diff options
| -rw-r--r-- | drivers/char/stallion.c | 222 |
1 files changed, 91 insertions, 131 deletions
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index c476da100b0..a547c0c8fb2 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -450,51 +450,11 @@ static unsigned int stl_baudrates[] = { * Declare all those functions in this driver! */ -static void stl_argbrds(void); -static int stl_parsebrd(struct stlconf *confp, char **argp); - -static unsigned long stl_atol(char *str); - -static int stl_open(struct tty_struct *tty, struct file *filp); -static void stl_close(struct tty_struct *tty, struct file *filp); -static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count); -static void stl_putchar(struct tty_struct *tty, unsigned char ch); -static void stl_flushchars(struct tty_struct *tty); -static int stl_writeroom(struct tty_struct *tty); -static int stl_charsinbuffer(struct tty_struct *tty); -static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); -static void stl_settermios(struct tty_struct *tty, struct termios *old); -static void stl_throttle(struct tty_struct *tty); -static void stl_unthrottle(struct tty_struct *tty); -static void stl_stop(struct tty_struct *tty); -static void stl_start(struct tty_struct *tty); -static void stl_flushbuffer(struct tty_struct *tty); -static void stl_breakctl(struct tty_struct *tty, int state); -static void stl_waituntilsent(struct tty_struct *tty, int timeout); -static void stl_sendxchar(struct tty_struct *tty, char ch); -static void stl_hangup(struct tty_struct *tty); static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg); -static int stl_portinfo(struct stlport *portp, int portnr, char *pos); -static int stl_readproc(char *page, char **start, off_t off, int count, int *eof, void *data); - static int stl_brdinit(struct stlbrd *brdp); -static int stl_initports(struct stlbrd *brdp, struct stlpanel *panelp); -static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp); -static int stl_setserial(struct stlport *portp, struct serial_struct __user *sp); -static int stl_getbrdstats(combrd_t __user *bp); static int stl_getportstats(struct stlport *portp, comstats_t __user *cp); static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp); -static int stl_getportstruct(struct stlport __user *arg); -static int stl_getbrdstruct(struct stlbrd __user *arg); static int stl_waitcarrier(struct stlport *portp, struct file *filp); -static int stl_eiointr(struct stlbrd *brdp); -static int stl_echatintr(struct stlbrd *brdp); -static int stl_echmcaintr(struct stlbrd *brdp); -static int stl_echpciintr(struct stlbrd *brdp); -static int stl_echpci64intr(struct stlbrd *brdp); -static void stl_offintr(struct work_struct *); -static struct stlbrd *stl_allocbrd(void); -static struct stlport *stl_getport(int brdnr, int panelnr, int portnr); /* * CD1400 uart specific handling functions. @@ -700,31 +660,6 @@ static struct class *stallion_class; * Check for any arguments passed in on the module load command line. */ -static void __init stl_argbrds(void) -{ - struct stlconf conf; - struct stlbrd *brdp; - int i; - - pr_debug("stl_argbrds()\n"); - - for (i = stl_nrbrds; (i < stl_nargs); i++) { - memset(&conf, 0, sizeof(conf)); - if (stl_parsebrd(&conf, stl_brdsp[i]) == 0) - continue; - if ((brdp = stl_allocbrd()) == NULL) - continue; - stl_nrbrds = i + 1; - brdp->brdnr = i; - brdp->brdtype = conf.brdtype; - brdp->ioaddr1 = conf.ioaddr1; - brdp->ioaddr2 = conf.ioaddr2; - brdp->irq = conf.irq; - brdp->irqtype = conf.irqtype; - stl_brdinit(brdp); - } -} - /*****************************************************************************/ /* @@ -826,6 +761,31 @@ static struct stlbrd *stl_allocbrd(void) return brdp; } +static void __init stl_argbrds(void) +{ + struct stlconf conf; + struct stlbrd *brdp; + int i; + + pr_debug("stl_argbrds()\n"); + + for (i = stl_nrbrds; (i < stl_nargs); i++) { + memset(&conf, 0, sizeof(conf)); + if (stl_parsebrd(&conf, stl_brdsp[i]) == 0) + continue; + if ((brdp = stl_allocbrd()) == NULL) + continue; + stl_nrbrds = i + 1; + brdp->brdnr = i; + brdp->brdtype = conf.brdtype; + brdp->ioaddr1 = conf.ioaddr1; + brdp->ioaddr2 = conf.ioaddr2; + brdp->irq = conf.irq; + brdp->irqtype = conf.irqtype; + stl_brdinit(brdp); + } +} + /*****************************************************************************/ static int stl_open(struct tty_struct *tty, struct file *filp) @@ -972,6 +932,52 @@ static int stl_waitcarrier(struct stlport *portp, struct file *filp) /*****************************************************************************/ +static void stl_flushbuffer(struct tty_struct *tty) +{ + struct stlport *portp; + + pr_debug("stl_flushbuffer(tty=%p)\n", tty); + + if (tty == NULL) + return; + portp = tty->driver_data; + if (portp == NULL) + return; + + stl_flush(portp); + tty_wakeup(tty); +} + +/*****************************************************************************/ + +static void stl_waituntilsent(struct tty_struct *tty, int timeout) +{ + struct stlport *portp; + unsigned long tend; + + pr_debug("stl_waituntilsent(tty=%p,timeout=%d)\n", tty, timeout); + + if (tty == NULL) + return; + portp = tty->driver_data; + if (portp == NULL) + return; + + if (timeout == 0) + timeout = HZ; + tend = jiffies + timeout; + + while (stl_datastate(portp)) { + if (signal_pending(current)) + break; + msleep_interruptible(20); + if (time_after_eq(jiffies, tend)) + break; + } +} + +/*****************************************************************************/ + static void stl_close(struct tty_struct *tty, struct file *filp) { struct stlport *portp; @@ -1401,6 +1407,26 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd /*****************************************************************************/ +/* + * Start the transmitter again. Just turn TX interrupts back on. + */ + +static void stl_start(struct tty_struct *tty) +{ + struct stlport *portp; + + pr_debug("stl_start(tty=%p)\n", tty); + + if (tty == NULL) + return; + portp = tty->driver_data; + if (portp == NULL) + return; + stl_startrxtx(portp, -1, 1); +} + +/*****************************************************************************/ + static void stl_settermios(struct tty_struct *tty, struct termios *old) { struct stlport *portp; @@ -1495,26 +1521,6 @@ static void stl_stop(struct tty_struct *tty) /*****************************************************************************/ /* - * Start the transmitter again. Just turn TX interrupts back on. - */ - -static void stl_start(struct tty_struct *tty) -{ - struct stlport *portp; - - pr_debug("stl_start(tty=%p)\n", tty); - - if (tty == NULL) - return; - portp = tty->driver_data; - if (portp == NULL) - return; - stl_startrxtx(portp, -1, 1); -} - -/*****************************************************************************/ - -/* * Hangup this port. This is pretty much like closing the port, only * a little more brutal. No waiting for data to drain. Shutdown the * port and maybe drop signals. @@ -1554,24 +1560,6 @@ static void stl_hangup(struct tty_struct *tty) /*****************************************************************************/ -static void stl_flushbuffer(struct tty_struct *tty) -{ - struct stlport *portp; - - pr_debug("stl_flushbuffer(tty=%p)\n", tty); - - if (tty == NULL) - return; - portp = tty->driver_data; - if (portp == NULL) - return; - - stl_flush(portp); - tty_wakeup(tty); -} - -/*****************************************************************************/ - static void stl_breakctl(struct tty_struct *tty, int state) { struct stlport *portp; @@ -1589,34 +1577,6 @@ static void stl_breakctl(struct tty_struct *tty, int state) /*****************************************************************************/ -static void stl_waituntilsent(struct tty_struct *tty, int timeout) -{ - struct stlport *portp; - unsigned long tend; - - pr_debug("stl_waituntilsent(tty=%p,timeout=%d)\n", tty, timeout); - - if (tty == NULL) - return; - portp = tty->driver_data; - if (portp == NULL) - return; - - if (timeout == 0) - timeout = HZ; - tend = jiffies + timeout; - - while (stl_datastate(portp)) { - if (signal_pending(current)) - break; - msleep_interruptible(20); - if (time_after_eq(jiffies, tend)) - break; - } -} - -/*****************************************************************************/ - static void stl_sendxchar(struct tty_struct *tty, char ch) { struct stlport *portp; |