diff options
| -rw-r--r-- | Documentation/DocBook/libata.tmpl | 96 | ||||
| -rw-r--r-- | drivers/block/cciss.c | 1 | ||||
| -rw-r--r-- | drivers/block/ll_rw_blk.c | 9 | ||||
| -rw-r--r-- | drivers/md/md.c | 1 | ||||
| -rwxr-xr-x | drivers/net/amd8111e.c | 8 | ||||
| -rw-r--r-- | drivers/net/at1700.c | 4 | ||||
| -rw-r--r-- | drivers/net/skge.c | 1710 | ||||
| -rw-r--r-- | drivers/net/skge.h | 586 | ||||
| -rw-r--r-- | drivers/net/smc91x.c | 2 | ||||
| -rw-r--r-- | drivers/net/smc91x.h | 13 | ||||
| -rw-r--r-- | drivers/scsi/ahci.c | 22 | ||||
| -rw-r--r-- | drivers/scsi/libata-core.c | 6 | ||||
| -rw-r--r-- | include/linux/etherdevice.h | 2 | ||||
| -rw-r--r-- | include/net/ieee80211.h | 48 | ||||
| -rw-r--r-- | init/main.c | 7 | ||||
| -rw-r--r-- | kernel/kexec.c | 10 | ||||
| -rw-r--r-- | kernel/sched.c | 9 |
17 files changed, 1093 insertions, 1441 deletions
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 6df1dfd18b6..375ae760dc1 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -84,6 +84,14 @@ void (*port_disable) (struct ata_port *); Called from ata_bus_probe() and ata_bus_reset() error paths, as well as when unregistering from the SCSI module (rmmod, hot unplug). + This function should do whatever needs to be done to take the + port out of use. In most cases, ata_port_disable() can be used + as this hook. + </para> + <para> + Called from ata_bus_probe() on a failed probe. + Called from ata_bus_reset() on a failed bus reset. + Called from ata_scsi_release(). </para> </sect2> @@ -98,6 +106,13 @@ void (*dev_config) (struct ata_port *, struct ata_device *); found. Typically used to apply device-specific fixups prior to issue of SET FEATURES - XFER MODE, and prior to operation. </para> + <para> + Called by ata_device_add() after ata_dev_identify() determines + a device is present. + </para> + <para> + This entry may be specified as NULL in ata_port_operations. + </para> </sect2> @@ -135,6 +150,8 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); registers / DMA buffers. ->tf_read() is called to read the hardware registers / DMA buffers, to obtain the current set of taskfile register values. + Most drivers for taskfile-based hardware (PIO or MMIO) use + ata_tf_load() and ata_tf_read() for these hooks. </para> </sect2> @@ -147,6 +164,8 @@ void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); <para> causes an ATA command, previously loaded with ->tf_load(), to be initiated in hardware. + Most drivers for taskfile-based hardware use ata_exec_command() + for this hook. </para> </sect2> @@ -161,6 +180,10 @@ Allow low-level driver to filter ATA PACKET commands, returning a status indicating whether or not it is OK to use DMA for the supplied PACKET command. </para> + <para> + This hook may be specified as NULL, in which case libata will + assume that atapi dma can be supported. + </para> </sect2> @@ -175,6 +198,14 @@ u8 (*check_err)(struct ata_port *ap); Reads the Status/AltStatus/Error ATA shadow register from hardware. On some hardware, reading the Status register has the side effect of clearing the interrupt condition. + Most drivers for taskfile-based hardware use + ata_check_status() for this hook. + </para> + <para> + Note that because this is called from ata_device_add(), at + least a dummy function that clears device interrupts must be + provided for all drivers, even if the controller doesn't + actually have a taskfile status register. </para> </sect2> @@ -188,7 +219,13 @@ void (*dev_select)(struct ata_port *ap, unsigned int device); Issues the low-level hardware command(s) that causes one of N hardware devices to be considered 'selected' (active and available for use) on the ATA bus. This generally has no -meaning on FIS-based devices. + meaning on FIS-based devices. + </para> + <para> + Most drivers for taskfile-based hardware use + ata_std_dev_select() for this hook. Controllers which do not + support second drives on a port (such as SATA contollers) will + use ata_noop_dev_select(). </para> </sect2> @@ -204,6 +241,8 @@ void (*phy_reset) (struct ata_port *ap); for device presence (PATA and SATA), typically a soft reset (SRST) will be performed. Drivers typically use the helper functions ata_bus_reset() or sata_phy_reset() for this hook. + Many SATA drivers use sata_phy_reset() or call it from within + their own phy_reset() functions. </para> </sect2> @@ -227,6 +266,25 @@ PCI IDE DMA Status register. These hooks are typically either no-ops, or simply not implemented, in FIS-based drivers. </para> + <para> +Most legacy IDE drivers use ata_bmdma_setup() for the bmdma_setup() +hook. ata_bmdma_setup() will write the pointer to the PRD table to +the IDE PRD Table Address register, enable DMA in the DMA Command +register, and call exec_command() to begin the transfer. + </para> + <para> +Most legacy IDE drivers use ata_bmdma_start() for the bmdma_start() +hook. ata_bmdma_start() will write the ATA_DMA_START flag to the DMA +Command register. + </para> + <para> +Many legacy IDE drivers use ata_bmdma_stop() for the bmdma_stop() +hook. ata_bmdma_stop() clears the ATA_DMA_START flag in the DMA +command register. + </para> + <para> +Many legacy IDE drivers use ata_bmdma_status() as the bmdma_status() hook. + </para> </sect2> @@ -250,6 +308,10 @@ int (*qc_issue) (struct ata_queued_cmd *qc); helper function ata_qc_issue_prot() for taskfile protocol-based dispatch. More advanced drivers implement their own ->qc_issue. </para> + <para> + ata_qc_issue_prot() calls ->tf_load(), ->bmdma_setup(), and + ->bmdma_start() as necessary to initiate a transfer. + </para> </sect2> @@ -279,6 +341,21 @@ void (*irq_clear) (struct ata_port *); before the interrupt handler is registered, to be sure hardware is quiet. </para> + <para> + The second argument, dev_instance, should be cast to a pointer + to struct ata_host_set. + </para> + <para> + Most legacy IDE drivers use ata_interrupt() for the + irq_handler hook, which scans all ports in the host_set, + determines which queued command was active (if any), and calls + ata_host_intr(ap,qc). + </para> + <para> + Most legacy IDE drivers use ata_bmdma_irq_clear() for the + irq_clear() hook, which simply clears the interrupt and error + flags in the DMA status register. + </para> </sect2> @@ -292,6 +369,7 @@ void (*scr_write) (struct ata_port *ap, unsigned int sc_reg, <para> Read and write standard SATA phy registers. Currently only used if ->phy_reset hook called the sata_phy_reset() helper function. + sc_reg is one of SCR_STATUS, SCR_CONTROL, SCR_ERROR, or SCR_ACTIVE. </para> </sect2> @@ -307,17 +385,29 @@ void (*host_stop) (struct ata_host_set *host_set); ->port_start() is called just after the data structures for each port are initialized. Typically this is used to alloc per-port DMA buffers / tables / rings, enable DMA engines, and similar - tasks. + tasks. Some drivers also use this entry point as a chance to + allocate driver-private memory for ap->private_data. + </para> + <para> + Many drivers use ata_port_start() as this hook or call + it from their own port_start() hooks. ata_port_start() + allocates space for a legacy IDE PRD table and returns. </para> <para> ->port_stop() is called after ->host_stop(). It's sole function is to release DMA/memory resources, now that they are no longer - actively being used. + actively being used. Many drivers also free driver-private + data from port at this time. + </para> + <para> + Many drivers use ata_port_stop() as this hook, which frees the + PRD table. </para> <para> ->host_stop() is called after all ->port_stop() calls have completed. The hook must finalize hardware shutdown, release DMA and other resources, etc. + This hook may be specified as NULL, in which case it is not called. </para> </sect2> diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 653512b7757..3e9fb6e4a52 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -786,7 +786,6 @@ static int cciss_ioctl(struct inode *inode, struct file *filep, case CCISS_GETLUNINFO: { LogvolInfo_struct luninfo; - int i; luninfo.LunID = drv->LunID; luninfo.num_opens = drv->usage_count; diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c index 234fdcfbdf0..6c98cf04271 100644 --- a/drivers/block/ll_rw_blk.c +++ b/drivers/block/ll_rw_blk.c @@ -1912,6 +1912,15 @@ static struct request *get_request(request_queue_t *q, int rw, struct bio *bio, } get_rq: + /* + * Only allow batching queuers to allocate up to 50% over the defined + * limit of requests, otherwise we could have thousands of requests + * allocated with any setting of ->nr_requests + */ + if (rl->count[rw] >= (3 * q->nr_requests / 2)) { + spin_unlock_irq(q->queue_lock); + goto out; + } rl->count[rw]++; rl->starved[rw] = 0; if (rl->count[rw] >= queue_congestion_on_threshold(q)) diff --git a/drivers/md/md.c b/drivers/md/md.c index 3802f7a17f1..4a0c57db2b6 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -338,6 +338,7 @@ static int super_written(struct bio *bio, unsigned int bytes_done, int error) if (atomic_dec_and_test(&rdev->mddev->pending_writes)) wake_up(&rdev->mddev->sb_wait); + bio_put(bio); return 0; } diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index b7dd7260caf..8618012df06 100755 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -87,6 +87,7 @@ Revision History: #include <linux/if_vlan.h> #include <linux/ctype.h> #include <linux/crc32.h> +#include <linux/dma-mapping.h> #include <asm/system.h> #include <asm/io.h> @@ -2006,12 +2007,11 @@ static int __devinit amd8111e_probe_one(struct pci_dev *pdev, } /* Initialize DMA */ - if(!pci_dma_supported(pdev, 0xffffffff)){ + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) < 0) { printk(KERN_ERR "amd8111e: DMA not supported," "exiting.\n"); - goto err_free_reg; - } else - pdev->dma_mask = 0xffffffff; + goto err_free_reg; + } reg_addr = pci_resource_start(pdev, 0); reg_len = pci_resource_len(pdev, 0); diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c index b8ab2b6355e..e613cc28974 100644 --- a/drivers/net/at1700.c +++ b/drivers/net/at1700.c @@ -34,10 +34,6 @@ only is it difficult to detect, it also moves around in I/O space in response to inb()s from other device probes! */ -/* - 99/03/03 Allied Telesis RE1000 Plus support by T.Hagawa - 99/12/30 port to 2.3.35 by K.Takai -*/ #include <linux/config.h> #include <linux/errno.h> diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 30e8d589d16..3dbb1cb09ed 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -7,7 +7,7 @@ * of the original driver such as link fail-over and link management because * those should be done at higher levels. * - * Copyright (C) 2004, Stephen Hemminger <shemminger@osdl.org> + * Copyright (C) 2004, 2005 Stephen Hemminger <shemminger@osdl.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -42,19 +42,20 @@ #include "skge.h" #define DRV_NAME "skge" -#define DRV_VERSION "0.6" +#define DRV_VERSION "0.7" #define PFX DRV_NAME " " #define DEFAULT_TX_RING_SIZE 128 #define DEFAULT_RX_RING_SIZE 512 #define MAX_TX_RING_SIZE 1024 #define MAX_RX_RING_SIZE 4096 +#define RX_COPY_THRESHOLD 128 +#define RX_BUF_SIZE 1536 #define PHY_RETRIES 1000 #define ETH_JUMBO_MTU 9000 #define TX_WATCHDOG (5 * HZ) #define NAPI_WEIGHT 64 #define BLINK_HZ (HZ/4) -#define LINK_POLL_HZ (HZ/10) MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver"); MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>"); @@ -70,28 +71,17 @@ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); static const struct pci_device_id skge_id_table[] = { - { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_SYSKONNECT, 0x9E00, /* SK-9Exx */ - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_MARVELL, 0x4320, /* Gigabit Ethernet Controller */ - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_MARVELL, 0x5005, /* Marvell (11ab), Belkin */ - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1032, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1064, - PCI_ANY_ID, PCI_ANY_ID }, + { PCI_DEVICE(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940) }, + { PCI_DEVICE(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B) }, + { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) }, + { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) }, + { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */ + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */ + { PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) }, + { PCI_DEVICE(PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1032) }, + { PCI_DEVICE(PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1064) }, { 0 } }; MODULE_DEVICE_TABLE(pci, skge_id_table); @@ -99,19 +89,22 @@ MODULE_DEVICE_TABLE(pci, skge_id_table); static int skge_up(struct net_device *dev); static int skge_down(struct net_device *dev); static void skge_tx_clean(struct skge_port *skge); -static void skge_xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); -static void skge_gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); +static void xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); +static void gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); static void genesis_get_stats(struct skge_port *skge, u64 *data); static void yukon_get_stats(struct skge_port *skge, u64 *data); static void yukon_init(struct skge_hw *hw, int port); static void yukon_reset(struct skge_hw *hw, int port); static void genesis_mac_init(struct skge_hw *hw, int port); static void genesis_reset(struct skge_hw *hw, int port); +static void genesis_link_up(struct skge_port *skge); +/* Avoid conditionals by using array */ static const int txqaddr[] = { Q_XA1, Q_XA2 }; static const int rxqaddr[] = { Q_R1, Q_R2 }; static const u32 rxirqmask[] = { IS_R1_F, IS_R2_F }; static const u32 txirqmask[] = { IS_XA1_F, IS_XA2_F }; +static const u32 portirqmask[] = { IS_PORT_1, IS_PORT_2 }; /* Don't need to look at whole 16K. * last interesting register is descriptor poll timer. @@ -154,7 +147,7 @@ static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs, static int wol_supported(const struct skge_hw *hw) { return !((hw->chip_id == CHIP_ID_GENESIS || - (hw->chip_id == CHIP_ID_YUKON && chip_rev(hw) == 0))); + (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev == 0))); } static void skge_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) @@ -170,7 +163,7 @@ static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) struct skge_port *skge = netdev_priv(dev); struct skge_hw *hw = skge->hw; - if(wol->wolopts != WAKE_MAGIC && wol->wolopts != 0) + if (wol->wolopts != WAKE_MAGIC && wol->wolopts != 0) return -EOPNOTSUPP; if (wol->wolopts == WAKE_MAGIC && !wol_supported(hw)) @@ -190,6 +183,36 @@ static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) return 0; } +/* Determine supported/adverised modes based on hardware. + * Note: ethtoool ADVERTISED_xxx == SUPPORTED_xxx + */ +static u32 skge_supported_modes(const struct skge_hw *hw) +{ + u32 supported; + + if (iscopper(hw)) { + supported = SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full + | SUPPORTED_Autoneg| SUPPORTED_TP; + + if (hw->chip_id == CHIP_ID_GENESIS) + supported &= ~(SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full); + + else if (hw->chip_id == CHIP_ID_YUKON) + supported &= ~SUPPORTED_1000baseT_Half; + } else + supported = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE + | SUPPORTED_Autoneg; + + return supported; +} static int skge_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) @@ -198,38 +221,13 @@ static int skge_get_settings(struct net_device *dev, struct skge_hw *hw = skge->hw; ecmd->transceiver = XCVR_INTERNAL; + ecmd->supported = skge_supported_modes(hw); if (iscopper(hw)) { - if (hw->chip_id == CHIP_ID_GENESIS) - ecmd->supported = SUPPORTED_1000baseT_Full - | SUPPORTED_1000baseT_Half - | SUPPORTED_Autoneg | SUPPORTED_TP; - else { - ecmd->supported = SUPPORTED_10baseT_Half - | SUPPORTED_10baseT_Full - | SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full - | SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full - | SUPPORTED_Autoneg| SUPPORTED_TP; - - if (hw->chip_id == CHIP_ID_YUKON) - ecmd->supported &= ~SUPPORTED_1000baseT_Half; - - else if (hw->chip_id == CHIP_ID_YUKON_FE) - ecmd->supported &= ~(SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full); - } - ecmd->port = PORT_TP; ecmd->phy_address = hw->phy_addr; - } else { - ecmd->supported = SUPPORTED_1000baseT_Full - | SUPPORTED_FIBRE - | SUPPORTED_Autoneg; - + } else ecmd->port = PORT_FIBRE; - } ecmd->advertising = skge->advertising; ecmd->autoneg = skge->autoneg; @@ -238,65 +236,57 @@ static int skge_get_settings(struct net_device *dev, return 0; } -static u32 skge_modes(const struct skge_hw *hw) -{ - u32 modes = ADVERTISED_Autoneg - | ADVERTISED_1000baseT_Full | ADVERTISED_1000baseT_Half - | ADVERTISED_100baseT_Full | ADVERTISED_100baseT_Half - | ADVERTISED_10baseT_Full | ADVERTISED_10baseT_Half; - - if (iscopper(hw)) { - modes |= ADVERTISED_TP; - switch(hw->chip_id) { - case CHIP_ID_GENESIS: - modes &= ~(ADVERTISED_100baseT_Full - | ADVERTISED_100baseT_Half - | ADVERTISED_10baseT_Full - | ADVERTISED_10baseT_Half); - break; - - case CHIP_ID_YUKON: - modes &= ~ADVERTISED_1000baseT_Half; - break; - - case CHIP_ID_YUKON_FE: - modes &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full); - break; - } - } else { - modes |= ADVERTISED_FIBRE; - modes &= ~ADVERTISED_1000baseT_Half; - } - return modes; -} - static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) { struct skge_port *skge = netdev_priv(dev); const struct skge_hw *hw = skge->hw; + u32 supported = skge_supported_modes(hw); if (ecmd->autoneg == AUTONEG_ENABLE) { - if (ecmd->advertising & skge_modes(hw)) - return -EINVAL; + ecmd->advertising = supported; + skge->duplex = -1; + skge->speed = -1; } else { + u32 setting; + switch(ecmd->speed) { case SPEED_1000: - if (hw->chip_id == CHIP_ID_YUKON_FE) + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_1000baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_1000baseT_Half; + else return -EINVAL; break; case SPEED_100: + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_100baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_100baseT_Half; + else + return -EINVAL; + break; + case SPEED_10: - if (iscopper(hw) || hw->chip_id == CHIP_ID_GENESIS) + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_10baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_10baseT_Half; + else return -EINVAL; break; default: return -EINVAL; } + + if ((setting & supported) == 0) + return -EINVAL; + + skge->speed = ecmd->speed; + skge->duplex = ecmd->duplex; } skge->autoneg = ecmd->autoneg; - skge->speed = ecmd->speed; - skge->duplex = ecmd->duplex; skge->advertising = ecmd->advertising; if (netif_running(dev)) { @@ -393,7 +383,7 @@ static void skge_get_strings(struct net_device *dev, u32 stringset, u8 *data) { int i; - switch(stringset) { + switch (stringset) { case ETH_SS_STATS: for (i = 0; i < ARRAY_SIZE(skge_stats); i++) memcpy(data + i * ETH_GSTRING_LEN, @@ -511,14 +501,6 @@ static int skge_set_rx_csum(struct net_device *dev, u32 data) return 0; } -/* Only Yukon II supports TSO (not implemented yet) */ -static int skge_set_tso(struct net_device *dev, u32 data) -{ - if (data) - return -EOPNOTSUPP; - return 0; -} - static void skge_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *ecmd) { @@ -540,9 +522,9 @@ static int skge_set_pauseparam(struct net_device *dev, skge->autoneg = ecmd->autoneg; if (ecmd->rx_pause && ecmd->tx_pause) skge->flow_control = FLOW_MODE_SYMMETRIC; - else if(ecmd->rx_pause && !ecmd->tx_pause) + else if (ecmd->rx_pause && !ecmd->tx_pause) skge->flow_control = FLOW_MODE_REM_SEND; - else if(!ecmd->rx_pause && ecmd->tx_pause) + else if (!ecmd->rx_pause && ecmd->tx_pause) skge->flow_control = FLOW_MODE_LOC_SEND; else skge->flow_control = FLOW_MODE_NONE; @@ -559,8 +541,6 @@ static inline u32 hwkhz(const struct skge_hw *hw) { if (hw->chip_id == CHIP_ID_GENESIS) return 53215; /* or: 53.125 MHz */ - else if (hw->chip_id == CHIP_ID_YUKON_EC) - return 125000; /* or: 125.000 MHz */ else return 78215; /* or: 78.125 MHz */ } @@ -643,30 +623,18 @@ static int skge_set_coalesce(struct net_device *dev, static void skge_led_on(struct skge_hw *hw, int port) { if (hw->chip_id == CHIP_ID_GENESIS) { - skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_ON); + skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON); skge_write8(hw, B0_LED, LED_STAT_ON); - skge_write8(hw, SKGEMAC_REG(port, RX_LED_TST), LED_T_ON); - skge_write32(hw, SKGEMAC_REG(port, RX_LED_VAL), 100); - skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_START); + skge_write8(hw, SK_REG(port, RX_LED_TST), LED_T_ON); + skge_write32(hw, SK_REG(port, RX_LED_VAL), 100); + skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START); - switch (hw->phy_type) { - case SK_PHY_BCOM: - skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, - PHY_B_PEC_LED_ON); - break; - case SK_PHY_LONE: - skge_xm_phy_write(hw, port, PHY_LONE_LED_CFG, - 0x0800); - break; - default: - skge_write8(hw, SKGEMAC_REG(port, TX_LED_TST), LED_T_ON); - skge_write32(hw, SKGEMAC_REG(port, TX_LED_VAL), 100); - skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_START); - } + /* For Broadcom Phy only */ + xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON); } else { - skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); - skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER, + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); + gm_phy_write(hw, port, PHY_MARV_LED_OVER, PHY_M_LED_MO_DUP(MO_LED_ON) | PHY_M_LED_MO_10(MO_LED_ON) | PHY_M_LED_MO_100(MO_LED_ON) | @@ -678,28 +646,17 @@ static void skge_led_on(struct skge_hw *hw, int port) static void skge_led_off(struct skge_hw *hw, int port) { if (hw->chip_id == CHIP_ID_GENESIS) { - skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_OFF); + skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF); skge_write8(hw, B0_LED, LED_STAT_OFF); - skge_write32(hw, SKGEMAC_REG(port, RX_LED_VAL), 0); - skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_T_OFF); + skge_write32(hw, SK_REG(port, RX_LED_VAL), 0); + skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF); - switch (hw->phy_type) { - case SK_PHY_BCOM: - skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, - PHY_B_PEC_LED_OFF); - break; - case SK_PHY_LONE: - skge_xm_phy_write(hw, port, PHY_LONE_LED_CFG, - PHY_L_LC_LEDT); - break; - default: - skge_write32(hw, SKGEMAC_REG(port, TX_LED_VAL), 0); - skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_T_OFF); - } + /* Broadcom only */ + xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF); } else { - skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); - skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER, + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); + gm_phy_write(hw, port, PHY_MARV_LED_OVER, PHY_M_LED_MO_DUP(MO_LED_OFF) | PHY_M_LED_MO_10(MO_LED_OFF) | PHY_M_LED_MO_100(MO_LED_OFF) | @@ -730,7 +687,7 @@ static int skge_phys_id(struct net_device *dev, u32 data) { struct skge_port *skge = netdev_priv(dev); - if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) + if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ); /* start blinking */ @@ -763,8 +720,6 @@ static struct ethtool_ops skge_ethtool_ops = { .set_pauseparam = skge_set_pauseparam, .get_coalesce = skge_get_coalesce, .set_coalesce = skge_set_coalesce, - .get_tso = ethtool_op_get_tso, - .set_tso = skge_set_tso, .get_sg = ethtool_op_get_sg, .set_sg = skge_set_sg, .get_tx_csum = ethtool_op_get_tx_csum, @@ -793,6 +748,7 @@ static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u64 base) for (i = 0, e = ring->start, d = vaddr; i < ring->count; i++, e++, d++) { e->desc = d; + e->skb = NULL; if (i == ring->count - 1) { e->next = ring->start; d->next_offset = base; @@ -806,24 +762,23 @@ static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u64 base) return 0; } -/* Setup buffer for receiving */ -static inline int skge_rx_alloc(struct skge_port *skge, - struct skge_element *e) +static struct sk_buff *skge_rx_alloc(struct net_device *dev, unsigned int size) { - unsigned long bufsize = skge->netdev->mtu + ETH_HLEN; /* VLAN? */ - struct skge_rx_desc *rd = e->desc; - struct sk_buff *skb; - u64 map; + struct sk_buff *skb = dev_alloc_skb(size); - skb = dev_alloc_skb(bufsize + NET_IP_ALIGN); - if (unlikely(!skb)) { - printk(KERN_DEBUG PFX "%s: out of memory for receive\n", - skge->netdev->name); - return -ENOMEM; + if (likely(skb)) { + skb->dev = dev; + skb_reserve(skb, NET_IP_ALIGN); } + return skb; +} - skb->dev = skge->netdev; - skb_reserve(skb, NET_IP_ALIGN); +/* Allocate and setup a new buffer for receiving */ +static void skge_rx_setup(struct skge_port *skge, struct skge_element *e, + struct sk_buff *skb, unsigned int bufsize) +{ + struct skge_rx_desc *rd = e->desc; + u64 map; map = pci_map_single(skge->hw->pdev, skb->data, bufsize, PCI_DMA_FROMDEVICE); @@ -841,55 +796,69 @@ static inline int skge_rx_alloc(struct skge_port *skge, rd->control = BMU_OWN | BMU_STF | BMU_IRQ_EOF | BMU_TCP_CHECK | bufsize; pci_unmap_addr_set(e, mapaddr, map); pci_unmap_len_set(e, maplen, bufsize); - return 0; } -/* Free all unused buffers in receive ring, assumes receiver stopped */ +/* Resume receiving using existing skb, + * Note: DMA address is not changed by chip. + * MTU not changed while receiver active. + */ +static void skge_rx_reuse(struct skge_element *e, unsigned int size) +{ + struct skge_rx_desc *rd = e->desc; + + rd->csum2 = 0; + rd->csum2_start = ETH_HLEN; + + wmb(); + + rd->control = BMU_OWN | BMU_STF | BMU_IRQ_EOF | BMU_TCP_CHECK | size; +} + + +/* Free all buffers in receive ring, assumes receiver stopped */ static void skge_rx_clean(struct skge_port *skge) { struct skge_hw *hw = skge->hw; struct skge_ring *ring = &skge->rx_ring; struct skge_element *e; - for (e = ring->to_clean; e != ring->to_use; e = e->next) { + e = ring->start; + do { struct skge_rx_desc *rd = e->desc; rd->control = 0; - - pci_unmap_single(hw->pdev, - pci_unmap_addr(e, mapaddr), - pci_unmap_len(e, maplen), - PCI_DMA_FROMDEVICE); - dev_kfree_skb(e->skb); - e->skb = NULL; - } - ring->to_clean = e; + if (e->skb) { + pci_unmap_single(hw->pdev, + pci_unmap_addr(e, mapaddr), + pci_unmap_len(e, maplen), + PCI_DMA_FROMDEVICE); + dev_kfree_skb(e->skb); + e->skb = NULL; + } + } while ((e = e->next) != ring->start); } + /* Allocate buffers for receive ring - * For receive: to_use is refill location - * to_clean is next received frame. - * - * if (to_use == to_clean) - * then ring all frames in ring need buffers - * if (to_use->next == to_clean) - * then ring all frames in ring have buffers + * For receive: to_clean is next received frame. */ static int skge_rx_fill(struct skge_port *skge) { struct skge_ring *ring = &skge->rx_ring; struct skge_element *e; - int ret = 0; + unsigned int bufsize = skge->rx_buf_size; - for (e = ring->to_use; e->next != ring->to_clean; e = e->next) { - if (skge_rx_alloc(skge, e)) { - ret = 1; - break; - } + e = ring->start; + do { + struct sk_buff *skb = skge_rx_alloc(skge->netdev, bufsize); - } - ring->to_use = e; + if (!skb) + return -ENOMEM; + + skge_rx_setup(skge, e, skb, bufsize); + } while ( (e = e->next) != ring->start); - return ret; + ring->to_clean = ring->start; + return 0; } static void skge_link_up(struct skge_port *skge) @@ -919,50 +888,50 @@ static void skge_link_down(struct skge_port *skge) printk(KERN_INFO PFX "%s: Link is down.\n", skge->netdev->name); } -static u16 skge_xm_phy_read(struct skge_hw *hw, int port, u16 reg) +static u16 xm_phy_read(struct skge_hw *hw, int port, u16 reg) { int i; u16 v; - skge_xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); - v = skge_xm_read16(hw, port, XM_PHY_DATA); - if (hw->phy_type != SK_PHY_XMAC) { - for (i = 0; i < PHY_RETRIES; i++) { - udelay(1); - if (skge_xm_read16(hw, port, XM_MMU_CMD) - & XM_MMU_PHY_RDY) - goto ready; - } + xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); + v = xm_read16(hw, port, XM_PHY_DATA); - printk(KERN_WARNING PFX "%s: phy read timed out\n", - hw->dev[port]->name); - return 0; - ready: - v = skge_xm_read16(hw, port, XM_PHY_DATA); + /* Need to wait for external PHY */ + for (i = 0; i < PHY_RETRIES; i++) { + udelay(1); + if (xm_read16(hw, port, XM_MMU_CMD) + & XM_MMU_PHY_RDY) + goto ready; } + printk(KERN_WARNING PFX "%s: phy read timed out\n", + hw->dev[port]->name); + return 0; + ready: + v = xm_read16(hw, port, XM_PHY_DATA); + return v; } -static void skge_xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val) +static void xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val) { int i; - skge_xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); + xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); for (i = 0; i < PHY_RETRIES; i++) { - if (!(skge_xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY)) + if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY)) goto ready; - cpu_relax(); + udelay(1); } printk(KERN_WARNING PFX "%s: phy write failed to come ready\n", hw->dev[port]->name); ready: - skge_xm_write16(hw, port, XM_PHY_DATA, val); + xm_write16(hw, port, XM_PHY_DATA, val); for (i = 0; i < PHY_RETRIES; i++) { udelay(1); - if (!(skge_xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY)) + if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY)) return; } printk(KERN_WARNING PFX "%s: phy write timed out\n", @@ -999,34 +968,112 @@ static void genesis_init(struct skge_hw *hw) static void genesis_reset(struct skge_hw *hw, int port) { - int i; - u64 zero = 0; + const u8 zero[8] = { 0 }; /* reset the statistics module */ - skge_xm_write32(hw, port, XM_GP_PORT, XM_GP_RES_STAT); - skge_xm_write16(hw, port, XM_IMSK, 0xffff); /* disable XMAC IRQs */ - skge_xm_write32(hw, port, XM_MODE, 0); /* clear Mode Reg */ - skge_xm_write16(hw, port, XM_TX_CMD, 0); /* reset TX CMD Reg */ - skge_xm_write16(hw, port, XM_RX_CMD, 0); /* reset RX CMD Reg */ + xm_write32(hw, port, XM_GP_PORT, XM_GP_RES_STAT); + xm_write16(hw, port, XM_IMSK, 0xffff); /* disable XMAC IRQs */ + xm_write32(hw, port, XM_MODE, 0); /* clear Mode Reg */ + xm_write16(hw, port, XM_TX_CMD, 0); /* reset TX CMD Reg */ + xm_write16(hw, port, XM_RX_CMD, 0); /* reset RX CMD Reg */ - /* disable all PHY IRQs */ - if (hw->phy_type == SK_PHY_BCOM) - skge_xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff); + /* disable Broadcom PHY IRQ */ + xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff); - skge_xm_outhash(hw, port, XM_HSM, (u8 *) &zero); - for (i = 0; i < 15; i++) - skge_xm_outaddr(hw, port, XM_EXM(i), (u8 *) &zero); - skge_xm_outhash(hw, port, XM_SRC_CHK, (u8 *) &zero); + xm_outhash(hw, port, XM_HSM, zero); } -static void genesis_mac_init(struct skge_hw *hw, int port) +/* Convert mode to MII values */ +static const u16 phy_pause_map[] = { + [FLOW_MODE_NONE] = 0, + [FLOW_MODE_LOC_SEND] = PHY_AN_PAUSE_ASYM, + [FLOW_MODE_SYMMETRIC] = PHY_AN_PAUSE_CAP, + [FLOW_MODE_REM_SEND] = PHY_AN_PAUSE_CAP | PHY_AN_PAUSE_ASYM, +}; + + +/* Check status of Broadcom phy link */ +static void bcom_check_link(struct skge_hw *hw, int port) { - struct skge_port *skge = netdev_priv(hw->dev[port]); + struct net_device *dev = hw->dev[port]; + struct skge_port *skge = netdev_priv(dev); + u16 status; + + /* read twice because of latch */ + (void) xm_phy_read(hw, port, PHY_BCOM_STAT); + status = xm_phy_read(hw, port, PHY_BCOM_STAT); + + pr_debug("bcom_check_link status=0x%x\n", status); + + if ((status & PHY_ST_LSYNC) == 0) { + u16 cmd = xm_read16(hw, port, XM_MMU_CMD); + cmd &= ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX); + xm_write16(hw, port, XM_MMU_CMD, cmd); + /* dummy read to ensure writing */ + (void) xm_read16(hw, port, XM_MMU_CMD); + + if (netif_carrier_ok(dev)) + skge_link_down(skge); + } else { + if (skge->autoneg == AUTONEG_ENABLE && + (status & PHY_ST_AN_OVER)) { + u16 lpa = xm_phy_read(hw, port, PHY_BCOM_AUNE_LP); + u16 aux = xm_phy_read(hw, port, PHY_BCOM_AUX_STAT); + + if (lpa & PHY_B_AN_RF) { + printk(KERN_NOTICE PFX "%s: remote fault\n", + dev->name); + return; + } + + /* Check Duplex mismatch */ + switch(aux & PHY_B_AS_AN_RES_MSK) { + case PHY_B_RES_1000FD: + skge->duplex = DUPLEX_FULL; + break; + case PHY_B_RES_1000HD: + skge->duplex = DUPLEX_HALF; + break; + default: + printk(KERN_NOTICE PFX "%s: duplex mismatch\n", + dev->name); + return; + } + + + /* We are using IEEE 802.3z/D5.0 Table 37-4 */ + switch (aux & PHY_B_AS_PAUSE_MSK) { + case PHY_B_AS_PAUSE_MSK: + skge->flow_control = FLOW_MODE_SYMMETRIC; + break; + case PHY_B_AS_PRR: + skge->flow_control = FLOW_MODE_REM_SEND; + break; + case PHY_B_AS_PRT: + skge->flow_control = FLOW_MODE_LOC_SEND; + break; + default: + skge->flow_control = FLOW_MODE_NONE; + } + + skge->speed = SPEED_1000; + } + + if (!netif_carrier_ok(dev)) + genesis_link_up(skge); + } +} + +/* Broadcom 5400 only supports giagabit! SysKonnect did not put an additional + * Phy on for 100 or 10Mbit operation + */ +static void bcom_phy_init(struct skge_port *skge, int jumbo) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; int i; - u32 r; - u16 id1; - u16 ctrl1, ctrl2, ctrl3, ctrl4, ctrl5; + u16 id1, r, ext, ctl; /* magic workaround patterns for Broadcom */ static const struct { @@ -1042,16 +1089,120 @@ static void genesis_mac_init(struct skge_hw *hw, int port) { 0x17, 0x0013 }, { 0x15, 0x0A04 }, { 0x18, 0x0420 }, }; + pr_debug("bcom_phy_init\n"); + + /* read Id from external PHY (all have the same address) */ + id1 = xm_phy_read(hw, port, PHY_XMAC_ID1); + + /* Optimize MDIO transfer by suppressing preamble. */ + r = xm_read16(hw, port, XM_MMU_CMD); + r |= XM_MMU_NO_PRE; + xm_write16(hw, port, XM_MMU_CMD,r); + + switch(id1) { + case PHY_BCOM_ID1_C0: + /* + * Workaround BCOM Errata for the C0 type. + * Write magic patterns to reserved registers. + */ + for (i = 0; i < ARRAY_SIZE(C0hack); i++) + xm_phy_write(hw, port, + C0hack[i].reg, C0hack[i].val); + + break; + case PHY_BCOM_ID1_A1: + /* + * Workaround BCOM Errata for the A1 type. + * Write magic patterns to reserved registers. + */ + for (i = 0; i < ARRAY_SIZE(A1hack); i++) + xm_phy_write(hw, port, + A1hack[i].reg, A1hack[i].val); + break; + } + + /* + * Workaround BCOM Errata (#10523) for all BCom PHYs. + * Disable Power Management after reset. + */ + r = xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL); + r |= PHY_B_AC_DIS_PM; + xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r); + + /* Dummy read */ + xm_read16(hw, port, XM_ISRC); + + ext = PHY_B_PEC_EN_LTR; /* enable tx led */ + ctl = PHY_CT_SP1000; /* always 1000mbit */ + + if (skge->autoneg == AUTONEG_ENABLE) { + /* + * Workaround BCOM Errata #1 for the C5 type. + * 1000Base-T Link Acquisition Failure in Slave Mode + * Set Repeater/DTE bit 10 of the 1000Base-T Control Register + */ + u16 adv = PHY_B_1000C_RD; + if (skge->advertising & ADVERTISED_1000baseT_Half) + adv |= PHY_B_1000C_AHD; + if (skge->advertising & ADVERTISED_1000baseT_Full) + adv |= PHY_B_1000C_AFD; + xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, adv); + + ctl |= PHY_CT_ANE | PHY_CT_RE_CFG; + } else { + if (skge->duplex == DUPLEX_FULL) + ctl |= PHY_CT_DUP_MD; + /* Force to slave */ + xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, PHY_B_1000C_MSE); + } + + /* Set autonegotiation pause parameters */ + xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, + phy_pause_map[skge->flow_control] | PHY_AN_CSMA); + + /* Handle Jumbo frames */ + if (jumbo) { + xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, + PHY_B_AC_TX_TST | PHY_B_AC_LONG_PACK); + + ext |= PHY_B_PEC_HIGH_LA; + + } + + xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ext); + xm_phy_write(hw, port, PHY_BCOM_CTRL, ctl); + + /* Use link status change interrrupt */ + xm_phy_write(hw, port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK); + + bcom_check_link(hw, port); +} + +static void genesis_mac_init(struct skge_hw *hw, int port) +{ + struct net_device *dev = hw->dev[port]; + struct skge_port *skge = netdev_priv(dev); + int jumbo = hw->dev[port]->mtu > ETH_DATA_LEN; + int i; + u32 r; + const u8 zero[6] = { 0 }; + + /* Clear MIB counters */ + xm_write16(hw, port, XM_STAT_CMD, + XM_SC_CLR_RXC | XM_SC_CLR_TXC); + /* Clear two times according to Errata #3 */ + xm_write16(hw, port, XM_STAT_CMD, + XM_SC_CLR_RXC | XM_SC_CLR_TXC); /* initialize Rx, Tx and Link LED */ - skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_ON); - skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON); + skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON); + skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON); - skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_START); - skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_START); + skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START); + skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START); /* Unreset the XMAC. */ - skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST); + skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST); /* * Perform additional initialization for external PHYs, @@ -1059,67 +1210,56 @@ static void genesis_mac_init(struct skge_hw *hw, int port) * GMII mode. */ spin_lock_bh(&hw->phy_lock); - if (hw->phy_type != SK_PHY_XMAC) { - /* Take PHY out of reset. */ - r = skge_read32(hw, B2_GP_IO); - if (port == 0) - r |= GP_DIR_0|GP_IO_0; - else - r |= GP_DIR_2|GP_IO_2; - - skge_write32(hw, B2_GP_IO, r); - skge_read32(hw, B2_GP_IO); - - /* Enable GMII mode on the XMAC. */ - skge_xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD); - - id1 = skge_xm_phy_read(hw, port, PHY_XMAC_ID1); - - /* Optimize MDIO transfer by suppressing preamble. */ - skge_xm_write16(hw, port, XM_MMU_CMD, - skge_xm_read16(hw, port, XM_MMU_CMD) - | XM_MMU_NO_PRE); - - if (id1 == PHY_BCOM_ID1_C0) { - /* - * Workaround BCOM Errata for the C0 type. - * Write magic patterns to reserved registers. - */ - for (i = 0; i < ARRAY_SIZE(C0hack); i++) - skge_xm_phy_write(hw, port, - C0hack[i].reg, C0hack[i].val); - - } else if (id1 == PHY_BCOM_ID1_A1) { - /* - * Workaround BCOM Errata for the A1 type. - * Write magic patterns to reserved registers. - */ - for (i = 0; i < ARRAY_SIZE(A1hack); i++) - skge_xm_phy_write(hw, port, - A1hack[i].reg, A1hack[i].val); - } + /* Take external Phy out of reset */ + r = skge_read32(hw, B2_GP_IO); + if (port == 0) + r |= GP_DIR_0|GP_IO_0; + else + r |= GP_DIR_2|GP_IO_2; - /* - * Workaround BCOM Errata (#10523) for all BCom PHYs. - * Disable Power Management after reset. - */ - r = skge_xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL); - skge_xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r | PHY_B_AC_DIS_PM); - } + skge_write32(hw, B2_GP_IO, r); + skge_read32(hw, B2_GP_IO); + spin_unlock_bh(&hw->phy_lock); - /* Dummy read */ - skge_xm_read16(hw, port, XM_ISRC); + /* Enable GMII interfac */ + xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD); + + bcom_phy_init(skge, jumbo); + + /* Set Station Address */ + xm_outaddr(hw, port, XM_SA, dev->dev_addr); + + /* We don't use match addresses so clear */ + for (i = 1; i < 16; i++) + xm_outaddr(hw, port, XM_EXM(i), zero); - r = skge_xm_read32(hw, port, XM_MODE); - skge_xm_write32(hw, port, XM_MODE, r|XM_MD_CSA); + /* configure Rx High Water Mark (XM_RX_HI_WM) */ + xm_write16(hw, port, XM_RX_HI_WM, 1450); /* We don't need the FCS appended to the packet. */ - r = skge_xm_read16(hw, port, XM_RX_CMD); - skge_xm_write16(hw, port, XM_RX_CMD, r | XM_RX_STRIP_FCS); + r = XM_RX_LENERR_OK | XM_RX_STRIP_FCS; + if (jumbo) + r |= XM_RX_BIG_PK_OK; + + if (skge->duplex == DUPLEX_HALF) { + /* + * If in manual half duplex mode the other side might be in + * full duplex mode, so ignore if a carrier extension is not seen + * on frames received + */ + r |= XM_RX_DIS_CEXT; + } + xm_write16(hw, port, XM_RX_CMD, r); + /* We want short frames padded to 60 bytes. */ - r = skge_xm_read16(hw, port, XM_TX_CMD); - skge_xm_write16(hw, port, XM_TX_CMD, r | XM_TX_AUTO_PAD); + xm_write16(hw, port, XM_TX_CMD, XM_TX_AUTO_PAD); + + /* + * Bump up the transmit threshold. This helps hold off transmit + * underruns when we're blasting traffic from both ports at once. + */ + xm_write16(hw, port, XM_TX_THR, 512); /* * Enable the reception of all error frames. This is is @@ -1135,19 +1275,22 @@ static void genesis_mac_init(struct skge_hw *hw, int port) * case the XMAC will start transfering frames out of the * RX FIFO as soon as the FIFO threshold is reached. */ - r = skge_xm_read32(hw, port, XM_MODE); - skge_xm_write32(hw, port, XM_MODE, - XM_MD_RX_CRCE|XM_MD_RX_LONG|XM_MD_RX_RUNT| - XM_MD_RX_ERR|XM_MD_RX_IRLE); + xm_write32(hw, port, XM_MODE, XM_DEF_MODE); - skge_xm_outaddr(hw, port, XM_SA, hw->dev[port]->dev_addr); - skge_xm_outaddr(hw, port, XM_EXM(0), hw->dev[port]->dev_addr); /* - * Bump up the transmit threshold. This helps hold off transmit - * underruns when we're blasting traffic from both ports at once. + * Initialize the Receive Counter Event Mask (XM_RX_EV_MSK) + * - Enable all bits excepting 'Octets Rx OK Low CntOv' + * and 'Octets Rx OK Hi Cnt Ov'. */ - skge_xm_write16(hw, port, XM_TX_THR, 512); + xm_write32(hw, port, XM_RX_EV_MSK, XMR_DEF_MSK); + + /* + * Initialize the Transmit Counter Event Mask (XM_TX_EV_MSK) + * - Enable all bits excepting 'Octets Tx OK Low CntOv' + * and 'Octets Tx OK Hi Cnt Ov'. + */ + xm_write32(hw, port, XM_TX_EV_MSK, XMT_DEF_MSK); /* Configure MAC arbiter */ skge_write16(hw, B3_MA_TO_CTRL, MA_RST_CLR); @@ -1164,137 +1307,30 @@ static void genesis_mac_init(struct skge_hw *hw, int port) skge_write8(hw, B3_MA_RCINI_TX2, 0); /* Configure Rx MAC FIFO */ - skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_RST_CLR); - skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_ENA_TIM_PAT); - skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_ENA_OP_MD); + skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_RST_CLR); + skge_write16(hw, SK_REG(port, RX_MFF_CTRL1), MFF_ENA_TIM_PAT); + skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_ENA_OP_MD); /* Configure Tx MAC FIFO */ - skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_RST_CLR); - skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF); - skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_ENA_OP_MD); + skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_RST_CLR); + skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF); + skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_ENA_OP_MD); - if (hw->dev[port]->mtu > ETH_DATA_LEN) { + if (jumbo) { /* Enable frame flushing if jumbo frames used */ - skge_write16(hw, SKGEMAC_REG(port,RX_MFF_CTRL1), MFF_ENA_FLUSH); + skge_write16(hw, SK_REG(port,RX_MFF_CTRL1), MFF_ENA_FLUSH); } else { /* enable timeout timers if normal frames */ skge_write16(hw, B3_PA_CTRL, - port == 0 ? PA_ENA_TO_TX1 : PA_ENA_TO_TX2); + (port == 0) ? PA_ENA_TO_TX1 : PA_ENA_TO_TX2); } - - - r = skge_xm_read16(hw, port, XM_RX_CMD); - if (hw->dev[port]->mtu > ETH_DATA_LEN) - skge_xm_write16(hw, port, XM_RX_CMD, r | XM_RX_BIG_PK_OK); - else - skge_xm_write16(hw, port, XM_RX_CMD, r & ~(XM_RX_BIG_PK_OK)); - - switch (hw->phy_type) { - case SK_PHY_XMAC: - if (skge->autoneg == AUTONEG_ENABLE) { - ctrl1 = PHY_X_AN_FD | PHY_X_AN_HD; - - switch (skge->flow_control) { - case FLOW_MODE_NONE: - ctrl1 |= PHY_X_P_NO_PAUSE; - break; - case FLOW_MODE_LOC_SEND: - ctrl1 |= PHY_X_P_ASYM_MD; - break; - case FLOW_MODE_SYMMETRIC: - ctrl1 |= PHY_X_P_SYM_MD; - break; - case FLOW_MODE_REM_SEND: - ctrl1 |= PHY_X_P_BOTH_MD; - break; - } - - skge_xm_phy_write(hw, port, PHY_XMAC_AUNE_ADV, ctrl1); - ctrl2 = PHY_CT_ANE | PHY_CT_RE_CFG; - } else { - ctrl2 = 0; - if (skge->duplex == DUPLEX_FULL) - ctrl2 |= PHY_CT_DUP_MD; - } - - skge_xm_phy_write(hw, port, PHY_XMAC_CTRL, ctrl2); - break; - - case SK_PHY_BCOM: - ctrl1 = PHY_CT_SP1000; - ctrl2 = 0; - ctrl3 = PHY_SEL_TYPE; - ctrl4 = PHY_B_PEC_EN_LTR; - ctrl5 = PHY_B_AC_TX_TST; - - if (skge->autoneg == AUTONEG_ENABLE) { - /* - * Workaround BCOM Errata #1 for the C5 type. - * 1000Base-T Link Acquisition Failure in Slave Mode - * Set Repeater/DTE bit 10 of the 1000Base-T Control Register - */ - ctrl2 |= PHY_B_1000C_RD; - if (skge->advertising & ADVERTISED_1000baseT_Half) - ctrl2 |= PHY_B_1000C_AHD; - if (skge->advertising & ADVERTISED_1000baseT_Full) - ctrl2 |= PHY_B_1000C_AFD; - - /* Set Flow-control capabilities */ - switch (skge->flow_control) { - case FLOW_MODE_NONE: - ctrl3 |= PHY_B_P_NO_PAUSE; - break; - case FLOW_MODE_LOC_SEND: - ctrl3 |= PHY_B_P_ASYM_MD; - break; - case FLOW_MODE_SYMMETRIC: - ctrl3 |= PHY_B_P_SYM_MD; - break; - case FLOW_MODE_REM_SEND: - ctrl3 |= PHY_B_P_BOTH_MD; - break; - } - - /* Restart Auto-negotiation */ - ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG; - } else { - if (skge->duplex == DUPLEX_FULL) - ctrl1 |= PHY_CT_DUP_MD; - - ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */ - } - - skge_xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, ctrl2); - skge_xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, ctrl3); - - if (skge->netdev->mtu > ETH_DATA_LEN) { - ctrl4 |= PHY_B_PEC_HIGH_LA; - ctrl5 |= PHY_B_AC_LONG_PACK; - - skge_xm_phy_write(hw, port,PHY_BCOM_AUX_CTRL, ctrl5); - } - - skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ctrl4); - skge_xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl1); - break; - } - spin_unlock_bh(&hw->phy_lock); - - /* Clear MIB counters */ - skge_xm_write16(hw, port, XM_STAT_CMD, - XM_SC_CLR_RXC | XM_SC_CLR_TXC); - /* Clear two times according to Errata #3 */ - skge_xm_write16(hw, port, XM_STAT_CMD, - XM_SC_CLR_RXC | XM_SC_CLR_TXC); - - /* Start polling for link status */ - mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); } static void genesis_stop(struct skge_port *skge) { struct skge_hw *hw = skge->hw; int port = skge->port; + u32 reg; /* Clear Tx packet arbiter timeout IRQ */ skge_write16(hw, B3_PA_CTRL, @@ -1304,33 +1340,30 @@ static void genesis_stop(struct skge_port *skge) * If the transfer stucks at the MAC the STOP command will not * terminate if we don't flush the XMAC's transmit FIFO ! */ - skge_xm_write32(hw, port, XM_MODE, - skge_xm_read32(hw, port, XM_MODE)|XM_MD_FTF); + xm_write32(hw, port, XM_MODE, + xm_read32(hw, port, XM_MODE)|XM_MD_FTF); /* Reset the MAC */ - skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST); + skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST); /* For external PHYs there must be special handling */ - if (hw->phy_type != SK_PHY_XMAC) { - u32 reg = skge_read32(hw, B2_GP_IO); - - if (port == 0) { - reg |= GP_DIR_0; - reg &= ~GP_IO_0; - } else { - reg |= GP_DIR_2; - reg &= ~GP_IO_2; - } - skge_write32(hw, B2_GP_IO, reg); - skge_read32(hw, B2_GP_IO); + reg = skge_read32(hw, B2_GP_IO); + if (port == 0) { + reg |= GP_DIR_0; + reg &= ~GP_IO_0; + } else { + reg |= GP_DIR_2; + reg &= ~GP_IO_2; } + skge_write32(hw, B2_GP_IO, reg); + skge_read32(hw, B2_GP_IO); - skge_xm_write16(hw, port, XM_MMU_CMD, - skge_xm_read16(hw, port, XM_MMU_CMD) + xm_write16(hw, port, XM_MMU_CMD, + xm_read16(hw, port, XM_MMU_CMD) & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX)); - skge_xm_read16(hw, port, XM_MMU_CMD); + xm_read16(hw, port, XM_MMU_CMD); } @@ -1341,11 +1374,11 @@ static void genesis_get_stats(struct skge_port *skge, u64 *data) int i; unsigned long timeout = jiffies + HZ; - skge_xm_write16(hw, port, + xm_write16(hw, port, XM_STAT_CMD, XM_SC_SNP_TXC | XM_SC_SNP_RXC); /* wait for update to complete */ - while (skge_xm_read16(hw, port, XM_STAT_CMD) + while (xm_read16(hw, port, XM_STAT_CMD) & (XM_SC_SNP_TXC | XM_SC_SNP_RXC)) { if (time_after(jiffies, timeout)) break; @@ -1353,68 +1386,60 @@ static void genesis_get_stats(struct skge_port *skge, u64 *data) } /* special case for 64 bit octet counter */ - data[0] = (u64) skge_xm_read32(hw, port, XM_TXO_OK_HI) << 32 - | skge_xm_read32(hw, port, XM_TXO_OK_LO); - data[1] = (u64) skge_xm_read32(hw, port, XM_RXO_OK_HI) << 32 - | skge_xm_read32(hw, port, XM_RXO_OK_LO); + data[0] = (u64) xm_read32(hw, port, XM_TXO_OK_HI) << 32 + | xm_read32(hw, port, XM_TXO_OK_LO); + data[1] = (u64) xm_read32(hw, port, XM_RXO_OK_HI) << 32 + | xm_read32(hw, port, XM_RXO_OK_LO); for (i = 2; i < ARRAY_SIZE(skge_stats); i++) - data[i] = skge_xm_read32(hw, port, skge_stats[i].xmac_offset); + data[i] = xm_read32(hw, port, skge_stats[i].xmac_offset); } static void genesis_mac_intr(struct skge_hw *hw, int port) { struct skge_port *skge = netdev_priv(hw->dev[port]); - u16 status = skge_xm_read16(hw, port, XM_ISRC); - - pr_debug("genesis_intr status %x\n", status); - if (hw->phy_type == SK_PHY_XMAC) { - /* LInk down, start polling for state change */ - if (status & XM_IS_INP_ASS) { - skge_xm_write16(hw, port, XM_IMSK, - skge_xm_read16(hw, port, XM_IMSK) | XM_IS_INP_ASS); - mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); - } - else if (status & XM_IS_AND) - mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); - } + u16 status = xm_read16(hw, port, XM_ISRC); + + if (netif_msg_intr(skge)) + printk(KERN_DEBUG PFX "%s: mac interrupt status 0x%x\n", + skge->netdev->name, status); if (status & XM_IS_TXF_UR) { - skge_xm_write32(hw, port, XM_MODE, XM_MD_FTF); + xm_write32(hw, port, XM_MODE, XM_MD_FTF); ++skge->net_stats.tx_fifo_errors; } if (status & XM_IS_RXF_OV) { - skge_xm_write32(hw, port, XM_MODE, XM_MD_FRF); + xm_write32(hw, port, XM_MODE, XM_MD_FRF); ++skge->net_stats.rx_fifo_errors; } } -static void skge_gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val) +static void gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val) { int i; - skge_gma_write16(hw, port, GM_SMI_DATA, val); - skge_gma_write16(hw, port, GM_SMI_CTRL, + gma_write16(hw, port, GM_SMI_DATA, val); + gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(hw->phy_addr) | GM_SMI_CT_REG_AD(reg)); for (i = 0; i < PHY_RETRIES; i++) { udelay(1); - if (!(skge_gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY)) + if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY)) break; } } -static u16 skge_gm_phy_read(struct skge_hw *hw, int port, u16 reg) +static u16 gm_phy_read(struct skge_hw *hw, int port, u16 reg) { int i; - skge_gma_write16(hw, port, GM_SMI_CTRL, + gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(hw->phy_addr) | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD); for (i = 0; i < PHY_RETRIES; i++) { udelay(1); - if (skge_gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) + if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) goto ready; } @@ -1422,24 +1447,7 @@ static u16 skge_gm_phy_read(struct skge_hw *hw, int port, u16 reg) hw->dev[port]->name); return 0; ready: - return skge_gma_read16(hw, port, GM_SMI_DATA); -} - -static void genesis_link_down(struct skge_port *skge) -{ - struct skge_hw *hw = skge->hw; - int port = skge->port; - - pr_debug("genesis_link_down\n"); - - skge_xm_write16(hw, port, XM_MMU_CMD, - skge_xm_read16(hw, port, XM_MMU_CMD) - & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX)); - - /* dummy read to ensure writing */ - (void) skge_xm_read16(hw, port, XM_MMU_CMD); - - skge_link_down(skge); + return gma_read16(hw, port, GM_SMI_DATA); } static void genesis_link_up(struct skge_port *skge) @@ -1450,7 +1458,7 @@ static void genesis_link_up(struct skge_port *skge) u32 mode, msk; pr_debug("genesis_link_up\n"); - cmd = skge_xm_read16(hw, port, XM_MMU_CMD); + cmd = xm_read16(hw, port, XM_MMU_CMD); /* * enabling pause frame reception is required for 1000BT @@ -1458,14 +1466,15 @@ static void genesis_link_up(struct skge_port *skge) */ if (skge->flow_control == FLOW_MODE_NONE || skge->flow_control == FLOW_MODE_LOC_SEND) + /* Disable Pause Frame Reception */ cmd |= XM_MMU_IGN_PF; else /* Enable Pause Frame Reception */ cmd &= ~XM_MMU_IGN_PF; - skge_xm_write16(hw, port, XM_MMU_CMD, cmd); + xm_write16(hw, port, XM_MMU_CMD, cmd); - mode = skge_xm_read32(hw, port, XM_MODE); + mode = xm_read32(hw, port, XM_MODE); if (skge->flow_control == FLOW_MODE_SYMMETRIC || skge->flow_control == FLOW_MODE_LOC_SEND) { /* @@ -1479,10 +1488,10 @@ static void genesis_link_up(struct skge_port *skge) /* XM_PAUSE_DA = '010000C28001' (default) */ /* XM_MAC_PTIME = 0xffff (maximum) */ /* remember this value is defined in big endian (!) */ - skge_xm_write16(hw, port, XM_MAC_PTIME, 0xffff); + xm_write16(hw, port, XM_MAC_PTIME, 0xffff); mode |= XM_PAUSE_MODE; - skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_ENA_PAUSE); + skge_write16(hw, SK_REG(port, RX_MFF_CTRL1), MFF_ENA_PAUSE); } else { /* * disable pause frame generation is required for 1000BT @@ -1491,125 +1500,68 @@ static void genesis_link_up(struct skge_port *skge) /* Disable Pause Mode in Mode Register */ mode &= ~XM_PAUSE_MODE; - skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_DIS_PAUSE); + skge_write16(hw, SK_REG(port, RX_MFF_CTRL1), MFF_DIS_PAUSE); } - skge_xm_write32(hw, port, XM_MODE, mode); + xm_write32(hw, port, XM_MODE, mode); msk = XM_DEF_MSK; - if (hw->phy_type != SK_PHY_XMAC) - msk |= XM_IS_INP_ASS; /* disable GP0 interrupt bit */ + /* disable GP0 interrupt bit for external Phy */ + msk |= XM_IS_INP_ASS; - skge_xm_write16(hw, port, XM_IMSK, msk); - skge_xm_read16(hw, port, XM_ISRC); + xm_write16(hw, port, XM_IMSK, msk); + xm_read16(hw, port, XM_ISRC); /* get MMU Command Reg. */ - cmd = skge_xm_read16(hw, port, XM_MMU_CMD); - if (hw->phy_type != SK_PHY_XMAC && skge->duplex == DUPLEX_FULL) + cmd = xm_read16(hw, port, XM_MMU_CMD); + if (skge->duplex == DUPLEX_FULL) cmd |= XM_MMU_GMII_FD; - if (hw->phy_type == SK_PHY_BCOM) { - /* - * Workaround BCOM Errata (#10523) for all BCom Phys - * Enable Power Management after link up - */ - skge_xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, - skge_xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL) - & ~PHY_B_AC_DIS_PM); - skge_xm_phy_write(hw, port, PHY_BCOM_INT_MASK, - PHY_B_DEF_MSK); - } + /* + * Workaround BCOM Errata (#10523) for all BCom Phys + * Enable Power Management after link up + */ + xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, + xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL) + & ~PHY_B_AC_DIS_PM); + xm_phy_write(hw, port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK); /* enable Rx/Tx */ - skge_xm_write16(hw, port, XM_MMU_CMD, + xm_write16(hw, port, XM_MMU_CMD, cmd | XM_MMU_ENA_RX | XM_MMU_ENA_TX); skge_link_up(skge); } -static void genesis_bcom_intr(struct skge_port *skge) +static inline void bcom_phy_intr(struct skge_port *skge) { struct skge_hw *hw = skge->hw; int port = skge->port; - u16 stat = skge_xm_phy_read(hw, port, PHY_BCOM_INT_STAT); + u16 isrc; + + isrc = xm_phy_read(hw, port, PHY_BCOM_INT_STAT); + if (netif_msg_intr(skge)) + printk(KERN_DEBUG PFX "%s: phy interrupt status 0x%x\n", + skge->netdev->name, isrc); - pr_debug("genesis_bcom intr stat=%x\n", stat); + if (isrc & PHY_B_IS_PSE) + printk(KERN_ERR PFX "%s: uncorrectable pair swap error\n", + hw->dev[port]->name); /* Workaround BCom Errata: * enable and disable loopback mode if "NO HCD" occurs. */ - if (stat & PHY_B_IS_NO_HDCL) { - u16 ctrl = skge_xm_phy_read(hw, port, PHY_BCOM_CTRL); - skge_xm_phy_write(hw, port, PHY_BCOM_CTRL, + if (isrc & PHY_B_IS_NO_HDCL) { + u16 ctrl = xm_phy_read(hw, port, PHY_BCOM_CTRL); + xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl | PHY_CT_LOOP); - skge_xm_phy_write(hw, port, PHY_BCOM_CTRL, + xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl & ~PHY_CT_LOOP); } - stat = skge_xm_phy_read(hw, port, PHY_BCOM_STAT); - if (stat & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) { - u16 aux = skge_xm_phy_read(hw, port, PHY_BCOM_AUX_STAT); - if ( !(aux & PHY_B_AS_LS) && netif_carrier_ok(skge->netdev)) - genesis_link_down(skge); - - else if (stat & PHY_B_IS_LST_CHANGE) { - if (aux & PHY_B_AS_AN_C) { - switch (aux & PHY_B_AS_AN_RES_MSK) { - case PHY_B_RES_1000FD: - skge->duplex = DUPLEX_FULL; - break; - case PHY_B_RES_1000HD: - skge->duplex = DUPLEX_HALF; - break; - } - - switch (aux & PHY_B_AS_PAUSE_MSK) { - case PHY_B_AS_PAUSE_MSK: - skge->flow_control = FLOW_MODE_SYMMETRIC; - break; - case PHY_B_AS_PRR: - skge->flow_control = FLOW_MODE_REM_SEND; - break; - case PHY_B_AS_PRT: - skge->flow_control = FLOW_MODE_LOC_SEND; - break; - default: - skge->flow_control = FLOW_MODE_NONE; - } - skge->speed = SPEED_1000; - } - genesis_link_up(skge); - } - else - mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); - } -} + if (isrc & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) + bcom_check_link(hw, port); -/* Perodic poll of phy status to check for link transistion */ -static void skge_link_timer(unsigned long __arg) -{ - struct skge_port *skge = (struct skge_port *) __arg; - struct skge_hw *hw = skge->hw; - int port = skge->port; - - if (hw->chip_id != CHIP_ID_GENESIS || !netif_running(skge->netdev)) - return; - - spin_lock_bh(&hw->phy_lock); - if (hw->phy_type == SK_PHY_BCOM) - genesis_bcom_intr(skge); - else { - int i; - for (i = 0; i < 3; i++) - if (skge_xm_read16(hw, port, XM_ISRC) & XM_IS_INP_ASS) - break; - - if (i == 3) - mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); - else - genesis_link_up(skge); - } - spin_unlock_bh(&hw->phy_lock); } /* Marvell Phy Initailization */ @@ -1621,31 +1573,27 @@ static void yukon_init(struct skge_hw *hw, int port) pr_debug("yukon_init\n"); if (skge->autoneg == AUTONEG_ENABLE) { - u16 ectrl = skge_gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); + u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | PHY_M_EC_MAC_S_MSK); ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ); - /* on PHY 88E1111 there is a change for downshift control */ - if (hw->chip_id == CHIP_ID_YUKON_EC) - ectrl |= PHY_M_EC_M_DSC_2(0) | PHY_M_EC_DOWN_S_ENA; - else - ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); + ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); - skge_gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl); + gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl); } - ctrl = skge_gm_phy_read(hw, port, PHY_MARV_CTRL); + ctrl = gm_phy_read(hw, port, PHY_MARV_CTRL); if (skge->autoneg == AUTONEG_DISABLE) ctrl &= ~PHY_CT_ANE; ctrl |= PHY_CT_RESET; - skge_gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); + gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); ctrl = 0; ct1000 = 0; - adv = PHY_SEL_TYPE; + adv = PHY_AN_CSMA; if (skge->autoneg == AUTONEG_ENABLE) { if (iscopper(hw)) { @@ -1661,41 +1609,12 @@ static void yukon_init(struct skge_hw *hw, int port) adv |= PHY_M_AN_10_FD; if (skge->advertising & ADVERTISED_10baseT_Half) adv |= PHY_M_AN_10_HD; - - /* Set Flow-control capabilities */ - switch (skge->flow_control) { - case FLOW_MODE_NONE: - adv |= PHY_B_P_NO_PAUSE; - break; - case FLOW_MODE_LOC_SEND: - adv |= PHY_B_P_ASYM_MD; - break; - case FLOW_MODE_SYMMETRIC: - adv |= PHY_B_P_SYM_MD; - break; - case FLOW_MODE_REM_SEND: - adv |= PHY_B_P_BOTH_MD; - break; - } - } else { /* special defines for FIBER (88E1011S only) */ + } else /* special defines for FIBER (88E1011S only) */ adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD; - /* Set Flow-control capabilities */ - switch (skge->flow_control) { - case FLOW_MODE_NONE: - adv |= PHY_M_P_NO_PAUSE_X; - break; - case FLOW_MODE_LOC_SEND: - adv |= PHY_M_P_ASYM_MD_X; - break; - case FLOW_MODE_SYMMETRIC: - adv |= PHY_M_P_SYM_MD_X; - break; - case FLOW_MODE_REM_SEND: - adv |= PHY_M_P_BOTH_MD_X; - break; - } - } + /* Set Flow-control capabilities */ + adv |= phy_pause_map[skge->flow_control]; + /* Restart Auto-negotiation */ ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG; } else { @@ -1717,36 +1636,23 @@ static void yukon_init(struct skge_hw *hw, int port) ctrl |= PHY_CT_RESET; } - if (hw->chip_id != CHIP_ID_YUKON_FE) - skge_gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); + gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); - skge_gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv); - skge_gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); + gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv); + gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); /* Setup Phy LED's */ ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS); ledover = 0; - if (hw->chip_id == CHIP_ID_YUKON_FE) { - /* on 88E3082 these bits are at 11..9 (shifted left) */ - ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1; - - skge_gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, - ((skge_gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR) - - & ~PHY_M_FELP_LED1_MSK) - | PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL))); - } else { - /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ - ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; + ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; - /* turn off the Rx LED (LED_RX) */ - ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); - } + /* turn off the Rx LED (LED_RX) */ + ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); /* disable blink mode (LED_DUPLEX) on collisions */ ctrl |= PHY_M_LEDC_DP_CTRL; - skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); if (skge->autoneg == AUTONEG_DISABLE || skge->speed == SPEED_100) { /* turn on 100 Mbps LED (LED_LINK100) */ @@ -1754,25 +1660,25 @@ static void yukon_init(struct skge_hw *hw, int port) } if (ledover) - skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); /* Enable phy interrupt on autonegotiation complete (or link up) */ if (skge->autoneg == AUTONEG_ENABLE) - skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); + gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); else - skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); + gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); } static void yukon_reset(struct skge_hw *hw, int port) { - skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);/* disable PHY IRQs */ - skge_gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */ - skge_gma_write16(hw, port, GM_MC_ADDR_H2, 0); - skge_gma_write16(hw, port, GM_MC_ADDR_H3, 0); - skge_gma_write16(hw, port, GM_MC_ADDR_H4, 0); + gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);/* disable PHY IRQs */ + gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */ + gma_write16(hw, port, GM_MC_ADDR_H2, 0); + gma_write16(hw, port, GM_MC_ADDR_H3, 0); + gma_write16(hw, port, GM_MC_ADDR_H4, 0); - skge_gma_write16(hw, port, GM_RX_CTRL, - skge_gma_read16(hw, port, GM_RX_CTRL) + gma_write16(hw, port, GM_RX_CTRL, + gma_read16(hw, port, GM_RX_CTRL) | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); } @@ -1785,17 +1691,17 @@ static void yukon_mac_init(struct skge_hw *hw, int port) /* WA code for COMA mode -- set PHY reset */ if (hw->chip_id == CHIP_ID_YUKON_LITE && - chip_rev(hw) == CHIP_REV_YU_LITE_A3) + hw->chip_rev == CHIP_REV_YU_LITE_A3) skge_write32(hw, B2_GP_IO, (skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9)); /* hard reset */ - skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), GPC_RST_SET); - skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_RST_SET); + skge_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); + skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET); /* WA code for COMA mode -- clear PHY reset */ if (hw->chip_id == CHIP_ID_YUKON_LITE && - chip_rev(hw) == CHIP_REV_YU_LITE_A3) + hw->chip_rev == CHIP_REV_YU_LITE_A3) skge_write32(hw, B2_GP_IO, (skge_read32(hw, B2_GP_IO) | GP_DIR_9) & ~GP_IO_9); @@ -1806,13 +1712,13 @@ static void yukon_mac_init(struct skge_hw *hw, int port) reg |= iscopper(hw) ? GPC_HWCFG_GMII_COP : GPC_HWCFG_GMII_FIB; /* Clear GMC reset */ - skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), reg | GPC_RST_SET); - skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), reg | GPC_RST_CLR); - skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR); + skge_write32(hw, SK_REG(port, GPHY_CTRL), reg | GPC_RST_SET); + skge_write32(hw, SK_REG(port, GPHY_CTRL), reg | GPC_RST_CLR); + skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR); if (skge->autoneg == AUTONEG_DISABLE) { reg = GM_GPCR_AU_ALL_DIS; - skge_gma_write16(hw, port, GM_GP_CTRL, - skge_gma_read16(hw, port, GM_GP_CTRL) | reg); + gma_write16(hw, port, GM_GP_CTRL, + gma_read16(hw, port, GM_GP_CTRL) | reg); switch (skge->speed) { case SPEED_1000: @@ -1828,7 +1734,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port) reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL; switch (skge->flow_control) { case FLOW_MODE_NONE: - skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); reg |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; break; case FLOW_MODE_LOC_SEND: @@ -1836,7 +1742,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port) reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; } - skge_gma_write16(hw, port, GM_GP_CTRL, reg); + gma_write16(hw, port, GM_GP_CTRL, reg); skge_read16(hw, GMAC_IRQ_SRC); spin_lock_bh(&hw->phy_lock); @@ -1844,25 +1750,25 @@ static void yukon_mac_init(struct skge_hw *hw, int port) spin_unlock_bh(&hw->phy_lock); /* MIB clear */ - reg = skge_gma_read16(hw, port, GM_PHY_ADDR); - skge_gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR); + reg = gma_read16(hw, port, GM_PHY_ADDR); + gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR); for (i = 0; i < GM_MIB_CNT_SIZE; i++) - skge_gma_read16(hw, port, GM_MIB_CNT_BASE + 8*i); - skge_gma_write16(hw, port, GM_PHY_ADDR, reg); + gma_read16(hw, port, GM_MIB_CNT_BASE + 8*i); + gma_write16(hw, port, GM_PHY_ADDR, reg); /* transmit control */ - skge_gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF)); + gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF)); /* receive control reg: unicast + multicast + no FCS */ - skge_gma_write16(hw, port, GM_RX_CTRL, + gma_write16(hw, port, GM_RX_CTRL, GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA); /* transmit flow control */ - skge_gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff); + gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff); /* transmit parameter */ - skge_gma_write16(hw, port, GM_TX_PARAM, + gma_write16(hw, port, GM_TX_PARAM, TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) | TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) | TX_IPG_JAM_DATA(TX_IPG_JAM_DEF)); @@ -1872,33 +1778,33 @@ static void yukon_mac_init(struct skge_hw *hw, int port) if (hw->dev[port]->mtu > 1500) reg |= GM_SMOD_JUMBO_ENA; - skge_gma_write16(hw, port, GM_SERIAL_MODE, reg); + gma_write16(hw, port, GM_SERIAL_MODE, reg); /* physical address: used for pause frames */ - skge_gm_set_addr(hw, port, GM_SRC_ADDR_1L, addr); + gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr); /* virtual address for data */ - skge_gm_set_addr(hw, port, GM_SRC_ADDR_2L, addr); + gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr); /* enable interrupt mask for counter overflows */ - skge_gma_write16(hw, port, GM_TX_IRQ_MSK, 0); - skge_gma_write16(hw, port, GM_RX_IRQ_MSK, 0); - skge_gma_write16(hw, port, GM_TR_IRQ_MSK, 0); + gma_write16(hw, port, GM_TX_IRQ_MSK, 0); + gma_write16(hw, port, GM_RX_IRQ_MSK, 0); + gma_write16(hw, port, GM_TR_IRQ_MSK, 0); /* Initialize Mac Fifo */ /* Configure Rx MAC FIFO */ - skge_write16(hw, SKGEMAC_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK); + skge_write16(hw, SK_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK); reg = GMF_OPER_ON | GMF_RX_F_FL_ON; if (hw->chip_id == CHIP_ID_YUKON_LITE && - chip_rev(hw) == CHIP_REV_YU_LITE_A3) + hw->chip_rev == CHIP_REV_YU_LITE_A3) reg &= ~GMF_RX_F_FL_ON; - skge_write8(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); - skge_write16(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), reg); - skge_write16(hw, SKGEMAC_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); + skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); + skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg); + skge_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); /* Configure Tx MAC FIFO */ - skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); - skge_write16(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); + skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); + skge_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); } static void yukon_stop(struct skge_port *skge) @@ -1907,19 +1813,19 @@ static void yukon_stop(struct skge_port *skge) int port = skge->port; if (hw->chip_id == CHIP_ID_YUKON_LITE && - chip_rev(hw) == CHIP_REV_YU_LITE_A3) { + hw->chip_rev == CHIP_REV_YU_LITE_A3) { skge_write32(hw, B2_GP_IO, skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9); } - skge_gma_write16(hw, port, GM_GP_CTRL, - skge_gma_read16(hw, port, GM_GP_CTRL) + gma_write16(hw, port, GM_GP_CTRL, + gma_read16(hw, port, GM_GP_CTRL) & ~(GM_GPCR_RX_ENA|GM_GPCR_RX_ENA)); - skge_gma_read16(hw, port, GM_GP_CTRL); + gma_read16(hw, port, GM_GP_CTRL); /* set GPHY Control reset */ - skge_gma_write32(hw, port, GPHY_CTRL, GPC_RST_SET); - skge_gma_write32(hw, port, GMAC_CTRL, GMC_RST_SET); + gma_write32(hw, port, GPHY_CTRL, GPC_RST_SET); + gma_write32(hw, port, GMAC_CTRL, GMC_RST_SET); } static void yukon_get_stats(struct skge_port *skge, u64 *data) @@ -1928,39 +1834,40 @@ static void yukon_get_stats(struct skge_port *skge, u64 *data) int port = skge->port; int i; - data[0] = (u64) skge_gma_read32(hw, port, GM_TXO_OK_HI) << 32 - | skge_gma_read32(hw, port, GM_TXO_OK_LO); - data[1] = (u64) skge_gma_read32(hw, port, GM_RXO_OK_HI) << 32 - | skge_gma_read32(hw, port, GM_RXO_OK_LO); + data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32 + | gma_read32(hw, port, GM_TXO_OK_LO); + data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32 + | gma_read32(hw, port, GM_RXO_OK_LO); for (i = 2; i < ARRAY_SIZE(skge_stats); i++) - data[i] = skge_gma_read32(hw, port, + data[i] = gma_read32(hw, port, skge_stats[i].gma_offset); } static void yukon_mac_intr(struct skge_hw *hw, int port) { - struct skge_port *skge = netdev_priv(hw->dev[port]); - u8 status = skge_read8(hw, SKGEMAC_REG(port, GMAC_IRQ_SRC)); + struct net_device *dev = hw->dev[port]; + struct skge_port *skge = netdev_priv(dev); + u8 status = skge_read8(hw, SK_REG(port, GMAC_IRQ_SRC)); + + if (netif_msg_intr(skge)) + printk(KERN_DEBUG PFX "%s: mac interrupt status 0x%x\n", + dev->name, status); - pr_debug("yukon_intr status %x\n", status); if (status & GM_IS_RX_FF_OR) { ++skge->net_stats.rx_fifo_errors; - skge_gma_write8(hw, port, RX_GMF_CTRL_T, GMF_CLI_RX_FO); + gma_write8(hw, port, RX_GMF_CTRL_T, GMF_CLI_RX_FO); } if (status & GM_IS_TX_FF_UR) { ++skge->net_stats.tx_fifo_errors; - skge_gma_write8(hw, port, TX_GMF_CTRL_T, GMF_CLI_TX_FU); + gma_write8(hw, port, TX_GMF_CTRL_T, GMF_CLI_TX_FU); } } static u16 yukon_speed(const struct skge_hw *hw, u16 aux) { - if (hw->chip_id == CHIP_ID_YUKON_FE) - return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10; - - switch(aux & PHY_M_PS_SPEED_MSK) { + switch (aux & PHY_M_PS_SPEED_MSK) { case PHY_M_PS_SPEED_1000: return SPEED_1000; case PHY_M_PS_SPEED_100: @@ -1981,15 +1888,15 @@ static void yukon_link_up(struct skge_port *skge) /* Enable Transmit FIFO Underrun */ skge_write8(hw, GMAC_IRQ_MSK, GMAC_DEF_MSK); - reg = skge_gma_read16(hw, port, GM_GP_CTRL); + reg = gma_read16(hw, port, GM_GP_CTRL); if (skge->duplex == DUPLEX_FULL || skge->autoneg == AUTONEG_ENABLE) reg |= GM_GPCR_DUP_FULL; /* enable Rx/Tx */ reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; - skge_gma_write16(hw, port, GM_GP_CTRL, reg); + gma_write16(hw, port, GM_GP_CTRL, reg); - skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); + gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); skge_link_up(skge); } @@ -1999,16 +1906,15 @@ static void yukon_link_down(struct skge_port *skge) int port = skge->port; pr_debug("yukon_link_down\n"); - skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); - skge_gm_phy_write(hw, port, GM_GP_CTRL, - skge_gm_phy_read(hw, port, GM_GP_CTRL) + gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); + gm_phy_write(hw, port, GM_GP_CTRL, + gm_phy_read(hw, port, GM_GP_CTRL) & ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA)); - if (hw->chip_id != CHIP_ID_YUKON_FE && - skge->flow_control == FLOW_MODE_REM_SEND) { + if (skge->flow_control == FLOW_MODE_REM_SEND) { /* restore Asymmetric Pause bit */ - skge_gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, - skge_gm_phy_read(hw, port, + gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, + gm_phy_read(hw, port, PHY_MARV_AUNE_ADV) | PHY_M_AN_ASP); @@ -2027,20 +1933,21 @@ static void yukon_phy_intr(struct skge_port *skge) const char *reason = NULL; u16 istatus, phystat; - istatus = skge_gm_phy_read(hw, port, PHY_MARV_INT_STAT); - phystat = skge_gm_phy_read(hw, port, PHY_MARV_PHY_STAT); - pr_debug("yukon phy intr istat=%x phy_stat=%x\n", istatus, phystat); + istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT); + phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT); + + if (netif_msg_intr(skge)) + printk(KERN_DEBUG PFX "%s: phy interrupt status 0x%x 0x%x\n", + skge->netdev->name, istatus, phystat); if (istatus & PHY_M_IS_AN_COMPL) { - if (skge_gm_phy_read(hw, port, PHY_MARV_AUNE_LP) + if (gm_phy_read(hw, port, PHY_MARV_AUNE_LP) & PHY_M_AN_RF) { reason = "remote fault"; goto failed; } - if (!(hw->chip_id == CHIP_ID_YUKON_FE || hw->chip_id == CHIP_ID_YUKON_EC) - && (skge_gm_phy_read(hw, port, PHY_MARV_1000T_STAT) - & PHY_B_1000S_MSF)) { + if (gm_phy_read(hw, port, PHY_MARV_1000T_STAT) & PHY_B_1000S_MSF) { reason = "master/slave fault"; goto failed; } @@ -2054,10 +1961,6 @@ static void yukon_phy_intr(struct skge_port *skge) ? DUPLEX_FULL : DUPLEX_HALF; skge->speed = yukon_speed(hw, phystat); - /* Tx & Rx Pause Enabled bits are at 9..8 */ - if (hw->chip_id == CHIP_ID_YUKON_XL) - phystat >>= 6; - /* We are using IEEE 802.3z/D5.0 Table 37-4 */ switch (phystat & PHY_M_PS_PAUSE_MSK) { case PHY_M_PS_PAUSE_MSK: @@ -2075,9 +1978,9 @@ static void yukon_phy_intr(struct skge_port *skge) if (skge->flow_control == FLOW_MODE_NONE || (skge->speed < SPEED_1000 && skge->duplex == DUPLEX_HALF)) - skge_write8(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); else - skge_write8(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_ON); + skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); yukon_link_up(skge); return; } @@ -2161,6 +2064,12 @@ static int skge_up(struct net_device *dev) if (netif_msg_ifup(skge)) printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); + if (dev->mtu > RX_BUF_SIZE) + skge->rx_buf_size = dev->mtu + ETH_HLEN + NET_IP_ALIGN; + else + skge->rx_buf_size = RX_BUF_SIZE; + + rx_size = skge->rx_ring.count * sizeof(struct skge_rx_desc); tx_size = skge->tx_ring.count * sizeof(struct skge_tx_desc); skge->mem_size = tx_size + rx_size; @@ -2173,7 +2082,8 @@ static int skge_up(struct net_device *dev) if ((err = skge_ring_alloc(&skge->rx_ring, skge->mem, skge->dma))) goto free_pci_mem; - if (skge_rx_fill(skge)) + err = skge_rx_fill(skge); + if (err) goto free_rx_ring; if ((err = skge_ring_alloc(&skge->tx_ring, skge->mem + rx_size, @@ -2182,6 +2092,10 @@ static int skge_up(struct net_device *dev) skge->tx_avail = skge->tx_ring.count - 1; + /* Enable IRQ from port */ + hw->intr_mask |= portirqmask[port]; + skge_write32(hw, B0_IMSK, hw->intr_mask); + /* Initialze MAC */ if (hw->chip_id == CHIP_ID_GENESIS) genesis_mac_init(hw, port); @@ -2189,7 +2103,7 @@ static int skge_up(struct net_device *dev) yukon_mac_init(hw, port); /* Configure RAMbuffers */ - chunk = hw->ram_size / (isdualport(hw) ? 4 : 2); + chunk = hw->ram_size / ((hw->ports + 1)*2); ram_addr = hw->ram_offset + 2 * chunk * port; skge_ramset(hw, rxqaddr[port], ram_addr, chunk); @@ -2227,7 +2141,6 @@ static int skge_down(struct net_device *dev) netif_stop_queue(dev); del_timer_sync(&skge->led_blink); - del_timer_sync(&skge->link_check); /* Stop transmitter */ skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP); @@ -2240,12 +2153,12 @@ static int skge_down(struct net_device *dev) yukon_stop(skge); /* Disable Force Sync bit and Enable Alloc bit */ - skge_write8(hw, SKGEMAC_REG(port, TXA_CTRL), + skge_write8(hw, SK_REG(port, TXA_CTRL), TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); /* Stop Interval Timer and Limit Counter of Tx Arbiter */ - skge_write32(hw, SKGEMAC_REG(port, TXA_ITI_INI), 0L); - skge_write32(hw, SKGEMAC_REG(port, TXA_LIM_INI), 0L); + skge_write32(hw, SK_REG(port, TXA_ITI_INI), 0L); + skge_write32(hw, SK_REG(port, TXA_LIM_INI), 0L); /* Reset PCI FIFO */ skge_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_SET_RESET); @@ -2260,13 +2173,13 @@ static int skge_down(struct net_device *dev) skge_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_SET_RESET); if (hw->chip_id == CHIP_ID_GENESIS) { - skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_RST_SET); - skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_RST_SET); - skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_STOP); - skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_STOP); + skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_RST_SET); + skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_RST_SET); + skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_STOP); + skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_STOP); } else { - skge_write8(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); - skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); + skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); + skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); } /* turn off led's */ @@ -2299,10 +2212,10 @@ static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev) local_irq_save(flags); if (!spin_trylock(&skge->tx_lock)) { - /* Collision - tell upper layer to requeue */ - local_irq_restore(flags); - return NETDEV_TX_LOCKED; - } + /* Collision - tell upper layer to requeue */ + local_irq_restore(flags); + return NETDEV_TX_LOCKED; + } if (unlikely(skge->tx_avail < skb_shinfo(skb)->nr_frags +1)) { netif_stop_queue(dev); @@ -2333,7 +2246,7 @@ static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev) * does. Looks like hardware is wrong? */ if (ip->protocol == IPPROTO_UDP - && chip_rev(hw) == 0 && hw->chip_id == CHIP_ID_YUKON) + && hw->chip_rev == 0 && hw->chip_id == CHIP_ID_YUKON) control = BMU_TCP_CHECK; else control = BMU_UDP_CHECK; @@ -2394,6 +2307,7 @@ static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev) static inline void skge_tx_free(struct skge_hw *hw, struct skge_element *e) { + /* This ring element can be skb or fragment */ if (e->skb) { pci_unmap_single(hw->pdev, pci_unmap_addr(e, mapaddr), @@ -2438,16 +2352,17 @@ static void skge_tx_timeout(struct net_device *dev) static int skge_change_mtu(struct net_device *dev, int new_mtu) { int err = 0; + int running = netif_running(dev); - if(new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) + if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) return -EINVAL; - dev->mtu = new_mtu; - if (netif_running(dev)) { + if (running) skge_down(dev); + dev->mtu = new_mtu; + if (running) skge_up(dev); - } return err; } @@ -2462,7 +2377,9 @@ static void genesis_set_multicast(struct net_device *dev) u32 mode; u8 filter[8]; - mode = skge_xm_read32(hw, port, XM_MODE); + pr_debug("genesis_set_multicast flags=%x count=%d\n", dev->flags, dev->mc_count); + + mode = xm_read32(hw, port, XM_MODE); mode |= XM_MD_ENA_HASH; if (dev->flags & IFF_PROMISC) mode |= XM_MD_ENA_PROM; @@ -2473,17 +2390,16 @@ static void genesis_set_multicast(struct net_device *dev) memset(filter, 0xff, sizeof(filter)); else { memset(filter, 0, sizeof(filter)); - for(i = 0; list && i < count; i++, list = list->next) { - u32 crc = crc32_le(~0, list->dmi_addr, ETH_ALEN); - u8 bit = 63 - (crc & 63); - + for (i = 0; list && i < count; i++, list = list->next) { + u32 crc, bit; + crc = ether_crc_le(ETH_ALEN, list->dmi_addr); + bit = ~crc & 0x3f; filter[bit/8] |= 1 << (bit%8); } } - skge_xm_outhash(hw, port, XM_HSM, filter); - - skge_xm_write32(hw, port, XM_MODE, mode); + xm_write32(hw, port, XM_MODE, mode); + xm_outhash(hw, port, XM_HSM, filter); } static void yukon_set_multicast(struct net_device *dev) @@ -2497,7 +2413,7 @@ static void yukon_set_multicast(struct net_device *dev) memset(filter, 0, sizeof(filter)); - reg = skge_gma_read16(hw, port, GM_RX_CTRL); + reg = gma_read16(hw, port, GM_RX_CTRL); reg |= GM_RXCR_UCF_ENA; if (dev->flags & IFF_PROMISC) /* promiscious */ @@ -2510,23 +2426,23 @@ static void yukon_set_multicast(struct net_device *dev) int i; reg |= GM_RXCR_MCF_ENA; - for(i = 0; list && i < dev->mc_count; i++, list = list->next) { + for (i = 0; list && i < dev->mc_count; i++, list = list->next) { u32 bit = ether_crc(ETH_ALEN, list->dmi_addr) & 0x3f; filter[bit/8] |= 1 << (bit%8); } } - skge_gma_write16(hw, port, GM_MC_ADDR_H1, + gma_write16(hw, port, GM_MC_ADDR_H1, (u16)filter[0] | ((u16)filter[1] << 8)); - skge_gma_write16(hw, port, GM_MC_ADDR_H2, + gma_write16(hw, port, GM_MC_ADDR_H2, (u16)filter[2] | ((u16)filter[3] << 8)); - skge_gma_write16(hw, port, GM_MC_ADDR_H3, + gma_write16(hw, port, GM_MC_ADDR_H3, (u16)filter[4] | ((u16)filter[5] << 8)); - skge_gma_write16(hw, port, GM_MC_ADDR_H4, + gma_write16(hw, port, GM_MC_ADDR_H4, (u16)filter[6] | ((u16)filter[7] << 8)); - skge_gma_write16(hw, port, GM_RX_CTRL, reg); + gma_write16(hw, port, GM_RX_CTRL, reg); } static inline int bad_phy_status(const struct skge_hw *hw, u32 status) @@ -2545,28 +2461,76 @@ static void skge_rx_error(struct skge_port *skge, int slot, printk(KERN_DEBUG PFX "%s: rx err, slot %d control 0x%x status 0x%x\n", skge->netdev->name, slot, control, status); - if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF) - || (control & BMU_BBC) > skge->netdev->mtu + VLAN_ETH_HLEN) + if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF)) skge->net_stats.rx_length_errors++; - else { - if (skge->hw->chip_id == CHIP_ID_GENESIS) { - if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR)) - skge->net_stats.rx_length_errors++; - if (status & XMR_FS_FRA_ERR) - skge->net_stats.rx_frame_errors++; - if (status & XMR_FS_FCS_ERR) - skge->net_stats.rx_crc_errors++; - } else { - if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE)) - skge->net_stats.rx_length_errors++; - if (status & GMR_FS_FRAGMENT) - skge->net_stats.rx_frame_errors++; - if (status & GMR_FS_CRC_ERR) - skge->net_stats.rx_crc_errors++; + else if (skge->hw->chip_id == CHIP_ID_GENESIS) { + if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR)) + skge->net_stats.rx_length_errors++; + if (status & XMR_FS_FRA_ERR) + skge->net_stats.rx_frame_errors++; + if (status & XMR_FS_FCS_ERR) + skge->net_stats.rx_crc_errors++; + } else { + if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE)) + skge->net_stats.rx_length_errors++; + if (status & GMR_FS_FRAGMENT) + skge->net_stats.rx_frame_errors++; + if (status & GMR_FS_CRC_ERR) + skge->net_stats.rx_crc_errors++; + } +} + +/* Get receive buffer from descriptor. + * Handles copy of small buffers and reallocation failures + */ +static inline struct sk_buff *skge_rx_get(struct skge_port *skge, + struct skge_element *e, + unsigned int len) +{ + struct sk_buff *nskb, *skb; + + if (len < RX_COPY_THRESHOLD) { + nskb = skge_rx_alloc(skge->netdev, len + NET_IP_ALIGN); + if (unlikely(!nskb)) + return NULL; + + pci_dma_sync_single_for_cpu(skge->hw->pdev, + pci_unmap_addr(e, mapaddr), + len, PCI_DMA_FROMDEVICE); + memcpy(nskb->data, e->skb->data, len); + pci_dma_sync_single_for_device(skge->hw->pdev, + pci_unmap_addr(e, mapaddr), + len, PCI_DMA_FROMDEVICE); + + if (skge->rx_csum) { + struct skge_rx_desc *rd = e->desc; + nskb->csum = le16_to_cpu(rd->csum2); + nskb->ip_summed = CHECKSUM_HW; } + skge_rx_reuse(e, skge->rx_buf_size); + return nskb; + } else { + nskb = skge_rx_alloc(skge->netdev, skge->rx_buf_size); + if (unlikely(!nskb)) + return NULL; + + pci_unmap_single(skge->hw->pdev, + pci_unmap_addr(e, mapaddr), + pci_unmap_len(e, maplen), + PCI_DMA_FROMDEVICE); + skb = e->skb; + if (skge->rx_csum) { + struct skge_rx_desc *rd = e->desc; + skb->csum = le16_to_cpu(rd->csum2); + skb->ip_summed = CHECKSUM_HW; + } + + skge_rx_setup(skge, e, nskb, skge->rx_buf_size); + return skb; } } + static int skge_poll(struct net_device *dev, int *budget) { struct skge_port *skge = netdev_priv(dev); @@ -2575,13 +2539,12 @@ static int skge_poll(struct net_device *dev, int *budget) struct skge_element *e; unsigned int to_do = min(dev->quota, *budget); unsigned int work_done = 0; - int done; - static const u32 irqmask[] = { IS_PORT_1, IS_PORT_2 }; - for (e = ring->to_clean; e != ring->to_use && work_done < to_do; - e = e->next) { + pr_debug("skge_poll\n"); + + for (e = ring->to_clean; work_done < to_do; e = e->next) { struct skge_rx_desc *rd = e->desc; - struct sk_buff *skb = e->skb; + struct sk_buff *skb; u32 control, len, status; rmb(); @@ -2590,19 +2553,12 @@ static int skge_poll(struct net_device *dev, int *budget) break; len = control & BMU_BBC; - e->skb = NULL; - - pci_unmap_single(hw->pdev, - pci_unmap_addr(e, mapaddr), - pci_unmap_len(e, maplen), - PCI_DMA_FROMDEVICE); - status = rd->status; - if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF) - || len > dev->mtu + VLAN_ETH_HLEN - || bad_phy_status(hw, status)) { + + if (unlikely((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF) + || bad_phy_status(hw, status))) { skge_rx_error(skge, e - ring->start, control, status); - dev_kfree_skb(skb); + skge_rx_reuse(e, skge->rx_buf_size); continue; } @@ -2610,43 +2566,37 @@ static int skge_poll(struct net_device *dev, int *budget) printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n", dev->name, e - ring->start, rd->status, len); - skb_put(skb, len); - skb->protocol = eth_type_trans(skb, dev); - - if (skge->rx_csum) { - skb->csum = le16_to_cpu(rd->csum2); - skb->ip_summed = CHECKSUM_HW; - } + skb = skge_rx_get(skge, e, len); + if (likely(skb)) { + skb_put(skb, len); + skb->protocol = eth_type_trans(skb, dev); - dev->last_rx = jiffies; - netif_receive_skb(skb); + dev->last_rx = jiffies; + netif_receive_skb(skb); - ++work_done; + ++work_done; + } else + skge_rx_reuse(e, skge->rx_buf_size); } ring->to_clean = e; - *budget -= work_done; - dev->quota -= work_done; - done = work_done < to_do; - - if (skge_rx_fill(skge)) - done = 0; - /* restart receiver */ wmb(); skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), CSR_START | CSR_IRQ_CL_F); - if (done) { - local_irq_disable(); - hw->intr_mask |= irqmask[skge->port]; - /* Order is important since data can get interrupted */ - skge_write32(hw, B0_IMSK, hw->intr_mask); - __netif_rx_complete(dev); - local_irq_enable(); - } + *budget -= work_done; + dev->quota -= work_done; - return !done; + if (work_done >= to_do) + return 1; /* not done */ + + local_irq_disable(); + __netif_rx_complete(dev); + hw->intr_mask |= portirqmask[skge->port]; + skge_write32(hw, B0_IMSK, hw->intr_mask); + local_irq_enable(); + return 0; } static inline void skge_tx_intr(struct net_device *dev) @@ -2657,7 +2607,7 @@ static inline void skge_tx_intr(struct net_device *dev) struct skge_element *e; spin_lock(&skge->tx_lock); - for(e = ring->to_clean; e != ring->to_use; e = e->next) { + for (e = ring->to_clean; e != ring->to_use; e = e->next) { struct skge_tx_desc *td = e->desc; u32 control; @@ -2690,12 +2640,12 @@ static void skge_mac_parity(struct skge_hw *hw, int port) : (port == 0 ? "(port A)": "(port B")); if (hw->chip_id == CHIP_ID_GENESIS) - skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), + skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_PERR); else /* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */ - skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), - (hw->chip_id == CHIP_ID_YUKON && chip_rev(hw) == 0) + skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), + (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev == 0) ? GMF_CLI_TX_FC : GMF_CLI_TX_PE); } @@ -2703,16 +2653,16 @@ static void skge_pci_clear(struct skge_hw *hw) { u16 status; - status = skge_read16(hw, SKGEPCI_REG(PCI_STATUS)); + pci_read_config_word(hw->pdev, PCI_STATUS, &status); skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - skge_write16(hw, SKGEPCI_REG(PCI_STATUS), - status | PCI_STATUS_ERROR_BITS); + pci_write_config_word(hw->pdev, PCI_STATUS, + status | PCI_STATUS_ERROR_BITS); skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } static void skge_mac_intr(struct skge_hw *hw, int port) { - if (hw->chip_id == CHIP_ID_GENESIS) + if (hw->chip_id == CHIP_ID_GENESIS) genesis_mac_intr(hw, port); else yukon_mac_intr(hw, port); @@ -2726,9 +2676,9 @@ static void skge_error_irq(struct skge_hw *hw) if (hw->chip_id == CHIP_ID_GENESIS) { /* clear xmac errors */ if (hwstatus & (IS_NO_STAT_M1|IS_NO_TIST_M1)) - skge_write16(hw, SKGEMAC_REG(0, RX_MFF_CTRL1), MFF_CLR_INSTAT); + skge_write16(hw, SK_REG(0, RX_MFF_CTRL1), MFF_CLR_INSTAT); if (hwstatus & (IS_NO_STAT_M2|IS_NO_TIST_M2)) - skge_write16(hw, SKGEMAC_REG(0, RX_MFF_CTRL2), MFF_CLR_INSTAT); + skge_write16(hw, SK_REG(0, RX_MFF_CTRL2), MFF_CLR_INSTAT); } else { /* Timestamp (unused) overflow */ if (hwstatus & IS_IRQ_TIST_OV) @@ -2803,8 +2753,8 @@ static void skge_extirq(unsigned long data) if (hw->chip_id != CHIP_ID_GENESIS) yukon_phy_intr(skge); - else if (hw->phy_type == SK_PHY_BCOM) - genesis_bcom_intr(skge); + else + bcom_phy_intr(skge); } } spin_unlock(&hw->phy_lock); @@ -2824,19 +2774,14 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs) return IRQ_NONE; status &= hw->intr_mask; - - if ((status & IS_R1_F) && netif_rx_schedule_prep(hw->dev[0])) { - status &= ~IS_R1_F; + if (status & IS_R1_F) { hw->intr_mask &= ~IS_R1_F; - skge_write32(hw, B0_IMSK, hw->intr_mask); - __netif_rx_schedule(hw->dev[0]); + netif_rx_schedule(hw->dev[0]); } - if ((status & IS_R2_F) && netif_rx_schedule_prep(hw->dev[1])) { - status &= ~IS_R2_F; + if (status & IS_R2_F) { hw->intr_mask &= ~IS_R2_F; - skge_write32(hw, B0_IMSK, hw->intr_mask); - __netif_rx_schedule(hw->dev[1]); + netif_rx_schedule(hw->dev[1]); } if (status & IS_XA1_F) @@ -2845,9 +2790,27 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs) if (status & IS_XA2_F) skge_tx_intr(hw->dev[1]); + if (status & IS_PA_TO_RX1) { + struct skge_port *skge = netdev_priv(hw->dev[0]); + ++skge->net_stats.rx_over_errors; + skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_RX1); + } + + if (status & IS_PA_TO_RX2) { + struct skge_port *skge = netdev_priv(hw->dev[1]); + ++skge->net_stats.rx_over_errors; + skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_RX2); + } + + if (status & IS_PA_TO_TX1) + skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_TX1); + + if (status & IS_PA_TO_TX2) + skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_TX2); + if (status & IS_MAC1) skge_mac_intr(hw, 0); - + if (status & IS_MAC2) skge_mac_intr(hw, 1); @@ -2859,8 +2822,7 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs) tasklet_schedule(&hw->ext_tasklet); } - if (status) - skge_write32(hw, B0_IMSK, hw->intr_mask); + skge_write32(hw, B0_IMSK, hw->intr_mask); return IRQ_HANDLED; } @@ -2904,9 +2866,6 @@ static const struct { { CHIP_ID_YUKON, "Yukon" }, { CHIP_ID_YUKON_LITE, "Yukon-Lite"}, { CHIP_ID_YUKON_LP, "Yukon-LP"}, - { CHIP_ID_YUKON_XL, "Yukon-2 XL"}, - { CHIP_ID_YUKON_EC, "YUKON-2 EC"}, - { CHIP_ID_YUKON_FE, "YUKON-2 FE"}, }; static const char *skge_board_name(const struct skge_hw *hw) @@ -2930,8 +2889,8 @@ static const char *skge_board_name(const struct skge_hw *hw) static int skge_reset(struct skge_hw *hw) { u16 ctst; - u8 t8; - int i, ports; + u8 t8, mac_cfg; + int i; ctst = skge_read16(hw, B0_CTST); @@ -2952,12 +2911,9 @@ static int skge_reset(struct skge_hw *hw) hw->phy_type = skge_read8(hw, B2_E_1) & 0xf; hw->pmd_type = skge_read8(hw, B2_PMD_TYP); - switch(hw->chip_id) { + switch (hw->chip_id) { case CHIP_ID_GENESIS: switch (hw->phy_type) { - case SK_PHY_XMAC: - hw->phy_addr = PHY_ADDR_XMAC; - break; case SK_PHY_BCOM: hw->phy_addr = PHY_ADDR_BCOM; break; @@ -2986,8 +2942,9 @@ static int skge_reset(struct skge_hw *hw) return -EOPNOTSUPP; } - hw->mac_cfg = skge_read8(hw, B2_MAC_CFG); - ports = isdualport(hw) ? 2 : 1; + mac_cfg = skge_read8(hw, B2_MAC_CFG); + hw->ports = (mac_cfg & CFG_SNG_MAC) ? 1 : 2; + hw->chip_rev = (mac_cfg & CFG_CHIP_R_MSK) >> 4; /* read the adapters RAM size */ t8 = skge_read8(hw, B2_E_0); @@ -3010,9 +2967,9 @@ static int skge_reset(struct skge_hw *hw) /* switch power to VCC (WA for VAUX problem) */ skge_write8(hw, B0_POWER_CTRL, PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON); - for (i = 0; i < ports; i++) { - skge_write16(hw, SKGEMAC_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); - skge_write16(hw, SKGEMAC_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR); + for (i = 0; i < hw->ports; i++) { + skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); + skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR); } } @@ -3022,8 +2979,8 @@ static int skge_reset(struct skge_hw *hw) skge_write8(hw, B0_LED, LED_STAT_ON); /* enable the Tx Arbiters */ - for (i = 0; i < ports; i++) - skge_write8(hw, SKGEMAC_REG(i, TXA_CTRL), TXA_ENA_ARB); + for (i = 0; i < hw->ports; i++) + skge_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB); /* Initialize ram interface */ skge_write16(hw, B3_RI_CTRL, RI_RST_CLR); @@ -3050,16 +3007,14 @@ static int skge_reset(struct skge_hw *hw) skge_write32(hw, B2_IRQM_INI, skge_usecs2clk(hw, 100)); skge_write32(hw, B2_IRQM_CTRL, TIM_START); - hw->intr_mask = IS_HW_ERR | IS_EXT_REG | IS_PORT_1; - if (isdualport(hw)) - hw->intr_mask |= IS_PORT_2; + hw->intr_mask = IS_HW_ERR | IS_EXT_REG; skge_write32(hw, B0_IMSK, hw->intr_mask); if (hw->chip_id != CHIP_ID_GENESIS) skge_write8(hw, GMAC_IRQ_MSK, 0); spin_lock_bh(&hw->phy_lock); - for (i = 0; i < ports; i++) { + for (i = 0; i < hw->ports; i++) { if (hw->chip_id == CHIP_ID_GENESIS) genesis_reset(hw, i); else @@ -3071,7 +3026,8 @@ static int skge_reset(struct skge_hw *hw) } /* Initialize network device */ -static struct net_device *skge_devinit(struct skge_hw *hw, int port) +static struct net_device *skge_devinit(struct skge_hw *hw, int port, + int highmem) { struct skge_port *skge; struct net_device *dev = alloc_etherdev(sizeof(*skge)); @@ -3104,6 +3060,8 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port) #endif dev->irq = hw->pdev->irq; dev->features = NETIF_F_LLTX; + if (highmem) + dev->features |= NETIF_F_HIGHDMA; skge = netdev_priv(dev); skge->netdev = dev; @@ -3117,7 +3075,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port) skge->flow_control = FLOW_MODE_SYMMETRIC; skge->duplex = -1; skge->speed = -1; - skge->advertising = skge_modes(hw); + skge->advertising = skge_supported_modes(hw); hw->dev[port] = dev; @@ -3125,10 +3083,6 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port) spin_lock_init(&skge->tx_lock); - init_timer(&skge->link_check); - skge->link_check.function = skge_link_timer; - skge->link_check.data = (unsigned long) skge; - init_timer(&skge->led_blink); skge->led_blink.function = skge_blink_timer; skge->led_blink.data = (unsigned long) skge; @@ -3232,14 +3186,11 @@ static int __devinit skge_probe(struct pci_dev *pdev, printk(KERN_INFO PFX "addr 0x%lx irq %d chip %s rev %d\n", pci_resource_start(pdev, 0), pdev->irq, - skge_board_name(hw), chip_rev(hw)); + skge_board_name(hw), hw->chip_rev); - if ((dev = skge_devinit(hw, 0)) == NULL) + if ((dev = skge_devinit(hw, 0, using_dac)) == NULL) goto err_out_led_off; - if (using_dac) - dev->features |= NETIF_F_HIGHDMA; - if ((err = register_netdev(dev))) { printk(KERN_ERR PFX "%s: cannot register net device\n", pci_name(pdev)); @@ -3248,10 +3199,7 @@ static int __devinit skge_probe(struct pci_dev *pdev, skge_show_addr(dev); - if (isdualport(hw) && (dev1 = skge_devinit(hw, 1))) { - if (using_dac) - dev1->features |= NETIF_F_HIGHDMA; - + if (hw->ports > 1 && (dev1 = skge_devinit(hw, 1, using_dac))) { if (register_netdev(dev1) == 0) skge_show_addr(dev1); else { @@ -3288,7 +3236,7 @@ static void __devexit skge_remove(struct pci_dev *pdev) struct skge_hw *hw = pci_get_drvdata(pdev); struct net_device *dev0, *dev1; - if(!hw) + if (!hw) return; if ((dev1 = hw->dev[1])) @@ -3316,7 +3264,7 @@ static int skge_suspend(struct pci_dev *pdev, u32 state) struct skge_hw *hw = pci_get_drvdata(pdev); int i, wol = 0; - for(i = 0; i < 2; i++) { + for (i = 0; i < 2; i++) { struct net_device *dev = hw->dev[i]; if (dev) { @@ -3349,11 +3297,11 @@ static int skge_resume(struct pci_dev *pdev) skge_reset(hw); - for(i = 0; i < 2; i++) { + for (i = 0; i < 2; i++) { struct net_device *dev = hw->dev[i]; if (dev) { netif_device_attach(dev); - if(netif_running(dev)) + if (netif_running(dev)) skge_up(dev); } } diff --git a/drivers/net/skge.h b/drivers/net/skge.h index 36c62b68fab..14d0cc01fb9 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -7,31 +7,6 @@ /* PCI config registers */ #define PCI_DEV_REG1 0x40 #define PCI_DEV_REG2 0x44 -#ifndef PCI_VPD -#define PCI_VPD 0x50 -#endif - -/* PCI_OUR_REG_2 32 bit Our Register 2 */ -enum { - PCI_VPD_WR_THR = 0xff<<24, /* Bit 31..24: VPD Write Threshold */ - PCI_DEV_SEL = 0x7f<<17, /* Bit 23..17: EEPROM Device Select */ - PCI_VPD_ROM_SZ = 7 <<14, /* Bit 16..14: VPD ROM Size */ - /* Bit 13..12: reserved */ - PCI_EN_DUMMY_RD = 1<<3, /* Enable Dummy Read */ - PCI_REV_DESC = 1<<2, /* Reverse Desc. Bytes */ - PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */ -}; - -/* PCI_VPD_ADR_REG 16 bit VPD Address Register */ -enum { - PCI_VPD_FLAG = 1<<15, /* starts VPD rd/wr cycle */ - PCI_VPD_ADR_MSK =0x7fffL, /* Bit 14.. 0: VPD Address Mask */ - VPD_RES_ID = 0x82, - VPD_RES_READ = 0x90, - VPD_RES_WRITE = 0x81, - VPD_RES_END = 0x78, -}; - #define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \ PCI_STATUS_SIG_SYSTEM_ERROR | \ @@ -39,7 +14,6 @@ enum { PCI_STATUS_REC_TARGET_ABORT | \ PCI_STATUS_PARITY) - enum csr_regs { B0_RAP = 0x0000, B0_CTST = 0x0004, @@ -229,8 +203,11 @@ enum { IS_XA2_F = 1<<1, /* Q_XA2 End of Frame */ IS_XA2_C = 1<<0, /* Q_XA2 Encoding Error */ - IS_PORT_1 = IS_XA1_F| IS_R1_F| IS_MAC1, - IS_PORT_2 = IS_XA2_F| IS_R2_F| IS_MAC2, + IS_TO_PORT1 = IS_PA_TO_RX1 | IS_PA_TO_TX1, + IS_TO_PORT2 = IS_PA_TO_RX2 | IS_PA_TO_TX2, + + IS_PORT_1 = IS_XA1_F| IS_R1_F | IS_TO_PORT1 | IS_MAC1, + IS_PORT_2 = IS_XA2_F| IS_R2_F | IS_TO_PORT2 | IS_MAC2, }; @@ -288,14 +265,6 @@ enum { CHIP_REV_YU_LITE_A3 = 7, /* Chip Rev. for YUKON-Lite A3 */ }; -/* B2_LD_TEST 8 bit EPROM loader test register */ -enum { - LD_T_ON = 1<<3, /* Loader Test mode on */ - LD_T_OFF = 1<<2, /* Loader Test mode off */ - LD_T_STEP = 1<<1, /* Decrement FPROM addr. Counter */ - LD_START = 1<<0, /* Start loading FPROM */ -}; - /* B2_TI_CTRL 8 bit Timer control */ /* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */ enum { @@ -313,16 +282,6 @@ enum { TIM_T_STEP = 1<<0, /* Test step */ }; -/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */ -/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */ -/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */ -enum { - DPT_MSK = 0x00ffffffL, /* Bit 23.. 0: Desc Poll Timer Bits */ - - DPT_START = 1<<1, /* Start Descriptor Poll Timer */ - DPT_STOP = 1<<0, /* Stop Descriptor Poll Timer */ -}; - /* B2_GP_IO 32 bit General Purpose I/O Register */ enum { GP_DIR_9 = 1<<25, /* IO_9 direct, 0=In/1=Out */ @@ -348,30 +307,6 @@ enum { GP_IO_0 = 1<<0, /* IO_0 pin */ }; -/* Rx/Tx Path related Arbiter Test Registers */ -/* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */ -/* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */ -/* B3_PA_TEST 16 bit Packet Arbiter Test Register */ -/* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */ -enum { - TX2_T_EV = 1<<15,/* TX2 Timeout/Recv Event occured */ - TX2_T_ON = 1<<14,/* TX2 Timeout/Recv Timer Test On */ - TX2_T_OFF = 1<<13,/* TX2 Timeout/Recv Timer Tst Off */ - TX2_T_STEP = 1<<12,/* TX2 Timeout/Recv Timer Step */ - TX1_T_EV = 1<<11,/* TX1 Timeout/Recv Event occured */ - TX1_T_ON = 1<<10,/* TX1 Timeout/Recv Timer Test On */ - TX1_T_OFF = 1<<9, /* TX1 Timeout/Recv Timer Tst Off */ - TX1_T_STEP = 1<<8, /* TX1 Timeout/Recv Timer Step */ - RX2_T_EV = 1<<7, /* RX2 Timeout/Recv Event occured */ - RX2_T_ON = 1<<6, /* RX2 Timeout/Recv Timer Test On */ - RX2_T_OFF = 1<<5, /* RX2 Timeout/Recv Timer Tst Off */ - RX2_T_STEP = 1<<4, /* RX2 Timeout/Recv Timer Step */ - RX1_T_EV = 1<<3, /* RX1 Timeout/Recv Event occured */ - RX1_T_ON = 1<<2, /* RX1 Timeout/Recv Timer Test On */ - RX1_T_OFF = 1<<1, /* RX1 Timeout/Recv Timer Tst Off */ - RX1_T_STEP = 1<<0, /* RX1 Timeout/Recv Timer Step */ -}; - /* Descriptor Bit Definition */ /* TxCtrl Transmit Buffer Control Field */ /* RxCtrl Receive Buffer Control Field */ @@ -428,14 +363,6 @@ enum { RI_RST_SET = 1<<0, /* Set RAM Interface Reset */ }; -/* B3_RI_TEST 8 bit RAM Iface Test Register */ -enum { - RI_T_EV = 1<<3, /* Timeout Event occured */ - RI_T_ON = 1<<2, /* Timeout Timer Test On */ - RI_T_OFF = 1<<1, /* Timeout Timer Test Off */ - RI_T_STEP = 1<<0, /* Timeout Timer Step */ -}; - /* MAC Arbiter Registers */ /* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */ enum { @@ -452,19 +379,6 @@ enum { #define SK_PKT_TO_MAX 0xffff /* Maximum value */ #define SK_RI_TO_53 36 /* RAM interface timeout */ - -/* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */ -enum { - MA_ENA_REC_TX2 = 1<<7, /* Enable Recovery Timer TX2 */ - MA_DIS_REC_TX2 = 1<<6, /* Disable Recovery Timer TX2 */ - MA_ENA_REC_TX1 = 1<<5, /* Enable Recovery Timer TX1 */ - MA_DIS_REC_TX1 = 1<<4, /* Disable Recovery Timer TX1 */ - MA_ENA_REC_RX2 = 1<<3, /* Enable Recovery Timer RX2 */ - MA_DIS_REC_RX2 = 1<<2, /* Disable Recovery Timer RX2 */ - MA_ENA_REC_RX1 = 1<<1, /* Enable Recovery Timer RX1 */ - MA_DIS_REC_RX1 = 1<<0, /* Disable Recovery Timer RX1 */ -}; - /* Packet Arbiter Registers */ /* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */ enum { @@ -488,7 +402,7 @@ enum { PA_ENA_TO_TX1 | PA_ENA_TO_TX2) -/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ +/* Transmit Arbiter Registers MAC 1 and 2, use SK_REG() to access */ /* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */ /* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */ /* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */ @@ -511,7 +425,7 @@ enum { /* * Bank 4 - 5 */ -/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ +/* Transmit Arbiter Registers MAC 1 and 2, use SK_REG() to access */ enum { TXA_ITI_INI = 0x0200,/* 32 bit Tx Arb Interval Timer Init Val*/ TXA_ITI_VAL = 0x0204,/* 32 bit Tx Arb Interval Timer Value */ @@ -537,7 +451,7 @@ enum { /* Queue Register Offsets, use Q_ADDR() to access */ enum { - B8_Q_REGS = 0x0400, /* base of Queue registers */ + B8_Q_REGS = 0x0400, /* base of Queue registers */ Q_D = 0x00, /* 8*32 bit Current Descriptor */ Q_DA_L = 0x20, /* 32 bit Current Descriptor Address Low dWord */ Q_DA_H = 0x24, /* 32 bit Current Descriptor Address High dWord */ @@ -618,8 +532,7 @@ enum { enum { PHY_ADDR_XMAC = 0<<8, PHY_ADDR_BCOM = 1<<8, - PHY_ADDR_LONE = 3<<8, - PHY_ADDR_NAT = 0<<8, + /* GPHY address (bits 15..11 of SMI control reg) */ PHY_ADDR_MARV = 0, }; @@ -986,7 +899,7 @@ enum { LINKLED_BLINK_OFF = 0x10, LINKLED_BLINK_ON = 0x20, }; - + /* GMAC and GPHY Control Registers (YUKON only) */ enum { GMAC_CTRL = 0x0f00,/* 32 bit GMAC Control Reg */ @@ -1151,54 +1064,6 @@ enum { PHY_MARV_FE_SPEC_2 = 0x1c,/* 16 bit r/w Specific Control Reg. 2 */ }; -/* Level One-PHY Registers, indirect addressed over XMAC */ -enum { - PHY_LONE_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ - PHY_LONE_STAT = 0x01,/* 16 bit r/o PHY Status Register */ - PHY_LONE_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ - PHY_LONE_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ - PHY_LONE_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ - PHY_LONE_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */ - PHY_LONE_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ - PHY_LONE_NEPG = 0x07,/* 16 bit r/w Next Page Register */ - PHY_LONE_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */ - /* Level One-specific registers */ - PHY_LONE_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */ - PHY_LONE_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */ - PHY_LONE_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */ - PHY_LONE_PORT_CFG = 0x10,/* 16 bit r/w Port Configuration Reg*/ - PHY_LONE_Q_STAT = 0x11,/* 16 bit r/o Quick Status Reg */ - PHY_LONE_INT_ENAB = 0x12,/* 16 bit r/w Interrupt Enable Reg */ - PHY_LONE_INT_STAT = 0x13,/* 16 bit r/o Interrupt Status Reg */ - PHY_LONE_LED_CFG = 0x14,/* 16 bit r/w LED Configuration Reg */ - PHY_LONE_PORT_CTRL = 0x15,/* 16 bit r/w Port Control Reg */ - PHY_LONE_CIM = 0x16,/* 16 bit r/o CIM Reg */ -}; - -/* National-PHY Registers, indirect addressed over XMAC */ -enum { - PHY_NAT_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ - PHY_NAT_STAT = 0x01,/* 16 bit r/w PHY Status Register */ - PHY_NAT_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ - PHY_NAT_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ - PHY_NAT_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ - PHY_NAT_AUNE_LP = 0x05,/* 16 bit r/o Link Partner Ability Reg */ - PHY_NAT_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ - PHY_NAT_NEPG = 0x07,/* 16 bit r/w Next Page Register */ - PHY_NAT_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner Reg */ - /* National-specific registers */ - PHY_NAT_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */ - PHY_NAT_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */ - PHY_NAT_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Register */ - PHY_NAT_EXT_CTRL1 = 0x10,/* 16 bit r/o Extended Control Reg1 */ - PHY_NAT_Q_STAT1 = 0x11,/* 16 bit r/o Quick Status Reg1 */ - PHY_NAT_10B_OP = 0x12,/* 16 bit r/o 10Base-T Operations Reg */ - PHY_NAT_EXT_CTRL2 = 0x13,/* 16 bit r/o Extended Control Reg1 */ - PHY_NAT_Q_STAT2 = 0x14,/* 16 bit r/o Quick Status Reg2 */ - - PHY_NAT_PHY_ADDR = 0x19,/* 16 bit r/o PHY Address Register */ -}; - enum { PHY_CT_RESET = 1<<15, /* Bit 15: (sc) clear all PHY related regs */ PHY_CT_LOOP = 1<<14, /* Bit 14: enable Loopback over PHY */ @@ -1253,8 +1118,29 @@ enum { PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */ }; +/* Advertisement register bits */ enum { PHY_AN_NXT_PG = 1<<15, /* Bit 15: Request Next Page */ + PHY_AN_ACK = 1<<14, /* Bit 14: (ro) Acknowledge Received */ + PHY_AN_RF = 1<<13, /* Bit 13: Remote Fault Bits */ + + PHY_AN_PAUSE_ASYM = 1<<11,/* Bit 11: Try for asymmetric */ + PHY_AN_PAUSE_CAP = 1<<10, /* Bit 10: Try for pause */ + PHY_AN_100BASE4 = 1<<9, /* Bit 9: Try for 100mbps 4k packets */ + PHY_AN_100FULL = 1<<8, /* Bit 8: Try for 100mbps full-duplex */ + PHY_AN_100HALF = 1<<7, /* Bit 7: Try for 100mbps half-duplex */ + PHY_AN_10FULL = 1<<6, /* Bit 6: Try for 10mbps full-duplex */ + PHY_AN_10HALF = 1<<5, /* Bit 5: Try for 10mbps half-duplex */ + PHY_AN_CSMA = 1<<0, /* Bit 0: Only selector supported */ + PHY_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ + PHY_AN_FULL = PHY_AN_100FULL | PHY_AN_10FULL | PHY_AN_CSMA, + PHY_AN_ALL = PHY_AN_10HALF | PHY_AN_10FULL | + PHY_AN_100HALF | PHY_AN_100FULL, +}; + +/* Xmac Specific */ +enum { + PHY_X_AN_NXT_PG = 1<<15, /* Bit 15: Request Next Page */ PHY_X_AN_ACK = 1<<14, /* Bit 14: (ro) Acknowledge Received */ PHY_X_AN_RFB = 3<<12,/* Bit 13..12: Remote Fault Bits */ @@ -1263,82 +1149,6 @@ enum { PHY_X_AN_FD = 1<<5, /* Bit 5: Full Duplex */ }; -enum { - PHY_B_AN_RF = 1<<13, /* Bit 13: Remote Fault */ - - PHY_B_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */ - PHY_B_AN_PC = 1<<10, /* Bit 10: Pause Capable */ - PHY_B_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ -}; - -enum { - PHY_L_AN_RF = 1<<13, /* Bit 13: Remote Fault */ - /* Bit 12: reserved */ - PHY_L_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */ - PHY_L_AN_PC = 1<<10, /* Bit 10: Pause Capable */ - - PHY_L_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ -}; - -/* PHY_NAT_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement */ -/* PHY_NAT_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ -/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ -enum { - PHY_N_AN_RF = 1<<13, /* Bit 13: Remote Fault */ - - PHY_N_AN_100F = 1<<11, /* Bit 11: 100Base-T2 FD Support */ - PHY_N_AN_100H = 1<<10, /* Bit 10: 100Base-T2 HD Support */ - - PHY_N_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ -}; - -/* field type definition for PHY_x_AN_SEL */ -enum { - PHY_SEL_TYPE = 1, /* 00001 = Ethernet */ -}; - -enum { - PHY_ANE_LP_NP = 1<<3, /* Bit 3: Link Partner can Next Page */ - PHY_ANE_LOC_NP = 1<<2, /* Bit 2: Local PHY can Next Page */ - PHY_ANE_RX_PG = 1<<1, /* Bit 1: Page Received */ -}; - -enum { - PHY_ANE_PAR_DF = 1<<4, /* Bit 4: Parallel Detection Fault */ - - PHY_ANE_LP_CAP = 1<<0, /* Bit 0: Link Partner Auto-Neg. Cap. */ -}; - -enum { - PHY_NP_MORE = 1<<15, /* Bit 15: More, Next Pages to follow */ - PHY_NP_ACK1 = 1<<14, /* Bit 14: (ro) Ack1, for receiving a message */ - PHY_NP_MSG_VAL = 1<<13, /* Bit 13: Message Page valid */ - PHY_NP_ACK2 = 1<<12, /* Bit 12: Ack2, comply with msg content */ - PHY_NP_TOG = 1<<11, /* Bit 11: Toggle Bit, ensure sync */ - PHY_NP_MSG = 0x07ff, /* Bit 10..0: Message from/to Link Partner */ -}; - -enum { - PHY_X_EX_FD = 1<<15, /* Bit 15: Device Supports Full Duplex */ - PHY_X_EX_HD = 1<<14, /* Bit 14: Device Supports Half Duplex */ -}; - -enum { - PHY_X_RS_PAUSE = 3<<7,/* Bit 8..7: selected Pause Mode */ - PHY_X_RS_HD = 1<<6, /* Bit 6: Half Duplex Mode selected */ - PHY_X_RS_FD = 1<<5, /* Bit 5: Full Duplex Mode selected */ - PHY_X_RS_ABLMIS = 1<<4, /* Bit 4: duplex or pause cap mismatch */ - PHY_X_RS_PAUMIS = 1<<3, /* Bit 3: pause capability mismatch */ -}; - -/** Remote Fault Bits (PHY_X_AN_RFB) encoding */ -enum { - X_RFB_OK = 0<<12,/* Bit 13..12 No errors, Link OK */ - X_RFB_LF = 1<<12, /* Bit 13..12 Link Failure */ - X_RFB_OFF = 2<<12,/* Bit 13..12 Offline */ - X_RFB_AN_ERR = 3<<12,/* Bit 13..12 Auto-Negotiation Error */ -}; - /* Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding */ enum { PHY_X_P_NO_PAUSE = 0<<7,/* Bit 8..7: no Pause Mode */ @@ -1418,6 +1228,16 @@ enum { PHY_B_PES_MLT3_ER = 1<<0, /* Bit 0: MLT3 code Error */ }; +/* PHY_BCOM_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/* PHY_BCOM_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +enum { + PHY_B_AN_RF = 1<<13, /* Bit 13: Remote Fault */ + + PHY_B_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */ + PHY_B_AN_PC = 1<<10, /* Bit 10: Pause Capable */ +}; + + /***** PHY_BCOM_FC_CTR 16 bit r/w False Carrier Counter *****/ enum { PHY_B_FC_CTR = 0xff, /* Bit 7..0: False Carrier Counter */ @@ -1478,7 +1298,9 @@ enum { PHY_B_IS_LST_CHANGE = 1<<1, /* Bit 1: Link Status Changed */ PHY_B_IS_CRC_ER = 1<<0, /* Bit 0: CRC Error */ }; -#define PHY_B_DEF_MSK (~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) +#define PHY_B_DEF_MSK \ + (~(PHY_B_IS_PSE | PHY_B_IS_AN_PR | PHY_B_IS_DUP_CHANGE | \ + PHY_B_IS_LSP_CHANGE | PHY_B_IS_LST_CHANGE)) /* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */ enum { @@ -1495,166 +1317,6 @@ enum { PHY_B_RES_1000HD = 6<<8,/* Bit 10..8: 1000Base-T Half Dup. */ }; -/* - * Level One-Specific - */ -/***** PHY_LONE_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ -enum { - PHY_L_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */ - PHY_L_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */ - PHY_L_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */ - PHY_L_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */ - PHY_L_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */ - PHY_L_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */ -}; - -/***** PHY_LONE_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ -enum { - PHY_L_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */ - PHY_L_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */ - PHY_L_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */ - PHY_L_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status */ - PHY_L_1000S_LP_FD = 1<<11, /* Bit 11: Link Partner can FD */ - PHY_L_1000S_LP_HD = 1<<10, /* Bit 10: Link Partner can HD */ - - PHY_L_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */ - -/***** PHY_LONE_EXT_STAT 16 bit r/o Extended Status Register *****/ - PHY_L_ES_X_FD_CAP = 1<<15, /* Bit 15: 1000Base-X FD capable */ - PHY_L_ES_X_HD_CAP = 1<<14, /* Bit 14: 1000Base-X HD capable */ - PHY_L_ES_T_FD_CAP = 1<<13, /* Bit 13: 1000Base-T FD capable */ - PHY_L_ES_T_HD_CAP = 1<<12, /* Bit 12: 1000Base-T HD capable */ -}; - -/***** PHY_LONE_PORT_CFG 16 bit r/w Port Configuration Reg *****/ -enum { - PHY_L_PC_REP_MODE = 1<<15, /* Bit 15: Repeater Mode */ - - PHY_L_PC_TX_DIS = 1<<13, /* Bit 13: Tx output Disabled */ - PHY_L_PC_BY_SCR = 1<<12, /* Bit 12: Bypass Scrambler */ - PHY_L_PC_BY_45 = 1<<11, /* Bit 11: Bypass 4B5B-Decoder */ - PHY_L_PC_JAB_DIS = 1<<10, /* Bit 10: Jabber Disabled */ - PHY_L_PC_SQE = 1<<9, /* Bit 9: Enable Heartbeat */ - PHY_L_PC_TP_LOOP = 1<<8, /* Bit 8: TP Loopback */ - PHY_L_PC_SSS = 1<<7, /* Bit 7: Smart Speed Selection */ - PHY_L_PC_FIFO_SIZE = 1<<6, /* Bit 6: FIFO Size */ - PHY_L_PC_PRE_EN = 1<<5, /* Bit 5: Preamble Enable */ - PHY_L_PC_CIM = 1<<4, /* Bit 4: Carrier Integrity Mon */ - PHY_L_PC_10_SER = 1<<3, /* Bit 3: Use Serial Output */ - PHY_L_PC_ANISOL = 1<<2, /* Bit 2: Unisolate Port */ - PHY_L_PC_TEN_BIT = 1<<1, /* Bit 1: 10bit iface mode on */ - PHY_L_PC_ALTCLOCK = 1<<0, /* Bit 0: (ro) ALTCLOCK Mode on */ -}; - -/***** PHY_LONE_Q_STAT 16 bit r/o Quick Status Reg *****/ -enum { - PHY_L_QS_D_RATE = 3<<14,/* Bit 15..14: Data Rate */ - PHY_L_QS_TX_STAT = 1<<13, /* Bit 13: Transmitting */ - PHY_L_QS_RX_STAT = 1<<12, /* Bit 12: Receiving */ - PHY_L_QS_COL_STAT = 1<<11, /* Bit 11: Collision */ - PHY_L_QS_L_STAT = 1<<10, /* Bit 10: Link is up */ - PHY_L_QS_DUP_MOD = 1<<9, /* Bit 9: Full/Half Duplex */ - PHY_L_QS_AN = 1<<8, /* Bit 8: AutoNeg is On */ - PHY_L_QS_AN_C = 1<<7, /* Bit 7: AN is Complete */ - PHY_L_QS_LLE = 7<<4,/* Bit 6..4: Line Length Estim. */ - PHY_L_QS_PAUSE = 1<<3, /* Bit 3: LP advertised Pause */ - PHY_L_QS_AS_PAUSE = 1<<2, /* Bit 2: LP adv. asym. Pause */ - PHY_L_QS_ISOLATE = 1<<1, /* Bit 1: CIM Isolated */ - PHY_L_QS_EVENT = 1<<0, /* Bit 0: Event has occurred */ -}; - -/***** PHY_LONE_INT_ENAB 16 bit r/w Interrupt Enable Reg *****/ -/***** PHY_LONE_INT_STAT 16 bit r/o Interrupt Status Reg *****/ -enum { - PHY_L_IS_AN_F = 1<<13, /* Bit 13: Auto-Negotiation fault */ - PHY_L_IS_CROSS = 1<<11, /* Bit 11: Crossover used */ - PHY_L_IS_POL = 1<<10, /* Bit 10: Polarity correct. used */ - PHY_L_IS_SS = 1<<9, /* Bit 9: Smart Speed Downgrade */ - PHY_L_IS_CFULL = 1<<8, /* Bit 8: Counter Full */ - PHY_L_IS_AN_C = 1<<7, /* Bit 7: AutoNeg Complete */ - PHY_L_IS_SPEED = 1<<6, /* Bit 6: Speed Changed */ - PHY_L_IS_DUP = 1<<5, /* Bit 5: Duplex Changed */ - PHY_L_IS_LS = 1<<4, /* Bit 4: Link Status Changed */ - PHY_L_IS_ISOL = 1<<3, /* Bit 3: Isolate Occured */ - PHY_L_IS_MDINT = 1<<2, /* Bit 2: (ro) STAT: MII Int Pending */ - PHY_L_IS_INTEN = 1<<1, /* Bit 1: ENAB: Enable IRQs */ - PHY_L_IS_FORCE = 1<<0, /* Bit 0: ENAB: Force Interrupt */ -}; - -/* int. mask */ -#define PHY_L_DEF_MSK (PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN) - -/***** PHY_LONE_LED_CFG 16 bit r/w LED Configuration Reg *****/ -enum { - PHY_L_LC_LEDC = 3<<14,/* Bit 15..14: Col/Blink/On/Off */ - PHY_L_LC_LEDR = 3<<12,/* Bit 13..12: Rx/Blink/On/Off */ - PHY_L_LC_LEDT = 3<<10,/* Bit 11..10: Tx/Blink/On/Off */ - PHY_L_LC_LEDG = 3<<8,/* Bit 9..8: Giga/Blink/On/Off */ - PHY_L_LC_LEDS = 3<<6,/* Bit 7..6: 10-100/Blink/On/Off */ - PHY_L_LC_LEDL = 3<<4,/* Bit 5..4: Link/Blink/On/Off */ - PHY_L_LC_LEDF = 3<<2,/* Bit 3..2: Duplex/Blink/On/Off */ - PHY_L_LC_PSTRECH= 1<<1, /* Bit 1: Strech LED Pulses */ - PHY_L_LC_FREQ = 1<<0, /* Bit 0: 30/100 ms */ -}; - -/***** PHY_LONE_PORT_CTRL 16 bit r/w Port Control Reg *****/ -enum { - PHY_L_PC_TX_TCLK = 1<<15, /* Bit 15: Enable TX_TCLK */ - PHY_L_PC_ALT_NP = 1<<13, /* Bit 14: Alternate Next Page */ - PHY_L_PC_GMII_ALT= 1<<12, /* Bit 13: Alternate GMII driver */ - PHY_L_PC_TEN_CRS = 1<<10, /* Bit 10: Extend CRS*/ -}; - -/***** PHY_LONE_CIM 16 bit r/o CIM Reg *****/ -enum { - PHY_L_CIM_ISOL = 0xff<<8,/* Bit 15..8: Isolate Count */ - PHY_L_CIM_FALSE_CAR = 0xff, /* Bit 7..0: False Carrier Count */ -}; - -/* - * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding - */ -enum { - PHY_L_P_NO_PAUSE= 0<<10,/* Bit 11..10: no Pause Mode */ - PHY_L_P_SYM_MD = 1<<10, /* Bit 11..10: symmetric Pause Mode */ - PHY_L_P_ASYM_MD = 2<<10,/* Bit 11..10: asymmetric Pause Mode */ - PHY_L_P_BOTH_MD = 3<<10,/* Bit 11..10: both Pause Mode */ -}; - -/* - * National-Specific - */ -/***** PHY_NAT_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ -enum { - PHY_N_1000C_TEST= 7<<13,/* Bit 15..13: Test Modes */ - PHY_N_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */ - PHY_N_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */ - PHY_N_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */ - PHY_N_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */ - PHY_N_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */ - PHY_N_1000C_APC = 1<<7, /* Bit 7: Asymmetric Pause Cap. */}; - - -/***** PHY_NAT_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ -enum { - PHY_N_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */ - PHY_N_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */ - PHY_N_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */ - PHY_N_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status*/ - PHY_N_1000S_LP_FD= 1<<11, /* Bit 11: Link Partner can FD */ - PHY_N_1000S_LP_HD= 1<<10, /* Bit 10: Link Partner can HD */ - PHY_N_1000C_LP_APC= 1<<9, /* Bit 9: LP Asym. Pause Cap. */ - PHY_N_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */ -}; - -/***** PHY_NAT_EXT_STAT 16 bit r/o Extended Status Register *****/ -enum { - PHY_N_ES_X_FD_CAP= 1<<15, /* Bit 15: 1000Base-X FD capable */ - PHY_N_ES_X_HD_CAP= 1<<14, /* Bit 14: 1000Base-X HD capable */ - PHY_N_ES_T_FD_CAP= 1<<13, /* Bit 13: 1000Base-T FD capable */ - PHY_N_ES_T_HD_CAP= 1<<12, /* Bit 12: 1000Base-T HD capable */ -}; - /** Marvell-Specific */ enum { PHY_M_AN_NXT_PG = 1<<15, /* Request Next Page */ @@ -1718,7 +1380,7 @@ enum { PHY_M_PC_EN_DET_PLUS = 3<<8, /* Energy Detect Plus (Mode 2) */ }; -#define PHY_M_PC_MDI_XMODE(x) (((x)<<5) & PHY_M_PC_MDIX_MSK) +#define PHY_M_PC_MDI_XMODE(x) (((x)<<5) & PHY_M_PC_MDIX_MSK) enum { PHY_M_PC_MAN_MDI = 0, /* 00 = Manual MDI configuration */ @@ -2105,7 +1767,7 @@ enum { GM_GPSR_FC_RX_DIS = 1<<2, /* Bit 2: Rx Flow-Control Mode Disabled */ GM_GPSR_PROM_EN = 1<<1, /* Bit 1: Promiscuous Mode Enabled */ }; - + /* GM_GP_CTRL 16 bit r/w General Purpose Control Register */ enum { GM_GPCR_PROM_ENA = 1<<14, /* Bit 14: Enable Promiscuous Mode */ @@ -2127,7 +1789,7 @@ enum { #define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100) #define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS|GM_GPCR_AU_SPD_DIS) - + /* GM_TX_CTRL 16 bit r/w Transmit Control Register */ enum { GM_TXCR_FORCE_JAM = 1<<15, /* Bit 15: Force Jam / Flow-Control */ @@ -2138,7 +1800,7 @@ enum { #define TX_COL_THR(x) (((x)<<10) & GM_TXCR_COL_THR_MSK) #define TX_COL_DEF 0x04 - + /* GM_RX_CTRL 16 bit r/w Receive Control Register */ enum { GM_RXCR_UCF_ENA = 1<<15, /* Bit 15: Enable Unicast filtering */ @@ -2146,7 +1808,7 @@ enum { GM_RXCR_CRC_DIS = 1<<13, /* Bit 13: Remove 4-byte CRC */ GM_RXCR_PASS_FC = 1<<12, /* Bit 12: Pass FC packets to FIFO */ }; - + /* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */ enum { GM_TXPA_JAMLEN_MSK = 0x03<<14, /* Bit 15..14: Jam Length */ @@ -2171,7 +1833,7 @@ enum { GM_SMOD_JUMBO_ENA = 1<<8, /* Bit 8: Enable Jumbo (Max. Frame Len) */ GM_SMOD_IPG_MSK = 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */ }; - + #define DATA_BLIND_VAL(x) (((x)<<11) & GM_SMOD_DATABL_MSK) #define DATA_BLIND_DEF 0x04 @@ -2186,7 +1848,7 @@ enum { GM_SMI_CT_RD_VAL = 1<<4, /* Bit 4: Read Valid (Read completed) */ GM_SMI_CT_BUSY = 1<<3, /* Bit 3: Busy (Operation in progress) */ }; - + #define GM_SMI_CT_PHY_AD(x) (((x)<<11) & GM_SMI_CT_PHY_A_MSK) #define GM_SMI_CT_REG_AD(x) (((x)<<6) & GM_SMI_CT_REG_A_MSK) @@ -2195,7 +1857,7 @@ enum { GM_PAR_MIB_CLR = 1<<5, /* Bit 5: Set MIB Clear Counter Mode */ GM_PAR_MIB_TST = 1<<4, /* Bit 4: MIB Load Counter (Test Mode) */ }; - + /* Receive Frame Status Encoding */ enum { GMR_FS_LEN = 0xffff<<16, /* Bit 31..16: Rx Frame Length */ @@ -2217,12 +1879,12 @@ enum { /* * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR) */ - GMR_FS_ANY_ERR = GMR_FS_CRC_ERR | GMR_FS_LONG_ERR | - GMR_FS_MII_ERR | GMR_FS_BAD_FC | GMR_FS_GOOD_FC | + GMR_FS_ANY_ERR = GMR_FS_CRC_ERR | GMR_FS_LONG_ERR | + GMR_FS_MII_ERR | GMR_FS_BAD_FC | GMR_FS_GOOD_FC | GMR_FS_JABBER, /* Rx GMAC FIFO Flush Mask (default) */ RX_FF_FL_DEF_MSK = GMR_FS_CRC_ERR | GMR_FS_RX_FF_OV |GMR_FS_MII_ERR | - GMR_FS_BAD_FC | GMR_FS_GOOD_FC | GMR_FS_UN_SIZE | + GMR_FS_BAD_FC | GMR_FS_GOOD_FC | GMR_FS_UN_SIZE | GMR_FS_JABBER, }; @@ -2540,10 +2202,6 @@ enum { }; -/* XM_PHY_ADDR 16 bit r/w PHY Address Register */ -#define XM_PHY_ADDR_SZ 0x1f /* Bit 4..0: PHY Address bits */ - - /* XM_GP_PORT 32 bit r/w General Purpose Port Register */ enum { XM_GP_ANIP = 1<<6, /* Bit 6: (ro) Auto-Neg. in progress */ @@ -2662,8 +2320,8 @@ enum { }; #define XM_PAUSE_MODE (XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I) -#define XM_DEF_MODE (XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\ - XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA) +#define XM_DEF_MODE (XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\ + XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA) /* XM_STAT_CMD 16 bit r/w Statistics Command Register */ enum { @@ -2793,28 +2451,20 @@ struct skge_hw { u32 intr_mask; struct net_device *dev[2]; - u8 mac_cfg; u8 chip_id; + u8 chip_rev; u8 phy_type; u8 pmd_type; u16 phy_addr; + u8 ports; u32 ram_size; u32 ram_offset; - + struct tasklet_struct ext_tasklet; spinlock_t phy_lock; }; -static inline int isdualport(const struct skge_hw *hw) -{ - return !(hw->mac_cfg & CFG_SNG_MAC); -} - -static inline u8 chip_rev(const struct skge_hw *hw) -{ - return (hw->mac_cfg & CFG_CHIP_R_MSK) >> 4; -} static inline int iscopper(const struct skge_hw *hw) { @@ -2827,7 +2477,7 @@ enum { FLOW_MODE_REM_SEND = 2, /* Symmetric or just remote */ FLOW_MODE_SYMMETRIC = 3, /* Both stations may send PAUSE */ }; - + struct skge_port { u32 msg_enable; struct skge_hw *hw; @@ -2853,8 +2503,8 @@ struct skge_port { void *mem; /* PCI memory for rings */ dma_addr_t dma; unsigned long mem_size; + unsigned int rx_buf_size; - struct timer_list link_check; struct timer_list led_blink; }; @@ -2863,7 +2513,6 @@ struct skge_port { static inline u32 skge_read32(const struct skge_hw *hw, int reg) { return readl(hw->regs + reg); - } static inline u16 skge_read16(const struct skge_hw *hw, int reg) @@ -2892,114 +2541,87 @@ static inline void skge_write8(const struct skge_hw *hw, int reg, u8 val) } /* MAC Related Registers inside the device. */ -#define SKGEMAC_REG(port,reg) (((port)<<7)+(reg)) - -/* PCI config space can be accessed via memory mapped space */ -#define SKGEPCI_REG(reg) ((reg)+ 0x380) - -#define SKGEXM_REG(port, reg) \ +#define SK_REG(port,reg) (((port)<<7)+(reg)) +#define SK_XMAC_REG(port, reg) \ ((BASE_XMAC_1 + (port) * (BASE_XMAC_2 - BASE_XMAC_1)) | (reg) << 1) -static inline u32 skge_xm_read32(const struct skge_hw *hw, int port, int reg) -{ - return skge_read32(hw, SKGEXM_REG(port,reg)); -} - -static inline u16 skge_xm_read16(const struct skge_hw *hw, int port, int reg) +static inline u32 xm_read32(const struct skge_hw *hw, int port, int reg) { - return skge_read16(hw, SKGEXM_REG(port,reg)); + u32 v; + v = skge_read16(hw, SK_XMAC_REG(port, reg)); + v |= (u32)skge_read16(hw, SK_XMAC_REG(port, reg+2)) << 16; + return v; } -static inline u8 skge_xm_read8(const struct skge_hw *hw, int port, int reg) +static inline u16 xm_read16(const struct skge_hw *hw, int port, int reg) { - return skge_read8(hw, SKGEXM_REG(port,reg)); + return skge_read16(hw, SK_XMAC_REG(port,reg)); } -static inline void skge_xm_write32(const struct skge_hw *hw, int port, int r, u32 v) +static inline void xm_write32(const struct skge_hw *hw, int port, int r, u32 v) { - skge_write32(hw, SKGEXM_REG(port,r), v); + skge_write16(hw, SK_XMAC_REG(port,r), v & 0xffff); + skge_write16(hw, SK_XMAC_REG(port,r+2), v >> 16); } -static inline void skge_xm_write16(const struct skge_hw *hw, int port, int r, u16 v) +static inline void xm_write16(const struct skge_hw *hw, int port, int r, u16 v) { - skge_write16(hw, SKGEXM_REG(port,r), v); + skge_write16(hw, SK_XMAC_REG(port,r), v); } -static inline void skge_xm_write8(const struct skge_hw *hw, int port, int r, u8 v) -{ - skge_write8(hw, SKGEXM_REG(port,r), v); -} - -static inline void skge_xm_outhash(const struct skge_hw *hw, int port, int reg, +static inline void xm_outhash(const struct skge_hw *hw, int port, int reg, const u8 *hash) { - skge_xm_write16(hw, port, reg, - (u16)hash[0] | ((u16)hash[1] << 8)); - skge_xm_write16(hw, port, reg+2, - (u16)hash[2] | ((u16)hash[3] << 8)); - skge_xm_write16(hw, port, reg+4, - (u16)hash[4] | ((u16)hash[5] << 8)); - skge_xm_write16(hw, port, reg+6, - (u16)hash[6] | ((u16)hash[7] << 8)); + xm_write16(hw, port, reg, (u16)hash[0] | ((u16)hash[1] << 8)); + xm_write16(hw, port, reg+2, (u16)hash[2] | ((u16)hash[3] << 8)); + xm_write16(hw, port, reg+4, (u16)hash[4] | ((u16)hash[5] << 8)); + xm_write16(hw, port, reg+6, (u16)hash[6] | ((u16)hash[7] << 8)); } -static inline void skge_xm_outaddr(const struct skge_hw *hw, int port, int reg, +static inline void xm_outaddr(const struct skge_hw *hw, int port, int reg, const u8 *addr) { - skge_xm_write16(hw, port, reg, - (u16)addr[0] | ((u16)addr[1] << 8)); - skge_xm_write16(hw, port, reg, - (u16)addr[2] | ((u16)addr[3] << 8)); - skge_xm_write16(hw, port, reg, - (u16)addr[4] | ((u16)addr[5] << 8)); + xm_write16(hw, port, reg, (u16)addr[0] | ((u16)addr[1] << 8)); + xm_write16(hw, port, reg+2, (u16)addr[2] | ((u16)addr[3] << 8)); + xm_write16(hw, port, reg+4, (u16)addr[4] | ((u16)addr[5] << 8)); } +#define SK_GMAC_REG(port,reg) \ + (BASE_GMAC_1 + (port) * (BASE_GMAC_2-BASE_GMAC_1) + (reg)) -#define SKGEGMA_REG(port,reg) \ - ((reg) + BASE_GMAC_1 + \ - (port) * (BASE_GMAC_2-BASE_GMAC_1)) - -static inline u16 skge_gma_read16(const struct skge_hw *hw, int port, int reg) +static inline u16 gma_read16(const struct skge_hw *hw, int port, int reg) { - return skge_read16(hw, SKGEGMA_REG(port,reg)); + return skge_read16(hw, SK_GMAC_REG(port,reg)); } -static inline u32 skge_gma_read32(const struct skge_hw *hw, int port, int reg) +static inline u32 gma_read32(const struct skge_hw *hw, int port, int reg) { - return (u32) skge_read16(hw, SKGEGMA_REG(port,reg)) - | ((u32)skge_read16(hw, SKGEGMA_REG(port,reg+4)) << 16); + return (u32) skge_read16(hw, SK_GMAC_REG(port,reg)) + | ((u32)skge_read16(hw, SK_GMAC_REG(port,reg+4)) << 16); } -static inline u8 skge_gma_read8(const struct skge_hw *hw, int port, int reg) +static inline void gma_write16(const struct skge_hw *hw, int port, int r, u16 v) { - return skge_read8(hw, SKGEGMA_REG(port,reg)); + skge_write16(hw, SK_GMAC_REG(port,r), v); } -static inline void skge_gma_write16(const struct skge_hw *hw, int port, int r, u16 v) +static inline void gma_write32(const struct skge_hw *hw, int port, int r, u32 v) { - skge_write16(hw, SKGEGMA_REG(port,r), v); + skge_write16(hw, SK_GMAC_REG(port, r), (u16) v); + skge_write32(hw, SK_GMAC_REG(port, r+4), (u16)(v >> 16)); } -static inline void skge_gma_write32(const struct skge_hw *hw, int port, int r, u32 v) +static inline void gma_write8(const struct skge_hw *hw, int port, int r, u8 v) { - skge_write16(hw, SKGEGMA_REG(port, r), (u16) v); - skge_write32(hw, SKGEGMA_REG(port, r+4), (u16)(v >> 16)); + skge_write8(hw, SK_GMAC_REG(port,r), v); } -static inline void skge_gma_write8(const struct skge_hw *hw, int port, int r, u8 v) -{ - skge_write8(hw, SKGEGMA_REG(port,r), v); -} - -static inline void skge_gm_set_addr(struct skge_hw *hw, int port, int reg, +static inline void gma_set_addr(struct skge_hw *hw, int port, int reg, const u8 *addr) { - skge_gma_write16(hw, port, reg, - (u16) addr[0] | ((u16) addr[1] << 8)); - skge_gma_write16(hw, port, reg+4, - (u16) addr[2] | ((u16) addr[3] << 8)); - skge_gma_write16(hw, port, reg+8, - (u16) addr[4] | ((u16) addr[5] << 8)); + gma_write16(hw, port, reg, (u16) addr[0] | ((u16) addr[1] << 8)); + gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8)); + gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8)); } - + #endif diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index cfb9d3cdb04..1438fdd2082 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1998,7 +1998,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr) if (retval) goto err_out; - set_irq_type(dev->irq, IRQT_RISING); + set_irq_type(dev->irq, SMC_IRQ_TRIGGER_TYPE); #ifdef SMC_USE_PXA_DMA { diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 946528e6b74..7089d86e857 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -182,6 +182,16 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) +#include <asm/mach-types.h> +#include <asm/arch/cpu.h> + +#define SMC_IRQ_TRIGGER_TYPE (( \ + machine_is_omap_h2() \ + || machine_is_omap_h3() \ + || (machine_is_omap_innovator() && !cpu_is_omap150()) \ + ) ? IRQT_FALLING : IRQT_RISING) + + #elif defined(CONFIG_SH_SH4202_MICRODEV) #define SMC_CAN_USE_8BIT 0 @@ -300,6 +310,9 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l) #endif +#ifndef SMC_IRQ_TRIGGER_TYPE +#define SMC_IRQ_TRIGGER_TYPE IRQT_RISING +#endif #ifdef SMC_USE_PXA_DMA /* diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 9a547ca9c86..c5623694d10 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -304,26 +304,19 @@ static int ahci_port_start(struct ata_port *ap) struct device *dev = ap->host_set->dev; struct ahci_host_priv *hpriv = ap->host_set->private_data; struct ahci_port_priv *pp; - int rc; void *mem, *mmio = ap->host_set->mmio_base; void *port_mmio = ahci_port_base(mmio, ap->port_no); dma_addr_t mem_dma; - rc = ata_port_start(ap); - if (rc) - return rc; - pp = kmalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) { - rc = -ENOMEM; - goto err_out; - } + if (!pp) + return -ENOMEM; memset(pp, 0, sizeof(*pp)); mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL); if (!mem) { - rc = -ENOMEM; - goto err_out_kfree; + kfree(pp); + return -ENOMEM; } memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); @@ -373,12 +366,6 @@ static int ahci_port_start(struct ata_port *ap) readl(port_mmio + PORT_CMD); /* flush */ return 0; - -err_out_kfree: - kfree(pp); -err_out: - ata_port_stop(ap); - return rc; } @@ -404,7 +391,6 @@ static void ahci_port_stop(struct ata_port *ap) dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, pp->cmd_slot, pp->cmd_slot_dma); kfree(pp); - ata_port_stop(ap); } static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 36b401fee1f..cb535fa185b 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1408,7 +1408,9 @@ void __sata_phy_reset(struct ata_port *ap) if (ap->flags & ATA_FLAG_SATA_RESET) { /* issue phy wake/reset */ scr_write_flush(ap, SCR_CONTROL, 0x301); - udelay(400); /* FIXME: a guess */ + /* Couldn't find anything in SATA I/II specs, but + * AHCI-1.1 10.4.2 says at least 1 ms. */ + mdelay(1); } scr_write_flush(ap, SCR_CONTROL, 0x300); /* phy wake/clear reset */ @@ -1920,6 +1922,7 @@ static const char * ata_dma_blacklist [] = { "HITACHI CDR-8335", "HITACHI CDR-8435", "Toshiba CD-ROM XM-6202B", + "TOSHIBA CD-ROM XM-1702BC", "CD-532E-A", "E-IDE CD-ROM CR-840", "CD-ROM Drive/F5A", @@ -1927,7 +1930,6 @@ static const char * ata_dma_blacklist [] = { "SAMSUNG CD-ROM SC-148C", "SAMSUNG CD-ROM SC", "SanDisk SDP3B-64", - "SAMSUNG CD-ROM SN-124", "ATAPI CD-ROM DRIVE 40X MAXIMUM", "_NEC DV5800A", }; diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index a1478258d00..8a2df4dfbc5 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -65,7 +65,7 @@ static inline int is_zero_ether_addr(const u8 *addr) */ static inline int is_multicast_ether_addr(const u8 *addr) { - return addr[0] & 0x01; + return ((addr[0] != 0xff) && (0x01 & addr[0])); } /** diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 7fe57f957a5..151c4f20355 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -94,6 +94,8 @@ struct eapol { u16 length; } __attribute__ ((packed)); +#define IEEE80211_1ADDR_LEN 10 +#define IEEE80211_2ADDR_LEN 16 #define IEEE80211_3ADDR_LEN 24 #define IEEE80211_4ADDR_LEN 30 #define IEEE80211_FCS_LEN 4 @@ -300,23 +302,6 @@ struct ieee80211_snap_hdr { #define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9 -/* Information Element IDs */ -#define WLAN_EID_SSID 0 -#define WLAN_EID_SUPP_RATES 1 -#define WLAN_EID_FH_PARAMS 2 -#define WLAN_EID_DS_PARAMS 3 -#define WLAN_EID_CF_PARAMS 4 -#define WLAN_EID_TIM 5 -#define WLAN_EID_IBSS_PARAMS 6 -#define WLAN_EID_CHALLENGE 16 -#define WLAN_EID_RSN 48 -#define WLAN_EID_GENERIC 221 - -#define IEEE80211_MGMT_HDR_LEN 24 -#define IEEE80211_DATA_HDR3_LEN 24 -#define IEEE80211_DATA_HDR4_LEN 30 - - #define IEEE80211_STATMASK_SIGNAL (1<<0) #define IEEE80211_STATMASK_RSSI (1<<1) #define IEEE80211_STATMASK_NOISE (1<<2) @@ -441,6 +426,8 @@ struct ieee80211_stats { struct ieee80211_device; +#include "ieee80211_crypt.h" + #define SEC_KEY_1 (1<<0) #define SEC_KEY_2 (1<<1) #define SEC_KEY_3 (1<<2) @@ -488,15 +475,6 @@ Total: 28-2340 bytes */ -struct ieee80211_header_data { - u16 frame_ctl; - u16 duration_id; - u8 addr1[6]; - u8 addr2[6]; - u8 addr3[6]; - u16 seq_ctrl; -}; - #define BEACON_PROBE_SSID_ID_POSITION 12 /* Management Frame Information Element Types */ @@ -541,7 +519,7 @@ struct ieee80211_info_element { */ struct ieee80211_authentication { - struct ieee80211_header_data header; + struct ieee80211_hdr_3addr header; u16 algorithm; u16 transaction; u16 status; @@ -550,7 +528,7 @@ struct ieee80211_authentication { struct ieee80211_probe_response { - struct ieee80211_header_data header; + struct ieee80211_hdr_3addr header; u32 time_stamp[2]; u16 beacon_interval; u16 capability; @@ -648,12 +626,6 @@ enum ieee80211_state { #define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5] -extern inline int is_broadcast_ether_addr(const u8 *addr) -{ - return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) && \ - (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff)); -} - #define CFG_IEEE80211_RESERVE_FCS (1<<0) #define CFG_IEEE80211_COMPUTE_FCS (1<<1) @@ -787,21 +759,21 @@ extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mod extern inline int ieee80211_get_hdrlen(u16 fc) { - int hdrlen = 24; + int hdrlen = IEEE80211_3ADDR_LEN; switch (WLAN_FC_GET_TYPE(fc)) { case IEEE80211_FTYPE_DATA: if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS)) - hdrlen = 30; /* Addr4 */ + hdrlen = IEEE80211_4ADDR_LEN; break; case IEEE80211_FTYPE_CTL: switch (WLAN_FC_GET_STYPE(fc)) { case IEEE80211_STYPE_CTS: case IEEE80211_STYPE_ACK: - hdrlen = 10; + hdrlen = IEEE80211_1ADDR_LEN; break; default: - hdrlen = 16; + hdrlen = IEEE80211_2ADDR_LEN; break; } break; diff --git a/init/main.c b/init/main.c index d324801729b..b5e421e39ed 100644 --- a/init/main.c +++ b/init/main.c @@ -383,6 +383,13 @@ static void noinline rest_init(void) numa_default_policy(); unlock_kernel(); preempt_enable_no_resched(); + + /* + * The boot idle thread must execute schedule() + * at least one to get things moving: + */ + schedule(); + cpu_idle(); } diff --git a/kernel/kexec.c b/kernel/kexec.c index 7843548cf2d..cdd4dcd8fb6 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -241,7 +241,7 @@ static int kimage_normal_alloc(struct kimage **rimage, unsigned long entry, static int kimage_crash_alloc(struct kimage **rimage, unsigned long entry, unsigned long nr_segments, - struct kexec_segment *segments) + struct kexec_segment __user *segments) { int result; struct kimage *image; @@ -650,7 +650,7 @@ static kimage_entry_t *kimage_dst_used(struct kimage *image, } } - return 0; + return NULL; } static struct page *kimage_alloc_page(struct kimage *image, @@ -696,7 +696,7 @@ static struct page *kimage_alloc_page(struct kimage *image, /* Allocate a page, if we run out of memory give up */ page = kimage_alloc_pages(gfp_mask, 0); if (!page) - return 0; + return NULL; /* If the page cannot be used file it away */ if (page_to_pfn(page) > (KEXEC_SOURCE_MEMORY_LIMIT >> PAGE_SHIFT)) { @@ -754,7 +754,7 @@ static int kimage_load_normal_segment(struct kimage *image, unsigned long maddr; unsigned long ubytes, mbytes; int result; - unsigned char *buf; + unsigned char __user *buf; result = 0; buf = segment->buf; @@ -818,7 +818,7 @@ static int kimage_load_crash_segment(struct kimage *image, unsigned long maddr; unsigned long ubytes, mbytes; int result; - unsigned char *buf; + unsigned char __user *buf; result = 0; buf = segment->buf; diff --git a/kernel/sched.c b/kernel/sched.c index e2b0d3e4dd0..5f2182d4224 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4166,6 +4166,14 @@ void show_state(void) read_unlock(&tasklist_lock); } +/** + * init_idle - set up an idle thread for a given CPU + * @idle: task in question + * @cpu: cpu the idle task belongs to + * + * NOTE: this function does not set the idle thread's NEED_RESCHED + * flag, to make booting more robust. + */ void __devinit init_idle(task_t *idle, int cpu) { runqueue_t *rq = cpu_rq(cpu); @@ -4183,7 +4191,6 @@ void __devinit init_idle(task_t *idle, int cpu) #if defined(CONFIG_SMP) && defined(__ARCH_WANT_UNLOCKED_CTXSW) idle->oncpu = 1; #endif - set_tsk_need_resched(idle); spin_unlock_irqrestore(&rq->lock, flags); /* Set the preempt count _outside_ the spinlocks! */ |