_off_permanent();
@@ -2510,6 +2519,8 @@ ring_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts)
 	if (dolock)
 		spin_lock(&cpu_buffer->reader_lock);
 	event = rb_buffer_peek(buffer, cpu, ts);
+	if (event && event->type_len == RINGBUF_TYPE_PADDING)
+		rb_advance_reader(cpu_buffer);
 	if (dolock)
 		spin_unlock(&cpu_buffer->reader_lock);
 	local_irq_restore(flags);
@@ -2581,12 +2592,9 @@ ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts)
 		spin_lock(&cpu_buffer->reader_lock);
 
 	event = rb_buffer_peek(buffer, cpu, ts);
-	if (!event)
-		goto out_unlock;
-
-	rb_advance_reader(cpu_buffer);
+	if (event)
+		rb_advance_reader(cpu_buffer);
 
- out_unlock:
 	if (dolock)
 		spin_unlock(&cpu_buffer->reader_lock);
 	local_irq_restore(flags);
@@ -3104,6 +3112,7 @@ int ring_buffer_read_page(struct ring_buffer *buffer,
 }
 EXPORT_SYMBOL_GPL(ring_buffer_read_page);
 
+#ifdef CONFIG_TRACING
 static ssize_t
 rb_simple_read(struct file *filp, char __user *ubuf,
 	       size_t cnt, loff_t *ppos)
@@ -3171,6 +3180,7 @@ static __init int rb_init_debugfs(void)
 }
 
 fs_initcall(rb_init_debugfs);
+#endif
 
 #ifdef CONFIG_HOTPLUG_CPU
 static int rb_cpu_notify(struct notifier_block *self,
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 076fa6f0ee4..8c358395d33 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -17,6 +17,7 @@
 #include <linux/writeback.h>
 #include <linux/kallsyms.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 #include <linux/notifier.h>
 #include <linux/irqflags.h>
 #include <linux/debugfs.h>
@@ -284,13 +285,12 @@ void trace_wake_up(void)
 static int __init set_buf_size(char *str)
 {
 	unsigned long buf_size;
-	int ret;
 
 	if (!str)
 		return 0;
-	ret = strict_strtoul(str, 0, &buf_size);
+	buf_size = memparse(str, &str);
 	/* nr_entries can not be zero */
-	if (ret < 0 || buf_size == 0)
+	if (buf_size == 0)
 		return 0;
 	trace_buf_size = buf_size;
 	return 1;
@@ -848,6 +848,7 @@ tracing_generic_entry_update(struct trace_entry *entry, unsigned long flags,
 		((pc & SOFTIRQ_MASK) ? TRACE_FLAG_SOFTIRQ : 0) |
 		(need_resched() ? TRACE_FLAG_NEED_RESCHED : 0);
 }
+EXPORT_SYMBOL_GPL(tracing_generic_entry_update);
 
 struct ring_buffer_event *trace_buffer_lock_reserve(struct trace_array *tr,
 						    int type,
@@ -2031,7 +2032,7 @@ static int tracing_open(struct inode *inode, struct file *file)
 
 	/* If this file was open for write, then erase contents */
 	if ((file->f_mode & FMODE_WRITE) &&
-	    !(file->f_flags & O_APPEND)) {
+	    (file->f_flags & O_TRUNC)) {
 		long cpu = (long) inode->i_private;
 
 		if (cpu == TRACE_PIPE_ALL_CPU)
@@ -2053,25 +2054,23 @@ static int tracing_open(struct inode *inode, struct file *file)
 static void *
 t_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	struct tracer *t = m->private;
+	struct tracer *t = v;
 
 	(*pos)++;
 
 	if (t)
 		t = t->next;
 
-	m->private = t;
-
 	return t;
 }
 
 static void *t_start(struct seq_file *m, loff_t *pos)
 {
-	struct tracer *t = m->private;
+	struct tracer *t;
 	loff_t l = 0;
 
 	mutex_lock(&trace_types_lock);
-	for (; t && l < *pos; t = t_next(m, t, &l))
+	for (t = trace_types; t && l < *pos; t = t_next(m, t, &l))
 		;
 
 	return t;
@@ -2107,18 +2106,10 @@ static struct seq_operations show_traces_seq_ops = {
 
 static int show_traces_open(struct inode *inode, struct file *file)
 {
-	int ret;
-
 	if (tracing_disabled)
 		return -ENODEV;
 
-	ret = seq_open(file, &show_traces_seq_ops);
-	if (!ret) {
-		struct seq_file *m = file->private_data;
-		m->private = trace_types;
-	}
-
-	return ret;
+	return seq_open(file, &show_traces_seq_ops);
 }
 
 static ssize_t
@@ -3095,7 +3086,8 @@ tracing_fill_pipe_page(size_t rem, struct trace_iterator *iter)
 			break;
 		}
 
-		trace_consume(iter);
+		if (ret != TRACE_TYPE_NO_CONSUME)
+			trace_consume(iter);
 		rem -= count;
 		if (!find_next_entry_inc(iter))	{
 			rem = 0;
@@ -3904,17 +3896,9 @@ trace_options_core_write(struct file *filp, const char __user *ubuf, size_t cnt,
 	if (ret < 0)
 		return ret;
 
-	switch (val) {
-	case 0:
-		trace_flags &= ~(1 << index);
-		break;
-	case 1:
-		trace_flags |= 1 << index;
-		break;
-
-	default:
+	if (val != 0 && val != 1)
 		return -EINVAL;
-	}
+	set_tracer_flags(1 << index, val);
 
 	*ppos += cnt;
 
@@ -4243,8 +4227,11 @@ static void __ftrace_dump(bool disable_tracing)
 		iter.pos = -1;
 
 		if (find_next_entry_inc(&iter) != NULL) {
-			print_trace_line(&iter);
-			trace_consume(&iter);
+			int ret;
+
+			ret = print_trace_line(&iter);
+			if (ret != TRACE_TYPE_NO_CONSUME)
+				trace_consume(&iter);
 		}
 
 		trace_printk_seq(&iter.seq);
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 6e735d4771f..8b9f4f6e955 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -438,10 +438,6 @@ struct trace_entry *tracing_get_trace_entry(struct trace_array *tr,
 struct trace_entry *trace_find_next_entry(struct trace_iterator *iter,
 					  int *ent_cpu, u64 *ent_ts);
 
-void tracing_generic_entry_update(struct trace_entry *entry,
-				  unsigned long flags,
-				  int pc);
-
 void default_wait_pipe(struct trace_iterator *iter);
 void poll_wait_pipe(struct trace_iterator *iter);
 
@@ -597,6 +593,7 @@ print_graph_function(struct trace_iterator *iter)
 
 extern struct pid *ftrace_pid_trace;
 
+#ifdef CONFIG_FUNCTION_TRACER
 static inline int ftrace_trace_task(struct task_struct *task)
 {
 	if (!ftrace_pid_trace)
@@ -604,6 +601,12 @@ static inline int ftrace_trace_task(struct task_struct *task)
 
 	return test_tsk_trace_trace(task);
 }
+#else
+static inline int ftrace_trace_task(struct task_struct *task)
+{
+	return 1;
+}
+#endif
 
 /*
  * trace_iterator_flags is an enumeration that defines bit
diff --git a/kernel/trace/trace_event_profile.c b/kernel/trace/trace_event_profile.c
index 5b5895afecf..11ba5bb4ed0 100644
--- a/kernel/trace/trace_event_profile.c
+++ b/kernel/trace/trace_event_profile.c
@@ -14,7 +14,7 @@ int ftrace_profile_enable(int event_id)
 
 	mutex_lock(&event_mutex);
 	list_for_each_entry(event, &ftrace_events, list) {
-		if (event->id == event_id) {
+		if (event->id == event_id && event->profile_enable) {
 			ret = event->profile_enable(event);
 			break;
 		}
diff --git a/kernel/trace/trace_event_types.h b/kernel/trace/trace_event_types.h
index 5e32e375134..6db005e1248 100644
--- a/kernel/trace/trace_event_types.h
+++ b/kernel/trace/trace_event_types.h
@@ -26,6 +26,9 @@ TRACE_EVENT_FORMAT(funcgraph_exit, TRACE_GRAPH_RET,
 		   ftrace_graph_ret_entry, ignore,
 	TRACE_STRUCT(
 		TRACE_FIELD(unsigned long, ret.func, func)
+		TRACE_FIELD(unsigned long long, ret.calltime, calltime)
+		TRACE_FIELD(unsigned long long, ret.rettime, rettime)
+		TRACE_FIELD(unsigned long, ret.overrun, overrun)
 		TRACE_FIELD(int, ret.depth, depth)
 	),
 	TP_RAW_FMT("<-- %lx (%d)")
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index aa08be69a1b..e75276a49cf 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -300,10 +300,18 @@ t_next(struct seq_file *m, void *v, loff_t *pos)
 
 static void *t_start(struct seq_file *m, loff_t *pos)
 {
+	struct ftrace_event_call *call = NULL;
+	loff_t l;
+
 	mutex_lock(&event_mutex);
-	if (*pos == 0)
-		m->private = ftrace_events.next;
-	return t_next(m, NULL, pos);
+
+	m->private = ftrace_events.next;
+	for (l = 0; l <= *pos; ) {
+		call = t_next(m, NULL, &l);
+		if (!call)
+			break;
+	}
+	return call;
 }
 
 static void *
@@ -332,10 +340,18 @@ s_next(struct seq_file *m, void *v, loff_t *pos)
 
 static void *s_start(struct seq_file *m, loff_t *pos)
 {
+	struct ftrace_event_call *call = NULL;
+	loff_t l;
+
 	mutex_lock(&event_mutex);
-	if (*pos == 0)
-		m->private = ftrace_events.next;
-	return s_next(m, NULL, pos);
+
+	m->private = ftrace_events.next;
+	for (l = 0; l <= *pos; ) {
+		call = s_next(m, NULL, &l);
+		if (!call)
+			break;
+	}
+	return call;
 }
 
 static int t_show(struct seq_file *m, void *v)
@@ -360,7 +376,7 @@ ftrace_event_seq_open(struct inode *inode, struct file *file)
 	const struct seq_operations *seq_ops;
 
 	if ((file->f_mode & FMODE_WRITE) &&
-	    !(file->f_flags & O_APPEND))
+	    (file->f_flags & O_TRUNC))
 		ftrace_clear_events();
 
 	seq_ops = inode->i_private;
@@ -924,7 +940,7 @@ event_create_dir(struct ftrace_event_call *call, struct dentry *d_events,
 		entry = trace_create_file("enable", 0644, call->dir, call,
 					  enable);
 
-	if (call->id)
+	if (call->id && call->profile_enable)
 		entry = trace_create_file("id", 0444, call->dir, call,
 					  id);
 
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index 936c621bbf4..f32dc9d1ea7 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -624,9 +624,6 @@ static int filter_add_subsystem_pred(struct filter_parse_state *ps,
 		return -ENOSPC;
 	}
 
-	filter->preds[filter->n_preds] = pred;
-	filter->n_preds++;
-
 	list_for_each_entry(call, &ftrace_events, list) {
 
 		if (!call->define_fields)
@@ -643,6 +640,9 @@ static int filter_add_subsystem_pred(struct filter_parse_state *ps,
 		}
 		replace_filter_string(call->filter, filter_string);
 	}
+
+	filter->preds[filter->n_preds] = pred;
+	filter->n_preds++;
 out:
 	return err;
 }
@@ -1029,12 +1029,17 @@ static int replace_preds(struct event_subsystem *system,
 
 		if (elt->op == OP_AND || elt->op == OP_OR) {
 			pred = create_logical_pred(elt->op);
+			if (!pred)
+				return -ENOMEM;
 			if (call) {
 				err = filter_add_pred(ps, call, pred);
 				filter_free_pred(pred);
-			} else
+			} else {
 				err = filter_add_subsystem_pred(ps, system,
 							pred, filter_string);
+				if (err)
+					filter_free_pred(pred);
+			}
 			if (err)
 				return err;
 
@@ -1048,12 +1053,17 @@ static int replace_preds(struct event_subsystem *system,
 		}
 
 		pred = create_pred(elt->op, operand1, operand2);
+		if (!pred)
+			return -ENOMEM;
 		if (call) {
 			err = filter_add_pred(ps, call, pred);
 			filter_free_pred(pred);
-		} else
+		} else {
 			err = filter_add_subsystem_pred(ps, system, pred,
 							filter_string);
+			if (err)
+				filter_free_pred(pred);
+		}
 		if (err)
 			return err;
 
diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c
index 90f13476483..75ef000613c 100644
--- a/kernel/trace/trace_functions.c
+++ b/kernel/trace/trace_functions.c
@@ -302,8 +302,7 @@ ftrace_trace_onoff_print(struct seq_file *m, unsigned long ip,
 	if (count == -1)
 		seq_printf(m, ":unlimited\n");
 	else
-		seq_printf(m, ":count=%ld", count);
-	seq_putc(m, '\n');
+		seq_printf(m, ":count=%ld\n", count);
 
 	return 0;
 }
@@ -364,7 +363,7 @@ ftrace_trace_onoff_callback(char *glob, char *cmd, char *param, int enable)
  out_reg:
 	ret = register_ftrace_function_probe(glob, ops, count);
 
-	return ret;
+	return ret < 0 ? ret : 0;
 }
 
 static struct ftrace_func_command ftrace_traceon_cmd = {
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index d2249abafb5..420ec348757 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -843,9 +843,16 @@ print_graph_function(struct trace_iterator *iter)
 
 	switch (entry->type) {
 	case TRACE_GRAPH_ENT: {
-		struct ftrace_graph_ent_entry *field;
+		/*
+		 * print_graph_entry() may consume the current event,
+		 * thus @field may become invalid, so we need to save it.
+		 * sizeof(struct ftrace_graph_ent_entry) is very small,
+		 * it can be safely saved at the stack.
+		 */
+		struct ftrace_graph_ent_entry *field, saved;
 		trace_assign_type(field, entry);
-		return print_graph_entry(field, s, iter);
+		saved = *field;
+		return print_graph_entry(&saved, s, iter);
 	}
 	case TRACE_GRAPH_RET: {
 		struct ftrace_graph_ret_entry *field;
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index 7938f3ae93e..e0c2545622e 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -27,8 +27,7 @@ void trace_print_seq(struct seq_file *m, struct trace_seq *s)
 {
 	int len = s->len >= PAGE_SIZE ? PAGE_SIZE - 1 : s->len;
 
-	s->buffer[len] = 0;
-	seq_puts(m, s->buffer);
+	seq_write(m, s->buffer, len);
 
 	trace_seq_init(s);
 }
diff --git a/kernel/trace/trace_printk.c b/kernel/trace/trace_printk.c
index 9bece9687b6..687699d365a 100644
--- a/kernel/trace/trace_printk.c
+++ b/kernel/trace/trace_printk.c
@@ -155,25 +155,19 @@ int __ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap)
 EXPORT_SYMBOL_GPL(__ftrace_vprintk);
 
 static void *
-t_next(struct seq_file *m, void *v, loff_t *pos)
+t_start(struct seq_file *m, loff_t *pos)
 {
-	const char **fmt = m->private;
-	const char **next = fmt;
-
-	(*pos)++;
+	const char **fmt = __start___trace_bprintk_fmt + *pos;
 
 	if ((unsigned long)fmt >= (unsigned long)__stop___trace_bprintk_fmt)
 		return NULL;
-
-	next = fmt;
-	m->private = ++next;
-
 	return fmt;
 }
 
-static void *t_start(struct seq_file *m, loff_t *pos)
+static void *t_next(struct seq_file *m, void * v, loff_t *pos)
 {
-	return t_next(m, NULL, pos);
+	(*pos)++;
+	return t_start(m, pos);
 }
 
 static int t_show(struct seq_file *m, void *v)
@@ -182,7 +176,7 @@ static int t_show(struct seq_file *m, void *v)
 	const char *str = *fmt;
 	int i;
 
-	seq_printf(m, "0x%lx : \"", (unsigned long)fmt);
+	seq_printf(m, "0x%lx : \"", *(unsigned long *)fmt);
 
 	/*
 	 * Tabs and new lines need to be converted.
@@ -224,15 +218,7 @@ static const struct seq_operations show_format_seq_ops = {
 static int
 ftrace_formats_open(struct inode *inode, struct file *file)
 {
-	int ret;
-
-	ret = seq_open(file, &show_format_seq_ops);
-	if (!ret) {
-		struct seq_file *m = file->private_data;
-
-		m->private = __start___trace_bprintk_fmt;
-	}
-	return ret;
+	return seq_open(file, &show_format_seq_ops);
 }
 
 static const struct file_operations ftrace_formats_fops = {
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index 2d7aebd71db..6a2a9d484cd 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -301,17 +301,14 @@ static const struct seq_operations stack_trace_seq_ops = {
 
 static int stack_trace_open(struct inode *inode, struct file *file)
 {
-	int ret;
-
-	ret = seq_open(file, &stack_trace_seq_ops);
-
-	return ret;
+	return seq_open(file, &stack_trace_seq_ops);
 }
 
 static const struct file_operations stack_trace_fops = {
 	.open		= stack_trace_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
+	.release	= seq_release,
 };
 
 int
@@ -326,10 +323,10 @@ stack_trace_sysctl(struct ctl_table *table, int write,
 	ret = proc_dointvec(table, write, file, buffer, lenp, ppos);
 
 	if (ret || !write ||
-	    (last_stack_tracer_enabled == stack_tracer_enabled))
+	    (last_stack_tracer_enabled == !!stack_tracer_enabled))
 		goto out;
 
-	last_stack_tracer_enabled = stack_tracer_enabled;
+	last_stack_tracer_enabled = !!stack_tracer_enabled;
 
 	if (stack_tracer_enabled)
 		register_ftrace_function(&trace_ops);
diff --git a/kernel/trace/trace_stat.c b/kernel/trace/trace_stat.c
index c00643733f4..aea321c82fa 100644
--- a/kernel/trace/trace_stat.c
+++ b/kernel/trace/trace_stat.c
@@ -73,7 +73,7 @@ static struct rb_node *release_next(struct rb_node *node)
 	}
 }
 
-static void reset_stat_session(struct stat_session *session)
+static void __reset_stat_session(struct stat_session *session)
 {
 	struct rb_node *node = session->stat_root.rb_node;
 
@@ -83,10 +83,17 @@ static void reset_stat_session(struct stat_session *session)
 	session->stat_root = RB_ROOT;
 }
 
+static void reset_stat_session(struct stat_session *session)
+{
+	mutex_lock(&session->stat_mutex);
+	__reset_stat_session(session);
+	mutex_unlock(&session->stat_mutex);
+}
+
 static void destroy_session(struct stat_session *session)
 {
 	debugfs_remove(session->file);
-	reset_stat_session(session);
+	__reset_stat_session(session);
 	mutex_destroy(&session->stat_mutex);
 	kfree(session);
 }
@@ -150,7 +157,7 @@ static int stat_seq_init(struct stat_session *session)
 	int i;
 
 	mutex_lock(&session->stat_mutex);
-	reset_stat_session(session);
+	__reset_stat_session(session);
 
 	if (!ts->stat_cmp)
 		ts->stat_cmp = dummy_cmp;
@@ -183,7 +190,7 @@ exit:
 	return ret;
 
 exit_free_rbtree:
-	reset_stat_session(session);
+	__reset_stat_session(session);
 	mutex_unlock(&session->stat_mutex);
 	return ret;
 }
@@ -199,17 +206,13 @@ static void *stat_seq_start(struct seq_file *s, loff_t *pos)
 	mutex_lock(&session->stat_mutex);
 
 	/* If we are in the beginning of the file, print the headers */
-	if (!*pos && session->ts->stat_headers) {
-		(*pos)++;
+	if (!*pos && session->ts->stat_headers)
 		return SEQ_START_TOKEN;
-	}
 
 	node = rb_first(&session->stat_root);
 	for (i = 0; node && i < *pos; i++)
 		node = rb_next(node);
 
-	(*pos)++;
-
 	return node;
 }
 
@@ -254,16 +257,21 @@ static const struct seq_operations trace_stat_seq_ops = {
 static int tracing_stat_open(struct inode *inode, struct file *file)
 {
 	int ret;
-
+	struct seq_file *m;
 	struct stat_session *session = inode->i_private;
 
+	ret = stat_seq_init(session);
+	if (ret)
+		return ret;
+
 	ret = seq_open(file, &trace_stat_seq_ops);
-	if (!ret) {
-		struct seq_file *m = file->private_data;
-		m->private = session;
-		ret = stat_seq_init(session);
+	if (ret) {
+		reset_stat_session(session);
+		return ret;
 	}
 
+	m = file->private_data;
+	m->private = session;
 	return ret;
 }
 
@@ -274,11 +282,9 @@ static int tracing_stat_release(struct inode *i, struct file *f)
 {
 	struct stat_session *session = i->i_private;
 
-	mutex_lock(&session->stat_mutex);
 	reset_stat_session(session);
-	mutex_unlock(&session->stat_mutex);
 
-	return 0;
+	return seq_release(i, f);
 }
 
 static const struct file_operations tracing_stat_fops = {
diff --git a/kernel/wait.c b/kernel/wait.c
index ea7c3b4275c..c4bd3d825f3 100644
--- a/kernel/wait.c
+++ b/kernel/wait.c
@@ -10,13 +10,14 @@
 #include <linux/wait.h>
 #include <linux/hash.h>
 
-void init_waitqueue_head(wait_queue_head_t *q)
+void __init_waitqueue_head(wait_queue_head_t *q, struct lock_class_key *key)
 {
 	spin_lock_init(&q->lock);
+	lockdep_set_class(&q->lock, key);
 	INIT_LIST_HEAD(&q->task_list);
 }
 
-EXPORT_SYMBOL(init_waitqueue_head);
+EXPORT_SYMBOL(__init_waitqueue_head);
 
 void add_wait_queue(wait_queue_head_t *q, wait_queue_t *wait)
 {
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 4c32b1a1a06..12327b2bb78 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -359,6 +359,18 @@ config DEBUG_KMEMLEAK
 	  In order to access the kmemleak file, debugfs needs to be
 	  mounted (usually at /sys/kernel/debug).
 
+config DEBUG_KMEMLEAK_EARLY_LOG_SIZE
+	int "Maximum kmemleak early log entries"
+	depends on DEBUG_KMEMLEAK
+	range 200 2000
+	default 400
+	help
+	  Kmemleak must track all the memory allocations to avoid
+	  reporting false positives. Since memory may be allocated or
+	  freed before kmemleak is initialised, an early log buffer is
+	  used to store these actions. If kmemleak reports "early log
+	  buffer exceeded", please increase this value.
+
 config DEBUG_KMEMLEAK_TEST
 	tristate "Simple test for the kernel memory leak detector"
 	depends on DEBUG_KMEMLEAK
diff --git a/lib/Makefile b/lib/Makefile
index b6d1857bbf0..2e78277eff9 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -12,7 +12,7 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \
 	 idr.o int_sqrt.o extable.o prio_tree.o \
 	 sha1.o irq_regs.o reciprocal_div.o argv_split.o \
 	 proportions.o prio_heap.o ratelimit.o show_mem.o \
-	 is_single_threaded.o plist.o decompress.o
+	 is_single_threaded.o plist.o decompress.o flex_array.o
 
 lib-$(CONFIG_MMU) += ioremap.o
 lib-$(CONFIG_SMP) += cpumask.o
diff --git a/lib/atomic64.c b/lib/atomic64.c
index c5e72556241..8bee16ec752 100644
--- a/lib/atomic64.c
+++ b/lib/atomic64.c
@@ -13,6 +13,7 @@
 #include <linux/cache.h>
 #include <linux/spinlock.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <asm/atomic.h>
 
 /*
@@ -52,6 +53,7 @@ long long atomic64_read(const atomic64_t *v)
 	spin_unlock_irqrestore(lock, flags);
 	return val;
 }
+EXPORT_SYMBOL(atomic64_read);
 
 void atomic64_set(atomic64_t *v, long long i)
 {
@@ -62,6 +64,7 @@ void atomic64_set(atomic64_t *v, long long i)
 	v->counter = i;
 	spin_unlock_irqrestore(lock, flags);
 }
+EXPORT_SYMBOL(atomic64_set);
 
 void atomic64_add(long long a, atomic64_t *v)
 {
@@ -72,6 +75,7 @@ void atomic64_add(long long a, atomic64_t *v)
 	v->counter += a;
 	spin_unlock_irqrestore(lock, flags);
 }
+EXPORT_SYMBOL(atomic64_add);
 
 long long atomic64_add_return(long long a, atomic64_t *v)
 {
@@ -84,6 +88,7 @@ long long atomic64_add_return(long long a, atomic64_t *v)
 	spin_unlock_irqrestore(lock, flags);
 	return val;
 }
+EXPORT_SYMBOL(atomic64_add_return);
 
 void atomic64_sub(long long a, atomic64_t *v)
 {
@@ -94,6 +99,7 @@ void atomic64_sub(long long a, atomic64_t *v)
 	v->counter -= a;
 	spin_unlock_irqrestore(lock, flags);
 }
+EXPORT_SYMBOL(atomic64_sub);
 
 long long atomic64_sub_return(long long a, atomic64_t *v)
 {
@@ -106,6 +112,7 @@ long long atomic64_sub_return(long long a, atomic64_t *v)
 	spin_unlock_irqrestore(lock, flags);
 	return val;
 }
+EXPORT_SYMBOL(atomic64_sub_return);
 
 long long atomic64_dec_if_positive(atomic64_t *v)
 {
@@ -120,6 +127,7 @@ long long atomic64_dec_if_positive(atomic64_t *v)
 	spin_unlock_irqrestore(lock, flags);
 	return val;
 }
+EXPORT_SYMBOL(atomic64_dec_if_positive);
 
 long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n)
 {
@@ -134,6 +142,7 @@ long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n)
 	spin_unlock_irqrestore(lock, flags);
 	return val;
 }
+EXPORT_SYMBOL(atomic64_cmpxchg);
 
 long long atomic64_xchg(atomic64_t *v, long long new)
 {
@@ -147,6 +156,7 @@ long long atomic64_xchg(atomic64_t *v, long long new)
 	spin_unlock_irqrestore(lock, flags);
 	return val;
 }
+EXPORT_SYMBOL(atomic64_xchg);
 
 int atomic64_add_unless(atomic64_t *v, long long a, long long u)
 {
@@ -162,6 +172,7 @@ int atomic64_add_unless(atomic64_t *v, long long a, long long u)
 	spin_unlock_irqrestore(lock, flags);
 	return ret;
 }
+EXPORT_SYMBOL(atomic64_add_unless);
 
 static int init_atomic64_lock(void)
 {
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 35a1f7ff414..702565821c9 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -179,14 +179,16 @@ void __bitmap_shift_left(unsigned long *dst,
 }
 EXPORT_SYMBOL(__bitmap_shift_left);
 
-void __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
+int __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
 				const unsigned long *bitmap2, int bits)
 {
 	int k;
 	int nr = BITS_TO_LONGS(bits);
+	unsigned long result = 0;
 
 	for (k = 0; k < nr; k++)
-		dst[k] = bitmap1[k] & bitmap2[k];
+		result |= (dst[k] = bitmap1[k] & bitmap2[k]);
+	return result != 0;
 }
 EXPORT_SYMBOL(__bitmap_and);
 
@@ -212,14 +214,16 @@ void __bitmap_xor(unsigned long *dst, const unsigned long *bitmap1,
 }
 EXPORT_SYMBOL(__bitmap_xor);
 
-void __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
+int __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
 				const unsigned long *bitmap2, int bits)
 {
 	int k;
 	int nr = BITS_TO_LONGS(bits);
+	unsigned long result = 0;
 
 	for (k = 0; k < nr; k++)
-		dst[k] = bitmap1[k] & ~bitmap2[k];
+		result |= (dst[k] = bitmap1[k] & ~bitmap2[k]);
+	return result != 0;
 }
 EXPORT_SYMBOL(__bitmap_andnot);
 
diff --git a/lib/decompress_bunzip2.c b/lib/decompress_bunzip2.c
index 708e2a86d87..600f473a561 100644
--- a/lib/decompress_bunzip2.c
+++ b/lib/decompress_bunzip2.c
@@ -45,12 +45,14 @@
 */
 
 
-#ifndef STATIC
+#ifdef STATIC
+#define PREBOOT
+#else
 #include <linux/decompress/bunzip2.h>
-#endif /* !STATIC */
+#include <linux/slab.h>
+#endif /* STATIC */
 
 #include <linux/decompress/mm.h>
-#include <linux/slab.h>
 
 #ifndef INT_MAX
 #define INT_MAX 0x7fffffff
@@ -681,9 +683,7 @@ STATIC int INIT bunzip2(unsigned char *buf, int len,
 	set_error_fn(error_fn);
 	if (flush)
 		outbuf = malloc(BZIP2_IOBUF_SIZE);
-	else
-		len -= 4; /* Uncompressed size hack active in pre-boot
-			     environment */
+
 	if (!outbuf) {
 		error("Could not allocate output bufer");
 		return -1;
@@ -733,4 +733,14 @@ exit_0:
 	return i;
 }
 
-#define decompress bunzip2
+#ifdef PREBOOT
+STATIC int INIT decompress(unsigned char *buf, int len,
+			int(*fill)(void*, unsigned int),
+			int(*flush)(void*, unsigned int),
+			unsigned char *outbuf,
+			int *pos,
+			void(*error_fn)(char *x))
+{
+	return bunzip2(buf, len - 4, fill, flush, outbuf, pos, error_fn);
+}
+#endif
diff --git a/lib/decompress_inflate.c b/lib/decompress_inflate.c
index e36b296fc9f..68dfce59c1b 100644
--- a/lib/decompress_inflate.c
+++ b/lib/decompress_inflate.c
@@ -19,13 +19,13 @@
 #include "zlib_inflate/inflate.h"
 
 #include "zlib_inflate/infutil.h"
+#include <linux/slab.h>
 
 #endif /* STATIC */
 
 #include <linux/decompress/mm.h>
-#include <linux/slab.h>
 
-#define INBUF_LEN (16*1024)
+#define GZIP_IOBUF_SIZE (16*1024)
 
 /* Included from initramfs et al code */
 STATIC int INIT gunzip(unsigned char *buf, int len,
@@ -55,7 +55,7 @@ STATIC int INIT gunzip(unsigned char *buf, int len,
 	if (buf)
 		zbuf = buf;
 	else {
-		zbuf = malloc(INBUF_LEN);
+		zbuf = malloc(GZIP_IOBUF_SIZE);
 		len = 0;
 	}
 	if (!zbuf) {
@@ -77,7 +77,7 @@ STATIC int INIT gunzip(unsigned char *buf, int len,
 	}
 
 	if (len == 0)
-		len = fill(zbuf, INBUF_LEN);
+		len = fill(zbuf, GZIP_IOBUF_SIZE);
 
 	/* verify the gzip header */
 	if (len < 10 ||
@@ -113,7 +113,7 @@ STATIC int INIT gunzip(unsigned char *buf, int len,
 	while (rc == Z_OK) {
 		if (strm->avail_in == 0) {
 			/* TODO: handle case where both pos and fill are set */
-			len = fill(zbuf, INBUF_LEN);
+			len = fill(zbuf, GZIP_IOBUF_SIZE);
 			if (len < 0) {
 				rc = -1;
 				error("read error");
diff --git a/lib/decompress_unlzma.c b/lib/decompress_unlzma.c
index 32123a1340e..0b954e04bd3 100644
--- a/lib/decompress_unlzma.c
+++ b/lib/decompress_unlzma.c
@@ -29,12 +29,14 @@
  *Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#ifndef STATIC
+#ifdef STATIC
+#define PREBOOT
+#else
 #include <linux/decompress/unlzma.h>
+#include <linux/slab.h>
 #endif /* STATIC */
 
 #include <linux/decompress/mm.h>
-#include <linux/slab.h>
 
 #define	MIN(a, b) (((a) < (b)) ? (a) : (b))
 
@@ -543,9 +545,7 @@ STATIC inline int INIT unlzma(unsigned char *buf, int in_len,
 	int ret = -1;
 
 	set_error_fn(error_fn);
-	if (!flush)
-		in_len -= 4; /* Uncompressed size hack active in pre-boot
-				environment */
+
 	if (buf)
 		inbuf = buf;
 	else
@@ -645,4 +645,15 @@ exit_0:
 	return ret;
 }
 
-#define decompress unlzma
+#ifdef PREBOOT
+STATIC int INIT decompress(unsigned char *buf, int in_len,
+			      int(*fill)(void*, unsigned int),
+			      int(*flush)(void*, unsigned int),
+			      unsigned char *output,
+			      int *posp,
+			      void(*error_fn)(char *x)
+	)
+{
+	return unlzma(buf, in_len - 4, fill, flush, output, posp, error_fn);
+}
+#endif
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index 3b93129a968..58a9f9fc609 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -156,9 +156,13 @@ static bool driver_filter(struct device *dev)
 		return true;
 
 	/* driver filter on and initialized */
-	if (current_driver && dev->driver == current_driver)
+	if (current_driver && dev && dev->driver == current_driver)
 		return true;
 
+	/* driver filter on, but we can't filter on a NULL device... */
+	if (!dev)
+		return false;
+
 	if (current_driver || !current_driver_name[0])
 		return false;
 
@@ -183,17 +187,17 @@ static bool driver_filter(struct device *dev)
 	return ret;
 }
 
-#define err_printk(dev, entry, format, arg...) do {		\
-		error_count += 1;				\
-		if (driver_filter(dev) &&			\
-		    (show_all_errors || show_num_errors > 0)) {	\
-			WARN(1, "%s %s: " format,		\
-			     dev_driver_string(dev),		\
-			     dev_name(dev) , ## arg);		\
-			dump_entry_trace(entry);		\
-		}						\
-		if (!show_all_errors && show_num_errors > 0)	\
-			show_num_errors -= 1;			\
+#define err_printk(dev, entry, format, arg...) do {			\
+		error_count += 1;					\
+		if (driver_filter(dev) &&				\
+		    (show_all_errors || show_num_errors > 0)) {		\
+			WARN(1, "%s %s: " format,			\
+			     dev ? dev_driver_string(dev) : "NULL",	\
+			     dev ? dev_name(dev) : "NULL", ## arg);	\
+			dump_entry_trace(entry);			\
+		}							\
+		if (!show_all_errors && show_num_errors > 0)		\
+			show_num_errors -= 1;				\
 	} while (0);
 
 /*
@@ -716,7 +720,7 @@ void dma_debug_init(u32 num_entries)
 
 	for (i = 0; i < HASH_SIZE; ++i) {
 		INIT_LIST_HEAD(&dma_entry_hash[i].list);
-		dma_entry_hash[i].lock = SPIN_LOCK_UNLOCKED;
+		spin_lock_init(&dma_entry_hash[i].lock);
 	}
 
 	if (dma_debug_fs_init() != 0) {
@@ -856,22 +860,21 @@ static void check_for_stack(struct device *dev, void *addr)
 				"stack [addr=%p]\n", addr);
 }
 
-static inline bool overlap(void *addr, u64 size, void *start, void *end)
+static inline bool overlap(void *addr, unsigned long len, void *start, void *end)
 {
-	void *addr2 = (char *)addr + size;
+	unsigned long a1 = (unsigned long)addr;
+	unsigned long b1 = a1 + len;
+	unsigned long a2 = (unsigned long)start;
+	unsigned long b2 = (unsigned long)end;
 
-	return ((addr >= start && addr < end) ||
-		(addr2 >= start && addr2 < end) ||
-		((addr < start) && (addr2 >= end)));
+	return !(b1 <= a2 || a1 >= b2);
 }
 
-static void check_for_illegal_area(struct device *dev, void *addr, u64 size)
+static void check_for_illegal_area(struct device *dev, void *addr, unsigned long len)
 {
-	if (overlap(addr, size, _text, _etext) ||
-	    overlap(addr, size, __start_rodata, __end_rodata))
-		err_printk(dev, NULL, "DMA-API: device driver maps "
-				"memory from kernel text or rodata "
-				"[addr=%p] [size=%llu]\n", addr, size);
+	if (overlap(addr, len, _text, _etext) ||
+	    overlap(addr, len, __start_rodata, __end_rodata))
+		err_printk(dev, NULL, "DMA-API: device driver maps memory from kernel text or rodata [addr=%p] [len=%lu]\n", addr, len);
 }
 
 static void check_sync(struct device *dev,
@@ -969,7 +972,8 @@ void debug_dma_map_page(struct device *dev, struct page *page, size_t offset,
 		entry->type = dma_debug_single;
 
 	if (!PageHighMem(page)) {
-		void *addr = ((char *)page_address(page)) + offset;
+		void *addr = page_address(page) + offset;
+
 		check_for_stack(dev, addr);
 		check_for_illegal_area(dev, addr, size);
 	}
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 833139ce1e2..e22c148e4b7 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -164,7 +164,7 @@ static void ddebug_change(const struct ddebug_query *query,
 
 			if (!newflags)
 				dt->num_enabled--;
-			else if (!dp-flags)
+			else if (!dp->flags)
 				dt->num_enabled++;
 			dp->flags = newflags;
 			if (newflags) {
diff --git a/lib/flex_array.c b/lib/flex_array.c
new file mode 100644
index 00000000000..7baed2fc3bc
--- /dev/null
+++ b/lib/flex_array.c
@@ -0,0 +1,268 @@
+/*
+ * Flexible array managed in PAGE_SIZE parts
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2009
+ *
+ * Author: Dave Hansen <dave@linux.vnet.ibm.com>
+ */
+
+#include <linux/flex_array.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+
+struct flex_array_part {
+	char elements[FLEX_ARRAY_PART_SIZE];
+};
+
+static inline int __elements_per_part(int element_size)
+{
+	return FLEX_ARRAY_PART_SIZE / element_size;
+}
+
+static inline int bytes_left_in_base(void)
+{
+	int element_offset = offsetof(struct flex_array, parts);
+	int bytes_left = FLEX_ARRAY_BASE_SIZE - element_offset;
+	return bytes_left;
+}
+
+static inline int nr_base_part_ptrs(void)
+{
+	return bytes_left_in_base() / sizeof(struct flex_array_part *);
+}
+
+/*
+ * If a user requests an allocation which is small
+ * enough, we may simply use the space in the
+ * flex_array->parts[] array to store the user
+ * data.
+ */
+static inline int elements_fit_in_base(struct flex_array *fa)
+{
+	int data_size = fa->element_size * fa->total_nr_elements;
+	if (data_size <= bytes_left_in_base())
+		return 1;
+	return 0;
+}
+
+/**
+ * flex_array_alloc - allocate a new flexible array
+ * @element_size:	the size of individual elements in the array
+ * @total:		total number of elements that this should hold
+ *
+ * Note: all locking must be provided by the caller.
+ *
+ * @total is used to size internal structures.  If the user ever
+ * accesses any array indexes >=@total, it will produce errors.
+ *
+ * The maximum number of elements is defined as: the number of
+ * elements that can be stored in a page times the number of
+ * page pointers that we can fit in the base structure or (using
+ * integer math):
+ *
+ * 	(PAGE_SIZE/element_size) * (PAGE_SIZE-8)/sizeof(void *)
+ *
+ * Here's a table showing example capacities.  Note that the maximum
+ * index that the get/put() functions is just nr_objects-1.   This
+ * basically means that you get 4MB of storage on 32-bit and 2MB on
+ * 64-bit.
+ *
+ *
+ * Element size | Objects | Objects |
+ * PAGE_SIZE=4k |  32-bit |  64-bit |
+ * ---------------------------------|
+ *      1 bytes | 4186112 | 2093056 |
+ *      2 bytes | 2093056 | 1046528 |
+ *      3 bytes | 1395030 |  697515 |
+ *      4 bytes | 1046528 |  523264 |
+ *     32 bytes |  130816 |   65408 |
+ *     33 bytes |  126728 |   63364 |
+ *   2048 bytes |    2044 |    1022 |
+ *   2049 bytes |    1022 |     511 |
+ *       void * | 1046528 |  261632 |
+ *
+ * Since 64-bit pointers are twice the size, we lose half the
+ * capacity in the base structure.  Also note that no effort is made
+ * to efficiently pack objects across page boundaries.
+ */
+struct flex_array *flex_array_alloc(int element_size, unsigned int total,
+					gfp_t flags)
+{
+	struct flex_array *ret;
+	int max_size = nr_base_part_ptrs() * __elements_per_part(element_size);
+
+	/* max_size will end up 0 if element_size > PAGE_SIZE */
+	if (total > max_size)
+		return NULL;
+	ret = kzalloc(sizeof(struct flex_array), flags);
+	if (!ret)
+		return NULL;
+	ret->element_size = element_size;
+	ret->total_nr_elements = total;
+	return ret;
+}
+
+static int fa_element_to_part_nr(struct flex_array *fa,
+					unsigned int element_nr)
+{
+	return element_nr / __elements_per_part(fa->element_size);
+}
+
+/**
+ * flex_array_free_parts - just free the second-level pages
+ *
+ * This is to be used in cases where the base 'struct flex_array'
+ * has been statically allocated and should not be free.
+ */
+void flex_array_free_parts(struct flex_array *fa)
+{
+	int part_nr;
+	int max_part = nr_base_part_ptrs();
+
+	if (elements_fit_in_base(fa))
+		return;
+	for (part_nr = 0; part_nr < max_part; part_nr++)
+		kfree(fa->parts[part_nr]);
+}
+
+void flex_array_free(struct flex_array *fa)
+{
+	flex_array_free_parts(fa);
+	kfree(fa);
+}
+
+static unsigned int index_inside_part(struct flex_array *fa,
+					unsigned int element_nr)
+{
+	unsigned int part_offset;
+
+	part_offset = element_nr % __elements_per_part(fa->element_size);
+	return part_offset * fa->element_size;
+}
+
+static struct flex_array_part *
+__fa_get_part(struct flex_array *fa, int part_nr, gfp_t flags)
+{
+	struct flex_array_part *part = fa->parts[part_nr];
+	if (!part) {
+		/*
+		 * This leaves the part pages uninitialized
+		 * and with potentially random data, just
+		 * as if the user had kmalloc()'d the whole.
+		 * __GFP_ZERO can be used to zero it.
+		 */
+		part = kmalloc(FLEX_ARRAY_PART_SIZE, flags);
+		if (!part)
+			return NULL;
+		fa->parts[part_nr] = part;
+	}
+	return part;
+}
+
+/**
+ * flex_array_put - copy data into the array at @element_nr
+ * @src:	address of data to copy into the array
+ * @element_nr:	index of the position in which to insert
+ * 		the new element.
+ *
+ * Note that this *copies* the contents of @src into
+ * the array.  If you are trying to store an array of
+ * pointers, make sure to pass in &ptr instead of ptr.
+ *
+ * Locking must be provided by the caller.
+ */
+int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,
+			gfp_t flags)
+{
+	int part_nr = fa_element_to_part_nr(fa, element_nr);
+	struct flex_array_part *part;
+	void *dst;
+
+	if (element_nr >= fa->total_nr_elements)
+		return -ENOSPC;
+	if (elements_fit_in_base(fa))
+		part = (struct flex_array_part *)&fa->parts[0];
+	else {
+		part = __fa_get_part(fa, part_nr, flags);
+		if (!part)
+			return -ENOMEM;
+	}
+	dst = &part->elements[index_inside_part(fa, element_nr)];
+	memcpy(dst, src, fa->element_size);
+	return 0;
+}
+
+/**
+ * flex_array_prealloc - guarantee that array space exists
+ * @start:	index of first array element for which space is allocated
+ * @end:	index of last (inclusive) element for which space is allocated
+ *
+ * This will guarantee that no future calls to flex_array_put()
+ * will allocate memory.  It can be used if you are expecting to
+ * be holding a lock or in some atomic context while writing
+ * data into the array.
+ *
+ * Locking must be provided by the caller.
+ */
+int flex_array_prealloc(struct flex_array *fa, unsigned int start,
+			unsigned int end, gfp_t flags)
+{
+	int start_part;
+	int end_part;
+	int part_nr;
+	struct flex_array_part *part;
+
+	if (start >= fa->total_nr_elements || end >= fa->total_nr_elements)
+		return -ENOSPC;
+	if (elements_fit_in_base(fa))
+		return 0;
+	start_part = fa_element_to_part_nr(fa, start);
+	end_part = fa_element_to_part_nr(fa, end);
+	for (part_nr = start_part; part_nr <= end_part; part_nr++) {
+		part = __fa_get_part(fa, part_nr, flags);
+		if (!part)
+			return -ENOMEM;
+	}
+	return 0;
+}
+
+/**
+ * flex_array_get - pull data back out of the array
+ * @element_nr:	index of the element to fetch from the array
+ *
+ * Returns a pointer to the data at index @element_nr.  Note
+ * that this is a copy of the data that was passed in.  If you
+ * are using this to store pointers, you'll get back &ptr.
+ *
+ * Locking must be provided by the caller.
+ */
+void *flex_array_get(struct flex_array *fa, unsigned int element_nr)
+{
+	int part_nr = fa_element_to_part_nr(fa, element_nr);
+	struct flex_array_part *part;
+
+	if (element_nr >= fa->total_nr_elements)
+		return NULL;
+	if (elements_fit_in_base(fa))
+		part = (struct flex_array_part *)&fa->parts[0];
+	else {
+		part = fa->parts[part_nr];
+		if (!part)
+			return NULL;
+	}
+	return &part->elements[index_inside_part(fa, element_nr)];
+}
diff --git a/lib/lmb.c b/lib/lmb.c
index e4a6482d8b2..0343c05609f 100644
--- a/lib/lmb.c
+++ b/lib/lmb.c
@@ -429,7 +429,7 @@ u64 __init lmb_phys_mem_size(void)
 	return lmb.memory.size;
 }
 
-u64 __init lmb_end_of_DRAM(void)
+u64 lmb_end_of_DRAM(void)
 {
 	int idx = lmb.memory.cnt - 1;
 
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index a295e404e90..0d475d8167b 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -314,6 +314,7 @@ void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
 	miter->__sg = sgl;
 	miter->__nents = nents;
 	miter->__offset = 0;
+	WARN_ON(!(flags & (SG_MITER_TO_SG | SG_MITER_FROM_SG)));
 	miter->__flags = flags;
 }
 EXPORT_SYMBOL(sg_miter_start);
@@ -394,6 +395,9 @@ void sg_miter_stop(struct sg_mapping_iter *miter)
 	if (miter->addr) {
 		miter->__offset += miter->consumed;
 
+		if (miter->__flags & SG_MITER_TO_SG)
+			flush_kernel_dcache_page(miter->page);
+
 		if (miter->__flags & SG_MITER_ATOMIC) {
 			WARN_ON(!irqs_disabled());
 			kunmap_atomic(miter->addr, KM_BIO_SRC_IRQ);
@@ -426,8 +430,14 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 	unsigned int offset = 0;
 	struct sg_mapping_iter miter;
 	unsigned long flags;
+	unsigned int sg_flags = SG_MITER_ATOMIC;
+
+	if (to_buffer)
+		sg_flags |= SG_MITER_FROM_SG;
+	else
+		sg_flags |= SG_MITER_TO_SG;
 
-	sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
+	sg_miter_start(&miter, sgl, nents, sg_flags);
 
 	local_irq_save(flags);
 
@@ -438,10 +448,8 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 
 		if (to_buffer)
 			memcpy(buf + offset, miter.addr, len);
-		else {
+		else
 			memcpy(miter.addr, buf + offset, len);
-			flush_kernel_dcache_page(miter.page);
-		}
 
 		offset += len;
 	}
diff --git a/mm/Kconfig b/mm/Kconfig
index c948d4ca8bd..fe5f674d7a7 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -225,9 +225,9 @@ config DEFAULT_MMAP_MIN_ADDR
 	  For most ia64, ppc64 and x86 users with lots of address space
 	  a value of 65536 is reasonable and should cause no problems.
 	  On arm and other archs it should not be higher than 32768.
-	  Programs which use vm86 functionality would either need additional
-	  permissions from either the LSM or the capabilities module or have
-	  this protection disabled.
+	  Programs which use vm86 functionality or have some need to map
+	  this low address space will need CAP_SYS_RAWIO or disable this
+	  protection by setting the value to 0.
 
 	  This value can be changed after boot using the
 	  /proc/sys/vm/mmap_min_addr tunable.
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 493b468a503..c86edd24429 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -283,7 +283,6 @@ static wait_queue_head_t congestion_wqh[2] = {
 		__WAIT_QUEUE_HEAD_INITIALIZER(congestion_wqh[1])
 	};
 
-
 void clear_bdi_congested(struct backing_dev_info *bdi, int sync)
 {
 	enum bdi_state bit;
@@ -308,18 +307,18 @@ EXPORT_SYMBOL(set_bdi_congested);
 
 /**
  * congestion_wait - wait for a backing_dev to become uncongested
- * @rw: READ or WRITE
+ * @sync: SYNC or ASYNC IO
  * @timeout: timeout in jiffies
  *
  * Waits for up to @timeout jiffies for a backing_dev (any backing_dev) to exit
  * write congestion.  If no backing_devs are congested then just wait for the
  * next write to be completed.
  */
-long congestion_wait(int rw, long timeout)
+long congestion_wait(int sync, long timeout)
 {
 	long ret;
 	DEFINE_WAIT(wait);
-	wait_queue_head_t *wqh = &congestion_wqh[rw];
+	wait_queue_head_t *wqh = &congestion_wqh[sync];
 
 	prepare_to_wait(wqh, &wait, TASK_UNINTERRUPTIBLE);
 	ret = io_schedule_timeout(timeout);
diff --git a/mm/bootmem.c b/mm/bootmem.c
index d2a9ce95276..701740c9e81 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -12,6 +12,7 @@
 #include <linux/pfn.h>
 #include <linux/bootmem.h>
 #include <linux/module.h>
+#include <linux/kmemleak.h>
 
 #include <asm/bug.h>
 #include <asm/io.h>
@@ -335,6 +336,8 @@ void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
 {
 	unsigned long start, end;
 
+	kmemleak_free_part(__va(physaddr), size);
+
 	start = PFN_UP(physaddr);
 	end = PFN_DOWN(physaddr + size);
 
@@ -354,6 +357,8 @@ void __init free_bootmem(unsigned long addr, unsigned long size)
 {
 	unsigned long start, end;
 
+	kmemleak_free_part(__va(addr), size);
+
 	start = PFN_UP(addr);
 	end = PFN_DOWN(addr + size);
 
@@ -516,6 +521,7 @@ find_block:
 		region = phys_to_virt(PFN_PHYS(bdata->node_min_pfn) +
 				start_off);
 		memset(region, 0, size);
+		kmemleak_alloc(region, size, 1, 0);
 		return region;
 	}
 
diff --git a/mm/dmapool.c b/mm/dmapool.c
index b1f0885dda2..3df063706f5 100644
--- a/mm/dmapool.c
+++ b/mm/dmapool.c
@@ -86,10 +86,12 @@ show_pools(struct device *dev, struct device_attribute *attr, char *buf)
 		unsigned pages = 0;
 		unsigned blocks = 0;
 
+		spin_lock_irq(&pool->lock);
 		list_for_each_entry(page, &pool->page_list, page_list) {
 			pages++;
 			blocks += page->in_use;
 		}
+		spin_unlock_irq(&pool->lock);
 
 		/* per-pool info, no real statistics yet */
 		temp = scnprintf(next, size, "%-16s %4u %4Zu %4Zu %2u\n",
diff --git a/mm/filemap.c b/mm/filemap.c
index 22396713feb..ccea3b665c1 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2272,6 +2272,7 @@ again:
 		pagefault_enable();
 		flush_dcache_page(page);
 
+		mark_page_accessed(page);
 		status = a_ops->write_end(file, mapping, pos, bytes, copied,
 						page, fsdata);
 		if (unlikely(status < 0))
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index d0351e31f47..cafdcee154e 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2370,7 +2370,7 @@ void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed)
 	long chg = region_truncate(&inode->i_mapping->private_list, offset);
 
 	spin_lock(&inode->i_lock);
-	inode->i_blocks -= blocks_per_huge_page(h);
+	inode->i_blocks -= (blocks_per_huge_page(h) * freed);
 	spin_unlock(&inode->i_lock);
 
 	hugetlb_put_quota(inode->i_mapping, (chg - freed));
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index c96f2c8700a..487267310a8 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -48,10 +48,10 @@
  *   scanned. This list is only modified during a scanning episode when the
  *   scan_mutex is held. At the end of a scan, the gray_list is always empty.
  *   Note that the kmemleak_object.use_count is incremented when an object is
- *   added to the gray_list and therefore cannot be freed
- * - kmemleak_mutex (mutex): prevents multiple users of the "kmemleak" debugfs
- *   file together with modifications to the memory scanning parameters
- *   including the scan_thread pointer
+ *   added to the gray_list and therefore cannot be freed. This mutex also
+ *   prevents multiple users of the "kmemleak" debugfs file together with
+ *   modifications to the memory scanning parameters including the scan_thread
+ *   pointer
  *
  * The kmemleak_object structures have a use_count incremented or decremented
  * using the get_object()/put_object() functions. When the use_count becomes
@@ -103,11 +103,10 @@
  * Kmemleak configuration and common defines.
  */
 #define MAX_TRACE		16	/* stack trace length */
-#define REPORTS_NR		50	/* maximum number of reported leaks */
 #define MSECS_MIN_AGE		5000	/* minimum object age for reporting */
-#define MSECS_SCAN_YIELD	10	/* CPU yielding period */
 #define SECS_FIRST_SCAN		60	/* delay before the first scan */
 #define SECS_SCAN_WAIT		600	/* subsequent auto scanning delay */
+#define GRAY_LIST_PASSES	25	/* maximum number of gray list scans */
 
 #define BYTES_PER_POINTER	sizeof(void *)
 
@@ -159,6 +158,8 @@ struct kmemleak_object {
 #define OBJECT_REPORTED		(1 << 1)
 /* flag set to not scan the object */
 #define OBJECT_NO_SCAN		(1 << 2)
+/* flag set on newly allocated objects */
+#define OBJECT_NEW		(1 << 3)
 
 /* the list of all allocated objects */
 static LIST_HEAD(object_list);
@@ -186,22 +187,16 @@ static atomic_t kmemleak_error = ATOMIC_INIT(0);
 static unsigned long min_addr = ULONG_MAX;
 static unsigned long max_addr;
 
-/* used for yielding the CPU to other tasks during scanning */
-static unsigned long next_scan_yield;
 static struct task_struct *scan_thread;
-static unsigned long jiffies_scan_yield;
+/* used to avoid reporting of recently allocated objects */
 static unsigned long jiffies_min_age;
+static unsigned long jiffies_last_scan;
 /* delay between automatic memory scannings */
 static signed long jiffies_scan_wait;
 /* enables or disables the task stacks scanning */
-static int kmemleak_stack_scan;
-/* mutex protecting the memory scanning */
+static int kmemleak_stack_scan = 1;
+/* protects the memory scanning, parameters and debug/kmemleak file access */
 static DEFINE_MUTEX(scan_mutex);
-/* mutex protecting the access to the /sys/kernel/debug/kmemleak file */
-static DEFINE_MUTEX(kmemleak_mutex);
-
-/* number of leaks reported (for limitation purposes) */
-static int reported_leaks;
 
 /*
  * Early object allocation/freeing logging. Kmemleak is initialized after the
@@ -215,6 +210,7 @@ static int reported_leaks;
 enum {
 	KMEMLEAK_ALLOC,
 	KMEMLEAK_FREE,
+	KMEMLEAK_FREE_PART,
 	KMEMLEAK_NOT_LEAK,
 	KMEMLEAK_IGNORE,
 	KMEMLEAK_SCAN_AREA,
@@ -235,7 +231,7 @@ struct early_log {
 };
 
 /* early logging buffer and current position */
-static struct early_log early_log[200];
+static struct early_log early_log[CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE];
 static int crt_early_log;
 
 static void kmemleak_disable(void);
@@ -278,13 +274,9 @@ static int color_gray(const struct kmemleak_object *object)
 	return object->min_count != -1 && object->count >= object->min_count;
 }
 
-/*
- * Objects are considered referenced if their color is gray and they have not
- * been deleted.
- */
-static int referenced_object(struct kmemleak_object *object)
+static int color_black(const struct kmemleak_object *object)
 {
-	return (object->flags & OBJECT_ALLOCATED) && color_gray(object);
+	return object->min_count == -1;
 }
 
 /*
@@ -295,42 +287,28 @@ static int referenced_object(struct kmemleak_object *object)
 static int unreferenced_object(struct kmemleak_object *object)
 {
 	return (object->flags & OBJECT_ALLOCATED) && color_white(object) &&
-		time_is_before_eq_jiffies(object->jiffies + jiffies_min_age);
+		time_before_eq(object->jiffies + jiffies_min_age,
+			       jiffies_last_scan);
 }
 
 /*
- * Printing of the (un)referenced objects information, either to the seq file
- * or to the kernel log. The print_referenced/print_unreferenced functions
- * must be called with the object->lock held.
+ * Printing of the unreferenced objects information to the seq file. The
+ * print_unreferenced function must be called with the object->lock held.
  */
-#define print_helper(seq, x...)	do {	\
-	struct seq_file *s = (seq);	\
-	if (s)				\
-		seq_printf(s, x);	\
-	else				\
-		pr_info(x);		\
-} while (0)
-
-static void print_referenced(struct kmemleak_object *object)
-{
-	pr_info("referenced object 0x%08lx (size %zu)\n",
-		object->pointer, object->size);
-}
-
 static void print_unreferenced(struct seq_file *seq,
 			       struct kmemleak_object *object)
 {
 	int i;
 
-	print_helper(seq, "unreferenced object 0x%08lx (size %zu):\n",
-		     object->pointer, object->size);
-	print_helper(seq, "  comm \"%s\", pid %d, jiffies %lu\n",
-		     object->comm, object->pid, object->jiffies);
-	print_helper(seq, "  backtrace:\n");
+	seq_printf(seq, "unreferenced object 0x%08lx (size %zu):\n",
+		   object->pointer, object->size);
+	seq_printf(seq, "  comm \"%s\", pid %d, jiffies %lu\n",
+		   object->comm, object->pid, object->jiffies);
+	seq_printf(seq, "  backtrace:\n");
 
 	for (i = 0; i < object->trace_len; i++) {
 		void *ptr = (void *)object->trace[i];
-		print_helper(seq, "    [<%p>] %pS\n", ptr, ptr);
+		seq_printf(seq, "    [<%p>] %pS\n", ptr, ptr);
 	}
 }
 
@@ -478,7 +456,7 @@ static void create_object(unsigned long ptr, size_t size, int min_count,
 	INIT_HLIST_HEAD(&object->area_list);
 	spin_lock_init(&object->lock);
 	atomic_set(&object->use_count, 1);
-	object->flags = OBJECT_ALLOCATED;
+	object->flags = OBJECT_ALLOCATED | OBJECT_NEW;
 	object->pointer = ptr;
 	object->size = size;
 	object->min_count = min_count;
@@ -546,39 +524,87 @@ out:
  * Remove the metadata (struct kmemleak_object) for a memory block from the
  * object_list and object_tree_root and decrement its use_count.
  */
-static void delete_object(unsigned long ptr)
+static void __delete_object(struct kmemleak_object *object)
 {
 	unsigned long flags;
-	struct kmemleak_object *object;
 
 	write_lock_irqsave(&kmemleak_lock, flags);
-	object = lookup_object(ptr, 0);
-	if (!object) {
-		kmemleak_warn("Freeing unknown object at 0x%08lx\n",
-			      ptr);
-		write_unlock_irqrestore(&kmemleak_lock, flags);
-		return;
-	}
 	prio_tree_remove(&object_tree_root, &object->tree_node);
 	list_del_rcu(&object->object_list);
 	write_unlock_irqrestore(&kmemleak_lock, flags);
 
 	WARN_ON(!(object->flags & OBJECT_ALLOCATED));
-	WARN_ON(atomic_read(&object->use_count) < 1);
+	WARN_ON(atomic_read(&object->use_count) < 2);
 
 	/*
 	 * Locking here also ensures that the corresponding memory block
 	 * cannot be freed when it is being scanned.
 	 */
 	spin_lock_irqsave(&object->lock, flags);
-	if (object->flags & OBJECT_REPORTED)
-		print_referenced(object);
 	object->flags &= ~OBJECT_ALLOCATED;
 	spin_unlock_irqrestore(&object->lock, flags);
 	put_object(object);
 }
 
 /*
+ * Look up the metadata (struct kmemleak_object) corresponding to ptr and
+ * delete it.
+ */
+static void delete_object_full(unsigned long ptr)
+{
+	struct kmemleak_object *object;
+
+	object = find_and_get_object(ptr, 0);
+	if (!object) {
+#ifdef DEBUG
+		kmemleak_warn("Freeing unknown object at 0x%08lx\n",
+			      ptr);
+#endif
+		return;
+	}
+	__delete_object(object);
+	put_object(object);
+}
+
+/*
+ * Look up the metadata (struct kmemleak_object) corresponding to ptr and
+ * delete it. If the memory block is partially freed, the function may create
+ * additional metadata for the remaining parts of the block.
+ */
+static void delete_object_part(unsigned long ptr, size_t size)
+{
+	struct kmemleak_object *object;
+	unsigned long start, end;
+
+	object = find_and_get_object(ptr, 1);
+	if (!object) {
+#ifdef DEBUG
+		kmemleak_warn("Partially freeing unknown object at 0x%08lx "
+			      "(size %zu)\n", ptr, size);
+#endif
+		return;
+	}
+	__delete_object(object);
+
+	/*
+	 * Create one or two objects that may result from the memory block
+	 * split. Note that partial freeing is only done by free_bootmem() and
+	 * this happens before kmemleak_init() is called. The path below is
+	 * only executed during early log recording in kmemleak_init(), so
+	 * GFP_KERNEL is enough.
+	 */
+	start = object->pointer;
+	end = object->pointer + object->size;
+	if (ptr > start)
+		create_object(start, ptr - start, object->min_count,
+			      GFP_KERNEL);
+	if (ptr + size < end)
+		create_object(ptr + size, end - ptr - size, object->min_count,
+			      GFP_KERNEL);
+
+	put_object(object);
+}
+/*
  * Make a object permanently as gray-colored so that it can no longer be
  * reported as a leak. This is used in general to mark a false positive.
  */
@@ -696,7 +722,8 @@ static void log_early(int op_type, const void *ptr, size_t size,
 	struct early_log *log;
 
 	if (crt_early_log >= ARRAY_SIZE(early_log)) {
-		kmemleak_stop("Early log buffer exceeded\n");
+		pr_warning("Early log buffer exceeded\n");
+		kmemleak_disable();
 		return;
 	}
 
@@ -741,13 +768,28 @@ void kmemleak_free(const void *ptr)
 	pr_debug("%s(0x%p)\n", __func__, ptr);
 
 	if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
-		delete_object((unsigned long)ptr);
+		delete_object_full((unsigned long)ptr);
 	else if (atomic_read(&kmemleak_early_log))
 		log_early(KMEMLEAK_FREE, ptr, 0, 0, 0, 0);
 }
 EXPORT_SYMBOL_GPL(kmemleak_free);
 
 /*
+ * Partial memory freeing function callback. This function is usually called
+ * from bootmem allocator when (part of) a memory block is freed.
+ */
+void kmemleak_free_part(const void *ptr, size_t size)
+{
+	pr_debug("%s(0x%p)\n", __func__, ptr);
+
+	if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
+		delete_object_part((unsigned long)ptr, size);
+	else if (atomic_read(&kmemleak_early_log))
+		log_early(KMEMLEAK_FREE_PART, ptr, size, 0, 0, 0);
+}
+EXPORT_SYMBOL_GPL(kmemleak_free_part);
+
+/*
  * Mark an already allocated memory block as a false positive. This will cause
  * the block to no longer be reported as leak and always be scanned.
  */
@@ -808,21 +850,6 @@ void kmemleak_no_scan(const void *ptr)
 EXPORT_SYMBOL(kmemleak_no_scan);
 
 /*
- * Yield the CPU so that other tasks get a chance to run.  The yielding is
- * rate-limited to avoid excessive number of calls to the schedule() function
- * during memory scanning.
- */
-static void scan_yield(void)
-{
-	might_sleep();
-
-	if (time_is_before_eq_jiffies(next_scan_yield)) {
-		schedule();
-		next_scan_yield = jiffies + jiffies_scan_yield;
-	}
-}
-
-/*
  * Memory scanning is a long process and it needs to be interruptable. This
  * function checks whether such interrupt condition occured.
  */
@@ -848,7 +875,7 @@ static int scan_should_stop(void)
  * found to the gray list.
  */
 static void scan_block(void *_start, void *_end,
-		       struct kmemleak_object *scanned)
+		       struct kmemleak_object *scanned, int allow_resched)
 {
 	unsigned long *ptr;
 	unsigned long *start = PTR_ALIGN(_start, BYTES_PER_POINTER);
@@ -859,18 +886,11 @@ static void scan_block(void *_start, void *_end,
 		unsigned long pointer = *ptr;
 		struct kmemleak_object *object;
 
+		if (allow_resched)
+			cond_resched();
 		if (scan_should_stop())
 			break;
 
-		/*
-		 * When scanning a memory block with a corresponding
-		 * kmemleak_object, the CPU yielding is handled in the calling
-		 * code since it holds the object->lock to avoid the block
-		 * freeing.
-		 */
-		if (!scanned)
-			scan_yield();
-
 		object = find_and_get_object(pointer, 1);
 		if (!object)
 			continue;
@@ -931,12 +951,12 @@ static void scan_object(struct kmemleak_object *object)
 		goto out;
 	if (hlist_empty(&object->area_list))
 		scan_block((void *)object->pointer,
-			   (void *)(object->pointer + object->size), object);
+			   (void *)(object->pointer + object->size), object, 0);
 	else
 		hlist_for_each_entry(area, elem, &object->area_list, node)
 			scan_block((void *)(object->pointer + area->offset),
 				   (void *)(object->pointer + area->offset
-					    + area->length), object);
+					    + area->length), object, 0);
 out:
 	spin_unlock_irqrestore(&object->lock, flags);
 }
@@ -952,6 +972,10 @@ static void kmemleak_scan(void)
 	struct kmemleak_object *object, *tmp;
 	struct task_struct *task;
 	int i;
+	int new_leaks = 0;
+	int gray_list_pass = 0;
+
+	jiffies_last_scan = jiffies;
 
 	/* prepare the kmemleak_object's */
 	rcu_read_lock();
@@ -970,6 +994,7 @@ static void kmemleak_scan(void)
 #endif
 		/* reset the reference count (whiten the object) */
 		object->count = 0;
+		object->flags &= ~OBJECT_NEW;
 		if (color_gray(object) && get_object(object))
 			list_add_tail(&object->gray_list, &gray_list);
 
@@ -978,14 +1003,14 @@ static void kmemleak_scan(void)
 	rcu_read_unlock();
 
 	/* data/bss scanning */
-	scan_block(_sdata, _edata, NULL);
-	scan_block(__bss_start, __bss_stop, NULL);
+	scan_block(_sdata, _edata, NULL, 1);
+	scan_block(__bss_start, __bss_stop, NULL, 1);
 
 #ifdef CONFIG_SMP
 	/* per-cpu sections scanning */
 	for_each_possible_cpu(i)
 		scan_block(__per_cpu_start + per_cpu_offset(i),
-			   __per_cpu_end + per_cpu_offset(i), NULL);
+			   __per_cpu_end + per_cpu_offset(i), NULL, 1);
 #endif
 
 	/*
@@ -1007,7 +1032,7 @@ static void kmemleak_scan(void)
 			/* only scan if page is in use */
 			if (page_count(page) == 0)
 				continue;
-			scan_block(page, page + 1, NULL);
+			scan_block(page, page + 1, NULL, 1);
 		}
 	}
 
@@ -1019,7 +1044,8 @@ static void kmemleak_scan(void)
 		read_lock(&tasklist_lock);
 		for_each_process(task)
 			scan_block(task_stack_page(task),
-				   task_stack_page(task) + THREAD_SIZE, NULL);
+				   task_stack_page(task) + THREAD_SIZE,
+				   NULL, 0);
 		read_unlock(&tasklist_lock);
 	}
 
@@ -1031,9 +1057,10 @@ static void kmemleak_scan(void)
 	 * kmemleak objects cannot be freed from outside the loop because their
 	 * use_count was increased.
 	 */
+repeat:
 	object = list_entry(gray_list.next, typeof(*object), gray_list);
 	while (&object->gray_list != &gray_list) {
-		scan_yield();
+		cond_resched();
 
 		/* may add new objects to the list */
 		if (!scan_should_stop())
@@ -1048,7 +1075,59 @@ static void kmemleak_scan(void)
 
 		object = tmp;
 	}
+
+	if (scan_should_stop() || ++gray_list_pass >= GRAY_LIST_PASSES)
+		goto scan_end;
+
+	/*
+	 * Check for new objects allocated during this scanning and add them
+	 * to the gray list.
+	 */
+	rcu_read_lock();
+	list_for_each_entry_rcu(object, &object_list, object_list) {
+		spin_lock_irqsave(&object->lock, flags);
+		if ((object->flags & OBJECT_NEW) && !color_black(object) &&
+		    get_object(object)) {
+			object->flags &= ~OBJECT_NEW;
+			list_add_tail(&object->gray_list, &gray_list);
+		}
+		spin_unlock_irqrestore(&object->lock, flags);
+	}
+	rcu_read_unlock();
+
+	if (!list_empty(&gray_list))
+		goto repeat;
+
+scan_end:
 	WARN_ON(!list_empty(&gray_list));
+
+	/*
+	 * If scanning was stopped or new objects were being allocated at a
+	 * higher rate than gray list scanning, do not report any new
+	 * unreferenced objects.
+	 */
+	if (scan_should_stop() || gray_list_pass >= GRAY_LIST_PASSES)
+		return;
+
+	/*
+	 * Scanning result reporting.
+	 */
+	rcu_read_lock();
+	list_for_each_entry_rcu(object, &object_list, object_list) {
+		spin_lock_irqsave(&object->lock, flags);
+		if (unreferenced_object(object) &&
+		    !(object->flags & OBJECT_REPORTED)) {
+			object->flags |= OBJECT_REPORTED;
+			new_leaks++;
+		}
+		spin_unlock_irqrestore(&object->lock, flags);
+	}
+	rcu_read_unlock();
+
+	if (new_leaks)
+		pr_info("%d new suspected memory leaks (see "
+			"/sys/kernel/debug/kmemleak)\n", new_leaks);
+
 }
 
 /*
@@ -1060,6 +1139,7 @@ static int kmemleak_scan_thread(void *arg)
 	static int first_run = 1;
 
 	pr_info("Automatic memory scanning thread started\n");
+	set_user_nice(current, 10);
 
 	/*
 	 * Wait before the first scan to allow the system to fully initialize.
@@ -1070,36 +1150,12 @@ static int kmemleak_scan_thread(void *arg)
 	}
 
 	while (!kthread_should_stop()) {
-		struct kmemleak_object *object;
 		signed long timeout = jiffies_scan_wait;
 
 		mutex_lock(&scan_mutex);
-
 		kmemleak_scan();
-		reported_leaks = 0;
-
-		rcu_read_lock();
-		list_for_each_entry_rcu(object, &object_list, object_list) {
-			unsigned long flags;
-
-			if (reported_leaks >= REPORTS_NR)
-				break;
-			spin_lock_irqsave(&object->lock, flags);
-			if (!(object->flags & OBJECT_REPORTED) &&
-			    unreferenced_object(object)) {
-				print_unreferenced(NULL, object);
-				object->flags |= OBJECT_REPORTED;
-				reported_leaks++;
-			} else if ((object->flags & OBJECT_REPORTED) &&
-				   referenced_object(object)) {
-				print_referenced(object);
-				object->flags &= ~OBJECT_REPORTED;
-			}
-			spin_unlock_irqrestore(&object->lock, flags);
-		}
-		rcu_read_unlock();
-
 		mutex_unlock(&scan_mutex);
+
 		/* wait before the next scan */
 		while (timeout && !kthread_should_stop())
 			timeout = schedule_timeout_interruptible(timeout);
@@ -1112,7 +1168,7 @@ static int kmemleak_scan_thread(void *arg)
 
 /*
  * Start the automatic memory scanning thread. This function must be called
- * with the kmemleak_mutex held.
+ * with the scan_mutex held.
  */
 void start_scan_thread(void)
 {
@@ -1127,7 +1183,7 @@ void start_scan_thread(void)
 
 /*
  * Stop the automatic memory scanning thread. This function must be called
- * with the kmemleak_mutex held.
+ * with the scan_mutex held.
  */
 void stop_scan_thread(void)
 {
@@ -1146,13 +1202,11 @@ static void *kmemleak_seq_start(struct seq_file *seq, loff_t *pos)
 {
 	struct kmemleak_object *object;
 	loff_t n = *pos;
+	int err;
 
-	if (!n) {
-		kmemleak_scan();
-		reported_leaks = 0;
-	}
-	if (reported_leaks >= REPORTS_NR)
-		return NULL;
+	err = mutex_lock_interruptible(&scan_mutex);
+	if (err < 0)
+		return ERR_PTR(err);
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(object, &object_list, object_list) {
@@ -1163,7 +1217,6 @@ static void *kmemleak_seq_start(struct seq_file *seq, loff_t *pos)
 	}
 	object = NULL;
 out:
-	rcu_read_unlock();
 	return object;
 }
 
@@ -1178,17 +1231,13 @@ static void *kmemleak_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 	struct list_head *n = &prev_obj->object_list;
 
 	++(*pos);
-	if (reported_leaks >= REPORTS_NR)
-		goto out;
 
-	rcu_read_lock();
 	list_for_each_continue_rcu(n, &object_list) {
 		next_obj = list_entry(n, struct kmemleak_object, object_list);
 		if (get_object(next_obj))
 			break;
 	}
-	rcu_read_unlock();
-out:
+
 	put_object(prev_obj);
 	return next_obj;
 }
@@ -1198,8 +1247,16 @@ out:
  */
 static void kmemleak_seq_stop(struct seq_file *seq, void *v)
 {
-	if (v)
-		put_object(v);
+	if (!IS_ERR(v)) {
+		/*
+		 * kmemleak_seq_start may return ERR_PTR if the scan_mutex
+		 * waiting was interrupted, so only release it if !IS_ERR.
+		 */
+		rcu_read_unlock();
+		mutex_unlock(&scan_mutex);
+		if (v)
+			put_object(v);
+	}
 }
 
 /*
@@ -1211,11 +1268,8 @@ static int kmemleak_seq_show(struct seq_file *seq, void *v)
 	unsigned long flags;
 
 	spin_lock_irqsave(&object->lock, flags);
-	if (!unreferenced_object(object))
-		goto out;
-	print_unreferenced(seq, object);
-	reported_leaks++;
-out:
+	if ((object->flags & OBJECT_REPORTED) && unreferenced_object(object))
+		print_unreferenced(seq, object);
 	spin_unlock_irqrestore(&object->lock, flags);
 	return 0;
 }
@@ -1229,43 +1283,15 @@ static const struct seq_operations kmemleak_seq_ops = {
 
 static int kmemleak_open(struct inode *inode, struct file *file)
 {
-	int ret = 0;
-
 	if (!atomic_read(&kmemleak_enabled))
 		return -EBUSY;
 
-	ret = mutex_lock_interruptible(&kmemleak_mutex);
-	if (ret < 0)
-		goto out;
-	if (file->f_mode & FMODE_READ) {
-		ret = mutex_lock_interruptible(&scan_mutex);
-		if (ret < 0)
-			goto kmemleak_unlock;
-		ret = seq_open(file, &kmemleak_seq_ops);
-		if (ret < 0)
-			goto scan_unlock;
-	}
-	return ret;
-
-scan_unlock:
-	mutex_unlock(&scan_mutex);
-kmemleak_unlock:
-	mutex_unlock(&kmemleak_mutex);
-out:
-	return ret;
+	return seq_open(file, &kmemleak_seq_ops);
 }
 
 static int kmemleak_release(struct inode *inode, struct file *file)
 {
-	int ret = 0;
-
-	if (file->f_mode & FMODE_READ) {
-		seq_release(inode, file);
-		mutex_unlock(&scan_mutex);
-	}
-	mutex_unlock(&kmemleak_mutex);
-
-	return ret;
+	return seq_release(inode, file);
 }
 
 /*
@@ -1278,21 +1304,24 @@ static int kmemleak_release(struct inode *inode, struct file *file)
  *   scan=off	- stop the automatic memory scanning thread
  *   scan=...	- set the automatic memory scanning period in seconds (0 to
  *		  disable it)
+ *   scan	- trigger a memory scan
  */
 static ssize_t kmemleak_write(struct file *file, const char __user *user_buf,
 			      size_t size, loff_t *ppos)
 {
 	char buf[64];
 	int buf_size;
-
-	if (!atomic_read(&kmemleak_enabled))
-		return -EBUSY;
+	int ret;
 
 	buf_size = min(size, (sizeof(buf) - 1));
 	if (strncpy_from_user(buf, user_buf, buf_size) < 0)
 		return -EFAULT;
 	buf[buf_size] = 0;
 
+	ret = mutex_lock_interruptible(&scan_mutex);
+	if (ret < 0)
+		return ret;
+
 	if (strncmp(buf, "off", 3) == 0)
 		kmemleak_disable();
 	else if (strncmp(buf, "stack=on", 8) == 0)
@@ -1305,18 +1334,24 @@ static ssize_t kmemleak_write(struct file *file, const char __user *user_buf,
 		stop_scan_thread();
 	else if (strncmp(buf, "scan=", 5) == 0) {
 		unsigned long secs;
-		int err;
 
-		err = strict_strtoul(buf + 5, 0, &secs);
-		if (err < 0)
-			return err;
+		ret = strict_strtoul(buf + 5, 0, &secs);
+		if (ret < 0)
+			goto out;
 		stop_scan_thread();
 		if (secs) {
 			jiffies_scan_wait = msecs_to_jiffies(secs * 1000);
 			start_scan_thread();
 		}
-	} else
-		return -EINVAL;
+	} else if (strncmp(buf, "scan", 4) == 0)
+		kmemleak_scan();
+	else
+		ret = -EINVAL;
+
+out:
+	mutex_unlock(&scan_mutex);
+	if (ret < 0)
+		return ret;
 
 	/* ignore the rest of the buffer, only one command at a time */
 	*ppos += size;
@@ -1340,14 +1375,12 @@ static int kmemleak_cleanup_thread(void *arg)
 {
 	struct kmemleak_object *object;
 
-	mutex_lock(&kmemleak_mutex);
+	mutex_lock(&scan_mutex);
 	stop_scan_thread();
-	mutex_unlock(&kmemleak_mutex);
 
-	mutex_lock(&scan_mutex);
 	rcu_read_lock();
 	list_for_each_entry_rcu(object, &object_list, object_list)
-		delete_object(object->pointer);
+		delete_object_full(object->pointer);
 	rcu_read_unlock();
 	mutex_unlock(&scan_mutex);
 
@@ -1411,7 +1444,6 @@ void __init kmemleak_init(void)
 	int i;
 	unsigned long flags;
 
-	jiffies_scan_yield = msecs_to_jiffies(MSECS_SCAN_YIELD);
 	jiffies_min_age = msecs_to_jiffies(MSECS_MIN_AGE);
 	jiffies_scan_wait = msecs_to_jiffies(SECS_SCAN_WAIT * 1000);
 
@@ -1443,6 +1475,9 @@ void __init kmemleak_init(void)
 		case KMEMLEAK_FREE:
 			kmemleak_free(log->ptr);
 			break;
+		case KMEMLEAK_FREE_PART:
+			kmemleak_free_part(log->ptr, log->size);
+			break;
 		case KMEMLEAK_NOT_LEAK:
 			kmemleak_not_leak(log->ptr);
 			break;
@@ -1486,9 +1521,9 @@ static int __init kmemleak_late_init(void)
 				     &kmemleak_fops);
 	if (!dentry)
 		pr_warning("Failed to create the debugfs kmemleak file\n");
-	mutex_lock(&kmemleak_mutex);
+	mutex_lock(&scan_mutex);
 	start_scan_thread();
-	mutex_unlock(&kmemleak_mutex);
+	mutex_unlock(&scan_mutex);
 
 	pr_info("Kernel memory leak detector initialized\n");
 
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e2fa20dadf4..fd4529d86de 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1207,6 +1207,12 @@ static int mem_cgroup_move_account(struct page_cgroup *pc,
 	ret = 0;
 out:
 	unlock_page_cgroup(pc);
+	/*
+	 * We charges against "to" which may not have any tasks. Then, "to"
+	 * can be under rmdir(). But in current implementation, caller of
+	 * this function is just force_empty() and it's garanteed that
+	 * "to" is never removed. So, we don't check rmdir status here.
+	 */
 	return ret;
 }
 
@@ -1428,6 +1434,7 @@ __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr,
 		return;
 	if (!ptr)
 		return;
+	cgroup_exclude_rmdir(&ptr->css);
 	pc = lookup_page_cgroup(page);
 	mem_cgroup_lru_del_before_commit_swapcache(page);
 	__mem_cgroup_commit_charge(ptr, pc, ctype);
@@ -1457,8 +1464,12 @@ __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr,
 		}
 		rcu_read_unlock();
 	}
-	/* add this page(page_cgroup) to the LRU we want. */
-
+	/*
+	 * At swapin, we may charge account against cgroup which has no tasks.
+	 * So, rmdir()->pre_destroy() can be called while we do this charge.
+	 * In that case, we need to call pre_destroy() again. check it here.
+	 */
+	cgroup_release_and_wakeup_rmdir(&ptr->css);
 }
 
 void mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr)
@@ -1664,7 +1675,7 @@ void mem_cgroup_end_migration(struct mem_cgroup *mem,
 
 	if (!mem)
 		return;
-
+	cgroup_exclude_rmdir(&mem->css);
 	/* at migration success, oldpage->mapping is NULL. */
 	if (oldpage->mapping) {
 		target = oldpage;
@@ -1704,6 +1715,12 @@ void mem_cgroup_end_migration(struct mem_cgroup *mem,
 	 */
 	if (ctype == MEM_CGROUP_CHARGE_TYPE_MAPPED)
 		mem_cgroup_uncharge_page(target);
+	/*
+	 * At migration, we may charge account against cgroup which has no tasks
+	 * So, rmdir()->pre_destroy() can be called while we do this charge.
+	 * In that case, we need to call pre_destroy() again. check it here.
+	 */
+	cgroup_release_and_wakeup_rmdir(&mem->css);
 }
 
 /*
@@ -1973,7 +1990,7 @@ try_to_free:
 		if (!progress) {
 			nr_retries--;
 			/* maybe some writeback is necessary */
-			congestion_wait(WRITE, HZ/10);
+			congestion_wait(BLK_RW_ASYNC, HZ/10);
 		}
 
 	}
diff --git a/mm/memory.c b/mm/memory.c
index f46ac18ba23..aede2ce3aba 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -135,11 +135,12 @@ void pmd_clear_bad(pmd_t *pmd)
  * Note: this doesn't free the actual pages themselves. That
  * has been handled earlier when unmapping all the memory regions.
  */
-static void free_pte_range(struct mmu_gather *tlb, pmd_t *pmd)
+static void free_pte_range(struct mmu_gather *tlb, pmd_t *pmd,
+			   unsigned long addr)
 {
 	pgtable_t token = pmd_pgtable(*pmd);
 	pmd_clear(pmd);
-	pte_free_tlb(tlb, token);
+	pte_free_tlb(tlb, token, addr);
 	tlb->mm->nr_ptes--;
 }
 
@@ -157,7 +158,7 @@ static inline void free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 		next = pmd_addr_end(addr, end);
 		if (pmd_none_or_clear_bad(pmd))
 			continue;
-		free_pte_range(tlb, pmd);
+		free_pte_range(tlb, pmd, addr);
 	} while (pmd++, addr = next, addr != end);
 
 	start &= PUD_MASK;
@@ -173,7 +174,7 @@ static inline void free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 
 	pmd = pmd_offset(pud, start);
 	pud_clear(pud);
-	pmd_free_tlb(tlb, pmd);
+	pmd_free_tlb(tlb, pmd, start);
 }
 
 static inline void free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
@@ -206,7 +207,7 @@ static inline void free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 
 	pud = pud_offset(pgd, start);
 	pgd_clear(pgd);
-	pud_free_tlb(tlb, pud);
+	pud_free_tlb(tlb, pud, start);
 }
 
 /*
@@ -1207,8 +1208,8 @@ static inline int use_zero_page(struct vm_area_struct *vma)
 
 
 int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-		     unsigned long start, int len, int flags,
-		struct page **pages, struct vm_area_struct **vmas)
+		     unsigned long start, int nr_pages, int flags,
+		     struct page **pages, struct vm_area_struct **vmas)
 {
 	int i;
 	unsigned int vm_flags = 0;
@@ -1217,7 +1218,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 	int ignore = !!(flags & GUP_FLAGS_IGNORE_VMA_PERMISSIONS);
 	int ignore_sigkill = !!(flags & GUP_FLAGS_IGNORE_SIGKILL);
 
-	if (len <= 0)
+	if (nr_pages <= 0)
 		return 0;
 	/* 
 	 * Require read or write permissions.
@@ -1269,7 +1270,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 				vmas[i] = gate_vma;
 			i++;
 			start += PAGE_SIZE;
-			len--;
+			nr_pages--;
 			continue;
 		}
 
@@ -1280,7 +1281,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 
 		if (is_vm_hugetlb_page(vma)) {
 			i = follow_hugetlb_page(mm, vma, pages, vmas,
-						&start, &len, i, write);
+						&start, &nr_pages, i, write);
 			continue;
 		}
 
@@ -1357,9 +1358,9 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 				vmas[i] = vma;
 			i++;
 			start += PAGE_SIZE;
-			len--;
-		} while (len && start < vma->vm_end);
-	} while (len);
+			nr_pages--;
+		} while (nr_pages && start < vma->vm_end);
+	} while (nr_pages);
 	return i;
 }
 
@@ -1368,7 +1369,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
  * @tsk:	task_struct of target task
  * @mm:		mm_struct of target mm
  * @start:	starting user address
- * @len:	number of pages from start to pin
+ * @nr_pages:	number of pages from start to pin
  * @write:	whether pages will be written to by the caller
  * @force:	whether to force write access even if user mapping is
  *		readonly. This will result in the page being COWed even
@@ -1380,7 +1381,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
  *		Or NULL if the caller does not require them.
  *
  * Returns number of pages pinned. This may be fewer than the number
- * requested. If len is 0 or negative, returns 0. If no pages
+ * requested. If nr_pages is 0 or negative, returns 0. If no pages
  * were pinned, returns -errno. Each page returned must be released
  * with a put_page() call when it is finished with. vmas will only
  * remain valid while mmap_sem is held.
@@ -1414,7 +1415,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
  * See also get_user_pages_fast, for performance critical applications.
  */
 int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-		unsigned long start, int len, int write, int force,
+		unsigned long start, int nr_pages, int write, int force,
 		struct page **pages, struct vm_area_struct **vmas)
 {
 	int flags = 0;
@@ -1424,9 +1425,7 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 	if (force)
 		flags |= GUP_FLAGS_FORCE;
 
-	return __get_user_pages(tsk, mm,
-				start, len, flags,
-				pages, vmas);
+	return __get_user_pages(tsk, mm, start, nr_pages, flags, pages, vmas);
 }
 
 EXPORT_SYMBOL(get_user_pages);
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index e08e2c4da63..7dd9d9f8069 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -191,25 +191,27 @@ static int mpol_new_bind(struct mempolicy *pol, const nodemask_t *nodes)
  * Must be called holding task's alloc_lock to protect task's mems_allowed
  * and mempolicy.  May also be called holding the mmap_semaphore for write.
  */
-static int mpol_set_nodemask(struct mempolicy *pol, const nodemask_t *nodes)
+static int mpol_set_nodemask(struct mempolicy *pol,
+		     const nodemask_t *nodes, struct nodemask_scratch *nsc)
 {
-	nodemask_t cpuset_context_nmask;
 	int ret;
 
 	/* if mode is MPOL_DEFAULT, pol is NULL. This is right. */
 	if (pol == NULL)
 		return 0;
+	/* Check N_HIGH_MEMORY */
+	nodes_and(nsc->mask1,
+		  cpuset_current_mems_allowed, node_states[N_HIGH_MEMORY]);
 
 	VM_BUG_ON(!nodes);
 	if (pol->mode == MPOL_PREFERRED && nodes_empty(*nodes))
 		nodes = NULL;	/* explicit local allocation */
 	else {
 		if (pol->flags & MPOL_F_RELATIVE_NODES)
-			mpol_relative_nodemask(&cpuset_context_nmask, nodes,
-					       &cpuset_current_mems_allowed);
+			mpol_relative_nodemask(&nsc->mask2, nodes,&nsc->mask1);
 		else
-			nodes_and(cpuset_context_nmask, *nodes,
-				  cpuset_current_mems_allowed);
+			nodes_and(nsc->mask2, *nodes, nsc->mask1);
+
 		if (mpol_store_user_nodemask(pol))
 			pol->w.user_nodemask = *nodes;
 		else
@@ -217,8 +219,10 @@ static int mpol_set_nodemask(struct mempolicy *pol, const nodemask_t *nodes)
 						cpuset_current_mems_allowed;
 	}
 
-	ret = mpol_ops[pol->mode].create(pol,
-				nodes ? &cpuset_context_nmask : NULL);
+	if (nodes)
+		ret = mpol_ops[pol->mode].create(pol, &nsc->mask2);
+	else
+		ret = mpol_ops[pol->mode].create(pol, NULL);
 	return ret;
 }
 
@@ -620,12 +624,17 @@ static long do_set_mempolicy(unsigned short mode, unsigned short flags,
 {
 	struct mempolicy *new, *old;
 	struct mm_struct *mm = current->mm;
+	NODEMASK_SCRATCH(scratch);
 	int ret;
 
-	new = mpol_new(mode, flags, nodes);
-	if (IS_ERR(new))
-		return PTR_ERR(new);
+	if (!scratch)
+		return -ENOMEM;
 
+	new = mpol_new(mode, flags, nodes);
+	if (IS_ERR(new)) {
+		ret = PTR_ERR(new);
+		goto out;
+	}
 	/*
 	 * prevent changing our mempolicy while show_numa_maps()
 	 * is using it.
@@ -635,13 +644,13 @@ static long do_set_mempolicy(unsigned short mode, unsigned short flags,
 	if (mm)
 		down_write(&mm->mmap_sem);
 	task_lock(current);
-	ret = mpol_set_nodemask(new, nodes);
+	ret = mpol_set_nodemask(new, nodes, scratch);
 	if (ret) {
 		task_unlock(current);
 		if (mm)
 			up_write(&mm->mmap_sem);
 		mpol_put(new);
-		return ret;
+		goto out;
 	}
 	old = current->mempolicy;
 	current->mempolicy = new;
@@ -654,7 +663,10 @@ static long do_set_mempolicy(unsigned short mode, unsigned short flags,
 		up_write(&mm->mmap_sem);
 
 	mpol_put(old);
-	return 0;
+	ret = 0;
+out:
+	NODEMASK_SCRATCH_FREE(scratch);
+	return ret;
 }
 
 /*
@@ -1014,12 +1026,20 @@ static long do_mbind(unsigned long start, unsigned long len,
 		if (err)
 			return err;
 	}
-	down_write(&mm->mmap_sem);
-	task_lock(current);
-	err = mpol_set_nodemask(new, nmask);
-	task_unlock(current);
+	{
+		NODEMASK_SCRATCH(scratch);
+		if (scratch) {
+			down_write(&mm->mmap_sem);
+			task_lock(current);
+			err = mpol_set_nodemask(new, nmask, scratch);
+			task_unlock(current);
+			if (err)
+				up_write(&mm->mmap_sem);
+		} else
+			err = -ENOMEM;
+		NODEMASK_SCRATCH_FREE(scratch);
+	}
 	if (err) {
-		up_write(&mm->mmap_sem);
 		mpol_put(new);
 		return err;
 	}
@@ -1891,6 +1911,7 @@ restart:
  * Install non-NULL @mpol in inode's shared policy rb-tree.
  * On entry, the current task has a reference on a non-NULL @mpol.
  * This must be released on exit.
+ * This is called at get_inode() calls and we can use GFP_KERNEL.
  */
 void mpol_shared_policy_init(struct shared_policy *sp, struct mempolicy *mpol)
 {
@@ -1902,19 +1923,24 @@ void mpol_shared_policy_init(struct shared_policy *sp, struct mempolicy *mpol)
 	if (mpol) {
 		struct vm_area_struct pvma;
 		struct mempolicy *new;
+		NODEMASK_SCRATCH(scratch);
 
+		if (!scratch)
+			return;
 		/* contextualize the tmpfs mount point mempolicy */
 		new = mpol_new(mpol->mode, mpol->flags, &mpol->w.user_nodemask);
 		if (IS_ERR(new)) {
 			mpol_put(mpol);	/* drop our ref on sb mpol */
+			NODEMASK_SCRATCH_FREE(scratch);
 			return;		/* no valid nodemask intersection */
 		}
 
 		task_lock(current);
-		ret = mpol_set_nodemask(new, &mpol->w.user_nodemask);
+		ret = mpol_set_nodemask(new, &mpol->w.user_nodemask, scratch);
 		task_unlock(current);
 		mpol_put(mpol);	/* drop our ref on sb mpol */
 		if (ret) {
+			NODEMASK_SCRATCH_FREE(scratch);
 			mpol_put(new);
 			return;
 		}
@@ -1924,6 +1950,7 @@ void mpol_shared_policy_init(struct shared_policy *sp, struct mempolicy *mpol)
 		pvma.vm_end = TASK_SIZE;	/* policy covers entire file */
 		mpol_set_shared_policy(sp, &pvma, new); /* adds ref */
 		mpol_put(new);			/* drop initial ref */
+		NODEMASK_SCRATCH_FREE(scratch);
 	}
 }
 
@@ -2140,13 +2167,18 @@ int mpol_parse_str(char *str, struct mempolicy **mpol, int no_context)
 		err = 1;
 	else {
 		int ret;
-
-		task_lock(current);
-		ret = mpol_set_nodemask(new, &nodes);
-		task_unlock(current);
-		if (ret)
+		NODEMASK_SCRATCH(scratch);
+		if (scratch) {
+			task_lock(current);
+			ret = mpol_set_nodemask(new, &nodes, scratch);
+			task_unlock(current);
+		} else
+			ret = -ENOMEM;
+		NODEMASK_SCRATCH_FREE(scratch);
+		if (ret) {
 			err = 1;
-		else if (no_context) {
+			mpol_put(new);
+		} else if (no_context) {
 			/* save for contextualization */
 			new->w.user_nodemask = nodes;
 		}
diff --git a/mm/mempool.c b/mm/mempool.c
index a46eb1b4bb6..32e75d40050 100644
--- a/mm/mempool.c
+++ b/mm/mempool.c
@@ -303,14 +303,14 @@ EXPORT_SYMBOL(mempool_free_slab);
  */
 void *mempool_kmalloc(gfp_t gfp_mask, void *pool_data)
 {
-	size_t size = (size_t)(long)pool_data;
+	size_t size = (size_t)pool_data;
 	return kmalloc(size, gfp_mask);
 }
 EXPORT_SYMBOL(mempool_kmalloc);
 
 void *mempool_kzalloc(gfp_t gfp_mask, void *pool_data)
 {
-	size_t size = (size_t) pool_data;
+	size_t size = (size_t)pool_data;
 	return kzalloc(size, gfp_mask);
 }
 EXPORT_SYMBOL(mempool_kzalloc);
diff --git a/mm/mmap.c b/mm/mmap.c
index 34579b23ebd..8101de490c7 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -88,9 +88,6 @@ int sysctl_overcommit_ratio = 50;	/* default is 50% */
 int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
 struct percpu_counter vm_committed_as;
 
-/* amount of vm to protect from userspace access */
-unsigned long mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
-
 /*
  * Check that a process has enough memory to allocate a new virtual
  * mapping. 0 means there is enough memory for the allocation to
diff --git a/mm/nommu.c b/mm/nommu.c
index 2fd2ad5da98..66e81e7e9fe 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -69,9 +69,6 @@ int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT;
 int sysctl_nr_trim_pages = CONFIG_NOMMU_INITIAL_TRIM_EXCESS;
 int heap_stack_gap = 0;
 
-/* amount of vm to protect from userspace access */
-unsigned long mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
-
 atomic_long_t mmap_pages_allocated;
 
 EXPORT_SYMBOL(mem_map);
@@ -173,8 +170,8 @@ unsigned int kobjsize(const void *objp)
 }
 
 int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-		     unsigned long start, int len, int flags,
-		struct page **pages, struct vm_area_struct **vmas)
+		     unsigned long start, int nr_pages, int flags,
+		     struct page **pages, struct vm_area_struct **vmas)
 {
 	struct vm_area_struct *vma;
 	unsigned long vm_flags;
@@ -189,7 +186,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 	vm_flags  = write ? (VM_WRITE | VM_MAYWRITE) : (VM_READ | VM_MAYREAD);
 	vm_flags &= force ? (VM_MAYREAD | VM_MAYWRITE) : (VM_READ | VM_WRITE);
 
-	for (i = 0; i < len; i++) {
+	for (i = 0; i < nr_pages; i++) {
 		vma = find_vma(mm, start);
 		if (!vma)
 			goto finish_or_fault;
@@ -224,7 +221,7 @@ finish_or_fault:
  * - don't permit access to VMAs that don't support it, such as I/O mappings
  */
 int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-	unsigned long start, int len, int write, int force,
+	unsigned long start, int nr_pages, int write, int force,
 	struct page **pages, struct vm_area_struct **vmas)
 {
 	int flags = 0;
@@ -234,12 +231,31 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 	if (force)
 		flags |= GUP_FLAGS_FORCE;
 
-	return __get_user_pages(tsk, mm,
-				start, len, flags,
-				pages, vmas);
+	return __get_user_pages(tsk, mm, start, nr_pages, flags, pages, vmas);
 }
 EXPORT_SYMBOL(get_user_pages);
 
+/**
+ * follow_pfn - look up PFN at a user virtual address
+ * @vma: memory mapping
+ * @address: user virtual address
+ * @pfn: location to store found PFN
+ *
+ * Only IO mappings and raw PFN mappings are allowed.
+ *
+ * Returns zero and the pfn at @pfn on success, -ve otherwise.
+ */
+int follow_pfn(struct vm_area_struct *vma, unsigned long address,
+	unsigned long *pfn)
+{
+	if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)))
+		return -EINVAL;
+
+	*pfn = address >> PAGE_SHIFT;
+	return 0;
+}
+EXPORT_SYMBOL(follow_pfn);
+
 DEFINE_RWLOCK(vmlist_lock);
 struct vm_struct *vmlist;
 
@@ -903,6 +919,10 @@ static int validate_mmap_request(struct file *file,
 		if (!file->f_op->read)
 			capabilities &= ~BDI_CAP_MAP_COPY;
 
+		/* The file shall have been opened with read permission. */
+		if (!(file->f_mode & FMODE_READ))
+			return -EACCES;
+
 		if (flags & MAP_SHARED) {
 			/* do checks for writing, appending and locking */
 			if ((prot & PROT_WRITE) &&
@@ -1332,6 +1352,7 @@ unsigned long do_mmap_pgoff(struct file *file,
 	}
 
 	vma->vm_region = region;
+	add_nommu_region(region);
 
 	/* set up the mapping */
 	if (file && vma->vm_flags & VM_SHARED)
@@ -1341,8 +1362,6 @@ unsigned long do_mmap_pgoff(struct file *file,
 	if (ret < 0)
 		goto error_put_region;
 
-	add_nommu_region(region);
-
 	/* okay... we have a mapping; now we have to register it */
 	result = vma->vm_start;
 
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 175a67a78a9..a7b2460e922 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -58,7 +58,6 @@ unsigned long badness(struct task_struct *p, unsigned long uptime)
 	unsigned long points, cpu_time, run_time;
 	struct mm_struct *mm;
 	struct task_struct *child;
-	int oom_adj;
 
 	task_lock(p);
 	mm = p->mm;
@@ -66,11 +65,6 @@ unsigned long badness(struct task_struct *p, unsigned long uptime)
 		task_unlock(p);
 		return 0;
 	}
-	oom_adj = mm->oom_adj;
-	if (oom_adj == OOM_DISABLE) {
-		task_unlock(p);
-		return 0;
-	}
 
 	/*
 	 * The memory size of the process is the basis for the badness.
@@ -154,15 +148,15 @@ unsigned long badness(struct task_struct *p, unsigned long uptime)
 		points /= 8;
 
 	/*
-	 * Adjust the score by oom_adj.
+	 * Adjust the score by oomkilladj.
 	 */
-	if (oom_adj) {
-		if (oom_adj > 0) {
+	if (p->oomkilladj) {
+		if (p->oomkilladj > 0) {
 			if (!points)
 				points = 1;
-			points <<= oom_adj;
+			points <<= p->oomkilladj;
 		} else
-			points >>= -(oom_adj);
+			points >>= -(p->oomkilladj);
 	}
 
 #ifdef DEBUG
@@ -257,8 +251,11 @@ static struct task_struct *select_bad_process(unsigned long *ppoints,
 			*ppoints = ULONG_MAX;
 		}
 
+		if (p->oomkilladj == OOM_DISABLE)
+			continue;
+
 		points = badness(p, uptime.tv_sec);
-		if (points > *ppoints) {
+		if (points > *ppoints || !chosen) {
 			chosen = p;
 			*ppoints = points;
 		}
@@ -307,7 +304,8 @@ static void dump_tasks(const struct mem_cgroup *mem)
 		}
 		printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d     %3d %s\n",
 		       p->pid, __task_cred(p)->uid, p->tgid, mm->total_vm,
-		       get_mm_rss(mm), (int)task_cpu(p), mm->oom_adj, p->comm);
+		       get_mm_rss(mm), (int)task_cpu(p), p->oomkilladj,
+		       p->comm);
 		task_unlock(p);
 	} while_each_thread(g, p);
 }
@@ -325,8 +323,11 @@ static void __oom_kill_task(struct task_struct *p, int verbose)
 		return;
 	}
 
-	if (!p->mm)
+	if (!p->mm) {
+		WARN_ON(1);
+		printk(KERN_WARNING "tried to kill an mm-less task!\n");
 		return;
+	}
 
 	if (verbose)
 		printk(KERN_ERR "Killed process %d (%s)\n",
@@ -348,13 +349,28 @@ static int oom_kill_task(struct task_struct *p)
 	struct mm_struct *mm;
 	struct task_struct *g, *q;
 
-	task_lock(p);
 	mm = p->mm;
-	if (!mm || mm->oom_adj == OOM_DISABLE) {
-		task_unlock(p);
+
+	/* WARNING: mm may not be dereferenced since we did not obtain its
+	 * value from get_task_mm(p).  This is OK since all we need to do is
+	 * compare mm to q->mm below.
+	 *
+	 * Furthermore, even if mm contains a non-NULL value, p->mm may
+	 * change to NULL at any time since we do not hold task_lock(p).
+	 * However, this is of no concern to us.
+	 */
+
+	if (mm == NULL)
 		return 1;
-	}
-	task_unlock(p);
+
+	/*
+	 * Don't kill the process if any threads are set to OOM_DISABLE
+	 */
+	do_each_thread(g, q) {
+		if (q->mm == mm && q->oomkilladj == OOM_DISABLE)
+			return 1;
+	} while_each_thread(g, q);
+
 	__oom_kill_task(p, 1);
 
 	/*
@@ -377,11 +393,10 @@ static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order,
 	struct task_struct *c;
 
 	if (printk_ratelimit()) {
-		task_lock(current);
 		printk(KERN_WARNING "%s invoked oom-killer: "
-			"gfp_mask=0x%x, order=%d, oom_adj=%d\n",
-			current->comm, gfp_mask, order,
-			current->mm ? current->mm->oom_adj : OOM_DISABLE);
+			"gfp_mask=0x%x, order=%d, oomkilladj=%d\n",
+			current->comm, gfp_mask, order, current->oomkilladj);
+		task_lock(current);
 		cpuset_print_task_mems_allowed(current);
 		task_unlock(current);
 		dump_stack();
@@ -394,9 +409,8 @@ static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order,
 	/*
 	 * If the task is already exiting, don't alarm the sysadmin or kill
 	 * its children or threads, just set TIF_MEMDIE so it can die quickly
-	 * if its mm is still attached.
 	 */
-	if (p->mm && (p->flags & PF_EXITING)) {
+	if (p->flags & PF_EXITING) {
 		__oom_kill_task(p, 0);
 		return 0;
 	}
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 7b0dcea4935..81627ebcd31 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -541,8 +541,11 @@ static void balance_dirty_pages(struct address_space *mapping)
 		 * filesystems (i.e. NFS) in which data may have been
 		 * written to the server's write cache, but has not yet
 		 * been flushed to permanent storage.
+		 * Only move pages to writeback if this bdi is over its
+		 * threshold otherwise wait until the disk writes catch
+		 * up.
 		 */
-		if (bdi_nr_reclaimable) {
+		if (bdi_nr_reclaimable > bdi_thresh) {
 			writeback_inodes(&wbc);
 			pages_written += write_chunk - wbc.nr_to_write;
 			get_dirty_limits(&background_thresh, &dirty_thresh,
@@ -572,7 +575,7 @@ static void balance_dirty_pages(struct address_space *mapping)
 		if (pages_written >= write_chunk)
 			break;		/* We've done our duty */
 
-		congestion_wait(WRITE, HZ/10);
+		congestion_wait(BLK_RW_ASYNC, HZ/10);
 	}
 
 	if (bdi_nr_reclaimable + bdi_nr_writeback < bdi_thresh &&
@@ -666,7 +669,7 @@ void throttle_vm_writeout(gfp_t gfp_mask)
                 if (global_page_state(NR_UNSTABLE_NFS) +
 			global_page_state(NR_WRITEBACK) <= dirty_thresh)
                         	break;
-                congestion_wait(WRITE, HZ/10);
+                congestion_wait(BLK_RW_ASYNC, HZ/10);
 
 		/*
 		 * The caller might hold locks which can prevent IO completion
@@ -712,7 +715,7 @@ static void background_writeout(unsigned long _min_pages)
 		if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
 			/* Wrote less than expected */
 			if (wbc.encountered_congestion || wbc.more_io)
-				congestion_wait(WRITE, HZ/10);
+				congestion_wait(BLK_RW_ASYNC, HZ/10);
 			else
 				break;
 		}
@@ -784,7 +787,7 @@ static void wb_kupdate(unsigned long arg)
 		writeback_inodes(&wbc);
 		if (wbc.nr_to_write > 0) {
 			if (wbc.encountered_congestion || wbc.more_io)
-				congestion_wait(WRITE, HZ/10);
+				congestion_wait(BLK_RW_ASYNC, HZ/10);
 			else
 				break;	/* All the old data is written */
 		}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 5d714f8fb30..a0de15f4698 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -817,13 +817,15 @@ __rmqueue_fallback(struct zone *zone, int order, int start_migratetype)
 			 * agressive about taking ownership of free pages
 			 */
 			if (unlikely(current_order >= (pageblock_order >> 1)) ||
-					start_migratetype == MIGRATE_RECLAIMABLE) {
+					start_migratetype == MIGRATE_RECLAIMABLE ||
+					page_group_by_mobility_disabled) {
 				unsigned long pages;
 				pages = move_freepages_block(zone, page,
 								start_migratetype);
 
 				/* Claim the whole block if over half of it is free */
-				if (pages >= (1 << (pageblock_order-1)))
+				if (pages >= (1 << (pageblock_order-1)) ||
+						page_group_by_mobility_disabled)
 					set_pageblock_migratetype(page,
 								start_migratetype);
 
@@ -882,7 +884,7 @@ retry_reserve:
  */
 static int rmqueue_bulk(struct zone *zone, unsigned int order, 
 			unsigned long count, struct list_head *list,
-			int migratetype)
+			int migratetype, int cold)
 {
 	int i;
 	
@@ -901,7 +903,10 @@ static int rmqueue_bulk(struct zone *zone, unsigned int order,
 		 * merge IO requests if the physical pages are ordered
 		 * properly.
 		 */
-		list_add(&page->lru, list);
+		if (likely(cold == 0))
+			list_add(&page->lru, list);
+		else
+			list_add_tail(&page->lru, list);
 		set_page_private(page, migratetype);
 		list = &page->lru;
 	}
@@ -1119,7 +1124,8 @@ again:
 		local_irq_save(flags);
 		if (!pcp->count) {
 			pcp->count = rmqueue_bulk(zone, 0,
-					pcp->batch, &pcp->list, migratetype);
+					pcp->batch, &pcp->list,
+					migratetype, cold);
 			if (unlikely(!pcp->count))
 				goto failed;
 		}
@@ -1138,7 +1144,8 @@ again:
 		/* Allocate more to the pcp list if necessary */
 		if (unlikely(&page->lru == &pcp->list)) {
 			pcp->count += rmqueue_bulk(zone, 0,
-					pcp->batch, &pcp->list, migratetype);
+					pcp->batch, &pcp->list,
+					migratetype, cold);
 			page = list_entry(pcp->list.next, struct page, lru);
 		}
 
@@ -1666,7 +1673,7 @@ __alloc_pages_high_priority(gfp_t gfp_mask, unsigned int order,
 			preferred_zone, migratetype);
 
 		if (!page && gfp_mask & __GFP_NOFAIL)
-			congestion_wait(WRITE, HZ/50);
+			congestion_wait(BLK_RW_ASYNC, HZ/50);
 	} while (!page && (gfp_mask & __GFP_NOFAIL));
 
 	return page;
@@ -1740,8 +1747,10 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
 	 * be using allocators in order of preference for an area that is
 	 * too large.
 	 */
-	if (WARN_ON_ONCE(order >= MAX_ORDER))
+	if (order >= MAX_ORDER) {
+		WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN));
 		return NULL;
+	}
 
 	/*
 	 * GFP_THISNODE (meaning __GFP_THISNODE, __GFP_NORETRY and
@@ -1789,6 +1798,10 @@ rebalance:
 	if (p->flags & PF_MEMALLOC)
 		goto nopage;
 
+	/* Avoid allocations with no watermarks from looping endlessly */
+	if (test_thread_flag(TIF_MEMDIE) && !(gfp_mask & __GFP_NOFAIL))
+		goto nopage;
+
 	/* Try direct reclaim and then allocating */
 	page = __alloc_pages_direct_reclaim(gfp_mask, order,
 					zonelist, high_zoneidx,
@@ -1831,7 +1844,7 @@ rebalance:
 	pages_reclaimed += did_some_progress;
 	if (should_alloc_retry(gfp_mask, order, pages_reclaimed)) {
 		/* Wait for some write requests to complete then retry */
-		congestion_wait(WRITE, HZ/50);
+		congestion_wait(BLK_RW_ASYNC, HZ/50);
 		goto rebalance;
 	}
 
@@ -1983,7 +1996,7 @@ void *alloc_pages_exact(size_t size, gfp_t gfp_mask)
 		unsigned long alloc_end = addr + (PAGE_SIZE << order);
 		unsigned long used = addr + PAGE_ALIGN(size);
 
-		split_page(virt_to_page(addr), order);
+		split_page(virt_to_page((void *)addr), order);
 		while (used < alloc_end) {
 			free_page(used);
 			used += PAGE_SIZE;
@@ -2533,7 +2546,6 @@ static void build_zonelists(pg_data_t *pgdat)
 	prev_node = local_node;
 	nodes_clear(used_mask);
 
-	memset(node_load, 0, sizeof(node_load));
 	memset(node_order, 0, sizeof(node_order));
 	j = 0;
 
@@ -2642,6 +2654,9 @@ static int __build_all_zonelists(void *dummy)
 {
 	int nid;
 
+#ifdef CONFIG_NUMA
+	memset(node_load, 0, sizeof(node_load));
+#endif
 	for_each_online_node(nid) {
 		pg_data_t *pgdat = NODE_DATA(nid);
 
@@ -4032,6 +4047,8 @@ static void __init find_zone_movable_pfns_for_nodes(unsigned long *movable_pfn)
 	int i, nid;
 	unsigned long usable_startpfn;
 	unsigned long kernelcore_node, kernelcore_remaining;
+	/* save the state before borrow the nodemask */
+	nodemask_t saved_node_state = node_states[N_HIGH_MEMORY];
 	unsigned long totalpages = early_calculate_totalpages();
 	int usable_nodes = nodes_weight(node_states[N_HIGH_MEMORY]);
 
@@ -4059,7 +4076,7 @@ static void __init find_zone_movable_pfns_for_nodes(unsigned long *movable_pfn)
 
 	/* If kernelcore was not specified, there is no ZONE_MOVABLE */
 	if (!required_kernelcore)
-		return;
+		goto out;
 
 	/* usable_startpfn is the lowest possible pfn ZONE_MOVABLE can be at */
 	find_usable_zone_for_movable();
@@ -4158,6 +4175,10 @@ restart:
 	for (nid = 0; nid < MAX_NUMNODES; nid++)
 		zone_movable_pfn[nid] =
 			roundup(zone_movable_pfn[nid], MAX_ORDER_NR_PAGES);
+
+out:
+	/* restore the node_state */
+	node_states[N_HIGH_MEMORY] = saved_node_state;
 }
 
 /* Any regular memory on that node ? */
@@ -4242,11 +4263,6 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
 						early_node_map[i].start_pfn,
 						early_node_map[i].end_pfn);
 
-	/*
-	 * find_zone_movable_pfns_for_nodes/early_calculate_totalpages init
-	 * that node_mask, clear it at first
-	 */
-	nodes_clear(node_states[N_HIGH_MEMORY]);
 	/* Initialise every node */
 	mminit_verify_pageflags_layout();
 	setup_nr_node_ids();
@@ -4744,8 +4760,10 @@ void *__init alloc_large_system_hash(const char *tablename,
 			 * some pages at the end of hash table which
 			 * alloc_pages_exact() automatically does
 			 */
-			if (get_order(size) < MAX_ORDER)
+			if (get_order(size) < MAX_ORDER) {
 				table = alloc_pages_exact(size, GFP_ATOMIC);
+				kmemleak_alloc(table, size, 1, GFP_ATOMIC);
+			}
 		}
 	} while (!table && size > PAGE_SIZE && --log2qty);
 
@@ -4763,16 +4781,6 @@ void *__init alloc_large_system_hash(const char *tablename,
 	if (_hash_mask)
 		*_hash_mask = (1 << log2qty) - 1;
 
-	/*
-	 * If hashdist is set, the table allocation is done with __vmalloc()
-	 * which invokes the kmemleak_alloc() callback. This function may also
-	 * be called before the slab and kmemleak are initialised when
-	 * kmemleak simply buffers the request to be executed later
-	 * (GFP_ATOMIC flag ignored in this case).
-	 */
-	if (!hashdist)
-		kmemleak_alloc(table, size, 1, GFP_ATOMIC);
-
 	return table;
 }
 
diff --git a/mm/percpu.c b/mm/percpu.c
index c0b2c1a76e8..3311c8919f3 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -8,12 +8,12 @@
  *
  * This is percpu allocator which can handle both static and dynamic
  * areas.  Percpu areas are allocated in chunks in vmalloc area.  Each
- * chunk is consisted of num_possible_cpus() units and the first chunk
- * is used for static percpu variables in the kernel image (special
- * boot time alloc/init handling necessary as these areas need to be
- * brought up before allocation services are running).  Unit grows as
- * necessary and all units grow or shrink in unison.  When a chunk is
- * filled up, another chunk is allocated.  ie. in vmalloc area
+ * chunk is consisted of nr_cpu_ids units and the first chunk is used
+ * for static percpu variables in the kernel image (special boot time
+ * alloc/init handling necessary as these areas need to be brought up
+ * before allocation services are running).  Unit grows as necessary
+ * and all units grow or shrink in unison.  When a chunk is filled up,
+ * another chunk is allocated.  ie. in vmalloc area
  *
  *  c0                           c1                         c2
  *  -------------------          -------------------        ------------
@@ -197,7 +197,12 @@ static unsigned long pcpu_chunk_addr(struct pcpu_chunk *chunk,
 static bool pcpu_chunk_page_occupied(struct pcpu_chunk *chunk,
 				     int page_idx)
 {
-	return *pcpu_chunk_pagep(chunk, 0, page_idx) != NULL;
+	/*
+	 * Any possible cpu id can be used here, so there's no need to
+	 * worry about preemption or cpu hotplug.
+	 */
+	return *pcpu_chunk_pagep(chunk, raw_smp_processor_id(),
+				 page_idx) != NULL;
 }
 
 /* set the pointer to a chunk in a page struct */
@@ -297,6 +302,14 @@ static struct pcpu_chunk *pcpu_chunk_addr_search(void *addr)
 		return pcpu_first_chunk;
 	}
 
+	/*
+	 * The address is relative to unit0 which might be unused and
+	 * thus unmapped.  Offset the address to the unit space of the
+	 * current processor before looking it up in the vmalloc
+	 * space.  Note that any possible cpu id can be used here, so
+	 * there's no need to worry about preemption or cpu hotplug.
+	 */
+	addr += raw_smp_processor_id() * pcpu_unit_size;
 	return pcpu_get_page_chunk(vmalloc_to_page(addr));
 }
 
@@ -549,16 +562,16 @@ static void pcpu_free_area(struct pcpu_chunk *chunk, int freeme)
  * @chunk: chunk of interest
  * @page_start: page index of the first page to unmap
  * @page_end: page index of the last page to unmap + 1
- * @flush: whether to flush cache and tlb or not
+ * @flush_tlb: whether to flush tlb or not
  *
  * For each cpu, unmap pages [@page_start,@page_end) out of @chunk.
  * If @flush is true, vcache is flushed before unmapping and tlb
  * after.
  */
 static void pcpu_unmap(struct pcpu_chunk *chunk, int page_start, int page_end,
-		       bool flush)
+		       bool flush_tlb)
 {
-	unsigned int last = num_possible_cpus() - 1;
+	unsigned int last = nr_cpu_ids - 1;
 	unsigned int cpu;
 
 	/* unmap must not be done on immutable chunk */
@@ -569,9 +582,8 @@ static void pcpu_unmap(struct pcpu_chunk *chunk, int page_start, int page_end,
 	 * the whole region at once rather than doing it for each cpu.
 	 * This could be an overkill but is more scalable.
 	 */
-	if (flush)
-		flush_cache_vunmap(pcpu_chunk_addr(chunk, 0, page_start),
-				   pcpu_chunk_addr(chunk, last, page_end));
+	flush_cache_vunmap(pcpu_chunk_addr(chunk, 0, page_start),
+			   pcpu_chunk_addr(chunk, last, page_end));
 
 	for_each_possible_cpu(cpu)
 		unmap_kernel_range_noflush(
@@ -579,7 +591,7 @@ static void pcpu_unmap(struct pcpu_chunk *chunk, int page_start, int page_end,
 				(page_end - page_start) << PAGE_SHIFT);
 
 	/* ditto as flush_cache_vunmap() */
-	if (flush)
+	if (flush_tlb)
 		flush_tlb_kernel_range(pcpu_chunk_addr(chunk, 0, page_start),
 				       pcpu_chunk_addr(chunk, last, page_end));
 }
@@ -644,7 +656,7 @@ static void pcpu_depopulate_chunk(struct pcpu_chunk *chunk, int off, int size,
  */
 static int pcpu_map(struct pcpu_chunk *chunk, int page_start, int page_end)
 {
-	unsigned int last = num_possible_cpus() - 1;
+	unsigned int last = nr_cpu_ids - 1;
 	unsigned int cpu;
 	int err;
 
@@ -750,7 +762,7 @@ static struct pcpu_chunk *alloc_pcpu_chunk(void)
 	chunk->map[chunk->map_used++] = pcpu_unit_size;
 	chunk->page = chunk->page_ar;
 
-	chunk->vm = get_vm_area(pcpu_chunk_size, GFP_KERNEL);
+	chunk->vm = get_vm_area(pcpu_chunk_size, VM_ALLOC);
 	if (!chunk->vm) {
 		free_pcpu_chunk(chunk);
 		return NULL;
@@ -1068,9 +1080,9 @@ size_t __init pcpu_setup_first_chunk(pcpu_get_page_fn_t get_page_fn,
 					PFN_UP(size_sum));
 
 	pcpu_unit_size = pcpu_unit_pages << PAGE_SHIFT;
-	pcpu_chunk_size = num_possible_cpus() * pcpu_unit_size;
+	pcpu_chunk_size = nr_cpu_ids * pcpu_unit_size;
 	pcpu_chunk_struct_size = sizeof(struct pcpu_chunk)
-		+ num_possible_cpus() * pcpu_unit_pages * sizeof(struct page *);
+		+ nr_cpu_ids * pcpu_unit_pages * sizeof(struct page *);
 
 	if (dyn_size < 0)
 		dyn_size = pcpu_unit_size - static_size - reserved_size;
@@ -1234,6 +1246,7 @@ static struct page * __init pcpue_get_page(unsigned int cpu, int pageno)
 ssize_t __init pcpu_embed_first_chunk(size_t static_size, size_t reserved_size,
 				      ssize_t dyn_size, ssize_t unit_size)
 {
+	size_t chunk_size;
 	unsigned int cpu;
 
 	/* determine parameters and allocate */
@@ -1248,19 +1261,26 @@ ssize_t __init pcpu_embed_first_chunk(size_t static_size, size_t reserved_size,
 	} else
 		pcpue_unit_size = max_t(size_t, pcpue_size, PCPU_MIN_UNIT_SIZE);
 
-	pcpue_ptr = __alloc_bootmem_nopanic(
-					num_possible_cpus() * pcpue_unit_size,
-					PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
-	if (!pcpue_ptr)
+	chunk_size = pcpue_unit_size * nr_cpu_ids;
+
+	pcpue_ptr = __alloc_bootmem_nopanic(chunk_size, PAGE_SIZE,
+					    __pa(MAX_DMA_ADDRESS));
+	if (!pcpue_ptr) {
+		pr_warning("PERCPU: failed to allocate %zu bytes for "
+			   "embedding\n", chunk_size);
 		return -ENOMEM;
+	}
 
 	/* return the leftover and copy */
-	for_each_possible_cpu(cpu) {
+	for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
 		void *ptr = pcpue_ptr + cpu * pcpue_unit_size;
 
-		free_bootmem(__pa(ptr + pcpue_size),
-			     pcpue_unit_size - pcpue_size);
-		memcpy(ptr, __per_cpu_load, static_size);
+		if (cpu_possible(cpu)) {
+			free_bootmem(__pa(ptr + pcpue_size),
+				     pcpue_unit_size - pcpue_size);
+			memcpy(ptr, __per_cpu_load, static_size);
+		} else
+			free_bootmem(__pa(ptr), pcpue_unit_size);
 	}
 
 	/* we're ready, commit */
diff --git a/mm/rmap.c b/mm/rmap.c
index 836c6c63e1f..0895b5c7cbf 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -358,6 +358,7 @@ static int page_referenced_one(struct page *page,
 	 */
 	if (vma->vm_flags & VM_LOCKED) {
 		*mapcount = 1;	/* break early from loop */
+		*vm_flags |= VM_LOCKED;
 		goto out_unmap;
 	}
 
diff --git a/mm/slab.c b/mm/slab.c
index e74a16e4ced..7b5d4deacfc 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -1544,9 +1544,6 @@ void __init kmem_cache_init(void)
 	}
 
 	g_cpucache_up = EARLY;
-
-	/* Annotate slab for lockdep -- annotate the malloc caches */
-	init_lock_keys();
 }
 
 void __init kmem_cache_init_late(void)
@@ -1563,6 +1560,9 @@ void __init kmem_cache_init_late(void)
 	/* Done! */
 	g_cpucache_up = FULL;
 
+	/* Annotate slab for lockdep -- annotate the malloc caches */
+	init_lock_keys();
+
 	/*
 	 * Register a cpu startup notifier callback that initializes
 	 * cpu_cache_get for all new cpus
@@ -2547,7 +2547,7 @@ void kmem_cache_destroy(struct kmem_cache *cachep)
 	}
 
 	if (unlikely(cachep->flags & SLAB_DESTROY_BY_RCU))
-		synchronize_rcu();
+		rcu_barrier();
 
 	__kmem_cache_destroy(cachep);
 	mutex_unlock(&cache_chain_mutex);
diff --git a/mm/slob.c b/mm/slob.c
index c78742defdc..9641da3d5e5 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -595,6 +595,8 @@ EXPORT_SYMBOL(kmem_cache_create);
 void kmem_cache_destroy(struct kmem_cache *c)
 {
 	kmemleak_free(c);
+	if (c->flags & SLAB_DESTROY_BY_RCU)
+		rcu_barrier();
 	slob_free(c, sizeof(struct kmem_cache));
 }
 EXPORT_SYMBOL(kmem_cache_destroy);
diff --git a/mm/slub.c b/mm/slub.c
index 819f056b39c..b6276753626 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -21,7 +21,6 @@
 #include <linux/kmemcheck.h>
 #include <linux/cpu.h>
 #include <linux/cpuset.h>
-#include <linux/kmemleak.h>
 #include <linux/mempolicy.h>
 #include <linux/ctype.h>
 #include <linux/debugobjects.h>
@@ -2605,6 +2604,8 @@ void kmem_cache_destroy(struct kmem_cache *s)
 				"still has objects.\n", s->name, __func__);
 			dump_stack();
 		}
+		if (s->flags & SLAB_DESTROY_BY_RCU)
+			rcu_barrier();
 		sysfs_slab_remove(s);
 	} else
 		up_write(&slub_lock);
@@ -2833,13 +2834,15 @@ EXPORT_SYMBOL(__kmalloc);
 static void *kmalloc_large_node(size_t size, gfp_t flags, int node)
 {
 	struct page *page;
+	void *ptr = NULL;
 
 	flags |= __GFP_COMP | __GFP_NOTRACK;
 	page = alloc_pages_node(node, flags, get_order(size));
 	if (page)
-		return page_address(page);
-	else
-		return NULL;
+		ptr = page_address(page);
+
+	kmemleak_alloc(ptr, size, 1, flags);
+	return ptr;
 }
 
 #ifdef CONFIG_NUMA
@@ -2924,6 +2927,7 @@ void kfree(const void *x)
 	page = virt_to_head_page(x);
 	if (unlikely(!PageSlab(page))) {
 		BUG_ON(!PageCompound(page));
+		kmemleak_free(x);
 		put_page(page);
 		return;
 	}
diff --git a/mm/swapfile.c b/mm/swapfile.c
index d1ade1a48ee..8ffdc0d23c5 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -753,7 +753,7 @@ int swap_type_of(dev_t device, sector_t offset, struct block_device **bdev_p)
 
 		if (!bdev) {
 			if (bdev_p)
-				*bdev_p = bdget(sis->bdev->bd_dev);
+				*bdev_p = bdgrab(sis->bdev);
 
 			spin_unlock(&swap_lock);
 			return i;
@@ -765,7 +765,7 @@ int swap_type_of(dev_t device, sector_t offset, struct block_device **bdev_p)
 					struct swap_extent, list);
 			if (se->start_block == offset) {
 				if (bdev_p)
-					*bdev_p = bdget(sis->bdev->bd_dev);
+					*bdev_p = bdgrab(sis->bdev);
 
 				spin_unlock(&swap_lock);
 				bdput(bdev);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 54155268dfc..94e86dd6954 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -630,9 +630,14 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 
 		referenced = page_referenced(page, 1,
 						sc->mem_cgroup, &vm_flags);
-		/* In active use or really unfreeable?  Activate it. */
+		/*
+		 * In active use or really unfreeable?  Activate it.
+		 * If page which have PG_mlocked lost isoltation race,
+		 * try_to_unmap moves it to unevictable list
+		 */
 		if (sc->order <= PAGE_ALLOC_COSTLY_ORDER &&
-					referenced && page_mapping_inuse(page))
+					referenced && page_mapping_inuse(page)
+					&& !(vm_flags & VM_LOCKED))
 			goto activate_locked;
 
 		/*
@@ -1104,7 +1109,7 @@ static unsigned long shrink_inactive_list(unsigned long max_scan,
 		 */
 		if (nr_freed < nr_taken && !current_is_kswapd() &&
 		    lumpy_reclaim) {
-			congestion_wait(WRITE, HZ/10);
+			congestion_wait(BLK_RW_ASYNC, HZ/10);
 
 			/*
 			 * The attempt at page out may have made some
@@ -1721,7 +1726,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 
 		/* Take a nap, wait for some writeback to complete */
 		if (sc->nr_scanned && priority < DEF_PRIORITY - 2)
-			congestion_wait(WRITE, HZ/10);
+			congestion_wait(BLK_RW_ASYNC, HZ/10);
 	}
 	/* top priority shrink_zones still had more to do? don't OOM, then */
 	if (!sc->all_unreclaimable && scanning_global_lru(sc))
@@ -1960,7 +1965,7 @@ loop_again:
 		 * another pass across the zones.
 		 */
 		if (total_scanned && priority < DEF_PRIORITY - 2)
-			congestion_wait(WRITE, HZ/10);
+			congestion_wait(BLK_RW_ASYNC, HZ/10);
 
 		/*
 		 * We do this so kswapd doesn't build up large priorities for
@@ -2233,7 +2238,7 @@ unsigned long shrink_all_memory(unsigned long nr_pages)
 				goto out;
 
 			if (sc.nr_scanned && prio < DEF_PRIORITY - 2)
-				congestion_wait(WRITE, HZ / 10);
+				congestion_wait(BLK_RW_ASYNC, HZ / 10);
 		}
 	}
 
diff --git a/net/9p/client.c b/net/9p/client.c
index dd43a8289b0..5bf5f227dbe 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -60,9 +60,9 @@ static struct p9_req_t *
 p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...);
 
 /**
- * v9fs_parse_options - parse mount options into session structure
- * @options: options string passed from mount
- * @v9ses: existing v9fs session information
+ * parse_options - parse mount options into client structure
+ * @opts: options string passed from mount
+ * @clnt: existing v9fs client information
  *
  * Return 0 upon success, -ERRNO upon failure
  */
@@ -117,9 +117,6 @@ static int parse_opts(char *opts, struct p9_client *clnt)
 		}
 	}
 
-	if (!clnt->trans_mod)
-		clnt->trans_mod = v9fs_get_default_trans();
-
 	kfree(options);
 	return ret;
 }
@@ -235,7 +232,7 @@ EXPORT_SYMBOL(p9_tag_lookup);
 
 /**
  * p9_tag_init - setup tags structure and contents
- * @tags: tags structure from the client struct
+ * @c:  v9fs client struct
  *
  * This initializes the tags structure for each client instance.
  *
@@ -261,7 +258,7 @@ error:
 
 /**
  * p9_tag_cleanup - cleans up tags structure and reclaims resources
- * @tags: tags structure from the client struct
+ * @c:  v9fs client struct
  *
  * This frees resources associated with the tags structure
  *
@@ -414,14 +411,9 @@ static int p9_check_errors(struct p9_client *c, struct p9_req_t *req)
 		if (c->dotu)
 			err = -ecode;
 
-		if (!err) {
+		if (!err || !IS_ERR_VALUE(err))
 			err = p9_errstr2errno(ename, strlen(ename));
 
-			/* string match failed */
-			if (!err)
-				err = -ESERVERFAULT;
-		}
-
 		P9_DPRINTK(P9_DEBUG_9P, "<<< RERROR (%d) %s\n", -ecode, ename);
 
 		kfree(ename);
@@ -433,8 +425,8 @@ static int p9_check_errors(struct p9_client *c, struct p9_req_t *req)
 
 /**
  * p9_client_flush - flush (cancel) a request
- * c: client state
- * req: request to cancel
+ * @c: client state
+ * @oldreq: request to cancel
  *
  * This sents a flush for a particular requests and links
  * the flush request to the original request.  The current
@@ -689,6 +681,9 @@ struct p9_client *p9_client_create(const char *dev_name, char *options)
 	if (err < 0)
 		goto error;
 
+	if (!clnt->trans_mod)
+		clnt->trans_mod = v9fs_get_default_trans();
+
 	if (clnt->trans_mod == NULL) {
 		err = -EPROTONOSUPPORT;
 		P9_DPRINTK(P9_DEBUG_ERROR,
@@ -1098,7 +1093,6 @@ p9_client_read(struct p9_fid *fid, char *data, char __user *udata, u64 offset,
 
 	if (data) {
 		memmove(data, dataptr, count);
-		data += count;
 	}
 
 	if (udata) {
@@ -1192,9 +1186,9 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid)
 
 	err = p9pdu_readf(req->rc, clnt->dotu, "wS", &ignored, ret);
 	if (err) {
-		ret = ERR_PTR(err);
 		p9pdu_dump(1, req->rc);
-		goto free_and_error;
+		p9_free_req(clnt, req);
+		goto error;
 	}
 
 	P9_DPRINTK(P9_DEBUG_9P,
@@ -1211,8 +1205,6 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid)
 	p9_free_req(clnt, req);
 	return ret;
 
-free_and_error:
-	p9_free_req(clnt, req);
 error:
 	kfree(ret);
 	return ERR_PTR(err);
diff --git a/net/9p/error.c b/net/9p/error.c
index fdebe431406..52518512a93 100644
--- a/net/9p/error.c
+++ b/net/9p/error.c
@@ -239,7 +239,7 @@ int p9_errstr2errno(char *errstr, int len)
 		errstr[len] = 0;
 		printk(KERN_ERR "%s: server reported unknown error %s\n",
 			__func__, errstr);
-		errno = 1;
+		errno = ESERVERFAULT;
 	}
 
 	return -errno;
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index a2a1814c7a8..8d934dd7fd5 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -119,8 +119,8 @@ struct p9_poll_wait {
  * @wpos: write position for current frame
  * @wsize: amount of data to write for current frame
  * @wbuf: current write buffer
+ * @poll_pending_link: pending links to be polled per conn
  * @poll_wait: array of wait_q's for various worker threads
- * @poll_waddr: ????
  * @pt: poll state
  * @rq: current read work
  * @wq: current write work
@@ -700,9 +700,9 @@ static int p9_fd_cancel(struct p9_client *client, struct p9_req_t *req)
 }
 
 /**
- * parse_options - parse mount options into session structure
- * @options: options string passed from mount
- * @opts: transport-specific structure to parse options into
+ * parse_opts - parse mount options into p9_fd_opts structure
+ * @params: options string passed from mount
+ * @opts: fd transport-specific structure to parse options into
  *
  * Returns 0 upon success, -ERRNO upon failure
  */
@@ -735,12 +735,14 @@ static int parse_opts(char *params, struct p9_fd_opts *opts)
 		if (!*p)
 			continue;
 		token = match_token(p, tokens, args);
-		r = match_int(&args[0], &option);
-		if (r < 0) {
-			P9_DPRINTK(P9_DEBUG_ERROR,
-			 "integer field, but no integer?\n");
-			ret = r;
-			continue;
+		if (token != Opt_err) {
+			r = match_int(&args[0], &option);
+			if (r < 0) {
+				P9_DPRINTK(P9_DEBUG_ERROR,
+				"integer field, but no integer?\n");
+				ret = r;
+				continue;
+			}
 		}
 		switch (token) {
 		case Opt_port:
diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c
index ac4990041eb..65cb29db03f 100644
--- a/net/9p/trans_rdma.c
+++ b/net/9p/trans_rdma.c
@@ -67,14 +67,15 @@
  * @pd: Protection Domain pointer
  * @qp: Queue Pair pointer
  * @cq: Completion Queue pointer
+ * @dm_mr: DMA Memory Region pointer
  * @lkey: The local access only memory region key
  * @timeout: Number of uSecs to wait for connection management events
  * @sq_depth: The depth of the Send Queue
  * @sq_sem: Semaphore for the SQ
  * @rq_depth: The depth of the Receive Queue.
+ * @rq_count: Count of requests in the Receive Queue.
  * @addr: The remote peer's address
  * @req_lock: Protects the active request list
- * @send_wait: Wait list when the SQ fills up
  * @cm_done: Completion event for connection management tracking
  */
 struct p9_trans_rdma {
@@ -154,9 +155,9 @@ static match_table_t tokens = {
 };
 
 /**
- * parse_options - parse mount options into session structure
- * @options: options string passed from mount
- * @opts: transport-specific structure to parse options into
+ * parse_opts - parse mount options into rdma options structure
+ * @params: options string passed from mount
+ * @opts: rdma transport-specific structure to parse options into
  *
  * Returns 0 upon success, -ERRNO upon failure
  */
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index a49484e67e1..9bf0b737aa5 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -57,11 +57,9 @@ static int chan_index;
  * @initialized: whether the channel is initialized
  * @inuse: whether the channel is in use
  * @lock: protects multiple elements within this structure
+ * @client: client instance
  * @vdev: virtio dev associated with this channel
  * @vq: virtio queue associated with this channel
- * @tagpool: accounting for tag ids (and request slots)
- * @reqs: array of request slots
- * @max_tag: current number of request_slots allocated
  * @sg: scatter gather list which is used to pack a request (protected?)
  *
  * We keep all per-channel information in a structure.
@@ -92,7 +90,7 @@ static unsigned int rest_of_page(void *data)
 
 /**
  * p9_virtio_close - reclaim resources of a channel
- * @trans: transport state
+ * @client: client instance
  *
  * This reclaims a channel by freeing its resources and
  * reseting its inuse flag.
@@ -181,9 +179,8 @@ static int p9_virtio_cancel(struct p9_client *client, struct p9_req_t *req)
 
 /**
  * p9_virtio_request - issue a request
- * @t: transport state
- * @tc: &p9_fcall request to transmit
- * @rc: &p9_fcall to put reponse into
+ * @client: client instance issuing the request
+ * @req: request to be issued
  *
  */
 
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 590b8396362..875eda5dbad 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -54,6 +54,7 @@
 #include <linux/capability.h>
 #include <linux/module.h>
 #include <linux/if_arp.h>
+#include <linux/smp_lock.h>
 #include <linux/termios.h>	/* For TIOCOUTQ/INQ */
 #include <net/datalink.h>
 #include <net/psnap.h>
@@ -1237,6 +1238,7 @@ static int atalk_getname(struct socket *sock, struct sockaddr *uaddr,
 			return -ENOBUFS;
 
 	*uaddr_len = sizeof(struct sockaddr_at);
+	memset(&sat.sat_zero, 0, sizeof(sat.sat_zero));
 
 	if (peer) {
 		if (sk->sk_state != TCP_ESTABLISHED)
diff --git a/net/atm/common.c b/net/atm/common.c
index c1c97936192..8c4d843eb17 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -92,7 +92,7 @@ static void vcc_sock_destruct(struct sock *sk)
 static void vcc_def_wakeup(struct sock *sk)
 {
 	read_lock(&sk->sk_callback_lock);
-	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+	if (sk_has_sleeper(sk))
 		wake_up(sk->sk_sleep);
 	read_unlock(&sk->sk_callback_lock);
 }
@@ -110,7 +110,7 @@ static void vcc_write_space(struct sock *sk)
 	read_lock(&sk->sk_callback_lock);
 
 	if (vcc_writable(sk)) {
-		if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+		if (sk_has_sleeper(sk))
 			wake_up_interruptible(sk->sk_sleep);
 
 		sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
@@ -594,7 +594,7 @@ unsigned int vcc_poll(struct file *file, struct socket *sock, poll_table *wait)
 	struct atm_vcc *vcc;
 	unsigned int mask;
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 	mask = 0;
 
 	vcc = ATM_SD(sock);
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index e50566ebf9f..94b3388c188 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -2080,28 +2080,41 @@ static CLASS_ATTR(rfcomm_dlc, S_IRUGO, rfcomm_dlc_sysfs_show, NULL);
 /* ---- Initialization ---- */
 static int __init rfcomm_init(void)
 {
+	int ret;
+
 	l2cap_load();
 
 	hci_register_cb(&rfcomm_cb);
 
 	rfcomm_thread = kthread_run(rfcomm_run, NULL, "krfcommd");
 	if (IS_ERR(rfcomm_thread)) {
-		hci_unregister_cb(&rfcomm_cb);
-		return PTR_ERR(rfcomm_thread);
+		ret = PTR_ERR(rfcomm_thread);
+		goto out_thread;
 	}
 
 	if (class_create_file(bt_class, &class_attr_rfcomm_dlc) < 0)
 		BT_ERR("Failed to create RFCOMM info file");
 
-	rfcomm_init_sockets();
+	ret = rfcomm_init_ttys();
+	if (ret)
+		goto out_tty;
 
-#ifdef CONFIG_BT_RFCOMM_TTY
-	rfcomm_init_ttys();
-#endif
+	ret = rfcomm_init_sockets();
+	if (ret)
+		goto out_sock;
 
 	BT_INFO("RFCOMM ver %s", VERSION);
 
 	return 0;
+
+out_sock:
+	rfcomm_cleanup_ttys();
+out_tty:
+	kthread_stop(rfcomm_thread);
+out_thread:
+	hci_unregister_cb(&rfcomm_cb);
+
+	return ret;
 }
 
 static void __exit rfcomm_exit(void)
@@ -2112,9 +2125,7 @@ static void __exit rfcomm_exit(void)
 
 	kthread_stop(rfcomm_thread);
 
-#ifdef CONFIG_BT_RFCOMM_TTY
 	rfcomm_cleanup_ttys();
-#endif
 
 	rfcomm_cleanup_sockets();
 }
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 7f482784e9f..0b85e811685 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -1132,7 +1132,7 @@ error:
 	return err;
 }
 
-void __exit rfcomm_cleanup_sockets(void)
+void rfcomm_cleanup_sockets(void)
 {
 	class_remove_file(bt_class, &class_attr_rfcomm);
 
diff --git a/net/bridge/br.c b/net/bridge/br.c
index 9aac5213105..e1241c76239 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -93,7 +93,7 @@ static void __exit br_deinit(void)
 
 	unregister_pernet_subsys(&br_net_ops);
 
-	synchronize_net();
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 
 	br_netfilter_fini();
 #if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 8a96672e2c5..eb404dc3ed6 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -424,7 +424,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev)
 err2:
 	br_fdb_delete_by_port(br, p, 1);
 err1:
-	kobject_del(&p->kobj);
+	kobject_put(&p->kobj);
 err0:
 	dev_set_promiscuity(dev, -1);
 put_back:
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 95d7f32643a..72720c71035 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -75,6 +75,7 @@ static __initdata const char banner[] = KERN_INFO
 MODULE_DESCRIPTION("PF_CAN broadcast manager protocol");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>");
+MODULE_ALIAS("can-proto-2");
 
 /* easy access to can_frame payload */
 static inline u64 GET_U64(const struct can_frame *cp)
@@ -1469,6 +1470,9 @@ static int bcm_release(struct socket *sock)
 		bo->ifindex = 0;
 	}
 
+	sock_orphan(sk);
+	sock->sk = NULL;
+
 	release_sock(sk);
 	sock_put(sk);
 
diff --git a/net/can/raw.c b/net/can/raw.c
index 6aa154e806a..db3152df7d2 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -62,6 +62,7 @@ static __initdata const char banner[] =
 MODULE_DESCRIPTION("PF_CAN raw protocol");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_AUTHOR("Urs Thuermann <urs.thuermann@volkswagen.de>");
+MODULE_ALIAS("can-proto-1");
 
 #define MASK_ALL 0
 
@@ -306,6 +307,9 @@ static int raw_release(struct socket *sock)
 	ro->bound   = 0;
 	ro->count   = 0;
 
+	sock_orphan(sk);
+	sock->sk = NULL;
+
 	release_sock(sk);
 	sock_put(sk);
 
@@ -397,6 +401,7 @@ static int raw_getname(struct socket *sock, struct sockaddr *uaddr,
 	if (peer)
 		return -EOPNOTSUPP;
 
+	memset(addr, 0, sizeof(*addr));
 	addr->can_family  = AF_CAN;
 	addr->can_ifindex = ro->ifindex;
 
diff --git a/net/core/datagram.c b/net/core/datagram.c
index 58abee1f1df..b0fe69211ee 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -712,7 +712,7 @@ unsigned int datagram_poll(struct file *file, struct socket *sock,
 	struct sock *sk = sock->sk;
 	unsigned int mask;
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 	mask = 0;
 
 	/* exceptional events? */
diff --git a/net/core/dev.c b/net/core/dev.c
index 60b57281227..6a94475aee8 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2823,9 +2823,11 @@ static void net_rx_action(struct softirq_action *h)
 		 * move the instance around on the list at-will.
 		 */
 		if (unlikely(work == weight)) {
-			if (unlikely(napi_disable_pending(n)))
-				__napi_complete(n);
-			else
+			if (unlikely(napi_disable_pending(n))) {
+				local_irq_enable();
+				napi_complete(n);
+				local_irq_disable();
+			} else
 				list_move_tail(&n->poll_list, list);
 		}
 
@@ -3863,10 +3865,12 @@ int dev_unicast_delete(struct net_device *dev, void *addr)
 
 	ASSERT_RTNL();
 
+	netif_addr_lock_bh(dev);
 	err = __hw_addr_del(&dev->uc, addr, dev->addr_len,
 			    NETDEV_HW_ADDR_T_UNICAST);
 	if (!err)
 		__dev_set_rx_mode(dev);
+	netif_addr_unlock_bh(dev);
 	return err;
 }
 EXPORT_SYMBOL(dev_unicast_delete);
@@ -3887,10 +3891,12 @@ int dev_unicast_add(struct net_device *dev, void *addr)
 
 	ASSERT_RTNL();
 
+	netif_addr_lock_bh(dev);
 	err = __hw_addr_add(&dev->uc, addr, dev->addr_len,
 			    NETDEV_HW_ADDR_T_UNICAST);
 	if (!err)
 		__dev_set_rx_mode(dev);
+	netif_addr_unlock_bh(dev);
 	return err;
 }
 EXPORT_SYMBOL(dev_unicast_add);
@@ -3947,7 +3953,8 @@ void __dev_addr_unsync(struct dev_addr_list **to, int *to_count,
  *	@from: source device
  *
  *	Add newly added addresses to the destination device and release
- *	addresses that have no users left.
+ *	addresses that have no users left. The source device must be
+ *	locked by netif_tx_lock_bh.
  *
  *	This function is intended to be called from the dev->set_rx_mode
  *	function of layered software devices.
@@ -3956,14 +3963,14 @@ int dev_unicast_sync(struct net_device *to, struct net_device *from)
 {
 	int err = 0;
 
-	ASSERT_RTNL();
-
 	if (to->addr_len != from->addr_len)
 		return -EINVAL;
 
+	netif_addr_lock_bh(to);
 	err = __hw_addr_sync(&to->uc, &from->uc, to->addr_len);
 	if (!err)
 		__dev_set_rx_mode(to);
+	netif_addr_unlock_bh(to);
 	return err;
 }
 EXPORT_SYMBOL(dev_unicast_sync);
@@ -3979,27 +3986,27 @@ EXPORT_SYMBOL(dev_unicast_sync);
  */
 void dev_unicast_unsync(struct net_device *to, struct net_device *from)
 {
-	ASSERT_RTNL();
-
 	if (to->addr_len != from->addr_len)
 		return;
 
+	netif_addr_lock_bh(from);
+	netif_addr_lock(to);
 	__hw_addr_unsync(&to->uc, &from->uc, to->addr_len);
 	__dev_set_rx_mode(to);
+	netif_addr_unlock(to);
+	netif_addr_unlock_bh(from);
 }
 EXPORT_SYMBOL(dev_unicast_unsync);
 
 static void dev_unicast_flush(struct net_device *dev)
 {
-	/* rtnl_mutex must be held here */
-
+	netif_addr_lock_bh(dev);
 	__hw_addr_flush(&dev->uc);
+	netif_addr_unlock_bh(dev);
 }
 
 static void dev_unicast_init(struct net_device *dev)
 {
-	/* rtnl_mutex must be held here */
-
 	__hw_addr_init(&dev->uc);
 }
 
diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c
index 78e5bfc454a..493775f4f2f 100644
--- a/net/core/gen_estimator.c
+++ b/net/core/gen_estimator.c
@@ -81,7 +81,7 @@
 struct gen_estimator
 {
 	struct list_head	list;
-	struct gnet_stats_basic	*bstats;
+	struct gnet_stats_basic_packed	*bstats;
 	struct gnet_stats_rate_est	*rate_est;
 	spinlock_t		*stats_lock;
 	int			ewma_log;
@@ -165,7 +165,7 @@ static void gen_add_node(struct gen_estimator *est)
 }
 
 static
-struct gen_estimator *gen_find_node(const struct gnet_stats_basic *bstats,
+struct gen_estimator *gen_find_node(const struct gnet_stats_basic_packed *bstats,
 				    const struct gnet_stats_rate_est *rate_est)
 {
 	struct rb_node *p = est_root.rb_node;
@@ -202,7 +202,7 @@ struct gen_estimator *gen_find_node(const struct gnet_stats_basic *bstats,
  *
  * NOTE: Called under rtnl_mutex
  */
-int gen_new_estimator(struct gnet_stats_basic *bstats,
+int gen_new_estimator(struct gnet_stats_basic_packed *bstats,
 		      struct gnet_stats_rate_est *rate_est,
 		      spinlock_t *stats_lock,
 		      struct nlattr *opt)
@@ -262,7 +262,7 @@ static void __gen_kill_estimator(struct rcu_head *head)
  *
  * NOTE: Called under rtnl_mutex
  */
-void gen_kill_estimator(struct gnet_stats_basic *bstats,
+void gen_kill_estimator(struct gnet_stats_basic_packed *bstats,
 			struct gnet_stats_rate_est *rate_est)
 {
 	struct gen_estimator *e;
@@ -292,7 +292,7 @@ EXPORT_SYMBOL(gen_kill_estimator);
  *
  * Returns 0 on success or a negative error code.
  */
-int gen_replace_estimator(struct gnet_stats_basic *bstats,
+int gen_replace_estimator(struct gnet_stats_basic_packed *bstats,
 			  struct gnet_stats_rate_est *rate_est,
 			  spinlock_t *stats_lock, struct nlattr *opt)
 {
@@ -308,7 +308,7 @@ EXPORT_SYMBOL(gen_replace_estimator);
  *
  * Returns true if estimator is active, and false if not.
  */
-bool gen_estimator_active(const struct gnet_stats_basic *bstats,
+bool gen_estimator_active(const struct gnet_stats_basic_packed *bstats,
 			  const struct gnet_stats_rate_est *rate_est)
 {
 	ASSERT_RTNL();
diff --git a/net/core/gen_stats.c b/net/core/gen_stats.c
index c3d0ffeac24..8569310268a 100644
--- a/net/core/gen_stats.c
+++ b/net/core/gen_stats.c
@@ -106,16 +106,21 @@ gnet_stats_start_copy(struct sk_buff *skb, int type, spinlock_t *lock,
  * if the room in the socket buffer was not sufficient.
  */
 int
-gnet_stats_copy_basic(struct gnet_dump *d, struct gnet_stats_basic *b)
+gnet_stats_copy_basic(struct gnet_dump *d, struct gnet_stats_basic_packed *b)
 {
 	if (d->compat_tc_stats) {
 		d->tc_stats.bytes = b->bytes;
 		d->tc_stats.packets = b->packets;
 	}
 
-	if (d->tail)
-		return gnet_stats_copy(d, TCA_STATS_BASIC, b, sizeof(*b));
+	if (d->tail) {
+		struct gnet_stats_basic sb;
 
+		memset(&sb, 0, sizeof(sb));
+		sb.bytes = b->bytes;
+		sb.packets = b->packets;
+		return gnet_stats_copy(d, TCA_STATS_BASIC, &sb, sizeof(sb));
+	}
 	return 0;
 }
 
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index b7292a2719d..197283072cc 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -488,7 +488,7 @@ int net_assign_generic(struct net *net, int id, void *data)
 	 */
 
 	ng->len = id;
-	memcpy(&ng->ptr, &old_ng->ptr, old_ng->len);
+	memcpy(&ng->ptr, &old_ng->ptr, old_ng->len * sizeof(void*));
 
 	rcu_assign_pointer(net->gen, ng);
 	call_rcu(&old_ng->rcu, net_generic_release);
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 9675f312830..1b76eb11deb 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -319,6 +319,11 @@ static void netpoll_send_skb(struct netpoll *np, struct sk_buff *skb)
 
 			udelay(USEC_PER_POLL);
 		}
+
+		WARN_ONCE(!irqs_disabled(),
+			"netpoll_send_skb(): %s enabled interrupts in poll (%pF)\n",
+			dev->name, ops->ndo_start_xmit);
+
 		local_irq_restore(flags);
 	}
 
@@ -740,7 +745,7 @@ int netpoll_setup(struct netpoll *np)
 				       np->name);
 				break;
 			}
-			cond_resched();
+			msleep(1);
 		}
 
 		/* If carrier appears to come up instantly, we don't
diff --git a/net/core/sock.c b/net/core/sock.c
index b0ba569bc97..76334228ed1 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -631,7 +631,7 @@ set_rcvbuf:
 
 	case SO_TIMESTAMPING:
 		if (val & ~SOF_TIMESTAMPING_MASK) {
-			ret = EINVAL;
+			ret = -EINVAL;
 			break;
 		}
 		sock_valbool_flag(sk, SOCK_TIMESTAMPING_TX_HARDWARE,
@@ -919,13 +919,19 @@ static inline void sock_lock_init(struct sock *sk)
 			af_family_keys + sk->sk_family);
 }
 
+/*
+ * Copy all fields from osk to nsk but nsk->sk_refcnt must not change yet,
+ * even temporarly, because of RCU lookups. sk_node should also be left as is.
+ */
 static void sock_copy(struct sock *nsk, const struct sock *osk)
 {
 #ifdef CONFIG_SECURITY_NETWORK
 	void *sptr = nsk->sk_security;
 #endif
-
-	memcpy(nsk, osk, osk->sk_prot->obj_size);
+	BUILD_BUG_ON(offsetof(struct sock, sk_copy_start) !=
+		     sizeof(osk->sk_node) + sizeof(osk->sk_refcnt));
+	memcpy(&nsk->sk_copy_start, &osk->sk_copy_start,
+	       osk->sk_prot->obj_size - offsetof(struct sock, sk_copy_start));
 #ifdef CONFIG_SECURITY_NETWORK
 	nsk->sk_security = sptr;
 	security_sk_clone(osk, nsk);
@@ -939,8 +945,23 @@ static struct sock *sk_prot_alloc(struct proto *prot, gfp_t priority,
 	struct kmem_cache *slab;
 
 	slab = prot->slab;
-	if (slab != NULL)
-		sk = kmem_cache_alloc(slab, priority);
+	if (slab != NULL) {
+		sk = kmem_cache_alloc(slab, priority & ~__GFP_ZERO);
+		if (!sk)
+			return sk;
+		if (priority & __GFP_ZERO) {
+			/*
+			 * caches using SLAB_DESTROY_BY_RCU should let
+			 * sk_node.next un-modified. Special care is taken
+			 * when initializing object to zero.
+			 */
+			if (offsetof(struct sock, sk_node.next) != 0)
+				memset(sk, 0, offsetof(struct sock, sk_node.next));
+			memset(&sk->sk_node.pprev, 0,
+			       prot->obj_size - offsetof(struct sock,
+							 sk_node.pprev));
+		}
+	}
 	else
 		sk = kmalloc(prot->obj_size, priority);
 
@@ -1004,6 +1025,7 @@ struct sock *sk_alloc(struct net *net, int family, gfp_t priority,
 		sk->sk_prot = sk->sk_prot_creator = prot;
 		sock_lock_init(sk);
 		sock_net_set(sk, get_net(net));
+		atomic_set(&sk->sk_wmem_alloc, 1);
 	}
 
 	return sk;
@@ -1125,6 +1147,11 @@ struct sock *sk_clone(const struct sock *sk, const gfp_t priority)
 
 		newsk->sk_err	   = 0;
 		newsk->sk_priority = 0;
+		/*
+		 * Before updating sk_refcnt, we must commit prior changes to memory
+		 * (Documentation/RCU/rculist_nulls.txt for details)
+		 */
+		smp_wmb();
 		atomic_set(&newsk->sk_refcnt, 2);
 
 		/*
@@ -1715,7 +1742,7 @@ EXPORT_SYMBOL(sock_no_sendpage);
 static void sock_def_wakeup(struct sock *sk)
 {
 	read_lock(&sk->sk_callback_lock);
-	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+	if (sk_has_sleeper(sk))
 		wake_up_interruptible_all(sk->sk_sleep);
 	read_unlock(&sk->sk_callback_lock);
 }
@@ -1723,7 +1750,7 @@ static void sock_def_wakeup(struct sock *sk)
 static void sock_def_error_report(struct sock *sk)
 {
 	read_lock(&sk->sk_callback_lock);
-	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+	if (sk_has_sleeper(sk))
 		wake_up_interruptible_poll(sk->sk_sleep, POLLERR);
 	sk_wake_async(sk, SOCK_WAKE_IO, POLL_ERR);
 	read_unlock(&sk->sk_callback_lock);
@@ -1732,7 +1759,7 @@ static void sock_def_error_report(struct sock *sk)
 static void sock_def_readable(struct sock *sk, int len)
 {
 	read_lock(&sk->sk_callback_lock);
-	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+	if (sk_has_sleeper(sk))
 		wake_up_interruptible_sync_poll(sk->sk_sleep, POLLIN |
 						POLLRDNORM | POLLRDBAND);
 	sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_IN);
@@ -1747,7 +1774,7 @@ static void sock_def_write_space(struct sock *sk)
 	 * progress.  --DaveM
 	 */
 	if ((atomic_read(&sk->sk_wmem_alloc) << 1) <= sk->sk_sndbuf) {
-		if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+		if (sk_has_sleeper(sk))
 			wake_up_interruptible_sync_poll(sk->sk_sleep, POLLOUT |
 						POLLWRNORM | POLLWRBAND);
 
@@ -1840,8 +1867,12 @@ void sock_init_data(struct socket *sock, struct sock *sk)
 
 	sk->sk_stamp = ktime_set(-1L, 0);
 
+	/*
+	 * Before updating sk_refcnt, we must commit prior changes to memory
+	 * (Documentation/RCU/rculist_nulls.txt for details)
+	 */
+	smp_wmb();
 	atomic_set(&sk->sk_refcnt, 1);
-	atomic_set(&sk->sk_wmem_alloc, 1);
 	atomic_set(&sk->sk_drops, 0);
 }
 EXPORT_SYMBOL(sock_init_data);
diff --git a/net/dccp/output.c b/net/dccp/output.c
index c0e88c16d08..c96119fda68 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -196,7 +196,7 @@ void dccp_write_space(struct sock *sk)
 {
 	read_lock(&sk->sk_callback_lock);
 
-	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+	if (sk_has_sleeper(sk))
 		wake_up_interruptible(sk->sk_sleep);
 	/* Should agree with poll, otherwise some programs break */
 	if (sock_writeable(sk))
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index 314a1b5c033..1bca9205104 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -311,7 +311,7 @@ unsigned int dccp_poll(struct file *file, struct socket *sock,
 	unsigned int mask;
 	struct sock *sk = sock->sk;
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 	if (sk->sk_state == DCCP_LISTEN)
 		return inet_csk_listen_poll(sk);
 
@@ -1066,7 +1066,7 @@ static int __init dccp_init(void)
 		       (dccp_hashinfo.ehash_size - 1))
 			dccp_hashinfo.ehash_size--;
 		dccp_hashinfo.ehash = (struct inet_ehash_bucket *)
-			__get_free_pages(GFP_ATOMIC, ehash_order);
+			__get_free_pages(GFP_ATOMIC|__GFP_NOWARN, ehash_order);
 	} while (!dccp_hashinfo.ehash && --ehash_order > 0);
 
 	if (!dccp_hashinfo.ehash) {
@@ -1091,7 +1091,7 @@ static int __init dccp_init(void)
 		    bhash_order > 0)
 			continue;
 		dccp_hashinfo.bhash = (struct inet_bind_hashbucket *)
-			__get_free_pages(GFP_ATOMIC, bhash_order);
+			__get_free_pages(GFP_ATOMIC|__GFP_NOWARN, bhash_order);
 	} while (!dccp_hashinfo.bhash && --bhash_order >= 0);
 
 	if (!dccp_hashinfo.bhash) {
@@ -1159,6 +1159,7 @@ static void __exit dccp_fini(void)
 	kmem_cache_destroy(dccp_hashinfo.bind_bucket_cachep);
 	dccp_ackvec_exit();
 	dccp_sysctl_exit();
+	percpu_counter_destroy(&dccp_orphan_count);
 }
 
 module_init(dccp_init);
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index d351b8db0df..77d40289653 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -2413,6 +2413,8 @@ static void __exit decnet_exit(void)
 	proc_net_remove(&init_net, "decnet");
 
 	proto_unregister(&dn_proto);
+
+	rcu_barrier_bh(); /* Wait for completion of call_rcu_bh()'s */
 }
 module_exit(decnet_exit);
 #endif
diff --git a/net/dsa/mv88e6xxx.c b/net/dsa/mv88e6xxx.c
index 4e4d8b5ad03..efe661a9def 100644
--- a/net/dsa/mv88e6xxx.c
+++ b/net/dsa/mv88e6xxx.c
@@ -418,7 +418,7 @@ static int mv88e6xxx_stats_wait(struct dsa_switch *ds)
 	int i;
 
 	for (i = 0; i < 10; i++) {
-		ret = REG_READ(REG_GLOBAL2, 0x1d);
+		ret = REG_READ(REG_GLOBAL, 0x1d);
 		if ((ret & 0x8000) == 0)
 			return 0;
 	}
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index 2e1f836d424..f0bbc57926c 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -520,6 +520,7 @@ static int econet_getname(struct socket *sock, struct sockaddr *uaddr,
 	if (peer)
 		return -EOPNOTSUPP;
 
+	memset(sec, 0, sizeof(*sec));
 	mutex_lock(&econet_mutex);
 
 	sk = sock->sk;
diff --git a/net/ieee802154/af_ieee802154.c b/net/ieee802154/af_ieee802154.c
index 3bb6bdb1dac..af661805b9f 100644
--- a/net/ieee802154/af_ieee802154.c
+++ b/net/ieee802154/af_ieee802154.c
@@ -136,7 +136,7 @@ static int ieee802154_dev_ioctl(struct sock *sk, struct ifreq __user *arg,
 		unsigned int cmd)
 {
 	struct ifreq ifr;
-	int ret = -EINVAL;
+	int ret = -ENOIOCTLCMD;
 	struct net_device *dev;
 
 	if (copy_from_user(&ifr, arg, sizeof(struct ifreq)))
@@ -146,8 +146,10 @@ static int ieee802154_dev_ioctl(struct sock *sk, struct ifreq __user *arg,
 
 	dev_load(sock_net(sk), ifr.ifr_name);
 	dev = dev_get_by_name(sock_net(sk), ifr.ifr_name);
-	if (dev->type == ARPHRD_IEEE802154 ||
-	    dev->type == ARPHRD_IEEE802154_PHY)
+
+	if ((dev->type == ARPHRD_IEEE802154 ||
+	     dev->type == ARPHRD_IEEE802154_PHY) &&
+	    dev->netdev_ops->ndo_do_ioctl)
 		ret = dev->netdev_ops->ndo_do_ioctl(dev, &ifr, cmd);
 
 	if (!ret && copy_to_user(arg, &ifr, sizeof(struct ifreq)))
diff --git a/net/ieee802154/dgram.c b/net/ieee802154/dgram.c
index 14d39840dd6..ba8b214dda8 100644
--- a/net/ieee802154/dgram.c
+++ b/net/ieee802154/dgram.c
@@ -377,6 +377,18 @@ int ieee802154_dgram_deliver(struct net_device *dev, struct sk_buff *skb)
 	return ret;
 }
 
+static int dgram_getsockopt(struct sock *sk, int level, int optname,
+		    char __user *optval, int __user *optlen)
+{
+	return -EOPNOTSUPP;
+}
+
+static int dgram_setsockopt(struct sock *sk, int level, int optname,
+		    char __user *optval, int __user optlen)
+{
+	return -EOPNOTSUPP;
+}
+
 struct proto ieee802154_dgram_prot = {
 	.name		= "IEEE-802.15.4-MAC",
 	.owner		= THIS_MODULE,
@@ -391,5 +403,7 @@ struct proto ieee802154_dgram_prot = {
 	.connect	= dgram_connect,
 	.disconnect	= dgram_disconnect,
 	.ioctl		= dgram_ioctl,
+	.getsockopt	= dgram_getsockopt,
+	.setsockopt	= dgram_setsockopt,
 };
 
diff --git a/net/ieee802154/netlink.c b/net/ieee802154/netlink.c
index 105ad10876a..27eda9fdf3c 100644
--- a/net/ieee802154/netlink.c
+++ b/net/ieee802154/netlink.c
@@ -276,6 +276,9 @@ static struct net_device *ieee802154_nl_get_dev(struct genl_info *info)
 	else
 		return NULL;
 
+	if (!dev)
+		return NULL;
+
 	if (dev->type != ARPHRD_IEEE802154) {
 		dev_put(dev);
 		return NULL;
@@ -521,3 +524,6 @@ static void __exit ieee802154_nl_exit(void)
 }
 module_exit(ieee802154_nl_exit);
 
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ieee 802.15.4 configuration interface");
+
diff --git a/net/ieee802154/raw.c b/net/ieee802154/raw.c
index fca44d59f97..9315977c4c6 100644
--- a/net/ieee802154/raw.c
+++ b/net/ieee802154/raw.c
@@ -238,6 +238,18 @@ void ieee802154_raw_deliver(struct net_device *dev, struct sk_buff *skb)
 	read_unlock(&raw_lock);
 }
 
+static int raw_getsockopt(struct sock *sk, int level, int optname,
+		    char __user *optval, int __user *optlen)
+{
+	return -EOPNOTSUPP;
+}
+
+static int raw_setsockopt(struct sock *sk, int level, int optname,
+		    char __user *optval, int __user optlen)
+{
+	return -EOPNOTSUPP;
+}
+
 struct proto ieee802154_raw_prot = {
 	.name		= "IEEE-802.15.4-RAW",
 	.owner		= THIS_MODULE,
@@ -250,5 +262,7 @@ struct proto ieee802154_raw_prot = {
 	.unhash		= raw_unhash,
 	.connect	= raw_connect,
 	.disconnect	= raw_disconnect,
+	.getsockopt	= raw_getsockopt,
+	.setsockopt	= raw_setsockopt,
 };
 
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 8a3881e28ac..090e9991ac2 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -801,11 +801,8 @@ static int arp_process(struct sk_buff *skb)
  *  cache.
  */
 
-	/*
-	 *  Special case: IPv4 duplicate address detection packet (RFC2131)
-	 *  and Gratuitous ARP/ARP Announce. (RFC3927, Section 2.4)
-	 */
-	if (sip == 0 || tip == sip) {
+	/* Special case: IPv4 duplicate address detection packet (RFC2131) */
+	if (sip == 0) {
 		if (arp->ar_op == htons(ARPOP_REQUEST) &&
 		    inet_addr_type(net, tip) == RTN_LOCAL &&
 		    !arp_ignore(in_dev, sip, tip))
@@ -1307,7 +1304,9 @@ static void arp_format_neigh_entry(struct seq_file *seq,
 		hbuffer[k++] = hex_asc_lo(n->ha[j]);
 		hbuffer[k++] = ':';
 	}
-	hbuffer[--k] = 0;
+	if (k != 0)
+		--k;
+	hbuffer[k] = 0;
 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
 	}
 #endif
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 012cf5a6858..63c2fa7b68c 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -316,8 +316,8 @@ static inline void check_tnode(const struct tnode *tn)
 
 static const int halve_threshold = 25;
 static const int inflate_threshold = 50;
-static const int halve_threshold_root = 8;
-static const int inflate_threshold_root = 15;
+static const int halve_threshold_root = 15;
+static const int inflate_threshold_root = 25;
 
 
 static void __alias_free_mem(struct rcu_head *head)
@@ -1021,6 +1021,9 @@ static void trie_rebalance(struct trie *t, struct tnode *tn)
 				      (struct node *)tn, wasfull);
 
 		tp = node_parent((struct node *) tn);
+		if (!tp)
+			rcu_assign_pointer(t->trie, (struct node *)tn);
+
 		tnode_free_flush();
 		if (!tp)
 			break;
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 44e2a3d2359..82c11dd10a6 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -735,10 +735,10 @@ static int ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	tos = tiph->tos;
-	if (tos&1) {
+	if (tos == 1) {
+		tos = 0;
 		if (skb->protocol == htons(ETH_P_IP))
 			tos = old_iph->tos;
-		tos &= ~1;
 	}
 
 	{
@@ -951,7 +951,7 @@ static int ipgre_tunnel_bind_dev(struct net_device *dev)
 			addend += 4;
 	}
 	dev->needed_headroom = addend + hlen;
-	mtu -= dev->hard_header_len - addend;
+	mtu -= dev->hard_header_len + addend;
 
 	if (mtu < 68)
 		mtu = 68;
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index 490ce20faf3..db46b4b5b2b 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -440,6 +440,9 @@ int ip_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt,
 	/* Remove any debris in the socket control block */
 	memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
 
+	/* Must drop socket now because of tproxy. */
+	skb_orphan(skb);
+
 	return NF_HOOK(PF_INET, NF_INET_PRE_ROUTING, skb, dev, NULL,
 		       ip_rcv_finish);
 
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 24702628266..7ffcd96fe59 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -813,6 +813,8 @@ int ip_append_data(struct sock *sk,
 			inet->cork.addr = ipc->addr;
 		}
 		rt = *rtp;
+		if (unlikely(!rt))
+			return -EFAULT;
 		/*
 		 * We steal reference to this route, caller should not release it
 		 */
@@ -1243,7 +1245,6 @@ int ip_push_pending_frames(struct sock *sk)
 		skb->len += tmp_skb->len;
 		skb->data_len += tmp_skb->len;
 		skb->truesize += tmp_skb->truesize;
-		__sock_put(tmp_skb->sk);
 		tmp_skb->destructor = NULL;
 		tmp_skb->sk = NULL;
 	}
diff --git a/net/ipv4/netfilter/nf_nat_helper.c b/net/ipv4/netfilter/nf_nat_helper.c
index 155c008626c..09172a65d9b 100644
--- a/net/ipv4/netfilter/nf_nat_helper.c
+++ b/net/ipv4/netfilter/nf_nat_helper.c
@@ -191,7 +191,8 @@ nf_nat_mangle_tcp_packet(struct sk_buff *skb,
 				    ct, ctinfo);
 		/* Tell TCP window tracking about seq change */
 		nf_conntrack_tcp_update(skb, ip_hdrlen(skb),
-					ct, CTINFO2DIR(ctinfo));
+					ct, CTINFO2DIR(ctinfo),
+					(int)rep_len - (int)match_len);
 
 		nf_conntrack_event_cache(IPCT_NATSEQADJ, ct);
 	}
@@ -377,6 +378,7 @@ nf_nat_seq_adjust(struct sk_buff *skb,
 	struct tcphdr *tcph;
 	int dir;
 	__be32 newseq, newack;
+	s16 seqoff, ackoff;
 	struct nf_conn_nat *nat = nfct_nat(ct);
 	struct nf_nat_seq *this_way, *other_way;
 
@@ -390,15 +392,18 @@ nf_nat_seq_adjust(struct sk_buff *skb,
 
 	tcph = (void *)skb->data + ip_hdrlen(skb);
 	if (after(ntohl(tcph->seq), this_way->correction_pos))
-		newseq = htonl(ntohl(tcph->seq) + this_way->offset_after);
+		seqoff = this_way->offset_after;
 	else
-		newseq = htonl(ntohl(tcph->seq) + this_way->offset_before);
+		seqoff = this_way->offset_before;
 
 	if (after(ntohl(tcph->ack_seq) - other_way->offset_before,
 		  other_way->correction_pos))
-		newack = htonl(ntohl(tcph->ack_seq) - other_way->offset_after);
+		ackoff = other_way->offset_after;
 	else
-		newack = htonl(ntohl(tcph->ack_seq) - other_way->offset_before);
+		ackoff = other_way->offset_before;
+
+	newseq = htonl(ntohl(tcph->seq) + seqoff);
+	newack = htonl(ntohl(tcph->ack_seq) - ackoff);
 
 	inet_proto_csum_replace4(&tcph->check, skb, tcph->seq, newseq, 0);
 	inet_proto_csum_replace4(&tcph->check, skb, tcph->ack_seq, newack, 0);
@@ -413,7 +418,7 @@ nf_nat_seq_adjust(struct sk_buff *skb,
 	if (!nf_nat_sack_adjust(skb, tcph, ct, ctinfo))
 		return 0;
 
-	nf_conntrack_tcp_update(skb, ip_hdrlen(skb), ct, dir);
+	nf_conntrack_tcp_update(skb, ip_hdrlen(skb), ct, dir, seqoff);
 
 	return 1;
 }
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 17b89c523f9..91145244ea6 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -339,7 +339,7 @@ unsigned int tcp_poll(struct file *file, struct socket *sock, poll_table *wait)
 	struct sock *sk = sock->sk;
 	struct tcp_sock *tp = tcp_sk(sk);
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 	if (sk->sk_state == TCP_LISTEN)
 		return inet_csk_listen_poll(sk);
 
@@ -903,13 +903,17 @@ int tcp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
 		iov++;
 
 		while (seglen > 0) {
-			int copy;
+			int copy = 0;
+			int max = size_goal;
 
 			skb = tcp_write_queue_tail(sk);
+			if (tcp_send_head(sk)) {
+				if (skb->ip_summed == CHECKSUM_NONE)
+					max = mss_now;
+				copy = max - skb->len;
+			}
 
-			if (!tcp_send_head(sk) ||
-			    (copy = size_goal - skb->len) <= 0) {
-
+			if (copy <= 0) {
 new_segment:
 				/* Allocate new segment. If the interface is SG,
 				 * allocate skb fitting to single page.
@@ -930,6 +934,7 @@ new_segment:
 
 				skb_entail(sk, skb);
 				copy = size_goal;
+				max = size_goal;
 			}
 
 			/* Try to append data to the end of skb. */
@@ -1028,7 +1033,7 @@ new_segment:
 			if ((seglen -= copy) == 0 && iovlen == 0)
 				goto out;
 
-			if (skb->len < size_goal || (flags & MSG_OOB))
+			if (skb->len < max || (flags & MSG_OOB))
 				continue;
 
 			if (forced_push(tp)) {
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 5a1ca2698c8..6d88219c5e2 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1160,6 +1160,7 @@ struct request_sock_ops tcp_request_sock_ops __read_mostly = {
 #ifdef CONFIG_TCP_MD5SIG
 static struct tcp_request_sock_ops tcp_request_sock_ipv4_ops = {
 	.md5_lookup	=	tcp_v4_reqsk_md5_lookup,
+	.calc_md5_hash	=	tcp_v4_md5_hash_skb,
 };
 #endif
 
@@ -1373,7 +1374,7 @@ struct sock *tcp_v4_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
 		 */
 		char *newkey = kmemdup(key->key, key->keylen, GFP_ATOMIC);
 		if (newkey != NULL)
-			tcp_v4_md5_do_add(newsk, inet_sk(sk)->daddr,
+			tcp_v4_md5_do_add(newsk, newinet->daddr,
 					  newkey, key->keylen);
 		newsk->sk_route_caps &= ~NETIF_F_GSO_MASK;
 	}
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 43bbba7926e..f8d67ccc64f 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -128,7 +128,8 @@ tcp_timewait_state_process(struct inet_timewait_sock *tw, struct sk_buff *skb,
 			goto kill_with_rst;
 
 		/* Dup ACK? */
-		if (!after(TCP_SKB_CB(skb)->end_seq, tcptw->tw_rcv_nxt) ||
+		if (!th->ack ||
+		    !after(TCP_SKB_CB(skb)->end_seq, tcptw->tw_rcv_nxt) ||
 		    TCP_SKB_CB(skb)->end_seq == TCP_SKB_CB(skb)->seq) {
 			inet_twsk_put(tw);
 			return TCP_TW_SUCCESS;
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 416fc4c2e7e..bd62712848f 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -725,7 +725,8 @@ static void tcp_queue_skb(struct sock *sk, struct sk_buff *skb)
 static void tcp_set_skb_tso_segs(struct sock *sk, struct sk_buff *skb,
 				 unsigned int mss_now)
 {
-	if (skb->len <= mss_now || !sk_can_gso(sk)) {
+	if (skb->len <= mss_now || !sk_can_gso(sk) ||
+	    skb->ip_summed == CHECKSUM_NONE) {
 		/* Avoid the costly divide in the normal
 		 * non-TSO case.
 		 */
@@ -2260,7 +2261,7 @@ struct sk_buff *tcp_make_synack(struct sock *sk, struct dst_entry *dst,
 #ifdef CONFIG_TCP_MD5SIG
 	/* Okay, we have all we need - do the md5 hash if needed */
 	if (md5) {
-		tp->af_specific->calc_md5_hash(md5_hash_location,
+		tcp_rsk(req)->af_specific->calc_md5_hash(md5_hash_location,
 					       md5, NULL, req, skb);
 	}
 #endif
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 60d918c96a4..0071ee6f441 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -136,7 +136,8 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
 		case IPPROTO_TCP:
 		case IPPROTO_SCTP:
 		case IPPROTO_DCCP:
-			if (pskb_may_pull(skb, xprth + 4 - skb->data)) {
+			if (xprth + 4 < skb->data ||
+			    pskb_may_pull(skb, xprth + 4 - skb->data)) {
 				__be16 *ports = (__be16 *)xprth;
 
 				fl->fl_ip_sport = ports[!!reverse];
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 8c1e86afbbf..43b3c9f89c1 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1916,8 +1916,32 @@ ok:
 					update_lft = 1;
 				else if (stored_lft <= MIN_VALID_LIFETIME) {
 					/* valid_lft <= stored_lft is always true */
-					/* XXX: IPsec */
-					update_lft = 0;
+					/*
+					 * RFC 4862 Section 5.5.3e:
+					 * "Note that the preferred lifetime of
+					 *  the corresponding address is always
+					 *  reset to the Preferred Lifetime in
+					 *  the received Prefix Information
+					 *  option, regardless of whether the
+					 *  valid lifetime is also reset or
+					 *  ignored."
+					 *
+					 *  So if the preferred lifetime in
+					 *  this advertisement is different
+					 *  than what we have stored, but the
+					 *  valid lifetime is invalid, just
+					 *  reset prefered_lft.
+					 *
+					 *  We must set the valid lifetime
+					 *  to the stored lifetime since we'll
+					 *  be updating the timestamp below,
+					 *  else we'll set it back to the
+					 *  minumum.
+					 */
+					if (prefered_lft != ifp->prefered_lft) {
+						valid_lft = stored_lft;
+						update_lft = 1;
+					}
 				} else {
 					valid_lft = MIN_VALID_LIFETIME;
 					if (valid_lft < prefered_lft)
@@ -3085,7 +3109,7 @@ restart:
 				spin_unlock(&ifp->lock);
 				continue;
 			} else if (age >= ifp->prefered_lft) {
-				/* jiffies - ifp->tsamp > age >= ifp->prefered_lft */
+				/* jiffies - ifp->tstamp > age >= ifp->prefered_lft */
 				int deprecate = 0;
 
 				if (!(ifp->flags&IFA_F_DEPRECATED)) {
@@ -3362,7 +3386,10 @@ static int inet6_fill_ifaddr(struct sk_buff *skb, struct inet6_ifaddr *ifa,
 		valid = ifa->valid_lft;
 		if (preferred != INFINITY_LIFE_TIME) {
 			long tval = (jiffies - ifa->tstamp)/HZ;
-			preferred -= tval;
+			if (preferred > tval)
+				preferred -= tval;
+			else
+				preferred = 0;
 			if (valid != INFINITY_LIFE_TIME)
 				valid -= tval;
 		}
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 85b3d0036af..45f9a2a42d5 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -306,8 +306,10 @@ int inet6_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
 		    v4addr != htonl(INADDR_ANY) &&
 		    chk_addr_ret != RTN_LOCAL &&
 		    chk_addr_ret != RTN_MULTICAST &&
-		    chk_addr_ret != RTN_BROADCAST)
+		    chk_addr_ret != RTN_BROADCAST) {
+			err = -EADDRNOTAVAIL;
 			goto out;
+		}
 	} else {
 		if (addr_type != IPV6_ADDR_ANY) {
 			struct net_device *dev = NULL;
@@ -1284,6 +1286,8 @@ static void __exit inet6_exit(void)
 	proto_unregister(&udplitev6_prot);
 	proto_unregister(&udpv6_prot);
 	proto_unregister(&tcpv6_prot);
+
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 module_exit(inet6_exit);
 
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index c3a07d75b5f..6d6a4277c67 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -139,6 +139,9 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt
 
 	rcu_read_unlock();
 
+	/* Must drop socket now because of tproxy. */
+	skb_orphan(skb);
+
 	return NF_HOOK(PF_INET6, NF_INET_PRE_ROUTING, skb, dev, NULL,
 		       ip6_rcv_finish);
 err:
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 7c76e3d1821..87f8419a68f 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1484,7 +1484,6 @@ int ip6_push_pending_frames(struct sock *sk)
 		skb->len += tmp_skb->len;
 		skb->data_len += tmp_skb->len;
 		skb->truesize += tmp_skb->truesize;
-		__sock_put(tmp_skb->sk);
 		tmp_skb->destructor = NULL;
 		tmp_skb->sk = NULL;
 	}
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 68e52308e55..98b7327d094 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1018,6 +1018,7 @@ static void ipip6_tunnel_setup(struct net_device *dev)
 	dev->hard_header_len 	= LL_MAX_HEADER + sizeof(struct iphdr);
 	dev->mtu		= ETH_DATA_LEN - sizeof(struct iphdr);
 	dev->flags		= IFF_NOARP;
+	dev->priv_flags	       &= ~IFF_XMIT_DST_RELEASE;
 	dev->iflink		= 0;
 	dev->addr_len		= 4;
 	dev->features		|= NETIF_F_NETNS_LOCAL;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 58810c65b63..d849dd53b78 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -896,6 +896,7 @@ struct request_sock_ops tcp6_request_sock_ops __read_mostly = {
 #ifdef CONFIG_TCP_MD5SIG
 static struct tcp_request_sock_ops tcp_request_sock_ipv6_ops = {
 	.md5_lookup	=	tcp_v6_reqsk_md5_lookup,
+	.calc_md5_hash	=	tcp_v6_md5_hash_skb,
 };
 #endif
 
@@ -1441,7 +1442,7 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
 		 */
 		char *newkey = kmemdup(key->key, key->keylen, GFP_ATOMIC);
 		if (newkey != NULL)
-			tcp_v6_md5_do_add(newsk, &inet6_sk(sk)->daddr,
+			tcp_v6_md5_do_add(newsk, &newnp->daddr,
 					  newkey, key->keylen);
 	}
 #endif
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index b4b16a43f27..3a3c677bc0f 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -157,7 +157,8 @@ _decode_session6(struct sk_buff *skb, struct flowi *fl, int reverse)
 	ipv6_addr_copy(&fl->fl6_dst, reverse ? &hdr->saddr : &hdr->daddr);
 	ipv6_addr_copy(&fl->fl6_src, reverse ? &hdr->daddr : &hdr->saddr);
 
-	while (pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
+	while (nh + offset + 1 < skb->data ||
+	       pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
 		nh = skb_network_header(skb);
 		exthdr = (struct ipv6_opt_hdr *)(nh + offset);
 
@@ -177,7 +178,8 @@ _decode_session6(struct sk_buff *skb, struct flowi *fl, int reverse)
 		case IPPROTO_TCP:
 		case IPPROTO_SCTP:
 		case IPPROTO_DCCP:
-			if (!onlyproto && pskb_may_pull(skb, nh + offset + 4 - skb->data)) {
+			if (!onlyproto && (nh + offset + 4 < skb->data ||
+			     pskb_may_pull(skb, nh + offset + 4 - skb->data))) {
 				__be16 *ports = (__be16 *)exthdr;
 
 				fl->fl_ip_sport = ports[!!reverse];
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index 417b0e30949..f1118d92a19 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -41,6 +41,7 @@
 #include <linux/netdevice.h>
 #include <linux/uio.h>
 #include <linux/skbuff.h>
+#include <linux/smp_lock.h>
 #include <linux/socket.h>
 #include <linux/sockios.h>
 #include <linux/string.h>
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index cb762c8723e..50b43c57d5d 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -45,6 +45,7 @@
 #include <linux/capability.h>
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/smp_lock.h>
 #include <linux/socket.h>
 #include <linux/sockios.h>
 #include <linux/init.h>
@@ -714,6 +715,7 @@ static int irda_getname(struct socket *sock, struct sockaddr *uaddr,
 	struct sock *sk = sock->sk;
 	struct irda_sock *self = irda_sk(sk);
 
+	memset(&saddr, 0, sizeof(saddr));
 	if (peer) {
 		if (sk->sk_state != TCP_ESTABLISHED)
 			return -ENOTCONN;
diff --git a/net/irda/irnet/irnet.h b/net/irda/irnet/irnet.h
index bccf4d0059f..b001c361ad3 100644
--- a/net/irda/irnet/irnet.h
+++ b/net/irda/irnet/irnet.h
@@ -241,7 +241,6 @@
 #include <linux/module.h>
 
 #include <linux/kernel.h>
-#include <linux/smp_lock.h>
 #include <linux/skbuff.h>
 #include <linux/tty.h>
 #include <linux/proc_fs.h>
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
index 6d8ae03c14f..68cbcb19cbd 100644
--- a/net/irda/irnet/irnet_ppp.c
+++ b/net/irda/irnet/irnet_ppp.c
@@ -13,6 +13,7 @@
  *	2) as a control channel (write commands, read events)
  */
 
+#include <linux/smp_lock.h>
 #include "irnet_ppp.h"		/* Private header */
 /* Please put other headers in irnet.h - Thanks */
 
diff --git a/net/irda/irttp.c b/net/irda/irttp.c
index ecf4eb2717c..9cb79f95bf6 100644
--- a/net/irda/irttp.c
+++ b/net/irda/irttp.c
@@ -1453,6 +1453,7 @@ struct tsap_cb *irttp_dup(struct tsap_cb *orig, void *instance)
 	}
 	/* Dup */
 	memcpy(new, orig, sizeof(struct tsap_cb));
+	spin_lock_init(&new->lock);
 
 	/* We don't need the old instance any more */
 	spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags);
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 6be5f92d109..49c15b48408 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -306,7 +306,7 @@ static inline int iucv_below_msglim(struct sock *sk)
 static void iucv_sock_wake_msglim(struct sock *sk)
 {
 	read_lock(&sk->sk_callback_lock);
-	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+	if (sk_has_sleeper(sk))
 		wake_up_interruptible_all(sk->sk_sleep);
 	sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
 	read_unlock(&sk->sk_callback_lock);
@@ -1256,7 +1256,7 @@ unsigned int iucv_sock_poll(struct file *file, struct socket *sock,
 	struct sock *sk = sock->sk;
 	unsigned int mask = 0;
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 
 	if (sk->sk_state == IUCV_LISTEN)
 		return iucv_accept_poll(sk);
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index 9208cf5f2bd..c45eee1c0e8 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -914,6 +914,7 @@ static int llc_ui_getname(struct socket *sock, struct sockaddr *uaddr,
 	struct llc_sock *llc = llc_sk(sk);
 	int rc = 0;
 
+	memset(&sllc, 0, sizeof(sllc));
 	lock_sock(sk);
 	if (sock_flag(sk, SOCK_ZAPPED))
 		goto out;
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index ba2643a43c7..7836ee92898 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -83,6 +83,7 @@ endmenu
 config MAC80211_MESH
 	bool "Enable mac80211 mesh networking (pre-802.11s) support"
 	depends on MAC80211 && EXPERIMENTAL
+	depends on BROKEN
 	---help---
 	 This options enables support of Draft 802.11s mesh networking.
 	 The implementation is based on Draft 1.08 of the Mesh Networking
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 9e5762ad307..a24e59816b9 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -381,6 +381,14 @@ static void ieee80211_agg_splice_packets(struct ieee80211_local *local,
 		&local->hw, queue,
 		IEEE80211_QUEUE_STOP_REASON_AGGREGATION);
 
+	if (!(sta->ampdu_mlme.tid_state_tx[tid] & HT_ADDBA_REQUESTED_MSK))
+		return;
+
+	if (WARN(!sta->ampdu_mlme.tid_tx[tid],
+		 "TID %d gone but expected when splicing aggregates from"
+		 "the pending queue\n", tid))
+		return;
+
 	if (!skb_queue_empty(&sta->ampdu_mlme.tid_tx[tid]->pending)) {
 		spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
 		/* mark queue as pending, it is stopped already */
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index ce267565e18..659a42d529e 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -67,6 +67,8 @@ static DECLARE_WORK(todo_work, key_todo);
  *
  * @key: key to add to do item for
  * @flag: todo flag(s)
+ *
+ * Must be called with IRQs or softirqs disabled.
  */
 static void add_todo(struct ieee80211_key *key, u32 flag)
 {
@@ -140,9 +142,9 @@ static void ieee80211_key_enable_hw_accel(struct ieee80211_key *key)
 	ret = drv_set_key(key->local, SET_KEY, &sdata->vif, sta, &key->conf);
 
 	if (!ret) {
-		spin_lock(&todo_lock);
+		spin_lock_bh(&todo_lock);
 		key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
-		spin_unlock(&todo_lock);
+		spin_unlock_bh(&todo_lock);
 	}
 
 	if (ret && ret != -ENOSPC && ret != -EOPNOTSUPP)
@@ -164,12 +166,12 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key)
 	if (!key || !key->local->ops->set_key)
 		return;
 
-	spin_lock(&todo_lock);
+	spin_lock_bh(&todo_lock);
 	if (!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) {
-		spin_unlock(&todo_lock);
+		spin_unlock_bh(&todo_lock);
 		return;
 	}
-	spin_unlock(&todo_lock);
+	spin_unlock_bh(&todo_lock);
 
 	sta = get_sta_for_key(key);
 	sdata = key->sdata;
@@ -188,9 +190,9 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key)
 		       wiphy_name(key->local->hw.wiphy),
 		       key->conf.keyidx, sta ? sta->addr : bcast_addr, ret);
 
-	spin_lock(&todo_lock);
+	spin_lock_bh(&todo_lock);
 	key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
-	spin_unlock(&todo_lock);
+	spin_unlock_bh(&todo_lock);
 }
 
 static void __ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata,
@@ -437,14 +439,14 @@ void ieee80211_key_link(struct ieee80211_key *key,
 
 	__ieee80211_key_replace(sdata, sta, old_key, key);
 
-	spin_unlock_irqrestore(&sdata->local->key_lock, flags);
-
 	/* free old key later */
 	add_todo(old_key, KEY_FLAG_TODO_DELETE);
 
 	add_todo(key, KEY_FLAG_TODO_ADD_DEBUGFS);
 	if (netif_running(sdata->dev))
 		add_todo(key, KEY_FLAG_TODO_HWACCEL_ADD);
+
+	spin_unlock_irqrestore(&sdata->local->key_lock, flags);
 }
 
 static void __ieee80211_key_free(struct ieee80211_key *key)
@@ -547,7 +549,7 @@ static void __ieee80211_key_todo(void)
 	 */
 	synchronize_rcu();
 
-	spin_lock(&todo_lock);
+	spin_lock_bh(&todo_lock);
 	while (!list_empty(&todo_list)) {
 		key = list_first_entry(&todo_list, struct ieee80211_key, todo);
 		list_del_init(&key->todo);
@@ -558,7 +560,7 @@ static void __ieee80211_key_todo(void)
 					  KEY_FLAG_TODO_HWACCEL_REMOVE |
 					  KEY_FLAG_TODO_DELETE);
 		key->flags &= ~todoflags;
-		spin_unlock(&todo_lock);
+		spin_unlock_bh(&todo_lock);
 
 		work_done = false;
 
@@ -591,9 +593,9 @@ static void __ieee80211_key_todo(void)
 
 		WARN_ON(!work_done);
 
-		spin_lock(&todo_lock);
+		spin_lock_bh(&todo_lock);
 	}
-	spin_unlock(&todo_lock);
+	spin_unlock_bh(&todo_lock);
 }
 
 void ieee80211_key_todo(void)
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index fc712e60705..11cf45bce38 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -494,7 +494,7 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 	 * should it be using the interface and enqueuing
 	 * frames at this very time on another CPU.
 	 */
-	synchronize_rcu();
+	rcu_barrier(); /* Wait for RX path and call_rcu()'s */
 	skb_queue_purge(&sdata->u.mesh.skb_queue);
 }
 
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 003cb470ac8..f49ef288e2e 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -637,7 +637,7 @@ static void mesh_queue_preq(struct mesh_path *mpath, u8 flags)
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct mesh_preq_queue *preq_node;
 
-	preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_KERNEL);
+	preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_ATOMIC);
 	if (!preq_node) {
 		printk(KERN_DEBUG "Mesh HWMP: could not allocate PREQ node\n");
 		return;
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 3c72557df45..479597e8858 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -175,6 +175,8 @@ int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata)
 	int err = 0;
 	u32 hash_idx;
 
+	might_sleep();
+
 	if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0)
 		/* never add ourselves as neighbours */
 		return -ENOTSUPP;
@@ -265,6 +267,7 @@ int mpp_path_add(u8 *dst, u8 *mpp, struct ieee80211_sub_if_data *sdata)
 	int err = 0;
 	u32 hash_idx;
 
+	might_sleep();
 
 	if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0)
 		/* never add ourselves as neighbours */
@@ -491,8 +494,10 @@ void mesh_path_tx_pending(struct mesh_path *mpath)
  * @skb: frame to discard
  * @sdata: network subif the frame was to be sent through
  *
- * If the frame was beign forwarded from another MP, a PERR frame will be sent
- * to the precursor.
+ * If the frame was being forwarded from another MP, a PERR frame will be sent
+ * to the precursor.  The precursor's address (i.e. the previous hop) was saved
+ * in addr1 of the frame-to-be-forwarded, and would only be overwritten once
+ * the destination is successfully resolved.
  *
  * Locking: the function must me called within a rcu_read_lock region
  */
@@ -507,7 +512,7 @@ void mesh_path_discard_frame(struct sk_buff *skb,
 		u8 *ra, *da;
 
 		da = hdr->addr3;
-		ra = hdr->addr2;
+		ra = hdr->addr1;
 		mpath = mesh_path_lookup(da, sdata);
 		if (mpath)
 			dsn = ++mpath->dsn;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index aca22b00b6a..07e7e41816b 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -721,7 +721,7 @@ void ieee80211_dynamic_ps_timer(unsigned long data)
 {
 	struct ieee80211_local *local = (void *) data;
 
-	if (local->quiescing)
+	if (local->quiescing || local->suspended)
 		return;
 
 	queue_work(local->hw.workqueue, &local->dynamic_ps_enable_work);
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 7a549f9deb9..5e3d476972f 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -55,15 +55,6 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
 
 	rcu_read_unlock();
 
-	/* flush again, in case driver queued work */
-	flush_workqueue(local->hw.workqueue);
-
-	/* stop hardware - this must stop RX */
-	if (local->open_count) {
-		ieee80211_led_radio(local, false);
-		drv_stop(local);
-	}
-
 	/* remove STAs */
 	spin_lock_irqsave(&local->sta_lock, flags);
 	list_for_each_entry(sta, &local->sta_list, list) {
@@ -111,7 +102,22 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
 		drv_remove_interface(local, &conf);
 	}
 
+	/* stop hardware - this must stop RX */
+	if (local->open_count) {
+		ieee80211_led_radio(local, false);
+		drv_stop(local);
+	}
+
+	/*
+	 * flush again, in case driver queued work -- it
+	 * shouldn't be doing (or cancel everything in the
+	 * stop callback) that but better safe than sorry.
+	 */
+	flush_workqueue(local->hw.workqueue);
+
 	local->suspended = true;
+	/* need suspended to be visible before quiescing is false */
+	barrier();
 	local->quiescing = false;
 
 	return 0;
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index b218b98fba7..37771abd8f5 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -66,7 +66,7 @@ rix_to_ndx(struct minstrel_sta_info *mi, int rix)
 	for (i = rix; i >= 0; i--)
 		if (mi->r[i].rix == rix)
 			break;
-	WARN_ON(mi->r[i].rix != rix);
+	WARN_ON(i < 0);
 	return i;
 }
 
@@ -181,6 +181,9 @@ minstrel_tx_status(void *priv, struct ieee80211_supported_band *sband,
 			break;
 
 		ndx = rix_to_ndx(mi, ar[i].idx);
+		if (ndx < 0)
+			continue;
+
 		mi->r[ndx].attempts += ar[i].count;
 
 		if ((i != IEEE80211_TX_MAX_RATES - 1) && (ar[i + 1].idx < 0))
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index de5bba7f910..0936fc24942 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2453,6 +2453,18 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
 		return;
 	}
 
+	/*
+	 * If we're suspending, it is possible although not too likely
+	 * that we'd be receiving frames after having already partially
+	 * quiesced the stack. We can't process such frames then since
+	 * that might, for example, cause stations to be added or other
+	 * driver callbacks be invoked.
+	 */
+	if (unlikely(local->quiescing || local->suspended)) {
+		kfree_skb(skb);
+		return;
+	}
+
 	if (status->flag & RX_FLAG_HT) {
 		/* rate_idx is MCS index */
 		if (WARN_ON(status->rate_idx < 0 ||
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index d238a8939a0..3a8922cd103 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1455,7 +1455,7 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		monitor_iface = UNKNOWN_ADDRESS;
 
 		len_rthdr = ieee80211_get_radiotap_len(skb->data);
-		hdr = (struct ieee80211_hdr *)skb->data + len_rthdr;
+		hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr);
 		hdrlen = ieee80211_hdrlen(hdr->frame_control);
 
 		/* check the header is complete in the frame */
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 7508f11c5b3..b5869b9574b 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -561,23 +561,38 @@ struct nf_conn *nf_conntrack_alloc(struct net *net,
 		}
 	}
 
-	ct = kmem_cache_zalloc(nf_conntrack_cachep, gfp);
+	/*
+	 * Do not use kmem_cache_zalloc(), as this cache uses
+	 * SLAB_DESTROY_BY_RCU.
+	 */
+	ct = kmem_cache_alloc(nf_conntrack_cachep, gfp);
 	if (ct == NULL) {
 		pr_debug("nf_conntrack_alloc: Can't alloc conntrack.\n");
 		atomic_dec(&net->ct.count);
 		return ERR_PTR(-ENOMEM);
 	}
-
+	/*
+	 * Let ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode.next
+	 * and ct->tuplehash[IP_CT_DIR_REPLY].hnnode.next unchanged.
+	 */
+	memset(&ct->tuplehash[IP_CT_DIR_MAX], 0,
+	       sizeof(*ct) - offsetof(struct nf_conn, tuplehash[IP_CT_DIR_MAX]));
 	spin_lock_init(&ct->lock);
-	atomic_set(&ct->ct_general.use, 1);
 	ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple = *orig;
+	ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode.pprev = NULL;
 	ct->tuplehash[IP_CT_DIR_REPLY].tuple = *repl;
+	ct->tuplehash[IP_CT_DIR_REPLY].hnnode.pprev = NULL;
 	/* Don't set timer yet: wait for confirmation */
 	setup_timer(&ct->timeout, death_by_timeout, (unsigned long)ct);
 #ifdef CONFIG_NET_NS
 	ct->ct_net = net;
 #endif
 
+	/*
+	 * changes to lookup keys must be done before setting refcnt to 1
+	 */
+	smp_wmb();
+	atomic_set(&ct->ct_general.use, 1);
 	return ct;
 }
 EXPORT_SYMBOL_GPL(nf_conntrack_alloc);
diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
index afde8f99164..2032dfe25ca 100644
--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -617,8 +617,10 @@ err1:
 void nf_conntrack_expect_fini(struct net *net)
 {
 	exp_proc_remove(net);
-	if (net_eq(net, &init_net))
+	if (net_eq(net, &init_net)) {
+		rcu_barrier(); /* Wait for call_rcu() before destroy */
 		kmem_cache_destroy(nf_ct_expect_cachep);
+	}
 	nf_ct_free_hashtable(net->ct.expect_hash, net->ct.expect_vmalloc,
 			     nf_ct_expect_hsize);
 }
diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c
index 4b2c769d555..fef95be334b 100644
--- a/net/netfilter/nf_conntrack_extend.c
+++ b/net/netfilter/nf_conntrack_extend.c
@@ -186,6 +186,6 @@ void nf_ct_extend_unregister(struct nf_ct_ext_type *type)
 	rcu_assign_pointer(nf_ct_ext_types[type->id], NULL);
 	update_alloc_size(type);
 	mutex_unlock(&nf_ct_ext_type_mutex);
-	synchronize_rcu();
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 EXPORT_SYMBOL_GPL(nf_ct_extend_unregister);
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 33fc0a443f3..97a82ba7537 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -720,8 +720,8 @@ static bool tcp_in_window(const struct nf_conn *ct,
 /* Caller must linearize skb at tcp header. */
 void nf_conntrack_tcp_update(const struct sk_buff *skb,
 			     unsigned int dataoff,
-			     struct nf_conn *ct,
-			     int dir)
+			     struct nf_conn *ct, int dir,
+			     s16 offset)
 {
 	const struct tcphdr *tcph = (const void *)skb->data + dataoff;
 	const struct ip_ct_tcp_state *sender = &ct->proto.tcp.seen[dir];
@@ -734,7 +734,7 @@ void nf_conntrack_tcp_update(const struct sk_buff *skb,
 	/*
 	 * We have to worry for the ack in the reply packet only...
 	 */
-	if (after(end, ct->proto.tcp.seen[dir].td_end))
+	if (ct->proto.tcp.seen[dir].td_end + offset == end)
 		ct->proto.tcp.seen[dir].td_end = end;
 	ct->proto.tcp.last_end = end;
 	spin_unlock_bh(&ct->lock);
diff --git a/net/netfilter/xt_RATEEST.c b/net/netfilter/xt_RATEEST.c
index 43f5676b1af..d80b8192e0d 100644
--- a/net/netfilter/xt_RATEEST.c
+++ b/net/netfilter/xt_RATEEST.c
@@ -74,7 +74,7 @@ static unsigned int
 xt_rateest_tg(struct sk_buff *skb, const struct xt_target_param *par)
 {
 	const struct xt_rateest_target_info *info = par->targinfo;
-	struct gnet_stats_basic *stats = &info->est->bstats;
+	struct gnet_stats_basic_packed *stats = &info->est->bstats;
 
 	spin_lock_bh(&info->est->lock);
 	stats->bytes += skb->len;
diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c
index 0b7139f3dd7..fc581800698 100644
--- a/net/netfilter/xt_conntrack.c
+++ b/net/netfilter/xt_conntrack.c
@@ -129,7 +129,7 @@ conntrack_addrcmp(const union nf_inet_addr *kaddr,
 
 static inline bool
 conntrack_mt_origsrc(const struct nf_conn *ct,
-                     const struct xt_conntrack_mtinfo1 *info,
+                     const struct xt_conntrack_mtinfo2 *info,
 		     u_int8_t family)
 {
 	return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3,
@@ -138,7 +138,7 @@ conntrack_mt_origsrc(const struct nf_conn *ct,
 
 static inline bool
 conntrack_mt_origdst(const struct nf_conn *ct,
-                     const struct xt_conntrack_mtinfo1 *info,
+                     const struct xt_conntrack_mtinfo2 *info,
 		     u_int8_t family)
 {
 	return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3,
@@ -147,7 +147,7 @@ conntrack_mt_origdst(const struct nf_conn *ct,
 
 static inline bool
 conntrack_mt_replsrc(const struct nf_conn *ct,
-                     const struct xt_conntrack_mtinfo1 *info,
+                     const struct xt_conntrack_mtinfo2 *info,
 		     u_int8_t family)
 {
 	return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3,
@@ -156,7 +156,7 @@ conntrack_mt_replsrc(const struct nf_conn *ct,
 
 static inline bool
 conntrack_mt_repldst(const struct nf_conn *ct,
-                     const struct xt_conntrack_mtinfo1 *info,
+                     const struct xt_conntrack_mtinfo2 *info,
 		     u_int8_t family)
 {
 	return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3,
@@ -164,7 +164,7 @@ conntrack_mt_repldst(const struct nf_conn *ct,
 }
 
 static inline bool
-ct_proto_port_check(const struct xt_conntrack_mtinfo1 *info,
+ct_proto_port_check(const struct xt_conntrack_mtinfo2 *info,
                     const struct nf_conn *ct)
 {
 	const struct nf_conntrack_tuple *tuple;
@@ -204,7 +204,7 @@ ct_proto_port_check(const struct xt_conntrack_mtinfo1 *info,
 static bool
 conntrack_mt(const struct sk_buff *skb, const struct xt_match_param *par)
 {
-	const struct xt_conntrack_mtinfo1 *info = par->matchinfo;
+	const struct xt_conntrack_mtinfo2 *info = par->matchinfo;
 	enum ip_conntrack_info ctinfo;
 	const struct nf_conn *ct;
 	unsigned int statebit;
@@ -278,6 +278,16 @@ conntrack_mt(const struct sk_buff *skb, const struct xt_match_param *par)
 	return true;
 }
 
+static bool
+conntrack_mt_v1(const struct sk_buff *skb, const struct xt_match_param *par)
+{
+	const struct xt_conntrack_mtinfo2 *const *info = par->matchinfo;
+	struct xt_match_param newpar = *par;
+
+	newpar.matchinfo = *info;
+	return conntrack_mt(skb, &newpar);
+}
+
 static bool conntrack_mt_check(const struct xt_mtchk_param *par)
 {
 	if (nf_ct_l3proto_try_module_get(par->family) < 0) {
@@ -288,11 +298,45 @@ static bool conntrack_mt_check(const struct xt_mtchk_param *par)
 	return true;
 }
 
+static bool conntrack_mt_check_v1(const struct xt_mtchk_param *par)
+{
+	struct xt_conntrack_mtinfo1 *info = par->matchinfo;
+	struct xt_conntrack_mtinfo2 *up;
+	int ret = conntrack_mt_check(par);
+
+	if (ret < 0)
+		return ret;
+
+	up = kmalloc(sizeof(*up), GFP_KERNEL);
+	if (up == NULL) {
+		nf_ct_l3proto_module_put(par->family);
+		return -ENOMEM;
+	}
+
+	/*
+	 * The strategy here is to minimize the overhead of v1 matching,
+	 * by prebuilding a v2 struct and putting the pointer into the
+	 * v1 dataspace.
+	 */
+	memcpy(up, info, offsetof(typeof(*info), state_mask));
+	up->state_mask  = info->state_mask;
+	up->status_mask = info->status_mask;
+	*(void **)info  = up;
+	return true;
+}
+
 static void conntrack_mt_destroy(const struct xt_mtdtor_param *par)
 {
 	nf_ct_l3proto_module_put(par->family);
 }
 
+static void conntrack_mt_destroy_v1(const struct xt_mtdtor_param *par)
+{
+	struct xt_conntrack_mtinfo2 **info = par->matchinfo;
+	kfree(*info);
+	conntrack_mt_destroy(par);
+}
+
 #ifdef CONFIG_COMPAT
 struct compat_xt_conntrack_info
 {
@@ -363,6 +407,16 @@ static struct xt_match conntrack_mt_reg[] __read_mostly = {
 		.revision   = 1,
 		.family     = NFPROTO_UNSPEC,
 		.matchsize  = sizeof(struct xt_conntrack_mtinfo1),
+		.match      = conntrack_mt_v1,
+		.checkentry = conntrack_mt_check_v1,
+		.destroy    = conntrack_mt_destroy_v1,
+		.me         = THIS_MODULE,
+	},
+	{
+		.name       = "conntrack",
+		.revision   = 2,
+		.family     = NFPROTO_UNSPEC,
+		.matchsize  = sizeof(struct xt_conntrack_mtinfo2),
 		.match      = conntrack_mt,
 		.checkentry = conntrack_mt_check,
 		.destroy    = conntrack_mt_destroy,
diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c
index 863e40977a4..0f482e2440b 100644
--- a/net/netfilter/xt_osf.c
+++ b/net/netfilter/xt_osf.c
@@ -330,7 +330,8 @@ static bool xt_osf_match_packet(const struct sk_buff *skb,
 			fcount++;
 
 			if (info->flags & XT_OSF_LOG)
-				nf_log_packet(p->hooknum, 0, skb, p->in, p->out, NULL,
+				nf_log_packet(p->family, p->hooknum, skb,
+					p->in, p->out, NULL,
 					"%s [%s:%s] : %pi4:%d -> %pi4:%d hops=%d\n",
 					f->genre, f->version, f->subtype,
 					&ip->saddr, ntohs(tcp->source),
@@ -345,7 +346,7 @@ static bool xt_osf_match_packet(const struct sk_buff *skb,
 	rcu_read_unlock();
 
 	if (!fcount && (info->flags & XT_OSF_LOG))
-		nf_log_packet(p->hooknum, 0, skb, p->in, p->out, NULL,
+		nf_log_packet(p->family, p->hooknum, skb, p->in, p->out, NULL,
 			"Remote OS is not known: %pi4:%u -> %pi4:%u\n",
 				&ip->saddr, ntohs(tcp->source),
 				&ip->daddr, ntohs(tcp->dest));
diff --git a/net/netfilter/xt_quota.c b/net/netfilter/xt_quota.c
index 98fc190e8f0..390b7d09fe5 100644
--- a/net/netfilter/xt_quota.c
+++ b/net/netfilter/xt_quota.c
@@ -52,7 +52,7 @@ static bool quota_mt_check(const struct xt_mtchk_param *par)
 
 	q->master = kmalloc(sizeof(*q->master), GFP_KERNEL);
 	if (q->master == NULL)
-		return -ENOMEM;
+		return false;
 
 	q->master->quota = q->quota;
 	return true;
diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c
index b0e582f2d37..16e6c4378ff 100644
--- a/net/netlabel/netlabel_kapi.c
+++ b/net/netlabel/netlabel_kapi.c
@@ -151,7 +151,7 @@ int netlbl_cfg_unlbl_map_add(const char *domain,
 			addr6 = addr;
 			mask6 = mask;
 			map6 = kzalloc(sizeof(*map6), GFP_ATOMIC);
-			if (map4 == NULL)
+			if (map6 == NULL)
 				goto cfg_unlbl_map_add_failure;
 			map6->type = NETLBL_NLTYPE_UNLABELED;
 			ipv6_addr_copy(&map6->list.addr, addr6);
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index ce51ce012cd..ce1a34b99c2 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -847,6 +847,7 @@ static int nr_getname(struct socket *sock, struct sockaddr *uaddr,
 		sax->fsa_ax25.sax25_family = AF_NETROM;
 		sax->fsa_ax25.sax25_ndigis = 1;
 		sax->fsa_ax25.sax25_call   = nr->user_addr;
+		memset(sax->fsa_digipeater, 0, sizeof(sax->fsa_digipeater));
 		sax->fsa_digipeater[0]     = nr->dest_addr;
 		*uaddr_len = sizeof(struct full_sockaddr_ax25);
 	} else {
diff --git a/net/netrom/nr_route.c b/net/netrom/nr_route.c
index e943c16552a..4eb1ac9a767 100644
--- a/net/netrom/nr_route.c
+++ b/net/netrom/nr_route.c
@@ -630,23 +630,23 @@ out:
 	return dev;
 }
 
-static ax25_digi *nr_call_to_digi(int ndigis, ax25_address *digipeaters)
+static ax25_digi *nr_call_to_digi(ax25_digi *digi, int ndigis,
+	ax25_address *digipeaters)
 {
-	static ax25_digi ax25_digi;
 	int i;
 
 	if (ndigis == 0)
 		return NULL;
 
 	for (i = 0; i < ndigis; i++) {
-		ax25_digi.calls[i]    = digipeaters[i];
-		ax25_digi.repeated[i] = 0;
+		digi->calls[i]    = digipeaters[i];
+		digi->repeated[i] = 0;
 	}
 
-	ax25_digi.ndigi      = ndigis;
-	ax25_digi.lastrepeat = -1;
+	digi->ndigi      = ndigis;
+	digi->lastrepeat = -1;
 
-	return &ax25_digi;
+	return digi;
 }
 
 /*
@@ -656,6 +656,7 @@ int nr_rt_ioctl(unsigned int cmd, void __user *arg)
 {
 	struct nr_route_struct nr_route;
 	struct net_device *dev;
+	ax25_digi digi;
 	int ret;
 
 	switch (cmd) {
@@ -673,13 +674,15 @@ int nr_rt_ioctl(unsigned int cmd, void __user *arg)
 			ret = nr_add_node(&nr_route.callsign,
 				nr_route.mnemonic,
 				&nr_route.neighbour,
-				nr_call_to_digi(nr_route.ndigis, nr_route.digipeaters),
+				nr_call_to_digi(&digi, nr_route.ndigis,
+						nr_route.digipeaters),
 				dev, nr_route.quality,
 				nr_route.obs_count);
 			break;
 		case NETROM_NEIGH:
 			ret = nr_add_neigh(&nr_route.callsign,
-				nr_call_to_digi(nr_route.ndigis, nr_route.digipeaters),
+				nr_call_to_digi(&digi, nr_route.ndigis,
+						nr_route.digipeaters),
 				dev, nr_route.quality);
 			break;
 		default:
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index 80a322d7790..c2b77a69869 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -69,17 +69,34 @@ static struct phonet_device *__phonet_get(struct net_device *dev)
 	return NULL;
 }
 
-static void __phonet_device_free(struct phonet_device *pnd)
+static void phonet_device_destroy(struct net_device *dev)
 {
-	list_del(&pnd->list);
-	kfree(pnd);
+	struct phonet_device_list *pndevs = phonet_device_list(dev_net(dev));
+	struct phonet_device *pnd;
+
+	ASSERT_RTNL();
+
+	spin_lock_bh(&pndevs->lock);
+	pnd = __phonet_get(dev);
+	if (pnd)
+		list_del(&pnd->list);
+	spin_unlock_bh(&pndevs->lock);
+
+	if (pnd) {
+		u8 addr;
+
+		for (addr = find_first_bit(pnd->addrs, 64); addr < 64;
+			addr = find_next_bit(pnd->addrs, 64, 1+addr))
+			phonet_address_notify(RTM_DELADDR, dev, addr);
+		kfree(pnd);
+	}
 }
 
 struct net_device *phonet_device_get(struct net *net)
 {
 	struct phonet_device_list *pndevs = phonet_device_list(net);
 	struct phonet_device *pnd;
-	struct net_device *dev;
+	struct net_device *dev = NULL;
 
 	spin_lock_bh(&pndevs->lock);
 	list_for_each_entry(pnd, &pndevs->list, list) {
@@ -126,8 +143,10 @@ int phonet_address_del(struct net_device *dev, u8 addr)
 	pnd = __phonet_get(dev);
 	if (!pnd || !test_and_clear_bit(addr >> 2, pnd->addrs))
 		err = -EADDRNOTAVAIL;
-	else if (bitmap_empty(pnd->addrs, 64))
-		__phonet_device_free(pnd);
+	else if (bitmap_empty(pnd->addrs, 64)) {
+		list_del(&pnd->list);
+		kfree(pnd);
+	}
 	spin_unlock_bh(&pndevs->lock);
 	return err;
 }
@@ -181,18 +200,8 @@ static int phonet_device_notify(struct notifier_block *me, unsigned long what,
 {
 	struct net_device *dev = arg;
 
-	if (what == NETDEV_UNREGISTER) {
-		struct phonet_device_list *pndevs;
-		struct phonet_device *pnd;
-
-		/* Destroy phonet-specific device data */
-		pndevs = phonet_device_list(dev_net(dev));
-		spin_lock_bh(&pndevs->lock);
-		pnd = __phonet_get(dev);
-		if (pnd)
-			__phonet_device_free(pnd);
-		spin_unlock_bh(&pndevs->lock);
-	}
+	if (what == NETDEV_UNREGISTER)
+		phonet_device_destroy(dev);
 	return 0;
 
 }
@@ -218,11 +227,12 @@ static int phonet_init_net(struct net *net)
 static void phonet_exit_net(struct net *net)
 {
 	struct phonet_net *pnn = net_generic(net, phonet_net_id);
-	struct phonet_device *pnd, *n;
-
-	list_for_each_entry_safe(pnd, n, &pnn->pndevs.list, list)
-		__phonet_device_free(pnd);
+	struct net_device *dev;
 
+	rtnl_lock();
+	for_each_netdev(net, dev)
+		phonet_device_destroy(dev);
+	rtnl_unlock();
 	kfree(pnn);
 }
 
diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c
index cec4e595168..f8b4cee434c 100644
--- a/net/phonet/pn_netlink.c
+++ b/net/phonet/pn_netlink.c
@@ -32,7 +32,7 @@
 static int fill_addr(struct sk_buff *skb, struct net_device *dev, u8 addr,
 		     u32 pid, u32 seq, int event);
 
-static void rtmsg_notify(int event, struct net_device *dev, u8 addr)
+void phonet_address_notify(int event, struct net_device *dev, u8 addr)
 {
 	struct sk_buff *skb;
 	int err = -ENOBUFS;
@@ -94,7 +94,7 @@ static int addr_doit(struct sk_buff *skb, struct nlmsghdr *nlh, void *attr)
 	else
 		err = phonet_address_del(dev, pnaddr);
 	if (!err)
-		rtmsg_notify(nlh->nlmsg_type, dev, pnaddr);
+		phonet_address_notify(nlh->nlmsg_type, dev, pnaddr);
 	return err;
 }
 
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 79693fe2001..2fc4a1724eb 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -549,6 +549,10 @@ void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
 	swprev = !!(rfkill->state & RFKILL_BLOCK_SW);
 	hwprev = !!(rfkill->state & RFKILL_BLOCK_HW);
 	__rfkill_set_sw_state(rfkill, sw);
+	if (hw)
+		rfkill->state |= RFKILL_BLOCK_HW;
+	else
+		rfkill->state &= ~RFKILL_BLOCK_HW;
 
 	spin_unlock_irqrestore(&rfkill->lock, flags);
 
@@ -648,15 +652,26 @@ static ssize_t rfkill_state_store(struct device *dev,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
-	/*
-	 * The intention was that userspace can only take control over
-	 * a given device when/if rfkill-input doesn't control it due
-	 * to user_claim. Since user_claim is currently unsupported,
-	 * we never support changing the state from userspace -- this
-	 * can be implemented again later.
-	 */
+	struct rfkill *rfkill = to_rfkill(dev);
+	unsigned long state;
+	int err;
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	err = strict_strtoul(buf, 0, &state);
+	if (err)
+		return err;
+
+	if (state != RFKILL_USER_STATE_SOFT_BLOCKED &&
+	    state != RFKILL_USER_STATE_UNBLOCKED)
+		return -EINVAL;
+
+	mutex_lock(&rfkill_global_mutex);
+	rfkill_set_block(rfkill, state == RFKILL_USER_STATE_SOFT_BLOCKED);
+	mutex_unlock(&rfkill_global_mutex);
 
-	return -EPERM;
+	return err ?: count;
 }
 
 static ssize_t rfkill_claim_show(struct device *dev,
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 6bd8e93869e..e5f478ca3d6 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -92,23 +92,21 @@ static void rose_set_lockdep_key(struct net_device *dev)
 /*
  *	Convert a ROSE address into text.
  */
-const char *rose2asc(const rose_address *addr)
+char *rose2asc(char *buf, const rose_address *addr)
 {
-	static char buffer[11];
-
 	if (addr->rose_addr[0] == 0x00 && addr->rose_addr[1] == 0x00 &&
 	    addr->rose_addr[2] == 0x00 && addr->rose_addr[3] == 0x00 &&
 	    addr->rose_addr[4] == 0x00) {
-		strcpy(buffer, "*");
+		strcpy(buf, "*");
 	} else {
-		sprintf(buffer, "%02X%02X%02X%02X%02X", addr->rose_addr[0] & 0xFF,
+		sprintf(buf, "%02X%02X%02X%02X%02X", addr->rose_addr[0] & 0xFF,
 						addr->rose_addr[1] & 0xFF,
 						addr->rose_addr[2] & 0xFF,
 						addr->rose_addr[3] & 0xFF,
 						addr->rose_addr[4] & 0xFF);
 	}
 
-	return buffer;
+	return buf;
 }
 
 /*
@@ -956,6 +954,7 @@ static int rose_getname(struct socket *sock, struct sockaddr *uaddr,
 	struct rose_sock *rose = rose_sk(sk);
 	int n;
 
+	memset(srose, 0, sizeof(*srose));
 	if (peer != 0) {
 		if (sk->sk_state != TCP_ESTABLISHED)
 			return -ENOTCONN;
@@ -1437,7 +1436,7 @@ static void rose_info_stop(struct seq_file *seq, void *v)
 
 static int rose_info_show(struct seq_file *seq, void *v)
 {
-	char buf[11];
+	char buf[11], rsbuf[11];
 
 	if (v == SEQ_START_TOKEN)
 		seq_puts(seq,
@@ -1455,8 +1454,8 @@ static int rose_info_show(struct seq_file *seq, void *v)
 			devname = dev->name;
 
 		seq_printf(seq, "%-10s %-9s ",
-			rose2asc(&rose->dest_addr),
-			ax2asc(buf, &rose->dest_call));
+			   rose2asc(rsbuf, &rose->dest_addr),
+			   ax2asc(buf, &rose->dest_call));
 
 		if (ax25cmp(&rose->source_call, &null_ax25_address) == 0)
 			callsign = "??????-?";
@@ -1465,7 +1464,7 @@ static int rose_info_show(struct seq_file *seq, void *v)
 
 		seq_printf(seq,
 			   "%-10s %-9s %-5s %3.3X %05d  %d  %d  %d  %d %3lu %3lu %3lu %3lu %3lu %3lu/%03lu %5d %5d %ld\n",
-			rose2asc(&rose->source_addr),
+			rose2asc(rsbuf, &rose->source_addr),
 			callsign,
 			devname,
 			rose->lci & 0x0FFF,
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index a81066a1010..9478d9b3d97 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -1104,6 +1104,7 @@ static void rose_node_stop(struct seq_file *seq, void *v)
 
 static int rose_node_show(struct seq_file *seq, void *v)
 {
+	char rsbuf[11];
 	int i;
 
 	if (v == SEQ_START_TOKEN)
@@ -1112,13 +1113,13 @@ static int rose_node_show(struct seq_file *seq, void *v)
 		const struct rose_node *rose_node = v;
 		/* if (rose_node->loopback) {
 			seq_printf(seq, "%-10s %04d 1 loopback\n",
-				rose2asc(&rose_node->address),
-				rose_node->mask);
+				   rose2asc(rsbuf, &rose_node->address),
+				   rose_node->mask);
 		} else { */
 			seq_printf(seq, "%-10s %04d %d",
-				rose2asc(&rose_node->address),
-				rose_node->mask,
-				rose_node->count);
+				   rose2asc(rsbuf, &rose_node->address),
+				   rose_node->mask,
+				   rose_node->count);
 
 			for (i = 0; i < rose_node->count; i++)
 				seq_printf(seq, " %05d",
@@ -1267,7 +1268,7 @@ static void rose_route_stop(struct seq_file *seq, void *v)
 
 static int rose_route_show(struct seq_file *seq, void *v)
 {
-	char buf[11];
+	char buf[11], rsbuf[11];
 
 	if (v == SEQ_START_TOKEN)
 		seq_puts(seq,
@@ -1279,7 +1280,7 @@ static int rose_route_show(struct seq_file *seq, void *v)
 			seq_printf(seq,
 				   "%3.3X  %-10s  %-9s  %05d      ",
 				   rose_route->lci1,
-				   rose2asc(&rose_route->src_addr),
+				   rose2asc(rsbuf, &rose_route->src_addr),
 				   ax2asc(buf, &rose_route->src_call),
 				   rose_route->neigh1->number);
 		else
@@ -1289,10 +1290,10 @@ static int rose_route_show(struct seq_file *seq, void *v)
 		if (rose_route->neigh2)
 			seq_printf(seq,
 				   "%3.3X  %-10s  %-9s  %05d\n",
-				rose_route->lci2,
-				rose2asc(&rose_route->dest_addr),
-				ax2asc(buf, &rose_route->dest_call),
-				rose_route->neigh2->number);
+				   rose_route->lci2,
+				   rose2asc(rsbuf, &rose_route->dest_addr),
+				   ax2asc(buf, &rose_route->dest_call),
+				   rose_route->neigh2->number);
 		 else
 			 seq_puts(seq,
 				  "000  *           *          00000\n");
diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c
index eac5e7bb736..bfe493ebf27 100644
--- a/net/rxrpc/af_rxrpc.c
+++ b/net/rxrpc/af_rxrpc.c
@@ -63,7 +63,7 @@ static void rxrpc_write_space(struct sock *sk)
 	_enter("%p", sk);
 	read_lock(&sk->sk_callback_lock);
 	if (rxrpc_writable(sk)) {
-		if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+		if (sk_has_sleeper(sk))
 			wake_up_interruptible(sk->sk_sleep);
 		sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
 	}
@@ -588,7 +588,7 @@ static unsigned int rxrpc_poll(struct file *file, struct socket *sock,
 	unsigned int mask;
 	struct sock *sk = sock->sk;
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 	mask = 0;
 
 	/* the socket is readable if there are any messages waiting on the Rx
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 24d17ce9c29..fdb694e9f75 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1456,6 +1456,8 @@ static int tc_fill_tclass(struct sk_buff *skb, struct Qdisc *q,
 	nlh = NLMSG_NEW(skb, pid, seq, event, sizeof(*tcm), flags);
 	tcm = NLMSG_DATA(nlh);
 	tcm->tcm_family = AF_UNSPEC;
+	tcm->tcm__pad1 = 0;
+	tcm->tcm__pad2 = 0;
 	tcm->tcm_ifindex = qdisc_dev(q)->ifindex;
 	tcm->tcm_parent = q->handle;
 	tcm->tcm_handle = q->handle;
diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c
index 2a8b83af7c4..ab82f145f68 100644
--- a/net/sched/sch_atm.c
+++ b/net/sched/sch_atm.c
@@ -49,7 +49,7 @@ struct atm_flow_data {
 	struct socket		*sock;		/* for closing */
 	u32			classid;	/* x:y type ID */
 	int			ref;		/* reference count */
-	struct gnet_stats_basic	bstats;
+	struct gnet_stats_basic_packed	bstats;
 	struct gnet_stats_queue	qstats;
 	struct atm_flow_data	*next;
 	struct atm_flow_data	*excess;	/* flow for excess traffic;
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 23a167670fd..d5798e17a83 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -128,7 +128,7 @@ struct cbq_class
 	long			avgidle;
 	long			deficit;	/* Saved deficit for WRR */
 	psched_time_t		penalized;
-	struct gnet_stats_basic bstats;
+	struct gnet_stats_basic_packed bstats;
 	struct gnet_stats_queue qstats;
 	struct gnet_stats_rate_est rate_est;
 	struct tc_cbq_xstats	xstats;
diff --git a/net/sched/sch_drr.c b/net/sched/sch_drr.c
index 7597fe14686..12b2fb04b29 100644
--- a/net/sched/sch_drr.c
+++ b/net/sched/sch_drr.c
@@ -22,7 +22,7 @@ struct drr_class {
 	unsigned int			refcnt;
 	unsigned int			filter_cnt;
 
-	struct gnet_stats_basic		bstats;
+	struct gnet_stats_basic_packed		bstats;
 	struct gnet_stats_queue		qstats;
 	struct gnet_stats_rate_est	rate_est;
 	struct list_head		alist;
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index 362c2811b2d..dad0144423d 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -116,7 +116,7 @@ struct hfsc_class
 	struct Qdisc_class_common cl_common;
 	unsigned int	refcnt;		/* usage count */
 
-	struct gnet_stats_basic bstats;
+	struct gnet_stats_basic_packed bstats;
 	struct gnet_stats_queue qstats;
 	struct gnet_stats_rate_est rate_est;
 	unsigned int	level;		/* class level in hierarchy */
diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 88cd0262662..ec4d46399d5 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -74,7 +74,7 @@ enum htb_cmode {
 struct htb_class {
 	struct Qdisc_class_common common;
 	/* general class parameters */
-	struct gnet_stats_basic bstats;
+	struct gnet_stats_basic_packed bstats;
 	struct gnet_stats_queue qstats;
 	struct gnet_stats_rate_est rate_est;
 	struct tc_htb_xstats xstats;	/* our special stats */
diff --git a/net/sctp/output.c b/net/sctp/output.c
index b7641144451..b94c2119056 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -407,7 +407,7 @@ int sctp_packet_transmit(struct sctp_packet *packet)
 	}
 	dst = dst_clone(tp->dst);
 	skb_dst_set(nskb, dst);
-	if (dst)
+	if (!dst)
 		goto no_route;
 
 	/* Build the SCTP header.  */
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 79cbd47f4df..a76da657244 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -160,6 +160,7 @@ static void sctp_proc_exit(void)
 		remove_proc_entry("sctp", init_net.proc_net);
 	}
 #endif
+	percpu_counter_destroy(&sctp_sockets_allocated);
 }
 
 /* Private helper to extract ipv4 address and stash them in
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 35ba035970a..971890dbfea 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -6652,21 +6652,6 @@ static void sctp_wait_for_close(struct sock *sk, long timeout)
 	finish_wait(sk->sk_sleep, &wait);
 }
 
-static void sctp_sock_rfree_frag(struct sk_buff *skb)
-{
-	struct sk_buff *frag;
-
-	if (!skb->data_len)
-		goto done;
-
-	/* Don't forget the fragments. */
-	skb_walk_frags(skb, frag)
-		sctp_sock_rfree_frag(frag);
-
-done:
-	sctp_sock_rfree(skb);
-}
-
 static void sctp_skb_set_owner_r_frag(struct sk_buff *skb, struct sock *sk)
 {
 	struct sk_buff *frag;
@@ -6776,7 +6761,6 @@ static void sctp_sock_migrate(struct sock *oldsk, struct sock *newsk,
 	sctp_skb_for_each(skb, &oldsk->sk_receive_queue, tmp) {
 		event = sctp_skb2event(skb);
 		if (event->asoc == assoc) {
-			sctp_sock_rfree_frag(skb);
 			__skb_unlink(skb, &oldsk->sk_receive_queue);
 			__skb_queue_tail(&newsk->sk_receive_queue, skb);
 			sctp_skb_set_owner_r_frag(skb, newsk);
@@ -6807,7 +6791,6 @@ static void sctp_sock_migrate(struct sock *oldsk, struct sock *newsk,
 		sctp_skb_for_each(skb, &oldsp->pd_lobby, tmp) {
 			event = sctp_skb2event(skb);
 			if (event->asoc == assoc) {
-				sctp_sock_rfree_frag(skb);
 				__skb_unlink(skb, &oldsp->pd_lobby);
 				__skb_queue_tail(queue, skb);
 				sctp_skb_set_owner_r_frag(skb, newsk);
@@ -6822,15 +6805,11 @@ static void sctp_sock_migrate(struct sock *oldsk, struct sock *newsk,
 
 	}
 
-	sctp_skb_for_each(skb, &assoc->ulpq.reasm, tmp) {
-		sctp_sock_rfree_frag(skb);
+	sctp_skb_for_each(skb, &assoc->ulpq.reasm, tmp)
 		sctp_skb_set_owner_r_frag(skb, newsk);
-	}
 
-	sctp_skb_for_each(skb, &assoc->ulpq.lobby, tmp) {
-		sctp_sock_rfree_frag(skb);
+	sctp_skb_for_each(skb, &assoc->ulpq.lobby, tmp)
 		sctp_skb_set_owner_r_frag(skb, newsk);
-	}
 
 	/* Set the type of socket to indicate that it is peeled off from the
 	 * original UDP-style socket or created with the accept() call on a
diff --git a/net/socket.c b/net/socket.c
index 791d71a36a9..6d471655904 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -736,7 +736,7 @@ static ssize_t sock_sendpage(struct file *file, struct page *page,
 	if (more)
 		flags |= MSG_MORE;
 
-	return sock->ops->sendpage(sock, page, offset, size, flags);
+	return kernel_sendpage(sock, page, offset, size, flags);
 }
 
 static ssize_t sock_splice_read(struct file *file, loff_t *ppos,
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 5bc2f45bddf..df1039f077c 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -28,7 +28,6 @@
 #include <linux/kallsyms.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/utsname.h>
 #include <linux/workqueue.h>
 #include <linux/in6.h>
@@ -938,6 +937,7 @@ static inline void
 rpc_task_force_reencode(struct rpc_task *task)
 {
 	task->tk_rqstp->rq_snd_buf.len = 0;
+	task->tk_rqstp->rq_bytes_sent = 0;
 }
 
 static inline void
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 1102ce1251f..8f459abe97c 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -16,7 +16,6 @@
 #include <linux/slab.h>
 #include <linux/mempool.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 
diff --git a/net/sunrpc/sunrpc_syms.c b/net/sunrpc/sunrpc_syms.c
index 843629f5576..adaa81982f7 100644
--- a/net/sunrpc/sunrpc_syms.c
+++ b/net/sunrpc/sunrpc_syms.c
@@ -66,6 +66,7 @@ cleanup_sunrpc(void)
 #ifdef CONFIG_PROC_FS
 	rpc_proc_exit();
 #endif
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 MODULE_LICENSE("GPL");
 module_init(init_sunrpc);
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index 6f33d33cc06..27d44332f01 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -5,6 +5,7 @@
  */
 
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/freezer.h>
 #include <linux/kthread.h>
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 36d4e44d623..fc3ebb90691 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -315,7 +315,7 @@ static void unix_write_space(struct sock *sk)
 {
 	read_lock(&sk->sk_callback_lock);
 	if (unix_writable(sk)) {
-		if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+		if (sk_has_sleeper(sk))
 			wake_up_interruptible_sync(sk->sk_sleep);
 		sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
 	}
@@ -1985,7 +1985,7 @@ static unsigned int unix_poll(struct file *file, struct socket *sock, poll_table
 	struct sock *sk = sock->sk;
 	unsigned int mask;
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 	mask = 0;
 
 	/* exceptional events? */
@@ -2022,7 +2022,7 @@ static unsigned int unix_dgram_poll(struct file *file, struct socket *sock,
 	struct sock *sk = sock->sk, *other;
 	unsigned int mask, writable;
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 	mask = 0;
 
 	/* exceptional events? */
@@ -2053,7 +2053,7 @@ static unsigned int unix_dgram_poll(struct file *file, struct socket *sock,
 		other = unix_peer_get(sk);
 		if (other) {
 			if (unix_peer(other) != sk) {
-				poll_wait(file, &unix_sk(other)->peer_wait,
+				sock_poll_wait(file, &unix_sk(other)->peer_wait,
 					  wait);
 				if (unix_recvq_full(other))
 					writable = 0;
diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c
index 466e2d22d25..258daa80ad9 100644
--- a/net/wanrouter/wanmain.c
+++ b/net/wanrouter/wanmain.c
@@ -48,6 +48,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>	/* support for loadable modules */
 #include <linux/slab.h>		/* kmalloc(), kfree() */
+#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/string.h>	/* inline mem*, str* functions */
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 241bddd0b4f..634496b3ed7 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -447,6 +447,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 
 	rdev = __cfg80211_drv_from_info(info);
 	if (IS_ERR(rdev)) {
+		mutex_unlock(&cfg80211_mutex);
 		result = PTR_ERR(rdev);
 		goto unlock;
 	}
@@ -996,7 +997,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 
 	if (IS_ERR(hdr)) {
 		err = PTR_ERR(hdr);
-		goto out;
+		goto free_msg;
 	}
 
 	cookie.msg = msg;
@@ -1010,7 +1011,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 				&cookie, get_key_callback);
 
 	if (err)
-		goto out;
+		goto free_msg;
 
 	if (cookie.error)
 		goto nla_put_failure;
@@ -1021,6 +1022,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 
  nla_put_failure:
 	err = -ENOBUFS;
+ free_msg:
 	nlmsg_free(msg);
  out:
 	cfg80211_put_dev(drv);
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 5e14371cda7..75a406d3361 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1089,17 +1089,18 @@ static void handle_reg_beacon(struct wiphy *wiphy,
 
 	chan->beacon_found = true;
 
+	if (wiphy->disable_beacon_hints)
+		return;
+
 	chan_before.center_freq = chan->center_freq;
 	chan_before.flags = chan->flags;
 
-	if ((chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
-	    !(chan->orig_flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
+	if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) {
 		chan->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
 		channel_changed = true;
 	}
 
-	if ((chan->flags & IEEE80211_CHAN_NO_IBSS) &&
-	    !(chan->orig_flags & IEEE80211_CHAN_NO_IBSS)) {
+	if (chan->flags & IEEE80211_CHAN_NO_IBSS) {
 		chan->flags &= ~IEEE80211_CHAN_NO_IBSS;
 		channel_changed = true;
 	}
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index e37829a49dc..4e167a8e11b 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -30,7 +30,8 @@ int set_regdom(const struct ieee80211_regdomain *rd);
  * non-radar 5 GHz channels.
  *
  * Drivers do not need to call this, cfg80211 will do it for after a scan
- * on a newly found BSS.
+ * on a newly found BSS. If you cannot make use of this feature you can
+ * set the wiphy->disable_beacon_hints to true.
  */
 int regulatory_hint_found_beacon(struct wiphy *wiphy,
 					struct ieee80211_channel *beacon_chan,
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index e95b638b919..7e595ce24ee 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -35,8 +35,6 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
 	else
 		nl80211_send_scan_done(wiphy_to_dev(request->wiphy), dev);
 
-	wiphy_to_dev(request->wiphy)->scan_req = NULL;
-
 #ifdef CONFIG_WIRELESS_EXT
 	if (!aborted) {
 		memset(&wrqu, 0, sizeof(wrqu));
@@ -48,6 +46,7 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
 	dev_put(dev);
 
  out:
+	wiphy_to_dev(request->wiphy)->scan_req = NULL;
 	kfree(request);
 }
 EXPORT_SYMBOL(cfg80211_scan_done);
@@ -119,7 +118,7 @@ static int cmp_ies(u8 num, u8 *ies1, size_t len1, u8 *ies2, size_t len2)
 
 	if (!ie1 && !ie2)
 		return 0;
-	if (!ie1)
+	if (!ie1 || !ie2)
 		return -1;
 
 	r = memcmp(ie1 + 2, ie2 + 2, min(ie1[1], ie2[1]));
@@ -172,6 +171,8 @@ static bool is_mesh(struct cfg80211_bss *a,
 	ie = find_ie(WLAN_EID_MESH_CONFIG,
 		     a->information_elements,
 		     a->len_information_elements);
+	if (!ie)
+		return false;
 	if (ie[1] != IEEE80211_MESH_CONFIG_LEN)
 		return false;
 
@@ -366,7 +367,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 	found = rb_find_bss(dev, res);
 
 	if (found) {
-		kref_get(&found->ref);
 		found->pub.beacon_interval = res->pub.beacon_interval;
 		found->pub.tsf = res->pub.tsf;
 		found->pub.signal = res->pub.signal;
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 21cdc872004..5e6c072c64d 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -40,6 +40,7 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/timer.h>
 #include <linux/string.h>
 #include <linux/net.h>
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index d31ccb48773..faf54c6bf96 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -292,8 +292,8 @@ static struct xfrm_algo_desc ealg_list[] = {
 	}
 },
 {
-	.name = "cbc(cast128)",
-	.compat = "cast128",
+	.name = "cbc(cast5)",
+	.compat = "cast5",
 
 	.uinfo = {
 		.encr = {
diff --git a/net/xfrm/xfrm_hash.h b/net/xfrm/xfrm_hash.h
index d401dc8f05e..e5195c99f71 100644
--- a/net/xfrm/xfrm_hash.h
+++ b/net/xfrm/xfrm_hash.h
@@ -16,7 +16,7 @@ static inline unsigned int __xfrm6_addr_hash(xfrm_address_t *addr)
 
 static inline unsigned int __xfrm4_daddr_saddr_hash(xfrm_address_t *daddr, xfrm_address_t *saddr)
 {
-	return ntohl(daddr->a4 ^ saddr->a4);
+	return ntohl(daddr->a4 + saddr->a4);
 }
 
 static inline unsigned int __xfrm6_daddr_saddr_hash(xfrm_address_t *daddr, xfrm_address_t *saddr)
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 5f1f86565f1..f2f7c638083 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -668,22 +668,10 @@ static struct xfrm_state *__xfrm_state_lookup(struct net *net, xfrm_address_t *d
 	hlist_for_each_entry(x, entry, net->xfrm.state_byspi+h, byspi) {
 		if (x->props.family != family ||
 		    x->id.spi       != spi ||
-		    x->id.proto     != proto)
+		    x->id.proto     != proto ||
+		    xfrm_addr_cmp(&x->id.daddr, daddr, family))
 			continue;
 
-		switch (family) {
-		case AF_INET:
-			if (x->id.daddr.a4 != daddr->a4)
-				continue;
-			break;
-		case AF_INET6:
-			if (!ipv6_addr_equal((struct in6_addr *)daddr,
-					     (struct in6_addr *)
-					     x->id.daddr.a6))
-				continue;
-			break;
-		}
-
 		xfrm_state_hold(x);
 		return x;
 	}
@@ -699,26 +687,11 @@ static struct xfrm_state *__xfrm_state_lookup_byaddr(struct net *net, xfrm_addre
 
 	hlist_for_each_entry(x, entry, net->xfrm.state_bysrc+h, bysrc) {
 		if (x->props.family != family ||
-		    x->id.proto     != proto)
+		    x->id.proto     != proto ||
+		    xfrm_addr_cmp(&x->id.daddr, daddr, family) ||
+		    xfrm_addr_cmp(&x->props.saddr, saddr, family))
 			continue;
 
-		switch (family) {
-		case AF_INET:
-			if (x->id.daddr.a4 != daddr->a4 ||
-			    x->props.saddr.a4 != saddr->a4)
-				continue;
-			break;
-		case AF_INET6:
-			if (!ipv6_addr_equal((struct in6_addr *)daddr,
-					     (struct in6_addr *)
-					     x->id.daddr.a6) ||
-			    !ipv6_addr_equal((struct in6_addr *)saddr,
-					     (struct in6_addr *)
-					     x->props.saddr.a6))
-				continue;
-			break;
-		}
-
 		xfrm_state_hold(x);
 		return x;
 	}
@@ -1001,25 +974,11 @@ static struct xfrm_state *__find_acq_core(struct net *net, unsigned short family
 		    x->props.family != family ||
 		    x->km.state     != XFRM_STATE_ACQ ||
 		    x->id.spi       != 0 ||
-		    x->id.proto	    != proto)
+		    x->id.proto	    != proto ||
+		    xfrm_addr_cmp(&x->id.daddr, daddr, family) ||
+		    xfrm_addr_cmp(&x->props.saddr, saddr, family))
 			continue;
 
-		switch (family) {
-		case AF_INET:
-			if (x->id.daddr.a4    != daddr->a4 ||
-			    x->props.saddr.a4 != saddr->a4)
-				continue;
-			break;
-		case AF_INET6:
-			if (!ipv6_addr_equal((struct in6_addr *)x->id.daddr.a6,
-					     (struct in6_addr *)daddr) ||
-			    !ipv6_addr_equal((struct in6_addr *)
-					     x->props.saddr.a6,
-					     (struct in6_addr *)saddr))
-				continue;
-			break;
-		}
-
 		xfrm_state_hold(x);
 		return x;
 	}
diff --git a/samples/trace_events/trace-events-sample.h b/samples/trace_events/trace-events-sample.h
index 9977a756fb3..f24ae370e51 100644
--- a/samples/trace_events/trace-events-sample.h
+++ b/samples/trace_events/trace-events-sample.h
@@ -1,21 +1,4 @@
 /*
- * Notice that this file is not protected like a normal header.
- * We also must allow for rereading of this file. The
- *
- *  || defined(TRACE_HEADER_MULTI_READ)
- *
- * serves this purpose.
- */
-#if !defined(_TRACE_EVENT_SAMPLE_H) || defined(TRACE_HEADER_MULTI_READ)
-#define _TRACE_EVENT_SAMPLE_H
-
-/*
- * All trace headers should include tracepoint.h, until we finally
- * make it into a standard header.
- */
-#include <linux/tracepoint.h>
-
-/*
  * If TRACE_SYSTEM is defined, that will be the directory created
  * in the ftrace directory under /debugfs/tracing/events/<system>
  *
@@ -34,11 +17,31 @@
  * #define TRACE_INCLUDE_FILE trace-events-sample
  *
  * As we do an the bottom of this file.
+ *
+ * Notice that TRACE_SYSTEM should be defined outside of #if
+ * protection, just like TRACE_INCLUDE_FILE.
  */
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM sample
 
 /*
+ * Notice that this file is not protected like a normal header.
+ * We also must allow for rereading of this file. The
+ *
+ *  || defined(TRACE_HEADER_MULTI_READ)
+ *
+ * serves this purpose.
+ */
+#if !defined(_TRACE_EVENT_SAMPLE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EVENT_SAMPLE_H
+
+/*
+ * All trace headers should include tracepoint.h, until we finally
+ * make it into a standard header.
+ */
+#include <linux/tracepoint.h>
+
+/*
  * The TRACE_EVENT macro is broken up into 5 parts.
  *
  * name: name of the trace point. This is also how to enable the tracepoint.
diff --git a/scripts/.gitignore b/scripts/.gitignore
index b939fbd0119..52cab46ae35 100644
--- a/scripts/.gitignore
+++ b/scripts/.gitignore
@@ -7,3 +7,4 @@ pnmtologo
 bin2c
 unifdef
 binoffset
+ihex2fw
diff --git a/scripts/dtc/.gitignore b/scripts/dtc/.gitignore
new file mode 100644
index 00000000000..095acb49a37
--- /dev/null
+++ b/scripts/dtc/.gitignore
@@ -0,0 +1,5 @@
+dtc
+dtc-lexer.lex.c
+dtc-parser.tab.c
+dtc-parser.tab.h
+
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 3e733146cd5..278a45bd45a 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -13,7 +13,7 @@
 use strict;
 
 my $P = $0;
-my $V = '0.16';
+my $V = '0.17';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
@@ -27,6 +27,7 @@ my $email_git = 1;
 my $email_git_penguin_chiefs = 0;
 my $email_git_min_signatures = 1;
 my $email_git_max_maintainers = 5;
+my $email_git_min_percent = 5;
 my $email_git_since = "1-year-ago";
 my $output_multiline = 1;
 my $output_separator = ", ";
@@ -65,6 +66,7 @@ if (!GetOptions(
 		'git-chief-penguins!' => \$email_git_penguin_chiefs,
 		'git-min-signatures=i' => \$email_git_min_signatures,
 		'git-max-maintainers=i' => \$email_git_max_maintainers,
+		'git-min-percent=i' => \$email_git_min_percent,
 		'git-since=s' => \$email_git_since,
 		'm!' => \$email_maintainer,
 		'n!' => \$email_usename,
@@ -132,6 +134,10 @@ while (<MAINT>) {
 	    $value =~ s@\.@\\\.@g;       ##Convert . to \.
 	    $value =~ s/\*/\.\*/g;       ##Convert * to .*
 	    $value =~ s/\?/\./g;         ##Convert ? to .
+	    ##if pattern is a directory and it lacks a trailing slash, add one
+	    if ((-d $value)) {
+		$value =~ s@([^/])$@$1/@;
+	    }
 	}
 	push(@typevalue, "$type:$value");
     } elsif (!/^(\s)*$/) {
@@ -146,8 +152,10 @@ close(MAINT);
 my @files = ();
 
 foreach my $file (@ARGV) {
-    next if ((-d $file));
-    if (!(-f $file)) {
+    ##if $file is a directory and it lacks a trailing slash, add one
+    if ((-d $file)) {
+	$file =~ s@([^/])$@$1/@;
+    } elsif (!(-f $file)) {
 	die "$P: file '${file}' not found\n";
     }
     if ($from_filename) {
@@ -292,7 +300,7 @@ sub file_match_pattern {
 sub usage {
     print <<EOT;
 usage: $P [options] patchfile
-       $P [options] -f file
+       $P [options] -f file|directory
 version: $V
 
 MAINTAINER field selection options:
@@ -301,6 +309,7 @@ MAINTAINER field selection options:
     --git-chief-penguins => include ${penguin_chiefs}
     --git-min-signatures => number of signatures required (default: 1)
     --git-max-maintainers => maximum maintainers to add (default: 5)
+    --git-min-percent => minimum percentage of commits required (default: 5)
     --git-since => git history to use (default: 1-year-ago)
     --m => include maintainer(s) if any
     --n => include name 'Full Name <addr\@domain.tld>'
@@ -322,6 +331,15 @@ Other options:
   --version => show version
   --help => show this help information
 
+Notes:
+  Using "-f directory" may give unexpected results:
+
+  Used with "--git", git signators for _all_ files in and below
+     directory are examined as git recurses directories.
+     Any specified X: (exclude) pattern matches are _not_ ignored.
+  Used with "--nogit", directory is used as a pattern match,
+     no individual file within the directory or subdirectory
+     is matched.
 EOT
 }
 
@@ -482,6 +500,7 @@ sub recent_git_signoffs {
     my $output = "";
     my $count = 0;
     my @lines = ();
+    my $total_sign_offs;
 
     if (which("git") eq "") {
 	warn("$P: git not found.  Add --nogit to options?\n");
@@ -505,17 +524,26 @@ sub recent_git_signoffs {
     $output =~ s/^\s*//gm;
 
     @lines = split("\n", $output);
+
+    $total_sign_offs = 0;
+    foreach my $line (@lines) {
+	if ($line =~ m/([0-9]+)\s+(.*)/) {
+	    $total_sign_offs += $1;
+	} else {
+	    die("$P: Unexpected git output: ${line}\n");
+	}
+    }
+
     foreach my $line (@lines) {
 	if ($line =~ m/([0-9]+)\s+(.*)/) {
 	    my $sign_offs = $1;
 	    $line = $2;
 	    $count++;
 	    if ($sign_offs < $email_git_min_signatures ||
-	        $count > $email_git_max_maintainers) {
+	        $count > $email_git_max_maintainers ||
+		$sign_offs * 100 / $total_sign_offs < $email_git_min_percent) {
 		last;
 	    }
-	} else {
-	    die("$P: Unexpected git output: ${line}\n");
 	}
 	if ($line =~ m/(.+)<(.+)>/) {
 	    my $git_name = $1;
diff --git a/scripts/kconfig/lxdialog/util.c b/scripts/kconfig/lxdialog/util.c
index 86d95cca46a..f2375ad7ebc 100644
--- a/scripts/kconfig/lxdialog/util.c
+++ b/scripts/kconfig/lxdialog/util.c
@@ -19,6 +19,8 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <stdarg.h>
+
 #include "dialog.h"
 
 struct dialog_info dlg;
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 3bcacb4bfd3..25b60bc117f 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -888,6 +888,8 @@ int main(int ac, char **av)
 			single_menu_mode = 1;
 	}
 
+	initscr();
+
 	getyx(stdscr, saved_y, saved_x);
 	if (init_dialog(NULL)) {
 		fprintf(stderr, N_("Your display is too small to run Menuconfig!\n"));
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index ed591e9b7d1..b52d340d759 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1426,6 +1426,8 @@ sub dump_struct($$) {
 	# strip comments:
 	$members =~ s/\/\*.*?\*\///gos;
 	$nested =~ s/\/\*.*?\*\///gos;
+	# strip kmemcheck_bitfield_{begin,end}.*;
+	$members =~ s/kmemcheck_bitfield_.*?;//gos;
 
 	create_parameterlist($members, ';', $file);
 	check_sections($file, $declaration_name, "struct", $sectcheck, $struct_actual, $nested);
@@ -1468,8 +1470,6 @@ sub dump_enum($$) {
 	    }
 
 	}
-	# strip kmemcheck_bitfield_{begin,end}.*;
-	$members =~ s/kmemcheck_bitfield_.*?;//gos;
 
 	output_declaration($declaration_name,
 			   'enum',
diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl
index 528492bcba5..89774011965 100644
--- a/scripts/markup_oops.pl
+++ b/scripts/markup_oops.pl
@@ -1,6 +1,7 @@
 #!/usr/bin/perl
 
 use File::Basename;
+use Math::BigInt;
 
 # Copyright 2008, Intel Corporation
 #
@@ -172,8 +173,8 @@ while (<STDIN>) {
 	parse_x86_regs($line);
 }
 
-my $decodestart = hex($target) - hex($func_offset);
-my $decodestop = hex($target) + 8192;
+my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset");
+my $decodestop = Math::BigInt->from_hex("0x$target") + 8192;
 if ($target eq "0") {
 	print "No oops found!\n";
 	print "Usage: \n";
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index 01c2d13dd02..8b357b0bd25 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -16,6 +16,8 @@ create_package() {
 	local pname="$1" pdir="$2"
 
 	cp debian/copyright "$pdir/usr/share/doc/$pname/"
+	cp debian/changelog "$pdir/usr/share/doc/$pname/changelog.Debian"
+	gzip -9 "$pdir/usr/share/doc/$pname/changelog.Debian"
 
 	# Fix ownership and permissions
 	chown -R root:root "$pdir"
@@ -87,7 +89,7 @@ for script in postinst postrm preinst prerm ; do
 set -e
 
 # Pass maintainer script parameters to hook scripts
-export DEB_MAINT_PARAMS="\$@"
+export DEB_MAINT_PARAMS="\$*"
 
 test -d $debhookdir/$script.d && run-parts --arg="$version" $debhookdir/$script.d
 exit 0
diff --git a/scripts/pnmtologo.c b/scripts/pnmtologo.c
index 64f5ddb09ea..5c113123ed9 100644
--- a/scripts/pnmtologo.c
+++ b/scripts/pnmtologo.c
@@ -237,7 +237,7 @@ static void write_header(void)
     fprintf(out, " *  Linux logo %s\n", logoname);
     fputs(" */\n\n", out);
     fputs("#include <linux/linux_logo.h>\n\n", out);
-    fprintf(out, "static const unsigned char %s_data[] __initconst = {\n",
+    fprintf(out, "static unsigned char %s_data[] __initdata = {\n",
 	    logoname);
 }
 
@@ -374,7 +374,7 @@ static void write_logo_clut224(void)
     fputs("\n};\n\n", out);
 
     /* write logo clut */
-    fprintf(out, "static const unsigned char %s_clut[] __initconst = {\n",
+    fprintf(out, "static unsigned char %s_clut[] __initdata = {\n",
 	    logoname);
     write_hex_cnt = 0;
     for (i = 0; i < logo_clutsize; i++) {
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 7109e2b5bc0..911ba7ffab8 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -393,7 +393,7 @@ while (<IN>) {
 	    $read_function = 0;
 	}
 	# print out any recorded offsets
-	update_funcs() if ($text_found);
+	update_funcs() if (defined($ref_func));
 
 	# reset all markers and arrays
 	$text_found = 0;
@@ -403,7 +403,6 @@ while (<IN>) {
     # section found, now is this a start of a function?
     } elsif ($read_function && /$function_regex/) {
 	$text_found = 1;
-	$offset = hex $1;
 	$text = $2;
 
 	# if this is either a local function or a weak function
@@ -412,10 +411,15 @@ while (<IN>) {
 	if (!defined($locals{$text}) && !defined($weak{$text})) {
 	    $ref_func = $text;
 	    $read_function = 0;
+	    $offset = hex $1;
 	} else {
 	    # if we already have a function, and this is weak, skip it
-	    if (!defined($ref_func) || !defined($weak{$text})) {
+	    if (!defined($ref_func) && !defined($weak{$text}) &&
+		 # PPC64 can have symbols that start with .L and
+		 # gcc considers these special. Don't use them!
+		 $text !~ /^\.L/) {
 		$ref_func = $text;
+		$offset = hex $1;
 	    }
 	}
     } elsif ($read_headers && /$mcount_section/) {
@@ -440,7 +444,7 @@ while (<IN>) {
 }
 
 # dump out anymore offsets that may have been found
-update_funcs() if ($text_found);
+update_funcs() if (defined($ref_func));
 
 # If we did not find any mcount callers, we are done (do nothing).
 if (!$opened) {
diff --git a/security/Kconfig b/security/Kconfig
index d23c839038f..4c865345caa 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -113,6 +113,22 @@ config SECURITY_ROOTPLUG
 
 	  If you are unsure how to answer this question, answer N.
 
+config LSM_MMAP_MIN_ADDR
+	int "Low address space for LSM to protect from user allocation"
+	depends on SECURITY && SECURITY_SELINUX
+	default 65536
+	help
+	  This is the portion of low virtual memory which should be protected
+	  from userspace allocation.  Keeping a user from writing to low pages
+	  can help reduce the impact of kernel NULL pointer bugs.
+
+	  For most ia64, ppc64 and x86 users with lots of address space
+	  a value of 65536 is reasonable and should cause no problems.
+	  On arm and other archs it should not be higher than 32768.
+	  Programs which use vm86 functionality or have some need to map
+	  this low address space will need the permission specific to the
+	  systems running LSM.
+
 source security/selinux/Kconfig
 source security/smack/Kconfig
 source security/tomoyo/Kconfig
diff --git a/security/Makefile b/security/Makefile
index c67557cdaa8..b56e7f9ecbc 100644
--- a/security/Makefile
+++ b/security/Makefile
@@ -8,7 +8,7 @@ subdir-$(CONFIG_SECURITY_SMACK)		+= smack
 subdir-$(CONFIG_SECURITY_TOMOYO)        += tomoyo
 
 # always enable default capabilities
-obj-y		+= commoncap.o
+obj-y		+= commoncap.o min_addr.o
 
 # Object file lists
 obj-$(CONFIG_SECURITY)			+= security.o capability.o
diff --git a/security/capability.c b/security/capability.c
index 21b6cead6a8..88f752e8152 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -330,15 +330,6 @@ static int cap_file_ioctl(struct file *file, unsigned int command,
 	return 0;
 }
 
-static int cap_file_mmap(struct file *file, unsigned long reqprot,
-			 unsigned long prot, unsigned long flags,
-			 unsigned long addr, unsigned long addr_only)
-{
-	if ((addr < mmap_min_addr) && !capable(CAP_SYS_RAWIO))
-		return -EACCES;
-	return 0;
-}
-
 static int cap_file_mprotect(struct vm_area_struct *vma, unsigned long reqprot,
 			     unsigned long prot)
 {
diff --git a/security/commoncap.c b/security/commoncap.c
index 48b7e0228fa..e3097c0a131 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -984,3 +984,33 @@ int cap_vm_enough_memory(struct mm_struct *mm, long pages)
 		cap_sys_admin = 1;
 	return __vm_enough_memory(mm, pages, cap_sys_admin);
 }
+
+/*
+ * cap_file_mmap - check if able to map given addr
+ * @file: unused
+ * @reqprot: unused
+ * @prot: unused
+ * @flags: unused
+ * @addr: address attempting to be mapped
+ * @addr_only: unused
+ *
+ * If the process is attempting to map memory below mmap_min_addr they need
+ * CAP_SYS_RAWIO.  The other parameters to this function are unused by the
+ * capability security module.  Returns 0 if this mapping should be allowed
+ * -EPERM if not.
+ */
+int cap_file_mmap(struct file *file, unsigned long reqprot,
+		  unsigned long prot, unsigned long flags,
+		  unsigned long addr, unsigned long addr_only)
+{
+	int ret = 0;
+
+	if (addr < dac_mmap_min_addr) {
+		ret = cap_capable(current, current_cred(), CAP_SYS_RAWIO,
+				  SECURITY_CAP_AUDIT);
+		/* set PF_SUPERPRIV if it turns out we allow the low mmap */
+		if (ret == 0)
+			current->flags |= PF_SUPERPRIV;
+	}
+	return ret;
+}
diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c
index 63003a63aae..46642a19bc7 100644
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -45,9 +45,9 @@ int ima_calc_hash(struct file *file, char *digest)
 {
 	struct hash_desc desc;
 	struct scatterlist sg[1];
-	loff_t i_size;
+	loff_t i_size, offset = 0;
 	char *rbuf;
-	int rc, offset = 0;
+	int rc;
 
 	rc = init_desc(&desc);
 	if (rc != 0)
@@ -67,6 +67,8 @@ int ima_calc_hash(struct file *file, char *digest)
 			rc = rbuf_len;
 			break;
 		}
+		if (rbuf_len == 0)
+			break;
 		offset += rbuf_len;
 		sg_init_one(sg, rbuf, rbuf_len);
 
diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index 6f611874d10..b85e61bcf24 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -238,7 +238,40 @@ out:
 }
 
 /*
- * ima_opens_get - increment file counts
+ * ima_counts_put - decrement file counts
+ *
+ * File counts are incremented in ima_path_check. On file open
+ * error, such as ETXTBSY, decrement the counts to prevent
+ * unnecessary imbalance messages.
+ */
+void ima_counts_put(struct path *path, int mask)
+{
+	struct inode *inode = path->dentry->d_inode;
+	struct ima_iint_cache *iint;
+
+	/* The inode may already have been freed, freeing the iint
+	 * with it. Verify the inode is not NULL before dereferencing
+	 * it.
+	 */
+	if (!ima_initialized || !inode || !S_ISREG(inode->i_mode))
+		return;
+	iint = ima_iint_find_insert_get(inode);
+	if (!iint)
+		return;
+
+	mutex_lock(&iint->mutex);
+	iint->opencount--;
+	if ((mask & MAY_WRITE) || (mask == 0))
+		iint->writecount--;
+	else if (mask & (MAY_READ | MAY_EXEC))
+		iint->readcount--;
+	mutex_unlock(&iint->mutex);
+
+	kref_put(&iint->refcount, iint_free);
+}
+
+/*
+ * ima_counts_get - increment file counts
  *
  * - for IPC shm and shmat file.
  * - for nfsd exported files.
@@ -264,6 +297,8 @@ void ima_counts_get(struct file *file)
 	if (file->f_mode & FMODE_WRITE)
 		iint->writecount++;
 	mutex_unlock(&iint->mutex);
+
+	kref_put(&iint->refcount, iint_free);
 }
 EXPORT_SYMBOL_GPL(ima_counts_get);
 
diff --git a/security/integrity/ima/ima_queue.c b/security/integrity/ima/ima_queue.c
index 7ec94314ac0..a0880e9c8e0 100644
--- a/security/integrity/ima/ima_queue.c
+++ b/security/integrity/ima/ima_queue.c
@@ -134,7 +134,8 @@ int ima_add_template_entry(struct ima_template_entry *entry, int violation,
 	}
 out:
 	mutex_unlock(&ima_extend_list_mutex);
-	integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, entry->template_name,
+	integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode,
+			    entry->template.file_name,
 			    op, audit_cause, result, audit_info);
 	return result;
 }
diff --git a/security/min_addr.c b/security/min_addr.c
new file mode 100644
index 00000000000..14cc7b3b8d0
--- /dev/null
+++ b/security/min_addr.c
@@ -0,0 +1,49 @@
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/security.h>
+#include <linux/sysctl.h>
+
+/* amount of vm to protect from userspace access by both DAC and the LSM*/
+unsigned long mmap_min_addr;
+/* amount of vm to protect from userspace using CAP_SYS_RAWIO (DAC) */
+unsigned long dac_mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
+/* amount of vm to protect from userspace using the LSM = CONFIG_LSM_MMAP_MIN_ADDR */
+
+/*
+ * Update mmap_min_addr = max(dac_mmap_min_addr, CONFIG_LSM_MMAP_MIN_ADDR)
+ */
+static void update_mmap_min_addr(void)
+{
+#ifdef CONFIG_LSM_MMAP_MIN_ADDR
+	if (dac_mmap_min_addr > CONFIG_LSM_MMAP_MIN_ADDR)
+		mmap_min_addr = dac_mmap_min_addr;
+	else
+		mmap_min_addr = CONFIG_LSM_MMAP_MIN_ADDR;
+#else
+	mmap_min_addr = dac_mmap_min_addr;
+#endif
+}
+
+/*
+ * sysctl handler which just sets dac_mmap_min_addr = the new value and then
+ * calls update_mmap_min_addr() so non MAP_FIXED hints get rounded properly
+ */
+int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp,
+			  void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+	int ret;
+
+	ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos);
+
+	update_mmap_min_addr();
+
+	return ret;
+}
+
+int __init init_mmap_min_addr(void)
+{
+	update_mmap_min_addr();
+
+	return 0;
+}
+pure_initcall(init_mmap_min_addr);
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 15c2a08a66f..8d8b69c5664 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1285,6 +1285,8 @@ static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dent
 		rc = inode->i_op->getxattr(dentry, XATTR_NAME_SELINUX,
 					   context, len);
 		if (rc == -ERANGE) {
+			kfree(context);
+
 			/* Need a larger buffer.  Query for the right size. */
 			rc = inode->i_op->getxattr(dentry, XATTR_NAME_SELINUX,
 						   NULL, 0);
@@ -1292,7 +1294,6 @@ static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dent
 				dput(dentry);
 				goto out_unlock;
 			}
-			kfree(context);
 			len = rc;
 			context = kmalloc(len+1, GFP_NOFS);
 			if (!context) {
@@ -3029,9 +3030,21 @@ static int selinux_file_mmap(struct file *file, unsigned long reqprot,
 	int rc = 0;
 	u32 sid = current_sid();
 
-	if (addr < mmap_min_addr)
+	/*
+	 * notice that we are intentionally putting the SELinux check before
+	 * the secondary cap_file_mmap check.  This is such a likely attempt
+	 * at bad behaviour/exploit that we always want to get the AVC, even
+	 * if DAC would have also denied the operation.
+	 */
+	if (addr < CONFIG_LSM_MMAP_MIN_ADDR) {
 		rc = avc_has_perm(sid, sid, SECCLASS_MEMPROTECT,
 				  MEMPROTECT__MMAP_ZERO, NULL);
+		if (rc)
+			return rc;
+	}
+
+	/* do DAC check on address space usage */
+	rc = cap_file_mmap(file, reqprot, prot, flags, addr, addr_only);
 	if (rc || addr_only)
 		return rc;
 
diff --git a/sound/aoa/core/gpio-pmf.c b/sound/aoa/core/gpio-pmf.c
index 5ca2220eac7..1dd0c28d1fb 100644
--- a/sound/aoa/core/gpio-pmf.c
+++ b/sound/aoa/core/gpio-pmf.c
@@ -182,6 +182,10 @@ static int pmf_set_notify(struct gpio_runtime *rt,
 	if (!old && notify) {
 		irq_client = kzalloc(sizeof(struct pmf_irq_client),
 				     GFP_KERNEL);
+		if (!irq_client) {
+			err = -ENOMEM;
+			goto out_unlock;
+		}
 		irq_client->data = notif;
 		irq_client->handler = pmf_handle_notify_irq;
 		irq_client->owner = THIS_MODULE;
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 333e4dd2945..9db60d831bb 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -233,6 +233,18 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 		xrun(substream);
 		return -EPIPE;
 	}
+	if (xrun_debug(substream, 8)) {
+		char name[16];
+		pcm_debug_name(substream, name, sizeof(name));
+		snd_printd("period_update: %s: pos=0x%x/0x%x/0x%x, "
+			   "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n",
+			   name, (unsigned int)pos,
+			   (unsigned int)runtime->period_size,
+			   (unsigned int)runtime->buffer_size,
+			   (unsigned long)old_hw_ptr,
+			   (unsigned long)runtime->hw_ptr_base,
+			   (unsigned long)runtime->hw_ptr_interrupt);
+	}
 	hw_base = runtime->hw_ptr_base;
 	new_hw_ptr = hw_base + pos;
 	hw_ptr_interrupt = runtime->hw_ptr_interrupt + runtime->period_size;
@@ -244,18 +256,27 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 			delta = new_hw_ptr - hw_ptr_interrupt;
 	}
 	if (delta < 0) {
-		delta += runtime->buffer_size;
+		if (runtime->periods == 1 || new_hw_ptr < old_hw_ptr)
+			delta += runtime->buffer_size;
 		if (delta < 0) {
 			hw_ptr_error(substream, 
 				     "Unexpected hw_pointer value "
 				     "(stream=%i, pos=%ld, intr_ptr=%ld)\n",
 				     substream->stream, (long)pos,
 				     (long)hw_ptr_interrupt);
+#if 1
+			/* simply skipping the hwptr update seems more
+			 * robust in some cases, e.g. on VMware with
+			 * inaccurate timer source
+			 */
+			return 0; /* skip this update */
+#else
 			/* rebase to interrupt position */
 			hw_base = new_hw_ptr = hw_ptr_interrupt;
 			/* align hw_base to buffer_size */
 			hw_base -= hw_base % runtime->buffer_size;
 			delta = 0;
+#endif
 		} else {
 			hw_base += runtime->buffer_size;
 			if (hw_base >= runtime->boundary)
@@ -344,6 +365,19 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
 		xrun(substream);
 		return -EPIPE;
 	}
+	if (xrun_debug(substream, 16)) {
+		char name[16];
+		pcm_debug_name(substream, name, sizeof(name));
+		snd_printd("hw_update: %s: pos=0x%x/0x%x/0x%x, "
+			   "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n",
+			   name, (unsigned int)pos,
+			   (unsigned int)runtime->period_size,
+			   (unsigned int)runtime->buffer_size,
+			   (unsigned long)old_hw_ptr,
+			   (unsigned long)runtime->hw_ptr_base,
+			   (unsigned long)runtime->hw_ptr_interrupt);
+	}
+
 	hw_base = runtime->hw_ptr_base;
 	new_hw_ptr = hw_base + pos;
 
@@ -909,47 +943,24 @@ static int snd_interval_ratden(struct snd_interval *i,
 int snd_interval_list(struct snd_interval *i, unsigned int count, unsigned int *list, unsigned int mask)
 {
         unsigned int k;
-	int changed = 0;
+	struct snd_interval list_range;
 
 	if (!count) {
 		i->empty = 1;
 		return -EINVAL;
 	}
+	snd_interval_any(&list_range);
+	list_range.min = UINT_MAX;
+	list_range.max = 0;
         for (k = 0; k < count; k++) {
 		if (mask && !(mask & (1 << k)))
 			continue;
-                if (i->min == list[k] && !i->openmin)
-                        goto _l1;
-                if (i->min < list[k]) {
-                        i->min = list[k];
-			i->openmin = 0;
-			changed = 1;
-                        goto _l1;
-                }
-        }
-        i->empty = 1;
-        return -EINVAL;
- _l1:
-        for (k = count; k-- > 0;) {
-		if (mask && !(mask & (1 << k)))
+		if (!snd_interval_test(i, list[k]))
 			continue;
-                if (i->max == list[k] && !i->openmax)
-                        goto _l2;
-                if (i->max > list[k]) {
-                        i->max = list[k];
-			i->openmax = 0;
-			changed = 1;
-                        goto _l2;
-                }
+		list_range.min = min(list_range.min, list[k]);
+		list_range.max = max(list_range.max, list[k]);
         }
-        i->empty = 1;
-        return -EINVAL;
- _l2:
-	if (snd_interval_checkempty(i)) {
-		i->empty = 1;
-		return -EINVAL;
-	}
-        return changed;
+	return snd_interval_refine(i, &list_range);
 }
 
 EXPORT_SYMBOL(snd_interval_list);
diff --git a/sound/core/seq/Makefile b/sound/core/seq/Makefile
index 1bcb360330e..941f64a853e 100644
--- a/sound/core/seq/Makefile
+++ b/sound/core/seq/Makefile
@@ -3,10 +3,6 @@
 # Copyright (c) 1999 by Jaroslav Kysela <perex@perex.cz>
 #
 
-ifeq ($(CONFIG_SND_SEQUENCER_OSS),y)
-  obj-$(CONFIG_SND_SEQUENCER) += oss/
-endif
-
 snd-seq-device-objs := seq_device.o
 snd-seq-objs := seq.o seq_lock.o seq_clientmgr.o seq_memory.o seq_queue.o \
                 seq_fifo.o seq_prioq.o seq_timer.o \
@@ -19,7 +15,8 @@ snd-seq-virmidi-objs := seq_virmidi.o
 
 obj-$(CONFIG_SND_SEQUENCER) += snd-seq.o snd-seq-device.o
 ifeq ($(CONFIG_SND_SEQUENCER_OSS),y)
-obj-$(CONFIG_SND_SEQUENCER) += snd-seq-midi-event.o
+  obj-$(CONFIG_SND_SEQUENCER) += snd-seq-midi-event.o
+  obj-$(CONFIG_SND_SEQUENCER) += oss/
 endif
 obj-$(CONFIG_SND_SEQ_DUMMY) += snd-seq-dummy.o
 
diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c
index de83608719e..3ee0269e5bd 100644
--- a/sound/isa/cmi8330.c
+++ b/sound/isa/cmi8330.c
@@ -338,7 +338,7 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard,
 		return -EBUSY;
 
 	acard->mpu = pnp_request_card_device(card, id->devs[2].id, NULL);
-	if (acard->play == NULL)
+	if (acard->mpu == NULL)
 		return -EBUSY;
 
 	pdev = acard->cap;
diff --git a/sound/isa/gus/gus_pcm.c b/sound/isa/gus/gus_pcm.c
index edb11eefdfe..2dcf45bf729 100644
--- a/sound/isa/gus/gus_pcm.c
+++ b/sound/isa/gus/gus_pcm.c
@@ -795,13 +795,13 @@ static int snd_gf1_pcm_volume_put(struct snd_kcontrol *kcontrol, struct snd_ctl_
 		if (!(pcmp->flags & SNDRV_GF1_PCM_PFLG_ACTIVE))
 			continue;
 		/* load real volume - better precision */
-		spin_lock_irqsave(&gus->reg_lock, flags);
+		spin_lock(&gus->reg_lock);
 		snd_gf1_select_voice(gus, pvoice->number);
 		snd_gf1_ctrl_stop(gus, SNDRV_GF1_VB_VOLUME_CONTROL);
 		vol = pvoice == pcmp->pvoices[0] ? gus->gf1.pcm_volume_level_left : gus->gf1.pcm_volume_level_right;
 		snd_gf1_write16(gus, SNDRV_GF1_VW_VOLUME, vol);
 		pcmp->final_volume = 1;
-		spin_unlock_irqrestore(&gus->reg_lock, flags);
+		spin_unlock(&gus->reg_lock);
 	}
 	spin_unlock_irqrestore(&gus->voice_alloc, flags);
 	return change;
diff --git a/sound/oss/aedsp16.c b/sound/oss/aedsp16.c
index 3ee9900ffd7..35b5912cf3f 100644
--- a/sound/oss/aedsp16.c
+++ b/sound/oss/aedsp16.c
@@ -325,8 +325,9 @@
 /*
  * Size of character arrays that store name and version of sound card
  */
-#define CARDNAMELEN 15		/* Size of the card's name in chars     */
-#define CARDVERLEN  2		/* Size of the card's version in chars  */
+#define CARDNAMELEN	15	/* Size of the card's name in chars     */
+#define CARDVERLEN	10	/* Size of the card's version in chars	*/
+#define CARDVERDIGITS	2	/* Number of digits in the version	*/
 
 #if defined(CONFIG_SC6600)
 /*
@@ -410,7 +411,7 @@
 
 static int      soft_cfg __initdata = 0;	/* bitmapped config */
 static int      soft_cfg_mss __initdata = 0;	/* bitmapped mss config */
-static int      ver[CARDVERLEN] __initdata = {0, 0};	/* DSP Ver:
+static int      ver[CARDVERDIGITS] __initdata = {0, 0};	/* DSP Ver:
 						   hi->ver[0] lo->ver[1] */
 
 #if defined(CONFIG_SC6600)
@@ -957,7 +958,7 @@ static int __init aedsp16_dsp_version(int port)
 	 * string is finished.
 	 */
 		ver[len++] = ret;
-	  } while (len < CARDVERLEN);
+	  } while (len < CARDVERDIGITS);
 	sprintf(DSPVersion, "%d.%d", ver[0], ver[1]);
 
 	DBG(("success.\n"));
diff --git a/sound/oss/kahlua.c b/sound/oss/kahlua.c
index c180598f171..89466b056be 100644
--- a/sound/oss/kahlua.c
+++ b/sound/oss/kahlua.c
@@ -199,7 +199,7 @@ MODULE_LICENSE("GPL");
  */
 
 static struct pci_device_id id_tbl[] = {
-	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO), 0 },
 	{ }
 };
 
diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c
index 6c0a770ed05..734b8f9e2f7 100644
--- a/sound/oss/mpu401.c
+++ b/sound/oss/mpu401.c
@@ -926,31 +926,21 @@ static struct midi_operations mpu401_midi_operations[MAX_MIDI_DEV];
 static void mpu401_chk_version(int n, struct mpu_config *devc)
 {
 	int tmp;
-	unsigned long flags;
 
 	devc->version = devc->revision = 0;
 
-	spin_lock_irqsave(&devc->lock,flags);
-	if ((tmp = mpu_cmd(n, 0xAC, 0)) < 0)
-	{
-		spin_unlock_irqrestore(&devc->lock,flags);
+	tmp = mpu_cmd(n, 0xAC, 0);
+	if (tmp < 0)
 		return;
-	}
 	if ((tmp & 0xf0) > 0x20)	/* Why it's larger than 2.x ??? */
-	{
-		spin_unlock_irqrestore(&devc->lock,flags);
 		return;
-	}
 	devc->version = tmp;
 
-	if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0)
-	{
+	if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0) {
 		devc->version = 0;
-		spin_unlock_irqrestore(&devc->lock,flags);
 		return;
 	}
 	devc->revision = tmp;
-	spin_unlock_irqrestore(&devc->lock,flags);
 }
 
 int attach_mpu401(struct address_info *hw_config, struct module *owner)
@@ -1084,7 +1074,7 @@ int attach_mpu401(struct address_info *hw_config, struct module *owner)
 			sprintf(mpu_synth_info[m].name, "%s (MPU401)", hw_config->name);
 		else
 			sprintf(mpu_synth_info[m].name,
-				"MPU-401 %d.%d%c Midi interface #%d",
+				"MPU-401 %d.%d%c MIDI #%d",
 				(int) (devc->version & 0xf0) >> 4,
 				devc->version & 0x0f,
 				revision_char,
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index c551006e292..76d76c08339 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -310,12 +310,16 @@ static int snd_ali_codec_ready(struct snd_ali *codec,
 	unsigned int res;
 	
 	end_time = jiffies + msecs_to_jiffies(250);
-	do {
+
+	for (;;) {
 		res = snd_ali_5451_peek(codec,port);
 		if (!(res & 0x8000))
 			return 0;
+		if (!time_after_eq(end_time, jiffies))
+			break;
 		schedule_timeout_uninterruptible(1);
-	} while (time_after_eq(end_time, jiffies));
+	}
+
 	snd_ali_5451_poke(codec, port, res & ~0x8000);
 	snd_printdd("ali_codec_ready: codec is not ready.\n ");
 	return -EIO;
@@ -327,15 +331,17 @@ static int snd_ali_stimer_ready(struct snd_ali *codec)
 	unsigned long dwChk1,dwChk2;
 	
 	dwChk1 = snd_ali_5451_peek(codec, ALI_STIMER);
-	dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER);
-
 	end_time = jiffies + msecs_to_jiffies(250);
-	do {
+
+	for (;;) {
 		dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER);
 		if (dwChk2 != dwChk1)
 			return 0;
+		if (!time_after_eq(end_time, jiffies))
+			break;
 		schedule_timeout_uninterruptible(1);
-	} while (time_after_eq(end_time, jiffies));
+	}
+
 	snd_printk(KERN_ERR "ali_stimer_read: stimer is not ready.\n");
 	return -EIO;
 }
diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c
index 71515ddb459..d6752dff2a4 100644
--- a/sound/pci/atiixp.c
+++ b/sound/pci/atiixp.c
@@ -287,10 +287,10 @@ struct atiixp {
 /*
  */
 static struct pci_device_id snd_atiixp_ids[] = {
-	{ 0x1002, 0x4341, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
-	{ 0x1002, 0x4361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB300 */
-	{ 0x1002, 0x4370, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
-	{ 0x1002, 0x4382, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB600 */
+	{ PCI_VDEVICE(ATI, 0x4341), 0 }, /* SB200 */
+	{ PCI_VDEVICE(ATI, 0x4361), 0 }, /* SB300 */
+	{ PCI_VDEVICE(ATI, 0x4370), 0 }, /* SB400 */
+	{ PCI_VDEVICE(ATI, 0x4382), 0 }, /* SB600 */
 	{ 0, }
 };
 
diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c
index c3136cccc55..e7e147bf8eb 100644
--- a/sound/pci/atiixp_modem.c
+++ b/sound/pci/atiixp_modem.c
@@ -262,8 +262,8 @@ struct atiixp_modem {
 /*
  */
 static struct pci_device_id snd_atiixp_ids[] = {
-	{ 0x1002, 0x434d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
-	{ 0x1002, 0x4378, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
+	{ PCI_VDEVICE(ATI, 0x434d), 0 }, /* SB200 */
+	{ PCI_VDEVICE(ATI, 0x4378), 0 }, /* SB400 */
 	{ 0, }
 };
 
diff --git a/sound/pci/au88x0/au8810.c b/sound/pci/au88x0/au8810.c
index fce22c7af0e..c0e8c6b295c 100644
--- a/sound/pci/au88x0/au8810.c
+++ b/sound/pci/au88x0/au8810.c
@@ -1,8 +1,7 @@
 #include "au8810.h"
 #include "au88x0.h"
 static struct pci_device_id snd_vortex_ids[] = {
-	{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1,},
+	{PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE), 1,},
 	{0,}
 };
 
diff --git a/sound/pci/au88x0/au8820.c b/sound/pci/au88x0/au8820.c
index d1fbcce0725..a6527330df5 100644
--- a/sound/pci/au88x0/au8820.c
+++ b/sound/pci/au88x0/au8820.c
@@ -1,8 +1,7 @@
 #include "au8820.h"
 #include "au88x0.h"
 static struct pci_device_id snd_vortex_ids[] = {
-	{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+	{PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1), 0,},
 	{0,}
 };
 
diff --git a/sound/pci/au88x0/au8830.c b/sound/pci/au88x0/au8830.c
index d4f2717c14f..6c702ad4352 100644
--- a/sound/pci/au88x0/au8830.c
+++ b/sound/pci/au88x0/au8830.c
@@ -1,8 +1,7 @@
 #include "au8830.h"
 #include "au88x0.h"
 static struct pci_device_id snd_vortex_ids[] = {
-	{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+	{PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2), 0,},
 	{0,}
 };
 
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 57b992a5c05..15e4138bce1 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -325,9 +325,9 @@ static struct snd_pcm_hardware snd_ca0106_capture_hw = {
 	.rate_max =		192000,
 	.channels_min =		2,
 	.channels_max =		2,
-	.buffer_bytes_max =	((65536 - 64) * 8),
+	.buffer_bytes_max =	65536 - 128,
 	.period_bytes_min =	64,
-	.period_bytes_max =	(65536 - 64),
+	.period_bytes_max =	32768 - 64,
 	.periods_min =		2,
 	.periods_max =		2,
 	.fifo_size =		0,
@@ -1876,7 +1876,7 @@ static int snd_ca0106_resume(struct pci_dev *pci)
 
 // PCI IDs
 static struct pci_device_id snd_ca0106_ids[] = {
-	{ 0x1102, 0x0007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },	/* Audigy LS or Live 24bit */
+	{ PCI_VDEVICE(CREATIVE, 0x0007), 0 },	/* Audigy LS or Live 24bit */
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, snd_ca0106_ids);
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index 449fe02f666..ddcd4a9fd7e 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -2797,11 +2797,11 @@ static inline void snd_cmipci_proc_init(struct cmipci *cm) {}
 
 
 static struct pci_device_id snd_cmipci_ids[] = {
-	{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_AL, PCI_DEVICE_ID_CMEDIA_CM8738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A), 0},
+	{PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B), 0},
+	{PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738), 0},
+	{PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738B), 0},
+	{PCI_VDEVICE(AL, PCI_DEVICE_ID_CMEDIA_CM8738), 0},
 	{0,},
 };
 
diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c
index f6286f84a22..e2e0359bb05 100644
--- a/sound/pci/cs4281.c
+++ b/sound/pci/cs4281.c
@@ -495,7 +495,7 @@ struct cs4281 {
 static irqreturn_t snd_cs4281_interrupt(int irq, void *dev_id);
 
 static struct pci_device_id snd_cs4281_ids[] = {
-	{ 0x1013, 0x6005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },	/* CS4281 */
+	{ PCI_VDEVICE(CIRRUS, 0x6005), 0, },	/* CS4281 */
 	{ 0, }
 };
 
diff --git a/sound/pci/cs46xx/cs46xx.c b/sound/pci/cs46xx/cs46xx.c
index c9b3e3d48cb..033aec43011 100644
--- a/sound/pci/cs46xx/cs46xx.c
+++ b/sound/pci/cs46xx/cs46xx.c
@@ -65,9 +65,9 @@ module_param_array(mmap_valid, bool, NULL, 0444);
 MODULE_PARM_DESC(mmap_valid, "Support OSS mmap.");
 
 static struct pci_device_id snd_cs46xx_ids[] = {
-        { 0x1013, 0x6001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4280 */
-        { 0x1013, 0x6003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4612 */
-        { 0x1013, 0x6004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4615 */
+	{ PCI_VDEVICE(CIRRUS, 0x6001), 0, },   /* CS4280 */
+	{ PCI_VDEVICE(CIRRUS, 0x6003), 0, },   /* CS4612 */
+	{ PCI_VDEVICE(CIRRUS, 0x6004), 0, },   /* CS4615 */
 	{ 0, }
 };
 
diff --git a/sound/pci/ctxfi/ctamixer.c b/sound/pci/ctxfi/ctamixer.c
index a1db51b3ead..a7f4a671f7b 100644
--- a/sound/pci/ctxfi/ctamixer.c
+++ b/sound/pci/ctxfi/ctamixer.c
@@ -242,13 +242,12 @@ static int get_amixer_rsc(struct amixer_mgr *mgr,
 
 	/* Allocate mem for amixer resource */
 	amixer = kzalloc(sizeof(*amixer), GFP_KERNEL);
-	if (NULL == amixer) {
-		err = -ENOMEM;
-		return err;
-	}
+	if (!amixer)
+		return -ENOMEM;
 
 	/* Check whether there are sufficient
 	 * amixer resources to meet request. */
+	err = 0;
 	spin_lock_irqsave(&mgr->mgr_lock, flags);
 	for (i = 0; i < desc->msr; i++) {
 		err = mgr_get_resource(&mgr->mgr, 1, &idx);
@@ -397,12 +396,11 @@ static int get_sum_rsc(struct sum_mgr *mgr,
 
 	/* Allocate mem for sum resource */
 	sum = kzalloc(sizeof(*sum), GFP_KERNEL);
-	if (NULL == sum) {
-		err = -ENOMEM;
-		return err;
-	}
+	if (!sum)
+		return -ENOMEM;
 
 	/* Check whether there are sufficient sum resources to meet request. */
+	err = 0;
 	spin_lock_irqsave(&mgr->mgr_lock, flags);
 	for (i = 0; i < desc->msr; i++) {
 		err = mgr_get_resource(&mgr->mgr, 1, &idx);
diff --git a/sound/pci/ctxfi/ctdaio.c b/sound/pci/ctxfi/ctdaio.c
index 082e35c08c0..deb6cfa7360 100644
--- a/sound/pci/ctxfi/ctdaio.c
+++ b/sound/pci/ctxfi/ctdaio.c
@@ -57,9 +57,9 @@ struct daio_rsc_idx idx_20k1[NUM_DAIOTYP] = {
 
 struct daio_rsc_idx idx_20k2[NUM_DAIOTYP] = {
 	[LINEO1] = {.left = 0x40, .right = 0x41},
-	[LINEO2] = {.left = 0x70, .right = 0x71},
+	[LINEO2] = {.left = 0x60, .right = 0x61},
 	[LINEO3] = {.left = 0x50, .right = 0x51},
-	[LINEO4] = {.left = 0x60, .right = 0x61},
+	[LINEO4] = {.left = 0x70, .right = 0x71},
 	[LINEIM] = {.left = 0x45, .right = 0xc5},
 	[SPDIFOO] = {.left = 0x00, .right = 0x01},
 	[SPDIFIO] = {.left = 0x05, .right = 0x85},
diff --git a/sound/pci/ctxfi/ctsrc.c b/sound/pci/ctxfi/ctsrc.c
index e1c145d8b70..df43a5cd393 100644
--- a/sound/pci/ctxfi/ctsrc.c
+++ b/sound/pci/ctxfi/ctsrc.c
@@ -724,12 +724,11 @@ static int get_srcimp_rsc(struct srcimp_mgr *mgr,
 
 	/* Allocate mem for SRCIMP resource */
 	srcimp = kzalloc(sizeof(*srcimp), GFP_KERNEL);
-	if (NULL == srcimp) {
-		err = -ENOMEM;
-		return err;
-	}
+	if (!srcimp)
+		return -ENOMEM;
 
 	/* Check whether there are sufficient SRCIMP resources. */
+	err = 0;
 	spin_lock_irqsave(&mgr->mgr_lock, flags);
 	for (i = 0; i < desc->msr; i++) {
 		err = mgr_get_resource(&mgr->mgr, 1, &idx);
diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c
index c7f3b994101..168af67d938 100644
--- a/sound/pci/emu10k1/emu10k1.c
+++ b/sound/pci/emu10k1/emu10k1.c
@@ -77,9 +77,9 @@ MODULE_PARM_DESC(subsystem, "Force card subsystem model.");
  * Class 0401: 1102:0008 (rev 00) Subsystem: 1102:1001 -> Audigy2 Value  Model:SB0400
  */
 static struct pci_device_id snd_emu10k1_ids[] = {
-	{ 0x1102, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },	/* EMU10K1 */
-	{ 0x1102, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },	/* Audigy */
-	{ 0x1102, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },	/* Audigy 2 Value SB0400 */
+	{ PCI_VDEVICE(CREATIVE, 0x0002), 0 },	/* EMU10K1 */
+	{ PCI_VDEVICE(CREATIVE, 0x0004), 1 },	/* Audigy */
+	{ PCI_VDEVICE(CREATIVE, 0x0008), 1 },	/* Audigy 2 Value SB0400 */
 	{ 0, }
 };
 
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 4d3ad793e98..36e08bd2b3c 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -1607,7 +1607,7 @@ static void __devexit snd_emu10k1x_remove(struct pci_dev *pci)
 
 // PCI IDs
 static struct pci_device_id snd_emu10k1x_ids[] = {
-	{ 0x1102, 0x0006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },	/* Dell OEM version (EMU10K1) */
+	{ PCI_VDEVICE(CREATIVE, 0x0006), 0 },	/* Dell OEM version (EMU10K1) */
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, snd_emu10k1x_ids);
diff --git a/sound/pci/emu10k1/p16v.c b/sound/pci/emu10k1/p16v.c
index e617acaf10e..61b8ab39800 100644
--- a/sound/pci/emu10k1/p16v.c
+++ b/sound/pci/emu10k1/p16v.c
@@ -644,7 +644,7 @@ int __devinit snd_p16v_pcm(struct snd_emu10k1 *emu, int device, struct snd_pcm *
 	int err;
         int capture=1;
   
-	/* snd_printk("KERN_DEBUG snd_p16v_pcm called. device=%d\n", device); */
+	/* snd_printk(KERN_DEBUG "snd_p16v_pcm called. device=%d\n", device); */
 	emu->p16v_device_offset = device;
 	if (rpcm)
 		*rpcm = NULL;
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index 18f4d1e98c4..2b82c5c723e 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -445,12 +445,12 @@ static irqreturn_t snd_audiopci_interrupt(int irq, void *dev_id);
 
 static struct pci_device_id snd_audiopci_ids[] = {
 #ifdef CHIP1370
-	{ 0x1274, 0x5000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },	/* ES1370 */
+	{ PCI_VDEVICE(ENSONIQ, 0x5000), 0, },	/* ES1370 */
 #endif
 #ifdef CHIP1371
-	{ 0x1274, 0x1371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },	/* ES1371 */
-	{ 0x1274, 0x5880, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },	/* ES1373 - CT5880 */
-	{ 0x1102, 0x8938, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },	/* Ectiva EV1938 */
+	{ PCI_VDEVICE(ENSONIQ, 0x1371), 0, },	/* ES1371 */
+	{ PCI_VDEVICE(ENSONIQ, 0x5880), 0, },	/* ES1373 - CT5880 */
+	{ PCI_VDEVICE(ECTIVA, 0x8938), 0, },	/* Ectiva EV1938 */
 #endif
 	{ 0, }
 };
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c
index fbd2ac09aa3..820318ee62c 100644
--- a/sound/pci/es1938.c
+++ b/sound/pci/es1938.c
@@ -244,7 +244,7 @@ struct es1938 {
 static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id);
 
 static struct pci_device_id snd_es1938_ids[] = {
-        { 0x125d, 0x1969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* Solo-1 */
+	{ PCI_VDEVICE(ESS, 0x1969), 0, },   /* Solo-1 */
 	{ 0, }
 };
 
diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c
index 29272f2e95a..b0275a05087 100644
--- a/sound/pci/hda/hda_beep.c
+++ b/sound/pci/hda/hda_beep.c
@@ -50,19 +50,22 @@ static void snd_hda_generate_beep(struct work_struct *work)
  * The tone frequency of beep generator on IDT/STAC codecs is
  * defined from the 8bit tone parameter, in Hz,
  *    freq = 48000 * (257 - tone) / 1024
- * that is from 12kHz to 93.75kHz in step of 46.875 hz
+ * that is from 12kHz to 93.75Hz in steps of 46.875 Hz
  */
 static int beep_linear_tone(struct hda_beep *beep, int hz)
 {
+	if (hz <= 0)
+		return 0;
 	hz *= 1000; /* fixed point */
-	hz = hz - DIGBEEP_HZ_MIN;
+	hz = hz - DIGBEEP_HZ_MIN
+		+ DIGBEEP_HZ_STEP / 2; /* round to nearest step */
 	if (hz < 0)
 		hz = 0; /* turn off PC beep*/
 	else if (hz >= (DIGBEEP_HZ_MAX - DIGBEEP_HZ_MIN))
-		hz = 0xff;
+		hz = 1; /* max frequency */
 	else {
 		hz /= DIGBEEP_HZ_STEP;
-		hz++;
+		hz = 255 - hz;
 	}
 	return hz;
 }
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 462e2cedaa6..c7df01b72ca 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -174,7 +174,7 @@ static int codec_exec_verb(struct hda_codec *codec, unsigned int cmd,
 	mutex_lock(&bus->cmd_mutex);
 	err = bus->ops.command(bus, cmd);
 	if (!err && res)
-		*res = bus->ops.get_response(bus);
+		*res = bus->ops.get_response(bus, codec->addr);
 	mutex_unlock(&bus->cmd_mutex);
 	snd_hda_power_down(codec);
 	if (res && *res == -1 && bus->rirb_error) {
@@ -332,6 +332,12 @@ int snd_hda_get_connections(struct hda_codec *codec, hda_nid_t nid,
 						  AC_VERB_GET_CONNECT_LIST, i);
 		range_val = !!(parm & (1 << (shift-1))); /* ranges */
 		val = parm & mask;
+		if (val == 0) {
+			snd_printk(KERN_WARNING "hda_codec: "
+				   "invalid CONNECT_LIST verb %x[%i]:%x\n",
+				    nid, i, parm);
+			return 0;
+		}
 		parm >>= shift;
 		if (range_val) {
 			/* ranges between the previous and this one */
@@ -3470,10 +3476,16 @@ int snd_hda_multi_out_analog_open(struct hda_codec *codec,
 		}
 		mutex_lock(&codec->spdif_mutex);
 		if (mout->share_spdif) {
-			runtime->hw.rates &= mout->spdif_rates;
-			runtime->hw.formats &= mout->spdif_formats;
-			if (mout->spdif_maxbps < hinfo->maxbps)
-				hinfo->maxbps = mout->spdif_maxbps;
+			if ((runtime->hw.rates & mout->spdif_rates) &&
+			    (runtime->hw.formats & mout->spdif_formats)) {
+				runtime->hw.rates &= mout->spdif_rates;
+				runtime->hw.formats &= mout->spdif_formats;
+				if (mout->spdif_maxbps < hinfo->maxbps)
+					hinfo->maxbps = mout->spdif_maxbps;
+			} else {
+				mout->share_spdif = 0;
+				/* FIXME: need notify? */
+			}
 		}
 		mutex_unlock(&codec->spdif_mutex);
 	}
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index cad79efaabc..1b75f28ed09 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -568,7 +568,7 @@ struct hda_bus_ops {
 	/* send a single command */
 	int (*command)(struct hda_bus *bus, unsigned int cmd);
 	/* get a response from the last command */
-	unsigned int (*get_response)(struct hda_bus *bus);
+	unsigned int (*get_response)(struct hda_bus *bus, unsigned int addr);
 	/* free the private data */
 	void (*private_free)(struct hda_bus *);
 	/* attach a PCM stream */
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index fcad5ec3177..9446a5abea1 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -508,7 +508,7 @@ static void hdmi_write_eld_info(struct snd_info_entry *entry,
 	char name[64];
 	char *sname;
 	long long val;
-	int n;
+	unsigned int n;
 
 	while (!snd_info_get_line(buffer, line, sizeof(line))) {
 		if (sscanf(line, "%s %llx", name, &val) != 2)
@@ -539,7 +539,7 @@ static void hdmi_write_eld_info(struct snd_info_entry *entry,
 				sname++;
 				n = 10 * n + name[4] - '0';
 			}
-			if (n < 0 || n > 31) /* double the CEA limit */
+			if (n >= ELD_MAX_SAD)
 				continue;
 			if (!strcmp(sname, "_coding_type"))
 				e->sad[n].format = val;
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 4e9ea708027..175f07a381b 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -253,7 +253,7 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
 
 /* STATESTS int mask: S3,SD2,SD1,SD0 */
 #define AZX_MAX_CODECS		4
-#define STATESTS_INT_MASK	0x0f
+#define STATESTS_INT_MASK	((1 << AZX_MAX_CODECS) - 1)
 
 /* SD_CTL bits */
 #define SD_CTL_STREAM_RESET	0x01	/* stream reset bit */
@@ -361,8 +361,8 @@ struct azx_rb {
 	dma_addr_t addr;	/* physical address of CORB/RIRB buffer */
 	/* for RIRB */
 	unsigned short rp, wp;	/* read/write pointers */
-	int cmds;		/* number of pending requests */
-	u32 res;		/* last read value */
+	int cmds[AZX_MAX_CODECS];	/* number of pending requests */
+	u32 res[AZX_MAX_CODECS];	/* last read value */
 };
 
 struct azx {
@@ -418,7 +418,7 @@ struct azx {
 	unsigned int probing :1; /* codec probing phase */
 
 	/* for debugging */
-	unsigned int last_cmd;	/* last issued command (to sync) */
+	unsigned int last_cmd[AZX_MAX_CODECS];
 
 	/* for pending irqs */
 	struct work_struct irq_pending_work;
@@ -513,6 +513,7 @@ static int azx_alloc_cmd_io(struct azx *chip)
 
 static void azx_init_cmd_io(struct azx *chip)
 {
+	spin_lock_irq(&chip->reg_lock);
 	/* CORB set up */
 	chip->corb.addr = chip->rb.addr;
 	chip->corb.buf = (u32 *)chip->rb.area;
@@ -531,7 +532,8 @@ static void azx_init_cmd_io(struct azx *chip)
 	/* RIRB set up */
 	chip->rirb.addr = chip->rb.addr + 2048;
 	chip->rirb.buf = (u32 *)(chip->rb.area + 2048);
-	chip->rirb.wp = chip->rirb.rp = chip->rirb.cmds = 0;
+	chip->rirb.wp = chip->rirb.rp = 0;
+	memset(chip->rirb.cmds, 0, sizeof(chip->rirb.cmds));
 	azx_writel(chip, RIRBLBASE, (u32)chip->rirb.addr);
 	azx_writel(chip, RIRBUBASE, upper_32_bits(chip->rirb.addr));
 
@@ -543,30 +545,60 @@ static void azx_init_cmd_io(struct azx *chip)
 	azx_writew(chip, RINTCNT, 1);
 	/* enable rirb dma and response irq */
 	azx_writeb(chip, RIRBCTL, ICH6_RBCTL_DMA_EN | ICH6_RBCTL_IRQ_EN);
+	spin_unlock_irq(&chip->reg_lock);
 }
 
 static void azx_free_cmd_io(struct azx *chip)
 {
+	spin_lock_irq(&chip->reg_lock);
 	/* disable ringbuffer DMAs */
 	azx_writeb(chip, RIRBCTL, 0);
 	azx_writeb(chip, CORBCTL, 0);
+	spin_unlock_irq(&chip->reg_lock);
+}
+
+static unsigned int azx_command_addr(u32 cmd)
+{
+	unsigned int addr = cmd >> 28;
+
+	if (addr >= AZX_MAX_CODECS) {
+		snd_BUG();
+		addr = 0;
+	}
+
+	return addr;
+}
+
+static unsigned int azx_response_addr(u32 res)
+{
+	unsigned int addr = res & 0xf;
+
+	if (addr >= AZX_MAX_CODECS) {
+		snd_BUG();
+		addr = 0;
+	}
+
+	return addr;
 }
 
 /* send a command */
 static int azx_corb_send_cmd(struct hda_bus *bus, u32 val)
 {
 	struct azx *chip = bus->private_data;
+	unsigned int addr = azx_command_addr(val);
 	unsigned int wp;
 
+	spin_lock_irq(&chip->reg_lock);
+
 	/* add command to corb */
 	wp = azx_readb(chip, CORBWP);
 	wp++;
 	wp %= ICH6_MAX_CORB_ENTRIES;
 
-	spin_lock_irq(&chip->reg_lock);
-	chip->rirb.cmds++;
+	chip->rirb.cmds[addr]++;
 	chip->corb.buf[wp] = cpu_to_le32(val);
 	azx_writel(chip, CORBWP, wp);
+
 	spin_unlock_irq(&chip->reg_lock);
 
 	return 0;
@@ -578,13 +610,14 @@ static int azx_corb_send_cmd(struct hda_bus *bus, u32 val)
 static void azx_update_rirb(struct azx *chip)
 {
 	unsigned int rp, wp;
+	unsigned int addr;
 	u32 res, res_ex;
 
 	wp = azx_readb(chip, RIRBWP);
 	if (wp == chip->rirb.wp)
 		return;
 	chip->rirb.wp = wp;
-		
+
 	while (chip->rirb.rp != wp) {
 		chip->rirb.rp++;
 		chip->rirb.rp %= ICH6_MAX_RIRB_ENTRIES;
@@ -592,18 +625,24 @@ static void azx_update_rirb(struct azx *chip)
 		rp = chip->rirb.rp << 1; /* an RIRB entry is 8-bytes */
 		res_ex = le32_to_cpu(chip->rirb.buf[rp + 1]);
 		res = le32_to_cpu(chip->rirb.buf[rp]);
+		addr = azx_response_addr(res_ex);
 		if (res_ex & ICH6_RIRB_EX_UNSOL_EV)
 			snd_hda_queue_unsol_event(chip->bus, res, res_ex);
-		else if (chip->rirb.cmds) {
-			chip->rirb.res = res;
+		else if (chip->rirb.cmds[addr]) {
+			chip->rirb.res[addr] = res;
 			smp_wmb();
-			chip->rirb.cmds--;
-		}
+			chip->rirb.cmds[addr]--;
+		} else
+			snd_printk(KERN_ERR SFX "spurious response %#x:%#x, "
+				   "last cmd=%#08x\n",
+				   res, res_ex,
+				   chip->last_cmd[addr]);
 	}
 }
 
 /* receive a response */
-static unsigned int azx_rirb_get_response(struct hda_bus *bus)
+static unsigned int azx_rirb_get_response(struct hda_bus *bus,
+					  unsigned int addr)
 {
 	struct azx *chip = bus->private_data;
 	unsigned long timeout;
@@ -616,10 +655,10 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus)
 			azx_update_rirb(chip);
 			spin_unlock_irq(&chip->reg_lock);
 		}
-		if (!chip->rirb.cmds) {
+		if (!chip->rirb.cmds[addr]) {
 			smp_rmb();
 			bus->rirb_error = 0;
-			return chip->rirb.res; /* the last value */
+			return chip->rirb.res[addr]; /* the last value */
 		}
 		if (time_after(jiffies, timeout))
 			break;
@@ -633,7 +672,8 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus)
 
 	if (chip->msi) {
 		snd_printk(KERN_WARNING SFX "No response from codec, "
-			   "disabling MSI: last cmd=0x%08x\n", chip->last_cmd);
+			   "disabling MSI: last cmd=0x%08x\n",
+			   chip->last_cmd[addr]);
 		free_irq(chip->irq, chip);
 		chip->irq = -1;
 		pci_disable_msi(chip->pci);
@@ -648,7 +688,7 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus)
 	if (!chip->polling_mode) {
 		snd_printk(KERN_WARNING SFX "azx_get_response timeout, "
 			   "switching to polling mode: last cmd=0x%08x\n",
-			   chip->last_cmd);
+			   chip->last_cmd[addr]);
 		chip->polling_mode = 1;
 		goto again;
 	}
@@ -672,7 +712,7 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus)
 
 	snd_printk(KERN_ERR "hda_intel: azx_get_response timeout, "
 		   "switching to single_cmd mode: last cmd=0x%08x\n",
-		   chip->last_cmd);
+		   chip->last_cmd[addr]);
 	chip->single_cmd = 1;
 	bus->response_reset = 0;
 	/* re-initialize CORB/RIRB */
@@ -692,7 +732,7 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus)
  */
 
 /* receive a response */
-static int azx_single_wait_for_response(struct azx *chip)
+static int azx_single_wait_for_response(struct azx *chip, unsigned int addr)
 {
 	int timeout = 50;
 
@@ -700,7 +740,7 @@ static int azx_single_wait_for_response(struct azx *chip)
 		/* check IRV busy bit */
 		if (azx_readw(chip, IRS) & ICH6_IRS_VALID) {
 			/* reuse rirb.res as the response return value */
-			chip->rirb.res = azx_readl(chip, IR);
+			chip->rirb.res[addr] = azx_readl(chip, IR);
 			return 0;
 		}
 		udelay(1);
@@ -708,7 +748,7 @@ static int azx_single_wait_for_response(struct azx *chip)
 	if (printk_ratelimit())
 		snd_printd(SFX "get_response timeout: IRS=0x%x\n",
 			   azx_readw(chip, IRS));
-	chip->rirb.res = -1;
+	chip->rirb.res[addr] = -1;
 	return -EIO;
 }
 
@@ -716,6 +756,7 @@ static int azx_single_wait_for_response(struct azx *chip)
 static int azx_single_send_cmd(struct hda_bus *bus, u32 val)
 {
 	struct azx *chip = bus->private_data;
+	unsigned int addr = azx_command_addr(val);
 	int timeout = 50;
 
 	bus->rirb_error = 0;
@@ -728,7 +769,7 @@ static int azx_single_send_cmd(struct hda_bus *bus, u32 val)
 			azx_writel(chip, IC, val);
 			azx_writew(chip, IRS, azx_readw(chip, IRS) |
 				   ICH6_IRS_BUSY);
-			return azx_single_wait_for_response(chip);
+			return azx_single_wait_for_response(chip, addr);
 		}
 		udelay(1);
 	}
@@ -739,10 +780,11 @@ static int azx_single_send_cmd(struct hda_bus *bus, u32 val)
 }
 
 /* receive a response */
-static unsigned int azx_single_get_response(struct hda_bus *bus)
+static unsigned int azx_single_get_response(struct hda_bus *bus,
+					    unsigned int addr)
 {
 	struct azx *chip = bus->private_data;
-	return chip->rirb.res;
+	return chip->rirb.res[addr];
 }
 
 /*
@@ -757,7 +799,7 @@ static int azx_send_cmd(struct hda_bus *bus, unsigned int val)
 {
 	struct azx *chip = bus->private_data;
 
-	chip->last_cmd = val;
+	chip->last_cmd[azx_command_addr(val)] = val;
 	if (chip->single_cmd)
 		return azx_single_send_cmd(bus, val);
 	else
@@ -765,13 +807,14 @@ static int azx_send_cmd(struct hda_bus *bus, unsigned int val)
 }
 
 /* get a response */
-static unsigned int azx_get_response(struct hda_bus *bus)
+static unsigned int azx_get_response(struct hda_bus *bus,
+				     unsigned int addr)
 {
 	struct azx *chip = bus->private_data;
 	if (chip->single_cmd)
-		return azx_single_get_response(bus);
+		return azx_single_get_response(bus, addr);
 	else
-		return azx_rirb_get_response(bus);
+		return azx_rirb_get_response(bus, addr);
 }
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
@@ -1243,10 +1286,12 @@ static int probe_codec(struct azx *chip, int addr)
 		(AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID;
 	unsigned int res;
 
+	mutex_lock(&chip->bus->cmd_mutex);
 	chip->probing = 1;
 	azx_send_cmd(chip->bus, cmd);
-	res = azx_get_response(chip->bus);
+	res = azx_get_response(chip->bus, addr);
 	chip->probing = 0;
+	mutex_unlock(&chip->bus->cmd_mutex);
 	if (res == -1)
 		return -EIO;
 	snd_printdd(SFX "codec #%d probed OK\n", addr);
@@ -1454,6 +1499,18 @@ static int azx_pcm_open(struct snd_pcm_substream *substream)
 		mutex_unlock(&chip->open_mutex);
 		return err;
 	}
+	snd_pcm_limit_hw_rates(runtime);
+	/* sanity check */
+	if (snd_BUG_ON(!runtime->hw.channels_min) ||
+	    snd_BUG_ON(!runtime->hw.channels_max) ||
+	    snd_BUG_ON(!runtime->hw.formats) ||
+	    snd_BUG_ON(!runtime->hw.rates)) {
+		azx_release_device(azx_dev);
+		hinfo->ops.close(hinfo, apcm->codec, substream);
+		snd_hda_power_down(apcm->codec);
+		mutex_unlock(&chip->open_mutex);
+		return -EINVAL;
+	}
 	spin_lock_irqsave(&chip->reg_lock, flags);
 	azx_dev->substream = substream;
 	azx_dev->running = 0;
@@ -1462,7 +1519,6 @@ static int azx_pcm_open(struct snd_pcm_substream *substream)
 	runtime->private_data = azx_dev;
 	snd_pcm_set_sync(substream);
 	mutex_unlock(&chip->open_mutex);
-
 	return 0;
 }
 
@@ -2322,9 +2378,19 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
 	gcap = azx_readw(chip, GCAP);
 	snd_printdd(SFX "chipset global capabilities = 0x%x\n", gcap);
 
-	/* ATI chips seems buggy about 64bit DMA addresses */
-	if (chip->driver_type == AZX_DRIVER_ATI)
-		gcap &= ~ICH6_GCAP_64OK;
+	/* disable SB600 64bit support for safety */
+	if ((chip->driver_type == AZX_DRIVER_ATI) ||
+	    (chip->driver_type == AZX_DRIVER_ATIHDMI)) {
+		struct pci_dev *p_smbus;
+		p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
+					 PCI_DEVICE_ID_ATI_SBX00_SMBUS,
+					 NULL);
+		if (p_smbus) {
+			if (p_smbus->revision < 0x30)
+				gcap &= ~ICH6_GCAP_64OK;
+			pci_dev_put(p_smbus);
+		}
+	}
 
 	/* allow 64bit DMA address if supported by H/W */
 	if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 84cc49ca914..403588c6e3f 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -72,6 +72,7 @@ struct ad198x_spec {
 	hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS];
 
 	unsigned int jack_present :1;
+	unsigned int inv_jack_detect:1;
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	struct hda_loopback_check loopback;
@@ -669,39 +670,13 @@ static struct hda_input_mux ad1986a_automic_capture_source = {
 	},
 };
 
-static struct snd_kcontrol_new ad1986a_laptop_eapd_mixers[] = {
+static struct snd_kcontrol_new ad1986a_laptop_master_mixers[] = {
 	HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol),
 	HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw),
-	HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Capture Source",
-		.info = ad198x_mux_enum_info,
-		.get = ad198x_mux_enum_get,
-		.put = ad198x_mux_enum_put,
-	},
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "External Amplifier",
-		.info = ad198x_eapd_info,
-		.get = ad198x_eapd_get,
-		.put = ad198x_eapd_put,
-		.private_value = 0x1b | (1 << 8), /* port-D, inversed */
-	},
 	{ } /* end */
 };
 
-static struct snd_kcontrol_new ad1986a_samsung_mixers[] = {
-	HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol),
-	HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw),
+static struct snd_kcontrol_new ad1986a_laptop_eapd_mixers[] = {
 	HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
@@ -727,6 +702,12 @@ static struct snd_kcontrol_new ad1986a_samsung_mixers[] = {
 	{ } /* end */
 };
 
+static struct snd_kcontrol_new ad1986a_laptop_intmic_mixers[] = {
+	HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0, HDA_OUTPUT),
+	{ } /* end */
+};
+
 /* re-connect the mic boost input according to the jack sensing */
 static void ad1986a_automic(struct hda_codec *codec)
 {
@@ -776,8 +757,9 @@ static void ad1986a_hp_automute(struct hda_codec *codec)
 	unsigned int present;
 
 	present = snd_hda_codec_read(codec, 0x1a, 0, AC_VERB_GET_PIN_SENSE, 0);
-	/* Lenovo N100 seems to report the reversed bit for HP jack-sensing */
-	spec->jack_present = !(present & 0x80000000);
+	spec->jack_present = !!(present & 0x80000000);
+	if (spec->inv_jack_detect)
+		spec->jack_present = !spec->jack_present;
 	ad1986a_update_hp(codec);
 }
 
@@ -816,7 +798,7 @@ static int ad1986a_hp_master_sw_put(struct snd_kcontrol *kcontrol,
 	return change;
 }
 
-static struct snd_kcontrol_new ad1986a_laptop_automute_mixers[] = {
+static struct snd_kcontrol_new ad1986a_automute_master_mixers[] = {
 	HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol),
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -826,33 +808,10 @@ static struct snd_kcontrol_new ad1986a_laptop_automute_mixers[] = {
 		.put = ad1986a_hp_master_sw_put,
 		.private_value = HDA_COMPOSE_AMP_VAL(0x1a, 3, 0, HDA_OUTPUT),
 	},
-	HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Capture Source",
-		.info = ad198x_mux_enum_info,
-		.get = ad198x_mux_enum_get,
-		.put = ad198x_mux_enum_put,
-	},
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "External Amplifier",
-		.info = ad198x_eapd_info,
-		.get = ad198x_eapd_get,
-		.put = ad198x_eapd_put,
-		.private_value = 0x1b | (1 << 8), /* port-D, inversed */
-	},
 	{ } /* end */
 };
 
+
 /*
  * initialization verbs
  */
@@ -981,6 +940,27 @@ static struct hda_verb ad1986a_hp_init_verbs[] = {
 	{}
 };
 
+static void ad1986a_samsung_p50_unsol_event(struct hda_codec *codec,
+					    unsigned int res)
+{
+	switch (res >> 26) {
+	case AD1986A_HP_EVENT:
+		ad1986a_hp_automute(codec);
+		break;
+	case AD1986A_MIC_EVENT:
+		ad1986a_automic(codec);
+		break;
+	}
+}
+
+static int ad1986a_samsung_p50_init(struct hda_codec *codec)
+{
+	ad198x_init(codec);
+	ad1986a_hp_automute(codec);
+	ad1986a_automic(codec);
+	return 0;
+}
+
 
 /* models */
 enum {
@@ -991,6 +971,7 @@ enum {
 	AD1986A_LAPTOP_AUTOMUTE,
 	AD1986A_ULTRA,
 	AD1986A_SAMSUNG,
+	AD1986A_SAMSUNG_P50,
 	AD1986A_MODELS
 };
 
@@ -1002,6 +983,7 @@ static const char *ad1986a_models[AD1986A_MODELS] = {
 	[AD1986A_LAPTOP_AUTOMUTE] = "laptop-automute",
 	[AD1986A_ULTRA]		= "ultra",
 	[AD1986A_SAMSUNG]	= "samsung",
+	[AD1986A_SAMSUNG_P50]	= "samsung-p50",
 };
 
 static struct snd_pci_quirk ad1986a_cfg_tbl[] = {
@@ -1024,6 +1006,7 @@ static struct snd_pci_quirk ad1986a_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba", AD1986A_LAPTOP_EAPD),
 	SND_PCI_QUIRK(0x144d, 0xb03c, "Samsung R55", AD1986A_3STACK),
 	SND_PCI_QUIRK(0x144d, 0xc01e, "FSC V2060", AD1986A_LAPTOP),
+	SND_PCI_QUIRK(0x144d, 0xc024, "Samsung P50", AD1986A_SAMSUNG_P50),
 	SND_PCI_QUIRK(0x144d, 0xc027, "Samsung Q1", AD1986A_ULTRA),
 	SND_PCI_QUIRK_MASK(0x144d, 0xff00, 0xc000, "Samsung", AD1986A_SAMSUNG),
 	SND_PCI_QUIRK(0x144d, 0xc504, "Samsung Q35", AD1986A_3STACK),
@@ -1111,7 +1094,10 @@ static int patch_ad1986a(struct hda_codec *codec)
 		spec->multiout.dac_nids = ad1986a_laptop_dac_nids;
 		break;
 	case AD1986A_LAPTOP_EAPD:
-		spec->mixers[0] = ad1986a_laptop_eapd_mixers;
+		spec->num_mixers = 3;
+		spec->mixers[0] = ad1986a_laptop_master_mixers;
+		spec->mixers[1] = ad1986a_laptop_eapd_mixers;
+		spec->mixers[2] = ad1986a_laptop_intmic_mixers;
 		spec->num_init_verbs = 2;
 		spec->init_verbs[1] = ad1986a_eapd_init_verbs;
 		spec->multiout.max_channels = 2;
@@ -1122,7 +1108,9 @@ static int patch_ad1986a(struct hda_codec *codec)
 		spec->input_mux = &ad1986a_laptop_eapd_capture_source;
 		break;
 	case AD1986A_SAMSUNG:
-		spec->mixers[0] = ad1986a_samsung_mixers;
+		spec->num_mixers = 2;
+		spec->mixers[0] = ad1986a_laptop_master_mixers;
+		spec->mixers[1] = ad1986a_laptop_eapd_mixers;
 		spec->num_init_verbs = 3;
 		spec->init_verbs[1] = ad1986a_eapd_init_verbs;
 		spec->init_verbs[2] = ad1986a_automic_verbs;
@@ -1135,8 +1123,28 @@ static int patch_ad1986a(struct hda_codec *codec)
 		codec->patch_ops.unsol_event = ad1986a_automic_unsol_event;
 		codec->patch_ops.init = ad1986a_automic_init;
 		break;
+	case AD1986A_SAMSUNG_P50:
+		spec->num_mixers = 2;
+		spec->mixers[0] = ad1986a_automute_master_mixers;
+		spec->mixers[1] = ad1986a_laptop_eapd_mixers;
+		spec->num_init_verbs = 4;
+		spec->init_verbs[1] = ad1986a_eapd_init_verbs;
+		spec->init_verbs[2] = ad1986a_automic_verbs;
+		spec->init_verbs[3] = ad1986a_hp_init_verbs;
+		spec->multiout.max_channels = 2;
+		spec->multiout.num_dacs = 1;
+		spec->multiout.dac_nids = ad1986a_laptop_dac_nids;
+		if (!is_jack_available(codec, 0x25))
+			spec->multiout.dig_out_nid = 0;
+		spec->input_mux = &ad1986a_automic_capture_source;
+		codec->patch_ops.unsol_event = ad1986a_samsung_p50_unsol_event;
+		codec->patch_ops.init = ad1986a_samsung_p50_init;
+		break;
 	case AD1986A_LAPTOP_AUTOMUTE:
-		spec->mixers[0] = ad1986a_laptop_automute_mixers;
+		spec->num_mixers = 3;
+		spec->mixers[0] = ad1986a_automute_master_mixers;
+		spec->mixers[1] = ad1986a_laptop_eapd_mixers;
+		spec->mixers[2] = ad1986a_laptop_intmic_mixers;
 		spec->num_init_verbs = 3;
 		spec->init_verbs[1] = ad1986a_eapd_init_verbs;
 		spec->init_verbs[2] = ad1986a_hp_init_verbs;
@@ -1148,6 +1156,10 @@ static int patch_ad1986a(struct hda_codec *codec)
 		spec->input_mux = &ad1986a_laptop_eapd_capture_source;
 		codec->patch_ops.unsol_event = ad1986a_hp_unsol_event;
 		codec->patch_ops.init = ad1986a_hp_init;
+		/* Lenovo N100 seems to report the reversed bit
+		 * for HP jack-sensing
+		 */
+		spec->inv_jack_detect = 1;
 		break;
 	case AD1986A_ULTRA:
 		spec->mixers[0] = ad1986a_laptop_eapd_mixers;
@@ -3734,9 +3746,30 @@ static struct snd_kcontrol_new ad1884a_laptop_mixers[] = {
 	{ } /* end */
 };
 
+static int ad1884a_mobile_master_sw_put(struct snd_kcontrol *kcontrol,
+				        struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	int ret = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
+	int mute = (!ucontrol->value.integer.value[0] &&
+		    !ucontrol->value.integer.value[1]);
+	/* toggle GPIO1 according to the mute state */
+	snd_hda_codec_write_cache(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
+			    mute ? 0x02 : 0x0);
+	return ret;
+}
+
 static struct snd_kcontrol_new ad1884a_mobile_mixers[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),
+	/*HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),*/
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Master Playback Switch",
+		.info = snd_hda_mixer_amp_switch_info,
+		.get = snd_hda_mixer_amp_switch_get,
+		.put = ad1884a_mobile_master_sw_put,
+		.private_value = HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
+	},
 	HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
 	HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT),
@@ -3802,9 +3835,11 @@ static struct hda_verb ad1884a_laptop_verbs[] = {
 	/* Port-F (int speaker) mixer - route only from analog mixer */
 	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
 	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	/* Port-F pin */
-	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	/* Port-F (int speaker) pin */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
 	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* required for compaq 6530s/6531s speaker output */
+	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
 	/* Port-C pin - internal mic-in */
 	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
 	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
@@ -3857,6 +3892,10 @@ static struct hda_verb ad1884a_mobile_verbs[] = {
 	/* unsolicited event for pin-sense */
 	{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
 	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+	/* allow to touch GPIO1 (for mute control) */
+	{0x01, AC_VERB_SET_GPIO_MASK, 0x02},
+	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
+	{0x01, AC_VERB_SET_GPIO_DATA, 0x02}, /* first muted */
 	{ } /* end */
 };
 
@@ -3966,6 +4005,7 @@ static struct snd_pci_quirk ad1884a_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x3037, "HP 2230s", AD1884A_LAPTOP),
 	SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE),
 	SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x3070, "HP", AD1884A_MOBILE),
+	SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30d0, "HP laptop", AD1884A_LAPTOP),
 	SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30e0, "HP laptop", AD1884A_LAPTOP),
 	SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3600, "HP laptop", AD1884A_LAPTOP),
 	SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD),
diff --git a/sound/pci/hda/patch_ca0110.c b/sound/pci/hda/patch_ca0110.c
index 392d108c355..019ca7cb56d 100644
--- a/sound/pci/hda/patch_ca0110.c
+++ b/sound/pci/hda/patch_ca0110.c
@@ -510,7 +510,7 @@ static int ca0110_parse_auto_config(struct hda_codec *codec)
 }
 
 
-int patch_ca0110(struct hda_codec *codec)
+static int patch_ca0110(struct hda_codec *codec)
 {
 	struct ca0110_spec *spec;
 	int err;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 33453319742..30eeb304351 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -275,13 +275,13 @@ struct alc_spec {
 						 */
 	unsigned int num_init_verbs;
 
-	char stream_name_analog[16];	/* analog PCM stream */
+	char stream_name_analog[32];	/* analog PCM stream */
 	struct hda_pcm_stream *stream_analog_playback;
 	struct hda_pcm_stream *stream_analog_capture;
 	struct hda_pcm_stream *stream_analog_alt_playback;
 	struct hda_pcm_stream *stream_analog_alt_capture;
 
-	char stream_name_digital[16];	/* digital PCM stream */
+	char stream_name_digital[32];	/* digital PCM stream */
 	struct hda_pcm_stream *stream_digital_playback;
 	struct hda_pcm_stream *stream_digital_capture;
 
@@ -559,7 +559,7 @@ static int alc_pin_mode_get(struct snd_kcontrol *kcontrol,
 
 	/* Find enumerated value for current pinctl setting */
 	i = alc_pin_mode_min(dir);
-	while (alc_pin_mode_values[i] != pinctl && i <= alc_pin_mode_max(dir))
+	while (i <= alc_pin_mode_max(dir) && alc_pin_mode_values[i] != pinctl)
 		i++;
 	*valp = i <= alc_pin_mode_max(dir) ? i: alc_pin_mode_min(dir);
 	return 0;
@@ -945,12 +945,13 @@ static void alc_fix_pll_init(struct hda_codec *codec, hda_nid_t nid,
 static void alc_automute_pin(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	unsigned int present;
+	unsigned int present, pincap;
 	unsigned int nid = spec->autocfg.hp_pins[0];
 	int i;
 
-	/* need to execute and sync at first */
-	snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+	pincap = snd_hda_query_pin_caps(codec, nid);
+	if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
+		snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
 	present = snd_hda_codec_read(codec, nid, 0,
 				     AC_VERB_GET_PIN_SENSE, 0);
 	spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
@@ -1392,7 +1393,7 @@ static struct hda_verb alc888_fujitsu_xa3530_verbs[] = {
 static void alc_automute_amp(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	unsigned int val, mute;
+	unsigned int val, mute, pincap;
 	hda_nid_t nid;
 	int i;
 
@@ -1401,6 +1402,10 @@ static void alc_automute_amp(struct hda_codec *codec)
 		nid = spec->autocfg.hp_pins[i];
 		if (!nid)
 			break;
+		pincap = snd_hda_query_pin_caps(codec, nid);
+		if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
+			snd_hda_codec_read(codec, nid, 0,
+					   AC_VERB_SET_PIN_SENSE, 0);
 		val = snd_hda_codec_read(codec, nid, 0,
 					 AC_VERB_GET_PIN_SENSE, 0);
 		if (val & AC_PINSENSE_PRESENCE) {
@@ -1471,6 +1476,10 @@ static struct hda_verb alc888_acer_aspire_4930g_verbs[] = {
 static struct hda_verb alc888_acer_aspire_6530g_verbs[] = {
 /* Bias voltage on for external mic port */
 	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN | PIN_VREF80},
+/* Front Mic: set to PIN_IN (empty by default) */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+/* Unselect Front Mic by default in input mixer 3 */
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)},
 /* Enable unsolicited event for HP jack */
 	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
 /* Enable speaker output */
@@ -1560,18 +1569,22 @@ static struct hda_input_mux alc888_2_capture_sources[2] = {
 static struct hda_input_mux alc888_acer_aspire_6530_sources[2] = {
 	/* Interal mic only available on one ADC */
 	{
-		.num_items = 3,
+		.num_items = 5,
 		.items = {
 			{ "Ext Mic", 0x0 },
+			{ "Line In", 0x2 },
 			{ "CD", 0x4 },
+			{ "Input Mix", 0xa },
 			{ "Int Mic", 0xb },
 		},
 	},
 	{
-		.num_items = 2,
+		.num_items = 4,
 		.items = {
 			{ "Ext Mic", 0x0 },
+			{ "Line In", 0x2 },
 			{ "CD", 0x4 },
+			{ "Input Mix", 0xa },
 		},
 	}
 };
@@ -1639,6 +1652,17 @@ static void alc888_acer_aspire_4930g_init_hook(struct hda_codec *codec)
 	alc_automute_amp(codec);
 }
 
+static void alc888_acer_aspire_6530g_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x16;
+	spec->autocfg.speaker_pins[2] = 0x17;
+	alc_automute_amp(codec);
+}
+
 static void alc889_acer_aspire_8930g_init_hook(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -4481,6 +4505,12 @@ static int alc880_parse_auto_config(struct hda_codec *codec)
 					      &dig_nid, 1);
 		if (err < 0)
 			continue;
+		if (dig_nid > 0x7f) {
+			printk(KERN_ERR "alc880_auto: invalid dig_nid "
+				"connection 0x%x for NID 0x%x\n", dig_nid,
+				spec->autocfg.dig_out_pins[i]);
+			continue;
+		}
 		if (!i)
 			spec->multiout.dig_out_nid = dig_nid;
 		else {
@@ -6393,9 +6423,9 @@ static struct hda_verb alc885_mbp_ch2_init[] = {
 };
 
 /*
- * 6ch mode
+ * 4ch mode
  */
-static struct hda_verb alc885_mbp_ch6_init[] = {
+static struct hda_verb alc885_mbp_ch4_init[] = {
 	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
 	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
 	{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
@@ -6404,9 +6434,9 @@ static struct hda_verb alc885_mbp_ch6_init[] = {
 	{ } /* end */
 };
 
-static struct hda_channel_mode alc885_mbp_6ch_modes[2] = {
+static struct hda_channel_mode alc885_mbp_4ch_modes[2] = {
 	{ 2, alc885_mbp_ch2_init },
-	{ 6, alc885_mbp_ch6_init },
+	{ 4, alc885_mbp_ch4_init },
 };
 
 /*
@@ -6467,10 +6497,11 @@ static struct snd_kcontrol_new alc882_base_mixer[] = {
 };
 
 static struct snd_kcontrol_new alc885_mbp3_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE   ("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE  ("Speaker Playback Switch", 0x14, 0x00, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("Speaker Playback Switch", 0x0c, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("Headphone Playback Switch", 0x0e, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
 	HDA_CODEC_MUTE  ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
@@ -6784,14 +6815,18 @@ static struct hda_verb alc885_mbp3_init_verbs[] = {
 	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
 	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
 	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* HP mixer */
+	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
 	/* Front Pin: output 0 (0x0c) */
 	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
 	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
 	{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* HP Pin: output 0 (0x0d) */
+	/* HP Pin: output 0 (0x0e) */
 	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x02},
 	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
 	/* Mic (rear) pin: input vref at 80% */
 	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
@@ -6895,9 +6930,6 @@ static struct hda_verb alc882_targa_verbs[] = {
 	{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
 
 	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
-	{0x01, AC_VERB_SET_GPIO_MASK, 0x03},
-	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x03},
-	{0x01, AC_VERB_SET_GPIO_DATA, 0x03},
 	{ } /* end */
 };
 
@@ -7168,10 +7200,11 @@ static struct alc_config_preset alc882_presets[] = {
 		.mixers = { alc885_mbp3_mixer, alc882_chmode_mixer },
 		.init_verbs = { alc885_mbp3_init_verbs,
 				alc880_gpio1_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc882_dac_nids),
+		.num_dacs = 2,
 		.dac_nids = alc882_dac_nids,
-		.channel_mode = alc885_mbp_6ch_modes,
-		.num_channel_mode = ARRAY_SIZE(alc885_mbp_6ch_modes),
+		.hp_nid = 0x04,
+		.channel_mode = alc885_mbp_4ch_modes,
+		.num_channel_mode = ARRAY_SIZE(alc885_mbp_4ch_modes),
 		.input_mux = &alc882_capture_source,
 		.dig_out_nid = ALC882_DIGOUT_NID,
 		.dig_in_nid = ALC882_DIGIN_NID,
@@ -7217,7 +7250,8 @@ static struct alc_config_preset alc882_presets[] = {
 	},
 	[ALC882_TARGA] = {
 		.mixers = { alc882_targa_mixer, alc882_chmode_mixer },
-		.init_verbs = { alc882_init_verbs, alc882_targa_verbs},
+		.init_verbs = { alc882_init_verbs, alc880_gpio3_init_verbs,
+				alc882_targa_verbs},
 		.num_dacs = ARRAY_SIZE(alc882_dac_nids),
 		.dac_nids = alc882_dac_nids,
 		.dig_out_nid = ALC882_DIGOUT_NID,
@@ -8189,6 +8223,8 @@ static struct snd_kcontrol_new alc888_acer_aspire_6530_mixer[] = {
 	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
 	HDA_CODEC_VOLUME("LFE Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("LFE Playback Switch", 0x0f, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
@@ -9064,7 +9100,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC883_AUTO),
 	SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO),
 	SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
-		ALC888_ACER_ASPIRE_4930G),
+		ALC888_ACER_ASPIRE_6530G),
 	SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
 		ALC888_ACER_ASPIRE_6530G),
 	/* default Acer -- disabled as it causes more problems.
@@ -9212,7 +9248,8 @@ static struct alc_config_preset alc883_presets[] = {
 	},
 	[ALC883_TARGA_DIG] = {
 		.mixers = { alc883_targa_mixer, alc883_chmode_mixer },
-		.init_verbs = { alc883_init_verbs, alc883_targa_verbs},
+		.init_verbs = { alc883_init_verbs, alc880_gpio3_init_verbs,
+				alc883_targa_verbs},
 		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
 		.dac_nids = alc883_dac_nids,
 		.dig_out_nid = ALC883_DIGOUT_NID,
@@ -9225,7 +9262,8 @@ static struct alc_config_preset alc883_presets[] = {
 	},
 	[ALC883_TARGA_2ch_DIG] = {
 		.mixers = { alc883_targa_2ch_mixer},
-		.init_verbs = { alc883_init_verbs, alc883_targa_verbs},
+		.init_verbs = { alc883_init_verbs, alc880_gpio3_init_verbs,
+				alc883_targa_verbs},
 		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
 		.dac_nids = alc883_dac_nids,
 		.adc_nids = alc883_adc_nids_alt,
@@ -9317,7 +9355,7 @@ static struct alc_config_preset alc883_presets[] = {
 			ARRAY_SIZE(alc888_2_capture_sources),
 		.input_mux = alc888_acer_aspire_6530_sources,
 		.unsol_event = alc_automute_amp_unsol_event,
-		.init_hook = alc888_acer_aspire_4930g_init_hook,
+		.init_hook = alc888_acer_aspire_6530g_init_hook,
 	},
 	[ALC888_ACER_ASPIRE_8930G] = {
 		.mixers = { alc888_base_mixer,
@@ -10599,6 +10637,18 @@ static void alc262_lenovo_3000_unsol_event(struct hda_codec *codec,
 	alc262_lenovo_3000_automute(codec, 1);
 }
 
+static int amp_stereo_mute_update(struct hda_codec *codec, hda_nid_t nid,
+				  int dir, int idx, long *valp)
+{
+	int i, change = 0;
+
+	for (i = 0; i < 2; i++, valp++)
+		change |= snd_hda_codec_amp_update(codec, nid, i, dir, idx,
+						   HDA_AMP_MUTE,
+						   *valp ? 0 : HDA_AMP_MUTE);
+	return change;
+}
+
 /* bind hp and internal speaker mute (with plug check) */
 static int alc262_fujitsu_master_sw_put(struct snd_kcontrol *kcontrol,
 					 struct snd_ctl_elem_value *ucontrol)
@@ -10607,13 +10657,8 @@ static int alc262_fujitsu_master_sw_put(struct snd_kcontrol *kcontrol,
 	long *valp = ucontrol->value.integer.value;
 	int change;
 
-	change = snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-						 HDA_AMP_MUTE,
-						 valp ? 0 : HDA_AMP_MUTE);
-	change |= snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-						 HDA_AMP_MUTE,
-						 valp ? 0 : HDA_AMP_MUTE);
-
+	change = amp_stereo_mute_update(codec, 0x14, HDA_OUTPUT, 0, valp);
+	change |= amp_stereo_mute_update(codec, 0x1b, HDA_OUTPUT, 0, valp);
 	if (change)
 		alc262_fujitsu_automute(codec, 0);
 	return change;
@@ -10648,10 +10693,7 @@ static int alc262_lenovo_3000_master_sw_put(struct snd_kcontrol *kcontrol,
 	long *valp = ucontrol->value.integer.value;
 	int change;
 
-	change = snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-						 HDA_AMP_MUTE,
-						 valp ? 0 : HDA_AMP_MUTE);
-
+	change = amp_stereo_mute_update(codec, 0x1b, HDA_OUTPUT, 0, valp);
 	if (change)
 		alc262_lenovo_3000_automute(codec, 0);
 	return change;
@@ -11822,12 +11864,7 @@ static int alc268_acer_master_sw_put(struct snd_kcontrol *kcontrol,
 	long *valp = ucontrol->value.integer.value;
 	int change;
 
-	change = snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0,
-					  HDA_AMP_MUTE,
-					  valp[0] ? 0 : HDA_AMP_MUTE);
-	change |= snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0,
-					   HDA_AMP_MUTE,
-					   valp[1] ? 0 : HDA_AMP_MUTE);
+	change = amp_stereo_mute_update(codec, 0x14, HDA_OUTPUT, 0, valp);
 	if (change)
 		alc268_acer_automute(codec, 0);
 	return change;
@@ -12437,6 +12474,8 @@ static int alc268_parse_auto_config(struct hda_codec *codec)
 	if (err < 0)
 		return err;
 
+	alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
 	return 1;
 }
 
@@ -12488,8 +12527,6 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = {
 			   ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
 	SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
-	SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05",
-			   ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER),
 	SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
@@ -12497,6 +12534,15 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = {
 	{}
 };
 
+/* Toshiba laptops have no unique PCI SSID but only codec SSID */
+static struct snd_pci_quirk alc268_ssid_cfg_tbl[] = {
+	SND_PCI_QUIRK(0x1179, 0xff0a, "TOSHIBA X-200", ALC268_AUTO),
+	SND_PCI_QUIRK(0x1179, 0xff0e, "TOSHIBA X-200 HDMI", ALC268_AUTO),
+	SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05",
+			   ALC268_TOSHIBA),
+	{}
+};
+
 static struct alc_config_preset alc268_presets[] = {
 	[ALC267_QUANTA_IL1] = {
 		.mixers = { alc267_quanta_il1_mixer, alc268_beep_mixer },
@@ -12663,6 +12709,10 @@ static int patch_alc268(struct hda_codec *codec)
 						  alc268_models,
 						  alc268_cfg_tbl);
 
+	if (board_config < 0 || board_config >= ALC268_MODEL_LAST)
+		board_config = snd_hda_check_board_codec_sid_config(codec,
+			ALC882_MODEL_LAST, alc268_models, alc268_ssid_cfg_tbl);
+
 	if (board_config < 0 || board_config >= ALC268_MODEL_LAST) {
 		printk(KERN_INFO "hda_codec: Unknown model for %s, "
 		       "trying auto-probe from BIOS...\n", codec->chip_name);
@@ -12848,20 +12898,11 @@ static struct snd_kcontrol_new alc269_lifebook_mixer[] = {
 	{ }
 };
 
-/* bind volumes of both NID 0x0c and 0x0d */
-static struct hda_bind_ctls alc269_epc_bind_vol = {
-	.ops = &snd_hda_bind_vol,
-	.values = {
-		HDA_COMPOSE_AMP_VAL(0x02, 3, 0, HDA_OUTPUT),
-		HDA_COMPOSE_AMP_VAL(0x03, 3, 0, HDA_OUTPUT),
-		0
-	},
-};
-
 static struct snd_kcontrol_new alc269_eeepc_mixer[] = {
-	HDA_CODEC_MUTE("iSpeaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
-	HDA_BIND_VOL("LineOut Playback Volume", &alc269_epc_bind_vol),
-	HDA_CODEC_MUTE("LineOut Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
 	{ } /* end */
 };
 
@@ -12874,12 +12915,7 @@ static struct snd_kcontrol_new alc269_epc_capture_mixer[] = {
 };
 
 /* FSC amilo */
-static struct snd_kcontrol_new alc269_fujitsu_mixer[] = {
-	HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
-	HDA_BIND_VOL("PCM Playback Volume", &alc269_epc_bind_vol),
-	{ } /* end */
-};
+#define alc269_fujitsu_mixer	alc269_eeepc_mixer
 
 static struct hda_verb alc269_quanta_fl1_verbs[] = {
 	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
@@ -13345,6 +13381,8 @@ static int alc269_parse_auto_config(struct hda_codec *codec)
 	if (!spec->cap_mixer && !spec->no_analog)
 		set_capture_mixer(spec);
 
+	alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
 	return 1;
 }
 
@@ -13542,6 +13580,8 @@ static int patch_alc269(struct hda_codec *codec)
 		set_capture_mixer(spec);
 	set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
 
+	spec->vmaster_nid = 0x02;
+
 	codec->patch_ops = alc_patch_ops;
 	if (board_config == ALC269_AUTO)
 		spec->init_hook = alc269_auto_init;
@@ -15136,7 +15176,7 @@ static struct snd_pci_quirk alc861vd_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x10de, 0x03f0, "Realtek ALC660 demo", ALC660VD_3ST),
 	SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba A135", ALC861VD_LENOVO),
 	/*SND_PCI_QUIRK(0x1179, 0xff00, "DALLAS", ALC861VD_DALLAS),*/ /*lenovo*/
-	SND_PCI_QUIRK(0x1179, 0xff01, "DALLAS", ALC861VD_DALLAS),
+	SND_PCI_QUIRK(0x1179, 0xff01, "Toshiba A135", ALC861VD_LENOVO),
 	SND_PCI_QUIRK(0x1179, 0xff03, "Toshiba P205", ALC861VD_LENOVO),
 	SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba L30-149", ALC861VD_DALLAS),
 	SND_PCI_QUIRK(0x1565, 0x820d, "Biostar NF61S SE", ALC861VD_6ST_DIG),
@@ -15556,9 +15596,12 @@ static int patch_alc861vd(struct hda_codec *codec)
 	spec->stream_digital_playback = &alc861vd_pcm_digital_playback;
 	spec->stream_digital_capture = &alc861vd_pcm_digital_capture;
 
-	spec->adc_nids = alc861vd_adc_nids;
-	spec->num_adc_nids = ARRAY_SIZE(alc861vd_adc_nids);
-	spec->capsrc_nids = alc861vd_capsrc_nids;
+	if (!spec->adc_nids) {
+		spec->adc_nids = alc861vd_adc_nids;
+		spec->num_adc_nids = ARRAY_SIZE(alc861vd_adc_nids);
+	}
+	if (!spec->capsrc_nids)
+		spec->capsrc_nids = alc861vd_capsrc_nids;
 
 	set_capture_mixer(spec);
 	set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
@@ -17475,9 +17518,12 @@ static int patch_alc662(struct hda_codec *codec)
 	spec->stream_digital_playback = &alc662_pcm_digital_playback;
 	spec->stream_digital_capture = &alc662_pcm_digital_capture;
 
-	spec->adc_nids = alc662_adc_nids;
-	spec->num_adc_nids = ARRAY_SIZE(alc662_adc_nids);
-	spec->capsrc_nids = alc662_capsrc_nids;
+	if (!spec->adc_nids) {
+		spec->adc_nids = alc662_adc_nids;
+		spec->num_adc_nids = ARRAY_SIZE(alc662_adc_nids);
+	}
+	if (!spec->capsrc_nids)
+		spec->capsrc_nids = alc662_capsrc_nids;
 
 	if (!spec->cap_mixer)
 		set_capture_mixer(spec);
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 14f3c3e0f62..6990cfcb6a3 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -76,6 +76,7 @@ enum {
 	STAC_92HD73XX_AUTO,
 	STAC_92HD73XX_NO_JD, /* no jack-detection */
 	STAC_92HD73XX_REF,
+	STAC_92HD73XX_INTEL,
 	STAC_DELL_M6_AMIC,
 	STAC_DELL_M6_DMIC,
 	STAC_DELL_M6_BOTH,
@@ -1590,8 +1591,6 @@ static struct snd_pci_quirk stac9200_cfg_tbl[] = {
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 		      "DFI LanParty", STAC_REF),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0xfb30,
-		      "SigmaTel",STAC_9205_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
 		      "DFI LanParty", STAC_REF),
 	/* Dell laptops have BIOS problem */
@@ -1779,6 +1778,7 @@ static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
 	[STAC_92HD73XX_AUTO] = "auto",
 	[STAC_92HD73XX_NO_JD] = "no-jd",
 	[STAC_92HD73XX_REF] = "ref",
+	[STAC_92HD73XX_INTEL] = "intel",
 	[STAC_DELL_M6_AMIC] = "dell-m6-amic",
 	[STAC_DELL_M6_DMIC] = "dell-m6-dmic",
 	[STAC_DELL_M6_BOTH] = "dell-m6",
@@ -1791,6 +1791,10 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
 				"DFI LanParty", STAC_92HD73XX_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
 				"DFI LanParty", STAC_92HD73XX_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x5002,
+				"Intel DG45ID", STAC_92HD73XX_INTEL),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x5003,
+				"Intel DG45FC", STAC_92HD73XX_INTEL),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254,
 				"Dell Studio 1535", STAC_DELL_M6_DMIC),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255,
@@ -1811,6 +1815,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
 				"Dell Studio 1537", STAC_DELL_M6_DMIC),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a0,
 				"Dell Studio 17", STAC_DELL_M6_DMIC),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02be,
+				"Dell Studio 1555", STAC_DELL_M6_DMIC),
 	{} /* terminator */
 };
 
@@ -2266,7 +2272,7 @@ static struct snd_pci_quirk stac927x_cfg_tbl[] = {
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x01f3, "Dell Inspiron 1420", STAC_DELL_BIOS),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x0227, "Dell Vostro 1400  ", STAC_DELL_BIOS),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x022e, "Dell     ", STAC_DELL_BIOS),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x022f, "Dell Inspiron 1525", STAC_DELL_3ST),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x022f, "Dell Inspiron 1525", STAC_DELL_BIOS),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x0242, "Dell     ", STAC_DELL_BIOS),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x0243, "Dell     ", STAC_DELL_BIOS),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x02ff, "Dell     ", STAC_DELL_BIOS),
@@ -2344,6 +2350,8 @@ static struct snd_pci_quirk stac9205_cfg_tbl[] = {
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 		      "DFI LanParty", STAC_9205_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0xfb30,
+		      "SigmaTel", STAC_9205_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
 		      "DFI LanParty", STAC_9205_REF),
 	/* Dell */
@@ -2378,6 +2386,7 @@ static struct snd_pci_quirk stac9205_cfg_tbl[] = {
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0228,
 		      "Dell Vostro 1500", STAC_9205_DELL_M42),
 	/* Gateway */
+	SND_PCI_QUIRK(0x107b, 0x0560, "Gateway T6834c", STAC_9205_EAPD),
 	SND_PCI_QUIRK(0x107b, 0x0565, "Gateway T1616", STAC_9205_EAPD),
 	{} /* terminator */
 };
@@ -4065,7 +4074,7 @@ static int stac92xx_add_jack(struct hda_codec *codec,
 	jack->nid = nid;
 	jack->type = type;
 
-	sprintf(name, "%s at %s %s Jack",
+	snprintf(name, sizeof(name), "%s at %s %s Jack",
 		snd_hda_get_jack_type(def_conf),
 		snd_hda_get_jack_connectivity(def_conf),
 		snd_hda_get_jack_location(def_conf));
@@ -5642,6 +5651,13 @@ static int patch_stac927x(struct hda_codec *codec)
 		/* GPIO2 High = Enable EAPD */
 		spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x04;
 		spec->gpio_data = 0x04;
+		switch (codec->subsystem_id) {
+		case 0x1028022f:
+			/* correct EAPD to be GPIO0 */
+			spec->eapd_mask = spec->gpio_mask = 0x01;
+			spec->gpio_dir = spec->gpio_data = 0x01;
+			break;
+		};
 		spec->dmic_nids = stac927x_dmic_nids;
 		spec->num_dmics = STAC927X_NUM_DMICS;
 
@@ -5854,6 +5870,8 @@ static unsigned int *stac9872_brd_tbl[STAC_9872_MODELS] = {
 };
 
 static struct snd_pci_quirk stac9872_cfg_tbl[] = {
+	SND_PCI_QUIRK_MASK(0x104d, 0xfff0, 0x81e0,
+			   "Sony VAIO F/S", STAC_9872_VAIO),
 	{} /* terminator */
 };
 
@@ -5866,6 +5884,8 @@ static int patch_stac9872(struct hda_codec *codec)
 	if (spec == NULL)
 		return -ENOMEM;
 	codec->spec = spec;
+	spec->num_pins = ARRAY_SIZE(stac9872_pin_nids);
+	spec->pin_nids = stac9872_pin_nids;
 
 	spec->board_config = snd_hda_check_board_config(codec, STAC_9872_MODELS,
 							stac9872_models,
@@ -5877,8 +5897,6 @@ static int patch_stac9872(struct hda_codec *codec)
 		stac92xx_set_config_regs(codec,
 					 stac9872_brd_tbl[spec->board_config]);
 
-	spec->num_pins = ARRAY_SIZE(stac9872_pin_nids);
-	spec->pin_nids = stac9872_pin_nids;
 	spec->multiout.dac_nids = spec->dac_nids;
 	spec->num_adcs = ARRAY_SIZE(stac9872_adc_nids);
 	spec->adc_nids = stac9872_adc_nids;
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 8e004fb6961..e8f10b10cce 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -210,7 +210,9 @@ struct via_spec {
 	/* capture */
 	unsigned int num_adc_nids;
 	hda_nid_t *adc_nids;
+	hda_nid_t mux_nids[3];
 	hda_nid_t dig_in_nid;
+	hda_nid_t dig_in_pin;
 
 	/* capture source */
 	const struct hda_input_mux *input_mux;
@@ -319,6 +321,9 @@ static void via_auto_set_output_and_unmute(struct hda_codec *codec,
 			    pin_type);
 	snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
 			    AMP_OUT_UNMUTE);
+	if (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD)
+		snd_hda_codec_write(codec, nid, 0, 
+				    AC_VERB_SET_EAPD_BTLENABLE, 0x02);
 }
 
 
@@ -387,27 +392,12 @@ static int via_mux_enum_put(struct snd_kcontrol *kcontrol,
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct via_spec *spec = codec->spec;
 	unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
-	unsigned int vendor_id = codec->vendor_id;
-
-	/* AIW0  lydia 060801 add for correct sw0 input select */
-	if (IS_VT1708_VENDORID(vendor_id) && (adc_idx == 0))
-		return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
-					     0x18, &spec->cur_mux[adc_idx]);
-	else if ((IS_VT1709_10CH_VENDORID(vendor_id) ||
-		  IS_VT1709_6CH_VENDORID(vendor_id)) && (adc_idx == 0))
-		return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
-					     0x19, &spec->cur_mux[adc_idx]);
-	else if ((IS_VT1708B_8CH_VENDORID(vendor_id) ||
-		  IS_VT1708B_4CH_VENDORID(vendor_id)) && (adc_idx == 0))
-		return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
-					     0x17, &spec->cur_mux[adc_idx]);
-	else if (IS_VT1702_VENDORID(vendor_id) && (adc_idx == 0))
-		return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
-					     0x13, &spec->cur_mux[adc_idx]);
-	else
-		return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
-					     spec->adc_nids[adc_idx],
-					     &spec->cur_mux[adc_idx]);
+
+	if (!spec->mux_nids[adc_idx])
+		return -EINVAL;
+	return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
+				     spec->mux_nids[adc_idx],
+				     &spec->cur_mux[adc_idx]);
 }
 
 static int via_independent_hp_info(struct snd_kcontrol *kcontrol,
@@ -998,25 +988,11 @@ static int via_init(struct hda_codec *codec)
 
 	/* Lydia Add for EAPD enable */
 	if (!spec->dig_in_nid) { /* No Digital In connection */
-		if (IS_VT1708_VENDORID(codec->vendor_id)) {
-			snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0,
-					    AC_VERB_SET_PIN_WIDGET_CONTROL,
-					    PIN_OUT);
-			snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0,
-					    AC_VERB_SET_EAPD_BTLENABLE, 0x02);
-		} else if (IS_VT1709_10CH_VENDORID(codec->vendor_id) ||
-			   IS_VT1709_6CH_VENDORID(codec->vendor_id)) {
-			snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0,
+		if (spec->dig_in_pin) {
+			snd_hda_codec_write(codec, spec->dig_in_pin, 0,
 					    AC_VERB_SET_PIN_WIDGET_CONTROL,
 					    PIN_OUT);
-			snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0,
-					    AC_VERB_SET_EAPD_BTLENABLE, 0x02);
-		} else if (IS_VT1708B_8CH_VENDORID(codec->vendor_id) ||
-			   IS_VT1708B_4CH_VENDORID(codec->vendor_id)) {
-			snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0,
-					    AC_VERB_SET_PIN_WIDGET_CONTROL,
-					    PIN_OUT);
-			snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0,
+			snd_hda_codec_write(codec, spec->dig_in_pin, 0,
 					    AC_VERB_SET_EAPD_BTLENABLE, 0x02);
 		}
 	} else /* enable SPDIF-input pin */
@@ -1326,6 +1302,7 @@ static int vt1708_parse_auto_config(struct hda_codec *codec)
 
 	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = VT1708_DIGOUT_NID;
+	spec->dig_in_pin = VT1708_DIGIN_PIN;
 	if (spec->autocfg.dig_in_pin)
 		spec->dig_in_nid = VT1708_DIGIN_NID;
 
@@ -1352,6 +1329,34 @@ static int via_auto_init(struct hda_codec *codec)
 	return 0;
 }
 
+static int get_mux_nids(struct hda_codec *codec)
+{
+	struct via_spec *spec = codec->spec;
+	hda_nid_t nid, conn[8];
+	unsigned int type;
+	int i, n;
+
+	for (i = 0; i < spec->num_adc_nids; i++) {
+		nid = spec->adc_nids[i];
+		while (nid) {
+			type = (get_wcaps(codec, nid) & AC_WCAP_TYPE)
+				>> AC_WCAP_TYPE_SHIFT;
+			if (type == AC_WID_PIN)
+				break;
+			n = snd_hda_get_connections(codec, nid, conn,
+						    ARRAY_SIZE(conn));
+			if (n <= 0)
+				break;
+			if (n > 1) {
+				spec->mux_nids[i] = nid;
+				break;
+			}
+			nid = conn[0];
+		}
+	}
+	return 0;
+}
+
 static int patch_vt1708(struct hda_codec *codec)
 {
 	struct via_spec *spec;
@@ -1390,6 +1395,7 @@ static int patch_vt1708(struct hda_codec *codec)
 	if (!spec->adc_nids && spec->input_mux) {
 		spec->adc_nids = vt1708_adc_nids;
 		spec->num_adc_nids = ARRAY_SIZE(vt1708_adc_nids);
+		get_mux_nids(codec);
 		spec->mixers[spec->num_mixers] = vt1708_capture_mixer;
 		spec->num_mixers++;
 	}
@@ -1799,6 +1805,7 @@ static int vt1709_parse_auto_config(struct hda_codec *codec)
 
 	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = VT1709_DIGOUT_NID;
+	spec->dig_in_pin = VT1709_DIGIN_PIN;
 	if (spec->autocfg.dig_in_pin)
 		spec->dig_in_nid = VT1709_DIGIN_NID;
 
@@ -1859,6 +1866,7 @@ static int patch_vt1709_10ch(struct hda_codec *codec)
 	if (!spec->adc_nids && spec->input_mux) {
 		spec->adc_nids = vt1709_adc_nids;
 		spec->num_adc_nids = ARRAY_SIZE(vt1709_adc_nids);
+		get_mux_nids(codec);
 		spec->mixers[spec->num_mixers] = vt1709_capture_mixer;
 		spec->num_mixers++;
 	}
@@ -1952,6 +1960,7 @@ static int patch_vt1709_6ch(struct hda_codec *codec)
 	if (!spec->adc_nids && spec->input_mux) {
 		spec->adc_nids = vt1709_adc_nids;
 		spec->num_adc_nids = ARRAY_SIZE(vt1709_adc_nids);
+		get_mux_nids(codec);
 		spec->mixers[spec->num_mixers] = vt1709_capture_mixer;
 		spec->num_mixers++;
 	}
@@ -2344,6 +2353,7 @@ static int vt1708B_parse_auto_config(struct hda_codec *codec)
 
 	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = VT1708B_DIGOUT_NID;
+	spec->dig_in_pin = VT1708B_DIGIN_PIN;
 	if (spec->autocfg.dig_in_pin)
 		spec->dig_in_nid = VT1708B_DIGIN_NID;
 
@@ -2404,6 +2414,7 @@ static int patch_vt1708B_8ch(struct hda_codec *codec)
 	if (!spec->adc_nids && spec->input_mux) {
 		spec->adc_nids = vt1708B_adc_nids;
 		spec->num_adc_nids = ARRAY_SIZE(vt1708B_adc_nids);
+		get_mux_nids(codec);
 		spec->mixers[spec->num_mixers] = vt1708B_capture_mixer;
 		spec->num_mixers++;
 	}
@@ -2455,6 +2466,7 @@ static int patch_vt1708B_4ch(struct hda_codec *codec)
 	if (!spec->adc_nids && spec->input_mux) {
 		spec->adc_nids = vt1708B_adc_nids;
 		spec->num_adc_nids = ARRAY_SIZE(vt1708B_adc_nids);
+		get_mux_nids(codec);
 		spec->mixers[spec->num_mixers] = vt1708B_capture_mixer;
 		spec->num_mixers++;
 	}
@@ -2889,6 +2901,7 @@ static int patch_vt1708S(struct hda_codec *codec)
 	if (!spec->adc_nids && spec->input_mux) {
 		spec->adc_nids = vt1708S_adc_nids;
 		spec->num_adc_nids = ARRAY_SIZE(vt1708S_adc_nids);
+		get_mux_nids(codec);
 		spec->mixers[spec->num_mixers] = vt1708S_capture_mixer;
 		spec->num_mixers++;
 	}
@@ -3206,6 +3219,7 @@ static int patch_vt1702(struct hda_codec *codec)
 	if (!spec->adc_nids && spec->input_mux) {
 		spec->adc_nids = vt1702_adc_nids;
 		spec->num_adc_nids = ARRAY_SIZE(vt1702_adc_nids);
+		get_mux_nids(codec);
 		spec->mixers[spec->num_mixers] = vt1702_capture_mixer;
 		spec->num_mixers++;
 	}
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 0d0cdbdb448..cecf1ffeeaa 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -107,7 +107,7 @@ MODULE_PARM_DESC(dxr_enable, "Enable DXR support for Terratec DMX6FIRE.");
 
 
 static const struct pci_device_id snd_ice1712_ids[] = {
-	{ PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_ICE_1712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },   /* ICE1712 */
+	{ PCI_VDEVICE(ICE, PCI_DEVICE_ID_ICE_1712), 0 },   /* ICE1712 */
 	{ 0, }
 };
 
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index 36ade77cf37..cc84a831eb2 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -93,7 +93,7 @@ MODULE_PARM_DESC(model, "Use the given board model.");
 
 /* Both VT1720 and VT1724 have the same PCI IDs */
 static const struct pci_device_id snd_vt1724_ids[] = {
-	{ PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_VT1724, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VDEVICE(ICE, PCI_DEVICE_ID_VT1724), 0 },
 	{ 0, }
 };
 
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 8aa5687f392..171ada53520 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -421,29 +421,29 @@ struct intel8x0 {
 };
 
 static struct pci_device_id snd_intel8x0_ids[] = {
-	{ 0x8086, 0x2415, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801AA */
-	{ 0x8086, 0x2425, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82901AB */
-	{ 0x8086, 0x2445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801BA */
-	{ 0x8086, 0x2485, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* ICH3 */
-	{ 0x8086, 0x24c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH4 */
-	{ 0x8086, 0x24d5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH5 */
-	{ 0x8086, 0x25a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ESB */
-	{ 0x8086, 0x266e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH6 */
-	{ 0x8086, 0x27de, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH7 */
-	{ 0x8086, 0x2698, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ESB2 */
-	{ 0x8086, 0x7195, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 440MX */
-	{ 0x1039, 0x7012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_SIS },	/* SI7012 */
-	{ 0x10de, 0x01b1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* NFORCE */
-	{ 0x10de, 0x003a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* MCP04 */
-	{ 0x10de, 0x006a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* NFORCE2 */
-	{ 0x10de, 0x0059, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* CK804 */
-	{ 0x10de, 0x008a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* CK8 */
-	{ 0x10de, 0x00da, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* NFORCE3 */
-	{ 0x10de, 0x00ea, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* CK8S */
-	{ 0x10de, 0x026b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* MCP51 */
-	{ 0x1022, 0x746d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* AMD8111 */
-	{ 0x1022, 0x7445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* AMD768 */
-	{ 0x10b9, 0x5455, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALI },   /* Ali5455 */
+	{ PCI_VDEVICE(INTEL, 0x2415), DEVICE_INTEL },	/* 82801AA */
+	{ PCI_VDEVICE(INTEL, 0x2425), DEVICE_INTEL },	/* 82901AB */
+	{ PCI_VDEVICE(INTEL, 0x2445), DEVICE_INTEL },	/* 82801BA */
+	{ PCI_VDEVICE(INTEL, 0x2485), DEVICE_INTEL },	/* ICH3 */
+	{ PCI_VDEVICE(INTEL, 0x24c5), DEVICE_INTEL_ICH4 }, /* ICH4 */
+	{ PCI_VDEVICE(INTEL, 0x24d5), DEVICE_INTEL_ICH4 }, /* ICH5 */
+	{ PCI_VDEVICE(INTEL, 0x25a6), DEVICE_INTEL_ICH4 }, /* ESB */
+	{ PCI_VDEVICE(INTEL, 0x266e), DEVICE_INTEL_ICH4 }, /* ICH6 */
+	{ PCI_VDEVICE(INTEL, 0x27de), DEVICE_INTEL_ICH4 }, /* ICH7 */
+	{ PCI_VDEVICE(INTEL, 0x2698), DEVICE_INTEL_ICH4 }, /* ESB2 */
+	{ PCI_VDEVICE(INTEL, 0x7195), DEVICE_INTEL },	/* 440MX */
+	{ PCI_VDEVICE(SI, 0x7012), DEVICE_SIS },	/* SI7012 */
+	{ PCI_VDEVICE(NVIDIA, 0x01b1), DEVICE_NFORCE },	/* NFORCE */
+	{ PCI_VDEVICE(NVIDIA, 0x003a), DEVICE_NFORCE },	/* MCP04 */
+	{ PCI_VDEVICE(NVIDIA, 0x006a), DEVICE_NFORCE },	/* NFORCE2 */
+	{ PCI_VDEVICE(NVIDIA, 0x0059), DEVICE_NFORCE },	/* CK804 */
+	{ PCI_VDEVICE(NVIDIA, 0x008a), DEVICE_NFORCE },	/* CK8 */
+	{ PCI_VDEVICE(NVIDIA, 0x00da), DEVICE_NFORCE },	/* NFORCE3 */
+	{ PCI_VDEVICE(NVIDIA, 0x00ea), DEVICE_NFORCE },	/* CK8S */
+	{ PCI_VDEVICE(NVIDIA, 0x026b), DEVICE_NFORCE },	/* MCP51 */
+	{ PCI_VDEVICE(AMD, 0x746d), DEVICE_INTEL },	/* AMD8111 */
+	{ PCI_VDEVICE(AMD, 0x7445), DEVICE_INTEL },	/* AMD768 */
+	{ PCI_VDEVICE(AL, 0x5455), DEVICE_ALI },   /* Ali5455 */
 	{ 0, }
 };
 
diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c
index 6ec0fc50d6b..9e7d12e7673 100644
--- a/sound/pci/intel8x0m.c
+++ b/sound/pci/intel8x0m.c
@@ -220,24 +220,24 @@ struct intel8x0m {
 };
 
 static struct pci_device_id snd_intel8x0m_ids[] = {
-	{ 0x8086, 0x2416, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801AA */
-	{ 0x8086, 0x2426, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82901AB */
-	{ 0x8086, 0x2446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801BA */
-	{ 0x8086, 0x2486, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* ICH3 */
-	{ 0x8086, 0x24c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH4 */
-	{ 0x8086, 0x24d6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH5 */
-	{ 0x8086, 0x266d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* ICH6 */
-	{ 0x8086, 0x27dd, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* ICH7 */
-	{ 0x8086, 0x7196, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 440MX */
-	{ 0x1022, 0x7446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* AMD768 */
-	{ 0x1039, 0x7013, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_SIS },	/* SI7013 */
-	{ 0x10de, 0x01c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE */
-	{ 0x10de, 0x0069, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE2 */
-	{ 0x10de, 0x0089, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE2s */
-	{ 0x10de, 0x00d9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE3 */
+	{ PCI_VDEVICE(INTEL, 0x2416), DEVICE_INTEL },	/* 82801AA */
+	{ PCI_VDEVICE(INTEL, 0x2426), DEVICE_INTEL },	/* 82901AB */
+	{ PCI_VDEVICE(INTEL, 0x2446), DEVICE_INTEL },	/* 82801BA */
+	{ PCI_VDEVICE(INTEL, 0x2486), DEVICE_INTEL },	/* ICH3 */
+	{ PCI_VDEVICE(INTEL, 0x24c6), DEVICE_INTEL }, /* ICH4 */
+	{ PCI_VDEVICE(INTEL, 0x24d6), DEVICE_INTEL }, /* ICH5 */
+	{ PCI_VDEVICE(INTEL, 0x266d), DEVICE_INTEL },	/* ICH6 */
+	{ PCI_VDEVICE(INTEL, 0x27dd), DEVICE_INTEL },	/* ICH7 */
+	{ PCI_VDEVICE(INTEL, 0x7196), DEVICE_INTEL },	/* 440MX */
+	{ PCI_VDEVICE(AMD, 0x7446), DEVICE_INTEL },	/* AMD768 */
+	{ PCI_VDEVICE(SI, 0x7013), DEVICE_SIS },	/* SI7013 */
+	{ PCI_VDEVICE(NVIDIA, 0x01c1), DEVICE_NFORCE }, /* NFORCE */
+	{ PCI_VDEVICE(NVIDIA, 0x0069), DEVICE_NFORCE }, /* NFORCE2 */
+	{ PCI_VDEVICE(NVIDIA, 0x0089), DEVICE_NFORCE }, /* NFORCE2s */
+	{ PCI_VDEVICE(NVIDIA, 0x00d9), DEVICE_NFORCE }, /* NFORCE3 */
 #if 0
-	{ 0x1022, 0x746d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* AMD8111 */
-	{ 0x10b9, 0x5455, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALI },   /* Ali5455 */
+	{ PCI_VDEVICE(AMD, 0x746d), DEVICE_INTEL },	/* AMD8111 */
+	{ PCI_VDEVICE(AL, 0x5455), DEVICE_ALI },   /* Ali5455 */
 #endif
 	{ 0, }
 };
diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c
index 18da2ef04d0..11b8c6514b3 100644
--- a/sound/pci/lx6464es/lx6464es.c
+++ b/sound/pci/lx6464es/lx6464es.c
@@ -654,13 +654,12 @@ static int __devinit lx_init_ethersound_config(struct lx6464es *chip)
 	int i;
 	u32 orig_conf_es = lx_dsp_reg_read(chip, eReg_CONFES);
 
-	u32 default_conf_es = (64 << IOCR_OUTPUTS_OFFSET) |
+	/* configure 64 io channels */
+	u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK) |
 		(64 << IOCR_INPUTS_OFFSET) |
+		(64 << IOCR_OUTPUTS_OFFSET) |
 		(FREQ_RATIO_SINGLE_MODE << FREQ_RATIO_OFFSET);
 
-	u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK)
-		| (default_conf_es & CONFES_WRITE_PART_MASK);
-
 	snd_printdd("->lx_init_ethersound\n");
 
 	chip->freq_ratio = FREQ_RATIO_SINGLE_MODE;
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index 82bc5b9e762..a83d1968a84 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -61,7 +61,7 @@ MODULE_PARM_DESC(enable, "Enable Digigram " CARD_NAME " soundcard.");
  */
 
 static struct pci_device_id snd_mixart_ids[] = {
-	{ 0x1057, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* MC8240 */
+	{ PCI_VDEVICE(MOTOROLA, 0x0003), 0, }, /* MC8240 */
 	{ 0, }
 };
 
diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c
index 522a040855d..97a0731331a 100644
--- a/sound/pci/nm256/nm256.c
+++ b/sound/pci/nm256/nm256.c
@@ -263,9 +263,9 @@ struct nm256 {
  * PCI ids
  */
 static struct pci_device_id snd_nm256_ids[] = {
-	{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO), 0},
+	{PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO), 0},
+	{PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO), 0},
 	{0,},
 };
 
diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c
index 312251d3969..9a8936e2074 100644
--- a/sound/pci/oxygen/oxygen_lib.c
+++ b/sound/pci/oxygen/oxygen_lib.c
@@ -260,6 +260,9 @@ oxygen_search_pci_id(struct oxygen *chip, const struct pci_device_id ids[])
 	 * chip didn't if the first EEPROM word was overwritten.
 	 */
 	subdevice = oxygen_read_eeprom(chip, 2);
+	/* use default ID if EEPROM is missing */
+	if (subdevice == 0xffff)
+		subdevice = 0x8788;
 	/*
 	 * We use only the subsystem device ID for searching because it is
 	 * unique even without the subsystem vendor ID, which may have been
diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c
index 304da169bfd..5401c547c4e 100644
--- a/sound/pci/oxygen/oxygen_mixer.c
+++ b/sound/pci/oxygen/oxygen_mixer.c
@@ -575,8 +575,10 @@ static int ac97_switch_put(struct snd_kcontrol *ctl,
 static int ac97_volume_info(struct snd_kcontrol *ctl,
 			    struct snd_ctl_elem_info *info)
 {
+	int stereo = (ctl->private_value >> 16) & 1;
+
 	info->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-	info->count = 2;
+	info->count = stereo ? 2 : 1;
 	info->value.integer.min = 0;
 	info->value.integer.max = 0x1f;
 	return 0;
@@ -587,6 +589,7 @@ static int ac97_volume_get(struct snd_kcontrol *ctl,
 {
 	struct oxygen *chip = ctl->private_data;
 	unsigned int codec = (ctl->private_value >> 24) & 1;
+	int stereo = (ctl->private_value >> 16) & 1;
 	unsigned int index = ctl->private_value & 0xff;
 	u16 reg;
 
@@ -594,7 +597,8 @@ static int ac97_volume_get(struct snd_kcontrol *ctl,
 	reg = oxygen_read_ac97(chip, codec, index);
 	mutex_unlock(&chip->mutex);
 	value->value.integer.value[0] = 31 - (reg & 0x1f);
-	value->value.integer.value[1] = 31 - ((reg >> 8) & 0x1f);
+	if (stereo)
+		value->value.integer.value[1] = 31 - ((reg >> 8) & 0x1f);
 	return 0;
 }
 
@@ -603,6 +607,7 @@ static int ac97_volume_put(struct snd_kcontrol *ctl,
 {
 	struct oxygen *chip = ctl->private_data;
 	unsigned int codec = (ctl->private_value >> 24) & 1;
+	int stereo = (ctl->private_value >> 16) & 1;
 	unsigned int index = ctl->private_value & 0xff;
 	u16 oldreg, newreg;
 	int change;
@@ -612,8 +617,11 @@ static int ac97_volume_put(struct snd_kcontrol *ctl,
 	newreg = oldreg;
 	newreg = (newreg & ~0x1f) |
 		(31 - (value->value.integer.value[0] & 0x1f));
-	newreg = (newreg & ~0x1f00) |
-		((31 - (value->value.integer.value[0] & 0x1f)) << 8);
+	if (stereo)
+		newreg = (newreg & ~0x1f00) |
+			((31 - (value->value.integer.value[1] & 0x1f)) << 8);
+	else
+		newreg = (newreg & ~0x1f00) | ((newreg & 0x1f) << 8);
 	change = newreg != oldreg;
 	if (change)
 		oxygen_write_ac97(chip, codec, index, newreg);
@@ -673,7 +681,7 @@ static int ac97_fp_rec_volume_put(struct snd_kcontrol *ctl,
 		.private_value = ((codec) << 24) | ((invert) << 16) | \
 				 ((bitnr) << 8) | (index), \
 	}
-#define AC97_VOLUME(xname, codec, index) { \
+#define AC97_VOLUME(xname, codec, index, stereo) { \
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
 		.name = xname, \
 		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
@@ -682,7 +690,7 @@ static int ac97_fp_rec_volume_put(struct snd_kcontrol *ctl,
 		.get = ac97_volume_get, \
 		.put = ac97_volume_put, \
 		.tlv = { .p = ac97_db_scale, }, \
-		.private_value = ((codec) << 24) | (index), \
+		.private_value = ((codec) << 24) | ((stereo) << 16) | (index), \
 	}
 
 static DECLARE_TLV_DB_SCALE(monitor_db_scale, -1000, 1000, 0);
@@ -882,18 +890,18 @@ static const struct {
 };
 
 static const struct snd_kcontrol_new ac97_controls[] = {
-	AC97_VOLUME("Mic Capture Volume", 0, AC97_MIC),
+	AC97_VOLUME("Mic Capture Volume", 0, AC97_MIC, 0),
 	AC97_SWITCH("Mic Capture Switch", 0, AC97_MIC, 15, 1),
 	AC97_SWITCH("Mic Boost (+20dB)", 0, AC97_MIC, 6, 0),
 	AC97_SWITCH("Line Capture Switch", 0, AC97_LINE, 15, 1),
-	AC97_VOLUME("CD Capture Volume", 0, AC97_CD),
+	AC97_VOLUME("CD Capture Volume", 0, AC97_CD, 1),
 	AC97_SWITCH("CD Capture Switch", 0, AC97_CD, 15, 1),
-	AC97_VOLUME("Aux Capture Volume", 0, AC97_AUX),
+	AC97_VOLUME("Aux Capture Volume", 0, AC97_AUX, 1),
 	AC97_SWITCH("Aux Capture Switch", 0, AC97_AUX, 15, 1),
 };
 
 static const struct snd_kcontrol_new ac97_fp_controls[] = {
-	AC97_VOLUME("Front Panel Playback Volume", 1, AC97_HEADPHONE),
+	AC97_VOLUME("Front Panel Playback Volume", 1, AC97_HEADPHONE, 1),
 	AC97_SWITCH("Front Panel Playback Switch", 1, AC97_HEADPHONE, 15, 1),
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
diff --git a/sound/pci/oxygen/oxygen_pcm.c b/sound/pci/oxygen/oxygen_pcm.c
index 3b5ca70c9d4..ef2345d82b8 100644
--- a/sound/pci/oxygen/oxygen_pcm.c
+++ b/sound/pci/oxygen/oxygen_pcm.c
@@ -469,9 +469,11 @@ static int oxygen_multich_hw_params(struct snd_pcm_substream *substream,
 	oxygen_write16_masked(chip, OXYGEN_I2S_MULTICH_FORMAT,
 			      oxygen_rate(hw_params) |
 			      chip->model.dac_i2s_format |
+			      oxygen_i2s_mclk(hw_params) |
 			      oxygen_i2s_bits(hw_params),
 			      OXYGEN_I2S_RATE_MASK |
 			      OXYGEN_I2S_FORMAT_MASK |
+			      OXYGEN_I2S_MCLK_MASK |
 			      OXYGEN_I2S_BITS_MASK);
 	oxygen_update_dac_routing(chip);
 	oxygen_update_spdif_source(chip);
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index bf971f7cfdc..6ebcb6bdd71 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -635,6 +635,8 @@ static void xonar_d2_resume(struct oxygen *chip)
 
 static void xonar_d1_resume(struct oxygen *chip)
 {
+	oxygen_set_bits8(chip, OXYGEN_FUNCTION, OXYGEN_FUNCTION_RESET_CODEC);
+	msleep(1);
 	cs43xx_init(chip);
 	xonar_enable_output(chip);
 }
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 235a71e5ac8..b5ca02e2038 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -2197,9 +2197,12 @@ static int __init alsa_card_riptide_init(void)
 	if (err < 0)
 		return err;
 #if defined(SUPPORT_JOYSTICK)
-	pci_register_driver(&joystick_driver);
+	err = pci_register_driver(&joystick_driver);
+	/* On failure unregister formerly registered audio driver */
+	if (err < 0)
+		pci_unregister_driver(&driver);
 #endif
-	return 0;
+	return err;
 }
 
 static void __exit alsa_card_riptide_exit(void)
diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c
index d7b966e7c4c..f977dba7cbd 100644
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -227,12 +227,9 @@ struct rme32 {
 };
 
 static struct pci_device_id snd_rme32_ids[] = {
-	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
-	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
-	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_PRO,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+	{PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32), 0,},
+	{PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8), 0,},
+	{PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_PRO), 0,},
 	{0,}
 };
 
diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c
index 55fb1c131f5..2ba5c0fd55d 100644
--- a/sound/pci/rme96.c
+++ b/sound/pci/rme96.c
@@ -232,14 +232,10 @@ struct rme96 {
 };
 
 static struct pci_device_id snd_rme96_ids[] = {
-	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96,
-	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
-	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8,
-	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
-	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PRO,
-	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
-	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST,
-	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, 
+	{ PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96), 0, },
+	{ PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8), 0, },
+	{ PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PRO), 0, },
+	{ PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST), 0, },
 	{ 0, }
 };
 
diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c
index 7dc60ad4772..1f6406c4534 100644
--- a/sound/pci/sonicvibes.c
+++ b/sound/pci/sonicvibes.c
@@ -243,7 +243,7 @@ struct sonicvibes {
 };
 
 static struct pci_device_id snd_sonic_ids[] = {
-	{ 0x5333, 0xca00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
+	{ PCI_VDEVICE(S3, 0xca00), 0, },
         { 0, }
 };
 
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 949fcaf6b70..acfa4760da4 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -402,9 +402,9 @@ struct via82xx {
 
 static struct pci_device_id snd_via82xx_ids[] = {
 	/* 0x1106, 0x3058 */
-	{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA686, },	/* 686A */
+	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C686_5), TYPE_CARD_VIA686, },	/* 686A */
 	/* 0x1106, 0x3059 */
-	{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA8233, },	/* VT8233 */
+	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233_5), TYPE_CARD_VIA8233, },	/* VT8233 */
 	{ 0, }
 };
 
diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c
index 0d54e3503c1..47eb61561df 100644
--- a/sound/pci/via82xx_modem.c
+++ b/sound/pci/via82xx_modem.c
@@ -261,7 +261,7 @@ struct via82xx_modem {
 };
 
 static struct pci_device_id snd_via82xx_modem_ids[] = {
-	{ 0x1106, 0x3068, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA82XX_MODEM, },
+	{ PCI_VDEVICE(VIA, 0x3068), TYPE_CARD_VIA82XX_MODEM, },
 	{ 0, }
 };
 
diff --git a/sound/pci/vx222/vx222_ops.c b/sound/pci/vx222/vx222_ops.c
index 6416d3f0c7b..a69e774d0b1 100644
--- a/sound/pci/vx222/vx222_ops.c
+++ b/sound/pci/vx222/vx222_ops.c
@@ -885,10 +885,10 @@ static int vx_input_level_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem
 	struct vx_core *_chip = snd_kcontrol_chip(kcontrol);
 	struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
 	if (ucontrol->value.integer.value[0] < 0 ||
-	    ucontrol->value.integer.value[0] < MIC_LEVEL_MAX)
+	    ucontrol->value.integer.value[0] > MIC_LEVEL_MAX)
 		return -EINVAL;
 	if (ucontrol->value.integer.value[1] < 0 ||
-	    ucontrol->value.integer.value[1] < MIC_LEVEL_MAX)
+	    ucontrol->value.integer.value[1] > MIC_LEVEL_MAX)
 		return -EINVAL;
 	mutex_lock(&_chip->mixer_mutex);
 	if (chip->input_level[0] != ucontrol->value.integer.value[0] ||
diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c
index 4af66661f9b..e6b18b90d45 100644
--- a/sound/pci/ymfpci/ymfpci.c
+++ b/sound/pci/ymfpci/ymfpci.c
@@ -67,12 +67,12 @@ module_param_array(rear_switch, bool, NULL, 0444);
 MODULE_PARM_DESC(rear_switch, "Enable shared rear/line-in switch");
 
 static struct pci_device_id snd_ymfpci_ids[] = {
-        { 0x1073, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF724 */
-        { 0x1073, 0x000d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF724F */
-        { 0x1073, 0x000a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF740 */
-        { 0x1073, 0x000c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF740C */
-        { 0x1073, 0x0010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF744 */
-        { 0x1073, 0x0012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF754 */
+	{ PCI_VDEVICE(YAMAHA, 0x0004), 0, },   /* YMF724 */
+	{ PCI_VDEVICE(YAMAHA, 0x000d), 0, },   /* YMF724F */
+	{ PCI_VDEVICE(YAMAHA, 0x000a), 0, },   /* YMF740 */
+	{ PCI_VDEVICE(YAMAHA, 0x000c), 0, },   /* YMF740C */
+	{ PCI_VDEVICE(YAMAHA, 0x0010), 0, },   /* YMF744 */
+	{ PCI_VDEVICE(YAMAHA, 0x0012), 0, },   /* YMF754 */
 	{ 0, }
 };
 
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
index 6f15acd1048..f9c3b80da5d 100644
--- a/sound/soc/codecs/wm8988.c
+++ b/sound/soc/codecs/wm8988.c
@@ -1056,14 +1056,14 @@ static int __devinit wm8988_spi_probe(struct spi_device *spi)
 	codec->control_data = spi;
 	codec->dev = &spi->dev;
 
-	spi->dev.driver_data = wm8988;
+	dev_set_drvdata(&spi->dev, wm8988);
 
 	return wm8988_register(wm8988);
 }
 
 static int __devexit wm8988_spi_remove(struct spi_device *spi)
 {
-	struct wm8988_priv *wm8988 = spi->dev.driver_data;
+	struct wm8988_priv *wm8988 = dev_get_drvdata(&spi->dev);
 
 	wm8988_unregister(wm8988);
 
diff --git a/sound/soc/fsl/efika-audio-fabric.c b/sound/soc/fsl/efika-audio-fabric.c
index 85b0e756950..3326e2a1e86 100644
--- a/sound/soc/fsl/efika-audio-fabric.c
+++ b/sound/soc/fsl/efika-audio-fabric.c
@@ -30,6 +30,8 @@
 #include "mpc5200_psc_ac97.h"
 #include "../codecs/stac9766.h"
 
+#define DRV_NAME "efika-audio-fabric"
+
 static struct snd_soc_device device;
 static struct snd_soc_card card;
 
diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c
index 8766f7a3893..b928ef7d28e 100644
--- a/sound/soc/fsl/pcm030-audio-fabric.c
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -30,6 +30,8 @@
 #include "mpc5200_psc_ac97.h"
 #include "../codecs/wm9712.h"
 
+#define DRV_NAME "pcm030-audio-fabric"
+
 static struct snd_soc_device device;
 static struct snd_soc_card card;
 
diff --git a/sound/sound_core.c b/sound/sound_core.c
index 12522e6913d..a41f8b127f4 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -10,6 +10,8 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/err.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
 #include <sound/core.h>
 
 #ifdef CONFIG_SOUND_OSS_CORE
@@ -29,6 +31,8 @@ MODULE_LICENSE("GPL");
 
 static char *sound_nodename(struct device *dev)
 {
+	if (MAJOR(dev->devt) == SOUND_MAJOR)
+		return NULL;
 	return kasprintf(GFP_KERNEL, "snd/%s", dev_name(dev));
 }
 
@@ -104,7 +108,6 @@ module_exit(cleanup_soundcore);
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sound.h>
-#include <linux/major.h>
 #include <linux/kmod.h>
 
 #define SOUND_STEP 16
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index 523aec188cc..73525c048e7 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -48,6 +48,7 @@ config SND_USB_CAIAQ
 	    * Native Instruments Kore Controller
 	    * Native Instruments Kore Controller 2
 	    * Native Instruments Audio Kontrol 1
+	    * Native Instruments Audio 2 DJ
 	    * Native Instruments Audio 4 DJ
 	    * Native Instruments Audio 8 DJ
 	    * Native Instruments Guitar Rig Session I/O
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index 8f9b60c5d74..121af0644fd 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -646,6 +646,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_GUITARRIGMOBILE):
 		dev->samplerates |= SNDRV_PCM_RATE_192000;
 		/* fall thru */
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO2DJ):
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
 		dev->samplerates |= SNDRV_PCM_RATE_88200;
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index 0e5db719de2..83e6c1312d4 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -35,13 +35,14 @@
 #include "input.h"
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.17");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.19");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
 			 "{Native Instruments, RigKontrol3},"
 			 "{Native Instruments, Kore Controller},"
 			 "{Native Instruments, Kore Controller 2},"
 			 "{Native Instruments, Audio Kontrol 1},"
+			 "{Native Instruments, Audio 2 DJ},"
 			 "{Native Instruments, Audio 4 DJ},"
 			 "{Native Instruments, Audio 8 DJ},"
 			 "{Native Instruments, Session I/O},"
@@ -121,6 +122,11 @@ static struct usb_device_id snd_usb_id_table[] = {
 		.idVendor =     USB_VID_NATIVEINSTRUMENTS,
 		.idProduct =    USB_PID_AUDIO4DJ
 	},
+	{
+		.match_flags =  USB_DEVICE_ID_MATCH_DEVICE,
+		.idVendor =     USB_VID_NATIVEINSTRUMENTS,
+		.idProduct =    USB_PID_AUDIO2DJ
+	},
 	{ /* terminator */ }
 };
 
@@ -349,7 +355,9 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
 		log("Unable to set up control system (ret=%d)\n", ret);
 }
 
-static int create_card(struct usb_device* usb_dev, struct snd_card **cardp)
+static int create_card(struct usb_device *usb_dev,
+		       struct usb_interface *intf,
+		       struct snd_card **cardp)
 {
 	int devnum;
 	int err;
@@ -374,7 +382,7 @@ static int create_card(struct usb_device* usb_dev, struct snd_card **cardp)
 	dev->chip.usb_id = USB_ID(le16_to_cpu(usb_dev->descriptor.idVendor),
 				  le16_to_cpu(usb_dev->descriptor.idProduct));
 	spin_lock_init(&dev->spinlock);
-	snd_card_set_dev(card, &usb_dev->dev);
+	snd_card_set_dev(card, &intf->dev);
 
 	*cardp = card;
 	return 0;
@@ -461,7 +469,7 @@ static int __devinit snd_probe(struct usb_interface *intf,
 	struct snd_card *card;
 	struct usb_device *device = interface_to_usbdev(intf);
 
-	ret = create_card(device, &card);
+	ret = create_card(device, intf, &card);
 
 	if (ret < 0)
 		return ret;
diff --git a/sound/usb/caiaq/device.h b/sound/usb/caiaq/device.h
index ece73514854..44e3edf88be 100644
--- a/sound/usb/caiaq/device.h
+++ b/sound/usb/caiaq/device.h
@@ -10,6 +10,7 @@
 #define USB_PID_KORECONTROLLER	0x4711
 #define USB_PID_KORECONTROLLER2	0x4712
 #define USB_PID_AK1		0x0815
+#define USB_PID_AUDIO2DJ	0x041c
 #define USB_PID_AUDIO4DJ	0x0839
 #define USB_PID_AUDIO8DJ	0x1978
 #define USB_PID_SESSIONIO	0x1915
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index c7b902358b7..44b9cdc8a83 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -2661,7 +2661,7 @@ static int parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
 	struct usb_interface_descriptor *altsd;
 	int i, altno, err, stream;
 	int format;
-	struct audioformat *fp;
+	struct audioformat *fp = NULL;
 	unsigned char *fmt, *csep;
 	int num;
 
@@ -2734,6 +2734,18 @@ static int parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
 			continue;
 		}
 
+		/*
+		 * Blue Microphones workaround: The last altsetting is identical
+		 * with the previous one, except for a larger packet size, but
+		 * is actually a mislabeled two-channel setting; ignore it.
+		 */
+		if (fmt[4] == 1 && fmt[5] == 2 && altno == 2 && num == 3 &&
+		    fp && fp->altsetting == 1 && fp->channels == 1 &&
+		    fp->format == SNDRV_PCM_FORMAT_S16_LE &&
+		    le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) ==
+							fp->maxpacksize * 2)
+			continue;
+
 		csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT);
 		/* Creamware Noah has this descriptor after the 2nd endpoint */
 		if (!csep && altsd->bNumEndpoints >= 2)
diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
index 4bd3a7a0edc..ec9cdf98692 100644
--- a/sound/usb/usbmixer.c
+++ b/sound/usb/usbmixer.c
@@ -990,20 +990,35 @@ static void build_feature_ctl(struct mixer_build *state, unsigned char *desc,
 		break;
 	}
 
-	/* quirk for UDA1321/N101 */
-	/* note that detection between firmware 2.1.1.7 (N101) and later 2.1.1.21 */
-	/* is not very clear from datasheets */
-	/* I hope that the min value is -15360 for newer firmware --jk */
+	/* volume control quirks */
 	switch (state->chip->usb_id) {
 	case USB_ID(0x0471, 0x0101):
 	case USB_ID(0x0471, 0x0104):
 	case USB_ID(0x0471, 0x0105):
 	case USB_ID(0x0672, 0x1041):
+	/* quirk for UDA1321/N101.
+	 * note that detection between firmware 2.1.1.7 (N101)
+	 * and later 2.1.1.21 is not very clear from datasheets.
+	 * I hope that the min value is -15360 for newer firmware --jk
+	 */
 		if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
 		    cval->min == -15616) {
-			snd_printk(KERN_INFO "using volume control quirk for the UDA1321/N101 chip\n");
+			snd_printk(KERN_INFO
+				 "set volume quirk for UDA1321/N101 chip\n");
 			cval->max = -256;
 		}
+		break;
+
+	case USB_ID(0x046d, 0x09a4):
+		if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+			snd_printk(KERN_INFO
+				"set volume quirk for QuickCam E3500\n");
+			cval->min = 6080;
+			cval->max = 8768;
+			cval->res = 192;
+		}
+		break;
+
 	}
 
 	snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n",
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index a5aae9d67f3..fd44946ce4b 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -514,7 +514,6 @@ static int usx2y_create_card(struct usb_device *device, struct snd_card **cardp)
 		US122L(card)->chip.dev->bus->busnum,
 		US122L(card)->chip.dev->devnum
 		);
-	snd_card_set_dev(card, &device->dev);
 	*cardp = card;
 	return 0;
 }
@@ -531,6 +530,7 @@ static int us122l_usb_probe(struct usb_interface *intf,
 	if (err < 0)
 		return err;
 
+	snd_card_set_dev(card, &intf->dev);
 	if (!us122l_create_card(card)) {
 		snd_card_free(card);
 		return -EINVAL;
diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c
index 5ce0da23ee9..cb4bb8373ca 100644
--- a/sound/usb/usx2y/usbusx2y.c
+++ b/sound/usb/usx2y/usbusx2y.c
@@ -364,7 +364,6 @@ static int usX2Y_create_card(struct usb_device *device, struct snd_card **cardp)
 		0,//us428(card)->usbmidi.ifnum,
 		usX2Y(card)->chip.dev->bus->busnum, usX2Y(card)->chip.dev->devnum
 		);
-	snd_card_set_dev(card, &device->dev);
 	*cardp = card;
 	return 0;
 }
@@ -388,6 +387,7 @@ static int usX2Y_usb_probe(struct usb_device *device,
 	err = usX2Y_create_card(device, &card);
 	if (err < 0)
 		return err;
+	snd_card_set_dev(card, &intf->dev);
 	if ((err = usX2Y_hwdep_new(card, device)) < 0  ||
 	    (err = snd_card_register(card)) < 0) {
 		snd_card_free(card);
diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c
index dd1ab617784..9efd27f6b52 100644
--- a/sound/usb/usx2y/usbusx2yaudio.c
+++ b/sound/usb/usx2y/usbusx2yaudio.c
@@ -296,9 +296,10 @@ static void usX2Y_error_urb_status(struct usX2Ydev *usX2Y,
 static void usX2Y_error_sequence(struct usX2Ydev *usX2Y,
 				 struct snd_usX2Y_substream *subs, struct urb *urb)
 {
-	snd_printk(KERN_ERR "Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n"
-		   KERN_ERR "Most propably some urb of usb-frame %i is still missing.\n"
-		   KERN_ERR "Cause could be too long delays in usb-hcd interrupt handling.\n",
+	snd_printk(KERN_ERR
+"Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n"
+"Most propably some urb of usb-frame %i is still missing.\n"
+"Cause could be too long delays in usb-hcd interrupt handling.\n",
 		   usb_get_current_frame_number(usX2Y->chip.dev),
 		   subs->endpoint, usb_pipein(urb->pipe) ? "in" : "out",
 		   usX2Y->wait_iso_frame, urb->start_frame, usX2Y->wait_iso_frame);
diff --git a/tools/perf/CREDITS b/tools/perf/CREDITS
new file mode 100644
index 00000000000..c2ddcb3acbd
--- /dev/null
+++ b/tools/perf/CREDITS
@@ -0,0 +1,30 @@
+Most of the infrastructure that 'perf' uses here has been reused
+from the Git project, as of version:
+
+    66996ec: Sync with 1.6.2.4
+
+Here is an (incomplete!) list of main contributors to those files
+in util/* and elsewhere:
+
+ Alex Riesen
+ Christian Couder
+ Dmitry Potapov
+ Jeff King
+ Johannes Schindelin
+ Johannes Sixt
+ Junio C Hamano
+ Linus Torvalds
+ Matthias Kestenholz
+ Michal Ostrowski
+ Miklos Vajna
+ Petr Baudis
+ Pierre Habouzit
+ René Scharfe
+ Samuel Tardieu
+ Shawn O. Pearce
+ Steffen Prohaska
+ Steve Haslam
+
+Thanks guys!
+
+The full history of the files can be found in the upstream Git commits.
diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile
index 5457192e1b4..bdd3b7ecad0 100644
--- a/tools/perf/Documentation/Makefile
+++ b/tools/perf/Documentation/Makefile
@@ -35,7 +35,7 @@ man7dir=$(mandir)/man7
 # DESTDIR=
 
 ASCIIDOC=asciidoc
-ASCIIDOC_EXTRA =
+ASCIIDOC_EXTRA = --unsafe
 MANPAGE_XSL = manpage-normal.xsl
 XMLTO_EXTRA =
 INSTALL?=install
diff --git a/tools/perf/Documentation/examples.txt b/tools/perf/Documentation/examples.txt
new file mode 100644
index 00000000000..8eb6c489fb1
--- /dev/null
+++ b/tools/perf/Documentation/examples.txt
@@ -0,0 +1,225 @@
+
+		------------------------------
+		****** perf by examples ******
+		------------------------------
+
+[ From an e-mail by Ingo Molnar, http://lkml.org/lkml/2009/8/4/346 ]
+
+
+First, discovery/enumeration of available counters can be done via
+'perf list':
+
+titan:~> perf list
+  [...]
+  kmem:kmalloc                             [Tracepoint event]
+  kmem:kmem_cache_alloc                    [Tracepoint event]
+  kmem:kmalloc_node                        [Tracepoint event]
+  kmem:kmem_cache_alloc_node               [Tracepoint event]
+  kmem:kfree                               [Tracepoint event]
+  kmem:kmem_cache_free                     [Tracepoint event]
+  kmem:mm_page_free_direct                 [Tracepoint event]
+  kmem:mm_pagevec_free                     [Tracepoint event]
+  kmem:mm_page_alloc                       [Tracepoint event]
+  kmem:mm_page_alloc_zone_locked           [Tracepoint event]
+  kmem:mm_page_pcpu_drain                  [Tracepoint event]
+  kmem:mm_page_alloc_extfrag               [Tracepoint event]
+
+Then any (or all) of the above event sources can be activated and
+measured. For example the page alloc/free properties of a 'hackbench
+run' are:
+
+ titan:~> perf stat -e kmem:mm_page_pcpu_drain -e kmem:mm_page_alloc
+ -e kmem:mm_pagevec_free -e kmem:mm_page_free_direct ./hackbench 10
+ Time: 0.575
+
+ Performance counter stats for './hackbench 10':
+
+          13857  kmem:mm_page_pcpu_drain
+          27576  kmem:mm_page_alloc
+           6025  kmem:mm_pagevec_free
+          20934  kmem:mm_page_free_direct
+
+    0.613972165  seconds time elapsed
+
+You can observe the statistical properties as well, by using the
+'repeat the workload N times' feature of perf stat:
+
+ titan:~> perf stat --repeat 5 -e kmem:mm_page_pcpu_drain -e
+   kmem:mm_page_alloc -e kmem:mm_pagevec_free -e
+   kmem:mm_page_free_direct ./hackbench 10
+ Time: 0.627
+ Time: 0.644
+ Time: 0.564
+ Time: 0.559
+ Time: 0.626
+
+ Performance counter stats for './hackbench 10' (5 runs):
+
+          12920  kmem:mm_page_pcpu_drain    ( +-   3.359% )
+          25035  kmem:mm_page_alloc         ( +-   3.783% )
+           6104  kmem:mm_pagevec_free       ( +-   0.934% )
+          18376  kmem:mm_page_free_direct   ( +-   4.941% )
+
+    0.643954516  seconds time elapsed   ( +-   2.363% )
+
+Furthermore, these tracepoints can be used to sample the workload as
+well. For example the page allocations done by a 'git gc' can be
+captured the following way:
+
+ titan:~/git> perf record -f -e kmem:mm_page_alloc -c 1 ./git gc
+ Counting objects: 1148, done.
+ Delta compression using up to 2 threads.
+ Compressing objects: 100% (450/450), done.
+ Writing objects: 100% (1148/1148), done.
+ Total 1148 (delta 690), reused 1148 (delta 690)
+ [ perf record: Captured and wrote 0.267 MB perf.data (~11679 samples) ]
+
+To check which functions generated page allocations:
+
+ titan:~/git> perf report
+ # Samples: 10646
+ #
+ # Overhead          Command               Shared Object
+ # ........  ...............  ..........................
+ #
+    23.57%       git-repack  /lib64/libc-2.5.so
+    21.81%              git  /lib64/libc-2.5.so
+    14.59%              git  ./git
+    11.79%       git-repack  ./git
+     7.12%              git  /lib64/ld-2.5.so
+     3.16%       git-repack  /lib64/libpthread-2.5.so
+     2.09%       git-repack  /bin/bash
+     1.97%               rm  /lib64/libc-2.5.so
+     1.39%               mv  /lib64/ld-2.5.so
+     1.37%               mv  /lib64/libc-2.5.so
+     1.12%       git-repack  /lib64/ld-2.5.so
+     0.95%               rm  /lib64/ld-2.5.so
+     0.90%  git-update-serv  /lib64/libc-2.5.so
+     0.73%  git-update-serv  /lib64/ld-2.5.so
+     0.68%             perf  /lib64/libpthread-2.5.so
+     0.64%       git-repack  /usr/lib64/libz.so.1.2.3
+
+Or to see it on a more finegrained level:
+
+titan:~/git> perf report --sort comm,dso,symbol
+# Samples: 10646
+#
+# Overhead          Command               Shared Object  Symbol
+# ........  ...............  ..........................  ......
+#
+     9.35%       git-repack  ./git                       [.] insert_obj_hash
+     9.12%              git  ./git                       [.] insert_obj_hash
+     7.31%              git  /lib64/libc-2.5.so          [.] memcpy
+     6.34%       git-repack  /lib64/libc-2.5.so          [.] _int_malloc
+     6.24%       git-repack  /lib64/libc-2.5.so          [.] memcpy
+     5.82%       git-repack  /lib64/libc-2.5.so          [.] __GI___fork
+     5.47%              git  /lib64/libc-2.5.so          [.] _int_malloc
+     2.99%              git  /lib64/libc-2.5.so          [.] memset
+
+Furthermore, call-graph sampling can be done too, of page
+allocations - to see precisely what kind of page allocations there
+are:
+
+ titan:~/git> perf record -f -g -e kmem:mm_page_alloc -c 1 ./git gc
+ Counting objects: 1148, done.
+ Delta compression using up to 2 threads.
+ Compressing objects: 100% (450/450), done.
+ Writing objects: 100% (1148/1148), done.
+ Total 1148 (delta 690), reused 1148 (delta 690)
+ [ perf record: Captured and wrote 0.963 MB perf.data (~42069 samples) ]
+
+ titan:~/git> perf report -g
+ # Samples: 10686
+ #
+ # Overhead          Command               Shared Object
+ # ........  ...............  ..........................
+ #
+    23.25%       git-repack  /lib64/libc-2.5.so
+                |
+                |--50.00%-- _int_free
+                |
+                |--37.50%-- __GI___fork
+                |          make_child
+                |
+                |--12.50%-- ptmalloc_unlock_all2
+                |          make_child
+                |
+                 --6.25%-- __GI_strcpy
+    21.61%              git  /lib64/libc-2.5.so
+                |
+                |--30.00%-- __GI_read
+                |          |
+                |           --83.33%-- git_config_from_file
+                |                     git_config
+                |                     |
+   [...]
+
+Or you can observe the whole system's page allocations for 10
+seconds:
+
+titan:~/git> perf stat -a -e kmem:mm_page_pcpu_drain -e
+kmem:mm_page_alloc -e kmem:mm_pagevec_free -e
+kmem:mm_page_free_direct sleep 10
+
+ Performance counter stats for 'sleep 10':
+
+         171585  kmem:mm_page_pcpu_drain
+         322114  kmem:mm_page_alloc
+          73623  kmem:mm_pagevec_free
+         254115  kmem:mm_page_free_direct
+
+   10.000591410  seconds time elapsed
+
+Or observe how fluctuating the page allocations are, via statistical
+analysis done over ten 1-second intervals:
+
+ titan:~/git> perf stat --repeat 10 -a -e kmem:mm_page_pcpu_drain -e
+   kmem:mm_page_alloc -e kmem:mm_pagevec_free -e
+   kmem:mm_page_free_direct sleep 1
+
+ Performance counter stats for 'sleep 1' (10 runs):
+
+          17254  kmem:mm_page_pcpu_drain    ( +-   3.709% )
+          34394  kmem:mm_page_alloc         ( +-   4.617% )
+           7509  kmem:mm_pagevec_free       ( +-   4.820% )
+          25653  kmem:mm_page_free_direct   ( +-   3.672% )
+
+    1.058135029  seconds time elapsed   ( +-   3.089% )
+
+Or you can annotate the recorded 'git gc' run on a per symbol basis
+and check which instructions/source-code generated page allocations:
+
+ titan:~/git> perf annotate __GI___fork
+ ------------------------------------------------
+  Percent |      Source code & Disassembly of libc-2.5.so
+ ------------------------------------------------
+          :
+          :
+          :      Disassembly of section .plt:
+          :      Disassembly of section .text:
+          :
+          :      00000031a2e95560 <__fork>:
+ [...]
+     0.00 :        31a2e95602:   b8 38 00 00 00          mov    $0x38,%eax
+     0.00 :        31a2e95607:   0f 05                   syscall
+    83.42 :        31a2e95609:   48 3d 00 f0 ff ff       cmp    $0xfffffffffffff000,%rax
+     0.00 :        31a2e9560f:   0f 87 4d 01 00 00       ja     31a2e95762 <__fork+0x202>
+     0.00 :        31a2e95615:   85 c0                   test   %eax,%eax
+
+( this shows that 83.42% of __GI___fork's page allocations come from
+  the 0x38 system call it performs. )
+
+etc. etc. - a lot more is possible. I could list a dozen of
+other different usecases straight away - neither of which is
+possible via /proc/vmstat.
+
+/proc/vmstat is not in the same league really, in terms of
+expressive power of system analysis and performance
+analysis.
+
+All that the above results needed were those new tracepoints
+in include/tracing/events/kmem.h.
+
+	Ingo
+
+
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
index 1dbc1eeb4c0..6be696b0a2b 100644
--- a/tools/perf/Documentation/perf-record.txt
+++ b/tools/perf/Documentation/perf-record.txt
@@ -29,13 +29,67 @@ OPTIONS
 	Select the PMU event. Selection can be a symbolic event name
 	(use 'perf list' to list all events) or a raw PMU
 	event (eventsel+umask) in the form of rNNN where NNN is a
-	 hexadecimal event descriptor.
+	hexadecimal event descriptor.
 
 -a::
-        system-wide collection
+        System-wide collection.
 
 -l::
-        scale counter values
+        Scale counter values.
+
+-p::
+--pid=::
+	Record events on existing pid.
+
+-r::
+--realtime=::
+	Collect data with this RT SCHED_FIFO priority.
+-A::
+--append::
+	Append to the output file to do incremental profiling.
+
+-f::
+--force::
+	Overwrite existing data file.
+
+-c::
+--count=::
+	Event period to sample.
+
+-o::
+--output=::
+	Output file name.
+
+-i::
+--inherit::
+	Child tasks inherit counters.
+-F::
+--freq=::
+	Profile at this frequency.
+
+-m::
+--mmap-pages=::
+	Number of mmap data pages.
+
+-g::
+--call-graph::
+	Do call-graph (stack chain/backtrace) recording.
+
+-v::
+--verbose::
+	Be more verbose (show counter open errors, etc).
+
+-s::
+--stat::
+	Per thread counts.
+
+-d::
+--data::
+	Sample addresses.
+
+-n::
+--no-samples::
+	Don't sample.
 
 SEE ALSO
 --------
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index 52d3fc6846a..e72e9311078 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -13,13 +13,40 @@ SYNOPSIS
 DESCRIPTION
 -----------
 This command displays the performance counter profile information recorded
-via perf report.
+via perf record.
 
 OPTIONS
 -------
 -i::
 --input=::
         Input file name. (default: perf.data)
+-d::
+--dsos=::
+	Only consider symbols in these dsos. CSV that understands
+	file://filename entries.
+-n
+--show-nr-samples
+	Show the number of samples for each symbol
+-C::
+--comms=::
+	Only consider symbols in these comms. CSV that understands
+	file://filename entries.
+-S::
+--symbols=::
+	Only consider these symbols. CSV that understands
+	file://filename entries.
+
+-w::
+--field-width=::
+	Force each column width to the provided list, for large terminal
+	readability.
+
+-t::
+--field-separator=::
+
+	Use a special separator character and don't pad with spaces, replacing
+	all occurances of this separator in symbol names (and other output)
+	with a '.' character, that thus it's the only non valid separator.
 
 SEE ALSO
 --------
diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
index c368a72721d..484080dd5b6 100644
--- a/tools/perf/Documentation/perf-stat.txt
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -8,8 +8,8 @@ perf-stat - Run a command and gather performance counter statistics
 SYNOPSIS
 --------
 [verse]
-'perf stat' [-e <EVENT> | --event=EVENT] [-l] [-a] <command>
-'perf stat' [-e <EVENT> | --event=EVENT] [-l] [-a] -- <command> [<options>]
+'perf stat' [-e <EVENT> | --event=EVENT] [-S] [-a] <command>
+'perf stat' [-e <EVENT> | --event=EVENT] [-S] [-a] -- <command> [<options>]
 
 DESCRIPTION
 -----------
@@ -40,7 +40,7 @@ OPTIONS
 -a::
         system-wide collection
 
--l::
+-c::
         scale counter values
 
 EXAMPLES
diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt
index 539d0128972..4a7d558dc30 100644
--- a/tools/perf/Documentation/perf-top.txt
+++ b/tools/perf/Documentation/perf-top.txt
@@ -3,36 +3,122 @@ perf-top(1)
 
 NAME
 ----
-perf-top - Run a command and profile it
+perf-top - System profiling tool.
 
 SYNOPSIS
 --------
 [verse]
-'perf top' [-e <EVENT> | --event=EVENT] [-l] [-a] <command>
+'perf top' [-e <EVENT> | --event=EVENT] [<options>]
 
 DESCRIPTION
 -----------
-This command runs a command and gathers a performance counter profile
-from it.
+This command generates and displays a performance counter profile in realtime.
 
 
 OPTIONS
 -------
-<command>...::
-	Any command you can specify in a shell.
+-a::
+--all-cpus::
+        System-wide collection.  (default)
+
+-c <count>::
+--count=<count>::
+	Event period to sample.
+
+-C <cpu>::
+--CPU=<cpu>::
+	CPU to profile.
+
+-d <seconds>::
+--delay=<seconds>::
+	Number of seconds to delay between refreshes.
 
--e::
---event=::
+-e <event>::
+--event=<event>::
 	Select the PMU event. Selection can be a symbolic event name
 	(use 'perf list' to list all events) or a raw PMU
 	event (eventsel+umask) in the form of rNNN where NNN is a
-	 hexadecimal event descriptor.
+	hexadecimal event descriptor.
 
--a::
-        system-wide collection
+-E <entries>::
+--entries=<entries>::
+	Display this many functions.
+
+-f <count>::
+--count-filter=<count>::
+	Only display functions with more events than this.
+
+-F <freq>::
+--freq=<freq>::
+	Profile at this frequency.
+
+-i::
+--inherit::
+	Child tasks inherit counters, only makes sens with -p option.
+
+-k <path>::
+--vmlinux=<path>::
+	Path to vmlinux.  Required for annotation functionality.
+
+-m <pages>::
+--mmap-pages=<pages>::
+	Number of mmapped data pages.
+
+-p <pid>::
+--pid=<pid>::
+	Profile events on existing pid.
+
+-r <priority>::
+--realtime=<priority>::
+	Collect data with this RT SCHED_FIFO priority.
+
+-s <symbol>::
+--sym-annotate=<symbol>::
+        Annotate this symbol.  Requires -k option.
+
+-v::
+--verbose::
+	Be more verbose (show counter open errors, etc).
+
+-z::
+--zero::
+	Zero history across display updates.
+
+INTERACTIVE PROMPTING KEYS
+--------------------------
+
+[d]::
+	Display refresh delay.
+
+[e]::
+	Number of entries to display.
+
+[E]::
+	Event to display when multiple counters are active.
+
+[f]::
+	Profile display filter (>= hit count).
+
+[F]::
+	Annotation display filter (>= % of total).
+
+[s]::
+	Annotate symbol.
+
+[S]::
+	Stop annotation, return to full profile display.
+
+[w]::
+	Toggle between weighted sum and individual count[E]r profile.
+
+[z]::
+	Toggle event count zeroing across display updates.
+
+[qQ]::
+	Quit.
+
+Pressing any unmapped key displays a menu, and prompts for input.
 
--l::
-        scale counter values
 
 SEE ALSO
 --------
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 36d7eef4991..c045b4271e5 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -158,13 +158,15 @@ uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
 uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
 
 # If we're on a 64-bit kernel, use -m64
-ifneq ($(patsubst %64,%,$(uname_M)),$(uname_M))
-  M64 := -m64
+ifndef NO_64BIT
+	ifneq ($(patsubst %64,%,$(uname_M)),$(uname_M))
+	  M64 := -m64
+	endif
 endif
 
 # CFLAGS and LDFLAGS are for the users to override from the command line.
 
-CFLAGS = $(M64) -ggdb3 -Wall -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -std=gnu99 -Wdeclaration-after-statement -Werror -O6
+CFLAGS = $(M64) -ggdb3 -Wall -Wextra -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -std=gnu99 -Wdeclaration-after-statement -Werror -O6
 LDFLAGS = -lpthread -lrt -lelf -lm
 ALL_CFLAGS = $(CFLAGS)
 ALL_LDFLAGS = $(LDFLAGS)
@@ -223,7 +225,7 @@ SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
 # Those must not be GNU-specific; they are shared with perl/ which may
 # be built by a different compiler. (Note that this is an artifact now
 # but it still might be nice to keep that distinction.)
-BASIC_CFLAGS =
+BASIC_CFLAGS = -Iutil/include
 BASIC_LDFLAGS =
 
 # Guard against environment variables
@@ -289,10 +291,11 @@ export PERL_PATH
 LIB_FILE=libperf.a
 
 LIB_H += ../../include/linux/perf_counter.h
+LIB_H += ../../include/linux/rbtree.h
+LIB_H += ../../include/linux/list.h
+LIB_H += util/include/linux/list.h
 LIB_H += perf.h
-LIB_H += types.h
-LIB_H += util/list.h
-LIB_H += util/rbtree.h
+LIB_H += util/types.h
 LIB_H += util/levenshtein.h
 LIB_H += util/parse-options.h
 LIB_H += util/parse-events.h
@@ -301,9 +304,11 @@ LIB_H += util/util.h
 LIB_H += util/help.h
 LIB_H += util/strbuf.h
 LIB_H += util/string.h
+LIB_H += util/strlist.h
 LIB_H += util/run-command.h
 LIB_H += util/sigchain.h
 LIB_H += util/symbol.h
+LIB_H += util/module.h
 LIB_H += util/color.h
 
 LIB_OBJS += util/abspath.o
@@ -322,12 +327,16 @@ LIB_OBJS += util/run-command.o
 LIB_OBJS += util/quote.o
 LIB_OBJS += util/strbuf.o
 LIB_OBJS += util/string.o
+LIB_OBJS += util/strlist.o
 LIB_OBJS += util/usage.o
 LIB_OBJS += util/wrapper.o
 LIB_OBJS += util/sigchain.o
 LIB_OBJS += util/symbol.o
+LIB_OBJS += util/module.o
 LIB_OBJS += util/color.o
 LIB_OBJS += util/pager.o
+LIB_OBJS += util/header.o
+LIB_OBJS += util/callchain.o
 
 BUILTIN_OBJS += builtin-annotate.o
 BUILTIN_OBJS += builtin-help.o
@@ -338,7 +347,6 @@ BUILTIN_OBJS += builtin-stat.o
 BUILTIN_OBJS += builtin-top.o
 
 PERFLIBS = $(LIB_FILE)
-EXTLIBS =
 
 #
 # Platform specific tweaks
@@ -367,6 +375,39 @@ ifeq ($(uname_S),Darwin)
 	PTHREAD_LIBS =
 endif
 
+ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y)
+	msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel);
+endif
+
+ifdef NO_DEMANGLE
+	BASIC_CFLAGS += -DNO_DEMANGLE
+else
+	has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -lbfd > /dev/null 2>&1 && echo y")
+
+	ifeq ($(has_bfd),y)
+		EXTLIBS += -lbfd
+	else
+		has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -lbfd -liberty > /dev/null 2>&1 && echo y")
+		ifeq ($(has_bfd_iberty),y)
+			EXTLIBS += -lbfd -liberty
+		else
+			has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -lbfd -liberty -lz > /dev/null 2>&1 && echo y")
+			ifeq ($(has_bfd_iberty_z),y)
+				EXTLIBS += -lbfd -liberty -lz
+			else
+				has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -liberty > /dev/null 2>&1 && echo y")
+				ifeq ($(has_cplus_demangle),y)
+					EXTLIBS += -liberty
+					BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
+				else
+					msg := $(warning No bfd.h/libbfd found, install binutils-dev[el] to gain symbol demangling)
+					BASIC_CFLAGS += -DNO_DEMANGLE
+				endif
+			endif
+		endif
+	endif
+endif
+
 ifndef CC_LD_DYNPATH
 	ifdef NO_R_TO_GCC_LINKER
 		# Some gcc does not accept and pass -R to the linker to specify
@@ -377,12 +418,6 @@ ifndef CC_LD_DYNPATH
 	endif
 endif
 
-ifdef ZLIB_PATH
-	BASIC_CFLAGS += -I$(ZLIB_PATH)/include
-	EXTLIBS += -L$(ZLIB_PATH)/$(lib) $(CC_LD_DYNPATH)$(ZLIB_PATH)/$(lib)
-endif
-EXTLIBS += -lz
-
 ifdef NEEDS_SOCKET
 	EXTLIBS += -lsocket
 endif
@@ -693,6 +728,9 @@ builtin-init-db.o: builtin-init-db.c PERF-CFLAGS
 util/config.o: util/config.c PERF-CFLAGS
 	$(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
 
+util/rbtree.o: ../../lib/rbtree.c PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o util/rbtree.o -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
+
 perf-%$X: %.o $(PERFLIBS)
 	$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
 
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index 7e58e3ad150..5e17de984dc 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -10,9 +10,9 @@
 #include "util/util.h"
 
 #include "util/color.h"
-#include "util/list.h"
+#include <linux/list.h>
 #include "util/cache.h"
-#include "util/rbtree.h"
+#include <linux/rbtree.h>
 #include "util/symbol.h"
 #include "util/string.h"
 
@@ -25,16 +25,13 @@
 #define SHOW_USER	2
 #define SHOW_HV		4
 
-#define MIN_GREEN		0.5
-#define MIN_RED		5.0
-
-
 static char		const *input_name = "perf.data";
 static char		*vmlinux = "vmlinux";
 
 static char		default_sort_order[] = "comm,symbol";
 static char		*sort_order = default_sort_order;
 
+static int		force;
 static int		input;
 static int		show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
 
@@ -43,6 +40,10 @@ static int		dump_trace = 0;
 
 static int		verbose;
 
+static int		modules;
+
+static int		full_paths;
+
 static int		print_line;
 
 static unsigned long	page_size;
@@ -74,20 +75,12 @@ struct fork_event {
 	u32 pid, ppid;
 };
 
-struct period_event {
-	struct perf_event_header header;
-	u64 time;
-	u64 id;
-	u64 sample_period;
-};
-
 typedef union event_union {
 	struct perf_event_header	header;
 	struct ip_event			ip;
 	struct mmap_event		mmap;
 	struct comm_event		comm;
 	struct fork_event		fork;
-	struct period_event		period;
 } event_t;
 
 
@@ -160,7 +153,7 @@ static void dsos__fprintf(FILE *fp)
 
 static struct symbol *vdso__find_symbol(struct dso *dso, u64 ip)
 {
-	return dso__find_symbol(kernel_dso, ip);
+	return dso__find_symbol(dso, ip);
 }
 
 static int load_kernel(void)
@@ -171,8 +164,8 @@ static int load_kernel(void)
 	if (!kernel_dso)
 		return -1;
 
-	err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose);
-	if (err) {
+	err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose, modules);
+	if (err <= 0) {
 		dso__delete(kernel_dso);
 		kernel_dso = NULL;
 	} else
@@ -203,7 +196,7 @@ static u64 map__map_ip(struct map *map, u64 ip)
 	return ip - map->start + map->pgoff;
 }
 
-static u64 vdso__map_ip(struct map *map, u64 ip)
+static u64 vdso__map_ip(struct map *map __used, u64 ip)
 {
 	return ip;
 }
@@ -600,7 +593,7 @@ static LIST_HEAD(hist_entry__sort_list);
 
 static int sort_dimension__add(char *tok)
 {
-	int i;
+	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) {
 		struct sort_dimension *sd = &sort_dimensions[i];
@@ -855,7 +848,7 @@ static unsigned long total = 0,
 		     total_unknown = 0;
 
 static int
-process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
+process_sample_event(event_t *event, unsigned long offset, unsigned long head)
 {
 	char level;
 	int show = 0;
@@ -988,6 +981,13 @@ process_fork_event(event_t *event, unsigned long offset, unsigned long head)
 		(void *)(long)(event->header.size),
 		event->fork.pid, event->fork.ppid);
 
+	/*
+	 * A thread clone will have the same PID for both
+	 * parent and child.
+	 */
+	if (thread == parent)
+		return 0;
+
 	if (!thread || !parent || thread__fork(thread, parent)) {
 		dprintf("problem processing PERF_EVENT_FORK, skipping event.\n");
 		return -1;
@@ -998,25 +998,12 @@ process_fork_event(event_t *event, unsigned long offset, unsigned long head)
 }
 
 static int
-process_period_event(event_t *event, unsigned long offset, unsigned long head)
-{
-	dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
-		event->period.time,
-		event->period.id,
-		event->period.sample_period);
-
-	return 0;
-}
-
-static int
 process_event(event_t *event, unsigned long offset, unsigned long head)
 {
-	if (event->header.misc & PERF_EVENT_MISC_OVERFLOW)
-		return process_overflow_event(event, offset, head);
-
 	switch (event->header.type) {
+	case PERF_EVENT_SAMPLE:
+		return process_sample_event(event, offset, head);
+
 	case PERF_EVENT_MMAP:
 		return process_mmap_event(event, offset, head);
 
@@ -1025,9 +1012,6 @@ process_event(event_t *event, unsigned long offset, unsigned long head)
 
 	case PERF_EVENT_FORK:
 		return process_fork_event(event, offset, head);
-
-	case PERF_EVENT_PERIOD:
-		return process_period_event(event, offset, head);
 	/*
 	 * We dont process them right now but they are fine:
 	 */
@@ -1043,24 +1027,6 @@ process_event(event_t *event, unsigned long offset, unsigned long head)
 	return 0;
 }
 
-static char *get_color(double percent)
-{
-	char *color = PERF_COLOR_NORMAL;
-
-	/*
-	 * We color high-overhead entries in red, mid-overhead
-	 * entries in green - and keep the low overhead places
-	 * normal:
-	 */
-	if (percent >= MIN_RED)
-		color = PERF_COLOR_RED;
-	else {
-		if (percent > MIN_GREEN)
-			color = PERF_COLOR_GREEN;
-	}
-	return color;
-}
-
 static int
 parse_line(FILE *file, struct symbol *sym, u64 start, u64 len)
 {
@@ -1069,7 +1035,7 @@ parse_line(FILE *file, struct symbol *sym, u64 start, u64 len)
 	static const char *prev_color;
 	unsigned int offset;
 	size_t line_len;
-	u64 line_ip;
+	s64 line_ip;
 	int ret;
 	char *c;
 
@@ -1122,7 +1088,7 @@ parse_line(FILE *file, struct symbol *sym, u64 start, u64 len)
 		} else if (sym->hist_sum)
 			percent = 100.0 * hits / sym->hist_sum;
 
-		color = get_color(percent);
+		color = get_percent_color(percent);
 
 		/*
 		 * Also color the filename and line if needed, with
@@ -1258,7 +1224,7 @@ static void print_summary(char *filename)
 
 		sym_ext = rb_entry(node, struct sym_ext, node);
 		percent = sym_ext->percent;
-		color = get_color(percent);
+		color = get_percent_color(percent);
 		path = sym_ext->path;
 
 		color_fprintf(stdout, color, " %7.2f %s", percent, path);
@@ -1268,19 +1234,25 @@ static void print_summary(char *filename)
 
 static void annotate_sym(struct dso *dso, struct symbol *sym)
 {
-	char *filename = dso->name;
+	char *filename = dso->name, *d_filename;
 	u64 start, end, len;
 	char command[PATH_MAX*2];
 	FILE *file;
 
 	if (!filename)
 		return;
-	if (dso == kernel_dso)
+	if (sym->module)
+		filename = sym->module->path;
+	else if (dso == kernel_dso)
 		filename = vmlinux;
 
 	start = sym->obj_start;
 	if (!start)
 		start = sym->start;
+	if (full_paths)
+		d_filename = filename;
+	else
+		d_filename = basename(filename);
 
 	end = start + sym->end - sym->start + 1;
 	len = sym->end - sym->start;
@@ -1291,13 +1263,14 @@ static void annotate_sym(struct dso *dso, struct symbol *sym)
 	}
 
 	printf("\n\n------------------------------------------------\n");
-	printf(" Percent |	Source code & Disassembly of %s\n", filename);
+	printf(" Percent |	Source code & Disassembly of %s\n", d_filename);
 	printf("------------------------------------------------\n");
 
 	if (verbose >= 2)
 		printf("annotating [%p] %30s : [%p] %30s\n", dso, dso->name, sym, sym->name);
 
-	sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s", (u64)start, (u64)end, filename);
+	sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s|grep -v %s",
+			(u64)start, (u64)end, filename, filename);
 
 	if (verbose >= 3)
 		printf("doing: %s\n", command);
@@ -1362,6 +1335,11 @@ static int __cmd_annotate(void)
 		exit(-1);
 	}
 
+	if (!force && (stat.st_uid != geteuid())) {
+		fprintf(stderr, "file: %s not owned by current user\n", input_name);
+		exit(-1);
+	}
+
 	if (!stat.st_size) {
 		fprintf(stderr, "zero-sized file, nothing to do!\n");
 		exit(0);
@@ -1428,7 +1406,7 @@ more:
 
 	head += size;
 
-	if (offset + head < stat.st_size)
+	if (offset + head < (unsigned long)stat.st_size)
 		goto more;
 
 	rc = EXIT_SUCCESS;
@@ -1467,13 +1445,18 @@ static const struct option options[] = {
 		    "input file name"),
 	OPT_STRING('s', "symbol", &sym_hist_filter, "symbol",
 		    "symbol to annotate"),
+	OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
 	OPT_BOOLEAN('v', "verbose", &verbose,
 		    "be more verbose (show symbol address, etc)"),
 	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
 		    "dump raw trace in ASCII"),
 	OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
+	OPT_BOOLEAN('m', "modules", &modules,
+		    "load module symbols - WARNING: use only with -k and LIVE kernel"),
 	OPT_BOOLEAN('l', "print-line", &print_line,
 		    "print matching source lines (may be slow)"),
+	OPT_BOOLEAN('P', "full-paths", &full_paths,
+		    "Don't shorten the displayed pathnames"),
 	OPT_END()
 };
 
@@ -1492,7 +1475,7 @@ static void setup_sorting(void)
 	free(str);
 }
 
-int cmd_annotate(int argc, const char **argv, const char *prefix)
+int cmd_annotate(int argc, const char **argv, const char *prefix __used)
 {
 	symbol__init();
 
diff --git a/tools/perf/builtin-help.c b/tools/perf/builtin-help.c
index 0f32dc3f3c4..2599d86a733 100644
--- a/tools/perf/builtin-help.c
+++ b/tools/perf/builtin-help.c
@@ -3,6 +3,7 @@
  *
  * Builtin help command
  */
+#include "perf.h"
 #include "util/cache.h"
 #include "builtin.h"
 #include "util/exec_cmd.h"
@@ -277,7 +278,7 @@ static struct cmdnames main_cmds, other_cmds;
 
 void list_common_cmds_help(void)
 {
-	int i, longest = 0;
+	unsigned int i, longest = 0;
 
 	for (i = 0; i < ARRAY_SIZE(common_cmds); i++) {
 		if (longest < strlen(common_cmds[i].name))
@@ -415,9 +416,10 @@ static void show_html_page(const char *perf_cmd)
 	open_html(page_path.buf);
 }
 
-int cmd_help(int argc, const char **argv, const char *prefix)
+int cmd_help(int argc, const char **argv, const char *prefix __used)
 {
 	const char *alias;
+
 	load_command_list("perf-", &main_cmds, &other_cmds);
 
 	perf_config(perf_help_config, NULL);
diff --git a/tools/perf/builtin-list.c b/tools/perf/builtin-list.c
index fe60e37c96e..d88c6961274 100644
--- a/tools/perf/builtin-list.c
+++ b/tools/perf/builtin-list.c
@@ -10,11 +10,12 @@
 
 #include "perf.h"
 
-#include "util/parse-options.h"
 #include "util/parse-events.h"
+#include "util/cache.h"
 
-int cmd_list(int argc, const char **argv, const char *prefix)
+int cmd_list(int argc __used, const char **argv __used, const char *prefix __used)
 {
+	setup_pager();
 	print_events();
 	return 0;
 }
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index d7ebbd75754..89a5ddcd1de 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -14,6 +14,8 @@
 #include "util/parse-events.h"
 #include "util/string.h"
 
+#include "util/header.h"
+
 #include <unistd.h>
 #include <sched.h>
 
@@ -32,13 +34,18 @@ static int			output;
 static const char		*output_name			= "perf.data";
 static int			group				= 0;
 static unsigned int		realtime_prio			= 0;
+static int			raw_samples			= 0;
 static int			system_wide			= 0;
+static int			profile_cpu			= -1;
 static pid_t			target_pid			= -1;
 static int			inherit				= 1;
 static int			force				= 0;
 static int			append_file			= 0;
 static int			call_graph			= 0;
 static int			verbose				= 0;
+static int			inherit_stat			= 0;
+static int			no_samples			= 0;
+static int			sample_address			= 0;
 
 static long			samples;
 static struct timeval		last_read;
@@ -52,7 +59,8 @@ static int			nr_poll;
 static int			nr_cpu;
 
 static int			file_new = 1;
-static struct perf_file_header	file_header;
+
+struct perf_header		*header;
 
 struct mmap_event {
 	struct perf_event_header	header;
@@ -197,46 +205,48 @@ static void sig_atexit(void)
 	kill(getpid(), signr);
 }
 
-static void pid_synthesize_comm_event(pid_t pid, int full)
+static pid_t pid_synthesize_comm_event(pid_t pid, int full)
 {
 	struct comm_event comm_ev;
 	char filename[PATH_MAX];
 	char bf[BUFSIZ];
-	int fd;
-	size_t size;
-	char *field, *sep;
+	FILE *fp;
+	size_t size = 0;
 	DIR *tasks;
 	struct dirent dirent, *next;
+	pid_t tgid = 0;
 
-	snprintf(filename, sizeof(filename), "/proc/%d/stat", pid);
+	snprintf(filename, sizeof(filename), "/proc/%d/status", pid);
 
-	fd = open(filename, O_RDONLY);
-	if (fd < 0) {
+	fp = fopen(filename, "r");
+	if (fp == NULL) {
 		/*
 		 * We raced with a task exiting - just return:
 		 */
 		if (verbose)
 			fprintf(stderr, "couldn't open %s\n", filename);
-		return;
+		return 0;
 	}
-	if (read(fd, bf, sizeof(bf)) < 0) {
-		fprintf(stderr, "couldn't read %s\n", filename);
-		exit(EXIT_FAILURE);
-	}
-	close(fd);
 
-	/* 9027 (cat) R 6747 9027 6747 34816 9027 ... */
 	memset(&comm_ev, 0, sizeof(comm_ev));
-	field = strchr(bf, '(');
-	if (field == NULL)
-		goto out_failure;
-	sep = strchr(++field, ')');
-	if (sep == NULL)
-		goto out_failure;
-	size = sep - field;
-	memcpy(comm_ev.comm, field, size++);
-
-	comm_ev.pid = pid;
+	while (!comm_ev.comm[0] || !comm_ev.pid) {
+		if (fgets(bf, sizeof(bf), fp) == NULL)
+			goto out_failure;
+
+		if (memcmp(bf, "Name:", 5) == 0) {
+			char *name = bf + 5;
+			while (*name && isspace(*name))
+				++name;
+			size = strlen(name) - 1;
+			memcpy(comm_ev.comm, name, size++);
+		} else if (memcmp(bf, "Tgid:", 5) == 0) {
+			char *tgids = bf + 5;
+			while (*tgids && isspace(*tgids))
+				++tgids;
+			tgid = comm_ev.pid = atoi(tgids);
+		}
+	}
+
 	comm_ev.header.type = PERF_EVENT_COMM;
 	size = ALIGN(size, sizeof(u64));
 	comm_ev.header.size = sizeof(comm_ev) - (sizeof(comm_ev.comm) - size);
@@ -245,7 +255,7 @@ static void pid_synthesize_comm_event(pid_t pid, int full)
 		comm_ev.tid = pid;
 
 		write_output(&comm_ev, comm_ev.header.size);
-		return;
+		goto out_fclose;
 	}
 
 	snprintf(filename, sizeof(filename), "/proc/%d/task", pid);
@@ -262,7 +272,10 @@ static void pid_synthesize_comm_event(pid_t pid, int full)
 		write_output(&comm_ev, comm_ev.header.size);
 	}
 	closedir(tasks);
-	return;
+
+out_fclose:
+	fclose(fp);
+	return tgid;
 
 out_failure:
 	fprintf(stderr, "couldn't get COMM and pgid, malformed %s\n",
@@ -270,7 +283,7 @@ out_failure:
 	exit(EXIT_FAILURE);
 }
 
-static void pid_synthesize_mmap_samples(pid_t pid)
+static void pid_synthesize_mmap_samples(pid_t pid, pid_t tgid)
 {
 	char filename[PATH_MAX];
 	FILE *fp;
@@ -289,7 +302,7 @@ static void pid_synthesize_mmap_samples(pid_t pid)
 	while (1) {
 		char bf[BUFSIZ], *pbf = bf;
 		struct mmap_event mmap_ev = {
-			.header.type = PERF_EVENT_MMAP,
+			.header = { .type = PERF_EVENT_MMAP },
 		};
 		int n;
 		size_t size;
@@ -306,12 +319,15 @@ static void pid_synthesize_mmap_samples(pid_t pid)
 			continue;
 		pbf += n + 3;
 		if (*pbf == 'x') { /* vm_exec */
-			char *execname = strrchr(bf, ' ');
+			char *execname = strchr(bf, '/');
 
-			if (execname == NULL || execname[1] != '/')
+			/* Catch VDSO */
+			if (execname == NULL)
+				execname = strstr(bf, "[vdso]");
+
+			if (execname == NULL)
 				continue;
 
-			execname += 1;
 			size = strlen(execname);
 			execname[size - 1] = '\0'; /* Remove \n */
 			memcpy(mmap_ev.filename, execname, size);
@@ -319,7 +335,7 @@ static void pid_synthesize_mmap_samples(pid_t pid)
 			mmap_ev.len -= mmap_ev.start;
 			mmap_ev.header.size = (sizeof(mmap_ev) -
 					       (sizeof(mmap_ev.filename) - size));
-			mmap_ev.pid = pid;
+			mmap_ev.pid = tgid;
 			mmap_ev.tid = pid;
 
 			write_output(&mmap_ev, mmap_ev.header.size);
@@ -329,7 +345,7 @@ static void pid_synthesize_mmap_samples(pid_t pid)
 	fclose(fp);
 }
 
-static void synthesize_samples(void)
+static void synthesize_all(void)
 {
 	DIR *proc;
 	struct dirent dirent, *next;
@@ -338,14 +354,14 @@ static void synthesize_samples(void)
 
 	while (!readdir_r(proc, &dirent, &next) && next) {
 		char *end;
-		pid_t pid;
+		pid_t pid, tgid;
 
 		pid = strtol(dirent.d_name, &end, 10);
 		if (*end) /* only interested in proper numerical dirents */
 			continue;
 
-		pid_synthesize_comm_event(pid, 1);
-		pid_synthesize_mmap_samples(pid);
+		tgid = pid_synthesize_comm_event(pid, 1);
+		pid_synthesize_mmap_samples(pid, tgid);
 	}
 
 	closedir(proc);
@@ -353,12 +369,37 @@ static void synthesize_samples(void)
 
 static int group_fd;
 
+static struct perf_header_attr *get_header_attr(struct perf_counter_attr *a, int nr)
+{
+	struct perf_header_attr *h_attr;
+
+	if (nr < header->attrs) {
+		h_attr = header->attr[nr];
+	} else {
+		h_attr = perf_header_attr__new(a);
+		perf_header__add_attr(header, h_attr);
+	}
+
+	return h_attr;
+}
+
 static void create_counter(int counter, int cpu, pid_t pid)
 {
 	struct perf_counter_attr *attr = attrs + counter;
-	int track = 1;
+	struct perf_header_attr *h_attr;
+	int track = !counter; /* only the first counter needs these */
+	struct {
+		u64 count;
+		u64 time_enabled;
+		u64 time_running;
+		u64 id;
+	} read_data;
 
-	attr->sample_type	= PERF_SAMPLE_IP | PERF_SAMPLE_TID;
+	attr->read_format	= PERF_FORMAT_TOTAL_TIME_ENABLED |
+				  PERF_FORMAT_TOTAL_TIME_RUNNING |
+				  PERF_FORMAT_ID;
+
+	attr->sample_type	|= PERF_SAMPLE_IP | PERF_SAMPLE_TID;
 
 	if (freq) {
 		attr->sample_type	|= PERF_SAMPLE_PERIOD;
@@ -366,25 +407,26 @@ static void create_counter(int counter, int cpu, pid_t pid)
 		attr->sample_freq	= freq;
 	}
 
+	if (no_samples)
+		attr->sample_freq = 0;
+
+	if (inherit_stat)
+		attr->inherit_stat = 1;
+
+	if (sample_address)
+		attr->sample_type	|= PERF_SAMPLE_ADDR;
+
 	if (call_graph)
 		attr->sample_type	|= PERF_SAMPLE_CALLCHAIN;
 
-	if (file_new) {
-		file_header.sample_type = attr->sample_type;
-	} else {
-		if (file_header.sample_type != attr->sample_type) {
-			fprintf(stderr, "incompatible append\n");
-			exit(-1);
-		}
-	}
+	if (raw_samples)
+		attr->sample_type	|= PERF_SAMPLE_RAW;
 
 	attr->mmap		= track;
 	attr->comm		= track;
 	attr->inherit		= (cpu < 0) && inherit;
 	attr->disabled		= 1;
 
-	track = 0; /* only the first counter needs these */
-
 try_again:
 	fd[nr_cpu][counter] = sys_perf_counter_open(attr, pid, cpu, group_fd, 0);
 
@@ -393,6 +435,8 @@ try_again:
 
 		if (err == EPERM)
 			die("Permission error - are you root?\n");
+		else if (err ==  ENODEV && profile_cpu != -1)
+			die("No such device - did you specify an out-of-range profile CPU?\n");
 
 		/*
 		 * If it's cycles then fall back to hrtimer
@@ -415,6 +459,22 @@ try_again:
 		exit(-1);
 	}
 
+	h_attr = get_header_attr(attr, counter);
+
+	if (!file_new) {
+		if (memcmp(&h_attr->attr, attr, sizeof(*attr))) {
+			fprintf(stderr, "incompatible append\n");
+			exit(-1);
+		}
+	}
+
+	if (read(fd[nr_cpu][counter], &read_data, sizeof(read_data)) == -1) {
+		perror("Unable to read perf file descriptor\n");
+		exit(-1);
+	}
+
+	perf_header_attr__add_id(h_attr, read_data.id);
+
 	assert(fd[nr_cpu][counter] >= 0);
 	fcntl(fd[nr_cpu][counter], F_SETFL, O_NONBLOCK);
 
@@ -445,11 +505,6 @@ static void open_counters(int cpu, pid_t pid)
 {
 	int counter;
 
-	if (pid > 0) {
-		pid_synthesize_comm_event(pid, 0);
-		pid_synthesize_mmap_samples(pid);
-	}
-
 	group_fd = -1;
 	for (counter = 0; counter < nr_counters; counter++)
 		create_counter(counter, cpu, pid);
@@ -459,17 +514,16 @@ static void open_counters(int cpu, pid_t pid)
 
 static void atexit_header(void)
 {
-	file_header.data_size += bytes_written;
+	header->data_size += bytes_written;
 
-	if (pwrite(output, &file_header, sizeof(file_header), 0) == -1)
-		perror("failed to write on file headers");
+	perf_header__write(header, output);
 }
 
 static int __cmd_record(int argc, const char **argv)
 {
 	int i, counter;
 	struct stat st;
-	pid_t pid;
+	pid_t pid = 0;
 	int flags;
 	int ret;
 
@@ -482,10 +536,14 @@ static int __cmd_record(int argc, const char **argv)
 	signal(SIGCHLD, sig_handler);
 	signal(SIGINT, sig_handler);
 
-	if (!stat(output_name, &st) && !force && !append_file) {
-		fprintf(stderr, "Error, output file %s exists, use -A to append or -f to overwrite.\n",
-				output_name);
-		exit(-1);
+	if (!stat(output_name, &st) && st.st_size) {
+		if (!force && !append_file) {
+			fprintf(stderr, "Error, output file %s exists, use -A to append or -f to overwrite.\n",
+					output_name);
+			exit(-1);
+		}
+	} else {
+		append_file = 0;
 	}
 
 	flags = O_CREAT|O_RDWR;
@@ -500,21 +558,36 @@ static int __cmd_record(int argc, const char **argv)
 		exit(-1);
 	}
 
-	if (!file_new) {
-		if (read(output, &file_header, sizeof(file_header)) == -1) {
-			perror("failed to read file headers");
-			exit(-1);
-		}
+	if (!file_new)
+		header = perf_header__read(output);
+	else
+		header = perf_header__new();
+
+	atexit(atexit_header);
 
-		lseek(output, file_header.data_size, SEEK_CUR);
+	if (!system_wide) {
+		pid = target_pid;
+		if (pid == -1)
+			pid = getpid();
+
+		open_counters(profile_cpu, pid);
+	} else {
+		if (profile_cpu != -1) {
+			open_counters(profile_cpu, target_pid);
+		} else {
+			for (i = 0; i < nr_cpus; i++)
+				open_counters(i, target_pid);
+		}
 	}
 
-	atexit(atexit_header);
+	if (file_new)
+		perf_header__write(header, output);
 
 	if (!system_wide) {
-		open_counters(-1, target_pid != -1 ? target_pid : getpid());
-	} else for (i = 0; i < nr_cpus; i++)
-		open_counters(i, target_pid);
+		pid_t tgid = pid_synthesize_comm_event(pid, 0);
+		pid_synthesize_mmap_samples(pid, tgid);
+	} else
+		synthesize_all();
 
 	if (target_pid == -1 && argc) {
 		pid = fork();
@@ -539,10 +612,7 @@ static int __cmd_record(int argc, const char **argv)
 		}
 	}
 
-	if (system_wide)
-		synthesize_samples();
-
-	while (!done) {
+	for (;;) {
 		int hits = samples;
 
 		for (i = 0; i < nr_cpu; i++) {
@@ -550,8 +620,11 @@ static int __cmd_record(int argc, const char **argv)
 				mmap_read(&mmap_array[i][counter]);
 		}
 
-		if (hits == samples)
+		if (hits == samples) {
+			if (done)
+				break;
 			ret = poll(event_array, nr_poll, 100);
+		}
 	}
 
 	/*
@@ -580,10 +653,14 @@ static const struct option options[] = {
 		    "record events on existing pid"),
 	OPT_INTEGER('r', "realtime", &realtime_prio,
 		    "collect data with this RT SCHED_FIFO priority"),
+	OPT_BOOLEAN('R', "raw-samples", &raw_samples,
+		    "collect raw sample records from all opened counters"),
 	OPT_BOOLEAN('a', "all-cpus", &system_wide,
 			    "system-wide collection from all CPUs"),
 	OPT_BOOLEAN('A', "append", &append_file,
 			    "append to the output file to do incremental profiling"),
+	OPT_INTEGER('C', "profile_cpu", &profile_cpu,
+			    "CPU to profile on"),
 	OPT_BOOLEAN('f', "force", &force,
 			"overwrite existing data file"),
 	OPT_LONG('c', "count", &default_interval,
@@ -600,14 +677,21 @@ static const struct option options[] = {
 		    "do call-graph (stack chain/backtrace) recording"),
 	OPT_BOOLEAN('v', "verbose", &verbose,
 		    "be more verbose (show counter open errors, etc)"),
+	OPT_BOOLEAN('s', "stat", &inherit_stat,
+		    "per thread counts"),
+	OPT_BOOLEAN('d', "data", &sample_address,
+		    "Sample addresses"),
+	OPT_BOOLEAN('n', "no-samples", &no_samples,
+		    "don't sample"),
 	OPT_END()
 };
 
-int cmd_record(int argc, const char **argv, const char *prefix)
+int cmd_record(int argc, const char **argv, const char *prefix __used)
 {
 	int counter;
 
-	argc = parse_options(argc, argv, options, record_usage, 0);
+	argc = parse_options(argc, argv, options, record_usage,
+		PARSE_OPT_STOP_AT_NON_OPTION);
 	if (!argc && target_pid == -1 && !system_wide)
 		usage_with_options(record_usage, options);
 
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 5eb5566f0c9..8b2ec882e6e 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -10,13 +10,16 @@
 #include "util/util.h"
 
 #include "util/color.h"
-#include "util/list.h"
+#include <linux/list.h>
 #include "util/cache.h"
-#include "util/rbtree.h"
+#include <linux/rbtree.h>
 #include "util/symbol.h"
 #include "util/string.h"
+#include "util/callchain.h"
+#include "util/strlist.h"
 
 #include "perf.h"
+#include "util/header.h"
 
 #include "util/parse-options.h"
 #include "util/parse-events.h"
@@ -28,9 +31,14 @@
 static char		const *input_name = "perf.data";
 static char		*vmlinux = NULL;
 
-static char		default_sort_order[] = "comm,dso";
+static char		default_sort_order[] = "comm,dso,symbol";
 static char		*sort_order = default_sort_order;
+static char		*dso_list_str, *comm_list_str, *sym_list_str,
+			*col_width_list_str;
+static struct strlist	*dso_list, *comm_list, *sym_list;
+static char		*field_sep;
 
+static int		force;
 static int		input;
 static int		show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
 
@@ -41,7 +49,10 @@ static int		dump_trace = 0;
 static int		verbose;
 #define eprintf(x...)	do { if (verbose) fprintf(stderr, x); } while (0)
 
+static int		modules;
+
 static int		full_paths;
+static int		show_nr_samples;
 
 static unsigned long	page_size;
 static unsigned long	mmap_window = 32;
@@ -52,6 +63,18 @@ static regex_t		parent_regex;
 
 static int		exclude_other = 1;
 
+static char		callchain_default_opt[] = "fractal,0.5";
+
+static int		callchain;
+
+static
+struct callchain_param	callchain_param = {
+	.mode	= CHAIN_GRAPH_REL,
+	.min_percent = 0.5
+};
+
+static u64		sample_type;
+
 struct ip_event {
 	struct perf_event_header header;
 	u64 ip;
@@ -59,11 +82,6 @@ struct ip_event {
 	unsigned char __more_data[];
 };
 
-struct ip_callchain {
-	u64 nr;
-	u64 ips[0];
-};
-
 struct mmap_event {
 	struct perf_event_header header;
 	u32 pid, tid;
@@ -82,19 +100,22 @@ struct comm_event {
 struct fork_event {
 	struct perf_event_header header;
 	u32 pid, ppid;
+	u32 tid, ptid;
 };
 
-struct period_event {
+struct lost_event {
 	struct perf_event_header header;
-	u64 time;
 	u64 id;
-	u64 sample_period;
+	u64 lost;
 };
 
-struct lost_event {
+struct read_event {
 	struct perf_event_header header;
+	u32 pid,tid;
+	u64 value;
+	u64 time_enabled;
+	u64 time_running;
 	u64 id;
-	u64 lost;
 };
 
 typedef union event_union {
@@ -103,13 +124,41 @@ typedef union event_union {
 	struct mmap_event		mmap;
 	struct comm_event		comm;
 	struct fork_event		fork;
-	struct period_event		period;
 	struct lost_event		lost;
+	struct read_event		read;
 } event_t;
 
+static int repsep_fprintf(FILE *fp, const char *fmt, ...)
+{
+	int n;
+	va_list ap;
+
+	va_start(ap, fmt);
+	if (!field_sep)
+		n = vfprintf(fp, fmt, ap);
+	else {
+		char *bf = NULL;
+		n = vasprintf(&bf, fmt, ap);
+		if (n > 0) {
+			char *sep = bf;
+			while (1) {
+				sep = strchr(sep, *field_sep);
+				if (sep == NULL)
+					break;
+				*sep = '.';
+			}
+		}
+		fputs(bf, fp);
+		free(bf);
+	}
+	va_end(ap);
+	return n;
+}
+
 static LIST_HEAD(dsos);
 static struct dso *kernel_dso;
 static struct dso *vdso;
+static struct dso *hypervisor_dso;
 
 static void dsos__add(struct dso *dso)
 {
@@ -165,7 +214,7 @@ static void dsos__fprintf(FILE *fp)
 
 static struct symbol *vdso__find_symbol(struct dso *dso, u64 ip)
 {
-	return dso__find_symbol(kernel_dso, ip);
+	return dso__find_symbol(dso, ip);
 }
 
 static int load_kernel(void)
@@ -176,8 +225,8 @@ static int load_kernel(void)
 	if (!kernel_dso)
 		return -1;
 
-	err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose);
-	if (err) {
+	err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose, modules);
+	if (err <= 0) {
 		dso__delete(kernel_dso);
 		kernel_dso = NULL;
 	} else
@@ -191,6 +240,11 @@ static int load_kernel(void)
 
 	dsos__add(vdso);
 
+	hypervisor_dso = dso__new("[hypervisor]", 0);
+	if (!hypervisor_dso)
+		return -1;
+	dsos__add(hypervisor_dso);
+
 	return err;
 }
 
@@ -202,7 +256,7 @@ static int strcommon(const char *pathname)
 {
 	int n = 0;
 
-	while (pathname[n] == cwd[n] && n < cwdlen)
+	while (n < cwdlen && pathname[n] == cwd[n])
 		++n;
 
 	return n;
@@ -222,14 +276,14 @@ static u64 map__map_ip(struct map *map, u64 ip)
 	return ip - map->start + map->pgoff;
 }
 
-static u64 vdso__map_ip(struct map *map, u64 ip)
+static u64 vdso__map_ip(struct map *map __used, u64 ip)
 {
 	return ip;
 }
 
 static inline int is_anon_memory(const char *filename)
 {
-     return strcmp(filename, "//anon") == 0;
+	return strcmp(filename, "//anon") == 0;
 }
 
 static struct map *map__new(struct mmap_event *event)
@@ -332,12 +386,28 @@ static struct thread *thread__new(pid_t pid)
 	return self;
 }
 
+static unsigned int dsos__col_width,
+		    comms__col_width,
+		    threads__col_width;
+
 static int thread__set_comm(struct thread *self, const char *comm)
 {
 	if (self->comm)
 		free(self->comm);
 	self->comm = strdup(comm);
-	return self->comm ? 0 : -ENOMEM;
+	if (!self->comm)
+		return -ENOMEM;
+
+	if (!col_width_list_str && !field_sep &&
+	    (!comm_list || strlist__has_entry(comm_list, comm))) {
+		unsigned int slen = strlen(comm);
+		if (slen > comms__col_width) {
+			comms__col_width = slen;
+			threads__col_width = slen + 6;
+		}
+	}
+
+	return 0;
 }
 
 static size_t thread__fprintf(struct thread *self, FILE *fp)
@@ -400,9 +470,27 @@ static void thread__insert_map(struct thread *self, struct map *map)
 
 	list_for_each_entry_safe(pos, tmp, &self->maps, node) {
 		if (map__overlap(pos, map)) {
-			list_del_init(&pos->node);
-			/* XXX leaks dsos */
-			free(pos);
+			if (verbose >= 2) {
+				printf("overlapping maps:\n");
+				map__fprintf(map, stdout);
+				map__fprintf(pos, stdout);
+			}
+
+			if (map->start <= pos->start && map->end > pos->start)
+				pos->start = map->end;
+
+			if (map->end >= pos->end && map->start < pos->end)
+				pos->end = map->start;
+
+			if (verbose >= 2) {
+				printf("after collision:\n");
+				map__fprintf(pos, stdout);
+			}
+
+			if (pos->start >= pos->end) {
+				list_del_init(&pos->node);
+				free(pos);
+			}
 		}
 	}
 
@@ -464,17 +552,19 @@ static size_t threads__fprintf(FILE *fp)
 static struct rb_root hist;
 
 struct hist_entry {
-	struct rb_node	 rb_node;
-
-	struct thread	 *thread;
-	struct map	 *map;
-	struct dso	 *dso;
-	struct symbol	 *sym;
-	struct symbol	 *parent;
-	u64		 ip;
-	char		 level;
-
-	u64		 count;
+	struct rb_node		rb_node;
+
+	struct thread		*thread;
+	struct map		*map;
+	struct dso		*dso;
+	struct symbol		*sym;
+	struct symbol		*parent;
+	u64			ip;
+	char			level;
+	struct callchain_node	callchain;
+	struct rb_root		sorted_chain;
+
+	u64			count;
 };
 
 /*
@@ -488,7 +578,9 @@ struct sort_entry {
 
 	int64_t (*cmp)(struct hist_entry *, struct hist_entry *);
 	int64_t (*collapse)(struct hist_entry *, struct hist_entry *);
-	size_t	(*print)(FILE *fp, struct hist_entry *);
+	size_t	(*print)(FILE *fp, struct hist_entry *, unsigned int width);
+	unsigned int *width;
+	bool	elide;
 };
 
 static int64_t cmp_null(void *l, void *r)
@@ -510,15 +602,17 @@ sort__thread_cmp(struct hist_entry *left, struct hist_entry *right)
 }
 
 static size_t
-sort__thread_print(FILE *fp, struct hist_entry *self)
+sort__thread_print(FILE *fp, struct hist_entry *self, unsigned int width)
 {
-	return fprintf(fp, "%16s:%5d", self->thread->comm ?: "", self->thread->pid);
+	return repsep_fprintf(fp, "%*s:%5d", width - 6,
+			      self->thread->comm ?: "", self->thread->pid);
 }
 
 static struct sort_entry sort_thread = {
-	.header = "         Command:  Pid",
+	.header = "Command:  Pid",
 	.cmp	= sort__thread_cmp,
 	.print	= sort__thread_print,
+	.width	= &threads__col_width,
 };
 
 /* --sort comm */
@@ -542,16 +636,17 @@ sort__comm_collapse(struct hist_entry *left, struct hist_entry *right)
 }
 
 static size_t
-sort__comm_print(FILE *fp, struct hist_entry *self)
+sort__comm_print(FILE *fp, struct hist_entry *self, unsigned int width)
 {
-	return fprintf(fp, "%16s", self->thread->comm);
+	return repsep_fprintf(fp, "%*s", width, self->thread->comm);
 }
 
 static struct sort_entry sort_comm = {
-	.header		= "         Command",
+	.header		= "Command",
 	.cmp		= sort__comm_cmp,
 	.collapse	= sort__comm_collapse,
 	.print		= sort__comm_print,
+	.width		= &comms__col_width,
 };
 
 /* --sort dso */
@@ -569,18 +664,19 @@ sort__dso_cmp(struct hist_entry *left, struct hist_entry *right)
 }
 
 static size_t
-sort__dso_print(FILE *fp, struct hist_entry *self)
+sort__dso_print(FILE *fp, struct hist_entry *self, unsigned int width)
 {
 	if (self->dso)
-		return fprintf(fp, "%-25s", self->dso->name);
+		return repsep_fprintf(fp, "%-*s", width, self->dso->name);
 
-	return fprintf(fp, "%016llx         ", (u64)self->ip);
+	return repsep_fprintf(fp, "%*llx", width, (u64)self->ip);
 }
 
 static struct sort_entry sort_dso = {
-	.header = "Shared Object            ",
+	.header = "Shared Object",
 	.cmp	= sort__dso_cmp,
 	.print	= sort__dso_print,
+	.width	= &dsos__col_width,
 };
 
 /* --sort symbol */
@@ -600,18 +696,23 @@ sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
 }
 
 static size_t
-sort__sym_print(FILE *fp, struct hist_entry *self)
+sort__sym_print(FILE *fp, struct hist_entry *self, unsigned int width __used)
 {
 	size_t ret = 0;
 
 	if (verbose)
-		ret += fprintf(fp, "%#018llx  ", (u64)self->ip);
+		ret += repsep_fprintf(fp, "%#018llx %c ", (u64)self->ip,
+				      dso__symtab_origin(self->dso));
 
+	ret += repsep_fprintf(fp, "[%c] ", self->level);
 	if (self->sym) {
-		ret += fprintf(fp, "[%c] %s",
-			self->dso == kernel_dso ? 'k' : '.', self->sym->name);
+		ret += repsep_fprintf(fp, "%s", self->sym->name);
+
+		if (self->sym->module)
+			ret += repsep_fprintf(fp, "\t[%s]",
+					     self->sym->module->name);
 	} else {
-		ret += fprintf(fp, "%#016llx", (u64)self->ip);
+		ret += repsep_fprintf(fp, "%#016llx", (u64)self->ip);
 	}
 
 	return ret;
@@ -638,19 +739,19 @@ sort__parent_cmp(struct hist_entry *left, struct hist_entry *right)
 }
 
 static size_t
-sort__parent_print(FILE *fp, struct hist_entry *self)
+sort__parent_print(FILE *fp, struct hist_entry *self, unsigned int width)
 {
-	size_t ret = 0;
-
-	ret += fprintf(fp, "%-20s", self->parent ? self->parent->name : "[other]");
-
-	return ret;
+	return repsep_fprintf(fp, "%-*s", width,
+			      self->parent ? self->parent->name : "[other]");
 }
 
+static unsigned int parent_symbol__col_width;
+
 static struct sort_entry sort_parent = {
-	.header = "Parent symbol       ",
+	.header = "Parent symbol",
 	.cmp	= sort__parent_cmp,
 	.print	= sort__parent_print,
+	.width	= &parent_symbol__col_width,
 };
 
 static int sort__need_collapse = 0;
@@ -674,7 +775,7 @@ static LIST_HEAD(hist_entry__sort_list);
 
 static int sort_dimension__add(char *tok)
 {
-	int i;
+	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) {
 		struct sort_dimension *sd = &sort_dimensions[i];
@@ -744,6 +845,204 @@ hist_entry__collapse(struct hist_entry *left, struct hist_entry *right)
 	return cmp;
 }
 
+static size_t ipchain__fprintf_graph_line(FILE *fp, int depth, int depth_mask)
+{
+	int i;
+	size_t ret = 0;
+
+	ret += fprintf(fp, "%s", "                ");
+
+	for (i = 0; i < depth; i++)
+		if (depth_mask & (1 << i))
+			ret += fprintf(fp, "|          ");
+		else
+			ret += fprintf(fp, "           ");
+
+	ret += fprintf(fp, "\n");
+
+	return ret;
+}
+static size_t
+ipchain__fprintf_graph(FILE *fp, struct callchain_list *chain, int depth,
+		       int depth_mask, int count, u64 total_samples,
+		       int hits)
+{
+	int i;
+	size_t ret = 0;
+
+	ret += fprintf(fp, "%s", "                ");
+	for (i = 0; i < depth; i++) {
+		if (depth_mask & (1 << i))
+			ret += fprintf(fp, "|");
+		else
+			ret += fprintf(fp, " ");
+		if (!count && i == depth - 1) {
+			double percent;
+
+			percent = hits * 100.0 / total_samples;
+			ret += percent_color_fprintf(fp, "--%2.2f%%-- ", percent);
+		} else
+			ret += fprintf(fp, "%s", "          ");
+	}
+	if (chain->sym)
+		ret += fprintf(fp, "%s\n", chain->sym->name);
+	else
+		ret += fprintf(fp, "%p\n", (void *)(long)chain->ip);
+
+	return ret;
+}
+
+static struct symbol *rem_sq_bracket;
+static struct callchain_list rem_hits;
+
+static void init_rem_hits(void)
+{
+	rem_sq_bracket = malloc(sizeof(*rem_sq_bracket) + 6);
+	if (!rem_sq_bracket) {
+		fprintf(stderr, "Not enough memory to display remaining hits\n");
+		return;
+	}
+
+	strcpy(rem_sq_bracket->name, "[...]");
+	rem_hits.sym = rem_sq_bracket;
+}
+
+static size_t
+callchain__fprintf_graph(FILE *fp, struct callchain_node *self,
+			u64 total_samples, int depth, int depth_mask)
+{
+	struct rb_node *node, *next;
+	struct callchain_node *child;
+	struct callchain_list *chain;
+	int new_depth_mask = depth_mask;
+	u64 new_total;
+	u64 remaining;
+	size_t ret = 0;
+	int i;
+
+	if (callchain_param.mode == CHAIN_GRAPH_REL)
+		new_total = self->children_hit;
+	else
+		new_total = total_samples;
+
+	remaining = new_total;
+
+	node = rb_first(&self->rb_root);
+	while (node) {
+		u64 cumul;
+
+		child = rb_entry(node, struct callchain_node, rb_node);
+		cumul = cumul_hits(child);
+		remaining -= cumul;
+
+		/*
+		 * The depth mask manages the output of pipes that show
+		 * the depth. We don't want to keep the pipes of the current
+		 * level for the last child of this depth.
+		 * Except if we have remaining filtered hits. They will
+		 * supersede the last child
+		 */
+		next = rb_next(node);
+		if (!next && (callchain_param.mode != CHAIN_GRAPH_REL || !remaining))
+			new_depth_mask &= ~(1 << (depth - 1));
+
+		/*
+		 * But we keep the older depth mask for the line seperator
+		 * to keep the level link until we reach the last child
+		 */
+		ret += ipchain__fprintf_graph_line(fp, depth, depth_mask);
+		i = 0;
+		list_for_each_entry(chain, &child->val, list) {
+			if (chain->ip >= PERF_CONTEXT_MAX)
+				continue;
+			ret += ipchain__fprintf_graph(fp, chain, depth,
+						      new_depth_mask, i++,
+						      new_total,
+						      cumul);
+		}
+		ret += callchain__fprintf_graph(fp, child, new_total,
+						depth + 1,
+						new_depth_mask | (1 << depth));
+		node = next;
+	}
+
+	if (callchain_param.mode == CHAIN_GRAPH_REL &&
+		remaining && remaining != new_total) {
+
+		if (!rem_sq_bracket)
+			return ret;
+
+		new_depth_mask &= ~(1 << (depth - 1));
+
+		ret += ipchain__fprintf_graph(fp, &rem_hits, depth,
+					      new_depth_mask, 0, new_total,
+					      remaining);
+	}
+
+	return ret;
+}
+
+static size_t
+callchain__fprintf_flat(FILE *fp, struct callchain_node *self,
+			u64 total_samples)
+{
+	struct callchain_list *chain;
+	size_t ret = 0;
+
+	if (!self)
+		return 0;
+
+	ret += callchain__fprintf_flat(fp, self->parent, total_samples);
+
+
+	list_for_each_entry(chain, &self->val, list) {
+		if (chain->ip >= PERF_CONTEXT_MAX)
+			continue;
+		if (chain->sym)
+			ret += fprintf(fp, "                %s\n", chain->sym->name);
+		else
+			ret += fprintf(fp, "                %p\n",
+					(void *)(long)chain->ip);
+	}
+
+	return ret;
+}
+
+static size_t
+hist_entry_callchain__fprintf(FILE *fp, struct hist_entry *self,
+			      u64 total_samples)
+{
+	struct rb_node *rb_node;
+	struct callchain_node *chain;
+	size_t ret = 0;
+
+	rb_node = rb_first(&self->sorted_chain);
+	while (rb_node) {
+		double percent;
+
+		chain = rb_entry(rb_node, struct callchain_node, rb_node);
+		percent = chain->hit * 100.0 / total_samples;
+		switch (callchain_param.mode) {
+		case CHAIN_FLAT:
+			ret += percent_color_fprintf(fp, "           %6.2f%%\n",
+						     percent);
+			ret += callchain__fprintf_flat(fp, chain, total_samples);
+			break;
+		case CHAIN_GRAPH_ABS: /* Falldown */
+		case CHAIN_GRAPH_REL:
+			ret += callchain__fprintf_graph(fp, chain,
+							total_samples, 1, 1);
+		default:
+			break;
+		}
+		ret += fprintf(fp, "\n");
+		rb_node = rb_next(rb_node);
+	}
+
+	return ret;
+}
+
+
 static size_t
 hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples)
 {
@@ -753,37 +1052,33 @@ hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples)
 	if (exclude_other && !self->parent)
 		return 0;
 
-	if (total_samples) {
-		double percent = self->count * 100.0 / total_samples;
-		char *color = PERF_COLOR_NORMAL;
-
-		/*
-		 * We color high-overhead entries in red, mid-overhead
-		 * entries in green - and keep the low overhead places
-		 * normal:
-		 */
-		if (percent >= 5.0) {
-			color = PERF_COLOR_RED;
-		} else {
-			if (percent >= 0.5)
-				color = PERF_COLOR_GREEN;
-		}
+	if (total_samples)
+		ret = percent_color_fprintf(fp,
+					    field_sep ? "%.2f" : "   %6.2f%%",
+					(self->count * 100.0) / total_samples);
+	else
+		ret = fprintf(fp, field_sep ? "%lld" : "%12lld ", self->count);
 
-		ret = color_fprintf(fp, color, "   %6.2f%%",
-				(self->count * 100.0) / total_samples);
-	} else
-		ret = fprintf(fp, "%12Ld ", self->count);
+	if (show_nr_samples) {
+		if (field_sep)
+			fprintf(fp, "%c%lld", *field_sep, self->count);
+		else
+			fprintf(fp, "%11lld", self->count);
+	}
 
 	list_for_each_entry(se, &hist_entry__sort_list, list) {
-		if (exclude_other && (se == &sort_parent))
+		if (se->elide)
 			continue;
 
-		fprintf(fp, "  ");
-		ret += se->print(fp, self);
+		fprintf(fp, "%s", field_sep ?: "  ");
+		ret += se->print(fp, self, se->width ? *se->width : 0);
 	}
 
 	ret += fprintf(fp, "\n");
 
+	if (callchain)
+		hist_entry_callchain__fprintf(fp, self, total_samples);
+
 	return ret;
 }
 
@@ -791,13 +1086,25 @@ hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples)
  *
  */
 
+static void dso__calc_col_width(struct dso *self)
+{
+	if (!col_width_list_str && !field_sep &&
+	    (!dso_list || strlist__has_entry(dso_list, self->name))) {
+		unsigned int slen = strlen(self->name);
+		if (slen > dsos__col_width)
+			dsos__col_width = slen;
+	}
+
+	self->slen_calculated = 1;
+}
+
 static struct symbol *
 resolve_symbol(struct thread *thread, struct map **mapp,
 	       struct dso **dsop, u64 *ipp)
 {
 	struct dso *dso = dsop ? *dsop : NULL;
 	struct map *map = mapp ? *mapp : NULL;
-	uint64_t ip = *ipp;
+	u64 ip = *ipp;
 
 	if (!thread)
 		return NULL;
@@ -810,11 +1117,18 @@ resolve_symbol(struct thread *thread, struct map **mapp,
 
 	map = thread__find_map(thread, ip);
 	if (map != NULL) {
+		/*
+		 * We have to do this here as we may have a dso
+		 * with no symbol hit that has a name longer than
+		 * the ones with symbols sampled.
+		 */
+		if (!sort_dso.elide && !map->dso->slen_calculated)
+			dso__calc_col_width(map->dso);
+
 		if (mapp)
 			*mapp = map;
 got_map:
 		ip = map->map_ip(map, ip);
-		*ipp  = ip;
 
 		dso = map->dso;
 	} else {
@@ -828,6 +1142,8 @@ got_map:
 		dso = kernel_dso;
 	}
 	dprintf(" ...... dso: %s\n", dso ? dso->name : "<not found>");
+	dprintf(" ...... map: %Lx -> %Lx\n", *ipp, ip);
+	*ipp  = ip;
 
 	if (dsop)
 		*dsop = dso;
@@ -846,6 +1162,58 @@ static int call__match(struct symbol *sym)
 	return 0;
 }
 
+static struct symbol **
+resolve_callchain(struct thread *thread, struct map *map __used,
+		    struct ip_callchain *chain, struct hist_entry *entry)
+{
+	u64 context = PERF_CONTEXT_MAX;
+	struct symbol **syms = NULL;
+	unsigned int i;
+
+	if (callchain) {
+		syms = calloc(chain->nr, sizeof(*syms));
+		if (!syms) {
+			fprintf(stderr, "Can't allocate memory for symbols\n");
+			exit(-1);
+		}
+	}
+
+	for (i = 0; i < chain->nr; i++) {
+		u64 ip = chain->ips[i];
+		struct dso *dso = NULL;
+		struct symbol *sym;
+
+		if (ip >= PERF_CONTEXT_MAX) {
+			context = ip;
+			continue;
+		}
+
+		switch (context) {
+		case PERF_CONTEXT_HV:
+			dso = hypervisor_dso;
+			break;
+		case PERF_CONTEXT_KERNEL:
+			dso = kernel_dso;
+			break;
+		default:
+			break;
+		}
+
+		sym = resolve_symbol(thread, NULL, &dso, &ip);
+
+		if (sym) {
+			if (sort__has_parent && call__match(sym) &&
+			    !entry->parent)
+				entry->parent = sym;
+			if (!callchain)
+				break;
+			syms[i] = sym;
+		}
+	}
+
+	return syms;
+}
+
 /*
  * collect histogram counts
  */
@@ -858,6 +1226,7 @@ hist_entry__add(struct thread *thread, struct map *map, struct dso *dso,
 	struct rb_node **p = &hist.rb_node;
 	struct rb_node *parent = NULL;
 	struct hist_entry *he;
+	struct symbol **syms = NULL;
 	struct hist_entry entry = {
 		.thread	= thread,
 		.map	= map,
@@ -867,39 +1236,12 @@ hist_entry__add(struct thread *thread, struct map *map, struct dso *dso,
 		.level	= level,
 		.count	= count,
 		.parent = NULL,
+		.sorted_chain = RB_ROOT
 	};
 	int cmp;
 
-	if (sort__has_parent && chain) {
-		u64 context = PERF_CONTEXT_MAX;
-		int i;
-
-		for (i = 0; i < chain->nr; i++) {
-			u64 ip = chain->ips[i];
-			struct dso *dso = NULL;
-			struct symbol *sym;
-
-			if (ip >= PERF_CONTEXT_MAX) {
-				context = ip;
-				continue;
-			}
-
-			switch (context) {
-			case PERF_CONTEXT_KERNEL:
-				dso = kernel_dso;
-				break;
-			default:
-				break;
-			}
-
-			sym = resolve_symbol(thread, NULL, &dso, &ip);
-
-			if (sym && call__match(sym)) {
-				entry.parent = sym;
-				break;
-			}
-		}
-	}
+	if ((sort__has_parent || callchain) && chain)
+		syms = resolve_callchain(thread, map, chain, &entry);
 
 	while (*p != NULL) {
 		parent = *p;
@@ -909,6 +1251,10 @@ hist_entry__add(struct thread *thread, struct map *map, struct dso *dso,
 
 		if (!cmp) {
 			he->count += count;
+			if (callchain) {
+				append_chain(&he->callchain, chain, syms);
+				free(syms);
+			}
 			return 0;
 		}
 
@@ -922,6 +1268,11 @@ hist_entry__add(struct thread *thread, struct map *map, struct dso *dso,
 	if (!he)
 		return -ENOMEM;
 	*he = entry;
+	if (callchain) {
+		callchain_init(&he->callchain);
+		append_chain(&he->callchain, chain, syms);
+		free(syms);
+	}
 	rb_link_node(&he->rb_node, parent, p);
 	rb_insert_color(&he->rb_node, &hist);
 
@@ -992,12 +1343,16 @@ static void collapse__resort(void)
 
 static struct rb_root output_hists;
 
-static void output__insert_entry(struct hist_entry *he)
+static void output__insert_entry(struct hist_entry *he, u64 min_callchain_hits)
 {
 	struct rb_node **p = &output_hists.rb_node;
 	struct rb_node *parent = NULL;
 	struct hist_entry *iter;
 
+	if (callchain)
+		callchain_param.sort(&he->sorted_chain, &he->callchain,
+				      min_callchain_hits, &callchain_param);
+
 	while (*p != NULL) {
 		parent = *p;
 		iter = rb_entry(parent, struct hist_entry, rb_node);
@@ -1012,11 +1367,14 @@ static void output__insert_entry(struct hist_entry *he)
 	rb_insert_color(&he->rb_node, &output_hists);
 }
 
-static void output__resort(void)
+static void output__resort(u64 total_samples)
 {
 	struct rb_node *next;
 	struct hist_entry *n;
 	struct rb_root *tree = &hist;
+	u64 min_callchain_hits;
+
+	min_callchain_hits = total_samples * (callchain_param.min_percent / 100);
 
 	if (sort__need_collapse)
 		tree = &collapse_hists;
@@ -1028,7 +1386,7 @@ static void output__resort(void)
 		next = rb_next(&n->rb_node);
 
 		rb_erase(&n->rb_node, tree);
-		output__insert_entry(n);
+		output__insert_entry(n, min_callchain_hits);
 	}
 }
 
@@ -1038,35 +1396,69 @@ static size_t output__fprintf(FILE *fp, u64 total_samples)
 	struct sort_entry *se;
 	struct rb_node *nd;
 	size_t ret = 0;
+	unsigned int width;
+	char *col_width = col_width_list_str;
 
-	fprintf(fp, "\n");
-	fprintf(fp, "#\n");
-	fprintf(fp, "# (%Ld samples)\n", (u64)total_samples);
+	init_rem_hits();
+
+	fprintf(fp, "# Samples: %Ld\n", (u64)total_samples);
 	fprintf(fp, "#\n");
 
 	fprintf(fp, "# Overhead");
+	if (show_nr_samples) {
+		if (field_sep)
+			fprintf(fp, "%cSamples", *field_sep);
+		else
+			fputs("  Samples  ", fp);
+	}
 	list_for_each_entry(se, &hist_entry__sort_list, list) {
-		if (exclude_other && (se == &sort_parent))
+		if (se->elide)
+			continue;
+		if (field_sep) {
+			fprintf(fp, "%c%s", *field_sep, se->header);
 			continue;
-		fprintf(fp, "  %s", se->header);
+		}
+		width = strlen(se->header);
+		if (se->width) {
+			if (col_width_list_str) {
+				if (col_width) {
+					*se->width = atoi(col_width);
+					col_width = strchr(col_width, ',');
+					if (col_width)
+						++col_width;
+				}
+			}
+			width = *se->width = max(*se->width, width);
+		}
+		fprintf(fp, "  %*s", width, se->header);
 	}
 	fprintf(fp, "\n");
 
+	if (field_sep)
+		goto print_entries;
+
 	fprintf(fp, "# ........");
+	if (show_nr_samples)
+		fprintf(fp, " ..........");
 	list_for_each_entry(se, &hist_entry__sort_list, list) {
-		int i;
+		unsigned int i;
 
-		if (exclude_other && (se == &sort_parent))
+		if (se->elide)
 			continue;
 
 		fprintf(fp, "  ");
-		for (i = 0; i < strlen(se->header); i++)
+		if (se->width)
+			width = *se->width;
+		else
+			width = strlen(se->header);
+		for (i = 0; i < width; i++)
 			fprintf(fp, ".");
 	}
 	fprintf(fp, "\n");
 
 	fprintf(fp, "#\n");
 
+print_entries:
 	for (nd = rb_first(&output_hists); nd; nd = rb_next(nd)) {
 		pos = rb_entry(nd, struct hist_entry, rb_node);
 		ret += hist_entry__fprintf(fp, pos, total_samples);
@@ -1075,11 +1467,13 @@ static size_t output__fprintf(FILE *fp, u64 total_samples)
 	if (sort_order == default_sort_order &&
 			parent_pattern == default_parent_pattern) {
 		fprintf(fp, "#\n");
-		fprintf(fp, "# (For more details, try: perf report --sort comm,dso,symbol)\n");
+		fprintf(fp, "# (For a higher level overview, try: perf report --sort comm,dso)\n");
 		fprintf(fp, "#\n");
 	}
 	fprintf(fp, "\n");
 
+	free(rem_sq_bracket);
+
 	return ret;
 }
 
@@ -1115,7 +1509,7 @@ static int validate_chain(struct ip_callchain *chain, event_t *event)
 }
 
 static int
-process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
+process_sample_event(event_t *event, unsigned long offset, unsigned long head)
 {
 	char level;
 	int show = 0;
@@ -1126,22 +1520,23 @@ process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
 	struct map *map = NULL;
 	void *more_data = event->ip.__more_data;
 	struct ip_callchain *chain = NULL;
+	int cpumode;
 
-	if (event->header.type & PERF_SAMPLE_PERIOD) {
+	if (sample_type & PERF_SAMPLE_PERIOD) {
 		period = *(u64 *)more_data;
 		more_data += sizeof(u64);
 	}
 
-	dprintf("%p [%p]: PERF_EVENT (IP, %d): %d: %p period: %Ld\n",
+	dprintf("%p [%p]: PERF_EVENT_SAMPLE (IP, %d): %d/%d: %p period: %Ld\n",
 		(void *)(offset + head),
 		(void *)(long)(event->header.size),
 		event->header.misc,
-		event->ip.pid,
+		event->ip.pid, event->ip.tid,
 		(void *)(long)ip,
 		(long long)period);
 
-	if (event->header.type & PERF_SAMPLE_CALLCHAIN) {
-		int i;
+	if (sample_type & PERF_SAMPLE_CALLCHAIN) {
+		unsigned int i;
 
 		chain = (void *)more_data;
 
@@ -1166,7 +1561,12 @@ process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
 		return -1;
 	}
 
-	if (event->header.misc & PERF_EVENT_MISC_KERNEL) {
+	if (comm_list && !strlist__has_entry(comm_list, thread->comm))
+		return 0;
+
+	cpumode = event->header.misc & PERF_EVENT_MISC_CPUMODE_MASK;
+
+	if (cpumode == PERF_EVENT_MISC_KERNEL) {
 		show = SHOW_KERNEL;
 		level = 'k';
 
@@ -1174,7 +1574,7 @@ process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
 
 		dprintf(" ...... dso: %s\n", dso->name);
 
-	} else if (event->header.misc & PERF_EVENT_MISC_USER) {
+	} else if (cpumode == PERF_EVENT_MISC_USER) {
 
 		show = SHOW_USER;
 		level = '.';
@@ -1182,12 +1582,22 @@ process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
 	} else {
 		show = SHOW_HV;
 		level = 'H';
+
+		dso = hypervisor_dso;
+
 		dprintf(" ...... dso: [hypervisor]\n");
 	}
 
 	if (show & show_mask) {
 		struct symbol *sym = resolve_symbol(thread, &map, &dso, &ip);
 
+		if (dso_list && (!dso || !dso->name ||
+				 !strlist__has_entry(dso_list, dso->name)))
+			return 0;
+
+		if (sym_list && (!sym || !strlist__has_entry(sym_list, sym->name)))
+			return 0;
+
 		if (hist_entry__add(thread, map, dso, sym, ip, chain, level, period)) {
 			eprintf("problem incrementing symbol count, skipping event\n");
 			return -1;
@@ -1204,10 +1614,11 @@ process_mmap_event(event_t *event, unsigned long offset, unsigned long head)
 	struct thread *thread = threads__findnew(event->mmap.pid);
 	struct map *map = map__new(&event->mmap);
 
-	dprintf("%p [%p]: PERF_EVENT_MMAP %d: [%p(%p) @ %p]: %s\n",
+	dprintf("%p [%p]: PERF_EVENT_MMAP %d/%d: [%p(%p) @ %p]: %s\n",
 		(void *)(offset + head),
 		(void *)(long)(event->header.size),
 		event->mmap.pid,
+		event->mmap.tid,
 		(void *)(long)event->mmap.start,
 		(void *)(long)event->mmap.len,
 		(void *)(long)event->mmap.pgoff,
@@ -1245,15 +1656,27 @@ process_comm_event(event_t *event, unsigned long offset, unsigned long head)
 }
 
 static int
-process_fork_event(event_t *event, unsigned long offset, unsigned long head)
+process_task_event(event_t *event, unsigned long offset, unsigned long head)
 {
 	struct thread *thread = threads__findnew(event->fork.pid);
 	struct thread *parent = threads__findnew(event->fork.ppid);
 
-	dprintf("%p [%p]: PERF_EVENT_FORK: %d:%d\n",
+	dprintf("%p [%p]: PERF_EVENT_%s: (%d:%d):(%d:%d)\n",
 		(void *)(offset + head),
 		(void *)(long)(event->header.size),
-		event->fork.pid, event->fork.ppid);
+		event->header.type == PERF_EVENT_FORK ? "FORK" : "EXIT",
+		event->fork.pid, event->fork.tid,
+		event->fork.ppid, event->fork.ptid);
+
+	/*
+	 * A thread clone will have the same PID for both
+	 * parent and child.
+	 */
+	if (thread == parent)
+		return 0;
+
+	if (event->header.type == PERF_EVENT_EXIT)
+		return 0;
 
 	if (!thread || !parent || thread__fork(thread, parent)) {
 		dprintf("problem processing PERF_EVENT_FORK, skipping event.\n");
@@ -1265,19 +1688,6 @@ process_fork_event(event_t *event, unsigned long offset, unsigned long head)
 }
 
 static int
-process_period_event(event_t *event, unsigned long offset, unsigned long head)
-{
-	dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
-		event->period.time,
-		event->period.id,
-		event->period.sample_period);
-
-	return 0;
-}
-
-static int
 process_lost_event(event_t *event, unsigned long offset, unsigned long head)
 {
 	dprintf("%p [%p]: PERF_EVENT_LOST: id:%Ld: lost:%Ld\n",
@@ -1327,15 +1737,51 @@ static void trace_event(event_t *event)
 	dprintf(".\n");
 }
 
+static struct perf_header	*header;
+
+static struct perf_counter_attr *perf_header__find_attr(u64 id)
+{
+	int i;
+
+	for (i = 0; i < header->attrs; i++) {
+		struct perf_header_attr *attr = header->attr[i];
+		int j;
+
+		for (j = 0; j < attr->ids; j++) {
+			if (attr->id[j] == id)
+				return &attr->attr;
+		}
+	}
+
+	return NULL;
+}
+
+static int
+process_read_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	struct perf_counter_attr *attr = perf_header__find_attr(event->read.id);
+
+	dprintf("%p [%p]: PERF_EVENT_READ: %d %d %s %Lu\n",
+			(void *)(offset + head),
+			(void *)(long)(event->header.size),
+			event->read.pid,
+			event->read.tid,
+			attr ? __event_name(attr->type, attr->config)
+			     : "FAIL",
+			event->read.value);
+
+	return 0;
+}
+
 static int
 process_event(event_t *event, unsigned long offset, unsigned long head)
 {
 	trace_event(event);
 
-	if (event->header.misc & PERF_EVENT_MISC_OVERFLOW)
-		return process_overflow_event(event, offset, head);
-
 	switch (event->header.type) {
+	case PERF_EVENT_SAMPLE:
+		return process_sample_event(event, offset, head);
+
 	case PERF_EVENT_MMAP:
 		return process_mmap_event(event, offset, head);
 
@@ -1343,14 +1789,15 @@ process_event(event_t *event, unsigned long offset, unsigned long head)
 		return process_comm_event(event, offset, head);
 
 	case PERF_EVENT_FORK:
-		return process_fork_event(event, offset, head);
-
-	case PERF_EVENT_PERIOD:
-		return process_period_event(event, offset, head);
+	case PERF_EVENT_EXIT:
+		return process_task_event(event, offset, head);
 
 	case PERF_EVENT_LOST:
 		return process_lost_event(event, offset, head);
 
+	case PERF_EVENT_READ:
+		return process_read_event(event, offset, head);
+
 	/*
 	 * We dont process them right now but they are fine:
 	 */
@@ -1366,13 +1813,28 @@ process_event(event_t *event, unsigned long offset, unsigned long head)
 	return 0;
 }
 
-static struct perf_file_header		file_header;
+static u64 perf_header__sample_type(void)
+{
+	u64 sample_type = 0;
+	int i;
+
+	for (i = 0; i < header->attrs; i++) {
+		struct perf_header_attr *attr = header->attr[i];
+
+		if (!sample_type)
+			sample_type = attr->attr.sample_type;
+		else if (sample_type != attr->attr.sample_type)
+			die("non matching sample_type");
+	}
+
+	return sample_type;
+}
 
 static int __cmd_report(void)
 {
 	int ret, rc = EXIT_FAILURE;
 	unsigned long offset = 0;
-	unsigned long head = sizeof(file_header);
+	unsigned long head, shift;
 	struct stat stat;
 	event_t *event;
 	uint32_t size;
@@ -1395,20 +1857,41 @@ static int __cmd_report(void)
 		exit(-1);
 	}
 
+	if (!force && (stat.st_uid != geteuid())) {
+		fprintf(stderr, "file: %s not owned by current user\n", input_name);
+		exit(-1);
+	}
+
 	if (!stat.st_size) {
 		fprintf(stderr, "zero-sized file, nothing to do!\n");
 		exit(0);
 	}
 
-	if (read(input, &file_header, sizeof(file_header)) == -1) {
-		perror("failed to read file headers");
-		exit(-1);
-	}
+	header = perf_header__read(input);
+	head = header->data_offset;
 
-	if (sort__has_parent &&
-	    !(file_header.sample_type & PERF_SAMPLE_CALLCHAIN)) {
-		fprintf(stderr, "selected --sort parent, but no callchain data\n");
-		exit(-1);
+	sample_type = perf_header__sample_type();
+
+	if (!(sample_type & PERF_SAMPLE_CALLCHAIN)) {
+		if (sort__has_parent) {
+			fprintf(stderr, "selected --sort parent, but no"
+					" callchain data. Did you call"
+					" perf record without -g?\n");
+			exit(-1);
+		}
+		if (callchain) {
+			fprintf(stderr, "selected -c but no callchain data."
+					" Did you call perf record without"
+					" -g?\n");
+			exit(-1);
+		}
+	} else if (callchain_param.mode != CHAIN_NONE && !callchain) {
+			callchain = 1;
+			if (register_callchain_param(&callchain_param) < 0) {
+				fprintf(stderr, "Can't register callchain"
+						" params\n");
+				exit(-1);
+			}
 	}
 
 	if (load_kernel() < 0) {
@@ -1426,6 +1909,11 @@ static int __cmd_report(void)
 		cwd = NULL;
 		cwdlen = 0;
 	}
+
+	shift = page_size * (head / page_size);
+	offset += shift;
+	head -= shift;
+
 remap:
 	buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ,
 			   MAP_SHARED, input, offset);
@@ -1442,9 +1930,10 @@ more:
 		size = 8;
 
 	if (head + event->header.size >= page_size * mmap_window) {
-		unsigned long shift = page_size * (head / page_size);
 		int ret;
 
+		shift = page_size * (head / page_size);
+
 		ret = munmap(buf, page_size * mmap_window);
 		assert(ret == 0);
 
@@ -1482,10 +1971,10 @@ more:
 
 	head += size;
 
-	if (offset + head >= sizeof(file_header) + file_header.data_size)
+	if (offset + head >= header->data_offset + header->data_size)
 		goto done;
 
-	if (offset + head < stat.st_size)
+	if (offset + head < (unsigned long)stat.st_size)
 		goto more;
 
 done:
@@ -1509,12 +1998,65 @@ done:
 		dsos__fprintf(stdout);
 
 	collapse__resort();
-	output__resort();
+	output__resort(total);
 	output__fprintf(stdout, total);
 
 	return rc;
 }
 
+static int
+parse_callchain_opt(const struct option *opt __used, const char *arg,
+		    int unset __used)
+{
+	char *tok;
+	char *endptr;
+
+	callchain = 1;
+
+	if (!arg)
+		return 0;
+
+	tok = strtok((char *)arg, ",");
+	if (!tok)
+		return -1;
+
+	/* get the output mode */
+	if (!strncmp(tok, "graph", strlen(arg)))
+		callchain_param.mode = CHAIN_GRAPH_ABS;
+
+	else if (!strncmp(tok, "flat", strlen(arg)))
+		callchain_param.mode = CHAIN_FLAT;
+
+	else if (!strncmp(tok, "fractal", strlen(arg)))
+		callchain_param.mode = CHAIN_GRAPH_REL;
+
+	else if (!strncmp(tok, "none", strlen(arg))) {
+		callchain_param.mode = CHAIN_NONE;
+		callchain = 0;
+
+		return 0;
+	}
+
+	else
+		return -1;
+
+	/* get the min percentage */
+	tok = strtok(NULL, ",");
+	if (!tok)
+		goto setup;
+
+	callchain_param.min_percent = strtod(tok, &endptr);
+	if (tok == endptr)
+		return -1;
+
+setup:
+	if (register_callchain_param(&callchain_param) < 0) {
+		fprintf(stderr, "Can't register callchain params\n");
+		return -1;
+	}
+	return 0;
+}
+
 static const char * const report_usage[] = {
 	"perf report [<options>] <command>",
 	NULL
@@ -1528,6 +2070,11 @@ static const struct option options[] = {
 	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
 		    "dump raw trace in ASCII"),
 	OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
+	OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
+	OPT_BOOLEAN('m', "modules", &modules,
+		    "load module symbols - WARNING: use only with -k and LIVE kernel"),
+	OPT_BOOLEAN('n', "show-nr-samples", &show_nr_samples,
+		    "Show a column with the number of samples"),
 	OPT_STRING('s', "sort", &sort_order, "key[,key2...]",
 		   "sort by key(s): pid, comm, dso, symbol, parent"),
 	OPT_BOOLEAN('P', "full-paths", &full_paths,
@@ -1536,6 +2083,21 @@ static const struct option options[] = {
 		   "regex filter to identify parent, see: '--sort parent'"),
 	OPT_BOOLEAN('x', "exclude-other", &exclude_other,
 		    "Only display entries with parent-match"),
+	OPT_CALLBACK_DEFAULT('g', "call-graph", NULL, "output_type,min_percent",
+		     "Display callchains using output_type and min percent threshold. "
+		     "Default: fractal,0.5", &parse_callchain_opt, callchain_default_opt),
+	OPT_STRING('d', "dsos", &dso_list_str, "dso[,dso...]",
+		   "only consider symbols in these dsos"),
+	OPT_STRING('C', "comms", &comm_list_str, "comm[,comm...]",
+		   "only consider symbols in these comms"),
+	OPT_STRING('S', "symbols", &sym_list_str, "symbol[,symbol...]",
+		   "only consider these symbols"),
+	OPT_STRING('w', "column-widths", &col_width_list_str,
+		   "width[,width...]",
+		   "don't try to adjust column width, use these fixed values"),
+	OPT_STRING('t', "field-separator", &field_sep, "separator",
+		   "separator for columns, no spaces will be added between "
+		   "columns '.' is reserved."),
 	OPT_END()
 };
 
@@ -1554,7 +2116,26 @@ static void setup_sorting(void)
 	free(str);
 }
 
-int cmd_report(int argc, const char **argv, const char *prefix)
+static void setup_list(struct strlist **list, const char *list_str,
+		       struct sort_entry *se, const char *list_name,
+		       FILE *fp)
+{
+	if (list_str) {
+		*list = strlist__new(true, list_str);
+		if (!*list) {
+			fprintf(stderr, "problems parsing %s list\n",
+				list_name);
+			exit(129);
+		}
+		if (strlist__nr_entries(*list) == 1) {
+			fprintf(fp, "# %s: %s\n", list_name,
+				strlist__entry(*list, 0)->s);
+			se->elide = true;
+		}
+	}
+}
+
+int cmd_report(int argc, const char **argv, const char *prefix __used)
 {
 	symbol__init();
 
@@ -1564,9 +2145,10 @@ int cmd_report(int argc, const char **argv, const char *prefix)
 
 	setup_sorting();
 
-	if (parent_pattern != default_parent_pattern)
+	if (parent_pattern != default_parent_pattern) {
 		sort_dimension__add("parent");
-	else
+		sort_parent.elide = 1;
+	} else
 		exclude_other = 0;
 
 	/*
@@ -1577,5 +2159,15 @@ int cmd_report(int argc, const char **argv, const char *prefix)
 
 	setup_pager();
 
+	setup_list(&dso_list, dso_list_str, &sort_dso, "dso", stdout);
+	setup_list(&comm_list, comm_list_str, &sort_comm, "comm", stdout);
+	setup_list(&sym_list, sym_list_str, &sort_sym, "symbol", stdout);
+
+	if (field_sep && *field_sep == '.') {
+		fputs("'.' is the only non valid --field-separator argument\n",
+		      stderr);
+		exit(129);
+	}
+
 	return __cmd_report();
 }
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 6d3eeac1ea2..b4b06c7903e 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -32,6 +32,7 @@
  *   Wu Fengguang <fengguang.wu@intel.com>
  *   Mike Galbraith <efault@gmx.de>
  *   Paul Mackerras <paulus@samba.org>
+ *   Jaswinder Singh Rajput <jaswinder@kernel.org>
  *
  * Released under the GPL v2. (and only v2, not any later version)
  */
@@ -45,7 +46,7 @@
 #include <sys/prctl.h>
 #include <math.h>
 
-static struct perf_counter_attr default_attrs[MAX_COUNTERS] = {
+static struct perf_counter_attr default_attrs[] = {
 
   { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK	},
   { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES},
@@ -59,42 +60,28 @@ static struct perf_counter_attr default_attrs[MAX_COUNTERS] = {
 
 };
 
+#define MAX_RUN			100
+
 static int			system_wide			=  0;
-static int			inherit				=  1;
 static int			verbose				=  0;
+static unsigned int		nr_cpus				=  0;
+static int			run_idx				=  0;
 
-static int			fd[MAX_NR_CPUS][MAX_COUNTERS];
-
-static int			target_pid			= -1;
-static int			nr_cpus				=  0;
-static unsigned int		page_size;
-
+static int			run_count			=  1;
+static int			inherit				=  1;
 static int			scale				=  1;
+static int			target_pid			= -1;
+static int			null_run			=  0;
 
-static const unsigned int default_count[] = {
-	1000000,
-	1000000,
-	  10000,
-	  10000,
-	1000000,
-	  10000,
-};
-
-#define MAX_RUN 100
-
-static int			run_count		=  1;
-static int			run_idx			=  0;
-
-static u64			event_res[MAX_RUN][MAX_COUNTERS][3];
-static u64			event_scaled[MAX_RUN][MAX_COUNTERS];
-
-//static u64			event_hist[MAX_RUN][MAX_COUNTERS][3];
-
+static int			fd[MAX_NR_CPUS][MAX_COUNTERS];
 
 static u64			runtime_nsecs[MAX_RUN];
 static u64			walltime_nsecs[MAX_RUN];
 static u64			runtime_cycles[MAX_RUN];
 
+static u64			event_res[MAX_RUN][MAX_COUNTERS][3];
+static u64			event_scaled[MAX_RUN][MAX_COUNTERS];
+
 static u64			event_res_avg[MAX_COUNTERS][3];
 static u64			event_res_noise[MAX_COUNTERS][3];
 
@@ -109,7 +96,14 @@ static u64			walltime_nsecs_noise;
 static u64			runtime_cycles_avg;
 static u64			runtime_cycles_noise;
 
-static void create_perf_stat_counter(int counter)
+#define MATCH_EVENT(t, c, counter)			\
+	(attrs[counter].type == PERF_TYPE_##t &&	\
+	 attrs[counter].config == PERF_COUNT_##c)
+
+#define ERR_PERF_OPEN \
+"Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n"
+
+static void create_perf_stat_counter(int counter, int pid)
 {
 	struct perf_counter_attr *attr = attrs + counter;
 
@@ -118,21 +112,23 @@ static void create_perf_stat_counter(int counter)
 				    PERF_FORMAT_TOTAL_TIME_RUNNING;
 
 	if (system_wide) {
-		int cpu;
-		for (cpu = 0; cpu < nr_cpus; cpu ++) {
+		unsigned int cpu;
+
+		for (cpu = 0; cpu < nr_cpus; cpu++) {
 			fd[cpu][counter] = sys_perf_counter_open(attr, -1, cpu, -1, 0);
-			if (fd[cpu][counter] < 0 && verbose) {
-				printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[cpu][counter], strerror(errno));
-			}
+			if (fd[cpu][counter] < 0 && verbose)
+				fprintf(stderr, ERR_PERF_OPEN, counter,
+					fd[cpu][counter], strerror(errno));
 		}
 	} else {
-		attr->inherit	= inherit;
-		attr->disabled	= 1;
-
-		fd[0][counter] = sys_perf_counter_open(attr, 0, -1, -1, 0);
-		if (fd[0][counter] < 0 && verbose) {
-			printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[0][counter], strerror(errno));
-		}
+		attr->inherit	     = inherit;
+		attr->disabled	     = 1;
+		attr->enable_on_exec = 1;
+
+		fd[0][counter] = sys_perf_counter_open(attr, pid, -1, -1, 0);
+		if (fd[0][counter] < 0 && verbose)
+			fprintf(stderr, ERR_PERF_OPEN, counter,
+				fd[0][counter], strerror(errno));
 	}
 }
 
@@ -141,13 +137,8 @@ static void create_perf_stat_counter(int counter)
  */
 static inline int nsec_counter(int counter)
 {
-	if (attrs[counter].type != PERF_TYPE_SOFTWARE)
-		return 0;
-
-	if (attrs[counter].config == PERF_COUNT_SW_CPU_CLOCK)
-		return 1;
-
-	if (attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK)
+	if (MATCH_EVENT(SOFTWARE, SW_CPU_CLOCK, counter) ||
+	    MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter))
 		return 1;
 
 	return 0;
@@ -159,8 +150,8 @@ static inline int nsec_counter(int counter)
 static void read_counter(int counter)
 {
 	u64 *count, single_count[3];
-	ssize_t res;
-	int cpu, nv;
+	unsigned int cpu;
+	size_t res, nv;
 	int scaled;
 
 	count = event_res[run_idx][counter];
@@ -168,12 +159,13 @@ static void read_counter(int counter)
 	count[0] = count[1] = count[2] = 0;
 
 	nv = scale ? 3 : 1;
-	for (cpu = 0; cpu < nr_cpus; cpu ++) {
+	for (cpu = 0; cpu < nr_cpus; cpu++) {
 		if (fd[cpu][counter] < 0)
 			continue;
 
 		res = read(fd[cpu][counter], single_count, nv * sizeof(u64));
 		assert(res == nv * sizeof(u64));
+
 		close(fd[cpu][counter]);
 		fd[cpu][counter] = -1;
 
@@ -201,46 +193,81 @@ static void read_counter(int counter)
 	/*
 	 * Save the full runtime - to allow normalization during printout:
 	 */
-	if (attrs[counter].type == PERF_TYPE_SOFTWARE &&
-		attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK)
+	if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter))
 		runtime_nsecs[run_idx] = count[0];
-	if (attrs[counter].type == PERF_TYPE_HARDWARE &&
-		attrs[counter].config == PERF_COUNT_HW_CPU_CYCLES)
+	if (MATCH_EVENT(HARDWARE, HW_CPU_CYCLES, counter))
 		runtime_cycles[run_idx] = count[0];
 }
 
-static int run_perf_stat(int argc, const char **argv)
+static int run_perf_stat(int argc __used, const char **argv)
 {
 	unsigned long long t0, t1;
 	int status = 0;
 	int counter;
 	int pid;
+	int child_ready_pipe[2], go_pipe[2];
+	char buf;
 
 	if (!system_wide)
 		nr_cpus = 1;
 
-	for (counter = 0; counter < nr_counters; counter++)
-		create_perf_stat_counter(counter);
-
-	/*
-	 * Enable counters and exec the command:
-	 */
-	t0 = rdclock();
-	prctl(PR_TASK_PERF_COUNTERS_ENABLE);
+	if (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0) {
+		perror("failed to create pipes");
+		exit(1);
+	}
 
 	if ((pid = fork()) < 0)
 		perror("failed to fork");
 
 	if (!pid) {
-		if (execvp(argv[0], (char **)argv)) {
-			perror(argv[0]);
-			exit(-1);
-		}
+		close(child_ready_pipe[0]);
+		close(go_pipe[1]);
+		fcntl(go_pipe[0], F_SETFD, FD_CLOEXEC);
+
+		/*
+		 * Do a dummy execvp to get the PLT entry resolved,
+		 * so we avoid the resolver overhead on the real
+		 * execvp call.
+		 */
+		execvp("", (char **)argv);
+
+		/*
+		 * Tell the parent we're ready to go
+		 */
+		close(child_ready_pipe[1]);
+
+		/*
+		 * Wait until the parent tells us to go.
+		 */
+		if (read(go_pipe[0], &buf, 1) == -1)
+			perror("unable to read pipe");
+
+		execvp(argv[0], (char **)argv);
+
+		perror(argv[0]);
+		exit(-1);
 	}
 
+	/*
+	 * Wait for the child to be ready to exec.
+	 */
+	close(child_ready_pipe[1]);
+	close(go_pipe[0]);
+	if (read(child_ready_pipe[0], &buf, 1) == -1)
+		perror("unable to read pipe");
+	close(child_ready_pipe[0]);
+
+	for (counter = 0; counter < nr_counters; counter++)
+		create_perf_stat_counter(counter, pid);
+
+	/*
+	 * Enable counters and exec the command:
+	 */
+	t0 = rdclock();
+
+	close(go_pipe[1]);
 	wait(&status);
 
-	prctl(PR_TASK_PERF_COUNTERS_DISABLE);
 	t1 = rdclock();
 
 	walltime_nsecs[run_idx] = t1 - t0;
@@ -262,11 +289,9 @@ static void nsec_printout(int counter, u64 *count, u64 *noise)
 {
 	double msecs = (double)count[0] / 1000000;
 
-	fprintf(stderr, " %14.6f  %-20s", msecs, event_name(counter));
-
-	if (attrs[counter].type == PERF_TYPE_SOFTWARE &&
-		attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) {
+	fprintf(stderr, " %14.6f  %-24s", msecs, event_name(counter));
 
+	if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter)) {
 		if (walltime_nsecs_avg)
 			fprintf(stderr, " # %10.3f CPUs ",
 				(double)count[0] / (double)walltime_nsecs_avg);
@@ -276,12 +301,10 @@ static void nsec_printout(int counter, u64 *count, u64 *noise)
 
 static void abs_printout(int counter, u64 *count, u64 *noise)
 {
-	fprintf(stderr, " %14Ld  %-20s", count[0], event_name(counter));
+	fprintf(stderr, " %14Ld  %-24s", count[0], event_name(counter));
 
 	if (runtime_cycles_avg &&
-		attrs[counter].type == PERF_TYPE_HARDWARE &&
-			attrs[counter].config == PERF_COUNT_HW_INSTRUCTIONS) {
-
+	    MATCH_EVENT(HARDWARE, HW_INSTRUCTIONS, counter)) {
 		fprintf(stderr, " # %10.3f IPC  ",
 			(double)count[0] / (double)runtime_cycles_avg);
 	} else {
@@ -306,7 +329,7 @@ static void print_counter(int counter)
 	scaled = event_scaled_avg[counter];
 
 	if (scaled == -1) {
-		fprintf(stderr, " %14s  %-20s\n",
+		fprintf(stderr, " %14s  %-24s\n",
 			"<not counted>", event_name(counter));
 		return;
 	}
@@ -364,8 +387,11 @@ static void calc_avg(void)
 				event_res_avg[j]+1, event_res[i][j]+1);
 			update_avg("counter/2", j,
 				event_res_avg[j]+2, event_res[i][j]+2);
-			update_avg("scaled", j,
-				event_scaled_avg + j, event_scaled[i]+j);
+			if (event_scaled[i][j] != (u64)-1)
+				update_avg("scaled", j,
+					event_scaled_avg + j, event_scaled[i]+j);
+			else
+				event_scaled_avg[j] = -1;
 		}
 	}
 	runtime_nsecs_avg /= run_count;
@@ -429,11 +455,14 @@ static void print_stat(int argc, const char **argv)
 	for (counter = 0; counter < nr_counters; counter++)
 		print_counter(counter);
 
-
 	fprintf(stderr, "\n");
-	fprintf(stderr, " %14.9f  seconds time elapsed.\n",
+	fprintf(stderr, " %14.9f  seconds time elapsed",
 			(double)walltime_nsecs_avg/1e9);
-	fprintf(stderr, "\n");
+	if (run_count > 1) {
+		fprintf(stderr, "   ( +- %7.3f%% )",
+			100.0*(double)walltime_nsecs_noise/(double)walltime_nsecs_avg);
+	}
+	fprintf(stderr, "\n\n");
 }
 
 static volatile int signr = -1;
@@ -466,36 +495,38 @@ static const struct option options[] = {
 	OPT_INTEGER('p', "pid", &target_pid,
 		    "stat events on existing pid"),
 	OPT_BOOLEAN('a', "all-cpus", &system_wide,
-			    "system-wide collection from all CPUs"),
-	OPT_BOOLEAN('S', "scale", &scale,
-			    "scale/normalize counters"),
+		    "system-wide collection from all CPUs"),
+	OPT_BOOLEAN('c', "scale", &scale,
+		    "scale/normalize counters"),
 	OPT_BOOLEAN('v', "verbose", &verbose,
 		    "be more verbose (show counter open errors, etc)"),
 	OPT_INTEGER('r', "repeat", &run_count,
 		    "repeat command and print average + stddev (max: 100)"),
+	OPT_BOOLEAN('n', "null", &null_run,
+		    "null run - dont start any counters"),
 	OPT_END()
 };
 
-int cmd_stat(int argc, const char **argv, const char *prefix)
+int cmd_stat(int argc, const char **argv, const char *prefix __used)
 {
 	int status;
 
-	page_size = sysconf(_SC_PAGE_SIZE);
-
-	memcpy(attrs, default_attrs, sizeof(attrs));
-
-	argc = parse_options(argc, argv, options, stat_usage, 0);
+	argc = parse_options(argc, argv, options, stat_usage,
+		PARSE_OPT_STOP_AT_NON_OPTION);
 	if (!argc)
 		usage_with_options(stat_usage, options);
 	if (run_count <= 0 || run_count > MAX_RUN)
 		usage_with_options(stat_usage, options);
 
-	if (!nr_counters)
-		nr_counters = 8;
+	/* Set attrs and nr_counters if no event is selected and !null_run */
+	if (!null_run && !nr_counters) {
+		memcpy(attrs, default_attrs, sizeof(default_attrs));
+		nr_counters = ARRAY_SIZE(default_attrs);
+	}
 
 	nr_cpus = sysconf(_SC_NPROCESSORS_ONLN);
 	assert(nr_cpus <= MAX_NR_CPUS);
-	assert(nr_cpus >= 0);
+	assert((int)nr_cpus >= 0);
 
 	/*
 	 * We dont want to block the signals - that would cause
@@ -511,7 +542,7 @@ int cmd_stat(int argc, const char **argv, const char *prefix)
 	status = 0;
 	for (run_idx = 0; run_idx < run_count; run_idx++) {
 		if (run_count != 1 && verbose)
-			fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx+1);
+			fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx + 1);
 		status = run_perf_stat(argc, argv);
 	}
 
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 5352b5e352e..7de28ce9ca2 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -23,7 +23,7 @@
 #include "util/symbol.h"
 #include "util/color.h"
 #include "util/util.h"
-#include "util/rbtree.h"
+#include <linux/rbtree.h>
 #include "util/parse-options.h"
 #include "util/parse-events.h"
 
@@ -31,6 +31,8 @@
 #include <fcntl.h>
 
 #include <stdio.h>
+#include <termios.h>
+#include <unistd.h>
 
 #include <errno.h>
 #include <time.h>
@@ -54,10 +56,11 @@ static int			system_wide			=  0;
 
 static int			default_interval		= 100000;
 
-static u64			count_filter			=  5;
+static int			count_filter			=  5;
 static int			print_entries			= 15;
 
 static int			target_pid			= -1;
+static int			inherit				=  0;
 static int			profile_cpu			= -1;
 static int			nr_cpus				=  0;
 static unsigned int		realtime_prio			=  0;
@@ -66,16 +69,30 @@ static unsigned int		page_size;
 static unsigned int		mmap_pages			= 16;
 static int			freq				=  0;
 static int			verbose				=  0;
-
-static char			*sym_filter;
-static unsigned long		filter_start;
-static unsigned long		filter_end;
+static char			*vmlinux			=  NULL;
 
 static int			delay_secs			=  2;
 static int			zero;
 static int			dump_symtab;
 
 /*
+ * Source
+ */
+
+struct source_line {
+	u64			eip;
+	unsigned long		count[MAX_COUNTERS];
+	char			*line;
+	struct source_line	*next;
+};
+
+static char			*sym_filter			=  NULL;
+struct sym_entry		*sym_filter_entry		=  NULL;
+static int			sym_pcnt_filter			=  5;
+static int			sym_counter			=  0;
+static int			display_weighted		= -1;
+
+/*
  * Symbols
  */
 
@@ -89,9 +106,237 @@ struct sym_entry {
 	unsigned long		snap_count;
 	double			weight;
 	int			skip;
+	struct source_line	*source;
+	struct source_line	*lines;
+	struct source_line	**lines_tail;
+	pthread_mutex_t		source_lock;
 };
 
-struct sym_entry		*sym_filter_entry;
+/*
+ * Source functions
+ */
+
+static void parse_source(struct sym_entry *syme)
+{
+	struct symbol *sym;
+	struct module *module;
+	struct section *section = NULL;
+	FILE *file;
+	char command[PATH_MAX*2], *path = vmlinux;
+	u64 start, end, len;
+
+	if (!syme)
+		return;
+
+	if (syme->lines) {
+		pthread_mutex_lock(&syme->source_lock);
+		goto out_assign;
+	}
+
+	sym = (struct symbol *)(syme + 1);
+	module = sym->module;
+
+	if (module)
+		path = module->path;
+	if (!path)
+		return;
+
+	start = sym->obj_start;
+	if (!start)
+		start = sym->start;
+
+	if (module) {
+		section = module->sections->find_section(module->sections, ".text");
+		if (section)
+			start -= section->vma;
+	}
+
+	end = start + sym->end - sym->start + 1;
+	len = sym->end - sym->start;
+
+	sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s", start, end, path);
+
+	file = popen(command, "r");
+	if (!file)
+		return;
+
+	pthread_mutex_lock(&syme->source_lock);
+	syme->lines_tail = &syme->lines;
+	while (!feof(file)) {
+		struct source_line *src;
+		size_t dummy = 0;
+		char *c;
+
+		src = malloc(sizeof(struct source_line));
+		assert(src != NULL);
+		memset(src, 0, sizeof(struct source_line));
+
+		if (getline(&src->line, &dummy, file) < 0)
+			break;
+		if (!src->line)
+			break;
+
+		c = strchr(src->line, '\n');
+		if (c)
+			*c = 0;
+
+		src->next = NULL;
+		*syme->lines_tail = src;
+		syme->lines_tail = &src->next;
+
+		if (strlen(src->line)>8 && src->line[8] == ':') {
+			src->eip = strtoull(src->line, NULL, 16);
+			if (section)
+				src->eip += section->vma;
+		}
+		if (strlen(src->line)>8 && src->line[16] == ':') {
+			src->eip = strtoull(src->line, NULL, 16);
+			if (section)
+				src->eip += section->vma;
+		}
+	}
+	pclose(file);
+out_assign:
+	sym_filter_entry = syme;
+	pthread_mutex_unlock(&syme->source_lock);
+}
+
+static void __zero_source_counters(struct sym_entry *syme)
+{
+	int i;
+	struct source_line *line;
+
+	line = syme->lines;
+	while (line) {
+		for (i = 0; i < nr_counters; i++)
+			line->count[i] = 0;
+		line = line->next;
+	}
+}
+
+static void record_precise_ip(struct sym_entry *syme, int counter, u64 ip)
+{
+	struct source_line *line;
+
+	if (syme != sym_filter_entry)
+		return;
+
+	if (pthread_mutex_trylock(&syme->source_lock))
+		return;
+
+	if (!syme->source)
+		goto out_unlock;
+
+	for (line = syme->lines; line; line = line->next) {
+		if (line->eip == ip) {
+			line->count[counter]++;
+			break;
+		}
+		if (line->eip > ip)
+			break;
+	}
+out_unlock:
+	pthread_mutex_unlock(&syme->source_lock);
+}
+
+static void lookup_sym_source(struct sym_entry *syme)
+{
+	struct symbol *symbol = (struct symbol *)(syme + 1);
+	struct source_line *line;
+	char pattern[PATH_MAX];
+	char *idx;
+
+	sprintf(pattern, "<%s>:", symbol->name);
+
+	if (symbol->module) {
+		idx = strstr(pattern, "\t");
+		if (idx)
+			*idx = 0;
+	}
+
+	pthread_mutex_lock(&syme->source_lock);
+	for (line = syme->lines; line; line = line->next) {
+		if (strstr(line->line, pattern)) {
+			syme->source = line;
+			break;
+		}
+	}
+	pthread_mutex_unlock(&syme->source_lock);
+}
+
+static void show_lines(struct source_line *queue, int count, int total)
+{
+	int i;
+	struct source_line *line;
+
+	line = queue;
+	for (i = 0; i < count; i++) {
+		float pcnt = 100.0*(float)line->count[sym_counter]/(float)total;
+
+		printf("%8li %4.1f%%\t%s\n", line->count[sym_counter], pcnt, line->line);
+		line = line->next;
+	}
+}
+
+#define TRACE_COUNT     3
+
+static void show_details(struct sym_entry *syme)
+{
+	struct symbol *symbol;
+	struct source_line *line;
+	struct source_line *line_queue = NULL;
+	int displayed = 0;
+	int line_queue_count = 0, total = 0, more = 0;
+
+	if (!syme)
+		return;
+
+	if (!syme->source)
+		lookup_sym_source(syme);
+
+	if (!syme->source)
+		return;
+
+	symbol = (struct symbol *)(syme + 1);
+	printf("Showing %s for %s\n", event_name(sym_counter), symbol->name);
+	printf("  Events  Pcnt (>=%d%%)\n", sym_pcnt_filter);
+
+	pthread_mutex_lock(&syme->source_lock);
+	line = syme->source;
+	while (line) {
+		total += line->count[sym_counter];
+		line = line->next;
+	}
+
+	line = syme->source;
+	while (line) {
+		float pcnt = 0.0;
+
+		if (!line_queue_count)
+			line_queue = line;
+		line_queue_count++;
+
+		if (line->count[sym_counter])
+			pcnt = 100.0 * line->count[sym_counter] / (float)total;
+		if (pcnt >= (float)sym_pcnt_filter) {
+			if (displayed <= print_entries)
+				show_lines(line_queue, line_queue_count, total);
+			else more++;
+			displayed += line_queue_count;
+			line_queue_count = 0;
+			line_queue = NULL;
+		} else if (line_queue_count > TRACE_COUNT) {
+			line_queue = line_queue->next;
+			line_queue_count--;
+		}
+
+		line->count[sym_counter] = zero ? 0 : line->count[sym_counter] * 7 / 8;
+		line = line->next;
+	}
+	pthread_mutex_unlock(&syme->source_lock);
+	if (more)
+		printf("%d lines not displayed, maybe increase display entries [e]\n", more);
+}
 
 struct dso			*kernel_dso;
 
@@ -110,6 +355,9 @@ static double sym_weight(const struct sym_entry *sym)
 	double weight = sym->snap_count;
 	int counter;
 
+	if (!display_weighted)
+		return weight;
+
 	for (counter = 1; counter < nr_counters-1; counter++)
 		weight *= sym->count[counter];
 
@@ -157,7 +405,7 @@ static void rb_insert_active_sym(struct rb_root *tree, struct sym_entry *se)
 static void print_sym_table(void)
 {
 	int printed = 0, j;
-	int counter;
+	int counter, snap = !display_weighted ? sym_counter : 0;
 	float samples_per_sec = samples/delay_secs;
 	float ksamples_per_sec = (samples-userspace_samples)/delay_secs;
 	float sum_ksamples = 0.0;
@@ -173,7 +421,7 @@ static void print_sym_table(void)
 	pthread_mutex_unlock(&active_symbols_lock);
 
 	list_for_each_entry_safe_from(syme, n, &active_symbols, node) {
-		syme->snap_count = syme->count[0];
+		syme->snap_count = syme->count[snap];
 		if (syme->snap_count != 0) {
 			syme->weight = sym_weight(syme);
 			rb_insert_active_sym(&tmp, syme);
@@ -193,7 +441,7 @@ static void print_sym_table(void)
 		samples_per_sec,
 		100.0 - (100.0*((samples_per_sec-ksamples_per_sec)/samples_per_sec)));
 
-	if (nr_counters == 1) {
+	if (nr_counters == 1 || !display_weighted) {
 		printf("%Ld", (u64)attrs[0].sample_period);
 		if (freq)
 			printf("Hz ");
@@ -201,7 +449,9 @@ static void print_sym_table(void)
 			printf(" ");
 	}
 
-	for (counter = 0; counter < nr_counters; counter++) {
+	if (!display_weighted)
+		printf("%s", event_name(sym_counter));
+	else for (counter = 0; counter < nr_counters; counter++) {
 		if (counter)
 			printf("/");
 
@@ -226,6 +476,11 @@ static void print_sym_table(void)
 
 	printf("------------------------------------------------------------------------------\n\n");
 
+	if (sym_filter_entry) {
+		show_details(sym_filter_entry);
+		return;
+	}
+
 	if (nr_counters == 1)
 		printf("             samples    pcnt");
 	else
@@ -238,59 +493,300 @@ static void print_sym_table(void)
 	for (nd = rb_first(&tmp); nd; nd = rb_next(nd)) {
 		struct sym_entry *syme = rb_entry(nd, struct sym_entry, rb_node);
 		struct symbol *sym = (struct symbol *)(syme + 1);
-		char *color = PERF_COLOR_NORMAL;
 		double pcnt;
 
-		if (++printed > print_entries || syme->snap_count < count_filter)
+		if (++printed > print_entries || (int)syme->snap_count < count_filter)
 			continue;
 
 		pcnt = 100.0 - (100.0 * ((sum_ksamples - syme->snap_count) /
 					 sum_ksamples));
 
-		/*
-		 * We color high-overhead entries in red, mid-overhead
-		 * entries in green - and keep the low overhead places
-		 * normal:
-		 */
-		if (pcnt >= 5.0) {
-			color = PERF_COLOR_RED;
-		} else {
-			if (pcnt >= 0.5)
-				color = PERF_COLOR_GREEN;
-		}
-
-		if (nr_counters == 1)
+		if (nr_counters == 1 || !display_weighted)
 			printf("%20.2f - ", syme->weight);
 		else
 			printf("%9.1f %10ld - ", syme->weight, syme->snap_count);
 
-		color_fprintf(stdout, color, "%4.1f%%", pcnt);
-		printf(" - %016llx : %s\n", sym->start, sym->name);
+		percent_color_fprintf(stdout, "%4.1f%%", pcnt);
+		printf(" - %016llx : %s", sym->start, sym->name);
+		if (sym->module)
+			printf("\t[%s]", sym->module->name);
+		printf("\n");
+	}
+}
+
+static void prompt_integer(int *target, const char *msg)
+{
+	char *buf = malloc(0), *p;
+	size_t dummy = 0;
+	int tmp;
+
+	fprintf(stdout, "\n%s: ", msg);
+	if (getline(&buf, &dummy, stdin) < 0)
+		return;
+
+	p = strchr(buf, '\n');
+	if (p)
+		*p = 0;
+
+	p = buf;
+	while(*p) {
+		if (!isdigit(*p))
+			goto out_free;
+		p++;
+	}
+	tmp = strtoul(buf, NULL, 10);
+	*target = tmp;
+out_free:
+	free(buf);
+}
+
+static void prompt_percent(int *target, const char *msg)
+{
+	int tmp = 0;
+
+	prompt_integer(&tmp, msg);
+	if (tmp >= 0 && tmp <= 100)
+		*target = tmp;
+}
+
+static void prompt_symbol(struct sym_entry **target, const char *msg)
+{
+	char *buf = malloc(0), *p;
+	struct sym_entry *syme = *target, *n, *found = NULL;
+	size_t dummy = 0;
+
+	/* zero counters of active symbol */
+	if (syme) {
+		pthread_mutex_lock(&syme->source_lock);
+		__zero_source_counters(syme);
+		*target = NULL;
+		pthread_mutex_unlock(&syme->source_lock);
+	}
+
+	fprintf(stdout, "\n%s: ", msg);
+	if (getline(&buf, &dummy, stdin) < 0)
+		goto out_free;
+
+	p = strchr(buf, '\n');
+	if (p)
+		*p = 0;
+
+	pthread_mutex_lock(&active_symbols_lock);
+	syme = list_entry(active_symbols.next, struct sym_entry, node);
+	pthread_mutex_unlock(&active_symbols_lock);
+
+	list_for_each_entry_safe_from(syme, n, &active_symbols, node) {
+		struct symbol *sym = (struct symbol *)(syme + 1);
+
+		if (!strcmp(buf, sym->name)) {
+			found = syme;
+			break;
+		}
 	}
+
+	if (!found) {
+		fprintf(stderr, "Sorry, %s is not active.\n", sym_filter);
+		sleep(1);
+		return;
+	} else
+		parse_source(found);
+
+out_free:
+	free(buf);
 }
 
-static void *display_thread(void *arg)
+static void print_mapped_keys(void)
+{
+	char *name = NULL;
+
+	if (sym_filter_entry) {
+		struct symbol *sym = (struct symbol *)(sym_filter_entry+1);
+		name = sym->name;
+	}
+
+	fprintf(stdout, "\nMapped keys:\n");
+	fprintf(stdout, "\t[d]     display refresh delay.             \t(%d)\n", delay_secs);
+	fprintf(stdout, "\t[e]     display entries (lines).           \t(%d)\n", print_entries);
+
+	if (nr_counters > 1)
+		fprintf(stdout, "\t[E]     active event counter.              \t(%s)\n", event_name(sym_counter));
+
+	fprintf(stdout, "\t[f]     profile display filter (count).    \t(%d)\n", count_filter);
+
+	if (vmlinux) {
+		fprintf(stdout, "\t[F]     annotate display filter (percent). \t(%d%%)\n", sym_pcnt_filter);
+		fprintf(stdout, "\t[s]     annotate symbol.                   \t(%s)\n", name?: "NULL");
+		fprintf(stdout, "\t[S]     stop annotation.\n");
+	}
+
+	if (nr_counters > 1)
+		fprintf(stdout, "\t[w]     toggle display weighted/count[E]r. \t(%d)\n", display_weighted ? 1 : 0);
+
+	fprintf(stdout, "\t[z]     toggle sample zeroing.             \t(%d)\n", zero ? 1 : 0);
+	fprintf(stdout, "\t[qQ]    quit.\n");
+}
+
+static int key_mapped(int c)
+{
+	switch (c) {
+		case 'd':
+		case 'e':
+		case 'f':
+		case 'z':
+		case 'q':
+		case 'Q':
+			return 1;
+		case 'E':
+		case 'w':
+			return nr_counters > 1 ? 1 : 0;
+		case 'F':
+		case 's':
+		case 'S':
+			return vmlinux ? 1 : 0;
+	}
+
+	return 0;
+}
+
+static void handle_keypress(int c)
+{
+	if (!key_mapped(c)) {
+		struct pollfd stdin_poll = { .fd = 0, .events = POLLIN };
+		struct termios tc, save;
+
+		print_mapped_keys();
+		fprintf(stdout, "\nEnter selection, or unmapped key to continue: ");
+		fflush(stdout);
+
+		tcgetattr(0, &save);
+		tc = save;
+		tc.c_lflag &= ~(ICANON | ECHO);
+		tc.c_cc[VMIN] = 0;
+		tc.c_cc[VTIME] = 0;
+		tcsetattr(0, TCSANOW, &tc);
+
+		poll(&stdin_poll, 1, -1);
+		c = getc(stdin);
+
+		tcsetattr(0, TCSAFLUSH, &save);
+		if (!key_mapped(c))
+			return;
+	}
+
+	switch (c) {
+		case 'd':
+			prompt_integer(&delay_secs, "Enter display delay");
+			break;
+		case 'e':
+			prompt_integer(&print_entries, "Enter display entries (lines)");
+			break;
+		case 'E':
+			if (nr_counters > 1) {
+				int i;
+
+				fprintf(stderr, "\nAvailable events:");
+				for (i = 0; i < nr_counters; i++)
+					fprintf(stderr, "\n\t%d %s", i, event_name(i));
+
+				prompt_integer(&sym_counter, "Enter details event counter");
+
+				if (sym_counter >= nr_counters) {
+					fprintf(stderr, "Sorry, no such event, using %s.\n", event_name(0));
+					sym_counter = 0;
+					sleep(1);
+				}
+			} else sym_counter = 0;
+			break;
+		case 'f':
+			prompt_integer(&count_filter, "Enter display event count filter");
+			break;
+		case 'F':
+			prompt_percent(&sym_pcnt_filter, "Enter details display event filter (percent)");
+			break;
+		case 'q':
+		case 'Q':
+			printf("exiting.\n");
+			exit(0);
+		case 's':
+			prompt_symbol(&sym_filter_entry, "Enter details symbol");
+			break;
+		case 'S':
+			if (!sym_filter_entry)
+				break;
+			else {
+				struct sym_entry *syme = sym_filter_entry;
+
+				pthread_mutex_lock(&syme->source_lock);
+				sym_filter_entry = NULL;
+				__zero_source_counters(syme);
+				pthread_mutex_unlock(&syme->source_lock);
+			}
+			break;
+		case 'w':
+			display_weighted = ~display_weighted;
+			break;
+		case 'z':
+			zero = ~zero;
+			break;
+	}
+}
+
+static void *display_thread(void *arg __used)
 {
 	struct pollfd stdin_poll = { .fd = 0, .events = POLLIN };
-	int delay_msecs = delay_secs * 1000;
+	struct termios tc, save;
+	int delay_msecs, c;
 
-	printf("PerfTop refresh period: %d seconds\n", delay_secs);
+	tcgetattr(0, &save);
+	tc = save;
+	tc.c_lflag &= ~(ICANON | ECHO);
+	tc.c_cc[VMIN] = 0;
+	tc.c_cc[VTIME] = 0;
+
+repeat:
+	delay_msecs = delay_secs * 1000;
+	tcsetattr(0, TCSANOW, &tc);
+	/* trash return*/
+	getc(stdin);
 
 	do {
 		print_sym_table();
 	} while (!poll(&stdin_poll, 1, delay_msecs) == 1);
 
-	printf("key pressed - exiting.\n");
-	exit(0);
+	c = getc(stdin);
+	tcsetattr(0, TCSAFLUSH, &save);
+
+	handle_keypress(c);
+	goto repeat;
 
 	return NULL;
 }
 
+/* Tag samples to be skipped. */
+static const char *skip_symbols[] = {
+	"default_idle",
+	"cpu_idle",
+	"enter_idle",
+	"exit_idle",
+	"mwait_idle",
+	"mwait_idle_with_hints",
+	"ppc64_runlatch_off",
+	"pseries_dedicated_idle_sleep",
+	NULL
+};
+
 static int symbol_filter(struct dso *self, struct symbol *sym)
 {
-	static int filter_match;
 	struct sym_entry *syme;
 	const char *name = sym->name;
+	int i;
+
+	/*
+	 * ppc64 uses function descriptors and appends a '.' to the
+	 * start of every instruction address. Remove it.
+	 */
+	if (name[0] == '.')
+		name++;
 
 	if (!strcmp(name, "_text") ||
 	    !strcmp(name, "_etext") ||
@@ -302,37 +798,17 @@ static int symbol_filter(struct dso *self, struct symbol *sym)
 		return 1;
 
 	syme = dso__sym_priv(self, sym);
-	/* Tag samples to be skipped. */
-	if (!strcmp("default_idle", name) ||
-	    !strcmp("cpu_idle", name) ||
-	    !strcmp("enter_idle", name) ||
-	    !strcmp("exit_idle", name) ||
-	    !strcmp("mwait_idle", name))
-		syme->skip = 1;
-
-	if (filter_match == 1) {
-		filter_end = sym->start;
-		filter_match = -1;
-		if (filter_end - filter_start > 10000) {
-			fprintf(stderr,
-				"hm, too large filter symbol <%s> - skipping.\n",
-				sym_filter);
-			fprintf(stderr, "symbol filter start: %016lx\n",
-				filter_start);
-			fprintf(stderr, "                end: %016lx\n",
-				filter_end);
-			filter_end = filter_start = 0;
-			sym_filter = NULL;
-			sleep(1);
+	pthread_mutex_init(&syme->source_lock, NULL);
+	if (!sym_filter_entry && sym_filter && !strcmp(name, sym_filter))
+		sym_filter_entry = syme;
+
+	for (i = 0; skip_symbols[i]; i++) {
+		if (!strcmp(skip_symbols[i], name)) {
+			syme->skip = 1;
+			break;
 		}
 	}
 
-	if (filter_match == 0 && sym_filter && !strcmp(name, sym_filter)) {
-		filter_match = 1;
-		filter_start = sym->start;
-	}
-
-
 	return 0;
 }
 
@@ -340,12 +816,13 @@ static int parse_symbols(void)
 {
 	struct rb_node *node;
 	struct symbol  *sym;
+	int modules = vmlinux ? 1 : 0;
 
 	kernel_dso = dso__new("[kernel]", sizeof(struct sym_entry));
 	if (kernel_dso == NULL)
 		return -1;
 
-	if (dso__load_kernel(kernel_dso, NULL, symbol_filter, 1) != 0)
+	if (dso__load_kernel(kernel_dso, vmlinux, symbol_filter, verbose, modules) <= 0)
 		goto out_delete_dso;
 
 	node = rb_first(&kernel_dso->syms);
@@ -367,8 +844,6 @@ out_delete_dso:
 	return -1;
 }
 
-#define TRACE_COUNT     3
-
 /*
  * Binary search in the histogram table and record the hit:
  */
@@ -381,6 +856,7 @@ static void record_ip(u64 ip, int counter)
 
 		if (!syme->skip) {
 			syme->count[counter]++;
+			record_precise_ip(syme, counter, ip);
 			pthread_mutex_lock(&active_symbols_lock);
 			if (list_empty(&syme->node) || !syme->node.next)
 				__list_insert_active_sym(syme);
@@ -392,11 +868,11 @@ static void record_ip(u64 ip, int counter)
 	samples--;
 }
 
-static void process_event(u64 ip, int counter)
+static void process_event(u64 ip, int counter, int user)
 {
 	samples++;
 
-	if (ip < min_ip || ip > max_ip) {
+	if (user) {
 		userspace_samples++;
 		return;
 	}
@@ -407,7 +883,7 @@ static void process_event(u64 ip, int counter)
 struct mmap_data {
 	int			counter;
 	void			*base;
-	unsigned int		mask;
+	int			mask;
 	unsigned int		prev;
 };
 
@@ -509,9 +985,10 @@ static void mmap_read_counter(struct mmap_data *md)
 
 		old += size;
 
-		if (event->header.misc & PERF_EVENT_MISC_OVERFLOW) {
-			if (event->header.type & PERF_SAMPLE_IP)
-				process_event(event->ip.ip, md->counter);
+		if (event->header.type == PERF_EVENT_SAMPLE) {
+			int user =
+	(event->header.misc & PERF_EVENT_MISC_CPUMODE_MASK) == PERF_EVENT_MISC_USER;
+			process_event(event->ip.ip, md->counter, user);
 		}
 	}
 
@@ -537,7 +1014,7 @@ int group_fd;
 static void start_counter(int i, int counter)
 {
 	struct perf_counter_attr *attr;
-	unsigned int cpu;
+	int cpu;
 
 	cpu = profile_cpu;
 	if (target_pid == -1 && profile_cpu == -1)
@@ -547,6 +1024,7 @@ static void start_counter(int i, int counter)
 
 	attr->sample_type	= PERF_SAMPLE_IP | PERF_SAMPLE_TID;
 	attr->freq		= freq;
+	attr->inherit		= (cpu < 0) && inherit;
 
 try_again:
 	fd[i][counter] = sys_perf_counter_open(attr, target_pid, cpu, group_fd, 0);
@@ -660,6 +1138,7 @@ static const struct option options[] = {
 			    "system-wide collection from all CPUs"),
 	OPT_INTEGER('C', "CPU", &profile_cpu,
 		    "CPU to profile on"),
+	OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
 	OPT_INTEGER('m', "mmap-pages", &mmap_pages,
 		    "number of mmap data pages"),
 	OPT_INTEGER('r', "realtime", &realtime_prio,
@@ -672,9 +1151,11 @@ static const struct option options[] = {
 		    "only display functions with more events than this"),
 	OPT_BOOLEAN('g', "group", &group,
 			    "put the counters into a counter group"),
-	OPT_STRING('s', "sym-filter", &sym_filter, "pattern",
-		    "only display symbols matchig this pattern"),
-	OPT_BOOLEAN('z', "zero", &group,
+	OPT_BOOLEAN('i', "inherit", &inherit,
+		    "child tasks inherit counters"),
+	OPT_STRING('s', "sym-annotate", &sym_filter, "symbol name",
+		    "symbol to annotate - requires -k option"),
+	OPT_BOOLEAN('z', "zero", &zero,
 		    "zero history across updates"),
 	OPT_INTEGER('F', "freq", &freq,
 		    "profile at this frequency"),
@@ -685,10 +1166,12 @@ static const struct option options[] = {
 	OPT_END()
 };
 
-int cmd_top(int argc, const char **argv, const char *prefix)
+int cmd_top(int argc, const char **argv, const char *prefix __used)
 {
 	int counter;
 
+	symbol__init();
+
 	page_size = sysconf(_SC_PAGE_SIZE);
 
 	argc = parse_options(argc, argv, options, top_usage, 0);
@@ -714,6 +1197,7 @@ int cmd_top(int argc, const char **argv, const char *prefix)
 		delay_secs = 1;
 
 	parse_symbols();
+	parse_source(sym_filter_entry);
 
 	/*
 	 * Fill in the ones not specifically initialized via -c:
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index 4eb72593370..31982ad064b 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -12,6 +12,8 @@
 #include "util/cache.h"
 #include "util/quote.h"
 #include "util/run-command.h"
+#include "util/parse-events.h"
+#include "util/string.h"
 
 const char perf_usage_string[] =
 	"perf [--version] [--help] COMMAND [ARGS]";
@@ -25,6 +27,8 @@ struct pager_config {
 	int val;
 };
 
+static char debugfs_mntpt[MAXPATHLEN];
+
 static int pager_command_config(const char *var, const char *value, void *data)
 {
 	struct pager_config *c = data;
@@ -56,6 +60,15 @@ static void commit_pager_choice(void) {
 	}
 }
 
+static void set_debugfs_path(void)
+{
+	char *path;
+
+	path = getenv(PERF_DEBUGFS_ENVIRONMENT);
+	snprintf(debugfs_path, MAXPATHLEN, "%s/%s", path ?: debugfs_mntpt,
+		 "tracing/events");
+}
+
 static int handle_options(const char*** argv, int* argc, int* envchanged)
 {
 	int handled = 0;
@@ -122,6 +135,22 @@ static int handle_options(const char*** argv, int* argc, int* envchanged)
 			setenv(PERF_WORK_TREE_ENVIRONMENT, cmd + 12, 1);
 			if (envchanged)
 				*envchanged = 1;
+		} else if (!strcmp(cmd, "--debugfs-dir")) {
+			if (*argc < 2) {
+				fprintf(stderr, "No directory given for --debugfs-dir.\n");
+				usage(perf_usage_string);
+			}
+			strncpy(debugfs_mntpt, (*argv)[1], MAXPATHLEN);
+			debugfs_mntpt[MAXPATHLEN - 1] = '\0';
+			if (envchanged)
+				*envchanged = 1;
+			(*argv)++;
+			(*argc)--;
+		} else if (!prefixcmp(cmd, "--debugfs-dir=")) {
+			strncpy(debugfs_mntpt, cmd + 14, MAXPATHLEN);
+			debugfs_mntpt[MAXPATHLEN - 1] = '\0';
+			if (envchanged)
+				*envchanged = 1;
 		} else {
 			fprintf(stderr, "Unknown option: %s\n", cmd);
 			usage(perf_usage_string);
@@ -228,9 +257,7 @@ static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
 	if (use_pager == -1 && p->option & USE_PAGER)
 		use_pager = 1;
 	commit_pager_choice();
-
-	if (p->option & NEED_WORK_TREE)
-		/* setup_work_tree() */;
+	set_debugfs_path();
 
 	status = p->fn(argc, argv, prefix);
 	if (status)
@@ -266,7 +293,7 @@ static void handle_internal_command(int argc, const char **argv)
 		{ "annotate", cmd_annotate, 0 },
 		{ "version", cmd_version, 0 },
 	};
-	int i;
+	unsigned int i;
 	static const char ext[] = STRIP_EXTENSION;
 
 	if (sizeof(ext) > 1) {
@@ -349,6 +376,49 @@ static int run_argv(int *argcp, const char ***argv)
 	return done_alias;
 }
 
+/* mini /proc/mounts parser: searching for "^blah /mount/point debugfs" */
+static void get_debugfs_mntpt(void)
+{
+	FILE *file;
+	char fs_type[100];
+	char debugfs[MAXPATHLEN];
+
+	/*
+	 * try the standard location
+	 */
+	if (valid_debugfs_mount("/sys/kernel/debug/") == 0) {
+		strcpy(debugfs_mntpt, "/sys/kernel/debug/");
+		return;
+	}
+
+	/*
+	 * try the sane location
+	 */
+	if (valid_debugfs_mount("/debug/") == 0) {
+		strcpy(debugfs_mntpt, "/debug/");
+		return;
+	}
+
+	/*
+	 * give up and parse /proc/mounts
+	 */
+	file = fopen("/proc/mounts", "r");
+	if (file == NULL)
+		return;
+
+	while (fscanf(file, "%*s %"
+		      STR(MAXPATHLEN)
+		      "s %99s %*s %*d %*d\n",
+		      debugfs, fs_type) == 2) {
+		if (strcmp(fs_type, "debugfs") == 0)
+			break;
+	}
+	fclose(file);
+	if (strcmp(fs_type, "debugfs") == 0) {
+		strncpy(debugfs_mntpt, debugfs, MAXPATHLEN);
+		debugfs_mntpt[MAXPATHLEN - 1] = '\0';
+	}
+}
 
 int main(int argc, const char **argv)
 {
@@ -357,7 +427,8 @@ int main(int argc, const char **argv)
 	cmd = perf_extract_argv0_path(argv[0]);
 	if (!cmd)
 		cmd = "perf-help";
-
+	/* get debugfs mount point from /proc/mounts */
+	get_debugfs_mntpt();
 	/*
 	 * "perf-xxxx" is the same as "perf xxxx", but we obviously:
 	 *
@@ -380,6 +451,7 @@ int main(int argc, const char **argv)
 	argc--;
 	handle_options(&argv, &argc, NULL);
 	commit_pager_choice();
+	set_debugfs_path();
 	if (argc > 0) {
 		if (!prefixcmp(argv[0], "--"))
 			argv[0] += 2;
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index ceb68aa51f7..e5148e2b613 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -1,7 +1,13 @@
 #ifndef _PERF_PERF_H
 #define _PERF_PERF_H
 
-#if defined(__x86_64__) || defined(__i386__)
+#if defined(__i386__)
+#include "../../arch/x86/include/asm/unistd.h"
+#define rmb()		asm volatile("lock; addl $0,0(%%esp)" ::: "memory")
+#define cpu_relax()	asm volatile("rep; nop" ::: "memory");
+#endif
+
+#if defined(__x86_64__)
 #include "../../arch/x86/include/asm/unistd.h"
 #define rmb()		asm volatile("lfence" ::: "memory")
 #define cpu_relax()	asm volatile("rep; nop" ::: "memory");
@@ -19,13 +25,29 @@
 #define cpu_relax()	asm volatile("" ::: "memory");
 #endif
 
+#ifdef __sh__
+#include "../../arch/sh/include/asm/unistd.h"
+#if defined(__SH4A__) || defined(__SH5__)
+# define rmb()		asm volatile("synco" ::: "memory")
+#else
+# define rmb()		asm volatile("" ::: "memory")
+#endif
+#define cpu_relax()	asm volatile("" ::: "memory")
+#endif
+
+#ifdef __hppa__
+#include "../../arch/parisc/include/asm/unistd.h"
+#define rmb()		asm volatile("" ::: "memory")
+#define cpu_relax()	asm volatile("" ::: "memory");
+#endif
+
 #include <time.h>
 #include <unistd.h>
 #include <sys/types.h>
 #include <sys/syscall.h>
 
 #include "../../include/linux/perf_counter.h"
-#include "types.h"
+#include "util/types.h"
 
 /*
  * prctl(PR_TASK_PERF_COUNTERS_DISABLE) will (cheaply) disable all
@@ -52,6 +74,8 @@ static inline unsigned long long rdclock(void)
 #define __user
 #define asmlinkage
 
+#define __used		__attribute__((__unused__))
+
 #define unlikely(x)	__builtin_expect(!!(x), 0)
 #define min(x, y) ({				\
 	typeof(x) _min1 = (x);			\
@@ -72,10 +96,9 @@ sys_perf_counter_open(struct perf_counter_attr *attr,
 #define MAX_COUNTERS			256
 #define MAX_NR_CPUS			256
 
-struct perf_file_header {
-	u64	version;
-	u64	sample_type;
-	u64	data_size;
+struct ip_callchain {
+	u64 nr;
+	u64 ips[0];
 };
 
 #endif
diff --git a/tools/perf/util/alias.c b/tools/perf/util/alias.c
index 9b3dd2b428d..b8144e80bb1 100644
--- a/tools/perf/util/alias.c
+++ b/tools/perf/util/alias.c
@@ -3,7 +3,7 @@
 static const char *alias_key;
 static char *alias_val;
 
-static int alias_lookup_cb(const char *k, const char *v, void *cb)
+static int alias_lookup_cb(const char *k, const char *v, void *cb __used)
 {
 	if (!prefixcmp(k, "alias.") && !strcmp(k+6, alias_key)) {
 		if (!v)
diff --git a/tools/perf/util/cache.h b/tools/perf/util/cache.h
index 393d6146d13..4b50c412b9c 100644
--- a/tools/perf/util/cache.h
+++ b/tools/perf/util/cache.h
@@ -3,6 +3,7 @@
 
 #include "util.h"
 #include "strbuf.h"
+#include "../perf.h"
 
 #define PERF_DIR_ENVIRONMENT "PERF_DIR"
 #define PERF_WORK_TREE_ENVIRONMENT "PERF_WORK_TREE"
@@ -17,6 +18,7 @@
 #define PERFATTRIBUTES_FILE ".perfattributes"
 #define INFOATTRIBUTES_FILE "info/attributes"
 #define ATTRIBUTE_MACRO_PREFIX "[attr]"
+#define PERF_DEBUGFS_ENVIRONMENT "PERF_DEBUGFS_DIR"
 
 typedef int (*config_fn_t)(const char *, const char *, void *);
 extern int perf_default_config(const char *, const char *, void *);
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
new file mode 100644
index 00000000000..01147341164
--- /dev/null
+++ b/tools/perf/util/callchain.c
@@ -0,0 +1,343 @@
+/*
+ * Copyright (C) 2009, Frederic Weisbecker <fweisbec@gmail.com>
+ *
+ * Handle the callchains from the stream in an ad-hoc radix tree and then
+ * sort them in an rbtree.
+ *
+ * Using a radix for code path provides a fast retrieval and factorizes
+ * memory use. Also that lets us use the paths in a hierarchical graph view.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdbool.h>
+#include <errno.h>
+#include <math.h>
+
+#include "callchain.h"
+
+#define chain_for_each_child(child, parent)	\
+	list_for_each_entry(child, &parent->children, brothers)
+
+static void
+rb_insert_callchain(struct rb_root *root, struct callchain_node *chain,
+		    enum chain_mode mode)
+{
+	struct rb_node **p = &root->rb_node;
+	struct rb_node *parent = NULL;
+	struct callchain_node *rnode;
+	u64 chain_cumul = cumul_hits(chain);
+
+	while (*p) {
+		u64 rnode_cumul;
+
+		parent = *p;
+		rnode = rb_entry(parent, struct callchain_node, rb_node);
+		rnode_cumul = cumul_hits(rnode);
+
+		switch (mode) {
+		case CHAIN_FLAT:
+			if (rnode->hit < chain->hit)
+				p = &(*p)->rb_left;
+			else
+				p = &(*p)->rb_right;
+			break;
+		case CHAIN_GRAPH_ABS: /* Falldown */
+		case CHAIN_GRAPH_REL:
+			if (rnode_cumul < chain_cumul)
+				p = &(*p)->rb_left;
+			else
+				p = &(*p)->rb_right;
+			break;
+		default:
+			break;
+		}
+	}
+
+	rb_link_node(&chain->rb_node, parent, p);
+	rb_insert_color(&chain->rb_node, root);
+}
+
+static void
+__sort_chain_flat(struct rb_root *rb_root, struct callchain_node *node,
+		  u64 min_hit)
+{
+	struct callchain_node *child;
+
+	chain_for_each_child(child, node)
+		__sort_chain_flat(rb_root, child, min_hit);
+
+	if (node->hit && node->hit >= min_hit)
+		rb_insert_callchain(rb_root, node, CHAIN_FLAT);
+}
+
+/*
+ * Once we get every callchains from the stream, we can now
+ * sort them by hit
+ */
+static void
+sort_chain_flat(struct rb_root *rb_root, struct callchain_node *node,
+		u64 min_hit, struct callchain_param *param __used)
+{
+	__sort_chain_flat(rb_root, node, min_hit);
+}
+
+static void __sort_chain_graph_abs(struct callchain_node *node,
+				   u64 min_hit)
+{
+	struct callchain_node *child;
+
+	node->rb_root = RB_ROOT;
+
+	chain_for_each_child(child, node) {
+		__sort_chain_graph_abs(child, min_hit);
+		if (cumul_hits(child) >= min_hit)
+			rb_insert_callchain(&node->rb_root, child,
+					    CHAIN_GRAPH_ABS);
+	}
+}
+
+static void
+sort_chain_graph_abs(struct rb_root *rb_root, struct callchain_node *chain_root,
+		     u64 min_hit, struct callchain_param *param __used)
+{
+	__sort_chain_graph_abs(chain_root, min_hit);
+	rb_root->rb_node = chain_root->rb_root.rb_node;
+}
+
+static void __sort_chain_graph_rel(struct callchain_node *node,
+				   double min_percent)
+{
+	struct callchain_node *child;
+	u64 min_hit;
+
+	node->rb_root = RB_ROOT;
+	min_hit = ceil(node->children_hit * min_percent);
+
+	chain_for_each_child(child, node) {
+		__sort_chain_graph_rel(child, min_percent);
+		if (cumul_hits(child) >= min_hit)
+			rb_insert_callchain(&node->rb_root, child,
+					    CHAIN_GRAPH_REL);
+	}
+}
+
+static void
+sort_chain_graph_rel(struct rb_root *rb_root, struct callchain_node *chain_root,
+		     u64 min_hit __used, struct callchain_param *param)
+{
+	__sort_chain_graph_rel(chain_root, param->min_percent / 100.0);
+	rb_root->rb_node = chain_root->rb_root.rb_node;
+}
+
+int register_callchain_param(struct callchain_param *param)
+{
+	switch (param->mode) {
+	case CHAIN_GRAPH_ABS:
+		param->sort = sort_chain_graph_abs;
+		break;
+	case CHAIN_GRAPH_REL:
+		param->sort = sort_chain_graph_rel;
+		break;
+	case CHAIN_FLAT:
+		param->sort = sort_chain_flat;
+		break;
+	default:
+		return -1;
+	}
+	return 0;
+}
+
+/*
+ * Create a child for a parent. If inherit_children, then the new child
+ * will become the new parent of it's parent children
+ */
+static struct callchain_node *
+create_child(struct callchain_node *parent, bool inherit_children)
+{
+	struct callchain_node *new;
+
+	new = malloc(sizeof(*new));
+	if (!new) {
+		perror("not enough memory to create child for code path tree");
+		return NULL;
+	}
+	new->parent = parent;
+	INIT_LIST_HEAD(&new->children);
+	INIT_LIST_HEAD(&new->val);
+
+	if (inherit_children) {
+		struct callchain_node *next;
+
+		list_splice(&parent->children, &new->children);
+		INIT_LIST_HEAD(&parent->children);
+
+		chain_for_each_child(next, new)
+			next->parent = new;
+	}
+	list_add_tail(&new->brothers, &parent->children);
+
+	return new;
+}
+
+/*
+ * Fill the node with callchain values
+ */
+static void
+fill_node(struct callchain_node *node, struct ip_callchain *chain,
+	  int start, struct symbol **syms)
+{
+	unsigned int i;
+
+	for (i = start; i < chain->nr; i++) {
+		struct callchain_list *call;
+
+		call = malloc(sizeof(*call));
+		if (!call) {
+			perror("not enough memory for the code path tree");
+			return;
+		}
+		call->ip = chain->ips[i];
+		call->sym = syms[i];
+		list_add_tail(&call->list, &node->val);
+	}
+	node->val_nr = chain->nr - start;
+	if (!node->val_nr)
+		printf("Warning: empty node in callchain tree\n");
+}
+
+static void
+add_child(struct callchain_node *parent, struct ip_callchain *chain,
+	  int start, struct symbol **syms)
+{
+	struct callchain_node *new;
+
+	new = create_child(parent, false);
+	fill_node(new, chain, start, syms);
+
+	new->children_hit = 0;
+	new->hit = 1;
+}
+
+/*
+ * Split the parent in two parts (a new child is created) and
+ * give a part of its callchain to the created child.
+ * Then create another child to host the given callchain of new branch
+ */
+static void
+split_add_child(struct callchain_node *parent, struct ip_callchain *chain,
+		struct callchain_list *to_split, int idx_parents, int idx_local,
+		struct symbol **syms)
+{
+	struct callchain_node *new;
+	struct list_head *old_tail;
+	unsigned int idx_total = idx_parents + idx_local;
+
+	/* split */
+	new = create_child(parent, true);
+
+	/* split the callchain and move a part to the new child */
+	old_tail = parent->val.prev;
+	list_del_range(&to_split->list, old_tail);
+	new->val.next = &to_split->list;
+	new->val.prev = old_tail;
+	to_split->list.prev = &new->val;
+	old_tail->next = &new->val;
+
+	/* split the hits */
+	new->hit = parent->hit;
+	new->children_hit = parent->children_hit;
+	parent->children_hit = cumul_hits(new);
+	new->val_nr = parent->val_nr - idx_local;
+	parent->val_nr = idx_local;
+
+	/* create a new child for the new branch if any */
+	if (idx_total < chain->nr) {
+		parent->hit = 0;
+		add_child(parent, chain, idx_total, syms);
+		parent->children_hit++;
+	} else {
+		parent->hit = 1;
+	}
+}
+
+static int
+__append_chain(struct callchain_node *root, struct ip_callchain *chain,
+	       unsigned int start, struct symbol **syms);
+
+static void
+__append_chain_children(struct callchain_node *root, struct ip_callchain *chain,
+			struct symbol **syms, unsigned int start)
+{
+	struct callchain_node *rnode;
+
+	/* lookup in childrens */
+	chain_for_each_child(rnode, root) {
+		unsigned int ret = __append_chain(rnode, chain, start, syms);
+
+		if (!ret)
+			goto inc_children_hit;
+	}
+	/* nothing in children, add to the current node */
+	add_child(root, chain, start, syms);
+
+inc_children_hit:
+	root->children_hit++;
+}
+
+static int
+__append_chain(struct callchain_node *root, struct ip_callchain *chain,
+	       unsigned int start, struct symbol **syms)
+{
+	struct callchain_list *cnode;
+	unsigned int i = start;
+	bool found = false;
+
+	/*
+	 * Lookup in the current node
+	 * If we have a symbol, then compare the start to match
+	 * anywhere inside a function.
+	 */
+	list_for_each_entry(cnode, &root->val, list) {
+		if (i == chain->nr)
+			break;
+		if (cnode->sym && syms[i]) {
+			if (cnode->sym->start != syms[i]->start)
+				break;
+		} else if (cnode->ip != chain->ips[i])
+			break;
+		if (!found)
+			found = true;
+		i++;
+	}
+
+	/* matches not, relay on the parent */
+	if (!found)
+		return -1;
+
+	/* we match only a part of the node. Split it and add the new chain */
+	if (i - start < root->val_nr) {
+		split_add_child(root, chain, cnode, start, i - start, syms);
+		return 0;
+	}
+
+	/* we match 100% of the path, increment the hit */
+	if (i - start == root->val_nr && i == chain->nr) {
+		root->hit++;
+		return 0;
+	}
+
+	/* We match the node and still have a part remaining */
+	__append_chain_children(root, chain, syms, i);
+
+	return 0;
+}
+
+void append_chain(struct callchain_node *root, struct ip_callchain *chain,
+		  struct symbol **syms)
+{
+	if (!chain->nr)
+		return;
+	__append_chain_children(root, chain, syms, 0);
+}
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
new file mode 100644
index 00000000000..a926ae4f5a1
--- /dev/null
+++ b/tools/perf/util/callchain.h
@@ -0,0 +1,60 @@
+#ifndef __PERF_CALLCHAIN_H
+#define __PERF_CALLCHAIN_H
+
+#include "../perf.h"
+#include <linux/list.h>
+#include <linux/rbtree.h>
+#include "symbol.h"
+
+enum chain_mode {
+	CHAIN_NONE,
+	CHAIN_FLAT,
+	CHAIN_GRAPH_ABS,
+	CHAIN_GRAPH_REL
+};
+
+struct callchain_node {
+	struct callchain_node	*parent;
+	struct list_head	brothers;
+	struct list_head	children;
+	struct list_head	val;
+	struct rb_node		rb_node; /* to sort nodes in an rbtree */
+	struct rb_root		rb_root; /* sorted tree of children */
+	unsigned int		val_nr;
+	u64			hit;
+	u64			children_hit;
+};
+
+struct callchain_param;
+
+typedef void (*sort_chain_func_t)(struct rb_root *, struct callchain_node *,
+				 u64, struct callchain_param *);
+
+struct callchain_param {
+	enum chain_mode 	mode;
+	double			min_percent;
+	sort_chain_func_t	sort;
+};
+
+struct callchain_list {
+	u64			ip;
+	struct symbol		*sym;
+	struct list_head	list;
+};
+
+static inline void callchain_init(struct callchain_node *node)
+{
+	INIT_LIST_HEAD(&node->brothers);
+	INIT_LIST_HEAD(&node->children);
+	INIT_LIST_HEAD(&node->val);
+}
+
+static inline u64 cumul_hits(struct callchain_node *node)
+{
+	return node->hit + node->children_hit;
+}
+
+int register_callchain_param(struct callchain_param *param);
+void append_chain(struct callchain_node *root, struct ip_callchain *chain,
+		  struct symbol **syms);
+#endif
diff --git a/tools/perf/util/color.c b/tools/perf/util/color.c
index 9a8c20ccc53..90a044d1fe7 100644
--- a/tools/perf/util/color.c
+++ b/tools/perf/util/color.c
@@ -11,7 +11,8 @@ static int parse_color(const char *name, int len)
 	};
 	char *end;
 	int i;
-	for (i = 0; i < ARRAY_SIZE(color_names); i++) {
+
+	for (i = 0; i < (int)ARRAY_SIZE(color_names); i++) {
 		const char *str = color_names[i];
 		if (!strncasecmp(name, str, len) && !str[len])
 			return i - 1;
@@ -28,7 +29,8 @@ static int parse_attr(const char *name, int len)
 	static const char * const attr_names[] = {
 		"bold", "dim", "ul", "blink", "reverse"
 	};
-	int i;
+	unsigned int i;
+
 	for (i = 0; i < ARRAY_SIZE(attr_names); i++) {
 		const char *str = attr_names[i];
 		if (!strncasecmp(name, str, len) && !str[len])
@@ -222,10 +224,12 @@ int color_fwrite_lines(FILE *fp, const char *color,
 {
 	if (!*color)
 		return fwrite(buf, count, 1, fp) != 1;
+
 	while (count) {
 		char *p = memchr(buf, '\n', count);
+
 		if (p != buf && (fputs(color, fp) < 0 ||
-				fwrite(buf, p ? p - buf : count, 1, fp) != 1 ||
+				fwrite(buf, p ? (size_t)(p - buf) : count, 1, fp) != 1 ||
 				fputs(PERF_COLOR_RESET, fp) < 0))
 			return -1;
 		if (!p)
@@ -238,4 +242,31 @@ int color_fwrite_lines(FILE *fp, const char *color,
 	return 0;
 }
 
+char *get_percent_color(double percent)
+{
+	char *color = PERF_COLOR_NORMAL;
 
+	/*
+	 * We color high-overhead entries in red, mid-overhead
+	 * entries in green - and keep the low overhead places
+	 * normal:
+	 */
+	if (percent >= MIN_RED)
+		color = PERF_COLOR_RED;
+	else {
+		if (percent > MIN_GREEN)
+			color = PERF_COLOR_GREEN;
+	}
+	return color;
+}
+
+int percent_color_fprintf(FILE *fp, const char *fmt, double percent)
+{
+	int r;
+	char *color;
+
+	color = get_percent_color(percent);
+	r = color_fprintf(fp, color, fmt, percent);
+
+	return r;
+}
diff --git a/tools/perf/util/color.h b/tools/perf/util/color.h
index 5abfd379582..706cec50bd2 100644
--- a/tools/perf/util/color.h
+++ b/tools/perf/util/color.h
@@ -15,6 +15,9 @@
 #define PERF_COLOR_CYAN		"\033[36m"
 #define PERF_COLOR_BG_RED	"\033[41m"
 
+#define MIN_GREEN	0.5
+#define MIN_RED		5.0
+
 /*
  * This variable stores the value of color.ui
  */
@@ -32,5 +35,7 @@ void color_parse_mem(const char *value, int len, const char *var, char *dst);
 int color_fprintf(FILE *fp, const char *color, const char *fmt, ...);
 int color_fprintf_ln(FILE *fp, const char *color, const char *fmt, ...);
 int color_fwrite_lines(FILE *fp, const char *color, size_t count, const char *buf);
+int percent_color_fprintf(FILE *fp, const char *fmt, double percent);
+char *get_percent_color(double percent);
 
 #endif /* COLOR_H */
diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c
index 3dd13faa6a2..780df541006 100644
--- a/tools/perf/util/config.c
+++ b/tools/perf/util/config.c
@@ -47,10 +47,12 @@ static int get_next_char(void)
 static char *parse_value(void)
 {
 	static char value[1024];
-	int quote = 0, comment = 0, len = 0, space = 0;
+	int quote = 0, comment = 0, space = 0;
+	size_t len = 0;
 
 	for (;;) {
 		int c = get_next_char();
+
 		if (len >= sizeof(value) - 1)
 			return NULL;
 		if (c == '\n') {
@@ -353,13 +355,13 @@ int perf_config_string(const char **dest, const char *var, const char *value)
 	return 0;
 }
 
-static int perf_default_core_config(const char *var, const char *value)
+static int perf_default_core_config(const char *var __used, const char *value __used)
 {
 	/* Add other config variables here and to Documentation/config.txt. */
 	return 0;
 }
 
-int perf_default_config(const char *var, const char *value, void *dummy)
+int perf_default_config(const char *var, const char *value, void *dummy __used)
 {
 	if (!prefixcmp(var, "core."))
 		return perf_default_core_config(var, value);
@@ -471,10 +473,10 @@ static int matches(const char* key, const char* value)
 		  !regexec(store.value_regex, value, 0, NULL, 0)));
 }
 
-static int store_aux(const char* key, const char* value, void *cb)
+static int store_aux(const char* key, const char* value, void *cb __used)
 {
+	int section_len;
 	const char *ep;
-	size_t section_len;
 
 	switch (store.state) {
 	case KEY_SEEN:
@@ -551,7 +553,7 @@ static int store_write_section(int fd, const char* key)
 		strbuf_addf(&sb, "[%.*s]\n", store.baselen, key);
 	}
 
-	success = write_in_full(fd, sb.buf, sb.len) == sb.len;
+	success = (write_in_full(fd, sb.buf, sb.len) == (ssize_t)sb.len);
 	strbuf_release(&sb);
 
 	return success;
@@ -599,7 +601,7 @@ static int store_write_pair(int fd, const char* key, const char* value)
 		}
 	strbuf_addf(&sb, "%s\n", quote);
 
-	success = write_in_full(fd, sb.buf, sb.len) == sb.len;
+	success = (write_in_full(fd, sb.buf, sb.len) == (ssize_t)sb.len);
 	strbuf_release(&sb);
 
 	return success;
@@ -741,7 +743,7 @@ int perf_config_set_multivar(const char* key, const char* value,
 	} else {
 		struct stat st;
 		char* contents;
-		size_t contents_sz, copy_begin, copy_end;
+		ssize_t contents_sz, copy_begin, copy_end;
 		int i, new_line = 0;
 
 		if (value_regex == NULL)
diff --git a/tools/perf/util/exec_cmd.c b/tools/perf/util/exec_cmd.c
index d3929226315..34a35286738 100644
--- a/tools/perf/util/exec_cmd.c
+++ b/tools/perf/util/exec_cmd.c
@@ -1,6 +1,9 @@
 #include "cache.h"
 #include "exec_cmd.h"
 #include "quote.h"
+
+#include <string.h>
+
 #define MAX_ARGS	32
 
 extern char **environ;
@@ -51,7 +54,7 @@ const char *perf_extract_argv0_path(const char *argv0)
 		slash--;
 
 	if (slash >= argv0) {
-		argv0_path = strndup(argv0, slash - argv0);
+		argv0_path = xstrndup(argv0, slash - argv0);
 		return slash + 1;
 	}
 
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
new file mode 100644
index 00000000000..b92a457ca32
--- /dev/null
+++ b/tools/perf/util/header.c
@@ -0,0 +1,245 @@
+#include <sys/types.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "util.h"
+#include "header.h"
+
+/*
+ *
+ */
+
+struct perf_header_attr *perf_header_attr__new(struct perf_counter_attr *attr)
+{
+	struct perf_header_attr *self = malloc(sizeof(*self));
+
+	if (!self)
+		die("nomem");
+
+	self->attr = *attr;
+	self->ids = 0;
+	self->size = 1;
+	self->id = malloc(sizeof(u64));
+
+	if (!self->id)
+		die("nomem");
+
+	return self;
+}
+
+void perf_header_attr__add_id(struct perf_header_attr *self, u64 id)
+{
+	int pos = self->ids;
+
+	self->ids++;
+	if (self->ids > self->size) {
+		self->size *= 2;
+		self->id = realloc(self->id, self->size * sizeof(u64));
+		if (!self->id)
+			die("nomem");
+	}
+	self->id[pos] = id;
+}
+
+/*
+ *
+ */
+
+struct perf_header *perf_header__new(void)
+{
+	struct perf_header *self = malloc(sizeof(*self));
+
+	if (!self)
+		die("nomem");
+
+	self->frozen = 0;
+
+	self->attrs = 0;
+	self->size = 1;
+	self->attr = malloc(sizeof(void *));
+
+	if (!self->attr)
+		die("nomem");
+
+	self->data_offset = 0;
+	self->data_size = 0;
+
+	return self;
+}
+
+void perf_header__add_attr(struct perf_header *self,
+			   struct perf_header_attr *attr)
+{
+	int pos = self->attrs;
+
+	if (self->frozen)
+		die("frozen");
+
+	self->attrs++;
+	if (self->attrs > self->size) {
+		self->size *= 2;
+		self->attr = realloc(self->attr, self->size * sizeof(void *));
+		if (!self->attr)
+			die("nomem");
+	}
+	self->attr[pos] = attr;
+}
+
+static const char *__perf_magic = "PERFFILE";
+
+#define PERF_MAGIC	(*(u64 *)__perf_magic)
+
+struct perf_file_section {
+	u64 offset;
+	u64 size;
+};
+
+struct perf_file_attr {
+	struct perf_counter_attr	attr;
+	struct perf_file_section	ids;
+};
+
+struct perf_file_header {
+	u64				magic;
+	u64				size;
+	u64				attr_size;
+	struct perf_file_section	attrs;
+	struct perf_file_section	data;
+};
+
+static void do_write(int fd, void *buf, size_t size)
+{
+	while (size) {
+		int ret = write(fd, buf, size);
+
+		if (ret < 0)
+			die("failed to write");
+
+		size -= ret;
+		buf += ret;
+	}
+}
+
+void perf_header__write(struct perf_header *self, int fd)
+{
+	struct perf_file_header f_header;
+	struct perf_file_attr   f_attr;
+	struct perf_header_attr	*attr;
+	int i;
+
+	lseek(fd, sizeof(f_header), SEEK_SET);
+
+
+	for (i = 0; i < self->attrs; i++) {
+		attr = self->attr[i];
+
+		attr->id_offset = lseek(fd, 0, SEEK_CUR);
+		do_write(fd, attr->id, attr->ids * sizeof(u64));
+	}
+
+
+	self->attr_offset = lseek(fd, 0, SEEK_CUR);
+
+	for (i = 0; i < self->attrs; i++) {
+		attr = self->attr[i];
+
+		f_attr = (struct perf_file_attr){
+			.attr = attr->attr,
+			.ids  = {
+				.offset = attr->id_offset,
+				.size   = attr->ids * sizeof(u64),
+			}
+		};
+		do_write(fd, &f_attr, sizeof(f_attr));
+	}
+
+
+	self->data_offset = lseek(fd, 0, SEEK_CUR);
+
+	f_header = (struct perf_file_header){
+		.magic	   = PERF_MAGIC,
+		.size	   = sizeof(f_header),
+		.attr_size = sizeof(f_attr),
+		.attrs = {
+			.offset = self->attr_offset,
+			.size   = self->attrs * sizeof(f_attr),
+		},
+		.data = {
+			.offset = self->data_offset,
+			.size	= self->data_size,
+		},
+	};
+
+	lseek(fd, 0, SEEK_SET);
+	do_write(fd, &f_header, sizeof(f_header));
+	lseek(fd, self->data_offset + self->data_size, SEEK_SET);
+
+	self->frozen = 1;
+}
+
+static void do_read(int fd, void *buf, size_t size)
+{
+	while (size) {
+		int ret = read(fd, buf, size);
+
+		if (ret < 0)
+			die("failed to read");
+		if (ret == 0)
+			die("failed to read: missing data");
+
+		size -= ret;
+		buf += ret;
+	}
+}
+
+struct perf_header *perf_header__read(int fd)
+{
+	struct perf_header	*self = perf_header__new();
+	struct perf_file_header f_header;
+	struct perf_file_attr	f_attr;
+	u64			f_id;
+
+	int nr_attrs, nr_ids, i, j;
+
+	lseek(fd, 0, SEEK_SET);
+	do_read(fd, &f_header, sizeof(f_header));
+
+	if (f_header.magic	!= PERF_MAGIC		||
+	    f_header.size	!= sizeof(f_header)	||
+	    f_header.attr_size	!= sizeof(f_attr))
+		die("incompatible file format");
+
+	nr_attrs = f_header.attrs.size / sizeof(f_attr);
+	lseek(fd, f_header.attrs.offset, SEEK_SET);
+
+	for (i = 0; i < nr_attrs; i++) {
+		struct perf_header_attr *attr;
+		off_t tmp;
+
+		do_read(fd, &f_attr, sizeof(f_attr));
+		tmp = lseek(fd, 0, SEEK_CUR);
+
+		attr = perf_header_attr__new(&f_attr.attr);
+
+		nr_ids = f_attr.ids.size / sizeof(u64);
+		lseek(fd, f_attr.ids.offset, SEEK_SET);
+
+		for (j = 0; j < nr_ids; j++) {
+			do_read(fd, &f_id, sizeof(f_id));
+
+			perf_header_attr__add_id(attr, f_id);
+		}
+		perf_header__add_attr(self, attr);
+		lseek(fd, tmp, SEEK_SET);
+	}
+
+	self->data_offset = f_header.data.offset;
+	self->data_size   = f_header.data.size;
+
+	lseek(fd, self->data_offset + self->data_size, SEEK_SET);
+
+	self->frozen = 1;
+
+	return self;
+}
diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h
new file mode 100644
index 00000000000..bf280449fcf
--- /dev/null
+++ b/tools/perf/util/header.h
@@ -0,0 +1,37 @@
+#ifndef _PERF_HEADER_H
+#define _PERF_HEADER_H
+
+#include "../../../include/linux/perf_counter.h"
+#include <sys/types.h>
+#include "types.h"
+
+struct perf_header_attr {
+	struct perf_counter_attr attr;
+	int ids, size;
+	u64 *id;
+	off_t id_offset;
+};
+
+struct perf_header {
+	int frozen;
+	int attrs, size;
+	struct perf_header_attr **attr;
+	s64 attr_offset;
+	u64 data_offset;
+	u64 data_size;
+};
+
+struct perf_header *perf_header__read(int fd);
+void perf_header__write(struct perf_header *self, int fd);
+
+void perf_header__add_attr(struct perf_header *self,
+			   struct perf_header_attr *attr);
+
+struct perf_header_attr *
+perf_header_attr__new(struct perf_counter_attr *attr);
+void perf_header_attr__add_id(struct perf_header_attr *self, u64 id);
+
+
+struct perf_header *perf_header__new(void);
+
+#endif /* _PERF_HEADER_H */
diff --git a/tools/perf/util/help.c b/tools/perf/util/help.c
index 6653f7dd1d7..fbb00978b2e 100644
--- a/tools/perf/util/help.c
+++ b/tools/perf/util/help.c
@@ -26,7 +26,7 @@ static int term_columns(void)
 	return 80;
 }
 
-void add_cmdname(struct cmdnames *cmds, const char *name, int len)
+void add_cmdname(struct cmdnames *cmds, const char *name, size_t len)
 {
 	struct cmdname *ent = malloc(sizeof(*ent) + len + 1);
 
@@ -40,7 +40,8 @@ void add_cmdname(struct cmdnames *cmds, const char *name, int len)
 
 static void clean_cmdnames(struct cmdnames *cmds)
 {
-	int i;
+	unsigned int i;
+
 	for (i = 0; i < cmds->cnt; ++i)
 		free(cmds->names[i]);
 	free(cmds->names);
@@ -57,7 +58,7 @@ static int cmdname_compare(const void *a_, const void *b_)
 
 static void uniq(struct cmdnames *cmds)
 {
-	int i, j;
+	unsigned int i, j;
 
 	if (!cmds->cnt)
 		return;
@@ -71,7 +72,7 @@ static void uniq(struct cmdnames *cmds)
 
 void exclude_cmds(struct cmdnames *cmds, struct cmdnames *excludes)
 {
-	int ci, cj, ei;
+	size_t ci, cj, ei;
 	int cmp;
 
 	ci = cj = ei = 0;
@@ -106,8 +107,9 @@ static void pretty_print_string_list(struct cmdnames *cmds, int longest)
 		printf("  ");
 
 		for (j = 0; j < cols; j++) {
-			int n = j * rows + i;
-			int size = space;
+			unsigned int n = j * rows + i;
+			unsigned int size = space;
+
 			if (n >= cmds->cnt)
 				break;
 			if (j == cols-1 || n + rows >= cmds->cnt)
@@ -126,21 +128,6 @@ static int is_executable(const char *name)
 	    !S_ISREG(st.st_mode))
 		return 0;
 
-#ifdef __MINGW32__
-	/* cannot trust the executable bit, peek into the file instead */
-	char buf[3] = { 0 };
-	int n;
-	int fd = open(name, O_RDONLY);
-	st.st_mode &= ~S_IXUSR;
-	if (fd >= 0) {
-		n = read(fd, buf, 2);
-		if (n == 2)
-			/* DOS executables start with "MZ" */
-			if (!strcmp(buf, "#!") || !strcmp(buf, "MZ"))
-				st.st_mode |= S_IXUSR;
-		close(fd);
-	}
-#endif
 	return st.st_mode & S_IXUSR;
 }
 
@@ -223,7 +210,7 @@ void load_command_list(const char *prefix,
 void list_commands(const char *title, struct cmdnames *main_cmds,
 		   struct cmdnames *other_cmds)
 {
-	int i, longest = 0;
+	unsigned int i, longest = 0;
 
 	for (i = 0; i < main_cmds->cnt; i++)
 		if (longest < main_cmds->names[i]->len)
@@ -254,7 +241,8 @@ void list_commands(const char *title, struct cmdnames *main_cmds,
 
 int is_in_cmdlist(struct cmdnames *c, const char *s)
 {
-	int i;
+	unsigned int i;
+
 	for (i = 0; i < c->cnt; i++)
 		if (!strcmp(s, c->names[i]->name))
 			return 1;
@@ -286,7 +274,8 @@ static int levenshtein_compare(const void *p1, const void *p2)
 
 static void add_cmd_list(struct cmdnames *cmds, struct cmdnames *old)
 {
-	int i;
+	unsigned int i;
+
 	ALLOC_GROW(cmds->names, cmds->cnt + old->cnt, cmds->alloc);
 
 	for (i = 0; i < old->cnt; i++)
@@ -298,7 +287,7 @@ static void add_cmd_list(struct cmdnames *cmds, struct cmdnames *old)
 
 const char *help_unknown_cmd(const char *cmd)
 {
-	int i, n = 0, best_similarity = 0;
+	unsigned int i, n = 0, best_similarity = 0;
 	struct cmdnames main_cmds, other_cmds;
 
 	memset(&main_cmds, 0, sizeof(main_cmds));
@@ -360,7 +349,7 @@ const char *help_unknown_cmd(const char *cmd)
 	exit(1);
 }
 
-int cmd_version(int argc, const char **argv, const char *prefix)
+int cmd_version(int argc __used, const char **argv __used, const char *prefix __used)
 {
 	printf("perf version %s\n", perf_version_string);
 	return 0;
diff --git a/tools/perf/util/help.h b/tools/perf/util/help.h
index 56bc15406ff..7128783637b 100644
--- a/tools/perf/util/help.h
+++ b/tools/perf/util/help.h
@@ -2,8 +2,8 @@
 #define HELP_H
 
 struct cmdnames {
-	int alloc;
-	int cnt;
+	size_t alloc;
+	size_t cnt;
 	struct cmdname {
 		size_t len; /* also used for similarity index in help.c */
 		char name[FLEX_ARRAY];
@@ -19,7 +19,7 @@ static inline void mput_char(char c, unsigned int num)
 void load_command_list(const char *prefix,
 		struct cmdnames *main_cmds,
 		struct cmdnames *other_cmds);
-void add_cmdname(struct cmdnames *cmds, const char *name, int len);
+void add_cmdname(struct cmdnames *cmds, const char *name, size_t len);
 /* Here we require that excludes is a sorted list. */
 void exclude_cmds(struct cmdnames *cmds, struct cmdnames *excludes);
 int is_in_cmdlist(struct cmdnames *c, const char *s);
diff --git a/tools/perf/util/include/asm/system.h b/tools/perf/util/include/asm/system.h
new file mode 100644
index 00000000000..710cecca972
--- /dev/null
+++ b/tools/perf/util/include/asm/system.h
@@ -0,0 +1 @@
+/* Empty */
diff --git a/tools/perf/util/include/linux/kernel.h b/tools/perf/util/include/linux/kernel.h
new file mode 100644
index 00000000000..a6b87390cb5
--- /dev/null
+++ b/tools/perf/util/include/linux/kernel.h
@@ -0,0 +1,29 @@
+#ifndef PERF_LINUX_KERNEL_H_
+#define PERF_LINUX_KERNEL_H_
+
+#ifndef offsetof
+#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+#endif
+
+#ifndef container_of
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr:	the pointer to the member.
+ * @type:	the type of the container struct this is embedded in.
+ * @member:	the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({			\
+	const typeof(((type *)0)->member) * __mptr = (ptr);	\
+	(type *)((char *)__mptr - offsetof(type, member)); })
+#endif
+
+#ifndef max
+#define max(x, y) ({				\
+	typeof(x) _max1 = (x);			\
+	typeof(y) _max2 = (y);			\
+	(void) (&_max1 == &_max2);		\
+	_max1 > _max2 ? _max1 : _max2; })
+#endif
+
+#endif
diff --git a/tools/perf/util/include/linux/list.h b/tools/perf/util/include/linux/list.h
new file mode 100644
index 00000000000..dbe4b814382
--- /dev/null
+++ b/tools/perf/util/include/linux/list.h
@@ -0,0 +1,18 @@
+#include "../../../../include/linux/list.h"
+
+#ifndef PERF_LIST_H
+#define PERF_LIST_H
+/**
+ * list_del_range - deletes range of entries from list.
+ * @begin: first element in the range to delete from the list.
+ * @end: last element in the range to delete from the list.
+ * Note: list_empty on the range of entries does not return true after this,
+ * the entries is in an undefined state.
+ */
+static inline void list_del_range(struct list_head *begin,
+				  struct list_head *end)
+{
+	begin->prev->next = end->next;
+	end->next->prev = begin->prev;
+}
+#endif
diff --git a/tools/perf/util/include/linux/module.h b/tools/perf/util/include/linux/module.h
new file mode 100644
index 00000000000..b43e2dc21e0
--- /dev/null
+++ b/tools/perf/util/include/linux/module.h
@@ -0,0 +1,6 @@
+#ifndef PERF_LINUX_MODULE_H
+#define PERF_LINUX_MODULE_H
+
+#define EXPORT_SYMBOL(name)
+
+#endif
diff --git a/tools/perf/util/include/linux/poison.h b/tools/perf/util/include/linux/poison.h
new file mode 100644
index 00000000000..fef6dbc9ce1
--- /dev/null
+++ b/tools/perf/util/include/linux/poison.h
@@ -0,0 +1 @@
+#include "../../../../include/linux/poison.h"
diff --git a/tools/perf/util/include/linux/prefetch.h b/tools/perf/util/include/linux/prefetch.h
new file mode 100644
index 00000000000..7841e485d8c
--- /dev/null
+++ b/tools/perf/util/include/linux/prefetch.h
@@ -0,0 +1,6 @@
+#ifndef PERF_LINUX_PREFETCH_H
+#define PERF_LINUX_PREFETCH_H
+
+static inline void prefetch(void *a __attribute__((unused))) { }
+
+#endif
diff --git a/tools/perf/util/include/linux/rbtree.h b/tools/perf/util/include/linux/rbtree.h
new file mode 100644
index 00000000000..7a243a14303
--- /dev/null
+++ b/tools/perf/util/include/linux/rbtree.h
@@ -0,0 +1 @@
+#include "../../../../include/linux/rbtree.h"
diff --git a/tools/perf/util/list.h b/tools/perf/util/list.h
deleted file mode 100644
index e2548e8072c..00000000000
--- a/tools/perf/util/list.h
+++ /dev/null
@@ -1,603 +0,0 @@
-#ifndef _LINUX_LIST_H
-#define _LINUX_LIST_H
-/*
-  Copyright (C) Cast of dozens, comes from the Linux kernel
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms of version 2 of the GNU General Public License as
-  published by the Free Software Foundation.
-*/
-
-#include <stddef.h>
-
-/*
- * These are non-NULL pointers that will result in page faults
- * under normal circumstances, used to verify that nobody uses
- * non-initialized list entries.
- */
-#define LIST_POISON1 ((void *)0x00100100)
-#define LIST_POISON2 ((void *)0x00200200)
-
-/**
- * container_of - cast a member of a structure out to the containing structure
- * @ptr:	the pointer to the member.
- * @type:	the type of the container struct this is embedded in.
- * @member:	the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({			\
-        const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
-        (type *)( (char *)__mptr - offsetof(type,member) );})
-
-/*
- * Simple doubly linked list implementation.
- *
- * Some of the internal functions ("__xxx") are useful when
- * manipulating whole lists rather than single entries, as
- * sometimes we already know the next/prev entries and we can
- * generate better code by using them directly rather than
- * using the generic single-entry routines.
- */
-
-struct list_head {
-	struct list_head *next, *prev;
-};
-
-#define LIST_HEAD_INIT(name) { &(name), &(name) }
-
-#define LIST_HEAD(name) \
-	struct list_head name = LIST_HEAD_INIT(name)
-
-static inline void INIT_LIST_HEAD(struct list_head *list)
-{
-	list->next = list;
-	list->prev = list;
-}
-
-/*
- * Insert a new entry between two known consecutive entries.
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-static inline void __list_add(struct list_head *new,
-			      struct list_head *prev,
-			      struct list_head *next)
-{
-	next->prev = new;
-	new->next = next;
-	new->prev = prev;
-	prev->next = new;
-}
-
-/**
- * list_add - add a new entry
- * @new: new entry to be added
- * @head: list head to add it after
- *
- * Insert a new entry after the specified head.
- * This is good for implementing stacks.
- */
-static inline void list_add(struct list_head *new, struct list_head *head)
-{
-	__list_add(new, head, head->next);
-}
-
-/**
- * list_add_tail - add a new entry
- * @new: new entry to be added
- * @head: list head to add it before
- *
- * Insert a new entry before the specified head.
- * This is useful for implementing queues.
- */
-static inline void list_add_tail(struct list_head *new, struct list_head *head)
-{
-	__list_add(new, head->prev, head);
-}
-
-/*
- * Delete a list entry by making the prev/next entries
- * point to each other.
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-static inline void __list_del(struct list_head * prev, struct list_head * next)
-{
-	next->prev = prev;
-	prev->next = next;
-}
-
-/**
- * list_del - deletes entry from list.
- * @entry: the element to delete from the list.
- * Note: list_empty on entry does not return true after this, the entry is
- * in an undefined state.
- */
-static inline void list_del(struct list_head *entry)
-{
-	__list_del(entry->prev, entry->next);
-	entry->next = LIST_POISON1;
-	entry->prev = LIST_POISON2;
-}
-
-/**
- * list_del_range - deletes range of entries from list.
- * @beging: first element in the range to delete from the list.
- * @beging: first element in the range to delete from the list.
- * Note: list_empty on the range of entries does not return true after this,
- * the entries is in an undefined state.
- */
-static inline void list_del_range(struct list_head *begin,
-				  struct list_head *end)
-{
-	begin->prev->next = end->next;
-	end->next->prev = begin->prev;
-}
-
-/**
- * list_replace - replace old entry by new one
- * @old : the element to be replaced
- * @new : the new element to insert
- * Note: if 'old' was empty, it will be overwritten.
- */
-static inline void list_replace(struct list_head *old,
-				struct list_head *new)
-{
-	new->next = old->next;
-	new->next->prev = new;
-	new->prev = old->prev;
-	new->prev->next = new;
-}
-
-static inline void list_replace_init(struct list_head *old,
-					struct list_head *new)
-{
-	list_replace(old, new);
-	INIT_LIST_HEAD(old);
-}
-
-/**
- * list_del_init - deletes entry from list and reinitialize it.
- * @entry: the element to delete from the list.
- */
-static inline void list_del_init(struct list_head *entry)
-{
-	__list_del(entry->prev, entry->next);
-	INIT_LIST_HEAD(entry);
-}
-
-/**
- * list_move - delete from one list and add as another's head
- * @list: the entry to move
- * @head: the head that will precede our entry
- */
-static inline void list_move(struct list_head *list, struct list_head *head)
-{
-        __list_del(list->prev, list->next);
-        list_add(list, head);
-}
-
-/**
- * list_move_tail - delete from one list and add as another's tail
- * @list: the entry to move
- * @head: the head that will follow our entry
- */
-static inline void list_move_tail(struct list_head *list,
-				  struct list_head *head)
-{
-        __list_del(list->prev, list->next);
-        list_add_tail(list, head);
-}
-
-/**
- * list_is_last - tests whether @list is the last entry in list @head
- * @list: the entry to test
- * @head: the head of the list
- */
-static inline int list_is_last(const struct list_head *list,
-				const struct list_head *head)
-{
-	return list->next == head;
-}
-
-/**
- * list_empty - tests whether a list is empty
- * @head: the list to test.
- */
-static inline int list_empty(const struct list_head *head)
-{
-	return head->next == head;
-}
-
-/**
- * list_empty_careful - tests whether a list is empty and not being modified
- * @head: the list to test
- *
- * Description:
- * tests whether a list is empty _and_ checks that no other CPU might be
- * in the process of modifying either member (next or prev)
- *
- * NOTE: using list_empty_careful() without synchronization
- * can only be safe if the only activity that can happen
- * to the list entry is list_del_init(). Eg. it cannot be used
- * if another CPU could re-list_add() it.
- */
-static inline int list_empty_careful(const struct list_head *head)
-{
-	struct list_head *next = head->next;
-	return (next == head) && (next == head->prev);
-}
-
-static inline void __list_splice(struct list_head *list,
-				 struct list_head *head)
-{
-	struct list_head *first = list->next;
-	struct list_head *last = list->prev;
-	struct list_head *at = head->next;
-
-	first->prev = head;
-	head->next = first;
-
-	last->next = at;
-	at->prev = last;
-}
-
-/**
- * list_splice - join two lists
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- */
-static inline void list_splice(struct list_head *list, struct list_head *head)
-{
-	if (!list_empty(list))
-		__list_splice(list, head);
-}
-
-/**
- * list_splice_init - join two lists and reinitialise the emptied list.
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- *
- * The list at @list is reinitialised
- */
-static inline void list_splice_init(struct list_head *list,
-				    struct list_head *head)
-{
-	if (!list_empty(list)) {
-		__list_splice(list, head);
-		INIT_LIST_HEAD(list);
-	}
-}
-
-/**
- * list_entry - get the struct for this entry
- * @ptr:	the &struct list_head pointer.
- * @type:	the type of the struct this is embedded in.
- * @member:	the name of the list_struct within the struct.
- */
-#define list_entry(ptr, type, member) \
-	container_of(ptr, type, member)
-
-/**
- * list_first_entry - get the first element from a list
- * @ptr:       the list head to take the element from.
- * @type:      the type of the struct this is embedded in.
- * @member:    the name of the list_struct within the struct.
- *
- * Note, that list is expected to be not empty.
- */
-#define list_first_entry(ptr, type, member) \
-	list_entry((ptr)->next, type, member)
-
-/**
- * list_for_each	-	iterate over a list
- * @pos:	the &struct list_head to use as a loop cursor.
- * @head:	the head for your list.
- */
-#define list_for_each(pos, head) \
-	for (pos = (head)->next; pos != (head); \
-        	pos = pos->next)
-
-/**
- * __list_for_each	-	iterate over a list
- * @pos:	the &struct list_head to use as a loop cursor.
- * @head:	the head for your list.
- *
- * This variant differs from list_for_each() in that it's the
- * simplest possible list iteration code, no prefetching is done.
- * Use this for code that knows the list to be very short (empty
- * or 1 entry) most of the time.
- */
-#define __list_for_each(pos, head) \
-	for (pos = (head)->next; pos != (head); pos = pos->next)
-
-/**
- * list_for_each_prev	-	iterate over a list backwards
- * @pos:	the &struct list_head to use as a loop cursor.
- * @head:	the head for your list.
- */
-#define list_for_each_prev(pos, head) \
-	for (pos = (head)->prev; pos != (head); \
-        	pos = pos->prev)
-
-/**
- * list_for_each_safe - iterate over a list safe against removal of list entry
- * @pos:	the &struct list_head to use as a loop cursor.
- * @n:		another &struct list_head to use as temporary storage
- * @head:	the head for your list.
- */
-#define list_for_each_safe(pos, n, head) \
-	for (pos = (head)->next, n = pos->next; pos != (head); \
-		pos = n, n = pos->next)
-
-/**
- * list_for_each_entry	-	iterate over list of given type
- * @pos:	the type * to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- */
-#define list_for_each_entry(pos, head, member)				\
-	for (pos = list_entry((head)->next, typeof(*pos), member);	\
-	     &pos->member != (head); 	\
-	     pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_reverse - iterate backwards over list of given type.
- * @pos:	the type * to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- */
-#define list_for_each_entry_reverse(pos, head, member)			\
-	for (pos = list_entry((head)->prev, typeof(*pos), member);	\
-	     &pos->member != (head); 	\
-	     pos = list_entry(pos->member.prev, typeof(*pos), member))
-
-/**
- * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue
- * @pos:	the type * to use as a start point
- * @head:	the head of the list
- * @member:	the name of the list_struct within the struct.
- *
- * Prepares a pos entry for use as a start point in list_for_each_entry_continue.
- */
-#define list_prepare_entry(pos, head, member) \
-	((pos) ? : list_entry(head, typeof(*pos), member))
-
-/**
- * list_for_each_entry_continue - continue iteration over list of given type
- * @pos:	the type * to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- *
- * Continue to iterate over list of given type, continuing after
- * the current position.
- */
-#define list_for_each_entry_continue(pos, head, member) 		\
-	for (pos = list_entry(pos->member.next, typeof(*pos), member);	\
-	     &pos->member != (head);	\
-	     pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_from - iterate over list of given type from the current point
- * @pos:	the type * to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- *
- * Iterate over list of given type, continuing from current position.
- */
-#define list_for_each_entry_from(pos, head, member) 			\
-	for (; &pos->member != (head);	\
-	     pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @pos:	the type * to use as a loop cursor.
- * @n:		another type * to use as temporary storage
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- */
-#define list_for_each_entry_safe(pos, n, head, member)			\
-	for (pos = list_entry((head)->next, typeof(*pos), member),	\
-		n = list_entry(pos->member.next, typeof(*pos), member);	\
-	     &pos->member != (head); 					\
-	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_continue
- * @pos:	the type * to use as a loop cursor.
- * @n:		another type * to use as temporary storage
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- *
- * Iterate over list of given type, continuing after current point,
- * safe against removal of list entry.
- */
-#define list_for_each_entry_safe_continue(pos, n, head, member) 		\
-	for (pos = list_entry(pos->member.next, typeof(*pos), member), 		\
-		n = list_entry(pos->member.next, typeof(*pos), member);		\
-	     &pos->member != (head);						\
-	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_from
- * @pos:	the type * to use as a loop cursor.
- * @n:		another type * to use as temporary storage
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- *
- * Iterate over list of given type from current point, safe against
- * removal of list entry.
- */
-#define list_for_each_entry_safe_from(pos, n, head, member) 			\
-	for (n = list_entry(pos->member.next, typeof(*pos), member);		\
-	     &pos->member != (head);						\
-	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_reverse
- * @pos:	the type * to use as a loop cursor.
- * @n:		another type * to use as temporary storage
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- *
- * Iterate backwards over list of given type, safe against removal
- * of list entry.
- */
-#define list_for_each_entry_safe_reverse(pos, n, head, member)		\
-	for (pos = list_entry((head)->prev, typeof(*pos), member),	\
-		n = list_entry(pos->member.prev, typeof(*pos), member);	\
-	     &pos->member != (head); 					\
-	     pos = n, n = list_entry(n->member.prev, typeof(*n), member))
-
-/*
- * Double linked lists with a single pointer list head.
- * Mostly useful for hash tables where the two pointer list head is
- * too wasteful.
- * You lose the ability to access the tail in O(1).
- */
-
-struct hlist_head {
-	struct hlist_node *first;
-};
-
-struct hlist_node {
-	struct hlist_node *next, **pprev;
-};
-
-#define HLIST_HEAD_INIT { .first = NULL }
-#define HLIST_HEAD(name) struct hlist_head name = {  .first = NULL }
-#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL)
-static inline void INIT_HLIST_NODE(struct hlist_node *h)
-{
-	h->next = NULL;
-	h->pprev = NULL;
-}
-
-static inline int hlist_unhashed(const struct hlist_node *h)
-{
-	return !h->pprev;
-}
-
-static inline int hlist_empty(const struct hlist_head *h)
-{
-	return !h->first;
-}
-
-static inline void __hlist_del(struct hlist_node *n)
-{
-	struct hlist_node *next = n->next;
-	struct hlist_node **pprev = n->pprev;
-	*pprev = next;
-	if (next)
-		next->pprev = pprev;
-}
-
-static inline void hlist_del(struct hlist_node *n)
-{
-	__hlist_del(n);
-	n->next = LIST_POISON1;
-	n->pprev = LIST_POISON2;
-}
-
-static inline void hlist_del_init(struct hlist_node *n)
-{
-	if (!hlist_unhashed(n)) {
-		__hlist_del(n);
-		INIT_HLIST_NODE(n);
-	}
-}
-
-static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
-{
-	struct hlist_node *first = h->first;
-	n->next = first;
-	if (first)
-		first->pprev = &n->next;
-	h->first = n;
-	n->pprev = &h->first;
-}
-
-/* next must be != NULL */
-static inline void hlist_add_before(struct hlist_node *n,
-					struct hlist_node *next)
-{
-	n->pprev = next->pprev;
-	n->next = next;
-	next->pprev = &n->next;
-	*(n->pprev) = n;
-}
-
-static inline void hlist_add_after(struct hlist_node *n,
-					struct hlist_node *next)
-{
-	next->next = n->next;
-	n->next = next;
-	next->pprev = &n->next;
-
-	if(next->next)
-		next->next->pprev  = &next->next;
-}
-
-#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
-
-#define hlist_for_each(pos, head) \
-	for (pos = (head)->first; pos; \
-	     pos = pos->next)
-
-#define hlist_for_each_safe(pos, n, head) \
-	for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \
-	     pos = n)
-
-/**
- * hlist_for_each_entry	- iterate over list of given type
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry(tpos, pos, head, member)			 \
-	for (pos = (head)->first;					 \
-	     pos && 			 \
-		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
-	     pos = pos->next)
-
-/**
- * hlist_for_each_entry_continue - iterate over a hlist continuing after current point
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @member:	the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_continue(tpos, pos, member)		 \
-	for (pos = (pos)->next;						 \
-	     pos && 			 \
-		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
-	     pos = pos->next)
-
-/**
- * hlist_for_each_entry_from - iterate over a hlist continuing from current point
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @member:	the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_from(tpos, pos, member)			 \
-	for (; pos && 			 \
-		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
-	     pos = pos->next)
-
-/**
- * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @n:		another &struct hlist_node to use as temporary storage
- * @head:	the head for your list.
- * @member:	the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_safe(tpos, pos, n, head, member) 		 \
-	for (pos = (head)->first;					 \
-	     pos && ({ n = pos->next; 1; }) && 				 \
-		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
-	     pos = n)
-
-#endif
diff --git a/tools/perf/util/module.c b/tools/perf/util/module.c
new file mode 100644
index 00000000000..ddabe925d65
--- /dev/null
+++ b/tools/perf/util/module.c
@@ -0,0 +1,509 @@
+#include "util.h"
+#include "../perf.h"
+#include "string.h"
+#include "module.h"
+
+#include <libelf.h>
+#include <gelf.h>
+#include <elf.h>
+#include <dirent.h>
+#include <sys/utsname.h>
+
+static unsigned int crc32(const char *p, unsigned int len)
+{
+	int i;
+	unsigned int crc = 0;
+
+	while (len--) {
+		crc ^= *p++;
+		for (i = 0; i < 8; i++)
+			crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
+	}
+	return crc;
+}
+
+/* module section methods */
+
+struct sec_dso *sec_dso__new_dso(const char *name)
+{
+	struct sec_dso *self = malloc(sizeof(*self) + strlen(name) + 1);
+
+	if (self != NULL) {
+		strcpy(self->name, name);
+		self->secs = RB_ROOT;
+		self->find_section = sec_dso__find_section;
+	}
+
+	return self;
+}
+
+static void sec_dso__delete_section(struct section *self)
+{
+	free(((void *)self));
+}
+
+void sec_dso__delete_sections(struct sec_dso *self)
+{
+	struct section *pos;
+	struct rb_node *next = rb_first(&self->secs);
+
+	while (next) {
+		pos = rb_entry(next, struct section, rb_node);
+		next = rb_next(&pos->rb_node);
+		rb_erase(&pos->rb_node, &self->secs);
+		sec_dso__delete_section(pos);
+	}
+}
+
+void sec_dso__delete_self(struct sec_dso *self)
+{
+	sec_dso__delete_sections(self);
+	free(self);
+}
+
+static void sec_dso__insert_section(struct sec_dso *self, struct section *sec)
+{
+	struct rb_node **p = &self->secs.rb_node;
+	struct rb_node *parent = NULL;
+	const u64 hash = sec->hash;
+	struct section *s;
+
+	while (*p != NULL) {
+		parent = *p;
+		s = rb_entry(parent, struct section, rb_node);
+		if (hash < s->hash)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+	rb_link_node(&sec->rb_node, parent, p);
+	rb_insert_color(&sec->rb_node, &self->secs);
+}
+
+struct section *sec_dso__find_section(struct sec_dso *self, const char *name)
+{
+	struct rb_node *n;
+	u64 hash;
+	int len;
+
+	if (self == NULL)
+		return NULL;
+
+	len = strlen(name);
+	hash = crc32(name, len);
+
+	n = self->secs.rb_node;
+
+	while (n) {
+		struct section *s = rb_entry(n, struct section, rb_node);
+
+		if (hash < s->hash)
+			n = n->rb_left;
+		else if (hash > s->hash)
+			n = n->rb_right;
+		else {
+			if (!strcmp(name, s->name))
+				return s;
+			else
+				n = rb_next(&s->rb_node);
+		}
+	}
+
+	return NULL;
+}
+
+static size_t sec_dso__fprintf_section(struct section *self, FILE *fp)
+{
+	return fprintf(fp, "name:%s vma:%llx path:%s\n",
+		       self->name, self->vma, self->path);
+}
+
+size_t sec_dso__fprintf(struct sec_dso *self, FILE *fp)
+{
+	size_t ret = fprintf(fp, "dso: %s\n", self->name);
+
+	struct rb_node *nd;
+	for (nd = rb_first(&self->secs); nd; nd = rb_next(nd)) {
+		struct section *pos = rb_entry(nd, struct section, rb_node);
+		ret += sec_dso__fprintf_section(pos, fp);
+	}
+
+	return ret;
+}
+
+static struct section *section__new(const char *name, const char *path)
+{
+	struct section *self = calloc(1, sizeof(*self));
+
+	if (!self)
+		goto out_failure;
+
+	self->name = calloc(1, strlen(name) + 1);
+	if (!self->name)
+		goto out_failure;
+
+	self->path = calloc(1, strlen(path) + 1);
+	if (!self->path)
+		goto out_failure;
+
+	strcpy(self->name, name);
+	strcpy(self->path, path);
+	self->hash = crc32(self->name, strlen(name));
+
+	return self;
+
+out_failure:
+	if (self) {
+		if (self->name)
+			free(self->name);
+		if (self->path)
+			free(self->path);
+		free(self);
+	}
+
+	return NULL;
+}
+
+/* module methods */
+
+struct mod_dso *mod_dso__new_dso(const char *name)
+{
+	struct mod_dso *self = malloc(sizeof(*self) + strlen(name) + 1);
+
+	if (self != NULL) {
+		strcpy(self->name, name);
+		self->mods = RB_ROOT;
+		self->find_module = mod_dso__find_module;
+	}
+
+	return self;
+}
+
+static void mod_dso__delete_module(struct module *self)
+{
+	free(((void *)self));
+}
+
+void mod_dso__delete_modules(struct mod_dso *self)
+{
+	struct module *pos;
+	struct rb_node *next = rb_first(&self->mods);
+
+	while (next) {
+		pos = rb_entry(next, struct module, rb_node);
+		next = rb_next(&pos->rb_node);
+		rb_erase(&pos->rb_node, &self->mods);
+		mod_dso__delete_module(pos);
+	}
+}
+
+void mod_dso__delete_self(struct mod_dso *self)
+{
+	mod_dso__delete_modules(self);
+	free(self);
+}
+
+static void mod_dso__insert_module(struct mod_dso *self, struct module *mod)
+{
+	struct rb_node **p = &self->mods.rb_node;
+	struct rb_node *parent = NULL;
+	const u64 hash = mod->hash;
+	struct module *m;
+
+	while (*p != NULL) {
+		parent = *p;
+		m = rb_entry(parent, struct module, rb_node);
+		if (hash < m->hash)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+	rb_link_node(&mod->rb_node, parent, p);
+	rb_insert_color(&mod->rb_node, &self->mods);
+}
+
+struct module *mod_dso__find_module(struct mod_dso *self, const char *name)
+{
+	struct rb_node *n;
+	u64 hash;
+	int len;
+
+	if (self == NULL)
+		return NULL;
+
+	len = strlen(name);
+	hash = crc32(name, len);
+
+	n = self->mods.rb_node;
+
+	while (n) {
+		struct module *m = rb_entry(n, struct module, rb_node);
+
+		if (hash < m->hash)
+			n = n->rb_left;
+		else if (hash > m->hash)
+			n = n->rb_right;
+		else {
+			if (!strcmp(name, m->name))
+				return m;
+			else
+				n = rb_next(&m->rb_node);
+		}
+	}
+
+	return NULL;
+}
+
+static size_t mod_dso__fprintf_module(struct module *self, FILE *fp)
+{
+	return fprintf(fp, "name:%s path:%s\n", self->name, self->path);
+}
+
+size_t mod_dso__fprintf(struct mod_dso *self, FILE *fp)
+{
+	struct rb_node *nd;
+	size_t ret;
+
+	ret = fprintf(fp, "dso: %s\n", self->name);
+
+	for (nd = rb_first(&self->mods); nd; nd = rb_next(nd)) {
+		struct module *pos = rb_entry(nd, struct module, rb_node);
+
+		ret += mod_dso__fprintf_module(pos, fp);
+	}
+
+	return ret;
+}
+
+static struct module *module__new(const char *name, const char *path)
+{
+	struct module *self = calloc(1, sizeof(*self));
+
+	if (!self)
+		goto out_failure;
+
+	self->name = calloc(1, strlen(name) + 1);
+	if (!self->name)
+		goto out_failure;
+
+	self->path = calloc(1, strlen(path) + 1);
+	if (!self->path)
+		goto out_failure;
+
+	strcpy(self->name, name);
+	strcpy(self->path, path);
+	self->hash = crc32(self->name, strlen(name));
+
+	return self;
+
+out_failure:
+	if (self) {
+		if (self->name)
+			free(self->name);
+		if (self->path)
+			free(self->path);
+		free(self);
+	}
+
+	return NULL;
+}
+
+static int mod_dso__load_sections(struct module *mod)
+{
+	int count = 0, path_len;
+	struct dirent *entry;
+	char *line = NULL;
+	char *dir_path;
+	DIR *dir;
+	size_t n;
+
+	path_len = strlen("/sys/module/");
+	path_len += strlen(mod->name);
+	path_len += strlen("/sections/");
+
+	dir_path = calloc(1, path_len + 1);
+	if (dir_path == NULL)
+		goto out_failure;
+
+	strcat(dir_path, "/sys/module/");
+	strcat(dir_path, mod->name);
+	strcat(dir_path, "/sections/");
+
+	dir = opendir(dir_path);
+	if (dir == NULL)
+		goto out_free;
+
+	while ((entry = readdir(dir))) {
+		struct section *section;
+		char *path, *vma;
+		int line_len;
+		FILE *file;
+
+		if (!strcmp(".", entry->d_name) || !strcmp("..", entry->d_name))
+			continue;
+
+		path = calloc(1, path_len + strlen(entry->d_name) + 1);
+		if (path == NULL)
+			break;
+		strcat(path, dir_path);
+		strcat(path, entry->d_name);
+
+		file = fopen(path, "r");
+		if (file == NULL) {
+			free(path);
+			break;
+		}
+
+		line_len = getline(&line, &n, file);
+		if (line_len < 0) {
+			free(path);
+			fclose(file);
+			break;
+		}
+
+		if (!line) {
+			free(path);
+			fclose(file);
+			break;
+		}
+
+		line[--line_len] = '\0'; /* \n */
+
+		vma = strstr(line, "0x");
+		if (!vma) {
+			free(path);
+			fclose(file);
+			break;
+		}
+		vma += 2;
+
+		section = section__new(entry->d_name, path);
+		if (!section) {
+			fprintf(stderr, "load_sections: allocation error\n");
+			free(path);
+			fclose(file);
+			break;
+		}
+
+		hex2u64(vma, &section->vma);
+		sec_dso__insert_section(mod->sections, section);
+
+		free(path);
+		fclose(file);
+		count++;
+	}
+
+	closedir(dir);
+	free(line);
+	free(dir_path);
+
+	return count;
+
+out_free:
+	free(dir_path);
+
+out_failure:
+	return count;
+}
+
+static int mod_dso__load_module_paths(struct mod_dso *self)
+{
+	struct utsname uts;
+	int count = 0, len;
+	char *line = NULL;
+	FILE *file;
+	char *path;
+	size_t n;
+
+	if (uname(&uts) < 0)
+		goto out_failure;
+
+	len = strlen("/lib/modules/");
+	len += strlen(uts.release);
+	len += strlen("/modules.dep");
+
+	path = calloc(1, len);
+	if (path == NULL)
+		goto out_failure;
+
+	strcat(path, "/lib/modules/");
+	strcat(path, uts.release);
+	strcat(path, "/modules.dep");
+
+	file = fopen(path, "r");
+	free(path);
+	if (file == NULL)
+		goto out_failure;
+
+	while (!feof(file)) {
+		char *path, *name, *tmp;
+		struct module *module;
+		int line_len, len;
+
+		line_len = getline(&line, &n, file);
+		if (line_len < 0)
+			break;
+
+		if (!line)
+			goto out_failure;
+
+		line[--line_len] = '\0'; /* \n */
+
+		path = strtok(line, ":");
+		if (!path)
+			goto out_failure;
+
+		name = strdup(path);
+		name = strtok(name, "/");
+
+		tmp = name;
+
+		while (tmp) {
+			tmp = strtok(NULL, "/");
+			if (tmp)
+				name = tmp;
+		}
+		name = strsep(&name, ".");
+
+		/* Quirk: replace '-' with '_' in sound modules */
+		for (len = strlen(name); len; len--) {
+			if (*(name+len) == '-')
+				*(name+len) = '_';
+		}
+
+		module = module__new(name, path);
+		if (!module) {
+			fprintf(stderr, "load_module_paths: allocation error\n");
+			goto out_failure;
+		}
+		mod_dso__insert_module(self, module);
+
+		module->sections = sec_dso__new_dso("sections");
+		if (!module->sections) {
+			fprintf(stderr, "load_module_paths: allocation error\n");
+			goto out_failure;
+		}
+
+		module->active = mod_dso__load_sections(module);
+
+		if (module->active > 0)
+			count++;
+	}
+
+	free(line);
+	fclose(file);
+
+	return count;
+
+out_failure:
+	return -1;
+}
+
+int mod_dso__load_modules(struct mod_dso *dso)
+{
+	int err;
+
+	err = mod_dso__load_module_paths(dso);
+
+	return err;
+}
diff --git a/tools/perf/util/module.h b/tools/perf/util/module.h
new file mode 100644
index 00000000000..8a592ef641c
--- /dev/null
+++ b/tools/perf/util/module.h
@@ -0,0 +1,53 @@
+#ifndef _PERF_MODULE_
+#define _PERF_MODULE_ 1
+
+#include <linux/types.h>
+#include "../types.h"
+#include <linux/list.h>
+#include <linux/rbtree.h>
+
+struct section {
+	struct rb_node	rb_node;
+	u64		hash;
+	u64		vma;
+	char		*name;
+	char		*path;
+};
+
+struct sec_dso {
+	struct list_head node;
+	struct rb_root	 secs;
+	struct section    *(*find_section)(struct sec_dso *, const char *name);
+	char		 name[0];
+};
+
+struct module {
+	struct rb_node	rb_node;
+	u64		hash;
+	char		*name;
+	char		*path;
+	struct sec_dso	*sections;
+	int		active;
+};
+
+struct mod_dso {
+	struct list_head node;
+	struct rb_root	 mods;
+	struct module    *(*find_module)(struct mod_dso *, const char *name);
+	char		 name[0];
+};
+
+struct sec_dso *sec_dso__new_dso(const char *name);
+void sec_dso__delete_sections(struct sec_dso *self);
+void sec_dso__delete_self(struct sec_dso *self);
+size_t sec_dso__fprintf(struct sec_dso *self, FILE *fp);
+struct section *sec_dso__find_section(struct sec_dso *self, const char *name);
+
+struct mod_dso *mod_dso__new_dso(const char *name);
+void mod_dso__delete_modules(struct mod_dso *self);
+void mod_dso__delete_self(struct mod_dso *self);
+size_t mod_dso__fprintf(struct mod_dso *self, FILE *fp);
+struct module *mod_dso__find_module(struct mod_dso *self, const char *name);
+int mod_dso__load_modules(struct mod_dso *dso);
+
+#endif /* _PERF_MODULE_ */
diff --git a/tools/perf/util/pager.c b/tools/perf/util/pager.c
index a28bccae545..1915de20dca 100644
--- a/tools/perf/util/pager.c
+++ b/tools/perf/util/pager.c
@@ -9,7 +9,6 @@
 
 static int spawned_pager;
 
-#ifndef __MINGW32__
 static void pager_preexec(void)
 {
 	/*
@@ -24,7 +23,6 @@ static void pager_preexec(void)
 
 	setenv("LESS", "FRSX", 0);
 }
-#endif
 
 static const char *pager_argv[] = { "sh", "-c", NULL, NULL };
 static struct child_process pager_process;
@@ -70,9 +68,8 @@ void setup_pager(void)
 	pager_argv[2] = pager;
 	pager_process.argv = pager_argv;
 	pager_process.in = -1;
-#ifndef __MINGW32__
 	pager_process.preexec_cb = pager_preexec;
-#endif
+
 	if (start_command(&pager_process))
 		return;
 
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 35d04da38d6..04417840878 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -5,6 +5,7 @@
 #include "parse-events.h"
 #include "exec_cmd.h"
 #include "string.h"
+#include "cache.h"
 
 extern char *strcasestr(const char *haystack, const char *needle);
 
@@ -16,32 +17,30 @@ struct event_symbol {
 	u8	type;
 	u64	config;
 	char	*symbol;
+	char	*alias;
 };
 
-#define C(x, y) .type = PERF_TYPE_##x, .config = PERF_COUNT_##y
-#define CR(x, y) .type = PERF_TYPE_##x, .config = y
+char debugfs_path[MAXPATHLEN];
+
+#define CHW(x) .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_##x
+#define CSW(x) .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_##x
 
 static struct event_symbol event_symbols[] = {
-  { C(HARDWARE, HW_CPU_CYCLES),		"cpu-cycles",		},
-  { C(HARDWARE, HW_CPU_CYCLES),		"cycles",		},
-  { C(HARDWARE, HW_INSTRUCTIONS),	"instructions",		},
-  { C(HARDWARE, HW_CACHE_REFERENCES),	"cache-references",	},
-  { C(HARDWARE, HW_CACHE_MISSES),	"cache-misses",		},
-  { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branch-instructions",	},
-  { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branches",		},
-  { C(HARDWARE, HW_BRANCH_MISSES),	"branch-misses",	},
-  { C(HARDWARE, HW_BUS_CYCLES),		"bus-cycles",		},
-
-  { C(SOFTWARE, SW_CPU_CLOCK),		"cpu-clock",		},
-  { C(SOFTWARE, SW_TASK_CLOCK),		"task-clock",		},
-  { C(SOFTWARE, SW_PAGE_FAULTS),	"page-faults",		},
-  { C(SOFTWARE, SW_PAGE_FAULTS),	"faults",		},
-  { C(SOFTWARE, SW_PAGE_FAULTS_MIN),	"minor-faults",		},
-  { C(SOFTWARE, SW_PAGE_FAULTS_MAJ),	"major-faults",		},
-  { C(SOFTWARE, SW_CONTEXT_SWITCHES),	"context-switches",	},
-  { C(SOFTWARE, SW_CONTEXT_SWITCHES),	"cs",			},
-  { C(SOFTWARE, SW_CPU_MIGRATIONS),	"cpu-migrations",	},
-  { C(SOFTWARE, SW_CPU_MIGRATIONS),	"migrations",		},
+  { CHW(CPU_CYCLES),		"cpu-cycles",		"cycles"	},
+  { CHW(INSTRUCTIONS),		"instructions",		""		},
+  { CHW(CACHE_REFERENCES),	"cache-references",	""		},
+  { CHW(CACHE_MISSES),		"cache-misses",		""		},
+  { CHW(BRANCH_INSTRUCTIONS),	"branch-instructions",	"branches"	},
+  { CHW(BRANCH_MISSES),		"branch-misses",	""		},
+  { CHW(BUS_CYCLES),		"bus-cycles",		""		},
+
+  { CSW(CPU_CLOCK),		"cpu-clock",		""		},
+  { CSW(TASK_CLOCK),		"task-clock",		""		},
+  { CSW(PAGE_FAULTS),		"page-faults",		"faults"	},
+  { CSW(PAGE_FAULTS_MIN),	"minor-faults",		""		},
+  { CSW(PAGE_FAULTS_MAJ),	"major-faults",		""		},
+  { CSW(CONTEXT_SWITCHES),	"context-switches",	"cs"		},
+  { CSW(CPU_MIGRATIONS),	"cpu-migrations",	"migrations"	},
 };
 
 #define __PERF_COUNTER_FIELD(config, name) \
@@ -74,33 +73,181 @@ static char *sw_event_names[] = {
 
 #define MAX_ALIASES 8
 
-static char *hw_cache [][MAX_ALIASES] = {
-	{ "L1-data"		, "l1-d", "l1d"					},
-	{ "L1-instruction"	, "l1-i", "l1i"					},
-	{ "L2"			, "l2"						},
-	{ "Data-TLB"		, "dtlb", "d-tlb"				},
-	{ "Instruction-TLB"	, "itlb", "i-tlb"				},
-	{ "Branch"		, "bpu" , "btb", "bpc"				},
+static char *hw_cache[][MAX_ALIASES] = {
+ { "L1-dcache",	"l1-d",		"l1d",		"L1-data",		},
+ { "L1-icache",	"l1-i",		"l1i",		"L1-instruction",	},
+ { "LLC",	"L2"							},
+ { "dTLB",	"d-tlb",	"Data-TLB",				},
+ { "iTLB",	"i-tlb",	"Instruction-TLB",			},
+ { "branch",	"branches",	"bpu",		"btb",		"bpc",	},
 };
 
-static char *hw_cache_op [][MAX_ALIASES] = {
-	{ "Load"		, "read"					},
-	{ "Store"		, "write"					},
-	{ "Prefetch"		, "speculative-read", "speculative-load"	},
+static char *hw_cache_op[][MAX_ALIASES] = {
+ { "load",	"loads",	"read",					},
+ { "store",	"stores",	"write",				},
+ { "prefetch",	"prefetches",	"speculative-read", "speculative-load",	},
 };
 
-static char *hw_cache_result [][MAX_ALIASES] = {
-	{ "Reference"		, "ops", "access"				},
-	{ "Miss"								},
+static char *hw_cache_result[][MAX_ALIASES] = {
+ { "refs",	"Reference",	"ops",		"access",		},
+ { "misses",	"miss",							},
 };
 
+#define C(x)		PERF_COUNT_HW_CACHE_##x
+#define CACHE_READ	(1 << C(OP_READ))
+#define CACHE_WRITE	(1 << C(OP_WRITE))
+#define CACHE_PREFETCH	(1 << C(OP_PREFETCH))
+#define COP(x)		(1 << x)
+
+/*
+ * cache operartion stat
+ * L1I : Read and prefetch only
+ * ITLB and BPU : Read-only
+ */
+static unsigned long hw_cache_stat[C(MAX)] = {
+ [C(L1D)]	= (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(L1I)]	= (CACHE_READ | CACHE_PREFETCH),
+ [C(LL)]	= (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(DTLB)]	= (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(ITLB)]	= (CACHE_READ),
+ [C(BPU)]	= (CACHE_READ),
+};
+
+#define for_each_subsystem(sys_dir, sys_dirent, sys_next, file, st)	       \
+	while (!readdir_r(sys_dir, &sys_dirent, &sys_next) && sys_next)	       \
+	if (snprintf(file, MAXPATHLEN, "%s/%s", debugfs_path,	       	       \
+			sys_dirent.d_name) &&		       		       \
+	   (!stat(file, &st)) && (S_ISDIR(st.st_mode)) &&		       \
+	   (strcmp(sys_dirent.d_name, ".")) &&				       \
+	   (strcmp(sys_dirent.d_name, "..")))
+
+static int tp_event_has_id(struct dirent *sys_dir, struct dirent *evt_dir)
+{
+	char evt_path[MAXPATHLEN];
+	int fd;
+
+	snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", debugfs_path,
+			sys_dir->d_name, evt_dir->d_name);
+	fd = open(evt_path, O_RDONLY);
+	if (fd < 0)
+		return -EINVAL;
+	close(fd);
+
+	return 0;
+}
+
+#define for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next, file, st)    \
+	while (!readdir_r(evt_dir, &evt_dirent, &evt_next) && evt_next)        \
+	if (snprintf(file, MAXPATHLEN, "%s/%s/%s", debugfs_path,	       \
+		     sys_dirent.d_name, evt_dirent.d_name) &&		       \
+	   (!stat(file, &st)) && (S_ISDIR(st.st_mode)) &&		       \
+	   (strcmp(evt_dirent.d_name, ".")) &&				       \
+	   (strcmp(evt_dirent.d_name, "..")) &&				       \
+	   (!tp_event_has_id(&sys_dirent, &evt_dirent)))
+
+#define MAX_EVENT_LENGTH 30
+
+int valid_debugfs_mount(const char *debugfs)
+{
+	struct statfs st_fs;
+
+	if (statfs(debugfs, &st_fs) < 0)
+		return -ENOENT;
+	else if (st_fs.f_type != (long) DEBUGFS_MAGIC)
+		return -ENOENT;
+	return 0;
+}
+
+static char *tracepoint_id_to_name(u64 config)
+{
+	static char tracepoint_name[2 * MAX_EVENT_LENGTH];
+	DIR *sys_dir, *evt_dir;
+	struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
+	struct stat st;
+	char id_buf[4];
+	int fd;
+	u64 id;
+	char evt_path[MAXPATHLEN];
+
+	if (valid_debugfs_mount(debugfs_path))
+		return "unkown";
+
+	sys_dir = opendir(debugfs_path);
+	if (!sys_dir)
+		goto cleanup;
+
+	for_each_subsystem(sys_dir, sys_dirent, sys_next, evt_path, st) {
+		evt_dir = opendir(evt_path);
+		if (!evt_dir)
+			goto cleanup;
+		for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next,
+								evt_path, st) {
+			snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id",
+				 debugfs_path, sys_dirent.d_name,
+				 evt_dirent.d_name);
+			fd = open(evt_path, O_RDONLY);
+			if (fd < 0)
+				continue;
+			if (read(fd, id_buf, sizeof(id_buf)) < 0) {
+				close(fd);
+				continue;
+			}
+			close(fd);
+			id = atoll(id_buf);
+			if (id == config) {
+				closedir(evt_dir);
+				closedir(sys_dir);
+				snprintf(tracepoint_name, 2 * MAX_EVENT_LENGTH,
+					"%s:%s", sys_dirent.d_name,
+					evt_dirent.d_name);
+				return tracepoint_name;
+			}
+		}
+		closedir(evt_dir);
+	}
+
+cleanup:
+	closedir(sys_dir);
+	return "unkown";
+}
+
+static int is_cache_op_valid(u8 cache_type, u8 cache_op)
+{
+	if (hw_cache_stat[cache_type] & COP(cache_op))
+		return 1;	/* valid */
+	else
+		return 0;	/* invalid */
+}
+
+static char *event_cache_name(u8 cache_type, u8 cache_op, u8 cache_result)
+{
+	static char name[50];
+
+	if (cache_result) {
+		sprintf(name, "%s-%s-%s", hw_cache[cache_type][0],
+			hw_cache_op[cache_op][0],
+			hw_cache_result[cache_result][0]);
+	} else {
+		sprintf(name, "%s-%s", hw_cache[cache_type][0],
+			hw_cache_op[cache_op][1]);
+	}
+
+	return name;
+}
+
 char *event_name(int counter)
 {
 	u64 config = attrs[counter].config;
 	int type = attrs[counter].type;
+
+	return __event_name(type, config);
+}
+
+char *__event_name(int type, u64 config)
+{
 	static char buf[32];
 
-	if (attrs[counter].type == PERF_TYPE_RAW) {
+	if (type == PERF_TYPE_RAW) {
 		sprintf(buf, "raw 0x%llx", config);
 		return buf;
 	}
@@ -113,7 +260,6 @@ char *event_name(int counter)
 
 	case PERF_TYPE_HW_CACHE: {
 		u8 cache_type, cache_op, cache_result;
-		static char name[100];
 
 		cache_type   = (config >>  0) & 0xff;
 		if (cache_type > PERF_COUNT_HW_CACHE_MAX)
@@ -127,12 +273,10 @@ char *event_name(int counter)
 		if (cache_result > PERF_COUNT_HW_CACHE_RESULT_MAX)
 			return "unknown-ext-hardware-cache-result";
 
-		sprintf(name, "%s-Cache-%s-%ses",
-			hw_cache[cache_type][0],
-			hw_cache_op[cache_op][0],
-			hw_cache_result[cache_result][0]);
+		if (!is_cache_op_valid(cache_type, cache_op))
+			return "invalid-cache";
 
-		return name;
+		return event_cache_name(cache_type, cache_op, cache_result);
 	}
 
 	case PERF_TYPE_SOFTWARE:
@@ -140,6 +284,9 @@ char *event_name(int counter)
 			return sw_event_names[config];
 		return "unknown-software";
 
+	case PERF_TYPE_TRACEPOINT:
+		return tracepoint_id_to_name(config);
+
 	default:
 		break;
 	}
@@ -147,43 +294,74 @@ char *event_name(int counter)
 	return "unknown";
 }
 
-static int parse_aliases(const char *str, char *names[][MAX_ALIASES], int size)
+static int parse_aliases(const char **str, char *names[][MAX_ALIASES], int size)
 {
 	int i, j;
+	int n, longest = -1;
 
 	for (i = 0; i < size; i++) {
-		for (j = 0; j < MAX_ALIASES; j++) {
-			if (!names[i][j])
-				break;
-			if (strcasestr(str, names[i][j]))
-				return i;
+		for (j = 0; j < MAX_ALIASES && names[i][j]; j++) {
+			n = strlen(names[i][j]);
+			if (n > longest && !strncasecmp(*str, names[i][j], n))
+				longest = n;
+		}
+		if (longest > 0) {
+			*str += longest;
+			return i;
 		}
 	}
 
 	return -1;
 }
 
-static int parse_generic_hw_symbols(const char *str, struct perf_counter_attr *attr)
+static int
+parse_generic_hw_event(const char **str, struct perf_counter_attr *attr)
 {
-	int cache_type = -1, cache_op = 0, cache_result = 0;
+	const char *s = *str;
+	int cache_type = -1, cache_op = -1, cache_result = -1;
 
-	cache_type = parse_aliases(str, hw_cache, PERF_COUNT_HW_CACHE_MAX);
+	cache_type = parse_aliases(&s, hw_cache, PERF_COUNT_HW_CACHE_MAX);
 	/*
 	 * No fallback - if we cannot get a clear cache type
 	 * then bail out:
 	 */
 	if (cache_type == -1)
-		return -EINVAL;
+		return 0;
+
+	while ((cache_op == -1 || cache_result == -1) && *s == '-') {
+		++s;
+
+		if (cache_op == -1) {
+			cache_op = parse_aliases(&s, hw_cache_op,
+						PERF_COUNT_HW_CACHE_OP_MAX);
+			if (cache_op >= 0) {
+				if (!is_cache_op_valid(cache_type, cache_op))
+					return 0;
+				continue;
+			}
+		}
+
+		if (cache_result == -1) {
+			cache_result = parse_aliases(&s, hw_cache_result,
+						PERF_COUNT_HW_CACHE_RESULT_MAX);
+			if (cache_result >= 0)
+				continue;
+		}
+
+		/*
+		 * Can't parse this as a cache op or result, so back up
+		 * to the '-'.
+		 */
+		--s;
+		break;
+	}
 
-	cache_op = parse_aliases(str, hw_cache_op, PERF_COUNT_HW_CACHE_OP_MAX);
 	/*
 	 * Fall back to reads:
 	 */
 	if (cache_op == -1)
 		cache_op = PERF_COUNT_HW_CACHE_OP_READ;
 
-	cache_result = parse_aliases(str, hw_cache_result,
-					PERF_COUNT_HW_CACHE_RESULT_MAX);
 	/*
 	 * Fall back to accesses:
 	 */
@@ -193,82 +371,212 @@ static int parse_generic_hw_symbols(const char *str, struct perf_counter_attr *a
 	attr->config = cache_type | (cache_op << 8) | (cache_result << 16);
 	attr->type = PERF_TYPE_HW_CACHE;
 
-	return 0;
+	*str = s;
+	return 1;
 }
 
-/*
- * Each event can have multiple symbolic names.
- * Symbolic names are (almost) exactly matched.
- */
-static int parse_event_symbols(const char *str, struct perf_counter_attr *attr)
+static int parse_tracepoint_event(const char **strp,
+				    struct perf_counter_attr *attr)
 {
-	u64 config, id;
-	int type;
-	unsigned int i;
-	const char *sep, *pstr;
+	const char *evt_name;
+	char *flags;
+	char sys_name[MAX_EVENT_LENGTH];
+	char id_buf[4];
+	int fd;
+	unsigned int sys_length, evt_length;
+	u64 id;
+	char evt_path[MAXPATHLEN];
+
+	if (valid_debugfs_mount(debugfs_path))
+		return 0;
 
-	if (str[0] == 'r' && hex2u64(str + 1, &config) > 0) {
-		attr->type = PERF_TYPE_RAW;
-		attr->config = config;
+	evt_name = strchr(*strp, ':');
+	if (!evt_name)
+		return 0;
 
+	sys_length = evt_name - *strp;
+	if (sys_length >= MAX_EVENT_LENGTH)
 		return 0;
+
+	strncpy(sys_name, *strp, sys_length);
+	sys_name[sys_length] = '\0';
+	evt_name = evt_name + 1;
+
+	flags = strchr(evt_name, ':');
+	if (flags) {
+		*flags = '\0';
+		flags++;
+		if (!strncmp(flags, "record", strlen(flags)))
+			attr->sample_type |= PERF_SAMPLE_RAW;
 	}
 
-	pstr = str;
-	sep = strchr(pstr, ':');
-	if (sep) {
-		type = atoi(pstr);
-		pstr = sep + 1;
-		id = atoi(pstr);
-		sep = strchr(pstr, ':');
-		if (sep) {
-			pstr = sep + 1;
-			if (strchr(pstr, 'k'))
-				attr->exclude_user = 1;
-			if (strchr(pstr, 'u'))
-				attr->exclude_kernel = 1;
-		}
-		attr->type = type;
-		attr->config = id;
+	evt_length = strlen(evt_name);
+	if (evt_length >= MAX_EVENT_LENGTH)
+		return 0;
 
+	snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", debugfs_path,
+		 sys_name, evt_name);
+	fd = open(evt_path, O_RDONLY);
+	if (fd < 0)
+		return 0;
+
+	if (read(fd, id_buf, sizeof(id_buf)) < 0) {
+		close(fd);
 		return 0;
 	}
+	close(fd);
+	id = atoll(id_buf);
+	attr->config = id;
+	attr->type = PERF_TYPE_TRACEPOINT;
+	*strp = evt_name + evt_length;
+	return 1;
+}
 
-	for (i = 0; i < ARRAY_SIZE(event_symbols); i++) {
-		if (!strncmp(str, event_symbols[i].symbol,
-			     strlen(event_symbols[i].symbol))) {
+static int check_events(const char *str, unsigned int i)
+{
+	int n;
+
+	n = strlen(event_symbols[i].symbol);
+	if (!strncmp(str, event_symbols[i].symbol, n))
+		return n;
+
+	n = strlen(event_symbols[i].alias);
+	if (n)
+		if (!strncmp(str, event_symbols[i].alias, n))
+			return n;
+	return 0;
+}
+
+static int
+parse_symbolic_event(const char **strp, struct perf_counter_attr *attr)
+{
+	const char *str = *strp;
+	unsigned int i;
+	int n;
 
+	for (i = 0; i < ARRAY_SIZE(event_symbols); i++) {
+		n = check_events(str, i);
+		if (n > 0) {
 			attr->type = event_symbols[i].type;
 			attr->config = event_symbols[i].config;
+			*strp = str + n;
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static int parse_raw_event(const char **strp, struct perf_counter_attr *attr)
+{
+	const char *str = *strp;
+	u64 config;
+	int n;
+
+	if (*str != 'r')
+		return 0;
+	n = hex2u64(str + 1, &config);
+	if (n > 0) {
+		*strp = str + n + 1;
+		attr->type = PERF_TYPE_RAW;
+		attr->config = config;
+		return 1;
+	}
+	return 0;
+}
 
-			return 0;
+static int
+parse_numeric_event(const char **strp, struct perf_counter_attr *attr)
+{
+	const char *str = *strp;
+	char *endp;
+	unsigned long type;
+	u64 config;
+
+	type = strtoul(str, &endp, 0);
+	if (endp > str && type < PERF_TYPE_MAX && *endp == ':') {
+		str = endp + 1;
+		config = strtoul(str, &endp, 0);
+		if (endp > str) {
+			attr->type = type;
+			attr->config = config;
+			*strp = endp;
+			return 1;
 		}
 	}
+	return 0;
+}
+
+static int
+parse_event_modifier(const char **strp, struct perf_counter_attr *attr)
+{
+	const char *str = *strp;
+	int eu = 1, ek = 1, eh = 1;
+
+	if (*str++ != ':')
+		return 0;
+	while (*str) {
+		if (*str == 'u')
+			eu = 0;
+		else if (*str == 'k')
+			ek = 0;
+		else if (*str == 'h')
+			eh = 0;
+		else
+			break;
+		++str;
+	}
+	if (str >= *strp + 2) {
+		*strp = str;
+		attr->exclude_user   = eu;
+		attr->exclude_kernel = ek;
+		attr->exclude_hv     = eh;
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * Each event can have multiple symbolic names.
+ * Symbolic names are (almost) exactly matched.
+ */
+static int parse_event_symbols(const char **str, struct perf_counter_attr *attr)
+{
+	if (!(parse_tracepoint_event(str, attr) ||
+	      parse_raw_event(str, attr) ||
+	      parse_numeric_event(str, attr) ||
+	      parse_symbolic_event(str, attr) ||
+	      parse_generic_hw_event(str, attr)))
+		return 0;
 
-	return parse_generic_hw_symbols(str, attr);
+	parse_event_modifier(str, attr);
+
+	return 1;
 }
 
-int parse_events(const struct option *opt, const char *str, int unset)
+int parse_events(const struct option *opt __used, const char *str, int unset __used)
 {
 	struct perf_counter_attr attr;
-	int ret;
 
-	memset(&attr, 0, sizeof(attr));
-again:
-	if (nr_counters == MAX_COUNTERS)
-		return -1;
+	for (;;) {
+		if (nr_counters == MAX_COUNTERS)
+			return -1;
+
+		memset(&attr, 0, sizeof(attr));
+		if (!parse_event_symbols(&str, &attr))
+			return -1;
 
-	ret = parse_event_symbols(str, &attr);
-	if (ret < 0)
-		return ret;
+		if (!(*str == 0 || *str == ',' || isspace(*str)))
+			return -1;
 
-	attrs[nr_counters] = attr;
-	nr_counters++;
+		attrs[nr_counters] = attr;
+		nr_counters++;
 
-	str = strstr(str, ",");
-	if (str) {
-		str++;
-		goto again;
+		if (*str == 0)
+			break;
+		if (*str == ',')
+			++str;
+		while (isspace(*str))
+			++str;
 	}
 
 	return 0;
@@ -283,34 +591,92 @@ static const char * const event_type_descriptors[] = {
 };
 
 /*
+ * Print the events from <debugfs_mount_point>/tracing/events
+ */
+
+static void print_tracepoint_events(void)
+{
+	DIR *sys_dir, *evt_dir;
+	struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
+	struct stat st;
+	char evt_path[MAXPATHLEN];
+
+	if (valid_debugfs_mount(debugfs_path))
+		return;
+
+	sys_dir = opendir(debugfs_path);
+	if (!sys_dir)
+		goto cleanup;
+
+	for_each_subsystem(sys_dir, sys_dirent, sys_next, evt_path, st) {
+		evt_dir = opendir(evt_path);
+		if (!evt_dir)
+			goto cleanup;
+		for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next,
+								evt_path, st) {
+			snprintf(evt_path, MAXPATHLEN, "%s:%s",
+				 sys_dirent.d_name, evt_dirent.d_name);
+			fprintf(stderr, "  %-40s [%s]\n", evt_path,
+				event_type_descriptors[PERF_TYPE_TRACEPOINT+1]);
+		}
+		closedir(evt_dir);
+	}
+
+cleanup:
+	closedir(sys_dir);
+}
+
+/*
  * Print the help text for the event symbols:
  */
 void print_events(void)
 {
 	struct event_symbol *syms = event_symbols;
-	unsigned int i, type, prev_type = -1;
+	unsigned int i, type, op, prev_type = -1;
+	char name[40];
 
 	fprintf(stderr, "\n");
 	fprintf(stderr, "List of pre-defined events (to be used in -e):\n");
 
 	for (i = 0; i < ARRAY_SIZE(event_symbols); i++, syms++) {
 		type = syms->type + 1;
-		if (type > ARRAY_SIZE(event_type_descriptors))
+		if (type >= ARRAY_SIZE(event_type_descriptors))
 			type = 0;
 
 		if (type != prev_type)
 			fprintf(stderr, "\n");
 
-		fprintf(stderr, "  %-30s [%s]\n", syms->symbol,
+		if (strlen(syms->alias))
+			sprintf(name, "%s OR %s", syms->symbol, syms->alias);
+		else
+			strcpy(name, syms->symbol);
+		fprintf(stderr, "  %-40s [%s]\n", name,
 			event_type_descriptors[type]);
 
 		prev_type = type;
 	}
 
 	fprintf(stderr, "\n");
-	fprintf(stderr, "  %-30s [raw hardware event descriptor]\n",
+	for (type = 0; type < PERF_COUNT_HW_CACHE_MAX; type++) {
+		for (op = 0; op < PERF_COUNT_HW_CACHE_OP_MAX; op++) {
+			/* skip invalid cache type */
+			if (!is_cache_op_valid(type, op))
+				continue;
+
+			for (i = 0; i < PERF_COUNT_HW_CACHE_RESULT_MAX; i++) {
+				fprintf(stderr, "  %-40s [%s]\n",
+					event_cache_name(type, op, i),
+					event_type_descriptors[4]);
+			}
+		}
+	}
+
+	fprintf(stderr, "\n");
+	fprintf(stderr, "  %-40s [raw hardware event descriptor]\n",
 		"rNNN");
 	fprintf(stderr, "\n");
 
+	print_tracepoint_events();
+
 	exit(129);
 }
diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h
index e3d552908e6..192a962e3a0 100644
--- a/tools/perf/util/parse-events.h
+++ b/tools/perf/util/parse-events.h
@@ -3,11 +3,14 @@
  * Parse symbolic events/counts passed in as options:
  */
 
+struct option;
+
 extern int			nr_counters;
 
 extern struct perf_counter_attr attrs[MAX_COUNTERS];
 
 extern char *event_name(int ctr);
+extern char *__event_name(int type, u64 config);
 
 extern int parse_events(const struct option *opt, const char *str, int unset);
 
@@ -15,3 +18,6 @@ extern int parse_events(const struct option *opt, const char *str, int unset);
 
 extern void print_events(void);
 
+extern char debugfs_path[];
+extern int valid_debugfs_mount(const char *debugfs);
+
diff --git a/tools/perf/util/parse-options.c b/tools/perf/util/parse-options.c
index b3affb1658d..1bf67190c82 100644
--- a/tools/perf/util/parse-options.c
+++ b/tools/perf/util/parse-options.c
@@ -20,7 +20,8 @@ static int get_arg(struct parse_opt_ctx_t *p, const struct option *opt,
 	if (p->opt) {
 		*arg = p->opt;
 		p->opt = NULL;
-	} else if (p->argc == 1 && (opt->flags & PARSE_OPT_LASTARG_DEFAULT)) {
+	} else if ((opt->flags & PARSE_OPT_LASTARG_DEFAULT) && (p->argc == 1 ||
+		    **(p->argv + 1) == '-')) {
 		*arg = (const char *)opt->defval;
 	} else if (p->argc > 1) {
 		p->argc--;
@@ -485,7 +486,7 @@ int parse_options_usage(const char * const *usagestr,
 }
 
 
-int parse_opt_verbosity_cb(const struct option *opt, const char *arg,
+int parse_opt_verbosity_cb(const struct option *opt, const char *arg __used,
 			   int unset)
 {
 	int *target = opt->value;
diff --git a/tools/perf/util/parse-options.h b/tools/perf/util/parse-options.h
index a1039a6ce0e..8aa3464c709 100644
--- a/tools/perf/util/parse-options.h
+++ b/tools/perf/util/parse-options.h
@@ -90,21 +90,22 @@ struct option {
 	intptr_t defval;
 };
 
-#define OPT_END()                   { OPTION_END }
-#define OPT_ARGUMENT(l, h)          { OPTION_ARGUMENT, 0, (l), NULL, NULL, (h) }
-#define OPT_GROUP(h)                { OPTION_GROUP, 0, NULL, NULL, NULL, (h) }
-#define OPT_BIT(s, l, v, h, b)      { OPTION_BIT, (s), (l), (v), NULL, (h), 0, NULL, (b) }
-#define OPT_BOOLEAN(s, l, v, h)     { OPTION_BOOLEAN, (s), (l), (v), NULL, (h) }
-#define OPT_SET_INT(s, l, v, h, i)  { OPTION_SET_INT, (s), (l), (v), NULL, (h), 0, NULL, (i) }
-#define OPT_SET_PTR(s, l, v, h, p)  { OPTION_SET_PTR, (s), (l), (v), NULL, (h), 0, NULL, (p) }
-#define OPT_INTEGER(s, l, v, h)     { OPTION_INTEGER, (s), (l), (v), NULL, (h) }
-#define OPT_LONG(s, l, v, h)        { OPTION_LONG, (s), (l), (v), NULL, (h) }
-#define OPT_STRING(s, l, v, a, h)   { OPTION_STRING,  (s), (l), (v), (a), (h) }
+#define OPT_END()                   { .type = OPTION_END }
+#define OPT_ARGUMENT(l, h)          { .type = OPTION_ARGUMENT, .long_name = (l), .help = (h) }
+#define OPT_GROUP(h)                { .type = OPTION_GROUP, .help = (h) }
+#define OPT_BIT(s, l, v, h, b)      { .type = OPTION_BIT, .short_name = (s), .long_name = (l), .value = (v), .help = (h), .defval = (b) }
+#define OPT_BOOLEAN(s, l, v, h)     { .type = OPTION_BOOLEAN, .short_name = (s), .long_name = (l), .value = (v), .help = (h) }
+#define OPT_SET_INT(s, l, v, h, i)  { .type = OPTION_SET_INT, .short_name = (s), .long_name = (l), .value = (v), .help = (h), .defval = (i) }
+#define OPT_SET_PTR(s, l, v, h, p)  { .type = OPTION_SET_PTR, .short_name = (s), .long_name = (l), .value = (v), .help = (h), .defval = (p) }
+#define OPT_INTEGER(s, l, v, h)     { .type = OPTION_INTEGER, .short_name = (s), .long_name = (l), .value = (v), .help = (h) }
+#define OPT_LONG(s, l, v, h)        { .type = OPTION_LONG, .short_name = (s), .long_name = (l), .value = (v), .help = (h) }
+#define OPT_STRING(s, l, v, a, h)   { .type = OPTION_STRING,  .short_name = (s), .long_name = (l), .value = (v), (a), .help = (h) }
 #define OPT_DATE(s, l, v, h) \
-	{ OPTION_CALLBACK, (s), (l), (v), "time",(h), 0, \
-	  parse_opt_approxidate_cb }
+	{ .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), .argh = "time", .help = (h), .callback = parse_opt_approxidate_cb }
 #define OPT_CALLBACK(s, l, v, a, h, f) \
-	{ OPTION_CALLBACK, (s), (l), (v), (a), (h), 0, (f) }
+	{ .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), (a), .help = (h), .callback = (f) }
+#define OPT_CALLBACK_DEFAULT(s, l, v, a, h, f, d) \
+	{ .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), (a), .help = (h), .callback = (f), .defval = (intptr_t)d, .flags = PARSE_OPT_LASTARG_DEFAULT }
 
 /* parse_options() will filter out the processed options and leave the
  * non-option argments in argv[].
diff --git a/tools/perf/util/quote.c b/tools/perf/util/quote.c
index f18c5212bc9..2726fe40eb5 100644
--- a/tools/perf/util/quote.c
+++ b/tools/perf/util/quote.c
@@ -162,12 +162,16 @@ static inline int sq_must_quote(char c)
 	return sq_lookup[(unsigned char)c] + quote_path_fully > 0;
 }
 
-/* returns the longest prefix not needing a quote up to maxlen if positive.
-   This stops at the first \0 because it's marked as a character needing an
-   escape */
-static size_t next_quote_pos(const char *s, ssize_t maxlen)
+/*
+ * Returns the longest prefix not needing a quote up to maxlen if
+ * positive.
+ * This stops at the first \0 because it's marked as a character
+ * needing an escape.
+ */
+static ssize_t next_quote_pos(const char *s, ssize_t maxlen)
 {
-	size_t len;
+	ssize_t len;
+
 	if (maxlen < 0) {
 		for (len = 0; !sq_must_quote(s[len]); len++);
 	} else {
@@ -192,22 +196,22 @@ static size_t next_quote_pos(const char *s, ssize_t maxlen)
 static size_t quote_c_style_counted(const char *name, ssize_t maxlen,
                                     struct strbuf *sb, FILE *fp, int no_dq)
 {
-#undef EMIT
-#define EMIT(c)                                 \
-	do {                                        \
-		if (sb) strbuf_addch(sb, (c));          \
-		if (fp) fputc((c), fp);                 \
-		count++;                                \
+#define EMIT(c)							\
+	do {							\
+		if (sb) strbuf_addch(sb, (c));			\
+		if (fp) fputc((c), fp);				\
+		count++;					\
 	} while (0)
-#define EMITBUF(s, l)                           \
-	do {                                        \
-		int __ret;				\
-		if (sb) strbuf_add(sb, (s), (l));       \
-		if (fp) __ret = fwrite((s), (l), 1, fp);        \
-		count += (l);                           \
+
+#define EMITBUF(s, l)						\
+	do {							\
+		int __ret;					\
+		if (sb) strbuf_add(sb, (s), (l));		\
+		if (fp) __ret = fwrite((s), (l), 1, fp);	\
+		count += (l);					\
 	} while (0)
 
-	size_t len, count = 0;
+	ssize_t len, count = 0;
 	const char *p = name;
 
 	for (;;) {
@@ -273,8 +277,8 @@ void write_name_quoted(const char *name, FILE *fp, int terminator)
 	fputc(terminator, fp);
 }
 
-extern void write_name_quotedpfx(const char *pfx, size_t pfxlen,
-                                 const char *name, FILE *fp, int terminator)
+void write_name_quotedpfx(const char *pfx, ssize_t pfxlen,
+			  const char *name, FILE *fp, int terminator)
 {
 	int needquote = 0;
 
@@ -306,7 +310,7 @@ char *quote_path_relative(const char *in, int len,
 		len = strlen(in);
 
 	/* "../" prefix itself does not need quoting, but "in" might. */
-	needquote = next_quote_pos(in, len) < len;
+	needquote = (next_quote_pos(in, len) < len);
 	strbuf_setlen(out, 0);
 	strbuf_grow(out, len);
 
@@ -314,7 +318,7 @@ char *quote_path_relative(const char *in, int len,
 		strbuf_addch(out, '"');
 	if (prefix) {
 		int off = 0;
-		while (prefix[off] && off < len && prefix[off] == in[off])
+		while (off < len && prefix[off] && prefix[off] == in[off])
 			if (prefix[off] == '/') {
 				prefix += off + 1;
 				in += off + 1;
diff --git a/tools/perf/util/quote.h b/tools/perf/util/quote.h
index 5dfad89816d..a5454a1d1c1 100644
--- a/tools/perf/util/quote.h
+++ b/tools/perf/util/quote.h
@@ -53,7 +53,7 @@ extern size_t quote_c_style(const char *name, struct strbuf *, FILE *, int no_dq
 extern void quote_two_c_style(struct strbuf *, const char *, const char *, int);
 
 extern void write_name_quoted(const char *name, FILE *, int terminator);
-extern void write_name_quotedpfx(const char *pfx, size_t pfxlen,
+extern void write_name_quotedpfx(const char *pfx, ssize_t pfxlen,
                                  const char *name, FILE *, int terminator);
 
 /* quote path as relative to the given prefix */
diff --git a/tools/perf/util/rbtree.c b/tools/perf/util/rbtree.c
deleted file mode 100644
index b15ba9c7cb3..00000000000
--- a/tools/perf/util/rbtree.c
+++ /dev/null
@@ -1,383 +0,0 @@
-/*
-  Red Black Trees
-  (C) 1999  Andrea Arcangeli <andrea@suse.de>
-  (C) 2002  David Woodhouse <dwmw2@infradead.org>
-  
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-  linux/lib/rbtree.c
-*/
-
-#include "rbtree.h"
-
-static void __rb_rotate_left(struct rb_node *node, struct rb_root *root)
-{
-	struct rb_node *right = node->rb_right;
-	struct rb_node *parent = rb_parent(node);
-
-	if ((node->rb_right = right->rb_left))
-		rb_set_parent(right->rb_left, node);
-	right->rb_left = node;
-
-	rb_set_parent(right, parent);
-
-	if (parent)
-	{
-		if (node == parent->rb_left)
-			parent->rb_left = right;
-		else
-			parent->rb_right = right;
-	}
-	else
-		root->rb_node = right;
-	rb_set_parent(node, right);
-}
-
-static void __rb_rotate_right(struct rb_node *node, struct rb_root *root)
-{
-	struct rb_node *left = node->rb_left;
-	struct rb_node *parent = rb_parent(node);
-
-	if ((node->rb_left = left->rb_right))
-		rb_set_parent(left->rb_right, node);
-	left->rb_right = node;
-
-	rb_set_parent(left, parent);
-
-	if (parent)
-	{
-		if (node == parent->rb_right)
-			parent->rb_right = left;
-		else
-			parent->rb_left = left;
-	}
-	else
-		root->rb_node = left;
-	rb_set_parent(node, left);
-}
-
-void rb_insert_color(struct rb_node *node, struct rb_root *root)
-{
-	struct rb_node *parent, *gparent;
-
-	while ((parent = rb_parent(node)) && rb_is_red(parent))
-	{
-		gparent = rb_parent(parent);
-
-		if (parent == gparent->rb_left)
-		{
-			{
-				register struct rb_node *uncle = gparent->rb_right;
-				if (uncle && rb_is_red(uncle))
-				{
-					rb_set_black(uncle);
-					rb_set_black(parent);
-					rb_set_red(gparent);
-					node = gparent;
-					continue;
-				}
-			}
-
-			if (parent->rb_right == node)
-			{
-				register struct rb_node *tmp;
-				__rb_rotate_left(parent, root);
-				tmp = parent;
-				parent = node;
-				node = tmp;
-			}
-
-			rb_set_black(parent);
-			rb_set_red(gparent);
-			__rb_rotate_right(gparent, root);
-		} else {
-			{
-				register struct rb_node *uncle = gparent->rb_left;
-				if (uncle && rb_is_red(uncle))
-				{
-					rb_set_black(uncle);
-					rb_set_black(parent);
-					rb_set_red(gparent);
-					node = gparent;
-					continue;
-				}
-			}
-
-			if (parent->rb_left == node)
-			{
-				register struct rb_node *tmp;
-				__rb_rotate_right(parent, root);
-				tmp = parent;
-				parent = node;
-				node = tmp;
-			}
-
-			rb_set_black(parent);
-			rb_set_red(gparent);
-			__rb_rotate_left(gparent, root);
-		}
-	}
-
-	rb_set_black(root->rb_node);
-}
-
-static void __rb_erase_color(struct rb_node *node, struct rb_node *parent,
-			     struct rb_root *root)
-{
-	struct rb_node *other;
-
-	while ((!node || rb_is_black(node)) && node != root->rb_node)
-	{
-		if (parent->rb_left == node)
-		{
-			other = parent->rb_right;
-			if (rb_is_red(other))
-			{
-				rb_set_black(other);
-				rb_set_red(parent);
-				__rb_rotate_left(parent, root);
-				other = parent->rb_right;
-			}
-			if ((!other->rb_left || rb_is_black(other->rb_left)) &&
-			    (!other->rb_right || rb_is_black(other->rb_right)))
-			{
-				rb_set_red(other);
-				node = parent;
-				parent = rb_parent(node);
-			}
-			else
-			{
-				if (!other->rb_right || rb_is_black(other->rb_right))
-				{
-					rb_set_black(other->rb_left);
-					rb_set_red(other);
-					__rb_rotate_right(other, root);
-					other = parent->rb_right;
-				}
-				rb_set_color(other, rb_color(parent));
-				rb_set_black(parent);
-				rb_set_black(other->rb_right);
-				__rb_rotate_left(parent, root);
-				node = root->rb_node;
-				break;
-			}
-		}
-		else
-		{
-			other = parent->rb_left;
-			if (rb_is_red(other))
-			{
-				rb_set_black(other);
-				rb_set_red(parent);
-				__rb_rotate_right(parent, root);
-				other = parent->rb_left;
-			}
-			if ((!other->rb_left || rb_is_black(other->rb_left)) &&
-			    (!other->rb_right || rb_is_black(other->rb_right)))
-			{
-				rb_set_red(other);
-				node = parent;
-				parent = rb_parent(node);
-			}
-			else
-			{
-				if (!other->rb_left || rb_is_black(other->rb_left))
-				{
-					rb_set_black(other->rb_right);
-					rb_set_red(other);
-					__rb_rotate_left(other, root);
-					other = parent->rb_left;
-				}
-				rb_set_color(other, rb_color(parent));
-				rb_set_black(parent);
-				rb_set_black(other->rb_left);
-				__rb_rotate_right(parent, root);
-				node = root->rb_node;
-				break;
-			}
-		}
-	}
-	if (node)
-		rb_set_black(node);
-}
-
-void rb_erase(struct rb_node *node, struct rb_root *root)
-{
-	struct rb_node *child, *parent;
-	int color;
-
-	if (!node->rb_left)
-		child = node->rb_right;
-	else if (!node->rb_right)
-		child = node->rb_left;
-	else
-	{
-		struct rb_node *old = node, *left;
-
-		node = node->rb_right;
-		while ((left = node->rb_left) != NULL)
-			node = left;
-		child = node->rb_right;
-		parent = rb_parent(node);
-		color = rb_color(node);
-
-		if (child)
-			rb_set_parent(child, parent);
-		if (parent == old) {
-			parent->rb_right = child;
-			parent = node;
-		} else
-			parent->rb_left = child;
-
-		node->rb_parent_color = old->rb_parent_color;
-		node->rb_right = old->rb_right;
-		node->rb_left = old->rb_left;
-
-		if (rb_parent(old))
-		{
-			if (rb_parent(old)->rb_left == old)
-				rb_parent(old)->rb_left = node;
-			else
-				rb_parent(old)->rb_right = node;
-		} else
-			root->rb_node = node;
-
-		rb_set_parent(old->rb_left, node);
-		if (old->rb_right)
-			rb_set_parent(old->rb_right, node);
-		goto color;
-	}
-
-	parent = rb_parent(node);
-	color = rb_color(node);
-
-	if (child)
-		rb_set_parent(child, parent);
-	if (parent)
-	{
-		if (parent->rb_left == node)
-			parent->rb_left = child;
-		else
-			parent->rb_right = child;
-	}
-	else
-		root->rb_node = child;
-
- color:
-	if (color == RB_BLACK)
-		__rb_erase_color(child, parent, root);
-}
-
-/*
- * This function returns the first node (in sort order) of the tree.
- */
-struct rb_node *rb_first(const struct rb_root *root)
-{
-	struct rb_node	*n;
-
-	n = root->rb_node;
-	if (!n)
-		return NULL;
-	while (n->rb_left)
-		n = n->rb_left;
-	return n;
-}
-
-struct rb_node *rb_last(const struct rb_root *root)
-{
-	struct rb_node	*n;
-
-	n = root->rb_node;
-	if (!n)
-		return NULL;
-	while (n->rb_right)
-		n = n->rb_right;
-	return n;
-}
-
-struct rb_node *rb_next(const struct rb_node *node)
-{
-	struct rb_node *parent;
-
-	if (rb_parent(node) == node)
-		return NULL;
-
-	/* If we have a right-hand child, go down and then left as far
-	   as we can. */
-	if (node->rb_right) {
-		node = node->rb_right; 
-		while (node->rb_left)
-			node=node->rb_left;
-		return (struct rb_node *)node;
-	}
-
-	/* No right-hand children.  Everything down and left is
-	   smaller than us, so any 'next' node must be in the general
-	   direction of our parent. Go up the tree; any time the
-	   ancestor is a right-hand child of its parent, keep going
-	   up. First time it's a left-hand child of its parent, said
-	   parent is our 'next' node. */
-	while ((parent = rb_parent(node)) && node == parent->rb_right)
-		node = parent;
-
-	return parent;
-}
-
-struct rb_node *rb_prev(const struct rb_node *node)
-{
-	struct rb_node *parent;
-
-	if (rb_parent(node) == node)
-		return NULL;
-
-	/* If we have a left-hand child, go down and then right as far
-	   as we can. */
-	if (node->rb_left) {
-		node = node->rb_left; 
-		while (node->rb_right)
-			node=node->rb_right;
-		return (struct rb_node *)node;
-	}
-
-	/* No left-hand children. Go up till we find an ancestor which
-	   is a right-hand child of its parent */
-	while ((parent = rb_parent(node)) && node == parent->rb_left)
-		node = parent;
-
-	return parent;
-}
-
-void rb_replace_node(struct rb_node *victim, struct rb_node *new,
-		     struct rb_root *root)
-{
-	struct rb_node *parent = rb_parent(victim);
-
-	/* Set the surrounding nodes to point to the replacement */
-	if (parent) {
-		if (victim == parent->rb_left)
-			parent->rb_left = new;
-		else
-			parent->rb_right = new;
-	} else {
-		root->rb_node = new;
-	}
-	if (victim->rb_left)
-		rb_set_parent(victim->rb_left, new);
-	if (victim->rb_right)
-		rb_set_parent(victim->rb_right, new);
-
-	/* Copy the pointers/colour from the victim to the replacement */
-	*new = *victim;
-}
diff --git a/tools/perf/util/rbtree.h b/tools/perf/util/rbtree.h
deleted file mode 100644
index 6bdc488a47f..00000000000
--- a/tools/perf/util/rbtree.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
-  Red Black Trees
-  (C) 1999  Andrea Arcangeli <andrea@suse.de>
-  
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-  linux/include/linux/rbtree.h
-
-  To use rbtrees you'll have to implement your own insert and search cores.
-  This will avoid us to use callbacks and to drop drammatically performances.
-  I know it's not the cleaner way,  but in C (not in C++) to get
-  performances and genericity...
-
-  Some example of insert and search follows here. The search is a plain
-  normal search over an ordered tree. The insert instead must be implemented
-  int two steps: as first thing the code must insert the element in
-  order as a red leaf in the tree, then the support library function
-  rb_insert_color() must be called. Such function will do the
-  not trivial work to rebalance the rbtree if necessary.
-
------------------------------------------------------------------------
-static inline struct page * rb_search_page_cache(struct inode * inode,
-						 unsigned long offset)
-{
-	struct rb_node * n = inode->i_rb_page_cache.rb_node;
-	struct page * page;
-
-	while (n)
-	{
-		page = rb_entry(n, struct page, rb_page_cache);
-
-		if (offset < page->offset)
-			n = n->rb_left;
-		else if (offset > page->offset)
-			n = n->rb_right;
-		else
-			return page;
-	}
-	return NULL;
-}
-
-static inline struct page * __rb_insert_page_cache(struct inode * inode,
-						   unsigned long offset,
-						   struct rb_node * node)
-{
-	struct rb_node ** p = &inode->i_rb_page_cache.rb_node;
-	struct rb_node * parent = NULL;
-	struct page * page;
-
-	while (*p)
-	{
-		parent = *p;
-		page = rb_entry(parent, struct page, rb_page_cache);
-
-		if (offset < page->offset)
-			p = &(*p)->rb_left;
-		else if (offset > page->offset)
-			p = &(*p)->rb_right;
-		else
-			return page;
-	}
-
-	rb_link_node(node, parent, p);
-
-	return NULL;
-}
-
-static inline struct page * rb_insert_page_cache(struct inode * inode,
-						 unsigned long offset,
-						 struct rb_node * node)
-{
-	struct page * ret;
-	if ((ret = __rb_insert_page_cache(inode, offset, node)))
-		goto out;
-	rb_insert_color(node, &inode->i_rb_page_cache);
- out:
-	return ret;
-}
------------------------------------------------------------------------
-*/
-
-#ifndef	_LINUX_RBTREE_H
-#define	_LINUX_RBTREE_H
-
-#include <stddef.h>
-
-/**
- * container_of - cast a member of a structure out to the containing structure
- * @ptr:	the pointer to the member.
- * @type:	the type of the container struct this is embedded in.
- * @member:	the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({			\
-	const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
-	(type *)( (char *)__mptr - offsetof(type,member) );})
-
-struct rb_node
-{
-	unsigned long  rb_parent_color;
-#define	RB_RED		0
-#define	RB_BLACK	1
-	struct rb_node *rb_right;
-	struct rb_node *rb_left;
-} __attribute__((aligned(sizeof(long))));
-    /* The alignment might seem pointless, but allegedly CRIS needs it */
-
-struct rb_root
-{
-	struct rb_node *rb_node;
-};
-
-
-#define rb_parent(r)   ((struct rb_node *)((r)->rb_parent_color & ~3))
-#define rb_color(r)   ((r)->rb_parent_color & 1)
-#define rb_is_red(r)   (!rb_color(r))
-#define rb_is_black(r) rb_color(r)
-#define rb_set_red(r)  do { (r)->rb_parent_color &= ~1; } while (0)
-#define rb_set_black(r)  do { (r)->rb_parent_color |= 1; } while (0)
-
-static inline void rb_set_parent(struct rb_node *rb, struct rb_node *p)
-{
-	rb->rb_parent_color = (rb->rb_parent_color & 3) | (unsigned long)p;
-}
-static inline void rb_set_color(struct rb_node *rb, int color)
-{
-	rb->rb_parent_color = (rb->rb_parent_color & ~1) | color;
-}
-
-#define RB_ROOT	(struct rb_root) { NULL, }
-#define	rb_entry(ptr, type, member) container_of(ptr, type, member)
-
-#define RB_EMPTY_ROOT(root)	((root)->rb_node == NULL)
-#define RB_EMPTY_NODE(node)	(rb_parent(node) == node)
-#define RB_CLEAR_NODE(node)	(rb_set_parent(node, node))
-
-extern void rb_insert_color(struct rb_node *, struct rb_root *);
-extern void rb_erase(struct rb_node *, struct rb_root *);
-
-/* Find logical next and previous nodes in a tree */
-extern struct rb_node *rb_next(const struct rb_node *);
-extern struct rb_node *rb_prev(const struct rb_node *);
-extern struct rb_node *rb_first(const struct rb_root *);
-extern struct rb_node *rb_last(const struct rb_root *);
-
-/* Fast replacement of a single node without remove/rebalance/add/rebalance */
-extern void rb_replace_node(struct rb_node *victim, struct rb_node *new, 
-			    struct rb_root *root);
-
-static inline void rb_link_node(struct rb_node * node, struct rb_node * parent,
-				struct rb_node ** rb_link)
-{
-	node->rb_parent_color = (unsigned long )parent;
-	node->rb_left = node->rb_right = NULL;
-
-	*rb_link = node;
-}
-
-#endif	/* _LINUX_RBTREE_H */
diff --git a/tools/perf/util/run-command.c b/tools/perf/util/run-command.c
index b2f5e854f40..a3935343091 100644
--- a/tools/perf/util/run-command.c
+++ b/tools/perf/util/run-command.c
@@ -65,7 +65,6 @@ int start_command(struct child_process *cmd)
 		cmd->err = fderr[0];
 	}
 
-#ifndef __MINGW32__
 	fflush(NULL);
 	cmd->pid = fork();
 	if (!cmd->pid) {
@@ -118,71 +117,6 @@ int start_command(struct child_process *cmd)
 		}
 		exit(127);
 	}
-#else
-	int s0 = -1, s1 = -1, s2 = -1;	/* backups of stdin, stdout, stderr */
-	const char **sargv = cmd->argv;
-	char **env = environ;
-
-	if (cmd->no_stdin) {
-		s0 = dup(0);
-		dup_devnull(0);
-	} else if (need_in) {
-		s0 = dup(0);
-		dup2(fdin[0], 0);
-	} else if (cmd->in) {
-		s0 = dup(0);
-		dup2(cmd->in, 0);
-	}
-
-	if (cmd->no_stderr) {
-		s2 = dup(2);
-		dup_devnull(2);
-	} else if (need_err) {
-		s2 = dup(2);
-		dup2(fderr[1], 2);
-	}
-
-	if (cmd->no_stdout) {
-		s1 = dup(1);
-		dup_devnull(1);
-	} else if (cmd->stdout_to_stderr) {
-		s1 = dup(1);
-		dup2(2, 1);
-	} else if (need_out) {
-		s1 = dup(1);
-		dup2(fdout[1], 1);
-	} else if (cmd->out > 1) {
-		s1 = dup(1);
-		dup2(cmd->out, 1);
-	}
-
-	if (cmd->dir)
-		die("chdir in start_command() not implemented");
-	if (cmd->env) {
-		env = copy_environ();
-		for (; *cmd->env; cmd->env++)
-			env = env_setenv(env, *cmd->env);
-	}
-
-	if (cmd->perf_cmd) {
-		cmd->argv = prepare_perf_cmd(cmd->argv);
-	}
-
-	cmd->pid = mingw_spawnvpe(cmd->argv[0], cmd->argv, env);
-
-	if (cmd->env)
-		free_environ(env);
-	if (cmd->perf_cmd)
-		free(cmd->argv);
-
-	cmd->argv = sargv;
-	if (s0 >= 0)
-		dup2(s0, 0), close(s0);
-	if (s1 >= 0)
-		dup2(s1, 1), close(s1);
-	if (s2 >= 0)
-		dup2(s2, 2), close(s2);
-#endif
 
 	if (cmd->pid < 0) {
 		int err = errno;
@@ -288,14 +222,6 @@ int run_command_v_opt_cd_env(const char **argv, int opt, const char *dir, const
 	return run_command(&cmd);
 }
 
-#ifdef __MINGW32__
-static __stdcall unsigned run_thread(void *data)
-{
-	struct async *async = data;
-	return async->proc(async->fd_for_proc, async->data);
-}
-#endif
-
 int start_async(struct async *async)
 {
 	int pipe_out[2];
@@ -304,7 +230,6 @@ int start_async(struct async *async)
 		return error("cannot create pipe: %s", strerror(errno));
 	async->out = pipe_out[0];
 
-#ifndef __MINGW32__
 	/* Flush stdio before fork() to avoid cloning buffers */
 	fflush(NULL);
 
@@ -319,33 +244,17 @@ int start_async(struct async *async)
 		exit(!!async->proc(pipe_out[1], async->data));
 	}
 	close(pipe_out[1]);
-#else
-	async->fd_for_proc = pipe_out[1];
-	async->tid = (HANDLE) _beginthreadex(NULL, 0, run_thread, async, 0, NULL);
-	if (!async->tid) {
-		error("cannot create thread: %s", strerror(errno));
-		close_pair(pipe_out);
-		return -1;
-	}
-#endif
+
 	return 0;
 }
 
 int finish_async(struct async *async)
 {
-#ifndef __MINGW32__
 	int ret = 0;
 
 	if (wait_or_whine(async->pid))
 		ret = error("waitpid (async) failed");
-#else
-	DWORD ret = 0;
-	if (WaitForSingleObject(async->tid, INFINITE) != WAIT_OBJECT_0)
-		ret = error("waiting for thread failed: %lu", GetLastError());
-	else if (!GetExitCodeThread(async->tid, &ret))
-		ret = error("cannot get thread exit code: %lu", GetLastError());
-	CloseHandle(async->tid);
-#endif
+
 	return ret;
 }
 
diff --git a/tools/perf/util/run-command.h b/tools/perf/util/run-command.h
index 328289f2366..cc1837deba8 100644
--- a/tools/perf/util/run-command.h
+++ b/tools/perf/util/run-command.h
@@ -79,12 +79,7 @@ struct async {
 	int (*proc)(int fd, void *data);
 	void *data;
 	int out;	/* caller reads from here and closes it */
-#ifndef __MINGW32__
 	pid_t pid;
-#else
-	HANDLE tid;
-	int fd_for_proc;
-#endif
 };
 
 int start_async(struct async *async);
diff --git a/tools/perf/util/strbuf.c b/tools/perf/util/strbuf.c
index eaba0930680..5249d5a1b0c 100644
--- a/tools/perf/util/strbuf.c
+++ b/tools/perf/util/strbuf.c
@@ -16,7 +16,7 @@ int prefixcmp(const char *str, const char *prefix)
  */
 char strbuf_slopbuf[1];
 
-void strbuf_init(struct strbuf *sb, size_t hint)
+void strbuf_init(struct strbuf *sb, ssize_t hint)
 {
 	sb->alloc = sb->len = 0;
 	sb->buf = strbuf_slopbuf;
@@ -92,7 +92,8 @@ void strbuf_ltrim(struct strbuf *sb)
 
 void strbuf_tolower(struct strbuf *sb)
 {
-	int i;
+	unsigned int i;
+
 	for (i = 0; i < sb->len; i++)
 		sb->buf[i] = tolower(sb->buf[i]);
 }
@@ -259,12 +260,12 @@ size_t strbuf_fread(struct strbuf *sb, size_t size, FILE *f)
 	res = fread(sb->buf + sb->len, 1, size, f);
 	if (res > 0)
 		strbuf_setlen(sb, sb->len + res);
-	else if (res < 0 && oldalloc == 0)
+	else if (oldalloc == 0)
 		strbuf_release(sb);
 	return res;
 }
 
-ssize_t strbuf_read(struct strbuf *sb, int fd, size_t hint)
+ssize_t strbuf_read(struct strbuf *sb, int fd, ssize_t hint)
 {
 	size_t oldlen = sb->len;
 	size_t oldalloc = sb->alloc;
@@ -293,7 +294,7 @@ ssize_t strbuf_read(struct strbuf *sb, int fd, size_t hint)
 
 #define STRBUF_MAXLINK (2*PATH_MAX)
 
-int strbuf_readlink(struct strbuf *sb, const char *path, size_t hint)
+int strbuf_readlink(struct strbuf *sb, const char *path, ssize_t hint)
 {
 	size_t oldalloc = sb->alloc;
 
@@ -301,7 +302,7 @@ int strbuf_readlink(struct strbuf *sb, const char *path, size_t hint)
 		hint = 32;
 
 	while (hint < STRBUF_MAXLINK) {
-		int len;
+		ssize_t len;
 
 		strbuf_grow(sb, hint);
 		len = readlink(path, sb->buf, hint);
@@ -343,7 +344,7 @@ int strbuf_getline(struct strbuf *sb, FILE *fp, int term)
 	return 0;
 }
 
-int strbuf_read_file(struct strbuf *sb, const char *path, size_t hint)
+int strbuf_read_file(struct strbuf *sb, const char *path, ssize_t hint)
 {
 	int fd, len;
 
diff --git a/tools/perf/util/strbuf.h b/tools/perf/util/strbuf.h
index 9ee908a3ec5..d2aa86c014c 100644
--- a/tools/perf/util/strbuf.h
+++ b/tools/perf/util/strbuf.h
@@ -50,7 +50,7 @@ struct strbuf {
 #define STRBUF_INIT  { 0, 0, strbuf_slopbuf }
 
 /*----- strbuf life cycle -----*/
-extern void strbuf_init(struct strbuf *, size_t);
+extern void strbuf_init(struct strbuf *buf, ssize_t hint);
 extern void strbuf_release(struct strbuf *);
 extern char *strbuf_detach(struct strbuf *, size_t *);
 extern void strbuf_attach(struct strbuf *, void *, size_t, size_t);
@@ -61,7 +61,7 @@ static inline void strbuf_swap(struct strbuf *a, struct strbuf *b) {
 }
 
 /*----- strbuf size related -----*/
-static inline size_t strbuf_avail(const struct strbuf *sb) {
+static inline ssize_t strbuf_avail(const struct strbuf *sb) {
 	return sb->alloc ? sb->alloc - sb->len - 1 : 0;
 }
 
@@ -122,9 +122,9 @@ extern void strbuf_addf(struct strbuf *sb, const char *fmt, ...);
 
 extern size_t strbuf_fread(struct strbuf *, size_t, FILE *);
 /* XXX: if read fails, any partial read is undone */
-extern ssize_t strbuf_read(struct strbuf *, int fd, size_t hint);
-extern int strbuf_read_file(struct strbuf *sb, const char *path, size_t hint);
-extern int strbuf_readlink(struct strbuf *sb, const char *path, size_t hint);
+extern ssize_t strbuf_read(struct strbuf *, int fd, ssize_t hint);
+extern int strbuf_read_file(struct strbuf *sb, const char *path, ssize_t hint);
+extern int strbuf_readlink(struct strbuf *sb, const char *path, ssize_t hint);
 
 extern int strbuf_getline(struct strbuf *, FILE *, int);
 
diff --git a/tools/perf/util/string.h b/tools/perf/util/string.h
index 37b03255b42..bf39dfadfd2 100644
--- a/tools/perf/util/string.h
+++ b/tools/perf/util/string.h
@@ -1,8 +1,11 @@
 #ifndef _PERF_STRING_H_
 #define _PERF_STRING_H_
 
-#include "../types.h"
+#include "types.h"
 
 int hex2u64(const char *ptr, u64 *val);
 
+#define _STR(x) #x
+#define STR(x) _STR(x)
+
 #endif
diff --git a/tools/perf/util/strlist.c b/tools/perf/util/strlist.c
new file mode 100644
index 00000000000..7ad38171dc2
--- /dev/null
+++ b/tools/perf/util/strlist.c
@@ -0,0 +1,200 @@
+/*
+ * (c) 2009 Arnaldo Carvalho de Melo <acme@redhat.com>
+ *
+ * Licensed under the GPLv2.
+ */
+
+#include "strlist.h"
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+static struct str_node *str_node__new(const char *s, bool dupstr)
+{
+	struct str_node *self = malloc(sizeof(*self));
+
+	if (self != NULL) {
+		if (dupstr) {
+			s = strdup(s);
+			if (s == NULL)
+				goto out_delete;
+		}
+		self->s = s;
+	}
+
+	return self;
+
+out_delete:
+	free(self);
+	return NULL;
+}
+
+static void str_node__delete(struct str_node *self, bool dupstr)
+{
+	if (dupstr)
+		free((void *)self->s);
+	free(self);
+}
+
+int strlist__add(struct strlist *self, const char *new_entry)
+{
+	struct rb_node **p = &self->entries.rb_node;
+	struct rb_node *parent = NULL;
+	struct str_node *sn;
+
+	while (*p != NULL) {
+		int rc;
+
+		parent = *p;
+		sn = rb_entry(parent, struct str_node, rb_node);
+		rc = strcmp(sn->s, new_entry);
+
+		if (rc > 0)
+			p = &(*p)->rb_left;
+		else if (rc < 0)
+			p = &(*p)->rb_right;
+		else
+			return -EEXIST;
+	}
+
+	sn = str_node__new(new_entry, self->dupstr);
+	if (sn == NULL)
+		return -ENOMEM;
+
+	rb_link_node(&sn->rb_node, parent, p);
+	rb_insert_color(&sn->rb_node, &self->entries);
+	++self->nr_entries;
+
+	return 0;
+}
+
+int strlist__load(struct strlist *self, const char *filename)
+{
+	char entry[1024];
+	int err;
+	FILE *fp = fopen(filename, "r");
+
+	if (fp == NULL)
+		return errno;
+
+	while (fgets(entry, sizeof(entry), fp) != NULL) {
+		const size_t len = strlen(entry);
+
+		if (len == 0)
+			continue;
+		entry[len - 1] = '\0';
+
+		err = strlist__add(self, entry);
+		if (err != 0)
+			goto out;
+	}
+
+	err = 0;
+out:
+	fclose(fp);
+	return err;
+}
+
+void strlist__remove(struct strlist *self, struct str_node *sn)
+{
+	rb_erase(&sn->rb_node, &self->entries);
+	str_node__delete(sn, self->dupstr);
+}
+
+bool strlist__has_entry(struct strlist *self, const char *entry)
+{
+	struct rb_node **p = &self->entries.rb_node;
+	struct rb_node *parent = NULL;
+
+	while (*p != NULL) {
+		struct str_node *sn;
+		int rc;
+
+		parent = *p;
+		sn = rb_entry(parent, struct str_node, rb_node);
+		rc = strcmp(sn->s, entry);
+
+		if (rc > 0)
+			p = &(*p)->rb_left;
+		else if (rc < 0)
+			p = &(*p)->rb_right;
+		else
+			return true;
+	}
+
+	return false;
+}
+
+static int strlist__parse_list_entry(struct strlist *self, const char *s)
+{
+	if (strncmp(s, "file://", 7) == 0)
+		return strlist__load(self, s + 7);
+
+	return strlist__add(self, s);
+}
+
+int strlist__parse_list(struct strlist *self, const char *s)
+{
+	char *sep;
+	int err;
+
+	while ((sep = strchr(s, ',')) != NULL) {
+		*sep = '\0';
+		err = strlist__parse_list_entry(self, s);
+		*sep = ',';
+		if (err != 0)
+			return err;
+		s = sep + 1;
+	}
+
+	return *s ? strlist__parse_list_entry(self, s) : 0;
+}
+
+struct strlist *strlist__new(bool dupstr, const char *slist)
+{
+	struct strlist *self = malloc(sizeof(*self));
+
+	if (self != NULL) {
+		self->entries	 = RB_ROOT;
+		self->dupstr	 = dupstr;
+		self->nr_entries = 0;
+		if (slist && strlist__parse_list(self, slist) != 0)
+			goto out_error;
+	}
+
+	return self;
+out_error:
+	free(self);
+	return NULL;
+}
+
+void strlist__delete(struct strlist *self)
+{
+	if (self != NULL) {
+		struct str_node *pos;
+		struct rb_node *next = rb_first(&self->entries);
+
+		while (next) {
+			pos = rb_entry(next, struct str_node, rb_node);
+			next = rb_next(&pos->rb_node);
+			strlist__remove(self, pos);
+		}
+		self->entries = RB_ROOT;
+		free(self);
+	}
+}
+
+struct str_node *strlist__entry(const struct strlist *self, unsigned int idx)
+{
+	struct rb_node *nd;
+
+	for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) {
+		struct str_node *pos = rb_entry(nd, struct str_node, rb_node);
+
+		if (!idx--)
+			return pos;
+	}
+
+	return NULL;
+}
diff --git a/tools/perf/util/strlist.h b/tools/perf/util/strlist.h
new file mode 100644
index 00000000000..921818e44a5
--- /dev/null
+++ b/tools/perf/util/strlist.h
@@ -0,0 +1,39 @@
+#ifndef STRLIST_H_
+#define STRLIST_H_
+
+#include <linux/rbtree.h>
+#include <stdbool.h>
+
+struct str_node {
+	struct rb_node rb_node;
+	const char     *s;
+};
+
+struct strlist {
+	struct rb_root entries;
+	unsigned int   nr_entries;
+	bool	       dupstr;
+};
+
+struct strlist *strlist__new(bool dupstr, const char *slist);
+void strlist__delete(struct strlist *self);
+
+void strlist__remove(struct strlist *self, struct str_node *sn);
+int strlist__load(struct strlist *self, const char *filename);
+int strlist__add(struct strlist *self, const char *str);
+
+struct str_node *strlist__entry(const struct strlist *self, unsigned int idx);
+bool strlist__has_entry(struct strlist *self, const char *entry);
+
+static inline bool strlist__empty(const struct strlist *self)
+{
+	return self->nr_entries == 0;
+}
+
+static inline unsigned int strlist__nr_entries(const struct strlist *self)
+{
+	return self->nr_entries;
+}
+
+int strlist__parse_list(struct strlist *self, const char *s);
+#endif /* STRLIST_H_ */
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 86e14375e74..5c0f42e6b33 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -9,6 +9,16 @@
 
 const char *sym_hist_filter;
 
+enum dso_origin {
+	DSO__ORIG_KERNEL = 0,
+	DSO__ORIG_JAVA_JIT,
+	DSO__ORIG_FEDORA,
+	DSO__ORIG_UBUNTU,
+	DSO__ORIG_BUILDID,
+	DSO__ORIG_DSO,
+	DSO__ORIG_NOT_FOUND,
+};
+
 static struct symbol *symbol__new(u64 start, u64 len,
 				  const char *name, unsigned int priv_size,
 				  u64 obj_start, int verbose)
@@ -35,7 +45,7 @@ static struct symbol *symbol__new(u64 start, u64 len,
 		self = ((void *)self) + priv_size;
 	}
 	self->start = start;
-	self->end   = start + len - 1;
+	self->end   = len ? start + len - 1 : start;
 	memcpy(self->name, name, namelen);
 
 	return self;
@@ -48,8 +58,12 @@ static void symbol__delete(struct symbol *self, unsigned int priv_size)
 
 static size_t symbol__fprintf(struct symbol *self, FILE *fp)
 {
-	return fprintf(fp, " %llx-%llx %s\n",
+	if (!self->module)
+		return fprintf(fp, " %llx-%llx %s\n",
 		       self->start, self->end, self->name);
+	else
+		return fprintf(fp, " %llx-%llx %s \t[%s]\n",
+		       self->start, self->end, self->name, self->module->name);
 }
 
 struct dso *dso__new(const char *name, unsigned int sym_priv_size)
@@ -61,6 +75,8 @@ struct dso *dso__new(const char *name, unsigned int sym_priv_size)
 		self->syms = RB_ROOT;
 		self->sym_priv_size = sym_priv_size;
 		self->find_symbol = dso__find_symbol;
+		self->slen_calculated = 0;
+		self->origin = DSO__ORIG_NOT_FOUND;
 	}
 
 	return self;
@@ -146,6 +162,7 @@ static int dso__load_kallsyms(struct dso *self, symbol_filter_t filter, int verb
 	char *line = NULL;
 	size_t n;
 	FILE *file = fopen("/proc/kallsyms", "r");
+	int count = 0;
 
 	if (file == NULL)
 		goto out_failure;
@@ -188,8 +205,10 @@ static int dso__load_kallsyms(struct dso *self, symbol_filter_t filter, int verb
 
 		if (filter && filter(self, sym))
 			symbol__delete(sym, self->sym_priv_size);
-		else
+		else {
 			dso__insert_symbol(self, sym);
+			count++;
+		}
 	}
 
 	/*
@@ -212,7 +231,7 @@ static int dso__load_kallsyms(struct dso *self, symbol_filter_t filter, int verb
 	free(line);
 	fclose(file);
 
-	return 0;
+	return count;
 
 out_delete_line:
 	free(line);
@@ -307,6 +326,26 @@ static inline int elf_sym__is_function(const GElf_Sym *sym)
 	       sym->st_size != 0;
 }
 
+static inline int elf_sym__is_label(const GElf_Sym *sym)
+{
+	return elf_sym__type(sym) == STT_NOTYPE &&
+		sym->st_name != 0 &&
+		sym->st_shndx != SHN_UNDEF &&
+		sym->st_shndx != SHN_ABS;
+}
+
+static inline const char *elf_sec__name(const GElf_Shdr *shdr,
+					const Elf_Data *secstrs)
+{
+	return secstrs->d_buf + shdr->sh_name;
+}
+
+static inline int elf_sec__is_text(const GElf_Shdr *shdr,
+					const Elf_Data *secstrs)
+{
+	return strstr(elf_sec__name(shdr, secstrs), "text") != NULL;
+}
+
 static inline const char *elf_sym__name(const GElf_Sym *sym,
 					const Elf_Data *symstrs)
 {
@@ -346,36 +385,61 @@ static Elf_Scn *elf_section_by_name(Elf *elf, GElf_Ehdr *ep,
 	     idx < nr_entries; \
 	     ++idx, pos = gelf_getrela(reldata, idx, &pos_mem))
 
-static int dso__synthesize_plt_symbols(struct  dso *self, Elf *elf,
-				       GElf_Ehdr *ehdr, Elf_Scn *scn_dynsym,
-				       GElf_Shdr *shdr_dynsym,
-				       size_t dynsym_idx, int verbose)
+/*
+ * We need to check if we have a .dynsym, so that we can handle the
+ * .plt, synthesizing its symbols, that aren't on the symtabs (be it
+ * .dynsym or .symtab).
+ * And always look at the original dso, not at debuginfo packages, that
+ * have the PLT data stripped out (shdr_rel_plt.sh_type == SHT_NOBITS).
+ */
+static int dso__synthesize_plt_symbols(struct  dso *self, int verbose)
 {
 	uint32_t nr_rel_entries, idx;
 	GElf_Sym sym;
 	u64 plt_offset;
 	GElf_Shdr shdr_plt;
 	struct symbol *f;
-	GElf_Shdr shdr_rel_plt;
+	GElf_Shdr shdr_rel_plt, shdr_dynsym;
 	Elf_Data *reldata, *syms, *symstrs;
-	Elf_Scn *scn_plt_rel, *scn_symstrs;
+	Elf_Scn *scn_plt_rel, *scn_symstrs, *scn_dynsym;
+	size_t dynsym_idx;
+	GElf_Ehdr ehdr;
 	char sympltname[1024];
-	int nr = 0, symidx;
+	Elf *elf;
+	int nr = 0, symidx, fd, err = 0;
 
-	scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt,
+	fd = open(self->name, O_RDONLY);
+	if (fd < 0)
+		goto out;
+
+	elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
+	if (elf == NULL)
+		goto out_close;
+
+	if (gelf_getehdr(elf, &ehdr) == NULL)
+		goto out_elf_end;
+
+	scn_dynsym = elf_section_by_name(elf, &ehdr, &shdr_dynsym,
+					 ".dynsym", &dynsym_idx);
+	if (scn_dynsym == NULL)
+		goto out_elf_end;
+
+	scn_plt_rel = elf_section_by_name(elf, &ehdr, &shdr_rel_plt,
 					  ".rela.plt", NULL);
 	if (scn_plt_rel == NULL) {
-		scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt,
+		scn_plt_rel = elf_section_by_name(elf, &ehdr, &shdr_rel_plt,
 						  ".rel.plt", NULL);
 		if (scn_plt_rel == NULL)
-			return 0;
+			goto out_elf_end;
 	}
 
+	err = -1;
+
 	if (shdr_rel_plt.sh_link != dynsym_idx)
-		return 0;
+		goto out_elf_end;
 
-	if (elf_section_by_name(elf, ehdr, &shdr_plt, ".plt", NULL) == NULL)
-		return 0;
+	if (elf_section_by_name(elf, &ehdr, &shdr_plt, ".plt", NULL) == NULL)
+		goto out_elf_end;
 
 	/*
 	 * Fetch the relocation section to find the indexes to the GOT
@@ -383,19 +447,19 @@ static int dso__synthesize_plt_symbols(struct  dso *self, Elf *elf,
 	 */
 	reldata = elf_getdata(scn_plt_rel, NULL);
 	if (reldata == NULL)
-		return -1;
+		goto out_elf_end;
 
 	syms = elf_getdata(scn_dynsym, NULL);
 	if (syms == NULL)
-		return -1;
+		goto out_elf_end;
 
-	scn_symstrs = elf_getscn(elf, shdr_dynsym->sh_link);
+	scn_symstrs = elf_getscn(elf, shdr_dynsym.sh_link);
 	if (scn_symstrs == NULL)
-		return -1;
+		goto out_elf_end;
 
 	symstrs = elf_getdata(scn_symstrs, NULL);
 	if (symstrs == NULL)
-		return -1;
+		goto out_elf_end;
 
 	nr_rel_entries = shdr_rel_plt.sh_size / shdr_rel_plt.sh_entsize;
 	plt_offset = shdr_plt.sh_offset;
@@ -414,7 +478,7 @@ static int dso__synthesize_plt_symbols(struct  dso *self, Elf *elf,
 			f = symbol__new(plt_offset, shdr_plt.sh_entsize,
 					sympltname, self->sym_priv_size, 0, verbose);
 			if (!f)
-				return -1;
+				goto out_elf_end;
 
 			dso__insert_symbol(self, f);
 			++nr;
@@ -432,25 +496,31 @@ static int dso__synthesize_plt_symbols(struct  dso *self, Elf *elf,
 			f = symbol__new(plt_offset, shdr_plt.sh_entsize,
 					sympltname, self->sym_priv_size, 0, verbose);
 			if (!f)
-				return -1;
+				goto out_elf_end;
 
 			dso__insert_symbol(self, f);
 			++nr;
 		}
-	} else {
-		/*
-		 * TODO: There are still one more shdr_rel_plt.sh_type
-		 * I have to investigate, but probably should be ignored.
-		 */
 	}
 
-	return nr;
+	err = 0;
+out_elf_end:
+	elf_end(elf);
+out_close:
+	close(fd);
+
+	if (err == 0)
+		return nr;
+out:
+	fprintf(stderr, "%s: problems reading %s PLT info.\n",
+		__func__, self->name);
+	return 0;
 }
 
 static int dso__load_sym(struct dso *self, int fd, const char *name,
-			 symbol_filter_t filter, int verbose)
+			 symbol_filter_t filter, int verbose, struct module *mod)
 {
-	Elf_Data *symstrs;
+	Elf_Data *symstrs, *secstrs;
 	uint32_t nr_syms;
 	int err = -1;
 	uint32_t index;
@@ -458,10 +528,9 @@ static int dso__load_sym(struct dso *self, int fd, const char *name,
 	GElf_Shdr shdr;
 	Elf_Data *syms;
 	GElf_Sym sym;
-	Elf_Scn *sec, *sec_dynsym;
+	Elf_Scn *sec, *sec_strndx;
 	Elf *elf;
-	size_t dynsym_idx;
-	int nr = 0;
+	int nr = 0, kernel = !strcmp("[kernel]", self->name);
 
 	elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
 	if (elf == NULL) {
@@ -477,32 +546,11 @@ static int dso__load_sym(struct dso *self, int fd, const char *name,
 		goto out_elf_end;
 	}
 
-	/*
-	 * We need to check if we have a .dynsym, so that we can handle the
-	 * .plt, synthesizing its symbols, that aren't on the symtabs (be it
-	 * .dynsym or .symtab)
-	 */
-	sec_dynsym = elf_section_by_name(elf, &ehdr, &shdr,
-					 ".dynsym", &dynsym_idx);
-	if (sec_dynsym != NULL) {
-		nr = dso__synthesize_plt_symbols(self, elf, &ehdr,
-						 sec_dynsym, &shdr,
-						 dynsym_idx, verbose);
-		if (nr < 0)
-			goto out_elf_end;
-	}
-
-	/*
-	 * But if we have a full .symtab (that is a superset of .dynsym) we
-	 * should add the symbols not in the .dynsyn
-	 */
 	sec = elf_section_by_name(elf, &ehdr, &shdr, ".symtab", NULL);
 	if (sec == NULL) {
-		if (sec_dynsym == NULL)
+		sec = elf_section_by_name(elf, &ehdr, &shdr, ".dynsym", NULL);
+		if (sec == NULL)
 			goto out_elf_end;
-
-		sec = sec_dynsym;
-		gelf_getshdr(sec, &shdr);
 	}
 
 	syms = elf_getdata(sec, NULL);
@@ -517,15 +565,34 @@ static int dso__load_sym(struct dso *self, int fd, const char *name,
 	if (symstrs == NULL)
 		goto out_elf_end;
 
+	sec_strndx = elf_getscn(elf, ehdr.e_shstrndx);
+	if (sec_strndx == NULL)
+		goto out_elf_end;
+
+	secstrs = elf_getdata(sec_strndx, NULL);
+	if (secstrs == NULL)
+		goto out_elf_end;
+
 	nr_syms = shdr.sh_size / shdr.sh_entsize;
 
 	memset(&sym, 0, sizeof(sym));
+	if (!kernel) {
+		self->adjust_symbols = (ehdr.e_type == ET_EXEC ||
+				elf_section_by_name(elf, &ehdr, &shdr,
+						     ".gnu.prelink_undo",
+						     NULL) != NULL);
+	} else self->adjust_symbols = 0;
 
 	elf_symtab__for_each_symbol(syms, nr_syms, index, sym) {
 		struct symbol *f;
+		const char *name;
+		char *demangled;
 		u64 obj_start;
+		struct section *section = NULL;
+		int is_label = elf_sym__is_label(&sym);
+		const char *section_name;
 
-		if (!elf_sym__is_function(&sym))
+		if (!is_label && !elf_sym__is_function(&sym))
 			continue;
 
 		sec = elf_getscn(elf, sym.st_shndx);
@@ -533,19 +600,51 @@ static int dso__load_sym(struct dso *self, int fd, const char *name,
 			goto out_elf_end;
 
 		gelf_getshdr(sec, &shdr);
+
+		if (is_label && !elf_sec__is_text(&shdr, secstrs))
+			continue;
+
+		section_name = elf_sec__name(&shdr, secstrs);
 		obj_start = sym.st_value;
 
-		sym.st_value -= shdr.sh_addr - shdr.sh_offset;
+		if (self->adjust_symbols) {
+			if (verbose >= 2)
+				printf("adjusting symbol: st_value: %Lx sh_addr: %Lx sh_offset: %Lx\n",
+					(u64)sym.st_value, (u64)shdr.sh_addr, (u64)shdr.sh_offset);
+
+			sym.st_value -= shdr.sh_addr - shdr.sh_offset;
+		}
+
+		if (mod) {
+			section = mod->sections->find_section(mod->sections, section_name);
+			if (section)
+				sym.st_value += section->vma;
+			else {
+				fprintf(stderr, "dso__load_sym() module %s lookup of %s failed\n",
+					mod->name, section_name);
+				goto out_elf_end;
+			}
+		}
+		/*
+		 * We need to figure out if the object was created from C++ sources
+		 * DWARF DW_compile_unit has this, but we don't always have access
+		 * to it...
+		 */
+		name = elf_sym__name(&sym, symstrs);
+		demangled = bfd_demangle(NULL, name, DMGL_PARAMS | DMGL_ANSI);
+		if (demangled != NULL)
+			name = demangled;
 
-		f = symbol__new(sym.st_value, sym.st_size,
-				elf_sym__name(&sym, symstrs),
+		f = symbol__new(sym.st_value, sym.st_size, name,
 				self->sym_priv_size, obj_start, verbose);
+		free(demangled);
 		if (!f)
 			goto out_elf_end;
 
 		if (filter && filter(self, f))
 			symbol__delete(f, self->sym_priv_size);
 		else {
+			f->module = mod;
 			dso__insert_symbol(self, f);
 			nr++;
 		}
@@ -558,42 +657,135 @@ out_close:
 	return err;
 }
 
+#define BUILD_ID_SIZE 128
+
+static char *dso__read_build_id(struct dso *self, int verbose)
+{
+	int i;
+	GElf_Ehdr ehdr;
+	GElf_Shdr shdr;
+	Elf_Data *build_id_data;
+	Elf_Scn *sec;
+	char *build_id = NULL, *bid;
+	unsigned char *raw;
+	Elf *elf;
+	int fd = open(self->name, O_RDONLY);
+
+	if (fd < 0)
+		goto out;
+
+	elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
+	if (elf == NULL) {
+		if (verbose)
+			fprintf(stderr, "%s: cannot read %s ELF file.\n",
+				__func__, self->name);
+		goto out_close;
+	}
+
+	if (gelf_getehdr(elf, &ehdr) == NULL) {
+		if (verbose)
+			fprintf(stderr, "%s: cannot get elf header.\n", __func__);
+		goto out_elf_end;
+	}
+
+	sec = elf_section_by_name(elf, &ehdr, &shdr, ".note.gnu.build-id", NULL);
+	if (sec == NULL)
+		goto out_elf_end;
+
+	build_id_data = elf_getdata(sec, NULL);
+	if (build_id_data == NULL)
+		goto out_elf_end;
+	build_id = malloc(BUILD_ID_SIZE);
+	if (build_id == NULL)
+		goto out_elf_end;
+	raw = build_id_data->d_buf + 16;
+	bid = build_id;
+
+	for (i = 0; i < 20; ++i) {
+		sprintf(bid, "%02x", *raw);
+		++raw;
+		bid += 2;
+	}
+	if (verbose >= 2)
+		printf("%s(%s): %s\n", __func__, self->name, build_id);
+out_elf_end:
+	elf_end(elf);
+out_close:
+	close(fd);
+out:
+	return build_id;
+}
+
+char dso__symtab_origin(const struct dso *self)
+{
+	static const char origin[] = {
+		[DSO__ORIG_KERNEL] =   'k',
+		[DSO__ORIG_JAVA_JIT] = 'j',
+		[DSO__ORIG_FEDORA] =   'f',
+		[DSO__ORIG_UBUNTU] =   'u',
+		[DSO__ORIG_BUILDID] =  'b',
+		[DSO__ORIG_DSO] =      'd',
+	};
+
+	if (self == NULL || self->origin == DSO__ORIG_NOT_FOUND)
+		return '!';
+	return origin[self->origin];
+}
+
 int dso__load(struct dso *self, symbol_filter_t filter, int verbose)
 {
-	int size = strlen(self->name) + sizeof("/usr/lib/debug%s.debug");
-	char *name = malloc(size);
-	int variant = 0;
+	int size = PATH_MAX;
+	char *name = malloc(size), *build_id = NULL;
 	int ret = -1;
 	int fd;
 
 	if (!name)
 		return -1;
 
-	if (strncmp(self->name, "/tmp/perf-", 10) == 0)
-		return dso__load_perf_map(self, filter, verbose);
+	self->adjust_symbols = 0;
+
+	if (strncmp(self->name, "/tmp/perf-", 10) == 0) {
+		ret = dso__load_perf_map(self, filter, verbose);
+		self->origin = ret > 0 ? DSO__ORIG_JAVA_JIT :
+					 DSO__ORIG_NOT_FOUND;
+		return ret;
+	}
+
+	self->origin = DSO__ORIG_FEDORA - 1;
 
 more:
 	do {
-		switch (variant) {
-		case 0: /* Fedora */
+		self->origin++;
+		switch (self->origin) {
+		case DSO__ORIG_FEDORA:
 			snprintf(name, size, "/usr/lib/debug%s.debug", self->name);
 			break;
-		case 1: /* Ubuntu */
+		case DSO__ORIG_UBUNTU:
 			snprintf(name, size, "/usr/lib/debug%s", self->name);
 			break;
-		case 2: /* Sane people */
+		case DSO__ORIG_BUILDID:
+			build_id = dso__read_build_id(self, verbose);
+			if (build_id != NULL) {
+				snprintf(name, size,
+					 "/usr/lib/debug/.build-id/%.2s/%s.debug",
+					build_id, build_id + 2);
+				free(build_id);
+				break;
+			}
+			self->origin++;
+			/* Fall thru */
+		case DSO__ORIG_DSO:
 			snprintf(name, size, "%s", self->name);
 			break;
 
 		default:
 			goto out;
 		}
-		variant++;
 
 		fd = open(name, O_RDONLY);
 	} while (fd < 0);
 
-	ret = dso__load_sym(self, fd, name, filter, verbose);
+	ret = dso__load_sym(self, fd, name, filter, verbose, NULL);
 	close(fd);
 
 	/*
@@ -602,11 +794,98 @@ more:
 	if (!ret)
 		goto more;
 
+	if (ret > 0) {
+		int nr_plt = dso__synthesize_plt_symbols(self, verbose);
+		if (nr_plt > 0)
+			ret += nr_plt;
+	}
 out:
 	free(name);
+	if (ret < 0 && strstr(self->name, " (deleted)") != NULL)
+		return 0;
 	return ret;
 }
 
+static int dso__load_module(struct dso *self, struct mod_dso *mods, const char *name,
+			     symbol_filter_t filter, int verbose)
+{
+	struct module *mod = mod_dso__find_module(mods, name);
+	int err = 0, fd;
+
+	if (mod == NULL || !mod->active)
+		return err;
+
+	fd = open(mod->path, O_RDONLY);
+
+	if (fd < 0)
+		return err;
+
+	err = dso__load_sym(self, fd, name, filter, verbose, mod);
+	close(fd);
+
+	return err;
+}
+
+int dso__load_modules(struct dso *self, symbol_filter_t filter, int verbose)
+{
+	struct mod_dso *mods = mod_dso__new_dso("modules");
+	struct module *pos;
+	struct rb_node *next;
+	int err;
+
+	err = mod_dso__load_modules(mods);
+
+	if (err <= 0)
+		return err;
+
+	/*
+	 * Iterate over modules, and load active symbols.
+	 */
+	next = rb_first(&mods->mods);
+	while (next) {
+		pos = rb_entry(next, struct module, rb_node);
+		err = dso__load_module(self, mods, pos->name, filter, verbose);
+
+		if (err < 0)
+			break;
+
+		next = rb_next(&pos->rb_node);
+	}
+
+	if (err < 0) {
+		mod_dso__delete_modules(mods);
+		mod_dso__delete_self(mods);
+	}
+
+	return err;
+}
+
+static inline void dso__fill_symbol_holes(struct dso *self)
+{
+	struct symbol *prev = NULL;
+	struct rb_node *nd;
+
+	for (nd = rb_last(&self->syms); nd; nd = rb_prev(nd)) {
+		struct symbol *pos = rb_entry(nd, struct symbol, rb_node);
+
+		if (prev) {
+			u64 hole = 0;
+			int alias = pos->start == prev->start;
+
+			if (!alias)
+				hole = prev->start - pos->end - 1;
+
+			if (hole || alias) {
+				if (alias)
+					pos->end = prev->end;
+				else if (hole)
+					pos->end = prev->start - 1;
+			}
+		}
+		prev = pos;
+	}
+}
+
 static int dso__load_vmlinux(struct dso *self, const char *vmlinux,
 			     symbol_filter_t filter, int verbose)
 {
@@ -615,23 +894,33 @@ static int dso__load_vmlinux(struct dso *self, const char *vmlinux,
 	if (fd < 0)
 		return -1;
 
-	err = dso__load_sym(self, fd, vmlinux, filter, verbose);
+	err = dso__load_sym(self, fd, vmlinux, filter, verbose, NULL);
+
+	if (err > 0)
+		dso__fill_symbol_holes(self);
+
 	close(fd);
 
 	return err;
 }
 
 int dso__load_kernel(struct dso *self, const char *vmlinux,
-		     symbol_filter_t filter, int verbose)
+		     symbol_filter_t filter, int verbose, int modules)
 {
 	int err = -1;
 
-	if (vmlinux)
+	if (vmlinux) {
 		err = dso__load_vmlinux(self, vmlinux, filter, verbose);
+		if (err > 0 && modules)
+			err = dso__load_modules(self, filter, verbose);
+	}
 
-	if (err)
+	if (err <= 0)
 		err = dso__load_kallsyms(self, filter, verbose);
 
+	if (err > 0)
+		self->origin = DSO__ORIG_KERNEL;
+
 	return err;
 }
 
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index ea332e56e45..b53bf0125c1 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -2,9 +2,34 @@
 #define _PERF_SYMBOL_ 1
 
 #include <linux/types.h>
-#include "../types.h"
-#include "list.h"
-#include "rbtree.h"
+#include "types.h"
+#include <linux/list.h>
+#include <linux/rbtree.h>
+#include "module.h"
+
+#ifdef HAVE_CPLUS_DEMANGLE
+extern char *cplus_demangle(const char *, int);
+
+static inline char *bfd_demangle(void __used *v, const char *c, int i)
+{
+	return cplus_demangle(c, i);
+}
+#else
+#ifdef NO_DEMANGLE
+static inline char *bfd_demangle(void __used *v, const char __used *c,
+				 int __used i)
+{
+	return NULL;
+}
+#else
+#include <bfd.h>
+#endif
+#endif
+
+#ifndef DMGL_PARAMS
+#define DMGL_PARAMS      (1 << 0)       /* Include function args */
+#define DMGL_ANSI        (1 << 1)       /* Include const, volatile, etc */
+#endif
 
 struct symbol {
 	struct rb_node	rb_node;
@@ -13,6 +38,7 @@ struct symbol {
 	u64		obj_start;
 	u64		hist_sum;
 	u64		*hist;
+	struct module	*module;
 	void		*priv;
 	char		name[0];
 };
@@ -20,8 +46,11 @@ struct symbol {
 struct dso {
 	struct list_head node;
 	struct rb_root	 syms;
-	unsigned int	 sym_priv_size;
 	struct symbol    *(*find_symbol)(struct dso *, u64 ip);
+	unsigned int	 sym_priv_size;
+	unsigned char	 adjust_symbols;
+	unsigned char	 slen_calculated;
+	unsigned char	 origin;
 	char		 name[0];
 };
 
@@ -40,10 +69,12 @@ static inline void *dso__sym_priv(struct dso *self, struct symbol *sym)
 struct symbol *dso__find_symbol(struct dso *self, u64 ip);
 
 int dso__load_kernel(struct dso *self, const char *vmlinux,
-		     symbol_filter_t filter, int verbose);
+		     symbol_filter_t filter, int verbose, int modules);
+int dso__load_modules(struct dso *self, symbol_filter_t filter, int verbose);
 int dso__load(struct dso *self, symbol_filter_t filter, int verbose);
 
 size_t dso__fprintf(struct dso *self, FILE *fp);
+char dso__symtab_origin(const struct dso *self);
 
 void symbol__init(void);
 #endif /* _PERF_SYMBOL_ */
diff --git a/tools/perf/types.h b/tools/perf/util/types.h
index 5e75f900594..5e75f900594 100644
--- a/tools/perf/types.h
+++ b/tools/perf/util/types.h
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index b8cfed776d8..68fe157d72f 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -50,6 +50,7 @@
 #include <unistd.h>
 #include <stdio.h>
 #include <sys/stat.h>
+#include <sys/statfs.h>
 #include <fcntl.h>
 #include <stddef.h>
 #include <stdlib.h>
@@ -67,7 +68,6 @@
 #include <assert.h>
 #include <regex.h>
 #include <utime.h>
-#ifndef __MINGW32__
 #include <sys/wait.h>
 #include <sys/poll.h>
 #include <sys/socket.h>
@@ -81,20 +81,7 @@
 #include <netdb.h>
 #include <pwd.h>
 #include <inttypes.h>
-#if defined(__CYGWIN__)
-#undef _XOPEN_SOURCE
-#include <grp.h>
-#define _XOPEN_SOURCE 600
-#include "compat/cygwin.h"
-#else
-#undef _ALL_SOURCE /* AIX 5.3L defines a struct list with _ALL_SOURCE. */
-#include <grp.h>
-#define _ALL_SOURCE 1
-#endif
-#else 	/* __MINGW32__ */
-/* pull in Windows compatibility stuff */
-#include "compat/mingw.h"
-#endif	/* __MINGW32__ */
+#include "../../../include/linux/magic.h"
 
 #ifndef NO_ICONV
 #include <iconv.h>
diff --git a/tools/perf/util/wrapper.c b/tools/perf/util/wrapper.c
index 6350d65f6d9..4574ac28396 100644
--- a/tools/perf/util/wrapper.c
+++ b/tools/perf/util/wrapper.c
@@ -7,7 +7,7 @@
  * There's no pack memory to release - but stay close to the Git
  * version so wrap this away:
  */
-static inline void release_pack_memory(size_t size, int flag)
+static inline void release_pack_memory(size_t size __used, int flag __used)
 {
 }
 
@@ -59,7 +59,8 @@ void *xmemdupz(const void *data, size_t len)
 char *xstrndup(const char *str, size_t len)
 {
 	char *p = memchr(str, '\0', len);
-	return xmemdupz(str, p ? p - str : len);
+
+	return xmemdupz(str, p ? (size_t)(p - str) : len);
 }
 
 void *xrealloc(void *ptr, size_t size)
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index 1eddae94bab..1150c6d5c7b 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -95,8 +95,6 @@ static int ioapic_service(struct kvm_ioapic *ioapic, unsigned int idx)
 		if (injected && pent->fields.trig_mode == IOAPIC_LEVEL_TRIG)
 			pent->fields.remote_irr = 1;
 	}
-	if (!pent->fields.trig_mode)
-		ioapic->irr &= ~(1 << idx);
 
 	return injected;
 }
@@ -136,7 +134,8 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val)
 		mask_after = ioapic->redirtbl[index].fields.mask;
 		if (mask_before != mask_after)
 			kvm_fire_mask_notifiers(ioapic->kvm, index, mask_after);
-		if (ioapic->irr & (1 << index))
+		if (ioapic->redirtbl[index].fields.trig_mode == IOAPIC_LEVEL_TRIG
+		    && ioapic->irr & (1 << index))
 			ioapic_service(ioapic, index);
 		break;
 	}
@@ -184,9 +183,10 @@ int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level)
 		if (!level)
 			ioapic->irr &= ~mask;
 		else {
+			int edge = (entry.fields.trig_mode == IOAPIC_EDGE_TRIG);
 			ioapic->irr |= mask;
-			if ((!entry.fields.trig_mode && old_irr != ioapic->irr)
-			    || !entry.fields.remote_irr)
+			if ((edge && old_irr != ioapic->irr) ||
+			    (!edge && !entry.fields.remote_irr))
 				ret = ioapic_service(ioapic, irq);
 		}
 	}
diff --git a/virt/kvm/irq_comm.c b/virt/kvm/irq_comm.c
index a8bd466d00c..ddc17f0e2f3 100644
--- a/virt/kvm/irq_comm.c
+++ b/virt/kvm/irq_comm.c
@@ -160,7 +160,8 @@ void kvm_notify_acked_irq(struct kvm *kvm, unsigned irqchip, unsigned pin)
 	unsigned gsi = pin;
 
 	list_for_each_entry(e, &kvm->irq_routing, link)
-		if (e->irqchip.irqchip == irqchip &&
+		if (e->type == KVM_IRQ_ROUTING_IRQCHIP &&
+		    e->irqchip.irqchip == irqchip &&
 		    e->irqchip.pin == pin) {
 			gsi = e->gsi;
 			break;
@@ -259,6 +260,7 @@ static int setup_routing_entry(struct kvm_kernel_irq_routing_entry *e,
 	int delta;
 
 	e->gsi = ue->gsi;
+	e->type = ue->type;
 	switch (ue->type) {
 	case KVM_IRQ_ROUTING_IRQCHIP:
 		delta = 0;
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 764554350ed..2884baf1d5f 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -746,6 +746,7 @@ static bool make_all_cpus_request(struct kvm *kvm, unsigned int req)
 		cpumask_clear(cpus);
 
 	me = get_cpu();
+	spin_lock(&kvm->requests_lock);
 	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
 		vcpu = kvm->vcpus[i];
 		if (!vcpu)
@@ -762,6 +763,7 @@ static bool make_all_cpus_request(struct kvm *kvm, unsigned int req)
 		smp_call_function_many(cpus, ack_flush, NULL, 1);
 	else
 		called = false;
+	spin_unlock(&kvm->requests_lock);
 	put_cpu();
 	free_cpumask_var(cpus);
 	return called;
@@ -982,6 +984,7 @@ static struct kvm *kvm_create_vm(void)
 	kvm->mm = current->mm;
 	atomic_inc(&kvm->mm->mm_count);
 	spin_lock_init(&kvm->mmu_lock);
+	spin_lock_init(&kvm->requests_lock);
 	kvm_io_bus_init(&kvm->pio_bus);
 	mutex_init(&kvm->lock);
 	kvm_io_bus_init(&kvm->mmio_bus);
@@ -1194,6 +1197,8 @@ int __kvm_set_memory_region(struct kvm *kvm,
 		if (!new.dirty_bitmap)
 			goto out_free;
 		memset(new.dirty_bitmap, 0, dirty_bytes);
+		if (old.npages)
+			kvm_arch_flush_shadow(kvm);
 	}
 #endif /* not defined CONFIG_S390 */