aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/kernel/prom_init.c149
1 files changed, 79 insertions, 70 deletions
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 5d89a21dd0d..5ab4c8466cc 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2142,82 +2142,34 @@ static void __init fixup_device_tree_pmac(void)
#endif
#ifdef CONFIG_PPC_EFIKA
-/* The current fw of the Efika has a device tree needs quite a few
- * fixups to be compliant with the mpc52xx bindings. It's currently
- * unknown if it will ever be compliant (come on bPlan ...) so we do fixups.
- * NOTE that we (barely) tolerate it because the EFIKA was out before
- * the bindings were finished, for any new boards -> RTFM ! */
-
-struct subst_entry {
- char *path;
- char *property;
- void *value;
- int value_len;
-};
-
-static void __init fixup_device_tree_efika(void)
+/*
+ * The MPC5200 FEC driver requires an phy-handle property to tell it how
+ * to talk to the phy. If the phy-handle property is missing, then this
+ * function is called to add the appropriate nodes and link it to the
+ * ethernet node.
+ */
+static void __init fixup_device_tree_efika_add_phy(void)
{
- /* Substitution table */
- #define prop_cstr(x) x, sizeof(x)
- int prop_sound_irq[3] = { 2, 2, 0 };
- int prop_bcomm_irq[3*16] = { 3,0,0, 3,1,0, 3,2,0, 3,3,0,
- 3,4,0, 3,5,0, 3,6,0, 3,7,0,
- 3,8,0, 3,9,0, 3,10,0, 3,11,0,
- 3,12,0, 3,13,0, 3,14,0, 3,15,0 };
- struct subst_entry efika_subst_table[] = {
- { "/", "device_type", prop_cstr("efika") },
- { "/builtin", "device_type", prop_cstr("soc") },
- { "/builtin/ata", "compatible", prop_cstr("mpc5200b-ata\0mpc5200-ata"), },
- { "/builtin/bestcomm", "compatible", prop_cstr("mpc5200b-bestcomm\0mpc5200-bestcomm") },
- { "/builtin/bestcomm", "interrupts", prop_bcomm_irq, sizeof(prop_bcomm_irq) },
- { "/builtin/ethernet", "compatible", prop_cstr("mpc5200b-fec\0mpc5200-fec") },
- { "/builtin/pic", "compatible", prop_cstr("mpc5200b-pic\0mpc5200-pic") },
- { "/builtin/serial", "compatible", prop_cstr("mpc5200b-psc-uart\0mpc5200-psc-uart") },
- { "/builtin/sound", "compatible", prop_cstr("mpc5200b-psc-ac97\0mpc5200-psc-ac97") },
- { "/builtin/sound", "interrupts", prop_sound_irq, sizeof(prop_sound_irq) },
- { "/builtin/sram", "compatible", prop_cstr("mpc5200b-sram\0mpc5200-sram") },
- { "/builtin/sram", "device_type", prop_cstr("sram") },
- {}
- };
- #undef prop_cstr
-
- /* Vars */
u32 node;
char prop[64];
- int rv, i;
+ int rv;
- /* Check if we're really running on a EFIKA */
- node = call_prom("finddevice", 1, 1, ADDR("/"));
+ /* Check if /builtin/ethernet exists - bail if it doesn't */
+ node = call_prom("finddevice", 1, 1, ADDR("/builtin/ethernet"));
if (!PHANDLE_VALID(node))
return;
- rv = prom_getprop(node, "model", prop, sizeof(prop));
- if (rv == PROM_ERROR)
- return;
- if (strcmp(prop, "EFIKA5K2"))
+ /* Check if the phy-handle property exists - bail if it does */
+ rv = prom_getprop(node, "phy-handle", prop, sizeof(prop));
+ if (!rv)
return;
- prom_printf("Applying EFIKA device tree fixups\n");
-
- /* Process substitution table */
- for (i=0; efika_subst_table[i].path; i++) {
- struct subst_entry *se = &efika_subst_table[i];
-
- node = call_prom("finddevice", 1, 1, ADDR(se->path));
- if (!PHANDLE_VALID(node)) {
- prom_printf("fixup_device_tree_efika: ",
- "skipped entry %x - not found\n", i);
- continue;
- }
-
- rv = prom_setprop(node, se->path, se->property,
- se->value, se->value_len );
- if (rv == PROM_ERROR)
- prom_printf("fixup_device_tree_efika: ",
- "skipped entry %x - setprop error\n", i);
- }
+ /*
+ * At this point the ethernet device doesn't have a phy described.
+ * Now we need to add the missing phy node and linkage
+ */
- /* Make sure ethernet mdio bus node exists */
+ /* Check for an MDIO bus node - if missing then create one */
node = call_prom("finddevice", 1, 1, ADDR("/builtin/mdio"));
if (!PHANDLE_VALID(node)) {
prom_printf("Adding Ethernet MDIO node\n");
@@ -2226,8 +2178,8 @@ static void __init fixup_device_tree_efika(void)
" new-device"
" 1 encode-int s\" #address-cells\" property"
" 0 encode-int s\" #size-cells\" property"
- " s\" mdio\" 2dup device-name device-type"
- " s\" mpc5200b-fec-phy\" encode-string"
+ " s\" mdio\" device-name"
+ " s\" fsl,mpc5200b-mdio\" encode-string"
" s\" compatible\" property"
" 0xf0003000 0x400 reg"
" 0x2 encode-int"
@@ -2237,8 +2189,10 @@ static void __init fixup_device_tree_efika(void)
" finish-device");
};
- /* Make sure ethernet phy device node exist */
- node = call_prom("finddevice", 1, 1, ADDR("/builtin/mdio/ethernet-phy"));
+ /* Check for a PHY device node - if missing then create one and
+ * give it's phandle to the ethernet node */
+ node = call_prom("finddevice", 1, 1,
+ ADDR("/builtin/mdio/ethernet-phy"));
if (!PHANDLE_VALID(node)) {
prom_printf("Adding Ethernet PHY node\n");
call_prom("interpret", 1, 1,
@@ -2254,7 +2208,62 @@ static void __init fixup_device_tree_efika(void)
" s\" phy-handle\" property"
" device-end");
}
+}
+
+static void __init fixup_device_tree_efika(void)
+{
+ int sound_irq[3] = { 2, 2, 0 };
+ int bcomm_irq[3*16] = { 3,0,0, 3,1,0, 3,2,0, 3,3,0,
+ 3,4,0, 3,5,0, 3,6,0, 3,7,0,
+ 3,8,0, 3,9,0, 3,10,0, 3,11,0,
+ 3,12,0, 3,13,0, 3,14,0, 3,15,0 };
+ u32 node;
+ char prop[64];
+ int rv, len;
+
+ /* Check if we're really running on a EFIKA */
+ node = call_prom("finddevice", 1, 1, ADDR("/"));
+ if (!PHANDLE_VALID(node))
+ return;
+
+ rv = prom_getprop(node, "model", prop, sizeof(prop));
+ if (rv == PROM_ERROR)
+ return;
+ if (strcmp(prop, "EFIKA5K2"))
+ return;
+
+ prom_printf("Applying EFIKA device tree fixups\n");
+
+ /* Claiming to be 'chrp' is death */
+ node = call_prom("finddevice", 1, 1, ADDR("/"));
+ rv = prom_getprop(node, "device_type", prop, sizeof(prop));
+ if (rv != PROM_ERROR && (strcmp(prop, "chrp") == 0))
+ prom_setprop(node, "/", "device_type", "efika", sizeof("efika"));
+
+ /* Fixup bestcomm interrupts property */
+ node = call_prom("finddevice", 1, 1, ADDR("/builtin/bestcomm"));
+ if (PHANDLE_VALID(node)) {
+ len = prom_getproplen(node, "interrupts");
+ if (len == 12) {
+ prom_printf("Fixing bestcomm interrupts property\n");
+ prom_setprop(node, "/builtin/bestcom", "interrupts",
+ bcomm_irq, sizeof(bcomm_irq));
+ }
+ }
+
+ /* Fixup sound interrupts property */
+ node = call_prom("finddevice", 1, 1, ADDR("/builtin/sound"));
+ if (PHANDLE_VALID(node)) {
+ rv = prom_getprop(node, "interrupts", prop, sizeof(prop));
+ if (rv == PROM_ERROR) {
+ prom_printf("Adding sound interrupts property\n");
+ prom_setprop(node, "/builtin/sound", "interrupts",
+ sound_irq, sizeof(sound_irq));
+ }
+ }
+ /* Make sure ethernet phy-handle property exists */
+ fixup_device_tree_efika_add_phy();
}
#else
#define fixup_device_tree_efika()