aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/sh/Makefile1
-rw-r--r--arch/sh/boards/landisk/Makefile7
-rw-r--r--arch/sh/boards/landisk/io.c322
-rw-r--r--arch/sh/boards/landisk/irq.c105
-rw-r--r--arch/sh/boards/landisk/landisk_pwb.c348
-rw-r--r--arch/sh/boards/landisk/rtc.c102
-rw-r--r--arch/sh/boards/landisk/setup.c218
-rw-r--r--arch/sh/configs/landisk_defconfig1373
-rw-r--r--arch/sh/tools/mach-types2
-rw-r--r--include/asm-sh/landisk/gio.h45
-rw-r--r--include/asm-sh/landisk/ide.h14
-rw-r--r--include/asm-sh/landisk/iodata_landisk.h78
12 files changed, 2614 insertions, 1 deletions
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 66cf0ea6d38..e9112def48d 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -105,6 +105,7 @@ machdir-$(CONFIG_SH_RTS7751R2D) := renesas/rts7751r2d
machdir-$(CONFIG_SH_7751_SYSTEMH) := renesas/systemh
machdir-$(CONFIG_SH_EDOSK7705) := renesas/edosk7705
machdir-$(CONFIG_SH_SH4202_MICRODEV) := superh/microdev
+machdir-$(CONFIG_SH_LANDISK) := landisk
machdir-$(CONFIG_SH_UNKNOWN) := unknown
incdir-y := $(notdir $(machdir-y))
diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/landisk/Makefile
new file mode 100644
index 00000000000..60e75c6db0e
--- /dev/null
+++ b/arch/sh/boards/landisk/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for I-O DATA DEVICE, INC. "LANDISK Series"
+#
+
+obj-y := setup.o io.o irq.o rtc.o landisk_pwb.o
+
+obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/sh/boards/landisk/io.c b/arch/sh/boards/landisk/io.c
new file mode 100644
index 00000000000..1f1679af09d
--- /dev/null
+++ b/arch/sh/boards/landisk/io.c
@@ -0,0 +1,322 @@
+/*
+ * arch/sh/boards/landisk/io.c
+ *
+ * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routine for I-O Data Device, Inc. LANDISK.
+ *
+ * Initial version only to support LAN access; some
+ * placeholder code from io_landisk.c left in with the
+ * expectation of later SuperIO and PCMCIA access.
+ */
+/*
+ * modifed by kogiidena
+ * 2005.03.03
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/landisk/iodata_landisk.h>
+#include <asm/addrspace.h>
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include "../../drivers/pci/pci-sh7751.h"
+
+extern void *area5_io_base; /* Area 5 I/O Base address */
+extern void *area6_io_base; /* Area 6 I/O Base address */
+
+/*
+ * The 7751R LANDISK uses the built-in PCI controller (PCIC)
+ * of the 7751R processor, and has a SuperIO accessible via the PCI.
+ * The board also includes a PCMCIA controller on its memory bus,
+ * like the other Solution Engine boards.
+ */
+
+#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
+#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
+#define PCI_IO_AREA SH7751_PCI_IO_BASE
+#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
+
+#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
+
+#define maybebadio(name,port) \
+ printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
+ #name, (port), (__u32) __builtin_return_address(0))
+
+static inline void delay(void)
+{
+ ctrl_inw(0xa0000000);
+}
+
+static inline unsigned long port2adr(unsigned int port)
+{
+ if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
+ if (port == 0x3f6)
+ return ((unsigned long)area5_io_base + 0x2c);
+ else
+ return ((unsigned long)area5_io_base + PA_PIDE_OFFSET +
+ ((port - 0x1f0) << 1));
+ else if ((0x170 <= port && port < 0x178) || port == 0x376)
+ if (port == 0x376)
+ return ((unsigned long)area6_io_base + 0x2c);
+ else
+ return ((unsigned long)area6_io_base + PA_SIDE_OFFSET +
+ ((port - 0x170) << 1));
+ else
+ maybebadio(port2adr, (unsigned long)port);
+
+ return port;
+}
+
+/* In case someone configures the kernel w/o PCI support: in that */
+/* scenario, don't ever bother to check for PCI-window addresses */
+
+/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
+#if defined(CONFIG_PCI)
+#define CHECK_SH7751_PCIIO(port) \
+ ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
+#else
+#define CHECK_SH_7751_PCIIO(port) (0)
+#endif
+
+/*
+ * General outline: remap really low stuff [eventually] to SuperIO,
+ * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
+ * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
+ * should be way beyond the window, and is used w/o translation for
+ * compatibility.
+ */
+unsigned char landisk_inb(unsigned long port)
+{
+ if (PXSEG(port))
+ return *(volatile unsigned char *)port;
+ else if (CHECK_SH7751_PCIIO(port))
+ return *(volatile unsigned char *)PCI_IOMAP(port);
+ else
+ return (*(volatile unsigned short *)port2adr(port) & 0xff);
+}
+
+unsigned char landisk_inb_p(unsigned long port)
+{
+ unsigned char v;
+
+ if (PXSEG(port))
+ v = *(volatile unsigned char *)port;
+ else if (CHECK_SH7751_PCIIO(port))
+ v = *(volatile unsigned char *)PCI_IOMAP(port);
+ else
+ v = (*(volatile unsigned short *)port2adr(port) & 0xff);
+ delay();
+
+ return v;
+}
+
+unsigned short landisk_inw(unsigned long port)
+{
+ if (PXSEG(port))
+ return *(volatile unsigned short *)port;
+ else if (CHECK_SH7751_PCIIO(port))
+ return *(volatile unsigned short *)PCI_IOMAP(port);
+ else
+ maybebadio(inw, port);
+
+ return 0;
+}
+
+unsigned int landisk_inl(unsigned long port)
+{
+ if (PXSEG(port))
+ return *(volatile unsigned long *)port;
+ else if (CHECK_SH7751_PCIIO(port))
+ return *(volatile unsigned long *)PCI_IOMAP(port);
+ else
+ maybebadio(inl, port);
+
+ return 0;
+}
+
+void landisk_outb(unsigned char value, unsigned long port)
+{
+
+ if (PXSEG(port))
+ *(volatile unsigned char *)port = value;
+ else if (CHECK_SH7751_PCIIO(port))
+ *(volatile unsigned char *)PCI_IOMAP(port) = value;
+ else
+ *(volatile unsigned short *)port2adr(port) = value;
+}
+
+void landisk_outb_p(unsigned char value, unsigned long port)
+{
+ if (PXSEG(port))
+ *(volatile unsigned char *)port = value;
+ else if (CHECK_SH7751_PCIIO(port))
+ *(volatile unsigned char *)PCI_IOMAP(port) = value;
+ else
+ *(volatile unsigned short *)port2adr(port) = value;
+ delay();
+}
+
+void landisk_outw(unsigned short value, unsigned long port)
+{
+ if (PXSEG(port))
+ *(volatile unsigned short *)port = value;
+ else if (CHECK_SH7751_PCIIO(port))
+ *(volatile unsigned short *)PCI_IOMAP(port) = value;
+ else
+ maybebadio(outw, port);
+}
+
+void landisk_outl(unsigned int value, unsigned long port)
+{
+ if (PXSEG(port))
+ *(volatile unsigned long *)port = value;
+ else if (CHECK_SH7751_PCIIO(port))
+ *(volatile unsigned long *)PCI_IOMAP(port) = value;
+ else
+ maybebadio(outl, port);
+}
+
+void landisk_insb(unsigned long port, void *addr, unsigned long count)
+{
+ if (PXSEG(port))
+ while (count--)
+ *((unsigned char *)addr)++ =
+ *(volatile unsigned char *)port;
+ else if (CHECK_SH7751_PCIIO(port)) {
+ volatile __u8 *bp = (__u8 *) PCI_IOMAP(port);
+
+ while (count--)
+ *((volatile unsigned char *)addr)++ = *bp;
+ } else {
+ volatile __u16 *p = (volatile unsigned short *)port2adr(port);
+
+ while (count--)
+ *((unsigned char *)addr)++ = *p;
+ }
+}
+
+void landisk_insw(unsigned long port, void *addr, unsigned long count)
+{
+ volatile __u16 *p;
+
+ if (PXSEG(port))
+ p = (volatile unsigned short *)port;
+ else if (CHECK_SH7751_PCIIO(port))
+ p = (volatile unsigned short *)PCI_IOMAP(port);
+ else
+ p = (volatile unsigned short *)port2adr(port);
+ while (count--)
+ *((__u16 *) addr)++ = *p;
+}
+
+void landisk_insl(unsigned long port, void *addr, unsigned long count)
+{
+ if (CHECK_SH7751_PCIIO(port)) {
+ volatile __u32 *p = (__u32 *) PCI_IOMAP(port);
+
+ while (count--)
+ *((__u32 *) addr)++ = *p;
+ } else
+ maybebadio(insl, port);
+}
+
+void landisk_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+ if (PXSEG(port))
+ while (count--)
+ *(volatile unsigned char *)port =
+ *((unsigned char *)addr)++;
+ else if (CHECK_SH7751_PCIIO(port)) {
+ volatile __u8 *bp = (__u8 *) PCI_IOMAP(port);
+
+ while (count--)
+ *bp = *((volatile unsigned char *)addr)++;
+ } else {
+ volatile __u16 *p = (volatile unsigned short *)port2adr(port);
+
+ while (count--)
+ *p = *((unsigned char *)addr)++;
+ }
+}
+
+void landisk_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+ volatile __u16 *p;
+
+ if (PXSEG(port))
+ p = (volatile unsigned short *)port;
+ else if (CHECK_SH7751_PCIIO(port))
+ p = (volatile unsigned short *)PCI_IOMAP(port);
+ else
+ p = (volatile unsigned short *)port2adr(port);
+ while (count--)
+ *p = *((__u16 *) addr)++;
+}
+
+void landisk_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+ if (CHECK_SH7751_PCIIO(port)) {
+ volatile __u32 *p = (__u32 *) PCI_IOMAP(port);
+
+ while (count--)
+ *p = *((__u32 *) addr)++;
+ } else
+ maybebadio(outsl, port);
+}
+
+/* For read/write calls, just copy generic (pass-thru); PCIMBR is */
+/* already set up. For a larger memory space, these would need to */
+/* reset PCIMBR as needed on a per-call basis... */
+
+unsigned char landisk_readb(unsigned long addr)
+{
+ return *(volatile unsigned char *)addr;
+}
+
+unsigned short landisk_readw(unsigned long addr)
+{
+ return *(volatile unsigned short *)addr;
+}
+
+unsigned int landisk_readl(unsigned long addr)
+{
+ return *(volatile unsigned long *)addr;
+}
+
+void landisk_writeb(unsigned char b, unsigned long addr)
+{
+ *(volatile unsigned char *)addr = b;
+}
+
+void landisk_writew(unsigned short b, unsigned long addr)
+{
+ *(volatile unsigned short *)addr = b;
+}
+
+void landisk_writel(unsigned int b, unsigned long addr)
+{
+ *(volatile unsigned long *)addr = b;
+}
+
+void *landisk_ioremap(unsigned long offset, unsigned long size)
+{
+ if (offset >= 0xfd000000)
+ return (void *)offset;
+ else
+ return (void *)P2SEGADDR(offset);
+}
+
+void landisk_iounmap(void *addr)
+{
+}
+
+/* Map ISA bus address to the real address. Only for PCMCIA. */
+
+unsigned long landisk_isa_port2addr(unsigned long offset)
+{
+ return port2adr(offset);
+}
diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c
new file mode 100644
index 00000000000..1dcc3feb7a4
--- /dev/null
+++ b/arch/sh/boards/landisk/irq.c
@@ -0,0 +1,105 @@
+/*
+ * arch/sh/boards/landisk/irq.c
+ *
+ * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routine for I-O Data Device, Inc. LANDISK.
+ *
+ * Initial version only to support LAN access; some
+ * placeholder code from io_landisk.c left in with the
+ * expectation of later SuperIO and PCMCIA access.
+ */
+/*
+ * modified by kogiidena
+ * 2005.03.03
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/landisk/iodata_landisk.h>
+
+static void enable_landisk_irq(unsigned int irq);
+static void disable_landisk_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_landisk_irq disable_landisk_irq
+
+static void ack_landisk_irq(unsigned int irq);
+static void end_landisk_irq(unsigned int irq);
+
+static unsigned int startup_landisk_irq(unsigned int irq)
+{
+ enable_landisk_irq(irq);
+ return 0; /* never anything pending */
+}
+
+static void disable_landisk_irq(unsigned int irq)
+{
+ unsigned long flags;
+ unsigned char val;
+ unsigned char mask = 0xff ^ (0x01 << (irq - 5));
+
+ /* Set the priority in IPR to 0 */
+ local_irq_save(flags);
+ val = ctrl_inb(PA_IMASK);
+ val &= mask;
+ ctrl_outb(val, PA_IMASK);
+ local_irq_restore(flags);
+}
+
+static void enable_landisk_irq(unsigned int irq)
+{
+ unsigned long flags;
+ unsigned char val;
+ unsigned char value = (0x01 << (irq - 5));
+
+ /* Set priority in IPR back to original value */
+ local_irq_save(flags);
+ val = ctrl_inb(PA_IMASK);
+ val |= value;
+ ctrl_outb(val, PA_IMASK);
+ local_irq_restore(flags);
+}
+
+static void ack_landisk_irq(unsigned int irq)
+{
+ disable_landisk_irq(irq);
+}
+
+static void end_landisk_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ enable_landisk_irq(irq);
+}
+
+static struct hw_interrupt_type landisk_irq_type = {
+ .typename = "LANDISK IRQ",
+ .startup = startup_landisk_irq,
+ .shutdown = shutdown_landisk_irq,
+ .enable = enable_landisk_irq,
+ .disable = disable_landisk_irq,
+ .ack = ack_landisk_irq,
+ .end = end_landisk_irq
+};
+
+static void make_landisk_irq(unsigned int irq)
+{
+ disable_irq_nosync(irq);
+ irq_desc[irq].handler = &landisk_irq_type;
+ disable_landisk_irq(irq);
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_landisk_IRQ(void)
+{
+ int i;
+
+ for (i = 5; i < 14; i++)
+ make_landisk_irq(i);
+}
diff --git a/arch/sh/boards/landisk/landisk_pwb.c b/arch/sh/boards/landisk/landisk_pwb.c
new file mode 100644
index 00000000000..e75cb578a28
--- /dev/null
+++ b/arch/sh/boards/landisk/landisk_pwb.c
@@ -0,0 +1,348 @@
+/*
+ * arch/sh/boards/landisk/landisk_pwb.c -- driver for the Power control switch.
+ *
+ * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
+ *
+ * LED control drive function added by kogiidena
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/major.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/landisk/iodata_landisk.h>
+
+#define SHUTDOWN_BTN_MINOR 1 /* Shutdown button device minor no. */
+#define LED_MINOR 21 /* LED minor no. */
+#define BTN_MINOR 22 /* BUTTON minor no. */
+#define GIO_MINOR 40 /* GIO minor no. */
+
+static int openCnt;
+static int openCntLED;
+static int openCntGio;
+static int openCntBtn;
+static int landisk_btn;
+static int landisk_btnctrlpid;
+/*
+ * Functions prototypes
+ */
+
+static int gio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
+ unsigned long arg);
+
+static int swdrv_open(struct inode *inode, struct file *filp)
+{
+ int minor;
+
+ minor = MINOR(inode->i_rdev);
+ filp->private_data = (void *)minor;
+
+ if (minor == SHUTDOWN_BTN_MINOR) {
+ if (openCnt > 0) {
+ return -EALREADY;
+ } else {
+ openCnt++;
+ return 0;
+ }
+ } else if (minor == LED_MINOR) {
+ if (openCntLED > 0) {
+ return -EALREADY;
+ } else {
+ openCntLED++;
+ return 0;
+ }
+ } else if (minor == BTN_MINOR) {
+ if (openCntBtn > 0) {
+ return -EALREADY;
+ } else {
+ openCntBtn++;
+ return 0;
+ }
+ } else if (minor == GIO_MINOR) {
+ if (openCntGio > 0) {
+ return -EALREADY;
+ } else {
+ openCntGio++;
+ return 0;
+ }
+ }
+ return -ENOENT;
+
+}
+
+static int swdrv_close(struct inode *inode, struct file *filp)
+{
+ int minor;
+
+ minor = MINOR(inode->i_rdev);
+ if (minor == SHUTDOWN_BTN_MINOR) {
+ openCnt--;
+ } else if (minor == LED_MINOR) {
+ openCntLED--;
+ } else if (minor == BTN_MINOR) {
+ openCntBtn--;
+ } else if (minor == GIO_MINOR) {
+ openCntGio--;
+ }
+ return 0;
+}
+
+static int swdrv_read(struct file *filp, char *buff, size_t count,
+ loff_t * ppos)
+{
+ int minor;
+ minor = (int)(filp->private_data);
+
+ if (!access_ok(VERIFY_WRITE, (void *)buff, count))
+ return -EFAULT;
+
+ if (minor == SHUTDOWN_BTN_MINOR) {
+ if (landisk_btn & 0x10) {
+ put_user(1, buff);
+ return 1;
+ } else {
+ return 0;
+ }
+ }
+ return 0;
+}
+
+static int swdrv_write(struct file *filp, const char *buff, size_t count,
+ loff_t * ppos)
+{
+ int minor;
+ minor = (int)(filp->private_data);
+
+ if (minor == SHUTDOWN_BTN_MINOR) {
+ return count;
+ }
+ return count;
+}
+
+static irqreturn_t sw_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ landisk_btn = (0x0ff & (~ctrl_inb(PA_STATUS)));
+ disable_irq(IRQ_BUTTON);
+ disable_irq(IRQ_POWER);
+ ctrl_outb(0x00, PA_PWRINT_CLR);
+
+ if (landisk_btnctrlpid != 0) {
+ kill_proc(landisk_btnctrlpid, SIGUSR1, 1);
+ landisk_btnctrlpid = 0;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct file_operations swdrv_fops = {
+ .read = swdrv_read, /* read */
+ .write = swdrv_write, /* write */
+ .open = swdrv_open, /* open */
+ .release = swdrv_close, /* release */
+ .ioctl = gio_ioctl, /* ioctl */
+
+};
+
+static char banner[] __initdata =
+ KERN_INFO "LANDISK and USL-5P Button, LED and GIO driver initialized\n";
+
+int __init swdrv_init(void)
+{
+ int error;
+
+ printk("%s", banner);
+
+ openCnt = 0;
+ openCntLED = 0;
+ openCntBtn = 0;
+ openCntGio = 0;
+ landisk_btn = 0;
+ landisk_btnctrlpid = 0;
+
+ if ((error = register_chrdev(SHUTDOWN_BTN_MAJOR, "swdrv", &swdrv_fops))) {
+ printk(KERN_ERR
+ "Button, LED and GIO driver:Couldn't register driver, error=%d\n",
+ error);
+ return 1;
+ }
+
+ if (request_irq(IRQ_POWER, sw_interrupt, 0, "SHUTDOWNSWITCH", NULL)) {
+ printk(KERN_ERR "Unable to get IRQ 11.\n");
+ return 1;
+ }
+ if (request_irq(IRQ_BUTTON, sw_interrupt, 0, "USL-5P BUTTON", NULL)) {
+ printk(KERN_ERR "Unable to get IRQ 12.\n");
+ return 1;
+ }
+ ctrl_outb(0x00, PA_PWRINT_CLR);
+
+ return 0;
+}
+
+module_init(swdrv_init);
+
+/*
+ * gio driver
+ *
+ */
+
+#include <asm/landisk/gio.h>
+
+static int gio_ioctl(struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ int minor;
+ unsigned int data, mask;
+ static unsigned int addr = 0;
+
+ minor = (int)(filp->private_data);
+
+ /* access control */
+ if (minor == GIO_MINOR) {
+ ;
+ } else if (minor == LED_MINOR) {
+ if (((cmd & 0x0ff) >= 9) && ((cmd & 0x0ff) < 20)) {
+ ;
+ } else {
+ return -EINVAL;
+ }
+ } else if (minor == BTN_MINOR) {
+ if (((cmd & 0x0ff) >= 20) && ((cmd & 0x0ff) < 30)) {
+ ;
+ } else {
+ return -EINVAL;
+ }
+ } else {
+ return -EINVAL;
+ }
+
+ if (cmd & 0x01) { /* write */
+ if (copy_from_user(&data, (int *)arg, sizeof(int))) {
+ return -EFAULT;
+ }
+ }
+
+ switch (cmd) {
+ case GIODRV_IOCSGIOSETADDR: /* addres set */
+ addr = data;
+ break;
+
+ case GIODRV_IOCSGIODATA1: /* write byte */
+ ctrl_outb((unsigned char)(0x0ff & data), addr);
+ break;
+
+ case GIODRV_IOCSGIODATA2: /* write word */
+ if (addr & 0x01) {
+ return -EFAULT;
+ }
+ ctrl_outw((unsigned short int)(0x0ffff & data), addr);
+ break;
+
+ case GIODRV_IOCSGIODATA4: /* write long */
+ if (addr & 0x03) {
+ return -EFAULT;
+ }
+ ctrl_outl(data, addr);
+ break;
+
+ case GIODRV_IOCGGIODATA1: /* read byte */
+ data = ctrl_inb(addr);
+ break;
+
+ case GIODRV_IOCGGIODATA2: /* read word */
+ if (addr & 0x01) {
+ return -EFAULT;
+ }
+ data = ctrl_inw(addr);
+ break;
+
+ case GIODRV_IOCGGIODATA4: /* read long */
+ if (addr & 0x03) {
+ return -EFAULT;
+ }
+ data = ctrl_inl(addr);
+ break;
+ case GIODRV_IOCSGIO_LED: /* write */
+ mask = ((data & 0x00ffffff) << 8)
+ | ((data & 0x0000ffff) << 16)
+ | ((data & 0x000000ff) << 24);
+ landisk_ledparam = data & (~mask);
+ if (landisk_arch == 0) { /* arch == landisk */
+ landisk_ledparam &= 0x03030303;
+ mask = (~(landisk_ledparam >> 22)) & 0x000c;
+ landisk_ledparam |= mask;
+ } else { /* arch == usl-5p */
+ mask = (landisk_ledparam >> 24) & 0x0001;
+ landisk_ledparam |= mask;
+ landisk_ledparam &= 0x007f7f7f;
+ }
+ landisk_ledparam |= 0x80;
+ break;
+ case GIODRV_IOCGGIO_LED: /* read */
+ data = landisk_ledparam;
+ if (landisk_arch == 0) { /* arch == landisk */
+ data &= 0x03030303;
+ } else { /* arch == usl-5p */
+ ;
+ }
+ data &= (~0x080);
+ break;
+ case GIODRV_IOCSGIO_BUZZER: /* write */
+ landisk_buzzerparam = data;
+ landisk_ledparam |= 0x80;
+ break;
+ case GIODRV_IOCGGIO_LANDISK: /* read */
+ data = landisk_arch & 0x01;
+ break;
+ case GIODRV_IOCGGIO_BTN: /* read */
+ data = (0x0ff & ctrl_inb(PA_PWRINT_CLR));
+ data <<= 8;
+ data |= (0x0ff & ctrl_inb(PA_IMASK));
+ data <<= 8;
+ data |= (0x0ff & landisk_btn);
+ data <<= 8;
+ data |= (0x0ff & (~ctrl_inb(PA_STATUS)));
+ break;
+ case GIODRV_IOCSGIO_BTNPID: /* write */
+ landisk_btnctrlpid = data;
+ landisk_btn = 0;
+ if (irq_desc[IRQ_BUTTON].depth) {
+ enable_irq(IRQ_BUTTON);
+ }
+ if (irq_desc[IRQ_POWER].depth) {
+ enable_irq(IRQ_POWER);
+ }
+ break;
+ case GIODRV_IOCGGIO_BTNPID: /* read */
+ data = landisk_btnctrlpid;
+ break;
+ default:
+ return -EFAULT;
+ break;
+ }
+
+ if ((cmd & 0x01) == 0) { /* read */
+ if (copy_to_user((int *)arg, &data, sizeof(int))) {
+ return -EFAULT;
+ }
+ }
+ return 0;
+}
diff --git a/arch/sh/boards/landisk/rtc.c b/arch/sh/boards/landisk/rtc.c
new file mode 100644
index 00000000000..d666aa63303
--- /dev/null
+++ b/arch/sh/boards/landisk/rtc.c
@@ -0,0 +1,102 @@
+/*
+ * arch/sh/boards/landisk/rtc.c -- RTC support
+ *
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ */
+/*
+ * modifed by kogiidena
+ * 2005.09.16
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+
+#ifndef BCD_TO_BIN
+#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
+#endif
+
+#ifndef BIN_TO_BCD
+#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10)
+#endif
+
+extern void (*rtc_get_time) (struct timespec *);
+extern int (*rtc_set_time) (const time_t);
+extern spinlock_t rtc_lock;
+
+extern void
+rs5c313_set_cmos_time(unsigned int BCD_yr, unsigned int BCD_mon,
+ unsigned int BCD_day, unsigned int BCD_hr,
+ unsigned int BCD_min, unsigned int BCD_sec);
+
+extern unsigned long
+rs5c313_get_cmos_time(unsigned int *BCD_yr, unsigned int *BCD_mon,
+ unsigned int *BCD_day, unsigned int *BCD_hr,
+ unsigned int *BCD_min, unsigned int *BCD_sec);
+
+void landisk_rtc_gettimeofday(struct timespec *tv)
+{
+ unsigned int BCD_yr, BCD_mon, BCD_day, BCD_hr, BCD_min, BCD_sec;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+ tv->tv_sec = rs5c313_get_cmos_time
+ (&BCD_yr, &BCD_mon, &BCD_day, &BCD_hr, &BCD_min, &BCD_sec);
+ tv->tv_nsec = 0;
+ spin_unlock_irqrestore(&rtc_lock, flags);
+}
+
+int landisk_rtc_settimeofday(const time_t secs)
+{
+ int retval = 0;
+ int real_seconds, real_minutes, cmos_minutes;
+ unsigned long flags;
+ unsigned long nowtime = secs;
+ unsigned int BCD_yr, BCD_mon, BCD_day, BCD_hr, BCD_min, BCD_sec;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+
+ rs5c313_get_cmos_time
+ (&BCD_yr, &BCD_mon, &BCD_day, &BCD_hr, &BCD_min, &BCD_sec);
+ cmos_minutes = BCD_min;
+ BCD_TO_BIN(cmos_minutes);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
+ real_minutes += 30; /* correct for half hour time zone */
+ real_minutes %= 60;
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ BIN_TO_BCD(real_seconds);
+ BIN_TO_BCD(real_minutes);
+ rs5c313_set_cmos_time(BCD_yr, BCD_mon, BCD_day, BCD_hr,
+ real_minutes, real_seconds);
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_time: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ return retval;
+}
+
+
+void landisk_time_init(void)
+{
+ rtc_get_time = landisk_rtc_gettimeofday;
+ rtc_set_time = landisk_rtc_settimeofday;
+}
diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c
new file mode 100644
index 00000000000..0c60eaa10ba
--- /dev/null
+++ b/arch/sh/boards/landisk/setup.c
@@ -0,0 +1,218 @@
+/*
+ * arch/sh/boards/landisk/setup.c
+ *
+ * Copyright (C) 2002 Paul Mundt
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Setup code for an unknown machine (internal peripherials only)
+ */
+/*
+ * linux/arch/sh/kernel/setup_landisk.c
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ *
+ * I-O DATA Device, Inc. LANDISK Support.
+ *
+ * Modified for LANDISK by
+ * Atom Create Engineering Co., Ltd. 2002.
+ */
+/*
+ * modifed by kogiidena
+ * 2005.09.16
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/pm.h>
+
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/pci.h>
+
+#include <asm/machvec.h>
+#include <asm/rtc.h>
+#include <asm/machvec_init.h>
+#include <asm/io.h>
+#include <asm/landisk/iodata_landisk.h>
+#include <asm/landisk/io.h>
+
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+
+extern void (*board_time_init) (void);
+void landisk_time_init(void);
+extern void init_landisk_IRQ(void);
+
+int landisk_ledparam;
+int landisk_buzzerparam;
+int landisk_arch;
+
+/* defined in mm/ioremap.c */
+extern void *p3_ioremap(unsigned long phys_addr, unsigned long size,
+ unsigned long flags);
+
+/*
+ * Initialize the board
+ */
+
+const char *get_system_type(void)
+{
+ return "LANDISK";
+}
+
+static void landisk_power_off(void)
+{
+ ctrl_outb(0x01, PA_SHUTDOWN);
+}
+
+void check_usl5p(void)
+{
+ volatile unsigned char *p = (volatile unsigned char *)PA_LED;
+ unsigned char tmp1, tmp2;
+ tmp1 = *p;
+ *p = 0x40;
+ tmp2 = *p;
+ *p = tmp1;
+ landisk_arch = (tmp2 == 0x40) ? 1 : 0;
+ if (landisk_arch == 1) { /* arch == usl-5p */
+ landisk_ledparam = 0x00000380;
+ landisk_ledparam |= (tmp1 & 0x07c);
+ } else { /* arch == landisk */
+ landisk_ledparam = 0x02000180;
+ landisk_ledparam |= 0x04;
+ }
+ return;
+}
+
+void __init platform_setup(void)
+{
+
+ landisk_buzzerparam = 0;
+ check_usl5p();
+
+ printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
+ board_time_init = landisk_time_init;
+ pm_power_off = landisk_power_off;
+
+}
+
+void *area5_io_base;
+void *area6_io_base;
+
+int __init cf_init(void)
+{
+ pgprot_t prot;
+ unsigned long paddrbase, psize;
+
+ /* open I/O area window */
+ paddrbase = virt_to_phys((void *)PA_AREA5_IO);
+ psize = PAGE_SIZE;
+ prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+ area5_io_base = p3_ioremap(paddrbase, psize, prot.pgprot);
+ if (!area5_io_base) {
+ printk("allocate_cf_area : can't open CF I/O window!\n");
+ return -ENOMEM;
+ }
+
+ paddrbase = virt_to_phys((void *)PA_AREA6_IO);
+ psize = PAGE_SIZE;
+ prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16);
+ area6_io_base = p3_ioremap(paddrbase, psize, prot.pgprot);
+ if (!area6_io_base) {
+ printk("allocate_cf_area : can't open HDD I/O window!\n");
+ return -ENOMEM;
+ }
+
+ printk(KERN_INFO "Allocate Area5/6 success.\n");
+
+ /* XXX : do we need attribute and common-memory area also? */
+
+ return 0;
+}
+
+__initcall(cf_init);
+
+#include <linux/sched.h>
+
+/* Cycle the LED's in the clasic knightrider/Sun pattern */
+
+void heartbeat_landisk(void)
+{
+ static unsigned int cnt = 0, blink = 0x00, period = 25;
+ volatile unsigned char *p = (volatile unsigned char *)PA_LED;
+ char data;
+
+ if ((landisk_ledparam & 0x080) == 0) {
+ return;
+ }
+ cnt += 1;
+ if (cnt < period) {
+ return;
+ }
+ cnt = 0;
+ blink++;
+
+ data = (blink & 0x01) ? (landisk_ledparam >> 16) : 0;
+ data |= (blink & 0x02) ? (landisk_ledparam >> 8) : 0;
+ data |= landisk_ledparam;
+
+ /* buzzer */
+ if (landisk_buzzerparam & 0x1) {
+ data |= 0x80;
+ } else {
+ data &= 0x7f;
+ }
+ *p = data;
+
+ if (((landisk_ledparam & 0x007f7f00) == 0)
+ && (landisk_buzzerparam == 0)) {
+ landisk_ledparam &= (~0x0080);
+ }
+ landisk_buzzerparam >>= 1;
+}
+
+/*
+ * The Machine Vector
+ */
+
+struct sh_machine_vector mv_landisk __initmv = {
+ .mv_nr_irqs = 72,
+ .mv_inb = landisk_inb,
+ .mv_inw = landisk_inw,
+ .mv_inl = landisk_inl,
+ .mv_outb = landisk_outb,
+ .mv_outw = landisk_outw,
+ .mv_outl = landisk_outl,
+ .mv_inb_p = landisk_inb_p,
+ .mv_inw_p = landisk_inw,
+ .mv_inl_p = landisk_inl,
+ .mv_outb_p = landisk_outb_p,
+ .mv_outw_p = landisk_outw,
+ .mv_outl_p = landisk_outl,
+ .mv_insb = landisk_insb,
+ .mv_insw = landisk_insw,
+ .mv_insl = landisk_insl,
+ .mv_outsb = landisk_outsb,
+ .mv_outsw = landisk_outsw,
+ .mv_outsl = landisk_outsl,
+ .mv_readb = landisk_readb,
+ .mv_readw = landisk_readw,
+ .mv_readl = landisk_readl,
+ .mv_writeb = landisk_writeb,
+ .mv_writew = landisk_writew,
+ .mv_writel = landisk_writel,
+ .mv_ioremap = landisk_ioremap,
+ .mv_iounmap = landisk_iounmap,
+ .mv_isa_port2addr = landisk_isa_port2addr,
+ .mv_init_irq = init_landisk_IRQ,
+
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_landisk,
+#endif
+
+};
+
+ALIAS_MV(landisk)
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
new file mode 100644
index 00000000000..6b43316d03c
--- /dev/null
+++ b/arch/sh/configs/landisk_defconfig
@@ -0,0 +1,1373 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.13-sh
+# Sun Sep 11 13:00:46 2005
+#
+CONFIG_SUPERH=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_IOMAP=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_STB1_HARP is not set
+# CONFIG_SH_STB1_OVERDRIVE is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_CQREEK is not set
+# CONFIG_SH_DMIDA is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_CAT68701 is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_SH2000 is not set
+# CONFIG_SH_ADX is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+CONFIG_SH_LANDISK=y
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+CONFIG_CPU_SUBTYPE_SH7751=y
+CONFIG_CPU_SUBTYPE_SH7751R=y
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ_BOOL=y
+CONFIG_SH_PCLK_FREQ=33333333
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=4
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+CONFIG_HEARTBEAT=y
+
+#
+# Kernel features
+#
+CONFIG_KEXEC=y
+# CONFIG_PREEMPT is not set
+# CONFIG_SMP is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_ISA=y
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+CONFIG_PCI_LEGACY_PROC=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+# CONFIG_IP_NF_MATCH_CONNBYTES is not set
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_TARGET_CONNMARK=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECS is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+CONFIG_BLK_DEV_IDESCSI=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_BLK_DEV_OFFBOARD=y
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+CONFIG_IDEDMA_ONLYDISK=y
+CONFIG_BLK_DEV_AEC62XX=y
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_IDE_SH=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NE2000 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_8139CP=y
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+CONFIG_RS5C313_RTC=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FONT_8x16=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=m
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_CMPCI is not set
+# CONFIG_SOUND_EMU10K1 is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_CS4281 is not set
+# CONFIG_SOUND_ES1370 is not set
+# CONFIG_SOUND_ES1371 is not set
+# CONFIG_SOUND_ESSSOLO1 is not set
+# CONFIG_SOUND_MAESTRO is not set
+# CONFIG_SOUND_MAESTRO3 is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_SONICVIBES is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+# CONFIG_SOUND_ALI5455 is not set
+# CONFIG_SOUND_FORTE is not set
+# CONFIG_SOUND_RME96XX is not set
+# CONFIG_SOUND_AD1980 is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_OBSOLETE_OSS_USB_DRIVER=y
+CONFIG_USB_AUDIO=m
+# CONFIG_USB_BLUETOOTH_TTY is not set
+CONFIG_USB_MIDI=m
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+CONFIG_USB_DABUSB=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_DSBR=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_PWC=m
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+CONFIG_UFS_FS=m
+CONFIG_UFS_FS_WRITE=y
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_FRAME_POINTER is not set
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 182fe909257..c503ca072e1 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -25,4 +25,4 @@ RTS7751R2D SH_RTS7751R2D
EDOSK7705 SH_EDOSK7705
SH4202_MICRODEV SH_SH4202_MICRODEV
SH03 SH_SH03
-
+LANDISK SH_LANDISK
diff --git a/include/asm-sh/landisk/gio.h b/include/asm-sh/landisk/gio.h
new file mode 100644
index 00000000000..3fce4c451a4
--- /dev/null
+++ b/include/asm-sh/landisk/gio.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_SH_LANDISK_GIO_H
+#define __ASM_SH_LANDISK_GIO_H
+
+#include <linux/ioctl.h>
+
+/* version */
+#define VERSION_STR "1.00"
+
+/* Driver name */
+#define GIO_DRIVER_NAME "/dev/giodrv"
+
+/* Use 'k' as magic number */
+#define GIODRV_IOC_MAGIC 'k'
+
+#define GIODRV_IOCRESET _IO(GIODRV_IOC_MAGIC, 0)
+/*
+ * S means "Set" through a ptr,
+ * T means "Tell" directly
+ * G means "Get" (to a pointed var)
+ * Q means "Query", response is on the return value
+ * X means "eXchange": G and S atomically
+ * H means "sHift": T and Q atomically
+ */
+#define GIODRV_IOCSGIODATA1 _IOW(GIODRV_IOC_MAGIC, 1, unsigned char *)
+#define GIODRV_IOCGGIODATA1 _IOR(GIODRV_IOC_MAGIC, 2, unsigned char *)
+#define GIODRV_IOCSGIODATA2 _IOW(GIODRV_IOC_MAGIC, 3, unsigned short *)
+#define GIODRV_IOCGGIODATA2 _IOR(GIODRV_IOC_MAGIC, 4, unsigned short *)
+#define GIODRV_IOCSGIODATA4 _IOW(GIODRV_IOC_MAGIC, 5, unsigned long *)
+#define GIODRV_IOCGGIODATA4 _IOR(GIODRV_IOC_MAGIC, 6, unsigned long *)
+#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC, 7, unsigned long *)
+#define GIODRV_IOCHARDRESET _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */
+
+#define GIODRV_IOCSGIO_LED _IOW(GIODRV_IOC_MAGIC, 9, unsigned long *)
+#define GIODRV_IOCGGIO_LED _IOR(GIODRV_IOC_MAGIC, 10, unsigned long *)
+#define GIODRV_IOCSGIO_BUZZER _IOW(GIODRV_IOC_MAGIC, 11, unsigned long *)
+#define GIODRV_IOCGGIO_LANDISK _IOR(GIODRV_IOC_MAGIC, 14, unsigned long *)
+#define GIODRV_IOCGGIO_BTN _IOR(GIODRV_IOC_MAGIC, 22, unsigned long *)
+#define GIODRV_IOCSGIO_BTNPID _IOW(GIODRV_IOC_MAGIC, 23, unsigned long *)
+#define GIODRV_IOCGGIO_BTNPID _IOR(GIODRV_IOC_MAGIC, 24, unsigned long *)
+
+#define GIODRV_IOC_MAXNR 8
+#define GIO_READ 0x00000000
+#define GIO_WRITE 0x00000001
+
+#endif /* __ASM_SH_LANDISK_GIO_H */
diff --git a/include/asm-sh/landisk/ide.h b/include/asm-sh/landisk/ide.h
new file mode 100644
index 00000000000..6490e28415e
--- /dev/null
+++ b/include/asm-sh/landisk/ide.h
@@ -0,0 +1,14 @@
+/*
+ * modifed by kogiidena
+ * 2005.03.03
+ */
+
+#ifndef __ASM_SH_LANDISK_IDE_H
+#define __ASM_SH_LANDISK_IDE_H
+
+/* Nothing to see here.. */
+#include <asm/landisk/iodata_landisk.h>
+#define IRQ_CFCARD IRQ_FATA /* CF Card IRQ */
+#define IRQ_PCMCIA IRQ_ATA /* PCMCIA IRQ */
+
+#endif /* __ASM_SH_LANDISK_IDE_H */
diff --git a/include/asm-sh/landisk/iodata_landisk.h b/include/asm-sh/landisk/iodata_landisk.h
new file mode 100644
index 00000000000..7189d3a3638
--- /dev/null
+++ b/include/asm-sh/landisk/iodata_landisk.h
@@ -0,0 +1,78 @@
+#ifndef __ASM_SH_IODATA_LANDISK_H
+#define __ASM_SH_IODATA_LANDISK_H
+
+/*
+ * linux/include/asm-sh/landisk/iodata_landisk.h
+ *
+ * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
+ *
+ * IO-DATA LANDISK support
+ */
+
+/* Box specific addresses. */
+
+#define PA_USB 0xa4000000 /* USB Controller M66590 */
+
+#define PA_ATARST 0xb0000000 /* ATA/FATA Access Control Register */
+#define PA_LED 0xb0000001 /* LED Control Register */
+#define PA_STATUS 0xb0000002 /* Switch Status Register */
+#define PA_SHUTDOWN 0xb0000003 /* Shutdown Control Register */
+#define PA_PCIPME 0xb0000004 /* PCI PME Status Register */
+#define PA_IMASK 0xb0000005 /* Interrupt Mask Register */
+/* 2003.10.31 I-O DATA NSD NWG add. for shutdown port clear */
+#define PA_PWRINT_CLR 0xb0000006 /* Shutdown Interrupt clear Register */
+
+#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */
+#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */
+#define PA_LCD_CLRDSP 0x00 /* LCD Clear Display Offset */
+#define PA_LCD_RTNHOME 0x00 /* LCD Return Home Offset */
+#define PA_LCD_ENTMODE 0x00 /* LCD Entry Mode Offset */
+#define PA_LCD_DSPCTL 0x00 /* LCD Display ON/OFF Control Offset */
+#define PA_LCD_FUNC 0x00 /* LCD Function Set Offset */
+#define PA_LCD_CGRAM 0x00 /* LCD Set CGRAM Address Offset */
+#define PA_LCD_DDRAM 0x00 /* LCD Set DDRAM Address Offset */
+#define PA_LCD_RDFLAG 0x01 /* LCD Read Busy Flag Offset */
+#define PA_LCD_WTDATA 0x02 /* LCD Write Datat to RAM Offset */
+#define PA_LCD_RDDATA 0x03 /* LCD Read Data from RAM Offset */
+#define PA_PIDE_OFFSET 0x40 /* CF IDE Offset */
+#define PA_SIDE_OFFSET 0x40 /* HDD IDE Offset */
+
+#define IRQ_PCIINTA 5 /* PCI INTA IRQ */
+#define IRQ_PCIINTB 6 /* PCI INTB IRQ */
+#define IRQ_PCIINDC 7 /* PCI INTC IRQ */
+#define IRQ_PCIINTD 8 /* PCI INTD IRQ */
+#define IRQ_ATA 9 /* ATA IRQ */
+#define IRQ_FATA 10 /* FATA IRQ */
+#define IRQ_POWER 11 /* Power Switch IRQ */
+#define IRQ_BUTTON 12 /* USL-5P Button IRQ */
+#define IRQ_FAULT 13 /* USL-5P Fault IRQ */
+
+#define SHUTDOWN_BTN_MAJOR 99 /* Shutdown button device major no. */
+
+#define SHUTDOWN_LOOP_CNT 5 /* Shutdown button Detection loop */
+#define SHUTDOWN_DELAY 200 /* Shutdown button delay value(ms) */
+
+
+/* added by kogiidena */
+/*
+ * landisk_ledparam
+ *
+ * led ------10 -6543210 -6543210 -6543210
+ * |000000..|0.......|0.......|U.......|
+ * | HARD |fastblik| blink | on |
+ *
+ * led0: power U:update flag
+ * led1: error
+ * led2: usb1
+ * led3: usb2
+ * led4: usb3
+ * led5: usb4
+ * led6: usb5
+ *
+ */
+extern int landisk_ledparam; /* from setup.c */
+extern int landisk_buzzerparam; /* from setup.c */
+extern int landisk_arch; /* from setup.c */
+
+#endif /* __ASM_SH_IODATA_LANDISK_H */
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 01:46:42 +0000